diff options
118 files changed, 1123 insertions, 480 deletions
diff --git a/Documentation/i2c/writing-clients b/Documentation/i2c/writing-clients index 3219ee0dbfe..5ebf5af1d71 100644 --- a/Documentation/i2c/writing-clients +++ b/Documentation/i2c/writing-clients @@ -74,6 +74,11 @@ structure at all. You should use this to keep device-specific data. /* retrieve the value */ void *i2c_get_clientdata(const struct i2c_client *client); +Note that starting with kernel 2.6.34, you don't have to set the `data' field +to NULL in remove() or if probe() failed anymore. The i2c-core does this +automatically on these occasions. Those are also the only times the core will +touch this field. + Accessing the client ==================== diff --git a/Documentation/spi/spidev_test.c b/Documentation/spi/spidev_test.c index 10abd3773e4..16feda90146 100644 --- a/Documentation/spi/spidev_test.c +++ b/Documentation/spi/spidev_test.c @@ -58,7 +58,7 @@ static void transfer(int fd) }; ret = ioctl(fd, SPI_IOC_MESSAGE(1), &tr); - if (ret == 1) + if (ret < 1) pabort("can't send spi message"); for (ret = 0; ret < ARRAY_SIZE(tx); ret++) { diff --git a/arch/arm/plat-omap/include/plat/usb.h b/arch/arm/plat-omap/include/plat/usb.h index 568578db93b..876ca8d5e92 100644 --- a/arch/arm/plat-omap/include/plat/usb.h +++ b/arch/arm/plat-omap/include/plat/usb.h @@ -46,7 +46,7 @@ struct ehci_hcd_omap_platform_data { struct omap_musb_board_data { u8 interface_type; u8 mode; - u8 power; + u16 power; }; enum musb_interface {MUSB_INTERFACE_ULPI, MUSB_INTERFACE_UTMI}; diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 29e86923d1b..7e6fd1cbd3f 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -49,7 +49,7 @@ config AR7 family: TNETD7100, 7200 and 7300. config BCM47XX - bool "BCM47XX based boards" + bool "Broadcom BCM47XX based boards" select CEVT_R4K select CSRC_R4K select DMA_NONCOHERENT @@ -509,6 +509,7 @@ config SIBYTE_SWARM bool "Sibyte BCM91250A-SWARM" select BOOT_ELF32 select DMA_COHERENT + select HAVE_PATA_PLATFORM select NR_CPUS_DEFAULT_2 select SIBYTE_SB1250 select SWAP_IO_SPACE @@ -523,6 +524,7 @@ config SIBYTE_LITTLESUR depends on EXPERIMENTAL select BOOT_ELF32 select DMA_COHERENT + select HAVE_PATA_PLATFORM select NR_CPUS_DEFAULT_2 select SIBYTE_SB1250 select SWAP_IO_SPACE @@ -1305,6 +1307,33 @@ config CPU_CAVIUM_OCTEON endchoice +if CPU_LOONGSON2F +config CPU_NOP_WORKAROUNDS + bool + +config CPU_JUMP_WORKAROUNDS + bool + +config CPU_LOONGSON2F_WORKAROUNDS + bool "Loongson 2F Workarounds" + default y + select CPU_NOP_WORKAROUNDS + select CPU_JUMP_WORKAROUNDS + help + Loongson 2F01 / 2F02 processors have the NOP & JUMP issues which + require workarounds. Without workarounds the system may hang + unexpectedly. For more information please refer to the gas + -mfix-loongson2f-nop and -mfix-loongson2f-jump options. + + Loongson 2F03 and later have fixed these issues and no workarounds + are needed. The workarounds have no significant side effect on them + but may decrease the performance of the system so this option should + be disabled unless the kernel is intended to be run on 2F01 or 2F02 + systems. + + If unsure, please say Y. +endif # CPU_LOONGSON2F + config SYS_SUPPORTS_ZBOOT bool select HAVE_KERNEL_GZIP diff --git a/arch/mips/Makefile b/arch/mips/Makefile index 2f2eac23332..0b9c01add0a 100644 --- a/arch/mips/Makefile +++ b/arch/mips/Makefile @@ -136,6 +136,19 @@ cflags-$(CONFIG_CPU_LOONGSON2E) += \ $(call cc-option,-march=loongson2e,-march=r4600) cflags-$(CONFIG_CPU_LOONGSON2F) += \ $(call cc-option,-march=loongson2f,-march=r4600) +# enable the workarounds for loongson2f +ifdef CONFIG_CPU_LOONGSON2F_WORKAROUNDS + ifeq ($(call as-option,-Wa$(comma)-mfix-loongson2f-nop,),) + $(error only binutils >= 2.20.2 have needed option -mfix-loongson2f-nop) + else + cflags-$(CONFIG_CPU_NOP_WORKAROUNDS) += -Wa$(comma)-mfix-loongson2f-nop + endif + ifeq ($(call as-option,-Wa$(comma)-mfix-loongson2f-jump,),) + $(error only binutils >= 2.20.2 have needed option -mfix-loongson2f-jump) + else + cflags-$(CONFIG_CPU_JUMP_WORKAROUNDS) += -Wa$(comma)-mfix-loongson2f-jump + endif +endif cflags-$(CONFIG_CPU_MIPS32_R1) += $(call cc-option,-march=mips32,-mips32 -U_MIPS_ISA -D_MIPS_ISA=_MIPS_ISA_MIPS32) \ -Wa,-mips32 -Wa,--trap diff --git a/arch/mips/alchemy/devboards/db1200/setup.c b/arch/mips/alchemy/devboards/db1200/setup.c index be7e92ea01f..88761954755 100644 --- a/arch/mips/alchemy/devboards/db1200/setup.c +++ b/arch/mips/alchemy/devboards/db1200/setup.c @@ -66,12 +66,16 @@ static int __init db1200_arch_init(void) set_irq_type(AU1200_GPIO7_INT, IRQF_TRIGGER_LOW); bcsr_init_irq(DB1200_INT_BEGIN, DB1200_INT_END, AU1200_GPIO7_INT); - /* do not autoenable these: CPLD has broken edge int handling, - * and the CD handler setup requires manual enabling to work - * around that. + /* insert/eject pairs: one of both is always screaming. To avoid + * issues they must not be automatically enabled when initially + * requested. */ irq_to_desc(DB1200_SD0_INSERT_INT)->status |= IRQ_NOAUTOEN; irq_to_desc(DB1200_SD0_EJECT_INT)->status |= IRQ_NOAUTOEN; + irq_to_desc(DB1200_PC0_INSERT_INT)->status |= IRQ_NOAUTOEN; + irq_to_desc(DB1200_PC0_EJECT_INT)->status |= IRQ_NOAUTOEN; + irq_to_desc(DB1200_PC1_INSERT_INT)->status |= IRQ_NOAUTOEN; + irq_to_desc(DB1200_PC1_EJECT_INT)->status |= IRQ_NOAUTOEN; return 0; } diff --git a/arch/mips/configs/bcm63xx_defconfig b/arch/mips/configs/bcm63xx_defconfig index 7fee0273c82..6389ca0fdc6 100644 --- a/arch/mips/configs/bcm63xx_defconfig +++ b/arch/mips/configs/bcm63xx_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc6 -# Sun May 31 20:17:18 2009 +# Linux kernel version: 2.6.34-rc2 +# Tue Mar 23 10:36:32 2010 # CONFIG_MIPS=y @@ -9,13 +9,14 @@ CONFIG_MIPS=y # Machine selection # # CONFIG_MACH_ALCHEMY is not set +# CONFIG_AR7 is not set # CONFIG_BCM47XX is not set CONFIG_BCM63XX=y # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set # CONFIG_LASAT is not set -# CONFIG_LEMOTE_FULONG is not set +# CONFIG_MACH_LOONGSON is not set # CONFIG_MIPS_MALTA is not set # CONFIG_MIPS_SIM is not set # CONFIG_NEC_MARKEINS is not set @@ -26,6 +27,7 @@ CONFIG_BCM63XX=y # CONFIG_PNX8550_STB810 is not set # CONFIG_PMC_MSP is not set # CONFIG_PMC_YOSEMITE is not set +# CONFIG_POWERTV is not set # CONFIG_SGI_IP22 is not set # CONFIG_SGI_IP27 is not set # CONFIG_SGI_IP28 is not set @@ -45,13 +47,17 @@ CONFIG_BCM63XX=y # CONFIG_WR_PPMC is not set # CONFIG_CAVIUM_OCTEON_SIMULATOR is not set # CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set +# CONFIG_ALCHEMY_GPIO_INDIRECT is not set # # CPU support # +CONFIG_BCM63XX_CPU_6338=y +CONFIG_BCM63XX_CPU_6345=y CONFIG_BCM63XX_CPU_6348=y CONFIG_BCM63XX_CPU_6358=y CONFIG_BOARD_BCM963XX=y +CONFIG_LOONGSON_UART_BASE=y CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_ARCH_HAS_ILOG2_U32 is not set # CONFIG_ARCH_HAS_ILOG2_U64 is not set @@ -69,10 +75,8 @@ CONFIG_CEVT_R4K=y CONFIG_CSRC_R4K_LIB=y CONFIG_CSRC_R4K=y CONFIG_DMA_NONCOHERENT=y -CONFIG_DMA_NEED_PCI_MAP_STATE=y -CONFIG_EARLY_PRINTK=y +CONFIG_NEED_DMA_MAP_STATE=y CONFIG_SYS_HAS_EARLY_PRINTK=y -# CONFIG_HOTPLUG_CPU is not set # CONFIG_NO_IOPORT is not set CONFIG_GENERIC_GPIO=y CONFIG_CPU_BIG_ENDIAN=y @@ -85,7 +89,8 @@ CONFIG_MIPS_L1_CACHE_SHIFT=5 # # CPU selection # -# CONFIG_CPU_LOONGSON2 is not set +# CONFIG_CPU_LOONGSON2E is not set +# CONFIG_CPU_LOONGSON2F is not set CONFIG_CPU_MIPS32_R1=y # CONFIG_CPU_MIPS32_R2 is not set # CONFIG_CPU_MIPS64_R1 is not set @@ -128,7 +133,7 @@ CONFIG_CPU_HAS_PREFETCH=y CONFIG_MIPS_MT_DISABLED=y # CONFIG_MIPS_MT_SMP is not set # CONFIG_MIPS_MT_SMTC is not set -CONFIG_CPU_HAS_LLSC=y +# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set CONFIG_CPU_HAS_SYNC=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y @@ -146,9 +151,8 @@ CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y -CONFIG_HAVE_MLOCK=y -CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_TICK_ONESHOT=y CONFIG_NO_HZ=y # CONFIG_HIGH_RES_TIMERS is not set @@ -170,6 +174,7 @@ CONFIG_PREEMPT_NONE=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -189,15 +194,12 @@ CONFIG_LOCALVERSION="" # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y # CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_PREEMPT_RCU is not set +CONFIG_TINY_RCU=y # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=17 -# CONFIG_GROUP_SCHED is not set -# CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set @@ -205,11 +207,11 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_BLK_DEV_INITRD is not set CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -223,6 +225,10 @@ CONFIG_BASE_FULL=y # CONFIG_EVENTFD is not set # CONFIG_SHMEM is not set # CONFIG_AIO is not set + +# +# Kernel Performance Events And Counters +# # CONFIG_VM_EVENT_COUNTERS is not set CONFIG_PCI_QUIRKS=y # CONFIG_SLUB_DEBUG is not set @@ -231,14 +237,17 @@ CONFIG_COMPAT_BRK=y CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y + +# +# GCOV-based kernel profiling +# # CONFIG_SLOW_WORK is not set -# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set +CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_BASE_SMALL=0 # CONFIG_MODULES is not set CONFIG_BLOCK=y -# CONFIG_LBD is not set +CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -246,14 +255,41 @@ CONFIG_BLOCK=y # IO Schedulers # CONFIG_IOSCHED_NOOP=y -# CONFIG_IOSCHED_AS is not set # CONFIG_IOSCHED_DEADLINE is not set # CONFIG_IOSCHED_CFQ is not set -# CONFIG_DEFAULT_AS is not set # CONFIG_DEFAULT_DEADLINE is not set # CONFIG_DEFAULT_CFQ is not set CONFIG_DEFAULT_NOOP=y CONFIG_DEFAULT_IOSCHED="noop" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +CONFIG_INLINE_SPIN_UNLOCK=y +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +CONFIG_INLINE_SPIN_UNLOCK_IRQ=y +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +CONFIG_INLINE_READ_UNLOCK=y +# CONFIG_INLINE_READ_UNLOCK_BH is not set +CONFIG_INLINE_READ_UNLOCK_IRQ=y +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +CONFIG_INLINE_WRITE_UNLOCK=y +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +CONFIG_INLINE_WRITE_UNLOCK_IRQ=y +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set # CONFIG_FREEZER is not set # @@ -263,15 +299,12 @@ CONFIG_HW_HAS_PCI=y CONFIG_PCI=y CONFIG_PCI_DOMAINS=y # CONFIG_ARCH_SUPPORTS_MSI is not set -# CONFIG_PCI_LEGACY is not set # CONFIG_PCI_STUB is not set # CONFIG_PCI_IOV is not set CONFIG_MMU=y CONFIG_PCCARD=y -# CONFIG_PCMCIA_DEBUG is not set CONFIG_PCMCIA=y CONFIG_PCMCIA_LOAD_CIS=y -CONFIG_PCMCIA_IOCTL=y CONFIG_CARDBUS=y # @@ -295,6 +328,7 @@ CONFIG_TRAD_SIGNALS=y # # Power management options # +CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PM is not set CONFIG_NET=y @@ -333,6 +367,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -347,6 +382,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -359,7 +395,27 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_WIRELESS is not set +CONFIG_WIRELESS=y +CONFIG_WEXT_CORE=y +CONFIG_WEXT_PROC=y +CONFIG_CFG80211=y +CONFIG_NL80211_TESTMODE=y +# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set +# CONFIG_CFG80211_REG_DEBUG is not set +CONFIG_CFG80211_DEFAULT_PS=y +# CONFIG_CFG80211_INTERNAL_REGDB is not set +CONFIG_CFG80211_WEXT=y +CONFIG_WIRELESS_EXT_SYSFS=y +# CONFIG_LIB80211 is not set +CONFIG_MAC80211=y +# CONFIG_MAC80211_RC_PID is not set +CONFIG_MAC80211_RC_MINSTREL=y +# CONFIG_MAC80211_RC_DEFAULT_PID is not set +CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y +CONFIG_MAC80211_RC_DEFAULT="minstrel" +# CONFIG_MAC80211_MESH is not set +CONFIG_MAC80211_LEDS=y +# CONFIG_MAC80211_DEBUG_MENU is not set # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -471,6 +527,7 @@ CONFIG_HAVE_IDE=y # # SCSI device support # +CONFIG_SCSI_MOD=y # CONFIG_RAID_ATTRS is not set # CONFIG_SCSI is not set # CONFIG_SCSI_DMA is not set @@ -484,13 +541,16 @@ CONFIG_HAVE_IDE=y # # -# Enable only one of the two stacks, unless you know what you are doing +# You can enable one or both FireWire driver stacks. +# + +# +# The newer stack is recommended. # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set CONFIG_NETDEVICES=y -CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -529,6 +589,7 @@ CONFIG_MII=y # CONFIG_SMC91X is not set # CONFIG_DM9000 is not set # CONFIG_ETHOC is not set +# CONFIG_SMSC911X is not set # CONFIG_DNET is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set @@ -541,17 +602,48 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set +# CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_ATL2 is not set CONFIG_BCM63XX_ENET=y # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set - -# -# Wireless LAN -# -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set +CONFIG_WLAN=y +# CONFIG_PCMCIA_RAYCS is not set +# CONFIG_LIBERTAS_THINFIRM is not set +# CONFIG_ATMEL is not set +# CONFIG_AT76C50X_USB is not set +# CONFIG_AIRO_CS is not set +# CONFIG_PCMCIA_WL3501 is not set +# CONFIG_PRISM54 is not set +# CONFIG_USB_ZD1201 is not set +# CONFIG_USB_NET_RNDIS_WLAN is not set +# CONFIG_RTL8180 is not set +# CONFIG_RTL8187 is not set +# CONFIG_ADM8211 is not set +# CONFIG_MAC80211_HWSIM is not set +# CONFIG_MWL8K is not set +# CONFIG_ATH_COMMON is not set +CONFIG_B43=y +CONFIG_B43_PCI_AUTOSELECT=y +CONFIG_B43_PCICORE_AUTOSELECT=y +# CONFIG_B43_PCMCIA is not set +CONFIG_B43_PIO=y +# CONFIG_B43_PHY_LP is not set +CONFIG_B43_LEDS=y +# CONFIG_B43_DEBUG is not set +# CONFIG_B43LEGACY is not set +# CONFIG_HOSTAP is not set +# CONFIG_IPW2100 is not set +# CONFIG_IPW2200 is not set +# CONFIG_IWLWIFI is not set +# CONFIG_LIBERTAS is not set +# CONFIG_HERMES is not set +# CONFIG_P54_COMMON is not set +# CONFIG_RT2X00 is not set +# CONFIG_WL12XX is not set +# CONFIG_ZD1211RW is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -574,6 +666,7 @@ CONFIG_BCM63XX_ENET=y # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_VMXNET3 is not set # CONFIG_ISDN is not set # CONFIG_PHONE is not set @@ -607,6 +700,7 @@ CONFIG_BCM63XX_ENET=y CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set +# CONFIG_SERIAL_TIMBERDALE is not set CONFIG_SERIAL_BCM63XX=y CONFIG_SERIAL_BCM63XX_CONSOLE=y # CONFIG_UNIX98_PTYS is not set @@ -629,6 +723,11 @@ CONFIG_LEGACY_PTY_COUNT=256 CONFIG_DEVPORT=y # CONFIG_I2C is not set # CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set CONFIG_ARCH_REQUIRE_GPIOLIB=y CONFIG_GPIOLIB=y # CONFIG_GPIO_SYSFS is not set @@ -636,6 +735,8 @@ CONFIG_GPIOLIB=y # # Memory mapped GPIO expanders: # +# CONFIG_GPIO_IT8761E is not set +# CONFIG_GPIO_SCH is not set # # I2C GPIO expanders: @@ -644,16 +745,21 @@ CONFIG_GPIOLIB=y # # PCI GPIO expanders: # +# CONFIG_GPIO_CS5535 is not set # CONFIG_GPIO_BT8XX is not set +# CONFIG_GPIO_LANGWELL is not set # # SPI GPIO expanders: # + +# +# AC97 GPIO expanders: +# # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set CONFIG_SSB_POSSIBLE=y @@ -662,15 +768,16 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_SSB=y CONFIG_SSB_SPROM=y +CONFIG_SSB_BLOCKIO=y CONFIG_SSB_PCIHOST_POSSIBLE=y CONFIG_SSB_PCIHOST=y -# CONFIG_SSB_B43_PCI_BRIDGE is not set +CONFIG_SSB_B43_PCI_BRIDGE=y CONFIG_SSB_PCMCIAHOST_POSSIBLE=y # CONFIG_SSB_PCMCIAHOST is not set # CONFIG_SSB_SILENT is not set # CONFIG_SSB_DEBUG is not set CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y -# CONFIG_SSB_DRIVER_PCICORE is not set +CONFIG_SSB_DRIVER_PCICORE=y # CONFIG_SSB_DRIVER_MIPS is not set # @@ -680,27 +787,15 @@ CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set +# CONFIG_MFD_TIMBERDALE is not set +# CONFIG_LPC_SCH is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -# CONFIG_DAB is not set +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support # +# CONFIG_VGA_ARB is not set # CONFIG_DRM is not set # CONFIG_VGASTATE is not set # CONFIG_VIDEO_OUTPUT_CONTROL is not set @@ -710,11 +805,7 @@ CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y # # Display device support # -CONFIG_DISPLAY_SUPPORT=y - -# -# Display hardware drivers -# +# CONFIG_DISPLAY_SUPPORT is not set # CONFIG_SOUND is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y @@ -741,13 +832,14 @@ CONFIG_USB=y # USB Host Controller Drivers # # CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_XHCI_HCD is not set CONFIG_USB_EHCI_HCD=y # CONFIG_USB_EHCI_ROOT_HUB_TT is not set # CONFIG_USB_EHCI_TT_NEWSCHED is not set -CONFIG_USB_EHCI_BIG_ENDIAN_MMIO=y # CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_ISP1362_HCD is not set CONFIG_USB_OHCI_HCD=y # CONFIG_USB_OHCI_HCD_SSB is not set CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y @@ -796,7 +888,6 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set -# CONFIG_USB_BERRY_CHARGE is not set # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set @@ -807,8 +898,8 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_LD is not set # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_TEST is not set # CONFIG_USB_ISIGHTFW is not set -# CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set # @@ -819,7 +910,29 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set -# CONFIG_NEW_LEDS is not set +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y + +# +# LED drivers +# +CONFIG_LEDS_GPIO=y +CONFIG_LEDS_GPIO_PLATFORM=y +# CONFIG_LEDS_LT3593 is not set +CONFIG_LEDS_TRIGGERS=y + +# +# LED Triggers +# +CONFIG_LEDS_TRIGGER_TIMER=y +# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set +# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set +CONFIG_LEDS_TRIGGER_GPIO=y +CONFIG_LEDS_TRIGGER_DEFAULT_ON=y + +# +# iptables trigger is under Netfilter config (LED target) +# # CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set CONFIG_RTC_LIB=y @@ -827,6 +940,10 @@ CONFIG_RTC_LIB=y # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -838,12 +955,16 @@ CONFIG_RTC_LIB=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -# CONFIG_FILE_LOCKING is not set # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set +# CONFIG_FILE_LOCKING is not set +CONFIG_FSNOTIFY=y # CONFIG_DNOTIFY is not set # CONFIG_INOTIFY is not set +CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set @@ -875,8 +996,6 @@ CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y -CONFIG_TMPFS=y -# CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set CONFIG_MISC_FILESYSTEMS=y @@ -888,6 +1007,7 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set # CONFIG_JFFS2_FS is not set +# CONFIG_LOGFS is not set # CONFIG_CRAMFS is not set # CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set @@ -898,7 +1018,6 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set # CONFIG_NETWORK_FILESYSTEMS is not set # @@ -906,7 +1025,46 @@ CONFIG_MISC_FILESYSTEMS=y # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y -# CONFIG_NLS is not set +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +# CONFIG_NLS_CODEPAGE_437 is not set +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +# CONFIG_NLS_ISO8859_1 is not set +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set # CONFIG_DLM is not set # @@ -918,29 +1076,23 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set # CONFIG_DEBUG_MEMORY_INIT is not set -# CONFIG_RCU_CPU_STALL_DETECTOR is not set CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y +CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# -# CONFIG_IRQSOFF_TRACER is not set -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set -# CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set -# CONFIG_KMEMTRACE is not set -# CONFIG_WORKQUEUE_TRACER is not set -# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_FTRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y +CONFIG_EARLY_PRINTK=y CONFIG_CMDLINE_BOOL=y CONFIG_CMDLINE="console=ttyS0,115200" # CONFIG_CMDLINE_OVERRIDE is not set @@ -951,8 +1103,108 @@ CONFIG_CMDLINE="console=ttyS0,115200" # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set -# CONFIG_CRYPTO is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +# CONFIG_CRYPTO_FIPS is not set +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD2=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG=y +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=y +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=y +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set +# CONFIG_CRYPTO_MD4 is not set +# CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +CONFIG_CRYPTO_AES=y +# CONFIG_CRYPTO_ANUBIS is not set +CONFIG_CRYPTO_ARC4=y +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set +# CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +CONFIG_CRYPTO_ANSI_CPRNG=y +# CONFIG_CRYPTO_HW is not set # CONFIG_BINARY_PRINTF is not set # diff --git a/arch/mips/include/asm/cmpxchg.h b/arch/mips/include/asm/cmpxchg.h index ed9aaaaf074..2d28017e95d 100644 --- a/arch/mips/include/asm/cmpxchg.h +++ b/arch/mips/include/asm/cmpxchg.h @@ -16,7 +16,7 @@ ({ \ __typeof(*(m)) __ret; \ \ - if (kernel_uses_llsc && R10000_LLSC_WAR) { \ + if (kernel_uses_llsc && R10000_LLSC_WAR) { \ __asm__ __volatile__( \ " .set push \n" \ " .set noat \n" \ diff --git a/arch/mips/include/asm/mach-loongson/loongson.h b/arch/mips/include/asm/mach-loongson/loongson.h index 1cf7b1401ee..fcdbe3a4ce1 100644 --- a/arch/mips/include/asm/mach-loongson/loongson.h +++ b/arch/mips/include/asm/mach-loongson/loongson.h @@ -307,7 +307,7 @@ extern unsigned long _loongson_addrwincfg_base; */ #define LOONGSON_ADDRWIN_CFG(s, d, w, src, dst, size) do {\ s##_WIN##w##_BASE = (src); \ - s##_WIN##w##_MMAP = (src) | ADDRWIN_MAP_DST_##d; \ + s##_WIN##w##_MMAP = (dst) | ADDRWIN_MAP_DST_##d; \ s##_WIN##w##_MASK = ~(size-1); \ } while (0) diff --git a/arch/mips/include/asm/pgtable-64.h b/arch/mips/include/asm/pgtable-64.h index 26dc69d792a..1be4b0fa30d 100644 --- a/arch/mips/include/asm/pgtable-64.h +++ b/arch/mips/include/asm/pgtable-64.h @@ -120,9 +120,14 @@ #endif #define FIRST_USER_ADDRESS 0UL -#define VMALLOC_START MAP_BASE +/* + * TLB refill handlers also map the vmalloc area into xuseg. Avoid + * the first couple of pages so NULL pointer dereferences will still + * reliably trap. + */ +#define VMALLOC_START (MAP_BASE + (2 * PAGE_SIZE)) #define VMALLOC_END \ - (VMALLOC_START + \ + (MAP_BASE + \ min(PTRS_PER_PGD * PTRS_PER_PMD * PTRS_PER_PTE * PAGE_SIZE, \ (1UL << cpu_vmbits)) - (1UL << 32)) diff --git a/arch/mips/include/asm/ptrace.h b/arch/mips/include/asm/ptrace.h index ce47118e52b..cdc6a46efd9 100644 --- a/arch/mips/include/asm/ptrace.h +++ b/arch/mips/include/asm/ptrace.h @@ -142,9 +142,9 @@ extern int ptrace_set_watch_regs(struct task_struct *child, extern asmlinkage void do_syscall_trace(struct pt_regs *regs, int entryexit); -extern NORET_TYPE void die(const char *, const struct pt_regs *) ATTRIB_NORET; +extern NORET_TYPE void die(const char *, struct pt_regs *) ATTRIB_NORET; -static inline void die_if_kernel(const char *str, const struct pt_regs *regs) +static inline void die_if_kernel(const char *str, struct pt_regs *regs) { if (unlikely(!user_mode(regs))) die(str, regs); diff --git a/arch/mips/include/asm/stackframe.h b/arch/mips/include/asm/stackframe.h index c8419129e77..58730c5ce4b 100644 --- a/arch/mips/include/asm/stackframe.h +++ b/arch/mips/include/asm/stackframe.h @@ -121,7 +121,7 @@ .endm #else .macro get_saved_sp /* Uniprocessor variation */ -#ifdef CONFIG_CPU_LOONGSON2F +#ifdef CONFIG_CPU_JUMP_WORKAROUNDS /* * Clear BTB (branch target buffer), forbid RAS (return address * stack) to workaround the Out-of-order Issue in Loongson2F diff --git a/arch/mips/include/asm/uasm.h b/arch/mips/include/asm/uasm.h index 11a8b525254..697e40c0649 100644 --- a/arch/mips/include/asm/uasm.h +++ b/arch/mips/include/asm/uasm.h @@ -167,6 +167,24 @@ static inline void __cpuinit uasm_l##lb(struct uasm_label **lab, u32 *addr) \ #define uasm_i_ssnop(buf) uasm_i_sll(buf, 0, 0, 1) #define uasm_i_ehb(buf) uasm_i_sll(buf, 0, 0, 3) +static inline void uasm_i_dsrl_safe(u32 **p, unsigned int a1, + unsigned int a2, unsigned int a3) +{ + if (a3 < 32) + uasm_i_dsrl(p, a1, a2, a3); + else + uasm_i_dsrl32(p, a1, a2, a3 - 32); +} + +static inline void uasm_i_dsll_safe(u32 **p, unsigned int a1, + unsigned int a2, unsigned int a3) +{ + if (a3 < 32) + uasm_i_dsll(p, a1, a2, a3); + else + uasm_i_dsll32(p, a1, a2, a3 - 32); +} + /* Handle relocations. */ struct uasm_reloc { u32 *addr; diff --git a/arch/mips/jazz/setup.c b/arch/mips/jazz/setup.c index 7043f6b9ff3..0d0f054a02f 100644 --- a/arch/mips/jazz/setup.c +++ b/arch/mips/jazz/setup.c @@ -76,15 +76,9 @@ void __init plat_mem_setup(void) #ifdef CONFIG_VT screen_info = (struct screen_info) { - 0, 0, /* orig-x, orig-y */ - 0, /* unused */ - 0, /* orig_video_page */ - 0, /* orig_video_mode */ - 160, /* orig_video_cols */ - 0, 0, 0, /* unused, ega_bx, unused */ - 64, /* orig_video_lines */ - 0, /* orig_video_isVGA */ - 16 /* orig_video_points */ + .orig_video_cols = 160, + .orig_video_lines = 64, + .orig_video_points = 16, }; #endif diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c index 1a4dd657ccb..d612c6dcb74 100644 --- a/arch/mips/kernel/traps.c +++ b/arch/mips/kernel/traps.c @@ -352,9 +352,10 @@ void show_registers(const struct pt_regs *regs) static DEFINE_SPINLOCK(die_lock); -void __noreturn die(const char * str, const struct pt_regs * regs) +void __noreturn die(const char * str, struct pt_regs * regs) { static int die_counter; + int sig = SIGSEGV; #ifdef CONFIG_MIPS_MT_SMTC unsigned long dvpret = dvpe(); #endif /* CONFIG_MIPS_MT_SMTC */ @@ -365,6 +366,10 @@ void __noreturn die(const char * str, const struct pt_regs * regs) #ifdef CONFIG_MIPS_MT_SMTC mips_mt_regdump(dvpret); #endif /* CONFIG_MIPS_MT_SMTC */ + + if (notify_die(DIE_OOPS, str, regs, 0, current->thread.trap_no, SIGSEGV) == NOTIFY_STOP) + sig = 0; + printk("%s[#%d]:\n", str, ++die_counter); show_registers(regs); add_taint(TAINT_DIE); @@ -379,7 +384,7 @@ void __noreturn die(const char * str, const struct pt_regs * regs) panic("Fatal exception"); } - do_exit(SIGSEGV); + do_exit(sig); } extern struct exception_table_entry __start___dbe_table[]; @@ -1557,12 +1562,7 @@ static char panic_null_cerr[] __cpuinitdata = void __cpuinit set_uncached_handler(unsigned long offset, void *addr, unsigned long size) { -#ifdef CONFIG_32BIT - unsigned long uncached_ebase = KSEG1ADDR(ebase); -#endif -#ifdef CONFIG_64BIT - unsigned long uncached_ebase = TO_UNCAC(ebase); -#endif + unsigned long uncached_ebase = CKSEG1ADDR(ebase); if (!addr) panic(panic_null_cerr); diff --git a/arch/mips/loongson/common/machtype.c b/arch/mips/loongson/common/machtype.c index 853f184b793..81fbe6b73f9 100644 --- a/arch/mips/loongson/common/machtype.c +++ b/arch/mips/loongson/common/machtype.c @@ -24,7 +24,7 @@ static const char *system_types[] = { [MACH_LEMOTE_FL2F] "lemote-fuloong-2f-box", [MACH_LEMOTE_ML2F7] "lemote-mengloong-2f-7inches", [MACH_LEMOTE_YL2F89] "lemote-yeeloong-2f-8.9inches", - [MACH_DEXXON_GDIUM2F10] "dexxon-gidum-2f-10inches", + [MACH_DEXXON_GDIUM2F10] "dexxon-gdium-2f", [MACH_LEMOTE_NAS] "lemote-nas-2f", [MACH_LEMOTE_LL2F] "lemote-lynloong-2f", [MACH_LOONGSON_END] NULL, diff --git a/arch/mips/loongson/common/mem.c b/arch/mips/loongson/common/mem.c index ec2f7964a0b..30eba600120 100644 --- a/arch/mips/loongson/common/mem.c +++ b/arch/mips/loongson/common/mem.c @@ -75,7 +75,7 @@ pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn, unsigned long end = offset + size; if (__uncached_access(file, offset)) { - if (((uca_start && offset) >= uca_start) && + if (uca_start && (offset >= uca_start) && (end <= uca_end)) return __pgprot((pgprot_val(vma_prot) & ~_CACHE_MASK) | @@ -96,7 +96,7 @@ static int __init find_vga_mem_init(void) return 0; for_each_pci_dev(dev) { - if ((dev->class >> 8) == PCI_CLASS_DISPLAY_VGA) { + if ((dev->class >> 16) == PCI_BASE_CLASS_DISPLAY) { for (idx = 0; idx < PCI_NUM_RESOURCES; idx++) { r = &dev->resource[idx]; if (!r->start && r->end) diff --git a/arch/mips/loongson/common/reset.c b/arch/mips/loongson/common/reset.c index 4bd9c18b07a..9e10d6225d9 100644 --- a/arch/mips/loongson/common/reset.c +++ b/arch/mips/loongson/common/reset.c @@ -16,13 +16,31 @@ #include <loongson.h> +static inline void loongson_reboot(void) +{ +#ifndef CONFIG_CPU_JUMP_WORKAROUNDS + ((void (*)(void))ioremap_nocache(LOONGSON_BOOT_BASE, 4)) (); +#else + void (*func)(void); + + func = (void *)ioremap_nocache(LOONGSON_BOOT_BASE, 4); + + __asm__ __volatile__( + " .set noat \n" + " jr %[func] \n" + " .set at \n" + : /* No outputs */ + : [func] "r" (func)); +#endif +} + static void loongson_restart(char *command) { /* do preparation for reboot */ mach_prepare_reboot(); /* reboot via jumping to boot base address */ - ((void (*)(void))ioremap_nocache(LOONGSON_BOOT_BASE, 4)) (); + loongson_reboot(); } static void loongson_poweroff(void) diff --git a/arch/mips/loongson/common/setup.c b/arch/mips/loongson/common/setup.c index 4cd2aa9a342..27d826bc710 100644 --- a/arch/mips/loongson/common/setup.c +++ b/arch/mips/loongson/common/setup.c @@ -41,15 +41,12 @@ void __init plat_mem_setup(void) conswitchp = &vga_con; screen_info = (struct screen_info) { - 0, 25, /* orig-x, orig-y */ - 0, /* unused */ - 0, /* orig-video-page */ - 0, /* orig-video-mode */ - 80, /* orig-video-cols */ - 0, 0, 0, /* ega_ax, ega_bx, ega_cx */ - 25, /* orig-video-lines */ - VIDEO_TYPE_VGAC, /* orig-video-isVGA */ - 16 /* orig-video-points */ + .orig_x = 0, + .orig_y = 25, + .orig_video_cols = 80, + .orig_video_lines = 25, + .orig_video_isVGA = VIDEO_TYPE_VGAC, + .orig_video_points = 16, }; #elif defined(CONFIG_DUMMY_CONSOLE) conswitchp = &dummy_con; diff --git a/arch/mips/loongson/lemote-2f/irq.c b/arch/mips/loongson/lemote-2f/irq.c index 882dfcd42c0..1d8b4d28a05 100644 --- a/arch/mips/loongson/lemote-2f/irq.c +++ b/arch/mips/loongson/lemote-2f/irq.c @@ -79,7 +79,7 @@ void mach_irq_dispatch(unsigned int pending) if (pending & CAUSEF_IP7) do_IRQ(LOONGSON_TIMER_IRQ); else if (pending & CAUSEF_IP6) { /* North Bridge, Perf counter */ -#ifdef CONFIG_OPROFILE +#if defined(CONFIG_OPROFILE) || defined(CONFIG_OPROFILE_MODULE) do_IRQ(LOONGSON2_PERFCNT_IRQ); #endif bonito_irqdispatch(); diff --git a/arch/mips/mm/tlbex.c b/arch/mips/mm/tlbex.c index d1f68aadbc4..86f004dc835 100644 --- a/arch/mips/mm/tlbex.c +++ b/arch/mips/mm/tlbex.c @@ -31,6 +31,16 @@ #include <asm/war.h> #include <asm/uasm.h> +/* + * TLB load/store/modify handlers. + * + * Only the fastpath gets synthesized at runtime, the slowpath for + * do_page_fault remains normal asm. + */ +extern void tlb_do_page_fault_0(void); +extern void tlb_do_page_fault_1(void); + + static inline int r45k_bvahwbug(void) { /* XXX: We should probe for the presence of this bug, but we don't. */ @@ -83,6 +93,7 @@ enum label_id { label_nopage_tlbm, label_smp_pgtable_change, label_r3000_write_probe_fail, + label_large_segbits_fault, #ifdef CONFIG_HUGETLB_PAGE label_tlb_huge_update, #endif @@ -101,6 +112,7 @@ UASM_L_LA(_nopage_tlbs) UASM_L_LA(_nopage_tlbm) UASM_L_LA(_smp_pgtable_change) UASM_L_LA(_r3000_write_probe_fail) +UASM_L_LA(_large_segbits_fault) #ifdef CONFIG_HUGETLB_PAGE UASM_L_LA(_tlb_huge_update) #endif @@ -157,6 +169,10 @@ static u32 tlb_handler[128] __cpuinitdata; static struct uasm_label labels[128] __cpuinitdata; static struct uasm_reloc relocs[128] __cpuinitdata; +#ifdef CONFIG_64BIT +static int check_for_high_segbits __cpuinitdata; +#endif + #ifndef CONFIG_MIPS_PGD_C0_CONTEXT /* * CONFIG_MIPS_PGD_C0_CONTEXT implies 64 bit and lack of pgd_current, @@ -408,7 +424,7 @@ static __cpuinit __maybe_unused void build_convert_pte_to_entrylo(u32 **p, UASM_i_ROTR(p, reg, reg, ilog2(_PAGE_GLOBAL) - ilog2(_PAGE_NO_EXEC)); } else { #ifdef CONFIG_64BIT_PHYS_ADDR - uasm_i_dsrl(p, reg, reg, ilog2(_PAGE_GLOBAL)); + uasm_i_dsrl_safe(p, reg, reg, ilog2(_PAGE_GLOBAL)); #else UASM_i_SRL(p, reg, reg, ilog2(_PAGE_GLOBAL)); #endif @@ -532,7 +548,24 @@ build_get_pmde64(u32 **p, struct uasm_label **l, struct uasm_reloc **r, * The vmalloc handling is not in the hotpath. */ uasm_i_dmfc0(p, tmp, C0_BADVADDR); - uasm_il_bltz(p, r, tmp, label_vmalloc); + + if (check_for_high_segbits) { + /* + * The kernel currently implicitely assumes that the + * MIPS SEGBITS parameter for the processor is + * (PGDIR_SHIFT+PGDIR_BITS) or less, and will never + * allocate virtual addresses outside the maximum + * range for SEGBITS = (PGDIR_SHIFT+PGDIR_BITS). But + * that doesn't prevent user code from accessing the + * higher xuseg addresses. Here, we make sure that + * everything but the lower xuseg addresses goes down + * the module_alloc/vmalloc path. + */ + uasm_i_dsrl_safe(p, ptr, tmp, PGDIR_SHIFT + PGD_ORDER + PAGE_SHIFT - 3); + uasm_il_bnez(p, r, ptr, label_vmalloc); + } else { + uasm_il_bltz(p, r, tmp, label_vmalloc); + } /* No uasm_i_nop needed here, since the next insn doesn't touch TMP. */ #ifdef CONFIG_MIPS_PGD_C0_CONTEXT @@ -549,14 +582,14 @@ build_get_pmde64(u32 **p, struct uasm_label **l, struct uasm_reloc **r, * SMTC uses TCBind value as "CPU" index */ uasm_i_mfc0(p, ptr, C0_TCBIND); - uasm_i_dsrl(p, ptr, ptr, 19); + uasm_i_dsrl_safe(p, ptr, ptr, 19); # else /* * 64 bit SMP running in XKPHYS has smp_processor_id() << 3 * stored in CONTEXT. */ uasm_i_dmfc0(p, ptr, C0_CONTEXT); - uasm_i_dsrl(p, ptr, ptr, 23); + uasm_i_dsrl_safe(p, ptr, ptr, 23); # endif UASM_i_LA_mostly(p, tmp, pgdc); uasm_i_daddu(p, ptr, ptr, tmp); @@ -569,44 +602,78 @@ build_get_pmde64(u32 **p, struct uasm_label **l, struct uasm_reloc **r, uasm_l_vmalloc_done(l, *p); - if (PGDIR_SHIFT - 3 < 32) /* get pgd offset in bytes */ - uasm_i_dsrl(p, tmp, tmp, PGDIR_SHIFT-3); - else - uasm_i_dsrl32(p, tmp, tmp, PGDIR_SHIFT - 3 - 32); + /* get pgd offset in bytes */ + uasm_i_dsrl_safe(p, tmp, tmp, PGDIR_SHIFT - 3); uasm_i_andi(p, tmp, tmp, (PTRS_PER_PGD - 1)<<3); uasm_i_daddu(p, ptr, ptr, tmp); /* add in pgd offset */ #ifndef __PAGETABLE_PMD_FOLDED uasm_i_dmfc0(p, tmp, C0_BADVADDR); /* get faulting address */ uasm_i_ld(p, ptr, 0, ptr); /* get pmd pointer */ - uasm_i_dsrl(p, tmp, tmp, PMD_SHIFT-3); /* get pmd offset in bytes */ + uasm_i_dsrl_safe(p, tmp, tmp, PMD_SHIFT-3); /* get pmd offset in bytes */ uasm_i_andi(p, tmp, tmp, (PTRS_PER_PMD - 1)<<3); uasm_i_daddu(p, ptr, ptr, tmp); /* add in pmd offset */ #endif } +enum vmalloc64_mode {not_refill, refill}; /* * BVADDR is the faulting address, PTR is scratch. * PTR will hold the pgd for vmalloc. */ static void __cpuinit build_get_pgd_vmalloc64(u32 **p, struct uasm_label **l, struct uasm_reloc **r, - unsigned int bvaddr, unsigned int ptr) + unsigned int bvaddr, unsigned int ptr, + enum vmalloc64_mode mode) { long swpd = (long)swapper_pg_dir; + int single_insn_swpd; + int did_vmalloc_branch = 0; + + single_insn_swpd = uasm_in_compat_space_p(swpd) && !uasm_rel_lo(swpd); uasm_l_vmalloc(l, *p); - if (uasm_in_compat_space_p(swpd) && !uasm_rel_lo(swpd)) { - uasm_il_b(p, r, label_vmalloc_done); - uasm_i_lui(p, ptr, uasm_rel_hi(swpd)); - } else { - UASM_i_LA_mostly(p, ptr, swpd); - uasm_il_b(p, r, label_vmalloc_done); - if (uasm_in_compat_space_p(swpd)) - uasm_i_addiu(p, ptr, ptr, uasm_rel_lo(swpd)); - else - uasm_i_daddiu(p, ptr, ptr, uasm_rel_lo(swpd)); + if (mode == refill && check_for_high_segbits) { + if (single_insn_swpd) { + uasm_il_bltz(p, r, bvaddr, label_vmalloc_done); + uasm_i_lui(p, ptr, uasm_rel_hi(swpd)); + did_vmalloc_branch = 1; + /* fall through */ + } else { + uasm_il_bgez(p, r, bvaddr, label_large_segbits_fault); + } + } + if (!did_vmalloc_branch) { + if (uasm_in_compat_space_p(swpd) && !uasm_rel_lo(swpd)) { + uasm_il_b(p, r, label_vmalloc_done); + uasm_i_lui(p, ptr, uasm_rel_hi(swpd)); + } else { + UASM_i_LA_mostly(p, ptr, swpd); + uasm_il_b(p, r, label_vmalloc_done); + if (uasm_in_compat_space_p(swpd)) + uasm_i_addiu(p, ptr, ptr, uasm_rel_lo(swpd)); + else + uasm_i_daddiu(p, ptr, ptr, uasm_rel_lo(swpd)); + } + } + if (mode == refill && check_for_high_segbits) { + uasm_l_large_segbits_fault(l, *p); + /* + * We get here if we are an xsseg address, or if we are + * an xuseg address above (PGDIR_SHIFT+PGDIR_BITS) boundary. + * + * Ignoring xsseg (assume disabled so would generate + * (address errors?), the only remaining possibility + * is the upper xuseg addresses. On processors with + * TLB_SEGBITS <= PGDIR_SHIFT+PGDIR_BITS, these + * addresses would have taken an address error. We try + * to mimic that here by taking a load/istream page + * fault. + */ + UASM_i_LA(p, ptr, (unsigned long)tlb_do_page_fault_0); + uasm_i_jr(p, ptr); + uasm_i_nop(p); } } @@ -720,9 +787,9 @@ static void __cpuinit build_update_entries(u32 **p, unsigned int tmp, UASM_i_MTC0(p, tmp, C0_ENTRYLO0); /* load it */ UASM_i_ROTR(p, ptep, ptep, ilog2(_PAGE_GLOBAL) - ilog2(_PAGE_NO_EXEC)); } else { - uasm_i_dsrl(p, tmp, tmp, ilog2(_PAGE_GLOBAL)); /* convert to entrylo0 */ + uasm_i_dsrl_safe(p, tmp, tmp, ilog2(_PAGE_GLOBAL)); /* convert to entrylo0 */ UASM_i_MTC0(p, tmp, C0_ENTRYLO0); /* load it */ - uasm_i_dsrl(p, ptep, ptep, ilog2(_PAGE_GLOBAL)); /* convert to entrylo1 */ + uasm_i_dsrl_safe(p, ptep, ptep, ilog2(_PAGE_GLOBAL)); /* convert to entrylo1 */ } UASM_i_MTC0(p, ptep, C0_ENTRYLO1); /* load it */ } else { @@ -793,9 +860,9 @@ static void __cpuinit build_r4000_tlb_refill_handler(void) uasm_i_dmfc0(&p, K0, C0_BADVADDR); uasm_i_dmfc0(&p, K1, C0_ENTRYHI); uasm_i_xor(&p, K0, K0, K1); - uasm_i_dsrl32(&p, K1, K0, 62 - 32); - uasm_i_dsrl(&p, K0, K0, 12 + 1); - uasm_i_dsll32(&p, K0, K0, 64 + 12 + 1 - segbits - 32); + uasm_i_dsrl_safe(&p, K1, K0, 62); + uasm_i_dsrl_safe(&p, K0, K0, 12 + 1); + uasm_i_dsll_safe(&p, K0, K0, 64 + 12 + 1 - segbits); uasm_i_or(&p, K0, K0, K1); uasm_il_bnez(&p, &r, K0, label_leave); /* No need for uasm_i_nop */ @@ -825,7 +892,7 @@ static void __cpuinit build_r4000_tlb_refill_handler(void) #endif #ifdef CONFIG_64BIT - build_get_pgd_vmalloc64(&p, &l, &r, K0, K1); + build_get_pgd_vmalloc64(&p, &l, &r, K0, K1, refill); #endif /* @@ -935,15 +1002,6 @@ static void __cpuinit build_r4000_tlb_refill_handler(void) } /* - * TLB load/store/modify handlers. - * - * Only the fastpath gets synthesized at runtime, the slowpath for - * do_page_fault remains normal asm. - */ -extern void tlb_do_page_fault_0(void); -extern void tlb_do_page_fault_1(void); - -/* * 128 instructions for the fastpath handler is generous and should * never be exceeded. */ @@ -1302,7 +1360,7 @@ build_r4000_tlbchange_handler_tail(u32 **p, struct uasm_label **l, uasm_i_eret(p); /* return from trap */ #ifdef CONFIG_64BIT - build_get_pgd_vmalloc64(p, l, r, tmp, ptr); + build_get_pgd_vmalloc64(p, l, r, tmp, ptr, not_refill); #endif } @@ -1322,9 +1380,9 @@ static void __cpuinit build_r4000_tlb_load_handler(void) uasm_i_dmfc0(&p, K0, C0_BADVADDR); uasm_i_dmfc0(&p, K1, C0_ENTRYHI); uasm_i_xor(&p, K0, K0, K1); - uasm_i_dsrl32(&p, K1, K0, 62 - 32); - uasm_i_dsrl(&p, K0, K0, 12 + 1); - uasm_i_dsll32(&p, K0, K0, 64 + 12 + 1 - segbits - 32); + uasm_i_dsrl_safe(&p, K1, K0, 62); + uasm_i_dsrl_safe(&p, K0, K0, 12 + 1); + uasm_i_dsll_safe(&p, K0, K0, 64 + 12 + 1 - segbits); uasm_i_or(&p, K0, K0, K1); uasm_il_bnez(&p, &r, K0, label_leave); /* No need for uasm_i_nop */ @@ -1526,6 +1584,10 @@ void __cpuinit build_tlb_refill_handler(void) */ static int run_once = 0; +#ifdef CONFIG_64BIT + check_for_high_segbits = current_cpu_data.vmbits > (PGDIR_SHIFT + PGD_ORDER + PAGE_SHIFT - 3); +#endif + switch (current_cpu_type()) { case CPU_R2000: case CPU_R3000: diff --git a/arch/mips/nxp/pnx8550/common/reset.c b/arch/mips/nxp/pnx8550/common/reset.c index 76bc3ec634e..fadd8744a6b 100644 --- a/arch/mips/nxp/pnx8550/common/reset.c +++ b/arch/mips/nxp/pnx8550/common/reset.c @@ -20,6 +20,8 @@ * Reset the PNX8550 board. * */ +#include <linux/kernel.h> + #include <asm/reboot.h> #include <glb.h> diff --git a/arch/mips/pci/pci-sb1250.c b/arch/mips/pci/pci-sb1250.c index ada24e6f951..1711e8e101b 100644 --- a/arch/mips/pci/pci-sb1250.c +++ b/arch/mips/pci/pci-sb1250.c @@ -37,6 +37,7 @@ #include <linux/mm.h> #include <linux/console.h> #include <linux/tty.h> +#include <linux/vt.h> #include <asm/io.h> @@ -254,7 +255,7 @@ static int __init sb1250_pcibios_init(void) * XXX ehs: Should this happen in PCI Device mode? */ io_map_base = ioremap(A_PHYS_LDTPCI_IO_MATCH_BYTES, 1024 * 1024); - sb1250_controller.io_map_base = io_map_base; + sb1250_controller.io_map_base = (unsigned long)io_map_base; set_io_port_base((unsigned long)io_map_base); #ifdef CONFIG_SIBYTE_HAS_LDT diff --git a/arch/mips/sgi-ip22/ip22-berr.c b/arch/mips/sgi-ip22/ip22-berr.c index de6a0cc32fe..911d3999c0c 100644 --- a/arch/mips/sgi-ip22/ip22-berr.c +++ b/arch/mips/sgi-ip22/ip22-berr.c @@ -89,7 +89,7 @@ static void print_buserr(void) void ip22_be_interrupt(int irq) { const int field = 2 * sizeof(unsigned long); - const struct pt_regs *regs = get_irq_regs(); + struct pt_regs *regs = get_irq_regs(); save_and_clear_buserr(); print_buserr(); diff --git a/arch/mips/sgi-ip22/ip28-berr.c b/arch/mips/sgi-ip22/ip28-berr.c index 30e12e2ec4b..88c684e05a3 100644 --- a/arch/mips/sgi-ip22/ip28-berr.c +++ b/arch/mips/sgi-ip22/ip28-berr.c @@ -453,7 +453,7 @@ mips_be_fatal: void ip22_be_interrupt(int irq) { - const struct pt_regs *regs = get_irq_regs(); + struct pt_regs *regs = get_irq_regs(); count_be_interrupt++; diff --git a/arch/mips/sibyte/swarm/setup.c b/arch/mips/sibyte/swarm/setup.c index 5277aac96b0..c308989fc46 100644 --- a/arch/mips/sibyte/swarm/setup.c +++ b/arch/mips/sibyte/swarm/setup.c @@ -145,15 +145,14 @@ void __init plat_mem_setup(void) #ifdef CONFIG_VT screen_info = (struct screen_info) { - 0, 0, /* orig-x, orig-y */ - 0, /* unused */ - 52, /* orig_video_page */ - 3, /* orig_video_mode */ - 80, /* orig_video_cols */ - 4626, 3, 9, /* unused, ega_bx, unused */ - 25, /* orig_video_lines */ - 0x22, /* orig_video_isVGA */ - 16 /* orig_video_points */ + .orig_video_page = 52, + .orig_video_mode = 3, + .orig_video_cols = 80, + .flags = 12, + .orig_video_ega_bx = 3, + .orig_video_lines = 25, + .orig_video_isVGA = 0x22, + .orig_video_points = 16, }; /* XXXKW for CFE, get lines/cols from environment */ #endif diff --git a/arch/x86/lib/rwsem_64.S b/arch/x86/lib/rwsem_64.S index 15acecf0d7a..41fcf00e49d 100644 --- a/arch/x86/lib/rwsem_64.S +++ b/arch/x86/lib/rwsem_64.S @@ -60,7 +60,7 @@ ENTRY(call_rwsem_down_write_failed) ENDPROC(call_rwsem_down_write_failed) ENTRY(call_rwsem_wake) - decw %dx /* do nothing if still outstanding active readers */ + decl %edx /* do nothing if still outstanding active readers */ jnz 1f save_common_regs movq %rax,%rdi diff --git a/drivers/char/isicom.c b/drivers/char/isicom.c index 0fa2e4a0835..c1ab303455c 100644 --- a/drivers/char/isicom.c +++ b/drivers/char/isicom.c @@ -879,8 +879,8 @@ static int isicom_open(struct tty_struct *tty, struct file *filp) if (tport == NULL) return -ENODEV; port = container_of(tport, struct isi_port, port); - card = &isi_card[BOARD(tty->index)]; + tty->driver_data = port; return tty_port_open(tport, tty, filp); } @@ -936,7 +936,12 @@ static void isicom_shutdown(struct tty_port *port) static void isicom_close(struct tty_struct *tty, struct file *filp) { struct isi_port *ip = tty->driver_data; - struct tty_port *port = &ip->port; + struct tty_port *port; + + if (ip == NULL) + return; + + port = &ip->port; if (isicom_paranoia_check(ip, tty->name, "isicom_close")) return; tty_port_close(port, tty, filp); diff --git a/drivers/char/istallion.c b/drivers/char/istallion.c index 4cd6c527ee4..4e395c956a0 100644 --- a/drivers/char/istallion.c +++ b/drivers/char/istallion.c @@ -827,6 +827,8 @@ static int stli_open(struct tty_struct *tty, struct file *filp) return -ENODEV; if (portp->devnr < 1) return -ENODEV; + + tty->driver_data = portp; return tty_port_open(&portp->port, tty, filp); } diff --git a/drivers/char/mxser.c b/drivers/char/mxser.c index 47023053ee8..d2692d443f7 100644 --- a/drivers/char/mxser.c +++ b/drivers/char/mxser.c @@ -1011,6 +1011,7 @@ static int mxser_open(struct tty_struct *tty, struct file *filp) if (!info->ioaddr) return -ENODEV; + tty->driver_data = info; return tty_port_open(&info->port, tty, filp); } @@ -1074,7 +1075,7 @@ static void mxser_close(struct tty_struct *tty, struct file *filp) struct mxser_port *info = tty->driver_data; struct tty_port *port = &info->port; - if (tty->index == MXSER_PORTS) + if (tty->index == MXSER_PORTS || info == NULL) return; if (tty_port_close_start(port, tty, filp) == 0) return; diff --git a/drivers/char/riscom8.c b/drivers/char/riscom8.c index 0a8d1e56c99..b02332a5412 100644 --- a/drivers/char/riscom8.c +++ b/drivers/char/riscom8.c @@ -909,6 +909,7 @@ static int rc_open(struct tty_struct *tty, struct file *filp) if (error) return error; + tty->driver_data = port; return tty_port_open(&port->port, tty, filp); } diff --git a/drivers/char/stallion.c b/drivers/char/stallion.c index 0e511d61f54..6049fd73192 100644 --- a/drivers/char/stallion.c +++ b/drivers/char/stallion.c @@ -724,7 +724,6 @@ static int stl_open(struct tty_struct *tty, struct file *filp) { struct stlport *portp; struct stlbrd *brdp; - struct tty_port *port; unsigned int minordev, brdnr, panelnr; int portnr; @@ -754,7 +753,8 @@ static int stl_open(struct tty_struct *tty, struct file *filp) portp = brdp->panels[panelnr]->ports[portnr]; if (portp == NULL) return -ENODEV; - port = &portp->port; + + tty->driver_data = portp; return tty_port_open(&portp->port, tty, filp); } @@ -841,7 +841,8 @@ static void stl_close(struct tty_struct *tty, struct file *filp) pr_debug("stl_close(tty=%p,filp=%p)\n", tty, filp); portp = tty->driver_data; - BUG_ON(portp == NULL); + if(portp == NULL) + return; tty_port_close(&portp->port, tty, filp); } diff --git a/drivers/dma/txx9dmac.c b/drivers/dma/txx9dmac.c index 3ebc61067e5..75fcf1ac8bb 100644 --- a/drivers/dma/txx9dmac.c +++ b/drivers/dma/txx9dmac.c @@ -1359,3 +1359,5 @@ module_exit(txx9dmac_exit); MODULE_LICENSE("GPL"); MODULE_DESCRIPTION("TXx9 DMA Controller driver"); MODULE_AUTHOR("Atsushi Nemoto <anemo@mba.ocn.ne.jp>"); +MODULE_ALIAS("platform:txx9dmac"); +MODULE_ALIAS("platform:txx9dmac-chan"); diff --git a/drivers/edac/edac_mce_amd.c b/drivers/edac/edac_mce_amd.c index f5b6d9fe4de..97e64bcdbc0 100644 --- a/drivers/edac/edac_mce_amd.c +++ b/drivers/edac/edac_mce_amd.c @@ -294,7 +294,6 @@ wrong_ls_mce: void amd_decode_nb_mce(int node_id, struct err_regs *regs, int handle_errors) { u32 ec = ERROR_CODE(regs->nbsl); - u32 xec = EXT_ERROR_CODE(regs->nbsl); if (!handle_errors) return; @@ -324,7 +323,7 @@ void amd_decode_nb_mce(int node_id, struct err_regs *regs, int handle_errors) pr_cont("\n"); } - pr_emerg("%s.\n", EXT_ERR_MSG(xec)); + pr_emerg("%s.\n", EXT_ERR_MSG(regs->nbsl)); if (BUS_ERROR(ec) && nb_bus_decoder) nb_bus_decoder(node_id, regs); @@ -374,7 +373,7 @@ static int amd_decode_mce(struct notifier_block *nb, unsigned long val, ((m->status & MCI_STATUS_PCC) ? "yes" : "no")); /* do the two bits[14:13] together */ - ecc = m->status & (3ULL << 45); + ecc = (m->status >> 45) & 0x3; if (ecc) pr_cont(", %sECC Error", ((ecc == 2) ? "C" : "U")); diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c index 76be229c814..eb0c3fe44b2 100644 --- a/drivers/gpio/gpiolib.c +++ b/drivers/gpio/gpiolib.c @@ -416,7 +416,8 @@ static int gpio_setup_irq(struct gpio_desc *desc, struct device *dev, return 0; free_sd: - sysfs_put(pdesc->value_sd); + if (pdesc) + sysfs_put(pdesc->value_sd); free_id: idr_remove(&pdesc_idr, id); desc->flags &= GPIO_FLAGS_MASK; diff --git a/drivers/i2c/busses/i2c-octeon.c b/drivers/i2c/busses/i2c-octeon.c index a2481f40ea1..0e9f85d0a83 100644 --- a/drivers/i2c/busses/i2c-octeon.c +++ b/drivers/i2c/busses/i2c-octeon.c @@ -447,7 +447,7 @@ static struct i2c_adapter octeon_i2c_ops = { /** * octeon_i2c_setclock - Calculate and set clock divisors. */ -static int __init octeon_i2c_setclock(struct octeon_i2c *i2c) +static int __devinit octeon_i2c_setclock(struct octeon_i2c *i2c) { int tclk, thp_base, inc, thp_idx, mdiv_idx, ndiv_idx, foscl, diff; int thp = 0x18, mdiv = 2, ndiv = 0, delta_hz = 1000000; @@ -490,7 +490,7 @@ static int __init octeon_i2c_setclock(struct octeon_i2c *i2c) return 0; } -static int __init octeon_i2c_initlowlevel(struct octeon_i2c *i2c) +static int __devinit octeon_i2c_initlowlevel(struct octeon_i2c *i2c) { u8 status; int tries; diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c index 3202a86f420..c2258a51fe0 100644 --- a/drivers/i2c/i2c-core.c +++ b/drivers/i2c/i2c-core.c @@ -40,12 +40,11 @@ #include "i2c-core.h" -/* core_lock protects i2c_adapter_idr, userspace_devices, and guarantees +/* core_lock protects i2c_adapter_idr, and guarantees that device detection, deletion of detected devices, and attach_adapter and detach_adapter calls are serialized */ static DEFINE_MUTEX(core_lock); static DEFINE_IDR(i2c_adapter_idr); -static LIST_HEAD(userspace_devices); static struct device_type i2c_client_type; static int i2c_check_addr(struct i2c_adapter *adapter, int addr); @@ -117,8 +116,10 @@ static int i2c_device_probe(struct device *dev) dev_dbg(dev, "probe\n"); status = driver->probe(client, i2c_match_id(driver->id_table, client)); - if (status) + if (status) { client->driver = NULL; + i2c_set_clientdata(client, NULL); + } return status; } @@ -139,8 +140,10 @@ static int i2c_device_remove(struct device *dev) dev->driver = NULL; status = 0; } - if (status == 0) + if (status == 0) { client->driver = NULL; + i2c_set_clientdata(client, NULL); + } return status; } @@ -538,9 +541,9 @@ i2c_sysfs_new_device(struct device *dev, struct device_attribute *attr, return -EEXIST; /* Keep track of the added device */ - mutex_lock(&core_lock); - list_add_tail(&client->detected, &userspace_devices); - mutex_unlock(&core_lock); + i2c_lock_adapter(adap); + list_add_tail(&client->detected, &adap->userspace_clients); + i2c_unlock_adapter(adap); dev_info(dev, "%s: Instantiated device %s at 0x%02hx\n", "new_device", info.type, info.addr); @@ -579,9 +582,10 @@ i2c_sysfs_delete_device(struct device *dev, struct device_attribute *attr, /* Make sure the device was added through sysfs */ res = -ENOENT; - mutex_lock(&core_lock); - list_for_each_entry_safe(client, next, &userspace_devices, detected) { - if (client->addr == addr && client->adapter == adap) { + i2c_lock_adapter(adap); + list_for_each_entry_safe(client, next, &adap->userspace_clients, + detected) { + if (client->addr == addr) { dev_info(dev, "%s: Deleting device %s at 0x%02hx\n", "delete_device", client->name, client->addr); @@ -591,7 +595,7 @@ i2c_sysfs_delete_device(struct device *dev, struct device_attribute *attr, break; } } - mutex_unlock(&core_lock); + i2c_unlock_adapter(adap); if (res < 0) dev_err(dev, "%s: Can't find device in list\n", @@ -673,6 +677,7 @@ static int i2c_register_adapter(struct i2c_adapter *adap) } rt_mutex_init(&adap->bus_lock); + INIT_LIST_HEAD(&adap->userspace_clients); /* Set default timeout to 1 second if not already set */ if (adap->timeout == 0) @@ -875,14 +880,15 @@ int i2c_del_adapter(struct i2c_adapter *adap) return res; /* Remove devices instantiated from sysfs */ - list_for_each_entry_safe(client, next, &userspace_devices, detected) { - if (client->adapter == adap) { - dev_dbg(&adap->dev, "Removing %s at 0x%x\n", - client->name, client->addr); - list_del(&client->detected); - i2c_unregister_device(client); - } + i2c_lock_adapter(adap); + list_for_each_entry_safe(client, next, &adap->userspace_clients, + detected) { + dev_dbg(&adap->dev, "Removing %s at 0x%x\n", client->name, + client->addr); + list_del(&client->detected); + i2c_unregister_device(client); } + i2c_unlock_adapter(adap); /* Detach any active clients. This can't fail, thus we do not checking the returned value. */ @@ -1260,12 +1266,23 @@ static int i2c_detect_address(struct i2c_client *temp_client, return 0; /* Make sure there is something at this address */ - if (i2c_smbus_xfer(adapter, addr, 0, 0, 0, I2C_SMBUS_QUICK, NULL) < 0) - return 0; + if (addr == 0x73 && (adapter->class & I2C_CLASS_HWMON)) { + /* Special probe for FSC hwmon chips */ + union i2c_smbus_data dummy; - /* Prevent 24RF08 corruption */ - if ((addr & ~0x0f) == 0x50) - i2c_smbus_xfer(adapter, addr, 0, 0, 0, I2C_SMBUS_QUICK, NULL); + if (i2c_smbus_xfer(adapter, addr, 0, I2C_SMBUS_READ, 0, + I2C_SMBUS_BYTE_DATA, &dummy) < 0) + return 0; + } else { + if (i2c_smbus_xfer(adapter, addr, 0, I2C_SMBUS_WRITE, 0, + I2C_SMBUS_QUICK, NULL) < 0) + return 0; + + /* Prevent 24RF08 corruption */ + if ((addr & ~0x0f) == 0x50) + i2c_smbus_xfer(adapter, addr, 0, I2C_SMBUS_WRITE, 0, + I2C_SMBUS_QUICK, NULL); + } /* Finally call the custom detection function */ memset(&info, 0, sizeof(struct i2c_board_info)); diff --git a/drivers/net/phy/mdio-octeon.c b/drivers/net/phy/mdio-octeon.c index a872aea4ed7..f443d43edd8 100644 --- a/drivers/net/phy/mdio-octeon.c +++ b/drivers/net/phy/mdio-octeon.c @@ -88,6 +88,7 @@ static int octeon_mdiobus_write(struct mii_bus *bus, int phy_id, static int __init octeon_mdiobus_probe(struct platform_device *pdev) { struct octeon_mdiobus *bus; + union cvmx_smix_en smi_en; int i; int err = -ENOENT; @@ -103,6 +104,10 @@ static int __init octeon_mdiobus_probe(struct platform_device *pdev) if (!bus->mii_bus) goto err; + smi_en.u64 = 0; + smi_en.s.en = 1; + cvmx_write_csr(CVMX_SMIX_EN(bus->unit), smi_en.u64); + /* * Standard Octeon evaluation boards don't support phy * interrupts, we need to poll. @@ -133,17 +138,22 @@ err_register: err: devm_kfree(&pdev->dev, bus); + smi_en.u64 = 0; + cvmx_write_csr(CVMX_SMIX_EN(bus->unit), smi_en.u64); return err; } static int __exit octeon_mdiobus_remove(struct platform_device *pdev) { struct octeon_mdiobus *bus; + union cvmx_smix_en smi_en; bus = dev_get_drvdata(&pdev->dev); mdiobus_unregister(bus->mii_bus); mdiobus_free(bus->mii_bus); + smi_en.u64 = 0; + cvmx_write_csr(CVMX_SMIX_EN(bus->unit), smi_en.u64); return 0; } diff --git a/drivers/of/of_mdio.c b/drivers/of/of_mdio.c index 18ecae4a437..b4748337223 100644 --- a/drivers/of/of_mdio.c +++ b/drivers/of/of_mdio.c @@ -69,7 +69,7 @@ int of_mdiobus_register(struct mii_bus *mdio, struct device_node *np) } phy = get_phy_device(mdio, be32_to_cpup(addr)); - if (!phy) { + if (!phy || IS_ERR(phy)) { dev_err(&mdio->dev, "error probing PHY at address %i\n", *addr); continue; diff --git a/drivers/pcmcia/db1xxx_ss.c b/drivers/pcmcia/db1xxx_ss.c index 2d48196a48c..0f4cc3f0002 100644 --- a/drivers/pcmcia/db1xxx_ss.c +++ b/drivers/pcmcia/db1xxx_ss.c @@ -146,7 +146,6 @@ static irqreturn_t db1200_pcmcia_cdirq(int irq, void *data) static int db1x_pcmcia_setup_irqs(struct db1x_pcmcia_sock *sock) { int ret; - unsigned long flags; if (sock->stschg_irq != -1) { ret = request_irq(sock->stschg_irq, db1000_pcmcia_stschgirq, @@ -162,30 +161,23 @@ static int db1x_pcmcia_setup_irqs(struct db1x_pcmcia_sock *sock) * active one disabled. */ if (sock->board_type == BOARD_TYPE_DB1200) { - local_irq_save(flags); - ret = request_irq(sock->insert_irq, db1200_pcmcia_cdirq, IRQF_DISABLED, "pcmcia_insert", sock); - if (ret) { - local_irq_restore(flags); + if (ret) goto out1; - } ret = request_irq(sock->eject_irq, db1200_pcmcia_cdirq, IRQF_DISABLED, "pcmcia_eject", sock); if (ret) { free_irq(sock->insert_irq, sock); - local_irq_restore(flags); goto out1; } - /* disable the currently active one */ + /* enable the currently silent one */ if (db1200_card_inserted(sock)) - disable_irq_nosync(sock->insert_irq); + enable_irq(sock->eject_irq); else - disable_irq_nosync(sock->eject_irq); - - local_irq_restore(flags); + enable_irq(sock->insert_irq); } else { /* all other (older) Db1x00 boards use a GPIO to show * card detection status: use both-edge triggers. diff --git a/drivers/serial/8250_pnp.c b/drivers/serial/8250_pnp.c index 24485cc62ff..4822cb50cd0 100644 --- a/drivers/serial/8250_pnp.c +++ b/drivers/serial/8250_pnp.c @@ -348,6 +348,8 @@ static const struct pnp_device_id pnp_dev_table[] = { { "FUJ02E6", 0 }, /* Fujitsu Wacom 2FGT Tablet PC device */ { "FUJ02E7", 0 }, + /* Fujitsu Wacom 1FGT Tablet PC device */ + { "FUJ02E9", 0 }, /* * LG C1 EXPRESS DUAL (C1-PB11A3) touch screen (actually a FUJ02E6 in * disguise) diff --git a/drivers/serial/mpc52xx_uart.c b/drivers/serial/mpc52xx_uart.c index 3119fddaedb..a176ab4bd65 100644 --- a/drivers/serial/mpc52xx_uart.c +++ b/drivers/serial/mpc52xx_uart.c @@ -29,39 +29,6 @@ * kind, whether express or implied. */ -/* Platform device Usage : - * - * Since PSCs can have multiple function, the correct driver for each one - * is selected by calling mpc52xx_match_psc_function(...). The function - * handled by this driver is "uart". - * - * The driver init all necessary registers to place the PSC in uart mode without - * DCD. However, the pin multiplexing aren't changed and should be set either - * by the bootloader or in the platform init code. - * - * The idx field must be equal to the PSC index (e.g. 0 for PSC1, 1 for PSC2, - * and so on). So the PSC1 is mapped to /dev/ttyPSC0, PSC2 to /dev/ttyPSC1 and - * so on. But be warned, it's an ABSOLUTE REQUIREMENT ! This is needed mainly - * fpr the console code : without this 1:1 mapping, at early boot time, when we - * are parsing the kernel args console=ttyPSC?, we wouldn't know which PSC it - * will be mapped to. - */ - -/* OF Platform device Usage : - * - * This driver is only used for PSCs configured in uart mode. The device - * tree will have a node for each PSC with "mpc52xx-psc-uart" in the compatible - * list. - * - * By default, PSC devices are enumerated in the order they are found. However - * a particular PSC number can be forces by adding 'device_no = <port#>' - * to the device node. - * - * The driver init all necessary registers to place the PSC in uart mode without - * DCD. However, the pin multiplexing aren't changed and should be set either - * by the bootloader or in the platform init code. - */ - #undef DEBUG #include <linux/device.h> diff --git a/drivers/serial/pmac_zilog.c b/drivers/serial/pmac_zilog.c index 4eaa043ca2a..700e10833bf 100644 --- a/drivers/serial/pmac_zilog.c +++ b/drivers/serial/pmac_zilog.c @@ -752,8 +752,10 @@ static void pmz_break_ctl(struct uart_port *port, int break_state) uap->curregs[R5] = new_reg; /* NOTE: Not subject to 'transmitter active' rule. */ - if (ZS_IS_ASLEEP(uap)) + if (ZS_IS_ASLEEP(uap)) { + spin_unlock_irqrestore(&port->lock, flags); return; + } write_zsreg(uap, R5, uap->curregs[R5]); } diff --git a/drivers/spi/omap2_mcspi.c b/drivers/spi/omap2_mcspi.c index d8356af118a..e0de0d0eede 100644 --- a/drivers/spi/omap2_mcspi.c +++ b/drivers/spi/omap2_mcspi.c @@ -204,6 +204,7 @@ static inline void mcspi_write_chconf0(const struct spi_device *spi, u32 val) cs->chconf0 = val; mcspi_write_cs_reg(spi, OMAP2_MCSPI_CHCONF0, val); + mcspi_read_cs_reg(spi, OMAP2_MCSPI_CHCONF0); } static void omap2_mcspi_set_dma_req(const struct spi_device *spi, @@ -532,7 +533,7 @@ omap2_mcspi_txrx_pio(struct spi_device *spi, struct spi_transfer *xfer) goto out; } #ifdef VERBOSE - dev_dbg(&spi->dev, "write-%d %04x\n", + dev_dbg(&spi->dev, "write-%d %08x\n", word_len, *tx); #endif __raw_writel(*tx++, tx_reg); @@ -550,7 +551,7 @@ omap2_mcspi_txrx_pio(struct spi_device *spi, struct spi_transfer *xfer) mcspi_write_chconf0(spi, l); *rx++ = __raw_readl(rx_reg); #ifdef VERBOSE - dev_dbg(&spi->dev, "read-%d %04x\n", + dev_dbg(&spi->dev, "read-%d %08x\n", word_len, *(rx - 1)); #endif } diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c index 9ffb0fdbd6f..b3a1f9259b6 100644 --- a/drivers/spi/spi.c +++ b/drivers/spi/spi.c @@ -41,7 +41,7 @@ static void spidev_release(struct device *dev) spi->master->cleanup(spi); spi_master_put(spi->master); - kfree(dev); + kfree(spi); } static ssize_t @@ -257,6 +257,7 @@ int spi_add_device(struct spi_device *spi) { static DEFINE_MUTEX(spi_add_lock); struct device *dev = spi->master->dev.parent; + struct device *d; int status; /* Chipselects are numbered 0..max; validate. */ @@ -278,10 +279,11 @@ int spi_add_device(struct spi_device *spi) */ mutex_lock(&spi_add_lock); - if (bus_find_device_by_name(&spi_bus_type, NULL, dev_name(&spi->dev)) - != NULL) { + d = bus_find_device_by_name(&spi_bus_type, NULL, dev_name(&spi->dev)); + if (d != NULL) { dev_err(dev, "chipselect %d already in use\n", spi->chip_select); + put_device(d); status = -EBUSY; goto done; } diff --git a/drivers/staging/dt3155/dt3155_drv.c b/drivers/staging/dt3155/dt3155_drv.c index e2c44ec6fc4..7ac2c6d8e9a 100644 --- a/drivers/staging/dt3155/dt3155_drv.c +++ b/drivers/staging/dt3155/dt3155_drv.c @@ -464,9 +464,9 @@ static void dt3155_init_isr(int minor) /* 50/60 Hz should be set before this point but let's make sure it is */ /* right anyway */ - ReadI2C(dt3155_lbase[ minor ], CONFIG, &i2c_csr2.reg); + ReadI2C(dt3155_lbase[ minor ], CSR2, &i2c_csr2.reg); i2c_csr2.fld.HZ50 = FORMAT50HZ; - WriteI2C(dt3155_lbase[ minor ], CONFIG, i2c_config.reg); + WriteI2C(dt3155_lbase[ minor ], CSR2, i2c_csr2.reg); /* enable busmaster chip, clear flags */ diff --git a/drivers/staging/hv/Hv.c b/drivers/staging/hv/Hv.c index 5d53889fb4a..3a1112d29ae 100644 --- a/drivers/staging/hv/Hv.c +++ b/drivers/staging/hv/Hv.c @@ -306,9 +306,9 @@ void HvCleanup(void) DPRINT_ENTER(VMBUS); if (gHvContext.SignalEventBuffer) { + kfree(gHvContext.SignalEventBuffer); gHvContext.SignalEventBuffer = NULL; gHvContext.SignalEventParam = NULL; - kfree(gHvContext.SignalEventBuffer); } if (gHvContext.HypercallPage) { diff --git a/drivers/staging/hv/RndisFilter.c b/drivers/staging/hv/RndisFilter.c index cd2930de217..6704f64c93f 100644 --- a/drivers/staging/hv/RndisFilter.c +++ b/drivers/staging/hv/RndisFilter.c @@ -751,6 +751,7 @@ static int RndisFilterOpenDevice(struct rndis_device *Device) ret = RndisFilterSetPacketFilter(Device, NDIS_PACKET_TYPE_BROADCAST | + NDIS_PACKET_TYPE_ALL_MULTICAST | NDIS_PACKET_TYPE_DIRECTED); if (ret == 0) Device->State = RNDIS_DEV_DATAINITIALIZED; diff --git a/drivers/staging/hv/netvsc_drv.c b/drivers/staging/hv/netvsc_drv.c index 2ccb6b93fe4..ab27d9a4446 100644 --- a/drivers/staging/hv/netvsc_drv.c +++ b/drivers/staging/hv/netvsc_drv.c @@ -403,8 +403,7 @@ static int netvsc_probe(struct device *device) if (!net_drv_obj->Base.OnDeviceAdd) return -1; - net = alloc_netdev(sizeof(struct net_device_context), "seth%d", - ether_setup); + net = alloc_etherdev(sizeof(struct net_device_context)); if (!net) return -1; diff --git a/drivers/staging/iio/accel/lis3l02dq_core.c b/drivers/staging/iio/accel/lis3l02dq_core.c index ea76902797b..82e43588e8a 100644 --- a/drivers/staging/iio/accel/lis3l02dq_core.c +++ b/drivers/staging/iio/accel/lis3l02dq_core.c @@ -618,7 +618,7 @@ static int lis3l02dq_thresh_handler_th(struct iio_dev *dev_info, static void lis3l02dq_thresh_handler_bh_no_check(struct work_struct *work_s) { struct iio_work_cont *wc - = container_of(work_s, struct iio_work_cont, ws_nocheck); + = container_of(work_s, struct iio_work_cont, ws); struct lis3l02dq_state *st = wc->st; u8 t; diff --git a/drivers/staging/iio/accel/lis3l02dq_ring.c b/drivers/staging/iio/accel/lis3l02dq_ring.c index 93712430e57..a4d97ea0df3 100644 --- a/drivers/staging/iio/accel/lis3l02dq_ring.c +++ b/drivers/staging/iio/accel/lis3l02dq_ring.c @@ -493,6 +493,9 @@ int lis3l02dq_probe_trigger(struct iio_dev *indio_dev) struct lis3l02dq_state *state = indio_dev->dev_data; state->trig = iio_allocate_trigger(); + if (!state->trig) + return -ENOMEM; + state->trig->name = kmalloc(IIO_TRIGGER_NAME_LENGTH, GFP_KERNEL); if (!state->trig->name) { ret = -ENOMEM; diff --git a/drivers/staging/iio/adc/max1363_core.c b/drivers/staging/iio/adc/max1363_core.c index 790d1cc9cdc..773f1d1d9c6 100644 --- a/drivers/staging/iio/adc/max1363_core.c +++ b/drivers/staging/iio/adc/max1363_core.c @@ -557,6 +557,7 @@ error_put_reg: if (!IS_ERR(st->reg)) regulator_put(st->reg); error_free_st: + i2c_set_clientdata(client, NULL); kfree(st); error_ret: @@ -574,6 +575,7 @@ static int max1363_remove(struct i2c_client *client) regulator_disable(st->reg); regulator_put(st->reg); } + i2c_set_clientdata(client, NULL); kfree(st); return 0; diff --git a/drivers/staging/iio/industrialio-core.c b/drivers/staging/iio/industrialio-core.c index 37f58f66e49..1d77082c853 100644 --- a/drivers/staging/iio/industrialio-core.c +++ b/drivers/staging/iio/industrialio-core.c @@ -537,6 +537,7 @@ static void iio_device_unregister_sysfs(struct iio_dev *dev_info) sysfs_remove_group(&dev_info->dev.kobj, dev_info->attrs); } +/* Return a negative errno on failure */ int iio_get_new_idr_val(struct idr *this_idr) { int ret; @@ -660,7 +661,7 @@ static int iio_device_register_eventset(struct iio_dev *dev_info) for (i = 0; i < dev_info->num_interrupt_lines; i++) { dev_info->event_interfaces[i].owner = dev_info->driver_module; ret = iio_get_new_idr_val(&iio_event_idr); - if (ret) + if (ret < 0) goto error_free_setup_ev_ints; else dev_info->event_interfaces[i].id = ret; diff --git a/drivers/staging/iio/light/tsl2563.c b/drivers/staging/iio/light/tsl2563.c index 1ba4aa392f6..8770a00e365 100644 --- a/drivers/staging/iio/light/tsl2563.c +++ b/drivers/staging/iio/light/tsl2563.c @@ -682,6 +682,7 @@ static int __devinit tsl2563_probe(struct i2c_client *client, fail2: iio_device_unregister(chip->indio_dev); fail1: + i2c_set_clientdata(client, NULL); kfree(chip); return err; } @@ -692,6 +693,7 @@ static int tsl2563_remove(struct i2c_client *client) iio_device_unregister(chip->indio_dev); + i2c_set_clientdata(client, NULL); kfree(chip); return 0; } diff --git a/drivers/staging/iio/ring_sw.c b/drivers/staging/iio/ring_sw.c index b104c3d9c35..cf22c091668 100644 --- a/drivers/staging/iio/ring_sw.c +++ b/drivers/staging/iio/ring_sw.c @@ -293,7 +293,7 @@ again: return -EAGAIN; memcpy(data, last_written_p_copy, ring->buf.bpd); - if (unlikely(ring->last_written_p >= last_written_p_copy)) + if (unlikely(ring->last_written_p != last_written_p_copy)) goto again; iio_unmark_sw_rb_in_use(&ring->buf); diff --git a/drivers/staging/octeon/cvmx-helper-board.c b/drivers/staging/octeon/cvmx-helper-board.c index 3085e38a6f9..00a555b8335 100644 --- a/drivers/staging/octeon/cvmx-helper-board.c +++ b/drivers/staging/octeon/cvmx-helper-board.c @@ -153,6 +153,14 @@ int cvmx_helper_board_get_mii_address(int ipd_port) * through switch. */ return -1; + + case CVMX_BOARD_TYPE_CUST_WSX16: + if (ipd_port >= 0 && ipd_port <= 3) + return ipd_port; + else if (ipd_port >= 16 && ipd_port <= 19) + return ipd_port - 16 + 4; + else + return -1; } /* Some unknown board. Somebody forgot to update this function... */ diff --git a/drivers/staging/rt2860/usb_main_dev.c b/drivers/staging/rt2860/usb_main_dev.c index 1873a79bb03..740db0c1ac0 100644 --- a/drivers/staging/rt2860/usb_main_dev.c +++ b/drivers/staging/rt2860/usb_main_dev.c @@ -63,6 +63,7 @@ struct usb_device_id rtusb_usb_id[] = { {USB_DEVICE(0x07D1, 0x3C11)}, /* D-Link */ {USB_DEVICE(0x14B2, 0x3C07)}, /* AL */ {USB_DEVICE(0x050D, 0x8053)}, /* Belkin */ + {USB_DEVICE(0x050D, 0x825B)}, /* Belkin */ {USB_DEVICE(0x14B2, 0x3C23)}, /* Airlink */ {USB_DEVICE(0x14B2, 0x3C27)}, /* Airlink */ {USB_DEVICE(0x07AA, 0x002F)}, /* Corega */ diff --git a/drivers/staging/rtl8192su/r8192U_core.c b/drivers/staging/rtl8192su/r8192U_core.c index e16256fe595..04d9b85f3d4 100644 --- a/drivers/staging/rtl8192su/r8192U_core.c +++ b/drivers/staging/rtl8192su/r8192U_core.c @@ -113,14 +113,17 @@ u32 rt_global_debug_component = \ static const struct usb_device_id rtl8192_usb_id_tbl[] = { /* Realtek */ + {USB_DEVICE(0x0bda, 0x8171)}, {USB_DEVICE(0x0bda, 0x8192)}, {USB_DEVICE(0x0bda, 0x8709)}, /* Corega */ {USB_DEVICE(0x07aa, 0x0043)}, /* Belkin */ {USB_DEVICE(0x050d, 0x805E)}, + {USB_DEVICE(0x050d, 0x815F)}, /* Belkin F5D8053 v6 */ /* Sitecom */ {USB_DEVICE(0x0df6, 0x0031)}, + {USB_DEVICE(0x0df6, 0x004b)}, /* WL-349 */ /* EnGenius */ {USB_DEVICE(0x1740, 0x9201)}, /* Dlink */ diff --git a/drivers/staging/usbip/usbip_event.c b/drivers/staging/usbip/usbip_event.c index 6da1021e8a6..a2566f1075d 100644 --- a/drivers/staging/usbip/usbip_event.c +++ b/drivers/staging/usbip/usbip_event.c @@ -117,6 +117,9 @@ void usbip_stop_eh(struct usbip_device *ud) { struct usbip_task *eh = &ud->eh; + if (eh->thread == current) + return; /* do not wait for myself */ + wait_for_completion(&eh->thread_done); usbip_dbg_eh("usbip_eh has finished\n"); } diff --git a/drivers/staging/vme/bridges/vme_tsi148.c b/drivers/staging/vme/bridges/vme_tsi148.c index 68f24425977..783051f59f1 100644 --- a/drivers/staging/vme/bridges/vme_tsi148.c +++ b/drivers/staging/vme/bridges/vme_tsi148.c @@ -2455,9 +2455,10 @@ static int tsi148_probe(struct pci_dev *pdev, const struct pci_device_id *id) dev_info(&pdev->dev, "VME Write and flush and error check is %s\n", err_chk ? "enabled" : "disabled"); - if (tsi148_crcsr_init(tsi148_bridge, pdev)) + if (tsi148_crcsr_init(tsi148_bridge, pdev)) { dev_err(&pdev->dev, "CR/CSR configuration failed.\n"); goto err_crcsr; + } retval = vme_register_bridge(tsi148_bridge); if (retval != 0) { diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index be6331e2c27..5e1a253b08a 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -1542,6 +1542,9 @@ static const struct usb_device_id acm_ids[] = { { USB_DEVICE(0x1bbb, 0x0003), /* Alcatel OT-I650 */ .driver_info = NO_UNION_NORMAL, /* reports zero length descriptor */ }, + { USB_DEVICE(0x1576, 0x03b1), /* Maretron USB100 */ + .driver_info = NO_UNION_NORMAL, /* reports zero length descriptor */ + }, /* Nokia S60 phones expose two ACM channels. The first is * a modem and is picked up by the standard AT-command diff --git a/drivers/usb/core/Kconfig b/drivers/usb/core/Kconfig index 97a819c23ef..7e594449600 100644 --- a/drivers/usb/core/Kconfig +++ b/drivers/usb/core/Kconfig @@ -109,7 +109,7 @@ config USB_SUSPEND config USB_OTG bool depends on USB && EXPERIMENTAL - select USB_SUSPEND + depends on USB_SUSPEND default n diff --git a/drivers/usb/core/generic.c b/drivers/usb/core/generic.c index bdf87a8414a..2c95153c0f2 100644 --- a/drivers/usb/core/generic.c +++ b/drivers/usb/core/generic.c @@ -120,7 +120,7 @@ int usb_choose_configuration(struct usb_device *udev) * than a vendor-specific driver. */ else if (udev->descriptor.bDeviceClass != USB_CLASS_VENDOR_SPEC && - (!desc || desc->bInterfaceClass != + (desc && desc->bInterfaceClass != USB_CLASS_VENDOR_SPEC)) { best = c; break; diff --git a/drivers/usb/core/inode.c b/drivers/usb/core/inode.c index 97b40ce133f..4a6366a4212 100644 --- a/drivers/usb/core/inode.c +++ b/drivers/usb/core/inode.c @@ -515,13 +515,13 @@ static int fs_create_by_name (const char *name, mode_t mode, *dentry = NULL; mutex_lock(&parent->d_inode->i_mutex); *dentry = lookup_one_len(name, parent, strlen(name)); - if (!IS_ERR(dentry)) { + if (!IS_ERR(*dentry)) { if ((mode & S_IFMT) == S_IFDIR) error = usbfs_mkdir (parent->d_inode, *dentry, mode); else error = usbfs_create (parent->d_inode, *dentry, mode); } else - error = PTR_ERR(dentry); + error = PTR_ERR(*dentry); mutex_unlock(&parent->d_inode->i_mutex); return error; diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c index 1297e9b16a5..0561430f2ed 100644 --- a/drivers/usb/core/usb.c +++ b/drivers/usb/core/usb.c @@ -718,7 +718,7 @@ int __usb_get_extra_descriptor(char *buffer, unsigned size, EXPORT_SYMBOL_GPL(__usb_get_extra_descriptor); /** - * usb_buffer_alloc - allocate dma-consistent buffer for URB_NO_xxx_DMA_MAP + * usb_alloc_coherent - allocate dma-consistent buffer for URB_NO_xxx_DMA_MAP * @dev: device the buffer will be used with * @size: requested buffer size * @mem_flags: affect whether allocation may block @@ -737,30 +737,30 @@ EXPORT_SYMBOL_GPL(__usb_get_extra_descriptor); * architectures where CPU caches are not DMA-coherent. On systems without * bus-snooping caches, these buffers are uncached. * - * When the buffer is no longer used, free it with usb_buffer_free(). + * When the buffer is no longer used, free it with usb_free_coherent(). */ -void *usb_buffer_alloc(struct usb_device *dev, size_t size, gfp_t mem_flags, - dma_addr_t *dma) +void *usb_alloc_coherent(struct usb_device *dev, size_t size, gfp_t mem_flags, + dma_addr_t *dma) { if (!dev || !dev->bus) return NULL; return hcd_buffer_alloc(dev->bus, size, mem_flags, dma); } -EXPORT_SYMBOL_GPL(usb_buffer_alloc); +EXPORT_SYMBOL_GPL(usb_alloc_coherent); /** - * usb_buffer_free - free memory allocated with usb_buffer_alloc() + * usb_free_coherent - free memory allocated with usb_alloc_coherent() * @dev: device the buffer was used with * @size: requested buffer size * @addr: CPU address of buffer * @dma: DMA address of buffer * * This reclaims an I/O buffer, letting it be reused. The memory must have - * been allocated using usb_buffer_alloc(), and the parameters must match + * been allocated using usb_alloc_coherent(), and the parameters must match * those provided in that allocation request. */ -void usb_buffer_free(struct usb_device *dev, size_t size, void *addr, - dma_addr_t dma) +void usb_free_coherent(struct usb_device *dev, size_t size, void *addr, + dma_addr_t dma) { if (!dev || !dev->bus) return; @@ -768,7 +768,7 @@ void usb_buffer_free(struct usb_device *dev, size_t size, void *addr, return; hcd_buffer_free(dev->bus, size, addr, dma); } -EXPORT_SYMBOL_GPL(usb_buffer_free); +EXPORT_SYMBOL_GPL(usb_free_coherent); /** * usb_buffer_map - create DMA mapping(s) for an urb diff --git a/drivers/usb/gadget/s3c-hsotg.c b/drivers/usb/gadget/s3c-hsotg.c index 124a8ccfdcd..1f73b485732 100644 --- a/drivers/usb/gadget/s3c-hsotg.c +++ b/drivers/usb/gadget/s3c-hsotg.c @@ -2145,6 +2145,7 @@ static int s3c_hsotg_ep_enable(struct usb_ep *ep, u32 epctrl; u32 mps; int dir_in; + int ret = 0; dev_dbg(hsotg->dev, "%s: ep %s: a 0x%02x, attr 0x%02x, mps 0x%04x, intr %d\n", @@ -2196,7 +2197,8 @@ static int s3c_hsotg_ep_enable(struct usb_ep *ep, switch (desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) { case USB_ENDPOINT_XFER_ISOC: dev_err(hsotg->dev, "no current ISOC support\n"); - return -EINVAL; + ret = -EINVAL; + goto out; case USB_ENDPOINT_XFER_BULK: epctrl |= S3C_DxEPCTL_EPType_Bulk; @@ -2235,8 +2237,9 @@ static int s3c_hsotg_ep_enable(struct usb_ep *ep, /* enable the endpoint interrupt */ s3c_hsotg_ctrl_epint(hsotg, index, dir_in, 1); +out: spin_unlock_irqrestore(&hs_ep->lock, flags); - return 0; + return ret; } static int s3c_hsotg_ep_disable(struct usb_ep *ep) diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c index 68b83ab7071..944291e10f9 100644 --- a/drivers/usb/host/ohci-at91.c +++ b/drivers/usb/host/ohci-at91.c @@ -331,6 +331,8 @@ ohci_hcd_at91_drv_suspend(struct platform_device *pdev, pm_message_t mesg) */ if (at91_suspend_entering_slow_clock()) { ohci_usb_reset (ohci); + /* flush the writes */ + (void) ohci_readl (ohci, &ohci->regs->control); at91_stop_clock(); } diff --git a/drivers/usb/host/ohci-hub.c b/drivers/usb/host/ohci-hub.c index 32bbce9718f..65cac8cc892 100644 --- a/drivers/usb/host/ohci-hub.c +++ b/drivers/usb/host/ohci-hub.c @@ -697,7 +697,7 @@ static int ohci_hub_control ( u16 wLength ) { struct ohci_hcd *ohci = hcd_to_ohci (hcd); - int ports = hcd_to_bus (hcd)->root_hub->maxchild; + int ports = ohci->num_ports; u32 temp; int retval = 0; diff --git a/drivers/usb/host/oxu210hp-hcd.c b/drivers/usb/host/oxu210hp-hcd.c index 50f57f46883..e62b30b3e42 100644 --- a/drivers/usb/host/oxu210hp-hcd.c +++ b/drivers/usb/host/oxu210hp-hcd.c @@ -660,13 +660,13 @@ static struct ehci_qh *oxu_qh_alloc(struct oxu_hcd *oxu) if (qh->dummy == NULL) { oxu_dbg(oxu, "no dummy td\n"); oxu->qh_used[i] = 0; - - return NULL; + qh = NULL; + goto unlock; } oxu->qh_used[i] = 1; } - +unlock: spin_unlock(&oxu->mem_lock); return qh; diff --git a/drivers/usb/host/sl811-hcd.c b/drivers/usb/host/sl811-hcd.c index e11cc3aa4b8..3b867a8af7b 100644 --- a/drivers/usb/host/sl811-hcd.c +++ b/drivers/usb/host/sl811-hcd.c @@ -720,10 +720,10 @@ retry: /* port status seems weird until after reset, so * force the reset and make khubd clean up later. */ - if (sl811->stat_insrmv & 1) - sl811->port1 |= 1 << USB_PORT_FEAT_CONNECTION; - else + if (irqstat & SL11H_INTMASK_RD) sl811->port1 &= ~(1 << USB_PORT_FEAT_CONNECTION); + else + sl811->port1 |= 1 << USB_PORT_FEAT_CONNECTION; sl811->port1 |= 1 << USB_PORT_FEAT_C_CONNECTION; diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c index c09539bad1e..d64f5724bfc 100644 --- a/drivers/usb/host/xhci-mem.c +++ b/drivers/usb/host/xhci-mem.c @@ -582,6 +582,19 @@ static inline unsigned int xhci_get_endpoint_interval(struct usb_device *udev, return EP_INTERVAL(interval); } +/* The "Mult" field in the endpoint context is only set for SuperSpeed devices. + * High speed endpoint descriptors can define "the number of additional + * transaction opportunities per microframe", but that goes in the Max Burst + * endpoint context field. + */ +static inline u32 xhci_get_endpoint_mult(struct usb_device *udev, + struct usb_host_endpoint *ep) +{ + if (udev->speed != USB_SPEED_SUPER || !ep->ss_ep_comp) + return 0; + return ep->ss_ep_comp->desc.bmAttributes; +} + static inline u32 xhci_get_endpoint_type(struct usb_device *udev, struct usb_host_endpoint *ep) { @@ -612,6 +625,36 @@ static inline u32 xhci_get_endpoint_type(struct usb_device *udev, return type; } +/* Return the maximum endpoint service interval time (ESIT) payload. + * Basically, this is the maxpacket size, multiplied by the burst size + * and mult size. + */ +static inline u32 xhci_get_max_esit_payload(struct xhci_hcd *xhci, + struct usb_device *udev, + struct usb_host_endpoint *ep) +{ + int max_burst; + int max_packet; + + /* Only applies for interrupt or isochronous endpoints */ + if (usb_endpoint_xfer_control(&ep->desc) || + usb_endpoint_xfer_bulk(&ep->desc)) + return 0; + + if (udev->speed == USB_SPEED_SUPER) { + if (ep->ss_ep_comp) + return ep->ss_ep_comp->desc.wBytesPerInterval; + xhci_warn(xhci, "WARN no SS endpoint companion descriptor.\n"); + /* Assume no bursts, no multiple opportunities to send. */ + return ep->desc.wMaxPacketSize; + } + + max_packet = ep->desc.wMaxPacketSize & 0x3ff; + max_burst = (ep->desc.wMaxPacketSize & 0x1800) >> 11; + /* A 0 in max burst means 1 transfer per ESIT */ + return max_packet * (max_burst + 1); +} + int xhci_endpoint_init(struct xhci_hcd *xhci, struct xhci_virt_device *virt_dev, struct usb_device *udev, @@ -623,6 +666,7 @@ int xhci_endpoint_init(struct xhci_hcd *xhci, struct xhci_ring *ep_ring; unsigned int max_packet; unsigned int max_burst; + u32 max_esit_payload; ep_index = xhci_get_endpoint_index(&ep->desc); ep_ctx = xhci_get_ep_ctx(xhci, virt_dev->in_ctx, ep_index); @@ -644,6 +688,7 @@ int xhci_endpoint_init(struct xhci_hcd *xhci, ep_ctx->deq = ep_ring->first_seg->dma | ep_ring->cycle_state; ep_ctx->ep_info = xhci_get_endpoint_interval(udev, ep); + ep_ctx->ep_info |= EP_MULT(xhci_get_endpoint_mult(udev, ep)); /* FIXME dig Mult and streams info out of ep companion desc */ @@ -689,6 +734,26 @@ int xhci_endpoint_init(struct xhci_hcd *xhci, default: BUG(); } + max_esit_payload = xhci_get_max_esit_payload(xhci, udev, ep); + ep_ctx->tx_info = MAX_ESIT_PAYLOAD_FOR_EP(max_esit_payload); + + /* + * XXX no idea how to calculate the average TRB buffer length for bulk + * endpoints, as the driver gives us no clue how big each scatter gather + * list entry (or buffer) is going to be. + * + * For isochronous and interrupt endpoints, we set it to the max + * available, until we have new API in the USB core to allow drivers to + * declare how much bandwidth they actually need. + * + * Normally, it would be calculated by taking the total of the buffer + * lengths in the TD and then dividing by the number of TRBs in a TD, + * including link TRBs, No-op TRBs, and Event data TRBs. Since we don't + * use Event Data TRBs, and we don't chain in a link TRB on short + * transfers, we're basically dividing by 1. + */ + ep_ctx->tx_info |= AVG_TRB_LENGTH_FOR_EP(max_esit_payload); + /* FIXME Debug endpoint context */ return 0; } diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index e5eb09b2f38..ea389e9a493 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -609,6 +609,10 @@ struct xhci_ep_ctx { #define MAX_PACKET_MASK (0xffff << 16) #define MAX_PACKET_DECODED(p) (((p) >> 16) & 0xffff) +/* tx_info bitmasks */ +#define AVG_TRB_LENGTH_FOR_EP(p) ((p) & 0xffff) +#define MAX_ESIT_PAYLOAD_FOR_EP(p) (((p) & 0xffff) << 16) + /** * struct xhci_input_control_context diff --git a/drivers/usb/musb/Kconfig b/drivers/usb/musb/Kconfig index b4c783c284b..07fe490b44d 100644 --- a/drivers/usb/musb/Kconfig +++ b/drivers/usb/musb/Kconfig @@ -42,7 +42,7 @@ config USB_MUSB_SOC default y if (BF52x && !BF522 && !BF523) comment "DaVinci 35x and 644x USB support" - depends on USB_MUSB_HDRC && ARCH_DAVINCI + depends on USB_MUSB_HDRC && ARCH_DAVINCI_DMx comment "OMAP 243x high speed USB support" depends on USB_MUSB_HDRC && ARCH_OMAP2430 diff --git a/drivers/usb/musb/Makefile b/drivers/usb/musb/Makefile index 85710ccc188..3a485dabebb 100644 --- a/drivers/usb/musb/Makefile +++ b/drivers/usb/musb/Makefile @@ -6,7 +6,7 @@ musb_hdrc-objs := musb_core.o obj-$(CONFIG_USB_MUSB_HDRC) += musb_hdrc.o -ifeq ($(CONFIG_ARCH_DAVINCI),y) +ifeq ($(CONFIG_ARCH_DAVINCI_DMx),y) musb_hdrc-objs += davinci.o endif diff --git a/drivers/usb/musb/blackfin.c b/drivers/usb/musb/blackfin.c index 719a22d664e..ec8d324237f 100644 --- a/drivers/usb/musb/blackfin.c +++ b/drivers/usb/musb/blackfin.c @@ -172,13 +172,7 @@ static irqreturn_t blackfin_interrupt(int irq, void *__hci) spin_unlock_irqrestore(&musb->lock, flags); - /* REVISIT we sometimes get spurious IRQs on g_ep0 - * not clear why... fall in BF54x too. - */ - if (retval != IRQ_HANDLED) - DBG(5, "spurious?\n"); - - return IRQ_HANDLED; + return retval; } static void musb_conn_timer_handler(unsigned long _musb) diff --git a/drivers/usb/musb/davinci.c b/drivers/usb/musb/davinci.c index 29bce5c0fd1..ce2e16fee0d 100644 --- a/drivers/usb/musb/davinci.c +++ b/drivers/usb/musb/davinci.c @@ -444,6 +444,8 @@ int __init musb_platform_init(struct musb *musb) return 0; fail: + clk_disable(musb->clock); + usb_nop_xceiv_unregister(); return -ENODEV; } diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c index 0e8b8ab1d16..705cc4ad873 100644 --- a/drivers/usb/musb/musb_core.c +++ b/drivers/usb/musb/musb_core.c @@ -965,10 +965,8 @@ static void musb_shutdown(struct platform_device *pdev) spin_lock_irqsave(&musb->lock, flags); musb_platform_disable(musb); musb_generic_disable(musb); - if (musb->clock) { + if (musb->clock) clk_put(musb->clock); - musb->clock = NULL; - } spin_unlock_irqrestore(&musb->lock, flags); /* FIXME power down */ @@ -1853,15 +1851,6 @@ static void musb_free(struct musb *musb) put_device(musb->xceiv->dev); #endif - musb_writeb(musb->mregs, MUSB_DEVCTL, 0); - musb_platform_exit(musb); - musb_writeb(musb->mregs, MUSB_DEVCTL, 0); - - if (musb->clock) { - clk_disable(musb->clock); - clk_put(musb->clock); - } - #ifdef CONFIG_USB_MUSB_HDRC_HCD usb_put_hcd(musb_to_hcd(musb)); #else @@ -1889,8 +1878,10 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl) */ if (!plat) { dev_dbg(dev, "no platform_data?\n"); - return -ENODEV; + status = -ENODEV; + goto fail0; } + switch (plat->mode) { case MUSB_HOST: #ifdef CONFIG_USB_MUSB_HDRC_HCD @@ -1912,13 +1903,16 @@ bad_config: #endif default: dev_err(dev, "incompatible Kconfig role setting\n"); - return -EINVAL; + status = -EINVAL; + goto fail0; } /* allocate */ musb = allocate_instance(dev, plat->config, ctrl); - if (!musb) - return -ENOMEM; + if (!musb) { + status = -ENOMEM; + goto fail0; + } spin_lock_init(&musb->lock); musb->board_mode = plat->mode; @@ -1936,7 +1930,7 @@ bad_config: if (IS_ERR(musb->clock)) { status = PTR_ERR(musb->clock); musb->clock = NULL; - goto fail; + goto fail1; } } @@ -1955,12 +1949,12 @@ bad_config: */ musb->isr = generic_interrupt; status = musb_platform_init(musb); - if (status < 0) - goto fail; + goto fail2; + if (!musb->isr) { status = -ENODEV; - goto fail2; + goto fail3; } #ifndef CONFIG_MUSB_PIO_ONLY @@ -1986,7 +1980,7 @@ bad_config: ? MUSB_CONTROLLER_MHDRC : MUSB_CONTROLLER_HDRC, musb); if (status < 0) - goto fail2; + goto fail3; #ifdef CONFIG_USB_MUSB_OTG setup_timer(&musb->otg_timer, musb_otg_timer_func, (unsigned long) musb); @@ -1999,7 +1993,7 @@ bad_config: if (request_irq(nIrq, musb->isr, 0, dev_name(dev), musb)) { dev_err(dev, "request_irq %d failed!\n", nIrq); status = -ENODEV; - goto fail2; + goto fail3; } musb->nIrq = nIrq; /* FIXME this handles wakeup irqs wrong */ @@ -2039,8 +2033,6 @@ bad_config: musb->xceiv->state = OTG_STATE_A_IDLE; status = usb_add_hcd(musb_to_hcd(musb), -1, 0); - if (status) - goto fail; DBG(1, "%s mode, status %d, devctl %02x %c\n", "HOST", status, @@ -2055,8 +2047,6 @@ bad_config: musb->xceiv->state = OTG_STATE_B_IDLE; status = musb_gadget_setup(musb); - if (status) - goto fail; DBG(1, "%s mode, status %d, dev%02x\n", is_otg_enabled(musb) ? "OTG" : "PERIPHERAL", @@ -2064,12 +2054,14 @@ bad_config: musb_readb(musb->mregs, MUSB_DEVCTL)); } + if (status < 0) + goto fail3; #ifdef CONFIG_SYSFS status = sysfs_create_group(&musb->controller->kobj, &musb_attr_group); -#endif if (status) - goto fail2; + goto fail4; +#endif dev_info(dev, "USB %s mode controller at %p using %s, IRQ %d\n", ({char *s; @@ -2085,17 +2077,29 @@ bad_config: return 0; -fail2: +fail4: + if (!is_otg_enabled(musb) && is_host_enabled(musb)) + usb_remove_hcd(musb_to_hcd(musb)); + else + musb_gadget_cleanup(musb); + +fail3: + if (musb->irq_wake) + device_init_wakeup(dev, 0); musb_platform_exit(musb); -fail: - dev_err(musb->controller, - "musb_init_controller failed with status %d\n", status); +fail2: if (musb->clock) clk_put(musb->clock); - device_init_wakeup(dev, 0); + +fail1: + dev_err(musb->controller, + "musb_init_controller failed with status %d\n", status); + musb_free(musb); +fail0: + return status; } @@ -2132,7 +2136,6 @@ static int __init musb_probe(struct platform_device *pdev) /* clobbered by use_dma=n */ orig_dma_mask = dev->dma_mask; #endif - status = musb_init_controller(dev, irq, base); if (status < 0) iounmap(base); @@ -2155,6 +2158,10 @@ static int __exit musb_remove(struct platform_device *pdev) if (musb->board_mode == MUSB_HOST) usb_remove_hcd(musb_to_hcd(musb)); #endif + musb_writeb(musb->mregs, MUSB_DEVCTL, 0); + musb_platform_exit(musb); + musb_writeb(musb->mregs, MUSB_DEVCTL, 0); + musb_free(musb); iounmap(ctrl_base); device_init_wakeup(&pdev->dev, 0); @@ -2176,6 +2183,7 @@ void musb_save_context(struct musb *musb) if (is_host_enabled(musb)) { musb_context.frame = musb_readw(musb_base, MUSB_FRAME); musb_context.testmode = musb_readb(musb_base, MUSB_TESTMODE); + musb_context.busctl = musb_read_ulpi_buscontrol(musb->mregs); } musb_context.power = musb_readb(musb_base, MUSB_POWER); musb_context.intrtxe = musb_readw(musb_base, MUSB_INTRTXE); @@ -2247,6 +2255,7 @@ void musb_restore_context(struct musb *musb) if (is_host_enabled(musb)) { musb_writew(musb_base, MUSB_FRAME, musb_context.frame); musb_writeb(musb_base, MUSB_TESTMODE, musb_context.testmode); + musb_write_ulpi_buscontrol(musb->mregs, musb_context.busctl); } musb_writeb(musb_base, MUSB_POWER, musb_context.power); musb_writew(musb_base, MUSB_INTRTXE, musb_context.intrtxe); diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h index cd9f4a9a06c..ac17b004909 100644 --- a/drivers/usb/musb/musb_core.h +++ b/drivers/usb/musb/musb_core.h @@ -478,7 +478,7 @@ struct musb_context_registers { u16 frame; u8 index, testmode; - u8 devctl, misc; + u8 devctl, busctl, misc; struct musb_csr_regs index_regs[MUSB_C_NUM_EPS]; }; diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c index dec896e888d..877d20b1dff 100644 --- a/drivers/usb/musb/musb_host.c +++ b/drivers/usb/musb/musb_host.c @@ -2042,6 +2042,7 @@ static int musb_urb_enqueue( * odd, rare, error prone, but legal. */ kfree(qh); + qh = NULL; ret = 0; } else ret = musb_schedule(musb, qh, diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c index 490cdf15ccb..82592633502 100644 --- a/drivers/usb/musb/omap2430.c +++ b/drivers/usb/musb/omap2430.c @@ -331,8 +331,5 @@ int musb_platform_exit(struct musb *musb) musb_platform_suspend(musb); - clk_put(musb->clock); - musb->clock = NULL; - return 0; } diff --git a/drivers/usb/musb/tusb6010.c b/drivers/usb/musb/tusb6010.c index ab776a8d98c..60d3938cafc 100644 --- a/drivers/usb/musb/tusb6010.c +++ b/drivers/usb/musb/tusb6010.c @@ -29,6 +29,19 @@ static void tusb_source_power(struct musb *musb, int is_on); #define TUSB_REV_MAJOR(reg_val) ((reg_val >> 4) & 0xf) #define TUSB_REV_MINOR(reg_val) (reg_val & 0xf) +#ifdef CONFIG_PM +/* REVISIT: These should be only needed if somebody implements off idle */ +void musb_platform_save_context(struct musb *musb, + struct musb_context_registers *musb_context) +{ +} + +void musb_platform_restore_context(struct musb *musb, + struct musb_context_registers *musb_context) +{ +} +#endif + /* * Checks the revision. We need to use the DMA register as 3.0 does not * have correct versions for TUSB_PRCM_REV or TUSB_INT_CTRL_REV. diff --git a/drivers/usb/musb/tusb6010_omap.c b/drivers/usb/musb/tusb6010_omap.c index 5afa070d7dc..c061a88f2b0 100644 --- a/drivers/usb/musb/tusb6010_omap.c +++ b/drivers/usb/musb/tusb6010_omap.c @@ -39,7 +39,7 @@ struct tusb_omap_dma_ch { struct tusb_omap_dma *tusb_dma; - void __iomem *dma_addr; + dma_addr_t dma_addr; u32 len; u16 packet_sz; @@ -126,6 +126,7 @@ static void tusb_omap_dma_cb(int lch, u16 ch_status, void *data) struct tusb_omap_dma_ch *chdat = to_chdat(channel); struct tusb_omap_dma *tusb_dma = chdat->tusb_dma; struct musb *musb = chdat->musb; + struct device *dev = musb->controller; struct musb_hw_ep *hw_ep = chdat->hw_ep; void __iomem *ep_conf = hw_ep->conf; void __iomem *mbase = musb->mregs; @@ -173,13 +174,15 @@ static void tusb_omap_dma_cb(int lch, u16 ch_status, void *data) DBG(3, "Using PIO for remaining %lu bytes\n", pio); buf = phys_to_virt((u32)chdat->dma_addr) + chdat->transfer_len; if (chdat->tx) { - dma_cache_maint(phys_to_virt((u32)chdat->dma_addr), - chdat->transfer_len, DMA_TO_DEVICE); + dma_unmap_single(dev, chdat->dma_addr, + chdat->transfer_len, + DMA_TO_DEVICE); musb_write_fifo(hw_ep, pio, buf); } else { + dma_unmap_single(dev, chdat->dma_addr, + chdat->transfer_len, + DMA_FROM_DEVICE); musb_read_fifo(hw_ep, pio, buf); - dma_cache_maint(phys_to_virt((u32)chdat->dma_addr), - chdat->transfer_len, DMA_FROM_DEVICE); } channel->actual_len += pio; } @@ -224,6 +227,7 @@ static int tusb_omap_dma_program(struct dma_channel *channel, u16 packet_sz, struct tusb_omap_dma_ch *chdat = to_chdat(channel); struct tusb_omap_dma *tusb_dma = chdat->tusb_dma; struct musb *musb = chdat->musb; + struct device *dev = musb->controller; struct musb_hw_ep *hw_ep = chdat->hw_ep; void __iomem *mbase = musb->mregs; void __iomem *ep_conf = hw_ep->conf; @@ -299,14 +303,16 @@ static int tusb_omap_dma_program(struct dma_channel *channel, u16 packet_sz, chdat->packet_sz = packet_sz; chdat->len = len; channel->actual_len = 0; - chdat->dma_addr = (void __iomem *)dma_addr; + chdat->dma_addr = dma_addr; channel->status = MUSB_DMA_STATUS_BUSY; /* Since we're recycling dma areas, we need to clean or invalidate */ if (chdat->tx) - dma_cache_maint(phys_to_virt(dma_addr), len, DMA_TO_DEVICE); + dma_map_single(dev, phys_to_virt(dma_addr), len, + DMA_TO_DEVICE); else - dma_cache_maint(phys_to_virt(dma_addr), len, DMA_FROM_DEVICE); + dma_map_single(dev, phys_to_virt(dma_addr), len, + DMA_FROM_DEVICE); /* Use 16-bit transfer if dma_addr is not 32-bit aligned */ if ((dma_addr & 0x3) == 0) { diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index ca9d866672a..84d0edad8e4 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -305,6 +305,11 @@ static int option_resume(struct usb_serial *serial); #define ZTE_PRODUCT_CDMA_TECH 0xfffe #define ZTE_PRODUCT_AC8710 0xfff1 #define ZTE_PRODUCT_AC2726 0xfff5 +#define ZTE_PRODUCT_AC8710T 0xffff + +/* ZTE PRODUCTS -- alternate vendor ID */ +#define ZTE_VENDOR_ID2 0x1d6b +#define ZTE_PRODUCT_MF_330 0x0002 #define BENQ_VENDOR_ID 0x04a5 #define BENQ_PRODUCT_H10 0x4068 @@ -373,6 +378,8 @@ static int option_resume(struct usb_serial *serial); #define HAIER_VENDOR_ID 0x201e #define HAIER_PRODUCT_CE100 0x2009 +#define CINTERION_VENDOR_ID 0x0681 + /* some devices interfaces need special handling due to a number of reasons */ enum option_blacklist_reason { OPTION_BLACKLIST_NONE = 0, @@ -679,6 +686,8 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_CDMA_TECH, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AC8710, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AC2726, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AC8710T, 0xff, 0xff, 0xff) }, + { USB_DEVICE(ZTE_VENDOR_ID2, ZTE_PRODUCT_MF_330) }, { USB_DEVICE(BENQ_VENDOR_ID, BENQ_PRODUCT_H10) }, { USB_DEVICE(DLINK_VENDOR_ID, DLINK_PRODUCT_DWM_652) }, { USB_DEVICE(ALINK_VENDOR_ID, DLINK_PRODUCT_DWM_652_U5) }, /* Yes, ALINK_VENDOR_ID */ @@ -716,6 +725,7 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE(PIRELLI_VENDOR_ID, PIRELLI_PRODUCT_1011)}, { USB_DEVICE(PIRELLI_VENDOR_ID, PIRELLI_PRODUCT_1012)}, + { USB_DEVICE(CINTERION_VENDOR_ID, 0x0047) }, { } /* Terminating entry */ }; MODULE_DEVICE_TABLE(usb, option_ids); diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c index c97a0bb5b6d..c28b1607eac 100644 --- a/drivers/usb/serial/pl2303.c +++ b/drivers/usb/serial/pl2303.c @@ -59,6 +59,7 @@ static const struct usb_device_id id_table[] = { { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_ALDIGA) }, { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_MMX) }, { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_GPRS) }, + { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_HCR331) }, { USB_DEVICE(IODATA_VENDOR_ID, IODATA_PRODUCT_ID) }, { USB_DEVICE(IODATA_VENDOR_ID, IODATA_PRODUCT_ID_RSAQ5) }, { USB_DEVICE(ATEN_VENDOR_ID, ATEN_PRODUCT_ID) }, diff --git a/drivers/usb/serial/pl2303.h b/drivers/usb/serial/pl2303.h index a352d5f3a59..23c09b38b9e 100644 --- a/drivers/usb/serial/pl2303.h +++ b/drivers/usb/serial/pl2303.h @@ -20,6 +20,7 @@ #define PL2303_PRODUCT_ID_ALDIGA 0x0611 #define PL2303_PRODUCT_ID_MMX 0x0612 #define PL2303_PRODUCT_ID_GPRS 0x0609 +#define PL2303_PRODUCT_ID_HCR331 0x331a #define ATEN_VENDOR_ID 0x0557 #define ATEN_VENDOR_ID2 0x0547 diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c index 880e990abb0..e1bfda33f5b 100644 --- a/drivers/usb/serial/ti_usb_3410_5052.c +++ b/drivers/usb/serial/ti_usb_3410_5052.c @@ -1735,7 +1735,7 @@ static int ti_download_firmware(struct ti_device *tdev) return -ENOENT; } if (fw_p->size > TI_FIRMWARE_BUF_SIZE) { - dev_err(&dev->dev, "%s - firmware too large %d \n", __func__, fw_p->size); + dev_err(&dev->dev, "%s - firmware too large %zu\n", __func__, fw_p->size); return -ENOENT; } diff --git a/drivers/watchdog/ep93xx_wdt.c b/drivers/watchdog/ep93xx_wdt.c index 88ed54e50f7..59359c9a5e0 100644 --- a/drivers/watchdog/ep93xx_wdt.c +++ b/drivers/watchdog/ep93xx_wdt.c @@ -244,7 +244,7 @@ MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started"); module_param(timeout, int, 0); MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds. (1<=timeout<=3600, default=" - __MODULE_STRING(WATCHDOG_TIMEOUT) ")"); + __MODULE_STRING(WDT_TIMEOUT) ")"); MODULE_AUTHOR("Ray Lehtiniemi <rayl@mail.com>," "Alessandro Zummo <a.zummo@towertech.it>"); diff --git a/fs/ceph/addr.c b/fs/ceph/addr.c index 412593703d1..4b42c2bb603 100644 --- a/fs/ceph/addr.c +++ b/fs/ceph/addr.c @@ -509,7 +509,7 @@ static void writepages_finish(struct ceph_osd_request *req, u64 bytes = 0; struct ceph_client *client = ceph_inode_to_client(inode); long writeback_stat; - unsigned issued = __ceph_caps_issued(ci, NULL); + unsigned issued = ceph_caps_issued(ci); /* parse reply */ replyhead = msg->front.iov_base; diff --git a/fs/ceph/auth.c b/fs/ceph/auth.c index f6394b94b86..818afe72e6c 100644 --- a/fs/ceph/auth.c +++ b/fs/ceph/auth.c @@ -3,6 +3,7 @@ #include <linux/module.h> #include <linux/slab.h> #include <linux/err.h> +#include <linux/slab.h> #include "types.h" #include "auth_none.h" diff --git a/fs/ceph/auth_none.h b/fs/ceph/auth_none.h index 56c05533a31..8164df1a08b 100644 --- a/fs/ceph/auth_none.h +++ b/fs/ceph/auth_none.h @@ -1,6 +1,8 @@ #ifndef _FS_CEPH_AUTH_NONE_H #define _FS_CEPH_AUTH_NONE_H +#include <linux/slab.h> + #include "auth.h" /* diff --git a/fs/ceph/auth_x.c b/fs/ceph/auth_x.c index d9001a4dc8c..fee5a08da88 100644 --- a/fs/ceph/auth_x.c +++ b/fs/ceph/auth_x.c @@ -12,8 +12,6 @@ #include "auth.h" #include "decode.h" -struct kmem_cache *ceph_x_ticketbuf_cachep; - #define TEMP_TICKET_BUF_LEN 256 static void ceph_x_validate_tickets(struct ceph_auth_client *ac, int *pneed); @@ -131,13 +129,12 @@ static int ceph_x_proc_ticket_reply(struct ceph_auth_client *ac, char *ticket_buf; u8 struct_v; - dbuf = kmem_cache_alloc(ceph_x_ticketbuf_cachep, GFP_NOFS | GFP_ATOMIC); + dbuf = kmalloc(TEMP_TICKET_BUF_LEN, GFP_NOFS); if (!dbuf) return -ENOMEM; ret = -ENOMEM; - ticket_buf = kmem_cache_alloc(ceph_x_ticketbuf_cachep, - GFP_NOFS | GFP_ATOMIC); + ticket_buf = kmalloc(TEMP_TICKET_BUF_LEN, GFP_NOFS); if (!ticket_buf) goto out_dbuf; @@ -251,9 +248,9 @@ static int ceph_x_proc_ticket_reply(struct ceph_auth_client *ac, ret = 0; out: - kmem_cache_free(ceph_x_ticketbuf_cachep, ticket_buf); + kfree(ticket_buf); out_dbuf: - kmem_cache_free(ceph_x_ticketbuf_cachep, dbuf); + kfree(dbuf); return ret; bad: @@ -605,8 +602,6 @@ static void ceph_x_destroy(struct ceph_auth_client *ac) remove_ticket_handler(ac, th); } - kmem_cache_destroy(ceph_x_ticketbuf_cachep); - kfree(ac->private); ac->private = NULL; } @@ -641,26 +636,20 @@ int ceph_x_init(struct ceph_auth_client *ac) int ret; dout("ceph_x_init %p\n", ac); + ret = -ENOMEM; xi = kzalloc(sizeof(*xi), GFP_NOFS); if (!xi) - return -ENOMEM; + goto out; - ret = -ENOMEM; - ceph_x_ticketbuf_cachep = kmem_cache_create("ceph_x_ticketbuf", - TEMP_TICKET_BUF_LEN, 8, - (SLAB_RECLAIM_ACCOUNT|SLAB_MEM_SPREAD), - NULL); - if (!ceph_x_ticketbuf_cachep) - goto done_nomem; ret = -EINVAL; if (!ac->secret) { pr_err("no secret set (for auth_x protocol)\n"); - goto done_nomem; + goto out_nomem; } ret = ceph_crypto_key_unarmor(&xi->secret, ac->secret); if (ret) - goto done_nomem; + goto out_nomem; xi->starting = true; xi->ticket_handlers = RB_ROOT; @@ -670,10 +659,9 @@ int ceph_x_init(struct ceph_auth_client *ac) ac->ops = &ceph_x_ops; return 0; -done_nomem: +out_nomem: kfree(xi); - if (ceph_x_ticketbuf_cachep) - kmem_cache_destroy(ceph_x_ticketbuf_cachep); +out: return ret; } diff --git a/fs/ceph/caps.c b/fs/ceph/caps.c index aa2239fa9a3..0c168180686 100644 --- a/fs/ceph/caps.c +++ b/fs/ceph/caps.c @@ -1861,8 +1861,8 @@ static void kick_flushing_capsnaps(struct ceph_mds_client *mdsc, } else { pr_err("%p auth cap %p not mds%d ???\n", inode, cap, session->s_mds); - spin_unlock(&inode->i_lock); } + spin_unlock(&inode->i_lock); } } diff --git a/fs/ceph/dir.c b/fs/ceph/dir.c index ea8ee2e526a..650d2db5ed2 100644 --- a/fs/ceph/dir.c +++ b/fs/ceph/dir.c @@ -880,7 +880,16 @@ static int ceph_rename(struct inode *old_dir, struct dentry *old_dentry, * do_request, above). If there is no trace, we need * to do it here. */ + + /* d_move screws up d_subdirs order */ + ceph_i_clear(new_dir, CEPH_I_COMPLETE); + d_move(old_dentry, new_dentry); + + /* ensure target dentry is invalidated, despite + rehashing bug in vfs_rename_dir */ + new_dentry->d_time = jiffies; + ceph_dentry(new_dentry)->lease_shared_gen = 0; } ceph_mdsc_put_request(req); return err; diff --git a/fs/ceph/file.c b/fs/ceph/file.c index 4add3d5da2c..ed6f19721d6 100644 --- a/fs/ceph/file.c +++ b/fs/ceph/file.c @@ -665,7 +665,8 @@ more: * throw out any page cache pages in this range. this * may block. */ - truncate_inode_pages_range(inode->i_mapping, pos, pos+len); + truncate_inode_pages_range(inode->i_mapping, pos, + (pos+len) | (PAGE_CACHE_SIZE-1)); } else { pages = alloc_page_vector(num_pages); if (IS_ERR(pages)) { diff --git a/fs/ceph/inode.c b/fs/ceph/inode.c index 26f883c275e..261f3e6c0bc 100644 --- a/fs/ceph/inode.c +++ b/fs/ceph/inode.c @@ -997,6 +997,10 @@ int ceph_fill_trace(struct super_block *sb, struct ceph_mds_request *req, dn, dn->d_name.len, dn->d_name.name); dout("fill_trace doing d_move %p -> %p\n", req->r_old_dentry, dn); + + /* d_move screws up d_subdirs order */ + ceph_i_clear(dir, CEPH_I_COMPLETE); + d_move(req->r_old_dentry, dn); dout(" src %p '%.*s' dst %p '%.*s'\n", req->r_old_dentry, diff --git a/fs/ceph/messenger.c b/fs/ceph/messenger.c index cdaaa131add..509f57d9ccb 100644 --- a/fs/ceph/messenger.c +++ b/fs/ceph/messenger.c @@ -1334,6 +1334,7 @@ static int read_partial_message(struct ceph_connection *con) unsigned front_len, middle_len, data_len, data_off; int datacrc = con->msgr->nocrc; int skip; + u64 seq; dout("read_partial_message con %p msg %p\n", con, m); @@ -1368,6 +1369,25 @@ static int read_partial_message(struct ceph_connection *con) return -EIO; data_off = le16_to_cpu(con->in_hdr.data_off); + /* verify seq# */ + seq = le64_to_cpu(con->in_hdr.seq); + if ((s64)seq - (s64)con->in_seq < 1) { + pr_info("skipping %s%lld %s seq %lld, expected %lld\n", + ENTITY_NAME(con->peer_name), + pr_addr(&con->peer_addr.in_addr), + seq, con->in_seq + 1); + con->in_base_pos = -front_len - middle_len - data_len - + sizeof(m->footer); + con->in_tag = CEPH_MSGR_TAG_READY; + con->in_seq++; + return 0; + } else if ((s64)seq - (s64)con->in_seq > 1) { + pr_err("read_partial_message bad seq %lld expected %lld\n", + seq, con->in_seq + 1); + con->error_msg = "bad message sequence # for incoming message"; + return -EBADMSG; + } + /* allocate message? */ if (!con->in_msg) { dout("got hdr type %d front %d data %d\n", con->in_hdr.type, @@ -1379,6 +1399,7 @@ static int read_partial_message(struct ceph_connection *con) con->in_base_pos = -front_len - middle_len - data_len - sizeof(m->footer); con->in_tag = CEPH_MSGR_TAG_READY; + con->in_seq++; return 0; } if (IS_ERR(con->in_msg)) { @@ -2030,6 +2051,7 @@ void ceph_con_revoke_message(struct ceph_connection *con, struct ceph_msg *msg) ceph_msg_put(con->in_msg); con->in_msg = NULL; con->in_tag = CEPH_MSGR_TAG_READY; + con->in_seq++; } else { dout("con_revoke_pages %p msg %p pages %p no-op\n", con, con->in_msg, msg); diff --git a/fs/ceph/snap.c b/fs/ceph/snap.c index 2b881262ef6..d5114db7045 100644 --- a/fs/ceph/snap.c +++ b/fs/ceph/snap.c @@ -869,16 +869,20 @@ skip_inode: continue; ci = ceph_inode(inode); spin_lock(&inode->i_lock); - if (!ci->i_snap_realm) - goto split_skip_inode; - ceph_put_snap_realm(mdsc, ci->i_snap_realm); - spin_lock(&realm->inodes_with_caps_lock); - list_add(&ci->i_snap_realm_item, - &realm->inodes_with_caps); - ci->i_snap_realm = realm; - spin_unlock(&realm->inodes_with_caps_lock); - ceph_get_snap_realm(mdsc, realm); -split_skip_inode: + if (list_empty(&ci->i_snap_realm_item)) { + struct ceph_snap_realm *oldrealm = + ci->i_snap_realm; + + dout(" moving %p to split realm %llx %p\n", + inode, realm->ino, realm); + spin_lock(&realm->inodes_with_caps_lock); + list_add(&ci->i_snap_realm_item, + &realm->inodes_with_caps); + ci->i_snap_realm = realm; + spin_unlock(&realm->inodes_with_caps_lock); + ceph_get_snap_realm(mdsc, realm); + ceph_put_snap_realm(mdsc, oldrealm); + } spin_unlock(&inode->i_lock); iput(inode); } diff --git a/fs/ceph/super.c b/fs/ceph/super.c index 75d02eaa127..f888cf487b7 100644 --- a/fs/ceph/super.c +++ b/fs/ceph/super.c @@ -996,9 +996,10 @@ static int __init init_ceph(void) if (ret) goto out_icache; - pr_info("loaded %d.%d.%d (mon/mds/osd proto %d/%d/%d)\n", - CEPH_VERSION_MAJOR, CEPH_VERSION_MINOR, CEPH_VERSION_PATCH, - CEPH_MONC_PROTOCOL, CEPH_MDSC_PROTOCOL, CEPH_OSDC_PROTOCOL); + pr_info("loaded (mon/mds/osd proto %d/%d/%d, osdmap %d/%d %d/%d)\n", + CEPH_MONC_PROTOCOL, CEPH_MDSC_PROTOCOL, CEPH_OSDC_PROTOCOL, + CEPH_OSDMAP_VERSION, CEPH_OSDMAP_VERSION_EXT, + CEPH_OSDMAP_INC_VERSION, CEPH_OSDMAP_INC_VERSION_EXT); return 0; out_icache: diff --git a/fs/ceph/super.h b/fs/ceph/super.h index e30dfbb056c..13513b80d87 100644 --- a/fs/ceph/super.h +++ b/fs/ceph/super.h @@ -10,6 +10,7 @@ #include <linux/fs.h> #include <linux/mempool.h> #include <linux/pagemap.h> +#include <linux/slab.h> #include <linux/wait.h> #include <linux/writeback.h> #include <linux/slab.h> diff --git a/fs/nilfs2/super.c b/fs/nilfs2/super.c index 0cdbc5e7655..48145f505a6 100644 --- a/fs/nilfs2/super.c +++ b/fs/nilfs2/super.c @@ -749,6 +749,7 @@ nilfs_fill_super(struct super_block *sb, void *data, int silent, sb->s_export_op = &nilfs_export_ops; sb->s_root = NULL; sb->s_time_gran = 1; + sb->s_bdi = nilfs->ns_bdi; err = load_nilfs(nilfs, sbi); if (err) diff --git a/fs/notify/inotify/Kconfig b/fs/notify/inotify/Kconfig index 3e56dbffe72..b3a159b21cf 100644 --- a/fs/notify/inotify/Kconfig +++ b/fs/notify/inotify/Kconfig @@ -15,6 +15,7 @@ config INOTIFY config INOTIFY_USER bool "Inotify support for userspace" + select ANON_INODES select FSNOTIFY default y ---help--- diff --git a/fs/ocfs2/buffer_head_io.c b/fs/ocfs2/buffer_head_io.c index ecebb227679..f9d5d3ffc75 100644 --- a/fs/ocfs2/buffer_head_io.c +++ b/fs/ocfs2/buffer_head_io.c @@ -406,6 +406,7 @@ int ocfs2_write_super_or_backup(struct ocfs2_super *osb, struct buffer_head *bh) { int ret = 0; + struct ocfs2_dinode *di = (struct ocfs2_dinode *)bh->b_data; mlog_entry_void(); @@ -425,6 +426,7 @@ int ocfs2_write_super_or_backup(struct ocfs2_super *osb, get_bh(bh); /* for end_buffer_write_sync() */ bh->b_end_io = end_buffer_write_sync; + ocfs2_compute_meta_ecc(osb->sb, bh->b_data, &di->i_check); submit_bh(WRITE, bh); wait_on_buffer(bh); diff --git a/fs/ocfs2/dlm/dlmast.c b/fs/ocfs2/dlm/dlmast.c index a795eb91f4e..12d5eb78a11 100644 --- a/fs/ocfs2/dlm/dlmast.c +++ b/fs/ocfs2/dlm/dlmast.c @@ -184,9 +184,8 @@ static void dlm_update_lvb(struct dlm_ctxt *dlm, struct dlm_lock_resource *res, BUG_ON(!lksb); /* only updates if this node masters the lockres */ + spin_lock(&res->spinlock); if (res->owner == dlm->node_num) { - - spin_lock(&res->spinlock); /* check the lksb flags for the direction */ if (lksb->flags & DLM_LKSB_GET_LVB) { mlog(0, "getting lvb from lockres for %s node\n", @@ -201,8 +200,8 @@ static void dlm_update_lvb(struct dlm_ctxt *dlm, struct dlm_lock_resource *res, * here. In the future we might want to clear it at the time * the put is actually done. */ - spin_unlock(&res->spinlock); } + spin_unlock(&res->spinlock); /* reset any lvb flags on the lksb */ lksb->flags &= ~(DLM_LKSB_PUT_LVB|DLM_LKSB_GET_LVB); diff --git a/fs/ocfs2/dlmfs/dlmfs.c b/fs/ocfs2/dlmfs/dlmfs.c index 1b0de157a08..b83d6107a1f 100644 --- a/fs/ocfs2/dlmfs/dlmfs.c +++ b/fs/ocfs2/dlmfs/dlmfs.c @@ -112,20 +112,20 @@ MODULE_PARM_DESC(capabilities, DLMFS_CAPABILITIES); * O_RDONLY -> PRMODE level * O_WRONLY -> EXMODE level * - * O_NONBLOCK -> LKM_NOQUEUE + * O_NONBLOCK -> NOQUEUE */ static int dlmfs_decode_open_flags(int open_flags, int *level, int *flags) { if (open_flags & (O_WRONLY|O_RDWR)) - *level = LKM_EXMODE; + *level = DLM_LOCK_EX; else - *level = LKM_PRMODE; + *level = DLM_LOCK_PR; *flags = 0; if (open_flags & O_NONBLOCK) - *flags |= LKM_NOQUEUE; + *flags |= DLM_LKF_NOQUEUE; return 0; } @@ -166,7 +166,7 @@ static int dlmfs_file_open(struct inode *inode, * to be able userspace to be able to distinguish a * valid lock request from one that simply couldn't be * granted. */ - if (flags & LKM_NOQUEUE && status == -EAGAIN) + if (flags & DLM_LKF_NOQUEUE && status == -EAGAIN) status = -ETXTBSY; kfree(fp); goto bail; @@ -193,7 +193,7 @@ static int dlmfs_file_release(struct inode *inode, status = 0; if (fp) { level = fp->fp_lock_level; - if (level != LKM_IVMODE) + if (level != DLM_LOCK_IV) user_dlm_cluster_unlock(&ip->ip_lockres, level); kfree(fp); @@ -262,7 +262,7 @@ static ssize_t dlmfs_file_read(struct file *filp, if ((count + *ppos) > i_size_read(inode)) readlen = i_size_read(inode) - *ppos; else - readlen = count - *ppos; + readlen = count; lvb_buf = kmalloc(readlen, GFP_NOFS); if (!lvb_buf) diff --git a/fs/ocfs2/file.c b/fs/ocfs2/file.c index 17947dc8341..a5fbd9cea96 100644 --- a/fs/ocfs2/file.c +++ b/fs/ocfs2/file.c @@ -684,6 +684,7 @@ restarted_transaction: if (why == RESTART_META) { mlog(0, "restarting function.\n"); restart_func = 1; + status = 0; } else { BUG_ON(why != RESTART_TRANS); @@ -1981,18 +1982,18 @@ relock: /* communicate with ocfs2_dio_end_io */ ocfs2_iocb_set_rw_locked(iocb, rw_level); - if (direct_io) { - ret = generic_segment_checks(iov, &nr_segs, &ocount, - VERIFY_READ); - if (ret) - goto out_dio; + ret = generic_segment_checks(iov, &nr_segs, &ocount, + VERIFY_READ); + if (ret) + goto out_dio; - count = ocount; - ret = generic_write_checks(file, ppos, &count, - S_ISBLK(inode->i_mode)); - if (ret) - goto out_dio; + count = ocount; + ret = generic_write_checks(file, ppos, &count, + S_ISBLK(inode->i_mode)); + if (ret) + goto out_dio; + if (direct_io) { written = generic_file_direct_write(iocb, iov, &nr_segs, *ppos, ppos, count, ocount); if (written < 0) { @@ -2007,7 +2008,10 @@ relock: goto out_dio; } } else { - written = __generic_file_aio_write(iocb, iov, nr_segs, ppos); + current->backing_dev_info = file->f_mapping->backing_dev_info; + written = generic_file_buffered_write(iocb, iov, nr_segs, *ppos, + ppos, count, 0); + current->backing_dev_info = NULL; } out_dio: @@ -2021,9 +2025,9 @@ out_dio: if (ret < 0) written = ret; - if (!ret && (old_size != i_size_read(inode) || - old_clusters != OCFS2_I(inode)->ip_clusters || - has_refcount)) { + if (!ret && ((old_size != i_size_read(inode)) || + (old_clusters != OCFS2_I(inode)->ip_clusters) || + has_refcount)) { ret = jbd2_journal_force_commit(osb->journal->j_journal); if (ret < 0) written = ret; diff --git a/fs/ocfs2/inode.c b/fs/ocfs2/inode.c index 07cc8bb68b6..af189887201 100644 --- a/fs/ocfs2/inode.c +++ b/fs/ocfs2/inode.c @@ -558,6 +558,7 @@ static int ocfs2_truncate_for_delete(struct ocfs2_super *osb, handle = ocfs2_start_trans(osb, OCFS2_INODE_UPDATE_CREDITS); if (IS_ERR(handle)) { status = PTR_ERR(handle); + handle = NULL; mlog_errno(status); goto out; } @@ -639,11 +640,13 @@ static int ocfs2_remove_inode(struct inode *inode, goto bail_unlock; } - status = ocfs2_orphan_del(osb, handle, orphan_dir_inode, inode, - orphan_dir_bh); - if (status < 0) { - mlog_errno(status); - goto bail_commit; + if (!(OCFS2_I(inode)->ip_flags & OCFS2_INODE_SKIP_ORPHAN_DIR)) { + status = ocfs2_orphan_del(osb, handle, orphan_dir_inode, inode, + orphan_dir_bh); + if (status < 0) { + mlog_errno(status); + goto bail_commit; + } } /* set the inodes dtime */ @@ -722,38 +725,39 @@ static void ocfs2_signal_wipe_completion(struct ocfs2_super *osb, static int ocfs2_wipe_inode(struct inode *inode, struct buffer_head *di_bh) { - int status, orphaned_slot; + int status, orphaned_slot = -1; struct inode *orphan_dir_inode = NULL; struct buffer_head *orphan_dir_bh = NULL; struct ocfs2_super *osb = OCFS2_SB(inode->i_sb); - struct ocfs2_dinode *di; + struct ocfs2_dinode *di = (struct ocfs2_dinode *) di_bh->b_data; - di = (struct ocfs2_dinode *) di_bh->b_data; - orphaned_slot = le16_to_cpu(di->i_orphaned_slot); + if (!(OCFS2_I(inode)->ip_flags & OCFS2_INODE_SKIP_ORPHAN_DIR)) { + orphaned_slot = le16_to_cpu(di->i_orphaned_slot); - status = ocfs2_check_orphan_recovery_state(osb, orphaned_slot); - if (status) - return status; + status = ocfs2_check_orphan_recovery_state(osb, orphaned_slot); + if (status) + return status; - orphan_dir_inode = ocfs2_get_system_file_inode(osb, - ORPHAN_DIR_SYSTEM_INODE, - orphaned_slot); - if (!orphan_dir_inode) { - status = -EEXIST; - mlog_errno(status); - goto bail; - } + orphan_dir_inode = ocfs2_get_system_file_inode(osb, + ORPHAN_DIR_SYSTEM_INODE, + orphaned_slot); + if (!orphan_dir_inode) { + status = -EEXIST; + mlog_errno(status); + goto bail; + } - /* Lock the orphan dir. The lock will be held for the entire - * delete_inode operation. We do this now to avoid races with - * recovery completion on other nodes. */ - mutex_lock(&orphan_dir_inode->i_mutex); - status = ocfs2_inode_lock(orphan_dir_inode, &orphan_dir_bh, 1); - if (status < 0) { - mutex_unlock(&orphan_dir_inode->i_mutex); + /* Lock the orphan dir. The lock will be held for the entire + * delete_inode operation. We do this now to avoid races with + * recovery completion on other nodes. */ + mutex_lock(&orphan_dir_inode->i_mutex); + status = ocfs2_inode_lock(orphan_dir_inode, &orphan_dir_bh, 1); + if (status < 0) { + mutex_unlock(&orphan_dir_inode->i_mutex); - mlog_errno(status); - goto bail; + mlog_errno(status); + goto bail; + } } /* we do this while holding the orphan dir lock because we @@ -794,6 +798,9 @@ static int ocfs2_wipe_inode(struct inode *inode, mlog_errno(status); bail_unlock_dir: + if (OCFS2_I(inode)->ip_flags & OCFS2_INODE_SKIP_ORPHAN_DIR) + return status; + ocfs2_inode_unlock(orphan_dir_inode, 1); mutex_unlock(&orphan_dir_inode->i_mutex); brelse(orphan_dir_bh); @@ -889,7 +896,8 @@ static int ocfs2_query_inode_wipe(struct inode *inode, /* Do some basic inode verification... */ di = (struct ocfs2_dinode *) di_bh->b_data; - if (!(di->i_flags & cpu_to_le32(OCFS2_ORPHANED_FL))) { + if (!(di->i_flags & cpu_to_le32(OCFS2_ORPHANED_FL)) && + !(oi->ip_flags & OCFS2_INODE_SKIP_ORPHAN_DIR)) { /* * Inodes in the orphan dir must have ORPHANED_FL. The only * inodes that come back out of the orphan dir are reflink diff --git a/fs/ocfs2/inode.h b/fs/ocfs2/inode.h index ba4fe07b293..0b28e1921a3 100644 --- a/fs/ocfs2/inode.h +++ b/fs/ocfs2/inode.h @@ -100,6 +100,8 @@ struct ocfs2_inode_info #define OCFS2_INODE_MAYBE_ORPHANED 0x00000020 /* Does someone have the file open O_DIRECT */ #define OCFS2_INODE_OPEN_DIRECT 0x00000040 +/* Tell the inode wipe code it's not in orphan dir */ +#define OCFS2_INODE_SKIP_ORPHAN_DIR 0x00000080 static inline struct ocfs2_inode_info *OCFS2_I(struct inode *inode) { diff --git a/fs/ocfs2/namei.c b/fs/ocfs2/namei.c index b1eb50ae409..4cbb18f26c5 100644 --- a/fs/ocfs2/namei.c +++ b/fs/ocfs2/namei.c @@ -408,23 +408,28 @@ static int ocfs2_mknod(struct inode *dir, } } - status = ocfs2_add_entry(handle, dentry, inode, - OCFS2_I(inode)->ip_blkno, parent_fe_bh, - &lookup); - if (status < 0) { + /* + * Do this before adding the entry to the directory. We add + * also set d_op after success so that ->d_iput() will cleanup + * the dentry lock even if ocfs2_add_entry() fails below. + */ + status = ocfs2_dentry_attach_lock(dentry, inode, + OCFS2_I(dir)->ip_blkno); + if (status) { mlog_errno(status); goto leave; } + dentry->d_op = &ocfs2_dentry_ops; - status = ocfs2_dentry_attach_lock(dentry, inode, - OCFS2_I(dir)->ip_blkno); - if (status) { + status = ocfs2_add_entry(handle, dentry, inode, + OCFS2_I(inode)->ip_blkno, parent_fe_bh, + &lookup); + if (status < 0) { mlog_errno(status); goto leave; } insert_inode_hash(inode); - dentry->d_op = &ocfs2_dentry_ops; d_instantiate(dentry, inode); status = 0; leave: @@ -445,11 +450,6 @@ leave: ocfs2_free_dir_lookup_result(&lookup); - if ((status < 0) && inode) { - clear_nlink(inode); - iput(inode); - } - if (inode_ac) ocfs2_free_alloc_context(inode_ac); @@ -459,6 +459,17 @@ leave: if (meta_ac) ocfs2_free_alloc_context(meta_ac); + /* + * We should call iput after the i_mutex of the bitmap been + * unlocked in ocfs2_free_alloc_context, or the + * ocfs2_delete_inode will mutex_lock again. + */ + if ((status < 0) && inode) { + OCFS2_I(inode)->ip_flags |= OCFS2_INODE_SKIP_ORPHAN_DIR; + clear_nlink(inode); + iput(inode); + } + mlog_exit(status); return status; @@ -1771,22 +1782,27 @@ static int ocfs2_symlink(struct inode *dir, } } - status = ocfs2_add_entry(handle, dentry, inode, - le64_to_cpu(fe->i_blkno), parent_fe_bh, - &lookup); - if (status < 0) { + /* + * Do this before adding the entry to the directory. We add + * also set d_op after success so that ->d_iput() will cleanup + * the dentry lock even if ocfs2_add_entry() fails below. + */ + status = ocfs2_dentry_attach_lock(dentry, inode, OCFS2_I(dir)->ip_blkno); + if (status) { mlog_errno(status); goto bail; } + dentry->d_op = &ocfs2_dentry_ops; - status = ocfs2_dentry_attach_lock(dentry, inode, OCFS2_I(dir)->ip_blkno); - if (status) { + status = ocfs2_add_entry(handle, dentry, inode, + le64_to_cpu(fe->i_blkno), parent_fe_bh, + &lookup); + if (status < 0) { mlog_errno(status); goto bail; } insert_inode_hash(inode); - dentry->d_op = &ocfs2_dentry_ops; d_instantiate(dentry, inode); bail: if (status < 0 && did_quota) @@ -1811,6 +1827,7 @@ bail: if (xattr_ac) ocfs2_free_alloc_context(xattr_ac); if ((status < 0) && inode) { + OCFS2_I(inode)->ip_flags |= OCFS2_INODE_SKIP_ORPHAN_DIR; clear_nlink(inode); iput(inode); } @@ -1976,6 +1993,7 @@ static int ocfs2_orphan_add(struct ocfs2_super *osb, } le32_add_cpu(&fe->i_flags, OCFS2_ORPHANED_FL); + OCFS2_I(inode)->ip_flags &= ~OCFS2_INODE_SKIP_ORPHAN_DIR; /* Record which orphan dir our inode now resides * in. delete_inode will use this to determine which orphan diff --git a/fs/ocfs2/refcounttree.c b/fs/ocfs2/refcounttree.c index bd96f6c7877..5cbcd0f008f 100644 --- a/fs/ocfs2/refcounttree.c +++ b/fs/ocfs2/refcounttree.c @@ -4083,6 +4083,9 @@ static int ocfs2_complete_reflink(struct inode *s_inode, di->i_attr = s_di->i_attr; if (preserve) { + t_inode->i_uid = s_inode->i_uid; + t_inode->i_gid = s_inode->i_gid; + t_inode->i_mode = s_inode->i_mode; di->i_uid = s_di->i_uid; di->i_gid = s_di->i_gid; di->i_mode = s_di->i_mode; diff --git a/include/linux/i2c.h b/include/linux/i2c.h index 0a5da639b32..6ed1d59bfb1 100644 --- a/include/linux/i2c.h +++ b/include/linux/i2c.h @@ -355,6 +355,8 @@ struct i2c_adapter { int nr; char name[48]; struct completion dev_released; + + struct list_head userspace_clients; }; #define to_i2c_adapter(d) container_of(d, struct i2c_adapter, dev) diff --git a/include/linux/usb.h b/include/linux/usb.h index ce1323c4e47..739f1fd1cc1 100644 --- a/include/linux/usb.h +++ b/include/linux/usb.h @@ -1085,7 +1085,7 @@ typedef void (*usb_complete_t)(struct urb *); * Alternatively, drivers may pass the URB_NO_xxx_DMA_MAP transfer flags, * which tell the host controller driver that no such mapping is needed since * the device driver is DMA-aware. For example, a device driver might - * allocate a DMA buffer with usb_buffer_alloc() or call usb_buffer_map(). + * allocate a DMA buffer with usb_alloc_coherent() or call usb_buffer_map(). * When these transfer flags are provided, host controller drivers will * attempt to use the dma addresses found in the transfer_dma and/or * setup_dma fields rather than determining a dma address themselves. @@ -1366,11 +1366,23 @@ static inline int usb_urb_dir_out(struct urb *urb) return (urb->transfer_flags & URB_DIR_MASK) == URB_DIR_OUT; } -void *usb_buffer_alloc(struct usb_device *dev, size_t size, +void *usb_alloc_coherent(struct usb_device *dev, size_t size, gfp_t mem_flags, dma_addr_t *dma); -void usb_buffer_free(struct usb_device *dev, size_t size, +void usb_free_coherent(struct usb_device *dev, size_t size, void *addr, dma_addr_t dma); +/* Compatible macros while we switch over */ +static inline void *usb_buffer_alloc(struct usb_device *dev, size_t size, + gfp_t mem_flags, dma_addr_t *dma) +{ + return usb_alloc_coherent(dev, size, mem_flags, dma); +} +static inline void usb_buffer_free(struct usb_device *dev, size_t size, + void *addr, dma_addr_t dma) +{ + return usb_free_coherent(dev, size, addr, dma); +} + #if 0 struct urb *usb_buffer_map(struct urb *urb); void usb_buffer_dmasync(struct urb *urb); diff --git a/kernel/cgroup_freezer.c b/kernel/cgroup_freezer.c index da5e1397553..e5c0244962b 100644 --- a/kernel/cgroup_freezer.c +++ b/kernel/cgroup_freezer.c @@ -205,9 +205,12 @@ static void freezer_fork(struct cgroup_subsys *ss, struct task_struct *task) * No lock is needed, since the task isn't on tasklist yet, * so it can't be moved to another cgroup, which means the * freezer won't be removed and will be valid during this - * function call. + * function call. Nevertheless, apply RCU read-side critical + * section to suppress RCU lockdep false positives. */ + rcu_read_lock(); freezer = task_freezer(task); + rcu_read_unlock(); /* * The root cgroup is non-freezable, so we can skip the diff --git a/kernel/perf_event.c b/kernel/perf_event.c index 2f3fbf84215..3d1552d3c12 100644 --- a/kernel/perf_event.c +++ b/kernel/perf_event.c @@ -4897,7 +4897,7 @@ err_fput_free_put_context: err_free_put_context: if (err < 0) - kfree(event); + free_event(event); err_put_context: if (err < 0) diff --git a/kernel/sched.c b/kernel/sched.c index 6af210a7de7..3c2a54f70ff 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -323,6 +323,15 @@ static inline struct task_group *task_group(struct task_struct *p) /* Change a task's cfs_rq and parent entity if it moves across CPUs/groups */ static inline void set_task_rq(struct task_struct *p, unsigned int cpu) { + /* + * Strictly speaking this rcu_read_lock() is not needed since the + * task_group is tied to the cgroup, which in turn can never go away + * as long as there are tasks attached to it. + * + * However since task_group() uses task_subsys_state() which is an + * rcu_dereference() user, this quiets CONFIG_PROVE_RCU. + */ + rcu_read_lock(); #ifdef CONFIG_FAIR_GROUP_SCHED p->se.cfs_rq = task_group(p)->cfs_rq[cpu]; p->se.parent = task_group(p)->se[cpu]; @@ -332,6 +341,7 @@ static inline void set_task_rq(struct task_struct *p, unsigned int cpu) p->rt.rt_rq = task_group(p)->rt_rq[cpu]; p->rt.parent = task_group(p)->rt_se[cpu]; #endif + rcu_read_unlock(); } #else @@ -3780,7 +3790,7 @@ int mutex_spin_on_owner(struct mutex *lock, struct thread_info *owner) * the mutex owner just released it and exited. */ if (probe_kernel_address(&owner->cpu, cpu)) - goto out; + return 0; #else cpu = owner->cpu; #endif @@ -3790,14 +3800,14 @@ int mutex_spin_on_owner(struct mutex *lock, struct thread_info *owner) * the cpu field may no longer be valid. */ if (cpu >= nr_cpumask_bits) - goto out; + return 0; /* * We need to validate that we can do a * get_cpu() and that we have the percpu area. */ if (!cpu_online(cpu)) - goto out; + return 0; rq = cpu_rq(cpu); @@ -3816,7 +3826,7 @@ int mutex_spin_on_owner(struct mutex *lock, struct thread_info *owner) cpu_relax(); } -out: + return 1; } #endif diff --git a/security/keys/gc.c b/security/keys/gc.c index 19902319d09..a46e825cbf0 100644 --- a/security/keys/gc.c +++ b/security/keys/gc.c @@ -77,10 +77,10 @@ static bool key_gc_keyring(struct key *keyring, time_t limit) goto dont_gc; /* scan the keyring looking for dead keys */ - klist = rcu_dereference_check(keyring->payload.subscriptions, - lockdep_is_held(&key_serial_lock)); + rcu_read_lock(); + klist = rcu_dereference(keyring->payload.subscriptions); if (!klist) - goto dont_gc; + goto unlock_dont_gc; for (loop = klist->nkeys - 1; loop >= 0; loop--) { key = klist->keys[loop]; @@ -89,11 +89,14 @@ static bool key_gc_keyring(struct key *keyring, time_t limit) goto do_gc; } +unlock_dont_gc: + rcu_read_unlock(); dont_gc: kleave(" = false"); return false; do_gc: + rcu_read_unlock(); key_gc_cursor = keyring->serial; key_get(keyring); spin_unlock(&key_serial_lock); diff --git a/security/keys/user_defined.c b/security/keys/user_defined.c index 7c687d56822..e9aa0792965 100644 --- a/security/keys/user_defined.c +++ b/security/keys/user_defined.c @@ -199,7 +199,8 @@ long user_read(const struct key *key, char __user *buffer, size_t buflen) struct user_key_payload *upayload; long ret; - upayload = rcu_dereference(key->payload.data); + upayload = rcu_dereference_protected( + key->payload.data, rwsem_is_locked(&((struct key *)key)->sem)); ret = upayload->datalen; /* we can return the data as is */ diff --git a/sound/soc/txx9/txx9aclc-ac97.c b/sound/soc/txx9/txx9aclc-ac97.c index 612e18b4bf4..0ec20b68e8c 100644 --- a/sound/soc/txx9/txx9aclc-ac97.c +++ b/sound/soc/txx9/txx9aclc-ac97.c @@ -254,3 +254,4 @@ module_exit(txx9aclc_ac97_exit); MODULE_AUTHOR("Atsushi Nemoto <anemo@mba.ocn.ne.jp>"); MODULE_DESCRIPTION("TXx9 ACLC AC97 driver"); MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:txx9aclc-ac97"); diff --git a/sound/soc/txx9/txx9aclc-generic.c b/sound/soc/txx9/txx9aclc-generic.c index 3175de9a92c..95b17f731ae 100644 --- a/sound/soc/txx9/txx9aclc-generic.c +++ b/sound/soc/txx9/txx9aclc-generic.c @@ -96,3 +96,4 @@ module_exit(txx9aclc_generic_exit); MODULE_AUTHOR("Atsushi Nemoto <anemo@mba.ocn.ne.jp>"); MODULE_DESCRIPTION("Generic TXx9 ACLC ALSA SoC audio driver"); MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:txx9aclc-generic"); |