diff options
Diffstat (limited to 'Documentation/pps/pps.txt')
| -rw-r--r-- | Documentation/pps/pps.txt | 172 |
1 files changed, 172 insertions, 0 deletions
diff --git a/Documentation/pps/pps.txt b/Documentation/pps/pps.txt new file mode 100644 index 00000000000..125f4ab4899 --- /dev/null +++ b/Documentation/pps/pps.txt @@ -0,0 +1,172 @@ + + PPS - Pulse Per Second + ---------------------- + +(C) Copyright 2007 Rodolfo Giometti <giometti@enneenne.com> + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + + + +Overview +-------- + +LinuxPPS provides a programming interface (API) to define in the +system several PPS sources. + +PPS means "pulse per second" and a PPS source is just a device which +provides a high precision signal each second so that an application +can use it to adjust system clock time. + +A PPS source can be connected to a serial port (usually to the Data +Carrier Detect pin) or to a parallel port (ACK-pin) or to a special +CPU's GPIOs (this is the common case in embedded systems) but in each +case when a new pulse arrives the system must apply to it a timestamp +and record it for userland. + +Common use is the combination of the NTPD as userland program, with a +GPS receiver as PPS source, to obtain a wallclock-time with +sub-millisecond synchronisation to UTC. + + +RFC considerations +------------------ + +While implementing a PPS API as RFC 2783 defines and using an embedded +CPU GPIO-Pin as physical link to the signal, I encountered a deeper +problem: + + At startup it needs a file descriptor as argument for the function + time_pps_create(). + +This implies that the source has a /dev/... entry. This assumption is +ok for the serial and parallel port, where you can do something +useful besides(!) the gathering of timestamps as it is the central +task for a PPS-API. But this assumption does not work for a single +purpose GPIO line. In this case even basic file-related functionality +(like read() and write()) makes no sense at all and should not be a +precondition for the use of a PPS-API. + +The problem can be simply solved if you consider that a PPS source is +not always connected with a GPS data source. + +So your programs should check if the GPS data source (the serial port +for instance) is a PPS source too, and if not they should provide the +possibility to open another device as PPS source. + +In LinuxPPS the PPS sources are simply char devices usually mapped +into files /dev/pps0, /dev/pps1, etc.. + + +Coding example +-------------- + +To register a PPS source into the kernel you should define a struct +pps_source_info_s as follows: + + static struct pps_source_info pps_ktimer_info = { + .name = "ktimer", + .path = "", + .mode = PPS_CAPTUREASSERT | PPS_OFFSETASSERT | \ + PPS_ECHOASSERT | \ + PPS_CANWAIT | PPS_TSFMT_TSPEC, + .echo = pps_ktimer_echo, + .owner = THIS_MODULE, + }; + +and then calling the function pps_register_source() in your +intialization routine as follows: + + source = pps_register_source(&pps_ktimer_info, + PPS_CAPTUREASSERT | PPS_OFFSETASSERT); + +The pps_register_source() prototype is: + + int pps_register_source(struct pps_source_info_s *info, int default_params) + +where "info" is a pointer to a structure that describes a particular +PPS source, "default_params" tells the system what the initial default +parameters for the device should be (it is obvious that these parameters +must be a subset of ones defined in the struct +pps_source_info_s which describe the capabilities of the driver). + +Once you have registered a new PPS source into the system you can +signal an assert event (for example in the interrupt handler routine) +just using: + + pps_event(source, &ts, PPS_CAPTUREASSERT, ptr) + +where "ts" is the event's timestamp. + +The same function may also run the defined echo function +(pps_ktimer_echo(), passing to it the "ptr" pointer) if the user +asked for that... etc.. + +Please see the file drivers/pps/clients/ktimer.c for example code. + + +SYSFS support +------------- + +If the SYSFS filesystem is enabled in the kernel it provides a new class: + + $ ls /sys/class/pps/ + pps0/ pps1/ pps2/ + +Every directory is the ID of a PPS sources defined in the system and +inside you find several files: + + $ ls /sys/class/pps/pps0/ + assert clear echo mode name path subsystem@ uevent + +Inside each "assert" and "clear" file you can find the timestamp and a +sequence number: + + $ cat /sys/class/pps/pps0/assert + 1170026870.983207967#8 + +Where before the "#" is the timestamp in seconds; after it is the +sequence number. Other files are: + +* echo: reports if the PPS source has an echo function or not; + +* mode: reports available PPS functioning modes; + +* name: reports the PPS source's name; + +* path: reports the PPS source's device path, that is the device the + PPS source is connected to (if it exists). + + +Testing the PPS support +----------------------- + +In order to test the PPS support even without specific hardware you can use +the ktimer driver (see the client subsection in the PPS configuration menu) +and the userland tools provided into Documentaion/pps/ directory. + +Once you have enabled the compilation of ktimer just modprobe it (if +not statically compiled): + + # modprobe ktimer + +and the run ppstest as follow: + + $ ./ppstest /dev/pps0 + trying PPS source "/dev/pps1" + found PPS source "/dev/pps1" + ok, found 1 source(s), now start fetching data... + source 0 - assert 1186592699.388832443, sequence: 364 - clear 0.000000000, sequence: 0 + source 0 - assert 1186592700.388931295, sequence: 365 - clear 0.000000000, sequence: 0 + source 0 - assert 1186592701.389032765, sequence: 366 - clear 0.000000000, sequence: 0 + +Please, note that to compile userland programs you need the file timepps.h +(see Documentation/pps/). |