summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--net/dsa/Kconfig13
-rw-r--r--net/dsa/Makefile1
-rw-r--r--net/dsa/mv88e6131.c380
-rw-r--r--net/dsa/mv88e6xxx.c145
-rw-r--r--net/dsa/mv88e6xxx.h16
5 files changed, 555 insertions, 0 deletions
diff --git a/net/dsa/Kconfig b/net/dsa/Kconfig
index 6b68016827d..79bcd76d3f1 100644
--- a/net/dsa/Kconfig
+++ b/net/dsa/Kconfig
@@ -24,6 +24,19 @@ config NET_DSA_MV88E6XXX
bool
default n
+config NET_DSA_MV88E6XXX_NEED_PPU
+ bool
+ default n
+
+config NET_DSA_MV88E6131
+ bool "Marvell 88E6131 ethernet switch chip support"
+ select NET_DSA_MV88E6XXX
+ select NET_DSA_MV88E6XXX_NEED_PPU
+ select NET_DSA_TAG_DSA
+ ---help---
+ This enables support for the Marvell 88E6131 ethernet switch
+ chip.
+
config NET_DSA_MV88E6123_61_65
bool "Marvell 88E6123/6161/6165 ethernet switch chip support"
select NET_DSA_MV88E6XXX
diff --git a/net/dsa/Makefile b/net/dsa/Makefile
index 8b92123315b..7fb6f85a69e 100644
--- a/net/dsa/Makefile
+++ b/net/dsa/Makefile
@@ -5,6 +5,7 @@ obj-$(CONFIG_NET_DSA_TAG_EDSA) += tag_edsa.o
# switch drivers
obj-$(CONFIG_NET_DSA_MV88E6XXX) += mv88e6xxx.o
obj-$(CONFIG_NET_DSA_MV88E6123_61_65) += mv88e6123_61_65.o
+obj-$(CONFIG_NET_DSA_MV88E6131) += mv88e6131.o
# the core
obj-$(CONFIG_NET_DSA) += dsa.o slave.o
diff --git a/net/dsa/mv88e6131.c b/net/dsa/mv88e6131.c
new file mode 100644
index 00000000000..36e01eb863a
--- /dev/null
+++ b/net/dsa/mv88e6131.c
@@ -0,0 +1,380 @@
+/*
+ * net/dsa/mv88e6131.c - Marvell 88e6131 switch chip support
+ * Copyright (c) 2008 Marvell Semiconductor
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/list.h>
+#include <linux/netdevice.h>
+#include <linux/phy.h>
+#include "dsa_priv.h"
+#include "mv88e6xxx.h"
+
+static char *mv88e6131_probe(struct mii_bus *bus, int sw_addr)
+{
+ int ret;
+
+ ret = __mv88e6xxx_reg_read(bus, sw_addr, REG_PORT(0), 0x03);
+ if (ret >= 0) {
+ ret &= 0xfff0;
+ if (ret == 0x1060)
+ return "Marvell 88E6131";
+ }
+
+ return NULL;
+}
+
+static int mv88e6131_switch_reset(struct dsa_switch *ds)
+{
+ int i;
+ int ret;
+
+ /*
+ * Set all ports to the disabled state.
+ */
+ for (i = 0; i < 8; i++) {
+ ret = REG_READ(REG_PORT(i), 0x04);
+ REG_WRITE(REG_PORT(i), 0x04, ret & 0xfffc);
+ }
+
+ /*
+ * Wait for transmit queues to drain.
+ */
+ msleep(2);
+
+ /*
+ * Reset the switch.
+ */
+ REG_WRITE(REG_GLOBAL, 0x04, 0xc400);
+
+ /*
+ * Wait up to one second for reset to complete.
+ */
+ for (i = 0; i < 1000; i++) {
+ ret = REG_READ(REG_GLOBAL, 0x00);
+ if ((ret & 0xc800) == 0xc800)
+ break;
+
+ msleep(1);
+ }
+ if (i == 1000)
+ return -ETIMEDOUT;
+
+ return 0;
+}
+
+static int mv88e6131_setup_global(struct dsa_switch *ds)
+{
+ int ret;
+ int i;
+
+ /*
+ * Enable the PHY polling unit, don't discard packets with
+ * excessive collisions, use a weighted fair queueing scheme
+ * to arbitrate between packet queues, set the maximum frame
+ * size to 1632, and mask all interrupt sources.
+ */
+ REG_WRITE(REG_GLOBAL, 0x04, 0x4400);
+
+ /*
+ * Set the default address aging time to 5 minutes, and
+ * enable address learn messages to be sent to all message
+ * ports.
+ */
+ REG_WRITE(REG_GLOBAL, 0x0a, 0x0148);
+
+ /*
+ * Configure the priority mapping registers.
+ */
+ ret = mv88e6xxx_config_prio(ds);
+ if (ret < 0)
+ return ret;
+
+ /*
+ * Set the VLAN ethertype to 0x8100.
+ */
+ REG_WRITE(REG_GLOBAL, 0x19, 0x8100);
+
+ /*
+ * Disable ARP mirroring, and configure the cpu port as the
+ * port to which ingress and egress monitor frames are to be
+ * sent.
+ */
+ REG_WRITE(REG_GLOBAL, 0x1a, (ds->cpu_port * 0x1100) | 0x00f0);
+
+ /*
+ * Disable cascade port functionality, and set the switch's
+ * DSA device number to zero.
+ */
+ REG_WRITE(REG_GLOBAL, 0x1c, 0xe000);
+
+ /*
+ * Send all frames with destination addresses matching
+ * 01:80:c2:00:00:0x to the CPU port.
+ */
+ REG_WRITE(REG_GLOBAL2, 0x03, 0xffff);
+
+ /*
+ * Ignore removed tag data on doubly tagged packets, disable
+ * flow control messages, force flow control priority to the
+ * highest, and send all special multicast frames to the CPU
+ * port at the higest priority.
+ */
+ REG_WRITE(REG_GLOBAL2, 0x05, 0x00ff);
+
+ /*
+ * Map all DSA device IDs to the CPU port.
+ */
+ for (i = 0; i < 32; i++)
+ REG_WRITE(REG_GLOBAL2, 0x06, 0x8000 | (i << 8) | ds->cpu_port);
+
+ /*
+ * Clear all trunk masks.
+ */
+ for (i = 0; i < 8; i++)
+ REG_WRITE(REG_GLOBAL2, 0x07, 0x8000 | (i << 12) | 0xff);
+
+ /*
+ * Clear all trunk mappings.
+ */
+ for (i = 0; i < 16; i++)
+ REG_WRITE(REG_GLOBAL2, 0x08, 0x8000 | (i << 11));
+
+ /*
+ * Force the priority of IGMP/MLD snoop frames and ARP frames
+ * to the highest setting.
+ */
+ REG_WRITE(REG_GLOBAL2, 0x0f, 0x00ff);
+
+ return 0;
+}
+
+static int mv88e6131_setup_port(struct dsa_switch *ds, int p)
+{
+ int addr = REG_PORT(p);
+
+ /*
+ * MAC Forcing register: don't force link, speed, duplex
+ * or flow control state to any particular values.
+ */
+ REG_WRITE(addr, 0x01, 0x0003);
+
+ /*
+ * Port Control: disable Core Tag, disable Drop-on-Lock,
+ * transmit frames unmodified, disable Header mode,
+ * enable IGMP/MLD snoop, disable DoubleTag, disable VLAN
+ * tunneling, determine priority by looking at 802.1p and
+ * IP priority fields (IP prio has precedence), and set STP
+ * state to Forwarding. Finally, if this is the CPU port,
+ * additionally enable DSA tagging and forwarding of unknown
+ * unicast addresses.
+ */
+ REG_WRITE(addr, 0x04, (p == ds->cpu_port) ? 0x0537 : 0x0433);
+
+ /*
+ * Port Control 1: disable trunking. Also, if this is the
+ * CPU port, enable learn messages to be sent to this port.
+ */
+ REG_WRITE(addr, 0x05, (p == ds->cpu_port) ? 0x8000 : 0x0000);
+
+ /*
+ * Port based VLAN map: give each port its own address
+ * database, allow the CPU port to talk to each of the 'real'
+ * ports, and allow each of the 'real' ports to only talk to
+ * the CPU port.
+ */
+ REG_WRITE(addr, 0x06,
+ ((p & 0xf) << 12) |
+ ((p == ds->cpu_port) ?
+ ds->valid_port_mask :
+ (1 << ds->cpu_port)));
+
+ /*
+ * Default VLAN ID and priority: don't set a default VLAN
+ * ID, and set the default packet priority to zero.
+ */
+ REG_WRITE(addr, 0x07, 0x0000);
+
+ /*
+ * Port Control 2: don't force a good FCS, don't use
+ * VLAN-based, source address-based or destination
+ * address-based priority overrides, don't let the switch
+ * add or strip 802.1q tags, don't discard tagged or
+ * untagged frames on this port, do a destination address
+ * lookup on received packets as usual, don't send a copy
+ * of all transmitted/received frames on this port to the
+ * CPU, and configure the CPU port number. Also, if this
+ * is the CPU port, enable forwarding of unknown multicast
+ * addresses.
+ */
+ REG_WRITE(addr, 0x08,
+ ((p == ds->cpu_port) ? 0x00c0 : 0x0080) |
+ ds->cpu_port);
+
+ /*
+ * Rate Control: disable ingress rate limiting.
+ */
+ REG_WRITE(addr, 0x09, 0x0000);
+
+ /*
+ * Rate Control 2: disable egress rate limiting.
+ */
+ REG_WRITE(addr, 0x0a, 0x0000);
+
+ /*
+ * Port Association Vector: when learning source addresses
+ * of packets, add the address to the address database using
+ * a port bitmap that has only the bit for this port set and
+ * the other bits clear.
+ */
+ REG_WRITE(addr, 0x0b, 1 << p);
+
+ /*
+ * Tag Remap: use an identity 802.1p prio -> switch prio
+ * mapping.
+ */
+ REG_WRITE(addr, 0x18, 0x3210);
+
+ /*
+ * Tag Remap 2: use an identity 802.1p prio -> switch prio
+ * mapping.
+ */
+ REG_WRITE(addr, 0x19, 0x7654);
+
+ return 0;
+}
+
+static int mv88e6131_setup(struct dsa_switch *ds)
+{
+ struct mv88e6xxx_priv_state *ps = (void *)(ds + 1);
+ int i;
+ int ret;
+
+ mutex_init(&ps->smi_mutex);
+ mv88e6xxx_ppu_state_init(ds);
+ mutex_init(&ps->stats_mutex);
+
+ ret = mv88e6131_switch_reset(ds);
+ if (ret < 0)
+ return ret;
+
+ /* @@@ initialise vtu and atu */
+
+ ret = mv88e6131_setup_global(ds);
+ if (ret < 0)
+ return ret;
+
+ for (i = 0; i < 6; i++) {
+ ret = mv88e6131_setup_port(ds, i);
+ if (ret < 0)
+ return ret;
+ }
+
+ return 0;
+}
+
+static int mv88e6131_port_to_phy_addr(int port)
+{
+ if (port >= 0 && port != 3 && port <= 7)
+ return port;
+ return -1;
+}
+
+static int
+mv88e6131_phy_read(struct dsa_switch *ds, int port, int regnum)
+{
+ int addr = mv88e6131_port_to_phy_addr(port);
+ return mv88e6xxx_phy_read_ppu(ds, addr, regnum);
+}
+
+static int
+mv88e6131_phy_write(struct dsa_switch *ds,
+ int port, int regnum, u16 val)
+{
+ int addr = mv88e6131_port_to_phy_addr(port);
+ return mv88e6xxx_phy_write_ppu(ds, addr, regnum, val);
+}
+
+static struct mv88e6xxx_hw_stat mv88e6131_hw_stats[] = {
+ { "in_good_octets", 8, 0x00, },
+ { "in_bad_octets", 4, 0x02, },
+ { "in_unicast", 4, 0x04, },
+ { "in_broadcasts", 4, 0x06, },
+ { "in_multicasts", 4, 0x07, },
+ { "in_pause", 4, 0x16, },
+ { "in_undersize", 4, 0x18, },
+ { "in_fragments", 4, 0x19, },
+ { "in_oversize", 4, 0x1a, },
+ { "in_jabber", 4, 0x1b, },
+ { "in_rx_error", 4, 0x1c, },
+ { "in_fcs_error", 4, 0x1d, },
+ { "out_octets", 8, 0x0e, },
+ { "out_unicast", 4, 0x10, },
+ { "out_broadcasts", 4, 0x13, },
+ { "out_multicasts", 4, 0x12, },
+ { "out_pause", 4, 0x15, },
+ { "excessive", 4, 0x11, },
+ { "collisions", 4, 0x1e, },
+ { "deferred", 4, 0x05, },
+ { "single", 4, 0x14, },
+ { "multiple", 4, 0x17, },
+ { "out_fcs_error", 4, 0x03, },
+ { "late", 4, 0x1f, },
+ { "hist_64bytes", 4, 0x08, },
+ { "hist_65_127bytes", 4, 0x09, },
+ { "hist_128_255bytes", 4, 0x0a, },
+ { "hist_256_511bytes", 4, 0x0b, },
+ { "hist_512_1023bytes", 4, 0x0c, },
+ { "hist_1024_max_bytes", 4, 0x0d, },
+};
+
+static void
+mv88e6131_get_strings(struct dsa_switch *ds, int port, uint8_t *data)
+{
+ mv88e6xxx_get_strings(ds, ARRAY_SIZE(mv88e6131_hw_stats),
+ mv88e6131_hw_stats, port, data);
+}
+
+static void
+mv88e6131_get_ethtool_stats(struct dsa_switch *ds,
+ int port, uint64_t *data)
+{
+ mv88e6xxx_get_ethtool_stats(ds, ARRAY_SIZE(mv88e6131_hw_stats),
+ mv88e6131_hw_stats, port, data);
+}
+
+static int mv88e6131_get_sset_count(struct dsa_switch *ds)
+{
+ return ARRAY_SIZE(mv88e6131_hw_stats);
+}
+
+static struct dsa_switch_driver mv88e6131_switch_driver = {
+ .tag_protocol = __constant_htons(ETH_P_DSA),
+ .priv_size = sizeof(struct mv88e6xxx_priv_state),
+ .probe = mv88e6131_probe,
+ .setup = mv88e6131_setup,
+ .set_addr = mv88e6xxx_set_addr_direct,
+ .phy_read = mv88e6131_phy_read,
+ .phy_write = mv88e6131_phy_write,
+ .poll_link = mv88e6xxx_poll_link,
+ .get_strings = mv88e6131_get_strings,
+ .get_ethtool_stats = mv88e6131_get_ethtool_stats,
+ .get_sset_count = mv88e6131_get_sset_count,
+};
+
+int __init mv88e6131_init(void)
+{
+ register_switch_driver(&mv88e6131_switch_driver);
+ return 0;
+}
+module_init(mv88e6131_init);
+
+void __exit mv88e6131_cleanup(void)
+{
+ unregister_switch_driver(&mv88e6131_switch_driver);
+}
+module_exit(mv88e6131_cleanup);
diff --git a/net/dsa/mv88e6xxx.c b/net/dsa/mv88e6xxx.c
index 13d2328a240..aa6c609c59f 100644
--- a/net/dsa/mv88e6xxx.c
+++ b/net/dsa/mv88e6xxx.c
@@ -165,6 +165,15 @@ int mv88e6xxx_config_prio(struct dsa_switch *ds)
return 0;
}
+int mv88e6xxx_set_addr_direct(struct dsa_switch *ds, u8 *addr)
+{
+ REG_WRITE(REG_GLOBAL, 0x01, (addr[0] << 8) | addr[1]);
+ REG_WRITE(REG_GLOBAL, 0x02, (addr[2] << 8) | addr[3]);
+ REG_WRITE(REG_GLOBAL, 0x03, (addr[4] << 8) | addr[5]);
+
+ return 0;
+}
+
int mv88e6xxx_set_addr_indirect(struct dsa_switch *ds, u8 *addr)
{
int i;
@@ -207,6 +216,142 @@ int mv88e6xxx_phy_write(struct dsa_switch *ds, int addr, int regnum, u16 val)
return 0;
}
+#ifdef CONFIG_NET_DSA_MV88E6XXX_NEED_PPU
+static int mv88e6xxx_ppu_disable(struct dsa_switch *ds)
+{
+ int ret;
+ int i;
+
+ ret = REG_READ(REG_GLOBAL, 0x04);
+ REG_WRITE(REG_GLOBAL, 0x04, ret & ~0x4000);
+
+ for (i = 0; i < 1000; i++) {
+ ret = REG_READ(REG_GLOBAL, 0x00);
+ msleep(1);
+ if ((ret & 0xc000) != 0xc000)
+ return 0;
+ }
+
+ return -ETIMEDOUT;
+}
+
+static int mv88e6xxx_ppu_enable(struct dsa_switch *ds)
+{
+ int ret;
+ int i;
+
+ ret = REG_READ(REG_GLOBAL, 0x04);
+ REG_WRITE(REG_GLOBAL, 0x04, ret | 0x4000);
+
+ for (i = 0; i < 1000; i++) {
+ ret = REG_READ(REG_GLOBAL, 0x00);
+ msleep(1);
+ if ((ret & 0xc000) == 0xc000)
+ return 0;
+ }
+
+ return -ETIMEDOUT;
+}
+
+static void mv88e6xxx_ppu_reenable_work(struct work_struct *ugly)
+{
+ struct mv88e6xxx_priv_state *ps;
+
+ ps = container_of(ugly, struct mv88e6xxx_priv_state, ppu_work);
+ if (mutex_trylock(&ps->ppu_mutex)) {
+ struct dsa_switch *ds = ((struct dsa_switch *)ps) - 1;
+
+ if (mv88e6xxx_ppu_enable(ds) == 0)
+ ps->ppu_disabled = 0;
+ mutex_unlock(&ps->ppu_mutex);
+ }
+}
+
+static void mv88e6xxx_ppu_reenable_timer(unsigned long _ps)
+{
+ struct mv88e6xxx_priv_state *ps = (void *)_ps;
+
+ schedule_work(&ps->ppu_work);
+}
+
+static int mv88e6xxx_ppu_access_get(struct dsa_switch *ds)
+{
+ struct mv88e6xxx_priv_state *ps = (void *)(ds + 1);
+ int ret;
+
+ mutex_lock(&ps->ppu_mutex);
+
+ /*
+ * If the PHY polling unit is enabled, disable it so that
+ * we can access the PHY registers. If it was already
+ * disabled, cancel the timer that is going to re-enable
+ * it.
+ */
+ if (!ps->ppu_disabled) {
+ ret = mv88e6xxx_ppu_disable(ds);
+ if (ret < 0) {
+ mutex_unlock(&ps->ppu_mutex);
+ return ret;
+ }
+ ps->ppu_disabled = 1;
+ } else {
+ del_timer(&ps->ppu_timer);
+ ret = 0;
+ }
+
+ return ret;
+}
+
+static void mv88e6xxx_ppu_access_put(struct dsa_switch *ds)
+{
+ struct mv88e6xxx_priv_state *ps = (void *)(ds + 1);
+
+ /*
+ * Schedule a timer to re-enable the PHY polling unit.
+ */
+ mod_timer(&ps->ppu_timer, jiffies + msecs_to_jiffies(10));
+ mutex_unlock(&ps->ppu_mutex);
+}
+
+void mv88e6xxx_ppu_state_init(struct dsa_switch *ds)
+{
+ struct mv88e6xxx_priv_state *ps = (void *)(ds + 1);
+
+ mutex_init(&ps->ppu_mutex);
+ INIT_WORK(&ps->ppu_work, mv88e6xxx_ppu_reenable_work);
+ init_timer(&ps->ppu_timer);
+ ps->ppu_timer.data = (unsigned long)ps;
+ ps->ppu_timer.function = mv88e6xxx_ppu_reenable_timer;
+}
+
+int mv88e6xxx_phy_read_ppu(struct dsa_switch *ds, int addr, int regnum)
+{
+ int ret;
+
+ ret = mv88e6xxx_ppu_access_get(ds);
+ if (ret >= 0) {
+ ret = mv88e6xxx_reg_read(ds, addr, regnum);
+ mv88e6xxx_ppu_access_put(ds);
+ }
+
+ return ret;
+}
+
+int mv88e6xxx_phy_write_ppu(struct dsa_switch *ds, int addr,
+ int regnum, u16 val)
+{
+ int ret;
+
+ ret = mv88e6xxx_ppu_access_get(ds);
+ if (ret >= 0) {
+ ret = mv88e6xxx_reg_write(ds, addr, regnum, val);
+ mv88e6xxx_ppu_access_put(ds);
+ }
+
+ return ret;
+}
+#endif
+
void mv88e6xxx_poll_link(struct dsa_switch *ds)
{
int i;
diff --git a/net/dsa/mv88e6xxx.h b/net/dsa/mv88e6xxx.h
index a004d4d0208..eb0e0aaa9f1 100644
--- a/net/dsa/mv88e6xxx.h
+++ b/net/dsa/mv88e6xxx.h
@@ -23,6 +23,17 @@ struct mv88e6xxx_priv_state {
*/
struct mutex smi_mutex;
+#ifdef CONFIG_NET_DSA_MV88E6XXX_NEED_PPU
+ /*
+ * Handles automatic disabling and re-enabling of the PHY
+ * polling unit.
+ */
+ struct mutex ppu_mutex;
+ int ppu_disabled;
+ struct work_struct ppu_work;
+ struct timer_list ppu_timer;
+#endif
+
/*
* This mutex serialises access to the statistics unit.
* Hold this mutex over snapshot + dump sequences.
@@ -42,9 +53,14 @@ int __mv88e6xxx_reg_write(struct mii_bus *bus, int sw_addr, int addr,
int reg, u16 val);
int mv88e6xxx_reg_write(struct dsa_switch *ds, int addr, int reg, u16 val);
int mv88e6xxx_config_prio(struct dsa_switch *ds);
+int mv88e6xxx_set_addr_direct(struct dsa_switch *ds, u8 *addr);
int mv88e6xxx_set_addr_indirect(struct dsa_switch *ds, u8 *addr);
int mv88e6xxx_phy_read(struct dsa_switch *ds, int addr, int regnum);
int mv88e6xxx_phy_write(struct dsa_switch *ds, int addr, int regnum, u16 val);
+void mv88e6xxx_ppu_state_init(struct dsa_switch *ds);
+int mv88e6xxx_phy_read_ppu(struct dsa_switch *ds, int addr, int regnum);
+int mv88e6xxx_phy_write_ppu(struct dsa_switch *ds, int addr,
+ int regnum, u16 val);
void mv88e6xxx_poll_link(struct dsa_switch *ds);
void mv88e6xxx_get_strings(struct dsa_switch *ds,
int nr_stats, struct mv88e6xxx_hw_stat *stats,