diff options
209 files changed, 14078 insertions, 3522 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 4d1c3093a13..fac58916ade 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -352,6 +352,14 @@ config ARCH_MXC help Support for Freescale MXC/iMX-based family of processors +config ARCH_MXS + bool "Freescale MXS-based" + select GENERIC_CLOCKEVENTS + select ARCH_REQUIRE_GPIOLIB + select COMMON_CLKDEV + help + Support for Freescale MXS-based family of processors + config ARCH_STMP3XXX bool "Freescale STMP3xxx" select CPU_ARM926T @@ -904,6 +912,8 @@ source "arch/arm/mach-mv78xx0/Kconfig" source "arch/arm/plat-mxc/Kconfig" +source "arch/arm/mach-mxs/Kconfig" + source "arch/arm/mach-netx/Kconfig" source "arch/arm/mach-nomadik/Kconfig" diff --git a/arch/arm/Makefile b/arch/arm/Makefile index b87aed028ee..c22c1adfedd 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -154,10 +154,11 @@ machine-$(CONFIG_ARCH_MSM) := msm machine-$(CONFIG_ARCH_MV78XX0) := mv78xx0 machine-$(CONFIG_ARCH_MX1) := imx machine-$(CONFIG_ARCH_MX2) := imx -machine-$(CONFIG_ARCH_MX25) := mx25 +machine-$(CONFIG_ARCH_MX25) := imx machine-$(CONFIG_ARCH_MX3) := mx3 machine-$(CONFIG_ARCH_MX5) := mx5 machine-$(CONFIG_ARCH_MXC91231) := mxc91231 +machine-$(CONFIG_ARCH_MXS) := mxs machine-$(CONFIG_ARCH_NETX) := netx machine-$(CONFIG_ARCH_NOMADIK) := nomadik machine-$(CONFIG_ARCH_NS9XXX) := ns9xxx diff --git a/arch/arm/configs/mx3_defconfig b/arch/arm/configs/mx3_defconfig index f0c339fd5d2..e648ea3429b 100644 --- a/arch/arm/configs/mx3_defconfig +++ b/arch/arm/configs/mx3_defconfig @@ -84,6 +84,7 @@ CONFIG_SERIAL_IMX_CONSOLE=y CONFIG_I2C=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_IMX=y +CONFIG_SPI=y CONFIG_W1=y CONFIG_W1_MASTER_MXC=y CONFIG_W1_SLAVE_THERM=y diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index 197f9e241cf..17d2e608a21 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -1,13 +1,37 @@ config IMX_HAVE_DMA_V1 bool -if ARCH_MX1 - config SOC_IMX1 + bool select CPU_ARM920T select IMX_HAVE_DMA_V1 select IMX_HAVE_IOMUX_V1 + select MXC_AVIC + +config SOC_IMX21 + bool + select CPU_ARM926T + select ARCH_MXC_AUDMUX_V1 + select IMX_HAVE_DMA_V1 + select IMX_HAVE_IOMUX_V1 + select MXC_AVIC + +config SOC_IMX25 bool + select CPU_ARM926T + select ARCH_MXC_AUDMUX_V2 + select ARCH_MXC_IOMUX_V3 + select MXC_AVIC + +config SOC_IMX27 + bool + select CPU_ARM926T + select ARCH_MXC_AUDMUX_V1 + select IMX_HAVE_DMA_V1 + select IMX_HAVE_IOMUX_V1 + select MXC_AVIC + +if ARCH_MX1 comment "MX1 platforms:" config MACH_MXLADS @@ -31,33 +55,17 @@ endif if ARCH_MX2 -config SOC_IMX21 - select CPU_ARM926T - select ARCH_MXC_AUDMUX_V1 - select IMX_HAVE_DMA_V1 - select IMX_HAVE_IOMUX_V1 - bool - -config SOC_IMX27 - select CPU_ARM926T - select ARCH_MXC_AUDMUX_V1 - select IMX_HAVE_DMA_V1 - select IMX_HAVE_IOMUX_V1 - bool - choice prompt "CPUs:" default MACH_MX21 config MACH_MX21 bool "i.MX21 support" - select SOC_IMX21 help This enables support for Freescale's MX2 based i.MX21 processor. config MACH_MX27 bool "i.MX27 support" - select SOC_IMX27 help This enables support for Freescale's MX2 based i.MX27 processor. @@ -71,7 +79,10 @@ comment "MX21 platforms:" config MACH_MX21ADS bool "MX21ADS platform" + select SOC_IMX21 + select IMX_HAVE_PLATFORM_IMX_FB select IMX_HAVE_PLATFORM_IMX_UART + select IMX_HAVE_PLATFORM_MXC_MMC select IMX_HAVE_PLATFORM_MXC_NAND help Include support for MX21ADS platform. This includes specific @@ -79,24 +90,79 @@ config MACH_MX21ADS endif +if ARCH_MX25 + +comment "MX25 platforms:" + +config MACH_MX25_3DS + bool "Support MX25PDK (3DS) Platform" + select SOC_IMX25 + select IMX_HAVE_PLATFORM_FSL_USB2_UDC + select IMX_HAVE_PLATFORM_IMX2_WDT + select IMX_HAVE_PLATFORM_IMXDI_RTC + select IMX_HAVE_PLATFORM_IMX_FB + select IMX_HAVE_PLATFORM_IMX_KEYPAD + select IMX_HAVE_PLATFORM_IMX_UART + select IMX_HAVE_PLATFORM_MXC_EHCI + select IMX_HAVE_PLATFORM_MXC_NAND + select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX + +config MACH_EUKREA_CPUIMX25 + bool "Support Eukrea CPUIMX25 Platform" + select SOC_IMX25 + select IMX_HAVE_PLATFORM_FLEXCAN + select IMX_HAVE_PLATFORM_FSL_USB2_UDC + select IMX_HAVE_PLATFORM_IMXDI_RTC + select IMX_HAVE_PLATFORM_IMX_FB + select IMX_HAVE_PLATFORM_IMX_I2C + select IMX_HAVE_PLATFORM_IMX_UART + select IMX_HAVE_PLATFORM_MXC_EHCI + select IMX_HAVE_PLATFORM_MXC_NAND + select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX + select MXC_ULPI if USB_ULPI + +choice + prompt "Baseboard" + depends on MACH_EUKREA_CPUIMX25 + default MACH_EUKREA_MBIMXSD25_BASEBOARD + +config MACH_EUKREA_MBIMXSD25_BASEBOARD + bool "Eukrea MBIMXSD development board" + select IMX_HAVE_PLATFORM_IMX_SSI + help + This adds board specific devices that can be found on Eukrea's + MBIMXSD evaluation board. + +endchoice + +endif + if MACH_MX27 comment "MX27 platforms:" config MACH_MX27ADS bool "MX27ADS platform" + select SOC_IMX27 + select IMX_HAVE_PLATFORM_IMX_FB select IMX_HAVE_PLATFORM_IMX_I2C select IMX_HAVE_PLATFORM_IMX_UART + select IMX_HAVE_PLATFORM_MXC_MMC select IMX_HAVE_PLATFORM_MXC_NAND + select IMX_HAVE_PLATFORM_MXC_W1 help Include support for MX27ADS platform. This includes specific configurations for the board and its peripherals. config MACH_PCM038 bool "Phytec phyCORE-i.MX27 CPU module (pcm038)" + select SOC_IMX27 + select IMX_HAVE_PLATFORM_IMX2_WDT select IMX_HAVE_PLATFORM_IMX_I2C select IMX_HAVE_PLATFORM_IMX_UART + select IMX_HAVE_PLATFORM_MXC_EHCI select IMX_HAVE_PLATFORM_MXC_NAND + select IMX_HAVE_PLATFORM_MXC_W1 select IMX_HAVE_PLATFORM_SPI_IMX select MXC_ULPI if USB_ULPI help @@ -109,8 +175,9 @@ choice default MACH_PCM970_BASEBOARD config MACH_PCM970_BASEBOARD - prompt "PHYTEC PCM970 development board" - bool + bool "PHYTEC PCM970 development board" + select IMX_HAVE_PLATFORM_IMX_FB + select IMX_HAVE_PLATFORM_MXC_MMC help This adds board specific devices that can be found on Phytec's PCM970 evaluation board. @@ -119,9 +186,14 @@ endchoice config MACH_CPUIMX27 bool "Eukrea CPUIMX27 module" + select SOC_IMX27 + select IMX_HAVE_PLATFORM_FSL_USB2_UDC + select IMX_HAVE_PLATFORM_IMX2_WDT select IMX_HAVE_PLATFORM_IMX_I2C select IMX_HAVE_PLATFORM_IMX_UART + select IMX_HAVE_PLATFORM_MXC_EHCI select IMX_HAVE_PLATFORM_MXC_NAND + select IMX_HAVE_PLATFORM_MXC_W1 select MXC_ULPI if USB_ULPI help Include support for Eukrea CPUIMX27 platform. This includes @@ -130,6 +202,7 @@ config MACH_CPUIMX27 config MACH_EUKREA_CPUIMX27_USESDHC2 bool "CPUIMX27 integrates SDHC2 module" depends on MACH_CPUIMX27 + select IMX_HAVE_PLATFORM_MXC_MMC help This adds support for the internal SDHC2 used on CPUIMX27 for wifi or eMMC. @@ -148,8 +221,11 @@ choice config MACH_EUKREA_MBIMX27_BASEBOARD bool "Eukrea MBIMX27 development board" + select IMX_HAVE_PLATFORM_IMX_FB + select IMX_HAVE_PLATFORM_IMX_KEYPAD select IMX_HAVE_PLATFORM_IMX_SSI select IMX_HAVE_PLATFORM_IMX_UART + select IMX_HAVE_PLATFORM_MXC_MMC select IMX_HAVE_PLATFORM_SPI_IMX help This adds board specific devices that can be found on Eukrea's @@ -159,15 +235,26 @@ endchoice config MACH_MX27_3DS bool "MX27PDK platform" + select SOC_IMX27 + select IMX_HAVE_PLATFORM_FSL_USB2_UDC + select IMX_HAVE_PLATFORM_IMX2_WDT + select IMX_HAVE_PLATFORM_IMX_KEYPAD select IMX_HAVE_PLATFORM_IMX_UART + select IMX_HAVE_PLATFORM_MXC_EHCI + select IMX_HAVE_PLATFORM_MXC_MMC + select IMX_HAVE_PLATFORM_SPI_IMX + select MXC_ULPI if USB_ULPI help Include support for MX27PDK platform. This includes specific configurations for the board and its peripherals. config MACH_IMX27_VISSTRIM_M10 bool "Vista Silicon i.MX27 Visstrim_m10" + select SOC_IMX27 select IMX_HAVE_PLATFORM_IMX_I2C select IMX_HAVE_PLATFORM_IMX_UART + select IMX_HAVE_PLATFORM_MXC_MMC + select IMX_HAVE_PLATFORM_MXC_EHCI help Include support for Visstrim_m10 platform and its different variants. This includes specific configurations for the board and its @@ -175,6 +262,7 @@ config MACH_IMX27_VISSTRIM_M10 config MACH_IMX27LITE bool "LogicPD MX27 LITEKIT platform" + select SOC_IMX27 select IMX_HAVE_PLATFORM_IMX_UART help Include support for MX27 LITEKIT platform. This includes specific @@ -182,10 +270,17 @@ config MACH_IMX27LITE config MACH_PCA100 bool "Phytec phyCARD-s (pca100)" + select SOC_IMX27 + select IMX_HAVE_PLATFORM_FSL_USB2_UDC + select IMX_HAVE_PLATFORM_IMX2_WDT + select IMX_HAVE_PLATFORM_IMX_FB select IMX_HAVE_PLATFORM_IMX_I2C select IMX_HAVE_PLATFORM_IMX_SSI select IMX_HAVE_PLATFORM_IMX_UART + select IMX_HAVE_PLATFORM_MXC_EHCI + select IMX_HAVE_PLATFORM_MXC_MMC select IMX_HAVE_PLATFORM_MXC_NAND + select IMX_HAVE_PLATFORM_MXC_W1 select IMX_HAVE_PLATFORM_SPI_IMX select MXC_ULPI if USB_ULPI help @@ -194,8 +289,11 @@ config MACH_PCA100 config MACH_MXT_TD60 bool "Maxtrack i-MXT TD60" + select SOC_IMX27 + select IMX_HAVE_PLATFORM_IMX_FB select IMX_HAVE_PLATFORM_IMX_I2C select IMX_HAVE_PLATFORM_IMX_UART + select IMX_HAVE_PLATFORM_MXC_MMC select IMX_HAVE_PLATFORM_MXC_NAND help Include support for i-MXT (aka td60) platform. This diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile index 5582692bb17..77100bf2615 100644 --- a/arch/arm/mach-imx/Makefile +++ b/arch/arm/mach-imx/Makefile @@ -4,13 +4,13 @@ # Object file lists. -obj-y := devices.o - obj-$(CONFIG_IMX_HAVE_DMA_V1) += dma-v1.o obj-$(CONFIG_ARCH_MX1) += clock-imx1.o mm-imx1.o obj-$(CONFIG_MACH_MX21) += clock-imx21.o mm-imx21.o +obj-$(CONFIG_ARCH_MX25) += clock-imx25.o mm-imx25.o + obj-$(CONFIG_MACH_MX27) += cpu-imx27.o pm-imx27.o obj-$(CONFIG_MACH_MX27) += clock-imx27.o mm-imx27.o @@ -22,6 +22,10 @@ obj-$(CONFIG_MACH_SCB9328) += mach-scb9328.o obj-$(CONFIG_MACH_MX21ADS) += mach-mx21ads.o +obj-$(CONFIG_MACH_MX25_3DS) += mach-mx25_3ds.o +obj-$(CONFIG_MACH_EUKREA_CPUIMX25) += mach-eukrea_cpuimx25.o +obj-$(CONFIG_MACH_EUKREA_MBIMXSD25_BASEBOARD) += eukrea_mbimxsd25-baseboard.o + obj-$(CONFIG_MACH_MX27ADS) += mach-mx27ads.o obj-$(CONFIG_MACH_PCM038) += mach-pcm038.o obj-$(CONFIG_MACH_PCM970_BASEBOARD) += pcm970-baseboard.o diff --git a/arch/arm/mach-imx/Makefile.boot b/arch/arm/mach-imx/Makefile.boot index 7988a85cf07..3953d60bff0 100644 --- a/arch/arm/mach-imx/Makefile.boot +++ b/arch/arm/mach-imx/Makefile.boot @@ -6,6 +6,10 @@ zreladdr-$(CONFIG_MACH_MX21) := 0xC0008000 params_phys-$(CONFIG_MACH_MX21) := 0xC0000100 initrd_phys-$(CONFIG_MACH_MX21) := 0xC0800000 +zreladdr-$(CONFIG_ARCH_MX25) := 0x80008000 +params_phys-$(CONFIG_ARCH_MX25) := 0x80000100 +initrd_phys-$(CONFIG_ARCH_MX25) := 0x80800000 + zreladdr-$(CONFIG_MACH_MX27) := 0xA0008000 params_phys-$(CONFIG_MACH_MX27) := 0xA0000100 initrd_phys-$(CONFIG_MACH_MX27) := 0xA0800000 diff --git a/arch/arm/mach-imx/clock-imx21.c b/arch/arm/mach-imx/clock-imx21.c index cf15ea516a7..c63a4f5ffcb 100644 --- a/arch/arm/mach-imx/clock-imx21.c +++ b/arch/arm/mach-imx/clock-imx21.c @@ -1185,7 +1185,7 @@ static struct clk_lookup lookups[] = { _REGISTER_CLOCK(NULL, "brom", brom_clk) _REGISTER_CLOCK(NULL, "emma", emma_clk[0]) _REGISTER_CLOCK(NULL, "slcdc", slcdc_clk[0]) - _REGISTER_CLOCK("imx-wdt.0", NULL, wdog_clk) + _REGISTER_CLOCK("imx2-wdt.0", NULL, wdog_clk) _REGISTER_CLOCK(NULL, "gpio", gpio_clk) _REGISTER_CLOCK("imx-i2c.0", NULL, i2c_clk) _REGISTER_CLOCK("mxc-keypad", NULL, kpp_clk) diff --git a/arch/arm/mach-mx25/clock.c b/arch/arm/mach-imx/clock-imx25.c index 9e4a5578c2f..21ef34c501e 100644 --- a/arch/arm/mach-mx25/clock.c +++ b/arch/arm/mach-imx/clock-imx25.c @@ -296,7 +296,7 @@ static struct clk_lookup lookups[] = { _REGISTER_CLOCK("fec.0", NULL, fec_clk) _REGISTER_CLOCK("imxdi_rtc.0", NULL, dryice_clk) _REGISTER_CLOCK("imx-fb.0", NULL, lcdc_clk) - _REGISTER_CLOCK("imx-wdt.0", NULL, wdt_clk) + _REGISTER_CLOCK("imx2-wdt.0", NULL, wdt_clk) _REGISTER_CLOCK("imx-ssi.0", NULL, ssi1_clk) _REGISTER_CLOCK("imx-ssi.1", NULL, ssi2_clk) _REGISTER_CLOCK("sdhci-esdhc-imx.0", NULL, esdhc1_clk) diff --git a/arch/arm/mach-imx/clock-imx27.c b/arch/arm/mach-imx/clock-imx27.c index 98a25bada78..f32f3b8e8ba 100644 --- a/arch/arm/mach-imx/clock-imx27.c +++ b/arch/arm/mach-imx/clock-imx27.c @@ -125,7 +125,7 @@ static int clk_cpu_set_parent(struct clk *clk, struct clk *parent) if (clk->parent == parent) return 0; - if (mx27_revision() >= CHIP_REV_2_0) { + if (mx27_revision() >= IMX_CHIP_REVISION_2_0) { if (parent == &mpll_main1_clk) { cscr |= CCM_CSCR_ARM_SRC; } else { @@ -174,7 +174,7 @@ static int set_rate_cpu(struct clk *clk, unsigned long rate) div--; reg = __raw_readl(CCM_CSCR); - if (mx27_revision() >= CHIP_REV_2_0) { + if (mx27_revision() >= IMX_CHIP_REVISION_2_0) { reg &= ~(3 << 12); reg |= div << 12; reg &= ~(CCM_CSCR_FPM | CCM_CSCR_SPEN); @@ -244,7 +244,7 @@ static unsigned long get_rate_ssix(struct clk *clk, unsigned long pdf) parent_rate = clk_get_rate(clk->parent); - if (mx27_revision() >= CHIP_REV_2_0) + if (mx27_revision() >= IMX_CHIP_REVISION_2_0) pdf += 4; /* MX27 TO2+ */ else pdf = (pdf < 2) ? 124UL : pdf; /* MX21 & MX27 TO1 */ @@ -269,7 +269,7 @@ static unsigned long get_rate_nfc(struct clk *clk) parent_rate = clk_get_rate(clk->parent); - if (mx27_revision() >= CHIP_REV_2_0) + if (mx27_revision() >= IMX_CHIP_REVISION_2_0) nfc_pdf = (__raw_readl(CCM_PCDR0) >> 6) & 0xf; else nfc_pdf = (__raw_readl(CCM_PCDR0) >> 12) & 0xf; @@ -284,7 +284,7 @@ static unsigned long get_rate_vpu(struct clk *clk) parent_rate = clk_get_rate(clk->parent); - if (mx27_revision() >= CHIP_REV_2_0) { + if (mx27_revision() >= IMX_CHIP_REVISION_2_0) { vpu_pdf = (__raw_readl(CCM_PCDR0) >> 10) & 0x3f; vpu_pdf += 4; } else { @@ -347,7 +347,7 @@ static unsigned long get_rate_mpll_main(struct clk *clk) * clk->id == 0: arm clock source path 1 which is from 2 * MPLL / 2 * clk->id == 1: arm clock source path 2 which is from 2 * MPLL / 3 */ - if (mx27_revision() >= CHIP_REV_2_0 && clk->id == 1) + if (mx27_revision() >= IMX_CHIP_REVISION_2_0 && clk->id == 1) return 2UL * parent_rate / 3UL; return parent_rate; @@ -365,7 +365,7 @@ static unsigned long get_rate_spll(struct clk *clk) /* On TO2 we have to write the value back. Otherwise we * read 0 from this register the next time. */ - if (mx27_revision() >= CHIP_REV_2_0) + if (mx27_revision() >= IMX_CHIP_REVISION_2_0) __raw_writel(reg, CCM_SPCTL0); return mxc_decode_pll(reg, rate); @@ -376,7 +376,7 @@ static unsigned long get_rate_cpu(struct clk *clk) u32 div; unsigned long rate; - if (mx27_revision() >= CHIP_REV_2_0) + if (mx27_revision() >= IMX_CHIP_REVISION_2_0) div = (__raw_readl(CCM_CSCR) >> 12) & 0x3; else div = (__raw_readl(CCM_CSCR) >> 13) & 0x7; @@ -389,7 +389,7 @@ static unsigned long get_rate_ahb(struct clk *clk) { unsigned long rate, bclk_pdf; - if (mx27_revision() >= CHIP_REV_2_0) + if (mx27_revision() >= IMX_CHIP_REVISION_2_0) bclk_pdf = (__raw_readl(CCM_CSCR) >> 8) & 0x3; else bclk_pdf = (__raw_readl(CCM_CSCR) >> 9) & 0xf; @@ -402,7 +402,7 @@ static unsigned long get_rate_ipg(struct clk *clk) { unsigned long rate, ipg_pdf; - if (mx27_revision() >= CHIP_REV_2_0) + if (mx27_revision() >= IMX_CHIP_REVISION_2_0) return clk_get_rate(clk->parent); else ipg_pdf = (__raw_readl(CCM_CSCR) >> 8) & 1; @@ -667,7 +667,7 @@ static struct clk_lookup lookups[] = { _REGISTER_CLOCK(NULL, "sahara2", sahara2_clk) _REGISTER_CLOCK(NULL, "ata", ata_clk) _REGISTER_CLOCK(NULL, "mstick", mstick_clk) - _REGISTER_CLOCK("imx-wdt.0", NULL, wdog_clk) + _REGISTER_CLOCK("imx2-wdt.0", NULL, wdog_clk) _REGISTER_CLOCK(NULL, "gpio", gpio_clk) _REGISTER_CLOCK("imx-i2c.0", NULL, i2c1_clk) _REGISTER_CLOCK("imx-i2c.1", NULL, i2c2_clk) @@ -683,7 +683,7 @@ static void __init to2_adjust_clocks(void) { unsigned long cscr = __raw_readl(CCM_CSCR); - if (mx27_revision() >= CHIP_REV_2_0) { + if (mx27_revision() >= IMX_CHIP_REVISION_2_0) { if (cscr & CCM_CSCR_ARM_SRC) cpu_clk.parent = &mpll_main1_clk; diff --git a/arch/arm/mach-imx/cpu-imx27.c b/arch/arm/mach-imx/cpu-imx27.c index d8d3b2d84dc..3b117be37bd 100644 --- a/arch/arm/mach-imx/cpu-imx27.c +++ b/arch/arm/mach-imx/cpu-imx27.c @@ -42,7 +42,19 @@ static void query_silicon_parameter(void) val = __raw_readl(MX27_IO_ADDRESS(MX27_SYSCTRL_BASE_ADDR + SYS_CHIP_ID)); - cpu_silicon_rev = (int)(val >> 28); + switch (val >> 28) { + case 0: + cpu_silicon_rev = IMX_CHIP_REVISION_1_0; + break; + case 1: + cpu_silicon_rev = IMX_CHIP_REVISION_2_0; + break; + case 2: + cpu_silicon_rev = IMX_CHIP_REVISION_2_1; + break; + default: + cpu_silicon_rev = IMX_CHIP_REVISION_UNKNOWN; + } cpu_partnumber = (int)((val >> 12) & 0xFFFF); } diff --git a/arch/arm/mach-imx/devices-imx21.h b/arch/arm/mach-imx/devices-imx21.h index d189039749b..16744d2d9b8 100644 --- a/arch/arm/mach-imx/devices-imx21.h +++ b/arch/arm/mach-imx/devices-imx21.h @@ -9,10 +9,26 @@ #include <mach/mx21.h> #include <mach/devices-common.h> +extern const struct imx_imx21_hcd_data imx21_imx21_hcd_data __initconst; +#define imx21_add_imx21_hcd(pdata) \ + imx_add_imx21_hcd(&imx21_imx21_hcd_data, pdata) + +extern const struct imx_imx2_wdt_data imx21_imx2_wdt_data __initconst; +#define imx21_add_imx2_wdt(pdata) \ + imx_add_imx2_wdt(&imx21_imx2_wdt_data) + +extern const struct imx_imx_fb_data imx21_imx_fb_data __initconst; +#define imx21_add_imx_fb(pdata) \ + imx_add_imx_fb(&imx21_imx_fb_data, pdata) + extern const struct imx_imx_i2c_data imx21_imx_i2c_data __initconst; #define imx21_add_imx_i2c(pdata) \ imx_add_imx_i2c(&imx21_imx_i2c_data, pdata) +extern const struct imx_imx_keypad_data imx21_imx_keypad_data __initconst; +#define imx21_add_imx_keypad(pdata) \ + imx_add_imx_keypad(&imx21_imx_keypad_data, pdata) + extern const struct imx_imx_ssi_data imx21_imx_ssi_data[] __initconst; #define imx21_add_imx_ssi(id, pdata) \ imx_add_imx_ssi(&imx21_imx_ssi_data[id], pdata) @@ -25,10 +41,18 @@ extern const struct imx_imx_uart_1irq_data imx21_imx_uart_data[] __initconst; #define imx21_add_imx_uart2(pdata) imx21_add_imx_uart(2, pdata) #define imx21_add_imx_uart3(pdata) imx21_add_imx_uart(3, pdata) +extern const struct imx_mxc_mmc_data imx21_mxc_mmc_data[] __initconst; +#define imx21_add_mxc_mmc(id, pdata) \ + imx_add_mxc_mmc(&imx21_mxc_mmc_data[id], pdata) + extern const struct imx_mxc_nand_data imx21_mxc_nand_data __initconst; #define imx21_add_mxc_nand(pdata) \ imx_add_mxc_nand(&imx21_mxc_nand_data, pdata) +extern const struct imx_mxc_w1_data imx21_mxc_w1_data __initconst; +#define imx21_add_mxc_w1(pdata) \ + imx_add_mxc_w1(&imx21_mxc_w1_data) + extern const struct imx_spi_imx_data imx21_cspi_data[] __initconst; #define imx21_add_cspi(id, pdata) \ imx_add_spi_imx(&imx21_cspi_data[id], pdata) diff --git a/arch/arm/mach-mx25/devices-imx25.h b/arch/arm/mach-imx/devices-imx25.h index d94d282fa67..bde33caf1b9 100644 --- a/arch/arm/mach-mx25/devices-imx25.h +++ b/arch/arm/mach-imx/devices-imx25.h @@ -13,10 +13,27 @@ extern const struct imx_fec_data imx25_fec_data __initconst; #define imx25_add_fec(pdata) \ imx_add_fec(&imx25_fec_data, pdata) -#define imx25_add_flexcan0(pdata) \ - imx_add_flexcan(0, MX25_CAN1_BASE_ADDR, SZ_16K, MX25_INT_CAN1, pdata) -#define imx25_add_flexcan1(pdata) \ - imx_add_flexcan(1, MX25_CAN2_BASE_ADDR, SZ_16K, MX25_INT_CAN2, pdata) +extern const struct imx_flexcan_data imx25_flexcan_data[] __initconst; +#define imx25_add_flexcan(id, pdata) \ + imx_add_flexcan(&imx25_flexcan_data[id], pdata) +#define imx25_add_flexcan0(pdata) imx25_add_flexcan(0, pdata) +#define imx25_add_flexcan1(pdata) imx25_add_flexcan(1, pdata) + +extern const struct imx_fsl_usb2_udc_data imx25_fsl_usb2_udc_data __initconst; +#define imx25_add_fsl_usb2_udc(pdata) \ + imx_add_fsl_usb2_udc(&imx25_fsl_usb2_udc_data, pdata) + +extern struct imx_imxdi_rtc_data imx25_imxdi_rtc_data __initconst; +#define imx25_add_imxdi_rtc(pdata) \ + imx_add_imxdi_rtc(&imx25_imxdi_rtc_data) + +extern const struct imx_imx2_wdt_data imx25_imx2_wdt_data __initconst; +#define imx25_add_imx2_wdt(pdata) \ + imx_add_imx2_wdt(&imx25_imx2_wdt_data) + +extern const struct imx_imx_fb_data imx25_imx_fb_data __initconst; +#define imx25_add_imx_fb(pdata) \ + imx_add_imx_fb(&imx25_imx_fb_data, pdata) extern const struct imx_imx_i2c_data imx25_imx_i2c_data[] __initconst; #define imx25_add_imx_i2c(id, pdata) \ @@ -25,6 +42,10 @@ extern const struct imx_imx_i2c_data imx25_imx_i2c_data[] __initconst; #define imx25_add_imx_i2c1(pdata) imx25_add_imx_i2c(1, pdata) #define imx25_add_imx_i2c2(pdata) imx25_add_imx_i2c(2, pdata) +extern const struct imx_imx_keypad_data imx25_imx_keypad_data __initconst; +#define imx25_add_imx_keypad(pdata) \ + imx_add_imx_keypad(&imx25_imx_keypad_data, pdata) + extern const struct imx_imx_ssi_data imx25_imx_ssi_data[] __initconst; #define imx25_add_imx_ssi(id, pdata) \ imx_add_imx_ssi(&imx25_imx_ssi_data[id], pdata) @@ -38,17 +59,29 @@ extern const struct imx_imx_uart_1irq_data imx25_imx_uart_data[] __initconst; #define imx25_add_imx_uart3(pdata) imx25_add_imx_uart(3, pdata) #define imx25_add_imx_uart4(pdata) imx25_add_imx_uart(4, pdata) +extern const struct imx_mx2_camera_data imx25_mx2_camera_data __initconst; +#define imx25_add_mx2_camera(pdata) \ + imx_add_mx2_camera(&imx25_mx2_camera_data, pdata) + +extern const struct imx_mxc_ehci_data imx25_mxc_ehci_otg_data __initconst; +#define imx25_add_mxc_ehci_otg(pdata) \ + imx_add_mxc_ehci(&imx25_mxc_ehci_otg_data, pdata) +extern const struct imx_mxc_ehci_data imx25_mxc_ehci_hs_data __initconst; +#define imx25_add_mxc_ehci_hs(pdata) \ + imx_add_mxc_ehci(&imx25_mxc_ehci_hs_data, pdata) + extern const struct imx_mxc_nand_data imx25_mxc_nand_data __initconst; #define imx25_add_mxc_nand(pdata) \ imx_add_mxc_nand(&imx25_mxc_nand_data, pdata) +extern const struct imx_sdhci_esdhc_imx_data +imx25_sdhci_esdhc_imx_data[] __initconst; +#define imx25_add_sdhci_esdhc_imx(id, pdata) \ + imx_add_sdhci_esdhc_imx(&imx25_sdhci_esdhc_imx_data[id], pdata) + extern const struct imx_spi_imx_data imx25_cspi_data[] __initconst; #define imx25_add_spi_imx(id, pdata) \ - imx_add_spi_imx(&imx25_cspi_data[id], pdata) + imx_add_spi_imx(&imx25_spi_imx_data[id], pdata) #define imx25_add_spi_imx0(pdata) imx25_add_spi_imx(0, pdata) #define imx25_add_spi_imx1(pdata) imx25_add_spi_imx(1, pdata) #define imx25_add_spi_imx2(pdata) imx25_add_spi_imx(2, pdata) - -extern const struct imx_esdhc_imx_data imx25_esdhc_data[] __initconst; -#define imx25_add_esdhc(id, pdata) \ - imx_add_esdhc(&imx25_esdhc_data[id], pdata) diff --git a/arch/arm/mach-imx/devices-imx27.h b/arch/arm/mach-imx/devices-imx27.h index 7011690364f..f1272d4b5a3 100644 --- a/arch/arm/mach-imx/devices-imx27.h +++ b/arch/arm/mach-imx/devices-imx27.h @@ -13,10 +13,26 @@ extern const struct imx_fec_data imx27_fec_data __initconst; #define imx27_add_fec(pdata) \ imx_add_fec(&imx27_fec_data, pdata) +extern const struct imx_fsl_usb2_udc_data imx27_fsl_usb2_udc_data __initconst; +#define imx27_add_fsl_usb2_udc(pdata) \ + imx_add_fsl_usb2_udc(&imx27_fsl_usb2_udc_data, pdata) + +extern const struct imx_imx2_wdt_data imx27_imx2_wdt_data __initconst; +#define imx27_add_imx2_wdt(pdata) \ + imx_add_imx2_wdt(&imx27_imx2_wdt_data) + +extern const struct imx_imx_fb_data imx27_imx_fb_data __initconst; +#define imx27_add_imx_fb(pdata) \ + imx_add_imx_fb(&imx27_imx_fb_data, pdata) + extern const struct imx_imx_i2c_data imx27_imx_i2c_data[] __initconst; #define imx27_add_imx_i2c(id, pdata) \ imx_add_imx_i2c(&imx27_imx_i2c_data[id], pdata) +extern const struct imx_imx_keypad_data imx27_imx_keypad_data __initconst; +#define imx27_add_imx_keypad(pdata) \ + imx_add_imx_keypad(&imx27_imx_keypad_data, pdata) + extern const struct imx_imx_ssi_data imx27_imx_ssi_data[] __initconst; #define imx27_add_imx_ssi(id, pdata) \ imx_add_imx_ssi(&imx27_imx_ssi_data[id], pdata) @@ -31,10 +47,29 @@ extern const struct imx_imx_uart_1irq_data imx27_imx_uart_data[] __initconst; #define imx27_add_imx_uart4(pdata) imx27_add_imx_uart(4, pdata) #define imx27_add_imx_uart5(pdata) imx27_add_imx_uart(5, pdata) +extern const struct imx_mx2_camera_data imx27_mx2_camera_data __initconst; +#define imx27_add_mx2_camera(pdata) \ + imx_add_mx2_camera(&imx27_mx2_camera_data, pdata) + +extern const struct imx_mxc_ehci_data imx27_mxc_ehci_otg_data __initconst; +#define imx27_add_mxc_ehci_otg(pdata) \ + imx_add_mxc_ehci(&imx27_mxc_ehci_otg_data, pdata) +extern const struct imx_mxc_ehci_data imx27_mxc_ehci_hs_data[] __initconst; +#define imx27_add_mxc_ehci_hs(id, pdata) \ + imx_add_mxc_ehci(&imx27_mxc_ehci_hs_data[id - 1], pdata) + +extern const struct imx_mxc_mmc_data imx27_mxc_mmc_data[] __initconst; +#define imx27_add_mxc_mmc(id, pdata) \ + imx_add_mxc_mmc(&imx27_mxc_mmc_data[id], pdata) + extern const struct imx_mxc_nand_data imx27_mxc_nand_data __initconst; #define imx27_add_mxc_nand(pdata) \ imx_add_mxc_nand(&imx27_mxc_nand_data, pdata) +extern const struct imx_mxc_w1_data imx27_mxc_w1_data __initconst; +#define imx27_add_mxc_w1(pdata) \ + imx_add_mxc_w1(&imx27_mxc_w1_data) + extern const struct imx_spi_imx_data imx27_cspi_data[] __initconst; #define imx27_add_cspi(id, pdata) \ imx_add_spi_imx(&imx27_cspi_data[id], pdata) diff --git a/arch/arm/mach-imx/devices.c b/arch/arm/mach-imx/devices.c deleted file mode 100644 index fba5047de8b..00000000000 --- a/arch/arm/mach-imx/devices.c +++ /dev/null @@ -1,553 +0,0 @@ -/* - * Author: MontaVista Software, Inc. - * <source@mvista.com> - * - * Based on the OMAP devices.c - * - * 2005 (c) MontaVista Software, Inc. This file is licensed under the - * terms of the GNU General Public License version 2. This program is - * licensed "as is" without any warranty of any kind, whether express - * or implied. - * - * Copyright 2006-2007 Freescale Semiconductor, Inc. All Rights Reserved. - * Copyright 2008 Juergen Beisert, kernel@pengutronix.de - * Copyright 2008 Sascha Hauer, kernel@pengutronix.de - * Copyright (c) 2008 Paulius Zaleckas <paulius.zaleckas@teltonika.lt> - * Copyright (c) 2008 Darius Augulis <darius.augulis@teltonika.lt> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - * MA 02110-1301, USA. - */ -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/gpio.h> -#include <linux/dma-mapping.h> -#include <linux/serial.h> - -#include <mach/irqs.h> -#include <mach/hardware.h> -#include <mach/common.h> -#include <mach/mmc.h> - -#include "devices.h" - -#if defined(CONFIG_ARCH_MX1) -static struct resource imx1_camera_resources[] = { - { - .start = 0x00224000, - .end = 0x00224010, - .flags = IORESOURCE_MEM, - }, { - .start = MX1_CSI_INT, - .end = MX1_CSI_INT, - .flags = IORESOURCE_IRQ, - }, -}; - -static u64 imx1_camera_dmamask = DMA_BIT_MASK(32); - -struct platform_device imx1_camera_device = { - .name = "mx1-camera", - .id = 0, /* This is used to put cameras on this interface */ - .dev = { - .dma_mask = &imx1_camera_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, - .resource = imx1_camera_resources, - .num_resources = ARRAY_SIZE(imx1_camera_resources), -}; - -static struct resource imx_rtc_resources[] = { - { - .start = 0x00204000, - .end = 0x00204024, - .flags = IORESOURCE_MEM, - }, { - .start = MX1_RTC_INT, - .end = MX1_RTC_INT, - .flags = IORESOURCE_IRQ, - }, { - .start = MX1_RTC_SAMINT, - .end = MX1_RTC_SAMINT, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device imx_rtc_device = { - .name = "rtc-imx", - .id = 0, - .resource = imx_rtc_resources, - .num_resources = ARRAY_SIZE(imx_rtc_resources), -}; - -static struct resource imx_wdt_resources[] = { - { - .start = 0x00201000, - .end = 0x00201008, - .flags = IORESOURCE_MEM, - }, { - .start = MX1_WDT_INT, - .end = MX1_WDT_INT, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device imx_wdt_device = { - .name = "imx-wdt", - .id = 0, - .resource = imx_wdt_resources, - .num_resources = ARRAY_SIZE(imx_wdt_resources), -}; - -static struct resource imx_usb_resources[] = { - { - .start = 0x00212000, - .end = 0x00212148, - .flags = IORESOURCE_MEM, - }, { - .start = MX1_USBD_INT0, - .end = MX1_USBD_INT0, - .flags = IORESOURCE_IRQ, - }, { - .start = MX1_USBD_INT1, - .end = MX1_USBD_INT1, - .flags = IORESOURCE_IRQ, - }, { - .start = MX1_USBD_INT2, - .end = MX1_USBD_INT2, - .flags = IORESOURCE_IRQ, - }, { - .start = MX1_USBD_INT3, - .end = MX1_USBD_INT3, - .flags = IORESOURCE_IRQ, - }, { - .start = MX1_USBD_INT4, - .end = MX1_USBD_INT4, - .flags = IORESOURCE_IRQ, - }, { - .start = MX1_USBD_INT5, - .end = MX1_USBD_INT5, - .flags = IORESOURCE_IRQ, - }, { - .start = MX1_USBD_INT6, - .end = MX1_USBD_INT6, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device imx_usb_device = { - .name = "imx_udc", - .id = 0, - .num_resources = ARRAY_SIZE(imx_usb_resources), - .resource = imx_usb_resources, -}; - -/* GPIO port description */ -static struct mxc_gpio_port imx_gpio_ports[] = { - { - .chip.label = "gpio-0", - .base = (void __iomem *)MX1_IO_ADDRESS(MX1_GPIO_BASE_ADDR), - .irq = MX1_GPIO_INT_PORTA, - .virtual_irq_start = MXC_GPIO_IRQ_START, - }, { - .chip.label = "gpio-1", - .base = (void __iomem *)MX1_IO_ADDRESS(MX1_GPIO_BASE_ADDR + 0x100), - .irq = MX1_GPIO_INT_PORTB, - .virtual_irq_start = MXC_GPIO_IRQ_START + 32, - }, { - .chip.label = "gpio-2", - .base = (void __iomem *)MX1_IO_ADDRESS(MX1_GPIO_BASE_ADDR + 0x200), - .irq = MX1_GPIO_INT_PORTC, - .virtual_irq_start = MXC_GPIO_IRQ_START + 64, - }, { - .chip.label = "gpio-3", - .base = (void __iomem *)MX1_IO_ADDRESS(MX1_GPIO_BASE_ADDR + 0x300), - .irq = MX1_GPIO_INT_PORTD, - .virtual_irq_start = MXC_GPIO_IRQ_START + 96, - } -}; - -int __init imx1_register_gpios(void) -{ - return mxc_gpio_init(imx_gpio_ports, ARRAY_SIZE(imx_gpio_ports)); -} -#endif - -#if defined(CONFIG_MACH_MX21) || defined(CONFIG_MACH_MX27) - -#ifdef CONFIG_MACH_MX27 -static struct resource mx27_camera_resources[] = { - { - .start = MX27_CSI_BASE_ADDR, - .end = MX27_CSI_BASE_ADDR + 0x1f, - .flags = IORESOURCE_MEM, - }, { - .start = MX27_EMMA_PRP_BASE_ADDR, - .end = MX27_EMMA_PRP_BASE_ADDR + 0x1f, - .flags = IORESOURCE_MEM, - }, { - .start = MX27_INT_CSI, - .end = MX27_INT_CSI, - .flags = IORESOURCE_IRQ, - },{ - .start = MX27_INT_EMMAPRP, - .end = MX27_INT_EMMAPRP, - .flags = IORESOURCE_IRQ, - }, -}; -struct platform_device mx27_camera_device = { - .name = "mx2-camera", - .id = 0, - .num_resources = ARRAY_SIZE(mx27_camera_resources), - .resource = mx27_camera_resources, - .dev = { - .coherent_dma_mask = 0xffffffff, - }, -}; -#endif - -/* - * General Purpose Timer - * - i.MX21: 3 timers - * - i.MX27: 6 timers - */ -#define DEFINE_IMX_GPT_DEVICE(n, baseaddr, irq) \ - static struct resource timer ## n ##_resources[] = { \ - { \ - .start = baseaddr, \ - .end = baseaddr + SZ_4K - 1, \ - .flags = IORESOURCE_MEM, \ - }, { \ - .start = irq, \ - .end = irq, \ - .flags = IORESOURCE_IRQ, \ - } \ - }; \ - \ - struct platform_device mxc_gpt ## n = { \ - .name = "imx_gpt", \ - .id = n, \ - .num_resources = ARRAY_SIZE(timer ## n ## _resources), \ - .resource = timer ## n ## _resources, \ - } - -/* We use gpt1 as system timer, so do not add a device for this one */ -DEFINE_IMX_GPT_DEVICE(1, MX2x_GPT2_BASE_ADDR, MX2x_INT_GPT2); -DEFINE_IMX_GPT_DEVICE(2, MX2x_GPT3_BASE_ADDR, MX2x_INT_GPT3); - -#ifdef CONFIG_MACH_MX27 -DEFINE_IMX_GPT_DEVICE(3, MX27_GPT4_BASE_ADDR, MX27_INT_GPT4); -DEFINE_IMX_GPT_DEVICE(4, MX27_GPT5_BASE_ADDR, MX27_INT_GPT5); -DEFINE_IMX_GPT_DEVICE(5, MX27_GPT6_BASE_ADDR, MX27_INT_GPT6); -#endif - -/* Watchdog: i.MX1 has seperate driver, i.MX21 and i.MX27 are equal */ -static struct resource mxc_wdt_resources[] = { - { - .start = MX2x_WDOG_BASE_ADDR, - .end = MX2x_WDOG_BASE_ADDR + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, -}; - -struct platform_device mxc_wdt = { - .name = "imx2-wdt", - .id = 0, - .num_resources = ARRAY_SIZE(mxc_wdt_resources), - .resource = mxc_wdt_resources, -}; - -static struct resource mxc_w1_master_resources[] = { - { - .start = MX2x_OWIRE_BASE_ADDR, - .end = MX2x_OWIRE_BASE_ADDR + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, -}; - -struct platform_device mxc_w1_master_device = { - .name = "mxc_w1", - .id = 0, - .num_resources = ARRAY_SIZE(mxc_w1_master_resources), - .resource = mxc_w1_master_resources, -}; - -/* - * lcdc: - * - i.MX1: the basic controller - * - i.MX21: to be checked - * - i.MX27: like i.MX1, with slightly variations - */ -static struct resource mxc_fb[] = { - { - .start = MX2x_LCDC_BASE_ADDR, - .end = MX2x_LCDC_BASE_ADDR + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, { - .start = MX2x_INT_LCDC, - .end = MX2x_INT_LCDC, - .flags = IORESOURCE_IRQ, - } -}; - -/* mxc lcd driver */ -struct platform_device mxc_fb_device = { - .name = "imx-fb", - .id = 0, - .num_resources = ARRAY_SIZE(mxc_fb), - .resource = mxc_fb, - .dev = { - .coherent_dma_mask = DMA_BIT_MASK(32), - }, -}; - -static struct resource mxc_pwm_resources[] = { - { - .start = MX2x_PWM_BASE_ADDR, - .end = MX2x_PWM_BASE_ADDR + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, { - .start = MX2x_INT_PWM, - .end = MX2x_INT_PWM, - .flags = IORESOURCE_IRQ, - } -}; - -struct platform_device mxc_pwm_device = { - .name = "mxc_pwm", - .id = 0, - .num_resources = ARRAY_SIZE(mxc_pwm_resources), - .resource = mxc_pwm_resources, -}; - -#define DEFINE_MXC_MMC_DEVICE(n, baseaddr, irq, dmareq) \ - static struct resource mxc_sdhc_resources ## n[] = { \ - { \ - .start = baseaddr, \ - .end = baseaddr + SZ_4K - 1, \ - .flags = IORESOURCE_MEM, \ - }, { \ - .start = irq, \ - .end = irq, \ - .flags = IORESOURCE_IRQ, \ - }, { \ - .start = dmareq, \ - .end = dmareq, \ - .flags = IORESOURCE_DMA, \ - }, \ - }; \ - \ - static u64 mxc_sdhc ## n ## _dmamask = DMA_BIT_MASK(32); \ - \ - struct platform_device mxc_sdhc_device ## n = { \ - .name = "mxc-mmc", \ - .id = n, \ - .dev = { \ - .dma_mask = &mxc_sdhc ## n ## _dmamask, \ - .coherent_dma_mask = DMA_BIT_MASK(32), \ - }, \ - .num_resources = ARRAY_SIZE(mxc_sdhc_resources ## n), \ - .resource = mxc_sdhc_resources ## n, \ - } - -DEFINE_MXC_MMC_DEVICE(0, MX2x_SDHC1_BASE_ADDR, MX2x_INT_SDHC1, MX2x_DMA_REQ_SDHC1); -DEFINE_MXC_MMC_DEVICE(1, MX2x_SDHC2_BASE_ADDR, MX2x_INT_SDHC2, MX2x_DMA_REQ_SDHC2); - -#ifdef CONFIG_MACH_MX27 -static struct resource otg_resources[] = { - { - .start = MX27_USBOTG_BASE_ADDR, - .end = MX27_USBOTG_BASE_ADDR + 0x1ff, - .flags = IORESOURCE_MEM, - }, { - .start = MX27_INT_USB3, - .end = MX27_INT_USB3, - .flags = IORESOURCE_IRQ, - }, -}; - -static u64 otg_dmamask = DMA_BIT_MASK(32); - -/* OTG gadget device */ -struct platform_device mxc_otg_udc_device = { - .name = "fsl-usb2-udc", - .id = -1, - .dev = { - .dma_mask = &otg_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, - .resource = otg_resources, - .num_resources = ARRAY_SIZE(otg_resources), -}; - -/* OTG host */ -struct platform_device mxc_otg_host = { - .name = "mxc-ehci", - .id = 0, - .dev = { - .coherent_dma_mask = DMA_BIT_MASK(32), - .dma_mask = &otg_dmamask, - }, - .resource = otg_resources, - .num_resources = ARRAY_SIZE(otg_resources), -}; - -/* USB host 1 */ - -static u64 usbh1_dmamask = DMA_BIT_MASK(32); - -static struct resource mxc_usbh1_resources[] = { - { - .start = MX27_USBOTG_BASE_ADDR + 0x200, - .end = MX27_USBOTG_BASE_ADDR + 0x3ff, - .flags = IORESOURCE_MEM, - }, { - .start = MX27_INT_USB1, - .end = MX27_INT_USB1, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device mxc_usbh1 = { - .name = "mxc-ehci", - .id = 1, - .dev = { - .coherent_dma_mask = DMA_BIT_MASK(32), - .dma_mask = &usbh1_dmamask, - }, - .resource = mxc_usbh1_resources, - .num_resources = ARRAY_SIZE(mxc_usbh1_resources), -}; - -/* USB host 2 */ -static u64 usbh2_dmamask = DMA_BIT_MASK(32); - -static struct resource mxc_usbh2_resources[] = { - { - .start = MX27_USBOTG_BASE_ADDR + 0x400, - .end = MX27_USBOTG_BASE_ADDR + 0x5ff, - .flags = IORESOURCE_MEM, - }, { - .start = MX27_INT_USB2, - .end = MX27_INT_USB2, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device mxc_usbh2 = { - .name = "mxc-ehci", - .id = 2, - .dev = { - .coherent_dma_mask = DMA_BIT_MASK(32), - .dma_mask = &usbh2_dmamask, - }, - .resource = mxc_usbh2_resources, - .num_resources = ARRAY_SIZE(mxc_usbh2_resources), -}; -#endif - -/* GPIO port description */ -#define DEFINE_MXC_GPIO_PORT_IRQ(SOC, n, _irq) \ - { \ - .chip.label = "gpio-" #n, \ - .irq = _irq, \ - .base = SOC ## _IO_ADDRESS(MX2x_GPIO_BASE_ADDR + \ - n * 0x100), \ - .virtual_irq_start = MXC_GPIO_IRQ_START + n * 32, \ - } - -#define DEFINE_MXC_GPIO_PORT(SOC, n) \ - { \ - .chip.label = "gpio-" #n, \ - .base = SOC ## _IO_ADDRESS(MX2x_GPIO_BASE_ADDR + \ - n * 0x100), \ - .virtual_irq_start = MXC_GPIO_IRQ_START + n * 32, \ - } - -#define DEFINE_MXC_GPIO_PORTS(SOC, pfx) \ - static struct mxc_gpio_port pfx ## _gpio_ports[] = { \ - DEFINE_MXC_GPIO_PORT_IRQ(SOC, 0, SOC ## _INT_GPIO), \ - DEFINE_MXC_GPIO_PORT(SOC, 1), \ - DEFINE_MXC_GPIO_PORT(SOC, 2), \ - DEFINE_MXC_GPIO_PORT(SOC, 3), \ - DEFINE_MXC_GPIO_PORT(SOC, 4), \ - DEFINE_MXC_GPIO_PORT(SOC, 5), \ - } - -#ifdef CONFIG_MACH_MX21 -DEFINE_MXC_GPIO_PORTS(MX21, imx21); - -int __init imx21_register_gpios(void) -{ - return mxc_gpio_init(imx21_gpio_ports, ARRAY_SIZE(imx21_gpio_ports)); -} -#endif - -#ifdef CONFIG_MACH_MX27 -DEFINE_MXC_GPIO_PORTS(MX27, imx27); - -int __init imx27_register_gpios(void) -{ - return mxc_gpio_init(imx27_gpio_ports, ARRAY_SIZE(imx27_gpio_ports)); -} -#endif - -#ifdef CONFIG_MACH_MX21 -static struct resource mx21_usbhc_resources[] = { - { - .start = MX21_USBOTG_BASE_ADDR, - .end = MX21_USBOTG_BASE_ADDR + SZ_8K - 1, - .flags = IORESOURCE_MEM, - }, - { - .start = MX21_INT_USBHOST, - .end = MX21_INT_USBHOST, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device mx21_usbhc_device = { - .name = "imx21-hcd", - .id = 0, - .dev = { - .dma_mask = &mx21_usbhc_device.dev.coherent_dma_mask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, - .num_resources = ARRAY_SIZE(mx21_usbhc_resources), - .resource = mx21_usbhc_resources, -}; -#endif - -static struct resource imx_kpp_resources[] = { - { - .start = MX2x_KPP_BASE_ADDR, - .end = MX2x_KPP_BASE_ADDR + 0xf, - .flags = IORESOURCE_MEM - }, { - .start = MX2x_INT_KPP, - .end = MX2x_INT_KPP, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device imx_kpp_device = { - .name = "imx-keypad", - .id = -1, - .num_resources = ARRAY_SIZE(imx_kpp_resources), - .resource = imx_kpp_resources, -}; - -#endif diff --git a/arch/arm/mach-imx/devices.h b/arch/arm/mach-imx/devices.h deleted file mode 100644 index 807f02a031c..00000000000 --- a/arch/arm/mach-imx/devices.h +++ /dev/null @@ -1,29 +0,0 @@ -#ifdef CONFIG_ARCH_MX1 -extern struct platform_device imx1_camera_device; -extern struct platform_device imx_rtc_device; -extern struct platform_device imx_wdt_device; -extern struct platform_device imx_usb_device; -#endif - -#if defined(CONFIG_MACH_MX21) || defined(CONFIG_MACH_MX27) -extern struct platform_device mxc_gpt1; -extern struct platform_device mxc_gpt2; -#ifdef CONFIG_MACH_MX27 -extern struct platform_device mxc_gpt3; -extern struct platform_device mxc_gpt4; -extern struct platform_device mxc_gpt5; -#endif -extern struct platform_device mxc_wdt; -extern struct platform_device mxc_w1_master_device; -extern struct platform_device mxc_fb_device; -extern struct platform_device mxc_pwm_device; -extern struct platform_device mxc_sdhc_device0; -extern struct platform_device mxc_sdhc_device1; -extern struct platform_device mxc_otg_udc_device; -extern struct platform_device mx27_camera_device; -extern struct platform_device mxc_otg_host; -extern struct platform_device mxc_usbh1; -extern struct platform_device mxc_usbh2; -extern struct platform_device mx21_usbhc_device; -extern struct platform_device imx_kpp_device; -#endif diff --git a/arch/arm/mach-imx/dma-v1.c b/arch/arm/mach-imx/dma-v1.c index 3e8c47c63ba..e9f1769b49f 100644 --- a/arch/arm/mach-imx/dma-v1.c +++ b/arch/arm/mach-imx/dma-v1.c @@ -818,9 +818,11 @@ static int __init imx_dma_init(void) imx_dmav1_baseaddr = MX27_IO_ADDRESS(MX27_DMA_BASE_ADDR); else #endif - BUG(); + return 0; dma_clk = clk_get(NULL, "dma"); + if (IS_ERR(dma_clk)) + return PTR_ERR(dma_clk); clk_enable(dma_clk); /* reset DMA module */ diff --git a/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c b/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c index 7e1e9dc2c8f..275c8589d79 100644 --- a/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c +++ b/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c @@ -26,20 +26,16 @@ #include <linux/spi/ads7846.h> #include <linux/backlight.h> #include <video/platform_lcd.h> -#include <linux/input/matrix_keypad.h> #include <asm/mach/arch.h> #include <mach/common.h> #include <mach/iomux-mx27.h> -#include <mach/imxfb.h> #include <mach/hardware.h> -#include <mach/mmc.h> #include <mach/spi.h> #include <mach/audmux.h> #include "devices-imx27.h" -#include "devices.h" static const int eukrea_mbimx27_pins[] __initconst = { /* UART2 */ @@ -111,7 +107,8 @@ static const uint32_t eukrea_mbimx27_keymap[] = { KEY(1, 1, KEY_LEFT), }; -static struct matrix_keymap_data eukrea_mbimx27_keymap_data = { +static const struct matrix_keymap_data +eukrea_mbimx27_keymap_data __initconst = { .keymap = eukrea_mbimx27_keymap, .keymap_size = ARRAY_SIZE(eukrea_mbimx27_keymap), }; @@ -196,7 +193,7 @@ static struct imx_fb_videomode eukrea_mbimx27_modes[] = { }, }; -static struct imx_fb_platform_data eukrea_mbimx27_fb_data = { +static const struct imx_fb_platform_data eukrea_mbimx27_fb_data __initconst = { .mode = eukrea_mbimx27_modes, .num_modes = ARRAY_SIZE(eukrea_mbimx27_modes), @@ -300,7 +297,7 @@ static struct platform_device *platform_devices[] __initdata = { &leds_gpio, }; -static struct imxmmc_platform_data sdhc_pdata = { +static const struct imxmmc_platform_data sdhc_pdata __initconst = { .dat3_card_detect = 1, }; @@ -345,8 +342,8 @@ void __init eukrea_mbimx27_baseboard_init(void) imx27_add_imx_uart3(&uart_pdata); #endif - mxc_register_device(&mxc_fb_device, &eukrea_mbimx27_fb_data); - mxc_register_device(&mxc_sdhc_device0, &sdhc_pdata); + imx27_add_imx_fb(&eukrea_mbimx27_fb_data); + imx27_add_mxc_mmc(0, &sdhc_pdata); i2c_register_board_info(0, eukrea_mbimx27_i2c_devices, ARRAY_SIZE(eukrea_mbimx27_i2c_devices)); @@ -380,7 +377,7 @@ void __init eukrea_mbimx27_baseboard_init(void) gpio_request(GPIO_PORTA | 25, "lcd_enable"); platform_device_register(&eukrea_mbimx27_lcd_powerdev); - mxc_register_device(&imx_kpp_device, &eukrea_mbimx27_keymap_data); + imx27_add_imx_keypad(&eukrea_mbimx27_keymap_data); platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); } diff --git a/arch/arm/mach-mx25/eukrea_mbimxsd-baseboard.c b/arch/arm/mach-imx/eukrea_mbimxsd25-baseboard.c index e765ac5d9a0..cb705c28de0 100644 --- a/arch/arm/mach-mx25/eukrea_mbimxsd-baseboard.c +++ b/arch/arm/mach-imx/eukrea_mbimxsd25-baseboard.c @@ -33,13 +33,11 @@ #include <asm/mach/arch.h> #include <mach/mx25.h> #include <mach/imx-uart.h> -#include <mach/imxfb.h> #include <mach/audmux.h> #include "devices-imx25.h" -#include "devices.h" -static struct pad_desc eukrea_mbimxsd_pads[] = { +static iomux_v3_cfg_t eukrea_mbimxsd_pads[] = { /* LCD */ MX25_PAD_LD0__LD0, MX25_PAD_LD1__LD1, @@ -151,7 +149,7 @@ static struct imx_fb_videomode eukrea_mximxsd_modes[] = { }, }; -static struct imx_fb_platform_data eukrea_mximxsd_fb_pdata = { +static const struct imx_fb_platform_data eukrea_mximxsd_fb_pdata __initconst = { .mode = eukrea_mximxsd_modes, .num_modes = ARRAY_SIZE(eukrea_mximxsd_modes), .pwmr = 0x00A903FF, @@ -273,11 +271,11 @@ void __init eukrea_mbimxsd25_baseboard_init(void) #endif imx25_add_imx_uart1(&uart_pdata); - mxc_register_device(&mx25_fb_device, &eukrea_mximxsd_fb_pdata); + imx25_add_imx_fb(&eukrea_mximxsd_fb_pdata); imx25_add_imx_ssi(0, &eukrea_mbimxsd_ssi_pdata); imx25_add_flexcan1(NULL); - imx25_add_esdhc(0, NULL); + imx25_add_sdhci_esdhc_imx(0, NULL); gpio_request(GPIO_LED1, "LED1"); gpio_direction_output(GPIO_LED1, 1); diff --git a/arch/arm/mach-imx/mach-cpuimx27.c b/arch/arm/mach-imx/mach-cpuimx27.c index 745ee60fb06..6cf04da2456 100644 --- a/arch/arm/mach-imx/mach-cpuimx27.c +++ b/arch/arm/mach-imx/mach-cpuimx27.c @@ -28,7 +28,6 @@ #include <linux/serial_8250.h> #include <linux/usb/otg.h> #include <linux/usb/ulpi.h> -#include <linux/fsl_devices.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -40,11 +39,9 @@ #include <mach/hardware.h> #include <mach/iomux-mx27.h> #include <mach/mxc_nand.h> -#include <mach/mxc_ehci.h> #include <mach/ulpi.h> #include "devices-imx27.h" -#include "devices.h" static const int eukrea_cpuimx27_pins[] __initconst = { /* UART1 */ @@ -157,8 +154,6 @@ cpuimx27_nand_board_info __initconst = { static struct platform_device *platform_devices[] __initdata = { &eukrea_cpuimx27_nor_mtd_device, - &mxc_wdt, - &mxc_w1_master_device, }; static const struct imxi2c_platform_data cpuimx27_i2c1_data __initconst = { @@ -215,18 +210,18 @@ static struct platform_device serial_device = { #endif #if defined(CONFIG_USB_ULPI) -static struct mxc_usbh_platform_data otg_pdata = { +static struct mxc_usbh_platform_data otg_pdata __initdata = { .portsc = MXC_EHCI_MODE_ULPI, .flags = MXC_EHCI_INTERFACE_DIFF_UNI, }; -static struct mxc_usbh_platform_data usbh2_pdata = { +static struct mxc_usbh_platform_data usbh2_pdata __initdata = { .portsc = MXC_EHCI_MODE_ULPI, .flags = MXC_EHCI_INTERFACE_DIFF_UNI, }; #endif -static struct fsl_usb2_platform_data otg_device_pdata = { +static const struct fsl_usb2_platform_data otg_device_pdata __initconst = { .operating_mode = FSL_USB2_DR_DEVICE, .phy_mode = FSL_USB2_PHY_ULPI, }; @@ -262,10 +257,12 @@ static void __init eukrea_cpuimx27_init(void) imx27_add_fec(NULL); platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); + imx27_add_imx2_wdt(NULL); + imx27_add_mxc_w1(NULL); #if defined(CONFIG_MACH_EUKREA_CPUIMX27_USESDHC2) /* SDHC2 can be used for Wifi */ - mxc_register_device(&mxc_sdhc_device1, NULL); + imx27_add_mxc_mmc(1, NULL); #endif #if defined(MACH_EUKREA_CPUIMX27_USEUART4) /* in which case UART4 is also used for Bluetooth */ @@ -281,16 +278,16 @@ static void __init eukrea_cpuimx27_init(void) otg_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops, ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT); - mxc_register_device(&mxc_otg_host, &otg_pdata); + imx27_add_mxc_ehci_otg(&otg_pdata); } usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops, ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT); - mxc_register_device(&mxc_usbh2, &usbh2_pdata); + imx27_add_mxc_ehci_hs(2, &usbh2_pdata); #endif if (!otg_mode_host) - mxc_register_device(&mxc_otg_udc_device, &otg_device_pdata); + imx27_add_fsl_usb2_udc(&otg_device_pdata); #ifdef CONFIG_MACH_EUKREA_MBIMX27_BASEBOARD eukrea_mbimx27_baseboard_init(); diff --git a/arch/arm/mach-mx25/mach-cpuimx25.c b/arch/arm/mach-imx/mach-eukrea_cpuimx25.c index f6f9ad60c25..eb395aba923 100644 --- a/arch/arm/mach-mx25/mach-cpuimx25.c +++ b/arch/arm/mach-imx/mach-eukrea_cpuimx25.c @@ -26,7 +26,6 @@ #include <linux/platform_device.h> #include <linux/usb/otg.h> #include <linux/usb/ulpi.h> -#include <linux/fsl_devices.h> #include <mach/eukrea-baseboards.h> #include <mach/hardware.h> @@ -39,17 +38,15 @@ #include <mach/mx25.h> #include <mach/mxc_nand.h> #include <mach/imxfb.h> -#include <mach/mxc_ehci.h> #include <mach/iomux-mx25.h> #include "devices-imx25.h" -#include "devices.h" static const struct imxuart_platform_data uart_pdata __initconst = { .flags = IMXUART_HAVE_RTSCTS, }; -static struct pad_desc eukrea_cpuimx25_pads[] = { +static iomux_v3_cfg_t eukrea_cpuimx25_pads[] = { /* FEC - RMII */ MX25_PAD_FEC_MDC__FEC_MDC, MX25_PAD_FEC_MDIO__FEC_MDIO, @@ -87,18 +84,18 @@ static struct i2c_board_info eukrea_cpuimx25_i2c_devices[] = { }, }; -static struct mxc_usbh_platform_data otg_pdata = { +static const struct mxc_usbh_platform_data otg_pdata __initconst = { .portsc = MXC_EHCI_MODE_UTMI, .flags = MXC_EHCI_INTERFACE_DIFF_UNI, }; -static struct mxc_usbh_platform_data usbh2_pdata = { +static const struct mxc_usbh_platform_data usbh2_pdata __initconst = { .portsc = MXC_EHCI_MODE_SERIAL, .flags = MXC_EHCI_INTERFACE_SINGLE_UNI | MXC_EHCI_INTERNAL_PHY | MXC_EHCI_IPPUE_DOWN, }; -static struct fsl_usb2_platform_data otg_device_pdata = { +static const struct fsl_usb2_platform_data otg_device_pdata __initconst = { .operating_mode = FSL_USB2_DR_DEVICE, .phy_mode = FSL_USB2_PHY_UTMI, }; @@ -126,7 +123,7 @@ static void __init eukrea_cpuimx25_init(void) imx25_add_imx_uart0(&uart_pdata); imx25_add_mxc_nand(&eukrea_cpuimx25_nand_board_info); - mxc_register_device(&mx25_rtc_device, NULL); + imx25_add_imxdi_rtc(NULL); imx25_add_fec(&mx25_fec_pdata); i2c_register_board_info(0, eukrea_cpuimx25_i2c_devices, @@ -134,11 +131,11 @@ static void __init eukrea_cpuimx25_init(void) imx25_add_imx_i2c0(&eukrea_cpuimx25_i2c0_data); if (otg_mode_host) - mxc_register_device(&mxc_otg, &otg_pdata); + imx25_add_mxc_ehci_otg(&otg_pdata); else - mxc_register_device(&otg_udc_device, &otg_device_pdata); + imx25_add_fsl_usb2_udc(&otg_device_pdata); - mxc_register_device(&mxc_usbh2, &usbh2_pdata); + imx25_add_mxc_ehci_hs(&usbh2_pdata); #ifdef CONFIG_MACH_EUKREA_MBIMXSD25_BASEBOARD eukrea_mbimxsd25_baseboard_init(); diff --git a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c index 59716fab586..40a3666ea63 100644 --- a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c +++ b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c @@ -34,12 +34,9 @@ #include <asm/mach/arch.h> #include <asm/mach/time.h> #include <mach/common.h> -#include <mach/mmc.h> #include <mach/iomux.h> -#include <mach/mxc_ehci.h> #include "devices-imx27.h" -#include "devices.h" #define OTG_PHY_CS_GPIO (GPIO_PORTF + 17) #define SDHC1_IRQ IRQ_GPIOB(25) @@ -156,7 +153,7 @@ static void visstrim_m10_sdhc1_exit(struct device *dev, void *data) free_irq(SDHC1_IRQ, data); } -static struct imxmmc_platform_data visstrim_m10_sdhc_pdata = { +static const struct imxmmc_platform_data visstrim_m10_sdhc_pdata __initconst = { .init = visstrim_m10_sdhc1_init, .exit = visstrim_m10_sdhc1_exit, }; @@ -216,7 +213,8 @@ static int otg_phy_init(struct platform_device *pdev) return 0; } -static struct mxc_usbh_platform_data visstrim_m10_usbotg_pdata = { +static const struct mxc_usbh_platform_data +visstrim_m10_usbotg_pdata __initconst = { .init = otg_phy_init, .portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT, .flags = MXC_EHCI_POWER_PINS_ENABLED, @@ -237,8 +235,8 @@ static void __init visstrim_m10_board_init(void) ARRAY_SIZE(visstrim_m10_i2c_devices)); imx27_add_imx_i2c(0, &visstrim_m10_i2c_data); imx27_add_imx_i2c(1, &visstrim_m10_i2c_data); - mxc_register_device(&mxc_sdhc_device0, &visstrim_m10_sdhc_pdata); - mxc_register_device(&mxc_otg_host, &visstrim_m10_usbotg_pdata); + imx27_add_mxc_mmc(0, &visstrim_m10_sdhc_pdata); + imx27_add_mxc_ehci_otg(&visstrim_m10_usbotg_pdata); imx27_add_fec(NULL); platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); } diff --git a/arch/arm/mach-imx/mach-imx27lite.c b/arch/arm/mach-imx/mach-imx27lite.c index bbdbc75127d..3a1202e4721 100644 --- a/arch/arm/mach-imx/mach-imx27lite.c +++ b/arch/arm/mach-imx/mach-imx27lite.c @@ -25,7 +25,6 @@ #include <mach/iomux-mx27.h> #include "devices-imx27.h" -#include "devices.h" static const int mx27lite_pins[] __initconst = { /* UART1 */ diff --git a/arch/arm/mach-imx/mach-mx1ads.c b/arch/arm/mach-imx/mach-mx1ads.c index 6187ce9ba7d..1f446e5eb63 100644 --- a/arch/arm/mach-imx/mach-mx1ads.c +++ b/arch/arm/mach-imx/mach-mx1ads.c @@ -30,7 +30,6 @@ #include <mach/irqs.h> #include "devices-imx1.h" -#include "devices.h" static const int mx1ads_pins[] __initconst = { /* UART1 */ diff --git a/arch/arm/mach-imx/mach-mx21ads.c b/arch/arm/mach-imx/mach-mx21ads.c index e1282e9f50f..0a372577c2a 100644 --- a/arch/arm/mach-imx/mach-mx21ads.c +++ b/arch/arm/mach-imx/mach-mx21ads.c @@ -24,13 +24,10 @@ #include <asm/mach/arch.h> #include <asm/mach/time.h> #include <asm/mach/map.h> -#include <mach/imxfb.h> #include <mach/iomux-mx21.h> #include <mach/mxc_nand.h> -#include <mach/mmc.h> #include "devices-imx21.h" -#include "devices.h" /* * Memory-mapped I/O on MX21ADS base board @@ -213,7 +210,7 @@ static struct imx_fb_videomode mx21ads_modes[] = { }, }; -static struct imx_fb_platform_data mx21ads_fb_data = { +static const struct imx_fb_platform_data mx21ads_fb_data __initconst = { .mode = mx21ads_modes, .num_modes = ARRAY_SIZE(mx21ads_modes), @@ -233,15 +230,8 @@ static int mx21ads_sdhc_get_ro(struct device *dev) static int mx21ads_sdhc_init(struct device *dev, irq_handler_t detect_irq, void *data) { - int ret; - - ret = request_irq(IRQ_GPIOD(25), detect_irq, + return request_irq(IRQ_GPIOD(25), detect_irq, IRQF_TRIGGER_FALLING, "mmc-detect", data); - if (ret) - goto out; - return 0; -out: - return ret; } static void mx21ads_sdhc_exit(struct device *dev, void *data) @@ -249,7 +239,7 @@ static void mx21ads_sdhc_exit(struct device *dev, void *data) free_irq(IRQ_GPIOD(25), data); } -static struct imxmmc_platform_data mx21ads_sdhc_pdata = { +static const struct imxmmc_platform_data mx21ads_sdhc_pdata __initconst = { .ocr_avail = MMC_VDD_29_30 | MMC_VDD_30_31, /* 3.0V */ .get_ro = mx21ads_sdhc_get_ro, .init = mx21ads_sdhc_init, @@ -296,8 +286,8 @@ static void __init mx21ads_board_init(void) imx21_add_imx_uart0(&uart_pdata_rts); imx21_add_imx_uart2(&uart_pdata_norts); imx21_add_imx_uart3(&uart_pdata_rts); - mxc_register_device(&mxc_fb_device, &mx21ads_fb_data); - mxc_register_device(&mxc_sdhc_device0, &mx21ads_sdhc_pdata); + imx21_add_imx_fb(&mx21ads_fb_data); + imx21_add_mxc_mmc(0, &mx21ads_sdhc_pdata); imx21_add_mxc_nand(&mx21ads_nand_board_info); platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); diff --git a/arch/arm/mach-mx25/mach-mx25_3ds.c b/arch/arm/mach-imx/mach-mx25_3ds.c index f8be1eb0c06..aa76cfd9f34 100644 --- a/arch/arm/mach-mx25/mach-mx25_3ds.c +++ b/arch/arm/mach-imx/mach-mx25_3ds.c @@ -30,6 +30,7 @@ #include <linux/gpio.h> #include <linux/platform_device.h> #include <linux/input/matrix_keypad.h> +#include <linux/usb/otg.h> #include <mach/hardware.h> #include <asm/mach-types.h> @@ -39,17 +40,15 @@ #include <asm/mach/map.h> #include <mach/common.h> #include <mach/mx25.h> -#include <mach/imxfb.h> #include <mach/iomux-mx25.h> #include "devices-imx25.h" -#include "devices.h" static const struct imxuart_platform_data uart_pdata __initconst = { .flags = IMXUART_HAVE_RTSCTS, }; -static struct pad_desc mx25pdk_pads[] = { +static iomux_v3_cfg_t mx25pdk_pads[] = { MX25_PAD_FEC_MDC__FEC_MDC, MX25_PAD_FEC_MDIO__FEC_MDIO, MX25_PAD_FEC_TDATA0__FEC_TDATA0, @@ -107,7 +106,7 @@ static struct pad_desc mx25pdk_pads[] = { }; static const struct fec_platform_data mx25_fec_pdata __initconst = { - .phy = PHY_INTERFACE_MODE_RMII, + .phy = PHY_INTERFACE_MODE_RMII, }; #define FEC_ENABLE_GPIO 35 @@ -154,7 +153,7 @@ static struct imx_fb_videomode mx25pdk_modes[] = { }, }; -static struct imx_fb_platform_data mx25pdk_fb_pdata = { +static const struct imx_fb_platform_data mx25pdk_fb_pdata __initconst = { .mode = mx25pdk_modes, .num_modes = ARRAY_SIZE(mx25pdk_modes), .pwmr = 0x00A903FF, @@ -181,28 +180,39 @@ static const uint32_t mx25pdk_keymap[] = { KEY(3, 3, KEY_POWER), }; -static struct matrix_keymap_data mx25pdk_keymap_data = { +static const struct matrix_keymap_data mx25pdk_keymap_data __initdata = { .keymap = mx25pdk_keymap, .keymap_size = ARRAY_SIZE(mx25pdk_keymap), }; +static const struct mxc_usbh_platform_data usbh2_pdata __initconst = { + .portsc = MXC_EHCI_MODE_SERIAL, + .flags = MXC_EHCI_INTERNAL_PHY, +}; + +static const struct fsl_usb2_platform_data otg_device_pdata __initconst = { + .operating_mode = FSL_USB2_DR_DEVICE, + .phy_mode = FSL_USB2_PHY_UTMI, +}; + static void __init mx25pdk_init(void) { mxc_iomux_v3_setup_multiple_pads(mx25pdk_pads, ARRAY_SIZE(mx25pdk_pads)); imx25_add_imx_uart0(&uart_pdata); - mxc_register_device(&mxc_usbh2, NULL); + imx25_add_fsl_usb2_udc(&otg_device_pdata); + imx25_add_mxc_ehci_hs(&usbh2_pdata); imx25_add_mxc_nand(&mx25pdk_nand_board_info); - mxc_register_device(&mx25_rtc_device, NULL); - mxc_register_device(&mx25_fb_device, &mx25pdk_fb_pdata); - mxc_register_device(&mxc_wdt, NULL); + imx25_add_imxdi_rtc(NULL); + imx25_add_imx_fb(&mx25pdk_fb_pdata); + imx25_add_imx2_wdt(NULL); mx25pdk_fec_reset(); imx25_add_fec(&mx25_fec_pdata); - mxc_register_device(&mx25_kpp_device, &mx25pdk_keymap_data); + imx25_add_imx_keypad(&mx25pdk_keymap_data); - imx25_add_esdhc(0, NULL); + imx25_add_sdhci_esdhc_imx(0, NULL); } static void __init mx25pdk_timer_init(void) diff --git a/arch/arm/mach-imx/mach-mx27_3ds.c b/arch/arm/mach-imx/mach-mx27_3ds.c index 84a5ba03f1b..6fd0f8f6deb 100644 --- a/arch/arm/mach-imx/mach-mx27_3ds.c +++ b/arch/arm/mach-imx/mach-mx27_3ds.c @@ -22,20 +22,27 @@ #include <linux/platform_device.h> #include <linux/gpio.h> -#include <linux/input/matrix_keypad.h> #include <linux/irq.h> +#include <linux/usb/otg.h> +#include <linux/usb/ulpi.h> +#include <linux/delay.h> +#include <linux/mfd/mc13783.h> +#include <linux/spi/spi.h> +#include <linux/regulator/machine.h> + #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/time.h> #include <mach/hardware.h> #include <mach/common.h> #include <mach/iomux-mx27.h> -#include <mach/mmc.h> +#include <mach/ulpi.h> #include "devices-imx27.h" -#include "devices.h" #define SD1_EN_GPIO (GPIO_PORTB + 25) +#define OTG_PHY_RESET_GPIO (GPIO_PORTB + 23) +#define SPI2_SS0 (GPIO_PORTD + 21) static const int mx27pdk_pins[] __initconst = { /* UART1 */ @@ -70,6 +77,24 @@ static const int mx27pdk_pins[] __initconst = { PE22_PF_SD1_CMD, PE23_PF_SD1_CLK, SD1_EN_GPIO | GPIO_GPIO | GPIO_OUT, + /* OTG */ + OTG_PHY_RESET_GPIO | GPIO_GPIO | GPIO_OUT, + PC7_PF_USBOTG_DATA5, + PC8_PF_USBOTG_DATA6, + PC9_PF_USBOTG_DATA0, + PC10_PF_USBOTG_DATA2, + PC11_PF_USBOTG_DATA1, + PC12_PF_USBOTG_DATA4, + PC13_PF_USBOTG_DATA3, + PE0_PF_USBOTG_NXT, + PE1_PF_USBOTG_STP, + PE2_PF_USBOTG_DIR, + PE24_PF_USBOTG_CLK, + PE25_PF_USBOTG_DATA7, + /* CSPI2 */ + PD22_PF_CSPI2_SCLK, + PD23_PF_CSPI2_MISO, + PD24_PF_CSPI2_MOSI, }; static const struct imxuart_platform_data uart_pdata __initconst = { @@ -92,7 +117,7 @@ static const uint32_t mx27_3ds_keymap[] = { KEY(2, 3, KEY_F10), }; -static struct matrix_keymap_data mx27_3ds_keymap_data = { +static const struct matrix_keymap_data mx27_3ds_keymap_data __initconst = { .keymap = mx27_3ds_keymap, .keymap_size = ARRAY_SIZE(mx27_3ds_keymap), }; @@ -109,7 +134,7 @@ static void mx27_3ds_sdhc1_exit(struct device *dev, void *data) free_irq(IRQ_GPIOB(26), data); } -static struct imxmmc_platform_data sdhc1_pdata = { +static const struct imxmmc_platform_data sdhc1_pdata __initconst = { .init = mx27_3ds_sdhc1_init, .exit = mx27_3ds_sdhc1_exit, }; @@ -121,6 +146,111 @@ static void mx27_3ds_sdhc1_enable_level_translator(void) gpio_direction_output(SD1_EN_GPIO, 1); } + +static int otg_phy_init(void) +{ + gpio_request(OTG_PHY_RESET_GPIO, "usb-otg-reset"); + gpio_direction_output(OTG_PHY_RESET_GPIO, 0); + mdelay(1); + gpio_set_value(OTG_PHY_RESET_GPIO, 1); + return 0; +} + +#if defined(CONFIG_USB_ULPI) + +static struct mxc_usbh_platform_data otg_pdata __initdata = { + .portsc = MXC_EHCI_MODE_ULPI, + .flags = MXC_EHCI_INTERFACE_DIFF_UNI, +}; +#endif + +static const struct fsl_usb2_platform_data otg_device_pdata __initconst = { + .operating_mode = FSL_USB2_DR_DEVICE, + .phy_mode = FSL_USB2_PHY_ULPI, +}; + +static int otg_mode_host; + +static int __init mx27_3ds_otg_mode(char *options) +{ + if (!strcmp(options, "host")) + otg_mode_host = 1; + else if (!strcmp(options, "device")) + otg_mode_host = 0; + else + pr_info("otg_mode neither \"host\" nor \"device\". " + "Defaulting to device\n"); + return 0; +} +__setup("otg_mode=", mx27_3ds_otg_mode); + +/* Regulators */ +static struct regulator_consumer_supply vmmc1_consumers[] = { + REGULATOR_SUPPLY("lcd_2v8", NULL), +}; + +static struct regulator_init_data vmmc1_init = { + .constraints = { + .min_uV = 2800000, + .max_uV = 2800000, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, + }, + .num_consumer_supplies = ARRAY_SIZE(vmmc1_consumers), + .consumer_supplies = vmmc1_consumers, +}; + +static struct regulator_consumer_supply vgen_consumers[] = { + REGULATOR_SUPPLY("vdd_lcdio", NULL), +}; + +static struct regulator_init_data vgen_init = { + .constraints = { + .min_uV = 1800000, + .max_uV = 1800000, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, + }, + .num_consumer_supplies = ARRAY_SIZE(vgen_consumers), + .consumer_supplies = vgen_consumers, +}; + +static struct mc13783_regulator_init_data mx27_3ds_regulators[] = { + { + .id = MC13783_REGU_VMMC1, + .init_data = &vmmc1_init, + }, { + .id = MC13783_REGU_VGEN, + .init_data = &vgen_init, + }, +}; + +/* MC13783 */ +static struct mc13783_platform_data mc13783_pdata __initdata = { + .regulators = mx27_3ds_regulators, + .num_regulators = ARRAY_SIZE(mx27_3ds_regulators), + .flags = MC13783_USE_REGULATOR, +}; + +/* SPI */ +static int spi2_internal_chipselect[] = {SPI2_SS0}; + +static const struct spi_imx_master spi2_pdata __initconst = { + .chipselect = spi2_internal_chipselect, + .num_chipselect = ARRAY_SIZE(spi2_internal_chipselect), +}; + +static struct spi_board_info mx27_3ds_spi_devs[] __initdata = { + { + .modalias = "mc13783", + .max_speed_hz = 1000000, + .bus_num = 1, + .chip_select = 0, /* SS0 */ + .platform_data = &mc13783_pdata, + .irq = IRQ_GPIOC(14), + .mode = SPI_CS_HIGH, + }, +}; + + static void __init mx27pdk_init(void) { mxc_gpio_setup_multiple_pins(mx27pdk_pins, ARRAY_SIZE(mx27pdk_pins), @@ -128,8 +258,24 @@ static void __init mx27pdk_init(void) mx27_3ds_sdhc1_enable_level_translator(); imx27_add_imx_uart0(&uart_pdata); imx27_add_fec(NULL); - mxc_register_device(&imx_kpp_device, &mx27_3ds_keymap_data); - mxc_register_device(&mxc_sdhc_device0, &sdhc1_pdata); + imx27_add_imx_keypad(&mx27_3ds_keymap_data); + imx27_add_mxc_mmc(0, &sdhc1_pdata); + imx27_add_imx2_wdt(NULL); + otg_phy_init(); +#if defined(CONFIG_USB_ULPI) + if (otg_mode_host) { + otg_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops, + ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT); + + imx27_add_mxc_ehci_otg(&otg_pdata); + } +#endif + if (!otg_mode_host) + imx27_add_fsl_usb2_udc(&otg_device_pdata); + + imx27_add_spi_imx1(&spi2_pdata); + spi_register_board_info(mx27_3ds_spi_devs, + ARRAY_SIZE(mx27_3ds_spi_devs)); } static void __init mx27pdk_timer_init(void) diff --git a/arch/arm/mach-imx/mach-mx27ads.c b/arch/arm/mach-imx/mach-mx27ads.c index a1e4bc573af..b832f960fec 100644 --- a/arch/arm/mach-imx/mach-mx27ads.c +++ b/arch/arm/mach-imx/mach-mx27ads.c @@ -30,11 +30,8 @@ #include <mach/gpio.h> #include <mach/iomux-mx27.h> #include <mach/mxc_nand.h> -#include <mach/imxfb.h> -#include <mach/mmc.h> #include "devices-imx27.h" -#include "devices.h" /* * Base address of PBC controller, CS4 @@ -228,7 +225,7 @@ static struct imx_fb_videomode mx27ads_modes[] = { }, }; -static struct imx_fb_platform_data mx27ads_fb_data = { +static const struct imx_fb_platform_data mx27ads_fb_data __initconst = { .mode = mx27ads_modes, .num_modes = ARRAY_SIZE(mx27ads_modes), @@ -272,19 +269,18 @@ static void mx27ads_sdhc2_exit(struct device *dev, void *data) free_irq(IRQ_GPIOB(7), data); } -static struct imxmmc_platform_data sdhc1_pdata = { +static const struct imxmmc_platform_data sdhc1_pdata __initconst = { .init = mx27ads_sdhc1_init, .exit = mx27ads_sdhc1_exit, }; -static struct imxmmc_platform_data sdhc2_pdata = { +static const struct imxmmc_platform_data sdhc2_pdata __initconst = { .init = mx27ads_sdhc2_init, .exit = mx27ads_sdhc2_exit, }; static struct platform_device *platform_devices[] __initdata = { &mx27ads_nor_mtd_device, - &mxc_w1_master_device, }; static const struct imxuart_platform_data uart_pdata __initconst = { @@ -308,12 +304,13 @@ static void __init mx27ads_board_init(void) i2c_register_board_info(1, mx27ads_i2c_devices, ARRAY_SIZE(mx27ads_i2c_devices)); imx27_add_imx_i2c(1, &mx27ads_i2c1_data); - mxc_register_device(&mxc_fb_device, &mx27ads_fb_data); - mxc_register_device(&mxc_sdhc_device0, &sdhc1_pdata); - mxc_register_device(&mxc_sdhc_device1, &sdhc2_pdata); + imx27_add_imx_fb(&mx27ads_fb_data); + imx27_add_mxc_mmc(0, &sdhc1_pdata); + imx27_add_mxc_mmc(1, &sdhc2_pdata); imx27_add_fec(NULL); platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); + imx27_add_mxc_w1(NULL); } static void __init mx27ads_timer_init(void) diff --git a/arch/arm/mach-imx/mach-mxt_td60.c b/arch/arm/mach-imx/mach-mxt_td60.c index 38d3a4ae17c..4ce71b0401d 100644 --- a/arch/arm/mach-imx/mach-mxt_td60.c +++ b/arch/arm/mach-imx/mach-mxt_td60.c @@ -31,11 +31,8 @@ #include <mach/iomux-mx27.h> #include <mach/mxc_nand.h> #include <linux/i2c/pca953x.h> -#include <mach/imxfb.h> -#include <mach/mmc.h> #include "devices-imx27.h" -#include "devices.h" static const int mxt_td60_pins[] __initconst = { /* UART0 */ @@ -196,7 +193,7 @@ static struct imx_fb_videomode mxt_td60_modes[] = { }, }; -static struct imx_fb_platform_data mxt_td60_fb_data = { +static const struct imx_fb_platform_data mxt_td60_fb_data __initconst = { .mode = mxt_td60_modes, .num_modes = ARRAY_SIZE(mxt_td60_modes), @@ -226,7 +223,7 @@ static void mxt_td60_sdhc1_exit(struct device *dev, void *data) free_irq(IRQ_GPIOF(8), data); } -static struct imxmmc_platform_data sdhc1_pdata = { +static const struct imxmmc_platform_data sdhc1_pdata __initconst = { .init = mxt_td60_sdhc1_init, .exit = mxt_td60_sdhc1_exit, }; @@ -253,8 +250,8 @@ static void __init mxt_td60_board_init(void) imx27_add_imx_i2c(0, &mxt_td60_i2c0_data); imx27_add_imx_i2c(1, &mxt_td60_i2c1_data); - mxc_register_device(&mxc_fb_device, &mxt_td60_fb_data); - mxc_register_device(&mxc_sdhc_device0, &sdhc1_pdata); + imx27_add_imx_fb(&mxt_td60_fb_data); + imx27_add_mxc_mmc(0, &sdhc1_pdata); imx27_add_fec(NULL); } diff --git a/arch/arm/mach-imx/mach-pca100.c b/arch/arm/mach-imx/mach-pca100.c index 8c720d44602..cccc0a0a9c7 100644 --- a/arch/arm/mach-imx/mach-pca100.c +++ b/arch/arm/mach-imx/mach-pca100.c @@ -29,7 +29,6 @@ #include <linux/gpio.h> #include <linux/usb/otg.h> #include <linux/usb/ulpi.h> -#include <linux/fsl_devices.h> #include <asm/mach/arch.h> #include <asm/mach-types.h> @@ -40,13 +39,9 @@ #include <mach/audmux.h> #include <mach/mxc_nand.h> #include <mach/irqs.h> -#include <mach/mmc.h> -#include <mach/mxc_ehci.h> #include <mach/ulpi.h> -#include <mach/imxfb.h> #include "devices-imx27.h" -#include "devices.h" #define OTG_PHY_CS_GPIO (GPIO_PORTB + 23) #define USBH2_PHY_CS_GPIO (GPIO_PORTB + 24) @@ -171,11 +166,6 @@ pca100_nand_board_info __initconst = { .hw_ecc = 1, }; -static struct platform_device *platform_devices[] __initdata = { - &mxc_w1_master_device, - &mxc_wdt, -}; - static const struct imxi2c_platform_data pca100_i2c1_data __initconst = { .bitrate = 100000, }; @@ -274,7 +264,7 @@ static void pca100_sdhc2_exit(struct device *dev, void *data) free_irq(IRQ_GPIOC(29), data); } -static struct imxmmc_platform_data sdhc_pdata = { +static const struct imxmmc_platform_data sdhc_pdata __initconst = { .init = pca100_sdhc2_init, .exit = pca100_sdhc2_exit, }; @@ -286,7 +276,7 @@ static int otg_phy_init(struct platform_device *pdev) return 0; } -static struct mxc_usbh_platform_data otg_pdata = { +static struct mxc_usbh_platform_data otg_pdata __initdata = { .init = otg_phy_init, .portsc = MXC_EHCI_MODE_ULPI, .flags = MXC_EHCI_INTERFACE_DIFF_UNI, @@ -298,14 +288,14 @@ static int usbh2_phy_init(struct platform_device *pdev) return 0; } -static struct mxc_usbh_platform_data usbh2_pdata = { +static struct mxc_usbh_platform_data usbh2_pdata __initdata = { .init = usbh2_phy_init, .portsc = MXC_EHCI_MODE_ULPI, .flags = MXC_EHCI_INTERFACE_DIFF_UNI, }; #endif -static struct fsl_usb2_platform_data otg_device_pdata = { +static const struct fsl_usb2_platform_data otg_device_pdata __initconst = { .operating_mode = FSL_USB2_DR_DEVICE, .phy_mode = FSL_USB2_PHY_ULPI, }; @@ -355,7 +345,7 @@ static struct imx_fb_videomode pca100_fb_modes[] = { }, }; -static struct imx_fb_platform_data pca100_fb_data = { +static const struct imx_fb_platform_data pca100_fb_data __initconst = { .mode = pca100_fb_modes, .num_modes = ARRAY_SIZE(pca100_fb_modes), @@ -389,7 +379,7 @@ static void __init pca100_init(void) imx27_add_imx_uart0(&uart_pdata); - mxc_register_device(&mxc_sdhc_device1, &sdhc_pdata); + imx27_add_mxc_mmc(1, &sdhc_pdata); imx27_add_mxc_nand(&pca100_nand_board_info); @@ -417,23 +407,24 @@ static void __init pca100_init(void) otg_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops, ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT); - mxc_register_device(&mxc_otg_host, &otg_pdata); + imx27_add_mxc_ehci_otg(&otg_pdata); } usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops, ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT); - mxc_register_device(&mxc_usbh2, &usbh2_pdata); + imx27_add_mxc_ehci_hs(2, &usbh2_pdata); #endif if (!otg_mode_host) { gpio_set_value(OTG_PHY_CS_GPIO, 0); - mxc_register_device(&mxc_otg_udc_device, &otg_device_pdata); + imx27_add_fsl_usb2_udc(&otg_device_pdata); } - mxc_register_device(&mxc_fb_device, &pca100_fb_data); + imx27_add_imx_fb(&pca100_fb_data); imx27_add_fec(NULL); - platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); + imx27_add_imx2_wdt(NULL); + imx27_add_mxc_w1(NULL); } static void __init pca100_timer_init(void) diff --git a/arch/arm/mach-imx/mach-pcm038.c b/arch/arm/mach-imx/mach-pcm038.c index 49a97ce0742..f667a262dfc 100644 --- a/arch/arm/mach-imx/mach-pcm038.c +++ b/arch/arm/mach-imx/mach-pcm038.c @@ -37,11 +37,9 @@ #include <mach/hardware.h> #include <mach/iomux-mx27.h> #include <mach/mxc_nand.h> -#include <mach/mxc_ehci.h> #include <mach/ulpi.h> #include "devices-imx27.h" -#include "devices.h" static const int pcm038_pins[] __initconst = { /* UART1 */ @@ -172,9 +170,7 @@ pcm038_nand_board_info __initconst = { static struct platform_device *platform_devices[] __initdata = { &pcm038_nor_mtd_device, - &mxc_w1_master_device, &pcm038_sram_mtd_device, - &mxc_wdt, }; /* On pcm038 there's a sram attached to CS1, we enable the chipselect here and @@ -214,7 +210,7 @@ static const struct spi_imx_master pcm038_spi0_data __initconst = { static struct regulator_consumer_supply sdhc1_consumers[] = { { - .dev = &mxc_sdhc_device1.dev, + .dev_name = "mxc-mmc.1", .supply = "sdhc_vcc", }, }; @@ -285,7 +281,7 @@ static struct spi_board_info pcm038_spi_board_info[] __initdata = { } }; -static struct mxc_usbh_platform_data usbh2_pdata = { +static const struct mxc_usbh_platform_data usbh2_pdata __initconst = { .portsc = MXC_EHCI_MODE_ULPI, .flags = MXC_EHCI_POWER_PINS_ENABLED | MXC_EHCI_INTERFACE_DIFF_UNI, }; @@ -322,10 +318,12 @@ static void __init pcm038_init(void) spi_register_board_info(pcm038_spi_board_info, ARRAY_SIZE(pcm038_spi_board_info)); - mxc_register_device(&mxc_usbh2, &usbh2_pdata); + imx27_add_mxc_ehci_hs(2, &usbh2_pdata); imx27_add_fec(NULL); platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); + imx27_add_imx2_wdt(NULL); + imx27_add_mxc_w1(NULL); #ifdef CONFIG_MACH_PCM970_BASEBOARD pcm970_baseboard_init(); diff --git a/arch/arm/mach-imx/mach-scb9328.c b/arch/arm/mach-imx/mach-scb9328.c index 1fbdd3faa7a..eae878f306c 100644 --- a/arch/arm/mach-imx/mach-scb9328.c +++ b/arch/arm/mach-imx/mach-scb9328.c @@ -25,7 +25,6 @@ #include <mach/iomux-mx1.h> #include "devices-imx1.h" -#include "devices.h" /* * This scb9328 has a 32MiB flash diff --git a/arch/arm/mach-imx/mm-imx1.c b/arch/arm/mach-imx/mm-imx1.c index 9be92b96dc8..729ae0915af 100644 --- a/arch/arm/mach-imx/mm-imx1.c +++ b/arch/arm/mach-imx/mm-imx1.c @@ -25,12 +25,7 @@ #include <mach/hardware.h> static struct map_desc imx_io_desc[] __initdata = { - { - .virtual = MX1_IO_BASE_ADDR_VIRT, - .pfn = __phys_to_pfn(MX1_IO_BASE_ADDR), - .length = MX1_IO_SIZE, - .type = MT_DEVICE - } + imx_map_entry(MX1, IO, MT_DEVICE), }; void __init mx1_map_io(void) diff --git a/arch/arm/mach-imx/mm-imx21.c b/arch/arm/mach-imx/mm-imx21.c index 12faeeaa0a9..e728af81d1b 100644 --- a/arch/arm/mach-imx/mm-imx21.c +++ b/arch/arm/mach-imx/mm-imx21.c @@ -35,33 +35,18 @@ static struct map_desc imx21_io_desc[] __initdata = { * - ROM Patch * - and some reserved space */ - { - .virtual = MX21_AIPI_BASE_ADDR_VIRT, - .pfn = __phys_to_pfn(MX21_AIPI_BASE_ADDR), - .length = MX21_AIPI_SIZE, - .type = MT_DEVICE - }, + imx_map_entry(MX21, AIPI, MT_DEVICE), /* * this fixed mapping covers: * - CSI * - ATA */ - { - .virtual = MX21_SAHB1_BASE_ADDR_VIRT, - .pfn = __phys_to_pfn(MX21_SAHB1_BASE_ADDR), - .length = MX21_SAHB1_SIZE, - .type = MT_DEVICE - }, + imx_map_entry(MX21, SAHB1, MT_DEVICE), /* * this fixed mapping covers: * - EMI */ - { - .virtual = MX21_X_MEMC_BASE_ADDR_VIRT, - .pfn = __phys_to_pfn(MX21_X_MEMC_BASE_ADDR), - .length = MX21_X_MEMC_SIZE, - .type = MT_DEVICE - }, + imx_map_entry(MX21, X_MEMC, MT_DEVICE), }; /* diff --git a/arch/arm/mach-mx25/mm.c b/arch/arm/mach-imx/mm-imx25.c index bb677111fb0..2edec6ce8fe 100644 --- a/arch/arm/mach-mx25/mm.c +++ b/arch/arm/mach-imx/mm-imx25.c @@ -30,25 +30,12 @@ /* * This table defines static virtual address mappings for I/O regions. - * These are the mappings common across all MX3 boards. + * These are the mappings common across all MX25 boards. */ -static struct map_desc mxc_io_desc[] __initdata = { - { - .virtual = MX25_AVIC_BASE_ADDR_VIRT, - .pfn = __phys_to_pfn(MX25_AVIC_BASE_ADDR), - .length = MX25_AVIC_SIZE, - .type = MT_DEVICE_NONSHARED - }, { - .virtual = MX25_AIPS1_BASE_ADDR_VIRT, - .pfn = __phys_to_pfn(MX25_AIPS1_BASE_ADDR), - .length = MX25_AIPS1_SIZE, - .type = MT_DEVICE_NONSHARED - }, { - .virtual = MX25_AIPS2_BASE_ADDR_VIRT, - .pfn = __phys_to_pfn(MX25_AIPS2_BASE_ADDR), - .length = MX25_AIPS2_SIZE, - .type = MT_DEVICE_NONSHARED - }, +static struct map_desc mx25_io_desc[] __initdata = { + imx_map_entry(MX25, AVIC, MT_DEVICE_NONSHARED), + imx_map_entry(MX25, AIPS1, MT_DEVICE_NONSHARED), + imx_map_entry(MX25, AIPS2, MT_DEVICE_NONSHARED), }; /* @@ -62,14 +49,14 @@ void __init mx25_map_io(void) mxc_iomux_v3_init(MX25_IO_ADDRESS(MX25_IOMUXC_BASE_ADDR)); mxc_arch_reset_init(MX25_IO_ADDRESS(MX25_WDOG_BASE_ADDR)); - iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc)); + iotable_init(mx25_io_desc, ARRAY_SIZE(mx25_io_desc)); } int imx25_register_gpios(void); void __init mx25_init_irq(void) { - mxc_init_irq((void __iomem *)MX25_AVIC_BASE_ADDR_VIRT); + mxc_init_irq(MX25_IO_ADDRESS(MX25_AVIC_BASE_ADDR)); imx25_register_gpios(); } diff --git a/arch/arm/mach-imx/mm-imx27.c b/arch/arm/mach-imx/mm-imx27.c index a24622957ff..374e48b7a41 100644 --- a/arch/arm/mach-imx/mm-imx27.c +++ b/arch/arm/mach-imx/mm-imx27.c @@ -35,33 +35,18 @@ static struct map_desc imx27_io_desc[] __initdata = { * - ROM Patch * - and some reserved space */ - { - .virtual = MX27_AIPI_BASE_ADDR_VIRT, - .pfn = __phys_to_pfn(MX27_AIPI_BASE_ADDR), - .length = MX27_AIPI_SIZE, - .type = MT_DEVICE - }, + imx_map_entry(MX27, AIPI, MT_DEVICE), /* * this fixed mapping covers: * - CSI * - ATA */ - { - .virtual = MX27_SAHB1_BASE_ADDR_VIRT, - .pfn = __phys_to_pfn(MX27_SAHB1_BASE_ADDR), - .length = MX27_SAHB1_SIZE, - .type = MT_DEVICE - }, + imx_map_entry(MX27, SAHB1, MT_DEVICE), /* * this fixed mapping covers: * - EMI */ - { - .virtual = MX27_X_MEMC_BASE_ADDR_VIRT, - .pfn = __phys_to_pfn(MX27_X_MEMC_BASE_ADDR), - .length = MX27_X_MEMC_SIZE, - .type = MT_DEVICE - }, + imx_map_entry(MX27, X_MEMC, MT_DEVICE), }; /* diff --git a/arch/arm/mach-imx/pcm970-baseboard.c b/arch/arm/mach-imx/pcm970-baseboard.c index 9110d9cca7a..99afbc3f43a 100644 --- a/arch/arm/mach-imx/pcm970-baseboard.c +++ b/arch/arm/mach-imx/pcm970-baseboard.c @@ -25,11 +25,9 @@ #include <mach/common.h> #include <mach/iomux-mx27.h> -#include <mach/imxfb.h> #include <mach/hardware.h> -#include <mach/mmc.h> -#include "devices.h" +#include "devices-imx27.h" static const int pcm970_pins[] __initconst = { /* SDHC */ @@ -119,7 +117,7 @@ static void pcm970_sdhc2_exit(struct device *dev, void *data) gpio_free(GPIO_PORTC + 28); } -static struct imxmmc_platform_data sdhc_pdata = { +static const struct imxmmc_platform_data sdhc_pdata __initconst = { .get_ro = pcm970_sdhc2_get_ro, .init = pcm970_sdhc2_init, .exit = pcm970_sdhc2_exit, @@ -179,7 +177,7 @@ static struct imx_fb_videomode pcm970_modes[] = { }, }; -static struct imx_fb_platform_data pcm038_fb_data = { +static const struct imx_fb_platform_data pcm038_fb_data __initconst = { .mode = pcm970_modes, .num_modes = ARRAY_SIZE(pcm970_modes), @@ -226,8 +224,8 @@ void __init pcm970_baseboard_init(void) mxc_gpio_setup_multiple_pins(pcm970_pins, ARRAY_SIZE(pcm970_pins), "PCM970"); - mxc_register_device(&mxc_fb_device, &pcm038_fb_data); + imx27_add_imx_fb(&pcm038_fb_data); mxc_gpio_mode(GPIO_PORTC | 28 | GPIO_GPIO | GPIO_IN); - mxc_register_device(&mxc_sdhc_device1, &sdhc_pdata); + imx27_add_mxc_mmc(1, &sdhc_pdata); platform_device_register(&pcm970_sja1000); } diff --git a/arch/arm/mach-imx/pm-imx27.c b/arch/arm/mach-imx/pm-imx27.c index afc17ce0bb5..6bf81ceea13 100644 --- a/arch/arm/mach-imx/pm-imx27.c +++ b/arch/arm/mach-imx/pm-imx27.c @@ -39,6 +39,9 @@ static struct platform_suspend_ops mx27_suspend_ops = { static int __init mx27_pm_init(void) { + if (!cpu_is_mx27()) + return 0; + suspend_set_ops(&mx27_suspend_ops); return 0; } diff --git a/arch/arm/mach-mx25/Kconfig b/arch/arm/mach-mx25/Kconfig deleted file mode 100644 index 38ca09a5df9..00000000000 --- a/arch/arm/mach-mx25/Kconfig +++ /dev/null @@ -1,34 +0,0 @@ -if ARCH_MX25 - -comment "MX25 platforms:" - -config MACH_MX25_3DS - bool "Support MX25PDK (3DS) Platform" - select IMX_HAVE_PLATFORM_IMX_UART - select IMX_HAVE_PLATFORM_MXC_NAND - select IMX_HAVE_PLATFORM_ESDHC - -config MACH_EUKREA_CPUIMX25 - bool "Support Eukrea CPUIMX25 Platform" - select IMX_HAVE_PLATFORM_IMX_I2C - select IMX_HAVE_PLATFORM_IMX_UART - select IMX_HAVE_PLATFORM_MXC_NAND - select IMX_HAVE_PLATFORM_FLEXCAN - select IMX_HAVE_PLATFORM_ESDHC - select MXC_ULPI if USB_ULPI - -choice - prompt "Baseboard" - depends on MACH_EUKREA_CPUIMX25 - default MACH_EUKREA_MBIMXSD25_BASEBOARD - -config MACH_EUKREA_MBIMXSD25_BASEBOARD - bool "Eukrea MBIMXSD development board" - select IMX_HAVE_PLATFORM_IMX_SSI - help - This adds board specific devices that can be found on Eukrea's - MBIMXSD evaluation board. - -endchoice - -endif diff --git a/arch/arm/mach-mx25/Makefile b/arch/arm/mach-mx25/Makefile deleted file mode 100644 index d9e46ce00a4..00000000000 --- a/arch/arm/mach-mx25/Makefile +++ /dev/null @@ -1,5 +0,0 @@ -obj-y := mm.o devices.o -obj-$(CONFIG_ARCH_MX25) += clock.o -obj-$(CONFIG_MACH_MX25_3DS) += mach-mx25_3ds.o -obj-$(CONFIG_MACH_EUKREA_CPUIMX25) += mach-cpuimx25.o -obj-$(CONFIG_MACH_EUKREA_MBIMXSD25_BASEBOARD) += eukrea_mbimxsd-baseboard.o diff --git a/arch/arm/mach-mx25/Makefile.boot b/arch/arm/mach-mx25/Makefile.boot deleted file mode 100644 index e1dd366f836..00000000000 --- a/arch/arm/mach-mx25/Makefile.boot +++ /dev/null @@ -1,3 +0,0 @@ - zreladdr-y := 0x80008000 -params_phys-y := 0x80000100 -initrd_phys-y := 0x80800000 diff --git a/arch/arm/mach-mx25/devices.c b/arch/arm/mach-mx25/devices.c deleted file mode 100644 index 1d0eb3e8594..00000000000 --- a/arch/arm/mach-mx25/devices.c +++ /dev/null @@ -1,308 +0,0 @@ -/* - * Copyright 2009 Sascha Hauer, <kernel@pengutronix.de> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, - * Boston, MA 02110-1301, USA. - */ - -#include <linux/platform_device.h> -#include <linux/dma-mapping.h> -#include <linux/gpio.h> -#include <mach/mx25.h> -#include <mach/irqs.h> - -static u64 otg_dmamask = DMA_BIT_MASK(32); - -static struct resource mxc_otg_resources[] = { - { - .start = MX25_OTG_BASE_ADDR, - .end = MX25_OTG_BASE_ADDR + 0x1ff, - .flags = IORESOURCE_MEM, - }, { - .start = 37, - .end = 37, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device mxc_otg = { - .name = "mxc-ehci", - .id = 0, - .dev = { - .coherent_dma_mask = 0xffffffff, - .dma_mask = &otg_dmamask, - }, - .resource = mxc_otg_resources, - .num_resources = ARRAY_SIZE(mxc_otg_resources), -}; - -/* OTG gadget device */ -struct platform_device otg_udc_device = { - .name = "fsl-usb2-udc", - .id = -1, - .dev = { - .dma_mask = &otg_dmamask, - .coherent_dma_mask = 0xffffffff, - }, - .resource = mxc_otg_resources, - .num_resources = ARRAY_SIZE(mxc_otg_resources), -}; - -static u64 usbh2_dmamask = DMA_BIT_MASK(32); - -static struct resource mxc_usbh2_resources[] = { - { - .start = MX25_OTG_BASE_ADDR + 0x400, - .end = MX25_OTG_BASE_ADDR + 0x5ff, - .flags = IORESOURCE_MEM, - }, { - .start = 35, - .end = 35, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device mxc_usbh2 = { - .name = "mxc-ehci", - .id = 1, - .dev = { - .coherent_dma_mask = 0xffffffff, - .dma_mask = &usbh2_dmamask, - }, - .resource = mxc_usbh2_resources, - .num_resources = ARRAY_SIZE(mxc_usbh2_resources), -}; - -static struct resource mxc_pwm_resources0[] = { - { - .start = 0x53fe0000, - .end = 0x53fe3fff, - .flags = IORESOURCE_MEM, - }, { - .start = 26, - .end = 26, - .flags = IORESOURCE_IRQ, - } -}; - -struct platform_device mxc_pwm_device0 = { - .name = "mxc_pwm", - .id = 0, - .num_resources = ARRAY_SIZE(mxc_pwm_resources0), - .resource = mxc_pwm_resources0, -}; - -static struct resource mxc_pwm_resources1[] = { - { - .start = 0x53fa0000, - .end = 0x53fa3fff, - .flags = IORESOURCE_MEM, - }, { - .start = 36, - .end = 36, - .flags = IORESOURCE_IRQ, - } -}; - -struct platform_device mxc_pwm_device1 = { - .name = "mxc_pwm", - .id = 1, - .num_resources = ARRAY_SIZE(mxc_pwm_resources1), - .resource = mxc_pwm_resources1, -}; - -static struct resource mxc_pwm_resources2[] = { - { - .start = 0x53fa8000, - .end = 0x53fabfff, - .flags = IORESOURCE_MEM, - }, { - .start = 41, - .end = 41, - .flags = IORESOURCE_IRQ, - } -}; - -struct platform_device mxc_pwm_device2 = { - .name = "mxc_pwm", - .id = 2, - .num_resources = ARRAY_SIZE(mxc_pwm_resources2), - .resource = mxc_pwm_resources2, -}; - -static struct resource mxc_keypad_resources[] = { - { - .start = 0x43fa8000, - .end = 0x43fabfff, - .flags = IORESOURCE_MEM, - }, { - .start = 24, - .end = 24, - .flags = IORESOURCE_IRQ, - } -}; - -struct platform_device mxc_keypad_device = { - .name = "mxc-keypad", - .id = -1, - .num_resources = ARRAY_SIZE(mxc_keypad_resources), - .resource = mxc_keypad_resources, -}; - -static struct resource mxc_pwm_resources3[] = { - { - .start = 0x53fc8000, - .end = 0x53fcbfff, - .flags = IORESOURCE_MEM, - }, { - .start = 42, - .end = 42, - .flags = IORESOURCE_IRQ, - } -}; - -struct platform_device mxc_pwm_device3 = { - .name = "mxc_pwm", - .id = 3, - .num_resources = ARRAY_SIZE(mxc_pwm_resources3), - .resource = mxc_pwm_resources3, -}; - -static struct mxc_gpio_port imx_gpio_ports[] = { - { - .chip.label = "gpio-0", - .base = (void __iomem *)MX25_GPIO1_BASE_ADDR_VIRT, - .irq = 52, - .virtual_irq_start = MXC_GPIO_IRQ_START, - }, { - .chip.label = "gpio-1", - .base = (void __iomem *)MX25_GPIO2_BASE_ADDR_VIRT, - .irq = 51, - .virtual_irq_start = MXC_GPIO_IRQ_START + 32, - }, { - .chip.label = "gpio-2", - .base = (void __iomem *)MX25_GPIO3_BASE_ADDR_VIRT, - .irq = 16, - .virtual_irq_start = MXC_GPIO_IRQ_START + 64, - }, { - .chip.label = "gpio-3", - .base = (void __iomem *)MX25_GPIO4_BASE_ADDR_VIRT, - .irq = 23, - .virtual_irq_start = MXC_GPIO_IRQ_START + 96, - } -}; - -int __init imx25_register_gpios(void) -{ - return mxc_gpio_init(imx_gpio_ports, ARRAY_SIZE(imx_gpio_ports)); -} - -static struct resource mx25_rtc_resources[] = { - { - .start = MX25_DRYICE_BASE_ADDR, - .end = MX25_DRYICE_BASE_ADDR + 0x40, - .flags = IORESOURCE_MEM, - }, - { - .start = MX25_INT_DRYICE, - .flags = IORESOURCE_IRQ - }, -}; - -struct platform_device mx25_rtc_device = { - .name = "imxdi_rtc", - .id = 0, - .num_resources = ARRAY_SIZE(mx25_rtc_resources), - .resource = mx25_rtc_resources, -}; - -static struct resource mx25_fb_resources[] = { - { - .start = MX25_LCDC_BASE_ADDR, - .end = MX25_LCDC_BASE_ADDR + 0xfff, - .flags = IORESOURCE_MEM, - }, - { - .start = MX25_INT_LCDC, - .end = MX25_INT_LCDC, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device mx25_fb_device = { - .name = "imx-fb", - .id = 0, - .resource = mx25_fb_resources, - .num_resources = ARRAY_SIZE(mx25_fb_resources), - .dev = { - .coherent_dma_mask = 0xFFFFFFFF, - }, -}; - -static struct resource mxc_wdt_resources[] = { - { - .start = MX25_WDOG_BASE_ADDR, - .end = MX25_WDOG_BASE_ADDR + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, -}; - -struct platform_device mxc_wdt = { - .name = "imx2-wdt", - .id = 0, - .num_resources = ARRAY_SIZE(mxc_wdt_resources), - .resource = mxc_wdt_resources, -}; - -static struct resource mx25_kpp_resources[] = { - { - .start = MX25_KPP_BASE_ADDR, - .end = MX25_KPP_BASE_ADDR + 0xf, - .flags = IORESOURCE_MEM, - }, - { - .start = MX25_INT_KPP, - .end = MX25_INT_KPP, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device mx25_kpp_device = { - .name = "imx-keypad", - .id = -1, - .num_resources = ARRAY_SIZE(mx25_kpp_resources), - .resource = mx25_kpp_resources, -}; - -static struct resource mx25_csi_resources[] = { - { - .start = MX25_CSI_BASE_ADDR, - .end = MX25_CSI_BASE_ADDR + 0xfff, - .flags = IORESOURCE_MEM, - }, - { - .start = MX25_INT_CSI, - .flags = IORESOURCE_IRQ - }, -}; - -struct platform_device mx25_csi_device = { - .name = "mx2-camera", - .id = 0, - .num_resources = ARRAY_SIZE(mx25_csi_resources), - .resource = mx25_csi_resources, - .dev = { - .coherent_dma_mask = 0xffffffff, - }, -}; diff --git a/arch/arm/mach-mx25/devices.h b/arch/arm/mach-mx25/devices.h deleted file mode 100644 index 7b70a43c3a4..00000000000 --- a/arch/arm/mach-mx25/devices.h +++ /dev/null @@ -1,13 +0,0 @@ -extern struct platform_device mxc_otg; -extern struct platform_device otg_udc_device; -extern struct platform_device mxc_usbh2; -extern struct platform_device mxc_pwm_device0; -extern struct platform_device mxc_pwm_device1; -extern struct platform_device mxc_pwm_device2; -extern struct platform_device mxc_pwm_device3; -extern struct platform_device mxc_keypad_device; -extern struct platform_device mx25_rtc_device; -extern struct platform_device mx25_fb_device; -extern struct platform_device mxc_wdt; -extern struct platform_device mx25_kpp_device; -extern struct platform_device mx25_csi_device; diff --git a/arch/arm/mach-mx3/Kconfig b/arch/arm/mach-mx3/Kconfig index 5000ac1f93e..0717f887cba 100644 --- a/arch/arm/mach-mx3/Kconfig +++ b/arch/arm/mach-mx3/Kconfig @@ -1,21 +1,35 @@ if ARCH_MX3 +# ARCH_MX31 and ARCH_MX35 are left for compatibility +# Some usages assume that having one of them implies not having (e.g.) ARCH_MX2. +# To easily distinguish good and reviewed from unreviewed usages new (and IMHO +# more sensible) names are used: SOC_IMX31 and SOC_IMX35 config ARCH_MX31 - select ARCH_HAS_RNGA - select ARCH_MXC_AUDMUX_V2 bool config ARCH_MX35 bool + +config SOC_IMX31 + bool + select IMX_HAVE_PLATFORM_MXC_RNGA + select ARCH_MXC_AUDMUX_V2 + select ARCH_MX31 + select MXC_AVIC + +config SOC_IMX35 + bool select ARCH_MXC_IOMUX_V3 select ARCH_MXC_AUDMUX_V2 select HAVE_EPIT + select ARCH_MX35 + select MXC_AVIC comment "MX3 platforms:" config MACH_MX31ADS bool "Support MX31ADS platforms" - select ARCH_MX31 + select SOC_IMX31 select IMX_HAVE_PLATFORM_IMX_I2C select IMX_HAVE_PLATFORM_IMX_SSI select IMX_HAVE_PLATFORM_IMX_UART @@ -37,10 +51,15 @@ config MACH_MX31ADS_WM1133_EV1 config MACH_PCM037 bool "Support Phytec pcm037 (i.MX31) platforms" - select ARCH_MX31 + select SOC_IMX31 + select IMX_HAVE_PLATFORM_FSL_USB2_UDC + select IMX_HAVE_PLATFORM_IMX2_WDT select IMX_HAVE_PLATFORM_IMX_I2C select IMX_HAVE_PLATFORM_IMX_UART + select IMX_HAVE_PLATFORM_MXC_EHCI + select IMX_HAVE_PLATFORM_MXC_MMC select IMX_HAVE_PLATFORM_MXC_NAND + select IMX_HAVE_PLATFORM_MXC_W1 select MXC_ULPI if USB_ULPI help Include support for Phytec pcm037 platform. This includes @@ -57,9 +76,12 @@ config MACH_PCM037_EET config MACH_MX31LITE bool "Support MX31 LITEKIT (LogicPD)" - select ARCH_MX31 + select SOC_IMX31 select MXC_ULPI if USB_ULPI + select IMX_HAVE_PLATFORM_IMX2_WDT select IMX_HAVE_PLATFORM_IMX_UART + select IMX_HAVE_PLATFORM_MXC_EHCI + select IMX_HAVE_PLATFORM_MXC_MMC select IMX_HAVE_PLATFORM_MXC_NAND select IMX_HAVE_PLATFORM_SPI_IMX help @@ -68,11 +90,16 @@ config MACH_MX31LITE config MACH_MX31_3DS bool "Support MX31PDK (3DS)" - select ARCH_MX31 + select SOC_IMX31 select MXC_DEBUG_BOARD + select IMX_HAVE_PLATFORM_FSL_USB2_UDC + select IMX_HAVE_PLATFORM_IMX2_WDT + select IMX_HAVE_PLATFORM_IMX_KEYPAD select IMX_HAVE_PLATFORM_IMX_UART + select IMX_HAVE_PLATFORM_MXC_EHCI select IMX_HAVE_PLATFORM_MXC_NAND select IMX_HAVE_PLATFORM_SPI_IMX + select MXC_ULPI if USB_ULPI help Include support for MX31PDK (3DS) platform. This includes specific configurations for the board and its peripherals. @@ -88,9 +115,12 @@ config MACH_MX31_3DS_MXC_NAND_USE_BBT config MACH_MX31MOBOARD bool "Support mx31moboard platforms (EPFL Mobots group)" - select ARCH_MX31 + select SOC_IMX31 + select IMX_HAVE_PLATFORM_FSL_USB2_UDC select IMX_HAVE_PLATFORM_IMX_I2C select IMX_HAVE_PLATFORM_IMX_UART + select IMX_HAVE_PLATFORM_MXC_EHCI + select IMX_HAVE_PLATFORM_MXC_MMC select IMX_HAVE_PLATFORM_SPI_IMX select MXC_ULPI if USB_ULPI help @@ -99,8 +129,10 @@ config MACH_MX31MOBOARD config MACH_MX31LILLY bool "Support MX31 LILLY-1131 platforms (INCO startec)" - select ARCH_MX31 + select SOC_IMX31 select IMX_HAVE_PLATFORM_IMX_UART + select IMX_HAVE_PLATFORM_MXC_EHCI + select IMX_HAVE_PLATFORM_MXC_MMC select IMX_HAVE_PLATFORM_SPI_IMX select MXC_ULPI if USB_ULPI help @@ -109,7 +141,7 @@ config MACH_MX31LILLY config MACH_QONG bool "Support Dave/DENX QongEVB-LITE platform" - select ARCH_MX31 + select SOC_IMX31 select IMX_HAVE_PLATFORM_IMX_UART help Include support for Dave/DENX QongEVB-LITE platform. This includes @@ -117,13 +149,16 @@ config MACH_QONG config MACH_PCM043 bool "Support Phytec pcm043 (i.MX35) platforms" - select ARCH_MX35 + select SOC_IMX35 + select IMX_HAVE_PLATFORM_FLEXCAN + select IMX_HAVE_PLATFORM_FSL_USB2_UDC + select IMX_HAVE_PLATFORM_IMX2_WDT select IMX_HAVE_PLATFORM_IMX_I2C select IMX_HAVE_PLATFORM_IMX_SSI select IMX_HAVE_PLATFORM_IMX_UART + select IMX_HAVE_PLATFORM_MXC_EHCI select IMX_HAVE_PLATFORM_MXC_NAND - select IMX_HAVE_PLATFORM_FLEXCAN - select IMX_HAVE_PLATFORM_ESDHC + select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX select MXC_ULPI if USB_ULPI help Include support for Phytec pcm043 platform. This includes @@ -131,9 +166,11 @@ config MACH_PCM043 config MACH_ARMADILLO5X0 bool "Support Atmark Armadillo-500 Development Base Board" - select ARCH_MX31 + select SOC_IMX31 select IMX_HAVE_PLATFORM_IMX_I2C select IMX_HAVE_PLATFORM_IMX_UART + select IMX_HAVE_PLATFORM_MXC_EHCI + select IMX_HAVE_PLATFORM_MXC_MMC select IMX_HAVE_PLATFORM_MXC_NAND select MXC_ULPI if USB_ULPI help @@ -142,19 +179,21 @@ config MACH_ARMADILLO5X0 config MACH_MX35_3DS bool "Support MX35PDK platform" - select ARCH_MX35 + select SOC_IMX35 select MXC_DEBUG_BOARD + select IMX_HAVE_PLATFORM_FSL_USB2_UDC + select IMX_HAVE_PLATFORM_IMX2_WDT select IMX_HAVE_PLATFORM_IMX_UART + select IMX_HAVE_PLATFORM_MXC_EHCI select IMX_HAVE_PLATFORM_MXC_NAND - select IMX_HAVE_PLATFORM_ESDHC - default n + select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX help Include support for MX35PDK platform. This includes specific configurations for the board and its peripherals. config MACH_KZM_ARM11_01 bool "Support KZM-ARM11-01(Kyoto Microcomputer)" - select ARCH_MX31 + select SOC_IMX31 select IMX_HAVE_PLATFORM_IMX_UART help Include support for KZM-ARM11-01. This includes specific @@ -162,12 +201,15 @@ config MACH_KZM_ARM11_01 config MACH_EUKREA_CPUIMX35 bool "Support Eukrea CPUIMX35 Platform" - select ARCH_MX35 - select IMX_HAVE_PLATFORM_IMX_UART + select SOC_IMX35 + select IMX_HAVE_PLATFORM_FLEXCAN + select IMX_HAVE_PLATFORM_FSL_USB2_UDC + select IMX_HAVE_PLATFORM_IMX2_WDT select IMX_HAVE_PLATFORM_IMX_I2C + select IMX_HAVE_PLATFORM_IMX_UART + select IMX_HAVE_PLATFORM_MXC_EHCI select IMX_HAVE_PLATFORM_MXC_NAND - select IMX_HAVE_PLATFORM_FLEXCAN - select IMX_HAVE_PLATFORM_ESDHC + select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX select MXC_ULPI if USB_ULPI help Include support for Eukrea CPUIMX35 platform. This includes diff --git a/arch/arm/mach-mx3/Makefile b/arch/arm/mach-mx3/Makefile index 8a182d0a3fc..8db13294ad2 100644 --- a/arch/arm/mach-mx3/Makefile +++ b/arch/arm/mach-mx3/Makefile @@ -5,17 +5,14 @@ # Object file lists. obj-y := mm.o devices.o cpu.o -CFLAGS_mm.o = -DIMX_NEEDS_DEPRECATED_SYMBOLS -CFLAGS_devices.o = -DIMX_NEEDS_DEPRECATED_SYMBOLS -obj-$(CONFIG_ARCH_MX31) += clock-imx31.o iomux-imx31.o -obj-$(CONFIG_ARCH_MX35) += clock-imx35.o +obj-$(CONFIG_SOC_IMX31) += clock-imx31.o iomux-imx31.o +obj-$(CONFIG_SOC_IMX35) += clock-imx35.o obj-$(CONFIG_MACH_MX31ADS) += mach-mx31ads.o obj-$(CONFIG_MACH_MX31LILLY) += mach-mx31lilly.o mx31lilly-db.o obj-$(CONFIG_MACH_MX31LITE) += mach-mx31lite.o mx31lite-db.o obj-$(CONFIG_MACH_PCM037) += mach-pcm037.o obj-$(CONFIG_MACH_PCM037_EET) += mach-pcm037_eet.o obj-$(CONFIG_MACH_MX31_3DS) += mach-mx31_3ds.o -CFLAGS_mach-mx31_3ds.o = -DIMX_NEEDS_DEPRECATED_SYMBOLS obj-$(CONFIG_MACH_MX31MOBOARD) += mach-mx31moboard.o mx31moboard-devboard.o \ mx31moboard-marxbot.o mx31moboard-smartbot.o obj-$(CONFIG_MACH_QONG) += mach-qong.o diff --git a/arch/arm/mach-mx3/clock-imx31.c b/arch/arm/mach-mx3/clock-imx31.c index 109e98f323e..4193cf5a263 100644 --- a/arch/arm/mach-mx3/clock-imx31.c +++ b/arch/arm/mach-mx3/clock-imx31.c @@ -530,7 +530,7 @@ static struct clk_lookup lookups[] = { _REGISTER_CLOCK("imx31-cspi.2", NULL, cspi3_clk) _REGISTER_CLOCK(NULL, "gpt", gpt_clk) _REGISTER_CLOCK(NULL, "pwm", pwm_clk) - _REGISTER_CLOCK("imx-wdt.0", NULL, wdog_clk) + _REGISTER_CLOCK("imx2-wdt.0", NULL, wdog_clk) _REGISTER_CLOCK(NULL, "rtc", rtc_clk) _REGISTER_CLOCK(NULL, "epit", epit1_clk) _REGISTER_CLOCK(NULL, "epit", epit2_clk) @@ -615,7 +615,7 @@ int __init mx31_clocks_init(unsigned long fref) mx31_read_cpu_rev(); - if (mx31_revision() >= MX31_CHIP_REV_2_0) { + if (mx31_revision() >= IMX_CHIP_REVISION_2_0) { reg = __raw_readl(MXC_CCM_PMCR1); /* No PLL restart on DVFS switch; enable auto EMI handshake */ reg |= MXC_CCM_PMCR1_PLLRDIS | MXC_CCM_PMCR1_EMIRQ_EN; diff --git a/arch/arm/mach-mx3/clock-imx35.c b/arch/arm/mach-mx3/clock-imx35.c index 61e4a318980..22259d95583 100644 --- a/arch/arm/mach-mx3/clock-imx35.c +++ b/arch/arm/mach-mx3/clock-imx35.c @@ -495,7 +495,7 @@ static struct clk_lookup lookups[] = { _REGISTER_CLOCK("mxc-ehci.2", "usb", usbotg_clk) _REGISTER_CLOCK("fsl-usb2-udc", "usb", usbotg_clk) _REGISTER_CLOCK("fsl-usb2-udc", "usb_ahb", usbahb_clk) - _REGISTER_CLOCK("imx-wdt.0", NULL, wdog_clk) + _REGISTER_CLOCK("imx2-wdt.0", NULL, wdog_clk) _REGISTER_CLOCK(NULL, "max", max_clk) _REGISTER_CLOCK(NULL, "audmux", audmux_clk) _REGISTER_CLOCK(NULL, "csi", csi_clk) diff --git a/arch/arm/mach-mx3/cpu.c b/arch/arm/mach-mx3/cpu.c index d00a7545781..d1d339576fd 100644 --- a/arch/arm/mach-mx3/cpu.c +++ b/arch/arm/mach-mx3/cpu.c @@ -25,15 +25,15 @@ struct mx3_cpu_type { }; static struct mx3_cpu_type mx31_cpu_type[] __initdata = { - { .srev = 0x00, .name = "i.MX31(L)", .v = "1.0", .rev = MX3x_CHIP_REV_1_0 }, - { .srev = 0x10, .name = "i.MX31", .v = "1.1", .rev = MX3x_CHIP_REV_1_1 }, - { .srev = 0x11, .name = "i.MX31L", .v = "1.1", .rev = MX3x_CHIP_REV_1_1 }, - { .srev = 0x12, .name = "i.MX31", .v = "1.15", .rev = MX3x_CHIP_REV_1_1 }, - { .srev = 0x13, .name = "i.MX31L", .v = "1.15", .rev = MX3x_CHIP_REV_1_1 }, - { .srev = 0x14, .name = "i.MX31", .v = "1.2", .rev = MX3x_CHIP_REV_1_2 }, - { .srev = 0x15, .name = "i.MX31L", .v = "1.2", .rev = MX3x_CHIP_REV_1_2 }, - { .srev = 0x28, .name = "i.MX31", .v = "2.0", .rev = MX3x_CHIP_REV_2_0 }, - { .srev = 0x29, .name = "i.MX31L", .v = "2.0", .rev = MX3x_CHIP_REV_2_0 }, + { .srev = 0x00, .name = "i.MX31(L)", .v = "1.0", .rev = IMX_CHIP_REVISION_1_0 }, + { .srev = 0x10, .name = "i.MX31", .v = "1.1", .rev = IMX_CHIP_REVISION_1_1 }, + { .srev = 0x11, .name = "i.MX31L", .v = "1.1", .rev = IMX_CHIP_REVISION_1_1 }, + { .srev = 0x12, .name = "i.MX31", .v = "1.15", .rev = IMX_CHIP_REVISION_1_1 }, + { .srev = 0x13, .name = "i.MX31L", .v = "1.15", .rev = IMX_CHIP_REVISION_1_1 }, + { .srev = 0x14, .name = "i.MX31", .v = "1.2", .rev = IMX_CHIP_REVISION_1_2 }, + { .srev = 0x15, .name = "i.MX31L", .v = "1.2", .rev = IMX_CHIP_REVISION_1_2 }, + { .srev = 0x28, .name = "i.MX31", .v = "2.0", .rev = IMX_CHIP_REVISION_2_0 }, + { .srev = 0x29, .name = "i.MX31L", .v = "2.0", .rev = IMX_CHIP_REVISION_2_0 }, }; void __init mx31_read_cpu_rev(void) @@ -53,6 +53,8 @@ void __init mx31_read_cpu_rev(void) return; } + mx31_cpu_rev = IMX_CHIP_REVISION_UNKNOWN; + printk(KERN_WARNING "Unknown CPU identifier. srev = %02x\n", srev); } @@ -62,22 +64,25 @@ EXPORT_SYMBOL(mx35_cpu_rev); void __init mx35_read_cpu_rev(void) { u32 rev; - char *srev = "unknown"; + char *srev; rev = __raw_readl(MX35_IO_ADDRESS(MX35_IIM_BASE_ADDR + MXC_IIMSREV)); switch (rev) { case 0x00: - mx35_cpu_rev = MX3x_CHIP_REV_1_0; + mx35_cpu_rev = IMX_CHIP_REVISION_1_0; srev = "1.0"; break; case 0x10: - mx35_cpu_rev = MX3x_CHIP_REV_2_0; + mx35_cpu_rev = IMX_CHIP_REVISION_2_0; srev = "2.0"; break; case 0x11: - mx35_cpu_rev = MX3x_CHIP_REV_2_1; + mx35_cpu_rev = IMX_CHIP_REVISION_2_1; srev = "2.1"; break; + default: + mx35_cpu_rev = IMX_CHIP_REVISION_UNKNOWN; + srev = "unknown"; } printk(KERN_INFO "CPU identified as i.MX35, silicon rev %s\n", srev); diff --git a/arch/arm/mach-mx3/devices-imx31.h b/arch/arm/mach-mx3/devices-imx31.h index de9598590eb..40f4e848a67 100644 --- a/arch/arm/mach-mx3/devices-imx31.h +++ b/arch/arm/mach-mx3/devices-imx31.h @@ -9,6 +9,14 @@ #include <mach/mx31.h> #include <mach/devices-common.h> +extern const struct imx_fsl_usb2_udc_data imx31_fsl_usb2_udc_data __initconst; +#define imx31_add_fsl_usb2_udc(pdata) \ + imx_add_fsl_usb2_udc(&imx31_fsl_usb2_udc_data, pdata) + +extern const struct imx_imx2_wdt_data imx31_imx2_wdt_data __initconst; +#define imx31_add_imx2_wdt(pdata) \ + imx_add_imx2_wdt(&imx31_imx2_wdt_data) + extern const struct imx_imx_i2c_data imx31_imx_i2c_data[] __initconst; #define imx31_add_imx_i2c(id, pdata) \ imx_add_imx_i2c(&imx31_imx_i2c_data[id], pdata) @@ -16,6 +24,10 @@ extern const struct imx_imx_i2c_data imx31_imx_i2c_data[] __initconst; #define imx31_add_imx_i2c1(pdata) imx31_add_imx_i2c(1, pdata) #define imx31_add_imx_i2c2(pdata) imx31_add_imx_i2c(2, pdata) +extern const struct imx_imx_keypad_data imx31_imx_keypad_data __initconst; +#define imx31_add_imx_keypad(pdata) \ + imx_add_imx_keypad(&imx31_imx_keypad_data, pdata) + extern const struct imx_imx_ssi_data imx31_imx_ssi_data[] __initconst; #define imx31_add_imx_ssi(id, pdata) \ imx_add_imx_ssi(&imx31_imx_ssi_data[id], pdata) @@ -29,10 +41,25 @@ extern const struct imx_imx_uart_1irq_data imx31_imx_uart_data[] __initconst; #define imx31_add_imx_uart3(pdata) imx31_add_imx_uart(3, pdata) #define imx31_add_imx_uart4(pdata) imx31_add_imx_uart(4, pdata) +extern const struct imx_mxc_ehci_data imx31_mxc_ehci_otg_data __initconst; +#define imx31_add_mxc_ehci_otg(pdata) \ + imx_add_mxc_ehci(&imx31_mxc_ehci_otg_data, pdata) +extern const struct imx_mxc_ehci_data imx31_mxc_ehci_hs_data[] __initconst; +#define imx31_add_mxc_ehci_hs(id, pdata) \ + imx_add_mxc_ehci(&imx31_mxc_ehci_hs_data[id - 1], pdata) + +extern const struct imx_mxc_mmc_data imx31_mxc_mmc_data[] __initconst; +#define imx31_add_mxc_mmc(id, pdata) \ + imx_add_mxc_mmc(&imx31_mxc_mmc_data[id], pdata) + extern const struct imx_mxc_nand_data imx31_mxc_nand_data __initconst; #define imx31_add_mxc_nand(pdata) \ imx_add_mxc_nand(&imx31_mxc_nand_data, pdata) +extern const struct imx_mxc_w1_data imx31_mxc_w1_data __initconst; +#define imx31_add_mxc_w1(pdata) \ + imx_add_mxc_w1(&imx31_mxc_w1_data) + extern const struct imx_spi_imx_data imx31_cspi_data[] __initconst; #define imx31_add_cspi(id, pdata) \ imx_add_spi_imx(&imx31_cspi_data[id], pdata) diff --git a/arch/arm/mach-mx3/devices-imx35.h b/arch/arm/mach-mx3/devices-imx35.h index 5eb917b638d..677b18aa7ae 100644 --- a/arch/arm/mach-mx3/devices-imx35.h +++ b/arch/arm/mach-mx3/devices-imx35.h @@ -13,10 +13,19 @@ extern const struct imx_fec_data imx35_fec_data __initconst; #define imx35_add_fec(pdata) \ imx_add_fec(&imx35_fec_data, pdata) -#define imx35_add_flexcan0(pdata) \ - imx_add_flexcan(0, MX35_CAN1_BASE_ADDR, SZ_16K, MX35_INT_CAN1, pdata) -#define imx35_add_flexcan1(pdata) \ - imx_add_flexcan(1, MX35_CAN2_BASE_ADDR, SZ_16K, MX35_INT_CAN2, pdata) +extern const struct imx_fsl_usb2_udc_data imx35_fsl_usb2_udc_data __initconst; +#define imx35_add_fsl_usb2_udc(pdata) \ + imx_add_fsl_usb2_udc(&imx35_fsl_usb2_udc_data, pdata) + +extern const struct imx_flexcan_data imx35_flexcan_data[] __initconst; +#define imx35_add_flexcan(id, pdata) \ + imx_add_flexcan(&imx35_flexcan_data[id], pdata) +#define imx35_add_flexcan0(pdata) imx35_add_flexcan(0, pdata) +#define imx35_add_flexcan1(pdata) imx35_add_flexcan(1, pdata) + +extern const struct imx_imx2_wdt_data imx35_imx2_wdt_data __initconst; +#define imx35_add_imx2_wdt(pdata) \ + imx_add_imx2_wdt(&imx35_imx2_wdt_data) extern const struct imx_imx_i2c_data imx35_imx_i2c_data[] __initconst; #define imx35_add_imx_i2c(id, pdata) \ @@ -25,6 +34,10 @@ extern const struct imx_imx_i2c_data imx35_imx_i2c_data[] __initconst; #define imx35_add_imx_i2c1(pdata) imx35_add_imx_i2c(1, pdata) #define imx35_add_imx_i2c2(pdata) imx35_add_imx_i2c(2, pdata) +extern const struct imx_imx_keypad_data imx35_imx_keypad_data __initconst; +#define imx31_add_imx_keypad(pdata) \ + imx_add_imx_keypad(&imx35_imx_keypad_data, pdata) + extern const struct imx_imx_ssi_data imx35_imx_ssi_data[] __initconst; #define imx35_add_imx_ssi(id, pdata) \ imx_add_imx_ssi(&imx35_imx_ssi_data[id], pdata) @@ -36,16 +49,28 @@ extern const struct imx_imx_uart_1irq_data imx35_imx_uart_data[] __initconst; #define imx35_add_imx_uart1(pdata) imx35_add_imx_uart(1, pdata) #define imx35_add_imx_uart2(pdata) imx35_add_imx_uart(2, pdata) +extern const struct imx_mxc_ehci_data imx35_mxc_ehci_otg_data __initconst; +#define imx35_add_mxc_ehci_otg(pdata) \ + imx_add_mxc_ehci(&imx35_mxc_ehci_otg_data, pdata) +extern const struct imx_mxc_ehci_data imx35_mxc_ehci_hs_data __initconst; +#define imx35_add_mxc_ehci_hs(pdata) \ + imx_add_mxc_ehci(&imx35_mxc_ehci_hs_data, pdata) + extern const struct imx_mxc_nand_data imx35_mxc_nand_data __initconst; #define imx35_add_mxc_nand(pdata) \ imx_add_mxc_nand(&imx35_mxc_nand_data, pdata) +extern const struct imx_mxc_w1_data imx35_mxc_w1_data __initconst; +#define imx35_add_mxc_w1(pdata) \ + imx_add_mxc_w1(&imx35_mxc_w1_data) + +extern const struct imx_sdhci_esdhc_imx_data +imx35_sdhci_esdhc_imx_data[] __initconst; +#define imx35_add_sdhci_esdhc_imx(id, pdata) \ + imx_add_sdhci_esdhc_imx(&imx35_sdhci_esdhc_imx_data[id], pdata) + extern const struct imx_spi_imx_data imx35_cspi_data[] __initconst; #define imx35_add_cspi(id, pdata) \ imx_add_spi_imx(&imx35_cspi_data[id], pdata) #define imx35_add_spi_imx0(pdata) imx35_add_cspi(0, pdata) #define imx35_add_spi_imx1(pdata) imx35_add_cspi(1, pdata) - -extern const struct imx_esdhc_imx_data imx35_esdhc_data[] __initconst; -#define imx35_add_esdhc(id, pdata) \ - imx_add_esdhc(&imx35_esdhc_data[id], pdata) diff --git a/arch/arm/mach-mx3/devices.c b/arch/arm/mach-mx3/devices.c index d4da9496089..b6672db788f 100644 --- a/arch/arm/mach-mx3/devices.c +++ b/arch/arm/mach-mx3/devices.c @@ -29,120 +29,25 @@ #include "devices.h" -/* GPIO port description */ -static struct mxc_gpio_port imx_gpio_ports[] = { - { - .chip.label = "gpio-0", - .base = IO_ADDRESS(GPIO1_BASE_ADDR), - .irq = MXC_INT_GPIO1, - .virtual_irq_start = MXC_GPIO_IRQ_START, - }, { - .chip.label = "gpio-1", - .base = IO_ADDRESS(GPIO2_BASE_ADDR), - .irq = MXC_INT_GPIO2, - .virtual_irq_start = MXC_GPIO_IRQ_START + 32, - }, { - .chip.label = "gpio-2", - .base = IO_ADDRESS(GPIO3_BASE_ADDR), - .irq = MXC_INT_GPIO3, - .virtual_irq_start = MXC_GPIO_IRQ_START + 64, - } -}; - -int __init imx3x_register_gpios(void) -{ - return mxc_gpio_init(imx_gpio_ports, ARRAY_SIZE(imx_gpio_ports)); -} - -static struct resource mxc_w1_master_resources[] = { - { - .start = OWIRE_BASE_ADDR, - .end = OWIRE_BASE_ADDR + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, -}; - -struct platform_device mxc_w1_master_device = { - .name = "mxc_w1", - .id = 0, - .num_resources = ARRAY_SIZE(mxc_w1_master_resources), - .resource = mxc_w1_master_resources, -}; - -#ifdef CONFIG_ARCH_MX31 -static struct resource mxcsdhc0_resources[] = { - { - .start = MX31_MMC_SDHC1_BASE_ADDR, - .end = MX31_MMC_SDHC1_BASE_ADDR + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, { - .start = MX31_INT_MMC_SDHC1, - .end = MX31_INT_MMC_SDHC1, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct resource mxcsdhc1_resources[] = { - { - .start = MX31_MMC_SDHC2_BASE_ADDR, - .end = MX31_MMC_SDHC2_BASE_ADDR + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, { - .start = MX31_INT_MMC_SDHC2, - .end = MX31_INT_MMC_SDHC2, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device mxcsdhc_device0 = { - .name = "mxc-mmc", - .id = 0, - .num_resources = ARRAY_SIZE(mxcsdhc0_resources), - .resource = mxcsdhc0_resources, -}; - -struct platform_device mxcsdhc_device1 = { - .name = "mxc-mmc", - .id = 1, - .num_resources = ARRAY_SIZE(mxcsdhc1_resources), - .resource = mxcsdhc1_resources, -}; - -static struct resource rnga_resources[] = { - { - .start = RNGA_BASE_ADDR, - .end = RNGA_BASE_ADDR + 0x28, - .flags = IORESOURCE_MEM, - }, -}; - -struct platform_device mxc_rnga_device = { - .name = "mxc_rnga", - .id = -1, - .num_resources = 1, - .resource = rnga_resources, -}; -#endif /* CONFIG_ARCH_MX31 */ - /* i.MX31 Image Processing Unit */ /* The resource order is important! */ static struct resource mx3_ipu_rsrc[] = { { - .start = IPU_CTRL_BASE_ADDR, - .end = IPU_CTRL_BASE_ADDR + 0x5F, + .start = MX3x_IPU_CTRL_BASE_ADDR, + .end = MX3x_IPU_CTRL_BASE_ADDR + 0x5F, .flags = IORESOURCE_MEM, }, { - .start = IPU_CTRL_BASE_ADDR + 0x88, - .end = IPU_CTRL_BASE_ADDR + 0xB3, + .start = MX3x_IPU_CTRL_BASE_ADDR + 0x88, + .end = MX3x_IPU_CTRL_BASE_ADDR + 0xB3, .flags = IORESOURCE_MEM, }, { - .start = MXC_INT_IPU_SYN, - .end = MXC_INT_IPU_SYN, + .start = MX3x_INT_IPU_SYN, + .end = MX3x_INT_IPU_SYN, .flags = IORESOURCE_IRQ, }, { - .start = MXC_INT_IPU_ERR, - .end = MXC_INT_IPU_ERR, + .start = MX3x_INT_IPU_ERR, + .end = MX3x_INT_IPU_ERR, .flags = IORESOURCE_IRQ, }, }; @@ -156,8 +61,8 @@ struct platform_device mx3_ipu = { static struct resource fb_resources[] = { { - .start = IPU_CTRL_BASE_ADDR + 0xB4, - .end = IPU_CTRL_BASE_ADDR + 0x1BF, + .start = MX3x_IPU_CTRL_BASE_ADDR + 0xB4, + .end = MX3x_IPU_CTRL_BASE_ADDR + 0x1BF, .flags = IORESOURCE_MEM, }, }; @@ -174,8 +79,8 @@ struct platform_device mx3_fb = { static struct resource camera_resources[] = { { - .start = IPU_CTRL_BASE_ADDR + 0x60, - .end = IPU_CTRL_BASE_ADDR + 0x87, + .start = MX3x_IPU_CTRL_BASE_ADDR + 0x60, + .end = MX3x_IPU_CTRL_BASE_ADDR + 0x87, .flags = IORESOURCE_MEM, }, }; @@ -190,110 +95,6 @@ struct platform_device mx3_camera = { }, }; -static struct resource otg_resources[] = { - { - .start = MX31_OTG_BASE_ADDR, - .end = MX31_OTG_BASE_ADDR + 0x1ff, - .flags = IORESOURCE_MEM, - }, { - .start = MXC_INT_USB3, - .end = MXC_INT_USB3, - .flags = IORESOURCE_IRQ, - }, -}; - -static u64 otg_dmamask = DMA_BIT_MASK(32); - -/* OTG gadget device */ -struct platform_device mxc_otg_udc_device = { - .name = "fsl-usb2-udc", - .id = -1, - .dev = { - .dma_mask = &otg_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, - .resource = otg_resources, - .num_resources = ARRAY_SIZE(otg_resources), -}; - -/* OTG host */ -struct platform_device mxc_otg_host = { - .name = "mxc-ehci", - .id = 0, - .dev = { - .coherent_dma_mask = 0xffffffff, - .dma_mask = &otg_dmamask, - }, - .resource = otg_resources, - .num_resources = ARRAY_SIZE(otg_resources), -}; - -/* USB host 1 */ - -static u64 usbh1_dmamask = ~(u32)0; - -static struct resource mxc_usbh1_resources[] = { - { - .start = MX31_OTG_BASE_ADDR + 0x200, - .end = MX31_OTG_BASE_ADDR + 0x3ff, - .flags = IORESOURCE_MEM, - }, { - .start = MXC_INT_USB1, - .end = MXC_INT_USB1, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device mxc_usbh1 = { - .name = "mxc-ehci", - .id = 1, - .dev = { - .coherent_dma_mask = 0xffffffff, - .dma_mask = &usbh1_dmamask, - }, - .resource = mxc_usbh1_resources, - .num_resources = ARRAY_SIZE(mxc_usbh1_resources), -}; - -/* USB host 2 */ -static u64 usbh2_dmamask = ~(u32)0; - -static struct resource mxc_usbh2_resources[] = { - { - .start = MX31_OTG_BASE_ADDR + 0x400, - .end = MX31_OTG_BASE_ADDR + 0x5ff, - .flags = IORESOURCE_MEM, - }, { - .start = MXC_INT_USB2, - .end = MXC_INT_USB2, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device mxc_usbh2 = { - .name = "mxc-ehci", - .id = 2, - .dev = { - .coherent_dma_mask = 0xffffffff, - .dma_mask = &usbh2_dmamask, - }, - .resource = mxc_usbh2_resources, - .num_resources = ARRAY_SIZE(mxc_usbh2_resources), -}; - -static struct resource imx_wdt_resources[] = { - { - .flags = IORESOURCE_MEM, - }, -}; - -struct platform_device imx_wdt_device0 = { - .name = "imx2-wdt", - .id = 0, - .num_resources = ARRAY_SIZE(imx_wdt_resources), - .resource = imx_wdt_resources, -}; - static struct resource imx_rtc_resources[] = { { .start = MX31_RTC_BASE_ADDR, @@ -312,51 +113,3 @@ struct platform_device imx_rtc_device0 = { .num_resources = ARRAY_SIZE(imx_rtc_resources), .resource = imx_rtc_resources, }; - -static struct resource imx_kpp_resources[] = { - { - .start = MX3x_KPP_BASE_ADDR, - .end = MX3x_KPP_BASE_ADDR + 0xf, - .flags = IORESOURCE_MEM - }, { - .start = MX3x_INT_KPP, - .end = MX3x_INT_KPP, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device imx_kpp_device = { - .name = "imx-keypad", - .id = -1, - .num_resources = ARRAY_SIZE(imx_kpp_resources), - .resource = imx_kpp_resources, -}; - -static int __init mx3_devices_init(void) -{ -#if defined(CONFIG_ARCH_MX31) - if (cpu_is_mx31()) { - imx_wdt_resources[0].start = MX31_WDOG_BASE_ADDR; - imx_wdt_resources[0].end = MX31_WDOG_BASE_ADDR + 0x3fff; - mxc_register_device(&mxc_rnga_device, NULL); - } -#endif -#if defined(CONFIG_ARCH_MX35) - if (cpu_is_mx35()) { - otg_resources[0].start = MX35_OTG_BASE_ADDR; - otg_resources[0].end = MX35_OTG_BASE_ADDR + 0x1ff; - otg_resources[1].start = MXC_INT_USBOTG; - otg_resources[1].end = MXC_INT_USBOTG; - mxc_usbh1_resources[0].start = MX35_OTG_BASE_ADDR + 0x400; - mxc_usbh1_resources[0].end = MX35_OTG_BASE_ADDR + 0x5ff; - mxc_usbh1_resources[1].start = MXC_INT_USBHS; - mxc_usbh1_resources[1].end = MXC_INT_USBHS; - imx_wdt_resources[0].start = MX35_WDOG_BASE_ADDR; - imx_wdt_resources[0].end = MX35_WDOG_BASE_ADDR + 0x3fff; - } -#endif - - return 0; -} - -subsys_initcall(mx3_devices_init); diff --git a/arch/arm/mach-mx3/devices.h b/arch/arm/mach-mx3/devices.h index 585f814473d..121962c568d 100644 --- a/arch/arm/mach-mx3/devices.h +++ b/arch/arm/mach-mx3/devices.h @@ -1,14 +1,4 @@ -extern struct platform_device mxc_w1_master_device; extern struct platform_device mx3_ipu; extern struct platform_device mx3_fb; extern struct platform_device mx3_camera; -extern struct platform_device mxcsdhc_device0; -extern struct platform_device mxcsdhc_device1; -extern struct platform_device mxc_otg_udc_device; -extern struct platform_device mxc_otg_host; -extern struct platform_device mxc_usbh1; -extern struct platform_device mxc_usbh2; -extern struct platform_device mxc_rnga_device; -extern struct platform_device imx_wdt_device0; extern struct platform_device imx_rtc_device0; -extern struct platform_device imx_kpp_device; diff --git a/arch/arm/mach-mx3/eukrea_mbimxsd-baseboard.c b/arch/arm/mach-mx3/eukrea_mbimxsd-baseboard.c index 1abc10d5292..14a5ffc939a 100644 --- a/arch/arm/mach-mx3/eukrea_mbimxsd-baseboard.c +++ b/arch/arm/mach-mx3/eukrea_mbimxsd-baseboard.c @@ -111,7 +111,7 @@ static struct mx3fb_platform_data mx3fb_pdata = { .num_modes = ARRAY_SIZE(fb_modedb), }; -static struct pad_desc eukrea_mbimxsd_pads[] = { +static iomux_v3_cfg_t eukrea_mbimxsd_pads[] = { /* LCD */ MX35_PAD_LD0__IPU_DISPB_DAT_0, MX35_PAD_LD1__IPU_DISPB_DAT_1, @@ -289,7 +289,7 @@ void __init eukrea_mbimxsd35_baseboard_init(void) imx35_add_imx_ssi(0, &eukrea_mbimxsd_ssi_pdata); imx35_add_flexcan1(NULL); - imx35_add_esdhc(0, NULL); + imx35_add_sdhci_esdhc_imx(0, NULL); gpio_request(GPIO_LED1, "LED1"); gpio_direction_output(GPIO_LED1, 1); diff --git a/arch/arm/mach-mx3/mach-armadillo5x0.c b/arch/arm/mach-mx3/mach-armadillo5x0.c index aaa30fe18f8..28b6f414b5d 100644 --- a/arch/arm/mach-mx3/mach-armadillo5x0.c +++ b/arch/arm/mach-mx3/mach-armadillo5x0.c @@ -49,10 +49,8 @@ #include <mach/common.h> #include <mach/iomux-mx3.h> -#include <mach/mmc.h> #include <mach/ipu.h> #include <mach/mx3fb.h> -#include <mach/mxc_ehci.h> #include <mach/ulpi.h> #include "devices-imx31.h" @@ -245,13 +243,13 @@ h2_free_cs: return err; } -static struct mxc_usbh_platform_data usbotg_pdata = { +static struct mxc_usbh_platform_data usbotg_pdata __initdata = { .init = usbotg_init, .portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT, .flags = MXC_EHCI_POWER_PINS_ENABLED | MXC_EHCI_INTERFACE_DIFF_UNI, }; -static struct mxc_usbh_platform_data usbh2_pdata = { +static struct mxc_usbh_platform_data usbh2_pdata __initdata = { .init = usbh2_init, .portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT, .flags = MXC_EHCI_POWER_PINS_ENABLED | MXC_EHCI_INTERFACE_DIFF_UNI, @@ -453,7 +451,7 @@ static void armadillo5x0_sdhc1_exit(struct device *dev, void *data) gpio_free(IOMUX_TO_GPIO(MX31_PIN_ATA_RESET_B)); } -static struct imxmmc_platform_data sdhc_pdata = { +static const struct imxmmc_platform_data sdhc_pdata __initconst = { .get_ro = armadillo5x0_sdhc1_get_ro, .init = armadillo5x0_sdhc1_init, .exit = armadillo5x0_sdhc1_exit, @@ -520,7 +518,7 @@ static void __init armadillo5x0_init(void) gpio_direction_input(MX31_PIN_GPIO1_0); /* Register SDHC */ - mxc_register_device(&mxcsdhc_device0, &sdhc_pdata); + imx31_add_mxc_mmc(0, &sdhc_pdata); /* Register FB */ mxc_register_device(&mx3_ipu, &mx3_ipu_data); @@ -555,8 +553,8 @@ static void __init armadillo5x0_init(void) usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops, ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT); - mxc_register_device(&mxc_otg_host, &usbotg_pdata); - mxc_register_device(&mxc_usbh2, &usbh2_pdata); + imx31_add_mxc_ehci_otg(&usbotg_pdata); + imx31_add_mxc_ehci_hs(2, &usbh2_pdata); #endif } diff --git a/arch/arm/mach-mx3/mach-cpuimx35.c b/arch/arm/mach-mx3/mach-cpuimx35.c index 9fde873f588..26ae90f0258 100644 --- a/arch/arm/mach-mx3/mach-cpuimx35.c +++ b/arch/arm/mach-mx3/mach-cpuimx35.c @@ -30,7 +30,6 @@ #include <linux/i2c/tsc2007.h> #include <linux/usb/otg.h> #include <linux/usb/ulpi.h> -#include <linux/fsl_devices.h> #include <linux/i2c-gpio.h> #include <asm/mach-types.h> @@ -43,7 +42,6 @@ #include <mach/common.h> #include <mach/iomux-mx35.h> #include <mach/mxc_nand.h> -#include <mach/mxc_ehci.h> #include "devices-imx35.h" #include "devices.h" @@ -74,11 +72,7 @@ static struct i2c_board_info eukrea_cpuimx35_i2c_devices[] = { }, }; -static struct platform_device *devices[] __initdata = { - &imx_wdt_device0, -}; - -static struct pad_desc eukrea_cpuimx35_pads[] = { +static iomux_v3_cfg_t eukrea_cpuimx35_pads[] = { /* UART1 */ MX35_PAD_CTS1__UART1_CTS, MX35_PAD_RTS1__UART1_RTS, @@ -117,18 +111,18 @@ static const struct mxc_nand_platform_data .flash_bbt = 1, }; -static struct mxc_usbh_platform_data __maybe_unused otg_pdata = { +static const struct mxc_usbh_platform_data otg_pdata __initconst = { .portsc = MXC_EHCI_MODE_UTMI, .flags = MXC_EHCI_INTERFACE_DIFF_UNI, }; -static struct mxc_usbh_platform_data __maybe_unused usbh1_pdata = { +static const struct mxc_usbh_platform_data usbh1_pdata __initconst = { .portsc = MXC_EHCI_MODE_SERIAL, .flags = MXC_EHCI_INTERFACE_SINGLE_UNI | MXC_EHCI_INTERNAL_PHY | MXC_EHCI_IPPUE_DOWN, }; -static struct fsl_usb2_platform_data otg_device_pdata = { +static const struct fsl_usb2_platform_data otg_device_pdata __initconst = { .operating_mode = FSL_USB2_DR_DEVICE, .phy_mode = FSL_USB2_PHY_UTMI, .workaround = FLS_USB2_WORKAROUND_ENGCM09152, @@ -158,7 +152,7 @@ static void __init mxc_board_init(void) ARRAY_SIZE(eukrea_cpuimx35_pads)); imx35_add_fec(NULL); - platform_add_devices(devices, ARRAY_SIZE(devices)); + imx35_add_imx2_wdt(NULL); imx35_add_imx_uart0(&uart_pdata); imx35_add_mxc_nand(&eukrea_cpuimx35_nand_board_info); @@ -168,11 +162,11 @@ static void __init mxc_board_init(void) imx35_add_imx_i2c0(&eukrea_cpuimx35_i2c0_data); if (otg_mode_host) - mxc_register_device(&mxc_otg_host, &otg_pdata); + imx35_add_mxc_ehci_otg(&otg_pdata); else - mxc_register_device(&mxc_otg_udc_device, &otg_device_pdata); + imx35_add_fsl_usb2_udc(&otg_device_pdata); - mxc_register_device(&mxc_usbh1, &usbh1_pdata); + imx35_add_mxc_ehci_hs(&usbh1_pdata); #ifdef CONFIG_MACH_EUKREA_MBIMXSD35_BASEBOARD eukrea_mbimxsd35_baseboard_init(); diff --git a/arch/arm/mach-mx3/mach-kzm_arm11_01.c b/arch/arm/mach-mx3/mach-kzm_arm11_01.c index 042cd5655e1..a5f3eb24e4d 100644 --- a/arch/arm/mach-mx3/mach-kzm_arm11_01.c +++ b/arch/arm/mach-mx3/mach-kzm_arm11_01.c @@ -41,9 +41,9 @@ #include "devices-imx31.h" #include "devices.h" -#define KZM_ARM11_IO_ADDRESS(x) ( \ - IMX_IO_ADDRESS(x, MX31_CS4) ?: \ - IMX_IO_ADDRESS(x, MX31_CS5) ?: \ +#define KZM_ARM11_IO_ADDRESS(x) (IOMEM( \ + IMX_IO_P2V_MODULE(x, MX31_CS4) ?: \ + IMX_IO_P2V_MODULE(x, MX31_CS5)) ?: \ MX31_IO_ADDRESS(x)) /* diff --git a/arch/arm/mach-mx3/mach-mx31_3ds.c b/arch/arm/mach-mx3/mach-mx31_3ds.c index 0ad9e782108..4e516b49a90 100644 --- a/arch/arm/mach-mx3/mach-mx31_3ds.c +++ b/arch/arm/mach-mx3/mach-mx31_3ds.c @@ -22,8 +22,8 @@ #include <linux/mfd/mc13783.h> #include <linux/spi/spi.h> #include <linux/regulator/machine.h> -#include <linux/fsl_devices.h> -#include <linux/input/matrix_keypad.h> +#include <linux/usb/otg.h> +#include <linux/usb/ulpi.h> #include <mach/hardware.h> #include <asm/mach-types.h> @@ -34,6 +34,7 @@ #include <mach/common.h> #include <mach/iomux-mx3.h> #include <mach/3ds_debugboard.h> +#include <mach/ulpi.h> #include "devices-imx31.h" #include "devices.h" @@ -84,6 +85,21 @@ static int mx31_3ds_pins[] = { MX31_PIN_KEY_COL1_KEY_COL1, MX31_PIN_KEY_COL2_KEY_COL2, MX31_PIN_KEY_COL3_KEY_COL3, + /* USB Host 2 */ + IOMUX_MODE(MX31_PIN_USBH2_CLK, IOMUX_CONFIG_FUNC), + IOMUX_MODE(MX31_PIN_USBH2_DIR, IOMUX_CONFIG_FUNC), + IOMUX_MODE(MX31_PIN_USBH2_NXT, IOMUX_CONFIG_FUNC), + IOMUX_MODE(MX31_PIN_USBH2_STP, IOMUX_CONFIG_FUNC), + IOMUX_MODE(MX31_PIN_USBH2_DATA0, IOMUX_CONFIG_FUNC), + IOMUX_MODE(MX31_PIN_USBH2_DATA1, IOMUX_CONFIG_FUNC), + IOMUX_MODE(MX31_PIN_PC_VS2, IOMUX_CONFIG_ALT1), + IOMUX_MODE(MX31_PIN_PC_BVD1, IOMUX_CONFIG_ALT1), + IOMUX_MODE(MX31_PIN_PC_BVD2, IOMUX_CONFIG_ALT1), + IOMUX_MODE(MX31_PIN_PC_RST, IOMUX_CONFIG_ALT1), + IOMUX_MODE(MX31_PIN_IOIS16, IOMUX_CONFIG_ALT1), + IOMUX_MODE(MX31_PIN_PC_RW_B, IOMUX_CONFIG_ALT1), + /* USB Host2 reset */ + IOMUX_MODE(MX31_PIN_USB_BYP, IOMUX_CONFIG_GPIO), }; /* @@ -102,7 +118,7 @@ static const uint32_t mx31_3ds_keymap[] = { KEY(2, 3, KEY_F10), }; -static struct matrix_keymap_data mx31_3ds_keymap_data = { +static const struct matrix_keymap_data mx31_3ds_keymap_data __initconst = { .keymap = mx31_3ds_keymap, .keymap_size = ARRAY_SIZE(mx31_3ds_keymap), }; @@ -115,6 +131,13 @@ static struct regulator_init_data pwgtx_init = { }, }; +static struct regulator_init_data gpo_init = { + .constraints = { + .boot_on = 1, + .always_on = 1, + } +}; + static struct mc13783_regulator_init_data mx31_3ds_regulators[] = { { .id = MC13783_REGU_PWGT1SPI, /* Power Gate for ARM core. */ @@ -122,6 +145,13 @@ static struct mc13783_regulator_init_data mx31_3ds_regulators[] = { }, { .id = MC13783_REGU_PWGT2SPI, /* Power Gate for L2 Cache. */ .init_data = &pwgtx_init, + }, { + + .id = MC13783_REGU_GPO1, /* Turn on 1.8V */ + .init_data = &gpo_init, + }, { + .id = MC13783_REGU_GPO3, /* Turn on 3.3V */ + .init_data = &gpo_init, }, }; @@ -129,7 +159,7 @@ static struct mc13783_regulator_init_data mx31_3ds_regulators[] = { static struct mc13783_platform_data mc13783_pdata __initdata = { .regulators = mx31_3ds_regulators, .num_regulators = ARRAY_SIZE(mx31_3ds_regulators), - .flags = MC13783_USE_REGULATOR, + .flags = MC13783_USE_REGULATOR | MC13783_USE_TOUCHSCREEN, }; /* SPI */ @@ -175,6 +205,7 @@ mx31_3ds_nand_board_info __initconst = { PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU) #define USBOTG_RST_B IOMUX_TO_GPIO(MX31_PIN_USB_PWR) +#define USBH2_RST_B IOMUX_TO_GPIO(MX31_PIN_USB_BYP) static int mx31_3ds_usbotg_init(void) { @@ -214,11 +245,77 @@ usbotg_free_reset: return err; } -static struct fsl_usb2_platform_data usbotg_pdata = { +static int mx31_3ds_host2_init(struct platform_device *pdev) +{ + int err; + + mxc_iomux_set_pad(MX31_PIN_USBH2_CLK, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBH2_DIR, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBH2_NXT, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBH2_STP, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBH2_DATA0, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBH2_DATA1, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_PC_VS2, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_PC_BVD1, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_PC_BVD2, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_PC_RST, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_IOIS16, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_PC_RW_B, USB_PAD_CFG); + + err = gpio_request(USBH2_RST_B, "usbh2-reset"); + if (err) { + pr_err("Failed to request the USB Host 2 reset gpio\n"); + return err; + } + + err = gpio_direction_output(USBH2_RST_B, 0); + if (err) { + pr_err("Failed to drive the USB Host 2 reset gpio\n"); + goto usbotg_free_reset; + } + + mdelay(1); + gpio_set_value(USBH2_RST_B, 1); + return 0; + +usbotg_free_reset: + gpio_free(USBH2_RST_B); + return err; +} + +#if defined(CONFIG_USB_ULPI) +static struct mxc_usbh_platform_data otg_pdata __initdata = { + .portsc = MXC_EHCI_MODE_ULPI, + .flags = MXC_EHCI_POWER_PINS_ENABLED, +}; + +static struct mxc_usbh_platform_data usbh2_pdata __initdata = { + .init = mx31_3ds_host2_init, + .portsc = MXC_EHCI_MODE_ULPI, + .flags = MXC_EHCI_POWER_PINS_ENABLED, +}; +#endif + +static const struct fsl_usb2_platform_data usbotg_pdata __initconst = { .operating_mode = FSL_USB2_DR_DEVICE, .phy_mode = FSL_USB2_PHY_ULPI, }; +static int otg_mode_host; + +static int __init mx31_3ds_otg_mode(char *options) +{ + if (!strcmp(options, "host")) + otg_mode_host = 1; + else if (!strcmp(options, "device")) + otg_mode_host = 0; + else + pr_info("otg_mode neither \"host\" nor \"device\". " + "Defaulting to device\n"); + return 0; +} +__setup("otg_mode=", mx31_3ds_otg_mode); + static const struct imxuart_platform_data uart_pdata __initconst = { .flags = IMXUART_HAVE_RTSCTS, }; @@ -246,14 +343,27 @@ static void __init mxc_board_init(void) spi_register_board_info(mx31_3ds_spi_devs, ARRAY_SIZE(mx31_3ds_spi_devs)); - mxc_register_device(&imx_kpp_device, &mx31_3ds_keymap_data); + imx31_add_imx_keypad(&mx31_3ds_keymap_data); mx31_3ds_usbotg_init(); - mxc_register_device(&mxc_otg_udc_device, &usbotg_pdata); +#if defined(CONFIG_USB_ULPI) + if (otg_mode_host) { + otg_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops, + ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT); + + imx31_add_mxc_ehci_otg(&otg_pdata); + } + usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops, + ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT); + imx31_add_mxc_ehci_hs(2, &usbh2_pdata); +#endif + if (!otg_mode_host) + imx31_add_fsl_usb2_udc(&usbotg_pdata); if (mxc_expio_init(MX31_CS5_BASE_ADDR, EXPIO_PARENT_INT)) printk(KERN_WARNING "Init of the debug board failed, all " "devices on the debug board are unusable.\n"); + imx31_add_imx2_wdt(NULL); } static void __init mx31_3ds_timer_init(void) diff --git a/arch/arm/mach-mx3/mach-mx31lilly.c b/arch/arm/mach-mx3/mach-mx31lilly.c index 42f47faa6fd..2c595483f35 100644 --- a/arch/arm/mach-mx3/mach-mx31lilly.c +++ b/arch/arm/mach-mx3/mach-mx31lilly.c @@ -42,7 +42,6 @@ #include <mach/common.h> #include <mach/iomux-mx3.h> #include <mach/board-mx31lilly.h> -#include <mach/mxc_ehci.h> #include <mach/ulpi.h> #include "devices-imx31.h" @@ -230,13 +229,13 @@ static struct mxc_usbh_platform_data usbotg_pdata = { .flags = MXC_EHCI_POWER_PINS_ENABLED, }; -static struct mxc_usbh_platform_data usbh1_pdata = { +static const struct mxc_usbh_platform_data usbh1_pdata __initconst = { .init = usbh1_init, .portsc = MXC_EHCI_MODE_UTMI | MXC_EHCI_SERIAL, .flags = MXC_EHCI_POWER_PINS_ENABLED | MXC_EHCI_INTERFACE_SINGLE_UNI, }; -static struct mxc_usbh_platform_data usbh2_pdata = { +static struct mxc_usbh_platform_data usbh2_pdata __initdata = { .init = usbh2_init, .portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT, .flags = MXC_EHCI_POWER_PINS_ENABLED, @@ -249,8 +248,8 @@ static void lilly1131_usb_init(void) usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops, ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT); - mxc_register_device(&mxc_usbh1, &usbh1_pdata); - mxc_register_device(&mxc_usbh2, &usbh2_pdata); + imx31_add_mxc_ehci_hs(1, &usbh1_pdata); + imx31_add_mxc_ehci_hs(2, &usbh2_pdata); } #else diff --git a/arch/arm/mach-mx3/mach-mx31lite.c b/arch/arm/mach-mx3/mach-mx31lite.c index b93895814cd..9e64c66396e 100644 --- a/arch/arm/mach-mx3/mach-mx31lite.c +++ b/arch/arm/mach-mx3/mach-mx31lite.c @@ -40,7 +40,6 @@ #include <mach/board-mx31lite.h> #include <mach/iomux-mx3.h> #include <mach/irqs.h> -#include <mach/mxc_ehci.h> #include <mach/ulpi.h> #include "devices-imx31.h" @@ -171,7 +170,7 @@ static int usbh2_init(struct platform_device *pdev) return 0; } -static struct mxc_usbh_platform_data usbh2_pdata = { +static struct mxc_usbh_platform_data usbh2_pdata __initdata = { .init = usbh2_init, .portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT, .flags = MXC_EHCI_POWER_PINS_ENABLED, @@ -258,7 +257,7 @@ static void __init mxc_board_init(void) usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops, ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT); - mxc_register_device(&mxc_usbh2, &usbh2_pdata); + imx31_add_mxc_ehci_hs(2, &usbh2_pdata); #endif /* SMSC9117 IRQ pin */ diff --git a/arch/arm/mach-mx3/mach-mx31moboard.c b/arch/arm/mach-mx3/mach-mx31moboard.c index eb5f426df22..203d21a510a 100644 --- a/arch/arm/mach-mx3/mach-mx31moboard.c +++ b/arch/arm/mach-mx3/mach-mx31moboard.c @@ -40,8 +40,6 @@ #include <mach/hardware.h> #include <mach/iomux-mx3.h> #include <mach/ipu.h> -#include <mach/mmc.h> -#include <mach/mxc_ehci.h> #include <mach/mx3_camera.h> #include <mach/spi.h> #include <mach/ulpi.h> @@ -170,11 +168,11 @@ static const struct spi_imx_master moboard_spi1_pdata __initconst = { static struct regulator_consumer_supply sdhc_consumers[] = { { - .dev = &mxcsdhc_device0.dev, + .dev_name = "mxc-mmc.0", .supply = "sdhc0_vcc", }, { - .dev = &mxcsdhc_device1.dev, + .dev_name = "mxc-mmc.1", .supply = "sdhc1_vcc", }, }; @@ -345,7 +343,7 @@ static void moboard_sdhc1_exit(struct device *dev, void *data) gpio_free(SDHC1_CD); } -static struct imxmmc_platform_data sdhc1_pdata = { +static const struct imxmmc_platform_data sdhc1_pdata __initconst = { .get_ro = moboard_sdhc1_get_ro, .init = moboard_sdhc1_init, .exit = moboard_sdhc1_exit, @@ -404,17 +402,23 @@ static void usb_xcvr_reset(void) #if defined(CONFIG_USB_ULPI) -static struct mxc_usbh_platform_data usbh2_pdata = { +static struct mxc_usbh_platform_data usbh2_pdata __initdata = { .portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT, .flags = MXC_EHCI_POWER_PINS_ENABLED, }; static int __init moboard_usbh2_init(void) { + struct platform_device *pdev; + usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops, ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT); - return mxc_register_device(&mxc_usbh2, &usbh2_pdata); + pdev = imx31_add_mxc_ehci_hs(2, &usbh2_pdata); + if (IS_ERR(pdev)) + return PTR_ERR(pdev); + + return 0; } #else static inline int moboard_usbh2_init(void) { return 0; } @@ -520,7 +524,7 @@ static void __init mxc_board_init(void) spi_register_board_info(moboard_spi_board_info, ARRAY_SIZE(moboard_spi_board_info)); - mxc_register_device(&mxcsdhc_device0, &sdhc1_pdata); + imx31_add_mxc_mmc(0, &sdhc1_pdata); mxc_register_device(&mx3_ipu, &mx3_ipu_data); if (!mx31moboard_cam_alloc_dma(CAMERA_BUF_SIZE)) diff --git a/arch/arm/mach-mx3/mach-mx35_3ds.c b/arch/arm/mach-mx3/mach-mx35_3ds.c index b66a75aa2e8..b1963f257c2 100644 --- a/arch/arm/mach-mx3/mach-mx35_3ds.c +++ b/arch/arm/mach-mx3/mach-mx35_3ds.c @@ -26,7 +26,7 @@ #include <linux/platform_device.h> #include <linux/memory.h> #include <linux/gpio.h> -#include <linux/fsl_devices.h> +#include <linux/usb/otg.h> #include <linux/mtd/physmap.h> @@ -40,7 +40,6 @@ #include <mach/iomux-mx35.h> #include <mach/irqs.h> #include <mach/3ds_debugboard.h> -#include <mach/mxc_ehci.h> #include "devices-imx35.h" #include "devices.h" @@ -81,7 +80,7 @@ static struct platform_device *devices[] __initdata = { &mx35pdk_flash, }; -static struct pad_desc mx35pdk_pads[] = { +static iomux_v3_cfg_t mx35pdk_pads[] = { /* UART1 */ MX35_PAD_CTS1__UART1_CTS, MX35_PAD_RTS1__UART1_RTS, @@ -122,18 +121,38 @@ static struct pad_desc mx35pdk_pads[] = { }; /* OTG config */ -static struct fsl_usb2_platform_data usb_otg_pdata = { +static const struct fsl_usb2_platform_data usb_otg_pdata __initconst = { .operating_mode = FSL_USB2_DR_DEVICE, .phy_mode = FSL_USB2_PHY_UTMI_WIDE, }; +static struct mxc_usbh_platform_data otg_pdata __initdata = { + .portsc = MXC_EHCI_MODE_UTMI, + .flags = MXC_EHCI_INTERNAL_PHY, +}; + /* USB HOST config */ -static struct mxc_usbh_platform_data usb_host_pdata = { +static const struct mxc_usbh_platform_data usb_host_pdata __initconst = { .portsc = MXC_EHCI_MODE_SERIAL, .flags = MXC_EHCI_INTERFACE_SINGLE_UNI | MXC_EHCI_INTERNAL_PHY, }; +static int otg_mode_host; + +static int __init mx35_3ds_otg_mode(char *options) +{ + if (!strcmp(options, "host")) + otg_mode_host = 1; + else if (!strcmp(options, "device")) + otg_mode_host = 0; + else + pr_info("otg_mode neither \"host\" nor \"device\". " + "Defaulting to device\n"); + return 0; +} +__setup("otg_mode=", mx35_3ds_otg_mode); + /* * Board specific initialization. */ @@ -142,16 +161,21 @@ static void __init mxc_board_init(void) mxc_iomux_v3_setup_multiple_pads(mx35pdk_pads, ARRAY_SIZE(mx35pdk_pads)); imx35_add_fec(NULL); + imx35_add_imx2_wdt(NULL); platform_add_devices(devices, ARRAY_SIZE(devices)); imx35_add_imx_uart0(&uart_pdata); - mxc_register_device(&mxc_otg_udc_device, &usb_otg_pdata); + if (otg_mode_host) + imx35_add_mxc_ehci_otg(&otg_pdata); + + imx35_add_mxc_ehci_hs(&usb_host_pdata); - mxc_register_device(&mxc_usbh1, &usb_host_pdata); + if (!otg_mode_host) + imx35_add_fsl_usb2_udc(&usb_otg_pdata); imx35_add_mxc_nand(&mx35pdk_nand_board_info); - imx35_add_esdhc(0, NULL); + imx35_add_sdhci_esdhc_imx(0, NULL); if (mxc_expio_init(MX35_CS5_BASE_ADDR, EXPIO_PARENT_INT)) pr_warn("Init of the debugboard failed, all " diff --git a/arch/arm/mach-mx3/mach-pcm037.c b/arch/arm/mach-mx3/mach-pcm037.c index 2ff3f661a48..b752f6bc20a 100644 --- a/arch/arm/mach-mx3/mach-pcm037.c +++ b/arch/arm/mach-mx3/mach-pcm037.c @@ -27,7 +27,6 @@ #include <linux/delay.h> #include <linux/spi/spi.h> #include <linux/irq.h> -#include <linux/fsl_devices.h> #include <linux/can/platform/sja1000.h> #include <linux/usb/otg.h> #include <linux/usb/ulpi.h> @@ -43,10 +42,8 @@ #include <mach/hardware.h> #include <mach/iomux-mx3.h> #include <mach/ipu.h> -#include <mach/mmc.h> #include <mach/mx3_camera.h> #include <mach/mx3fb.h> -#include <mach/mxc_ehci.h> #include <mach/ulpi.h> #include "devices-imx31.h" @@ -399,7 +396,7 @@ static void pcm970_sdhc1_exit(struct device *dev, void *data) gpio_free(SDHC1_GPIO_WP); } -static struct imxmmc_platform_data sdhc_pdata = { +static const struct imxmmc_platform_data sdhc_pdata __initconst = { #ifdef PCM970_SDHC_RW_SWITCH .get_ro = pcm970_sdhc1_get_ro, #endif @@ -441,7 +438,6 @@ static int __init pcm037_camera_alloc_dma(const size_t buf_size) static struct platform_device *devices[] __initdata = { &pcm037_flash, &pcm037_sram_device, - &imx_wdt_device0, &pcm037_mt9t031, &pcm037_mt9v022, }; @@ -538,18 +534,18 @@ static struct platform_device pcm970_sja1000 = { }; #if defined(CONFIG_USB_ULPI) -static struct mxc_usbh_platform_data otg_pdata = { +static struct mxc_usbh_platform_data otg_pdata __initdata = { .portsc = MXC_EHCI_MODE_ULPI, .flags = MXC_EHCI_INTERFACE_DIFF_UNI, }; -static struct mxc_usbh_platform_data usbh2_pdata = { +static struct mxc_usbh_platform_data usbh2_pdata __initdata = { .portsc = MXC_EHCI_MODE_ULPI, .flags = MXC_EHCI_INTERFACE_DIFF_UNI, }; #endif -static struct fsl_usb2_platform_data otg_device_pdata = { +static const struct fsl_usb2_platform_data otg_device_pdata __initconst = { .operating_mode = FSL_USB2_DR_DEVICE, .phy_mode = FSL_USB2_PHY_ULPI, }; @@ -607,12 +603,13 @@ static void __init mxc_board_init(void) platform_add_devices(devices, ARRAY_SIZE(devices)); + imx31_add_imx2_wdt(NULL); imx31_add_imx_uart0(&uart_pdata); /* XXX: should't this have .flags = 0 (i.e. no RTSCTS) on PCM037_EET? */ imx31_add_imx_uart1(&uart_pdata); imx31_add_imx_uart2(&uart_pdata); - mxc_register_device(&mxc_w1_master_device, NULL); + imx31_add_mxc_w1(NULL); /* LAN9217 IRQ pin */ ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1), "lan9217-irq"); @@ -632,7 +629,7 @@ static void __init mxc_board_init(void) imx31_add_imx_i2c2(&pcm037_i2c2_data); imx31_add_mxc_nand(&pcm037_nand_board_info); - mxc_register_device(&mxcsdhc_device0, &sdhc_pdata); + imx31_add_mxc_mmc(0, &sdhc_pdata); mxc_register_device(&mx3_ipu, &mx3_ipu_data); mxc_register_device(&mx3_fb, &mx3fb_pdata); @@ -654,16 +651,16 @@ static void __init mxc_board_init(void) otg_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops, ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT); - mxc_register_device(&mxc_otg_host, &otg_pdata); + imx31_add_mxc_ehci_otg(&otg_pdata); } usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops, ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT); - mxc_register_device(&mxc_usbh2, &usbh2_pdata); + imx31_add_mxc_ehci_hs(2, &usbh2_pdata); #endif if (!otg_mode_host) - mxc_register_device(&mxc_otg_udc_device, &otg_device_pdata); + imx31_add_fsl_usb2_udc(&otg_device_pdata); } diff --git a/arch/arm/mach-mx3/mach-pcm043.c b/arch/arm/mach-mx3/mach-pcm043.c index 4e1de87995d..bcf83fc7e70 100644 --- a/arch/arm/mach-mx3/mach-pcm043.c +++ b/arch/arm/mach-mx3/mach-pcm043.c @@ -27,7 +27,6 @@ #include <linux/i2c/at24.h> #include <linux/usb/otg.h> #include <linux/usb/ulpi.h> -#include <linux/fsl_devices.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -39,7 +38,6 @@ #include <mach/iomux-mx35.h> #include <mach/ipu.h> #include <mach/mx3fb.h> -#include <mach/mxc_ehci.h> #include <mach/ulpi.h> #include <mach/audmux.h> @@ -140,10 +138,9 @@ static struct i2c_board_info pcm043_i2c_devices[] = { static struct platform_device *devices[] __initdata = { &pcm043_flash, - &imx_wdt_device0, }; -static struct pad_desc pcm043_pads[] = { +static iomux_v3_cfg_t pcm043_pads[] = { /* UART1 */ MX35_PAD_CTS1__UART1_CTS, MX35_PAD_RTS1__UART1_RTS, @@ -230,8 +227,8 @@ static struct pad_desc pcm043_pads[] = { static void pcm043_ac97_warm_reset(struct snd_ac97 *ac97) { - struct pad_desc txfs_gpio = MX35_PAD_STXFS4__GPIO2_31; - struct pad_desc txfs = MX35_PAD_STXFS4__AUDMUX_AUD4_TXFS; + iomux_v3_cfg_t txfs_gpio = MX35_PAD_STXFS4__GPIO2_31; + iomux_v3_cfg_t txfs = MX35_PAD_STXFS4__AUDMUX_AUD4_TXFS; int ret; ret = gpio_request(AC97_GPIO_TXFS, "SSI"); @@ -240,7 +237,7 @@ static void pcm043_ac97_warm_reset(struct snd_ac97 *ac97) return; } - mxc_iomux_v3_setup_pad(&txfs_gpio); + mxc_iomux_v3_setup_pad(txfs_gpio); /* warm reset */ gpio_direction_output(AC97_GPIO_TXFS, 1); @@ -248,16 +245,16 @@ static void pcm043_ac97_warm_reset(struct snd_ac97 *ac97) gpio_set_value(AC97_GPIO_TXFS, 0); gpio_free(AC97_GPIO_TXFS); - mxc_iomux_v3_setup_pad(&txfs); + mxc_iomux_v3_setup_pad(txfs); } static void pcm043_ac97_cold_reset(struct snd_ac97 *ac97) { - struct pad_desc txfs_gpio = MX35_PAD_STXFS4__GPIO2_31; - struct pad_desc txfs = MX35_PAD_STXFS4__AUDMUX_AUD4_TXFS; - struct pad_desc txd_gpio = MX35_PAD_STXD4__GPIO2_28; - struct pad_desc txd = MX35_PAD_STXD4__AUDMUX_AUD4_TXD; - struct pad_desc reset_gpio = MX35_PAD_SD2_CMD__GPIO2_0; + iomux_v3_cfg_t txfs_gpio = MX35_PAD_STXFS4__GPIO2_31; + iomux_v3_cfg_t txfs = MX35_PAD_STXFS4__AUDMUX_AUD4_TXFS; + iomux_v3_cfg_t txd_gpio = MX35_PAD_STXD4__GPIO2_28; + iomux_v3_cfg_t txd = MX35_PAD_STXD4__AUDMUX_AUD4_TXD; + iomux_v3_cfg_t reset_gpio = MX35_PAD_SD2_CMD__GPIO2_0; int ret; ret = gpio_request(AC97_GPIO_TXFS, "SSI"); @@ -272,9 +269,9 @@ static void pcm043_ac97_cold_reset(struct snd_ac97 *ac97) if (ret) goto err3; - mxc_iomux_v3_setup_pad(&txfs_gpio); - mxc_iomux_v3_setup_pad(&txd_gpio); - mxc_iomux_v3_setup_pad(&reset_gpio); + mxc_iomux_v3_setup_pad(txfs_gpio); + mxc_iomux_v3_setup_pad(txd_gpio); + mxc_iomux_v3_setup_pad(reset_gpio); gpio_direction_output(AC97_GPIO_TXFS, 0); gpio_direction_output(AC97_GPIO_TXD, 0); @@ -284,8 +281,8 @@ static void pcm043_ac97_cold_reset(struct snd_ac97 *ac97) udelay(10); gpio_direction_output(AC97_GPIO_RESET, 1); - mxc_iomux_v3_setup_pad(&txd); - mxc_iomux_v3_setup_pad(&txfs); + mxc_iomux_v3_setup_pad(txd); + mxc_iomux_v3_setup_pad(txfs); gpio_free(AC97_GPIO_RESET); err3: @@ -311,19 +308,19 @@ pcm037_nand_board_info __initconst = { }; #if defined(CONFIG_USB_ULPI) -static struct mxc_usbh_platform_data otg_pdata = { +static struct mxc_usbh_platform_data otg_pdata __initdata = { .portsc = MXC_EHCI_MODE_UTMI, .flags = MXC_EHCI_INTERFACE_DIFF_UNI, }; -static struct mxc_usbh_platform_data usbh1_pdata = { +static const struct mxc_usbh_platform_data usbh1_pdata __initconst = { .portsc = MXC_EHCI_MODE_SERIAL, .flags = MXC_EHCI_INTERFACE_SINGLE_UNI | MXC_EHCI_INTERNAL_PHY | MXC_EHCI_IPPUE_DOWN, }; #endif -static struct fsl_usb2_platform_data otg_device_pdata = { +static const struct fsl_usb2_platform_data otg_device_pdata __initconst = { .operating_mode = FSL_USB2_DR_DEVICE, .phy_mode = FSL_USB2_PHY_UTMI, }; @@ -364,6 +361,7 @@ static void __init mxc_board_init(void) imx35_add_fec(NULL); platform_add_devices(devices, ARRAY_SIZE(devices)); + imx35_add_imx2_wdt(NULL); imx35_add_imx_uart0(&uart_pdata); imx35_add_mxc_nand(&pcm037_nand_board_info); @@ -386,16 +384,16 @@ static void __init mxc_board_init(void) otg_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops, ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT); - mxc_register_device(&mxc_otg_host, &otg_pdata); + imx35_add_mxc_ehci_otg(&otg_pdata); } - mxc_register_device(&mxc_usbh1, &usbh1_pdata); + imx35_add_mxc_ehci_hs(&usbh1_pdata); #endif if (!otg_mode_host) - mxc_register_device(&mxc_otg_udc_device, &otg_device_pdata); + imx35_add_fsl_usb2_udc(&otg_device_pdata); imx35_add_flexcan1(NULL); - imx35_add_esdhc(0, NULL); + imx35_add_sdhci_esdhc_imx(0, NULL); } static void __init pcm043_timer_init(void) diff --git a/arch/arm/mach-mx3/mm.c b/arch/arm/mach-mx3/mm.c index b4ffc531a82..47118f76024 100644 --- a/arch/arm/mach-mx3/mm.c +++ b/arch/arm/mach-mx3/mm.c @@ -36,40 +36,16 @@ * @ingroup Memory */ -/*! - * This table defines static virtual address mappings for I/O regions. - * These are the mappings common across all MX3 boards. - */ -static struct map_desc mxc_io_desc[] __initdata = { - { - .virtual = X_MEMC_BASE_ADDR_VIRT, - .pfn = __phys_to_pfn(X_MEMC_BASE_ADDR), - .length = X_MEMC_SIZE, - .type = MT_DEVICE - }, { - .virtual = AVIC_BASE_ADDR_VIRT, - .pfn = __phys_to_pfn(AVIC_BASE_ADDR), - .length = AVIC_SIZE, - .type = MT_DEVICE_NONSHARED - }, { - .virtual = AIPS1_BASE_ADDR_VIRT, - .pfn = __phys_to_pfn(AIPS1_BASE_ADDR), - .length = AIPS1_SIZE, - .type = MT_DEVICE_NONSHARED - }, { - .virtual = AIPS2_BASE_ADDR_VIRT, - .pfn = __phys_to_pfn(AIPS2_BASE_ADDR), - .length = AIPS2_SIZE, - .type = MT_DEVICE_NONSHARED - }, { - .virtual = SPBA0_BASE_ADDR_VIRT, - .pfn = __phys_to_pfn(SPBA0_BASE_ADDR), - .length = SPBA0_SIZE, - .type = MT_DEVICE_NONSHARED - }, +#ifdef CONFIG_SOC_IMX31 +static struct map_desc mx31_io_desc[] __initdata = { + imx_map_entry(MX31, X_MEMC, MT_DEVICE), + imx_map_entry(MX31, AVIC, MT_DEVICE_NONSHARED), + imx_map_entry(MX31, AIPS1, MT_DEVICE_NONSHARED), + imx_map_entry(MX31, AIPS2, MT_DEVICE_NONSHARED), + imx_map_entry(MX31, SPBA0, MT_DEVICE_NONSHARED), }; -/*! +/* * This function initializes the memory map. It is called during the * system startup to create static physical to virtual memory mappings * for the IO modules. @@ -77,34 +53,44 @@ static struct map_desc mxc_io_desc[] __initdata = { void __init mx31_map_io(void) { mxc_set_cpu_type(MXC_CPU_MX31); - mxc_arch_reset_init(IO_ADDRESS(WDOG_BASE_ADDR)); + mxc_arch_reset_init(MX31_IO_ADDRESS(MX31_WDOG_BASE_ADDR)); - iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc)); + iotable_init(mx31_io_desc, ARRAY_SIZE(mx31_io_desc)); } -#ifdef CONFIG_ARCH_MX35 -void __init mx35_map_io(void) +int imx31_register_gpios(void); +void __init mx31_init_irq(void) { - mxc_set_cpu_type(MXC_CPU_MX35); - mxc_iomux_v3_init(IO_ADDRESS(IOMUXC_BASE_ADDR)); - mxc_arch_reset_init(IO_ADDRESS(WDOG_BASE_ADDR)); - - iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc)); + mxc_init_irq(MX31_IO_ADDRESS(MX31_AVIC_BASE_ADDR)); + imx31_register_gpios(); } -#endif - -int imx3x_register_gpios(void); +#endif /* ifdef CONFIG_SOC_IMX31 */ + +#ifdef CONFIG_SOC_IMX35 +static struct map_desc mx35_io_desc[] __initdata = { + imx_map_entry(MX35, X_MEMC, MT_DEVICE), + imx_map_entry(MX35, AVIC, MT_DEVICE_NONSHARED), + imx_map_entry(MX35, AIPS1, MT_DEVICE_NONSHARED), + imx_map_entry(MX35, AIPS2, MT_DEVICE_NONSHARED), + imx_map_entry(MX35, SPBA0, MT_DEVICE_NONSHARED), +}; -void __init mx31_init_irq(void) +void __init mx35_map_io(void) { - mxc_init_irq(IO_ADDRESS(AVIC_BASE_ADDR)); - imx3x_register_gpios(); + mxc_set_cpu_type(MXC_CPU_MX35); + mxc_iomux_v3_init(MX35_IO_ADDRESS(MX35_IOMUXC_BASE_ADDR)); + mxc_arch_reset_init(MX35_IO_ADDRESS(MX35_WDOG_BASE_ADDR)); + + iotable_init(mx35_io_desc, ARRAY_SIZE(mx35_io_desc)); } +int imx35_register_gpios(void); void __init mx35_init_irq(void) { - mx31_init_irq(); + mxc_init_irq(MX35_IO_ADDRESS(MX35_AVIC_BASE_ADDR)); + imx35_register_gpios(); } +#endif /* ifdef CONFIG_SOC_IMX35 */ #ifdef CONFIG_CACHE_L2X0 static int mxc_init_l2x0(void) @@ -129,7 +115,7 @@ static int mxc_init_l2x0(void) pr_err("L2 cache: Cannot fix timing. Trying to continue without\n"); } - l2x0_base = ioremap(L2CC_BASE_ADDR, 4096); + l2x0_base = ioremap(MX3x_L2CC_BASE_ADDR, 4096); if (IS_ERR(l2x0_base)) { printk(KERN_ERR "remapping L2 cache area failed with %ld\n", PTR_ERR(l2x0_base)); diff --git a/arch/arm/mach-mx3/mx31lilly-db.c b/arch/arm/mach-mx3/mx31lilly-db.c index 827fd3c8020..8f1a38ebf5c 100644 --- a/arch/arm/mach-mx3/mx31lilly-db.c +++ b/arch/arm/mach-mx3/mx31lilly-db.c @@ -34,7 +34,6 @@ #include <mach/common.h> #include <mach/iomux-mx3.h> #include <mach/board-mx31lilly.h> -#include <mach/mmc.h> #include <mach/mx3fb.h> #include <mach/ipu.h> @@ -158,7 +157,7 @@ static void mxc_mmc1_exit(struct device *dev, void *data) free_irq(IOMUX_TO_IRQ(MX31_PIN_GPIO1_1), data); } -static struct imxmmc_platform_data mmc_pdata = { +static const struct imxmmc_platform_data mmc_pdata __initconst = { .get_ro = mxc_mmc1_get_ro, .init = mxc_mmc1_init, .exit = mxc_mmc1_exit, @@ -216,7 +215,7 @@ void __init mx31lilly_db_init(void) imx31_add_imx_uart0(&uart_pdata); imx31_add_imx_uart1(&uart_pdata); imx31_add_imx_uart2(&uart_pdata); - mxc_register_device(&mxcsdhc_device0, &mmc_pdata); + imx31_add_mxc_mmc(0, &mmc_pdata); mx31lilly_init_fb(); } diff --git a/arch/arm/mach-mx3/mx31lite-db.c b/arch/arm/mach-mx3/mx31lite-db.c index 7b0e74e275b..3124ea837ac 100644 --- a/arch/arm/mach-mx3/mx31lite-db.c +++ b/arch/arm/mach-mx3/mx31lite-db.c @@ -35,7 +35,6 @@ #include <mach/common.h> #include <mach/iomux-mx3.h> #include <mach/board-mx31lite.h> -#include <mach/mmc.h> #include "devices-imx31.h" #include "devices.h" @@ -142,7 +141,7 @@ static void mxc_mmc1_exit(struct device *dev, void *data) free_irq(IOMUX_TO_IRQ(MX31_PIN_DCD_DCE1), data); } -static struct imxmmc_platform_data mmc_pdata = { +static const struct imxmmc_platform_data mmc_pdata __initconst = { .get_ro = mxc_mmc1_get_ro, .init = mxc_mmc1_init, .exit = mxc_mmc1_exit, @@ -197,10 +196,9 @@ void __init mx31lite_db_init(void) ARRAY_SIZE(litekit_db_board_pins), "development board pins"); imx31_add_imx_uart0(&uart_pdata); - mxc_register_device(&mxcsdhc_device0, &mmc_pdata); + imx31_add_mxc_mmc(0, &mmc_pdata); imx31_add_spi_imx0(&spi0_pdata); platform_device_register(&litekit_led_device); - mxc_register_device(&imx_wdt_device0, NULL); + imx31_add_imx2_wdt(NULL); mxc_register_device(&imx_rtc_device0, NULL); } - diff --git a/arch/arm/mach-mx3/mx31moboard-devboard.c b/arch/arm/mach-mx3/mx31moboard-devboard.c index fc395a7a859..94a0b9e4b7f 100644 --- a/arch/arm/mach-mx3/mx31moboard-devboard.c +++ b/arch/arm/mach-mx3/mx31moboard-devboard.c @@ -18,15 +18,12 @@ #include <linux/platform_device.h> #include <linux/slab.h> #include <linux/types.h> -#include <linux/fsl_devices.h> #include <linux/usb/otg.h> #include <mach/common.h> #include <mach/iomux-mx3.h> #include <mach/hardware.h> -#include <mach/mmc.h> -#include <mach/mxc_ehci.h> #include <mach/ulpi.h> #include "devices-imx31.h" @@ -103,7 +100,7 @@ static void devboard_sdhc2_exit(struct device *dev, void *data) gpio_free(SDHC2_CD); } -static struct imxmmc_platform_data sdhc2_pdata = { +static const struct imxmmc_platform_data sdhc2_pdata __initconst = { .get_ro = devboard_sdhc2_get_ro, .init = devboard_sdhc2_init, .exit = devboard_sdhc2_exit, @@ -187,7 +184,7 @@ static int devboard_isp1105_set_vbus(struct otg_transceiver *otg, bool on) return 0; } -static struct mxc_usbh_platform_data usbh1_pdata = { +static struct mxc_usbh_platform_data usbh1_pdata __initdata = { .init = devboard_usbh1_hw_init, .portsc = MXC_EHCI_MODE_UTMI | MXC_EHCI_SERIAL, .flags = MXC_EHCI_POWER_PINS_ENABLED | MXC_EHCI_INTERFACE_SINGLE_UNI, @@ -196,6 +193,7 @@ static struct mxc_usbh_platform_data usbh1_pdata = { static int __init devboard_usbh1_init(void) { struct otg_transceiver *otg; + struct platform_device *pdev; otg = kzalloc(sizeof(*otg), GFP_KERNEL); if (!otg) @@ -207,11 +205,15 @@ static int __init devboard_usbh1_init(void) usbh1_pdata.otg = otg; - return mxc_register_device(&mxc_usbh1, &usbh1_pdata); + pdev = imx31_add_mxc_ehci_hs(1, &usbh1_pdata); + if (IS_ERR(pdev)) + return PTR_ERR(pdev); + + return 0; } -static struct fsl_usb2_platform_data usb_pdata = { +static const struct fsl_usb2_platform_data usb_pdata __initconst = { .operating_mode = FSL_USB2_DR_DEVICE, .phy_mode = FSL_USB2_PHY_ULPI, }; @@ -228,11 +230,11 @@ void __init mx31moboard_devboard_init(void) imx31_add_imx_uart1(&uart_pdata); - mxc_register_device(&mxcsdhc_device1, &sdhc2_pdata); + imx31_add_mxc_mmc(1, &sdhc2_pdata); devboard_init_sel_gpios(); - mxc_register_device(&mxc_otg_udc_device, &usb_pdata); + imx31_add_fsl_usb2_udc(&usb_pdata); devboard_usbh1_init(); } diff --git a/arch/arm/mach-mx3/mx31moboard-marxbot.c b/arch/arm/mach-mx3/mx31moboard-marxbot.c index 18069cb7d06..f449a97ae1a 100644 --- a/arch/arm/mach-mx3/mx31moboard-marxbot.c +++ b/arch/arm/mach-mx3/mx31moboard-marxbot.c @@ -21,7 +21,6 @@ #include <linux/slab.h> #include <linux/platform_device.h> #include <linux/types.h> -#include <linux/fsl_devices.h> #include <linux/usb/otg.h> @@ -29,12 +28,11 @@ #include <mach/hardware.h> #include <mach/imx-uart.h> #include <mach/iomux-mx3.h> -#include <mach/mmc.h> -#include <mach/mxc_ehci.h> #include <mach/ulpi.h> #include <media/soc_camera.h> +#include "devices-imx31.h" #include "devices.h" static unsigned int marxbot_pins[] = { @@ -116,7 +114,7 @@ static void marxbot_sdhc2_exit(struct device *dev, void *data) gpio_free(SDHC2_CD); } -static struct imxmmc_platform_data sdhc2_pdata = { +static const struct imxmmc_platform_data sdhc2_pdata __initconst = { .get_ro = marxbot_sdhc2_get_ro, .init = marxbot_sdhc2_init, .exit = marxbot_sdhc2_exit, @@ -302,7 +300,7 @@ static int marxbot_isp1105_set_vbus(struct otg_transceiver *otg, bool on) return 0; } -static struct mxc_usbh_platform_data usbh1_pdata = { +static struct mxc_usbh_platform_data usbh1_pdata __initdata = { .init = marxbot_usbh1_hw_init, .portsc = MXC_EHCI_MODE_UTMI | MXC_EHCI_SERIAL, .flags = MXC_EHCI_POWER_PINS_ENABLED | MXC_EHCI_INTERFACE_SINGLE_UNI, @@ -311,6 +309,7 @@ static struct mxc_usbh_platform_data usbh1_pdata = { static int __init marxbot_usbh1_init(void) { struct otg_transceiver *otg; + struct platform_device *pdev; otg = kzalloc(sizeof(*otg), GFP_KERNEL); if (!otg) @@ -322,10 +321,14 @@ static int __init marxbot_usbh1_init(void) usbh1_pdata.otg = otg; - return mxc_register_device(&mxc_usbh1, &usbh1_pdata); + pdev = imx31_add_mxc_ehci_hs(1, &usbh1_pdata); + if (IS_ERR(pdev)) + return PTR_ERR(pdev); + + return 0; } -static struct fsl_usb2_platform_data usb_pdata = { +static const struct fsl_usb2_platform_data usb_pdata __initconst = { .operating_mode = FSL_USB2_DR_DEVICE, .phy_mode = FSL_USB2_PHY_ULPI, }; @@ -344,7 +347,7 @@ void __init mx31moboard_marxbot_init(void) dspics_resets_init(); - mxc_register_device(&mxcsdhc_device1, &sdhc2_pdata); + imx31_add_mxc_mmc(1, &sdhc2_pdata); spi_register_board_info(marxbot_spi_board_info, ARRAY_SIZE(marxbot_spi_board_info)); @@ -357,7 +360,7 @@ void __init mx31moboard_marxbot_init(void) gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_LCS0)); gpio_export(IOMUX_TO_GPIO(MX31_PIN_LCS0), false); - mxc_register_device(&mxc_otg_udc_device, &usb_pdata); + imx31_add_fsl_usb2_udc(&usb_pdata); marxbot_usbh1_init(); } diff --git a/arch/arm/mach-mx3/mx31moboard-smartbot.c b/arch/arm/mach-mx3/mx31moboard-smartbot.c index 04760a53005..bbec3c82264 100644 --- a/arch/arm/mach-mx3/mx31moboard-smartbot.c +++ b/arch/arm/mach-mx3/mx31moboard-smartbot.c @@ -19,7 +19,6 @@ #include <linux/i2c.h> #include <linux/platform_device.h> #include <linux/types.h> -#include <linux/fsl_devices.h> #include <linux/usb/otg.h> #include <linux/usb/ulpi.h> @@ -28,7 +27,6 @@ #include <mach/hardware.h> #include <mach/iomux-mx3.h> #include <mach/board-mx31moboard.h> -#include <mach/mxc_ehci.h> #include <mach/ulpi.h> #include <media/soc_camera.h> @@ -118,24 +116,30 @@ static int __init smartbot_cam_init(void) return 0; } -static struct fsl_usb2_platform_data usb_pdata = { +static const struct fsl_usb2_platform_data usb_pdata __initconst = { .operating_mode = FSL_USB2_DR_DEVICE, .phy_mode = FSL_USB2_PHY_ULPI, }; #if defined(CONFIG_USB_ULPI) -static struct mxc_usbh_platform_data otg_host_pdata = { +static struct mxc_usbh_platform_data otg_host_pdata __initdata = { .portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT, .flags = MXC_EHCI_POWER_PINS_ENABLED, }; static int __init smartbot_otg_host_init(void) { + struct platform_device *pdev; + otg_host_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops, ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT); - return mxc_register_device(&mxc_otg_host, &otg_host_pdata); + pdev = imx31_add_mxc_ehci_otg(&otg_host_pdata); + if (IS_ERR(pdev)) + return PTR_ERR(pdev); + + return 0; } #else static inline int smartbot_otg_host_init(void) { return 0; } @@ -182,7 +186,7 @@ void __init mx31moboard_smartbot_init(int board) switch (board) { case MX31SMARTBOT: - mxc_register_device(&mxc_otg_udc_device, &usb_pdata); + imx31_add_fsl_usb2_udc(&usb_pdata); break; case MX31EYEBOT: smartbot_otg_host_init(); diff --git a/arch/arm/mach-mx5/Kconfig b/arch/arm/mach-mx5/Kconfig index 3ec910a7a18..55254b6e946 100644 --- a/arch/arm/mach-mx5/Kconfig +++ b/arch/arm/mach-mx5/Kconfig @@ -1,20 +1,47 @@ if ARCH_MX5 +# ARCH_MX51 and ARCH_MX50 are left for compatibility + +config ARCH_MX50 + bool config ARCH_MX51 bool - default y + +config ARCH_MX53 + bool + +config SOC_IMX50 + bool + select MXC_TZIC + select ARCH_MXC_IOMUX_V3 + select ARCH_MXC_AUDMUX_V2 + select ARCH_HAS_CPUFREQ + select ARCH_MX50 + +config SOC_IMX51 + bool select MXC_TZIC select ARCH_MXC_IOMUX_V3 select ARCH_MXC_AUDMUX_V2 select ARCH_HAS_CPUFREQ + select ARCH_MX51 + +config SOC_IMX53 + bool + select MXC_TZIC + select ARCH_MXC_IOMUX_V3 + select ARCH_MX53 comment "MX5 platforms:" config MACH_MX51_BABBAGE bool "Support MX51 BABBAGE platforms" + select SOC_IMX51 + select IMX_HAVE_PLATFORM_IMX2_WDT select IMX_HAVE_PLATFORM_IMX_I2C select IMX_HAVE_PLATFORM_IMX_UART - select IMX_HAVE_PLATFORM_ESDHC + select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX + select IMX_HAVE_PLATFORM_SPI_IMX help Include support for MX51 Babbage platform, also known as MX51EVK in u-boot. This includes specific configurations for the board and its @@ -22,7 +49,9 @@ config MACH_MX51_BABBAGE config MACH_MX51_3DS bool "Support MX51PDK (3DS)" + select SOC_IMX51 select IMX_HAVE_PLATFORM_IMX_UART + select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX select IMX_HAVE_PLATFORM_SPI_IMX select MXC_DEBUG_BOARD help @@ -31,6 +60,7 @@ config MACH_MX51_3DS config MACH_EUKREA_CPUIMX51 bool "Support Eukrea CPUIMX51 module" + select SOC_IMX51 select IMX_HAVE_PLATFORM_IMX_I2C select IMX_HAVE_PLATFORM_IMX_UART select IMX_HAVE_PLATFORM_MXC_NAND @@ -47,7 +77,7 @@ choice config MACH_EUKREA_MBIMX51_BASEBOARD prompt "Eukrea MBIMX51 development board" bool - select IMX_HAVE_PLATFORM_ESDHC + select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX help This adds board specific devices that can be found on Eukrea's MBIMX51 evaluation board. @@ -56,6 +86,7 @@ endchoice config MACH_EUKREA_CPUIMX51SD bool "Support Eukrea CPUIMX51SD module" + select SOC_IMX51 select IMX_HAVE_PLATFORM_IMX_I2C select IMX_HAVE_PLATFORM_SPI_IMX select IMX_HAVE_PLATFORM_IMX_UART @@ -72,7 +103,7 @@ choice config MACH_EUKREA_MBIMXSD51_BASEBOARD prompt "Eukrea MBIMXSD development board" bool - select IMX_HAVE_PLATFORM_ESDHC + select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX help This adds board specific devices that can be found on Eukrea's MBIMXSD evaluation board. @@ -81,9 +112,33 @@ endchoice config MACH_MX51_EFIKAMX bool "Support MX51 Genesi Efika MX nettop" + select SOC_IMX51 select IMX_HAVE_PLATFORM_IMX_UART + select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX + select IMX_HAVE_PLATFORM_SPI_IMX help Include support for Genesi Efika MX nettop. This includes specific configurations for the board and its peripherals. +config MACH_MX53_EVK + bool "Support MX53 EVK platforms" + select SOC_IMX53 + select IMX_HAVE_PLATFORM_IMX_UART + help + Include support for MX53 EVK platform. This includes specific + configurations for the board and its peripherals. + + +config MACH_MX50_RDP + bool "Support MX50 reference design platform" + depends on BROKEN + select SOC_IMX50 + select IMX_HAVE_PLATFORM_IMX_I2C + select IMX_HAVE_PLATFORM_IMX_UART + select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX + select IMX_HAVE_PLATFORM_SPI_IMX + help + Include support for MX50 reference design platform (RDP) board. This + includes specific configurations for the board and its peripherals. + endif diff --git a/arch/arm/mach-mx5/Makefile b/arch/arm/mach-mx5/Makefile index 462f177eddf..0c398baf11f 100644 --- a/arch/arm/mach-mx5/Makefile +++ b/arch/arm/mach-mx5/Makefile @@ -3,13 +3,16 @@ # # Object file lists. -obj-y := cpu.o mm.o clock-mx51.o devices.o +obj-y := cpu.o mm.o clock-mx51-mx53.o devices.o +obj-$(CONFIG_SOC_IMX50) += mm-mx50.o obj-$(CONFIG_CPU_FREQ_IMX) += cpu_op-mx51.o obj-$(CONFIG_MACH_MX51_BABBAGE) += board-mx51_babbage.o obj-$(CONFIG_MACH_MX51_3DS) += board-mx51_3ds.o +obj-$(CONFIG_MACH_MX53_EVK) += board-mx53_evk.o obj-$(CONFIG_MACH_EUKREA_CPUIMX51) += board-cpuimx51.o obj-$(CONFIG_MACH_EUKREA_MBIMX51_BASEBOARD) += eukrea_mbimx51-baseboard.o obj-$(CONFIG_MACH_EUKREA_CPUIMX51SD) += board-cpuimx51sd.o obj-$(CONFIG_MACH_EUKREA_MBIMXSD51_BASEBOARD) += eukrea_mbimxsd-baseboard.o obj-$(CONFIG_MACH_MX51_EFIKAMX) += board-mx51_efikamx.o +obj-$(CONFIG_MACH_MX50_RDP) += board-mx50_rdp.o diff --git a/arch/arm/mach-mx5/Makefile.boot b/arch/arm/mach-mx5/Makefile.boot index 9939a19d99a..e928be1b675 100644 --- a/arch/arm/mach-mx5/Makefile.boot +++ b/arch/arm/mach-mx5/Makefile.boot @@ -1,3 +1,9 @@ - zreladdr-y := 0x90008000 -params_phys-y := 0x90000100 -initrd_phys-y := 0x90800000 + zreladdr-$(CONFIG_ARCH_MX50) := 0x70008000 +params_phys-$(CONFIG_ARCH_MX50) := 0x70000100 +initrd_phys-$(CONFIG_ARCH_MX50) := 0x70800000 + zreladdr-$(CONFIG_ARCH_MX51) := 0x90008000 +params_phys-$(CONFIG_ARCH_MX51) := 0x90000100 +initrd_phys-$(CONFIG_ARCH_MX51) := 0x90800000 + zreladdr-$(CONFIG_ARCH_MX53) := 0x70008000 +params_phys-$(CONFIG_ARCH_MX53) := 0x70000100 +initrd_phys-$(CONFIG_ARCH_MX53) := 0x70800000 diff --git a/arch/arm/mach-mx5/board-cpuimx51.c b/arch/arm/mach-mx5/board-cpuimx51.c index 6a9792fd0a7..f8652ef25f8 100644 --- a/arch/arm/mach-mx5/board-cpuimx51.c +++ b/arch/arm/mach-mx5/board-cpuimx51.c @@ -40,11 +40,11 @@ #include "devices-imx51.h" #include "devices.h" -#define CPUIMX51_USBH1_STP (0*32 + 27) -#define CPUIMX51_QUARTA_GPIO (2*32 + 28) -#define CPUIMX51_QUARTB_GPIO (2*32 + 25) -#define CPUIMX51_QUARTC_GPIO (2*32 + 26) -#define CPUIMX51_QUARTD_GPIO (2*32 + 27) +#define CPUIMX51_USBH1_STP IMX_GPIO_NR(1, 27) +#define CPUIMX51_QUARTA_GPIO IMX_GPIO_NR(3, 28) +#define CPUIMX51_QUARTB_GPIO IMX_GPIO_NR(3, 25) +#define CPUIMX51_QUARTC_GPIO IMX_GPIO_NR(3, 26) +#define CPUIMX51_QUARTD_GPIO IMX_GPIO_NR(3, 27) #define CPUIMX51_QUARTA_IRQ (MXC_INTERNAL_IRQS + CPUIMX51_QUARTA_GPIO) #define CPUIMX51_QUARTB_IRQ (MXC_INTERNAL_IRQS + CPUIMX51_QUARTB_GPIO) #define CPUIMX51_QUARTC_IRQ (MXC_INTERNAL_IRQS + CPUIMX51_QUARTC_GPIO) @@ -113,7 +113,7 @@ static struct platform_device *devices[] __initdata = { #endif }; -static struct pad_desc eukrea_cpuimx51_pads[] = { +static iomux_v3_cfg_t eukrea_cpuimx51_pads[] = { /* UART1 */ MX51_PAD_UART1_RXD__UART1_RXD, MX51_PAD_UART1_TXD__UART1_TXD, @@ -121,15 +121,15 @@ static struct pad_desc eukrea_cpuimx51_pads[] = { MX51_PAD_UART1_CTS__UART1_CTS, /* I2C2 */ - MX51_PAD_GPIO_1_2__I2C2_SCL, - MX51_PAD_GPIO_1_3__I2C2_SDA, - MX51_PAD_NANDF_D10__GPIO_3_30, + MX51_PAD_GPIO1_2__I2C2_SCL, + MX51_PAD_GPIO1_3__I2C2_SDA, + MX51_PAD_NANDF_D10__GPIO3_30, /* QUART IRQ */ - MX51_PAD_NANDF_D15__GPIO_3_25, - MX51_PAD_NANDF_D14__GPIO_3_26, - MX51_PAD_NANDF_D13__GPIO_3_27, - MX51_PAD_NANDF_D12__GPIO_3_28, + MX51_PAD_NANDF_D15__GPIO3_25, + MX51_PAD_NANDF_D14__GPIO3_26, + MX51_PAD_NANDF_D13__GPIO3_27, + MX51_PAD_NANDF_D12__GPIO3_28, /* USB HOST1 */ MX51_PAD_USBH1_CLK__USBH1_CLK, @@ -178,6 +178,8 @@ static int initialize_otg_port(struct platform_device *pdev) void __iomem *usbother_base; usb_base = ioremap(MX51_OTG_BASE_ADDR, SZ_4K); + if (!usb_base) + return -ENOMEM; usbother_base = usb_base + MX5_USBOTHER_REGS_OFFSET; /* Set the PHY clock to 19.2MHz */ @@ -196,6 +198,8 @@ static int initialize_usbh1_port(struct platform_device *pdev) void __iomem *usbother_base; usb_base = ioremap(MX51_OTG_BASE_ADDR, SZ_4K); + if (!usb_base) + return -ENOMEM; usbother_base = usb_base + MX5_USBOTHER_REGS_OFFSET; /* The clock for the USBH1 ULPI port will come externally from the PHY. */ @@ -292,7 +296,7 @@ static struct sys_timer mxc_timer = { MACHINE_START(EUKREA_CPUIMX51, "Eukrea CPUIMX51 Module") /* Maintainer: Eric Bénard <eric@eukrea.com> */ - .boot_params = PHYS_OFFSET + 0x100, + .boot_params = MX51_PHYS_OFFSET + 0x100, .map_io = mx51_map_io, .init_irq = mx51_init_irq, .init_machine = eukrea_cpuimx51_init, diff --git a/arch/arm/mach-mx5/board-cpuimx51sd.c b/arch/arm/mach-mx5/board-cpuimx51sd.c index 4b3a6119c5f..ad931895d8b 100644 --- a/arch/arm/mach-mx5/board-cpuimx51sd.c +++ b/arch/arm/mach-mx5/board-cpuimx51sd.c @@ -43,19 +43,19 @@ #include "devices-imx51.h" #include "devices.h" -#define USBH1_RST (1*32 + 28) -#define ETH_RST (1*32 + 31) -#define TSC2007_IRQGPIO (2*32 + 12) -#define CAN_IRQGPIO (0*32 + 1) -#define CAN_RST (3*32 + 15) -#define CAN_NCS (3*32 + 24) -#define CAN_RXOBF (0*32 + 4) -#define CAN_RX1BF (0*32 + 6) -#define CAN_TXORTS (0*32 + 7) -#define CAN_TX1RTS (0*32 + 8) -#define CAN_TX2RTS (0*32 + 9) -#define I2C_SCL (3*32 + 16) -#define I2C_SDA (3*32 + 17) +#define USBH1_RST IMX_GPIO_NR(2, 28) +#define ETH_RST IMX_GPIO_NR(2, 31) +#define TSC2007_IRQGPIO IMX_GPIO_NR(3, 12) +#define CAN_IRQGPIO IMX_GPIO_NR(1, 1) +#define CAN_RST IMX_GPIO_NR(4, 15) +#define CAN_NCS IMX_GPIO_NR(4, 24) +#define CAN_RXOBF IMX_GPIO_NR(1, 4) +#define CAN_RX1BF IMX_GPIO_NR(1, 6) +#define CAN_TXORTS IMX_GPIO_NR(1, 7) +#define CAN_TX1RTS IMX_GPIO_NR(1, 8) +#define CAN_TX2RTS IMX_GPIO_NR(1, 9) +#define I2C_SCL IMX_GPIO_NR(4, 16) +#define I2C_SDA IMX_GPIO_NR(4, 17) /* USB_CTRL_1 */ #define MX51_USB_CTRL_1_OFFSET 0x10 @@ -65,10 +65,7 @@ #define MX51_USB_PLL_DIV_19_2_MHZ 0x01 #define MX51_USB_PLL_DIV_24_MHZ 0x02 -#define CPUIMX51SD_GPIO_3_12 IOMUX_PAD(0x57C, 0x194, 3, 0x0, 0, \ - MX51_PAD_CTRL_1 | PAD_CTL_PUS_22K_UP) - -static struct pad_desc eukrea_cpuimx51sd_pads[] = { +static iomux_v3_cfg_t eukrea_cpuimx51sd_pads[] = { /* UART1 */ MX51_PAD_UART1_RXD__UART1_RXD, MX51_PAD_UART1_TXD__UART1_TXD, @@ -88,30 +85,33 @@ static struct pad_desc eukrea_cpuimx51sd_pads[] = { MX51_PAD_USBH1_DATA6__USBH1_DATA6, MX51_PAD_USBH1_DATA7__USBH1_DATA7, MX51_PAD_USBH1_STP__USBH1_STP, - MX51_PAD_EIM_CS3__GPIO_2_28, /* PHY nRESET */ + MX51_PAD_EIM_CS3__GPIO2_28, /* PHY nRESET */ /* FEC */ - MX51_PAD_EIM_DTACK__GPIO_2_31, /* PHY nRESET */ + MX51_PAD_EIM_DTACK__GPIO2_31, /* PHY nRESET */ /* HSI2C */ - MX51_PAD_I2C1_CLK__GPIO_4_16, - MX51_PAD_I2C1_DAT__GPIO_4_17, + MX51_PAD_I2C1_CLK__GPIO4_16, + MX51_PAD_I2C1_DAT__GPIO4_17, /* CAN */ MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI, MX51_PAD_CSPI1_MISO__ECSPI1_MISO, MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK, - MX51_PAD_CSPI1_SS0__GPIO_4_24, /* nCS */ - MX51_PAD_CSI2_PIXCLK__GPIO_4_15, /* nReset */ - MX51_PAD_GPIO_1_1__GPIO_1_1, /* IRQ */ - MX51_PAD_GPIO_1_4__GPIO_1_4, /* Control signals */ - MX51_PAD_GPIO_1_6__GPIO_1_6, - MX51_PAD_GPIO_1_7__GPIO_1_7, - MX51_PAD_GPIO_1_8__GPIO_1_8, - MX51_PAD_GPIO_1_9__GPIO_1_9, + MX51_PAD_CSPI1_SS0__GPIO4_24, /* nCS */ + MX51_PAD_CSI2_PIXCLK__GPIO4_15, /* nReset */ + MX51_PAD_GPIO1_1__GPIO1_1, /* IRQ */ + MX51_PAD_GPIO1_4__GPIO1_4, /* Control signals */ + MX51_PAD_GPIO1_6__GPIO1_6, + MX51_PAD_GPIO1_7__GPIO1_7, + MX51_PAD_GPIO1_8__GPIO1_8, + MX51_PAD_GPIO1_9__GPIO1_9, /* Touchscreen */ - CPUIMX51SD_GPIO_3_12, /* IRQ */ + /* IRQ */ + _MX51_PAD_CSI1_D8__GPIO3_12 | MUX_PAD_CTRL(PAD_CTL_PUS_22K_UP | + PAD_CTL_PKE | PAD_CTL_SRE_FAST | + PAD_CTL_DSE_HIGH | PAD_CTL_PUE | PAD_CTL_HYS), }; static const struct imxuart_platform_data uart_pdata __initconst = { @@ -157,6 +157,8 @@ static int initialize_otg_port(struct platform_device *pdev) void __iomem *usbother_base; usb_base = ioremap(MX51_OTG_BASE_ADDR, SZ_4K); + if (!usb_base) + return -ENOMEM; usbother_base = usb_base + MX5_USBOTHER_REGS_OFFSET; /* Set the PHY clock to 19.2MHz */ @@ -175,6 +177,8 @@ static int initialize_usbh1_port(struct platform_device *pdev) void __iomem *usbother_base; usb_base = ioremap(MX51_OTG_BASE_ADDR, SZ_4K); + if (!usb_base) + return -ENOMEM; usbother_base = usb_base + MX5_USBOTHER_REGS_OFFSET; /* The clock for the USBH1 ULPI port will come from the PHY. */ @@ -243,7 +247,7 @@ static struct spi_board_info cpuimx51sd_spi_device[] = { .mode = SPI_MODE_0, .chip_select = 0, .platform_data = &mcp251x_info, - .irq = gpio_to_irq(0 * 32 + 1) + .irq = gpio_to_irq(CAN_IRQGPIO) }, }; @@ -323,7 +327,7 @@ static struct sys_timer mxc_timer = { MACHINE_START(EUKREA_CPUIMX51SD, "Eukrea CPUIMX51SD") /* Maintainer: Eric Bénard <eric@eukrea.com> */ - .boot_params = PHYS_OFFSET + 0x100, + .boot_params = MX51_PHYS_OFFSET + 0x100, .map_io = mx51_map_io, .init_irq = mx51_init_irq, .init_machine = eukrea_cpuimx51sd_init, diff --git a/arch/arm/mach-mx5/board-mx50_rdp.c b/arch/arm/mach-mx5/board-mx50_rdp.c new file mode 100644 index 00000000000..fd32e4c450e --- /dev/null +++ b/arch/arm/mach-mx5/board-mx50_rdp.c @@ -0,0 +1,197 @@ +/* + * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved. + */ + +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + */ + +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/gpio.h> +#include <linux/delay.h> +#include <linux/io.h> +#include <linux/fsl_devices.h> + +#include <mach/common.h> +#include <mach/hardware.h> +#include <mach/iomux-mx50.h> + +#include <asm/irq.h> +#include <asm/setup.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/time.h> + +#include "devices-mx50.h" + +static iomux_v3_cfg_t mx50_rdp_pads[] __initdata = { + /* SD1 */ + MX50_PAD_ECSPI2_SS0__GPIO_4_19, + MX50_PAD_EIM_CRE__GPIO_1_27, + MX50_PAD_SD1_CMD__SD1_CMD, + + MX50_PAD_SD1_CLK__SD1_CLK, + MX50_PAD_SD1_D0__SD1_D0, + MX50_PAD_SD1_D1__SD1_D1, + MX50_PAD_SD1_D2__SD1_D2, + MX50_PAD_SD1_D3__SD1_D3, + + /* SD2 */ + MX50_PAD_SD2_CD__GPIO_5_17, + MX50_PAD_SD2_WP__GPIO_5_16, + MX50_PAD_SD2_CMD__SD2_CMD, + MX50_PAD_SD2_CLK__SD2_CLK, + MX50_PAD_SD2_D0__SD2_D0, + MX50_PAD_SD2_D1__SD2_D1, + MX50_PAD_SD2_D2__SD2_D2, + MX50_PAD_SD2_D3__SD2_D3, + MX50_PAD_SD2_D4__SD2_D4, + MX50_PAD_SD2_D5__SD2_D5, + MX50_PAD_SD2_D6__SD2_D6, + MX50_PAD_SD2_D7__SD2_D7, + + /* SD3 */ + MX50_PAD_SD3_CMD__SD3_CMD, + MX50_PAD_SD3_CLK__SD3_CLK, + MX50_PAD_SD3_D0__SD3_D0, + MX50_PAD_SD3_D1__SD3_D1, + MX50_PAD_SD3_D2__SD3_D2, + MX50_PAD_SD3_D3__SD3_D3, + MX50_PAD_SD3_D4__SD3_D4, + MX50_PAD_SD3_D5__SD3_D5, + MX50_PAD_SD3_D6__SD3_D6, + MX50_PAD_SD3_D7__SD3_D7, + + /* PWR_INT */ + MX50_PAD_ECSPI2_MISO__GPIO_4_18, + + /* UART pad setting */ + MX50_PAD_UART1_TXD__UART1_TXD, + MX50_PAD_UART1_RXD__UART1_RXD, + MX50_PAD_UART1_RTS__UART1_RTS, + MX50_PAD_UART2_TXD__UART2_TXD, + MX50_PAD_UART2_RXD__UART2_RXD, + MX50_PAD_UART2_CTS__UART2_CTS, + MX50_PAD_UART2_RTS__UART2_RTS, + + MX50_PAD_I2C1_SCL__I2C1_SCL, + MX50_PAD_I2C1_SDA__I2C1_SDA, + MX50_PAD_I2C2_SCL__I2C2_SCL, + MX50_PAD_I2C2_SDA__I2C2_SDA, + + MX50_PAD_EPITO__USBH1_PWR, + /* Need to comment below line if + * one needs to debug owire. + */ + MX50_PAD_OWIRE__USBH1_OC, + /* using gpio to control otg pwr */ + MX50_PAD_PWM2__GPIO_6_25, + MX50_PAD_I2C3_SCL__USBOTG_OC, + + MX50_PAD_SSI_RXC__FEC_MDIO, + MX50_PAD_SSI_RXC__FEC_MDIO, + MX50_PAD_DISP_D0__FEC_TXCLK, + MX50_PAD_DISP_D1__FEC_RX_ER, + MX50_PAD_DISP_D2__FEC_RX_DV, + MX50_PAD_DISP_D3__FEC_RXD1, + MX50_PAD_DISP_D4__FEC_RXD0, + MX50_PAD_DISP_D5__FEC_TX_EN, + MX50_PAD_DISP_D6__FEC_TXD1, + MX50_PAD_DISP_D7__FEC_TXD0, + MX50_PAD_SSI_RXFS__FEC_MDC, + MX50_PAD_I2C3_SDA__GPIO_6_23, + MX50_PAD_ECSPI1_SCLK__GPIO_4_12, + + MX50_PAD_CSPI_SS0__CSPI_SS0, + MX50_PAD_ECSPI1_MOSI__CSPI_SS1, + MX50_PAD_CSPI_MOSI__CSPI_MOSI, + MX50_PAD_CSPI_MISO__CSPI_MISO, + + /* SGTL500_OSC_EN */ + MX50_PAD_UART1_CTS__GPIO_6_8, + + /* SGTL_AMP_SHDN */ + MX50_PAD_UART3_RXD__GPIO_6_15, + + /* Keypad */ + MX50_PAD_KEY_COL0__KEY_COL0, + MX50_PAD_KEY_ROW0__KEY_ROW0, + MX50_PAD_KEY_COL1__KEY_COL1, + MX50_PAD_KEY_ROW1__KEY_ROW1, + MX50_PAD_KEY_COL2__KEY_COL2, + MX50_PAD_KEY_ROW2__KEY_ROW2, + MX50_PAD_KEY_COL3__KEY_COL3, + MX50_PAD_KEY_ROW3__KEY_ROW3, + MX50_PAD_EIM_DA0__KEY_COL4, + MX50_PAD_EIM_DA1__KEY_ROW4, + MX50_PAD_EIM_DA2__KEY_COL5, + MX50_PAD_EIM_DA3__KEY_ROW5, + MX50_PAD_EIM_DA4__KEY_COL6, + MX50_PAD_EIM_DA5__KEY_ROW6, + MX50_PAD_EIM_DA6__KEY_COL7, + MX50_PAD_EIM_DA7__KEY_ROW7, + /*EIM pads */ + MX50_PAD_EIM_DA8__GPIO_1_8, + MX50_PAD_EIM_DA9__GPIO_1_9, + MX50_PAD_EIM_DA10__GPIO_1_10, + MX50_PAD_EIM_DA11__GPIO_1_11, + MX50_PAD_EIM_DA12__GPIO_1_12, + MX50_PAD_EIM_DA13__GPIO_1_13, + MX50_PAD_EIM_DA14__GPIO_1_14, + MX50_PAD_EIM_DA15__GPIO_1_15, + MX50_PAD_EIM_CS2__GPIO_1_16, + MX50_PAD_EIM_CS1__GPIO_1_17, + MX50_PAD_EIM_CS0__GPIO_1_18, + MX50_PAD_EIM_EB0__GPIO_1_19, + MX50_PAD_EIM_EB1__GPIO_1_20, + MX50_PAD_EIM_WAIT__GPIO_1_21, + MX50_PAD_EIM_BCLK__GPIO_1_22, + MX50_PAD_EIM_RDY__GPIO_1_23, + MX50_PAD_EIM_OE__GPIO_1_24, +}; + +/* Serial ports */ +static const struct imxuart_platform_data uart_pdata __initconst = { + .flags = IMXUART_HAVE_RTSCTS, +}; + +/* + * Board specific initialization. + */ +static void __init mx50_rdp_board_init(void) +{ + mxc_iomux_v3_setup_multiple_pads(mx50_rdp_pads, + ARRAY_SIZE(mx50_rdp_pads)); + + imx50_add_imx_uart(0, &uart_pdata); + imx50_add_imx_uart(1, &uart_pdata); +} + +static void __init mx50_rdp_timer_init(void) +{ + mx50_clocks_init(32768, 24000000, 22579200); +} + +static struct sys_timer mx50_rdp_timer = { + .init = mx50_rdp_timer_init, +}; + +MACHINE_START(MX50_RDP, "Freescale MX50 Reference Design Platform") + .map_io = mx50_map_io, + .init_irq = mx50_init_irq, + .init_machine = mx50_rdp_board_init, + .timer = &mx50_rdp_timer, +MACHINE_END diff --git a/arch/arm/mach-mx5/board-mx51_3ds.c b/arch/arm/mach-mx5/board-mx51_3ds.c index 79ce8dcf3cd..e42bd2eb034 100644 --- a/arch/arm/mach-mx5/board-mx51_3ds.c +++ b/arch/arm/mach-mx5/board-mx51_3ds.c @@ -30,7 +30,7 @@ #define EXPIO_PARENT_INT (MXC_INTERNAL_IRQS + GPIO_PORTA + 6) #define MX51_3DS_ECSPI2_CS (GPIO_PORTC + 28) -static struct pad_desc mx51_3ds_pads[] = { +static iomux_v3_cfg_t mx51_3ds_pads[] = { /* UART1 */ MX51_PAD_UART1_RXD__UART1_RXD, MX51_PAD_UART1_TXD__UART1_TXD, @@ -50,7 +50,7 @@ static struct pad_desc mx51_3ds_pads[] = { MX51_PAD_EIM_D27__UART3_RTS, /* CPLD PARENT IRQ PIN */ - MX51_PAD_GPIO_1_6__GPIO_1_6, + MX51_PAD_GPIO1_6__GPIO1_6, /* KPP */ MX51_PAD_KEY_ROW0__KEY_ROW0, @@ -68,7 +68,7 @@ static struct pad_desc mx51_3ds_pads[] = { MX51_PAD_NANDF_RB2__ECSPI2_SCLK, MX51_PAD_NANDF_RB3__ECSPI2_MISO, MX51_PAD_NANDF_D15__ECSPI2_MOSI, - MX51_PAD_NANDF_D12__GPIO_3_28, + MX51_PAD_NANDF_D12__GPIO3_28, }; /* Serial ports */ @@ -172,6 +172,7 @@ static void __init mxc_board_init(void) printk(KERN_WARNING "Init of the debugboard failed, all " "devices on the board are unusable.\n"); + imx51_add_sdhci_esdhc_imx(0, NULL); mxc_init_keypad(); } @@ -186,7 +187,7 @@ static struct sys_timer mxc_timer = { MACHINE_START(MX51_3DS, "Freescale MX51 3-Stack Board") /* Maintainer: Freescale Semiconductor, Inc. */ - .boot_params = PHYS_OFFSET + 0x100, + .boot_params = MX51_PHYS_OFFSET + 0x100, .map_io = mx51_map_io, .init_irq = mx51_init_irq, .init_machine = mxc_board_init, diff --git a/arch/arm/mach-mx5/board-mx51_babbage.c b/arch/arm/mach-mx5/board-mx51_babbage.c index acbe30df2e6..1d231e84107 100644 --- a/arch/arm/mach-mx5/board-mx51_babbage.c +++ b/arch/arm/mach-mx5/board-mx51_babbage.c @@ -20,6 +20,8 @@ #include <linux/fec.h> #include <linux/gpio_keys.h> #include <linux/input.h> +#include <linux/spi/flash.h> +#include <linux/spi/spi.h> #include <mach/common.h> #include <mach/hardware.h> @@ -36,11 +38,13 @@ #include "devices.h" #include "cpu_op-mx51.h" -#define BABBAGE_USB_HUB_RESET (0*32 + 7) /* GPIO_1_7 */ -#define BABBAGE_USBH1_STP (0*32 + 27) /* GPIO_1_27 */ -#define BABBAGE_PHY_RESET (1*32 + 5) /* GPIO_2_5 */ -#define BABBAGE_FEC_PHY_RESET (1*32 + 14) /* GPIO_2_14 */ -#define BABBAGE_POWER_KEY (1*32 + 21) /* GPIO_2_21 */ +#define BABBAGE_USB_HUB_RESET IMX_GPIO_NR(1, 7) +#define BABBAGE_USBH1_STP IMX_GPIO_NR(1, 27) +#define BABBAGE_PHY_RESET IMX_GPIO_NR(2, 5) +#define BABBAGE_FEC_PHY_RESET IMX_GPIO_NR(2, 14) +#define BABBAGE_POWER_KEY IMX_GPIO_NR(2, 21) +#define BABBAGE_ECSPI1_CS0 IMX_GPIO_NR(4, 24) +#define BABBAGE_ECSPI1_CS1 IMX_GPIO_NR(4, 25) /* USB_CTRL_1 */ #define MX51_USB_CTRL_1_OFFSET 0x10 @@ -65,7 +69,7 @@ static const struct gpio_keys_platform_data imx_button_data __initconst = { .nbuttons = ARRAY_SIZE(babbage_buttons), }; -static struct pad_desc mx51babbage_pads[] = { +static iomux_v3_cfg_t mx51babbage_pads[] = { /* UART1 */ MX51_PAD_UART1_RXD__UART1_RXD, MX51_PAD_UART1_TXD__UART1_TXD, @@ -91,8 +95,8 @@ static struct pad_desc mx51babbage_pads[] = { MX51_PAD_KEY_COL5__I2C2_SDA, /* HSI2C */ - MX51_PAD_I2C1_CLK__HSI2C_CLK, - MX51_PAD_I2C1_DAT__HSI2C_DAT, + MX51_PAD_I2C1_CLK__I2C1_CLK, + MX51_PAD_I2C1_DAT__I2C1_DAT, /* USB HOST1 */ MX51_PAD_USBH1_CLK__USBH1_CLK, @@ -108,29 +112,29 @@ static struct pad_desc mx51babbage_pads[] = { MX51_PAD_USBH1_DATA7__USBH1_DATA7, /* USB HUB reset line*/ - MX51_PAD_GPIO_1_7__GPIO_1_7, + MX51_PAD_GPIO1_7__GPIO1_7, /* FEC */ MX51_PAD_EIM_EB2__FEC_MDIO, - MX51_PAD_EIM_EB3__FEC_RDAT1, - MX51_PAD_EIM_CS2__FEC_RDAT2, - MX51_PAD_EIM_CS3__FEC_RDAT3, + MX51_PAD_EIM_EB3__FEC_RDATA1, + MX51_PAD_EIM_CS2__FEC_RDATA2, + MX51_PAD_EIM_CS3__FEC_RDATA3, MX51_PAD_EIM_CS4__FEC_RX_ER, MX51_PAD_EIM_CS5__FEC_CRS, MX51_PAD_NANDF_RB2__FEC_COL, - MX51_PAD_NANDF_RB3__FEC_RXCLK, - MX51_PAD_NANDF_RB6__FEC_RDAT0, - MX51_PAD_NANDF_RB7__FEC_TDAT0, + MX51_PAD_NANDF_RB3__FEC_RX_CLK, + MX51_PAD_NANDF_D9__FEC_RDATA0, + MX51_PAD_NANDF_D8__FEC_TDATA0, MX51_PAD_NANDF_CS2__FEC_TX_ER, MX51_PAD_NANDF_CS3__FEC_MDC, - MX51_PAD_NANDF_CS4__FEC_TDAT1, - MX51_PAD_NANDF_CS5__FEC_TDAT2, - MX51_PAD_NANDF_CS6__FEC_TDAT3, + MX51_PAD_NANDF_CS4__FEC_TDATA1, + MX51_PAD_NANDF_CS5__FEC_TDATA2, + MX51_PAD_NANDF_CS6__FEC_TDATA3, MX51_PAD_NANDF_CS7__FEC_TX_EN, MX51_PAD_NANDF_RDY_INT__FEC_TX_CLK, /* FEC PHY reset line */ - MX51_PAD_EIM_A20__GPIO_2_14, + MX51_PAD_EIM_A20__GPIO2_14, /* SD 1 */ MX51_PAD_SD1_CMD__SD1_CMD, @@ -147,6 +151,13 @@ static struct pad_desc mx51babbage_pads[] = { MX51_PAD_SD2_DATA1__SD2_DATA1, MX51_PAD_SD2_DATA2__SD2_DATA2, MX51_PAD_SD2_DATA3__SD2_DATA3, + + /* eCSPI1 */ + MX51_PAD_CSPI1_MISO__ECSPI1_MISO, + MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI, + MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK, + MX51_PAD_CSPI1_SS0__GPIO4_24, + MX51_PAD_CSPI1_SS1__GPIO4_25, }; /* Serial ports */ @@ -177,12 +188,12 @@ static struct imxi2c_platform_data babbage_hsi2c_data = { static int gpio_usbh1_active(void) { - struct pad_desc usbh1stp_gpio = MX51_PAD_USBH1_STP__GPIO_1_27; - struct pad_desc phyreset_gpio = MX51_PAD_EIM_D21__GPIO_2_5; + iomux_v3_cfg_t usbh1stp_gpio = MX51_PAD_USBH1_STP__GPIO1_27; + iomux_v3_cfg_t phyreset_gpio = MX51_PAD_EIM_D21__GPIO2_5; int ret; /* Set USBH1_STP to GPIO and toggle it */ - mxc_iomux_v3_setup_pad(&usbh1stp_gpio); + mxc_iomux_v3_setup_pad(usbh1stp_gpio); ret = gpio_request(BABBAGE_USBH1_STP, "usbh1_stp"); if (ret) { @@ -195,7 +206,7 @@ static int gpio_usbh1_active(void) gpio_free(BABBAGE_USBH1_STP); /* De-assert USB PHY RESETB */ - mxc_iomux_v3_setup_pad(&phyreset_gpio); + mxc_iomux_v3_setup_pad(phyreset_gpio); ret = gpio_request(BABBAGE_PHY_RESET, "phy_reset"); if (ret) { @@ -251,6 +262,8 @@ static int initialize_otg_port(struct platform_device *pdev) void __iomem *usbother_base; usb_base = ioremap(MX51_OTG_BASE_ADDR, SZ_4K); + if (!usb_base) + return -ENOMEM; usbother_base = usb_base + MX5_USBOTHER_REGS_OFFSET; /* Set the PHY clock to 19.2MHz */ @@ -269,6 +282,8 @@ static int initialize_usbh1_port(struct platform_device *pdev) void __iomem *usbother_base; usb_base = ioremap(MX51_OTG_BASE_ADDR, SZ_4K); + if (!usb_base) + return -ENOMEM; usbother_base = usb_base + MX5_USBOTHER_REGS_OFFSET; /* The clock for the USBH1 ULPI port will come externally from the PHY. */ @@ -310,13 +325,35 @@ static int __init babbage_otg_mode(char *options) } __setup("otg_mode=", babbage_otg_mode); +static struct spi_board_info mx51_babbage_spi_board_info[] __initdata = { + { + .modalias = "mtd_dataflash", + .max_speed_hz = 25000000, + .bus_num = 0, + .chip_select = 1, + .mode = SPI_MODE_0, + .platform_data = NULL, + }, +}; + +static int mx51_babbage_spi_cs[] = { + BABBAGE_ECSPI1_CS0, + BABBAGE_ECSPI1_CS1, +}; + +static const struct spi_imx_master mx51_babbage_spi_pdata __initconst = { + .chipselect = mx51_babbage_spi_cs, + .num_chipselect = ARRAY_SIZE(mx51_babbage_spi_cs), +}; + /* * Board specific initialization. */ static void __init mxc_board_init(void) { - struct pad_desc usbh1stp = MX51_PAD_USBH1_STP__USBH1_STP; - struct pad_desc power_key = MX51_PAD_EIM_A27__GPIO_2_21; + iomux_v3_cfg_t usbh1stp = MX51_PAD_USBH1_STP__USBH1_STP; + iomux_v3_cfg_t power_key = _MX51_PAD_EIM_A27__GPIO2_21 | + MUX_PAD_CTRL(PAD_CTL_SRE_FAST | PAD_CTL_DSE_HIGH | PAD_CTL_PUS_100K_UP); #if defined(CONFIG_CPU_FREQ_IMX) get_cpu_op = mx51_get_cpu_op; @@ -328,8 +365,7 @@ static void __init mxc_board_init(void) imx51_add_fec(NULL); /* Set the PAD settings for the pwr key. */ - power_key.pad_ctrl = MX51_GPIO_PAD_CTRL_2; - mxc_iomux_v3_setup_pad(&power_key); + mxc_iomux_v3_setup_pad(power_key); imx51_add_gpio_keys(&imx_button_data); imx51_add_imx_i2c(0, &babbage_i2c_data); @@ -346,11 +382,16 @@ static void __init mxc_board_init(void) gpio_usbh1_active(); mxc_register_device(&mxc_usbh1_device, &usbh1_config); /* setback USBH1_STP to be function */ - mxc_iomux_v3_setup_pad(&usbh1stp); + mxc_iomux_v3_setup_pad(usbh1stp); babbage_usbhub_reset(); - imx51_add_esdhc(0, NULL); - imx51_add_esdhc(1, NULL); + imx51_add_sdhci_esdhc_imx(0, NULL); + imx51_add_sdhci_esdhc_imx(1, NULL); + + spi_register_board_info(mx51_babbage_spi_board_info, + ARRAY_SIZE(mx51_babbage_spi_board_info)); + imx51_add_ecspi(0, &mx51_babbage_spi_pdata); + imx51_add_imx2_wdt(0, NULL); } static void __init mx51_babbage_timer_init(void) diff --git a/arch/arm/mach-mx5/board-mx51_efikamx.c b/arch/arm/mach-mx5/board-mx51_efikamx.c index 6e623bda3ee..b7946f8e8d4 100644 --- a/arch/arm/mach-mx5/board-mx51_efikamx.c +++ b/arch/arm/mach-mx5/board-mx51_efikamx.c @@ -18,9 +18,13 @@ #include <linux/platform_device.h> #include <linux/i2c.h> #include <linux/gpio.h> +#include <linux/leds.h> +#include <linux/input.h> #include <linux/delay.h> #include <linux/io.h> #include <linux/fsl_devices.h> +#include <linux/spi/flash.h> +#include <linux/spi/spi.h> #include <mach/common.h> #include <mach/hardware.h> @@ -39,12 +43,81 @@ #define MX51_USB_PLL_DIV_24_MHZ 0x01 -static struct pad_desc mx51efikamx_pads[] = { +#define EFIKAMX_PCBID0 IMX_GPIO_NR(3, 16) +#define EFIKAMX_PCBID1 IMX_GPIO_NR(3, 17) +#define EFIKAMX_PCBID2 IMX_GPIO_NR(3, 11) + +#define EFIKAMX_BLUE_LED IMX_GPIO_NR(3, 13) +#define EFIKAMX_GREEN_LED IMX_GPIO_NR(3, 14) +#define EFIKAMX_RED_LED IMX_GPIO_NR(3, 15) + +#define EFIKAMX_POWER_KEY IMX_GPIO_NR(2, 31) + +#define EFIKAMX_SPI_CS0 IMX_GPIO_NR(4, 24) +#define EFIKAMX_SPI_CS1 IMX_GPIO_NR(4, 25) + +/* board 1.1 doesn't have same reset gpio */ +#define EFIKAMX_RESET1_1 IMX_GPIO_NR(3, 2) +#define EFIKAMX_RESET IMX_GPIO_NR(1, 4) + +/* the pci ids pin have pull up. they're driven low according to board id */ +#define MX51_PAD_PCBID0 IOMUX_PAD(0x518, 0x130, 3, 0x0, 0, PAD_CTL_PUS_100K_UP) +#define MX51_PAD_PCBID1 IOMUX_PAD(0x51C, 0x134, 3, 0x0, 0, PAD_CTL_PUS_100K_UP) +#define MX51_PAD_PCBID2 IOMUX_PAD(0x504, 0x128, 3, 0x0, 0, PAD_CTL_PUS_100K_UP) +#define MX51_PAD_PWRKEY IOMUX_PAD(0x48c, 0x0f8, 1, 0x0, 0, PAD_CTL_PUS_100K_UP | PAD_CTL_PKE) + +static iomux_v3_cfg_t mx51efikamx_pads[] = { /* UART1 */ MX51_PAD_UART1_RXD__UART1_RXD, MX51_PAD_UART1_TXD__UART1_TXD, MX51_PAD_UART1_RTS__UART1_RTS, MX51_PAD_UART1_CTS__UART1_CTS, + /* board id */ + MX51_PAD_PCBID0, + MX51_PAD_PCBID1, + MX51_PAD_PCBID2, + + /* SD 1 */ + MX51_PAD_SD1_CMD__SD1_CMD, + MX51_PAD_SD1_CLK__SD1_CLK, + MX51_PAD_SD1_DATA0__SD1_DATA0, + MX51_PAD_SD1_DATA1__SD1_DATA1, + MX51_PAD_SD1_DATA2__SD1_DATA2, + MX51_PAD_SD1_DATA3__SD1_DATA3, + + /* SD 2 */ + MX51_PAD_SD2_CMD__SD2_CMD, + MX51_PAD_SD2_CLK__SD2_CLK, + MX51_PAD_SD2_DATA0__SD2_DATA0, + MX51_PAD_SD2_DATA1__SD2_DATA1, + MX51_PAD_SD2_DATA2__SD2_DATA2, + MX51_PAD_SD2_DATA3__SD2_DATA3, + + /* SD/MMC WP/CD */ + MX51_PAD_GPIO1_0__SD1_CD, + MX51_PAD_GPIO1_1__SD1_WP, + MX51_PAD_GPIO1_7__SD2_WP, + MX51_PAD_GPIO1_8__SD2_CD, + + /* leds */ + MX51_PAD_CSI1_D9__GPIO3_13, + MX51_PAD_CSI1_VSYNC__GPIO3_14, + MX51_PAD_CSI1_HSYNC__GPIO3_15, + + /* power key */ + MX51_PAD_PWRKEY, + + /* spi */ + MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI, + MX51_PAD_CSPI1_MISO__ECSPI1_MISO, + MX51_PAD_CSPI1_SS0__GPIO4_24, + MX51_PAD_CSPI1_SS1__GPIO4_25, + MX51_PAD_CSPI1_RDY__ECSPI1_RDY, + MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK, + + /* reset */ + MX51_PAD_DI1_PIN13__GPIO3_2, + MX51_PAD_GPIO1_4__GPIO1_4, }; /* Serial ports */ @@ -75,6 +148,8 @@ static int initialize_otg_port(struct platform_device *pdev) void __iomem *usb_base; void __iomem *usbother_base; usb_base = ioremap(MX51_OTG_BASE_ADDR, SZ_4K); + if (!usb_base) + return -ENOMEM; usbother_base = (void __iomem *)(usb_base + MX5_USBOTHER_REGS_OFFSET); /* Set the PHY clock to 19.2MHz */ @@ -92,12 +167,182 @@ static struct mxc_usbh_platform_data dr_utmi_config = { .flags = MXC_EHCI_INTERNAL_PHY, }; +/* PCBID2 PCBID1 PCBID0 STATE + 1 1 1 ER1:rev1.1 + 1 1 0 ER2:rev1.2 + 1 0 1 ER3:rev1.3 + 1 0 0 ER4:rev1.4 +*/ +static void __init mx51_efikamx_board_id(void) +{ + int id; + + /* things are taking time to settle */ + msleep(150); + + gpio_request(EFIKAMX_PCBID0, "pcbid0"); + gpio_direction_input(EFIKAMX_PCBID0); + gpio_request(EFIKAMX_PCBID1, "pcbid1"); + gpio_direction_input(EFIKAMX_PCBID1); + gpio_request(EFIKAMX_PCBID2, "pcbid2"); + gpio_direction_input(EFIKAMX_PCBID2); + + id = gpio_get_value(EFIKAMX_PCBID0); + id |= gpio_get_value(EFIKAMX_PCBID1) << 1; + id |= gpio_get_value(EFIKAMX_PCBID2) << 2; + + switch (id) { + case 7: + system_rev = 0x11; + break; + case 6: + system_rev = 0x12; + break; + case 5: + system_rev = 0x13; + break; + case 4: + system_rev = 0x14; + break; + default: + system_rev = 0x10; + break; + } + + if ((system_rev == 0x10) + || (system_rev == 0x12) + || (system_rev == 0x14)) { + printk(KERN_WARNING + "EfikaMX: Unsupported board revision 1.%u!\n", + system_rev & 0xf); + } +} + +static struct gpio_led mx51_efikamx_leds[] = { + { + .name = "efikamx:green", + .default_trigger = "default-on", + .gpio = EFIKAMX_GREEN_LED, + }, + { + .name = "efikamx:red", + .default_trigger = "ide-disk", + .gpio = EFIKAMX_RED_LED, + }, + { + .name = "efikamx:blue", + .default_trigger = "mmc0", + .gpio = EFIKAMX_BLUE_LED, + }, +}; + +static struct gpio_led_platform_data mx51_efikamx_leds_data = { + .leds = mx51_efikamx_leds, + .num_leds = ARRAY_SIZE(mx51_efikamx_leds), +}; + +static struct platform_device mx51_efikamx_leds_device = { + .name = "leds-gpio", + .id = -1, + .dev = { + .platform_data = &mx51_efikamx_leds_data, + }, +}; + +static struct gpio_keys_button mx51_efikamx_powerkey[] = { + { + .code = KEY_POWER, + .gpio = EFIKAMX_POWER_KEY, + .type = EV_PWR, + .desc = "Power Button (CM)", + .wakeup = 1, + .debounce_interval = 10, /* ms */ + }, +}; + +static const struct gpio_keys_platform_data mx51_efikamx_powerkey_data __initconst = { + .buttons = mx51_efikamx_powerkey, + .nbuttons = ARRAY_SIZE(mx51_efikamx_powerkey), +}; + +static struct mtd_partition mx51_efikamx_spi_nor_partitions[] = { + { + .name = "u-boot", + .offset = 0, + .size = SZ_256K, + }, + { + .name = "config", + .offset = MTDPART_OFS_APPEND, + .size = SZ_64K, + }, +}; + +static struct flash_platform_data mx51_efikamx_spi_flash_data = { + .name = "spi_flash", + .parts = mx51_efikamx_spi_nor_partitions, + .nr_parts = ARRAY_SIZE(mx51_efikamx_spi_nor_partitions), + .type = "sst25vf032b", +}; + +static struct spi_board_info mx51_efikamx_spi_board_info[] __initdata = { + { + .modalias = "m25p80", + .max_speed_hz = 25000000, + .bus_num = 0, + .chip_select = 1, + .platform_data = &mx51_efikamx_spi_flash_data, + .irq = -1, + }, +}; + +static int mx51_efikamx_spi_cs[] = { + EFIKAMX_SPI_CS0, + EFIKAMX_SPI_CS1, +}; + +static const struct spi_imx_master mx51_efikamx_spi_pdata __initconst = { + .chipselect = mx51_efikamx_spi_cs, + .num_chipselect = ARRAY_SIZE(mx51_efikamx_spi_cs), +}; + +void mx51_efikamx_reset(void) +{ + if (system_rev == 0x11) + gpio_direction_output(EFIKAMX_RESET1_1, 0); + else + gpio_direction_output(EFIKAMX_RESET, 0); +} + static void __init mxc_board_init(void) { mxc_iomux_v3_setup_multiple_pads(mx51efikamx_pads, ARRAY_SIZE(mx51efikamx_pads)); + mx51_efikamx_board_id(); mxc_register_device(&mxc_usbdr_host_device, &dr_utmi_config); mxc_init_imx_uart(); + imx51_add_sdhci_esdhc_imx(0, NULL); + + /* on < 1.2 boards both SD controllers are used */ + if (system_rev < 0x12) { + imx51_add_sdhci_esdhc_imx(1, NULL); + mx51_efikamx_leds[2].default_trigger = "mmc1"; + } + + platform_device_register(&mx51_efikamx_leds_device); + imx51_add_gpio_keys(&mx51_efikamx_powerkey_data); + + spi_register_board_info(mx51_efikamx_spi_board_info, + ARRAY_SIZE(mx51_efikamx_spi_board_info)); + imx51_add_ecspi(0, &mx51_efikamx_spi_pdata); + + if (system_rev == 0x11) { + gpio_request(EFIKAMX_RESET1_1, "reset"); + gpio_direction_output(EFIKAMX_RESET1_1, 1); + } else { + gpio_request(EFIKAMX_RESET, "reset"); + gpio_direction_output(EFIKAMX_RESET, 1); + } } static void __init mx51_efikamx_timer_init(void) diff --git a/arch/arm/mach-mx5/board-mx53_evk.c b/arch/arm/mach-mx5/board-mx53_evk.c new file mode 100644 index 00000000000..fa97d0d5dd0 --- /dev/null +++ b/arch/arm/mach-mx5/board-mx53_evk.c @@ -0,0 +1,84 @@ +/* + * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright (C) 2010 Yong Shen. <Yong.Shen@linaro.org> + */ + +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + */ + +#include <linux/init.h> +#include <linux/clk.h> +#include <mach/common.h> +#include <mach/hardware.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/time.h> +#include <mach/imx-uart.h> +#include <mach/iomux-mx53.h> + +#include "crm_regs.h" +#include "devices-imx53.h" + +static iomux_v3_cfg_t mx53_evk_pads[] = { + MX53_PAD_CSI0_D10__UART1_TXD, + MX53_PAD_CSI0_D11__UART1_RXD, + MX53_PAD_ATA_DIOW__UART1_TXD, + MX53_PAD_ATA_DMACK__UART1_RXD, + + MX53_PAD_ATA_BUFFER_EN__UART2_RXD, + MX53_PAD_ATA_DMARQ__UART2_TXD, + MX53_PAD_ATA_DIOR__UART2_RTS, + MX53_PAD_ATA_INTRQ__UART2_CTS, + + MX53_PAD_ATA_CS_0__UART3_TXD, + MX53_PAD_ATA_CS_1__UART3_RXD, + MX53_PAD_ATA_DA_1__UART3_CTS, + MX53_PAD_ATA_DA_2__UART3_RTS, +}; + +static const struct imxuart_platform_data mx53_evk_uart_pdata __initconst = { + .flags = IMXUART_HAVE_RTSCTS, +}; + +static inline void mx53_evk_init_uart(void) +{ + imx53_add_imx_uart(0, &mx53_evk_uart_pdata); + imx53_add_imx_uart(1, &mx53_evk_uart_pdata); + imx53_add_imx_uart(2, &mx53_evk_uart_pdata); +} + +static void __init mx53_evk_board_init(void) +{ + mxc_iomux_v3_setup_multiple_pads(mx53_evk_pads, + ARRAY_SIZE(mx53_evk_pads)); + mx53_evk_init_uart(); +} + +static void __init mx53_evk_timer_init(void) +{ + mx53_clocks_init(32768, 24000000, 22579200, 0); +} + +static struct sys_timer mx53_evk_timer = { + .init = mx53_evk_timer_init, +}; + +MACHINE_START(MX53_EVK, "Freescale MX53 EVK Board") + .map_io = mx53_map_io, + .init_irq = mx53_init_irq, + .init_machine = mx53_evk_board_init, + .timer = &mx53_evk_timer, +MACHINE_END diff --git a/arch/arm/mach-mx5/clock-mx51.c b/arch/arm/mach-mx5/clock-mx51-mx53.c index 8ac36d88292..b21bc47d482 100644 --- a/arch/arm/mach-mx5/clock-mx51.c +++ b/arch/arm/mach-mx5/clock-mx51-mx53.c @@ -33,11 +33,15 @@ static struct clk pll1_main_clk; static struct clk pll1_sw_clk; static struct clk pll2_sw_clk; static struct clk pll3_sw_clk; +static struct clk mx53_pll4_sw_clk; static struct clk lp_apm_clk; static struct clk periph_apm_clk; static struct clk ahb_clk; static struct clk ipg_clk; static struct clk usboh3_clk; +static struct clk emi_fast_clk; +static struct clk ipu_clk; +static struct clk mipi_hsc1_clk; #define MAX_DPLL_WAIT_TRIES 1000 /* 1000 * udelay(1) = 1ms */ @@ -123,7 +127,7 @@ static inline u32 _get_mux(struct clk *parent, struct clk *m0, return -EINVAL; } -static inline void __iomem *_get_pll_base(struct clk *pll) +static inline void __iomem *_mx51_get_pll_base(struct clk *pll) { if (pll == &pll1_main_clk) return MX51_DPLL1_BASE; @@ -137,6 +141,30 @@ static inline void __iomem *_get_pll_base(struct clk *pll) return NULL; } +static inline void __iomem *_mx53_get_pll_base(struct clk *pll) +{ + if (pll == &pll1_main_clk) + return MX53_DPLL1_BASE; + else if (pll == &pll2_sw_clk) + return MX53_DPLL2_BASE; + else if (pll == &pll3_sw_clk) + return MX53_DPLL3_BASE; + else if (pll == &mx53_pll4_sw_clk) + return MX53_DPLL4_BASE; + else + BUG(); + + return NULL; +} + +static inline void __iomem *_get_pll_base(struct clk *pll) +{ + if (cpu_is_mx51()) + return _mx51_get_pll_base(pll); + else + return _mx53_get_pll_base(pll); +} + static unsigned long clk_pll_get_rate(struct clk *clk) { long mfi, mfn, mfd, pdf, ref_clk, mfn_abs; @@ -514,7 +542,10 @@ static int _clk_max_enable(struct clk *clk) /* Handshake with MAX when LPM is entered. */ reg = __raw_readl(MXC_CCM_CLPCR); - reg &= ~MXC_CCM_CLPCR_BYPASS_MAX_LPM_HS; + if (cpu_is_mx51()) + reg &= ~MX51_CCM_CLPCR_BYPASS_MAX_LPM_HS; + else if (cpu_is_mx53()) + reg &= ~MX53_CCM_CLPCR_BYPASS_MAX_LPM_HS; __raw_writel(reg, MXC_CCM_CLPCR); return 0; @@ -528,7 +559,10 @@ static void _clk_max_disable(struct clk *clk) /* No Handshake with MAX when LPM is entered as its disabled. */ reg = __raw_readl(MXC_CCM_CLPCR); - reg |= MXC_CCM_CLPCR_BYPASS_MAX_LPM_HS; + if (cpu_is_mx51()) + reg |= MX51_CCM_CLPCR_BYPASS_MAX_LPM_HS; + else if (cpu_is_mx53()) + reg &= ~MX53_CCM_CLPCR_BYPASS_MAX_LPM_HS; __raw_writel(reg, MXC_CCM_CLPCR); } @@ -679,6 +713,19 @@ static unsigned long clk_emi_slow_get_rate(struct clk *clk) return clk_get_rate(clk->parent) / div; } +static unsigned long _clk_ddr_hf_get_rate(struct clk *clk) +{ + unsigned long rate; + u32 reg, div; + + reg = __raw_readl(MXC_CCM_CBCDR); + div = ((reg & MXC_CCM_CBCDR_DDR_PODF_MASK) >> + MXC_CCM_CBCDR_DDR_PODF_OFFSET) + 1; + rate = clk_get_rate(clk->parent) / div; + + return rate; +} + /* External high frequency clock */ static struct clk ckih_clk = { .get_rate = get_high_reference_clock_rate, @@ -739,6 +786,14 @@ static struct clk pll3_sw_clk = { .disable = _clk_pll_disable, }; +/* PLL4 SW supplies to LVDS Display Bridge(LDB) */ +static struct clk mx53_pll4_sw_clk = { + .parent = &osc_clk, + .set_rate = _clk_pll_set_rate, + .enable = _clk_pll_enable, + .disable = _clk_pll_disable, +}; + /* Low-power Audio Playback Mode clock */ static struct clk lp_apm_clk = { .parent = &osc_clk, @@ -763,6 +818,12 @@ static struct clk ahb_clk = { .round_rate = _clk_ahb_round_rate, }; +static struct clk iim_clk = { + .parent = &ipg_clk, + .enable_reg = MXC_CCM_CCGR0, + .enable_shift = MXC_CCM_CCGRx_CG15_OFFSET, +}; + /* Main IP interface clock for access to registers */ static struct clk ipg_clk = { .parent = &ahb_clk, @@ -810,6 +871,10 @@ static struct clk kpp_clk = { .id = 0, }; +static struct clk dummy_clk = { + .id = 0, +}; + static struct clk emi_slow_clk = { .parent = &pll2_sw_clk, .enable_reg = MXC_CCM_CCGR5, @@ -819,6 +884,109 @@ static struct clk emi_slow_clk = { .get_rate = clk_emi_slow_get_rate, }; +static int clk_ipu_enable(struct clk *clk) +{ + u32 reg; + + _clk_ccgr_enable(clk); + + /* Enable handshake with IPU when certain clock rates are changed */ + reg = __raw_readl(MXC_CCM_CCDR); + reg &= ~MXC_CCM_CCDR_IPU_HS_MASK; + __raw_writel(reg, MXC_CCM_CCDR); + + /* Enable handshake with IPU when LPM is entered */ + reg = __raw_readl(MXC_CCM_CLPCR); + reg &= ~MXC_CCM_CLPCR_BYPASS_IPU_LPM_HS; + __raw_writel(reg, MXC_CCM_CLPCR); + + return 0; +} + +static void clk_ipu_disable(struct clk *clk) +{ + u32 reg; + + _clk_ccgr_disable(clk); + + /* Disable handshake with IPU whe dividers are changed */ + reg = __raw_readl(MXC_CCM_CCDR); + reg |= MXC_CCM_CCDR_IPU_HS_MASK; + __raw_writel(reg, MXC_CCM_CCDR); + + /* Disable handshake with IPU when LPM is entered */ + reg = __raw_readl(MXC_CCM_CLPCR); + reg |= MXC_CCM_CLPCR_BYPASS_IPU_LPM_HS; + __raw_writel(reg, MXC_CCM_CLPCR); +} + +static struct clk ahbmux1_clk = { + .parent = &ahb_clk, + .secondary = &ahb_max_clk, + .enable_reg = MXC_CCM_CCGR0, + .enable_shift = MXC_CCM_CCGRx_CG8_OFFSET, + .enable = _clk_ccgr_enable, + .disable = _clk_ccgr_disable_inwait, +}; + +static struct clk ipu_sec_clk = { + .parent = &emi_fast_clk, + .secondary = &ahbmux1_clk, +}; + +static struct clk ddr_hf_clk = { + .parent = &pll1_sw_clk, + .get_rate = _clk_ddr_hf_get_rate, +}; + +static struct clk ddr_clk = { + .parent = &ddr_hf_clk, +}; + +/* clock definitions for MIPI HSC unit which has been removed + * from documentation, but not from hardware + */ +static int _clk_hsc_enable(struct clk *clk) +{ + u32 reg; + + _clk_ccgr_enable(clk); + /* Handshake with IPU when certain clock rates are changed. */ + reg = __raw_readl(MXC_CCM_CCDR); + reg &= ~MXC_CCM_CCDR_HSC_HS_MASK; + __raw_writel(reg, MXC_CCM_CCDR); + + reg = __raw_readl(MXC_CCM_CLPCR); + reg &= ~MXC_CCM_CLPCR_BYPASS_HSC_LPM_HS; + __raw_writel(reg, MXC_CCM_CLPCR); + + return 0; +} + +static void _clk_hsc_disable(struct clk *clk) +{ + u32 reg; + + _clk_ccgr_disable(clk); + /* No handshake with HSC as its not enabled. */ + reg = __raw_readl(MXC_CCM_CCDR); + reg |= MXC_CCM_CCDR_HSC_HS_MASK; + __raw_writel(reg, MXC_CCM_CCDR); + + reg = __raw_readl(MXC_CCM_CLPCR); + reg |= MXC_CCM_CLPCR_BYPASS_HSC_LPM_HS; + __raw_writel(reg, MXC_CCM_CLPCR); +} + +static struct clk mipi_hsp_clk = { + .parent = &ipu_clk, + .enable_reg = MXC_CCM_CCGR4, + .enable_shift = MXC_CCM_CCGRx_CG6_OFFSET, + .enable = _clk_hsc_enable, + .disable = _clk_hsc_disable, + .secondary = &mipi_hsc1_clk, +}; + #define DEFINE_CLOCK_CCGR(name, i, er, es, pfx, p, s) \ static struct clk name = { \ .id = i, \ @@ -927,6 +1095,41 @@ static struct clk usboh3_clk = { .parent = &pll2_sw_clk, .get_rate = clk_usboh3_get_rate, .set_parent = clk_usboh3_set_parent, + .enable = _clk_ccgr_enable, + .disable = _clk_ccgr_disable, + .enable_reg = MXC_CCM_CCGR2, + .enable_shift = MXC_CCM_CCGRx_CG14_OFFSET, +}; + +static struct clk usb_ahb_clk = { + .parent = &ipg_clk, + .enable = _clk_ccgr_enable, + .disable = _clk_ccgr_disable, + .enable_reg = MXC_CCM_CCGR2, + .enable_shift = MXC_CCM_CCGRx_CG13_OFFSET, +}; + +static int clk_usb_phy1_set_parent(struct clk *clk, struct clk *parent) +{ + u32 reg; + + reg = __raw_readl(MXC_CCM_CSCMR1) & ~MXC_CCM_CSCMR1_USB_PHY_CLK_SEL; + + if (parent == &pll3_sw_clk) + reg |= 1 << MXC_CCM_CSCMR1_USB_PHY_CLK_SEL_OFFSET; + + __raw_writel(reg, MXC_CCM_CSCMR1); + + return 0; +} + +static struct clk usb_phy1_clk = { + .parent = &pll3_sw_clk, + .set_parent = clk_usb_phy1_set_parent, + .enable = _clk_ccgr_enable, + .enable_reg = MXC_CCM_CCGR2, + .enable_shift = MXC_CCM_CCGRx_CG0_OFFSET, + .disable = _clk_ccgr_disable, }; /* eCSPI */ @@ -1013,6 +1216,10 @@ DEFINE_CLOCK(ssi2_ipg_clk, 1, MXC_CCM_CCGR3, MXC_CCM_CCGRx_CG10_OFFSET, NULL, NULL, &ipg_clk, NULL); DEFINE_CLOCK(ssi2_clk, 1, MXC_CCM_CCGR3, MXC_CCM_CCGRx_CG11_OFFSET, NULL, NULL, &pll3_sw_clk, &ssi2_ipg_clk); +DEFINE_CLOCK(ssi3_ipg_clk, 2, MXC_CCM_CCGR3, MXC_CCM_CCGRx_CG12_OFFSET, + NULL, NULL, &ipg_clk, NULL); +DEFINE_CLOCK(ssi3_clk, 2, MXC_CCM_CCGR3, MXC_CCM_CCGRx_CG13_OFFSET, + NULL, NULL, &pll3_sw_clk, &ssi3_ipg_clk); /* eCSPI */ DEFINE_CLOCK_FULL(ecspi1_ipg_clk, 0, MXC_CCM_CCGR4, MXC_CCM_CCGRx_CG9_OFFSET, @@ -1046,6 +1253,23 @@ DEFINE_CLOCK_FULL(esdhc2_ipg_clk, 1, MXC_CCM_CCGR3, MXC_CCM_CCGRx_CG2_OFFSET, DEFINE_CLOCK_MAX(esdhc2_clk, 1, MXC_CCM_CCGR3, MXC_CCM_CCGRx_CG3_OFFSET, clk_esdhc2, &pll2_sw_clk, &esdhc2_ipg_clk); +DEFINE_CLOCK(mipi_esc_clk, 0, MXC_CCM_CCGR4, MXC_CCM_CCGRx_CG5_OFFSET, NULL, NULL, NULL, &pll2_sw_clk); +DEFINE_CLOCK(mipi_hsc2_clk, 0, MXC_CCM_CCGR4, MXC_CCM_CCGRx_CG4_OFFSET, NULL, NULL, &mipi_esc_clk, &pll2_sw_clk); +DEFINE_CLOCK(mipi_hsc1_clk, 0, MXC_CCM_CCGR4, MXC_CCM_CCGRx_CG3_OFFSET, NULL, NULL, &mipi_hsc2_clk, &pll2_sw_clk); + +/* IPU */ +DEFINE_CLOCK_FULL(ipu_clk, 0, MXC_CCM_CCGR5, MXC_CCM_CCGRx_CG5_OFFSET, + NULL, NULL, clk_ipu_enable, clk_ipu_disable, &ahb_clk, &ipu_sec_clk); + +DEFINE_CLOCK_FULL(emi_fast_clk, 0, MXC_CCM_CCGR5, MXC_CCM_CCGRx_CG7_OFFSET, + NULL, NULL, _clk_ccgr_enable, _clk_ccgr_disable_inwait, + &ddr_clk, NULL); + +DEFINE_CLOCK(ipu_di0_clk, 0, MXC_CCM_CCGR6, MXC_CCM_CCGRx_CG5_OFFSET, + NULL, NULL, &pll3_sw_clk, NULL); +DEFINE_CLOCK(ipu_di1_clk, 0, MXC_CCM_CCGR6, MXC_CCM_CCGRx_CG6_OFFSET, + NULL, NULL, &pll3_sw_clk, NULL); + #define _REGISTER_CLOCK(d, n, c) \ { \ .dev_id = d, \ @@ -1053,7 +1277,7 @@ DEFINE_CLOCK_MAX(esdhc2_clk, 1, MXC_CCM_CCGR3, MXC_CCM_CCGRx_CG3_OFFSET, .clk = &c, \ }, -static struct clk_lookup lookups[] = { +static struct clk_lookup mx51_lookups[] = { _REGISTER_CLOCK("imx-uart.0", NULL, uart1_clk) _REGISTER_CLOCK("imx-uart.1", NULL, uart2_clk) _REGISTER_CLOCK("imx-uart.2", NULL, uart3_clk) @@ -1063,15 +1287,19 @@ static struct clk_lookup lookups[] = { _REGISTER_CLOCK("imx-i2c.1", NULL, i2c2_clk) _REGISTER_CLOCK("imx-i2c.2", NULL, hsi2c_clk) _REGISTER_CLOCK("mxc-ehci.0", "usb", usboh3_clk) - _REGISTER_CLOCK("mxc-ehci.0", "usb_ahb", ahb_clk) + _REGISTER_CLOCK("mxc-ehci.0", "usb_ahb", usb_ahb_clk) + _REGISTER_CLOCK("mxc-ehci.0", "usb_phy1", usb_phy1_clk) _REGISTER_CLOCK("mxc-ehci.1", "usb", usboh3_clk) - _REGISTER_CLOCK("mxc-ehci.1", "usb_ahb", ahb_clk) + _REGISTER_CLOCK("mxc-ehci.1", "usb_ahb", usb_ahb_clk) + _REGISTER_CLOCK("mxc-ehci.2", "usb", usboh3_clk) + _REGISTER_CLOCK("mxc-ehci.2", "usb_ahb", usb_ahb_clk) _REGISTER_CLOCK("fsl-usb2-udc", "usb", usboh3_clk) _REGISTER_CLOCK("fsl-usb2-udc", "usb_ahb", ahb_clk) _REGISTER_CLOCK("imx-keypad.0", NULL, kpp_clk) _REGISTER_CLOCK("mxc_nand", NULL, nfc_clk) _REGISTER_CLOCK("imx-ssi.0", NULL, ssi1_clk) _REGISTER_CLOCK("imx-ssi.1", NULL, ssi2_clk) + _REGISTER_CLOCK("imx-ssi.2", NULL, ssi3_clk) _REGISTER_CLOCK("imx-sdma", NULL, sdma_clk) _REGISTER_CLOCK(NULL, "ckih", ckih_clk) _REGISTER_CLOCK(NULL, "ckih2", ckih2_clk) @@ -1082,6 +1310,22 @@ static struct clk_lookup lookups[] = { _REGISTER_CLOCK("sdhci-esdhc-imx.0", NULL, esdhc1_clk) _REGISTER_CLOCK("sdhci-esdhc-imx.1", NULL, esdhc2_clk) _REGISTER_CLOCK(NULL, "cpu_clk", cpu_clk) + _REGISTER_CLOCK(NULL, "iim_clk", iim_clk) + _REGISTER_CLOCK("imx2-wdt.0", NULL, dummy_clk) + _REGISTER_CLOCK("imx2-wdt.1", NULL, dummy_clk) + _REGISTER_CLOCK(NULL, "mipi_hsp", mipi_hsp_clk) + _REGISTER_CLOCK("imx-ipuv3", NULL, ipu_clk) + _REGISTER_CLOCK("imx-ipuv3", "di0", ipu_di0_clk) + _REGISTER_CLOCK("imx-ipuv3", "di1", ipu_di1_clk) +}; + +static struct clk_lookup mx53_lookups[] = { + _REGISTER_CLOCK("imx-uart.0", NULL, uart1_clk) + _REGISTER_CLOCK("imx-uart.1", NULL, uart2_clk) + _REGISTER_CLOCK("imx-uart.2", NULL, uart3_clk) + _REGISTER_CLOCK(NULL, "gpt", gpt_clk) + _REGISTER_CLOCK("fec.0", NULL, fec_clk) + _REGISTER_CLOCK(NULL, "iim_clk", iim_clk) }; static void clk_tree_init(void) @@ -1114,14 +1358,22 @@ int __init mx51_clocks_init(unsigned long ckil, unsigned long osc, ckih2_reference = ckih2; oscillator_reference = osc; - for (i = 0; i < ARRAY_SIZE(lookups); i++) - clkdev_add(&lookups[i]); + for (i = 0; i < ARRAY_SIZE(mx51_lookups); i++) + clkdev_add(&mx51_lookups[i]); clk_tree_init(); + clk_set_parent(&uart_root_clk, &pll3_sw_clk); clk_enable(&cpu_clk); clk_enable(&main_bus_clk); + clk_enable(&iim_clk); + mx51_revision(); + clk_disable(&iim_clk); + + /* move usb_phy_clk to 24MHz */ + clk_set_parent(&usb_phy1_clk, &osc_clk); + /* set the usboh3_clk parent to pll2_sw_clk */ clk_set_parent(&usboh3_clk, &pll2_sw_clk); @@ -1138,3 +1390,31 @@ int __init mx51_clocks_init(unsigned long ckil, unsigned long osc, MX51_MXC_INT_GPT); return 0; } + +int __init mx53_clocks_init(unsigned long ckil, unsigned long osc, + unsigned long ckih1, unsigned long ckih2) +{ + int i; + + external_low_reference = ckil; + external_high_reference = ckih1; + ckih2_reference = ckih2; + oscillator_reference = osc; + + for (i = 0; i < ARRAY_SIZE(mx53_lookups); i++) + clkdev_add(&mx53_lookups[i]); + + clk_tree_init(); + + clk_enable(&cpu_clk); + clk_enable(&main_bus_clk); + + clk_enable(&iim_clk); + mx53_revision(); + clk_disable(&iim_clk); + + /* System timer */ + mxc_timer_init(&gpt_clk, MX53_IO_ADDRESS(MX53_GPT1_BASE_ADDR), + MX53_INT_GPT); + return 0; +} diff --git a/arch/arm/mach-mx5/cpu.c b/arch/arm/mach-mx5/cpu.c index eaacb6e9b5d..d40671da437 100644 --- a/arch/arm/mach-mx5/cpu.c +++ b/arch/arm/mach-mx5/cpu.c @@ -1,5 +1,5 @@ /* - * Copyright 2008-2009 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2008-2010 Freescale Semiconductor, Inc. All Rights Reserved. * * The code contained herein is licensed under the GNU General Public * License. You may obtain a copy of the GNU General Public License @@ -20,37 +20,18 @@ static int cpu_silicon_rev = -1; -#define SI_REV 0x48 +#define IIM_SREV 0x24 -static void query_silicon_parameter(void) +static int get_mx51_srev(void) { - void __iomem *rom = ioremap(MX51_IROM_BASE_ADDR, MX51_IROM_SIZE); - u32 rev; + void __iomem *iim_base = MX51_IO_ADDRESS(MX51_IIM_BASE_ADDR); + u32 rev = readl(iim_base + IIM_SREV) & 0xff; - if (!rom) { - cpu_silicon_rev = -EINVAL; - return; - } - - rev = readl(rom + SI_REV); - switch (rev) { - case 0x1: - cpu_silicon_rev = MX51_CHIP_REV_1_0; - break; - case 0x2: - cpu_silicon_rev = MX51_CHIP_REV_1_1; - break; - case 0x10: - cpu_silicon_rev = MX51_CHIP_REV_2_0; - break; - case 0x20: - cpu_silicon_rev = MX51_CHIP_REV_3_0; - break; - default: - cpu_silicon_rev = 0; - } - - iounmap(rom); + if (rev == 0x0) + return IMX_CHIP_REVISION_2_0; + else if (rev == 0x10) + return IMX_CHIP_REVISION_3_0; + return 0; } /* @@ -64,7 +45,7 @@ int mx51_revision(void) return -EINVAL; if (cpu_silicon_rev == -1) - query_silicon_parameter(); + cpu_silicon_rev = get_mx51_srev(); return cpu_silicon_rev; } @@ -79,7 +60,10 @@ EXPORT_SYMBOL(mx51_revision); */ static int __init mx51_neon_fixup(void) { - if (mx51_revision() < MX51_CHIP_REV_3_0 && (elf_hwcap & HWCAP_NEON)) { + if (!cpu_is_mx51()) + return 0; + + if (mx51_revision() < IMX_CHIP_REVISION_3_0 && (elf_hwcap & HWCAP_NEON)) { elf_hwcap &= ~HWCAP_NEON; pr_info("Turning off NEON support, detected broken NEON implementation\n"); } @@ -89,29 +73,65 @@ static int __init mx51_neon_fixup(void) late_initcall(mx51_neon_fixup); #endif +static int get_mx53_srev(void) +{ + void __iomem *iim_base = MX51_IO_ADDRESS(MX53_IIM_BASE_ADDR); + u32 rev = readl(iim_base + IIM_SREV) & 0xff; + + if (rev == 0x0) + return IMX_CHIP_REVISION_1_0; + else if (rev == 0x10) + return IMX_CHIP_REVISION_2_0; + return 0; +} + +/* + * Returns: + * the silicon revision of the cpu + * -EINVAL - not a mx53 + */ +int mx53_revision(void) +{ + if (!cpu_is_mx53()) + return -EINVAL; + + if (cpu_silicon_rev == -1) + cpu_silicon_rev = get_mx53_srev(); + + return cpu_silicon_rev; +} +EXPORT_SYMBOL(mx53_revision); + static int __init post_cpu_init(void) { unsigned int reg; void __iomem *base; - if (!cpu_is_mx51()) - return 0; - - base = MX51_IO_ADDRESS(MX51_AIPS1_BASE_ADDR); - __raw_writel(0x0, base + 0x40); - __raw_writel(0x0, base + 0x44); - __raw_writel(0x0, base + 0x48); - __raw_writel(0x0, base + 0x4C); - reg = __raw_readl(base + 0x50) & 0x00FFFFFF; - __raw_writel(reg, base + 0x50); - - base = MX51_IO_ADDRESS(MX51_AIPS2_BASE_ADDR); - __raw_writel(0x0, base + 0x40); - __raw_writel(0x0, base + 0x44); - __raw_writel(0x0, base + 0x48); - __raw_writel(0x0, base + 0x4C); - reg = __raw_readl(base + 0x50) & 0x00FFFFFF; - __raw_writel(reg, base + 0x50); + if (cpu_is_mx51() || cpu_is_mx53()) { + if (cpu_is_mx51()) + base = MX51_IO_ADDRESS(MX51_AIPS1_BASE_ADDR); + else + base = MX53_IO_ADDRESS(MX53_AIPS1_BASE_ADDR); + + __raw_writel(0x0, base + 0x40); + __raw_writel(0x0, base + 0x44); + __raw_writel(0x0, base + 0x48); + __raw_writel(0x0, base + 0x4C); + reg = __raw_readl(base + 0x50) & 0x00FFFFFF; + __raw_writel(reg, base + 0x50); + + if (cpu_is_mx51()) + base = MX51_IO_ADDRESS(MX51_AIPS2_BASE_ADDR); + else + base = MX53_IO_ADDRESS(MX53_AIPS2_BASE_ADDR); + + __raw_writel(0x0, base + 0x40); + __raw_writel(0x0, base + 0x44); + __raw_writel(0x0, base + 0x48); + __raw_writel(0x0, base + 0x4C); + reg = __raw_readl(base + 0x50) & 0x00FFFFFF; + __raw_writel(reg, base + 0x50); + } return 0; } diff --git a/arch/arm/mach-mx5/crm_regs.h b/arch/arm/mach-mx5/crm_regs.h index c776b9af062..b462c22f53d 100644 --- a/arch/arm/mach-mx5/crm_regs.h +++ b/arch/arm/mach-mx5/crm_regs.h @@ -18,6 +18,13 @@ #define MX51_CORTEXA8_BASE MX51_IO_ADDRESS(MX51_ARM_BASE_ADDR) #define MX51_GPC_BASE MX51_IO_ADDRESS(MX51_GPC_BASE_ADDR) +/*MX53*/ +#define MX53_CCM_BASE MX53_IO_ADDRESS(MX53_CCM_BASE_ADDR) +#define MX53_DPLL1_BASE MX53_IO_ADDRESS(MX53_PLL1_BASE_ADDR) +#define MX53_DPLL2_BASE MX53_IO_ADDRESS(MX53_PLL2_BASE_ADDR) +#define MX53_DPLL3_BASE MX53_IO_ADDRESS(MX53_PLL3_BASE_ADDR) +#define MX53_DPLL4_BASE MX53_IO_ADDRESS(MX53_PLL3_BASE_ADDR) + /* PLL Register Offsets */ #define MXC_PLL_DP_CTL 0x00 #define MXC_PLL_DP_CONFIG 0x04 @@ -380,7 +387,8 @@ /* Define the bits in register CLPCR */ #define MXC_CCM_CLPCR_BYPASS_HSC_LPM_HS (0x1 << 23) #define MXC_CCM_CLPCR_BYPASS_SCC_LPM_HS (0x1 << 22) -#define MXC_CCM_CLPCR_BYPASS_MAX_LPM_HS (0x1 << 21) +#define MX51_CCM_CLPCR_BYPASS_MAX_LPM_HS (0x1 << 21) +#define MX53_CCM_CLPCR_BYPASS_MAX_LPM_HS (0x1 << 25) #define MXC_CCM_CLPCR_BYPASS_SDMA_LPM_HS (0x1 << 20) #define MXC_CCM_CLPCR_BYPASS_EMI_LPM_HS (0x1 << 19) #define MXC_CCM_CLPCR_BYPASS_IPU_LPM_HS (0x1 << 18) diff --git a/arch/arm/mach-mx5/devices-imx51.h b/arch/arm/mach-mx5/devices-imx51.h index 8c50cb5d05f..6302e467000 100644 --- a/arch/arm/mach-mx5/devices-imx51.h +++ b/arch/arm/mach-mx5/devices-imx51.h @@ -31,6 +31,11 @@ extern const struct imx_mxc_nand_data imx51_mxc_nand_data __initconst; #define imx51_add_mxc_nand(pdata) \ imx_add_mxc_nand(&imx51_mxc_nand_data, pdata) +extern const struct imx_sdhci_esdhc_imx_data +imx51_sdhci_esdhc_imx_data[] __initconst; +#define imx51_add_sdhci_esdhc_imx(id, pdata) \ + imx_add_sdhci_esdhc_imx(&imx51_sdhci_esdhc_imx_data[id], pdata) + extern const struct imx_spi_imx_data imx51_cspi_data __initconst; #define imx51_add_cspi(pdata) \ imx_add_spi_imx(&imx51_cspi_data, pdata) @@ -39,6 +44,6 @@ extern const struct imx_spi_imx_data imx51_ecspi_data[] __initconst; #define imx51_add_ecspi(id, pdata) \ imx_add_spi_imx(&imx51_ecspi_data[id], pdata) -extern const struct imx_esdhc_imx_data imx51_esdhc_data[] __initconst; -#define imx51_add_esdhc(id, pdata) \ - imx_add_esdhc(&imx51_esdhc_data[id], pdata) +extern const struct imx_imx2_wdt_data imx51_imx2_wdt_data[] __initconst; +#define imx51_add_imx2_wdt(id, pdata) \ + imx_add_imx2_wdt(&imx51_imx2_wdt_data[id]) diff --git a/arch/arm/mach-mx5/devices-imx53.h b/arch/arm/mach-mx5/devices-imx53.h new file mode 100644 index 00000000000..9d0ec2507fa --- /dev/null +++ b/arch/arm/mach-mx5/devices-imx53.h @@ -0,0 +1,13 @@ +/* + * Copyright (C) 2010 Yong Shen. <Yong.Shen@linaro.org> + * + * This program is free software; you can redistribute it and/or modify it under + * the terms of the GNU General Public License version 2 as published by the + * Free Software Foundation. + */ +#include <mach/mx53.h> +#include <mach/devices-common.h> + +extern const struct imx_imx_uart_1irq_data imx53_imx_uart_data[] __initconst; +#define imx53_add_imx_uart(id, pdata) \ + imx_add_imx_uart_1irq(&imx53_imx_uart_data[id], pdata) diff --git a/arch/arm/mach-mx5/devices-mx50.h b/arch/arm/mach-mx5/devices-mx50.h new file mode 100644 index 00000000000..98ab07468a0 --- /dev/null +++ b/arch/arm/mach-mx5/devices-mx50.h @@ -0,0 +1,26 @@ +/* + * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved. + */ + +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + */ + +#include <mach/mx50.h> +#include <mach/devices-common.h> + +extern const struct imx_imx_uart_1irq_data imx50_imx_uart_data[] __initconst; +#define imx50_add_imx_uart(id, pdata) \ + imx_add_imx_uart_1irq(&imx50_imx_uart_data[id], pdata) diff --git a/arch/arm/mach-mx5/devices.c b/arch/arm/mach-mx5/devices.c index 4c7be87a7c9..1bda5cb339d 100644 --- a/arch/arm/mach-mx5/devices.c +++ b/arch/arm/mach-mx5/devices.c @@ -97,19 +97,27 @@ struct platform_device mxc_usbh1_device = { }, }; -static struct resource mxc_wdt_resources[] = { +static struct resource usbh2_resources[] = { { - .start = MX51_WDOG_BASE_ADDR, - .end = MX51_WDOG_BASE_ADDR + SZ_16K - 1, + .start = MX51_OTG_BASE_ADDR + 0x400, + .end = MX51_OTG_BASE_ADDR + 0x400 + 0x1ff, .flags = IORESOURCE_MEM, }, + { + .start = MX51_MXC_INT_USB_H2, + .flags = IORESOURCE_IRQ, + }, }; -struct platform_device mxc_wdt = { - .name = "imx2-wdt", - .id = 0, - .num_resources = ARRAY_SIZE(mxc_wdt_resources), - .resource = mxc_wdt_resources, +struct platform_device mxc_usbh2_device = { + .name = "mxc-ehci", + .id = 2, + .num_resources = ARRAY_SIZE(usbh2_resources), + .resource = usbh2_resources, + .dev = { + .dma_mask = &usb_dma_mask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, }; static struct resource mxc_kpp_resources[] = { @@ -160,9 +168,36 @@ static struct mxc_gpio_port mxc_gpio_ports[] = { .irq_high = MX51_MXC_INT_GPIO4_HIGH, .virtual_irq_start = MXC_GPIO_IRQ_START + 32 * 3 }, + { + .chip.label = "gpio-4", + .base = MX53_IO_ADDRESS(MX53_GPIO5_BASE_ADDR), + .irq = MX53_INT_GPIO5_LOW, + .irq_high = MX53_INT_GPIO5_HIGH, + .virtual_irq_start = MXC_GPIO_IRQ_START + 32 * 4 + }, + { + .chip.label = "gpio-5", + .base = MX53_IO_ADDRESS(MX53_GPIO6_BASE_ADDR), + .irq = MX53_INT_GPIO6_LOW, + .irq_high = MX53_INT_GPIO6_HIGH, + .virtual_irq_start = MXC_GPIO_IRQ_START + 32 * 5 + }, + { + .chip.label = "gpio-6", + .base = MX53_IO_ADDRESS(MX53_GPIO7_BASE_ADDR), + .irq = MX53_INT_GPIO7_LOW, + .irq_high = MX53_INT_GPIO7_HIGH, + .virtual_irq_start = MXC_GPIO_IRQ_START + 32 * 6 + }, }; int __init imx51_register_gpios(void) { + return mxc_gpio_init(mxc_gpio_ports, 4); +} + +int __init imx53_register_gpios(void) +{ return mxc_gpio_init(mxc_gpio_ports, ARRAY_SIZE(mxc_gpio_ports)); } + diff --git a/arch/arm/mach-mx5/devices.h b/arch/arm/mach-mx5/devices.h index af1d07c0bbc..16891aa3573 100644 --- a/arch/arm/mach-mx5/devices.h +++ b/arch/arm/mach-mx5/devices.h @@ -1,6 +1,6 @@ extern struct platform_device mxc_usbdr_host_device; extern struct platform_device mxc_usbh1_device; +extern struct platform_device mxc_usbh2_device; extern struct platform_device mxc_usbdr_udc_device; -extern struct platform_device mxc_wdt; extern struct platform_device mxc_hsi2c_device; extern struct platform_device mxc_keypad_device; diff --git a/arch/arm/mach-mx5/eukrea_mbimx51-baseboard.c b/arch/arm/mach-mx5/eukrea_mbimx51-baseboard.c index a2e6e8c39d2..c96d018ff8a 100644 --- a/arch/arm/mach-mx5/eukrea_mbimx51-baseboard.c +++ b/arch/arm/mach-mx5/eukrea_mbimx51-baseboard.c @@ -33,12 +33,12 @@ #include "devices-imx51.h" #include "devices.h" -#define MBIMX51_TSC2007_GPIO (2*32 + 30) +#define MBIMX51_TSC2007_GPIO IMX_GPIO_NR(3, 30) #define MBIMX51_TSC2007_IRQ (MXC_INTERNAL_IRQS + MBIMX51_TSC2007_GPIO) -#define MBIMX51_LED0 (2*32 + 5) -#define MBIMX51_LED1 (2*32 + 6) -#define MBIMX51_LED2 (2*32 + 7) -#define MBIMX51_LED3 (2*32 + 8) +#define MBIMX51_LED0 IMX_GPIO_NR(3, 5) +#define MBIMX51_LED1 IMX_GPIO_NR(3, 6) +#define MBIMX51_LED2 IMX_GPIO_NR(3, 7) +#define MBIMX51_LED3 IMX_GPIO_NR(3, 8) static struct gpio_led mbimx51_leds[] = { { @@ -84,7 +84,7 @@ static struct platform_device *devices[] __initdata = { &mbimx51_leds_gpio, }; -static struct pad_desc mbimx51_pads[] = { +static iomux_v3_cfg_t mbimx51_pads[] = { /* UART2 */ MX51_PAD_UART2_RXD__UART2_RXD, MX51_PAD_UART2_TXD__UART2_TXD, @@ -96,13 +96,13 @@ static struct pad_desc mbimx51_pads[] = { MX51_PAD_KEY_COL5__UART3_CTS, /* TSC2007 IRQ */ - MX51_PAD_NANDF_D10__GPIO_3_30, + MX51_PAD_NANDF_D10__GPIO3_30, /* LEDS */ - MX51_PAD_DISPB2_SER_DIN__GPIO_3_5, - MX51_PAD_DISPB2_SER_DIO__GPIO_3_6, - MX51_PAD_DISPB2_SER_CLK__GPIO_3_7, - MX51_PAD_DISPB2_SER_RS__GPIO_3_8, + MX51_PAD_DISPB2_SER_DIN__GPIO3_5, + MX51_PAD_DISPB2_SER_DIO__GPIO3_6, + MX51_PAD_DISPB2_SER_CLK__GPIO3_7, + MX51_PAD_DISPB2_SER_RS__GPIO3_8, /* KPP */ MX51_PAD_KEY_ROW0__KEY_ROW0, @@ -217,6 +217,6 @@ void __init eukrea_mbimx51_baseboard_init(void) i2c_register_board_info(1, mbimx51_i2c_devices, ARRAY_SIZE(mbimx51_i2c_devices)); - imx51_add_esdhc(0, NULL); - imx51_add_esdhc(1, NULL); + imx51_add_sdhci_esdhc_imx(0, NULL); + imx51_add_sdhci_esdhc_imx(1, NULL); } diff --git a/arch/arm/mach-mx5/eukrea_mbimxsd-baseboard.c b/arch/arm/mach-mx5/eukrea_mbimxsd-baseboard.c index 2b48f519083..c372a437369 100644 --- a/arch/arm/mach-mx5/eukrea_mbimxsd-baseboard.c +++ b/arch/arm/mach-mx5/eukrea_mbimxsd-baseboard.c @@ -45,14 +45,13 @@ #include "devices-imx51.h" #include "devices.h" -#define MBIMXSD_GPIO_3_31 IOMUX_PAD(0x554, 0x16C, 3, 0x0, 0, \ - MX51_PAD_CTRL_1 | PAD_CTL_PUS_22K_UP) - -static struct pad_desc eukrea_mbimxsd_pads[] = { +static iomux_v3_cfg_t eukrea_mbimxsd_pads[] = { /* LED */ - MX51_PAD_NANDF_D10__GPIO_3_30, + MX51_PAD_NANDF_D10__GPIO3_30, /* SWITCH */ - MBIMXSD_GPIO_3_31, + _MX51_PAD_NANDF_D9__GPIO3_31 | MUX_PAD_CTRL(PAD_CTL_PUS_22K_UP | + PAD_CTL_PKE | PAD_CTL_SRE_FAST | + PAD_CTL_DSE_HIGH | PAD_CTL_PUE | PAD_CTL_HYS), /* UART2 */ MX51_PAD_UART2_RXD__UART2_RXD, MX51_PAD_UART2_TXD__UART2_TXD, @@ -70,8 +69,8 @@ static struct pad_desc eukrea_mbimxsd_pads[] = { MX51_PAD_SD1_DATA3__SD1_DATA3, }; -#define GPIO_LED1 (2 * 32 + 30) -#define GPIO_SWITCH1 (2 * 32 + 31) +#define GPIO_LED1 IMX_GPIO_NR(3, 30) +#define GPIO_SWITCH1 IMX_GPIO_NR(3, 31) static struct gpio_led eukrea_mbimxsd_leds[] = { { @@ -149,7 +148,7 @@ void __init eukrea_mbimxsd51_baseboard_init(void) imx51_add_imx_uart(1, NULL); imx51_add_imx_uart(2, &uart_pdata); - imx51_add_esdhc(0, NULL); + imx51_add_sdhci_esdhc_imx(0, NULL); gpio_request(GPIO_LED1, "LED1"); gpio_direction_output(GPIO_LED1, 1); diff --git a/arch/arm/mach-mx5/mm-mx50.c b/arch/arm/mach-mx5/mm-mx50.c new file mode 100644 index 00000000000..8c6540e5839 --- /dev/null +++ b/arch/arm/mach-mx5/mm-mx50.c @@ -0,0 +1,59 @@ +/* + * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + * + * Create static mapping between physical to virtual memory. + */ + +#include <linux/mm.h> +#include <linux/init.h> + +#include <asm/mach/map.h> + +#include <mach/hardware.h> +#include <mach/common.h> +#include <mach/iomux-v3.h> + +/* + * Define the MX50 memory map. + */ +static struct map_desc mx50_io_desc[] __initdata = { + imx_map_entry(MX50, TZIC, MT_DEVICE), + imx_map_entry(MX50, SPBA0, MT_DEVICE), + imx_map_entry(MX50, AIPS1, MT_DEVICE), + imx_map_entry(MX50, AIPS2, MT_DEVICE), +}; + +/* + * This function initializes the memory map. It is called during the + * system startup to create static physical to virtual memory mappings + * for the IO modules. + */ +void __init mx50_map_io(void) +{ + mxc_set_cpu_type(MXC_CPU_MX50); + mxc_iomux_v3_init(MX50_IO_ADDRESS(MX50_IOMUXC_BASE_ADDR)); + mxc_arch_reset_init(MX50_IO_ADDRESS(MX50_WDOG_BASE_ADDR)); + iotable_init(mx50_io_desc, ARRAY_SIZE(mx50_io_desc)); +} + +int imx50_register_gpios(void); + +void __init mx50_init_irq(void) +{ + tzic_init_irq(MX50_IO_ADDRESS(MX50_TZIC_BASE_ADDR)); + imx50_register_gpios(); +} diff --git a/arch/arm/mach-mx5/mm.c b/arch/arm/mach-mx5/mm.c index bc3f30db8d9..457f9f95204 100644 --- a/arch/arm/mach-mx5/mm.c +++ b/arch/arm/mach-mx5/mm.c @@ -1,5 +1,5 @@ /* - * Copyright 2008-2009 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2008-2010 Freescale Semiconductor, Inc. All Rights Reserved. * * The code contained herein is licensed under the GNU General Public * License. You may obtain a copy of the GNU General Public License @@ -23,33 +23,21 @@ /* * Define the MX51 memory map. */ -static struct map_desc mxc_io_desc[] __initdata = { - { - .virtual = MX51_IRAM_BASE_ADDR_VIRT, - .pfn = __phys_to_pfn(MX51_IRAM_BASE_ADDR), - .length = MX51_IRAM_SIZE, - .type = MT_DEVICE - }, { - .virtual = MX51_DEBUG_BASE_ADDR_VIRT, - .pfn = __phys_to_pfn(MX51_DEBUG_BASE_ADDR), - .length = MX51_DEBUG_SIZE, - .type = MT_DEVICE - }, { - .virtual = MX51_AIPS1_BASE_ADDR_VIRT, - .pfn = __phys_to_pfn(MX51_AIPS1_BASE_ADDR), - .length = MX51_AIPS1_SIZE, - .type = MT_DEVICE - }, { - .virtual = MX51_SPBA0_BASE_ADDR_VIRT, - .pfn = __phys_to_pfn(MX51_SPBA0_BASE_ADDR), - .length = MX51_SPBA0_SIZE, - .type = MT_DEVICE - }, { - .virtual = MX51_AIPS2_BASE_ADDR_VIRT, - .pfn = __phys_to_pfn(MX51_AIPS2_BASE_ADDR), - .length = MX51_AIPS2_SIZE, - .type = MT_DEVICE - }, +static struct map_desc mx51_io_desc[] __initdata = { + imx_map_entry(MX51, IRAM, MT_DEVICE), + imx_map_entry(MX51, DEBUG, MT_DEVICE), + imx_map_entry(MX51, AIPS1, MT_DEVICE), + imx_map_entry(MX51, SPBA0, MT_DEVICE), + imx_map_entry(MX51, AIPS2, MT_DEVICE), +}; + +/* + * Define the MX53 memory map. + */ +static struct map_desc mx53_io_desc[] __initdata = { + imx_map_entry(MX53, AIPS1, MT_DEVICE), + imx_map_entry(MX53, SPBA0, MT_DEVICE), + imx_map_entry(MX53, AIPS2, MT_DEVICE), }; /* @@ -61,8 +49,16 @@ void __init mx51_map_io(void) { mxc_set_cpu_type(MXC_CPU_MX51); mxc_iomux_v3_init(MX51_IO_ADDRESS(MX51_IOMUXC_BASE_ADDR)); - mxc_arch_reset_init(MX51_IO_ADDRESS(MX51_WDOG_BASE_ADDR)); - iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc)); + mxc_arch_reset_init(MX51_IO_ADDRESS(MX51_WDOG1_BASE_ADDR)); + iotable_init(mx51_io_desc, ARRAY_SIZE(mx51_io_desc)); +} + +void __init mx53_map_io(void) +{ + mxc_set_cpu_type(MXC_CPU_MX53); + mxc_iomux_v3_init(MX53_IO_ADDRESS(MX53_IOMUXC_BASE_ADDR)); + mxc_arch_reset_init(MX53_IO_ADDRESS(MX53_WDOG_BASE_ADDR)); + iotable_init(mx53_io_desc, ARRAY_SIZE(mx53_io_desc)); } int imx51_register_gpios(void); @@ -72,7 +68,7 @@ void __init mx51_init_irq(void) unsigned long tzic_addr; void __iomem *tzic_virt; - if (mx51_revision() < MX51_CHIP_REV_2_0) + if (mx51_revision() < IMX_CHIP_REVISION_2_0) tzic_addr = MX51_TZIC_BASE_ADDR_TO1; else tzic_addr = MX51_TZIC_BASE_ADDR; @@ -84,3 +80,20 @@ void __init mx51_init_irq(void) tzic_init_irq(tzic_virt); imx51_register_gpios(); } + +int imx53_register_gpios(void); + +void __init mx53_init_irq(void) +{ + unsigned long tzic_addr; + void __iomem *tzic_virt; + + tzic_addr = MX53_TZIC_BASE_ADDR; + + tzic_virt = ioremap(tzic_addr, SZ_16K); + if (!tzic_virt) + panic("unable to map TZIC interrupt controller\n"); + + tzic_init_irq(tzic_virt); + imx53_register_gpios(); +} diff --git a/arch/arm/mach-mxc91231/mm.c b/arch/arm/mach-mxc91231/mm.c index aeccfd755fe..7652c301da8 100644 --- a/arch/arm/mach-mxc91231/mm.c +++ b/arch/arm/mach-mxc91231/mm.c @@ -27,48 +27,15 @@ /* * This structure defines the MXC memory map. */ -static struct map_desc mxc_io_desc[] __initdata = { - { - .virtual = MXC91231_L2CC_BASE_ADDR_VIRT, - .pfn = __phys_to_pfn(MXC91231_L2CC_BASE_ADDR), - .length = MXC91231_L2CC_SIZE, - .type = MT_DEVICE, - }, { - .virtual = MXC91231_X_MEMC_BASE_ADDR_VIRT, - .pfn = __phys_to_pfn(MXC91231_X_MEMC_BASE_ADDR), - .length = MXC91231_X_MEMC_SIZE, - .type = MT_DEVICE, - }, { - .virtual = MXC91231_ROMP_BASE_ADDR_VIRT, - .pfn = __phys_to_pfn(MXC91231_ROMP_BASE_ADDR), - .length = MXC91231_ROMP_SIZE, - .type = MT_DEVICE, - }, { - .virtual = MXC91231_AVIC_BASE_ADDR_VIRT, - .pfn = __phys_to_pfn(MXC91231_AVIC_BASE_ADDR), - .length = MXC91231_AVIC_SIZE, - .type = MT_DEVICE, - }, { - .virtual = MXC91231_AIPS1_BASE_ADDR_VIRT, - .pfn = __phys_to_pfn(MXC91231_AIPS1_BASE_ADDR), - .length = MXC91231_AIPS1_SIZE, - .type = MT_DEVICE, - }, { - .virtual = MXC91231_SPBA0_BASE_ADDR_VIRT, - .pfn = __phys_to_pfn(MXC91231_SPBA0_BASE_ADDR), - .length = MXC91231_SPBA0_SIZE, - .type = MT_DEVICE, - }, { - .virtual = MXC91231_SPBA1_BASE_ADDR_VIRT, - .pfn = __phys_to_pfn(MXC91231_SPBA1_BASE_ADDR), - .length = MXC91231_SPBA1_SIZE, - .type = MT_DEVICE, - }, { - .virtual = MXC91231_AIPS2_BASE_ADDR_VIRT, - .pfn = __phys_to_pfn(MXC91231_AIPS2_BASE_ADDR), - .length = MXC91231_AIPS2_SIZE, - .type = MT_DEVICE, - }, +static struct map_desc mxc91231_io_desc[] __initdata = { + imx_map_entry(MXC91231, L2CC, MT_DEVICE), + imx_map_entry(MXC91231, X_MEMC, MT_DEVICE), + imx_map_entry(MXC91231, ROMP, MT_DEVICE), + imx_map_entry(MXC91231, AVIC, MT_DEVICE), + imx_map_entry(MXC91231, AIPS1, MT_DEVICE), + imx_map_entry(MXC91231, SPBA0, MT_DEVICE), + imx_map_entry(MXC91231, SPBA1, MT_DEVICE), + imx_map_entry(MXC91231, AIPS2, MT_DEVICE), }; /* @@ -80,7 +47,7 @@ void __init mxc91231_map_io(void) { mxc_set_cpu_type(MXC_CPU_MXC91231); - iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc)); + iotable_init(mxc91231_io_desc, ARRAY_SIZE(mxc91231_io_desc)); } int mxc91231_register_gpios(void); diff --git a/arch/arm/mach-mxs/Kconfig b/arch/arm/mach-mxs/Kconfig new file mode 100644 index 00000000000..c4ac7b41519 --- /dev/null +++ b/arch/arm/mach-mxs/Kconfig @@ -0,0 +1,34 @@ +if ARCH_MXS + +source "arch/arm/mach-mxs/devices/Kconfig" + +config SOC_IMX23 + bool + select CPU_ARM926T + +config SOC_IMX28 + bool + select CPU_ARM926T + +comment "MXS platforms:" + +config MACH_MX23EVK + bool "Support MX23EVK Platform" + select SOC_IMX23 + select MXS_HAVE_PLATFORM_DUART + default y + help + Include support for MX23EVK platform. This includes specific + configurations for the board and its peripherals. + +config MACH_MX28EVK + bool "Support MX28EVK Platform" + select SOC_IMX28 + select MXS_HAVE_PLATFORM_DUART + select MXS_HAVE_PLATFORM_FEC + default y + help + Include support for MX28EVK platform. This includes specific + configurations for the board and its peripherals. + +endif diff --git a/arch/arm/mach-mxs/Makefile b/arch/arm/mach-mxs/Makefile new file mode 100644 index 00000000000..39d3f9c2a84 --- /dev/null +++ b/arch/arm/mach-mxs/Makefile @@ -0,0 +1,10 @@ +# Common support +obj-y := clock.o devices.o gpio.o icoll.o iomux.o system.o timer.o + +obj-$(CONFIG_SOC_IMX23) += clock-mx23.o mm-mx23.o +obj-$(CONFIG_SOC_IMX28) += clock-mx28.o mm-mx28.o + +obj-$(CONFIG_MACH_MX23EVK) += mach-mx23evk.o +obj-$(CONFIG_MACH_MX28EVK) += mach-mx28evk.o + +obj-y += devices/ diff --git a/arch/arm/mach-mxs/Makefile.boot b/arch/arm/mach-mxs/Makefile.boot new file mode 100644 index 00000000000..eb541e0291d --- /dev/null +++ b/arch/arm/mach-mxs/Makefile.boot @@ -0,0 +1 @@ +zreladdr-y := 0x40008000 diff --git a/arch/arm/mach-mxs/clock-mx23.c b/arch/arm/mach-mxs/clock-mx23.c new file mode 100644 index 00000000000..8f5a19ab558 --- /dev/null +++ b/arch/arm/mach-mxs/clock-mx23.c @@ -0,0 +1,526 @@ +/* + * Copyright (C) 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + */ + +#include <linux/mm.h> +#include <linux/delay.h> +#include <linux/clk.h> +#include <linux/io.h> +#include <linux/jiffies.h> + +#include <asm/clkdev.h> +#include <asm/div64.h> + +#include <mach/mx23.h> +#include <mach/common.h> +#include <mach/clock.h> + +#include "regs-clkctrl-mx23.h" + +#define CLKCTRL_BASE_ADDR MX23_IO_ADDRESS(MX23_CLKCTRL_BASE_ADDR) +#define DIGCTRL_BASE_ADDR MX23_IO_ADDRESS(MX23_DIGCTL_BASE_ADDR) + +#define PARENT_RATE_SHIFT 8 + +static int _raw_clk_enable(struct clk *clk) +{ + u32 reg; + + if (clk->enable_reg) { + reg = __raw_readl(clk->enable_reg); + reg &= ~(1 << clk->enable_shift); + __raw_writel(reg, clk->enable_reg); + } + + return 0; +} + +static void _raw_clk_disable(struct clk *clk) +{ + u32 reg; + + if (clk->enable_reg) { + reg = __raw_readl(clk->enable_reg); + reg |= 1 << clk->enable_shift; + __raw_writel(reg, clk->enable_reg); + } +} + +/* + * ref_xtal_clk + */ +static unsigned long ref_xtal_clk_get_rate(struct clk *clk) +{ + return 24000000; +} + +static struct clk ref_xtal_clk = { + .get_rate = ref_xtal_clk_get_rate, +}; + +/* + * pll_clk + */ +static unsigned long pll_clk_get_rate(struct clk *clk) +{ + return 480000000; +} + +static int pll_clk_enable(struct clk *clk) +{ + __raw_writel(BM_CLKCTRL_PLLCTRL0_POWER | + BM_CLKCTRL_PLLCTRL0_EN_USB_CLKS, + CLKCTRL_BASE_ADDR + HW_CLKCTRL_PLLCTRL0_SET); + + /* Only a 10us delay is need. PLLCTRL1 LOCK bitfied is only a timer + * and is incorrect (excessive). Per definition of the PLLCTRL0 + * POWER field, waiting at least 10us. + */ + udelay(10); + + return 0; +} + +static void pll_clk_disable(struct clk *clk) +{ + __raw_writel(BM_CLKCTRL_PLLCTRL0_POWER | + BM_CLKCTRL_PLLCTRL0_EN_USB_CLKS, + CLKCTRL_BASE_ADDR + HW_CLKCTRL_PLLCTRL0_CLR); +} + +static struct clk pll_clk = { + .get_rate = pll_clk_get_rate, + .enable = pll_clk_enable, + .disable = pll_clk_disable, + .parent = &ref_xtal_clk, +}; + +/* + * ref_clk + */ +#define _CLK_GET_RATE_REF(name, sr, ss) \ +static unsigned long name##_get_rate(struct clk *clk) \ +{ \ + unsigned long parent_rate; \ + u32 reg, div; \ + \ + reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_##sr); \ + div = (reg >> BP_CLKCTRL_##sr##_##ss##FRAC) & 0x3f; \ + parent_rate = clk_get_rate(clk->parent); \ + \ + return SH_DIV((parent_rate >> PARENT_RATE_SHIFT) * 18, \ + div, PARENT_RATE_SHIFT); \ +} + +_CLK_GET_RATE_REF(ref_cpu_clk, FRAC, CPU) +_CLK_GET_RATE_REF(ref_emi_clk, FRAC, EMI) +_CLK_GET_RATE_REF(ref_pix_clk, FRAC, PIX) +_CLK_GET_RATE_REF(ref_io_clk, FRAC, IO) + +#define _DEFINE_CLOCK_REF(name, er, es) \ + static struct clk name = { \ + .enable_reg = CLKCTRL_BASE_ADDR + HW_CLKCTRL_##er, \ + .enable_shift = BP_CLKCTRL_##er##_CLKGATE##es, \ + .get_rate = name##_get_rate, \ + .enable = _raw_clk_enable, \ + .disable = _raw_clk_disable, \ + .parent = &pll_clk, \ + } + +_DEFINE_CLOCK_REF(ref_cpu_clk, FRAC, CPU); +_DEFINE_CLOCK_REF(ref_emi_clk, FRAC, EMI); +_DEFINE_CLOCK_REF(ref_pix_clk, FRAC, PIX); +_DEFINE_CLOCK_REF(ref_io_clk, FRAC, IO); + +/* + * General clocks + * + * clk_get_rate + */ +static unsigned long rtc_clk_get_rate(struct clk *clk) +{ + /* ref_xtal_clk is implemented as the only parent */ + return clk_get_rate(clk->parent) / 768; +} + +static unsigned long clk32k_clk_get_rate(struct clk *clk) +{ + return clk->parent->get_rate(clk->parent) / 750; +} + +#define _CLK_GET_RATE(name, rs) \ +static unsigned long name##_get_rate(struct clk *clk) \ +{ \ + u32 reg, div; \ + \ + reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_##rs); \ + \ + if (clk->parent == &ref_xtal_clk) \ + div = (reg & BM_CLKCTRL_##rs##_DIV_XTAL) >> \ + BP_CLKCTRL_##rs##_DIV_XTAL; \ + else \ + div = (reg & BM_CLKCTRL_##rs##_DIV_##rs) >> \ + BP_CLKCTRL_##rs##_DIV_##rs; \ + \ + if (!div) \ + return -EINVAL; \ + \ + return clk_get_rate(clk->parent) / div; \ +} + +_CLK_GET_RATE(cpu_clk, CPU) +_CLK_GET_RATE(emi_clk, EMI) + +#define _CLK_GET_RATE1(name, rs) \ +static unsigned long name##_get_rate(struct clk *clk) \ +{ \ + u32 reg, div; \ + \ + reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_##rs); \ + div = (reg & BM_CLKCTRL_##rs##_DIV) >> BP_CLKCTRL_##rs##_DIV; \ + \ + if (!div) \ + return -EINVAL; \ + \ + return clk_get_rate(clk->parent) / div; \ +} + +_CLK_GET_RATE1(hbus_clk, HBUS) +_CLK_GET_RATE1(xbus_clk, XBUS) +_CLK_GET_RATE1(ssp_clk, SSP) +_CLK_GET_RATE1(gpmi_clk, GPMI) +_CLK_GET_RATE1(lcdif_clk, PIX) + +#define _CLK_GET_RATE_STUB(name) \ +static unsigned long name##_get_rate(struct clk *clk) \ +{ \ + return clk_get_rate(clk->parent); \ +} + +_CLK_GET_RATE_STUB(uart_clk) +_CLK_GET_RATE_STUB(audio_clk) +_CLK_GET_RATE_STUB(pwm_clk) + +/* + * clk_set_rate + */ +static int cpu_clk_set_rate(struct clk *clk, unsigned long rate) +{ + u32 reg, bm_busy, div_max, d, f, div, frac; + unsigned long diff, parent_rate, calc_rate; + int i; + + parent_rate = clk_get_rate(clk->parent); + + if (clk->parent == &ref_xtal_clk) { + div_max = BM_CLKCTRL_CPU_DIV_XTAL >> BP_CLKCTRL_CPU_DIV_XTAL; + bm_busy = BM_CLKCTRL_CPU_BUSY_REF_XTAL; + div = DIV_ROUND_UP(parent_rate, rate); + if (div == 0 || div > div_max) + return -EINVAL; + } else { + div_max = BM_CLKCTRL_CPU_DIV_CPU >> BP_CLKCTRL_CPU_DIV_CPU; + bm_busy = BM_CLKCTRL_CPU_BUSY_REF_CPU; + rate >>= PARENT_RATE_SHIFT; + parent_rate >>= PARENT_RATE_SHIFT; + diff = parent_rate; + div = frac = 1; + for (d = 1; d <= div_max; d++) { + f = parent_rate * 18 / d / rate; + if ((parent_rate * 18 / d) % rate) + f++; + if (f < 18 || f > 35) + continue; + + calc_rate = parent_rate * 18 / f / d; + if (calc_rate > rate) + continue; + + if (rate - calc_rate < diff) { + frac = f; + div = d; + diff = rate - calc_rate; + } + + if (diff == 0) + break; + } + + if (diff == parent_rate) + return -EINVAL; + + reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_FRAC); + reg &= ~BM_CLKCTRL_FRAC_CPUFRAC; + reg |= frac; + __raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_FRAC); + } + + reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_CPU); + reg &= ~BM_CLKCTRL_CPU_DIV_CPU; + reg |= div << BP_CLKCTRL_CPU_DIV_CPU; + __raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_CPU); + + for (i = 10000; i; i--) + if (!(__raw_readl(CLKCTRL_BASE_ADDR + + HW_CLKCTRL_CPU) & bm_busy)) + break; + if (!i) { + pr_err("%s: divider writing timeout\n", __func__); + return -ETIMEDOUT; + } + + return 0; +} + +#define _CLK_SET_RATE(name, dr) \ +static int name##_set_rate(struct clk *clk, unsigned long rate) \ +{ \ + u32 reg, div_max, div; \ + unsigned long parent_rate; \ + int i; \ + \ + parent_rate = clk_get_rate(clk->parent); \ + div_max = BM_CLKCTRL_##dr##_DIV >> BP_CLKCTRL_##dr##_DIV; \ + \ + div = DIV_ROUND_UP(parent_rate, rate); \ + if (div == 0 || div > div_max) \ + return -EINVAL; \ + \ + reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_##dr); \ + reg &= ~BM_CLKCTRL_##dr##_DIV; \ + reg |= div << BP_CLKCTRL_##dr##_DIV; \ + if (reg | (1 << clk->enable_shift)) { \ + pr_err("%s: clock is gated\n", __func__); \ + return -EINVAL; \ + } \ + __raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_##dr); \ + \ + for (i = 10000; i; i--) \ + if (!(__raw_readl(CLKCTRL_BASE_ADDR + \ + HW_CLKCTRL_##dr) & BM_CLKCTRL_##dr##_BUSY)) \ + break; \ + if (!i) { \ + pr_err("%s: divider writing timeout\n", __func__); \ + return -ETIMEDOUT; \ + } \ + \ + return 0; \ +} + +_CLK_SET_RATE(xbus_clk, XBUS) +_CLK_SET_RATE(ssp_clk, SSP) +_CLK_SET_RATE(gpmi_clk, GPMI) +_CLK_SET_RATE(lcdif_clk, PIX) + +#define _CLK_SET_RATE_STUB(name) \ +static int name##_set_rate(struct clk *clk, unsigned long rate) \ +{ \ + return -EINVAL; \ +} + +_CLK_SET_RATE_STUB(emi_clk) +_CLK_SET_RATE_STUB(uart_clk) +_CLK_SET_RATE_STUB(audio_clk) +_CLK_SET_RATE_STUB(pwm_clk) +_CLK_SET_RATE_STUB(clk32k_clk) + +/* + * clk_set_parent + */ +#define _CLK_SET_PARENT(name, bit) \ +static int name##_set_parent(struct clk *clk, struct clk *parent) \ +{ \ + if (parent != clk->parent) { \ + __raw_writel(BM_CLKCTRL_CLKSEQ_BYPASS_##bit, \ + HW_CLKCTRL_CLKSEQ_TOG); \ + clk->parent = parent; \ + } \ + \ + return 0; \ +} + +_CLK_SET_PARENT(cpu_clk, CPU) +_CLK_SET_PARENT(emi_clk, EMI) +_CLK_SET_PARENT(ssp_clk, SSP) +_CLK_SET_PARENT(gpmi_clk, GPMI) +_CLK_SET_PARENT(lcdif_clk, PIX) + +#define _CLK_SET_PARENT_STUB(name) \ +static int name##_set_parent(struct clk *clk, struct clk *parent) \ +{ \ + if (parent != clk->parent) \ + return -EINVAL; \ + else \ + return 0; \ +} + +_CLK_SET_PARENT_STUB(uart_clk) +_CLK_SET_PARENT_STUB(audio_clk) +_CLK_SET_PARENT_STUB(pwm_clk) +_CLK_SET_PARENT_STUB(clk32k_clk) + +/* + * clk definition + */ +static struct clk cpu_clk = { + .get_rate = cpu_clk_get_rate, + .set_rate = cpu_clk_set_rate, + .set_parent = cpu_clk_set_parent, + .parent = &ref_cpu_clk, +}; + +static struct clk hbus_clk = { + .get_rate = hbus_clk_get_rate, + .parent = &cpu_clk, +}; + +static struct clk xbus_clk = { + .get_rate = xbus_clk_get_rate, + .set_rate = xbus_clk_set_rate, + .parent = &ref_xtal_clk, +}; + +static struct clk rtc_clk = { + .get_rate = rtc_clk_get_rate, + .parent = &ref_xtal_clk, +}; + +/* usb_clk gate is controlled in DIGCTRL other than CLKCTRL */ +static struct clk usb_clk = { + .enable_reg = DIGCTRL_BASE_ADDR, + .enable_shift = 2, + .enable = _raw_clk_enable, + .disable = _raw_clk_disable, + .parent = &pll_clk, +}; + +#define _DEFINE_CLOCK(name, er, es, p) \ + static struct clk name = { \ + .enable_reg = CLKCTRL_BASE_ADDR + HW_CLKCTRL_##er, \ + .enable_shift = BP_CLKCTRL_##er##_##es, \ + .get_rate = name##_get_rate, \ + .set_rate = name##_set_rate, \ + .set_parent = name##_set_parent, \ + .enable = _raw_clk_enable, \ + .disable = _raw_clk_disable, \ + .parent = p, \ + } + +_DEFINE_CLOCK(emi_clk, EMI, CLKGATE, &ref_xtal_clk); +_DEFINE_CLOCK(ssp_clk, SSP, CLKGATE, &ref_xtal_clk); +_DEFINE_CLOCK(gpmi_clk, GPMI, CLKGATE, &ref_xtal_clk); +_DEFINE_CLOCK(lcdif_clk, PIX, CLKGATE, &ref_xtal_clk); +_DEFINE_CLOCK(uart_clk, XTAL, UART_CLK_GATE, &ref_xtal_clk); +_DEFINE_CLOCK(audio_clk, XTAL, FILT_CLK24M_GATE, &ref_xtal_clk); +_DEFINE_CLOCK(pwm_clk, XTAL, PWM_CLK24M_GATE, &ref_xtal_clk); +_DEFINE_CLOCK(clk32k_clk, XTAL, TIMROT_CLK32K_GATE, &ref_xtal_clk); + +#define _REGISTER_CLOCK(d, n, c) \ + { \ + .dev_id = d, \ + .con_id = n, \ + .clk = &c, \ + }, + +static struct clk_lookup lookups[] = { + _REGISTER_CLOCK("mxs-duart.0", NULL, uart_clk) + _REGISTER_CLOCK("rtc", NULL, rtc_clk) + _REGISTER_CLOCK(NULL, "hclk", hbus_clk) + _REGISTER_CLOCK(NULL, "xclk", xbus_clk) + _REGISTER_CLOCK(NULL, "usb", usb_clk) + _REGISTER_CLOCK(NULL, "audio", audio_clk) + _REGISTER_CLOCK(NULL, "pwm", pwm_clk) +}; + +static int clk_misc_init(void) +{ + u32 reg; + int i; + + /* Fix up parent per register setting */ + reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_CLKSEQ); + cpu_clk.parent = (reg & BM_CLKCTRL_CLKSEQ_BYPASS_CPU) ? + &ref_xtal_clk : &ref_cpu_clk; + emi_clk.parent = (reg & BM_CLKCTRL_CLKSEQ_BYPASS_EMI) ? + &ref_xtal_clk : &ref_emi_clk; + ssp_clk.parent = (reg & BM_CLKCTRL_CLKSEQ_BYPASS_SSP) ? + &ref_xtal_clk : &ref_io_clk; + gpmi_clk.parent = (reg & BM_CLKCTRL_CLKSEQ_BYPASS_GPMI) ? + &ref_xtal_clk : &ref_io_clk; + lcdif_clk.parent = (reg & BM_CLKCTRL_CLKSEQ_BYPASS_PIX) ? + &ref_xtal_clk : &ref_pix_clk; + + /* Use int div over frac when both are available */ + __raw_writel(BM_CLKCTRL_CPU_DIV_XTAL_FRAC_EN, + CLKCTRL_BASE_ADDR + HW_CLKCTRL_CPU_CLR); + __raw_writel(BM_CLKCTRL_CPU_DIV_CPU_FRAC_EN, + CLKCTRL_BASE_ADDR + HW_CLKCTRL_CPU_CLR); + __raw_writel(BM_CLKCTRL_HBUS_DIV_FRAC_EN, + CLKCTRL_BASE_ADDR + HW_CLKCTRL_HBUS_CLR); + + reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_XBUS); + reg &= ~BM_CLKCTRL_XBUS_DIV_FRAC_EN; + __raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_XBUS); + + reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_SSP); + reg &= ~BM_CLKCTRL_SSP_DIV_FRAC_EN; + __raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_SSP); + + reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_GPMI); + reg &= ~BM_CLKCTRL_GPMI_DIV_FRAC_EN; + __raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_GPMI); + + reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_PIX); + reg &= ~BM_CLKCTRL_PIX_DIV_FRAC_EN; + __raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_PIX); + + /* + * Set safe hbus clock divider. A divider of 3 ensure that + * the Vddd voltage required for the cpu clock is sufficiently + * high for the hbus clock. + */ + reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_HBUS); + reg &= BM_CLKCTRL_HBUS_DIV; + reg |= 3 << BP_CLKCTRL_HBUS_DIV; + __raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_HBUS); + + for (i = 10000; i; i--) + if (!(__raw_readl(CLKCTRL_BASE_ADDR + + HW_CLKCTRL_HBUS) & BM_CLKCTRL_HBUS_BUSY)) + break; + if (!i) { + pr_err("%s: divider writing timeout\n", __func__); + return -ETIMEDOUT; + } + + /* Gate off cpu clock in WFI for power saving */ + __raw_writel(BM_CLKCTRL_CPU_INTERRUPT_WAIT, + CLKCTRL_BASE_ADDR + HW_CLKCTRL_CPU_SET); + + return 0; +} + +int __init mx23_clocks_init(void) +{ + clk_misc_init(); + + clkdev_add_table(lookups, ARRAY_SIZE(lookups)); + + mxs_timer_init(&clk32k_clk, MX23_INT_TIMER0); + + return 0; +} diff --git a/arch/arm/mach-mxs/clock-mx28.c b/arch/arm/mach-mxs/clock-mx28.c new file mode 100644 index 00000000000..74e2103c601 --- /dev/null +++ b/arch/arm/mach-mxs/clock-mx28.c @@ -0,0 +1,734 @@ +/* + * Copyright (C) 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + */ + +#include <linux/mm.h> +#include <linux/delay.h> +#include <linux/clk.h> +#include <linux/io.h> +#include <linux/jiffies.h> + +#include <asm/clkdev.h> +#include <asm/div64.h> + +#include <mach/mx28.h> +#include <mach/common.h> +#include <mach/clock.h> + +#include "regs-clkctrl-mx28.h" + +#define CLKCTRL_BASE_ADDR MX28_IO_ADDRESS(MX28_CLKCTRL_BASE_ADDR) +#define DIGCTRL_BASE_ADDR MX28_IO_ADDRESS(MX28_DIGCTL_BASE_ADDR) + +#define PARENT_RATE_SHIFT 8 + +static struct clk pll2_clk; +static struct clk cpu_clk; +static struct clk emi_clk; +static struct clk saif0_clk; +static struct clk saif1_clk; +static struct clk clk32k_clk; + +static int _raw_clk_enable(struct clk *clk) +{ + u32 reg; + + if (clk->enable_reg) { + reg = __raw_readl(clk->enable_reg); + reg &= ~(1 << clk->enable_shift); + __raw_writel(reg, clk->enable_reg); + } + + return 0; +} + +static void _raw_clk_disable(struct clk *clk) +{ + u32 reg; + + if (clk->enable_reg) { + reg = __raw_readl(clk->enable_reg); + reg |= 1 << clk->enable_shift; + __raw_writel(reg, clk->enable_reg); + } +} + +/* + * ref_xtal_clk + */ +static unsigned long ref_xtal_clk_get_rate(struct clk *clk) +{ + return 24000000; +} + +static struct clk ref_xtal_clk = { + .get_rate = ref_xtal_clk_get_rate, +}; + +/* + * pll_clk + */ +static unsigned long pll0_clk_get_rate(struct clk *clk) +{ + return 480000000; +} + +static unsigned long pll1_clk_get_rate(struct clk *clk) +{ + return 480000000; +} + +static unsigned long pll2_clk_get_rate(struct clk *clk) +{ + return 50000000; +} + +#define _CLK_ENABLE_PLL(name, r, g) \ +static int name##_enable(struct clk *clk) \ +{ \ + __raw_writel(BM_CLKCTRL_##r##CTRL0_POWER, \ + CLKCTRL_BASE_ADDR + HW_CLKCTRL_##r##CTRL0_SET); \ + udelay(10); \ + \ + if (clk == &pll2_clk) \ + __raw_writel(BM_CLKCTRL_##r##CTRL0_##g, \ + CLKCTRL_BASE_ADDR + HW_CLKCTRL_##r##CTRL0_CLR); \ + else \ + __raw_writel(BM_CLKCTRL_##r##CTRL0_##g, \ + CLKCTRL_BASE_ADDR + HW_CLKCTRL_##r##CTRL0_SET); \ + \ + return 0; \ +} + +_CLK_ENABLE_PLL(pll0_clk, PLL0, EN_USB_CLKS) +_CLK_ENABLE_PLL(pll1_clk, PLL1, EN_USB_CLKS) +_CLK_ENABLE_PLL(pll2_clk, PLL2, CLKGATE) + +#define _CLK_DISABLE_PLL(name, r, g) \ +static void name##_disable(struct clk *clk) \ +{ \ + __raw_writel(BM_CLKCTRL_##r##CTRL0_POWER, \ + CLKCTRL_BASE_ADDR + HW_CLKCTRL_##r##CTRL0_CLR); \ + \ + if (clk == &pll2_clk) \ + __raw_writel(BM_CLKCTRL_##r##CTRL0_##g, \ + CLKCTRL_BASE_ADDR + HW_CLKCTRL_##r##CTRL0_SET); \ + else \ + __raw_writel(BM_CLKCTRL_##r##CTRL0_##g, \ + CLKCTRL_BASE_ADDR + HW_CLKCTRL_##r##CTRL0_CLR); \ + \ +} + +_CLK_DISABLE_PLL(pll0_clk, PLL0, EN_USB_CLKS) +_CLK_DISABLE_PLL(pll1_clk, PLL1, EN_USB_CLKS) +_CLK_DISABLE_PLL(pll2_clk, PLL2, CLKGATE) + +#define _DEFINE_CLOCK_PLL(name) \ + static struct clk name = { \ + .get_rate = name##_get_rate, \ + .enable = name##_enable, \ + .disable = name##_disable, \ + .parent = &ref_xtal_clk, \ + } + +_DEFINE_CLOCK_PLL(pll0_clk); +_DEFINE_CLOCK_PLL(pll1_clk); +_DEFINE_CLOCK_PLL(pll2_clk); + +/* + * ref_clk + */ +#define _CLK_GET_RATE_REF(name, sr, ss) \ +static unsigned long name##_get_rate(struct clk *clk) \ +{ \ + unsigned long parent_rate; \ + u32 reg, div; \ + \ + reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_##sr); \ + div = (reg >> BP_CLKCTRL_##sr##_##ss##FRAC) & 0x3f; \ + parent_rate = clk_get_rate(clk->parent); \ + \ + return SH_DIV((parent_rate >> PARENT_RATE_SHIFT) * 18, \ + div, PARENT_RATE_SHIFT); \ +} + +_CLK_GET_RATE_REF(ref_cpu_clk, FRAC0, CPU) +_CLK_GET_RATE_REF(ref_emi_clk, FRAC0, EMI) +_CLK_GET_RATE_REF(ref_io0_clk, FRAC0, IO0) +_CLK_GET_RATE_REF(ref_io1_clk, FRAC0, IO1) +_CLK_GET_RATE_REF(ref_pix_clk, FRAC1, PIX) +_CLK_GET_RATE_REF(ref_gpmi_clk, FRAC1, GPMI) + +#define _DEFINE_CLOCK_REF(name, er, es) \ + static struct clk name = { \ + .enable_reg = CLKCTRL_BASE_ADDR + HW_CLKCTRL_##er, \ + .enable_shift = BP_CLKCTRL_##er##_CLKGATE##es, \ + .get_rate = name##_get_rate, \ + .enable = _raw_clk_enable, \ + .disable = _raw_clk_disable, \ + .parent = &pll0_clk, \ + } + +_DEFINE_CLOCK_REF(ref_cpu_clk, FRAC0, CPU); +_DEFINE_CLOCK_REF(ref_emi_clk, FRAC0, EMI); +_DEFINE_CLOCK_REF(ref_io0_clk, FRAC0, IO0); +_DEFINE_CLOCK_REF(ref_io1_clk, FRAC0, IO1); +_DEFINE_CLOCK_REF(ref_pix_clk, FRAC1, PIX); +_DEFINE_CLOCK_REF(ref_gpmi_clk, FRAC1, GPMI); + +/* + * General clocks + * + * clk_get_rate + */ +static unsigned long lradc_clk_get_rate(struct clk *clk) +{ + return clk_get_rate(clk->parent) / 16; +} + +static unsigned long rtc_clk_get_rate(struct clk *clk) +{ + /* ref_xtal_clk is implemented as the only parent */ + return clk_get_rate(clk->parent) / 768; +} + +static unsigned long clk32k_clk_get_rate(struct clk *clk) +{ + return clk->parent->get_rate(clk->parent) / 750; +} + +static unsigned long spdif_clk_get_rate(struct clk *clk) +{ + return clk_get_rate(clk->parent) / 4; +} + +#define _CLK_GET_RATE(name, rs) \ +static unsigned long name##_get_rate(struct clk *clk) \ +{ \ + u32 reg, div; \ + \ + reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_##rs); \ + \ + if (clk->parent == &ref_xtal_clk) \ + div = (reg & BM_CLKCTRL_##rs##_DIV_XTAL) >> \ + BP_CLKCTRL_##rs##_DIV_XTAL; \ + else \ + div = (reg & BM_CLKCTRL_##rs##_DIV_##rs) >> \ + BP_CLKCTRL_##rs##_DIV_##rs; \ + \ + if (!div) \ + return -EINVAL; \ + \ + return clk_get_rate(clk->parent) / div; \ +} + +_CLK_GET_RATE(cpu_clk, CPU) +_CLK_GET_RATE(emi_clk, EMI) + +#define _CLK_GET_RATE1(name, rs) \ +static unsigned long name##_get_rate(struct clk *clk) \ +{ \ + u32 reg, div; \ + \ + reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_##rs); \ + div = (reg & BM_CLKCTRL_##rs##_DIV) >> BP_CLKCTRL_##rs##_DIV; \ + \ + if (!div) \ + return -EINVAL; \ + \ + if (clk == &saif0_clk || clk == &saif1_clk) \ + return clk_get_rate(clk->parent) >> 16 * div; \ + else \ + return clk_get_rate(clk->parent) / div; \ +} + +_CLK_GET_RATE1(hbus_clk, HBUS) +_CLK_GET_RATE1(xbus_clk, XBUS) +_CLK_GET_RATE1(ssp0_clk, SSP0) +_CLK_GET_RATE1(ssp1_clk, SSP1) +_CLK_GET_RATE1(ssp2_clk, SSP2) +_CLK_GET_RATE1(ssp3_clk, SSP3) +_CLK_GET_RATE1(gpmi_clk, GPMI) +_CLK_GET_RATE1(lcdif_clk, DIS_LCDIF) +_CLK_GET_RATE1(saif0_clk, SAIF0) +_CLK_GET_RATE1(saif1_clk, SAIF1) + +#define _CLK_GET_RATE_STUB(name) \ +static unsigned long name##_get_rate(struct clk *clk) \ +{ \ + return clk_get_rate(clk->parent); \ +} + +_CLK_GET_RATE_STUB(uart_clk) +_CLK_GET_RATE_STUB(pwm_clk) +_CLK_GET_RATE_STUB(can0_clk) +_CLK_GET_RATE_STUB(can1_clk) +_CLK_GET_RATE_STUB(fec_clk) + +/* + * clk_set_rate + */ +/* fool compiler */ +#define BM_CLKCTRL_CPU_DIV 0 +#define BP_CLKCTRL_CPU_DIV 0 +#define BM_CLKCTRL_CPU_BUSY 0 + +#define _CLK_SET_RATE(name, dr, fr, fs) \ +static int name##_set_rate(struct clk *clk, unsigned long rate) \ +{ \ + u32 reg, bm_busy, div_max, d, f, div, frac; \ + unsigned long diff, parent_rate, calc_rate; \ + int i; \ + \ + parent_rate = clk_get_rate(clk->parent); \ + div_max = BM_CLKCTRL_##dr##_DIV >> BP_CLKCTRL_##dr##_DIV; \ + bm_busy = BM_CLKCTRL_##dr##_BUSY; \ + \ + if (clk->parent == &ref_xtal_clk) { \ + div = DIV_ROUND_UP(parent_rate, rate); \ + if (clk == &cpu_clk) { \ + div_max = BM_CLKCTRL_CPU_DIV_XTAL >> \ + BP_CLKCTRL_CPU_DIV_XTAL; \ + bm_busy = BM_CLKCTRL_CPU_BUSY_REF_XTAL; \ + } \ + if (div == 0 || div > div_max) \ + return -EINVAL; \ + } else { \ + rate >>= PARENT_RATE_SHIFT; \ + parent_rate >>= PARENT_RATE_SHIFT; \ + diff = parent_rate; \ + div = frac = 1; \ + if (clk == &cpu_clk) { \ + div_max = BM_CLKCTRL_CPU_DIV_CPU >> \ + BP_CLKCTRL_CPU_DIV_CPU; \ + bm_busy = BM_CLKCTRL_CPU_BUSY_REF_CPU; \ + } \ + for (d = 1; d <= div_max; d++) { \ + f = parent_rate * 18 / d / rate; \ + if ((parent_rate * 18 / d) % rate) \ + f++; \ + if (f < 18 || f > 35) \ + continue; \ + \ + calc_rate = parent_rate * 18 / f / d; \ + if (calc_rate > rate) \ + continue; \ + \ + if (rate - calc_rate < diff) { \ + frac = f; \ + div = d; \ + diff = rate - calc_rate; \ + } \ + \ + if (diff == 0) \ + break; \ + } \ + \ + if (diff == parent_rate) \ + return -EINVAL; \ + \ + reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_##fr); \ + reg &= ~BM_CLKCTRL_##fr##_##fs##FRAC; \ + reg |= frac; \ + __raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_##fr); \ + } \ + \ + reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_##dr); \ + if (clk == &cpu_clk) { \ + reg &= ~BM_CLKCTRL_CPU_DIV_CPU; \ + reg |= div << BP_CLKCTRL_CPU_DIV_CPU; \ + } else { \ + reg &= ~BM_CLKCTRL_##dr##_DIV; \ + reg |= div << BP_CLKCTRL_##dr##_DIV; \ + if (reg | (1 << clk->enable_shift)) { \ + pr_err("%s: clock is gated\n", __func__); \ + return -EINVAL; \ + } \ + } \ + __raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_CPU); \ + \ + for (i = 10000; i; i--) \ + if (!(__raw_readl(CLKCTRL_BASE_ADDR + \ + HW_CLKCTRL_##dr) & bm_busy)) \ + break; \ + if (!i) { \ + pr_err("%s: divider writing timeout\n", __func__); \ + return -ETIMEDOUT; \ + } \ + \ + return 0; \ +} + +_CLK_SET_RATE(cpu_clk, CPU, FRAC0, CPU) +_CLK_SET_RATE(ssp0_clk, SSP0, FRAC0, IO0) +_CLK_SET_RATE(ssp1_clk, SSP1, FRAC0, IO0) +_CLK_SET_RATE(ssp2_clk, SSP2, FRAC0, IO1) +_CLK_SET_RATE(ssp3_clk, SSP3, FRAC0, IO1) +_CLK_SET_RATE(lcdif_clk, DIS_LCDIF, FRAC1, PIX) +_CLK_SET_RATE(gpmi_clk, GPMI, FRAC1, GPMI) + +#define _CLK_SET_RATE1(name, dr) \ +static int name##_set_rate(struct clk *clk, unsigned long rate) \ +{ \ + u32 reg, div_max, div; \ + unsigned long parent_rate; \ + int i; \ + \ + parent_rate = clk_get_rate(clk->parent); \ + div_max = BM_CLKCTRL_##dr##_DIV >> BP_CLKCTRL_##dr##_DIV; \ + \ + div = DIV_ROUND_UP(parent_rate, rate); \ + if (div == 0 || div > div_max) \ + return -EINVAL; \ + \ + reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_##dr); \ + reg &= ~BM_CLKCTRL_##dr##_DIV; \ + reg |= div << BP_CLKCTRL_##dr##_DIV; \ + if (reg | (1 << clk->enable_shift)) { \ + pr_err("%s: clock is gated\n", __func__); \ + return -EINVAL; \ + } \ + __raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_##dr); \ + \ + for (i = 10000; i; i--) \ + if (!(__raw_readl(CLKCTRL_BASE_ADDR + \ + HW_CLKCTRL_##dr) & BM_CLKCTRL_##dr##_BUSY)) \ + break; \ + if (!i) { \ + pr_err("%s: divider writing timeout\n", __func__); \ + return -ETIMEDOUT; \ + } \ + \ + return 0; \ +} + +_CLK_SET_RATE1(xbus_clk, XBUS) + +/* saif clock uses 16 bits frac div */ +#define _CLK_SET_RATE_SAIF(name, rs) \ +static int name##_set_rate(struct clk *clk, unsigned long rate) \ +{ \ + u16 div; \ + u32 reg; \ + u64 lrate; \ + unsigned long parent_rate; \ + int i; \ + \ + parent_rate = clk_get_rate(clk->parent); \ + if (rate > parent_rate) \ + return -EINVAL; \ + \ + lrate = (u64)rate << 16; \ + do_div(lrate, parent_rate); \ + div = (u16)lrate; \ + \ + if (!div) \ + return -EINVAL; \ + \ + reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_##rs); \ + reg &= ~BM_CLKCTRL_##rs##_DIV; \ + reg |= div << BP_CLKCTRL_##rs##_DIV; \ + __raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_##rs); \ + \ + for (i = 10000; i; i--) \ + if (!(__raw_readl(CLKCTRL_BASE_ADDR + \ + HW_CLKCTRL_##rs) & BM_CLKCTRL_##rs##_BUSY)) \ + break; \ + if (!i) { \ + pr_err("%s: divider writing timeout\n", __func__); \ + return -ETIMEDOUT; \ + } \ + \ + return 0; \ +} + +_CLK_SET_RATE_SAIF(saif0_clk, SAIF0) +_CLK_SET_RATE_SAIF(saif1_clk, SAIF1) + +#define _CLK_SET_RATE_STUB(name) \ +static int name##_set_rate(struct clk *clk, unsigned long rate) \ +{ \ + return -EINVAL; \ +} + +_CLK_SET_RATE_STUB(emi_clk) +_CLK_SET_RATE_STUB(uart_clk) +_CLK_SET_RATE_STUB(pwm_clk) +_CLK_SET_RATE_STUB(spdif_clk) +_CLK_SET_RATE_STUB(clk32k_clk) +_CLK_SET_RATE_STUB(can0_clk) +_CLK_SET_RATE_STUB(can1_clk) +_CLK_SET_RATE_STUB(fec_clk) + +/* + * clk_set_parent + */ +#define _CLK_SET_PARENT(name, bit) \ +static int name##_set_parent(struct clk *clk, struct clk *parent) \ +{ \ + if (parent != clk->parent) { \ + __raw_writel(BM_CLKCTRL_CLKSEQ_BYPASS_##bit, \ + HW_CLKCTRL_CLKSEQ_TOG); \ + clk->parent = parent; \ + } \ + \ + return 0; \ +} + +_CLK_SET_PARENT(cpu_clk, CPU) +_CLK_SET_PARENT(emi_clk, EMI) +_CLK_SET_PARENT(ssp0_clk, SSP0) +_CLK_SET_PARENT(ssp1_clk, SSP1) +_CLK_SET_PARENT(ssp2_clk, SSP2) +_CLK_SET_PARENT(ssp3_clk, SSP3) +_CLK_SET_PARENT(lcdif_clk, DIS_LCDIF) +_CLK_SET_PARENT(gpmi_clk, GPMI) +_CLK_SET_PARENT(saif0_clk, SAIF0) +_CLK_SET_PARENT(saif1_clk, SAIF1) + +#define _CLK_SET_PARENT_STUB(name) \ +static int name##_set_parent(struct clk *clk, struct clk *parent) \ +{ \ + if (parent != clk->parent) \ + return -EINVAL; \ + else \ + return 0; \ +} + +_CLK_SET_PARENT_STUB(pwm_clk) +_CLK_SET_PARENT_STUB(uart_clk) +_CLK_SET_PARENT_STUB(clk32k_clk) +_CLK_SET_PARENT_STUB(spdif_clk) +_CLK_SET_PARENT_STUB(fec_clk) +_CLK_SET_PARENT_STUB(can0_clk) +_CLK_SET_PARENT_STUB(can1_clk) + +/* + * clk definition + */ +static struct clk cpu_clk = { + .get_rate = cpu_clk_get_rate, + .set_rate = cpu_clk_set_rate, + .set_parent = cpu_clk_set_parent, + .parent = &ref_cpu_clk, +}; + +static struct clk hbus_clk = { + .get_rate = hbus_clk_get_rate, + .parent = &cpu_clk, +}; + +static struct clk xbus_clk = { + .get_rate = xbus_clk_get_rate, + .set_rate = xbus_clk_set_rate, + .parent = &ref_xtal_clk, +}; + +static struct clk lradc_clk = { + .get_rate = lradc_clk_get_rate, + .parent = &clk32k_clk, +}; + +static struct clk rtc_clk = { + .get_rate = rtc_clk_get_rate, + .parent = &ref_xtal_clk, +}; + +/* usb_clk gate is controlled in DIGCTRL other than CLKCTRL */ +static struct clk usb0_clk = { + .enable_reg = DIGCTRL_BASE_ADDR, + .enable_shift = 2, + .enable = _raw_clk_enable, + .disable = _raw_clk_disable, + .parent = &pll0_clk, +}; + +static struct clk usb1_clk = { + .enable_reg = DIGCTRL_BASE_ADDR, + .enable_shift = 16, + .enable = _raw_clk_enable, + .disable = _raw_clk_disable, + .parent = &pll1_clk, +}; + +#define _DEFINE_CLOCK(name, er, es, p) \ + static struct clk name = { \ + .enable_reg = CLKCTRL_BASE_ADDR + HW_CLKCTRL_##er, \ + .enable_shift = BP_CLKCTRL_##er##_##es, \ + .get_rate = name##_get_rate, \ + .set_rate = name##_set_rate, \ + .set_parent = name##_set_parent, \ + .enable = _raw_clk_enable, \ + .disable = _raw_clk_disable, \ + .parent = p, \ + } + +_DEFINE_CLOCK(emi_clk, EMI, CLKGATE, &ref_xtal_clk); +_DEFINE_CLOCK(ssp0_clk, SSP0, CLKGATE, &ref_xtal_clk); +_DEFINE_CLOCK(ssp1_clk, SSP1, CLKGATE, &ref_xtal_clk); +_DEFINE_CLOCK(ssp2_clk, SSP2, CLKGATE, &ref_xtal_clk); +_DEFINE_CLOCK(ssp3_clk, SSP3, CLKGATE, &ref_xtal_clk); +_DEFINE_CLOCK(lcdif_clk, DIS_LCDIF, CLKGATE, &ref_xtal_clk); +_DEFINE_CLOCK(gpmi_clk, GPMI, CLKGATE, &ref_xtal_clk); +_DEFINE_CLOCK(saif0_clk, SAIF0, CLKGATE, &ref_xtal_clk); +_DEFINE_CLOCK(saif1_clk, SAIF1, CLKGATE, &ref_xtal_clk); +_DEFINE_CLOCK(can0_clk, FLEXCAN, STOP_CAN0, &ref_xtal_clk); +_DEFINE_CLOCK(can1_clk, FLEXCAN, STOP_CAN1, &ref_xtal_clk); +_DEFINE_CLOCK(pwm_clk, XTAL, PWM_CLK24M_GATE, &ref_xtal_clk); +_DEFINE_CLOCK(uart_clk, XTAL, UART_CLK_GATE, &ref_xtal_clk); +_DEFINE_CLOCK(clk32k_clk, XTAL, TIMROT_CLK32K_GATE, &ref_xtal_clk); +_DEFINE_CLOCK(spdif_clk, SPDIF, CLKGATE, &pll0_clk); +_DEFINE_CLOCK(fec_clk, ENET, DISABLE, &hbus_clk); + +#define _REGISTER_CLOCK(d, n, c) \ + { \ + .dev_id = d, \ + .con_id = n, \ + .clk = &c, \ + }, + +static struct clk_lookup lookups[] = { + _REGISTER_CLOCK("mxs-duart.0", NULL, uart_clk) + _REGISTER_CLOCK("fec.0", NULL, fec_clk) + _REGISTER_CLOCK("rtc", NULL, rtc_clk) + _REGISTER_CLOCK("pll2", NULL, pll2_clk) + _REGISTER_CLOCK(NULL, "hclk", hbus_clk) + _REGISTER_CLOCK(NULL, "xclk", xbus_clk) + _REGISTER_CLOCK(NULL, "can0", can0_clk) + _REGISTER_CLOCK(NULL, "can1", can1_clk) + _REGISTER_CLOCK(NULL, "usb0", usb0_clk) + _REGISTER_CLOCK(NULL, "usb1", usb1_clk) + _REGISTER_CLOCK(NULL, "pwm", pwm_clk) + _REGISTER_CLOCK(NULL, "lradc", lradc_clk) + _REGISTER_CLOCK(NULL, "spdif", spdif_clk) +}; + +static int clk_misc_init(void) +{ + u32 reg; + int i; + + /* Fix up parent per register setting */ + reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_CLKSEQ); + cpu_clk.parent = (reg & BM_CLKCTRL_CLKSEQ_BYPASS_CPU) ? + &ref_xtal_clk : &ref_cpu_clk; + emi_clk.parent = (reg & BM_CLKCTRL_CLKSEQ_BYPASS_EMI) ? + &ref_xtal_clk : &ref_emi_clk; + ssp0_clk.parent = (reg & BM_CLKCTRL_CLKSEQ_BYPASS_SSP0) ? + &ref_xtal_clk : &ref_io0_clk; + ssp1_clk.parent = (reg & BM_CLKCTRL_CLKSEQ_BYPASS_SSP1) ? + &ref_xtal_clk : &ref_io0_clk; + ssp2_clk.parent = (reg & BM_CLKCTRL_CLKSEQ_BYPASS_SSP2) ? + &ref_xtal_clk : &ref_io1_clk; + ssp3_clk.parent = (reg & BM_CLKCTRL_CLKSEQ_BYPASS_SSP3) ? + &ref_xtal_clk : &ref_io1_clk; + lcdif_clk.parent = (reg & BM_CLKCTRL_CLKSEQ_BYPASS_DIS_LCDIF) ? + &ref_xtal_clk : &ref_pix_clk; + gpmi_clk.parent = (reg & BM_CLKCTRL_CLKSEQ_BYPASS_GPMI) ? + &ref_xtal_clk : &ref_gpmi_clk; + saif0_clk.parent = (reg & BM_CLKCTRL_CLKSEQ_BYPASS_SAIF0) ? + &ref_xtal_clk : &pll0_clk; + saif1_clk.parent = (reg & BM_CLKCTRL_CLKSEQ_BYPASS_SAIF1) ? + &ref_xtal_clk : &pll0_clk; + + /* Use int div over frac when both are available */ + __raw_writel(BM_CLKCTRL_CPU_DIV_XTAL_FRAC_EN, + CLKCTRL_BASE_ADDR + HW_CLKCTRL_CPU_CLR); + __raw_writel(BM_CLKCTRL_CPU_DIV_CPU_FRAC_EN, + CLKCTRL_BASE_ADDR + HW_CLKCTRL_CPU_CLR); + __raw_writel(BM_CLKCTRL_HBUS_DIV_FRAC_EN, + CLKCTRL_BASE_ADDR + HW_CLKCTRL_HBUS_CLR); + + reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_XBUS); + reg &= ~BM_CLKCTRL_XBUS_DIV_FRAC_EN; + __raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_XBUS); + + reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_SSP0); + reg &= ~BM_CLKCTRL_SSP0_DIV_FRAC_EN; + __raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_SSP0); + + reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_SSP1); + reg &= ~BM_CLKCTRL_SSP1_DIV_FRAC_EN; + __raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_SSP1); + + reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_SSP2); + reg &= ~BM_CLKCTRL_SSP2_DIV_FRAC_EN; + __raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_SSP2); + + reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_SSP3); + reg &= ~BM_CLKCTRL_SSP3_DIV_FRAC_EN; + __raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_SSP3); + + reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_GPMI); + reg &= ~BM_CLKCTRL_GPMI_DIV_FRAC_EN; + __raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_GPMI); + + reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_DIS_LCDIF); + reg &= ~BM_CLKCTRL_DIS_LCDIF_DIV_FRAC_EN; + __raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_DIS_LCDIF); + + /* SAIF has to use frac div for functional operation */ + reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_SAIF0); + reg &= ~BM_CLKCTRL_SAIF0_DIV_FRAC_EN; + __raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_SAIF0); + + reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_SAIF1); + reg &= ~BM_CLKCTRL_SAIF1_DIV_FRAC_EN; + __raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_SAIF1); + + /* + * Set safe hbus clock divider. A divider of 3 ensure that + * the Vddd voltage required for the cpu clock is sufficiently + * high for the hbus clock. + */ + reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_HBUS); + reg &= BM_CLKCTRL_HBUS_DIV; + reg |= 3 << BP_CLKCTRL_HBUS_DIV; + __raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_HBUS); + + for (i = 10000; i; i--) + if (!(__raw_readl(CLKCTRL_BASE_ADDR + + HW_CLKCTRL_HBUS) & BM_CLKCTRL_HBUS_ASM_BUSY)) + break; + if (!i) { + pr_err("%s: divider writing timeout\n", __func__); + return -ETIMEDOUT; + } + + /* Gate off cpu clock in WFI for power saving */ + __raw_writel(BM_CLKCTRL_CPU_INTERRUPT_WAIT, + CLKCTRL_BASE_ADDR + HW_CLKCTRL_CPU_SET); + + /* Extra fec clock setting */ + reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_ENET); + reg &= ~BM_CLKCTRL_ENET_SLEEP; + reg |= BM_CLKCTRL_ENET_CLK_OUT_EN; + __raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_ENET); + + return 0; +} + +int __init mx28_clocks_init(void) +{ + clk_misc_init(); + + clkdev_add_table(lookups, ARRAY_SIZE(lookups)); + + mxs_timer_init(&clk32k_clk, MX28_INT_TIMER0); + + return 0; +} diff --git a/arch/arm/mach-mxs/clock.c b/arch/arm/mach-mxs/clock.c new file mode 100644 index 00000000000..e7d2269cf70 --- /dev/null +++ b/arch/arm/mach-mxs/clock.c @@ -0,0 +1,200 @@ +/* + * Based on arch/arm/plat-omap/clock.c + * + * Copyright (C) 2004 - 2005 Nokia corporation + * Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com> + * Modified for omap shared clock framework by Tony Lindgren <tony@atomide.com> + * Copyright 2007 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2008 Juergen Beisert, kernel@pengutronix.de + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ + +/* #define DEBUG */ + +#include <linux/clk.h> +#include <linux/err.h> +#include <linux/errno.h> +#include <linux/init.h> +#include <linux/io.h> +#include <linux/kernel.h> +#include <linux/list.h> +#include <linux/module.h> +#include <linux/mutex.h> +#include <linux/platform_device.h> +#include <linux/proc_fs.h> +#include <linux/semaphore.h> +#include <linux/string.h> + +#include <mach/clock.h> + +static LIST_HEAD(clocks); +static DEFINE_MUTEX(clocks_mutex); + +/*------------------------------------------------------------------------- + * Standard clock functions defined in include/linux/clk.h + *-------------------------------------------------------------------------*/ + +static void __clk_disable(struct clk *clk) +{ + if (clk == NULL || IS_ERR(clk)) + return; + WARN_ON(!clk->usecount); + + if (!(--clk->usecount)) { + if (clk->disable) + clk->disable(clk); + __clk_disable(clk->parent); + __clk_disable(clk->secondary); + } +} + +static int __clk_enable(struct clk *clk) +{ + if (clk == NULL || IS_ERR(clk)) + return -EINVAL; + + if (clk->usecount++ == 0) { + __clk_enable(clk->parent); + __clk_enable(clk->secondary); + + if (clk->enable) + clk->enable(clk); + } + return 0; +} + +/* This function increments the reference count on the clock and enables the + * clock if not already enabled. The parent clock tree is recursively enabled + */ +int clk_enable(struct clk *clk) +{ + int ret = 0; + + if (clk == NULL || IS_ERR(clk)) + return -EINVAL; + + mutex_lock(&clocks_mutex); + ret = __clk_enable(clk); + mutex_unlock(&clocks_mutex); + + return ret; +} +EXPORT_SYMBOL(clk_enable); + +/* This function decrements the reference count on the clock and disables + * the clock when reference count is 0. The parent clock tree is + * recursively disabled + */ +void clk_disable(struct clk *clk) +{ + if (clk == NULL || IS_ERR(clk)) + return; + + mutex_lock(&clocks_mutex); + __clk_disable(clk); + mutex_unlock(&clocks_mutex); +} +EXPORT_SYMBOL(clk_disable); + +/* Retrieve the *current* clock rate. If the clock itself + * does not provide a special calculation routine, ask + * its parent and so on, until one is able to return + * a valid clock rate + */ +unsigned long clk_get_rate(struct clk *clk) +{ + if (clk == NULL || IS_ERR(clk)) + return 0UL; + + if (clk->get_rate) + return clk->get_rate(clk); + + return clk_get_rate(clk->parent); +} +EXPORT_SYMBOL(clk_get_rate); + +/* Round the requested clock rate to the nearest supported + * rate that is less than or equal to the requested rate. + * This is dependent on the clock's current parent. + */ +long clk_round_rate(struct clk *clk, unsigned long rate) +{ + if (clk == NULL || IS_ERR(clk) || !clk->round_rate) + return 0; + + return clk->round_rate(clk, rate); +} +EXPORT_SYMBOL(clk_round_rate); + +/* Set the clock to the requested clock rate. The rate must + * match a supported rate exactly based on what clk_round_rate returns + */ +int clk_set_rate(struct clk *clk, unsigned long rate) +{ + int ret = -EINVAL; + + if (clk == NULL || IS_ERR(clk) || clk->set_rate == NULL || rate == 0) + return ret; + + mutex_lock(&clocks_mutex); + ret = clk->set_rate(clk, rate); + mutex_unlock(&clocks_mutex); + + return ret; +} +EXPORT_SYMBOL(clk_set_rate); + +/* Set the clock's parent to another clock source */ +int clk_set_parent(struct clk *clk, struct clk *parent) +{ + int ret = -EINVAL; + struct clk *old; + + if (clk == NULL || IS_ERR(clk) || parent == NULL || + IS_ERR(parent) || clk->set_parent == NULL) + return ret; + + if (clk->usecount) + clk_enable(parent); + + mutex_lock(&clocks_mutex); + ret = clk->set_parent(clk, parent); + if (ret == 0) { + old = clk->parent; + clk->parent = parent; + } else { + old = parent; + } + mutex_unlock(&clocks_mutex); + + if (clk->usecount) + clk_disable(old); + + return ret; +} +EXPORT_SYMBOL(clk_set_parent); + +/* Retrieve the clock's parent clock source */ +struct clk *clk_get_parent(struct clk *clk) +{ + struct clk *ret = NULL; + + if (clk == NULL || IS_ERR(clk)) + return ret; + + return clk->parent; +} +EXPORT_SYMBOL(clk_get_parent); diff --git a/arch/arm/mach-mxs/devices-mx23.h b/arch/arm/mach-mxs/devices-mx23.h new file mode 100644 index 00000000000..d0f49fc0abb --- /dev/null +++ b/arch/arm/mach-mxs/devices-mx23.h @@ -0,0 +1,16 @@ +/* + * Copyright (C) 2010 Pengutronix + * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de> + * + * Copyright 2010 Freescale Semiconductor, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify it under + * the terms of the GNU General Public License version 2 as published by the + * Free Software Foundation. + */ +#include <mach/mx23.h> +#include <mach/devices-common.h> + +extern const struct mxs_duart_data mx23_duart_data __initconst; +#define mx23_add_duart() \ + mxs_add_duart(&mx23_duart_data) diff --git a/arch/arm/mach-mxs/devices-mx28.h b/arch/arm/mach-mxs/devices-mx28.h new file mode 100644 index 00000000000..00b736c434b --- /dev/null +++ b/arch/arm/mach-mxs/devices-mx28.h @@ -0,0 +1,20 @@ +/* + * Copyright (C) 2010 Pengutronix + * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de> + * + * Copyright 2010 Freescale Semiconductor, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify it under + * the terms of the GNU General Public License version 2 as published by the + * Free Software Foundation. + */ +#include <mach/mx28.h> +#include <mach/devices-common.h> + +extern const struct mxs_duart_data mx28_duart_data __initconst; +#define mx28_add_duart() \ + mxs_add_duart(&mx28_duart_data) + +extern const struct mxs_fec_data mx28_fec_data[] __initconst; +#define mx28_add_fec(id, pdata) \ + mxs_add_fec(&mx28_fec_data[id], pdata) diff --git a/arch/arm/mach-mxs/devices.c b/arch/arm/mach-mxs/devices.c new file mode 100644 index 00000000000..6b60f02ca2e --- /dev/null +++ b/arch/arm/mach-mxs/devices.c @@ -0,0 +1,75 @@ +/* + * Copyright 2008 Sascha Hauer, kernel@pengutronix.de + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, + * Boston, MA 02110-1301, USA. + */ + +#include <linux/kernel.h> +#include <linux/slab.h> +#include <linux/init.h> +#include <linux/err.h> +#include <linux/platform_device.h> +#include <mach/common.h> + +struct platform_device *__init mxs_add_platform_device_dmamask( + const char *name, int id, + const struct resource *res, unsigned int num_resources, + const void *data, size_t size_data, u64 dmamask) +{ + int ret = -ENOMEM; + struct platform_device *pdev; + + pdev = platform_device_alloc(name, id); + if (!pdev) + goto err; + + if (dmamask) { + /* + * This memory isn't freed when the device is put, + * I don't have a nice idea for that though. Conceptually + * dma_mask in struct device should not be a pointer. + * See http://thread.gmane.org/gmane.linux.kernel.pci/9081 + */ + pdev->dev.dma_mask = + kmalloc(sizeof(*pdev->dev.dma_mask), GFP_KERNEL); + if (!pdev->dev.dma_mask) + /* ret is still -ENOMEM; */ + goto err; + + *pdev->dev.dma_mask = dmamask; + pdev->dev.coherent_dma_mask = dmamask; + } + + if (res) { + ret = platform_device_add_resources(pdev, res, num_resources); + if (ret) + goto err; + } + + if (data) { + ret = platform_device_add_data(pdev, data, size_data); + if (ret) + goto err; + } + + ret = platform_device_add(pdev); + if (ret) { +err: + platform_device_put(pdev); + return ERR_PTR(ret); + } + + return pdev; +} diff --git a/arch/arm/mach-mxs/devices/Kconfig b/arch/arm/mach-mxs/devices/Kconfig new file mode 100644 index 00000000000..a35a2dc5539 --- /dev/null +++ b/arch/arm/mach-mxs/devices/Kconfig @@ -0,0 +1,5 @@ +config MXS_HAVE_PLATFORM_DUART + bool + +config MXS_HAVE_PLATFORM_FEC + bool diff --git a/arch/arm/mach-mxs/devices/Makefile b/arch/arm/mach-mxs/devices/Makefile new file mode 100644 index 00000000000..4b5266a3e6d --- /dev/null +++ b/arch/arm/mach-mxs/devices/Makefile @@ -0,0 +1,2 @@ +obj-$(CONFIG_MXS_HAVE_PLATFORM_DUART) += platform-duart.o +obj-$(CONFIG_MXS_HAVE_PLATFORM_FEC) += platform-fec.o diff --git a/arch/arm/mach-mxs/devices/platform-duart.c b/arch/arm/mach-mxs/devices/platform-duart.c new file mode 100644 index 00000000000..2fe0df5b0aa --- /dev/null +++ b/arch/arm/mach-mxs/devices/platform-duart.c @@ -0,0 +1,48 @@ +/* + * Copyright (C) 2009-2010 Pengutronix + * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de> + * + * Copyright 2010 Freescale Semiconductor, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify it under + * the terms of the GNU General Public License version 2 as published by the + * Free Software Foundation. + */ +#include <mach/mx23.h> +#include <mach/mx28.h> +#include <mach/devices-common.h> + +#define mxs_duart_data_entry(soc) \ + { \ + .iobase = soc ## _DUART_BASE_ADDR, \ + .irq = soc ## _INT_DUART, \ + } + +#ifdef CONFIG_SOC_IMX23 +const struct mxs_duart_data mx23_duart_data __initconst = + mxs_duart_data_entry(MX23); +#endif + +#ifdef CONFIG_SOC_IMX28 +const struct mxs_duart_data mx28_duart_data __initconst = + mxs_duart_data_entry(MX28); +#endif + +struct platform_device *__init mxs_add_duart( + const struct mxs_duart_data *data) +{ + struct resource res[] = { + { + .start = data->iobase, + .end = data->iobase + SZ_8K - 1, + .flags = IORESOURCE_MEM, + }, { + .start = data->irq, + .end = data->irq, + .flags = IORESOURCE_IRQ, + }, + }; + + return mxs_add_platform_device("mxs-duart", 0, res, ARRAY_SIZE(res), + NULL, 0); +} diff --git a/arch/arm/mach-mxs/devices/platform-fec.c b/arch/arm/mach-mxs/devices/platform-fec.c new file mode 100644 index 00000000000..c08168cf3de --- /dev/null +++ b/arch/arm/mach-mxs/devices/platform-fec.c @@ -0,0 +1,50 @@ +/* + * Copyright (C) 2010 Pengutronix + * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de> + * + * This program is free software; you can redistribute it and/or modify it under + * the terms of the GNU General Public License version 2 as published by the + * Free Software Foundation. + */ +#include <asm/sizes.h> +#include <mach/mx28.h> +#include <mach/devices-common.h> + +#define mxs_fec_data_entry_single(soc, _id) \ + { \ + .id = _id, \ + .iobase = soc ## _ENET_MAC ## _id ## _BASE_ADDR, \ + .irq = soc ## _INT_ENET_MAC ## _id, \ + } + +#define mxs_fec_data_entry(soc, _id) \ + [_id] = mxs_fec_data_entry_single(soc, _id) + +#ifdef CONFIG_SOC_IMX28 +const struct mxs_fec_data mx28_fec_data[] __initconst = { +#define mx28_fec_data_entry(_id) \ + mxs_fec_data_entry(MX28, _id) + mx28_fec_data_entry(0), + mx28_fec_data_entry(1), +}; +#endif + +struct platform_device *__init mxs_add_fec( + const struct mxs_fec_data *data, + const struct fec_platform_data *pdata) +{ + struct resource res[] = { + { + .start = data->iobase, + .end = data->iobase + SZ_16K - 1, + .flags = IORESOURCE_MEM, + }, { + .start = data->irq, + .end = data->irq, + .flags = IORESOURCE_IRQ, + }, + }; + + return mxs_add_platform_device("fec", data->id, + res, ARRAY_SIZE(res), pdata, sizeof(*pdata)); +} diff --git a/arch/arm/mach-mxs/gpio.c b/arch/arm/mach-mxs/gpio.c new file mode 100644 index 00000000000..d7ad7a61366 --- /dev/null +++ b/arch/arm/mach-mxs/gpio.c @@ -0,0 +1,325 @@ +/* + * MXC GPIO support. (c) 2008 Daniel Mack <daniel@caiaq.de> + * Copyright 2008 Juergen Beisert, kernel@pengutronix.de + * + * Based on code from Freescale, + * Copyright (C) 2004-2010 Freescale Semiconductor, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ + +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/irq.h> +#include <linux/gpio.h> +#include <mach/mx23.h> +#include <mach/mx28.h> +#include <asm-generic/bug.h> + +#include "gpio.h" + +static struct mxs_gpio_port *mxs_gpio_ports; +static int gpio_table_size; + +#define PINCTRL_DOUT(n) ((cpu_is_mx23() ? 0x0500 : 0x0700) + (n) * 0x10) +#define PINCTRL_DIN(n) ((cpu_is_mx23() ? 0x0600 : 0x0900) + (n) * 0x10) +#define PINCTRL_DOE(n) ((cpu_is_mx23() ? 0x0700 : 0x0b00) + (n) * 0x10) +#define PINCTRL_PIN2IRQ(n) ((cpu_is_mx23() ? 0x0800 : 0x1000) + (n) * 0x10) +#define PINCTRL_IRQEN(n) ((cpu_is_mx23() ? 0x0900 : 0x1100) + (n) * 0x10) +#define PINCTRL_IRQLEV(n) ((cpu_is_mx23() ? 0x0a00 : 0x1200) + (n) * 0x10) +#define PINCTRL_IRQPOL(n) ((cpu_is_mx23() ? 0x0b00 : 0x1300) + (n) * 0x10) +#define PINCTRL_IRQSTAT(n) ((cpu_is_mx23() ? 0x0c00 : 0x1400) + (n) * 0x10) + +#define GPIO_INT_FALL_EDGE 0x0 +#define GPIO_INT_LOW_LEV 0x1 +#define GPIO_INT_RISE_EDGE 0x2 +#define GPIO_INT_HIGH_LEV 0x3 +#define GPIO_INT_LEV_MASK (1 << 0) +#define GPIO_INT_POL_MASK (1 << 1) + +/* Note: This driver assumes 32 GPIOs are handled in one register */ + +static void clear_gpio_irqstatus(struct mxs_gpio_port *port, u32 index) +{ + __mxs_clrl(1 << index, port->base + PINCTRL_IRQSTAT(port->id)); +} + +static void set_gpio_irqenable(struct mxs_gpio_port *port, u32 index, + int enable) +{ + if (enable) { + __mxs_setl(1 << index, port->base + PINCTRL_IRQEN(port->id)); + __mxs_setl(1 << index, port->base + PINCTRL_PIN2IRQ(port->id)); + } else { + __mxs_clrl(1 << index, port->base + PINCTRL_IRQEN(port->id)); + } +} + +static void mxs_gpio_ack_irq(u32 irq) +{ + u32 gpio = irq_to_gpio(irq); + clear_gpio_irqstatus(&mxs_gpio_ports[gpio / 32], gpio & 0x1f); +} + +static void mxs_gpio_mask_irq(u32 irq) +{ + u32 gpio = irq_to_gpio(irq); + set_gpio_irqenable(&mxs_gpio_ports[gpio / 32], gpio & 0x1f, 0); +} + +static void mxs_gpio_unmask_irq(u32 irq) +{ + u32 gpio = irq_to_gpio(irq); + set_gpio_irqenable(&mxs_gpio_ports[gpio / 32], gpio & 0x1f, 1); +} + +static int mxs_gpio_get(struct gpio_chip *chip, unsigned offset); + +static int mxs_gpio_set_irq_type(u32 irq, u32 type) +{ + u32 gpio = irq_to_gpio(irq); + u32 pin_mask = 1 << (gpio & 31); + struct mxs_gpio_port *port = &mxs_gpio_ports[gpio / 32]; + void __iomem *pin_addr; + int edge; + + switch (type) { + case IRQ_TYPE_EDGE_RISING: + edge = GPIO_INT_RISE_EDGE; + break; + case IRQ_TYPE_EDGE_FALLING: + edge = GPIO_INT_FALL_EDGE; + break; + case IRQ_TYPE_LEVEL_LOW: + edge = GPIO_INT_LOW_LEV; + break; + case IRQ_TYPE_LEVEL_HIGH: + edge = GPIO_INT_HIGH_LEV; + break; + default: + return -EINVAL; + } + + /* set level or edge */ + pin_addr = port->base + PINCTRL_IRQLEV(port->id); + if (edge & GPIO_INT_LEV_MASK) + __mxs_setl(pin_mask, pin_addr); + else + __mxs_clrl(pin_mask, pin_addr); + + /* set polarity */ + pin_addr = port->base + PINCTRL_IRQPOL(port->id); + if (edge & GPIO_INT_POL_MASK) + __mxs_setl(pin_mask, pin_addr); + else + __mxs_clrl(pin_mask, pin_addr); + + clear_gpio_irqstatus(port, gpio & 0x1f); + + return 0; +} + +/* MXS has one interrupt *per* gpio port */ +static void mxs_gpio_irq_handler(u32 irq, struct irq_desc *desc) +{ + u32 irq_stat; + struct mxs_gpio_port *port = (struct mxs_gpio_port *)get_irq_data(irq); + u32 gpio_irq_no_base = port->virtual_irq_start; + + irq_stat = __raw_readl(port->base + PINCTRL_IRQSTAT(port->id)) & + __raw_readl(port->base + PINCTRL_IRQEN(port->id)); + + while (irq_stat != 0) { + int irqoffset = fls(irq_stat) - 1; + generic_handle_irq(gpio_irq_no_base + irqoffset); + irq_stat &= ~(1 << irqoffset); + } +} + +/* + * Set interrupt number "irq" in the GPIO as a wake-up source. + * While system is running, all registered GPIO interrupts need to have + * wake-up enabled. When system is suspended, only selected GPIO interrupts + * need to have wake-up enabled. + * @param irq interrupt source number + * @param enable enable as wake-up if equal to non-zero + * @return This function returns 0 on success. + */ +static int mxs_gpio_set_wake_irq(u32 irq, u32 enable) +{ + u32 gpio = irq_to_gpio(irq); + u32 gpio_idx = gpio & 0x1f; + struct mxs_gpio_port *port = &mxs_gpio_ports[gpio / 32]; + + if (enable) { + if (port->irq_high && (gpio_idx >= 16)) + enable_irq_wake(port->irq_high); + else + enable_irq_wake(port->irq); + } else { + if (port->irq_high && (gpio_idx >= 16)) + disable_irq_wake(port->irq_high); + else + disable_irq_wake(port->irq); + } + + return 0; +} + +static struct irq_chip gpio_irq_chip = { + .ack = mxs_gpio_ack_irq, + .mask = mxs_gpio_mask_irq, + .unmask = mxs_gpio_unmask_irq, + .set_type = mxs_gpio_set_irq_type, + .set_wake = mxs_gpio_set_wake_irq, +}; + +static void mxs_set_gpio_direction(struct gpio_chip *chip, unsigned offset, + int dir) +{ + struct mxs_gpio_port *port = + container_of(chip, struct mxs_gpio_port, chip); + void __iomem *pin_addr = port->base + PINCTRL_DOE(port->id); + + if (dir) + __mxs_setl(1 << offset, pin_addr); + else + __mxs_clrl(1 << offset, pin_addr); +} + +static int mxs_gpio_get(struct gpio_chip *chip, unsigned offset) +{ + struct mxs_gpio_port *port = + container_of(chip, struct mxs_gpio_port, chip); + + return (__raw_readl(port->base + PINCTRL_DIN(port->id)) >> offset) & 1; +} + +static void mxs_gpio_set(struct gpio_chip *chip, unsigned offset, int value) +{ + struct mxs_gpio_port *port = + container_of(chip, struct mxs_gpio_port, chip); + void __iomem *pin_addr = port->base + PINCTRL_DOUT(port->id); + + if (value) + __mxs_setl(1 << offset, pin_addr); + else + __mxs_clrl(1 << offset, pin_addr); +} + +static int mxs_gpio_to_irq(struct gpio_chip *chip, unsigned offset) +{ + struct mxs_gpio_port *port = + container_of(chip, struct mxs_gpio_port, chip); + + return port->virtual_irq_start + offset; +} + +static int mxs_gpio_direction_input(struct gpio_chip *chip, unsigned offset) +{ + mxs_set_gpio_direction(chip, offset, 0); + return 0; +} + +static int mxs_gpio_direction_output(struct gpio_chip *chip, + unsigned offset, int value) +{ + mxs_gpio_set(chip, offset, value); + mxs_set_gpio_direction(chip, offset, 1); + return 0; +} + +int __init mxs_gpio_init(struct mxs_gpio_port *port, int cnt) +{ + int i, j; + + /* save for local usage */ + mxs_gpio_ports = port; + gpio_table_size = cnt; + + pr_info("MXS GPIO hardware\n"); + + for (i = 0; i < cnt; i++) { + /* disable the interrupt and clear the status */ + __raw_writel(0, port[i].base + PINCTRL_PIN2IRQ(i)); + __raw_writel(0, port[i].base + PINCTRL_IRQEN(i)); + + /* clear address has to be used to clear IRQSTAT bits */ + __mxs_clrl(~0U, port[i].base + PINCTRL_IRQSTAT(i)); + + for (j = port[i].virtual_irq_start; + j < port[i].virtual_irq_start + 32; j++) { + set_irq_chip(j, &gpio_irq_chip); + set_irq_handler(j, handle_level_irq); + set_irq_flags(j, IRQF_VALID); + } + + /* setup one handler for each entry */ + set_irq_chained_handler(port[i].irq, mxs_gpio_irq_handler); + set_irq_data(port[i].irq, &port[i]); + + /* register gpio chip */ + port[i].chip.direction_input = mxs_gpio_direction_input; + port[i].chip.direction_output = mxs_gpio_direction_output; + port[i].chip.get = mxs_gpio_get; + port[i].chip.set = mxs_gpio_set; + port[i].chip.to_irq = mxs_gpio_to_irq; + port[i].chip.base = i * 32; + port[i].chip.ngpio = 32; + + /* its a serious configuration bug when it fails */ + BUG_ON(gpiochip_add(&port[i].chip) < 0); + } + + return 0; +} + +#define DEFINE_MXS_GPIO_PORT(soc, _id) \ + { \ + .chip.label = "gpio-" #_id, \ + .id = _id, \ + .irq = soc ## _INT_GPIO ## _id, \ + .base = soc ## _IO_ADDRESS( \ + soc ## _PINCTRL ## _BASE_ADDR), \ + .virtual_irq_start = MXS_GPIO_IRQ_START + (_id) * 32, \ + } + +#define DEFINE_REGISTER_FUNCTION(prefix) \ +int __init prefix ## _register_gpios(void) \ +{ \ + return mxs_gpio_init(prefix ## _gpio_ports, \ + ARRAY_SIZE(prefix ## _gpio_ports)); \ +} + +#ifdef CONFIG_SOC_IMX23 +static struct mxs_gpio_port mx23_gpio_ports[] = { + DEFINE_MXS_GPIO_PORT(MX23, 0), + DEFINE_MXS_GPIO_PORT(MX23, 1), + DEFINE_MXS_GPIO_PORT(MX23, 2), +}; +DEFINE_REGISTER_FUNCTION(mx23) +#endif + +#ifdef CONFIG_SOC_IMX28 +static struct mxs_gpio_port mx28_gpio_ports[] = { + DEFINE_MXS_GPIO_PORT(MX28, 0), + DEFINE_MXS_GPIO_PORT(MX28, 1), + DEFINE_MXS_GPIO_PORT(MX28, 2), + DEFINE_MXS_GPIO_PORT(MX28, 3), + DEFINE_MXS_GPIO_PORT(MX28, 4), +}; +DEFINE_REGISTER_FUNCTION(mx28) +#endif diff --git a/arch/arm/mach-mxs/gpio.h b/arch/arm/mach-mxs/gpio.h new file mode 100644 index 00000000000..005bb06630b --- /dev/null +++ b/arch/arm/mach-mxs/gpio.h @@ -0,0 +1,34 @@ +/* + * Copyright 2007 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2008 Juergen Beisert, kernel@pengutronix.de + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ + +#ifndef __MXS_GPIO_H__ +#define __MXS_GPIO_H__ + +struct mxs_gpio_port { + void __iomem *base; + int id; + int irq; + int irq_high; + int virtual_irq_start; + struct gpio_chip chip; +}; + +int mxs_gpio_init(struct mxs_gpio_port*, int); + +#endif /* __MXS_GPIO_H__ */ diff --git a/arch/arm/mach-mxs/icoll.c b/arch/arm/mach-mxs/icoll.c new file mode 100644 index 00000000000..5dd43ba7005 --- /dev/null +++ b/arch/arm/mach-mxs/icoll.c @@ -0,0 +1,81 @@ +/* + * Copyright (C) 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/irq.h> +#include <linux/io.h> + +#include <mach/mxs.h> +#include <mach/common.h> + +#define HW_ICOLL_VECTOR 0x0000 +#define HW_ICOLL_LEVELACK 0x0010 +#define HW_ICOLL_CTRL 0x0020 +#define HW_ICOLL_INTERRUPTn_SET(n) (0x0124 + (n) * 0x10) +#define HW_ICOLL_INTERRUPTn_CLR(n) (0x0128 + (n) * 0x10) +#define BM_ICOLL_INTERRUPTn_ENABLE 0x00000004 +#define BV_ICOLL_LEVELACK_IRQLEVELACK__LEVEL0 0x1 + +static void __iomem *icoll_base = MXS_IO_ADDRESS(MXS_ICOLL_BASE_ADDR); + +static void icoll_ack_irq(unsigned int irq) +{ + /* + * The Interrupt Collector is able to prioritize irqs. + * Currently only level 0 is used. So acking can use + * BV_ICOLL_LEVELACK_IRQLEVELACK__LEVEL0 unconditionally. + */ + __raw_writel(BV_ICOLL_LEVELACK_IRQLEVELACK__LEVEL0, + icoll_base + HW_ICOLL_LEVELACK); +} + +static void icoll_mask_irq(unsigned int irq) +{ + __raw_writel(BM_ICOLL_INTERRUPTn_ENABLE, + icoll_base + HW_ICOLL_INTERRUPTn_CLR(irq)); +} + +static void icoll_unmask_irq(unsigned int irq) +{ + __raw_writel(BM_ICOLL_INTERRUPTn_ENABLE, + icoll_base + HW_ICOLL_INTERRUPTn_SET(irq)); +} + +static struct irq_chip mxs_icoll_chip = { + .ack = icoll_ack_irq, + .mask = icoll_mask_irq, + .unmask = icoll_unmask_irq, +}; + +void __init icoll_init_irq(void) +{ + int i; + + /* + * Interrupt Collector reset, which initializes the priority + * for each irq to level 0. + */ + mxs_reset_block(icoll_base + HW_ICOLL_CTRL); + + for (i = 0; i < MXS_INTERNAL_IRQS; i++) { + set_irq_chip(i, &mxs_icoll_chip); + set_irq_handler(i, handle_level_irq); + set_irq_flags(i, IRQF_VALID); + } +} diff --git a/arch/arm/mach-mxs/include/mach/clkdev.h b/arch/arm/mach-mxs/include/mach/clkdev.h new file mode 100644 index 00000000000..3a8f2e3a630 --- /dev/null +++ b/arch/arm/mach-mxs/include/mach/clkdev.h @@ -0,0 +1,7 @@ +#ifndef __MACH_MXS_CLKDEV_H__ +#define __MACH_MXS_CLKDEV_H__ + +#define __clk_get(clk) ({ 1; }) +#define __clk_put(clk) do { } while (0) + +#endif diff --git a/arch/arm/mach-mxs/include/mach/clock.h b/arch/arm/mach-mxs/include/mach/clock.h new file mode 100644 index 00000000000..041e276d8a3 --- /dev/null +++ b/arch/arm/mach-mxs/include/mach/clock.h @@ -0,0 +1,64 @@ +/* + * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2008 Juergen Beisert, kernel@pengutronix.de + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ + +#ifndef __MACH_MXS_CLOCK_H__ +#define __MACH_MXS_CLOCK_H__ + +#ifndef __ASSEMBLY__ +#include <linux/list.h> + +struct module; + +struct clk { + int id; + /* Source clock this clk depends on */ + struct clk *parent; + /* Secondary clock to enable/disable with this clock */ + struct clk *secondary; + /* Reference count of clock enable/disable */ + __s8 usecount; + /* Register bit position for clock's enable/disable control. */ + u8 enable_shift; + /* Register address for clock's enable/disable control. */ + void __iomem *enable_reg; + u32 flags; + /* get the current clock rate (always a fresh value) */ + unsigned long (*get_rate) (struct clk *); + /* Function ptr to set the clock to a new rate. The rate must match a + supported rate returned from round_rate. Leave blank if clock is not + programmable */ + int (*set_rate) (struct clk *, unsigned long); + /* Function ptr to round the requested clock rate to the nearest + supported rate that is less than or equal to the requested rate. */ + unsigned long (*round_rate) (struct clk *, unsigned long); + /* Function ptr to enable the clock. Leave blank if clock can not + be gated. */ + int (*enable) (struct clk *); + /* Function ptr to disable the clock. Leave blank if clock can not + be gated. */ + void (*disable) (struct clk *); + /* Function ptr to set the parent clock of the clock. */ + int (*set_parent) (struct clk *, struct clk *); +}; + +int clk_register(struct clk *clk); +void clk_unregister(struct clk *clk); + +#endif /* __ASSEMBLY__ */ +#endif /* __MACH_MXS_CLOCK_H__ */ diff --git a/arch/arm/mach-mxs/include/mach/common.h b/arch/arm/mach-mxs/include/mach/common.h new file mode 100644 index 00000000000..59133eb3cc9 --- /dev/null +++ b/arch/arm/mach-mxs/include/mach/common.h @@ -0,0 +1,31 @@ +/* + * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. + */ + +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __MACH_MXS_COMMON_H__ +#define __MACH_MXS_COMMON_H__ + +struct clk; + +extern int mxs_reset_block(void __iomem *); +extern void mxs_timer_init(struct clk *, int); + +extern int mx23_register_gpios(void); +extern int mx23_clocks_init(void); +extern void mx23_map_io(void); +extern void mx23_init_irq(void); + +extern int mx28_register_gpios(void); +extern int mx28_clocks_init(void); +extern void mx28_map_io(void); +extern void mx28_init_irq(void); + +extern void icoll_init_irq(void); + +#endif /* __MACH_MXS_COMMON_H__ */ diff --git a/arch/arm/mach-mxs/include/mach/debug-macro.S b/arch/arm/mach-mxs/include/mach/debug-macro.S new file mode 100644 index 00000000000..79650a1ad78 --- /dev/null +++ b/arch/arm/mach-mxs/include/mach/debug-macro.S @@ -0,0 +1,38 @@ +/* arch/arm/mach-mxs/include/mach/debug-macro.S + * + * Debugging macro include header + * + * Copyright (C) 1994-1999 Russell King + * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include <mach/mx23.h> +#include <mach/mx28.h> + +#ifdef CONFIG_SOC_IMX23 +#ifdef UART_PADDR +#error "CONFIG_DEBUG_LL is incompatible with multiple archs" +#endif +#define UART_PADDR MX23_DUART_BASE_ADDR +#endif + +#ifdef CONFIG_SOC_IMX28 +#ifdef UART_PADDR +#error "CONFIG_DEBUG_LL is incompatible with multiple archs" +#endif +#define UART_PADDR MX28_DUART_BASE_ADDR +#endif + +#define UART_VADDR MXS_IO_ADDRESS(UART_PADDR) + + .macro addruart, rp, rv + ldr \rp, =UART_PADDR @ physical + ldr \rv, =UART_VADDR @ virtual + .endm + +#include <asm/hardware/debug-pl01x.S> diff --git a/arch/arm/mach-mxs/include/mach/devices-common.h b/arch/arm/mach-mxs/include/mach/devices-common.h new file mode 100644 index 00000000000..3da48d4d327 --- /dev/null +++ b/arch/arm/mach-mxs/include/mach/devices-common.h @@ -0,0 +1,46 @@ +/* + * Copyright (C) 2009-2010 Pengutronix + * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de> + * + * This program is free software; you can redistribute it and/or modify it under + * the terms of the GNU General Public License version 2 as published by the + * Free Software Foundation. + */ +#include <linux/kernel.h> +#include <linux/platform_device.h> +#include <linux/init.h> + +struct platform_device *mxs_add_platform_device_dmamask( + const char *name, int id, + const struct resource *res, unsigned int num_resources, + const void *data, size_t size_data, u64 dmamask); + +static inline struct platform_device *mxs_add_platform_device( + const char *name, int id, + const struct resource *res, unsigned int num_resources, + const void *data, size_t size_data) +{ + return mxs_add_platform_device_dmamask( + name, id, res, num_resources, data, size_data, 0); +} + +/* duart */ +struct mxs_duart_data { + resource_size_t iobase; + resource_size_t iosize; + resource_size_t irq; +}; +struct platform_device *__init mxs_add_duart( + const struct mxs_duart_data *data); + +/* fec */ +#include <linux/fec.h> +struct mxs_fec_data { + int id; + resource_size_t iobase; + resource_size_t iosize; + resource_size_t irq; +}; +struct platform_device *__init mxs_add_fec( + const struct mxs_fec_data *data, + const struct fec_platform_data *pdata); diff --git a/arch/arm/mach-mxs/include/mach/entry-macro.S b/arch/arm/mach-mxs/include/mach/entry-macro.S new file mode 100644 index 00000000000..9f0da12e657 --- /dev/null +++ b/arch/arm/mach-mxs/include/mach/entry-macro.S @@ -0,0 +1,41 @@ +/* + * Low-level IRQ helper macros for Freescale MXS-based + * + * Copyright (C) 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + */ + +#include <mach/mxs.h> + +#define MXS_ICOLL_VBASE MXS_IO_ADDRESS(MXS_ICOLL_BASE_ADDR) +#define HW_ICOLL_STAT_OFFSET 0x70 + + .macro disable_fiq + .endm + + .macro get_irqnr_and_base, irqnr, irqstat, base, tmp + ldr \irqnr, [\base, #HW_ICOLL_STAT_OFFSET] + cmp \irqnr, #0x7F + strne \irqnr, [\base] + moveqs \irqnr, #0 + .endm + + .macro get_irqnr_preamble, base, tmp + ldr \base, =MXS_ICOLL_VBASE + .endm + + .macro arch_ret_to_user, tmp1, tmp2 + .endm diff --git a/arch/arm/mach-mxs/include/mach/gpio.h b/arch/arm/mach-mxs/include/mach/gpio.h new file mode 100644 index 00000000000..828ccccb6aa --- /dev/null +++ b/arch/arm/mach-mxs/include/mach/gpio.h @@ -0,0 +1,35 @@ +/* + * Copyright 2007 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2008 Juergen Beisert, kernel@pengutronix.de + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ + +#ifndef __MACH_MXS_GPIO_H__ +#define __MACH_MXS_GPIO_H__ + +#include <asm-generic/gpio.h> + +#define MXS_GPIO_NR(bank, nr) ((bank) * 32 + (nr)) + +/* use gpiolib dispatchers */ +#define gpio_get_value __gpio_get_value +#define gpio_set_value __gpio_set_value +#define gpio_cansleep __gpio_cansleep +#define gpio_to_irq __gpio_to_irq + +#define irq_to_gpio(irq) ((irq) - MXS_GPIO_IRQ_START) + +#endif /* __MACH_MXS_GPIO_H__ */ diff --git a/arch/arm/mach-mxs/include/mach/hardware.h b/arch/arm/mach-mxs/include/mach/hardware.h new file mode 100644 index 00000000000..53e89a09bf0 --- /dev/null +++ b/arch/arm/mach-mxs/include/mach/hardware.h @@ -0,0 +1,29 @@ +/* + * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2008 Juergen Beisert, kernel@pengutronix.de + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ + +#ifndef __MACH_MXS_HARDWARE_H__ +#define __MACH_MXS_HARDWARE_H__ + +#ifdef __ASSEMBLER__ +#define IOMEM(addr) (addr) +#else +#define IOMEM(addr) ((void __force __iomem *)(addr)) +#endif + +#endif /* __MACH_MXS_HARDWARE_H__ */ diff --git a/arch/arm/mach-mxs/include/mach/io.h b/arch/arm/mach-mxs/include/mach/io.h new file mode 100644 index 00000000000..289b7227e07 --- /dev/null +++ b/arch/arm/mach-mxs/include/mach/io.h @@ -0,0 +1,22 @@ +/* + * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. + */ + +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __MACH_MXS_IO_H__ +#define __MACH_MXS_IO_H__ + +/* Allow IO space to be anywhere in the memory */ +#define IO_SPACE_LIMIT 0xffffffff + +/* io address mapping macro */ +#define __io(a) __typesafe_io(a) + +#define __mem_pci(a) (a) + +#endif /* __MACH_MXS_IO_H__ */ diff --git a/arch/arm/mach-mxs/include/mach/iomux-mx23.h b/arch/arm/mach-mxs/include/mach/iomux-mx23.h new file mode 100644 index 00000000000..94e5dd83cdb --- /dev/null +++ b/arch/arm/mach-mxs/include/mach/iomux-mx23.h @@ -0,0 +1,355 @@ +/* + * Copyright (C) 2009-2010 Amit Kucheria <amit.kucheria@canonical.com> + * Copyright (C) 2010 Freescale Semiconductor, Inc. + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#ifndef __MACH_IOMUX_MX23_H__ +#define __MACH_IOMUX_MX23_H__ + +#include <mach/iomux.h> + +/* + * The naming convention for the pad modes is MX23_PAD_<padname>__<padmode> + * If <padname> or <padmode> refers to a GPIO, it is named GPIO_<unit>_<num> + * See also iomux.h + * + * BANK PIN MUX + */ +/* MUXSEL_0 */ +#define MX23_PAD_GPMI_D00__GPMI_D00 MXS_IOMUX_PAD_NAKED(0, 0, PAD_MUXSEL_0) +#define MX23_PAD_GPMI_D01__GPMI_D01 MXS_IOMUX_PAD_NAKED(0, 1, PAD_MUXSEL_0) +#define MX23_PAD_GPMI_D02__GPMI_D02 MXS_IOMUX_PAD_NAKED(0, 2, PAD_MUXSEL_0) +#define MX23_PAD_GPMI_D03__GPMI_D03 MXS_IOMUX_PAD_NAKED(0, 3, PAD_MUXSEL_0) +#define MX23_PAD_GPMI_D04__GPMI_D04 MXS_IOMUX_PAD_NAKED(0, 4, PAD_MUXSEL_0) +#define MX23_PAD_GPMI_D05__GPMI_D05 MXS_IOMUX_PAD_NAKED(0, 5, PAD_MUXSEL_0) +#define MX23_PAD_GPMI_D06__GPMI_D06 MXS_IOMUX_PAD_NAKED(0, 6, PAD_MUXSEL_0) +#define MX23_PAD_GPMI_D07__GPMI_D07 MXS_IOMUX_PAD_NAKED(0, 7, PAD_MUXSEL_0) +#define MX23_PAD_GPMI_D08__GPMI_D08 MXS_IOMUX_PAD_NAKED(0, 8, PAD_MUXSEL_0) +#define MX23_PAD_GPMI_D09__GPMI_D09 MXS_IOMUX_PAD_NAKED(0, 9, PAD_MUXSEL_0) +#define MX23_PAD_GPMI_D10__GPMI_D10 MXS_IOMUX_PAD_NAKED(0, 10, PAD_MUXSEL_0) +#define MX23_PAD_GPMI_D11__GPMI_D11 MXS_IOMUX_PAD_NAKED(0, 11, PAD_MUXSEL_0) +#define MX23_PAD_GPMI_D12__GPMI_D12 MXS_IOMUX_PAD_NAKED(0, 12, PAD_MUXSEL_0) +#define MX23_PAD_GPMI_D13__GPMI_D13 MXS_IOMUX_PAD_NAKED(0, 13, PAD_MUXSEL_0) +#define MX23_PAD_GPMI_D14__GPMI_D14 MXS_IOMUX_PAD_NAKED(0, 14, PAD_MUXSEL_0) +#define MX23_PAD_GPMI_D15__GPMI_D15 MXS_IOMUX_PAD_NAKED(0, 15, PAD_MUXSEL_0) +#define MX23_PAD_GPMI_CLE__GPMI_CLE MXS_IOMUX_PAD_NAKED(0, 16, PAD_MUXSEL_0) +#define MX23_PAD_GPMI_ALE__GPMI_ALE MXS_IOMUX_PAD_NAKED(0, 17, PAD_MUXSEL_0) +#define MX23_PAD_GPMI_CE2N__GPMI_CE2N MXS_IOMUX_PAD_NAKED(0, 18, PAD_MUXSEL_0) +#define MX23_PAD_GPMI_RDY0__GPMI_RDY0 MXS_IOMUX_PAD_NAKED(0, 19, PAD_MUXSEL_0) +#define MX23_PAD_GPMI_RDY1__GPMI_RDY1 MXS_IOMUX_PAD_NAKED(0, 20, PAD_MUXSEL_0) +#define MX23_PAD_GPMI_RDY2__GPMI_RDY2 MXS_IOMUX_PAD_NAKED(0, 21, PAD_MUXSEL_0) +#define MX23_PAD_GPMI_RDY3__GPMI_RDY3 MXS_IOMUX_PAD_NAKED(0, 22, PAD_MUXSEL_0) +#define MX23_PAD_GPMI_WPN__GPMI_WPN MXS_IOMUX_PAD_NAKED(0, 23, PAD_MUXSEL_0) +#define MX23_PAD_GPMI_WRN__GPMI_WRN MXS_IOMUX_PAD_NAKED(0, 24, PAD_MUXSEL_0) +#define MX23_PAD_GPMI_RDN__GPMI_RDN MXS_IOMUX_PAD_NAKED(0, 25, PAD_MUXSEL_0) +#define MX23_PAD_AUART1_CTS__AUART1_CTS MXS_IOMUX_PAD_NAKED(0, 26, PAD_MUXSEL_0) +#define MX23_PAD_AUART1_RTS__AUART1_RTS MXS_IOMUX_PAD_NAKED(0, 27, PAD_MUXSEL_0) +#define MX23_PAD_AUART1_RX__AUART1_RX MXS_IOMUX_PAD_NAKED(0, 28, PAD_MUXSEL_0) +#define MX23_PAD_AUART1_TX__AUART1_TX MXS_IOMUX_PAD_NAKED(0, 29, PAD_MUXSEL_0) +#define MX23_PAD_I2C_SCL__I2C_SCL MXS_IOMUX_PAD_NAKED(0, 30, PAD_MUXSEL_0) +#define MX23_PAD_I2C_SDA__I2C_SDA MXS_IOMUX_PAD_NAKED(0, 31, PAD_MUXSEL_0) + +#define MX23_PAD_LCD_D00__LCD_D00 MXS_IOMUX_PAD_NAKED(1, 0, PAD_MUXSEL_0) +#define MX23_PAD_LCD_D01__LCD_D01 MXS_IOMUX_PAD_NAKED(1, 1, PAD_MUXSEL_0) +#define MX23_PAD_LCD_D02__LCD_D02 MXS_IOMUX_PAD_NAKED(1, 2, PAD_MUXSEL_0) +#define MX23_PAD_LCD_D03__LCD_D03 MXS_IOMUX_PAD_NAKED(1, 3, PAD_MUXSEL_0) +#define MX23_PAD_LCD_D04__LCD_D04 MXS_IOMUX_PAD_NAKED(1, 4, PAD_MUXSEL_0) +#define MX23_PAD_LCD_D05__LCD_D05 MXS_IOMUX_PAD_NAKED(1, 5, PAD_MUXSEL_0) +#define MX23_PAD_LCD_D06__LCD_D06 MXS_IOMUX_PAD_NAKED(1, 6, PAD_MUXSEL_0) +#define MX23_PAD_LCD_D07__LCD_D07 MXS_IOMUX_PAD_NAKED(1, 7, PAD_MUXSEL_0) +#define MX23_PAD_LCD_D08__LCD_D08 MXS_IOMUX_PAD_NAKED(1, 8, PAD_MUXSEL_0) +#define MX23_PAD_LCD_D09__LCD_D09 MXS_IOMUX_PAD_NAKED(1, 9, PAD_MUXSEL_0) +#define MX23_PAD_LCD_D10__LCD_D10 MXS_IOMUX_PAD_NAKED(1, 10, PAD_MUXSEL_0) +#define MX23_PAD_LCD_D11__LCD_D11 MXS_IOMUX_PAD_NAKED(1, 11, PAD_MUXSEL_0) +#define MX23_PAD_LCD_D12__LCD_D12 MXS_IOMUX_PAD_NAKED(1, 12, PAD_MUXSEL_0) +#define MX23_PAD_LCD_D13__LCD_D13 MXS_IOMUX_PAD_NAKED(1, 13, PAD_MUXSEL_0) +#define MX23_PAD_LCD_D14__LCD_D14 MXS_IOMUX_PAD_NAKED(1, 14, PAD_MUXSEL_0) +#define MX23_PAD_LCD_D15__LCD_D15 MXS_IOMUX_PAD_NAKED(1, 15, PAD_MUXSEL_0) +#define MX23_PAD_LCD_D16__LCD_D16 MXS_IOMUX_PAD_NAKED(1, 16, PAD_MUXSEL_0) +#define MX23_PAD_LCD_D17__LCD_D17 MXS_IOMUX_PAD_NAKED(1, 17, PAD_MUXSEL_0) +#define MX23_PAD_LCD_RESET__LCD_RESET MXS_IOMUX_PAD_NAKED(1, 18, PAD_MUXSEL_0) +#define MX23_PAD_LCD_RS__LCD_RS MXS_IOMUX_PAD_NAKED(1, 19, PAD_MUXSEL_0) +#define MX23_PAD_LCD_WR__LCD_WR MXS_IOMUX_PAD_NAKED(1, 20, PAD_MUXSEL_0) +#define MX23_PAD_LCD_CS__LCD_CS MXS_IOMUX_PAD_NAKED(1, 21, PAD_MUXSEL_0) +#define MX23_PAD_LCD_DOTCK__LCD_DOTCK MXS_IOMUX_PAD_NAKED(1, 22, PAD_MUXSEL_0) +#define MX23_PAD_LCD_ENABLE__LCD_ENABLE MXS_IOMUX_PAD_NAKED(1, 23, PAD_MUXSEL_0) +#define MX23_PAD_LCD_HSYNC__LCD_HSYNC MXS_IOMUX_PAD_NAKED(1, 24, PAD_MUXSEL_0) +#define MX23_PAD_LCD_VSYNC__LCD_VSYNC MXS_IOMUX_PAD_NAKED(1, 25, PAD_MUXSEL_0) +#define MX23_PAD_PWM0__PWM0 MXS_IOMUX_PAD_NAKED(1, 26, PAD_MUXSEL_0) +#define MX23_PAD_PWM1__PWM1 MXS_IOMUX_PAD_NAKED(1, 27, PAD_MUXSEL_0) +#define MX23_PAD_PWM2__PWM2 MXS_IOMUX_PAD_NAKED(1, 28, PAD_MUXSEL_0) +#define MX23_PAD_PWM3__PWM3 MXS_IOMUX_PAD_NAKED(1, 29, PAD_MUXSEL_0) +#define MX23_PAD_PWM4__PWM4 MXS_IOMUX_PAD_NAKED(1, 30, PAD_MUXSEL_0) + +#define MX23_PAD_SSP1_CMD__SSP1_CMD MXS_IOMUX_PAD_NAKED(2, 0, PAD_MUXSEL_0) +#define MX23_PAD_SSP1_DETECT__SSP1_DETECT MXS_IOMUX_PAD_NAKED(2, 1, PAD_MUXSEL_0) +#define MX23_PAD_SSP1_DATA0__SSP1_DATA0 MXS_IOMUX_PAD_NAKED(2, 2, PAD_MUXSEL_0) +#define MX23_PAD_SSP1_DATA1__SSP1_DATA1 MXS_IOMUX_PAD_NAKED(2, 3, PAD_MUXSEL_0) +#define MX23_PAD_SSP1_DATA2__SSP1_DATA2 MXS_IOMUX_PAD_NAKED(2, 4, PAD_MUXSEL_0) +#define MX23_PAD_SSP1_DATA3__SSP1_DATA3 MXS_IOMUX_PAD_NAKED(2, 5, PAD_MUXSEL_0) +#define MX23_PAD_SSP1_SCK__SSP1_SCK MXS_IOMUX_PAD_NAKED(2, 6, PAD_MUXSEL_0) +#define MX23_PAD_ROTARYA__ROTARYA MXS_IOMUX_PAD_NAKED(2, 7, PAD_MUXSEL_0) +#define MX23_PAD_ROTARYB__ROTARYB MXS_IOMUX_PAD_NAKED(2, 8, PAD_MUXSEL_0) +#define MX23_PAD_EMI_A00__EMI_A00 MXS_IOMUX_PAD_NAKED(2, 9, PAD_MUXSEL_0) +#define MX23_PAD_EMI_A01__EMI_A01 MXS_IOMUX_PAD_NAKED(2, 10, PAD_MUXSEL_0) +#define MX23_PAD_EMI_A02__EMI_A02 MXS_IOMUX_PAD_NAKED(2, 11, PAD_MUXSEL_0) +#define MX23_PAD_EMI_A03__EMI_A03 MXS_IOMUX_PAD_NAKED(2, 12, PAD_MUXSEL_0) +#define MX23_PAD_EMI_A04__EMI_A04 MXS_IOMUX_PAD_NAKED(2, 13, PAD_MUXSEL_0) +#define MX23_PAD_EMI_A05__EMI_A05 MXS_IOMUX_PAD_NAKED(2, 14, PAD_MUXSEL_0) +#define MX23_PAD_EMI_A06__EMI_A06 MXS_IOMUX_PAD_NAKED(2, 15, PAD_MUXSEL_0) +#define MX23_PAD_EMI_A07__EMI_A07 MXS_IOMUX_PAD_NAKED(2, 16, PAD_MUXSEL_0) +#define MX23_PAD_EMI_A08__EMI_A08 MXS_IOMUX_PAD_NAKED(2, 17, PAD_MUXSEL_0) +#define MX23_PAD_EMI_A09__EMI_A09 MXS_IOMUX_PAD_NAKED(2, 18, PAD_MUXSEL_0) +#define MX23_PAD_EMI_A10__EMI_A10 MXS_IOMUX_PAD_NAKED(2, 19, PAD_MUXSEL_0) +#define MX23_PAD_EMI_A11__EMI_A11 MXS_IOMUX_PAD_NAKED(2, 20, PAD_MUXSEL_0) +#define MX23_PAD_EMI_A12__EMI_A12 MXS_IOMUX_PAD_NAKED(2, 21, PAD_MUXSEL_0) +#define MX23_PAD_EMI_BA0__EMI_BA0 MXS_IOMUX_PAD_NAKED(2, 22, PAD_MUXSEL_0) +#define MX23_PAD_EMI_BA1__EMI_BA1 MXS_IOMUX_PAD_NAKED(2, 23, PAD_MUXSEL_0) +#define MX23_PAD_EMI_CASN__EMI_CASN MXS_IOMUX_PAD_NAKED(2, 24, PAD_MUXSEL_0) +#define MX23_PAD_EMI_CE0N__EMI_CE0N MXS_IOMUX_PAD_NAKED(2, 25, PAD_MUXSEL_0) +#define MX23_PAD_EMI_CE1N__EMI_CE1N MXS_IOMUX_PAD_NAKED(2, 26, PAD_MUXSEL_0) +#define MX23_PAD_GPMI_CE1N__GPMI_CE1N MXS_IOMUX_PAD_NAKED(2, 27, PAD_MUXSEL_0) +#define MX23_PAD_GPMI_CE0N__GPMI_CE0N MXS_IOMUX_PAD_NAKED(2, 28, PAD_MUXSEL_0) +#define MX23_PAD_EMI_CKE__EMI_CKE MXS_IOMUX_PAD_NAKED(2, 29, PAD_MUXSEL_0) +#define MX23_PAD_EMI_RASN__EMI_RASN MXS_IOMUX_PAD_NAKED(2, 30, PAD_MUXSEL_0) +#define MX23_PAD_EMI_WEN__EMI_WEN MXS_IOMUX_PAD_NAKED(2, 31, PAD_MUXSEL_0) + +#define MX23_PAD_EMI_D00__EMI_D00 MXS_IOMUX_PAD_NAKED(3, 0, PAD_MUXSEL_0) +#define MX23_PAD_EMI_D01__EMI_D01 MXS_IOMUX_PAD_NAKED(3, 1, PAD_MUXSEL_0) +#define MX23_PAD_EMI_D02__EMI_D02 MXS_IOMUX_PAD_NAKED(3, 2, PAD_MUXSEL_0) +#define MX23_PAD_EMI_D03__EMI_D03 MXS_IOMUX_PAD_NAKED(3, 3, PAD_MUXSEL_0) +#define MX23_PAD_EMI_D04__EMI_D04 MXS_IOMUX_PAD_NAKED(3, 4, PAD_MUXSEL_0) +#define MX23_PAD_EMI_D05__EMI_D05 MXS_IOMUX_PAD_NAKED(3, 5, PAD_MUXSEL_0) +#define MX23_PAD_EMI_D06__EMI_D06 MXS_IOMUX_PAD_NAKED(3, 6, PAD_MUXSEL_0) +#define MX23_PAD_EMI_D07__EMI_D07 MXS_IOMUX_PAD_NAKED(3, 7, PAD_MUXSEL_0) +#define MX23_PAD_EMI_D08__EMI_D08 MXS_IOMUX_PAD_NAKED(3, 8, PAD_MUXSEL_0) +#define MX23_PAD_EMI_D09__EMI_D09 MXS_IOMUX_PAD_NAKED(3, 9, PAD_MUXSEL_0) +#define MX23_PAD_EMI_D10__EMI_D10 MXS_IOMUX_PAD_NAKED(3, 10, PAD_MUXSEL_0) +#define MX23_PAD_EMI_D11__EMI_D11 MXS_IOMUX_PAD_NAKED(3, 11, PAD_MUXSEL_0) +#define MX23_PAD_EMI_D12__EMI_D12 MXS_IOMUX_PAD_NAKED(3, 12, PAD_MUXSEL_0) +#define MX23_PAD_EMI_D13__EMI_D13 MXS_IOMUX_PAD_NAKED(3, 13, PAD_MUXSEL_0) +#define MX23_PAD_EMI_D14__EMI_D14 MXS_IOMUX_PAD_NAKED(3, 14, PAD_MUXSEL_0) +#define MX23_PAD_EMI_D15__EMI_D15 MXS_IOMUX_PAD_NAKED(3, 15, PAD_MUXSEL_0) +#define MX23_PAD_EMI_DQM0__EMI_DQM0 MXS_IOMUX_PAD_NAKED(3, 16, PAD_MUXSEL_0) +#define MX23_PAD_EMI_DQM1__EMI_DQM1 MXS_IOMUX_PAD_NAKED(3, 17, PAD_MUXSEL_0) +#define MX23_PAD_EMI_DQS0__EMI_DQS0 MXS_IOMUX_PAD_NAKED(3, 18, PAD_MUXSEL_0) +#define MX23_PAD_EMI_DQS1__EMI_DQS1 MXS_IOMUX_PAD_NAKED(3, 19, PAD_MUXSEL_0) +#define MX23_PAD_EMI_CLK__EMI_CLK MXS_IOMUX_PAD_NAKED(3, 20, PAD_MUXSEL_0) +#define MX23_PAD_EMI_CLKN__EMI_CLKN MXS_IOMUX_PAD_NAKED(3, 21, PAD_MUXSEL_0) + +/* MUXSEL_1 */ +#define MX23_PAD_GPMI_D00__LCD_D8 MXS_IOMUX_PAD_NAKED(0, 0, PAD_MUXSEL_1) +#define MX23_PAD_GPMI_D01__LCD_D9 MXS_IOMUX_PAD_NAKED(0, 1, PAD_MUXSEL_1) +#define MX23_PAD_GPMI_D02__LCD_D10 MXS_IOMUX_PAD_NAKED(0, 2, PAD_MUXSEL_1) +#define MX23_PAD_GPMI_D03__LCD_D11 MXS_IOMUX_PAD_NAKED(0, 3, PAD_MUXSEL_1) +#define MX23_PAD_GPMI_D04__LCD_D12 MXS_IOMUX_PAD_NAKED(0, 4, PAD_MUXSEL_1) +#define MX23_PAD_GPMI_D05__LCD_D13 MXS_IOMUX_PAD_NAKED(0, 5, PAD_MUXSEL_1) +#define MX23_PAD_GPMI_D06__LCD_D14 MXS_IOMUX_PAD_NAKED(0, 6, PAD_MUXSEL_1) +#define MX23_PAD_GPMI_D07__LCD_D15 MXS_IOMUX_PAD_NAKED(0, 7, PAD_MUXSEL_1) +#define MX23_PAD_GPMI_D08__LCD_D18 MXS_IOMUX_PAD_NAKED(0, 8, PAD_MUXSEL_1) +#define MX23_PAD_GPMI_D09__LCD_D19 MXS_IOMUX_PAD_NAKED(0, 9, PAD_MUXSEL_1) +#define MX23_PAD_GPMI_D10__LCD_D20 MXS_IOMUX_PAD_NAKED(0, 10, PAD_MUXSEL_1) +#define MX23_PAD_GPMI_D11__LCD_D21 MXS_IOMUX_PAD_NAKED(0, 11, PAD_MUXSEL_1) +#define MX23_PAD_GPMI_D12__LCD_D22 MXS_IOMUX_PAD_NAKED(0, 12, PAD_MUXSEL_1) +#define MX23_PAD_GPMI_D13__LCD_D23 MXS_IOMUX_PAD_NAKED(0, 13, PAD_MUXSEL_1) +#define MX23_PAD_GPMI_D14__AUART2_RX MXS_IOMUX_PAD_NAKED(0, 14, PAD_MUXSEL_1) +#define MX23_PAD_GPMI_D15__AUART2_TX MXS_IOMUX_PAD_NAKED(0, 15, PAD_MUXSEL_1) +#define MX23_PAD_GPMI_CLE__LCD_D16 MXS_IOMUX_PAD_NAKED(0, 16, PAD_MUXSEL_1) +#define MX23_PAD_GPMI_ALE__LCD_D17 MXS_IOMUX_PAD_NAKED(0, 17, PAD_MUXSEL_1) +#define MX23_PAD_GPMI_CE2N__ATA_A2 MXS_IOMUX_PAD_NAKED(0, 18, PAD_MUXSEL_1) +#define MX23_PAD_AUART1_RTS__IR_CLK MXS_IOMUX_PAD_NAKED(0, 27, PAD_MUXSEL_1) +#define MX23_PAD_AUART1_RX__IR_RX MXS_IOMUX_PAD_NAKED(0, 28, PAD_MUXSEL_1) +#define MX23_PAD_AUART1_TX__IR_TX MXS_IOMUX_PAD_NAKED(0, 29, PAD_MUXSEL_1) +#define MX23_PAD_I2C_SCL__GPMI_RDY2 MXS_IOMUX_PAD_NAKED(0, 30, PAD_MUXSEL_1) +#define MX23_PAD_I2C_SDA__GPMI_CE2N MXS_IOMUX_PAD_NAKED(0, 31, PAD_MUXSEL_1) + +#define MX23_PAD_LCD_D00__ETM_DA8 MXS_IOMUX_PAD_NAKED(1, 0, PAD_MUXSEL_1) +#define MX23_PAD_LCD_D01__ETM_DA9 MXS_IOMUX_PAD_NAKED(1, 1, PAD_MUXSEL_1) +#define MX23_PAD_LCD_D02__ETM_DA10 MXS_IOMUX_PAD_NAKED(1, 2, PAD_MUXSEL_1) +#define MX23_PAD_LCD_D03__ETM_DA11 MXS_IOMUX_PAD_NAKED(1, 3, PAD_MUXSEL_1) +#define MX23_PAD_LCD_D04__ETM_DA12 MXS_IOMUX_PAD_NAKED(1, 4, PAD_MUXSEL_1) +#define MX23_PAD_LCD_D05__ETM_DA13 MXS_IOMUX_PAD_NAKED(1, 5, PAD_MUXSEL_1) +#define MX23_PAD_LCD_D06__ETM_DA14 MXS_IOMUX_PAD_NAKED(1, 6, PAD_MUXSEL_1) +#define MX23_PAD_LCD_D07__ETM_DA15 MXS_IOMUX_PAD_NAKED(1, 7, PAD_MUXSEL_1) +#define MX23_PAD_LCD_D08__ETM_DA0 MXS_IOMUX_PAD_NAKED(1, 8, PAD_MUXSEL_1) +#define MX23_PAD_LCD_D09__ETM_DA1 MXS_IOMUX_PAD_NAKED(1, 9, PAD_MUXSEL_1) +#define MX23_PAD_LCD_D10__ETM_DA2 MXS_IOMUX_PAD_NAKED(1, 10, PAD_MUXSEL_1) +#define MX23_PAD_LCD_D11__ETM_DA3 MXS_IOMUX_PAD_NAKED(1, 11, PAD_MUXSEL_1) +#define MX23_PAD_LCD_D12__ETM_DA4 MXS_IOMUX_PAD_NAKED(1, 12, PAD_MUXSEL_1) +#define MX23_PAD_LCD_D13__ETM_DA5 MXS_IOMUX_PAD_NAKED(1, 13, PAD_MUXSEL_1) +#define MX23_PAD_LCD_D14__ETM_DA6 MXS_IOMUX_PAD_NAKED(1, 14, PAD_MUXSEL_1) +#define MX23_PAD_LCD_D15__ETM_DA7 MXS_IOMUX_PAD_NAKED(1, 15, PAD_MUXSEL_1) +#define MX23_PAD_LCD_RESET__ETM_TCTL MXS_IOMUX_PAD_NAKED(1, 18, PAD_MUXSEL_1) +#define MX23_PAD_LCD_RS__ETM_TCLK MXS_IOMUX_PAD_NAKED(1, 19, PAD_MUXSEL_1) +#define MX23_PAD_LCD_DOTCK__GPMI_RDY3 MXS_IOMUX_PAD_NAKED(1, 22, PAD_MUXSEL_1) +#define MX23_PAD_LCD_ENABLE__I2C_SCL MXS_IOMUX_PAD_NAKED(1, 23, PAD_MUXSEL_1) +#define MX23_PAD_LCD_HSYNC__I2C_SDA MXS_IOMUX_PAD_NAKED(1, 24, PAD_MUXSEL_1) +#define MX23_PAD_LCD_VSYNC__LCD_BUSY MXS_IOMUX_PAD_NAKED(1, 25, PAD_MUXSEL_1) +#define MX23_PAD_PWM0__ROTARYA MXS_IOMUX_PAD_NAKED(1, 26, PAD_MUXSEL_1) +#define MX23_PAD_PWM1__ROTARYB MXS_IOMUX_PAD_NAKED(1, 27, PAD_MUXSEL_1) +#define MX23_PAD_PWM2__GPMI_RDY3 MXS_IOMUX_PAD_NAKED(1, 28, PAD_MUXSEL_1) +#define MX23_PAD_PWM3__ETM_TCTL MXS_IOMUX_PAD_NAKED(1, 29, PAD_MUXSEL_1) +#define MX23_PAD_PWM4__ETM_TCLK MXS_IOMUX_PAD_NAKED(1, 30, PAD_MUXSEL_1) + +#define MX23_PAD_SSP1_DETECT__GPMI_CE3N MXS_IOMUX_PAD_NAKED(2, 1, PAD_MUXSEL_1) +#define MX23_PAD_SSP1_DATA1__I2C_SCL MXS_IOMUX_PAD_NAKED(2, 3, PAD_MUXSEL_1) +#define MX23_PAD_SSP1_DATA2__I2C_SDA MXS_IOMUX_PAD_NAKED(2, 4, PAD_MUXSEL_1) +#define MX23_PAD_ROTARYA__AUART2_RTS MXS_IOMUX_PAD_NAKED(2, 7, PAD_MUXSEL_1) +#define MX23_PAD_ROTARYB__AUART2_CTS MXS_IOMUX_PAD_NAKED(2, 8, PAD_MUXSEL_1) + +/* MUXSEL_2 */ +#define MX23_PAD_GPMI_D00__SSP2_DATA0 MXS_IOMUX_PAD_NAKED(0, 0, PAD_MUXSEL_2) +#define MX23_PAD_GPMI_D01__SSP2_DATA1 MXS_IOMUX_PAD_NAKED(0, 1, PAD_MUXSEL_2) +#define MX23_PAD_GPMI_D02__SSP2_DATA2 MXS_IOMUX_PAD_NAKED(0, 2, PAD_MUXSEL_2) +#define MX23_PAD_GPMI_D03__SSP2_DATA3 MXS_IOMUX_PAD_NAKED(0, 3, PAD_MUXSEL_2) +#define MX23_PAD_GPMI_D04__SSP2_DATA4 MXS_IOMUX_PAD_NAKED(0, 4, PAD_MUXSEL_2) +#define MX23_PAD_GPMI_D05__SSP2_DATA5 MXS_IOMUX_PAD_NAKED(0, 5, PAD_MUXSEL_2) +#define MX23_PAD_GPMI_D06__SSP2_DATA6 MXS_IOMUX_PAD_NAKED(0, 6, PAD_MUXSEL_2) +#define MX23_PAD_GPMI_D07__SSP2_DATA7 MXS_IOMUX_PAD_NAKED(0, 7, PAD_MUXSEL_2) +#define MX23_PAD_GPMI_D08__SSP1_DATA4 MXS_IOMUX_PAD_NAKED(0, 8, PAD_MUXSEL_2) +#define MX23_PAD_GPMI_D09__SSP1_DATA5 MXS_IOMUX_PAD_NAKED(0, 9, PAD_MUXSEL_2) +#define MX23_PAD_GPMI_D10__SSP1_DATA6 MXS_IOMUX_PAD_NAKED(0, 10, PAD_MUXSEL_2) +#define MX23_PAD_GPMI_D11__SSP1_DATA7 MXS_IOMUX_PAD_NAKED(0, 11, PAD_MUXSEL_2) +#define MX23_PAD_GPMI_D15__GPMI_CE3N MXS_IOMUX_PAD_NAKED(0, 15, PAD_MUXSEL_2) +#define MX23_PAD_GPMI_RDY0__SSP2_DETECT MXS_IOMUX_PAD_NAKED(0, 19, PAD_MUXSEL_2) +#define MX23_PAD_GPMI_RDY1__SSP2_CMD MXS_IOMUX_PAD_NAKED(0, 20, PAD_MUXSEL_2) +#define MX23_PAD_GPMI_WRN__SSP2_SCK MXS_IOMUX_PAD_NAKED(0, 24, PAD_MUXSEL_2) +#define MX23_PAD_AUART1_CTS__SSP1_DATA4 MXS_IOMUX_PAD_NAKED(0, 26, PAD_MUXSEL_2) +#define MX23_PAD_AUART1_RTS__SSP1_DATA5 MXS_IOMUX_PAD_NAKED(0, 27, PAD_MUXSEL_2) +#define MX23_PAD_AUART1_RX__SSP1_DATA6 MXS_IOMUX_PAD_NAKED(0, 28, PAD_MUXSEL_2) +#define MX23_PAD_AUART1_TX__SSP1_DATA7 MXS_IOMUX_PAD_NAKED(0, 29, PAD_MUXSEL_2) +#define MX23_PAD_I2C_SCL__AUART1_TX MXS_IOMUX_PAD_NAKED(0, 30, PAD_MUXSEL_2) +#define MX23_PAD_I2C_SDA__AUART1_RX MXS_IOMUX_PAD_NAKED(0, 31, PAD_MUXSEL_2) + +#define MX23_PAD_LCD_D08__SAIF2_SDATA0 MXS_IOMUX_PAD_NAKED(1, 8, PAD_MUXSEL_2) +#define MX23_PAD_LCD_D09__SAIF1_SDATA0 MXS_IOMUX_PAD_NAKED(1, 9, PAD_MUXSEL_2) +#define MX23_PAD_LCD_D10__SAIF_MCLK_BITCLK MXS_IOMUX_PAD_NAKED(1, 10, PAD_MUXSEL_2) +#define MX23_PAD_LCD_D11__SAIF_LRCLK MXS_IOMUX_PAD_NAKED(1, 11, PAD_MUXSEL_2) +#define MX23_PAD_LCD_D12__SAIF2_SDATA1 MXS_IOMUX_PAD_NAKED(1, 12, PAD_MUXSEL_2) +#define MX23_PAD_LCD_D13__SAIF2_SDATA2 MXS_IOMUX_PAD_NAKED(1, 13, PAD_MUXSEL_2) +#define MX23_PAD_LCD_D14__SAIF1_SDATA2 MXS_IOMUX_PAD_NAKED(1, 14, PAD_MUXSEL_2) +#define MX23_PAD_LCD_D15__SAIF1_SDATA1 MXS_IOMUX_PAD_NAKED(1, 15, PAD_MUXSEL_2) +#define MX23_PAD_LCD_D16__SAIF_ALT_BITCLK MXS_IOMUX_PAD_NAKED(1, 16, PAD_MUXSEL_2) +#define MX23_PAD_LCD_RESET__GPMI_CE3N MXS_IOMUX_PAD_NAKED(1, 18, PAD_MUXSEL_2) +#define MX23_PAD_PWM0__DUART_RX MXS_IOMUX_PAD_NAKED(1, 26, PAD_MUXSEL_2) +#define MX23_PAD_PWM1__DUART_TX MXS_IOMUX_PAD_NAKED(1, 27, PAD_MUXSEL_2) +#define MX23_PAD_PWM3__AUART1_CTS MXS_IOMUX_PAD_NAKED(1, 29, PAD_MUXSEL_2) +#define MX23_PAD_PWM4__AUART1_RTS MXS_IOMUX_PAD_NAKED(1, 30, PAD_MUXSEL_2) + +#define MX23_PAD_SSP1_CMD__JTAG_TDO MXS_IOMUX_PAD_NAKED(2, 0, PAD_MUXSEL_2) +#define MX23_PAD_SSP1_DETECT__USB_OTG_ID MXS_IOMUX_PAD_NAKED(2, 1, PAD_MUXSEL_2) +#define MX23_PAD_SSP1_DATA0__JTAG_TDI MXS_IOMUX_PAD_NAKED(2, 2, PAD_MUXSEL_2) +#define MX23_PAD_SSP1_DATA1__JTAG_TCLK MXS_IOMUX_PAD_NAKED(2, 3, PAD_MUXSEL_2) +#define MX23_PAD_SSP1_DATA2__JTAG_RTCK MXS_IOMUX_PAD_NAKED(2, 4, PAD_MUXSEL_2) +#define MX23_PAD_SSP1_DATA3__JTAG_TMS MXS_IOMUX_PAD_NAKED(2, 5, PAD_MUXSEL_2) +#define MX23_PAD_SSP1_SCK__JTAG_TRST MXS_IOMUX_PAD_NAKED(2, 6, PAD_MUXSEL_2) +#define MX23_PAD_ROTARYA__SPDIF MXS_IOMUX_PAD_NAKED(2, 7, PAD_MUXSEL_2) +#define MX23_PAD_ROTARYB__GPMI_CE3N MXS_IOMUX_PAD_NAKED(2, 8, PAD_MUXSEL_2) + +/* MUXSEL_GPIO */ +#define MX23_PAD_GPMI_D00__GPO_0_0 MXS_IOMUX_PAD_NAKED(0, 0, PAD_MUXSEL_GPIO) +#define MX23_PAD_GPMI_D01__GPO_0_1 MXS_IOMUX_PAD_NAKED(0, 1, PAD_MUXSEL_GPIO) +#define MX23_PAD_GPMI_D02__GPO_0_2 MXS_IOMUX_PAD_NAKED(0, 2, PAD_MUXSEL_GPIO) +#define MX23_PAD_GPMI_D03__GPO_0_3 MXS_IOMUX_PAD_NAKED(0, 3, PAD_MUXSEL_GPIO) +#define MX23_PAD_GPMI_D04__GPO_0_4 MXS_IOMUX_PAD_NAKED(0, 4, PAD_MUXSEL_GPIO) +#define MX23_PAD_GPMI_D05__GPO_0_5 MXS_IOMUX_PAD_NAKED(0, 5, PAD_MUXSEL_GPIO) +#define MX23_PAD_GPMI_D06__GPO_0_6 MXS_IOMUX_PAD_NAKED(0, 6, PAD_MUXSEL_GPIO) +#define MX23_PAD_GPMI_D07__GPO_0_7 MXS_IOMUX_PAD_NAKED(0, 7, PAD_MUXSEL_GPIO) +#define MX23_PAD_GPMI_D08__GPO_0_8 MXS_IOMUX_PAD_NAKED(0, 8, PAD_MUXSEL_GPIO) +#define MX23_PAD_GPMI_D09__GPO_0_9 MXS_IOMUX_PAD_NAKED(0, 9, PAD_MUXSEL_GPIO) +#define MX23_PAD_GPMI_D10__GPO_0_10 MXS_IOMUX_PAD_NAKED(0, 10, PAD_MUXSEL_GPIO) +#define MX23_PAD_GPMI_D11__GPO_0_11 MXS_IOMUX_PAD_NAKED(0, 11, PAD_MUXSEL_GPIO) +#define MX23_PAD_GPMI_D12__GPO_0_12 MXS_IOMUX_PAD_NAKED(0, 12, PAD_MUXSEL_GPIO) +#define MX23_PAD_GPMI_D13__GPO_0_13 MXS_IOMUX_PAD_NAKED(0, 13, PAD_MUXSEL_GPIO) +#define MX23_PAD_GPMI_D14__GPO_0_14 MXS_IOMUX_PAD_NAKED(0, 14, PAD_MUXSEL_GPIO) +#define MX23_PAD_GPMI_D15__GPO_0_15 MXS_IOMUX_PAD_NAKED(0, 15, PAD_MUXSEL_GPIO) +#define MX23_PAD_GPMI_CLE__GPO_0_16 MXS_IOMUX_PAD_NAKED(0, 16, PAD_MUXSEL_GPIO) +#define MX23_PAD_GPMI_ALE__GPO_0_17 MXS_IOMUX_PAD_NAKED(0, 17, PAD_MUXSEL_GPIO) +#define MX23_PAD_GPMI_CE2N__GPO_0_18 MXS_IOMUX_PAD_NAKED(0, 18, PAD_MUXSEL_GPIO) +#define MX23_PAD_GPMI_RDY0__GPO_0_19 MXS_IOMUX_PAD_NAKED(0, 19, PAD_MUXSEL_GPIO) +#define MX23_PAD_GPMI_RDY1__GPO_0_20 MXS_IOMUX_PAD_NAKED(0, 20, PAD_MUXSEL_GPIO) +#define MX23_PAD_GPMI_RDY2__GPO_0_21 MXS_IOMUX_PAD_NAKED(0, 21, PAD_MUXSEL_GPIO) +#define MX23_PAD_GPMI_RDY3__GPO_0_22 MXS_IOMUX_PAD_NAKED(0, 22, PAD_MUXSEL_GPIO) +#define MX23_PAD_GPMI_WPN__GPO_0_23 MXS_IOMUX_PAD_NAKED(0, 23, PAD_MUXSEL_GPIO) +#define MX23_PAD_GPMI_WRN__GPO_0_24 MXS_IOMUX_PAD_NAKED(0, 24, PAD_MUXSEL_GPIO) +#define MX23_PAD_GPMI_RDN__GPO_0_25 MXS_IOMUX_PAD_NAKED(0, 25, PAD_MUXSEL_GPIO) +#define MX23_PAD_AUART1_CTS__GPO_0_26 MXS_IOMUX_PAD_NAKED(0, 26, PAD_MUXSEL_GPIO) +#define MX23_PAD_AUART1_RTS__GPO_0_27 MXS_IOMUX_PAD_NAKED(0, 27, PAD_MUXSEL_GPIO) +#define MX23_PAD_AUART1_RX__GPO_0_28 MXS_IOMUX_PAD_NAKED(0, 28, PAD_MUXSEL_GPIO) +#define MX23_PAD_AUART1_TX__GPO_0_29 MXS_IOMUX_PAD_NAKED(0, 29, PAD_MUXSEL_GPIO) +#define MX23_PAD_I2C_SCL__GPO_0_30 MXS_IOMUX_PAD_NAKED(0, 30, PAD_MUXSEL_GPIO) +#define MX23_PAD_I2C_SDA__GPO_0_31 MXS_IOMUX_PAD_NAKED(0, 31, PAD_MUXSEL_GPIO) + +#define MX23_PAD_LCD_D00__GPO_1_0 MXS_IOMUX_PAD_NAKED(1, 0, PAD_MUXSEL_GPIO) +#define MX23_PAD_LCD_D01__GPO_1_1 MXS_IOMUX_PAD_NAKED(1, 1, PAD_MUXSEL_GPIO) +#define MX23_PAD_LCD_D02__GPO_1_2 MXS_IOMUX_PAD_NAKED(1, 2, PAD_MUXSEL_GPIO) +#define MX23_PAD_LCD_D03__GPO_1_3 MXS_IOMUX_PAD_NAKED(1, 3, PAD_MUXSEL_GPIO) +#define MX23_PAD_LCD_D04__GPO_1_4 MXS_IOMUX_PAD_NAKED(1, 4, PAD_MUXSEL_GPIO) +#define MX23_PAD_LCD_D05__GPO_1_5 MXS_IOMUX_PAD_NAKED(1, 5, PAD_MUXSEL_GPIO) +#define MX23_PAD_LCD_D06__GPO_1_6 MXS_IOMUX_PAD_NAKED(1, 6, PAD_MUXSEL_GPIO) +#define MX23_PAD_LCD_D07__GPO_1_7 MXS_IOMUX_PAD_NAKED(1, 7, PAD_MUXSEL_GPIO) +#define MX23_PAD_LCD_D08__GPO_1_8 MXS_IOMUX_PAD_NAKED(1, 8, PAD_MUXSEL_GPIO) +#define MX23_PAD_LCD_D09__GPO_1_9 MXS_IOMUX_PAD_NAKED(1, 9, PAD_MUXSEL_GPIO) +#define MX23_PAD_LCD_D10__GPO_1_10 MXS_IOMUX_PAD_NAKED(1, 10, PAD_MUXSEL_GPIO) +#define MX23_PAD_LCD_D11__GPO_1_11 MXS_IOMUX_PAD_NAKED(1, 11, PAD_MUXSEL_GPIO) +#define MX23_PAD_LCD_D12__GPO_1_12 MXS_IOMUX_PAD_NAKED(1, 12, PAD_MUXSEL_GPIO) +#define MX23_PAD_LCD_D13__GPO_1_13 MXS_IOMUX_PAD_NAKED(1, 13, PAD_MUXSEL_GPIO) +#define MX23_PAD_LCD_D14__GPO_1_14 MXS_IOMUX_PAD_NAKED(1, 14, PAD_MUXSEL_GPIO) +#define MX23_PAD_LCD_D15__GPO_1_15 MXS_IOMUX_PAD_NAKED(1, 15, PAD_MUXSEL_GPIO) +#define MX23_PAD_LCD_D16__GPO_1_16 MXS_IOMUX_PAD_NAKED(1, 16, PAD_MUXSEL_GPIO) +#define MX23_PAD_LCD_D17__GPO_1_17 MXS_IOMUX_PAD_NAKED(1, 17, PAD_MUXSEL_GPIO) +#define MX23_PAD_LCD_RESET__GPO_1_18 MXS_IOMUX_PAD_NAKED(1, 18, PAD_MUXSEL_GPIO) +#define MX23_PAD_LCD_RS__GPO_1_19 MXS_IOMUX_PAD_NAKED(1, 19, PAD_MUXSEL_GPIO) +#define MX23_PAD_LCD_WR__GPO_1_20 MXS_IOMUX_PAD_NAKED(1, 20, PAD_MUXSEL_GPIO) +#define MX23_PAD_LCD_CS__GPO_1_21 MXS_IOMUX_PAD_NAKED(1, 21, PAD_MUXSEL_GPIO) +#define MX23_PAD_LCD_DOTCK__GPO_1_22 MXS_IOMUX_PAD_NAKED(1, 22, PAD_MUXSEL_GPIO) +#define MX23_PAD_LCD_ENABLE__GPO_1_23 MXS_IOMUX_PAD_NAKED(1, 23, PAD_MUXSEL_GPIO) +#define MX23_PAD_LCD_HSYNC__GPO_1_24 MXS_IOMUX_PAD_NAKED(1, 24, PAD_MUXSEL_GPIO) +#define MX23_PAD_LCD_VSYNC__GPO_1_25 MXS_IOMUX_PAD_NAKED(1, 25, PAD_MUXSEL_GPIO) +#define MX23_PAD_PWM0__GPO_1_26 MXS_IOMUX_PAD_NAKED(1, 26, PAD_MUXSEL_GPIO) +#define MX23_PAD_PWM1__GPO_1_27 MXS_IOMUX_PAD_NAKED(1, 27, PAD_MUXSEL_GPIO) +#define MX23_PAD_PWM2__GPO_1_28 MXS_IOMUX_PAD_NAKED(1, 28, PAD_MUXSEL_GPIO) +#define MX23_PAD_PWM3__GPO_1_29 MXS_IOMUX_PAD_NAKED(1, 29, PAD_MUXSEL_GPIO) +#define MX23_PAD_PWM4__GPO_1_30 MXS_IOMUX_PAD_NAKED(1, 30, PAD_MUXSEL_GPIO) + +#define MX23_PAD_SSP1_CMD__GPO_2_0 MXS_IOMUX_PAD_NAKED(2, 0, PAD_MUXSEL_GPIO) +#define MX23_PAD_SSP1_DETECT__GPO_2_1 MXS_IOMUX_PAD_NAKED(2, 1, PAD_MUXSEL_GPIO) +#define MX23_PAD_SSP1_DATA0__GPO_2_2 MXS_IOMUX_PAD_NAKED(2, 2, PAD_MUXSEL_GPIO) +#define MX23_PAD_SSP1_DATA1__GPO_2_3 MXS_IOMUX_PAD_NAKED(2, 3, PAD_MUXSEL_GPIO) +#define MX23_PAD_SSP1_DATA2__GPO_2_4 MXS_IOMUX_PAD_NAKED(2, 4, PAD_MUXSEL_GPIO) +#define MX23_PAD_SSP1_DATA3__GPO_2_5 MXS_IOMUX_PAD_NAKED(2, 5, PAD_MUXSEL_GPIO) +#define MX23_PAD_SSP1_SCK__GPO_2_6 MXS_IOMUX_PAD_NAKED(2, 6, PAD_MUXSEL_GPIO) +#define MX23_PAD_ROTARYA__GPO_2_7 MXS_IOMUX_PAD_NAKED(2, 7, PAD_MUXSEL_GPIO) +#define MX23_PAD_ROTARYB__GPO_2_8 MXS_IOMUX_PAD_NAKED(2, 8, PAD_MUXSEL_GPIO) +#define MX23_PAD_EMI_A00__GPO_2_9 MXS_IOMUX_PAD_NAKED(2, 9, PAD_MUXSEL_GPIO) +#define MX23_PAD_EMI_A01__GPO_2_10 MXS_IOMUX_PAD_NAKED(2, 10, PAD_MUXSEL_GPIO) +#define MX23_PAD_EMI_A02__GPO_2_11 MXS_IOMUX_PAD_NAKED(2, 11, PAD_MUXSEL_GPIO) +#define MX23_PAD_EMI_A03__GPO_2_12 MXS_IOMUX_PAD_NAKED(2, 12, PAD_MUXSEL_GPIO) +#define MX23_PAD_EMI_A04__GPO_2_13 MXS_IOMUX_PAD_NAKED(2, 13, PAD_MUXSEL_GPIO) +#define MX23_PAD_EMI_A05__GPO_2_14 MXS_IOMUX_PAD_NAKED(2, 14, PAD_MUXSEL_GPIO) +#define MX23_PAD_EMI_A06__GPO_2_15 MXS_IOMUX_PAD_NAKED(2, 15, PAD_MUXSEL_GPIO) +#define MX23_PAD_EMI_A07__GPO_2_16 MXS_IOMUX_PAD_NAKED(2, 16, PAD_MUXSEL_GPIO) +#define MX23_PAD_EMI_A08__GPO_2_17 MXS_IOMUX_PAD_NAKED(2, 17, PAD_MUXSEL_GPIO) +#define MX23_PAD_EMI_A09__GPO_2_18 MXS_IOMUX_PAD_NAKED(2, 18, PAD_MUXSEL_GPIO) +#define MX23_PAD_EMI_A10__GPO_2_19 MXS_IOMUX_PAD_NAKED(2, 19, PAD_MUXSEL_GPIO) +#define MX23_PAD_EMI_A11__GPO_2_20 MXS_IOMUX_PAD_NAKED(2, 20, PAD_MUXSEL_GPIO) +#define MX23_PAD_EMI_A12__GPO_2_21 MXS_IOMUX_PAD_NAKED(2, 21, PAD_MUXSEL_GPIO) +#define MX23_PAD_EMI_BA0__GPO_2_22 MXS_IOMUX_PAD_NAKED(2, 22, PAD_MUXSEL_GPIO) +#define MX23_PAD_EMI_BA1__GPO_2_23 MXS_IOMUX_PAD_NAKED(2, 23, PAD_MUXSEL_GPIO) +#define MX23_PAD_EMI_CASN__GPO_2_24 MXS_IOMUX_PAD_NAKED(2, 24, PAD_MUXSEL_GPIO) +#define MX23_PAD_EMI_CE0N__GPO_2_25 MXS_IOMUX_PAD_NAKED(2, 25, PAD_MUXSEL_GPIO) +#define MX23_PAD_EMI_CE1N__GPO_2_26 MXS_IOMUX_PAD_NAKED(2, 26, PAD_MUXSEL_GPIO) +#define MX23_PAD_GPMI_CE1N__GPO_2_27 MXS_IOMUX_PAD_NAKED(2, 27, PAD_MUXSEL_GPIO) +#define MX23_PAD_GPMI_CE0N__GPO_2_28 MXS_IOMUX_PAD_NAKED(2, 28, PAD_MUXSEL_GPIO) +#define MX23_PAD_EMI_CKE__GPO_2_29 MXS_IOMUX_PAD_NAKED(2, 29, PAD_MUXSEL_GPIO) +#define MX23_PAD_EMI_RASN__GPO_2_30 MXS_IOMUX_PAD_NAKED(2, 30, PAD_MUXSEL_GPIO) +#define MX23_PAD_EMI_WEN__GPO_2_31 MXS_IOMUX_PAD_NAKED(2, 31, PAD_MUXSEL_GPIO) + +#endif /* __MACH_IOMUX_MX23_H__ */ diff --git a/arch/arm/mach-mxs/include/mach/iomux-mx28.h b/arch/arm/mach-mxs/include/mach/iomux-mx28.h new file mode 100644 index 00000000000..f50fefd1052 --- /dev/null +++ b/arch/arm/mach-mxs/include/mach/iomux-mx28.h @@ -0,0 +1,537 @@ +/* + * Copyright (C) 2009-2010 Amit Kucheria <amit.kucheria@canonical.com> + * Copyright (C) 2010 Freescale Semiconductor, Inc. + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#ifndef __MACH_IOMUX_MX28_H__ +#define __MACH_IOMUX_MX28_H__ + +#include <mach/iomux.h> + +/* + * The naming convention for the pad modes is MX28_PAD_<padname>__<padmode> + * If <padname> or <padmode> refers to a GPIO, it is named GPIO_<unit>_<num> + * See also iomux.h + * + * BANK PIN MUX + */ +/* MUXSEL_0 */ +#define MX28_PAD_GPMI_D00__GPMI_D0 MXS_IOMUX_PAD_NAKED(0, 0, PAD_MUXSEL_0) +#define MX28_PAD_GPMI_D01__GPMI_D1 MXS_IOMUX_PAD_NAKED(0, 1, PAD_MUXSEL_0) +#define MX28_PAD_GPMI_D02__GPMI_D2 MXS_IOMUX_PAD_NAKED(0, 2, PAD_MUXSEL_0) +#define MX28_PAD_GPMI_D03__GPMI_D3 MXS_IOMUX_PAD_NAKED(0, 3, PAD_MUXSEL_0) +#define MX28_PAD_GPMI_D04__GPMI_D4 MXS_IOMUX_PAD_NAKED(0, 4, PAD_MUXSEL_0) +#define MX28_PAD_GPMI_D05__GPMI_D5 MXS_IOMUX_PAD_NAKED(0, 5, PAD_MUXSEL_0) +#define MX28_PAD_GPMI_D06__GPMI_D6 MXS_IOMUX_PAD_NAKED(0, 6, PAD_MUXSEL_0) +#define MX28_PAD_GPMI_D07__GPMI_D7 MXS_IOMUX_PAD_NAKED(0, 7, PAD_MUXSEL_0) +#define MX28_PAD_GPMI_CE0N__GPMI_CE0N MXS_IOMUX_PAD_NAKED(0, 16, PAD_MUXSEL_0) +#define MX28_PAD_GPMI_CE1N__GPMI_CE1N MXS_IOMUX_PAD_NAKED(0, 17, PAD_MUXSEL_0) +#define MX28_PAD_GPMI_CE2N__GPMI_CE2N MXS_IOMUX_PAD_NAKED(0, 18, PAD_MUXSEL_0) +#define MX28_PAD_GPMI_CE3N__GPMI_CE3N MXS_IOMUX_PAD_NAKED(0, 19, PAD_MUXSEL_0) +#define MX28_PAD_GPMI_RDY0__GPMI_READY0 MXS_IOMUX_PAD_NAKED(0, 20, PAD_MUXSEL_0) +#define MX28_PAD_GPMI_RDY1__GPMI_READY1 MXS_IOMUX_PAD_NAKED(0, 21, PAD_MUXSEL_0) +#define MX28_PAD_GPMI_RDY2__GPMI_READY2 MXS_IOMUX_PAD_NAKED(0, 22, PAD_MUXSEL_0) +#define MX28_PAD_GPMI_RDY3__GPMI_READY3 MXS_IOMUX_PAD_NAKED(0, 23, PAD_MUXSEL_0) +#define MX28_PAD_GPMI_RDN__GPMI_RDN MXS_IOMUX_PAD_NAKED(0, 24, PAD_MUXSEL_0) +#define MX28_PAD_GPMI_WRN__GPMI_WRN MXS_IOMUX_PAD_NAKED(0, 25, PAD_MUXSEL_0) +#define MX28_PAD_GPMI_ALE__GPMI_ALE MXS_IOMUX_PAD_NAKED(0, 26, PAD_MUXSEL_0) +#define MX28_PAD_GPMI_CLE__GPMI_CLE MXS_IOMUX_PAD_NAKED(0, 27, PAD_MUXSEL_0) +#define MX28_PAD_GPMI_RESETN__GPMI_RESETN MXS_IOMUX_PAD_NAKED(0, 28, PAD_MUXSEL_0) + +#define MX28_PAD_LCD_D00__LCD_D0 MXS_IOMUX_PAD_NAKED(1, 0, PAD_MUXSEL_0) +#define MX28_PAD_LCD_D01__LCD_D1 MXS_IOMUX_PAD_NAKED(1, 1, PAD_MUXSEL_0) +#define MX28_PAD_LCD_D02__LCD_D2 MXS_IOMUX_PAD_NAKED(1, 2, PAD_MUXSEL_0) +#define MX28_PAD_LCD_D03__LCD_D3 MXS_IOMUX_PAD_NAKED(1, 3, PAD_MUXSEL_0) +#define MX28_PAD_LCD_D04__LCD_D4 MXS_IOMUX_PAD_NAKED(1, 4, PAD_MUXSEL_0) +#define MX28_PAD_LCD_D05__LCD_D5 MXS_IOMUX_PAD_NAKED(1, 5, PAD_MUXSEL_0) +#define MX28_PAD_LCD_D06__LCD_D6 MXS_IOMUX_PAD_NAKED(1, 6, PAD_MUXSEL_0) +#define MX28_PAD_LCD_D07__LCD_D7 MXS_IOMUX_PAD_NAKED(1, 7, PAD_MUXSEL_0) +#define MX28_PAD_LCD_D08__LCD_D8 MXS_IOMUX_PAD_NAKED(1, 8, PAD_MUXSEL_0) +#define MX28_PAD_LCD_D09__LCD_D9 MXS_IOMUX_PAD_NAKED(1, 9, PAD_MUXSEL_0) +#define MX28_PAD_LCD_D10__LCD_D10 MXS_IOMUX_PAD_NAKED(1, 10, PAD_MUXSEL_0) +#define MX28_PAD_LCD_D11__LCD_D11 MXS_IOMUX_PAD_NAKED(1, 11, PAD_MUXSEL_0) +#define MX28_PAD_LCD_D12__LCD_D12 MXS_IOMUX_PAD_NAKED(1, 12, PAD_MUXSEL_0) +#define MX28_PAD_LCD_D13__LCD_D13 MXS_IOMUX_PAD_NAKED(1, 13, PAD_MUXSEL_0) +#define MX28_PAD_LCD_D14__LCD_D14 MXS_IOMUX_PAD_NAKED(1, 14, PAD_MUXSEL_0) +#define MX28_PAD_LCD_D15__LCD_D15 MXS_IOMUX_PAD_NAKED(1, 15, PAD_MUXSEL_0) +#define MX28_PAD_LCD_D16__LCD_D16 MXS_IOMUX_PAD_NAKED(1, 16, PAD_MUXSEL_0) +#define MX28_PAD_LCD_D17__LCD_D17 MXS_IOMUX_PAD_NAKED(1, 17, PAD_MUXSEL_0) +#define MX28_PAD_LCD_D18__LCD_D18 MXS_IOMUX_PAD_NAKED(1, 18, PAD_MUXSEL_0) +#define MX28_PAD_LCD_D19__LCD_D19 MXS_IOMUX_PAD_NAKED(1, 19, PAD_MUXSEL_0) +#define MX28_PAD_LCD_D20__LCD_D20 MXS_IOMUX_PAD_NAKED(1, 20, PAD_MUXSEL_0) +#define MX28_PAD_LCD_D21__LCD_D21 MXS_IOMUX_PAD_NAKED(1, 21, PAD_MUXSEL_0) +#define MX28_PAD_LCD_D22__LCD_D22 MXS_IOMUX_PAD_NAKED(1, 22, PAD_MUXSEL_0) +#define MX28_PAD_LCD_D23__LCD_D23 MXS_IOMUX_PAD_NAKED(1, 23, PAD_MUXSEL_0) +#define MX28_PAD_LCD_RD_E__LCD_RD_E MXS_IOMUX_PAD_NAKED(1, 24, PAD_MUXSEL_0) +#define MX28_PAD_LCD_WR_RWN__LCD_WR_RWN MXS_IOMUX_PAD_NAKED(1, 25, PAD_MUXSEL_0) +#define MX28_PAD_LCD_RS__LCD_RS MXS_IOMUX_PAD_NAKED(1, 26, PAD_MUXSEL_0) +#define MX28_PAD_LCD_CS__LCD_CS MXS_IOMUX_PAD_NAKED(1, 27, PAD_MUXSEL_0) +#define MX28_PAD_LCD_VSYNC__LCD_VSYNC MXS_IOMUX_PAD_NAKED(1, 28, PAD_MUXSEL_0) +#define MX28_PAD_LCD_HSYNC__LCD_HSYNC MXS_IOMUX_PAD_NAKED(1, 29, PAD_MUXSEL_0) +#define MX28_PAD_LCD_DOTCLK__LCD_DOTCLK MXS_IOMUX_PAD_NAKED(1, 30, PAD_MUXSEL_0) +#define MX28_PAD_LCD_ENABLE__LCD_ENABLE MXS_IOMUX_PAD_NAKED(1, 31, PAD_MUXSEL_0) + +#define MX28_PAD_SSP0_DATA0__SSP0_D0 MXS_IOMUX_PAD_NAKED(2, 0, PAD_MUXSEL_0) +#define MX28_PAD_SSP0_DATA1__SSP0_D1 MXS_IOMUX_PAD_NAKED(2, 1, PAD_MUXSEL_0) +#define MX28_PAD_SSP0_DATA2__SSP0_D2 MXS_IOMUX_PAD_NAKED(2, 2, PAD_MUXSEL_0) +#define MX28_PAD_SSP0_DATA3__SSP0_D3 MXS_IOMUX_PAD_NAKED(2, 3, PAD_MUXSEL_0) +#define MX28_PAD_SSP0_DATA4__SSP0_D4 MXS_IOMUX_PAD_NAKED(2, 4, PAD_MUXSEL_0) +#define MX28_PAD_SSP0_DATA5__SSP0_D5 MXS_IOMUX_PAD_NAKED(2, 5, PAD_MUXSEL_0) +#define MX28_PAD_SSP0_DATA6__SSP0_D6 MXS_IOMUX_PAD_NAKED(2, 6, PAD_MUXSEL_0) +#define MX28_PAD_SSP0_DATA7__SSP0_D7 MXS_IOMUX_PAD_NAKED(2, 7, PAD_MUXSEL_0) +#define MX28_PAD_SSP0_CMD__SSP0_CMD MXS_IOMUX_PAD_NAKED(2, 8, PAD_MUXSEL_0) +#define MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT MXS_IOMUX_PAD_NAKED(2, 9, PAD_MUXSEL_0) +#define MX28_PAD_SSP0_SCK__SSP0_SCK MXS_IOMUX_PAD_NAKED(2, 10, PAD_MUXSEL_0) +#define MX28_PAD_SSP1_SCK__SSP1_SCK MXS_IOMUX_PAD_NAKED(2, 12, PAD_MUXSEL_0) +#define MX28_PAD_SSP1_CMD__SSP1_CMD MXS_IOMUX_PAD_NAKED(2, 13, PAD_MUXSEL_0) +#define MX28_PAD_SSP1_DATA0__SSP1_D0 MXS_IOMUX_PAD_NAKED(2, 14, PAD_MUXSEL_0) +#define MX28_PAD_SSP1_DATA3__SSP1_D3 MXS_IOMUX_PAD_NAKED(2, 15, PAD_MUXSEL_0) +#define MX28_PAD_SSP2_SCK__SSP2_SCK MXS_IOMUX_PAD_NAKED(2, 16, PAD_MUXSEL_0) +#define MX28_PAD_SSP2_MOSI__SSP2_CMD MXS_IOMUX_PAD_NAKED(2, 17, PAD_MUXSEL_0) +#define MX28_PAD_SSP2_MISO__SSP2_D0 MXS_IOMUX_PAD_NAKED(2, 18, PAD_MUXSEL_0) +#define MX28_PAD_SSP2_SS0__SSP2_D3 MXS_IOMUX_PAD_NAKED(2, 19, PAD_MUXSEL_0) +#define MX28_PAD_SSP2_SS1__SSP2_D4 MXS_IOMUX_PAD_NAKED(2, 20, PAD_MUXSEL_0) +#define MX28_PAD_SSP2_SS2__SSP2_D5 MXS_IOMUX_PAD_NAKED(2, 21, PAD_MUXSEL_0) +#define MX28_PAD_SSP3_SCK__SSP3_SCK MXS_IOMUX_PAD_NAKED(2, 24, PAD_MUXSEL_0) +#define MX28_PAD_SSP3_MOSI__SSP3_CMD MXS_IOMUX_PAD_NAKED(2, 25, PAD_MUXSEL_0) +#define MX28_PAD_SSP3_MISO__SSP3_D0 MXS_IOMUX_PAD_NAKED(2, 26, PAD_MUXSEL_0) +#define MX28_PAD_SSP3_SS0__SSP3_D3 MXS_IOMUX_PAD_NAKED(2, 27, PAD_MUXSEL_0) + +#define MX28_PAD_AUART0_RX__AUART0_RX MXS_IOMUX_PAD_NAKED(3, 0, PAD_MUXSEL_0) +#define MX28_PAD_AUART0_TX__AUART0_TX MXS_IOMUX_PAD_NAKED(3, 1, PAD_MUXSEL_0) +#define MX28_PAD_AUART0_CTS__AUART0_CTS MXS_IOMUX_PAD_NAKED(3, 2, PAD_MUXSEL_0) +#define MX28_PAD_AUART0_RTS__AUART0_RTS MXS_IOMUX_PAD_NAKED(3, 3, PAD_MUXSEL_0) +#define MX28_PAD_AUART1_RX__AUART1_RX MXS_IOMUX_PAD_NAKED(3, 4, PAD_MUXSEL_0) +#define MX28_PAD_AUART1_TX__AUART1_TX MXS_IOMUX_PAD_NAKED(3, 5, PAD_MUXSEL_0) +#define MX28_PAD_AUART1_CTS__AUART1_CTS MXS_IOMUX_PAD_NAKED(3, 6, PAD_MUXSEL_0) +#define MX28_PAD_AUART1_RTS__AUART1_RTS MXS_IOMUX_PAD_NAKED(3, 7, PAD_MUXSEL_0) +#define MX28_PAD_AUART2_RX__AUART2_RX MXS_IOMUX_PAD_NAKED(3, 8, PAD_MUXSEL_0) +#define MX28_PAD_AUART2_TX__AUART2_TX MXS_IOMUX_PAD_NAKED(3, 9, PAD_MUXSEL_0) +#define MX28_PAD_AUART2_CTS__AUART2_CTS MXS_IOMUX_PAD_NAKED(3, 10, PAD_MUXSEL_0) +#define MX28_PAD_AUART2_RTS__AUART2_RTS MXS_IOMUX_PAD_NAKED(3, 11, PAD_MUXSEL_0) +#define MX28_PAD_AUART3_RX__AUART3_RX MXS_IOMUX_PAD_NAKED(3, 12, PAD_MUXSEL_0) +#define MX28_PAD_AUART3_TX__AUART3_TX MXS_IOMUX_PAD_NAKED(3, 13, PAD_MUXSEL_0) +#define MX28_PAD_AUART3_CTS__AUART3_CTS MXS_IOMUX_PAD_NAKED(3, 14, PAD_MUXSEL_0) +#define MX28_PAD_AUART3_RTS__AUART3_RTS MXS_IOMUX_PAD_NAKED(3, 15, PAD_MUXSEL_0) +#define MX28_PAD_PWM0__PWM_0 MXS_IOMUX_PAD_NAKED(3, 16, PAD_MUXSEL_0) +#define MX28_PAD_PWM1__PWM_1 MXS_IOMUX_PAD_NAKED(3, 17, PAD_MUXSEL_0) +#define MX28_PAD_PWM2__PWM_2 MXS_IOMUX_PAD_NAKED(3, 18, PAD_MUXSEL_0) +#define MX28_PAD_SAIF0_MCLK__SAIF0_MCLK MXS_IOMUX_PAD_NAKED(3, 20, PAD_MUXSEL_0) +#define MX28_PAD_SAIF0_LRCLK__SAIF0_LRCLK MXS_IOMUX_PAD_NAKED(3, 21, PAD_MUXSEL_0) +#define MX28_PAD_SAIF0_BITCLK__SAIF0_BITCLK MXS_IOMUX_PAD_NAKED(3, 22, PAD_MUXSEL_0) +#define MX28_PAD_SAIF0_SDATA0__SAIF0_SDATA0 MXS_IOMUX_PAD_NAKED(3, 23, PAD_MUXSEL_0) +#define MX28_PAD_I2C0_SCL__I2C0_SCL MXS_IOMUX_PAD_NAKED(3, 24, PAD_MUXSEL_0) +#define MX28_PAD_I2C0_SDA__I2C0_SDA MXS_IOMUX_PAD_NAKED(3, 25, PAD_MUXSEL_0) +#define MX28_PAD_SAIF1_SDATA0__SAIF1_SDATA0 MXS_IOMUX_PAD_NAKED(3, 26, PAD_MUXSEL_0) +#define MX28_PAD_SPDIF__SPDIF_TX MXS_IOMUX_PAD_NAKED(3, 27, PAD_MUXSEL_0) +#define MX28_PAD_PWM3__PWM_3 MXS_IOMUX_PAD_NAKED(3, 28, PAD_MUXSEL_0) +#define MX28_PAD_PWM4__PWM_4 MXS_IOMUX_PAD_NAKED(3, 29, PAD_MUXSEL_0) +#define MX28_PAD_LCD_RESET__LCD_RESET MXS_IOMUX_PAD_NAKED(3, 30, PAD_MUXSEL_0) + +#define MX28_PAD_ENET0_MDC__ENET0_MDC MXS_IOMUX_PAD_NAKED(4, 0, PAD_MUXSEL_0) +#define MX28_PAD_ENET0_MDIO__ENET0_MDIO MXS_IOMUX_PAD_NAKED(4, 1, PAD_MUXSEL_0) +#define MX28_PAD_ENET0_RX_EN__ENET0_RX_EN MXS_IOMUX_PAD_NAKED(4, 2, PAD_MUXSEL_0) +#define MX28_PAD_ENET0_RXD0__ENET0_RXD0 MXS_IOMUX_PAD_NAKED(4, 3, PAD_MUXSEL_0) +#define MX28_PAD_ENET0_RXD1__ENET0_RXD1 MXS_IOMUX_PAD_NAKED(4, 4, PAD_MUXSEL_0) +#define MX28_PAD_ENET0_TX_CLK__ENET0_TX_CLK MXS_IOMUX_PAD_NAKED(4, 5, PAD_MUXSEL_0) +#define MX28_PAD_ENET0_TX_EN__ENET0_TX_EN MXS_IOMUX_PAD_NAKED(4, 6, PAD_MUXSEL_0) +#define MX28_PAD_ENET0_TXD0__ENET0_TXD0 MXS_IOMUX_PAD_NAKED(4, 7, PAD_MUXSEL_0) +#define MX28_PAD_ENET0_TXD1__ENET0_TXD1 MXS_IOMUX_PAD_NAKED(4, 8, PAD_MUXSEL_0) +#define MX28_PAD_ENET0_RXD2__ENET0_RXD2 MXS_IOMUX_PAD_NAKED(4, 9, PAD_MUXSEL_0) +#define MX28_PAD_ENET0_RXD3__ENET0_RXD3 MXS_IOMUX_PAD_NAKED(4, 10, PAD_MUXSEL_0) +#define MX28_PAD_ENET0_TXD2__ENET0_TXD2 MXS_IOMUX_PAD_NAKED(4, 11, PAD_MUXSEL_0) +#define MX28_PAD_ENET0_TXD3__ENET0_TXD3 MXS_IOMUX_PAD_NAKED(4, 12, PAD_MUXSEL_0) +#define MX28_PAD_ENET0_RX_CLK__ENET0_RX_CLK MXS_IOMUX_PAD_NAKED(4, 13, PAD_MUXSEL_0) +#define MX28_PAD_ENET0_COL__ENET0_COL MXS_IOMUX_PAD_NAKED(4, 14, PAD_MUXSEL_0) +#define MX28_PAD_ENET0_CRS__ENET0_CRS MXS_IOMUX_PAD_NAKED(4, 15, PAD_MUXSEL_0) +#define MX28_PAD_ENET_CLK__CLKCTRL_ENET MXS_IOMUX_PAD_NAKED(4, 16, PAD_MUXSEL_0) +#define MX28_PAD_JTAG_RTCK__JTAG_RTCK MXS_IOMUX_PAD_NAKED(4, 20, PAD_MUXSEL_0) + +#define MX28_PAD_EMI_D00__EMI_DATA0 MXS_IOMUX_PAD_NAKED(5, 0, PAD_MUXSEL_0) +#define MX28_PAD_EMI_D01__EMI_DATA1 MXS_IOMUX_PAD_NAKED(5, 1, PAD_MUXSEL_0) +#define MX28_PAD_EMI_D02__EMI_DATA2 MXS_IOMUX_PAD_NAKED(5, 2, PAD_MUXSEL_0) +#define MX28_PAD_EMI_D03__EMI_DATA3 MXS_IOMUX_PAD_NAKED(5, 3, PAD_MUXSEL_0) +#define MX28_PAD_EMI_D04__EMI_DATA4 MXS_IOMUX_PAD_NAKED(5, 4, PAD_MUXSEL_0) +#define MX28_PAD_EMI_D05__EMI_DATA5 MXS_IOMUX_PAD_NAKED(5, 5, PAD_MUXSEL_0) +#define MX28_PAD_EMI_D06__EMI_DATA6 MXS_IOMUX_PAD_NAKED(5, 6, PAD_MUXSEL_0) +#define MX28_PAD_EMI_D07__EMI_DATA7 MXS_IOMUX_PAD_NAKED(5, 7, PAD_MUXSEL_0) +#define MX28_PAD_EMI_D08__EMI_DATA8 MXS_IOMUX_PAD_NAKED(5, 8, PAD_MUXSEL_0) +#define MX28_PAD_EMI_D09__EMI_DATA9 MXS_IOMUX_PAD_NAKED(5, 9, PAD_MUXSEL_0) +#define MX28_PAD_EMI_D10__EMI_DATA10 MXS_IOMUX_PAD_NAKED(5, 10, PAD_MUXSEL_0) +#define MX28_PAD_EMI_D11__EMI_DATA11 MXS_IOMUX_PAD_NAKED(5, 11, PAD_MUXSEL_0) +#define MX28_PAD_EMI_D12__EMI_DATA12 MXS_IOMUX_PAD_NAKED(5, 12, PAD_MUXSEL_0) +#define MX28_PAD_EMI_D13__EMI_DATA13 MXS_IOMUX_PAD_NAKED(5, 13, PAD_MUXSEL_0) +#define MX28_PAD_EMI_D14__EMI_DATA14 MXS_IOMUX_PAD_NAKED(5, 14, PAD_MUXSEL_0) +#define MX28_PAD_EMI_D15__EMI_DATA15 MXS_IOMUX_PAD_NAKED(5, 15, PAD_MUXSEL_0) +#define MX28_PAD_EMI_ODT0__EMI_ODT0 MXS_IOMUX_PAD_NAKED(5, 16, PAD_MUXSEL_0) +#define MX28_PAD_EMI_DQM0__EMI_DQM0 MXS_IOMUX_PAD_NAKED(5, 17, PAD_MUXSEL_0) +#define MX28_PAD_EMI_ODT1__EMI_ODT1 MXS_IOMUX_PAD_NAKED(5, 18, PAD_MUXSEL_0) +#define MX28_PAD_EMI_DQM1__EMI_DQM1 MXS_IOMUX_PAD_NAKED(5, 19, PAD_MUXSEL_0) +#define MX28_PAD_EMI_DDR_OPEN_FB__EMI_DDR_OPEN_FEEDBACK MXS_IOMUX_PAD_NAKED(5, 20, PAD_MUXSEL_0) +#define MX28_PAD_EMI_CLK__EMI_CLK MXS_IOMUX_PAD_NAKED(5, 21, PAD_MUXSEL_0) +#define MX28_PAD_EMI_DQS0__EMI_DQS0 MXS_IOMUX_PAD_NAKED(5, 22, PAD_MUXSEL_0) +#define MX28_PAD_EMI_DQS1__EMI_DQS1 MXS_IOMUX_PAD_NAKED(5, 23, PAD_MUXSEL_0) +#define MX28_PAD_EMI_DDR_OPEN__EMI_DDR_OPEN MXS_IOMUX_PAD_NAKED(5, 26, PAD_MUXSEL_0) + +#define MX28_PAD_EMI_A00__EMI_ADDR0 MXS_IOMUX_PAD_NAKED(6, 0, PAD_MUXSEL_0) +#define MX28_PAD_EMI_A01__EMI_ADDR1 MXS_IOMUX_PAD_NAKED(6, 1, PAD_MUXSEL_0) +#define MX28_PAD_EMI_A02__EMI_ADDR2 MXS_IOMUX_PAD_NAKED(6, 2, PAD_MUXSEL_0) +#define MX28_PAD_EMI_A03__EMI_ADDR3 MXS_IOMUX_PAD_NAKED(6, 3, PAD_MUXSEL_0) +#define MX28_PAD_EMI_A04__EMI_ADDR4 MXS_IOMUX_PAD_NAKED(6, 4, PAD_MUXSEL_0) +#define MX28_PAD_EMI_A05__EMI_ADDR5 MXS_IOMUX_PAD_NAKED(6, 5, PAD_MUXSEL_0) +#define MX28_PAD_EMI_A06__EMI_ADDR6 MXS_IOMUX_PAD_NAKED(6, 6, PAD_MUXSEL_0) +#define MX28_PAD_EMI_A07__EMI_ADDR7 MXS_IOMUX_PAD_NAKED(6, 7, PAD_MUXSEL_0) +#define MX28_PAD_EMI_A08__EMI_ADDR8 MXS_IOMUX_PAD_NAKED(6, 8, PAD_MUXSEL_0) +#define MX28_PAD_EMI_A09__EMI_ADDR9 MXS_IOMUX_PAD_NAKED(6, 9, PAD_MUXSEL_0) +#define MX28_PAD_EMI_A10__EMI_ADDR10 MXS_IOMUX_PAD_NAKED(6, 10, PAD_MUXSEL_0) +#define MX28_PAD_EMI_A11__EMI_ADDR11 MXS_IOMUX_PAD_NAKED(6, 11, PAD_MUXSEL_0) +#define MX28_PAD_EMI_A12__EMI_ADDR12 MXS_IOMUX_PAD_NAKED(6, 12, PAD_MUXSEL_0) +#define MX28_PAD_EMI_A13__EMI_ADDR13 MXS_IOMUX_PAD_NAKED(6, 13, PAD_MUXSEL_0) +#define MX28_PAD_EMI_A14__EMI_ADDR14 MXS_IOMUX_PAD_NAKED(6, 14, PAD_MUXSEL_0) +#define MX28_PAD_EMI_BA0__EMI_BA0 MXS_IOMUX_PAD_NAKED(6, 16, PAD_MUXSEL_0) +#define MX28_PAD_EMI_BA1__EMI_BA1 MXS_IOMUX_PAD_NAKED(6, 17, PAD_MUXSEL_0) +#define MX28_PAD_EMI_BA2__EMI_BA2 MXS_IOMUX_PAD_NAKED(6, 18, PAD_MUXSEL_0) +#define MX28_PAD_EMI_CASN__EMI_CASN MXS_IOMUX_PAD_NAKED(6, 19, PAD_MUXSEL_0) +#define MX28_PAD_EMI_RASN__EMI_RASN MXS_IOMUX_PAD_NAKED(6, 20, PAD_MUXSEL_0) +#define MX28_PAD_EMI_WEN__EMI_WEN MXS_IOMUX_PAD_NAKED(6, 21, PAD_MUXSEL_0) +#define MX28_PAD_EMI_CE0N__EMI_CE0N MXS_IOMUX_PAD_NAKED(6, 22, PAD_MUXSEL_0) +#define MX28_PAD_EMI_CE1N__EMI_CE1N MXS_IOMUX_PAD_NAKED(6, 23, PAD_MUXSEL_0) +#define MX28_PAD_EMI_CKE__EMI_CKE MXS_IOMUX_PAD_NAKED(6, 24, PAD_MUXSEL_0) + +/* MUXSEL_1 */ +#define MX28_PAD_GPMI_D00__SSP1_D0 MXS_IOMUX_PAD_NAKED(0, 0, PAD_MUXSEL_1) +#define MX28_PAD_GPMI_D01__SSP1_D1 MXS_IOMUX_PAD_NAKED(0, 1, PAD_MUXSEL_1) +#define MX28_PAD_GPMI_D02__SSP1_D2 MXS_IOMUX_PAD_NAKED(0, 2, PAD_MUXSEL_1) +#define MX28_PAD_GPMI_D03__SSP1_D3 MXS_IOMUX_PAD_NAKED(0, 3, PAD_MUXSEL_1) +#define MX28_PAD_GPMI_D04__SSP1_D4 MXS_IOMUX_PAD_NAKED(0, 4, PAD_MUXSEL_1) +#define MX28_PAD_GPMI_D05__SSP1_D5 MXS_IOMUX_PAD_NAKED(0, 5, PAD_MUXSEL_1) +#define MX28_PAD_GPMI_D06__SSP1_D6 MXS_IOMUX_PAD_NAKED(0, 6, PAD_MUXSEL_1) +#define MX28_PAD_GPMI_D07__SSP1_D7 MXS_IOMUX_PAD_NAKED(0, 7, PAD_MUXSEL_1) +#define MX28_PAD_GPMI_CE0N__SSP3_D0 MXS_IOMUX_PAD_NAKED(0, 16, PAD_MUXSEL_1) +#define MX28_PAD_GPMI_CE1N__SSP3_D3 MXS_IOMUX_PAD_NAKED(0, 17, PAD_MUXSEL_1) +#define MX28_PAD_GPMI_CE2N__CAN1_TX MXS_IOMUX_PAD_NAKED(0, 18, PAD_MUXSEL_1) +#define MX28_PAD_GPMI_CE3N__CAN1_RX MXS_IOMUX_PAD_NAKED(0, 19, PAD_MUXSEL_1) +#define MX28_PAD_GPMI_RDY0__SSP1_CARD_DETECT MXS_IOMUX_PAD_NAKED(0, 20, PAD_MUXSEL_1) +#define MX28_PAD_GPMI_RDY1__SSP1_CMD MXS_IOMUX_PAD_NAKED(0, 21, PAD_MUXSEL_1) +#define MX28_PAD_GPMI_RDY2__CAN0_TX MXS_IOMUX_PAD_NAKED(0, 22, PAD_MUXSEL_1) +#define MX28_PAD_GPMI_RDY3__CAN0_RX MXS_IOMUX_PAD_NAKED(0, 23, PAD_MUXSEL_1) +#define MX28_PAD_GPMI_RDN__SSP3_SCK MXS_IOMUX_PAD_NAKED(0, 24, PAD_MUXSEL_1) +#define MX28_PAD_GPMI_WRN__SSP1_SCK MXS_IOMUX_PAD_NAKED(0, 25, PAD_MUXSEL_1) +#define MX28_PAD_GPMI_ALE__SSP3_D1 MXS_IOMUX_PAD_NAKED(0, 26, PAD_MUXSEL_1) +#define MX28_PAD_GPMI_CLE__SSP3_D2 MXS_IOMUX_PAD_NAKED(0, 27, PAD_MUXSEL_1) +#define MX28_PAD_GPMI_RESETN__SSP3_CMD MXS_IOMUX_PAD_NAKED(0, 28, PAD_MUXSEL_1) + +#define MX28_PAD_LCD_D03__ETM_DA8 MXS_IOMUX_PAD_NAKED(1, 3, PAD_MUXSEL_1) +#define MX28_PAD_LCD_D04__ETM_DA9 MXS_IOMUX_PAD_NAKED(1, 4, PAD_MUXSEL_1) +#define MX28_PAD_LCD_D08__ETM_DA3 MXS_IOMUX_PAD_NAKED(1, 8, PAD_MUXSEL_1) +#define MX28_PAD_LCD_D09__ETM_DA4 MXS_IOMUX_PAD_NAKED(1, 9, PAD_MUXSEL_1) +#define MX28_PAD_LCD_D20__ENET1_1588_EVENT2_OUT MXS_IOMUX_PAD_NAKED(1, 20, PAD_MUXSEL_1) +#define MX28_PAD_LCD_D21__ENET1_1588_EVENT2_IN MXS_IOMUX_PAD_NAKED(1, 21, PAD_MUXSEL_1) +#define MX28_PAD_LCD_D22__ENET1_1588_EVENT3_OUT MXS_IOMUX_PAD_NAKED(1, 22, PAD_MUXSEL_1) +#define MX28_PAD_LCD_D23__ENET1_1588_EVENT3_IN MXS_IOMUX_PAD_NAKED(1, 23, PAD_MUXSEL_1) +#define MX28_PAD_LCD_RD_E__LCD_VSYNC MXS_IOMUX_PAD_NAKED(1, 24, PAD_MUXSEL_1) +#define MX28_PAD_LCD_WR_RWN__LCD_HSYNC MXS_IOMUX_PAD_NAKED(1, 25, PAD_MUXSEL_1) +#define MX28_PAD_LCD_RS__LCD_DOTCLK MXS_IOMUX_PAD_NAKED(1, 26, PAD_MUXSEL_1) +#define MX28_PAD_LCD_CS__LCD_ENABLE MXS_IOMUX_PAD_NAKED(1, 27, PAD_MUXSEL_1) +#define MX28_PAD_LCD_VSYNC__SAIF1_SDATA0 MXS_IOMUX_PAD_NAKED(1, 28, PAD_MUXSEL_1) +#define MX28_PAD_LCD_HSYNC__SAIF1_SDATA1 MXS_IOMUX_PAD_NAKED(1, 29, PAD_MUXSEL_1) +#define MX28_PAD_LCD_DOTCLK__SAIF1_MCLK MXS_IOMUX_PAD_NAKED(1, 30, PAD_MUXSEL_1) + +#define MX28_PAD_SSP0_DATA4__SSP2_D0 MXS_IOMUX_PAD_NAKED(2, 4, PAD_MUXSEL_1) +#define MX28_PAD_SSP0_DATA5__SSP2_D3 MXS_IOMUX_PAD_NAKED(2, 5, PAD_MUXSEL_1) +#define MX28_PAD_SSP0_DATA6__SSP2_CMD MXS_IOMUX_PAD_NAKED(2, 6, PAD_MUXSEL_1) +#define MX28_PAD_SSP0_DATA7__SSP2_SCK MXS_IOMUX_PAD_NAKED(2, 7, PAD_MUXSEL_1) +#define MX28_PAD_SSP1_SCK__SSP2_D1 MXS_IOMUX_PAD_NAKED(2, 12, PAD_MUXSEL_1) +#define MX28_PAD_SSP1_CMD__SSP2_D2 MXS_IOMUX_PAD_NAKED(2, 13, PAD_MUXSEL_1) +#define MX28_PAD_SSP1_DATA0__SSP2_D6 MXS_IOMUX_PAD_NAKED(2, 14, PAD_MUXSEL_1) +#define MX28_PAD_SSP1_DATA3__SSP2_D7 MXS_IOMUX_PAD_NAKED(2, 15, PAD_MUXSEL_1) +#define MX28_PAD_SSP2_SCK__AUART2_RX MXS_IOMUX_PAD_NAKED(2, 16, PAD_MUXSEL_1) +#define MX28_PAD_SSP2_MOSI__AUART2_TX MXS_IOMUX_PAD_NAKED(2, 17, PAD_MUXSEL_1) +#define MX28_PAD_SSP2_MISO__AUART3_RX MXS_IOMUX_PAD_NAKED(2, 18, PAD_MUXSEL_1) +#define MX28_PAD_SSP2_SS0__AUART3_TX MXS_IOMUX_PAD_NAKED(2, 19, PAD_MUXSEL_1) +#define MX28_PAD_SSP2_SS1__SSP2_D1 MXS_IOMUX_PAD_NAKED(2, 20, PAD_MUXSEL_1) +#define MX28_PAD_SSP2_SS2__SSP2_D2 MXS_IOMUX_PAD_NAKED(2, 21, PAD_MUXSEL_1) +#define MX28_PAD_SSP3_SCK__AUART4_TX MXS_IOMUX_PAD_NAKED(2, 24, PAD_MUXSEL_1) +#define MX28_PAD_SSP3_MOSI__AUART4_RX MXS_IOMUX_PAD_NAKED(2, 25, PAD_MUXSEL_1) +#define MX28_PAD_SSP3_MISO__AUART4_RTS MXS_IOMUX_PAD_NAKED(2, 26, PAD_MUXSEL_1) +#define MX28_PAD_SSP3_SS0__AUART4_CTS MXS_IOMUX_PAD_NAKED(2, 27, PAD_MUXSEL_1) + +#define MX28_PAD_AUART0_RX__I2C0_SCL MXS_IOMUX_PAD_NAKED(3, 0, PAD_MUXSEL_1) +#define MX28_PAD_AUART0_TX__I2C0_SDA MXS_IOMUX_PAD_NAKED(3, 1, PAD_MUXSEL_1) +#define MX28_PAD_AUART0_CTS__AUART4_RX MXS_IOMUX_PAD_NAKED(3, 2, PAD_MUXSEL_1) +#define MX28_PAD_AUART0_RTS__AUART4_TX MXS_IOMUX_PAD_NAKED(3, 3, PAD_MUXSEL_1) +#define MX28_PAD_AUART1_RX__SSP2_CARD_DETECT MXS_IOMUX_PAD_NAKED(3, 4, PAD_MUXSEL_1) +#define MX28_PAD_AUART1_TX__SSP3_CARD_DETECT MXS_IOMUX_PAD_NAKED(3, 5, PAD_MUXSEL_1) +#define MX28_PAD_AUART1_CTS__USB0_OVERCURRENT MXS_IOMUX_PAD_NAKED(3, 6, PAD_MUXSEL_1) +#define MX28_PAD_AUART1_RTS__USB0_ID MXS_IOMUX_PAD_NAKED(3, 7, PAD_MUXSEL_1) +#define MX28_PAD_AUART2_RX__SSP3_D1 MXS_IOMUX_PAD_NAKED(3, 8, PAD_MUXSEL_1) +#define MX28_PAD_AUART2_TX__SSP3_D2 MXS_IOMUX_PAD_NAKED(3, 9, PAD_MUXSEL_1) +#define MX28_PAD_AUART2_CTS__I2C1_SCL MXS_IOMUX_PAD_NAKED(3, 10, PAD_MUXSEL_1) +#define MX28_PAD_AUART2_RTS__I2C1_SDA MXS_IOMUX_PAD_NAKED(3, 11, PAD_MUXSEL_1) +#define MX28_PAD_AUART3_RX__CAN0_TX MXS_IOMUX_PAD_NAKED(3, 12, PAD_MUXSEL_1) +#define MX28_PAD_AUART3_TX__CAN0_RX MXS_IOMUX_PAD_NAKED(3, 13, PAD_MUXSEL_1) +#define MX28_PAD_AUART3_CTS__CAN1_TX MXS_IOMUX_PAD_NAKED(3, 14, PAD_MUXSEL_1) +#define MX28_PAD_AUART3_RTS__CAN1_RX MXS_IOMUX_PAD_NAKED(3, 15, PAD_MUXSEL_1) +#define MX28_PAD_PWM0__I2C1_SCL MXS_IOMUX_PAD_NAKED(3, 16, PAD_MUXSEL_1) +#define MX28_PAD_PWM1__I2C1_SDA MXS_IOMUX_PAD_NAKED(3, 17, PAD_MUXSEL_1) +#define MX28_PAD_PWM2__USB0_ID MXS_IOMUX_PAD_NAKED(3, 18, PAD_MUXSEL_1) +#define MX28_PAD_SAIF0_MCLK__PWM_3 MXS_IOMUX_PAD_NAKED(3, 20, PAD_MUXSEL_1) +#define MX28_PAD_SAIF0_LRCLK__PWM_4 MXS_IOMUX_PAD_NAKED(3, 21, PAD_MUXSEL_1) +#define MX28_PAD_SAIF0_BITCLK__PWM_5 MXS_IOMUX_PAD_NAKED(3, 22, PAD_MUXSEL_1) +#define MX28_PAD_SAIF0_SDATA0__PWM_6 MXS_IOMUX_PAD_NAKED(3, 23, PAD_MUXSEL_1) +#define MX28_PAD_I2C0_SCL__TIMROT_ROTARYA MXS_IOMUX_PAD_NAKED(3, 24, PAD_MUXSEL_1) +#define MX28_PAD_I2C0_SDA__TIMROT_ROTARYB MXS_IOMUX_PAD_NAKED(3, 25, PAD_MUXSEL_1) +#define MX28_PAD_SAIF1_SDATA0__PWM_7 MXS_IOMUX_PAD_NAKED(3, 26, PAD_MUXSEL_1) +#define MX28_PAD_LCD_RESET__LCD_VSYNC MXS_IOMUX_PAD_NAKED(3, 30, PAD_MUXSEL_1) + +#define MX28_PAD_ENET0_MDC__GPMI_CE4N MXS_IOMUX_PAD_NAKED(4, 0, PAD_MUXSEL_1) +#define MX28_PAD_ENET0_MDIO__GPMI_CE5N MXS_IOMUX_PAD_NAKED(4, 1, PAD_MUXSEL_1) +#define MX28_PAD_ENET0_RX_EN__GPMI_CE6N MXS_IOMUX_PAD_NAKED(4, 2, PAD_MUXSEL_1) +#define MX28_PAD_ENET0_RXD0__GPMI_CE7N MXS_IOMUX_PAD_NAKED(4, 3, PAD_MUXSEL_1) +#define MX28_PAD_ENET0_RXD1__GPMI_READY4 MXS_IOMUX_PAD_NAKED(4, 4, PAD_MUXSEL_1) +#define MX28_PAD_ENET0_TX_CLK__HSADC_TRIGGER MXS_IOMUX_PAD_NAKED(4, 5, PAD_MUXSEL_1) +#define MX28_PAD_ENET0_TX_EN__GPMI_READY5 MXS_IOMUX_PAD_NAKED(4, 6, PAD_MUXSEL_1) +#define MX28_PAD_ENET0_TXD0__GPMI_READY6 MXS_IOMUX_PAD_NAKED(4, 7, PAD_MUXSEL_1) +#define MX28_PAD_ENET0_TXD1__GPMI_READY7 MXS_IOMUX_PAD_NAKED(4, 8, PAD_MUXSEL_1) +#define MX28_PAD_ENET0_RXD2__ENET1_RXD0 MXS_IOMUX_PAD_NAKED(4, 9, PAD_MUXSEL_1) +#define MX28_PAD_ENET0_RXD3__ENET1_RXD1 MXS_IOMUX_PAD_NAKED(4, 10, PAD_MUXSEL_1) +#define MX28_PAD_ENET0_TXD2__ENET1_TXD0 MXS_IOMUX_PAD_NAKED(4, 11, PAD_MUXSEL_1) +#define MX28_PAD_ENET0_TXD3__ENET1_TXD1 MXS_IOMUX_PAD_NAKED(4, 12, PAD_MUXSEL_1) +#define MX28_PAD_ENET0_RX_CLK__ENET0_RX_ER MXS_IOMUX_PAD_NAKED(4, 13, PAD_MUXSEL_1) +#define MX28_PAD_ENET0_COL__ENET1_TX_EN MXS_IOMUX_PAD_NAKED(4, 14, PAD_MUXSEL_1) +#define MX28_PAD_ENET0_CRS__ENET1_RX_EN MXS_IOMUX_PAD_NAKED(4, 15, PAD_MUXSEL_1) + +/* MUXSEL_2 */ +#define MX28_PAD_GPMI_CE2N__ENET0_RX_ER MXS_IOMUX_PAD_NAKED(0, 18, PAD_MUXSEL_2) +#define MX28_PAD_GPMI_CE3N__SAIF1_MCLK MXS_IOMUX_PAD_NAKED(0, 19, PAD_MUXSEL_2) +#define MX28_PAD_GPMI_RDY0__USB0_ID MXS_IOMUX_PAD_NAKED(0, 20, PAD_MUXSEL_2) +#define MX28_PAD_GPMI_RDY2__ENET0_TX_ER MXS_IOMUX_PAD_NAKED(0, 22, PAD_MUXSEL_2) +#define MX28_PAD_GPMI_RDY3__HSADC_TRIGGER MXS_IOMUX_PAD_NAKED(0, 23, PAD_MUXSEL_2) +#define MX28_PAD_GPMI_ALE__SSP3_D4 MXS_IOMUX_PAD_NAKED(0, 26, PAD_MUXSEL_2) +#define MX28_PAD_GPMI_CLE__SSP3_D5 MXS_IOMUX_PAD_NAKED(0, 27, PAD_MUXSEL_2) + +#define MX28_PAD_LCD_D00__ETM_DA0 MXS_IOMUX_PAD_NAKED(1, 0, PAD_MUXSEL_2) +#define MX28_PAD_LCD_D01__ETM_DA1 MXS_IOMUX_PAD_NAKED(1, 1, PAD_MUXSEL_2) +#define MX28_PAD_LCD_D02__ETM_DA2 MXS_IOMUX_PAD_NAKED(1, 2, PAD_MUXSEL_2) +#define MX28_PAD_LCD_D03__ETM_DA3 MXS_IOMUX_PAD_NAKED(1, 3, PAD_MUXSEL_2) +#define MX28_PAD_LCD_D04__ETM_DA4 MXS_IOMUX_PAD_NAKED(1, 4, PAD_MUXSEL_2) +#define MX28_PAD_LCD_D05__ETM_DA5 MXS_IOMUX_PAD_NAKED(1, 5, PAD_MUXSEL_2) +#define MX28_PAD_LCD_D06__ETM_DA6 MXS_IOMUX_PAD_NAKED(1, 6, PAD_MUXSEL_2) +#define MX28_PAD_LCD_D07__ETM_DA7 MXS_IOMUX_PAD_NAKED(1, 7, PAD_MUXSEL_2) +#define MX28_PAD_LCD_D08__ETM_DA8 MXS_IOMUX_PAD_NAKED(1, 8, PAD_MUXSEL_2) +#define MX28_PAD_LCD_D09__ETM_DA9 MXS_IOMUX_PAD_NAKED(1, 9, PAD_MUXSEL_2) +#define MX28_PAD_LCD_D10__ETM_DA10 MXS_IOMUX_PAD_NAKED(1, 10, PAD_MUXSEL_2) +#define MX28_PAD_LCD_D11__ETM_DA11 MXS_IOMUX_PAD_NAKED(1, 11, PAD_MUXSEL_2) +#define MX28_PAD_LCD_D12__ETM_DA12 MXS_IOMUX_PAD_NAKED(1, 12, PAD_MUXSEL_2) +#define MX28_PAD_LCD_D13__ETM_DA13 MXS_IOMUX_PAD_NAKED(1, 13, PAD_MUXSEL_2) +#define MX28_PAD_LCD_D14__ETM_DA14 MXS_IOMUX_PAD_NAKED(1, 14, PAD_MUXSEL_2) +#define MX28_PAD_LCD_D15__ETM_DA15 MXS_IOMUX_PAD_NAKED(1, 15, PAD_MUXSEL_2) +#define MX28_PAD_LCD_D16__ETM_DA7 MXS_IOMUX_PAD_NAKED(1, 16, PAD_MUXSEL_2) +#define MX28_PAD_LCD_D17__ETM_DA6 MXS_IOMUX_PAD_NAKED(1, 17, PAD_MUXSEL_2) +#define MX28_PAD_LCD_D18__ETM_DA5 MXS_IOMUX_PAD_NAKED(1, 18, PAD_MUXSEL_2) +#define MX28_PAD_LCD_D19__ETM_DA4 MXS_IOMUX_PAD_NAKED(1, 19, PAD_MUXSEL_2) +#define MX28_PAD_LCD_D20__ETM_DA3 MXS_IOMUX_PAD_NAKED(1, 20, PAD_MUXSEL_2) +#define MX28_PAD_LCD_D21__ETM_DA2 MXS_IOMUX_PAD_NAKED(1, 21, PAD_MUXSEL_2) +#define MX28_PAD_LCD_D22__ETM_DA1 MXS_IOMUX_PAD_NAKED(1, 22, PAD_MUXSEL_2) +#define MX28_PAD_LCD_D23__ETM_DA0 MXS_IOMUX_PAD_NAKED(1, 23, PAD_MUXSEL_2) +#define MX28_PAD_LCD_RD_E__ETM_TCTL MXS_IOMUX_PAD_NAKED(1, 24, PAD_MUXSEL_2) +#define MX28_PAD_LCD_WR_RWN__ETM_TCLK MXS_IOMUX_PAD_NAKED(1, 25, PAD_MUXSEL_2) +#define MX28_PAD_LCD_HSYNC__ETM_TCTL MXS_IOMUX_PAD_NAKED(1, 29, PAD_MUXSEL_2) +#define MX28_PAD_LCD_DOTCLK__ETM_TCLK MXS_IOMUX_PAD_NAKED(1, 30, PAD_MUXSEL_2) + +#define MX28_PAD_SSP1_SCK__ENET0_1588_EVENT2_OUT MXS_IOMUX_PAD_NAKED(2, 12, PAD_MUXSEL_2) +#define MX28_PAD_SSP1_CMD__ENET0_1588_EVENT2_IN MXS_IOMUX_PAD_NAKED(2, 13, PAD_MUXSEL_2) +#define MX28_PAD_SSP1_DATA0__ENET0_1588_EVENT3_OUT MXS_IOMUX_PAD_NAKED(2, 14, PAD_MUXSEL_2) +#define MX28_PAD_SSP1_DATA3__ENET0_1588_EVENT3_IN MXS_IOMUX_PAD_NAKED(2, 15, PAD_MUXSEL_2) +#define MX28_PAD_SSP2_SCK__SAIF0_SDATA1 MXS_IOMUX_PAD_NAKED(2, 16, PAD_MUXSEL_2) +#define MX28_PAD_SSP2_MOSI__SAIF0_SDATA2 MXS_IOMUX_PAD_NAKED(2, 17, PAD_MUXSEL_2) +#define MX28_PAD_SSP2_MISO__SAIF1_SDATA1 MXS_IOMUX_PAD_NAKED(2, 18, PAD_MUXSEL_2) +#define MX28_PAD_SSP2_SS0__SAIF1_SDATA2 MXS_IOMUX_PAD_NAKED(2, 19, PAD_MUXSEL_2) +#define MX28_PAD_SSP2_SS1__USB1_OVERCURRENT MXS_IOMUX_PAD_NAKED(2, 20, PAD_MUXSEL_2) +#define MX28_PAD_SSP2_SS2__USB0_OVERCURRENT MXS_IOMUX_PAD_NAKED(2, 21, PAD_MUXSEL_2) +#define MX28_PAD_SSP3_SCK__ENET1_1588_EVENT0_OUT MXS_IOMUX_PAD_NAKED(2, 24, PAD_MUXSEL_2) +#define MX28_PAD_SSP3_MOSI__ENET1_1588_EVENT0_IN MXS_IOMUX_PAD_NAKED(2, 25, PAD_MUXSEL_2) +#define MX28_PAD_SSP3_MISO__ENET1_1588_EVENT1_OUT MXS_IOMUX_PAD_NAKED(2, 26, PAD_MUXSEL_2) +#define MX28_PAD_SSP3_SS0__ENET1_1588_EVENT1_IN MXS_IOMUX_PAD_NAKED(2, 27, PAD_MUXSEL_2) + +#define MX28_PAD_AUART0_RX__DUART_CTS MXS_IOMUX_PAD_NAKED(3, 0, PAD_MUXSEL_2) +#define MX28_PAD_AUART0_TX__DUART_RTS MXS_IOMUX_PAD_NAKED(3, 1, PAD_MUXSEL_2) +#define MX28_PAD_AUART0_CTS__DUART_RX MXS_IOMUX_PAD_NAKED(3, 2, PAD_MUXSEL_2) +#define MX28_PAD_AUART0_RTS__DUART_TX MXS_IOMUX_PAD_NAKED(3, 3, PAD_MUXSEL_2) +#define MX28_PAD_AUART1_RX__PWM_0 MXS_IOMUX_PAD_NAKED(3, 4, PAD_MUXSEL_2) +#define MX28_PAD_AUART1_TX__PWM_1 MXS_IOMUX_PAD_NAKED(3, 5, PAD_MUXSEL_2) +#define MX28_PAD_AUART1_CTS__TIMROT_ROTARYA MXS_IOMUX_PAD_NAKED(3, 6, PAD_MUXSEL_2) +#define MX28_PAD_AUART1_RTS__TIMROT_ROTARYB MXS_IOMUX_PAD_NAKED(3, 7, PAD_MUXSEL_2) +#define MX28_PAD_AUART2_RX__SSP3_D4 MXS_IOMUX_PAD_NAKED(3, 8, PAD_MUXSEL_2) +#define MX28_PAD_AUART2_TX__SSP3_D5 MXS_IOMUX_PAD_NAKED(3, 9, PAD_MUXSEL_2) +#define MX28_PAD_AUART2_CTS__SAIF1_BITCLK MXS_IOMUX_PAD_NAKED(3, 10, PAD_MUXSEL_2) +#define MX28_PAD_AUART2_RTS__SAIF1_LRCLK MXS_IOMUX_PAD_NAKED(3, 11, PAD_MUXSEL_2) +#define MX28_PAD_AUART3_RX__ENET0_1588_EVENT0_OUT MXS_IOMUX_PAD_NAKED(3, 12, PAD_MUXSEL_2) +#define MX28_PAD_AUART3_TX__ENET0_1588_EVENT0_IN MXS_IOMUX_PAD_NAKED(3, 13, PAD_MUXSEL_2) +#define MX28_PAD_AUART3_CTS__ENET0_1588_EVENT1_OUT MXS_IOMUX_PAD_NAKED(3, 14, PAD_MUXSEL_2) +#define MX28_PAD_AUART3_RTS__ENET0_1588_EVENT1_IN MXS_IOMUX_PAD_NAKED(3, 15, PAD_MUXSEL_2) +#define MX28_PAD_PWM0__DUART_RX MXS_IOMUX_PAD_NAKED(3, 16, PAD_MUXSEL_2) +#define MX28_PAD_PWM1__DUART_TX MXS_IOMUX_PAD_NAKED(3, 17, PAD_MUXSEL_2) +#define MX28_PAD_PWM2__USB1_OVERCURRENT MXS_IOMUX_PAD_NAKED(3, 18, PAD_MUXSEL_2) +#define MX28_PAD_SAIF0_MCLK__AUART4_CTS MXS_IOMUX_PAD_NAKED(3, 20, PAD_MUXSEL_2) +#define MX28_PAD_SAIF0_LRCLK__AUART4_RTS MXS_IOMUX_PAD_NAKED(3, 21, PAD_MUXSEL_2) +#define MX28_PAD_SAIF0_BITCLK__AUART4_RX MXS_IOMUX_PAD_NAKED(3, 22, PAD_MUXSEL_2) +#define MX28_PAD_SAIF0_SDATA0__AUART4_TX MXS_IOMUX_PAD_NAKED(3, 23, PAD_MUXSEL_2) +#define MX28_PAD_I2C0_SCL__DUART_RX MXS_IOMUX_PAD_NAKED(3, 24, PAD_MUXSEL_2) +#define MX28_PAD_I2C0_SDA__DUART_TX MXS_IOMUX_PAD_NAKED(3, 25, PAD_MUXSEL_2) +#define MX28_PAD_SAIF1_SDATA0__SAIF0_SDATA1 MXS_IOMUX_PAD_NAKED(3, 26, PAD_MUXSEL_2) +#define MX28_PAD_SPDIF__ENET1_RX_ER MXS_IOMUX_PAD_NAKED(3, 27, PAD_MUXSEL_2) + +#define MX28_PAD_ENET0_MDC__SAIF0_SDATA1 MXS_IOMUX_PAD_NAKED(4, 0, PAD_MUXSEL_2) +#define MX28_PAD_ENET0_MDIO__SAIF0_SDATA2 MXS_IOMUX_PAD_NAKED(4, 1, PAD_MUXSEL_2) +#define MX28_PAD_ENET0_RX_EN__SAIF1_SDATA1 MXS_IOMUX_PAD_NAKED(4, 2, PAD_MUXSEL_2) +#define MX28_PAD_ENET0_RXD0__SAIF1_SDATA2 MXS_IOMUX_PAD_NAKED(4, 3, PAD_MUXSEL_2) +#define MX28_PAD_ENET0_TX_CLK__ENET0_1588_EVENT2_OUT MXS_IOMUX_PAD_NAKED(4, 5, PAD_MUXSEL_2) +#define MX28_PAD_ENET0_RXD2__ENET0_1588_EVENT0_OUT MXS_IOMUX_PAD_NAKED(4, 9, PAD_MUXSEL_2) +#define MX28_PAD_ENET0_RXD3__ENET0_1588_EVENT0_IN MXS_IOMUX_PAD_NAKED(4, 10, PAD_MUXSEL_2) +#define MX28_PAD_ENET0_TXD2__ENET0_1588_EVENT1_OUT MXS_IOMUX_PAD_NAKED(4, 11, PAD_MUXSEL_2) +#define MX28_PAD_ENET0_TXD3__ENET0_1588_EVENT1_IN MXS_IOMUX_PAD_NAKED(4, 12, PAD_MUXSEL_2) +#define MX28_PAD_ENET0_RX_CLK__ENET0_1588_EVENT2_IN MXS_IOMUX_PAD_NAKED(4, 13, PAD_MUXSEL_2) +#define MX28_PAD_ENET0_COL__ENET0_1588_EVENT3_OUT MXS_IOMUX_PAD_NAKED(4, 14, PAD_MUXSEL_2) +#define MX28_PAD_ENET0_CRS__ENET0_1588_EVENT3_IN MXS_IOMUX_PAD_NAKED(4, 15, PAD_MUXSEL_2) + +/* MUXSEL_GPIO */ +#define MX28_PAD_GPMI_D00__GPIO_0_0 MXS_IOMUX_PAD_NAKED(0, 0, PAD_MUXSEL_GPIO) +#define MX28_PAD_GPMI_D01__GPIO_0_1 MXS_IOMUX_PAD_NAKED(0, 1, PAD_MUXSEL_GPIO) +#define MX28_PAD_GPMI_D02__GPIO_0_2 MXS_IOMUX_PAD_NAKED(0, 2, PAD_MUXSEL_GPIO) +#define MX28_PAD_GPMI_D03__GPIO_0_3 MXS_IOMUX_PAD_NAKED(0, 3, PAD_MUXSEL_GPIO) +#define MX28_PAD_GPMI_D04__GPIO_0_4 MXS_IOMUX_PAD_NAKED(0, 4, PAD_MUXSEL_GPIO) +#define MX28_PAD_GPMI_D05__GPIO_0_5 MXS_IOMUX_PAD_NAKED(0, 5, PAD_MUXSEL_GPIO) +#define MX28_PAD_GPMI_D06__GPIO_0_6 MXS_IOMUX_PAD_NAKED(0, 6, PAD_MUXSEL_GPIO) +#define MX28_PAD_GPMI_D07__GPIO_0_7 MXS_IOMUX_PAD_NAKED(0, 7, PAD_MUXSEL_GPIO) +#define MX28_PAD_GPMI_CE0N__GPIO_0_16 MXS_IOMUX_PAD_NAKED(0, 16, PAD_MUXSEL_GPIO) +#define MX28_PAD_GPMI_CE1N__GPIO_0_17 MXS_IOMUX_PAD_NAKED(0, 17, PAD_MUXSEL_GPIO) +#define MX28_PAD_GPMI_CE2N__GPIO_0_18 MXS_IOMUX_PAD_NAKED(0, 18, PAD_MUXSEL_GPIO) +#define MX28_PAD_GPMI_CE3N__GPIO_0_19 MXS_IOMUX_PAD_NAKED(0, 19, PAD_MUXSEL_GPIO) +#define MX28_PAD_GPMI_RDY0__GPIO_0_20 MXS_IOMUX_PAD_NAKED(0, 20, PAD_MUXSEL_GPIO) +#define MX28_PAD_GPMI_RDY1__GPIO_0_21 MXS_IOMUX_PAD_NAKED(0, 21, PAD_MUXSEL_GPIO) +#define MX28_PAD_GPMI_RDY2__GPIO_0_22 MXS_IOMUX_PAD_NAKED(0, 22, PAD_MUXSEL_GPIO) +#define MX28_PAD_GPMI_RDY3__GPIO_0_23 MXS_IOMUX_PAD_NAKED(0, 23, PAD_MUXSEL_GPIO) +#define MX28_PAD_GPMI_RDN__GPIO_0_24 MXS_IOMUX_PAD_NAKED(0, 24, PAD_MUXSEL_GPIO) +#define MX28_PAD_GPMI_WRN__GPIO_0_25 MXS_IOMUX_PAD_NAKED(0, 25, PAD_MUXSEL_GPIO) +#define MX28_PAD_GPMI_ALE__GPIO_0_26 MXS_IOMUX_PAD_NAKED(0, 26, PAD_MUXSEL_GPIO) +#define MX28_PAD_GPMI_CLE__GPIO_0_27 MXS_IOMUX_PAD_NAKED(0, 27, PAD_MUXSEL_GPIO) +#define MX28_PAD_GPMI_RESETN__GPIO_0_28 MXS_IOMUX_PAD_NAKED(0, 28, PAD_MUXSEL_GPIO) + +#define MX28_PAD_LCD_D00__GPIO_1_0 MXS_IOMUX_PAD_NAKED(1, 0, PAD_MUXSEL_GPIO) +#define MX28_PAD_LCD_D01__GPIO_1_1 MXS_IOMUX_PAD_NAKED(1, 1, PAD_MUXSEL_GPIO) +#define MX28_PAD_LCD_D02__GPIO_1_2 MXS_IOMUX_PAD_NAKED(1, 2, PAD_MUXSEL_GPIO) +#define MX28_PAD_LCD_D03__GPIO_1_3 MXS_IOMUX_PAD_NAKED(1, 3, PAD_MUXSEL_GPIO) +#define MX28_PAD_LCD_D04__GPIO_1_4 MXS_IOMUX_PAD_NAKED(1, 4, PAD_MUXSEL_GPIO) +#define MX28_PAD_LCD_D05__GPIO_1_5 MXS_IOMUX_PAD_NAKED(1, 5, PAD_MUXSEL_GPIO) +#define MX28_PAD_LCD_D06__GPIO_1_6 MXS_IOMUX_PAD_NAKED(1, 6, PAD_MUXSEL_GPIO) +#define MX28_PAD_LCD_D07__GPIO_1_7 MXS_IOMUX_PAD_NAKED(1, 7, PAD_MUXSEL_GPIO) +#define MX28_PAD_LCD_D08__GPIO_1_8 MXS_IOMUX_PAD_NAKED(1, 8, PAD_MUXSEL_GPIO) +#define MX28_PAD_LCD_D09__GPIO_1_9 MXS_IOMUX_PAD_NAKED(1, 9, PAD_MUXSEL_GPIO) +#define MX28_PAD_LCD_D10__GPIO_1_10 MXS_IOMUX_PAD_NAKED(1, 10, PAD_MUXSEL_GPIO) +#define MX28_PAD_LCD_D11__GPIO_1_11 MXS_IOMUX_PAD_NAKED(1, 11, PAD_MUXSEL_GPIO) +#define MX28_PAD_LCD_D12__GPIO_1_12 MXS_IOMUX_PAD_NAKED(1, 12, PAD_MUXSEL_GPIO) +#define MX28_PAD_LCD_D13__GPIO_1_13 MXS_IOMUX_PAD_NAKED(1, 13, PAD_MUXSEL_GPIO) +#define MX28_PAD_LCD_D14__GPIO_1_14 MXS_IOMUX_PAD_NAKED(1, 14, PAD_MUXSEL_GPIO) +#define MX28_PAD_LCD_D15__GPIO_1_15 MXS_IOMUX_PAD_NAKED(1, 15, PAD_MUXSEL_GPIO) +#define MX28_PAD_LCD_D16__GPIO_1_16 MXS_IOMUX_PAD_NAKED(1, 16, PAD_MUXSEL_GPIO) +#define MX28_PAD_LCD_D17__GPIO_1_17 MXS_IOMUX_PAD_NAKED(1, 17, PAD_MUXSEL_GPIO) +#define MX28_PAD_LCD_D18__GPIO_1_18 MXS_IOMUX_PAD_NAKED(1, 18, PAD_MUXSEL_GPIO) +#define MX28_PAD_LCD_D19__GPIO_1_19 MXS_IOMUX_PAD_NAKED(1, 19, PAD_MUXSEL_GPIO) +#define MX28_PAD_LCD_D20__GPIO_1_20 MXS_IOMUX_PAD_NAKED(1, 20, PAD_MUXSEL_GPIO) +#define MX28_PAD_LCD_D21__GPIO_1_21 MXS_IOMUX_PAD_NAKED(1, 21, PAD_MUXSEL_GPIO) +#define MX28_PAD_LCD_D22__GPIO_1_22 MXS_IOMUX_PAD_NAKED(1, 22, PAD_MUXSEL_GPIO) +#define MX28_PAD_LCD_D23__GPIO_1_23 MXS_IOMUX_PAD_NAKED(1, 23, PAD_MUXSEL_GPIO) +#define MX28_PAD_LCD_RD_E__GPIO_1_24 MXS_IOMUX_PAD_NAKED(1, 24, PAD_MUXSEL_GPIO) +#define MX28_PAD_LCD_WR_RWN__GPIO_1_25 MXS_IOMUX_PAD_NAKED(1, 25, PAD_MUXSEL_GPIO) +#define MX28_PAD_LCD_RS__GPIO_1_26 MXS_IOMUX_PAD_NAKED(1, 26, PAD_MUXSEL_GPIO) +#define MX28_PAD_LCD_CS__GPIO_1_27 MXS_IOMUX_PAD_NAKED(1, 27, PAD_MUXSEL_GPIO) +#define MX28_PAD_LCD_VSYNC__GPIO_1_28 MXS_IOMUX_PAD_NAKED(1, 28, PAD_MUXSEL_GPIO) +#define MX28_PAD_LCD_HSYNC__GPIO_1_29 MXS_IOMUX_PAD_NAKED(1, 29, PAD_MUXSEL_GPIO) +#define MX28_PAD_LCD_DOTCLK__GPIO_1_30 MXS_IOMUX_PAD_NAKED(1, 30, PAD_MUXSEL_GPIO) +#define MX28_PAD_LCD_ENABLE__GPIO_1_31 MXS_IOMUX_PAD_NAKED(1, 31, PAD_MUXSEL_GPIO) + +#define MX28_PAD_SSP0_DATA0__GPIO_2_0 MXS_IOMUX_PAD_NAKED(2, 0, PAD_MUXSEL_GPIO) +#define MX28_PAD_SSP0_DATA1__GPIO_2_1 MXS_IOMUX_PAD_NAKED(2, 1, PAD_MUXSEL_GPIO) +#define MX28_PAD_SSP0_DATA2__GPIO_2_2 MXS_IOMUX_PAD_NAKED(2, 2, PAD_MUXSEL_GPIO) +#define MX28_PAD_SSP0_DATA3__GPIO_2_3 MXS_IOMUX_PAD_NAKED(2, 3, PAD_MUXSEL_GPIO) +#define MX28_PAD_SSP0_DATA4__GPIO_2_4 MXS_IOMUX_PAD_NAKED(2, 4, PAD_MUXSEL_GPIO) +#define MX28_PAD_SSP0_DATA5__GPIO_2_5 MXS_IOMUX_PAD_NAKED(2, 5, PAD_MUXSEL_GPIO) +#define MX28_PAD_SSP0_DATA6__GPIO_2_6 MXS_IOMUX_PAD_NAKED(2, 6, PAD_MUXSEL_GPIO) +#define MX28_PAD_SSP0_DATA7__GPIO_2_7 MXS_IOMUX_PAD_NAKED(2, 7, PAD_MUXSEL_GPIO) +#define MX28_PAD_SSP0_CMD__GPIO_2_8 MXS_IOMUX_PAD_NAKED(2, 8, PAD_MUXSEL_GPIO) +#define MX28_PAD_SSP0_DETECT__GPIO_2_9 MXS_IOMUX_PAD_NAKED(2, 9, PAD_MUXSEL_GPIO) +#define MX28_PAD_SSP0_SCK__GPIO_2_10 MXS_IOMUX_PAD_NAKED(2, 10, PAD_MUXSEL_GPIO) +#define MX28_PAD_SSP1_SCK__GPIO_2_12 MXS_IOMUX_PAD_NAKED(2, 12, PAD_MUXSEL_GPIO) +#define MX28_PAD_SSP1_CMD__GPIO_2_13 MXS_IOMUX_PAD_NAKED(2, 13, PAD_MUXSEL_GPIO) +#define MX28_PAD_SSP1_DATA0__GPIO_2_14 MXS_IOMUX_PAD_NAKED(2, 14, PAD_MUXSEL_GPIO) +#define MX28_PAD_SSP1_DATA3__GPIO_2_15 MXS_IOMUX_PAD_NAKED(2, 15, PAD_MUXSEL_GPIO) +#define MX28_PAD_SSP2_SCK__GPIO_2_16 MXS_IOMUX_PAD_NAKED(2, 16, PAD_MUXSEL_GPIO) +#define MX28_PAD_SSP2_MOSI__GPIO_2_17 MXS_IOMUX_PAD_NAKED(2, 17, PAD_MUXSEL_GPIO) +#define MX28_PAD_SSP2_MISO__GPIO_2_18 MXS_IOMUX_PAD_NAKED(2, 18, PAD_MUXSEL_GPIO) +#define MX28_PAD_SSP2_SS0__GPIO_2_19 MXS_IOMUX_PAD_NAKED(2, 19, PAD_MUXSEL_GPIO) +#define MX28_PAD_SSP2_SS1__GPIO_2_20 MXS_IOMUX_PAD_NAKED(2, 20, PAD_MUXSEL_GPIO) +#define MX28_PAD_SSP2_SS2__GPIO_2_21 MXS_IOMUX_PAD_NAKED(2, 21, PAD_MUXSEL_GPIO) +#define MX28_PAD_SSP3_SCK__GPIO_2_24 MXS_IOMUX_PAD_NAKED(2, 24, PAD_MUXSEL_GPIO) +#define MX28_PAD_SSP3_MOSI__GPIO_2_25 MXS_IOMUX_PAD_NAKED(2, 25, PAD_MUXSEL_GPIO) +#define MX28_PAD_SSP3_MISO__GPIO_2_26 MXS_IOMUX_PAD_NAKED(2, 26, PAD_MUXSEL_GPIO) +#define MX28_PAD_SSP3_SS0__GPIO_2_27 MXS_IOMUX_PAD_NAKED(2, 27, PAD_MUXSEL_GPIO) + +#define MX28_PAD_AUART0_RX__GPIO_3_0 MXS_IOMUX_PAD_NAKED(3, 0, PAD_MUXSEL_GPIO) +#define MX28_PAD_AUART0_TX__GPIO_3_1 MXS_IOMUX_PAD_NAKED(3, 1, PAD_MUXSEL_GPIO) +#define MX28_PAD_AUART0_CTS__GPIO_3_2 MXS_IOMUX_PAD_NAKED(3, 2, PAD_MUXSEL_GPIO) +#define MX28_PAD_AUART0_RTS__GPIO_3_3 MXS_IOMUX_PAD_NAKED(3, 3, PAD_MUXSEL_GPIO) +#define MX28_PAD_AUART1_RX__GPIO_3_4 MXS_IOMUX_PAD_NAKED(3, 4, PAD_MUXSEL_GPIO) +#define MX28_PAD_AUART1_TX__GPIO_3_5 MXS_IOMUX_PAD_NAKED(3, 5, PAD_MUXSEL_GPIO) +#define MX28_PAD_AUART1_CTS__GPIO_3_6 MXS_IOMUX_PAD_NAKED(3, 6, PAD_MUXSEL_GPIO) +#define MX28_PAD_AUART1_RTS__GPIO_3_7 MXS_IOMUX_PAD_NAKED(3, 7, PAD_MUXSEL_GPIO) +#define MX28_PAD_AUART2_RX__GPIO_3_8 MXS_IOMUX_PAD_NAKED(3, 8, PAD_MUXSEL_GPIO) +#define MX28_PAD_AUART2_TX__GPIO_3_9 MXS_IOMUX_PAD_NAKED(3, 9, PAD_MUXSEL_GPIO) +#define MX28_PAD_AUART2_CTS__GPIO_3_10 MXS_IOMUX_PAD_NAKED(3, 10, PAD_MUXSEL_GPIO) +#define MX28_PAD_AUART2_RTS__GPIO_3_11 MXS_IOMUX_PAD_NAKED(3, 11, PAD_MUXSEL_GPIO) +#define MX28_PAD_AUART3_RX__GPIO_3_12 MXS_IOMUX_PAD_NAKED(3, 12, PAD_MUXSEL_GPIO) +#define MX28_PAD_AUART3_TX__GPIO_3_13 MXS_IOMUX_PAD_NAKED(3, 13, PAD_MUXSEL_GPIO) +#define MX28_PAD_AUART3_CTS__GPIO_3_14 MXS_IOMUX_PAD_NAKED(3, 14, PAD_MUXSEL_GPIO) +#define MX28_PAD_AUART3_RTS__GPIO_3_15 MXS_IOMUX_PAD_NAKED(3, 15, PAD_MUXSEL_GPIO) +#define MX28_PAD_PWM0__GPIO_3_16 MXS_IOMUX_PAD_NAKED(3, 16, PAD_MUXSEL_GPIO) +#define MX28_PAD_PWM1__GPIO_3_17 MXS_IOMUX_PAD_NAKED(3, 17, PAD_MUXSEL_GPIO) +#define MX28_PAD_PWM2__GPIO_3_18 MXS_IOMUX_PAD_NAKED(3, 18, PAD_MUXSEL_GPIO) +#define MX28_PAD_SAIF0_MCLK__GPIO_3_20 MXS_IOMUX_PAD_NAKED(3, 20, PAD_MUXSEL_GPIO) +#define MX28_PAD_SAIF0_LRCLK__GPIO_3_21 MXS_IOMUX_PAD_NAKED(3, 21, PAD_MUXSEL_GPIO) +#define MX28_PAD_SAIF0_BITCLK__GPIO_3_22 MXS_IOMUX_PAD_NAKED(3, 22, PAD_MUXSEL_GPIO) +#define MX28_PAD_SAIF0_SDATA0__GPIO_3_23 MXS_IOMUX_PAD_NAKED(3, 23, PAD_MUXSEL_GPIO) +#define MX28_PAD_I2C0_SCL__GPIO_3_24 MXS_IOMUX_PAD_NAKED(3, 24, PAD_MUXSEL_GPIO) +#define MX28_PAD_I2C0_SDA__GPIO_3_25 MXS_IOMUX_PAD_NAKED(3, 25, PAD_MUXSEL_GPIO) +#define MX28_PAD_SAIF1_SDATA0__GPIO_3_26 MXS_IOMUX_PAD_NAKED(3, 26, PAD_MUXSEL_GPIO) +#define MX28_PAD_SPDIF__GPIO_3_27 MXS_IOMUX_PAD_NAKED(3, 27, PAD_MUXSEL_GPIO) +#define MX28_PAD_PWM3__GPIO_3_28 MXS_IOMUX_PAD_NAKED(3, 28, PAD_MUXSEL_GPIO) +#define MX28_PAD_PWM4__GPIO_3_29 MXS_IOMUX_PAD_NAKED(3, 29, PAD_MUXSEL_GPIO) +#define MX28_PAD_LCD_RESET__GPIO_3_30 MXS_IOMUX_PAD_NAKED(3, 30, PAD_MUXSEL_GPIO) + +#define MX28_PAD_ENET0_MDC__GPIO_4_0 MXS_IOMUX_PAD_NAKED(4, 0, PAD_MUXSEL_GPIO) +#define MX28_PAD_ENET0_MDIO__GPIO_4_1 MXS_IOMUX_PAD_NAKED(4, 1, PAD_MUXSEL_GPIO) +#define MX28_PAD_ENET0_RX_EN__GPIO_4_2 MXS_IOMUX_PAD_NAKED(4, 2, PAD_MUXSEL_GPIO) +#define MX28_PAD_ENET0_RXD0__GPIO_4_3 MXS_IOMUX_PAD_NAKED(4, 3, PAD_MUXSEL_GPIO) +#define MX28_PAD_ENET0_RXD1__GPIO_4_4 MXS_IOMUX_PAD_NAKED(4, 4, PAD_MUXSEL_GPIO) +#define MX28_PAD_ENET0_TX_CLK__GPIO_4_5 MXS_IOMUX_PAD_NAKED(4, 5, PAD_MUXSEL_GPIO) +#define MX28_PAD_ENET0_TX_EN__GPIO_4_6 MXS_IOMUX_PAD_NAKED(4, 6, PAD_MUXSEL_GPIO) +#define MX28_PAD_ENET0_TXD0__GPIO_4_7 MXS_IOMUX_PAD_NAKED(4, 7, PAD_MUXSEL_GPIO) +#define MX28_PAD_ENET0_TXD1__GPIO_4_8 MXS_IOMUX_PAD_NAKED(4, 8, PAD_MUXSEL_GPIO) +#define MX28_PAD_ENET0_RXD2__GPIO_4_9 MXS_IOMUX_PAD_NAKED(4, 9, PAD_MUXSEL_GPIO) +#define MX28_PAD_ENET0_RXD3__GPIO_4_10 MXS_IOMUX_PAD_NAKED(4, 10, PAD_MUXSEL_GPIO) +#define MX28_PAD_ENET0_TXD2__GPIO_4_11 MXS_IOMUX_PAD_NAKED(4, 11, PAD_MUXSEL_GPIO) +#define MX28_PAD_ENET0_TXD3__GPIO_4_12 MXS_IOMUX_PAD_NAKED(4, 12, PAD_MUXSEL_GPIO) +#define MX28_PAD_ENET0_RX_CLK__GPIO_4_13 MXS_IOMUX_PAD_NAKED(4, 13, PAD_MUXSEL_GPIO) +#define MX28_PAD_ENET0_COL__GPIO_4_14 MXS_IOMUX_PAD_NAKED(4, 14, PAD_MUXSEL_GPIO) +#define MX28_PAD_ENET0_CRS__GPIO_4_15 MXS_IOMUX_PAD_NAKED(4, 15, PAD_MUXSEL_GPIO) +#define MX28_PAD_ENET_CLK__GPIO_4_16 MXS_IOMUX_PAD_NAKED(4, 16, PAD_MUXSEL_GPIO) +#define MX28_PAD_JTAG_RTCK__GPIO_4_20 MXS_IOMUX_PAD_NAKED(4, 20, PAD_MUXSEL_GPIO) + +#endif /* __MACH_IOMUX_MX28_H__ */ diff --git a/arch/arm/mach-mxs/include/mach/iomux.h b/arch/arm/mach-mxs/include/mach/iomux.h new file mode 100644 index 00000000000..fe558e3c5a9 --- /dev/null +++ b/arch/arm/mach-mxs/include/mach/iomux.h @@ -0,0 +1,165 @@ +/* + * Copyright (C) 2009 by Jan Weitzel Phytec Messtechnik GmbH, + * <armlinux@phytec.de> + * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ + +#ifndef __MACH_MXS_IOMUX_H__ +#define __MACH_MXS_IOMUX_H__ + +/* + * IOMUX/PAD Bit field definitions + * + * PAD_BANK: 0..2 (3) + * PAD_PIN: 3..7 (5) + * PAD_MUXSEL: 8..9 (2) + * PAD_MA: 10..11 (2) + * PAD_MA_VALID: 12 (1) + * PAD_VOL: 13 (1) + * PAD_VOL_VALID: 14 (1) + * PAD_PULL: 15 (1) + * PAD_PULL_VALID: 16 (1) + * RESERVED: 17..31 (15) + */ +typedef u32 iomux_cfg_t; + +#define MXS_PAD_BANK_SHIFT 0 +#define MXS_PAD_BANK_MASK ((iomux_cfg_t)0x7 << MXS_PAD_BANK_SHIFT) +#define MXS_PAD_PIN_SHIFT 3 +#define MXS_PAD_PIN_MASK ((iomux_cfg_t)0x1f << MXS_PAD_PIN_SHIFT) +#define MXS_PAD_MUXSEL_SHIFT 8 +#define MXS_PAD_MUXSEL_MASK ((iomux_cfg_t)0x3 << MXS_PAD_MUXSEL_SHIFT) +#define MXS_PAD_MA_SHIFT 10 +#define MXS_PAD_MA_MASK ((iomux_cfg_t)0x3 << MXS_PAD_MA_SHIFT) +#define MXS_PAD_MA_VALID_SHIFT 12 +#define MXS_PAD_MA_VALID_MASK ((iomux_cfg_t)0x1 << MXS_PAD_MA_VALID_SHIFT) +#define MXS_PAD_VOL_SHIFT 13 +#define MXS_PAD_VOL_MASK ((iomux_cfg_t)0x1 << MXS_PAD_VOL_SHIFT) +#define MXS_PAD_VOL_VALID_SHIFT 14 +#define MXS_PAD_VOL_VALID_MASK ((iomux_cfg_t)0x1 << MXS_PAD_VOL_VALID_SHIFT) +#define MXS_PAD_PULL_SHIFT 15 +#define MXS_PAD_PULL_MASK ((iomux_cfg_t)0x1 << MXS_PAD_PULL_SHIFT) +#define MXS_PAD_PULL_VALID_SHIFT 16 +#define MXS_PAD_PULL_VALID_MASK ((iomux_cfg_t)0x1 << MXS_PAD_PULL_VALID_SHIFT) + +#define PAD_MUXSEL_0 0 +#define PAD_MUXSEL_1 1 +#define PAD_MUXSEL_2 2 +#define PAD_MUXSEL_GPIO 3 + +#define PAD_4MA 0 +#define PAD_8MA 1 +#define PAD_12MA 2 +#define PAD_16MA 3 + +#define PAD_1V8 0 +#define PAD_3V3 1 + +#define PAD_NOPULL 0 +#define PAD_PULLUP 1 + +#define MXS_PAD_4MA ((PAD_4MA << MXS_PAD_MA_SHIFT) | \ + MXS_PAD_MA_VALID_MASK) +#define MXS_PAD_8MA ((PAD_8MA << MXS_PAD_MA_SHIFT) | \ + MXS_PAD_MA_VALID_MASK) +#define MXS_PAD_12MA ((PAD_12MA << MXS_PAD_MA_SHIFT) | \ + MXS_PAD_MA_VALID_MASK) +#define MXS_PAD_16MA ((PAD_16MA << MXS_PAD_MA_SHIFT) | \ + MXS_PAD_MA_VALID_MASK) + +#define MXS_PAD_1V8 ((PAD_1V8 << MXS_PAD_VOL_SHIFT) | \ + MXS_PAD_VOL_VALID_MASK) +#define MXS_PAD_3V3 ((PAD_3V3 << MXS_PAD_VOL_SHIFT) | \ + MXS_PAD_VOL_VALID_MASK) + +#define MXS_PAD_NOPULL ((PAD_NOPULL << MXS_PAD_PULL_SHIFT) | \ + MXS_PAD_PULL_VALID_MASK) +#define MXS_PAD_PULLUP ((PAD_PULLUP << MXS_PAD_PULL_SHIFT) | \ + MXS_PAD_PULL_VALID_MASK) + +#define MXS_IOMUX_PAD(_bank, _pin, _muxsel, _ma, _vol, _pull) \ + (((iomux_cfg_t)(_bank) << MXS_PAD_BANK_SHIFT) | \ + ((iomux_cfg_t)(_pin) << MXS_PAD_PIN_SHIFT) | \ + ((iomux_cfg_t)(_muxsel) << MXS_PAD_MUXSEL_SHIFT) | \ + ((iomux_cfg_t)(_ma) << MXS_PAD_MA_SHIFT) | \ + ((iomux_cfg_t)(_vol) << MXS_PAD_VOL_SHIFT) | \ + ((iomux_cfg_t)(_pull) << MXS_PAD_PULL_SHIFT)) + +/* + * A pad becomes naked, when none of mA, vol or pull + * validity bits is set. + */ +#define MXS_IOMUX_PAD_NAKED(_bank, _pin, _muxsel) \ + MXS_IOMUX_PAD(_bank, _pin, _muxsel, 0, 0, 0) + +static inline unsigned int PAD_BANK(iomux_cfg_t pad) +{ + return (pad & MXS_PAD_BANK_MASK) >> MXS_PAD_BANK_SHIFT; +} + +static inline unsigned int PAD_PIN(iomux_cfg_t pad) +{ + return (pad & MXS_PAD_PIN_MASK) >> MXS_PAD_PIN_SHIFT; +} + +static inline unsigned int PAD_MUXSEL(iomux_cfg_t pad) +{ + return (pad & MXS_PAD_MUXSEL_MASK) >> MXS_PAD_MUXSEL_SHIFT; +} + +static inline unsigned int PAD_MA(iomux_cfg_t pad) +{ + return (pad & MXS_PAD_MA_MASK) >> MXS_PAD_MA_SHIFT; +} + +static inline unsigned int PAD_MA_VALID(iomux_cfg_t pad) +{ + return (pad & MXS_PAD_MA_VALID_MASK) >> MXS_PAD_MA_VALID_SHIFT; +} + +static inline unsigned int PAD_VOL(iomux_cfg_t pad) +{ + return (pad & MXS_PAD_VOL_MASK) >> MXS_PAD_VOL_SHIFT; +} + +static inline unsigned int PAD_VOL_VALID(iomux_cfg_t pad) +{ + return (pad & MXS_PAD_VOL_VALID_MASK) >> MXS_PAD_VOL_VALID_SHIFT; +} + +static inline unsigned int PAD_PULL(iomux_cfg_t pad) +{ + return (pad & MXS_PAD_PULL_MASK) >> MXS_PAD_PULL_SHIFT; +} + +static inline unsigned int PAD_PULL_VALID(iomux_cfg_t pad) +{ + return (pad & MXS_PAD_PULL_VALID_MASK) >> MXS_PAD_PULL_VALID_SHIFT; +} + +/* + * configures a single pad in the iomuxer + */ +int mxs_iomux_setup_pad(iomux_cfg_t pad); + +/* + * configures multiple pads + * convenient way to call the above function with tables + */ +int mxs_iomux_setup_multiple_pads(const iomux_cfg_t *pad_list, unsigned count); + +#endif /* __MACH_MXS_IOMUX_H__*/ diff --git a/arch/arm/mach-mxs/include/mach/irqs.h b/arch/arm/mach-mxs/include/mach/irqs.h new file mode 100644 index 00000000000..f771039b814 --- /dev/null +++ b/arch/arm/mach-mxs/include/mach/irqs.h @@ -0,0 +1,32 @@ +/* + * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. + */ + +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __MACH_MXS_IRQS_H__ +#define __MACH_MXS_IRQS_H__ + +#define MXS_INTERNAL_IRQS 128 + +#define MXS_GPIO_IRQ_START MXS_INTERNAL_IRQS + +/* the maximum for MXS-based */ +#define MXS_GPIO_IRQS (32 * 5) + +/* + * The next 16 interrupts are for board specific purposes. Since + * the kernel can only run on one machine at a time, we can re-use + * these. If you need more, increase MXS_BOARD_IRQS, but keep it + * within sensible limits. + */ +#define MXS_BOARD_IRQ_START (MXS_GPIO_IRQ_START + MXS_GPIO_IRQS) +#define MXS_BOARD_IRQS 16 + +#define NR_IRQS (MXS_BOARD_IRQ_START + MXS_BOARD_IRQS) + +#endif /* __MACH_MXS_IRQS_H__ */ diff --git a/arch/arm/mach-mxs/include/mach/memory.h b/arch/arm/mach-mxs/include/mach/memory.h new file mode 100644 index 00000000000..b5420a5c2d4 --- /dev/null +++ b/arch/arm/mach-mxs/include/mach/memory.h @@ -0,0 +1,24 @@ +/* + * Copyright (C) 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + */ + +#ifndef __MACH_MXS_MEMORY_H__ +#define __MACH_MXS_MEMORY_H__ + +#define PHYS_OFFSET UL(0x40000000) + +#endif /* __MACH_MXS_MEMORY_H__ */ diff --git a/arch/arm/mach-mxs/include/mach/mx23.h b/arch/arm/mach-mxs/include/mach/mx23.h new file mode 100644 index 00000000000..9edd02ec8e3 --- /dev/null +++ b/arch/arm/mach-mxs/include/mach/mx23.h @@ -0,0 +1,145 @@ +/* + * Copyright (C) 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + */ + +#ifndef __MACH_MX23_H__ +#define __MACH_MX23_H__ + +#include <mach/mxs.h> + +/* + * OCRAM + */ +#define MX23_OCRAM_BASE_ADDR 0x00000000 +#define MX23_OCRAM_SIZE SZ_32K + +/* + * IO + */ +#define MX23_IO_BASE_ADDR 0x80000000 +#define MX23_IO_SIZE SZ_1M + +#define MX23_ICOLL_BASE_ADDR (MX23_IO_BASE_ADDR + 0x000000) +#define MX23_APBH_DMA_BASE_ADDR (MX23_IO_BASE_ADDR + 0x004000) +#define MX23_BCH_BASE_ADDR (MX23_IO_BASE_ADDR + 0x00a000) +#define MX23_GPMI_BASE_ADDR (MX23_IO_BASE_ADDR + 0x00c000) +#define MX23_SSP1_BASE_ADDR (MX23_IO_BASE_ADDR + 0x010000) +#define MX23_PINCTRL_BASE_ADDR (MX23_IO_BASE_ADDR + 0x018000) +#define MX23_DIGCTL_BASE_ADDR (MX23_IO_BASE_ADDR + 0x01c000) +#define MX23_ETM_BASE_ADDR (MX23_IO_BASE_ADDR + 0x020000) +#define MX23_APBX_DMA_BASE_ADDR (MX23_IO_BASE_ADDR + 0x024000) +#define MX23_DCP_BASE_ADDR (MX23_IO_BASE_ADDR + 0x028000) +#define MX23_PXP_BASE_ADDR (MX23_IO_BASE_ADDR + 0x02a000) +#define MX23_OCOTP_BASE_ADDR (MX23_IO_BASE_ADDR + 0x02c000) +#define MX23_AXI_AHB0_BASE_ADDR (MX23_IO_BASE_ADDR + 0x02e000) +#define MX23_LCDIF_BASE_ADDR (MX23_IO_BASE_ADDR + 0x030000) +#define MX23_SSP2_BASE_ADDR (MX23_IO_BASE_ADDR + 0x034000) +#define MX23_TVENC_BASE_ADDR (MX23_IO_BASE_ADDR + 0x038000) +#define MX23_CLKCTRL_BASE_ADDR (MX23_IO_BASE_ADDR + 0x040000) +#define MX23_SAIF0_BASE_ADDR (MX23_IO_BASE_ADDR + 0x042000) +#define MX23_POWER_BASE_ADDR (MX23_IO_BASE_ADDR + 0x044000) +#define MX23_SAIF1_BASE_ADDR (MX23_IO_BASE_ADDR + 0x046000) +#define MX23_AUDIOOUT_BASE_ADDR (MX23_IO_BASE_ADDR + 0x048000) +#define MX23_AUDIOIN_BASE_ADDR (MX23_IO_BASE_ADDR + 0x04c000) +#define MX23_LRADC_BASE_ADDR (MX23_IO_BASE_ADDR + 0x050000) +#define MX23_SPDIF_BASE_ADDR (MX23_IO_BASE_ADDR + 0x054000) +#define MX23_I2C0_BASE_ADDR (MX23_IO_BASE_ADDR + 0x058000) +#define MX23_RTC_BASE_ADDR (MX23_IO_BASE_ADDR + 0x05c000) +#define MX23_PWM_BASE_ADDR (MX23_IO_BASE_ADDR + 0x064000) +#define MX23_TIMROT_BASE_ADDR (MX23_IO_BASE_ADDR + 0x068000) +#define MX23_AUART1_BASE_ADDR (MX23_IO_BASE_ADDR + 0x06c000) +#define MX23_AUART2_BASE_ADDR (MX23_IO_BASE_ADDR + 0x06e000) +#define MX23_DUART_BASE_ADDR (MX23_IO_BASE_ADDR + 0x070000) +#define MX23_USBPHY_BASE_ADDR (MX23_IO_BASE_ADDR + 0x07c000) +#define MX23_USBCTRL_BASE_ADDR (MX23_IO_BASE_ADDR + 0x080000) +#define MX23_DRAM_BASE_ADDR (MX23_IO_BASE_ADDR + 0x0e0000) + +#define MX23_IO_P2V(x) MXS_IO_P2V(x) +#define MX23_IO_ADDRESS(x) IOMEM(MX23_IO_P2V(x)) + +/* + * IRQ + */ +#define MX23_INT_DUART 0 +#define MX23_INT_COMMS_RX 1 +#define MX23_INT_COMMS_TX 1 +#define MX23_INT_SSP2_ERROR 2 +#define MX23_INT_VDD5V 3 +#define MX23_INT_HEADPHONE_SHORT 4 +#define MX23_INT_DAC_DMA 5 +#define MX23_INT_DAC_ERROR 6 +#define MX23_INT_ADC_DMA 7 +#define MX23_INT_ADC_ERROR 8 +#define MX23_INT_SPDIF_DMA 9 +#define MX23_INT_SAIF2_DMA 9 +#define MX23_INT_SPDIF_ERROR 10 +#define MX23_INT_SAIF1_IRQ 10 +#define MX23_INT_SAIF2_IRQ 10 +#define MX23_INT_USB_CTRL 11 +#define MX23_INT_USB_WAKEUP 12 +#define MX23_INT_GPMI_DMA 13 +#define MX23_INT_SSP1_DMA 14 +#define MX23_INT_SSP_ERROR 15 +#define MX23_INT_GPIO0 16 +#define MX23_INT_GPIO1 17 +#define MX23_INT_GPIO2 18 +#define MX23_INT_SAIF1_DMA 19 +#define MX23_INT_SSP2_DMA 20 +#define MX23_INT_ECC8_IRQ 21 +#define MX23_INT_RTC_ALARM 22 +#define MX23_INT_UARTAPP_TX_DMA 23 +#define MX23_INT_UARTAPP_INTERNAL 24 +#define MX23_INT_UARTAPP_RX_DMA 25 +#define MX23_INT_I2C_DMA 26 +#define MX23_INT_I2C_ERROR 27 +#define MX23_INT_TIMER0 28 +#define MX23_INT_TIMER1 29 +#define MX23_INT_TIMER2 30 +#define MX23_INT_TIMER3 31 +#define MX23_INT_BATT_BRNOUT 32 +#define MX23_INT_VDDD_BRNOUT 33 +#define MX23_INT_VDDIO_BRNOUT 34 +#define MX23_INT_VDD18_BRNOUT 35 +#define MX23_INT_TOUCH_DETECT 36 +#define MX23_INT_LRADC_CH0 37 +#define MX23_INT_LRADC_CH1 38 +#define MX23_INT_LRADC_CH2 39 +#define MX23_INT_LRADC_CH3 40 +#define MX23_INT_LRADC_CH4 41 +#define MX23_INT_LRADC_CH5 42 +#define MX23_INT_LRADC_CH6 43 +#define MX23_INT_LRADC_CH7 44 +#define MX23_INT_LCDIF_DMA 45 +#define MX23_INT_LCDIF_ERROR 46 +#define MX23_INT_DIGCTL_DEBUG_TRAP 47 +#define MX23_INT_RTC_1MSEC 48 +#define MX23_INT_DRI_DMA 49 +#define MX23_INT_DRI_ATTENTION 50 +#define MX23_INT_GPMI_ATTENTION 51 +#define MX23_INT_IR 52 +#define MX23_INT_DCP_VMI 53 +#define MX23_INT_DCP 54 +#define MX23_INT_BCH 56 +#define MX23_INT_PXP 57 +#define MX23_INT_UARTAPP2_TX_DMA 58 +#define MX23_INT_UARTAPP2_INTERNAL 59 +#define MX23_INT_UARTAPP2_RX_DMA 60 +#define MX23_INT_VDAC_DETECT 61 +#define MX23_INT_VDD5V_DROOP 64 +#define MX23_INT_DCDC4P2_BO 65 + +#endif /* __MACH_MX23_H__ */ diff --git a/arch/arm/mach-mxs/include/mach/mx28.h b/arch/arm/mach-mxs/include/mach/mx28.h new file mode 100644 index 00000000000..0716745267a --- /dev/null +++ b/arch/arm/mach-mxs/include/mach/mx28.h @@ -0,0 +1,188 @@ +/* + * Copyright (C) 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + */ + +#ifndef __MACH_MX28_H__ +#define __MACH_MX28_H__ + +#include <mach/mxs.h> + +/* + * OCRAM + */ +#define MX28_OCRAM_BASE_ADDR 0x00000000 +#define MX28_OCRAM_SIZE SZ_128K + +/* + * IO + */ +#define MX28_IO_BASE_ADDR 0x80000000 +#define MX28_IO_SIZE SZ_1M + +#define MX28_ICOLL_BASE_ADDR (MX28_IO_BASE_ADDR + 0x000000) +#define MX28_HSADC_BASE_ADDR (MX28_IO_BASE_ADDR + 0x002000) +#define MX28_APBH_DMA_BASE_ADDR (MX28_IO_BASE_ADDR + 0x004000) +#define MX28_PERFMON_BASE_ADDR (MX28_IO_BASE_ADDR + 0x006000) +#define MX28_BCH_BASE_ADDR (MX28_IO_BASE_ADDR + 0x00a000) +#define MX28_GPMI_BASE_ADDR (MX28_IO_BASE_ADDR + 0x00c000) +#define MX28_SSP0_BASE_ADDR (MX28_IO_BASE_ADDR + 0x010000) +#define MX28_SSP1_BASE_ADDR (MX28_IO_BASE_ADDR + 0x012000) +#define MX28_SSP2_BASE_ADDR (MX28_IO_BASE_ADDR + 0x014000) +#define MX28_SSP3_BASE_ADDR (MX28_IO_BASE_ADDR + 0x016000) +#define MX28_PINCTRL_BASE_ADDR (MX28_IO_BASE_ADDR + 0x018000) +#define MX28_DIGCTL_BASE_ADDR (MX28_IO_BASE_ADDR + 0x01c000) +#define MX28_ETM_BASE_ADDR (MX28_IO_BASE_ADDR + 0x022000) +#define MX28_APBX_DMA_BASE_ADDR (MX28_IO_BASE_ADDR + 0x024000) +#define MX28_DCP_BASE_ADDR (MX28_IO_BASE_ADDR + 0x028000) +#define MX28_PXP_BASE_ADDR (MX28_IO_BASE_ADDR + 0x02a000) +#define MX28_OCOTP_BASE_ADDR (MX28_IO_BASE_ADDR + 0x02c000) +#define MX28_AXI_AHB0_BASE_ADDR (MX28_IO_BASE_ADDR + 0x02e000) +#define MX28_LCDIF_BASE_ADDR (MX28_IO_BASE_ADDR + 0x030000) +#define MX28_CAN0_BASE_ADDR (MX28_IO_BASE_ADDR + 0x032000) +#define MX28_CAN1_BASE_ADDR (MX28_IO_BASE_ADDR + 0x034000) +#define MX28_SIMDBG_BASE_ADDR (MX28_IO_BASE_ADDR + 0x03c000) +#define MX28_SIMGPMISEL_BASE_ADDR (MX28_IO_BASE_ADDR + 0x03c200) +#define MX28_SIMSSPSEL_BASE_ADDR (MX28_IO_BASE_ADDR + 0x03c300) +#define MX28_SIMMEMSEL_BASE_ADDR (MX28_IO_BASE_ADDR + 0x03c400) +#define MX28_GPIOMON_BASE_ADDR (MX28_IO_BASE_ADDR + 0x03c500) +#define MX28_SIMENET_BASE_ADDR (MX28_IO_BASE_ADDR + 0x03c700) +#define MX28_ARMJTAG_BASE_ADDR (MX28_IO_BASE_ADDR + 0x03c800) +#define MX28_CLKCTRL_BASE_ADDR (MX28_IO_BASE_ADDR + 0x040000) +#define MX28_SAIF0_BASE_ADDR (MX28_IO_BASE_ADDR + 0x042000) +#define MX28_POWER_BASE_ADDR (MX28_IO_BASE_ADDR + 0x044000) +#define MX28_SAIF1_BASE_ADDR (MX28_IO_BASE_ADDR + 0x046000) +#define MX28_LRADC_BASE_ADDR (MX28_IO_BASE_ADDR + 0x050000) +#define MX28_SPDIF_BASE_ADDR (MX28_IO_BASE_ADDR + 0x054000) +#define MX28_RTC_BASE_ADDR (MX28_IO_BASE_ADDR + 0x056000) +#define MX28_I2C0_BASE_ADDR (MX28_IO_BASE_ADDR + 0x058000) +#define MX28_I2C1_BASE_ADDR (MX28_IO_BASE_ADDR + 0x05a000) +#define MX28_PWM_BASE_ADDR (MX28_IO_BASE_ADDR + 0x064000) +#define MX28_TIMROT_BASE_ADDR (MX28_IO_BASE_ADDR + 0x068000) +#define MX28_AUART0_BASE_ADDR (MX28_IO_BASE_ADDR + 0x06a000) +#define MX28_AUART1_BASE_ADDR (MX28_IO_BASE_ADDR + 0x06c000) +#define MX28_AUART2_BASE_ADDR (MX28_IO_BASE_ADDR + 0x06e000) +#define MX28_AUART3_BASE_ADDR (MX28_IO_BASE_ADDR + 0x070000) +#define MX28_AUART4_BASE_ADDR (MX28_IO_BASE_ADDR + 0x072000) +#define MX28_DUART_BASE_ADDR (MX28_IO_BASE_ADDR + 0x074000) +#define MX28_USBPHY0_BASE_ADDR (MX28_IO_BASE_ADDR + 0x07C000) +#define MX28_USBPHY1_BASE_ADDR (MX28_IO_BASE_ADDR + 0x07e000) +#define MX28_USBCTRL0_BASE_ADDR (MX28_IO_BASE_ADDR + 0x080000) +#define MX28_USBCTRL1_BASE_ADDR (MX28_IO_BASE_ADDR + 0x090000) +#define MX28_DFLPT_BASE_ADDR (MX28_IO_BASE_ADDR + 0x0c0000) +#define MX28_DRAM_BASE_ADDR (MX28_IO_BASE_ADDR + 0x0e0000) +#define MX28_ENET_MAC0_BASE_ADDR (MX28_IO_BASE_ADDR + 0x0f0000) +#define MX28_ENET_MAC1_BASE_ADDR (MX28_IO_BASE_ADDR + 0x0f4000) + +#define MX28_IO_P2V(x) MXS_IO_P2V(x) +#define MX28_IO_ADDRESS(x) IOMEM(MX28_IO_P2V(x)) + +/* + * IRQ + */ +#define MX28_INT_BATT_BRNOUT 0 +#define MX28_INT_VDDD_BRNOUT 1 +#define MX28_INT_VDDIO_BRNOUT 2 +#define MX28_INT_VDDA_BRNOUT 3 +#define MX28_INT_VDD5V_DROOP 4 +#define MX28_INT_DCDC4P2_BRNOUT 5 +#define MX28_INT_VDD5V 6 +#define MX28_INT_CAN0 8 +#define MX28_INT_CAN1 9 +#define MX28_INT_LRADC_TOUCH 10 +#define MX28_INT_HSADC 13 +#define MX28_INT_IRADC_THRESH0 14 +#define MX28_INT_IRADC_THRESH1 15 +#define MX28_INT_LRADC_CH0 16 +#define MX28_INT_LRADC_CH1 17 +#define MX28_INT_LRADC_CH2 18 +#define MX28_INT_LRADC_CH3 19 +#define MX28_INT_LRADC_CH4 20 +#define MX28_INT_LRADC_CH5 21 +#define MX28_INT_LRADC_CH6 22 +#define MX28_INT_LRADC_CH7 23 +#define MX28_INT_LRADC_BUTTON0 24 +#define MX28_INT_LRADC_BUTTON1 25 +#define MX28_INT_PERFMON 27 +#define MX28_INT_RTC_1MSEC 28 +#define MX28_INT_RTC_ALARM 29 +#define MX28_INT_COMMS 31 +#define MX28_INT_EMI_ERR 32 +#define MX28_INT_LCDIF 38 +#define MX28_INT_PXP 39 +#define MX28_INT_BCH 41 +#define MX28_INT_GPMI 42 +#define MX28_INT_SPDIF_ERROR 45 +#define MX28_INT_DUART 47 +#define MX28_INT_TIMER0 48 +#define MX28_INT_TIMER1 49 +#define MX28_INT_TIMER2 50 +#define MX28_INT_TIMER3 51 +#define MX28_INT_DCP_VMI 52 +#define MX28_INT_DCP 53 +#define MX28_INT_DCP_SECURE 54 +#define MX28_INT_SAIF1 58 +#define MX28_INT_SAIF0 59 +#define MX28_INT_SPDIF_DMA 66 +#define MX28_INT_I2C0_DMA 68 +#define MX28_INT_I2C1_DMA 69 +#define MX28_INT_AUART0_RX_DMA 70 +#define MX28_INT_AUART0_TX_DMA 71 +#define MX28_INT_AUART1_RX_DMA 72 +#define MX28_INT_AUART1_TX_DMA 73 +#define MX28_INT_AUART2_RX_DMA 74 +#define MX28_INT_AUART2_TX_DMA 75 +#define MX28_INT_AUART3_RX_DMA 76 +#define MX28_INT_AUART3_TX_DMA 77 +#define MX28_INT_AUART4_RX_DMA 78 +#define MX28_INT_AUART4_TX_DMA 79 +#define MX28_INT_SAIF0_DMA 80 +#define MX28_INT_SAIF1_DMA 81 +#define MX28_INT_SSP0_DMA 82 +#define MX28_INT_SSP1_DMA 83 +#define MX28_INT_SSP2_DMA 84 +#define MX28_INT_SSP3_DMA 85 +#define MX28_INT_LCDIF_DMA 86 +#define MX28_INT_HSADC_DMA 87 +#define MX28_INT_GPMI_DMA 88 +#define MX28_INT_DIGCTL_DEBUG_TRAP 89 +#define MX28_INT_USB1 92 +#define MX28_INT_USB0 93 +#define MX28_INT_USB1_WAKEUP 94 +#define MX28_INT_USB0_WAKEUP 95 +#define MX28_INT_SSP0 96 +#define MX28_INT_SSP1 97 +#define MX28_INT_SSP2 98 +#define MX28_INT_SSP3 99 +#define MX28_INT_ENET_SWI 100 +#define MX28_INT_ENET_MAC0 101 +#define MX28_INT_ENET_MAC1 102 +#define MX28_INT_ENET_MAC0_1588 103 +#define MX28_INT_ENET_MAC1_1588 104 +#define MX28_INT_I2C1_ERROR 110 +#define MX28_INT_I2C0_ERROR 111 +#define MX28_INT_AUART0 112 +#define MX28_INT_AUART1 113 +#define MX28_INT_AUART2 114 +#define MX28_INT_AUART3 115 +#define MX28_INT_AUART4 116 +#define MX28_INT_GPIO4 123 +#define MX28_INT_GPIO3 124 +#define MX28_INT_GPIO2 125 +#define MX28_INT_GPIO1 126 +#define MX28_INT_GPIO0 127 + +#endif /* __MACH_MX28_H__ */ diff --git a/arch/arm/mach-mxs/include/mach/mxs.h b/arch/arm/mach-mxs/include/mach/mxs.h new file mode 100644 index 00000000000..f186c08c291 --- /dev/null +++ b/arch/arm/mach-mxs/include/mach/mxs.h @@ -0,0 +1,105 @@ +/* + * Copyright (C) 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + */ + +#ifndef __MACH_MXS_H__ +#define __MACH_MXS_H__ + +#ifndef __ASSEMBLER__ +#include <linux/io.h> +#endif +#include <asm/mach-types.h> +#include <mach/hardware.h> + +/* + * MXS CPU types + */ +#define cpu_is_mx23() (machine_is_mx23evk()) +#define cpu_is_mx28() (machine_is_mx28evk()) + +/* + * IO addresses common to MXS-based + */ +#define MXS_IO_BASE_ADDR 0x80000000 +#define MXS_IO_SIZE SZ_1M + +#define MXS_ICOLL_BASE_ADDR (MXS_IO_BASE_ADDR + 0x000000) +#define MXS_APBH_DMA_BASE_ADDR (MXS_IO_BASE_ADDR + 0x004000) +#define MXS_BCH_BASE_ADDR (MXS_IO_BASE_ADDR + 0x00a000) +#define MXS_GPMI_BASE_ADDR (MXS_IO_BASE_ADDR + 0x00c000) +#define MXS_PINCTRL_BASE_ADDR (MXS_IO_BASE_ADDR + 0x018000) +#define MXS_DIGCTL_BASE_ADDR (MXS_IO_BASE_ADDR + 0x01c000) +#define MXS_APBX_DMA_BASE_ADDR (MXS_IO_BASE_ADDR + 0x024000) +#define MXS_DCP_BASE_ADDR (MXS_IO_BASE_ADDR + 0x028000) +#define MXS_PXP_BASE_ADDR (MXS_IO_BASE_ADDR + 0x02a000) +#define MXS_OCOTP_BASE_ADDR (MXS_IO_BASE_ADDR + 0x02c000) +#define MXS_AXI_AHB0_BASE_ADDR (MXS_IO_BASE_ADDR + 0x02e000) +#define MXS_LCDIF_BASE_ADDR (MXS_IO_BASE_ADDR + 0x030000) +#define MXS_CLKCTRL_BASE_ADDR (MXS_IO_BASE_ADDR + 0x040000) +#define MXS_SAIF0_BASE_ADDR (MXS_IO_BASE_ADDR + 0x042000) +#define MXS_POWER_BASE_ADDR (MXS_IO_BASE_ADDR + 0x044000) +#define MXS_SAIF1_BASE_ADDR (MXS_IO_BASE_ADDR + 0x046000) +#define MXS_LRADC_BASE_ADDR (MXS_IO_BASE_ADDR + 0x050000) +#define MXS_SPDIF_BASE_ADDR (MXS_IO_BASE_ADDR + 0x054000) +#define MXS_I2C0_BASE_ADDR (MXS_IO_BASE_ADDR + 0x058000) +#define MXS_PWM_BASE_ADDR (MXS_IO_BASE_ADDR + 0x064000) +#define MXS_TIMROT_BASE_ADDR (MXS_IO_BASE_ADDR + 0x068000) +#define MXS_AUART1_BASE_ADDR (MXS_IO_BASE_ADDR + 0x06c000) +#define MXS_AUART2_BASE_ADDR (MXS_IO_BASE_ADDR + 0x06e000) +#define MXS_DRAM_BASE_ADDR (MXS_IO_BASE_ADDR + 0x0e0000) + +/* + * It maps the whole address space to [0xf4000000, 0xf50fffff]. + * + * OCRAM 0x00000000+0x020000 -> 0xf4000000+0x020000 + * IO 0x80000000+0x100000 -> 0xf5000000+0x100000 + */ +#define MXS_IO_P2V(x) (0xf4000000 + \ + (((x) & 0x80000000) >> 7) + \ + (((x) & 0x000fffff))) + +#define MXS_IO_ADDRESS(x) IOMEM(MXS_IO_P2V(x)) + +#define mxs_map_entry(soc, name, _type) { \ + .virtual = soc ## _IO_P2V(soc ## _ ## name ## _BASE_ADDR), \ + .pfn = __phys_to_pfn(soc ## _ ## name ## _BASE_ADDR), \ + .length = soc ## _ ## name ## _SIZE, \ + .type = _type, \ +} + +#define MXS_SET_ADDR 0x4 +#define MXS_CLR_ADDR 0x8 +#define MXS_TOG_ADDR 0xc + +#ifndef __ASSEMBLER__ +static inline void __mxs_setl(u32 mask, void __iomem *reg) +{ + __raw_writel(mask, reg + MXS_SET_ADDR); +} + +static inline void __mxs_clrl(u32 mask, void __iomem *reg) +{ + __raw_writel(mask, reg + MXS_CLR_ADDR); +} + +static inline void __mxs_togl(u32 mask, void __iomem *reg) +{ + __raw_writel(mask, reg + MXS_TOG_ADDR); +} +#endif + +#endif /* __MACH_MXS_H__ */ diff --git a/arch/arm/mach-mxs/include/mach/system.h b/arch/arm/mach-mxs/include/mach/system.h new file mode 100644 index 00000000000..0e428239b43 --- /dev/null +++ b/arch/arm/mach-mxs/include/mach/system.h @@ -0,0 +1,27 @@ +/* + * Copyright (C) 1999 ARM Limited + * Copyright (C) 2000 Deep Blue Solutions Ltd + * Copyright 2004-2008 Freescale Semiconductor, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __MACH_MXS_SYSTEM_H__ +#define __MACH_MXS_SYSTEM_H__ + +static inline void arch_idle(void) +{ + cpu_do_idle(); +} + +void arch_reset(char mode, const char *cmd); + +#endif /* __MACH_MXS_SYSTEM_H__ */ diff --git a/arch/arm/mach-mxs/include/mach/timex.h b/arch/arm/mach-mxs/include/mach/timex.h new file mode 100644 index 00000000000..734ce8984a6 --- /dev/null +++ b/arch/arm/mach-mxs/include/mach/timex.h @@ -0,0 +1,21 @@ +/* + * Copyright (C) 1999 ARM Limited + * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __MACH_MXS_TIMEX_H__ +#define __MACH_MXS_TIMEX_H__ + +#define CLOCK_TICK_RATE 32000 /* 32K */ + +#endif /* __MACH_MXS_TIMEX_H__ */ diff --git a/arch/arm/mach-mxs/include/mach/uncompress.h b/arch/arm/mach-mxs/include/mach/uncompress.h new file mode 100644 index 00000000000..a005e76f34f --- /dev/null +++ b/arch/arm/mach-mxs/include/mach/uncompress.h @@ -0,0 +1,76 @@ +/* + * arch/arm/mach-mxs/include/mach/uncompress.h + * + * Copyright (C) 1999 ARM Limited + * Copyright (C) Shane Nay (shane@minirl.com) + * Copyright 2010 Freescale Semiconductor, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ +#ifndef __MACH_MXS_UNCOMPRESS_H__ +#define __MACH_MXS_UNCOMPRESS_H__ + +#include <asm/mach-types.h> + +static unsigned long mxs_duart_base; + +#define MXS_DUART(x) (*(volatile unsigned long *)(mxs_duart_base + (x))) + +#define MXS_DUART_DR 0x00 +#define MXS_DUART_FR 0x18 +#define MXS_DUART_FR_TXFE (1 << 7) +#define MXS_DUART_CR 0x30 +#define MXS_DUART_CR_UARTEN (1 << 0) + +/* + * The following code assumes the serial port has already been + * initialized by the bootloader. If it's not, the output is + * simply discarded. + */ + +static void putc(int ch) +{ + if (!mxs_duart_base) + return; + if (!(MXS_DUART(MXS_DUART_CR) & MXS_DUART_CR_UARTEN)) + return; + + while (!(MXS_DUART(MXS_DUART_FR) & MXS_DUART_FR_TXFE)) + barrier(); + + MXS_DUART(MXS_DUART_DR) = ch; +} + +static inline void flush(void) +{ +} + +#define MX23_DUART_BASE_ADDR 0x80070000 +#define MX28_DUART_BASE_ADDR 0x80074000 + +static inline void __arch_decomp_setup(unsigned long arch_id) +{ + switch (arch_id) { + case MACH_TYPE_MX23EVK: + mxs_duart_base = MX23_DUART_BASE_ADDR; + break; + case MACH_TYPE_MX28EVK: + mxs_duart_base = MX28_DUART_BASE_ADDR; + break; + default: + break; + } +} + +#define arch_decomp_setup() __arch_decomp_setup(arch_id) +#define arch_decomp_wdog() + +#endif /* __MACH_MXS_UNCOMPRESS_H__ */ diff --git a/arch/arm/mach-mxs/include/mach/vmalloc.h b/arch/arm/mach-mxs/include/mach/vmalloc.h new file mode 100644 index 00000000000..103b0165ed0 --- /dev/null +++ b/arch/arm/mach-mxs/include/mach/vmalloc.h @@ -0,0 +1,22 @@ +/* + * Copyright (C) 2000 Russell King. + * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __MACH_MXS_VMALLOC_H__ +#define __MACH_MXS_VMALLOC_H__ + +/* vmalloc ending address */ +#define VMALLOC_END 0xf4000000UL + +#endif /* __MACH_MXS_VMALLOC_H__ */ diff --git a/arch/arm/mach-mxs/iomux.c b/arch/arm/mach-mxs/iomux.c new file mode 100644 index 00000000000..0e804e2f11f --- /dev/null +++ b/arch/arm/mach-mxs/iomux.c @@ -0,0 +1,101 @@ +/* + * Copyright 2004-2006,2010 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de> + * Copyright (C) 2009 by Jan Weitzel Phytec Messtechnik GmbH, + * <armlinux@phytec.de> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ + +#include <linux/errno.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/string.h> +#include <linux/gpio.h> + +#include <asm/mach/map.h> + +#include <mach/mxs.h> +#include <mach/iomux.h> + +/* + * configures a single pad in the iomuxer + */ +int mxs_iomux_setup_pad(iomux_cfg_t pad) +{ + u32 reg, ofs, bp, bm; + void __iomem *iomux_base = MXS_IO_ADDRESS(MXS_PINCTRL_BASE_ADDR); + + /* muxsel */ + ofs = 0x100; + ofs += PAD_BANK(pad) * 0x20 + PAD_PIN(pad) / 16 * 0x10; + bp = PAD_PIN(pad) % 16 * 2; + bm = 0x3 << bp; + reg = __raw_readl(iomux_base + ofs); + reg &= ~bm; + reg |= PAD_MUXSEL(pad) << bp; + __raw_writel(reg, iomux_base + ofs); + + /* drive */ + ofs = cpu_is_mx23() ? 0x200 : 0x300; + ofs += PAD_BANK(pad) * 0x40 + PAD_PIN(pad) / 8 * 0x10; + /* mA */ + if (PAD_MA_VALID(pad)) { + bp = PAD_PIN(pad) % 8 * 4; + bm = 0x3 << bp; + reg = __raw_readl(iomux_base + ofs); + reg &= ~bm; + reg |= PAD_MA(pad) << bp; + __raw_writel(reg, iomux_base + ofs); + } + /* vol */ + if (PAD_VOL_VALID(pad)) { + bp = PAD_PIN(pad) % 8 * 4 + 2; + if (PAD_VOL(pad)) + __mxs_setl(1 << bp, iomux_base + ofs); + else + __mxs_clrl(1 << bp, iomux_base + ofs); + } + + /* pull */ + if (PAD_PULL_VALID(pad)) { + ofs = cpu_is_mx23() ? 0x400 : 0x600; + ofs += PAD_BANK(pad) * 0x10; + bp = PAD_PIN(pad); + if (PAD_PULL(pad)) + __mxs_setl(1 << bp, iomux_base + ofs); + else + __mxs_clrl(1 << bp, iomux_base + ofs); + } + + return 0; +} + +int mxs_iomux_setup_multiple_pads(const iomux_cfg_t *pad_list, unsigned count) +{ + const iomux_cfg_t *p = pad_list; + int i; + int ret; + + for (i = 0; i < count; i++) { + ret = mxs_iomux_setup_pad(*p); + if (ret) + return ret; + p++; + } + + return 0; +} diff --git a/arch/arm/mach-mxs/mach-mx23evk.c b/arch/arm/mach-mxs/mach-mx23evk.c new file mode 100644 index 00000000000..aa0640052f5 --- /dev/null +++ b/arch/arm/mach-mxs/mach-mx23evk.c @@ -0,0 +1,57 @@ +/* + * Copyright 2010 Freescale Semiconductor, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/delay.h> +#include <linux/platform_device.h> +#include <linux/gpio.h> +#include <linux/irq.h> + +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/time.h> + +#include <mach/common.h> +#include <mach/iomux-mx23.h> + +#include "devices-mx23.h" + +static const iomux_cfg_t mx23evk_pads[] __initconst = { + /* duart */ + MX23_PAD_PWM0__DUART_RX | MXS_PAD_4MA, + MX23_PAD_PWM1__DUART_TX | MXS_PAD_4MA, +}; + +static void __init mx23evk_init(void) +{ + mxs_iomux_setup_multiple_pads(mx23evk_pads, ARRAY_SIZE(mx23evk_pads)); + + mx23_add_duart(); +} + +static void __init mx23evk_timer_init(void) +{ + mx23_clocks_init(); +} + +static struct sys_timer mx23evk_timer = { + .init = mx23evk_timer_init, +}; + +MACHINE_START(MX23EVK, "Freescale MX23 EVK") + /* Maintainer: Freescale Semiconductor, Inc. */ + .map_io = mx23_map_io, + .init_irq = mx23_init_irq, + .init_machine = mx23evk_init, + .timer = &mx23evk_timer, +MACHINE_END diff --git a/arch/arm/mach-mxs/mach-mx28evk.c b/arch/arm/mach-mxs/mach-mx28evk.c new file mode 100644 index 00000000000..d162e95910f --- /dev/null +++ b/arch/arm/mach-mxs/mach-mx28evk.c @@ -0,0 +1,138 @@ +/* + * Copyright 2010 Freescale Semiconductor, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/delay.h> +#include <linux/platform_device.h> +#include <linux/gpio.h> +#include <linux/irq.h> +#include <linux/clk.h> + +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/time.h> + +#include <mach/common.h> +#include <mach/iomux-mx28.h> + +#include "devices-mx28.h" +#include "gpio.h" + +#define MX28EVK_FEC_PHY_POWER MXS_GPIO_NR(2, 15) +#define MX28EVK_FEC_PHY_RESET MXS_GPIO_NR(4, 13) + +static const iomux_cfg_t mx28evk_pads[] __initconst = { + /* duart */ + MX28_PAD_PWM0__DUART_RX | + (MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL), + MX28_PAD_PWM1__DUART_TX | + (MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL), + + /* fec0 */ + MX28_PAD_ENET0_MDC__ENET0_MDC | + (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + MX28_PAD_ENET0_MDIO__ENET0_MDIO | + (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + MX28_PAD_ENET0_RX_EN__ENET0_RX_EN | + (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + MX28_PAD_ENET0_RXD0__ENET0_RXD0 | + (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + MX28_PAD_ENET0_RXD1__ENET0_RXD1 | + (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + MX28_PAD_ENET0_TX_EN__ENET0_TX_EN | + (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + MX28_PAD_ENET0_TXD0__ENET0_TXD0 | + (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + MX28_PAD_ENET0_TXD1__ENET0_TXD1 | + (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + MX28_PAD_ENET_CLK__CLKCTRL_ENET | + (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + /* phy power line */ + MX28_PAD_SSP1_DATA3__GPIO_2_15 | + (MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL), + /* phy reset line */ + MX28_PAD_ENET0_RX_CLK__GPIO_4_13 | + (MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL), +}; + +/* fec */ +static void __init mx28evk_fec_reset(void) +{ + int ret; + struct clk *clk; + + /* Enable fec phy clock */ + clk = clk_get_sys("pll2", NULL); + if (!IS_ERR(clk)) + clk_enable(clk); + + /* Power up fec phy */ + ret = gpio_request(MX28EVK_FEC_PHY_POWER, "fec-phy-power"); + if (ret) { + pr_err("Failed to request gpio fec-phy-%s: %d\n", "power", ret); + return; + } + + ret = gpio_direction_output(MX28EVK_FEC_PHY_POWER, 0); + if (ret) { + pr_err("Failed to drive gpio fec-phy-%s: %d\n", "power", ret); + return; + } + + /* Reset fec phy */ + ret = gpio_request(MX28EVK_FEC_PHY_RESET, "fec-phy-reset"); + if (ret) { + pr_err("Failed to request gpio fec-phy-%s: %d\n", "reset", ret); + return; + } + + gpio_direction_output(MX28EVK_FEC_PHY_RESET, 0); + if (ret) { + pr_err("Failed to drive gpio fec-phy-%s: %d\n", "reset", ret); + return; + } + + mdelay(1); + gpio_set_value(MX28EVK_FEC_PHY_RESET, 1); +} + +static const struct fec_platform_data mx28_fec_pdata __initconst = { + .phy = PHY_INTERFACE_MODE_RMII, +}; + +static void __init mx28evk_init(void) +{ + mxs_iomux_setup_multiple_pads(mx28evk_pads, ARRAY_SIZE(mx28evk_pads)); + + mx28_add_duart(); + + mx28evk_fec_reset(); + mx28_add_fec(0, &mx28_fec_pdata); +} + +static void __init mx28evk_timer_init(void) +{ + mx28_clocks_init(); +} + +static struct sys_timer mx28evk_timer = { + .init = mx28evk_timer_init, +}; + +MACHINE_START(MX28EVK, "Freescale MX28 EVK") + /* Maintainer: Freescale Semiconductor, Inc. */ + .map_io = mx28_map_io, + .init_irq = mx28_init_irq, + .init_machine = mx28evk_init, + .timer = &mx28evk_timer, +MACHINE_END diff --git a/arch/arm/mach-mxs/mm-mx23.c b/arch/arm/mach-mxs/mm-mx23.c new file mode 100644 index 00000000000..5148cd64a6b --- /dev/null +++ b/arch/arm/mach-mxs/mm-mx23.c @@ -0,0 +1,45 @@ +/* + * Copyright 2008-2010 Freescale Semiconductor, Inc. All Rights Reserved. + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + * + * Create static mapping between physical to virtual memory. + */ + +#include <linux/mm.h> +#include <linux/init.h> + +#include <asm/mach/map.h> + +#include <mach/mx23.h> +#include <mach/common.h> +#include <mach/iomux.h> + +/* + * Define the MX23 memory map. + */ +static struct map_desc mx23_io_desc[] __initdata = { + mxs_map_entry(MX23, OCRAM, MT_DEVICE), + mxs_map_entry(MX23, IO, MT_DEVICE), +}; + +/* + * This function initializes the memory map. It is called during the + * system startup to create static physical to virtual memory mappings + * for the IO modules. + */ +void __init mx23_map_io(void) +{ + iotable_init(mx23_io_desc, ARRAY_SIZE(mx23_io_desc)); +} + +void __init mx23_init_irq(void) +{ + icoll_init_irq(); + mx23_register_gpios(); +} diff --git a/arch/arm/mach-mxs/mm-mx28.c b/arch/arm/mach-mxs/mm-mx28.c new file mode 100644 index 00000000000..7e4cea32ebc --- /dev/null +++ b/arch/arm/mach-mxs/mm-mx28.c @@ -0,0 +1,45 @@ +/* + * Copyright 2008-2010 Freescale Semiconductor, Inc. All Rights Reserved. + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + * + * Create static mapping between physical to virtual memory. + */ + +#include <linux/mm.h> +#include <linux/init.h> + +#include <asm/mach/map.h> + +#include <mach/mx28.h> +#include <mach/common.h> +#include <mach/iomux.h> + +/* + * Define the MX28 memory map. + */ +static struct map_desc mx28_io_desc[] __initdata = { + mxs_map_entry(MX28, OCRAM, MT_DEVICE), + mxs_map_entry(MX28, IO, MT_DEVICE), +}; + +/* + * This function initializes the memory map. It is called during the + * system startup to create static physical to virtual memory mappings + * for the IO modules. + */ +void __init mx28_map_io(void) +{ + iotable_init(mx28_io_desc, ARRAY_SIZE(mx28_io_desc)); +} + +void __init mx28_init_irq(void) +{ + icoll_init_irq(); + mx28_register_gpios(); +} diff --git a/arch/arm/mach-mxs/regs-clkctrl-mx23.h b/arch/arm/mach-mxs/regs-clkctrl-mx23.h new file mode 100644 index 00000000000..dbc04747b69 --- /dev/null +++ b/arch/arm/mach-mxs/regs-clkctrl-mx23.h @@ -0,0 +1,455 @@ +/* + * Freescale CLKCTRL Register Definitions + * + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + * Copyright 2008-2010 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * This file is created by xml file. Don't Edit it. + * + * Xml Revision: 1.48 + * Template revision: 26195 + */ + +#ifndef __REGS_CLKCTRL_MX23_H__ +#define __REGS_CLKCTRL_MX23_H__ + + +#define HW_CLKCTRL_PLLCTRL0 (0x00000000) +#define HW_CLKCTRL_PLLCTRL0_SET (0x00000004) +#define HW_CLKCTRL_PLLCTRL0_CLR (0x00000008) +#define HW_CLKCTRL_PLLCTRL0_TOG (0x0000000c) + +#define BP_CLKCTRL_PLLCTRL0_RSRVD6 30 +#define BM_CLKCTRL_PLLCTRL0_RSRVD6 0xC0000000 +#define BF_CLKCTRL_PLLCTRL0_RSRVD6(v) \ + (((v) << 30) & BM_CLKCTRL_PLLCTRL0_RSRVD6) +#define BP_CLKCTRL_PLLCTRL0_LFR_SEL 28 +#define BM_CLKCTRL_PLLCTRL0_LFR_SEL 0x30000000 +#define BF_CLKCTRL_PLLCTRL0_LFR_SEL(v) \ + (((v) << 28) & BM_CLKCTRL_PLLCTRL0_LFR_SEL) +#define BV_CLKCTRL_PLLCTRL0_LFR_SEL__DEFAULT 0x0 +#define BV_CLKCTRL_PLLCTRL0_LFR_SEL__TIMES_2 0x1 +#define BV_CLKCTRL_PLLCTRL0_LFR_SEL__TIMES_05 0x2 +#define BV_CLKCTRL_PLLCTRL0_LFR_SEL__UNDEFINED 0x3 +#define BP_CLKCTRL_PLLCTRL0_RSRVD5 26 +#define BM_CLKCTRL_PLLCTRL0_RSRVD5 0x0C000000 +#define BF_CLKCTRL_PLLCTRL0_RSRVD5(v) \ + (((v) << 26) & BM_CLKCTRL_PLLCTRL0_RSRVD5) +#define BP_CLKCTRL_PLLCTRL0_CP_SEL 24 +#define BM_CLKCTRL_PLLCTRL0_CP_SEL 0x03000000 +#define BF_CLKCTRL_PLLCTRL0_CP_SEL(v) \ + (((v) << 24) & BM_CLKCTRL_PLLCTRL0_CP_SEL) +#define BV_CLKCTRL_PLLCTRL0_CP_SEL__DEFAULT 0x0 +#define BV_CLKCTRL_PLLCTRL0_CP_SEL__TIMES_2 0x1 +#define BV_CLKCTRL_PLLCTRL0_CP_SEL__TIMES_05 0x2 +#define BV_CLKCTRL_PLLCTRL0_CP_SEL__UNDEFINED 0x3 +#define BP_CLKCTRL_PLLCTRL0_RSRVD4 22 +#define BM_CLKCTRL_PLLCTRL0_RSRVD4 0x00C00000 +#define BF_CLKCTRL_PLLCTRL0_RSRVD4(v) \ + (((v) << 22) & BM_CLKCTRL_PLLCTRL0_RSRVD4) +#define BP_CLKCTRL_PLLCTRL0_DIV_SEL 20 +#define BM_CLKCTRL_PLLCTRL0_DIV_SEL 0x00300000 +#define BF_CLKCTRL_PLLCTRL0_DIV_SEL(v) \ + (((v) << 20) & BM_CLKCTRL_PLLCTRL0_DIV_SEL) +#define BV_CLKCTRL_PLLCTRL0_DIV_SEL__DEFAULT 0x0 +#define BV_CLKCTRL_PLLCTRL0_DIV_SEL__LOWER 0x1 +#define BV_CLKCTRL_PLLCTRL0_DIV_SEL__LOWEST 0x2 +#define BV_CLKCTRL_PLLCTRL0_DIV_SEL__UNDEFINED 0x3 +#define BM_CLKCTRL_PLLCTRL0_RSRVD3 0x00080000 +#define BM_CLKCTRL_PLLCTRL0_EN_USB_CLKS 0x00040000 +#define BM_CLKCTRL_PLLCTRL0_RSRVD2 0x00020000 +#define BM_CLKCTRL_PLLCTRL0_POWER 0x00010000 +#define BP_CLKCTRL_PLLCTRL0_RSRVD1 0 +#define BM_CLKCTRL_PLLCTRL0_RSRVD1 0x0000FFFF +#define BF_CLKCTRL_PLLCTRL0_RSRVD1(v) \ + (((v) << 0) & BM_CLKCTRL_PLLCTRL0_RSRVD1) + +#define HW_CLKCTRL_PLLCTRL1 (0x00000010) + +#define BM_CLKCTRL_PLLCTRL1_LOCK 0x80000000 +#define BM_CLKCTRL_PLLCTRL1_FORCE_LOCK 0x40000000 +#define BP_CLKCTRL_PLLCTRL1_RSRVD1 16 +#define BM_CLKCTRL_PLLCTRL1_RSRVD1 0x3FFF0000 +#define BF_CLKCTRL_PLLCTRL1_RSRVD1(v) \ + (((v) << 16) & BM_CLKCTRL_PLLCTRL1_RSRVD1) +#define BP_CLKCTRL_PLLCTRL1_LOCK_COUNT 0 +#define BM_CLKCTRL_PLLCTRL1_LOCK_COUNT 0x0000FFFF +#define BF_CLKCTRL_PLLCTRL1_LOCK_COUNT(v) \ + (((v) << 0) & BM_CLKCTRL_PLLCTRL1_LOCK_COUNT) + +#define HW_CLKCTRL_CPU (0x00000020) +#define HW_CLKCTRL_CPU_SET (0x00000024) +#define HW_CLKCTRL_CPU_CLR (0x00000028) +#define HW_CLKCTRL_CPU_TOG (0x0000002c) + +#define BP_CLKCTRL_CPU_RSRVD5 30 +#define BM_CLKCTRL_CPU_RSRVD5 0xC0000000 +#define BF_CLKCTRL_CPU_RSRVD5(v) \ + (((v) << 30) & BM_CLKCTRL_CPU_RSRVD5) +#define BM_CLKCTRL_CPU_BUSY_REF_XTAL 0x20000000 +#define BM_CLKCTRL_CPU_BUSY_REF_CPU 0x10000000 +#define BM_CLKCTRL_CPU_RSRVD4 0x08000000 +#define BM_CLKCTRL_CPU_DIV_XTAL_FRAC_EN 0x04000000 +#define BP_CLKCTRL_CPU_DIV_XTAL 16 +#define BM_CLKCTRL_CPU_DIV_XTAL 0x03FF0000 +#define BF_CLKCTRL_CPU_DIV_XTAL(v) \ + (((v) << 16) & BM_CLKCTRL_CPU_DIV_XTAL) +#define BP_CLKCTRL_CPU_RSRVD3 13 +#define BM_CLKCTRL_CPU_RSRVD3 0x0000E000 +#define BF_CLKCTRL_CPU_RSRVD3(v) \ + (((v) << 13) & BM_CLKCTRL_CPU_RSRVD3) +#define BM_CLKCTRL_CPU_INTERRUPT_WAIT 0x00001000 +#define BM_CLKCTRL_CPU_RSRVD2 0x00000800 +#define BM_CLKCTRL_CPU_DIV_CPU_FRAC_EN 0x00000400 +#define BP_CLKCTRL_CPU_RSRVD1 6 +#define BM_CLKCTRL_CPU_RSRVD1 0x000003C0 +#define BF_CLKCTRL_CPU_RSRVD1(v) \ + (((v) << 6) & BM_CLKCTRL_CPU_RSRVD1) +#define BP_CLKCTRL_CPU_DIV_CPU 0 +#define BM_CLKCTRL_CPU_DIV_CPU 0x0000003F +#define BF_CLKCTRL_CPU_DIV_CPU(v) \ + (((v) << 0) & BM_CLKCTRL_CPU_DIV_CPU) + +#define HW_CLKCTRL_HBUS (0x00000030) +#define HW_CLKCTRL_HBUS_SET (0x00000034) +#define HW_CLKCTRL_HBUS_CLR (0x00000038) +#define HW_CLKCTRL_HBUS_TOG (0x0000003c) + +#define BP_CLKCTRL_HBUS_RSRVD4 30 +#define BM_CLKCTRL_HBUS_RSRVD4 0xC0000000 +#define BF_CLKCTRL_HBUS_RSRVD4(v) \ + (((v) << 30) & BM_CLKCTRL_HBUS_RSRVD4) +#define BM_CLKCTRL_HBUS_BUSY 0x20000000 +#define BM_CLKCTRL_HBUS_DCP_AS_ENABLE 0x10000000 +#define BM_CLKCTRL_HBUS_PXP_AS_ENABLE 0x08000000 +#define BM_CLKCTRL_HBUS_APBHDMA_AS_ENABLE 0x04000000 +#define BM_CLKCTRL_HBUS_APBXDMA_AS_ENABLE 0x02000000 +#define BM_CLKCTRL_HBUS_TRAFFIC_JAM_AS_ENABLE 0x01000000 +#define BM_CLKCTRL_HBUS_TRAFFIC_AS_ENABLE 0x00800000 +#define BM_CLKCTRL_HBUS_CPU_DATA_AS_ENABLE 0x00400000 +#define BM_CLKCTRL_HBUS_CPU_INSTR_AS_ENABLE 0x00200000 +#define BM_CLKCTRL_HBUS_AUTO_SLOW_MODE 0x00100000 +#define BM_CLKCTRL_HBUS_RSRVD2 0x00080000 +#define BP_CLKCTRL_HBUS_SLOW_DIV 16 +#define BM_CLKCTRL_HBUS_SLOW_DIV 0x00070000 +#define BF_CLKCTRL_HBUS_SLOW_DIV(v) \ + (((v) << 16) & BM_CLKCTRL_HBUS_SLOW_DIV) +#define BV_CLKCTRL_HBUS_SLOW_DIV__BY1 0x0 +#define BV_CLKCTRL_HBUS_SLOW_DIV__BY2 0x1 +#define BV_CLKCTRL_HBUS_SLOW_DIV__BY4 0x2 +#define BV_CLKCTRL_HBUS_SLOW_DIV__BY8 0x3 +#define BV_CLKCTRL_HBUS_SLOW_DIV__BY16 0x4 +#define BV_CLKCTRL_HBUS_SLOW_DIV__BY32 0x5 +#define BP_CLKCTRL_HBUS_RSRVD1 6 +#define BM_CLKCTRL_HBUS_RSRVD1 0x0000FFC0 +#define BF_CLKCTRL_HBUS_RSRVD1(v) \ + (((v) << 6) & BM_CLKCTRL_HBUS_RSRVD1) +#define BM_CLKCTRL_HBUS_DIV_FRAC_EN 0x00000020 +#define BP_CLKCTRL_HBUS_DIV 0 +#define BM_CLKCTRL_HBUS_DIV 0x0000001F +#define BF_CLKCTRL_HBUS_DIV(v) \ + (((v) << 0) & BM_CLKCTRL_HBUS_DIV) + +#define HW_CLKCTRL_XBUS (0x00000040) + +#define BM_CLKCTRL_XBUS_BUSY 0x80000000 +#define BP_CLKCTRL_XBUS_RSRVD1 11 +#define BM_CLKCTRL_XBUS_RSRVD1 0x7FFFF800 +#define BF_CLKCTRL_XBUS_RSRVD1(v) \ + (((v) << 11) & BM_CLKCTRL_XBUS_RSRVD1) +#define BM_CLKCTRL_XBUS_DIV_FRAC_EN 0x00000400 +#define BP_CLKCTRL_XBUS_DIV 0 +#define BM_CLKCTRL_XBUS_DIV 0x000003FF +#define BF_CLKCTRL_XBUS_DIV(v) \ + (((v) << 0) & BM_CLKCTRL_XBUS_DIV) + +#define HW_CLKCTRL_XTAL (0x00000050) +#define HW_CLKCTRL_XTAL_SET (0x00000054) +#define HW_CLKCTRL_XTAL_CLR (0x00000058) +#define HW_CLKCTRL_XTAL_TOG (0x0000005c) + +#define BP_CLKCTRL_XTAL_UART_CLK_GATE 31 +#define BM_CLKCTRL_XTAL_UART_CLK_GATE 0x80000000 +#define BP_CLKCTRL_XTAL_FILT_CLK24M_GATE 30 +#define BM_CLKCTRL_XTAL_FILT_CLK24M_GATE 0x40000000 +#define BP_CLKCTRL_XTAL_PWM_CLK24M_GATE 29 +#define BM_CLKCTRL_XTAL_PWM_CLK24M_GATE 0x20000000 +#define BM_CLKCTRL_XTAL_DRI_CLK24M_GATE 0x10000000 +#define BM_CLKCTRL_XTAL_DIGCTRL_CLK1M_GATE 0x08000000 +#define BP_CLKCTRL_XTAL_TIMROT_CLK32K_GATE 26 +#define BM_CLKCTRL_XTAL_TIMROT_CLK32K_GATE 0x04000000 +#define BP_CLKCTRL_XTAL_RSRVD1 2 +#define BM_CLKCTRL_XTAL_RSRVD1 0x03FFFFFC +#define BF_CLKCTRL_XTAL_RSRVD1(v) \ + (((v) << 2) & BM_CLKCTRL_XTAL_RSRVD1) +#define BP_CLKCTRL_XTAL_DIV_UART 0 +#define BM_CLKCTRL_XTAL_DIV_UART 0x00000003 +#define BF_CLKCTRL_XTAL_DIV_UART(v) \ + (((v) << 0) & BM_CLKCTRL_XTAL_DIV_UART) + +#define HW_CLKCTRL_PIX (0x00000060) + +#define BP_CLKCTRL_PIX_CLKGATE 31 +#define BM_CLKCTRL_PIX_CLKGATE 0x80000000 +#define BM_CLKCTRL_PIX_RSRVD2 0x40000000 +#define BM_CLKCTRL_PIX_BUSY 0x20000000 +#define BP_CLKCTRL_PIX_RSRVD1 13 +#define BM_CLKCTRL_PIX_RSRVD1 0x1FFFE000 +#define BF_CLKCTRL_PIX_RSRVD1(v) \ + (((v) << 13) & BM_CLKCTRL_PIX_RSRVD1) +#define BM_CLKCTRL_PIX_DIV_FRAC_EN 0x00001000 +#define BP_CLKCTRL_PIX_DIV 0 +#define BM_CLKCTRL_PIX_DIV 0x00000FFF +#define BF_CLKCTRL_PIX_DIV(v) \ + (((v) << 0) & BM_CLKCTRL_PIX_DIV) + +#define HW_CLKCTRL_SSP (0x00000070) + +#define BP_CLKCTRL_SSP_CLKGATE 31 +#define BM_CLKCTRL_SSP_CLKGATE 0x80000000 +#define BM_CLKCTRL_SSP_RSRVD2 0x40000000 +#define BM_CLKCTRL_SSP_BUSY 0x20000000 +#define BP_CLKCTRL_SSP_RSRVD1 10 +#define BM_CLKCTRL_SSP_RSRVD1 0x1FFFFC00 +#define BF_CLKCTRL_SSP_RSRVD1(v) \ + (((v) << 10) & BM_CLKCTRL_SSP_RSRVD1) +#define BM_CLKCTRL_SSP_DIV_FRAC_EN 0x00000200 +#define BP_CLKCTRL_SSP_DIV 0 +#define BM_CLKCTRL_SSP_DIV 0x000001FF +#define BF_CLKCTRL_SSP_DIV(v) \ + (((v) << 0) & BM_CLKCTRL_SSP_DIV) + +#define HW_CLKCTRL_GPMI (0x00000080) + +#define BP_CLKCTRL_GPMI_CLKGATE 31 +#define BM_CLKCTRL_GPMI_CLKGATE 0x80000000 +#define BM_CLKCTRL_GPMI_RSRVD2 0x40000000 +#define BM_CLKCTRL_GPMI_BUSY 0x20000000 +#define BP_CLKCTRL_GPMI_RSRVD1 11 +#define BM_CLKCTRL_GPMI_RSRVD1 0x1FFFF800 +#define BF_CLKCTRL_GPMI_RSRVD1(v) \ + (((v) << 11) & BM_CLKCTRL_GPMI_RSRVD1) +#define BM_CLKCTRL_GPMI_DIV_FRAC_EN 0x00000400 +#define BP_CLKCTRL_GPMI_DIV 0 +#define BM_CLKCTRL_GPMI_DIV 0x000003FF +#define BF_CLKCTRL_GPMI_DIV(v) \ + (((v) << 0) & BM_CLKCTRL_GPMI_DIV) + +#define HW_CLKCTRL_SPDIF (0x00000090) + +#define BM_CLKCTRL_SPDIF_CLKGATE 0x80000000 +#define BP_CLKCTRL_SPDIF_RSRVD 0 +#define BM_CLKCTRL_SPDIF_RSRVD 0x7FFFFFFF +#define BF_CLKCTRL_SPDIF_RSRVD(v) \ + (((v) << 0) & BM_CLKCTRL_SPDIF_RSRVD) + +#define HW_CLKCTRL_EMI (0x000000a0) + +#define BP_CLKCTRL_EMI_CLKGATE 31 +#define BM_CLKCTRL_EMI_CLKGATE 0x80000000 +#define BM_CLKCTRL_EMI_SYNC_MODE_EN 0x40000000 +#define BM_CLKCTRL_EMI_BUSY_REF_XTAL 0x20000000 +#define BM_CLKCTRL_EMI_BUSY_REF_EMI 0x10000000 +#define BM_CLKCTRL_EMI_BUSY_REF_CPU 0x08000000 +#define BM_CLKCTRL_EMI_BUSY_SYNC_MODE 0x04000000 +#define BP_CLKCTRL_EMI_RSRVD3 18 +#define BM_CLKCTRL_EMI_RSRVD3 0x03FC0000 +#define BF_CLKCTRL_EMI_RSRVD3(v) \ + (((v) << 18) & BM_CLKCTRL_EMI_RSRVD3) +#define BM_CLKCTRL_EMI_BUSY_DCC_RESYNC 0x00020000 +#define BM_CLKCTRL_EMI_DCC_RESYNC_ENABLE 0x00010000 +#define BP_CLKCTRL_EMI_RSRVD2 12 +#define BM_CLKCTRL_EMI_RSRVD2 0x0000F000 +#define BF_CLKCTRL_EMI_RSRVD2(v) \ + (((v) << 12) & BM_CLKCTRL_EMI_RSRVD2) +#define BP_CLKCTRL_EMI_DIV_XTAL 8 +#define BM_CLKCTRL_EMI_DIV_XTAL 0x00000F00 +#define BF_CLKCTRL_EMI_DIV_XTAL(v) \ + (((v) << 8) & BM_CLKCTRL_EMI_DIV_XTAL) +#define BP_CLKCTRL_EMI_RSRVD1 6 +#define BM_CLKCTRL_EMI_RSRVD1 0x000000C0 +#define BF_CLKCTRL_EMI_RSRVD1(v) \ + (((v) << 6) & BM_CLKCTRL_EMI_RSRVD1) +#define BP_CLKCTRL_EMI_DIV_EMI 0 +#define BM_CLKCTRL_EMI_DIV_EMI 0x0000003F +#define BF_CLKCTRL_EMI_DIV_EMI(v) \ + (((v) << 0) & BM_CLKCTRL_EMI_DIV_EMI) + +#define HW_CLKCTRL_IR (0x000000b0) + +#define BM_CLKCTRL_IR_CLKGATE 0x80000000 +#define BM_CLKCTRL_IR_RSRVD3 0x40000000 +#define BM_CLKCTRL_IR_AUTO_DIV 0x20000000 +#define BM_CLKCTRL_IR_IR_BUSY 0x10000000 +#define BM_CLKCTRL_IR_IROV_BUSY 0x08000000 +#define BP_CLKCTRL_IR_RSRVD2 25 +#define BM_CLKCTRL_IR_RSRVD2 0x06000000 +#define BF_CLKCTRL_IR_RSRVD2(v) \ + (((v) << 25) & BM_CLKCTRL_IR_RSRVD2) +#define BP_CLKCTRL_IR_IROV_DIV 16 +#define BM_CLKCTRL_IR_IROV_DIV 0x01FF0000 +#define BF_CLKCTRL_IR_IROV_DIV(v) \ + (((v) << 16) & BM_CLKCTRL_IR_IROV_DIV) +#define BP_CLKCTRL_IR_RSRVD1 10 +#define BM_CLKCTRL_IR_RSRVD1 0x0000FC00 +#define BF_CLKCTRL_IR_RSRVD1(v) \ + (((v) << 10) & BM_CLKCTRL_IR_RSRVD1) +#define BP_CLKCTRL_IR_IR_DIV 0 +#define BM_CLKCTRL_IR_IR_DIV 0x000003FF +#define BF_CLKCTRL_IR_IR_DIV(v) \ + (((v) << 0) & BM_CLKCTRL_IR_IR_DIV) + +#define HW_CLKCTRL_SAIF (0x000000c0) + +#define BM_CLKCTRL_SAIF_CLKGATE 0x80000000 +#define BM_CLKCTRL_SAIF_RSRVD2 0x40000000 +#define BM_CLKCTRL_SAIF_BUSY 0x20000000 +#define BP_CLKCTRL_SAIF_RSRVD1 17 +#define BM_CLKCTRL_SAIF_RSRVD1 0x1FFE0000 +#define BF_CLKCTRL_SAIF_RSRVD1(v) \ + (((v) << 17) & BM_CLKCTRL_SAIF_RSRVD1) +#define BM_CLKCTRL_SAIF_DIV_FRAC_EN 0x00010000 +#define BP_CLKCTRL_SAIF_DIV 0 +#define BM_CLKCTRL_SAIF_DIV 0x0000FFFF +#define BF_CLKCTRL_SAIF_DIV(v) \ + (((v) << 0) & BM_CLKCTRL_SAIF_DIV) + +#define HW_CLKCTRL_TV (0x000000d0) + +#define BM_CLKCTRL_TV_CLK_TV108M_GATE 0x80000000 +#define BM_CLKCTRL_TV_CLK_TV_GATE 0x40000000 +#define BP_CLKCTRL_TV_RSRVD 0 +#define BM_CLKCTRL_TV_RSRVD 0x3FFFFFFF +#define BF_CLKCTRL_TV_RSRVD(v) \ + (((v) << 0) & BM_CLKCTRL_TV_RSRVD) + +#define HW_CLKCTRL_ETM (0x000000e0) + +#define BM_CLKCTRL_ETM_CLKGATE 0x80000000 +#define BM_CLKCTRL_ETM_RSRVD2 0x40000000 +#define BM_CLKCTRL_ETM_BUSY 0x20000000 +#define BP_CLKCTRL_ETM_RSRVD1 7 +#define BM_CLKCTRL_ETM_RSRVD1 0x1FFFFF80 +#define BF_CLKCTRL_ETM_RSRVD1(v) \ + (((v) << 7) & BM_CLKCTRL_ETM_RSRVD1) +#define BM_CLKCTRL_ETM_DIV_FRAC_EN 0x00000040 +#define BP_CLKCTRL_ETM_DIV 0 +#define BM_CLKCTRL_ETM_DIV 0x0000003F +#define BF_CLKCTRL_ETM_DIV(v) \ + (((v) << 0) & BM_CLKCTRL_ETM_DIV) + +#define HW_CLKCTRL_FRAC (0x000000f0) +#define HW_CLKCTRL_FRAC_SET (0x000000f4) +#define HW_CLKCTRL_FRAC_CLR (0x000000f8) +#define HW_CLKCTRL_FRAC_TOG (0x000000fc) + +#define BP_CLKCTRL_FRAC_CLKGATEIO 31 +#define BM_CLKCTRL_FRAC_CLKGATEIO 0x80000000 +#define BM_CLKCTRL_FRAC_IO_STABLE 0x40000000 +#define BP_CLKCTRL_FRAC_IOFRAC 24 +#define BM_CLKCTRL_FRAC_IOFRAC 0x3F000000 +#define BF_CLKCTRL_FRAC_IOFRAC(v) \ + (((v) << 24) & BM_CLKCTRL_FRAC_IOFRAC) +#define BP_CLKCTRL_FRAC_CLKGATEPIX 23 +#define BM_CLKCTRL_FRAC_CLKGATEPIX 0x00800000 +#define BM_CLKCTRL_FRAC_PIX_STABLE 0x00400000 +#define BP_CLKCTRL_FRAC_PIXFRAC 16 +#define BM_CLKCTRL_FRAC_PIXFRAC 0x003F0000 +#define BF_CLKCTRL_FRAC_PIXFRAC(v) \ + (((v) << 16) & BM_CLKCTRL_FRAC_PIXFRAC) +#define BP_CLKCTRL_FRAC_CLKGATEEMI 15 +#define BM_CLKCTRL_FRAC_CLKGATEEMI 0x00008000 +#define BM_CLKCTRL_FRAC_EMI_STABLE 0x00004000 +#define BP_CLKCTRL_FRAC_EMIFRAC 8 +#define BM_CLKCTRL_FRAC_EMIFRAC 0x00003F00 +#define BF_CLKCTRL_FRAC_EMIFRAC(v) \ + (((v) << 8) & BM_CLKCTRL_FRAC_EMIFRAC) +#define BP_CLKCTRL_FRAC_CLKGATECPU 7 +#define BM_CLKCTRL_FRAC_CLKGATECPU 0x00000080 +#define BM_CLKCTRL_FRAC_CPU_STABLE 0x00000040 +#define BP_CLKCTRL_FRAC_CPUFRAC 0 +#define BM_CLKCTRL_FRAC_CPUFRAC 0x0000003F +#define BF_CLKCTRL_FRAC_CPUFRAC(v) \ + (((v) << 0) & BM_CLKCTRL_FRAC_CPUFRAC) + +#define HW_CLKCTRL_FRAC1 (0x00000100) +#define HW_CLKCTRL_FRAC1_SET (0x00000104) +#define HW_CLKCTRL_FRAC1_CLR (0x00000108) +#define HW_CLKCTRL_FRAC1_TOG (0x0000010c) + +#define BM_CLKCTRL_FRAC1_CLKGATEVID 0x80000000 +#define BM_CLKCTRL_FRAC1_VID_STABLE 0x40000000 +#define BP_CLKCTRL_FRAC1_RSRVD1 0 +#define BM_CLKCTRL_FRAC1_RSRVD1 0x3FFFFFFF +#define BF_CLKCTRL_FRAC1_RSRVD1(v) \ + (((v) << 0) & BM_CLKCTRL_FRAC1_RSRVD1) + +#define HW_CLKCTRL_CLKSEQ (0x00000110) +#define HW_CLKCTRL_CLKSEQ_SET (0x00000114) +#define HW_CLKCTRL_CLKSEQ_CLR (0x00000118) +#define HW_CLKCTRL_CLKSEQ_TOG (0x0000011c) + +#define BP_CLKCTRL_CLKSEQ_RSRVD1 9 +#define BM_CLKCTRL_CLKSEQ_RSRVD1 0xFFFFFE00 +#define BF_CLKCTRL_CLKSEQ_RSRVD1(v) \ + (((v) << 9) & BM_CLKCTRL_CLKSEQ_RSRVD1) +#define BM_CLKCTRL_CLKSEQ_BYPASS_ETM 0x00000100 +#define BM_CLKCTRL_CLKSEQ_BYPASS_CPU 0x00000080 +#define BM_CLKCTRL_CLKSEQ_BYPASS_EMI 0x00000040 +#define BM_CLKCTRL_CLKSEQ_BYPASS_SSP 0x00000020 +#define BM_CLKCTRL_CLKSEQ_BYPASS_GPMI 0x00000010 +#define BM_CLKCTRL_CLKSEQ_BYPASS_IR 0x00000008 +#define BM_CLKCTRL_CLKSEQ_RSRVD0 0x00000004 +#define BM_CLKCTRL_CLKSEQ_BYPASS_PIX 0x00000002 +#define BM_CLKCTRL_CLKSEQ_BYPASS_SAIF 0x00000001 + +#define HW_CLKCTRL_RESET (0x00000120) + +#define BP_CLKCTRL_RESET_RSRVD 2 +#define BM_CLKCTRL_RESET_RSRVD 0xFFFFFFFC +#define BF_CLKCTRL_RESET_RSRVD(v) \ + (((v) << 2) & BM_CLKCTRL_RESET_RSRVD) +#define BM_CLKCTRL_RESET_CHIP 0x00000002 +#define BM_CLKCTRL_RESET_DIG 0x00000001 + +#define HW_CLKCTRL_STATUS (0x00000130) + +#define BP_CLKCTRL_STATUS_CPU_LIMIT 30 +#define BM_CLKCTRL_STATUS_CPU_LIMIT 0xC0000000 +#define BF_CLKCTRL_STATUS_CPU_LIMIT(v) \ + (((v) << 30) & BM_CLKCTRL_STATUS_CPU_LIMIT) +#define BP_CLKCTRL_STATUS_RSRVD 0 +#define BM_CLKCTRL_STATUS_RSRVD 0x3FFFFFFF +#define BF_CLKCTRL_STATUS_RSRVD(v) \ + (((v) << 0) & BM_CLKCTRL_STATUS_RSRVD) + +#define HW_CLKCTRL_VERSION (0x00000140) + +#define BP_CLKCTRL_VERSION_MAJOR 24 +#define BM_CLKCTRL_VERSION_MAJOR 0xFF000000 +#define BF_CLKCTRL_VERSION_MAJOR(v) \ + (((v) << 24) & BM_CLKCTRL_VERSION_MAJOR) +#define BP_CLKCTRL_VERSION_MINOR 16 +#define BM_CLKCTRL_VERSION_MINOR 0x00FF0000 +#define BF_CLKCTRL_VERSION_MINOR(v) \ + (((v) << 16) & BM_CLKCTRL_VERSION_MINOR) +#define BP_CLKCTRL_VERSION_STEP 0 +#define BM_CLKCTRL_VERSION_STEP 0x0000FFFF +#define BF_CLKCTRL_VERSION_STEP(v) \ + (((v) << 0) & BM_CLKCTRL_VERSION_STEP) + +#endif /* __REGS_CLKCTRL_MX23_H__ */ diff --git a/arch/arm/mach-mxs/regs-clkctrl-mx28.h b/arch/arm/mach-mxs/regs-clkctrl-mx28.h new file mode 100644 index 00000000000..661df18755f --- /dev/null +++ b/arch/arm/mach-mxs/regs-clkctrl-mx28.h @@ -0,0 +1,663 @@ +/* + * Freescale CLKCTRL Register Definitions + * + * Copyright 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * This file is created by xml file. Don't Edit it. + * + * Xml Revision: 1.48 + * Template revision: 26195 + */ + +#ifndef __REGS_CLKCTRL_MX28_H__ +#define __REGS_CLKCTRL_MX28_H__ + +#define HW_CLKCTRL_PLL0CTRL0 (0x00000000) +#define HW_CLKCTRL_PLL0CTRL0_SET (0x00000004) +#define HW_CLKCTRL_PLL0CTRL0_CLR (0x00000008) +#define HW_CLKCTRL_PLL0CTRL0_TOG (0x0000000c) + +#define BP_CLKCTRL_PLL0CTRL0_RSRVD6 30 +#define BM_CLKCTRL_PLL0CTRL0_RSRVD6 0xC0000000 +#define BF_CLKCTRL_PLL0CTRL0_RSRVD6(v) \ + (((v) << 30) & BM_CLKCTRL_PLL0CTRL0_RSRVD6) +#define BP_CLKCTRL_PLL0CTRL0_LFR_SEL 28 +#define BM_CLKCTRL_PLL0CTRL0_LFR_SEL 0x30000000 +#define BF_CLKCTRL_PLL0CTRL0_LFR_SEL(v) \ + (((v) << 28) & BM_CLKCTRL_PLL0CTRL0_LFR_SEL) +#define BV_CLKCTRL_PLL0CTRL0_LFR_SEL__DEFAULT 0x0 +#define BV_CLKCTRL_PLL0CTRL0_LFR_SEL__TIMES_2 0x1 +#define BV_CLKCTRL_PLL0CTRL0_LFR_SEL__TIMES_05 0x2 +#define BV_CLKCTRL_PLL0CTRL0_LFR_SEL__UNDEFINED 0x3 +#define BP_CLKCTRL_PLL0CTRL0_RSRVD5 26 +#define BM_CLKCTRL_PLL0CTRL0_RSRVD5 0x0C000000 +#define BF_CLKCTRL_PLL0CTRL0_RSRVD5(v) \ + (((v) << 26) & BM_CLKCTRL_PLL0CTRL0_RSRVD5) +#define BP_CLKCTRL_PLL0CTRL0_CP_SEL 24 +#define BM_CLKCTRL_PLL0CTRL0_CP_SEL 0x03000000 +#define BF_CLKCTRL_PLL0CTRL0_CP_SEL(v) \ + (((v) << 24) & BM_CLKCTRL_PLL0CTRL0_CP_SEL) +#define BV_CLKCTRL_PLL0CTRL0_CP_SEL__DEFAULT 0x0 +#define BV_CLKCTRL_PLL0CTRL0_CP_SEL__TIMES_2 0x1 +#define BV_CLKCTRL_PLL0CTRL0_CP_SEL__TIMES_05 0x2 +#define BV_CLKCTRL_PLL0CTRL0_CP_SEL__UNDEFINED 0x3 +#define BP_CLKCTRL_PLL0CTRL0_RSRVD4 22 +#define BM_CLKCTRL_PLL0CTRL0_RSRVD4 0x00C00000 +#define BF_CLKCTRL_PLL0CTRL0_RSRVD4(v) \ + (((v) << 22) & BM_CLKCTRL_PLL0CTRL0_RSRVD4) +#define BP_CLKCTRL_PLL0CTRL0_DIV_SEL 20 +#define BM_CLKCTRL_PLL0CTRL0_DIV_SEL 0x00300000 +#define BF_CLKCTRL_PLL0CTRL0_DIV_SEL(v) \ + (((v) << 20) & BM_CLKCTRL_PLL0CTRL0_DIV_SEL) +#define BV_CLKCTRL_PLL0CTRL0_DIV_SEL__DEFAULT 0x0 +#define BV_CLKCTRL_PLL0CTRL0_DIV_SEL__LOWER 0x1 +#define BV_CLKCTRL_PLL0CTRL0_DIV_SEL__LOWEST 0x2 +#define BV_CLKCTRL_PLL0CTRL0_DIV_SEL__UNDEFINED 0x3 +#define BM_CLKCTRL_PLL0CTRL0_RSRVD3 0x00080000 +#define BM_CLKCTRL_PLL0CTRL0_EN_USB_CLKS 0x00040000 +#define BM_CLKCTRL_PLL0CTRL0_POWER 0x00020000 +#define BP_CLKCTRL_PLL0CTRL0_RSRVD1 0 +#define BM_CLKCTRL_PLL0CTRL0_RSRVD1 0x0001FFFF +#define BF_CLKCTRL_PLL0CTRL0_RSRVD1(v) \ + (((v) << 0) & BM_CLKCTRL_PLL0CTRL0_RSRVD1) + +#define HW_CLKCTRL_PLL0CTRL1 (0x00000010) + +#define BM_CLKCTRL_PLL0CTRL1_LOCK 0x80000000 +#define BM_CLKCTRL_PLL0CTRL1_FORCE_LOCK 0x40000000 +#define BP_CLKCTRL_PLL0CTRL1_RSRVD1 16 +#define BM_CLKCTRL_PLL0CTRL1_RSRVD1 0x3FFF0000 +#define BF_CLKCTRL_PLL0CTRL1_RSRVD1(v) \ + (((v) << 16) & BM_CLKCTRL_PLL0CTRL1_RSRVD1) +#define BP_CLKCTRL_PLL0CTRL1_LOCK_COUNT 0 +#define BM_CLKCTRL_PLL0CTRL1_LOCK_COUNT 0x0000FFFF +#define BF_CLKCTRL_PLL0CTRL1_LOCK_COUNT(v) \ + (((v) << 0) & BM_CLKCTRL_PLL0CTRL1_LOCK_COUNT) + +#define HW_CLKCTRL_PLL1CTRL0 (0x00000020) +#define HW_CLKCTRL_PLL1CTRL0_SET (0x00000024) +#define HW_CLKCTRL_PLL1CTRL0_CLR (0x00000028) +#define HW_CLKCTRL_PLL1CTRL0_TOG (0x0000002c) + +#define BM_CLKCTRL_PLL1CTRL0_CLKGATEEMI 0x80000000 +#define BM_CLKCTRL_PLL1CTRL0_RSRVD6 0x40000000 +#define BP_CLKCTRL_PLL1CTRL0_LFR_SEL 28 +#define BM_CLKCTRL_PLL1CTRL0_LFR_SEL 0x30000000 +#define BF_CLKCTRL_PLL1CTRL0_LFR_SEL(v) \ + (((v) << 28) & BM_CLKCTRL_PLL1CTRL0_LFR_SEL) +#define BV_CLKCTRL_PLL1CTRL0_LFR_SEL__DEFAULT 0x0 +#define BV_CLKCTRL_PLL1CTRL0_LFR_SEL__TIMES_2 0x1 +#define BV_CLKCTRL_PLL1CTRL0_LFR_SEL__TIMES_05 0x2 +#define BV_CLKCTRL_PLL1CTRL0_LFR_SEL__UNDEFINED 0x3 +#define BP_CLKCTRL_PLL1CTRL0_RSRVD5 26 +#define BM_CLKCTRL_PLL1CTRL0_RSRVD5 0x0C000000 +#define BF_CLKCTRL_PLL1CTRL0_RSRVD5(v) \ + (((v) << 26) & BM_CLKCTRL_PLL1CTRL0_RSRVD5) +#define BP_CLKCTRL_PLL1CTRL0_CP_SEL 24 +#define BM_CLKCTRL_PLL1CTRL0_CP_SEL 0x03000000 +#define BF_CLKCTRL_PLL1CTRL0_CP_SEL(v) \ + (((v) << 24) & BM_CLKCTRL_PLL1CTRL0_CP_SEL) +#define BV_CLKCTRL_PLL1CTRL0_CP_SEL__DEFAULT 0x0 +#define BV_CLKCTRL_PLL1CTRL0_CP_SEL__TIMES_2 0x1 +#define BV_CLKCTRL_PLL1CTRL0_CP_SEL__TIMES_05 0x2 +#define BV_CLKCTRL_PLL1CTRL0_CP_SEL__UNDEFINED 0x3 +#define BP_CLKCTRL_PLL1CTRL0_RSRVD4 22 +#define BM_CLKCTRL_PLL1CTRL0_RSRVD4 0x00C00000 +#define BF_CLKCTRL_PLL1CTRL0_RSRVD4(v) \ + (((v) << 22) & BM_CLKCTRL_PLL1CTRL0_RSRVD4) +#define BP_CLKCTRL_PLL1CTRL0_DIV_SEL 20 +#define BM_CLKCTRL_PLL1CTRL0_DIV_SEL 0x00300000 +#define BF_CLKCTRL_PLL1CTRL0_DIV_SEL(v) \ + (((v) << 20) & BM_CLKCTRL_PLL1CTRL0_DIV_SEL) +#define BV_CLKCTRL_PLL1CTRL0_DIV_SEL__DEFAULT 0x0 +#define BV_CLKCTRL_PLL1CTRL0_DIV_SEL__LOWER 0x1 +#define BV_CLKCTRL_PLL1CTRL0_DIV_SEL__LOWEST 0x2 +#define BV_CLKCTRL_PLL1CTRL0_DIV_SEL__UNDEFINED 0x3 +#define BM_CLKCTRL_PLL1CTRL0_RSRVD3 0x00080000 +#define BM_CLKCTRL_PLL1CTRL0_EN_USB_CLKS 0x00040000 +#define BM_CLKCTRL_PLL1CTRL0_POWER 0x00020000 +#define BP_CLKCTRL_PLL1CTRL0_RSRVD1 0 +#define BM_CLKCTRL_PLL1CTRL0_RSRVD1 0x0001FFFF +#define BF_CLKCTRL_PLL1CTRL0_RSRVD1(v) \ + (((v) << 0) & BM_CLKCTRL_PLL1CTRL0_RSRVD1) + +#define HW_CLKCTRL_PLL1CTRL1 (0x00000030) + +#define BM_CLKCTRL_PLL1CTRL1_LOCK 0x80000000 +#define BM_CLKCTRL_PLL1CTRL1_FORCE_LOCK 0x40000000 +#define BP_CLKCTRL_PLL1CTRL1_RSRVD1 16 +#define BM_CLKCTRL_PLL1CTRL1_RSRVD1 0x3FFF0000 +#define BF_CLKCTRL_PLL1CTRL1_RSRVD1(v) \ + (((v) << 16) & BM_CLKCTRL_PLL1CTRL1_RSRVD1) +#define BP_CLKCTRL_PLL1CTRL1_LOCK_COUNT 0 +#define BM_CLKCTRL_PLL1CTRL1_LOCK_COUNT 0x0000FFFF +#define BF_CLKCTRL_PLL1CTRL1_LOCK_COUNT(v) \ + (((v) << 0) & BM_CLKCTRL_PLL1CTRL1_LOCK_COUNT) + +#define HW_CLKCTRL_PLL2CTRL0 (0x00000040) +#define HW_CLKCTRL_PLL2CTRL0_SET (0x00000044) +#define HW_CLKCTRL_PLL2CTRL0_CLR (0x00000048) +#define HW_CLKCTRL_PLL2CTRL0_TOG (0x0000004c) + +#define BM_CLKCTRL_PLL2CTRL0_CLKGATE 0x80000000 +#define BM_CLKCTRL_PLL2CTRL0_RSRVD3 0x40000000 +#define BP_CLKCTRL_PLL2CTRL0_LFR_SEL 28 +#define BM_CLKCTRL_PLL2CTRL0_LFR_SEL 0x30000000 +#define BF_CLKCTRL_PLL2CTRL0_LFR_SEL(v) \ + (((v) << 28) & BM_CLKCTRL_PLL2CTRL0_LFR_SEL) +#define BM_CLKCTRL_PLL2CTRL0_RSRVD2 0x08000000 +#define BM_CLKCTRL_PLL2CTRL0_HOLD_RING_OFF_B 0x04000000 +#define BP_CLKCTRL_PLL2CTRL0_CP_SEL 24 +#define BM_CLKCTRL_PLL2CTRL0_CP_SEL 0x03000000 +#define BF_CLKCTRL_PLL2CTRL0_CP_SEL(v) \ + (((v) << 24) & BM_CLKCTRL_PLL2CTRL0_CP_SEL) +#define BM_CLKCTRL_PLL2CTRL0_POWER 0x00800000 +#define BP_CLKCTRL_PLL2CTRL0_RSRVD1 0 +#define BM_CLKCTRL_PLL2CTRL0_RSRVD1 0x007FFFFF +#define BF_CLKCTRL_PLL2CTRL0_RSRVD1(v) \ + (((v) << 0) & BM_CLKCTRL_PLL2CTRL0_RSRVD1) + +#define HW_CLKCTRL_CPU (0x00000050) +#define HW_CLKCTRL_CPU_SET (0x00000054) +#define HW_CLKCTRL_CPU_CLR (0x00000058) +#define HW_CLKCTRL_CPU_TOG (0x0000005c) + +#define BP_CLKCTRL_CPU_RSRVD5 30 +#define BM_CLKCTRL_CPU_RSRVD5 0xC0000000 +#define BF_CLKCTRL_CPU_RSRVD5(v) \ + (((v) << 30) & BM_CLKCTRL_CPU_RSRVD5) +#define BM_CLKCTRL_CPU_BUSY_REF_XTAL 0x20000000 +#define BM_CLKCTRL_CPU_BUSY_REF_CPU 0x10000000 +#define BM_CLKCTRL_CPU_RSRVD4 0x08000000 +#define BM_CLKCTRL_CPU_DIV_XTAL_FRAC_EN 0x04000000 +#define BP_CLKCTRL_CPU_DIV_XTAL 16 +#define BM_CLKCTRL_CPU_DIV_XTAL 0x03FF0000 +#define BF_CLKCTRL_CPU_DIV_XTAL(v) \ + (((v) << 16) & BM_CLKCTRL_CPU_DIV_XTAL) +#define BP_CLKCTRL_CPU_RSRVD3 13 +#define BM_CLKCTRL_CPU_RSRVD3 0x0000E000 +#define BF_CLKCTRL_CPU_RSRVD3(v) \ + (((v) << 13) & BM_CLKCTRL_CPU_RSRVD3) +#define BM_CLKCTRL_CPU_INTERRUPT_WAIT 0x00001000 +#define BM_CLKCTRL_CPU_RSRVD2 0x00000800 +#define BM_CLKCTRL_CPU_DIV_CPU_FRAC_EN 0x00000400 +#define BP_CLKCTRL_CPU_RSRVD1 6 +#define BM_CLKCTRL_CPU_RSRVD1 0x000003C0 +#define BF_CLKCTRL_CPU_RSRVD1(v) \ + (((v) << 6) & BM_CLKCTRL_CPU_RSRVD1) +#define BP_CLKCTRL_CPU_DIV_CPU 0 +#define BM_CLKCTRL_CPU_DIV_CPU 0x0000003F +#define BF_CLKCTRL_CPU_DIV_CPU(v) \ + (((v) << 0) & BM_CLKCTRL_CPU_DIV_CPU) + +#define HW_CLKCTRL_HBUS (0x00000060) +#define HW_CLKCTRL_HBUS_SET (0x00000064) +#define HW_CLKCTRL_HBUS_CLR (0x00000068) +#define HW_CLKCTRL_HBUS_TOG (0x0000006c) + +#define BM_CLKCTRL_HBUS_ASM_BUSY 0x80000000 +#define BM_CLKCTRL_HBUS_DCP_AS_ENABLE 0x40000000 +#define BM_CLKCTRL_HBUS_PXP_AS_ENABLE 0x20000000 +#define BM_CLKCTRL_HBUS_RSRVD2 0x10000000 +#define BM_CLKCTRL_HBUS_ASM_EMIPORT_AS_ENABLE 0x08000000 +#define BM_CLKCTRL_HBUS_APBHDMA_AS_ENABLE 0x04000000 +#define BM_CLKCTRL_HBUS_APBXDMA_AS_ENABLE 0x02000000 +#define BM_CLKCTRL_HBUS_TRAFFIC_JAM_AS_ENABLE 0x01000000 +#define BM_CLKCTRL_HBUS_TRAFFIC_AS_ENABLE 0x00800000 +#define BM_CLKCTRL_HBUS_CPU_DATA_AS_ENABLE 0x00400000 +#define BM_CLKCTRL_HBUS_CPU_INSTR_AS_ENABLE 0x00200000 +#define BM_CLKCTRL_HBUS_ASM_ENABLE 0x00100000 +#define BM_CLKCTRL_HBUS_AUTO_CLEAR_DIV_ENABLE 0x00080000 +#define BP_CLKCTRL_HBUS_SLOW_DIV 16 +#define BM_CLKCTRL_HBUS_SLOW_DIV 0x00070000 +#define BF_CLKCTRL_HBUS_SLOW_DIV(v) \ + (((v) << 16) & BM_CLKCTRL_HBUS_SLOW_DIV) +#define BV_CLKCTRL_HBUS_SLOW_DIV__BY1 0x0 +#define BV_CLKCTRL_HBUS_SLOW_DIV__BY2 0x1 +#define BV_CLKCTRL_HBUS_SLOW_DIV__BY4 0x2 +#define BV_CLKCTRL_HBUS_SLOW_DIV__BY8 0x3 +#define BV_CLKCTRL_HBUS_SLOW_DIV__BY16 0x4 +#define BV_CLKCTRL_HBUS_SLOW_DIV__BY32 0x5 +#define BP_CLKCTRL_HBUS_RSRVD1 6 +#define BM_CLKCTRL_HBUS_RSRVD1 0x0000FFC0 +#define BF_CLKCTRL_HBUS_RSRVD1(v) \ + (((v) << 6) & BM_CLKCTRL_HBUS_RSRVD1) +#define BM_CLKCTRL_HBUS_DIV_FRAC_EN 0x00000020 +#define BP_CLKCTRL_HBUS_DIV 0 +#define BM_CLKCTRL_HBUS_DIV 0x0000001F +#define BF_CLKCTRL_HBUS_DIV(v) \ + (((v) << 0) & BM_CLKCTRL_HBUS_DIV) + +#define HW_CLKCTRL_XBUS (0x00000070) + +#define BM_CLKCTRL_XBUS_BUSY 0x80000000 +#define BP_CLKCTRL_XBUS_RSRVD1 12 +#define BM_CLKCTRL_XBUS_RSRVD1 0x7FFFF000 +#define BF_CLKCTRL_XBUS_RSRVD1(v) \ + (((v) << 12) & BM_CLKCTRL_XBUS_RSRVD1) +#define BM_CLKCTRL_XBUS_AUTO_CLEAR_DIV_ENABLE 0x00000800 +#define BM_CLKCTRL_XBUS_DIV_FRAC_EN 0x00000400 +#define BP_CLKCTRL_XBUS_DIV 0 +#define BM_CLKCTRL_XBUS_DIV 0x000003FF +#define BF_CLKCTRL_XBUS_DIV(v) \ + (((v) << 0) & BM_CLKCTRL_XBUS_DIV) + +#define HW_CLKCTRL_XTAL (0x00000080) +#define HW_CLKCTRL_XTAL_SET (0x00000084) +#define HW_CLKCTRL_XTAL_CLR (0x00000088) +#define HW_CLKCTRL_XTAL_TOG (0x0000008c) + +#define BP_CLKCTRL_XTAL_UART_CLK_GATE 31 +#define BM_CLKCTRL_XTAL_UART_CLK_GATE 0x80000000 +#define BM_CLKCTRL_XTAL_RSRVD3 0x40000000 +#define BP_CLKCTRL_XTAL_PWM_CLK24M_GATE 29 +#define BM_CLKCTRL_XTAL_PWM_CLK24M_GATE 0x20000000 +#define BP_CLKCTRL_XTAL_RSRVD2 27 +#define BM_CLKCTRL_XTAL_RSRVD2 0x18000000 +#define BF_CLKCTRL_XTAL_RSRVD2(v) \ + (((v) << 27) & BM_CLKCTRL_XTAL_RSRVD2) +#define BP_CLKCTRL_XTAL_TIMROT_CLK32K_GATE 26 +#define BM_CLKCTRL_XTAL_TIMROT_CLK32K_GATE 0x04000000 +#define BP_CLKCTRL_XTAL_RSRVD1 2 +#define BM_CLKCTRL_XTAL_RSRVD1 0x03FFFFFC +#define BF_CLKCTRL_XTAL_RSRVD1(v) \ + (((v) << 2) & BM_CLKCTRL_XTAL_RSRVD1) +#define BP_CLKCTRL_XTAL_DIV_UART 0 +#define BM_CLKCTRL_XTAL_DIV_UART 0x00000003 +#define BF_CLKCTRL_XTAL_DIV_UART(v) \ + (((v) << 0) & BM_CLKCTRL_XTAL_DIV_UART) + +#define HW_CLKCTRL_SSP0 (0x00000090) + +#define BP_CLKCTRL_SSP0_CLKGATE 31 +#define BM_CLKCTRL_SSP0_CLKGATE 0x80000000 +#define BM_CLKCTRL_SSP0_RSRVD2 0x40000000 +#define BM_CLKCTRL_SSP0_BUSY 0x20000000 +#define BP_CLKCTRL_SSP0_RSRVD1 10 +#define BM_CLKCTRL_SSP0_RSRVD1 0x1FFFFC00 +#define BF_CLKCTRL_SSP0_RSRVD1(v) \ + (((v) << 10) & BM_CLKCTRL_SSP0_RSRVD1) +#define BM_CLKCTRL_SSP0_DIV_FRAC_EN 0x00000200 +#define BP_CLKCTRL_SSP0_DIV 0 +#define BM_CLKCTRL_SSP0_DIV 0x000001FF +#define BF_CLKCTRL_SSP0_DIV(v) \ + (((v) << 0) & BM_CLKCTRL_SSP0_DIV) + +#define HW_CLKCTRL_SSP1 (0x000000a0) + +#define BP_CLKCTRL_SSP1_CLKGATE 31 +#define BM_CLKCTRL_SSP1_CLKGATE 0x80000000 +#define BM_CLKCTRL_SSP1_RSRVD2 0x40000000 +#define BM_CLKCTRL_SSP1_BUSY 0x20000000 +#define BP_CLKCTRL_SSP1_RSRVD1 10 +#define BM_CLKCTRL_SSP1_RSRVD1 0x1FFFFC00 +#define BF_CLKCTRL_SSP1_RSRVD1(v) \ + (((v) << 10) & BM_CLKCTRL_SSP1_RSRVD1) +#define BM_CLKCTRL_SSP1_DIV_FRAC_EN 0x00000200 +#define BP_CLKCTRL_SSP1_DIV 0 +#define BM_CLKCTRL_SSP1_DIV 0x000001FF +#define BF_CLKCTRL_SSP1_DIV(v) \ + (((v) << 0) & BM_CLKCTRL_SSP1_DIV) + +#define HW_CLKCTRL_SSP2 (0x000000b0) + +#define BP_CLKCTRL_SSP2_CLKGATE 31 +#define BM_CLKCTRL_SSP2_CLKGATE 0x80000000 +#define BM_CLKCTRL_SSP2_RSRVD2 0x40000000 +#define BM_CLKCTRL_SSP2_BUSY 0x20000000 +#define BP_CLKCTRL_SSP2_RSRVD1 10 +#define BM_CLKCTRL_SSP2_RSRVD1 0x1FFFFC00 +#define BF_CLKCTRL_SSP2_RSRVD1(v) \ + (((v) << 10) & BM_CLKCTRL_SSP2_RSRVD1) +#define BM_CLKCTRL_SSP2_DIV_FRAC_EN 0x00000200 +#define BP_CLKCTRL_SSP2_DIV 0 +#define BM_CLKCTRL_SSP2_DIV 0x000001FF +#define BF_CLKCTRL_SSP2_DIV(v) \ + (((v) << 0) & BM_CLKCTRL_SSP2_DIV) + +#define HW_CLKCTRL_SSP3 (0x000000c0) + +#define BP_CLKCTRL_SSP3_CLKGATE 31 +#define BM_CLKCTRL_SSP3_CLKGATE 0x80000000 +#define BM_CLKCTRL_SSP3_RSRVD2 0x40000000 +#define BM_CLKCTRL_SSP3_BUSY 0x20000000 +#define BP_CLKCTRL_SSP3_RSRVD1 10 +#define BM_CLKCTRL_SSP3_RSRVD1 0x1FFFFC00 +#define BF_CLKCTRL_SSP3_RSRVD1(v) \ + (((v) << 10) & BM_CLKCTRL_SSP3_RSRVD1) +#define BM_CLKCTRL_SSP3_DIV_FRAC_EN 0x00000200 +#define BP_CLKCTRL_SSP3_DIV 0 +#define BM_CLKCTRL_SSP3_DIV 0x000001FF +#define BF_CLKCTRL_SSP3_DIV(v) \ + (((v) << 0) & BM_CLKCTRL_SSP3_DIV) + +#define HW_CLKCTRL_GPMI (0x000000d0) + +#define BP_CLKCTRL_GPMI_CLKGATE 31 +#define BM_CLKCTRL_GPMI_CLKGATE 0x80000000 +#define BM_CLKCTRL_GPMI_RSRVD2 0x40000000 +#define BM_CLKCTRL_GPMI_BUSY 0x20000000 +#define BP_CLKCTRL_GPMI_RSRVD1 11 +#define BM_CLKCTRL_GPMI_RSRVD1 0x1FFFF800 +#define BF_CLKCTRL_GPMI_RSRVD1(v) \ + (((v) << 11) & BM_CLKCTRL_GPMI_RSRVD1) +#define BM_CLKCTRL_GPMI_DIV_FRAC_EN 0x00000400 +#define BP_CLKCTRL_GPMI_DIV 0 +#define BM_CLKCTRL_GPMI_DIV 0x000003FF +#define BF_CLKCTRL_GPMI_DIV(v) \ + (((v) << 0) & BM_CLKCTRL_GPMI_DIV) + +#define HW_CLKCTRL_SPDIF (0x000000e0) + +#define BP_CLKCTRL_SPDIF_CLKGATE 31 +#define BM_CLKCTRL_SPDIF_CLKGATE 0x80000000 +#define BP_CLKCTRL_SPDIF_RSRVD 0 +#define BM_CLKCTRL_SPDIF_RSRVD 0x7FFFFFFF +#define BF_CLKCTRL_SPDIF_RSRVD(v) \ + (((v) << 0) & BM_CLKCTRL_SPDIF_RSRVD) + +#define HW_CLKCTRL_EMI (0x000000f0) + +#define BP_CLKCTRL_EMI_CLKGATE 31 +#define BM_CLKCTRL_EMI_CLKGATE 0x80000000 +#define BM_CLKCTRL_EMI_SYNC_MODE_EN 0x40000000 +#define BM_CLKCTRL_EMI_BUSY_REF_XTAL 0x20000000 +#define BM_CLKCTRL_EMI_BUSY_REF_EMI 0x10000000 +#define BM_CLKCTRL_EMI_BUSY_REF_CPU 0x08000000 +#define BM_CLKCTRL_EMI_BUSY_SYNC_MODE 0x04000000 +#define BP_CLKCTRL_EMI_RSRVD3 18 +#define BM_CLKCTRL_EMI_RSRVD3 0x03FC0000 +#define BF_CLKCTRL_EMI_RSRVD3(v) \ + (((v) << 18) & BM_CLKCTRL_EMI_RSRVD3) +#define BM_CLKCTRL_EMI_BUSY_DCC_RESYNC 0x00020000 +#define BM_CLKCTRL_EMI_DCC_RESYNC_ENABLE 0x00010000 +#define BP_CLKCTRL_EMI_RSRVD2 12 +#define BM_CLKCTRL_EMI_RSRVD2 0x0000F000 +#define BF_CLKCTRL_EMI_RSRVD2(v) \ + (((v) << 12) & BM_CLKCTRL_EMI_RSRVD2) +#define BP_CLKCTRL_EMI_DIV_XTAL 8 +#define BM_CLKCTRL_EMI_DIV_XTAL 0x00000F00 +#define BF_CLKCTRL_EMI_DIV_XTAL(v) \ + (((v) << 8) & BM_CLKCTRL_EMI_DIV_XTAL) +#define BP_CLKCTRL_EMI_RSRVD1 6 +#define BM_CLKCTRL_EMI_RSRVD1 0x000000C0 +#define BF_CLKCTRL_EMI_RSRVD1(v) \ + (((v) << 6) & BM_CLKCTRL_EMI_RSRVD1) +#define BP_CLKCTRL_EMI_DIV_EMI 0 +#define BM_CLKCTRL_EMI_DIV_EMI 0x0000003F +#define BF_CLKCTRL_EMI_DIV_EMI(v) \ + (((v) << 0) & BM_CLKCTRL_EMI_DIV_EMI) + +#define HW_CLKCTRL_SAIF0 (0x00000100) + +#define BP_CLKCTRL_SAIF0_CLKGATE 31 +#define BM_CLKCTRL_SAIF0_CLKGATE 0x80000000 +#define BM_CLKCTRL_SAIF0_RSRVD2 0x40000000 +#define BM_CLKCTRL_SAIF0_BUSY 0x20000000 +#define BP_CLKCTRL_SAIF0_RSRVD1 17 +#define BM_CLKCTRL_SAIF0_RSRVD1 0x1FFE0000 +#define BF_CLKCTRL_SAIF0_RSRVD1(v) \ + (((v) << 17) & BM_CLKCTRL_SAIF0_RSRVD1) +#define BM_CLKCTRL_SAIF0_DIV_FRAC_EN 0x00010000 +#define BP_CLKCTRL_SAIF0_DIV 0 +#define BM_CLKCTRL_SAIF0_DIV 0x0000FFFF +#define BF_CLKCTRL_SAIF0_DIV(v) \ + (((v) << 0) & BM_CLKCTRL_SAIF0_DIV) + +#define HW_CLKCTRL_SAIF1 (0x00000110) + +#define BP_CLKCTRL_SAIF1_CLKGATE 31 +#define BM_CLKCTRL_SAIF1_CLKGATE 0x80000000 +#define BM_CLKCTRL_SAIF1_RSRVD2 0x40000000 +#define BM_CLKCTRL_SAIF1_BUSY 0x20000000 +#define BP_CLKCTRL_SAIF1_RSRVD1 17 +#define BM_CLKCTRL_SAIF1_RSRVD1 0x1FFE0000 +#define BF_CLKCTRL_SAIF1_RSRVD1(v) \ + (((v) << 17) & BM_CLKCTRL_SAIF1_RSRVD1) +#define BM_CLKCTRL_SAIF1_DIV_FRAC_EN 0x00010000 +#define BP_CLKCTRL_SAIF1_DIV 0 +#define BM_CLKCTRL_SAIF1_DIV 0x0000FFFF +#define BF_CLKCTRL_SAIF1_DIV(v) \ + (((v) << 0) & BM_CLKCTRL_SAIF1_DIV) + +#define HW_CLKCTRL_DIS_LCDIF (0x00000120) + +#define BP_CLKCTRL_DIS_LCDIF_CLKGATE 31 +#define BM_CLKCTRL_DIS_LCDIF_CLKGATE 0x80000000 +#define BM_CLKCTRL_DIS_LCDIF_RSRVD2 0x40000000 +#define BM_CLKCTRL_DIS_LCDIF_BUSY 0x20000000 +#define BP_CLKCTRL_DIS_LCDIF_RSRVD1 14 +#define BM_CLKCTRL_DIS_LCDIF_RSRVD1 0x1FFFC000 +#define BF_CLKCTRL_DIS_LCDIF_RSRVD1(v) \ + (((v) << 14) & BM_CLKCTRL_DIS_LCDIF_RSRVD1) +#define BM_CLKCTRL_DIS_LCDIF_DIV_FRAC_EN 0x00002000 +#define BP_CLKCTRL_DIS_LCDIF_DIV 0 +#define BM_CLKCTRL_DIS_LCDIF_DIV 0x00001FFF +#define BF_CLKCTRL_DIS_LCDIF_DIV(v) \ + (((v) << 0) & BM_CLKCTRL_DIS_LCDIF_DIV) + +#define HW_CLKCTRL_ETM (0x00000130) + +#define BM_CLKCTRL_ETM_CLKGATE 0x80000000 +#define BM_CLKCTRL_ETM_RSRVD2 0x40000000 +#define BM_CLKCTRL_ETM_BUSY 0x20000000 +#define BP_CLKCTRL_ETM_RSRVD1 8 +#define BM_CLKCTRL_ETM_RSRVD1 0x1FFFFF00 +#define BF_CLKCTRL_ETM_RSRVD1(v) \ + (((v) << 8) & BM_CLKCTRL_ETM_RSRVD1) +#define BM_CLKCTRL_ETM_DIV_FRAC_EN 0x00000080 +#define BP_CLKCTRL_ETM_DIV 0 +#define BM_CLKCTRL_ETM_DIV 0x0000007F +#define BF_CLKCTRL_ETM_DIV(v) \ + (((v) << 0) & BM_CLKCTRL_ETM_DIV) + +#define HW_CLKCTRL_ENET (0x00000140) + +#define BM_CLKCTRL_ENET_SLEEP 0x80000000 +#define BP_CLKCTRL_ENET_DISABLE 30 +#define BM_CLKCTRL_ENET_DISABLE 0x40000000 +#define BM_CLKCTRL_ENET_STATUS 0x20000000 +#define BM_CLKCTRL_ENET_RSRVD1 0x10000000 +#define BM_CLKCTRL_ENET_BUSY_TIME 0x08000000 +#define BP_CLKCTRL_ENET_DIV_TIME 21 +#define BM_CLKCTRL_ENET_DIV_TIME 0x07E00000 +#define BF_CLKCTRL_ENET_DIV_TIME(v) \ + (((v) << 21) & BM_CLKCTRL_ENET_DIV_TIME) +#define BM_CLKCTRL_ENET_BUSY 0x08000000 +#define BP_CLKCTRL_ENET_DIV 21 +#define BM_CLKCTRL_ENET_DIV 0x07E00000 +#define BF_CLKCTRL_ENET_DIV(v) \ + (((v) << 21) & BM_CLKCTRL_ENET_DIV) +#define BP_CLKCTRL_ENET_TIME_SEL 19 +#define BM_CLKCTRL_ENET_TIME_SEL 0x00180000 +#define BF_CLKCTRL_ENET_TIME_SEL(v) \ + (((v) << 19) & BM_CLKCTRL_ENET_TIME_SEL) +#define BV_CLKCTRL_ENET_TIME_SEL__XTAL 0x0 +#define BV_CLKCTRL_ENET_TIME_SEL__PLL 0x1 +#define BV_CLKCTRL_ENET_TIME_SEL__RMII_CLK 0x2 +#define BV_CLKCTRL_ENET_TIME_SEL__UNDEFINED 0x3 +#define BM_CLKCTRL_ENET_CLK_OUT_EN 0x00040000 +#define BM_CLKCTRL_ENET_RESET_BY_SW_CHIP 0x00020000 +#define BM_CLKCTRL_ENET_RESET_BY_SW 0x00010000 +#define BP_CLKCTRL_ENET_RSRVD0 0 +#define BM_CLKCTRL_ENET_RSRVD0 0x0000FFFF +#define BF_CLKCTRL_ENET_RSRVD0(v) \ + (((v) << 0) & BM_CLKCTRL_ENET_RSRVD0) + +#define HW_CLKCTRL_HSADC (0x00000150) + +#define BM_CLKCTRL_HSADC_RSRVD2 0x80000000 +#define BM_CLKCTRL_HSADC_RESETB 0x40000000 +#define BP_CLKCTRL_HSADC_FREQDIV 28 +#define BM_CLKCTRL_HSADC_FREQDIV 0x30000000 +#define BF_CLKCTRL_HSADC_FREQDIV(v) \ + (((v) << 28) & BM_CLKCTRL_HSADC_FREQDIV) +#define BP_CLKCTRL_HSADC_RSRVD1 0 +#define BM_CLKCTRL_HSADC_RSRVD1 0x0FFFFFFF +#define BF_CLKCTRL_HSADC_RSRVD1(v) \ + (((v) << 0) & BM_CLKCTRL_HSADC_RSRVD1) + +#define HW_CLKCTRL_FLEXCAN (0x00000160) + +#define BM_CLKCTRL_FLEXCAN_RSRVD2 0x80000000 +#define BP_CLKCTRL_FLEXCAN_STOP_CAN0 30 +#define BM_CLKCTRL_FLEXCAN_STOP_CAN0 0x40000000 +#define BM_CLKCTRL_FLEXCAN_CAN0_STATUS 0x20000000 +#define BP_CLKCTRL_FLEXCAN_STOP_CAN1 28 +#define BM_CLKCTRL_FLEXCAN_STOP_CAN1 0x10000000 +#define BM_CLKCTRL_FLEXCAN_CAN1_STATUS 0x08000000 +#define BP_CLKCTRL_FLEXCAN_RSRVD1 0 +#define BM_CLKCTRL_FLEXCAN_RSRVD1 0x07FFFFFF +#define BF_CLKCTRL_FLEXCAN_RSRVD1(v) \ + (((v) << 0) & BM_CLKCTRL_FLEXCAN_RSRVD1) + +#define HW_CLKCTRL_FRAC0 (0x000001b0) +#define HW_CLKCTRL_FRAC0_SET (0x000001b4) +#define HW_CLKCTRL_FRAC0_CLR (0x000001b8) +#define HW_CLKCTRL_FRAC0_TOG (0x000001bc) + +#define BP_CLKCTRL_FRAC0_CLKGATEIO0 31 +#define BM_CLKCTRL_FRAC0_CLKGATEIO0 0x80000000 +#define BM_CLKCTRL_FRAC0_IO0_STABLE 0x40000000 +#define BP_CLKCTRL_FRAC0_IO0FRAC 24 +#define BM_CLKCTRL_FRAC0_IO0FRAC 0x3F000000 +#define BF_CLKCTRL_FRAC0_IO0FRAC(v) \ + (((v) << 24) & BM_CLKCTRL_FRAC0_IO0FRAC) +#define BP_CLKCTRL_FRAC0_CLKGATEIO1 23 +#define BM_CLKCTRL_FRAC0_CLKGATEIO1 0x00800000 +#define BM_CLKCTRL_FRAC0_IO1_STABLE 0x00400000 +#define BP_CLKCTRL_FRAC0_IO1FRAC 16 +#define BM_CLKCTRL_FRAC0_IO1FRAC 0x003F0000 +#define BF_CLKCTRL_FRAC0_IO1FRAC(v) \ + (((v) << 16) & BM_CLKCTRL_FRAC0_IO1FRAC) +#define BP_CLKCTRL_FRAC0_CLKGATEEMI 15 +#define BM_CLKCTRL_FRAC0_CLKGATEEMI 0x00008000 +#define BM_CLKCTRL_FRAC0_EMI_STABLE 0x00004000 +#define BP_CLKCTRL_FRAC0_EMIFRAC 8 +#define BM_CLKCTRL_FRAC0_EMIFRAC 0x00003F00 +#define BF_CLKCTRL_FRAC0_EMIFRAC(v) \ + (((v) << 8) & BM_CLKCTRL_FRAC0_EMIFRAC) +#define BP_CLKCTRL_FRAC0_CLKGATECPU 7 +#define BM_CLKCTRL_FRAC0_CLKGATECPU 0x00000080 +#define BM_CLKCTRL_FRAC0_CPU_STABLE 0x00000040 +#define BP_CLKCTRL_FRAC0_CPUFRAC 0 +#define BM_CLKCTRL_FRAC0_CPUFRAC 0x0000003F +#define BF_CLKCTRL_FRAC0_CPUFRAC(v) \ + (((v) << 0) & BM_CLKCTRL_FRAC0_CPUFRAC) + +#define HW_CLKCTRL_FRAC1 (0x000001c0) +#define HW_CLKCTRL_FRAC1_SET (0x000001c4) +#define HW_CLKCTRL_FRAC1_CLR (0x000001c8) +#define HW_CLKCTRL_FRAC1_TOG (0x000001cc) + +#define BP_CLKCTRL_FRAC1_RSRVD2 24 +#define BM_CLKCTRL_FRAC1_RSRVD2 0xFF000000 +#define BF_CLKCTRL_FRAC1_RSRVD2(v) \ + (((v) << 24) & BM_CLKCTRL_FRAC1_RSRVD2) +#define BP_CLKCTRL_FRAC1_CLKGATEGPMI 23 +#define BM_CLKCTRL_FRAC1_CLKGATEGPMI 0x00800000 +#define BM_CLKCTRL_FRAC1_GPMI_STABLE 0x00400000 +#define BP_CLKCTRL_FRAC1_GPMIFRAC 16 +#define BM_CLKCTRL_FRAC1_GPMIFRAC 0x003F0000 +#define BF_CLKCTRL_FRAC1_GPMIFRAC(v) \ + (((v) << 16) & BM_CLKCTRL_FRAC1_GPMIFRAC) +#define BP_CLKCTRL_FRAC1_CLKGATEHSADC 15 +#define BM_CLKCTRL_FRAC1_CLKGATEHSADC 0x00008000 +#define BM_CLKCTRL_FRAC1_HSADC_STABLE 0x00004000 +#define BP_CLKCTRL_FRAC1_HSADCFRAC 8 +#define BM_CLKCTRL_FRAC1_HSADCFRAC 0x00003F00 +#define BF_CLKCTRL_FRAC1_HSADCFRAC(v) \ + (((v) << 8) & BM_CLKCTRL_FRAC1_HSADCFRAC) +#define BP_CLKCTRL_FRAC1_CLKGATEPIX 7 +#define BM_CLKCTRL_FRAC1_CLKGATEPIX 0x00000080 +#define BM_CLKCTRL_FRAC1_PIX_STABLE 0x00000040 +#define BP_CLKCTRL_FRAC1_PIXFRAC 0 +#define BM_CLKCTRL_FRAC1_PIXFRAC 0x0000003F +#define BF_CLKCTRL_FRAC1_PIXFRAC(v) \ + (((v) << 0) & BM_CLKCTRL_FRAC1_PIXFRAC) + +#define HW_CLKCTRL_CLKSEQ (0x000001d0) +#define HW_CLKCTRL_CLKSEQ_SET (0x000001d4) +#define HW_CLKCTRL_CLKSEQ_CLR (0x000001d8) +#define HW_CLKCTRL_CLKSEQ_TOG (0x000001dc) + +#define BP_CLKCTRL_CLKSEQ_RSRVD0 19 +#define BM_CLKCTRL_CLKSEQ_RSRVD0 0xFFF80000 +#define BF_CLKCTRL_CLKSEQ_RSRVD0(v) \ + (((v) << 19) & BM_CLKCTRL_CLKSEQ_RSRVD0) +#define BM_CLKCTRL_CLKSEQ_BYPASS_CPU 0x00040000 +#define BP_CLKCTRL_CLKSEQ_RSRVD1 15 +#define BM_CLKCTRL_CLKSEQ_RSRVD1 0x00038000 +#define BF_CLKCTRL_CLKSEQ_RSRVD1(v) \ + (((v) << 15) & BM_CLKCTRL_CLKSEQ_RSRVD1) +#define BM_CLKCTRL_CLKSEQ_BYPASS_DIS_LCDIF 0x00004000 +#define BV_CLKCTRL_CLKSEQ_BYPASS_DIS_LCDIF__BYPASS 0x1 +#define BV_CLKCTRL_CLKSEQ_BYPASS_DIS_LCDIF__PFD 0x0 +#define BP_CLKCTRL_CLKSEQ_RSRVD2 9 +#define BM_CLKCTRL_CLKSEQ_RSRVD2 0x00003E00 +#define BF_CLKCTRL_CLKSEQ_RSRVD2(v) \ + (((v) << 9) & BM_CLKCTRL_CLKSEQ_RSRVD2) +#define BM_CLKCTRL_CLKSEQ_BYPASS_ETM 0x00000100 +#define BM_CLKCTRL_CLKSEQ_BYPASS_EMI 0x00000080 +#define BM_CLKCTRL_CLKSEQ_BYPASS_SSP3 0x00000040 +#define BM_CLKCTRL_CLKSEQ_BYPASS_SSP2 0x00000020 +#define BM_CLKCTRL_CLKSEQ_BYPASS_SSP1 0x00000010 +#define BM_CLKCTRL_CLKSEQ_BYPASS_SSP0 0x00000008 +#define BM_CLKCTRL_CLKSEQ_BYPASS_GPMI 0x00000004 +#define BM_CLKCTRL_CLKSEQ_BYPASS_SAIF1 0x00000002 +#define BM_CLKCTRL_CLKSEQ_BYPASS_SAIF0 0x00000001 + +#define HW_CLKCTRL_RESET (0x000001e0) + +#define BP_CLKCTRL_RESET_RSRVD 6 +#define BM_CLKCTRL_RESET_RSRVD 0xFFFFFFC0 +#define BF_CLKCTRL_RESET_RSRVD(v) \ + (((v) << 6) & BM_CLKCTRL_RESET_RSRVD) +#define BM_CLKCTRL_RESET_WDOG_POR_DISABLE 0x00000020 +#define BM_CLKCTRL_RESET_EXTERNAL_RESET_ENABLE 0x00000010 +#define BM_CLKCTRL_RESET_THERMAL_RESET_ENABLE 0x00000008 +#define BM_CLKCTRL_RESET_THERMAL_RESET_DEFAULT 0x00000004 +#define BM_CLKCTRL_RESET_CHIP 0x00000002 +#define BM_CLKCTRL_RESET_DIG 0x00000001 + +#define HW_CLKCTRL_STATUS (0x000001f0) + +#define BP_CLKCTRL_STATUS_CPU_LIMIT 30 +#define BM_CLKCTRL_STATUS_CPU_LIMIT 0xC0000000 +#define BF_CLKCTRL_STATUS_CPU_LIMIT(v) \ + (((v) << 30) & BM_CLKCTRL_STATUS_CPU_LIMIT) +#define BP_CLKCTRL_STATUS_RSRVD 0 +#define BM_CLKCTRL_STATUS_RSRVD 0x3FFFFFFF +#define BF_CLKCTRL_STATUS_RSRVD(v) \ + (((v) << 0) & BM_CLKCTRL_STATUS_RSRVD) + +#define HW_CLKCTRL_VERSION (0x00000200) + +#define BP_CLKCTRL_VERSION_MAJOR 24 +#define BM_CLKCTRL_VERSION_MAJOR 0xFF000000 +#define BF_CLKCTRL_VERSION_MAJOR(v) \ + (((v) << 24) & BM_CLKCTRL_VERSION_MAJOR) +#define BP_CLKCTRL_VERSION_MINOR 16 +#define BM_CLKCTRL_VERSION_MINOR 0x00FF0000 +#define BF_CLKCTRL_VERSION_MINOR(v) \ + (((v) << 16) & BM_CLKCTRL_VERSION_MINOR) +#define BP_CLKCTRL_VERSION_STEP 0 +#define BM_CLKCTRL_VERSION_STEP 0x0000FFFF +#define BF_CLKCTRL_VERSION_STEP(v) \ + (((v) << 0) & BM_CLKCTRL_VERSION_STEP) + +#endif /* __REGS_CLKCTRL_MX28_H__ */ diff --git a/arch/arm/mach-mxs/system.c b/arch/arm/mach-mxs/system.c new file mode 100644 index 00000000000..9343d7edd4f --- /dev/null +++ b/arch/arm/mach-mxs/system.c @@ -0,0 +1,137 @@ +/* + * Copyright (C) 1999 ARM Limited + * Copyright (C) 2000 Deep Blue Solutions Ltd + * Copyright 2006-2007,2010 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2008 Juergen Beisert, kernel@pengutronix.de + * Copyright 2009 Ilya Yanok, Emcraft Systems Ltd, yanok@emcraft.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/kernel.h> +#include <linux/clk.h> +#include <linux/io.h> +#include <linux/err.h> +#include <linux/delay.h> +#include <linux/init.h> + +#include <asm/proc-fns.h> +#include <asm/system.h> + +#include <mach/mxs.h> +#include <mach/common.h> + +#define MX23_CLKCTRL_RESET_OFFSET 0x120 +#define MX28_CLKCTRL_RESET_OFFSET 0x1e0 +#define MXS_CLKCTRL_RESET_CHIP (1 << 1) + +#define MXS_MODULE_CLKGATE (1 << 30) +#define MXS_MODULE_SFTRST (1 << 31) + +static void __iomem *mxs_clkctrl_reset_addr; + +/* + * Reset the system. It is called by machine_restart(). + */ +void arch_reset(char mode, const char *cmd) +{ + /* reset the chip */ + __mxs_setl(MXS_CLKCTRL_RESET_CHIP, mxs_clkctrl_reset_addr); + + pr_err("Failed to assert the chip reset\n"); + + /* Delay to allow the serial port to show the message */ + mdelay(50); + + /* We'll take a jump through zero as a poor second */ + cpu_reset(0); +} + +static int __init mxs_arch_reset_init(void) +{ + struct clk *clk; + + mxs_clkctrl_reset_addr = MXS_IO_ADDRESS(MXS_CLKCTRL_BASE_ADDR) + + (cpu_is_mx23() ? MX23_CLKCTRL_RESET_OFFSET : + MX28_CLKCTRL_RESET_OFFSET); + + clk = clk_get_sys("rtc", NULL); + if (!IS_ERR(clk)) + clk_enable(clk); + + return 0; +} +core_initcall(mxs_arch_reset_init); + +/* + * Clear the bit and poll it cleared. This is usually called with + * a reset address and mask being either SFTRST(bit 31) or CLKGATE + * (bit 30). + */ +static int clear_poll_bit(void __iomem *addr, u32 mask) +{ + int timeout = 0x400; + + /* clear the bit */ + __mxs_clrl(mask, addr); + + /* + * SFTRST needs 3 GPMI clocks to settle, the reference manual + * recommends to wait 1us. + */ + udelay(1); + + /* poll the bit becoming clear */ + while ((__raw_readl(addr) & mask) && --timeout) + /* nothing */; + + return !timeout; +} + +int mxs_reset_block(void __iomem *reset_addr) +{ + int ret; + int timeout = 0x400; + + /* clear and poll SFTRST */ + ret = clear_poll_bit(reset_addr, MXS_MODULE_SFTRST); + if (unlikely(ret)) + goto error; + + /* clear CLKGATE */ + __mxs_clrl(MXS_MODULE_CLKGATE, reset_addr); + + /* set SFTRST to reset the block */ + __mxs_setl(MXS_MODULE_SFTRST, reset_addr); + udelay(1); + + /* poll CLKGATE becoming set */ + while ((!(__raw_readl(reset_addr) & MXS_MODULE_CLKGATE)) && --timeout) + /* nothing */; + if (unlikely(!timeout)) + goto error; + + /* clear and poll SFTRST */ + ret = clear_poll_bit(reset_addr, MXS_MODULE_SFTRST); + if (unlikely(ret)) + goto error; + + /* clear and poll CLKGATE */ + ret = clear_poll_bit(reset_addr, MXS_MODULE_CLKGATE); + if (unlikely(ret)) + goto error; + + return 0; + +error: + pr_err("%s(%p): module reset timeout\n", __func__, reset_addr); + return -ETIMEDOUT; +} diff --git a/arch/arm/mach-mxs/timer.c b/arch/arm/mach-mxs/timer.c new file mode 100644 index 00000000000..13647f30186 --- /dev/null +++ b/arch/arm/mach-mxs/timer.c @@ -0,0 +1,296 @@ +/* + * Copyright (C) 2000-2001 Deep Blue Solutions + * Copyright (C) 2002 Shane Nay (shane@minirl.com) + * Copyright (C) 2006-2007 Pavel Pisa (ppisa@pikron.com) + * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de) + * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ + +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/clockchips.h> +#include <linux/clk.h> + +#include <asm/mach/time.h> +#include <mach/mxs.h> +#include <mach/common.h> + +/* + * There are 2 versions of the timrot on Freescale MXS-based SoCs. + * The v1 on MX23 only gets 16 bits counter, while v2 on MX28 + * extends the counter to 32 bits. + * + * The implementation uses two timers, one for clock_event and + * another for clocksource. MX28 uses timrot 0 and 1, while MX23 + * uses 0 and 2. + */ + +#define MX23_TIMROT_VERSION_OFFSET 0x0a0 +#define MX28_TIMROT_VERSION_OFFSET 0x120 +#define BP_TIMROT_MAJOR_VERSION 24 +#define BV_TIMROT_VERSION_1 0x01 +#define BV_TIMROT_VERSION_2 0x02 +#define timrot_is_v1() (timrot_major_version == BV_TIMROT_VERSION_1) + +/* + * There are 4 registers for each timrotv2 instance, and 2 registers + * for each timrotv1. So address step 0x40 in macros below strides + * one instance of timrotv2 while two instances of timrotv1. + * + * As the result, HW_TIMROT_XXXn(1) defines the address of timrot1 + * on MX28 while timrot2 on MX23. + */ +/* common between v1 and v2 */ +#define HW_TIMROT_ROTCTRL 0x00 +#define HW_TIMROT_TIMCTRLn(n) (0x20 + (n) * 0x40) +/* v1 only */ +#define HW_TIMROT_TIMCOUNTn(n) (0x30 + (n) * 0x40) +/* v2 only */ +#define HW_TIMROT_RUNNING_COUNTn(n) (0x30 + (n) * 0x40) +#define HW_TIMROT_FIXED_COUNTn(n) (0x40 + (n) * 0x40) + +#define BM_TIMROT_TIMCTRLn_RELOAD (1 << 6) +#define BM_TIMROT_TIMCTRLn_UPDATE (1 << 7) +#define BM_TIMROT_TIMCTRLn_IRQ_EN (1 << 14) +#define BM_TIMROT_TIMCTRLn_IRQ (1 << 15) +#define BP_TIMROT_TIMCTRLn_SELECT 0 +#define BV_TIMROTv1_TIMCTRLn_SELECT__32KHZ_XTAL 0x8 +#define BV_TIMROTv2_TIMCTRLn_SELECT__32KHZ_XTAL 0xb + +static struct clock_event_device mxs_clockevent_device; +static enum clock_event_mode mxs_clockevent_mode = CLOCK_EVT_MODE_UNUSED; + +static void __iomem *mxs_timrot_base = MXS_IO_ADDRESS(MXS_TIMROT_BASE_ADDR); +static u32 timrot_major_version; + +static inline void timrot_irq_disable(void) +{ + __mxs_clrl(BM_TIMROT_TIMCTRLn_IRQ_EN, + mxs_timrot_base + HW_TIMROT_TIMCTRLn(0)); +} + +static inline void timrot_irq_enable(void) +{ + __mxs_setl(BM_TIMROT_TIMCTRLn_IRQ_EN, + mxs_timrot_base + HW_TIMROT_TIMCTRLn(0)); +} + +static void timrot_irq_acknowledge(void) +{ + __mxs_clrl(BM_TIMROT_TIMCTRLn_IRQ, + mxs_timrot_base + HW_TIMROT_TIMCTRLn(0)); +} + +static cycle_t timrotv1_get_cycles(struct clocksource *cs) +{ + return ~((__raw_readl(mxs_timrot_base + HW_TIMROT_TIMCOUNTn(1)) + & 0xffff0000) >> 16); +} + +static cycle_t timrotv2_get_cycles(struct clocksource *cs) +{ + return ~__raw_readl(mxs_timrot_base + HW_TIMROT_RUNNING_COUNTn(1)); +} + +static int timrotv1_set_next_event(unsigned long evt, + struct clock_event_device *dev) +{ + /* timrot decrements the count */ + __raw_writel(evt, mxs_timrot_base + HW_TIMROT_TIMCOUNTn(0)); + + return 0; +} + +static int timrotv2_set_next_event(unsigned long evt, + struct clock_event_device *dev) +{ + /* timrot decrements the count */ + __raw_writel(evt, mxs_timrot_base + HW_TIMROT_FIXED_COUNTn(0)); + + return 0; +} + +static irqreturn_t mxs_timer_interrupt(int irq, void *dev_id) +{ + struct clock_event_device *evt = dev_id; + + timrot_irq_acknowledge(); + evt->event_handler(evt); + + return IRQ_HANDLED; +} + +static struct irqaction mxs_timer_irq = { + .name = "MXS Timer Tick", + .dev_id = &mxs_clockevent_device, + .flags = IRQF_TIMER | IRQF_IRQPOLL, + .handler = mxs_timer_interrupt, +}; + +#ifdef DEBUG +static const char *clock_event_mode_label[] const = { + [CLOCK_EVT_MODE_PERIODIC] = "CLOCK_EVT_MODE_PERIODIC", + [CLOCK_EVT_MODE_ONESHOT] = "CLOCK_EVT_MODE_ONESHOT", + [CLOCK_EVT_MODE_SHUTDOWN] = "CLOCK_EVT_MODE_SHUTDOWN", + [CLOCK_EVT_MODE_UNUSED] = "CLOCK_EVT_MODE_UNUSED" +}; +#endif /* DEBUG */ + +static void mxs_set_mode(enum clock_event_mode mode, + struct clock_event_device *evt) +{ + /* Disable interrupt in timer module */ + timrot_irq_disable(); + + if (mode != mxs_clockevent_mode) { + /* Set event time into the furthest future */ + if (timrot_is_v1()) + __raw_writel(0xffff, + mxs_timrot_base + HW_TIMROT_TIMCOUNTn(1)); + else + __raw_writel(0xffffffff, + mxs_timrot_base + HW_TIMROT_FIXED_COUNTn(1)); + + /* Clear pending interrupt */ + timrot_irq_acknowledge(); + } + +#ifdef DEBUG + pr_info("%s: changing mode from %s to %s\n", __func__, + clock_event_mode_label[mxs_clockevent_mode], + clock_event_mode_label[mode]); +#endif /* DEBUG */ + + /* Remember timer mode */ + mxs_clockevent_mode = mode; + + switch (mode) { + case CLOCK_EVT_MODE_PERIODIC: + pr_err("%s: Periodic mode is not implemented\n", __func__); + break; + case CLOCK_EVT_MODE_ONESHOT: + timrot_irq_enable(); + break; + case CLOCK_EVT_MODE_SHUTDOWN: + case CLOCK_EVT_MODE_UNUSED: + case CLOCK_EVT_MODE_RESUME: + /* Left event sources disabled, no more interrupts appear */ + break; + } +} + +static struct clock_event_device mxs_clockevent_device = { + .name = "mxs_timrot", + .features = CLOCK_EVT_FEAT_ONESHOT, + .shift = 32, + .set_mode = mxs_set_mode, + .set_next_event = timrotv2_set_next_event, + .rating = 200, +}; + +static int __init mxs_clockevent_init(struct clk *timer_clk) +{ + unsigned int c = clk_get_rate(timer_clk); + + mxs_clockevent_device.mult = + div_sc(c, NSEC_PER_SEC, mxs_clockevent_device.shift); + mxs_clockevent_device.cpumask = cpumask_of(0); + if (timrot_is_v1()) { + mxs_clockevent_device.set_next_event = timrotv1_set_next_event; + mxs_clockevent_device.max_delta_ns = + clockevent_delta2ns(0xfffe, &mxs_clockevent_device); + mxs_clockevent_device.min_delta_ns = + clockevent_delta2ns(0xf, &mxs_clockevent_device); + } else { + mxs_clockevent_device.max_delta_ns = + clockevent_delta2ns(0xfffffffe, &mxs_clockevent_device); + mxs_clockevent_device.min_delta_ns = + clockevent_delta2ns(0xf, &mxs_clockevent_device); + } + + clockevents_register_device(&mxs_clockevent_device); + + return 0; +} + +static struct clocksource clocksource_mxs = { + .name = "mxs_timer", + .rating = 200, + .read = timrotv2_get_cycles, + .mask = CLOCKSOURCE_MASK(32), + .flags = CLOCK_SOURCE_IS_CONTINUOUS, +}; + +static int __init mxs_clocksource_init(struct clk *timer_clk) +{ + unsigned int c = clk_get_rate(timer_clk); + + if (timrot_is_v1()) { + clocksource_mxs.read = timrotv1_get_cycles; + clocksource_mxs.mask = CLOCKSOURCE_MASK(16); + } + + clocksource_register_hz(&clocksource_mxs, c); + + return 0; +} + +void __init mxs_timer_init(struct clk *timer_clk, int irq) +{ + clk_enable(timer_clk); + + /* + * Initialize timers to a known state + */ + mxs_reset_block(mxs_timrot_base + HW_TIMROT_ROTCTRL); + + /* get timrot version */ + timrot_major_version = __raw_readl(mxs_timrot_base + + (cpu_is_mx23() ? MX23_TIMROT_VERSION_OFFSET : + MX28_TIMROT_VERSION_OFFSET)); + timrot_major_version >>= BP_TIMROT_MAJOR_VERSION; + + /* one for clock_event */ + __raw_writel((timrot_is_v1() ? + BV_TIMROTv1_TIMCTRLn_SELECT__32KHZ_XTAL : + BV_TIMROTv2_TIMCTRLn_SELECT__32KHZ_XTAL) | + BM_TIMROT_TIMCTRLn_UPDATE | + BM_TIMROT_TIMCTRLn_IRQ_EN, + mxs_timrot_base + HW_TIMROT_TIMCTRLn(0)); + + /* another for clocksource */ + __raw_writel((timrot_is_v1() ? + BV_TIMROTv1_TIMCTRLn_SELECT__32KHZ_XTAL : + BV_TIMROTv2_TIMCTRLn_SELECT__32KHZ_XTAL) | + BM_TIMROT_TIMCTRLn_RELOAD, + mxs_timrot_base + HW_TIMROT_TIMCTRLn(1)); + + /* set clocksource timer fixed count to the maximum */ + if (timrot_is_v1()) + __raw_writel(0xffff, + mxs_timrot_base + HW_TIMROT_TIMCOUNTn(1)); + else + __raw_writel(0xffffffff, + mxs_timrot_base + HW_TIMROT_FIXED_COUNTn(1)); + + /* init and register the timer to the framework */ + mxs_clocksource_init(timer_clk); + mxs_clockevent_init(timer_clk); + + /* Make irqs happen */ + setup_irq(irq, &mxs_timer_irq); +} diff --git a/arch/arm/plat-mxc/Kconfig b/arch/arm/plat-mxc/Kconfig index 64e3a64520e..389f2179501 100644 --- a/arch/arm/plat-mxc/Kconfig +++ b/arch/arm/plat-mxc/Kconfig @@ -21,10 +21,6 @@ config ARCH_MX2 config ARCH_MX25 bool "MX25-based" - select CPU_ARM926T - select ARCH_MXC_IOMUX_V3 - select HAVE_FB_IMX - select ARCH_MXC_AUDMUX_V2 help This enables support for systems based on the Freescale i.MX25 family @@ -51,7 +47,6 @@ endchoice source "arch/arm/mach-imx/Kconfig" source "arch/arm/mach-mx3/Kconfig" -source "arch/arm/mach-mx25/Kconfig" source "arch/arm/mach-mxc91231/Kconfig" source "arch/arm/mach-mx5/Kconfig" @@ -68,12 +63,10 @@ config MXC_IRQ_PRIOR Say N here, unless you have a specialized requirement. config MXC_TZIC - bool "Enable TrustZone Interrupt Controller" - depends on ARCH_MX51 - help - This will be automatically selected for all processors - containing this interrupt controller. - Say N here only if you are really sure. + bool + +config MXC_AVIC + bool config MXC_PWM tristate "Enable PWM driver" diff --git a/arch/arm/plat-mxc/Makefile b/arch/arm/plat-mxc/Makefile index 37267095278..5fd20e96876 100644 --- a/arch/arm/plat-mxc/Makefile +++ b/arch/arm/plat-mxc/Makefile @@ -3,10 +3,11 @@ # # Common support -obj-y := irq.o clock.o gpio.o time.o devices.o cpu.o system.o +obj-y := clock.o gpio.o time.o devices.o cpu.o system.o irq-common.o -# MX51 uses the TZIC interrupt controller, older platforms use AVIC (irq.o) +# MX51 uses the TZIC interrupt controller, older platforms use AVIC obj-$(CONFIG_MXC_TZIC) += tzic.o +obj-$(CONFIG_MXC_AVIC) += avic.o obj-$(CONFIG_IMX_HAVE_IOMUX_V1) += iomux-v1.o obj-$(CONFIG_ARCH_MXC_IOMUX_V3) += iomux-v3.o diff --git a/arch/arm/plat-mxc/audmux-v2.c b/arch/arm/plat-mxc/audmux-v2.c index 0be1ac7f421..175e3647bb2 100644 --- a/arch/arm/plat-mxc/audmux-v2.c +++ b/arch/arm/plat-mxc/audmux-v2.c @@ -209,7 +209,7 @@ static int mxc_audmux_v2_init(void) audmux_base = MX35_IO_ADDRESS(MX35_AUDMUX_BASE_ADDR); } #endif -#if defined(CONFIG_ARCH_MX25) +#if defined(CONFIG_SOC_IMX25) if (cpu_is_mx25()) { audmux_clk = clk_get(NULL, "audmux"); if (IS_ERR(audmux_clk)) { @@ -220,7 +220,7 @@ static int mxc_audmux_v2_init(void) } audmux_base = MX25_IO_ADDRESS(MX25_AUDMUX_BASE_ADDR); } -#endif +#endif /* if defined(CONFIG_SOC_IMX25) */ audmux_debugfs_init(); return 0; diff --git a/arch/arm/plat-mxc/irq.c b/arch/arm/plat-mxc/avic.c index 7331f2ace5f..9a4e8a22dd0 100644 --- a/arch/arm/plat-mxc/irq.c +++ b/arch/arm/plat-mxc/avic.c @@ -24,6 +24,8 @@ #include <asm/mach/irq.h> #include <mach/hardware.h> +#include "irq-common.h" + #define AVIC_INTCNTL 0x00 /* int control reg */ #define AVIC_NIMASK 0x04 /* int mask reg */ #define AVIC_INTENNUM 0x08 /* int enable number reg */ @@ -46,9 +48,9 @@ void __iomem *avic_base; -int imx_irq_set_priority(unsigned char irq, unsigned char prio) -{ #ifdef CONFIG_MXC_IRQ_PRIOR +static int avic_irq_set_priority(unsigned char irq, unsigned char prio) +{ unsigned int temp; unsigned int mask = 0x0F << irq % 8 * 4; @@ -62,14 +64,11 @@ int imx_irq_set_priority(unsigned char irq, unsigned char prio) __raw_writel(temp, avic_base + AVIC_NIPRIORITY(irq / 8)); return 0; -#else - return -ENOSYS; -#endif } -EXPORT_SYMBOL(imx_irq_set_priority); +#endif #ifdef CONFIG_FIQ -int mxc_set_irq_fiq(unsigned int irq, unsigned int type) +static int avic_set_irq_fiq(unsigned int irq, unsigned int type) { unsigned int irqt; @@ -87,7 +86,6 @@ int mxc_set_irq_fiq(unsigned int irq, unsigned int type) return 0; } -EXPORT_SYMBOL(mxc_set_irq_fiq); #endif /* CONFIG_FIQ */ /* Disable interrupt number "irq" in the AVIC */ @@ -102,10 +100,18 @@ static void mxc_unmask_irq(unsigned int irq) __raw_writel(irq, avic_base + AVIC_INTENNUM); } -static struct irq_chip mxc_avic_chip = { - .ack = mxc_mask_irq, - .mask = mxc_mask_irq, - .unmask = mxc_unmask_irq, +static struct mxc_irq_chip mxc_avic_chip = { + .base = { + .ack = mxc_mask_irq, + .mask = mxc_mask_irq, + .unmask = mxc_unmask_irq, + }, +#ifdef CONFIG_MXC_IRQ_PRIOR + .set_priority = avic_irq_set_priority, +#endif +#ifdef CONFIG_FIQ + .set_irq_fiq = avic_set_irq_fiq, +#endif }; /* @@ -133,7 +139,7 @@ void __init mxc_init_irq(void __iomem *irqbase) __raw_writel(0, avic_base + AVIC_INTTYPEH); __raw_writel(0, avic_base + AVIC_INTTYPEL); for (i = 0; i < MXC_INTERNAL_IRQS; i++) { - set_irq_chip(i, &mxc_avic_chip); + set_irq_chip(i, &mxc_avic_chip.base); set_irq_handler(i, handle_level_irq); set_irq_flags(i, IRQF_VALID); } diff --git a/arch/arm/plat-mxc/cpufreq.c b/arch/arm/plat-mxc/cpufreq.c index 039538e6879..ce81481becf 100644 --- a/arch/arm/plat-mxc/cpufreq.c +++ b/arch/arm/plat-mxc/cpufreq.c @@ -144,7 +144,6 @@ static int __init mxc_cpufreq_init(struct cpufreq_policy *policy) imx_freq_table[i].frequency = CPUFREQ_TABLE_END; policy->cur = clk_get_rate(cpu_clk) / 1000; - policy->governor = CPUFREQ_DEFAULT_GOVERNOR; policy->min = policy->cpuinfo.min_freq = cpu_freq_khz_min; policy->max = policy->cpuinfo.max_freq = cpu_freq_khz_max; diff --git a/arch/arm/plat-mxc/devices.c b/arch/arm/plat-mxc/devices.c index 735776d8495..e9bcefe79a4 100644 --- a/arch/arm/plat-mxc/devices.c +++ b/arch/arm/plat-mxc/devices.c @@ -17,6 +17,7 @@ */ #include <linux/kernel.h> +#include <linux/slab.h> #include <linux/init.h> #include <linux/err.h> #include <linux/platform_device.h> @@ -36,9 +37,10 @@ int __init mxc_register_device(struct platform_device *pdev, void *data) return ret; } -struct platform_device *__init imx_add_platform_device(const char *name, int id, +struct platform_device *__init imx_add_platform_device_dmamask( + const char *name, int id, const struct resource *res, unsigned int num_resources, - const void *data, size_t size_data) + const void *data, size_t size_data, u64 dmamask) { int ret = -ENOMEM; struct platform_device *pdev; @@ -47,6 +49,23 @@ struct platform_device *__init imx_add_platform_device(const char *name, int id, if (!pdev) goto err; + if (dmamask) { + /* + * This memory isn't freed when the device is put, + * I don't have a nice idea for that though. Conceptually + * dma_mask in struct device should not be a pointer. + * See http://thread.gmane.org/gmane.linux.kernel.pci/9081 + */ + pdev->dev.dma_mask = + kmalloc(sizeof(*pdev->dev.dma_mask), GFP_KERNEL); + if (!pdev->dev.dma_mask) + /* ret is still -ENOMEM; */ + goto err; + + *pdev->dev.dma_mask = dmamask; + pdev->dev.coherent_dma_mask = dmamask; + } + if (res) { ret = platform_device_add_resources(pdev, res, num_resources); if (ret) diff --git a/arch/arm/plat-mxc/devices/Kconfig b/arch/arm/plat-mxc/devices/Kconfig index 9aa6f3ea901..2537166468a 100644 --- a/arch/arm/plat-mxc/devices/Kconfig +++ b/arch/arm/plat-mxc/devices/Kconfig @@ -1,29 +1,73 @@ -config IMX_HAVE_PLATFORM_ESDHC - bool - config IMX_HAVE_PLATFORM_FEC bool - default y if ARCH_MX25 || SOC_IMX27 || ARCH_MX35 || ARCH_MX51 + default y if ARCH_MX25 || SOC_IMX27 || SOC_IMX35 || SOC_IMX51 config IMX_HAVE_PLATFORM_FLEXCAN select HAVE_CAN_FLEXCAN if CAN bool +config IMX_HAVE_PLATFORM_FSL_USB2_UDC + bool + config IMX_HAVE_PLATFORM_GPIO_KEYS bool - default y if ARCH_MX51 + default y if SOC_IMX51 + +config IMX_HAVE_PLATFORM_IMX21_HCD + bool +config IMX_HAVE_PLATFORM_IMX2_WDT + bool + +config IMX_HAVE_PLATFORM_IMXDI_RTC + bool + +config IMX_HAVE_PLATFORM_IMX_FB + bool + select HAVE_FB_IMX + config IMX_HAVE_PLATFORM_IMX_I2C bool +config IMX_HAVE_PLATFORM_IMX_KEYPAD + bool + config IMX_HAVE_PLATFORM_IMX_SSI bool config IMX_HAVE_PLATFORM_IMX_UART bool +config IMX_HAVE_PLATFORM_IMX_UDC + bool + +config IMX_HAVE_PLATFORM_MX1_CAMERA + bool + +config IMX_HAVE_PLATFORM_MX2_CAMERA + bool + +config IMX_HAVE_PLATFORM_MXC_EHCI + bool + +config IMX_HAVE_PLATFORM_MXC_MMC + bool + config IMX_HAVE_PLATFORM_MXC_NAND bool +config IMX_HAVE_PLATFORM_MXC_PWM + bool + +config IMX_HAVE_PLATFORM_MXC_RNGA + bool + select ARCH_HAS_RNGA + +config IMX_HAVE_PLATFORM_MXC_W1 + bool + +config IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX + bool + config IMX_HAVE_PLATFORM_SPI_IMX bool diff --git a/arch/arm/plat-mxc/devices/Makefile b/arch/arm/plat-mxc/devices/Makefile index 45aefeb283b..75cd2ece905 100644 --- a/arch/arm/plat-mxc/devices/Makefile +++ b/arch/arm/plat-mxc/devices/Makefile @@ -1,10 +1,24 @@ -obj-$(CONFIG_IMX_HAVE_PLATFORM_ESDHC) += platform-esdhc.o obj-$(CONFIG_IMX_HAVE_PLATFORM_FEC) += platform-fec.o obj-$(CONFIG_IMX_HAVE_PLATFORM_FLEXCAN) += platform-flexcan.o +obj-$(CONFIG_IMX_HAVE_PLATFORM_FSL_USB2_UDC) += platform-fsl-usb2-udc.o obj-$(CONFIG_IMX_HAVE_PLATFORM_GPIO_KEYS) += platform-gpio_keys.o +obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX21_HCD) += platform-imx21-hcd.o +obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX2_WDT) += platform-imx2-wdt.o +obj-$(CONFIG_IMX_HAVE_PLATFORM_IMXDI_RTC) += platform-imxdi_rtc.o obj-y += platform-imx-dma.o +obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX_FB) += platform-imx-fb.o obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX_I2C) += platform-imx-i2c.o +obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX_KEYPAD) += platform-imx-keypad.o obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX_SSI) += platform-imx-ssi.o obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX_UART) += platform-imx-uart.o +obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX_UDC) += platform-imx_udc.o +obj-$(CONFIG_IMX_HAVE_PLATFORM_MX1_CAMERA) += platform-mx1-camera.o +obj-$(CONFIG_IMX_HAVE_PLATFORM_MX2_CAMERA) += platform-mx2-camera.o +obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_EHCI) += platform-mxc-ehci.o +obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_MMC) += platform-mxc-mmc.o obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_NAND) += platform-mxc_nand.o +obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_PWM) += platform-mxc_pwm.o +obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_RNGA) += platform-mxc_rnga.o +obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_W1) += platform-mxc_w1.o +obj-$(CONFIG_IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX) += platform-sdhci-esdhc-imx.o obj-$(CONFIG_IMX_HAVE_PLATFORM_SPI_IMX) += platform-spi_imx.o diff --git a/arch/arm/plat-mxc/devices/platform-esdhc.c b/arch/arm/plat-mxc/devices/platform-esdhc.c deleted file mode 100644 index 2605bfa0dfb..00000000000 --- a/arch/arm/plat-mxc/devices/platform-esdhc.c +++ /dev/null @@ -1,71 +0,0 @@ -/* - * Copyright (C) 2010 Pengutronix, Wolfram Sang <w.sang@pengutronix.de> - * - * This program is free software; you can redistribute it and/or modify it under - * the terms of the GNU General Public License version 2 as published by the - * Free Software Foundation. - */ - -#include <mach/hardware.h> -#include <mach/devices-common.h> -#include <mach/esdhc.h> - -#define imx_esdhc_imx_data_entry_single(soc, _id, hwid) \ - { \ - .id = _id, \ - .iobase = soc ## _ESDHC ## hwid ## _BASE_ADDR, \ - .irq = soc ## _INT_ESDHC ## hwid, \ - } - -#define imx_esdhc_imx_data_entry(soc, id, hwid) \ - [id] = imx_esdhc_imx_data_entry_single(soc, id, hwid) - -#ifdef CONFIG_ARCH_MX25 -const struct imx_esdhc_imx_data imx25_esdhc_data[] __initconst = { -#define imx25_esdhc_data_entry(_id, _hwid) \ - imx_esdhc_imx_data_entry(MX25, _id, _hwid) - imx25_esdhc_data_entry(0, 1), - imx25_esdhc_data_entry(1, 2), -}; -#endif /* ifdef CONFIG_ARCH_MX25 */ - -#ifdef CONFIG_ARCH_MX35 -const struct imx_esdhc_imx_data imx35_esdhc_data[] __initconst = { -#define imx35_esdhc_data_entry(_id, _hwid) \ - imx_esdhc_imx_data_entry(MX35, _id, _hwid) - imx35_esdhc_data_entry(0, 1), - imx35_esdhc_data_entry(1, 2), - imx35_esdhc_data_entry(2, 3), -}; -#endif /* ifdef CONFIG_ARCH_MX35 */ - -#ifdef CONFIG_ARCH_MX51 -const struct imx_esdhc_imx_data imx51_esdhc_data[] __initconst = { -#define imx51_esdhc_data_entry(_id, _hwid) \ - imx_esdhc_imx_data_entry(MX51, _id, _hwid) - imx51_esdhc_data_entry(0, 1), - imx51_esdhc_data_entry(1, 2), - imx51_esdhc_data_entry(2, 3), - imx51_esdhc_data_entry(3, 4), -}; -#endif /* ifdef CONFIG_ARCH_MX51 */ - -struct platform_device *__init imx_add_esdhc( - const struct imx_esdhc_imx_data *data, - const struct esdhc_platform_data *pdata) -{ - struct resource res[] = { - { - .start = data->iobase, - .end = data->iobase + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, { - .start = data->irq, - .end = data->irq, - .flags = IORESOURCE_IRQ, - }, - }; - - return imx_add_platform_device("sdhci-esdhc-imx", data->id, res, - ARRAY_SIZE(res), pdata, sizeof(*pdata)); -} diff --git a/arch/arm/plat-mxc/devices/platform-fec.c b/arch/arm/plat-mxc/devices/platform-fec.c index 11d087f4e21..269ec78aba7 100644 --- a/arch/arm/plat-mxc/devices/platform-fec.c +++ b/arch/arm/plat-mxc/devices/platform-fec.c @@ -16,22 +16,22 @@ .irq = soc ## _INT_FEC, \ } -#ifdef CONFIG_ARCH_MX25 +#ifdef CONFIG_SOC_IMX25 const struct imx_fec_data imx25_fec_data __initconst = imx_fec_data_entry_single(MX25); -#endif /* ifdef CONFIG_ARCH_MX25 */ +#endif /* ifdef CONFIG_SOC_IMX25 */ #ifdef CONFIG_SOC_IMX27 const struct imx_fec_data imx27_fec_data __initconst = imx_fec_data_entry_single(MX27); #endif /* ifdef CONFIG_SOC_IMX27 */ -#ifdef CONFIG_ARCH_MX35 +#ifdef CONFIG_SOC_IMX35 const struct imx_fec_data imx35_fec_data __initconst = imx_fec_data_entry_single(MX35); #endif -#ifdef CONFIG_ARCH_MX51 +#ifdef CONFIG_SOC_IMX51 const struct imx_fec_data imx51_fec_data __initconst = imx_fec_data_entry_single(MX51); #endif diff --git a/arch/arm/plat-mxc/devices/platform-flexcan.c b/arch/arm/plat-mxc/devices/platform-flexcan.c index 5e97a01f14f..4e8497af2eb 100644 --- a/arch/arm/plat-mxc/devices/platform-flexcan.c +++ b/arch/arm/plat-mxc/devices/platform-flexcan.c @@ -5,26 +5,54 @@ * the terms of the GNU General Public License version 2 as published by the * Free Software Foundation. */ - +#include <mach/hardware.h> #include <mach/devices-common.h> -struct platform_device *__init imx_add_flexcan(int id, - resource_size_t iobase, resource_size_t iosize, - resource_size_t irq, +#define imx_flexcan_data_entry_single(soc, _id, _hwid, _size) \ + { \ + .id = _id, \ + .iobase = soc ## _CAN ## _hwid ## _BASE_ADDR, \ + .iosize = _size, \ + .irq = soc ## _INT_CAN ## _hwid, \ + } + +#define imx_flexcan_data_entry(soc, _id, _hwid, _size) \ + [_id] = imx_flexcan_data_entry_single(soc, _id, _hwid, _size) + +#ifdef CONFIG_SOC_IMX25 +const struct imx_flexcan_data imx25_flexcan_data[] __initconst = { +#define imx25_flexcan_data_entry(_id, _hwid) \ + imx_flexcan_data_entry(MX25, _id, _hwid, SZ_16K) + imx25_flexcan_data_entry(0, 1), + imx25_flexcan_data_entry(1, 2), +}; +#endif /* ifdef CONFIG_SOC_IMX25 */ + +#ifdef CONFIG_SOC_IMX35 +const struct imx_flexcan_data imx35_flexcan_data[] __initconst = { +#define imx35_flexcan_data_entry(_id, _hwid) \ + imx_flexcan_data_entry(MX35, _id, _hwid, SZ_16K) + imx35_flexcan_data_entry(0, 1), + imx35_flexcan_data_entry(1, 2), +}; +#endif /* ifdef CONFIG_SOC_IMX35 */ + +struct platform_device *__init imx_add_flexcan( + const struct imx_flexcan_data *data, const struct flexcan_platform_data *pdata) { struct resource res[] = { { - .start = iobase, - .end = iobase + iosize - 1, + .start = data->iobase, + .end = data->iobase + data->iosize - 1, .flags = IORESOURCE_MEM, }, { - .start = irq, - .end = irq, + .start = data->irq, + .end = data->irq, .flags = IORESOURCE_IRQ, }, }; - return imx_add_platform_device("flexcan", id, res, ARRAY_SIZE(res), - pdata, sizeof(*pdata)); + return imx_add_platform_device("flexcan", data->id, + res, ARRAY_SIZE(res), pdata, sizeof(*pdata)); } diff --git a/arch/arm/plat-mxc/devices/platform-fsl-usb2-udc.c b/arch/arm/plat-mxc/devices/platform-fsl-usb2-udc.c new file mode 100644 index 00000000000..59c33f6e401 --- /dev/null +++ b/arch/arm/plat-mxc/devices/platform-fsl-usb2-udc.c @@ -0,0 +1,56 @@ +/* + * Copyright (C) 2010 Pengutronix + * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de> + * + * This program is free software; you can redistribute it and/or modify it under + * the terms of the GNU General Public License version 2 as published by the + * Free Software Foundation. + */ +#include <mach/hardware.h> +#include <mach/devices-common.h> + +#define imx_fsl_usb2_udc_data_entry_single(soc) \ + { \ + .iobase = soc ## _USB_OTG_BASE_ADDR, \ + .irq = soc ## _INT_USB_OTG, \ + } + +#ifdef CONFIG_SOC_IMX25 +const struct imx_fsl_usb2_udc_data imx25_fsl_usb2_udc_data __initconst = + imx_fsl_usb2_udc_data_entry_single(MX25); +#endif /* ifdef CONFIG_SOC_IMX25 */ + +#ifdef CONFIG_SOC_IMX27 +const struct imx_fsl_usb2_udc_data imx27_fsl_usb2_udc_data __initconst = + imx_fsl_usb2_udc_data_entry_single(MX27); +#endif /* ifdef CONFIG_SOC_IMX27 */ + +#ifdef CONFIG_SOC_IMX31 +const struct imx_fsl_usb2_udc_data imx31_fsl_usb2_udc_data __initconst = + imx_fsl_usb2_udc_data_entry_single(MX31); +#endif /* ifdef CONFIG_SOC_IMX31 */ + +#ifdef CONFIG_SOC_IMX35 +const struct imx_fsl_usb2_udc_data imx35_fsl_usb2_udc_data __initconst = + imx_fsl_usb2_udc_data_entry_single(MX35); +#endif /* ifdef CONFIG_SOC_IMX35 */ + +struct platform_device *__init imx_add_fsl_usb2_udc( + const struct imx_fsl_usb2_udc_data *data, + const struct fsl_usb2_platform_data *pdata) +{ + struct resource res[] = { + { + .start = data->iobase, + .end = data->iobase + SZ_512 - 1, + .flags = IORESOURCE_MEM, + }, { + .start = data->irq, + .end = data->irq, + .flags = IORESOURCE_IRQ, + }, + }; + return imx_add_platform_device_dmamask("fsl-usb2-udc", -1, + res, ARRAY_SIZE(res), + pdata, sizeof(*pdata), DMA_BIT_MASK(32)); +} diff --git a/arch/arm/plat-mxc/devices/platform-imx-dma.c b/arch/arm/plat-mxc/devices/platform-imx-dma.c index 3a705c7877d..33530d2d5ed 100644 --- a/arch/arm/plat-mxc/devices/platform-imx-dma.c +++ b/arch/arm/plat-mxc/devices/platform-imx-dma.c @@ -31,25 +31,25 @@ struct imx_imx_sdma_data { }, \ } -#ifdef CONFIG_ARCH_MX25 -const struct imx_imx_sdma_data imx25_imx_sdma_data __initconst = +#ifdef CONFIG_SOC_IMX25 +struct imx_imx_sdma_data imx25_imx_sdma_data __initconst = imx_imx_sdma_data_entry_single(MX25, 1, "imx25", 0); -#endif /* ifdef CONFIG_ARCH_MX25 */ +#endif /* ifdef CONFIG_SOC_IMX25 */ -#ifdef CONFIG_ARCH_MX31 +#ifdef CONFIG_SOC_IMX31 struct imx_imx_sdma_data imx31_imx_sdma_data __initdata = imx_imx_sdma_data_entry_single(MX31, 1, "imx31", 0); -#endif /* ifdef CONFIG_ARCH_MX31 */ +#endif /* ifdef CONFIG_SOC_IMX31 */ -#ifdef CONFIG_ARCH_MX35 +#ifdef CONFIG_SOC_IMX35 struct imx_imx_sdma_data imx35_imx_sdma_data __initdata = imx_imx_sdma_data_entry_single(MX35, 2, "imx35", 0); -#endif /* ifdef CONFIG_ARCH_MX35 */ +#endif /* ifdef CONFIG_SOC_IMX35 */ -#ifdef CONFIG_ARCH_MX51 -const struct imx_imx_sdma_data imx51_imx_sdma_data __initconst = +#ifdef CONFIG_SOC_IMX51 +struct imx_imx_sdma_data imx51_imx_sdma_data __initconst = imx_imx_sdma_data_entry_single(MX51, 2, "imx51", 0); -#endif /* ifdef CONFIG_ARCH_MX51 */ +#endif /* ifdef CONFIG_SOC_IMX51 */ static struct platform_device __init __maybe_unused *imx_add_imx_sdma( const struct imx_imx_sdma_data *data) @@ -76,6 +76,83 @@ static struct platform_device __init __maybe_unused *imx_add_imx_dma(void) return imx_add_platform_device("imx-dma", -1, NULL, 0, NULL, 0); } +#ifdef CONFIG_ARCH_MX25 +static struct sdma_script_start_addrs addr_imx25_to1 = { + .ap_2_ap_addr = 729, + .uart_2_mcu_addr = 904, + .per_2_app_addr = 1255, + .mcu_2_app_addr = 834, + .uartsh_2_mcu_addr = 1120, + .per_2_shp_addr = 1329, + .mcu_2_shp_addr = 1048, + .ata_2_mcu_addr = 1560, + .mcu_2_ata_addr = 1479, + .app_2_per_addr = 1189, + .app_2_mcu_addr = 770, + .shp_2_per_addr = 1407, + .shp_2_mcu_addr = 979, +}; +#endif + +#ifdef CONFIG_ARCH_MX31 +static struct sdma_script_start_addrs addr_imx31_to1 = { + .per_2_per_addr = 1677, +}; + +static struct sdma_script_start_addrs addr_imx31_to2 = { + .ap_2_ap_addr = 423, + .ap_2_bp_addr = 829, + .bp_2_ap_addr = 1029, +}; +#endif + +#ifdef CONFIG_ARCH_MX35 +static struct sdma_script_start_addrs addr_imx35_to1 = { + .ap_2_ap_addr = 642, + .uart_2_mcu_addr = 817, + .mcu_2_app_addr = 747, + .uartsh_2_mcu_addr = 1183, + .per_2_shp_addr = 1033, + .mcu_2_shp_addr = 961, + .ata_2_mcu_addr = 1333, + .mcu_2_ata_addr = 1252, + .app_2_mcu_addr = 683, + .shp_2_per_addr = 1111, + .shp_2_mcu_addr = 892, +}; + +static struct sdma_script_start_addrs addr_imx35_to2 = { + .ap_2_ap_addr = 729, + .uart_2_mcu_addr = 904, + .per_2_app_addr = 1597, + .mcu_2_app_addr = 834, + .uartsh_2_mcu_addr = 1270, + .per_2_shp_addr = 1120, + .mcu_2_shp_addr = 1048, + .ata_2_mcu_addr = 1429, + .mcu_2_ata_addr = 1339, + .app_2_per_addr = 1531, + .app_2_mcu_addr = 770, + .shp_2_per_addr = 1198, + .shp_2_mcu_addr = 979, +}; +#endif + +#ifdef CONFIG_SOC_IMX51 +static struct sdma_script_start_addrs addr_imx51_to1 = { + .ap_2_ap_addr = 642, + .uart_2_mcu_addr = 817, + .mcu_2_app_addr = 747, + .mcu_2_shp_addr = 961, + .ata_2_mcu_addr = 1473, + .mcu_2_ata_addr = 1392, + .app_2_per_addr = 1033, + .app_2_mcu_addr = 683, + .shp_2_per_addr = 1251, + .shp_2_mcu_addr = 892, +}; +#endif + static int __init imxXX_add_imx_dma(void) { struct platform_device *ret; @@ -86,30 +163,42 @@ static int __init imxXX_add_imx_dma(void) else #endif -#if defined(CONFIG_ARCH_MX25) - if (cpu_is_mx25()) +#if defined(CONFIG_SOC_IMX25) + if (cpu_is_mx25()) { + imx25_imx_sdma_data.pdata.script_addrs = &addr_imx25_to1; ret = imx_add_imx_sdma(&imx25_imx_sdma_data); - else + } else #endif -#if defined(CONFIG_ARCH_MX31) +#if defined(CONFIG_SOC_IMX31) if (cpu_is_mx31()) { - imx31_imx_sdma_data.pdata.to_version = mx31_revision() >> 4; + int to_version = mx31_revision() >> 4; + imx31_imx_sdma_data.pdata.to_version = to_version; + if (to_version == 1) + imx31_imx_sdma_data.pdata.script_addrs = &addr_imx31_to1; + else + imx31_imx_sdma_data.pdata.script_addrs = &addr_imx31_to2; ret = imx_add_imx_sdma(&imx31_imx_sdma_data); } else #endif -#if defined(CONFIG_ARCH_MX35) +#if defined(CONFIG_SOC_IMX35) if (cpu_is_mx35()) { - imx35_imx_sdma_data.pdata.to_version = mx35_revision() >> 4; + int to_version = mx35_revision() >> 4; + imx35_imx_sdma_data.pdata.to_version = to_version; + if (to_version == 1) + imx35_imx_sdma_data.pdata.script_addrs = &addr_imx35_to1; + else + imx35_imx_sdma_data.pdata.script_addrs = &addr_imx35_to2; ret = imx_add_imx_sdma(&imx35_imx_sdma_data); } else #endif #if defined(CONFIG_ARCH_MX51) - if (cpu_is_mx51()) + if (cpu_is_mx51()) { + imx51_imx_sdma_data.pdata.script_addrs = &addr_imx51_to1; ret = imx_add_imx_sdma(&imx51_imx_sdma_data); - else + } else #endif ret = ERR_PTR(-ENODEV); diff --git a/arch/arm/plat-mxc/devices/platform-imx-fb.c b/arch/arm/plat-mxc/devices/platform-imx-fb.c new file mode 100644 index 00000000000..6100a7d824d --- /dev/null +++ b/arch/arm/plat-mxc/devices/platform-imx-fb.c @@ -0,0 +1,52 @@ +/* + * Copyright (C) 2010 Pengutronix + * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de> + * + * This program is free software; you can redistribute it and/or modify it under + * the terms of the GNU General Public License version 2 as published by the + * Free Software Foundation. + */ +#include <mach/hardware.h> +#include <mach/devices-common.h> + +#define imx_imx_fb_data_entry_single(soc, _size) \ + { \ + .iobase = soc ## _LCDC_BASE_ADDR, \ + .iosize = _size, \ + .irq = soc ## _INT_LCDC, \ + } + +#ifdef CONFIG_SOC_IMX21 +const struct imx_imx_fb_data imx21_imx_fb_data __initconst = + imx_imx_fb_data_entry_single(MX21, SZ_4K); +#endif /* ifdef CONFIG_SOC_IMX21 */ + +#ifdef CONFIG_SOC_IMX25 +const struct imx_imx_fb_data imx25_imx_fb_data __initconst = + imx_imx_fb_data_entry_single(MX25, SZ_16K); +#endif /* ifdef CONFIG_SOC_IMX25 */ + +#ifdef CONFIG_SOC_IMX27 +const struct imx_imx_fb_data imx27_imx_fb_data __initconst = + imx_imx_fb_data_entry_single(MX27, SZ_4K); +#endif /* ifdef CONFIG_SOC_IMX27 */ + +struct platform_device *__init imx_add_imx_fb( + const struct imx_imx_fb_data *data, + const struct imx_fb_platform_data *pdata) +{ + struct resource res[] = { + { + .start = data->iobase, + .end = data->iobase + data->iosize - 1, + .flags = IORESOURCE_MEM, + }, { + .start = data->irq, + .end = data->irq, + .flags = IORESOURCE_IRQ, + }, + }; + return imx_add_platform_device_dmamask("imx-fb", 0, + res, ARRAY_SIZE(res), + pdata, sizeof(*pdata), DMA_BIT_MASK(32)); +} diff --git a/arch/arm/plat-mxc/devices/platform-imx-i2c.c b/arch/arm/plat-mxc/devices/platform-imx-i2c.c index 679588453aa..72ba880c75a 100644 --- a/arch/arm/plat-mxc/devices/platform-imx-i2c.c +++ b/arch/arm/plat-mxc/devices/platform-imx-i2c.c @@ -30,7 +30,7 @@ const struct imx_imx_i2c_data imx21_imx_i2c_data __initconst = imx_imx_i2c_data_entry_single(MX21, 0, , SZ_4K); #endif /* ifdef CONFIG_SOC_IMX21 */ -#ifdef CONFIG_ARCH_MX25 +#ifdef CONFIG_SOC_IMX25 const struct imx_imx_i2c_data imx25_imx_i2c_data[] __initconst = { #define imx25_imx_i2c_data_entry(_id, _hwid) \ imx_imx_i2c_data_entry(MX25, _id, _hwid, SZ_16K) @@ -38,7 +38,7 @@ const struct imx_imx_i2c_data imx25_imx_i2c_data[] __initconst = { imx25_imx_i2c_data_entry(1, 2), imx25_imx_i2c_data_entry(2, 3), }; -#endif /* ifdef CONFIG_ARCH_MX25 */ +#endif /* ifdef CONFIG_SOC_IMX25 */ #ifdef CONFIG_SOC_IMX27 const struct imx_imx_i2c_data imx27_imx_i2c_data[] __initconst = { @@ -49,7 +49,7 @@ const struct imx_imx_i2c_data imx27_imx_i2c_data[] __initconst = { }; #endif /* ifdef CONFIG_SOC_IMX27 */ -#ifdef CONFIG_ARCH_MX31 +#ifdef CONFIG_SOC_IMX31 const struct imx_imx_i2c_data imx31_imx_i2c_data[] __initconst = { #define imx31_imx_i2c_data_entry(_id, _hwid) \ imx_imx_i2c_data_entry(MX31, _id, _hwid, SZ_4K) @@ -57,9 +57,9 @@ const struct imx_imx_i2c_data imx31_imx_i2c_data[] __initconst = { imx31_imx_i2c_data_entry(1, 2), imx31_imx_i2c_data_entry(2, 3), }; -#endif /* ifdef CONFIG_ARCH_MX31 */ +#endif /* ifdef CONFIG_SOC_IMX31 */ -#ifdef CONFIG_ARCH_MX35 +#ifdef CONFIG_SOC_IMX35 const struct imx_imx_i2c_data imx35_imx_i2c_data[] __initconst = { #define imx35_imx_i2c_data_entry(_id, _hwid) \ imx_imx_i2c_data_entry(MX35, _id, _hwid, SZ_4K) @@ -67,16 +67,16 @@ const struct imx_imx_i2c_data imx35_imx_i2c_data[] __initconst = { imx35_imx_i2c_data_entry(1, 2), imx35_imx_i2c_data_entry(2, 3), }; -#endif /* ifdef CONFIG_ARCH_MX35 */ +#endif /* ifdef CONFIG_SOC_IMX35 */ -#ifdef CONFIG_ARCH_MX51 +#ifdef CONFIG_SOC_IMX51 const struct imx_imx_i2c_data imx51_imx_i2c_data[] __initconst = { #define imx51_imx_i2c_data_entry(_id, _hwid) \ imx_imx_i2c_data_entry(MX51, _id, _hwid, SZ_4K) imx51_imx_i2c_data_entry(0, 1), imx51_imx_i2c_data_entry(1, 2), }; -#endif /* ifdef CONFIG_ARCH_MX51 */ +#endif /* ifdef CONFIG_SOC_IMX51 */ struct platform_device *__init imx_add_imx_i2c( const struct imx_imx_i2c_data *data, diff --git a/arch/arm/plat-mxc/devices/platform-imx-keypad.c b/arch/arm/plat-mxc/devices/platform-imx-keypad.c new file mode 100644 index 00000000000..40238f0b864 --- /dev/null +++ b/arch/arm/plat-mxc/devices/platform-imx-keypad.c @@ -0,0 +1,62 @@ +/* + * Copyright (C) 2010 Pengutronix + * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de> + * + * This program is free software; you can redistribute it and/or modify it under + * the terms of the GNU General Public License version 2 as published by the + * Free Software Foundation. + */ +#include <mach/hardware.h> +#include <mach/devices-common.h> + +#define imx_imx_keypad_data_entry_single(soc, _size) \ + { \ + .iobase = soc ## _KPP_BASE_ADDR, \ + .iosize = _size, \ + .irq = soc ## _INT_KPP, \ + } + +#ifdef CONFIG_SOC_IMX21 +const struct imx_imx_keypad_data imx21_imx_keypad_data __initconst = + imx_imx_keypad_data_entry_single(MX21, SZ_16); +#endif /* ifdef CONFIG_SOC_IMX21 */ + +#ifdef CONFIG_SOC_IMX25 +const struct imx_imx_keypad_data imx25_imx_keypad_data __initconst = + imx_imx_keypad_data_entry_single(MX25, SZ_16K); +#endif /* ifdef CONFIG_SOC_IMX25 */ + +#ifdef CONFIG_SOC_IMX27 +const struct imx_imx_keypad_data imx27_imx_keypad_data __initconst = + imx_imx_keypad_data_entry_single(MX27, SZ_16); +#endif /* ifdef CONFIG_SOC_IMX27 */ + +#ifdef CONFIG_SOC_IMX31 +const struct imx_imx_keypad_data imx31_imx_keypad_data __initconst = + imx_imx_keypad_data_entry_single(MX31, SZ_16); +#endif /* ifdef CONFIG_SOC_IMX31 */ + +#ifdef CONFIG_SOC_IMX35 +const struct imx_imx_keypad_data imx35_imx_keypad_data __initconst = + imx_imx_keypad_data_entry_single(MX35, SZ_16); +#endif /* ifdef CONFIG_SOC_IMX35 */ + +struct platform_device *__init imx_add_imx_keypad( + const struct imx_imx_keypad_data *data, + const struct matrix_keymap_data *pdata) +{ + struct resource res[] = { + { + .start = data->iobase, + .end = data->iobase + data->iosize - 1, + .flags = IORESOURCE_MEM, + }, { + .start = data->irq, + .end = data->irq, + .flags = IORESOURCE_IRQ, + }, + }; + + return imx_add_platform_device("imx-keypad", -1, + res, ARRAY_SIZE(res), pdata, sizeof(*pdata)); +} diff --git a/arch/arm/plat-mxc/devices/platform-imx-ssi.c b/arch/arm/plat-mxc/devices/platform-imx-ssi.c index 38a7a0b8f2f..2569c8d8a2e 100644 --- a/arch/arm/plat-mxc/devices/platform-imx-ssi.c +++ b/arch/arm/plat-mxc/devices/platform-imx-ssi.c @@ -30,14 +30,14 @@ const struct imx_imx_ssi_data imx21_imx_ssi_data[] __initconst = { }; #endif /* ifdef CONFIG_SOC_IMX21 */ -#ifdef CONFIG_ARCH_MX25 +#ifdef CONFIG_SOC_IMX25 const struct imx_imx_ssi_data imx25_imx_ssi_data[] __initconst = { #define imx25_imx_ssi_data_entry(_id, _hwid) \ imx_imx_ssi_data_entry(MX25, _id, _hwid, SZ_4K) imx25_imx_ssi_data_entry(0, 1), imx25_imx_ssi_data_entry(1, 2), }; -#endif /* ifdef CONFIG_ARCH_MX25 */ +#endif /* ifdef CONFIG_SOC_IMX25 */ #ifdef CONFIG_SOC_IMX27 const struct imx_imx_ssi_data imx27_imx_ssi_data[] __initconst = { @@ -48,32 +48,33 @@ const struct imx_imx_ssi_data imx27_imx_ssi_data[] __initconst = { }; #endif /* ifdef CONFIG_SOC_IMX27 */ -#ifdef CONFIG_ARCH_MX31 +#ifdef CONFIG_SOC_IMX31 const struct imx_imx_ssi_data imx31_imx_ssi_data[] __initconst = { #define imx31_imx_ssi_data_entry(_id, _hwid) \ imx_imx_ssi_data_entry(MX31, _id, _hwid, SZ_4K) imx31_imx_ssi_data_entry(0, 1), imx31_imx_ssi_data_entry(1, 2), }; -#endif /* ifdef CONFIG_ARCH_MX31 */ +#endif /* ifdef CONFIG_SOC_IMX31 */ -#ifdef CONFIG_ARCH_MX35 +#ifdef CONFIG_SOC_IMX35 const struct imx_imx_ssi_data imx35_imx_ssi_data[] __initconst = { #define imx35_imx_ssi_data_entry(_id, _hwid) \ imx_imx_ssi_data_entry(MX35, _id, _hwid, SZ_4K) imx35_imx_ssi_data_entry(0, 1), imx35_imx_ssi_data_entry(1, 2), }; -#endif /* ifdef CONFIG_ARCH_MX35 */ +#endif /* ifdef CONFIG_SOC_IMX35 */ -#ifdef CONFIG_ARCH_MX51 +#ifdef CONFIG_SOC_IMX51 const struct imx_imx_ssi_data imx51_imx_ssi_data[] __initconst = { #define imx51_imx_ssi_data_entry(_id, _hwid) \ imx_imx_ssi_data_entry(MX51, _id, _hwid, SZ_4K) imx51_imx_ssi_data_entry(0, 1), imx51_imx_ssi_data_entry(1, 2), + imx51_imx_ssi_data_entry(2, 3), }; -#endif /* ifdef CONFIG_ARCH_MX51 */ +#endif /* ifdef CONFIG_SOC_IMX51 */ struct platform_device *__init imx_add_imx_ssi( const struct imx_imx_ssi_data *data, diff --git a/arch/arm/plat-mxc/devices/platform-imx-uart.c b/arch/arm/plat-mxc/devices/platform-imx-uart.c index 2039640adf2..3c854c2cc6d 100644 --- a/arch/arm/plat-mxc/devices/platform-imx-uart.c +++ b/arch/arm/plat-mxc/devices/platform-imx-uart.c @@ -47,7 +47,7 @@ const struct imx_imx_uart_1irq_data imx21_imx_uart_data[] __initconst = { }; #endif -#ifdef CONFIG_ARCH_MX25 +#ifdef CONFIG_SOC_IMX25 const struct imx_imx_uart_1irq_data imx25_imx_uart_data[] __initconst = { #define imx25_imx_uart_data_entry(_id, _hwid) \ imx_imx_uart_1irq_data_entry(MX25, _id, _hwid, SZ_16K) @@ -57,7 +57,7 @@ const struct imx_imx_uart_1irq_data imx25_imx_uart_data[] __initconst = { imx25_imx_uart_data_entry(3, 4), imx25_imx_uart_data_entry(4, 5), }; -#endif /* ifdef CONFIG_ARCH_MX25 */ +#endif /* ifdef CONFIG_SOC_IMX25 */ #ifdef CONFIG_SOC_IMX27 const struct imx_imx_uart_1irq_data imx27_imx_uart_data[] __initconst = { @@ -72,7 +72,7 @@ const struct imx_imx_uart_1irq_data imx27_imx_uart_data[] __initconst = { }; #endif /* ifdef CONFIG_SOC_IMX27 */ -#ifdef CONFIG_ARCH_MX31 +#ifdef CONFIG_SOC_IMX31 const struct imx_imx_uart_1irq_data imx31_imx_uart_data[] __initconst = { #define imx31_imx_uart_data_entry(_id, _hwid) \ imx_imx_uart_1irq_data_entry(MX31, _id, _hwid, SZ_4K) @@ -82,9 +82,9 @@ const struct imx_imx_uart_1irq_data imx31_imx_uart_data[] __initconst = { imx31_imx_uart_data_entry(3, 4), imx31_imx_uart_data_entry(4, 5), }; -#endif /* ifdef CONFIG_ARCH_MX31 */ +#endif /* ifdef CONFIG_SOC_IMX31 */ -#ifdef CONFIG_ARCH_MX35 +#ifdef CONFIG_SOC_IMX35 const struct imx_imx_uart_1irq_data imx35_imx_uart_data[] __initconst = { #define imx35_imx_uart_data_entry(_id, _hwid) \ imx_imx_uart_1irq_data_entry(MX31, _id, _hwid, SZ_16K) @@ -92,9 +92,21 @@ const struct imx_imx_uart_1irq_data imx35_imx_uart_data[] __initconst = { imx35_imx_uart_data_entry(1, 2), imx35_imx_uart_data_entry(2, 3), }; -#endif /* ifdef CONFIG_ARCH_MX35 */ +#endif /* ifdef CONFIG_SOC_IMX35 */ -#ifdef CONFIG_ARCH_MX51 +#ifdef CONFIG_SOC_IMX50 +const struct imx_imx_uart_1irq_data imx50_imx_uart_data[] __initconst = { +#define imx50_imx_uart_data_entry(_id, _hwid) \ + imx_imx_uart_1irq_data_entry(MX50, _id, _hwid, SZ_4K) + imx50_imx_uart_data_entry(0, 1), + imx50_imx_uart_data_entry(1, 2), + imx50_imx_uart_data_entry(2, 3), + imx50_imx_uart_data_entry(3, 4), + imx50_imx_uart_data_entry(4, 5), +}; +#endif /* ifdef CONFIG_SOC_IMX50 */ + +#ifdef CONFIG_SOC_IMX51 const struct imx_imx_uart_1irq_data imx51_imx_uart_data[] __initconst = { #define imx51_imx_uart_data_entry(_id, _hwid) \ imx_imx_uart_1irq_data_entry(MX51, _id, _hwid, SZ_4K) @@ -102,7 +114,17 @@ const struct imx_imx_uart_1irq_data imx51_imx_uart_data[] __initconst = { imx51_imx_uart_data_entry(1, 2), imx51_imx_uart_data_entry(2, 3), }; -#endif /* ifdef CONFIG_ARCH_MX51 */ +#endif /* ifdef CONFIG_SOC_IMX51 */ + +#ifdef CONFIG_SOC_IMX53 +const struct imx_imx_uart_1irq_data imx53_imx_uart_data[] __initconst = { +#define imx53_imx_uart_data_entry(_id, _hwid) \ + imx_imx_uart_1irq_data_entry(MX53, _id, _hwid, SZ_4K) + imx53_imx_uart_data_entry(0, 1), + imx53_imx_uart_data_entry(1, 2), + imx53_imx_uart_data_entry(2, 3), +}; +#endif /* ifdef CONFIG_SOC_IMX53 */ struct platform_device *__init imx_add_imx_uart_3irq( const struct imx_imx_uart_3irq_data *data, diff --git a/arch/arm/plat-mxc/devices/platform-imx2-wdt.c b/arch/arm/plat-mxc/devices/platform-imx2-wdt.c new file mode 100644 index 00000000000..e0aec61177f --- /dev/null +++ b/arch/arm/plat-mxc/devices/platform-imx2-wdt.c @@ -0,0 +1,68 @@ +/* + * Copyright (C) 2010 Pengutronix + * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de> + * + * This program is free software; you can redistribute it and/or modify it under + * the terms of the GNU General Public License version 2 as published by the + * Free Software Foundation. + */ +#include <asm/sizes.h> +#include <mach/hardware.h> +#include <mach/devices-common.h> + +#define imx_imx2_wdt_data_entry_single(soc, _id, _hwid, _size) \ + { \ + .id = _id, \ + .iobase = soc ## _WDOG ## _hwid ## _BASE_ADDR, \ + .iosize = _size, \ + } +#define imx_imx2_wdt_data_entry(soc, _id, _hwid, _size) \ + [_id] = imx_imx2_wdt_data_entry_single(soc, _id, _hwid, _size) + +#ifdef CONFIG_SOC_IMX21 +const struct imx_imx2_wdt_data imx21_imx2_wdt_data __initconst = + imx_imx2_wdt_data_entry_single(MX21, 0, , SZ_4K); +#endif /* ifdef CONFIG_SOC_IMX21 */ + +#ifdef CONFIG_SOC_IMX25 +const struct imx_imx2_wdt_data imx25_imx2_wdt_data __initconst = + imx_imx2_wdt_data_entry_single(MX25, 0, , SZ_16K); +#endif /* ifdef CONFIG_SOC_IMX25 */ + +#ifdef CONFIG_SOC_IMX27 +const struct imx_imx2_wdt_data imx27_imx2_wdt_data __initconst = + imx_imx2_wdt_data_entry_single(MX27, 0, , SZ_4K); +#endif /* ifdef CONFIG_SOC_IMX27 */ + +#ifdef CONFIG_SOC_IMX31 +const struct imx_imx2_wdt_data imx31_imx2_wdt_data __initconst = + imx_imx2_wdt_data_entry_single(MX31, 0, , SZ_16K); +#endif /* ifdef CONFIG_SOC_IMX31 */ + +#ifdef CONFIG_SOC_IMX35 +const struct imx_imx2_wdt_data imx35_imx2_wdt_data __initconst = + imx_imx2_wdt_data_entry_single(MX35, 0, , SZ_16K); +#endif /* ifdef CONFIG_SOC_IMX35 */ + +#ifdef CONFIG_SOC_IMX51 +const struct imx_imx2_wdt_data imx51_imx2_wdt_data[] __initconst = { +#define imx51_imx2_wdt_data_entry(_id, _hwid) \ + imx_imx2_wdt_data_entry(MX51, _id, _hwid, SZ_16K) + imx51_imx2_wdt_data_entry(0, 1), + imx51_imx2_wdt_data_entry(1, 2), +}; +#endif /* ifdef CONFIG_SOC_IMX51 */ + +struct platform_device *__init imx_add_imx2_wdt( + const struct imx_imx2_wdt_data *data) +{ + struct resource res[] = { + { + .start = data->iobase, + .end = data->iobase + data->iosize - 1, + .flags = IORESOURCE_MEM, + }, + }; + return imx_add_platform_device("imx2-wdt", data->id, + res, ARRAY_SIZE(res), NULL, 0); +} diff --git a/arch/arm/plat-mxc/devices/platform-imx21-hcd.c b/arch/arm/plat-mxc/devices/platform-imx21-hcd.c new file mode 100644 index 00000000000..5770a42f33b --- /dev/null +++ b/arch/arm/plat-mxc/devices/platform-imx21-hcd.c @@ -0,0 +1,41 @@ +/* + * Copyright (C) 2010 Pengutronix + * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de> + * + * This program is free software; you can redistribute it and/or modify it under + * the terms of the GNU General Public License version 2 as published by the + * Free Software Foundation. + */ +#include <mach/hardware.h> +#include <mach/devices-common.h> + +#define imx_imx21_hcd_data_entry_single(soc) \ + { \ + .iobase = soc ## _USBOTG_BASE_ADDR, \ + .irq = soc ## _INT_USBHOST, \ + } + +#ifdef CONFIG_SOC_IMX21 +const struct imx_imx21_hcd_data imx21_imx21_hcd_data __initconst = + imx_imx21_hcd_data_entry_single(MX21); +#endif /* ifdef CONFIG_SOC_IMX21 */ + +struct platform_device *__init imx_add_imx21_hcd( + const struct imx_imx21_hcd_data *data, + const struct mx21_usbh_platform_data *pdata) +{ + struct resource res[] = { + { + .start = data->iobase, + .end = data->iobase + SZ_8K - 1, + .flags = IORESOURCE_MEM, + }, { + .start = data->irq, + .end = data->irq, + .flags = IORESOURCE_IRQ, + }, + }; + return imx_add_platform_device_dmamask("imx21-hcd", 0, + res, ARRAY_SIZE(res), + pdata, sizeof(*pdata), DMA_BIT_MASK(32)); +} diff --git a/arch/arm/plat-mxc/devices/platform-imx_udc.c b/arch/arm/plat-mxc/devices/platform-imx_udc.c new file mode 100644 index 00000000000..6fd675dfce1 --- /dev/null +++ b/arch/arm/plat-mxc/devices/platform-imx_udc.c @@ -0,0 +1,75 @@ +/* + * Copyright (C) 2010 Pengutronix + * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de> + * + * This program is free software; you can redistribute it and/or modify it under + * the terms of the GNU General Public License version 2 as published by the + * Free Software Foundation. + */ +#include <mach/hardware.h> +#include <mach/devices-common.h> + +#define imx_imx_udc_data_entry_single(soc, _size) \ + { \ + .iobase = soc ## _USBD_BASE_ADDR, \ + .iosize = _size, \ + .irq0 = soc ## _INT_USBD0, \ + .irq1 = soc ## _INT_USBD1, \ + .irq2 = soc ## _INT_USBD2, \ + .irq3 = soc ## _INT_USBD3, \ + .irq4 = soc ## _INT_USBD4, \ + .irq5 = soc ## _INT_USBD5, \ + .irq6 = soc ## _INT_USBD6, \ + } + +#define imx_imx_udc_data_entry(soc, _size) \ + [_id] = imx_imx_udc_data_entry_single(soc, _size) + +#ifdef CONFIG_SOC_IMX1 +const struct imx_imx_udc_data imx1_imx_udc_data __initconst = + imx_imx_udc_data_entry_single(MX1, SZ_4K); +#endif /* ifdef CONFIG_SOC_IMX1 */ + +struct platform_device *__init imx_add_imx_udc( + const struct imx_imx_udc_data *data, + const struct imxusb_platform_data *pdata) +{ + struct resource res[] = { + { + .start = data->iobase, + .end = data->iobase + data->iosize - 1, + .flags = IORESOURCE_MEM, + }, { + .start = data->irq0, + .end = data->irq0, + .flags = IORESOURCE_IRQ, + }, { + .start = data->irq1, + .end = data->irq1, + .flags = IORESOURCE_IRQ, + }, { + .start = data->irq2, + .end = data->irq2, + .flags = IORESOURCE_IRQ, + }, { + .start = data->irq3, + .end = data->irq3, + .flags = IORESOURCE_IRQ, + }, { + .start = data->irq4, + .end = data->irq4, + .flags = IORESOURCE_IRQ, + }, { + .start = data->irq5, + .end = data->irq5, + .flags = IORESOURCE_IRQ, + }, { + .start = data->irq6, + .end = data->irq6, + .flags = IORESOURCE_IRQ, + }, + }; + + return imx_add_platform_device("imx_udc", 0, + res, ARRAY_SIZE(res), pdata, sizeof(*pdata)); +} diff --git a/arch/arm/plat-mxc/devices/platform-imxdi_rtc.c b/arch/arm/plat-mxc/devices/platform-imxdi_rtc.c new file mode 100644 index 00000000000..10653cc8d1f --- /dev/null +++ b/arch/arm/plat-mxc/devices/platform-imxdi_rtc.c @@ -0,0 +1,41 @@ +/* + * Copyright (C) 2010 Pengutronix + * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de> + * + * This program is free software; you can redistribute it and/or modify it under + * the terms of the GNU General Public License version 2 as published by the + * Free Software Foundation. + */ +#include <asm/sizes.h> +#include <mach/hardware.h> +#include <mach/devices-common.h> + +#define imx_imxdi_rtc_data_entry_single(soc) \ + { \ + .iobase = soc ## _DRYICE_BASE_ADDR, \ + .irq = soc ## _INT_DRYICE, \ + } + +#ifdef CONFIG_SOC_IMX25 +const struct imx_imxdi_rtc_data imx25_imxdi_rtc_data __initconst = + imx_imxdi_rtc_data_entry_single(MX25); +#endif /* ifdef CONFIG_SOC_IMX25 */ + +struct platform_device *__init imx_add_imxdi_rtc( + const struct imx_imxdi_rtc_data *data) +{ + struct resource res[] = { + { + .start = data->iobase, + .end = data->iobase + SZ_16K, + .flags = IORESOURCE_MEM, + }, { + .start = data->irq, + .end = data->irq, + .flags = IORESOURCE_IRQ, + }, + }; + + return imx_add_platform_device("imxdi_rtc", 0, + res, ARRAY_SIZE(res), NULL, 0); +} diff --git a/arch/arm/plat-mxc/devices/platform-mx1-camera.c b/arch/arm/plat-mxc/devices/platform-mx1-camera.c new file mode 100644 index 00000000000..edcc581a30a --- /dev/null +++ b/arch/arm/plat-mxc/devices/platform-mx1-camera.c @@ -0,0 +1,42 @@ +/* + * Copyright (C) 2010 Pengutronix + * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de> + * + * This program is free software; you can redistribute it and/or modify it under + * the terms of the GNU General Public License version 2 as published by the + * Free Software Foundation. + */ +#include <mach/hardware.h> +#include <mach/devices-common.h> + +#define imx_mx1_camera_data_entry_single(soc, _size) \ + { \ + .iobase = soc ## _CSI ## _BASE_ADDR, \ + .iosize = _size, \ + .irq = soc ## _INT_CSI, \ + } + +#ifdef CONFIG_SOC_IMX1 +const struct imx_mx1_camera_data imx1_mx1_camera_data __initconst = + imx_mx1_camera_data_entry_single(MX1, 10); +#endif /* ifdef CONFIG_SOC_IMX1 */ + +struct platform_device *__init imx_add_mx1_camera( + const struct imx_mx1_camera_data *data, + const struct mx1_camera_pdata *pdata) +{ + struct resource res[] = { + { + .start = data->iobase, + .end = data->iobase + data->iosize - 1, + .flags = IORESOURCE_MEM, + }, { + .start = data->irq, + .end = data->irq, + .flags = IORESOURCE_IRQ, + }, + }; + return imx_add_platform_device_dmamask("mx1-camera", 0, + res, ARRAY_SIZE(res), + pdata, sizeof(*pdata), DMA_BIT_MASK(32)); +} diff --git a/arch/arm/plat-mxc/devices/platform-mx2-camera.c b/arch/arm/plat-mxc/devices/platform-mx2-camera.c new file mode 100644 index 00000000000..b3f4828dc44 --- /dev/null +++ b/arch/arm/plat-mxc/devices/platform-mx2-camera.c @@ -0,0 +1,64 @@ +/* + * Copyright (C) 2010 Pengutronix + * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de> + * + * This program is free software; you can redistribute it and/or modify it under + * the terms of the GNU General Public License version 2 as published by the + * Free Software Foundation. + */ +#include <mach/hardware.h> +#include <mach/devices-common.h> + +#define imx_mx2_camera_data_entry_single(soc) \ + { \ + .iobasecsi = soc ## _CSI_BASE_ADDR, \ + .iosizecsi = SZ_4K, \ + .irqcsi = soc ## _INT_CSI, \ + } +#define imx_mx2_camera_data_entry_single_emma(soc) \ + { \ + .iobasecsi = soc ## _CSI_BASE_ADDR, \ + .iosizecsi = SZ_32, \ + .irqcsi = soc ## _INT_CSI, \ + .iobaseemmaprp = soc ## _EMMAPRP_BASE_ADDR, \ + .iosizeemmaprp = SZ_32, \ + .irqemmaprp = soc ## _INT_EMMAPRP, \ + } + +#ifdef CONFIG_SOC_IMX25 +const struct imx_mx2_camera_data imx25_mx2_camera_data __initconst = + imx_mx2_camera_data_entry_single(MX25); +#endif /* ifdef CONFIG_SOC_IMX25 */ + +#ifdef CONFIG_SOC_IMX27 +const struct imx_mx2_camera_data imx27_mx2_camera_data __initconst = + imx_mx2_camera_data_entry_single_emma(MX27); +#endif /* ifdef CONFIG_SOC_IMX27 */ + +struct platform_device *__init imx_add_mx2_camera( + const struct imx_mx2_camera_data *data, + const struct mx2_camera_platform_data *pdata) +{ + struct resource res[] = { + { + .start = data->iobasecsi, + .end = data->iobasecsi + data->iosizecsi - 1, + .flags = IORESOURCE_MEM, + }, { + .start = data->irqcsi, + .end = data->irqcsi, + .flags = IORESOURCE_IRQ, + }, { + .start = data->iobaseemmaprp, + .end = data->iobaseemmaprp + data->iosizeemmaprp - 1, + .flags = IORESOURCE_MEM, + }, { + .start = data->irqemmaprp, + .end = data->irqemmaprp, + .flags = IORESOURCE_IRQ, + }, + }; + return imx_add_platform_device_dmamask("mx2-camera", 0, + res, data->iobaseemmaprp ? 4 : 2, + pdata, sizeof(*pdata), DMA_BIT_MASK(32)); +} diff --git a/arch/arm/plat-mxc/devices/platform-mxc-ehci.c b/arch/arm/plat-mxc/devices/platform-mxc-ehci.c new file mode 100644 index 00000000000..cc488f4b620 --- /dev/null +++ b/arch/arm/plat-mxc/devices/platform-mxc-ehci.c @@ -0,0 +1,69 @@ +/* + * Copyright (C) 2010 Pengutronix + * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de> + * + * This program is free software; you can redistribute it and/or modify it under + * the terms of the GNU General Public License version 2 as published by the + * Free Software Foundation. + */ +#include <mach/hardware.h> +#include <mach/devices-common.h> + +#define imx_mxc_ehci_data_entry_single(soc, _id, hs) \ + { \ + .id = _id, \ + .iobase = soc ## _USB_ ## hs ## _BASE_ADDR, \ + .irq = soc ## _INT_USB_ ## hs, \ + } + +#ifdef CONFIG_SOC_IMX25 +const struct imx_mxc_ehci_data imx25_mxc_ehci_otg_data __initconst = + imx_mxc_ehci_data_entry_single(MX25, 0, OTG); +const struct imx_mxc_ehci_data imx25_mxc_ehci_hs_data __initconst = + imx_mxc_ehci_data_entry_single(MX25, 1, HS); +#endif /* ifdef CONFIG_SOC_IMX25 */ + +#ifdef CONFIG_SOC_IMX27 +const struct imx_mxc_ehci_data imx27_mxc_ehci_otg_data __initconst = + imx_mxc_ehci_data_entry_single(MX27, 0, OTG); +const struct imx_mxc_ehci_data imx27_mxc_ehci_hs_data[] __initconst = { + imx_mxc_ehci_data_entry_single(MX27, 1, HS1), + imx_mxc_ehci_data_entry_single(MX27, 2, HS2), +}; +#endif /* ifdef CONFIG_SOC_IMX27 */ + +#ifdef CONFIG_SOC_IMX31 +const struct imx_mxc_ehci_data imx31_mxc_ehci_otg_data __initconst = + imx_mxc_ehci_data_entry_single(MX31, 0, OTG); +const struct imx_mxc_ehci_data imx31_mxc_ehci_hs_data[] __initconst = { + imx_mxc_ehci_data_entry_single(MX31, 1, HS1), + imx_mxc_ehci_data_entry_single(MX31, 2, HS2), +}; +#endif /* ifdef CONFIG_SOC_IMX31 */ + +#ifdef CONFIG_SOC_IMX35 +const struct imx_mxc_ehci_data imx35_mxc_ehci_otg_data __initconst = + imx_mxc_ehci_data_entry_single(MX35, 0, OTG); +const struct imx_mxc_ehci_data imx35_mxc_ehci_hs_data __initconst = + imx_mxc_ehci_data_entry_single(MX35, 1, HS); +#endif /* ifdef CONFIG_SOC_IMX35 */ + +struct platform_device *__init imx_add_mxc_ehci( + const struct imx_mxc_ehci_data *data, + const struct mxc_usbh_platform_data *pdata) +{ + struct resource res[] = { + { + .start = data->iobase, + .end = data->iobase + SZ_512 - 1, + .flags = IORESOURCE_MEM, + }, { + .start = data->irq, + .end = data->irq, + .flags = IORESOURCE_IRQ, + }, + }; + return imx_add_platform_device_dmamask("mxc-ehci", data->id, + res, ARRAY_SIZE(res), + pdata, sizeof(*pdata), DMA_BIT_MASK(32)); +} diff --git a/arch/arm/plat-mxc/devices/platform-mxc-mmc.c b/arch/arm/plat-mxc/devices/platform-mxc-mmc.c new file mode 100644 index 00000000000..90d762f6f93 --- /dev/null +++ b/arch/arm/plat-mxc/devices/platform-mxc-mmc.c @@ -0,0 +1,72 @@ +/* + * Copyright (C) 2010 Pengutronix + * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de> + * + * This program is free software; you can redistribute it and/or modify it under + * the terms of the GNU General Public License version 2 as published by the + * Free Software Foundation. + */ +#include <mach/hardware.h> +#include <mach/devices-common.h> + +#define imx_mxc_mmc_data_entry_single(soc, _id, _hwid, _size) \ + { \ + .id = _id, \ + .iobase = soc ## _SDHC ## _hwid ## _BASE_ADDR, \ + .iosize = _size, \ + .irq = soc ## _INT_SDHC ## _hwid, \ + .dmareq = soc ## _DMA_REQ_SDHC ## _hwid, \ + } +#define imx_mxc_mmc_data_entry(soc, _id, _hwid, _size) \ + [_id] = imx_mxc_mmc_data_entry_single(soc, _id, _hwid, _size) + +#ifdef CONFIG_SOC_IMX21 +const struct imx_mxc_mmc_data imx21_mxc_mmc_data[] __initconst = { +#define imx21_mxc_mmc_data_entry(_id, _hwid) \ + imx_mxc_mmc_data_entry(MX21, _id, _hwid, SZ_4K) + imx21_mxc_mmc_data_entry(0, 1), + imx21_mxc_mmc_data_entry(1, 2), +}; +#endif /* ifdef CONFIG_SOC_IMX21 */ + +#ifdef CONFIG_SOC_IMX27 +const struct imx_mxc_mmc_data imx27_mxc_mmc_data[] __initconst = { +#define imx27_mxc_mmc_data_entry(_id, _hwid) \ + imx_mxc_mmc_data_entry(MX27, _id, _hwid, SZ_4K) + imx27_mxc_mmc_data_entry(0, 1), + imx27_mxc_mmc_data_entry(1, 2), +}; +#endif /* ifdef CONFIG_SOC_IMX27 */ + +#ifdef CONFIG_SOC_IMX31 +const struct imx_mxc_mmc_data imx31_mxc_mmc_data[] __initconst = { +#define imx31_mxc_mmc_data_entry(_id, _hwid) \ + imx_mxc_mmc_data_entry(MX31, _id, _hwid, SZ_16K) + imx31_mxc_mmc_data_entry(0, 1), + imx31_mxc_mmc_data_entry(1, 2), +}; +#endif /* ifdef CONFIG_SOC_IMX31 */ + +struct platform_device *__init imx_add_mxc_mmc( + const struct imx_mxc_mmc_data *data, + const struct imxmmc_platform_data *pdata) +{ + struct resource res[] = { + { + .start = data->iobase, + .end = data->iobase + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, { + .start = data->irq, + .end = data->irq, + .flags = IORESOURCE_IRQ, + }, { + .start = data->dmareq, + .end = data->dmareq, + .flags = IORESOURCE_DMA, + }, + }; + return imx_add_platform_device_dmamask("mxc-mmc", data->id, + res, ARRAY_SIZE(res), + pdata, sizeof(*pdata), DMA_BIT_MASK(32)); +} diff --git a/arch/arm/plat-mxc/devices/platform-mxc_nand.c b/arch/arm/plat-mxc/devices/platform-mxc_nand.c index 3fdcc32e3d6..1568f39fba8 100644 --- a/arch/arm/plat-mxc/devices/platform-mxc_nand.c +++ b/arch/arm/plat-mxc/devices/platform-mxc_nand.c @@ -31,27 +31,27 @@ const struct imx_mxc_nand_data imx21_mxc_nand_data __initconst = imx_mxc_nand_data_entry_single(MX21, SZ_4K); #endif /* ifdef CONFIG_SOC_IMX21 */ -#ifdef CONFIG_ARCH_MX25 +#ifdef CONFIG_SOC_IMX25 const struct imx_mxc_nand_data imx25_mxc_nand_data __initconst = imx_mxc_nand_data_entry_single(MX25, SZ_8K); -#endif /* ifdef CONFIG_ARCH_MX25 */ +#endif /* ifdef CONFIG_SOC_IMX25 */ #ifdef CONFIG_SOC_IMX27 const struct imx_mxc_nand_data imx27_mxc_nand_data __initconst = imx_mxc_nand_data_entry_single(MX27, SZ_4K); #endif /* ifdef CONFIG_SOC_IMX27 */ -#ifdef CONFIG_ARCH_MX31 +#ifdef CONFIG_SOC_IMX31 const struct imx_mxc_nand_data imx31_mxc_nand_data __initconst = imx_mxc_nand_data_entry_single(MX31, SZ_4K); #endif -#ifdef CONFIG_ARCH_MX35 +#ifdef CONFIG_SOC_IMX35 const struct imx_mxc_nand_data imx35_mxc_nand_data __initconst = imx_mxc_nand_data_entry_single(MX35, SZ_8K); #endif -#ifdef CONFIG_ARCH_MX51 +#ifdef CONFIG_SOC_IMX51 const struct imx_mxc_nand_data imx51_mxc_nand_data __initconst = imx_mxc_nandv3_data_entry_single(MX51, SZ_16K); #endif diff --git a/arch/arm/plat-mxc/devices/platform-mxc_pwm.c b/arch/arm/plat-mxc/devices/platform-mxc_pwm.c new file mode 100644 index 00000000000..3d8ebdba38e --- /dev/null +++ b/arch/arm/plat-mxc/devices/platform-mxc_pwm.c @@ -0,0 +1,60 @@ +/* + * Copyright (C) 2009-2010 Pengutronix + * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de> + * + * This program is free software; you can redistribute it and/or modify it under + * the terms of the GNU General Public License version 2 as published by the + * Free Software Foundation. + */ +#include <mach/hardware.h> +#include <mach/devices-common.h> + +#define imx_mxc_pwm_data_entry_single(soc, _id, _hwid, _size) \ + { \ + .id = _id, \ + .iobase = soc ## _PWM ## _hwid ## _BASE_ADDR, \ + .iosize = _size, \ + .irq = soc ## _INT_PWM ## _hwid, \ + } +#define imx_mxc_pwm_data_entry(soc, _id, _hwid, _size) \ + [_id] = imx_mxc_pwm_data_entry_single(soc, _id, _hwid, _size) + +#ifdef CONFIG_SOC_IMX21 +const struct imx_mxc_pwm_data imx21_mxc_pwm_data __initconst = + imx_mxc_pwm_data_entry_single(MX21, 0, , SZ_4K); +#endif /* ifdef CONFIG_SOC_IMX21 */ + +#ifdef CONFIG_SOC_IMX25 +const struct imx_mxc_pwm_data imx25_mxc_pwm_data[] __initconst = { +#define imx25_mxc_pwm_data_entry(_id, _hwid) \ + imx_mxc_pwm_data_entry(MX25, _id, _hwid, SZ_16K) + imx25_mxc_pwm_data_entry(0, 1), + imx25_mxc_pwm_data_entry(1, 2), + imx25_mxc_pwm_data_entry(2, 3), + imx25_mxc_pwm_data_entry(3, 4), +}; +#endif /* ifdef CONFIG_SOC_IMX25 */ + +#ifdef CONFIG_SOC_IMX27 +const struct imx_mxc_pwm_data imx27_mxc_pwm_data __initconst = + imx_mxc_pwm_data_entry_single(MX27, 0, , SZ_4K); +#endif /* ifdef CONFIG_SOC_IMX27 */ + +struct platform_device *__init imx_add_mxc_pwm( + const struct imx_mxc_pwm_data *data) +{ + struct resource res[] = { + { + .start = data->iobase, + .end = data->iobase + data->iosize - 1, + .flags = IORESOURCE_MEM, + }, { + .start = data->irq, + .end = data->irq, + .flags = IORESOURCE_IRQ, + }, + }; + + return imx_add_platform_device("mxc_pwm", data->id, + res, ARRAY_SIZE(res), NULL, 0); +} diff --git a/arch/arm/plat-mxc/devices/platform-mxc_rnga.c b/arch/arm/plat-mxc/devices/platform-mxc_rnga.c new file mode 100644 index 00000000000..b4b7612b6e1 --- /dev/null +++ b/arch/arm/plat-mxc/devices/platform-mxc_rnga.c @@ -0,0 +1,56 @@ +/* + * Copyright (C) 2010 Pengutronix + * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de> + * + * This program is free software; you can redistribute it and/or modify it under + * the terms of the GNU General Public License version 2 as published by the + * Free Software Foundation. + */ +#include <mach/hardware.h> +#include <mach/devices-common.h> + +struct imx_mxc_rnga_data { + resource_size_t iobase; +}; + +#define imx_mxc_rnga_data_entry_single(soc) \ + { \ + .iobase = soc ## _RNGA_BASE_ADDR, \ + } + +#ifdef CONFIG_SOC_IMX31 +static const struct imx_mxc_rnga_data imx31_mxc_rnga_data __initconst = + imx_mxc_rnga_data_entry_single(MX31); +#endif /* ifdef CONFIG_SOC_IMX31 */ + +static struct platform_device *__init imx_add_mxc_rnga( + const struct imx_mxc_rnga_data *data) +{ + struct resource res[] = { + { + .start = data->iobase, + .end = data->iobase + SZ_16K - 1, + .flags = IORESOURCE_MEM, + }, + }; + return imx_add_platform_device("mxc_rnga", -1, + res, ARRAY_SIZE(res), NULL, 0); +} + +static int __init imxXX_add_mxc_rnga(void) +{ + struct platform_device *ret; + +#if defined(CONFIG_SOC_IMX31) + if (cpu_is_mx31()) + ret = imx_add_mxc_rnga(&imx31_mxc_rnga_data); + else +#endif /* if defined(CONFIG_SOC_IMX31) */ + ret = ERR_PTR(-ENODEV); + + if (IS_ERR(ret)) + return PTR_ERR(ret); + + return 0; +} +arch_initcall(imxXX_add_mxc_rnga); diff --git a/arch/arm/plat-mxc/devices/platform-mxc_w1.c b/arch/arm/plat-mxc/devices/platform-mxc_w1.c new file mode 100644 index 00000000000..96fa5ea91fe --- /dev/null +++ b/arch/arm/plat-mxc/devices/platform-mxc_w1.c @@ -0,0 +1,50 @@ +/* + * Copyright (C) 2010 Pengutronix + * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de> + * + * This program is free software; you can redistribute it and/or modify it under + * the terms of the GNU General Public License version 2 as published by the + * Free Software Foundation. + */ +#include <mach/hardware.h> +#include <mach/devices-common.h> + +#define imx_mxc_w1_data_entry_single(soc) \ + { \ + .iobase = soc ## _OWIRE_BASE_ADDR, \ + } + +#ifdef CONFIG_SOC_IMX21 +const struct imx_mxc_w1_data imx21_mxc_w1_data __initconst = + imx_mxc_w1_data_entry_single(MX21); +#endif /* ifdef CONFIG_SOC_IMX21 */ + +#ifdef CONFIG_SOC_IMX27 +const struct imx_mxc_w1_data imx27_mxc_w1_data __initconst = + imx_mxc_w1_data_entry_single(MX27); +#endif /* ifdef CONFIG_SOC_IMX27 */ + +#ifdef CONFIG_SOC_IMX31 +const struct imx_mxc_w1_data imx31_mxc_w1_data __initconst = + imx_mxc_w1_data_entry_single(MX31); +#endif /* ifdef CONFIG_SOC_IMX31 */ + +#ifdef CONFIG_SOC_IMX35 +const struct imx_mxc_w1_data imx35_mxc_w1_data __initconst = + imx_mxc_w1_data_entry_single(MX35); +#endif /* ifdef CONFIG_SOC_IMX35 */ + +struct platform_device *__init imx_add_mxc_w1( + const struct imx_mxc_w1_data *data) +{ + struct resource res[] = { + { + .start = data->iobase, + .end = data->iobase + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, + }; + + return imx_add_platform_device("mxc_w1", 0, + res, ARRAY_SIZE(res), NULL, 0); +} diff --git a/arch/arm/plat-mxc/devices/platform-sdhci-esdhc-imx.c b/arch/arm/plat-mxc/devices/platform-sdhci-esdhc-imx.c new file mode 100644 index 00000000000..b3525648a01 --- /dev/null +++ b/arch/arm/plat-mxc/devices/platform-sdhci-esdhc-imx.c @@ -0,0 +1,74 @@ +/* + * Copyright (C) 2010 Pengutronix, Wolfram Sang <w.sang@pengutronix.de> + * + * This program is free software; you can redistribute it and/or modify it under + * the terms of the GNU General Public License version 2 as published by the + * Free Software Foundation. + */ + +#include <mach/hardware.h> +#include <mach/devices-common.h> +#include <mach/esdhc.h> + +#define imx_sdhci_esdhc_imx_data_entry_single(soc, _id, hwid) \ + { \ + .id = _id, \ + .iobase = soc ## _ESDHC ## hwid ## _BASE_ADDR, \ + .irq = soc ## _INT_ESDHC ## hwid, \ + } + +#define imx_sdhci_esdhc_imx_data_entry(soc, id, hwid) \ + [id] = imx_sdhci_esdhc_imx_data_entry_single(soc, id, hwid) + +#ifdef CONFIG_SOC_IMX25 +const struct imx_sdhci_esdhc_imx_data +imx25_sdhci_esdhc_imx_data[] __initconst = { +#define imx25_sdhci_esdhc_imx_data_entry(_id, _hwid) \ + imx_sdhci_esdhc_imx_data_entry(MX25, _id, _hwid) + imx25_sdhci_esdhc_imx_data_entry(0, 1), + imx25_sdhci_esdhc_imx_data_entry(1, 2), +}; +#endif /* ifdef CONFIG_SOC_IMX25 */ + +#ifdef CONFIG_SOC_IMX35 +const struct imx_sdhci_esdhc_imx_data +imx35_sdhci_esdhc_imx_data[] __initconst = { +#define imx35_sdhci_esdhc_imx_data_entry(_id, _hwid) \ + imx_sdhci_esdhc_imx_data_entry(MX35, _id, _hwid) + imx35_sdhci_esdhc_imx_data_entry(0, 1), + imx35_sdhci_esdhc_imx_data_entry(1, 2), + imx35_sdhci_esdhc_imx_data_entry(2, 3), +}; +#endif /* ifdef CONFIG_SOC_IMX35 */ + +#ifdef CONFIG_SOC_IMX51 +const struct imx_sdhci_esdhc_imx_data +imx51_sdhci_esdhc_imx_data[] __initconst = { +#define imx51_sdhci_esdhc_imx_data_entry(_id, _hwid) \ + imx_sdhci_esdhc_imx_data_entry(MX51, _id, _hwid) + imx51_sdhci_esdhc_imx_data_entry(0, 1), + imx51_sdhci_esdhc_imx_data_entry(1, 2), + imx51_sdhci_esdhc_imx_data_entry(2, 3), + imx51_sdhci_esdhc_imx_data_entry(3, 4), +}; +#endif /* ifdef CONFIG_SOC_IMX51 */ + +struct platform_device *__init imx_add_sdhci_esdhc_imx( + const struct imx_sdhci_esdhc_imx_data *data, + const struct esdhc_platform_data *pdata) +{ + struct resource res[] = { + { + .start = data->iobase, + .end = data->iobase + SZ_16K - 1, + .flags = IORESOURCE_MEM, + }, { + .start = data->irq, + .end = data->irq, + .flags = IORESOURCE_IRQ, + }, + }; + + return imx_add_platform_device("sdhci-esdhc-imx", data->id, res, + ARRAY_SIZE(res), pdata, sizeof(*pdata)); +} diff --git a/arch/arm/plat-mxc/devices/platform-spi_imx.c b/arch/arm/plat-mxc/devices/platform-spi_imx.c index 17f724c9452..8ea49adcdfc 100644 --- a/arch/arm/plat-mxc/devices/platform-spi_imx.c +++ b/arch/arm/plat-mxc/devices/platform-spi_imx.c @@ -30,7 +30,7 @@ const struct imx_spi_imx_data imx21_cspi_data[] __initconst = { }; #endif -#ifdef CONFIG_ARCH_MX25 +#ifdef CONFIG_SOC_IMX25 const struct imx_spi_imx_data imx25_cspi_data[] __initconst = { #define imx25_cspi_data_entry(_id, _hwid) \ imx_spi_imx_data_entry(MX25, CSPI, "imx25-cspi", _id, _hwid, SZ_16K) @@ -38,7 +38,7 @@ const struct imx_spi_imx_data imx25_cspi_data[] __initconst = { imx25_cspi_data_entry(1, 2), imx25_cspi_data_entry(2, 3), }; -#endif /* ifdef CONFIG_ARCH_MX25 */ +#endif /* ifdef CONFIG_SOC_IMX25 */ #ifdef CONFIG_SOC_IMX27 const struct imx_spi_imx_data imx27_cspi_data[] __initconst = { @@ -50,7 +50,7 @@ const struct imx_spi_imx_data imx27_cspi_data[] __initconst = { }; #endif /* ifdef CONFIG_SOC_IMX27 */ -#ifdef CONFIG_ARCH_MX31 +#ifdef CONFIG_SOC_IMX31 const struct imx_spi_imx_data imx31_cspi_data[] __initconst = { #define imx31_cspi_data_entry(_id, _hwid) \ imx_spi_imx_data_entry(MX31, CSPI, "imx31-cspi", _id, _hwid, SZ_4K) @@ -58,18 +58,18 @@ const struct imx_spi_imx_data imx31_cspi_data[] __initconst = { imx31_cspi_data_entry(1, 2), imx31_cspi_data_entry(2, 3), }; -#endif /* ifdef CONFIG_ARCH_MX31 */ +#endif /* ifdef CONFIG_SOC_IMX31 */ -#ifdef CONFIG_ARCH_MX35 +#ifdef CONFIG_SOC_IMX35 const struct imx_spi_imx_data imx35_cspi_data[] __initconst = { #define imx35_cspi_data_entry(_id, _hwid) \ imx_spi_imx_data_entry(MX35, CSPI, "imx35-cspi", _id, _hwid, SZ_4K) imx35_cspi_data_entry(0, 1), imx35_cspi_data_entry(1, 2), }; -#endif /* ifdef CONFIG_ARCH_MX35 */ +#endif /* ifdef CONFIG_SOC_IMX35 */ -#ifdef CONFIG_ARCH_MX51 +#ifdef CONFIG_SOC_IMX51 const struct imx_spi_imx_data imx51_cspi_data __initconst = imx_spi_imx_data_entry_single(MX51, CSPI, "imx51-cspi", 0, , SZ_4K); @@ -79,7 +79,7 @@ const struct imx_spi_imx_data imx51_ecspi_data[] __initconst = { imx51_ecspi_data_entry(0, 1), imx51_ecspi_data_entry(1, 2), }; -#endif /* ifdef CONFIG_ARCH_MX51 */ +#endif /* ifdef CONFIG_SOC_IMX51 */ struct platform_device *__init imx_add_spi_imx( const struct imx_spi_imx_data *data, diff --git a/arch/arm/plat-mxc/ehci.c b/arch/arm/plat-mxc/ehci.c index 9915607683d..8772ce346a5 100644 --- a/arch/arm/plat-mxc/ehci.c +++ b/arch/arm/plat-mxc/ehci.c @@ -49,6 +49,7 @@ #define MXC_OTG_OFFSET 0 #define MXC_H1_OFFSET 0x200 +#define MXC_H2_OFFSET 0x400 /* USB_CTRL */ #define MXC_OTG_UCTRL_OWIE_BIT (1 << 27) /* OTG wakeup intr enable */ @@ -61,6 +62,11 @@ #define MXC_OTG_PHYCTRL_OC_DIS_BIT (1 << 8) /* OTG Disable Overcurrent Event */ #define MXC_H1_OC_DIS_BIT (1 << 5) /* UH1 Disable Overcurrent Event */ +/* USBH2CTRL */ +#define MXC_H2_UCTRL_H2UIE_BIT (1 << 8) +#define MXC_H2_UCTRL_H2WIE_BIT (1 << 7) +#define MXC_H2_UCTRL_H2PM_BIT (1 << 4) + #define MXC_USBCMD_OFFSET 0x140 /* USBCMD */ @@ -69,9 +75,9 @@ int mxc_initialize_usb_hw(int port, unsigned int flags) { unsigned int v; -#if defined(CONFIG_ARCH_MX25) +#if defined(CONFIG_SOC_IMX25) if (cpu_is_mx25()) { - v = readl(MX25_IO_ADDRESS(MX25_OTG_BASE_ADDR + + v = readl(MX25_IO_ADDRESS(MX25_USB_BASE_ADDR + USBCTRL_OTGBASE_OFFSET)); switch (port) { @@ -108,14 +114,14 @@ int mxc_initialize_usb_hw(int port, unsigned int flags) return -EINVAL; } - writel(v, MX25_IO_ADDRESS(MX25_OTG_BASE_ADDR + + writel(v, MX25_IO_ADDRESS(MX25_USB_BASE_ADDR + USBCTRL_OTGBASE_OFFSET)); return 0; } -#endif /* CONFIG_ARCH_MX25 */ +#endif /* if defined(CONFIG_SOC_IMX25) */ #if defined(CONFIG_ARCH_MX3) if (cpu_is_mx31()) { - v = readl(MX31_IO_ADDRESS(MX31_OTG_BASE_ADDR + + v = readl(MX31_IO_ADDRESS(MX31_USB_BASE_ADDR + USBCTRL_OTGBASE_OFFSET)); switch (port) { @@ -153,13 +159,13 @@ int mxc_initialize_usb_hw(int port, unsigned int flags) return -EINVAL; } - writel(v, MX31_IO_ADDRESS(MX31_OTG_BASE_ADDR + + writel(v, MX31_IO_ADDRESS(MX31_USB_BASE_ADDR + USBCTRL_OTGBASE_OFFSET)); return 0; } if (cpu_is_mx35()) { - v = readl(MX35_IO_ADDRESS(MX35_OTG_BASE_ADDR + + v = readl(MX35_IO_ADDRESS(MX35_USB_BASE_ADDR + USBCTRL_OTGBASE_OFFSET)); switch (port) { @@ -196,7 +202,7 @@ int mxc_initialize_usb_hw(int port, unsigned int flags) return -EINVAL; } - writel(v, MX35_IO_ADDRESS(MX35_OTG_BASE_ADDR + + writel(v, MX35_IO_ADDRESS(MX35_USB_BASE_ADDR + USBCTRL_OTGBASE_OFFSET)); return 0; } @@ -206,7 +212,7 @@ int mxc_initialize_usb_hw(int port, unsigned int flags) /* On i.MX27 we can use the i.MX31 USBCTRL bits, they * are identical */ - v = readl(MX27_IO_ADDRESS(MX27_OTG_BASE_ADDR + + v = readl(MX27_IO_ADDRESS(MX27_USB_BASE_ADDR + USBCTRL_OTGBASE_OFFSET)); switch (port) { case 0: /* OTG port */ @@ -241,12 +247,12 @@ int mxc_initialize_usb_hw(int port, unsigned int flags) default: return -EINVAL; } - writel(v, MX27_IO_ADDRESS(MX27_OTG_BASE_ADDR + + writel(v, MX27_IO_ADDRESS(MX27_USB_BASE_ADDR + USBCTRL_OTGBASE_OFFSET)); return 0; } #endif /* CONFIG_MACH_MX27 */ -#ifdef CONFIG_ARCH_MX51 +#ifdef CONFIG_SOC_IMX51 if (cpu_is_mx51()) { void __iomem *usb_base; void __iomem *usbotg_base; @@ -254,6 +260,10 @@ int mxc_initialize_usb_hw(int port, unsigned int flags) int ret = 0; usb_base = ioremap(MX51_OTG_BASE_ADDR, SZ_4K); + if (!usb_base) { + printk(KERN_ERR "%s(): ioremap failed\n", __func__); + return -ENOMEM; + } switch (port) { case 0: /* OTG port */ @@ -262,6 +272,9 @@ int mxc_initialize_usb_hw(int port, unsigned int flags) case 1: /* Host 1 port */ usbotg_base = usb_base + MXC_H1_OFFSET; break; + case 2: /* Host 2 port */ + usbotg_base = usb_base + MXC_H2_OFFSET; + break; default: printk(KERN_ERR"%s no such port %d\n", __func__, port); ret = -ENOENT; @@ -274,10 +287,13 @@ int mxc_initialize_usb_hw(int port, unsigned int flags) if (flags & MXC_EHCI_INTERNAL_PHY) { v = __raw_readl(usbother_base + MXC_USB_PHY_CTR_FUNC_OFFSET); - if (flags & MXC_EHCI_POWER_PINS_ENABLED) - v |= (MXC_OTG_PHYCTRL_OC_DIS_BIT | MXC_OTG_UCTRL_OPM_BIT); /* OC/USBPWR is not used */ - else - v &= ~(MXC_OTG_PHYCTRL_OC_DIS_BIT | MXC_OTG_UCTRL_OPM_BIT); /* OC/USBPWR is used */ + if (flags & MXC_EHCI_POWER_PINS_ENABLED) { + /* OC/USBPWR is not used */ + v |= MXC_OTG_PHYCTRL_OC_DIS_BIT; + } else { + /* OC/USBPWR is used */ + v &= ~MXC_OTG_PHYCTRL_OC_DIS_BIT; + } __raw_writel(v, usbother_base + MXC_USB_PHY_CTR_FUNC_OFFSET); v = __raw_readl(usbother_base + MXC_USBCTRL_OFFSET); @@ -285,16 +301,23 @@ int mxc_initialize_usb_hw(int port, unsigned int flags) v |= MXC_OTG_UCTRL_OWIE_BIT;/* OTG wakeup enable */ else v &= ~MXC_OTG_UCTRL_OWIE_BIT;/* OTG wakeup disable */ + if (flags & MXC_EHCI_POWER_PINS_ENABLED) + v |= MXC_OTG_UCTRL_OPM_BIT; + else + v &= ~MXC_OTG_UCTRL_OPM_BIT; __raw_writel(v, usbother_base + MXC_USBCTRL_OFFSET); } break; case 1: /* Host 1 */ /*Host ULPI */ v = __raw_readl(usbother_base + MXC_USBCTRL_OFFSET); - if (flags & MXC_EHCI_WAKEUP_ENABLED) - v &= ~(MXC_H1_UCTRL_H1WIE_BIT | MXC_H1_UCTRL_H1UIE_BIT);/* HOST1 wakeup/ULPI intr disable */ - else - v &= ~(MXC_H1_UCTRL_H1WIE_BIT | MXC_H1_UCTRL_H1UIE_BIT);/* HOST1 wakeup/ULPI intr disable */ + if (flags & MXC_EHCI_WAKEUP_ENABLED) { + /* HOST1 wakeup/ULPI intr enable */ + v |= (MXC_H1_UCTRL_H1WIE_BIT | MXC_H1_UCTRL_H1UIE_BIT); + } else { + /* HOST1 wakeup/ULPI intr disable */ + v &= ~(MXC_H1_UCTRL_H1WIE_BIT | MXC_H1_UCTRL_H1UIE_BIT); + } if (flags & MXC_EHCI_POWER_PINS_ENABLED) v &= ~MXC_H1_UCTRL_H1PM_BIT; /* HOST1 power mask used*/ @@ -315,6 +338,22 @@ int mxc_initialize_usb_hw(int port, unsigned int flags) v &= MXC_UCMD_ITC_NO_THRESHOLD_MASK; __raw_writel(v, usbotg_base + MXC_USBCMD_OFFSET); break; + case 2: /* Host 2 ULPI */ + v = __raw_readl(usbother_base + MXC_USBH2CTRL_OFFSET); + if (flags & MXC_EHCI_WAKEUP_ENABLED) { + /* HOST1 wakeup/ULPI intr enable */ + v |= (MXC_H2_UCTRL_H2WIE_BIT | MXC_H2_UCTRL_H2UIE_BIT); + } else { + /* HOST1 wakeup/ULPI intr disable */ + v &= ~(MXC_H2_UCTRL_H2WIE_BIT | MXC_H2_UCTRL_H2UIE_BIT); + } + + if (flags & MXC_EHCI_POWER_PINS_ENABLED) + v &= ~MXC_H2_UCTRL_H2PM_BIT; /* HOST2 power mask used*/ + else + v |= MXC_H2_UCTRL_H2PM_BIT; /* HOST2 power mask used*/ + __raw_writel(v, usbother_base + MXC_USBH2CTRL_OFFSET); + break; } error: diff --git a/arch/arm/plat-mxc/gpio.c b/arch/arm/plat-mxc/gpio.c index 9c3e36232b5..bc2c7bc6f10 100644 --- a/arch/arm/plat-mxc/gpio.c +++ b/arch/arm/plat-mxc/gpio.c @@ -175,7 +175,7 @@ static void mxc_gpio_irq_handler(struct mxc_gpio_port *port, u32 irq_stat) static void mx3_gpio_irq_handler(u32 irq, struct irq_desc *desc) { u32 irq_stat; - struct mxc_gpio_port *port = (struct mxc_gpio_port *)get_irq_data(irq); + struct mxc_gpio_port *port = get_irq_data(irq); irq_stat = __raw_readl(port->base + GPIO_ISR) & __raw_readl(port->base + GPIO_IMR); @@ -188,7 +188,7 @@ static void mx2_gpio_irq_handler(u32 irq, struct irq_desc *desc) { int i; u32 irq_msk, irq_stat; - struct mxc_gpio_port *port = (struct mxc_gpio_port *)get_irq_data(irq); + struct mxc_gpio_port *port = get_irq_data(irq); /* walk through all interrupt status registers */ for (i = 0; i < gpio_table_size; i++) { @@ -349,3 +349,113 @@ int __init mxc_gpio_init(struct mxc_gpio_port *port, int cnt) return 0; } + +#define DEFINE_IMX_GPIO_PORT_IRQ_HIGH(soc, _id, _hwid, _irq, _irq_high) \ + { \ + .chip.label = "gpio-" #_id, \ + .irq = _irq, \ + .irq_high = _irq_high, \ + .base = soc ## _IO_ADDRESS( \ + soc ## _GPIO ## _hwid ## _BASE_ADDR), \ + .virtual_irq_start = MXC_GPIO_IRQ_START + (_id) * 32, \ + } + +#define DEFINE_IMX_GPIO_PORT_IRQ(soc, _id, _hwid, _irq) \ + DEFINE_IMX_GPIO_PORT_IRQ_HIGH(soc, _id, _hwid, _irq, 0) +#define DEFINE_IMX_GPIO_PORT(soc, _id, _hwid) \ + DEFINE_IMX_GPIO_PORT_IRQ(soc, _id, _hwid, 0) + +#define DEFINE_REGISTER_FUNCTION(prefix) \ +int __init prefix ## _register_gpios(void) \ +{ \ + return mxc_gpio_init(prefix ## _gpio_ports, \ + ARRAY_SIZE(prefix ## _gpio_ports)); \ +} + +#if defined(CONFIG_SOC_IMX1) +static struct mxc_gpio_port imx1_gpio_ports[] = { + DEFINE_IMX_GPIO_PORT_IRQ(MX1, 0, 1, MX1_GPIO_INT_PORTA), + DEFINE_IMX_GPIO_PORT_IRQ(MX1, 1, 2, MX1_GPIO_INT_PORTB), + DEFINE_IMX_GPIO_PORT_IRQ(MX1, 2, 3, MX1_GPIO_INT_PORTC), + DEFINE_IMX_GPIO_PORT_IRQ(MX1, 3, 4, MX1_GPIO_INT_PORTD), +}; + +DEFINE_REGISTER_FUNCTION(imx1) + +#endif /* if defined(CONFIG_SOC_IMX1) */ + +#if defined(CONFIG_SOC_IMX21) +static struct mxc_gpio_port imx21_gpio_ports[] = { + DEFINE_IMX_GPIO_PORT_IRQ(MX21, 0, 1, MX21_INT_GPIO), + DEFINE_IMX_GPIO_PORT(MX21, 1, 2), + DEFINE_IMX_GPIO_PORT(MX21, 2, 3), + DEFINE_IMX_GPIO_PORT(MX21, 3, 4), + DEFINE_IMX_GPIO_PORT(MX21, 4, 5), + DEFINE_IMX_GPIO_PORT(MX21, 5, 6), +}; + +DEFINE_REGISTER_FUNCTION(imx21) + +#endif /* if defined(CONFIG_SOC_IMX21) */ + +#if defined(CONFIG_SOC_IMX25) +static struct mxc_gpio_port imx25_gpio_ports[] = { + DEFINE_IMX_GPIO_PORT_IRQ(MX25, 0, 1, MX25_INT_GPIO1), + DEFINE_IMX_GPIO_PORT_IRQ(MX25, 1, 2, MX25_INT_GPIO2), + DEFINE_IMX_GPIO_PORT_IRQ(MX25, 2, 3, MX25_INT_GPIO3), + DEFINE_IMX_GPIO_PORT_IRQ(MX25, 3, 4, MX25_INT_GPIO4), +}; + +DEFINE_REGISTER_FUNCTION(imx25) + +#endif /* if defined(CONFIG_SOC_IMX25) */ + +#if defined(CONFIG_SOC_IMX27) +static struct mxc_gpio_port imx27_gpio_ports[] = { + DEFINE_IMX_GPIO_PORT_IRQ(MX27, 0, 1, MX27_INT_GPIO), + DEFINE_IMX_GPIO_PORT(MX27, 1, 2), + DEFINE_IMX_GPIO_PORT(MX27, 2, 3), + DEFINE_IMX_GPIO_PORT(MX27, 3, 4), + DEFINE_IMX_GPIO_PORT(MX27, 4, 5), + DEFINE_IMX_GPIO_PORT(MX27, 5, 6), +}; + +DEFINE_REGISTER_FUNCTION(imx27) + +#endif /* if defined(CONFIG_SOC_IMX27) */ + +#if defined(CONFIG_SOC_IMX31) +static struct mxc_gpio_port imx31_gpio_ports[] = { + DEFINE_IMX_GPIO_PORT_IRQ(MX31, 0, 1, MX31_INT_GPIO1), + DEFINE_IMX_GPIO_PORT_IRQ(MX31, 1, 2, MX31_INT_GPIO2), + DEFINE_IMX_GPIO_PORT_IRQ(MX31, 2, 3, MX31_INT_GPIO3), +}; + +DEFINE_REGISTER_FUNCTION(imx31) + +#endif /* if defined(CONFIG_SOC_IMX31) */ + +#if defined(CONFIG_SOC_IMX35) +static struct mxc_gpio_port imx35_gpio_ports[] = { + DEFINE_IMX_GPIO_PORT_IRQ(MX35, 0, 1, MX35_INT_GPIO1), + DEFINE_IMX_GPIO_PORT_IRQ(MX35, 1, 2, MX35_INT_GPIO2), + DEFINE_IMX_GPIO_PORT_IRQ(MX35, 2, 3, MX35_INT_GPIO3), +}; + +DEFINE_REGISTER_FUNCTION(imx35) + +#endif /* if defined(CONFIG_SOC_IMX35) */ + +#if defined(CONFIG_SOC_IMX50) +static struct mxc_gpio_port imx50_gpio_ports[] = { + DEFINE_IMX_GPIO_PORT_IRQ_HIGH(MX50, 0, 1, MX50_INT_GPIO1_LOW, MX50_INT_GPIO1_HIGH), + DEFINE_IMX_GPIO_PORT_IRQ_HIGH(MX50, 1, 2, MX50_INT_GPIO2_LOW, MX50_INT_GPIO2_HIGH), + DEFINE_IMX_GPIO_PORT_IRQ_HIGH(MX50, 2, 3, MX50_INT_GPIO3_LOW, MX50_INT_GPIO3_HIGH), + DEFINE_IMX_GPIO_PORT_IRQ_HIGH(MX50, 3, 4, MX50_INT_GPIO3_LOW, MX50_INT_GPIO3_HIGH), + DEFINE_IMX_GPIO_PORT_IRQ_HIGH(MX50, 4, 5, MX50_INT_GPIO3_LOW, MX50_INT_GPIO3_HIGH), + DEFINE_IMX_GPIO_PORT_IRQ_HIGH(MX50, 5, 6, MX50_INT_GPIO3_LOW, MX50_INT_GPIO3_HIGH), +}; + +DEFINE_REGISTER_FUNCTION(imx50) + +#endif /* if defined(CONFIG_SOC_IMX50) */ diff --git a/arch/arm/plat-mxc/include/mach/common.h b/arch/arm/plat-mxc/include/mach/common.h index 7a1e1f89ff0..aea2cd3b6d1 100644 --- a/arch/arm/plat-mxc/include/mach/common.h +++ b/arch/arm/plat-mxc/include/mach/common.h @@ -20,7 +20,9 @@ extern void mx25_map_io(void); extern void mx27_map_io(void); extern void mx31_map_io(void); extern void mx35_map_io(void); +extern void mx50_map_io(void); extern void mx51_map_io(void); +extern void mx53_map_io(void); extern void mxc91231_map_io(void); extern void mxc_init_irq(void __iomem *); extern void tzic_init_irq(void __iomem *); @@ -30,7 +32,9 @@ extern void mx25_init_irq(void); extern void mx27_init_irq(void); extern void mx31_init_irq(void); extern void mx35_init_irq(void); +extern void mx50_init_irq(void); extern void mx51_init_irq(void); +extern void mx53_init_irq(void); extern void mxc91231_init_irq(void); extern void epit_timer_init(struct clk *timer_clk, void __iomem *base, int irq); extern void mxc_timer_init(struct clk *timer_clk, void __iomem *, int); @@ -42,6 +46,8 @@ extern int mx31_clocks_init(unsigned long fref); extern int mx35_clocks_init(void); extern int mx51_clocks_init(unsigned long ckil, unsigned long osc, unsigned long ckih1, unsigned long ckih2); +extern int mx53_clocks_init(unsigned long ckil, unsigned long osc, + unsigned long ckih1, unsigned long ckih2); extern int mxc91231_clocks_init(unsigned long fref); extern int mxc_register_gpios(void); extern int mxc_register_device(struct platform_device *pdev, void *data); @@ -50,5 +56,6 @@ extern void mxc_arch_reset_init(void __iomem *); extern void mxc91231_power_off(void); extern void mxc91231_arch_reset(int, const char *); extern void mxc91231_prepare_idle(void); - +extern void mx51_efikamx_reset(void); +extern int mx53_revision(void); #endif diff --git a/arch/arm/plat-mxc/include/mach/debug-macro.S b/arch/arm/plat-mxc/include/mach/debug-macro.S index d56213fb901..3b3a37c25c5 100644 --- a/arch/arm/plat-mxc/include/mach/debug-macro.S +++ b/arch/arm/plat-mxc/include/mach/debug-macro.S @@ -10,58 +10,49 @@ * published by the Free Software Foundation. * */ -#define IMX_NEEDS_DEPRECATED_SYMBOLS +#include <mach/hardware.h> #ifdef CONFIG_ARCH_MX1 -#include <mach/mx1.h> -#define UART_PADDR UART1_BASE_ADDR -#define UART_VADDR IO_ADDRESS(UART1_BASE_ADDR) +#define UART_PADDR MX1_UART1_BASE_ADDR #endif #ifdef CONFIG_ARCH_MX25 #ifdef UART_PADDR #error "CONFIG_DEBUG_LL is incompatible with multiple archs" #endif -#include <mach/mx25.h> #define UART_PADDR MX25_UART1_BASE_ADDR -#define UART_VADDR MX25_AIPS1_IO_ADDRESS(MX25_UART1_BASE_ADDR) #endif #ifdef CONFIG_ARCH_MX2 #ifdef UART_PADDR #error "CONFIG_DEBUG_LL is incompatible with multiple archs" #endif -#include <mach/mx2x.h> -#define UART_PADDR UART1_BASE_ADDR -#define UART_VADDR AIPI_IO_ADDRESS(UART1_BASE_ADDR) +#define UART_PADDR MX2x_UART1_BASE_ADDR #endif #ifdef CONFIG_ARCH_MX3 #ifdef UART_PADDR #error "CONFIG_DEBUG_LL is incompatible with multiple archs" #endif -#include <mach/mx3x.h> -#define UART_PADDR UART1_BASE_ADDR -#define UART_VADDR AIPS1_IO_ADDRESS(UART1_BASE_ADDR) +#define UART_PADDR MX3x_UART1_BASE_ADDR #endif #ifdef CONFIG_ARCH_MX5 #ifdef UART_PADDR #error "CONFIG_DEBUG_LL is incompatible with multiple archs" #endif -#include <mach/mx51.h> #define UART_PADDR MX51_UART1_BASE_ADDR -#define UART_VADDR MX51_AIPS1_IO_ADDRESS(MX51_UART1_BASE_ADDR) #endif #ifdef CONFIG_ARCH_MXC91231 #ifdef UART_PADDR #error "CONFIG_DEBUG_LL is incompatible with multiple archs" #endif -#include <mach/mxc91231.h> #define UART_PADDR MXC91231_UART2_BASE_ADDR -#define UART_VADDR MXC91231_IO_ADDRESS(MXC91231_UART2_BASE_ADDR) #endif + +#define UART_VADDR IMX_IO_ADDRESS(UART_PADDR) + .macro addruart, rp, rv ldr \rp, =UART_PADDR @ physical ldr \rv, =UART_VADDR @ virtual diff --git a/arch/arm/plat-mxc/include/mach/devices-common.h b/arch/arm/plat-mxc/include/mach/devices-common.h index 8c6896fd1e5..8658c9caa65 100644 --- a/arch/arm/plat-mxc/include/mach/devices-common.h +++ b/arch/arm/plat-mxc/include/mach/devices-common.h @@ -10,9 +10,19 @@ #include <linux/platform_device.h> #include <linux/init.h> -struct platform_device *imx_add_platform_device(const char *name, int id, +struct platform_device *imx_add_platform_device_dmamask( + const char *name, int id, const struct resource *res, unsigned int num_resources, - const void *data, size_t size_data); + const void *data, size_t size_data, u64 dmamask); + +static inline struct platform_device *imx_add_platform_device( + const char *name, int id, + const struct resource *res, unsigned int num_resources, + const void *data, size_t size_data) +{ + return imx_add_platform_device_dmamask( + name, id, res, num_resources, data, size_data, 0); +} #include <linux/fec.h> struct imx_fec_data { @@ -24,15 +34,63 @@ struct platform_device *__init imx_add_fec( const struct fec_platform_data *pdata); #include <linux/can/platform/flexcan.h> -struct platform_device *__init imx_add_flexcan(int id, - resource_size_t iobase, resource_size_t iosize, - resource_size_t irq, +struct imx_flexcan_data { + int id; + resource_size_t iobase; + resource_size_t iosize; + resource_size_t irq; +}; +struct platform_device *__init imx_add_flexcan( + const struct imx_flexcan_data *data, const struct flexcan_platform_data *pdata); +#include <linux/fsl_devices.h> +struct imx_fsl_usb2_udc_data { + resource_size_t iobase; + resource_size_t irq; +}; +struct platform_device *__init imx_add_fsl_usb2_udc( + const struct imx_fsl_usb2_udc_data *data, + const struct fsl_usb2_platform_data *pdata); + #include <linux/gpio_keys.h> struct platform_device *__init imx_add_gpio_keys( const struct gpio_keys_platform_data *pdata); +#include <mach/mx21-usbhost.h> +struct imx_imx21_hcd_data { + resource_size_t iobase; + resource_size_t irq; +}; +struct platform_device *__init imx_add_imx21_hcd( + const struct imx_imx21_hcd_data *data, + const struct mx21_usbh_platform_data *pdata); + +struct imx_imx2_wdt_data { + int id; + resource_size_t iobase; + resource_size_t iosize; +}; +struct platform_device *__init imx_add_imx2_wdt( + const struct imx_imx2_wdt_data *data); + +struct imx_imxdi_rtc_data { + resource_size_t iobase; + resource_size_t irq; +}; +struct platform_device *__init imx_add_imxdi_rtc( + const struct imx_imxdi_rtc_data *data); + +#include <mach/imxfb.h> +struct imx_imx_fb_data { + resource_size_t iobase; + resource_size_t iosize; + resource_size_t irq; +}; +struct platform_device *__init imx_add_imx_fb( + const struct imx_imx_fb_data *data, + const struct imx_fb_platform_data *pdata); + #include <mach/i2c.h> struct imx_imx_i2c_data { int id; @@ -44,6 +102,16 @@ struct platform_device *__init imx_add_imx_i2c( const struct imx_imx_i2c_data *data, const struct imxi2c_platform_data *pdata); +#include <linux/input/matrix_keypad.h> +struct imx_imx_keypad_data { + resource_size_t iobase; + resource_size_t iosize; + resource_size_t irq; +}; +struct platform_device *__init imx_add_imx_keypad( + const struct imx_imx_keypad_data *data, + const struct matrix_keymap_data *pdata); + #include <mach/ssi.h> struct imx_imx_ssi_data { int id; @@ -82,6 +150,67 @@ struct platform_device *__init imx_add_imx_uart_1irq( const struct imx_imx_uart_1irq_data *data, const struct imxuart_platform_data *pdata); +#include <mach/usb.h> +struct imx_imx_udc_data { + resource_size_t iobase; + resource_size_t iosize; + resource_size_t irq0; + resource_size_t irq1; + resource_size_t irq2; + resource_size_t irq3; + resource_size_t irq4; + resource_size_t irq5; + resource_size_t irq6; +}; +struct platform_device *__init imx_add_imx_udc( + const struct imx_imx_udc_data *data, + const struct imxusb_platform_data *pdata); + +#include <mach/mx1_camera.h> +struct imx_mx1_camera_data { + resource_size_t iobase; + resource_size_t iosize; + resource_size_t irq; +}; +struct platform_device *__init imx_add_mx1_camera( + const struct imx_mx1_camera_data *data, + const struct mx1_camera_pdata *pdata); + +#include <mach/mx2_cam.h> +struct imx_mx2_camera_data { + resource_size_t iobasecsi; + resource_size_t iosizecsi; + resource_size_t irqcsi; + resource_size_t iobaseemmaprp; + resource_size_t iosizeemmaprp; + resource_size_t irqemmaprp; +}; +struct platform_device *__init imx_add_mx2_camera( + const struct imx_mx2_camera_data *data, + const struct mx2_camera_platform_data *pdata); + +#include <mach/mxc_ehci.h> +struct imx_mxc_ehci_data { + int id; + resource_size_t iobase; + resource_size_t irq; +}; +struct platform_device *__init imx_add_mxc_ehci( + const struct imx_mxc_ehci_data *data, + const struct mxc_usbh_platform_data *pdata); + +#include <mach/mmc.h> +struct imx_mxc_mmc_data { + int id; + resource_size_t iobase; + resource_size_t iosize; + resource_size_t irq; + resource_size_t dmareq; +}; +struct platform_device *__init imx_add_mxc_mmc( + const struct imx_mxc_mmc_data *data, + const struct imxmmc_platform_data *pdata); + #include <mach/mxc_nand.h> struct imx_mxc_nand_data { /* @@ -99,24 +228,39 @@ struct platform_device *__init imx_add_mxc_nand( const struct imx_mxc_nand_data *data, const struct mxc_nand_platform_data *pdata); -#include <mach/spi.h> -struct imx_spi_imx_data { - const char *devid; +struct imx_mxc_pwm_data { int id; resource_size_t iobase; resource_size_t iosize; - int irq; + resource_size_t irq; }; -struct platform_device *__init imx_add_spi_imx( - const struct imx_spi_imx_data *data, - const struct spi_imx_master *pdata); +struct platform_device *__init imx_add_mxc_pwm( + const struct imx_mxc_pwm_data *data); + +struct imx_mxc_w1_data { + resource_size_t iobase; +}; +struct platform_device *__init imx_add_mxc_w1( + const struct imx_mxc_w1_data *data); #include <mach/esdhc.h> -struct imx_esdhc_imx_data { +struct imx_sdhci_esdhc_imx_data { int id; resource_size_t iobase; resource_size_t irq; }; -struct platform_device *__init imx_add_esdhc( - const struct imx_esdhc_imx_data *data, +struct platform_device *__init imx_add_sdhci_esdhc_imx( + const struct imx_sdhci_esdhc_imx_data *data, const struct esdhc_platform_data *pdata); + +#include <mach/spi.h> +struct imx_spi_imx_data { + const char *devid; + int id; + resource_size_t iobase; + resource_size_t iosize; + int irq; +}; +struct platform_device *__init imx_add_spi_imx( + const struct imx_spi_imx_data *data, + const struct spi_imx_master *pdata); diff --git a/arch/arm/plat-mxc/include/mach/entry-macro.S b/arch/arm/plat-mxc/include/mach/entry-macro.S index aeb08697726..bd9bb979914 100644 --- a/arch/arm/plat-mxc/include/mach/entry-macro.S +++ b/arch/arm/plat-mxc/include/mach/entry-macro.S @@ -54,15 +54,15 @@ #elif defined CONFIG_MXC_TZIC @ Load offset & priority of the highest priority @ interrupt pending. + @ 0x080 is INTSEC0 register @ 0xD80 is HIPND0 register mov \irqnr, #0 - mov \irqstat, #0x0D80 -1000: - ldr \tmp, [\irqstat, \base] - cmp \tmp, #0 - bne 1001f - addeq \irqnr, \irqnr, #32 - addeq \irqstat, \irqstat, #4 +1000: add \irqstat, \base, \irqnr, lsr #3 + ldr \tmp, [\irqstat, #0xd80] + ldr \irqstat, [\irqstat, #0x080] + ands \tmp, \tmp, \irqstat + bne 1001f + add \irqnr, \irqnr, #32 cmp \irqnr, #128 blo 1000b b 2001f diff --git a/arch/arm/plat-mxc/include/mach/gpio.h b/arch/arm/plat-mxc/include/mach/gpio.h index af33b74f569..0044e2f1bea 100644 --- a/arch/arm/plat-mxc/include/mach/gpio.h +++ b/arch/arm/plat-mxc/include/mach/gpio.h @@ -23,6 +23,11 @@ #include <mach/hardware.h> #include <asm-generic/gpio.h> + +/* There's a off-by-one betweem the gpio bank number and the gpiochip */ +/* range e.g. GPIO_1_5 is gpio 5 under linux */ +#define IMX_GPIO_NR(bank, nr) (((bank) - 1) * 32 + (nr)) + /* use gpiolib dispatchers */ #define gpio_get_value __gpio_get_value #define gpio_set_value __gpio_set_value diff --git a/arch/arm/plat-mxc/include/mach/hardware.h b/arch/arm/plat-mxc/include/mach/hardware.h index ebadf4ac43f..26bb1bab4ae 100644 --- a/arch/arm/plat-mxc/include/mach/hardware.h +++ b/arch/arm/plat-mxc/include/mach/hardware.h @@ -22,13 +22,92 @@ #include <asm/sizes.h> -#define IMX_IO_ADDRESS(addr, module) \ - ((void __force __iomem *) \ - (((unsigned long)((addr) - (module ## _BASE_ADDR)) < module ## _SIZE) ?\ - (addr) - (module ## _BASE_ADDR) + (module ## _BASE_ADDR_VIRT) : 0)) +#ifdef __ASSEMBLER__ +#define IOMEM(addr) (addr) +#else +#define IOMEM(addr) ((void __force __iomem *)(addr)) +#endif + +#define IMX_IO_P2V_MODULE(addr, module) \ + (((addr) - module ## _BASE_ADDR) < module ## _SIZE ? \ + (addr) - (module ## _BASE_ADDR) + (module ## _BASE_ADDR_VIRT) : 0) + +/* + * This is rather complicated for humans and ugly to verify, but for a machine + * it's OK. Still more as it is usually only applied to constants. The upsides + * on using this approach are: + * + * - same mapping on all i.MX machines + * - works for assembler, too + * - no need to nurture #defines for virtual addresses + * + * The downside it, it's hard to verify (but I have a script for that). + * + * Obviously this needs to be injective for each SoC. In general it maps the + * whole address space to [0xf4000000, 0xf5ffffff]. So [0xf6000000,0xfeffffff] + * is free for per-machine use (e.g. KZM_ARM11_01 uses 64MiB there). + * + * It applies the following mappings for the different SoCs: + * + * mx1: + * IO 0x00200000+0x100000 -> 0xf4000000+0x100000 + * mx21: + * AIPI 0x10000000+0x100000 -> 0xf4400000+0x100000 + * SAHB1 0x80000000+0x100000 -> 0xf4000000+0x100000 + * X_MEMC 0xdf000000+0x004000 -> 0xf5f00000+0x004000 + * mx25: + * AIPS1 0x43f00000+0x100000 -> 0xf5300000+0x100000 + * AIPS2 0x53f00000+0x100000 -> 0xf5700000+0x100000 + * AVIC 0x68000000+0x100000 -> 0xf5800000+0x100000 + * mx27: + * AIPI 0x10000000+0x100000 -> 0xf4400000+0x100000 + * SAHB1 0x80000000+0x100000 -> 0xf4000000+0x100000 + * X_MEMC 0xd8000000+0x100000 -> 0xf5c00000+0x100000 + * mx31: + * AIPS1 0x43f00000+0x100000 -> 0xf5300000+0x100000 + * AIPS2 0x53f00000+0x100000 -> 0xf5700000+0x100000 + * AVIC 0x68000000+0x100000 -> 0xf5800000+0x100000 + * X_MEMC 0xb8000000+0x010000 -> 0xf4c00000+0x010000 + * SPBA0 0x50000000+0x100000 -> 0xf5400000+0x100000 + * mx35: + * AIPS1 0x43f00000+0x100000 -> 0xf5300000+0x100000 + * AIPS2 0x53f00000+0x100000 -> 0xf5700000+0x100000 + * AVIC 0x68000000+0x100000 -> 0xf5800000+0x100000 + * X_MEMC 0xb8000000+0x010000 -> 0xf4c00000+0x010000 + * SPBA0 0x50000000+0x100000 -> 0xf5400000+0x100000 + * mx50: + * TZIC 0x0fffc000+0x004000 -> 0xf4bfc000+0x004000 + * SPBA0 0x50000000+0x100000 -> 0xf5400000+0x100000 + * AIPS1 0x53f00000+0x100000 -> 0xf5700000+0x100000 + * AIPS2 0x63f00000+0x100000 -> 0xf5300000+0x100000 + * mx51: + * IRAM 0x1ffe0000+0x020000 -> 0xf4fe0000+0x020000 + * DEBUG 0x60000000+0x100000 -> 0xf5000000+0x100000 + * SPBA0 0x70000000+0x100000 -> 0xf5400000+0x100000 + * AIPS1 0x73f00000+0x100000 -> 0xf5700000+0x100000 + * AIPS2 0x83f00000+0x100000 -> 0xf4300000+0x100000 + * mxc91231: + * L2CC 0x30000000+0x010000 -> 0xf4400000+0x010000 + * X_MEMC 0xb8000000+0x010000 -> 0xf4c00000+0x010000 + * ROMP 0x60000000+0x010000 -> 0xf5000000+0x010000 + * AVIC 0x68000000+0x010000 -> 0xf5800000+0x010000 + * AIPS1 0x43f00000+0x100000 -> 0xf5300000+0x100000 + * SPBA0 0x50000000+0x100000 -> 0xf5400000+0x100000 + * SPBA1 0x52000000+0x100000 -> 0xf5600000+0x100000 + * AIPS2 0x53f00000+0x100000 -> 0xf5700000+0x100000 + */ +#define IMX_IO_P2V(x) ( \ + 0xf4000000 + \ + (((x) & 0x50000000) >> 6) + \ + (((x) & 0x0b000000) >> 4) + \ + (((x) & 0x000fffff))) + +#define IMX_IO_ADDRESS(x) IOMEM(IMX_IO_P2V(x)) #ifdef CONFIG_ARCH_MX5 +#include <mach/mx50.h> #include <mach/mx51.h> +#include <mach/mx53.h> #endif #ifdef CONFIG_ARCH_MX3 @@ -61,4 +140,11 @@ #include <mach/mxc.h> +#define imx_map_entry(soc, name, _type) { \ + .virtual = soc ## _IO_P2V(soc ## _ ## name ## _BASE_ADDR), \ + .pfn = __phys_to_pfn(soc ## _ ## name ## _BASE_ADDR), \ + .length = soc ## _ ## name ## _SIZE, \ + .type = _type, \ +} + #endif /* __ASM_ARCH_MXC_HARDWARE_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/imxfb.h b/arch/arm/plat-mxc/include/mach/imxfb.h index 5263506b7dd..9de8f062ad5 100644 --- a/arch/arm/plat-mxc/include/mach/imxfb.h +++ b/arch/arm/plat-mxc/include/mach/imxfb.h @@ -1,6 +1,8 @@ /* * This structure describes the machine which we are running on. */ +#ifndef __MACH_IMXFB_H__ +#define __MACH_IMXFB_H__ #include <linux/fb.h> @@ -79,3 +81,4 @@ struct imx_fb_platform_data { }; void set_imx_fb_info(struct imx_fb_platform_data *); +#endif /* ifndef __MACH_IMXFB_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx50.h b/arch/arm/plat-mxc/include/mach/iomux-mx50.h new file mode 100644 index 00000000000..058a922ca14 --- /dev/null +++ b/arch/arm/plat-mxc/include/mach/iomux-mx50.h @@ -0,0 +1,977 @@ +/* + * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + */ + +#ifndef __MACH_IOMUX_MX50_H__ +#define __MACH_IOMUX_MX50_H__ + +#include <mach/iomux-v3.h> + +#define MX50_ELCDIF_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_DSE_HIGH) + +#define MX50_SD_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_PKE | PAD_CTL_PUE | \ + PAD_CTL_PUS_47K_UP | PAD_CTL_DSE_HIGH) + +#define MX50_UART_PAD_CTRL (PAD_CTL_DSE_HIGH | PAD_CTL_PKE) + +#define MX50_I2C_PAD_CTRL (PAD_CTL_ODE | PAD_CTL_DSE_HIGH | \ + PAD_CTL_PUS_100K_UP | PAD_CTL_HYS) + +#define MX50_USB_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \ + PAD_CTL_DSE_HIGH | PAD_CTL_PUS_47K_UP) + +#define MX50_FEC_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_PKE | PAD_CTL_PUE | \ + PAD_CTL_PUS_22K_UP | PAD_CTL_ODE | \ + PAD_CTL_DSE_HIGH) + +#define MX50_OWIRE_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_PKE | PAD_CTL_PUE | \ + PAD_CTL_PUS_100K_UP | PAD_CTL_ODE | \ + PAD_CTL_DSE_HIGH | PAD_CTL_SRE_FAST) + +#define MX50_KEYPAD_CTRL (PAD_CTL_HYS | PAD_CTL_PKE | PAD_CTL_PUE | \ + PAD_CTL_PUS_100K_UP | PAD_CTL_DSE_HIGH) + +#define MX50_CSPI_SS_PAD (PAD_CTL_PKE | PAD_CTL_PUE | \ + PAD_CTL_PUS_22K_UP | PAD_CTL_DSE_HIGH) + +#define MX50_PAD_KEY_COL0__KEY_COL0 IOMUX_PAD(0x2CC, 0x20, 0, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_KEY_COL0__GPIO_4_0 IOMUX_PAD(0x2CC, 0x20, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_KEY_COL0__NANDF_CLE IOMUX_PAD(0x2CC, 0x20, 2, 0x0, 0, PAD_CTL_DSE_HIGH) + +#define MX50_PAD_KEY_ROW0__KEY_ROW0 IOMUX_PAD(0x2D0, 0x24, 0, 0x0, 0, MX50_KEYPAD_CTRL) +#define MX50_PAD_KEY_ROW0__GPIO_4_1 IOMUX_PAD(0x2D0, 0x24, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_KEY_ROW0__NANDF_ALE IOMUX_PAD(0x2D0, 0x24, 2, 0x0, 0, PAD_CTL_DSE_HIGH) + +#define MX50_PAD_KEY_COL1__KEY_COL1 IOMUX_PAD(0x2D4, 0x28, 0, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_KEY_COL1__GPIO_4_2 IOMUX_PAD(0x2D4, 0x28, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_KEY_COL1__NANDF_CE0 IOMUX_PAD(0x2D4, 0x28, 2, 0x0, 0, PAD_CTL_DSE_HIGH) + +#define MX50_PAD_KEY_ROW1__KEY_ROW1 IOMUX_PAD(0x2D8, 0x2C, 0, 0x0, 0, MX50_KEYPAD_CTRL) +#define MX50_PAD_KEY_ROW1__GPIO_4_3 IOMUX_PAD(0x2D8, 0x2C, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_KEY_ROW1__NANDF_CE1 IOMUX_PAD(0x2D8, 0x2C, 2, 0x0, 0, PAD_CTL_DSE_HIGH) + +#define MX50_PAD_KEY_COL2__KEY_COL2 IOMUX_PAD(0x2DC, 0x30, 0, 0x0, 0, MX50_KEYPAD_CTRL) +#define MX50_PAD_KEY_COL2__GPIO_4_4 IOMUX_PAD(0x2DC, 0x30, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_KEY_COL2__NANDF_CE2 IOMUX_PAD(0x2DC, 0x30, 2, 0x0, 0, PAD_CTL_DSE_HIGH) + +#define MX50_PAD_KEY_ROW2__KEY_ROW2 IOMUX_PAD(0x2E0, 0x34, 0, 0x0, 0, MX50_KEYPAD_CTRL) +#define MX50_PAD_KEY_ROW2__GPIO_4_5 IOMUX_PAD(0x2E0, 0x34, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_KEY_ROW2__NANDF_CE3 IOMUX_PAD(0x2E0, 0x34, 2, 0x0, 0, PAD_CTL_DSE_HIGH) + +#define MX50_PAD_KEY_COL3__KEY_COL3 IOMUX_PAD(0x2E4, 0x38, 0, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_KEY_COL3__GPIO_4_6 IOMUX_PAD(0x2E4, 0x38, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_KEY_COL3__NANDF_READY IOMUX_PAD(0x2E4, 0x38, 2, 0x7b4, 0, PAD_CTL_PKE | \ + PAD_CTL_PUE | PAD_CTL_PUS_100K_UP) +#define MX50_PAD_KEY_COL3__SDMA_EXT0 IOMUX_PAD(0x2E4, 0x38, 6, 0x7b8, 0, NO_PAD_CTRL) + +#define MX50_PAD_KEY_ROW3__KEY_ROW3 IOMUX_PAD(0x2E8, 0x3C, 0, 0x0, 0, MX50_KEYPAD_CTRL) +#define MX50_PAD_KEY_ROW3__GPIO_4_7 IOMUX_PAD(0x2E8, 0x3C, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_KEY_ROW3__NANDF_DQS IOMUX_PAD(0x2E8, 0x3C, 2, 0x7b0, 0, PAD_CTL_DSE_HIGH) +#define MX50_PAD_KEY_ROW3__SDMA_EXT1 IOMUX_PAD(0x2E8, 0x3C, 6, 0x7bc, 0, NO_PAD_CTRL) + +#define MX50_PAD_I2C1_SCL__I2C1_SCL IOMUX_PAD(0x2EC, 0x40, IOMUX_CONFIG_SION, 0x0, 0, \ + MX50_I2C_PAD_CTRL) +#define MX50_PAD_I2C1_SCL__GPIO_6_18 IOMUX_PAD(0x2EC, 0x40, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_I2C1_SCL__UART2_TXD IOMUX_PAD(0x2EC, 0x40, 2, 0x7cc, 0, MX50_UART_PAD_CTRL) + +#define MX50_PAD_I2C1_SDA__I2C1_SDA IOMUX_PAD(0x2F0, 0x44, IOMUX_CONFIG_SION, 0x0, 0, \ + MX50_I2C_PAD_CTRL) +#define MX50_PAD_I2C1_SDA__GPIO_6_19 IOMUX_PAD(0x2F0, 0x44, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_I2C1_SDA__UART2_RXD IOMUX_PAD(0x2F0, 0x44, 2, 0x7cc, 1, MX50_UART_PAD_CTRL) + +#define MX50_PAD_I2C2_SCL__I2C2_SCL IOMUX_PAD(0x2F4, 0x48, IOMUX_CONFIG_SION, 0x0, 0, \ + MX50_I2C_PAD_CTRL) +#define MX50_PAD_I2C2_SCL__GPIO_6_20 IOMUX_PAD(0x2F4, 0x48, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_I2C2_SCL__UART2_CTS IOMUX_PAD(0x2F4, 0x48, 2, 0x7c8, 0, MX50_UART_PAD_CTRL) +#define MX50_PAD_I2C2_SCL__DCDC_OK IOMUX_PAD(0x2F4, 0x48, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX50_PAD_I2C2_SDA__I2C2_SDA IOMUX_PAD(0x2F8, 0x4C, IOMUX_CONFIG_SION, 0x0, 0, \ + MX50_I2C_PAD_CTRL) +#define MX50_PAD_I2C2_SDA__GPIO_6_21 IOMUX_PAD(0x2F8, 0x4C, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_I2C2_SDA__UART2_RTS IOMUX_PAD(0x2F8, 0x4C, 2, 0x7c8, 1, MX50_UART_PAD_CTRL) +#define MX50_PAD_I2C2_SDA__PWRSTABLE IOMUX_PAD(0x2F8, 0x4C, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX50_PAD_I2C3_SCL__I2C3_SCL IOMUX_PAD(0x2FC, 0x50, IOMUX_CONFIG_SION, 0x0, 0, \ + MX50_I2C_PAD_CTRL) +#define MX50_PAD_I2C3_SCL__GPIO_6_22 IOMUX_PAD(0x2FC, 0x50, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_I2C3_SCL__FEC_MDC IOMUX_PAD(0x2FC, 0x50, 2, 0x0, 0, PAD_CTL_DSE_HIGH) +#define MX50_PAD_I2C3_SCL__PMIC_RDY IOMUX_PAD(0x2FC, 0x50, 3, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_I2C3_SCL__GPT_CAPIN1 IOMUX_PAD(0x2FC, 0x50, 5, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_I2C3_SCL__USBOTG_OC IOMUX_PAD(0x2FC, 0x50, 7, 0x7E8, 0, MX50_USB_PAD_CTRL) + +#define MX50_PAD_I2C3_SDA__I2C3_SDA IOMUX_PAD(0x300, 0x54, IOMUX_CONFIG_SION, 0x0, 0, \ + MX50_I2C_PAD_CTRL) +#define MX50_PAD_I2C3_SDA__GPIO_6_23 IOMUX_PAD(0x300, 0x54, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_I2C3_SDA__FEC_MDIO IOMUX_PAD(0x300, 0x54, 2, 0x774, 0, MX50_FEC_PAD_CTRL) +#define MX50_PAD_I2C3_SDA__PWRFAIL_INT IOMUX_PAD(0x300, 0x54, 3, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_I2C3_SDA__ALARM_DEB IOMUX_PAD(0x300, 0x54, 4, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_I2C3_SDA__GPT_CAPIN1 IOMUX_PAD(0x300, 0x54, 5, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_I2C3_SDA__USBOTG_PWR IOMUX_PAD(0x300, 0x54, 7, 0x0, 0, \ + PAD_CTL_PKE | PAD_CTL_DSE_HIGH) + +#define MX50_PAD_PWM1__PWM1_PWMO IOMUX_PAD(0x304, 0x58, 0, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_PWM1__GPIO_6_24 IOMUX_PAD(0x304, 0x58, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_PWM1__USBOTG_OC IOMUX_PAD(0x304, 0x58, 2, 0x7E8, 1, MX50_USB_PAD_CTRL) +#define MX50_PAD_PWM1__GPT_CMPOUT1 IOMUX_PAD(0x304, 0x58, 5, 0x0, 0, NO_PAD_CTRL) + +#define MX50_PAD_PWM2__PWM2_PWMO IOMUX_PAD(0x308, 0x5C, 0, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_PWM2__GPIO_6_25 IOMUX_PAD(0x308, 0x5C, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_PWM2__USBOTG_PWR IOMUX_PAD(0x308, 0x5C, 2, 0x0, 0, \ + PAD_CTL_PKE | PAD_CTL_DSE_HIGH) +#define MX50_PAD_PWM2__DCDC_PWM IOMUX_PAD(0x308, 0x5C, 4, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_PWM2__GPT_CMPOUT2 IOMUX_PAD(0x308, 0x5C, 5, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_PWM2__ANY_PU_RST IOMUX_PAD(0x308, 0x5C, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX50_PAD_OWIRE__OWIRE IOMUX_PAD(0x30C, 0x60, 0, 0x0, 0, MX50_OWIRE_PAD_CTRL) +#define MX50_PAD_OWIRE__GPIO_6_26 IOMUX_PAD(0x30C, 0x60, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_OWIRE__USBH1_OC IOMUX_PAD(0x30C, 0x60, 2, 0x0, 0, MX50_USB_PAD_CTRL) +#define MX50_PAD_OWIRE__SSI_EXT1_CLK IOMUX_PAD(0x30C, 0x60, 3, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_OWIRE__EPDC_PWRIRQ IOMUX_PAD(0x30C, 0x60, 4, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_OWIRE__GPT_CMPOUT3 IOMUX_PAD(0x30C, 0x60, 5, 0x0, 0, NO_PAD_CTRL) + +#define MX50_PAD_EPITO__EPITO IOMUX_PAD(0x310, 0x64, 0, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EPITO__GPIO_6_27 IOMUX_PAD(0x310, 0x64, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EPITO__USBH1_PWR IOMUX_PAD(0x310, 0x64, 2, 0x0, 0, \ + PAD_CTL_PKE | PAD_CTL_DSE_HIGH) +#define MX50_PAD_EPITO__SSI_EXT2_CLK IOMUX_PAD(0x310, 0x64, 3, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EPITO__TOG_EN IOMUX_PAD(0x310, 0x64, 4, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EPITO__GPT_CLKIN IOMUX_PAD(0x310, 0x64, 5, 0x0, 0, NO_PAD_CTRL) + +#define MX50_PAD_WDOG__WDOG IOMUX_PAD(0x314, 0x68, 0, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_WDOG__GPIO_6_28 IOMUX_PAD(0x314, 0x68, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_WDOG__WDOG_RST IOMUX_PAD(0x314, 0x68, 2, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_WDOG__XTAL32K IOMUX_PAD(0x314, 0x68, 6, 0x0, 0, NO_PAD_CTRL) + +#define MX50_PAD_SSI_TXFS__SSI_TXFS IOMUX_PAD(0x318, 0x6C, 0, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_SSI_TXFS__GPIO_6_0 IOMUX_PAD(0x318, 0x6C, 1, 0x0, 0, NO_PAD_CTRL) + +#define MX50_PAD_SSI_TXC__SSI_TXC IOMUX_PAD(0x31C, 0x70, 0, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_SSI_TXC__GPIO_6_1 IOMUX_PAD(0x31C, 0x70, 1, 0x0, 0, NO_PAD_CTRL) + +#define MX50_PAD_SSI_TXD__SSI_TXD IOMUX_PAD(0x320, 0x74, 0, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_SSI_TXD__GPIO_6_2 IOMUX_PAD(0x320, 0x74, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_SSI_TXD__CSPI_RDY IOMUX_PAD(0x320, 0x74, 4, 0x6e8, 0, NO_PAD_CTRL) + +#define MX50_PAD_SSI_RXD__SSI_RXD IOMUX_PAD(0x324, 0x78, 0, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_SSI_RXD__GPIO_6_3 IOMUX_PAD(0x324, 0x78, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_SSI_RXD__CSPI_SS3 IOMUX_PAD(0x324, 0x78, 4, 0x6f4, 0, MX50_CSPI_SS_PAD) + +#define MX50_PAD_SSI_RXFS__AUD3_RXFS IOMUX_PAD(0x328, 0x7C, 0, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_SSI_RXFS__GPIO_6_4 IOMUX_PAD(0x328, 0x7C, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_SSI_RXFS__UART5_TXD IOMUX_PAD(0x328, 0x7C, 2, 0x7e4, 0, MX50_UART_PAD_CTRL) +#define MX50_PAD_SSI_RXFS__WEIM_D6 IOMUX_PAD(0x328, 0x7C, 3, 0x804, 0, NO_PAD_CTRL) +#define MX50_PAD_SSI_RXFS__CSPI_SS2 IOMUX_PAD(0x328, 0x7C, 4, 0x6f0, 0, MX50_CSPI_SS_PAD) +#define MX50_PAD_SSI_RXFS__FEC_COL IOMUX_PAD(0x328, 0x7C, 5, 0x770, 0, PAD_CTL_DSE_HIGH) +#define MX50_PAD_SSI_RXFS__FEC_MDC IOMUX_PAD(0x328, 0x7C, 6, 0x0, 0, PAD_CTL_DSE_HIGH) + +#define MX50_PAD_SSI_RXC__AUD3_RXC IOMUX_PAD(0x32C, 0x80, 0, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_SSI_RXC__GPIO_6_5 IOMUX_PAD(0x32C, 0x80, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_SSI_RXC__UART5_RXD IOMUX_PAD(0x32C, 0x80, 2, 0x7e4, 1, MX50_UART_PAD_CTRL) +#define MX50_PAD_SSI_RXC__WEIM_D7 IOMUX_PAD(0x32C, 0x80, 3, 0x808, 0, NO_PAD_CTRL) +#define MX50_PAD_SSI_RXC__CSPI_SS1 IOMUX_PAD(0x32C, 0x80, 4, 0x6ec, 0, MX50_CSPI_SS_PAD) +#define MX50_PAD_SSI_RXC__FEC_RX_CLK IOMUX_PAD(0x32C, 0x80, 5, 0x780, 0, NO_PAD_CTRL) +#define MX50_PAD_SSI_RXC__FEC_MDIO IOMUX_PAD(0x32C, 0x80, 6, 0x774, 1, MX50_FEC_PAD_CTRL) + +#define MX50_PAD_UART1_TXD__UART1_TXD IOMUX_PAD(0x330, 0x84, 0, 0x7c4, 0, MX50_UART_PAD_CTRL) +#define MX50_PAD_UART1_TXD__GPIO_6_6 IOMUX_PAD(0x330, 0x84, 1, 0x0, 0, NO_PAD_CTRL) + +#define MX50_PAD_UART1_RXD__UART1_RXD IOMUX_PAD(0x334, 0x88, 0, 0x7c4, 1, MX50_UART_PAD_CTRL) +#define MX50_PAD_UART1_RXD__GPIO_6_7 IOMUX_PAD(0x334, 0x88, 1, 0x0, 0, NO_PAD_CTRL) + +#define MX50_PAD_UART1_CTS__UART1_CTS IOMUX_PAD(0x338, 0x8C, 0, 0x7c0, 0, MX50_UART_PAD_CTRL) +#define MX50_PAD_UART1_CTS__GPIO_6_8 IOMUX_PAD(0x338, 0x8C, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_UART1_CTS__UART5_TXD IOMUX_PAD(0x338, 0x8C, 2, 0x7e4, 2, MX50_UART_PAD_CTRL) +#define MX50_PAD_UART1_CTS__SD4_D4 IOMUX_PAD(0x338, 0x8C, 4, 0x760, 0, MX50_SD_PAD_CTRL) +#define MX50_PAD_UART1_CTS__SD4_CMD IOMUX_PAD(0x338, 0x8C, 5, 0x74c, 0, MX50_SD_PAD_CTRL) + +#define MX50_PAD_UART1_RTS__UART1_RTS IOMUX_PAD(0x33C, 0x90, 0, 0x7c0, 1, MX50_UART_PAD_CTRL) +#define MX50_PAD_UART1_RTS__GPIO_6_9 IOMUX_PAD(0x33C, 0x90, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_UART1_RTS__UART5_RXD IOMUX_PAD(0x33C, 0x90, 2, 0x7e4, 3, MX50_UART_PAD_CTRL) +#define MX50_PAD_UART1_RTS__SD4_D5 IOMUX_PAD(0x33C, 0x90, 4, 0x0, 1, MX50_SD_PAD_CTRL) +#define MX50_PAD_UART1_RTS__SD4_CLK IOMUX_PAD(0x33C, 0x90, 5, 0x0, 1, MX50_SD_PAD_CTRL) + +#define MX50_PAD_UART2_TXD__UART2_TXD IOMUX_PAD(0x340, 0x94, 0, 0x7cc, 2, MX50_UART_PAD_CTRL) +#define MX50_PAD_UART2_TXD__GPIO_6_10 IOMUX_PAD(0x340, 0x94, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_UART2_TXD__SD4_D6 IOMUX_PAD(0x340, 0x94, 4, 0x768, 0, MX50_SD_PAD_CTRL) +#define MX50_PAD_UART2_TXD__SD4_D4 IOMUX_PAD(0x340, 0x94, 5, 0x760, 1, MX50_SD_PAD_CTRL) + +#define MX50_PAD_UART2_RXD__UART2_RXD IOMUX_PAD(0x344, 0x98, 0, 0x7cc, 3, MX50_UART_PAD_CTRL) +#define MX50_PAD_UART2_RXD__GPIO_6_11 IOMUX_PAD(0x344, 0x98, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_UART2_RXD__SD4_D7 IOMUX_PAD(0x344, 0x98, 4, 0x76c, 0, MX50_SD_PAD_CTRL) +#define MX50_PAD_UART2_RXD__SD4_D5 IOMUX_PAD(0x344, 0x98, 5, 0x764, 1, MX50_SD_PAD_CTRL) + +#define MX50_PAD_UART2_CTS__UART2_CTS IOMUX_PAD(0x348, 0x9C, 0, 0x7c8, 2, MX50_UART_PAD_CTRL) +#define MX50_PAD_UART2_CTS__GPIO_6_12 IOMUX_PAD(0x348, 0x9C, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_UART2_CTS__SD4_CMD IOMUX_PAD(0x348, 0x9C, 4, 0x74c, 1, MX50_SD_PAD_CTRL) +#define MX50_PAD_UART2_CTS__SD4_D6 IOMUX_PAD(0x348, 0x9C, 5, 0x768, 1, MX50_SD_PAD_CTRL) + +#define MX50_PAD_UART2_RTS__UART2_RTS IOMUX_PAD(0x34C, 0xA0, 0, 0x7c8, 3, MX50_UART_PAD_CTRL) +#define MX50_PAD_UART2_RTS__GPIO_6_13 IOMUX_PAD(0x34C, 0xA0, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_UART2_RTS__SD4_CLK IOMUX_PAD(0x34C, 0xA0, 4, 0x748, 1, MX50_SD_PAD_CTRL) +#define MX50_PAD_UART2_RTS__SD4_D7 IOMUX_PAD(0x34C, 0xA0, 5, 0x76c, 1, MX50_SD_PAD_CTRL) + +#define MX50_PAD_UART3_TXD__UART3_TXD IOMUX_PAD(0x350, 0xA4, 0, 0x7d4, 0, MX50_UART_PAD_CTRL) +#define MX50_PAD_UART3_TXD__GPIO_6_14 IOMUX_PAD(0x350, 0xA4, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_UART3_TXD__SD1_D4 IOMUX_PAD(0x350, 0xA4, 3, 0x0, 0, MX50_SD_PAD_CTRL) +#define MX50_PAD_UART3_TXD__SD4_D0 IOMUX_PAD(0x350, 0xA4, 4, 0x750, 0, MX50_SD_PAD_CTRL) +#define MX50_PAD_UART3_TXD__SD2_WP IOMUX_PAD(0x350, 0xA4, 5, 0x744, 0, MX50_SD_PAD_CTRL) +#define MX50_PAD_UART3_TXD__WEIM_D12 IOMUX_PAD(0x350, 0xA4, 6, 0x81c, 0, NO_PAD_CTRL) + +#define MX50_PAD_UART3_RXD__UART3_RXD IOMUX_PAD(0x354, 0xA8, 0, 0x7d4, 1, MX50_UART_PAD_CTRL) +#define MX50_PAD_UART3_RXD__GPIO_6_15 IOMUX_PAD(0x354, 0xA8, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_UART3_RXD__SD1_D5 IOMUX_PAD(0x354, 0xA8, 3, 0x0, 0, MX50_SD_PAD_CTRL) +#define MX50_PAD_UART3_RXD__SD4_D1 IOMUX_PAD(0x354, 0xA8, 4, 0x754, 0, MX50_SD_PAD_CTRL) +#define MX50_PAD_UART3_RXD__SD2_CD IOMUX_PAD(0x354, 0xA8, 5, 0x740, 0, MX50_SD_PAD_CTRL) +#define MX50_PAD_UART3_RXD__WEIM_D13 IOMUX_PAD(0x354, 0xA8, 6, 0x820, 0, NO_PAD_CTRL) + +#define MX50_PAD_UART4_TXD__UART4_TXD IOMUX_PAD(0x358, 0xAC, 0, 0x7dc, 0, MX50_UART_PAD_CTRL) +#define MX50_PAD_UART4_TXD__GPIO_6_16 IOMUX_PAD(0x358, 0xAC, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_UART4_TXD__UART3_CTS IOMUX_PAD(0x358, 0xAC, 2, 0x7d0, 0, MX50_UART_PAD_CTRL) +#define MX50_PAD_UART4_TXD__SD1_D6 IOMUX_PAD(0x358, 0xAC, 3, 0x0, 0, MX50_SD_PAD_CTRL) +#define MX50_PAD_UART4_TXD__SD4_D2 IOMUX_PAD(0x358, 0xAC, 4, 0x758, 0, MX50_SD_PAD_CTRL) +#define MX50_PAD_UART4_TXD__SD2_LCTL IOMUX_PAD(0x358, 0xAC, 5, 0x0, 0, MX50_SD_PAD_CTRL) +#define MX50_PAD_UART4_TXD__WEIM_D14 IOMUX_PAD(0x358, 0xAC, 6, 0x824, 0, NO_PAD_CTRL) + +#define MX50_PAD_UART4_RXD__UART4_RXD IOMUX_PAD(0x35C, 0xB0, 0, 0x7dc, 1, MX50_UART_PAD_CTRL) +#define MX50_PAD_UART4_RXD__GPIO_6_17 IOMUX_PAD(0x35C, 0xB0, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_UART4_RXD__UART3_RTS IOMUX_PAD(0x35C, 0xB0, 2, 0x7d0, 1, MX50_UART_PAD_CTRL) +#define MX50_PAD_UART4_RXD__SD1_D7 IOMUX_PAD(0x35C, 0xB0, 3, 0x0, 0, MX50_SD_PAD_CTRL) +#define MX50_PAD_UART4_RXD__SD4_D3 IOMUX_PAD(0x35C, 0xB0, 4, 0x75c, 0, MX50_SD_PAD_CTRL) +#define MX50_PAD_UART4_RXD__SD1_LCTL IOMUX_PAD(0x35C, 0xB0, 5, 0x0, 0, MX50_SD_PAD_CTRL) +#define MX50_PAD_UART4_RXD__WEIM_D15 IOMUX_PAD(0x35C, 0xB0, 6, 0x828, 0, NO_PAD_CTRL) + +#define MX50_PAD_CSPI_SCLK__CSPI_SCLK IOMUX_PAD(0x360, 0xB4, 0, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_CSPI_SCLK__GPIO_4_8 IOMUX_PAD(0x360, 0xB4, 1, 0x0, 0, NO_PAD_CTRL) + +#define MX50_PAD_CSPI_MOSI__CSPI_MOSI IOMUX_PAD(0x364, 0xB8, 0, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_CSPI_MOSI__GPIO_4_9 IOMUX_PAD(0x364, 0xB8, 1, 0x0, 0, NO_PAD_CTRL) + +#define MX50_PAD_CSPI_MISO__CSPI_MISO IOMUX_PAD(0x368, 0xBC, 0, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_CSPI_MISO__GPIO_4_10 IOMUX_PAD(0x368, 0xBC, 1, 0x0, 0, NO_PAD_CTRL) + +#define MX50_PAD_CSPI_SS0__CSPI_SS0 IOMUX_PAD(0x36C, 0xC0, 0, 0x0, 0, MX50_CSPI_SS_PAD) +#define MX50_PAD_CSPI_SS0__GPIO_4_11 IOMUX_PAD(0x36C, 0xC0, 1, 0x0, 0, NO_PAD_CTRL) + +#define MX50_PAD_ECSPI1_SCLK__ECSPI1_SCLK IOMUX_PAD(0x370, 0xC4, 0, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_ECSPI1_SCLK__GPIO_4_12 IOMUX_PAD(0x370, 0xC4, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_ECSPI1_SCLK__CSPI_RDY IOMUX_PAD(0x370, 0xC4, 2, 0x6e8, 1, NO_PAD_CTRL) +#define MX50_PAD_ECSPI1_SCLK__ECSPI2_RDY IOMUX_PAD(0x370, 0xC4, 3, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_ECSPI1_SCLK__UART3_RTS IOMUX_PAD(0x370, 0xC4, 4, 0x7d0, 2, MX50_UART_PAD_CTRL) +#define MX50_PAD_ECSPI1_SCLK__EPDC_SDCE6 IOMUX_PAD(0x370, 0xC4, 5, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_ECSPI1_SCLK__WEIM_D8 IOMUX_PAD(0x370, 0xC4, 7, 0x80c, 0, NO_PAD_CTRL) + +#define MX50_PAD_ECSPI1_MOSI__ECSPI1_MOSI IOMUX_PAD(0x374, 0xC8, 0, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_ECSPI1_MOSI__GPIO_4_13 IOMUX_PAD(0x374, 0xC8, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_ECSPI1_MOSI__CSPI_SS1 IOMUX_PAD(0x374, 0xC8, 2, 0x6ec, 1, MX50_CSPI_SS_PAD) +#define MX50_PAD_ECSPI1_MOSI__ECSPI2_SS1 IOMUX_PAD(0x374, 0xC8, 3, 0x0, 0, MX50_CSPI_SS_PAD) +#define MX50_PAD_ECSPI1_MOSI__UART3_CTS IOMUX_PAD(0x374, 0xC8, 4, 0x7d0, 3, MX50_UART_PAD_CTRL) +#define MX50_PAD_ECSPI1_MOSI__EPDC_SDCE7 IOMUX_PAD(0x374, 0xC8, 5, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_ECSPI1_MOSI__WEIM_D9 IOMUX_PAD(0x374, 0xC8, 7, 0x810, 0, NO_PAD_CTRL) + +#define MX50_PAD_ECSPI1_MISO__ECSPI1_MISO IOMUX_PAD(0x378, 0xCC, 0, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_ECSPI1_MISO__GPIO_4_14 IOMUX_PAD(0x378, 0xCC, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_ECSPI1_MISO__CSPI_SS2 IOMUX_PAD(0x378, 0xCC, 2, 0x6f0, 1, MX50_CSPI_SS_PAD) +#define MX50_PAD_ECSPI1_MISO__ECSPI2_SS2 IOMUX_PAD(0x378, 0xCC, 3, 0x0, 0, MX50_CSPI_SS_PAD) +#define MX50_PAD_ECSPI1_MISO__UART4_RTS IOMUX_PAD(0x378, 0xCC, 4, 0x7d8, 0, MX50_UART_PAD_CTRL) +#define MX50_PAD_ECSPI1_MISO__EPDC_SDCE8 IOMUX_PAD(0x378, 0xCC, 5, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_ECSPI1_MISO__WEIM_D10 IOMUX_PAD(0x378, 0xCC, 7, 0x814, 0, NO_PAD_CTRL) + +#define MX50_PAD_ECSPI1_SS0__ECSPI1_SS0 IOMUX_PAD(0x37C, 0xD0, 0, 0x0, 0, MX50_CSPI_SS_PAD) +#define MX50_PAD_ECSPI1_SS0__GPIO_4_15 IOMUX_PAD(0x37C, 0xD0, 1, 0x0, 0, PAD_CTL_PUS_100K_UP) +#define MX50_PAD_ECSPI1_SS0__CSPI_SS3 IOMUX_PAD(0x37C, 0xD0, 2, 0x6f4, 1, MX50_CSPI_SS_PAD) +#define MX50_PAD_ECSPI1_SS0__ECSPI2_SS3 IOMUX_PAD(0x37C, 0xD0, 3, 0x0, 0, MX50_CSPI_SS_PAD) +#define MX50_PAD_ECSPI1_SS0__UART4_CTS IOMUX_PAD(0x37C, 0xD0, 4, 0x7d8, 1, MX50_UART_PAD_CTRL) +#define MX50_PAD_ECSPI1_SS0__EPDC_SDCE9 IOMUX_PAD(0x37C, 0xD0, 5, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_ECSPI1_SS0__WEIM_D11 IOMUX_PAD(0x37C, 0xD0, 7, 0x818, 0, NO_PAD_CTRL) + +#define MX50_PAD_ECSPI2_SCLK__ECSPI2_SCLK IOMUX_PAD(0x380, 0xD4, 0, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_ECSPI2_SCLK__GPIO_4_16 IOMUX_PAD(0x380, 0xD4, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_ECSPI2_SCLK__ELCDIF_WR IOMUX_PAD(0x380, 0xD4, 2, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_ECSPI2_SCLK__ECSPI1_RDY IOMUX_PAD(0x380, 0xD4, 3, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_ECSPI2_SCLK__UART5_RTS IOMUX_PAD(0x380, 0xD4, 4, 0x7e0, 0, MX50_UART_PAD_CTRL) +#define MX50_PAD_ECSPI2_SCLK__ELCDIF_DOTCLK IOMUX_PAD(0x380, 0xD4, 5, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_ECSPI2_SCLK__NANDF_CEN4 IOMUX_PAD(0x380, 0xD4, 6, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_ECSPI2_SCLK__WEIM_D8 IOMUX_PAD(0x380, 0xD4, 7, 0x80c, 1, NO_PAD_CTRL) + +#define MX50_PAD_ECSPI2_MOSI__ECSPI2_MOSI IOMUX_PAD(0x384, 0xD8, 0, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_ECSPI2_MOSI__GPIO_4_17 IOMUX_PAD(0x384, 0xD8, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_ECSPI2_MOSI__ELCDIF_RD IOMUX_PAD(0x384, 0xD8, 2, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_ECSPI2_MOSI__ECSPI1_SS1 IOMUX_PAD(0x384, 0xD8, 3, 0x0, 0, MX50_CSPI_SS_PAD) +#define MX50_PAD_ECSPI2_MOSI__UART5_CTS IOMUX_PAD(0x384, 0xD8, 4, 0x7e0, 1, MX50_UART_PAD_CTRL) +#define MX50_PAD_ECSPI2_MOSI__ELCDIF_EN IOMUX_PAD(0x384, 0xD8, 5, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_ECSPI2_MOSI__NANDF_CEN5 IOMUX_PAD(0x384, 0xD8, 6, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_ECSPI2_MOSI__WEIM_D9 IOMUX_PAD(0x384, 0xD8, 7, 0x810, 1, NO_PAD_CTRL) + +#define MX50_PAD_ECSPI2_MISO__ECSPI2_MISO IOMUX_PAD(0x388, 0xDC, 0, 0x73c, 0, NO_PAD_CTRL) +#define MX50_PAD_ECSPI2_MISO__GPIO_4_18 IOMUX_PAD(0x388, 0xDC, 1, 0x0, 0, PAD_CTL_PUS_100K_UP) +#define MX50_PAD_ECSPI2_MISO__ELCDIF_RS IOMUX_PAD(0x388, 0xDC, 2, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_ECSPI2_MISO__ECSPI1_SS2 IOMUX_PAD(0x388, 0xDC, 3, 0x0, 0, MX50_CSPI_SS_PAD) +#define MX50_PAD_ECSPI2_MISO__UART5_TXD IOMUX_PAD(0x388, 0xDC, 4, 0x7e4, 4, MX50_UART_PAD_CTRL) +#define MX50_PAD_ECSPI2_MISO__ELCDIF_VSYNC IOMUX_PAD(0x388, 0xDC, 5, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_ECSPI2_MISO__NANDF_CEN6 IOMUX_PAD(0x388, 0xDC, 6, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_ECSPI2_MISO__WEIM_D10 IOMUX_PAD(0x388, 0xDC, 7, 0x814, 1, NO_PAD_CTRL) + +#define MX50_PAD_ECSPI2_SS0__ECSPI2_SS0 IOMUX_PAD(0x38C, 0xE0, 0, 0x0, 0, MX50_CSPI_SS_PAD) +#define MX50_PAD_ECSPI2_SS0__GPIO_4_19 IOMUX_PAD(0x38C, 0xE0, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_ECSPI2_SS0__ELCDIF_CS IOMUX_PAD(0x38C, 0xE0, 2, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_ECSPI2_SS0__ECSPI1_SS3 IOMUX_PAD(0x38C, 0xE0, 3, 0x0, 0, MX50_CSPI_SS_PAD) +#define MX50_PAD_ECSPI2_SS0__UART5_RXD IOMUX_PAD(0x38C, 0xE0, 4, 0x7e4, 5, MX50_UART_PAD_CTRL) +#define MX50_PAD_ECSPI2_SS0__ELCDIF_HSYNC IOMUX_PAD(0x38C, 0xE0, 5, 0x6f8, 0, NO_PAD_CTRL) +#define MX50_PAD_ECSPI2_SS0__NANDF_CEN7 IOMUX_PAD(0x38C, 0xE0, 6, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_ECSPI2_SS0__WEIM_D11 IOMUX_PAD(0x38C, 0xE0, 7, 0x818, 1, NO_PAD_CTRL) + +#define MX50_PAD_SD1_CLK__SD1_CLK IOMUX_PAD(0x390, 0xE4, IOMUX_CONFIG_SION, 0x0, 0, MX50_SD_PAD_CTRL) +#define MX50_PAD_SD1_CLK__GPIO_5_0 IOMUX_PAD(0x390, 0xE4, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_SD1_CLK__CLKO IOMUX_PAD(0x390, 0xE4, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX50_PAD_SD1_CMD__SD1_CMD IOMUX_PAD(0x394, 0xE8, IOMUX_CONFIG_SION, 0x0, 0, MX50_SD_PAD_CTRL) +#define MX50_PAD_SD1_CMD__GPIO_5_1 IOMUX_PAD(0x394, 0xE8, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_SD1_CMD__CLKO2 IOMUX_PAD(0x394, 0xE8, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX50_PAD_SD1_D0__SD1_D0 IOMUX_PAD(0x398, 0xEC, 0, 0x0, 0, MX50_SD_PAD_CTRL) +#define MX50_PAD_SD1_D0__GPIO_5_2 IOMUX_PAD(0x398, 0xEC, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_SD1_D0__PLL1_BYP IOMUX_PAD(0x398, 0xEC, 7, 0x6dc, 0, NO_PAD_CTRL) + +#define MX50_PAD_SD1_D1__SD1_D1 IOMUX_PAD(0x39C, 0xF0, 0, 0x0, 0, MX50_SD_PAD_CTRL) +#define MX50_PAD_SD1_D1__GPIO_5_3 IOMUX_PAD(0x39C, 0xF0, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_SD1_D1__PLL2_BYP IOMUX_PAD(0x39C, 0xF0, 7, 0x6e0, 0, NO_PAD_CTRL) + +#define MX50_PAD_SD1_D2__SD1_D2 IOMUX_PAD(0x3A0, 0xF4, 0, 0x0, 0, MX50_SD_PAD_CTRL) +#define MX50_PAD_SD1_D2__GPIO_5_4 IOMUX_PAD(0x3A0, 0xF4, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_SD1_D2__PLL3_BYP IOMUX_PAD(0x3A0, 0xF4, 7, 0x6e4, 0, NO_PAD_CTRL) + +#define MX50_PAD_SD1_D3__SD1_D3 IOMUX_PAD(0x3A4, 0xF8, 0, 0x0, 0, MX50_SD_PAD_CTRL) +#define MX50_PAD_SD1_D3__GPIO_5_5 IOMUX_PAD(0x3A4, 0xF8, 1, 0x0, 0, NO_PAD_CTRL) + +#define MX50_PAD_SD2_CLK__SD2_CLK IOMUX_PAD(0x3A8, 0xFC, IOMUX_CONFIG_SION, 0x0, 0, MX50_SD_PAD_CTRL) +#define MX50_PAD_SD2_CLK__GPIO_5_6 IOMUX_PAD(0x3A8, 0xFC, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_SD2_CLK__MSHC_SCLK IOMUX_PAD(0x3A8, 0xFC, 2, 0x0, 0, MX50_SD_PAD_CTRL) + +#define MX50_PAD_SD2_CMD__SD2_CMD IOMUX_PAD(0x3AC, 0x100, IOMUX_CONFIG_SION, 0x0, 0, MX50_SD_PAD_CTRL) +#define MX50_PAD_SD2_CMD__GPIO_5_7 IOMUX_PAD(0x3AC, 0x100, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_SD2_CMD__MSHC_BS IOMUX_PAD(0x3AC, 0x100, 2, 0x0, 0, MX50_SD_PAD_CTRL) + +#define MX50_PAD_SD2_D0__SD2_D0 IOMUX_PAD(0x3B0, 0x104, 0, 0x0, 0, MX50_SD_PAD_CTRL) +#define MX50_PAD_SD2_D0__GPIO_5_8 IOMUX_PAD(0x3B0, 0x104, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_SD2_D0__MSHC_D0 IOMUX_PAD(0x3B0, 0x104, 2, 0x0, 0, MX50_SD_PAD_CTRL) +#define MX50_PAD_SD2_D0__KEY_COL4 IOMUX_PAD(0x3B0, 0x104, 3, 0x790, 0, NO_PAD_CTRL) + +#define MX50_PAD_SD2_D1__SD2_D1 IOMUX_PAD(0x3B4, 0x108, 0, 0x0, 0, MX50_SD_PAD_CTRL) +#define MX50_PAD_SD2_D1__GPIO_5_9 IOMUX_PAD(0x3B4, 0x108, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_SD2_D1__MSHC_D1 IOMUX_PAD(0x3B4, 0x108, 2, 0x0, 0, MX50_SD_PAD_CTRL) +#define MX50_PAD_SD2_D1__KEY_ROW4 IOMUX_PAD(0x3B4, 0x108, 3, 0x7a0, 0, NO_PAD_CTRL) + +#define MX50_PAD_SD2_D2__SD2_D2 IOMUX_PAD(0x3B8, 0x10C, 0, 0x0, 0, MX50_SD_PAD_CTRL) +#define MX50_PAD_SD2_D2__GPIO_5_10 IOMUX_PAD(0x3B8, 0x10C, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_SD2_D2__MSHC_D2 IOMUX_PAD(0x3B8, 0x10C, 2, 0x0, 0, MX50_SD_PAD_CTRL) +#define MX50_PAD_SD2_D2__KEY_COL5 IOMUX_PAD(0x3B8, 0x10C, 3, 0x794, 0, NO_PAD_CTRL) + +#define MX50_PAD_SD2_D3__SD2_D3 IOMUX_PAD(0x3BC, 0x110, 0, 0x0, 0, MX50_SD_PAD_CTRL) +#define MX50_PAD_SD2_D3__GPIO_5_11 IOMUX_PAD(0x3BC, 0x110, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_SD2_D3__MSHC_D3 IOMUX_PAD(0x3BC, 0x110, 2, 0x0, 0, MX50_SD_PAD_CTRL) +#define MX50_PAD_SD2_D3__KEY_ROW5 IOMUX_PAD(0x3BC, 0x110, 3, 0x7a4, 0, NO_PAD_CTRL) + +#define MX50_PAD_SD2_D4__SD2_D4 IOMUX_PAD(0x3C0, 0x114, 0, 0x0, 0, MX50_SD_PAD_CTRL) +#define MX50_PAD_SD2_D4__GPIO_5_12 IOMUX_PAD(0x3C0, 0x114, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_SD2_D4__AUD4_RXFS IOMUX_PAD(0x3C0, 0x114, 2, 0x6d0, 0, NO_PAD_CTRL) +#define MX50_PAD_SD2_D4__KEY_COL6 IOMUX_PAD(0x3C0, 0x114, 3, 0x798, 0, NO_PAD_CTRL) +#define MX50_PAD_SD2_D4__WEIM_D0 IOMUX_PAD(0x3C0, 0x114, 4, 0x7ec, 0, NO_PAD_CTRL) +#define MX50_PAD_SD2_D4__CCM_OUT0 IOMUX_PAD(0x3C0, 0x114, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX50_PAD_SD2_D5__SD2_D5 IOMUX_PAD(0x3C4, 0x118, 0, 0x0, 0, MX50_SD_PAD_CTRL) +#define MX50_PAD_SD2_D5__GPIO_5_13 IOMUX_PAD(0x3C4, 0x118, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_SD2_D5__AUD4_RXC IOMUX_PAD(0x3C4, 0x118, 2, 0x6cc, 0, NO_PAD_CTRL) +#define MX50_PAD_SD2_D5__KEY_ROW6 IOMUX_PAD(0x3C4, 0x118, 3, 0x7a8, 0, NO_PAD_CTRL) +#define MX50_PAD_SD2_D5__WEIM_D1 IOMUX_PAD(0x3C4, 0x118, 4, 0x7f0, 0, NO_PAD_CTRL) +#define MX50_PAD_SD2_D5__CCM_OUT1 IOMUX_PAD(0x3C4, 0x118, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX50_PAD_SD2_D6__SD2_D6 IOMUX_PAD(0x3C8, 0x11C, 0, 0x0, 0, MX50_SD_PAD_CTRL) +#define MX50_PAD_SD2_D6__GPIO_5_14 IOMUX_PAD(0x3C8, 0x11C, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_SD2_D6__AUD4_RXD IOMUX_PAD(0x3C8, 0x11C, 2, 0x6c4, 0, NO_PAD_CTRL) +#define MX50_PAD_SD2_D6__KEY_COL7 IOMUX_PAD(0x3C8, 0x11C, 3, 0x79c, 0, NO_PAD_CTRL) +#define MX50_PAD_SD2_D6__WEIM_D2 IOMUX_PAD(0x3C8, 0x11C, 4, 0x7f4, 0, NO_PAD_CTRL) +#define MX50_PAD_SD2_D6__CCM_OUT2 IOMUX_PAD(0x3C8, 0x11C, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX50_PAD_SD2_D7__SD2_D7 IOMUX_PAD(0x3CC, 0x120, 0, 0x0, 0, MX50_SD_PAD_CTRL) +#define MX50_PAD_SD2_D7__GPIO_5_15 IOMUX_PAD(0x3CC, 0x120, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_SD2_D7__AUD4_TXFS IOMUX_PAD(0x3CC, 0x120, 2, 0x6d8, 0, NO_PAD_CTRL) +#define MX50_PAD_SD2_D7__KEY_ROW7 IOMUX_PAD(0x3CC, 0x120, 3, 0x7ac, 0, NO_PAD_CTRL) +#define MX50_PAD_SD2_D7__WEIM_D3 IOMUX_PAD(0x3CC, 0x120, 4, 0x7f8, 0, NO_PAD_CTRL) +#define MX50_PAD_SD2_D7__CCM_STOP IOMUX_PAD(0x3CC, 0x120, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX50_PAD_SD2_WP__SD2_WP IOMUX_PAD(0x3D0, 0x124, 0, 0x744, 1, MX50_SD_PAD_CTRL) +#define MX50_PAD_SD2_WP__GPIO_5_16 IOMUX_PAD(0x3D0, 0x124, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_SD2_WP__AUD4_TXD IOMUX_PAD(0x3D0, 0x124, 2, 0x6c8, 0, NO_PAD_CTRL) +#define MX50_PAD_SD2_WP__WEIM_D4 IOMUX_PAD(0x3D0, 0x124, 4, 0x7fc, 0, NO_PAD_CTRL) +#define MX50_PAD_SD2_WP__CCM_WAIT IOMUX_PAD(0x3D0, 0x124, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX50_PAD_SD2_CD__SD2_CD IOMUX_PAD(0x3D4, 0x128, 0, 0x740, 1, MX50_SD_PAD_CTRL) +#define MX50_PAD_SD2_CD__GPIO_5_17 IOMUX_PAD(0x3D4, 0x128, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_SD2_CD__AUD4_TXC IOMUX_PAD(0x3D4, 0x128, 2, 0x6d4, 0, NO_PAD_CTRL) +#define MX50_PAD_SD2_CD__WEIM_D5 IOMUX_PAD(0x3D4, 0x128, 4, 0x800, 0, NO_PAD_CTRL) +#define MX50_PAD_SD2_CD__CCM_REF_EN IOMUX_PAD(0x3D4, 0x128, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX50_PAD_PMIC_ON_REQ__PMIC_ON_REQ IOMUX_PAD(0x3D8, 0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX50_PAD_PMIC_STBY_REQ__PMIC_STBY_REQ IOMUX_PAD(0x3DC, 0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX50_PAD_PMIC_PORT_B__PMIC_PORT_B IOMUX_PAD(0x3E0, 0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX50_PAD_PMIC_BOOT_MODE1__PMIC_BOOT_MODE1 IOMUX_PAD(0x3E4, 0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX50_PAD_PMIC_RESET_IN_B__PMIC_RESET_IN_B IOMUX_PAD(0x3E8, 0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX50_PAD_PMIC_BOOT_MODE0__PMIC_BOOT_MODE0 IOMUX_PAD(0x3EC, 0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX50_PAD_PMIC_TEST_MODE__PMIC_TEST_MODE IOMUX_PAD(0x3F0, 0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX50_PAD_PMIC_JTAG_TMS__PMIC_JTAG_TMS IOMUX_PAD(0x3F4, 0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX50_PAD_PMIC_JTAG_MOD__PMIC_JTAG_MOD IOMUX_PAD(0x3F8, 0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX50_PAD_PMIC_JTAG_TRSTB__PMIC_JTAG_TRSTB IOMUX_PAD(0x3FC, 0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX50_PAD_PMIC_JTAG_TDI__PMIC_JTAG_TDI IOMUX_PAD(0x400, 0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX50_PAD_PMIC_JTAG_TCK__PMIC_JTAG_TCK IOMUX_PAD(0x404, 0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX50_PAD_PMIC_JTAG_TDO__PMIC_JTAG_TDO IOMUX_PAD(0x408, 0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX50_PAD_DISP_D0__DISP_D0 IOMUX_PAD(0x40C, 0x12C, 0, 0x6fc, 0, MX50_ELCDIF_PAD_CTRL) +#define MX50_PAD_DISP_D0__GPIO_2_0 IOMUX_PAD(0x40C, 0x12C, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_DISP_D0__FEC_TXCLK IOMUX_PAD(0x40C, 0x12C, 2, 0x78c, 0, PAD_CTL_HYS | PAD_CTL_PKE) + +#define MX50_PAD_DISP_D1__DISP_D1 IOMUX_PAD(0x410, 0x130, 0, 0x700, 0, MX50_ELCDIF_PAD_CTRL) +#define MX50_PAD_DISP_D1__GPIO_2_1 IOMUX_PAD(0x410, 0x130, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_DISP_D1__FEC_RX_ER IOMUX_PAD(0x410, 0x130, 2, 0x788, 0, PAD_CTL_HYS | PAD_CTL_PKE) +#define MX50_PAD_DISP_D1__WEIM_A17 IOMUX_PAD(0x410, 0x130, 3, 0x0, 0, NO_PAD_CTRL) + +#define MX50_PAD_DISP_D2__DISP_D2 IOMUX_PAD(0x414, 0x134, 0, 0x704, 0, MX50_ELCDIF_PAD_CTRL) +#define MX50_PAD_DISP_D2__GPIO_2_2 IOMUX_PAD(0x414, 0x134, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_DISP_D2__FEC_RX_DV IOMUX_PAD(0x414, 0x134, 2, 0x784, 0, PAD_CTL_HYS | PAD_CTL_PKE) +#define MX50_PAD_DISP_D2__WEIM_A18 IOMUX_PAD(0x414, 0x134, 3, 0x0, 0, NO_PAD_CTRL) + +#define MX50_PAD_DISP_D3__DISP_D3 IOMUX_PAD(0x418, 0x138, 0, 0x708, 0, MX50_ELCDIF_PAD_CTRL) +#define MX50_PAD_DISP_D3__GPIO_2_3 IOMUX_PAD(0x418, 0x138, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_DISP_D3__FEC_RXD1 IOMUX_PAD(0x418, 0x138, 2, 0x77C, 0, PAD_CTL_HYS | PAD_CTL_PKE) +#define MX50_PAD_DISP_D3__WEIM_A19 IOMUX_PAD(0x418, 0x138, 3, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_DISP_D3__FEC_COL IOMUX_PAD(0x418, 0x138, 4, 0x770, 1, NO_PAD_CTRL) + +#define MX50_PAD_DISP_D4__DISP_D4 IOMUX_PAD(0x41C, 0x13C, 0, 0x70c, 0, MX50_ELCDIF_PAD_CTRL) +#define MX50_PAD_DISP_D4__GPIO_2_4 IOMUX_PAD(0x41C, 0x13C, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_DISP_D4__FEC_RXD0 IOMUX_PAD(0x41C, 0x13C, 2, 0x778, 0, PAD_CTL_HYS | PAD_CTL_PKE) +#define MX50_PAD_DISP_D4__WEIM_A20 IOMUX_PAD(0x41C, 0x13C, 3, 0x0, 0, NO_PAD_CTRL) + +#define MX50_PAD_DISP_D5__DISP_D5 IOMUX_PAD(0x420, 0x140, 0, 0x710, 0, MX50_ELCDIF_PAD_CTRL) +#define MX50_PAD_DISP_D5__GPIO_2_5 IOMUX_PAD(0x420, 0x140, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_DISP_D5__FEC_TX_EN IOMUX_PAD(0x420, 0x140, 2, 0x0, 0, PAD_CTL_DSE_HIGH) +#define MX50_PAD_DISP_D5__WEIM_A21 IOMUX_PAD(0x420, 0x140, 3, 0x0, 0, NO_PAD_CTRL) + +#define MX50_PAD_DISP_D6__DISP_D6 IOMUX_PAD(0x424, 0x144, 0, 0x714, 0, MX50_ELCDIF_PAD_CTRL) +#define MX50_PAD_DISP_D6__GPIO_2_6 IOMUX_PAD(0x424, 0x144, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_DISP_D6__FEC_TXD1 IOMUX_PAD(0x424, 0x144, 2, 0x0, 0, PAD_CTL_DSE_HIGH) +#define MX50_PAD_DISP_D6__WEIM_A22 IOMUX_PAD(0x424, 0x144, 3, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_DISP_D6__FEC_RX_CLK IOMUX_PAD(0x424, 0x144, 4, 0x780, 1, NO_PAD_CTRL) + +#define MX50_PAD_DISP_D7__DISP_D7 IOMUX_PAD(0x428, 0x148, 0, 0x718, 0, MX50_ELCDIF_PAD_CTRL) +#define MX50_PAD_DISP_D7__GPIO_2_7 IOMUX_PAD(0x428, 0x148, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_DISP_D7__FEC_TXD0 IOMUX_PAD(0x428, 0x148, 2, 0x0, 0, PAD_CTL_DSE_HIGH) +#define MX50_PAD_DISP_D7__WEIM_A23 IOMUX_PAD(0x428, 0x148, 3, 0x0, 0, NO_PAD_CTRL) + + +#define MX50_PAD_DISP_WR__ELCDIF_WR IOMUX_PAD(0x42C, 0x14C, 0, 0x0, 0, MX50_ELCDIF_PAD_CTRL) +#define MX50_PAD_DISP_WR__GPIO_2_16 IOMUX_PAD(0x42C, 0x14C, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_DISP_WR__ELCDIF_PIXCLK IOMUX_PAD(0x42C, 0x14C, 2, 0x0, 0, MX50_ELCDIF_PAD_CTRL) +#define MX50_PAD_DISP_WR__WEIM_A24 IOMUX_PAD(0x42C, 0x14C, 3, 0x0, 0, NO_PAD_CTRL) + +#define MX50_PAD_DISP_RD__ELCDIF_RD IOMUX_PAD(0x430, 0x150, 0, 0x0, 0, MX50_ELCDIF_PAD_CTRL) +#define MX50_PAD_DISP_RD__GPIO_2_19 IOMUX_PAD(0x430, 0x150, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_DISP_RD__ELCDIF_EN IOMUX_PAD(0x430, 0x150, 2, 0x0, 0, MX50_ELCDIF_PAD_CTRL) +#define MX50_PAD_DISP_RD__WEIM_A25 IOMUX_PAD(0x430, 0x150, 3, 0x0, 0, NO_PAD_CTRL) + +#define MX50_PAD_DISP_RS__ELCDIF_RS IOMUX_PAD(0x434, 0x154, 0, 0x73c, 1, MX50_ELCDIF_PAD_CTRL) +#define MX50_PAD_DISP_RS__GPIO_2_17 IOMUX_PAD(0x434, 0x154, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_DISP_RS__ELCDIF_VSYNC IOMUX_PAD(0x434, 0x154, 2, 0x73c, 1, MX50_ELCDIF_PAD_CTRL) +#define MX50_PAD_DISP_RS__WEIM_A26 IOMUX_PAD(0x434, 0x154, 3, 0x0, 0, NO_PAD_CTRL) + +#define MX50_PAD_DISP_CS__ELCDIF_CS IOMUX_PAD(0x438, 0x158, 0, 0x0, 0, MX50_ELCDIF_PAD_CTRL) +#define MX50_PAD_DISP_CS__GPIO_2_21 IOMUX_PAD(0x438, 0x158, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_DISP_CS__ELCDIF_HSYNC IOMUX_PAD(0x438, 0x158, 2, 0x6f8, 1, MX50_ELCDIF_PAD_CTRL) +#define MX50_PAD_DISP_CS__WEIM_A27 IOMUX_PAD(0x438, 0x158, 3, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_DISP_CS__WEIM_CS3 IOMUX_PAD(0x438, 0x158, 4, 0x0, 0, NO_PAD_CTRL) + +#define MX50_PAD_DISP_BUSY__ELCDIF_HSYNC IOMUX_PAD(0x43C, 0x15C, 0, 0x6f8, 2, MX50_ELCDIF_PAD_CTRL) +#define MX50_PAD_DISP_BUSY__GPIO_2_18 IOMUX_PAD(0x43C, 0x15C, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_DISP_BUSY__WEIM_CS3 IOMUX_PAD(0x43C, 0x15C, 3, 0x0, 0, NO_PAD_CTRL) + +#define MX50_PAD_DISP_RESET__ELCDIF_RST IOMUX_PAD(0x440, 0x160, 0, 0x0, 0, MX50_ELCDIF_PAD_CTRL) +#define MX50_PAD_DISP_RESET__GPIO_2_20 IOMUX_PAD(0x440, 0x160, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_DISP_RESET__WEIM_CS3 IOMUX_PAD(0x440, 0x160, 4, 0x0, 0, NO_PAD_CTRL) + +#define MX50_PAD_SD3_CMD__SD3_CMD IOMUX_PAD(0x444, 0x164, 0, 0x0, 0, MX50_SD_PAD_CTRL) +#define MX50_PAD_SD3_CMD__GPIO_5_18 IOMUX_PAD(0x444, 0x164, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PIN_SD3_CMD__NANDF_WRN IOMUX_PAD(0x444, 0x164, 2, 0x0, 0, PAD_CTL_DSE_HIGH) +#define MX50_PAD_SD3_CMD__SSP_CMD IOMUX_PAD(0x444, 0x164, 3, 0x0, 0, NO_PAD_CTRL) + +#define MX50_PAD_SD3_CLK__SD3_CLK IOMUX_PAD(0x448, 0x168, 0, 0x0, 0, MX50_SD_PAD_CTRL) +#define MX50_PAD_SD3_CLK__GPIO_5_19 IOMUX_PAD(0x448, 0x168, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PIN_SD3_CLK__NANDF_RDN IOMUX_PAD(0x448, 0x168, 2, 0x0, 0, PAD_CTL_DSE_HIGH) +#define MX50_PAD_SD3_CLK__SSP_CLK IOMUX_PAD(0x448, 0x168, 3, 0x0, 0, NO_PAD_CTRL) + +#define MX50_PAD_SD3_D0__SD3_D0 IOMUX_PAD(0x44C, 0x16C, 0, 0x0, 0, MX50_SD_PAD_CTRL) +#define MX50_PAD_SD3_D0__GPIO_5_20 IOMUX_PAD(0x44C, 0x16C, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PIN_SD3_D0__NANDF_D4 IOMUX_PAD(0x44C, 0x16C, 2, 0x0, 0, PAD_CTL_DSE_HIGH) +#define MX50_PAD_SD3_D0__SSP_D0 IOMUX_PAD(0x44C, 0x16C, 3, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_SD3_D0__PLL1_BYP IOMUX_PAD(0x44C, 0x16C, 7, 0x6dc, 1, NO_PAD_CTRL) + +#define MX50_PAD_SD3_D1__SD3_D1 IOMUX_PAD(0x450, 0x170, 0, 0x0, 0, MX50_SD_PAD_CTRL) +#define MX50_PAD_SD3_D1__GPIO_5_21 IOMUX_PAD(0x450, 0x170, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PIN_SD3_D1__NANDF_D5 IOMUX_PAD(0x450, 0x170, 2, 0x0, 0, PAD_CTL_DSE_HIGH) +#define MX50_PAD_SD3_D1__PLL2_BYP IOMUX_PAD(0x450, 0x170, 7, 0x6e0, 1, NO_PAD_CTRL) + +#define MX50_PAD_SD3_D2__SD3_D2 IOMUX_PAD(0x454, 0x174, 0, 0x0, 0, MX50_SD_PAD_CTRL) +#define MX50_PAD_SD3_D2__GPIO_5_22 IOMUX_PAD(0x454, 0x174, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PIN_SD3_D2__NANDF_D6 IOMUX_PAD(0x454, 0x174, 2, 0x0, 0, PAD_CTL_DSE_HIGH) +#define MX50_PAD_SD3_D2__SSP_D2 IOMUX_PAD(0x454, 0x174, 3, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_SD3_D2__PLL3_BYP IOMUX_PAD(0x454, 0x174, 7, 0x6e4, 1, NO_PAD_CTRL) + +#define MX50_PAD_SD3_D3__SD3_D3 IOMUX_PAD(0x458, 0x178, 0, 0x0, 0, MX50_SD_PAD_CTRL) +#define MX50_PAD_SD3_D3__GPIO_5_23 IOMUX_PAD(0x458, 0x178, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PIN_SD3_D3__NANDF_D7 IOMUX_PAD(0x458, 0x178, 2, 0x0, 0, PAD_CTL_DSE_HIGH) +#define MX50_PAD_SD3_D3__SSP_D3 IOMUX_PAD(0x458, 0x178, 3, 0x0, 0, NO_PAD_CTRL) + +#define MX50_PAD_SD3_D4__SD3_D4 IOMUX_PAD(0x45C, 0x17C, 0, 0x0, 0, MX50_SD_PAD_CTRL) +#define MX50_PAD_SD3_D4__GPIO_5_24 IOMUX_PAD(0x45C, 0x17C, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PIN_SD3_D4__NANDF_D0 IOMUX_PAD(0x45C, 0x17C, 2, 0x0, 0, PAD_CTL_DSE_HIGH) +#define MX50_PAD_SD3_D4__SSP_D4 IOMUX_PAD(0x45C, 0x17C, 1, 0x0, 0, NO_PAD_CTRL) + +#define MX50_PAD_SD3_D5__SD3_D5 IOMUX_PAD(0x460, 0x180, 0, 0x0, 0, MX50_SD_PAD_CTRL) +#define MX50_PAD_SD3_D5__GPIO_5_25 IOMUX_PAD(0x460, 0x180, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PIN_SD3_D5__NANDF_D1 IOMUX_PAD(0x460, 0x180, 2, 0x0, 0, PAD_CTL_DSE_HIGH) +#define MX50_PAD_SD3_D5__SSP_D5 IOMUX_PAD(0x460, 0x180, 3, 0x0, 0, NO_PAD_CTRL) + +#define MX50_PAD_SD3_D6__SD3_D6 IOMUX_PAD(0x464, 0x184, 0, 0x0, 0, MX50_SD_PAD_CTRL) +#define MX50_PAD_SD3_D6__GPIO_5_26 IOMUX_PAD(0x464, 0x184, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PIN_SD3_D6__NANDF_D2 IOMUX_PAD(0x464, 0x184, 2, 0x0, 0, PAD_CTL_DSE_HIGH) +#define MX50_PAD_SD3_D6__SSP_D6 IOMUX_PAD(0x464, 0x184, 3, 0x0, 0, NO_PAD_CTRL) + +#define MX50_PAD_SD3_D7__SD3_D7 IOMUX_PAD(0x468, 0x188, 0, 0x0, 0, MX50_SD_PAD_CTRL) +#define MX50_PAD_SD3_D7__GPIO_5_27 IOMUX_PAD(0x468, 0x188, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PIN_SD3_D7__NANDF_D3 IOMUX_PAD(0x468, 0x188, 2, 0x0, 0, PAD_CTL_DSE_HIGH) +#define MX50_PAD_SD3_D7__SSP_D7 IOMUX_PAD(0x468, 0x188, 3, 0x0, 0, NO_PAD_CTRL) + +#define MX50_PAD_SD3_WP__SD3_WP IOMUX_PAD(0x46C, 0x18C, 0, 0x0, 0, MX50_SD_PAD_CTRL) +#define MX50_PAD_SD3_WP__GPIO_5_28 IOMUX_PAD(0x46C, 0x18C, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PIN_SD3_WP__NANDF_RESETN IOMUX_PAD(0x46C, 0x18C, 2, 0x0, 0, PAD_CTL_DSE_HIGH) +#define MX50_PAD_SD3_WP__SSP_CD IOMUX_PAD(0x46C, 0x18C, 3, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_SD3_WP__SD4_LCTL IOMUX_PAD(0x46C, 0x18C, 4, 0x0, 0, MX50_SD_PAD_CTRL) +#define MX50_PAD_SD3_WP__WEIM_CS3 IOMUX_PAD(0x46C, 0x18C, 5, 0x0, 0, NO_PAD_CTRL) + +#define MX50_PAD_DISP_D8__DISP_D8 IOMUX_PAD(0x470, 0x190, 0, 0x71c, 0, MX50_ELCDIF_PAD_CTRL) +#define MX50_PAD_DISP_D8__GPIO_2_8 IOMUX_PAD(0x470, 0x190, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_DISP_D8__NANDF_CLE IOMUX_PAD(0x470, 0x190, 2, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_DISP_D8__SD1_LCTL IOMUX_PAD(0x470, 0x190, 3, 0x0, 0, MX50_SD_PAD_CTRL) +#define MX50_PAD_DISP_D8__SD4_CMD IOMUX_PAD(0x470, 0x190, 4, 0x74c, 2, MX50_SD_PAD_CTRL) +#define MX50_PAD_DISP_D8__KEY_COL4 IOMUX_PAD(0x470, 0x190, 5, 0x790, 1, NO_PAD_CTRL) +#define MX50_PAD_DISP_D8__FEC_TX_CLK IOMUX_PAD(0x470, 0x190, 6, 0x78c, 1, NO_PAD_CTRL) + +#define MX50_PAD_DISP_D9__DISP_D9 IOMUX_PAD(0x474, 0x194, 0, 0x720, 0, MX50_ELCDIF_PAD_CTRL) +#define MX50_PAD_DISP_D9__GPIO_2_9 IOMUX_PAD(0x474, 0x194, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_DISP_D9__NANDF_ALE IOMUX_PAD(0x474, 0x194, 2, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_DISP_D9__SD2_LCTL IOMUX_PAD(0x474, 0x194, 3, 0x0, 0, MX50_SD_PAD_CTRL) +#define MX50_PAD_DISP_D9__SD4_CLK IOMUX_PAD(0x474, 0x194, 4, 0x748, 2, MX50_SD_PAD_CTRL) +#define MX50_PAD_DISP_D9__KEY_ROW4 IOMUX_PAD(0x474, 0x194, 5, 0x7a0, 1, NO_PAD_CTRL) +#define MX50_PAD_DISP_D9__FEC_RX_ER IOMUX_PAD(0x474, 0x194, 6, 0x788, 1, NO_PAD_CTRL) + +#define MX50_PAD_DISP_D10__DISP_D10 IOMUX_PAD(0x478, 0x198, 0, 0x724, 0, MX50_ELCDIF_PAD_CTRL) +#define MX50_PAD_DISP_D10__GPIO_2_10 IOMUX_PAD(0x478, 0x198, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_DISP_D10__NANDF_CEN0 IOMUX_PAD(0x478, 0x198, 2, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_DISP_D10__SD3_LCTL IOMUX_PAD(0x478, 0x198, 3, 0x0, 0, MX50_SD_PAD_CTRL) +#define MX50_PAD_DISP_D10__SD4_D0 IOMUX_PAD(0x478, 0x198, 4, 0x750, 1, MX50_SD_PAD_CTRL) +#define MX50_PAD_DISP_D10__KEY_COL5 IOMUX_PAD(0x478, 0x198, 5, 0x794, 1, NO_PAD_CTRL) +#define MX50_PAD_DISP_D10__FEC_RX_DV IOMUX_PAD(0x478, 0x198, 6, 0x784, 1, NO_PAD_CTRL) + +#define MX50_PAD_DISP_D11__DISP_D11 IOMUX_PAD(0x47C, 0x19C, 0, 0x728, 0, MX50_ELCDIF_PAD_CTRL) +#define MX50_PAD_DISP_D11__GPIO_2_11 IOMUX_PAD(0x47C, 0x19C, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_DISP_D11__NANDF_CEN1 IOMUX_PAD(0x47C, 0x19C, 2, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_DISP_D11__SD4_D1 IOMUX_PAD(0x47C, 0x19C, 4, 0x754, 1, MX50_SD_PAD_CTRL) +#define MX50_PAD_DISP_D11__KEY_ROW5 IOMUX_PAD(0x47C, 0x19C, 5, 0x7a4, 1, NO_PAD_CTRL) +#define MX50_PAD_DISP_D11__FEC_RDAT1 IOMUX_PAD(0x47C, 0x19C, 6, 0x77c, 1, NO_PAD_CTRL) + +#define MX50_PAD_DISP_D12__DISP_D12 IOMUX_PAD(0x480, 0x1A0, 0, 0x72c, 0, MX50_ELCDIF_PAD_CTRL) +#define MX50_PAD_DISP_D12__GPIO_2_12 IOMUX_PAD(0x480, 0x1A0, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_DISP_D12__NANDF_CEN2 IOMUX_PAD(0x480, 0x1A0, 2, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_DISP_D12__SD1_CD IOMUX_PAD(0x480, 0x1A0, 3, 0x0, 0, MX50_SD_PAD_CTRL) +#define MX50_PAD_DISP_D12__SD4_D2 IOMUX_PAD(0x480, 0x1A0, 4, 0x758, 1, MX50_SD_PAD_CTRL) +#define MX50_PAD_DISP_D12__KEY_COL6 IOMUX_PAD(0x480, 0x1A0, 5, 0x798, 1, NO_PAD_CTRL) +#define MX50_PAD_DISP_D12__FEC_RDAT0 IOMUX_PAD(0x480, 0x1A0, 6, 0x778, 1, NO_PAD_CTRL) + +#define MX50_PAD_DISP_D13__DISP_D13 IOMUX_PAD(0x484, 0x1A4, 0, 0x730, 0, MX50_ELCDIF_PAD_CTRL) +#define MX50_PAD_DISP_D13__GPIO_2_13 IOMUX_PAD(0x484, 0x1A4, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_DISP_D13__NANDF_CEN3 IOMUX_PAD(0x484, 0x1A4, 2, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_DISP_D13__SD3_CD IOMUX_PAD(0x484, 0x1A4, 3, 0x0, 0, MX50_SD_PAD_CTRL) +#define MX50_PAD_DISP_D13__SD4_D3 IOMUX_PAD(0x484, 0x1A4, 4, 0x75c, 1, MX50_SD_PAD_CTRL) +#define MX50_PAD_DISP_D13__KEY_ROW6 IOMUX_PAD(0x484, 0x1A4, 5, 0x7a8, 1, NO_PAD_CTRL) +#define MX50_PAD_DISP_D13__FEC_TX_EN IOMUX_PAD(0x484, 0x1A4, 6, 0x0, 0, NO_PAD_CTRL) + +#define MX50_PAD_DISP_D14__DISP_D14 IOMUX_PAD(0x488, 0x1A8, 0, 0x734, 0, MX50_ELCDIF_PAD_CTRL) +#define MX50_PAD_DISP_D14__GPIO_2_14 IOMUX_PAD(0x488, 0x1A8, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_DISP_D14__NANDF_RDY0 IOMUX_PAD(0x488, 0x1A8, 2, 0x7b4, 1, NO_PAD_CTRL) +#define MX50_PAD_DISP_D14__SD1_WP IOMUX_PAD(0x488, 0x1A8, 3, 0x0, 0, MX50_SD_PAD_CTRL) +#define MX50_PAD_DISP_D14__SD4_WP IOMUX_PAD(0x488, 0x1A8, 4, 0x0, 0, MX50_SD_PAD_CTRL) +#define MX50_PAD_DISP_D14__KEY_COL7 IOMUX_PAD(0x488, 0x1A8, 5, 0x79c, 1, NO_PAD_CTRL) +#define MX50_PAD_DISP_D14__FEC_TDAT1 IOMUX_PAD(0x488, 0x1A8, 6, 0x0, 0, NO_PAD_CTRL) + +#define MX50_PAD_DISP_D15__DISP_D15 IOMUX_PAD(0x48C, 0x1AC, 0, 0x738, 0, MX50_ELCDIF_PAD_CTRL) +#define MX50_PAD_DISP_D15__GPIO_2_15 IOMUX_PAD(0x48C, 0x1AC, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_DISP_D15__NANDF_DQS IOMUX_PAD(0x48C, 0x1AC, 2, 0x7b0, 1, NO_PAD_CTRL) +#define MX50_PAD_DISP_D15__SD3_RST IOMUX_PAD(0x48C, 0x1AC, 3, 0x0, 0, MX50_SD_PAD_CTRL) +#define MX50_PAD_DISP_D15__SD4_CD IOMUX_PAD(0x48C, 0x1AC, 4, 0x0, 0, MX50_SD_PAD_CTRL) +#define MX50_PAD_DISP_D15__KEY_ROW7 IOMUX_PAD(0x48C, 0x1AC, 5, 0x7ac, 1, NO_PAD_CTRL) +#define MX50_PAD_DISP_D15__FEC_TDAT0 IOMUX_PAD(0x48C, 0x1AC, 6, 0x0, 0, NO_PAD_CTRL) + +#define MX50_PAD_EPDC_D0__EPDC_D0 IOMUX_PAD(0x54C, 0x1B0, 0, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EPDC_D0__GPIO_3_0 IOMUX_PAD(0x54C, 0x1B0, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EPDC_D0__WEIM_D0 IOMUX_PAD(0x54C, 0x1B0, 2, 0x7ec, 1, NO_PAD_CTRL) +#define MX50_PAD_EPDC_D0__ELCDIF_RS IOMUX_PAD(0x54C, 0x1B0, 3, 0x0, 0, MX50_ELCDIF_PAD_CTRL) +#define MX50_PAD_EPDC_D0__ELCDIF_PIXCLK IOMUX_PAD(0x54C, 0x1B0, 4, 0x0, 0, MX50_ELCDIF_PAD_CTRL) + +#define MX50_PAD_EPDC_D1__EPDC_D1 IOMUX_PAD(0x550, 0x1B4, 0, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EPDC_D1__GPIO_3_1 IOMUX_PAD(0x550, 0x1B4, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EPDC_D1__WEIM_D1 IOMUX_PAD(0x550, 0x1B4, 2, 0x7f0, 1, NO_PAD_CTRL) +#define MX50_PAD_EPDC_D1__ELCDIF_CS IOMUX_PAD(0x550, 0x1B4, 3, 0x0, 0, MX50_ELCDIF_PAD_CTRL) +#define MX50_PAD_EPDC_D1__ELCDIF_EN IOMUX_PAD(0x550, 0x1B4, 4, 0x0, 0, MX50_ELCDIF_PAD_CTRL) + +#define MX50_PAD_EPDC_D2__EPDC_D2 IOMUX_PAD(0x554, 0x1B8, 0, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EPDC_D2__GPIO_3_2 IOMUX_PAD(0x554, 0x1B8, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EPDC_D2__WEIM_D2 IOMUX_PAD(0x554, 0x1B8, 2, 0x7f4, 1, NO_PAD_CTRL) +#define MX50_PAD_EPDC_D2__ELCDIF_WR IOMUX_PAD(0x554, 0x1B8, 3, 0x0, 0, MX50_ELCDIF_PAD_CTRL) +#define MX50_PAD_EPDC_D2__ELCDIF_VSYNC IOMUX_PAD(0x554, 0x1B8, 4, 0x73c, 2, MX50_ELCDIF_PAD_CTRL) + +#define MX50_PAD_EPDC_D3__EPDC_D3 IOMUX_PAD(0x558, 0x1BC, 0, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EPDC_D3__GPIO_3_3 IOMUX_PAD(0x558, 0x1BC, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EPDC_D3__WEIM_D3 IOMUX_PAD(0x558, 0x1BC, 2, 0x7f8, 1, NO_PAD_CTRL) +#define MX50_PAD_EPDC_D3__ELCDIF_RD IOMUX_PAD(0x558, 0x1BC, 3, 0x0, 0, MX50_ELCDIF_PAD_CTRL) +#define MX50_PAD_EPDC_D3__ELCDIF_HSYNC IOMUX_PAD(0x558, 0x1BC, 4, 0x6f8, 3, MX50_ELCDIF_PAD_CTRL) + +#define MX50_PAD_EPDC_D4__EPDC_D4 IOMUX_PAD(0x55C, 0x1C0, 0, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EPDC_D4__GPIO_3_4 IOMUX_PAD(0x55C, 0x1C0, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EPDC_D4__WEIM_D4 IOMUX_PAD(0x55C, 0x1C0, 2, 0x7fc, 1, NO_PAD_CTRL) + +#define MX50_PAD_EPDC_D5__EPDC_D5 IOMUX_PAD(0x560, 0x1C4, 0, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EPDC_D5__GPIO_3_5 IOMUX_PAD(0x560, 0x1C4, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EPDC_D5__WEIM_D5 IOMUX_PAD(0x560, 0x1C4, 2, 0x800, 1, NO_PAD_CTRL) + +#define MX50_PAD_EPDC_D6__EPDC_D6 IOMUX_PAD(0x564, 0x1C8, 0, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EPDC_D6__GPIO_3_6 IOMUX_PAD(0x564, 0x1C8, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EPDC_D6__WEIM_D6 IOMUX_PAD(0x564, 0x1C8, 2, 0x804, 1, NO_PAD_CTRL) + +#define MX50_PAD_EPDC_D7__EPDC_D7 IOMUX_PAD(0x568, 0x1CC, 0, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EPDC_D7__GPIO_3_7 IOMUX_PAD(0x568, 0x1CC, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EPDC_D7__WEIM_D7 IOMUX_PAD(0x568, 0x1CC, 2, 0x808, 1, NO_PAD_CTRL) + +#define MX50_PAD_EPDC_D8__EPDC_D8 IOMUX_PAD(0x56C, 0x1D0, 0, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EPDC_D8__GPIO_3_8 IOMUX_PAD(0x56C, 0x1D0, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EPDC_D8__WEIM_D8 IOMUX_PAD(0x56C, 0x1D0, 2, 0x80c, 2, NO_PAD_CTRL) +#define MX50_PAD_EPDC_D8__ELCDIF_D24 IOMUX_PAD(0x56C, 0x1D0, 3, 0x0, 0, MX50_ELCDIF_PAD_CTRL) + +#define MX50_PAD_EPDC_D9__EPDC_D9 IOMUX_PAD(0x570, 0x1D4, 0, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EPDC_D9__GPIO_3_9 IOMUX_PAD(0x570, 0x1D4, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EPDC_D9__WEIM_D9 IOMUX_PAD(0x570, 0x1D4, 2, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EPDC_D9__ELCDIF_D25 IOMUX_PAD(0x570, 0x1D4, 3, 0x810, 2, MX50_ELCDIF_PAD_CTRL) + +#define MX50_PAD_EPDC_D10__EPDC_D10 IOMUX_PAD(0x574, 0x1D8, 0, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EPDC_D10__GPIO_3_10 IOMUX_PAD(0x574, 0x1D8, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EPDC_D10__WEIM_D10 IOMUX_PAD(0x574, 0x1D8, 2, 0x814, 2, NO_PAD_CTRL) +#define MX50_PAD_EPDC_D10__ELCDIF_D26 IOMUX_PAD(0x574, 0x1D8, 3, 0x0, 0, NO_PAD_CTRL) + +#define MX50_PAD_EPDC_D11__EPDC_D11 IOMUX_PAD(0x578, 0x1DC, 0, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EPDC_D11__GPIO_3_11 IOMUX_PAD(0x578, 0x1DC, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EPDC_D11__WEIM_D11 IOMUX_PAD(0x578, 0x1DC, 2, 0x818, 2, NO_PAD_CTRL) +#define MX50_PAD_EPDC_D11__ELCDIF_D27 IOMUX_PAD(0x578, 0x1DC, 3, 0x0, 0, MX50_ELCDIF_PAD_CTRL) + +#define MX50_PAD_EPDC_D12__EPDC_D12 IOMUX_PAD(0x57C, 0x1E0, 0, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EPDC_D12__GPIO_3_12 IOMUX_PAD(0x57C, 0x1E0, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EPDC_D12__WEIM_D12 IOMUX_PAD(0x57C, 0x1E0, 2, 0x81c, 1, NO_PAD_CTRL) +#define MX50_PAD_EPDC_D12__ELCDIF_D28 IOMUX_PAD(0x57C, 0x1E0, 3, 0x0, 0, MX50_ELCDIF_PAD_CTRL) + +#define MX50_PAD_EPDC_D13__EPDC_D13 IOMUX_PAD(0x580, 0x1E4, 0, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EPDC_D13__GPIO_3_13 IOMUX_PAD(0x580, 0x1E4, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EPDC_D13__WEIM_D13 IOMUX_PAD(0x580, 0x1E4, 2, 0x820, 1, NO_PAD_CTRL) +#define MX50_PAD_EPDC_D13__ELCDIF_D29 IOMUX_PAD(0x580, 0x1E4, 3, 0x0, 0, MX50_ELCDIF_PAD_CTRL) + +#define MX50_PAD_EPDC_D14__EPDC_D14 IOMUX_PAD(0x584, 0x1E8, 0, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EPDC_D14__GPIO_3_14 IOMUX_PAD(0x584, 0x1E8, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EPDC_D14__WEIM_D14 IOMUX_PAD(0x584, 0x1E8, 2, 0x824, 1, NO_PAD_CTRL) +#define MX50_PAD_EPDC_D14__ELCDIF_D30 IOMUX_PAD(0x584, 0x1E8, 3, 0x0, 0, MX50_ELCDIF_PAD_CTRL) +#define MX50_PAD_EPDC_D14__AUD6_TXD IOMUX_PAD(0x584, 0x1E8, 4, 0x0, 0, NO_PAD_CTRL) + +#define MX50_PAD_EPDC_D15__EPDC_D15 IOMUX_PAD(0x588, 0x1EC, 0, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EPDC_D15__GPIO_3_15 IOMUX_PAD(0x588, 0x1EC, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EPDC_D15__WEIM_D15 IOMUX_PAD(0x588, 0x1EC, 2, 0x828, 1, NO_PAD_CTRL) +#define MX50_PAD_EPDC_D15__ELCDIF_D31 IOMUX_PAD(0x588, 0x1EC, 3, 0x0, 0, MX50_ELCDIF_PAD_CTRL) +#define MX50_PAD_EPDC_D15__AUD6_TXC IOMUX_PAD(0x588, 0x1EC, 4, 0x0, 0, NO_PAD_CTRL) + +#define MX50_PAD_EPDC_GDCLK__EPDC_GDCLK IOMUX_PAD(0x58C, 0x1F0, 0, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EPDC_GDCLK__GPIO_3_16 IOMUX_PAD(0x58C, 0x1F0, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EPDC_GDCLK__WEIM_D16 IOMUX_PAD(0x58C, 0x1F0, 2, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EPDC_GDCLK__ELCDIF_D16 IOMUX_PAD(0x58C, 0x1F0, 3, 0x0, 0, MX50_ELCDIF_PAD_CTRL) +#define MX50_PAD_EPDC_GDCLK__AUD6_TXFS IOMUX_PAD(0x58C, 0x1F0, 4, 0x0, 0, NO_PAD_CTRL) + +#define MX50_PAD_EPDC_GDSP__EPDC_GDSP IOMUX_PAD(0x590, 0x1F4, 0, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EPDC_GDSP__GPIO_3_17 IOMUX_PAD(0x590, 0x1F4, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EPDC_GDSP__WEIM_D17 IOMUX_PAD(0x590, 0x1F4, 2, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EPDC_GDSP__ELCDIF_D17 IOMUX_PAD(0x590, 0x1F4, 3, 0x0, 0, MX50_ELCDIF_PAD_CTRL) +#define MX50_PAD_EPDC_GDSP__AUD6_RXD IOMUX_PAD(0x590, 0x1F4, 4, 0x0, 0, NO_PAD_CTRL) + +#define MX50_PAD_EPDC_GDOE__EPDC_GDOE IOMUX_PAD(0x594, 0x1F8, 0, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EPDC_GDOE__GPIO_3_18 IOMUX_PAD(0x594, 0x1F8, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EPDC_GDOE__WEIM_D18 IOMUX_PAD(0x594, 0x1F8, 2, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EPDC_GDOE__ELCDIF_D18 IOMUX_PAD(0x594, 0x1F8, 3, 0x0, 0, MX50_ELCDIF_PAD_CTRL) +#define MX50_PAD_EPDC_GDOE__AUD6_RXC IOMUX_PAD(0x594, 0x1F8, 4, 0x0, 0, NO_PAD_CTRL) + +#define MX50_PAD_EPDC_GDRL__EPDC_GDRL IOMUX_PAD(0x598, 0x1FC, 0, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EPDC_GDRL__GPIO_3_19 IOMUX_PAD(0x598, 0x1FC, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EPDC_GDRL__WEIM_D19 IOMUX_PAD(0x598, 0x1FC, 2, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EPDC_GDRL__ELCDIF_D19 IOMUX_PAD(0x598, 0x1FC, 3, 0x0, 0, MX50_ELCDIF_PAD_CTRL) +#define MX50_PAD_EPDC_GDRL__AUD6_RXFS IOMUX_PAD(0x598, 0x1FC, 4, 0x0, 0, NO_PAD_CTRL) + +#define MX50_PAD_EPDC_SDCLK__EPDC_SDCLK IOMUX_PAD(0x59C, 0x200, 0, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EPDC_SDCLK__GPIO_3_20 IOMUX_PAD(0x59C, 0x200, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EPDC_SDCLK__WEIM_D20 IOMUX_PAD(0x59C, 0x200, 2, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EPDC_SDCLK__ELCDIF_D20 IOMUX_PAD(0x59C, 0x200, 3, 0x0, 0, MX50_ELCDIF_PAD_CTRL) +#define MX50_PAD_EPDC_SDCLK__AUD5_TXD IOMUX_PAD(0x59C, 0x200, 4, 0x0, 0, NO_PAD_CTRL) + +#define MX50_PAD_EPDC_SDOEZ__EPDC_SDOEZ IOMUX_PAD(0x5A0, 0x204, 0, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EPDC_SDOEZ__GPIO_3_21 IOMUX_PAD(0x5A0, 0x204, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EPDC_SDOEZ__WEIM_D21 IOMUX_PAD(0x5A0, 0x204, 2, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EPDC_SDOEZ__ELCDIF_D21 IOMUX_PAD(0x5A0, 0x204, 3, 0x0, 0, MX50_ELCDIF_PAD_CTRL) +#define MX50_PAD_EPDC_SDOEZ__AUD5_TXC IOMUX_PAD(0x5A0, 0x204, 4, 0x0, 0, NO_PAD_CTRL) + +#define MX50_PAD_EPDC_SDOED__EPDC_SDOED IOMUX_PAD(0x5A4, 0x208, 0, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EPDC_SDOED__GPIO_3_22 IOMUX_PAD(0x5A4, 0x208, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EPDC_SDOED__WEIM_D22 IOMUX_PAD(0x5A4, 0x208, 2, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EPDC_SDOED__ELCDIF_D22 IOMUX_PAD(0x5A4, 0x208, 3, 0x0, 0, MX50_ELCDIF_PAD_CTRL) +#define MX50_PAD_EPDC_SDOED__AUD5_TXFS IOMUX_PAD(0x5A4, 0x208, 4, 0x0, 0, NO_PAD_CTRL) + +#define MX50_PAD_EPDC_SDOE__EPDC_SDOE IOMUX_PAD(0x5A8, 0x20C, 0, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EPDC_SDOE__GPIO_3_23 IOMUX_PAD(0x5A8, 0x20C, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EPDC_SDOE__WEIM_D23 IOMUX_PAD(0x5A8, 0x20C, 2, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EPDC_SDOE__ELCDIF_D23 IOMUX_PAD(0x5A8, 0x20C, 3, 0x0, 0, MX50_ELCDIF_PAD_CTRL) +#define MX50_PAD_EPDC_SDOE__AUD5_RXD IOMUX_PAD(0x5A8, 0x20C, 4, 0x0, 0, NO_PAD_CTRL) + +#define MX50_PAD_EPDC_SDLE__EPDC_SDLE IOMUX_PAD(0x5AC, 0x210, 0, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EPDC_SDLE__GPIO_3_24 IOMUX_PAD(0x5AC, 0x210, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EPDC_SDLE__WEIM_D24 IOMUX_PAD(0x5AC, 0x210, 2, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EPDC_SDLE__ELCDIF_D8 IOMUX_PAD(0x5AC, 0x210, 3, 0x71c, 1, MX50_ELCDIF_PAD_CTRL) +#define MX50_PAD_EPDC_SDLE__AUD5_RXC IOMUX_PAD(0x5AC, 0x210, 4, 0x0, 0, NO_PAD_CTRL) + +#define MX50_PAD_EPDC_SDCLKN__EPDC_SDCLKN IOMUX_PAD(0x5B0, 0x214, 0, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EPDC_SDCLKN__GPIO_3_25 IOMUX_PAD(0x5B0, 0x214, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EPDC_SDCLKN__WEIM_D25 IOMUX_PAD(0x5B0, 0x214, 2, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EPDC_SDCLKN__ELCDIF_D9 IOMUX_PAD(0x5B0, 0x214, 3, 0x720, 1, MX50_ELCDIF_PAD_CTRL) +#define MX50_PAD_EPDC_SDCLKN__AUD5_RXFS IOMUX_PAD(0x5B0, 0x214, 4, 0x0, 0, NO_PAD_CTRL) + +#define MX50_PAD_EPDC_SDSHR__EPDC_SDSHR IOMUX_PAD(0x5B4, 0x218, 0, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EPDC_SDSHR__GPIO_3_26 IOMUX_PAD(0x5B4, 0x218, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EPDC_SDSHR__WEIM_D26 IOMUX_PAD(0x5B4, 0x218, 2, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EPDC_SDSHR__ELCDIF_D10 IOMUX_PAD(0x5B4, 0x218, 3, 0x724, 1, MX50_ELCDIF_PAD_CTRL) +#define MX50_PAD_EPDC_SDSHR__AUD4_TXD IOMUX_PAD(0x5B4, 0x218, 4, 0x6c8, 1, NO_PAD_CTRL) + +#define MX50_PAD_EPDC_PWRCOM__EPDC_PWRCOM IOMUX_PAD(0x5B8, 0x21C, 0, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EPDC_PWRCOM__GPIO_3_27 IOMUX_PAD(0x5B8, 0x21C, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EPDC_PWRCOM__WEIM_D27 IOMUX_PAD(0x5B8, 0x21C, 2, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EPDC_PWRCOM__ELCDIF_D11 IOMUX_PAD(0x5B8, 0x21C, 3, 0x728, 1, MX50_ELCDIF_PAD_CTRL) +#define MX50_PAD_EPDC_PWRCOM__AUD4_TXC IOMUX_PAD(0x5B8, 0x21C, 4, 0x6d4, 1, NO_PAD_CTRL) + +#define MX50_PAD_EPDC_PWRSTAT__EPDC_PWRSTAT IOMUX_PAD(0x5BC, 0x220, 0, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EPDC_PWRSTAT__GPIO_3_28 IOMUX_PAD(0x5BC, 0x220, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EPDC_PWRSTAT__WEIM_D28 IOMUX_PAD(0x5BC, 0x220, 2, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EPDC_PWRSTAT__ELCDIF_D12 IOMUX_PAD(0x5BC, 0x220, 3, 0x72c, 1, MX50_ELCDIF_PAD_CTRL) +#define MX50_PAD_EPDC_PWRSTAT__AUD4_TXFS IOMUX_PAD(0x5BC, 0x220, 4, 0x6d8, 1, NO_PAD_CTRL) + +#define MX50_PAD_EPDC_PWRCTRL0__EPDC_PWRCTRL0 IOMUX_PAD(0x5C0, 0x224, 0, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EPDC_PWRCTRL0__GPIO_3_29 IOMUX_PAD(0x5C0, 0x224, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EPDC_PWRCTRL0__WEIM_D29 IOMUX_PAD(0x5C0, 0x224, 2, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EPDC_PWRCTRL0__ELCDIF_D13 IOMUX_PAD(0x5C0, 0x224, 3, 0x730, 1, MX50_ELCDIF_PAD_CTRL) +#define MX50_PAD_EPDC_PWRCTRL0__AUD4_RXD IOMUX_PAD(0x5C0, 0x224, 4, 0x6c4, 1, NO_PAD_CTRL) + +#define MX50_PAD_EPDC_PWRCTRL1__EPDC_PWRCTRL1 IOMUX_PAD(0x5C4, 0x228, 0, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EPDC_PWRCTRL1__GPIO_3_30 IOMUX_PAD(0x5C4, 0x228, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EPDC_PWRCTRL1__WEIM_D30 IOMUX_PAD(0x5C4, 0x228, 2, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EPDC_PWRCTRL1__ELCDIF_D14 IOMUX_PAD(0x5C4, 0x228, 3, 0x734, 1, MX50_ELCDIF_PAD_CTRL) +#define MX50_PAD_EPDC_PWRCTRL1__AUD4_RXC IOMUX_PAD(0x5C4, 0x228, 4, 0x6cc, 1, NO_PAD_CTRL) + +#define MX50_PAD_EPDC_PWRCTRL2__EPDC_PWRCTRL2 IOMUX_PAD(0x5C8, 0x22C, 0, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EPDC_PWRCTRL2__GPIO_3_31 IOMUX_PAD(0x5C8, 0x22C, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EPDC_PWRCTRL2__WEIM_D31 IOMUX_PAD(0x5C8, 0x22C, 2, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EPDC_PWRCTRL2__ELCDIF_D15 IOMUX_PAD(0x5C8, 0x22C, 3, 0x738, 1, MX50_ELCDIF_PAD_CTRL) +#define MX50_PAD_EPDC_PWRCTRL2__AUD4_RXFS IOMUX_PAD(0x5C8, 0x22C, 4, 0x6d0, 1, NO_PAD_CTRL) +#define MX50_PAD_EPDC_PWRCTRL2__SDMA_EXT0 IOMUX_PAD(0x5C8, 0x22C, 6, 0x7b8, 1, NO_PAD_CTRL) + +#define MX50_PAD_EPDC_PWRCTRL3__PWRCTRL3 IOMUX_PAD(0x5CC, 0x230, 0, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EPDC_PWRCTRL3__GPIO_4_20 IOMUX_PAD(0x5CC, 0x230, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EPDC_PWRCTRL3__WEIM_EB2 IOMUX_PAD(0x5CC, 0x230, 2, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EPDC_PWRCTRL3__SDMA_EXT1 IOMUX_PAD(0x5CC, 0x230, 6, 0x7bc, 1, NO_PAD_CTRL) + +#define MX50_PAD_EPDC_VCOM0__EPDC_VCOM0 IOMUX_PAD(0x5D0, 0x234, 0, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EPDC_VCOM0__GPIO_4_21 IOMUX_PAD(0x5D0, 0x234, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EPDC_VCOM0__WEIM_EB3 IOMUX_PAD(0x5D0, 0x234, 2, 0x0, 0, NO_PAD_CTRL) + +#define MX50_PAD_EPDC_VCOM1__EPDC_VCOM1 IOMUX_PAD(0x5D4, 0x238, 0, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EPDC_VCOM1__GPIO_4_22 IOMUX_PAD(0x5D4, 0x238, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EPDC_VCOM1__WEIM_CS3 IOMUX_PAD(0x5D4, 0x238, 2, 0x0, 0, NO_PAD_CTRL) + +#define MX50_PAD_EPDC_BDR0__EPDC_BDR0 IOMUX_PAD(0x5D8, 0x23C, 0, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EPDC_BDR0__GPIO_4_23 IOMUX_PAD(0x5D8, 0x23C, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EPDC_BDR0__ELCDIF_D7 IOMUX_PAD(0x5D8, 0x23C, 3, 0x718, 1, MX50_ELCDIF_PAD_CTRL) + +#define MX50_PAD_EPDC_BDR1__EPDC_BDR1 IOMUX_PAD(0x5DC, 0x240, 0, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EPDC_BDR1__GPIO_4_24 IOMUX_PAD(0x5DC, 0x240, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EPDC_BDR1__ELCDIF_D6 IOMUX_PAD(0x5DC, 0x240, 3, 0x714, 1, MX50_ELCDIF_PAD_CTRL) + +#define MX50_PAD_EPDC_SDCE0__EPDC_SDCE0 IOMUX_PAD(0x5E0, 0x244, 0, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EPDC_SDCE0__GPIO_4_25 IOMUX_PAD(0x5E0, 0x244, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EPDC_SDCE0__ELCDIF_D5 IOMUX_PAD(0x5E0, 0x244, 3, 0x710, 1, MX50_ELCDIF_PAD_CTRL) + +#define MX50_PAD_EPDC_SDCE1__EPDC_SDCE1 IOMUX_PAD(0x5E4, 0x248, 0, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EPDC_SDCE1__GPIO_4_26 IOMUX_PAD(0x5E4, 0x248, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EPDC_SDCE1__ELCDIF_D4 IOMUX_PAD(0x5E4, 0x248, 2, 0x70c, 1, MX50_ELCDIF_PAD_CTRL) + +#define MX50_PAD_EPDC_SDCE2__EPDC_SDCE2 IOMUX_PAD(0x5E8, 0x24C, 0, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EPDC_SDCE2__GPIO_4_27 IOMUX_PAD(0x5E8, 0x24C, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EPDC_SDCE2__ELCDIF_DAT3 IOMUX_PAD(0x5E8, 0x24C, 3, 0x708, 1, MX50_ELCDIF_PAD_CTRL) + +#define MX50_PAD_EPDC_SDCE3__EPDC_SDCE3 IOMUX_PAD(0x5EC, 0x250, 0, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EPDC_SDCE3__GPIO_4_28 IOMUX_PAD(0x5EC, 0x250, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EPDC_SDCE3__ELCDIF_D2 IOMUX_PAD(0x5EC, 0x250, 3, 0x704, 1, MX50_ELCDIF_PAD_CTRL) + +#define MX50_PAD_EPDC_SDCE4__EPDC_SDCE4 IOMUX_PAD(0x5F0, 0x254, 0, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EPDC_SDCE4__GPIO_4_29 IOMUX_PAD(0x5F0, 0x254, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EPDC_SDCE4__ELCDIF_D1 IOMUX_PAD(0x5F0, 0x254, 3, 0x700, 1, MX50_ELCDIF_PAD_CTRL) + +#define MX50_PAD_EPDC_SDCE5__EPDC_SDCE5 IOMUX_PAD(0x5F4, 0x258, 0, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EPDC_SDCE5__GPIO_4_30 IOMUX_PAD(0x5F4, 0x258, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EPDC_SDCE5__ELCDIF_D0 IOMUX_PAD(0x5F4, 0x258, 3, 0x6fc, 1, MX50_ELCDIF_PAD_CTRL) + +#define MX50_PAD_EIM_DA0__WEIM_A0 IOMUX_PAD(0x5F8, 0x25C, 0, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EIM_DA0__GPIO_1_0 IOMUX_PAD(0x5F8, 0x25C, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EIM_DA0__KEY_COL4 IOMUX_PAD(0x5f8, 0x25C, 3, 0x790, 2, NO_PAD_CTRL) + +#define MX50_PAD_EIM_DA1__WEIM_A1 IOMUX_PAD(0x5FC, 0x260, 0, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EIM_DA1__GPIO_1_1 IOMUX_PAD(0x5FC, 0x260, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EIM_DA1__KEY_ROW4 IOMUX_PAD(0x5fc, 0x260, 3, 0x7a0, 2, MX50_KEYPAD_CTRL) + +#define MX50_PAD_EIM_DA2__WEIM_A2 IOMUX_PAD(0x600, 0x264, 0, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EIM_DA2__GPIO_1_2 IOMUX_PAD(0x600, 0x264, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EIM_DA2__KEY_COL5 IOMUX_PAD(0x600, 0x264, 3, 0x794, 2, NO_PAD_CTRL) + +#define MX50_PAD_EIM_DA3__WEIM_A3 IOMUX_PAD(0x604, 0x268, 0, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EIM_DA3__GPIO_1_3 IOMUX_PAD(0x604, 0x268, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EIM_DA3__KEY_ROW5 IOMUX_PAD(0x604, 0x268, 3, 0x7a4, 2, MX50_KEYPAD_CTRL) + +#define MX50_PAD_EIM_DA4__WEIM_A4 IOMUX_PAD(0x608, 0x26C, 0, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EIM_DA4__GPIO_1_4 IOMUX_PAD(0x608, 0x26C, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EIM_DA4__KEY_COL6 IOMUX_PAD(0x608, 0x26C, 3, 0x798, 2, NO_PAD_CTRL) + +#define MX50_PAD_EIM_DA5__WEIM_A5 IOMUX_PAD(0x60C, 0x270, 0, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EIM_DA5__GPIO_1_5 IOMUX_PAD(0x60C, 0x270, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EIM_DA5__KEY_ROW6 IOMUX_PAD(0x60C, 0x270, 3, 0x7a8, 2, MX50_KEYPAD_CTRL) + +#define MX50_PAD_EIM_DA6__WEIM_A6 IOMUX_PAD(0x610, 0x274, 0, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EIM_DA6__GPIO_1_6 IOMUX_PAD(0x610, 0x274, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EIM_DA6__KEY_COL7 IOMUX_PAD(0x610, 0x274, 3, 0x79c, 2, NO_PAD_CTRL) + +#define MX50_PAD_EIM_DA7__WEIM_A7 IOMUX_PAD(0x614, 0x278, 0, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EIM_DA7__GPIO_1_7 IOMUX_PAD(0x614, 0x278, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EIM_DA7__KEY_ROW7 IOMUX_PAD(0x614, 0x278, 3, 0x7ac, 2, MX50_KEYPAD_CTRL) + +#define MX50_PAD_EIM_DA8__WEIM_A8 IOMUX_PAD(0x618, 0x27C, 0, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EIM_DA8__GPIO_1_8 IOMUX_PAD(0x618, 0x27C, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PIN_EIM_DA8__NANDF_CLE IOMUX_PAD(0x618, 0x27C, 2, 0x0, 0, PAD_CTL_DSE_HIGH) + +#define MX50_PAD_EIM_DA9__WEIM_A9 IOMUX_PAD(0x61C, 0x280, 0, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EIM_DA9__GPIO_1_9 IOMUX_PAD(0x61C, 0x280, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PIN_EIM_DA9__NANDF_ALE IOMUX_PAD(0x61C, 0x280, 2, 0x0, 0, PAD_CTL_DSE_HIGH) + +#define MX50_PAD_EIM_DA10__WEIM_A10 IOMUX_PAD(0x620, 0x284, 0, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EIM_DA10__GPIO_1_10 IOMUX_PAD(0x620, 0x284, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PIN_EIM_DA10__NANDF_CE0 IOMUX_PAD(0x620, 0x284, 2, 0x0, 0, PAD_CTL_DSE_HIGH) + +#define MX50_PAD_EIM_DA11__WEIM_A11 IOMUX_PAD(0x624, 0x288, 0, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EIM_DA11__GPIO_1_11 IOMUX_PAD(0x624, 0x288, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PIN_EIM_DA11__NANDF_CE1 IOMUX_PAD(0x624, 0x288, 2, 0x0, 0, PAD_CTL_DSE_HIGH) + +#define MX50_PAD_EIM_DA12__WEIM_A12 IOMUX_PAD(0x628, 0x28C, 0, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EIM_DA12__GPIO_1_12 IOMUX_PAD(0x628, 0x28C, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PIN_EIM_DA12__NANDF_CE2 IOMUX_PAD(0x628, 0x28C, 2, 0x0, 0, PAD_CTL_DSE_HIGH) +#define MX50_PAD_EIM_DA12__EPDC_SDCE6 IOMUX_PAD(0x628, 0x28C, 3, 0x0, 0, NO_PAD_CTRL) + +#define MX50_PAD_EIM_DA13__WEIM_A13 IOMUX_PAD(0x62C, 0x290, 0, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EIM_DA13__GPIO_1_13 IOMUX_PAD(0x62C, 0x290, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PIN_EIM_DA13__NANDF_CE3 IOMUX_PAD(0x62C, 0x290, 2, 0x0, 0, PAD_CTL_DSE_HIGH) +#define MX50_PIN_EIM_DA13__EPDC_SDCE7 IOMUX_PAD(0x62C, 0x290, 3, 0x0, 0, NO_PAD_CTRL) + +#define MX50_PAD_EIM_DA14__WEIM_A14 IOMUX_PAD(0x630, 0x294, 0, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EIM_DA14__GPIO_1_14 IOMUX_PAD(0x630, 0x294, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EIM_DA14__NANDF_READY IOMUX_PAD(0x630, 0x294, 2, 0x7B4, 2, PAD_CTL_PKE | \ + PAD_CTL_PUE | PAD_CTL_PUS_100K_UP) +#define MX50_PAD_EIM_DA14__EPDC_SDCE8 IOMUX_PAD(0x630, 0x294, 3, 0x0, 0, NO_PAD_CTRL) + +#define MX50_PAD_EIM_DA15__WEIM_A15 IOMUX_PAD(0x634, 0x298, 0, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EIM_DA15__GPIO_1_15 IOMUX_PAD(0x634, 0x298, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PIN_EIM_DA15__NANDF_DQS IOMUX_PAD(0x634, 0x298, 2, 0x7B0, 2, PAD_CTL_DSE_HIGH) +#define MX50_PAD_EIM_DA15__EPDC_SDCE9 IOMUX_PAD(0x634, 0x298, 3, 0x0, 0, NO_PAD_CTRL) + +#define MX50_PAD_EIM_CS2__WEIM_CS2 IOMUX_PAD(0x638, 0x29C, 0, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EIM_CS2__GPIO_1_16 IOMUX_PAD(0x638, 0x29C, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EIM_CS2__WEIM_A27 IOMUX_PAD(0x638, 0x29C, 2, 0x0, 0, NO_PAD_CTRL) + +#define MX50_PAD_EIM_CS1__WEIM_CS1 IOMUX_PAD(0x63C, 0x2A0, 0, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EIM_CS1__GPIO_1_17 IOMUX_PAD(0x63C, 0x2A0, 1, 0x0, 0, NO_PAD_CTRL) + +#define MX50_PAD_EIM_CS0__WEIM_CS0 IOMUX_PAD(0x640, 0x2A4, 0, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EIM_CS0__GPIO_1_18 IOMUX_PAD(0x640, 0x2A4, 1, 0x0, 0, NO_PAD_CTRL) + +#define MX50_PAD_EIM_EB0__WEIM_EB0 IOMUX_PAD(0x644, 0x2A8, 0, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EIM_EB0__GPIO_1_19 IOMUX_PAD(0x644, 0x2A8, 1, 0x0, 0, NO_PAD_CTRL) + +#define MX50_PAD_EIM_EB1__WEIM_EB1 IOMUX_PAD(0x648, 0x2AC, 0, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EIM_EB1__GPIO_1_20 IOMUX_PAD(0x648, 0x2AC, 1, 0x0, 0, NO_PAD_CTRL) + +#define MX50_PAD_EIM_WAIT__WEIM_WAIT IOMUX_PAD(0x64C, 0x2B0, 0, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EIM_WAIT__GPIO_1_21 IOMUX_PAD(0x64C, 0x2B0, 1, 0x0, 0, NO_PAD_CTRL) + +#define MX50_PAD_EIM_BCLK__WEIM_BCLK IOMUX_PAD(0x650, 0x2B4, 0, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EIM_BCLK__GPIO_1_22 IOMUX_PAD(0x650, 0x2B4, 1, 0x0, 0, NO_PAD_CTRL) + +#define MX50_PAD_EIM_RDY__WEIM_RDY IOMUX_PAD(0x654, 0x2B8, 0, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EIM_RDY__GPIO_1_23 IOMUX_PAD(0x654, 0x2B8, 1, 0x0, 0, NO_PAD_CTRL) + +#define MX50_PAD_EIM_OE__WEIM_OE IOMUX_PAD(0x658, 0x2BC, 0, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EIM_OE__GPIO_1_24 IOMUX_PAD(0x658, 0x2BC, 1, 0x0, 0, NO_PAD_CTRL) + +#define MX50_PAD_EIM_RW__WEIM_RW IOMUX_PAD(0x65C, 0x2C0, 0, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EIM_RW__GPIO_1_25 IOMUX_PAD(0x65C, 0x2C0, 1, 0x0, 0, NO_PAD_CTRL) + +#define MX50_PAD_EIM_LBA__WEIM_LBA IOMUX_PAD(0x660, 0x2C4, 0, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EIM_LBA__GPIO_1_26 IOMUX_PAD(0x660, 0x2C4, 1, 0x0, 0, NO_PAD_CTRL) + +#define MX50_PAD_EIM_CRE__WEIM_CRE IOMUX_PAD(0x664, 0x2C8, 0, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EIM_CRE__GPIO_1_27 IOMUX_PAD(0x664, 0x2C8, 1, 0x0, 0, NO_PAD_CTRL) + +#endif /* __MACH_IOMUX_MX50_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx51.h b/arch/arm/plat-mxc/include/mach/iomux-mx51.h index d7a41e9a260..b6767f90ef1 100644 --- a/arch/arm/plat-mxc/include/mach/iomux-mx51.h +++ b/arch/arm/plat-mxc/include/mach/iomux-mx51.h @@ -15,373 +15,1553 @@ #include <mach/iomux-v3.h> -/* - * various IOMUX alternate output functions (1-7) - */ -typedef enum iomux_config { - IOMUX_CONFIG_ALT0, - IOMUX_CONFIG_ALT1, - IOMUX_CONFIG_ALT2, - IOMUX_CONFIG_ALT3, - IOMUX_CONFIG_ALT4, - IOMUX_CONFIG_ALT5, - IOMUX_CONFIG_ALT6, - IOMUX_CONFIG_ALT7, - IOMUX_CONFIG_GPIO, /* added to help user use GPIO mode */ - IOMUX_CONFIG_SION = 0x1 << 4, /* LOOPBACK:MUX SION bit */ -} iomux_pin_cfg_t; - /* Pad control groupings */ -#define MX51_UART1_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_PKE | PAD_CTL_PUE | \ - PAD_CTL_DSE_HIGH) -#define MX51_UART2_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | PAD_CTL_DSE_HIGH | \ - PAD_CTL_SRE_FAST) -#define MX51_UART3_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_DSE_HIGH | \ - PAD_CTL_SRE_FAST) +#define MX51_UART_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | PAD_CTL_DSE_HIGH | \ + PAD_CTL_HYS | PAD_CTL_SRE_FAST) #define MX51_I2C_PAD_CTRL (PAD_CTL_SRE_FAST | PAD_CTL_ODE | \ - PAD_CTL_DSE_HIGH | PAD_CTL_PUS_100K_UP | PAD_CTL_HYS) -#define MX51_USBH1_PAD_CTRL (PAD_CTL_SRE_FAST | PAD_CTL_DSE_HIGH | \ - PAD_CTL_PUS_100K_UP | PAD_CTL_PUE | \ - PAD_CTL_PKE | PAD_CTL_HYS) -#define MX51_GPIO_PAD_CTRL (PAD_CTL_DSE_HIGH | PAD_CTL_PKE | \ - PAD_CTL_SRE_FAST) -#define MX51_GPIO_PAD_CTRL_2 (PAD_CTL_SRE_FAST | PAD_CTL_DSE_HIGH | \ - PAD_CTL_PUS_100K_UP) -#define MX51_ECSPI_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_PKE | PAD_CTL_DSE_HIGH | \ - PAD_CTL_SRE_FAST) -#define MX51_SDHCI_PAD_CTRL (PAD_CTL_DSE_HIGH | PAD_CTL_PUS_47K_UP | \ - PAD_CTL_PKE | PAD_CTL_PUE | PAD_CTL_SRE_FAST | \ - PAD_CTL_DVS) + PAD_CTL_DSE_HIGH | PAD_CTL_PUS_100K_UP | \ + PAD_CTL_HYS) +#define MX51_ESDHC_PAD_CTRL (PAD_CTL_SRE_FAST | PAD_CTL_ODE | \ + PAD_CTL_DSE_HIGH | PAD_CTL_PUS_100K_UP | \ + PAD_CTL_HYS) +#define MX51_USBH1_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_SRE_FAST | \ + PAD_CTL_DSE_HIGH | PAD_CTL_PUS_100K_UP | \ + PAD_CTL_HYS | PAD_CTL_PUE) +#define MX51_ECSPI_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_HYS | \ + PAD_CTL_DSE_HIGH | PAD_CTL_SRE_FAST) +#define MX51_SDHCI_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_DSE_HIGH | \ + PAD_CTL_PUS_47K_UP | PAD_CTL_PUE | \ + PAD_CTL_SRE_FAST | PAD_CTL_DVS) +#define MX51_GPIO_PAD_CTRL (PAD_CTL_DSE_HIGH | PAD_CTL_PKE | PAD_CTL_SRE_FAST) -#define MX51_PAD_CTRL_1 (PAD_CTL_SRE_FAST | PAD_CTL_DSE_HIGH | \ - PAD_CTL_PUE | PAD_CTL_PKE | PAD_CTL_HYS) -#define MX51_PAD_CTRL_2 (PAD_CTL_HYS | PAD_CTL_PKE) -#define MX51_PAD_CTRL_3 (PAD_CTL_PKE | PAD_CTL_PUS_100K_UP) -#define MX51_PAD_CTRL_4 (PAD_CTL_DVS | PAD_CTL_HYS | PAD_CTL_PKE) -#define MX51_PAD_CTRL_5 (PAD_CTL_DVS | PAD_CTL_DSE_HIGH) +#define MX51_PAD_CTRL_2 (PAD_CTL_PKE | PAD_CTL_HYS) +#define MX51_PAD_CTRL_3 (PAD_CTL_PKE | PAD_CTL_PUS_100K_UP) +#define MX51_PAD_CTRL_4 (PAD_CTL_PKE | PAD_CTL_DVS | PAD_CTL_HYS) +#define MX51_PAD_CTRL_5 (PAD_CTL_DVS | PAD_CTL_DSE_HIGH) /* * The naming convention for the pad modes is MX51_PAD_<padname>__<padmode> - * If <padname> or <padmode> refers to a GPIO, it is named GPIO_<unit>_<num> + * If <padname> or <padmode> refers to a GPIO, it is named GPIO<unit>_<num> * See also iomux-v3.h */ -/* PAD MUX ALT INPSE PATH PADCTRL */ -#define MX51_PAD_EIM_DA0__EIM_DA0 IOMUX_PAD(0x7a8, 0x01c, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_EIM_DA1__EIM_DA1 IOMUX_PAD(0x7a8, 0x020, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_EIM_DA2__EIM_DA2 IOMUX_PAD(0x7a8, 0x024, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_EIM_DA3__EIM_DA3 IOMUX_PAD(0x7a8, 0x028, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_EIM_DA4__EIM_DA4 IOMUX_PAD(0x7ac, 0x02c, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_EIM_DA5__EIM_DA5 IOMUX_PAD(0x7ac, 0x030, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_EIM_DA6__EIM_DA6 IOMUX_PAD(0x7ac, 0x034, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_EIM_DA7__EIM_DA7 IOMUX_PAD(0x7ac, 0x038, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_EIM_DA8__EIM_DA8 IOMUX_PAD(0x7b0, 0x03c, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_EIM_DA9__EIM_DA9 IOMUX_PAD(0x7b0, 0x040, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_EIM_DA10__EIM_DA10 IOMUX_PAD(0x7b0, 0x044, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_EIM_DA11__EIM_DA11 IOMUX_PAD(0x7b0, 0x048, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_EIM_DA12__EIM_DA12 IOMUX_PAD(0x7bc, 0x04c, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_EIM_DA13__EIM_DA13 IOMUX_PAD(0x7bc, 0x050, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_EIM_DA14__EIM_DA14 IOMUX_PAD(0x7bc, 0x054, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_EIM_DA15__EIM_DA15 IOMUX_PAD(0x7bc, 0x058, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_EIM_D16__GPIO_2_0 IOMUX_PAD(0x3f0, 0x05c, 1, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_EIM_D16__I2C1_SDA IOMUX_PAD(0x3f0, 0x05c, (4 | IOMUX_CONFIG_SION), \ - 0x09b4, 0, MX51_I2C_PAD_CTRL) -#define MX51_PAD_EIM_D17__GPIO_2_1 IOMUX_PAD(0x3f4, 0x060, 1, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_EIM_D18__GPIO_2_2 IOMUX_PAD(0x3f8, 0x064, 1, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_EIM_D19__GPIO_2_3 IOMUX_PAD(0x3fc, 0x068, 1, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_EIM_D19__I2C1_SCL IOMUX_PAD(0x3fc, 0x068, (4 | IOMUX_CONFIG_SION), \ - 0x09b0, 0, MX51_I2C_PAD_CTRL) -#define MX51_PAD_EIM_D20__GPIO_2_4 IOMUX_PAD(0x400, 0x06c, 1, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_EIM_D21__GPIO_2_5 IOMUX_PAD(0x404, 0x070, 1, 0x0, 0, MX51_GPIO_PAD_CTRL) -#define MX51_PAD_EIM_D22__GPIO_2_6 IOMUX_PAD(0x408, 0x074, 1, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_EIM_D23__GPIO_2_7 IOMUX_PAD(0x40c, 0x078, 1, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_EIM_D24__UART3_CTS IOMUX_PAD(0x410, 0x07c, 3, 0x0, 0, MX51_UART3_PAD_CTRL) -#define MX51_PAD_EIM_D25__UART3_RXD IOMUX_PAD(0x414, 0x080, 3, 0x9f4, 0, MX51_UART3_PAD_CTRL) -#define MX51_PAD_EIM_D25__UART2_CTS IOMUX_PAD(0x414, 0x080, 4, 0x0, 0, MX51_UART2_PAD_CTRL) -#define MX51_PAD_EIM_D26__UART3_TXD IOMUX_PAD(0x418, 0x084, 3, 0x0, 0, MX51_UART3_PAD_CTRL) -#define MX51_PAD_EIM_D26__UART2_RTS IOMUX_PAD(0x418, 0x084, 4, 0x9e8, 3, MX51_UART2_PAD_CTRL) -#define MX51_PAD_EIM_D27__UART3_RTS IOMUX_PAD(0x41c, 0x088, 3, 0x9f0, 3, MX51_UART3_PAD_CTRL) -#define MX51_PAD_EIM_D28__EIM_D28 IOMUX_PAD(0x420, 0x08c, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_EIM_D29__EIM_D29 IOMUX_PAD(0x424, 0x090, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_EIM_D30__EIM_D30 IOMUX_PAD(0x428, 0x094, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_EIM_D31__EIM_D31 IOMUX_PAD(0x42c, 0x09c, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_EIM_A16__GPIO_2_10 IOMUX_PAD(0x430, 0x09c, 1, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_EIM_A17__GPIO_2_11 IOMUX_PAD(0x434, 0x0a0, 1, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_EIM_A18__GPIO_2_12 IOMUX_PAD(0x438, 0x0a4, 1, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_EIM_A19__GPIO_2_13 IOMUX_PAD(0x43c, 0x0a8, 1, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_EIM_A20__GPIO_2_14 IOMUX_PAD(0x440, 0x0ac, 1, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_EIM_A21__GPIO_2_15 IOMUX_PAD(0x444, 0x0b0, 1, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_EIM_A22__GPIO_2_16 IOMUX_PAD(0x448, 0x0b4, 1, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_EIM_A23__GPIO_2_17 IOMUX_PAD(0x44c, 0x0b8, 1, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_EIM_A24__GPIO_2_18 IOMUX_PAD(0x450, 0x0bc, 1, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_EIM_A25__GPIO_2_19 IOMUX_PAD(0x454, 0x0c0, 1, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_EIM_A26__GPIO_2_20 IOMUX_PAD(0x458, 0x0c4, 1, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_EIM_A27__GPIO_2_21 IOMUX_PAD(0x45c, 0x0c8, 1, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_EIM_EB0__EIM_EB0 IOMUX_PAD(0x460, 0x0cc, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_EIM_EB1__EIM_EB1 IOMUX_PAD(0x464, 0x0d0, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_EIM_EB2__GPIO_2_22 IOMUX_PAD(0x468, 0x0d4, 1, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_EIM_EB2__FEC_MDIO IOMUX_PAD(0x468, 0x0d4, 3, 0x0, 0, MX51_PAD_CTRL_1 | PAD_CTL_PUS_22K_UP) -#define MX51_PAD_EIM_EB3__GPIO_2_23 IOMUX_PAD(0x46c, 0x0d8, 1, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_EIM_EB3__FEC_RDAT1 IOMUX_PAD(0x46c, 0x0d8, 3, 0x0, 0, MX51_PAD_CTRL_2) -#define MX51_PAD_EIM_OE__GPIO_2_24 IOMUX_PAD(0x470, 0x0dc, 1, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_EIM_CS0__GPIO_2_25 IOMUX_PAD(0x474, 0x0e0, 1, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_EIM_CS1__GPIO_2_26 IOMUX_PAD(0x478, 0x0e4, 1, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_EIM_CS2__GPIO_2_27 IOMUX_PAD(0x47c, 0x0e8, 1, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_EIM_CS2__FEC_RDAT2 IOMUX_PAD(0x47c, 0x0e8, 3, 0x0, 0, MX51_PAD_CTRL_2) -#define MX51_PAD_EIM_CS3__GPIO_2_28 IOMUX_PAD(0x480, 0x0ec, 1, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_EIM_CS3__FEC_RDAT3 IOMUX_PAD(0x480, 0x0ec, 3, 0x0, 0, MX51_PAD_CTRL_2) -#define MX51_PAD_EIM_CS4__GPIO_2_29 IOMUX_PAD(0x484, 0x0f0, 1, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_EIM_CS4__FEC_RX_ER IOMUX_PAD(0x484, 0x0f0, 3, 0x0, 0, MX51_PAD_CTRL_2) -#define MX51_PAD_EIM_CS5__GPIO_2_30 IOMUX_PAD(0x488, 0x0f4, 1, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_EIM_CS5__FEC_CRS IOMUX_PAD(0x488, 0x0f4, 3, 0x0, 0, MX51_PAD_CTRL_2) -#define MX51_PAD_EIM_DTACK__GPIO_2_31 IOMUX_PAD(0x48c, 0x0f8, 1, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_EIM_LBA__GPIO_3_1 IOMUX_PAD(0x494, 0x0FC, 1, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_EIM_CRE__GPIO_3_2 IOMUX_PAD(0x4A0, 0x100, 1, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_DRAM_CS1__DRAM_CS1 IOMUX_PAD(0x4D0, 0x104, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_NANDF_WE_B__GPIO_3_3 IOMUX_PAD(0x4E4, 0x108, 3, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_NANDF_RE_B__GPIO_3_4 IOMUX_PAD(0x4E8, 0x10C, 3, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_NANDF_ALE__GPIO_3_5 IOMUX_PAD(0x4EC, 0x110, 3, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_NANDF_CLE__GPIO_3_6 IOMUX_PAD(0x4F0, 0x114, 3, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_NANDF_WP_B__GPIO_3_7 IOMUX_PAD(0x4F4, 0x118, 3, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_NANDF_RB0__GPIO_3_8 IOMUX_PAD(0x4F8, 0x11C, 3, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_NANDF_RB1__GPIO_3_9 IOMUX_PAD(0x4FC, 0x120, 3, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_NANDF_RB2__GPIO_3_10 IOMUX_PAD(0x500, 0x124, 3, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_NANDF_RB2__ECSPI2_SCLK IOMUX_PAD(0x500, 0x124, 2, 0x0, 0, MX51_ECSPI_PAD_CTRL) -#define MX51_PAD_NANDF_RB2__FEC_COL IOMUX_PAD(0x500, 0x124, 1, 0x0, 0, MX51_PAD_CTRL_2) -#define MX51_PAD_NANDF_RB3__GPIO_3_11 IOMUX_PAD(0x504, 0x128, 3, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_NANDF_RB3__ECSPI2_MISO IOMUX_PAD(0x504, 0x128, 2, 0x0, 0, MX51_ECSPI_PAD_CTRL) -#define MX51_PAD_NANDF_RB3__FEC_RXCLK IOMUX_PAD(0x504, 0x128, 1, 0x0, 0, MX51_PAD_CTRL_2) -#define MX51_PAD_NANDF_RB6__FEC_RDAT0 IOMUX_PAD(0x5DC, 0x134, 1, 0x0, 0, MX51_PAD_CTRL_4) -#define MX51_PAD_NANDF_RB7__FEC_TDAT0 IOMUX_PAD(0x5E0, 0x138, 1, 0x0, 0, MX51_PAD_CTRL_5) -#define MX51_PAD_GPIO_NAND__GPIO_3_12 IOMUX_PAD(0x514, 0x12C, 3, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_NANDF_CS0__GPIO_3_16 IOMUX_PAD(0x518, 0x130, 3, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_NANDF_CS1__GPIO_3_17 IOMUX_PAD(0x51C, 0x134, 3, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_NANDF_CS2__GPIO_3_18 IOMUX_PAD(0x520, 0x138, 3, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_NANDF_CS2__FEC_TX_ER IOMUX_PAD(0x520, 0x138, 2, 0x0, 0, MX51_PAD_CTRL_5) -#define MX51_PAD_NANDF_CS3__GPIO_3_19 IOMUX_PAD(0x524, 0x13C, 3, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_NANDF_CS3__FEC_MDC IOMUX_PAD(0x524, 0x13C, 2, 0x0, 0, MX51_PAD_CTRL_5) -#define MX51_PAD_NANDF_CS4__GPIO_3_20 IOMUX_PAD(0x528, 0x140, 3, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_NANDF_CS4__FEC_TDAT1 IOMUX_PAD(0x528, 0x140, 2, 0x0, 0, MX51_PAD_CTRL_5) -#define MX51_PAD_NANDF_CS5__GPIO_3_21 IOMUX_PAD(0x52C, 0x144, 3, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_NANDF_CS5__FEC_TDAT2 IOMUX_PAD(0x52C, 0x144, 2, 0x0, 0, MX51_PAD_CTRL_5) -#define MX51_PAD_NANDF_CS6__GPIO_3_22 IOMUX_PAD(0x530, 0x148, 3, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_NANDF_CS6__FEC_TDAT3 IOMUX_PAD(0x530, 0x148, 2, 0x0, 0, MX51_PAD_CTRL_5) -#define MX51_PAD_NANDF_CS7__GPIO_3_23 IOMUX_PAD(0x534, 0x14C, 3, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_NANDF_CS7__FEC_TX_EN IOMUX_PAD(0x534, 0x14C, 1, 0x0, 0, MX51_PAD_CTRL_5) -#define MX51_PAD_NANDF_RDY_INT__GPIO_3_24 IOMUX_PAD(0x538, 0x150, 3, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_NANDF_RDY_INT__FEC_TX_CLK IOMUX_PAD(0x538, 0x150, 1, 0x0, 0, MX51_PAD_CTRL_4) -#define MX51_PAD_NANDF_D15__GPIO_3_25 IOMUX_PAD(0x53C, 0x154, 3, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_NANDF_D15__ECSPI2_MOSI IOMUX_PAD(0x53C, 0x154, 2, 0x0, 0, MX51_ECSPI_PAD_CTRL) -#define MX51_PAD_NANDF_D14__GPIO_3_26 IOMUX_PAD(0x540, 0x158, 3, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_NANDF_D13__GPIO_3_27 IOMUX_PAD(0x544, 0x15C, 3, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_NANDF_D12__GPIO_3_28 IOMUX_PAD(0x548, 0x160, 3, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_NANDF_D11__GPIO_3_29 IOMUX_PAD(0x54C, 0x164, 3, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_NANDF_D10__GPIO_3_30 IOMUX_PAD(0x550, 0x168, 3, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_NANDF_D9__GPIO_3_31 IOMUX_PAD(0x554, 0x16C, 3, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_NANDF_D8__GPIO_4_0 IOMUX_PAD(0x558, 0x170, 3, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_NANDF_D7__GPIO_4_1 IOMUX_PAD(0x55C, 0x174, 3, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_NANDF_D6__GPIO_4_2 IOMUX_PAD(0x560, 0x178, 3, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_NANDF_D5__GPIO_4_3 IOMUX_PAD(0x564, 0x17C, 3, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_NANDF_D4__GPIO_4_4 IOMUX_PAD(0x568, 0x180, 3, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_NANDF_D3__GPIO_4_5 IOMUX_PAD(0x56C, 0x184, 3, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_NANDF_D2__GPIO_4_6 IOMUX_PAD(0x570, 0x188, 3, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_NANDF_D1__GPIO_4_7 IOMUX_PAD(0x574, 0x18C, 3, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_NANDF_D0__GPIO_4_8 IOMUX_PAD(0x578, 0x190, 3, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_CSI1_D8__GPIO_3_12 IOMUX_PAD(0x57C, 0x194, 3, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_CSI1_D9__GPIO_3_13 IOMUX_PAD(0x580, 0x198, 3, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_CSI1_D10__CSI1_D10 IOMUX_PAD(0x584, 0x19C, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_CSI1_D11__CSI1_D11 IOMUX_PAD(0x588, 0x1A0, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_CSI1_D12__CSI1_D12 IOMUX_PAD(0x58C, 0x1A4, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_CSI1_D13__CSI1_D13 IOMUX_PAD(0x590, 0x1A8, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_CSI1_D14__CSI1_D14 IOMUX_PAD(0x594, 0x1AC, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_CSI1_D15__CSI1_D15 IOMUX_PAD(0x598, 0x1B0, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_CSI1_D16__CSI1_D16 IOMUX_PAD(0x59C, 0x1B4, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_CSI1_D17__CSI1_D17 IOMUX_PAD(0x5A0, 0x1B8, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_CSI1_D18__CSI1_D18 IOMUX_PAD(0x5A4, 0x1BC, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_CSI1_D19__CSI1_D19 IOMUX_PAD(0x5A8, 0x1C0, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_CSI1_VSYNC__CSI1_VSYNC IOMUX_PAD(0x5AC, 0x1C4, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_CSI1_HSYNC__CSI1_HSYNC IOMUX_PAD(0x5B0, 0x1C8, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_CSI1_PIXCLK__CSI1_PIXCLK IOMUX_PAD(0x5B4, 0x000, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_CSI1_MCLK__CSI1_MCLK IOMUX_PAD(0x5B8, 0x000, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_CSI1_PKE0__CSI1_PKE0 IOMUX_PAD(0x860, 0x000, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_CSI2_D12__GPIO_4_9 IOMUX_PAD(0x5BC, 0x1CC, 3, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_CSI2_D13__GPIO_4_10 IOMUX_PAD(0x5C0, 0x1D0, 3, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_CSI2_D14__GPIO_4_11 IOMUX_PAD(0x5C4, 0x1D4, 3, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_CSI2_D15__GPIO_4_12 IOMUX_PAD(0x5C8, 0x1D8, 3, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_CSI2_D16__GPIO_4_11 IOMUX_PAD(0x5CC, 0x1DC, 3, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_CSI2_D17__GPIO_4_12 IOMUX_PAD(0x5D0, 0x1E0, 3, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_CSI2_D18__GPIO_4_11 IOMUX_PAD(0x5D4, 0x1E4, 3, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_CSI2_D19__GPIO_4_12 IOMUX_PAD(0x5D8, 0x1E8, 3, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_CSI2_VSYNC__GPIO_4_13 IOMUX_PAD(0x5DC, 0x1EC, 3, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_CSI2_HSYNC__GPIO_4_14 IOMUX_PAD(0x5E0, 0x1F0, 3, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_CSI2_PIXCLK__GPIO_4_15 IOMUX_PAD(0x5E4, 0x1F4, 3, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_I2C1_CLK__GPIO_4_16 IOMUX_PAD(0x5E8, 0x1F8, 3, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_I2C1_CLK__HSI2C_CLK IOMUX_PAD(0x5E8, 0x1F8, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_I2C1_DAT__GPIO_4_17 IOMUX_PAD(0x5EC, 0x1FC, 3, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_I2C1_DAT__HSI2C_DAT IOMUX_PAD(0x5EC, 0x1FC, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_AUD3_BB_TXD__AUD3_BB_TXD IOMUX_PAD(0x5F0, 0x200, IOMUX_CONFIG_SION, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_AUD3_BB_TXD__GPIO_4_18 IOMUX_PAD(0x5F0, 0x200, 3, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_AUD3_BB_RXD__AUD3_BB_RXD IOMUX_PAD(0x5F4, 0x204, IOMUX_CONFIG_SION, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_AUD3_BB_RXD__GPIO_4_19 IOMUX_PAD(0x5F4, 0x204, 3, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_AUD3_BB_CK__AUD3_BB_CK IOMUX_PAD(0x5F8, 0x208, IOMUX_CONFIG_SION, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_AUD3_BB_CK__GPIO_4_20 IOMUX_PAD(0x5F8, 0x208, 3, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_AUD3_BB_FS__AUD3_BB_FS IOMUX_PAD(0x5FC, 0x20C, IOMUX_CONFIG_SION, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_AUD3_BB_FS__GPIO_4_21 IOMUX_PAD(0x5FC, 0x20C, 3, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI IOMUX_PAD(0x600, 0x210, 0, 0x0, 0, MX51_ECSPI_PAD_CTRL) -#define MX51_PAD_CSPI1_MOSI__GPIO_4_22 IOMUX_PAD(0x600, 0x210, 3, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_CSPI1_MISO__ECSPI1_MISO IOMUX_PAD(0x604, 0x214, 0, 0x0, 0, MX51_ECSPI_PAD_CTRL) -#define MX51_PAD_CSPI1_MISO__GPIO_4_23 IOMUX_PAD(0x604, 0x214, 3, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_CSPI1_SS0__ECSPI1_SS0 IOMUX_PAD(0x608, 0x218, 0, 0x0, 0, MX51_ECSPI_PAD_CTRL) -#define MX51_PAD_CSPI1_SS0__GPIO_4_24 IOMUX_PAD(0x608, 0x218, 3, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_CSPI1_SS1__ECSPI1_SS1 IOMUX_PAD(0x60C, 0x21C, 0, 0x0, 0, MX51_ECSPI_PAD_CTRL) -#define MX51_PAD_CSPI1_SS1__GPIO_4_25 IOMUX_PAD(0x60C, 0x21C, 3, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_CSPI1_RDY__ECSPI1_RDY IOMUX_PAD(0x610, 0x220, 0, 0x0, 0, MX51_ECSPI_PAD_CTRL) -#define MX51_PAD_CSPI1_RDY__GPIO_4_26 IOMUX_PAD(0x610, 0x220, 3, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK IOMUX_PAD(0x614, 0x224, 0, 0x0, 0, MX51_ECSPI_PAD_CTRL) -#define MX51_PAD_CSPI1_SCLK__GPIO_4_27 IOMUX_PAD(0x614, 0x224, 3, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_UART1_RXD__UART1_RXD IOMUX_PAD(0x618, 0x228, 0, 0x9e4, 0, MX51_UART1_PAD_CTRL | PAD_CTL_SRE_FAST) -#define MX51_PAD_UART1_TXD__UART1_TXD IOMUX_PAD(0x61C, 0x22C, 0, 0x0, 0, MX51_UART1_PAD_CTRL | PAD_CTL_SRE_FAST) -#define MX51_PAD_UART1_RTS__UART1_RTS IOMUX_PAD(0x620, 0x230, 0, 0x9e0, 0, MX51_UART1_PAD_CTRL) -#define MX51_PAD_UART1_CTS__UART1_CTS IOMUX_PAD(0x624, 0x234, 0, 0x0, 0, MX51_UART1_PAD_CTRL) -#define MX51_PAD_UART2_RXD__UART2_RXD IOMUX_PAD(0x628, 0x238, 0, 0x9ec, 2, MX51_UART2_PAD_CTRL) -#define MX51_PAD_UART2_TXD__UART2_TXD IOMUX_PAD(0x62C, 0x23C, 0, 0x0, 0, MX51_UART2_PAD_CTRL) -#define MX51_PAD_UART3_RXD__UART3_RXD IOMUX_PAD(0x630, 0x240, 1, 0x9f4, 4, MX51_UART3_PAD_CTRL) -#define MX51_PAD_UART3_RXD__GPIO_1_22 IOMUX_PAD(0x630, 0x240, 3, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_UART3_TXD__UART3_TXD IOMUX_PAD(0x634, 0x244, 1, 0x0, 0, MX51_UART3_PAD_CTRL) -#define MX51_PAD_UART3_TXD__GPIO_1_23 IOMUX_PAD(0x634, 0x244, 3, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_OWIRE_LINE__GPIO_1_24 IOMUX_PAD(0x638, 0x248, 3, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_KEY_ROW0__KEY_ROW0 IOMUX_PAD(0x63C, 0x24C, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_KEY_ROW1__KEY_ROW1 IOMUX_PAD(0x640, 0x250, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_KEY_ROW2__KEY_ROW2 IOMUX_PAD(0x644, 0x254, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_KEY_ROW3__KEY_ROW3 IOMUX_PAD(0x648, 0x258, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_KEY_COL0__KEY_COL0 IOMUX_PAD(0x64C, 0x25C, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_KEY_COL1__KEY_COL1 IOMUX_PAD(0x650, 0x260, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_KEY_COL2__KEY_COL2 IOMUX_PAD(0x654, 0x264, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_KEY_COL3__KEY_COL3 IOMUX_PAD(0x658, 0x268, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_KEY_COL4__KEY_COL4 IOMUX_PAD(0x65C, 0x26C, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_KEY_COL4__UART3_RTS IOMUX_PAD(0x65C, 0x26C, 2, 0x9f0, 4, MX51_UART3_PAD_CTRL) -#define MX51_PAD_KEY_COL4__I2C2_SCL IOMUX_PAD(0x65C, 0x26C, (3 | IOMUX_CONFIG_SION), \ - 0x09b8, 1, MX51_I2C_PAD_CTRL) -#define MX51_PAD_KEY_COL5__KEY_COL5 IOMUX_PAD(0x660, 0x270, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_KEY_COL5__UART3_CTS IOMUX_PAD(0x660, 0x270, 2, 0, 0, MX51_UART3_PAD_CTRL) -#define MX51_PAD_KEY_COL5__I2C2_SDA IOMUX_PAD(0x660, 0x270, (3 | IOMUX_CONFIG_SION), \ - 0x09bc, 1, MX51_I2C_PAD_CTRL) -#define MX51_PAD_USBH1_CLK__USBH1_CLK IOMUX_PAD(0x678, 0x278, 0, 0x0, 0, MX51_USBH1_PAD_CTRL) -#define MX51_PAD_USBH1_DIR__USBH1_DIR IOMUX_PAD(0x67C, 0x27C, 0, 0x0, 0, MX51_USBH1_PAD_CTRL) -#define MX51_PAD_USBH1_STP__USBH1_STP IOMUX_PAD(0x680, 0x280, 0, 0x0, 0, MX51_USBH1_PAD_CTRL) -#define MX51_PAD_USBH1_STP__GPIO_1_27 IOMUX_PAD(0x680, 0x280, 2, 0x0, 0, MX51_USBH1_PAD_CTRL) -#define MX51_PAD_USBH1_NXT__USBH1_NXT IOMUX_PAD(0x684, 0x284, 0, 0x0, 0, MX51_USBH1_PAD_CTRL) -#define MX51_PAD_USBH1_DATA0__USBH1_DATA0 IOMUX_PAD(0x688, 0x288, 0, 0x0, 0, MX51_USBH1_PAD_CTRL) -#define MX51_PAD_USBH1_DATA1__USBH1_DATA1 IOMUX_PAD(0x68C, 0x28C, 0, 0x0, 0, MX51_USBH1_PAD_CTRL) -#define MX51_PAD_USBH1_DATA2__USBH1_DATA2 IOMUX_PAD(0x690, 0x290, 0, 0x0, 0, MX51_USBH1_PAD_CTRL) -#define MX51_PAD_USBH1_DATA3__USBH1_DATA3 IOMUX_PAD(0x694, 0x294, 0, 0x0, 0, MX51_USBH1_PAD_CTRL) -#define MX51_PAD_USBH1_DATA4__USBH1_DATA4 IOMUX_PAD(0x698, 0x298, 0, 0x0, 0, MX51_USBH1_PAD_CTRL) -#define MX51_PAD_USBH1_DATA5__USBH1_DATA5 IOMUX_PAD(0x69C, 0x29C, 0, 0x0, 0, MX51_USBH1_PAD_CTRL) -#define MX51_PAD_USBH1_DATA6__USBH1_DATA6 IOMUX_PAD(0x6A0, 0x2A0, 0, 0x0, 0, MX51_USBH1_PAD_CTRL) -#define MX51_PAD_USBH1_DATA7__USBH1_DATA7 IOMUX_PAD(0x6A4, 0x2A4, 0, 0x0, 0, MX51_USBH1_PAD_CTRL) -#define MX51_PAD_DI1_PIN11__GPIO_3_0 IOMUX_PAD(0x6A8, 0x2A8, 4, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_DI1_PIN12__GPIO_3_1 IOMUX_PAD(0x6AC, 0x2AC, 4, 0x978, 1, NO_PAD_CTRL) -#define MX51_PAD_DI1_PIN13__GPIO_3_2 IOMUX_PAD(0x6B0, 0x2B0, 4, 0x97c, 1, NO_PAD_CTRL) -#define MX51_PAD_DI1_D0_CS__GPIO_3_3 IOMUX_PAD(0x6B4, 0x2B4, 4, 0x980, 1, NO_PAD_CTRL) -#define MX51_PAD_DI1_D1_CS__GPIO_3_4 IOMUX_PAD(0x6B8, 0x2B8, 4, 0x984, 1, NO_PAD_CTRL) -#define MX51_PAD_DISPB2_SER_DIN__GPIO_3_5 IOMUX_PAD(0x6BC, 0x2BC, 4, 0x988, 1, NO_PAD_CTRL) -#define MX51_PAD_DISPB2_SER_DIO__GPIO_3_6 IOMUX_PAD(0x6C0, 0x2C0, 4, 0x98c, 1, NO_PAD_CTRL) -#define MX51_PAD_DISPB2_SER_CLK__GPIO_3_7 IOMUX_PAD(0x6C4, 0x2C4, 4, 0x990, 1, NO_PAD_CTRL) -#define MX51_PAD_DISPB2_SER_RS__GPIO_3_8 IOMUX_PAD(0x6C8, 0x2C8, 4, 0x994, 1, NO_PAD_CTRL) -#define MX51_PAD_DISP1_DAT0__DISP1_DAT0 IOMUX_PAD(0x6CC, 0x2CC, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_DISP1_DAT1__DISP1_DAT1 IOMUX_PAD(0x6D0, 0x2D0, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_DISP1_DAT2__DISP1_DAT2 IOMUX_PAD(0x6D4, 0x2D4, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_DISP1_DAT3__DISP1_DAT3 IOMUX_PAD(0x6D8, 0x2D8, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_DISP1_DAT4__DISP1_DAT4 IOMUX_PAD(0x6DC, 0x2DC, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_DISP1_DAT5__DISP1_DAT5 IOMUX_PAD(0x6E0, 0x2E0, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_DISP1_DAT6__DISP1_DAT6 IOMUX_PAD(0x6E4, 0x2E4, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_DISP1_DAT7__DISP1_DAT7 IOMUX_PAD(0x6E8, 0x2E8, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_DISP1_DAT8__DISP1_DAT8 IOMUX_PAD(0x6EC, 0x2EC, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_DISP1_DAT9__DISP1_DAT9 IOMUX_PAD(0x6F0, 0x2F0, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_DISP1_DAT10__DISP1_DAT10 IOMUX_PAD(0x6F4, 0x2F4, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_DISP1_DAT11__DISP1_DAT11 IOMUX_PAD(0x6F8, 0x2F8, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_DISP1_DAT12__DISP1_DAT12 IOMUX_PAD(0x6FC, 0x2FC, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_DISP1_DAT13__DISP1_DAT13 IOMUX_PAD(0x700, 0x300, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_DISP1_DAT14__DISP1_DAT14 IOMUX_PAD(0x704, 0x304, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_DISP1_DAT15__DISP1_DAT15 IOMUX_PAD(0x708, 0x308, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_DISP1_DAT16__DISP1_DAT16 IOMUX_PAD(0x70C, 0x30C, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_DISP1_DAT17__DISP1_DAT17 IOMUX_PAD(0x710, 0x310, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_DISP1_DAT18__DISP1_DAT18 IOMUX_PAD(0x714, 0x314, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_DISP1_DAT19__DISP1_DAT19 IOMUX_PAD(0x718, 0x318, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_DISP1_DAT20__DISP1_DAT20 IOMUX_PAD(0x71C, 0x31C, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_DISP1_DAT21__DISP1_DAT21 IOMUX_PAD(0x720, 0x320, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_DISP1_DAT22__DISP1_DAT22 IOMUX_PAD(0x724, 0x324, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_DISP1_DAT23__DISP1_DAT23 IOMUX_PAD(0x728, 0x328, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_DI1_PIN3__DI1_PIN3 IOMUX_PAD(0x72C, 0x32C, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_DI1_PIN2__DI1_PIN2 IOMUX_PAD(0x734, 0x330, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_DI_GP1__DI_GP1 IOMUX_PAD(0x73C, 0x334, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_DI_GP2__DI_GP2 IOMUX_PAD(0x740, 0x338, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_DI_GP3__DI_GP3 IOMUX_PAD(0x744, 0x33C, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_DI2_PIN4__DI2_PIN4 IOMUX_PAD(0x748, 0x340, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_DI2_PIN2__DI2_PIN2 IOMUX_PAD(0x74C, 0x344, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_DI2_PIN3__DI2_PIN3 IOMUX_PAD(0x750, 0x348, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_DI2_DISP_CLK__DI2_DISP_CLK IOMUX_PAD(0x754, 0x34C, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_DI_GP4__DI_GP4 IOMUX_PAD(0x758, 0x350, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_DISP2_DAT0__DISP2_DAT0 IOMUX_PAD(0x75C, 0x354, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_DISP2_DAT1__DISP2_DAT1 IOMUX_PAD(0x760, 0x358, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_DISP2_DAT2__DISP2_DAT2 IOMUX_PAD(0x764, 0x35C, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_DISP2_DAT3__DISP2_DAT3 IOMUX_PAD(0x768, 0x360, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_DISP2_DAT4__DISP2_DAT4 IOMUX_PAD(0x76C, 0x364, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_DISP2_DAT5__DISP2_DAT5 IOMUX_PAD(0x770, 0x368, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_DISP2_DAT6__GPIO_1_19 IOMUX_PAD(0x774, 0x36C, 5, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_DISP2_DAT7__GPIO_1_29 IOMUX_PAD(0x778, 0x370, 5, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_DISP2_DAT8__GPIO_1_30 IOMUX_PAD(0x77C, 0x374, 5, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_DISP2_DAT9__GPIO_1_31 IOMUX_PAD(0x780, 0x378, 5, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_DISP2_DAT10__DISP2_DAT10 IOMUX_PAD(0x784, 0x37C, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_DISP2_DAT11__DISP2_DAT11 IOMUX_PAD(0x788, 0x380, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_DISP2_DAT12__DISP2_DAT12 IOMUX_PAD(0x78C, 0x384, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_DISP2_DAT13__DISP2_DAT13 IOMUX_PAD(0x790, 0x388, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_DISP2_DAT14__DISP2_DAT14 IOMUX_PAD(0x794, 0x38C, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_DISP2_DAT15__DISP2_DAT15 IOMUX_PAD(0x798, 0x390, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_SD1_CMD__SD1_CMD IOMUX_PAD(0x79C, 0x394, IOMUX_CONFIG_SION, 0x0, 0, \ - MX51_SDHCI_PAD_CTRL) -#define MX51_PAD_SD1_CMD__AUD5_RXFS IOMUX_PAD(0x79C, 0x394, 1, 0x8e0, 1, NO_PAD_CTRL) -#define MX51_PAD_SD1_CLK__SD1_CLK IOMUX_PAD(0x7A0, 0x398, IOMUX_CONFIG_SION, 0x0, 0, \ - MX51_SDHCI_PAD_CTRL | PAD_CTL_HYS) -#define MX51_PAD_SD1_CLK__AUD5_RXC IOMUX_PAD(0x7A0, 0x398, 1, 0x8dc, 1, NO_PAD_CTRL) -#define MX51_PAD_SD1_DATA0__SD1_DATA0 IOMUX_PAD(0x7A4, 0x39C, IOMUX_CONFIG_SION, 0x0, 0, \ - MX51_SDHCI_PAD_CTRL) -#define MX51_PAD_SD1_DATA0__AUD5_TXD IOMUX_PAD(0x7A4, 0x39C, 1, 0x8d8, 2, NO_PAD_CTRL) -#define MX51_PAD_SD1_DATA1__SD1_DATA1 IOMUX_PAD(0x7A8, 0x3A0, IOMUX_CONFIG_SION, 0x0, 0, \ - MX51_SDHCI_PAD_CTRL) -#define MX51_PAD_SD1_DATA1__AUD5_RXD IOMUX_PAD(0x7A8, 0x3A0, 1, 0x8d4, 2, NO_PAD_CTRL) -#define MX51_PAD_SD1_DATA2__SD1_DATA2 IOMUX_PAD(0x7AC, 0x3A4, IOMUX_CONFIG_SION, 0x0, 0, \ - MX51_SDHCI_PAD_CTRL) -#define MX51_PAD_SD1_DATA2__AUD5_TXC IOMUX_PAD(0x7AC, 0x3A4, 1, 0x8e4, 2, NO_PAD_CTRL) -#define MX51_PAD_SD1_DATA3__SD1_DATA3 IOMUX_PAD(0x7B0, 0x3A8, IOMUX_CONFIG_SION, 0x0, 0, \ - MX51_SDHCI_PAD_CTRL) -#define MX51_PAD_SD1_DATA3__AUD5_TXFS IOMUX_PAD(0x7B0, 0x3A8, 1, 0x8e8, 2, NO_PAD_CTRL) -#define MX51_PAD_SD2_CMD__SD2_CMD IOMUX_PAD(0x7BC, 0x3B4, IOMUX_CONFIG_SION, 0x0, 1, \ - MX51_SDHCI_PAD_CTRL) -#define MX51_PAD_SD2_CLK__SD2_CLK IOMUX_PAD(0x7C0, 0x3B8, IOMUX_CONFIG_SION, 0x0, 0, \ - MX51_SDHCI_PAD_CTRL | PAD_CTL_HYS) -#define MX51_PAD_SD2_DATA0__SD2_DATA0 IOMUX_PAD(0x7C4, 0x3BC, IOMUX_CONFIG_SION, 0x0, 0, \ - MX51_SDHCI_PAD_CTRL) -#define MX51_PAD_SD2_DATA1__SD2_DATA1 IOMUX_PAD(0x7C8, 0x3C0, IOMUX_CONFIG_SION, 0x0, 0, \ - MX51_SDHCI_PAD_CTRL) -#define MX51_PAD_SD2_DATA2__SD2_DATA2 IOMUX_PAD(0x7CC, 0x3C4, IOMUX_CONFIG_SION, 0x0, 0, \ - MX51_SDHCI_PAD_CTRL) -#define MX51_PAD_SD2_DATA3__SD2_DATA3 IOMUX_PAD(0x7D0, 0x3C8, IOMUX_CONFIG_SION, 0x0, 0, \ - MX51_SDHCI_PAD_CTRL) -#define MX51_PAD_GPIO_1_0__GPIO_1_0 IOMUX_PAD(0x7B4, 0x3AC, 1, 0x0, 0, MX51_GPIO_PAD_CTRL) -#define MX51_PAD_GPIO_1_1__GPIO_1_1 IOMUX_PAD(0x7B8, 0x3B0, 1, 0x0, 0, MX51_GPIO_PAD_CTRL) -#define MX51_PAD_GPIO_1_2__GPIO_1_2 IOMUX_PAD(0x7D4, 0x3CC, 1, 0x0, 0, MX51_GPIO_PAD_CTRL) -#define MX51_PAD_GPIO_1_2__I2C2_SCL IOMUX_PAD(0x7D4, 0x3CC, (2 | IOMUX_CONFIG_SION), \ - 0x9b8, 3, MX51_I2C_PAD_CTRL) -#define MX51_PAD_GPIO_1_3__GPIO_1_3 IOMUX_PAD(0x7D8, 0x3D0, 1, 0x0, 0, MX51_GPIO_PAD_CTRL) -#define MX51_PAD_GPIO_1_3__I2C2_SDA IOMUX_PAD(0x7D8, 0x3D0, (2 | IOMUX_CONFIG_SION), \ - 0x9bc, 3, MX51_I2C_PAD_CTRL) -#define MX51_PAD_PMIC_INT_REQ__PMIC_INT_REQ IOMUX_PAD(0x7FC, 0x3D4, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_1_4__GPIO_1_4 IOMUX_PAD(0x804, 0x3D8, 1, 0x0, 0, MX51_GPIO_PAD_CTRL) -#define MX51_PAD_GPIO_1_5__GPIO_1_5 IOMUX_PAD(0x808, 0x3DC, 1, 0x0, 0, MX51_GPIO_PAD_CTRL) -#define MX51_PAD_GPIO_1_6__GPIO_1_6 IOMUX_PAD(0x80C, 0x3E0, 1, 0x0, 0, MX51_GPIO_PAD_CTRL) -#define MX51_PAD_GPIO_1_7__GPIO_1_7 IOMUX_PAD(0x810, 0x3E4, 1, 0x0, 0, MX51_GPIO_PAD_CTRL) -#define MX51_PAD_GPIO_1_8__GPIO_1_8 IOMUX_PAD(0x814, 0x3E8, 1, 0x0, 0, MX51_GPIO_PAD_CTRL) -#define MX51_PAD_GPIO_1_9__GPIO_1_9 IOMUX_PAD(0x818, 0x3EC, 1, 0x0, 0, MX51_GPIO_PAD_CTRL) +/* Raw pin modes without pad control */ +/* PAD MUX ALT INPSE PATH PADCTRL */ +#define _MX51_PAD_EIM_D16__AUD4_RXFS IOMUX_PAD(0x3f0, 0x5c, 5, 0x0000, 0, 0) +#define _MX51_PAD_EIM_D16__AUD5_TXD IOMUX_PAD(0x3f0, 0x5c, 7, 0x08d8, 0, 0) +#define _MX51_PAD_EIM_D16__EIM_D16 IOMUX_PAD(0x3f0, 0x5c, 0, 0x0000, 0, 0) +#define _MX51_PAD_EIM_D16__GPIO2_0 IOMUX_PAD(0x3f0, 0x5c, 1, 0x0000, 0, 0) +#define _MX51_PAD_EIM_D16__I2C1_SDA IOMUX_PAD(0x3f0, 0x5c, 0x14, 0x09b4, 0, 0) +#define _MX51_PAD_EIM_D16__UART2_CTS IOMUX_PAD(0x3f0, 0x5c, 3, 0x0000, 0, 0) +#define _MX51_PAD_EIM_D16__USBH2_DATA0 IOMUX_PAD(0x3f0, 0x5c, 2, 0x0000, 0, 0) +#define _MX51_PAD_EIM_D17__AUD5_RXD IOMUX_PAD(0x3f4, 0x60, 7, 0x08d4, 0, 0) +#define _MX51_PAD_EIM_D17__EIM_D17 IOMUX_PAD(0x3f4, 0x60, 0, 0x0000, 0, 0) +#define _MX51_PAD_EIM_D17__GPIO2_1 IOMUX_PAD(0x3f4, 0x60, 1, 0x0000, 0, 0) +#define _MX51_PAD_EIM_D17__UART2_RXD IOMUX_PAD(0x3f4, 0x60, 3, 0x09ec, 0, 0) +#define _MX51_PAD_EIM_D17__UART3_CTS IOMUX_PAD(0x3f4, 0x60, 4, 0x0000, 0, 0) +#define _MX51_PAD_EIM_D17__USBH2_DATA1 IOMUX_PAD(0x3f4, 0x60, 2, 0x0000, 0, 0) +#define _MX51_PAD_EIM_D18__AUD5_TXC IOMUX_PAD(0x3f8, 0x64, 7, 0x08e4, 0, 0) +#define _MX51_PAD_EIM_D18__EIM_D18 IOMUX_PAD(0x3f8, 0x64, 0, 0x0000, 0, 0) +#define _MX51_PAD_EIM_D18__GPIO2_2 IOMUX_PAD(0x3f8, 0x64, 1, 0x0000, 0, 0) +#define _MX51_PAD_EIM_D18__UART2_TXD IOMUX_PAD(0x3f8, 0x64, 3, 0x0000, 0, 0) +#define _MX51_PAD_EIM_D18__UART3_RTS IOMUX_PAD(0x3f8, 0x64, 4, 0x09f0, 1, 0) +#define _MX51_PAD_EIM_D18__USBH2_DATA2 IOMUX_PAD(0x3f8, 0x64, 2, 0x0000, 0, 0) +#define _MX51_PAD_EIM_D19__AUD4_RXC IOMUX_PAD(0x3fc, 0x68, 5, 0x0000, 0, 0) +#define _MX51_PAD_EIM_D19__AUD5_TXFS IOMUX_PAD(0x3fc, 0x68, 7, 0x08e8, 0, 0) +#define _MX51_PAD_EIM_D19__EIM_D19 IOMUX_PAD(0x3fc, 0x68, 0, 0x0000, 0, 0) +#define _MX51_PAD_EIM_D19__GPIO2_3 IOMUX_PAD(0x3fc, 0x68, 1, 0x0000, 0, 0) +#define _MX51_PAD_EIM_D19__I2C1_SCL IOMUX_PAD(0x3fc, 0x68, 0x14, 0x09b0, 0, 0) +#define _MX51_PAD_EIM_D19__UART2_RTS IOMUX_PAD(0x3fc, 0x68, 3, 0x09e8, 1, 0) +#define _MX51_PAD_EIM_D19__USBH2_DATA3 IOMUX_PAD(0x3fc, 0x68, 2, 0x0000, 0, 0) +#define _MX51_PAD_EIM_D20__AUD4_TXD IOMUX_PAD(0x400, 0x6c, 5, 0x08c8, 0, 0) +#define _MX51_PAD_EIM_D20__EIM_D20 IOMUX_PAD(0x400, 0x6c, 0, 0x0000, 0, 0) +#define _MX51_PAD_EIM_D20__GPIO2_4 IOMUX_PAD(0x400, 0x6c, 1, 0x0000, 0, 0) +#define _MX51_PAD_EIM_D20__SRTC_ALARM_DEB IOMUX_PAD(0x400, 0x6c, 4, 0x0000, 0, 0) +#define _MX51_PAD_EIM_D20__USBH2_DATA4 IOMUX_PAD(0x400, 0x6c, 2, 0x0000, 0, 0) +#define _MX51_PAD_EIM_D21__AUD4_RXD IOMUX_PAD(0x404, 0x70, 5, 0x08c4, 0, 0) +#define _MX51_PAD_EIM_D21__EIM_D21 IOMUX_PAD(0x404, 0x70, 0, 0x0000, 0, 0) +#define _MX51_PAD_EIM_D21__GPIO2_5 IOMUX_PAD(0x404, 0x70, 1, 0x0000, 0, 0) +#define _MX51_PAD_EIM_D21__SRTC_ALARM_DEB IOMUX_PAD(0x404, 0x70, 3, 0x0000, 0, 0) +#define _MX51_PAD_EIM_D21__USBH2_DATA5 IOMUX_PAD(0x404, 0x70, 2, 0x0000, 0, 0) +#define _MX51_PAD_EIM_D22__AUD4_TXC IOMUX_PAD(0x408, 0x74, 5, 0x08cc, 0, 0) +#define _MX51_PAD_EIM_D22__EIM_D22 IOMUX_PAD(0x408, 0x74, 0, 0x0000, 0, 0) +#define _MX51_PAD_EIM_D22__GPIO2_6 IOMUX_PAD(0x408, 0x74, 1, 0x0000, 0, 0) +#define _MX51_PAD_EIM_D22__USBH2_DATA6 IOMUX_PAD(0x408, 0x74, 2, 0x0000, 0, 0) +#define _MX51_PAD_EIM_D23__AUD4_TXFS IOMUX_PAD(0x40c, 0x78, 5, 0x08d0, 0, 0) +#define _MX51_PAD_EIM_D23__EIM_D23 IOMUX_PAD(0x40c, 0x78, 0, 0x0000, 0, 0) +#define _MX51_PAD_EIM_D23__GPIO2_7 IOMUX_PAD(0x40c, 0x78, 1, 0x0000, 0, 0) +#define _MX51_PAD_EIM_D23__SPDIF_OUT1 IOMUX_PAD(0x40c, 0x78, 4, 0x0000, 0, 0) +#define _MX51_PAD_EIM_D23__USBH2_DATA7 IOMUX_PAD(0x40c, 0x78, 2, 0x0000, 0, 0) +#define _MX51_PAD_EIM_D24__AUD6_RXFS IOMUX_PAD(0x410, 0x7c, 5, 0x08f8, 0, 0) +#define _MX51_PAD_EIM_D24__EIM_D24 IOMUX_PAD(0x410, 0x7c, 0, 0x0000, 0, 0) +#define _MX51_PAD_EIM_D24__GPIO2_8 IOMUX_PAD(0x410, 0x7c, 1, 0x0000, 0, 0) +#define _MX51_PAD_EIM_D24__I2C2_SDA IOMUX_PAD(0x410, 0x7c, 0x14, 0x09bc, 0, 0) +#define _MX51_PAD_EIM_D24__UART3_CTS IOMUX_PAD(0x410, 0x7c, 3, 0x0000, 0, 0) +#define _MX51_PAD_EIM_D24__USBOTG_DATA0 IOMUX_PAD(0x410, 0x7c, 2, 0x0000, 0, 0) +#define _MX51_PAD_EIM_D25__EIM_D25 IOMUX_PAD(0x414, 0x80, 0, 0x0000, 0, 0) +#define _MX51_PAD_EIM_D25__KEY_COL6 IOMUX_PAD(0x414, 0x80, 1, 0x09c8, 0, 0) +#define _MX51_PAD_EIM_D25__UART2_CTS IOMUX_PAD(0x414, 0x80, 4, 0x0000, 0, 0) +#define _MX51_PAD_EIM_D25__UART3_RXD IOMUX_PAD(0x414, 0x80, 3, 0x09f4, 0, 0) +#define _MX51_PAD_EIM_D25__USBOTG_DATA1 IOMUX_PAD(0x414, 0x80, 2, 0x0000, 0, 0) +#define _MX51_PAD_EIM_D26__EIM_D26 IOMUX_PAD(0x418, 0x84, 0, 0x0000, 0, 0) +#define _MX51_PAD_EIM_D26__KEY_COL7 IOMUX_PAD(0x418, 0x84, 1, 0x09cc, 0, 0) +#define _MX51_PAD_EIM_D26__UART2_RTS IOMUX_PAD(0x418, 0x84, 4, 0x09e8, 3, 0) +#define _MX51_PAD_EIM_D26__UART3_TXD IOMUX_PAD(0x418, 0x84, 3, 0x0000, 0, 0) +#define _MX51_PAD_EIM_D26__USBOTG_DATA2 IOMUX_PAD(0x418, 0x84, 2, 0x0000, 0, 0) +#define _MX51_PAD_EIM_D27__AUD6_RXC IOMUX_PAD(0x41c, 0x88, 5, 0x08f4, 0, 0) +#define _MX51_PAD_EIM_D27__EIM_D27 IOMUX_PAD(0x41c, 0x88, 0, 0x0000, 0, 0) +#define _MX51_PAD_EIM_D27__GPIO2_9 IOMUX_PAD(0x41c, 0x88, 1, 0x0000, 0, 0) +#define _MX51_PAD_EIM_D27__I2C2_SCL IOMUX_PAD(0x41c, 0x88, 0x14, 0x09b8, 0, 0) +#define _MX51_PAD_EIM_D27__UART3_RTS IOMUX_PAD(0x41c, 0x88, 3, 0x09f0, 3, 0) +#define _MX51_PAD_EIM_D27__USBOTG_DATA3 IOMUX_PAD(0x41c, 0x88, 2, 0x0000, 0, 0) +#define _MX51_PAD_EIM_D28__AUD6_TXD IOMUX_PAD(0x420, 0x8c, 5, 0x08f0, 0, 0) +#define _MX51_PAD_EIM_D28__EIM_D28 IOMUX_PAD(0x420, 0x8c, 0, 0x0000, 0, 0) +#define _MX51_PAD_EIM_D28__KEY_ROW4 IOMUX_PAD(0x420, 0x8c, 1, 0x09d0, 0, 0) +#define _MX51_PAD_EIM_D28__USBOTG_DATA4 IOMUX_PAD(0x420, 0x8c, 2, 0x0000, 0, 0) +#define _MX51_PAD_EIM_D29__AUD6_RXD IOMUX_PAD(0x424, 0x90, 5, 0x08ec, 0, 0) +#define _MX51_PAD_EIM_D29__EIM_D29 IOMUX_PAD(0x424, 0x90, 0, 0x0000, 0, 0) +#define _MX51_PAD_EIM_D29__KEY_ROW5 IOMUX_PAD(0x424, 0x90, 1, 0x09d4, 0, 0) +#define _MX51_PAD_EIM_D29__USBOTG_DATA5 IOMUX_PAD(0x424, 0x90, 2, 0x0000, 0, 0) +#define _MX51_PAD_EIM_D30__AUD6_TXC IOMUX_PAD(0x428, 0x94, 5, 0x08fc, 0, 0) +#define _MX51_PAD_EIM_D30__EIM_D30 IOMUX_PAD(0x428, 0x94, 0, 0x0000, 0, 0) +#define _MX51_PAD_EIM_D30__KEY_ROW6 IOMUX_PAD(0x428, 0x94, 1, 0x09d8, 0, 0) +#define _MX51_PAD_EIM_D30__USBOTG_DATA6 IOMUX_PAD(0x428, 0x94, 2, 0x0000, 0, 0) +#define _MX51_PAD_EIM_D31__AUD6_TXFS IOMUX_PAD(0x42c, 0x98, 5, 0x0900, 0, 0) +#define _MX51_PAD_EIM_D31__EIM_D31 IOMUX_PAD(0x42c, 0x98, 0, 0x0000, 0, 0) +#define _MX51_PAD_EIM_D31__KEY_ROW7 IOMUX_PAD(0x42c, 0x98, 1, 0x09dc, 0, 0) +#define _MX51_PAD_EIM_D31__USBOTG_DATA7 IOMUX_PAD(0x42c, 0x98, 2, 0x0000, 0, 0) +#define _MX51_PAD_EIM_A16__EIM_A16 IOMUX_PAD(0x430, 0x9c, 0, 0x0000, 0, 0) +#define _MX51_PAD_EIM_A16__GPIO2_10 IOMUX_PAD(0x430, 0x9c, 1, 0x0000, 0, 0) +#define _MX51_PAD_EIM_A16__OSC_FREQ_SEL0 IOMUX_PAD(0x430, 0x9c, 7, 0x0000, 0, 0) +#define _MX51_PAD_EIM_A17__EIM_A17 IOMUX_PAD(0x434, 0xa0, 0, 0x0000, 0, 0) +#define _MX51_PAD_EIM_A17__GPIO2_11 IOMUX_PAD(0x434, 0xa0, 1, 0x0000, 0, 0) +#define _MX51_PAD_EIM_A17__OSC_FREQ_SEL1 IOMUX_PAD(0x434, 0xa0, 7, 0x0000, 0, 0) +#define _MX51_PAD_EIM_A18__BOOT_LPB0 IOMUX_PAD(0x438, 0xa4, 7, 0x0000, 0, 0) +#define _MX51_PAD_EIM_A18__EIM_A18 IOMUX_PAD(0x438, 0xa4, 0, 0x0000, 0, 0) +#define _MX51_PAD_EIM_A18__GPIO2_12 IOMUX_PAD(0x438, 0xa4, 1, 0x0000, 0, 0) +#define _MX51_PAD_EIM_A19__BOOT_LPB1 IOMUX_PAD(0x43c, 0xa8, 7, 0x0000, 0, 0) +#define _MX51_PAD_EIM_A19__EIM_A19 IOMUX_PAD(0x43c, 0xa8, 0, 0x0000, 0, 0) +#define _MX51_PAD_EIM_A19__GPIO2_13 IOMUX_PAD(0x43c, 0xa8, 1, 0x0000, 0, 0) +#define _MX51_PAD_EIM_A20__BOOT_UART_SRC0 IOMUX_PAD(0x440, 0xac, 7, 0x0000, 0, 0) +#define _MX51_PAD_EIM_A20__EIM_A20 IOMUX_PAD(0x440, 0xac, 0, 0x0000, 0, 0) +#define _MX51_PAD_EIM_A20__GPIO2_14 IOMUX_PAD(0x440, 0xac, 1, 0x0000, 0, 0) +#define _MX51_PAD_EIM_A21__BOOT_UART_SRC1 IOMUX_PAD(0x444, 0xb0, 7, 0x0000, 0, 0) +#define _MX51_PAD_EIM_A21__EIM_A21 IOMUX_PAD(0x444, 0xb0, 0, 0x0000, 0, 0) +#define _MX51_PAD_EIM_A21__GPIO2_15 IOMUX_PAD(0x444, 0xb0, 1, 0x0000, 0, 0) +#define _MX51_PAD_EIM_A22__EIM_A22 IOMUX_PAD(0x448, 0xb4, 0, 0x0000, 0, 0) +#define _MX51_PAD_EIM_A22__GPIO2_16 IOMUX_PAD(0x448, 0xb4, 1, 0x0000, 0, 0) +#define _MX51_PAD_EIM_A23__BOOT_HPN_EN IOMUX_PAD(0x44c, 0xb8, 7, 0x0000, 0, 0) +#define _MX51_PAD_EIM_A23__EIM_A23 IOMUX_PAD(0x44c, 0xb8, 0, 0x0000, 0, 0) +#define _MX51_PAD_EIM_A23__GPIO2_17 IOMUX_PAD(0x44c, 0xb8, 1, 0x0000, 0, 0) +#define _MX51_PAD_EIM_A24__EIM_A24 IOMUX_PAD(0x450, 0xbc, 0, 0x0000, 0, 0) +#define _MX51_PAD_EIM_A24__GPIO2_18 IOMUX_PAD(0x450, 0xbc, 1, 0x0000, 0, 0) +#define _MX51_PAD_EIM_A24__USBH2_CLK IOMUX_PAD(0x450, 0xbc, 2, 0x0000, 0, 0) +#define _MX51_PAD_EIM_A25__DISP1_PIN4 IOMUX_PAD(0x454, 0xc0, 6, 0x0000, 0, 0) +#define _MX51_PAD_EIM_A25__EIM_A25 IOMUX_PAD(0x454, 0xc0, 0, 0x0000, 0, 0) +#define _MX51_PAD_EIM_A25__GPIO2_19 IOMUX_PAD(0x454, 0xc0, 1, 0x0000, 0, 0) +#define _MX51_PAD_EIM_A25__USBH2_DIR IOMUX_PAD(0x454, 0xc0, 2, 0x0000, 0, 0) +#define _MX51_PAD_EIM_A26__CSI1_DATA_EN IOMUX_PAD(0x458, 0xc4, 5, 0x09a0, 0, 0) +#define _MX51_PAD_EIM_A26__DISP2_EXT_CLK IOMUX_PAD(0x458, 0xc4, 6, 0x0908, 0, 0) +#define _MX51_PAD_EIM_A26__EIM_A26 IOMUX_PAD(0x458, 0xc4, 0, 0x0000, 0, 0) +#define _MX51_PAD_EIM_A26__GPIO2_20 IOMUX_PAD(0x458, 0xc4, 1, 0x0000, 0, 0) +#define _MX51_PAD_EIM_A26__USBH2_STP IOMUX_PAD(0x458, 0xc4, 2, 0x0000, 0, 0) +#define _MX51_PAD_EIM_A27__CSI2_DATA_EN IOMUX_PAD(0x45c, 0xc8, 5, 0x099c, 0, 0) +#define _MX51_PAD_EIM_A27__DISP1_PIN1 IOMUX_PAD(0x45c, 0xc8, 6, 0x09a4, 0, 0) +#define _MX51_PAD_EIM_A27__EIM_A27 IOMUX_PAD(0x45c, 0xc8, 0, 0x0000, 0, 0) +#define _MX51_PAD_EIM_A27__GPIO2_21 IOMUX_PAD(0x45c, 0xc8, 1, 0x0000, 0, 0) +#define _MX51_PAD_EIM_A27__USBH2_NXT IOMUX_PAD(0x45c, 0xc8, 2, 0x0000, 0, 0) +#define _MX51_PAD_EIM_EB0__EIM_EB0 IOMUX_PAD(0x460, 0xcc, 0, 0x0000, 0, 0) +#define _MX51_PAD_EIM_EB1__EIM_EB1 IOMUX_PAD(0x464, 0xd0, 0, 0x0000, 0, 0) +#define _MX51_PAD_EIM_EB2__AUD5_RXFS IOMUX_PAD(0x468, 0xd4, 6, 0x08e0, 0, 0) +#define _MX51_PAD_EIM_EB2__CSI1_D2 IOMUX_PAD(0x468, 0xd4, 5, 0x0000, 0, 0) +#define _MX51_PAD_EIM_EB2__EIM_EB2 IOMUX_PAD(0x468, 0xd4, 0, 0x0000, 0, 0) +#define _MX51_PAD_EIM_EB2__FEC_MDIO IOMUX_PAD(0x468, 0xd4, 3, 0x0954, 0, 0) +#define _MX51_PAD_EIM_EB2__GPIO2_22 IOMUX_PAD(0x468, 0xd4, 1, 0x0000, 0, 0) +#define _MX51_PAD_EIM_EB2__GPT_CMPOUT1 IOMUX_PAD(0x468, 0xd4, 7, 0x0000, 0, 0) +#define _MX51_PAD_EIM_EB3__AUD5_RXC IOMUX_PAD(0x46c, 0xd8, 6, 0x08dc, 0, 0) +#define _MX51_PAD_EIM_EB3__CSI1_D3 IOMUX_PAD(0x46c, 0xd8, 5, 0x0000, 0, 0) +#define _MX51_PAD_EIM_EB3__EIM_EB3 IOMUX_PAD(0x46c, 0xd8, 0, 0x0000, 0, 0) +#define _MX51_PAD_EIM_EB3__FEC_RDATA1 IOMUX_PAD(0x46c, 0xd8, 3, 0x095c, 0, 0) +#define _MX51_PAD_EIM_EB3__GPIO2_23 IOMUX_PAD(0x46c, 0xd8, 1, 0x0000, 0, 0) +#define _MX51_PAD_EIM_EB3__GPT_CMPOUT2 IOMUX_PAD(0x46c, 0xd8, 7, 0x0000, 0, 0) +#define _MX51_PAD_EIM_OE__EIM_OE IOMUX_PAD(0x470, 0xdc, 0, 0x0000, 0, 0) +#define _MX51_PAD_EIM_OE__GPIO2_24 IOMUX_PAD(0x470, 0xdc, 1, 0x0000, 0, 0) +#define _MX51_PAD_EIM_CS0__EIM_CS0 IOMUX_PAD(0x474, 0xe0, 0, 0x0000, 0, 0) +#define _MX51_PAD_EIM_CS0__GPIO2_25 IOMUX_PAD(0x474, 0xe0, 1, 0x0000, 0, 0) +#define _MX51_PAD_EIM_CS1__EIM_CS1 IOMUX_PAD(0x478, 0xe4, 0, 0x0000, 0, 0) +#define _MX51_PAD_EIM_CS1__GPIO2_26 IOMUX_PAD(0x478, 0xe4, 1, 0x0000, 0, 0) +#define _MX51_PAD_EIM_CS2__AUD5_TXD IOMUX_PAD(0x47c, 0xe8, 6, 0x08d8, 1, 0) +#define _MX51_PAD_EIM_CS2__CSI1_D4 IOMUX_PAD(0x47c, 0xe8, 5, 0x0000, 0, 0) +#define _MX51_PAD_EIM_CS2__EIM_CS2 IOMUX_PAD(0x47c, 0xe8, 0, 0x0000, 0, 0) +#define _MX51_PAD_EIM_CS2__FEC_RDATA2 IOMUX_PAD(0x47c, 0xe8, 3, 0x0960, 0, 0) +#define _MX51_PAD_EIM_CS2__GPIO2_27 IOMUX_PAD(0x47c, 0xe8, 1, 0x0000, 0, 0) +#define _MX51_PAD_EIM_CS2__USBOTG_STP IOMUX_PAD(0x47c, 0xe8, 2, 0x0000, 0, 0) +#define _MX51_PAD_EIM_CS3__AUD5_RXD IOMUX_PAD(0x480, 0xec, 6, 0x08d4, 1, 0) +#define _MX51_PAD_EIM_CS3__CSI1_D5 IOMUX_PAD(0x480, 0xec, 5, 0x0000, 0, 0) +#define _MX51_PAD_EIM_CS3__EIM_CS3 IOMUX_PAD(0x480, 0xec, 0, 0x0000, 0, 0) +#define _MX51_PAD_EIM_CS3__FEC_RDATA3 IOMUX_PAD(0x480, 0xec, 3, 0x0964, 0, 0) +#define _MX51_PAD_EIM_CS3__GPIO2_28 IOMUX_PAD(0x480, 0xec, 1, 0x0000, 0, 0) +#define _MX51_PAD_EIM_CS3__USBOTG_NXT IOMUX_PAD(0x480, 0xec, 2, 0x0000, 0, 0) +#define _MX51_PAD_EIM_CS4__AUD5_TXC IOMUX_PAD(0x484, 0xf0, 6, 0x08e4, 1, 0) +#define _MX51_PAD_EIM_CS4__CSI1_D6 IOMUX_PAD(0x484, 0xf0, 5, 0x0000, 0, 0) +#define _MX51_PAD_EIM_CS4__EIM_CS4 IOMUX_PAD(0x484, 0xf0, 0, 0x0000, 0, 0) +#define _MX51_PAD_EIM_CS4__FEC_RX_ER IOMUX_PAD(0x484, 0xf0, 3, 0x0970, 0, 0) +#define _MX51_PAD_EIM_CS4__GPIO2_29 IOMUX_PAD(0x484, 0xf0, 1, 0x0000, 0, 0) +#define _MX51_PAD_EIM_CS4__USBOTG_CLK IOMUX_PAD(0x484, 0xf0, 2, 0x0000, 0, 0) +#define _MX51_PAD_EIM_CS5__AUD5_TXFS IOMUX_PAD(0x488, 0xf4, 6, 0x08e8, 1, 0) +#define _MX51_PAD_EIM_CS5__CSI1_D7 IOMUX_PAD(0x488, 0xf4, 5, 0x0000, 0, 0) +#define _MX51_PAD_EIM_CS5__DISP1_EXT_CLK IOMUX_PAD(0x488, 0xf4, 4, 0x0904, 0, 0) +#define _MX51_PAD_EIM_CS5__EIM_CS5 IOMUX_PAD(0x488, 0xf4, 0, 0x0000, 0, 0) +#define _MX51_PAD_EIM_CS5__FEC_CRS IOMUX_PAD(0x488, 0xf4, 3, 0x0950, 0, 0) +#define _MX51_PAD_EIM_CS5__GPIO2_30 IOMUX_PAD(0x488, 0xf4, 1, 0x0000, 0, 0) +#define _MX51_PAD_EIM_CS5__USBOTG_DIR IOMUX_PAD(0x488, 0xf4, 2, 0x0000, 0, 0) +#define _MX51_PAD_EIM_DTACK__EIM_DTACK IOMUX_PAD(0x48c, 0xf8, 0, 0x0000, 0, 0) +#define _MX51_PAD_EIM_DTACK__GPIO2_31 IOMUX_PAD(0x48c, 0xf8, 1, 0x0000, 0, 0) +#define _MX51_PAD_EIM_LBA__EIM_LBA IOMUX_PAD(0x494, 0xfc, 0, 0x0000, 0, 0) +#define _MX51_PAD_EIM_LBA__GPIO3_1 IOMUX_PAD(0x494, 0xfc, 1, 0x0978, 0, 0) +#define _MX51_PAD_EIM_CRE__EIM_CRE IOMUX_PAD(0x4a0, 0x100, 0, 0x0000, 0, 0) +#define _MX51_PAD_EIM_CRE__GPIO3_2 IOMUX_PAD(0x4a0, 0x100, 1, 0x097c, 0, 0) +#define _MX51_PAD_DRAM_CS1__DRAM_CS1 IOMUX_PAD(0x4d0, 0x104, 0, 0x0000, 0, 0) +#define _MX51_PAD_NANDF_WE_B__GPIO3_3 IOMUX_PAD(0x4e4, 0x108, 3, 0x0980, 0, 0) +#define _MX51_PAD_NANDF_WE_B__NANDF_WE_B IOMUX_PAD(0x4e4, 0x108, 0, 0x0000, 0, 0) +#define _MX51_PAD_NANDF_WE_B__PATA_DIOW IOMUX_PAD(0x4e4, 0x108, 1, 0x0000, 0, 0) +#define _MX51_PAD_NANDF_WE_B__SD3_DATA0 IOMUX_PAD(0x4e4, 0x108, 2, 0x093c, 0, 0) +#define _MX51_PAD_NANDF_RE_B__GPIO3_4 IOMUX_PAD(0x4e8, 0x10c, 3, 0x0984, 0, 0) +#define _MX51_PAD_NANDF_RE_B__NANDF_RE_B IOMUX_PAD(0x4e8, 0x10c, 0, 0x0000, 0, 0) +#define _MX51_PAD_NANDF_RE_B__PATA_DIOR IOMUX_PAD(0x4e8, 0x10c, 1, 0x0000, 0, 0) +#define _MX51_PAD_NANDF_RE_B__SD3_DATA1 IOMUX_PAD(0x4e8, 0x10c, 2, 0x0940, 0, 0) +#define _MX51_PAD_NANDF_ALE__GPIO3_5 IOMUX_PAD(0x4ec, 0x110, 3, 0x0988, 0, 0) +#define _MX51_PAD_NANDF_ALE__NANDF_ALE IOMUX_PAD(0x4ec, 0x110, 0, 0x0000, 0, 0) +#define _MX51_PAD_NANDF_ALE__PATA_BUFFER_EN IOMUX_PAD(0x4ec, 0x110, 1, 0x0000, 0, 0) +#define _MX51_PAD_NANDF_CLE__GPIO3_6 IOMUX_PAD(0x4f0, 0x114, 3, 0x098c, 0, 0) +#define _MX51_PAD_NANDF_CLE__NANDF_CLE IOMUX_PAD(0x4f0, 0x114, 0, 0x0000, 0, 0) +#define _MX51_PAD_NANDF_CLE__PATA_RESET_B IOMUX_PAD(0x4f0, 0x114, 1, 0x0000, 0, 0) +#define _MX51_PAD_NANDF_WP_B__GPIO3_7 IOMUX_PAD(0x4f4, 0x118, 3, 0x0990, 0, 0) +#define _MX51_PAD_NANDF_WP_B__NANDF_WP_B IOMUX_PAD(0x4f4, 0x118, 0, 0x0000, 0, 0) +#define _MX51_PAD_NANDF_WP_B__PATA_DMACK IOMUX_PAD(0x4f4, 0x118, 1, 0x0000, 0, 0) +#define _MX51_PAD_NANDF_WP_B__SD3_DATA2 IOMUX_PAD(0x4f4, 0x118, 2, 0x0944, 0, 0) +#define _MX51_PAD_NANDF_RB0__ECSPI2_SS1 IOMUX_PAD(0x4f8, 0x11c, 5, 0x0930, 0, 0) +#define _MX51_PAD_NANDF_RB0__GPIO3_8 IOMUX_PAD(0x4f8, 0x11c, 3, 0x0994, 0, 0) +#define _MX51_PAD_NANDF_RB0__NANDF_RB0 IOMUX_PAD(0x4f8, 0x11c, 0, 0x0000, 0, 0) +#define _MX51_PAD_NANDF_RB0__PATA_DMARQ IOMUX_PAD(0x4f8, 0x11c, 1, 0x0000, 0, 0) +#define _MX51_PAD_NANDF_RB0__SD3_DATA3 IOMUX_PAD(0x4f8, 0x11c, 2, 0x0948, 0, 0) +#define _MX51_PAD_NANDF_RB1__CSPI_MOSI IOMUX_PAD(0x4fc, 0x120, 6, 0x091c, 0, 0) +#define _MX51_PAD_NANDF_RB1__ECSPI2_RDY IOMUX_PAD(0x4fc, 0x120, 2, 0x0000, 0, 0) +#define _MX51_PAD_NANDF_RB1__GPIO3_9 IOMUX_PAD(0x4fc, 0x120, 3, 0x0000, 0, 0) +#define _MX51_PAD_NANDF_RB1__NANDF_RB1 IOMUX_PAD(0x4fc, 0x120, 0, 0x0000, 0, 0) +#define _MX51_PAD_NANDF_RB1__PATA_IORDY IOMUX_PAD(0x4fc, 0x120, 1, 0x0000, 0, 0) +#define _MX51_PAD_NANDF_RB1__SD4_CMD IOMUX_PAD(0x4fc, 0x120, 5, 0x0000, 0, 0) +#define _MX51_PAD_NANDF_RB2__DISP2_WAIT IOMUX_PAD(0x500, 0x124, 5, 0x09a8, 0, 0) +#define _MX51_PAD_NANDF_RB2__ECSPI2_SCLK IOMUX_PAD(0x500, 0x124, 2, 0x0000, 0, 0) +#define _MX51_PAD_NANDF_RB2__FEC_COL IOMUX_PAD(0x500, 0x124, 1, 0x094c, 0, 0) +#define _MX51_PAD_NANDF_RB2__GPIO3_10 IOMUX_PAD(0x500, 0x124, 3, 0x0000, 0, 0) +#define _MX51_PAD_NANDF_RB2__NANDF_RB2 IOMUX_PAD(0x500, 0x124, 0, 0x0000, 0, 0) +#define _MX51_PAD_NANDF_RB2__USBH3_H3_DP IOMUX_PAD(0x500, 0x124, 7, 0x0000, 0, 0) +#define _MX51_PAD_NANDF_RB2__USBH3_NXT IOMUX_PAD(0x500, 0x124, 6, 0x0a20, 0, 0) +#define _MX51_PAD_NANDF_RB3__DISP1_WAIT IOMUX_PAD(0x504, 0x128, 5, 0x0000, 0, 0) +#define _MX51_PAD_NANDF_RB3__ECSPI2_MISO IOMUX_PAD(0x504, 0x128, 2, 0x0000, 0, 0) +#define _MX51_PAD_NANDF_RB3__FEC_RX_CLK IOMUX_PAD(0x504, 0x128, 1, 0x0968, 0, 0) +#define _MX51_PAD_NANDF_RB3__GPIO3_11 IOMUX_PAD(0x504, 0x128, 3, 0x0000, 0, 0) +#define _MX51_PAD_NANDF_RB3__NANDF_RB3 IOMUX_PAD(0x504, 0x128, 0, 0x0000, 0, 0) +#define _MX51_PAD_NANDF_RB3__USBH3_CLK IOMUX_PAD(0x504, 0x128, 6, 0x09f8, 0, 0) +#define _MX51_PAD_NANDF_RB3__USBH3_H3_DM IOMUX_PAD(0x504, 0x128, 7, 0x0000, 0, 0) +#define _MX51_PAD_GPIO_NAND__GPIO_NAND IOMUX_PAD(0x514, 0x12c, 0, 0x0998, 0, 0) +#define _MX51_PAD_GPIO_NAND__PATA_INTRQ IOMUX_PAD(0x514, 0x12c, 1, 0x0000, 0, 0) +#define _MX51_PAD_NANDF_CS0__GPIO3_16 IOMUX_PAD(0x518, 0x130, 3, 0x0000, 0, 0) +#define _MX51_PAD_NANDF_CS0__NANDF_CS0 IOMUX_PAD(0x518, 0x130, 0, 0x0000, 0, 0) +#define _MX51_PAD_NANDF_CS1__GPIO3_17 IOMUX_PAD(0x51c, 0x134, 3, 0x0000, 0, 0) +#define _MX51_PAD_NANDF_CS1__NANDF_CS1 IOMUX_PAD(0x51c, 0x134, 0, 0x0000, 0, 0) +#define _MX51_PAD_NANDF_CS2__CSPI_SCLK IOMUX_PAD(0x520, 0x138, 6, 0x0914, 0, 0) +#define _MX51_PAD_NANDF_CS2__FEC_TX_ER IOMUX_PAD(0x520, 0x138, 2, 0x0000, 0, 0) +#define _MX51_PAD_NANDF_CS2__GPIO3_18 IOMUX_PAD(0x520, 0x138, 3, 0x0000, 0, 0) +#define _MX51_PAD_NANDF_CS2__NANDF_CS2 IOMUX_PAD(0x520, 0x138, 0, 0x0000, 0, 0) +#define _MX51_PAD_NANDF_CS2__PATA_CS_0 IOMUX_PAD(0x520, 0x138, 1, 0x0000, 0, 0) +#define _MX51_PAD_NANDF_CS2__SD4_CLK IOMUX_PAD(0x520, 0x138, 5, 0x0000, 0, 0) +#define _MX51_PAD_NANDF_CS2__USBH3_H1_DP IOMUX_PAD(0x520, 0x138, 7, 0x0000, 0, 0) +#define _MX51_PAD_NANDF_CS3__FEC_MDC IOMUX_PAD(0x524, 0x13c, 2, 0x0000, 0, 0) +#define _MX51_PAD_NANDF_CS3__GPIO3_19 IOMUX_PAD(0x524, 0x13c, 3, 0x0000, 0, 0) +#define _MX51_PAD_NANDF_CS3__NANDF_CS3 IOMUX_PAD(0x524, 0x13c, 0, 0x0000, 0, 0) +#define _MX51_PAD_NANDF_CS3__PATA_CS_1 IOMUX_PAD(0x524, 0x13c, 1, 0x0000, 0, 0) +#define _MX51_PAD_NANDF_CS3__SD4_DAT0 IOMUX_PAD(0x524, 0x13c, 5, 0x0000, 0, 0) +#define _MX51_PAD_NANDF_CS3__USBH3_H1_DM IOMUX_PAD(0x524, 0x13c, 7, 0x0000, 0, 0) +#define _MX51_PAD_NANDF_CS4__FEC_TDATA1 IOMUX_PAD(0x528, 0x140, 2, 0x0000, 0, 0) +#define _MX51_PAD_NANDF_CS4__GPIO3_20 IOMUX_PAD(0x528, 0x140, 3, 0x0000, 0, 0) +#define _MX51_PAD_NANDF_CS4__NANDF_CS4 IOMUX_PAD(0x528, 0x140, 0, 0x0000, 0, 0) +#define _MX51_PAD_NANDF_CS4__PATA_DA_0 IOMUX_PAD(0x528, 0x140, 1, 0x0000, 0, 0) +#define _MX51_PAD_NANDF_CS4__SD4_DAT1 IOMUX_PAD(0x528, 0x140, 5, 0x0000, 0, 0) +#define _MX51_PAD_NANDF_CS4__USBH3_STP IOMUX_PAD(0x528, 0x140, 7, 0x0a24, 0, 0) +#define _MX51_PAD_NANDF_CS5__FEC_TDATA2 IOMUX_PAD(0x52c, 0x144, 2, 0x0000, 0, 0) +#define _MX51_PAD_NANDF_CS5__GPIO3_21 IOMUX_PAD(0x52c, 0x144, 3, 0x0000, 0, 0) +#define _MX51_PAD_NANDF_CS5__NANDF_CS5 IOMUX_PAD(0x52c, 0x144, 0, 0x0000, 0, 0) +#define _MX51_PAD_NANDF_CS5__PATA_DA_1 IOMUX_PAD(0x52c, 0x144, 1, 0x0000, 0, 0) +#define _MX51_PAD_NANDF_CS5__SD4_DAT2 IOMUX_PAD(0x52c, 0x144, 5, 0x0000, 0, 0) +#define _MX51_PAD_NANDF_CS5__USBH3_DIR IOMUX_PAD(0x52c, 0x144, 7, 0x0a1c, 0, 0) +#define _MX51_PAD_NANDF_CS6__CSPI_SS3 IOMUX_PAD(0x530, 0x148, 7, 0x0928, 0, 0) +#define _MX51_PAD_NANDF_CS6__FEC_TDATA3 IOMUX_PAD(0x530, 0x148, 2, 0x0000, 0, 0) +#define _MX51_PAD_NANDF_CS6__GPIO3_22 IOMUX_PAD(0x530, 0x148, 3, 0x0000, 0, 0) +#define _MX51_PAD_NANDF_CS6__NANDF_CS6 IOMUX_PAD(0x530, 0x148, 0, 0x0000, 0, 0) +#define _MX51_PAD_NANDF_CS6__PATA_DA_2 IOMUX_PAD(0x530, 0x148, 1, 0x0000, 0, 0) +#define _MX51_PAD_NANDF_CS6__SD4_DAT3 IOMUX_PAD(0x530, 0x148, 5, 0x0000, 0, 0) +#define _MX51_PAD_NANDF_CS7__FEC_TX_EN IOMUX_PAD(0x534, 0x14c, 1, 0x0000, 0, 0) +#define _MX51_PAD_NANDF_CS7__GPIO3_23 IOMUX_PAD(0x534, 0x14c, 3, 0x0000, 0, 0) +#define _MX51_PAD_NANDF_CS7__NANDF_CS7 IOMUX_PAD(0x534, 0x14c, 0, 0x0000, 0, 0) +#define _MX51_PAD_NANDF_CS7__SD3_CLK IOMUX_PAD(0x534, 0x14c, 5, 0x0000, 0, 0) +#define _MX51_PAD_NANDF_RDY_INT__ECSPI2_SS0 IOMUX_PAD(0x538, 0x150, 2, 0x0000, 0, 0) +#define _MX51_PAD_NANDF_RDY_INT__FEC_TX_CLK IOMUX_PAD(0x538, 0x150, 1, 0x0974, 0, 0) +#define _MX51_PAD_NANDF_RDY_INT__GPIO3_24 IOMUX_PAD(0x538, 0x150, 3, 0x0000, 0, 0) +#define _MX51_PAD_NANDF_RDY_INT__NANDF_RDY_INT IOMUX_PAD(0x538, 0x150, 0, 0x0938, 0, 0) +#define _MX51_PAD_NANDF_RDY_INT__SD3_CMD IOMUX_PAD(0x538, 0x150, 5, 0x0000, 0, 0) +#define _MX51_PAD_NANDF_D15__ECSPI2_MOSI IOMUX_PAD(0x53c, 0x154, 2, 0x0000, 0, 0) +#define _MX51_PAD_NANDF_D15__GPIO3_25 IOMUX_PAD(0x53c, 0x154, 3, 0x0000, 0, 0) +#define _MX51_PAD_NANDF_D15__NANDF_D15 IOMUX_PAD(0x53c, 0x154, 0, 0x0000, 0, 0) +#define _MX51_PAD_NANDF_D15__PATA_DATA15 IOMUX_PAD(0x53c, 0x154, 1, 0x0000, 0, 0) +#define _MX51_PAD_NANDF_D15__SD3_DAT7 IOMUX_PAD(0x53c, 0x154, 5, 0x0000, 0, 0) +#define _MX51_PAD_NANDF_D14__ECSPI2_SS3 IOMUX_PAD(0x540, 0x158, 2, 0x0934, 0, 0) +#define _MX51_PAD_NANDF_D14__GPIO3_26 IOMUX_PAD(0x540, 0x158, 3, 0x0000, 0, 0) +#define _MX51_PAD_NANDF_D14__NANDF_D14 IOMUX_PAD(0x540, 0x158, 0, 0x0000, 0, 0) +#define _MX51_PAD_NANDF_D14__PATA_DATA14 IOMUX_PAD(0x540, 0x158, 1, 0x0000, 0, 0) +#define _MX51_PAD_NANDF_D14__SD3_DAT6 IOMUX_PAD(0x540, 0x158, 5, 0x0000, 0, 0) +#define _MX51_PAD_NANDF_D13__ECSPI2_SS2 IOMUX_PAD(0x544, 0x15c, 2, 0x0000, 0, 0) +#define _MX51_PAD_NANDF_D13__GPIO3_27 IOMUX_PAD(0x544, 0x15c, 3, 0x0000, 0, 0) +#define _MX51_PAD_NANDF_D13__NANDF_D13 IOMUX_PAD(0x544, 0x15c, 0, 0x0000, 0, 0) +#define _MX51_PAD_NANDF_D13__PATA_DATA13 IOMUX_PAD(0x544, 0x15c, 1, 0x0000, 0, 0) +#define _MX51_PAD_NANDF_D13__SD3_DAT5 IOMUX_PAD(0x544, 0x15c, 5, 0x0000, 0, 0) +#define _MX51_PAD_NANDF_D12__ECSPI2_SS1 IOMUX_PAD(0x548, 0x160, 2, 0x0930, 1, 0) +#define _MX51_PAD_NANDF_D12__GPIO3_28 IOMUX_PAD(0x548, 0x160, 3, 0x0000, 0, 0) +#define _MX51_PAD_NANDF_D12__NANDF_D12 IOMUX_PAD(0x548, 0x160, 0, 0x0000, 0, 0) +#define _MX51_PAD_NANDF_D12__PATA_DATA12 IOMUX_PAD(0x548, 0x160, 1, 0x0000, 0, 0) +#define _MX51_PAD_NANDF_D12__SD3_DAT4 IOMUX_PAD(0x548, 0x160, 5, 0x0000, 0, 0) +#define _MX51_PAD_NANDF_D11__FEC_RX_DV IOMUX_PAD(0x54c, 0x164, 2, 0x096c, 0, 0) +#define _MX51_PAD_NANDF_D11__GPIO3_29 IOMUX_PAD(0x54c, 0x164, 3, 0x0000, 0, 0) +#define _MX51_PAD_NANDF_D11__NANDF_D11 IOMUX_PAD(0x54c, 0x164, 0, 0x0000, 0, 0) +#define _MX51_PAD_NANDF_D11__PATA_DATA11 IOMUX_PAD(0x54c, 0x164, 1, 0x0000, 0, 0) +#define _MX51_PAD_NANDF_D11__SD3_DATA3 IOMUX_PAD(0x54c, 0x164, 5, 0x0948, 1, 0) +#define _MX51_PAD_NANDF_D10__GPIO3_30 IOMUX_PAD(0x550, 0x168, 3, 0x0000, 0, 0) +#define _MX51_PAD_NANDF_D10__NANDF_D10 IOMUX_PAD(0x550, 0x168, 0, 0x0000, 0, 0) +#define _MX51_PAD_NANDF_D10__PATA_DATA10 IOMUX_PAD(0x550, 0x168, 1, 0x0000, 0, 0) +#define _MX51_PAD_NANDF_D10__SD3_DATA2 IOMUX_PAD(0x550, 0x168, 5, 0x0944, 1, 0) +#define _MX51_PAD_NANDF_D9__FEC_RDATA0 IOMUX_PAD(0x554, 0x16c, 0x12, 0x0958, 0, 0) +#define _MX51_PAD_NANDF_D9__GPIO3_31 IOMUX_PAD(0x554, 0x16c, 3, 0x0000, 0, 0) +#define _MX51_PAD_NANDF_D9__NANDF_D9 IOMUX_PAD(0x554, 0x16c, 0, 0x0000, 0, 0) +#define _MX51_PAD_NANDF_D9__PATA_DATA9 IOMUX_PAD(0x554, 0x16c, 1, 0x0000, 0, 0) +#define _MX51_PAD_NANDF_D9__SD3_DATA1 IOMUX_PAD(0x554, 0x16c, 5, 0x0940, 1, 0) +#define _MX51_PAD_NANDF_D8__FEC_TDATA0 IOMUX_PAD(0x558, 0x170, 2, 0x0000, 0, 0) +#define _MX51_PAD_NANDF_D8__GPIO4_0 IOMUX_PAD(0x558, 0x170, 3, 0x0000, 0, 0) +#define _MX51_PAD_NANDF_D8__NANDF_D8 IOMUX_PAD(0x558, 0x170, 0, 0x0000, 0, 0) +#define _MX51_PAD_NANDF_D8__PATA_DATA8 IOMUX_PAD(0x558, 0x170, 1, 0x0000, 0, 0) +#define _MX51_PAD_NANDF_D8__SD3_DATA0 IOMUX_PAD(0x558, 0x170, 5, 0x093c, 1, 0) +#define _MX51_PAD_NANDF_D7__GPIO4_1 IOMUX_PAD(0x55c, 0x174, 3, 0x0000, 0, 0) +#define _MX51_PAD_NANDF_D7__NANDF_D7 IOMUX_PAD(0x55c, 0x174, 0, 0x0000, 0, 0) +#define _MX51_PAD_NANDF_D7__PATA_DATA7 IOMUX_PAD(0x55c, 0x174, 1, 0x0000, 0, 0) +#define _MX51_PAD_NANDF_D7__USBH3_DATA0 IOMUX_PAD(0x55c, 0x174, 5, 0x09fc, 0, 0) +#define _MX51_PAD_NANDF_D6__GPIO4_2 IOMUX_PAD(0x560, 0x178, 3, 0x0000, 0, 0) +#define _MX51_PAD_NANDF_D6__NANDF_D6 IOMUX_PAD(0x560, 0x178, 0, 0x0000, 0, 0) +#define _MX51_PAD_NANDF_D6__PATA_DATA6 IOMUX_PAD(0x560, 0x178, 1, 0x0000, 0, 0) +#define _MX51_PAD_NANDF_D6__SD4_LCTL IOMUX_PAD(0x560, 0x178, 2, 0x0000, 0, 0) +#define _MX51_PAD_NANDF_D6__USBH3_DATA1 IOMUX_PAD(0x560, 0x178, 5, 0x0a00, 0, 0) +#define _MX51_PAD_NANDF_D5__GPIO4_3 IOMUX_PAD(0x564, 0x17c, 3, 0x0000, 0, 0) +#define _MX51_PAD_NANDF_D5__NANDF_D5 IOMUX_PAD(0x564, 0x17c, 0, 0x0000, 0, 0) +#define _MX51_PAD_NANDF_D5__PATA_DATA5 IOMUX_PAD(0x564, 0x17c, 1, 0x0000, 0, 0) +#define _MX51_PAD_NANDF_D5__SD4_WP IOMUX_PAD(0x564, 0x17c, 2, 0x0000, 0, 0) +#define _MX51_PAD_NANDF_D5__USBH3_DATA2 IOMUX_PAD(0x564, 0x17c, 5, 0x0a04, 0, 0) +#define _MX51_PAD_NANDF_D4__GPIO4_4 IOMUX_PAD(0x568, 0x180, 3, 0x0000, 0, 0) +#define _MX51_PAD_NANDF_D4__NANDF_D4 IOMUX_PAD(0x568, 0x180, 0, 0x0000, 0, 0) +#define _MX51_PAD_NANDF_D4__PATA_DATA4 IOMUX_PAD(0x568, 0x180, 1, 0x0000, 0, 0) +#define _MX51_PAD_NANDF_D4__SD4_CD IOMUX_PAD(0x568, 0x180, 2, 0x0000, 0, 0) +#define _MX51_PAD_NANDF_D4__USBH3_DATA3 IOMUX_PAD(0x568, 0x180, 5, 0x0a08, 0, 0) +#define _MX51_PAD_NANDF_D3__GPIO4_5 IOMUX_PAD(0x56c, 0x184, 3, 0x0000, 0, 0) +#define _MX51_PAD_NANDF_D3__NANDF_D3 IOMUX_PAD(0x56c, 0x184, 0, 0x0000, 0, 0) +#define _MX51_PAD_NANDF_D3__PATA_DATA3 IOMUX_PAD(0x56c, 0x184, 1, 0x0000, 0, 0) +#define _MX51_PAD_NANDF_D3__SD4_DAT4 IOMUX_PAD(0x56c, 0x184, 2, 0x0000, 0, 0) +#define _MX51_PAD_NANDF_D3__USBH3_DATA4 IOMUX_PAD(0x56c, 0x184, 5, 0x0a0c, 0, 0) +#define _MX51_PAD_NANDF_D2__GPIO4_6 IOMUX_PAD(0x570, 0x188, 3, 0x0000, 0, 0) +#define _MX51_PAD_NANDF_D2__NANDF_D2 IOMUX_PAD(0x570, 0x188, 0, 0x0000, 0, 0) +#define _MX51_PAD_NANDF_D2__PATA_DATA2 IOMUX_PAD(0x570, 0x188, 1, 0x0000, 0, 0) +#define _MX51_PAD_NANDF_D2__SD4_DAT5 IOMUX_PAD(0x570, 0x188, 2, 0x0000, 0, 0) +#define _MX51_PAD_NANDF_D2__USBH3_DATA5 IOMUX_PAD(0x570, 0x188, 5, 0x0a10, 0, 0) +#define _MX51_PAD_NANDF_D1__GPIO4_7 IOMUX_PAD(0x574, 0x18c, 3, 0x0000, 0, 0) +#define _MX51_PAD_NANDF_D1__NANDF_D1 IOMUX_PAD(0x574, 0x18c, 0, 0x0000, 0, 0) +#define _MX51_PAD_NANDF_D1__PATA_DATA1 IOMUX_PAD(0x574, 0x18c, 1, 0x0000, 0, 0) +#define _MX51_PAD_NANDF_D1__SD4_DAT6 IOMUX_PAD(0x574, 0x18c, 2, 0x0000, 0, 0) +#define _MX51_PAD_NANDF_D1__USBH3_DATA6 IOMUX_PAD(0x574, 0x18c, 5, 0x0a14, 0, 0) +#define _MX51_PAD_NANDF_D0__GPIO4_8 IOMUX_PAD(0x578, 0x190, 3, 0x0000, 0, 0) +#define _MX51_PAD_NANDF_D0__NANDF_D0 IOMUX_PAD(0x578, 0x190, 0, 0x0000, 0, 0) +#define _MX51_PAD_NANDF_D0__PATA_DATA0 IOMUX_PAD(0x578, 0x190, 1, 0x0000, 0, 0) +#define _MX51_PAD_NANDF_D0__SD4_DAT7 IOMUX_PAD(0x578, 0x190, 2, 0x0000, 0, 0) +#define _MX51_PAD_NANDF_D0__USBH3_DATA7 IOMUX_PAD(0x578, 0x190, 5, 0x0a18, 0, 0) +#define _MX51_PAD_CSI1_D8__CSI1_D8 IOMUX_PAD(0x57c, 0x194, 0, 0x0000, 0, 0) +#define _MX51_PAD_CSI1_D8__GPIO3_12 IOMUX_PAD(0x57c, 0x194, 3, 0x0998, 1, 0) +#define _MX51_PAD_CSI1_D9__CSI1_D9 IOMUX_PAD(0x580, 0x198, 0, 0x0000, 0, 0) +#define _MX51_PAD_CSI1_D9__GPIO3_13 IOMUX_PAD(0x580, 0x198, 3, 0x0000, 0, 0) +#define _MX51_PAD_CSI1_D10__CSI1_D10 IOMUX_PAD(0x584, 0x19c, 0, 0x0000, 0, 0) +#define _MX51_PAD_CSI1_D11__CSI1_D11 IOMUX_PAD(0x588, 0x1a0, 0, 0x0000, 0, 0) +#define _MX51_PAD_CSI1_D12__CSI1_D12 IOMUX_PAD(0x58c, 0x1a4, 0, 0x0000, 0, 0) +#define _MX51_PAD_CSI1_D13__CSI1_D13 IOMUX_PAD(0x590, 0x1a8, 0, 0x0000, 0, 0) +#define _MX51_PAD_CSI1_D14__CSI1_D14 IOMUX_PAD(0x594, 0x1ac, 0, 0x0000, 0, 0) +#define _MX51_PAD_CSI1_D15__CSI1_D15 IOMUX_PAD(0x598, 0x1b0, 0, 0x0000, 0, 0) +#define _MX51_PAD_CSI1_D16__CSI1_D16 IOMUX_PAD(0x59c, 0x1b4, 0, 0x0000, 0, 0) +#define _MX51_PAD_CSI1_D17__CSI1_D17 IOMUX_PAD(0x5a0, 0x1b8, 0, 0x0000, 0, 0) +#define _MX51_PAD_CSI1_D18__CSI1_D18 IOMUX_PAD(0x5a4, 0x1bc, 0, 0x0000, 0, 0) +#define _MX51_PAD_CSI1_D19__CSI1_D19 IOMUX_PAD(0x5a8, 0x1c0, 0, 0x0000, 0, 0) +#define _MX51_PAD_CSI1_VSYNC__CSI1_VSYNC IOMUX_PAD(0x5ac, 0x1c4, 0, 0x0000, 0, 0) +#define _MX51_PAD_CSI1_VSYNC__GPIO3_14 IOMUX_PAD(0x5ac, 0x1c4, 3, 0x0000, 0, 0) +#define _MX51_PAD_CSI1_HSYNC__CSI1_HSYNC IOMUX_PAD(0x5b0, 0x1c8, 0, 0x0000, 0, 0) +#define _MX51_PAD_CSI1_HSYNC__GPIO3_15 IOMUX_PAD(0x5b0, 0x1c8, 3, 0x0000, 0, 0) +#define _MX51_PAD_CSI1_PIXCLK__CSI1_PIXCLK IOMUX_PAD(0x5b4, 0x000, 0, 0x0000, 0, 0) +#define _MX51_PAD_CSI1_MCLK__CSI1_MCLK IOMUX_PAD(0x5b8, 0x000, 0, 0x0000, 0, 0) +#define _MX51_PAD_CSI2_D12__CSI2_D12 IOMUX_PAD(0x5bc, 0x1cc, 0, 0x0000, 0, 0) +#define _MX51_PAD_CSI2_D12__GPIO4_9 IOMUX_PAD(0x5bc, 0x1cc, 3, 0x0000, 0, 0) +#define _MX51_PAD_CSI2_D13__CSI2_D13 IOMUX_PAD(0x5c0, 0x1d0, 0, 0x0000, 0, 0) +#define _MX51_PAD_CSI2_D13__GPIO4_10 IOMUX_PAD(0x5c0, 0x1d0, 3, 0x0000, 0, 0) +#define _MX51_PAD_CSI2_D14__CSI2_D14 IOMUX_PAD(0x5c4, 0x1d4, 0, 0x0000, 0, 0) +#define _MX51_PAD_CSI2_D15__CSI2_D15 IOMUX_PAD(0x5c8, 0x1d8, 0, 0x0000, 0, 0) +#define _MX51_PAD_CSI2_D16__CSI2_D16 IOMUX_PAD(0x5cc, 0x1dc, 0, 0x0000, 0, 0) +#define _MX51_PAD_CSI2_D17__CSI2_D17 IOMUX_PAD(0x5d0, 0x1e0, 0, 0x0000, 0, 0) +#define _MX51_PAD_CSI2_D18__CSI2_D18 IOMUX_PAD(0x5d4, 0x1e4, 0, 0x0000, 0, 0) +#define _MX51_PAD_CSI2_D18__GPIO4_11 IOMUX_PAD(0x5d4, 0x1e4, 3, 0x0000, 0, 0) +#define _MX51_PAD_CSI2_D19__CSI2_D19 IOMUX_PAD(0x5d8, 0x1e8, 0, 0x0000, 0, 0) +#define _MX51_PAD_CSI2_D19__GPIO4_12 IOMUX_PAD(0x5d8, 0x1e8, 3, 0x0000, 0, 0) +#define _MX51_PAD_CSI2_VSYNC__CSI2_VSYNC IOMUX_PAD(0x5dc, 0x1ec, 0, 0x0000, 0, 0) +#define _MX51_PAD_CSI2_VSYNC__GPIO4_13 IOMUX_PAD(0x5dc, 0x1ec, 3, 0x0000, 0, 0) +#define _MX51_PAD_CSI2_HSYNC__CSI2_HSYNC IOMUX_PAD(0x5e0, 0x1f0, 0, 0x0000, 0, 0) +#define _MX51_PAD_CSI2_HSYNC__GPIO4_14 IOMUX_PAD(0x5e0, 0x1f0, 3, 0x0000, 0, 0) +#define _MX51_PAD_CSI2_PIXCLK__CSI2_PIXCLK IOMUX_PAD(0x5e4, 0x1f4, 0, 0x0000, 0, 0) +#define _MX51_PAD_CSI2_PIXCLK__GPIO4_15 IOMUX_PAD(0x5e4, 0x1f4, 3, 0x0000, 0, 0) +#define _MX51_PAD_I2C1_CLK__GPIO4_16 IOMUX_PAD(0x5e8, 0x1f8, 3, 0x0000, 0, 0) +#define _MX51_PAD_I2C1_CLK__I2C1_CLK IOMUX_PAD(0x5e8, 0x1f8, 0x10, 0x0000, 0, 0) +#define _MX51_PAD_I2C1_DAT__GPIO4_17 IOMUX_PAD(0x5ec, 0x1fc, 3, 0x0000, 0, 0) +#define _MX51_PAD_I2C1_DAT__I2C1_DAT IOMUX_PAD(0x5ec, 0x1fc, 0x10, 0x0000, 0, 0) +#define _MX51_PAD_AUD3_BB_TXD__AUD3_TXD IOMUX_PAD(0x5f0, 0x200, 0, 0x0000, 0, 0) +#define _MX51_PAD_AUD3_BB_TXD__GPIO4_18 IOMUX_PAD(0x5f0, 0x200, 3, 0x0000, 0, 0) +#define _MX51_PAD_AUD3_BB_RXD__AUD3_RXD IOMUX_PAD(0x5f4, 0x204, 0, 0x0000, 0, 0) +#define _MX51_PAD_AUD3_BB_RXD__GPIO4_19 IOMUX_PAD(0x5f4, 0x204, 3, 0x0000, 0, 0) +#define _MX51_PAD_AUD3_BB_RXD__UART3_RXD IOMUX_PAD(0x5f4, 0x204, 1, 0x09f4, 2, 0) +#define _MX51_PAD_AUD3_BB_CK__AUD3_TXC IOMUX_PAD(0x5f8, 0x208, 0, 0x0000, 0, 0) +#define _MX51_PAD_AUD3_BB_CK__GPIO4_20 IOMUX_PAD(0x5f8, 0x208, 3, 0x0000, 0, 0) +#define _MX51_PAD_AUD3_BB_FS__AUD3_TXFS IOMUX_PAD(0x5fc, 0x20c, 0, 0x0000, 0, 0) +#define _MX51_PAD_AUD3_BB_FS__GPIO4_21 IOMUX_PAD(0x5fc, 0x20c, 3, 0x0000, 0, 0) +#define _MX51_PAD_AUD3_BB_FS__UART3_TXD IOMUX_PAD(0x5fc, 0x20c, 1, 0x0000, 0, 0) +#define _MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI IOMUX_PAD(0x600, 0x210, 0, 0x0000, 0, 0) +#define _MX51_PAD_CSPI1_MOSI__GPIO4_22 IOMUX_PAD(0x600, 0x210, 3, 0x0000, 0, 0) +#define _MX51_PAD_CSPI1_MOSI__I2C1_SDA IOMUX_PAD(0x600, 0x210, 0x11, 0x09b4, 1, 0) +#define _MX51_PAD_CSPI1_MISO__AUD4_RXD IOMUX_PAD(0x604, 0x214, 1, 0x08c4, 1, 0) +#define _MX51_PAD_CSPI1_MISO__ECSPI1_MISO IOMUX_PAD(0x604, 0x214, 0, 0x0000, 0, 0) +#define _MX51_PAD_CSPI1_MISO__GPIO4_23 IOMUX_PAD(0x604, 0x214, 3, 0x0000, 0, 0) +#define _MX51_PAD_CSPI1_SS0__AUD4_TXC IOMUX_PAD(0x608, 0x218, 1, 0x08cc, 1, 0) +#define _MX51_PAD_CSPI1_SS0__ECSPI1_SS0 IOMUX_PAD(0x608, 0x218, 0, 0x0000, 0, 0) +#define _MX51_PAD_CSPI1_SS0__GPIO4_24 IOMUX_PAD(0x608, 0x218, 3, 0x0000, 0, 0) +#define _MX51_PAD_CSPI1_SS1__AUD4_TXD IOMUX_PAD(0x60c, 0x21c, 1, 0x08c8, 1, 0) +#define _MX51_PAD_CSPI1_SS1__ECSPI1_SS1 IOMUX_PAD(0x60c, 0x21c, 0, 0x0000, 0, 0) +#define _MX51_PAD_CSPI1_SS1__GPIO4_25 IOMUX_PAD(0x60c, 0x21c, 3, 0x0000, 0, 0) +#define _MX51_PAD_CSPI1_RDY__AUD4_TXFS IOMUX_PAD(0x610, 0x220, 1, 0x08d0, 1, 0) +#define _MX51_PAD_CSPI1_RDY__ECSPI1_RDY IOMUX_PAD(0x610, 0x220, 0, 0x0000, 0, 0) +#define _MX51_PAD_CSPI1_RDY__GPIO4_26 IOMUX_PAD(0x610, 0x220, 3, 0x0000, 0, 0) +#define _MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK IOMUX_PAD(0x614, 0x224, 0, 0x0000, 0, 0) +#define _MX51_PAD_CSPI1_SCLK__GPIO4_27 IOMUX_PAD(0x614, 0x224, 3, 0x0000, 0, 0) +#define _MX51_PAD_CSPI1_SCLK__I2C1_SCL IOMUX_PAD(0x614, 0x224, 0x11, 0x09b0, 1, 0) +#define _MX51_PAD_UART1_RXD__GPIO4_28 IOMUX_PAD(0x618, 0x228, 3, 0x0000, 0, 0) +#define _MX51_PAD_UART1_RXD__UART1_RXD IOMUX_PAD(0x618, 0x228, 0, 0x09e4, 0, 0) +#define _MX51_PAD_UART1_TXD__GPIO4_29 IOMUX_PAD(0x61c, 0x22c, 3, 0x0000, 0, 0) +#define _MX51_PAD_UART1_TXD__PWM2_PWMO IOMUX_PAD(0x61c, 0x22c, 1, 0x0000, 0, 0) +#define _MX51_PAD_UART1_TXD__UART1_TXD IOMUX_PAD(0x61c, 0x22c, 0, 0x0000, 0, 0) +#define _MX51_PAD_UART1_RTS__GPIO4_30 IOMUX_PAD(0x620, 0x230, 3, 0x0000, 0, 0) +#define _MX51_PAD_UART1_RTS__UART1_RTS IOMUX_PAD(0x620, 0x230, 0, 0x09e0, 0, 0) +#define _MX51_PAD_UART1_CTS__GPIO4_31 IOMUX_PAD(0x624, 0x234, 3, 0x0000, 0, 0) +#define _MX51_PAD_UART1_CTS__UART1_CTS IOMUX_PAD(0x624, 0x234, 0, 0x0000, 0, 0) +#define _MX51_PAD_UART2_RXD__FIRI_TXD IOMUX_PAD(0x628, 0x238, 1, 0x0000, 0, 0) +#define _MX51_PAD_UART2_RXD__GPIO1_20 IOMUX_PAD(0x628, 0x238, 3, 0x0000, 0, 0) +#define _MX51_PAD_UART2_RXD__UART2_RXD IOMUX_PAD(0x628, 0x238, 0, 0x09ec, 2, 0) +#define _MX51_PAD_UART2_TXD__FIRI_RXD IOMUX_PAD(0x62c, 0x23c, 1, 0x0000, 0, 0) +#define _MX51_PAD_UART2_TXD__GPIO1_21 IOMUX_PAD(0x62c, 0x23c, 3, 0x0000, 0, 0) +#define _MX51_PAD_UART2_TXD__UART2_TXD IOMUX_PAD(0x62c, 0x23c, 0, 0x09ec, 3, 0) +#define _MX51_PAD_UART3_RXD__CSI1_D0 IOMUX_PAD(0x630, 0x240, 2, 0x0000, 0, 0) +#define _MX51_PAD_UART3_RXD__GPIO1_22 IOMUX_PAD(0x630, 0x240, 3, 0x0000, 0, 0) +#define _MX51_PAD_UART3_RXD__UART1_DTR IOMUX_PAD(0x630, 0x240, 0, 0x0000, 0, 0) +#define _MX51_PAD_UART3_RXD__UART3_RXD IOMUX_PAD(0x630, 0x240, 1, 0x09f4, 4, 0) +#define _MX51_PAD_UART3_TXD__CSI1_D1 IOMUX_PAD(0x634, 0x244, 2, 0x0000, 0, 0) +#define _MX51_PAD_UART3_TXD__GPIO1_23 IOMUX_PAD(0x634, 0x244, 3, 0x0000, 0, 0) +#define _MX51_PAD_UART3_TXD__UART1_DSR IOMUX_PAD(0x634, 0x244, 0, 0x0000, 0, 0) +#define _MX51_PAD_UART3_TXD__UART3_TXD IOMUX_PAD(0x634, 0x244, 1, 0x0000, 0, 0) +#define _MX51_PAD_OWIRE_LINE__GPIO1_24 IOMUX_PAD(0x638, 0x248, 3, 0x0000, 0, 0) +#define _MX51_PAD_OWIRE_LINE__OWIRE_LINE IOMUX_PAD(0x638, 0x248, 0, 0x0000, 0, 0) +#define _MX51_PAD_OWIRE_LINE__SPDIF_OUT IOMUX_PAD(0x638, 0x248, 6, 0x0000, 0, 0) +#define _MX51_PAD_KEY_ROW0__KEY_ROW0 IOMUX_PAD(0x63c, 0x24c, 0, 0x0000, 0, 0) +#define _MX51_PAD_KEY_ROW1__KEY_ROW1 IOMUX_PAD(0x640, 0x250, 0, 0x0000, 0, 0) +#define _MX51_PAD_KEY_ROW2__KEY_ROW2 IOMUX_PAD(0x644, 0x254, 0, 0x0000, 0, 0) +#define _MX51_PAD_KEY_ROW3__KEY_ROW3 IOMUX_PAD(0x648, 0x258, 0, 0x0000, 0, 0) +#define _MX51_PAD_KEY_COL0__KEY_COL0 IOMUX_PAD(0x64c, 0x25c, 0, 0x0000, 0, 0) +#define _MX51_PAD_KEY_COL0__PLL1_BYP IOMUX_PAD(0x64c, 0x25c, 7, 0x090c, 0, 0) +#define _MX51_PAD_KEY_COL1__KEY_COL1 IOMUX_PAD(0x650, 0x260, 0, 0x0000, 0, 0) +#define _MX51_PAD_KEY_COL1__PLL2_BYP IOMUX_PAD(0x650, 0x260, 7, 0x0910, 0, 0) +#define _MX51_PAD_KEY_COL2__KEY_COL2 IOMUX_PAD(0x654, 0x264, 0, 0x0000, 0, 0) +#define _MX51_PAD_KEY_COL2__PLL3_BYP IOMUX_PAD(0x654, 0x264, 7, 0x0000, 0, 0) +#define _MX51_PAD_KEY_COL3__KEY_COL3 IOMUX_PAD(0x658, 0x268, 0, 0x0000, 0, 0) +#define _MX51_PAD_KEY_COL4__I2C2_SCL IOMUX_PAD(0x65c, 0x26c, 0x13, 0x09b8, 1, 0) +#define _MX51_PAD_KEY_COL4__KEY_COL4 IOMUX_PAD(0x65c, 0x26c, 0, 0x0000, 0, 0) +#define _MX51_PAD_KEY_COL4__SPDIF_OUT1 IOMUX_PAD(0x65c, 0x26c, 6, 0x0000, 0, 0) +#define _MX51_PAD_KEY_COL4__UART1_RI IOMUX_PAD(0x65c, 0x26c, 1, 0x0000, 0, 0) +#define _MX51_PAD_KEY_COL4__UART3_RTS IOMUX_PAD(0x65c, 0x26c, 2, 0x09f0, 4, 0) +#define _MX51_PAD_KEY_COL5__I2C2_SDA IOMUX_PAD(0x660, 0x270, 0x13, 0x09bc, 1, 0) +#define _MX51_PAD_KEY_COL5__KEY_COL5 IOMUX_PAD(0x660, 0x270, 0, 0x0000, 0, 0) +#define _MX51_PAD_KEY_COL5__UART1_DCD IOMUX_PAD(0x660, 0x270, 1, 0x0000, 0, 0) +#define _MX51_PAD_KEY_COL5__UART3_CTS IOMUX_PAD(0x660, 0x270, 2, 0x0000, 0, 0) +#define _MX51_PAD_USBH1_CLK__CSPI_SCLK IOMUX_PAD(0x678, 0x278, 1, 0x0914, 1, 0) +#define _MX51_PAD_USBH1_CLK__GPIO1_25 IOMUX_PAD(0x678, 0x278, 2, 0x0000, 0, 0) +#define _MX51_PAD_USBH1_CLK__I2C2_SCL IOMUX_PAD(0x678, 0x278, 0x15, 0x09b8, 2, 0) +#define _MX51_PAD_USBH1_CLK__USBH1_CLK IOMUX_PAD(0x678, 0x278, 0, 0x0000, 0, 0) +#define _MX51_PAD_USBH1_DIR__CSPI_MOSI IOMUX_PAD(0x67c, 0x27c, 1, 0x091c, 1, 0) +#define _MX51_PAD_USBH1_DIR__GPIO1_26 IOMUX_PAD(0x67c, 0x27c, 2, 0x0000, 0, 0) +#define _MX51_PAD_USBH1_DIR__I2C2_SDA IOMUX_PAD(0x67c, 0x27c, 0x15, 0x09bc, 2, 0) +#define _MX51_PAD_USBH1_DIR__USBH1_DIR IOMUX_PAD(0x67c, 0x27c, 0, 0x0000, 0, 0) +#define _MX51_PAD_USBH1_STP__CSPI_RDY IOMUX_PAD(0x680, 0x280, 1, 0x0000, 0, 0) +#define _MX51_PAD_USBH1_STP__GPIO1_27 IOMUX_PAD(0x680, 0x280, 2, 0x0000, 0, 0) +#define _MX51_PAD_USBH1_STP__UART3_RXD IOMUX_PAD(0x680, 0x280, 5, 0x09f4, 6, 0) +#define _MX51_PAD_USBH1_STP__USBH1_STP IOMUX_PAD(0x680, 0x280, 0, 0x0000, 0, 0) +#define _MX51_PAD_USBH1_NXT__CSPI_MISO IOMUX_PAD(0x684, 0x284, 1, 0x0918, 0, 0) +#define _MX51_PAD_USBH1_NXT__GPIO1_28 IOMUX_PAD(0x684, 0x284, 2, 0x0000, 0, 0) +#define _MX51_PAD_USBH1_NXT__UART3_TXD IOMUX_PAD(0x684, 0x284, 5, 0x0000, 0, 0) +#define _MX51_PAD_USBH1_NXT__USBH1_NXT IOMUX_PAD(0x684, 0x284, 0, 0x0000, 0, 0) +#define _MX51_PAD_USBH1_DATA0__GPIO1_11 IOMUX_PAD(0x688, 0x288, 2, 0x0000, 0, 0) +#define _MX51_PAD_USBH1_DATA0__UART2_CTS IOMUX_PAD(0x688, 0x288, 1, 0x0000, 0, 0) +#define _MX51_PAD_USBH1_DATA0__USBH1_DATA0 IOMUX_PAD(0x688, 0x288, 0, 0x0000, 0, 0) +#define _MX51_PAD_USBH1_DATA1__GPIO1_12 IOMUX_PAD(0x68c, 0x28c, 2, 0x0000, 0, 0) +#define _MX51_PAD_USBH1_DATA1__UART2_RXD IOMUX_PAD(0x68c, 0x28c, 1, 0x09ec, 4, 0) +#define _MX51_PAD_USBH1_DATA1__USBH1_DATA1 IOMUX_PAD(0x68c, 0x28c, 0, 0x0000, 0, 0) +#define _MX51_PAD_USBH1_DATA2__GPIO1_13 IOMUX_PAD(0x690, 0x290, 2, 0x0000, 0, 0) +#define _MX51_PAD_USBH1_DATA2__UART2_TXD IOMUX_PAD(0x690, 0x290, 1, 0x09ec, 5, 0) +#define _MX51_PAD_USBH1_DATA2__USBH1_DATA2 IOMUX_PAD(0x690, 0x290, 0, 0x0000, 0, 0) +#define _MX51_PAD_USBH1_DATA3__GPIO1_14 IOMUX_PAD(0x694, 0x294, 2, 0x0000, 0, 0) +#define _MX51_PAD_USBH1_DATA3__UART2_RTS IOMUX_PAD(0x694, 0x294, 1, 0x09e8, 5, 0) +#define _MX51_PAD_USBH1_DATA3__USBH1_DATA3 IOMUX_PAD(0x694, 0x294, 0, 0x0000, 0, 0) +#define _MX51_PAD_USBH1_DATA4__CSPI_SS0 IOMUX_PAD(0x698, 0x298, 1, 0x0000, 0, 0) +#define _MX51_PAD_USBH1_DATA4__GPIO1_15 IOMUX_PAD(0x698, 0x298, 2, 0x0000, 0, 0) +#define _MX51_PAD_USBH1_DATA4__USBH1_DATA4 IOMUX_PAD(0x698, 0x298, 0, 0x0000, 0, 0) +#define _MX51_PAD_USBH1_DATA5__CSPI_SS1 IOMUX_PAD(0x69c, 0x29c, 1, 0x0920, 0, 0) +#define _MX51_PAD_USBH1_DATA5__GPIO1_16 IOMUX_PAD(0x69c, 0x29c, 2, 0x0000, 0, 0) +#define _MX51_PAD_USBH1_DATA5__USBH1_DATA5 IOMUX_PAD(0x69c, 0x29c, 0, 0x0000, 0, 0) +#define _MX51_PAD_USBH1_DATA6__CSPI_SS3 IOMUX_PAD(0x6a0, 0x2a0, 1, 0x0928, 1, 0) +#define _MX51_PAD_USBH1_DATA6__GPIO1_17 IOMUX_PAD(0x6a0, 0x2a0, 2, 0x0000, 0, 0) +#define _MX51_PAD_USBH1_DATA6__USBH1_DATA6 IOMUX_PAD(0x6a0, 0x2a0, 0, 0x0000, 0, 0) +#define _MX51_PAD_USBH1_DATA7__ECSPI1_SS3 IOMUX_PAD(0x6a4, 0x2a4, 1, 0x0000, 0, 0) +#define _MX51_PAD_USBH1_DATA7__ECSPI2_SS3 IOMUX_PAD(0x6a4, 0x2a4, 5, 0x0934, 1, 0) +#define _MX51_PAD_USBH1_DATA7__GPIO1_18 IOMUX_PAD(0x6a4, 0x2a4, 2, 0x0000, 0, 0) +#define _MX51_PAD_USBH1_DATA7__USBH1_DATA7 IOMUX_PAD(0x6a4, 0x2a4, 0, 0x0000, 0, 0) +#define _MX51_PAD_DI1_PIN11__DI1_PIN11 IOMUX_PAD(0x6a8, 0x2a8, 0, 0x0000, 0, 0) +#define _MX51_PAD_DI1_PIN11__ECSPI1_SS2 IOMUX_PAD(0x6a8, 0x2a8, 7, 0x0000, 0, 0) +#define _MX51_PAD_DI1_PIN11__GPIO3_0 IOMUX_PAD(0x6a8, 0x2a8, 4, 0x0000, 0, 0) +#define _MX51_PAD_DI1_PIN12__DI1_PIN12 IOMUX_PAD(0x6ac, 0x2ac, 0, 0x0000, 0, 0) +#define _MX51_PAD_DI1_PIN12__GPIO3_1 IOMUX_PAD(0x6ac, 0x2ac, 4, 0x0978, 1, 0) +#define _MX51_PAD_DI1_PIN13__DI1_PIN13 IOMUX_PAD(0x6b0, 0x2b0, 0, 0x0000, 0, 0) +#define _MX51_PAD_DI1_PIN13__GPIO3_2 IOMUX_PAD(0x6b0, 0x2b0, 4, 0x097c, 1, 0) +#define _MX51_PAD_DI1_D0_CS__DI1_D0_CS IOMUX_PAD(0x6b4, 0x2b4, 0, 0x0000, 0, 0) +#define _MX51_PAD_DI1_D0_CS__GPIO3_3 IOMUX_PAD(0x6b4, 0x2b4, 4, 0x0980, 1, 0) +#define _MX51_PAD_DI1_D1_CS__DI1_D1_CS IOMUX_PAD(0x6b8, 0x2b8, 0, 0x0000, 0, 0) +#define _MX51_PAD_DI1_D1_CS__DISP1_PIN14 IOMUX_PAD(0x6b8, 0x2b8, 2, 0x0000, 0, 0) +#define _MX51_PAD_DI1_D1_CS__DISP1_PIN5 IOMUX_PAD(0x6b8, 0x2b8, 3, 0x0000, 0, 0) +#define _MX51_PAD_DI1_D1_CS__GPIO3_4 IOMUX_PAD(0x6b8, 0x2b8, 4, 0x0984, 1, 0) +#define _MX51_PAD_DISPB2_SER_DIN__DISP1_PIN1 IOMUX_PAD(0x6bc, 0x2bc, 2, 0x09a4, 1, 0) +#define _MX51_PAD_DISPB2_SER_DIN__DISPB2_SER_DIN IOMUX_PAD(0x6bc, 0x2bc, 0, 0x09c4, 0, 0) +#define _MX51_PAD_DISPB2_SER_DIN__GPIO3_5 IOMUX_PAD(0x6bc, 0x2bc, 4, 0x0988, 1, 0) +#define _MX51_PAD_DISPB2_SER_DIO__DISP1_PIN6 IOMUX_PAD(0x6c0, 0x2c0, 3, 0x0000, 0, 0) +#define _MX51_PAD_DISPB2_SER_DIO__DISPB2_SER_DIO IOMUX_PAD(0x6c0, 0x2c0, 0, 0x09c4, 1, 0) +#define _MX51_PAD_DISPB2_SER_DIO__GPIO3_6 IOMUX_PAD(0x6c0, 0x2c0, 4, 0x098c, 1, 0) +#define _MX51_PAD_DISPB2_SER_CLK__DISP1_PIN17 IOMUX_PAD(0x6c4, 0x2c4, 2, 0x0000, 0, 0) +#define _MX51_PAD_DISPB2_SER_CLK__DISP1_PIN7 IOMUX_PAD(0x6c4, 0x2c4, 3, 0x0000, 0, 0) +#define _MX51_PAD_DISPB2_SER_CLK__DISPB2_SER_CLK IOMUX_PAD(0x6c4, 0x2c4, 0, 0x0000, 0, 0) +#define _MX51_PAD_DISPB2_SER_CLK__GPIO3_7 IOMUX_PAD(0x6c4, 0x2c4, 4, 0x0990, 1, 0) +#define _MX51_PAD_DISPB2_SER_RS__DISP1_EXT_CLK IOMUX_PAD(0x6c8, 0x2c8, 2, 0x0000, 0, 0) +#define _MX51_PAD_DISPB2_SER_RS__DISP1_PIN16 IOMUX_PAD(0x6c8, 0x2c8, 2, 0x0000, 0, 0) +#define _MX51_PAD_DISPB2_SER_RS__DISP1_PIN8 IOMUX_PAD(0x6c8, 0x2c8, 3, 0x0000, 0, 0) +#define _MX51_PAD_DISPB2_SER_RS__DISPB2_SER_RS IOMUX_PAD(0x6c8, 0x2c8, 0, 0x0000, 0, 0) +#define _MX51_PAD_DISPB2_SER_RS__DISPB2_SER_RS IOMUX_PAD(0x6c8, 0x2c8, 0, 0x0000, 0, 0) +#define _MX51_PAD_DISPB2_SER_RS__GPIO3_8 IOMUX_PAD(0x6c8, 0x2c8, 4, 0x0994, 1, 0) +#define _MX51_PAD_DISP1_DAT0__DISP1_DAT0 IOMUX_PAD(0x6cc, 0x2cc, 0, 0x0000, 0, 0) +#define _MX51_PAD_DISP1_DAT1__DISP1_DAT1 IOMUX_PAD(0x6d0, 0x2d0, 0, 0x0000, 0, 0) +#define _MX51_PAD_DISP1_DAT2__DISP1_DAT2 IOMUX_PAD(0x6d4, 0x2d4, 0, 0x0000, 0, 0) +#define _MX51_PAD_DISP1_DAT3__DISP1_DAT3 IOMUX_PAD(0x6d8, 0x2d8, 0, 0x0000, 0, 0) +#define _MX51_PAD_DISP1_DAT4__DISP1_DAT4 IOMUX_PAD(0x6dc, 0x2dc, 0, 0x0000, 0, 0) +#define _MX51_PAD_DISP1_DAT5__DISP1_DAT5 IOMUX_PAD(0x6e0, 0x2e0, 0, 0x0000, 0, 0) +#define _MX51_PAD_DISP1_DAT6__BOOT_USB_SRC IOMUX_PAD(0x6e4, 0x2e4, 7, 0x0000, 0, 0) +#define _MX51_PAD_DISP1_DAT6__DISP1_DAT6 IOMUX_PAD(0x6e4, 0x2e4, 0, 0x0000, 0, 0) +#define _MX51_PAD_DISP1_DAT7__BOOT_EEPROM_CFG IOMUX_PAD(0x6e8, 0x2e8, 7, 0x0000, 0, 0) +#define _MX51_PAD_DISP1_DAT7__DISP1_DAT7 IOMUX_PAD(0x6e8, 0x2e8, 0, 0x0000, 0, 0) +#define _MX51_PAD_DISP1_DAT8__BOOT_SRC0 IOMUX_PAD(0x6ec, 0x2ec, 7, 0x0000, 0, 0) +#define _MX51_PAD_DISP1_DAT8__DISP1_DAT8 IOMUX_PAD(0x6ec, 0x2ec, 0, 0x0000, 0, 0) +#define _MX51_PAD_DISP1_DAT9__BOOT_SRC1 IOMUX_PAD(0x6f0, 0x2f0, 7, 0x0000, 0, 0) +#define _MX51_PAD_DISP1_DAT9__DISP1_DAT9 IOMUX_PAD(0x6f0, 0x2f0, 0, 0x0000, 0, 0) +#define _MX51_PAD_DISP1_DAT10__BOOT_SPARE_SIZE IOMUX_PAD(0x6f4, 0x2f4, 7, 0x0000, 0, 0) +#define _MX51_PAD_DISP1_DAT10__DISP1_DAT10 IOMUX_PAD(0x6f4, 0x2f4, 0, 0x0000, 0, 0) +#define _MX51_PAD_DISP1_DAT11__BOOT_LPB_FREQ2 IOMUX_PAD(0x6f8, 0x2f8, 7, 0x0000, 0, 0) +#define _MX51_PAD_DISP1_DAT11__DISP1_DAT11 IOMUX_PAD(0x6f8, 0x2f8, 0, 0x0000, 0, 0) +#define _MX51_PAD_DISP1_DAT12__BOOT_MLC_SEL IOMUX_PAD(0x6fc, 0x2fc, 7, 0x0000, 0, 0) +#define _MX51_PAD_DISP1_DAT12__DISP1_DAT12 IOMUX_PAD(0x6fc, 0x2fc, 0, 0x0000, 0, 0) +#define _MX51_PAD_DISP1_DAT13__BOOT_MEM_CTL0 IOMUX_PAD(0x700, 0x300, 7, 0x0000, 0, 0) +#define _MX51_PAD_DISP1_DAT13__DISP1_DAT13 IOMUX_PAD(0x700, 0x300, 0, 0x0000, 0, 0) +#define _MX51_PAD_DISP1_DAT14__BOOT_MEM_CTL1 IOMUX_PAD(0x704, 0x304, 7, 0x0000, 0, 0) +#define _MX51_PAD_DISP1_DAT14__DISP1_DAT14 IOMUX_PAD(0x704, 0x304, 0, 0x0000, 0, 0) +#define _MX51_PAD_DISP1_DAT15__BOOT_BUS_WIDTH IOMUX_PAD(0x708, 0x308, 7, 0x0000, 0, 0) +#define _MX51_PAD_DISP1_DAT15__DISP1_DAT15 IOMUX_PAD(0x708, 0x308, 0, 0x0000, 0, 0) +#define _MX51_PAD_DISP1_DAT16__BOOT_PAGE_SIZE0 IOMUX_PAD(0x70c, 0x30c, 7, 0x0000, 0, 0) +#define _MX51_PAD_DISP1_DAT16__DISP1_DAT16 IOMUX_PAD(0x70c, 0x30c, 0, 0x0000, 0, 0) +#define _MX51_PAD_DISP1_DAT17__BOOT_PAGE_SIZE1 IOMUX_PAD(0x710, 0x310, 7, 0x0000, 0, 0) +#define _MX51_PAD_DISP1_DAT17__DISP1_DAT17 IOMUX_PAD(0x710, 0x310, 0, 0x0000, 0, 0) +#define _MX51_PAD_DISP1_DAT18__BOOT_WEIM_MUXED0 IOMUX_PAD(0x714, 0x314, 7, 0x0000, 0, 0) +#define _MX51_PAD_DISP1_DAT18__DISP1_DAT18 IOMUX_PAD(0x714, 0x314, 0, 0x0000, 0, 0) +#define _MX51_PAD_DISP1_DAT18__DISP2_PIN11 IOMUX_PAD(0x714, 0x314, 5, 0x0000, 0, 0) +#define _MX51_PAD_DISP1_DAT18__DISP2_PIN5 IOMUX_PAD(0x714, 0x314, 4, 0x0000, 0, 0) +#define _MX51_PAD_DISP1_DAT19__BOOT_WEIM_MUXED1 IOMUX_PAD(0x718, 0x318, 7, 0x0000, 0, 0) +#define _MX51_PAD_DISP1_DAT19__DISP1_DAT19 IOMUX_PAD(0x718, 0x318, 0, 0x0000, 0, 0) +#define _MX51_PAD_DISP1_DAT19__DISP2_PIN12 IOMUX_PAD(0x718, 0x318, 5, 0x0000, 0, 0) +#define _MX51_PAD_DISP1_DAT19__DISP2_PIN6 IOMUX_PAD(0x718, 0x318, 4, 0x0000, 0, 0) +#define _MX51_PAD_DISP1_DAT20__BOOT_MEM_TYPE0 IOMUX_PAD(0x71c, 0x31c, 7, 0x0000, 0, 0) +#define _MX51_PAD_DISP1_DAT20__DISP1_DAT20 IOMUX_PAD(0x71c, 0x31c, 0, 0x0000, 0, 0) +#define _MX51_PAD_DISP1_DAT20__DISP2_PIN13 IOMUX_PAD(0x71c, 0x31c, 5, 0x0000, 0, 0) +#define _MX51_PAD_DISP1_DAT20__DISP2_PIN7 IOMUX_PAD(0x71c, 0x31c, 4, 0x0000, 0, 0) +#define _MX51_PAD_DISP1_DAT21__BOOT_MEM_TYPE1 IOMUX_PAD(0x720, 0x320, 7, 0x0000, 0, 0) +#define _MX51_PAD_DISP1_DAT21__DISP1_DAT21 IOMUX_PAD(0x720, 0x320, 0, 0x0000, 0, 0) +#define _MX51_PAD_DISP1_DAT21__DISP2_PIN14 IOMUX_PAD(0x720, 0x320, 5, 0x0000, 0, 0) +#define _MX51_PAD_DISP1_DAT21__DISP2_PIN8 IOMUX_PAD(0x720, 0x320, 4, 0x0000, 0, 0) +#define _MX51_PAD_DISP1_DAT22__BOOT_LPB_FREQ0 IOMUX_PAD(0x724, 0x324, 7, 0x0000, 0, 0) +#define _MX51_PAD_DISP1_DAT22__DISP1_DAT22 IOMUX_PAD(0x724, 0x324, 0, 0x0000, 0, 0) +#define _MX51_PAD_DISP1_DAT22__DISP2_D0_CS IOMUX_PAD(0x724, 0x324, 6, 0x0000, 0, 0) +#define _MX51_PAD_DISP1_DAT22__DISP2_DAT16 IOMUX_PAD(0x724, 0x324, 5, 0x0000, 0, 0) +#define _MX51_PAD_DISP1_DAT23__BOOT_LPB_FREQ1 IOMUX_PAD(0x728, 0x328, 7, 0x0000, 0, 0) +#define _MX51_PAD_DISP1_DAT23__DISP1_DAT23 IOMUX_PAD(0x728, 0x328, 0, 0x0000, 0, 0) +#define _MX51_PAD_DISP1_DAT23__DISP2_D1_CS IOMUX_PAD(0x728, 0x328, 6, 0x0000, 0, 0) +#define _MX51_PAD_DISP1_DAT23__DISP2_DAT17 IOMUX_PAD(0x728, 0x328, 5, 0x0000, 0, 0) +#define _MX51_PAD_DISP1_DAT23__DISP2_SER_CS IOMUX_PAD(0x728, 0x328, 4, 0x0000, 0, 0) +#define _MX51_PAD_DI1_PIN3__DI1_PIN3 IOMUX_PAD(0x72c, 0x32c, 0, 0x0000, 0, 0) +#define _MX51_PAD_DI1_PIN2__DI1_PIN2 IOMUX_PAD(0x734, 0x330, 0, 0x0000, 0, 0) +#define _MX51_PAD_DI_GP2__DISP1_SER_CLK IOMUX_PAD(0x740, 0x338, 0, 0x0000, 0, 0) +#define _MX51_PAD_DI_GP2__DISP2_WAIT IOMUX_PAD(0x740, 0x338, 2, 0x09a8, 1, 0) +#define _MX51_PAD_DI_GP3__CSI1_DATA_EN IOMUX_PAD(0x744, 0x33c, 3, 0x09a0, 1, 0) +#define _MX51_PAD_DI_GP3__DISP1_SER_DIO IOMUX_PAD(0x744, 0x33c, 0, 0x09c0, 0, 0) +#define _MX51_PAD_DI_GP3__FEC_TX_ER IOMUX_PAD(0x744, 0x33c, 2, 0x0000, 0, 0) +#define _MX51_PAD_DI2_PIN4__CSI2_DATA_EN IOMUX_PAD(0x748, 0x340, 3, 0x099c, 1, 0) +#define _MX51_PAD_DI2_PIN4__DI2_PIN4 IOMUX_PAD(0x748, 0x340, 0, 0x0000, 0, 0) +#define _MX51_PAD_DI2_PIN4__FEC_CRS IOMUX_PAD(0x748, 0x340, 2, 0x0950, 1, 0) +#define _MX51_PAD_DI2_PIN2__DI2_PIN2 IOMUX_PAD(0x74c, 0x344, 0, 0x0000, 0, 0) +#define _MX51_PAD_DI2_PIN2__FEC_MDC IOMUX_PAD(0x74c, 0x344, 2, 0x0000, 0, 0) +#define _MX51_PAD_DI2_PIN3__DI2_PIN3 IOMUX_PAD(0x750, 0x348, 0, 0x0000, 0, 0) +#define _MX51_PAD_DI2_PIN3__FEC_MDIO IOMUX_PAD(0x750, 0x348, 2, 0x0954, 1, 0) +#define _MX51_PAD_DI2_DISP_CLK__DI2_DISP_CLK IOMUX_PAD(0x754, 0x34c, 0, 0x0000, 0, 0) +#define _MX51_PAD_DI2_DISP_CLK__FEC_RDATA1 IOMUX_PAD(0x754, 0x34c, 2, 0x095c, 1, 0) +#define _MX51_PAD_DI_GP4__DI2_PIN15 IOMUX_PAD(0x758, 0x350, 4, 0x0000, 0, 0) +#define _MX51_PAD_DI_GP4__DISP1_SER_DIN IOMUX_PAD(0x758, 0x350, 0, 0x09c0, 1, 0) +#define _MX51_PAD_DI_GP4__DISP2_PIN1 IOMUX_PAD(0x758, 0x350, 3, 0x0000, 0, 0) +#define _MX51_PAD_DI_GP4__FEC_RDATA2 IOMUX_PAD(0x758, 0x350, 2, 0x0960, 1, 0) +#define _MX51_PAD_DISP2_DAT0__DISP2_DAT0 IOMUX_PAD(0x75c, 0x354, 0, 0x0000, 0, 0) +#define _MX51_PAD_DISP2_DAT0__FEC_RDATA3 IOMUX_PAD(0x75c, 0x354, 2, 0x0964, 1, 0) +#define _MX51_PAD_DISP2_DAT0__KEY_COL6 IOMUX_PAD(0x75c, 0x354, 4, 0x09c8, 1, 0) +#define _MX51_PAD_DISP2_DAT0__UART3_RXD IOMUX_PAD(0x75c, 0x354, 5, 0x09f4, 8, 0) +#define _MX51_PAD_DISP2_DAT0__USBH3_CLK IOMUX_PAD(0x75c, 0x354, 3, 0x09f8, 1, 0) +#define _MX51_PAD_DISP2_DAT1__DISP2_DAT1 IOMUX_PAD(0x760, 0x358, 0, 0x0000, 0, 0) +#define _MX51_PAD_DISP2_DAT1__FEC_RX_ER IOMUX_PAD(0x760, 0x358, 2, 0x0970, 1, 0) +#define _MX51_PAD_DISP2_DAT1__KEY_COL7 IOMUX_PAD(0x760, 0x358, 4, 0x09cc, 1, 0) +#define _MX51_PAD_DISP2_DAT1__UART3_TXD IOMUX_PAD(0x760, 0x358, 5, 0x0000, 0, 0) +#define _MX51_PAD_DISP2_DAT1__USBH3_DIR IOMUX_PAD(0x760, 0x358, 3, 0x0a1c, 1, 0) +#define _MX51_PAD_DISP2_DAT2__DISP2_DAT2 IOMUX_PAD(0x764, 0x35c, 0, 0x0000, 0, 0) +#define _MX51_PAD_DISP2_DAT3__DISP2_DAT3 IOMUX_PAD(0x768, 0x360, 0, 0x0000, 0, 0) +#define _MX51_PAD_DISP2_DAT4__DISP2_DAT4 IOMUX_PAD(0x76c, 0x364, 0, 0x0000, 0, 0) +#define _MX51_PAD_DISP2_DAT5__DISP2_DAT5 IOMUX_PAD(0x770, 0x368, 0, 0x0000, 0, 0) +#define _MX51_PAD_DISP2_DAT6__DISP2_DAT6 IOMUX_PAD(0x774, 0x36c, 0, 0x0000, 0, 0) +#define _MX51_PAD_DISP2_DAT6__FEC_TDATA1 IOMUX_PAD(0x774, 0x36c, 2, 0x0000, 0, 0) +#define _MX51_PAD_DISP2_DAT6__GPIO1_19 IOMUX_PAD(0x774, 0x36c, 5, 0x0000, 0, 0) +#define _MX51_PAD_DISP2_DAT6__KEY_ROW4 IOMUX_PAD(0x774, 0x36c, 4, 0x09d0, 1, 0) +#define _MX51_PAD_DISP2_DAT6__USBH3_STP IOMUX_PAD(0x774, 0x36c, 3, 0x0a24, 1, 0) +#define _MX51_PAD_DISP2_DAT7__DISP2_DAT7 IOMUX_PAD(0x778, 0x370, 0, 0x0000, 0, 0) +#define _MX51_PAD_DISP2_DAT7__FEC_TDATA2 IOMUX_PAD(0x778, 0x370, 2, 0x0000, 0, 0) +#define _MX51_PAD_DISP2_DAT7__GPIO1_29 IOMUX_PAD(0x778, 0x370, 5, 0x0000, 0, 0) +#define _MX51_PAD_DISP2_DAT7__KEY_ROW5 IOMUX_PAD(0x778, 0x370, 4, 0x09d4, 1, 0) +#define _MX51_PAD_DISP2_DAT7__USBH3_NXT IOMUX_PAD(0x778, 0x370, 3, 0x0a20, 1, 0) +#define _MX51_PAD_DISP2_DAT8__DISP2_DAT8 IOMUX_PAD(0x77c, 0x374, 0, 0x0000, 0, 0) +#define _MX51_PAD_DISP2_DAT8__FEC_TDATA3 IOMUX_PAD(0x77c, 0x374, 2, 0x0000, 0, 0) +#define _MX51_PAD_DISP2_DAT8__GPIO1_30 IOMUX_PAD(0x77c, 0x374, 5, 0x0000, 0, 0) +#define _MX51_PAD_DISP2_DAT8__KEY_ROW6 IOMUX_PAD(0x77c, 0x374, 4, 0x09d8, 1, 0) +#define _MX51_PAD_DISP2_DAT8__USBH3_DATA0 IOMUX_PAD(0x77c, 0x374, 3, 0x09fc, 1, 0) +#define _MX51_PAD_DISP2_DAT9__AUD6_RXC IOMUX_PAD(0x780, 0x378, 4, 0x08f4, 1, 0) +#define _MX51_PAD_DISP2_DAT9__DISP2_DAT9 IOMUX_PAD(0x780, 0x378, 0, 0x0000, 0, 0) +#define _MX51_PAD_DISP2_DAT9__FEC_TX_EN IOMUX_PAD(0x780, 0x378, 2, 0x0000, 0, 0) +#define _MX51_PAD_DISP2_DAT9__GPIO1_31 IOMUX_PAD(0x780, 0x378, 5, 0x0000, 0, 0) +#define _MX51_PAD_DISP2_DAT9__USBH3_DATA1 IOMUX_PAD(0x780, 0x378, 3, 0x0a00, 1, 0) +#define _MX51_PAD_DISP2_DAT10__DISP2_DAT10 IOMUX_PAD(0x784, 0x37c, 0, 0x0000, 0, 0) +#define _MX51_PAD_DISP2_DAT10__DISP2_SER_CS IOMUX_PAD(0x784, 0x37c, 5, 0x0000, 0, 0) +#define _MX51_PAD_DISP2_DAT10__FEC_COL IOMUX_PAD(0x784, 0x37c, 2, 0x094c, 1, 0) +#define _MX51_PAD_DISP2_DAT10__KEY_ROW7 IOMUX_PAD(0x784, 0x37c, 4, 0x09dc, 1, 0) +#define _MX51_PAD_DISP2_DAT10__USBH3_DATA2 IOMUX_PAD(0x784, 0x37c, 3, 0x0a04, 1, 0) +#define _MX51_PAD_DISP2_DAT11__AUD6_TXD IOMUX_PAD(0x788, 0x380, 4, 0x08f0, 1, 0) +#define _MX51_PAD_DISP2_DAT11__DISP2_DAT11 IOMUX_PAD(0x788, 0x380, 0, 0x0000, 0, 0) +#define _MX51_PAD_DISP2_DAT11__FEC_RX_CLK IOMUX_PAD(0x788, 0x380, 2, 0x0968, 1, 0) +#define _MX51_PAD_DISP2_DAT11__GPIO1_10 IOMUX_PAD(0x788, 0x380, 7, 0x0000, 0, 0) +#define _MX51_PAD_DISP2_DAT11__USBH3_DATA3 IOMUX_PAD(0x788, 0x380, 3, 0x0a08, 1, 0) +#define _MX51_PAD_DISP2_DAT12__AUD6_RXD IOMUX_PAD(0x78c, 0x384, 4, 0x08ec, 1, 0) +#define _MX51_PAD_DISP2_DAT12__DISP2_DAT12 IOMUX_PAD(0x78c, 0x384, 0, 0x0000, 0, 0) +#define _MX51_PAD_DISP2_DAT12__FEC_RX_DV IOMUX_PAD(0x78c, 0x384, 2, 0x096c, 1, 0) +#define _MX51_PAD_DISP2_DAT12__USBH3_DATA4 IOMUX_PAD(0x78c, 0x384, 3, 0x0a0c, 1, 0) +#define _MX51_PAD_DISP2_DAT13__AUD6_TXC IOMUX_PAD(0x790, 0x388, 4, 0x08fc, 1, 0) +#define _MX51_PAD_DISP2_DAT13__DISP2_DAT13 IOMUX_PAD(0x790, 0x388, 0, 0x0000, 0, 0) +#define _MX51_PAD_DISP2_DAT13__FEC_TX_CLK IOMUX_PAD(0x790, 0x388, 2, 0x0974, 1, 0) +#define _MX51_PAD_DISP2_DAT13__USBH3_DATA5 IOMUX_PAD(0x790, 0x388, 3, 0x0a10, 1, 0) +#define _MX51_PAD_DISP2_DAT14__AUD6_TXFS IOMUX_PAD(0x794, 0x38c, 4, 0x0900, 1, 0) +#define _MX51_PAD_DISP2_DAT14__DISP2_DAT14 IOMUX_PAD(0x794, 0x38c, 0, 0x0000, 0, 0) +#define _MX51_PAD_DISP2_DAT14__FEC_RDATA0 IOMUX_PAD(0x794, 0x38c, 2, 0x0958, 1, 0) +#define _MX51_PAD_DISP2_DAT14__USBH3_DATA6 IOMUX_PAD(0x794, 0x38c, 3, 0x0a14, 1, 0) +#define _MX51_PAD_DISP2_DAT15__AUD6_RXFS IOMUX_PAD(0x798, 0x390, 4, 0x08f8, 1, 0) +#define _MX51_PAD_DISP2_DAT15__DISP1_SER_CS IOMUX_PAD(0x798, 0x390, 5, 0x0000, 0, 0) +#define _MX51_PAD_DISP2_DAT15__DISP2_DAT15 IOMUX_PAD(0x798, 0x390, 0, 0x0000, 0, 0) +#define _MX51_PAD_DISP2_DAT15__FEC_TDATA0 IOMUX_PAD(0x798, 0x390, 2, 0x0000, 0, 0) +#define _MX51_PAD_DISP2_DAT15__USBH3_DATA7 IOMUX_PAD(0x798, 0x390, 3, 0x0a18, 1, 0) +#define _MX51_PAD_SD1_CMD__AUD5_RXFS IOMUX_PAD(0x79c, 0x394, 1, 0x08e0, 1, 0) +#define _MX51_PAD_SD1_CMD__CSPI_MOSI IOMUX_PAD(0x79c, 0x394, 2, 0x091c, 2, 0) +#define _MX51_PAD_SD1_CMD__SD1_CMD IOMUX_PAD(0x79c, 0x394, 0x10, 0x0000, 0, 0) +#define _MX51_PAD_SD1_CLK__AUD5_RXC IOMUX_PAD(0x7a0, 0x398, 1, 0x08dc, 1, 0) +#define _MX51_PAD_SD1_CLK__CSPI_SCLK IOMUX_PAD(0x7a0, 0x398, 2, 0x0914, 2, 0) +#define _MX51_PAD_SD1_CLK__SD1_CLK IOMUX_PAD(0x7a0, 0x398, 0x10, 0x0000, 0, 0) +#define _MX51_PAD_SD1_DATA0__AUD5_TXD IOMUX_PAD(0x7a4, 0x39c, 1, 0x08d8, 2, 0) +#define _MX51_PAD_SD1_DATA0__CSPI_MISO IOMUX_PAD(0x7a4, 0x39c, 2, 0x0918, 1, 0) +#define _MX51_PAD_SD1_DATA0__SD1_DATA0 IOMUX_PAD(0x7a4, 0x39c, 0x10, 0x0000, 0, 0) +#define _MX51_PAD_EIM_DA0__EIM_DA0 IOMUX_PAD(0x000, 0x01c, 0, 0x0000, 0, 0) +#define _MX51_PAD_EIM_DA1__EIM_DA1 IOMUX_PAD(0x000, 0x020, 0, 0x0000, 0, 0) +#define _MX51_PAD_EIM_DA2__EIM_DA2 IOMUX_PAD(0x000, 0x024, 0, 0x0000, 0, 0) +#define _MX51_PAD_EIM_DA3__EIM_DA3 IOMUX_PAD(0x000, 0x028, 0, 0x0000, 0, 0) +#define _MX51_PAD_SD1_DATA1__AUD5_RXD IOMUX_PAD(0x7a8, 0x3a0, 1, 0x08d4, 2, 0) +#define _MX51_PAD_SD1_DATA1__SD1_DATA1 IOMUX_PAD(0x7a8, 0x3a0, 0x10, 0x0000, 0, 0) +#define _MX51_PAD_EIM_DA4__EIM_DA4 IOMUX_PAD(0x000, 0x02c, 0, 0x0000, 0, 0) +#define _MX51_PAD_EIM_DA5__EIM_DA5 IOMUX_PAD(0x000, 0x030, 0, 0x0000, 0, 0) +#define _MX51_PAD_EIM_DA6__EIM_DA6 IOMUX_PAD(0x000, 0x034, 0, 0x0000, 0, 0) +#define _MX51_PAD_EIM_DA7__EIM_DA7 IOMUX_PAD(0x000, 0x038, 0, 0x0000, 0, 0) +#define _MX51_PAD_SD1_DATA2__AUD5_TXC IOMUX_PAD(0x7ac, 0x3a4, 1, 0x08e4, 2, 0) +#define _MX51_PAD_SD1_DATA2__SD1_DATA2 IOMUX_PAD(0x7ac, 0x3a4, 0x10, 0x0000, 0, 0) +#define _MX51_PAD_EIM_DA10__EIM_DA10 IOMUX_PAD(0x000, 0x044, 0, 0x0000, 0, 0) +#define _MX51_PAD_EIM_DA11__EIM_DA11 IOMUX_PAD(0x000, 0x048, 0, 0x0000, 0, 0) +#define _MX51_PAD_EIM_DA8__EIM_DA8 IOMUX_PAD(0x000, 0x03c, 0, 0x0000, 0, 0) +#define _MX51_PAD_EIM_DA9__EIM_DA9 IOMUX_PAD(0x000, 0x040, 0, 0x0000, 0, 0) +#define _MX51_PAD_SD1_DATA3__AUD5_TXFS IOMUX_PAD(0x7b0, 0x3a8, 1, 0x08e8, 2, 0) +#define _MX51_PAD_SD1_DATA3__CSPI_SS1 IOMUX_PAD(0x7b0, 0x3a8, 2, 0x0920, 1, 0) +#define _MX51_PAD_SD1_DATA3__SD1_DATA3 IOMUX_PAD(0x7b0, 0x3a8, 0x10, 0x0000, 0, 0) +#define _MX51_PAD_GPIO1_0__CSPI_SS2 IOMUX_PAD(0x7b4, 0x3ac, 2, 0x0924, 0, 0) +#define _MX51_PAD_GPIO1_0__GPIO1_0 IOMUX_PAD(0x7b4, 0x3ac, 1, 0x0000, 0, 0) +#define _MX51_PAD_GPIO1_0__SD1_CD IOMUX_PAD(0x7b4, 0x3ac, 0, 0x0000, 0, 0) +#define _MX51_PAD_GPIO1_1__CSPI_MISO IOMUX_PAD(0x7b8, 0x3b0, 2, 0x0918, 2, 0) +#define _MX51_PAD_GPIO1_1__GPIO1_1 IOMUX_PAD(0x7b8, 0x3b0, 1, 0x0000, 0, 0) +#define _MX51_PAD_GPIO1_1__SD1_WP IOMUX_PAD(0x7b8, 0x3b0, 0, 0x0000, 0, 0) +#define _MX51_PAD_EIM_DA12__EIM_DA12 IOMUX_PAD(0x000, 0x04c, 0, 0x0000, 0, 0) +#define _MX51_PAD_EIM_DA13__EIM_DA13 IOMUX_PAD(0x000, 0x050, 0, 0x0000, 0, 0) +#define _MX51_PAD_EIM_DA14__EIM_DA14 IOMUX_PAD(0x000, 0x054, 0, 0x0000, 0, 0) +#define _MX51_PAD_EIM_DA15__EIM_DA15 IOMUX_PAD(0x000, 0x058, 0, 0x0000, 0, 0) +#define _MX51_PAD_SD2_CMD__CSPI_MOSI IOMUX_PAD(0x000, 0x3b4, 2, 0x091c, 3, 0) +#define _MX51_PAD_SD2_CMD__I2C1_SCL IOMUX_PAD(0x7bc, 0x3b4, 0x11, 0x09b0, 2, 0) +#define _MX51_PAD_SD2_CMD__SD2_CMD IOMUX_PAD(0x7bc, 0x3b4, 0x10, 0x0000, 0, 0) +#define _MX51_PAD_SD2_CLK__CSPI_SCLK IOMUX_PAD(0x7c0, 0x3b8, 2, 0x0914, 3, 0) +#define _MX51_PAD_SD2_CLK__I2C1_SDA IOMUX_PAD(0x7c0, 0x3b8, 0x11, 0x09b4, 2, 0) +#define _MX51_PAD_SD2_CLK__SD2_CLK IOMUX_PAD(0x7c0, 0x3b8, 0x10, 0x0000, 0, 0) +#define _MX51_PAD_SD2_DATA0__CSPI_MISO IOMUX_PAD(0x7c4, 0x3bc, 2, 0x0918, 3, 0) +#define _MX51_PAD_SD2_DATA0__SD1_DAT4 IOMUX_PAD(0x7c4, 0x3bc, 1, 0x0000, 0, 0) +#define _MX51_PAD_SD2_DATA0__SD2_DATA0 IOMUX_PAD(0x7c4, 0x3bc, 0x10, 0x0000, 0, 0) +#define _MX51_PAD_SD2_DATA1__SD1_DAT5 IOMUX_PAD(0x7c8, 0x3c0, 1, 0x0000, 0, 0) +#define _MX51_PAD_SD2_DATA1__SD2_DATA1 IOMUX_PAD(0x7c8, 0x3c0, 0x10, 0x0000, 0, 0) +#define _MX51_PAD_SD2_DATA1__USBH3_H2_DP IOMUX_PAD(0x7c8, 0x3c0, 2, 0x0000, 0, 0) +#define _MX51_PAD_SD2_DATA2__SD1_DAT6 IOMUX_PAD(0x7cc, 0x3c4, 1, 0x0000, 0, 0) +#define _MX51_PAD_SD2_DATA2__SD2_DATA2 IOMUX_PAD(0x7cc, 0x3c4, 0x10, 0x0000, 0, 0) +#define _MX51_PAD_SD2_DATA2__USBH3_H2_DM IOMUX_PAD(0x7cc, 0x3c4, 2, 0x0000, 0, 0) +#define _MX51_PAD_SD2_DATA3__CSPI_SS2 IOMUX_PAD(0x7d0, 0x3c8, 2, 0x0924, 1, 0) +#define _MX51_PAD_SD2_DATA3__SD1_DAT7 IOMUX_PAD(0x7d0, 0x3c8, 1, 0x0000, 0, 0) +#define _MX51_PAD_SD2_DATA3__SD2_DATA3 IOMUX_PAD(0x7d0, 0x3c8, 0x10, 0x0000, 0, 0) +#define _MX51_PAD_GPIO1_2__CCM_OUT_2 IOMUX_PAD(0x7d4, 0x3cc, 5, 0x0000, 0, 0) +#define _MX51_PAD_GPIO1_2__GPIO1_2 IOMUX_PAD(0x7d4, 0x3cc, 0, 0x0000, 0, 0) +#define _MX51_PAD_GPIO1_2__I2C2_SCL IOMUX_PAD(0x7d4, 0x3cc, 0x12, 0x09b8, 3, 0) +#define _MX51_PAD_GPIO1_2__PLL1_BYP IOMUX_PAD(0x7d4, 0x3cc, 7, 0x090c, 1, 0) +#define _MX51_PAD_GPIO1_2__PWM1_PWMO IOMUX_PAD(0x7d4, 0x3cc, 1, 0x0000, 0, 0) +#define _MX51_PAD_GPIO1_3__GPIO1_3 IOMUX_PAD(0x7d8, 0x3d0, 0, 0x0000, 0, 0) +#define _MX51_PAD_GPIO1_3__I2C2_SDA IOMUX_PAD(0x7d8, 0x3d0, 0x12, 0x09bc, 3, 0) +#define _MX51_PAD_GPIO1_3__PLL2_BYP IOMUX_PAD(0x7d8, 0x3d0, 7, 0x0910, 1, 0) +#define _MX51_PAD_GPIO1_3__PWM2_PWMO IOMUX_PAD(0x7d8, 0x3d0, 1, 0x0000, 0, 0) +#define _MX51_PAD_PMIC_INT_REQ__PMIC_INT_REQ IOMUX_PAD(0x7fc, 0x3d4, 0, 0x0000, 0, 0) +#define _MX51_PAD_PMIC_INT_REQ__PMIC_PMU_IRQ_B IOMUX_PAD(0x7fc, 0x3d4, 1, 0x0000, 0, 0) +#define _MX51_PAD_GPIO1_4__DISP2_EXT_CLK IOMUX_PAD(0x804, 0x3d8, 4, 0x0908, 1, 0) +#define _MX51_PAD_GPIO1_4__EIM_RDY IOMUX_PAD(0x804, 0x3d8, 3, 0x0938, 1, 0) +#define _MX51_PAD_GPIO1_4__GPIO1_4 IOMUX_PAD(0x804, 0x3d8, 0, 0x0000, 0, 0) +#define _MX51_PAD_GPIO1_4__WDOG1_WDOG_B IOMUX_PAD(0x804, 0x3d8, 2, 0x0000, 0, 0) +#define _MX51_PAD_GPIO1_5__CSI2_MCLK IOMUX_PAD(0x808, 0x3dc, 6, 0x0000, 0, 0) +#define _MX51_PAD_GPIO1_5__DISP2_PIN16 IOMUX_PAD(0x808, 0x3dc, 3, 0x0000, 0, 0) +#define _MX51_PAD_GPIO1_5__GPIO1_5 IOMUX_PAD(0x808, 0x3dc, 0, 0x0000, 0, 0) +#define _MX51_PAD_GPIO1_5__WDOG2_WDOG_B IOMUX_PAD(0x808, 0x3dc, 2, 0x0000, 0, 0) +#define _MX51_PAD_GPIO1_6__DISP2_PIN17 IOMUX_PAD(0x80c, 0x3e0, 4, 0x0000, 0, 0) +#define _MX51_PAD_GPIO1_6__GPIO1_6 IOMUX_PAD(0x80c, 0x3e0, 0, 0x0000, 0, 0) +#define _MX51_PAD_GPIO1_6__REF_EN_B IOMUX_PAD(0x80c, 0x3e0, 3, 0x0000, 0, 0) +#define _MX51_PAD_GPIO1_7__CCM_OUT_0 IOMUX_PAD(0x810, 0x3e4, 3, 0x0000, 0, 0) +#define _MX51_PAD_GPIO1_7__GPIO1_7 IOMUX_PAD(0x810, 0x3e4, 0, 0x0000, 0, 0) +#define _MX51_PAD_GPIO1_7__SD2_WP IOMUX_PAD(0x810, 0x3e4, 6, 0x0000, 0, 0) +#define _MX51_PAD_GPIO1_7__SPDIF_OUT1 IOMUX_PAD(0x810, 0x3e4, 2, 0x0000, 0, 0) +#define _MX51_PAD_GPIO1_8__CSI2_DATA_EN IOMUX_PAD(0x814, 0x3e8, 2, 0x099c, 2, 0) +#define _MX51_PAD_GPIO1_8__GPIO1_8 IOMUX_PAD(0x814, 0x3e8, 0, 0x0000, 0, 0) +#define _MX51_PAD_GPIO1_8__SD2_CD IOMUX_PAD(0x814, 0x3e8, 6, 0x0000, 0, 0) +#define _MX51_PAD_GPIO1_8__USBH3_PWR IOMUX_PAD(0x814, 0x3e8, 1, 0x0000, 0, 0) +#define _MX51_PAD_GPIO1_9__CCM_OUT_1 IOMUX_PAD(0x818, 0x3ec, 3, 0x0000, 0, 0) +#define _MX51_PAD_GPIO1_9__DISP2_D1_CS IOMUX_PAD(0x818, 0x3ec, 2, 0x0000, 0, 0) +#define _MX51_PAD_GPIO1_9__DISP2_SER_CS IOMUX_PAD(0x818, 0x3ec, 7, 0x0000, 0, 0) +#define _MX51_PAD_GPIO1_9__GPIO1_9 IOMUX_PAD(0x818, 0x3ec, 0, 0x0000, 0, 0) +#define _MX51_PAD_GPIO1_9__SD2_LCTL IOMUX_PAD(0x818, 0x3ec, 6, 0x0000, 0, 0) +#define _MX51_PAD_GPIO1_9__USBH3_OC IOMUX_PAD(0x818, 0x3ec, 1, 0x0000, 0, 0) + +/* The same pins as above but with the default pad control values applied */ +#define MX51_PAD_EIM_D16__AUD4_RXFS (_MX51_PAD_EIM_D16__AUD4_RXFS | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_EIM_D16__AUD5_TXD (_MX51_PAD_EIM_D16__AUD5_TXD | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_EIM_D16__EIM_D16 (_MX51_PAD_EIM_D16__EIM_D16 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_EIM_D16__GPIO2_0 (_MX51_PAD_EIM_D16__GPIO2_0 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL)) +#define MX51_PAD_EIM_D16__I2C1_SDA (_MX51_PAD_EIM_D16__I2C1_SDA | MUX_PAD_CTRL(MX51_I2C_PAD_CTRL)) +#define MX51_PAD_EIM_D16__UART2_CTS (_MX51_PAD_EIM_D16__UART2_CTS | MUX_PAD_CTRL(MX51_UART_PAD_CTRL)) +#define MX51_PAD_EIM_D16__USBH2_DATA0 (_MX51_PAD_EIM_D16__USBH2_DATA0 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_EIM_D17__AUD5_RXD (_MX51_PAD_EIM_D17__AUD5_RXD | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_EIM_D17__EIM_D17 (_MX51_PAD_EIM_D17__EIM_D17 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_EIM_D17__GPIO2_1 (_MX51_PAD_EIM_D17__GPIO2_1 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL)) +#define MX51_PAD_EIM_D17__UART2_RXD (_MX51_PAD_EIM_D17__UART2_RXD | MUX_PAD_CTRL(MX51_UART_PAD_CTRL)) +#define MX51_PAD_EIM_D17__UART3_CTS (_MX51_PAD_EIM_D17__UART3_CTS | MUX_PAD_CTRL(MX51_UART_PAD_CTRL)) +#define MX51_PAD_EIM_D17__USBH2_DATA1 (_MX51_PAD_EIM_D17__USBH2_DATA1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_EIM_D18__AUD5_TXC (_MX51_PAD_EIM_D18__AUD5_TXC | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_EIM_D18__EIM_D18 (_MX51_PAD_EIM_D18__EIM_D18 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_EIM_D18__GPIO2_2 (_MX51_PAD_EIM_D18__GPIO2_2 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL)) +#define MX51_PAD_EIM_D18__UART2_TXD (_MX51_PAD_EIM_D18__UART2_TXD | MUX_PAD_CTRL(MX51_UART_PAD_CTRL)) +#define MX51_PAD_EIM_D18__UART3_RTS (_MX51_PAD_EIM_D18__UART3_RTS | MUX_PAD_CTRL(MX51_UART_PAD_CTRL)) +#define MX51_PAD_EIM_D18__USBH2_DATA2 (_MX51_PAD_EIM_D18__USBH2_DATA2 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_EIM_D19__AUD4_RXC (_MX51_PAD_EIM_D19__AUD4_RXC | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_EIM_D19__AUD5_TXFS (_MX51_PAD_EIM_D19__AUD5_TXFS | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_EIM_D19__EIM_D19 (_MX51_PAD_EIM_D19__EIM_D19 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_EIM_D19__GPIO2_3 (_MX51_PAD_EIM_D19__GPIO2_3 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL)) +#define MX51_PAD_EIM_D19__I2C1_SCL (_MX51_PAD_EIM_D19__I2C1_SCL | MUX_PAD_CTRL(MX51_I2C_PAD_CTRL)) +#define MX51_PAD_EIM_D19__UART2_RTS (_MX51_PAD_EIM_D19__UART2_RTS | MUX_PAD_CTRL(MX51_UART_PAD_CTRL)) +#define MX51_PAD_EIM_D19__USBH2_DATA3 (_MX51_PAD_EIM_D19__USBH2_DATA3 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_EIM_D20__AUD4_TXD (_MX51_PAD_EIM_D20__AUD4_TXD | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_EIM_D20__EIM_D20 (_MX51_PAD_EIM_D20__EIM_D20 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_EIM_D20__GPIO2_4 (_MX51_PAD_EIM_D20__GPIO2_4 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL)) +#define MX51_PAD_EIM_D20__SRTC_ALARM_DEB (_MX51_PAD_EIM_D20__SRTC_ALARM_DEB | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_EIM_D20__USBH2_DATA4 (_MX51_PAD_EIM_D20__USBH2_DATA4 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_EIM_D21__AUD4_RXD (_MX51_PAD_EIM_D21__AUD4_RXD | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_EIM_D21__EIM_D21 (_MX51_PAD_EIM_D21__EIM_D21 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_EIM_D21__GPIO2_5 (_MX51_PAD_EIM_D21__GPIO2_5 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL)) +#define MX51_PAD_EIM_D21__SRTC_ALARM_DEB (_MX51_PAD_EIM_D21__SRTC_ALARM_DEB | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_EIM_D21__USBH2_DATA5 (_MX51_PAD_EIM_D21__USBH2_DATA5 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_EIM_D22__AUD4_TXC (_MX51_PAD_EIM_D22__AUD4_TXC | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_EIM_D22__EIM_D22 (_MX51_PAD_EIM_D22__EIM_D22 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_EIM_D22__GPIO2_6 (_MX51_PAD_EIM_D22__GPIO2_6 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL)) +#define MX51_PAD_EIM_D22__USBH2_DATA6 (_MX51_PAD_EIM_D22__USBH2_DATA6 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_EIM_D23__AUD4_TXFS (_MX51_PAD_EIM_D23__AUD4_TXFS | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_EIM_D23__EIM_D23 (_MX51_PAD_EIM_D23__EIM_D23 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_EIM_D23__GPIO2_7 (_MX51_PAD_EIM_D23__GPIO2_7 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL)) +#define MX51_PAD_EIM_D23__SPDIF_OUT1 (_MX51_PAD_EIM_D23__SPDIF_OUT1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_EIM_D23__USBH2_DATA7 (_MX51_PAD_EIM_D23__USBH2_DATA7 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_EIM_D24__AUD6_RXFS (_MX51_PAD_EIM_D24__AUD6_RXFS | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_EIM_D24__EIM_D24 (_MX51_PAD_EIM_D24__EIM_D24 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_EIM_D24__GPIO2_8 (_MX51_PAD_EIM_D24__GPIO2_8 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL)) +#define MX51_PAD_EIM_D24__I2C2_SDA (_MX51_PAD_EIM_D24__I2C2_SDA | MUX_PAD_CTRL(MX51_I2C_PAD_CTRL)) +#define MX51_PAD_EIM_D24__UART3_CTS (_MX51_PAD_EIM_D24__UART3_CTS | MUX_PAD_CTRL(MX51_UART_PAD_CTRL)) +#define MX51_PAD_EIM_D24__USBOTG_DATA0 (_MX51_PAD_EIM_D24__USBOTG_DATA0 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_EIM_D25__EIM_D25 (_MX51_PAD_EIM_D25__EIM_D25 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_EIM_D25__KEY_COL6 (_MX51_PAD_EIM_D25__KEY_COL6 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_EIM_D25__UART2_CTS (_MX51_PAD_EIM_D25__UART2_CTS | MUX_PAD_CTRL(MX51_UART_PAD_CTRL)) +#define MX51_PAD_EIM_D25__UART3_RXD (_MX51_PAD_EIM_D25__UART3_RXD | MUX_PAD_CTRL(MX51_UART_PAD_CTRL)) +#define MX51_PAD_EIM_D25__USBOTG_DATA1 (_MX51_PAD_EIM_D25__USBOTG_DATA1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_EIM_D26__EIM_D26 (_MX51_PAD_EIM_D26__EIM_D26 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_EIM_D26__KEY_COL7 (_MX51_PAD_EIM_D26__KEY_COL7 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_EIM_D26__UART2_RTS (_MX51_PAD_EIM_D26__UART2_RTS | MUX_PAD_CTRL(MX51_UART_PAD_CTRL)) +#define MX51_PAD_EIM_D26__UART3_TXD (_MX51_PAD_EIM_D26__UART3_TXD | MUX_PAD_CTRL(MX51_UART_PAD_CTRL)) +#define MX51_PAD_EIM_D26__USBOTG_DATA2 (_MX51_PAD_EIM_D26__USBOTG_DATA2 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_EIM_D27__AUD6_RXC (_MX51_PAD_EIM_D27__AUD6_RXC | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_EIM_D27__EIM_D27 (_MX51_PAD_EIM_D27__EIM_D27 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_EIM_D27__GPIO2_9 (_MX51_PAD_EIM_D27__GPIO2_9 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL)) +#define MX51_PAD_EIM_D27__I2C2_SCL (_MX51_PAD_EIM_D27__I2C2_SCL | MUX_PAD_CTRL(MX51_I2C_PAD_CTRL)) +#define MX51_PAD_EIM_D27__UART3_RTS (_MX51_PAD_EIM_D27__UART3_RTS | MUX_PAD_CTRL(MX51_UART_PAD_CTRL)) +#define MX51_PAD_EIM_D27__USBOTG_DATA3 (_MX51_PAD_EIM_D27__USBOTG_DATA3 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_EIM_D28__AUD6_TXD (_MX51_PAD_EIM_D28__AUD6_TXD | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_EIM_D28__EIM_D28 (_MX51_PAD_EIM_D28__EIM_D28 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_EIM_D28__KEY_ROW4 (_MX51_PAD_EIM_D28__KEY_ROW4 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_EIM_D28__USBOTG_DATA4 (_MX51_PAD_EIM_D28__USBOTG_DATA4 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_EIM_D29__AUD6_RXD (_MX51_PAD_EIM_D29__AUD6_RXD | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_EIM_D29__EIM_D29 (_MX51_PAD_EIM_D29__EIM_D29 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_EIM_D29__KEY_ROW5 (_MX51_PAD_EIM_D29__KEY_ROW5 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_EIM_D29__USBOTG_DATA5 (_MX51_PAD_EIM_D29__USBOTG_DATA5 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_EIM_D30__AUD6_TXC (_MX51_PAD_EIM_D30__AUD6_TXC | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_EIM_D30__EIM_D30 (_MX51_PAD_EIM_D30__EIM_D30 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_EIM_D30__KEY_ROW6 (_MX51_PAD_EIM_D30__KEY_ROW6 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_EIM_D30__USBOTG_DATA6 (_MX51_PAD_EIM_D30__USBOTG_DATA6 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_EIM_D31__AUD6_TXFS (_MX51_PAD_EIM_D31__AUD6_TXFS | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_EIM_D31__EIM_D31 (_MX51_PAD_EIM_D31__EIM_D31 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_EIM_D31__KEY_ROW7 (_MX51_PAD_EIM_D31__KEY_ROW7 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_EIM_D31__USBOTG_DATA7 (_MX51_PAD_EIM_D31__USBOTG_DATA7 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_EIM_A16__EIM_A16 (_MX51_PAD_EIM_A16__EIM_A16 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_EIM_A16__GPIO2_10 (_MX51_PAD_EIM_A16__GPIO2_10 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL)) +#define MX51_PAD_EIM_A16__OSC_FREQ_SEL0 (_MX51_PAD_EIM_A16__OSC_FREQ_SEL0 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_EIM_A17__EIM_A17 (_MX51_PAD_EIM_A17__EIM_A17 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_EIM_A17__GPIO2_11 (_MX51_PAD_EIM_A17__GPIO2_11 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL)) +#define MX51_PAD_EIM_A17__OSC_FREQ_SEL1 (_MX51_PAD_EIM_A17__OSC_FREQ_SEL1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_EIM_A18__BOOT_LPB0 (_MX51_PAD_EIM_A18__BOOT_LPB0 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_EIM_A18__EIM_A18 (_MX51_PAD_EIM_A18__EIM_A18 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_EIM_A18__GPIO2_12 (_MX51_PAD_EIM_A18__GPIO2_12 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL)) +#define MX51_PAD_EIM_A19__BOOT_LPB1 (_MX51_PAD_EIM_A19__BOOT_LPB1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_EIM_A19__EIM_A19 (_MX51_PAD_EIM_A19__EIM_A19 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_EIM_A19__GPIO2_13 (_MX51_PAD_EIM_A19__GPIO2_13 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL)) +#define MX51_PAD_EIM_A20__BOOT_UART_SRC0 (_MX51_PAD_EIM_A20__BOOT_UART_SRC0 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_EIM_A20__EIM_A20 (_MX51_PAD_EIM_A20__EIM_A20 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_EIM_A20__GPIO2_14 (_MX51_PAD_EIM_A20__GPIO2_14 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL)) +#define MX51_PAD_EIM_A21__BOOT_UART_SRC1 (_MX51_PAD_EIM_A21__BOOT_UART_SRC1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_EIM_A21__EIM_A21 (_MX51_PAD_EIM_A21__EIM_A21 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_EIM_A21__GPIO2_15 (_MX51_PAD_EIM_A21__GPIO2_15 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL)) +#define MX51_PAD_EIM_A22__EIM_A22 (_MX51_PAD_EIM_A22__EIM_A22 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_EIM_A22__GPIO2_16 (_MX51_PAD_EIM_A22__GPIO2_16 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL)) +#define MX51_PAD_EIM_A23__BOOT_HPN_EN (_MX51_PAD_EIM_A23__BOOT_HPN_EN | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_EIM_A23__EIM_A23 (_MX51_PAD_EIM_A23__EIM_A23 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_EIM_A23__GPIO2_17 (_MX51_PAD_EIM_A23__GPIO2_17 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL)) +#define MX51_PAD_EIM_A24__EIM_A24 (_MX51_PAD_EIM_A24__EIM_A24 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_EIM_A24__GPIO2_18 (_MX51_PAD_EIM_A24__GPIO2_18 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL)) +#define MX51_PAD_EIM_A24__USBH2_CLK (_MX51_PAD_EIM_A24__USBH2_CLK | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_EIM_A25__DISP1_PIN4 (_MX51_PAD_EIM_A25__DISP1_PIN4 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_EIM_A25__EIM_A25 (_MX51_PAD_EIM_A25__EIM_A25 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_EIM_A25__GPIO2_19 (_MX51_PAD_EIM_A25__GPIO2_19 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL)) +#define MX51_PAD_EIM_A25__USBH2_DIR (_MX51_PAD_EIM_A25__USBH2_DIR | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_EIM_A26__CSI1_DATA_EN (_MX51_PAD_EIM_A26__CSI1_DATA_EN | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_EIM_A26__DISP2_EXT_CLK (_MX51_PAD_EIM_A26__DISP2_EXT_CLK | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_EIM_A26__EIM_A26 (_MX51_PAD_EIM_A26__EIM_A26 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_EIM_A26__GPIO2_20 (_MX51_PAD_EIM_A26__GPIO2_20 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL)) +#define MX51_PAD_EIM_A26__USBH2_STP (_MX51_PAD_EIM_A26__USBH2_STP | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_EIM_A27__CSI2_DATA_EN (_MX51_PAD_EIM_A27__CSI2_DATA_EN | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_EIM_A27__DISP1_PIN1 (_MX51_PAD_EIM_A27__DISP1_PIN1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_EIM_A27__EIM_A27 (_MX51_PAD_EIM_A27__EIM_A27 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_EIM_A27__GPIO2_21 (_MX51_PAD_EIM_A27__GPIO2_21 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL)) +#define MX51_PAD_EIM_A27__USBH2_NXT (_MX51_PAD_EIM_A27__USBH2_NXT | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_EIM_EB0__EIM_EB0 (_MX51_PAD_EIM_EB0__EIM_EB0 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_EIM_EB1__EIM_EB1 (_MX51_PAD_EIM_EB1__EIM_EB1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_EIM_EB2__AUD5_RXFS (_MX51_PAD_EIM_EB2__AUD5_RXFS | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_EIM_EB2__CSI1_D2 (_MX51_PAD_EIM_EB2__CSI1_D2 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_EIM_EB2__EIM_EB2 (_MX51_PAD_EIM_EB2__EIM_EB2 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_EIM_EB2__FEC_MDIO (_MX51_PAD_EIM_EB2__FEC_MDIO | \ + MUX_PAD_CTRL(PAD_CTL_PUS_22K_UP | PAD_CTL_PKE | PAD_CTL_SRE_FAST | \ + PAD_CTL_DSE_HIGH | PAD_CTL_PUE | PAD_CTL_HYS)) +#define MX51_PAD_EIM_EB2__GPIO2_22 (_MX51_PAD_EIM_EB2__GPIO2_22 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL)) +#define MX51_PAD_EIM_EB2__GPT_CMPOUT1 (_MX51_PAD_EIM_EB2__GPT_CMPOUT1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_EIM_EB3__AUD5_RXC (_MX51_PAD_EIM_EB3__AUD5_RXC | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_EIM_EB3__CSI1_D3 (_MX51_PAD_EIM_EB3__CSI1_D3 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_EIM_EB3__EIM_EB3 (_MX51_PAD_EIM_EB3__EIM_EB3 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_EIM_EB3__FEC_RDATA1 (_MX51_PAD_EIM_EB3__FEC_RDATA1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_EIM_EB3__GPIO2_23 (_MX51_PAD_EIM_EB3__GPIO2_23 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL)) +#define MX51_PAD_EIM_EB3__GPT_CMPOUT2 (_MX51_PAD_EIM_EB3__GPT_CMPOUT2 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_EIM_OE__EIM_OE (_MX51_PAD_EIM_OE__EIM_OE | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_EIM_OE__GPIO2_24 (_MX51_PAD_EIM_OE__GPIO2_24 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL)) +#define MX51_PAD_EIM_CS0__EIM_CS0 (_MX51_PAD_EIM_CS0__EIM_CS0 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_EIM_CS0__GPIO2_25 (_MX51_PAD_EIM_CS0__GPIO2_25 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL)) +#define MX51_PAD_EIM_CS1__EIM_CS1 (_MX51_PAD_EIM_CS1__EIM_CS1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_EIM_CS1__GPIO2_26 (_MX51_PAD_EIM_CS1__GPIO2_26 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL)) +#define MX51_PAD_EIM_CS2__AUD5_TXD (_MX51_PAD_EIM_CS2__AUD5_TXD | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_EIM_CS2__CSI1_D4 (_MX51_PAD_EIM_CS2__CSI1_D4 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_EIM_CS2__EIM_CS2 (_MX51_PAD_EIM_CS2__EIM_CS2 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_EIM_CS2__FEC_RDATA2 (_MX51_PAD_EIM_CS2__FEC_RDATA2 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_EIM_CS2__GPIO2_27 (_MX51_PAD_EIM_CS2__GPIO2_27 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL)) +#define MX51_PAD_EIM_CS2__USBOTG_STP (_MX51_PAD_EIM_CS2__USBOTG_STP | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_EIM_CS3__AUD5_RXD (_MX51_PAD_EIM_CS3__AUD5_RXD | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_EIM_CS3__CSI1_D5 (_MX51_PAD_EIM_CS3__CSI1_D5 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_EIM_CS3__EIM_CS3 (_MX51_PAD_EIM_CS3__EIM_CS3 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_EIM_CS3__FEC_RDATA3 (_MX51_PAD_EIM_CS3__FEC_RDATA3 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_EIM_CS3__GPIO2_28 (_MX51_PAD_EIM_CS3__GPIO2_28 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL)) +#define MX51_PAD_EIM_CS3__USBOTG_NXT (_MX51_PAD_EIM_CS3__USBOTG_NXT | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_EIM_CS4__AUD5_TXC (_MX51_PAD_EIM_CS4__AUD5_TXC | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_EIM_CS4__CSI1_D6 (_MX51_PAD_EIM_CS4__CSI1_D6 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_EIM_CS4__EIM_CS4 (_MX51_PAD_EIM_CS4__EIM_CS4 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_EIM_CS4__FEC_RX_ER (_MX51_PAD_EIM_CS4__FEC_RX_ER | MUX_PAD_CTRL(MX51_PAD_CTRL_2)) +#define MX51_PAD_EIM_CS4__GPIO2_29 (_MX51_PAD_EIM_CS4__GPIO2_29 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL)) +#define MX51_PAD_EIM_CS4__USBOTG_CLK (_MX51_PAD_EIM_CS4__USBOTG_CLK | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_EIM_CS5__AUD5_TXFS (_MX51_PAD_EIM_CS5__AUD5_TXFS | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_EIM_CS5__CSI1_D7 (_MX51_PAD_EIM_CS5__CSI1_D7 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_EIM_CS5__DISP1_EXT_CLK (_MX51_PAD_EIM_CS5__DISP1_EXT_CLK | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_EIM_CS5__EIM_CS5 (_MX51_PAD_EIM_CS5__EIM_CS5 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_EIM_CS5__FEC_CRS (_MX51_PAD_EIM_CS5__FEC_CRS | MUX_PAD_CTRL(MX51_PAD_CTRL_2)) +#define MX51_PAD_EIM_CS5__GPIO2_30 (_MX51_PAD_EIM_CS5__GPIO2_30 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL)) +#define MX51_PAD_EIM_CS5__USBOTG_DIR (_MX51_PAD_EIM_CS5__USBOTG_DIR | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_EIM_DTACK__EIM_DTACK (_MX51_PAD_EIM_DTACK__EIM_DTACK | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_EIM_DTACK__GPIO2_31 (_MX51_PAD_EIM_DTACK__GPIO2_31 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL)) +#define MX51_PAD_EIM_LBA__EIM_LBA (_MX51_PAD_EIM_LBA__EIM_LBA | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_EIM_LBA__GPIO3_1 (_MX51_PAD_EIM_LBA__GPIO3_1 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL)) +#define MX51_PAD_EIM_CRE__EIM_CRE (_MX51_PAD_EIM_CRE__EIM_CRE | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_EIM_CRE__GPIO3_2 (_MX51_PAD_EIM_CRE__GPIO3_2 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL)) +#define MX51_PAD_DRAM_CS1__DRAM_CS1 (_MX51_PAD_DRAM_CS1__DRAM_CS1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_NANDF_WE_B__GPIO3_3 (_MX51_PAD_NANDF_WE_B__GPIO3_3 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL)) +#define MX51_PAD_NANDF_WE_B__NANDF_WE_B (_MX51_PAD_NANDF_WE_B__NANDF_WE_B | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_NANDF_WE_B__PATA_DIOW (_MX51_PAD_NANDF_WE_B__PATA_DIOW | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_NANDF_WE_B__SD3_DATA0 (_MX51_PAD_NANDF_WE_B__SD3_DATA0 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_NANDF_RE_B__GPIO3_4 (_MX51_PAD_NANDF_RE_B__GPIO3_4 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL)) +#define MX51_PAD_NANDF_RE_B__NANDF_RE_B (_MX51_PAD_NANDF_RE_B__NANDF_RE_B | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_NANDF_RE_B__PATA_DIOR (_MX51_PAD_NANDF_RE_B__PATA_DIOR | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_NANDF_RE_B__SD3_DATA1 (_MX51_PAD_NANDF_RE_B__SD3_DATA1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_NANDF_ALE__GPIO3_5 (_MX51_PAD_NANDF_ALE__GPIO3_5 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL)) +#define MX51_PAD_NANDF_ALE__NANDF_ALE (_MX51_PAD_NANDF_ALE__NANDF_ALE | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_NANDF_ALE__PATA_BUFFER_EN (_MX51_PAD_NANDF_ALE__PATA_BUFFER_EN | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_NANDF_CLE__GPIO3_6 (_MX51_PAD_NANDF_CLE__GPIO3_6 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL)) +#define MX51_PAD_NANDF_CLE__NANDF_CLE (_MX51_PAD_NANDF_CLE__NANDF_CLE | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_NANDF_CLE__PATA_RESET_B (_MX51_PAD_NANDF_CLE__PATA_RESET_B | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_NANDF_WP_B__GPIO3_7 (_MX51_PAD_NANDF_WP_B__GPIO3_7 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL)) +#define MX51_PAD_NANDF_WP_B__NANDF_WP_B (_MX51_PAD_NANDF_WP_B__NANDF_WP_B | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_NANDF_WP_B__PATA_DMACK (_MX51_PAD_NANDF_WP_B__PATA_DMACK | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_NANDF_WP_B__SD3_DATA2 (_MX51_PAD_NANDF_WP_B__SD3_DATA2 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_NANDF_RB0__ECSPI2_SS1 (_MX51_PAD_NANDF_RB0__ECSPI2_SS1 | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL)) +#define MX51_PAD_NANDF_RB0__GPIO3_8 (_MX51_PAD_NANDF_RB0__GPIO3_8 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL)) +#define MX51_PAD_NANDF_RB0__NANDF_RB0 (_MX51_PAD_NANDF_RB0__NANDF_RB0 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_NANDF_RB0__PATA_DMARQ (_MX51_PAD_NANDF_RB0__PATA_DMARQ | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_NANDF_RB0__SD3_DATA3 (_MX51_PAD_NANDF_RB0__SD3_DATA3 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_NANDF_RB1__CSPI_MOSI (_MX51_PAD_NANDF_RB1__CSPI_MOSI | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL)) +#define MX51_PAD_NANDF_RB1__ECSPI2_RDY (_MX51_PAD_NANDF_RB1__ECSPI2_RDY | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL)) +#define MX51_PAD_NANDF_RB1__GPIO3_9 (_MX51_PAD_NANDF_RB1__GPIO3_9 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL)) +#define MX51_PAD_NANDF_RB1__NANDF_RB1 (_MX51_PAD_NANDF_RB1__NANDF_RB1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_NANDF_RB1__PATA_IORDY (_MX51_PAD_NANDF_RB1__PATA_IORDY | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_NANDF_RB1__SD4_CMD (_MX51_PAD_NANDF_RB1__SD4_CMD | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_NANDF_RB2__DISP2_WAIT (_MX51_PAD_NANDF_RB2__DISP2_WAIT | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_NANDF_RB2__ECSPI2_SCLK (_MX51_PAD_NANDF_RB2__ECSPI2_SCLK | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL)) +#define MX51_PAD_NANDF_RB2__FEC_COL (_MX51_PAD_NANDF_RB2__FEC_COL | MUX_PAD_CTRL(MX51_PAD_CTRL_2)) +#define MX51_PAD_NANDF_RB2__GPIO3_10 (_MX51_PAD_NANDF_RB2__GPIO3_10 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL)) +#define MX51_PAD_NANDF_RB2__NANDF_RB2 (_MX51_PAD_NANDF_RB2__NANDF_RB2 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_NANDF_RB2__USBH3_H3_DP (_MX51_PAD_NANDF_RB2__USBH3_H3_DP | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_NANDF_RB2__USBH3_NXT (_MX51_PAD_NANDF_RB2__USBH3_NXT | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_NANDF_RB3__DISP1_WAIT (_MX51_PAD_NANDF_RB3__DISP1_WAIT | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_NANDF_RB3__ECSPI2_MISO (_MX51_PAD_NANDF_RB3__ECSPI2_MISO | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL)) +#define MX51_PAD_NANDF_RB3__FEC_RX_CLK (_MX51_PAD_NANDF_RB3__FEC_RX_CLK | MUX_PAD_CTRL(MX51_PAD_CTRL_2)) +#define MX51_PAD_NANDF_RB3__GPIO3_11 (_MX51_PAD_NANDF_RB3__GPIO3_11 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL)) +#define MX51_PAD_NANDF_RB3__NANDF_RB3 (_MX51_PAD_NANDF_RB3__NANDF_RB3 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_NANDF_RB3__USBH3_CLK (_MX51_PAD_NANDF_RB3__USBH3_CLK | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_NANDF_RB3__USBH3_H3_DM (_MX51_PAD_NANDF_RB3__USBH3_H3_DM | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_GPIO_NAND__GPIO_NAND (_MX51_PAD_GPIO_NAND__GPIO_NAND | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL)) +#define MX51_PAD_GPIO_NAND__PATA_INTRQ (_MX51_PAD_GPIO_NAND__PATA_INTRQ | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_NANDF_CS0__GPIO3_16 (_MX51_PAD_NANDF_CS0__GPIO3_16 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL)) +#define MX51_PAD_NANDF_CS0__NANDF_CS0 (_MX51_PAD_NANDF_CS0__NANDF_CS0 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_NANDF_CS1__GPIO3_17 (_MX51_PAD_NANDF_CS1__GPIO3_17 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL)) +#define MX51_PAD_NANDF_CS1__NANDF_CS1 (_MX51_PAD_NANDF_CS1__NANDF_CS1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_NANDF_CS2__CSPI_SCLK (_MX51_PAD_NANDF_CS2__CSPI_SCLK | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL)) +#define MX51_PAD_NANDF_CS2__FEC_TX_ER (_MX51_PAD_NANDF_CS2__FEC_TX_ER | MUX_PAD_CTRL(MX51_PAD_CTRL_5)) +#define MX51_PAD_NANDF_CS2__GPIO3_18 (_MX51_PAD_NANDF_CS2__GPIO3_18 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL)) +#define MX51_PAD_NANDF_CS2__NANDF_CS2 (_MX51_PAD_NANDF_CS2__NANDF_CS2 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_NANDF_CS2__PATA_CS_0 (_MX51_PAD_NANDF_CS2__PATA_CS_0 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_NANDF_CS2__SD4_CLK (_MX51_PAD_NANDF_CS2__SD4_CLK | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_NANDF_CS2__USBH3_H1_DP (_MX51_PAD_NANDF_CS2__USBH3_H1_DP | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_NANDF_CS3__FEC_MDC (_MX51_PAD_NANDF_CS3__FEC_MDC | MUX_PAD_CTRL(MX51_PAD_CTRL_5)) +#define MX51_PAD_NANDF_CS3__GPIO3_19 (_MX51_PAD_NANDF_CS3__GPIO3_19 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL)) +#define MX51_PAD_NANDF_CS3__NANDF_CS3 (_MX51_PAD_NANDF_CS3__NANDF_CS3 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_NANDF_CS3__PATA_CS_1 (_MX51_PAD_NANDF_CS3__PATA_CS_1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_NANDF_CS3__SD4_DAT0 (_MX51_PAD_NANDF_CS3__SD4_DAT0 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_NANDF_CS3__USBH3_H1_DM (_MX51_PAD_NANDF_CS3__USBH3_H1_DM | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_NANDF_CS4__FEC_TDATA1 (_MX51_PAD_NANDF_CS4__FEC_TDATA1 | MUX_PAD_CTRL(MX51_PAD_CTRL_5)) +#define MX51_PAD_NANDF_CS4__GPIO3_20 (_MX51_PAD_NANDF_CS4__GPIO3_20 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL)) +#define MX51_PAD_NANDF_CS4__NANDF_CS4 (_MX51_PAD_NANDF_CS4__NANDF_CS4 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_NANDF_CS4__PATA_DA_0 (_MX51_PAD_NANDF_CS4__PATA_DA_0 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_NANDF_CS4__SD4_DAT1 (_MX51_PAD_NANDF_CS4__SD4_DAT1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_NANDF_CS4__USBH3_STP (_MX51_PAD_NANDF_CS4__USBH3_STP | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_NANDF_CS5__FEC_TDATA2 (_MX51_PAD_NANDF_CS5__FEC_TDATA2 | MUX_PAD_CTRL(MX51_PAD_CTRL_5)) +#define MX51_PAD_NANDF_CS5__GPIO3_21 (_MX51_PAD_NANDF_CS5__GPIO3_21 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL)) +#define MX51_PAD_NANDF_CS5__NANDF_CS5 (_MX51_PAD_NANDF_CS5__NANDF_CS5 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_NANDF_CS5__PATA_DA_1 (_MX51_PAD_NANDF_CS5__PATA_DA_1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_NANDF_CS5__SD4_DAT2 (_MX51_PAD_NANDF_CS5__SD4_DAT2 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_NANDF_CS5__USBH3_DIR (_MX51_PAD_NANDF_CS5__USBH3_DIR | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_NANDF_CS6__CSPI_SS3 (_MX51_PAD_NANDF_CS6__CSPI_SS3 | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL)) +#define MX51_PAD_NANDF_CS6__FEC_TDATA3 (_MX51_PAD_NANDF_CS6__FEC_TDATA3 | MUX_PAD_CTRL(MX51_PAD_CTRL_5)) +#define MX51_PAD_NANDF_CS6__GPIO3_22 (_MX51_PAD_NANDF_CS6__GPIO3_22 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL)) +#define MX51_PAD_NANDF_CS6__NANDF_CS6 (_MX51_PAD_NANDF_CS6__NANDF_CS6 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_NANDF_CS6__PATA_DA_2 (_MX51_PAD_NANDF_CS6__PATA_DA_2 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_NANDF_CS6__SD4_DAT3 (_MX51_PAD_NANDF_CS6__SD4_DAT3 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_NANDF_CS7__FEC_TX_EN (_MX51_PAD_NANDF_CS7__FEC_TX_EN | MUX_PAD_CTRL(MX51_PAD_CTRL_5)) +#define MX51_PAD_NANDF_CS7__GPIO3_23 (_MX51_PAD_NANDF_CS7__GPIO3_23 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL)) +#define MX51_PAD_NANDF_CS7__NANDF_CS7 (_MX51_PAD_NANDF_CS7__NANDF_CS7 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_NANDF_CS7__SD3_CLK (_MX51_PAD_NANDF_CS7__SD3_CLK | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_NANDF_RDY_INT__ECSPI2_SS0 (_MX51_PAD_NANDF_RDY_INT__ECSPI2_SS0 | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL)) +#define MX51_PAD_NANDF_RDY_INT__FEC_TX_CLK (_MX51_PAD_NANDF_RDY_INT__FEC_TX_CLK | MUX_PAD_CTRL(MX51_PAD_CTRL_4)) +#define MX51_PAD_NANDF_RDY_INT__GPIO3_24 (_MX51_PAD_NANDF_RDY_INT__GPIO3_24 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL)) +#define MX51_PAD_NANDF_RDY_INT__NANDF_RDY_INT (_MX51_PAD_NANDF_RDY_INT__NANDF_RDY_INT | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_NANDF_RDY_INT__SD3_CMD (_MX51_PAD_NANDF_RDY_INT__SD3_CMD | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_NANDF_D15__ECSPI2_MOSI (_MX51_PAD_NANDF_D15__ECSPI2_MOSI | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL)) +#define MX51_PAD_NANDF_D15__GPIO3_25 (_MX51_PAD_NANDF_D15__GPIO3_25 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL)) +#define MX51_PAD_NANDF_D15__NANDF_D15 (_MX51_PAD_NANDF_D15__NANDF_D15 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_NANDF_D15__PATA_DATA15 (_MX51_PAD_NANDF_D15__PATA_DATA15 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_NANDF_D15__SD3_DAT7 (_MX51_PAD_NANDF_D15__SD3_DAT7 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_NANDF_D14__ECSPI2_SS3 (_MX51_PAD_NANDF_D14__ECSPI2_SS3 | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL)) +#define MX51_PAD_NANDF_D14__GPIO3_26 (_MX51_PAD_NANDF_D14__GPIO3_26 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL)) +#define MX51_PAD_NANDF_D14__NANDF_D14 (_MX51_PAD_NANDF_D14__NANDF_D14 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_NANDF_D14__PATA_DATA14 (_MX51_PAD_NANDF_D14__PATA_DATA14 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_NANDF_D14__SD3_DAT6 (_MX51_PAD_NANDF_D14__SD3_DAT6 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_NANDF_D13__ECSPI2_SS2 (_MX51_PAD_NANDF_D13__ECSPI2_SS2 | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL)) +#define MX51_PAD_NANDF_D13__GPIO3_27 (_MX51_PAD_NANDF_D13__GPIO3_27 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL)) +#define MX51_PAD_NANDF_D13__NANDF_D13 (_MX51_PAD_NANDF_D13__NANDF_D13 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_NANDF_D13__PATA_DATA13 (_MX51_PAD_NANDF_D13__PATA_DATA13 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_NANDF_D13__SD3_DAT5 (_MX51_PAD_NANDF_D13__SD3_DAT5 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_NANDF_D12__ECSPI2_SS1 (_MX51_PAD_NANDF_D12__ECSPI2_SS1 | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL)) +#define MX51_PAD_NANDF_D12__GPIO3_28 (_MX51_PAD_NANDF_D12__GPIO3_28 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL)) +#define MX51_PAD_NANDF_D12__NANDF_D12 (_MX51_PAD_NANDF_D12__NANDF_D12 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_NANDF_D12__PATA_DATA12 (_MX51_PAD_NANDF_D12__PATA_DATA12 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_NANDF_D12__SD3_DAT4 (_MX51_PAD_NANDF_D12__SD3_DAT4 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_NANDF_D11__FEC_RX_DV (_MX51_PAD_NANDF_D11__FEC_RX_DV | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_NANDF_D11__GPIO3_29 (_MX51_PAD_NANDF_D11__GPIO3_29 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL)) +#define MX51_PAD_NANDF_D11__NANDF_D11 (_MX51_PAD_NANDF_D11__NANDF_D11 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_NANDF_D11__PATA_DATA11 (_MX51_PAD_NANDF_D11__PATA_DATA11 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_NANDF_D11__SD3_DATA3 (_MX51_PAD_NANDF_D11__SD3_DATA3 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_NANDF_D10__GPIO3_30 (_MX51_PAD_NANDF_D10__GPIO3_30 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL)) +#define MX51_PAD_NANDF_D10__NANDF_D10 (_MX51_PAD_NANDF_D10__NANDF_D10 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_NANDF_D10__PATA_DATA10 (_MX51_PAD_NANDF_D10__PATA_DATA10 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_NANDF_D10__SD3_DATA2 (_MX51_PAD_NANDF_D10__SD3_DATA2 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_NANDF_D9__FEC_RDATA0 (_MX51_PAD_NANDF_D9__FEC_RDATA0 | MUX_PAD_CTRL(MX51_PAD_CTRL_4)) +#define MX51_PAD_NANDF_D9__GPIO3_31 (_MX51_PAD_NANDF_D9__GPIO3_31 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL)) +#define MX51_PAD_NANDF_D9__NANDF_D9 (_MX51_PAD_NANDF_D9__NANDF_D9 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_NANDF_D9__PATA_DATA9 (_MX51_PAD_NANDF_D9__PATA_DATA9 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_NANDF_D9__SD3_DATA1 (_MX51_PAD_NANDF_D9__SD3_DATA1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_NANDF_D8__FEC_TDATA0 (_MX51_PAD_NANDF_D8__FEC_TDATA0 | MUX_PAD_CTRL(MX51_PAD_CTRL_5)) +#define MX51_PAD_NANDF_D8__GPIO4_0 (_MX51_PAD_NANDF_D8__GPIO4_0 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL)) +#define MX51_PAD_NANDF_D8__NANDF_D8 (_MX51_PAD_NANDF_D8__NANDF_D8 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_NANDF_D8__PATA_DATA8 (_MX51_PAD_NANDF_D8__PATA_DATA8 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_NANDF_D8__SD3_DATA0 (_MX51_PAD_NANDF_D8__SD3_DATA0 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_NANDF_D7__GPIO4_1 (_MX51_PAD_NANDF_D7__GPIO4_1 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL)) +#define MX51_PAD_NANDF_D7__NANDF_D7 (_MX51_PAD_NANDF_D7__NANDF_D7 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_NANDF_D7__PATA_DATA7 (_MX51_PAD_NANDF_D7__PATA_DATA7 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_NANDF_D7__USBH3_DATA0 (_MX51_PAD_NANDF_D7__USBH3_DATA0 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_NANDF_D6__GPIO4_2 (_MX51_PAD_NANDF_D6__GPIO4_2 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL)) +#define MX51_PAD_NANDF_D6__NANDF_D6 (_MX51_PAD_NANDF_D6__NANDF_D6 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_NANDF_D6__PATA_DATA6 (_MX51_PAD_NANDF_D6__PATA_DATA6 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_NANDF_D6__SD4_LCTL (_MX51_PAD_NANDF_D6__SD4_LCTL | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_NANDF_D6__USBH3_DATA1 (_MX51_PAD_NANDF_D6__USBH3_DATA1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_NANDF_D5__GPIO4_3 (_MX51_PAD_NANDF_D5__GPIO4_3 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL)) +#define MX51_PAD_NANDF_D5__NANDF_D5 (_MX51_PAD_NANDF_D5__NANDF_D5 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_NANDF_D5__PATA_DATA5 (_MX51_PAD_NANDF_D5__PATA_DATA5 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_NANDF_D5__SD4_WP (_MX51_PAD_NANDF_D5__SD4_WP | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_NANDF_D5__USBH3_DATA2 (_MX51_PAD_NANDF_D5__USBH3_DATA2 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_NANDF_D4__GPIO4_4 (_MX51_PAD_NANDF_D4__GPIO4_4 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL)) +#define MX51_PAD_NANDF_D4__NANDF_D4 (_MX51_PAD_NANDF_D4__NANDF_D4 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_NANDF_D4__PATA_DATA4 (_MX51_PAD_NANDF_D4__PATA_DATA4 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_NANDF_D4__SD4_CD (_MX51_PAD_NANDF_D4__SD4_CD | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_NANDF_D4__USBH3_DATA3 (_MX51_PAD_NANDF_D4__USBH3_DATA3 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_NANDF_D3__GPIO4_5 (_MX51_PAD_NANDF_D3__GPIO4_5 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL)) +#define MX51_PAD_NANDF_D3__NANDF_D3 (_MX51_PAD_NANDF_D3__NANDF_D3 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_NANDF_D3__PATA_DATA3 (_MX51_PAD_NANDF_D3__PATA_DATA3 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_NANDF_D3__SD4_DAT4 (_MX51_PAD_NANDF_D3__SD4_DAT4 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_NANDF_D3__USBH3_DATA4 (_MX51_PAD_NANDF_D3__USBH3_DATA4 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_NANDF_D2__GPIO4_6 (_MX51_PAD_NANDF_D2__GPIO4_6 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL)) +#define MX51_PAD_NANDF_D2__NANDF_D2 (_MX51_PAD_NANDF_D2__NANDF_D2 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_NANDF_D2__PATA_DATA2 (_MX51_PAD_NANDF_D2__PATA_DATA2 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_NANDF_D2__SD4_DAT5 (_MX51_PAD_NANDF_D2__SD4_DAT5 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_NANDF_D2__USBH3_DATA5 (_MX51_PAD_NANDF_D2__USBH3_DATA5 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_NANDF_D1__GPIO4_7 (_MX51_PAD_NANDF_D1__GPIO4_7 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL)) +#define MX51_PAD_NANDF_D1__NANDF_D1 (_MX51_PAD_NANDF_D1__NANDF_D1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_NANDF_D1__PATA_DATA1 (_MX51_PAD_NANDF_D1__PATA_DATA1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_NANDF_D1__SD4_DAT6 (_MX51_PAD_NANDF_D1__SD4_DAT6 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_NANDF_D1__USBH3_DATA6 (_MX51_PAD_NANDF_D1__USBH3_DATA6 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_NANDF_D0__GPIO4_8 (_MX51_PAD_NANDF_D0__GPIO4_8 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL)) +#define MX51_PAD_NANDF_D0__NANDF_D0 (_MX51_PAD_NANDF_D0__NANDF_D0 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_NANDF_D0__PATA_DATA0 (_MX51_PAD_NANDF_D0__PATA_DATA0 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_NANDF_D0__SD4_DAT7 (_MX51_PAD_NANDF_D0__SD4_DAT7 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_NANDF_D0__USBH3_DATA7 (_MX51_PAD_NANDF_D0__USBH3_DATA7 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_CSI1_D8__CSI1_D8 (_MX51_PAD_CSI1_D8__CSI1_D8 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_CSI1_D8__GPIO3_12 (_MX51_PAD_CSI1_D8__GPIO3_12 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL)) +#define MX51_PAD_CSI1_D9__CSI1_D9 (_MX51_PAD_CSI1_D9__CSI1_D9 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_CSI1_D9__GPIO3_13 (_MX51_PAD_CSI1_D9__GPIO3_13 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL)) +#define MX51_PAD_CSI1_D10__CSI1_D10 (_MX51_PAD_CSI1_D10__CSI1_D10 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_CSI1_D11__CSI1_D11 (_MX51_PAD_CSI1_D11__CSI1_D11 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_CSI1_D12__CSI1_D12 (_MX51_PAD_CSI1_D12__CSI1_D12 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_CSI1_D13__CSI1_D13 (_MX51_PAD_CSI1_D13__CSI1_D13 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_CSI1_D14__CSI1_D14 (_MX51_PAD_CSI1_D14__CSI1_D14 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_CSI1_D15__CSI1_D15 (_MX51_PAD_CSI1_D15__CSI1_D15 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_CSI1_D16__CSI1_D16 (_MX51_PAD_CSI1_D16__CSI1_D16 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_CSI1_D17__CSI1_D17 (_MX51_PAD_CSI1_D17__CSI1_D17 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_CSI1_D18__CSI1_D18 (_MX51_PAD_CSI1_D18__CSI1_D18 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_CSI1_D19__CSI1_D19 (_MX51_PAD_CSI1_D19__CSI1_D19 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_CSI1_VSYNC__CSI1_VSYNC (_MX51_PAD_CSI1_VSYNC__CSI1_VSYNC | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_CSI1_VSYNC__GPIO3_14 (_MX51_PAD_CSI1_VSYNC__GPIO3_14 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL)) +#define MX51_PAD_CSI1_HSYNC__CSI1_HSYNC (_MX51_PAD_CSI1_HSYNC__CSI1_HSYNC | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_CSI1_HSYNC__GPIO3_15 (_MX51_PAD_CSI1_HSYNC__GPIO3_15 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL)) +#define MX51_PAD_CSI1_PIXCLK__CSI1_PIXCLK (_MX51_PAD_CSI1_PIXCLK__CSI1_PIXCLK | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_CSI1_MCLK__CSI1_MCLK (_MX51_PAD_CSI1_MCLK__CSI1_MCLK | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_CSI2_D12__CSI2_D12 (_MX51_PAD_CSI2_D12__CSI2_D12 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_CSI2_D12__GPIO4_9 (_MX51_PAD_CSI2_D12__GPIO4_9 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL)) +#define MX51_PAD_CSI2_D13__CSI2_D13 (_MX51_PAD_CSI2_D13__CSI2_D13 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_CSI2_D13__GPIO4_10 (_MX51_PAD_CSI2_D13__GPIO4_10 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL)) +#define MX51_PAD_CSI2_D14__CSI2_D14 (_MX51_PAD_CSI2_D14__CSI2_D14 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_CSI2_D15__CSI2_D15 (_MX51_PAD_CSI2_D15__CSI2_D15 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_CSI2_D16__CSI2_D16 (_MX51_PAD_CSI2_D16__CSI2_D16 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_CSI2_D17__CSI2_D17 (_MX51_PAD_CSI2_D17__CSI2_D17 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_CSI2_D18__CSI2_D18 (_MX51_PAD_CSI2_D18__CSI2_D18 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_CSI2_D18__GPIO4_11 (_MX51_PAD_CSI2_D18__GPIO4_11 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL)) +#define MX51_PAD_CSI2_D19__CSI2_D19 (_MX51_PAD_CSI2_D19__CSI2_D19 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_CSI2_D19__GPIO4_12 (_MX51_PAD_CSI2_D19__GPIO4_12 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL)) +#define MX51_PAD_CSI2_VSYNC__CSI2_VSYNC (_MX51_PAD_CSI2_VSYNC__CSI2_VSYNC | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_CSI2_VSYNC__GPIO4_13 (_MX51_PAD_CSI2_VSYNC__GPIO4_13 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL)) +#define MX51_PAD_CSI2_HSYNC__CSI2_HSYNC (_MX51_PAD_CSI2_HSYNC__CSI2_HSYNC | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_CSI2_HSYNC__GPIO4_14 (_MX51_PAD_CSI2_HSYNC__GPIO4_14 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL)) +#define MX51_PAD_CSI2_PIXCLK__CSI2_PIXCLK (_MX51_PAD_CSI2_PIXCLK__CSI2_PIXCLK | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_CSI2_PIXCLK__GPIO4_15 (_MX51_PAD_CSI2_PIXCLK__GPIO4_15 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL)) +#define MX51_PAD_I2C1_CLK__GPIO4_16 (_MX51_PAD_I2C1_CLK__GPIO4_16 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL)) +#define MX51_PAD_I2C1_CLK__I2C1_CLK (_MX51_PAD_I2C1_CLK__I2C1_CLK | MUX_PAD_CTRL(MX51_I2C_PAD_CTRL)) +#define MX51_PAD_I2C1_DAT__GPIO4_17 (_MX51_PAD_I2C1_DAT__GPIO4_17 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL)) +#define MX51_PAD_I2C1_DAT__I2C1_DAT (_MX51_PAD_I2C1_DAT__I2C1_DAT | MUX_PAD_CTRL(MX51_I2C_PAD_CTRL)) +#define MX51_PAD_AUD3_BB_TXD__AUD3_TXD (_MX51_PAD_AUD3_BB_TXD__AUD3_TXD | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_AUD3_BB_TXD__GPIO4_18 (_MX51_PAD_AUD3_BB_TXD__GPIO4_18 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL)) +#define MX51_PAD_AUD3_BB_RXD__AUD3_RXD (_MX51_PAD_AUD3_BB_RXD__AUD3_RXD | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_AUD3_BB_RXD__GPIO4_19 (_MX51_PAD_AUD3_BB_RXD__GPIO4_19 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL)) +#define MX51_PAD_AUD3_BB_RXD__UART3_RXD (_MX51_PAD_AUD3_BB_RXD__UART3_RXD | MUX_PAD_CTRL(MX51_UART_PAD_CTRL)) +#define MX51_PAD_AUD3_BB_CK__AUD3_TXC (_MX51_PAD_AUD3_BB_CK__AUD3_TXC | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_AUD3_BB_CK__GPIO4_20 (_MX51_PAD_AUD3_BB_CK__GPIO4_20 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL)) +#define MX51_PAD_AUD3_BB_FS__AUD3_TXFS (_MX51_PAD_AUD3_BB_FS__AUD3_TXFS | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_AUD3_BB_FS__GPIO4_21 (_MX51_PAD_AUD3_BB_FS__GPIO4_21 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL)) +#define MX51_PAD_AUD3_BB_FS__UART3_TXD (_MX51_PAD_AUD3_BB_FS__UART3_TXD | MUX_PAD_CTRL(MX51_UART_PAD_CTRL)) +#define MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI (_MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL)) +#define MX51_PAD_CSPI1_MOSI__GPIO4_22 (_MX51_PAD_CSPI1_MOSI__GPIO4_22 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL)) +#define MX51_PAD_CSPI1_MOSI__I2C1_SDA (_MX51_PAD_CSPI1_MOSI__I2C1_SDA | MUX_PAD_CTRL(MX51_I2C_PAD_CTRL)) +#define MX51_PAD_CSPI1_MISO__AUD4_RXD (_MX51_PAD_CSPI1_MISO__AUD4_RXD | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_CSPI1_MISO__ECSPI1_MISO (_MX51_PAD_CSPI1_MISO__ECSPI1_MISO | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL)) +#define MX51_PAD_CSPI1_MISO__GPIO4_23 (_MX51_PAD_CSPI1_MISO__GPIO4_23 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL)) +#define MX51_PAD_CSPI1_SS0__AUD4_TXC (_MX51_PAD_CSPI1_SS0__AUD4_TXC | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_CSPI1_SS0__ECSPI1_SS0 (_MX51_PAD_CSPI1_SS0__ECSPI1_SS0 | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL)) +#define MX51_PAD_CSPI1_SS0__GPIO4_24 (_MX51_PAD_CSPI1_SS0__GPIO4_24 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL)) +#define MX51_PAD_CSPI1_SS1__AUD4_TXD (_MX51_PAD_CSPI1_SS1__AUD4_TXD | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_CSPI1_SS1__ECSPI1_SS1 (_MX51_PAD_CSPI1_SS1__ECSPI1_SS1 | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL)) +#define MX51_PAD_CSPI1_SS1__GPIO4_25 (_MX51_PAD_CSPI1_SS1__GPIO4_25 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL)) +#define MX51_PAD_CSPI1_RDY__AUD4_TXFS (_MX51_PAD_CSPI1_RDY__AUD4_TXFS | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_CSPI1_RDY__ECSPI1_RDY (_MX51_PAD_CSPI1_RDY__ECSPI1_RDY | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL)) +#define MX51_PAD_CSPI1_RDY__GPIO4_26 (_MX51_PAD_CSPI1_RDY__GPIO4_26 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL)) +#define MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK (_MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL)) +#define MX51_PAD_CSPI1_SCLK__GPIO4_27 (_MX51_PAD_CSPI1_SCLK__GPIO4_27 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL)) +#define MX51_PAD_CSPI1_SCLK__I2C1_SCL (_MX51_PAD_CSPI1_SCLK__I2C1_SCL | MUX_PAD_CTRL(MX51_I2C_PAD_CTRL)) +#define MX51_PAD_UART1_RXD__GPIO4_28 (_MX51_PAD_UART1_RXD__GPIO4_28 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL)) +#define MX51_PAD_UART1_RXD__UART1_RXD (_MX51_PAD_UART1_RXD__UART1_RXD | MUX_PAD_CTRL(MX51_UART_PAD_CTRL)) +#define MX51_PAD_UART1_TXD__GPIO4_29 (_MX51_PAD_UART1_TXD__GPIO4_29 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL)) +#define MX51_PAD_UART1_TXD__PWM2_PWMO (_MX51_PAD_UART1_TXD__PWM2_PWMO | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_UART1_TXD__UART1_TXD (_MX51_PAD_UART1_TXD__UART1_TXD | MUX_PAD_CTRL(MX51_UART_PAD_CTRL)) +#define MX51_PAD_UART1_RTS__GPIO4_30 (_MX51_PAD_UART1_RTS__GPIO4_30 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL)) +#define MX51_PAD_UART1_RTS__UART1_RTS (_MX51_PAD_UART1_RTS__UART1_RTS | MUX_PAD_CTRL(MX51_UART_PAD_CTRL)) +#define MX51_PAD_UART1_CTS__GPIO4_31 (_MX51_PAD_UART1_CTS__GPIO4_31 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL)) +#define MX51_PAD_UART1_CTS__UART1_CTS (_MX51_PAD_UART1_CTS__UART1_CTS | MUX_PAD_CTRL(MX51_UART_PAD_CTRL)) +#define MX51_PAD_UART2_RXD__FIRI_TXD (_MX51_PAD_UART2_RXD__FIRI_TXD | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_UART2_RXD__GPIO1_20 (_MX51_PAD_UART2_RXD__GPIO1_20 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL)) +#define MX51_PAD_UART2_RXD__UART2_RXD (_MX51_PAD_UART2_RXD__UART2_RXD | MUX_PAD_CTRL(MX51_UART_PAD_CTRL)) +#define MX51_PAD_UART2_TXD__FIRI_RXD (_MX51_PAD_UART2_TXD__FIRI_RXD | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_UART2_TXD__GPIO1_21 (_MX51_PAD_UART2_TXD__GPIO1_21 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL)) +#define MX51_PAD_UART2_TXD__UART2_TXD (_MX51_PAD_UART2_TXD__UART2_TXD | MUX_PAD_CTRL(MX51_UART_PAD_CTRL)) +#define MX51_PAD_UART3_RXD__CSI1_D0 (_MX51_PAD_UART3_RXD__CSI1_D0 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_UART3_RXD__GPIO1_22 (_MX51_PAD_UART3_RXD__GPIO1_22 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL)) +#define MX51_PAD_UART3_RXD__UART1_DTR (_MX51_PAD_UART3_RXD__UART1_DTR | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_UART3_RXD__UART3_RXD (_MX51_PAD_UART3_RXD__UART3_RXD | MUX_PAD_CTRL(MX51_UART_PAD_CTRL)) +#define MX51_PAD_UART3_TXD__CSI1_D1 (_MX51_PAD_UART3_TXD__CSI1_D1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_UART3_TXD__GPIO1_23 (_MX51_PAD_UART3_TXD__GPIO1_23 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL)) +#define MX51_PAD_UART3_TXD__UART1_DSR (_MX51_PAD_UART3_TXD__UART1_DSR | MUX_PAD_CTRL(MX51_UART_PAD_CTRL)) +#define MX51_PAD_UART3_TXD__UART3_TXD (_MX51_PAD_UART3_TXD__UART3_TXD | MUX_PAD_CTRL(MX51_UART_PAD_CTRL)) +#define MX51_PAD_OWIRE_LINE__GPIO1_24 (_MX51_PAD_OWIRE_LINE__GPIO1_24 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL)) +#define MX51_PAD_OWIRE_LINE__OWIRE_LINE (_MX51_PAD_OWIRE_LINE__OWIRE_LINE | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_OWIRE_LINE__SPDIF_OUT (_MX51_PAD_OWIRE_LINE__SPDIF_OUT | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_KEY_ROW0__KEY_ROW0 (_MX51_PAD_KEY_ROW0__KEY_ROW0 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_KEY_ROW1__KEY_ROW1 (_MX51_PAD_KEY_ROW1__KEY_ROW1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_KEY_ROW2__KEY_ROW2 (_MX51_PAD_KEY_ROW2__KEY_ROW2 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_KEY_ROW3__KEY_ROW3 (_MX51_PAD_KEY_ROW3__KEY_ROW3 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_KEY_COL0__KEY_COL0 (_MX51_PAD_KEY_COL0__KEY_COL0 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_KEY_COL0__PLL1_BYP (_MX51_PAD_KEY_COL0__PLL1_BYP | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_KEY_COL1__KEY_COL1 (_MX51_PAD_KEY_COL1__KEY_COL1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_KEY_COL1__PLL2_BYP (_MX51_PAD_KEY_COL1__PLL2_BYP | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_KEY_COL2__KEY_COL2 (_MX51_PAD_KEY_COL2__KEY_COL2 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_KEY_COL2__PLL3_BYP (_MX51_PAD_KEY_COL2__PLL3_BYP | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_KEY_COL3__KEY_COL3 (_MX51_PAD_KEY_COL3__KEY_COL3 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_KEY_COL4__I2C2_SCL (_MX51_PAD_KEY_COL4__I2C2_SCL | MUX_PAD_CTRL(MX51_I2C_PAD_CTRL)) +#define MX51_PAD_KEY_COL4__KEY_COL4 (_MX51_PAD_KEY_COL4__KEY_COL4 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_KEY_COL4__SPDIF_OUT1 (_MX51_PAD_KEY_COL4__SPDIF_OUT1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_KEY_COL4__UART1_RI (_MX51_PAD_KEY_COL4__UART1_RI | MUX_PAD_CTRL(MX51_UART_PAD_CTRL)) +#define MX51_PAD_KEY_COL4__UART3_RTS (_MX51_PAD_KEY_COL4__UART3_RTS | MUX_PAD_CTRL(MX51_UART_PAD_CTRL)) +#define MX51_PAD_KEY_COL5__I2C2_SDA (_MX51_PAD_KEY_COL5__I2C2_SDA | MUX_PAD_CTRL(MX51_I2C_PAD_CTRL)) +#define MX51_PAD_KEY_COL5__KEY_COL5 (_MX51_PAD_KEY_COL5__KEY_COL5 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_KEY_COL5__UART1_DCD (_MX51_PAD_KEY_COL5__UART1_DCD | MUX_PAD_CTRL(MX51_UART_PAD_CTRL)) +#define MX51_PAD_KEY_COL5__UART3_CTS (_MX51_PAD_KEY_COL5__UART3_CTS | MUX_PAD_CTRL(MX51_UART_PAD_CTRL)) +#define MX51_PAD_USBH1_CLK__CSPI_SCLK (_MX51_PAD_USBH1_CLK__CSPI_SCLK | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL)) +#define MX51_PAD_USBH1_CLK__GPIO1_25 (_MX51_PAD_USBH1_CLK__GPIO1_25 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL)) +#define MX51_PAD_USBH1_CLK__I2C2_SCL (_MX51_PAD_USBH1_CLK__I2C2_SCL | MUX_PAD_CTRL(MX51_I2C_PAD_CTRL)) +#define MX51_PAD_USBH1_CLK__USBH1_CLK (_MX51_PAD_USBH1_CLK__USBH1_CLK | MUX_PAD_CTRL(MX51_USBH1_PAD_CTRL)) +#define MX51_PAD_USBH1_DIR__CSPI_MOSI (_MX51_PAD_USBH1_DIR__CSPI_MOSI | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL)) +#define MX51_PAD_USBH1_DIR__GPIO1_26 (_MX51_PAD_USBH1_DIR__GPIO1_26 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL)) +#define MX51_PAD_USBH1_DIR__I2C2_SDA (_MX51_PAD_USBH1_DIR__I2C2_SDA | MUX_PAD_CTRL(MX51_I2C_PAD_CTRL)) +#define MX51_PAD_USBH1_DIR__USBH1_DIR (_MX51_PAD_USBH1_DIR__USBH1_DIR | MUX_PAD_CTRL(MX51_USBH1_PAD_CTRL)) +#define MX51_PAD_USBH1_STP__CSPI_RDY (_MX51_PAD_USBH1_STP__CSPI_RDY | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL)) +#define MX51_PAD_USBH1_STP__GPIO1_27 (_MX51_PAD_USBH1_STP__GPIO1_27 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL)) +#define MX51_PAD_USBH1_STP__UART3_RXD (_MX51_PAD_USBH1_STP__UART3_RXD | MUX_PAD_CTRL(MX51_UART_PAD_CTRL)) +#define MX51_PAD_USBH1_STP__USBH1_STP (_MX51_PAD_USBH1_STP__USBH1_STP | MUX_PAD_CTRL(MX51_USBH1_PAD_CTRL)) +#define MX51_PAD_USBH1_NXT__CSPI_MISO (_MX51_PAD_USBH1_NXT__CSPI_MISO | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL)) +#define MX51_PAD_USBH1_NXT__GPIO1_28 (_MX51_PAD_USBH1_NXT__GPIO1_28 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL)) +#define MX51_PAD_USBH1_NXT__UART3_TXD (_MX51_PAD_USBH1_NXT__UART3_TXD | MUX_PAD_CTRL(MX51_UART_PAD_CTRL)) +#define MX51_PAD_USBH1_NXT__USBH1_NXT (_MX51_PAD_USBH1_NXT__USBH1_NXT | MUX_PAD_CTRL(MX51_USBH1_PAD_CTRL)) +#define MX51_PAD_USBH1_DATA0__GPIO1_11 (_MX51_PAD_USBH1_DATA0__GPIO1_11 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL)) +#define MX51_PAD_USBH1_DATA0__UART2_CTS (_MX51_PAD_USBH1_DATA0__UART2_CTS | MUX_PAD_CTRL(MX51_UART_PAD_CTRL)) +#define MX51_PAD_USBH1_DATA0__USBH1_DATA0 (_MX51_PAD_USBH1_DATA0__USBH1_DATA0 | MUX_PAD_CTRL(MX51_USBH1_PAD_CTRL)) +#define MX51_PAD_USBH1_DATA1__GPIO1_12 (_MX51_PAD_USBH1_DATA1__GPIO1_12 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL)) +#define MX51_PAD_USBH1_DATA1__UART2_RXD (_MX51_PAD_USBH1_DATA1__UART2_RXD | MUX_PAD_CTRL(MX51_UART_PAD_CTRL)) +#define MX51_PAD_USBH1_DATA1__USBH1_DATA1 (_MX51_PAD_USBH1_DATA1__USBH1_DATA1 | MUX_PAD_CTRL(MX51_USBH1_PAD_CTRL)) +#define MX51_PAD_USBH1_DATA2__GPIO1_13 (_MX51_PAD_USBH1_DATA2__GPIO1_13 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL)) +#define MX51_PAD_USBH1_DATA2__UART2_TXD (_MX51_PAD_USBH1_DATA2__UART2_TXD | MUX_PAD_CTRL(MX51_UART_PAD_CTRL)) +#define MX51_PAD_USBH1_DATA2__USBH1_DATA2 (_MX51_PAD_USBH1_DATA2__USBH1_DATA2 | MUX_PAD_CTRL(MX51_USBH1_PAD_CTRL)) +#define MX51_PAD_USBH1_DATA3__GPIO1_14 (_MX51_PAD_USBH1_DATA3__GPIO1_14 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL)) +#define MX51_PAD_USBH1_DATA3__UART2_RTS (_MX51_PAD_USBH1_DATA3__UART2_RTS | MUX_PAD_CTRL(MX51_UART_PAD_CTRL)) +#define MX51_PAD_USBH1_DATA3__USBH1_DATA3 (_MX51_PAD_USBH1_DATA3__USBH1_DATA3 | MUX_PAD_CTRL(MX51_USBH1_PAD_CTRL)) +#define MX51_PAD_USBH1_DATA4__CSPI_SS0 (_MX51_PAD_USBH1_DATA4__CSPI_SS0 | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL)) +#define MX51_PAD_USBH1_DATA4__GPIO1_15 (_MX51_PAD_USBH1_DATA4__GPIO1_15 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL)) +#define MX51_PAD_USBH1_DATA4__USBH1_DATA4 (_MX51_PAD_USBH1_DATA4__USBH1_DATA4 | MUX_PAD_CTRL(MX51_USBH1_PAD_CTRL)) +#define MX51_PAD_USBH1_DATA5__CSPI_SS1 (_MX51_PAD_USBH1_DATA5__CSPI_SS1 | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL)) +#define MX51_PAD_USBH1_DATA5__GPIO1_16 (_MX51_PAD_USBH1_DATA5__GPIO1_16 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL)) +#define MX51_PAD_USBH1_DATA5__USBH1_DATA5 (_MX51_PAD_USBH1_DATA5__USBH1_DATA5 | MUX_PAD_CTRL(MX51_USBH1_PAD_CTRL)) +#define MX51_PAD_USBH1_DATA6__CSPI_SS3 (_MX51_PAD_USBH1_DATA6__CSPI_SS3 | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL)) +#define MX51_PAD_USBH1_DATA6__GPIO1_17 (_MX51_PAD_USBH1_DATA6__GPIO1_17 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL)) +#define MX51_PAD_USBH1_DATA6__USBH1_DATA6 (_MX51_PAD_USBH1_DATA6__USBH1_DATA6 | MUX_PAD_CTRL(MX51_USBH1_PAD_CTRL)) +#define MX51_PAD_USBH1_DATA7__ECSPI1_SS3 (_MX51_PAD_USBH1_DATA7__ECSPI1_SS3 | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL)) +#define MX51_PAD_USBH1_DATA7__ECSPI2_SS3 (_MX51_PAD_USBH1_DATA7__ECSPI2_SS3 | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL)) +#define MX51_PAD_USBH1_DATA7__GPIO1_18 (_MX51_PAD_USBH1_DATA7__GPIO1_18 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL)) +#define MX51_PAD_USBH1_DATA7__USBH1_DATA7 (_MX51_PAD_USBH1_DATA7__USBH1_DATA7 | MUX_PAD_CTRL(MX51_USBH1_PAD_CTRL)) +#define MX51_PAD_DI1_PIN11__DI1_PIN11 (_MX51_PAD_DI1_PIN11__DI1_PIN11 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_DI1_PIN11__ECSPI1_SS2 (_MX51_PAD_DI1_PIN11__ECSPI1_SS2 | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL)) +#define MX51_PAD_DI1_PIN11__GPIO3_0 (_MX51_PAD_DI1_PIN11__GPIO3_0 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL)) +#define MX51_PAD_DI1_PIN12__DI1_PIN12 (_MX51_PAD_DI1_PIN12__DI1_PIN12 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_DI1_PIN12__GPIO3_1 (_MX51_PAD_DI1_PIN12__GPIO3_1 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL)) +#define MX51_PAD_DI1_PIN13__DI1_PIN13 (_MX51_PAD_DI1_PIN13__DI1_PIN13 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_DI1_PIN13__GPIO3_2 (_MX51_PAD_DI1_PIN13__GPIO3_2 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL)) +#define MX51_PAD_DI1_D0_CS__DI1_D0_CS (_MX51_PAD_DI1_D0_CS__DI1_D0_CS | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_DI1_D0_CS__GPIO3_3 (_MX51_PAD_DI1_D0_CS__GPIO3_3 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL)) +#define MX51_PAD_DI1_D1_CS__DI1_D1_CS (_MX51_PAD_DI1_D1_CS__DI1_D1_CS | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_DI1_D1_CS__DISP1_PIN14 (_MX51_PAD_DI1_D1_CS__DISP1_PIN14 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_DI1_D1_CS__DISP1_PIN5 (_MX51_PAD_DI1_D1_CS__DISP1_PIN5 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_DI1_D1_CS__GPIO3_4 (_MX51_PAD_DI1_D1_CS__GPIO3_4 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL)) +#define MX51_PAD_DISPB2_SER_DIN__DISP1_PIN1 (_MX51_PAD_DISPB2_SER_DIN__DISP1_PIN1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_DISPB2_SER_DIN__DISPB2_SER_DIN (_MX51_PAD_DISPB2_SER_DIN__DISPB2_SER_DIN | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_DISPB2_SER_DIN__GPIO3_5 (_MX51_PAD_DISPB2_SER_DIN__GPIO3_5 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL)) +#define MX51_PAD_DISPB2_SER_DIO__DISP1_PIN6 (_MX51_PAD_DISPB2_SER_DIO__DISP1_PIN6 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_DISPB2_SER_DIO__DISPB2_SER_DIO (_MX51_PAD_DISPB2_SER_DIO__DISPB2_SER_DIO | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_DISPB2_SER_DIO__GPIO3_6 (_MX51_PAD_DISPB2_SER_DIO__GPIO3_6 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL)) +#define MX51_PAD_DISPB2_SER_CLK__DISP1_PIN17 (_MX51_PAD_DISPB2_SER_CLK__DISP1_PIN17 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_DISPB2_SER_CLK__DISP1_PIN7 (_MX51_PAD_DISPB2_SER_CLK__DISP1_PIN7 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_DISPB2_SER_CLK__DISPB2_SER_CLK (_MX51_PAD_DISPB2_SER_CLK__DISPB2_SER_CLK | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_DISPB2_SER_CLK__GPIO3_7 (_MX51_PAD_DISPB2_SER_CLK__GPIO3_7 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL)) +#define MX51_PAD_DISPB2_SER_RS__DISP1_EXT_CLK (_MX51_PAD_DISPB2_SER_RS__DISP1_EXT_CLK | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_DISPB2_SER_RS__DISP1_PIN16 (_MX51_PAD_DISPB2_SER_RS__DISP1_PIN16 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_DISPB2_SER_RS__DISP1_PIN8 (_MX51_PAD_DISPB2_SER_RS__DISP1_PIN8 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_DISPB2_SER_RS__DISPB2_SER_RS (_MX51_PAD_DISPB2_SER_RS__DISPB2_SER_RS | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_DISPB2_SER_RS__DISPB2_SER_RS (_MX51_PAD_DISPB2_SER_RS__DISPB2_SER_RS | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_DISPB2_SER_RS__GPIO3_8 (_MX51_PAD_DISPB2_SER_RS__GPIO3_8 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL)) +#define MX51_PAD_DISP1_DAT0__DISP1_DAT0 (_MX51_PAD_DISP1_DAT0__DISP1_DAT0 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_DISP1_DAT1__DISP1_DAT1 (_MX51_PAD_DISP1_DAT1__DISP1_DAT1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_DISP1_DAT2__DISP1_DAT2 (_MX51_PAD_DISP1_DAT2__DISP1_DAT2 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_DISP1_DAT3__DISP1_DAT3 (_MX51_PAD_DISP1_DAT3__DISP1_DAT3 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_DISP1_DAT4__DISP1_DAT4 (_MX51_PAD_DISP1_DAT4__DISP1_DAT4 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_DISP1_DAT5__DISP1_DAT5 (_MX51_PAD_DISP1_DAT5__DISP1_DAT5 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_DISP1_DAT6__BOOT_USB_SRC (_MX51_PAD_DISP1_DAT6__BOOT_USB_SRC | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_DISP1_DAT6__DISP1_DAT6 (_MX51_PAD_DISP1_DAT6__DISP1_DAT6 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_DISP1_DAT7__BOOT_EEPROM_CFG (_MX51_PAD_DISP1_DAT7__BOOT_EEPROM_CFG | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_DISP1_DAT7__DISP1_DAT7 (_MX51_PAD_DISP1_DAT7__DISP1_DAT7 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_DISP1_DAT8__BOOT_SRC0 (_MX51_PAD_DISP1_DAT8__BOOT_SRC0 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_DISP1_DAT8__DISP1_DAT8 (_MX51_PAD_DISP1_DAT8__DISP1_DAT8 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_DISP1_DAT9__BOOT_SRC1 (_MX51_PAD_DISP1_DAT9__BOOT_SRC1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_DISP1_DAT9__DISP1_DAT9 (_MX51_PAD_DISP1_DAT9__DISP1_DAT9 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_DISP1_DAT10__BOOT_SPARE_SIZE (_MX51_PAD_DISP1_DAT10__BOOT_SPARE_SIZE | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_DISP1_DAT10__DISP1_DAT10 (_MX51_PAD_DISP1_DAT10__DISP1_DAT10 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_DISP1_DAT11__BOOT_LPB_FREQ2 (_MX51_PAD_DISP1_DAT11__BOOT_LPB_FREQ2 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_DISP1_DAT11__DISP1_DAT11 (_MX51_PAD_DISP1_DAT11__DISP1_DAT11 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_DISP1_DAT12__BOOT_MLC_SEL (_MX51_PAD_DISP1_DAT12__BOOT_MLC_SEL | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_DISP1_DAT12__DISP1_DAT12 (_MX51_PAD_DISP1_DAT12__DISP1_DAT12 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_DISP1_DAT13__BOOT_MEM_CTL0 (_MX51_PAD_DISP1_DAT13__BOOT_MEM_CTL0 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_DISP1_DAT13__DISP1_DAT13 (_MX51_PAD_DISP1_DAT13__DISP1_DAT13 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_DISP1_DAT14__BOOT_MEM_CTL1 (_MX51_PAD_DISP1_DAT14__BOOT_MEM_CTL1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_DISP1_DAT14__DISP1_DAT14 (_MX51_PAD_DISP1_DAT14__DISP1_DAT14 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_DISP1_DAT15__BOOT_BUS_WIDTH (_MX51_PAD_DISP1_DAT15__BOOT_BUS_WIDTH | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_DISP1_DAT15__DISP1_DAT15 (_MX51_PAD_DISP1_DAT15__DISP1_DAT15 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_DISP1_DAT16__BOOT_PAGE_SIZE0 (_MX51_PAD_DISP1_DAT16__BOOT_PAGE_SIZE0 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_DISP1_DAT16__DISP1_DAT16 (_MX51_PAD_DISP1_DAT16__DISP1_DAT16 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_DISP1_DAT17__BOOT_PAGE_SIZE1 (_MX51_PAD_DISP1_DAT17__BOOT_PAGE_SIZE1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_DISP1_DAT17__DISP1_DAT17 (_MX51_PAD_DISP1_DAT17__DISP1_DAT17 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_DISP1_DAT18__BOOT_WEIM_MUXED0 (_MX51_PAD_DISP1_DAT18__BOOT_WEIM_MUXED0 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_DISP1_DAT18__DISP1_DAT18 (_MX51_PAD_DISP1_DAT18__DISP1_DAT18 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_DISP1_DAT18__DISP2_PIN11 (_MX51_PAD_DISP1_DAT18__DISP2_PIN11 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_DISP1_DAT18__DISP2_PIN5 (_MX51_PAD_DISP1_DAT18__DISP2_PIN5 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_DISP1_DAT19__BOOT_WEIM_MUXED1 (_MX51_PAD_DISP1_DAT19__BOOT_WEIM_MUXED1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_DISP1_DAT19__DISP1_DAT19 (_MX51_PAD_DISP1_DAT19__DISP1_DAT19 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_DISP1_DAT19__DISP2_PIN12 (_MX51_PAD_DISP1_DAT19__DISP2_PIN12 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_DISP1_DAT19__DISP2_PIN6 (_MX51_PAD_DISP1_DAT19__DISP2_PIN6 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_DISP1_DAT20__BOOT_MEM_TYPE0 (_MX51_PAD_DISP1_DAT20__BOOT_MEM_TYPE0 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_DISP1_DAT20__DISP1_DAT20 (_MX51_PAD_DISP1_DAT20__DISP1_DAT20 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_DISP1_DAT20__DISP2_PIN13 (_MX51_PAD_DISP1_DAT20__DISP2_PIN13 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_DISP1_DAT20__DISP2_PIN7 (_MX51_PAD_DISP1_DAT20__DISP2_PIN7 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_DISP1_DAT21__BOOT_MEM_TYPE1 (_MX51_PAD_DISP1_DAT21__BOOT_MEM_TYPE1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_DISP1_DAT21__DISP1_DAT21 (_MX51_PAD_DISP1_DAT21__DISP1_DAT21 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_DISP1_DAT21__DISP2_PIN14 (_MX51_PAD_DISP1_DAT21__DISP2_PIN14 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_DISP1_DAT21__DISP2_PIN8 (_MX51_PAD_DISP1_DAT21__DISP2_PIN8 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_DISP1_DAT22__BOOT_LPB_FREQ0 (_MX51_PAD_DISP1_DAT22__BOOT_LPB_FREQ0 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_DISP1_DAT22__DISP1_DAT22 (_MX51_PAD_DISP1_DAT22__DISP1_DAT22 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_DISP1_DAT22__DISP2_D0_CS (_MX51_PAD_DISP1_DAT22__DISP2_D0_CS | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_DISP1_DAT22__DISP2_DAT16 (_MX51_PAD_DISP1_DAT22__DISP2_DAT16 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_DISP1_DAT23__BOOT_LPB_FREQ1 (_MX51_PAD_DISP1_DAT23__BOOT_LPB_FREQ1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_DISP1_DAT23__DISP1_DAT23 (_MX51_PAD_DISP1_DAT23__DISP1_DAT23 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_DISP1_DAT23__DISP2_D1_CS (_MX51_PAD_DISP1_DAT23__DISP2_D1_CS | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_DISP1_DAT23__DISP2_DAT17 (_MX51_PAD_DISP1_DAT23__DISP2_DAT17 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_DISP1_DAT23__DISP2_SER_CS (_MX51_PAD_DISP1_DAT23__DISP2_SER_CS | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_DI1_PIN3__DI1_PIN3 (_MX51_PAD_DI1_PIN3__DI1_PIN3 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_DI1_PIN2__DI1_PIN2 (_MX51_PAD_DI1_PIN2__DI1_PIN2 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_DI_GP2__DISP1_SER_CLK (_MX51_PAD_DI_GP2__DISP1_SER_CLK | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_DI_GP2__DISP2_WAIT (_MX51_PAD_DI_GP2__DISP2_WAIT | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_DI_GP3__CSI1_DATA_EN (_MX51_PAD_DI_GP3__CSI1_DATA_EN | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_DI_GP3__DISP1_SER_DIO (_MX51_PAD_DI_GP3__DISP1_SER_DIO | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_DI_GP3__FEC_TX_ER (_MX51_PAD_DI_GP3__FEC_TX_ER | MUX_PAD_CTRL(MX51_PAD_CTRL_5)) +#define MX51_PAD_DI2_PIN4__CSI2_DATA_EN (_MX51_PAD_DI2_PIN4__CSI2_DATA_EN | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_DI2_PIN4__DI2_PIN4 (_MX51_PAD_DI2_PIN4__DI2_PIN4 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_DI2_PIN4__FEC_CRS (_MX51_PAD_DI2_PIN4__FEC_CRS | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_DI2_PIN2__DI2_PIN2 (_MX51_PAD_DI2_PIN2__DI2_PIN2 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_DI2_PIN2__FEC_MDC (_MX51_PAD_DI2_PIN2__FEC_MDC | MUX_PAD_CTRL(MX51_PAD_CTRL_5)) +#define MX51_PAD_DI2_PIN3__DI2_PIN3 (_MX51_PAD_DI2_PIN3__DI2_PIN3 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_DI2_PIN3__FEC_MDIO (_MX51_PAD_DI2_PIN3__FEC_MDIO | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_DI2_DISP_CLK__DI2_DISP_CLK (_MX51_PAD_DI2_DISP_CLK__DI2_DISP_CLK | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_DI2_DISP_CLK__FEC_RDATA1 (_MX51_PAD_DI2_DISP_CLK__FEC_RDATA1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_DI_GP4__DI2_PIN15 (_MX51_PAD_DI_GP4__DI2_PIN15 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_DI_GP4__DISP1_SER_DIN (_MX51_PAD_DI_GP4__DISP1_SER_DIN | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_DI_GP4__DISP2_PIN1 (_MX51_PAD_DI_GP4__DISP2_PIN1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_DI_GP4__FEC_RDATA2 (_MX51_PAD_DI_GP4__FEC_RDATA2 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_DISP2_DAT0__DISP2_DAT0 (_MX51_PAD_DISP2_DAT0__DISP2_DAT0 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_DISP2_DAT0__FEC_RDATA3 (_MX51_PAD_DISP2_DAT0__FEC_RDATA3 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_DISP2_DAT0__KEY_COL6 (_MX51_PAD_DISP2_DAT0__KEY_COL6 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_DISP2_DAT0__UART3_RXD (_MX51_PAD_DISP2_DAT0__UART3_RXD | MUX_PAD_CTRL(MX51_UART_PAD_CTRL)) +#define MX51_PAD_DISP2_DAT0__USBH3_CLK (_MX51_PAD_DISP2_DAT0__USBH3_CLK | MUX_PAD_CTRL(MX51_UART_PAD_CTRL)) +#define MX51_PAD_DISP2_DAT1__DISP2_DAT1 (_MX51_PAD_DISP2_DAT1__DISP2_DAT1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_DISP2_DAT1__FEC_RX_ER (_MX51_PAD_DISP2_DAT1__FEC_RX_ER | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_DISP2_DAT1__KEY_COL7 (_MX51_PAD_DISP2_DAT1__KEY_COL7 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_DISP2_DAT1__UART3_TXD (_MX51_PAD_DISP2_DAT1__UART3_TXD | MUX_PAD_CTRL(MX51_UART_PAD_CTRL)) +#define MX51_PAD_DISP2_DAT1__USBH3_DIR (_MX51_PAD_DISP2_DAT1__USBH3_DIR | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_DISP2_DAT2__DISP2_DAT2 (_MX51_PAD_DISP2_DAT2__DISP2_DAT2 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_DISP2_DAT3__DISP2_DAT3 (_MX51_PAD_DISP2_DAT3__DISP2_DAT3 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_DISP2_DAT4__DISP2_DAT4 (_MX51_PAD_DISP2_DAT4__DISP2_DAT4 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_DISP2_DAT5__DISP2_DAT5 (_MX51_PAD_DISP2_DAT5__DISP2_DAT5 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_DISP2_DAT6__DISP2_DAT6 (_MX51_PAD_DISP2_DAT6__DISP2_DAT6 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_DISP2_DAT6__FEC_TDATA1 (_MX51_PAD_DISP2_DAT6__FEC_TDATA1 | MUX_PAD_CTRL(MX51_PAD_CTRL_5)) +#define MX51_PAD_DISP2_DAT6__GPIO1_19 (_MX51_PAD_DISP2_DAT6__GPIO1_19 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_DISP2_DAT6__KEY_ROW4 (_MX51_PAD_DISP2_DAT6__KEY_ROW4 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_DISP2_DAT6__USBH3_STP (_MX51_PAD_DISP2_DAT6__USBH3_STP | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_DISP2_DAT7__DISP2_DAT7 (_MX51_PAD_DISP2_DAT7__DISP2_DAT7 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_DISP2_DAT7__FEC_TDATA2 (_MX51_PAD_DISP2_DAT7__FEC_TDATA2 | MUX_PAD_CTRL(MX51_PAD_CTRL_5)) +#define MX51_PAD_DISP2_DAT7__GPIO1_29 (_MX51_PAD_DISP2_DAT7__GPIO1_29 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_DISP2_DAT7__KEY_ROW5 (_MX51_PAD_DISP2_DAT7__KEY_ROW5 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_DISP2_DAT7__USBH3_NXT (_MX51_PAD_DISP2_DAT7__USBH3_NXT | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_DISP2_DAT8__DISP2_DAT8 (_MX51_PAD_DISP2_DAT8__DISP2_DAT8 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_DISP2_DAT8__FEC_TDATA3 (_MX51_PAD_DISP2_DAT8__FEC_TDATA3 | MUX_PAD_CTRL(MX51_PAD_CTRL_5)) +#define MX51_PAD_DISP2_DAT8__GPIO1_30 (_MX51_PAD_DISP2_DAT8__GPIO1_30 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_DISP2_DAT8__KEY_ROW6 (_MX51_PAD_DISP2_DAT8__KEY_ROW6 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_DISP2_DAT8__USBH3_DATA0 (_MX51_PAD_DISP2_DAT8__USBH3_DATA0 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_DISP2_DAT9__AUD6_RXC (_MX51_PAD_DISP2_DAT9__AUD6_RXC | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_DISP2_DAT9__DISP2_DAT9 (_MX51_PAD_DISP2_DAT9__DISP2_DAT9 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_DISP2_DAT9__FEC_TX_EN (_MX51_PAD_DISP2_DAT9__FEC_TX_EN | MUX_PAD_CTRL(MX51_PAD_CTRL_5)) +#define MX51_PAD_DISP2_DAT9__GPIO1_31 (_MX51_PAD_DISP2_DAT9__GPIO1_31 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_DISP2_DAT9__USBH3_DATA1 (_MX51_PAD_DISP2_DAT9__USBH3_DATA1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_DISP2_DAT10__DISP2_DAT10 (_MX51_PAD_DISP2_DAT10__DISP2_DAT10 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_DISP2_DAT10__DISP2_SER_CS (_MX51_PAD_DISP2_DAT10__DISP2_SER_CS | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_DISP2_DAT10__FEC_COL (_MX51_PAD_DISP2_DAT10__FEC_COL | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_DISP2_DAT10__KEY_ROW7 (_MX51_PAD_DISP2_DAT10__KEY_ROW7 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_DISP2_DAT10__USBH3_DATA2 (_MX51_PAD_DISP2_DAT10__USBH3_DATA2 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_DISP2_DAT11__AUD6_TXD (_MX51_PAD_DISP2_DAT11__AUD6_TXD | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_DISP2_DAT11__DISP2_DAT11 (_MX51_PAD_DISP2_DAT11__DISP2_DAT11 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_DISP2_DAT11__FEC_RX_CLK (_MX51_PAD_DISP2_DAT11__FEC_RX_CLK | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_DISP2_DAT11__GPIO1_10 (_MX51_PAD_DISP2_DAT11__GPIO1_10 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_DISP2_DAT11__USBH3_DATA3 (_MX51_PAD_DISP2_DAT11__USBH3_DATA3 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_DISP2_DAT12__AUD6_RXD (_MX51_PAD_DISP2_DAT12__AUD6_RXD | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_DISP2_DAT12__DISP2_DAT12 (_MX51_PAD_DISP2_DAT12__DISP2_DAT12 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_DISP2_DAT12__FEC_RX_DV (_MX51_PAD_DISP2_DAT12__FEC_RX_DV | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_DISP2_DAT12__USBH3_DATA4 (_MX51_PAD_DISP2_DAT12__USBH3_DATA4 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_DISP2_DAT13__AUD6_TXC (_MX51_PAD_DISP2_DAT13__AUD6_TXC | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_DISP2_DAT13__DISP2_DAT13 (_MX51_PAD_DISP2_DAT13__DISP2_DAT13 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_DISP2_DAT13__FEC_TX_CLK (_MX51_PAD_DISP2_DAT13__FEC_TX_CLK | MUX_PAD_CTRL(MX51_PAD_CTRL_4)) +#define MX51_PAD_DISP2_DAT13__USBH3_DATA5 (_MX51_PAD_DISP2_DAT13__USBH3_DATA5 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_DISP2_DAT14__AUD6_TXFS (_MX51_PAD_DISP2_DAT14__AUD6_TXFS | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_DISP2_DAT14__DISP2_DAT14 (_MX51_PAD_DISP2_DAT14__DISP2_DAT14 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_DISP2_DAT14__FEC_RDATA0 (_MX51_PAD_DISP2_DAT14__FEC_RDATA0 | MUX_PAD_CTRL(MX51_PAD_CTRL_4)) +#define MX51_PAD_DISP2_DAT14__USBH3_DATA6 (_MX51_PAD_DISP2_DAT14__USBH3_DATA6 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_DISP2_DAT15__AUD6_RXFS (_MX51_PAD_DISP2_DAT15__AUD6_RXFS | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_DISP2_DAT15__DISP1_SER_CS (_MX51_PAD_DISP2_DAT15__DISP1_SER_CS | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_DISP2_DAT15__DISP2_DAT15 (_MX51_PAD_DISP2_DAT15__DISP2_DAT15 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_DISP2_DAT15__FEC_TDATA0 (_MX51_PAD_DISP2_DAT15__FEC_TDATA0 | MUX_PAD_CTRL(MX51_PAD_CTRL_5)) +#define MX51_PAD_DISP2_DAT15__USBH3_DATA7 (_MX51_PAD_DISP2_DAT15__USBH3_DATA7 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_SD1_CMD__AUD5_RXFS (_MX51_PAD_SD1_CMD__AUD5_RXFS | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_SD1_CMD__CSPI_MOSI (_MX51_PAD_SD1_CMD__CSPI_MOSI | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_SD1_CMD__SD1_CMD (_MX51_PAD_SD1_CMD__SD1_CMD | MUX_PAD_CTRL(MX51_SDHCI_PAD_CTRL)) +#define MX51_PAD_SD1_CLK__AUD5_RXC (_MX51_PAD_SD1_CLK__AUD5_RXC | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_SD1_CLK__CSPI_SCLK (_MX51_PAD_SD1_CLK__CSPI_SCLK | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_SD1_CLK__SD1_CLK (_MX51_PAD_SD1_CLK__SD1_CLK | MUX_PAD_CTRL(MX51_SDHCI_PAD_CTRL | PAD_CTL_HYS)) +#define MX51_PAD_SD1_DATA0__AUD5_TXD (_MX51_PAD_SD1_DATA0__AUD5_TXD | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_SD1_DATA0__CSPI_MISO (_MX51_PAD_SD1_DATA0__CSPI_MISO | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL)) +#define MX51_PAD_SD1_DATA0__SD1_DATA0 (_MX51_PAD_SD1_DATA0__SD1_DATA0 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_EIM_DA0__EIM_DA0 (_MX51_PAD_EIM_DA0__EIM_DA0 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_EIM_DA1__EIM_DA1 (_MX51_PAD_EIM_DA1__EIM_DA1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_EIM_DA2__EIM_DA2 (_MX51_PAD_EIM_DA2__EIM_DA2 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_EIM_DA3__EIM_DA3 (_MX51_PAD_EIM_DA3__EIM_DA3 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_SD1_DATA1__AUD5_RXD (_MX51_PAD_SD1_DATA1__AUD5_RXD | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_SD1_DATA1__SD1_DATA1 (_MX51_PAD_SD1_DATA1__SD1_DATA1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_EIM_DA4__EIM_DA4 (_MX51_PAD_EIM_DA4__EIM_DA4 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_EIM_DA5__EIM_DA5 (_MX51_PAD_EIM_DA5__EIM_DA5 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_EIM_DA6__EIM_DA6 (_MX51_PAD_EIM_DA6__EIM_DA6 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_EIM_DA7__EIM_DA7 (_MX51_PAD_EIM_DA7__EIM_DA7 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_SD1_DATA2__AUD5_TXC (_MX51_PAD_SD1_DATA2__AUD5_TXC | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_SD1_DATA2__SD1_DATA2 (_MX51_PAD_SD1_DATA2__SD1_DATA2 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_EIM_DA10__EIM_DA10 (_MX51_PAD_EIM_DA10__EIM_DA10 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_EIM_DA11__EIM_DA11 (_MX51_PAD_EIM_DA11__EIM_DA11 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_EIM_DA8__EIM_DA8 (_MX51_PAD_EIM_DA8__EIM_DA8 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_EIM_DA9__EIM_DA9 (_MX51_PAD_EIM_DA9__EIM_DA9 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_SD1_DATA3__AUD5_TXFS (_MX51_PAD_SD1_DATA3__AUD5_TXFS | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_SD1_DATA3__CSPI_SS1 (_MX51_PAD_SD1_DATA3__CSPI_SS1 | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL)) +#define MX51_PAD_SD1_DATA3__SD1_DATA3 (_MX51_PAD_SD1_DATA3__SD1_DATA3 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_GPIO1_0__CSPI_SS2 (_MX51_PAD_GPIO1_0__CSPI_SS2 | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL)) +#define MX51_PAD_GPIO1_0__GPIO1_0 (_MX51_PAD_GPIO1_0__GPIO1_0 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_GPIO1_0__SD1_CD (_MX51_PAD_GPIO1_0__SD1_CD | MUX_PAD_CTRL(MX51_ESDHC_PAD_CTRL)) +#define MX51_PAD_GPIO1_1__CSPI_MISO (_MX51_PAD_GPIO1_1__CSPI_MISO | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL)) +#define MX51_PAD_GPIO1_1__GPIO1_1 (_MX51_PAD_GPIO1_1__GPIO1_1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_GPIO1_1__SD1_WP (_MX51_PAD_GPIO1_1__SD1_WP | MUX_PAD_CTRL(MX51_ESDHC_PAD_CTRL)) +#define MX51_PAD_EIM_DA12__EIM_DA12 (_MX51_PAD_EIM_DA12__EIM_DA12 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_EIM_DA13__EIM_DA13 (_MX51_PAD_EIM_DA13__EIM_DA13 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_EIM_DA14__EIM_DA14 (_MX51_PAD_EIM_DA14__EIM_DA14 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_EIM_DA15__EIM_DA15 (_MX51_PAD_EIM_DA15__EIM_DA15 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_SD2_CMD__CSPI_MOSI (_MX51_PAD_SD2_CMD__CSPI_MOSI | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL)) +#define MX51_PAD_SD2_CMD__I2C1_SCL (_MX51_PAD_SD2_CMD__I2C1_SCL | MUX_PAD_CTRL(MX51_I2C_PAD_CTRL)) +#define MX51_PAD_SD2_CMD__SD2_CMD (_MX51_PAD_SD2_CMD__SD2_CMD | MUX_PAD_CTRL(MX51_SDHCI_PAD_CTRL)) +#define MX51_PAD_SD2_CLK__CSPI_SCLK (_MX51_PAD_SD2_CLK__CSPI_SCLK | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL)) +#define MX51_PAD_SD2_CLK__I2C1_SDA (_MX51_PAD_SD2_CLK__I2C1_SDA | MUX_PAD_CTRL(MX51_I2C_PAD_CTRL)) +#define MX51_PAD_SD2_CLK__SD2_CLK (_MX51_PAD_SD2_CLK__SD2_CLK | MUX_PAD_CTRL(MX51_SDHCI_PAD_CTRL | PAD_CTL_HYS)) +#define MX51_PAD_SD2_DATA0__CSPI_MISO (_MX51_PAD_SD2_DATA0__CSPI_MISO | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL)) +#define MX51_PAD_SD2_DATA0__SD1_DAT4 (_MX51_PAD_SD2_DATA0__SD1_DAT4 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_SD2_DATA0__SD2_DATA0 (_MX51_PAD_SD2_DATA0__SD2_DATA0 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_SD2_DATA1__SD1_DAT5 (_MX51_PAD_SD2_DATA1__SD1_DAT5 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_SD2_DATA1__SD2_DATA1 (_MX51_PAD_SD2_DATA1__SD2_DATA1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_SD2_DATA1__USBH3_H2_DP (_MX51_PAD_SD2_DATA1__USBH3_H2_DP | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_SD2_DATA2__SD1_DAT6 (_MX51_PAD_SD2_DATA2__SD1_DAT6 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_SD2_DATA2__SD2_DATA2 (_MX51_PAD_SD2_DATA2__SD2_DATA2 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_SD2_DATA2__USBH3_H2_DM (_MX51_PAD_SD2_DATA2__USBH3_H2_DM | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_SD2_DATA3__CSPI_SS2 (_MX51_PAD_SD2_DATA3__CSPI_SS2 | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL)) +#define MX51_PAD_SD2_DATA3__SD1_DAT7 (_MX51_PAD_SD2_DATA3__SD1_DAT7 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_SD2_DATA3__SD2_DATA3 (_MX51_PAD_SD2_DATA3__SD2_DATA3 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_GPIO1_2__CCM_OUT_2 (_MX51_PAD_GPIO1_2__CCM_OUT_2 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_GPIO1_2__GPIO1_2 (_MX51_PAD_GPIO1_2__GPIO1_2 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_GPIO1_2__I2C2_SCL (_MX51_PAD_GPIO1_2__I2C2_SCL | MUX_PAD_CTRL(MX51_I2C_PAD_CTRL)) +#define MX51_PAD_GPIO1_2__PLL1_BYP (_MX51_PAD_GPIO1_2__PLL1_BYP | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_GPIO1_2__PWM1_PWMO (_MX51_PAD_GPIO1_2__PWM1_PWMO | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_GPIO1_3__GPIO1_3 (_MX51_PAD_GPIO1_3__GPIO1_3 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_GPIO1_3__I2C2_SDA (_MX51_PAD_GPIO1_3__I2C2_SDA | MUX_PAD_CTRL(MX51_I2C_PAD_CTRL)) +#define MX51_PAD_GPIO1_3__PLL2_BYP (_MX51_PAD_GPIO1_3__PLL2_BYP | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_GPIO1_3__PWM2_PWMO (_MX51_PAD_GPIO1_3__PWM2_PWMO | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_PMIC_INT_REQ__PMIC_INT_REQ (_MX51_PAD_PMIC_INT_REQ__PMIC_INT_REQ | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_PMIC_INT_REQ__PMIC_PMU_IRQ_B (_MX51_PAD_PMIC_INT_REQ__PMIC_PMU_IRQ_B | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_GPIO1_4__DISP2_EXT_CLK (_MX51_PAD_GPIO1_4__DISP2_EXT_CLK | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_GPIO1_4__EIM_RDY (_MX51_PAD_GPIO1_4__EIM_RDY | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_GPIO1_4__GPIO1_4 (_MX51_PAD_GPIO1_4__GPIO1_4 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_GPIO1_4__WDOG1_WDOG_B (_MX51_PAD_GPIO1_4__WDOG1_WDOG_B | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_GPIO1_5__CSI2_MCLK (_MX51_PAD_GPIO1_5__CSI2_MCLK | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_GPIO1_5__DISP2_PIN16 (_MX51_PAD_GPIO1_5__DISP2_PIN16 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_GPIO1_5__GPIO1_5 (_MX51_PAD_GPIO1_5__GPIO1_5 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_GPIO1_5__WDOG2_WDOG_B (_MX51_PAD_GPIO1_5__WDOG2_WDOG_B | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_GPIO1_6__DISP2_PIN17 (_MX51_PAD_GPIO1_6__DISP2_PIN17 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_GPIO1_6__GPIO1_6 (_MX51_PAD_GPIO1_6__GPIO1_6 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_GPIO1_6__REF_EN_B (_MX51_PAD_GPIO1_6__REF_EN_B | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_GPIO1_7__CCM_OUT_0 (_MX51_PAD_GPIO1_7__CCM_OUT_0 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_GPIO1_7__GPIO1_7 (_MX51_PAD_GPIO1_7__GPIO1_7 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_GPIO1_7__SD2_WP (_MX51_PAD_GPIO1_7__SD2_WP | MUX_PAD_CTRL(MX51_ESDHC_PAD_CTRL)) +#define MX51_PAD_GPIO1_7__SPDIF_OUT1 (_MX51_PAD_GPIO1_7__SPDIF_OUT1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_GPIO1_8__CSI2_DATA_EN (_MX51_PAD_GPIO1_8__CSI2_DATA_EN | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_GPIO1_8__GPIO1_8 (_MX51_PAD_GPIO1_8__GPIO1_8 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_GPIO1_8__SD2_CD (_MX51_PAD_GPIO1_8__SD2_CD | MUX_PAD_CTRL(MX51_ESDHC_PAD_CTRL)) +#define MX51_PAD_GPIO1_8__USBH3_PWR (_MX51_PAD_GPIO1_8__USBH3_PWR | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_GPIO1_9__CCM_OUT_1 (_MX51_PAD_GPIO1_9__CCM_OUT_1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_GPIO1_9__DISP2_D1_CS (_MX51_PAD_GPIO1_9__DISP2_D1_CS | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_GPIO1_9__DISP2_SER_CS (_MX51_PAD_GPIO1_9__DISP2_SER_CS | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_GPIO1_9__GPIO1_9 (_MX51_PAD_GPIO1_9__GPIO1_9 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_GPIO1_9__SD2_LCTL (_MX51_PAD_GPIO1_9__SD2_LCTL | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX51_PAD_GPIO1_9__USBH3_OC (_MX51_PAD_GPIO1_9__USBH3_OC | MUX_PAD_CTRL(NO_PAD_CTRL)) #endif /* __MACH_IOMUX_MX51_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx53.h b/arch/arm/plat-mxc/include/mach/iomux-mx53.h new file mode 100644 index 00000000000..5deee019c29 --- /dev/null +++ b/arch/arm/plat-mxc/include/mach/iomux-mx53.h @@ -0,0 +1,323 @@ +/* + * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc.. + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + */ + +#ifndef __MACH_IOMUX_MX53_H__ +#define __MACH_IOMUX_MX53_H__ + +#include <mach/iomux-v3.h> + +/* + * various IOMUX alternate output functions (1-7) + */ +typedef enum iomux_config { + IOMUX_CONFIG_ALT0, + IOMUX_CONFIG_ALT1, + IOMUX_CONFIG_ALT2, + IOMUX_CONFIG_ALT3, + IOMUX_CONFIG_ALT4, + IOMUX_CONFIG_ALT5, + IOMUX_CONFIG_ALT6, + IOMUX_CONFIG_ALT7, + IOMUX_CONFIG_GPIO, /* added to help user use GPIO mode */ + IOMUX_CONFIG_SION = 0x1 << 4, /* LOOPBACK:MUX SION bit */ +} iomux_pin_cfg_t; + +/* These 2 defines are for pins that may not have a mux register, but could + * have a pad setting register, and vice-versa. */ +#define NON_MUX_I 0x00 +#define NON_PAD_I 0x00 + +#define MX53_UART_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \ + PAD_CTL_DSE_HIGH | PAD_CTL_SRE_FAST | PAD_CTL_HYS) +/* UART1 */ +#define MX53_PAD_CSI0_D10__UART1_TXD IOMUX_PAD(0x414, 0xE8, 2, 0x0, 0, MX53_UART_PAD_CTRL) +#define MX53_PAD_CSI0_D11__UART1_RXD IOMUX_PAD(0x418, 0xEC, 2, 0x878, 1, MX53_UART_PAD_CTRL) +#define MX53_PAD_ATA_DIOW__UART1_TXD IOMUX_PAD(0x5F0, 0x270, 3, 0x0, 0, MX53_UART_PAD_CTRL) +#define MX53_PAD_ATA_DMACK__UART1_RXD IOMUX_PAD(0x5F4, 0x274, 3, 0x880, 3, MX53_UART_PAD_CTRL) + +/* UART2 */ +#define MX53_PAD_ATA_BUFFER_EN__UART2_RXD IOMUX_PAD(0x5FC, 0x27C, 3, 0x880, 3, MX53_UART_PAD_CTRL) +#define MX53_PAD_ATA_DMARQ__UART2_TXD IOMUX_PAD(0x5F8, 0x278, 3, 0x0, 0, MX53_UART_PAD_CTRL) +#define MX53_PAD_ATA_DIOR__UART2_RTS IOMUX_PAD(0x604, 0x284, 3, 0x87C, 3, MX53_UART_PAD_CTRL) +#define MX53_PAD_ATA_INTRQ__UART2_CTS IOMUX_PAD(0x600, 0x280, 3, 0x0, 0, MX53_UART_PAD_CTRL) + +/* UART3 */ +#define MX53_PAD_ATA_CS_0__UART3_TXD IOMUX_PAD(0x61C, 0x29C, 4, 0x0, 0, MX53_UART_PAD_CTRL) +#define MX53_PAD_ATA_CS_1__UART3_RXD IOMUX_PAD(0x620, 0x2A0, 4, 0x888, 3, MX53_UART_PAD_CTRL) +#define MX53_PAD_ATA_DA_1__UART3_CTS IOMUX_PAD(0x614, 0x294, 4, 0x0, 0, MX53_UART_PAD_CTRL) +#define MX53_PAD_ATA_DA_2__UART3_RTS IOMUX_PAD(0x618, 0x298, 4, 0x884, 5, MX53_UART_PAD_CTRL) + +#define MX53_PAD_GPIO_19__GPIO_4_5 IOMUX_PAD(0x348, 0x20,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_KEY_COL0__GPIO_4_6 IOMUX_PAD(0x34C, 0x24,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_KEY_ROW0__GPIO_4_7 IOMUX_PAD(0x350, 0x28,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_KEY_COL1__GPIO_4_8 IOMUX_PAD(0x354, 0x2C,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_KEY_ROW1__GPIO_4_9 IOMUX_PAD(0x358, 0x30,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_KEY_COL2__GPIO_4_10 IOMUX_PAD(0x35C, 0x34,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_KEY_ROW2__GPIO_4_11 IOMUX_PAD(0x360, 0x38,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_KEY_COL3__GPIO_4_12 IOMUX_PAD(0x364, 0x3C,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_KEY_ROW3__GPIO_4_13 IOMUX_PAD(0x368, 0x40,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_KEY_COL4__GPIO_4_14 IOMUX_PAD(0x36C, 0x44,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_KEY_ROW4__GPIO_4_15 IOMUX_PAD(0x370, 0x48,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_NVCC_KEYPAD__NVCC_KEYPAD IOMUX_PAD(0x374, NON_MUX_I,IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_DI0_DISP_CLK__GPIO_4_16 IOMUX_PAD(0x378, 0x4C,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_DI0_PIN15__GPIO_4_17 IOMUX_PAD(0x37C, 0x50,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_DI0_PIN2__GPIO_4_18 IOMUX_PAD(0x380, 0x54,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_DI0_PIN3__GPIO_4_19 IOMUX_PAD(0x384, 0x58,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_DI0_PIN4__GPIO_4_20 IOMUX_PAD(0x388, 0x5C,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_DISP0_DAT0__GPIO_4_21 IOMUX_PAD(0x38C, 0x60,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_DISP0_DAT1__GPIO_4_22 IOMUX_PAD(0x390, 0x64,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_DISP0_DAT2__GPIO_4_23 IOMUX_PAD(0x394, 0x68,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_DISP0_DAT3__GPIO_4_24 IOMUX_PAD(0x398, 0x6C,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_DISP0_DAT4__GPIO_4_25 IOMUX_PAD(0x39C, 0x70,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_DISP0_DAT5__GPIO_4_26 IOMUX_PAD(0x3A0, 0x74,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_DISP0_DAT6__GPIO_4_27 IOMUX_PAD(0x3A4, 0x78,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_DISP0_DAT7__GPIO_4_28 IOMUX_PAD(0x3A8, 0x7C,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_DISP0_DAT8__GPIO_4_29 IOMUX_PAD(0x3AC, 0x80,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_DISP0_DAT9__GPIO_4_30 IOMUX_PAD(0x3B0, 0x84,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_DISP0_DAT10__GPIO_4_31 IOMUX_PAD(0x3B4, 0x88,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_DISP0_DAT11__GPIO_5_5 IOMUX_PAD(0x3B8, 0x8C,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_DISP0_DAT12__GPIO_5_6 IOMUX_PAD(0x3BC, 0x90,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_DISP0_DAT13__GPIO_5_7 IOMUX_PAD(0x3C0, 0x94,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_DISP0_DAT14__GPIO_5_8 IOMUX_PAD(0x3C4, 0x98,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_DISP0_DAT15__GPIO_5_9 IOMUX_PAD(0x3C8, 0x9C,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_DISP0_DAT16__GPIO_5_10 IOMUX_PAD(0x3CC, 0xA0,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_DISP0_DAT17__GPIO_5_11 IOMUX_PAD(0x3D0, 0xA4,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_DISP0_DAT18__GPIO_5_12 IOMUX_PAD(0x3D4, 0xA8,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_DISP0_DAT19__GPIO_5_13 IOMUX_PAD(0x3D8, 0xAC,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_DISP0_DAT20__GPIO_5_14 IOMUX_PAD(0x3DC, 0xB0,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_DISP0_DAT21__GPIO_5_15 IOMUX_PAD(0x3E0, 0xB4,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_DISP0_DAT22__GPIO_5_16 IOMUX_PAD(0x3E4, 0xB8,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_DISP0_DAT23__GPIO_5_17 IOMUX_PAD(0x3E8, 0xBC,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_CSI0_PIXCLK__GPIO_5_18 IOMUX_PAD(0x3EC, 0xC0,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_CSI0_MCLK__GPIO_5_19 IOMUX_PAD(0x3F0, 0xC4,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_CSI0_DATA_EN__GPIO_5_20 IOMUX_PAD(0x3F4, 0xC8,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_CSI0_VSYNC__GPIO_5_21 IOMUX_PAD(0x3F8, 0xCC,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_CSI0_D4__GPIO_5_22 IOMUX_PAD(0x3FC, 0xD0,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_CSI0_D5__GPIO_5_23 IOMUX_PAD(0x400, 0xD4,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_CSI0_D6__GPIO_5_24 IOMUX_PAD(0x404, 0xD8,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_CSI0_D7__GPIO_5_25 IOMUX_PAD(0x408, 0xDC,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_CSI0_D8__GPIO_5_26 IOMUX_PAD(0x40C, 0xE0,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_CSI0_D9__GPIO_5_27 IOMUX_PAD(0x410, 0xE4,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_CSI0_D10__GPIO_5_28 IOMUX_PAD(0x414, 0xE8,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_CSI0_D11__GPIO_5_29 IOMUX_PAD(0x418, 0xEC,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_CSI0_D12__GPIO_5_30 IOMUX_PAD(0x41C, 0xF0,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_CSI0_D13__GPIO_5_31 IOMUX_PAD(0x420, 0xF4,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_CSI0_D14__GPIO_6_0 IOMUX_PAD(0x424, 0xF8,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_CSI0_D15__GPIO_6_1 IOMUX_PAD(0x428, 0xFC,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_CSI0_D16__GPIO_6_2 IOMUX_PAD(0x42C, 0x100,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_CSI0_D17__GPIO_6_3 IOMUX_PAD(0x430, 0x104,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_CSI0_D18__GPIO_6_4 IOMUX_PAD(0x434, 0x108,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_CSI0_D19__GPIO_6_5 IOMUX_PAD(0x438, 0x10C,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_NVCC_CSI0__NVCC_CSI0 IOMUX_PAD(0x43C, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_JTAG_TMS__JTAG_TMS IOMUX_PAD(0x440, NON_MUX_I,IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_JTAG_MOD__JTAG_MOD IOMUX_PAD(0x444, NON_MUX_I,IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_JTAG_TRSTB__JTAG_TRSTB IOMUX_PAD(0x448, NON_MUX_I,IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_JTAG_TDI__JTAG_TDI IOMUX_PAD(0x44C, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_JTAG_TCK__JTAG_TCK IOMUX_PAD(0x450, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_JTAG_TDO__JTAG_TDO IOMUX_PAD(0x454, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_EIM_A25__GPIO_5_2 IOMUX_PAD(0x458, 0x110,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_EIM_EB2__GPIO_2_30 IOMUX_PAD(0x45C, 0x114,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_EIM_D16__GPIO_3_16 IOMUX_PAD(0x460, 0x118,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_EIM_D17__GPIO_3_17 IOMUX_PAD(0x464, 0x11C,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_EIM_D18__GPIO_3_18 IOMUX_PAD(0x468, 0x120,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_EIM_D19__GPIO_3_19 IOMUX_PAD(0x46C, 0x124,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_EIM_D20__GPIO_3_20 IOMUX_PAD(0x470, 0x128,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_EIM_D21__GPIO_3_21 IOMUX_PAD(0x474, 0x12C,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_EIM_D22__GPIO_3_22 IOMUX_PAD(0x478, 0x130,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_EIM_D23__GPIO_3_23 IOMUX_PAD(0x47C, 0x134,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_EIM_EB3__GPIO_2_31 IOMUX_PAD(0x480, 0x138,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_EIM_D24__GPIO_3_24 IOMUX_PAD(0x484, 0x13C,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_EIM_D25__GPIO_3_25 IOMUX_PAD(0x488, 0x140,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_EIM_D26__GPIO_3_26 IOMUX_PAD(0x48C, 0x144,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_EIM_D27__GPIO_3_27 IOMUX_PAD(0x490, 0x148,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_EIM_D28__GPIO_3_28 IOMUX_PAD(0x494, 0x14C,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_EIM_D29__GPIO_3_29 IOMUX_PAD(0x498, 0x150,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_EIM_D30__GPIO_3_30 IOMUX_PAD(0x49C, 0x154,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_EIM_D31__GPIO_3_31 IOMUX_PAD(0x4A0, 0x158,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_NVCC_EIM1__NVCC_EIM1 IOMUX_PAD(0x4A4, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_EIM_A24__GPIO_5_4 IOMUX_PAD(0x4A8, 0x15C,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_EIM_A23__GPIO_6_6 IOMUX_PAD(0x4AC, 0x160,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_EIM_A22__GPIO_2_16 IOMUX_PAD(0x4B0, 0x164,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_EIM_A21__GPIO_2_17 IOMUX_PAD(0x4B4, 0x168,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_EIM_A20__GPIO_2_18 IOMUX_PAD(0x4B8, 0x16C,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_EIM_A19__GPIO_2_19 IOMUX_PAD(0x4BC, 0x170,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_EIM_A18__GPIO_2_20 IOMUX_PAD(0x4C0, 0x174,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_EIM_A17__GPIO_2_21 IOMUX_PAD(0x4C4, 0x178,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_EIM_A16__GPIO_2_22 IOMUX_PAD(0x4C8, 0x17C,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_EIM_CS0__GPIO_2_23 IOMUX_PAD(0x4CC, 0x180,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_EIM_CS1__GPIO_2_24 IOMUX_PAD(0x4D0, 0x184,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_EIM_OE__GPIO_2_25 IOMUX_PAD(0x4D4, 0x188,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_EIM_RW__GPIO_2_26 IOMUX_PAD(0x4D8, 0x18C,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_EIM_LBA__GPIO_2_27 IOMUX_PAD(0x4DC, 0x190,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_NVCC_EIM4__NVCC_EIM4 IOMUX_PAD(0x4E0, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_EIM_EB0__GPIO_2_28 IOMUX_PAD(0x4E4, 0x194,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_EIM_EB1__GPIO_2_29 IOMUX_PAD(0x4E8, 0x198,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_EIM_DA0__GPIO_3_0 IOMUX_PAD(0x4EC, 0x19C,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_EIM_DA1__GPIO_3_1 IOMUX_PAD(0x4F0, 0x1A0,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_EIM_DA2__GPIO_3_2 IOMUX_PAD(0x4F4, 0x1A4,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_EIM_DA3__GPIO_3_3 IOMUX_PAD(0x4F8, 0x1A8,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_EIM_DA4__GPIO_3_4 IOMUX_PAD(0x4FC, 0x1AC,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_EIM_DA5__GPIO_3_5 IOMUX_PAD(0x500, 0x1B0,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_EIM_DA6__GPIO_3_6 IOMUX_PAD(0x504, 0x1B4,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_EIM_DA7__GPIO_3_7 IOMUX_PAD(0x508, 0x1B8,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_EIM_DA8__GPIO_3_8 IOMUX_PAD(0x50C, 0x1BC,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_EIM_DA9__GPIO_3_9 IOMUX_PAD(0x510, 0x1C0,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_EIM_DA10__GPIO_3_10 IOMUX_PAD(0x514, 0x1C4,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_EIM_DA11__GPIO_3_11 IOMUX_PAD(0x518, 0x1C8,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_EIM_DA12__GPIO_3_12 IOMUX_PAD(0x51C, 0x1CC,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_EIM_DA13__GPIO_3_13 IOMUX_PAD(0x520, 0x1D0,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_EIM_DA14__GPIO_3_14 IOMUX_PAD(0x524, 0x1D4,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_EIM_DA15__GPIO_3_15 IOMUX_PAD(0x528, 0x1D8,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_NANDF_WE_B__GPIO_6_12 IOMUX_PAD(0x52C, 0x1DC,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_NANDF_RE_B__GPIO_6_13 IOMUX_PAD(0x530, 0x1E0,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_EIM_WAIT__GPIO_5_0 IOMUX_PAD(0x534, 0x1E4,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_EIM_BCLK__EIM_BCLK IOMUX_PAD(0x538, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_NVCC_EIM7__NVCC_EIM7 IOMUX_PAD(0x53C, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_LVDS1_TX3_P__GPIO_6_22 IOMUX_PAD(NON_PAD_I, 0x1EC, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_LVDS1_TX2_P__GPIO_6_24 IOMUX_PAD(NON_PAD_I, 0x1F0, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_LVDS1_CLK_P__GPIO_6_26 IOMUX_PAD(NON_PAD_I, 0x1F4, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_LVDS1_TX1_P__GPIO_6_28 IOMUX_PAD(NON_PAD_I, 0x1F8, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_LVDS1_TX0_P__GPIO_6_30 IOMUX_PAD(NON_PAD_I, 0x1FC, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_LVDS0_TX3_P__GPIO_7_22 IOMUX_PAD(NON_PAD_I, 0x200, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_LVDS0_CLK_P__GPIO_7_24 IOMUX_PAD(NON_PAD_I, 0x204, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_LVDS0_TX2_P__GPIO_7_26 IOMUX_PAD(NON_PAD_I, 0x208, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_LVDS0_TX1_P__GPIO_7_28 IOMUX_PAD(NON_PAD_I, 0x20C, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_LVDS0_TX0_P__GPIO_7_30 IOMUX_PAD(NON_PAD_I, 0x210, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_GPIO_10__GPIO_4_0 IOMUX_PAD(0x540, 0x214, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_GPIO_11__GPIO_4_1 IOMUX_PAD(0x544, 0x218, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_GPIO_12__GPIO_4_2 IOMUX_PAD(0x548, 0x21C, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_GPIO_13__GPIO_4_3 IOMUX_PAD(0x54C, 0x220, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_GPIO_14__GPIO_4_4 IOMUX_PAD(0x550, 0x224, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_DRAM_DQM3__DRAM_DQM3 IOMUX_PAD(0x554, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_DRAM_SDQS3__DRAM_SDQS3 IOMUX_PAD(0x558, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_DRAM_SDCKE1__DRAM_SDCKE1 IOMUX_PAD(0x55C, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_DRAM_DQM2__DRAM_DQM2 IOMUX_PAD(0x560, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_DRAM_SDODT1__DRAM_SDODT1 IOMUX_PAD(0x564, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_DRAM_SDQS2__DRAM_SDQS2 IOMUX_PAD(0x568, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_DRAM_RESET__DRAM_RESET IOMUX_PAD(0x56C, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_DRAM_SDCLK1__DRAM_SDCLK1 IOMUX_PAD(0x570, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_DRAM_CAS__DRAM_CAS IOMUX_PAD(0x574, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_DRAM_SDCLK0__DRAM_SDCLK0 IOMUX_PAD(0x578, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_DRAM_SDQS0__DRAM_SDQS0 IOMUX_PAD(0x57C, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_DRAM_SDODT0__DRAM_SDODT0 IOMUX_PAD(0x580, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_DRAM_DQM0__DRAM_DQM0 IOMUX_PAD(0x584, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_DRAM_RAS__DRAM_RAS IOMUX_PAD(0x588, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_DRAM_SDCKE0__DRAM_SDCKE0 IOMUX_PAD(0x58C, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_DRAM_SDQS1__DRAM_SDQS1 IOMUX_PAD(0x590, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_DRAM_DQM1__DRAM_DQM1 IOMUX_PAD(0x594, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_PMIC_ON_REQ__PMIC_ON_REQ IOMUX_PAD(0x598, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_PMIC_STBY_REQ__PMIC_STBY_REQ IOMUX_PAD(0x59C, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_NANDF_CLE__GPIO_6_7 IOMUX_PAD(0x5A0, 0x228,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_NANDF_ALE__GPIO_6_8 IOMUX_PAD(0x5A4, 0x22C,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_NANDF_WP_B__GPIO_6_9 IOMUX_PAD(0x5A8, 0x230,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_NANDF_RB0__GPIO_6_10 IOMUX_PAD(0x5AC, 0x234,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_NANDF_CS0__GPIO_6_11 IOMUX_PAD(0x5B0, 0x238,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_NANDF_CS1__GPIO_6_14 IOMUX_PAD(0x5B4, 0x23C,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_NANDF_CS2__GPIO_6_15 IOMUX_PAD(0x5B8, 0x240,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_NANDF_CS3__GPIO_6_16 IOMUX_PAD(0x5BC, 0x244,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_NVCC_NANDF__NVCC_NANDF IOMUX_PAD(0x5C0, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_FEC_MDIO__GPIO_1_22 IOMUX_PAD(0x5C4, 0x248,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_FEC_REF_CLK__GPIO_1_23 IOMUX_PAD(0x5C8, 0x24C,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_FEC_RX_ER__GPIO_1_24 IOMUX_PAD(0x5CC, 0x250,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_FEC_CRS_DV__GPIO_1_25 IOMUX_PAD(0x5D0, 0x254,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_FEC_RXD1__GPIO_1_26 IOMUX_PAD(0x5D4, 0x258,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_FEC_RXD0__GPIO_1_27 IOMUX_PAD(0x5D8, 0x25C,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_FEC_TX_EN__GPIO_1_28 IOMUX_PAD(0x5DC, 0x260,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_FEC_TXD1__GPIO_1_29 IOMUX_PAD(0x5E0, 0x264,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_FEC_TXD0__GPIO_1_30 IOMUX_PAD(0x5E4, 0x268,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_FEC_MDC__GPIO_1_31 IOMUX_PAD(0x5E8, 0x26C,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_NVCC_FEC__NVCC_FEC IOMUX_PAD(0x5EC, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_ATA_DIOW__GPIO_6_17 IOMUX_PAD(0x5F0, 0x270,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_ATA_DMACK__GPIO_6_18 IOMUX_PAD(0x5F4, 0x274,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_ATA_DMARQ__GPIO_7_0 IOMUX_PAD(0x5F8, 0x278,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_ATA_BUFFER_EN__GPIO_7_1 IOMUX_PAD(0x5FC, 0x27C,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_ATA_INTRQ__GPIO_7_2 IOMUX_PAD(0x600, 0x280,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_ATA_DIOR__GPIO_7_3 IOMUX_PAD(0x604, 0x284,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_ATA_RESET_B__GPIO_7_4 IOMUX_PAD(0x608, 0x288,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_ATA_IORDY__GPIO_7_5 IOMUX_PAD(0x60C, 0x28C,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_ATA_DA_0__GPIO_7_6 IOMUX_PAD(0x610, 0x290,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_ATA_DA_1__GPIO_7_7 IOMUX_PAD(0x614, 0x294,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_ATA_DA_2__GPIO_7_8 IOMUX_PAD(0x618, 0x298,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_ATA_CS_0__GPIO_7_9 IOMUX_PAD(0x61C, 0x29C,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_ATA_CS_1__GPIO_7_10 IOMUX_PAD(0x620, 0x2A0,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_NVCC_ATA2__NVCC_ATA2 IOMUX_PAD(0x624, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_ATA_DATA0__GPIO_2_0 IOMUX_PAD(0x628, 0x2A4,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_ATA_DATA1__GPIO_2_1 IOMUX_PAD(0x62C, 0x2A8,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_ATA_DATA2__GPIO_2_2 IOMUX_PAD(0x630, 0x2AC,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_ATA_DATA3__GPIO_2_3 IOMUX_PAD(0x634, 0x2B0,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_ATA_DATA4__GPIO_2_4 IOMUX_PAD(0x638, 0x2B4,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_ATA_DATA5__GPIO_2_5 IOMUX_PAD(0x63C, 0x2B8,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_ATA_DATA6__GPIO_2_6 IOMUX_PAD(0x640, 0x2BC,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_ATA_DATA7__GPIO_2_7 IOMUX_PAD(0x644, 0x2C0,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_ATA_DATA8__GPIO_2_8 IOMUX_PAD(0x648, 0x2C4,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_ATA_DATA9__GPIO_2_9 IOMUX_PAD(0x64C, 0x2C8,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_ATA_DATA10__GPIO_2_10 IOMUX_PAD(0x650, 0x2CC,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_ATA_DATA11__GPIO_2_11 IOMUX_PAD(0x654, 0x2D0,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_ATA_DATA12__GPIO_2_12 IOMUX_PAD(0x658, 0x2D4,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_ATA_DATA13__GPIO_2_13 IOMUX_PAD(0x65C, 0x2D8,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_ATA_DATA14__GPIO_2_14 IOMUX_PAD(0x660, 0x2DC,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_ATA_DATA15__GPIO_2_15 IOMUX_PAD(0x664, 0x2E0,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_NVCC_ATA0__NVCC_ATA0 IOMUX_PAD(0x668, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_SD1_DATA0__GPIO_1_16 IOMUX_PAD(0x66C, 0x2E4,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_SD1_DATA1__GPIO_1_17 IOMUX_PAD(0x670, 0x2E8,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_SD1_CMD__GPIO_1_18 IOMUX_PAD(0x674, 0x2EC,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_SD1_DATA2__GPIO_1_19 IOMUX_PAD(0x678, 0x2F0,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_SD1_CLK__GPIO_1_20 IOMUX_PAD(0x67C, 0x2F4,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_SD1_DATA3__GPIO_1_21 IOMUX_PAD(0x680, 0x2F8,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_NVCC_SD1__NVCC_SD1 IOMUX_PAD(0x684, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_SD2_CLK__GPIO_1_10 IOMUX_PAD(0x688, 0x2FC,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_SD2_CMD__GPIO_1_11 IOMUX_PAD(0x68C, 0x300,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_SD2_DATA3__GPIO_1_12 IOMUX_PAD(0x690, 0x304,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_SD2_DATA2__GPIO_1_13 IOMUX_PAD(0x694, 0x308,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_SD2_DATA1__GPIO_1_14 IOMUX_PAD(0x698, 0x30C,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_SD2_DATA0__GPIO_1_15 IOMUX_PAD(0x69C, 0x310,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_NVCC_SD2__NVCC_SD2 IOMUX_PAD(0x6A0, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_GPIO_0__GPIO_1_0 IOMUX_PAD(0x6A4, 0x314,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_GPIO_1__GPIO_1_1 IOMUX_PAD(0x6A8, 0x318,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_GPIO_9__GPIO_1_9 IOMUX_PAD(0x6AC, 0x31C,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_GPIO_3__GPIO_1_3 IOMUX_PAD(0x6B0, 0x320,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_GPIO_6__GPIO_1_6 IOMUX_PAD(0x6B4, 0x324,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_GPIO_2__GPIO_1_2 IOMUX_PAD(0x6B8, 0x328,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_GPIO_4__GPIO_1_4 IOMUX_PAD(0x6BC, 0x32C,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_GPIO_5__GPIO_1_5 IOMUX_PAD(0x6C0, 0x330,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_GPIO_7__GPIO_1_7 IOMUX_PAD(0x6C4, 0x334,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_GPIO_8__GPIO_1_8 IOMUX_PAD(0x6C8, 0x338,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_GPIO_16__GPIO_7_11 IOMUX_PAD(0x6CC, 0x33C,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_GPIO_17__GPIO_7_12 IOMUX_PAD(0x6D0, 0x340,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_GPIO_18__GPIO_7_13 IOMUX_PAD(0x6D4, 0x344,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_NVCC_GPIO__NVCC_GPIO IOMUX_PAD(0x6D8, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_POR_B__POR_B IOMUX_PAD(0x6DC, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_BOOT_MODE1__BOOT_MODE1 IOMUX_PAD(0x6E0, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_RESET_IN_B__RESET_IN_B IOMUX_PAD(0x6E4, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_BOOT_MODE0__BOOT_MODE0 IOMUX_PAD(0x6E8, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_TEST_MODE__TEST_MODE IOMUX_PAD(0x6EC, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_GRP_ADDDS__GRP_ADDDS IOMUX_PAD(0x6F0, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_GRP_DDRMODE_CTL__GRP_DDRMODE_CTL IOMUX_PAD(0x6F4, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_GRP_DDRPKE__GRP_DDRPKE IOMUX_PAD(0x6FC, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_GRP_DDRPK__GRP_DDRPK IOMUX_PAD(0x708, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_GRP_TERM_CTL3__GRP_TERM_CTL3 IOMUX_PAD(0x70C, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_GRP_DDRHYS__GRP_DDRHYS IOMUX_PAD(0x710, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_GRP_DDRMODE__GRP_DDRMODE IOMUX_PAD(0x714, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_GRP_B0DS__GRP_B0DS IOMUX_PAD(0x718, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_GRP_B1DS__GRP_B1DS IOMUX_PAD(0x71C, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_GRP_CTLDS__GRP_CTLDS IOMUX_PAD(0x720, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_GRP_DDR_TYPE__GRP_DDR_TYPE IOMUX_PAD(0x724, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_GRP_B2DS__GRP_B2DS IOMUX_PAD(0x728, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_GRP_B3DS__GRP_B3DS IOMUX_PAD(0x72C, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) + +#endif /* __MACH_IOMUX_MX53_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/iomux-v3.h b/arch/arm/plat-mxc/include/mach/iomux-v3.h index 0880a4a1aed..2277b01c855 100644 --- a/arch/arm/plat-mxc/include/mach/iomux-v3.h +++ b/arch/arm/plat-mxc/include/mach/iomux-v3.h @@ -42,28 +42,44 @@ * If <padname> or <padmode> refers to a GPIO, it is named * GPIO_<unit>_<num> * - */ - -struct pad_desc { - unsigned mux_ctrl_ofs:12; /* IOMUXC_SW_MUX_CTL_PAD offset */ - unsigned mux_mode:8; - unsigned pad_ctrl_ofs:12; /* IOMUXC_SW_PAD_CTRL offset */ -#define NO_PAD_CTRL (1 << 16) - unsigned pad_ctrl:17; - unsigned select_input_ofs:12; /* IOMUXC_SELECT_INPUT offset */ - unsigned select_input:3; -}; - -#define IOMUX_PAD(_pad_ctrl_ofs, _mux_ctrl_ofs, _mux_mode, _select_input_ofs, \ - _select_input, _pad_ctrl) \ - { \ - .mux_ctrl_ofs = _mux_ctrl_ofs, \ - .mux_mode = _mux_mode, \ - .pad_ctrl_ofs = _pad_ctrl_ofs, \ - .pad_ctrl = _pad_ctrl, \ - .select_input_ofs = _select_input_ofs, \ - .select_input = _select_input, \ - } + * IOMUX/PAD Bit field definitions + * + * MUX_CTRL_OFS: 0..11 (12) + * PAD_CTRL_OFS: 12..23 (12) + * SEL_INPUT_OFS: 24..35 (12) + * MUX_MODE + SION: 36..40 (5) + * PAD_CTRL + NO_PAD_CTRL: 41..57 (17) + * SEL_INP: 58..61 (4) + * reserved: 63 (1) +*/ + +typedef u64 iomux_v3_cfg_t; + +#define MUX_CTRL_OFS_SHIFT 0 +#define MUX_CTRL_OFS_MASK ((iomux_v3_cfg_t)0xfff << MUX_CTRL_OFS_SHIFT) +#define MUX_PAD_CTRL_OFS_SHIFT 12 +#define MUX_PAD_CTRL_OFS_MASK ((iomux_v3_cfg_t)0xfff << MUX_PAD_CTRL_OFS_SHIFT) +#define MUX_SEL_INPUT_OFS_SHIFT 24 +#define MUX_SEL_INPUT_OFS_MASK ((iomux_v3_cfg_t)0xfff << MUX_SEL_INPUT_OFS_SHIFT) + +#define MUX_MODE_SHIFT 36 +#define MUX_MODE_MASK ((iomux_v3_cfg_t)0x1f << MUX_MODE_SHIFT) +#define MUX_PAD_CTRL_SHIFT 41 +#define MUX_PAD_CTRL_MASK ((iomux_v3_cfg_t)0x1ffff << MUX_PAD_CTRL_SHIFT) +#define NO_PAD_CTRL ((iomux_v3_cfg_t)1 << (MUX_PAD_CTRL_SHIFT + 16)) +#define MUX_SEL_INPUT_SHIFT 58 +#define MUX_SEL_INPUT_MASK ((iomux_v3_cfg_t)0xf << MUX_SEL_INPUT_SHIFT) + +#define MUX_PAD_CTRL(x) ((iomux_v3_cfg_t)(x) << MUX_PAD_CTRL_SHIFT) + +#define IOMUX_PAD(_pad_ctrl_ofs, _mux_ctrl_ofs, _mux_mode, _sel_input_ofs, \ + _sel_input, _pad_ctrl) \ + (((iomux_v3_cfg_t)(_mux_ctrl_ofs) << MUX_CTRL_OFS_SHIFT) | \ + ((iomux_v3_cfg_t)(_mux_mode) << MUX_MODE_SHIFT) | \ + ((iomux_v3_cfg_t)(_pad_ctrl_ofs) << MUX_PAD_CTRL_OFS_SHIFT) | \ + ((iomux_v3_cfg_t)(_pad_ctrl) << MUX_PAD_CTRL_SHIFT) | \ + ((iomux_v3_cfg_t)(_sel_input_ofs) << MUX_SEL_INPUT_OFS_SHIFT) | \ + ((iomux_v3_cfg_t)(_sel_input) << MUX_SEL_INPUT_SHIFT)) /* * Use to set PAD control @@ -107,13 +123,13 @@ struct pad_desc { /* * setups a single pad in the iomuxer */ -int mxc_iomux_v3_setup_pad(struct pad_desc *pad); +int mxc_iomux_v3_setup_pad(iomux_v3_cfg_t pad); /* * setups mutliple pads * convenient way to call the above function with tables */ -int mxc_iomux_v3_setup_multiple_pads(struct pad_desc *pad_list, unsigned count); +int mxc_iomux_v3_setup_multiple_pads(iomux_v3_cfg_t *pad_list, unsigned count); /* * Initialise the iomux controller diff --git a/arch/arm/plat-mxc/include/mach/irqs.h b/arch/arm/plat-mxc/include/mach/irqs.h index 86781f7b0c0..58a49cc8379 100644 --- a/arch/arm/plat-mxc/include/mach/irqs.h +++ b/arch/arm/plat-mxc/include/mach/irqs.h @@ -23,13 +23,17 @@ #define MXC_GPIO_IRQ_START MXC_INTERNAL_IRQS /* these are ordered by size to support multi-SoC kernels */ -#if defined CONFIG_ARCH_MX2 +#if defined CONFIG_ARCH_MX53 +#define MXC_GPIO_IRQS (32 * 7) +#elif defined CONFIG_ARCH_MX2 +#define MXC_GPIO_IRQS (32 * 6) +#elif defined CONFIG_ARCH_MX50 #define MXC_GPIO_IRQS (32 * 6) #elif defined CONFIG_ARCH_MX1 #define MXC_GPIO_IRQS (32 * 4) #elif defined CONFIG_ARCH_MX25 #define MXC_GPIO_IRQS (32 * 4) -#elif defined CONFIG_ARCH_MX5 +#elif defined CONFIG_ARCH_MX51 #define MXC_GPIO_IRQS (32 * 4) #elif defined CONFIG_ARCH_MXC91231 #define MXC_GPIO_IRQS (32 * 4) diff --git a/arch/arm/plat-mxc/include/mach/memory.h b/arch/arm/plat-mxc/include/mach/memory.h index 564ec9dbc93..83861408133 100644 --- a/arch/arm/plat-mxc/include/mach/memory.h +++ b/arch/arm/plat-mxc/include/mach/memory.h @@ -16,7 +16,9 @@ #define MX25_PHYS_OFFSET UL(0x80000000) #define MX27_PHYS_OFFSET UL(0xa0000000) #define MX3x_PHYS_OFFSET UL(0x80000000) +#define MX50_PHYS_OFFSET UL(0x70000000) #define MX51_PHYS_OFFSET UL(0x90000000) +#define MX53_PHYS_OFFSET UL(0x70000000) #define MXC91231_PHYS_OFFSET UL(0x90000000) #if !defined(CONFIG_RUNTIME_PHYS_OFFSET) @@ -32,8 +34,12 @@ # define PHYS_OFFSET MX3x_PHYS_OFFSET # elif defined CONFIG_ARCH_MXC91231 # define PHYS_OFFSET MXC91231_PHYS_OFFSET -# elif defined CONFIG_ARCH_MX5 +# elif defined CONFIG_ARCH_MX50 +# define PHYS_OFFSET MX50_PHYS_OFFSET +# elif defined CONFIG_ARCH_MX51 # define PHYS_OFFSET MX51_PHYS_OFFSET +# elif defined CONFIG_ARCH_MX53 +# define PHYS_OFFSET MX53_PHYS_OFFSET # endif #endif diff --git a/arch/arm/plat-mxc/include/mach/mx1.h b/arch/arm/plat-mxc/include/mach/mx1.h index 641b2461823..75d96214b83 100644 --- a/arch/arm/plat-mxc/include/mach/mx1.h +++ b/arch/arm/plat-mxc/include/mach/mx1.h @@ -19,7 +19,6 @@ */ #define MX1_IO_BASE_ADDR 0x00200000 #define MX1_IO_SIZE SZ_1M -#define MX1_IO_BASE_ADDR_VIRT VMALLOC_END #define MX1_CS0_PHYS 0x10000000 #define MX1_CS0_SIZE 0x02000000 @@ -66,6 +65,10 @@ #define MX1_CCM_BASE_ADDR (0x1B000 + MX1_IO_BASE_ADDR) #define MX1_SCM_BASE_ADDR (0x1B804 + MX1_IO_BASE_ADDR) #define MX1_GPIO_BASE_ADDR (0x1C000 + MX1_IO_BASE_ADDR) +#define MX1_GPIO1_BASE_ADDR (0x1C000 + MX1_IO_BASE_ADDR) +#define MX1_GPIO2_BASE_ADDR (0x1C100 + MX1_IO_BASE_ADDR) +#define MX1_GPIO3_BASE_ADDR (0x1C200 + MX1_IO_BASE_ADDR) +#define MX1_GPIO4_BASE_ADDR (0x1C300 + MX1_IO_BASE_ADDR) #define MX1_EIM_BASE_ADDR (0x20000 + MX1_IO_BASE_ADDR) #define MX1_SDRAMC_BASE_ADDR (0x21000 + MX1_IO_BASE_ADDR) #define MX1_MMA_BASE_ADDR (0x22000 + MX1_IO_BASE_ADDR) @@ -73,12 +76,12 @@ #define MX1_CSI_BASE_ADDR (0x24000 + MX1_IO_BASE_ADDR) /* macro to get at IO space when running virtually */ -#define MX1_IO_ADDRESS(x) ( \ - IMX_IO_ADDRESS(x, MX1_IO)) +#define MX1_IO_P2V(x) IMX_IO_P2V(x) +#define MX1_IO_ADDRESS(x) IOMEM(MX1_IO_P2V(x)) /* fixed interrput numbers */ #define MX1_INT_SOFTINT 0 -#define MX1_CSI_INT 6 +#define MX1_INT_CSI 6 #define MX1_DSPA_MAC_INT 7 #define MX1_DSPA_INT 8 #define MX1_COMP_INT 9 @@ -115,13 +118,13 @@ #define MX1_SSI_RX_INT 44 #define MX1_SSI_RX_ERR_INT 45 #define MX1_TOUCH_INT 46 -#define MX1_USBD_INT0 47 -#define MX1_USBD_INT1 48 -#define MX1_USBD_INT2 49 -#define MX1_USBD_INT3 50 -#define MX1_USBD_INT4 51 -#define MX1_USBD_INT5 52 -#define MX1_USBD_INT6 53 +#define MX1_INT_USBD0 47 +#define MX1_INT_USBD1 48 +#define MX1_INT_USBD2 49 +#define MX1_INT_USBD3 50 +#define MX1_INT_USBD4 51 +#define MX1_INT_USBD5 52 +#define MX1_INT_USBD6 53 #define MX1_BTSYS_INT 55 #define MX1_BTTIM_INT 56 #define MX1_BTWUI_INT 57 @@ -164,134 +167,6 @@ * to not break drivers/usb/gadget/imx_udc. Should go * away after this driver uses the new name. */ -#define USBD_INT0 MX1_USBD_INT0 - -#ifdef IMX_NEEDS_DEPRECATED_SYMBOLS -/* these should go away */ -#define IMX_IO_PHYS MX1_IO_BASE_ADDR -#define IMX_IO_SIZE MX1_IO_SIZE -#define IMX_IO_BASE MX1_IO_BASE_ADDR_VIRT -#define IMX_CS0_PHYS MX1_CS0_PHYS -#define IMX_CS0_SIZE MX1_CS0_SIZE -#define IMX_CS1_PHYS MX1_CS1_PHYS -#define IMX_CS1_SIZE MX1_CS1_SIZE -#define IMX_CS2_PHYS MX1_CS2_PHYS -#define IMX_CS2_SIZE MX1_CS2_SIZE -#define IMX_CS3_PHYS MX1_CS3_PHYS -#define IMX_CS3_SIZE MX1_CS3_SIZE -#define IMX_CS4_PHYS MX1_CS4_PHYS -#define IMX_CS4_SIZE MX1_CS4_SIZE -#define IMX_CS5_PHYS MX1_CS5_PHYS -#define IMX_CS5_SIZE MX1_CS5_SIZE -#define AIPI1_BASE_ADDR MX1_AIPI1_BASE_ADDR -#define WDT_BASE_ADDR MX1_WDT_BASE_ADDR -#define TIM1_BASE_ADDR MX1_TIM1_BASE_ADDR -#define TIM2_BASE_ADDR MX1_TIM2_BASE_ADDR -#define RTC_BASE_ADDR MX1_RTC_BASE_ADDR -#define LCDC_BASE_ADDR MX1_LCDC_BASE_ADDR -#define UART1_BASE_ADDR MX1_UART1_BASE_ADDR -#define UART2_BASE_ADDR MX1_UART2_BASE_ADDR -#define PWM_BASE_ADDR MX1_PWM_BASE_ADDR -#define DMA_BASE_ADDR MX1_DMA_BASE_ADDR -#define AIPI2_BASE_ADDR MX1_AIPI2_BASE_ADDR -#define SIM_BASE_ADDR MX1_SIM_BASE_ADDR -#define USBD_BASE_ADDR MX1_USBD_BASE_ADDR -#define SPI1_BASE_ADDR MX1_SPI1_BASE_ADDR -#define MMC_BASE_ADDR MX1_MMC_BASE_ADDR -#define ASP_BASE_ADDR MX1_ASP_BASE_ADDR -#define BTA_BASE_ADDR MX1_BTA_BASE_ADDR -#define I2C_BASE_ADDR MX1_I2C_BASE_ADDR -#define SSI_BASE_ADDR MX1_SSI_BASE_ADDR -#define SPI2_BASE_ADDR MX1_SPI2_BASE_ADDR -#define MSHC_BASE_ADDR MX1_MSHC_BASE_ADDR -#define CCM_BASE_ADDR MX1_CCM_BASE_ADDR -#define SCM_BASE_ADDR MX1_SCM_BASE_ADDR -#define GPIO_BASE_ADDR MX1_GPIO_BASE_ADDR -#define EIM_BASE_ADDR MX1_EIM_BASE_ADDR -#define SDRAMC_BASE_ADDR MX1_SDRAMC_BASE_ADDR -#define MMA_BASE_ADDR MX1_MMA_BASE_ADDR -#define AVIC_BASE_ADDR MX1_AVIC_BASE_ADDR -#define CSI_BASE_ADDR MX1_CSI_BASE_ADDR -#define IO_ADDRESS(x) MX1_IO_ADDRESS(x) -#define AVIC_IO_ADDRESS(x) IO_ADDRESS(x) -#define INT_SOFTINT MX1_INT_SOFTINT -#define CSI_INT MX1_CSI_INT -#define DSPA_MAC_INT MX1_DSPA_MAC_INT -#define DSPA_INT MX1_DSPA_INT -#define COMP_INT MX1_COMP_INT -#define MSHC_XINT MX1_MSHC_XINT -#define GPIO_INT_PORTA MX1_GPIO_INT_PORTA -#define GPIO_INT_PORTB MX1_GPIO_INT_PORTB -#define GPIO_INT_PORTC MX1_GPIO_INT_PORTC -#define LCDC_INT MX1_LCDC_INT -#define SIM_INT MX1_SIM_INT -#define SIM_DATA_INT MX1_SIM_DATA_INT -#define RTC_INT MX1_RTC_INT -#define RTC_SAMINT MX1_RTC_SAMINT -#define UART2_MINT_PFERR MX1_UART2_MINT_PFERR -#define UART2_MINT_RTS MX1_UART2_MINT_RTS -#define UART2_MINT_DTR MX1_UART2_MINT_DTR -#define UART2_MINT_UARTC MX1_UART2_MINT_UARTC -#define UART2_MINT_TX MX1_UART2_MINT_TX -#define UART2_MINT_RX MX1_UART2_MINT_RX -#define UART1_MINT_PFERR MX1_UART1_MINT_PFERR -#define UART1_MINT_RTS MX1_UART1_MINT_RTS -#define UART1_MINT_DTR MX1_UART1_MINT_DTR -#define UART1_MINT_UARTC MX1_UART1_MINT_UARTC -#define UART1_MINT_TX MX1_UART1_MINT_TX -#define UART1_MINT_RX MX1_UART1_MINT_RX -#define VOICE_DAC_INT MX1_VOICE_DAC_INT -#define VOICE_ADC_INT MX1_VOICE_ADC_INT -#define PEN_DATA_INT MX1_PEN_DATA_INT -#define PWM_INT MX1_PWM_INT -#define SDHC_INT MX1_SDHC_INT -#define I2C_INT MX1_INT_I2C -#define CSPI_INT MX1_CSPI_INT -#define SSI_TX_INT MX1_SSI_TX_INT -#define SSI_TX_ERR_INT MX1_SSI_TX_ERR_INT -#define SSI_RX_INT MX1_SSI_RX_INT -#define SSI_RX_ERR_INT MX1_SSI_RX_ERR_INT -#define TOUCH_INT MX1_TOUCH_INT -#define USBD_INT1 MX1_USBD_INT1 -#define USBD_INT2 MX1_USBD_INT2 -#define USBD_INT3 MX1_USBD_INT3 -#define USBD_INT4 MX1_USBD_INT4 -#define USBD_INT5 MX1_USBD_INT5 -#define USBD_INT6 MX1_USBD_INT6 -#define BTSYS_INT MX1_BTSYS_INT -#define BTTIM_INT MX1_BTTIM_INT -#define BTWUI_INT MX1_BTWUI_INT -#define TIM2_INT MX1_TIM2_INT -#define TIM1_INT MX1_TIM1_INT -#define DMA_ERR MX1_DMA_ERR -#define DMA_INT MX1_DMA_INT -#define GPIO_INT_PORTD MX1_GPIO_INT_PORTD -#define WDT_INT MX1_WDT_INT -#define DMA_REQ_UART3_T MX1_DMA_REQ_UART3_T -#define DMA_REQ_UART3_R MX1_DMA_REQ_UART3_R -#define DMA_REQ_SSI2_T MX1_DMA_REQ_SSI2_T -#define DMA_REQ_SSI2_R MX1_DMA_REQ_SSI2_R -#define DMA_REQ_CSI_STAT MX1_DMA_REQ_CSI_STAT -#define DMA_REQ_CSI_R MX1_DMA_REQ_CSI_R -#define DMA_REQ_MSHC MX1_DMA_REQ_MSHC -#define DMA_REQ_DSPA_DCT_DOUT MX1_DMA_REQ_DSPA_DCT_DOUT -#define DMA_REQ_DSPA_DCT_DIN MX1_DMA_REQ_DSPA_DCT_DIN -#define DMA_REQ_DSPA_MAC MX1_DMA_REQ_DSPA_MAC -#define DMA_REQ_EXT MX1_DMA_REQ_EXT -#define DMA_REQ_SDHC MX1_DMA_REQ_SDHC -#define DMA_REQ_SPI1_R MX1_DMA_REQ_SPI1_R -#define DMA_REQ_SPI1_T MX1_DMA_REQ_SPI1_T -#define DMA_REQ_SSI_T MX1_DMA_REQ_SSI_T -#define DMA_REQ_SSI_R MX1_DMA_REQ_SSI_R -#define DMA_REQ_ASP_DAC MX1_DMA_REQ_ASP_DAC -#define DMA_REQ_ASP_ADC MX1_DMA_REQ_ASP_ADC -#define DMA_REQ_USP_EP(x) MX1_DMA_REQ_USP_EP(x) -#define DMA_REQ_SPI2_R MX1_DMA_REQ_SPI2_R -#define DMA_REQ_SPI2_T MX1_DMA_REQ_SPI2_T -#define DMA_REQ_UART2_T MX1_DMA_REQ_UART2_T -#define DMA_REQ_UART2_R MX1_DMA_REQ_UART2_R -#define DMA_REQ_UART1_T MX1_DMA_REQ_UART1_T -#define DMA_REQ_UART1_R MX1_DMA_REQ_UART1_R -#endif /* ifdef IMX_NEEDS_DEPRECATED_SYMBOLS */ +#define USBD_INT0 MX1_INT_USBD0 #endif /* ifndef __MACH_MX1_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/mx21.h b/arch/arm/plat-mxc/include/mach/mx21.h index 8bc59720b6e..6cd049ebbd8 100644 --- a/arch/arm/plat-mxc/include/mach/mx21.h +++ b/arch/arm/plat-mxc/include/mach/mx21.h @@ -26,7 +26,6 @@ #define __MACH_MX21_H__ #define MX21_AIPI_BASE_ADDR 0x10000000 -#define MX21_AIPI_BASE_ADDR_VIRT 0xf4000000 #define MX21_AIPI_SIZE SZ_1M #define MX21_DMA_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x01000) #define MX21_WDOG_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x02000) @@ -49,6 +48,12 @@ #define MX21_SDHC1_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x13000) #define MX21_SDHC2_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x14000) #define MX21_GPIO_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x15000) +#define MX21_GPIO1_BASE_ADDR (MX21_GPIO_BASE_ADDR + 0x000) +#define MX21_GPIO2_BASE_ADDR (MX21_GPIO_BASE_ADDR + 0x100) +#define MX21_GPIO3_BASE_ADDR (MX21_GPIO_BASE_ADDR + 0x200) +#define MX21_GPIO4_BASE_ADDR (MX21_GPIO_BASE_ADDR + 0x300) +#define MX21_GPIO5_BASE_ADDR (MX21_GPIO_BASE_ADDR + 0x400) +#define MX21_GPIO6_BASE_ADDR (MX21_GPIO_BASE_ADDR + 0x500) #define MX21_AUDMUX_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x16000) #define MX21_CSPI3_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x17000) #define MX21_LCDC_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x21000) @@ -64,7 +69,6 @@ #define MX21_AVIC_BASE_ADDR 0x10040000 #define MX21_SAHB1_BASE_ADDR 0x80000000 -#define MX21_SAHB1_BASE_ADDR_VIRT 0xf4100000 #define MX21_SAHB1_SIZE SZ_1M #define MX21_CSI_BASE_ADDR (MX2x_SAHB1_BASE_ADDR + 0x0000) @@ -82,7 +86,6 @@ /* NAND, SDRAM, WEIM etc controllers */ #define MX21_X_MEMC_BASE_ADDR 0xdf000000 -#define MX21_X_MEMC_BASE_ADDR_VIRT 0xf4200000 #define MX21_X_MEMC_SIZE SZ_256K #define MX21_SDRAMC_BASE_ADDR (MX21_X_MEMC_BASE_ADDR + 0x0000) @@ -92,10 +95,8 @@ #define MX21_IRAM_BASE_ADDR 0xffffe800 /* internal ram */ -#define MX21_IO_ADDRESS(x) ( \ - IMX_IO_ADDRESS(x, MX21_AIPI) ?: \ - IMX_IO_ADDRESS(x, MX21_SAHB1) ?: \ - IMX_IO_ADDRESS(x, MX21_X_MEMC)) +#define MX21_IO_P2V(x) IMX_IO_P2V(x) +#define MX21_IO_ADDRESS(x) IOMEM(MX21_IO_P2V(x)) /* fixed interrupt numbers */ #define MX21_INT_CSPI3 6 @@ -184,39 +185,4 @@ #define MX21_DMA_REQ_CSI_STAT 30 #define MX21_DMA_REQ_CSI_RX 31 -#ifdef IMX_NEEDS_DEPRECATED_SYMBOLS -/* these should go away */ -#define SDRAM_BASE_ADDR MX21_SDRAM_BASE_ADDR -#define CSD1_BASE_ADDR MX21_CSD1_BASE_ADDR -#define CS0_BASE_ADDR MX21_CS0_BASE_ADDR -#define CS1_BASE_ADDR MX21_CS1_BASE_ADDR -#define CS2_BASE_ADDR MX21_CS2_BASE_ADDR -#define CS3_BASE_ADDR MX21_CS3_BASE_ADDR -#define CS4_BASE_ADDR MX21_CS4_BASE_ADDR -#define PCMCIA_MEM_BASE_ADDR MX21_PCMCIA_MEM_BASE_ADDR -#define CS5_BASE_ADDR MX21_CS5_BASE_ADDR -#define X_MEMC_BASE_ADDR MX21_X_MEMC_BASE_ADDR -#define X_MEMC_BASE_ADDR_VIRT MX21_X_MEMC_BASE_ADDR_VIRT -#define X_MEMC_SIZE MX21_X_MEMC_SIZE -#define SDRAMC_BASE_ADDR MX21_SDRAMC_BASE_ADDR -#define EIM_BASE_ADDR MX21_EIM_BASE_ADDR -#define PCMCIA_CTL_BASE_ADDR MX21_PCMCIA_CTL_BASE_ADDR -#define NFC_BASE_ADDR MX21_NFC_BASE_ADDR -#define IRAM_BASE_ADDR MX21_IRAM_BASE_ADDR -#define MXC_INT_FIRI MX21_INT_FIRI -#define MXC_INT_BMI MX21_INT_BMI -#define MXC_INT_EMMAENC MX21_INT_EMMAENC -#define MXC_INT_EMMADEC MX21_INT_EMMADEC -#define MXC_INT_USBWKUP MX21_INT_USBWKUP -#define MXC_INT_USBDMA MX21_INT_USBDMA -#define MXC_INT_USBHOST MX21_INT_USBHOST -#define MXC_INT_USBFUNC MX21_INT_USBFUNC -#define MXC_INT_USBMNP MX21_INT_USBMNP -#define MXC_INT_USBCTRL MX21_INT_USBCTRL -#define MXC_INT_USBCTRL MX21_INT_USBCTRL -#define DMA_REQ_FIRI_RX MX21_DMA_REQ_FIRI_RX -#define DMA_REQ_BMI_TX MX21_DMA_REQ_BMI_TX -#define DMA_REQ_BMI_RX MX21_DMA_REQ_BMI_RX -#endif - #endif /* ifndef __MACH_MX21_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/mx25.h b/arch/arm/plat-mxc/include/mach/mx25.h index cf46a45b0d4..087cd7ac8d5 100644 --- a/arch/arm/plat-mxc/include/mach/mx25.h +++ b/arch/arm/plat-mxc/include/mach/mx25.h @@ -2,13 +2,10 @@ #define __MACH_MX25_H__ #define MX25_AIPS1_BASE_ADDR 0x43f00000 -#define MX25_AIPS1_BASE_ADDR_VIRT 0xfc000000 #define MX25_AIPS1_SIZE SZ_1M #define MX25_AIPS2_BASE_ADDR 0x53f00000 -#define MX25_AIPS2_BASE_ADDR_VIRT 0xfc200000 #define MX25_AIPS2_SIZE SZ_1M #define MX25_AVIC_BASE_ADDR 0x68000000 -#define MX25_AVIC_BASE_ADDR_VIRT 0xfc400000 #define MX25_AVIC_SIZE SZ_1M #define MX25_I2C1_BASE_ADDR (MX25_AIPS1_BASE_ADDR + 0x80000) @@ -21,20 +18,15 @@ #define MX25_CRM_BASE_ADDR (MX25_AIPS2_BASE_ADDR + 0x80000) #define MX25_GPT1_BASE_ADDR (MX25_AIPS2_BASE_ADDR + 0x90000) +#define MX25_GPIO4_BASE_ADDR (MX25_AIPS2_BASE_ADDR + 0x9c000) +#define MX25_PWM2_BASE_ADDR (MX25_AIPS2_BASE_ADDR + 0xa0000) +#define MX25_GPIO3_BASE_ADDR (MX25_AIPS2_BASE_ADDR + 0xa4000) +#define MX25_PWM3_BASE_ADDR (MX25_AIPS2_BASE_ADDR + 0xa8000) +#define MX25_PWM4_BASE_ADDR (MX25_AIPS2_BASE_ADDR + 0xc8000) +#define MX25_GPIO1_BASE_ADDR (MX25_AIPS2_BASE_ADDR + 0xcc000) +#define MX25_GPIO2_BASE_ADDR (MX25_AIPS2_BASE_ADDR + 0xd0000) #define MX25_WDOG_BASE_ADDR (MX25_AIPS2_BASE_ADDR + 0xdc000) - -#define MX25_GPIO1_BASE_ADDR_VIRT (MX25_AIPS2_BASE_ADDR_VIRT + 0xcc000) -#define MX25_GPIO2_BASE_ADDR_VIRT (MX25_AIPS2_BASE_ADDR_VIRT + 0xd0000) -#define MX25_GPIO3_BASE_ADDR_VIRT (MX25_AIPS2_BASE_ADDR_VIRT + 0xa4000) -#define MX25_GPIO4_BASE_ADDR_VIRT (MX25_AIPS2_BASE_ADDR_VIRT + 0x9c000) - -#define MX25_IO_ADDRESS(x) ( \ - IMX_IO_ADDRESS(x, MX25_AIPS1) ?: \ - IMX_IO_ADDRESS(x, MX25_AIPS2) ?: \ - IMX_IO_ADDRESS(x, MX25_AVIC)) - -#define MX25_AIPS1_IO_ADDRESS(x) \ - (((x) - MX25_AIPS1_BASE_ADDR) + MX25_AIPS1_BASE_ADDR_VIRT) +#define MX25_PWM1_BASE_ADDR (MX25_AIPS2_BASE_ADDR + 0xe0000) #define MX25_UART1_BASE_ADDR 0x43f90000 #define MX25_UART2_BASE_ADDR 0x43f94000 @@ -55,9 +47,19 @@ #define MX25_LCDC_BASE_ADDR 0x53fbc000 #define MX25_KPP_BASE_ADDR 0x43fa8000 #define MX25_SDMA_BASE_ADDR 0x53fd4000 -#define MX25_OTG_BASE_ADDR 0x53ff4000 +#define MX25_USB_BASE_ADDR 0x53ff4000 +#define MX25_USB_OTG_BASE_ADDR (MX25_USB_BASE_ADDR + 0x0000) +/* + * The reference manual (IMX25RM, Rev. 1, 06/2009) specifies an offset of 0x200 + * for the host controller. Early documentation drafts specified 0x400 and + * Freescale internal sources confirm only the latter value to work. + */ +#define MX25_USB_HS_BASE_ADDR (MX25_USB_BASE_ADDR + 0x0400) #define MX25_CSI_BASE_ADDR 0x53ff8000 +#define MX25_IO_P2V(x) IMX_IO_P2V(x) +#define MX25_IO_ADDRESS(x) IOMEM(MX25_IO_P2V(x)) + #define MX25_INT_CSPI3 0 #define MX25_INT_I2C1 3 #define MX25_INT_I2C2 4 @@ -69,18 +71,28 @@ #define MX25_INT_SSI1 12 #define MX25_INT_CSPI2 13 #define MX25_INT_CSPI1 14 +#define MX25_INT_GPIO3 16 #define MX25_INT_CSI 17 #define MX25_INT_UART3 18 +#define MX25_INT_GPIO4 23 #define MX25_INT_KPP 24 #define MX25_INT_DRYICE 25 +#define MX25_INT_PWM1 26 #define MX25_INT_UART2 32 #define MX25_INT_NFC 33 #define MX25_INT_SDMA 34 +#define MX25_INT_USB_HS 35 +#define MX25_INT_PWM2 36 +#define MX25_INT_USB_OTG 37 #define MX25_INT_LCDC 39 #define MX25_INT_UART5 40 +#define MX25_INT_PWM3 41 +#define MX25_INT_PWM4 42 #define MX25_INT_CAN1 43 #define MX25_INT_CAN2 44 #define MX25_INT_UART1 45 +#define MX25_INT_GPIO2 51 +#define MX25_INT_GPIO1 52 #define MX25_INT_FEC 57 #define MX25_DMA_REQ_SSI2_RX1 22 diff --git a/arch/arm/plat-mxc/include/mach/mx27.h b/arch/arm/plat-mxc/include/mach/mx27.h index 2237ba2e535..cbc43ad5ef4 100644 --- a/arch/arm/plat-mxc/include/mach/mx27.h +++ b/arch/arm/plat-mxc/include/mach/mx27.h @@ -29,7 +29,6 @@ #endif #define MX27_AIPI_BASE_ADDR 0x10000000 -#define MX27_AIPI_BASE_ADDR_VIRT 0xf4000000 #define MX27_AIPI_SIZE SZ_1M #define MX27_DMA_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x01000) #define MX27_WDOG_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x02000) @@ -52,6 +51,12 @@ #define MX27_SDHC1_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x13000) #define MX27_SDHC2_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x14000) #define MX27_GPIO_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x15000) +#define MX27_GPIO1_BASE_ADDR (MX27_GPIO_BASE_ADDR + 0x000) +#define MX27_GPIO2_BASE_ADDR (MX27_GPIO_BASE_ADDR + 0x100) +#define MX27_GPIO3_BASE_ADDR (MX27_GPIO_BASE_ADDR + 0x200) +#define MX27_GPIO4_BASE_ADDR (MX27_GPIO_BASE_ADDR + 0x300) +#define MX27_GPIO5_BASE_ADDR (MX27_GPIO_BASE_ADDR + 0x400) +#define MX27_GPIO6_BASE_ADDR (MX27_GPIO_BASE_ADDR + 0x500) #define MX27_AUDMUX_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x16000) #define MX27_CSPI3_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x17000) #define MX27_MSHC_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x18000) @@ -65,11 +70,13 @@ #define MX27_LCDC_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x21000) #define MX27_SLCDC_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x22000) #define MX27_VPU_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x23000) -#define MX27_USBOTG_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x24000) -#define MX27_OTG_BASE_ADDR MX27_USBOTG_BASE_ADDR +#define MX27_USB_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x24000) +#define MX27_USB_OTG_BASE_ADDR (MX27_USB_BASE_ADDR + 0x0000) +#define MX27_USB_HS1_BASE_ADDR (MX27_USB_BASE_ADDR + 0x0200) +#define MX27_USB_HS2_BASE_ADDR (MX27_USB_BASE_ADDR + 0x0400) #define MX27_SAHARA_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x25000) -#define MX27_EMMA_PP_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x26000) -#define MX27_EMMA_PRP_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x26400) +#define MX27_EMMAPP_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x26000) +#define MX27_EMMAPRP_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x26400) #define MX27_CCM_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x27000) #define MX27_SYSCTRL_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x27800) #define MX27_IIM_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x28000) @@ -87,7 +94,6 @@ #define MX27_ROMP_BASE_ADDR 0x10041000 #define MX27_SAHB1_BASE_ADDR 0x80000000 -#define MX27_SAHB1_BASE_ADDR_VIRT 0xf4100000 #define MX27_SAHB1_SIZE SZ_1M #define MX27_CSI_BASE_ADDR (MX27_SAHB1_BASE_ADDR + 0x0000) #define MX27_ATA_BASE_ADDR (MX27_SAHB1_BASE_ADDR + 0x1000) @@ -105,7 +111,6 @@ /* NAND, SDRAM, WEIM, M3IF, EMI controllers */ #define MX27_X_MEMC_BASE_ADDR 0xd8000000 -#define MX27_X_MEMC_BASE_ADDR_VIRT 0xf4200000 #define MX27_X_MEMC_SIZE SZ_1M #define MX27_NFC_BASE_ADDR (MX27_X_MEMC_BASE_ADDR) #define MX27_SDRAMC_BASE_ADDR (MX27_X_MEMC_BASE_ADDR + 0x1000) @@ -123,10 +128,8 @@ /* IRAM */ #define MX27_IRAM_BASE_ADDR 0xffff4c00 /* internal ram */ -#define MX27_IO_ADDRESS(x) ( \ - IMX_IO_ADDRESS(x, MX27_AIPI) ?: \ - IMX_IO_ADDRESS(x, MX27_SAHB1) ?: \ - IMX_IO_ADDRESS(x, MX27_X_MEMC)) +#define MX27_IO_P2V(x) IMX_IO_P2V(x) +#define MX27_IO_ADDRESS(x) IOMEM(MX27_IO_P2V(x)) #ifndef __ASSEMBLER__ static inline void mx27_setup_weimcs(size_t cs, @@ -192,9 +195,9 @@ static inline void mx27_setup_weimcs(size_t cs, #define MX27_INT_EMMAPRP 51 #define MX27_INT_EMMAPP 52 #define MX27_INT_VPU 53 -#define MX27_INT_USB1 54 -#define MX27_INT_USB2 55 -#define MX27_INT_USB3 56 +#define MX27_INT_USB_HS1 54 +#define MX27_INT_USB_HS2 55 +#define MX27_INT_USB_OTG 56 #define MX27_INT_SCC_SMN 57 #define MX27_INT_SCC_SCM 58 #define MX27_INT_SAHARA 59 @@ -241,82 +244,8 @@ static inline void mx27_setup_weimcs(size_t cs, #define MX27_DMA_REQ_SDHC3 36 #define MX27_DMA_REQ_NFC 37 -/* silicon revisions specific to i.MX27 */ -#define CHIP_REV_1_0 0x00 -#define CHIP_REV_2_0 0x01 - #ifndef __ASSEMBLY__ extern int mx27_revision(void); #endif -#ifdef IMX_NEEDS_DEPRECATED_SYMBOLS -/* these should go away */ -#define MSHC_BASE_ADDR MX27_MSHC_BASE_ADDR -#define GPT5_BASE_ADDR MX27_GPT5_BASE_ADDR -#define GPT4_BASE_ADDR MX27_GPT4_BASE_ADDR -#define UART5_BASE_ADDR MX27_UART5_BASE_ADDR -#define UART6_BASE_ADDR MX27_UART6_BASE_ADDR -#define I2C2_BASE_ADDR MX27_I2C2_BASE_ADDR -#define SDHC3_BASE_ADDR MX27_SDHC3_BASE_ADDR -#define GPT6_BASE_ADDR MX27_GPT6_BASE_ADDR -#define VPU_BASE_ADDR MX27_VPU_BASE_ADDR -#define OTG_BASE_ADDR MX27_OTG_BASE_ADDR -#define SAHARA_BASE_ADDR MX27_SAHARA_BASE_ADDR -#define IIM_BASE_ADDR MX27_IIM_BASE_ADDR -#define RTIC_BASE_ADDR MX27_RTIC_BASE_ADDR -#define FEC_BASE_ADDR MX27_FEC_BASE_ADDR -#define SCC_BASE_ADDR MX27_SCC_BASE_ADDR -#define ETB_BASE_ADDR MX27_ETB_BASE_ADDR -#define ETB_RAM_BASE_ADDR MX27_ETB_RAM_BASE_ADDR -#define ROMP_BASE_ADDR MX27_ROMP_BASE_ADDR -#define ATA_BASE_ADDR MX27_ATA_BASE_ADDR -#define SDRAM_BASE_ADDR MX27_SDRAM_BASE_ADDR -#define CSD1_BASE_ADDR MX27_CSD1_BASE_ADDR -#define CS0_BASE_ADDR MX27_CS0_BASE_ADDR -#define CS1_BASE_ADDR MX27_CS1_BASE_ADDR -#define CS2_BASE_ADDR MX27_CS2_BASE_ADDR -#define CS3_BASE_ADDR MX27_CS3_BASE_ADDR -#define CS4_BASE_ADDR MX27_CS4_BASE_ADDR -#define CS5_BASE_ADDR MX27_CS5_BASE_ADDR -#define X_MEMC_BASE_ADDR MX27_X_MEMC_BASE_ADDR -#define X_MEMC_BASE_ADDR_VIRT MX27_X_MEMC_BASE_ADDR_VIRT -#define X_MEMC_SIZE MX27_X_MEMC_SIZE -#define NFC_BASE_ADDR MX27_NFC_BASE_ADDR -#define SDRAMC_BASE_ADDR MX27_SDRAMC_BASE_ADDR -#define WEIM_BASE_ADDR MX27_WEIM_BASE_ADDR -#define M3IF_BASE_ADDR MX27_M3IF_BASE_ADDR -#define PCMCIA_CTL_BASE_ADDR MX27_PCMCIA_CTL_BASE_ADDR -#define PCMCIA_MEM_BASE_ADDR MX27_PCMCIA_MEM_BASE_ADDR -#define IRAM_BASE_ADDR MX27_IRAM_BASE_ADDR -#define MXC_INT_I2C2 MX27_INT_I2C2 -#define MXC_INT_GPT6 MX27_INT_GPT6 -#define MXC_INT_GPT5 MX27_INT_GPT5 -#define MXC_INT_GPT4 MX27_INT_GPT4 -#define MXC_INT_RTIC MX27_INT_RTIC -#define MXC_INT_SDHC MX27_INT_SDHC -#define MXC_INT_SDHC3 MX27_INT_SDHC3 -#define MXC_INT_ATA MX27_INT_ATA -#define MXC_INT_UART6 MX27_INT_UART6 -#define MXC_INT_UART5 MX27_INT_UART5 -#define MXC_INT_FEC MX27_INT_FEC -#define MXC_INT_VPU MX27_INT_VPU -#define MXC_INT_USB1 MX27_INT_USB1 -#define MXC_INT_USB2 MX27_INT_USB2 -#define MXC_INT_USB3 MX27_INT_USB3 -#define MXC_INT_SCC_SMN MX27_INT_SCC_SMN -#define MXC_INT_SCC_SCM MX27_INT_SCC_SCM -#define MXC_INT_SAHARA MX27_INT_SAHARA -#define MXC_INT_IIM MX27_INT_IIM -#define MXC_INT_CCM MX27_INT_CCM -#define DMA_REQ_MSHC MX27_DMA_REQ_MSHC -#define DMA_REQ_ATA_TX MX27_DMA_REQ_ATA_TX -#define DMA_REQ_ATA_RCV MX27_DMA_REQ_ATA_RCV -#define DMA_REQ_UART5_TX MX27_DMA_REQ_UART5_TX -#define DMA_REQ_UART5_RX MX27_DMA_REQ_UART5_RX -#define DMA_REQ_UART6_TX MX27_DMA_REQ_UART6_TX -#define DMA_REQ_UART6_RX MX27_DMA_REQ_UART6_RX -#define DMA_REQ_SDHC3 MX27_DMA_REQ_SDHC3 -#define DMA_REQ_NFC MX27_DMA_REQ_NFC -#endif - #endif /* ifndef __MACH_MX27_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/mx2x.h b/arch/arm/plat-mxc/include/mach/mx2x.h index afb895a0b5b..6d07839fdec 100644 --- a/arch/arm/plat-mxc/include/mach/mx2x.h +++ b/arch/arm/plat-mxc/include/mach/mx2x.h @@ -27,7 +27,6 @@ /* Register offsets */ #define MX2x_AIPI_BASE_ADDR 0x10000000 -#define MX2x_AIPI_BASE_ADDR_VIRT 0xf4000000 #define MX2x_AIPI_SIZE SZ_1M #define MX2x_DMA_BASE_ADDR (MX2x_AIPI_BASE_ADDR + 0x01000) #define MX2x_WDOG_BASE_ADDR (MX2x_AIPI_BASE_ADDR + 0x02000) @@ -65,43 +64,9 @@ #define MX2x_AVIC_BASE_ADDR 0x10040000 #define MX2x_SAHB1_BASE_ADDR 0x80000000 -#define MX2x_SAHB1_BASE_ADDR_VIRT 0xf4100000 #define MX2x_SAHB1_SIZE SZ_1M #define MX2x_CSI_BASE_ADDR (MX2x_SAHB1_BASE_ADDR + 0x0000) -/* - * This macro defines the physical to virtual address mapping for all the - * peripheral modules. It is used by passing in the physical address as x - * and returning the virtual address. If the physical address is not mapped, - * it returns 0xDEADBEEF - */ -#define IO_ADDRESS(x) \ - (void __force __iomem *) \ - (((x >= AIPI_BASE_ADDR) && (x < (AIPI_BASE_ADDR + AIPI_SIZE))) ? \ - AIPI_IO_ADDRESS(x) : \ - ((x >= SAHB1_BASE_ADDR) && (x < (SAHB1_BASE_ADDR + SAHB1_SIZE))) ? \ - SAHB1_IO_ADDRESS(x) : \ - ((x >= X_MEMC_BASE_ADDR) && (x < (X_MEMC_BASE_ADDR + X_MEMC_SIZE))) ? \ - X_MEMC_IO_ADDRESS(x) : 0xDEADBEEF) - -/* define the address mapping macros: in physical address order */ -#define AIPI_IO_ADDRESS(x) \ - (((x) - AIPI_BASE_ADDR) + AIPI_BASE_ADDR_VIRT) - -#define AVIC_IO_ADDRESS(x) AIPI_IO_ADDRESS(x) - -#define SAHB1_IO_ADDRESS(x) \ - (((x) - SAHB1_BASE_ADDR) + SAHB1_BASE_ADDR_VIRT) - -#define CS4_IO_ADDRESS(x) \ - (((x) - CS4_BASE_ADDR) + CS4_BASE_ADDR_VIRT) - -#define X_MEMC_IO_ADDRESS(x) \ - (((x) - X_MEMC_BASE_ADDR) + X_MEMC_BASE_ADDR_VIRT) - -#define PCMCIA_IO_ADDRESS(x) \ - (((x) - X_MEMC_BASE_ADDR) + X_MEMC_BASE_ADDR_VIRT) - /* fixed interrupt numbers */ #define MX2x_INT_CSPI3 6 #define MX2x_INT_GPIO 8 @@ -176,118 +141,4 @@ #define MX2x_DMA_REQ_CSI_STAT 30 #define MX2x_DMA_REQ_CSI_RX 31 -#ifdef IMX_NEEDS_DEPRECATED_SYMBOLS -/* these should go away */ -#define AIPI_BASE_ADDR MX2x_AIPI_BASE_ADDR -#define AIPI_BASE_ADDR_VIRT MX2x_AIPI_BASE_ADDR_VIRT -#define AIPI_SIZE MX2x_AIPI_SIZE -#define DMA_BASE_ADDR MX2x_DMA_BASE_ADDR -#define WDOG_BASE_ADDR MX2x_WDOG_BASE_ADDR -#define GPT1_BASE_ADDR MX2x_GPT1_BASE_ADDR -#define GPT2_BASE_ADDR MX2x_GPT2_BASE_ADDR -#define GPT3_BASE_ADDR MX2x_GPT3_BASE_ADDR -#define PWM_BASE_ADDR MX2x_PWM_BASE_ADDR -#define RTC_BASE_ADDR MX2x_RTC_BASE_ADDR -#define KPP_BASE_ADDR MX2x_KPP_BASE_ADDR -#define OWIRE_BASE_ADDR MX2x_OWIRE_BASE_ADDR -#define UART1_BASE_ADDR MX2x_UART1_BASE_ADDR -#define UART2_BASE_ADDR MX2x_UART2_BASE_ADDR -#define UART3_BASE_ADDR MX2x_UART3_BASE_ADDR -#define UART4_BASE_ADDR MX2x_UART4_BASE_ADDR -#define CSPI1_BASE_ADDR MX2x_CSPI1_BASE_ADDR -#define CSPI2_BASE_ADDR MX2x_CSPI2_BASE_ADDR -#define SSI1_BASE_ADDR MX2x_SSI1_BASE_ADDR -#define SSI2_BASE_ADDR MX2x_SSI2_BASE_ADDR -#define I2C_BASE_ADDR MX2x_I2C_BASE_ADDR -#define SDHC1_BASE_ADDR MX2x_SDHC1_BASE_ADDR -#define SDHC2_BASE_ADDR MX2x_SDHC2_BASE_ADDR -#define GPIO_BASE_ADDR MX2x_GPIO_BASE_ADDR -#define AUDMUX_BASE_ADDR MX2x_AUDMUX_BASE_ADDR -#define CSPI3_BASE_ADDR MX2x_CSPI3_BASE_ADDR -#define LCDC_BASE_ADDR MX2x_LCDC_BASE_ADDR -#define SLCDC_BASE_ADDR MX2x_SLCDC_BASE_ADDR -#define USBOTG_BASE_ADDR MX2x_USBOTG_BASE_ADDR -#define EMMA_PP_BASE_ADDR MX2x_EMMA_PP_BASE_ADDR -#define EMMA_PRP_BASE_ADDR MX2x_EMMA_PRP_BASE_ADDR -#define CCM_BASE_ADDR MX2x_CCM_BASE_ADDR -#define SYSCTRL_BASE_ADDR MX2x_SYSCTRL_BASE_ADDR -#define JAM_BASE_ADDR MX2x_JAM_BASE_ADDR -#define MAX_BASE_ADDR MX2x_MAX_BASE_ADDR -#define AVIC_BASE_ADDR MX2x_AVIC_BASE_ADDR -#define SAHB1_BASE_ADDR MX2x_SAHB1_BASE_ADDR -#define SAHB1_BASE_ADDR_VIRT MX2x_SAHB1_BASE_ADDR_VIRT -#define SAHB1_SIZE MX2x_SAHB1_SIZE -#define CSI_BASE_ADDR MX2x_CSI_BASE_ADDR -#define MXC_INT_CSPI3 MX2x_INT_CSPI3 -#define MXC_INT_GPIO MX2x_INT_GPIO -#define MXC_INT_SDHC2 MX2x_INT_SDHC2 -#define MXC_INT_SDHC1 MX2x_INT_SDHC1 -#define MXC_INT_I2C MX2x_INT_I2C -#define MXC_INT_SSI2 MX2x_INT_SSI2 -#define MXC_INT_SSI1 MX2x_INT_SSI1 -#define MXC_INT_CSPI2 MX2x_INT_CSPI2 -#define MXC_INT_CSPI1 MX2x_INT_CSPI1 -#define MXC_INT_UART4 MX2x_INT_UART4 -#define MXC_INT_UART3 MX2x_INT_UART3 -#define MXC_INT_UART2 MX2x_INT_UART2 -#define MXC_INT_UART1 MX2x_INT_UART1 -#define MXC_INT_KPP MX2x_INT_KPP -#define MXC_INT_RTC MX2x_INT_RTC -#define MXC_INT_PWM MX2x_INT_PWM -#define MXC_INT_GPT3 MX2x_INT_GPT3 -#define MXC_INT_GPT2 MX2x_INT_GPT2 -#define MXC_INT_GPT1 MX2x_INT_GPT1 -#define MXC_INT_WDOG MX2x_INT_WDOG -#define MXC_INT_PCMCIA MX2x_INT_PCMCIA -#define MXC_INT_NANDFC MX2x_INT_NANDFC -#define MXC_INT_CSI MX2x_INT_CSI -#define MXC_INT_DMACH0 MX2x_INT_DMACH0 -#define MXC_INT_DMACH1 MX2x_INT_DMACH1 -#define MXC_INT_DMACH2 MX2x_INT_DMACH2 -#define MXC_INT_DMACH3 MX2x_INT_DMACH3 -#define MXC_INT_DMACH4 MX2x_INT_DMACH4 -#define MXC_INT_DMACH5 MX2x_INT_DMACH5 -#define MXC_INT_DMACH6 MX2x_INT_DMACH6 -#define MXC_INT_DMACH7 MX2x_INT_DMACH7 -#define MXC_INT_DMACH8 MX2x_INT_DMACH8 -#define MXC_INT_DMACH9 MX2x_INT_DMACH9 -#define MXC_INT_DMACH10 MX2x_INT_DMACH10 -#define MXC_INT_DMACH11 MX2x_INT_DMACH11 -#define MXC_INT_DMACH12 MX2x_INT_DMACH12 -#define MXC_INT_DMACH13 MX2x_INT_DMACH13 -#define MXC_INT_DMACH14 MX2x_INT_DMACH14 -#define MXC_INT_DMACH15 MX2x_INT_DMACH15 -#define MXC_INT_EMMAPRP MX2x_INT_EMMAPRP -#define MXC_INT_EMMAPP MX2x_INT_EMMAPP -#define MXC_INT_SLCDC MX2x_INT_SLCDC -#define MXC_INT_LCDC MX2x_INT_LCDC -#define DMA_REQ_CSPI3_RX MX2x_DMA_REQ_CSPI3_RX -#define DMA_REQ_CSPI3_TX MX2x_DMA_REQ_CSPI3_TX -#define DMA_REQ_EXT MX2x_DMA_REQ_EXT -#define DMA_REQ_SDHC2 MX2x_DMA_REQ_SDHC2 -#define DMA_REQ_SDHC1 MX2x_DMA_REQ_SDHC1 -#define DMA_REQ_SSI2_RX0 MX2x_DMA_REQ_SSI2_RX0 -#define DMA_REQ_SSI2_TX0 MX2x_DMA_REQ_SSI2_TX0 -#define DMA_REQ_SSI2_RX1 MX2x_DMA_REQ_SSI2_RX1 -#define DMA_REQ_SSI2_TX1 MX2x_DMA_REQ_SSI2_TX1 -#define DMA_REQ_SSI1_RX0 MX2x_DMA_REQ_SSI1_RX0 -#define DMA_REQ_SSI1_TX0 MX2x_DMA_REQ_SSI1_TX0 -#define DMA_REQ_SSI1_RX1 MX2x_DMA_REQ_SSI1_RX1 -#define DMA_REQ_SSI1_TX1 MX2x_DMA_REQ_SSI1_TX1 -#define DMA_REQ_CSPI2_RX MX2x_DMA_REQ_CSPI2_RX -#define DMA_REQ_CSPI2_TX MX2x_DMA_REQ_CSPI2_TX -#define DMA_REQ_CSPI1_RX MX2x_DMA_REQ_CSPI1_RX -#define DMA_REQ_CSPI1_TX MX2x_DMA_REQ_CSPI1_TX -#define DMA_REQ_UART4_RX MX2x_DMA_REQ_UART4_RX -#define DMA_REQ_UART4_TX MX2x_DMA_REQ_UART4_TX -#define DMA_REQ_UART3_RX MX2x_DMA_REQ_UART3_RX -#define DMA_REQ_UART3_TX MX2x_DMA_REQ_UART3_TX -#define DMA_REQ_UART2_RX MX2x_DMA_REQ_UART2_RX -#define DMA_REQ_UART2_TX MX2x_DMA_REQ_UART2_TX -#define DMA_REQ_UART1_RX MX2x_DMA_REQ_UART1_RX -#define DMA_REQ_UART1_TX MX2x_DMA_REQ_UART1_TX -#define DMA_REQ_CSI_STAT MX2x_DMA_REQ_CSI_STAT -#define DMA_REQ_CSI_RX MX2x_DMA_REQ_CSI_RX -#endif - #endif /* ifndef __MACH_MX2x_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/mx31.h b/arch/arm/plat-mxc/include/mach/mx31.h index 61cfe827498..79e7fc01bb5 100644 --- a/arch/arm/plat-mxc/include/mach/mx31.h +++ b/arch/arm/plat-mxc/include/mach/mx31.h @@ -15,7 +15,6 @@ #define MX31_L2CC_SIZE SZ_1M #define MX31_AIPS1_BASE_ADDR 0x43f00000 -#define MX31_AIPS1_BASE_ADDR_VIRT 0xfc000000 #define MX31_AIPS1_SIZE SZ_1M #define MX31_MAX_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x04000) #define MX31_EVTMON_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x08000) @@ -25,7 +24,10 @@ #define MX31_ECT_CTIO_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x18000) #define MX31_I2C1_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x80000) #define MX31_I2C3_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x84000) -#define MX31_OTG_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x88000) +#define MX31_USB_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x88000) +#define MX31_USB_OTG_BASE_ADDR (MX31_USB_BASE_ADDR + 0x0000) +#define MX31_USB_HS1_BASE_ADDR (MX31_USB_BASE_ADDR + 0x0200) +#define MX31_USB_HS2_BASE_ADDR (MX31_USB_BASE_ADDR + 0x0400) #define MX31_ATA_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x8c000) #define MX31_UART1_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x90000) #define MX31_UART2_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x94000) @@ -41,10 +43,9 @@ #define MX31_ECT_IP2_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0xbc000) #define MX31_SPBA0_BASE_ADDR 0x50000000 -#define MX31_SPBA0_BASE_ADDR_VIRT 0xfc100000 #define MX31_SPBA0_SIZE SZ_1M -#define MX31_MMC_SDHC1_BASE_ADDR (MX31_SPBA0_BASE_ADDR + 0x04000) -#define MX31_MMC_SDHC2_BASE_ADDR (MX31_SPBA0_BASE_ADDR + 0x08000) +#define MX31_SDHC1_BASE_ADDR (MX31_SPBA0_BASE_ADDR + 0x04000) +#define MX31_SDHC2_BASE_ADDR (MX31_SPBA0_BASE_ADDR + 0x08000) #define MX31_UART3_BASE_ADDR (MX31_SPBA0_BASE_ADDR + 0x0c000) #define MX31_CSPI2_BASE_ADDR (MX31_SPBA0_BASE_ADDR + 0x10000) #define MX31_SSI2_BASE_ADDR (MX31_SPBA0_BASE_ADDR + 0x14000) @@ -55,7 +56,6 @@ #define MX31_SPBA_CTRL_BASE_ADDR (MX31_SPBA0_BASE_ADDR + 0x3c000) #define MX31_AIPS2_BASE_ADDR 0x53f00000 -#define MX31_AIPS2_BASE_ADDR_VIRT 0xfc200000 #define MX31_AIPS2_SIZE SZ_1M #define MX31_CCM_BASE_ADDR (MX31_AIPS2_BASE_ADDR + 0x80000) #define MX31_CSPI3_BASE_ADDR (MX31_AIPS2_BASE_ADDR + 0x84000) @@ -84,7 +84,6 @@ #define MX31_ROMP_SIZE SZ_1M #define MX31_AVIC_BASE_ADDR 0x68000000 -#define MX31_AVIC_BASE_ADDR_VIRT 0xfc400000 #define MX31_AVIC_SIZE SZ_1M #define MX31_IPU_MEM_BASE_ADDR 0x70000000 @@ -97,15 +96,14 @@ #define MX31_CS3_BASE_ADDR 0xb2000000 #define MX31_CS4_BASE_ADDR 0xb4000000 -#define MX31_CS4_BASE_ADDR_VIRT 0xf4000000 +#define MX31_CS4_BASE_ADDR_VIRT 0xf6000000 #define MX31_CS4_SIZE SZ_32M #define MX31_CS5_BASE_ADDR 0xb6000000 -#define MX31_CS5_BASE_ADDR_VIRT 0xf6000000 +#define MX31_CS5_BASE_ADDR_VIRT 0xf8000000 #define MX31_CS5_SIZE SZ_32M #define MX31_X_MEMC_BASE_ADDR 0xb8000000 -#define MX31_X_MEMC_BASE_ADDR_VIRT 0xfc320000 #define MX31_X_MEMC_SIZE SZ_64K #define MX31_NFC_BASE_ADDR (MX31_X_MEMC_BASE_ADDR + 0x0000) #define MX31_ESDCTL_BASE_ADDR (MX31_X_MEMC_BASE_ADDR + 0x1000) @@ -121,12 +119,8 @@ #define MX31_PCMCIA_MEM_BASE_ADDR 0xbc000000 -#define MX31_IO_ADDRESS(x) ( \ - IMX_IO_ADDRESS(x, MX31_AIPS1) ?: \ - IMX_IO_ADDRESS(x, MX31_AIPS2) ?: \ - IMX_IO_ADDRESS(x, MX31_AVIC) ?: \ - IMX_IO_ADDRESS(x, MX31_X_MEMC) ?: \ - IMX_IO_ADDRESS(x, MX31_SPBA0)) +#define MX31_IO_P2V(x) IMX_IO_P2V(x) +#define MX31_IO_ADDRESS(x) IOMEM(MX31_IO_P2V(x)) #ifndef __ASSEMBLER__ static inline void mx31_setup_weimcs(size_t cs, @@ -143,8 +137,8 @@ static inline void mx31_setup_weimcs(size_t cs, #define MX31_INT_MPEG4_ENCODER 5 #define MX31_INT_RTIC 6 #define MX31_INT_FIRI 7 -#define MX31_INT_MMC_SDHC2 8 -#define MX31_INT_MMC_SDHC1 9 +#define MX31_INT_SDHC2 8 +#define MX31_INT_SDHC1 9 #define MX31_INT_I2C1 10 #define MX31_INT_SSI2 11 #define MX31_INT_SSI1 12 @@ -170,10 +164,9 @@ static inline void mx31_setup_weimcs(size_t cs, #define MX31_INT_UART2 32 #define MX31_INT_NFC 33 #define MX31_INT_SDMA 34 -#define MX31_INT_USB1 35 -#define MX31_INT_USB2 36 -#define MX31_INT_USB3 37 -#define MX31_INT_USB4 38 +#define MX31_INT_USB_HS1 35 +#define MX31_INT_USB_HS2 36 +#define MX31_INT_USB_OTG 37 #define MX31_INT_MSHC1 39 #define MX31_INT_MSHC2 40 #define MX31_INT_IPU_ERR 41 @@ -197,6 +190,8 @@ static inline void mx31_setup_weimcs(size_t cs, #define MX31_INT_EXT_WDOG 62 #define MX31_INT_EXT_TV 63 +#define MX31_DMA_REQ_SDHC1 20 +#define MX31_DMA_REQ_SDHC2 21 #define MX31_DMA_REQ_SSI2_RX1 22 #define MX31_DMA_REQ_SSI2_TX1 23 #define MX31_DMA_REQ_SSI2_RX0 24 @@ -208,52 +203,4 @@ static inline void mx31_setup_weimcs(size_t cs, #define MX31_PROD_SIGNATURE 0x1 /* For MX31 */ -/* silicon revisions specific to i.MX31 */ -#define MX31_CHIP_REV_1_0 0x10 -#define MX31_CHIP_REV_1_1 0x11 -#define MX31_CHIP_REV_1_2 0x12 -#define MX31_CHIP_REV_1_3 0x13 -#define MX31_CHIP_REV_2_0 0x20 -#define MX31_CHIP_REV_2_1 0x21 -#define MX31_CHIP_REV_2_2 0x22 -#define MX31_CHIP_REV_2_3 0x23 -#define MX31_CHIP_REV_3_0 0x30 -#define MX31_CHIP_REV_3_1 0x31 -#define MX31_CHIP_REV_3_2 0x32 - -#define MX31_SYSTEM_REV_MIN MX31_CHIP_REV_1_0 -#define MX31_SYSTEM_REV_NUM 3 - -#ifdef IMX_NEEDS_DEPRECATED_SYMBOLS -/* these should go away */ -#define ATA_BASE_ADDR MX31_ATA_BASE_ADDR -#define UART4_BASE_ADDR MX31_UART4_BASE_ADDR -#define UART5_BASE_ADDR MX31_UART5_BASE_ADDR -#define MMC_SDHC1_BASE_ADDR MX31_MMC_SDHC1_BASE_ADDR -#define MMC_SDHC2_BASE_ADDR MX31_MMC_SDHC2_BASE_ADDR -#define SIM1_BASE_ADDR MX31_SIM1_BASE_ADDR -#define IIM_BASE_ADDR MX31_IIM_BASE_ADDR -#define CSPI3_BASE_ADDR MX31_CSPI3_BASE_ADDR -#define FIRI_BASE_ADDR MX31_FIRI_BASE_ADDR -#define SCM_BASE_ADDR MX31_SCM_BASE_ADDR -#define SMN_BASE_ADDR MX31_SMN_BASE_ADDR -#define MPEG4_ENC_BASE_ADDR MX31_MPEG4_ENC_BASE_ADDR -#define MXC_INT_MPEG4_ENCODER MX31_INT_MPEG4_ENCODER -#define MXC_INT_FIRI MX31_INT_FIRI -#define MXC_INT_MBX MX31_INT_MBX -#define MXC_INT_CSPI3 MX31_INT_CSPI3 -#define MXC_INT_SIM2 MX31_INT_SIM2 -#define MXC_INT_SIM1 MX31_INT_SIM1 -#define MXC_INT_CCM_DVFS MX31_INT_CCM_DVFS -#define MXC_INT_USB1 MX31_INT_USB1 -#define MXC_INT_USB2 MX31_INT_USB2 -#define MXC_INT_USB3 MX31_INT_USB3 -#define MXC_INT_USB4 MX31_INT_USB4 -#define MXC_INT_MSHC2 MX31_INT_MSHC2 -#define MXC_INT_UART4 MX31_INT_UART4 -#define MXC_INT_UART5 MX31_INT_UART5 -#define MXC_INT_CCM MX31_INT_CCM -#define MXC_INT_PCMCIA MX31_INT_PCMCIA -#endif - #endif /* ifndef __MACH_MX31_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/mx35.h b/arch/arm/plat-mxc/include/mach/mx35.h index 6267cff6035..d13dbfeef08 100644 --- a/arch/arm/plat-mxc/include/mach/mx35.h +++ b/arch/arm/plat-mxc/include/mach/mx35.h @@ -11,7 +11,6 @@ #define MX35_L2CC_SIZE SZ_1M #define MX35_AIPS1_BASE_ADDR 0x43f00000 -#define MX35_AIPS1_BASE_ADDR_VIRT 0xfc000000 #define MX35_AIPS1_SIZE SZ_1M #define MX35_MAX_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0x04000) #define MX35_EVTMON_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0x08000) @@ -33,7 +32,6 @@ #define MX35_ECT_IP2_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0xbc000) #define MX35_SPBA0_BASE_ADDR 0x50000000 -#define MX35_SPBA0_BASE_ADDR_VIRT 0xfc100000 #define MX35_SPBA0_SIZE SZ_1M #define MX35_UART3_BASE_ADDR (MX35_SPBA0_BASE_ADDR + 0x0c000) #define MX35_CSPI2_BASE_ADDR (MX35_SPBA0_BASE_ADDR + 0x10000) @@ -44,7 +42,6 @@ #define MX35_SPBA_CTRL_BASE_ADDR (MX35_SPBA0_BASE_ADDR + 0x3c000) #define MX35_AIPS2_BASE_ADDR 0x53f00000 -#define MX35_AIPS2_BASE_ADDR_VIRT 0xfc200000 #define MX35_AIPS2_SIZE SZ_1M #define MX35_CCM_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0x80000) #define MX35_GPT1_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0x90000) @@ -68,15 +65,19 @@ #define MX35_CAN2_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xe8000) #define MX35_RTIC_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xec000) #define MX35_IIM_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xf0000) - -#define MX35_OTG_BASE_ADDR 0x53ff4000 +#define MX35_USB_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xf4000) +#define MX35_USB_OTG_BASE_ADDR (MX35_USB_BASE_ADDR + 0x0000) +/* + * The Reference Manual (IMX35RM, Rev. 2, 3/2009) claims an offset of 0x200 for + * HS. When host support was implemented only a preliminary document was + * available, which told 0x400. This works fine. + */ +#define MX35_USB_HS_BASE_ADDR (MX35_USB_BASE_ADDR + 0x0400) #define MX35_ROMP_BASE_ADDR 0x60000000 -#define MX35_ROMP_BASE_ADDR_VIRT 0xfc500000 #define MX35_ROMP_SIZE SZ_1M #define MX35_AVIC_BASE_ADDR 0x68000000 -#define MX35_AVIC_BASE_ADDR_VIRT 0xfc400000 #define MX35_AVIC_SIZE SZ_1M /* @@ -92,18 +93,17 @@ #define MX35_CS3_BASE_ADDR 0xb2000000 #define MX35_CS4_BASE_ADDR 0xb4000000 -#define MX35_CS4_BASE_ADDR_VIRT 0xf4000000 +#define MX35_CS4_BASE_ADDR_VIRT 0xf6000000 #define MX35_CS4_SIZE SZ_32M #define MX35_CS5_BASE_ADDR 0xb6000000 -#define MX35_CS5_BASE_ADDR_VIRT 0xf6000000 +#define MX35_CS5_BASE_ADDR_VIRT 0xf8000000 #define MX35_CS5_SIZE SZ_32M /* * NAND, SDRAM, WEIM, M3IF, EMI controllers */ #define MX35_X_MEMC_BASE_ADDR 0xb8000000 -#define MX35_X_MEMC_BASE_ADDR_VIRT 0xfc320000 #define MX35_X_MEMC_SIZE SZ_64K #define MX35_ESDCTL_BASE_ADDR (MX35_X_MEMC_BASE_ADDR + 0x1000) #define MX35_WEIM_BASE_ADDR (MX35_X_MEMC_BASE_ADDR + 0x2000) @@ -114,12 +114,8 @@ #define MX35_NFC_BASE_ADDR 0xbb000000 #define MX35_PCMCIA_MEM_BASE_ADDR 0xbc000000 -#define MX35_IO_ADDRESS(x) ( \ - IMX_IO_ADDRESS(x, MX35_AIPS1) ?: \ - IMX_IO_ADDRESS(x, MX35_AIPS2) ?: \ - IMX_IO_ADDRESS(x, MX35_AVIC) ?: \ - IMX_IO_ADDRESS(x, MX35_X_MEMC) ?: \ - IMX_IO_ADDRESS(x, MX35_SPBA0)) +#define MX35_IO_P2V(x) IMX_IO_P2V(x) +#define MX35_IO_ADDRESS(x) IOMEM(MX35_IO_P2V(x)) /* * Interrupt numbers @@ -153,8 +149,8 @@ #define MX35_INT_UART2 32 #define MX35_INT_NFC 33 #define MX35_INT_SDMA 34 -#define MX35_INT_USBHS 35 -#define MX35_INT_USBOTG 37 +#define MX35_INT_USB_HS 35 +#define MX35_INT_USB_OTG 37 #define MX35_INT_MSHC1 39 #define MX35_INT_ESAI 40 #define MX35_INT_IPU_ERR 41 @@ -190,23 +186,4 @@ #define MX35_PROD_SIGNATURE 0x1 /* For MX31 */ -#define MX35_SYSTEM_REV_MIN MX3x_CHIP_REV_1_0 -#define MX35_SYSTEM_REV_NUM 3 - -#ifdef IMX_NEEDS_DEPRECATED_SYMBOLS -/* these should go away */ -#define MXC_FEC_BASE_ADDR MX35_FEC_BASE_ADDR -#define MXC_INT_OWIRE MX35_INT_OWIRE -#define MXC_INT_GPU2D MX35_INT_GPU2D -#define MXC_INT_ASRC MX35_INT_ASRC -#define MXC_INT_USBHS MX35_INT_USBHS -#define MXC_INT_USBOTG MX35_INT_USBOTG -#define MXC_INT_ESAI MX35_INT_ESAI -#define MXC_INT_CAN1 MX35_INT_CAN1 -#define MXC_INT_CAN2 MX35_INT_CAN2 -#define MXC_INT_MLB MX35_INT_MLB -#define MXC_INT_SPDIF MX35_INT_SPDIF -#define MXC_INT_FEC MX35_INT_FEC -#endif - #endif /* ifndef __MACH_MX35_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/mx3x.h b/arch/arm/plat-mxc/include/mach/mx3x.h index d1bd26d7b8a..388a407d72d 100644 --- a/arch/arm/plat-mxc/include/mach/mx3x.h +++ b/arch/arm/plat-mxc/include/mach/mx3x.h @@ -44,7 +44,6 @@ * AIPS 1 */ #define MX3x_AIPS1_BASE_ADDR 0x43f00000 -#define MX3x_AIPS1_BASE_ADDR_VIRT 0xfc000000 #define MX3x_AIPS1_SIZE SZ_1M #define MX3x_MAX_BASE_ADDR (MX3x_AIPS1_BASE_ADDR + 0x04000) #define MX3x_EVTMON_BASE_ADDR (MX3x_AIPS1_BASE_ADDR + 0x08000) @@ -69,7 +68,6 @@ * SPBA global module enabled #0 */ #define MX3x_SPBA0_BASE_ADDR 0x50000000 -#define MX3x_SPBA0_BASE_ADDR_VIRT 0xfc100000 #define MX3x_SPBA0_SIZE SZ_1M #define MX3x_UART3_BASE_ADDR (MX3x_SPBA0_BASE_ADDR + 0x0c000) #define MX3x_CSPI2_BASE_ADDR (MX3x_SPBA0_BASE_ADDR + 0x10000) @@ -82,7 +80,6 @@ * AIPS 2 */ #define MX3x_AIPS2_BASE_ADDR 0x53f00000 -#define MX3x_AIPS2_BASE_ADDR_VIRT 0xfc200000 #define MX3x_AIPS2_SIZE SZ_1M #define MX3x_CCM_BASE_ADDR (MX3x_AIPS2_BASE_ADDR + 0x80000) #define MX3x_GPT1_BASE_ADDR (MX3x_AIPS2_BASE_ADDR + 0x90000) @@ -105,11 +102,9 @@ * ROMP and AVIC */ #define MX3x_ROMP_BASE_ADDR 0x60000000 -#define MX3x_ROMP_BASE_ADDR_VIRT 0xfc500000 #define MX3x_ROMP_SIZE SZ_1M #define MX3x_AVIC_BASE_ADDR 0x68000000 -#define MX3x_AVIC_BASE_ADDR_VIRT 0xfc400000 #define MX3x_AVIC_SIZE SZ_1M /* @@ -125,18 +120,17 @@ #define MX3x_CS3_BASE_ADDR 0xb2000000 #define MX3x_CS4_BASE_ADDR 0xb4000000 -#define MX3x_CS4_BASE_ADDR_VIRT 0xf4000000 +#define MX3x_CS4_BASE_ADDR_VIRT 0xf6000000 #define MX3x_CS4_SIZE SZ_32M #define MX3x_CS5_BASE_ADDR 0xb6000000 -#define MX3x_CS5_BASE_ADDR_VIRT 0xf6000000 +#define MX3x_CS5_BASE_ADDR_VIRT 0xf8000000 #define MX3x_CS5_SIZE SZ_32M /* * NAND, SDRAM, WEIM, M3IF, EMI controllers */ #define MX3x_X_MEMC_BASE_ADDR 0xb8000000 -#define MX3x_X_MEMC_BASE_ADDR_VIRT 0xfc320000 #define MX3x_X_MEMC_SIZE SZ_64K #define MX3x_ESDCTL_BASE_ADDR (MX3x_X_MEMC_BASE_ADDR + 0x1000) #define MX3x_WEIM_BASE_ADDR (MX3x_X_MEMC_BASE_ADDR + 0x2000) @@ -146,56 +140,6 @@ #define MX3x_PCMCIA_MEM_BASE_ADDR 0xbc000000 -/*! - * This macro defines the physical to virtual address mapping for all the - * peripheral modules. It is used by passing in the physical address as x - * and returning the virtual address. If the physical address is not mapped, - * it returns 0xDEADBEEF - */ -#define IO_ADDRESS(x) \ - (void __force __iomem *) \ - (((x >= AIPS1_BASE_ADDR) && (x < (AIPS1_BASE_ADDR + AIPS1_SIZE))) ? AIPS1_IO_ADDRESS(x):\ - ((x >= SPBA0_BASE_ADDR) && (x < (SPBA0_BASE_ADDR + SPBA0_SIZE))) ? SPBA0_IO_ADDRESS(x):\ - ((x >= AIPS2_BASE_ADDR) && (x < (AIPS2_BASE_ADDR + AIPS2_SIZE))) ? AIPS2_IO_ADDRESS(x):\ - ((x >= ROMP_BASE_ADDR) && (x < (ROMP_BASE_ADDR + ROMP_SIZE))) ? ROMP_IO_ADDRESS(x):\ - ((x >= AVIC_BASE_ADDR) && (x < (AVIC_BASE_ADDR + AVIC_SIZE))) ? AVIC_IO_ADDRESS(x):\ - ((x >= CS4_BASE_ADDR) && (x < (CS4_BASE_ADDR + CS4_SIZE))) ? CS4_IO_ADDRESS(x):\ - ((x >= X_MEMC_BASE_ADDR) && (x < (X_MEMC_BASE_ADDR + X_MEMC_SIZE))) ? X_MEMC_IO_ADDRESS(x):\ - 0xDEADBEEF) - -/* - * define the address mapping macros: in physical address order - */ -#define L2CC_IO_ADDRESS(x) \ - (((x) - L2CC_BASE_ADDR) + L2CC_BASE_ADDR_VIRT) - -#define AIPS1_IO_ADDRESS(x) \ - (((x) - AIPS1_BASE_ADDR) + AIPS1_BASE_ADDR_VIRT) - -#define SPBA0_IO_ADDRESS(x) \ - (((x) - SPBA0_BASE_ADDR) + SPBA0_BASE_ADDR_VIRT) - -#define AIPS2_IO_ADDRESS(x) \ - (((x) - AIPS2_BASE_ADDR) + AIPS2_BASE_ADDR_VIRT) - -#define ROMP_IO_ADDRESS(x) \ - (((x) - ROMP_BASE_ADDR) + ROMP_BASE_ADDR_VIRT) - -#define AVIC_IO_ADDRESS(x) \ - (((x) - AVIC_BASE_ADDR) + AVIC_BASE_ADDR_VIRT) - -#define CS4_IO_ADDRESS(x) \ - (((x) - CS4_BASE_ADDR) + CS4_BASE_ADDR_VIRT) - -#define CS5_IO_ADDRESS(x) \ - (((x) - CS5_BASE_ADDR) + CS5_BASE_ADDR_VIRT) - -#define X_MEMC_IO_ADDRESS(x) \ - (((x) - X_MEMC_BASE_ADDR) + X_MEMC_BASE_ADDR_VIRT) - -#define PCMCIA_IO_ADDRESS(x) \ - (((x) - X_MEMC_BASE_ADDR) + X_MEMC_BASE_ADDR_VIRT) - /* * Interrupt numbers */ @@ -240,22 +184,6 @@ #define MX3x_PROD_SIGNATURE 0x1 /* For MX31 */ -/* silicon revisions specific to i.MX31 and i.MX35 */ -#define MX3x_CHIP_REV_1_0 0x10 -#define MX3x_CHIP_REV_1_1 0x11 -#define MX3x_CHIP_REV_1_2 0x12 -#define MX3x_CHIP_REV_1_3 0x13 -#define MX3x_CHIP_REV_2_0 0x20 -#define MX3x_CHIP_REV_2_1 0x21 -#define MX3x_CHIP_REV_2_2 0x22 -#define MX3x_CHIP_REV_2_3 0x23 -#define MX3x_CHIP_REV_3_0 0x30 -#define MX3x_CHIP_REV_3_1 0x31 -#define MX3x_CHIP_REV_3_2 0x32 - -#define MX3x_SYSTEM_REV_MIN MX3x_CHIP_REV_1_0 -#define MX3x_SYSTEM_REV_NUM 3 - /* Mandatory defines used globally */ #if !defined(__ASSEMBLY__) && !defined(__MXC_BOOT_UNCOMPRESS) @@ -277,126 +205,4 @@ static inline int mx35_revision(void) } #endif -#ifdef IMX_NEEDS_DEPRECATED_SYMBOLS -/* these should go away */ -#define L2CC_BASE_ADDR MX3x_L2CC_BASE_ADDR -#define L2CC_SIZE MX3x_L2CC_SIZE -#define AIPS1_BASE_ADDR MX3x_AIPS1_BASE_ADDR -#define AIPS1_BASE_ADDR_VIRT MX3x_AIPS1_BASE_ADDR_VIRT -#define AIPS1_SIZE MX3x_AIPS1_SIZE -#define MAX_BASE_ADDR MX3x_MAX_BASE_ADDR -#define EVTMON_BASE_ADDR MX3x_EVTMON_BASE_ADDR -#define CLKCTL_BASE_ADDR MX3x_CLKCTL_BASE_ADDR -#define ETB_SLOT4_BASE_ADDR MX3x_ETB_SLOT4_BASE_ADDR -#define ETB_SLOT5_BASE_ADDR MX3x_ETB_SLOT5_BASE_ADDR -#define ECT_CTIO_BASE_ADDR MX3x_ECT_CTIO_BASE_ADDR -#define I2C_BASE_ADDR MX3x_I2C_BASE_ADDR -#define I2C3_BASE_ADDR MX3x_I2C3_BASE_ADDR -#define UART1_BASE_ADDR MX3x_UART1_BASE_ADDR -#define UART2_BASE_ADDR MX3x_UART2_BASE_ADDR -#define I2C2_BASE_ADDR MX3x_I2C2_BASE_ADDR -#define OWIRE_BASE_ADDR MX3x_OWIRE_BASE_ADDR -#define SSI1_BASE_ADDR MX3x_SSI1_BASE_ADDR -#define CSPI1_BASE_ADDR MX3x_CSPI1_BASE_ADDR -#define KPP_BASE_ADDR MX3x_KPP_BASE_ADDR -#define IOMUXC_BASE_ADDR MX3x_IOMUXC_BASE_ADDR -#define ECT_IP1_BASE_ADDR MX3x_ECT_IP1_BASE_ADDR -#define ECT_IP2_BASE_ADDR MX3x_ECT_IP2_BASE_ADDR -#define SPBA0_BASE_ADDR MX3x_SPBA0_BASE_ADDR -#define SPBA0_BASE_ADDR_VIRT MX3x_SPBA0_BASE_ADDR_VIRT -#define SPBA0_SIZE MX3x_SPBA0_SIZE -#define UART3_BASE_ADDR MX3x_UART3_BASE_ADDR -#define CSPI2_BASE_ADDR MX3x_CSPI2_BASE_ADDR -#define SSI2_BASE_ADDR MX3x_SSI2_BASE_ADDR -#define ATA_DMA_BASE_ADDR MX3x_ATA_DMA_BASE_ADDR -#define MSHC1_BASE_ADDR MX3x_MSHC1_BASE_ADDR -#define SPBA_CTRL_BASE_ADDR MX3x_SPBA_CTRL_BASE_ADDR -#define AIPS2_BASE_ADDR MX3x_AIPS2_BASE_ADDR -#define AIPS2_BASE_ADDR_VIRT MX3x_AIPS2_BASE_ADDR_VIRT -#define AIPS2_SIZE MX3x_AIPS2_SIZE -#define CCM_BASE_ADDR MX3x_CCM_BASE_ADDR -#define GPT1_BASE_ADDR MX3x_GPT1_BASE_ADDR -#define EPIT1_BASE_ADDR MX3x_EPIT1_BASE_ADDR -#define EPIT2_BASE_ADDR MX3x_EPIT2_BASE_ADDR -#define GPIO3_BASE_ADDR MX3x_GPIO3_BASE_ADDR -#define SCC_BASE_ADDR MX3x_SCC_BASE_ADDR -#define RNGA_BASE_ADDR MX3x_RNGA_BASE_ADDR -#define IPU_CTRL_BASE_ADDR MX3x_IPU_CTRL_BASE_ADDR -#define AUDMUX_BASE_ADDR MX3x_AUDMUX_BASE_ADDR -#define GPIO1_BASE_ADDR MX3x_GPIO1_BASE_ADDR -#define GPIO2_BASE_ADDR MX3x_GPIO2_BASE_ADDR -#define SDMA_BASE_ADDR MX3x_SDMA_BASE_ADDR -#define RTC_BASE_ADDR MX3x_RTC_BASE_ADDR -#define WDOG_BASE_ADDR MX3x_WDOG_BASE_ADDR -#define PWM_BASE_ADDR MX3x_PWM_BASE_ADDR -#define RTIC_BASE_ADDR MX3x_RTIC_BASE_ADDR -#define ROMP_BASE_ADDR MX3x_ROMP_BASE_ADDR -#define ROMP_BASE_ADDR_VIRT MX3x_ROMP_BASE_ADDR_VIRT -#define ROMP_SIZE MX3x_ROMP_SIZE -#define AVIC_BASE_ADDR MX3x_AVIC_BASE_ADDR -#define AVIC_BASE_ADDR_VIRT MX3x_AVIC_BASE_ADDR_VIRT -#define AVIC_SIZE MX3x_AVIC_SIZE -#define IPU_MEM_BASE_ADDR MX3x_IPU_MEM_BASE_ADDR -#define CSD0_BASE_ADDR MX3x_CSD0_BASE_ADDR -#define CSD1_BASE_ADDR MX3x_CSD1_BASE_ADDR -#define CS0_BASE_ADDR MX3x_CS0_BASE_ADDR -#define CS1_BASE_ADDR MX3x_CS1_BASE_ADDR -#define CS2_BASE_ADDR MX3x_CS2_BASE_ADDR -#define CS3_BASE_ADDR MX3x_CS3_BASE_ADDR -#define CS4_BASE_ADDR MX3x_CS4_BASE_ADDR -#define CS4_BASE_ADDR_VIRT MX3x_CS4_BASE_ADDR_VIRT -#define CS4_SIZE MX3x_CS4_SIZE -#define CS5_BASE_ADDR MX3x_CS5_BASE_ADDR -#define CS5_BASE_ADDR_VIRT MX3x_CS5_BASE_ADDR_VIRT -#define CS5_SIZE MX3x_CS5_SIZE -#define X_MEMC_BASE_ADDR MX3x_X_MEMC_BASE_ADDR -#define X_MEMC_BASE_ADDR_VIRT MX3x_X_MEMC_BASE_ADDR_VIRT -#define X_MEMC_SIZE MX3x_X_MEMC_SIZE -#define ESDCTL_BASE_ADDR MX3x_ESDCTL_BASE_ADDR -#define WEIM_BASE_ADDR MX3x_WEIM_BASE_ADDR -#define M3IF_BASE_ADDR MX3x_M3IF_BASE_ADDR -#define EMI_CTL_BASE_ADDR MX3x_EMI_CTL_BASE_ADDR -#define PCMCIA_CTL_BASE_ADDR MX3x_PCMCIA_CTL_BASE_ADDR -#define PCMCIA_MEM_BASE_ADDR MX3x_PCMCIA_MEM_BASE_ADDR -#define MXC_INT_I2C3 MX3x_INT_I2C3 -#define MXC_INT_I2C2 MX3x_INT_I2C2 -#define MXC_INT_RTIC MX3x_INT_RTIC -#define MXC_INT_I2C MX3x_INT_I2C -#define MXC_INT_CSPI2 MX3x_INT_CSPI2 -#define MXC_INT_CSPI1 MX3x_INT_CSPI1 -#define MXC_INT_ATA MX3x_INT_ATA -#define MXC_INT_UART3 MX3x_INT_UART3 -#define MXC_INT_IIM MX3x_INT_IIM -#define MXC_INT_RNGA MX3x_INT_RNGA -#define MXC_INT_EVTMON MX3x_INT_EVTMON -#define MXC_INT_KPP MX3x_INT_KPP -#define MXC_INT_RTC MX3x_INT_RTC -#define MXC_INT_PWM MX3x_INT_PWM -#define MXC_INT_EPIT2 MX3x_INT_EPIT2 -#define MXC_INT_EPIT1 MX3x_INT_EPIT1 -#define MXC_INT_GPT MX3x_INT_GPT -#define MXC_INT_POWER_FAIL MX3x_INT_POWER_FAIL -#define MXC_INT_UART2 MX3x_INT_UART2 -#define MXC_INT_NANDFC MX3x_INT_NANDFC -#define MXC_INT_SDMA MX3x_INT_SDMA -#define MXC_INT_MSHC1 MX3x_INT_MSHC1 -#define MXC_INT_IPU_ERR MX3x_INT_IPU_ERR -#define MXC_INT_IPU_SYN MX3x_INT_IPU_SYN -#define MXC_INT_UART1 MX3x_INT_UART1 -#define MXC_INT_ECT MX3x_INT_ECT -#define MXC_INT_SCC_SCM MX3x_INT_SCC_SCM -#define MXC_INT_SCC_SMN MX3x_INT_SCC_SMN -#define MXC_INT_GPIO2 MX3x_INT_GPIO2 -#define MXC_INT_GPIO1 MX3x_INT_GPIO1 -#define MXC_INT_WDOG MX3x_INT_WDOG -#define MXC_INT_GPIO3 MX3x_INT_GPIO3 -#define MXC_INT_EXT_POWER MX3x_INT_EXT_POWER -#define MXC_INT_EXT_TEMPER MX3x_INT_EXT_TEMPER -#define MXC_INT_EXT_SENSOR60 MX3x_INT_EXT_SENSOR60 -#define MXC_INT_EXT_SENSOR61 MX3x_INT_EXT_SENSOR61 -#define MXC_INT_EXT_WDOG MX3x_INT_EXT_WDOG -#define MXC_INT_EXT_TV MX3x_INT_EXT_TV -#define PROD_SIGNATURE MX3x_PROD_SIGNATURE -#endif - #endif /* ifndef __MACH_MX3x_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/mx50.h b/arch/arm/plat-mxc/include/mach/mx50.h new file mode 100644 index 00000000000..aaec2a6e7b3 --- /dev/null +++ b/arch/arm/plat-mxc/include/mach/mx50.h @@ -0,0 +1,285 @@ +#ifndef __MACH_MX50_H__ +#define __MACH_MX50_H__ + +/* + * IROM + */ +#define MX50_IROM_BASE_ADDR 0x0 +#define MX50_IROM_SIZE SZ_64K + +/* TZIC */ +#define MX50_TZIC_BASE_ADDR 0x0fffc000 +#define MX50_TZIC_SIZE SZ_16K + +/* + * IRAM + */ +#define MX50_IRAM_BASE_ADDR 0xf8000000 /* internal ram */ +#define MX50_IRAM_PARTITIONS 16 +#define MX50_IRAM_SIZE (MX50_IRAM_PARTITIONS * SZ_8K) /* 128KB */ + +/* + * Databahn + */ +#define MX50_DATABAHN_BASE_ADDR 0x14000000 + +/* + * Graphics Memory of GPU + */ +#define MX50_GPU2D_BASE_ADDR 0x20000000 + +#define MX50_DEBUG_BASE_ADDR 0x40000000 +#define MX50_DEBUG_SIZE SZ_1M +#define MX50_ETB_BASE_ADDR (MX50_DEBUG_BASE_ADDR + 0x00001000) +#define MX50_ETM_BASE_ADDR (MX50_DEBUG_BASE_ADDR + 0x00002000) +#define MX50_TPIU_BASE_ADDR (MX50_DEBUG_BASE_ADDR + 0x00003000) +#define MX50_CTI0_BASE_ADDR (MX50_DEBUG_BASE_ADDR + 0x00004000) +#define MX50_CTI1_BASE_ADDR (MX50_DEBUG_BASE_ADDR + 0x00005000) +#define MX50_CTI2_BASE_ADDR (MX50_DEBUG_BASE_ADDR + 0x00006000) +#define MX50_CTI3_BASE_ADDR (MX50_DEBUG_BASE_ADDR + 0x00007000) +#define MX50_CORTEX_DBG_BASE_ADDR (MX50_DEBUG_BASE_ADDR + 0x00008000) + +#define MX50_APBHDMA_BASE_ADDR (MX50_DEBUG_BASE_ADDR + 0x01000000) +#define MX50_OCOTP_CTRL_BASE_ADDR (MX50_DEBUG_BASE_ADDR + 0x01002000) +#define MX50_DIGCTL_BASE_ADDR (MX50_DEBUG_BASE_ADDR + 0x01004000) +#define MX50_GPMI_BASE_ADDR (MX50_DEBUG_BASE_ADDR + 0x01006000) +#define MX50_BCH_BASE_ADDR (MX50_DEBUG_BASE_ADDR + 0x01008000) +#define MX50_ELCDIF_BASE_ADDR (MX50_DEBUG_BASE_ADDR + 0x0100a000) +#define MX50_EPXP_BASE_ADDR (MX50_DEBUG_BASE_ADDR + 0x0100c000) +#define MX50_DCP_BASE_ADDR (MX50_DEBUG_BASE_ADDR + 0x0100e000) +#define MX50_EPDC_BASE_ADDR (MX50_DEBUG_BASE_ADDR + 0x01010000) +#define MX50_QOSC_BASE_ADDR (MX50_DEBUG_BASE_ADDR + 0x01012000) +#define MX50_PERFMON_BASE_ADDR (MX50_DEBUG_BASE_ADDR + 0x01014000) +#define MX50_SSP_BASE_ADDR (MX50_DEBUG_BASE_ADDR + 0x01016000) +#define MX50_ANATOP_BASE_ADDR (MX50_DEBUG_BASE_ADDR + 0x01018000) +#define MX50_NIC_BASE_ADDR (MX50_DEBUG_BASE_ADDR + 0x08000000) + +/* + * SPBA global module enabled #0 + */ +#define MX50_SPBA0_BASE_ADDR 0x50000000 +#define MX50_SPBA0_SIZE SZ_1M + +#define MX50_MMC_SDHC1_BASE_ADDR (MX50_SPBA0_BASE_ADDR + 0x00004000) +#define MX50_MMC_SDHC2_BASE_ADDR (MX50_SPBA0_BASE_ADDR + 0x00008000) +#define MX50_UART3_BASE_ADDR (MX50_SPBA0_BASE_ADDR + 0x0000c000) +#define MX50_CSPI1_BASE_ADDR (MX50_SPBA0_BASE_ADDR + 0x00010000) +#define MX50_SSI2_BASE_ADDR (MX50_SPBA0_BASE_ADDR + 0x00014000) +#define MX50_MMC_SDHC3_BASE_ADDR (MX50_SPBA0_BASE_ADDR + 0x00020000) +#define MX50_MMC_SDHC4_BASE_ADDR (MX50_SPBA0_BASE_ADDR + 0x00024000) + +/* + * AIPS 1 + */ +#define MX50_AIPS1_BASE_ADDR 0x53f00000 +#define MX50_AIPS1_SIZE SZ_1M + +#define MX50_OTG_BASE_ADDR (MX50_AIPS1_BASE_ADDR + 0x00080000) +#define MX50_GPIO1_BASE_ADDR (MX50_AIPS1_BASE_ADDR + 0x00084000) +#define MX50_GPIO2_BASE_ADDR (MX50_AIPS1_BASE_ADDR + 0x00088000) +#define MX50_GPIO3_BASE_ADDR (MX50_AIPS1_BASE_ADDR + 0x0008c000) +#define MX50_GPIO4_BASE_ADDR (MX50_AIPS1_BASE_ADDR + 0x00090000) +#define MX50_KPP_BASE_ADDR (MX50_AIPS1_BASE_ADDR + 0x00094000) +#define MX50_WDOG_BASE_ADDR (MX50_AIPS1_BASE_ADDR + 0x00098000) +#define MX50_GPT1_BASE_ADDR (MX50_AIPS1_BASE_ADDR + 0x000a0000) +#define MX50_SRTC_BASE_ADDR (MX50_AIPS1_BASE_ADDR + 0x000a4000) +#define MX50_IOMUXC_BASE_ADDR (MX50_AIPS1_BASE_ADDR + 0x000a8000) +#define MX50_EPIT1_BASE_ADDR (MX50_AIPS1_BASE_ADDR + 0x000ac000) +#define MX50_PWM1_BASE_ADDR (MX50_AIPS1_BASE_ADDR + 0x000b4000) +#define MX50_PWM2_BASE_ADDR (MX50_AIPS1_BASE_ADDR + 0x000b8000) +#define MX50_UART1_BASE_ADDR (MX50_AIPS1_BASE_ADDR + 0x000bc000) +#define MX50_UART2_BASE_ADDR (MX50_AIPS1_BASE_ADDR + 0x000c0000) +#define MX50_SRC_BASE_ADDR (MX50_AIPS1_BASE_ADDR + 0x000d0000) +#define MX50_CCM_BASE_ADDR (MX50_AIPS1_BASE_ADDR + 0x000d4000) +#define MX50_GPC_BASE_ADDR (MX50_AIPS1_BASE_ADDR + 0x000d8000) +#define MX50_GPIO5_BASE_ADDR (MX50_AIPS1_BASE_ADDR + 0x000dc000) +#define MX50_GPIO6_BASE_ADDR (MX50_AIPS1_BASE_ADDR + 0x000e0000) +#define MX50_I2C3_BASE_ADDR (MX50_AIPS1_BASE_ADDR + 0x000ec000) +#define MX50_UART4_BASE_ADDR (MX50_AIPS1_BASE_ADDR + 0x000f0000) + +#define MX50_MSHC_BASE_ADDR (MX50_AIPS1_BASE_ADDR + 0x000f4000) +#define MX50_RNGB_BASE_ADDR (MX50_AIPS1_BASE_ADDR + 0x000f8000) + +/* + * AIPS 2 + */ +#define MX50_AIPS2_BASE_ADDR 0x63f00000 +#define MX50_AIPS2_SIZE SZ_1M + +#define MX50_PLL1_BASE_ADDR (MX50_AIPS2_BASE_ADDR + 0x00080000) +#define MX50_PLL2_BASE_ADDR (MX50_AIPS2_BASE_ADDR + 0x00084000) +#define MX50_PLL3_BASE_ADDR (MX50_AIPS2_BASE_ADDR + 0x00088000) +#define MX50_UART5_BASE_ADDR (MX50_AIPS2_BASE_ADDR + 0x00090000) +#define MX50_AHBMAX_BASE_ADDR (MX50_AIPS2_BASE_ADDR + 0x00094000) +#define MX50_ARM_BASE_ADDR (MX50_AIPS2_BASE_ADDR + 0x000a0000) +#define MX50_OWIRE_BASE_ADDR (MX50_AIPS2_BASE_ADDR + 0x000a4000) +#define MX50_CSPI2_BASE_ADDR (MX50_AIPS2_BASE_ADDR + 0x000ac000) +#define MX50_SDMA_BASE_ADDR (MX50_AIPS2_BASE_ADDR + 0x000b0000) +#define MX50_ROMCP_BASE_ADDR (MX50_AIPS2_BASE_ADDR + 0x000b8000) +#define MX50_CSPI3_BASE_ADDR (MX50_AIPS2_BASE_ADDR + 0x000c0000) +#define MX50_I2C2_BASE_ADDR (MX50_AIPS2_BASE_ADDR + 0x000c4000) +#define MX50_I2C1_BASE_ADDR (MX50_AIPS2_BASE_ADDR + 0x000c8000) +#define MX50_SSI1_BASE_ADDR (MX50_AIPS2_BASE_ADDR + 0x000cc000) +#define MX50_AUDMUX_BASE_ADDR (MX50_AIPS2_BASE_ADDR + 0x000d0000) +#define MX50_WEIM_BASE_ADDR (MX50_AIPS2_BASE_ADDR + 0x000d8000) +#define MX50_FEC_BASE_ADDR (MX50_AIPS2_BASE_ADDR + 0x000ec000) + +/* + * Memory regions and CS + */ +#define MX50_CSD0_BASE_ADDR 0x70000000 +#define MX50_CSD1_BASE_ADDR 0xb0000000 +#define MX50_CS0_BASE_ADDR 0xf0000000 + +#define MX50_IO_P2V(x) IMX_IO_P2V(x) +#define MX50_IO_ADDRESS(x) IOMEM(MX50_IO_P2V(x)) + +/* + * defines for SPBA modules + */ +#define MX50_SPBA_SDHC1 0x04 +#define MX50_SPBA_SDHC2 0x08 +#define MX50_SPBA_UART3 0x0c +#define MX50_SPBA_CSPI1 0x10 +#define MX50_SPBA_SSI2 0x14 +#define MX50_SPBA_SDHC3 0x20 +#define MX50_SPBA_SDHC4 0x24 +#define MX50_SPBA_SPDIF 0x28 +#define MX50_SPBA_ATA 0x30 +#define MX50_SPBA_SLIM 0x34 +#define MX50_SPBA_HSI2C 0x38 +#define MX50_SPBA_CTRL 0x3c + +/* + * DMA request assignments + */ +#define MX50_DMA_REQ_GPC 1 +#define MX50_DMA_REQ_ATA_UART4_RX 2 +#define MX50_DMA_REQ_ATA_UART4_TX 3 +#define MX50_DMA_REQ_CSPI1_RX 6 +#define MX50_DMA_REQ_CSPI1_TX 7 +#define MX50_DMA_REQ_CSPI2_RX 8 +#define MX50_DMA_REQ_CSPI2_TX 9 +#define MX50_DMA_REQ_I2C3_SDHC3 10 +#define MX50_DMA_REQ_SDHC4 11 +#define MX50_DMA_REQ_UART2_FIRI_RX 12 +#define MX50_DMA_REQ_UART2_FIRI_TX 13 +#define MX50_DMA_REQ_EXT0 14 +#define MX50_DMA_REQ_EXT1 15 +#define MX50_DMA_REQ_UART5_RX 16 +#define MX50_DMA_REQ_UART5_TX 17 +#define MX50_DMA_REQ_UART1_RX 18 +#define MX50_DMA_REQ_UART1_TX 19 +#define MX50_DMA_REQ_I2C1_SDHC1 20 +#define MX50_DMA_REQ_I2C2_SDHC2 21 +#define MX50_DMA_REQ_SSI2_RX2 22 +#define MX50_DMA_REQ_SSI2_TX2 23 +#define MX50_DMA_REQ_SSI2_RX1 24 +#define MX50_DMA_REQ_SSI2_TX1 25 +#define MX50_DMA_REQ_SSI1_RX2 26 +#define MX50_DMA_REQ_SSI1_TX2 27 +#define MX50_DMA_REQ_SSI1_RX1 28 +#define MX50_DMA_REQ_SSI1_TX1 29 +#define MX50_DMA_REQ_CSPI_RX 38 +#define MX50_DMA_REQ_CSPI_TX 39 +#define MX50_DMA_REQ_UART3_RX 42 +#define MX50_DMA_REQ_UART3_TX 43 + +/* + * Interrupt numbers + */ +#define MX50_INT_MMC_SDHC1 1 +#define MX50_INT_MMC_SDHC2 2 +#define MX50_INT_MMC_SDHC3 3 +#define MX50_INT_MMC_SDHC4 4 +#define MX50_INT_DAP 5 +#define MX50_INT_SDMA 6 +#define MX50_INT_IOMUX 7 +#define MX50_INT_UART4 13 +#define MX50_INT_USB_H1 14 +#define MX50_INT_USB_OTG 18 +#define MX50_INT_DATABAHN 19 +#define MX50_INT_ELCDIF 20 +#define MX50_INT_EPXP 21 +#define MX50_INT_SRTC_NTZ 24 +#define MX50_INT_SRTC_TZ 25 +#define MX50_INT_EPDC 27 +#define MX50_INT_NIC 28 +#define MX50_INT_SSI1 29 +#define MX50_INT_SSI2 30 +#define MX50_INT_UART1 31 +#define MX50_INT_UART2 32 +#define MX50_INT_UART3 33 +#define MX50_INT_RESV34 34 +#define MX50_INT_RESV35 35 +#define MX50_INT_CSPI1 36 +#define MX50_INT_CSPI2 37 +#define MX50_INT_CSPI 38 +#define MX50_INT_GPT 39 +#define MX50_INT_EPIT1 40 +#define MX50_INT_GPIO1_INT7 42 +#define MX50_INT_GPIO1_INT6 43 +#define MX50_INT_GPIO1_INT5 44 +#define MX50_INT_GPIO1_INT4 45 +#define MX50_INT_GPIO1_INT3 46 +#define MX50_INT_GPIO1_INT2 47 +#define MX50_INT_GPIO1_INT1 48 +#define MX50_INT_GPIO1_INT0 49 +#define MX50_INT_GPIO1_LOW 50 +#define MX50_INT_GPIO1_HIGH 51 +#define MX50_INT_GPIO2_LOW 52 +#define MX50_INT_GPIO2_HIGH 53 +#define MX50_INT_GPIO3_LOW 54 +#define MX50_INT_GPIO3_HIGH 55 +#define MX50_INT_GPIO4_LOW 56 +#define MX50_INT_GPIO4_HIGH 57 +#define MX50_INT_WDOG1 58 +#define MX50_INT_KPP 60 +#define MX50_INT_PWM1 61 +#define MX50_INT_I2C1 62 +#define MX50_INT_I2C2 63 +#define MX50_INT_I2C3 64 +#define MX50_INT_RESV65 65 +#define MX50_INT_DCDC 66 +#define MX50_INT_THERMAL_ALARM 67 +#define MX50_INT_ANA3 68 +#define MX50_INT_ANA4 69 +#define MX50_INT_CCM1 71 +#define MX50_INT_CCM2 72 +#define MX50_INT_GPC1 73 +#define MX50_INT_GPC2 74 +#define MX50_INT_SRC 75 +#define MX50_INT_NM 76 +#define MX50_INT_PMU 77 +#define MX50_INT_CTI_IRQ 78 +#define MX50_INT_CTI1_TG0 79 +#define MX50_INT_CTI1_TG1 80 +#define MX50_INT_GPU2_IRQ 84 +#define MX50_INT_GPU2_BUSY 85 +#define MX50_INT_UART5 86 +#define MX50_INT_FEC 87 +#define MX50_INT_OWIRE 88 +#define MX50_INT_CTI1_TG2 89 +#define MX50_INT_SJC 90 +#define MX50_INT_DCP_CHAN1_3 91 +#define MX50_INT_DCP_CHAN0 92 +#define MX50_INT_PWM2 94 +#define MX50_INT_RNGB 97 +#define MX50_INT_CTI1_TG3 98 +#define MX50_INT_RAWNAND_BCH 100 +#define MX50_INT_RAWNAND_GPMI 102 +#define MX50_INT_GPIO5_LOW 103 +#define MX50_INT_GPIO5_HIGH 104 +#define MX50_INT_GPIO6_LOW 105 +#define MX50_INT_GPIO6_HIGH 106 +#define MX50_INT_MSHC 109 +#define MX50_INT_APBHDMA_CHAN0 110 +#define MX50_INT_APBHDMA_CHAN1 111 +#define MX50_INT_APBHDMA_CHAN2 112 +#define MX50_INT_APBHDMA_CHAN3 113 +#define MX50_INT_APBHDMA_CHAN4 114 +#define MX50_INT_APBHDMA_CHAN5 115 +#define MX50_INT_APBHDMA_CHAN6 116 +#define MX50_INT_APBHDMA_CHAN7 117 + +#endif /* ifndef __MACH_MX50_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/mx51.h b/arch/arm/plat-mxc/include/mach/mx51.h index 2af7a1056fc..873807f96d7 100644 --- a/arch/arm/plat-mxc/include/mach/mx51.h +++ b/arch/arm/plat-mxc/include/mach/mx51.h @@ -2,31 +2,6 @@ #define __MACH_MX51_H__ /* - * MX51 memory map: - * - * - * Virt Phys Size What - * --------------------------------------------------------------------------- - * fa3e0000 1ffe0000 128K IRAM (SCCv2 RAM) - * 30000000 256M GPU - * 40000000 512M IPU - * fa200000 60000000 1M DEBUG - * fb100000 70000000 1M SPBA 0 - * fb000000 73f00000 1M AIPS 1 - * fb200000 83f00000 1M AIPS 2 - * 8fffc000 16K TZIC (interrupt controller) - * 90000000 256M CSD0 SDRAM/DDR - * a0000000 256M CSD1 SDRAM/DDR - * b0000000 128M CS0 Flash - * b8000000 128M CS1 Flash - * c0000000 128M CS2 Flash - * c8000000 64M CS3 Flash - * cc000000 32M CS4 SRAM - * ce000000 32M CS5 SRAM - * cfff0000 64K NFC (NAND Flash AXI) - */ - -/* * IROM */ #define MX51_IROM_BASE_ADDR 0x0 @@ -36,7 +11,6 @@ * IRAM */ #define MX51_IRAM_BASE_ADDR 0x1ffe0000 /* internal ram */ -#define MX51_IRAM_BASE_ADDR_VIRT 0xfa3e0000 #define MX51_IRAM_PARTITIONS 16 #define MX51_IRAM_SIZE (MX51_IRAM_PARTITIONS * SZ_8K) /* 128KB */ @@ -45,7 +19,6 @@ #define MX51_IPU_CTRL_BASE_ADDR 0x40000000 #define MX51_DEBUG_BASE_ADDR 0x60000000 -#define MX51_DEBUG_BASE_ADDR_VIRT 0xfa200000 #define MX51_DEBUG_SIZE SZ_1M #define MX51_ETB_BASE_ADDR (MX51_DEBUG_BASE_ADDR + 0x01000) @@ -61,7 +34,6 @@ * SPBA global module enabled #0 */ #define MX51_SPBA0_BASE_ADDR 0x70000000 -#define MX51_SPBA0_BASE_ADDR_VIRT 0xfb100000 #define MX51_SPBA0_SIZE SZ_1M #define MX51_ESDHC1_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x04000) @@ -81,7 +53,6 @@ * AIPS 1 */ #define MX51_AIPS1_BASE_ADDR 0x73f00000 -#define MX51_AIPS1_BASE_ADDR_VIRT 0xfb000000 #define MX51_AIPS1_SIZE SZ_1M #define MX51_OTG_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x80000) @@ -90,7 +61,7 @@ #define MX51_GPIO3_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x8c000) #define MX51_GPIO4_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x90000) #define MX51_KPP_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x94000) -#define MX51_WDOG_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x98000) +#define MX51_WDOG1_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x98000) #define MX51_WDOG2_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x9c000) #define MX51_GPT1_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0xa0000) #define MX51_SRTC_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0xa4000) @@ -109,7 +80,6 @@ * AIPS 2 */ #define MX51_AIPS2_BASE_ADDR 0x83f00000 -#define MX51_AIPS2_BASE_ADDR_VIRT 0xfb200000 #define MX51_AIPS2_SIZE SZ_1M #define MX51_PLL1_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x80000) @@ -139,7 +109,7 @@ #define MX51_MIPI_HSC_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xdc000) #define MX51_ATA_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xe0000) #define MX51_SIM_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xe4000) -#define MX51_SSI3BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xe8000) +#define MX51_SSI3_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xe8000) #define MX51_FEC_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xec000) #define MX51_TVE_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xf0000) #define MX51_VPU_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xf4000) @@ -163,16 +133,8 @@ #define MX51_GPU2D_BASE_ADDR 0xd0000000 #define MX51_TZIC_BASE_ADDR 0xe0000000 -#define MX51_IO_ADDRESS(x) ( \ - IMX_IO_ADDRESS(x, MX51_IRAM) ?: \ - IMX_IO_ADDRESS(x, MX51_DEBUG) ?: \ - IMX_IO_ADDRESS(x, MX51_SPBA0) ?: \ - IMX_IO_ADDRESS(x, MX51_AIPS1) ?: \ - IMX_IO_ADDRESS(x, MX51_AIPS2)) - -/* This is currently used in <mach/debug-macro.S>, but should go away */ -#define MX51_AIPS1_IO_ADDRESS(x) \ - (((x) - MX51_AIPS1_BASE_ADDR) + MX51_AIPS1_BASE_ADDR_VIRT) +#define MX51_IO_P2V(x) IMX_IO_P2V(x) +#define MX51_IO_ADDRESS(x) IOMEM(MX51_IO_P2V(x)) /* * defines for SPBA modules @@ -261,9 +223,9 @@ #define MX51_DMA_REQ_EMI_WR 32 #define MX51_DMA_REQ_CTI2_1 33 #define MX51_DMA_REQ_EPIT2 34 -#define MX51_DMA_REQ_SSI3_RX2 35 +#define MX51_DMA_REQ_SSI3_RX1 35 #define MX51_DMA_REQ_IPU 36 -#define MX51_DMA_REQ_SSI3_TX2 37 +#define MX51_DMA_REQ_SSI3_TX1 37 #define MX51_DMA_REQ_CSPI_RX 38 #define MX51_DMA_REQ_CSPI_TX 39 #define MX51_DMA_REQ_SDHC3 40 @@ -272,8 +234,8 @@ #define MX51_DMA_REQ_UART3_RX 43 #define MX51_DMA_REQ_UART3_TX 44 #define MX51_DMA_REQ_SPDIF 45 -#define MX51_DMA_REQ_SSI3_RX1 46 -#define MX51_DMA_REQ_SSI3_TX1 47 +#define MX51_DMA_REQ_SSI3_RX0 46 +#define MX51_DMA_REQ_SSI3_TX0 47 /* * Interrupt numbers @@ -289,8 +251,8 @@ #define MX51_MXC_INT_IOMUX 7 #define MX51_INT_NFC 8 #define MX51_MXC_INT_VPU 9 -#define MX51_MXC_INT_IPU_ERR 10 -#define MX51_MXC_INT_IPU_SYN 11 +#define MX51_INT_IPU_ERR 10 +#define MX51_INT_IPU_SYN 11 #define MX51_MXC_INT_GPU 12 #define MX51_MXC_INT_RESV13 13 #define MX51_MXC_INT_USB_H1 14 @@ -375,7 +337,7 @@ #define MX51_MXC_INT_FIRI 93 #define MX51_MXC_INT_PWM2 94 #define MX51_MXC_INT_SLIM_EXP 95 -#define MX51_MXC_INT_SSI3 96 +#define MX51_INT_SSI3 96 #define MX51_MXC_INT_EMI_BOOT 97 #define MX51_MXC_INT_CTI1_TG3 98 #define MX51_MXC_INT_SMC_RX 99 @@ -383,19 +345,6 @@ #define MX51_MXC_INT_EMI_NFC 101 #define MX51_MXC_INT_GPU_IDLE 102 -/* silicon revisions specific to i.MX51 */ -#define MX51_CHIP_REV_1_0 0x10 -#define MX51_CHIP_REV_1_1 0x11 -#define MX51_CHIP_REV_1_2 0x12 -#define MX51_CHIP_REV_1_3 0x13 -#define MX51_CHIP_REV_2_0 0x20 -#define MX51_CHIP_REV_2_1 0x21 -#define MX51_CHIP_REV_2_2 0x22 -#define MX51_CHIP_REV_2_3 0x23 -#define MX51_CHIP_REV_3_0 0x30 -#define MX51_CHIP_REV_3_1 0x31 -#define MX51_CHIP_REV_3_2 0x32 - #if !defined(__ASSEMBLY__) && !defined(__MXC_BOOT_UNCOMPRESS) extern int mx51_revision(void); #endif diff --git a/arch/arm/plat-mxc/include/mach/mx53.h b/arch/arm/plat-mxc/include/mach/mx53.h new file mode 100644 index 00000000000..9577cdbf7fa --- /dev/null +++ b/arch/arm/plat-mxc/include/mach/mx53.h @@ -0,0 +1,353 @@ +#ifndef __MACH_MX53_H__ +#define __MACH_MX53_H__ + +/* + * IROM + */ +#define MX53_IROM_BASE_ADDR 0x0 +#define MX53_IROM_SIZE SZ_64K + +/* TZIC */ +#define MX53_TZIC_BASE_ADDR 0x0FFFC000 + +/* + * AHCI SATA + */ +#define MX53_SATA_BASE_ADDR 0x10000000 + +/* + * NFC + */ +#define MX53_NFC_AXI_BASE_ADDR 0xF7FF0000 /* NAND flash AXI */ +#define MX53_NFC_AXI_SIZE SZ_64K + +/* + * IRAM + */ +#define MX53_IRAM_BASE_ADDR 0xF8000000 /* internal ram */ +#define MX53_IRAM_PARTITIONS 16 +#define MX53_IRAM_SIZE (MX53_IRAM_PARTITIONS * SZ_8K) /* 128KB */ + +/* + * Graphics Memory of GPU + */ +#define MX53_IPU_CTRL_BASE_ADDR 0x18000000 +#define MX53_GPU2D_BASE_ADDR 0x20000000 +#define MX53_GPU_BASE_ADDR 0x30000000 +#define MX53_GPU_GMEM_BASE_ADDR 0xF8020000 + +#define MX53_DEBUG_BASE_ADDR 0x40000000 +#define MX53_DEBUG_SIZE SZ_1M +#define MX53_ETB_BASE_ADDR (MX53_DEBUG_BASE_ADDR + 0x00001000) +#define MX53_ETM_BASE_ADDR (MX53_DEBUG_BASE_ADDR + 0x00002000) +#define MX53_TPIU_BASE_ADDR (MX53_DEBUG_BASE_ADDR + 0x00003000) +#define MX53_CTI0_BASE_ADDR (MX53_DEBUG_BASE_ADDR + 0x00004000) +#define MX53_CTI1_BASE_ADDR (MX53_DEBUG_BASE_ADDR + 0x00005000) +#define MX53_CTI2_BASE_ADDR (MX53_DEBUG_BASE_ADDR + 0x00006000) +#define MX53_CTI3_BASE_ADDR (MX53_DEBUG_BASE_ADDR + 0x00007000) +#define MX53_CORTEX_DBG_BASE_ADDR (MX53_DEBUG_BASE_ADDR + 0x00008000) + +/* + * SPBA global module enabled #0 + */ +#define MX53_SPBA0_BASE_ADDR 0x50000000 +#define MX53_SPBA0_SIZE SZ_1M + +#define MX53_MMC_SDHC1_BASE_ADDR (MX53_SPBA0_BASE_ADDR + 0x00004000) +#define MX53_MMC_SDHC2_BASE_ADDR (MX53_SPBA0_BASE_ADDR + 0x00008000) +#define MX53_UART3_BASE_ADDR (MX53_SPBA0_BASE_ADDR + 0x0000C000) +#define MX53_CSPI1_BASE_ADDR (MX53_SPBA0_BASE_ADDR + 0x00010000) +#define MX53_SSI2_BASE_ADDR (MX53_SPBA0_BASE_ADDR + 0x00014000) +#define MX53_MMC_SDHC3_BASE_ADDR (MX53_SPBA0_BASE_ADDR + 0x00020000) +#define MX53_MMC_SDHC4_BASE_ADDR (MX53_SPBA0_BASE_ADDR + 0x00024000) +#define MX53_SPDIF_BASE_ADDR (MX53_SPBA0_BASE_ADDR + 0x00028000) +#define MX53_ASRC_BASE_ADDR (MX53_SPBA0_BASE_ADDR + 0x0002C000) +#define MX53_ATA_DMA_BASE_ADDR (MX53_SPBA0_BASE_ADDR + 0x00030000) +#define MX53_SLIM_DMA_BASE_ADDR (MX53_SPBA0_BASE_ADDR + 0x00034000) +#define MX53_HSI2C_DMA_BASE_ADDR (MX53_SPBA0_BASE_ADDR + 0x00038000) +#define MX53_SPBA_CTRL_BASE_ADDR (MX53_SPBA0_BASE_ADDR + 0x0003C000) + +/* + * AIPS 1 + */ +#define MX53_AIPS1_BASE_ADDR 0x53F00000 +#define MX53_AIPS1_SIZE SZ_1M + +#define MX53_OTG_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x00080000) +#define MX53_GPIO1_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x00084000) +#define MX53_GPIO2_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x00088000) +#define MX53_GPIO3_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x0008C000) +#define MX53_GPIO4_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x00090000) +#define MX53_KPP_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x00094000) +#define MX53_WDOG_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x00098000) +#define MX53_WDOG2_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x0009C000) +#define MX53_GPT1_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x000A0000) +#define MX53_SRTC_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x000A4000) +#define MX53_IOMUXC_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x000A8000) +#define MX53_EPIT1_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x000AC000) +#define MX53_EPIT2_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x000B0000) +#define MX53_PWM1_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x000B4000) +#define MX53_PWM2_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x000B8000) +#define MX53_UART1_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x000BC000) +#define MX53_UART2_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x000C0000) +#define MX53_SRC_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x000D0000) +#define MX53_CCM_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x000D4000) +#define MX53_GPC_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x000D8000) +#define MX53_GPIO5_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x000DC000) +#define MX53_GPIO6_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x000E0000) +#define MX53_GPIO7_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x000E4000) +#define MX53_ATA_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x000E8000) +#define MX53_I2C3_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x000EC000) +#define MX53_UART4_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x000F0000) + +/* + * AIPS 2 + */ +#define MX53_AIPS2_BASE_ADDR 0x63F00000 +#define MX53_AIPS2_SIZE SZ_1M + +#define MX53_PLL1_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x00080000) +#define MX53_PLL2_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x00084000) +#define MX53_PLL3_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x00088000) +#define MX53_PLL4_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x0008C000) +#define MX53_UART5_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x00090000) +#define MX53_AHBMAX_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x00094000) +#define MX53_IIM_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x00098000) +#define MX53_CSU_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x0009C000) +#define MX53_ARM_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000A0000) +#define MX53_OWIRE_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000A4000) +#define MX53_FIRI_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000A8000) +#define MX53_CSPI2_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000AC000) +#define MX53_SDMA_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000B0000) +#define MX53_SCC_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000B4000) +#define MX53_ROMCP_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000B8000) +#define MX53_RTIC_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000BC000) +#define MX53_CSPI3_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000C0000) +#define MX53_I2C2_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000C4000) +#define MX53_I2C1_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000C8000) +#define MX53_SSI1_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000CC000) +#define MX53_AUDMUX_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000D0000) +#define MX53_RTC_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000D4000) +#define MX53_M4IF_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000D8000) +#define MX53_ESDCTL_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000D9000) +#define MX53_WEIM_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000DA000) +#define MX53_NFC_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000DB000) +#define MX53_EMI_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000DBF00) +#define MX53_MIPI_HSC_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000DC000) +#define MX53_MLB_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000E4000) +#define MX53_SSI3_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000E8000) +#define MX53_MXC_FEC_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000EC000) +#define MX53_TVE_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000F0000) +#define MX53_VPU_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000F4000) +#define MX53_SAHARA_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000F8000) +#define MX53_PTP_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000FC000) + +/* + * Memory regions and CS + */ +#define MX53_CSD0_BASE_ADDR 0x90000000 +#define MX53_CSD1_BASE_ADDR 0xA0000000 +#define MX53_CS0_BASE_ADDR 0xB0000000 +#define MX53_CS1_BASE_ADDR 0xB8000000 +#define MX53_CS2_BASE_ADDR 0xC0000000 +#define MX53_CS3_BASE_ADDR 0xC8000000 +#define MX53_CS4_BASE_ADDR 0xCC000000 +#define MX53_CS5_BASE_ADDR 0xCE000000 + +#define MX53_IO_P2V(x) IMX_IO_P2V(x) +#define MX53_IO_ADDRESS(x) IOMEM(MX53_IO_P2V(x)) + +/* + * defines for SPBA modules + */ +#define MX53_SPBA_SDHC1 0x04 +#define MX53_SPBA_SDHC2 0x08 +#define MX53_SPBA_UART3 0x0C +#define MX53_SPBA_CSPI1 0x10 +#define MX53_SPBA_SSI2 0x14 +#define MX53_SPBA_SDHC3 0x20 +#define MX53_SPBA_SDHC4 0x24 +#define MX53_SPBA_SPDIF 0x28 +#define MX53_SPBA_ATA 0x30 +#define MX53_SPBA_SLIM 0x34 +#define MX53_SPBA_HSI2C 0x38 +#define MX53_SPBA_CTRL 0x3C + +/* + * DMA request assignments + */ +#define MX53_DMA_REQ_SSI3_TX1 47 +#define MX53_DMA_REQ_SSI3_RX1 46 +#define MX53_DMA_REQ_SSI3_TX2 45 +#define MX53_DMA_REQ_SSI3_RX2 44 +#define MX53_DMA_REQ_UART3_TX 43 +#define MX53_DMA_REQ_UART3_RX 42 +#define MX53_DMA_REQ_ESAI_TX 41 +#define MX53_DMA_REQ_ESAI_RX 40 +#define MX53_DMA_REQ_CSPI_TX 39 +#define MX53_DMA_REQ_CSPI_RX 38 +#define MX53_DMA_REQ_ASRC_DMA6 37 +#define MX53_DMA_REQ_ASRC_DMA5 36 +#define MX53_DMA_REQ_ASRC_DMA4 35 +#define MX53_DMA_REQ_ASRC_DMA3 34 +#define MX53_DMA_REQ_ASRC_DMA2 33 +#define MX53_DMA_REQ_ASRC_DMA1 32 +#define MX53_DMA_REQ_EMI_WR 31 +#define MX53_DMA_REQ_EMI_RD 30 +#define MX53_DMA_REQ_SSI1_TX1 29 +#define MX53_DMA_REQ_SSI1_RX1 28 +#define MX53_DMA_REQ_SSI1_TX2 27 +#define MX53_DMA_REQ_SSI1_RX2 26 +#define MX53_DMA_REQ_SSI2_TX1 25 +#define MX53_DMA_REQ_SSI2_RX1 24 +#define MX53_DMA_REQ_SSI2_TX2 23 +#define MX53_DMA_REQ_SSI2_RX2 22 +#define MX53_DMA_REQ_I2C2_SDHC2 21 +#define MX53_DMA_REQ_I2C1_SDHC1 20 +#define MX53_DMA_REQ_UART1_TX 19 +#define MX53_DMA_REQ_UART1_RX 18 +#define MX53_DMA_REQ_UART5_TX 17 +#define MX53_DMA_REQ_UART5_RX 16 +#define MX53_DMA_REQ_SPDIF_TX 15 +#define MX53_DMA_REQ_SPDIF_RX 14 +#define MX53_DMA_REQ_UART2_FIRI_TX 13 +#define MX53_DMA_REQ_UART2_FIRI_RX 12 +#define MX53_DMA_REQ_SDHC4 11 +#define MX53_DMA_REQ_I2C3_SDHC3 10 +#define MX53_DMA_REQ_CSPI2_TX 9 +#define MX53_DMA_REQ_CSPI2_RX 8 +#define MX53_DMA_REQ_CSPI1_TX 7 +#define MX53_DMA_REQ_CSPI1_RX 6 +#define MX53_DMA_REQ_IPU 5 +#define MX53_DMA_REQ_ATA_TX_END 4 +#define MX53_DMA_REQ_ATA_UART4_TX 3 +#define MX53_DMA_REQ_ATA_UART4_RX 2 +#define MX53_DMA_REQ_GPC 1 +#define MX53_DMA_REQ_VPU 0 + +/* + * Interrupt numbers + */ +#define MX53_INT_RESV0 0 +#define MX53_INT_MMC_SDHC1 1 +#define MX53_INT_MMC_SDHC2 2 +#define MX53_INT_MMC_SDHC3 3 +#define MX53_INT_MMC_SDHC4 4 +#define MX53_INT_RESV5 5 +#define MX53_INT_SDMA 6 +#define MX53_INT_IOMUX 7 +#define MX53_INT_NFC 8 +#define MX53_INT_VPU 9 +#define MX53_INT_IPU_ERR 10 +#define MX53_INT_IPU_SYN 11 +#define MX53_INT_GPU 12 +#define MX53_INT_RESV13 13 +#define MX53_INT_USB_H1 14 +#define MX53_INT_EMI 15 +#define MX53_INT_USB_H2 16 +#define MX53_INT_USB_H3 17 +#define MX53_INT_USB_OTG 18 +#define MX53_INT_SAHARA_H0 19 +#define MX53_INT_SAHARA_H1 20 +#define MX53_INT_SCC_SMN 21 +#define MX53_INT_SCC_STZ 22 +#define MX53_INT_SCC_SCM 23 +#define MX53_INT_SRTC_NTZ 24 +#define MX53_INT_SRTC_TZ 25 +#define MX53_INT_RTIC 26 +#define MX53_INT_CSU 27 +#define MX53_INT_SATA 28 +#define MX53_INT_SSI1 29 +#define MX53_INT_SSI2 30 +#define MX53_INT_UART1 31 +#define MX53_INT_UART2 32 +#define MX53_INT_UART3 33 +#define MX53_INT_RESV34 34 +#define MX53_INT_RESV35 35 +#define MX53_INT_CSPI1 36 +#define MX53_INT_CSPI2 37 +#define MX53_INT_CSPI 38 +#define MX53_INT_GPT 39 +#define MX53_INT_EPIT1 40 +#define MX53_INT_EPIT2 41 +#define MX53_INT_GPIO1_INT7 42 +#define MX53_INT_GPIO1_INT6 43 +#define MX53_INT_GPIO1_INT5 44 +#define MX53_INT_GPIO1_INT4 45 +#define MX53_INT_GPIO1_INT3 46 +#define MX53_INT_GPIO1_INT2 47 +#define MX53_INT_GPIO1_INT1 48 +#define MX53_INT_GPIO1_INT0 49 +#define MX53_INT_GPIO1_LOW 50 +#define MX53_INT_GPIO1_HIGH 51 +#define MX53_INT_GPIO2_LOW 52 +#define MX53_INT_GPIO2_HIGH 53 +#define MX53_INT_GPIO3_LOW 54 +#define MX53_INT_GPIO3_HIGH 55 +#define MX53_INT_GPIO4_LOW 56 +#define MX53_INT_GPIO4_HIGH 57 +#define MX53_INT_WDOG1 58 +#define MX53_INT_WDOG2 59 +#define MX53_INT_KPP 60 +#define MX53_INT_PWM1 61 +#define MX53_INT_I2C1 62 +#define MX53_INT_I2C2 63 +#define MX53_INT_I2C3 64 +#define MX53_INT_RESV65 65 +#define MX53_INT_RESV66 66 +#define MX53_INT_SPDIF 67 +#define MX53_INT_SIM_DAT 68 +#define MX53_INT_IIM 69 +#define MX53_INT_ATA 70 +#define MX53_INT_CCM1 71 +#define MX53_INT_CCM2 72 +#define MX53_INT_GPC1 73 +#define MX53_INT_GPC2 74 +#define MX53_INT_SRC 75 +#define MX53_INT_NM 76 +#define MX53_INT_PMU 77 +#define MX53_INT_CTI_IRQ 78 +#define MX53_INT_CTI1_TG0 79 +#define MX53_INT_CTI1_TG1 80 +#define MX53_INT_ESAI 81 +#define MX53_INT_CAN1 82 +#define MX53_INT_CAN2 83 +#define MX53_INT_GPU2_IRQ 84 +#define MX53_INT_GPU2_BUSY 85 +#define MX53_INT_RESV86 86 +#define MX53_INT_FEC 87 +#define MX53_INT_OWIRE 88 +#define MX53_INT_CTI1_TG2 89 +#define MX53_INT_SJC 90 +#define MX53_INT_TVE 92 +#define MX53_INT_FIRI 93 +#define MX53_INT_PWM2 94 +#define MX53_INT_SLIM_EXP 95 +#define MX53_INT_SSI3 96 +#define MX53_INT_EMI_BOOT 97 +#define MX53_INT_CTI1_TG3 98 +#define MX53_INT_SMC_RX 99 +#define MX53_INT_VPU_IDLE 100 +#define MX53_INT_EMI_NFC 101 +#define MX53_INT_GPU_IDLE 102 +#define MX53_INT_GPIO5_LOW 103 +#define MX53_INT_GPIO5_HIGH 104 +#define MX53_INT_GPIO6_LOW 105 +#define MX53_INT_GPIO6_HIGH 106 +#define MX53_INT_GPIO7_LOW 107 +#define MX53_INT_GPIO7_HIGH 108 + +/* silicon revisions specific to i.MX53 */ +#define MX53_CHIP_REV_1_0 0x10 +#define MX53_CHIP_REV_1_1 0x11 +#define MX53_CHIP_REV_1_2 0x12 +#define MX53_CHIP_REV_1_3 0x13 +#define MX53_CHIP_REV_2_0 0x20 +#define MX53_CHIP_REV_2_1 0x21 +#define MX53_CHIP_REV_2_2 0x22 +#define MX53_CHIP_REV_2_3 0x23 +#define MX53_CHIP_REV_3_0 0x30 +#define MX53_CHIP_REV_3_1 0x31 +#define MX53_CHIP_REV_3_2 0x32 + +#endif /* ifndef __MACH_MX53_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/mxc.h b/arch/arm/plat-mxc/include/mach/mxc.h index a42c7207082..04c7a26b1f2 100644 --- a/arch/arm/plat-mxc/include/mach/mxc.h +++ b/arch/arm/plat-mxc/include/mach/mxc.h @@ -32,9 +32,25 @@ #define MXC_CPU_MX27 27 #define MXC_CPU_MX31 31 #define MXC_CPU_MX35 35 +#define MXC_CPU_MX50 50 #define MXC_CPU_MX51 51 +#define MXC_CPU_MX53 53 #define MXC_CPU_MXC91231 91231 +#define IMX_CHIP_REVISION_1_0 0x10 +#define IMX_CHIP_REVISION_1_1 0x11 +#define IMX_CHIP_REVISION_1_2 0x12 +#define IMX_CHIP_REVISION_1_3 0x13 +#define IMX_CHIP_REVISION_2_0 0x20 +#define IMX_CHIP_REVISION_2_1 0x21 +#define IMX_CHIP_REVISION_2_2 0x22 +#define IMX_CHIP_REVISION_2_3 0x23 +#define IMX_CHIP_REVISION_3_0 0x30 +#define IMX_CHIP_REVISION_3_1 0x31 +#define IMX_CHIP_REVISION_3_2 0x32 +#define IMX_CHIP_REVISION_3_3 0x33 +#define IMX_CHIP_REVISION_UNKNOWN 0xff + #ifndef __ASSEMBLY__ extern unsigned int __mxc_cpu_type; #endif @@ -111,7 +127,19 @@ extern unsigned int __mxc_cpu_type; # define cpu_is_mx35() (0) #endif -#ifdef CONFIG_ARCH_MX5 +#ifdef CONFIG_ARCH_MX50 +# ifdef mxc_cpu_type +# undef mxc_cpu_type +# define mxc_cpu_type __mxc_cpu_type +# else +# define mxc_cpu_type MXC_CPU_MX50 +# endif +# define cpu_is_mx50() (mxc_cpu_type == MXC_CPU_MX50) +#else +# define cpu_is_mx50() (0) +#endif + +#ifdef CONFIG_ARCH_MX51 # ifdef mxc_cpu_type # undef mxc_cpu_type # define mxc_cpu_type __mxc_cpu_type @@ -123,6 +151,18 @@ extern unsigned int __mxc_cpu_type; # define cpu_is_mx51() (0) #endif +#ifdef CONFIG_ARCH_MX53 +# ifdef mxc_cpu_type +# undef mxc_cpu_type +# define mxc_cpu_type __mxc_cpu_type +# else +# define mxc_cpu_type MXC_CPU_MX53 +# endif +# define cpu_is_mx53() (mxc_cpu_type == MXC_CPU_MX53) +#else +# define cpu_is_mx53() (0) +#endif + #ifdef CONFIG_ARCH_MXC91231 # ifdef mxc_cpu_type # undef mxc_cpu_type diff --git a/arch/arm/plat-mxc/include/mach/mxc91231.h b/arch/arm/plat-mxc/include/mach/mxc91231.h index 0ca3101ebf3..765190fe633 100644 --- a/arch/arm/plat-mxc/include/mach/mxc91231.h +++ b/arch/arm/plat-mxc/include/mach/mxc91231.h @@ -21,14 +21,12 @@ * L2CC */ #define MXC91231_L2CC_BASE_ADDR 0x30000000 -#define MXC91231_L2CC_BASE_ADDR_VIRT 0xF9000000 #define MXC91231_L2CC_SIZE SZ_64K /* * AIPS 1 */ #define MXC91231_AIPS1_BASE_ADDR 0x43F00000 -#define MXC91231_AIPS1_BASE_ADDR_VIRT 0xFC000000 #define MXC91231_AIPS1_SIZE SZ_1M #define MXC91231_AIPS1_CTRL_BASE_ADDR MXC91231_AIPS1_BASE_ADDR @@ -53,7 +51,6 @@ * AIPS 2 */ #define MXC91231_AIPS2_BASE_ADDR 0x53F00000 -#define MXC91231_AIPS2_BASE_ADDR_VIRT 0xFC100000 #define MXC91231_AIPS2_SIZE SZ_1M #define MXC91231_GEMK_BASE_ADDR (MXC91231_AIPS2_BASE_ADDR + 0x8C000) @@ -79,7 +76,6 @@ * SPBA global module 0 */ #define MXC91231_SPBA0_BASE_ADDR 0x50000000 -#define MXC91231_SPBA0_BASE_ADDR_VIRT 0xFC200000 #define MXC91231_SPBA0_SIZE SZ_1M #define MXC91231_MMC_SDHC1_BASE_ADDR (MXC91231_SPBA0_BASE_ADDR + 0x04000) @@ -109,7 +105,6 @@ * SPBA global module 1 */ #define MXC91231_SPBA1_BASE_ADDR 0x52000000 -#define MXC91231_SPBA1_BASE_ADDR_VIRT 0xFC300000 #define MXC91231_SPBA1_SIZE SZ_1M #define MXC91231_MQSPI_BASE_ADDR (MXC91231_SPBA1_BASE_ADDR + 0x34000) @@ -144,18 +139,15 @@ * ROMP and AVIC */ #define MXC91231_ROMP_BASE_ADDR 0x60000000 -#define MXC91231_ROMP_BASE_ADDR_VIRT 0xFC400000 #define MXC91231_ROMP_SIZE SZ_64K #define MXC91231_AVIC_BASE_ADDR 0x68000000 -#define MXC91231_AVIC_BASE_ADDR_VIRT 0xFC410000 #define MXC91231_AVIC_SIZE SZ_64K /* * NAND, SDRAM, WEIM, M3IF, EMI controllers */ #define MXC91231_X_MEMC_BASE_ADDR 0xB8000000 -#define MXC91231_X_MEMC_BASE_ADDR_VIRT 0xFC420000 #define MXC91231_X_MEMC_SIZE SZ_64K #define MXC91231_NFC_BASE_ADDR (MXC91231_X_MEMC_BASE_ADDR + 0x0000) @@ -183,19 +175,10 @@ /* * This macro defines the physical to virtual address mapping for all the * peripheral modules. It is used by passing in the physical address as x - * and returning the virtual address. If the physical address is not mapped, - * it returns 0. + * and returning the virtual address. */ - -#define MXC91231_IO_ADDRESS(x) ( \ - IMX_IO_ADDRESS(x, MXC91231_L2CC) ?: \ - IMX_IO_ADDRESS(x, MXC91231_X_MEMC) ?: \ - IMX_IO_ADDRESS(x, MXC91231_ROMP) ?: \ - IMX_IO_ADDRESS(x, MXC91231_AVIC) ?: \ - IMX_IO_ADDRESS(x, MXC91231_AIPS1) ?: \ - IMX_IO_ADDRESS(x, MXC91231_SPBA0) ?: \ - IMX_IO_ADDRESS(x, MXC91231_SPBA1) ?: \ - IMX_IO_ADDRESS(x, MXC91231_AIPS2)) +#define MXC91231_IO_P2V(x) IMX_IO_P2V(x) +#define MXC91231_IO_ADDRESS(x) IOMEM(MXC91231_IO_P2V(x)) /* * Interrupt numbers diff --git a/arch/arm/plat-mxc/include/mach/mxc_ehci.h b/arch/arm/plat-mxc/include/mach/mxc_ehci.h index 7fc5f994619..a523a407929 100644 --- a/arch/arm/plat-mxc/include/mach/mxc_ehci.h +++ b/arch/arm/plat-mxc/include/mach/mxc_ehci.h @@ -31,6 +31,7 @@ #define MXC_USBCTRL_OFFSET 0 #define MXC_USB_PHY_CTR_FUNC_OFFSET 0x8 #define MXC_USB_PHY_CTR_FUNC2_OFFSET 0xc +#define MXC_USBH2CTRL_OFFSET 0x14 #define MX5_USBOTHER_REGS_OFFSET 0x800 diff --git a/arch/arm/plat-mxc/include/mach/sdma.h b/arch/arm/plat-mxc/include/mach/sdma.h index 9be112227ac..913e0432e40 100644 --- a/arch/arm/plat-mxc/include/mach/sdma.h +++ b/arch/arm/plat-mxc/include/mach/sdma.h @@ -2,16 +2,62 @@ #define __MACH_MXC_SDMA_H__ /** + * struct sdma_script_start_addrs - SDMA script start pointers + * + * start addresses of the different functions in the physical + * address space of the SDMA engine. + */ +struct sdma_script_start_addrs { + s32 ap_2_ap_addr; + s32 ap_2_bp_addr; + s32 ap_2_ap_fixed_addr; + s32 bp_2_ap_addr; + s32 loopback_on_dsp_side_addr; + s32 mcu_interrupt_only_addr; + s32 firi_2_per_addr; + s32 firi_2_mcu_addr; + s32 per_2_firi_addr; + s32 mcu_2_firi_addr; + s32 uart_2_per_addr; + s32 uart_2_mcu_addr; + s32 per_2_app_addr; + s32 mcu_2_app_addr; + s32 per_2_per_addr; + s32 uartsh_2_per_addr; + s32 uartsh_2_mcu_addr; + s32 per_2_shp_addr; + s32 mcu_2_shp_addr; + s32 ata_2_mcu_addr; + s32 mcu_2_ata_addr; + s32 app_2_per_addr; + s32 app_2_mcu_addr; + s32 shp_2_per_addr; + s32 shp_2_mcu_addr; + s32 mshc_2_mcu_addr; + s32 mcu_2_mshc_addr; + s32 spdif_2_mcu_addr; + s32 mcu_2_spdif_addr; + s32 asrc_2_mcu_addr; + s32 ext_mem_2_ipu_addr; + s32 descrambler_addr; + s32 dptc_dvfs_addr; + s32 utra_addr; + s32 ram_code_start_addr; +}; + +/** * struct sdma_platform_data - platform specific data for SDMA engine * * @sdma_version The version of this SDMA engine * @cpu_name used to generate the firmware name * @to_version CPU Tape out version + * @script_addrs SDMA scripts addresses in SDMA ROM */ struct sdma_platform_data { int sdma_version; char *cpu_name; int to_version; + struct sdma_script_start_addrs *script_addrs; }; #endif /* __MACH_MXC_SDMA_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/uncompress.h b/arch/arm/plat-mxc/include/mach/uncompress.h index 9dd9c2085aa..3a70ebf0477 100644 --- a/arch/arm/plat-mxc/include/mach/uncompress.h +++ b/arch/arm/plat-mxc/include/mach/uncompress.h @@ -63,6 +63,8 @@ static inline void flush(void) #define MX3X_UART1_BASE_ADDR 0x43F90000 #define MX3X_UART2_BASE_ADDR 0x43F94000 #define MX51_UART1_BASE_ADDR 0x73fbc000 +#define MX50_UART1_BASE_ADDR 0x53fbc000 +#define MX53_UART1_BASE_ADDR 0x53fbc000 static __inline__ void __arch_decomp_setup(unsigned long arch_id) { @@ -102,6 +104,12 @@ static __inline__ void __arch_decomp_setup(unsigned long arch_id) case MACH_TYPE_EUKREA_CPUIMX51SD: uart_base = MX51_UART1_BASE_ADDR; break; + case MACH_TYPE_MX50_RDP: + uart_base = MX50_UART1_BASE_ADDR; + break; + case MACH_TYPE_MX53_EVK: + uart_base = MX53_UART1_BASE_ADDR; + break; default: break; } diff --git a/arch/arm/plat-mxc/iomux-v3.c b/arch/arm/plat-mxc/iomux-v3.c index b318c6a222d..99a9cdb9d6b 100644 --- a/arch/arm/plat-mxc/iomux-v3.c +++ b/arch/arm/plat-mxc/iomux-v3.c @@ -32,31 +32,38 @@ static void __iomem *base; /* - * setups a single pad in the iomuxer + * configures a single pad in the iomuxer */ -int mxc_iomux_v3_setup_pad(struct pad_desc *pad) +int mxc_iomux_v3_setup_pad(iomux_v3_cfg_t pad) { - if (pad->mux_ctrl_ofs) - __raw_writel(pad->mux_mode, base + pad->mux_ctrl_ofs); + u32 mux_ctrl_ofs = (pad & MUX_CTRL_OFS_MASK) >> MUX_CTRL_OFS_SHIFT; + u32 mux_mode = (pad & MUX_MODE_MASK) >> MUX_MODE_SHIFT; + u32 sel_input_ofs = (pad & MUX_SEL_INPUT_OFS_MASK) >> MUX_SEL_INPUT_OFS_SHIFT; + u32 sel_input = (pad & MUX_SEL_INPUT_MASK) >> MUX_SEL_INPUT_SHIFT; + u32 pad_ctrl_ofs = (pad & MUX_PAD_CTRL_OFS_MASK) >> MUX_PAD_CTRL_OFS_SHIFT; + u32 pad_ctrl = (pad & MUX_PAD_CTRL_MASK) >> MUX_PAD_CTRL_SHIFT; - if (pad->select_input_ofs) - __raw_writel(pad->select_input, - base + pad->select_input_ofs); + if (mux_ctrl_ofs) + __raw_writel(mux_mode, base + mux_ctrl_ofs); + + if (sel_input_ofs) + __raw_writel(sel_input, base + sel_input_ofs); + + if (!(pad_ctrl & NO_PAD_CTRL) && pad_ctrl_ofs) + __raw_writel(pad_ctrl, base + pad_ctrl_ofs); - if (!(pad->pad_ctrl & NO_PAD_CTRL) && pad->pad_ctrl_ofs) - __raw_writel(pad->pad_ctrl, base + pad->pad_ctrl_ofs); return 0; } EXPORT_SYMBOL(mxc_iomux_v3_setup_pad); -int mxc_iomux_v3_setup_multiple_pads(struct pad_desc *pad_list, unsigned count) +int mxc_iomux_v3_setup_multiple_pads(iomux_v3_cfg_t *pad_list, unsigned count) { - struct pad_desc *p = pad_list; + iomux_v3_cfg_t *p = pad_list; int i; int ret; for (i = 0; i < count; i++) { - ret = mxc_iomux_v3_setup_pad(p); + ret = mxc_iomux_v3_setup_pad(*p); if (ret) return ret; p++; diff --git a/arch/arm/plat-mxc/irq-common.c b/arch/arm/plat-mxc/irq-common.c new file mode 100644 index 00000000000..0c799ac2773 --- /dev/null +++ b/arch/arm/plat-mxc/irq-common.c @@ -0,0 +1,60 @@ +/* + * Copyright (C) BitBox Ltd 2010 + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ + +#include <linux/module.h> +#include <linux/irq.h> + +#include "irq-common.h" + +int imx_irq_set_priority(unsigned char irq, unsigned char prio) +{ + struct mxc_irq_chip *chip; + struct irq_chip *base; + int ret; + + ret = -ENOSYS; + + base = get_irq_chip(irq); + if (base) { + chip = container_of(base, struct mxc_irq_chip, base); + if (chip->set_priority) + ret = chip->set_priority(irq, prio); + } + + return ret; +} +EXPORT_SYMBOL(imx_irq_set_priority); + +int mxc_set_irq_fiq(unsigned int irq, unsigned int type) +{ + struct mxc_irq_chip *chip; + struct irq_chip *base; + int ret; + + ret = -ENOSYS; + + base = get_irq_chip(irq); + if (base) { + chip = container_of(base, struct mxc_irq_chip, base); + if (chip->set_irq_fiq) + ret = chip->set_irq_fiq(irq, type); + } + + return ret; +} +EXPORT_SYMBOL(mxc_set_irq_fiq); diff --git a/arch/arm/plat-mxc/irq-common.h b/arch/arm/plat-mxc/irq-common.h new file mode 100644 index 00000000000..7203543fb1b --- /dev/null +++ b/arch/arm/plat-mxc/irq-common.h @@ -0,0 +1,29 @@ +/* + * Copyright (C) BitBox Ltd 2010 + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ + +#ifndef __PLAT_MXC_IRQ_COMMON_H__ +#define __PLAT_MXC_IRQ_COMMON_H__ + +struct mxc_irq_chip +{ + struct irq_chip base; + int (*set_priority)(unsigned char irq, unsigned char prio); + int (*set_irq_fiq)(unsigned int irq, unsigned int type); +}; + +#endif diff --git a/arch/arm/plat-mxc/system.c b/arch/arm/plat-mxc/system.c index 925bce4607e..3455fc0575a 100644 --- a/arch/arm/plat-mxc/system.c +++ b/arch/arm/plat-mxc/system.c @@ -26,6 +26,7 @@ #include <mach/common.h> #include <asm/proc-fns.h> #include <asm/system.h> +#include <asm/mach-types.h> static void __iomem *wdog_base; @@ -42,12 +43,19 @@ void arch_reset(char mode, const char *cmd) return; } #endif +#ifdef CONFIG_MACH_MX51_EFIKAMX + if (machine_is_mx51_efikamx()) { + mx51_efikamx_reset(); + return; + } +#endif + if (cpu_is_mx1()) { wcr_enable = (1 << 0); } else { struct clk *clk; - clk = clk_get_sys("imx-wdt.0", NULL); + clk = clk_get_sys("imx2-wdt.0", NULL); if (!IS_ERR(clk)) clk_enable(clk); wcr_enable = (1 << 2); diff --git a/arch/arm/plat-mxc/tzic.c b/arch/arm/plat-mxc/tzic.c index 3703ab28257..e69ed8a8c20 100644 --- a/arch/arm/plat-mxc/tzic.c +++ b/arch/arm/plat-mxc/tzic.c @@ -21,6 +21,8 @@ #include <mach/hardware.h> #include <mach/common.h> +#include "irq-common.h" + /* ***************************************** * TZIC Registers * @@ -47,6 +49,25 @@ void __iomem *tzic_base; /* Used as irq controller base in entry-macro.S */ +#ifdef CONFIG_FIQ +static int tzic_set_irq_fiq(unsigned int irq, unsigned int type) +{ + unsigned int index, mask, value; + + index = irq >> 5; + if (unlikely(index >= 4)) + return -EINVAL; + mask = 1U << (irq & 0x1F); + + value = __raw_readl(tzic_base + TZIC_INTSEC0(index)) | mask; + if (type) + value &= ~mask; + __raw_writel(value, tzic_base + TZIC_INTSEC0(index)); + + return 0; +} +#endif + /** * tzic_mask_irq() - Disable interrupt number "irq" in the TZIC * @@ -104,12 +125,17 @@ static int tzic_set_wake_irq(unsigned int irq, unsigned int enable) return 0; } -static struct irq_chip mxc_tzic_chip = { - .name = "MXC_TZIC", - .ack = tzic_mask_irq, - .mask = tzic_mask_irq, - .unmask = tzic_unmask_irq, - .set_wake = tzic_set_wake_irq, +static struct mxc_irq_chip mxc_tzic_chip = { + .base = { + .name = "MXC_TZIC", + .ack = tzic_mask_irq, + .mask = tzic_mask_irq, + .unmask = tzic_unmask_irq, + .set_wake = tzic_set_wake_irq, + }, +#ifdef CONFIG_FIQ + .set_irq_fiq = tzic_set_irq_fiq, +#endif }; /* @@ -141,10 +167,16 @@ void __init tzic_init_irq(void __iomem *irqbase) /* all IRQ no FIQ Warning :: No selection */ for (i = 0; i < MXC_INTERNAL_IRQS; i++) { - set_irq_chip(i, &mxc_tzic_chip); + set_irq_chip(i, &mxc_tzic_chip.base); set_irq_handler(i, handle_level_irq); set_irq_flags(i, IRQF_VALID); } + +#ifdef CONFIG_FIQ + /* Initialize FIQ */ + init_FIQ(); +#endif + pr_info("TrustZone Interrupt Controller (TZIC) initialized\n"); } diff --git a/drivers/dma/imx-sdma.c b/drivers/dma/imx-sdma.c index d0602dd5d1b..d5a5d4d9c19 100644 --- a/drivers/dma/imx-sdma.c +++ b/drivers/dma/imx-sdma.c @@ -273,50 +273,6 @@ struct sdma_channel { #define MXC_SDMA_MIN_PRIORITY 1 #define MXC_SDMA_MAX_PRIORITY 7 -/** - * struct sdma_script_start_addrs - SDMA script start pointers - * - * start addresses of the different functions in the physical - * address space of the SDMA engine. - */ -struct sdma_script_start_addrs { - u32 ap_2_ap_addr; - u32 ap_2_bp_addr; - u32 ap_2_ap_fixed_addr; - u32 bp_2_ap_addr; - u32 loopback_on_dsp_side_addr; - u32 mcu_interrupt_only_addr; - u32 firi_2_per_addr; - u32 firi_2_mcu_addr; - u32 per_2_firi_addr; - u32 mcu_2_firi_addr; - u32 uart_2_per_addr; - u32 uart_2_mcu_addr; - u32 per_2_app_addr; - u32 mcu_2_app_addr; - u32 per_2_per_addr; - u32 uartsh_2_per_addr; - u32 uartsh_2_mcu_addr; - u32 per_2_shp_addr; - u32 mcu_2_shp_addr; - u32 ata_2_mcu_addr; - u32 mcu_2_ata_addr; - u32 app_2_per_addr; - u32 app_2_mcu_addr; - u32 shp_2_per_addr; - u32 shp_2_mcu_addr; - u32 mshc_2_mcu_addr; - u32 mcu_2_mshc_addr; - u32 spdif_2_mcu_addr; - u32 mcu_2_spdif_addr; - u32 asrc_2_mcu_addr; - u32 ext_mem_2_ipu_addr; - u32 descrambler_addr; - u32 dptc_dvfs_addr; - u32 utra_addr; - u32 ram_code_start_addr; -}; - #define SDMA_FIRMWARE_MAGIC 0x414d4453 /** @@ -1127,8 +1083,74 @@ static void sdma_issue_pending(struct dma_chan *chan) */ } -static int __init sdma_init(struct sdma_engine *sdma, - void *ram_code, int ram_code_size) +#define SDMA_SCRIPT_ADDRS_ARRAY_SIZE_V1 34 + +static void sdma_add_scripts(struct sdma_engine *sdma, + const struct sdma_script_start_addrs *addr) +{ + s32 *addr_arr = (u32 *)addr; + s32 *saddr_arr = (u32 *)sdma->script_addrs; + int i; + + for (i = 0; i < SDMA_SCRIPT_ADDRS_ARRAY_SIZE_V1; i++) + if (addr_arr[i] > 0) + saddr_arr[i] = addr_arr[i]; +} + +static int __init sdma_get_firmware(struct sdma_engine *sdma, + const char *cpu_name, int to_version) +{ + const struct firmware *fw; + char *fwname; + const struct sdma_firmware_header *header; + int ret; + const struct sdma_script_start_addrs *addr; + unsigned short *ram_code; + + fwname = kasprintf(GFP_KERNEL, "sdma-%s-to%d.bin", cpu_name, to_version); + if (!fwname) + return -ENOMEM; + + ret = request_firmware(&fw, fwname, sdma->dev); + if (ret) { + kfree(fwname); + return ret; + } + kfree(fwname); + + if (fw->size < sizeof(*header)) + goto err_firmware; + + header = (struct sdma_firmware_header *)fw->data; + + if (header->magic != SDMA_FIRMWARE_MAGIC) + goto err_firmware; + if (header->ram_code_start + header->ram_code_size > fw->size) + goto err_firmware; + + addr = (void *)header + header->script_addrs_start; + ram_code = (void *)header + header->ram_code_start; + + clk_enable(sdma->clk); + /* download the RAM image for SDMA */ + sdma_load_script(sdma, ram_code, + header->ram_code_size, + sdma->script_addrs->ram_code_start_addr); + clk_disable(sdma->clk); + + sdma_add_scripts(sdma, addr); + + dev_info(sdma->dev, "loaded firmware %d.%d\n", + header->version_major, + header->version_minor); + +err_firmware: + release_firmware(fw); + + return ret; +} + +static int __init sdma_init(struct sdma_engine *sdma) { int i, ret; dma_addr_t ccb_phys; @@ -1192,11 +1214,6 @@ static int __init sdma_init(struct sdma_engine *sdma, __raw_writel(ccb_phys, sdma->regs + SDMA_H_C0PTR); - /* download the RAM image for SDMA */ - sdma_load_script(sdma, ram_code, - ram_code_size, - sdma->script_addrs->ram_code_start_addr); - /* Set bits of CONFIG register with given context switching mode */ __raw_writel(SDMA_H_CONFIG_CSM, sdma->regs + SDMA_H_CONFIG); @@ -1216,14 +1233,9 @@ err_dma_alloc: static int __init sdma_probe(struct platform_device *pdev) { int ret; - const struct firmware *fw; - const struct sdma_firmware_header *header; - const struct sdma_script_start_addrs *addr; int irq; - unsigned short *ram_code; struct resource *iores; struct sdma_platform_data *pdata = pdev->dev.platform_data; - char *fwname; int i; dma_cap_mask_t mask; struct sdma_engine *sdma; @@ -1262,38 +1274,9 @@ static int __init sdma_probe(struct platform_device *pdev) if (ret) goto err_request_irq; - fwname = kasprintf(GFP_KERNEL, "sdma-%s-to%d.bin", - pdata->cpu_name, pdata->to_version); - if (!fwname) { - ret = -ENOMEM; - goto err_cputype; - } - - ret = request_firmware(&fw, fwname, &pdev->dev); - if (ret) { - dev_err(&pdev->dev, "request firmware \"%s\" failed with %d\n", - fwname, ret); - kfree(fwname); - goto err_cputype; - } - kfree(fwname); - - if (fw->size < sizeof(*header)) - goto err_firmware; - - header = (struct sdma_firmware_header *)fw->data; - - if (header->magic != SDMA_FIRMWARE_MAGIC) - goto err_firmware; - if (header->ram_code_start + header->ram_code_size > fw->size) - goto err_firmware; - - addr = (void *)header + header->script_addrs_start; - ram_code = (void *)header + header->ram_code_start; - sdma->script_addrs = kmalloc(sizeof(*addr), GFP_KERNEL); + sdma->script_addrs = kzalloc(sizeof(*sdma->script_addrs), GFP_KERNEL); if (!sdma->script_addrs) - goto err_firmware; - memcpy(sdma->script_addrs, addr, sizeof(*addr)); + goto err_alloc; sdma->version = pdata->sdma_version; @@ -1316,10 +1299,15 @@ static int __init sdma_probe(struct platform_device *pdev) list_add_tail(&sdmac->chan.device_node, &sdma->dma_device.channels); } - ret = sdma_init(sdma, ram_code, header->ram_code_size); + ret = sdma_init(sdma); if (ret) goto err_init; + if (pdata->script_addrs) + sdma_add_scripts(sdma, pdata->script_addrs); + + sdma_get_firmware(sdma, pdata->cpu_name, pdata->to_version); + sdma->dma_device.dev = &pdev->dev; sdma->dma_device.device_alloc_chan_resources = sdma_alloc_chan_resources; @@ -1336,10 +1324,6 @@ static int __init sdma_probe(struct platform_device *pdev) goto err_init; } - dev_info(&pdev->dev, "initialized (firmware %d.%d)\n", - header->version_major, - header->version_minor); - /* request channel 0. This is an internal control channel * to the SDMA engine and not available to clients. */ @@ -1347,15 +1331,13 @@ static int __init sdma_probe(struct platform_device *pdev) dma_cap_set(DMA_SLAVE, mask); dma_request_channel(mask, NULL, NULL); - release_firmware(fw); + dev_info(sdma->dev, "initialized\n"); return 0; err_init: kfree(sdma->script_addrs); -err_firmware: - release_firmware(fw); -err_cputype: +err_alloc: free_irq(irq, sdma); err_request_irq: iounmap(sdma->regs); diff --git a/drivers/usb/gadget/fsl_mxc_udc.c b/drivers/usb/gadget/fsl_mxc_udc.c index 5bdbfe61985..77b1eb57702 100644 --- a/drivers/usb/gadget/fsl_mxc_udc.c +++ b/drivers/usb/gadget/fsl_mxc_udc.c @@ -93,9 +93,9 @@ void fsl_udc_clk_finalize(struct platform_device *pdev) /* workaround ENGcm09152 for i.MX35 */ if (pdata->workaround & FLS_USB2_WORKAROUND_ENGCM09152) { - v = readl(MX35_IO_ADDRESS(MX35_OTG_BASE_ADDR + + v = readl(MX35_IO_ADDRESS(MX35_USB_BASE_ADDR + USBPHYCTRL_OTGBASE_OFFSET)); - writel(v | USBPHYCTRL_EVDO, MX35_IO_ADDRESS(MX35_OTG_BASE_ADDR + + writel(v | USBPHYCTRL_EVDO, MX35_IO_ADDRESS(MX35_USB_BASE_ADDR + USBPHYCTRL_OTGBASE_OFFSET)); } #endif diff --git a/drivers/usb/host/ehci-mxc.c b/drivers/usb/host/ehci-mxc.c index bce85055019..a22d2df769a 100644 --- a/drivers/usb/host/ehci-mxc.c +++ b/drivers/usb/host/ehci-mxc.c @@ -28,7 +28,7 @@ #define ULPI_VIEWPORT_OFFSET 0x170 struct ehci_mxc_priv { - struct clk *usbclk, *ahbclk; + struct clk *usbclk, *ahbclk, *phy1clk; struct usb_hcd *hcd; }; @@ -168,17 +168,6 @@ static int ehci_mxc_drv_probe(struct platform_device *pdev) goto err_ioremap; } - /* call platform specific init function */ - if (pdata->init) { - ret = pdata->init(pdev); - if (ret) { - dev_err(dev, "platform init failed\n"); - goto err_init; - } - /* platforms need some time to settle changed IO settings */ - mdelay(10); - } - /* enable clocks */ priv->usbclk = clk_get(dev, "usb"); if (IS_ERR(priv->usbclk)) { @@ -196,6 +185,28 @@ static int ehci_mxc_drv_probe(struct platform_device *pdev) clk_enable(priv->ahbclk); } + /* "dr" device has its own clock */ + if (pdev->id == 0) { + priv->phy1clk = clk_get(dev, "usb_phy1"); + if (IS_ERR(priv->phy1clk)) { + ret = PTR_ERR(priv->phy1clk); + goto err_clk_phy; + } + clk_enable(priv->phy1clk); + } + + + /* call platform specific init function */ + if (pdata->init) { + ret = pdata->init(pdev); + if (ret) { + dev_err(dev, "platform init failed\n"); + goto err_init; + } + /* platforms need some time to settle changed IO settings */ + mdelay(10); + } + /* setup specific usb hw */ ret = mxc_initialize_usb_hw(pdev->id, pdata->flags); if (ret < 0) @@ -230,6 +241,11 @@ err_add: if (pdata && pdata->exit) pdata->exit(pdev); err_init: + if (priv->phy1clk) { + clk_disable(priv->phy1clk); + clk_put(priv->phy1clk); + } +err_clk_phy: if (priv->ahbclk) { clk_disable(priv->ahbclk); clk_put(priv->ahbclk); @@ -273,6 +289,10 @@ static int __exit ehci_mxc_drv_remove(struct platform_device *pdev) clk_disable(priv->ahbclk); clk_put(priv->ahbclk); } + if (priv->phy1clk) { + clk_disable(priv->phy1clk); + clk_put(priv->phy1clk); + } kfree(priv); diff --git a/drivers/watchdog/imx2_wdt.c b/drivers/watchdog/imx2_wdt.c index 2ee7dac55a3..86f7cac1026 100644 --- a/drivers/watchdog/imx2_wdt.c +++ b/drivers/watchdog/imx2_wdt.c @@ -270,7 +270,7 @@ static int __init imx2_wdt_probe(struct platform_device *pdev) return -ENOMEM; } - imx2_wdt.clk = clk_get_sys("imx-wdt.0", NULL); + imx2_wdt.clk = clk_get(&pdev->dev, NULL); if (IS_ERR(imx2_wdt.clk)) { dev_err(&pdev->dev, "can't get Watchdog clock\n"); return PTR_ERR(imx2_wdt.clk); |