diff options
| -rw-r--r-- | drivers/net/wireless/ath/ath5k/Makefile | 1 | ||||
| -rw-r--r-- | drivers/net/wireless/ath/ath5k/ani.c | 744 | ||||
| -rw-r--r-- | drivers/net/wireless/ath/ath5k/ani.h | 104 | ||||
| -rw-r--r-- | drivers/net/wireless/ath/ath5k/ath5k.h | 9 | ||||
| -rw-r--r-- | drivers/net/wireless/ath/ath5k/attach.c | 1 | ||||
| -rw-r--r-- | drivers/net/wireless/ath/ath5k/base.c | 32 | ||||
| -rw-r--r-- | drivers/net/wireless/ath/ath5k/base.h | 6 | ||||
| -rw-r--r-- | drivers/net/wireless/ath/ath5k/debug.c | 162 | ||||
| -rw-r--r-- | drivers/net/wireless/ath/ath5k/debug.h | 2 | ||||
| -rw-r--r-- | drivers/net/wireless/ath/ath5k/desc.c | 1 | ||||
| -rw-r--r-- | drivers/net/wireless/ath/ath5k/pcu.c | 1 | ||||
| -rw-r--r-- | drivers/net/wireless/ath/ath5k/reg.h | 36 |
12 files changed, 1083 insertions, 16 deletions
diff --git a/drivers/net/wireless/ath/ath5k/Makefile b/drivers/net/wireless/ath/ath5k/Makefile index 090dc6d268a..cc09595b781 100644 --- a/drivers/net/wireless/ath/ath5k/Makefile +++ b/drivers/net/wireless/ath/ath5k/Makefile @@ -12,5 +12,6 @@ ath5k-y += attach.o ath5k-y += base.o ath5k-y += led.o ath5k-y += rfkill.o +ath5k-y += ani.o ath5k-$(CONFIG_ATH5K_DEBUG) += debug.o obj-$(CONFIG_ATH5K) += ath5k.o diff --git a/drivers/net/wireless/ath/ath5k/ani.c b/drivers/net/wireless/ath/ath5k/ani.c new file mode 100644 index 00000000000..584a32859bd --- /dev/null +++ b/drivers/net/wireless/ath/ath5k/ani.c @@ -0,0 +1,744 @@ +/* + * Copyright (C) 2010 Bruno Randolf <br1@einfach.org> + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ + +#include "ath5k.h" +#include "base.h" +#include "reg.h" +#include "debug.h" +#include "ani.h" + +/** + * DOC: Basic ANI Operation + * + * Adaptive Noise Immunity (ANI) controls five noise immunity parameters + * depending on the amount of interference in the environment, increasing + * or reducing sensitivity as necessary. + * + * The parameters are: + * - "noise immunity" + * - "spur immunity" + * - "firstep level" + * - "OFDM weak signal detection" + * - "CCK weak signal detection" + * + * Basically we look at the amount of ODFM and CCK timing errors we get and then + * raise or lower immunity accordingly by setting one or more of these + * parameters. + * Newer chipsets have PHY error counters in hardware which will generate a MIB + * interrupt when they overflow. Older hardware has too enable PHY error frames + * by setting a RX flag and then count every single PHY error. When a specified + * threshold of errors has been reached we will raise immunity. + * Also we regularly check the amount of errors and lower or raise immunity as + * necessary. + */ + + +/*** ANI parameter control ***/ + +/** + * ath5k_ani_set_noise_immunity_level() - Set noise immunity level + * + * @level: level between 0 and @ATH5K_ANI_MAX_NOISE_IMM_LVL + */ +void +ath5k_ani_set_noise_immunity_level(struct ath5k_hw *ah, int level) +{ + /* TODO: + * ANI documents suggest the following five levels to use, but the HAL + * and ath9k use only use the last two levels, making this + * essentially an on/off option. There *may* be a reason for this (???), + * so i stick with the HAL version for now... + */ +#if 0 + const s8 hi[] = { -18, -18, -16, -14, -12 }; + const s8 lo[] = { -52, -56, -60, -64, -70 }; + const s8 sz[] = { -34, -41, -48, -55, -62 }; + const s8 fr[] = { -70, -72, -75, -78, -80 }; +#else + const s8 sz[] = { -55, -62 }; + const s8 lo[] = { -64, -70 }; + const s8 hi[] = { -14, -12 }; + const s8 fr[] = { -78, -80 }; +#endif + if (level < 0 || level > ARRAY_SIZE(sz)) { + ATH5K_DBG_UNLIMIT(ah->ah_sc, ATH5K_DEBUG_ANI, + "level out of range %d", level); + return; + } + + AR5K_REG_WRITE_BITS(ah, AR5K_PHY_DESIRED_SIZE, + AR5K_PHY_DESIRED_SIZE_TOT, sz[level]); + AR5K_REG_WRITE_BITS(ah, AR5K_PHY_AGCCOARSE, + AR5K_PHY_AGCCOARSE_LO, lo[level]); + AR5K_REG_WRITE_BITS(ah, AR5K_PHY_AGCCOARSE, + AR5K_PHY_AGCCOARSE_HI, hi[level]); + AR5K_REG_WRITE_BITS(ah, AR5K_PHY_SIG, + AR5K_PHY_SIG_FIRPWR, fr[level]); + + ah->ah_sc->ani_state.noise_imm_level = level; + ATH5K_DBG_UNLIMIT(ah->ah_sc, ATH5K_DEBUG_ANI, "new level %d", level); +} + + +/** + * ath5k_ani_set_spur_immunity_level() - Set spur immunity level + * + * @level: level between 0 and @max_spur_level (the maximum level is dependent + * on the chip revision). + */ +void +ath5k_ani_set_spur_immunity_level(struct ath5k_hw *ah, int level) +{ + const int val[] = { 2, 4, 6, 8, 10, 12, 14, 16 }; + + if (level < 0 || level > ARRAY_SIZE(val) || + level > ah->ah_sc->ani_state.max_spur_level) { + ATH5K_DBG_UNLIMIT(ah->ah_sc, ATH5K_DEBUG_ANI, + "level out of range %d", level); + return; + } + + AR5K_REG_WRITE_BITS(ah, AR5K_PHY_OFDM_SELFCORR, + AR5K_PHY_OFDM_SELFCORR_CYPWR_THR1, val[level]); + + ah->ah_sc->ani_state.spur_level = level; + ATH5K_DBG_UNLIMIT(ah->ah_sc, ATH5K_DEBUG_ANI, "new level %d", level); +} + + +/** + * ath5k_ani_set_firstep_level() - Set "firstep" level + * + * @level: level between 0 and @ATH5K_ANI_MAX_FIRSTEP_LVL + */ +void +ath5k_ani_set_firstep_level(struct ath5k_hw *ah, int level) +{ + const int val[] = { 0, 4, 8 }; + + if (level < 0 || level > ARRAY_SIZE(val)) { + ATH5K_DBG_UNLIMIT(ah->ah_sc, ATH5K_DEBUG_ANI, + "level out of range %d", level); + return; + } + + AR5K_REG_WRITE_BITS(ah, AR5K_PHY_SIG, + AR5K_PHY_SIG_FIRSTEP, val[level]); + + ah->ah_sc->ani_state.firstep_level = level; + ATH5K_DBG_UNLIMIT(ah->ah_sc, ATH5K_DEBUG_ANI, "new level %d", level); +} + + +/** + * ath5k_ani_set_ofdm_weak_signal_detection() - Control OFDM weak signal + * detection + * + * @on: turn on or off + */ +void +ath5k_ani_set_ofdm_weak_signal_detection(struct ath5k_hw *ah, bool on) +{ + const int m1l[] = { 127, 50 }; + const int m2l[] = { 127, 40 }; + const int m1[] = { 127, 0x4d }; + const int m2[] = { 127, 0x40 }; + const int m2cnt[] = { 31, 16 }; + const int m2lcnt[] = { 63, 48 }; + + AR5K_REG_WRITE_BITS(ah, AR5K_PHY_WEAK_OFDM_LOW_THR, + AR5K_PHY_WEAK_OFDM_LOW_THR_M1, m1l[on]); + AR5K_REG_WRITE_BITS(ah, AR5K_PHY_WEAK_OFDM_LOW_THR, + AR5K_PHY_WEAK_OFDM_LOW_THR_M2, m2l[on]); + AR5K_REG_WRITE_BITS(ah, AR5K_PHY_WEAK_OFDM_HIGH_THR, + AR5K_PHY_WEAK_OFDM_HIGH_THR_M1, m1[on]); + AR5K_REG_WRITE_BITS(ah, AR5K_PHY_WEAK_OFDM_HIGH_THR, + AR5K_PHY_WEAK_OFDM_HIGH_THR_M2, m2[on]); + AR5K_REG_WRITE_BITS(ah, AR5K_PHY_WEAK_OFDM_HIGH_THR, + AR5K_PHY_WEAK_OFDM_HIGH_THR_M2_COUNT, m2cnt[on]); + AR5K_REG_WRITE_BITS(ah, AR5K_PHY_WEAK_OFDM_LOW_THR, + AR5K_PHY_WEAK_OFDM_LOW_THR_M2_COUNT, m2lcnt[on]); + + if (on) + AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_WEAK_OFDM_LOW_THR, + AR5K_PHY_WEAK_OFDM_LOW_THR_SELFCOR_EN); + else + AR5K_REG_DISABLE_BITS(ah, AR5K_PHY_WEAK_OFDM_LOW_THR, + AR5K_PHY_WEAK_OFDM_LOW_THR_SELFCOR_EN); + + ah->ah_sc->ani_state.ofdm_weak_sig = on; + ATH5K_DBG_UNLIMIT(ah->ah_sc, ATH5K_DEBUG_ANI, "turned %s", + on ? "on" : "off"); +} + + +/** + * ath5k_ani_set_cck_weak_signal_detection() - control CCK weak signal detection + * + * @on: turn on or off + */ +void +ath5k_ani_set_cck_weak_signal_detection(struct ath5k_hw *ah, bool on) +{ + const int val[] = { 8, 6 }; + AR5K_REG_WRITE_BITS(ah, AR5K_PHY_CCK_CROSSCORR, + AR5K_PHY_CCK_CROSSCORR_WEAK_SIG_THR, val[on]); + ah->ah_sc->ani_state.cck_weak_sig = on; + ATH5K_DBG_UNLIMIT(ah->ah_sc, ATH5K_DEBUG_ANI, "turned %s", + on ? "on" : "off"); +} + + +/*** ANI algorithm ***/ + +/** + * ath5k_ani_raise_immunity() - Increase noise immunity + * + * @ofdm_trigger: If this is true we are called because of too many OFDM errors, + * the algorithm will tune more parameters then. + * + * Try to raise noise immunity (=decrease sensitivity) in several steps + * depending on the average RSSI of the beacons we received. + */ +static void +ath5k_ani_raise_immunity(struct ath5k_hw *ah, struct ath5k_ani_state *as, + bool ofdm_trigger) +{ + int rssi = ah->ah_beacon_rssi_avg.avg; + + ATH5K_DBG_UNLIMIT(ah->ah_sc, ATH5K_DEBUG_ANI, "raise immunity (%s)", + ofdm_trigger ? "ODFM" : "CCK"); + + /* first: raise noise immunity */ + if (as->noise_imm_level < ATH5K_ANI_MAX_NOISE_IMM_LVL) { + ath5k_ani_set_noise_immunity_level(ah, as->noise_imm_level + 1); + return; + } + + /* only OFDM: raise spur immunity level */ + if (ofdm_trigger && + as->spur_level < ah->ah_sc->ani_state.max_spur_level) { + ath5k_ani_set_spur_immunity_level(ah, as->spur_level + 1); + return; + } + + /* AP mode */ + if (ah->ah_sc->opmode == NL80211_IFTYPE_AP) { + if (as->firstep_level < ATH5K_ANI_MAX_FIRSTEP_LVL) + ath5k_ani_set_firstep_level(ah, as->firstep_level + 1); + return; + } + + /* STA and IBSS mode */ + + /* TODO: for IBSS mode it would be better to keep a beacon RSSI average + * per each neighbour node and use the minimum of these, to make sure we + * don't shut out a remote node by raising immunity too high. */ + + if (rssi > ATH5K_ANI_RSSI_THR_HIGH) { + ATH5K_DBG_UNLIMIT(ah->ah_sc, ATH5K_DEBUG_ANI, + "beacon RSSI high"); + /* only OFDM: beacon RSSI is high, we can disable ODFM weak + * signal detection */ + if (ofdm_trigger && as->ofdm_weak_sig == true) { + ath5k_ani_set_ofdm_weak_signal_detection(ah, false); + ath5k_ani_set_spur_immunity_level(ah, 0); + return; + } + /* as a last resort or CCK: raise firstep level */ + if (as->firstep_level < ATH5K_ANI_MAX_FIRSTEP_LVL) { + ath5k_ani_set_firstep_level(ah, as->firstep_level + 1); + return; + } + } else if (rssi > ATH5K_ANI_RSSI_THR_LOW) { + /* beacon RSSI in mid range, we need OFDM weak signal detect, + * but can raise firstep level */ + ATH5K_DBG_UNLIMIT(ah->ah_sc, ATH5K_DEBUG_ANI, + "beacon RSSI mid"); + if (ofdm_trigger && as->ofdm_weak_sig == false) + ath5k_ani_set_ofdm_weak_signal_detection(ah, true); + if (as->firstep_level < ATH5K_ANI_MAX_FIRSTEP_LVL) + ath5k_ani_set_firstep_level(ah, as->firstep_level + 1); + return; + } else if (ah->ah_current_channel->band == IEEE80211_BAND_2GHZ) { + /* beacon RSSI is low. in B/G mode turn of OFDM weak signal + * detect and zero firstep level to maximize CCK sensitivity */ + ATH5K_DBG_UNLIMIT(ah->ah_sc, ATH5K_DEBUG_ANI, + "beacon RSSI low, 2GHz"); + if (ofdm_trigger && as->ofdm_weak_sig == true) + ath5k_ani_set_ofdm_weak_signal_detection(ah, false); + if (as->firstep_level > 0) + ath5k_ani_set_firstep_level(ah, 0); + return; + } + + /* TODO: why not?: + if (as->cck_weak_sig == true) { + ath5k_ani_set_cck_weak_signal_detection(ah, false); + } + */ +} + + +/** + * ath5k_ani_lower_immunity() - Decrease noise immunity + * + * Try to lower noise immunity (=increase sensitivity) in several steps + * depending on the average RSSI of the beacons we received. + */ +static void +ath5k_ani_lower_immunity(struct ath5k_hw *ah, struct ath5k_ani_state *as) +{ + int rssi = ah->ah_beacon_rssi_avg.avg; + + ATH5K_DBG_UNLIMIT(ah->ah_sc, ATH5K_DEBUG_ANI, "lower immunity"); + + if (ah->ah_sc->opmode == NL80211_IFTYPE_AP) { + /* AP mode */ + if (as->firstep_level > 0) { + ath5k_ani_set_firstep_level(ah, as->firstep_level - 1); + return; + } + } else { + /* STA and IBSS mode (see TODO above) */ + if (rssi > ATH5K_ANI_RSSI_THR_HIGH) { + /* beacon signal is high, leave OFDM weak signal + * detection off or it may oscillate + * TODO: who said it's off??? */ + } else if (rssi > ATH5K_ANI_RSSI_THR_LOW) { + /* beacon RSSI is mid-range: turn on ODFM weak signal + * detection and next, lower firstep level */ + if (as->ofdm_weak_sig == false) { + ath5k_ani_set_ofdm_weak_signal_detection(ah, + true); + return; + } + if (as->firstep_level > 0) { + ath5k_ani_set_firstep_level(ah, + as->firstep_level - 1); + return; + } + } else { + /* beacon signal is low: only reduce firstep level */ + if (as->firstep_level > 0) { + ath5k_ani_set_firstep_level(ah, + as->firstep_level - 1); + return; + } + } + } + + /* all modes */ + if (as->spur_level > 0) { + ath5k_ani_set_spur_immunity_level(ah, as->spur_level - 1); + return; + } + + /* finally, reduce noise immunity */ + if (as->noise_imm_level > 0) { + ath5k_ani_set_noise_immunity_level(ah, as->noise_imm_level - 1); + return; + } +} + + +/** + * ath5k_hw_ani_get_listen_time() - Calculate time spent listening + * + * Return an approximation of the time spent "listening" in milliseconds (ms) + * since the last call of this function by deducting the cycles spent + * transmitting and receiving from the total cycle count. + * Save profile count values for debugging/statistics and because we might want + * to use them later. + * + * We assume no one else clears these registers! + */ +static int +ath5k_hw_ani_get_listen_time(struct ath5k_hw *ah, struct ath5k_ani_state *as) +{ + int listen; + + /* freeze */ + ath5k_hw_reg_write(ah, AR5K_MIBC_FMC, AR5K_MIBC); + /* read */ + as->pfc_cycles = ath5k_hw_reg_read(ah, AR5K_PROFCNT_CYCLE); + as->pfc_busy = ath5k_hw_reg_read(ah, AR5K_PROFCNT_RXCLR); + as->pfc_tx = ath5k_hw_reg_read(ah, AR5K_PROFCNT_TX); + as->pfc_rx = ath5k_hw_reg_read(ah, AR5K_PROFCNT_RX); + /* clear */ + ath5k_hw_reg_write(ah, 0, AR5K_PROFCNT_TX); + ath5k_hw_reg_write(ah, 0, AR5K_PROFCNT_RX); + ath5k_hw_reg_write(ah, 0, AR5K_PROFCNT_RXCLR); + ath5k_hw_reg_write(ah, 0, AR5K_PROFCNT_CYCLE); + /* un-freeze */ + ath5k_hw_reg_write(ah, 0, AR5K_MIBC); + + /* TODO: where does 44000 come from? (11g clock rate?) */ + listen = (as->pfc_cycles - as->pfc_rx - as->pfc_tx) / 44000; + + if (as->pfc_cycles == 0 || listen < 0) + return 0; + return listen; +} + + +/** + * ath5k_ani_save_and_clear_phy_errors() - Clear and save PHY error counters + * + * Clear the PHY error counters as soon as possible, since this might be called + * from a MIB interrupt and we want to make sure we don't get interrupted again. + * Add the count of CCK and OFDM errors to our internal state, so it can be used + * by the algorithm later. + * + * Will be called from interrupt and tasklet context. + * Returns 0 if both counters are zero. + */ +static int +ath5k_ani_save_and_clear_phy_errors(struct ath5k_hw *ah, + struct ath5k_ani_state *as) +{ + unsigned int ofdm_err, cck_err; + + if (!ah->ah_capabilities.cap_has_phyerr_counters) + return 0; + + ofdm_err = ath5k_hw_reg_read(ah, AR5K_PHYERR_CNT1); + cck_err = ath5k_hw_reg_read(ah, AR5K_PHYERR_CNT2); + + /* reset counters first, we might be in a hurry (interrupt) */ + ath5k_hw_reg_write(ah, ATH5K_PHYERR_CNT_MAX - ATH5K_ANI_OFDM_TRIG_HIGH, + AR5K_PHYERR_CNT1); + ath5k_hw_reg_write(ah, ATH5K_PHYERR_CNT_MAX - ATH5K_ANI_CCK_TRIG_HIGH, + AR5K_PHYERR_CNT2); + + ofdm_err = ATH5K_ANI_OFDM_TRIG_HIGH - (ATH5K_PHYERR_CNT_MAX - ofdm_err); + cck_err = ATH5K_ANI_CCK_TRIG_HIGH - (ATH5K_PHYERR_CNT_MAX - cck_err); + + /* sometimes both can be zero, especially when there is a superfluous + * second interrupt. detect that here and return an error. */ + if (ofdm_err <= 0 && cck_err <= 0) + return 0; + + /* avoid negative values should one of the registers overflow */ + if (ofdm_err > 0) { + as->ofdm_errors += ofdm_err; + as->sum_ofdm_errors += ofdm_err; + } + if (cck_err > 0) { + as->cck_errors += cck_err; + as->sum_cck_errors += cck_err; + } + return 1; +} + + +/** + * ath5k_ani_period_restart() - Restart ANI period + * + * Just reset counters, so they are clear for the next "ani period". + */ +static void +ath5k_ani_period_restart(struct ath5k_hw *ah, struct ath5k_ani_state *as) +{ + /* keep last values for debugging */ + as->last_ofdm_errors = as->ofdm_errors; + as->last_cck_errors = as->cck_errors; + as->last_listen = as->listen_time; + + as->ofdm_errors = 0; + as->cck_errors = 0; + as->listen_time = 0; +} + + +/** + * ath5k_ani_calibration() - The main ANI calibration function + * + * We count OFDM and CCK errors relative to the time where we did not send or + * receive ("listen" time) and raise or lower immunity accordingly. + * This is called regularly (every second) from the calibration timer, but also + * when an error threshold has been reached. + * + * In order to synchronize access from different contexts, this should be + * called only indirectly by scheduling the ANI tasklet! + */ +void +ath5k_ani_calibration(struct ath5k_hw *ah) +{ + struct ath5k_ani_state *as = &ah->ah_sc->ani_state; + int listen, ofdm_high, ofdm_low, cck_high, cck_low; + + if (as->ani_mode != ATH5K_ANI_MODE_AUTO) + return; + + /* get listen time since last call and add it to the counter because we + * might not have restarted the "ani period" last time */ + listen = ath5k_hw_ani_get_listen_time(ah, as); + as->listen_time += listen; + + ath5k_ani_save_and_clear_phy_errors(ah, as); + + ofdm_high = as->listen_time * ATH5K_ANI_OFDM_TRIG_HIGH / 1000; + cck_high = as->listen_time * ATH5K_ANI_CCK_TRIG_HIGH / 1000; + ofdm_low = as->listen_time * ATH5K_ANI_OFDM_TRIG_LOW / 1000; + cck_low = as->listen_time * ATH5K_ANI_CCK_TRIG_LOW / 1000; + + ATH5K_DBG_UNLIMIT(ah->ah_sc, ATH5K_DEBUG_ANI, + "listen %d (now %d)", as->listen_time, listen); + ATH5K_DBG_UNLIMIT(ah->ah_sc, ATH5K_DEBUG_ANI, + "check high ofdm %d/%d cck %d/%d", + as->ofdm_errors, ofdm_high, as->cck_errors, cck_high); + + if (as->ofdm_errors > ofdm_high || as->cck_errors > cck_high) { + /* too many PHY errors - we have to raise immunity */ + bool ofdm_flag = as->ofdm_errors > ofdm_high ? true : false; + ath5k_ani_raise_immunity(ah, as, ofdm_flag); + ath5k_ani_period_restart(ah, as); + + } else if (as->listen_time > 5 * ATH5K_ANI_LISTEN_PERIOD) { + /* If more than 5 (TODO: why 5?) periods have passed and we got + * relatively little errors we can try to lower immunity */ + ATH5K_DBG_UNLIMIT(ah->ah_sc, ATH5K_DEBUG_ANI, + "check low ofdm %d/%d cck %d/%d", + as->ofdm_errors, ofdm_low, as->cck_errors, cck_low); + + if (as->ofdm_errors <= ofdm_low && as->cck_errors <= cck_low) + ath5k_ani_lower_immunity(ah, as); + + ath5k_ani_period_restart(ah, as); + } +} + + +/*** INTERRUPT HANDLER ***/ + +/** + * ath5k_ani_mib_intr() - Interrupt handler for ANI MIB counters + * + * Just read & reset the registers quickly, so they don't generate more + * interrupts, save the counters and schedule the tasklet to decide whether + * to raise immunity or not. + * + * We just need to handle PHY error counters, ath5k_hw_update_mib_counters() + * should take care of all "normal" MIB interrupts. + */ +void +ath5k_ani_mib_intr(struct ath5k_hw *ah) +{ + struct ath5k_ani_state *as = &ah->ah_sc->ani_state; + + /* nothing to do here if HW does not have PHY error counters - they + * can't be the reason for the MIB interrupt then */ + if (!ah->ah_capabilities.cap_has_phyerr_counters) + return; + + /* not in use but clear anyways */ + ath5k_hw_reg_write(ah, 0, AR5K_OFDM_FIL_CNT); + ath5k_hw_reg_write(ah, 0, AR5K_CCK_FIL_CNT); + + if (ah->ah_sc->ani_state.ani_mode != ATH5K_ANI_MODE_AUTO) + return; + + /* if one of the errors triggered, we can get a superfluous second + * interrupt, even though we have already reset the register. the + * function detects that so we can return early */ + if (ath5k_ani_save_and_clear_phy_errors(ah, as) == 0) + return; + + if (as->ofdm_errors > ATH5K_ANI_OFDM_TRIG_HIGH || + as->cck_errors > ATH5K_ANI_CCK_TRIG_HIGH) + tasklet_schedule(&ah->ah_sc->ani_tasklet); +} + + +/** + * ath5k_ani_phy_error_report() - Used by older HW to report PHY errors + * + * This is used by hardware without PHY error counters to report PHY errors + * on a frame-by-frame basis, instead of the interrupt. + */ +void +ath5k_ani_phy_error_report(struct ath5k_hw *ah, + enum ath5k_phy_error_code phyerr) +{ + struct ath5k_ani_state *as = &ah->ah_sc->ani_state; + + if (phyerr == AR5K_RX_PHY_ERROR_OFDM_TIMING) { + as->ofdm_errors++; + if (as->ofdm_errors > ATH5K_ANI_OFDM_TRIG_HIGH) + tasklet_schedule(&ah->ah_sc->ani_tasklet); + } else if (phyerr == AR5K_RX_PHY_ERROR_CCK_TIMING) { + as->cck_errors++; + if (as->cck_errors > ATH5K_ANI_CCK_TRIG_HIGH) + tasklet_schedule(&ah->ah_sc->ani_tasklet); + } +} + + +/*** INIT ***/ + +/** + * ath5k_enable_phy_err_counters() - Enable PHY error counters + * + * Enable PHY error counters for OFDM and CCK timing errors. + */ +static void +ath5k_enable_phy_err_counters(struct ath5k_hw *ah) +{ + ath5k_hw_reg_write(ah, ATH5K_PHYERR_CNT_MAX - ATH5K_ANI_OFDM_TRIG_HIGH, + AR5K_PHYERR_CNT1); + ath5k_hw_reg_write(ah, ATH5K_PHYERR_CNT_MAX - ATH5K_ANI_CCK_TRIG_HIGH, + AR5K_PHYERR_CNT2); + ath5k_hw_reg_write(ah, AR5K_PHY_ERR_FIL_OFDM, AR5K_PHYERR_CNT1_MASK); + ath5k_hw_reg_write(ah, AR5K_PHY_ERR_FIL_CCK, AR5K_PHYERR_CNT2_MASK); + + /* not in use */ + ath5k_hw_reg_write(ah, 0, AR5K_OFDM_FIL_CNT); + ath5k_hw_reg_write(ah, 0, AR5K_CCK_FIL_CNT); +} + + +/** + * ath5k_disable_phy_err_counters() - Disable PHY error counters + * + * Disable PHY error counters for OFDM and CCK timing errors. + */ +static void +ath5k_disable_phy_err_counters(struct ath5k_hw *ah) +{ + ath5k_hw_reg_write(ah, 0, AR5K_PHYERR_CNT1); + ath5k_hw_reg_write(ah, 0, AR5K_PHYERR_CNT2); + ath5k_hw_reg_write(ah, 0, AR5K_PHYERR_CNT1_MASK); + ath5k_hw_reg_write(ah, 0, AR5K_PHYERR_CNT2_MASK); + + /* not in use */ + ath5k_hw_reg_write(ah, 0, AR5K_OFDM_FIL_CNT); + ath5k_hw_reg_write(ah, 0, AR5K_CCK_FIL_CNT); +} + + +/** + * ath5k_ani_init() - Initialize ANI + * @mode: Which mode to use (auto, manual high, manual low, off) + * + * Initialize ANI according to mode. + */ +void +ath5k_ani_init(struct ath5k_hw *ah, enum ath5k_ani_mode mode) +{ + /* ANI is only possible on 5212 and newer */ + if (ah->ah_version < AR5K_AR5212) + return; + + /* clear old state information */ + memset(&ah->ah_sc->ani_state, 0, sizeof(ah->ah_sc->ani_state)); + + /* older hardware has more spur levels than newer */ + if (ah->ah_mac_srev < AR5K_SREV_AR2414) + ah->ah_sc->ani_state.max_spur_level = 7; + else + ah->ah_sc->ani_state.max_spur_level = 2; + + /* initial values for our ani parameters */ + if (mode == ATH5K_ANI_MODE_OFF) { + ATH5K_DBG_UNLIMIT(ah->ah_sc, ATH5K_DEBUG_ANI, "ANI off\n"); + } else if (mode == ATH5K_ANI_MODE_MANUAL_LOW) { + ATH5K_DBG_UNLIMIT(ah->ah_sc, ATH5K_DEBUG_ANI, + "ANI manual low -> high sensitivity\n"); + ath5k_ani_set_noise_immunity_level(ah, 0); + ath5k_ani_set_spur_immunity_level(ah, 0); + ath5k_ani_set_firstep_level(ah, 0); + ath5k_ani_set_ofdm_weak_signal_detection(ah, true); + ath5k_ani_set_cck_weak_signal_detection(ah, true); + } else if (mode == ATH5K_ANI_MODE_MANUAL_HIGH) { + ATH5K_DBG_UNLIMIT(ah->ah_sc, ATH5K_DEBUG_ANI, + "ANI manual high -> low sensitivity\n"); + ath5k_ani_set_noise_immunity_level(ah, + ATH5K_ANI_MAX_NOISE_IMM_LVL); + ath5k_ani_set_spur_immunity_level(ah, + ah->ah_sc->ani_state.max_spur_level); + ath5k_ani_set_firstep_level(ah, ATH5K_ANI_MAX_FIRSTEP_LVL); + ath5k_ani_set_ofdm_weak_signal_detection(ah, false); + ath5k_ani_set_cck_weak_signal_detection(ah, false); + } else if (mode == ATH5K_ANI_MODE_AUTO) { + ATH5K_DBG_UNLIMIT(ah->ah_sc, ATH5K_DEBUG_ANI, "ANI auto\n"); + ath5k_ani_set_noise_immunity_level(ah, 0); + ath5k_ani_set_spur_immunity_level(ah, 0); + ath5k_ani_set_firstep_level(ah, 0); + ath5k_ani_set_ofdm_weak_signal_detection(ah, true); + ath5k_ani_set_cck_weak_signal_detection(ah, false); + } + + /* newer hardware has PHY error counter registers which we can use to + * get OFDM and CCK error counts. older hardware has to set rxfilter and + * report every single PHY error by calling ath5k_ani_phy_error_report() + */ + if (mode == ATH5K_ANI_MODE_AUTO) { + if (ah->ah_capabilities.cap_has_phyerr_counters) + ath5k_enable_phy_err_counters(ah); + else + ath5k_hw_set_rx_filter(ah, ath5k_hw_get_rx_filter(ah) | + AR5K_RX_FILTER_PHYERR); + } else { + if (ah->ah_capabilities.cap_has_phyerr_counters) + ath5k_disable_phy_err_counters(ah); + else + ath5k_hw_set_rx_filter(ah, ath5k_hw_get_rx_filter(ah) & + ~AR5K_RX_FILTER_PHYERR); + } + + ah->ah_sc->ani_state.ani_mode = mode; +} + + +/*** DEBUG ***/ + +#ifdef CONFIG_ATH5K_DEBUG + +void +ath5k_ani_print_counters(struct ath5k_hw *ah) +{ + /* clears too */ + printk(KERN_NOTICE "ACK fail\t%d\n", + ath5k_hw_reg_read(ah, AR5K_ACK_FAIL)); + printk(KERN_NOTICE "RTS fail\t%d\n", + ath5k_hw_reg_read(ah, AR5K_RTS_FAIL)); + printk(KERN_NOTICE "RTS success\t%d\n", + ath5k_hw_reg_read(ah, AR5K_RTS_OK)); + printk(KERN_NOTICE "FCS error\t%d\n", + ath5k_hw_reg_read(ah, AR5K_FCS_FAIL)); + + /* no clear */ + printk(KERN_NOTICE "tx\t%d\n", + ath5k_hw_reg_read(ah, AR5K_PROFCNT_TX)); + printk(KERN_NOTICE "rx\t%d\n", + ath5k_hw_reg_read(ah, AR5K_PROFCNT_RX)); + printk(KERN_NOTICE "busy\t%d\n", + ath5k_hw_reg_read(ah, AR5K_PROFCNT_RXCLR)); + printk(KERN_NOTICE "cycles\t%d\n", + ath5k_hw_reg_read(ah, AR5K_PROFCNT_CYCLE)); + + printk(KERN_NOTICE "AR5K_PHYERR_CNT1\t%d\n", + ath5k_hw_reg_read(ah, AR5K_PHYERR_CNT1)); + printk(KERN_NOTICE "AR5K_PHYERR_CNT2\t%d\n", + ath5k_hw_reg_read(ah, AR5K_PHYERR_CNT2)); + printk(KERN_NOTICE "AR5K_OFDM_FIL_CNT\t%d\n", + ath5k_hw_reg_read(ah, AR5K_OFDM_FIL_CNT)); + printk(KERN_NOTICE "AR5K_CCK_FIL_CNT\t%d\n", + ath5k_hw_reg_read(ah, AR5K_CCK_FIL_CNT)); +} + +#endif diff --git a/drivers/net/wireless/ath/ath5k/ani.h b/drivers/net/wireless/ath/ath5k/ani.h new file mode 100644 index 00000000000..55cf26d8522 --- /dev/null +++ b/drivers/net/wireless/ath/ath5k/ani.h @@ -0,0 +1,104 @@ +/* + * Copyright (C) 2010 Bruno Randolf <br1@einfach.org> + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ +#ifndef ANI_H +#define ANI_H + +/* these thresholds are relative to the ATH5K_ANI_LISTEN_PERIOD */ +#define ATH5K_ANI_LISTEN_PERIOD 100 +#define ATH5K_ANI_OFDM_TRIG_HIGH 500 +#define ATH5K_ANI_OFDM_TRIG_LOW 200 +#define ATH5K_ANI_CCK_TRIG_HIGH 200 +#define ATH5K_ANI_CCK_TRIG_LOW 100 + +/* average beacon RSSI thresholds */ +#define ATH5K_ANI_RSSI_THR_HIGH 40 +#define ATH5K_ANI_RSSI_THR_LOW 7 + +/* maximum availabe levels */ +#define ATH5K_ANI_MAX_FIRSTEP_LVL 2 +#define ATH5K_ANI_MAX_NOISE_IMM_LVL 1 + + +/** + * enum ath5k_ani_mode - mode for ANI / noise sensitivity + * + * @ATH5K_ANI_MODE_OFF: Turn ANI off. This can be useful to just stop the ANI + * algorithm after it has been on auto mode. + * ATH5K_ANI_MODE_MANUAL_LOW: Manually set all immunity parameters to low, + * maximizing sensitivity. ANI will not run. + * ATH5K_ANI_MODE_MANUAL_HIGH: Manually set all immunity parameters to high, + * minimizing sensitivity. ANI will not run. + * ATH5K_ANI_MODE_AUTO: Automatically control immunity parameters based on the + * amount of OFDM and CCK frame errors (default). + */ +enum ath5k_ani_mode { + ATH5K_ANI_MODE_OFF = 0, + ATH5K_ANI_MODE_MANUAL_LOW = 1, + ATH5K_ANI_MODE_MANUAL_HIGH = 2, + ATH5K_ANI_MODE_AUTO = 3 +}; + + +/** + * struct ath5k_ani_state - ANI state and associated counters + * + * @max_spur_level: the maximum spur level is chip dependent + */ +struct ath5k_ani_state { + enum ath5k_ani_mode ani_mode; + + /* state */ + int noise_imm_level; + int spur_level; + int firstep_level; + bool ofdm_weak_sig; + bool cck_weak_sig; + + int max_spur_level; + + /* used by the algorithm */ + unsigned int listen_time; + unsigned int ofdm_errors; + unsigned int cck_errors; + + /* debug/statistics only: numbers from last ANI calibration */ + unsigned int pfc_tx; + unsigned int pfc_rx; + unsigned int pfc_busy; + unsigned int pfc_cycles; + unsigned int last_listen; + unsigned int last_ofdm_errors; + unsigned int last_cck_errors; + unsigned int sum_ofdm_errors; + unsigned int sum_cck_errors; +}; + +void ath5k_ani_init(struct ath5k_hw *ah, enum ath5k_ani_mode mode); +void ath5k_ani_mib_intr(struct ath5k_hw *ah); +void ath5k_ani_calibration(struct ath5k_hw *ah); +void ath5k_ani_phy_error_report(struct ath5k_hw *ah, + enum ath5k_phy_error_code phyerr); + +/* for manual control */ +void ath5k_ani_set_noise_immunity_level(struct ath5k_hw *ah, int level); +void ath5k_ani_set_spur_immunity_level(struct ath5k_hw *ah, int level); +void ath5k_ani_set_firstep_level(struct ath5k_hw *ah, int level); +void ath5k_ani_set_ofdm_weak_signal_detection(struct ath5k_hw *ah, bool on); +void ath5k_ani_set_cck_weak_signal_detection(struct ath5k_hw *ah, bool on); + +void ath5k_ani_print_counters(struct ath5k_hw *ah); + +#endif /* ANI_H */ diff --git a/drivers/net/wireless/ath/ath5k/ath5k.h b/drivers/net/wireless/ath/ath5k/ath5k.h index f578c1ed7f8..2785946f659 100644 --- a/drivers/net/wireless/ath/ath5k/ath5k.h +++ b/drivers/net/wireless/ath/ath5k/ath5k.h @@ -203,6 +203,7 @@ #define AR5K_TUNE_DEFAULT_TXPOWER 25 #define AR5K_TUNE_TPC_TXPOWER false #define ATH5K_TUNE_CALIBRATION_INTERVAL_FULL 10000 /* 10 sec */ +#define ATH5K_TUNE_CALIBRATION_INTERVAL_ANI 1000 /* 1 sec */ #define AR5K_INIT_CARR_SENSE_EN 1 @@ -800,9 +801,9 @@ struct ath5k_athchan_2ghz { * @AR5K_INT_TXURN: received when we should increase the TX trigger threshold * We currently do increments on interrupt by * (AR5K_TUNE_MAX_TX_FIFO_THRES - current_trigger_level) / 2 - * @AR5K_INT_MIB: Indicates the Management Information Base counters should be - * checked. We should do this with ath5k_hw_update_mib_counters() but - * it seems we should also then do some noise immunity work. + * @AR5K_INT_MIB: Indicates the either Management Information Base counters or + * one of the PHY error counters reached the maximum value and should be + * read and cleared. * @AR5K_INT_RXPHY: RX PHY Error * @AR5K_INT_RXKCM: RX Key cache miss * @AR5K_INT_SWBA: SoftWare Beacon Alert - indicates its time to send a @@ -894,6 +895,7 @@ enum ath5k_int { enum ath5k_calibration_mask { AR5K_CALIBRATION_FULL = 0x01, AR5K_CALIBRATION_SHORT = 0x02, + AR5K_CALIBRATION_ANI = 0x04, }; /* @@ -1115,6 +1117,7 @@ struct ath5k_hw { /* Calibration timestamp */ unsigned long ah_cal_next_full; + unsigned long ah_cal_next_ani; /* Calibration mask */ u8 ah_cal_mask; diff --git a/drivers/net/wireless/ath/ath5k/attach.c b/drivers/net/wireless/ath/ath5k/attach.c index f80d3d52c53..dcf7c30f813 100644 --- a/drivers/net/wireless/ath/ath5k/attach.c +++ b/drivers/net/wireless/ath/ath5k/attach.c @@ -124,6 +124,7 @@ int ath5k_hw_attach(struct ath5k_softc *sc) ah->ah_software_retry = false; ah->ah_ant_mode = AR5K_ANTMODE_DEFAULT; ah->ah_noise_floor = -95; /* until first NF calibration is run */ + sc->ani_state.ani_mode = ATH5K_ANI_MODE_AUTO; /* * Find the mac version diff --git a/drivers/net/wireless/ath/ath5k/base.c b/drivers/net/wireless/ath/ath5k/base.c index a1c0dcb4926..c085a06f1e0 100644 --- a/drivers/net/wireless/ath/ath5k/base.c +++ b/drivers/net/wireless/ath/ath5k/base.c @@ -58,6 +58,7 @@ #include "base.h" #include "reg.h" #include "debug.h" +#include "ani.h" static int modparam_nohwcrypt; module_param_named(nohwcrypt, modparam_nohwcrypt, bool, S_IRUGO); @@ -363,6 +364,7 @@ static void ath5k_beacon_send(struct ath5k_softc *sc); static void ath5k_beacon_config(struct ath5k_softc *sc); static void ath5k_beacon_update_timers(struct ath5k_softc *sc, u64 bc_tsf); static void ath5k_tasklet_beacon(unsigned long data); +static void ath5k_tasklet_ani(unsigned long data); static inline u64 ath5k_extend_tsf(struct ath5k_hw *ah, u32 rstamp) { @@ -828,6 +830,7 @@ ath5k_attach(struct pci_dev *pdev, struct ieee80211_hw *hw) tasklet_init(&sc->restq, ath5k_tasklet_reset, (unsigned long)sc); tasklet_init(&sc->calib, ath5k_tasklet_calibrate, (unsigned long)sc); tasklet_init(&sc->beacontq, ath5k_tasklet_beacon, (unsigned long)sc); + tasklet_init(&sc->ani_tasklet, ath5k_tasklet_ani, (unsigned long)sc); ret = ath5k_eeprom_read_mac(ah, mac); if (ret) { @@ -2530,7 +2533,8 @@ ath5k_init(struct ath5k_softc *sc) sc->curband = &sc->sbands[sc->curchan->band]; sc->imask = AR5K_INT_RXOK | AR5K_INT_RXERR | AR5K_INT_RXEOL | AR5K_INT_RXORN | AR5K_INT_TXDESC | AR5K_INT_TXEOL | - AR5K_INT_FATAL | AR5K_INT_GLOBAL; + AR5K_INT_FATAL | AR5K_INT_GLOBAL | AR5K_INT_MIB; + ret = ath5k_reset(sc, NULL); if (ret) goto done; @@ -2642,6 +2646,7 @@ ath5k_stop_hw(struct ath5k_softc *sc) tasklet_kill(&sc->restq); tasklet_kill(&sc->calib); tasklet_kill(&sc->beacontq); + tasklet_kill(&sc->ani_tasklet); ath5k_rfkill_hw_stop(sc->ah); @@ -2651,7 +2656,14 @@ ath5k_stop_hw(struct ath5k_softc *sc) static void ath5k_intr_calibration_poll(struct ath5k_hw *ah) { - if (time_is_before_eq_jiffies(ah->ah_cal_next_full)) { + if (time_is_before_eq_jiffies(ah->ah_cal_next_ani) && + !(ah->ah_cal_mask & AR5K_CALIBRATION_FULL)) { + /* run ANI only when full calibration is not active */ + ah->ah_cal_next_ani = jiffies + + msecs_to_jiffies(ATH5K_TUNE_CALIBRATION_INTERVAL_ANI); + tasklet_schedule(&ah->ah_sc->ani_tasklet); + + } else if (time_is_before_eq_jiffies(ah->ah_cal_next_full)) { ah->ah_cal_next_full = jiffies + msecs_to_jiffies(ATH5K_TUNE_CALIBRATION_INTERVAL_FULL); tasklet_schedule(&ah->ah_sc->calib); @@ -2710,7 +2722,9 @@ ath5k_intr(int irq, void *dev_id) /* TODO */ } if (status & AR5K_INT_MIB) { + sc->stats.mib_intr++; ath5k_hw_update_mib_counters(ah); + ath5k_ani_mib_intr(ah); } if (status & AR5K_INT_GPIO) tasklet_schedule(&sc->rf_kill.toggleq); @@ -2775,6 +2789,18 @@ ath5k_tasklet_calibrate(unsigned long data) } +static void +ath5k_tasklet_ani(unsigned long data) +{ + struct ath5k_softc *sc = (void *)data; + struct ath5k_hw *ah = sc->ah; + + ah->ah_cal_mask |= AR5K_CALIBRATION_ANI; + ath5k_ani_calibration(ah); + ah->ah_cal_mask &= ~AR5K_CALIBRATION_ANI; +} + + /********************\ * Mac80211 functions * \********************/ @@ -2874,6 +2900,8 @@ ath5k_reset(struct ath5k_softc *sc, struct ieee80211_channel *chan) goto err; } + ath5k_ani_init(ah, ah->ah_sc->ani_state.ani_mode); + /* * Change channels and update the h/w rate map if we're switching; * e.g. 11a to 11b/g. diff --git a/drivers/net/wireless/ath/ath5k/base.h b/drivers/net/wireless/ath/ath5k/base.h index a572a484480..53a5651c57a 100644 --- a/drivers/net/wireless/ath/ath5k/base.h +++ b/drivers/net/wireless/ath/ath5k/base.h @@ -50,6 +50,7 @@ #include "ath5k.h" #include "debug.h" +#include "ani.h" #include "../regd.h" #include "../ath.h" @@ -132,6 +133,8 @@ struct ath5k_statistics { unsigned int rts_ok; unsigned int fcs_error; unsigned int beacons; + + unsigned int mib_intr; }; #if CHAN_DEBUG @@ -221,6 +224,9 @@ struct ath5k_softc { bool enable_beacon; /* true if beacons are on */ struct ath5k_statistics stats; + + struct ath5k_ani_state ani_state; + struct tasklet_struct ani_tasklet; /* ANI calibration */ }; #define ath5k_hw_hasbssidmask(_ah) \ diff --git a/drivers/net/wireless/ath/ath5k/debug.c b/drivers/net/wireless/ath/ath5k/debug.c index 90247dc7419..6fb5c5ffa5b 100644 --- a/drivers/net/wireless/ath/ath5k/debug.c +++ b/drivers/net/wireless/ath/ath5k/debug.c @@ -69,6 +69,7 @@ module_param_named(debug, ath5k_debug, uint, 0); #include <linux/seq_file.h> #include "reg.h" +#include "ani.h" static struct dentry *ath5k_global_debugfs; @@ -307,6 +308,7 @@ static const struct { { ATH5K_DEBUG_DUMP_TX, "dumptx", "print transmit skb content" }, { ATH5K_DEBUG_DUMPBANDS, "dumpbands", "dump bands" }, { ATH5K_DEBUG_TRACE, "trace", "trace function calls" }, + { ATH5K_DEBUG_ANI, "ani", "adaptive noise immunity" }, { ATH5K_DEBUG_ANY, "all", "show all debug levels" }, }; @@ -573,6 +575,160 @@ static const struct file_operations fops_frameerrors = { }; +/* debugfs: ani */ + +static ssize_t read_file_ani(struct file *file, char __user *user_buf, + size_t count, loff_t *ppos) +{ + struct ath5k_softc *sc = file->private_data; + struct ath5k_statistics *st = &sc->stats; + struct ath5k_ani_state *as = &sc->ani_state; + + char buf[700]; + unsigned int len = 0; + + len += snprintf(buf+len, sizeof(buf)-len, + "HW has PHY error counters:\t%s\n", + sc->ah->ah_capabilities.cap_has_phyerr_counters ? + "yes" : "no"); + len += snprintf(buf+len, sizeof(buf)-len, + "HW max spur immunity level:\t%d\n", + as->max_spur_level); + len += snprintf(buf+len, sizeof(buf)-len, + "\nANI state\n--------------------------------------------\n"); + len += snprintf(buf+len, sizeof(buf)-len, "operating mode:\t\t\t"); + switch (as->ani_mode) { + case ATH5K_ANI_MODE_OFF: + len += snprintf(buf+len, sizeof(buf)-len, "OFF\n"); + break; + case ATH5K_ANI_MODE_MANUAL_LOW: + len += snprintf(buf+len, sizeof(buf)-len, + "MANUAL LOW\n"); + break; + case ATH5K_ANI_MODE_MANUAL_HIGH: + len += snprintf(buf+len, sizeof(buf)-len, + "MANUAL HIGH\n"); + break; + case ATH5K_ANI_MODE_AUTO: + len += snprintf(buf+len, sizeof(buf)-len, "AUTO\n"); + break; + default: + len += snprintf(buf+len, sizeof(buf)-len, + "??? (not good)\n"); + break; + } + len += snprintf(buf+len, sizeof(buf)-len, + "noise immunity level:\t\t%d\n", + as->noise_imm_level); + len += snprintf(buf+len, sizeof(buf)-len, + "spur immunity level:\t\t%d\n", + as->spur_level); + len += snprintf(buf+len, sizeof(buf)-len, "firstep level:\t\t\t%d\n", + as->firstep_level); + len += snprintf(buf+len, sizeof(buf)-len, + "OFDM weak signal detection:\t%s\n", + as->ofdm_weak_sig ? "on" : "off"); + len += snprintf(buf+len, sizeof(buf)-len, + "CCK weak signal detection:\t%s\n", + as->cck_weak_sig ? "on" : "off"); + + len += snprintf(buf+len, sizeof(buf)-len, + "\nMIB INTERRUPTS:\t\t%u\n", + st->mib_intr); + len += snprintf(buf+len, sizeof(buf)-len, + "beacon RSSI average:\t%d\n", + sc->ah->ah_beacon_rssi_avg.avg); + len += snprintf(buf+len, sizeof(buf)-len, "profcnt tx\t\t%u\t(%d%%)\n", + as->pfc_tx, + as->pfc_cycles > 0 ? + as->pfc_tx*100/as->pfc_cycles : 0); + len += snprintf(buf+len, sizeof(buf)-len, "profcnt rx\t\t%u\t(%d%%)\n", + as->pfc_rx, + as->pfc_cycles > 0 ? + as->pfc_rx*100/as->pfc_cycles : 0); + len += snprintf(buf+len, sizeof(buf)-len, "profcnt busy\t\t%u\t(%d%%)\n", + as->pfc_busy, + as->pfc_cycles > 0 ? + as->pfc_busy*100/as->pfc_cycles : 0); + len += snprintf(buf+len, sizeof(buf)-len, "profcnt cycles\t\t%u\n", + as->pfc_cycles); + len += snprintf(buf+len, sizeof(buf)-len, + "listen time\t\t%d\tlast: %d\n", + as->listen_time, as->last_listen); + len += snprintf(buf+len, sizeof(buf)-len, + "OFDM errors\t\t%u\tlast: %u\tsum: %u\n", + as->ofdm_errors, as->last_ofdm_errors, + as->sum_ofdm_errors); + len += snprintf(buf+len, sizeof(buf)-len, + "CCK errors\t\t%u\tlast: %u\tsum: %u\n", + as->cck_errors, as->last_cck_errors, + as->sum_cck_errors); + len += snprintf(buf+len, sizeof(buf)-len, + "AR5K_PHYERR_CNT1\t%x\t(=%d)\n", + ath5k_hw_reg_read(sc->ah, AR5K_PHYERR_CNT1), + ATH5K_ANI_OFDM_TRIG_HIGH - (ATH5K_PHYERR_CNT_MAX - + ath5k_hw_reg_read(sc->ah, AR5K_PHYERR_CNT1))); + len += snprintf(buf+len, sizeof(buf)-len, + "AR5K_PHYERR_CNT2\t%x\t(=%d)\n", + ath5k_hw_reg_read(sc->ah, AR5K_PHYERR_CNT2), + ATH5K_ANI_CCK_TRIG_HIGH - (ATH5K_PHYERR_CNT_MAX - + ath5k_hw_reg_read(sc->ah, AR5K_PHYERR_CNT2))); + + return simple_read_from_buffer(user_buf, count, ppos, buf, len); +} + +static ssize_t write_file_ani(struct file *file, + const char __user *userbuf, + size_t count, loff_t *ppos) +{ + struct ath5k_softc *sc = file->private_data; + char buf[20]; + + if (copy_from_user(buf, userbuf, min(count, sizeof(buf)))) + return -EFAULT; + + if (strncmp(buf, "sens-low", 8) == 0) { + ath5k_ani_init(sc->ah, ATH5K_ANI_MODE_MANUAL_HIGH); + } else if (strncmp(buf, "sens-high", 9) == 0) { + ath5k_ani_init(sc->ah, ATH5K_ANI_MODE_MANUAL_LOW); + } else if (strncmp(buf, "ani-off", 7) == 0) { + ath5k_ani_init(sc->ah, ATH5K_ANI_MODE_OFF); + } else if (strncmp(buf, "ani-on", 6) == 0) { + ath5k_ani_init(sc->ah, ATH5K_ANI_MODE_AUTO); + } else if (strncmp(buf, "noise-low", 9) == 0) { + ath5k_ani_set_noise_immunity_level(sc->ah, 0); + } else if (strncmp(buf, "noise-high", 10) == 0) { + ath5k_ani_set_noise_immunity_level(sc->ah, + ATH5K_ANI_MAX_NOISE_IMM_LVL); + } else if (strncmp(buf, "spur-low", 8) == 0) { + ath5k_ani_set_spur_immunity_level(sc->ah, 0); + } else if (strncmp(buf, "spur-high", 9) == 0) { + ath5k_ani_set_spur_immunity_level(sc->ah, + sc->ani_state.max_spur_level); + } else if (strncmp(buf, "fir-low", 7) == 0) { + ath5k_ani_set_firstep_level(sc->ah, 0); + } else if (strncmp(buf, "fir-high", 8) == 0) { + ath5k_ani_set_firstep_level(sc->ah, ATH5K_ANI_MAX_FIRSTEP_LVL); + } else if (strncmp(buf, "ofdm-off", 8) == 0) { + ath5k_ani_set_ofdm_weak_signal_detection(sc->ah, false); + } else if (strncmp(buf, "ofdm-on", 7) == 0) { + ath5k_ani_set_ofdm_weak_signal_detection(sc->ah, true); + } else if (strncmp(buf, "cck-off", 7) == 0) { + ath5k_ani_set_cck_weak_signal_detection(sc->ah, false); + } else if (strncmp(buf, "cck-on", 6) == 0) { + ath5k_ani_set_cck_weak_signal_detection(sc->ah, true); + } + return count; +} + +static const struct file_operations fops_ani = { + .read = read_file_ani, + .write = write_file_ani, + .open = ath5k_debugfs_open, + .owner = THIS_MODULE, +}; + + /* init */ void @@ -611,6 +767,11 @@ ath5k_debug_init_device(struct ath5k_softc *sc) S_IWUSR | S_IRUSR, sc->debug.debugfs_phydir, sc, &fops_frameerrors); + + sc->debug.debugfs_ani = debugfs_create_file("ani", + S_IWUSR | S_IRUSR, + sc->debug.debugfs_phydir, sc, + &fops_ani); } void @@ -628,6 +789,7 @@ ath5k_debug_finish_device(struct ath5k_softc *sc) debugfs_remove(sc->debug.debugfs_reset); debugfs_remove(sc->debug.debugfs_antenna); debugfs_remove(sc->debug.debugfs_frameerrors); + debugfs_remove(sc->debug.debugfs_ani); debugfs_remove(sc->debug.debugfs_phydir); } diff --git a/drivers/net/wireless/ath/ath5k/debug.h b/drivers/net/wireless/ath/ath5k/debug.h index da24ff52e27..ddd5b3a99e8 100644 --- a/drivers/net/wireless/ath/ath5k/debug.h +++ b/drivers/net/wireless/ath/ath5k/debug.h @@ -76,6 +76,7 @@ struct ath5k_dbg_info { struct dentry *debugfs_reset; struct dentry *debugfs_antenna; struct dentry *debugfs_frameerrors; + struct dentry *debugfs_ani; }; /** @@ -115,6 +116,7 @@ enum ath5k_debug_level { ATH5K_DEBUG_DUMP_TX = 0x00000200, ATH5K_DEBUG_DUMPBANDS = 0x00000400, ATH5K_DEBUG_TRACE = 0x00001000, + ATH5K_DEBUG_ANI = 0x00002000, ATH5K_DEBUG_ANY = 0xffffffff }; diff --git a/drivers/net/wireless/ath/ath5k/desc.c b/drivers/net/wireless/ath/ath5k/desc.c index 9d920fb14d5..7d7b646ab65 100644 --- a/drivers/net/wireless/ath/ath5k/desc.c +++ b/drivers/net/wireless/ath/ath5k/desc.c @@ -645,6 +645,7 @@ static int ath5k_hw_proc_5212_rx_status(struct ath5k_hw *ah, rs->rs_status |= AR5K_RXERR_PHY; rs->rs_phyerr |= AR5K_REG_MS(rx_err->rx_error_1, AR5K_RX_DESC_ERROR1_PHY_ERROR_CODE); + ath5k_ani_phy_error_report(ah, rs->rs_phyerr); } if (rx_status->rx_status_1 & diff --git a/drivers/net/wireless/ath/ath5k/pcu.c b/drivers/net/wireless/ath/ath5k/pcu.c index c7c1fe02372..710870ea179 100644 --- a/drivers/net/wireless/ath/ath5k/pcu.c +++ b/drivers/net/wireless/ath/ath5k/pcu.c @@ -379,7 +379,6 @@ void ath5k_hw_set_bssid_mask(struct ath5k_hw *ah, const u8 *mask) * (ACK etc). * * NOTE: RX DMA should be already enabled using ath5k_hw_start_rx_dma - * TODO: Init ANI here */ void ath5k_hw_start_rx_pcu(struct ath5k_hw *ah) { diff --git a/drivers/net/wireless/ath/ath5k/reg.h b/drivers/net/wireless/ath/ath5k/reg.h index f325e664065..cbd11d4c98e 100644 --- a/drivers/net/wireless/ath/ath5k/reg.h +++ b/drivers/net/wireless/ath/ath5k/reg.h @@ -212,10 +212,10 @@ * MIB control register */ #define AR5K_MIBC 0x0040 /* Register Address */ -#define AR5K_MIBC_COW 0x00000001 /* Warn test indicator */ +#define AR5K_MIBC_COW 0x00000001 /* Counter Overflow Warning */ #define AR5K_MIBC_FMC 0x00000002 /* Freeze MIB Counters */ -#define AR5K_MIBC_CMC 0x00000004 /* Clean MIB Counters */ -#define AR5K_MIBC_MCS 0x00000008 /* MIB counter strobe */ +#define AR5K_MIBC_CMC 0x00000004 /* Clear MIB Counters */ +#define AR5K_MIBC_MCS 0x00000008 /* MIB counter strobe, increment all */ /* * Timeout prescale register @@ -1516,7 +1516,14 @@ AR5K_NAV_5210 : AR5K_NAV_5211) /* - * RTS success register + * MIB counters: + * + * max value is 0xc000, if this is reached we get a MIB interrupt. + * they can be controlled via AR5K_MIBC and are cleared on read. + */ + +/* + * RTS success (MIB counter) */ #define AR5K_RTS_OK_5210 0x8090 #define AR5K_RTS_OK_5211 0x8088 @@ -1524,7 +1531,7 @@ AR5K_RTS_OK_5210 : AR5K_RTS_OK_5211) /* - * RTS failure register + * RTS failure (MIB counter) */ #define AR5K_RTS_FAIL_5210 0x8094 #define AR5K_RTS_FAIL_5211 0x808c @@ -1532,7 +1539,7 @@ AR5K_RTS_FAIL_5210 : AR5K_RTS_FAIL_5211) /* - * ACK failure register + * ACK failure (MIB counter) */ #define AR5K_ACK_FAIL_5210 0x8098 #define AR5K_ACK_FAIL_5211 0x8090 @@ -1540,7 +1547,7 @@ AR5K_ACK_FAIL_5210 : AR5K_ACK_FAIL_5211) /* - * FCS failure register + * FCS failure (MIB counter) */ #define AR5K_FCS_FAIL_5210 0x809c #define AR5K_FCS_FAIL_5211 0x8094 @@ -1667,11 +1674,17 @@ /* * Profile count registers + * + * These registers can be cleared and freezed with ATH5K_MIBC, but they do not + * generate a MIB interrupt. + * Instead of overflowing, they shift by one bit to the right. All registers + * shift together, i.e. when one reaches the max, all shift at the same time by + * one bit to the right. This way we should always get consistent values. */ #define AR5K_PROFCNT_TX 0x80ec /* Tx count */ #define AR5K_PROFCNT_RX 0x80f0 /* Rx count */ -#define AR5K_PROFCNT_RXCLR 0x80f4 /* Clear Rx count */ -#define AR5K_PROFCNT_CYCLE 0x80f8 /* Cycle count (?) */ +#define AR5K_PROFCNT_RXCLR 0x80f4 /* Busy count */ +#define AR5K_PROFCNT_CYCLE 0x80f8 /* Cycle counter */ /* * Quiet period control registers @@ -1758,7 +1771,7 @@ #define AR5K_CCK_FIL_CNT 0x8128 /* - * PHY Error Counters (?) + * PHY Error Counters (same masks as AR5K_PHY_ERR_FIL) */ #define AR5K_PHYERR_CNT1 0x812c #define AR5K_PHYERR_CNT1_MASK 0x8130 @@ -1766,6 +1779,9 @@ #define AR5K_PHYERR_CNT2 0x8134 #define AR5K_PHYERR_CNT2_MASK 0x8138 +/* if the PHY Error Counters reach this maximum, we get MIB interrupts */ +#define ATH5K_PHYERR_CNT_MAX 0x00c00000 + /* * TSF Threshold register (?) */ |