summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--arch/Kconfig14
-rw-r--r--arch/arm/Kconfig12
-rw-r--r--arch/arm/configs/mx51_defconfig1
-rw-r--r--arch/arm/include/asm/hardware/cache-l2x0.h13
-rw-r--r--arch/arm/include/asm/memblock.h7
-rw-r--r--arch/arm/include/asm/outercache.h24
-rw-r--r--arch/arm/kernel/machine_kexec.c3
-rw-r--r--arch/arm/kernel/vmlinux.lds.S1
-rw-r--r--arch/arm/mach-imx/mach-mx27_3ds.c38
-rw-r--r--arch/arm/mach-ixp2000/core.c2
-rw-r--r--arch/arm/mach-mx25/Kconfig1
-rw-r--r--arch/arm/mach-mx25/mach-mx25_3ds.c10
-rw-r--r--arch/arm/mach-mx3/Kconfig2
-rw-r--r--arch/arm/mach-mx3/devices.c16
-rw-r--r--arch/arm/mach-mx3/mach-mx31_3ds.c38
-rw-r--r--arch/arm/mach-mx3/mach-mx35_3ds.c16
-rw-r--r--arch/arm/mach-mx5/Kconfig2
-rw-r--r--arch/arm/mach-mx5/Makefile1
-rw-r--r--arch/arm/mach-mx5/board-mx51_babbage.c49
-rw-r--r--arch/arm/mach-mx5/clock-mx51.c22
-rw-r--r--arch/arm/mach-mx5/cpu_op-mx51.c29
-rw-r--r--arch/arm/mach-mx5/cpu_op-mx51.h14
-rw-r--r--arch/arm/mach-mx5/devices-imx51.h2
-rw-r--r--arch/arm/mach-omap2/omap4-common.c13
-rw-r--r--arch/arm/mach-s3c2410/include/mach/gpio.h10
-rw-r--r--arch/arm/mach-s3c2410/include/mach/regs-s3c2443-clock.h2
-rw-r--r--arch/arm/mach-s3c2410/include/mach/vmalloc.h2
-rw-r--r--arch/arm/mach-s3c2412/s3c2412.c3
-rw-r--r--arch/arm/mach-s3c2416/Kconfig6
-rw-r--r--arch/arm/mach-s3c2416/Makefile2
-rw-r--r--arch/arm/mach-s3c2416/irq.c2
-rw-r--r--arch/arm/mach-s3c2416/pm.c84
-rw-r--r--arch/arm/mach-s3c2416/s3c2416.c3
-rw-r--r--arch/arm/mach-s3c2440/s3c244x.c3
-rw-r--r--arch/arm/mach-s3c2443/s3c2443.c3
-rw-r--r--arch/arm/mach-s3c24a0/include/mach/vmalloc.h2
-rw-r--r--arch/arm/mach-s3c64xx/Kconfig21
-rw-r--r--arch/arm/mach-s3c64xx/Makefile1
-rw-r--r--arch/arm/mach-s3c64xx/dev-audio.c63
-rw-r--r--arch/arm/mach-s3c64xx/gpiolib.c8
-rw-r--r--arch/arm/mach-s3c64xx/include/mach/vmalloc.h2
-rw-r--r--arch/arm/mach-s3c64xx/mach-mini6410.c357
-rw-r--r--arch/arm/mach-s3c64xx/mach-real6410.c198
-rw-r--r--arch/arm/mach-s3c64xx/setup-fb-24bpp.c13
-rw-r--r--arch/arm/mach-s3c64xx/setup-ide.c11
-rw-r--r--arch/arm/mach-s3c64xx/setup-keypad.c16
-rw-r--r--arch/arm/mach-s3c64xx/setup-sdhci-gpio.c41
-rw-r--r--arch/arm/mach-s5p6442/Kconfig1
-rw-r--r--arch/arm/mach-s5p6442/clock.c28
-rw-r--r--arch/arm/mach-s5p6442/dev-audio.c30
-rw-r--r--arch/arm/mach-s5p6442/dev-spi.c6
-rw-r--r--arch/arm/mach-s5p6442/dma.c2
-rw-r--r--arch/arm/mach-s5p6442/include/mach/regs-clock.h1
-rw-r--r--arch/arm/mach-s5p6442/include/mach/vmalloc.h2
-rw-r--r--arch/arm/mach-s5p64x0/Kconfig2
-rw-r--r--arch/arm/mach-s5p64x0/clock-s5p6440.c19
-rw-r--r--arch/arm/mach-s5p64x0/clock-s5p6450.c19
-rw-r--r--arch/arm/mach-s5p64x0/clock.c18
-rw-r--r--arch/arm/mach-s5p64x0/dev-audio.c26
-rw-r--r--arch/arm/mach-s5p64x0/dev-spi.c38
-rw-r--r--arch/arm/mach-s5p64x0/dma.c2
-rw-r--r--arch/arm/mach-s5p64x0/include/mach/regs-clock.h2
-rw-r--r--arch/arm/mach-s5p64x0/include/mach/vmalloc.h2
-rw-r--r--arch/arm/mach-s5p64x0/setup-i2c0.c12
-rw-r--r--arch/arm/mach-s5p64x0/setup-i2c1.c12
-rw-r--r--arch/arm/mach-s5pc100/Kconfig1
-rw-r--r--arch/arm/mach-s5pc100/Makefile2
-rw-r--r--arch/arm/mach-s5pc100/clock.c174
-rw-r--r--arch/arm/mach-s5pc100/dev-audio.c86
-rw-r--r--arch/arm/mach-s5pc100/dev-spi.c22
-rw-r--r--arch/arm/mach-s5pc100/dma.c4
-rw-r--r--arch/arm/mach-s5pc100/gpiolib.c216
-rw-r--r--arch/arm/mach-s5pc100/include/mach/gpio.h7
-rw-r--r--arch/arm/mach-s5pc100/include/mach/irqs.h13
-rw-r--r--arch/arm/mach-s5pc100/include/mach/map.h2
-rw-r--r--arch/arm/mach-s5pc100/include/mach/regs-gpio.h49
-rw-r--r--arch/arm/mach-s5pc100/include/mach/vmalloc.h2
-rw-r--r--arch/arm/mach-s5pc100/irq-gpio.c266
-rw-r--r--arch/arm/mach-s5pc100/mach-smdkc100.c4
-rw-r--r--arch/arm/mach-s5pc100/setup-fb-24bpp.c30
-rw-r--r--arch/arm/mach-s5pc100/setup-i2c0.c6
-rw-r--r--arch/arm/mach-s5pc100/setup-i2c1.c6
-rw-r--r--arch/arm/mach-s5pc100/setup-ide.c41
-rw-r--r--arch/arm/mach-s5pc100/setup-keypad.c15
-rw-r--r--arch/arm/mach-s5pc100/setup-sdhci-gpio.c35
-rw-r--r--arch/arm/mach-s5pv210/Kconfig37
-rw-r--r--arch/arm/mach-s5pv210/Makefile3
-rw-r--r--arch/arm/mach-s5pv210/clock.c207
-rw-r--r--arch/arm/mach-s5pv210/cpu.c15
-rw-r--r--arch/arm/mach-s5pv210/cpufreq.c484
-rw-r--r--arch/arm/mach-s5pv210/dev-audio.c86
-rw-r--r--arch/arm/mach-s5pv210/dev-spi.c19
-rw-r--r--arch/arm/mach-s5pv210/dma.c4
-rw-r--r--arch/arm/mach-s5pv210/gpiolib.c14
-rw-r--r--arch/arm/mach-s5pv210/include/mach/irqs.h12
-rw-r--r--arch/arm/mach-s5pv210/include/mach/map.h12
-rw-r--r--arch/arm/mach-s5pv210/include/mach/pm-core.h43
-rw-r--r--arch/arm/mach-s5pv210/include/mach/regs-clock.h39
-rw-r--r--arch/arm/mach-s5pv210/include/mach/regs-gpio.h7
-rw-r--r--arch/arm/mach-s5pv210/include/mach/regs-sys.h19
-rw-r--r--arch/arm/mach-s5pv210/include/mach/vmalloc.h2
-rw-r--r--arch/arm/mach-s5pv210/mach-aquila.c169
-rw-r--r--arch/arm/mach-s5pv210/mach-goni.c381
-rw-r--r--arch/arm/mach-s5pv210/mach-smdkc110.c4
-rw-r--r--arch/arm/mach-s5pv210/mach-smdkv210.c4
-rw-r--r--arch/arm/mach-s5pv210/mach-torbreck.c131
-rw-r--r--arch/arm/mach-s5pv210/pm.c166
-rw-r--r--arch/arm/mach-s5pv210/setup-fb-24bpp.c34
-rw-r--r--arch/arm/mach-s5pv210/setup-i2c0.c6
-rw-r--r--arch/arm/mach-s5pv210/setup-i2c1.c6
-rw-r--r--arch/arm/mach-s5pv210/setup-i2c2.c6
-rw-r--r--arch/arm/mach-s5pv210/setup-ide.c49
-rw-r--r--arch/arm/mach-s5pv210/setup-keypad.c14
-rw-r--r--arch/arm/mach-s5pv210/setup-sdhci-gpio.c57
-rw-r--r--arch/arm/mach-s5pv210/sleep.S170
-rw-r--r--arch/arm/mach-s5pv310/Kconfig95
-rw-r--r--arch/arm/mach-s5pv310/Makefile10
-rw-r--r--arch/arm/mach-s5pv310/clock.c635
-rw-r--r--arch/arm/mach-s5pv310/cpu.c47
-rw-r--r--arch/arm/mach-s5pv310/gpiolib.c304
-rw-r--r--arch/arm/mach-s5pv310/hotplug.c144
-rw-r--r--arch/arm/mach-s5pv310/include/mach/irqs.h44
-rw-r--r--arch/arm/mach-s5pv310/include/mach/map.h19
-rw-r--r--arch/arm/mach-s5pv310/include/mach/regs-clock.h32
-rw-r--r--arch/arm/mach-s5pv310/include/mach/regs-gpio.h42
-rw-r--r--arch/arm/mach-s5pv310/include/mach/regs-srom.h50
-rw-r--r--arch/arm/mach-s5pv310/include/mach/vmalloc.h2
-rw-r--r--arch/arm/mach-s5pv310/irq-combiner.c6
-rw-r--r--arch/arm/mach-s5pv310/irq-eint.c228
-rw-r--r--arch/arm/mach-s5pv310/mach-smdkc210.c202
-rw-r--r--arch/arm/mach-s5pv310/mach-smdkv310.c121
-rw-r--r--arch/arm/mach-s5pv310/mach-universal_c210.c81
-rw-r--r--arch/arm/mach-s5pv310/setup-i2c0.c6
-rw-r--r--arch/arm/mach-s5pv310/setup-i2c1.c6
-rw-r--r--arch/arm/mach-s5pv310/setup-i2c2.c6
-rw-r--r--arch/arm/mach-s5pv310/setup-i2c3.c23
-rw-r--r--arch/arm/mach-s5pv310/setup-i2c4.c23
-rw-r--r--arch/arm/mach-s5pv310/setup-i2c5.c23
-rw-r--r--arch/arm/mach-s5pv310/setup-i2c6.c23
-rw-r--r--arch/arm/mach-s5pv310/setup-i2c7.c23
-rw-r--r--arch/arm/mach-s5pv310/setup-sdhci-gpio.c152
-rw-r--r--arch/arm/mach-s5pv310/setup-sdhci.c69
-rw-r--r--arch/arm/mach-sa1100/cpu-sa1100.c5
-rw-r--r--arch/arm/mach-shmobile/board-ap4evb.c326
-rw-r--r--arch/arm/mach-shmobile/clock-sh7367.c2
-rw-r--r--arch/arm/mach-shmobile/clock-sh7372.c78
-rw-r--r--arch/arm/mach-shmobile/clock-sh7377.c2
-rw-r--r--arch/arm/mach-shmobile/include/mach/sh7372.h10
-rw-r--r--arch/arm/mach-shmobile/intc-sh7372.c28
-rw-r--r--arch/arm/mach-shmobile/pfc-sh7372.c8
-rw-r--r--arch/arm/mach-shmobile/setup-sh7367.c1
-rw-r--r--arch/arm/mach-shmobile/setup-sh7372.c94
-rw-r--r--arch/arm/mach-shmobile/setup-sh7377.c1
-rw-r--r--arch/arm/mach-u300/clock.c6
-rw-r--r--arch/arm/mach-u300/core.c47
-rw-r--r--arch/arm/mach-u300/include/mach/u300-regs.h2
-rw-r--r--arch/arm/mach-ux500/cpu.c45
-rw-r--r--arch/arm/mm/Kconfig8
-rw-r--r--arch/arm/mm/cache-fa.S12
-rw-r--r--arch/arm/mm/cache-l2x0.c78
-rw-r--r--arch/arm/mm/cache-v3.S10
-rw-r--r--arch/arm/mm/cache-v4.S10
-rw-r--r--arch/arm/mm/cache-v4wb.S12
-rw-r--r--arch/arm/mm/cache-v4wt.S12
-rw-r--r--arch/arm/mm/fault-armv.c28
-rw-r--r--arch/arm/mm/init.c155
-rw-r--r--arch/arm/mm/mmu.c73
-rw-r--r--arch/arm/mm/proc-arm1020.S15
-rw-r--r--arch/arm/mm/proc-arm1020e.S15
-rw-r--r--arch/arm/mm/proc-arm1022.S15
-rw-r--r--arch/arm/mm/proc-arm1026.S15
-rw-r--r--arch/arm/mm/proc-arm920.S12
-rw-r--r--arch/arm/mm/proc-arm922.S12
-rw-r--r--arch/arm/mm/proc-arm925.S12
-rw-r--r--arch/arm/mm/proc-arm926.S12
-rw-r--r--arch/arm/mm/proc-arm940.S12
-rw-r--r--arch/arm/mm/proc-arm946.S12
-rw-r--r--arch/arm/mm/proc-feroceon.S13
-rw-r--r--arch/arm/mm/proc-xsc3.S12
-rw-r--r--arch/arm/mm/proc-xscale.S12
-rw-r--r--arch/arm/plat-mxc/Makefile1
-rw-r--r--arch/arm/plat-mxc/cpufreq.c206
-rw-r--r--arch/arm/plat-mxc/devices/Kconfig6
-rw-r--r--arch/arm/plat-mxc/devices/Makefile1
-rw-r--r--arch/arm/plat-mxc/devices/platform-gpio_keys.c27
-rw-r--r--arch/arm/plat-mxc/gpio.c32
-rw-r--r--arch/arm/plat-mxc/include/mach/devices-common.h4
-rw-r--r--arch/arm/plat-mxc/include/mach/iomux-mx51.h2
-rw-r--r--arch/arm/plat-mxc/include/mach/mx31.h1
-rw-r--r--arch/arm/plat-mxc/include/mach/mx35.h2
-rw-r--r--arch/arm/plat-mxc/include/mach/mxc.h13
-rw-r--r--arch/arm/plat-pxa/include/plat/pxa3xx_nand.h18
-rw-r--r--arch/arm/plat-s3c24xx/common-smdk.c2
-rw-r--r--arch/arm/plat-s3c24xx/gpiolib.c8
-rw-r--r--arch/arm/plat-s5p/Kconfig5
-rw-r--r--arch/arm/plat-s5p/Makefile3
-rw-r--r--arch/arm/plat-s5p/clock.c29
-rw-r--r--arch/arm/plat-s5p/include/plat/irqs.h18
-rw-r--r--arch/arm/plat-s5p/include/plat/map-s5p.h40
-rw-r--r--arch/arm/plat-s5p/include/plat/s5p-clock.h4
-rw-r--r--arch/arm/plat-s5p/irq-eint.c10
-rw-r--r--arch/arm/plat-s5p/irq-gpioint.c237
-rw-r--r--arch/arm/plat-s5p/irq-pm.c93
-rw-r--r--arch/arm/plat-s5p/pm.c52
-rw-r--r--arch/arm/plat-samsung/Kconfig25
-rw-r--r--arch/arm/plat-samsung/Makefile5
-rw-r--r--arch/arm/plat-samsung/dev-hsmmc.c8
-rw-r--r--arch/arm/plat-samsung/dev-hsmmc1.c8
-rw-r--r--arch/arm/plat-samsung/dev-hsmmc2.c8
-rw-r--r--arch/arm/plat-samsung/dev-hsmmc3.c12
-rw-r--r--arch/arm/plat-samsung/dev-i2c2.c4
-rw-r--r--arch/arm/plat-samsung/dev-i2c3.c68
-rw-r--r--arch/arm/plat-samsung/dev-i2c4.c68
-rw-r--r--arch/arm/plat-samsung/dev-i2c5.c68
-rw-r--r--arch/arm/plat-samsung/dev-i2c6.c68
-rw-r--r--arch/arm/plat-samsung/dev-i2c7.c68
-rw-r--r--arch/arm/plat-samsung/gpio-config.c50
-rw-r--r--arch/arm/plat-samsung/gpio.c8
-rw-r--r--arch/arm/plat-samsung/include/plat/audio.h9
-rw-r--r--arch/arm/plat-samsung/include/plat/devs.h7
-rw-r--r--arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h6
-rw-r--r--arch/arm/plat-samsung/include/plat/gpio-cfg.h56
-rw-r--r--arch/arm/plat-samsung/include/plat/gpio-core.h15
-rw-r--r--arch/arm/plat-samsung/include/plat/iic.h10
-rw-r--r--arch/arm/plat-samsung/include/plat/map-base.h4
-rw-r--r--arch/arm/plat-samsung/include/plat/nand-core.h28
-rw-r--r--arch/arm/plat-samsung/include/plat/sdhci.h64
-rw-r--r--arch/arm/plat-samsung/pm-gpio.c4
-rw-r--r--arch/arm/plat-samsung/s3c-pl330.c34
-rw-r--r--arch/mips/include/asm/mach-bcm63xx/bcm963xx_tag.h97
-rw-r--r--arch/powerpc/Kconfig7
-rw-r--r--arch/powerpc/include/asm/fsl_lbc.h34
-rw-r--r--arch/powerpc/sysdev/fsl_lbc.c244
-rw-r--r--arch/sh/boards/mach-ap325rxa/setup.c29
-rw-r--r--arch/sh/boards/mach-ecovec24/setup.c60
-rw-r--r--arch/sh/boards/mach-kfr2r09/setup.c29
-rw-r--r--arch/sh/boards/mach-migor/setup.c58
-rw-r--r--arch/sh/boards/mach-se/7724/setup.c54
-rw-r--r--arch/sparc/include/asm/jump_label.h1
-rw-r--r--arch/x86/Makefile_32.cpu13
-rw-r--r--arch/x86/kernel/alternative.c69
-rw-r--r--drivers/char/tty_audit.c38
-rw-r--r--drivers/mtd/chips/cfi_cmdset_0001.c4
-rw-r--r--drivers/mtd/chips/cfi_cmdset_0002.c83
-rw-r--r--drivers/mtd/chips/cfi_probe.c2
-rw-r--r--drivers/mtd/chips/cfi_util.c7
-rw-r--r--drivers/mtd/devices/block2mtd.c1
-rw-r--r--drivers/mtd/devices/m25p80.c6
-rw-r--r--drivers/mtd/devices/phram.c2
-rw-r--r--drivers/mtd/maps/Kconfig9
-rw-r--r--drivers/mtd/maps/Makefile1
-rw-r--r--drivers/mtd/maps/bcm963xx-flash.c271
-rw-r--r--drivers/mtd/maps/gpio-addr-flash.c10
-rw-r--r--drivers/mtd/maps/pcmciamtd.c4
-rw-r--r--drivers/mtd/maps/physmap_of.c20
-rw-r--r--drivers/mtd/mtd_blkdevs.c68
-rw-r--r--drivers/mtd/mtdchar.c111
-rw-r--r--drivers/mtd/mtdpart.c154
-rw-r--r--drivers/mtd/nand/Kconfig15
-rw-r--r--drivers/mtd/nand/Makefile1
-rw-r--r--drivers/mtd/nand/bf5xx_nand.c14
-rw-r--r--drivers/mtd/nand/davinci_nand.c11
-rw-r--r--drivers/mtd/nand/denali.c1
-rw-r--r--drivers/mtd/nand/fsl_elbc_nand.c484
-rw-r--r--drivers/mtd/nand/fsl_upm.c10
-rw-r--r--drivers/mtd/nand/fsmc_nand.c866
-rw-r--r--drivers/mtd/nand/mpc5121_nfc.c11
-rw-r--r--drivers/mtd/nand/nand_base.c338
-rw-r--r--drivers/mtd/nand/nand_bbt.c250
-rw-r--r--drivers/mtd/nand/nand_ids.c31
-rw-r--r--drivers/mtd/nand/nandsim.c19
-rw-r--r--drivers/mtd/nand/ndfc.c8
-rw-r--r--drivers/mtd/nand/omap2.c4
-rw-r--r--drivers/mtd/nand/pxa3xx_nand.c348
-rw-r--r--drivers/mtd/nand/r852.c30
-rw-r--r--drivers/mtd/nand/r852.h2
-rw-r--r--drivers/mtd/ofpart.c2
-rw-r--r--drivers/mtd/onenand/Kconfig7
-rw-r--r--drivers/mtd/onenand/onenand_base.c7
-rw-r--r--drivers/mtd/onenand/samsung.c133
-rw-r--r--drivers/mtd/sm_ftl.h8
-rw-r--r--drivers/oprofile/buffer_sync.c2
-rw-r--r--drivers/oprofile/cpu_buffer.c10
-rw-r--r--drivers/oprofile/cpu_buffer.h1
-rw-r--r--drivers/oprofile/timer_int.c13
-rw-r--r--drivers/video/sh_mipi_dsi.c32
-rw-r--r--drivers/video/sh_mobile_hdmi.c629
-rw-r--r--drivers/video/sh_mobile_lcdcfb.c348
-rw-r--r--drivers/video/sh_mobile_lcdcfb.h41
-rw-r--r--fs/btrfs/compression.c2
-rw-r--r--fs/btrfs/ctree.c57
-rw-r--r--fs/btrfs/ctree.h100
-rw-r--r--fs/btrfs/dir-item.c2
-rw-r--r--fs/btrfs/disk-io.c32
-rw-r--r--fs/btrfs/extent-tree.c694
-rw-r--r--fs/btrfs/extent_io.c168
-rw-r--r--fs/btrfs/extent_io.h4
-rw-r--r--fs/btrfs/extent_map.c4
-rw-r--r--fs/btrfs/free-space-cache.c751
-rw-r--r--fs/btrfs/free-space-cache.h18
-rw-r--r--fs/btrfs/inode.c202
-rw-r--r--fs/btrfs/ioctl.c398
-rw-r--r--fs/btrfs/ioctl.h13
-rw-r--r--fs/btrfs/ordered-data.c2
-rw-r--r--fs/btrfs/relocation.c109
-rw-r--r--fs/btrfs/root-tree.c2
-rw-r--r--fs/btrfs/super.c42
-rw-r--r--fs/btrfs/transaction.c234
-rw-r--r--fs/btrfs/transaction.h8
-rw-r--r--fs/btrfs/tree-defrag.c2
-rw-r--r--fs/btrfs/tree-log.c17
-rw-r--r--fs/btrfs/volumes.c7
-rw-r--r--fs/btrfs/xattr.c2
-rw-r--r--fs/btrfs/zlib.c5
-rw-r--r--fs/compat.c1
-rw-r--r--fs/fs-writeback.c68
-rw-r--r--fs/jffs2/build.c2
-rw-r--r--fs/jffs2/compr.c6
-rw-r--r--fs/jffs2/compr.h4
-rw-r--r--fs/jffs2/compr_lzo.c4
-rw-r--r--fs/jffs2/compr_rtime.c6
-rw-r--r--fs/jffs2/compr_rubin.c11
-rw-r--r--fs/jffs2/compr_zlib.c6
-rw-r--r--fs/jffs2/dir.c3
-rw-r--r--fs/jffs2/erase.c2
-rw-r--r--fs/jffs2/fs.c22
-rw-r--r--fs/jffs2/gc.c7
-rw-r--r--fs/jffs2/jffs2_fs_sb.h1
-rw-r--r--fs/jffs2/nodelist.c8
-rw-r--r--fs/jffs2/nodelist.h3
-rw-r--r--fs/jffs2/scan.c12
-rw-r--r--include/asm-generic/audit_change_attr.h4
-rw-r--r--include/linux/audit.h9
-rw-r--r--include/linux/jump_label.h7
-rw-r--r--include/linux/mtd/bbm.h4
-rw-r--r--include/linux/mtd/cfi.h1
-rw-r--r--include/linux/mtd/fsmc.h181
-rw-r--r--include/linux/mtd/inftl.h14
-rw-r--r--include/linux/mtd/mtd.h15
-rw-r--r--include/linux/mtd/nand.h426
-rw-r--r--include/linux/mtd/partitions.h7
-rw-r--r--include/linux/tty.h9
-rw-r--r--include/linux/writeback.h2
-rw-r--r--include/mtd/mtd-abi.h16
-rw-r--r--include/mtd/mtd-user.h2
-rw-r--r--include/video/sh_mobile_lcdc.h5
-rw-r--r--ipc/shm.c1
-rw-r--r--kernel/audit.c67
-rw-r--r--kernel/audit.h5
-rw-r--r--kernel/audit_tree.c9
-rw-r--r--kernel/audit_watch.c4
-rw-r--r--kernel/auditfilter.c12
-rw-r--r--kernel/auditsc.c16
-rw-r--r--kernel/jump_label.c77
-rw-r--r--kernel/kprobes.c26
-rw-r--r--mm/mmap.c2
-rw-r--r--mm/nommu.c2
357 files changed, 14962 insertions, 3907 deletions
diff --git a/arch/Kconfig b/arch/Kconfig
index 53d7f619a1b..8bf0fa652eb 100644
--- a/arch/Kconfig
+++ b/arch/Kconfig
@@ -42,6 +42,20 @@ config KPROBES
for kernel debugging, non-intrusive instrumentation and testing.
If in doubt, say "N".
+config JUMP_LABEL
+ bool "Optimize trace point call sites"
+ depends on HAVE_ARCH_JUMP_LABEL
+ help
+ If it is detected that the compiler has support for "asm goto",
+ the kernel will compile trace point locations with just a
+ nop instruction. When trace points are enabled, the nop will
+ be converted to a jump to the trace function. This technique
+ lowers overhead and stress on the branch prediction of the
+ processor.
+
+ On i386, options added to the compiler flags may increase
+ the size of the kernel slightly.
+
config OPTPROBES
def_bool y
depends on KPROBES && HAVE_OPTPROBES
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index b527bf5701c..a19a5266d5f 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -720,9 +720,11 @@ config ARCH_S5PC100
config ARCH_S5PV210
bool "Samsung S5PV210/S5PC110"
select CPU_V7
+ select ARCH_SPARSEMEM_ENABLE
select GENERIC_GPIO
select HAVE_CLK
select ARM_L1_CACHE_SHIFT_6
+ select ARCH_HAS_CPUFREQ
select ARCH_USES_GETTIMEOFFSET
select HAVE_S3C2410_I2C
select HAVE_S3C_RTC
@@ -733,9 +735,13 @@ config ARCH_S5PV210
config ARCH_S5PV310
bool "Samsung S5PV310/S5PC210"
select CPU_V7
+ select ARCH_SPARSEMEM_ENABLE
select GENERIC_GPIO
select HAVE_CLK
select GENERIC_CLOCKEVENTS
+ select HAVE_S3C_RTC
+ select HAVE_S3C2410_I2C
+ select HAVE_S3C2410_WATCHDOG
help
Samsung S5PV310 series based systems
@@ -1662,6 +1668,12 @@ if ARCH_HAS_CPUFREQ
source "drivers/cpufreq/Kconfig"
+config CPU_FREQ_IMX
+ tristate "CPUfreq driver for i.MX CPUs"
+ depends on ARCH_MXC && CPU_FREQ
+ help
+ This enables the CPUfreq driver for i.MX CPUs.
+
config CPU_FREQ_SA1100
bool
diff --git a/arch/arm/configs/mx51_defconfig b/arch/arm/configs/mx51_defconfig
index 163cfee7644..5c7a87260fa 100644
--- a/arch/arm/configs/mx51_defconfig
+++ b/arch/arm/configs/mx51_defconfig
@@ -82,6 +82,7 @@ CONFIG_FEC=y
CONFIG_INPUT_FF_MEMLESS=m
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_EVDEV=y
+CONFIG_KEYBOARD_GPIO=y
CONFIG_INPUT_EVBUG=m
CONFIG_MOUSE_PS2=m
CONFIG_MOUSE_PS2_ELANTECH=y
diff --git a/arch/arm/include/asm/hardware/cache-l2x0.h b/arch/arm/include/asm/hardware/cache-l2x0.h
index 6bcba48800f..cc42d5fdee1 100644
--- a/arch/arm/include/asm/hardware/cache-l2x0.h
+++ b/arch/arm/include/asm/hardware/cache-l2x0.h
@@ -21,9 +21,6 @@
#define __ASM_ARM_HARDWARE_L2X0_H
#define L2X0_CACHE_ID 0x000
-#define L2X0_CACHE_ID_PART_MASK (0xf << 6)
-#define L2X0_CACHE_ID_PART_L210 (1 << 6)
-#define L2X0_CACHE_ID_PART_L310 (3 << 6)
#define L2X0_CACHE_TYPE 0x004
#define L2X0_CTRL 0x100
#define L2X0_AUX_CTRL 0x104
@@ -53,6 +50,16 @@
#define L2X0_LINE_DATA 0xF10
#define L2X0_LINE_TAG 0xF30
#define L2X0_DEBUG_CTRL 0xF40
+#define L2X0_PREFETCH_CTRL 0xF60
+#define L2X0_POWER_CTRL 0xF80
+#define L2X0_DYNAMIC_CLK_GATING_EN (1 << 1)
+#define L2X0_STNDBY_MODE_EN (1 << 0)
+
+/* Registers shifts and masks */
+#define L2X0_CACHE_ID_PART_MASK (0xf << 6)
+#define L2X0_CACHE_ID_PART_L210 (1 << 6)
+#define L2X0_CACHE_ID_PART_L310 (3 << 6)
+#define L2X0_AUX_CTRL_WAY_SIZE_MASK (0x3 << 17)
#ifndef __ASSEMBLY__
extern void __init l2x0_init(void __iomem *base, __u32 aux_val, __u32 aux_mask);
diff --git a/arch/arm/include/asm/memblock.h b/arch/arm/include/asm/memblock.h
index fdbc43b2e6c..b8da2e415e4 100644
--- a/arch/arm/include/asm/memblock.h
+++ b/arch/arm/include/asm/memblock.h
@@ -1,13 +1,6 @@
#ifndef _ASM_ARM_MEMBLOCK_H
#define _ASM_ARM_MEMBLOCK_H
-#ifdef CONFIG_MMU
-extern phys_addr_t lowmem_end_addr;
-#define MEMBLOCK_REAL_LIMIT lowmem_end_addr
-#else
-#define MEMBLOCK_REAL_LIMIT 0
-#endif
-
struct meminfo;
struct machine_desc;
diff --git a/arch/arm/include/asm/outercache.h b/arch/arm/include/asm/outercache.h
index 25f76bae57a..fc190092527 100644
--- a/arch/arm/include/asm/outercache.h
+++ b/arch/arm/include/asm/outercache.h
@@ -25,6 +25,9 @@ struct outer_cache_fns {
void (*inv_range)(unsigned long, unsigned long);
void (*clean_range)(unsigned long, unsigned long);
void (*flush_range)(unsigned long, unsigned long);
+ void (*flush_all)(void);
+ void (*inv_all)(void);
+ void (*disable)(void);
#ifdef CONFIG_OUTER_CACHE_SYNC
void (*sync)(void);
#endif
@@ -50,6 +53,24 @@ static inline void outer_flush_range(unsigned long start, unsigned long end)
outer_cache.flush_range(start, end);
}
+static inline void outer_flush_all(void)
+{
+ if (outer_cache.flush_all)
+ outer_cache.flush_all();
+}
+
+static inline void outer_inv_all(void)
+{
+ if (outer_cache.inv_all)
+ outer_cache.inv_all();
+}
+
+static inline void outer_disable(void)
+{
+ if (outer_cache.disable)
+ outer_cache.disable();
+}
+
#else
static inline void outer_inv_range(unsigned long start, unsigned long end)
@@ -58,6 +79,9 @@ static inline void outer_clean_range(unsigned long start, unsigned long end)
{ }
static inline void outer_flush_range(unsigned long start, unsigned long end)
{ }
+static inline void outer_flush_all(void) { }
+static inline void outer_inv_all(void) { }
+static inline void outer_disable(void) { }
#endif
diff --git a/arch/arm/kernel/machine_kexec.c b/arch/arm/kernel/machine_kexec.c
index 1fc74cbd1a1..3a8fd5140d7 100644
--- a/arch/arm/kernel/machine_kexec.c
+++ b/arch/arm/kernel/machine_kexec.c
@@ -78,7 +78,10 @@ void machine_kexec(struct kimage *image)
local_fiq_disable();
setup_mm_for_reboot(0); /* mode is not used, so just pass 0*/
flush_cache_all();
+ outer_flush_all();
+ outer_disable();
cpu_proc_fin();
+ outer_inv_all();
flush_cache_all();
cpu_reset(reboot_code_buffer_phys);
}
diff --git a/arch/arm/kernel/vmlinux.lds.S b/arch/arm/kernel/vmlinux.lds.S
index 1953e3d21ab..cead8893b46 100644
--- a/arch/arm/kernel/vmlinux.lds.S
+++ b/arch/arm/kernel/vmlinux.lds.S
@@ -113,6 +113,7 @@ SECTIONS
*(.rodata.*)
*(.glue_7)
*(.glue_7t)
+ . = ALIGN(4);
*(.got) /* Global offset table */
ARM_CPU_KEEP(PROC_INFO)
}
diff --git a/arch/arm/mach-imx/mach-mx27_3ds.c b/arch/arm/mach-imx/mach-mx27_3ds.c
index b8bbd31aa85..84a5ba03f1b 100644
--- a/arch/arm/mach-imx/mach-mx27_3ds.c
+++ b/arch/arm/mach-imx/mach-mx27_3ds.c
@@ -23,16 +23,20 @@
#include <linux/platform_device.h>
#include <linux/gpio.h>
#include <linux/input/matrix_keypad.h>
+#include <linux/irq.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
#include <mach/hardware.h>
#include <mach/common.h>
#include <mach/iomux-mx27.h>
+#include <mach/mmc.h>
#include "devices-imx27.h"
#include "devices.h"
+#define SD1_EN_GPIO (GPIO_PORTB + 25)
+
static const int mx27pdk_pins[] __initconst = {
/* UART1 */
PE12_PF_UART1_TXD,
@@ -58,6 +62,14 @@ static const int mx27pdk_pins[] __initconst = {
PD15_AOUT_FEC_COL,
PD16_AIN_FEC_TX_ER,
PF23_AIN_FEC_TX_EN,
+ /* SDHC1 */
+ PE18_PF_SD1_D0,
+ PE19_PF_SD1_D1,
+ PE20_PF_SD1_D2,
+ PE21_PF_SD1_D3,
+ PE22_PF_SD1_CMD,
+ PE23_PF_SD1_CLK,
+ SD1_EN_GPIO | GPIO_GPIO | GPIO_OUT,
};
static const struct imxuart_platform_data uart_pdata __initconst = {
@@ -85,13 +97,39 @@ static struct matrix_keymap_data mx27_3ds_keymap_data = {
.keymap_size = ARRAY_SIZE(mx27_3ds_keymap),
};
+static int mx27_3ds_sdhc1_init(struct device *dev, irq_handler_t detect_irq,
+ void *data)
+{
+ return request_irq(IRQ_GPIOB(26), detect_irq, IRQF_TRIGGER_FALLING |
+ IRQF_TRIGGER_RISING, "sdhc1-card-detect", data);
+}
+
+static void mx27_3ds_sdhc1_exit(struct device *dev, void *data)
+{
+ free_irq(IRQ_GPIOB(26), data);
+}
+
+static struct imxmmc_platform_data sdhc1_pdata = {
+ .init = mx27_3ds_sdhc1_init,
+ .exit = mx27_3ds_sdhc1_exit,
+};
+
+static void mx27_3ds_sdhc1_enable_level_translator(void)
+{
+ /* Turn on TXB0108 OE pin */
+ gpio_request(SD1_EN_GPIO, "sd1_enable");
+ gpio_direction_output(SD1_EN_GPIO, 1);
+}
+
static void __init mx27pdk_init(void)
{
mxc_gpio_setup_multiple_pins(mx27pdk_pins, ARRAY_SIZE(mx27pdk_pins),
"mx27pdk");
+ mx27_3ds_sdhc1_enable_level_translator();
imx27_add_imx_uart0(&uart_pdata);
imx27_add_fec(NULL);
mxc_register_device(&imx_kpp_device, &mx27_3ds_keymap_data);
+ mxc_register_device(&mxc_sdhc_device0, &sdhc1_pdata);
}
static void __init mx27pdk_timer_init(void)
diff --git a/arch/arm/mach-ixp2000/core.c b/arch/arm/mach-ixp2000/core.c
index babb2259716..e24e3d05397 100644
--- a/arch/arm/mach-ixp2000/core.c
+++ b/arch/arm/mach-ixp2000/core.c
@@ -197,7 +197,7 @@ unsigned long ixp2000_gettimeoffset (void)
return offset / ticks_per_usec;
}
-static int ixp2000_timer_interrupt(int irq, void *dev_id)
+static irqreturn_t ixp2000_timer_interrupt(int irq, void *dev_id)
{
/* clear timer 1 */
ixp2000_reg_wrb(IXP2000_T1_CLR, 1);
diff --git a/arch/arm/mach-mx25/Kconfig b/arch/arm/mach-mx25/Kconfig
index aa57e35ce3c..38ca09a5df9 100644
--- a/arch/arm/mach-mx25/Kconfig
+++ b/arch/arm/mach-mx25/Kconfig
@@ -6,6 +6,7 @@ config MACH_MX25_3DS
bool "Support MX25PDK (3DS) Platform"
select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_MXC_NAND
+ select IMX_HAVE_PLATFORM_ESDHC
config MACH_EUKREA_CPUIMX25
bool "Support Eukrea CPUIMX25 Platform"
diff --git a/arch/arm/mach-mx25/mach-mx25_3ds.c b/arch/arm/mach-mx25/mach-mx25_3ds.c
index 80805107a73..f8be1eb0c06 100644
--- a/arch/arm/mach-mx25/mach-mx25_3ds.c
+++ b/arch/arm/mach-mx25/mach-mx25_3ds.c
@@ -96,6 +96,14 @@ static struct pad_desc mx25pdk_pads[] = {
MX25_PAD_KPP_COL1__KPP_COL1,
MX25_PAD_KPP_COL2__KPP_COL2,
MX25_PAD_KPP_COL3__KPP_COL3,
+
+ /* SD1 */
+ MX25_PAD_SD1_CMD__SD1_CMD,
+ MX25_PAD_SD1_CLK__SD1_CLK,
+ MX25_PAD_SD1_DATA0__SD1_DATA0,
+ MX25_PAD_SD1_DATA1__SD1_DATA1,
+ MX25_PAD_SD1_DATA2__SD1_DATA2,
+ MX25_PAD_SD1_DATA3__SD1_DATA3,
};
static const struct fec_platform_data mx25_fec_pdata __initconst = {
@@ -193,6 +201,8 @@ static void __init mx25pdk_init(void)
mx25pdk_fec_reset();
imx25_add_fec(&mx25_fec_pdata);
mxc_register_device(&mx25_kpp_device, &mx25pdk_keymap_data);
+
+ imx25_add_esdhc(0, NULL);
}
static void __init mx25pdk_timer_init(void)
diff --git a/arch/arm/mach-mx3/Kconfig b/arch/arm/mach-mx3/Kconfig
index 096fd33f8ab..5000ac1f93e 100644
--- a/arch/arm/mach-mx3/Kconfig
+++ b/arch/arm/mach-mx3/Kconfig
@@ -143,8 +143,10 @@ config MACH_ARMADILLO5X0
config MACH_MX35_3DS
bool "Support MX35PDK platform"
select ARCH_MX35
+ select MXC_DEBUG_BOARD
select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_MXC_NAND
+ select IMX_HAVE_PLATFORM_ESDHC
default n
help
Include support for MX35PDK platform. This includes specific
diff --git a/arch/arm/mach-mx3/devices.c b/arch/arm/mach-mx3/devices.c
index f4dff11aaee..d4da9496089 100644
--- a/arch/arm/mach-mx3/devices.c
+++ b/arch/arm/mach-mx3/devices.c
@@ -72,24 +72,24 @@ struct platform_device mxc_w1_master_device = {
#ifdef CONFIG_ARCH_MX31
static struct resource mxcsdhc0_resources[] = {
{
- .start = MMC_SDHC1_BASE_ADDR,
- .end = MMC_SDHC1_BASE_ADDR + SZ_16K - 1,
+ .start = MX31_MMC_SDHC1_BASE_ADDR,
+ .end = MX31_MMC_SDHC1_BASE_ADDR + SZ_16K - 1,
.flags = IORESOURCE_MEM,
}, {
- .start = MXC_INT_MMC_SDHC1,
- .end = MXC_INT_MMC_SDHC1,
+ .start = MX31_INT_MMC_SDHC1,
+ .end = MX31_INT_MMC_SDHC1,
.flags = IORESOURCE_IRQ,
},
};
static struct resource mxcsdhc1_resources[] = {
{
- .start = MMC_SDHC2_BASE_ADDR,
- .end = MMC_SDHC2_BASE_ADDR + SZ_16K - 1,
+ .start = MX31_MMC_SDHC2_BASE_ADDR,
+ .end = MX31_MMC_SDHC2_BASE_ADDR + SZ_16K - 1,
.flags = IORESOURCE_MEM,
}, {
- .start = MXC_INT_MMC_SDHC2,
- .end = MXC_INT_MMC_SDHC2,
+ .start = MX31_INT_MMC_SDHC2,
+ .end = MX31_INT_MMC_SDHC2,
.flags = IORESOURCE_IRQ,
},
};
diff --git a/arch/arm/mach-mx3/mach-mx31_3ds.c b/arch/arm/mach-mx3/mach-mx31_3ds.c
index 5c1d0e86c91..0ad9e782108 100644
--- a/arch/arm/mach-mx3/mach-mx31_3ds.c
+++ b/arch/arm/mach-mx3/mach-mx31_3ds.c
@@ -38,39 +38,9 @@
#include "devices-imx31.h"
#include "devices.h"
-/* Definitions for components on the Debug board */
-
-/* Base address of CPLD controller on the Debug board */
-#define DEBUG_BASE_ADDRESS CS5_IO_ADDRESS(MX3x_CS5_BASE_ADDR)
-
-/* LAN9217 ethernet base address */
-#define LAN9217_BASE_ADDR MX3x_CS5_BASE_ADDR
-
-/* CPLD config and interrupt base address */
-#define CPLD_ADDR (DEBUG_BASE_ADDRESS + 0x20000)
-
-/* status, interrupt */
-#define CPLD_INT_STATUS_REG (CPLD_ADDR + 0x10)
-#define CPLD_INT_MASK_REG (CPLD_ADDR + 0x38)
-#define CPLD_INT_RESET_REG (CPLD_ADDR + 0x20)
-/* magic word for debug CPLD */
-#define CPLD_MAGIC_NUMBER1_REG (CPLD_ADDR + 0x40)
-#define CPLD_MAGIC_NUMBER2_REG (CPLD_ADDR + 0x48)
-/* CPLD code version */
-#define CPLD_CODE_VER_REG (CPLD_ADDR + 0x50)
-/* magic word for debug CPLD */
-#define CPLD_MAGIC_NUMBER3_REG (CPLD_ADDR + 0x58)
-
/* CPLD IRQ line for external uart, external ethernet etc */
#define EXPIO_PARENT_INT IOMUX_TO_IRQ(MX31_PIN_GPIO1_1)
-#define MXC_EXP_IO_BASE (MXC_BOARD_IRQ_START)
-#define MXC_IRQ_TO_EXPIO(irq) ((irq) - MXC_EXP_IO_BASE)
-
-#define EXPIO_INT_ENET (MXC_EXP_IO_BASE + 0)
-
-#define MXC_MAX_EXP_IO_LINES 16
-
/*
* This file contains the board-specific initialization routines.
*/
@@ -272,7 +242,7 @@ static void __init mxc_board_init(void)
imx31_add_imx_uart0(&uart_pdata);
imx31_add_mxc_nand(&mx31_3ds_nand_board_info);
- imx31_add_spi_imx0(&spi1_pdata);
+ imx31_add_spi_imx1(&spi1_pdata);
spi_register_board_info(mx31_3ds_spi_devs,
ARRAY_SIZE(mx31_3ds_spi_devs));
@@ -281,9 +251,9 @@ static void __init mxc_board_init(void)
mx31_3ds_usbotg_init();
mxc_register_device(&mxc_otg_udc_device, &usbotg_pdata);
- if (!mxc_expio_init(CS5_BASE_ADDR, EXPIO_PARENT_INT))
- printk(KERN_WARNING "Init of the debugboard failed, all "
- "devices on the board are unusable.\n");
+ if (mxc_expio_init(MX31_CS5_BASE_ADDR, EXPIO_PARENT_INT))
+ printk(KERN_WARNING "Init of the debug board failed, all "
+ "devices on the debug board are unusable.\n");
}
static void __init mx31_3ds_timer_init(void)
diff --git a/arch/arm/mach-mx3/mach-mx35_3ds.c b/arch/arm/mach-mx3/mach-mx35_3ds.c
index 05f628d9072..b66a75aa2e8 100644
--- a/arch/arm/mach-mx3/mach-mx35_3ds.c
+++ b/arch/arm/mach-mx3/mach-mx35_3ds.c
@@ -38,11 +38,15 @@
#include <mach/hardware.h>
#include <mach/common.h>
#include <mach/iomux-mx35.h>
+#include <mach/irqs.h>
+#include <mach/3ds_debugboard.h>
#include <mach/mxc_ehci.h>
#include "devices-imx35.h"
#include "devices.h"
+#define EXPIO_PARENT_INT (MXC_INTERNAL_IRQS + GPIO_PORTA + 1)
+
static const struct imxuart_platform_data uart_pdata __initconst = {
.flags = IMXUART_HAVE_RTSCTS,
};
@@ -108,6 +112,13 @@ static struct pad_desc mx35pdk_pads[] = {
/* USBH1 */
MX35_PAD_I2C2_CLK__USB_TOP_USBH2_PWR,
MX35_PAD_I2C2_DAT__USB_TOP_USBH2_OC,
+ /* SDCARD */
+ MX35_PAD_SD1_CMD__ESDHC1_CMD,
+ MX35_PAD_SD1_CLK__ESDHC1_CLK,
+ MX35_PAD_SD1_DATA0__ESDHC1_DAT0,
+ MX35_PAD_SD1_DATA1__ESDHC1_DAT1,
+ MX35_PAD_SD1_DATA2__ESDHC1_DAT2,
+ MX35_PAD_SD1_DATA3__ESDHC1_DAT3,
};
/* OTG config */
@@ -140,6 +151,11 @@ static void __init mxc_board_init(void)
mxc_register_device(&mxc_usbh1, &usb_host_pdata);
imx35_add_mxc_nand(&mx35pdk_nand_board_info);
+ imx35_add_esdhc(0, NULL);
+
+ if (mxc_expio_init(MX35_CS5_BASE_ADDR, EXPIO_PARENT_INT))
+ pr_warn("Init of the debugboard failed, all "
+ "devices on the debugboard are unusable.\n");
}
static void __init mx35pdk_timer_init(void)
diff --git a/arch/arm/mach-mx5/Kconfig b/arch/arm/mach-mx5/Kconfig
index a2df9ac3799..3ec910a7a18 100644
--- a/arch/arm/mach-mx5/Kconfig
+++ b/arch/arm/mach-mx5/Kconfig
@@ -6,6 +6,7 @@ config ARCH_MX51
select MXC_TZIC
select ARCH_MXC_IOMUX_V3
select ARCH_MXC_AUDMUX_V2
+ select ARCH_HAS_CPUFREQ
comment "MX5 platforms:"
@@ -13,6 +14,7 @@ config MACH_MX51_BABBAGE
bool "Support MX51 BABBAGE platforms"
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_IMX_UART
+ select IMX_HAVE_PLATFORM_ESDHC
help
Include support for MX51 Babbage platform, also known as MX51EVK in
u-boot. This includes specific configurations for the board and its
diff --git a/arch/arm/mach-mx5/Makefile b/arch/arm/mach-mx5/Makefile
index 1769c161a60..462f177eddf 100644
--- a/arch/arm/mach-mx5/Makefile
+++ b/arch/arm/mach-mx5/Makefile
@@ -5,6 +5,7 @@
# Object file lists.
obj-y := cpu.o mm.o clock-mx51.o devices.o
+obj-$(CONFIG_CPU_FREQ_IMX) += cpu_op-mx51.o
obj-$(CONFIG_MACH_MX51_BABBAGE) += board-mx51_babbage.o
obj-$(CONFIG_MACH_MX51_3DS) += board-mx51_3ds.o
obj-$(CONFIG_MACH_EUKREA_CPUIMX51) += board-cpuimx51.o
diff --git a/arch/arm/mach-mx5/board-mx51_babbage.c b/arch/arm/mach-mx5/board-mx51_babbage.c
index 0821fe9b3b2..acbe30df2e6 100644
--- a/arch/arm/mach-mx5/board-mx51_babbage.c
+++ b/arch/arm/mach-mx5/board-mx51_babbage.c
@@ -1,5 +1,5 @@
/*
- * Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved.
* Copyright (C) 2009-2010 Amit Kucheria <amit.kucheria@canonical.com>
*
* The code contained herein is licensed under the GNU General Public
@@ -18,6 +18,8 @@
#include <linux/io.h>
#include <linux/fsl_devices.h>
#include <linux/fec.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
#include <mach/common.h>
#include <mach/hardware.h>
@@ -32,11 +34,13 @@
#include "devices-imx51.h"
#include "devices.h"
+#include "cpu_op-mx51.h"
#define BABBAGE_USB_HUB_RESET (0*32 + 7) /* GPIO_1_7 */
#define BABBAGE_USBH1_STP (0*32 + 27) /* GPIO_1_27 */
#define BABBAGE_PHY_RESET (1*32 + 5) /* GPIO_2_5 */
#define BABBAGE_FEC_PHY_RESET (1*32 + 14) /* GPIO_2_14 */
+#define BABBAGE_POWER_KEY (1*32 + 21) /* GPIO_2_21 */
/* USB_CTRL_1 */
#define MX51_USB_CTRL_1_OFFSET 0x10
@@ -46,6 +50,21 @@
#define MX51_USB_PLL_DIV_19_2_MHZ 0x01
#define MX51_USB_PLL_DIV_24_MHZ 0x02
+static struct gpio_keys_button babbage_buttons[] = {
+ {
+ .gpio = BABBAGE_POWER_KEY,
+ .code = BTN_0,
+ .desc = "PWR",
+ .active_low = 1,
+ .wakeup = 1,
+ },
+};
+
+static const struct gpio_keys_platform_data imx_button_data __initconst = {
+ .buttons = babbage_buttons,
+ .nbuttons = ARRAY_SIZE(babbage_buttons),
+};
+
static struct pad_desc mx51babbage_pads[] = {
/* UART1 */
MX51_PAD_UART1_RXD__UART1_RXD,
@@ -112,6 +131,22 @@ static struct pad_desc mx51babbage_pads[] = {
/* FEC PHY reset line */
MX51_PAD_EIM_A20__GPIO_2_14,
+
+ /* SD 1 */
+ MX51_PAD_SD1_CMD__SD1_CMD,
+ MX51_PAD_SD1_CLK__SD1_CLK,
+ MX51_PAD_SD1_DATA0__SD1_DATA0,
+ MX51_PAD_SD1_DATA1__SD1_DATA1,
+ MX51_PAD_SD1_DATA2__SD1_DATA2,
+ MX51_PAD_SD1_DATA3__SD1_DATA3,
+
+ /* SD 2 */
+ MX51_PAD_SD2_CMD__SD2_CMD,
+ MX51_PAD_SD2_CLK__SD2_CLK,
+ MX51_PAD_SD2_DATA0__SD2_DATA0,
+ MX51_PAD_SD2_DATA1__SD2_DATA1,
+ MX51_PAD_SD2_DATA2__SD2_DATA2,
+ MX51_PAD_SD2_DATA3__SD2_DATA3,
};
/* Serial ports */
@@ -281,13 +316,22 @@ __setup("otg_mode=", babbage_otg_mode);
static void __init mxc_board_init(void)
{
struct pad_desc usbh1stp = MX51_PAD_USBH1_STP__USBH1_STP;
+ struct pad_desc power_key = MX51_PAD_EIM_A27__GPIO_2_21;
+#if defined(CONFIG_CPU_FREQ_IMX)
+ get_cpu_op = mx51_get_cpu_op;
+#endif
mxc_iomux_v3_setup_multiple_pads(mx51babbage_pads,
ARRAY_SIZE(mx51babbage_pads));
mxc_init_imx_uart();
babbage_fec_reset();
imx51_add_fec(NULL);
+ /* Set the PAD settings for the pwr key. */
+ power_key.pad_ctrl = MX51_GPIO_PAD_CTRL_2;
+ mxc_iomux_v3_setup_pad(&power_key);
+ imx51_add_gpio_keys(&imx_button_data);
+
imx51_add_imx_i2c(0, &babbage_i2c_data);
imx51_add_imx_i2c(1, &babbage_i2c_data);
mxc_register_device(&mxc_hsi2c_device, &babbage_hsi2c_data);
@@ -304,6 +348,9 @@ static void __init mxc_board_init(void)
/* setback USBH1_STP to be function */
mxc_iomux_v3_setup_pad(&usbh1stp);
babbage_usbhub_reset();
+
+ imx51_add_esdhc(0, NULL);
+ imx51_add_esdhc(1, NULL);
}
static void __init mx51_babbage_timer_init(void)
diff --git a/arch/arm/mach-mx5/clock-mx51.c b/arch/arm/mach-mx5/clock-mx51.c
index f2aae92cf0e..8ac36d88292 100644
--- a/arch/arm/mach-mx5/clock-mx51.c
+++ b/arch/arm/mach-mx5/clock-mx51.c
@@ -362,7 +362,7 @@ static int _clk_lp_apm_set_parent(struct clk *clk, struct clk *parent)
return 0;
}
-static unsigned long clk_arm_get_rate(struct clk *clk)
+static unsigned long clk_cpu_get_rate(struct clk *clk)
{
u32 cacrr, div;
unsigned long parent_rate;
@@ -374,6 +374,22 @@ static unsigned long clk_arm_get_rate(struct clk *clk)
return parent_rate / div;
}
+static int clk_cpu_set_rate(struct clk *clk, unsigned long rate)
+{
+ u32 reg, cpu_podf;
+ unsigned long parent_rate;
+
+ parent_rate = clk_get_rate(clk->parent);
+ cpu_podf = parent_rate / rate - 1;
+ /* use post divider to change freq */
+ reg = __raw_readl(MXC_CCM_CACRR);
+ reg &= ~MXC_CCM_CACRR_ARM_PODF_MASK;
+ reg |= cpu_podf << MXC_CCM_CACRR_ARM_PODF_OFFSET;
+ __raw_writel(reg, MXC_CCM_CACRR);
+
+ return 0;
+}
+
static int _clk_periph_apm_set_parent(struct clk *clk, struct clk *parent)
{
u32 reg, mux;
@@ -736,7 +752,8 @@ static struct clk periph_apm_clk = {
static struct clk cpu_clk = {
.parent = &pll1_sw_clk,
- .get_rate = clk_arm_get_rate,
+ .get_rate = clk_cpu_get_rate,
+ .set_rate = clk_cpu_set_rate,
};
static struct clk ahb_clk = {
@@ -1064,6 +1081,7 @@ static struct clk_lookup lookups[] = {
_REGISTER_CLOCK("imx51-cspi.0", NULL, cspi_clk)
_REGISTER_CLOCK("sdhci-esdhc-imx.0", NULL, esdhc1_clk)
_REGISTER_CLOCK("sdhci-esdhc-imx.1", NULL, esdhc2_clk)
+ _REGISTER_CLOCK(NULL, "cpu_clk", cpu_clk)
};
static void clk_tree_init(void)
diff --git a/arch/arm/mach-mx5/cpu_op-mx51.c b/arch/arm/mach-mx5/cpu_op-mx51.c
new file mode 100644
index 00000000000..9d34c3d4c02
--- /dev/null
+++ b/arch/arm/mach-mx5/cpu_op-mx51.c
@@ -0,0 +1,29 @@
+/*
+ * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/types.h>
+#include <mach/hardware.h>
+#include <linux/kernel.h>
+
+static struct cpu_op mx51_cpu_op[] = {
+ {
+ .cpu_rate = 160000000,},
+ {
+ .cpu_rate = 800000000,},
+};
+
+struct cpu_op *mx51_get_cpu_op(int *op)
+{
+ *op = ARRAY_SIZE(mx51_cpu_op);
+ return mx51_cpu_op;
+}
diff --git a/arch/arm/mach-mx5/cpu_op-mx51.h b/arch/arm/mach-mx5/cpu_op-mx51.h
new file mode 100644
index 00000000000..97477fecb46
--- /dev/null
+++ b/arch/arm/mach-mx5/cpu_op-mx51.h
@@ -0,0 +1,14 @@
+/*
+ * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+extern struct cpu_op *mx51_get_cpu_op(int *op);
diff --git a/arch/arm/mach-mx5/devices-imx51.h b/arch/arm/mach-mx5/devices-imx51.h
index 5cc910e6053..8c50cb5d05f 100644
--- a/arch/arm/mach-mx5/devices-imx51.h
+++ b/arch/arm/mach-mx5/devices-imx51.h
@@ -13,6 +13,8 @@ extern const struct imx_fec_data imx51_fec_data __initconst;
#define imx51_add_fec(pdata) \
imx_add_fec(&imx51_fec_data, pdata)
+#define imx51_add_gpio_keys(pdata) imx_add_gpio_keys(pdata)
+
extern const struct imx_imx_i2c_data imx51_imx_i2c_data[] __initconst;
#define imx51_add_imx_i2c(id, pdata) \
imx_add_imx_i2c(&imx51_imx_i2c_data[id], pdata)
diff --git a/arch/arm/mach-omap2/omap4-common.c b/arch/arm/mach-omap2/omap4-common.c
index 923f9f5f91c..2f895553e6a 100644
--- a/arch/arm/mach-omap2/omap4-common.c
+++ b/arch/arm/mach-omap2/omap4-common.c
@@ -44,6 +44,13 @@ void __init gic_init_irq(void)
}
#ifdef CONFIG_CACHE_L2X0
+
+static void omap4_l2x0_disable(void)
+{
+ /* Disable PL310 L2 Cache controller */
+ omap_smc1(0x102, 0x0);
+}
+
static int __init omap_l2_cache_init(void)
{
/*
@@ -70,6 +77,12 @@ static int __init omap_l2_cache_init(void)
else
l2x0_init(l2cache_base, 0x0e070000, 0xc0000fff);
+ /*
+ * Override default outer_cache.disable with a OMAP4
+ * specific one
+ */
+ outer_cache.disable = omap4_l2x0_disable;
+
return 0;
}
early_initcall(omap_l2_cache_init);
diff --git a/arch/arm/mach-s3c2410/include/mach/gpio.h b/arch/arm/mach-s3c2410/include/mach/gpio.h
index b649bf2ccd5..f7f6b07df30 100644
--- a/arch/arm/mach-s3c2410/include/mach/gpio.h
+++ b/arch/arm/mach-s3c2410/include/mach/gpio.h
@@ -22,6 +22,8 @@
#ifdef CONFIG_CPU_S3C244X
#define ARCH_NR_GPIOS (32 * 9 + CONFIG_S3C24XX_GPIO_EXTRA)
+#elif defined(CONFIG_CPU_S3C2443) || defined(CONFIG_CPU_S3C2416)
+#define ARCH_NR_GPIOS (32 * 12 + CONFIG_S3C24XX_GPIO_EXTRA)
#else
#define ARCH_NR_GPIOS (256 + CONFIG_S3C24XX_GPIO_EXTRA)
#endif
@@ -30,8 +32,10 @@
#include <mach/gpio-nrs.h>
#include <mach/gpio-fns.h>
-#ifdef CONFIG_CPU_S3C24XX
-#define S3C_GPIO_END (S3C2410_GPIO_BANKJ + 32)
+#ifdef CONFIG_CPU_S3C244X
+#define S3C_GPIO_END (S3C2410_GPJ(0) + 32)
+#elif defined(CONFIG_CPU_S3C2443) || defined(CONFIG_CPU_S3C2416)
+#define S3C_GPIO_END (S3C2410_GPM(0) + 32)
#else
-#define S3C_GPIO_END (S3C2410_GPIO_BANKH + 32)
+#define S3C_GPIO_END (S3C2410_GPH(0) + 32)
#endif
diff --git a/arch/arm/mach-s3c2410/include/mach/regs-s3c2443-clock.h b/arch/arm/mach-s3c2410/include/mach/regs-s3c2443-clock.h
index 08ab9dfb6ae..101aeea2231 100644
--- a/arch/arm/mach-s3c2410/include/mach/regs-s3c2443-clock.h
+++ b/arch/arm/mach-s3c2410/include/mach/regs-s3c2443-clock.h
@@ -118,6 +118,8 @@
#define S3C2443_SCLKCON_UARTCLK (1<<8)
#define S3C2443_SCLKCON_USBHOST (1<<1)
+#define S3C2443_PWRCFG_SLEEP (1<<15)
+
#include <asm/div64.h>
static inline unsigned int
diff --git a/arch/arm/mach-s3c2410/include/mach/vmalloc.h b/arch/arm/mach-s3c2410/include/mach/vmalloc.h
index 54297eb0bf5..7a311e8dddb 100644
--- a/arch/arm/mach-s3c2410/include/mach/vmalloc.h
+++ b/arch/arm/mach-s3c2410/include/mach/vmalloc.h
@@ -15,6 +15,6 @@
#ifndef __ASM_ARCH_VMALLOC_H
#define __ASM_ARCH_VMALLOC_H
-#define VMALLOC_END 0xE0000000UL
+#define VMALLOC_END 0xF6000000UL
#endif /* __ASM_ARCH_VMALLOC_H */
diff --git a/arch/arm/mach-s3c2412/s3c2412.c b/arch/arm/mach-s3c2412/s3c2412.c
index bef39f77729..4c6df51ddf3 100644
--- a/arch/arm/mach-s3c2412/s3c2412.c
+++ b/arch/arm/mach-s3c2412/s3c2412.c
@@ -51,6 +51,7 @@
#include <plat/clock.h>
#include <plat/pm.h>
#include <plat/pll.h>
+#include <plat/nand-core.h>
#ifndef CONFIG_CPU_S3C2412_ONLY
void __iomem *s3c24xx_va_gpio2 = S3C24XX_VA_GPIO;
@@ -92,7 +93,7 @@ void __init s3c2412_init_uarts(struct s3c2410_uartcfg *cfg, int no)
/* rename devices that are s3c2412/s3c2413 specific */
s3c_device_sdi.name = "s3c2412-sdi";
s3c_device_lcd.name = "s3c2412-lcd";
- s3c_device_nand.name = "s3c2412-nand";
+ s3c_nand_setname("s3c2412-nand");
/* alter IRQ of SDI controller */
diff --git a/arch/arm/mach-s3c2416/Kconfig b/arch/arm/mach-s3c2416/Kconfig
index 657e4fe17f3..87b9c9f003b 100644
--- a/arch/arm/mach-s3c2416/Kconfig
+++ b/arch/arm/mach-s3c2416/Kconfig
@@ -25,6 +25,11 @@ config S3C2416_DMA
help
Internal config node for S3C2416 DMA support
+config S3C2416_PM
+ bool
+ help
+ Internal config node to apply S3C2416 power management
+
menu "S3C2416 Machines"
config MACH_SMDK2416
@@ -33,6 +38,7 @@ config MACH_SMDK2416
select S3C_DEV_FB
select S3C_DEV_HSMMC
select S3C_DEV_HSMMC1
+ select S3C2416_PM if PM
help
Say Y here if you are using an SMDK2416
diff --git a/arch/arm/mach-s3c2416/Makefile b/arch/arm/mach-s3c2416/Makefile
index 6c12c7bf40a..ef038d62ffd 100644
--- a/arch/arm/mach-s3c2416/Makefile
+++ b/arch/arm/mach-s3c2416/Makefile
@@ -11,7 +11,7 @@ obj- :=
obj-$(CONFIG_CPU_S3C2416) += s3c2416.o clock.o
obj-$(CONFIG_CPU_S3C2416) += irq.o
-
+obj-$(CONFIG_S3C2416_PM) += pm.o
#obj-$(CONFIG_S3C2416_DMA) += dma.o
# Machine support
diff --git a/arch/arm/mach-s3c2416/irq.c b/arch/arm/mach-s3c2416/irq.c
index 89f521d59d0..084d121f368 100644
--- a/arch/arm/mach-s3c2416/irq.c
+++ b/arch/arm/mach-s3c2416/irq.c
@@ -243,6 +243,8 @@ static int __init s3c2416_irq_add(struct sys_device *sysdev)
static struct sysdev_driver s3c2416_irq_driver = {
.add = s3c2416_irq_add,
+ .suspend = s3c24xx_irq_suspend,
+ .resume = s3c24xx_irq_resume,
};
static int __init s3c2416_irq_init(void)
diff --git a/arch/arm/mach-s3c2416/pm.c b/arch/arm/mach-s3c2416/pm.c
new file mode 100644
index 00000000000..4a04205b04d
--- /dev/null
+++ b/arch/arm/mach-s3c2416/pm.c
@@ -0,0 +1,84 @@
+/* linux/arch/arm/mach-s3c2416/pm.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * S3C2416 - PM support (Based on Ben Dooks' S3C2412 PM support)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/sysdev.h>
+#include <linux/io.h>
+
+#include <asm/cacheflush.h>
+
+#include <mach/regs-power.h>
+#include <mach/regs-s3c2443-clock.h>
+
+#include <plat/cpu.h>
+#include <plat/pm.h>
+
+extern void s3c2412_sleep_enter(void);
+
+static void s3c2416_cpu_suspend(void)
+{
+ flush_cache_all();
+
+ /* enable wakeup sources regardless of battery state */
+ __raw_writel(S3C2443_PWRCFG_SLEEP, S3C2443_PWRCFG);
+
+ /* set the mode as sleep, 2BED represents "Go to BED" */
+ __raw_writel(0x2BED, S3C2443_PWRMODE);
+
+ s3c2412_sleep_enter();
+}
+
+static void s3c2416_pm_prepare(void)
+{
+ /*
+ * write the magic value u-boot uses to check for resume into
+ * the INFORM0 register, and ensure INFORM1 is set to the
+ * correct address to resume from.
+ */
+ __raw_writel(0x2BED, S3C2412_INFORM0);
+ __raw_writel(virt_to_phys(s3c_cpu_resume), S3C2412_INFORM1);
+}
+
+static int s3c2416_pm_add(struct sys_device *sysdev)
+{
+ pm_cpu_prep = s3c2416_pm_prepare;
+ pm_cpu_sleep = s3c2416_cpu_suspend;
+
+ return 0;
+}
+
+static int s3c2416_pm_suspend(struct sys_device *dev, pm_message_t state)
+{
+ return 0;
+}
+
+static int s3c2416_pm_resume(struct sys_device *dev)
+{
+ /* unset the return-from-sleep amd inform flags */
+ __raw_writel(0x0, S3C2443_PWRMODE);
+ __raw_writel(0x0, S3C2412_INFORM0);
+ __raw_writel(0x0, S3C2412_INFORM1);
+
+ return 0;
+}
+
+static struct sysdev_driver s3c2416_pm_driver = {
+ .add = s3c2416_pm_add,
+ .suspend = s3c2416_pm_suspend,
+ .resume = s3c2416_pm_resume,
+};
+
+static __init int s3c2416_pm_init(void)
+{
+ return sysdev_driver_register(&s3c2416_sysclass, &s3c2416_pm_driver);
+}
+
+arch_initcall(s3c2416_pm_init);
diff --git a/arch/arm/mach-s3c2416/s3c2416.c b/arch/arm/mach-s3c2416/s3c2416.c
index bc30245e133..63f39cdc097 100644
--- a/arch/arm/mach-s3c2416/s3c2416.c
+++ b/arch/arm/mach-s3c2416/s3c2416.c
@@ -56,6 +56,7 @@
#include <plat/iic-core.h>
#include <plat/fb-core.h>
+#include <plat/nand-core.h>
static struct map_desc s3c2416_iodesc[] __initdata = {
IODESC_ENT(WATCHDOG),
@@ -100,7 +101,7 @@ void __init s3c2416_init_uarts(struct s3c2410_uartcfg *cfg, int no)
{
s3c24xx_init_uartdevs("s3c2440-uart", s3c2410_uart_resources, cfg, no);
- s3c_device_nand.name = "s3c2416-nand";
+ s3c_nand_setname("s3c2412-nand");
}
/* s3c2416_map_io
diff --git a/arch/arm/mach-s3c2440/s3c244x.c b/arch/arm/mach-s3c2440/s3c244x.c
index 5e4a97e7653..90c1707b9c9 100644
--- a/arch/arm/mach-s3c2440/s3c244x.c
+++ b/arch/arm/mach-s3c2440/s3c244x.c
@@ -44,6 +44,7 @@
#include <plat/cpu.h>
#include <plat/pm.h>
#include <plat/pll.h>
+#include <plat/nand-core.h>
static struct map_desc s3c244x_iodesc[] __initdata = {
IODESC_ENT(CLKPWR),
@@ -68,7 +69,7 @@ void __init s3c244x_map_io(void)
s3c_device_sdi.name = "s3c2440-sdi";
s3c_device_i2c0.name = "s3c2440-i2c";
- s3c_device_nand.name = "s3c2440-nand";
+ s3c_nand_setname("s3c2440-nand");
s3c_device_ts.name = "s3c2440-ts";
s3c_device_usbgadget.name = "s3c2440-usbgadget";
}
diff --git a/arch/arm/mach-s3c2443/s3c2443.c b/arch/arm/mach-s3c2443/s3c2443.c
index 839b6b2ced7..33d18dd1ebd 100644
--- a/arch/arm/mach-s3c2443/s3c2443.c
+++ b/arch/arm/mach-s3c2443/s3c2443.c
@@ -36,6 +36,7 @@
#include <plat/devs.h>
#include <plat/cpu.h>
#include <plat/fb-core.h>
+#include <plat/nand-core.h>
static struct map_desc s3c2443_iodesc[] __initdata = {
IODESC_ENT(WATCHDOG),
@@ -62,7 +63,7 @@ int __init s3c2443_init(void)
s3c24xx_reset_hook = s3c2443_hard_reset;
- s3c_device_nand.name = "s3c2412-nand";
+ s3c_nand_setname("s3c2412-nand");
s3c_fb_setname("s3c2443-fb");
/* change WDT IRQ number */
diff --git a/arch/arm/mach-s3c24a0/include/mach/vmalloc.h b/arch/arm/mach-s3c24a0/include/mach/vmalloc.h
index 91465682079..6480b15277f 100644
--- a/arch/arm/mach-s3c24a0/include/mach/vmalloc.h
+++ b/arch/arm/mach-s3c24a0/include/mach/vmalloc.h
@@ -12,6 +12,6 @@
#ifndef __ASM_ARCH_VMALLOC_H
#define __ASM_ARCH_VMALLOC_H
-#define VMALLOC_END (0xe0000000UL)
+#define VMALLOC_END 0xF6000000UL
#endif /* __ASM_ARCH_VMALLOC_H */
diff --git a/arch/arm/mach-s3c64xx/Kconfig b/arch/arm/mach-s3c64xx/Kconfig
index 546db5cb892..1ca7bdc6485 100644
--- a/arch/arm/mach-s3c64xx/Kconfig
+++ b/arch/arm/mach-s3c64xx/Kconfig
@@ -98,12 +98,33 @@ config MACH_ANW6410
help
Machine support for the A&W6410
+config MACH_MINI6410
+ bool "MINI6410"
+ select CPU_S3C6410
+ select S3C_DEV_HSMMC
+ select S3C_DEV_HSMMC1
+ select S3C64XX_SETUP_SDHCI
+ select S3C_DEV_USB_HOST
+ select S3C_DEV_NAND
+ select S3C_DEV_FB
+ select S3C64XX_SETUP_FB_24BPP
+ select SAMSUNG_DEV_ADC
+ select SAMSUNG_DEV_TS
+ help
+ Machine support for the FriendlyARM MINI6410
+
config MACH_REAL6410
bool "REAL6410"
select CPU_S3C6410
select S3C_DEV_HSMMC
select S3C_DEV_HSMMC1
select S3C64XX_SETUP_SDHCI
+ select S3C_DEV_FB
+ select S3C64XX_SETUP_FB_24BPP
+ select S3C_DEV_NAND
+ select SAMSUNG_DEV_ADC
+ select SAMSUNG_DEV_TS
+ select S3C_DEV_USB_HOST
help
Machine support for the CoreWind REAL6410
diff --git a/arch/arm/mach-s3c64xx/Makefile b/arch/arm/mach-s3c64xx/Makefile
index 90221a2e0c5..4657363f067 100644
--- a/arch/arm/mach-s3c64xx/Makefile
+++ b/arch/arm/mach-s3c64xx/Makefile
@@ -53,6 +53,7 @@ obj-$(CONFIG_MACH_ANW6410) += mach-anw6410.o
obj-$(CONFIG_MACH_SMDK6400) += mach-smdk6400.o
obj-$(CONFIG_MACH_SMDK6410) += mach-smdk6410.o
obj-$(CONFIG_MACH_REAL6410) += mach-real6410.o
+obj-$(CONFIG_MACH_MINI6410) += mach-mini6410.o
obj-$(CONFIG_MACH_NCP) += mach-ncp.o
obj-$(CONFIG_MACH_HMT) += mach-hmt.o
obj-$(CONFIG_MACH_SMARTQ) += mach-smartq.o
diff --git a/arch/arm/mach-s3c64xx/dev-audio.c b/arch/arm/mach-s3c64xx/dev-audio.c
index 3838335f125..76426a32c01 100644
--- a/arch/arm/mach-s3c64xx/dev-audio.c
+++ b/arch/arm/mach-s3c64xx/dev-audio.c
@@ -22,27 +22,16 @@
#include <plat/audio.h>
#include <plat/gpio-cfg.h>
-#include <mach/gpio-bank-c.h>
-#include <mach/gpio-bank-d.h>
-#include <mach/gpio-bank-e.h>
-#include <mach/gpio-bank-h.h>
-
static int s3c64xx_i2sv3_cfg_gpio(struct platform_device *pdev)
{
+ unsigned int base;
+
switch (pdev->id) {
case 0:
- s3c_gpio_cfgpin(S3C64XX_GPD(0), S3C64XX_GPD0_I2S0_CLK);
- s3c_gpio_cfgpin(S3C64XX_GPD(1), S3C64XX_GPD1_I2S0_CDCLK);
- s3c_gpio_cfgpin(S3C64XX_GPD(2), S3C64XX_GPD2_I2S0_LRCLK);
- s3c_gpio_cfgpin(S3C64XX_GPD(3), S3C64XX_GPD3_I2S0_DI);
- s3c_gpio_cfgpin(S3C64XX_GPD(4), S3C64XX_GPD4_I2S0_D0);
+ base = S3C64XX_GPD(0);
break;
case 1:
- s3c_gpio_cfgpin(S3C64XX_GPE(0), S3C64XX_GPE0_I2S1_CLK);
- s3c_gpio_cfgpin(S3C64XX_GPE(1), S3C64XX_GPE1_I2S1_CDCLK);
- s3c_gpio_cfgpin(S3C64XX_GPE(2), S3C64XX_GPE2_I2S1_LRCLK);
- s3c_gpio_cfgpin(S3C64XX_GPE(3), S3C64XX_GPE3_I2S1_DI);
- s3c_gpio_cfgpin(S3C64XX_GPE(4), S3C64XX_GPE4_I2S1_D0);
+ base = S3C64XX_GPE(0);
break;
default:
printk(KERN_DEBUG "Invalid I2S Controller number: %d\n",
@@ -50,18 +39,17 @@ static int s3c64xx_i2sv3_cfg_gpio(struct platform_device *pdev)
return -EINVAL;
}
+ s3c_gpio_cfgpin_range(base, 5, S3C_GPIO_SFN(3));
+
return 0;
}
static int s3c64xx_i2sv4_cfg_gpio(struct platform_device *pdev)
{
- s3c_gpio_cfgpin(S3C64XX_GPC(4), S3C64XX_GPC4_I2S_V40_DO0);
- s3c_gpio_cfgpin(S3C64XX_GPC(5), S3C64XX_GPC5_I2S_V40_DO1);
- s3c_gpio_cfgpin(S3C64XX_GPC(7), S3C64XX_GPC7_I2S_V40_DO2);
- s3c_gpio_cfgpin(S3C64XX_GPH(6), S3C64XX_GPH6_I2S_V40_BCLK);
- s3c_gpio_cfgpin(S3C64XX_GPH(7), S3C64XX_GPH7_I2S_V40_CDCLK);
- s3c_gpio_cfgpin(S3C64XX_GPH(8), S3C64XX_GPH8_I2S_V40_LRCLK);
- s3c_gpio_cfgpin(S3C64XX_GPH(9), S3C64XX_GPH9_I2S_V40_DI);
+ s3c_gpio_cfgpin(S3C64XX_GPC(4), S3C_GPIO_SFN(5));
+ s3c_gpio_cfgpin(S3C64XX_GPC(5), S3C_GPIO_SFN(5));
+ s3c_gpio_cfgpin(S3C64XX_GPC(7), S3C_GPIO_SFN(5));
+ s3c_gpio_cfgpin_range(S3C64XX_GPH(6), 4, S3C_GPIO_SFN(5));
return 0;
}
@@ -170,20 +158,14 @@ EXPORT_SYMBOL(s3c64xx_device_iisv4);
static int s3c64xx_pcm_cfg_gpio(struct platform_device *pdev)
{
+ unsigned int base;
+
switch (pdev->id) {
case 0:
- s3c_gpio_cfgpin(S3C64XX_GPD(0), S3C64XX_GPD0_PCM0_SCLK);
- s3c_gpio_cfgpin(S3C64XX_GPD(1), S3C64XX_GPD1_PCM0_EXTCLK);
- s3c_gpio_cfgpin(S3C64XX_GPD(2), S3C64XX_GPD2_PCM0_FSYNC);
- s3c_gpio_cfgpin(S3C64XX_GPD(3), S3C64XX_GPD3_PCM0_SIN);
- s3c_gpio_cfgpin(S3C64XX_GPD(4), S3C64XX_GPD4_PCM0_SOUT);
+ base = S3C64XX_GPD(0);
break;
case 1:
- s3c_gpio_cfgpin(S3C64XX_GPE(0), S3C64XX_GPE0_PCM1_SCLK);
- s3c_gpio_cfgpin(S3C64XX_GPE(1), S3C64XX_GPE1_PCM1_EXTCLK);
- s3c_gpio_cfgpin(S3C64XX_GPE(2), S3C64XX_GPE2_PCM1_FSYNC);
- s3c_gpio_cfgpin(S3C64XX_GPE(3), S3C64XX_GPE3_PCM1_SIN);
- s3c_gpio_cfgpin(S3C64XX_GPE(4), S3C64XX_GPE4_PCM1_SOUT);
+ base = S3C64XX_GPE(0);
break;
default:
printk(KERN_DEBUG "Invalid PCM Controller number: %d\n",
@@ -191,6 +173,7 @@ static int s3c64xx_pcm_cfg_gpio(struct platform_device *pdev)
return -EINVAL;
}
+ s3c_gpio_cfgpin_range(base, 5, S3C_GPIO_SFN(2));
return 0;
}
@@ -264,24 +247,12 @@ EXPORT_SYMBOL(s3c64xx_device_pcm1);
static int s3c64xx_ac97_cfg_gpd(struct platform_device *pdev)
{
- s3c_gpio_cfgpin(S3C64XX_GPD(0), S3C64XX_GPD0_AC97_BITCLK);
- s3c_gpio_cfgpin(S3C64XX_GPD(1), S3C64XX_GPD1_AC97_nRESET);
- s3c_gpio_cfgpin(S3C64XX_GPD(2), S3C64XX_GPD2_AC97_SYNC);
- s3c_gpio_cfgpin(S3C64XX_GPD(3), S3C64XX_GPD3_AC97_SDI);
- s3c_gpio_cfgpin(S3C64XX_GPD(4), S3C64XX_GPD4_AC97_SDO);
-
- return 0;
+ return s3c_gpio_cfgpin_range(S3C64XX_GPD(0), 5, S3C_GPIO_SFN(4));
}
static int s3c64xx_ac97_cfg_gpe(struct platform_device *pdev)
{
- s3c_gpio_cfgpin(S3C64XX_GPE(0), S3C64XX_GPE0_AC97_BITCLK);
- s3c_gpio_cfgpin(S3C64XX_GPE(1), S3C64XX_GPE1_AC97_nRESET);
- s3c_gpio_cfgpin(S3C64XX_GPE(2), S3C64XX_GPE2_AC97_SYNC);
- s3c_gpio_cfgpin(S3C64XX_GPE(3), S3C64XX_GPE3_AC97_SDI);
- s3c_gpio_cfgpin(S3C64XX_GPE(4), S3C64XX_GPE4_AC97_SDO);
-
- return 0;
+ return s3c_gpio_cfgpin_range(S3C64XX_GPE(0), 5, S3C_GPIO_SFN(4));
}
static struct resource s3c64xx_ac97_resource[] = {
diff --git a/arch/arm/mach-s3c64xx/gpiolib.c b/arch/arm/mach-s3c64xx/gpiolib.c
index 300dee4a667..fd99a82e82c 100644
--- a/arch/arm/mach-s3c64xx/gpiolib.c
+++ b/arch/arm/mach-s3c64xx/gpiolib.c
@@ -195,11 +195,6 @@ static struct s3c_gpio_cfg gpio_2bit_cfg_eint11 = {
.get_pull = s3c_gpio_getpull_updown,
};
-int s3c64xx_gpio2int_gpn(struct gpio_chip *chip, unsigned pin)
-{
- return IRQ_EINT(0) + pin;
-}
-
static struct s3c_gpio_chip gpio_2bit[] = {
{
.base = S3C64XX_GPF_BASE,
@@ -227,12 +222,13 @@ static struct s3c_gpio_chip gpio_2bit[] = {
},
}, {
.base = S3C64XX_GPN_BASE,
+ .irq_base = IRQ_EINT(0),
.config = &gpio_2bit_cfg_eint10,
.chip = {
.base = S3C64XX_GPN(0),
.ngpio = S3C64XX_GPIO_N_NR,
.label = "GPN",
- .to_irq = s3c64xx_gpio2int_gpn,
+ .to_irq = samsung_gpiolib_to_irq,
},
}, {
.base = S3C64XX_GPO_BASE,
diff --git a/arch/arm/mach-s3c64xx/include/mach/vmalloc.h b/arch/arm/mach-s3c64xx/include/mach/vmalloc.h
index bc0e9138986..23f75e556a3 100644
--- a/arch/arm/mach-s3c64xx/include/mach/vmalloc.h
+++ b/arch/arm/mach-s3c64xx/include/mach/vmalloc.h
@@ -15,6 +15,6 @@
#ifndef __ASM_ARCH_VMALLOC_H
#define __ASM_ARCH_VMALLOC_H
-#define VMALLOC_END 0xE0000000UL
+#define VMALLOC_END 0xF6000000UL
#endif /* __ASM_ARCH_VMALLOC_H */
diff --git a/arch/arm/mach-s3c64xx/mach-mini6410.c b/arch/arm/mach-s3c64xx/mach-mini6410.c
new file mode 100644
index 00000000000..249c6295647
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/mach-mini6410.c
@@ -0,0 +1,357 @@
+/* linux/arch/arm/mach-s3c64xx/mach-mini6410.c
+ *
+ * Copyright 2010 Darius Augulis <augulis.darius@gmail.com>
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ * http://armlinux.simtec.co.uk/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/fb.h>
+#include <linux/gpio.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/dm9000.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/serial_core.h>
+#include <linux/types.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/map.h>
+#include <mach/regs-fb.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-modem.h>
+#include <mach/regs-srom.h>
+#include <mach/s3c6410.h>
+
+#include <plat/adc.h>
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/fb.h>
+#include <plat/nand.h>
+#include <plat/regs-serial.h>
+#include <plat/ts.h>
+
+#include <video/platform_lcd.h>
+
+#define UCON (S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK)
+#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB)
+#define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE)
+
+static struct s3c2410_uartcfg mini6410_uartcfgs[] __initdata = {
+ [0] = {
+ .hwport = 0,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ },
+ [1] = {
+ .hwport = 1,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ },
+ [2] = {
+ .hwport = 2,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ },
+ [3] = {
+ .hwport = 3,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ },
+};
+
+/* DM9000AEP 10/100 ethernet controller */
+
+static struct resource mini6410_dm9k_resource[] = {
+ [0] = {
+ .start = S3C64XX_PA_XM0CSN1,
+ .end = S3C64XX_PA_XM0CSN1 + 1,
+ .flags = IORESOURCE_MEM
+ },
+ [1] = {
+ .start = S3C64XX_PA_XM0CSN1 + 4,
+ .end = S3C64XX_PA_XM0CSN1 + 5,
+ .flags = IORESOURCE_MEM
+ },
+ [2] = {
+ .start = S3C_EINT(7),
+ .end = S3C_EINT(7),
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL
+ }
+};
+
+static struct dm9000_plat_data mini6410_dm9k_pdata = {
+ .flags = (DM9000_PLATF_16BITONLY | DM9000_PLATF_NO_EEPROM),
+};
+
+static struct platform_device mini6410_device_eth = {
+ .name = "dm9000",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(mini6410_dm9k_resource),
+ .resource = mini6410_dm9k_resource,
+ .dev = {
+ .platform_data = &mini6410_dm9k_pdata,
+ },
+};
+
+static struct mtd_partition mini6410_nand_part[] = {
+ [0] = {
+ .name = "uboot",
+ .size = SZ_1M,
+ .offset = 0,
+ },
+ [1] = {
+ .name = "kernel",
+ .size = SZ_2M,
+ .offset = SZ_1M,
+ },
+ [2] = {
+ .name = "rootfs",
+ .size = MTDPART_SIZ_FULL,
+ .offset = SZ_1M + SZ_2M,
+ },
+};
+
+static struct s3c2410_nand_set mini6410_nand_sets[] = {
+ [0] = {
+ .name = "nand",
+ .nr_chips = 1,
+ .nr_partitions = ARRAY_SIZE(mini6410_nand_part),
+ .partitions = mini6410_nand_part,
+ },
+};
+
+static struct s3c2410_platform_nand mini6410_nand_info = {
+ .tacls = 25,
+ .twrph0 = 55,
+ .twrph1 = 40,
+ .nr_sets = ARRAY_SIZE(mini6410_nand_sets),
+ .sets = mini6410_nand_sets,
+};
+
+static struct s3c_fb_pd_win mini6410_fb_win[] = {
+ {
+ .win_mode = { /* 4.3" 480x272 */
+ .left_margin = 3,
+ .right_margin = 2,
+ .upper_margin = 1,
+ .lower_margin = 1,
+ .hsync_len = 40,
+ .vsync_len = 1,
+ .xres = 480,
+ .yres = 272,
+ },
+ .max_bpp = 32,
+ .default_bpp = 16,
+ }, {
+ .win_mode = { /* 7.0" 800x480 */
+ .left_margin = 8,
+ .right_margin = 13,
+ .upper_margin = 7,
+ .lower_margin = 5,
+ .hsync_len = 3,
+ .vsync_len = 1,
+ .xres = 800,
+ .yres = 480,
+ },
+ .max_bpp = 32,
+ .default_bpp = 16,
+ },
+};
+
+static struct s3c_fb_platdata mini6410_lcd_pdata __initdata = {
+ .setup_gpio = s3c64xx_fb_gpio_setup_24bpp,
+ .win[0] = &mini6410_fb_win[0],
+ .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
+ .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
+};
+
+static void mini6410_lcd_power_set(struct plat_lcd_data *pd,
+ unsigned int power)
+{
+ if (power)
+ gpio_direction_output(S3C64XX_GPE(0), 1);
+ else
+ gpio_direction_output(S3C64XX_GPE(0), 0);
+}
+
+static struct plat_lcd_data mini6410_lcd_power_data = {
+ .set_power = mini6410_lcd_power_set,
+};
+
+static struct platform_device mini6410_lcd_powerdev = {
+ .name = "platform-lcd",
+ .dev.parent = &s3c_device_fb.dev,
+ .dev.platform_data = &mini6410_lcd_power_data,
+};
+
+static struct s3c2410_ts_mach_info s3c_ts_platform __initdata = {
+ .delay = 10000,
+ .presc = 49,
+ .oversampling_shift = 2,
+};
+
+static struct platform_device *mini6410_devices[] __initdata = {
+ &mini6410_device_eth,
+ &s3c_device_hsmmc0,
+ &s3c_device_hsmmc1,
+ &s3c_device_ohci,
+ &s3c_device_nand,
+ &s3c_device_fb,
+ &mini6410_lcd_powerdev,
+ &s3c_device_adc,
+ &s3c_device_ts,
+};
+
+static void __init mini6410_map_io(void)
+{
+ u32 tmp;
+
+ s3c64xx_init_io(NULL, 0);
+ s3c24xx_init_clocks(12000000);
+ s3c24xx_init_uarts(mini6410_uartcfgs, ARRAY_SIZE(mini6410_uartcfgs));
+
+ /* set the LCD type */
+ tmp = __raw_readl(S3C64XX_SPCON);
+ tmp &= ~S3C64XX_SPCON_LCD_SEL_MASK;
+ tmp |= S3C64XX_SPCON_LCD_SEL_RGB;
+ __raw_writel(tmp, S3C64XX_SPCON);
+
+ /* remove the LCD bypass */
+ tmp = __raw_readl(S3C64XX_MODEM_MIFPCON);
+ tmp &= ~MIFPCON_LCD_BYPASS;
+ __raw_writel(tmp, S3C64XX_MODEM_MIFPCON);
+}
+
+/*
+ * mini6410_features string
+ *
+ * 0-9 LCD configuration
+ *
+ */
+static char mini6410_features_str[12] __initdata = "0";
+
+static int __init mini6410_features_setup(char *str)
+{
+ if (str)
+ strlcpy(mini6410_features_str, str,
+ sizeof(mini6410_features_str));
+ return 1;
+}
+
+__setup("mini6410=", mini6410_features_setup);
+
+#define FEATURE_SCREEN (1 << 0)
+
+struct mini6410_features_t {
+ int done;
+ int lcd_index;
+};
+
+static void mini6410_parse_features(
+ struct mini6410_features_t *features,
+ const char *features_str)
+{
+ const char *fp = features_str;
+
+ features->done = 0;
+ features->lcd_index = 0;
+
+ while (*fp) {
+ char f = *fp++;
+
+ switch (f) {
+ case '0'...'9': /* tft screen */
+ if (features->done & FEATURE_SCREEN) {
+ printk(KERN_INFO "MINI6410: '%c' ignored, "
+ "screen type already set\n", f);
+ } else {
+ int li = f - '0';
+ if (li >= ARRAY_SIZE(mini6410_fb_win))
+ printk(KERN_INFO "MINI6410: '%c' out "
+ "of range LCD mode\n", f);
+ else {
+ features->lcd_index = li;
+ }
+ }
+ features->done |= FEATURE_SCREEN;
+ break;
+ }
+ }
+}
+
+static void __init mini6410_machine_init(void)
+{
+ u32 cs1;
+ struct mini6410_features_t features = { 0 };
+
+ printk(KERN_INFO "MINI6410: Option string mini6410=%s\n",
+ mini6410_features_str);
+
+ /* Parse the feature string */
+ mini6410_parse_features(&features, mini6410_features_str);
+
+ mini6410_lcd_pdata.win[0] = &mini6410_fb_win[features.lcd_index];
+
+ printk(KERN_INFO "MINI6410: selected LCD display is %dx%d\n",
+ mini6410_lcd_pdata.win[0]->win_mode.xres,
+ mini6410_lcd_pdata.win[0]->win_mode.yres);
+
+ s3c_nand_set_platdata(&mini6410_nand_info);
+ s3c_fb_set_platdata(&mini6410_lcd_pdata);
+ s3c24xx_ts_set_platdata(&s3c_ts_platform);
+
+ /* configure nCS1 width to 16 bits */
+
+ cs1 = __raw_readl(S3C64XX_SROM_BW) &
+ ~(S3C64XX_SROM_BW__CS_MASK << S3C64XX_SROM_BW__NCS1__SHIFT);
+ cs1 |= ((1 << S3C64XX_SROM_BW__DATAWIDTH__SHIFT) |
+ (1 << S3C64XX_SROM_BW__WAITENABLE__SHIFT) |
+ (1 << S3C64XX_SROM_BW__BYTEENABLE__SHIFT)) <<
+ S3C64XX_SROM_BW__NCS1__SHIFT;
+ __raw_writel(cs1, S3C64XX_SROM_BW);
+
+ /* set timing for nCS1 suitable for ethernet chip */
+
+ __raw_writel((0 << S3C64XX_SROM_BCX__PMC__SHIFT) |
+ (6 << S3C64XX_SROM_BCX__TACP__SHIFT) |
+ (4 << S3C64XX_SROM_BCX__TCAH__SHIFT) |
+ (1 << S3C64XX_SROM_BCX__TCOH__SHIFT) |
+ (13 << S3C64XX_SROM_BCX__TACC__SHIFT) |
+ (4 << S3C64XX_SROM_BCX__TCOS__SHIFT) |
+ (0 << S3C64XX_SROM_BCX__TACS__SHIFT), S3C64XX_SROM_BC1);
+
+ gpio_request(S3C64XX_GPF(15), "LCD power");
+ gpio_request(S3C64XX_GPE(0), "LCD power");
+
+ platform_add_devices(mini6410_devices, ARRAY_SIZE(mini6410_devices));
+}
+
+MACHINE_START(MINI6410, "MINI6410")
+ /* Maintainer: Darius Augulis <augulis.darius@gmail.com> */
+ .boot_params = S3C64XX_PA_SDRAM + 0x100,
+ .init_irq = s3c6410_init_irq,
+ .map_io = mini6410_map_io,
+ .init_machine = mini6410_machine_init,
+ .timer = &s3c24xx_timer,
+MACHINE_END
diff --git a/arch/arm/mach-s3c64xx/mach-real6410.c b/arch/arm/mach-s3c64xx/mach-real6410.c
index 4b4475da8ec..f9ef9b5c5f5 100644
--- a/arch/arm/mach-s3c64xx/mach-real6410.c
+++ b/arch/arm/mach-s3c64xx/mach-real6410.c
@@ -12,23 +12,39 @@
*
*/
-#include <linux/kernel.h>
-#include <linux/types.h>
+#include <linux/init.h>
#include <linux/interrupt.h>
+#include <linux/fb.h>
+#include <linux/gpio.h>
+#include <linux/kernel.h>
#include <linux/list.h>
-#include <linux/init.h>
#include <linux/dm9000.h>
-#include <linux/serial_core.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
#include <linux/platform_device.h>
+#include <linux/serial_core.h>
+#include <linux/types.h>
+
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
+
#include <mach/map.h>
-#include <mach/s3c6410.h>
+#include <mach/regs-fb.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-modem.h>
#include <mach/regs-srom.h>
+#include <mach/s3c6410.h>
+
+#include <plat/adc.h>
#include <plat/cpu.h>
#include <plat/devs.h>
+#include <plat/fb.h>
+#include <plat/nand.h>
#include <plat/regs-serial.h>
+#include <plat/ts.h>
+
+#include <video/platform_lcd.h>
#define UCON (S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK)
#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB)
@@ -99,22 +115,192 @@ static struct platform_device real6410_device_eth = {
},
};
+static struct s3c_fb_pd_win real6410_fb_win[] = {
+ {
+ .win_mode = { /* 4.3" 480x272 */
+ .left_margin = 3,
+ .right_margin = 2,
+ .upper_margin = 1,
+ .lower_margin = 1,
+ .hsync_len = 40,
+ .vsync_len = 1,
+ .xres = 480,
+ .yres = 272,
+ },
+ .max_bpp = 32,
+ .default_bpp = 16,
+ }, {
+ .win_mode = { /* 7.0" 800x480 */
+ .left_margin = 8,
+ .right_margin = 13,
+ .upper_margin = 7,
+ .lower_margin = 5,
+ .hsync_len = 3,
+ .vsync_len = 1,
+ .xres = 800,
+ .yres = 480,
+ },
+ .max_bpp = 32,
+ .default_bpp = 16,
+ },
+};
+
+static struct s3c_fb_platdata real6410_lcd_pdata __initdata = {
+ .setup_gpio = s3c64xx_fb_gpio_setup_24bpp,
+ .win[0] = &real6410_fb_win[0],
+ .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
+ .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
+};
+
+static struct mtd_partition real6410_nand_part[] = {
+ [0] = {
+ .name = "uboot",
+ .size = SZ_1M,
+ .offset = 0,
+ },
+ [1] = {
+ .name = "kernel",
+ .size = SZ_2M,
+ .offset = SZ_1M,
+ },
+ [2] = {
+ .name = "rootfs",
+ .size = MTDPART_SIZ_FULL,
+ .offset = SZ_1M + SZ_2M,
+ },
+};
+
+static struct s3c2410_nand_set real6410_nand_sets[] = {
+ [0] = {
+ .name = "nand",
+ .nr_chips = 1,
+ .nr_partitions = ARRAY_SIZE(real6410_nand_part),
+ .partitions = real6410_nand_part,
+ },
+};
+
+static struct s3c2410_platform_nand real6410_nand_info = {
+ .tacls = 25,
+ .twrph0 = 55,
+ .twrph1 = 40,
+ .nr_sets = ARRAY_SIZE(real6410_nand_sets),
+ .sets = real6410_nand_sets,
+};
+
static struct platform_device *real6410_devices[] __initdata = {
&real6410_device_eth,
&s3c_device_hsmmc0,
&s3c_device_hsmmc1,
+ &s3c_device_fb,
+ &s3c_device_nand,
+ &s3c_device_adc,
+ &s3c_device_ts,
+ &s3c_device_ohci,
+};
+
+static struct s3c2410_ts_mach_info s3c_ts_platform __initdata = {
+ .delay = 10000,
+ .presc = 49,
+ .oversampling_shift = 2,
};
static void __init real6410_map_io(void)
{
+ u32 tmp;
+
s3c64xx_init_io(NULL, 0);
s3c24xx_init_clocks(12000000);
s3c24xx_init_uarts(real6410_uartcfgs, ARRAY_SIZE(real6410_uartcfgs));
+
+ /* set the LCD type */
+ tmp = __raw_readl(S3C64XX_SPCON);
+ tmp &= ~S3C64XX_SPCON_LCD_SEL_MASK;
+ tmp |= S3C64XX_SPCON_LCD_SEL_RGB;
+ __raw_writel(tmp, S3C64XX_SPCON);
+
+ /* remove the LCD bypass */
+ tmp = __raw_readl(S3C64XX_MODEM_MIFPCON);
+ tmp &= ~MIFPCON_LCD_BYPASS;
+ __raw_writel(tmp, S3C64XX_MODEM_MIFPCON);
+}
+
+/*
+ * real6410_features string
+ *
+ * 0-9 LCD configuration
+ *
+ */
+static char real6410_features_str[12] __initdata = "0";
+
+static int __init real6410_features_setup(char *str)
+{
+ if (str)
+ strlcpy(real6410_features_str, str,
+ sizeof(real6410_features_str));
+ return 1;
+}
+
+__setup("real6410=", real6410_features_setup);
+
+#define FEATURE_SCREEN (1 << 0)
+
+struct real6410_features_t {
+ int done;
+ int lcd_index;
+};
+
+static void real6410_parse_features(
+ struct real6410_features_t *features,
+ const char *features_str)
+{
+ const char *fp = features_str;
+
+ features->done = 0;
+ features->lcd_index = 0;
+
+ while (*fp) {
+ char f = *fp++;
+
+ switch (f) {
+ case '0'...'9': /* tft screen */
+ if (features->done & FEATURE_SCREEN) {
+ printk(KERN_INFO "REAL6410: '%c' ignored, "
+ "screen type already set\n", f);
+ } else {
+ int li = f - '0';
+ if (li >= ARRAY_SIZE(real6410_fb_win))
+ printk(KERN_INFO "REAL6410: '%c' out "
+ "of range LCD mode\n", f);
+ else {
+ features->lcd_index = li;
+ }
+ }
+ features->done |= FEATURE_SCREEN;
+ break;
+ }
+ }
}
static void __init real6410_machine_init(void)
{
u32 cs1;
+ struct real6410_features_t features = { 0 };
+
+ printk(KERN_INFO "REAL6410: Option string real6410=%s\n",
+ real6410_features_str);
+
+ /* Parse the feature string */
+ real6410_parse_features(&features, real6410_features_str);
+
+ real6410_lcd_pdata.win[0] = &real6410_fb_win[features.lcd_index];
+
+ printk(KERN_INFO "REAL6410: selected LCD display is %dx%d\n",
+ real6410_lcd_pdata.win[0]->win_mode.xres,
+ real6410_lcd_pdata.win[0]->win_mode.yres);
+
+ s3c_fb_set_platdata(&real6410_lcd_pdata);
+ s3c_nand_set_platdata(&real6410_nand_info);
+ s3c24xx_ts_set_platdata(&s3c_ts_platform);
/* configure nCS1 width to 16 bits */
@@ -136,6 +322,8 @@ static void __init real6410_machine_init(void)
(4 << S3C64XX_SROM_BCX__TCOS__SHIFT) |
(0 << S3C64XX_SROM_BCX__TACS__SHIFT), S3C64XX_SROM_BC1);
+ gpio_request(S3C64XX_GPF(15), "LCD power");
+
platform_add_devices(real6410_devices, ARRAY_SIZE(real6410_devices));
}
diff --git a/arch/arm/mach-s3c64xx/setup-fb-24bpp.c b/arch/arm/mach-s3c64xx/setup-fb-24bpp.c
index 000736877df..8f3091182f9 100644
--- a/arch/arm/mach-s3c64xx/setup-fb-24bpp.c
+++ b/arch/arm/mach-s3c64xx/setup-fb-24bpp.c
@@ -23,15 +23,6 @@
extern void s3c64xx_fb_gpio_setup_24bpp(void)
{
- unsigned int gpio;
-
- for (gpio = S3C64XX_GPI(0); gpio <= S3C64XX_GPI(15); gpio++) {
- s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
- s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
- }
-
- for (gpio = S3C64XX_GPJ(0); gpio <= S3C64XX_GPJ(11); gpio++) {
- s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
- s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
- }
+ s3c_gpio_cfgrange_nopull(S3C64XX_GPI(0), 16, S3C_GPIO_SFN(2));
+ s3c_gpio_cfgrange_nopull(S3C64XX_GPJ(0), 12, S3C_GPIO_SFN(2));
}
diff --git a/arch/arm/mach-s3c64xx/setup-ide.c b/arch/arm/mach-s3c64xx/setup-ide.c
index c12c315f33b..41b425602d8 100644
--- a/arch/arm/mach-s3c64xx/setup-ide.c
+++ b/arch/arm/mach-s3c64xx/setup-ide.c
@@ -17,11 +17,11 @@
#include <mach/map.h>
#include <mach/regs-clock.h>
#include <plat/gpio-cfg.h>
+#include <plat/ata.h>
void s3c64xx_ide_setup_gpio(void)
{
u32 reg;
- u32 gpio = 0;
reg = readl(S3C_MEM_SYS_CFG) & (~0x3f);
@@ -32,15 +32,12 @@ void s3c64xx_ide_setup_gpio(void)
s3c_gpio_cfgpin(S3C64XX_GPB(4), S3C_GPIO_SFN(4));
/* Set XhiDATA[15:0] pins as CF Data[15:0] */
- for (gpio = S3C64XX_GPK(0); gpio <= S3C64XX_GPK(15); gpio++)
- s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(5));
+ s3c_gpio_cfgpin_range(S3C64XX_GPK(0), 16, S3C_GPIO_SFN(5));
/* Set XhiADDR[2:0] pins as CF ADDR[2:0] */
- for (gpio = S3C64XX_GPL(0); gpio <= S3C64XX_GPL(2); gpio++)
- s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(6));
+ s3c_gpio_cfgpin_range(S3C64XX_GPL(0), 3, S3C_GPIO_SFN(6));
/* Set Xhi ctrl pins as CF ctrl pins(IORDY, IOWR, IORD, CE[0:1]) */
s3c_gpio_cfgpin(S3C64XX_GPM(5), S3C_GPIO_SFN(1));
- for (gpio = S3C64XX_GPM(0); gpio <= S3C64XX_GPM(4); gpio++)
- s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(6));
+ s3c_gpio_cfgpin_range(S3C64XX_GPM(0), 5, S3C_GPIO_SFN(6));
}
diff --git a/arch/arm/mach-s3c64xx/setup-keypad.c b/arch/arm/mach-s3c64xx/setup-keypad.c
index abc34e4e1a9..f8ed0d22db7 100644
--- a/arch/arm/mach-s3c64xx/setup-keypad.c
+++ b/arch/arm/mach-s3c64xx/setup-keypad.c
@@ -12,23 +12,13 @@
#include <linux/gpio.h>
#include <plat/gpio-cfg.h>
+#include <plat/keypad.h>
void samsung_keypad_cfg_gpio(unsigned int rows, unsigned int cols)
{
- unsigned int gpio;
- unsigned int end;
-
/* Set all the necessary GPK pins to special-function 3: KP_ROW[x] */
- end = S3C64XX_GPK(8 + rows);
- for (gpio = S3C64XX_GPK(8); gpio < end; gpio++) {
- s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(3));
- s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
- }
+ s3c_gpio_cfgrange_nopull(S3C64XX_GPK(8), 8 + rows, S3C_GPIO_SFN(3));
/* Set all the necessary GPL pins to special-function 3: KP_COL[x] */
- end = S3C64XX_GPL(0 + cols);
- for (gpio = S3C64XX_GPL(0); gpio < end; gpio++) {
- s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(3));
- s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
- }
+ s3c_gpio_cfgrange_nopull(S3C64XX_GPL(0), cols, S3C_GPIO_SFN(3));
}
diff --git a/arch/arm/mach-s3c64xx/setup-sdhci-gpio.c b/arch/arm/mach-s3c64xx/setup-sdhci-gpio.c
index 32235959137..6eac071afae 100644
--- a/arch/arm/mach-s3c64xx/setup-sdhci-gpio.c
+++ b/arch/arm/mach-s3c64xx/setup-sdhci-gpio.c
@@ -24,16 +24,9 @@
void s3c64xx_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width)
{
struct s3c_sdhci_platdata *pdata = dev->dev.platform_data;
- unsigned int gpio;
- unsigned int end;
- end = S3C64XX_GPG(2 + width);
-
- /* Set all the necessary GPG pins to special-function 0 */
- for (gpio = S3C64XX_GPG(0); gpio < end; gpio++) {
- s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
- s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
- }
+ /* Set all the necessary GPG pins to special-function 2 */
+ s3c_gpio_cfgrange_nopull(S3C64XX_GPG(0), 2 + width, S3C_GPIO_SFN(2));
if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) {
s3c_gpio_setpull(S3C64XX_GPG(6), S3C_GPIO_PULL_UP);
@@ -44,16 +37,9 @@ void s3c64xx_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width)
void s3c64xx_setup_sdhci1_cfg_gpio(struct platform_device *dev, int width)
{
struct s3c_sdhci_platdata *pdata = dev->dev.platform_data;
- unsigned int gpio;
- unsigned int end;
- end = S3C64XX_GPH(2 + width);
-
- /* Set all the necessary GPG pins to special-function 0 */
- for (gpio = S3C64XX_GPH(0); gpio < end; gpio++) {
- s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
- s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
- }
+ /* Set all the necessary GPH pins to special-function 2 */
+ s3c_gpio_cfgrange_nopull(S3C64XX_GPH(0), 2 + width, S3C_GPIO_SFN(2));
if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) {
s3c_gpio_setpull(S3C64XX_GPG(6), S3C_GPIO_PULL_UP);
@@ -63,20 +49,9 @@ void s3c64xx_setup_sdhci1_cfg_gpio(struct platform_device *dev, int width)
void s3c64xx_setup_sdhci2_cfg_gpio(struct platform_device *dev, int width)
{
- unsigned int gpio;
- unsigned int end;
+ /* Set all the necessary GPH pins to special-function 3 */
+ s3c_gpio_cfgrange_nopull(S3C64XX_GPH(6), width, S3C_GPIO_SFN(3));
- end = S3C64XX_GPH(6 + width);
-
- /* Set all the necessary GPH pins to special-function 1 */
- for (gpio = S3C64XX_GPH(6); gpio < end; gpio++) {
- s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(3));
- s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
- }
-
- /* Set all the necessary GPC pins to special-function 1 */
- for (gpio = S3C64XX_GPC(4); gpio < S3C64XX_GPC(6); gpio++) {
- s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(3));
- s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
- }
+ /* Set all the necessary GPC pins to special-function 3 */
+ s3c_gpio_cfgrange_nopull(S3C64XX_GPC(4), 2, S3C_GPIO_SFN(3));
}
diff --git a/arch/arm/mach-s5p6442/Kconfig b/arch/arm/mach-s5p6442/Kconfig
index 0fda0a5df96..33569e4007c 100644
--- a/arch/arm/mach-s5p6442/Kconfig
+++ b/arch/arm/mach-s5p6442/Kconfig
@@ -11,7 +11,6 @@ if ARCH_S5P6442
config CPU_S5P6442
bool
- select PLAT_S5P
select S3C_PL330_DMA
help
Enable S5P6442 CPU support
diff --git a/arch/arm/mach-s5p6442/clock.c b/arch/arm/mach-s5p6442/clock.c
index dcd20f17212..16d6e7e61b5 100644
--- a/arch/arm/mach-s5p6442/clock.c
+++ b/arch/arm/mach-s5p6442/clock.c
@@ -192,6 +192,11 @@ static struct clk clk_pclkd1 = {
.parent = &clk_hclkd1,
};
+int s5p6442_clk_ip0_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(S5P_CLKGATE_IP0, clk, enable);
+}
+
int s5p6442_clk_ip3_ctrl(struct clk *clk, int enable)
{
return s5p_gatectrl(S5P_CLKGATE_IP3, clk, enable);
@@ -335,6 +340,16 @@ void __init_or_cpufreq s5p6442_setup_clocks(void)
clk_pclkd1.rate = pclkd1;
}
+static struct clk init_clocks_disable[] = {
+ {
+ .name = "pdma",
+ .id = -1,
+ .parent = &clk_pclkd1,
+ .enable = s5p6442_clk_ip0_ctrl,
+ .ctrlbit = (1 << 3),
+ },
+};
+
static struct clk init_clocks[] = {
{
.name = "systimer",
@@ -393,10 +408,23 @@ static struct clk *clks[] __initdata = {
void __init s5p6442_register_clocks(void)
{
+ struct clk *clkptr;
+ int i, ret;
+
s3c24xx_register_clocks(clks, ARRAY_SIZE(clks));
s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs));
s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks));
+ clkptr = init_clocks_disable;
+ for (i = 0; i < ARRAY_SIZE(init_clocks_disable); i++, clkptr++) {
+ ret = s3c24xx_register_clock(clkptr);
+ if (ret < 0) {
+ printk(KERN_ERR "Fail to register clock %s (%d)\n",
+ clkptr->name, ret);
+ } else
+ (clkptr->enable)(clkptr, 0);
+ }
+
s3c_pwmclk_init();
}
diff --git a/arch/arm/mach-s5p6442/dev-audio.c b/arch/arm/mach-s5p6442/dev-audio.c
index 7a4e34720b7..3462197ff35 100644
--- a/arch/arm/mach-s5p6442/dev-audio.c
+++ b/arch/arm/mach-s5p6442/dev-audio.c
@@ -21,22 +21,16 @@
static int s5p6442_cfg_i2s(struct platform_device *pdev)
{
+ unsigned int base;
+
/* configure GPIO for i2s port */
switch (pdev->id) {
case 1:
- s3c_gpio_cfgpin(S5P6442_GPC1(0), S3C_GPIO_SFN(2));
- s3c_gpio_cfgpin(S5P6442_GPC1(1), S3C_GPIO_SFN(2));
- s3c_gpio_cfgpin(S5P6442_GPC1(2), S3C_GPIO_SFN(2));
- s3c_gpio_cfgpin(S5P6442_GPC1(3), S3C_GPIO_SFN(2));
- s3c_gpio_cfgpin(S5P6442_GPC1(4), S3C_GPIO_SFN(2));
+ base = S5P6442_GPC1(0);
break;
case -1:
- s3c_gpio_cfgpin(S5P6442_GPC0(0), S3C_GPIO_SFN(2));
- s3c_gpio_cfgpin(S5P6442_GPC0(1), S3C_GPIO_SFN(2));
- s3c_gpio_cfgpin(S5P6442_GPC0(2), S3C_GPIO_SFN(2));
- s3c_gpio_cfgpin(S5P6442_GPC0(3), S3C_GPIO_SFN(2));
- s3c_gpio_cfgpin(S5P6442_GPC0(4), S3C_GPIO_SFN(2));
+ base = S5P6442_GPC0(0);
break;
default:
@@ -44,6 +38,7 @@ static int s5p6442_cfg_i2s(struct platform_device *pdev)
return -EINVAL;
}
+ s3c_gpio_cfgpin_range(base, 5, S3C_GPIO_SFN(2));
return 0;
}
@@ -111,21 +106,15 @@ struct platform_device s5p6442_device_iis1 = {
static int s5p6442_pcm_cfg_gpio(struct platform_device *pdev)
{
+ unsigned int base;
+
switch (pdev->id) {
case 0:
- s3c_gpio_cfgpin(S5P6442_GPC0(0), S3C_GPIO_SFN(3));
- s3c_gpio_cfgpin(S5P6442_GPC0(1), S3C_GPIO_SFN(3));
- s3c_gpio_cfgpin(S5P6442_GPC0(2), S3C_GPIO_SFN(3));
- s3c_gpio_cfgpin(S5P6442_GPC0(3), S3C_GPIO_SFN(3));
- s3c_gpio_cfgpin(S5P6442_GPC0(4), S3C_GPIO_SFN(3));
+ base = S5P6442_GPC0(0);
break;
case 1:
- s3c_gpio_cfgpin(S5P6442_GPC1(0), S3C_GPIO_SFN(3));
- s3c_gpio_cfgpin(S5P6442_GPC1(1), S3C_GPIO_SFN(3));
- s3c_gpio_cfgpin(S5P6442_GPC1(2), S3C_GPIO_SFN(3));
- s3c_gpio_cfgpin(S5P6442_GPC1(3), S3C_GPIO_SFN(3));
- s3c_gpio_cfgpin(S5P6442_GPC1(4), S3C_GPIO_SFN(3));
+ base = S5P6442_GPC1(0);
break;
default:
@@ -133,6 +122,7 @@ static int s5p6442_pcm_cfg_gpio(struct platform_device *pdev)
return -EINVAL;
}
+ s3c_gpio_cfgpin_range(base, 5, S3C_GPIO_SFN(3));
return 0;
}
diff --git a/arch/arm/mach-s5p6442/dev-spi.c b/arch/arm/mach-s5p6442/dev-spi.c
index e894651a88b..cce8c247070 100644
--- a/arch/arm/mach-s5p6442/dev-spi.c
+++ b/arch/arm/mach-s5p6442/dev-spi.c
@@ -38,11 +38,9 @@ static int s5p6442_spi_cfg_gpio(struct platform_device *pdev)
switch (pdev->id) {
case 0:
s3c_gpio_cfgpin(S5P6442_GPB(0), S3C_GPIO_SFN(2));
- s3c_gpio_cfgpin(S5P6442_GPB(2), S3C_GPIO_SFN(2));
- s3c_gpio_cfgpin(S5P6442_GPB(3), S3C_GPIO_SFN(2));
s3c_gpio_setpull(S5P6442_GPB(0), S3C_GPIO_PULL_UP);
- s3c_gpio_setpull(S5P6442_GPB(2), S3C_GPIO_PULL_UP);
- s3c_gpio_setpull(S5P6442_GPB(3), S3C_GPIO_PULL_UP);
+ s3c_gpio_cfgall_range(S5P6442_GPB(2), 2,
+ S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
break;
default:
diff --git a/arch/arm/mach-s5p6442/dma.c b/arch/arm/mach-s5p6442/dma.c
index ad4f8704b93..7dfb13654f8 100644
--- a/arch/arm/mach-s5p6442/dma.c
+++ b/arch/arm/mach-s5p6442/dma.c
@@ -82,7 +82,7 @@ static struct s3c_pl330_platdata s5p6442_pdma_pdata = {
static struct platform_device s5p6442_device_pdma = {
.name = "s3c-pl330",
- .id = 1,
+ .id = -1,
.num_resources = ARRAY_SIZE(s5p6442_pdma_resource),
.resource = s5p6442_pdma_resource,
.dev = {
diff --git a/arch/arm/mach-s5p6442/include/mach/regs-clock.h b/arch/arm/mach-s5p6442/include/mach/regs-clock.h
index d8360b5d4ec..00828a33699 100644
--- a/arch/arm/mach-s5p6442/include/mach/regs-clock.h
+++ b/arch/arm/mach-s5p6442/include/mach/regs-clock.h
@@ -46,6 +46,7 @@
#define S5P_CLK_DIV5 S5P_CLKREG(0x314)
#define S5P_CLK_DIV6 S5P_CLKREG(0x318)
+#define S5P_CLKGATE_IP0 S5P_CLKREG(0x460)
#define S5P_CLKGATE_IP3 S5P_CLKREG(0x46C)
/* CLK_OUT */
diff --git a/arch/arm/mach-s5p6442/include/mach/vmalloc.h b/arch/arm/mach-s5p6442/include/mach/vmalloc.h
index f5c83f02c18..4aa55e55ac4 100644
--- a/arch/arm/mach-s5p6442/include/mach/vmalloc.h
+++ b/arch/arm/mach-s5p6442/include/mach/vmalloc.h
@@ -12,6 +12,6 @@
#ifndef __ASM_ARCH_VMALLOC_H
#define __ASM_ARCH_VMALLOC_H
-#define VMALLOC_END 0xE0000000UL
+#define VMALLOC_END 0xF6000000UL
#endif /* __ASM_ARCH_VMALLOC_H */
diff --git a/arch/arm/mach-s5p64x0/Kconfig b/arch/arm/mach-s5p64x0/Kconfig
index fbcae935202..164d2783d38 100644
--- a/arch/arm/mach-s5p64x0/Kconfig
+++ b/arch/arm/mach-s5p64x0/Kconfig
@@ -9,14 +9,12 @@ if ARCH_S5P64X0
config CPU_S5P6440
bool
- select PLAT_S5P
select S3C_PL330_DMA
help
Enable S5P6440 CPU support
config CPU_S5P6450
bool
- select PLAT_S5P
select S3C_PL330_DMA
help
Enable S5P6450 CPU support
diff --git a/arch/arm/mach-s5p64x0/clock-s5p6440.c b/arch/arm/mach-s5p64x0/clock-s5p6440.c
index f93dcd8b4d6..e4883dc1c8d 100644
--- a/arch/arm/mach-s5p64x0/clock-s5p6440.c
+++ b/arch/arm/mach-s5p64x0/clock-s5p6440.c
@@ -79,13 +79,16 @@ static int s5p6440_epll_set_rate(struct clk *clk, unsigned long rate)
__raw_writel(epll_con, S5P64X0_EPLL_CON);
__raw_writel(epll_con_k, S5P64X0_EPLL_CON_K);
+ printk(KERN_WARNING "EPLL Rate changes from %lu to %lu\n",
+ clk->rate, rate);
+
clk->rate = rate;
return 0;
}
static struct clk_ops s5p6440_epll_ops = {
- .get_rate = s5p64x0_epll_get_rate,
+ .get_rate = s5p_epll_get_rate,
.set_rate = s5p6440_epll_set_rate,
};
@@ -150,6 +153,12 @@ static struct clk init_clocks_disable[] = {
.enable = s5p64x0_hclk0_ctrl,
.ctrlbit = (1 << 8),
}, {
+ .name = "pdma",
+ .id = -1,
+ .parent = &clk_hclk_low.clk,
+ .enable = s5p64x0_hclk0_ctrl,
+ .ctrlbit = (1 << 12),
+ }, {
.name = "hsmmc",
.id = 0,
.parent = &clk_hclk_low.clk,
@@ -331,12 +340,6 @@ static struct clk init_clocks[] = {
.enable = s5p64x0_hclk0_ctrl,
.ctrlbit = (1 << 21),
}, {
- .name = "dma",
- .id = -1,
- .parent = &clk_hclk_low.clk,
- .enable = s5p64x0_hclk0_ctrl,
- .ctrlbit = (1 << 12),
- }, {
.name = "uart",
.id = 0,
.parent = &clk_pclk_low.clk,
@@ -548,7 +551,7 @@ void __init_or_cpufreq s5p6440_setup_clocks(void)
/* Set S5P6440 functions for clk_fout_epll */
- clk_fout_epll.enable = s5p64x0_epll_enable;
+ clk_fout_epll.enable = s5p_epll_enable;
clk_fout_epll.ops = &s5p6440_epll_ops;
clk_48m.enable = s5p64x0_clk48m_ctrl;
diff --git a/arch/arm/mach-s5p64x0/clock-s5p6450.c b/arch/arm/mach-s5p64x0/clock-s5p6450.c
index f9afb05b217..7dbf3c968f5 100644
--- a/arch/arm/mach-s5p64x0/clock-s5p6450.c
+++ b/arch/arm/mach-s5p64x0/clock-s5p6450.c
@@ -80,13 +80,16 @@ static int s5p6450_epll_set_rate(struct clk *clk, unsigned long rate)
__raw_writel(epll_con, S5P64X0_EPLL_CON);
__raw_writel(epll_con_k, S5P64X0_EPLL_CON_K);
+ printk(KERN_WARNING "EPLL Rate changes from %lu to %lu\n",
+ clk->rate, rate);
+
clk->rate = rate;
return 0;
}
static struct clk_ops s5p6450_epll_ops = {
- .get_rate = s5p64x0_epll_get_rate,
+ .get_rate = s5p_epll_get_rate,
.set_rate = s5p6450_epll_set_rate,
};
@@ -186,6 +189,12 @@ static struct clk init_clocks_disable[] = {
.enable = s5p64x0_hclk0_ctrl,
.ctrlbit = (1 << 3),
}, {
+ .name = "pdma",
+ .id = -1,
+ .parent = &clk_hclk_low.clk,
+ .enable = s5p64x0_hclk0_ctrl,
+ .ctrlbit = (1 << 12),
+ }, {
.name = "hsmmc",
.id = 0,
.parent = &clk_hclk_low.clk,
@@ -283,12 +292,6 @@ static struct clk init_clocks[] = {
.enable = s5p64x0_hclk0_ctrl,
.ctrlbit = (1 << 21),
}, {
- .name = "dma",
- .id = -1,
- .parent = &clk_hclk_low.clk,
- .enable = s5p64x0_hclk0_ctrl,
- .ctrlbit = (1 << 12),
- }, {
.name = "uart",
.id = 0,
.parent = &clk_pclk_low.clk,
@@ -581,7 +584,7 @@ void __init_or_cpufreq s5p6450_setup_clocks(void)
/* Set S5P6450 functions for clk_fout_epll */
- clk_fout_epll.enable = s5p64x0_epll_enable;
+ clk_fout_epll.enable = s5p_epll_enable;
clk_fout_epll.ops = &s5p6450_epll_ops;
clk_48m.enable = s5p64x0_clk48m_ctrl;
diff --git a/arch/arm/mach-s5p64x0/clock.c b/arch/arm/mach-s5p64x0/clock.c
index 523ba8039ac..b52c6e2f37a 100644
--- a/arch/arm/mach-s5p64x0/clock.c
+++ b/arch/arm/mach-s5p64x0/clock.c
@@ -73,24 +73,6 @@ static const u32 clock_table[][3] = {
{L2 * 1000, (3 << ARM_DIV_RATIO_SHIFT), (0 << S5P64X0_CLKDIV0_HCLK_SHIFT)},
};
-int s5p64x0_epll_enable(struct clk *clk, int enable)
-{
- unsigned int ctrlbit = clk->ctrlbit;
- unsigned int epll_con = __raw_readl(S5P64X0_EPLL_CON) & ~ctrlbit;
-
- if (enable)
- __raw_writel(epll_con | ctrlbit, S5P64X0_EPLL_CON);
- else
- __raw_writel(epll_con, S5P64X0_EPLL_CON);
-
- return 0;
-}
-
-unsigned long s5p64x0_epll_get_rate(struct clk *clk)
-{
- return clk->rate;
-}
-
unsigned long s5p64x0_armclk_get_rate(struct clk *clk)
{
unsigned long rate = clk_get_rate(clk->parent);
diff --git a/arch/arm/mach-s5p64x0/dev-audio.c b/arch/arm/mach-s5p64x0/dev-audio.c
index fa097bd68ca..396bacc0a39 100644
--- a/arch/arm/mach-s5p64x0/dev-audio.c
+++ b/arch/arm/mach-s5p64x0/dev-audio.c
@@ -24,13 +24,8 @@ static int s5p6440_cfg_i2s(struct platform_device *pdev)
/* configure GPIO for i2s port */
switch (pdev->id) {
case -1:
- s3c_gpio_cfgpin(S5P6440_GPR(4), S3C_GPIO_SFN(5));
- s3c_gpio_cfgpin(S5P6440_GPR(5), S3C_GPIO_SFN(5));
- s3c_gpio_cfgpin(S5P6440_GPR(6), S3C_GPIO_SFN(5));
- s3c_gpio_cfgpin(S5P6440_GPR(7), S3C_GPIO_SFN(5));
- s3c_gpio_cfgpin(S5P6440_GPR(8), S3C_GPIO_SFN(5));
- s3c_gpio_cfgpin(S5P6440_GPR(13), S3C_GPIO_SFN(5));
- s3c_gpio_cfgpin(S5P6440_GPR(14), S3C_GPIO_SFN(5));
+ s3c_gpio_cfgpin_range(S5P6440_GPR(4), 5, S3C_GPIO_SFN(5));
+ s3c_gpio_cfgpin_range(S5P6440_GPR(13), 2, S3C_GPIO_SFN(5));
break;
default:
@@ -47,13 +42,9 @@ static int s5p6450_cfg_i2s(struct platform_device *pdev)
switch (pdev->id) {
case -1:
s3c_gpio_cfgpin(S5P6450_GPB(4), S3C_GPIO_SFN(5));
- s3c_gpio_cfgpin(S5P6450_GPR(4), S3C_GPIO_SFN(5));
- s3c_gpio_cfgpin(S5P6450_GPR(5), S3C_GPIO_SFN(5));
- s3c_gpio_cfgpin(S5P6450_GPR(6), S3C_GPIO_SFN(5));
- s3c_gpio_cfgpin(S5P6450_GPR(7), S3C_GPIO_SFN(5));
- s3c_gpio_cfgpin(S5P6450_GPR(8), S3C_GPIO_SFN(5));
- s3c_gpio_cfgpin(S5P6450_GPR(13), S3C_GPIO_SFN(5));
- s3c_gpio_cfgpin(S5P6450_GPR(14), S3C_GPIO_SFN(5));
+ s3c_gpio_cfgpin_range(S5P6450_GPR(4), 5, S3C_GPIO_SFN(5));
+ s3c_gpio_cfgpin_range(S5P6450_GPR(13), 2, S3C_GPIO_SFN(5));
+
break;
default:
@@ -116,11 +107,8 @@ static int s5p6440_pcm_cfg_gpio(struct platform_device *pdev)
{
switch (pdev->id) {
case 0:
- s3c_gpio_cfgpin(S5P6440_GPR(7), S3C_GPIO_SFN(2));
- s3c_gpio_cfgpin(S5P6440_GPR(13), S3C_GPIO_SFN(2));
- s3c_gpio_cfgpin(S5P6440_GPR(14), S3C_GPIO_SFN(2));
- s3c_gpio_cfgpin(S5P6440_GPR(8), S3C_GPIO_SFN(2));
- s3c_gpio_cfgpin(S5P6440_GPR(6), S3C_GPIO_SFN(2));
+ s3c_gpio_cfgpin_range(S5P6440_GPR(6), 3, S3C_GPIO_SFN(2));
+ s3c_gpio_cfgpin_range(S5P6440_GPR(13), 2, S3C_GPIO_SFN(2));
break;
default:
diff --git a/arch/arm/mach-s5p64x0/dev-spi.c b/arch/arm/mach-s5p64x0/dev-spi.c
index 5b69ec4c8af..e78ee18c76e 100644
--- a/arch/arm/mach-s5p64x0/dev-spi.c
+++ b/arch/arm/mach-s5p64x0/dev-spi.c
@@ -39,23 +39,15 @@ static char *s5p64x0_spi_src_clks[] = {
*/
static int s5p6440_spi_cfg_gpio(struct platform_device *pdev)
{
+ unsigned int base;
+
switch (pdev->id) {
case 0:
- s3c_gpio_cfgpin(S5P6440_GPC(0), S3C_GPIO_SFN(2));
- s3c_gpio_cfgpin(S5P6440_GPC(1), S3C_GPIO_SFN(2));
- s3c_gpio_cfgpin(S5P6440_GPC(2), S3C_GPIO_SFN(2));
- s3c_gpio_setpull(S5P6440_GPC(0), S3C_GPIO_PULL_UP);
- s3c_gpio_setpull(S5P6440_GPC(1), S3C_GPIO_PULL_UP);
- s3c_gpio_setpull(S5P6440_GPC(2), S3C_GPIO_PULL_UP);
+ base = S5P6440_GPC(0);
break;
case 1:
- s3c_gpio_cfgpin(S5P6440_GPC(4), S3C_GPIO_SFN(2));
- s3c_gpio_cfgpin(S5P6440_GPC(5), S3C_GPIO_SFN(2));
- s3c_gpio_cfgpin(S5P6440_GPC(6), S3C_GPIO_SFN(2));
- s3c_gpio_setpull(S5P6440_GPC(4), S3C_GPIO_PULL_UP);
- s3c_gpio_setpull(S5P6440_GPC(5), S3C_GPIO_PULL_UP);
- s3c_gpio_setpull(S5P6440_GPC(6), S3C_GPIO_PULL_UP);
+ base = S5P6440_GPC(4);
break;
default:
@@ -63,28 +55,23 @@ static int s5p6440_spi_cfg_gpio(struct platform_device *pdev)
return -EINVAL;
}
+ s3c_gpio_cfgall_range(base, 3,
+ S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
+
return 0;
}
static int s5p6450_spi_cfg_gpio(struct platform_device *pdev)
{
+ unsigned int base;
+
switch (pdev->id) {
case 0:
- s3c_gpio_cfgpin(S5P6450_GPC(0), S3C_GPIO_SFN(2));
- s3c_gpio_cfgpin(S5P6450_GPC(1), S3C_GPIO_SFN(2));
- s3c_gpio_cfgpin(S5P6450_GPC(2), S3C_GPIO_SFN(2));
- s3c_gpio_setpull(S5P6450_GPC(0), S3C_GPIO_PULL_UP);
- s3c_gpio_setpull(S5P6450_GPC(1), S3C_GPIO_PULL_UP);
- s3c_gpio_setpull(S5P6450_GPC(2), S3C_GPIO_PULL_UP);
+ base = S5P6450_GPC(0);
break;
case 1:
- s3c_gpio_cfgpin(S5P6450_GPC(4), S3C_GPIO_SFN(2));
- s3c_gpio_cfgpin(S5P6450_GPC(5), S3C_GPIO_SFN(2));
- s3c_gpio_cfgpin(S5P6450_GPC(6), S3C_GPIO_SFN(2));
- s3c_gpio_setpull(S5P6450_GPC(4), S3C_GPIO_PULL_UP);
- s3c_gpio_setpull(S5P6450_GPC(5), S3C_GPIO_PULL_UP);
- s3c_gpio_setpull(S5P6450_GPC(6), S3C_GPIO_PULL_UP);
+ base = S5P6450_GPC(4);
break;
default:
@@ -92,6 +79,9 @@ static int s5p6450_spi_cfg_gpio(struct platform_device *pdev)
return -EINVAL;
}
+ s3c_gpio_cfgall_range(base, 3,
+ S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
+
return 0;
}
diff --git a/arch/arm/mach-s5p64x0/dma.c b/arch/arm/mach-s5p64x0/dma.c
index 29a8c241004..d7ad944b347 100644
--- a/arch/arm/mach-s5p64x0/dma.c
+++ b/arch/arm/mach-s5p64x0/dma.c
@@ -122,7 +122,7 @@ static struct s3c_pl330_platdata s5p6450_pdma_pdata = {
static struct platform_device s5p64x0_device_pdma = {
.name = "s3c-pl330",
- .id = 0,
+ .id = -1,
.num_resources = ARRAY_SIZE(s5p64x0_pdma_resource),
.resource = s5p64x0_pdma_resource,
.dev = {
diff --git a/arch/arm/mach-s5p64x0/include/mach/regs-clock.h b/arch/arm/mach-s5p64x0/include/mach/regs-clock.h
index 58e1bc81380..a133f22fa15 100644
--- a/arch/arm/mach-s5p64x0/include/mach/regs-clock.h
+++ b/arch/arm/mach-s5p64x0/include/mach/regs-clock.h
@@ -60,4 +60,6 @@
#define ARM_DIV_RATIO_SHIFT 0
#define ARM_DIV_MASK (0xF << ARM_DIV_RATIO_SHIFT)
+#define S5P_EPLL_CON S5P64X0_EPLL_CON
+
#endif /* __ASM_ARCH_REGS_CLOCK_H */
diff --git a/arch/arm/mach-s5p64x0/include/mach/vmalloc.h b/arch/arm/mach-s5p64x0/include/mach/vmalloc.h
index 97a9df38f1c..38dcc71a03c 100644
--- a/arch/arm/mach-s5p64x0/include/mach/vmalloc.h
+++ b/arch/arm/mach-s5p64x0/include/mach/vmalloc.h
@@ -15,6 +15,6 @@
#ifndef __ASM_ARCH_VMALLOC_H
#define __ASM_ARCH_VMALLOC_H
-#define VMALLOC_END 0xE0000000UL
+#define VMALLOC_END 0xF6000000UL
#endif /* __ASM_ARCH_VMALLOC_H */
diff --git a/arch/arm/mach-s5p64x0/setup-i2c0.c b/arch/arm/mach-s5p64x0/setup-i2c0.c
index dc4cc65a501..46b463917c5 100644
--- a/arch/arm/mach-s5p64x0/setup-i2c0.c
+++ b/arch/arm/mach-s5p64x0/setup-i2c0.c
@@ -25,18 +25,14 @@ struct platform_device; /* don't need the contents */
void s5p6440_i2c0_cfg_gpio(struct platform_device *dev)
{
- s3c_gpio_cfgpin(S5P6440_GPB(5), S3C_GPIO_SFN(2));
- s3c_gpio_setpull(S5P6440_GPB(5), S3C_GPIO_PULL_UP);
- s3c_gpio_cfgpin(S5P6440_GPB(6), S3C_GPIO_SFN(2));
- s3c_gpio_setpull(S5P6440_GPB(6), S3C_GPIO_PULL_UP);
+ s3c_gpio_cfgall_range(S5P6440_GPB(5), 2,
+ S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
}
void s5p6450_i2c0_cfg_gpio(struct platform_device *dev)
{
- s3c_gpio_cfgpin(S5P6450_GPB(5), S3C_GPIO_SFN(2));
- s3c_gpio_setpull(S5P6450_GPB(5), S3C_GPIO_PULL_UP);
- s3c_gpio_cfgpin(S5P6450_GPB(6), S3C_GPIO_SFN(2));
- s3c_gpio_setpull(S5P6450_GPB(6), S3C_GPIO_PULL_UP);
+ s3c_gpio_cfgall_range(S5P6450_GPB(5), 2,
+ S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
}
void s3c_i2c0_cfg_gpio(struct platform_device *dev) { }
diff --git a/arch/arm/mach-s5p64x0/setup-i2c1.c b/arch/arm/mach-s5p64x0/setup-i2c1.c
index 2edd7912f8e..6ad3b986021 100644
--- a/arch/arm/mach-s5p64x0/setup-i2c1.c
+++ b/arch/arm/mach-s5p64x0/setup-i2c1.c
@@ -25,18 +25,14 @@ struct platform_device; /* don't need the contents */
void s5p6440_i2c1_cfg_gpio(struct platform_device *dev)
{
- s3c_gpio_cfgpin(S5P6440_GPR(9), S3C_GPIO_SFN(6));
- s3c_gpio_setpull(S5P6440_GPR(9), S3C_GPIO_PULL_UP);
- s3c_gpio_cfgpin(S5P6440_GPR(10), S3C_GPIO_SFN(6));
- s3c_gpio_setpull(S5P6440_GPR(10), S3C_GPIO_PULL_UP);
+ s3c_gpio_cfgall_range(S5P6440_GPR(9), 2,
+ S3C_GPIO_SFN(6), S3C_GPIO_PULL_UP);
}
void s5p6450_i2c1_cfg_gpio(struct platform_device *dev)
{
- s3c_gpio_cfgpin(S5P6450_GPR(9), S3C_GPIO_SFN(6));
- s3c_gpio_setpull(S5P6450_GPR(9), S3C_GPIO_PULL_UP);
- s3c_gpio_cfgpin(S5P6450_GPR(10), S3C_GPIO_SFN(6));
- s3c_gpio_setpull(S5P6450_GPR(10), S3C_GPIO_PULL_UP);
+ s3c_gpio_cfgall_range(S5P6450_GPR(9), 2,
+ S3C_GPIO_SFN(6), S3C_GPIO_PULL_UP);
}
void s3c_i2c1_cfg_gpio(struct platform_device *dev) { }
diff --git a/arch/arm/mach-s5pc100/Kconfig b/arch/arm/mach-s5pc100/Kconfig
index 77ae4bfb74b..b8fbf2fcba6 100644
--- a/arch/arm/mach-s5pc100/Kconfig
+++ b/arch/arm/mach-s5pc100/Kconfig
@@ -9,7 +9,6 @@ if ARCH_S5PC100
config CPU_S5PC100
bool
- select PLAT_S5P
select S5P_EXT_INT
select S3C_PL330_DMA
help
diff --git a/arch/arm/mach-s5pc100/Makefile b/arch/arm/mach-s5pc100/Makefile
index a021ed1fb4b..eecab57d2e5 100644
--- a/arch/arm/mach-s5pc100/Makefile
+++ b/arch/arm/mach-s5pc100/Makefile
@@ -11,7 +11,7 @@ obj- :=
# Core support for S5PC100 system
-obj-$(CONFIG_CPU_S5PC100) += cpu.o init.o clock.o gpiolib.o irq-gpio.o
+obj-$(CONFIG_CPU_S5PC100) += cpu.o init.o clock.o gpiolib.o
obj-$(CONFIG_CPU_S5PC100) += setup-i2c0.o
obj-$(CONFIG_CPU_S5PC100) += dma.o
diff --git a/arch/arm/mach-s5pc100/clock.c b/arch/arm/mach-s5pc100/clock.c
index 084abd13b0a..2d4a761a516 100644
--- a/arch/arm/mach-s5pc100/clock.c
+++ b/arch/arm/mach-s5pc100/clock.c
@@ -273,24 +273,6 @@ static struct clksrc_clk clk_div_hdmi = {
.reg_div = { .reg = S5P_CLK_DIV3, .shift = 28, .size = 4 },
};
-static int s5pc100_epll_enable(struct clk *clk, int enable)
-{
- unsigned int ctrlbit = clk->ctrlbit;
- unsigned int epll_con = __raw_readl(S5P_EPLL_CON) & ~ctrlbit;
-
- if (enable)
- __raw_writel(epll_con | ctrlbit, S5P_EPLL_CON);
- else
- __raw_writel(epll_con, S5P_EPLL_CON);
-
- return 0;
-}
-
-static unsigned long s5pc100_epll_get_rate(struct clk *clk)
-{
- return clk->rate;
-}
-
static u32 epll_div[][4] = {
{ 32750000, 131, 3, 4 },
{ 32768000, 131, 3, 4 },
@@ -341,13 +323,16 @@ static int s5pc100_epll_set_rate(struct clk *clk, unsigned long rate)
__raw_writel(epll_con, S5P_EPLL_CON);
+ printk(KERN_WARNING "EPLL Rate changes from %lu to %lu\n",
+ clk->rate, rate);
+
clk->rate = rate;
return 0;
}
static struct clk_ops s5pc100_epll_ops = {
- .get_rate = s5pc100_epll_get_rate,
+ .get_rate = s5p_epll_get_rate,
.set_rate = s5pc100_epll_set_rate,
};
@@ -691,55 +676,55 @@ static struct clk init_clocks_disable[] = {
}, {
.name = "iis",
.id = 0,
- .parent = &clk_div_d1_bus.clk,
+ .parent = &clk_div_pclkd1.clk,
.enable = s5pc100_d1_5_ctrl,
.ctrlbit = (1 << 0),
}, {
.name = "iis",
.id = 1,
- .parent = &clk_div_d1_bus.clk,
+ .parent = &clk_div_pclkd1.clk,
.enable = s5pc100_d1_5_ctrl,
.ctrlbit = (1 << 1),
}, {
.name = "iis",
.id = 2,
- .parent = &clk_div_d1_bus.clk,
+ .parent = &clk_div_pclkd1.clk,
.enable = s5pc100_d1_5_ctrl,
.ctrlbit = (1 << 2),
}, {
.name = "ac97",
.id = -1,
- .parent = &clk_div_d1_bus.clk,
+ .parent = &clk_div_pclkd1.clk,
.enable = s5pc100_d1_5_ctrl,
.ctrlbit = (1 << 3),
}, {
.name = "pcm",
.id = 0,
- .parent = &clk_div_d1_bus.clk,
+ .parent = &clk_div_pclkd1.clk,
.enable = s5pc100_d1_5_ctrl,
.ctrlbit = (1 << 4),
}, {
.name = "pcm",
.id = 1,
- .parent = &clk_div_d1_bus.clk,
+ .parent = &clk_div_pclkd1.clk,
.enable = s5pc100_d1_5_ctrl,
.ctrlbit = (1 << 5),
}, {
.name = "spdif",
.id = -1,
- .parent = &clk_div_d1_bus.clk,
+ .parent = &clk_div_pclkd1.clk,
.enable = s5pc100_d1_5_ctrl,
.ctrlbit = (1 << 6),
}, {
.name = "adc",
.id = -1,
- .parent = &clk_div_d1_bus.clk,
+ .parent = &clk_div_pclkd1.clk,
.enable = s5pc100_d1_5_ctrl,
.ctrlbit = (1 << 7),
}, {
.name = "keypad",
.id = -1,
- .parent = &clk_div_d1_bus.clk,
+ .parent = &clk_div_pclkd1.clk,
.enable = s5pc100_d1_5_ctrl,
.ctrlbit = (1 << 8),
}, {
@@ -848,6 +833,18 @@ struct clksrc_sources clk_src_group3 = {
.nr_sources = ARRAY_SIZE(clk_src_group3_list),
};
+static struct clksrc_clk clk_sclk_audio0 = {
+ .clk = {
+ .name = "sclk_audio",
+ .id = 0,
+ .ctrlbit = (1 << 8),
+ .enable = s5pc100_sclk1_ctrl,
+ },
+ .sources = &clk_src_group3,
+ .reg_src = { .reg = S5P_CLK_SRC3, .shift = 12, .size = 3 },
+ .reg_div = { .reg = S5P_CLK_DIV4, .shift = 12, .size = 4 },
+};
+
static struct clk *clk_src_group4_list[] = {
[0] = &clk_mout_epll.clk,
[1] = &clk_div_mpll.clk,
@@ -862,6 +859,18 @@ struct clksrc_sources clk_src_group4 = {
.nr_sources = ARRAY_SIZE(clk_src_group4_list),
};
+static struct clksrc_clk clk_sclk_audio1 = {
+ .clk = {
+ .name = "sclk_audio",
+ .id = 1,
+ .ctrlbit = (1 << 9),
+ .enable = s5pc100_sclk1_ctrl,
+ },
+ .sources = &clk_src_group4,
+ .reg_src = { .reg = S5P_CLK_SRC3, .shift = 16, .size = 3 },
+ .reg_div = { .reg = S5P_CLK_DIV4, .shift = 16, .size = 4 },
+};
+
static struct clk *clk_src_group5_list[] = {
[0] = &clk_mout_epll.clk,
[1] = &clk_div_mpll.clk,
@@ -875,6 +884,18 @@ struct clksrc_sources clk_src_group5 = {
.nr_sources = ARRAY_SIZE(clk_src_group5_list),
};
+static struct clksrc_clk clk_sclk_audio2 = {
+ .clk = {
+ .name = "sclk_audio",
+ .id = 2,
+ .ctrlbit = (1 << 10),
+ .enable = s5pc100_sclk1_ctrl,
+ },
+ .sources = &clk_src_group5,
+ .reg_src = { .reg = S5P_CLK_SRC3, .shift = 20, .size = 3 },
+ .reg_div = { .reg = S5P_CLK_DIV4, .shift = 20, .size = 4 },
+};
+
static struct clk *clk_src_group6_list[] = {
[0] = &s5p_clk_27m,
[1] = &clk_vclk54m,
@@ -944,6 +965,64 @@ struct clksrc_sources clk_src_pwi = {
.nr_sources = ARRAY_SIZE(clk_src_pwi_list),
};
+static struct clk *clk_sclk_spdif_list[] = {
+ [0] = &clk_sclk_audio0.clk,
+ [1] = &clk_sclk_audio1.clk,
+ [2] = &clk_sclk_audio2.clk,
+};
+
+struct clksrc_sources clk_src_sclk_spdif = {
+ .sources = clk_sclk_spdif_list,
+ .nr_sources = ARRAY_SIZE(clk_sclk_spdif_list),
+};
+
+static int s5pc100_spdif_set_rate(struct clk *clk, unsigned long rate)
+{
+ struct clk *pclk;
+ int ret;
+
+ pclk = clk_get_parent(clk);
+ if (IS_ERR(pclk))
+ return -EINVAL;
+
+ ret = pclk->ops->set_rate(pclk, rate);
+ clk_put(pclk);
+
+ return ret;
+}
+
+static unsigned long s5pc100_spdif_get_rate(struct clk *clk)
+{
+ struct clk *pclk;
+ int rate;
+
+ pclk = clk_get_parent(clk);
+ if (IS_ERR(pclk))
+ return -EINVAL;
+
+ rate = pclk->ops->get_rate(clk);
+ clk_put(pclk);
+
+ return rate;
+}
+
+static struct clk_ops s5pc100_sclk_spdif_ops = {
+ .set_rate = s5pc100_spdif_set_rate,
+ .get_rate = s5pc100_spdif_get_rate,
+};
+
+static struct clksrc_clk clk_sclk_spdif = {
+ .clk = {
+ .name = "sclk_spdif",
+ .id = -1,
+ .ctrlbit = (1 << 11),
+ .enable = s5pc100_sclk1_ctrl,
+ .ops = &s5pc100_sclk_spdif_ops,
+ },
+ .sources = &clk_src_sclk_spdif,
+ .reg_src = { .reg = S5P_CLK_SRC3, .shift = 24, .size = 2 },
+};
+
static struct clksrc_clk clksrcs[] = {
{
.clk = {
@@ -1001,39 +1080,6 @@ static struct clksrc_clk clksrcs[] = {
.reg_src = { .reg = S5P_CLK_SRC2, .shift = 28, .size = 2 },
}, {
.clk = {
- .name = "sclk_audio",
- .id = 0,
- .ctrlbit = (1 << 8),
- .enable = s5pc100_sclk1_ctrl,
-
- },
- .sources = &clk_src_group3,
- .reg_src = { .reg = S5P_CLK_SRC3, .shift = 12, .size = 3 },
- .reg_div = { .reg = S5P_CLK_DIV4, .shift = 12, .size = 4 },
- }, {
- .clk = {
- .name = "sclk_audio",
- .id = 1,
- .ctrlbit = (1 << 9),
- .enable = s5pc100_sclk1_ctrl,
-
- },
- .sources = &clk_src_group4,
- .reg_src = { .reg = S5P_CLK_SRC3, .shift = 16, .size = 3 },
- .reg_div = { .reg = S5P_CLK_DIV4, .shift = 16, .size = 4 },
- }, {
- .clk = {
- .name = "sclk_audio",
- .id = 2,
- .ctrlbit = (1 << 10),
- .enable = s5pc100_sclk1_ctrl,
-
- },
- .sources = &clk_src_group5,
- .reg_src = { .reg = S5P_CLK_SRC3, .shift = 20, .size = 3 },
- .reg_div = { .reg = S5P_CLK_DIV4, .shift = 20, .size = 4 },
- }, {
- .clk = {
.name = "sclk_lcd",
.id = -1,
.ctrlbit = (1 << 0),
@@ -1179,6 +1225,10 @@ static struct clksrc_clk *sysclks[] = {
&clk_div_pclkd1,
&clk_div_cam,
&clk_div_hdmi,
+ &clk_sclk_audio0,
+ &clk_sclk_audio1,
+ &clk_sclk_audio2,
+ &clk_sclk_spdif,
};
void __init_or_cpufreq s5pc100_setup_clocks(void)
@@ -1196,7 +1246,7 @@ void __init_or_cpufreq s5pc100_setup_clocks(void)
unsigned int ptr;
/* Set S5PC100 functions for clk_fout_epll */
- clk_fout_epll.enable = s5pc100_epll_enable;
+ clk_fout_epll.enable = s5p_epll_enable;
clk_fout_epll.ops = &s5pc100_epll_ops;
printk(KERN_DEBUG "%s: registering clocks\n", __func__);
diff --git a/arch/arm/mach-s5pc100/dev-audio.c b/arch/arm/mach-s5pc100/dev-audio.c
index a699ed6acc2..564e195ec49 100644
--- a/arch/arm/mach-s5pc100/dev-audio.c
+++ b/arch/arm/mach-s5pc100/dev-audio.c
@@ -24,19 +24,11 @@ static int s5pc100_cfg_i2s(struct platform_device *pdev)
/* configure GPIO for i2s port */
switch (pdev->id) {
case 1:
- s3c_gpio_cfgpin(S5PC100_GPC(0), S3C_GPIO_SFN(2));
- s3c_gpio_cfgpin(S5PC100_GPC(1), S3C_GPIO_SFN(2));
- s3c_gpio_cfgpin(S5PC100_GPC(2), S3C_GPIO_SFN(2));
- s3c_gpio_cfgpin(S5PC100_GPC(3), S3C_GPIO_SFN(2));
- s3c_gpio_cfgpin(S5PC100_GPC(4), S3C_GPIO_SFN(2));
+ s3c_gpio_cfgpin_range(S5PC100_GPC(0), 5, S3C_GPIO_SFN(2));
break;
case 2:
- s3c_gpio_cfgpin(S5PC100_GPG3(0), S3C_GPIO_SFN(4));
- s3c_gpio_cfgpin(S5PC100_GPG3(1), S3C_GPIO_SFN(4));
- s3c_gpio_cfgpin(S5PC100_GPG3(2), S3C_GPIO_SFN(4));
- s3c_gpio_cfgpin(S5PC100_GPG3(3), S3C_GPIO_SFN(4));
- s3c_gpio_cfgpin(S5PC100_GPG3(4), S3C_GPIO_SFN(4));
+ s3c_gpio_cfgpin_range(S5PC100_GPG3(0), 5, S3C_GPIO_SFN(4));
break;
case -1: /* Dedicated pins */
@@ -144,19 +136,11 @@ static int s5pc100_pcm_cfg_gpio(struct platform_device *pdev)
{
switch (pdev->id) {
case 0:
- s3c_gpio_cfgpin(S5PC100_GPG3(0), S3C_GPIO_SFN(5));
- s3c_gpio_cfgpin(S5PC100_GPG3(1), S3C_GPIO_SFN(5));
- s3c_gpio_cfgpin(S5PC100_GPG3(2), S3C_GPIO_SFN(5));
- s3c_gpio_cfgpin(S5PC100_GPG3(3), S3C_GPIO_SFN(5));
- s3c_gpio_cfgpin(S5PC100_GPG3(4), S3C_GPIO_SFN(5));
+ s3c_gpio_cfgpin_range(S5PC100_GPG3(0), 5, S3C_GPIO_SFN(5));
break;
case 1:
- s3c_gpio_cfgpin(S5PC100_GPC(0), S3C_GPIO_SFN(3));
- s3c_gpio_cfgpin(S5PC100_GPC(1), S3C_GPIO_SFN(3));
- s3c_gpio_cfgpin(S5PC100_GPC(2), S3C_GPIO_SFN(3));
- s3c_gpio_cfgpin(S5PC100_GPC(3), S3C_GPIO_SFN(3));
- s3c_gpio_cfgpin(S5PC100_GPC(4), S3C_GPIO_SFN(3));
+ s3c_gpio_cfgpin_range(S5PC100_GPC(0), 5, S3C_GPIO_SFN(3));
break;
default:
@@ -231,13 +215,7 @@ struct platform_device s5pc100_device_pcm1 = {
static int s5pc100_ac97_cfg_gpio(struct platform_device *pdev)
{
- s3c_gpio_cfgpin(S5PC100_GPC(0), S3C_GPIO_SFN(4));
- s3c_gpio_cfgpin(S5PC100_GPC(1), S3C_GPIO_SFN(4));
- s3c_gpio_cfgpin(S5PC100_GPC(2), S3C_GPIO_SFN(4));
- s3c_gpio_cfgpin(S5PC100_GPC(3), S3C_GPIO_SFN(4));
- s3c_gpio_cfgpin(S5PC100_GPC(4), S3C_GPIO_SFN(4));
-
- return 0;
+ return s3c_gpio_cfgpin_range(S5PC100_GPC(0), 5, S3C_GPIO_SFN(4));
}
static struct resource s5pc100_ac97_resource[] = {
@@ -285,3 +263,57 @@ struct platform_device s5pc100_device_ac97 = {
.coherent_dma_mask = DMA_BIT_MASK(32),
},
};
+
+/* S/PDIF Controller platform_device */
+static int s5pc100_spdif_cfg_gpd(struct platform_device *pdev)
+{
+ s3c_gpio_cfgpin_range(S5PC100_GPD(5), 2, S3C_GPIO_SFN(3));
+
+ return 0;
+}
+
+static int s5pc100_spdif_cfg_gpg3(struct platform_device *pdev)
+{
+ s3c_gpio_cfgpin_range(S5PC100_GPG3(5), 2, S3C_GPIO_SFN(3));
+
+ return 0;
+}
+
+static struct resource s5pc100_spdif_resource[] = {
+ [0] = {
+ .start = S5PC100_PA_SPDIF,
+ .end = S5PC100_PA_SPDIF + 0x100 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = DMACH_SPDIF,
+ .end = DMACH_SPDIF,
+ .flags = IORESOURCE_DMA,
+ },
+};
+
+static struct s3c_audio_pdata s5p_spdif_pdata = {
+ .cfg_gpio = s5pc100_spdif_cfg_gpd,
+};
+
+static u64 s5pc100_spdif_dmamask = DMA_BIT_MASK(32);
+
+struct platform_device s5pc100_device_spdif = {
+ .name = "samsung-spdif",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(s5pc100_spdif_resource),
+ .resource = s5pc100_spdif_resource,
+ .dev = {
+ .platform_data = &s5p_spdif_pdata,
+ .dma_mask = &s5pc100_spdif_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+};
+
+void __init s5pc100_spdif_setup_gpio(int gpio)
+{
+ if (gpio == S5PC100_SPDIF_GPD)
+ s5p_spdif_pdata.cfg_gpio = s5pc100_spdif_cfg_gpd;
+ else
+ s5p_spdif_pdata.cfg_gpio = s5pc100_spdif_cfg_gpg3;
+}
diff --git a/arch/arm/mach-s5pc100/dev-spi.c b/arch/arm/mach-s5pc100/dev-spi.c
index a0ef7c302c1..57b19794d9b 100644
--- a/arch/arm/mach-s5pc100/dev-spi.c
+++ b/arch/arm/mach-s5pc100/dev-spi.c
@@ -38,30 +38,20 @@ static int s5pc100_spi_cfg_gpio(struct platform_device *pdev)
{
switch (pdev->id) {
case 0:
- s3c_gpio_cfgpin(S5PC100_GPB(0), S3C_GPIO_SFN(2));
- s3c_gpio_cfgpin(S5PC100_GPB(1), S3C_GPIO_SFN(2));
- s3c_gpio_cfgpin(S5PC100_GPB(2), S3C_GPIO_SFN(2));
- s3c_gpio_setpull(S5PC100_GPB(0), S3C_GPIO_PULL_UP);
- s3c_gpio_setpull(S5PC100_GPB(1), S3C_GPIO_PULL_UP);
- s3c_gpio_setpull(S5PC100_GPB(2), S3C_GPIO_PULL_UP);
+ s3c_gpio_cfgall_range(S5PC100_GPB(0), 3,
+ S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
break;
case 1:
- s3c_gpio_cfgpin(S5PC100_GPB(4), S3C_GPIO_SFN(2));
- s3c_gpio_cfgpin(S5PC100_GPB(5), S3C_GPIO_SFN(2));
- s3c_gpio_cfgpin(S5PC100_GPB(6), S3C_GPIO_SFN(2));
- s3c_gpio_setpull(S5PC100_GPB(4), S3C_GPIO_PULL_UP);
- s3c_gpio_setpull(S5PC100_GPB(5), S3C_GPIO_PULL_UP);
- s3c_gpio_setpull(S5PC100_GPB(6), S3C_GPIO_PULL_UP);
+ s3c_gpio_cfgall_range(S5PC100_GPB(4), 3,
+ S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
break;
case 2:
s3c_gpio_cfgpin(S5PC100_GPG3(0), S3C_GPIO_SFN(3));
- s3c_gpio_cfgpin(S5PC100_GPG3(2), S3C_GPIO_SFN(3));
- s3c_gpio_cfgpin(S5PC100_GPG3(3), S3C_GPIO_SFN(3));
s3c_gpio_setpull(S5PC100_GPG3(0), S3C_GPIO_PULL_UP);
- s3c_gpio_setpull(S5PC100_GPG3(2), S3C_GPIO_PULL_UP);
- s3c_gpio_setpull(S5PC100_GPG3(3), S3C_GPIO_PULL_UP);
+ s3c_gpio_cfgall_range(S5PC100_GPB(2), 2,
+ S3C_GPIO_SFN(3), S3C_GPIO_PULL_UP);
break;
default:
diff --git a/arch/arm/mach-s5pc100/dma.c b/arch/arm/mach-s5pc100/dma.c
index 0f5517571e2..bf4cd0fb97c 100644
--- a/arch/arm/mach-s5pc100/dma.c
+++ b/arch/arm/mach-s5pc100/dma.c
@@ -81,7 +81,7 @@ static struct s3c_pl330_platdata s5pc100_pdma0_pdata = {
static struct platform_device s5pc100_device_pdma0 = {
.name = "s3c-pl330",
- .id = 1,
+ .id = 0,
.num_resources = ARRAY_SIZE(s5pc100_pdma0_resource),
.resource = s5pc100_pdma0_resource,
.dev = {
@@ -143,7 +143,7 @@ static struct s3c_pl330_platdata s5pc100_pdma1_pdata = {
static struct platform_device s5pc100_device_pdma1 = {
.name = "s3c-pl330",
- .id = 2,
+ .id = 1,
.num_resources = ARRAY_SIZE(s5pc100_pdma1_resource),
.resource = s5pc100_pdma1_resource,
.dev = {
diff --git a/arch/arm/mach-s5pc100/gpiolib.c b/arch/arm/mach-s5pc100/gpiolib.c
index 0fab7f2cd8b..20856eb7dd5 100644
--- a/arch/arm/mach-s5pc100/gpiolib.c
+++ b/arch/arm/mach-s5pc100/gpiolib.c
@@ -1,5 +1,7 @@
-/*
- * arch/arm/plat-s5pc100/gpiolib.c
+/* linux/arch/arm/mach-s5pc100/gpiolib.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
*
* Copyright 2009 Samsung Electronics Co
* Kyungmin Park <kyungmin.park@samsung.com>
@@ -61,30 +63,6 @@
* L3 8 4Bit None
*/
-static int s5pc100_gpiolib_to_irq(struct gpio_chip *chip, unsigned int offset)
-{
- return S3C_IRQ_GPIO(chip->base + offset);
-}
-
-static int s5pc100_gpiolib_to_eint(struct gpio_chip *chip, unsigned int offset)
-{
- int base;
-
- base = chip->base - S5PC100_GPH0(0);
- if (base == 0)
- return IRQ_EINT(offset);
- base = chip->base - S5PC100_GPH1(0);
- if (base == 0)
- return IRQ_EINT(8 + offset);
- base = chip->base - S5PC100_GPH2(0);
- if (base == 0)
- return IRQ_EINT(16 + offset);
- base = chip->base - S5PC100_GPH3(0);
- if (base == 0)
- return IRQ_EINT(24 + offset);
- return -EINVAL;
-}
-
static struct s3c_gpio_cfg gpio_cfg = {
.set_config = s3c_gpio_setcfg_s3c64xx_4bit,
.set_pull = s3c_gpio_setpull_updown,
@@ -104,209 +82,150 @@ static struct s3c_gpio_cfg gpio_cfg_noint = {
.get_pull = s3c_gpio_getpull_updown,
};
+/*
+ * GPIO bank's base address given the index of the bank in the
+ * list of all gpio banks.
+ */
+#define S5PC100_BANK_BASE(bank_nr) (S5P_VA_GPIO + ((bank_nr) * 0x20))
+
+/*
+ * Following are the gpio banks in S5PC100.
+ *
+ * The 'config' member when left to NULL, is initialized to the default
+ * structure gpio_cfg in the init function below.
+ *
+ * The 'base' member is also initialized in the init function below.
+ * Note: The initialization of 'base' member of s3c_gpio_chip structure
+ * uses the above macro and depends on the banks being listed in order here.
+ */
static struct s3c_gpio_chip s5pc100_gpio_chips[] = {
{
- .base = S5PC100_GPA0_BASE,
- .config = &gpio_cfg,
.chip = {
.base = S5PC100_GPA0(0),
.ngpio = S5PC100_GPIO_A0_NR,
.label = "GPA0",
},
}, {
- .base = S5PC100_GPA1_BASE,
- .config = &gpio_cfg,
.chip = {
.base = S5PC100_GPA1(0),
.ngpio = S5PC100_GPIO_A1_NR,
.label = "GPA1",
},
}, {
- .base = S5PC100_GPB_BASE,
- .config = &gpio_cfg,
.chip = {
.base = S5PC100_GPB(0),
.ngpio = S5PC100_GPIO_B_NR,
.label = "GPB",
},
}, {
- .base = S5PC100_GPC_BASE,
- .config = &gpio_cfg,
.chip = {
.base = S5PC100_GPC(0),
.ngpio = S5PC100_GPIO_C_NR,
.label = "GPC",
},
}, {
- .base = S5PC100_GPD_BASE,
- .config = &gpio_cfg,
.chip = {
.base = S5PC100_GPD(0),
.ngpio = S5PC100_GPIO_D_NR,
.label = "GPD",
},
}, {
- .base = S5PC100_GPE0_BASE,
- .config = &gpio_cfg,
.chip = {
.base = S5PC100_GPE0(0),
.ngpio = S5PC100_GPIO_E0_NR,
.label = "GPE0",
},
}, {
- .base = S5PC100_GPE1_BASE,
- .config = &gpio_cfg,
.chip = {
.base = S5PC100_GPE1(0),
.ngpio = S5PC100_GPIO_E1_NR,
.label = "GPE1",
},
}, {
- .base = S5PC100_GPF0_BASE,
- .config = &gpio_cfg,
.chip = {
.base = S5PC100_GPF0(0),
.ngpio = S5PC100_GPIO_F0_NR,
.label = "GPF0",
},
}, {
- .base = S5PC100_GPF1_BASE,
- .config = &gpio_cfg,
.chip = {
.base = S5PC100_GPF1(0),
.ngpio = S5PC100_GPIO_F1_NR,
.label = "GPF1",
},
}, {
- .base = S5PC100_GPF2_BASE,
- .config = &gpio_cfg,
.chip = {
.base = S5PC100_GPF2(0),
.ngpio = S5PC100_GPIO_F2_NR,
.label = "GPF2",
},
}, {
- .base = S5PC100_GPF3_BASE,
- .config = &gpio_cfg,
.chip = {
.base = S5PC100_GPF3(0),
.ngpio = S5PC100_GPIO_F3_NR,
.label = "GPF3",
},
}, {
- .base = S5PC100_GPG0_BASE,
- .config = &gpio_cfg,
.chip = {
.base = S5PC100_GPG0(0),
.ngpio = S5PC100_GPIO_G0_NR,
.label = "GPG0",
},
}, {
- .base = S5PC100_GPG1_BASE,
- .config = &gpio_cfg,
.chip = {
.base = S5PC100_GPG1(0),
.ngpio = S5PC100_GPIO_G1_NR,
.label = "GPG1",
},
}, {
- .base = S5PC100_GPG2_BASE,
- .config = &gpio_cfg,
.chip = {
.base = S5PC100_GPG2(0),
.ngpio = S5PC100_GPIO_G2_NR,
.label = "GPG2",
},
}, {
- .base = S5PC100_GPG3_BASE,
- .config = &gpio_cfg,
.chip = {
.base = S5PC100_GPG3(0),
.ngpio = S5PC100_GPIO_G3_NR,
.label = "GPG3",
},
}, {
- .base = S5PC100_GPH0_BASE,
- .config = &gpio_cfg_eint,
- .chip = {
- .base = S5PC100_GPH0(0),
- .ngpio = S5PC100_GPIO_H0_NR,
- .label = "GPH0",
- },
- }, {
- .base = S5PC100_GPH1_BASE,
- .config = &gpio_cfg_eint,
- .chip = {
- .base = S5PC100_GPH1(0),
- .ngpio = S5PC100_GPIO_H1_NR,
- .label = "GPH1",
- },
- }, {
- .base = S5PC100_GPH2_BASE,
- .config = &gpio_cfg_eint,
- .chip = {
- .base = S5PC100_GPH2(0),
- .ngpio = S5PC100_GPIO_H2_NR,
- .label = "GPH2",
- },
- }, {
- .base = S5PC100_GPH3_BASE,
- .config = &gpio_cfg_eint,
- .chip = {
- .base = S5PC100_GPH3(0),
- .ngpio = S5PC100_GPIO_H3_NR,
- .label = "GPH3",
- },
- }, {
- .base = S5PC100_GPI_BASE,
- .config = &gpio_cfg,
.chip = {
.base = S5PC100_GPI(0),
.ngpio = S5PC100_GPIO_I_NR,
.label = "GPI",
},
}, {
- .base = S5PC100_GPJ0_BASE,
- .config = &gpio_cfg,
.chip = {
.base = S5PC100_GPJ0(0),
.ngpio = S5PC100_GPIO_J0_NR,
.label = "GPJ0",
},
}, {
- .base = S5PC100_GPJ1_BASE,
- .config = &gpio_cfg,
.chip = {
.base = S5PC100_GPJ1(0),
.ngpio = S5PC100_GPIO_J1_NR,
.label = "GPJ1",
},
}, {
- .base = S5PC100_GPJ2_BASE,
- .config = &gpio_cfg,
.chip = {
.base = S5PC100_GPJ2(0),
.ngpio = S5PC100_GPIO_J2_NR,
.label = "GPJ2",
},
}, {
- .base = S5PC100_GPJ3_BASE,
- .config = &gpio_cfg,
.chip = {
.base = S5PC100_GPJ3(0),
.ngpio = S5PC100_GPIO_J3_NR,
.label = "GPJ3",
},
}, {
- .base = S5PC100_GPJ4_BASE,
- .config = &gpio_cfg,
.chip = {
.base = S5PC100_GPJ4(0),
.ngpio = S5PC100_GPIO_J4_NR,
.label = "GPJ4",
},
}, {
- .base = S5PC100_GPK0_BASE,
.config = &gpio_cfg_noint,
.chip = {
.base = S5PC100_GPK0(0),
@@ -314,7 +233,6 @@ static struct s3c_gpio_chip s5pc100_gpio_chips[] = {
.label = "GPK0",
},
}, {
- .base = S5PC100_GPK1_BASE,
.config = &gpio_cfg_noint,
.chip = {
.base = S5PC100_GPK1(0),
@@ -322,7 +240,6 @@ static struct s3c_gpio_chip s5pc100_gpio_chips[] = {
.label = "GPK1",
},
}, {
- .base = S5PC100_GPK2_BASE,
.config = &gpio_cfg_noint,
.chip = {
.base = S5PC100_GPK2(0),
@@ -330,7 +247,6 @@ static struct s3c_gpio_chip s5pc100_gpio_chips[] = {
.label = "GPK2",
},
}, {
- .base = S5PC100_GPK3_BASE,
.config = &gpio_cfg_noint,
.chip = {
.base = S5PC100_GPK3(0),
@@ -338,7 +254,6 @@ static struct s3c_gpio_chip s5pc100_gpio_chips[] = {
.label = "GPK3",
},
}, {
- .base = S5PC100_GPL0_BASE,
.config = &gpio_cfg_noint,
.chip = {
.base = S5PC100_GPL0(0),
@@ -346,7 +261,6 @@ static struct s3c_gpio_chip s5pc100_gpio_chips[] = {
.label = "GPL0",
},
}, {
- .base = S5PC100_GPL1_BASE,
.config = &gpio_cfg_noint,
.chip = {
.base = S5PC100_GPL1(0),
@@ -354,7 +268,6 @@ static struct s3c_gpio_chip s5pc100_gpio_chips[] = {
.label = "GPL1",
},
}, {
- .base = S5PC100_GPL2_BASE,
.config = &gpio_cfg_noint,
.chip = {
.base = S5PC100_GPL2(0),
@@ -362,7 +275,6 @@ static struct s3c_gpio_chip s5pc100_gpio_chips[] = {
.label = "GPL2",
},
}, {
- .base = S5PC100_GPL3_BASE,
.config = &gpio_cfg_noint,
.chip = {
.base = S5PC100_GPL3(0),
@@ -370,56 +282,72 @@ static struct s3c_gpio_chip s5pc100_gpio_chips[] = {
.label = "GPL3",
},
}, {
- .base = S5PC100_GPL4_BASE,
.config = &gpio_cfg_noint,
.chip = {
.base = S5PC100_GPL4(0),
.ngpio = S5PC100_GPIO_L4_NR,
.label = "GPL4",
},
+ }, {
+ .base = (S5P_VA_GPIO + 0xC00),
+ .config = &gpio_cfg_eint,
+ .irq_base = IRQ_EINT(0),
+ .chip = {
+ .base = S5PC100_GPH0(0),
+ .ngpio = S5PC100_GPIO_H0_NR,
+ .label = "GPH0",
+ .to_irq = samsung_gpiolib_to_irq,
+ },
+ }, {
+ .base = (S5P_VA_GPIO + 0xC20),
+ .config = &gpio_cfg_eint,
+ .irq_base = IRQ_EINT(8),
+ .chip = {
+ .base = S5PC100_GPH1(0),
+ .ngpio = S5PC100_GPIO_H1_NR,
+ .label = "GPH1",
+ .to_irq = samsung_gpiolib_to_irq,
+ },
+ }, {
+ .base = (S5P_VA_GPIO + 0xC40),
+ .config = &gpio_cfg_eint,
+ .irq_base = IRQ_EINT(16),
+ .chip = {
+ .base = S5PC100_GPH2(0),
+ .ngpio = S5PC100_GPIO_H2_NR,
+ .label = "GPH2",
+ .to_irq = samsung_gpiolib_to_irq,
+ },
+ }, {
+ .base = (S5P_VA_GPIO + 0xC60),
+ .config = &gpio_cfg_eint,
+ .irq_base = IRQ_EINT(24),
+ .chip = {
+ .base = S5PC100_GPH3(0),
+ .ngpio = S5PC100_GPIO_H3_NR,
+ .label = "GPH3",
+ .to_irq = samsung_gpiolib_to_irq,
+ },
},
};
-/* FIXME move from irq-gpio.c */
-extern struct irq_chip s5pc100_gpioint;
-extern void s5pc100_irq_gpioint_handler(unsigned int irq, struct irq_desc *desc);
-
-static __init void s5pc100_gpiolib_link(struct s3c_gpio_chip *chip)
+static __init int s5pc100_gpiolib_init(void)
{
- /* Interrupt */
- if (chip->config == &gpio_cfg) {
- int i, irq;
-
- chip->chip.to_irq = s5pc100_gpiolib_to_irq;
+ struct s3c_gpio_chip *chip = s5pc100_gpio_chips;
+ int nr_chips = ARRAY_SIZE(s5pc100_gpio_chips);
+ int gpioint_group = 0;
+ int i;
- for (i = 0; i < chip->chip.ngpio; i++) {
- irq = S3C_IRQ_GPIO_BASE + chip->chip.base + i;
- set_irq_chip(irq, &s5pc100_gpioint);
- set_irq_data(irq, &chip->chip);
- set_irq_handler(irq, handle_level_irq);
- set_irq_flags(irq, IRQF_VALID);
+ for (i = 0; i < nr_chips; i++, chip++) {
+ if (chip->config == NULL) {
+ chip->config = &gpio_cfg;
+ chip->group = gpioint_group++;
}
- } else if (chip->config == &gpio_cfg_eint) {
- chip->chip.to_irq = s5pc100_gpiolib_to_eint;
+ if (chip->base == NULL)
+ chip->base = S5PC100_BANK_BASE(i);
}
-}
-
-static __init int s5pc100_gpiolib_init(void)
-{
- struct s3c_gpio_chip *chip;
- int nr_chips;
-
- chip = s5pc100_gpio_chips;
- nr_chips = ARRAY_SIZE(s5pc100_gpio_chips);
-
- for (; nr_chips > 0; nr_chips--, chip++)
- s5pc100_gpiolib_link(chip);
-
- samsung_gpiolib_add_4bit_chips(s5pc100_gpio_chips,
- ARRAY_SIZE(s5pc100_gpio_chips));
- /* Interrupt */
- set_irq_chained_handler(IRQ_GPIOINT, s5pc100_irq_gpioint_handler);
+ samsung_gpiolib_add_4bit_chips(s5pc100_gpio_chips, nr_chips);
return 0;
}
diff --git a/arch/arm/mach-s5pc100/include/mach/gpio.h b/arch/arm/mach-s5pc100/include/mach/gpio.h
index 71ae1f52df1..29a8a12d9b4 100644
--- a/arch/arm/mach-s5pc100/include/mach/gpio.h
+++ b/arch/arm/mach-s5pc100/include/mach/gpio.h
@@ -146,13 +146,6 @@ enum s5p_gpio_number {
/* define the number of gpios we need to the one after the MP04() range */
#define ARCH_NR_GPIOS (S5PC100_GPIO_END + 1)
-#define EINT_MODE S3C_GPIO_SFN(0x2)
-
-#define EINT_GPIO_0(x) S5PC100_GPH0(x)
-#define EINT_GPIO_1(x) S5PC100_GPH1(x)
-#define EINT_GPIO_2(x) S5PC100_GPH2(x)
-#define EINT_GPIO_3(x) S5PC100_GPH3(x)
-
#include <asm-generic/gpio.h>
#endif /* __ASM_ARCH_GPIO_H */
diff --git a/arch/arm/mach-s5pc100/include/mach/irqs.h b/arch/arm/mach-s5pc100/include/mach/irqs.h
index 06513e64724..d2eb4757381 100644
--- a/arch/arm/mach-s5pc100/include/mach/irqs.h
+++ b/arch/arm/mach-s5pc100/include/mach/irqs.h
@@ -48,8 +48,8 @@
#define IRQ_SPI1 S5P_IRQ_VIC1(16)
#define IRQ_SPI2 S5P_IRQ_VIC1(17)
#define IRQ_IRDA S5P_IRQ_VIC1(18)
-#define IRQ_CAN0 S5P_IRQ_VIC1(19)
-#define IRQ_CAN1 S5P_IRQ_VIC1(20)
+#define IRQ_IIC2 S5P_IRQ_VIC1(19)
+#define IRQ_IIC3 S5P_IRQ_VIC1(20)
#define IRQ_HSIRX S5P_IRQ_VIC1(21)
#define IRQ_HSITX S5P_IRQ_VIC1(22)
#define IRQ_UHOST S5P_IRQ_VIC1(23)
@@ -100,11 +100,12 @@
#define S5P_EINT_BASE1 (S5P_IRQ_VIC0(0))
#define S5P_EINT_BASE2 (IRQ_VIC_END + 1)
-#define S3C_IRQ_GPIO_BASE (IRQ_EINT(31) + 1)
-#define S3C_IRQ_GPIO(x) (S3C_IRQ_GPIO_BASE + (x))
+/* GPIO interrupt */
+#define S5P_GPIOINT_BASE (IRQ_EINT(31) + 1)
+#define S5P_GPIOINT_GROUP_MAXNR 21
-/* Until MP04 Groups -> 40 (exactly 39) Groups * 8 ~= 320 GPIOs */
-#define NR_IRQS (S3C_IRQ_GPIO(320) + 1)
+/* Set the default NR_IRQS */
+#define NR_IRQS (IRQ_EINT(31) + S5P_GPIOINT_COUNT + 1)
/* Compatibility */
#define IRQ_LCD_FIFO IRQ_LCD0
diff --git a/arch/arm/mach-s5pc100/include/mach/map.h b/arch/arm/mach-s5pc100/include/mach/map.h
index 8751ef4a680..32e9cab5c86 100644
--- a/arch/arm/mach-s5pc100/include/mach/map.h
+++ b/arch/arm/mach-s5pc100/include/mach/map.h
@@ -110,6 +110,8 @@
#define S5PC100_PA_PCM0 0xF2400000
#define S5PC100_PA_PCM1 0xF2500000
+#define S5PC100_PA_SPDIF 0xF2600000
+
#define S5PC100_PA_TSADC (0xF3000000)
/* KEYPAD */
diff --git a/arch/arm/mach-s5pc100/include/mach/regs-gpio.h b/arch/arm/mach-s5pc100/include/mach/regs-gpio.h
index dd6295e1251..0bf73209ec7 100644
--- a/arch/arm/mach-s5pc100/include/mach/regs-gpio.h
+++ b/arch/arm/mach-s5pc100/include/mach/regs-gpio.h
@@ -11,43 +11,6 @@
#include <mach/map.h>
-/* S5PC100 */
-#define S5PC100_GPIO_BASE S5P_VA_GPIO
-#define S5PC100_GPA0_BASE (S5PC100_GPIO_BASE + 0x0000)
-#define S5PC100_GPA1_BASE (S5PC100_GPIO_BASE + 0x0020)
-#define S5PC100_GPB_BASE (S5PC100_GPIO_BASE + 0x0040)
-#define S5PC100_GPC_BASE (S5PC100_GPIO_BASE + 0x0060)
-#define S5PC100_GPD_BASE (S5PC100_GPIO_BASE + 0x0080)
-#define S5PC100_GPE0_BASE (S5PC100_GPIO_BASE + 0x00A0)
-#define S5PC100_GPE1_BASE (S5PC100_GPIO_BASE + 0x00C0)
-#define S5PC100_GPF0_BASE (S5PC100_GPIO_BASE + 0x00E0)
-#define S5PC100_GPF1_BASE (S5PC100_GPIO_BASE + 0x0100)
-#define S5PC100_GPF2_BASE (S5PC100_GPIO_BASE + 0x0120)
-#define S5PC100_GPF3_BASE (S5PC100_GPIO_BASE + 0x0140)
-#define S5PC100_GPG0_BASE (S5PC100_GPIO_BASE + 0x0160)
-#define S5PC100_GPG1_BASE (S5PC100_GPIO_BASE + 0x0180)
-#define S5PC100_GPG2_BASE (S5PC100_GPIO_BASE + 0x01A0)
-#define S5PC100_GPG3_BASE (S5PC100_GPIO_BASE + 0x01C0)
-#define S5PC100_GPH0_BASE (S5PC100_GPIO_BASE + 0x0C00)
-#define S5PC100_GPH1_BASE (S5PC100_GPIO_BASE + 0x0C20)
-#define S5PC100_GPH2_BASE (S5PC100_GPIO_BASE + 0x0C40)
-#define S5PC100_GPH3_BASE (S5PC100_GPIO_BASE + 0x0C60)
-#define S5PC100_GPI_BASE (S5PC100_GPIO_BASE + 0x01E0)
-#define S5PC100_GPJ0_BASE (S5PC100_GPIO_BASE + 0x0200)
-#define S5PC100_GPJ1_BASE (S5PC100_GPIO_BASE + 0x0220)
-#define S5PC100_GPJ2_BASE (S5PC100_GPIO_BASE + 0x0240)
-#define S5PC100_GPJ3_BASE (S5PC100_GPIO_BASE + 0x0260)
-#define S5PC100_GPJ4_BASE (S5PC100_GPIO_BASE + 0x0280)
-#define S5PC100_GPK0_BASE (S5PC100_GPIO_BASE + 0x02A0)
-#define S5PC100_GPK1_BASE (S5PC100_GPIO_BASE + 0x02C0)
-#define S5PC100_GPK2_BASE (S5PC100_GPIO_BASE + 0x02E0)
-#define S5PC100_GPK3_BASE (S5PC100_GPIO_BASE + 0x0300)
-#define S5PC100_GPL0_BASE (S5PC100_GPIO_BASE + 0x0320)
-#define S5PC100_GPL1_BASE (S5PC100_GPIO_BASE + 0x0340)
-#define S5PC100_GPL2_BASE (S5PC100_GPIO_BASE + 0x0360)
-#define S5PC100_GPL3_BASE (S5PC100_GPIO_BASE + 0x0380)
-#define S5PC100_GPL4_BASE (S5PC100_GPIO_BASE + 0x03A0)
-
#define S5PC100EINT30CON (S5P_VA_GPIO + 0xE00)
#define S5P_EINT_CON(x) (S5PC100EINT30CON + ((x) * 0x4))
@@ -64,12 +27,12 @@
#define eint_irq_to_bit(irq) (1 << (EINT_OFFSET(irq) & 0x7))
-/* values for S5P_EXTINT0 */
-#define S5P_EXTINT_LOWLEV (0x00)
-#define S5P_EXTINT_HILEV (0x01)
-#define S5P_EXTINT_FALLEDGE (0x02)
-#define S5P_EXTINT_RISEEDGE (0x03)
-#define S5P_EXTINT_BOTHEDGE (0x04)
+#define EINT_MODE S3C_GPIO_SFN(0x2)
+
+#define EINT_GPIO_0(x) S5PC100_GPH0(x)
+#define EINT_GPIO_1(x) S5PC100_GPH1(x)
+#define EINT_GPIO_2(x) S5PC100_GPH2(x)
+#define EINT_GPIO_3(x) S5PC100_GPH3(x)
#endif /* __ASM_MACH_S5PC100_REGS_GPIO_H */
diff --git a/arch/arm/mach-s5pc100/include/mach/vmalloc.h b/arch/arm/mach-s5pc100/include/mach/vmalloc.h
index be9df79903e..44c8e5726d9 100644
--- a/arch/arm/mach-s5pc100/include/mach/vmalloc.h
+++ b/arch/arm/mach-s5pc100/include/mach/vmalloc.h
@@ -12,6 +12,6 @@
#ifndef __ASM_ARCH_VMALLOC_H
#define __ASM_ARCH_VMALLOC_H
-#define VMALLOC_END (0xe0000000UL)
+#define VMALLOC_END 0xF6000000UL
#endif /* __ASM_ARCH_VMALLOC_H */
diff --git a/arch/arm/mach-s5pc100/irq-gpio.c b/arch/arm/mach-s5pc100/irq-gpio.c
deleted file mode 100644
index 2bf86c18bc7..00000000000
--- a/arch/arm/mach-s5pc100/irq-gpio.c
+++ /dev/null
@@ -1,266 +0,0 @@
-/*
- * arch/arm/mach-s5pc100/irq-gpio.c
- *
- * Copyright (C) 2009 Samsung Electronics
- *
- * S5PC100 - Interrupt handling for IRQ_GPIO${group}(x)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-
-#include <mach/map.h>
-#include <plat/gpio-cfg.h>
-
-#define S5P_GPIOREG(x) (S5P_VA_GPIO + (x))
-
-#define CON_OFFSET 0x700
-#define MASK_OFFSET 0x900
-#define PEND_OFFSET 0xA00
-#define CON_OFFSET_2 0xE00
-#define MASK_OFFSET_2 0xF00
-#define PEND_OFFSET_2 0xF40
-
-#define GPIOINT_LEVEL_LOW 0x0
-#define GPIOINT_LEVEL_HIGH 0x1
-#define GPIOINT_EDGE_FALLING 0x2
-#define GPIOINT_EDGE_RISING 0x3
-#define GPIOINT_EDGE_BOTH 0x4
-
-static int group_to_con_offset(int group)
-{
- return group << 2;
-}
-
-static int group_to_mask_offset(int group)
-{
- return group << 2;
-}
-
-static int group_to_pend_offset(int group)
-{
- return group << 2;
-}
-
-static int s5pc100_get_start(unsigned int group)
-{
- switch (group) {
- case 0: return S5PC100_GPIO_A0_START;
- case 1: return S5PC100_GPIO_A1_START;
- case 2: return S5PC100_GPIO_B_START;
- case 3: return S5PC100_GPIO_C_START;
- case 4: return S5PC100_GPIO_D_START;
- case 5: return S5PC100_GPIO_E0_START;
- case 6: return S5PC100_GPIO_E1_START;
- case 7: return S5PC100_GPIO_F0_START;
- case 8: return S5PC100_GPIO_F1_START;
- case 9: return S5PC100_GPIO_F2_START;
- case 10: return S5PC100_GPIO_F3_START;
- case 11: return S5PC100_GPIO_G0_START;
- case 12: return S5PC100_GPIO_G1_START;
- case 13: return S5PC100_GPIO_G2_START;
- case 14: return S5PC100_GPIO_G3_START;
- case 15: return S5PC100_GPIO_I_START;
- case 16: return S5PC100_GPIO_J0_START;
- case 17: return S5PC100_GPIO_J1_START;
- case 18: return S5PC100_GPIO_J2_START;
- case 19: return S5PC100_GPIO_J3_START;
- case 20: return S5PC100_GPIO_J4_START;
- default:
- BUG();
- }
-
- return -EINVAL;
-}
-
-static int s5pc100_get_group(unsigned int irq)
-{
- irq -= S3C_IRQ_GPIO(0);
-
- switch (irq) {
- case S5PC100_GPIO_A0_START ... S5PC100_GPIO_A1_START - 1:
- return 0;
- case S5PC100_GPIO_A1_START ... S5PC100_GPIO_B_START - 1:
- return 1;
- case S5PC100_GPIO_B_START ... S5PC100_GPIO_C_START - 1:
- return 2;
- case S5PC100_GPIO_C_START ... S5PC100_GPIO_D_START - 1:
- return 3;
- case S5PC100_GPIO_D_START ... S5PC100_GPIO_E0_START - 1:
- return 4;
- case S5PC100_GPIO_E0_START ... S5PC100_GPIO_E1_START - 1:
- return 5;
- case S5PC100_GPIO_E1_START ... S5PC100_GPIO_F0_START - 1:
- return 6;
- case S5PC100_GPIO_F0_START ... S5PC100_GPIO_F1_START - 1:
- return 7;
- case S5PC100_GPIO_F1_START ... S5PC100_GPIO_F2_START - 1:
- return 8;
- case S5PC100_GPIO_F2_START ... S5PC100_GPIO_F3_START - 1:
- return 9;
- case S5PC100_GPIO_F3_START ... S5PC100_GPIO_G0_START - 1:
- return 10;
- case S5PC100_GPIO_G0_START ... S5PC100_GPIO_G1_START - 1:
- return 11;
- case S5PC100_GPIO_G1_START ... S5PC100_GPIO_G2_START - 1:
- return 12;
- case S5PC100_GPIO_G2_START ... S5PC100_GPIO_G3_START - 1:
- return 13;
- case S5PC100_GPIO_G3_START ... S5PC100_GPIO_H0_START - 1:
- return 14;
- case S5PC100_GPIO_I_START ... S5PC100_GPIO_J0_START - 1:
- return 15;
- case S5PC100_GPIO_J0_START ... S5PC100_GPIO_J1_START - 1:
- return 16;
- case S5PC100_GPIO_J1_START ... S5PC100_GPIO_J2_START - 1:
- return 17;
- case S5PC100_GPIO_J2_START ... S5PC100_GPIO_J3_START - 1:
- return 18;
- case S5PC100_GPIO_J3_START ... S5PC100_GPIO_J4_START - 1:
- return 19;
- case S5PC100_GPIO_J4_START ... S5PC100_GPIO_K0_START - 1:
- return 20;
- default:
- BUG();
- }
-
- return -EINVAL;
-}
-
-static int s5pc100_get_offset(unsigned int irq)
-{
- struct gpio_chip *chip = get_irq_data(irq);
- return irq - S3C_IRQ_GPIO(chip->base);
-}
-
-static void s5pc100_gpioint_ack(unsigned int irq)
-{
- int group, offset, pend_offset;
- unsigned int value;
-
- group = s5pc100_get_group(irq);
- offset = s5pc100_get_offset(irq);
- pend_offset = group_to_pend_offset(group);
-
- value = __raw_readl(S5P_GPIOREG(PEND_OFFSET) + pend_offset);
- value |= 1 << offset;
- __raw_writel(value, S5P_GPIOREG(PEND_OFFSET) + pend_offset);
-}
-
-static void s5pc100_gpioint_mask(unsigned int irq)
-{
- int group, offset, mask_offset;
- unsigned int value;
-
- group = s5pc100_get_group(irq);
- offset = s5pc100_get_offset(irq);
- mask_offset = group_to_mask_offset(group);
-
- value = __raw_readl(S5P_GPIOREG(MASK_OFFSET) + mask_offset);
- value |= 1 << offset;
- __raw_writel(value, S5P_GPIOREG(MASK_OFFSET) + mask_offset);
-}
-
-static void s5pc100_gpioint_unmask(unsigned int irq)
-{
- int group, offset, mask_offset;
- unsigned int value;
-
- group = s5pc100_get_group(irq);
- offset = s5pc100_get_offset(irq);
- mask_offset = group_to_mask_offset(group);
-
- value = __raw_readl(S5P_GPIOREG(MASK_OFFSET) + mask_offset);
- value &= ~(1 << offset);
- __raw_writel(value, S5P_GPIOREG(MASK_OFFSET) + mask_offset);
-}
-
-static void s5pc100_gpioint_mask_ack(unsigned int irq)
-{
- s5pc100_gpioint_mask(irq);
- s5pc100_gpioint_ack(irq);
-}
-
-static int s5pc100_gpioint_set_type(unsigned int irq, unsigned int type)
-{
- int group, offset, con_offset;
- unsigned int value;
-
- group = s5pc100_get_group(irq);
- offset = s5pc100_get_offset(irq);
- con_offset = group_to_con_offset(group);
-
- switch (type) {
- case IRQ_TYPE_NONE:
- printk(KERN_WARNING "No irq type\n");
- return -EINVAL;
- case IRQ_TYPE_EDGE_RISING:
- type = GPIOINT_EDGE_RISING;
- break;
- case IRQ_TYPE_EDGE_FALLING:
- type = GPIOINT_EDGE_FALLING;
- break;
- case IRQ_TYPE_EDGE_BOTH:
- type = GPIOINT_EDGE_BOTH;
- break;
- case IRQ_TYPE_LEVEL_HIGH:
- type = GPIOINT_LEVEL_HIGH;
- break;
- case IRQ_TYPE_LEVEL_LOW:
- type = GPIOINT_LEVEL_LOW;
- break;
- default:
- BUG();
- }
-
-
- value = __raw_readl(S5P_GPIOREG(CON_OFFSET) + con_offset);
- value &= ~(0xf << (offset * 0x4));
- value |= (type << (offset * 0x4));
- __raw_writel(value, S5P_GPIOREG(CON_OFFSET) + con_offset);
-
- return 0;
-}
-
-struct irq_chip s5pc100_gpioint = {
- .name = "GPIO",
- .ack = s5pc100_gpioint_ack,
- .mask = s5pc100_gpioint_mask,
- .mask_ack = s5pc100_gpioint_mask_ack,
- .unmask = s5pc100_gpioint_unmask,
- .set_type = s5pc100_gpioint_set_type,
-};
-
-void s5pc100_irq_gpioint_handler(unsigned int irq, struct irq_desc *desc)
-{
- int group, offset, pend_offset, mask_offset;
- int real_irq, group_end;
- unsigned int pend, mask;
-
- group_end = 21;
-
- for (group = 0; group < group_end; group++) {
- pend_offset = group_to_pend_offset(group);
- pend = __raw_readl(S5P_GPIOREG(PEND_OFFSET) + pend_offset);
- if (!pend)
- continue;
-
- mask_offset = group_to_mask_offset(group);
- mask = __raw_readl(S5P_GPIOREG(MASK_OFFSET) + mask_offset);
- pend &= ~mask;
-
- for (offset = 0; offset < 8; offset++) {
- if (pend & (1 << offset)) {
- real_irq = s5pc100_get_start(group) + offset;
- generic_handle_irq(S3C_IRQ_GPIO(real_irq));
- }
- }
- }
-}
diff --git a/arch/arm/mach-s5pc100/mach-smdkc100.c b/arch/arm/mach-s5pc100/mach-smdkc100.c
index 880fb075092..18b405d514d 100644
--- a/arch/arm/mach-s5pc100/mach-smdkc100.c
+++ b/arch/arm/mach-s5pc100/mach-smdkc100.c
@@ -47,6 +47,7 @@
#include <plat/adc.h>
#include <plat/keypad.h>
#include <plat/ts.h>
+#include <plat/audio.h>
/* Following are default values for UCON, ULCON and UFCON UART registers */
#define SMDKC100_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
@@ -196,6 +197,7 @@ static struct platform_device *smdkc100_devices[] __initdata = {
&s5p_device_fimc0,
&s5p_device_fimc1,
&s5p_device_fimc2,
+ &s5pc100_device_spdif,
};
static struct s3c2410_ts_mach_info s3c_ts_platform __initdata = {
@@ -226,6 +228,8 @@ static void __init smdkc100_machine_init(void)
samsung_keypad_set_platdata(&smdkc100_keypad_data);
+ s5pc100_spdif_setup_gpio(S5PC100_SPDIF_GPD);
+
/* LCD init */
gpio_request(S5PC100_GPD(0), "GPD");
gpio_request(S5PC100_GPH0(6), "GPH0");
diff --git a/arch/arm/mach-s5pc100/setup-fb-24bpp.c b/arch/arm/mach-s5pc100/setup-fb-24bpp.c
index 6eba6cb8e2f..d31c0f3fe22 100644
--- a/arch/arm/mach-s5pc100/setup-fb-24bpp.c
+++ b/arch/arm/mach-s5pc100/setup-fb-24bpp.c
@@ -22,27 +22,15 @@
#define DISR_OFFSET 0x7008
-void s5pc100_fb_gpio_setup_24bpp(void)
+static void s5pc100_fb_setgpios(unsigned int base, unsigned int nr)
{
- unsigned int gpio = 0;
-
- for (gpio = S5PC100_GPF0(0); gpio <= S5PC100_GPF0(7); gpio++) {
- s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
- s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
- }
-
- for (gpio = S5PC100_GPF1(0); gpio <= S5PC100_GPF1(7); gpio++) {
- s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
- s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
- }
-
- for (gpio = S5PC100_GPF2(0); gpio <= S5PC100_GPF2(7); gpio++) {
- s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
- s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
- }
+ s3c_gpio_cfgrange_nopull(base, nr, S3C_GPIO_SFN(2));
+}
- for (gpio = S5PC100_GPF3(0); gpio <= S5PC100_GPF3(3); gpio++) {
- s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
- s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
- }
+void s5pc100_fb_gpio_setup_24bpp(void)
+{
+ s5pc100_fb_setgpios(S5PC100_GPF0(0), 8);
+ s5pc100_fb_setgpios(S5PC100_GPF1(0), 8);
+ s5pc100_fb_setgpios(S5PC100_GPF2(0), 8);
+ s5pc100_fb_setgpios(S5PC100_GPF3(0), 4);
}
diff --git a/arch/arm/mach-s5pc100/setup-i2c0.c b/arch/arm/mach-s5pc100/setup-i2c0.c
index dd3174e6ecc..eaef7a3bda4 100644
--- a/arch/arm/mach-s5pc100/setup-i2c0.c
+++ b/arch/arm/mach-s5pc100/setup-i2c0.c
@@ -23,8 +23,6 @@ struct platform_device; /* don't need the contents */
void s3c_i2c0_cfg_gpio(struct platform_device *dev)
{
- s3c_gpio_cfgpin(S5PC100_GPD(3), S3C_GPIO_SFN(2));
- s3c_gpio_setpull(S5PC100_GPD(3), S3C_GPIO_PULL_UP);
- s3c_gpio_cfgpin(S5PC100_GPD(4), S3C_GPIO_SFN(2));
- s3c_gpio_setpull(S5PC100_GPD(4), S3C_GPIO_PULL_UP);
+ s3c_gpio_cfgall_range(S5PC100_GPD(3), 2,
+ S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
}
diff --git a/arch/arm/mach-s5pc100/setup-i2c1.c b/arch/arm/mach-s5pc100/setup-i2c1.c
index d1fec26b69e..aaff74a90de 100644
--- a/arch/arm/mach-s5pc100/setup-i2c1.c
+++ b/arch/arm/mach-s5pc100/setup-i2c1.c
@@ -23,8 +23,6 @@ struct platform_device; /* don't need the contents */
void s3c_i2c1_cfg_gpio(struct platform_device *dev)
{
- s3c_gpio_cfgpin(S5PC100_GPD(5), S3C_GPIO_SFN(2));
- s3c_gpio_setpull(S5PC100_GPD(5), S3C_GPIO_PULL_UP);
- s3c_gpio_cfgpin(S5PC100_GPD(6), S3C_GPIO_SFN(2));
- s3c_gpio_setpull(S5PC100_GPD(6), S3C_GPIO_PULL_UP);
+ s3c_gpio_cfgall_range(S5PC100_GPD(5), 2,
+ S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
}
diff --git a/arch/arm/mach-s5pc100/setup-ide.c b/arch/arm/mach-s5pc100/setup-ide.c
index 83575671fb5..223aae04446 100644
--- a/arch/arm/mach-s5pc100/setup-ide.c
+++ b/arch/arm/mach-s5pc100/setup-ide.c
@@ -17,52 +17,39 @@
#include <mach/regs-clock.h>
#include <plat/gpio-cfg.h>
+static void s5pc100_ide_cfg_gpios(unsigned int base, unsigned int nr)
+{
+ s3c_gpio_cfgrange_nopull(base, nr, S3C_GPIO_SFN(4));
+
+ for (; nr > 0; nr--, base++)
+ s5p_gpio_set_drvstr(base, S5P_GPIO_DRVSTR_LV4);
+}
+
void s5pc100_ide_setup_gpio(void)
{
u32 reg;
- u32 gpio = 0;
/* Independent CF interface, CF chip select configuration */
reg = readl(S5PC100_MEM_SYS_CFG) & (~0x3f);
writel(reg | MEM_SYS_CFG_EBI_FIX_PRI_CFCON, S5PC100_MEM_SYS_CFG);
/* CF_Add[0 - 2], CF_IORDY, CF_INTRQ, CF_DMARQ, CF_DMARST, CF_DMACK */
- for (gpio = S5PC100_GPJ0(0); gpio <= S5PC100_GPJ0(7); gpio++) {
- s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(4));
- s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
- s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
- }
+ s5pc100_ide_cfg_gpios(S5PC100_GPJ0(0), 8);
/*CF_Data[0 - 7] */
- for (gpio = S5PC100_GPJ2(0); gpio <= S5PC100_GPJ2(7); gpio++) {
- s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(4));
- s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
- s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
- }
+ s5pc100_ide_cfg_gpios(S5PC100_GPJ2(0), 8);
/* CF_Data[8 - 15] */
- for (gpio = S5PC100_GPJ3(0); gpio <= S5PC100_GPJ3(7); gpio++) {
- s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(4));
- s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
- s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
- }
+ s5pc100_ide_cfg_gpios(S5PC100_GPJ3(0), 8);
/* CF_CS0, CF_CS1, CF_IORD, CF_IOWR */
- for (gpio = S5PC100_GPJ4(0); gpio <= S5PC100_GPJ4(3); gpio++) {
- s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(4));
- s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
- s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
- }
+ s5pc100_ide_cfg_gpios(S5PC100_GPJ4(0), 4);
/* EBI_OE, EBI_WE */
- for (gpio = S5PC100_GPK0(6); gpio <= S5PC100_GPK0(7); gpio++)
- s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(0));
+ s3c_gpio_cfgpin_range(S5PC100_GPK0(6), 2, S3C_GPIO_SFN(0));
/* CF_OE, CF_WE */
- for (gpio = S5PC100_GPK1(6); gpio <= S5PC100_GPK1(7); gpio++) {
- s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
- s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
- }
+ s3c_gpio_cfgrange_nopull(S5PC100_GPK1(6), 8, S3C_GPIO_SFN(2));
/* CF_CD */
s3c_gpio_cfgpin(S5PC100_GPK3(5), S3C_GPIO_SFN(2));
diff --git a/arch/arm/mach-s5pc100/setup-keypad.c b/arch/arm/mach-s5pc100/setup-keypad.c
index d0837a72a58..ada377f0c20 100644
--- a/arch/arm/mach-s5pc100/setup-keypad.c
+++ b/arch/arm/mach-s5pc100/setup-keypad.c
@@ -15,20 +15,9 @@
void samsung_keypad_cfg_gpio(unsigned int rows, unsigned int cols)
{
- unsigned int gpio;
- unsigned int end;
-
/* Set all the necessary GPH3 pins to special-function 3: KP_ROW[x] */
- end = S5PC100_GPH3(rows);
- for (gpio = S5PC100_GPH3(0); gpio < end; gpio++) {
- s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(3));
- s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
- }
+ s3c_gpio_cfgrange_nopull(S5PC100_GPH3(0), rows, S3C_GPIO_SFN(3));
/* Set all the necessary GPH2 pins to special-function 3: KP_COL[x] */
- end = S5PC100_GPH2(cols);
- for (gpio = S5PC100_GPH2(0); gpio < end; gpio++) {
- s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(3));
- s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
- }
+ s3c_gpio_cfgrange_nopull(S5PC100_GPH2(0), cols, S3C_GPIO_SFN(3));
}
diff --git a/arch/arm/mach-s5pc100/setup-sdhci-gpio.c b/arch/arm/mach-s5pc100/setup-sdhci-gpio.c
index dc7208c639e..03c02d04c68 100644
--- a/arch/arm/mach-s5pc100/setup-sdhci-gpio.c
+++ b/arch/arm/mach-s5pc100/setup-sdhci-gpio.c
@@ -25,8 +25,6 @@
void s5pc100_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width)
{
struct s3c_sdhci_platdata *pdata = dev->dev.platform_data;
- unsigned int gpio;
- unsigned int end;
unsigned int num;
num = width;
@@ -34,20 +32,11 @@ void s5pc100_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width)
if (width == 8)
num = width - 2;
- end = S5PC100_GPG0(2 + num);
-
/* Set all the necessary GPG0/GPG1 pins to special-function 0 */
- for (gpio = S5PC100_GPG0(0); gpio < end; gpio++) {
- s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
- s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
- }
+ s3c_gpio_cfgrange_nopull(S5PC100_GPG0(0), 2 + num, S3C_GPIO_SFN(2));
- if (width == 8) {
- for (gpio = S5PC100_GPG1(0); gpio <= S5PC100_GPG1(1); gpio++) {
- s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
- s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
- }
- }
+ if (width == 8)
+ s3c_gpio_cfgrange_nopull(S5PC100_GPG1(0), 2, S3C_GPIO_SFN(2));
if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) {
s3c_gpio_setpull(S5PC100_GPG1(2), S3C_GPIO_PULL_UP);
@@ -58,16 +47,9 @@ void s5pc100_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width)
void s5pc100_setup_sdhci1_cfg_gpio(struct platform_device *dev, int width)
{
struct s3c_sdhci_platdata *pdata = dev->dev.platform_data;
- unsigned int gpio;
- unsigned int end;
-
- end = S5PC100_GPG2(2 + width);
/* Set all the necessary GPG2 pins to special-function 2 */
- for (gpio = S5PC100_GPG2(0); gpio < end; gpio++) {
- s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
- s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
- }
+ s3c_gpio_cfgrange_nopull(S5PC100_GPG2(0), 2 + width, S3C_GPIO_SFN(2));
if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) {
s3c_gpio_setpull(S5PC100_GPG2(6), S3C_GPIO_PULL_UP);
@@ -78,16 +60,9 @@ void s5pc100_setup_sdhci1_cfg_gpio(struct platform_device *dev, int width)
void s5pc100_setup_sdhci2_cfg_gpio(struct platform_device *dev, int width)
{
struct s3c_sdhci_platdata *pdata = dev->dev.platform_data;
- unsigned int gpio;
- unsigned int end;
-
- end = S5PC100_GPG3(2 + width);
/* Set all the necessary GPG3 pins to special-function 2 */
- for (gpio = S5PC100_GPG3(0); gpio < end; gpio++) {
- s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
- s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
- }
+ s3c_gpio_cfgrange_nopull(S5PC100_GPG3(0), 2 + width, S3C_GPIO_SFN(2));
if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) {
s3c_gpio_setpull(S5PC100_GPG3(6), S3C_GPIO_PULL_UP);
diff --git a/arch/arm/mach-s5pv210/Kconfig b/arch/arm/mach-s5pv210/Kconfig
index 5315fec3db8..862f239a0fd 100644
--- a/arch/arm/mach-s5pv210/Kconfig
+++ b/arch/arm/mach-s5pv210/Kconfig
@@ -11,9 +11,9 @@ if ARCH_S5PV210
config CPU_S5PV210
bool
- select PLAT_S5P
select S3C_PL330_DMA
select S5P_EXT_INT
+ select S5PV210_PM if PM
help
Enable S5PV210 CPU support
@@ -58,7 +58,6 @@ menu "S5PC110 Machines"
config MACH_AQUILA
bool "Aquila"
select CPU_S5PV210
- select ARCH_SPARSEMEM_ENABLE
select S3C_DEV_FB
select S5P_DEV_FIMC0
select S5P_DEV_FIMC1
@@ -75,7 +74,7 @@ config MACH_AQUILA
config MACH_GONI
bool "GONI"
select CPU_S5PV210
- select ARCH_SPARSEMEM_ENABLE
+ select S5P_GPIO_INT
select S3C_DEV_FB
select S5P_DEV_FIMC0
select S5P_DEV_FIMC1
@@ -83,8 +82,15 @@ config MACH_GONI
select S3C_DEV_HSMMC
select S3C_DEV_HSMMC1
select S3C_DEV_HSMMC2
+ select S3C_DEV_I2C1
+ select S3C_DEV_I2C2
+ select S3C_DEV_USB_HSOTG
select S5P_DEV_ONENAND
+ select SAMSUNG_DEV_KEYPAD
select S5PV210_SETUP_FB_24BPP
+ select S5PV210_SETUP_I2C1
+ select S5PV210_SETUP_I2C2
+ select S5PV210_SETUP_KEYPAD
select S5PV210_SETUP_SDHCI
help
Machine support for Samsung GONI board
@@ -93,7 +99,6 @@ config MACH_GONI
config MACH_SMDKC110
bool "SMDKC110"
select CPU_S5PV210
- select ARCH_SPARSEMEM_ENABLE
select S3C_DEV_I2C1
select S3C_DEV_I2C2
select S3C_DEV_RTC
@@ -113,7 +118,6 @@ menu "S5PV210 Machines"
config MACH_SMDKV210
bool "SMDKV210"
select CPU_S5PV210
- select ARCH_SPARSEMEM_ENABLE
select S3C_DEV_HSMMC
select S3C_DEV_HSMMC1
select S3C_DEV_HSMMC2
@@ -134,6 +138,29 @@ config MACH_SMDKV210
help
Machine support for Samsung SMDKV210
+config MACH_TORBRECK
+ bool "Torbreck"
+ select CPU_S5PV210
+ select ARCH_SPARSEMEM_ENABLE
+ select S3C_DEV_HSMMC
+ select S3C_DEV_HSMMC1
+ select S3C_DEV_HSMMC2
+ select S3C_DEV_HSMMC3
+ select S3C_DEV_I2C1
+ select S3C_DEV_I2C2
+ select S3C_DEV_RTC
+ select S3C_DEV_WDT
+ select S5PV210_SETUP_I2C1
+ select S5PV210_SETUP_I2C2
+ select S5PV210_SETUP_SDHCI
+ help
+ Machine support for aESOP Torbreck
+
endmenu
+config S5PV210_PM
+ bool
+ help
+ Power Management code common to S5PV210
+
endif
diff --git a/arch/arm/mach-s5pv210/Makefile b/arch/arm/mach-s5pv210/Makefile
index 70454891240..ff1a0db57a2 100644
--- a/arch/arm/mach-s5pv210/Makefile
+++ b/arch/arm/mach-s5pv210/Makefile
@@ -14,6 +14,8 @@ obj- :=
obj-$(CONFIG_CPU_S5PV210) += cpu.o init.o clock.o dma.o gpiolib.o
obj-$(CONFIG_CPU_S5PV210) += setup-i2c0.o
+obj-$(CONFIG_S5PV210_PM) += pm.o sleep.o
+obj-$(CONFIG_CPU_FREQ) += cpufreq.o
# machine support
@@ -21,6 +23,7 @@ obj-$(CONFIG_MACH_AQUILA) += mach-aquila.o
obj-$(CONFIG_MACH_SMDKV210) += mach-smdkv210.o
obj-$(CONFIG_MACH_SMDKC110) += mach-smdkc110.o
obj-$(CONFIG_MACH_GONI) += mach-goni.o
+obj-$(CONFIG_MACH_TORBRECK) += mach-torbreck.o
# device support
diff --git a/arch/arm/mach-s5pv210/clock.c b/arch/arm/mach-s5pv210/clock.c
index d562670e1b0..019c3a69b0e 100644
--- a/arch/arm/mach-s5pv210/clock.c
+++ b/arch/arm/mach-s5pv210/clock.c
@@ -31,6 +31,8 @@
#include <plat/clock-clksrc.h>
#include <plat/s5pv210.h>
+static unsigned long xtal;
+
static struct clksrc_clk clk_mout_apll = {
.clk = {
.name = "mout_apll",
@@ -259,6 +261,36 @@ static struct clksrc_clk clk_sclk_vpll = {
.reg_src = { .reg = S5P_CLK_SRC0, .shift = 12, .size = 1 },
};
+static struct clk *clkset_moutdmc0src_list[] = {
+ [0] = &clk_sclk_a2m.clk,
+ [1] = &clk_mout_mpll.clk,
+ [2] = NULL,
+ [3] = NULL,
+};
+
+static struct clksrc_sources clkset_moutdmc0src = {
+ .sources = clkset_moutdmc0src_list,
+ .nr_sources = ARRAY_SIZE(clkset_moutdmc0src_list),
+};
+
+static struct clksrc_clk clk_mout_dmc0 = {
+ .clk = {
+ .name = "mout_dmc0",
+ .id = -1,
+ },
+ .sources = &clkset_moutdmc0src,
+ .reg_src = { .reg = S5P_CLK_SRC6, .shift = 24, .size = 2 },
+};
+
+static struct clksrc_clk clk_sclk_dmc0 = {
+ .clk = {
+ .name = "sclk_dmc0",
+ .id = -1,
+ .parent = &clk_mout_dmc0.clk,
+ },
+ .reg_div = { .reg = S5P_CLK_DIV6, .shift = 28, .size = 4 },
+};
+
static unsigned long s5pv210_clk_imem_get_rate(struct clk *clk)
{
return clk_get_rate(clk->parent) / 2;
@@ -268,8 +300,29 @@ static struct clk_ops clk_hclk_imem_ops = {
.get_rate = s5pv210_clk_imem_get_rate,
};
+static unsigned long s5pv210_clk_fout_apll_get_rate(struct clk *clk)
+{
+ return s5p_get_pll45xx(xtal, __raw_readl(S5P_APLL_CON), pll_4508);
+}
+
+static struct clk_ops clk_fout_apll_ops = {
+ .get_rate = s5pv210_clk_fout_apll_get_rate,
+};
+
static struct clk init_clocks_disable[] = {
{
+ .name = "pdma",
+ .id = 0,
+ .parent = &clk_hclk_psys.clk,
+ .enable = s5pv210_clk_ip0_ctrl,
+ .ctrlbit = (1 << 3),
+ }, {
+ .name = "pdma",
+ .id = 1,
+ .parent = &clk_hclk_psys.clk,
+ .enable = s5pv210_clk_ip0_ctrl,
+ .ctrlbit = (1 << 4),
+ }, {
.name = "rot",
.id = -1,
.parent = &clk_hclk_dsys.clk,
@@ -431,6 +484,12 @@ static struct clk init_clocks_disable[] = {
.parent = &clk_p,
.enable = s5pv210_clk_ip3_ctrl,
.ctrlbit = (1 << 6),
+ }, {
+ .name = "spdif",
+ .id = -1,
+ .parent = &clk_p,
+ .enable = s5pv210_clk_ip3_ctrl,
+ .ctrlbit = (1 << 0),
},
};
@@ -660,6 +719,53 @@ static struct clksrc_sources clkset_sclk_spdif = {
.nr_sources = ARRAY_SIZE(clkset_sclk_spdif_list),
};
+static int s5pv210_spdif_set_rate(struct clk *clk, unsigned long rate)
+{
+ struct clk *pclk;
+ int ret;
+
+ pclk = clk_get_parent(clk);
+ if (IS_ERR(pclk))
+ return -EINVAL;
+
+ ret = pclk->ops->set_rate(pclk, rate);
+ clk_put(pclk);
+
+ return ret;
+}
+
+static unsigned long s5pv210_spdif_get_rate(struct clk *clk)
+{
+ struct clk *pclk;
+ int rate;
+
+ pclk = clk_get_parent(clk);
+ if (IS_ERR(pclk))
+ return -EINVAL;
+
+ rate = pclk->ops->get_rate(clk);
+ clk_put(pclk);
+
+ return rate;
+}
+
+static struct clk_ops s5pv210_sclk_spdif_ops = {
+ .set_rate = s5pv210_spdif_set_rate,
+ .get_rate = s5pv210_spdif_get_rate,
+};
+
+static struct clksrc_clk clk_sclk_spdif = {
+ .clk = {
+ .name = "sclk_spdif",
+ .id = -1,
+ .enable = s5pv210_clk_mask0_ctrl,
+ .ctrlbit = (1 << 27),
+ .ops = &s5pv210_sclk_spdif_ops,
+ },
+ .sources = &clkset_sclk_spdif,
+ .reg_src = { .reg = S5P_CLK_SRC6, .shift = 12, .size = 2 },
+};
+
static struct clk *clkset_group2_list[] = {
[0] = &clk_ext_xtal_mux,
[1] = &clk_xusbxti,
@@ -744,15 +850,6 @@ static struct clksrc_clk clksrcs[] = {
.sources = &clkset_sclk_mixer,
.reg_src = { .reg = S5P_CLK_SRC1, .shift = 4, .size = 1 },
}, {
- .clk = {
- .name = "sclk_spdif",
- .id = -1,
- .enable = s5pv210_clk_mask0_ctrl,
- .ctrlbit = (1 << 27),
- },
- .sources = &clkset_sclk_spdif,
- .reg_src = { .reg = S5P_CLK_SRC6, .shift = 12, .size = 2 },
- }, {
.clk = {
.name = "sclk_fimc",
.id = 0,
@@ -953,12 +1050,93 @@ static struct clksrc_clk *sysclks[] = {
&clk_sclk_dac,
&clk_sclk_pixel,
&clk_sclk_hdmi,
+ &clk_mout_dmc0,
+ &clk_sclk_dmc0,
+ &clk_sclk_audio0,
+ &clk_sclk_audio1,
+ &clk_sclk_audio2,
+ &clk_sclk_spdif,
+};
+
+static u32 epll_div[][6] = {
+ { 48000000, 0, 48, 3, 3, 0 },
+ { 96000000, 0, 48, 3, 2, 0 },
+ { 144000000, 1, 72, 3, 2, 0 },
+ { 192000000, 0, 48, 3, 1, 0 },
+ { 288000000, 1, 72, 3, 1, 0 },
+ { 32750000, 1, 65, 3, 4, 35127 },
+ { 32768000, 1, 65, 3, 4, 35127 },
+ { 45158400, 0, 45, 3, 3, 10355 },
+ { 45000000, 0, 45, 3, 3, 10355 },
+ { 45158000, 0, 45, 3, 3, 10355 },
+ { 49125000, 0, 49, 3, 3, 9961 },
+ { 49152000, 0, 49, 3, 3, 9961 },
+ { 67737600, 1, 67, 3, 3, 48366 },
+ { 67738000, 1, 67, 3, 3, 48366 },
+ { 73800000, 1, 73, 3, 3, 47710 },
+ { 73728000, 1, 73, 3, 3, 47710 },
+ { 36000000, 1, 32, 3, 4, 0 },
+ { 60000000, 1, 60, 3, 3, 0 },
+ { 72000000, 1, 72, 3, 3, 0 },
+ { 80000000, 1, 80, 3, 3, 0 },
+ { 84000000, 0, 42, 3, 2, 0 },
+ { 50000000, 0, 50, 3, 3, 0 },
+};
+
+static int s5pv210_epll_set_rate(struct clk *clk, unsigned long rate)
+{
+ unsigned int epll_con, epll_con_k;
+ unsigned int i;
+
+ /* Return if nothing changed */
+ if (clk->rate == rate)
+ return 0;
+
+ epll_con = __raw_readl(S5P_EPLL_CON);
+ epll_con_k = __raw_readl(S5P_EPLL_CON1);
+
+ epll_con_k &= ~PLL46XX_KDIV_MASK;
+ epll_con &= ~(1 << 27 |
+ PLL46XX_MDIV_MASK << PLL46XX_MDIV_SHIFT |
+ PLL46XX_PDIV_MASK << PLL46XX_PDIV_SHIFT |
+ PLL46XX_SDIV_MASK << PLL46XX_SDIV_SHIFT);
+
+ for (i = 0; i < ARRAY_SIZE(epll_div); i++) {
+ if (epll_div[i][0] == rate) {
+ epll_con_k |= epll_div[i][5] << 0;
+ epll_con |= (epll_div[i][1] << 27 |
+ epll_div[i][2] << PLL46XX_MDIV_SHIFT |
+ epll_div[i][3] << PLL46XX_PDIV_SHIFT |
+ epll_div[i][4] << PLL46XX_SDIV_SHIFT);
+ break;
+ }
+ }
+
+ if (i == ARRAY_SIZE(epll_div)) {
+ printk(KERN_ERR "%s: Invalid Clock EPLL Frequency\n",
+ __func__);
+ return -EINVAL;
+ }
+
+ __raw_writel(epll_con, S5P_EPLL_CON);
+ __raw_writel(epll_con_k, S5P_EPLL_CON1);
+
+ printk(KERN_WARNING "EPLL Rate changes from %lu to %lu\n",
+ clk->rate, rate);
+
+ clk->rate = rate;
+
+ return 0;
+}
+
+static struct clk_ops s5pv210_epll_ops = {
+ .set_rate = s5pv210_epll_set_rate,
+ .get_rate = s5p_epll_get_rate,
};
void __init_or_cpufreq s5pv210_setup_clocks(void)
{
struct clk *xtal_clk;
- unsigned long xtal;
unsigned long vpllsrc;
unsigned long armclk;
unsigned long hclk_msys;
@@ -974,6 +1152,10 @@ void __init_or_cpufreq s5pv210_setup_clocks(void)
unsigned int ptr;
u32 clkdiv0, clkdiv1;
+ /* Set functions for clk_fout_epll */
+ clk_fout_epll.enable = s5p_epll_enable;
+ clk_fout_epll.ops = &s5pv210_epll_ops;
+
printk(KERN_DEBUG "%s: registering clocks\n", __func__);
clkdiv0 = __raw_readl(S5P_CLK_DIV0);
@@ -992,11 +1174,12 @@ void __init_or_cpufreq s5pv210_setup_clocks(void)
apll = s5p_get_pll45xx(xtal, __raw_readl(S5P_APLL_CON), pll_4508);
mpll = s5p_get_pll45xx(xtal, __raw_readl(S5P_MPLL_CON), pll_4502);
- epll = s5p_get_pll45xx(xtal, __raw_readl(S5P_EPLL_CON), pll_4500);
+ epll = s5p_get_pll46xx(xtal, __raw_readl(S5P_EPLL_CON),
+ __raw_readl(S5P_EPLL_CON1), pll_4600);
vpllsrc = clk_get_rate(&clk_vpllsrc.clk);
vpll = s5p_get_pll45xx(vpllsrc, __raw_readl(S5P_VPLL_CON), pll_4502);
- clk_fout_apll.rate = apll;
+ clk_fout_apll.ops = &clk_fout_apll_ops;
clk_fout_mpll.rate = mpll;
clk_fout_epll.rate = epll;
clk_fout_vpll.rate = vpll;
diff --git a/arch/arm/mach-s5pv210/cpu.c b/arch/arm/mach-s5pv210/cpu.c
index 2f16bfc0a11..8eb480e201b 100644
--- a/arch/arm/mach-s5pv210/cpu.c
+++ b/arch/arm/mach-s5pv210/cpu.c
@@ -85,6 +85,21 @@ static struct map_desc s5pv210_iodesc[] __initdata = {
.pfn = __phys_to_pfn(S5PV210_PA_SROMC),
.length = SZ_4K,
.type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S5P_VA_DMC0,
+ .pfn = __phys_to_pfn(S5PV210_PA_DMC0),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S5P_VA_DMC1,
+ .pfn = __phys_to_pfn(S5PV210_PA_DMC1),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S3C_VA_USB_HSPHY,
+ .pfn =__phys_to_pfn(S5PV210_PA_HSPHY),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
}
};
diff --git a/arch/arm/mach-s5pv210/cpufreq.c b/arch/arm/mach-s5pv210/cpufreq.c
new file mode 100644
index 00000000000..a6f22920a2c
--- /dev/null
+++ b/arch/arm/mach-s5pv210/cpufreq.c
@@ -0,0 +1,484 @@
+/* linux/arch/arm/mach-s5pv210/cpufreq.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * CPU frequency scaling for S5PC110/S5PV210
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/cpufreq.h>
+
+#include <mach/map.h>
+#include <mach/regs-clock.h>
+
+static struct clk *cpu_clk;
+static struct clk *dmc0_clk;
+static struct clk *dmc1_clk;
+static struct cpufreq_freqs freqs;
+
+/* APLL M,P,S values for 1G/800Mhz */
+#define APLL_VAL_1000 ((1 << 31) | (125 << 16) | (3 << 8) | 1)
+#define APLL_VAL_800 ((1 << 31) | (100 << 16) | (3 << 8) | 1)
+
+/*
+ * DRAM configurations to calculate refresh counter for changing
+ * frequency of memory.
+ */
+struct dram_conf {
+ unsigned long freq; /* HZ */
+ unsigned long refresh; /* DRAM refresh counter * 1000 */
+};
+
+/* DRAM configuration (DMC0 and DMC1) */
+static struct dram_conf s5pv210_dram_conf[2];
+
+enum perf_level {
+ L0, L1, L2, L3, L4,
+};
+
+enum s5pv210_mem_type {
+ LPDDR = 0x1,
+ LPDDR2 = 0x2,
+ DDR2 = 0x4,
+};
+
+enum s5pv210_dmc_port {
+ DMC0 = 0,
+ DMC1,
+};
+
+static struct cpufreq_frequency_table s5pv210_freq_table[] = {
+ {L0, 1000*1000},
+ {L1, 800*1000},
+ {L2, 400*1000},
+ {L3, 200*1000},
+ {L4, 100*1000},
+ {0, CPUFREQ_TABLE_END},
+};
+
+static u32 clkdiv_val[5][11] = {
+ /*
+ * Clock divider value for following
+ * { APLL, A2M, HCLK_MSYS, PCLK_MSYS,
+ * HCLK_DSYS, PCLK_DSYS, HCLK_PSYS, PCLK_PSYS,
+ * ONEDRAM, MFC, G3D }
+ */
+
+ /* L0 : [1000/200/100][166/83][133/66][200/200] */
+ {0, 4, 4, 1, 3, 1, 4, 1, 3, 0, 0},
+
+ /* L1 : [800/200/100][166/83][133/66][200/200] */
+ {0, 3, 3, 1, 3, 1, 4, 1, 3, 0, 0},
+
+ /* L2 : [400/200/100][166/83][133/66][200/200] */
+ {1, 3, 1, 1, 3, 1, 4, 1, 3, 0, 0},
+
+ /* L3 : [200/200/100][166/83][133/66][200/200] */
+ {3, 3, 1, 1, 3, 1, 4, 1, 3, 0, 0},
+
+ /* L4 : [100/100/100][83/83][66/66][100/100] */
+ {7, 7, 0, 0, 7, 0, 9, 0, 7, 0, 0},
+};
+
+/*
+ * This function set DRAM refresh counter
+ * accoriding to operating frequency of DRAM
+ * ch: DMC port number 0 or 1
+ * freq: Operating frequency of DRAM(KHz)
+ */
+static void s5pv210_set_refresh(enum s5pv210_dmc_port ch, unsigned long freq)
+{
+ unsigned long tmp, tmp1;
+ void __iomem *reg = NULL;
+
+ if (ch == DMC0)
+ reg = (S5P_VA_DMC0 + 0x30);
+ else if (ch == DMC1)
+ reg = (S5P_VA_DMC1 + 0x30);
+ else
+ printk(KERN_ERR "Cannot find DMC port\n");
+
+ /* Find current DRAM frequency */
+ tmp = s5pv210_dram_conf[ch].freq;
+
+ do_div(tmp, freq);
+
+ tmp1 = s5pv210_dram_conf[ch].refresh;
+
+ do_div(tmp1, tmp);
+
+ __raw_writel(tmp1, reg);
+}
+
+int s5pv210_verify_speed(struct cpufreq_policy *policy)
+{
+ if (policy->cpu)
+ return -EINVAL;
+
+ return cpufreq_frequency_table_verify(policy, s5pv210_freq_table);
+}
+
+unsigned int s5pv210_getspeed(unsigned int cpu)
+{
+ if (cpu)
+ return 0;
+
+ return clk_get_rate(cpu_clk) / 1000;
+}
+
+static int s5pv210_target(struct cpufreq_policy *policy,
+ unsigned int target_freq,
+ unsigned int relation)
+{
+ unsigned long reg;
+ unsigned int index, priv_index;
+ unsigned int pll_changing = 0;
+ unsigned int bus_speed_changing = 0;
+
+ freqs.old = s5pv210_getspeed(0);
+
+ if (cpufreq_frequency_table_target(policy, s5pv210_freq_table,
+ target_freq, relation, &index))
+ return -EINVAL;
+
+ freqs.new = s5pv210_freq_table[index].frequency;
+ freqs.cpu = 0;
+
+ if (freqs.new == freqs.old)
+ return 0;
+
+ /* Finding current running level index */
+ if (cpufreq_frequency_table_target(policy, s5pv210_freq_table,
+ freqs.old, relation, &priv_index))
+ return -EINVAL;
+
+ cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
+
+ if (freqs.new > freqs.old) {
+ /* Voltage up: will be implemented */
+ }
+
+ /* Check if there need to change PLL */
+ if ((index == L0) || (priv_index == L0))
+ pll_changing = 1;
+
+ /* Check if there need to change System bus clock */
+ if ((index == L4) || (priv_index == L4))
+ bus_speed_changing = 1;
+
+ if (bus_speed_changing) {
+ /*
+ * Reconfigure DRAM refresh counter value for minimum
+ * temporary clock while changing divider.
+ * expected clock is 83Mhz : 7.8usec/(1/83Mhz) = 0x287
+ */
+ if (pll_changing)
+ s5pv210_set_refresh(DMC1, 83000);
+ else
+ s5pv210_set_refresh(DMC1, 100000);
+
+ s5pv210_set_refresh(DMC0, 83000);
+ }
+
+ /*
+ * APLL should be changed in this level
+ * APLL -> MPLL(for stable transition) -> APLL
+ * Some clock source's clock API are not prepared.
+ * Do not use clock API in below code.
+ */
+ if (pll_changing) {
+ /*
+ * 1. Temporary Change divider for MFC and G3D
+ * SCLKA2M(200/1=200)->(200/4=50)Mhz
+ */
+ reg = __raw_readl(S5P_CLK_DIV2);
+ reg &= ~(S5P_CLKDIV2_G3D_MASK | S5P_CLKDIV2_MFC_MASK);
+ reg |= (3 << S5P_CLKDIV2_G3D_SHIFT) |
+ (3 << S5P_CLKDIV2_MFC_SHIFT);
+ __raw_writel(reg, S5P_CLK_DIV2);
+
+ /* For MFC, G3D dividing */
+ do {
+ reg = __raw_readl(S5P_CLKDIV_STAT0);
+ } while (reg & ((1 << 16) | (1 << 17)));
+
+ /*
+ * 2. Change SCLKA2M(200Mhz)to SCLKMPLL in MFC_MUX, G3D MUX
+ * (200/4=50)->(667/4=166)Mhz
+ */
+ reg = __raw_readl(S5P_CLK_SRC2);
+ reg &= ~(S5P_CLKSRC2_G3D_MASK | S5P_CLKSRC2_MFC_MASK);
+ reg |= (1 << S5P_CLKSRC2_G3D_SHIFT) |
+ (1 << S5P_CLKSRC2_MFC_SHIFT);
+ __raw_writel(reg, S5P_CLK_SRC2);
+
+ do {
+ reg = __raw_readl(S5P_CLKMUX_STAT1);
+ } while (reg & ((1 << 7) | (1 << 3)));
+
+ /*
+ * 3. DMC1 refresh count for 133Mhz if (index == L4) is
+ * true refresh counter is already programed in upper
+ * code. 0x287@83Mhz
+ */
+ if (!bus_speed_changing)
+ s5pv210_set_refresh(DMC1, 133000);
+
+ /* 4. SCLKAPLL -> SCLKMPLL */
+ reg = __raw_readl(S5P_CLK_SRC0);
+ reg &= ~(S5P_CLKSRC0_MUX200_MASK);
+ reg |= (0x1 << S5P_CLKSRC0_MUX200_SHIFT);
+ __raw_writel(reg, S5P_CLK_SRC0);
+
+ do {
+ reg = __raw_readl(S5P_CLKMUX_STAT0);
+ } while (reg & (0x1 << 18));
+
+ }
+
+ /* Change divider */
+ reg = __raw_readl(S5P_CLK_DIV0);
+
+ reg &= ~(S5P_CLKDIV0_APLL_MASK | S5P_CLKDIV0_A2M_MASK |
+ S5P_CLKDIV0_HCLK200_MASK | S5P_CLKDIV0_PCLK100_MASK |
+ S5P_CLKDIV0_HCLK166_MASK | S5P_CLKDIV0_PCLK83_MASK |
+ S5P_CLKDIV0_HCLK133_MASK | S5P_CLKDIV0_PCLK66_MASK);
+
+ reg |= ((clkdiv_val[index][0] << S5P_CLKDIV0_APLL_SHIFT) |
+ (clkdiv_val[index][1] << S5P_CLKDIV0_A2M_SHIFT) |
+ (clkdiv_val[index][2] << S5P_CLKDIV0_HCLK200_SHIFT) |
+ (clkdiv_val[index][3] << S5P_CLKDIV0_PCLK100_SHIFT) |
+ (clkdiv_val[index][4] << S5P_CLKDIV0_HCLK166_SHIFT) |
+ (clkdiv_val[index][5] << S5P_CLKDIV0_PCLK83_SHIFT) |
+ (clkdiv_val[index][6] << S5P_CLKDIV0_HCLK133_SHIFT) |
+ (clkdiv_val[index][7] << S5P_CLKDIV0_PCLK66_SHIFT));
+
+ __raw_writel(reg, S5P_CLK_DIV0);
+
+ do {
+ reg = __raw_readl(S5P_CLKDIV_STAT0);
+ } while (reg & 0xff);
+
+ /* ARM MCS value changed */
+ reg = __raw_readl(S5P_ARM_MCS_CON);
+ reg &= ~0x3;
+ if (index >= L3)
+ reg |= 0x3;
+ else
+ reg |= 0x1;
+
+ __raw_writel(reg, S5P_ARM_MCS_CON);
+
+ if (pll_changing) {
+ /* 5. Set Lock time = 30us*24Mhz = 0x2cf */
+ __raw_writel(0x2cf, S5P_APLL_LOCK);
+
+ /*
+ * 6. Turn on APLL
+ * 6-1. Set PMS values
+ * 6-2. Wait untile the PLL is locked
+ */
+ if (index == L0)
+ __raw_writel(APLL_VAL_1000, S5P_APLL_CON);
+ else
+ __raw_writel(APLL_VAL_800, S5P_APLL_CON);
+
+ do {
+ reg = __raw_readl(S5P_APLL_CON);
+ } while (!(reg & (0x1 << 29)));
+
+ /*
+ * 7. Change souce clock from SCLKMPLL(667Mhz)
+ * to SCLKA2M(200Mhz) in MFC_MUX and G3D MUX
+ * (667/4=166)->(200/4=50)Mhz
+ */
+ reg = __raw_readl(S5P_CLK_SRC2);
+ reg &= ~(S5P_CLKSRC2_G3D_MASK | S5P_CLKSRC2_MFC_MASK);
+ reg |= (0 << S5P_CLKSRC2_G3D_SHIFT) |
+ (0 << S5P_CLKSRC2_MFC_SHIFT);
+ __raw_writel(reg, S5P_CLK_SRC2);
+
+ do {
+ reg = __raw_readl(S5P_CLKMUX_STAT1);
+ } while (reg & ((1 << 7) | (1 << 3)));
+
+ /*
+ * 8. Change divider for MFC and G3D
+ * (200/4=50)->(200/1=200)Mhz
+ */
+ reg = __raw_readl(S5P_CLK_DIV2);
+ reg &= ~(S5P_CLKDIV2_G3D_MASK | S5P_CLKDIV2_MFC_MASK);
+ reg |= (clkdiv_val[index][10] << S5P_CLKDIV2_G3D_SHIFT) |
+ (clkdiv_val[index][9] << S5P_CLKDIV2_MFC_SHIFT);
+ __raw_writel(reg, S5P_CLK_DIV2);
+
+ /* For MFC, G3D dividing */
+ do {
+ reg = __raw_readl(S5P_CLKDIV_STAT0);
+ } while (reg & ((1 << 16) | (1 << 17)));
+
+ /* 9. Change MPLL to APLL in MSYS_MUX */
+ reg = __raw_readl(S5P_CLK_SRC0);
+ reg &= ~(S5P_CLKSRC0_MUX200_MASK);
+ reg |= (0x0 << S5P_CLKSRC0_MUX200_SHIFT);
+ __raw_writel(reg, S5P_CLK_SRC0);
+
+ do {
+ reg = __raw_readl(S5P_CLKMUX_STAT0);
+ } while (reg & (0x1 << 18));
+
+ /*
+ * 10. DMC1 refresh counter
+ * L4 : DMC1 = 100Mhz 7.8us/(1/100) = 0x30c
+ * Others : DMC1 = 200Mhz 7.8us/(1/200) = 0x618
+ */
+ if (!bus_speed_changing)
+ s5pv210_set_refresh(DMC1, 200000);
+ }
+
+ /*
+ * L4 level need to change memory bus speed, hence onedram clock divier
+ * and memory refresh parameter should be changed
+ */
+ if (bus_speed_changing) {
+ reg = __raw_readl(S5P_CLK_DIV6);
+ reg &= ~S5P_CLKDIV6_ONEDRAM_MASK;
+ reg |= (clkdiv_val[index][8] << S5P_CLKDIV6_ONEDRAM_SHIFT);
+ __raw_writel(reg, S5P_CLK_DIV6);
+
+ do {
+ reg = __raw_readl(S5P_CLKDIV_STAT1);
+ } while (reg & (1 << 15));
+
+ /* Reconfigure DRAM refresh counter value */
+ if (index != L4) {
+ /*
+ * DMC0 : 166Mhz
+ * DMC1 : 200Mhz
+ */
+ s5pv210_set_refresh(DMC0, 166000);
+ s5pv210_set_refresh(DMC1, 200000);
+ } else {
+ /*
+ * DMC0 : 83Mhz
+ * DMC1 : 100Mhz
+ */
+ s5pv210_set_refresh(DMC0, 83000);
+ s5pv210_set_refresh(DMC1, 100000);
+ }
+ }
+
+ if (freqs.new < freqs.old) {
+ /* Voltage down: will be implemented */
+ }
+
+ cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
+
+ printk(KERN_DEBUG "Perf changed[L%d]\n", index);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int s5pv210_cpufreq_suspend(struct cpufreq_policy *policy,
+ pm_message_t pmsg)
+{
+ return 0;
+}
+
+static int s5pv210_cpufreq_resume(struct cpufreq_policy *policy)
+{
+ return 0;
+}
+#endif
+
+static int check_mem_type(void __iomem *dmc_reg)
+{
+ unsigned long val;
+
+ val = __raw_readl(dmc_reg + 0x4);
+ val = (val & (0xf << 8));
+
+ return val >> 8;
+}
+
+static int __init s5pv210_cpu_init(struct cpufreq_policy *policy)
+{
+ unsigned long mem_type;
+
+ cpu_clk = clk_get(NULL, "armclk");
+ if (IS_ERR(cpu_clk))
+ return PTR_ERR(cpu_clk);
+
+ dmc0_clk = clk_get(NULL, "sclk_dmc0");
+ if (IS_ERR(dmc0_clk)) {
+ clk_put(cpu_clk);
+ return PTR_ERR(dmc0_clk);
+ }
+
+ dmc1_clk = clk_get(NULL, "hclk_msys");
+ if (IS_ERR(dmc1_clk)) {
+ clk_put(dmc0_clk);
+ clk_put(cpu_clk);
+ return PTR_ERR(dmc1_clk);
+ }
+
+ if (policy->cpu != 0)
+ return -EINVAL;
+
+ /*
+ * check_mem_type : This driver only support LPDDR & LPDDR2.
+ * other memory type is not supported.
+ */
+ mem_type = check_mem_type(S5P_VA_DMC0);
+
+ if ((mem_type != LPDDR) && (mem_type != LPDDR2)) {
+ printk(KERN_ERR "CPUFreq doesn't support this memory type\n");
+ return -EINVAL;
+ }
+
+ /* Find current refresh counter and frequency each DMC */
+ s5pv210_dram_conf[0].refresh = (__raw_readl(S5P_VA_DMC0 + 0x30) * 1000);
+ s5pv210_dram_conf[0].freq = clk_get_rate(dmc0_clk);
+
+ s5pv210_dram_conf[1].refresh = (__raw_readl(S5P_VA_DMC1 + 0x30) * 1000);
+ s5pv210_dram_conf[1].freq = clk_get_rate(dmc1_clk);
+
+ policy->cur = policy->min = policy->max = s5pv210_getspeed(0);
+
+ cpufreq_frequency_table_get_attr(s5pv210_freq_table, policy->cpu);
+
+ policy->cpuinfo.transition_latency = 40000;
+
+ return cpufreq_frequency_table_cpuinfo(policy, s5pv210_freq_table);
+}
+
+static struct cpufreq_driver s5pv210_driver = {
+ .flags = CPUFREQ_STICKY,
+ .verify = s5pv210_verify_speed,
+ .target = s5pv210_target,
+ .get = s5pv210_getspeed,
+ .init = s5pv210_cpu_init,
+ .name = "s5pv210",
+#ifdef CONFIG_PM
+ .suspend = s5pv210_cpufreq_suspend,
+ .resume = s5pv210_cpufreq_resume,
+#endif
+};
+
+static int __init s5pv210_cpufreq_init(void)
+{
+ return cpufreq_register_driver(&s5pv210_driver);
+}
+
+late_initcall(s5pv210_cpufreq_init);
diff --git a/arch/arm/mach-s5pv210/dev-audio.c b/arch/arm/mach-s5pv210/dev-audio.c
index 21dc6cf955c..1303fcb12b5 100644
--- a/arch/arm/mach-s5pv210/dev-audio.c
+++ b/arch/arm/mach-s5pv210/dev-audio.c
@@ -24,29 +24,15 @@ static int s5pv210_cfg_i2s(struct platform_device *pdev)
/* configure GPIO for i2s port */
switch (pdev->id) {
case 1:
- s3c_gpio_cfgpin(S5PV210_GPC0(0), S3C_GPIO_SFN(2));
- s3c_gpio_cfgpin(S5PV210_GPC0(1), S3C_GPIO_SFN(2));
- s3c_gpio_cfgpin(S5PV210_GPC0(2), S3C_GPIO_SFN(2));
- s3c_gpio_cfgpin(S5PV210_GPC0(3), S3C_GPIO_SFN(2));
- s3c_gpio_cfgpin(S5PV210_GPC0(4), S3C_GPIO_SFN(2));
+ s3c_gpio_cfgpin_range(S5PV210_GPC0(0), 5, S3C_GPIO_SFN(2));
break;
case 2:
- s3c_gpio_cfgpin(S5PV210_GPC1(0), S3C_GPIO_SFN(4));
- s3c_gpio_cfgpin(S5PV210_GPC1(1), S3C_GPIO_SFN(4));
- s3c_gpio_cfgpin(S5PV210_GPC1(2), S3C_GPIO_SFN(4));
- s3c_gpio_cfgpin(S5PV210_GPC1(3), S3C_GPIO_SFN(4));
- s3c_gpio_cfgpin(S5PV210_GPC1(4), S3C_GPIO_SFN(4));
+ s3c_gpio_cfgpin_range(S5PV210_GPC1(0), 5, S3C_GPIO_SFN(4));
break;
case -1:
- s3c_gpio_cfgpin(S5PV210_GPI(0), S3C_GPIO_SFN(2));
- s3c_gpio_cfgpin(S5PV210_GPI(1), S3C_GPIO_SFN(2));
- s3c_gpio_cfgpin(S5PV210_GPI(2), S3C_GPIO_SFN(2));
- s3c_gpio_cfgpin(S5PV210_GPI(3), S3C_GPIO_SFN(2));
- s3c_gpio_cfgpin(S5PV210_GPI(4), S3C_GPIO_SFN(2));
- s3c_gpio_cfgpin(S5PV210_GPI(5), S3C_GPIO_SFN(2));
- s3c_gpio_cfgpin(S5PV210_GPI(6), S3C_GPIO_SFN(2));
+ s3c_gpio_cfgpin_range(S5PV210_GPI(0), 7, S3C_GPIO_SFN(2));
break;
default:
@@ -151,25 +137,13 @@ static int s5pv210_pcm_cfg_gpio(struct platform_device *pdev)
{
switch (pdev->id) {
case 0:
- s3c_gpio_cfgpin(S5PV210_GPI(0), S3C_GPIO_SFN(3));
- s3c_gpio_cfgpin(S5PV210_GPI(1), S3C_GPIO_SFN(3));
- s3c_gpio_cfgpin(S5PV210_GPI(2), S3C_GPIO_SFN(3));
- s3c_gpio_cfgpin(S5PV210_GPI(3), S3C_GPIO_SFN(3));
- s3c_gpio_cfgpin(S5PV210_GPI(4), S3C_GPIO_SFN(3));
+ s3c_gpio_cfgpin_range(S5PV210_GPI(0), 5, S3C_GPIO_SFN(3));
break;
case 1:
- s3c_gpio_cfgpin(S5PV210_GPC0(0), S3C_GPIO_SFN(3));
- s3c_gpio_cfgpin(S5PV210_GPC0(1), S3C_GPIO_SFN(3));
- s3c_gpio_cfgpin(S5PV210_GPC0(2), S3C_GPIO_SFN(3));
- s3c_gpio_cfgpin(S5PV210_GPC0(3), S3C_GPIO_SFN(3));
- s3c_gpio_cfgpin(S5PV210_GPC0(4), S3C_GPIO_SFN(3));
+ s3c_gpio_cfgpin_range(S5PV210_GPC0(0), 5, S3C_GPIO_SFN(3));
break;
case 2:
- s3c_gpio_cfgpin(S5PV210_GPC1(0), S3C_GPIO_SFN(2));
- s3c_gpio_cfgpin(S5PV210_GPC1(1), S3C_GPIO_SFN(2));
- s3c_gpio_cfgpin(S5PV210_GPC1(2), S3C_GPIO_SFN(2));
- s3c_gpio_cfgpin(S5PV210_GPC1(3), S3C_GPIO_SFN(2));
- s3c_gpio_cfgpin(S5PV210_GPC1(4), S3C_GPIO_SFN(2));
+ s3c_gpio_cfgpin_range(S5PV210_GPC1(0), 5, S3C_GPIO_SFN(2));
break;
default:
printk(KERN_DEBUG "Invalid PCM Controller number!");
@@ -271,13 +245,7 @@ struct platform_device s5pv210_device_pcm2 = {
static int s5pv210_ac97_cfg_gpio(struct platform_device *pdev)
{
- s3c_gpio_cfgpin(S5PV210_GPC0(0), S3C_GPIO_SFN(4));
- s3c_gpio_cfgpin(S5PV210_GPC0(1), S3C_GPIO_SFN(4));
- s3c_gpio_cfgpin(S5PV210_GPC0(2), S3C_GPIO_SFN(4));
- s3c_gpio_cfgpin(S5PV210_GPC0(3), S3C_GPIO_SFN(4));
- s3c_gpio_cfgpin(S5PV210_GPC0(4), S3C_GPIO_SFN(4));
-
- return 0;
+ return s3c_gpio_cfgpin_range(S5PV210_GPC0(0), 5, S3C_GPIO_SFN(4));
}
static struct resource s5pv210_ac97_resource[] = {
@@ -325,3 +293,43 @@ struct platform_device s5pv210_device_ac97 = {
.coherent_dma_mask = DMA_BIT_MASK(32),
},
};
+
+/* S/PDIF Controller platform_device */
+
+static int s5pv210_spdif_cfg_gpio(struct platform_device *pdev)
+{
+ s3c_gpio_cfgpin_range(S5PV210_GPC1(0), 2, S3C_GPIO_SFN(3));
+
+ return 0;
+}
+
+static struct resource s5pv210_spdif_resource[] = {
+ [0] = {
+ .start = S5PV210_PA_SPDIF,
+ .end = S5PV210_PA_SPDIF + 0x100 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = DMACH_SPDIF,
+ .end = DMACH_SPDIF,
+ .flags = IORESOURCE_DMA,
+ },
+};
+
+static struct s3c_audio_pdata samsung_spdif_pdata = {
+ .cfg_gpio = s5pv210_spdif_cfg_gpio,
+};
+
+static u64 s5pv210_spdif_dmamask = DMA_BIT_MASK(32);
+
+struct platform_device s5pv210_device_spdif = {
+ .name = "samsung-spdif",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(s5pv210_spdif_resource),
+ .resource = s5pv210_spdif_resource,
+ .dev = {
+ .platform_data = &samsung_spdif_pdata,
+ .dma_mask = &s5pv210_spdif_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+};
diff --git a/arch/arm/mach-s5pv210/dev-spi.c b/arch/arm/mach-s5pv210/dev-spi.c
index 826cdbc43e2..e3249a47e3b 100644
--- a/arch/arm/mach-s5pv210/dev-spi.c
+++ b/arch/arm/mach-s5pv210/dev-spi.c
@@ -35,23 +35,15 @@ static char *spi_src_clks[] = {
*/
static int s5pv210_spi_cfg_gpio(struct platform_device *pdev)
{
+ unsigned int base;
+
switch (pdev->id) {
case 0:
- s3c_gpio_cfgpin(S5PV210_GPB(0), S3C_GPIO_SFN(2));
- s3c_gpio_cfgpin(S5PV210_GPB(1), S3C_GPIO_SFN(2));
- s3c_gpio_cfgpin(S5PV210_GPB(2), S3C_GPIO_SFN(2));
- s3c_gpio_setpull(S5PV210_GPB(0), S3C_GPIO_PULL_UP);
- s3c_gpio_setpull(S5PV210_GPB(1), S3C_GPIO_PULL_UP);
- s3c_gpio_setpull(S5PV210_GPB(2), S3C_GPIO_PULL_UP);
+ base = S5PV210_GPB(0);
break;
case 1:
- s3c_gpio_cfgpin(S5PV210_GPB(4), S3C_GPIO_SFN(2));
- s3c_gpio_cfgpin(S5PV210_GPB(5), S3C_GPIO_SFN(2));
- s3c_gpio_cfgpin(S5PV210_GPB(6), S3C_GPIO_SFN(2));
- s3c_gpio_setpull(S5PV210_GPB(4), S3C_GPIO_PULL_UP);
- s3c_gpio_setpull(S5PV210_GPB(5), S3C_GPIO_PULL_UP);
- s3c_gpio_setpull(S5PV210_GPB(6), S3C_GPIO_PULL_UP);
+ base = S5PV210_GPB(4);
break;
default:
@@ -59,6 +51,9 @@ static int s5pv210_spi_cfg_gpio(struct platform_device *pdev)
return -EINVAL;
}
+ s3c_gpio_cfgall_range(base, 3,
+ S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
+
return 0;
}
diff --git a/arch/arm/mach-s5pv210/dma.c b/arch/arm/mach-s5pv210/dma.c
index 778ad5fe231..497d3439a14 100644
--- a/arch/arm/mach-s5pv210/dma.c
+++ b/arch/arm/mach-s5pv210/dma.c
@@ -82,7 +82,7 @@ static struct s3c_pl330_platdata s5pv210_pdma0_pdata = {
static struct platform_device s5pv210_device_pdma0 = {
.name = "s3c-pl330",
- .id = 1,
+ .id = 0,
.num_resources = ARRAY_SIZE(s5pv210_pdma0_resource),
.resource = s5pv210_pdma0_resource,
.dev = {
@@ -144,7 +144,7 @@ static struct s3c_pl330_platdata s5pv210_pdma1_pdata = {
static struct platform_device s5pv210_device_pdma1 = {
.name = "s3c-pl330",
- .id = 2,
+ .id = 1,
.num_resources = ARRAY_SIZE(s5pv210_pdma1_resource),
.resource = s5pv210_pdma1_resource,
.dev = {
diff --git a/arch/arm/mach-s5pv210/gpiolib.c b/arch/arm/mach-s5pv210/gpiolib.c
index 0d459112d03..ab673effd76 100644
--- a/arch/arm/mach-s5pv210/gpiolib.c
+++ b/arch/arm/mach-s5pv210/gpiolib.c
@@ -150,6 +150,7 @@ static struct s3c_gpio_chip s5pv210_gpio_4bit[] = {
.label = "GPG3",
},
}, {
+ .config = &gpio_cfg_noint,
.chip = {
.base = S5PV210_GPI(0),
.ngpio = S5PV210_GPIO_I_NR,
@@ -223,34 +224,42 @@ static struct s3c_gpio_chip s5pv210_gpio_4bit[] = {
}, {
.base = (S5P_VA_GPIO + 0xC00),
.config = &gpio_cfg_noint,
+ .irq_base = IRQ_EINT(0),
.chip = {
.base = S5PV210_GPH0(0),
.ngpio = S5PV210_GPIO_H0_NR,
.label = "GPH0",
+ .to_irq = samsung_gpiolib_to_irq,
},
}, {
.base = (S5P_VA_GPIO + 0xC20),
.config = &gpio_cfg_noint,
+ .irq_base = IRQ_EINT(8),
.chip = {
.base = S5PV210_GPH1(0),
.ngpio = S5PV210_GPIO_H1_NR,
.label = "GPH1",
+ .to_irq = samsung_gpiolib_to_irq,
},
}, {
.base = (S5P_VA_GPIO + 0xC40),
.config = &gpio_cfg_noint,
+ .irq_base = IRQ_EINT(16),
.chip = {
.base = S5PV210_GPH2(0),
.ngpio = S5PV210_GPIO_H2_NR,
.label = "GPH2",
+ .to_irq = samsung_gpiolib_to_irq,
},
}, {
.base = (S5P_VA_GPIO + 0xC60),
.config = &gpio_cfg_noint,
+ .irq_base = IRQ_EINT(24),
.chip = {
.base = S5PV210_GPH3(0),
.ngpio = S5PV210_GPIO_H3_NR,
.label = "GPH3",
+ .to_irq = samsung_gpiolib_to_irq,
},
},
};
@@ -259,11 +268,14 @@ static __init int s5pv210_gpiolib_init(void)
{
struct s3c_gpio_chip *chip = s5pv210_gpio_4bit;
int nr_chips = ARRAY_SIZE(s5pv210_gpio_4bit);
+ int gpioint_group = 0;
int i = 0;
for (i = 0; i < nr_chips; i++, chip++) {
- if (chip->config == NULL)
+ if (chip->config == NULL) {
chip->config = &gpio_cfg;
+ chip->group = gpioint_group++;
+ }
if (chip->base == NULL)
chip->base = S5PV210_BANK_BASE(i);
}
diff --git a/arch/arm/mach-s5pv210/include/mach/irqs.h b/arch/arm/mach-s5pv210/include/mach/irqs.h
index e1c020e5a49..119b95fdc3c 100644
--- a/arch/arm/mach-s5pv210/include/mach/irqs.h
+++ b/arch/arm/mach-s5pv210/include/mach/irqs.h
@@ -55,8 +55,8 @@
#define IRQ_SPI1 S5P_IRQ_VIC1(16)
#define IRQ_SPI2 S5P_IRQ_VIC1(17)
#define IRQ_IRDA S5P_IRQ_VIC1(18)
-#define IRQ_CAN0 S5P_IRQ_VIC1(19)
-#define IRQ_CAN1 S5P_IRQ_VIC1(20)
+#define IRQ_IIC2 S5P_IRQ_VIC1(19)
+#define IRQ_IIC3 S5P_IRQ_VIC1(20)
#define IRQ_HSIRX S5P_IRQ_VIC1(21)
#define IRQ_HSITX S5P_IRQ_VIC1(22)
#define IRQ_UHOST S5P_IRQ_VIC1(23)
@@ -109,7 +109,7 @@
#define IRQ_IPC S5P_IRQ_VIC3(0)
#define IRQ_HOSTIF S5P_IRQ_VIC3(1)
-#define IRQ_MMC3 S5P_IRQ_VIC3(2)
+#define IRQ_HSMMC3 S5P_IRQ_VIC3(2)
#define IRQ_CEC S5P_IRQ_VIC3(3)
#define IRQ_TSI S5P_IRQ_VIC3(4)
#define IRQ_MDNIE0 S5P_IRQ_VIC3(5)
@@ -121,8 +121,12 @@
#define S5P_EINT_BASE1 (S5P_IRQ_VIC0(0))
#define S5P_EINT_BASE2 (IRQ_VIC_END + 1)
+/* GPIO interrupt */
+#define S5P_GPIOINT_BASE (IRQ_EINT(31) + 1)
+#define S5P_GPIOINT_GROUP_MAXNR 22
+
/* Set the default NR_IRQS */
-#define NR_IRQS (IRQ_EINT(31) + 1)
+#define NR_IRQS (IRQ_EINT(31) + S5P_GPIOINT_COUNT + 1)
/* Compatibility */
#define IRQ_LCD_FIFO IRQ_LCD0
diff --git a/arch/arm/mach-s5pv210/include/mach/map.h b/arch/arm/mach-s5pv210/include/mach/map.h
index bd9afd52466..861d7fe11fc 100644
--- a/arch/arm/mach-s5pv210/include/mach/map.h
+++ b/arch/arm/mach-s5pv210/include/mach/map.h
@@ -57,6 +57,8 @@
#define S5P_SZ_UART SZ_256
+#define S3C_VA_UARTx(x) (S3C_VA_UART + ((x) * S3C_UART_OFFSET))
+
#define S5PV210_PA_SROMC (0xE8000000)
#define S5PV210_PA_CFCON (0xE8200000)
@@ -73,6 +75,9 @@
#define S5PV210_PA_HSMMC(x) (0xEB000000 + ((x) * 0x100000))
+#define S5PV210_PA_HSOTG (0xEC000000)
+#define S5PV210_PA_HSPHY (0xEC100000)
+
#define S5PV210_PA_VIC0 (0xF2000000)
#define S5PV210_PA_VIC1 (0xF2100000)
#define S5PV210_PA_VIC2 (0xF2200000)
@@ -81,6 +86,9 @@
#define S5PV210_PA_SDRAM (0x20000000)
#define S5P_PA_SDRAM S5PV210_PA_SDRAM
+/* S/PDIF */
+#define S5PV210_PA_SPDIF 0xE1100000
+
/* I2S */
#define S5PV210_PA_IIS0 0xEEE30000
#define S5PV210_PA_IIS1 0xE2100000
@@ -96,6 +104,9 @@
#define S5PV210_PA_ADC (0xE1700000)
+#define S5PV210_PA_DMC0 (0xF0000000)
+#define S5PV210_PA_DMC1 (0xF1400000)
+
/* compatibiltiy defines. */
#define S3C_PA_UART S5PV210_PA_UART
#define S3C_PA_HSMMC0 S5PV210_PA_HSMMC(0)
@@ -108,6 +119,7 @@
#define S3C_PA_FB S5PV210_PA_FB
#define S3C_PA_RTC S5PV210_PA_RTC
#define S3C_PA_WDT S5PV210_PA_WATCHDOG
+#define S3C_PA_USB_HSOTG S5PV210_PA_HSOTG
#define S5P_PA_FIMC0 S5PV210_PA_FIMC0
#define S5P_PA_FIMC1 S5PV210_PA_FIMC1
#define S5P_PA_FIMC2 S5PV210_PA_FIMC2
diff --git a/arch/arm/mach-s5pv210/include/mach/pm-core.h b/arch/arm/mach-s5pv210/include/mach/pm-core.h
new file mode 100644
index 00000000000..e8d394f8b05
--- /dev/null
+++ b/arch/arm/mach-s5pv210/include/mach/pm-core.h
@@ -0,0 +1,43 @@
+/* linux/arch/arm/mach-s5pv210/include/mach/pm-core.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * Based on arch/arm/mach-s3c2410/include/mach/pm-core.h,
+ * Copyright 2008 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ * http://armlinux.simtec.co.uk/
+ *
+ * S5PV210 - PM core support for arch/arm/plat-s5p/pm.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+static inline void s3c_pm_debug_init_uart(void)
+{
+ /* nothing here yet */
+}
+
+static inline void s3c_pm_arch_prepare_irqs(void)
+{
+ __raw_writel(s3c_irqwake_intmask, S5P_WAKEUP_MASK);
+ __raw_writel(s3c_irqwake_eintmask, S5P_EINT_WAKEUP_MASK);
+}
+
+static inline void s3c_pm_arch_stop_clocks(void)
+{
+ /* nothing here yet */
+}
+
+static inline void s3c_pm_arch_show_resume_irqs(void)
+{
+ /* nothing here yet */
+}
+
+static inline void s3c_pm_arch_update_uart(void __iomem *regs,
+ struct pm_uart_save *save)
+{
+ /* nothing here yet */
+}
diff --git a/arch/arm/mach-s5pv210/include/mach/regs-clock.h b/arch/arm/mach-s5pv210/include/mach/regs-clock.h
index 499aef73747..ebaabe021af 100644
--- a/arch/arm/mach-s5pv210/include/mach/regs-clock.h
+++ b/arch/arm/mach-s5pv210/include/mach/regs-clock.h
@@ -25,6 +25,7 @@
#define S5P_APLL_CON S5P_CLKREG(0x100)
#define S5P_MPLL_CON S5P_CLKREG(0x108)
#define S5P_EPLL_CON S5P_CLKREG(0x110)
+#define S5P_EPLL_CON1 S5P_CLKREG(0x114)
#define S5P_VPLL_CON S5P_CLKREG(0x120)
#define S5P_CLK_SRC0 S5P_CLKREG(0x200)
@@ -67,11 +68,28 @@
#define S5P_CLKGATE_BUS1 S5P_CLKREG(0x488)
#define S5P_CLK_OUT S5P_CLKREG(0x500)
+/* DIV/MUX STATUS */
+#define S5P_CLKDIV_STAT0 S5P_CLKREG(0x1000)
+#define S5P_CLKDIV_STAT1 S5P_CLKREG(0x1004)
+#define S5P_CLKMUX_STAT0 S5P_CLKREG(0x1100)
+#define S5P_CLKMUX_STAT1 S5P_CLKREG(0x1104)
+
/* CLKSRC0 */
-#define S5P_CLKSRC0_MUX200_MASK (0x1<<16)
+#define S5P_CLKSRC0_MUX200_SHIFT (16)
+#define S5P_CLKSRC0_MUX200_MASK (0x1 << S5P_CLKSRC0_MUX200_SHIFT)
#define S5P_CLKSRC0_MUX166_MASK (0x1<<20)
#define S5P_CLKSRC0_MUX133_MASK (0x1<<24)
+/* CLKSRC2 */
+#define S5P_CLKSRC2_G3D_SHIFT (0)
+#define S5P_CLKSRC2_G3D_MASK (0x3 << S5P_CLKSRC2_G3D_SHIFT)
+#define S5P_CLKSRC2_MFC_SHIFT (4)
+#define S5P_CLKSRC2_MFC_MASK (0x3 << S5P_CLKSRC2_MFC_SHIFT)
+
+/* CLKSRC6*/
+#define S5P_CLKSRC6_ONEDRAM_SHIFT (24)
+#define S5P_CLKSRC6_ONEDRAM_MASK (0x3 << S5P_CLKSRC6_ONEDRAM_SHIFT)
+
/* CLKDIV0 */
#define S5P_CLKDIV0_APLL_SHIFT (0)
#define S5P_CLKDIV0_APLL_MASK (0x7 << S5P_CLKDIV0_APLL_SHIFT)
@@ -90,12 +108,24 @@
#define S5P_CLKDIV0_PCLK66_SHIFT (28)
#define S5P_CLKDIV0_PCLK66_MASK (0x7 << S5P_CLKDIV0_PCLK66_SHIFT)
+/* CLKDIV2 */
+#define S5P_CLKDIV2_G3D_SHIFT (0)
+#define S5P_CLKDIV2_G3D_MASK (0xF << S5P_CLKDIV2_G3D_SHIFT)
+#define S5P_CLKDIV2_MFC_SHIFT (4)
+#define S5P_CLKDIV2_MFC_MASK (0xF << S5P_CLKDIV2_MFC_SHIFT)
+
+/* CLKDIV6 */
+#define S5P_CLKDIV6_ONEDRAM_SHIFT (28)
+#define S5P_CLKDIV6_ONEDRAM_MASK (0xF << S5P_CLKDIV6_ONEDRAM_SHIFT)
+
#define S5P_SWRESET S5P_CLKREG(0x2000)
+#define S5P_ARM_MCS_CON S5P_CLKREG(0x6100)
+
/* Registers related to power management */
#define S5P_PWR_CFG S5P_CLKREG(0xC000)
#define S5P_EINT_WAKEUP_MASK S5P_CLKREG(0xC004)
-#define S5P_WAKEUP_MASK S5P_CLKREG(0xC008)
+#define S5P_WAKEUP_MASK S5P_CLKREG(0xC008)
#define S5P_PWR_MODE S5P_CLKREG(0xC00C)
#define S5P_NORMAL_CFG S5P_CLKREG(0xC010)
#define S5P_IDLE_CFG S5P_CLKREG(0xC020)
@@ -159,8 +189,11 @@
#define S5P_SLEEP_CFG_USBOSC_EN (1 << 1)
/* OTHERS Resgister */
+#define S5P_OTHERS_RET_IO (1 << 31)
+#define S5P_OTHERS_RET_CF (1 << 30)
+#define S5P_OTHERS_RET_MMC (1 << 29)
+#define S5P_OTHERS_RET_UART (1 << 28)
#define S5P_OTHERS_USB_SIG_MASK (1 << 16)
-#define S5P_OTHERS_MIPI_DPHY_EN (1 << 28)
/* MIPI */
#define S5P_MIPI_DPHY_EN (3)
diff --git a/arch/arm/mach-s5pv210/include/mach/regs-gpio.h b/arch/arm/mach-s5pv210/include/mach/regs-gpio.h
index 49e029b4978..de0c8997607 100644
--- a/arch/arm/mach-s5pv210/include/mach/regs-gpio.h
+++ b/arch/arm/mach-s5pv210/include/mach/regs-gpio.h
@@ -31,13 +31,6 @@
#define eint_irq_to_bit(irq) (1 << (EINT_OFFSET(irq) & 0x7))
-/* values for S5P_EXTINT0 */
-#define S5P_EXTINT_LOWLEV (0x00)
-#define S5P_EXTINT_HILEV (0x01)
-#define S5P_EXTINT_FALLEDGE (0x02)
-#define S5P_EXTINT_RISEEDGE (0x03)
-#define S5P_EXTINT_BOTHEDGE (0x04)
-
#define EINT_MODE S3C_GPIO_SFN(0xf)
#define EINT_GPIO_0(x) S5PV210_GPH0(x)
diff --git a/arch/arm/mach-s5pv210/include/mach/regs-sys.h b/arch/arm/mach-s5pv210/include/mach/regs-sys.h
new file mode 100644
index 00000000000..26691d39d0f
--- /dev/null
+++ b/arch/arm/mach-s5pv210/include/mach/regs-sys.h
@@ -0,0 +1,19 @@
+/* arch/arm/mach-s5pv210/include/mach/regs-sys.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * S5PV210 - System registers definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#define S5PV210_USB_PHY_CON (S3C_VA_SYS + 0xE80C)
+#define S5PV210_USB_PHY0_EN (1 << 0)
+#define S5PV210_USB_PHY1_EN (1 << 1)
+
+/* compatibility defines for s3c-hsotg driver */
+#define S3C64XX_OTHERS S5PV210_USB_PHY_CON
+#define S3C64XX_OTHERS_USBMASK S5PV210_USB_PHY0_EN
diff --git a/arch/arm/mach-s5pv210/include/mach/vmalloc.h b/arch/arm/mach-s5pv210/include/mach/vmalloc.h
index df9a2880832..a6c659d68a5 100644
--- a/arch/arm/mach-s5pv210/include/mach/vmalloc.h
+++ b/arch/arm/mach-s5pv210/include/mach/vmalloc.h
@@ -17,6 +17,6 @@
#ifndef __ASM_ARCH_VMALLOC_H
#define __ASM_ARCH_VMALLOC_H __FILE__
-#define VMALLOC_END (0xE0000000UL)
+#define VMALLOC_END 0xF6000000UL
#endif /* __ASM_ARCH_VMALLOC_H */
diff --git a/arch/arm/mach-s5pv210/mach-aquila.c b/arch/arm/mach-s5pv210/mach-aquila.c
index 00883087363..28677caf361 100644
--- a/arch/arm/mach-s5pv210/mach-aquila.c
+++ b/arch/arm/mach-s5pv210/mach-aquila.c
@@ -16,6 +16,8 @@
#include <linux/i2c.h>
#include <linux/i2c-gpio.h>
#include <linux/mfd/max8998.h>
+#include <linux/mfd/wm8994/pdata.h>
+#include <linux/regulator/fixed.h>
#include <linux/gpio_keys.h>
#include <linux/input.h>
#include <linux/gpio.h>
@@ -379,6 +381,119 @@ static struct max8998_platform_data aquila_max8998_pdata = {
};
#endif
+static struct regulator_consumer_supply wm8994_fixed_voltage0_supplies[] = {
+ {
+ .dev_name = "5-001a",
+ .supply = "DBVDD",
+ }, {
+ .dev_name = "5-001a",
+ .supply = "AVDD2",
+ }, {
+ .dev_name = "5-001a",
+ .supply = "CPVDD",
+ },
+};
+
+static struct regulator_consumer_supply wm8994_fixed_voltage1_supplies[] = {
+ {
+ .dev_name = "5-001a",
+ .supply = "SPKVDD1",
+ }, {
+ .dev_name = "5-001a",
+ .supply = "SPKVDD2",
+ },
+};
+
+static struct regulator_init_data wm8994_fixed_voltage0_init_data = {
+ .constraints = {
+ .always_on = 1,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(wm8994_fixed_voltage0_supplies),
+ .consumer_supplies = wm8994_fixed_voltage0_supplies,
+};
+
+static struct regulator_init_data wm8994_fixed_voltage1_init_data = {
+ .constraints = {
+ .always_on = 1,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(wm8994_fixed_voltage1_supplies),
+ .consumer_supplies = wm8994_fixed_voltage1_supplies,
+};
+
+static struct fixed_voltage_config wm8994_fixed_voltage0_config = {
+ .supply_name = "VCC_1.8V_PDA",
+ .microvolts = 1800000,
+ .gpio = -EINVAL,
+ .init_data = &wm8994_fixed_voltage0_init_data,
+};
+
+static struct fixed_voltage_config wm8994_fixed_voltage1_config = {
+ .supply_name = "V_BAT",
+ .microvolts = 3700000,
+ .gpio = -EINVAL,
+ .init_data = &wm8994_fixed_voltage1_init_data,
+};
+
+static struct platform_device wm8994_fixed_voltage0 = {
+ .name = "reg-fixed-voltage",
+ .id = 0,
+ .dev = {
+ .platform_data = &wm8994_fixed_voltage0_config,
+ },
+};
+
+static struct platform_device wm8994_fixed_voltage1 = {
+ .name = "reg-fixed-voltage",
+ .id = 1,
+ .dev = {
+ .platform_data = &wm8994_fixed_voltage1_config,
+ },
+};
+
+static struct regulator_consumer_supply wm8994_avdd1_supply = {
+ .dev_name = "5-001a",
+ .supply = "AVDD1",
+};
+
+static struct regulator_consumer_supply wm8994_dcvdd_supply = {
+ .dev_name = "5-001a",
+ .supply = "DCVDD",
+};
+
+static struct regulator_init_data wm8994_ldo1_data = {
+ .constraints = {
+ .name = "AVDD1_3.0V",
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &wm8994_avdd1_supply,
+};
+
+static struct regulator_init_data wm8994_ldo2_data = {
+ .constraints = {
+ .name = "DCVDD_1.0V",
+ },
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &wm8994_dcvdd_supply,
+};
+
+static struct wm8994_pdata wm8994_platform_data = {
+ /* configure gpio1 function: 0x0001(Logic level input/output) */
+ .gpio_defaults[0] = 0x0001,
+ /* configure gpio3/4/5/7 function for AIF2 voice */
+ .gpio_defaults[2] = 0x8100,
+ .gpio_defaults[3] = 0x8100,
+ .gpio_defaults[4] = 0x8100,
+ .gpio_defaults[6] = 0x0100,
+ /* configure gpio8/9/10/11 function for AIF3 BT */
+ .gpio_defaults[7] = 0x8100,
+ .gpio_defaults[8] = 0x0100,
+ .gpio_defaults[9] = 0x0100,
+ .gpio_defaults[10] = 0x0100,
+ .ldo[0] = { S5PV210_MP03(6), NULL, &wm8994_ldo1_data }, /* XM0FRNB_2 */
+ .ldo[1] = { 0, NULL, &wm8994_ldo2_data },
+};
+
/* GPIO I2C PMIC */
#define AP_I2C_GPIO_PMIC_BUS_4 4
static struct i2c_gpio_platform_data aquila_i2c_gpio_pmic_data = {
@@ -404,6 +519,29 @@ static struct i2c_board_info i2c_gpio_pmic_devs[] __initdata = {
#endif
};
+/* GPIO I2C AP 1.8V */
+#define AP_I2C_GPIO_BUS_5 5
+static struct i2c_gpio_platform_data aquila_i2c_gpio5_data = {
+ .sda_pin = S5PV210_MP05(3), /* XM0ADDR_11 */
+ .scl_pin = S5PV210_MP05(2), /* XM0ADDR_10 */
+};
+
+static struct platform_device aquila_i2c_gpio5 = {
+ .name = "i2c-gpio",
+ .id = AP_I2C_GPIO_BUS_5,
+ .dev = {
+ .platform_data = &aquila_i2c_gpio5_data,
+ },
+};
+
+static struct i2c_board_info i2c_gpio5_devs[] __initdata = {
+ {
+ /* CS/ADDR = low 0x34 (FYI: high = 0x36) */
+ I2C_BOARD_INFO("wm8994", 0x1a),
+ .platform_data = &wm8994_platform_data,
+ },
+};
+
/* PMIC Power button */
static struct gpio_keys_button aquila_gpio_keys_table[] = {
{
@@ -475,6 +613,7 @@ static void aquila_setup_sdhci(void)
static struct platform_device *aquila_devices[] __initdata = {
&aquila_i2c_gpio_pmic,
+ &aquila_i2c_gpio5,
&aquila_device_gpiokeys,
&s3c_device_fb,
&s5p_device_onenand,
@@ -484,8 +623,33 @@ static struct platform_device *aquila_devices[] __initdata = {
&s5p_device_fimc0,
&s5p_device_fimc1,
&s5p_device_fimc2,
+ &s5pv210_device_iis0,
+ &wm8994_fixed_voltage0,
+ &wm8994_fixed_voltage1,
};
+static void __init aquila_sound_init(void)
+{
+ unsigned int gpio;
+
+ /* CODEC_XTAL_EN
+ *
+ * The Aquila board have a oscillator which provide main clock
+ * to WM8994 codec. The oscillator provide 24MHz clock to WM8994
+ * clock. Set gpio setting of "CODEC_XTAL_EN" to enable a oscillator.
+ * */
+ gpio = S5PV210_GPH3(2); /* XEINT_26 */
+ gpio_request(gpio, "CODEC_XTAL_EN");
+ s3c_gpio_cfgpin(gpio, S3C_GPIO_OUTPUT);
+ s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+
+ /* Ths main clock of WM8994 codec uses the output of CLKOUT pin.
+ * The CLKOUT[9:8] set to 0x3(XUSBXTI) of 0xE010E000(OTHERS)
+ * because it needs 24MHz clock to operate WM8994 codec.
+ */
+ __raw_writel(__raw_readl(S5P_OTHERS) | (0x3 << 8), S5P_OTHERS);
+}
+
static void __init aquila_map_io(void)
{
s5p_init_io(NULL, 0, S5P_VA_CHIPID);
@@ -506,6 +670,11 @@ static void __init aquila_machine_init(void)
s3c_fimc_setname(1, "s5p-fimc");
s3c_fimc_setname(2, "s5p-fimc");
+ /* SOUND */
+ aquila_sound_init();
+ i2c_register_board_info(AP_I2C_GPIO_BUS_5, i2c_gpio5_devs,
+ ARRAY_SIZE(i2c_gpio5_devs));
+
/* FB */
s3c_fb_set_platdata(&aquila_lcd_pdata);
diff --git a/arch/arm/mach-s5pv210/mach-goni.c b/arch/arm/mach-s5pv210/mach-goni.c
index d9ecf57fc2a..b1dcf964a76 100644
--- a/arch/arm/mach-s5pv210/mach-goni.c
+++ b/arch/arm/mach-s5pv210/mach-goni.c
@@ -15,7 +15,13 @@
#include <linux/fb.h>
#include <linux/i2c.h>
#include <linux/i2c-gpio.h>
+#include <linux/i2c/qt602240_ts.h>
#include <linux/mfd/max8998.h>
+#include <linux/mfd/wm8994/pdata.h>
+#include <linux/regulator/fixed.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/spi_gpio.h>
+#include <linux/lcd.h>
#include <linux/gpio_keys.h>
#include <linux/input.h>
#include <linux/gpio.h>
@@ -35,7 +41,10 @@
#include <plat/devs.h>
#include <plat/cpu.h>
#include <plat/fb.h>
+#include <plat/iic.h>
+#include <plat/keypad.h>
#include <plat/sdhci.h>
+#include <plat/clock.h>
/* Following are default values for UCON, ULCON and UFCON UART registers */
#define GONI_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
@@ -87,13 +96,12 @@ static struct s3c2410_uartcfg goni_uartcfgs[] __initdata = {
/* Frame Buffer */
static struct s3c_fb_pd_win goni_fb_win0 = {
.win_mode = {
- .pixclock = 1000000000000ULL / ((16+16+2+480)*(28+3+2+800)*55),
.left_margin = 16,
.right_margin = 16,
- .upper_margin = 3,
+ .upper_margin = 2,
.lower_margin = 28,
.hsync_len = 2,
- .vsync_len = 2,
+ .vsync_len = 1,
.xres = 480,
.yres = 800,
.refresh = 55,
@@ -111,9 +119,160 @@ static struct s3c_fb_platdata goni_lcd_pdata __initdata = {
.setup_gpio = s5pv210_fb_gpio_setup_24bpp,
};
+static int lcd_power_on(struct lcd_device *ld, int enable)
+{
+ return 1;
+}
+
+static int reset_lcd(struct lcd_device *ld)
+{
+ static unsigned int first = 1;
+ int reset_gpio = -1;
+
+ reset_gpio = S5PV210_MP05(5);
+
+ if (first) {
+ gpio_request(reset_gpio, "MLCD_RST");
+ first = 0;
+ }
+
+ gpio_direction_output(reset_gpio, 1);
+ return 1;
+}
+
+static struct lcd_platform_data goni_lcd_platform_data = {
+ .reset = reset_lcd,
+ .power_on = lcd_power_on,
+ .lcd_enabled = 0,
+ .reset_delay = 120, /* 120ms */
+ .power_on_delay = 25, /* 25ms */
+ .power_off_delay = 200, /* 200ms */
+};
+
+#define LCD_BUS_NUM 3
+static struct spi_board_info spi_board_info[] __initdata = {
+ {
+ .modalias = "s6e63m0",
+ .platform_data = &goni_lcd_platform_data,
+ .max_speed_hz = 1200000,
+ .bus_num = LCD_BUS_NUM,
+ .chip_select = 0,
+ .mode = SPI_MODE_3,
+ .controller_data = (void *)S5PV210_MP01(1), /* DISPLAY_CS */
+ },
+};
+
+static struct spi_gpio_platform_data lcd_spi_gpio_data = {
+ .sck = S5PV210_MP04(1), /* DISPLAY_CLK */
+ .mosi = S5PV210_MP04(3), /* DISPLAY_SI */
+ .miso = SPI_GPIO_NO_MISO,
+ .num_chipselect = 1,
+};
+
+static struct platform_device goni_spi_gpio = {
+ .name = "spi_gpio",
+ .id = LCD_BUS_NUM,
+ .dev = {
+ .parent = &s3c_device_fb.dev,
+ .platform_data = &lcd_spi_gpio_data,
+ },
+};
+
+/* KEYPAD */
+static uint32_t keymap[] __initdata = {
+ /* KEY(row, col, keycode) */
+ KEY(0, 1, KEY_MENU), /* Send */
+ KEY(0, 2, KEY_BACK), /* End */
+ KEY(1, 1, KEY_CONFIG), /* Half shot */
+ KEY(1, 2, KEY_VOLUMEUP),
+ KEY(2, 1, KEY_CAMERA), /* Full shot */
+ KEY(2, 2, KEY_VOLUMEDOWN),
+};
+
+static struct matrix_keymap_data keymap_data __initdata = {
+ .keymap = keymap,
+ .keymap_size = ARRAY_SIZE(keymap),
+};
+
+static struct samsung_keypad_platdata keypad_data __initdata = {
+ .keymap_data = &keymap_data,
+ .rows = 3,
+ .cols = 3,
+};
+
+/* Radio */
+static struct i2c_board_info i2c1_devs[] __initdata = {
+ {
+ I2C_BOARD_INFO("si470x", 0x10),
+ },
+};
+
+static void __init goni_radio_init(void)
+{
+ int gpio;
+
+ gpio = S5PV210_GPJ2(4); /* XMSMDATA_4 */
+ gpio_request(gpio, "FM_INT");
+ s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(0xf));
+ i2c1_devs[0].irq = gpio_to_irq(gpio);
+
+ gpio = S5PV210_GPJ2(5); /* XMSMDATA_5 */
+ gpio_request(gpio, "FM_RST");
+ gpio_direction_output(gpio, 1);
+}
+
+/* TSP */
+static struct qt602240_platform_data qt602240_platform_data = {
+ .x_line = 17,
+ .y_line = 11,
+ .x_size = 800,
+ .y_size = 480,
+ .blen = 0x21,
+ .threshold = 0x28,
+ .voltage = 2800000, /* 2.8V */
+ .orient = QT602240_DIAGONAL,
+};
+
+static struct s3c2410_platform_i2c i2c2_data __initdata = {
+ .flags = 0,
+ .bus_num = 2,
+ .slave_addr = 0x10,
+ .frequency = 400 * 1000,
+ .sda_delay = 100,
+};
+
+static struct i2c_board_info i2c2_devs[] __initdata = {
+ {
+ I2C_BOARD_INFO("qt602240_ts", 0x4a),
+ .platform_data = &qt602240_platform_data,
+ },
+};
+
+static void __init goni_tsp_init(void)
+{
+ int gpio;
+
+ gpio = S5PV210_GPJ1(3); /* XMSMADDR_11 */
+ gpio_request(gpio, "TSP_LDO_ON");
+ gpio_direction_output(gpio, 1);
+ gpio_export(gpio, 0);
+
+ gpio = S5PV210_GPJ0(5); /* XMSMADDR_5 */
+ gpio_request(gpio, "TSP_INT");
+
+ s5p_register_gpio_interrupt(gpio);
+ s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(0xf));
+ s3c_gpio_setpull(gpio, S3C_GPIO_PULL_UP);
+ i2c2_devs[0].irq = gpio_to_irq(gpio);
+}
+
/* MAX8998 regulators */
#if defined(CONFIG_REGULATOR_MAX8998) || defined(CONFIG_REGULATOR_MAX8998_MODULE)
+static struct regulator_consumer_supply goni_ldo5_consumers[] = {
+ REGULATOR_SUPPLY("vmmc", "s3c-sdhci.0"),
+};
+
static struct regulator_init_data goni_ldo2_data = {
.constraints = {
.name = "VALIVE_1.1V",
@@ -153,6 +312,8 @@ static struct regulator_init_data goni_ldo5_data = {
.max_uV = 2800000,
.apply_uV = 1,
},
+ .num_consumer_supplies = ARRAY_SIZE(goni_ldo5_consumers),
+ .consumer_supplies = goni_ldo5_consumers,
};
static struct regulator_init_data goni_ldo6_data = {
@@ -360,6 +521,119 @@ static struct max8998_platform_data goni_max8998_pdata = {
};
#endif
+static struct regulator_consumer_supply wm8994_fixed_voltage0_supplies[] = {
+ {
+ .dev_name = "5-001a",
+ .supply = "DBVDD",
+ }, {
+ .dev_name = "5-001a",
+ .supply = "AVDD2",
+ }, {
+ .dev_name = "5-001a",
+ .supply = "CPVDD",
+ },
+};
+
+static struct regulator_consumer_supply wm8994_fixed_voltage1_supplies[] = {
+ {
+ .dev_name = "5-001a",
+ .supply = "SPKVDD1",
+ }, {
+ .dev_name = "5-001a",
+ .supply = "SPKVDD2",
+ },
+};
+
+static struct regulator_init_data wm8994_fixed_voltage0_init_data = {
+ .constraints = {
+ .always_on = 1,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(wm8994_fixed_voltage0_supplies),
+ .consumer_supplies = wm8994_fixed_voltage0_supplies,
+};
+
+static struct regulator_init_data wm8994_fixed_voltage1_init_data = {
+ .constraints = {
+ .always_on = 1,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(wm8994_fixed_voltage1_supplies),
+ .consumer_supplies = wm8994_fixed_voltage1_supplies,
+};
+
+static struct fixed_voltage_config wm8994_fixed_voltage0_config = {
+ .supply_name = "VCC_1.8V_PDA",
+ .microvolts = 1800000,
+ .gpio = -EINVAL,
+ .init_data = &wm8994_fixed_voltage0_init_data,
+};
+
+static struct fixed_voltage_config wm8994_fixed_voltage1_config = {
+ .supply_name = "V_BAT",
+ .microvolts = 3700000,
+ .gpio = -EINVAL,
+ .init_data = &wm8994_fixed_voltage1_init_data,
+};
+
+static struct platform_device wm8994_fixed_voltage0 = {
+ .name = "reg-fixed-voltage",
+ .id = 0,
+ .dev = {
+ .platform_data = &wm8994_fixed_voltage0_config,
+ },
+};
+
+static struct platform_device wm8994_fixed_voltage1 = {
+ .name = "reg-fixed-voltage",
+ .id = 1,
+ .dev = {
+ .platform_data = &wm8994_fixed_voltage1_config,
+ },
+};
+
+static struct regulator_consumer_supply wm8994_avdd1_supply = {
+ .dev_name = "5-001a",
+ .supply = "AVDD1",
+};
+
+static struct regulator_consumer_supply wm8994_dcvdd_supply = {
+ .dev_name = "5-001a",
+ .supply = "DCVDD",
+};
+
+static struct regulator_init_data wm8994_ldo1_data = {
+ .constraints = {
+ .name = "AVDD1_3.0V",
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &wm8994_avdd1_supply,
+};
+
+static struct regulator_init_data wm8994_ldo2_data = {
+ .constraints = {
+ .name = "DCVDD_1.0V",
+ },
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &wm8994_dcvdd_supply,
+};
+
+static struct wm8994_pdata wm8994_platform_data = {
+ /* configure gpio1 function: 0x0001(Logic level input/output) */
+ .gpio_defaults[0] = 0x0001,
+ /* configure gpio3/4/5/7 function for AIF2 voice */
+ .gpio_defaults[2] = 0x8100,
+ .gpio_defaults[3] = 0x8100,
+ .gpio_defaults[4] = 0x8100,
+ .gpio_defaults[6] = 0x0100,
+ /* configure gpio8/9/10/11 function for AIF3 BT */
+ .gpio_defaults[7] = 0x8100,
+ .gpio_defaults[8] = 0x0100,
+ .gpio_defaults[9] = 0x0100,
+ .gpio_defaults[10] = 0x0100,
+ .ldo[0] = { S5PV210_MP03(6), NULL, &wm8994_ldo1_data }, /* XM0FRNB_2 */
+ .ldo[1] = { 0, NULL, &wm8994_ldo2_data },
+};
+
/* GPIO I2C PMIC */
#define AP_I2C_GPIO_PMIC_BUS_4 4
static struct i2c_gpio_platform_data goni_i2c_gpio_pmic_data = {
@@ -385,6 +659,29 @@ static struct i2c_board_info i2c_gpio_pmic_devs[] __initdata = {
#endif
};
+/* GPIO I2C AP 1.8V */
+#define AP_I2C_GPIO_BUS_5 5
+static struct i2c_gpio_platform_data goni_i2c_gpio5_data = {
+ .sda_pin = S5PV210_MP05(3), /* XM0ADDR_11 */
+ .scl_pin = S5PV210_MP05(2), /* XM0ADDR_10 */
+};
+
+static struct platform_device goni_i2c_gpio5 = {
+ .name = "i2c-gpio",
+ .id = AP_I2C_GPIO_BUS_5,
+ .dev = {
+ .platform_data = &goni_i2c_gpio5_data,
+ },
+};
+
+static struct i2c_board_info i2c_gpio5_devs[] __initdata = {
+ {
+ /* CS/ADDR = low 0x34 (FYI: high = 0x36) */
+ I2C_BOARD_INFO("wm8994", 0x1a),
+ .platform_data = &wm8994_platform_data,
+ },
+};
+
/* PMIC Power button */
static struct gpio_keys_button goni_gpio_keys_table[] = {
{
@@ -444,11 +741,37 @@ static struct s3c_sdhci_platdata goni_hsmmc2_data __initdata = {
.ext_cd_gpio_invert = 1,
};
+static struct regulator_consumer_supply mmc2_supplies[] = {
+ REGULATOR_SUPPLY("vmmc", "s3c-sdhci.2"),
+};
+
+static struct regulator_init_data mmc2_fixed_voltage_init_data = {
+ .constraints = {
+ .name = "V_TF_2.8V",
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(mmc2_supplies),
+ .consumer_supplies = mmc2_supplies,
+};
+
+static struct fixed_voltage_config mmc2_fixed_voltage_config = {
+ .supply_name = "EXT_FLASH_EN",
+ .microvolts = 2800000,
+ .gpio = GONI_EXT_FLASH_EN,
+ .enable_high = true,
+ .init_data = &mmc2_fixed_voltage_init_data,
+};
+
+static struct platform_device mmc2_fixed_voltage = {
+ .name = "reg-fixed-voltage",
+ .id = 2,
+ .dev = {
+ .platform_data = &mmc2_fixed_voltage_config,
+ },
+};
+
static void goni_setup_sdhci(void)
{
- gpio_request(GONI_EXT_FLASH_EN, "FLASH_EN");
- gpio_direction_output(GONI_EXT_FLASH_EN, 1);
-
s3c_sdhci0_set_platdata(&goni_hsmmc0_data);
s3c_sdhci1_set_platdata(&goni_hsmmc1_data);
s3c_sdhci2_set_platdata(&goni_hsmmc2_data);
@@ -457,7 +780,10 @@ static void goni_setup_sdhci(void)
static struct platform_device *goni_devices[] __initdata = {
&s3c_device_fb,
&s5p_device_onenand,
+ &goni_spi_gpio,
&goni_i2c_gpio_pmic,
+ &goni_i2c_gpio5,
+ &mmc2_fixed_voltage,
&goni_device_gpiokeys,
&s5p_device_fimc0,
&s5p_device_fimc1,
@@ -465,8 +791,24 @@ static struct platform_device *goni_devices[] __initdata = {
&s3c_device_hsmmc0,
&s3c_device_hsmmc1,
&s3c_device_hsmmc2,
+ &s5pv210_device_iis0,
+ &s3c_device_usb_hsotg,
+ &samsung_device_keypad,
+ &s3c_device_i2c1,
+ &s3c_device_i2c2,
+ &wm8994_fixed_voltage0,
+ &wm8994_fixed_voltage1,
};
+static void __init goni_sound_init(void)
+{
+ /* Ths main clock of WM8994 codec uses the output of CLKOUT pin.
+ * The CLKOUT[9:8] set to 0x3(XUSBXTI) of 0xE010E000(OTHERS)
+ * because it needs 24MHz clock to operate WM8994 codec.
+ */
+ __raw_writel(__raw_readl(S5P_OTHERS) | (0x3 << 8), S5P_OTHERS);
+}
+
static void __init goni_map_io(void)
{
s5p_init_io(NULL, 0, S5P_VA_CHIPID);
@@ -476,6 +818,20 @@ static void __init goni_map_io(void)
static void __init goni_machine_init(void)
{
+ /* Radio: call before I2C 1 registeration */
+ goni_radio_init();
+
+ /* I2C1 */
+ s3c_i2c1_set_platdata(NULL);
+ i2c_register_board_info(1, i2c1_devs, ARRAY_SIZE(i2c1_devs));
+
+ /* TSP: call before I2C 2 registeration */
+ goni_tsp_init();
+
+ /* I2C2 */
+ s3c_i2c2_set_platdata(&i2c2_data);
+ i2c_register_board_info(2, i2c2_devs, ARRAY_SIZE(i2c2_devs));
+
/* PMIC */
goni_pmic_init();
i2c_register_board_info(AP_I2C_GPIO_PMIC_BUS_4, i2c_gpio_pmic_devs,
@@ -483,9 +839,22 @@ static void __init goni_machine_init(void)
/* SDHCI */
goni_setup_sdhci();
+ /* SOUND */
+ goni_sound_init();
+ i2c_register_board_info(AP_I2C_GPIO_BUS_5, i2c_gpio5_devs,
+ ARRAY_SIZE(i2c_gpio5_devs));
+
/* FB */
s3c_fb_set_platdata(&goni_lcd_pdata);
+ /* SPI */
+ spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
+
+ /* KEYPAD */
+ samsung_keypad_set_platdata(&keypad_data);
+
+ clk_xusbxti.rate = 24000000;
+
platform_add_devices(goni_devices, ARRAY_SIZE(goni_devices));
}
diff --git a/arch/arm/mach-s5pv210/mach-smdkc110.c b/arch/arm/mach-s5pv210/mach-smdkc110.c
index cea9bca79d8..0ad7924fe62 100644
--- a/arch/arm/mach-s5pv210/mach-smdkc110.c
+++ b/arch/arm/mach-s5pv210/mach-smdkc110.c
@@ -28,6 +28,7 @@
#include <plat/cpu.h>
#include <plat/ata.h>
#include <plat/iic.h>
+#include <plat/pm.h>
/* Following are default values for UCON, ULCON and UFCON UART registers */
#define SMDKC110_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
@@ -81,6 +82,7 @@ static struct s3c_ide_platdata smdkc110_ide_pdata __initdata = {
static struct platform_device *smdkc110_devices[] __initdata = {
&s5pv210_device_iis0,
&s5pv210_device_ac97,
+ &s5pv210_device_spdif,
&s3c_device_cfcon,
&s3c_device_i2c0,
&s3c_device_i2c1,
@@ -110,6 +112,8 @@ static void __init smdkc110_map_io(void)
static void __init smdkc110_machine_init(void)
{
+ s3c_pm_init();
+
s3c_i2c0_set_platdata(NULL);
s3c_i2c1_set_platdata(NULL);
s3c_i2c2_set_platdata(NULL);
diff --git a/arch/arm/mach-s5pv210/mach-smdkv210.c b/arch/arm/mach-s5pv210/mach-smdkv210.c
index 83189ae9da9..bcd7a5d5340 100644
--- a/arch/arm/mach-s5pv210/mach-smdkv210.c
+++ b/arch/arm/mach-s5pv210/mach-smdkv210.c
@@ -31,6 +31,7 @@
#include <plat/ata.h>
#include <plat/iic.h>
#include <plat/keypad.h>
+#include <plat/pm.h>
/* Following are default values for UCON, ULCON and UFCON UART registers */
#define SMDKV210_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
@@ -103,6 +104,7 @@ static struct samsung_keypad_platdata smdkv210_keypad_data __initdata = {
static struct platform_device *smdkv210_devices[] __initdata = {
&s5pv210_device_iis0,
&s5pv210_device_ac97,
+ &s5pv210_device_spdif,
&s3c_device_adc,
&s3c_device_cfcon,
&s3c_device_hsmmc0,
@@ -145,6 +147,8 @@ static void __init smdkv210_map_io(void)
static void __init smdkv210_machine_init(void)
{
+ s3c_pm_init();
+
samsung_keypad_set_platdata(&smdkv210_keypad_data);
s3c24xx_ts_set_platdata(&s3c_ts_platform);
diff --git a/arch/arm/mach-s5pv210/mach-torbreck.c b/arch/arm/mach-s5pv210/mach-torbreck.c
new file mode 100644
index 00000000000..043c938806b
--- /dev/null
+++ b/arch/arm/mach-s5pv210/mach-torbreck.c
@@ -0,0 +1,131 @@
+/* linux/arch/arm/mach-s5pv210/mach-torbreck.c
+ *
+ * Copyright (c) 2010 aESOP Community
+ * http://www.aesop.or.kr/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/serial_core.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+
+#include <mach/map.h>
+#include <mach/regs-clock.h>
+
+#include <plat/regs-serial.h>
+#include <plat/s5pv210.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+#include <plat/iic.h>
+
+/* Following are default values for UCON, ULCON and UFCON UART registers */
+#define TORBRECK_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
+ S3C2410_UCON_RXILEVEL | \
+ S3C2410_UCON_TXIRQMODE | \
+ S3C2410_UCON_RXIRQMODE | \
+ S3C2410_UCON_RXFIFO_TOI | \
+ S3C2443_UCON_RXERR_IRQEN)
+
+#define TORBRECK_ULCON_DEFAULT S3C2410_LCON_CS8
+
+#define TORBRECK_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \
+ S5PV210_UFCON_TXTRIG4 | \
+ S5PV210_UFCON_RXTRIG4)
+
+static struct s3c2410_uartcfg torbreck_uartcfgs[] __initdata = {
+ [0] = {
+ .hwport = 0,
+ .flags = 0,
+ .ucon = TORBRECK_UCON_DEFAULT,
+ .ulcon = TORBRECK_ULCON_DEFAULT,
+ .ufcon = TORBRECK_UFCON_DEFAULT,
+ },
+ [1] = {
+ .hwport = 1,
+ .flags = 0,
+ .ucon = TORBRECK_UCON_DEFAULT,
+ .ulcon = TORBRECK_ULCON_DEFAULT,
+ .ufcon = TORBRECK_UFCON_DEFAULT,
+ },
+ [2] = {
+ .hwport = 2,
+ .flags = 0,
+ .ucon = TORBRECK_UCON_DEFAULT,
+ .ulcon = TORBRECK_ULCON_DEFAULT,
+ .ufcon = TORBRECK_UFCON_DEFAULT,
+ },
+ [3] = {
+ .hwport = 3,
+ .flags = 0,
+ .ucon = TORBRECK_UCON_DEFAULT,
+ .ulcon = TORBRECK_ULCON_DEFAULT,
+ .ufcon = TORBRECK_UFCON_DEFAULT,
+ },
+};
+
+static struct platform_device *torbreck_devices[] __initdata = {
+ &s5pv210_device_iis0,
+ &s3c_device_cfcon,
+ &s3c_device_hsmmc0,
+ &s3c_device_hsmmc1,
+ &s3c_device_hsmmc2,
+ &s3c_device_hsmmc3,
+ &s3c_device_i2c0,
+ &s3c_device_i2c1,
+ &s3c_device_i2c2,
+ &s3c_device_rtc,
+ &s3c_device_wdt,
+};
+
+static struct i2c_board_info torbreck_i2c_devs0[] __initdata = {
+ /* To Be Updated */
+};
+
+static struct i2c_board_info torbreck_i2c_devs1[] __initdata = {
+ /* To Be Updated */
+};
+
+static struct i2c_board_info torbreck_i2c_devs2[] __initdata = {
+ /* To Be Updated */
+};
+
+static void __init torbreck_map_io(void)
+{
+ s5p_init_io(NULL, 0, S5P_VA_CHIPID);
+ s3c24xx_init_clocks(24000000);
+ s3c24xx_init_uarts(torbreck_uartcfgs, ARRAY_SIZE(torbreck_uartcfgs));
+}
+
+static void __init torbreck_machine_init(void)
+{
+ s3c_i2c0_set_platdata(NULL);
+ s3c_i2c1_set_platdata(NULL);
+ s3c_i2c2_set_platdata(NULL);
+ i2c_register_board_info(0, torbreck_i2c_devs0,
+ ARRAY_SIZE(torbreck_i2c_devs0));
+ i2c_register_board_info(1, torbreck_i2c_devs1,
+ ARRAY_SIZE(torbreck_i2c_devs1));
+ i2c_register_board_info(2, torbreck_i2c_devs2,
+ ARRAY_SIZE(torbreck_i2c_devs2));
+
+ platform_add_devices(torbreck_devices, ARRAY_SIZE(torbreck_devices));
+}
+
+MACHINE_START(TORBRECK, "TORBRECK")
+ /* Maintainer: Hyunchul Ko <ghcstop@gmail.com> */
+ .boot_params = S5P_PA_SDRAM + 0x100,
+ .init_irq = s5pv210_init_irq,
+ .map_io = torbreck_map_io,
+ .init_machine = torbreck_machine_init,
+ .timer = &s3c24xx_timer,
+MACHINE_END
diff --git a/arch/arm/mach-s5pv210/pm.c b/arch/arm/mach-s5pv210/pm.c
new file mode 100644
index 00000000000..549d7924fd4
--- /dev/null
+++ b/arch/arm/mach-s5pv210/pm.c
@@ -0,0 +1,166 @@
+/* linux/arch/arm/mach-s5pv210/pm.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * S5PV210 - Power Management support
+ *
+ * Based on arch/arm/mach-s3c2410/pm.c
+ * Copyright (c) 2006 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/suspend.h>
+#include <linux/io.h>
+
+#include <plat/cpu.h>
+#include <plat/pm.h>
+#include <plat/regs-timer.h>
+
+#include <mach/regs-irq.h>
+#include <mach/regs-clock.h>
+
+static struct sleep_save s5pv210_core_save[] = {
+ /* Clock source */
+ SAVE_ITEM(S5P_CLK_SRC0),
+ SAVE_ITEM(S5P_CLK_SRC1),
+ SAVE_ITEM(S5P_CLK_SRC2),
+ SAVE_ITEM(S5P_CLK_SRC3),
+ SAVE_ITEM(S5P_CLK_SRC4),
+ SAVE_ITEM(S5P_CLK_SRC5),
+ SAVE_ITEM(S5P_CLK_SRC6),
+
+ /* Clock source Mask */
+ SAVE_ITEM(S5P_CLK_SRC_MASK0),
+ SAVE_ITEM(S5P_CLK_SRC_MASK1),
+
+ /* Clock Divider */
+ SAVE_ITEM(S5P_CLK_DIV0),
+ SAVE_ITEM(S5P_CLK_DIV1),
+ SAVE_ITEM(S5P_CLK_DIV2),
+ SAVE_ITEM(S5P_CLK_DIV3),
+ SAVE_ITEM(S5P_CLK_DIV4),
+ SAVE_ITEM(S5P_CLK_DIV5),
+ SAVE_ITEM(S5P_CLK_DIV6),
+ SAVE_ITEM(S5P_CLK_DIV7),
+
+ /* Clock Main Gate */
+ SAVE_ITEM(S5P_CLKGATE_MAIN0),
+ SAVE_ITEM(S5P_CLKGATE_MAIN1),
+ SAVE_ITEM(S5P_CLKGATE_MAIN2),
+
+ /* Clock source Peri Gate */
+ SAVE_ITEM(S5P_CLKGATE_PERI0),
+ SAVE_ITEM(S5P_CLKGATE_PERI1),
+
+ /* Clock source SCLK Gate */
+ SAVE_ITEM(S5P_CLKGATE_SCLK0),
+ SAVE_ITEM(S5P_CLKGATE_SCLK1),
+
+ /* Clock IP Clock gate */
+ SAVE_ITEM(S5P_CLKGATE_IP0),
+ SAVE_ITEM(S5P_CLKGATE_IP1),
+ SAVE_ITEM(S5P_CLKGATE_IP2),
+ SAVE_ITEM(S5P_CLKGATE_IP3),
+ SAVE_ITEM(S5P_CLKGATE_IP4),
+
+ /* Clock Blcok and Bus gate */
+ SAVE_ITEM(S5P_CLKGATE_BLOCK),
+ SAVE_ITEM(S5P_CLKGATE_BUS0),
+
+ /* Clock ETC */
+ SAVE_ITEM(S5P_CLK_OUT),
+ SAVE_ITEM(S5P_MDNIE_SEL),
+
+ /* PWM Register */
+ SAVE_ITEM(S3C2410_TCFG0),
+ SAVE_ITEM(S3C2410_TCFG1),
+ SAVE_ITEM(S3C64XX_TINT_CSTAT),
+ SAVE_ITEM(S3C2410_TCON),
+ SAVE_ITEM(S3C2410_TCNTB(0)),
+ SAVE_ITEM(S3C2410_TCMPB(0)),
+ SAVE_ITEM(S3C2410_TCNTO(0)),
+};
+
+void s5pv210_cpu_suspend(void)
+{
+ unsigned long tmp;
+
+ /* issue the standby signal into the pm unit. Note, we
+ * issue a write-buffer drain just in case */
+
+ tmp = 0;
+
+ asm("b 1f\n\t"
+ ".align 5\n\t"
+ "1:\n\t"
+ "mcr p15, 0, %0, c7, c10, 5\n\t"
+ "mcr p15, 0, %0, c7, c10, 4\n\t"
+ "wfi" : : "r" (tmp));
+
+ /* we should never get past here */
+ panic("sleep resumed to originator?");
+}
+
+static void s5pv210_pm_prepare(void)
+{
+ unsigned int tmp;
+
+ /* ensure at least INFORM0 has the resume address */
+ __raw_writel(virt_to_phys(s3c_cpu_resume), S5P_INFORM0);
+
+ tmp = __raw_readl(S5P_SLEEP_CFG);
+ tmp &= ~(S5P_SLEEP_CFG_OSC_EN | S5P_SLEEP_CFG_USBOSC_EN);
+ __raw_writel(tmp, S5P_SLEEP_CFG);
+
+ /* WFI for SLEEP mode configuration by SYSCON */
+ tmp = __raw_readl(S5P_PWR_CFG);
+ tmp &= S5P_CFG_WFI_CLEAN;
+ tmp |= S5P_CFG_WFI_SLEEP;
+ __raw_writel(tmp, S5P_PWR_CFG);
+
+ /* SYSCON interrupt handling disable */
+ tmp = __raw_readl(S5P_OTHERS);
+ tmp |= S5P_OTHER_SYSC_INTOFF;
+ __raw_writel(tmp, S5P_OTHERS);
+
+ s3c_pm_do_save(s5pv210_core_save, ARRAY_SIZE(s5pv210_core_save));
+}
+
+static int s5pv210_pm_add(struct sys_device *sysdev)
+{
+ pm_cpu_prep = s5pv210_pm_prepare;
+ pm_cpu_sleep = s5pv210_cpu_suspend;
+
+ return 0;
+}
+
+static int s5pv210_pm_resume(struct sys_device *dev)
+{
+ u32 tmp;
+
+ tmp = __raw_readl(S5P_OTHERS);
+ tmp |= (S5P_OTHERS_RET_IO | S5P_OTHERS_RET_CF |\
+ S5P_OTHERS_RET_MMC | S5P_OTHERS_RET_UART);
+ __raw_writel(tmp , S5P_OTHERS);
+
+ s3c_pm_do_restore_core(s5pv210_core_save, ARRAY_SIZE(s5pv210_core_save));
+
+ return 0;
+}
+
+static struct sysdev_driver s5pv210_pm_driver = {
+ .add = s5pv210_pm_add,
+ .resume = s5pv210_pm_resume,
+};
+
+static __init int s5pv210_pm_drvinit(void)
+{
+ return sysdev_driver_register(&s5pv210_sysclass, &s5pv210_pm_driver);
+}
+arch_initcall(s5pv210_pm_drvinit);
diff --git a/arch/arm/mach-s5pv210/setup-fb-24bpp.c b/arch/arm/mach-s5pv210/setup-fb-24bpp.c
index 928cf1f125f..e932ebfac56 100644
--- a/arch/arm/mach-s5pv210/setup-fb-24bpp.c
+++ b/arch/arm/mach-s5pv210/setup-fb-24bpp.c
@@ -21,33 +21,21 @@
#include <mach/regs-clock.h>
#include <plat/gpio-cfg.h>
-void s5pv210_fb_gpio_setup_24bpp(void)
+static void s5pv210_fb_cfg_gpios(unsigned int base, unsigned int nr)
{
- unsigned int gpio = 0;
-
- for (gpio = S5PV210_GPF0(0); gpio <= S5PV210_GPF0(7); gpio++) {
- s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
- s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
- s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
- }
+ s3c_gpio_cfgrange_nopull(base, nr, S3C_GPIO_SFN(2));
- for (gpio = S5PV210_GPF1(0); gpio <= S5PV210_GPF1(7); gpio++) {
- s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
- s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
- s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
- }
+ for (; nr > 0; nr--, base++)
+ s5p_gpio_set_drvstr(base, S5P_GPIO_DRVSTR_LV4);
+}
- for (gpio = S5PV210_GPF2(0); gpio <= S5PV210_GPF2(7); gpio++) {
- s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
- s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
- s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
- }
- for (gpio = S5PV210_GPF3(0); gpio <= S5PV210_GPF3(3); gpio++) {
- s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
- s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
- s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
- }
+void s5pv210_fb_gpio_setup_24bpp(void)
+{
+ s5pv210_fb_cfg_gpios(S5PV210_GPF0(0), 8);
+ s5pv210_fb_cfg_gpios(S5PV210_GPF1(0), 8);
+ s5pv210_fb_cfg_gpios(S5PV210_GPF2(0), 8);
+ s5pv210_fb_cfg_gpios(S5PV210_GPF3(0), 4);
/* Set DISPLAY_CONTROL register for Display path selection.
*
diff --git a/arch/arm/mach-s5pv210/setup-i2c0.c b/arch/arm/mach-s5pv210/setup-i2c0.c
index d38f7cb7e66..0f1cc3a1c1e 100644
--- a/arch/arm/mach-s5pv210/setup-i2c0.c
+++ b/arch/arm/mach-s5pv210/setup-i2c0.c
@@ -23,8 +23,6 @@ struct platform_device; /* don't need the contents */
void s3c_i2c0_cfg_gpio(struct platform_device *dev)
{
- s3c_gpio_cfgpin(S5PV210_GPD1(0), S3C_GPIO_SFN(2));
- s3c_gpio_setpull(S5PV210_GPD1(0), S3C_GPIO_PULL_UP);
- s3c_gpio_cfgpin(S5PV210_GPD1(1), S3C_GPIO_SFN(2));
- s3c_gpio_setpull(S5PV210_GPD1(1), S3C_GPIO_PULL_UP);
+ s3c_gpio_cfgall_range(S5PV210_GPD1(0), 2,
+ S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
}
diff --git a/arch/arm/mach-s5pv210/setup-i2c1.c b/arch/arm/mach-s5pv210/setup-i2c1.c
index 148bb7857d8..f61365a34c5 100644
--- a/arch/arm/mach-s5pv210/setup-i2c1.c
+++ b/arch/arm/mach-s5pv210/setup-i2c1.c
@@ -23,8 +23,6 @@ struct platform_device; /* don't need the contents */
void s3c_i2c1_cfg_gpio(struct platform_device *dev)
{
- s3c_gpio_cfgpin(S5PV210_GPD1(2), S3C_GPIO_SFN(2));
- s3c_gpio_setpull(S5PV210_GPD1(2), S3C_GPIO_PULL_UP);
- s3c_gpio_cfgpin(S5PV210_GPD1(3), S3C_GPIO_SFN(2));
- s3c_gpio_setpull(S5PV210_GPD1(3), S3C_GPIO_PULL_UP);
+ s3c_gpio_cfgall_range(S5PV210_GPD1(2), 2,
+ S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
}
diff --git a/arch/arm/mach-s5pv210/setup-i2c2.c b/arch/arm/mach-s5pv210/setup-i2c2.c
index 2396cb8c373..2f91b5cefbc 100644
--- a/arch/arm/mach-s5pv210/setup-i2c2.c
+++ b/arch/arm/mach-s5pv210/setup-i2c2.c
@@ -23,8 +23,6 @@ struct platform_device; /* don't need the contents */
void s3c_i2c2_cfg_gpio(struct platform_device *dev)
{
- s3c_gpio_cfgpin(S5PV210_GPD1(4), S3C_GPIO_SFN(2));
- s3c_gpio_setpull(S5PV210_GPD1(4), S3C_GPIO_PULL_UP);
- s3c_gpio_cfgpin(S5PV210_GPD1(5), S3C_GPIO_SFN(2));
- s3c_gpio_setpull(S5PV210_GPD1(5), S3C_GPIO_PULL_UP);
+ s3c_gpio_cfgall_range(S5PV210_GPD1(4), 2,
+ S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
}
diff --git a/arch/arm/mach-s5pv210/setup-ide.c b/arch/arm/mach-s5pv210/setup-ide.c
index b558b1cc8d6..ea123d546bd 100644
--- a/arch/arm/mach-s5pv210/setup-ide.c
+++ b/arch/arm/mach-s5pv210/setup-ide.c
@@ -15,36 +15,25 @@
#include <plat/gpio-cfg.h>
+static void s5pv210_ide_cfg_gpios(unsigned int base, unsigned int nr)
+{
+ s3c_gpio_cfgrange_nopull(base, nr, S3C_GPIO_SFN(4));
+
+ for (; nr > 0; nr--, base++)
+ s5p_gpio_set_drvstr(base, S5P_GPIO_DRVSTR_LV4);
+}
+
void s5pv210_ide_setup_gpio(void)
{
- unsigned int gpio = 0;
-
- for (gpio = S5PV210_GPJ0(0); gpio <= S5PV210_GPJ0(7); gpio++) {
- /* CF_Add[0 - 2], CF_IORDY, CF_INTRQ, CF_DMARQ, CF_DMARST,
- CF_DMACK */
- s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(4));
- s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
- s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
- }
-
- for (gpio = S5PV210_GPJ2(0); gpio <= S5PV210_GPJ2(7); gpio++) {
- /*CF_Data[0 - 7] */
- s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(4));
- s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
- s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
- }
-
- for (gpio = S5PV210_GPJ3(0); gpio <= S5PV210_GPJ3(7); gpio++) {
- /* CF_Data[8 - 15] */
- s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(4));
- s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
- s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
- }
-
- for (gpio = S5PV210_GPJ4(0); gpio <= S5PV210_GPJ4(3); gpio++) {
- /* CF_CS0, CF_CS1, CF_IORD, CF_IOWR */
- s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(4));
- s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
- s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
- }
+ /* CF_Add[0 - 2], CF_IORDY, CF_INTRQ, CF_DMARQ, CF_DMARST, CF_DMACK */
+ s5pv210_ide_cfg_gpios(S5PV210_GPJ0(0), 8);
+
+ /* CF_Data[0 - 7] */
+ s5pv210_ide_cfg_gpios(S5PV210_GPJ2(0), 8);
+
+ /* CF_Data[8 - 15] */
+ s5pv210_ide_cfg_gpios(S5PV210_GPJ3(0), 8);
+
+ /* CF_CS0, CF_CS1, CF_IORD, CF_IOWR */
+ s5pv210_ide_cfg_gpios(S5PV210_GPJ4(0), 4);
}
diff --git a/arch/arm/mach-s5pv210/setup-keypad.c b/arch/arm/mach-s5pv210/setup-keypad.c
index 37b2790aafc..c56420a52f4 100644
--- a/arch/arm/mach-s5pv210/setup-keypad.c
+++ b/arch/arm/mach-s5pv210/setup-keypad.c
@@ -16,19 +16,9 @@
void samsung_keypad_cfg_gpio(unsigned int rows, unsigned int cols)
{
- unsigned int gpio, end;
-
/* Set all the necessary GPH3 pins to special-function 3: KP_ROW[x] */
- end = S5PV210_GPH3(rows);
- for (gpio = S5PV210_GPH3(0); gpio < end; gpio++) {
- s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(3));
- s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
- }
+ s3c_gpio_cfgrange_nopull(S5PV210_GPH3(0), rows, S3C_GPIO_SFN(3));
/* Set all the necessary GPH2 pins to special-function 3: KP_COL[x] */
- end = S5PV210_GPH2(cols);
- for (gpio = S5PV210_GPH2(0); gpio < end; gpio++) {
- s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(3));
- s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
- }
+ s3c_gpio_cfgrange_nopull(S5PV210_GPH2(0), cols, S3C_GPIO_SFN(3));
}
diff --git a/arch/arm/mach-s5pv210/setup-sdhci-gpio.c b/arch/arm/mach-s5pv210/setup-sdhci-gpio.c
index b18587b1ec5..746777d56df 100644
--- a/arch/arm/mach-s5pv210/setup-sdhci-gpio.c
+++ b/arch/arm/mach-s5pv210/setup-sdhci-gpio.c
@@ -26,26 +26,17 @@
void s5pv210_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width)
{
struct s3c_sdhci_platdata *pdata = dev->dev.platform_data;
- unsigned int gpio;
/* Set all the necessary GPG0/GPG1 pins to special-function 2 */
- for (gpio = S5PV210_GPG0(0); gpio < S5PV210_GPG0(2); gpio++) {
- s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
- s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
- }
+ s3c_gpio_cfgrange_nopull(S5PV210_GPG0(0), 2, S3C_GPIO_SFN(2));
+
switch (width) {
case 8:
/* GPG1[3:6] special-funtion 3 */
- for (gpio = S5PV210_GPG1(3); gpio <= S5PV210_GPG1(6); gpio++) {
- s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(3));
- s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
- }
+ s3c_gpio_cfgrange_nopull(S5PV210_GPG1(3), 4, S3C_GPIO_SFN(3));
case 4:
/* GPG0[3:6] special-funtion 2 */
- for (gpio = S5PV210_GPG0(3); gpio <= S5PV210_GPG0(6); gpio++) {
- s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
- s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
- }
+ s3c_gpio_cfgrange_nopull(S5PV210_GPG0(3), 4, S3C_GPIO_SFN(2));
default:
break;
}
@@ -59,19 +50,12 @@ void s5pv210_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width)
void s5pv210_setup_sdhci1_cfg_gpio(struct platform_device *dev, int width)
{
struct s3c_sdhci_platdata *pdata = dev->dev.platform_data;
- unsigned int gpio;
/* Set all the necessary GPG1[0:1] pins to special-function 2 */
- for (gpio = S5PV210_GPG1(0); gpio < S5PV210_GPG1(2); gpio++) {
- s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
- s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
- }
+ s3c_gpio_cfgrange_nopull(S5PV210_GPG1(0), 2, S3C_GPIO_SFN(2));
/* Data pin GPG1[3:6] to special-function 2 */
- for (gpio = S5PV210_GPG1(3); gpio <= S5PV210_GPG1(6); gpio++) {
- s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
- s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
- }
+ s3c_gpio_cfgrange_nopull(S5PV210_GPG1(3), 4, S3C_GPIO_SFN(2));
if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) {
s3c_gpio_setpull(S5PV210_GPG1(2), S3C_GPIO_PULL_UP);
@@ -82,27 +66,17 @@ void s5pv210_setup_sdhci1_cfg_gpio(struct platform_device *dev, int width)
void s5pv210_setup_sdhci2_cfg_gpio(struct platform_device *dev, int width)
{
struct s3c_sdhci_platdata *pdata = dev->dev.platform_data;
- unsigned int gpio;
/* Set all the necessary GPG2[0:1] pins to special-function 2 */
- for (gpio = S5PV210_GPG2(0); gpio < S5PV210_GPG2(2); gpio++) {
- s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
- s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
- }
+ s3c_gpio_cfgrange_nopull(S5PV210_GPG2(0), 2, S3C_GPIO_SFN(2));
switch (width) {
case 8:
/* Data pin GPG3[3:6] to special-function 3 */
- for (gpio = S5PV210_GPG3(3); gpio <= S5PV210_GPG3(6); gpio++) {
- s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(3));
- s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
- }
+ s3c_gpio_cfgrange_nopull(S5PV210_GPG3(3), 4, S3C_GPIO_SFN(3));
case 4:
/* Data pin GPG2[3:6] to special-function 2 */
- for (gpio = S5PV210_GPG2(3); gpio <= S5PV210_GPG2(6); gpio++) {
- s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
- s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
- }
+ s3c_gpio_cfgrange_nopull(S5PV210_GPG2(3), 4, S3C_GPIO_SFN(2));
default:
break;
}
@@ -116,19 +90,12 @@ void s5pv210_setup_sdhci2_cfg_gpio(struct platform_device *dev, int width)
void s5pv210_setup_sdhci3_cfg_gpio(struct platform_device *dev, int width)
{
struct s3c_sdhci_platdata *pdata = dev->dev.platform_data;
- unsigned int gpio;
- /* Set all the necessary GPG3[0:2] pins to special-function 2 */
- for (gpio = S5PV210_GPG3(0); gpio < S5PV210_GPG3(2); gpio++) {
- s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
- s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
- }
+ /* Set all the necessary GPG3[0:1] pins to special-function 2 */
+ s3c_gpio_cfgrange_nopull(S5PV210_GPG3(0), 2, S3C_GPIO_SFN(2));
/* Data pin GPG3[3:6] to special-function 2 */
- for (gpio = S5PV210_GPG3(3); gpio <= S5PV210_GPG3(6); gpio++) {
- s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
- s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
- }
+ s3c_gpio_cfgrange_nopull(S5PV210_GPG3(3), 4, S3C_GPIO_SFN(2));
if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) {
s3c_gpio_setpull(S5PV210_GPG3(2), S3C_GPIO_PULL_UP);
diff --git a/arch/arm/mach-s5pv210/sleep.S b/arch/arm/mach-s5pv210/sleep.S
new file mode 100644
index 00000000000..d4d222b716b
--- /dev/null
+++ b/arch/arm/mach-s5pv210/sleep.S
@@ -0,0 +1,170 @@
+/* linux/arch/arm/plat-s5p/sleep.S
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * S5PV210 power Manager (Suspend-To-RAM) support
+ * Based on S3C2410 sleep code by:
+ * Ben Dooks, (c) 2004 Simtec Electronics
+ *
+ * Based on PXA/SA1100 sleep code by:
+ * Nicolas Pitre, (c) 2002 Monta Vista Software Inc
+ * Cliff Brake, (c) 2001
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+*/
+
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+#include <asm/memory.h>
+
+ .text
+
+ /* s3c_cpu_save
+ *
+ * entry:
+ * r0 = save address (virtual addr of s3c_sleep_save_phys)
+ */
+
+ENTRY(s3c_cpu_save)
+
+ stmfd sp!, { r3 - r12, lr }
+
+ mrc p15, 0, r4, c13, c0, 0 @ FCSE/PID
+ mrc p15, 0, r5, c3, c0, 0 @ Domain ID
+ mrc p15, 0, r6, c2, c0, 0 @ Translation Table BASE0
+ mrc p15, 0, r7, c2, c0, 1 @ Translation Table BASE1
+ mrc p15, 0, r8, c2, c0, 2 @ Translation Table Control
+ mrc p15, 0, r9, c1, c0, 0 @ Control register
+ mrc p15, 0, r10, c1, c0, 1 @ Auxiliary control register
+ mrc p15, 0, r11, c1, c0, 2 @ Co-processor access controls
+ mrc p15, 0, r12, c10, c2, 0 @ Read PRRR
+ mrc p15, 0, r3, c10, c2, 1 @ READ NMRR
+
+ stmia r0, { r3 - r13 }
+
+ bl s3c_pm_cb_flushcache
+
+ ldr r0, =pm_cpu_sleep
+ ldr r0, [ r0 ]
+ mov pc, r0
+
+resume_with_mmu:
+ /*
+ * After MMU is turned on, restore the previous MMU table.
+ */
+ ldr r9 , =(PAGE_OFFSET - PHYS_OFFSET)
+ add r4, r4, r9
+ str r12, [r4]
+
+ ldmfd sp!, { r3 - r12, pc }
+
+ .ltorg
+
+ .data
+
+ .global s3c_sleep_save_phys
+s3c_sleep_save_phys:
+ .word 0
+
+ /* sleep magic, to allow the bootloader to check for an valid
+ * image to resume to. Must be the first word before the
+ * s3c_cpu_resume entry.
+ */
+
+ .word 0x2bedf00d
+
+ /* s3c_cpu_resume
+ *
+ * resume code entry for bootloader to call
+ *
+ * we must put this code here in the data segment as we have no
+ * other way of restoring the stack pointer after sleep, and we
+ * must not write to the code segment (code is read-only)
+ */
+
+ENTRY(s3c_cpu_resume)
+ mov r0, #PSR_I_BIT | PSR_F_BIT | SVC_MODE
+ msr cpsr_c, r0
+
+ mov r1, #0
+ mcr p15, 0, r1, c8, c7, 0 @ invalidate TLBs
+ mcr p15, 0, r1, c7, c5, 0 @ invalidate I Cache
+
+ ldr r0, s3c_sleep_save_phys @ address of restore block
+ ldmia r0, { r3 - r13 }
+
+ mcr p15, 0, r4, c13, c0, 0 @ FCSE/PID
+ mcr p15, 0, r5, c3, c0, 0 @ Domain ID
+
+ mcr p15, 0, r8, c2, c0, 2 @ Translation Table Control
+ mcr p15, 0, r7, c2, c0, 1 @ Translation Table BASE1
+ mcr p15, 0, r6, c2, c0, 0 @ Translation Table BASE0
+
+ mcr p15, 0, r10, c1, c0, 1 @ Auxiliary control register
+
+ mov r0, #0
+ mcr p15, 0, r0, c8, c7, 0 @ Invalidate I & D TLB
+
+ mov r0, #0 @ restore copro access
+ mcr p15, 0, r11, c1, c0, 2 @ Co-processor access
+ mcr p15, 0, r0, c7, c5, 4
+
+ mcr p15, 0, r12, c10, c2, 0 @ write PRRR
+ mcr p15, 0, r3, c10, c2, 1 @ write NMRR
+
+ /*
+ * In Cortex-A8, when MMU is turned on, the pipeline is flushed.
+ * And there are no valid entries in the MMU table at this point.
+ * So before turning on the MMU, the MMU entry for the DRAM address
+ * range is added. After the MMU is turned on, the other entries
+ * in the MMU table will be restored.
+ */
+
+ /* r6 = Translation Table BASE0 */
+ mov r4, r6
+ mov r4, r4, LSR #14
+ mov r4, r4, LSL #14
+
+ /* Load address for adding to MMU table list */
+ ldr r11, =0xE010F000 @ INFORM0 reg.
+ ldr r10, [r11, #0]
+ mov r10, r10, LSR #18
+ bic r10, r10, #0x3
+ orr r4, r4, r10
+
+ /* Calculate MMU table entry */
+ mov r10, r10, LSL #18
+ ldr r5, =0x40E
+ orr r10, r10, r5
+
+ /* Back up originally data */
+ ldr r12, [r4]
+
+ /* Add calculated MMU table entry into MMU table list */
+ str r10, [r4]
+
+ ldr r2, =resume_with_mmu
+ mcr p15, 0, r9, c1, c0, 0 @ turn on MMU, etc
+
+ nop
+ nop
+ nop
+ nop
+ nop @ second-to-last before mmu
+
+ mov pc, r2 @ go back to virtual address
+
+ .ltorg
diff --git a/arch/arm/mach-s5pv310/Kconfig b/arch/arm/mach-s5pv310/Kconfig
index 331b5bd97ab..1150b360f38 100644
--- a/arch/arm/mach-s5pv310/Kconfig
+++ b/arch/arm/mach-s5pv310/Kconfig
@@ -11,7 +11,6 @@ if ARCH_S5PV310
config CPU_S5PV310
bool
- select PLAT_S5P
help
Enable S5PV310 CPU support
@@ -25,21 +24,105 @@ config S5PV310_SETUP_I2C2
help
Common setup code for i2c bus 2.
+config S5PV310_SETUP_I2C3
+ bool
+ help
+ Common setup code for i2c bus 3.
+
+config S5PV310_SETUP_I2C4
+ bool
+ help
+ Common setup code for i2c bus 4.
+
+config S5PV310_SETUP_I2C5
+ bool
+ help
+ Common setup code for i2c bus 5.
+
+config S5PV310_SETUP_I2C6
+ bool
+ help
+ Common setup code for i2c bus 6.
+
+config S5PV310_SETUP_I2C7
+ bool
+ help
+ Common setup code for i2c bus 7.
+
+config S5PV310_SETUP_SDHCI
+ bool
+ select S5PV310_SETUP_SDHCI_GPIO
+ help
+ Internal helper functions for S5PV310 based SDHCI systems.
+
+config S5PV310_SETUP_SDHCI_GPIO
+ bool
+ help
+ Common setup code for SDHCI gpio.
+
# machine support
-config MACH_SMDKV310
- bool "SMDKV310"
+menu "S5PC210 Machines"
+
+config MACH_SMDKC210
+ bool "SMDKC210"
select CPU_S5PV310
- select ARCH_SPARSEMEM_ENABLE
+ select S3C_DEV_RTC
+ select S3C_DEV_WDT
+ select S3C_DEV_HSMMC
+ select S3C_DEV_HSMMC1
+ select S3C_DEV_HSMMC2
+ select S3C_DEV_HSMMC3
+ select S5PV310_SETUP_SDHCI
help
- Machine support for Samsung SMDKV310
+ Machine support for Samsung SMDKC210
+ S5PC210(MCP) is one of package option of S5PV310
config MACH_UNIVERSAL_C210
bool "Mobile UNIVERSAL_C210 Board"
select CPU_S5PV310
- select ARCH_SPARSEMEM_ENABLE
+ select S5P_DEV_ONENAND
+ select S3C_DEV_I2C1
+ select S5PV310_SETUP_I2C1
help
Machine support for Samsung Mobile Universal S5PC210 Reference
Board. S5PC210(MCP) is one of package option of S5PV310
+endmenu
+
+menu "S5PV310 Machines"
+
+config MACH_SMDKV310
+ bool "SMDKV310"
+ select CPU_S5PV310
+ select S3C_DEV_RTC
+ select S3C_DEV_WDT
+ select S3C_DEV_HSMMC
+ select S3C_DEV_HSMMC1
+ select S3C_DEV_HSMMC2
+ select S3C_DEV_HSMMC3
+ select S5PV310_SETUP_SDHCI
+ help
+ Machine support for Samsung SMDKV310
+
+endmenu
+
+comment "Configuration for HSMMC bus width"
+
+menu "Use 8-bit bus width"
+
+config S5PV310_SDHCI_CH0_8BIT
+ bool "Channel 0 with 8-bit bus"
+ help
+ Support HSMMC Channel 0 8-bit bus.
+ If selected, Channel 1 is disabled.
+
+config S5PV310_SDHCI_CH2_8BIT
+ bool "Channel 2 with 8-bit bus"
+ help
+ Support HSMMC Channel 2 8-bit bus.
+ If selected, Channel 3 is disabled.
+
+endmenu
+
endif
diff --git a/arch/arm/mach-s5pv310/Makefile b/arch/arm/mach-s5pv310/Makefile
index d5b51c72340..84afc64e7c0 100644
--- a/arch/arm/mach-s5pv310/Makefile
+++ b/arch/arm/mach-s5pv310/Makefile
@@ -13,7 +13,7 @@ obj- :=
# Core support for S5PV310 system
obj-$(CONFIG_CPU_S5PV310) += cpu.o init.o clock.o irq-combiner.o
-obj-$(CONFIG_CPU_S5PV310) += setup-i2c0.o time.o
+obj-$(CONFIG_CPU_S5PV310) += setup-i2c0.o time.o gpiolib.o irq-eint.o
obj-$(CONFIG_SMP) += platsmp.o headsmp.o
obj-$(CONFIG_LOCAL_TIMERS) += localtimer.o
@@ -21,6 +21,7 @@ obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
# machine support
+obj-$(CONFIG_MACH_SMDKC210) += mach-smdkc210.o
obj-$(CONFIG_MACH_SMDKV310) += mach-smdkv310.o
obj-$(CONFIG_MACH_UNIVERSAL_C210) += mach-universal_c210.o
@@ -28,3 +29,10 @@ obj-$(CONFIG_MACH_UNIVERSAL_C210) += mach-universal_c210.o
obj-$(CONFIG_S5PV310_SETUP_I2C1) += setup-i2c1.o
obj-$(CONFIG_S5PV310_SETUP_I2C2) += setup-i2c2.o
+obj-$(CONFIG_S5PV310_SETUP_I2C3) += setup-i2c3.o
+obj-$(CONFIG_S5PV310_SETUP_I2C4) += setup-i2c4.o
+obj-$(CONFIG_S5PV310_SETUP_I2C5) += setup-i2c5.o
+obj-$(CONFIG_S5PV310_SETUP_I2C6) += setup-i2c6.o
+obj-$(CONFIG_S5PV310_SETUP_I2C7) += setup-i2c7.o
+obj-$(CONFIG_S5PV310_SETUP_SDHCI) += setup-sdhci.o
+obj-$(CONFIG_S5PV310_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o
diff --git a/arch/arm/mach-s5pv310/clock.c b/arch/arm/mach-s5pv310/clock.c
index 26a0f03df8e..58c9d33f36f 100644
--- a/arch/arm/mach-s5pv310/clock.c
+++ b/arch/arm/mach-s5pv310/clock.c
@@ -30,16 +30,92 @@ static struct clk clk_sclk_hdmi27m = {
.rate = 27000000,
};
+static struct clk clk_sclk_hdmiphy = {
+ .name = "sclk_hdmiphy",
+ .id = -1,
+};
+
+static struct clk clk_sclk_usbphy0 = {
+ .name = "sclk_usbphy0",
+ .id = -1,
+ .rate = 27000000,
+};
+
+static struct clk clk_sclk_usbphy1 = {
+ .name = "sclk_usbphy1",
+ .id = -1,
+};
+
+static int s5pv310_clksrc_mask_top_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(S5P_CLKSRC_MASK_TOP, clk, enable);
+}
+
+static int s5pv310_clksrc_mask_cam_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(S5P_CLKSRC_MASK_CAM, clk, enable);
+}
+
+static int s5pv310_clksrc_mask_lcd0_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(S5P_CLKSRC_MASK_LCD0, clk, enable);
+}
+
+static int s5pv310_clksrc_mask_lcd1_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(S5P_CLKSRC_MASK_LCD1, clk, enable);
+}
+
+static int s5pv310_clksrc_mask_fsys_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(S5P_CLKSRC_MASK_FSYS, clk, enable);
+}
+
static int s5pv310_clksrc_mask_peril0_ctrl(struct clk *clk, int enable)
{
return s5p_gatectrl(S5P_CLKSRC_MASK_PERIL0, clk, enable);
}
+static int s5pv310_clksrc_mask_peril1_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(S5P_CLKSRC_MASK_PERIL1, clk, enable);
+}
+
+static int s5pv310_clk_ip_cam_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(S5P_CLKGATE_IP_CAM, clk, enable);
+}
+
+static int s5pv310_clk_ip_image_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(S5P_CLKGATE_IP_IMAGE, clk, enable);
+}
+
+static int s5pv310_clk_ip_lcd0_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(S5P_CLKGATE_IP_LCD0, clk, enable);
+}
+
+static int s5pv310_clk_ip_lcd1_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(S5P_CLKGATE_IP_LCD1, clk, enable);
+}
+
+static int s5pv310_clk_ip_fsys_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(S5P_CLKGATE_IP_FSYS, clk, enable);
+}
+
static int s5pv310_clk_ip_peril_ctrl(struct clk *clk, int enable)
{
return s5p_gatectrl(S5P_CLKGATE_IP_PERIL, clk, enable);
}
+static int s5pv310_clk_ip_perir_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(S5P_CLKGATE_IP_PERIR, clk, enable);
+}
+
/* Core list of CMU_CPU side */
static struct clksrc_clk clk_mout_apll = {
@@ -79,7 +155,7 @@ static struct clksrc_clk clk_mout_mpll = {
};
static struct clk *clkset_moutcore_list[] = {
- [0] = &clk_sclk_apll.clk,
+ [0] = &clk_mout_apll.clk,
[1] = &clk_mout_mpll.clk,
};
@@ -150,24 +226,6 @@ static struct clksrc_clk clk_periphclk = {
.reg_div = { .reg = S5P_CLKDIV_CPU, .shift = 12, .size = 3 },
};
-static struct clksrc_clk clk_atclk = {
- .clk = {
- .name = "atclk",
- .id = -1,
- .parent = &clk_moutcore.clk,
- },
- .reg_div = { .reg = S5P_CLKDIV_CPU, .shift = 16, .size = 3 },
-};
-
-static struct clksrc_clk clk_pclk_dbg = {
- .clk = {
- .name = "pclk_dbg",
- .id = -1,
- .parent = &clk_atclk.clk,
- },
- .reg_div = { .reg = S5P_CLKDIV_CPU, .shift = 20, .size = 3 },
-};
-
/* Core list of CMU_CORE side */
static struct clk *clkset_corebus_list[] = {
@@ -241,7 +299,7 @@ static struct clk *clkset_aclk_top_list[] = {
[1] = &clk_sclk_apll.clk,
};
-static struct clksrc_sources clkset_aclk_200 = {
+static struct clksrc_sources clkset_aclk = {
.sources = clkset_aclk_top_list,
.nr_sources = ARRAY_SIZE(clkset_aclk_top_list),
};
@@ -251,52 +309,37 @@ static struct clksrc_clk clk_aclk_200 = {
.name = "aclk_200",
.id = -1,
},
- .sources = &clkset_aclk_200,
+ .sources = &clkset_aclk,
.reg_src = { .reg = S5P_CLKSRC_TOP0, .shift = 12, .size = 1 },
.reg_div = { .reg = S5P_CLKDIV_TOP, .shift = 0, .size = 3 },
};
-static struct clksrc_sources clkset_aclk_100 = {
- .sources = clkset_aclk_top_list,
- .nr_sources = ARRAY_SIZE(clkset_aclk_top_list),
-};
-
static struct clksrc_clk clk_aclk_100 = {
.clk = {
.name = "aclk_100",
.id = -1,
},
- .sources = &clkset_aclk_100,
+ .sources = &clkset_aclk,
.reg_src = { .reg = S5P_CLKSRC_TOP0, .shift = 16, .size = 1 },
.reg_div = { .reg = S5P_CLKDIV_TOP, .shift = 4, .size = 4 },
};
-static struct clksrc_sources clkset_aclk_160 = {
- .sources = clkset_aclk_top_list,
- .nr_sources = ARRAY_SIZE(clkset_aclk_top_list),
-};
-
static struct clksrc_clk clk_aclk_160 = {
.clk = {
.name = "aclk_160",
.id = -1,
},
- .sources = &clkset_aclk_160,
+ .sources = &clkset_aclk,
.reg_src = { .reg = S5P_CLKSRC_TOP0, .shift = 20, .size = 1 },
.reg_div = { .reg = S5P_CLKDIV_TOP, .shift = 8, .size = 3 },
};
-static struct clksrc_sources clkset_aclk_133 = {
- .sources = clkset_aclk_top_list,
- .nr_sources = ARRAY_SIZE(clkset_aclk_top_list),
-};
-
static struct clksrc_clk clk_aclk_133 = {
.clk = {
.name = "aclk_133",
.id = -1,
},
- .sources = &clkset_aclk_133,
+ .sources = &clkset_aclk,
.reg_src = { .reg = S5P_CLKSRC_TOP0, .shift = 24, .size = 1 },
.reg_div = { .reg = S5P_CLKDIV_TOP, .shift = 12, .size = 3 },
};
@@ -315,6 +358,8 @@ static struct clksrc_clk clk_vpllsrc = {
.clk = {
.name = "vpll_src",
.id = -1,
+ .enable = s5pv310_clksrc_mask_top_ctrl,
+ .ctrlbit = (1 << 0),
},
.sources = &clkset_vpllsrc,
.reg_src = { .reg = S5P_CLKSRC_TOP1, .shift = 0, .size = 1 },
@@ -346,7 +391,175 @@ static struct clk init_clocks_disable[] = {
.parent = &clk_aclk_100.clk,
.enable = s5pv310_clk_ip_peril_ctrl,
.ctrlbit = (1<<24),
- }
+ }, {
+ .name = "csis",
+ .id = 0,
+ .enable = s5pv310_clk_ip_cam_ctrl,
+ .ctrlbit = (1 << 4),
+ }, {
+ .name = "csis",
+ .id = 1,
+ .enable = s5pv310_clk_ip_cam_ctrl,
+ .ctrlbit = (1 << 5),
+ }, {
+ .name = "fimc",
+ .id = 0,
+ .enable = s5pv310_clk_ip_cam_ctrl,
+ .ctrlbit = (1 << 0),
+ }, {
+ .name = "fimc",
+ .id = 1,
+ .enable = s5pv310_clk_ip_cam_ctrl,
+ .ctrlbit = (1 << 1),
+ }, {
+ .name = "fimc",
+ .id = 2,
+ .enable = s5pv310_clk_ip_cam_ctrl,
+ .ctrlbit = (1 << 2),
+ }, {
+ .name = "fimc",
+ .id = 3,
+ .enable = s5pv310_clk_ip_cam_ctrl,
+ .ctrlbit = (1 << 3),
+ }, {
+ .name = "fimd",
+ .id = 0,
+ .enable = s5pv310_clk_ip_lcd0_ctrl,
+ .ctrlbit = (1 << 0),
+ }, {
+ .name = "fimd",
+ .id = 1,
+ .enable = s5pv310_clk_ip_lcd1_ctrl,
+ .ctrlbit = (1 << 0),
+ }, {
+ .name = "hsmmc",
+ .id = 0,
+ .parent = &clk_aclk_133.clk,
+ .enable = s5pv310_clk_ip_fsys_ctrl,
+ .ctrlbit = (1 << 5),
+ }, {
+ .name = "hsmmc",
+ .id = 1,
+ .parent = &clk_aclk_133.clk,
+ .enable = s5pv310_clk_ip_fsys_ctrl,
+ .ctrlbit = (1 << 6),
+ }, {
+ .name = "hsmmc",
+ .id = 2,
+ .parent = &clk_aclk_133.clk,
+ .enable = s5pv310_clk_ip_fsys_ctrl,
+ .ctrlbit = (1 << 7),
+ }, {
+ .name = "hsmmc",
+ .id = 3,
+ .parent = &clk_aclk_133.clk,
+ .enable = s5pv310_clk_ip_fsys_ctrl,
+ .ctrlbit = (1 << 8),
+ }, {
+ .name = "hsmmc",
+ .id = 4,
+ .parent = &clk_aclk_133.clk,
+ .enable = s5pv310_clk_ip_fsys_ctrl,
+ .ctrlbit = (1 << 9),
+ }, {
+ .name = "sata",
+ .id = -1,
+ .enable = s5pv310_clk_ip_fsys_ctrl,
+ .ctrlbit = (1 << 10),
+ }, {
+ .name = "adc",
+ .id = -1,
+ .enable = s5pv310_clk_ip_peril_ctrl,
+ .ctrlbit = (1 << 15),
+ }, {
+ .name = "rtc",
+ .id = -1,
+ .enable = s5pv310_clk_ip_perir_ctrl,
+ .ctrlbit = (1 << 15),
+ }, {
+ .name = "watchdog",
+ .id = -1,
+ .enable = s5pv310_clk_ip_perir_ctrl,
+ .ctrlbit = (1 << 14),
+ }, {
+ .name = "usbhost",
+ .id = -1,
+ .enable = s5pv310_clk_ip_fsys_ctrl ,
+ .ctrlbit = (1 << 12),
+ }, {
+ .name = "otg",
+ .id = -1,
+ .enable = s5pv310_clk_ip_fsys_ctrl,
+ .ctrlbit = (1 << 13),
+ }, {
+ .name = "spi",
+ .id = 0,
+ .enable = s5pv310_clk_ip_peril_ctrl,
+ .ctrlbit = (1 << 16),
+ }, {
+ .name = "spi",
+ .id = 1,
+ .enable = s5pv310_clk_ip_peril_ctrl,
+ .ctrlbit = (1 << 17),
+ }, {
+ .name = "spi",
+ .id = 2,
+ .enable = s5pv310_clk_ip_peril_ctrl,
+ .ctrlbit = (1 << 18),
+ }, {
+ .name = "fimg2d",
+ .id = -1,
+ .enable = s5pv310_clk_ip_image_ctrl,
+ .ctrlbit = (1 << 0),
+ }, {
+ .name = "i2c",
+ .id = 0,
+ .parent = &clk_aclk_100.clk,
+ .enable = s5pv310_clk_ip_peril_ctrl,
+ .ctrlbit = (1 << 6),
+ }, {
+ .name = "i2c",
+ .id = 1,
+ .parent = &clk_aclk_100.clk,
+ .enable = s5pv310_clk_ip_peril_ctrl,
+ .ctrlbit = (1 << 7),
+ }, {
+ .name = "i2c",
+ .id = 2,
+ .parent = &clk_aclk_100.clk,
+ .enable = s5pv310_clk_ip_peril_ctrl,
+ .ctrlbit = (1 << 8),
+ }, {
+ .name = "i2c",
+ .id = 3,
+ .parent = &clk_aclk_100.clk,
+ .enable = s5pv310_clk_ip_peril_ctrl,
+ .ctrlbit = (1 << 9),
+ }, {
+ .name = "i2c",
+ .id = 4,
+ .parent = &clk_aclk_100.clk,
+ .enable = s5pv310_clk_ip_peril_ctrl,
+ .ctrlbit = (1 << 10),
+ }, {
+ .name = "i2c",
+ .id = 5,
+ .parent = &clk_aclk_100.clk,
+ .enable = s5pv310_clk_ip_peril_ctrl,
+ .ctrlbit = (1 << 11),
+ }, {
+ .name = "i2c",
+ .id = 6,
+ .parent = &clk_aclk_100.clk,
+ .enable = s5pv310_clk_ip_peril_ctrl,
+ .ctrlbit = (1 << 12),
+ }, {
+ .name = "i2c",
+ .id = 7,
+ .parent = &clk_aclk_100.clk,
+ .enable = s5pv310_clk_ip_peril_ctrl,
+ .ctrlbit = (1 << 13),
+ },
};
static struct clk init_clocks[] = {
@@ -387,6 +600,9 @@ static struct clk *clkset_group_list[] = {
[0] = &clk_ext_xtal_mux,
[1] = &clk_xusbxti,
[2] = &clk_sclk_hdmi27m,
+ [3] = &clk_sclk_usbphy0,
+ [4] = &clk_sclk_usbphy1,
+ [5] = &clk_sclk_hdmiphy,
[6] = &clk_mout_mpll.clk,
[7] = &clk_mout_epll.clk,
[8] = &clk_sclk_vpll.clk,
@@ -397,6 +613,104 @@ static struct clksrc_sources clkset_group = {
.nr_sources = ARRAY_SIZE(clkset_group_list),
};
+static struct clk *clkset_mout_g2d0_list[] = {
+ [0] = &clk_mout_mpll.clk,
+ [1] = &clk_sclk_apll.clk,
+};
+
+static struct clksrc_sources clkset_mout_g2d0 = {
+ .sources = clkset_mout_g2d0_list,
+ .nr_sources = ARRAY_SIZE(clkset_mout_g2d0_list),
+};
+
+static struct clksrc_clk clk_mout_g2d0 = {
+ .clk = {
+ .name = "mout_g2d0",
+ .id = -1,
+ },
+ .sources = &clkset_mout_g2d0,
+ .reg_src = { .reg = S5P_CLKSRC_IMAGE, .shift = 0, .size = 1 },
+};
+
+static struct clk *clkset_mout_g2d1_list[] = {
+ [0] = &clk_mout_epll.clk,
+ [1] = &clk_sclk_vpll.clk,
+};
+
+static struct clksrc_sources clkset_mout_g2d1 = {
+ .sources = clkset_mout_g2d1_list,
+ .nr_sources = ARRAY_SIZE(clkset_mout_g2d1_list),
+};
+
+static struct clksrc_clk clk_mout_g2d1 = {
+ .clk = {
+ .name = "mout_g2d1",
+ .id = -1,
+ },
+ .sources = &clkset_mout_g2d1,
+ .reg_src = { .reg = S5P_CLKSRC_IMAGE, .shift = 4, .size = 1 },
+};
+
+static struct clk *clkset_mout_g2d_list[] = {
+ [0] = &clk_mout_g2d0.clk,
+ [1] = &clk_mout_g2d1.clk,
+};
+
+static struct clksrc_sources clkset_mout_g2d = {
+ .sources = clkset_mout_g2d_list,
+ .nr_sources = ARRAY_SIZE(clkset_mout_g2d_list),
+};
+
+static struct clksrc_clk clk_dout_mmc0 = {
+ .clk = {
+ .name = "dout_mmc0",
+ .id = -1,
+ },
+ .sources = &clkset_group,
+ .reg_src = { .reg = S5P_CLKSRC_FSYS, .shift = 0, .size = 4 },
+ .reg_div = { .reg = S5P_CLKDIV_FSYS1, .shift = 0, .size = 4 },
+};
+
+static struct clksrc_clk clk_dout_mmc1 = {
+ .clk = {
+ .name = "dout_mmc1",
+ .id = -1,
+ },
+ .sources = &clkset_group,
+ .reg_src = { .reg = S5P_CLKSRC_FSYS, .shift = 4, .size = 4 },
+ .reg_div = { .reg = S5P_CLKDIV_FSYS1, .shift = 16, .size = 4 },
+};
+
+static struct clksrc_clk clk_dout_mmc2 = {
+ .clk = {
+ .name = "dout_mmc2",
+ .id = -1,
+ },
+ .sources = &clkset_group,
+ .reg_src = { .reg = S5P_CLKSRC_FSYS, .shift = 8, .size = 4 },
+ .reg_div = { .reg = S5P_CLKDIV_FSYS2, .shift = 0, .size = 4 },
+};
+
+static struct clksrc_clk clk_dout_mmc3 = {
+ .clk = {
+ .name = "dout_mmc3",
+ .id = -1,
+ },
+ .sources = &clkset_group,
+ .reg_src = { .reg = S5P_CLKSRC_FSYS, .shift = 12, .size = 4 },
+ .reg_div = { .reg = S5P_CLKDIV_FSYS2, .shift = 16, .size = 4 },
+};
+
+static struct clksrc_clk clk_dout_mmc4 = {
+ .clk = {
+ .name = "dout_mmc4",
+ .id = -1,
+ },
+ .sources = &clkset_group,
+ .reg_src = { .reg = S5P_CLKSRC_FSYS, .shift = 16, .size = 4 },
+ .reg_div = { .reg = S5P_CLKDIV_FSYS3, .shift = 0, .size = 4 },
+};
+
static struct clksrc_clk clksrcs[] = {
{
.clk = {
@@ -448,7 +762,200 @@ static struct clksrc_clk clksrcs[] = {
.sources = &clkset_group,
.reg_src = { .reg = S5P_CLKSRC_PERIL0, .shift = 24, .size = 4 },
.reg_div = { .reg = S5P_CLKDIV_PERIL3, .shift = 0, .size = 4 },
- },
+ }, {
+ .clk = {
+ .name = "sclk_csis",
+ .id = 0,
+ .enable = s5pv310_clksrc_mask_cam_ctrl,
+ .ctrlbit = (1 << 24),
+ },
+ .sources = &clkset_group,
+ .reg_src = { .reg = S5P_CLKSRC_CAM, .shift = 24, .size = 4 },
+ .reg_div = { .reg = S5P_CLKDIV_CAM, .shift = 24, .size = 4 },
+ }, {
+ .clk = {
+ .name = "sclk_csis",
+ .id = 1,
+ .enable = s5pv310_clksrc_mask_cam_ctrl,
+ .ctrlbit = (1 << 28),
+ },
+ .sources = &clkset_group,
+ .reg_src = { .reg = S5P_CLKSRC_CAM, .shift = 28, .size = 4 },
+ .reg_div = { .reg = S5P_CLKDIV_CAM, .shift = 28, .size = 4 },
+ }, {
+ .clk = {
+ .name = "sclk_cam",
+ .id = 0,
+ .enable = s5pv310_clksrc_mask_cam_ctrl,
+ .ctrlbit = (1 << 16),
+ },
+ .sources = &clkset_group,
+ .reg_src = { .reg = S5P_CLKSRC_CAM, .shift = 16, .size = 4 },
+ .reg_div = { .reg = S5P_CLKDIV_CAM, .shift = 16, .size = 4 },
+ }, {
+ .clk = {
+ .name = "sclk_cam",
+ .id = 1,
+ .enable = s5pv310_clksrc_mask_cam_ctrl,
+ .ctrlbit = (1 << 20),
+ },
+ .sources = &clkset_group,
+ .reg_src = { .reg = S5P_CLKSRC_CAM, .shift = 20, .size = 4 },
+ .reg_div = { .reg = S5P_CLKDIV_CAM, .shift = 20, .size = 4 },
+ }, {
+ .clk = {
+ .name = "sclk_fimc",
+ .id = 0,
+ .enable = s5pv310_clksrc_mask_cam_ctrl,
+ .ctrlbit = (1 << 0),
+ },
+ .sources = &clkset_group,
+ .reg_src = { .reg = S5P_CLKSRC_CAM, .shift = 0, .size = 4 },
+ .reg_div = { .reg = S5P_CLKDIV_CAM, .shift = 0, .size = 4 },
+ }, {
+ .clk = {
+ .name = "sclk_fimc",
+ .id = 1,
+ .enable = s5pv310_clksrc_mask_cam_ctrl,
+ .ctrlbit = (1 << 4),
+ },
+ .sources = &clkset_group,
+ .reg_src = { .reg = S5P_CLKSRC_CAM, .shift = 4, .size = 4 },
+ .reg_div = { .reg = S5P_CLKDIV_CAM, .shift = 4, .size = 4 },
+ }, {
+ .clk = {
+ .name = "sclk_fimc",
+ .id = 2,
+ .enable = s5pv310_clksrc_mask_cam_ctrl,
+ .ctrlbit = (1 << 8),
+ },
+ .sources = &clkset_group,
+ .reg_src = { .reg = S5P_CLKSRC_CAM, .shift = 8, .size = 4 },
+ .reg_div = { .reg = S5P_CLKDIV_CAM, .shift = 8, .size = 4 },
+ }, {
+ .clk = {
+ .name = "sclk_fimc",
+ .id = 3,
+ .enable = s5pv310_clksrc_mask_cam_ctrl,
+ .ctrlbit = (1 << 12),
+ },
+ .sources = &clkset_group,
+ .reg_src = { .reg = S5P_CLKSRC_CAM, .shift = 12, .size = 4 },
+ .reg_div = { .reg = S5P_CLKDIV_CAM, .shift = 12, .size = 4 },
+ }, {
+ .clk = {
+ .name = "sclk_fimd",
+ .id = 0,
+ .enable = s5pv310_clksrc_mask_lcd0_ctrl,
+ .ctrlbit = (1 << 0),
+ },
+ .sources = &clkset_group,
+ .reg_src = { .reg = S5P_CLKSRC_LCD0, .shift = 0, .size = 4 },
+ .reg_div = { .reg = S5P_CLKDIV_LCD0, .shift = 0, .size = 4 },
+ }, {
+ .clk = {
+ .name = "sclk_fimd",
+ .id = 1,
+ .enable = s5pv310_clksrc_mask_lcd1_ctrl,
+ .ctrlbit = (1 << 0),
+ },
+ .sources = &clkset_group,
+ .reg_src = { .reg = S5P_CLKSRC_LCD1, .shift = 0, .size = 4 },
+ .reg_div = { .reg = S5P_CLKDIV_LCD1, .shift = 0, .size = 4 },
+ }, {
+ .clk = {
+ .name = "sclk_sata",
+ .id = -1,
+ .enable = s5pv310_clksrc_mask_fsys_ctrl,
+ .ctrlbit = (1 << 24),
+ },
+ .sources = &clkset_mout_corebus,
+ .reg_src = { .reg = S5P_CLKSRC_FSYS, .shift = 24, .size = 1 },
+ .reg_div = { .reg = S5P_CLKDIV_FSYS0, .shift = 20, .size = 4 },
+ }, {
+ .clk = {
+ .name = "sclk_spi",
+ .id = 0,
+ .enable = s5pv310_clksrc_mask_peril1_ctrl,
+ .ctrlbit = (1 << 16),
+ },
+ .sources = &clkset_group,
+ .reg_src = { .reg = S5P_CLKSRC_PERIL1, .shift = 16, .size = 4 },
+ .reg_div = { .reg = S5P_CLKDIV_PERIL1, .shift = 0, .size = 4 },
+ }, {
+ .clk = {
+ .name = "sclk_spi",
+ .id = 1,
+ .enable = s5pv310_clksrc_mask_peril1_ctrl,
+ .ctrlbit = (1 << 20),
+ },
+ .sources = &clkset_group,
+ .reg_src = { .reg = S5P_CLKSRC_PERIL1, .shift = 20, .size = 4 },
+ .reg_div = { .reg = S5P_CLKDIV_PERIL1, .shift = 16, .size = 4 },
+ }, {
+ .clk = {
+ .name = "sclk_spi",
+ .id = 2,
+ .enable = s5pv310_clksrc_mask_peril1_ctrl,
+ .ctrlbit = (1 << 24),
+ },
+ .sources = &clkset_group,
+ .reg_src = { .reg = S5P_CLKSRC_PERIL1, .shift = 24, .size = 4 },
+ .reg_div = { .reg = S5P_CLKDIV_PERIL2, .shift = 0, .size = 4 },
+ }, {
+ .clk = {
+ .name = "sclk_fimg2d",
+ .id = -1,
+ },
+ .sources = &clkset_mout_g2d,
+ .reg_src = { .reg = S5P_CLKSRC_IMAGE, .shift = 8, .size = 1 },
+ .reg_div = { .reg = S5P_CLKDIV_IMAGE, .shift = 0, .size = 4 },
+ }, {
+ .clk = {
+ .name = "sclk_mmc",
+ .id = 0,
+ .parent = &clk_dout_mmc0.clk,
+ .enable = s5pv310_clksrc_mask_fsys_ctrl,
+ .ctrlbit = (1 << 0),
+ },
+ .reg_div = { .reg = S5P_CLKDIV_FSYS1, .shift = 8, .size = 8 },
+ }, {
+ .clk = {
+ .name = "sclk_mmc",
+ .id = 1,
+ .parent = &clk_dout_mmc1.clk,
+ .enable = s5pv310_clksrc_mask_fsys_ctrl,
+ .ctrlbit = (1 << 4),
+ },
+ .reg_div = { .reg = S5P_CLKDIV_FSYS1, .shift = 24, .size = 8 },
+ }, {
+ .clk = {
+ .name = "sclk_mmc",
+ .id = 2,
+ .parent = &clk_dout_mmc2.clk,
+ .enable = s5pv310_clksrc_mask_fsys_ctrl,
+ .ctrlbit = (1 << 8),
+ },
+ .reg_div = { .reg = S5P_CLKDIV_FSYS2, .shift = 8, .size = 8 },
+ }, {
+ .clk = {
+ .name = "sclk_mmc",
+ .id = 3,
+ .parent = &clk_dout_mmc3.clk,
+ .enable = s5pv310_clksrc_mask_fsys_ctrl,
+ .ctrlbit = (1 << 12),
+ },
+ .reg_div = { .reg = S5P_CLKDIV_FSYS2, .shift = 24, .size = 8 },
+ }, {
+ .clk = {
+ .name = "sclk_mmc",
+ .id = 4,
+ .parent = &clk_dout_mmc4.clk,
+ .enable = s5pv310_clksrc_mask_fsys_ctrl,
+ .ctrlbit = (1 << 16),
+ },
+ .reg_div = { .reg = S5P_CLKDIV_FSYS3, .shift = 8, .size = 8 },
+ }
};
/* Clock initialization code */
@@ -464,8 +971,6 @@ static struct clksrc_clk *sysclks[] = {
&clk_aclk_cores,
&clk_aclk_corem1,
&clk_periphclk,
- &clk_atclk,
- &clk_pclk_dbg,
&clk_mout_corebus,
&clk_sclk_dmc,
&clk_aclk_cored,
@@ -478,6 +983,11 @@ static struct clksrc_clk *sysclks[] = {
&clk_aclk_100,
&clk_aclk_160,
&clk_aclk_133,
+ &clk_dout_mmc0,
+ &clk_dout_mmc1,
+ &clk_dout_mmc2,
+ &clk_dout_mmc3,
+ &clk_dout_mmc4,
};
void __init_or_cpufreq s5pv310_setup_clocks(void)
@@ -490,15 +1000,11 @@ void __init_or_cpufreq s5pv310_setup_clocks(void)
unsigned long vpllsrc;
unsigned long xtal;
unsigned long armclk;
- unsigned long aclk_corem0;
- unsigned long aclk_cores;
- unsigned long aclk_corem1;
- unsigned long periphclk;
unsigned long sclk_dmc;
- unsigned long aclk_cored;
- unsigned long aclk_corep;
- unsigned long aclk_acp;
- unsigned long pclk_acp;
+ unsigned long aclk_200;
+ unsigned long aclk_100;
+ unsigned long aclk_160;
+ unsigned long aclk_133;
unsigned int ptr;
printk(KERN_DEBUG "%s: registering clocks\n", __func__);
@@ -529,26 +1035,21 @@ void __init_or_cpufreq s5pv310_setup_clocks(void)
apll, mpll, epll, vpll);
armclk = clk_get_rate(&clk_armclk.clk);
- aclk_corem0 = clk_get_rate(&clk_aclk_corem0.clk);
- aclk_cores = clk_get_rate(&clk_aclk_cores.clk);
- aclk_corem1 = clk_get_rate(&clk_aclk_corem1.clk);
- periphclk = clk_get_rate(&clk_periphclk.clk);
sclk_dmc = clk_get_rate(&clk_sclk_dmc.clk);
- aclk_cored = clk_get_rate(&clk_aclk_cored.clk);
- aclk_corep = clk_get_rate(&clk_aclk_corep.clk);
- aclk_acp = clk_get_rate(&clk_aclk_acp.clk);
- pclk_acp = clk_get_rate(&clk_pclk_acp.clk);
-
- printk(KERN_INFO "S5PV310: ARMCLK=%ld, COREM0=%ld, CORES=%ld\n"
- "COREM1=%ld, PERI=%ld, DMC=%ld, CORED=%ld\n"
- "COREP=%ld, ACLK_ACP=%ld, PCLK_ACP=%ld",
- armclk, aclk_corem0, aclk_cores, aclk_corem1,
- periphclk, sclk_dmc, aclk_cored, aclk_corep,
- aclk_acp, pclk_acp);
+
+ aclk_200 = clk_get_rate(&clk_aclk_200.clk);
+ aclk_100 = clk_get_rate(&clk_aclk_100.clk);
+ aclk_160 = clk_get_rate(&clk_aclk_160.clk);
+ aclk_133 = clk_get_rate(&clk_aclk_133.clk);
+
+ printk(KERN_INFO "S5PV310: ARMCLK=%ld, DMC=%ld, ACLK200=%ld\n"
+ "ACLK100=%ld, ACLK160=%ld, ACLK133=%ld\n",
+ armclk, sclk_dmc, aclk_200,
+ aclk_100, aclk_160, aclk_133);
clk_f.rate = armclk;
clk_h.rate = sclk_dmc;
- clk_p.rate = periphclk;
+ clk_p.rate = aclk_100;
for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++)
s3c_set_clksrc(&clksrcs[ptr], true);
diff --git a/arch/arm/mach-s5pv310/cpu.c b/arch/arm/mach-s5pv310/cpu.c
index 4add39853ff..82ce4aa6d61 100644
--- a/arch/arm/mach-s5pv310/cpu.c
+++ b/arch/arm/mach-s5pv310/cpu.c
@@ -15,10 +15,12 @@
#include <asm/mach/irq.h>
#include <asm/proc-fns.h>
+#include <asm/hardware/cache-l2x0.h>
#include <plat/cpu.h>
#include <plat/clock.h>
#include <plat/s5pv310.h>
+#include <plat/sdhci.h>
#include <mach/regs-irq.h>
@@ -56,15 +58,30 @@ static struct map_desc s5pv310_iodesc[] __initdata = {
.length = SZ_4K,
.type = MT_DEVICE,
}, {
- .virtual = (unsigned long)S5P_VA_GPIO,
+ .virtual = (unsigned long)S5P_VA_GPIO1,
.pfn = __phys_to_pfn(S5PV310_PA_GPIO1),
.length = SZ_4K,
.type = MT_DEVICE,
}, {
+ .virtual = (unsigned long)S5P_VA_GPIO2,
+ .pfn = __phys_to_pfn(S5PV310_PA_GPIO2),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S5P_VA_GPIO3,
+ .pfn = __phys_to_pfn(S5PV310_PA_GPIO3),
+ .length = SZ_256,
+ .type = MT_DEVICE,
+ }, {
.virtual = (unsigned long)S3C_VA_UART,
.pfn = __phys_to_pfn(S3C_PA_UART),
.length = SZ_512K,
.type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S5P_VA_SROMC,
+ .pfn = __phys_to_pfn(S5PV310_PA_SROMC),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
},
};
@@ -83,6 +100,12 @@ static void s5pv310_idle(void)
void __init s5pv310_map_io(void)
{
iotable_init(s5pv310_iodesc, ARRAY_SIZE(s5pv310_iodesc));
+
+ /* initialize device information early */
+ s5pv310_default_sdhci0();
+ s5pv310_default_sdhci1();
+ s5pv310_default_sdhci2();
+ s5pv310_default_sdhci3();
}
void __init s5pv310_init_clocks(int xtal)
@@ -131,6 +154,28 @@ static int __init s5pv310_core_init(void)
core_initcall(s5pv310_core_init);
+#ifdef CONFIG_CACHE_L2X0
+static int __init s5pv310_l2x0_cache_init(void)
+{
+ /* TAG, Data Latency Control: 2cycle */
+ __raw_writel(0x110, S5P_VA_L2CC + L2X0_TAG_LATENCY_CTRL);
+ __raw_writel(0x110, S5P_VA_L2CC + L2X0_DATA_LATENCY_CTRL);
+
+ /* L2X0 Prefetch Control */
+ __raw_writel(0x30000007, S5P_VA_L2CC + L2X0_PREFETCH_CTRL);
+
+ /* L2X0 Power Control */
+ __raw_writel(L2X0_DYNAMIC_CLK_GATING_EN | L2X0_STNDBY_MODE_EN,
+ S5P_VA_L2CC + L2X0_POWER_CTRL);
+
+ l2x0_init(S5P_VA_L2CC, 0x7C070001, 0xC200ffff);
+
+ return 0;
+}
+
+early_initcall(s5pv310_l2x0_cache_init);
+#endif
+
int __init s5pv310_init(void)
{
printk(KERN_INFO "S5PV310: Initializing architecture\n");
diff --git a/arch/arm/mach-s5pv310/gpiolib.c b/arch/arm/mach-s5pv310/gpiolib.c
new file mode 100644
index 00000000000..55217b8923e
--- /dev/null
+++ b/arch/arm/mach-s5pv310/gpiolib.c
@@ -0,0 +1,304 @@
+/* linux/arch/arm/mach-s5pv310/gpiolib.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * S5PV310 - GPIOlib support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+
+#include <mach/map.h>
+
+#include <plat/gpio-core.h>
+#include <plat/gpio-cfg.h>
+#include <plat/gpio-cfg-helpers.h>
+
+static struct s3c_gpio_cfg gpio_cfg = {
+ .set_config = s3c_gpio_setcfg_s3c64xx_4bit,
+ .set_pull = s3c_gpio_setpull_updown,
+ .get_pull = s3c_gpio_getpull_updown,
+};
+
+static struct s3c_gpio_cfg gpio_cfg_noint = {
+ .set_config = s3c_gpio_setcfg_s3c64xx_4bit,
+ .set_pull = s3c_gpio_setpull_updown,
+ .get_pull = s3c_gpio_getpull_updown,
+};
+
+/*
+ * Following are the gpio banks in v310.
+ *
+ * The 'config' member when left to NULL, is initialized to the default
+ * structure gpio_cfg in the init function below.
+ *
+ * The 'base' member is also initialized in the init function below.
+ * Note: The initialization of 'base' member of s3c_gpio_chip structure
+ * uses the above macro and depends on the banks being listed in order here.
+ */
+static struct s3c_gpio_chip s5pv310_gpio_part1_4bit[] = {
+ {
+ .chip = {
+ .base = S5PV310_GPA0(0),
+ .ngpio = S5PV310_GPIO_A0_NR,
+ .label = "GPA0",
+ },
+ }, {
+ .chip = {
+ .base = S5PV310_GPA1(0),
+ .ngpio = S5PV310_GPIO_A1_NR,
+ .label = "GPA1",
+ },
+ }, {
+ .chip = {
+ .base = S5PV310_GPB(0),
+ .ngpio = S5PV310_GPIO_B_NR,
+ .label = "GPB",
+ },
+ }, {
+ .chip = {
+ .base = S5PV310_GPC0(0),
+ .ngpio = S5PV310_GPIO_C0_NR,
+ .label = "GPC0",
+ },
+ }, {
+ .chip = {
+ .base = S5PV310_GPC1(0),
+ .ngpio = S5PV310_GPIO_C1_NR,
+ .label = "GPC1",
+ },
+ }, {
+ .chip = {
+ .base = S5PV310_GPD0(0),
+ .ngpio = S5PV310_GPIO_D0_NR,
+ .label = "GPD0",
+ },
+ }, {
+ .chip = {
+ .base = S5PV310_GPD1(0),
+ .ngpio = S5PV310_GPIO_D1_NR,
+ .label = "GPD1",
+ },
+ }, {
+ .chip = {
+ .base = S5PV310_GPE0(0),
+ .ngpio = S5PV310_GPIO_E0_NR,
+ .label = "GPE0",
+ },
+ }, {
+ .chip = {
+ .base = S5PV310_GPE1(0),
+ .ngpio = S5PV310_GPIO_E1_NR,
+ .label = "GPE1",
+ },
+ }, {
+ .chip = {
+ .base = S5PV310_GPE2(0),
+ .ngpio = S5PV310_GPIO_E2_NR,
+ .label = "GPE2",
+ },
+ }, {
+ .chip = {
+ .base = S5PV310_GPE3(0),
+ .ngpio = S5PV310_GPIO_E3_NR,
+ .label = "GPE3",
+ },
+ }, {
+ .chip = {
+ .base = S5PV310_GPE4(0),
+ .ngpio = S5PV310_GPIO_E4_NR,
+ .label = "GPE4",
+ },
+ }, {
+ .chip = {
+ .base = S5PV310_GPF0(0),
+ .ngpio = S5PV310_GPIO_F0_NR,
+ .label = "GPF0",
+ },
+ }, {
+ .chip = {
+ .base = S5PV310_GPF1(0),
+ .ngpio = S5PV310_GPIO_F1_NR,
+ .label = "GPF1",
+ },
+ }, {
+ .chip = {
+ .base = S5PV310_GPF2(0),
+ .ngpio = S5PV310_GPIO_F2_NR,
+ .label = "GPF2",
+ },
+ }, {
+ .chip = {
+ .base = S5PV310_GPF3(0),
+ .ngpio = S5PV310_GPIO_F3_NR,
+ .label = "GPF3",
+ },
+ },
+};
+
+static struct s3c_gpio_chip s5pv310_gpio_part2_4bit[] = {
+ {
+ .chip = {
+ .base = S5PV310_GPJ0(0),
+ .ngpio = S5PV310_GPIO_J0_NR,
+ .label = "GPJ0",
+ },
+ }, {
+ .chip = {
+ .base = S5PV310_GPJ1(0),
+ .ngpio = S5PV310_GPIO_J1_NR,
+ .label = "GPJ1",
+ },
+ }, {
+ .chip = {
+ .base = S5PV310_GPK0(0),
+ .ngpio = S5PV310_GPIO_K0_NR,
+ .label = "GPK0",
+ },
+ }, {
+ .chip = {
+ .base = S5PV310_GPK1(0),
+ .ngpio = S5PV310_GPIO_K1_NR,
+ .label = "GPK1",
+ },
+ }, {
+ .chip = {
+ .base = S5PV310_GPK2(0),
+ .ngpio = S5PV310_GPIO_K2_NR,
+ .label = "GPK2",
+ },
+ }, {
+ .chip = {
+ .base = S5PV310_GPK3(0),
+ .ngpio = S5PV310_GPIO_K3_NR,
+ .label = "GPK3",
+ },
+ }, {
+ .chip = {
+ .base = S5PV310_GPL0(0),
+ .ngpio = S5PV310_GPIO_L0_NR,
+ .label = "GPL0",
+ },
+ }, {
+ .chip = {
+ .base = S5PV310_GPL1(0),
+ .ngpio = S5PV310_GPIO_L1_NR,
+ .label = "GPL1",
+ },
+ }, {
+ .chip = {
+ .base = S5PV310_GPL2(0),
+ .ngpio = S5PV310_GPIO_L2_NR,
+ .label = "GPL2",
+ },
+ }, {
+ .base = (S5P_VA_GPIO2 + 0xC00),
+ .config = &gpio_cfg_noint,
+ .irq_base = IRQ_EINT(0),
+ .chip = {
+ .base = S5PV310_GPX0(0),
+ .ngpio = S5PV310_GPIO_X0_NR,
+ .label = "GPX0",
+ .to_irq = samsung_gpiolib_to_irq,
+ },
+ }, {
+ .base = (S5P_VA_GPIO2 + 0xC20),
+ .config = &gpio_cfg_noint,
+ .irq_base = IRQ_EINT(8),
+ .chip = {
+ .base = S5PV310_GPX1(0),
+ .ngpio = S5PV310_GPIO_X1_NR,
+ .label = "GPX1",
+ .to_irq = samsung_gpiolib_to_irq,
+ },
+ }, {
+ .base = (S5P_VA_GPIO2 + 0xC40),
+ .config = &gpio_cfg_noint,
+ .irq_base = IRQ_EINT(16),
+ .chip = {
+ .base = S5PV310_GPX2(0),
+ .ngpio = S5PV310_GPIO_X2_NR,
+ .label = "GPX2",
+ .to_irq = samsung_gpiolib_to_irq,
+ },
+ }, {
+ .base = (S5P_VA_GPIO2 + 0xC60),
+ .config = &gpio_cfg_noint,
+ .irq_base = IRQ_EINT(24),
+ .chip = {
+ .base = S5PV310_GPX3(0),
+ .ngpio = S5PV310_GPIO_X3_NR,
+ .label = "GPX3",
+ .to_irq = samsung_gpiolib_to_irq,
+ },
+ },
+};
+
+static struct s3c_gpio_chip s5pv310_gpio_part3_4bit[] = {
+ {
+ .chip = {
+ .base = S5PV310_GPZ(0),
+ .ngpio = S5PV310_GPIO_Z_NR,
+ .label = "GPZ",
+ },
+ },
+};
+
+static __init int s5pv310_gpiolib_init(void)
+{
+ struct s3c_gpio_chip *chip;
+ int i;
+ int nr_chips;
+
+ /* GPIO part 1 */
+
+ chip = s5pv310_gpio_part1_4bit;
+ nr_chips = ARRAY_SIZE(s5pv310_gpio_part1_4bit);
+
+ for (i = 0; i < nr_chips; i++, chip++) {
+ if (chip->config == NULL)
+ chip->config = &gpio_cfg;
+ if (chip->base == NULL)
+ chip->base = S5P_VA_GPIO1 + (i) * 0x20;
+ }
+
+ samsung_gpiolib_add_4bit_chips(s5pv310_gpio_part1_4bit, nr_chips);
+
+ /* GPIO part 2 */
+
+ chip = s5pv310_gpio_part2_4bit;
+ nr_chips = ARRAY_SIZE(s5pv310_gpio_part2_4bit);
+
+ for (i = 0; i < nr_chips; i++, chip++) {
+ if (chip->config == NULL)
+ chip->config = &gpio_cfg;
+ if (chip->base == NULL)
+ chip->base = S5P_VA_GPIO2 + (i) * 0x20;
+ }
+
+ samsung_gpiolib_add_4bit_chips(s5pv310_gpio_part2_4bit, nr_chips);
+
+ /* GPIO part 3 */
+
+ chip = s5pv310_gpio_part3_4bit;
+ nr_chips = ARRAY_SIZE(s5pv310_gpio_part3_4bit);
+
+ for (i = 0; i < nr_chips; i++, chip++) {
+ if (chip->config == NULL)
+ chip->config = &gpio_cfg;
+ if (chip->base == NULL)
+ chip->base = S5P_VA_GPIO3 + (i) * 0x20;
+ }
+
+ samsung_gpiolib_add_4bit_chips(s5pv310_gpio_part3_4bit, nr_chips);
+
+ return 0;
+}
+core_initcall(s5pv310_gpiolib_init);
diff --git a/arch/arm/mach-s5pv310/hotplug.c b/arch/arm/mach-s5pv310/hotplug.c
new file mode 100644
index 00000000000..03652c3605f
--- /dev/null
+++ b/arch/arm/mach-s5pv310/hotplug.c
@@ -0,0 +1,144 @@
+/* linux arch/arm/mach-s5pv310/hotplug.c
+ *
+ * Cloned from linux/arch/arm/mach-realview/hotplug.c
+ *
+ * Copyright (C) 2002 ARM Ltd.
+ * All Rights Reserved
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/smp.h>
+#include <linux/completion.h>
+
+#include <asm/cacheflush.h>
+
+extern volatile int pen_release;
+
+static DECLARE_COMPLETION(cpu_killed);
+
+static inline void cpu_enter_lowpower(void)
+{
+ unsigned int v;
+
+ flush_cache_all();
+ asm volatile(
+ " mcr p15, 0, %1, c7, c5, 0\n"
+ " mcr p15, 0, %1, c7, c10, 4\n"
+ /*
+ * Turn off coherency
+ */
+ " mrc p15, 0, %0, c1, c0, 1\n"
+ " bic %0, %0, #0x20\n"
+ " mcr p15, 0, %0, c1, c0, 1\n"
+ " mrc p15, 0, %0, c1, c0, 0\n"
+ " bic %0, %0, #0x04\n"
+ " mcr p15, 0, %0, c1, c0, 0\n"
+ : "=&r" (v)
+ : "r" (0)
+ : "cc");
+}
+
+static inline void cpu_leave_lowpower(void)
+{
+ unsigned int v;
+
+ asm volatile(
+ "mrc p15, 0, %0, c1, c0, 0\n"
+ " orr %0, %0, #0x04\n"
+ " mcr p15, 0, %0, c1, c0, 0\n"
+ " mrc p15, 0, %0, c1, c0, 1\n"
+ " orr %0, %0, #0x20\n"
+ " mcr p15, 0, %0, c1, c0, 1\n"
+ : "=&r" (v)
+ :
+ : "cc");
+}
+
+static inline void platform_do_lowpower(unsigned int cpu)
+{
+ /*
+ * there is no power-control hardware on this platform, so all
+ * we can do is put the core into WFI; this is safe as the calling
+ * code will have already disabled interrupts
+ */
+ for (;;) {
+ /*
+ * here's the WFI
+ */
+ asm(".word 0xe320f003\n"
+ :
+ :
+ : "memory", "cc");
+
+ if (pen_release == cpu) {
+ /*
+ * OK, proper wakeup, we're done
+ */
+ break;
+ }
+
+ /*
+ * getting here, means that we have come out of WFI without
+ * having been woken up - this shouldn't happen
+ *
+ * The trouble is, letting people know about this is not really
+ * possible, since we are currently running incoherently, and
+ * therefore cannot safely call printk() or anything else
+ */
+#ifdef DEBUG
+ printk(KERN_WARN "CPU%u: spurious wakeup call\n", cpu);
+#endif
+ }
+}
+
+int platform_cpu_kill(unsigned int cpu)
+{
+ return wait_for_completion_timeout(&cpu_killed, 5000);
+}
+
+/*
+ * platform-specific code to shutdown a CPU
+ *
+ * Called with IRQs disabled
+ */
+void platform_cpu_die(unsigned int cpu)
+{
+#ifdef DEBUG
+ unsigned int this_cpu = hard_smp_processor_id();
+
+ if (cpu != this_cpu) {
+ printk(KERN_CRIT "Eek! platform_cpu_die running on %u, should be %u\n",
+ this_cpu, cpu);
+ BUG();
+ }
+#endif
+
+ printk(KERN_NOTICE "CPU%u: shutdown\n", cpu);
+ complete(&cpu_killed);
+
+ /*
+ * we're ready for shutdown now, so do it
+ */
+ cpu_enter_lowpower();
+ platform_do_lowpower(cpu);
+
+ /*
+ * bring this CPU back into the world of cache
+ * coherency, and then restore interrupts
+ */
+ cpu_leave_lowpower();
+}
+
+int platform_cpu_disable(unsigned int cpu)
+{
+ /*
+ * we don't allow CPU 0 to be shutdown (it is still too special
+ * e.g. clock tick interrupts)
+ */
+ return cpu == 0 ? -EPERM : 0;
+}
diff --git a/arch/arm/mach-s5pv310/include/mach/irqs.h b/arch/arm/mach-s5pv310/include/mach/irqs.h
index 471fc3bb199..99e7dad8a85 100644
--- a/arch/arm/mach-s5pv310/include/mach/irqs.h
+++ b/arch/arm/mach-s5pv310/include/mach/irqs.h
@@ -3,7 +3,7 @@
* Copyright (c) 2010 Samsung Electronics Co., Ltd.
* http://www.samsung.com/
*
- * S5PV210 - IRQ definitions
+ * S5PV310 - IRQ definitions
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -60,6 +60,9 @@
#define IRQ_TIMER3_VIC COMBINER_IRQ(22, 3)
#define IRQ_TIMER4_VIC COMBINER_IRQ(22, 4)
+#define IRQ_RTC_ALARM COMBINER_IRQ(23, 0)
+#define IRQ_RTC_TIC COMBINER_IRQ(23, 1)
+
#define IRQ_UART0 COMBINER_IRQ(26, 0)
#define IRQ_UART1 COMBINER_IRQ(26, 1)
#define IRQ_UART2 COMBINER_IRQ(26, 2)
@@ -67,13 +70,46 @@
#define IRQ_UART4 COMBINER_IRQ(26, 4)
#define IRQ_IIC COMBINER_IRQ(27, 0)
+#define IRQ_IIC1 COMBINER_IRQ(27, 1)
+#define IRQ_IIC2 COMBINER_IRQ(27, 2)
+#define IRQ_IIC3 COMBINER_IRQ(27, 3)
+#define IRQ_IIC4 COMBINER_IRQ(27, 4)
+#define IRQ_IIC5 COMBINER_IRQ(27, 5)
+#define IRQ_IIC6 COMBINER_IRQ(27, 6)
+#define IRQ_IIC7 COMBINER_IRQ(27, 7)
+
+#define IRQ_HSMMC0 COMBINER_IRQ(29, 0)
+#define IRQ_HSMMC1 COMBINER_IRQ(29, 1)
+#define IRQ_HSMMC2 COMBINER_IRQ(29, 2)
+#define IRQ_HSMMC3 COMBINER_IRQ(29, 3)
#define IRQ_ONENAND_AUDI COMBINER_IRQ(34, 0)
-/* Set the default NR_IRQS */
+#define IRQ_EINT4 COMBINER_IRQ(37, 0)
+#define IRQ_EINT5 COMBINER_IRQ(37, 1)
+#define IRQ_EINT6 COMBINER_IRQ(37, 2)
+#define IRQ_EINT7 COMBINER_IRQ(37, 3)
+#define IRQ_EINT8 COMBINER_IRQ(38, 0)
+
+#define IRQ_EINT9 COMBINER_IRQ(38, 1)
+#define IRQ_EINT10 COMBINER_IRQ(38, 2)
+#define IRQ_EINT11 COMBINER_IRQ(38, 3)
+#define IRQ_EINT12 COMBINER_IRQ(38, 4)
+#define IRQ_EINT13 COMBINER_IRQ(38, 5)
+#define IRQ_EINT14 COMBINER_IRQ(38, 6)
+#define IRQ_EINT15 COMBINER_IRQ(38, 7)
+
+#define IRQ_EINT16_31 COMBINER_IRQ(39, 0)
-#define NR_IRQS COMBINER_IRQ(MAX_COMBINER_NR, 0)
+#define MAX_COMBINER_NR 40
+
+#define S5P_IRQ_EINT_BASE COMBINER_IRQ(MAX_COMBINER_NR, 0)
+
+#define S5P_EINT_BASE1 (S5P_IRQ_EINT_BASE + 0)
+#define S5P_EINT_BASE2 (S5P_IRQ_EINT_BASE + 16)
+
+/* Set the default NR_IRQS */
-#define MAX_COMBINER_NR 39
+#define NR_IRQS (S5P_IRQ_EINT_BASE + 32)
#endif /* __ASM_ARCH_IRQS_H */
diff --git a/arch/arm/mach-s5pv310/include/mach/map.h b/arch/arm/mach-s5pv310/include/mach/map.h
index aff6d23624b..7acf4e77e92 100644
--- a/arch/arm/mach-s5pv310/include/mach/map.h
+++ b/arch/arm/mach-s5pv310/include/mach/map.h
@@ -25,6 +25,8 @@
#define S5PV310_PA_SYSRAM (0x02025000)
+#define S5PV310_PA_SROM_BANK(x) (0x04000000 + ((x) * 0x01000000))
+
#define S5PC210_PA_ONENAND (0x0C000000)
#define S5P_PA_ONENAND S5PC210_PA_ONENAND
@@ -34,12 +36,13 @@
#define S5PV310_PA_CHIPID (0x10000000)
#define S5P_PA_CHIPID S5PV310_PA_CHIPID
-#define S5PV310_PA_SYSCON (0x10020000)
+#define S5PV310_PA_SYSCON (0x10010000)
#define S5P_PA_SYSCON S5PV310_PA_SYSCON
#define S5PV310_PA_CMU (0x10030000)
#define S5PV310_PA_WATCHDOG (0x10060000)
+#define S5PV310_PA_RTC (0x10070000)
#define S5PV310_PA_COMBINER (0x10448000)
@@ -55,6 +58,8 @@
#define S5PV310_PA_HSMMC(x) (0x12510000 + ((x) * 0x10000))
+#define S5PV310_PA_SROMC (0x12570000)
+
#define S5PV310_PA_UART (0x13800000)
#define S5P_PA_UART(x) (S5PV310_PA_UART + ((x) * S3C_UART_OFFSET))
@@ -66,7 +71,7 @@
#define S5P_SZ_UART SZ_256
-#define S5PV310_PA_IIC0 (0x13860000)
+#define S5PV310_PA_IIC(x) (0x13860000 + ((x) * 0x10000))
#define S5PV310_PA_TIMER (0x139D0000)
#define S5P_PA_TIMER S5PV310_PA_TIMER
@@ -80,7 +85,15 @@
#define S3C_PA_HSMMC1 S5PV310_PA_HSMMC(1)
#define S3C_PA_HSMMC2 S5PV310_PA_HSMMC(2)
#define S3C_PA_HSMMC3 S5PV310_PA_HSMMC(3)
-#define S3C_PA_IIC S5PV310_PA_IIC0
+#define S3C_PA_IIC S5PV310_PA_IIC(0)
+#define S3C_PA_IIC1 S5PV310_PA_IIC(1)
+#define S3C_PA_IIC2 S5PV310_PA_IIC(2)
+#define S3C_PA_IIC3 S5PV310_PA_IIC(3)
+#define S3C_PA_IIC4 S5PV310_PA_IIC(4)
+#define S3C_PA_IIC5 S5PV310_PA_IIC(5)
+#define S3C_PA_IIC6 S5PV310_PA_IIC(6)
+#define S3C_PA_IIC7 S5PV310_PA_IIC(7)
+#define S3C_PA_RTC S5PV310_PA_RTC
#define S3C_PA_WDT S5PV310_PA_WATCHDOG
#endif /* __ASM_ARCH_MAP_H */
diff --git a/arch/arm/mach-s5pv310/include/mach/regs-clock.h b/arch/arm/mach-s5pv310/include/mach/regs-clock.h
index 4013553cd9b..f1028cad978 100644
--- a/arch/arm/mach-s5pv310/include/mach/regs-clock.h
+++ b/arch/arm/mach-s5pv310/include/mach/regs-clock.h
@@ -26,11 +26,23 @@
#define S5P_CLKSRC_TOP0 S5P_CLKREG(0x0C210)
#define S5P_CLKSRC_TOP1 S5P_CLKREG(0x0C214)
-
+#define S5P_CLKSRC_CAM S5P_CLKREG(0x0C220)
+#define S5P_CLKSRC_IMAGE S5P_CLKREG(0x0C230)
+#define S5P_CLKSRC_LCD0 S5P_CLKREG(0x0C234)
+#define S5P_CLKSRC_LCD1 S5P_CLKREG(0x0C238)
+#define S5P_CLKSRC_FSYS S5P_CLKREG(0x0C240)
#define S5P_CLKSRC_PERIL0 S5P_CLKREG(0x0C250)
+#define S5P_CLKSRC_PERIL1 S5P_CLKREG(0x0C254)
#define S5P_CLKDIV_TOP S5P_CLKREG(0x0C510)
-
+#define S5P_CLKDIV_CAM S5P_CLKREG(0x0C520)
+#define S5P_CLKDIV_IMAGE S5P_CLKREG(0x0C530)
+#define S5P_CLKDIV_LCD0 S5P_CLKREG(0x0C534)
+#define S5P_CLKDIV_LCD1 S5P_CLKREG(0x0C538)
+#define S5P_CLKDIV_FSYS0 S5P_CLKREG(0x0C540)
+#define S5P_CLKDIV_FSYS1 S5P_CLKREG(0x0C544)
+#define S5P_CLKDIV_FSYS2 S5P_CLKREG(0x0C548)
+#define S5P_CLKDIV_FSYS3 S5P_CLKREG(0x0C54C)
#define S5P_CLKDIV_PERIL0 S5P_CLKREG(0x0C550)
#define S5P_CLKDIV_PERIL1 S5P_CLKREG(0x0C554)
#define S5P_CLKDIV_PERIL2 S5P_CLKREG(0x0C558)
@@ -38,9 +50,21 @@
#define S5P_CLKDIV_PERIL4 S5P_CLKREG(0x0C560)
#define S5P_CLKDIV_PERIL5 S5P_CLKREG(0x0C564)
+#define S5P_CLKSRC_MASK_TOP S5P_CLKREG(0x0C310)
+#define S5P_CLKSRC_MASK_CAM S5P_CLKREG(0x0C320)
+#define S5P_CLKSRC_MASK_LCD0 S5P_CLKREG(0x0C334)
+#define S5P_CLKSRC_MASK_LCD1 S5P_CLKREG(0x0C338)
+#define S5P_CLKSRC_MASK_FSYS S5P_CLKREG(0x0C340)
#define S5P_CLKSRC_MASK_PERIL0 S5P_CLKREG(0x0C350)
+#define S5P_CLKSRC_MASK_PERIL1 S5P_CLKREG(0x0C354)
+#define S5P_CLKGATE_IP_CAM S5P_CLKREG(0x0C920)
+#define S5P_CLKGATE_IP_IMAGE S5P_CLKREG(0x0C930)
+#define S5P_CLKGATE_IP_LCD0 S5P_CLKREG(0x0C934)
+#define S5P_CLKGATE_IP_LCD1 S5P_CLKREG(0x0C938)
+#define S5P_CLKGATE_IP_FSYS S5P_CLKREG(0x0C940)
#define S5P_CLKGATE_IP_PERIL S5P_CLKREG(0x0C950)
+#define S5P_CLKGATE_IP_PERIR S5P_CLKREG(0x0C960)
#define S5P_CLKSRC_CORE S5P_CLKREG(0x10200)
#define S5P_CLKDIV_CORE0 S5P_CLKREG(0x10500)
@@ -60,4 +84,8 @@
#define S5P_CLKGATE_SCLKCPU S5P_CLKREG(0x14800)
+/* Compatibility defines */
+
+#define S5P_EPLL_CON S5P_EPLL_CON0
+
#endif /* __ASM_ARCH_REGS_CLOCK_H */
diff --git a/arch/arm/mach-s5pv310/include/mach/regs-gpio.h b/arch/arm/mach-s5pv310/include/mach/regs-gpio.h
new file mode 100644
index 00000000000..82e9e0c9d45
--- /dev/null
+++ b/arch/arm/mach-s5pv310/include/mach/regs-gpio.h
@@ -0,0 +1,42 @@
+/* linux/arch/arm/mach-s5pv310/include/mach/regs-gpio.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * S5PV310 - GPIO (including EINT) register definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_REGS_GPIO_H
+#define __ASM_ARCH_REGS_GPIO_H __FILE__
+
+#include <mach/map.h>
+#include <mach/irqs.h>
+
+#define S5PV310_EINT40CON (S5P_VA_GPIO2 + 0xE00)
+#define S5P_EINT_CON(x) (S5PV310_EINT40CON + ((x) * 0x4))
+
+#define S5PV310_EINT40FLTCON0 (S5P_VA_GPIO2 + 0xE80)
+#define S5P_EINT_FLTCON(x) (S5PV310_EINT40FLTCON0 + ((x) * 0x4))
+
+#define S5PV310_EINT40MASK (S5P_VA_GPIO2 + 0xF00)
+#define S5P_EINT_MASK(x) (S5PV310_EINT40MASK + ((x) * 0x4))
+
+#define S5PV310_EINT40PEND (S5P_VA_GPIO2 + 0xF40)
+#define S5P_EINT_PEND(x) (S5PV310_EINT40PEND + ((x) * 0x4))
+
+#define EINT_REG_NR(x) (EINT_OFFSET(x) >> 3)
+
+#define eint_irq_to_bit(irq) (1 << (EINT_OFFSET(irq) & 0x7))
+
+#define EINT_MODE S3C_GPIO_SFN(0xf)
+
+#define EINT_GPIO_0(x) S5PV310_GPX0(x)
+#define EINT_GPIO_1(x) S5PV310_GPX1(x)
+#define EINT_GPIO_2(x) S5PV310_GPX2(x)
+#define EINT_GPIO_3(x) S5PV310_GPX3(x)
+
+#endif /* __ASM_ARCH_REGS_GPIO_H */
diff --git a/arch/arm/mach-s5pv310/include/mach/regs-srom.h b/arch/arm/mach-s5pv310/include/mach/regs-srom.h
new file mode 100644
index 00000000000..1898b3e1055
--- /dev/null
+++ b/arch/arm/mach-s5pv310/include/mach/regs-srom.h
@@ -0,0 +1,50 @@
+/* linux/arch/arm/mach-s5pv310/include/mach/regs-srom.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * S5PV310 - SROMC register definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_REGS_SROM_H
+#define __ASM_ARCH_REGS_SROM_H __FILE__
+
+#include <mach/map.h>
+
+#define S5PV310_SROMREG(x) (S5P_VA_SROMC + (x))
+
+#define S5PV310_SROM_BW S5PV310_SROMREG(0x0)
+#define S5PV310_SROM_BC0 S5PV310_SROMREG(0x4)
+#define S5PV310_SROM_BC1 S5PV310_SROMREG(0x8)
+#define S5PV310_SROM_BC2 S5PV310_SROMREG(0xc)
+#define S5PV310_SROM_BC3 S5PV310_SROMREG(0x10)
+
+/* one register BW holds 4 x 4-bit packed settings for NCS0 - NCS3 */
+
+#define S5PV310_SROM_BW__DATAWIDTH__SHIFT 0
+#define S5PV310_SROM_BW__ADDRMODE__SHIFT 1
+#define S5PV310_SROM_BW__WAITENABLE__SHIFT 2
+#define S5PV310_SROM_BW__BYTEENABLE__SHIFT 3
+
+#define S5PV310_SROM_BW__CS_MASK 0xf
+
+#define S5PV310_SROM_BW__NCS0__SHIFT 0
+#define S5PV310_SROM_BW__NCS1__SHIFT 4
+#define S5PV310_SROM_BW__NCS2__SHIFT 8
+#define S5PV310_SROM_BW__NCS3__SHIFT 12
+
+/* applies to same to BCS0 - BCS3 */
+
+#define S5PV310_SROM_BCX__PMC__SHIFT 0
+#define S5PV310_SROM_BCX__TACP__SHIFT 4
+#define S5PV310_SROM_BCX__TCAH__SHIFT 8
+#define S5PV310_SROM_BCX__TCOH__SHIFT 12
+#define S5PV310_SROM_BCX__TACC__SHIFT 16
+#define S5PV310_SROM_BCX__TCOS__SHIFT 24
+#define S5PV310_SROM_BCX__TACS__SHIFT 28
+
+#endif /* __ASM_ARCH_REGS_SROM_H */
diff --git a/arch/arm/mach-s5pv310/include/mach/vmalloc.h b/arch/arm/mach-s5pv310/include/mach/vmalloc.h
index 256f221edf3..65759fb9758 100644
--- a/arch/arm/mach-s5pv310/include/mach/vmalloc.h
+++ b/arch/arm/mach-s5pv310/include/mach/vmalloc.h
@@ -17,6 +17,6 @@
#ifndef __ASM_ARCH_VMALLOC_H
#define __ASM_ARCH_VMALLOC_H __FILE__
-#define VMALLOC_END (0xF0000000UL)
+#define VMALLOC_END 0xF6000000UL
#endif /* __ASM_ARCH_VMALLOC_H */
diff --git a/arch/arm/mach-s5pv310/irq-combiner.c b/arch/arm/mach-s5pv310/irq-combiner.c
index 0f7052164f2..c3f88c3faf6 100644
--- a/arch/arm/mach-s5pv310/irq-combiner.c
+++ b/arch/arm/mach-s5pv310/irq-combiner.c
@@ -66,11 +66,7 @@ static void combiner_handle_cascade_irq(unsigned int irq, struct irq_desc *desc)
if (status == 0)
goto out;
- for (combiner_irq = 0; combiner_irq < 32; combiner_irq++) {
- if (status & 0x1)
- break;
- status >>= 1;
- }
+ combiner_irq = __ffs(status);
cascade_irq = combiner_irq + (chip_data->irq_offset & ~31);
if (unlikely(cascade_irq >= NR_IRQS))
diff --git a/arch/arm/mach-s5pv310/irq-eint.c b/arch/arm/mach-s5pv310/irq-eint.c
new file mode 100644
index 00000000000..5877503e92c
--- /dev/null
+++ b/arch/arm/mach-s5pv310/irq-eint.c
@@ -0,0 +1,228 @@
+/* linux/arch/arm/mach-s5pv310/irq-eint.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * S5PV310 - IRQ EINT support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/sysdev.h>
+#include <linux/gpio.h>
+
+#include <plat/pm.h>
+#include <plat/cpu.h>
+#include <plat/gpio-cfg.h>
+
+#include <mach/regs-gpio.h>
+
+static DEFINE_SPINLOCK(eint_lock);
+
+static unsigned int eint0_15_data[16];
+
+static unsigned int s5pv310_get_irq_nr(unsigned int number)
+{
+ u32 ret = 0;
+
+ switch (number) {
+ case 0 ... 3:
+ ret = (number + IRQ_EINT0);
+ break;
+ case 4 ... 7:
+ ret = (number + (IRQ_EINT4 - 4));
+ break;
+ case 8 ... 15:
+ ret = (number + (IRQ_EINT8 - 8));
+ break;
+ default:
+ printk(KERN_ERR "number available : %d\n", number);
+ }
+
+ return ret;
+}
+
+static inline void s5pv310_irq_eint_mask(unsigned int irq)
+{
+ u32 mask;
+
+ spin_lock(&eint_lock);
+ mask = __raw_readl(S5P_EINT_MASK(EINT_REG_NR(irq)));
+ mask |= eint_irq_to_bit(irq);
+ __raw_writel(mask, S5P_EINT_MASK(EINT_REG_NR(irq)));
+ spin_unlock(&eint_lock);
+}
+
+static void s5pv310_irq_eint_unmask(unsigned int irq)
+{
+ u32 mask;
+
+ spin_lock(&eint_lock);
+ mask = __raw_readl(S5P_EINT_MASK(EINT_REG_NR(irq)));
+ mask &= ~(eint_irq_to_bit(irq));
+ __raw_writel(mask, S5P_EINT_MASK(EINT_REG_NR(irq)));
+ spin_unlock(&eint_lock);
+}
+
+static inline void s5pv310_irq_eint_ack(unsigned int irq)
+{
+ __raw_writel(eint_irq_to_bit(irq), S5P_EINT_PEND(EINT_REG_NR(irq)));
+}
+
+static void s5pv310_irq_eint_maskack(unsigned int irq)
+{
+ s5pv310_irq_eint_mask(irq);
+ s5pv310_irq_eint_ack(irq);
+}
+
+static int s5pv310_irq_eint_set_type(unsigned int irq, unsigned int type)
+{
+ int offs = EINT_OFFSET(irq);
+ int shift;
+ u32 ctrl, mask;
+ u32 newvalue = 0;
+
+ switch (type) {
+ case IRQ_TYPE_EDGE_RISING:
+ newvalue = S5P_IRQ_TYPE_EDGE_RISING;
+ break;
+
+ case IRQ_TYPE_EDGE_FALLING:
+ newvalue = S5P_IRQ_TYPE_EDGE_FALLING;
+ break;
+
+ case IRQ_TYPE_EDGE_BOTH:
+ newvalue = S5P_IRQ_TYPE_EDGE_BOTH;
+ break;
+
+ case IRQ_TYPE_LEVEL_LOW:
+ newvalue = S5P_IRQ_TYPE_LEVEL_LOW;
+ break;
+
+ case IRQ_TYPE_LEVEL_HIGH:
+ newvalue = S5P_IRQ_TYPE_LEVEL_HIGH;
+ break;
+
+ default:
+ printk(KERN_ERR "No such irq type %d", type);
+ return -EINVAL;
+ }
+
+ shift = (offs & 0x7) * 4;
+ mask = 0x7 << shift;
+
+ spin_lock(&eint_lock);
+ ctrl = __raw_readl(S5P_EINT_CON(EINT_REG_NR(irq)));
+ ctrl &= ~mask;
+ ctrl |= newvalue << shift;
+ __raw_writel(ctrl, S5P_EINT_CON(EINT_REG_NR(irq)));
+ spin_unlock(&eint_lock);
+
+ switch (offs) {
+ case 0 ... 7:
+ s3c_gpio_cfgpin(EINT_GPIO_0(offs & 0x7), EINT_MODE);
+ break;
+ case 8 ... 15:
+ s3c_gpio_cfgpin(EINT_GPIO_1(offs & 0x7), EINT_MODE);
+ break;
+ case 16 ... 23:
+ s3c_gpio_cfgpin(EINT_GPIO_2(offs & 0x7), EINT_MODE);
+ break;
+ case 24 ... 31:
+ s3c_gpio_cfgpin(EINT_GPIO_3(offs & 0x7), EINT_MODE);
+ break;
+ default:
+ printk(KERN_ERR "No such irq number %d", offs);
+ }
+
+ return 0;
+}
+
+static struct irq_chip s5pv310_irq_eint = {
+ .name = "s5pv310-eint",
+ .mask = s5pv310_irq_eint_mask,
+ .unmask = s5pv310_irq_eint_unmask,
+ .mask_ack = s5pv310_irq_eint_maskack,
+ .ack = s5pv310_irq_eint_ack,
+ .set_type = s5pv310_irq_eint_set_type,
+#ifdef CONFIG_PM
+ .set_wake = s3c_irqext_wake,
+#endif
+};
+
+/* s5pv310_irq_demux_eint
+ *
+ * This function demuxes the IRQ from from EINTs 16 to 31.
+ * It is designed to be inlined into the specific handler
+ * s5p_irq_demux_eintX_Y.
+ *
+ * Each EINT pend/mask registers handle eight of them.
+ */
+static inline void s5pv310_irq_demux_eint(unsigned int start)
+{
+ unsigned int irq;
+
+ u32 status = __raw_readl(S5P_EINT_PEND(EINT_REG_NR(start)));
+ u32 mask = __raw_readl(S5P_EINT_MASK(EINT_REG_NR(start)));
+
+ status &= ~mask;
+ status &= 0xff;
+
+ while (status) {
+ irq = fls(status) - 1;
+ generic_handle_irq(irq + start);
+ status &= ~(1 << irq);
+ }
+}
+
+static void s5pv310_irq_demux_eint16_31(unsigned int irq, struct irq_desc *desc)
+{
+ s5pv310_irq_demux_eint(IRQ_EINT(16));
+ s5pv310_irq_demux_eint(IRQ_EINT(24));
+}
+
+static void s5pv310_irq_eint0_15(unsigned int irq, struct irq_desc *desc)
+{
+ u32 *irq_data = get_irq_data(irq);
+ struct irq_chip *chip = get_irq_chip(irq);
+
+ chip->mask(irq);
+
+ if (chip->ack)
+ chip->ack(irq);
+
+ generic_handle_irq(*irq_data);
+
+ chip->unmask(irq);
+}
+
+int __init s5pv310_init_irq_eint(void)
+{
+ int irq;
+
+ for (irq = 0 ; irq <= 31 ; irq++) {
+ set_irq_chip(IRQ_EINT(irq), &s5pv310_irq_eint);
+ set_irq_handler(IRQ_EINT(irq), handle_level_irq);
+ set_irq_flags(IRQ_EINT(irq), IRQF_VALID);
+ }
+
+ set_irq_chained_handler(IRQ_EINT16_31, s5pv310_irq_demux_eint16_31);
+
+ for (irq = 0 ; irq <= 15 ; irq++) {
+ eint0_15_data[irq] = IRQ_EINT(irq);
+
+ set_irq_data(s5pv310_get_irq_nr(irq), &eint0_15_data[irq]);
+ set_irq_chained_handler(s5pv310_get_irq_nr(irq),
+ s5pv310_irq_eint0_15);
+ }
+
+ return 0;
+}
+
+arch_initcall(s5pv310_init_irq_eint);
diff --git a/arch/arm/mach-s5pv310/mach-smdkc210.c b/arch/arm/mach-s5pv310/mach-smdkc210.c
new file mode 100644
index 00000000000..2b8d4fc52d7
--- /dev/null
+++ b/arch/arm/mach-s5pv310/mach-smdkc210.c
@@ -0,0 +1,202 @@
+/* linux/arch/arm/mach-s5pv310/mach-smdkc210.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/serial_core.h>
+#include <linux/gpio.h>
+#include <linux/mmc/host.h>
+#include <linux/platform_device.h>
+#include <linux/smsc911x.h>
+#include <linux/io.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach-types.h>
+
+#include <plat/regs-serial.h>
+#include <plat/s5pv310.h>
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/sdhci.h>
+
+#include <mach/map.h>
+#include <mach/regs-srom.h>
+
+/* Following are default values for UCON, ULCON and UFCON UART registers */
+#define SMDKC210_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
+ S3C2410_UCON_RXILEVEL | \
+ S3C2410_UCON_TXIRQMODE | \
+ S3C2410_UCON_RXIRQMODE | \
+ S3C2410_UCON_RXFIFO_TOI | \
+ S3C2443_UCON_RXERR_IRQEN)
+
+#define SMDKC210_ULCON_DEFAULT S3C2410_LCON_CS8
+
+#define SMDKC210_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \
+ S5PV210_UFCON_TXTRIG4 | \
+ S5PV210_UFCON_RXTRIG4)
+
+static struct s3c2410_uartcfg smdkc210_uartcfgs[] __initdata = {
+ [0] = {
+ .hwport = 0,
+ .flags = 0,
+ .ucon = SMDKC210_UCON_DEFAULT,
+ .ulcon = SMDKC210_ULCON_DEFAULT,
+ .ufcon = SMDKC210_UFCON_DEFAULT,
+ },
+ [1] = {
+ .hwport = 1,
+ .flags = 0,
+ .ucon = SMDKC210_UCON_DEFAULT,
+ .ulcon = SMDKC210_ULCON_DEFAULT,
+ .ufcon = SMDKC210_UFCON_DEFAULT,
+ },
+ [2] = {
+ .hwport = 2,
+ .flags = 0,
+ .ucon = SMDKC210_UCON_DEFAULT,
+ .ulcon = SMDKC210_ULCON_DEFAULT,
+ .ufcon = SMDKC210_UFCON_DEFAULT,
+ },
+ [3] = {
+ .hwport = 3,
+ .flags = 0,
+ .ucon = SMDKC210_UCON_DEFAULT,
+ .ulcon = SMDKC210_ULCON_DEFAULT,
+ .ufcon = SMDKC210_UFCON_DEFAULT,
+ },
+};
+
+static struct s3c_sdhci_platdata smdkc210_hsmmc0_pdata __initdata = {
+ .cd_type = S3C_SDHCI_CD_GPIO,
+ .ext_cd_gpio = S5PV310_GPK0(2),
+ .ext_cd_gpio_invert = 1,
+ .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL,
+#ifdef CONFIG_S5PV310_SDHCI_CH0_8BIT
+ .max_width = 8,
+ .host_caps = MMC_CAP_8_BIT_DATA,
+#endif
+};
+
+static struct s3c_sdhci_platdata smdkc210_hsmmc1_pdata __initdata = {
+ .cd_type = S3C_SDHCI_CD_GPIO,
+ .ext_cd_gpio = S5PV310_GPK0(2),
+ .ext_cd_gpio_invert = 1,
+ .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL,
+};
+
+static struct s3c_sdhci_platdata smdkc210_hsmmc2_pdata __initdata = {
+ .cd_type = S3C_SDHCI_CD_GPIO,
+ .ext_cd_gpio = S5PV310_GPK2(2),
+ .ext_cd_gpio_invert = 1,
+ .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL,
+#ifdef CONFIG_S5PV310_SDHCI_CH2_8BIT
+ .max_width = 8,
+ .host_caps = MMC_CAP_8_BIT_DATA,
+#endif
+};
+
+static struct s3c_sdhci_platdata smdkc210_hsmmc3_pdata __initdata = {
+ .cd_type = S3C_SDHCI_CD_GPIO,
+ .ext_cd_gpio = S5PV310_GPK2(2),
+ .ext_cd_gpio_invert = 1,
+ .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL,
+};
+
+static struct resource smdkc210_smsc911x_resources[] = {
+ [0] = {
+ .start = S5PV310_PA_SROM_BANK(1),
+ .end = S5PV310_PA_SROM_BANK(1) + SZ_64K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_EINT(5),
+ .end = IRQ_EINT(5),
+ .flags = IORESOURCE_IRQ | IRQF_TRIGGER_LOW,
+ },
+};
+
+static struct smsc911x_platform_config smsc9215_config = {
+ .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_HIGH,
+ .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL,
+ .flags = SMSC911X_USE_16BIT | SMSC911X_FORCE_INTERNAL_PHY,
+ .phy_interface = PHY_INTERFACE_MODE_MII,
+ .mac = {0x00, 0x80, 0x00, 0x23, 0x45, 0x67},
+};
+
+static struct platform_device smdkc210_smsc911x = {
+ .name = "smsc911x",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(smdkc210_smsc911x_resources),
+ .resource = smdkc210_smsc911x_resources,
+ .dev = {
+ .platform_data = &smsc9215_config,
+ },
+};
+
+static struct platform_device *smdkc210_devices[] __initdata = {
+ &s3c_device_hsmmc0,
+ &s3c_device_hsmmc1,
+ &s3c_device_hsmmc2,
+ &s3c_device_hsmmc3,
+ &s3c_device_rtc,
+ &s3c_device_wdt,
+ &smdkc210_smsc911x,
+};
+
+static void __init smdkc210_smsc911x_init(void)
+{
+ u32 cs1;
+
+ /* configure nCS1 width to 16 bits */
+ cs1 = __raw_readl(S5PV310_SROM_BW) &
+ ~(S5PV310_SROM_BW__CS_MASK <<
+ S5PV310_SROM_BW__NCS1__SHIFT);
+ cs1 |= ((1 << S5PV310_SROM_BW__DATAWIDTH__SHIFT) |
+ (1 << S5PV310_SROM_BW__WAITENABLE__SHIFT) |
+ (1 << S5PV310_SROM_BW__BYTEENABLE__SHIFT)) <<
+ S5PV310_SROM_BW__NCS1__SHIFT;
+ __raw_writel(cs1, S5PV310_SROM_BW);
+
+ /* set timing for nCS1 suitable for ethernet chip */
+ __raw_writel((0x1 << S5PV310_SROM_BCX__PMC__SHIFT) |
+ (0x9 << S5PV310_SROM_BCX__TACP__SHIFT) |
+ (0xc << S5PV310_SROM_BCX__TCAH__SHIFT) |
+ (0x1 << S5PV310_SROM_BCX__TCOH__SHIFT) |
+ (0x6 << S5PV310_SROM_BCX__TACC__SHIFT) |
+ (0x1 << S5PV310_SROM_BCX__TCOS__SHIFT) |
+ (0x1 << S5PV310_SROM_BCX__TACS__SHIFT), S5PV310_SROM_BC1);
+}
+
+static void __init smdkc210_map_io(void)
+{
+ s5p_init_io(NULL, 0, S5P_VA_CHIPID);
+ s3c24xx_init_clocks(24000000);
+ s3c24xx_init_uarts(smdkc210_uartcfgs, ARRAY_SIZE(smdkc210_uartcfgs));
+}
+
+static void __init smdkc210_machine_init(void)
+{
+ smdkc210_smsc911x_init();
+
+ s3c_sdhci0_set_platdata(&smdkc210_hsmmc0_pdata);
+ s3c_sdhci1_set_platdata(&smdkc210_hsmmc1_pdata);
+ s3c_sdhci2_set_platdata(&smdkc210_hsmmc2_pdata);
+ s3c_sdhci3_set_platdata(&smdkc210_hsmmc3_pdata);
+
+ platform_add_devices(smdkc210_devices, ARRAY_SIZE(smdkc210_devices));
+}
+
+MACHINE_START(SMDKC210, "SMDKC210")
+ /* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
+ .boot_params = S5P_PA_SDRAM + 0x100,
+ .init_irq = s5pv310_init_irq,
+ .map_io = smdkc210_map_io,
+ .init_machine = smdkc210_machine_init,
+ .timer = &s5pv310_timer,
+MACHINE_END
diff --git a/arch/arm/mach-s5pv310/mach-smdkv310.c b/arch/arm/mach-s5pv310/mach-smdkv310.c
index 46215a14b3b..35826d66632 100644
--- a/arch/arm/mach-s5pv310/mach-smdkv310.c
+++ b/arch/arm/mach-s5pv310/mach-smdkv310.c
@@ -9,16 +9,23 @@
*/
#include <linux/serial_core.h>
+#include <linux/gpio.h>
+#include <linux/mmc/host.h>
+#include <linux/platform_device.h>
+#include <linux/smsc911x.h>
+#include <linux/io.h>
#include <asm/mach/arch.h>
#include <asm/mach-types.h>
-#include <asm/hardware/cache-l2x0.h>
#include <plat/regs-serial.h>
#include <plat/s5pv310.h>
#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/sdhci.h>
#include <mach/map.h>
+#include <mach/regs-srom.h>
/* Following are default values for UCON, ULCON and UFCON UART registers */
#define SMDKV310_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
@@ -65,6 +72,107 @@ static struct s3c2410_uartcfg smdkv310_uartcfgs[] __initdata = {
},
};
+static struct s3c_sdhci_platdata smdkv310_hsmmc0_pdata __initdata = {
+ .cd_type = S3C_SDHCI_CD_GPIO,
+ .ext_cd_gpio = S5PV310_GPK0(2),
+ .ext_cd_gpio_invert = 1,
+ .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL,
+#ifdef CONFIG_S5PV310_SDHCI_CH0_8BIT
+ .max_width = 8,
+ .host_caps = MMC_CAP_8_BIT_DATA,
+#endif
+};
+
+static struct s3c_sdhci_platdata smdkv310_hsmmc1_pdata __initdata = {
+ .cd_type = S3C_SDHCI_CD_GPIO,
+ .ext_cd_gpio = S5PV310_GPK0(2),
+ .ext_cd_gpio_invert = 1,
+ .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL,
+};
+
+static struct s3c_sdhci_platdata smdkv310_hsmmc2_pdata __initdata = {
+ .cd_type = S3C_SDHCI_CD_GPIO,
+ .ext_cd_gpio = S5PV310_GPK2(2),
+ .ext_cd_gpio_invert = 1,
+ .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL,
+#ifdef CONFIG_S5PV310_SDHCI_CH2_8BIT
+ .max_width = 8,
+ .host_caps = MMC_CAP_8_BIT_DATA,
+#endif
+};
+
+static struct s3c_sdhci_platdata smdkv310_hsmmc3_pdata __initdata = {
+ .cd_type = S3C_SDHCI_CD_GPIO,
+ .ext_cd_gpio = S5PV310_GPK2(2),
+ .ext_cd_gpio_invert = 1,
+ .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL,
+};
+
+static struct resource smdkv310_smsc911x_resources[] = {
+ [0] = {
+ .start = S5PV310_PA_SROM_BANK(1),
+ .end = S5PV310_PA_SROM_BANK(1) + SZ_64K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_EINT(5),
+ .end = IRQ_EINT(5),
+ .flags = IORESOURCE_IRQ | IRQF_TRIGGER_LOW,
+ },
+};
+
+static struct smsc911x_platform_config smsc9215_config = {
+ .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_HIGH,
+ .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL,
+ .flags = SMSC911X_USE_16BIT | SMSC911X_FORCE_INTERNAL_PHY,
+ .phy_interface = PHY_INTERFACE_MODE_MII,
+ .mac = {0x00, 0x80, 0x00, 0x23, 0x45, 0x67},
+};
+
+static struct platform_device smdkv310_smsc911x = {
+ .name = "smsc911x",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(smdkv310_smsc911x_resources),
+ .resource = smdkv310_smsc911x_resources,
+ .dev = {
+ .platform_data = &smsc9215_config,
+ },
+};
+
+static struct platform_device *smdkv310_devices[] __initdata = {
+ &s3c_device_hsmmc0,
+ &s3c_device_hsmmc1,
+ &s3c_device_hsmmc2,
+ &s3c_device_hsmmc3,
+ &s3c_device_rtc,
+ &s3c_device_wdt,
+ &smdkv310_smsc911x,
+};
+
+static void __init smdkv310_smsc911x_init(void)
+{
+ u32 cs1;
+
+ /* configure nCS1 width to 16 bits */
+ cs1 = __raw_readl(S5PV310_SROM_BW) &
+ ~(S5PV310_SROM_BW__CS_MASK <<
+ S5PV310_SROM_BW__NCS1__SHIFT);
+ cs1 |= ((1 << S5PV310_SROM_BW__DATAWIDTH__SHIFT) |
+ (1 << S5PV310_SROM_BW__WAITENABLE__SHIFT) |
+ (1 << S5PV310_SROM_BW__BYTEENABLE__SHIFT)) <<
+ S5PV310_SROM_BW__NCS1__SHIFT;
+ __raw_writel(cs1, S5PV310_SROM_BW);
+
+ /* set timing for nCS1 suitable for ethernet chip */
+ __raw_writel((0x1 << S5PV310_SROM_BCX__PMC__SHIFT) |
+ (0x9 << S5PV310_SROM_BCX__TACP__SHIFT) |
+ (0xc << S5PV310_SROM_BCX__TCAH__SHIFT) |
+ (0x1 << S5PV310_SROM_BCX__TCOH__SHIFT) |
+ (0x6 << S5PV310_SROM_BCX__TACC__SHIFT) |
+ (0x1 << S5PV310_SROM_BCX__TCOS__SHIFT) |
+ (0x1 << S5PV310_SROM_BCX__TACS__SHIFT), S5PV310_SROM_BC1);
+}
+
static void __init smdkv310_map_io(void)
{
s5p_init_io(NULL, 0, S5P_VA_CHIPID);
@@ -74,9 +182,14 @@ static void __init smdkv310_map_io(void)
static void __init smdkv310_machine_init(void)
{
-#ifdef CONFIG_CACHE_L2X0
- l2x0_init(S5P_VA_L2CC, 1 << 28, 0xffffffff);
-#endif
+ smdkv310_smsc911x_init();
+
+ s3c_sdhci0_set_platdata(&smdkv310_hsmmc0_pdata);
+ s3c_sdhci1_set_platdata(&smdkv310_hsmmc1_pdata);
+ s3c_sdhci2_set_platdata(&smdkv310_hsmmc2_pdata);
+ s3c_sdhci3_set_platdata(&smdkv310_hsmmc3_pdata);
+
+ platform_add_devices(smdkv310_devices, ARRAY_SIZE(smdkv310_devices));
}
MACHINE_START(SMDKV310, "SMDKV310")
diff --git a/arch/arm/mach-s5pv310/mach-universal_c210.c b/arch/arm/mach-s5pv310/mach-universal_c210.c
index d7c2ec770f8..16d8fc00caf 100644
--- a/arch/arm/mach-s5pv310/mach-universal_c210.c
+++ b/arch/arm/mach-s5pv310/mach-universal_c210.c
@@ -7,15 +7,20 @@
* published by the Free Software Foundation.
*/
+#include <linux/platform_device.h>
#include <linux/serial_core.h>
+#include <linux/input.h>
+#include <linux/i2c.h>
+#include <linux/gpio_keys.h>
+#include <linux/gpio.h>
#include <asm/mach/arch.h>
#include <asm/mach-types.h>
-#include <asm/hardware/cache-l2x0.h>
#include <plat/regs-serial.h>
#include <plat/s5pv310.h>
#include <plat/cpu.h>
+#include <plat/devs.h>
#include <mach/map.h>
@@ -60,6 +65,72 @@ static struct s3c2410_uartcfg universal_uartcfgs[] __initdata = {
},
};
+static struct gpio_keys_button universal_gpio_keys_tables[] = {
+ {
+ .code = KEY_VOLUMEUP,
+ .gpio = S5PV310_GPX2(0), /* XEINT16 */
+ .desc = "gpio-keys: KEY_VOLUMEUP",
+ .type = EV_KEY,
+ .active_low = 1,
+ .debounce_interval = 1,
+ }, {
+ .code = KEY_VOLUMEDOWN,
+ .gpio = S5PV310_GPX2(1), /* XEINT17 */
+ .desc = "gpio-keys: KEY_VOLUMEDOWN",
+ .type = EV_KEY,
+ .active_low = 1,
+ .debounce_interval = 1,
+ }, {
+ .code = KEY_CONFIG,
+ .gpio = S5PV310_GPX2(2), /* XEINT18 */
+ .desc = "gpio-keys: KEY_CONFIG",
+ .type = EV_KEY,
+ .active_low = 1,
+ .debounce_interval = 1,
+ }, {
+ .code = KEY_CAMERA,
+ .gpio = S5PV310_GPX2(3), /* XEINT19 */
+ .desc = "gpio-keys: KEY_CAMERA",
+ .type = EV_KEY,
+ .active_low = 1,
+ .debounce_interval = 1,
+ }, {
+ .code = KEY_OK,
+ .gpio = S5PV310_GPX3(5), /* XEINT29 */
+ .desc = "gpio-keys: KEY_OK",
+ .type = EV_KEY,
+ .active_low = 1,
+ .debounce_interval = 1,
+ },
+};
+
+static struct gpio_keys_platform_data universal_gpio_keys_data = {
+ .buttons = universal_gpio_keys_tables,
+ .nbuttons = ARRAY_SIZE(universal_gpio_keys_tables),
+};
+
+static struct platform_device universal_gpio_keys = {
+ .name = "gpio-keys",
+ .dev = {
+ .platform_data = &universal_gpio_keys_data,
+ },
+};
+
+/* I2C0 */
+static struct i2c_board_info i2c0_devs[] __initdata = {
+ /* Camera, To be updated */
+};
+
+/* I2C1 */
+static struct i2c_board_info i2c1_devs[] __initdata = {
+ /* Gyro, To be updated */
+};
+
+static struct platform_device *universal_devices[] __initdata = {
+ &universal_gpio_keys,
+ &s5p_device_onenand,
+};
+
static void __init universal_map_io(void)
{
s5p_init_io(NULL, 0, S5P_VA_CHIPID);
@@ -69,9 +140,11 @@ static void __init universal_map_io(void)
static void __init universal_machine_init(void)
{
-#ifdef CONFIG_CACHE_L2X0
- l2x0_init(S5P_VA_L2CC, 1 << 28, 0xffffffff);
-#endif
+ i2c_register_board_info(0, i2c0_devs, ARRAY_SIZE(i2c0_devs));
+ i2c_register_board_info(1, i2c1_devs, ARRAY_SIZE(i2c1_devs));
+
+ /* Last */
+ platform_add_devices(universal_devices, ARRAY_SIZE(universal_devices));
}
MACHINE_START(UNIVERSAL_C210, "UNIVERSAL_C210")
diff --git a/arch/arm/mach-s5pv310/setup-i2c0.c b/arch/arm/mach-s5pv310/setup-i2c0.c
index 43671280738..f47f8f3152e 100644
--- a/arch/arm/mach-s5pv310/setup-i2c0.c
+++ b/arch/arm/mach-s5pv310/setup-i2c0.c
@@ -21,8 +21,6 @@ struct platform_device; /* don't need the contents */
void s3c_i2c0_cfg_gpio(struct platform_device *dev)
{
- s3c_gpio_cfgpin(S5PV310_GPD1(0), S3C_GPIO_SFN(2));
- s3c_gpio_setpull(S5PV310_GPD1(0), S3C_GPIO_PULL_UP);
- s3c_gpio_cfgpin(S5PV310_GPD1(1), S3C_GPIO_SFN(2));
- s3c_gpio_setpull(S5PV310_GPD1(1), S3C_GPIO_PULL_UP);
+ s3c_gpio_cfgall_range(S5PV310_GPD1(0), 2,
+ S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
}
diff --git a/arch/arm/mach-s5pv310/setup-i2c1.c b/arch/arm/mach-s5pv310/setup-i2c1.c
index 1ecd5bc35b5..9d07e4e2f14 100644
--- a/arch/arm/mach-s5pv310/setup-i2c1.c
+++ b/arch/arm/mach-s5pv310/setup-i2c1.c
@@ -18,8 +18,6 @@ struct platform_device; /* don't need the contents */
void s3c_i2c1_cfg_gpio(struct platform_device *dev)
{
- s3c_gpio_cfgpin(S5PV310_GPD1(2), S3C_GPIO_SFN(2));
- s3c_gpio_setpull(S5PV310_GPD1(2), S3C_GPIO_PULL_UP);
- s3c_gpio_cfgpin(S5PV310_GPD1(3), S3C_GPIO_SFN(2));
- s3c_gpio_setpull(S5PV310_GPD1(3), S3C_GPIO_PULL_UP);
+ s3c_gpio_cfgall_range(S5PV310_GPD1(2), 2,
+ S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
}
diff --git a/arch/arm/mach-s5pv310/setup-i2c2.c b/arch/arm/mach-s5pv310/setup-i2c2.c
index 4c0d8def660..4163b1233da 100644
--- a/arch/arm/mach-s5pv310/setup-i2c2.c
+++ b/arch/arm/mach-s5pv310/setup-i2c2.c
@@ -18,8 +18,6 @@ struct platform_device; /* don't need the contents */
void s3c_i2c2_cfg_gpio(struct platform_device *dev)
{
- s3c_gpio_cfgpin(S5PV310_GPA0(6), S3C_GPIO_SFN(3));
- s3c_gpio_setpull(S5PV310_GPA0(6), S3C_GPIO_PULL_UP);
- s3c_gpio_cfgpin(S5PV310_GPA0(7), S3C_GPIO_SFN(3));
- s3c_gpio_setpull(S5PV310_GPA0(7), S3C_GPIO_PULL_UP);
+ s3c_gpio_cfgall_range(S5PV310_GPA0(6), 2,
+ S3C_GPIO_SFN(3), S3C_GPIO_PULL_UP);
}
diff --git a/arch/arm/mach-s5pv310/setup-i2c3.c b/arch/arm/mach-s5pv310/setup-i2c3.c
new file mode 100644
index 00000000000..180f153d2a2
--- /dev/null
+++ b/arch/arm/mach-s5pv310/setup-i2c3.c
@@ -0,0 +1,23 @@
+/*
+ * linux/arch/arm/mach-s5pv310/setup-i2c3.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *
+ * I2C3 GPIO configuration.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+struct platform_device; /* don't need the contents */
+
+#include <linux/gpio.h>
+#include <plat/iic.h>
+#include <plat/gpio-cfg.h>
+
+void s3c_i2c3_cfg_gpio(struct platform_device *dev)
+{
+ s3c_gpio_cfgall_range(S5PV310_GPA1(2), 2,
+ S3C_GPIO_SFN(3), S3C_GPIO_PULL_UP);
+}
diff --git a/arch/arm/mach-s5pv310/setup-i2c4.c b/arch/arm/mach-s5pv310/setup-i2c4.c
new file mode 100644
index 00000000000..909e8dfc531
--- /dev/null
+++ b/arch/arm/mach-s5pv310/setup-i2c4.c
@@ -0,0 +1,23 @@
+/*
+ * linux/arch/arm/mach-s5pv310/setup-i2c4.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *
+ * I2C4 GPIO configuration.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+struct platform_device; /* don't need the contents */
+
+#include <linux/gpio.h>
+#include <plat/iic.h>
+#include <plat/gpio-cfg.h>
+
+void s3c_i2c4_cfg_gpio(struct platform_device *dev)
+{
+ s3c_gpio_cfgall_range(S5PV310_GPB(2), 2,
+ S3C_GPIO_SFN(3), S3C_GPIO_PULL_UP);
+}
diff --git a/arch/arm/mach-s5pv310/setup-i2c5.c b/arch/arm/mach-s5pv310/setup-i2c5.c
new file mode 100644
index 00000000000..5d0fa4ac028
--- /dev/null
+++ b/arch/arm/mach-s5pv310/setup-i2c5.c
@@ -0,0 +1,23 @@
+/*
+ * linux/arch/arm/mach-s5pv310/setup-i2c5.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *
+ * I2C5 GPIO configuration.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+struct platform_device; /* don't need the contents */
+
+#include <linux/gpio.h>
+#include <plat/iic.h>
+#include <plat/gpio-cfg.h>
+
+void s3c_i2c5_cfg_gpio(struct platform_device *dev)
+{
+ s3c_gpio_cfgall_range(S5PV310_GPB(6), 2,
+ S3C_GPIO_SFN(3), S3C_GPIO_PULL_UP);
+}
diff --git a/arch/arm/mach-s5pv310/setup-i2c6.c b/arch/arm/mach-s5pv310/setup-i2c6.c
new file mode 100644
index 00000000000..34aafab92ac
--- /dev/null
+++ b/arch/arm/mach-s5pv310/setup-i2c6.c
@@ -0,0 +1,23 @@
+/*
+ * linux/arch/arm/mach-s5pv310/setup-i2c6.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *
+ * I2C6 GPIO configuration.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+struct platform_device; /* don't need the contents */
+
+#include <linux/gpio.h>
+#include <plat/iic.h>
+#include <plat/gpio-cfg.h>
+
+void s3c_i2c6_cfg_gpio(struct platform_device *dev)
+{
+ s3c_gpio_cfgall_range(S5PV310_GPC1(3), 2,
+ S3C_GPIO_SFN(4), S3C_GPIO_PULL_UP);
+}
diff --git a/arch/arm/mach-s5pv310/setup-i2c7.c b/arch/arm/mach-s5pv310/setup-i2c7.c
new file mode 100644
index 00000000000..9b25b8d1892
--- /dev/null
+++ b/arch/arm/mach-s5pv310/setup-i2c7.c
@@ -0,0 +1,23 @@
+/*
+ * linux/arch/arm/mach-s5pv310/setup-i2c7.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *
+ * I2C7 GPIO configuration.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+struct platform_device; /* don't need the contents */
+
+#include <linux/gpio.h>
+#include <plat/iic.h>
+#include <plat/gpio-cfg.h>
+
+void s3c_i2c7_cfg_gpio(struct platform_device *dev)
+{
+ s3c_gpio_cfgall_range(S5PV310_GPD0(2), 2,
+ S3C_GPIO_SFN(3), S3C_GPIO_PULL_UP);
+}
diff --git a/arch/arm/mach-s5pv310/setup-sdhci-gpio.c b/arch/arm/mach-s5pv310/setup-sdhci-gpio.c
new file mode 100644
index 00000000000..86d38cc4913
--- /dev/null
+++ b/arch/arm/mach-s5pv310/setup-sdhci-gpio.c
@@ -0,0 +1,152 @@
+/* linux/arch/arm/mach-s5pv310/setup-sdhci-gpio.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * S5PV310 - Helper functions for setting up SDHCI device(s) GPIO (HSMMC)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+#include <linux/mmc/host.h>
+#include <linux/mmc/card.h>
+
+#include <plat/gpio-cfg.h>
+#include <plat/regs-sdhci.h>
+#include <plat/sdhci.h>
+
+void s5pv310_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width)
+{
+ struct s3c_sdhci_platdata *pdata = dev->dev.platform_data;
+ unsigned int gpio;
+
+ /* Set all the necessary GPK0[0:1] pins to special-function 2 */
+ for (gpio = S5PV310_GPK0(0); gpio < S5PV310_GPK0(2); gpio++) {
+ s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+ s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+ s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
+ }
+
+ switch (width) {
+ case 8:
+ for (gpio = S5PV310_GPK1(3); gpio <= S5PV310_GPK1(6); gpio++) {
+ /* Data pin GPK1[3:6] to special-funtion 3 */
+ s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(3));
+ s3c_gpio_setpull(gpio, S3C_GPIO_PULL_UP);
+ s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
+ }
+ case 4:
+ for (gpio = S5PV310_GPK0(3); gpio <= S5PV310_GPK0(6); gpio++) {
+ /* Data pin GPK0[3:6] to special-funtion 2 */
+ s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+ s3c_gpio_setpull(gpio, S3C_GPIO_PULL_UP);
+ s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
+ }
+ default:
+ break;
+ }
+
+ if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) {
+ s3c_gpio_cfgpin(S5PV310_GPK0(2), S3C_GPIO_SFN(2));
+ s3c_gpio_setpull(S5PV310_GPK0(2), S3C_GPIO_PULL_UP);
+ s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
+ }
+}
+
+void s5pv310_setup_sdhci1_cfg_gpio(struct platform_device *dev, int width)
+{
+ struct s3c_sdhci_platdata *pdata = dev->dev.platform_data;
+ unsigned int gpio;
+
+ /* Set all the necessary GPK1[0:1] pins to special-function 2 */
+ for (gpio = S5PV310_GPK1(0); gpio < S5PV310_GPK1(2); gpio++) {
+ s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+ s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+ s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
+ }
+
+ for (gpio = S5PV310_GPK1(3); gpio <= S5PV310_GPK1(6); gpio++) {
+ /* Data pin GPK1[3:6] to special-function 2 */
+ s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+ s3c_gpio_setpull(gpio, S3C_GPIO_PULL_UP);
+ s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
+ }
+
+ if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) {
+ s3c_gpio_cfgpin(S5PV310_GPK1(2), S3C_GPIO_SFN(2));
+ s3c_gpio_setpull(S5PV310_GPK1(2), S3C_GPIO_PULL_UP);
+ s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
+ }
+}
+
+void s5pv310_setup_sdhci2_cfg_gpio(struct platform_device *dev, int width)
+{
+ struct s3c_sdhci_platdata *pdata = dev->dev.platform_data;
+ unsigned int gpio;
+
+ /* Set all the necessary GPK2[0:1] pins to special-function 2 */
+ for (gpio = S5PV310_GPK2(0); gpio < S5PV310_GPK2(2); gpio++) {
+ s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+ s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+ s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
+ }
+
+ switch (width) {
+ case 8:
+ for (gpio = S5PV310_GPK3(3); gpio <= S5PV310_GPK3(6); gpio++) {
+ /* Data pin GPK3[3:6] to special-function 3 */
+ s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(3));
+ s3c_gpio_setpull(gpio, S3C_GPIO_PULL_UP);
+ s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
+ }
+ case 4:
+ for (gpio = S5PV310_GPK2(3); gpio <= S5PV310_GPK2(6); gpio++) {
+ /* Data pin GPK2[3:6] to special-function 2 */
+ s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+ s3c_gpio_setpull(gpio, S3C_GPIO_PULL_UP);
+ s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
+ }
+ default:
+ break;
+ }
+
+ if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) {
+ s3c_gpio_cfgpin(S5PV310_GPK2(2), S3C_GPIO_SFN(2));
+ s3c_gpio_setpull(S5PV310_GPK2(2), S3C_GPIO_PULL_UP);
+ s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
+ }
+}
+
+void s5pv310_setup_sdhci3_cfg_gpio(struct platform_device *dev, int width)
+{
+ struct s3c_sdhci_platdata *pdata = dev->dev.platform_data;
+ unsigned int gpio;
+
+ /* Set all the necessary GPK3[0:1] pins to special-function 2 */
+ for (gpio = S5PV310_GPK3(0); gpio < S5PV310_GPK3(2); gpio++) {
+ s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+ s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+ s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
+ }
+
+ for (gpio = S5PV310_GPK3(3); gpio <= S5PV310_GPK3(6); gpio++) {
+ /* Data pin GPK3[3:6] to special-function 2 */
+ s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+ s3c_gpio_setpull(gpio, S3C_GPIO_PULL_UP);
+ s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
+ }
+
+ if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) {
+ s3c_gpio_cfgpin(S5PV310_GPK3(2), S3C_GPIO_SFN(2));
+ s3c_gpio_setpull(S5PV310_GPK3(2), S3C_GPIO_PULL_UP);
+ s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
+ }
+}
diff --git a/arch/arm/mach-s5pv310/setup-sdhci.c b/arch/arm/mach-s5pv310/setup-sdhci.c
new file mode 100644
index 00000000000..db8358fc466
--- /dev/null
+++ b/arch/arm/mach-s5pv310/setup-sdhci.c
@@ -0,0 +1,69 @@
+/* linux/arch/arm/mach-s5pv310/setup-sdhci.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * S5PV310 - Helper functions for settign up SDHCI device(s) (HSMMC)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+
+#include <linux/mmc/card.h>
+#include <linux/mmc/host.h>
+
+#include <plat/regs-sdhci.h>
+
+/* clock sources for the mmc bus clock, order as for the ctrl2[5..4] */
+
+char *s5pv310_hsmmc_clksrcs[4] = {
+ [0] = NULL,
+ [1] = NULL,
+ [2] = "sclk_mmc", /* mmc_bus */
+ [3] = NULL,
+};
+
+void s5pv310_setup_sdhci_cfg_card(struct platform_device *dev, void __iomem *r,
+ struct mmc_ios *ios, struct mmc_card *card)
+{
+ u32 ctrl2, ctrl3;
+
+ /* don't need to alter anything acording to card-type */
+
+ ctrl2 = readl(r + S3C_SDHCI_CONTROL2);
+
+ /* select base clock source to HCLK */
+
+ ctrl2 &= S3C_SDHCI_CTRL2_SELBASECLK_MASK;
+
+ /*
+ * clear async mode, enable conflict mask, rx feedback ctrl, SD
+ * clk hold and no use debounce count
+ */
+
+ ctrl2 |= (S3C64XX_SDHCI_CTRL2_ENSTAASYNCCLR |
+ S3C64XX_SDHCI_CTRL2_ENCMDCNFMSK |
+ S3C_SDHCI_CTRL2_ENFBCLKRX |
+ S3C_SDHCI_CTRL2_DFCNT_NONE |
+ S3C_SDHCI_CTRL2_ENCLKOUTHOLD);
+
+ /* Tx and Rx feedback clock delay control */
+
+ if (ios->clock < 25 * 1000000)
+ ctrl3 = (S3C_SDHCI_CTRL3_FCSEL3 |
+ S3C_SDHCI_CTRL3_FCSEL2 |
+ S3C_SDHCI_CTRL3_FCSEL1 |
+ S3C_SDHCI_CTRL3_FCSEL0);
+ else
+ ctrl3 = (S3C_SDHCI_CTRL3_FCSEL1 | S3C_SDHCI_CTRL3_FCSEL0);
+
+ writel(ctrl2, r + S3C_SDHCI_CONTROL2);
+ writel(ctrl3, r + S3C_SDHCI_CONTROL3);
+}
diff --git a/arch/arm/mach-sa1100/cpu-sa1100.c b/arch/arm/mach-sa1100/cpu-sa1100.c
index c0a13ef5436..96f7dc103b5 100644
--- a/arch/arm/mach-sa1100/cpu-sa1100.c
+++ b/arch/arm/mach-sa1100/cpu-sa1100.c
@@ -184,16 +184,15 @@ static int sa1100_target(struct cpufreq_policy *policy,
{
unsigned int cur = sa11x0_getspeed(0);
unsigned int new_ppcr;
-
struct cpufreq_freqs freqs;
+
+ new_ppcr = sa11x0_freq_to_ppcr(target_freq);
switch(relation){
case CPUFREQ_RELATION_L:
- new_ppcr = sa11x0_freq_to_ppcr(target_freq);
if (sa11x0_ppcr_to_freq(new_ppcr) > policy->max)
new_ppcr--;
break;
case CPUFREQ_RELATION_H:
- new_ppcr = sa11x0_freq_to_ppcr(target_freq);
if ((sa11x0_ppcr_to_freq(new_ppcr) > target_freq) &&
(sa11x0_ppcr_to_freq(new_ppcr - 1) >= policy->min))
new_ppcr--;
diff --git a/arch/arm/mach-shmobile/board-ap4evb.c b/arch/arm/mach-shmobile/board-ap4evb.c
index 22a2b44ddb7..46ca4d4abf9 100644
--- a/arch/arm/mach-shmobile/board-ap4evb.c
+++ b/arch/arm/mach-shmobile/board-ap4evb.c
@@ -30,7 +30,6 @@
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/physmap.h>
-#include <linux/mmc/host.h>
#include <linux/mmc/sh_mmcif.h>
#include <linux/i2c.h>
#include <linux/i2c/tsc2007.h>
@@ -44,6 +43,10 @@
#include <linux/input/sh_keysc.h>
#include <linux/usb/r8a66597.h>
+#include <media/sh_mobile_ceu.h>
+#include <media/sh_mobile_csi2.h>
+#include <media/soc_camera.h>
+
#include <sound/sh_fsi.h>
#include <video/sh_mobile_hdmi.h>
@@ -250,7 +253,7 @@ static int slot_cn7_get_cd(struct platform_device *pdev)
/* SH_MMCIF */
static struct resource sh_mmcif_resources[] = {
[0] = {
- .name = "SH_MMCIF",
+ .name = "MMCIF",
.start = 0xE6BD0000,
.end = 0xE6BD00FF,
.flags = IORESOURCE_MEM,
@@ -390,10 +393,40 @@ static struct platform_device usb1_host_device = {
.resource = usb1_host_resources,
};
+const static struct fb_videomode ap4evb_lcdc_modes[] = {
+ {
+#ifdef CONFIG_AP4EVB_QHD
+ .name = "R63302(QHD)",
+ .xres = 544,
+ .yres = 961,
+ .left_margin = 72,
+ .right_margin = 600,
+ .hsync_len = 16,
+ .upper_margin = 8,
+ .lower_margin = 8,
+ .vsync_len = 2,
+ .sync = FB_SYNC_VERT_HIGH_ACT | FB_SYNC_HOR_HIGH_ACT,
+#else
+ .name = "WVGA Panel",
+ .xres = 800,
+ .yres = 480,
+ .left_margin = 220,
+ .right_margin = 110,
+ .hsync_len = 70,
+ .upper_margin = 20,
+ .lower_margin = 5,
+ .vsync_len = 5,
+ .sync = 0,
+#endif
+ },
+};
+
static struct sh_mobile_lcdc_info lcdc_info = {
.ch[0] = {
.chan = LCDC_CHAN_MAINLCD,
.bpp = 16,
+ .lcd_cfg = ap4evb_lcdc_modes,
+ .num_cfg = ARRAY_SIZE(ap4evb_lcdc_modes),
}
};
@@ -532,27 +565,6 @@ static struct platform_device *qhd_devices[] __initdata = {
/* FSI */
#define IRQ_FSI evt2irq(0x1840)
-#define FSIACKCR 0xE6150018
-static void fsiackcr_init(struct clk *clk)
-{
- u32 status = __raw_readl(clk->enable_reg);
-
- /* use external clock */
- status &= ~0x000000ff;
- status |= 0x00000080;
- __raw_writel(status, clk->enable_reg);
-}
-
-static struct clk_ops fsiackcr_clk_ops = {
- .init = fsiackcr_init,
-};
-
-static struct clk fsiackcr_clk = {
- .ops = &fsiackcr_clk_ops,
- .enable_reg = (void __iomem *)FSIACKCR,
- .rate = 0, /* unknown */
-};
-
static struct sh_fsi_platform_info fsi_info = {
.porta_flags = SH_FSI_BRS_INV |
SH_FSI_OUT_SLAVE_MODE |
@@ -592,26 +604,6 @@ static struct sh_mobile_lcdc_info sh_mobile_lcdc1_info = {
.interface_type = RGB24,
.clock_divider = 1,
.flags = LCDC_FLAGS_DWPOL,
- .lcd_cfg = {
- .name = "HDMI",
- /* So far only 720p is supported */
- .xres = 1280,
- .yres = 720,
- /*
- * If left and right margins are not multiples of 8,
- * LDHAJR will be adjusted accordingly by the LCDC
- * driver. Until we start using EDID, these values
- * might have to be adjusted for different monitors.
- */
- .left_margin = 200,
- .right_margin = 88,
- .hsync_len = 48,
- .upper_margin = 20,
- .lower_margin = 5,
- .vsync_len = 5,
- .pixclock = 13468,
- .sync = FB_SYNC_VERT_HIGH_ACT | FB_SYNC_HOR_HIGH_ACT,
- },
}
};
@@ -623,7 +615,7 @@ static struct resource lcdc1_resources[] = {
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = intcs_evt2irq(0x17a0),
+ .start = intcs_evt2irq(0x1780),
.flags = IORESOURCE_IRQ,
},
};
@@ -704,6 +696,95 @@ static struct platform_device leds_device = {
},
};
+static struct i2c_board_info imx074_info = {
+ I2C_BOARD_INFO("imx074", 0x1a),
+};
+
+struct soc_camera_link imx074_link = {
+ .bus_id = 0,
+ .board_info = &imx074_info,
+ .i2c_adapter_id = 0,
+ .module_name = "imx074",
+};
+
+static struct platform_device ap4evb_camera = {
+ .name = "soc-camera-pdrv",
+ .id = 0,
+ .dev = {
+ .platform_data = &imx074_link,
+ },
+};
+
+static struct sh_csi2_client_config csi2_clients[] = {
+ {
+ .phy = SH_CSI2_PHY_MAIN,
+ .lanes = 3,
+ .channel = 0,
+ .pdev = &ap4evb_camera,
+ },
+};
+
+static struct sh_csi2_pdata csi2_info = {
+ .type = SH_CSI2C,
+ .clients = csi2_clients,
+ .num_clients = ARRAY_SIZE(csi2_clients),
+ .flags = SH_CSI2_ECC | SH_CSI2_CRC,
+};
+
+static struct resource csi2_resources[] = {
+ [0] = {
+ .name = "CSI2",
+ .start = 0xffc90000,
+ .end = 0xffc90fff,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = intcs_evt2irq(0x17a0),
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device csi2_device = {
+ .name = "sh-mobile-csi2",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(csi2_resources),
+ .resource = csi2_resources,
+ .dev = {
+ .platform_data = &csi2_info,
+ },
+};
+
+static struct sh_mobile_ceu_info sh_mobile_ceu_info = {
+ .flags = SH_CEU_FLAG_USE_8BIT_BUS,
+ .csi2_dev = &csi2_device.dev,
+};
+
+static struct resource ceu_resources[] = {
+ [0] = {
+ .name = "CEU",
+ .start = 0xfe910000,
+ .end = 0xfe91009f,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = intcs_evt2irq(0x880),
+ .flags = IORESOURCE_IRQ,
+ },
+ [2] = {
+ /* place holder for contiguous memory */
+ },
+};
+
+static struct platform_device ceu_device = {
+ .name = "sh_mobile_ceu",
+ .id = 0, /* "ceu0" clock */
+ .num_resources = ARRAY_SIZE(ceu_resources),
+ .resource = ceu_resources,
+ .dev = {
+ .platform_data = &sh_mobile_ceu_info,
+ },
+};
+
static struct platform_device *ap4evb_devices[] __initdata = {
&leds_device,
&nor_flash_device,
@@ -716,6 +797,9 @@ static struct platform_device *ap4evb_devices[] __initdata = {
&lcdc1_device,
&lcdc_device,
&hdmi_device,
+ &csi2_device,
+ &ceu_device,
+ &ap4evb_camera,
};
static int __init hdmi_init_pm_clock(void)
@@ -730,22 +814,22 @@ static int __init hdmi_init_pm_clock(void)
goto out;
}
- ret = clk_set_parent(&pllc2_clk, &dv_clki_div2_clk);
+ ret = clk_set_parent(&sh7372_pllc2_clk, &sh7372_dv_clki_div2_clk);
if (ret < 0) {
- pr_err("Cannot set PLLC2 parent: %d, %d users\n", ret, pllc2_clk.usecount);
+ pr_err("Cannot set PLLC2 parent: %d, %d users\n", ret, sh7372_pllc2_clk.usecount);
goto out;
}
- pr_debug("PLLC2 initial frequency %lu\n", clk_get_rate(&pllc2_clk));
+ pr_debug("PLLC2 initial frequency %lu\n", clk_get_rate(&sh7372_pllc2_clk));
- rate = clk_round_rate(&pllc2_clk, 594000000);
+ rate = clk_round_rate(&sh7372_pllc2_clk, 594000000);
if (rate < 0) {
pr_err("Cannot get suitable rate: %ld\n", rate);
ret = rate;
goto out;
}
- ret = clk_set_rate(&pllc2_clk, rate);
+ ret = clk_set_rate(&sh7372_pllc2_clk, rate);
if (ret < 0) {
pr_err("Cannot set rate %ld: %d\n", rate, ret);
goto out;
@@ -753,7 +837,7 @@ static int __init hdmi_init_pm_clock(void)
pr_debug("PLLC2 set frequency %lu\n", rate);
- ret = clk_set_parent(hdmi_ick, &pllc2_clk);
+ ret = clk_set_parent(hdmi_ick, &sh7372_pllc2_clk);
if (ret < 0) {
pr_err("Cannot set HDMI parent: %d\n", ret);
goto out;
@@ -767,11 +851,51 @@ out:
device_initcall(hdmi_init_pm_clock);
+#define FSIACK_DUMMY_RATE 48000
+static int __init fsi_init_pm_clock(void)
+{
+ struct clk *fsia_ick;
+ int ret;
+
+ /*
+ * FSIACK is connected to AK4642,
+ * and the rate is depend on playing sound rate.
+ * So, set dummy rate (= 48k) here
+ */
+ ret = clk_set_rate(&sh7372_fsiack_clk, FSIACK_DUMMY_RATE);
+ if (ret < 0) {
+ pr_err("Cannot set FSIACK dummy rate: %d\n", ret);
+ return ret;
+ }
+
+ fsia_ick = clk_get(&fsi_device.dev, "icka");
+ if (IS_ERR(fsia_ick)) {
+ ret = PTR_ERR(fsia_ick);
+ pr_err("Cannot get FSI ICK: %d\n", ret);
+ return ret;
+ }
+
+ ret = clk_set_parent(fsia_ick, &sh7372_fsiack_clk);
+ if (ret < 0) {
+ pr_err("Cannot set FSI-A parent: %d\n", ret);
+ goto out;
+ }
+
+ ret = clk_set_rate(fsia_ick, FSIACK_DUMMY_RATE);
+ if (ret < 0)
+ pr_err("Cannot set FSI-A rate: %d\n", ret);
+
+out:
+ clk_put(fsia_ick);
+
+ return ret;
+}
+device_initcall(fsi_init_pm_clock);
+
/*
* FIXME !!
*
* gpio_no_direction
- * gpio_pull_up
* are quick_hack.
*
* current gpio frame work doesn't have
@@ -783,49 +907,37 @@ static void __init gpio_no_direction(u32 addr)
__raw_writeb(0x00, addr);
}
-static void __init gpio_pull_up(u32 addr)
-{
- u8 data = __raw_readb(addr);
-
- data &= 0x0F;
- data |= 0xC0;
- __raw_writeb(data, addr);
-}
-
/* TouchScreen */
+#ifdef CONFIG_AP4EVB_QHD
+# define GPIO_TSC_IRQ GPIO_FN_IRQ28_123
+# define GPIO_TSC_PORT GPIO_PORT123
+#else /* WVGA */
+# define GPIO_TSC_IRQ GPIO_FN_IRQ7_40
+# define GPIO_TSC_PORT GPIO_PORT40
+#endif
+
#define IRQ28 evt2irq(0x3380) /* IRQ28A */
#define IRQ7 evt2irq(0x02e0) /* IRQ7A */
static int ts_get_pendown_state(void)
{
- int val1, val2;
+ int val;
- gpio_free(GPIO_FN_IRQ28_123);
- gpio_free(GPIO_FN_IRQ7_40);
+ gpio_free(GPIO_TSC_IRQ);
- gpio_request(GPIO_PORT123, NULL);
- gpio_request(GPIO_PORT40, NULL);
+ gpio_request(GPIO_TSC_PORT, NULL);
- gpio_direction_input(GPIO_PORT123);
- gpio_direction_input(GPIO_PORT40);
+ gpio_direction_input(GPIO_TSC_PORT);
- val1 = gpio_get_value(GPIO_PORT123);
- val2 = gpio_get_value(GPIO_PORT40);
+ val = gpio_get_value(GPIO_TSC_PORT);
- gpio_request(GPIO_FN_IRQ28_123, NULL); /* for QHD */
- gpio_request(GPIO_FN_IRQ7_40, NULL); /* for WVGA */
+ gpio_request(GPIO_TSC_IRQ, NULL);
- return val1 ^ val2;
+ return !val;
}
-#define PORT40CR 0xE6051028
-#define PORT123CR 0xE605007B
static int ts_init(void)
{
- gpio_request(GPIO_FN_IRQ28_123, NULL); /* for QHD */
- gpio_request(GPIO_FN_IRQ7_40, NULL); /* for WVGA */
-
- gpio_pull_up(PORT40CR);
- gpio_pull_up(PORT123CR);
+ gpio_request(GPIO_TSC_IRQ, NULL);
return 0;
}
@@ -974,14 +1086,6 @@ static void __init ap4evb_init(void)
clk_put(clk);
}
- /* change parent of FSI A */
- clk = clk_get(NULL, "fsia_clk");
- if (!IS_ERR(clk)) {
- clk_register(&fsiackcr_clk);
- clk_set_parent(clk, &fsiackcr_clk);
- clk_put(clk);
- }
-
/*
* set irq priority, to avoid sound chopping
* when NFS rootfs is used
@@ -996,8 +1100,10 @@ static void __init ap4evb_init(void)
ARRAY_SIZE(i2c1_devices));
#ifdef CONFIG_AP4EVB_QHD
+
/*
- * QHD
+ * For QHD Panel (MIPI-DSI, CONFIG_AP4EVB_QHD=y) and
+ * IRQ28 for Touch Panel, set dip switches S3, S43 as OFF, ON.
*/
/* enable KEYSC */
@@ -1023,17 +1129,6 @@ static void __init ap4evb_init(void)
lcdc_info.ch[0].interface_type = RGB24;
lcdc_info.ch[0].clock_divider = 1;
lcdc_info.ch[0].flags = LCDC_FLAGS_DWPOL;
- lcdc_info.ch[0].lcd_cfg.name = "R63302(QHD)";
- lcdc_info.ch[0].lcd_cfg.xres = 544;
- lcdc_info.ch[0].lcd_cfg.yres = 961;
- lcdc_info.ch[0].lcd_cfg.left_margin = 72;
- lcdc_info.ch[0].lcd_cfg.right_margin = 600;
- lcdc_info.ch[0].lcd_cfg.hsync_len = 16;
- lcdc_info.ch[0].lcd_cfg.upper_margin = 8;
- lcdc_info.ch[0].lcd_cfg.lower_margin = 8;
- lcdc_info.ch[0].lcd_cfg.vsync_len = 2;
- lcdc_info.ch[0].lcd_cfg.sync = FB_SYNC_VERT_HIGH_ACT |
- FB_SYNC_HOR_HIGH_ACT;
lcdc_info.ch[0].lcd_size_cfg.width = 44;
lcdc_info.ch[0].lcd_size_cfg.height = 79;
@@ -1041,8 +1136,10 @@ static void __init ap4evb_init(void)
#else
/*
- * WVGA
+ * For WVGA Panel (18-bit RGB, CONFIG_AP4EVB_WVGA=y) and
+ * IRQ7 for Touch Panel, set dip switches S3, S43 to ON, OFF.
*/
+
gpio_request(GPIO_FN_LCDD17, NULL);
gpio_request(GPIO_FN_LCDD16, NULL);
gpio_request(GPIO_FN_LCDD15, NULL);
@@ -1074,16 +1171,6 @@ static void __init ap4evb_init(void)
lcdc_info.ch[0].interface_type = RGB18;
lcdc_info.ch[0].clock_divider = 2;
lcdc_info.ch[0].flags = 0;
- lcdc_info.ch[0].lcd_cfg.name = "WVGA Panel";
- lcdc_info.ch[0].lcd_cfg.xres = 800;
- lcdc_info.ch[0].lcd_cfg.yres = 480;
- lcdc_info.ch[0].lcd_cfg.left_margin = 220;
- lcdc_info.ch[0].lcd_cfg.right_margin = 110;
- lcdc_info.ch[0].lcd_cfg.hsync_len = 70;
- lcdc_info.ch[0].lcd_cfg.upper_margin = 20;
- lcdc_info.ch[0].lcd_cfg.lower_margin = 5;
- lcdc_info.ch[0].lcd_cfg.vsync_len = 5;
- lcdc_info.ch[0].lcd_cfg.sync = 0;
lcdc_info.ch[0].lcd_size_cfg.width = 152;
lcdc_info.ch[0].lcd_size_cfg.height = 91;
@@ -1094,6 +1181,23 @@ static void __init ap4evb_init(void)
i2c_register_board_info(0, &tsc_device, 1);
#endif /* CONFIG_AP4EVB_QHD */
+ /* CEU */
+
+ /*
+ * TODO: reserve memory for V4L2 DMA buffers, when a suitable API
+ * becomes available
+ */
+
+ /* MIPI-CSI stuff */
+ gpio_request(GPIO_FN_VIO_CKO, NULL);
+
+ clk = clk_get(NULL, "vck1_clk");
+ if (!IS_ERR(clk)) {
+ clk_set_rate(clk, clk_round_rate(clk, 13000000));
+ clk_enable(clk);
+ clk_put(clk);
+ }
+
sh7372_add_standard_devices();
/* HDMI */
@@ -1116,7 +1220,7 @@ static void __init ap4evb_timer_init(void)
shmobile_timer.init();
/* External clock source */
- clk_set_rate(&dv_clki_clk, 27000000);
+ clk_set_rate(&sh7372_dv_clki_clk, 27000000);
}
static struct sys_timer ap4evb_timer = {
diff --git a/arch/arm/mach-shmobile/clock-sh7367.c b/arch/arm/mach-shmobile/clock-sh7367.c
index b6454c9f2ab..9f78729098f 100644
--- a/arch/arm/mach-shmobile/clock-sh7367.c
+++ b/arch/arm/mach-shmobile/clock-sh7367.c
@@ -321,7 +321,7 @@ static struct clk_lookup lookups[] = {
CLKDEV_DEV_ID("sh-sci.3", &mstp_clks[SYMSTP001]), /* SCIFA3 */
CLKDEV_DEV_ID("sh-sci.4", &mstp_clks[SYMSTP000]), /* SCIFA4 */
CLKDEV_DEV_ID("sh_siu", &mstp_clks[SYMSTP231]), /* SIU */
- CLKDEV_CON_ID("cmt1", &mstp_clks[SYMSTP229]), /* CMT10 */
+ CLKDEV_DEV_ID("sh_cmt.10", &mstp_clks[SYMSTP229]), /* CMT10 */
CLKDEV_DEV_ID("sh_irda", &mstp_clks[SYMSTP225]), /* IRDA */
CLKDEV_DEV_ID("i2c-sh_mobile.1", &mstp_clks[SYMSTP223]), /* IIC1 */
CLKDEV_DEV_ID("r8a66597_hcd.0", &mstp_clks[SYMSTP222]), /* USBHS */
diff --git a/arch/arm/mach-shmobile/clock-sh7372.c b/arch/arm/mach-shmobile/clock-sh7372.c
index 759468992ad..8565aefa21f 100644
--- a/arch/arm/mach-shmobile/clock-sh7372.c
+++ b/arch/arm/mach-shmobile/clock-sh7372.c
@@ -51,7 +51,7 @@
#define SMSTPCR4 0xe6150140
/* Platforms must set frequency on their DV_CLKI pin */
-struct clk dv_clki_clk = {
+struct clk sh7372_dv_clki_clk = {
};
/* Fixed 32 KHz root clock from EXTALR pin */
@@ -86,9 +86,9 @@ static struct clk_ops div2_clk_ops = {
};
/* Divide dv_clki by two */
-struct clk dv_clki_div2_clk = {
+struct clk sh7372_dv_clki_div2_clk = {
.ops = &div2_clk_ops,
- .parent = &dv_clki_clk,
+ .parent = &sh7372_dv_clki_clk,
};
/* Divide extal1 by two */
@@ -150,7 +150,7 @@ static struct clk pllc1_div2_clk = {
static struct clk *pllc2_parent[] = {
[0] = &extal1_div2_clk,
[1] = &extal2_div2_clk,
- [2] = &dv_clki_div2_clk,
+ [2] = &sh7372_dv_clki_div2_clk,
};
/* Only multipliers 20 * 2 to 46 * 2 are valid, last entry for CPUFREQ_TABLE_END */
@@ -284,7 +284,7 @@ static struct clk_ops pllc2_clk_ops = {
.set_parent = pllc2_set_parent,
};
-struct clk pllc2_clk = {
+struct clk sh7372_pllc2_clk = {
.ops = &pllc2_clk_ops,
.parent = &extal1_div2_clk,
.freq_table = pllc2_freq_table,
@@ -292,19 +292,28 @@ struct clk pllc2_clk = {
.parent_num = ARRAY_SIZE(pllc2_parent),
};
+/* External input clock (pin name: FSIACK/FSIBCK ) */
+struct clk sh7372_fsiack_clk = {
+};
+
+struct clk sh7372_fsibck_clk = {
+};
+
static struct clk *main_clks[] = {
- &dv_clki_clk,
+ &sh7372_dv_clki_clk,
&r_clk,
&sh7372_extal1_clk,
&sh7372_extal2_clk,
- &dv_clki_div2_clk,
+ &sh7372_dv_clki_div2_clk,
&extal1_div2_clk,
&extal2_div2_clk,
&extal2_div4_clk,
&pllc0_clk,
&pllc1_clk,
&pllc1_div2_clk,
- &pllc2_clk,
+ &sh7372_pllc2_clk,
+ &sh7372_fsiack_clk,
+ &sh7372_fsibck_clk,
};
static void div4_kick(struct clk *clk)
@@ -357,7 +366,7 @@ static struct clk div4_clks[DIV4_NR] = {
};
enum { DIV6_VCK1, DIV6_VCK2, DIV6_VCK3, DIV6_FMSI, DIV6_FMSO,
- DIV6_FSIA, DIV6_FSIB, DIV6_SUB, DIV6_SPU,
+ DIV6_SUB, DIV6_SPU,
DIV6_VOU, DIV6_DSIT, DIV6_DSI0P, DIV6_DSI1P,
DIV6_NR };
@@ -367,8 +376,6 @@ static struct clk div6_clks[DIV6_NR] = {
[DIV6_VCK3] = SH_CLK_DIV6(&pllc1_div2_clk, VCLKCR3, 0),
[DIV6_FMSI] = SH_CLK_DIV6(&pllc1_div2_clk, FMSICKCR, 0),
[DIV6_FMSO] = SH_CLK_DIV6(&pllc1_div2_clk, FMSOCKCR, 0),
- [DIV6_FSIA] = SH_CLK_DIV6(&pllc1_div2_clk, FSIACKCR, 0),
- [DIV6_FSIB] = SH_CLK_DIV6(&pllc1_div2_clk, FSIBCKCR, 0),
[DIV6_SUB] = SH_CLK_DIV6(&sh7372_extal2_clk, SUBCKCR, 0),
[DIV6_SPU] = SH_CLK_DIV6(&pllc1_div2_clk, SPUCKCR, 0),
[DIV6_VOU] = SH_CLK_DIV6(&pllc1_div2_clk, VOUCKCR, 0),
@@ -377,24 +384,42 @@ static struct clk div6_clks[DIV6_NR] = {
[DIV6_DSI1P] = SH_CLK_DIV6(&pllc1_div2_clk, DSI1PCKCR, 0),
};
-enum { DIV6_HDMI, DIV6_REPARENT_NR };
+enum { DIV6_HDMI, DIV6_FSIA, DIV6_FSIB, DIV6_REPARENT_NR };
/* Indices are important - they are the actual src selecting values */
static struct clk *hdmi_parent[] = {
[0] = &pllc1_div2_clk,
- [1] = &pllc2_clk,
- [2] = &dv_clki_clk,
+ [1] = &sh7372_pllc2_clk,
+ [2] = &sh7372_dv_clki_clk,
[3] = NULL, /* pllc2_div4 not implemented yet */
};
+static struct clk *fsiackcr_parent[] = {
+ [0] = &pllc1_div2_clk,
+ [1] = &sh7372_pllc2_clk,
+ [2] = &sh7372_fsiack_clk, /* external input for FSI A */
+ [3] = NULL, /* setting prohibited */
+};
+
+static struct clk *fsibckcr_parent[] = {
+ [0] = &pllc1_div2_clk,
+ [1] = &sh7372_pllc2_clk,
+ [2] = &sh7372_fsibck_clk, /* external input for FSI B */
+ [3] = NULL, /* setting prohibited */
+};
+
static struct clk div6_reparent_clks[DIV6_REPARENT_NR] = {
[DIV6_HDMI] = SH_CLK_DIV6_EXT(&pllc1_div2_clk, HDMICKCR, 0,
hdmi_parent, ARRAY_SIZE(hdmi_parent), 6, 2),
+ [DIV6_FSIA] = SH_CLK_DIV6_EXT(&pllc1_div2_clk, FSIACKCR, 0,
+ fsiackcr_parent, ARRAY_SIZE(fsiackcr_parent), 6, 2),
+ [DIV6_FSIB] = SH_CLK_DIV6_EXT(&pllc1_div2_clk, FSIBCKCR, 0,
+ fsibckcr_parent, ARRAY_SIZE(fsibckcr_parent), 6, 2),
};
enum { MSTP001,
MSTP131, MSTP130,
- MSTP129, MSTP128, MSTP127, MSTP126,
+ MSTP129, MSTP128, MSTP127, MSTP126, MSTP125,
MSTP118, MSTP117, MSTP116,
MSTP106, MSTP101, MSTP100,
MSTP223,
@@ -414,6 +439,7 @@ static struct clk mstp_clks[MSTP_NR] = {
[MSTP128] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 28, 0), /* VEU0 */
[MSTP127] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 27, 0), /* CEU */
[MSTP126] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 26, 0), /* CSI2 */
+ [MSTP125] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR1, 25, 0), /* TMU0 */
[MSTP118] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 18, 0), /* DSITX */
[MSTP117] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 17, 0), /* LCDC1 */
[MSTP116] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR1, 16, 0), /* IIC0 */
@@ -429,7 +455,7 @@ static struct clk mstp_clks[MSTP_NR] = {
[MSTP201] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 1, 0), /* SCIFA3 */
[MSTP200] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 0, 0), /* SCIFA4 */
[MSTP329] = MSTP(&r_clk, SMSTPCR3, 29, 0), /* CMT10 */
- [MSTP328] = MSTP(&div6_clks[DIV6_SPU], SMSTPCR3, 28, 0), /* FSIA */
+ [MSTP328] = MSTP(&div6_clks[DIV6_SPU], SMSTPCR3, 28, 0), /* FSI2 */
[MSTP323] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR3, 23, 0), /* IIC1 */
[MSTP322] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR3, 22, 0), /* USB0 */
[MSTP314] = MSTP(&div4_clks[DIV4_HP], SMSTPCR3, 14, 0), /* SDHI0 */
@@ -445,10 +471,11 @@ static struct clk mstp_clks[MSTP_NR] = {
#define CLKDEV_CON_ID(_id, _clk) { .con_id = _id, .clk = _clk }
#define CLKDEV_DEV_ID(_id, _clk) { .dev_id = _id, .clk = _clk }
+#define CLKDEV_ICK_ID(_cid, _did, _clk) { .con_id = _cid, .dev_id = _did, .clk = _clk }
static struct clk_lookup lookups[] = {
/* main clocks */
- CLKDEV_CON_ID("dv_clki_div2_clk", &dv_clki_div2_clk),
+ CLKDEV_CON_ID("dv_clki_div2_clk", &sh7372_dv_clki_div2_clk),
CLKDEV_CON_ID("r_clk", &r_clk),
CLKDEV_CON_ID("extal1", &sh7372_extal1_clk),
CLKDEV_CON_ID("extal2", &sh7372_extal2_clk),
@@ -458,7 +485,7 @@ static struct clk_lookup lookups[] = {
CLKDEV_CON_ID("pllc0_clk", &pllc0_clk),
CLKDEV_CON_ID("pllc1_clk", &pllc1_clk),
CLKDEV_CON_ID("pllc1_div2_clk", &pllc1_div2_clk),
- CLKDEV_CON_ID("pllc2_clk", &pllc2_clk),
+ CLKDEV_CON_ID("pllc2_clk", &sh7372_pllc2_clk),
/* DIV4 clocks */
CLKDEV_CON_ID("i_clk", &div4_clks[DIV4_I]),
@@ -483,8 +510,8 @@ static struct clk_lookup lookups[] = {
CLKDEV_CON_ID("vck3_clk", &div6_clks[DIV6_VCK3]),
CLKDEV_CON_ID("fmsi_clk", &div6_clks[DIV6_FMSI]),
CLKDEV_CON_ID("fmso_clk", &div6_clks[DIV6_FMSO]),
- CLKDEV_CON_ID("fsia_clk", &div6_clks[DIV6_FSIA]),
- CLKDEV_CON_ID("fsib_clk", &div6_clks[DIV6_FSIB]),
+ CLKDEV_CON_ID("fsia_clk", &div6_reparent_clks[DIV6_FSIA]),
+ CLKDEV_CON_ID("fsib_clk", &div6_reparent_clks[DIV6_FSIB]),
CLKDEV_CON_ID("sub_clk", &div6_clks[DIV6_SUB]),
CLKDEV_CON_ID("spu_clk", &div6_clks[DIV6_SPU]),
CLKDEV_CON_ID("vou_clk", &div6_clks[DIV6_VOU]),
@@ -501,6 +528,8 @@ static struct clk_lookup lookups[] = {
CLKDEV_DEV_ID("uio_pdrv_genirq.1", &mstp_clks[MSTP128]), /* VEU0 */
CLKDEV_DEV_ID("sh_mobile_ceu.0", &mstp_clks[MSTP127]), /* CEU */
CLKDEV_DEV_ID("sh-mobile-csi2.0", &mstp_clks[MSTP126]), /* CSI2 */
+ CLKDEV_DEV_ID("sh_tmu.0", &mstp_clks[MSTP125]), /* TMU00 */
+ CLKDEV_DEV_ID("sh_tmu.1", &mstp_clks[MSTP125]), /* TMU01 */
CLKDEV_DEV_ID("sh-mipi-dsi.0", &mstp_clks[MSTP118]), /* DSITX */
CLKDEV_DEV_ID("sh_mobile_lcdc_fb.1", &mstp_clks[MSTP117]), /* LCDC1 */
CLKDEV_DEV_ID("i2c-sh_mobile.0", &mstp_clks[MSTP116]), /* IIC0 */
@@ -516,7 +545,7 @@ static struct clk_lookup lookups[] = {
CLKDEV_DEV_ID("sh-sci.2", &mstp_clks[MSTP202]), /* SCIFA2 */
CLKDEV_DEV_ID("sh-sci.3", &mstp_clks[MSTP201]), /* SCIFA3 */
CLKDEV_DEV_ID("sh-sci.4", &mstp_clks[MSTP200]), /* SCIFA4 */
- CLKDEV_CON_ID("cmt1", &mstp_clks[MSTP329]), /* CMT10 */
+ CLKDEV_DEV_ID("sh_cmt.10", &mstp_clks[MSTP329]), /* CMT10 */
CLKDEV_DEV_ID("sh_fsi2", &mstp_clks[MSTP328]), /* FSI2 */
CLKDEV_DEV_ID("i2c-sh_mobile.1", &mstp_clks[MSTP323]), /* IIC1 */
CLKDEV_DEV_ID("r8a66597_hcd.0", &mstp_clks[MSTP323]), /* USB0 */
@@ -531,7 +560,10 @@ static struct clk_lookup lookups[] = {
CLKDEV_DEV_ID("r8a66597_hcd.1", &mstp_clks[MSTP406]), /* USB1 */
CLKDEV_DEV_ID("r8a66597_udc.1", &mstp_clks[MSTP406]), /* USB1 */
CLKDEV_DEV_ID("sh_keysc.0", &mstp_clks[MSTP403]), /* KEYSC */
- {.con_id = "ick", .dev_id = "sh-mobile-hdmi", .clk = &div6_reparent_clks[DIV6_HDMI]},
+
+ CLKDEV_ICK_ID("ick", "sh-mobile-hdmi", &div6_reparent_clks[DIV6_HDMI]),
+ CLKDEV_ICK_ID("icka", "sh_fsi2", &div6_reparent_clks[DIV6_FSIA]),
+ CLKDEV_ICK_ID("ickb", "sh_fsi2", &div6_reparent_clks[DIV6_FSIB]),
};
void __init sh7372_clock_init(void)
@@ -548,7 +580,7 @@ void __init sh7372_clock_init(void)
ret = sh_clk_div6_register(div6_clks, DIV6_NR);
if (!ret)
- ret = sh_clk_div6_reparent_register(div6_reparent_clks, DIV6_NR);
+ ret = sh_clk_div6_reparent_register(div6_reparent_clks, DIV6_REPARENT_NR);
if (!ret)
ret = sh_clk_mstp32_register(mstp_clks, MSTP_NR);
diff --git a/arch/arm/mach-shmobile/clock-sh7377.c b/arch/arm/mach-shmobile/clock-sh7377.c
index e007c28cf0a..f91395aeb9a 100644
--- a/arch/arm/mach-shmobile/clock-sh7377.c
+++ b/arch/arm/mach-shmobile/clock-sh7377.c
@@ -333,7 +333,7 @@ static struct clk_lookup lookups[] = {
CLKDEV_DEV_ID("sh-sci.3", &mstp_clks[MSTP201]), /* SCIFA3 */
CLKDEV_DEV_ID("sh-sci.4", &mstp_clks[MSTP200]), /* SCIFA4 */
CLKDEV_DEV_ID("sh-sci.6", &mstp_clks[MSTP331]), /* SCIFA6 */
- CLKDEV_CON_ID("cmt1", &mstp_clks[MSTP329]), /* CMT10 */
+ CLKDEV_DEV_ID("sh_cmt.10", &mstp_clks[MSTP329]), /* CMT10 */
CLKDEV_DEV_ID("sh_irda", &mstp_clks[MSTP325]), /* IRDA */
CLKDEV_DEV_ID("i2c-sh_mobile.1", &mstp_clks[MSTP323]), /* IIC1 */
CLKDEV_DEV_ID("r8a66597_hcd.0", &mstp_clks[MSTP322]), /* USBHS */
diff --git a/arch/arm/mach-shmobile/include/mach/sh7372.h b/arch/arm/mach-shmobile/include/mach/sh7372.h
index 33e9700ded7..147775a94bc 100644
--- a/arch/arm/mach-shmobile/include/mach/sh7372.h
+++ b/arch/arm/mach-shmobile/include/mach/sh7372.h
@@ -457,8 +457,12 @@ enum {
SHDMA_SLAVE_SDHI2_TX,
};
-extern struct clk dv_clki_clk;
-extern struct clk dv_clki_div2_clk;
-extern struct clk pllc2_clk;
+extern struct clk sh7372_extal1_clk;
+extern struct clk sh7372_extal2_clk;
+extern struct clk sh7372_dv_clki_clk;
+extern struct clk sh7372_dv_clki_div2_clk;
+extern struct clk sh7372_pllc2_clk;
+extern struct clk sh7372_fsiack_clk;
+extern struct clk sh7372_fsibck_clk;
#endif /* __ASM_SH7372_H__ */
diff --git a/arch/arm/mach-shmobile/intc-sh7372.c b/arch/arm/mach-shmobile/intc-sh7372.c
index e3551b56cd0..4cd3cae38e7 100644
--- a/arch/arm/mach-shmobile/intc-sh7372.c
+++ b/arch/arm/mach-shmobile/intc-sh7372.c
@@ -369,9 +369,13 @@ enum {
INTCS,
/* interrupt sources INTCS */
+
+ /* IRQ0S - IRQ31S */
VEU_VEU0, VEU_VEU1, VEU_VEU2, VEU_VEU3,
RTDMAC_1_DEI0, RTDMAC_1_DEI1, RTDMAC_1_DEI2, RTDMAC_1_DEI3,
CEU, BEU_BEU0, BEU_BEU1, BEU_BEU2,
+ /* MFI */
+ /* BBIF2 */
VPU,
TSIF1,
_3DG_SGX530,
@@ -379,13 +383,17 @@ enum {
IIC2_ALI2, IIC2_TACKI2, IIC2_WAITI2, IIC2_DTEI2,
IPMMU_IPMMUR, IPMMU_IPMMUR2,
RTDMAC_2_DEI4, RTDMAC_2_DEI5, RTDMAC_2_DADERR,
+ /* KEYSC */
+ /* TTI20 */
MSIOF,
IIC0_ALI0, IIC0_TACKI0, IIC0_WAITI0, IIC0_DTEI0,
TMU_TUNI0, TMU_TUNI1, TMU_TUNI2,
CMT0,
TSIF0,
+ /* CMT2 */
LMB,
CTI,
+ /* RWDT0 */
ICB,
JPU_JPEG,
LCDC,
@@ -397,11 +405,17 @@ enum {
CSIRX,
DSITX_DSITX0,
DSITX_DSITX1,
+ /* SPU2 */
+ /* FSI */
+ /* FMSI */
+ /* HDMI */
TMU1_TUNI0, TMU1_TUNI1, TMU1_TUNI2,
CMT4,
DSITX1_DSITX1_0,
DSITX1_DSITX1_1,
+ /* MFIS2 */
CPORTS2R,
+ /* CEC */
JPU6E,
/* interrupt groups INTCS */
@@ -410,12 +424,15 @@ enum {
};
static struct intc_vect intcs_vectors[] = {
+ /* IRQ0S - IRQ31S */
INTCS_VECT(VEU_VEU0, 0x700), INTCS_VECT(VEU_VEU1, 0x720),
INTCS_VECT(VEU_VEU2, 0x740), INTCS_VECT(VEU_VEU3, 0x760),
INTCS_VECT(RTDMAC_1_DEI0, 0x800), INTCS_VECT(RTDMAC_1_DEI1, 0x820),
INTCS_VECT(RTDMAC_1_DEI2, 0x840), INTCS_VECT(RTDMAC_1_DEI3, 0x860),
INTCS_VECT(CEU, 0x880), INTCS_VECT(BEU_BEU0, 0x8a0),
INTCS_VECT(BEU_BEU1, 0x8c0), INTCS_VECT(BEU_BEU2, 0x8e0),
+ /* MFI */
+ /* BBIF2 */
INTCS_VECT(VPU, 0x980),
INTCS_VECT(TSIF1, 0x9a0),
INTCS_VECT(_3DG_SGX530, 0x9e0),
@@ -425,14 +442,19 @@ static struct intc_vect intcs_vectors[] = {
INTCS_VECT(IPMMU_IPMMUR, 0xb00), INTCS_VECT(IPMMU_IPMMUR2, 0xb20),
INTCS_VECT(RTDMAC_2_DEI4, 0xb80), INTCS_VECT(RTDMAC_2_DEI5, 0xba0),
INTCS_VECT(RTDMAC_2_DADERR, 0xbc0),
+ /* KEYSC */
+ /* TTI20 */
+ INTCS_VECT(MSIOF, 0x0d20),
INTCS_VECT(IIC0_ALI0, 0xe00), INTCS_VECT(IIC0_TACKI0, 0xe20),
INTCS_VECT(IIC0_WAITI0, 0xe40), INTCS_VECT(IIC0_DTEI0, 0xe60),
INTCS_VECT(TMU_TUNI0, 0xe80), INTCS_VECT(TMU_TUNI1, 0xea0),
INTCS_VECT(TMU_TUNI2, 0xec0),
INTCS_VECT(CMT0, 0xf00),
INTCS_VECT(TSIF0, 0xf20),
+ /* CMT2 */
INTCS_VECT(LMB, 0xf60),
INTCS_VECT(CTI, 0x400),
+ /* RWDT0 */
INTCS_VECT(ICB, 0x480),
INTCS_VECT(JPU_JPEG, 0x560),
INTCS_VECT(LCDC, 0x580),
@@ -446,12 +468,18 @@ static struct intc_vect intcs_vectors[] = {
INTCS_VECT(CSIRX, 0x17a0),
INTCS_VECT(DSITX_DSITX0, 0x17c0),
INTCS_VECT(DSITX_DSITX1, 0x17e0),
+ /* SPU2 */
+ /* FSI */
+ /* FMSI */
+ /* HDMI */
INTCS_VECT(TMU1_TUNI0, 0x1900), INTCS_VECT(TMU1_TUNI1, 0x1920),
INTCS_VECT(TMU1_TUNI2, 0x1940),
INTCS_VECT(CMT4, 0x1980),
INTCS_VECT(DSITX1_DSITX1_0, 0x19a0),
INTCS_VECT(DSITX1_DSITX1_1, 0x19c0),
+ /* MFIS2 */
INTCS_VECT(CPORTS2R, 0x1a20),
+ /* CEC */
INTCS_VECT(JPU6E, 0x1a80),
INTC_VECT(INTCS, 0xf80),
diff --git a/arch/arm/mach-shmobile/pfc-sh7372.c b/arch/arm/mach-shmobile/pfc-sh7372.c
index ec420353f8e..9c265dae138 100644
--- a/arch/arm/mach-shmobile/pfc-sh7372.c
+++ b/arch/arm/mach-shmobile/pfc-sh7372.c
@@ -166,12 +166,12 @@ enum {
MSIOF2_TSYNC_MARK, MSIOF2_TSCK_MARK, MSIOF2_RXD_MARK,
MSIOF2_TXD_MARK,
- /* MSIOF3 */
+ /* BBIF1 */
BBIF1_RXD_MARK, BBIF1_TSYNC_MARK, BBIF1_TSCK_MARK,
BBIF1_TXD_MARK, BBIF1_RSCK_MARK, BBIF1_RSYNC_MARK,
BBIF1_FLOW_MARK, BB_RX_FLOW_N_MARK,
- /* MSIOF4 */
+ /* BBIF2 */
BBIF2_TSCK1_MARK, BBIF2_TSYNC1_MARK,
BBIF2_TXD1_MARK, BBIF2_RXD_MARK,
@@ -976,12 +976,12 @@ static struct pinmux_gpio pinmux_gpios[] = {
GPIO_FN(MSIOF2_TSYNC), GPIO_FN(MSIOF2_TSCK), GPIO_FN(MSIOF2_RXD),
GPIO_FN(MSIOF2_TXD),
- /* MSIOF3 */
+ /* BBIF1 */
GPIO_FN(BBIF1_RXD), GPIO_FN(BBIF1_TSYNC), GPIO_FN(BBIF1_TSCK),
GPIO_FN(BBIF1_TXD), GPIO_FN(BBIF1_RSCK), GPIO_FN(BBIF1_RSYNC),
GPIO_FN(BBIF1_FLOW), GPIO_FN(BB_RX_FLOW_N),
- /* MSIOF4 */
+ /* BBIF2 */
GPIO_FN(BBIF2_TSCK1), GPIO_FN(BBIF2_TSYNC1),
GPIO_FN(BBIF2_TXD1), GPIO_FN(BBIF2_RXD),
diff --git a/arch/arm/mach-shmobile/setup-sh7367.c b/arch/arm/mach-shmobile/setup-sh7367.c
index 3148c11a550..003008c1836 100644
--- a/arch/arm/mach-shmobile/setup-sh7367.c
+++ b/arch/arm/mach-shmobile/setup-sh7367.c
@@ -154,7 +154,6 @@ static struct sh_timer_config cmt10_platform_data = {
.name = "CMT10",
.channel_offset = 0x10,
.timer_bit = 0,
- .clk = "r_clk",
.clockevent_rating = 125,
.clocksource_rating = 125,
};
diff --git a/arch/arm/mach-shmobile/setup-sh7372.c b/arch/arm/mach-shmobile/setup-sh7372.c
index e26686c9d0b..564a6d0be47 100644
--- a/arch/arm/mach-shmobile/setup-sh7372.c
+++ b/arch/arm/mach-shmobile/setup-sh7372.c
@@ -158,7 +158,6 @@ static struct sh_timer_config cmt10_platform_data = {
.name = "CMT10",
.channel_offset = 0x10,
.timer_bit = 0,
- .clk = "cmt1",
.clockevent_rating = 125,
.clocksource_rating = 125,
};
@@ -186,6 +185,67 @@ static struct platform_device cmt10_device = {
.num_resources = ARRAY_SIZE(cmt10_resources),
};
+/* TMU */
+static struct sh_timer_config tmu00_platform_data = {
+ .name = "TMU00",
+ .channel_offset = 0x4,
+ .timer_bit = 0,
+ .clockevent_rating = 200,
+};
+
+static struct resource tmu00_resources[] = {
+ [0] = {
+ .name = "TMU00",
+ .start = 0xfff60008,
+ .end = 0xfff60013,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = intcs_evt2irq(0xe80), /* TMU_TUNI0 */
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device tmu00_device = {
+ .name = "sh_tmu",
+ .id = 0,
+ .dev = {
+ .platform_data = &tmu00_platform_data,
+ },
+ .resource = tmu00_resources,
+ .num_resources = ARRAY_SIZE(tmu00_resources),
+};
+
+static struct sh_timer_config tmu01_platform_data = {
+ .name = "TMU01",
+ .channel_offset = 0x10,
+ .timer_bit = 1,
+ .clocksource_rating = 200,
+};
+
+static struct resource tmu01_resources[] = {
+ [0] = {
+ .name = "TMU01",
+ .start = 0xfff60014,
+ .end = 0xfff6001f,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = intcs_evt2irq(0xea0), /* TMU_TUNI1 */
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device tmu01_device = {
+ .name = "sh_tmu",
+ .id = 1,
+ .dev = {
+ .platform_data = &tmu01_platform_data,
+ },
+ .resource = tmu01_resources,
+ .num_resources = ARRAY_SIZE(tmu01_resources),
+};
+
/* I2C */
static struct resource iic0_resources[] = {
[0] = {
@@ -419,14 +479,14 @@ static struct resource sh7372_dmae0_resources[] = {
},
{
/* DMA error IRQ */
- .start = 246,
- .end = 246,
+ .start = evt2irq(0x20c0),
+ .end = evt2irq(0x20c0),
.flags = IORESOURCE_IRQ,
},
{
/* IRQ for channels 0-5 */
- .start = 240,
- .end = 245,
+ .start = evt2irq(0x2000),
+ .end = evt2irq(0x20a0),
.flags = IORESOURCE_IRQ,
},
};
@@ -447,14 +507,14 @@ static struct resource sh7372_dmae1_resources[] = {
},
{
/* DMA error IRQ */
- .start = 254,
- .end = 254,
+ .start = evt2irq(0x21c0),
+ .end = evt2irq(0x21c0),
.flags = IORESOURCE_IRQ,
},
{
/* IRQ for channels 0-5 */
- .start = 248,
- .end = 253,
+ .start = evt2irq(0x2100),
+ .end = evt2irq(0x21a0),
.flags = IORESOURCE_IRQ,
},
};
@@ -475,14 +535,14 @@ static struct resource sh7372_dmae2_resources[] = {
},
{
/* DMA error IRQ */
- .start = 262,
- .end = 262,
+ .start = evt2irq(0x22c0),
+ .end = evt2irq(0x22c0),
.flags = IORESOURCE_IRQ,
},
{
/* IRQ for channels 0-5 */
- .start = 256,
- .end = 261,
+ .start = evt2irq(0x2200),
+ .end = evt2irq(0x22a0),
.flags = IORESOURCE_IRQ,
},
};
@@ -526,6 +586,11 @@ static struct platform_device *sh7372_early_devices[] __initdata = {
&scif5_device,
&scif6_device,
&cmt10_device,
+ &tmu00_device,
+ &tmu01_device,
+};
+
+static struct platform_device *sh7372_late_devices[] __initdata = {
&iic0_device,
&iic1_device,
&dma0_device,
@@ -537,6 +602,9 @@ void __init sh7372_add_standard_devices(void)
{
platform_add_devices(sh7372_early_devices,
ARRAY_SIZE(sh7372_early_devices));
+
+ platform_add_devices(sh7372_late_devices,
+ ARRAY_SIZE(sh7372_late_devices));
}
void __init sh7372_add_early_devices(void)
diff --git a/arch/arm/mach-shmobile/setup-sh7377.c b/arch/arm/mach-shmobile/setup-sh7377.c
index bb4adf17dbf..575dbd6c2f1 100644
--- a/arch/arm/mach-shmobile/setup-sh7377.c
+++ b/arch/arm/mach-shmobile/setup-sh7377.c
@@ -172,7 +172,6 @@ static struct sh_timer_config cmt10_platform_data = {
.name = "CMT10",
.channel_offset = 0x10,
.timer_bit = 0,
- .clk = "r_clk",
.clockevent_rating = 125,
.clocksource_rating = 125,
};
diff --git a/arch/arm/mach-u300/clock.c b/arch/arm/mach-u300/clock.c
index 60acf9e708a..7458fc6df5c 100644
--- a/arch/arm/mach-u300/clock.c
+++ b/arch/arm/mach-u300/clock.c
@@ -66,7 +66,7 @@ static DEFINE_SPINLOCK(syscon_resetreg_lock);
* AMBA bus
* |
* +- CPU
- * +- NANDIF NAND Flash interface
+ * +- FSMC NANDIF NAND Flash interface
* +- SEMI Shared Memory interface
* +- ISP Image Signal Processor (U335 only)
* +- CDS (U335 only)
@@ -726,7 +726,7 @@ static struct clk cpu_clk = {
};
static struct clk nandif_clk = {
- .name = "NANDIF",
+ .name = "FSMC",
.parent = &amba_clk,
.hw_ctrld = false,
.reset = true,
@@ -1259,7 +1259,7 @@ static struct clk_lookup lookups[] = {
/* Connected directly to the AMBA bus */
DEF_LOOKUP("amba", &amba_clk),
DEF_LOOKUP("cpu", &cpu_clk),
- DEF_LOOKUP("fsmc", &nandif_clk),
+ DEF_LOOKUP("fsmc-nand", &nandif_clk),
DEF_LOOKUP("semi", &semi_clk),
#ifdef CONFIG_MACH_U300_BS335
DEF_LOOKUP("isp", &isp_clk),
diff --git a/arch/arm/mach-u300/core.c b/arch/arm/mach-u300/core.c
index ea41c236be0..aa53ee22438 100644
--- a/arch/arm/mach-u300/core.c
+++ b/arch/arm/mach-u300/core.c
@@ -21,7 +21,8 @@
#include <linux/gpio.h>
#include <linux/clk.h>
#include <linux/err.h>
-#include <mach/coh901318.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/fsmc.h>
#include <asm/types.h>
#include <asm/setup.h>
@@ -30,6 +31,7 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
+#include <mach/coh901318.h>
#include <mach/hardware.h>
#include <mach/syscon.h>
#include <mach/dma_channels.h>
@@ -285,6 +287,13 @@ static struct resource rtc_resources[] = {
*/
static struct resource fsmc_resources[] = {
{
+ .name = "nand_data",
+ .start = U300_NAND_CS0_PHYS_BASE,
+ .end = U300_NAND_CS0_PHYS_BASE + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .name = "fsmc_regs",
.start = U300_NAND_IF_PHYS_BASE,
.end = U300_NAND_IF_PHYS_BASE + SZ_4K - 1,
.flags = IORESOURCE_MEM,
@@ -1429,11 +1438,39 @@ static struct platform_device rtc_device = {
.resource = rtc_resources,
};
-static struct platform_device fsmc_device = {
- .name = "nandif",
+static struct mtd_partition u300_partitions[] = {
+ {
+ .name = "bootrecords",
+ .offset = 0,
+ .size = SZ_128K,
+ },
+ {
+ .name = "free",
+ .offset = SZ_128K,
+ .size = 8064 * SZ_1K,
+ },
+ {
+ .name = "platform",
+ .offset = 8192 * SZ_1K,
+ .size = 253952 * SZ_1K,
+ },
+};
+
+static struct fsmc_nand_platform_data nand_platform_data = {
+ .partitions = u300_partitions,
+ .nr_partitions = ARRAY_SIZE(u300_partitions),
+ .options = NAND_SKIP_BBTSCAN,
+ .width = FSMC_NAND_BW8,
+};
+
+static struct platform_device nand_device = {
+ .name = "fsmc-nand",
.id = -1,
- .num_resources = ARRAY_SIZE(fsmc_resources),
.resource = fsmc_resources,
+ .num_resources = ARRAY_SIZE(fsmc_resources),
+ .dev = {
+ .platform_data = &nand_platform_data,
+ },
};
static struct platform_device ave_device = {
@@ -1465,7 +1502,7 @@ static struct platform_device *platform_devs[] __initdata = {
&keypad_device,
&rtc_device,
&gpio_device,
- &fsmc_device,
+ &nand_device,
&wdog_device,
&ave_device
};
diff --git a/arch/arm/mach-u300/include/mach/u300-regs.h b/arch/arm/mach-u300/include/mach/u300-regs.h
index 56721a0cd2a..8b85df4c8d8 100644
--- a/arch/arm/mach-u300/include/mach/u300-regs.h
+++ b/arch/arm/mach-u300/include/mach/u300-regs.h
@@ -20,11 +20,9 @@
/* NAND Flash CS0 */
#define U300_NAND_CS0_PHYS_BASE 0x80000000
-#define U300_NAND_CS0_VIRT_BASE 0xff040000
/* NFIF */
#define U300_NAND_IF_PHYS_BASE 0x9f800000
-#define U300_NAND_IF_VIRT_BASE 0xff030000
/* AHB Peripherals */
#define U300_AHB_PER_PHYS_BASE 0xa0000000
diff --git a/arch/arm/mach-ux500/cpu.c b/arch/arm/mach-ux500/cpu.c
index e0fd747e447..73fb1a551ec 100644
--- a/arch/arm/mach-ux500/cpu.c
+++ b/arch/arm/mach-ux500/cpu.c
@@ -10,6 +10,7 @@
#include <linux/io.h>
#include <linux/clk.h>
+#include <asm/cacheflush.h>
#include <asm/hardware/cache-l2x0.h>
#include <asm/hardware/gic.h>
#include <asm/mach/map.h>
@@ -71,6 +72,46 @@ void __init ux500_init_irq(void)
}
#ifdef CONFIG_CACHE_L2X0
+static inline void ux500_cache_wait(void __iomem *reg, unsigned long mask)
+{
+ /* wait for the operation to complete */
+ while (readl(reg) & mask)
+ ;
+}
+
+static inline void ux500_cache_sync(void)
+{
+ void __iomem *base = __io_address(UX500_L2CC_BASE);
+ writel(0, base + L2X0_CACHE_SYNC);
+ ux500_cache_wait(base + L2X0_CACHE_SYNC, 1);
+}
+
+/*
+ * The L2 cache cannot be turned off in the non-secure world.
+ * Dummy until a secure service is in place.
+ */
+static void ux500_l2x0_disable(void)
+{
+}
+
+/*
+ * This is only called when doing a kexec, just after turning off the L2
+ * and L1 cache, and it is surrounded by a spinlock in the generic version.
+ * However, we're not really turning off the L2 cache right now and the
+ * PL310 does not support exclusive accesses (used to implement the spinlock).
+ * So, the invalidation needs to be done without the spinlock.
+ */
+static void ux500_l2x0_inv_all(void)
+{
+ void __iomem *l2x0_base = __io_address(UX500_L2CC_BASE);
+ uint32_t l2x0_way_mask = (1<<16) - 1; /* Bitmask of active ways */
+
+ /* invalidate all ways */
+ writel(l2x0_way_mask, l2x0_base + L2X0_INV_WAY);
+ ux500_cache_wait(l2x0_base + L2X0_INV_WAY, l2x0_way_mask);
+ ux500_cache_sync();
+}
+
static int ux500_l2x0_init(void)
{
void __iomem *l2x0_base;
@@ -80,6 +121,10 @@ static int ux500_l2x0_init(void)
/* 64KB way size, 8 way associativity, force WA */
l2x0_init(l2x0_base, 0x3e060000, 0xc0000fff);
+ /* Override invalidate function */
+ outer_cache.disable = ux500_l2x0_disable;
+ outer_cache.inv_all = ux500_l2x0_inv_all;
+
return 0;
}
early_initcall(ux500_l2x0_init);
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index a0a2928ae4d..4414a01e1e8 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -779,6 +779,14 @@ config CACHE_L2X0
help
This option enables the L2x0 PrimeCell.
+config CACHE_PL310
+ bool
+ depends on CACHE_L2X0
+ default y if CPU_V7 && !CPU_V6
+ help
+ This option enables optimisations for the PL310 cache
+ controller.
+
config CACHE_TAUROS2
bool "Enable the Tauros2 L2 cache controller"
depends on (ARCH_DOVE || ARCH_MMP)
diff --git a/arch/arm/mm/cache-fa.S b/arch/arm/mm/cache-fa.S
index 7148e53e607..1fa6f71470d 100644
--- a/arch/arm/mm/cache-fa.S
+++ b/arch/arm/mm/cache-fa.S
@@ -38,6 +38,17 @@
#define CACHE_DLIMIT (CACHE_DSIZE * 2)
/*
+ * flush_icache_all()
+ *
+ * Unconditionally clean and invalidate the entire icache.
+ */
+ENTRY(fa_flush_icache_all)
+ mov r0, #0
+ mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache
+ mov pc, lr
+ENDPROC(fa_flush_icache_all)
+
+/*
* flush_user_cache_all()
*
* Clean and invalidate all cache entries in a particular address
@@ -233,6 +244,7 @@ ENDPROC(fa_dma_unmap_area)
.type fa_cache_fns, #object
ENTRY(fa_cache_fns)
+ .long fa_flush_icache_all
.long fa_flush_kern_cache_all
.long fa_flush_user_cache_all
.long fa_flush_user_cache_range
diff --git a/arch/arm/mm/cache-l2x0.c b/arch/arm/mm/cache-l2x0.c
index 9982eb385c0..170c9bb9586 100644
--- a/arch/arm/mm/cache-l2x0.c
+++ b/arch/arm/mm/cache-l2x0.c
@@ -28,14 +28,24 @@
static void __iomem *l2x0_base;
static DEFINE_SPINLOCK(l2x0_lock);
static uint32_t l2x0_way_mask; /* Bitmask of active ways */
+static uint32_t l2x0_size;
-static inline void cache_wait(void __iomem *reg, unsigned long mask)
+static inline void cache_wait_way(void __iomem *reg, unsigned long mask)
{
- /* wait for the operation to complete */
+ /* wait for cache operation by line or way to complete */
while (readl_relaxed(reg) & mask)
;
}
+#ifdef CONFIG_CACHE_PL310
+static inline void cache_wait(void __iomem *reg, unsigned long mask)
+{
+ /* cache operations by line are atomic on PL310 */
+}
+#else
+#define cache_wait cache_wait_way
+#endif
+
static inline void cache_sync(void)
{
void __iomem *base = l2x0_base;
@@ -103,14 +113,40 @@ static void l2x0_cache_sync(void)
spin_unlock_irqrestore(&l2x0_lock, flags);
}
-static inline void l2x0_inv_all(void)
+static void l2x0_flush_all(void)
+{
+ unsigned long flags;
+
+ /* clean all ways */
+ spin_lock_irqsave(&l2x0_lock, flags);
+ writel_relaxed(l2x0_way_mask, l2x0_base + L2X0_CLEAN_INV_WAY);
+ cache_wait_way(l2x0_base + L2X0_CLEAN_INV_WAY, l2x0_way_mask);
+ cache_sync();
+ spin_unlock_irqrestore(&l2x0_lock, flags);
+}
+
+static void l2x0_clean_all(void)
+{
+ unsigned long flags;
+
+ /* clean all ways */
+ spin_lock_irqsave(&l2x0_lock, flags);
+ writel_relaxed(l2x0_way_mask, l2x0_base + L2X0_CLEAN_WAY);
+ cache_wait_way(l2x0_base + L2X0_CLEAN_WAY, l2x0_way_mask);
+ cache_sync();
+ spin_unlock_irqrestore(&l2x0_lock, flags);
+}
+
+static void l2x0_inv_all(void)
{
unsigned long flags;
/* invalidate all ways */
spin_lock_irqsave(&l2x0_lock, flags);
+ /* Invalidating when L2 is enabled is a nono */
+ BUG_ON(readl(l2x0_base + L2X0_CTRL) & 1);
writel_relaxed(l2x0_way_mask, l2x0_base + L2X0_INV_WAY);
- cache_wait(l2x0_base + L2X0_INV_WAY, l2x0_way_mask);
+ cache_wait_way(l2x0_base + L2X0_INV_WAY, l2x0_way_mask);
cache_sync();
spin_unlock_irqrestore(&l2x0_lock, flags);
}
@@ -159,6 +195,11 @@ static void l2x0_clean_range(unsigned long start, unsigned long end)
void __iomem *base = l2x0_base;
unsigned long flags;
+ if ((end - start) >= l2x0_size) {
+ l2x0_clean_all();
+ return;
+ }
+
spin_lock_irqsave(&l2x0_lock, flags);
start &= ~(CACHE_LINE_SIZE - 1);
while (start < end) {
@@ -184,6 +225,11 @@ static void l2x0_flush_range(unsigned long start, unsigned long end)
void __iomem *base = l2x0_base;
unsigned long flags;
+ if ((end - start) >= l2x0_size) {
+ l2x0_flush_all();
+ return;
+ }
+
spin_lock_irqsave(&l2x0_lock, flags);
start &= ~(CACHE_LINE_SIZE - 1);
while (start < end) {
@@ -206,10 +252,20 @@ static void l2x0_flush_range(unsigned long start, unsigned long end)
spin_unlock_irqrestore(&l2x0_lock, flags);
}
+static void l2x0_disable(void)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&l2x0_lock, flags);
+ writel(0, l2x0_base + L2X0_CTRL);
+ spin_unlock_irqrestore(&l2x0_lock, flags);
+}
+
void __init l2x0_init(void __iomem *base, __u32 aux_val, __u32 aux_mask)
{
__u32 aux;
__u32 cache_id;
+ __u32 way_size = 0;
int ways;
const char *type;
@@ -244,6 +300,13 @@ void __init l2x0_init(void __iomem *base, __u32 aux_val, __u32 aux_mask)
l2x0_way_mask = (1 << ways) - 1;
/*
+ * L2 cache Size = Way size * Number of ways
+ */
+ way_size = (aux & L2X0_AUX_CTRL_WAY_SIZE_MASK) >> 17;
+ way_size = 1 << (way_size + 3);
+ l2x0_size = ways * way_size * SZ_1K;
+
+ /*
* Check if l2x0 controller is already enabled.
* If you are booting from non-secure mode
* accessing the below registers will fault.
@@ -263,8 +326,11 @@ void __init l2x0_init(void __iomem *base, __u32 aux_val, __u32 aux_mask)
outer_cache.clean_range = l2x0_clean_range;
outer_cache.flush_range = l2x0_flush_range;
outer_cache.sync = l2x0_cache_sync;
+ outer_cache.flush_all = l2x0_flush_all;
+ outer_cache.inv_all = l2x0_inv_all;
+ outer_cache.disable = l2x0_disable;
printk(KERN_INFO "%s cache controller enabled\n", type);
- printk(KERN_INFO "l2x0: %d ways, CACHE_ID 0x%08x, AUX_CTRL 0x%08x\n",
- ways, cache_id, aux);
+ printk(KERN_INFO "l2x0: %d ways, CACHE_ID 0x%08x, AUX_CTRL 0x%08x, Cache size: %d B\n",
+ ways, cache_id, aux, l2x0_size);
}
diff --git a/arch/arm/mm/cache-v3.S b/arch/arm/mm/cache-v3.S
index c2ff3c599fe..2e2bc406a18 100644
--- a/arch/arm/mm/cache-v3.S
+++ b/arch/arm/mm/cache-v3.S
@@ -13,6 +13,15 @@
#include "proc-macros.S"
/*
+ * flush_icache_all()
+ *
+ * Unconditionally clean and invalidate the entire icache.
+ */
+ENTRY(v3_flush_icache_all)
+ mov pc, lr
+ENDPROC(v3_flush_icache_all)
+
+/*
* flush_user_cache_all()
*
* Invalidate all cache entries in a particular address
@@ -122,6 +131,7 @@ ENDPROC(v3_dma_map_area)
.type v3_cache_fns, #object
ENTRY(v3_cache_fns)
+ .long v3_flush_icache_all
.long v3_flush_kern_cache_all
.long v3_flush_user_cache_all
.long v3_flush_user_cache_range
diff --git a/arch/arm/mm/cache-v4.S b/arch/arm/mm/cache-v4.S
index 4810f7e3e81..a8fefb523f1 100644
--- a/arch/arm/mm/cache-v4.S
+++ b/arch/arm/mm/cache-v4.S
@@ -13,6 +13,15 @@
#include "proc-macros.S"
/*
+ * flush_icache_all()
+ *
+ * Unconditionally clean and invalidate the entire icache.
+ */
+ENTRY(v4_flush_icache_all)
+ mov pc, lr
+ENDPROC(v4_flush_icache_all)
+
+/*
* flush_user_cache_all()
*
* Invalidate all cache entries in a particular address
@@ -134,6 +143,7 @@ ENDPROC(v4_dma_map_area)
.type v4_cache_fns, #object
ENTRY(v4_cache_fns)
+ .long v4_flush_icache_all
.long v4_flush_kern_cache_all
.long v4_flush_user_cache_all
.long v4_flush_user_cache_range
diff --git a/arch/arm/mm/cache-v4wb.S b/arch/arm/mm/cache-v4wb.S
index df8368afa10..d3644db467b 100644
--- a/arch/arm/mm/cache-v4wb.S
+++ b/arch/arm/mm/cache-v4wb.S
@@ -51,6 +51,17 @@ flush_base:
.text
/*
+ * flush_icache_all()
+ *
+ * Unconditionally clean and invalidate the entire icache.
+ */
+ENTRY(v4wb_flush_icache_all)
+ mov r0, #0
+ mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache
+ mov pc, lr
+ENDPROC(v4wb_flush_icache_all)
+
+/*
* flush_user_cache_all()
*
* Clean and invalidate all cache entries in a particular address
@@ -244,6 +255,7 @@ ENDPROC(v4wb_dma_unmap_area)
.type v4wb_cache_fns, #object
ENTRY(v4wb_cache_fns)
+ .long v4wb_flush_icache_all
.long v4wb_flush_kern_cache_all
.long v4wb_flush_user_cache_all
.long v4wb_flush_user_cache_range
diff --git a/arch/arm/mm/cache-v4wt.S b/arch/arm/mm/cache-v4wt.S
index 45c70312f43..49c2b66cf3d 100644
--- a/arch/arm/mm/cache-v4wt.S
+++ b/arch/arm/mm/cache-v4wt.S
@@ -41,6 +41,17 @@
#define CACHE_DLIMIT 16384
/*
+ * flush_icache_all()
+ *
+ * Unconditionally clean and invalidate the entire icache.
+ */
+ENTRY(v4wt_flush_icache_all)
+ mov r0, #0
+ mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache
+ mov pc, lr
+ENDPROC(v4wt_flush_icache_all)
+
+/*
* flush_user_cache_all()
*
* Invalidate all cache entries in a particular address
@@ -188,6 +199,7 @@ ENDPROC(v4wt_dma_map_area)
.type v4wt_cache_fns, #object
ENTRY(v4wt_cache_fns)
+ .long v4wt_flush_icache_all
.long v4wt_flush_kern_cache_all
.long v4wt_flush_user_cache_all
.long v4wt_flush_user_cache_range
diff --git a/arch/arm/mm/fault-armv.c b/arch/arm/mm/fault-armv.c
index c493d7244d3..83e59f87042 100644
--- a/arch/arm/mm/fault-armv.c
+++ b/arch/arm/mm/fault-armv.c
@@ -66,6 +66,30 @@ static int do_adjust_pte(struct vm_area_struct *vma, unsigned long address,
return ret;
}
+#if USE_SPLIT_PTLOCKS
+/*
+ * If we are using split PTE locks, then we need to take the page
+ * lock here. Otherwise we are using shared mm->page_table_lock
+ * which is already locked, thus cannot take it.
+ */
+static inline void do_pte_lock(spinlock_t *ptl)
+{
+ /*
+ * Use nested version here to indicate that we are already
+ * holding one similar spinlock.
+ */
+ spin_lock_nested(ptl, SINGLE_DEPTH_NESTING);
+}
+
+static inline void do_pte_unlock(spinlock_t *ptl)
+{
+ spin_unlock(ptl);
+}
+#else /* !USE_SPLIT_PTLOCKS */
+static inline void do_pte_lock(spinlock_t *ptl) {}
+static inline void do_pte_unlock(spinlock_t *ptl) {}
+#endif /* USE_SPLIT_PTLOCKS */
+
static int adjust_pte(struct vm_area_struct *vma, unsigned long address,
unsigned long pfn)
{
@@ -90,11 +114,11 @@ static int adjust_pte(struct vm_area_struct *vma, unsigned long address,
*/
ptl = pte_lockptr(vma->vm_mm, pmd);
pte = pte_offset_map(pmd, address);
- spin_lock(ptl);
+ do_pte_lock(ptl);
ret = do_adjust_pte(vma, address, pfn, pte);
- spin_unlock(ptl);
+ do_pte_unlock(ptl);
pte_unmap(pte);
return ret;
diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c
index 7fd9b5eb177..5164069ced4 100644
--- a/arch/arm/mm/init.c
+++ b/arch/arm/mm/init.c
@@ -18,6 +18,7 @@
#include <linux/highmem.h>
#include <linux/gfp.h>
#include <linux/memblock.h>
+#include <linux/sort.h>
#include <asm/mach-types.h>
#include <asm/sections.h>
@@ -121,9 +122,10 @@ void show_mem(void)
printk("%d pages swap cached\n", cached);
}
-static void __init find_limits(struct meminfo *mi,
- unsigned long *min, unsigned long *max_low, unsigned long *max_high)
+static void __init find_limits(unsigned long *min, unsigned long *max_low,
+ unsigned long *max_high)
{
+ struct meminfo *mi = &meminfo;
int i;
*min = -1UL;
@@ -147,14 +149,13 @@ static void __init find_limits(struct meminfo *mi,
}
}
-static void __init arm_bootmem_init(struct meminfo *mi,
- unsigned long start_pfn, unsigned long end_pfn)
+static void __init arm_bootmem_init(unsigned long start_pfn,
+ unsigned long end_pfn)
{
struct memblock_region *reg;
unsigned int boot_pages;
phys_addr_t bitmap;
pg_data_t *pgdat;
- int i;
/*
* Allocate the bootmem bitmap page. This must be in a region
@@ -172,30 +173,39 @@ static void __init arm_bootmem_init(struct meminfo *mi,
pgdat = NODE_DATA(0);
init_bootmem_node(pgdat, __phys_to_pfn(bitmap), start_pfn, end_pfn);
- for_each_bank(i, mi) {
- struct membank *bank = &mi->bank[i];
- if (!bank->highmem)
- free_bootmem(bank_phys_start(bank), bank_phys_size(bank));
+ /* Free the lowmem regions from memblock into bootmem. */
+ for_each_memblock(memory, reg) {
+ unsigned long start = memblock_region_memory_base_pfn(reg);
+ unsigned long end = memblock_region_memory_end_pfn(reg);
+
+ if (end >= end_pfn)
+ end = end_pfn;
+ if (start >= end)
+ break;
+
+ free_bootmem(__pfn_to_phys(start), (end - start) << PAGE_SHIFT);
}
- /*
- * Reserve the memblock reserved regions in bootmem.
- */
+ /* Reserve the lowmem memblock reserved regions in bootmem. */
for_each_memblock(reserved, reg) {
- phys_addr_t start = memblock_region_reserved_base_pfn(reg);
- phys_addr_t end = memblock_region_reserved_end_pfn(reg);
- if (start >= start_pfn && end <= end_pfn)
- reserve_bootmem_node(pgdat, __pfn_to_phys(start),
- (end - start) << PAGE_SHIFT,
- BOOTMEM_DEFAULT);
+ unsigned long start = memblock_region_reserved_base_pfn(reg);
+ unsigned long end = memblock_region_reserved_end_pfn(reg);
+
+ if (end >= end_pfn)
+ end = end_pfn;
+ if (start >= end)
+ break;
+
+ reserve_bootmem(__pfn_to_phys(start),
+ (end - start) << PAGE_SHIFT, BOOTMEM_DEFAULT);
}
}
-static void __init arm_bootmem_free(struct meminfo *mi, unsigned long min,
- unsigned long max_low, unsigned long max_high)
+static void __init arm_bootmem_free(unsigned long min, unsigned long max_low,
+ unsigned long max_high)
{
unsigned long zone_size[MAX_NR_ZONES], zhole_size[MAX_NR_ZONES];
- int i;
+ struct memblock_region *reg;
/*
* initialise the zones.
@@ -217,13 +227,20 @@ static void __init arm_bootmem_free(struct meminfo *mi, unsigned long min,
* holes = node_size - sum(bank_sizes)
*/
memcpy(zhole_size, zone_size, sizeof(zhole_size));
- for_each_bank(i, mi) {
- int idx = 0;
+ for_each_memblock(memory, reg) {
+ unsigned long start = memblock_region_memory_base_pfn(reg);
+ unsigned long end = memblock_region_memory_end_pfn(reg);
+
+ if (start < max_low) {
+ unsigned long low_end = min(end, max_low);
+ zhole_size[0] -= low_end - start;
+ }
#ifdef CONFIG_HIGHMEM
- if (mi->bank[i].highmem)
- idx = ZONE_HIGHMEM;
+ if (end > max_low) {
+ unsigned long high_start = max(start, max_low);
+ zhole_size[ZONE_HIGHMEM] -= end - high_start;
+ }
#endif
- zhole_size[idx] -= bank_pfn_size(&mi->bank[i]);
}
/*
@@ -256,10 +273,19 @@ static void arm_memory_present(void)
}
#endif
+static int __init meminfo_cmp(const void *_a, const void *_b)
+{
+ const struct membank *a = _a, *b = _b;
+ long cmp = bank_pfn_start(a) - bank_pfn_start(b);
+ return cmp < 0 ? -1 : cmp > 0 ? 1 : 0;
+}
+
void __init arm_memblock_init(struct meminfo *mi, struct machine_desc *mdesc)
{
int i;
+ sort(&meminfo.bank, meminfo.nr_banks, sizeof(meminfo.bank[0]), meminfo_cmp, NULL);
+
memblock_init();
for (i = 0; i < mi->nr_banks; i++)
memblock_add(mi->bank[i].start, mi->bank[i].size);
@@ -292,14 +318,13 @@ void __init arm_memblock_init(struct meminfo *mi, struct machine_desc *mdesc)
void __init bootmem_init(void)
{
- struct meminfo *mi = &meminfo;
unsigned long min, max_low, max_high;
max_low = max_high = 0;
- find_limits(mi, &min, &max_low, &max_high);
+ find_limits(&min, &max_low, &max_high);
- arm_bootmem_init(mi, min, max_low);
+ arm_bootmem_init(min, max_low);
/*
* Sparsemem tries to allocate bootmem in memory_present(),
@@ -317,7 +342,7 @@ void __init bootmem_init(void)
* the sparse mem_map arrays initialized by sparse_init()
* for memmap_init_zone(), otherwise all PFNs are invalid.
*/
- arm_bootmem_free(mi, min, max_low, max_high);
+ arm_bootmem_free(min, max_low, max_high);
high_memory = __va((max_low << PAGE_SHIFT) - 1) + 1;
@@ -411,6 +436,56 @@ static void __init free_unused_memmap(struct meminfo *mi)
}
}
+static void __init free_highpages(void)
+{
+#ifdef CONFIG_HIGHMEM
+ unsigned long max_low = max_low_pfn + PHYS_PFN_OFFSET;
+ struct memblock_region *mem, *res;
+
+ /* set highmem page free */
+ for_each_memblock(memory, mem) {
+ unsigned long start = memblock_region_memory_base_pfn(mem);
+ unsigned long end = memblock_region_memory_end_pfn(mem);
+
+ /* Ignore complete lowmem entries */
+ if (end <= max_low)
+ continue;
+
+ /* Truncate partial highmem entries */
+ if (start < max_low)
+ start = max_low;
+
+ /* Find and exclude any reserved regions */
+ for_each_memblock(reserved, res) {
+ unsigned long res_start, res_end;
+
+ res_start = memblock_region_reserved_base_pfn(res);
+ res_end = memblock_region_reserved_end_pfn(res);
+
+ if (res_end < start)
+ continue;
+ if (res_start < start)
+ res_start = start;
+ if (res_start > end)
+ res_start = end;
+ if (res_end > end)
+ res_end = end;
+ if (res_start != start)
+ totalhigh_pages += free_area(start, res_start,
+ NULL);
+ start = res_end;
+ if (start == end)
+ break;
+ }
+
+ /* And now free anything which remains */
+ if (start < end)
+ totalhigh_pages += free_area(start, end, NULL);
+ }
+ totalram_pages += totalhigh_pages;
+#endif
+}
+
/*
* mem_init() marks the free areas in the mem_map and tells us how much
* memory is free. This is done after various parts of the system have
@@ -419,6 +494,7 @@ static void __init free_unused_memmap(struct meminfo *mi)
void __init mem_init(void)
{
unsigned long reserved_pages, free_pages;
+ struct memblock_region *reg;
int i;
#ifdef CONFIG_HAVE_TCM
/* These pointers are filled in on TCM detection */
@@ -439,16 +515,7 @@ void __init mem_init(void)
__phys_to_pfn(__pa(swapper_pg_dir)), NULL);
#endif
-#ifdef CONFIG_HIGHMEM
- /* set highmem page free */
- for_each_bank (i, &meminfo) {
- unsigned long start = bank_pfn_start(&meminfo.bank[i]);
- unsigned long end = bank_pfn_end(&meminfo.bank[i]);
- if (start >= max_low_pfn + PHYS_PFN_OFFSET)
- totalhigh_pages += free_area(start, end, NULL);
- }
- totalram_pages += totalhigh_pages;
-#endif
+ free_highpages();
reserved_pages = free_pages = 0;
@@ -478,9 +545,11 @@ void __init mem_init(void)
*/
printk(KERN_INFO "Memory:");
num_physpages = 0;
- for (i = 0; i < meminfo.nr_banks; i++) {
- num_physpages += bank_pfn_size(&meminfo.bank[i]);
- printk(" %ldMB", bank_phys_size(&meminfo.bank[i]) >> 20);
+ for_each_memblock(memory, reg) {
+ unsigned long pages = memblock_region_memory_end_pfn(reg) -
+ memblock_region_memory_base_pfn(reg);
+ num_physpages += pages;
+ printk(" %ldMB", pages >> (20 - PAGE_SHIFT));
}
printk(" = %luMB total\n", num_physpages >> (20 - PAGE_SHIFT));
diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c
index c32f731d56d..72ad3e1f56c 100644
--- a/arch/arm/mm/mmu.c
+++ b/arch/arm/mm/mmu.c
@@ -14,7 +14,6 @@
#include <linux/mman.h>
#include <linux/nodemask.h>
#include <linux/memblock.h>
-#include <linux/sort.h>
#include <linux/fs.h>
#include <asm/cputype.h>
@@ -265,17 +264,17 @@ static struct mem_type mem_types[] = {
.domain = DOMAIN_KERNEL,
},
[MT_MEMORY_DTCM] = {
- .prot_pte = L_PTE_PRESENT | L_PTE_YOUNG |
- L_PTE_DIRTY | L_PTE_WRITE,
- .prot_l1 = PMD_TYPE_TABLE,
- .prot_sect = PMD_TYPE_SECT | PMD_SECT_XN,
- .domain = DOMAIN_KERNEL,
+ .prot_pte = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY |
+ L_PTE_WRITE,
+ .prot_l1 = PMD_TYPE_TABLE,
+ .prot_sect = PMD_TYPE_SECT | PMD_SECT_XN,
+ .domain = DOMAIN_KERNEL,
},
[MT_MEMORY_ITCM] = {
.prot_pte = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY |
- L_PTE_USER | L_PTE_EXEC,
+ L_PTE_WRITE | L_PTE_EXEC,
.prot_l1 = PMD_TYPE_TABLE,
- .domain = DOMAIN_IO,
+ .domain = DOMAIN_KERNEL,
},
};
@@ -745,13 +744,14 @@ static int __init early_vmalloc(char *arg)
}
early_param("vmalloc", early_vmalloc);
-phys_addr_t lowmem_end_addr;
+static phys_addr_t lowmem_limit __initdata = 0;
static void __init sanity_check_meminfo(void)
{
int i, j, highmem = 0;
- lowmem_end_addr = __pa(vmalloc_min - 1) + 1;
+ lowmem_limit = __pa(vmalloc_min - 1) + 1;
+ memblock_set_current_limit(lowmem_limit);
for (i = 0, j = 0; i < meminfo.nr_banks; i++) {
struct membank *bank = &meminfo.bank[j];
@@ -852,6 +852,7 @@ static void __init sanity_check_meminfo(void)
static inline void prepare_page_table(void)
{
unsigned long addr;
+ phys_addr_t end;
/*
* Clear out all the mappings below the kernel image.
@@ -867,10 +868,17 @@ static inline void prepare_page_table(void)
pmd_clear(pmd_off_k(addr));
/*
+ * Find the end of the first block of lowmem.
+ */
+ end = memblock.memory.regions[0].base + memblock.memory.regions[0].size;
+ if (end >= lowmem_limit)
+ end = lowmem_limit;
+
+ /*
* Clear out all the kernel space mappings, except for the first
* memory bank, up to the end of the vmalloc region.
*/
- for (addr = __phys_to_virt(bank_phys_end(&meminfo.bank[0]));
+ for (addr = __phys_to_virt(end);
addr < VMALLOC_END; addr += PGDIR_SIZE)
pmd_clear(pmd_off_k(addr));
}
@@ -987,37 +995,28 @@ static void __init kmap_init(void)
#endif
}
-static inline void map_memory_bank(struct membank *bank)
-{
- struct map_desc map;
-
- map.pfn = bank_pfn_start(bank);
- map.virtual = __phys_to_virt(bank_phys_start(bank));
- map.length = bank_phys_size(bank);
- map.type = MT_MEMORY;
-
- create_mapping(&map);
-}
-
static void __init map_lowmem(void)
{
- struct meminfo *mi = &meminfo;
- int i;
+ struct memblock_region *reg;
/* Map all the lowmem memory banks. */
- for (i = 0; i < mi->nr_banks; i++) {
- struct membank *bank = &mi->bank[i];
+ for_each_memblock(memory, reg) {
+ phys_addr_t start = reg->base;
+ phys_addr_t end = start + reg->size;
+ struct map_desc map;
+
+ if (end > lowmem_limit)
+ end = lowmem_limit;
+ if (start >= end)
+ break;
- if (!bank->highmem)
- map_memory_bank(bank);
- }
-}
+ map.pfn = __phys_to_pfn(start);
+ map.virtual = __phys_to_virt(start);
+ map.length = end - start;
+ map.type = MT_MEMORY;
-static int __init meminfo_cmp(const void *_a, const void *_b)
-{
- const struct membank *a = _a, *b = _b;
- long cmp = bank_pfn_start(a) - bank_pfn_start(b);
- return cmp < 0 ? -1 : cmp > 0 ? 1 : 0;
+ create_mapping(&map);
+ }
}
/*
@@ -1028,8 +1027,6 @@ void __init paging_init(struct machine_desc *mdesc)
{
void *zero_page;
- sort(&meminfo.bank, meminfo.nr_banks, sizeof(meminfo.bank[0]), meminfo_cmp, NULL);
-
build_mem_type_table();
sanity_check_meminfo();
prepare_page_table();
diff --git a/arch/arm/mm/proc-arm1020.S b/arch/arm/mm/proc-arm1020.S
index a6f5f8475b9..bcf748d9f4e 100644
--- a/arch/arm/mm/proc-arm1020.S
+++ b/arch/arm/mm/proc-arm1020.S
@@ -119,6 +119,20 @@ ENTRY(cpu_arm1020_do_idle)
/* ================================= CACHE ================================ */
.align 5
+
+/*
+ * flush_icache_all()
+ *
+ * Unconditionally clean and invalidate the entire icache.
+ */
+ENTRY(arm1020_flush_icache_all)
+#ifndef CONFIG_CPU_ICACHE_DISABLE
+ mov r0, #0
+ mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache
+#endif
+ mov pc, lr
+ENDPROC(arm1020_flush_icache_all)
+
/*
* flush_user_cache_all()
*
@@ -351,6 +365,7 @@ ENTRY(arm1020_dma_unmap_area)
ENDPROC(arm1020_dma_unmap_area)
ENTRY(arm1020_cache_fns)
+ .long arm1020_flush_icache_all
.long arm1020_flush_kern_cache_all
.long arm1020_flush_user_cache_all
.long arm1020_flush_user_cache_range
diff --git a/arch/arm/mm/proc-arm1020e.S b/arch/arm/mm/proc-arm1020e.S
index afc06b9c313..ab7ec26657e 100644
--- a/arch/arm/mm/proc-arm1020e.S
+++ b/arch/arm/mm/proc-arm1020e.S
@@ -119,6 +119,20 @@ ENTRY(cpu_arm1020e_do_idle)
/* ================================= CACHE ================================ */
.align 5
+
+/*
+ * flush_icache_all()
+ *
+ * Unconditionally clean and invalidate the entire icache.
+ */
+ENTRY(arm1020e_flush_icache_all)
+#ifndef CONFIG_CPU_ICACHE_DISABLE
+ mov r0, #0
+ mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache
+#endif
+ mov pc, lr
+ENDPROC(arm1020e_flush_icache_all)
+
/*
* flush_user_cache_all()
*
@@ -337,6 +351,7 @@ ENTRY(arm1020e_dma_unmap_area)
ENDPROC(arm1020e_dma_unmap_area)
ENTRY(arm1020e_cache_fns)
+ .long arm1020e_flush_icache_all
.long arm1020e_flush_kern_cache_all
.long arm1020e_flush_user_cache_all
.long arm1020e_flush_user_cache_range
diff --git a/arch/arm/mm/proc-arm1022.S b/arch/arm/mm/proc-arm1022.S
index 8915e0ba3fe..831c5e54e22 100644
--- a/arch/arm/mm/proc-arm1022.S
+++ b/arch/arm/mm/proc-arm1022.S
@@ -108,6 +108,20 @@ ENTRY(cpu_arm1022_do_idle)
/* ================================= CACHE ================================ */
.align 5
+
+/*
+ * flush_icache_all()
+ *
+ * Unconditionally clean and invalidate the entire icache.
+ */
+ENTRY(arm1022_flush_icache_all)
+#ifndef CONFIG_CPU_ICACHE_DISABLE
+ mov r0, #0
+ mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache
+#endif
+ mov pc, lr
+ENDPROC(arm1022_flush_icache_all)
+
/*
* flush_user_cache_all()
*
@@ -326,6 +340,7 @@ ENTRY(arm1022_dma_unmap_area)
ENDPROC(arm1022_dma_unmap_area)
ENTRY(arm1022_cache_fns)
+ .long arm1022_flush_icache_all
.long arm1022_flush_kern_cache_all
.long arm1022_flush_user_cache_all
.long arm1022_flush_user_cache_range
diff --git a/arch/arm/mm/proc-arm1026.S b/arch/arm/mm/proc-arm1026.S
index ff446c5d476..e3f7e9a166b 100644
--- a/arch/arm/mm/proc-arm1026.S
+++ b/arch/arm/mm/proc-arm1026.S
@@ -108,6 +108,20 @@ ENTRY(cpu_arm1026_do_idle)
/* ================================= CACHE ================================ */
.align 5
+
+/*
+ * flush_icache_all()
+ *
+ * Unconditionally clean and invalidate the entire icache.
+ */
+ENTRY(arm1026_flush_icache_all)
+#ifndef CONFIG_CPU_ICACHE_DISABLE
+ mov r0, #0
+ mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache
+#endif
+ mov pc, lr
+ENDPROC(arm1026_flush_icache_all)
+
/*
* flush_user_cache_all()
*
@@ -320,6 +334,7 @@ ENTRY(arm1026_dma_unmap_area)
ENDPROC(arm1026_dma_unmap_area)
ENTRY(arm1026_cache_fns)
+ .long arm1026_flush_icache_all
.long arm1026_flush_kern_cache_all
.long arm1026_flush_user_cache_all
.long arm1026_flush_user_cache_range
diff --git a/arch/arm/mm/proc-arm920.S b/arch/arm/mm/proc-arm920.S
index fecf570939f..6109f278a90 100644
--- a/arch/arm/mm/proc-arm920.S
+++ b/arch/arm/mm/proc-arm920.S
@@ -110,6 +110,17 @@ ENTRY(cpu_arm920_do_idle)
#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
/*
+ * flush_icache_all()
+ *
+ * Unconditionally clean and invalidate the entire icache.
+ */
+ENTRY(arm920_flush_icache_all)
+ mov r0, #0
+ mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache
+ mov pc, lr
+ENDPROC(arm920_flush_icache_all)
+
+/*
* flush_user_cache_all()
*
* Invalidate all cache entries in a particular address
@@ -305,6 +316,7 @@ ENTRY(arm920_dma_unmap_area)
ENDPROC(arm920_dma_unmap_area)
ENTRY(arm920_cache_fns)
+ .long arm920_flush_icache_all
.long arm920_flush_kern_cache_all
.long arm920_flush_user_cache_all
.long arm920_flush_user_cache_range
diff --git a/arch/arm/mm/proc-arm922.S b/arch/arm/mm/proc-arm922.S
index e3cbf87c948..bb2f0f46a5e 100644
--- a/arch/arm/mm/proc-arm922.S
+++ b/arch/arm/mm/proc-arm922.S
@@ -112,6 +112,17 @@ ENTRY(cpu_arm922_do_idle)
#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
/*
+ * flush_icache_all()
+ *
+ * Unconditionally clean and invalidate the entire icache.
+ */
+ENTRY(arm922_flush_icache_all)
+ mov r0, #0
+ mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache
+ mov pc, lr
+ENDPROC(arm922_flush_icache_all)
+
+/*
* flush_user_cache_all()
*
* Clean and invalidate all cache entries in a particular
@@ -307,6 +318,7 @@ ENTRY(arm922_dma_unmap_area)
ENDPROC(arm922_dma_unmap_area)
ENTRY(arm922_cache_fns)
+ .long arm922_flush_icache_all
.long arm922_flush_kern_cache_all
.long arm922_flush_user_cache_all
.long arm922_flush_user_cache_range
diff --git a/arch/arm/mm/proc-arm925.S b/arch/arm/mm/proc-arm925.S
index 572424c867b..c13e01accfe 100644
--- a/arch/arm/mm/proc-arm925.S
+++ b/arch/arm/mm/proc-arm925.S
@@ -145,6 +145,17 @@ ENTRY(cpu_arm925_do_idle)
mov pc, lr
/*
+ * flush_icache_all()
+ *
+ * Unconditionally clean and invalidate the entire icache.
+ */
+ENTRY(arm925_flush_icache_all)
+ mov r0, #0
+ mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache
+ mov pc, lr
+ENDPROC(arm925_flush_icache_all)
+
+/*
* flush_user_cache_all()
*
* Clean and invalidate all cache entries in a particular
@@ -362,6 +373,7 @@ ENTRY(arm925_dma_unmap_area)
ENDPROC(arm925_dma_unmap_area)
ENTRY(arm925_cache_fns)
+ .long arm925_flush_icache_all
.long arm925_flush_kern_cache_all
.long arm925_flush_user_cache_all
.long arm925_flush_user_cache_range
diff --git a/arch/arm/mm/proc-arm926.S b/arch/arm/mm/proc-arm926.S
index 63d168b4ebe..42eb4315740 100644
--- a/arch/arm/mm/proc-arm926.S
+++ b/arch/arm/mm/proc-arm926.S
@@ -111,6 +111,17 @@ ENTRY(cpu_arm926_do_idle)
mov pc, lr
/*
+ * flush_icache_all()
+ *
+ * Unconditionally clean and invalidate the entire icache.
+ */
+ENTRY(arm926_flush_icache_all)
+ mov r0, #0
+ mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache
+ mov pc, lr
+ENDPROC(arm926_flush_icache_all)
+
+/*
* flush_user_cache_all()
*
* Clean and invalidate all cache entries in a particular
@@ -325,6 +336,7 @@ ENTRY(arm926_dma_unmap_area)
ENDPROC(arm926_dma_unmap_area)
ENTRY(arm926_cache_fns)
+ .long arm926_flush_icache_all
.long arm926_flush_kern_cache_all
.long arm926_flush_user_cache_all
.long arm926_flush_user_cache_range
diff --git a/arch/arm/mm/proc-arm940.S b/arch/arm/mm/proc-arm940.S
index f6a62822418..7b11cdb9935 100644
--- a/arch/arm/mm/proc-arm940.S
+++ b/arch/arm/mm/proc-arm940.S
@@ -68,6 +68,17 @@ ENTRY(cpu_arm940_do_idle)
mov pc, lr
/*
+ * flush_icache_all()
+ *
+ * Unconditionally clean and invalidate the entire icache.
+ */
+ENTRY(arm940_flush_icache_all)
+ mov r0, #0
+ mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache
+ mov pc, lr
+ENDPROC(arm940_flush_icache_all)
+
+/*
* flush_user_cache_all()
*/
ENTRY(arm940_flush_user_cache_all)
@@ -254,6 +265,7 @@ ENTRY(arm940_dma_unmap_area)
ENDPROC(arm940_dma_unmap_area)
ENTRY(arm940_cache_fns)
+ .long arm940_flush_icache_all
.long arm940_flush_kern_cache_all
.long arm940_flush_user_cache_all
.long arm940_flush_user_cache_range
diff --git a/arch/arm/mm/proc-arm946.S b/arch/arm/mm/proc-arm946.S
index ea2e7f2eb95..1a5bbf08034 100644
--- a/arch/arm/mm/proc-arm946.S
+++ b/arch/arm/mm/proc-arm946.S
@@ -75,6 +75,17 @@ ENTRY(cpu_arm946_do_idle)
mov pc, lr
/*
+ * flush_icache_all()
+ *
+ * Unconditionally clean and invalidate the entire icache.
+ */
+ENTRY(arm946_flush_icache_all)
+ mov r0, #0
+ mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache
+ mov pc, lr
+ENDPROC(arm946_flush_icache_all)
+
+/*
* flush_user_cache_all()
*/
ENTRY(arm946_flush_user_cache_all)
@@ -296,6 +307,7 @@ ENTRY(arm946_dma_unmap_area)
ENDPROC(arm946_dma_unmap_area)
ENTRY(arm946_cache_fns)
+ .long arm946_flush_icache_all
.long arm946_flush_kern_cache_all
.long arm946_flush_user_cache_all
.long arm946_flush_user_cache_range
diff --git a/arch/arm/mm/proc-feroceon.S b/arch/arm/mm/proc-feroceon.S
index 578da69200c..b4597edbff9 100644
--- a/arch/arm/mm/proc-feroceon.S
+++ b/arch/arm/mm/proc-feroceon.S
@@ -124,6 +124,17 @@ ENTRY(cpu_feroceon_do_idle)
mov pc, lr
/*
+ * flush_icache_all()
+ *
+ * Unconditionally clean and invalidate the entire icache.
+ */
+ENTRY(feroceon_flush_icache_all)
+ mov r0, #0
+ mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache
+ mov pc, lr
+ENDPROC(feroceon_flush_icache_all)
+
+/*
* flush_user_cache_all()
*
* Clean and invalidate all cache entries in a particular
@@ -401,6 +412,7 @@ ENTRY(feroceon_dma_unmap_area)
ENDPROC(feroceon_dma_unmap_area)
ENTRY(feroceon_cache_fns)
+ .long feroceon_flush_icache_all
.long feroceon_flush_kern_cache_all
.long feroceon_flush_user_cache_all
.long feroceon_flush_user_cache_range
@@ -412,6 +424,7 @@ ENTRY(feroceon_cache_fns)
.long feroceon_dma_flush_range
ENTRY(feroceon_range_cache_fns)
+ .long feroceon_flush_icache_all
.long feroceon_flush_kern_cache_all
.long feroceon_flush_user_cache_all
.long feroceon_flush_user_cache_range
diff --git a/arch/arm/mm/proc-xsc3.S b/arch/arm/mm/proc-xsc3.S
index cad07e40304..ec26355cb7c 100644
--- a/arch/arm/mm/proc-xsc3.S
+++ b/arch/arm/mm/proc-xsc3.S
@@ -141,6 +141,17 @@ ENTRY(cpu_xsc3_do_idle)
/* ================================= CACHE ================================ */
/*
+ * flush_icache_all()
+ *
+ * Unconditionally clean and invalidate the entire icache.
+ */
+ENTRY(xsc3_flush_icache_all)
+ mov r0, #0
+ mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache
+ mov pc, lr
+ENDPROC(xsc3_flush_icache_all)
+
+/*
* flush_user_cache_all()
*
* Invalidate all cache entries in a particular address
@@ -325,6 +336,7 @@ ENTRY(xsc3_dma_unmap_area)
ENDPROC(xsc3_dma_unmap_area)
ENTRY(xsc3_cache_fns)
+ .long xsc3_flush_icache_all
.long xsc3_flush_kern_cache_all
.long xsc3_flush_user_cache_all
.long xsc3_flush_user_cache_range
diff --git a/arch/arm/mm/proc-xscale.S b/arch/arm/mm/proc-xscale.S
index cb245edb2c2..523408c0bb3 100644
--- a/arch/arm/mm/proc-xscale.S
+++ b/arch/arm/mm/proc-xscale.S
@@ -181,6 +181,17 @@ ENTRY(cpu_xscale_do_idle)
/* ================================= CACHE ================================ */
/*
+ * flush_icache_all()
+ *
+ * Unconditionally clean and invalidate the entire icache.
+ */
+ENTRY(xscale_flush_icache_all)
+ mov r0, #0
+ mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache
+ mov pc, lr
+ENDPROC(xscale_flush_icache_all)
+
+/*
* flush_user_cache_all()
*
* Invalidate all cache entries in a particular address
@@ -397,6 +408,7 @@ ENTRY(xscale_dma_unmap_area)
ENDPROC(xscale_dma_unmap_area)
ENTRY(xscale_cache_fns)
+ .long xscale_flush_icache_all
.long xscale_flush_kern_cache_all
.long xscale_flush_user_cache_all
.long xscale_flush_user_cache_range
diff --git a/arch/arm/plat-mxc/Makefile b/arch/arm/plat-mxc/Makefile
index 06875b4dd70..37267095278 100644
--- a/arch/arm/plat-mxc/Makefile
+++ b/arch/arm/plat-mxc/Makefile
@@ -18,6 +18,7 @@ obj-$(CONFIG_MXC_USE_EPIT) += epit.o
obj-$(CONFIG_ARCH_MXC_AUDMUX_V1) += audmux-v1.o
obj-$(CONFIG_ARCH_MXC_AUDMUX_V2) += audmux-v2.o
obj-$(CONFIG_MXC_DEBUG_BOARD) += 3ds_debugboard.o
+obj-$(CONFIG_CPU_FREQ_IMX) += cpufreq.o
ifdef CONFIG_SND_IMX_SOC
obj-y += ssi-fiq.o
obj-y += ssi-fiq-ksym.o
diff --git a/arch/arm/plat-mxc/cpufreq.c b/arch/arm/plat-mxc/cpufreq.c
new file mode 100644
index 00000000000..039538e6879
--- /dev/null
+++ b/arch/arm/plat-mxc/cpufreq.c
@@ -0,0 +1,206 @@
+/*
+ * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/*
+ * A driver for the Freescale Semiconductor i.MXC CPUfreq module.
+ * The CPUFREQ driver is for controling CPU frequency. It allows you to change
+ * the CPU clock speed on the fly.
+ */
+
+#include <linux/cpufreq.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/slab.h>
+#include <mach/hardware.h>
+#include <mach/clock.h>
+
+#define CLK32_FREQ 32768
+#define NANOSECOND (1000 * 1000 * 1000)
+
+struct cpu_op *(*get_cpu_op)(int *op);
+
+static int cpu_freq_khz_min;
+static int cpu_freq_khz_max;
+
+static struct clk *cpu_clk;
+static struct cpufreq_frequency_table *imx_freq_table;
+
+static int cpu_op_nr;
+static struct cpu_op *cpu_op_tbl;
+
+static int set_cpu_freq(int freq)
+{
+ int ret = 0;
+ int org_cpu_rate;
+
+ org_cpu_rate = clk_get_rate(cpu_clk);
+ if (org_cpu_rate == freq)
+ return ret;
+
+ ret = clk_set_rate(cpu_clk, freq);
+ if (ret != 0) {
+ printk(KERN_DEBUG "cannot set CPU clock rate\n");
+ return ret;
+ }
+
+ return ret;
+}
+
+static int mxc_verify_speed(struct cpufreq_policy *policy)
+{
+ if (policy->cpu != 0)
+ return -EINVAL;
+
+ return cpufreq_frequency_table_verify(policy, imx_freq_table);
+}
+
+static unsigned int mxc_get_speed(unsigned int cpu)
+{
+ if (cpu)
+ return 0;
+
+ return clk_get_rate(cpu_clk) / 1000;
+}
+
+static int mxc_set_target(struct cpufreq_policy *policy,
+ unsigned int target_freq, unsigned int relation)
+{
+ struct cpufreq_freqs freqs;
+ int freq_Hz;
+ int ret = 0;
+ unsigned int index;
+
+ cpufreq_frequency_table_target(policy, imx_freq_table,
+ target_freq, relation, &index);
+ freq_Hz = imx_freq_table[index].frequency * 1000;
+
+ freqs.old = clk_get_rate(cpu_clk) / 1000;
+ freqs.new = freq_Hz / 1000;
+ freqs.cpu = 0;
+ freqs.flags = 0;
+ cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
+
+ ret = set_cpu_freq(freq_Hz);
+
+ cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
+
+ return ret;
+}
+
+static int __init mxc_cpufreq_init(struct cpufreq_policy *policy)
+{
+ int ret;
+ int i;
+
+ printk(KERN_INFO "i.MXC CPU frequency driver\n");
+
+ if (policy->cpu != 0)
+ return -EINVAL;
+
+ if (!get_cpu_op)
+ return -EINVAL;
+
+ cpu_clk = clk_get(NULL, "cpu_clk");
+ if (IS_ERR(cpu_clk)) {
+ printk(KERN_ERR "%s: failed to get cpu clock\n", __func__);
+ return PTR_ERR(cpu_clk);
+ }
+
+ cpu_op_tbl = get_cpu_op(&cpu_op_nr);
+
+ cpu_freq_khz_min = cpu_op_tbl[0].cpu_rate / 1000;
+ cpu_freq_khz_max = cpu_op_tbl[0].cpu_rate / 1000;
+
+ imx_freq_table = kmalloc(
+ sizeof(struct cpufreq_frequency_table) * (cpu_op_nr + 1),
+ GFP_KERNEL);
+ if (!imx_freq_table) {
+ ret = -ENOMEM;
+ goto err1;
+ }
+
+ for (i = 0; i < cpu_op_nr; i++) {
+ imx_freq_table[i].index = i;
+ imx_freq_table[i].frequency = cpu_op_tbl[i].cpu_rate / 1000;
+
+ if ((cpu_op_tbl[i].cpu_rate / 1000) < cpu_freq_khz_min)
+ cpu_freq_khz_min = cpu_op_tbl[i].cpu_rate / 1000;
+
+ if ((cpu_op_tbl[i].cpu_rate / 1000) > cpu_freq_khz_max)
+ cpu_freq_khz_max = cpu_op_tbl[i].cpu_rate / 1000;
+ }
+
+ imx_freq_table[i].index = i;
+ imx_freq_table[i].frequency = CPUFREQ_TABLE_END;
+
+ policy->cur = clk_get_rate(cpu_clk) / 1000;
+ policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
+ policy->min = policy->cpuinfo.min_freq = cpu_freq_khz_min;
+ policy->max = policy->cpuinfo.max_freq = cpu_freq_khz_max;
+
+ /* Manual states, that PLL stabilizes in two CLK32 periods */
+ policy->cpuinfo.transition_latency = 2 * NANOSECOND / CLK32_FREQ;
+
+ ret = cpufreq_frequency_table_cpuinfo(policy, imx_freq_table);
+
+ if (ret < 0) {
+ printk(KERN_ERR "%s: failed to register i.MXC CPUfreq \
+ with error code %d\n", __func__, ret);
+ goto err;
+ }
+
+ cpufreq_frequency_table_get_attr(imx_freq_table, policy->cpu);
+ return 0;
+err:
+ kfree(imx_freq_table);
+err1:
+ clk_put(cpu_clk);
+ return ret;
+}
+
+static int mxc_cpufreq_exit(struct cpufreq_policy *policy)
+{
+ cpufreq_frequency_table_put_attr(policy->cpu);
+
+ set_cpu_freq(cpu_freq_khz_max * 1000);
+ clk_put(cpu_clk);
+ kfree(imx_freq_table);
+ return 0;
+}
+
+static struct cpufreq_driver mxc_driver = {
+ .flags = CPUFREQ_STICKY,
+ .verify = mxc_verify_speed,
+ .target = mxc_set_target,
+ .get = mxc_get_speed,
+ .init = mxc_cpufreq_init,
+ .exit = mxc_cpufreq_exit,
+ .name = "imx",
+};
+
+static int __devinit mxc_cpufreq_driver_init(void)
+{
+ return cpufreq_register_driver(&mxc_driver);
+}
+
+static void mxc_cpufreq_driver_exit(void)
+{
+ cpufreq_unregister_driver(&mxc_driver);
+}
+
+module_init(mxc_cpufreq_driver_init);
+module_exit(mxc_cpufreq_driver_exit);
+
+MODULE_AUTHOR("Freescale Semiconductor Inc. Yong Shen <yong.shen@linaro.org>");
+MODULE_DESCRIPTION("CPUfreq driver for i.MX");
+MODULE_LICENSE("GPL");
diff --git a/arch/arm/plat-mxc/devices/Kconfig b/arch/arm/plat-mxc/devices/Kconfig
index 404799487f1..9aa6f3ea901 100644
--- a/arch/arm/plat-mxc/devices/Kconfig
+++ b/arch/arm/plat-mxc/devices/Kconfig
@@ -6,9 +6,13 @@ config IMX_HAVE_PLATFORM_FEC
default y if ARCH_MX25 || SOC_IMX27 || ARCH_MX35 || ARCH_MX51
config IMX_HAVE_PLATFORM_FLEXCAN
- select HAVE_CAN_FLEXCAN
+ select HAVE_CAN_FLEXCAN if CAN
bool
+config IMX_HAVE_PLATFORM_GPIO_KEYS
+ bool
+ default y if ARCH_MX51
+
config IMX_HAVE_PLATFORM_IMX_I2C
bool
diff --git a/arch/arm/plat-mxc/devices/Makefile b/arch/arm/plat-mxc/devices/Makefile
index 0a3c1f08941..45aefeb283b 100644
--- a/arch/arm/plat-mxc/devices/Makefile
+++ b/arch/arm/plat-mxc/devices/Makefile
@@ -1,6 +1,7 @@
obj-$(CONFIG_IMX_HAVE_PLATFORM_ESDHC) += platform-esdhc.o
obj-$(CONFIG_IMX_HAVE_PLATFORM_FEC) += platform-fec.o
obj-$(CONFIG_IMX_HAVE_PLATFORM_FLEXCAN) += platform-flexcan.o
+obj-$(CONFIG_IMX_HAVE_PLATFORM_GPIO_KEYS) += platform-gpio_keys.o
obj-y += platform-imx-dma.o
obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX_I2C) += platform-imx-i2c.o
obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX_SSI) += platform-imx-ssi.o
diff --git a/arch/arm/plat-mxc/devices/platform-gpio_keys.c b/arch/arm/plat-mxc/devices/platform-gpio_keys.c
new file mode 100644
index 00000000000..1c53a532ea0
--- /dev/null
+++ b/arch/arm/plat-mxc/devices/platform-gpio_keys.c
@@ -0,0 +1,27 @@
+/*
+ * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ * Boston, MA 02110-1301, USA.
+ */
+#include <asm/sizes.h>
+#include <mach/hardware.h>
+#include <mach/devices-common.h>
+
+struct platform_device *__init imx_add_gpio_keys(
+ const struct gpio_keys_platform_data *pdata)
+{
+ return imx_add_platform_device("gpio-keys", -1, NULL,
+ 0, pdata, sizeof(*pdata));
+}
diff --git a/arch/arm/plat-mxc/gpio.c b/arch/arm/plat-mxc/gpio.c
index 9d38da077ed..9c3e36232b5 100644
--- a/arch/arm/plat-mxc/gpio.c
+++ b/arch/arm/plat-mxc/gpio.c
@@ -20,6 +20,7 @@
*/
#include <linux/init.h>
+#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/irq.h>
#include <linux/gpio.h>
@@ -201,11 +202,42 @@ static void mx2_gpio_irq_handler(u32 irq, struct irq_desc *desc)
}
}
+/*
+ * Set interrupt number "irq" in the GPIO as a wake-up source.
+ * While system is running, all registered GPIO interrupts need to have
+ * wake-up enabled. When system is suspended, only selected GPIO interrupts
+ * need to have wake-up enabled.
+ * @param irq interrupt source number
+ * @param enable enable as wake-up if equal to non-zero
+ * @return This function returns 0 on success.
+ */
+static int gpio_set_wake_irq(u32 irq, u32 enable)
+{
+ u32 gpio = irq_to_gpio(irq);
+ u32 gpio_idx = gpio & 0x1F;
+ struct mxc_gpio_port *port = &mxc_gpio_ports[gpio / 32];
+
+ if (enable) {
+ if (port->irq_high && (gpio_idx >= 16))
+ enable_irq_wake(port->irq_high);
+ else
+ enable_irq_wake(port->irq);
+ } else {
+ if (port->irq_high && (gpio_idx >= 16))
+ disable_irq_wake(port->irq_high);
+ else
+ disable_irq_wake(port->irq);
+ }
+
+ return 0;
+}
+
static struct irq_chip gpio_irq_chip = {
.ack = gpio_ack_irq,
.mask = gpio_mask_irq,
.unmask = gpio_unmask_irq,
.set_type = gpio_set_irq_type,
+ .set_wake = gpio_set_wake_irq,
};
static void _set_gpio_direction(struct gpio_chip *chip, unsigned offset,
diff --git a/arch/arm/plat-mxc/include/mach/devices-common.h b/arch/arm/plat-mxc/include/mach/devices-common.h
index 86d7575a564..8c6896fd1e5 100644
--- a/arch/arm/plat-mxc/include/mach/devices-common.h
+++ b/arch/arm/plat-mxc/include/mach/devices-common.h
@@ -29,6 +29,10 @@ struct platform_device *__init imx_add_flexcan(int id,
resource_size_t irq,
const struct flexcan_platform_data *pdata);
+#include <linux/gpio_keys.h>
+struct platform_device *__init imx_add_gpio_keys(
+ const struct gpio_keys_platform_data *pdata);
+
#include <mach/i2c.h>
struct imx_imx_i2c_data {
int id;
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx51.h b/arch/arm/plat-mxc/include/mach/iomux-mx51.h
index e46b1c2836d..d7a41e9a260 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-mx51.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-mx51.h
@@ -45,6 +45,8 @@ typedef enum iomux_config {
PAD_CTL_PKE | PAD_CTL_HYS)
#define MX51_GPIO_PAD_CTRL (PAD_CTL_DSE_HIGH | PAD_CTL_PKE | \
PAD_CTL_SRE_FAST)
+#define MX51_GPIO_PAD_CTRL_2 (PAD_CTL_SRE_FAST | PAD_CTL_DSE_HIGH | \
+ PAD_CTL_PUS_100K_UP)
#define MX51_ECSPI_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_PKE | PAD_CTL_DSE_HIGH | \
PAD_CTL_SRE_FAST)
#define MX51_SDHCI_PAD_CTRL (PAD_CTL_DSE_HIGH | PAD_CTL_PUS_47K_UP | \
diff --git a/arch/arm/plat-mxc/include/mach/mx31.h b/arch/arm/plat-mxc/include/mach/mx31.h
index 03e2afabc9f..61cfe827498 100644
--- a/arch/arm/plat-mxc/include/mach/mx31.h
+++ b/arch/arm/plat-mxc/include/mach/mx31.h
@@ -240,7 +240,6 @@ static inline void mx31_setup_weimcs(size_t cs,
#define MPEG4_ENC_BASE_ADDR MX31_MPEG4_ENC_BASE_ADDR
#define MXC_INT_MPEG4_ENCODER MX31_INT_MPEG4_ENCODER
#define MXC_INT_FIRI MX31_INT_FIRI
-#define MXC_INT_MMC_SDHC1 MX31_INT_MMC_SDHC1
#define MXC_INT_MBX MX31_INT_MBX
#define MXC_INT_CSPI3 MX31_INT_CSPI3
#define MXC_INT_SIM2 MX31_INT_SIM2
diff --git a/arch/arm/plat-mxc/include/mach/mx35.h b/arch/arm/plat-mxc/include/mach/mx35.h
index ff905cb3245..6267cff6035 100644
--- a/arch/arm/plat-mxc/include/mach/mx35.h
+++ b/arch/arm/plat-mxc/include/mach/mx35.h
@@ -197,8 +197,6 @@
/* these should go away */
#define MXC_FEC_BASE_ADDR MX35_FEC_BASE_ADDR
#define MXC_INT_OWIRE MX35_INT_OWIRE
-#define MXC_INT_MMC_SDHC2 MX35_INT_MMC_SDHC2
-#define MXC_INT_MMC_SDHC3 MX35_INT_MMC_SDHC3
#define MXC_INT_GPU2D MX35_INT_GPU2D
#define MXC_INT_ASRC MX35_INT_ASRC
#define MXC_INT_USBHS MX35_INT_USBHS
diff --git a/arch/arm/plat-mxc/include/mach/mxc.h b/arch/arm/plat-mxc/include/mach/mxc.h
index a790bf21297..a42c7207082 100644
--- a/arch/arm/plat-mxc/include/mach/mxc.h
+++ b/arch/arm/plat-mxc/include/mach/mxc.h
@@ -1,5 +1,5 @@
/*
- * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2004-2007, 2010 Freescale Semiconductor, Inc. All Rights Reserved.
* Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
*
* This program is free software; you can redistribute it and/or
@@ -20,6 +20,8 @@
#ifndef __ASM_ARCH_MXC_H__
#define __ASM_ARCH_MXC_H__
+#include <linux/types.h>
+
#ifndef __ASM_ARCH_MXC_HARDWARE_H__
#error "Do not include directly."
#endif
@@ -133,6 +135,15 @@ extern unsigned int __mxc_cpu_type;
# define cpu_is_mxc91231() (0)
#endif
+#ifndef __ASSEMBLY__
+
+struct cpu_op {
+ u32 cpu_rate;
+};
+
+extern struct cpu_op *(*get_cpu_op)(int *op);
+#endif
+
#if defined(CONFIG_ARCH_MX3) || defined(CONFIG_ARCH_MX2)
/* These are deprecated, use mx[23][157]_setup_weimcs instead. */
#define CSCR_U(n) (IO_ADDRESS(WEIM_BASE_ADDR + n * 0x10))
diff --git a/arch/arm/plat-pxa/include/plat/pxa3xx_nand.h b/arch/arm/plat-pxa/include/plat/pxa3xx_nand.h
index 3478eae32d8..01a8448e471 100644
--- a/arch/arm/plat-pxa/include/plat/pxa3xx_nand.h
+++ b/arch/arm/plat-pxa/include/plat/pxa3xx_nand.h
@@ -30,15 +30,15 @@ struct pxa3xx_nand_cmdset {
};
struct pxa3xx_nand_flash {
- const struct pxa3xx_nand_timing *timing; /* NAND Flash timing */
- const struct pxa3xx_nand_cmdset *cmdset;
-
- uint32_t page_per_block;/* Pages per block (PG_PER_BLK) */
- uint32_t page_size; /* Page size in bytes (PAGE_SZ) */
- uint32_t flash_width; /* Width of Flash memory (DWIDTH_M) */
- uint32_t dfc_width; /* Width of flash controller(DWIDTH_C) */
- uint32_t num_blocks; /* Number of physical blocks in Flash */
- uint32_t chip_id;
+ uint32_t chip_id;
+ unsigned int page_per_block; /* Pages per block (PG_PER_BLK) */
+ unsigned int page_size; /* Page size in bytes (PAGE_SZ) */
+ unsigned int flash_width; /* Width of Flash memory (DWIDTH_M) */
+ unsigned int dfc_width; /* Width of flash controller(DWIDTH_C) */
+ unsigned int num_blocks; /* Number of physical blocks in Flash */
+
+ struct pxa3xx_nand_cmdset *cmdset; /* NAND command set */
+ struct pxa3xx_nand_timing *timing; /* NAND Flash timing */
};
struct pxa3xx_nand_platform_data {
diff --git a/arch/arm/plat-s3c24xx/common-smdk.c b/arch/arm/plat-s3c24xx/common-smdk.c
index 7b44d0c592b..bcc43f34627 100644
--- a/arch/arm/plat-s3c24xx/common-smdk.c
+++ b/arch/arm/plat-s3c24xx/common-smdk.c
@@ -147,7 +147,7 @@ static struct mtd_partition smdk_default_nand_part[] = {
[7] = {
.name = "S3C2410 flash partition 7",
.offset = SZ_1M * 48,
- .size = SZ_16M,
+ .size = MTDPART_SIZ_FULL,
}
};
diff --git a/arch/arm/plat-s3c24xx/gpiolib.c b/arch/arm/plat-s3c24xx/gpiolib.c
index ae9d3c2403f..24c6f5a3059 100644
--- a/arch/arm/plat-s3c24xx/gpiolib.c
+++ b/arch/arm/plat-s3c24xx/gpiolib.c
@@ -74,11 +74,6 @@ static int s3c24xx_gpiolib_bankf_toirq(struct gpio_chip *chip, unsigned offset)
return -EINVAL;
}
-static int s3c24xx_gpiolib_bankg_toirq(struct gpio_chip *chip, unsigned offset)
-{
- return IRQ_EINT8 + offset;
-}
-
static struct s3c_gpio_cfg s3c24xx_gpiocfg_banka = {
.set_config = s3c_gpio_setcfg_s3c24xx_a,
.get_config = s3c_gpio_getcfg_s3c24xx_a,
@@ -159,12 +154,13 @@ struct s3c_gpio_chip s3c24xx_gpios[] = {
[6] = {
.base = S3C2410_GPGCON,
.pm = __gpio_pm(&s3c_gpio_pm_2bit),
+ .irq_base = IRQ_EINT8,
.chip = {
.base = S3C2410_GPG(0),
.owner = THIS_MODULE,
.label = "GPIOG",
.ngpio = 16,
- .to_irq = s3c24xx_gpiolib_bankg_toirq,
+ .to_irq = samsung_gpiolib_to_irq,
},
}, {
.base = S3C2410_GPHCON,
diff --git a/arch/arm/plat-s5p/Kconfig b/arch/arm/plat-s5p/Kconfig
index 25960966af7..65dbfa8e0a8 100644
--- a/arch/arm/plat-s5p/Kconfig
+++ b/arch/arm/plat-s5p/Kconfig
@@ -32,6 +32,11 @@ config S5P_EXT_INT
Use the external interrupts (other than GPIO interrupts.)
Note: Do not choose this for S5P6440 and S5P6450.
+config S5P_GPIO_INT
+ bool
+ help
+ Common code for the GPIO interrupts (other than external interrupts.)
+
config S5P_DEV_FIMC0
bool
help
diff --git a/arch/arm/plat-s5p/Makefile b/arch/arm/plat-s5p/Makefile
index f3e917e27da..de65238a7ae 100644
--- a/arch/arm/plat-s5p/Makefile
+++ b/arch/arm/plat-s5p/Makefile
@@ -18,6 +18,9 @@ obj-y += cpu.o
obj-y += clock.o
obj-y += irq.o
obj-$(CONFIG_S5P_EXT_INT) += irq-eint.o
+obj-$(CONFIG_S5P_GPIO_INT) += irq-gpioint.o
+obj-$(CONFIG_PM) += pm.o
+obj-$(CONFIG_PM) += irq-pm.o
# devices
diff --git a/arch/arm/plat-s5p/clock.c b/arch/arm/plat-s5p/clock.c
index 8aaf4e6b60c..8d081d968c5 100644
--- a/arch/arm/plat-s5p/clock.c
+++ b/arch/arm/plat-s5p/clock.c
@@ -21,6 +21,8 @@
#include <linux/io.h>
#include <asm/div64.h>
+#include <mach/regs-clock.h>
+
#include <plat/clock.h>
#include <plat/clock-clksrc.h>
#include <plat/s5p-clock.h>
@@ -88,14 +90,6 @@ struct clk clk_fout_vpll = {
.ctrlbit = (1 << 31),
};
-/* ARM clock */
-struct clk clk_arm = {
- .name = "armclk",
- .id = -1,
- .rate = 0,
- .ctrlbit = 0,
-};
-
/* Possible clock sources for APLL Mux */
static struct clk *clk_src_apll_list[] = {
[0] = &clk_fin_apll,
@@ -156,6 +150,24 @@ int s5p_gatectrl(void __iomem *reg, struct clk *clk, int enable)
return 0;
}
+int s5p_epll_enable(struct clk *clk, int enable)
+{
+ unsigned int ctrlbit = clk->ctrlbit;
+ unsigned int epll_con = __raw_readl(S5P_EPLL_CON) & ~ctrlbit;
+
+ if (enable)
+ __raw_writel(epll_con | ctrlbit, S5P_EPLL_CON);
+ else
+ __raw_writel(epll_con, S5P_EPLL_CON);
+
+ return 0;
+}
+
+unsigned long s5p_epll_get_rate(struct clk *clk)
+{
+ return clk->rate;
+}
+
static struct clk *s5p_clks[] __initdata = {
&clk_ext_xtal_mux,
&clk_48m,
@@ -165,7 +177,6 @@ static struct clk *s5p_clks[] __initdata = {
&clk_fout_epll,
&clk_fout_dpll,
&clk_fout_vpll,
- &clk_arm,
&clk_vpll,
&clk_xusbxti,
};
diff --git a/arch/arm/plat-s5p/include/plat/irqs.h b/arch/arm/plat-s5p/include/plat/irqs.h
index 3fb3a3a1746..ba9121c60a2 100644
--- a/arch/arm/plat-s5p/include/plat/irqs.h
+++ b/arch/arm/plat-s5p/include/plat/irqs.h
@@ -94,4 +94,22 @@
((irq) - S5P_EINT_BASE1) : \
((irq) + 16 - S5P_EINT_BASE2))
+#define IRQ_EINT_BIT(x) EINT_OFFSET(x)
+
+/* Typically only a few gpio chips require gpio interrupt support.
+ To avoid memory waste irq descriptors are allocated only for
+ S5P_GPIOINT_GROUP_COUNT chips, each with total number of
+ S5P_GPIOINT_GROUP_SIZE pins/irqs. Each GPIOINT group can be assiged
+ to any gpio chip with the s5p_register_gpio_interrupt() function */
+#define S5P_GPIOINT_GROUP_COUNT 4
+#define S5P_GPIOINT_GROUP_SIZE 8
+#define S5P_GPIOINT_COUNT (S5P_GPIOINT_GROUP_COUNT * S5P_GPIOINT_GROUP_SIZE)
+
+/* IRQ types common for all s5p platforms */
+#define S5P_IRQ_TYPE_LEVEL_LOW (0x00)
+#define S5P_IRQ_TYPE_LEVEL_HIGH (0x01)
+#define S5P_IRQ_TYPE_EDGE_FALLING (0x02)
+#define S5P_IRQ_TYPE_EDGE_RISING (0x03)
+#define S5P_IRQ_TYPE_EDGE_BOTH (0x04)
+
#endif /* __ASM_PLAT_S5P_IRQS_H */
diff --git a/arch/arm/plat-s5p/include/plat/map-s5p.h b/arch/arm/plat-s5p/include/plat/map-s5p.h
index c4ff88bf647..fef353d4451 100644
--- a/arch/arm/plat-s5p/include/plat/map-s5p.h
+++ b/arch/arm/plat-s5p/include/plat/map-s5p.h
@@ -13,24 +13,38 @@
#ifndef __ASM_PLAT_MAP_S5P_H
#define __ASM_PLAT_MAP_S5P_H __FILE__
-#define S5P_VA_CHIPID S3C_ADDR(0x00700000)
-#define S5P_VA_GPIO S3C_ADDR(0x00500000)
-#define S5P_VA_SYSTIMER S3C_ADDR(0x01200000)
-#define S5P_VA_SROMC S3C_ADDR(0x01100000)
-#define S5P_VA_SYSRAM S3C_ADDR(0x01180000)
-
-#define S5P_VA_COMBINER_BASE S3C_ADDR(0x00600000)
+#define S5P_VA_CHIPID S3C_ADDR(0x02000000)
+#define S5P_VA_CMU S3C_ADDR(0x02100000)
+#define S5P_VA_GPIO S3C_ADDR(0x02200000)
+#define S5P_VA_GPIO1 S5P_VA_GPIO
+#define S5P_VA_GPIO2 S3C_ADDR(0x02240000)
+#define S5P_VA_GPIO3 S3C_ADDR(0x02280000)
+
+#define S5P_VA_SYSRAM S3C_ADDR(0x02400000)
+#define S5P_VA_DMC0 S3C_ADDR(0x02440000)
+#define S5P_VA_DMC1 S3C_ADDR(0x02480000)
+#define S5P_VA_SROMC S3C_ADDR(0x024C0000)
+
+#define S5P_VA_SYSTIMER S3C_ADDR(0x02500000)
+#define S5P_VA_L2CC S3C_ADDR(0x02600000)
+
+#define S5P_VA_COMBINER_BASE S3C_ADDR(0x02700000)
#define S5P_VA_COMBINER(x) (S5P_VA_COMBINER_BASE + ((x) >> 2) * 0x10)
-#define S5P_VA_COREPERI_BASE S3C_ADDR(0x00800000)
+#define S5P_VA_COREPERI_BASE S3C_ADDR(0x02800000)
#define S5P_VA_COREPERI(x) (S5P_VA_COREPERI_BASE + (x))
#define S5P_VA_SCU S5P_VA_COREPERI(0x0)
#define S5P_VA_GIC_CPU S5P_VA_COREPERI(0x100)
#define S5P_VA_TWD S5P_VA_COREPERI(0x600)
#define S5P_VA_GIC_DIST S5P_VA_COREPERI(0x1000)
-#define S5P_VA_L2CC S3C_ADDR(0x00900000)
-#define S5P_VA_CMU S3C_ADDR(0x00920000)
+#define S3C_VA_USB_HSPHY S3C_ADDR(0x02900000)
+
+#define VA_VIC(x) (S3C_VA_IRQ + ((x) * 0x10000))
+#define VA_VIC0 VA_VIC(0)
+#define VA_VIC1 VA_VIC(1)
+#define VA_VIC2 VA_VIC(2)
+#define VA_VIC3 VA_VIC(3)
#define S5P_VA_UART(x) (S3C_VA_UART + ((x) * S3C_UART_OFFSET))
#define S5P_VA_UART0 S5P_VA_UART(0)
@@ -42,10 +56,4 @@
#define S3C_UART_OFFSET (0x400)
#endif
-#define VA_VIC(x) (S3C_VA_IRQ + ((x) * 0x10000))
-#define VA_VIC0 VA_VIC(0)
-#define VA_VIC1 VA_VIC(1)
-#define VA_VIC2 VA_VIC(2)
-#define VA_VIC3 VA_VIC(3)
-
#endif /* __ASM_PLAT_MAP_S5P_H */
diff --git a/arch/arm/plat-s5p/include/plat/s5p-clock.h b/arch/arm/plat-s5p/include/plat/s5p-clock.h
index 17036c89840..2b6dcff8ab2 100644
--- a/arch/arm/plat-s5p/include/plat/s5p-clock.h
+++ b/arch/arm/plat-s5p/include/plat/s5p-clock.h
@@ -43,4 +43,8 @@ extern struct clksrc_sources clk_src_dpll;
extern int s5p_gatectrl(void __iomem *reg, struct clk *clk, int enable);
+/* Common EPLL operations for S5P platform */
+extern int s5p_epll_enable(struct clk *clk, int enable);
+extern unsigned long s5p_epll_get_rate(struct clk *clk);
+
#endif /* __ASM_PLAT_S5P_CLOCK_H */
diff --git a/arch/arm/plat-s5p/irq-eint.c b/arch/arm/plat-s5p/irq-eint.c
index f36cd332702..752f1a645f9 100644
--- a/arch/arm/plat-s5p/irq-eint.c
+++ b/arch/arm/plat-s5p/irq-eint.c
@@ -67,23 +67,23 @@ static int s5p_irq_eint_set_type(unsigned int irq, unsigned int type)
switch (type) {
case IRQ_TYPE_EDGE_RISING:
- newvalue = S5P_EXTINT_RISEEDGE;
+ newvalue = S5P_IRQ_TYPE_EDGE_RISING;
break;
case IRQ_TYPE_EDGE_FALLING:
- newvalue = S5P_EXTINT_FALLEDGE;
+ newvalue = S5P_IRQ_TYPE_EDGE_FALLING;
break;
case IRQ_TYPE_EDGE_BOTH:
- newvalue = S5P_EXTINT_BOTHEDGE;
+ newvalue = S5P_IRQ_TYPE_EDGE_BOTH;
break;
case IRQ_TYPE_LEVEL_LOW:
- newvalue = S5P_EXTINT_LOWLEV;
+ newvalue = S5P_IRQ_TYPE_LEVEL_LOW;
break;
case IRQ_TYPE_LEVEL_HIGH:
- newvalue = S5P_EXTINT_HILEV;
+ newvalue = S5P_IRQ_TYPE_LEVEL_HIGH;
break;
default:
diff --git a/arch/arm/plat-s5p/irq-gpioint.c b/arch/arm/plat-s5p/irq-gpioint.c
new file mode 100644
index 00000000000..0e5dc8cbf5e
--- /dev/null
+++ b/arch/arm/plat-s5p/irq-gpioint.c
@@ -0,0 +1,237 @@
+/* linux/arch/arm/plat-s5p/irq-gpioint.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * Author: Kyungmin Park <kyungmin.park@samsung.com>
+ * Author: Joonyoung Shim <jy0922.shim@samsung.com>
+ * Author: Marek Szyprowski <m.szyprowski@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+
+#include <mach/map.h>
+#include <plat/gpio-core.h>
+#include <plat/gpio-cfg.h>
+
+#define S5P_GPIOREG(x) (S5P_VA_GPIO + (x))
+
+#define GPIOINT_CON_OFFSET 0x700
+#define GPIOINT_MASK_OFFSET 0x900
+#define GPIOINT_PEND_OFFSET 0xA00
+
+static struct s3c_gpio_chip *irq_chips[S5P_GPIOINT_GROUP_MAXNR];
+
+static int s5p_gpioint_get_group(unsigned int irq)
+{
+ struct gpio_chip *chip = get_irq_data(irq);
+ struct s3c_gpio_chip *s3c_chip = container_of(chip,
+ struct s3c_gpio_chip, chip);
+ int group;
+
+ for (group = 0; group < S5P_GPIOINT_GROUP_MAXNR; group++)
+ if (s3c_chip == irq_chips[group])
+ break;
+
+ return group;
+}
+
+static int s5p_gpioint_get_offset(unsigned int irq)
+{
+ struct gpio_chip *chip = get_irq_data(irq);
+ struct s3c_gpio_chip *s3c_chip = container_of(chip,
+ struct s3c_gpio_chip, chip);
+
+ return irq - s3c_chip->irq_base;
+}
+
+static void s5p_gpioint_ack(unsigned int irq)
+{
+ int group, offset, pend_offset;
+ unsigned int value;
+
+ group = s5p_gpioint_get_group(irq);
+ offset = s5p_gpioint_get_offset(irq);
+ pend_offset = group << 2;
+
+ value = __raw_readl(S5P_GPIOREG(GPIOINT_PEND_OFFSET) + pend_offset);
+ value |= 1 << offset;
+ __raw_writel(value, S5P_GPIOREG(GPIOINT_PEND_OFFSET) + pend_offset);
+}
+
+static void s5p_gpioint_mask(unsigned int irq)
+{
+ int group, offset, mask_offset;
+ unsigned int value;
+
+ group = s5p_gpioint_get_group(irq);
+ offset = s5p_gpioint_get_offset(irq);
+ mask_offset = group << 2;
+
+ value = __raw_readl(S5P_GPIOREG(GPIOINT_MASK_OFFSET) + mask_offset);
+ value |= 1 << offset;
+ __raw_writel(value, S5P_GPIOREG(GPIOINT_MASK_OFFSET) + mask_offset);
+}
+
+static void s5p_gpioint_unmask(unsigned int irq)
+{
+ int group, offset, mask_offset;
+ unsigned int value;
+
+ group = s5p_gpioint_get_group(irq);
+ offset = s5p_gpioint_get_offset(irq);
+ mask_offset = group << 2;
+
+ value = __raw_readl(S5P_GPIOREG(GPIOINT_MASK_OFFSET) + mask_offset);
+ value &= ~(1 << offset);
+ __raw_writel(value, S5P_GPIOREG(GPIOINT_MASK_OFFSET) + mask_offset);
+}
+
+static void s5p_gpioint_mask_ack(unsigned int irq)
+{
+ s5p_gpioint_mask(irq);
+ s5p_gpioint_ack(irq);
+}
+
+static int s5p_gpioint_set_type(unsigned int irq, unsigned int type)
+{
+ int group, offset, con_offset;
+ unsigned int value;
+
+ group = s5p_gpioint_get_group(irq);
+ offset = s5p_gpioint_get_offset(irq);
+ con_offset = group << 2;
+
+ switch (type) {
+ case IRQ_TYPE_EDGE_RISING:
+ type = S5P_IRQ_TYPE_EDGE_RISING;
+ break;
+ case IRQ_TYPE_EDGE_FALLING:
+ type = S5P_IRQ_TYPE_EDGE_FALLING;
+ break;
+ case IRQ_TYPE_EDGE_BOTH:
+ type = S5P_IRQ_TYPE_EDGE_BOTH;
+ break;
+ case IRQ_TYPE_LEVEL_HIGH:
+ type = S5P_IRQ_TYPE_LEVEL_HIGH;
+ break;
+ case IRQ_TYPE_LEVEL_LOW:
+ type = S5P_IRQ_TYPE_LEVEL_LOW;
+ break;
+ case IRQ_TYPE_NONE:
+ default:
+ printk(KERN_WARNING "No irq type\n");
+ return -EINVAL;
+ }
+
+ value = __raw_readl(S5P_GPIOREG(GPIOINT_CON_OFFSET) + con_offset);
+ value &= ~(0x7 << (offset * 0x4));
+ value |= (type << (offset * 0x4));
+ __raw_writel(value, S5P_GPIOREG(GPIOINT_CON_OFFSET) + con_offset);
+
+ return 0;
+}
+
+struct irq_chip s5p_gpioint = {
+ .name = "s5p_gpioint",
+ .ack = s5p_gpioint_ack,
+ .mask = s5p_gpioint_mask,
+ .mask_ack = s5p_gpioint_mask_ack,
+ .unmask = s5p_gpioint_unmask,
+ .set_type = s5p_gpioint_set_type,
+};
+
+static void s5p_gpioint_handler(unsigned int irq, struct irq_desc *desc)
+{
+ int group, offset, pend_offset, mask_offset;
+ int real_irq;
+ unsigned int pend, mask;
+
+ for (group = 0; group < S5P_GPIOINT_GROUP_MAXNR; group++) {
+ pend_offset = group << 2;
+ pend = __raw_readl(S5P_GPIOREG(GPIOINT_PEND_OFFSET) +
+ pend_offset);
+ if (!pend)
+ continue;
+
+ mask_offset = group << 2;
+ mask = __raw_readl(S5P_GPIOREG(GPIOINT_MASK_OFFSET) +
+ mask_offset);
+ pend &= ~mask;
+
+ for (offset = 0; offset < 8; offset++) {
+ if (pend & (1 << offset)) {
+ struct s3c_gpio_chip *chip = irq_chips[group];
+ if (chip) {
+ real_irq = chip->irq_base + offset;
+ generic_handle_irq(real_irq);
+ }
+ }
+ }
+ }
+}
+
+static __init int s5p_gpioint_add(struct s3c_gpio_chip *chip)
+{
+ static int used_gpioint_groups = 0;
+ static bool handler_registered = 0;
+ int irq, group = chip->group;
+ int i;
+
+ if (used_gpioint_groups >= S5P_GPIOINT_GROUP_COUNT)
+ return -ENOMEM;
+
+ chip->irq_base = S5P_GPIOINT_BASE +
+ used_gpioint_groups * S5P_GPIOINT_GROUP_SIZE;
+ used_gpioint_groups++;
+
+ if (!handler_registered) {
+ set_irq_chained_handler(IRQ_GPIOINT, s5p_gpioint_handler);
+ handler_registered = 1;
+ }
+
+ irq_chips[group] = chip;
+ for (i = 0; i < chip->chip.ngpio; i++) {
+ irq = chip->irq_base + i;
+ set_irq_chip(irq, &s5p_gpioint);
+ set_irq_data(irq, &chip->chip);
+ set_irq_handler(irq, handle_level_irq);
+ set_irq_flags(irq, IRQF_VALID);
+ }
+ return 0;
+}
+
+int __init s5p_register_gpio_interrupt(int pin)
+{
+ struct s3c_gpio_chip *my_chip = s3c_gpiolib_getchip(pin);
+ int offset, group;
+ int ret;
+
+ if (!my_chip)
+ return -EINVAL;
+
+ offset = pin - my_chip->chip.base;
+ group = my_chip->group;
+
+ /* check if the group has been already registered */
+ if (my_chip->irq_base)
+ return my_chip->irq_base + offset;
+
+ /* register gpio group */
+ ret = s5p_gpioint_add(my_chip);
+ if (ret == 0) {
+ my_chip->chip.to_irq = samsung_gpiolib_to_irq;
+ printk(KERN_INFO "Registered interrupt support for gpio group %d.\n",
+ group);
+ return my_chip->irq_base + offset;
+ }
+ return ret;
+}
diff --git a/arch/arm/plat-s5p/irq-pm.c b/arch/arm/plat-s5p/irq-pm.c
new file mode 100644
index 00000000000..dc33b9ecda4
--- /dev/null
+++ b/arch/arm/plat-s5p/irq-pm.c
@@ -0,0 +1,93 @@
+/* linux/arch/arm/plat-s5p/irq-pm.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * Based on arch/arm/plat-s3c24xx/irq-pm.c,
+ * Copyright (c) 2003,2004 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ * http://armlinux.simtec.co.uk/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/sysdev.h>
+
+#include <plat/cpu.h>
+#include <plat/irqs.h>
+#include <plat/pm.h>
+#include <mach/map.h>
+
+#include <mach/regs-gpio.h>
+#include <mach/regs-irq.h>
+
+/* state for IRQs over sleep */
+
+/* default is to allow for EINT0..EINT31, and IRQ_RTC_TIC, IRQ_RTC_ALARM,
+ * as wakeup sources
+ *
+ * set bit to 1 in allow bitfield to enable the wakeup settings on it
+*/
+
+unsigned long s3c_irqwake_intallow = 0x00000006L;
+unsigned long s3c_irqwake_eintallow = 0xffffffffL;
+
+int s3c_irq_wake(unsigned int irqno, unsigned int state)
+{
+ unsigned long irqbit;
+
+ switch (irqno) {
+ case IRQ_RTC_TIC:
+ case IRQ_RTC_ALARM:
+ irqbit = 1 << (irqno + 1 - IRQ_RTC_ALARM);
+ if (!state)
+ s3c_irqwake_intmask |= irqbit;
+ else
+ s3c_irqwake_intmask &= ~irqbit;
+ break;
+ default:
+ return -ENOENT;
+ }
+ return 0;
+}
+
+static struct sleep_save eint_save[] = {
+ SAVE_ITEM(S5P_EINT_CON(0)),
+ SAVE_ITEM(S5P_EINT_CON(1)),
+ SAVE_ITEM(S5P_EINT_CON(2)),
+ SAVE_ITEM(S5P_EINT_CON(3)),
+
+ SAVE_ITEM(S5P_EINT_FLTCON(0)),
+ SAVE_ITEM(S5P_EINT_FLTCON(1)),
+ SAVE_ITEM(S5P_EINT_FLTCON(2)),
+ SAVE_ITEM(S5P_EINT_FLTCON(3)),
+ SAVE_ITEM(S5P_EINT_FLTCON(4)),
+ SAVE_ITEM(S5P_EINT_FLTCON(5)),
+ SAVE_ITEM(S5P_EINT_FLTCON(6)),
+ SAVE_ITEM(S5P_EINT_FLTCON(7)),
+
+ SAVE_ITEM(S5P_EINT_MASK(0)),
+ SAVE_ITEM(S5P_EINT_MASK(1)),
+ SAVE_ITEM(S5P_EINT_MASK(2)),
+ SAVE_ITEM(S5P_EINT_MASK(3)),
+};
+
+int s3c24xx_irq_suspend(struct sys_device *dev, pm_message_t state)
+{
+ s3c_pm_do_save(eint_save, ARRAY_SIZE(eint_save));
+
+ return 0;
+}
+
+int s3c24xx_irq_resume(struct sys_device *dev)
+{
+ s3c_pm_do_restore(eint_save, ARRAY_SIZE(eint_save));
+
+ return 0;
+}
+
diff --git a/arch/arm/plat-s5p/pm.c b/arch/arm/plat-s5p/pm.c
new file mode 100644
index 00000000000..d592b6304b4
--- /dev/null
+++ b/arch/arm/plat-s5p/pm.c
@@ -0,0 +1,52 @@
+/* linux/arch/arm/plat-s5p/pm.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * S5P Power Manager (Suspend-To-RAM) support
+ *
+ * Based on arch/arm/plat-s3c24xx/pm.c
+ * Copyright (c) 2004,2006 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/suspend.h>
+#include <plat/pm.h>
+
+#define PFX "s5p pm: "
+
+/* s3c_pm_check_resume_pin
+ *
+ * check to see if the pin is configured correctly for sleep mode, and
+ * make any necessary adjustments if it is not
+*/
+
+static void s3c_pm_check_resume_pin(unsigned int pin, unsigned int irqoffs)
+{
+ /* nothing here yet */
+}
+
+/* s3c_pm_configure_extint
+ *
+ * configure all external interrupt pins
+*/
+
+void s3c_pm_configure_extint(void)
+{
+ /* nothing here yet */
+}
+
+void s3c_pm_restore_core(void)
+{
+ /* nothing here yet */
+}
+
+void s3c_pm_save_core(void)
+{
+ /* nothing here yet */
+}
+
diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig
index 7c0bde78116..dcd6eff4ee5 100644
--- a/arch/arm/plat-samsung/Kconfig
+++ b/arch/arm/plat-samsung/Kconfig
@@ -180,6 +180,31 @@ config S3C_DEV_I2C2
help
Compile in platform device definitions for I2C channel 2
+config S3C_DEV_I2C3
+ bool
+ help
+ Compile in platform device definition for I2C controller 3
+
+config S3C_DEV_I2C4
+ bool
+ help
+ Compile in platform device definition for I2C controller 4
+
+config S3C_DEV_I2C5
+ bool
+ help
+ Compile in platform device definition for I2C controller 5
+
+config S3C_DEV_I2C6
+ bool
+ help
+ Compile in platform device definition for I2C controller 6
+
+config S3C_DEV_I2C7
+ bool
+ help
+ Compile in platform device definition for I2C controller 7
+
config S3C_DEV_FB
bool
help
diff --git a/arch/arm/plat-samsung/Makefile b/arch/arm/plat-samsung/Makefile
index 4d8ff923207..afcce474af8 100644
--- a/arch/arm/plat-samsung/Makefile
+++ b/arch/arm/plat-samsung/Makefile
@@ -40,6 +40,11 @@ obj-$(CONFIG_S3C_DEV_HWMON) += dev-hwmon.o
obj-y += dev-i2c0.o
obj-$(CONFIG_S3C_DEV_I2C1) += dev-i2c1.o
obj-$(CONFIG_S3C_DEV_I2C2) += dev-i2c2.o
+obj-$(CONFIG_S3C_DEV_I2C3) += dev-i2c3.o
+obj-$(CONFIG_S3C_DEV_I2C4) += dev-i2c4.o
+obj-$(CONFIG_S3C_DEV_I2C5) += dev-i2c5.o
+obj-$(CONFIG_S3C_DEV_I2C6) += dev-i2c6.o
+obj-$(CONFIG_S3C_DEV_I2C7) += dev-i2c7.o
obj-$(CONFIG_S3C_DEV_FB) += dev-fb.o
obj-y += dev-uart.o
obj-$(CONFIG_S3C_DEV_USB_HOST) += dev-usb.o
diff --git a/arch/arm/plat-samsung/dev-hsmmc.c b/arch/arm/plat-samsung/dev-hsmmc.c
index 9d2be094141..db7a65c7f12 100644
--- a/arch/arm/plat-samsung/dev-hsmmc.c
+++ b/arch/arm/plat-samsung/dev-hsmmc.c
@@ -41,6 +41,7 @@ struct s3c_sdhci_platdata s3c_hsmmc0_def_platdata = {
.max_width = 4,
.host_caps = (MMC_CAP_4_BIT_DATA |
MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED),
+ .clk_type = S3C_SDHCI_CLK_DIV_INTERNAL,
};
struct platform_device s3c_device_hsmmc0 = {
@@ -59,17 +60,20 @@ void s3c_sdhci0_set_platdata(struct s3c_sdhci_platdata *pd)
{
struct s3c_sdhci_platdata *set = &s3c_hsmmc0_def_platdata;
- set->max_width = pd->max_width;
set->cd_type = pd->cd_type;
set->ext_cd_init = pd->ext_cd_init;
set->ext_cd_cleanup = pd->ext_cd_cleanup;
set->ext_cd_gpio = pd->ext_cd_gpio;
set->ext_cd_gpio_invert = pd->ext_cd_gpio_invert;
+ if (pd->max_width)
+ set->max_width = pd->max_width;
if (pd->cfg_gpio)
set->cfg_gpio = pd->cfg_gpio;
if (pd->cfg_card)
set->cfg_card = pd->cfg_card;
if (pd->host_caps)
- set->host_caps = pd->host_caps;
+ set->host_caps |= pd->host_caps;
+ if (pd->clk_type)
+ set->clk_type = pd->clk_type;
}
diff --git a/arch/arm/plat-samsung/dev-hsmmc1.c b/arch/arm/plat-samsung/dev-hsmmc1.c
index a6c8295840a..2497321f08d 100644
--- a/arch/arm/plat-samsung/dev-hsmmc1.c
+++ b/arch/arm/plat-samsung/dev-hsmmc1.c
@@ -41,6 +41,7 @@ struct s3c_sdhci_platdata s3c_hsmmc1_def_platdata = {
.max_width = 4,
.host_caps = (MMC_CAP_4_BIT_DATA |
MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED),
+ .clk_type = S3C_SDHCI_CLK_DIV_INTERNAL,
};
struct platform_device s3c_device_hsmmc1 = {
@@ -59,17 +60,20 @@ void s3c_sdhci1_set_platdata(struct s3c_sdhci_platdata *pd)
{
struct s3c_sdhci_platdata *set = &s3c_hsmmc1_def_platdata;
- set->max_width = pd->max_width;
set->cd_type = pd->cd_type;
set->ext_cd_init = pd->ext_cd_init;
set->ext_cd_cleanup = pd->ext_cd_cleanup;
set->ext_cd_gpio = pd->ext_cd_gpio;
set->ext_cd_gpio_invert = pd->ext_cd_gpio_invert;
+ if (pd->max_width)
+ set->max_width = pd->max_width;
if (pd->cfg_gpio)
set->cfg_gpio = pd->cfg_gpio;
if (pd->cfg_card)
set->cfg_card = pd->cfg_card;
if (pd->host_caps)
- set->host_caps = pd->host_caps;
+ set->host_caps |= pd->host_caps;
+ if (pd->clk_type)
+ set->clk_type = pd->clk_type;
}
diff --git a/arch/arm/plat-samsung/dev-hsmmc2.c b/arch/arm/plat-samsung/dev-hsmmc2.c
index cb0d7143381..f60aedba417 100644
--- a/arch/arm/plat-samsung/dev-hsmmc2.c
+++ b/arch/arm/plat-samsung/dev-hsmmc2.c
@@ -42,6 +42,7 @@ struct s3c_sdhci_platdata s3c_hsmmc2_def_platdata = {
.max_width = 4,
.host_caps = (MMC_CAP_4_BIT_DATA |
MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED),
+ .clk_type = S3C_SDHCI_CLK_DIV_INTERNAL,
};
struct platform_device s3c_device_hsmmc2 = {
@@ -60,17 +61,20 @@ void s3c_sdhci2_set_platdata(struct s3c_sdhci_platdata *pd)
{
struct s3c_sdhci_platdata *set = &s3c_hsmmc2_def_platdata;
- set->max_width = pd->max_width;
set->cd_type = pd->cd_type;
set->ext_cd_init = pd->ext_cd_init;
set->ext_cd_cleanup = pd->ext_cd_cleanup;
set->ext_cd_gpio = pd->ext_cd_gpio;
set->ext_cd_gpio_invert = pd->ext_cd_gpio_invert;
+ if (pd->max_width)
+ set->max_width = pd->max_width;
if (pd->cfg_gpio)
set->cfg_gpio = pd->cfg_gpio;
if (pd->cfg_card)
set->cfg_card = pd->cfg_card;
if (pd->host_caps)
- set->host_caps = pd->host_caps;
+ set->host_caps |= pd->host_caps;
+ if (pd->clk_type)
+ set->clk_type = pd->clk_type;
}
diff --git a/arch/arm/plat-samsung/dev-hsmmc3.c b/arch/arm/plat-samsung/dev-hsmmc3.c
index 85aaf0f2842..ede776f20e6 100644
--- a/arch/arm/plat-samsung/dev-hsmmc3.c
+++ b/arch/arm/plat-samsung/dev-hsmmc3.c
@@ -33,8 +33,8 @@ static struct resource s3c_hsmmc3_resource[] = {
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = IRQ_MMC3,
- .end = IRQ_MMC3,
+ .start = IRQ_HSMMC3,
+ .end = IRQ_HSMMC3,
.flags = IORESOURCE_IRQ,
}
};
@@ -45,6 +45,7 @@ struct s3c_sdhci_platdata s3c_hsmmc3_def_platdata = {
.max_width = 4,
.host_caps = (MMC_CAP_4_BIT_DATA |
MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED),
+ .clk_type = S3C_SDHCI_CLK_DIV_INTERNAL,
};
struct platform_device s3c_device_hsmmc3 = {
@@ -63,15 +64,20 @@ void s3c_sdhci3_set_platdata(struct s3c_sdhci_platdata *pd)
{
struct s3c_sdhci_platdata *set = &s3c_hsmmc3_def_platdata;
- set->max_width = pd->max_width;
set->cd_type = pd->cd_type;
set->ext_cd_init = pd->ext_cd_init;
set->ext_cd_cleanup = pd->ext_cd_cleanup;
set->ext_cd_gpio = pd->ext_cd_gpio;
set->ext_cd_gpio_invert = pd->ext_cd_gpio_invert;
+ if (pd->max_width)
+ set->max_width = pd->max_width;
if (pd->cfg_gpio)
set->cfg_gpio = pd->cfg_gpio;
if (pd->cfg_card)
set->cfg_card = pd->cfg_card;
+ if (pd->host_caps)
+ set->host_caps |= pd->host_caps;
+ if (pd->clk_type)
+ set->clk_type = pd->clk_type;
}
diff --git a/arch/arm/plat-samsung/dev-i2c2.c b/arch/arm/plat-samsung/dev-i2c2.c
index 07036dee09e..ff4ba69b683 100644
--- a/arch/arm/plat-samsung/dev-i2c2.c
+++ b/arch/arm/plat-samsung/dev-i2c2.c
@@ -32,8 +32,8 @@ static struct resource s3c_i2c_resource[] = {
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = IRQ_CAN0,
- .end = IRQ_CAN0,
+ .start = IRQ_IIC2,
+ .end = IRQ_IIC2,
.flags = IORESOURCE_IRQ,
},
};
diff --git a/arch/arm/plat-samsung/dev-i2c3.c b/arch/arm/plat-samsung/dev-i2c3.c
new file mode 100644
index 00000000000..8586a10014b
--- /dev/null
+++ b/arch/arm/plat-samsung/dev-i2c3.c
@@ -0,0 +1,68 @@
+/* linux/arch/arm/plat-samsung/dev-i2c3.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * S5P series device definition for i2c device 3
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/gfp.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/platform_device.h>
+
+#include <mach/irqs.h>
+#include <mach/map.h>
+
+#include <plat/regs-iic.h>
+#include <plat/iic.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+
+static struct resource s3c_i2c_resource[] = {
+ [0] = {
+ .start = S3C_PA_IIC3,
+ .end = S3C_PA_IIC3 + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_IIC3,
+ .end = IRQ_IIC3,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device s3c_device_i2c3 = {
+ .name = "s3c2440-i2c",
+ .id = 3,
+ .num_resources = ARRAY_SIZE(s3c_i2c_resource),
+ .resource = s3c_i2c_resource,
+};
+
+static struct s3c2410_platform_i2c default_i2c_data3 __initdata = {
+ .flags = 0,
+ .bus_num = 3,
+ .slave_addr = 0x10,
+ .frequency = 100*1000,
+ .sda_delay = 100,
+};
+
+void __init s3c_i2c3_set_platdata(struct s3c2410_platform_i2c *pd)
+{
+ struct s3c2410_platform_i2c *npd;
+
+ if (!pd)
+ pd = &default_i2c_data3;
+
+ npd = kmemdup(pd, sizeof(struct s3c2410_platform_i2c), GFP_KERNEL);
+ if (!npd)
+ printk(KERN_ERR "%s: no memory for platform data\n", __func__);
+ else if (!npd->cfg_gpio)
+ npd->cfg_gpio = s3c_i2c3_cfg_gpio;
+
+ s3c_device_i2c3.dev.platform_data = npd;
+}
diff --git a/arch/arm/plat-samsung/dev-i2c4.c b/arch/arm/plat-samsung/dev-i2c4.c
new file mode 100644
index 00000000000..df2159e2daa
--- /dev/null
+++ b/arch/arm/plat-samsung/dev-i2c4.c
@@ -0,0 +1,68 @@
+/* linux/arch/arm/plat-samsung/dev-i2c4.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * S5P series device definition for i2c device 3
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/gfp.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/platform_device.h>
+
+#include <mach/irqs.h>
+#include <mach/map.h>
+
+#include <plat/regs-iic.h>
+#include <plat/iic.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+
+static struct resource s3c_i2c_resource[] = {
+ [0] = {
+ .start = S3C_PA_IIC4,
+ .end = S3C_PA_IIC4 + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_IIC4,
+ .end = IRQ_IIC4,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device s3c_device_i2c4 = {
+ .name = "s3c2440-i2c",
+ .id = 4,
+ .num_resources = ARRAY_SIZE(s3c_i2c_resource),
+ .resource = s3c_i2c_resource,
+};
+
+static struct s3c2410_platform_i2c default_i2c_data4 __initdata = {
+ .flags = 0,
+ .bus_num = 4,
+ .slave_addr = 0x10,
+ .frequency = 100*1000,
+ .sda_delay = 100,
+};
+
+void __init s3c_i2c4_set_platdata(struct s3c2410_platform_i2c *pd)
+{
+ struct s3c2410_platform_i2c *npd;
+
+ if (!pd)
+ pd = &default_i2c_data4;
+
+ npd = kmemdup(pd, sizeof(struct s3c2410_platform_i2c), GFP_KERNEL);
+ if (!npd)
+ printk(KERN_ERR "%s: no memory for platform data\n", __func__);
+ else if (!npd->cfg_gpio)
+ npd->cfg_gpio = s3c_i2c4_cfg_gpio;
+
+ s3c_device_i2c4.dev.platform_data = npd;
+}
diff --git a/arch/arm/plat-samsung/dev-i2c5.c b/arch/arm/plat-samsung/dev-i2c5.c
new file mode 100644
index 00000000000..0499c2c3877
--- /dev/null
+++ b/arch/arm/plat-samsung/dev-i2c5.c
@@ -0,0 +1,68 @@
+/* linux/arch/arm/plat-samsung/dev-i2c3.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * S5P series device definition for i2c device 3
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/gfp.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/platform_device.h>
+
+#include <mach/irqs.h>
+#include <mach/map.h>
+
+#include <plat/regs-iic.h>
+#include <plat/iic.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+
+static struct resource s3c_i2c_resource[] = {
+ [0] = {
+ .start = S3C_PA_IIC5,
+ .end = S3C_PA_IIC5 + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_IIC5,
+ .end = IRQ_IIC5,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device s3c_device_i2c5 = {
+ .name = "s3c2440-i2c",
+ .id = 5,
+ .num_resources = ARRAY_SIZE(s3c_i2c_resource),
+ .resource = s3c_i2c_resource,
+};
+
+static struct s3c2410_platform_i2c default_i2c_data5 __initdata = {
+ .flags = 0,
+ .bus_num = 5,
+ .slave_addr = 0x10,
+ .frequency = 100*1000,
+ .sda_delay = 100,
+};
+
+void __init s3c_i2c5_set_platdata(struct s3c2410_platform_i2c *pd)
+{
+ struct s3c2410_platform_i2c *npd;
+
+ if (!pd)
+ pd = &default_i2c_data5;
+
+ npd = kmemdup(pd, sizeof(struct s3c2410_platform_i2c), GFP_KERNEL);
+ if (!npd)
+ printk(KERN_ERR "%s: no memory for platform data\n", __func__);
+ else if (!npd->cfg_gpio)
+ npd->cfg_gpio = s3c_i2c5_cfg_gpio;
+
+ s3c_device_i2c5.dev.platform_data = npd;
+}
diff --git a/arch/arm/plat-samsung/dev-i2c6.c b/arch/arm/plat-samsung/dev-i2c6.c
new file mode 100644
index 00000000000..4083108908a
--- /dev/null
+++ b/arch/arm/plat-samsung/dev-i2c6.c
@@ -0,0 +1,68 @@
+/* linux/arch/arm/plat-samsung/dev-i2c6.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * S5P series device definition for i2c device 6
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/gfp.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/platform_device.h>
+
+#include <mach/irqs.h>
+#include <mach/map.h>
+
+#include <plat/regs-iic.h>
+#include <plat/iic.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+
+static struct resource s3c_i2c_resource[] = {
+ [0] = {
+ .start = S3C_PA_IIC6,
+ .end = S3C_PA_IIC6 + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_IIC6,
+ .end = IRQ_IIC6,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device s3c_device_i2c6 = {
+ .name = "s3c2440-i2c",
+ .id = 6,
+ .num_resources = ARRAY_SIZE(s3c_i2c_resource),
+ .resource = s3c_i2c_resource,
+};
+
+static struct s3c2410_platform_i2c default_i2c_data6 __initdata = {
+ .flags = 0,
+ .bus_num = 6,
+ .slave_addr = 0x10,
+ .frequency = 100*1000,
+ .sda_delay = 100,
+};
+
+void __init s3c_i2c6_set_platdata(struct s3c2410_platform_i2c *pd)
+{
+ struct s3c2410_platform_i2c *npd;
+
+ if (!pd)
+ pd = &default_i2c_data6;
+
+ npd = kmemdup(pd, sizeof(struct s3c2410_platform_i2c), GFP_KERNEL);
+ if (!npd)
+ printk(KERN_ERR "%s: no memory for platform data\n", __func__);
+ else if (!npd->cfg_gpio)
+ npd->cfg_gpio = s3c_i2c6_cfg_gpio;
+
+ s3c_device_i2c6.dev.platform_data = npd;
+}
diff --git a/arch/arm/plat-samsung/dev-i2c7.c b/arch/arm/plat-samsung/dev-i2c7.c
new file mode 100644
index 00000000000..1182451d7dc
--- /dev/null
+++ b/arch/arm/plat-samsung/dev-i2c7.c
@@ -0,0 +1,68 @@
+/* linux/arch/arm/plat-samsung/dev-i2c7.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * S5P series device definition for i2c device 7
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/gfp.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/platform_device.h>
+
+#include <mach/irqs.h>
+#include <mach/map.h>
+
+#include <plat/regs-iic.h>
+#include <plat/iic.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+
+static struct resource s3c_i2c_resource[] = {
+ [0] = {
+ .start = S3C_PA_IIC7,
+ .end = S3C_PA_IIC7 + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_IIC7,
+ .end = IRQ_IIC7,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device s3c_device_i2c7 = {
+ .name = "s3c2440-i2c",
+ .id = 7,
+ .num_resources = ARRAY_SIZE(s3c_i2c_resource),
+ .resource = s3c_i2c_resource,
+};
+
+static struct s3c2410_platform_i2c default_i2c_data7 __initdata = {
+ .flags = 0,
+ .bus_num = 7,
+ .slave_addr = 0x10,
+ .frequency = 100*1000,
+ .sda_delay = 100,
+};
+
+void __init s3c_i2c7_set_platdata(struct s3c2410_platform_i2c *pd)
+{
+ struct s3c2410_platform_i2c *npd;
+
+ if (!pd)
+ pd = &default_i2c_data7;
+
+ npd = kmemdup(pd, sizeof(struct s3c2410_platform_i2c), GFP_KERNEL);
+ if (!npd)
+ printk(KERN_ERR "%s: no memory for platform data\n", __func__);
+ else if (!npd->cfg_gpio)
+ npd->cfg_gpio = s3c_i2c7_cfg_gpio;
+
+ s3c_device_i2c7.dev.platform_data = npd;
+}
diff --git a/arch/arm/plat-samsung/gpio-config.c b/arch/arm/plat-samsung/gpio-config.c
index e3d41eaed1f..b732b773b9a 100644
--- a/arch/arm/plat-samsung/gpio-config.c
+++ b/arch/arm/plat-samsung/gpio-config.c
@@ -41,6 +41,37 @@ int s3c_gpio_cfgpin(unsigned int pin, unsigned int config)
}
EXPORT_SYMBOL(s3c_gpio_cfgpin);
+int s3c_gpio_cfgpin_range(unsigned int start, unsigned int nr,
+ unsigned int cfg)
+{
+ int ret;
+
+ for (; nr > 0; nr--, start++) {
+ ret = s3c_gpio_cfgpin(start, cfg);
+ if (ret != 0)
+ return ret;
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(s3c_gpio_cfgpin_range);
+
+int s3c_gpio_cfgall_range(unsigned int start, unsigned int nr,
+ unsigned int cfg, s3c_gpio_pull_t pull)
+{
+ int ret;
+
+ for (; nr > 0; nr--, start++) {
+ s3c_gpio_setpull(start, pull);
+ ret = s3c_gpio_cfgpin(start, cfg);
+ if (ret != 0)
+ return ret;
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(s3c_gpio_cfgall_range);
+
unsigned s3c_gpio_getcfg(unsigned int pin)
{
struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin);
@@ -80,6 +111,25 @@ int s3c_gpio_setpull(unsigned int pin, s3c_gpio_pull_t pull)
}
EXPORT_SYMBOL(s3c_gpio_setpull);
+s3c_gpio_pull_t s3c_gpio_getpull(unsigned int pin)
+{
+ struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin);
+ unsigned long flags;
+ int offset;
+ u32 pup = 0;
+
+ if (chip) {
+ offset = pin - chip->chip.base;
+
+ s3c_gpio_lock(chip, flags);
+ pup = s3c_gpio_do_getpull(chip, offset);
+ s3c_gpio_unlock(chip, flags);
+ }
+
+ return (__force s3c_gpio_pull_t)pup;
+}
+EXPORT_SYMBOL(s3c_gpio_getpull);
+
#ifdef CONFIG_S3C_GPIO_CFG_S3C24XX
int s3c_gpio_setcfg_s3c24xx_a(struct s3c_gpio_chip *chip,
unsigned int off, unsigned int cfg)
diff --git a/arch/arm/plat-samsung/gpio.c b/arch/arm/plat-samsung/gpio.c
index b83a83351ce..7743c4b8b2f 100644
--- a/arch/arm/plat-samsung/gpio.c
+++ b/arch/arm/plat-samsung/gpio.c
@@ -157,3 +157,11 @@ __init void s3c_gpiolib_add(struct s3c_gpio_chip *chip)
if (ret >= 0)
s3c_gpiolib_track(chip);
}
+
+int samsung_gpiolib_to_irq(struct gpio_chip *chip, unsigned int offset)
+{
+ struct s3c_gpio_chip *s3c_chip = container_of(chip,
+ struct s3c_gpio_chip, chip);
+
+ return s3c_chip->irq_base + offset;
+}
diff --git a/arch/arm/plat-samsung/include/plat/audio.h b/arch/arm/plat-samsung/include/plat/audio.h
index e32f9edfd4b..7712ff6336f 100644
--- a/arch/arm/plat-samsung/include/plat/audio.h
+++ b/arch/arm/plat-samsung/include/plat/audio.h
@@ -16,6 +16,15 @@
#define S3C64XX_AC97_GPE 1
extern void s3c64xx_ac97_setup_gpio(int);
+/*
+ * The machine init code calls s5p*_spdif_setup_gpio with
+ * one of these defines in order to select appropriate bank
+ * of GPIO for S/PDIF pins
+ */
+#define S5PC100_SPDIF_GPD 0
+#define S5PC100_SPDIF_GPG3 1
+extern void s5pc100_spdif_setup_gpio(int);
+
/**
* struct s3c_audio_pdata - common platform data for audio device drivers
* @cfg_gpio: Callback function to setup mux'ed pins in I2S/PCM/AC97 mode
diff --git a/arch/arm/plat-samsung/include/plat/devs.h b/arch/arm/plat-samsung/include/plat/devs.h
index c8b94279bad..2d82a6cb144 100644
--- a/arch/arm/plat-samsung/include/plat/devs.h
+++ b/arch/arm/plat-samsung/include/plat/devs.h
@@ -48,6 +48,11 @@ extern struct platform_device s3c_device_wdt;
extern struct platform_device s3c_device_i2c0;
extern struct platform_device s3c_device_i2c1;
extern struct platform_device s3c_device_i2c2;
+extern struct platform_device s3c_device_i2c3;
+extern struct platform_device s3c_device_i2c4;
+extern struct platform_device s3c_device_i2c5;
+extern struct platform_device s3c_device_i2c6;
+extern struct platform_device s3c_device_i2c7;
extern struct platform_device s3c_device_rtc;
extern struct platform_device s3c_device_adc;
extern struct platform_device s3c_device_sdi;
@@ -89,6 +94,7 @@ extern struct platform_device s5pv210_device_pcm2;
extern struct platform_device s5pv210_device_iis0;
extern struct platform_device s5pv210_device_iis1;
extern struct platform_device s5pv210_device_iis2;
+extern struct platform_device s5pv210_device_spdif;
extern struct platform_device s5p6442_device_pcm0;
extern struct platform_device s5p6442_device_pcm1;
@@ -108,6 +114,7 @@ extern struct platform_device s5pc100_device_pcm1;
extern struct platform_device s5pc100_device_iis0;
extern struct platform_device s5pc100_device_iis1;
extern struct platform_device s5pc100_device_iis2;
+extern struct platform_device s5pc100_device_spdif;
extern struct platform_device samsung_device_keypad;
diff --git a/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h b/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h
index 3e21c75feef..8fd65d8b586 100644
--- a/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h
+++ b/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h
@@ -42,6 +42,12 @@ static inline int s3c_gpio_do_setpull(struct s3c_gpio_chip *chip,
return (chip->config->set_pull)(chip, off, pull);
}
+static inline s3c_gpio_pull_t s3c_gpio_do_getpull(struct s3c_gpio_chip *chip,
+ unsigned int off)
+{
+ return chip->config->get_pull(chip, off);
+}
+
/**
* s3c_gpio_setcfg_s3c24xx - S3C24XX style GPIO configuration.
* @chip: The gpio chip that is being configured.
diff --git a/arch/arm/plat-samsung/include/plat/gpio-cfg.h b/arch/arm/plat-samsung/include/plat/gpio-cfg.h
index 1c6b92947c5..e4b5cf126fa 100644
--- a/arch/arm/plat-samsung/include/plat/gpio-cfg.h
+++ b/arch/arm/plat-samsung/include/plat/gpio-cfg.h
@@ -108,6 +108,19 @@ extern int s3c_gpio_cfgpin(unsigned int pin, unsigned int to);
*/
extern unsigned s3c_gpio_getcfg(unsigned int pin);
+/**
+ * s3c_gpio_cfgpin_range() - Change the GPIO function for configuring pin range
+ * @start: The pin number to start at
+ * @nr: The number of pins to configure from @start.
+ * @cfg: The configuration for the pin's function
+ *
+ * Call s3c_gpio_cfgpin() for the @nr pins starting at @start.
+ *
+ * @sa s3c_gpio_cfgpin.
+ */
+extern int s3c_gpio_cfgpin_range(unsigned int start, unsigned int nr,
+ unsigned int cfg);
+
/* Define values for the pull-{up,down} available for each gpio pin.
*
* These values control the state of the weak pull-{up,down} resistors
@@ -140,6 +153,31 @@ extern int s3c_gpio_setpull(unsigned int pin, s3c_gpio_pull_t pull);
*/
extern s3c_gpio_pull_t s3c_gpio_getpull(unsigned int pin);
+/* configure `all` aspects of an gpio */
+
+/**
+ * s3c_gpio_cfgall_range() - configure range of gpio functtion and pull.
+ * @start: The gpio number to start at.
+ * @nr: The number of gpio to configure from @start.
+ * @cfg: The configuration to use
+ * @pull: The pull setting to use.
+ *
+ * Run s3c_gpio_cfgpin() and s3c_gpio_setpull() over the gpio range starting
+ * @gpio and running for @size.
+ *
+ * @sa s3c_gpio_cfgpin
+ * @sa s3c_gpio_setpull
+ * @sa s3c_gpio_cfgpin_range
+ */
+extern int s3c_gpio_cfgall_range(unsigned int start, unsigned int nr,
+ unsigned int cfg, s3c_gpio_pull_t pull);
+
+static inline int s3c_gpio_cfgrange_nopull(unsigned int pin, unsigned int size,
+ unsigned int cfg)
+{
+ return s3c_gpio_cfgall_range(pin, size, cfg, S3C_GPIO_PULL_NONE);
+}
+
/* Define values for the drvstr available for each gpio pin.
*
* These values control the value of the output signal driver strength,
@@ -169,4 +207,22 @@ extern s5p_gpio_drvstr_t s5p_gpio_get_drvstr(unsigned int pin);
*/
extern int s5p_gpio_set_drvstr(unsigned int pin, s5p_gpio_drvstr_t drvstr);
+/**
+ * s5p_register_gpio_interrupt() - register interrupt support for a gpio group
+ * @pin: The pin number from the group to be registered
+ *
+ * This function registers gpio interrupt support for the group that the
+ * specified pin belongs to.
+ *
+ * The total number of gpio pins is quite large ob s5p series. Registering
+ * irq support for all of them would be a resource waste. Because of that the
+ * interrupt support for standard gpio pins is registered dynamically.
+ *
+ * It will return the irq number of the interrupt that has been registered
+ * or -ENOMEM if no more gpio interrupts can be registered. It is allowed
+ * to call this function more than once for the same gpio group (the group
+ * will be registered only once).
+ */
+extern int s5p_register_gpio_interrupt(int pin);
+
#endif /* __PLAT_GPIO_CFG_H */
diff --git a/arch/arm/plat-samsung/include/plat/gpio-core.h b/arch/arm/plat-samsung/include/plat/gpio-core.h
index e358c7da848..13a22b8861e 100644
--- a/arch/arm/plat-samsung/include/plat/gpio-core.h
+++ b/arch/arm/plat-samsung/include/plat/gpio-core.h
@@ -43,6 +43,8 @@ struct s3c_gpio_cfg;
* struct s3c_gpio_chip - wrapper for specific implementation of gpio
* @chip: The chip structure to be exported via gpiolib.
* @base: The base pointer to the gpio configuration registers.
+ * @group: The group register number for gpio interrupt support.
+ * @irq_base: The base irq number.
* @config: special function and pull-resistor control information.
* @lock: Lock for exclusive access to this gpio bank.
* @pm_save: Save information for suspend/resume support.
@@ -63,6 +65,8 @@ struct s3c_gpio_chip {
struct s3c_gpio_cfg *config;
struct s3c_gpio_pm *pm;
void __iomem *base;
+ int irq_base;
+ int group;
spinlock_t lock;
#ifdef CONFIG_PM
u32 pm_save[4];
@@ -118,6 +122,17 @@ extern void samsung_gpiolib_add_4bit2_chips(struct s3c_gpio_chip *chip,
extern void samsung_gpiolib_add_4bit(struct s3c_gpio_chip *chip);
extern void samsung_gpiolib_add_4bit2(struct s3c_gpio_chip *chip);
+
+/**
+ * samsung_gpiolib_to_irq - convert gpio pin to irq number
+ * @chip: The gpio chip that the pin belongs to.
+ * @offset: The offset of the pin in the chip.
+ *
+ * This helper returns the irq number calculated from the chip->irq_base and
+ * the provided offset.
+ */
+extern int samsung_gpiolib_to_irq(struct gpio_chip *chip, unsigned int offset);
+
/* exported for core SoC support to change */
extern struct s3c_gpio_cfg s3c24xx_gpiocfg_default;
diff --git a/arch/arm/plat-samsung/include/plat/iic.h b/arch/arm/plat-samsung/include/plat/iic.h
index 133308bf595..1543da8f85c 100644
--- a/arch/arm/plat-samsung/include/plat/iic.h
+++ b/arch/arm/plat-samsung/include/plat/iic.h
@@ -55,10 +55,20 @@ struct s3c2410_platform_i2c {
extern void s3c_i2c0_set_platdata(struct s3c2410_platform_i2c *i2c);
extern void s3c_i2c1_set_platdata(struct s3c2410_platform_i2c *i2c);
extern void s3c_i2c2_set_platdata(struct s3c2410_platform_i2c *i2c);
+extern void s3c_i2c3_set_platdata(struct s3c2410_platform_i2c *i2c);
+extern void s3c_i2c4_set_platdata(struct s3c2410_platform_i2c *i2c);
+extern void s3c_i2c5_set_platdata(struct s3c2410_platform_i2c *i2c);
+extern void s3c_i2c6_set_platdata(struct s3c2410_platform_i2c *i2c);
+extern void s3c_i2c7_set_platdata(struct s3c2410_platform_i2c *i2c);
/* defined by architecture to configure gpio */
extern void s3c_i2c0_cfg_gpio(struct platform_device *dev);
extern void s3c_i2c1_cfg_gpio(struct platform_device *dev);
extern void s3c_i2c2_cfg_gpio(struct platform_device *dev);
+extern void s3c_i2c3_cfg_gpio(struct platform_device *dev);
+extern void s3c_i2c4_cfg_gpio(struct platform_device *dev);
+extern void s3c_i2c5_cfg_gpio(struct platform_device *dev);
+extern void s3c_i2c6_cfg_gpio(struct platform_device *dev);
+extern void s3c_i2c7_cfg_gpio(struct platform_device *dev);
#endif /* __ASM_ARCH_IIC_H */
diff --git a/arch/arm/plat-samsung/include/plat/map-base.h b/arch/arm/plat-samsung/include/plat/map-base.h
index 250be311c85..3ffac4d2e4f 100644
--- a/arch/arm/plat-samsung/include/plat/map-base.h
+++ b/arch/arm/plat-samsung/include/plat/map-base.h
@@ -14,7 +14,7 @@
#ifndef __ASM_PLAT_MAP_H
#define __ASM_PLAT_MAP_H __FILE__
-/* Fit all our registers in at 0xF4000000 upwards, trying to use as
+/* Fit all our registers in at 0xF6000000 upwards, trying to use as
* little of the VA space as possible so vmalloc and friends have a
* better chance of getting memory.
*
@@ -22,7 +22,7 @@
* an single MOVS instruction (ie, only 8 bits of set data)
*/
-#define S3C_ADDR_BASE (0xF4000000)
+#define S3C_ADDR_BASE 0xF6000000
#ifndef __ASSEMBLY__
#define S3C_ADDR(x) ((void __iomem __force *)S3C_ADDR_BASE + (x))
diff --git a/arch/arm/plat-samsung/include/plat/nand-core.h b/arch/arm/plat-samsung/include/plat/nand-core.h
new file mode 100644
index 00000000000..6de20789a95
--- /dev/null
+++ b/arch/arm/plat-samsung/include/plat/nand-core.h
@@ -0,0 +1,28 @@
+/* arch/arm/plat-samsung/include/plat/nand-core.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * S3C - Nand Controller core functions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_NAND_CORE_H
+#define __ASM_ARCH_NAND_CORE_H __FILE__
+
+/* These functions are only for use with the core support code, such as
+ * the cpu specific initialisation code
+ */
+
+/* re-define device name depending on support. */
+static inline void s3c_nand_setname(char *name)
+{
+#ifdef CONFIG_S3C_DEV_NAND
+ s3c_device_nand.name = name;
+#endif
+}
+
+#endif /* __ASM_ARCH_NAND_CORE_H */
diff --git a/arch/arm/plat-samsung/include/plat/sdhci.h b/arch/arm/plat-samsung/include/plat/sdhci.h
index 30844c263d0..85853f8c4c5 100644
--- a/arch/arm/plat-samsung/include/plat/sdhci.h
+++ b/arch/arm/plat-samsung/include/plat/sdhci.h
@@ -28,11 +28,17 @@ enum cd_types {
S3C_SDHCI_CD_PERMANENT, /* no CD line, card permanently wired to host */
};
+enum clk_types {
+ S3C_SDHCI_CLK_DIV_INTERNAL, /* use mmc internal clock divider */
+ S3C_SDHCI_CLK_DIV_EXTERNAL, /* use external clock divider */
+};
+
/**
* struct s3c_sdhci_platdata() - Platform device data for Samsung SDHCI
* @max_width: The maximum number of data bits supported.
* @host_caps: Standard MMC host capabilities bit field.
* @cd_type: Type of Card Detection method (see cd_types enum above)
+ * @clk_type: Type of clock divider method (see clk_types enum above)
* @ext_cd_init: Initialize external card detect subsystem. Called on
* sdhci-s3c driver probe when cd_type == S3C_SDHCI_CD_EXTERNAL.
* notify_func argument is a callback to the sdhci-s3c driver
@@ -59,6 +65,7 @@ struct s3c_sdhci_platdata {
unsigned int max_width;
unsigned int host_caps;
enum cd_types cd_type;
+ enum clk_types clk_type;
char **clocks; /* set of clock sources */
@@ -110,6 +117,10 @@ extern void s5pv210_setup_sdhci0_cfg_gpio(struct platform_device *, int w);
extern void s5pv210_setup_sdhci1_cfg_gpio(struct platform_device *, int w);
extern void s5pv210_setup_sdhci2_cfg_gpio(struct platform_device *, int w);
extern void s5pv210_setup_sdhci3_cfg_gpio(struct platform_device *, int w);
+extern void s5pv310_setup_sdhci0_cfg_gpio(struct platform_device *, int w);
+extern void s5pv310_setup_sdhci1_cfg_gpio(struct platform_device *, int w);
+extern void s5pv310_setup_sdhci2_cfg_gpio(struct platform_device *, int w);
+extern void s5pv310_setup_sdhci3_cfg_gpio(struct platform_device *, int w);
/* S3C64XX SDHCI setup */
@@ -288,4 +299,57 @@ static inline void s5pv210_default_sdhci3(void) { }
#endif /* CONFIG_S5PV210_SETUP_SDHCI */
+/* S5PV310 SDHCI setup */
+#ifdef CONFIG_S5PV310_SETUP_SDHCI
+extern char *s5pv310_hsmmc_clksrcs[4];
+
+extern void s5pv310_setup_sdhci_cfg_card(struct platform_device *dev,
+ void __iomem *r,
+ struct mmc_ios *ios,
+ struct mmc_card *card);
+
+static inline void s5pv310_default_sdhci0(void)
+{
+#ifdef CONFIG_S3C_DEV_HSMMC
+ s3c_hsmmc0_def_platdata.clocks = s5pv310_hsmmc_clksrcs;
+ s3c_hsmmc0_def_platdata.cfg_gpio = s5pv310_setup_sdhci0_cfg_gpio;
+ s3c_hsmmc0_def_platdata.cfg_card = s5pv310_setup_sdhci_cfg_card;
+#endif
+}
+
+static inline void s5pv310_default_sdhci1(void)
+{
+#ifdef CONFIG_S3C_DEV_HSMMC1
+ s3c_hsmmc1_def_platdata.clocks = s5pv310_hsmmc_clksrcs;
+ s3c_hsmmc1_def_platdata.cfg_gpio = s5pv310_setup_sdhci1_cfg_gpio;
+ s3c_hsmmc1_def_platdata.cfg_card = s5pv310_setup_sdhci_cfg_card;
+#endif
+}
+
+static inline void s5pv310_default_sdhci2(void)
+{
+#ifdef CONFIG_S3C_DEV_HSMMC2
+ s3c_hsmmc2_def_platdata.clocks = s5pv310_hsmmc_clksrcs;
+ s3c_hsmmc2_def_platdata.cfg_gpio = s5pv310_setup_sdhci2_cfg_gpio;
+ s3c_hsmmc2_def_platdata.cfg_card = s5pv310_setup_sdhci_cfg_card;
+#endif
+}
+
+static inline void s5pv310_default_sdhci3(void)
+{
+#ifdef CONFIG_S3C_DEV_HSMMC3
+ s3c_hsmmc3_def_platdata.clocks = s5pv310_hsmmc_clksrcs;
+ s3c_hsmmc3_def_platdata.cfg_gpio = s5pv310_setup_sdhci3_cfg_gpio;
+ s3c_hsmmc3_def_platdata.cfg_card = s5pv310_setup_sdhci_cfg_card;
+#endif
+}
+
+#else
+static inline void s5pv310_default_sdhci0(void) { }
+static inline void s5pv310_default_sdhci1(void) { }
+static inline void s5pv310_default_sdhci2(void) { }
+static inline void s5pv310_default_sdhci3(void) { }
+
+#endif /* CONFIG_S5PV310_SETUP_SDHCI */
+
#endif /* __PLAT_S3C_SDHCI_H */
diff --git a/arch/arm/plat-samsung/pm-gpio.c b/arch/arm/plat-samsung/pm-gpio.c
index 7df03f87fbf..96528200eb7 100644
--- a/arch/arm/plat-samsung/pm-gpio.c
+++ b/arch/arm/plat-samsung/pm-gpio.c
@@ -192,7 +192,7 @@ struct s3c_gpio_pm s3c_gpio_pm_2bit = {
.resume = s3c_gpio_pm_2bit_resume,
};
-#ifdef CONFIG_ARCH_S3C64XX
+#if defined(CONFIG_ARCH_S3C64XX) || defined(CONFIG_PLAT_S5P)
static void s3c_gpio_pm_4bit_save(struct s3c_gpio_chip *chip)
{
chip->pm_save[1] = __raw_readl(chip->base + OFFS_CON);
@@ -302,7 +302,7 @@ struct s3c_gpio_pm s3c_gpio_pm_4bit = {
.save = s3c_gpio_pm_4bit_save,
.resume = s3c_gpio_pm_4bit_resume,
};
-#endif /* CONFIG_ARCH_S3C64XX */
+#endif /* CONFIG_ARCH_S3C64XX || CONFIG_PLAT_S5P */
/**
* s3c_pm_save_gpio() - save gpio chip data for suspend
diff --git a/arch/arm/plat-samsung/s3c-pl330.c b/arch/arm/plat-samsung/s3c-pl330.c
index a91305a60ae..b4ff8d74ac4 100644
--- a/arch/arm/plat-samsung/s3c-pl330.c
+++ b/arch/arm/plat-samsung/s3c-pl330.c
@@ -15,6 +15,8 @@
#include <linux/io.h>
#include <linux/slab.h>
#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/err.h>
#include <asm/hardware/pl330.h>
@@ -27,6 +29,7 @@
* @node: To attach to the global list of DMACs.
* @pi: PL330 configuration info for the DMAC.
* @kmcache: Pool to quickly allocate xfers for all channels in the dmac.
+ * @clk: Pointer of DMAC operation clock.
*/
struct s3c_pl330_dmac {
unsigned busy_chan;
@@ -34,6 +37,7 @@ struct s3c_pl330_dmac {
struct list_head node;
struct pl330_info *pi;
struct kmem_cache *kmcache;
+ struct clk *clk;
};
/**
@@ -1072,16 +1076,25 @@ static int pl330_probe(struct platform_device *pdev)
if (ret)
goto probe_err4;
- ret = pl330_add(pl330_info);
- if (ret)
- goto probe_err5;
-
/* Allocate a new DMAC */
s3c_pl330_dmac = kmalloc(sizeof(*s3c_pl330_dmac), GFP_KERNEL);
if (!s3c_pl330_dmac) {
ret = -ENOMEM;
+ goto probe_err5;
+ }
+
+ /* Get operation clock and enable it */
+ s3c_pl330_dmac->clk = clk_get(&pdev->dev, "pdma");
+ if (IS_ERR(s3c_pl330_dmac->clk)) {
+ dev_err(&pdev->dev, "Cannot get operation clock.\n");
+ ret = -EINVAL;
goto probe_err6;
}
+ clk_enable(s3c_pl330_dmac->clk);
+
+ ret = pl330_add(pl330_info);
+ if (ret)
+ goto probe_err7;
/* Hook the info */
s3c_pl330_dmac->pi = pl330_info;
@@ -1094,7 +1107,7 @@ static int pl330_probe(struct platform_device *pdev)
if (!s3c_pl330_dmac->kmcache) {
ret = -ENOMEM;
- goto probe_err7;
+ goto probe_err8;
}
/* Get the list of peripherals */
@@ -1120,10 +1133,13 @@ static int pl330_probe(struct platform_device *pdev)
return 0;
+probe_err8:
+ pl330_del(pl330_info);
probe_err7:
- kfree(s3c_pl330_dmac);
+ clk_disable(s3c_pl330_dmac->clk);
+ clk_put(s3c_pl330_dmac->clk);
probe_err6:
- pl330_del(pl330_info);
+ kfree(s3c_pl330_dmac);
probe_err5:
free_irq(irq, pl330_info);
probe_err4:
@@ -1188,6 +1204,10 @@ static int pl330_remove(struct platform_device *pdev)
}
}
+ /* Disable operation clock */
+ clk_disable(dmac->clk);
+ clk_put(dmac->clk);
+
/* Remove the DMAC */
list_del(&dmac->node);
kfree(dmac);
diff --git a/arch/mips/include/asm/mach-bcm63xx/bcm963xx_tag.h b/arch/mips/include/asm/mach-bcm63xx/bcm963xx_tag.h
new file mode 100644
index 00000000000..5325084d5c4
--- /dev/null
+++ b/arch/mips/include/asm/mach-bcm63xx/bcm963xx_tag.h
@@ -0,0 +1,97 @@
+#ifndef __BCM963XX_TAG_H
+#define __BCM963XX_TAG_H
+
+#define TAGVER_LEN 4 /* Length of Tag Version */
+#define TAGLAYOUT_LEN 4 /* Length of FlashLayoutVer */
+#define SIG1_LEN 20 /* Company Signature 1 Length */
+#define SIG2_LEN 14 /* Company Signature 2 Lenght */
+#define BOARDID_LEN 16 /* Length of BoardId */
+#define ENDIANFLAG_LEN 2 /* Endian Flag Length */
+#define CHIPID_LEN 6 /* Chip Id Length */
+#define IMAGE_LEN 10 /* Length of Length Field */
+#define ADDRESS_LEN 12 /* Length of Address field */
+#define DUALFLAG_LEN 2 /* Dual Image flag Length */
+#define INACTIVEFLAG_LEN 2 /* Inactie Flag Length */
+#define RSASIG_LEN 20 /* Length of RSA Signature in tag */
+#define TAGINFO1_LEN 30 /* Length of vendor information field1 in tag */
+#define FLASHLAYOUTVER_LEN 4 /* Length of Flash Layout Version String tag */
+#define TAGINFO2_LEN 16 /* Length of vendor information field2 in tag */
+#define CRC_LEN 4 /* Length of CRC in bytes */
+#define ALTTAGINFO_LEN 54 /* Alternate length for vendor information; Pirelli */
+
+#define NUM_PIRELLI 2
+#define IMAGETAG_CRC_START 0xFFFFFFFF
+
+#define PIRELLI_BOARDS { \
+ "AGPF-S0", \
+ "DWV-S0", \
+}
+
+/*
+ * The broadcom firmware assumes the rootfs starts the image,
+ * therefore uses the rootfs start (flash_image_address)
+ * to determine where to flash the image. Since we have the kernel first
+ * we have to give it the kernel address, but the crc uses the length
+ * associated with this address (root_length), which is added to the kernel
+ * length (kernel_length) to determine the length of image to flash and thus
+ * needs to be rootfs + deadcode (jffs2 EOF marker)
+*/
+
+struct bcm_tag {
+ /* 0-3: Version of the image tag */
+ char tag_version[TAGVER_LEN];
+ /* 4-23: Company Line 1 */
+ char sig_1[SIG1_LEN];
+ /* 24-37: Company Line 2 */
+ char sig_2[SIG2_LEN];
+ /* 38-43: Chip this image is for */
+ char chip_id[CHIPID_LEN];
+ /* 44-59: Board name */
+ char board_id[BOARDID_LEN];
+ /* 60-61: Map endianness -- 1 BE 0 LE */
+ char big_endian[ENDIANFLAG_LEN];
+ /* 62-71: Total length of image */
+ char total_length[IMAGE_LEN];
+ /* 72-83: Address in memory of CFE */
+ char cfe__address[ADDRESS_LEN];
+ /* 84-93: Size of CFE */
+ char cfe_length[IMAGE_LEN];
+ /* 94-105: Address in memory of image start
+ * (kernel for OpenWRT, rootfs for stock firmware)
+ */
+ char flash_image_start[ADDRESS_LEN];
+ /* 106-115: Size of rootfs */
+ char root_length[IMAGE_LEN];
+ /* 116-127: Address in memory of kernel */
+ char kernel_address[ADDRESS_LEN];
+ /* 128-137: Size of kernel */
+ char kernel_length[IMAGE_LEN];
+ /* 138-139: Unused at the moment */
+ char dual_image[DUALFLAG_LEN];
+ /* 140-141: Unused at the moment */
+ char inactive_flag[INACTIVEFLAG_LEN];
+ /* 142-161: RSA Signature (not used; some vendors may use this) */
+ char rsa_signature[RSASIG_LEN];
+ /* 162-191: Compilation and related information (not used in OpenWrt) */
+ char information1[TAGINFO1_LEN];
+ /* 192-195: Version flash layout */
+ char flash_layout_ver[FLASHLAYOUTVER_LEN];
+ /* 196-199: kernel+rootfs CRC32 */
+ char fskernel_crc[CRC_LEN];
+ /* 200-215: Unused except on Alice Gate where is is information */
+ char information2[TAGINFO2_LEN];
+ /* 216-219: CRC32 of image less imagetag (kernel for Alice Gate) */
+ char image_crc[CRC_LEN];
+ /* 220-223: CRC32 of rootfs partition */
+ char rootfs_crc[CRC_LEN];
+ /* 224-227: CRC32 of kernel partition */
+ char kernel_crc[CRC_LEN];
+ /* 228-235: Unused at present */
+ char reserved1[8];
+ /* 236-239: CRC32 of header excluding tagVersion */
+ char header_crc[CRC_LEN];
+ /* 240-255: Unused at present */
+ char reserved2[16];
+};
+
+#endif /* __BCM63XX_TAG_H */
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index c7e40b37aa6..b6447190e1a 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -682,9 +682,12 @@ config 4xx_SOC
bool
config FSL_LBC
- bool
+ bool "Freescale Local Bus support"
+ depends on FSL_SOC
help
- Freescale Localbus support
+ Enables reporting of errors from the Freescale local bus
+ controller. Also contains some common code used by
+ drivers for specific local bus peripherals.
config FSL_GTM
bool
diff --git a/arch/powerpc/include/asm/fsl_lbc.h b/arch/powerpc/include/asm/fsl_lbc.h
index 1b5a21041f9..5c1bf346674 100644
--- a/arch/powerpc/include/asm/fsl_lbc.h
+++ b/arch/powerpc/include/asm/fsl_lbc.h
@@ -1,9 +1,10 @@
/* Freescale Local Bus Controller
*
- * Copyright (c) 2006-2007 Freescale Semiconductor
+ * Copyright © 2006-2007, 2010 Freescale Semiconductor
*
* Authors: Nick Spence <nick.spence@freescale.com>,
* Scott Wood <scottwood@freescale.com>
+ * Jack Lan <jack.lan@freescale.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -26,6 +27,8 @@
#include <linux/compiler.h>
#include <linux/types.h>
#include <linux/io.h>
+#include <linux/device.h>
+#include <linux/spinlock.h>
struct fsl_lbc_bank {
__be32 br; /**< Base Register */
@@ -125,13 +128,23 @@ struct fsl_lbc_regs {
#define LTESR_ATMW 0x00800000
#define LTESR_ATMR 0x00400000
#define LTESR_CS 0x00080000
+#define LTESR_UPM 0x00000002
#define LTESR_CC 0x00000001
#define LTESR_NAND_MASK (LTESR_FCT | LTESR_PAR | LTESR_CC)
+#define LTESR_MASK (LTESR_BM | LTESR_FCT | LTESR_PAR | LTESR_WP \
+ | LTESR_ATMW | LTESR_ATMR | LTESR_CS | LTESR_UPM \
+ | LTESR_CC)
+#define LTESR_CLEAR 0xFFFFFFFF
+#define LTECCR_CLEAR 0xFFFFFFFF
+#define LTESR_STATUS LTESR_MASK
+#define LTEIR_ENABLE LTESR_MASK
+#define LTEDR_ENABLE 0x00000000
__be32 ltedr; /**< Transfer Error Disable Register */
__be32 lteir; /**< Transfer Error Interrupt Register */
__be32 lteatr; /**< Transfer Error Attributes Register */
__be32 ltear; /**< Transfer Error Address Register */
- u8 res6[0xC];
+ __be32 lteccr; /**< Transfer Error ECC Register */
+ u8 res6[0x8];
__be32 lbcr; /**< Configuration Register */
#define LBCR_LDIS 0x80000000
#define LBCR_LDIS_SHIFT 31
@@ -235,6 +248,7 @@ struct fsl_upm {
int width;
};
+extern u32 fsl_lbc_addr(phys_addr_t addr_base);
extern int fsl_lbc_find(phys_addr_t addr_base);
extern int fsl_upm_find(phys_addr_t addr_base, struct fsl_upm *upm);
@@ -265,7 +279,23 @@ static inline void fsl_upm_end_pattern(struct fsl_upm *upm)
cpu_relax();
}
+/* overview of the fsl lbc controller */
+
+struct fsl_lbc_ctrl {
+ /* device info */
+ struct device *dev;
+ struct fsl_lbc_regs __iomem *regs;
+ int irq;
+ wait_queue_head_t irq_wait;
+ spinlock_t lock;
+ void *nand;
+
+ /* status read from LTESR by irq handler */
+ unsigned int irq_status;
+};
+
extern int fsl_upm_run_pattern(struct fsl_upm *upm, void __iomem *io_base,
u32 mar);
+extern struct fsl_lbc_ctrl *fsl_lbc_ctrl_dev;
#endif /* __ASM_FSL_LBC_H */
diff --git a/arch/powerpc/sysdev/fsl_lbc.c b/arch/powerpc/sysdev/fsl_lbc.c
index dceb8d1a843..4fcb5a4e60d 100644
--- a/arch/powerpc/sysdev/fsl_lbc.c
+++ b/arch/powerpc/sysdev/fsl_lbc.c
@@ -1,9 +1,12 @@
/*
* Freescale LBC and UPM routines.
*
- * Copyright (c) 2007-2008 MontaVista Software, Inc.
+ * Copyright © 2007-2008 MontaVista Software, Inc.
+ * Copyright © 2010 Freescale Semiconductor
*
* Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+ * Author: Jack Lan <Jack.Lan@freescale.com>
+ * Author: Roy Zang <tie-fei.zang@freescale.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -19,39 +22,37 @@
#include <linux/types.h>
#include <linux/io.h>
#include <linux/of.h>
+#include <linux/slab.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/mod_devicetable.h>
#include <asm/prom.h>
#include <asm/fsl_lbc.h>
static spinlock_t fsl_lbc_lock = __SPIN_LOCK_UNLOCKED(fsl_lbc_lock);
-static struct fsl_lbc_regs __iomem *fsl_lbc_regs;
+struct fsl_lbc_ctrl *fsl_lbc_ctrl_dev;
+EXPORT_SYMBOL(fsl_lbc_ctrl_dev);
-static char __initdata *compat_lbc[] = {
- "fsl,pq2-localbus",
- "fsl,pq2pro-localbus",
- "fsl,pq3-localbus",
- "fsl,elbc",
-};
-
-static int __init fsl_lbc_init(void)
+/**
+ * fsl_lbc_addr - convert the base address
+ * @addr_base: base address of the memory bank
+ *
+ * This function converts a base address of lbc into the right format for the
+ * BR register. If the SOC has eLBC then it returns 32bit physical address
+ * else it convers a 34bit local bus physical address to correct format of
+ * 32bit address for BR register (Example: MPC8641).
+ */
+u32 fsl_lbc_addr(phys_addr_t addr_base)
{
- struct device_node *lbus;
- int i;
+ struct device_node *np = fsl_lbc_ctrl_dev->dev->of_node;
+ u32 addr = addr_base & 0xffff8000;
- for (i = 0; i < ARRAY_SIZE(compat_lbc); i++) {
- lbus = of_find_compatible_node(NULL, NULL, compat_lbc[i]);
- if (lbus)
- goto found;
- }
- return -ENODEV;
+ if (of_device_is_compatible(np, "fsl,elbc"))
+ return addr;
-found:
- fsl_lbc_regs = of_iomap(lbus, 0);
- of_node_put(lbus);
- if (!fsl_lbc_regs)
- return -ENOMEM;
- return 0;
+ return addr | ((addr_base & 0x300000000ull) >> 19);
}
-arch_initcall(fsl_lbc_init);
+EXPORT_SYMBOL(fsl_lbc_addr);
/**
* fsl_lbc_find - find Localbus bank
@@ -65,15 +66,17 @@ arch_initcall(fsl_lbc_init);
int fsl_lbc_find(phys_addr_t addr_base)
{
int i;
+ struct fsl_lbc_regs __iomem *lbc;
- if (!fsl_lbc_regs)
+ if (!fsl_lbc_ctrl_dev || !fsl_lbc_ctrl_dev->regs)
return -ENODEV;
- for (i = 0; i < ARRAY_SIZE(fsl_lbc_regs->bank); i++) {
- __be32 br = in_be32(&fsl_lbc_regs->bank[i].br);
- __be32 or = in_be32(&fsl_lbc_regs->bank[i].or);
+ lbc = fsl_lbc_ctrl_dev->regs;
+ for (i = 0; i < ARRAY_SIZE(lbc->bank); i++) {
+ __be32 br = in_be32(&lbc->bank[i].br);
+ __be32 or = in_be32(&lbc->bank[i].or);
- if (br & BR_V && (br & or & BR_BA) == addr_base)
+ if (br & BR_V && (br & or & BR_BA) == fsl_lbc_addr(addr_base))
return i;
}
@@ -94,22 +97,27 @@ int fsl_upm_find(phys_addr_t addr_base, struct fsl_upm *upm)
{
int bank;
__be32 br;
+ struct fsl_lbc_regs __iomem *lbc;
bank = fsl_lbc_find(addr_base);
if (bank < 0)
return bank;
- br = in_be32(&fsl_lbc_regs->bank[bank].br);
+ if (!fsl_lbc_ctrl_dev || !fsl_lbc_ctrl_dev->regs)
+ return -ENODEV;
+
+ lbc = fsl_lbc_ctrl_dev->regs;
+ br = in_be32(&lbc->bank[bank].br);
switch (br & BR_MSEL) {
case BR_MS_UPMA:
- upm->mxmr = &fsl_lbc_regs->mamr;
+ upm->mxmr = &lbc->mamr;
break;
case BR_MS_UPMB:
- upm->mxmr = &fsl_lbc_regs->mbmr;
+ upm->mxmr = &lbc->mbmr;
break;
case BR_MS_UPMC:
- upm->mxmr = &fsl_lbc_regs->mcmr;
+ upm->mxmr = &lbc->mcmr;
break;
default:
return -EINVAL;
@@ -148,9 +156,12 @@ int fsl_upm_run_pattern(struct fsl_upm *upm, void __iomem *io_base, u32 mar)
int ret = 0;
unsigned long flags;
+ if (!fsl_lbc_ctrl_dev || !fsl_lbc_ctrl_dev->regs)
+ return -ENODEV;
+
spin_lock_irqsave(&fsl_lbc_lock, flags);
- out_be32(&fsl_lbc_regs->mar, mar);
+ out_be32(&fsl_lbc_ctrl_dev->regs->mar, mar);
switch (upm->width) {
case 8:
@@ -172,3 +183,166 @@ int fsl_upm_run_pattern(struct fsl_upm *upm, void __iomem *io_base, u32 mar)
return ret;
}
EXPORT_SYMBOL(fsl_upm_run_pattern);
+
+static int __devinit fsl_lbc_ctrl_init(struct fsl_lbc_ctrl *ctrl)
+{
+ struct fsl_lbc_regs __iomem *lbc = ctrl->regs;
+
+ /* clear event registers */
+ setbits32(&lbc->ltesr, LTESR_CLEAR);
+ out_be32(&lbc->lteatr, 0);
+ out_be32(&lbc->ltear, 0);
+ out_be32(&lbc->lteccr, LTECCR_CLEAR);
+ out_be32(&lbc->ltedr, LTEDR_ENABLE);
+
+ /* Enable interrupts for any detected events */
+ out_be32(&lbc->lteir, LTEIR_ENABLE);
+
+ return 0;
+}
+
+/*
+ * NOTE: This interrupt is used to report localbus events of various kinds,
+ * such as transaction errors on the chipselects.
+ */
+
+static irqreturn_t fsl_lbc_ctrl_irq(int irqno, void *data)
+{
+ struct fsl_lbc_ctrl *ctrl = data;
+ struct fsl_lbc_regs __iomem *lbc = ctrl->regs;
+ u32 status;
+
+ status = in_be32(&lbc->ltesr);
+ if (!status)
+ return IRQ_NONE;
+
+ out_be32(&lbc->ltesr, LTESR_CLEAR);
+ out_be32(&lbc->lteatr, 0);
+ out_be32(&lbc->ltear, 0);
+ ctrl->irq_status = status;
+
+ if (status & LTESR_BM)
+ dev_err(ctrl->dev, "Local bus monitor time-out: "
+ "LTESR 0x%08X\n", status);
+ if (status & LTESR_WP)
+ dev_err(ctrl->dev, "Write protect error: "
+ "LTESR 0x%08X\n", status);
+ if (status & LTESR_ATMW)
+ dev_err(ctrl->dev, "Atomic write error: "
+ "LTESR 0x%08X\n", status);
+ if (status & LTESR_ATMR)
+ dev_err(ctrl->dev, "Atomic read error: "
+ "LTESR 0x%08X\n", status);
+ if (status & LTESR_CS)
+ dev_err(ctrl->dev, "Chip select error: "
+ "LTESR 0x%08X\n", status);
+ if (status & LTESR_UPM)
+ ;
+ if (status & LTESR_FCT) {
+ dev_err(ctrl->dev, "FCM command time-out: "
+ "LTESR 0x%08X\n", status);
+ smp_wmb();
+ wake_up(&ctrl->irq_wait);
+ }
+ if (status & LTESR_PAR) {
+ dev_err(ctrl->dev, "Parity or Uncorrectable ECC error: "
+ "LTESR 0x%08X\n", status);
+ smp_wmb();
+ wake_up(&ctrl->irq_wait);
+ }
+ if (status & LTESR_CC) {
+ smp_wmb();
+ wake_up(&ctrl->irq_wait);
+ }
+ if (status & ~LTESR_MASK)
+ dev_err(ctrl->dev, "Unknown error: "
+ "LTESR 0x%08X\n", status);
+ return IRQ_HANDLED;
+}
+
+/*
+ * fsl_lbc_ctrl_probe
+ *
+ * called by device layer when it finds a device matching
+ * one our driver can handled. This code allocates all of
+ * the resources needed for the controller only. The
+ * resources for the NAND banks themselves are allocated
+ * in the chip probe function.
+*/
+
+static int __devinit fsl_lbc_ctrl_probe(struct platform_device *dev)
+{
+ int ret;
+
+ if (!dev->dev.of_node) {
+ dev_err(&dev->dev, "Device OF-Node is NULL");
+ return -EFAULT;
+ }
+
+ fsl_lbc_ctrl_dev = kzalloc(sizeof(*fsl_lbc_ctrl_dev), GFP_KERNEL);
+ if (!fsl_lbc_ctrl_dev)
+ return -ENOMEM;
+
+ dev_set_drvdata(&dev->dev, fsl_lbc_ctrl_dev);
+
+ spin_lock_init(&fsl_lbc_ctrl_dev->lock);
+ init_waitqueue_head(&fsl_lbc_ctrl_dev->irq_wait);
+
+ fsl_lbc_ctrl_dev->regs = of_iomap(dev->dev.of_node, 0);
+ if (!fsl_lbc_ctrl_dev->regs) {
+ dev_err(&dev->dev, "failed to get memory region\n");
+ ret = -ENODEV;
+ goto err;
+ }
+
+ fsl_lbc_ctrl_dev->irq = irq_of_parse_and_map(dev->dev.of_node, 0);
+ if (fsl_lbc_ctrl_dev->irq == NO_IRQ) {
+ dev_err(&dev->dev, "failed to get irq resource\n");
+ ret = -ENODEV;
+ goto err;
+ }
+
+ fsl_lbc_ctrl_dev->dev = &dev->dev;
+
+ ret = fsl_lbc_ctrl_init(fsl_lbc_ctrl_dev);
+ if (ret < 0)
+ goto err;
+
+ ret = request_irq(fsl_lbc_ctrl_dev->irq, fsl_lbc_ctrl_irq, 0,
+ "fsl-lbc", fsl_lbc_ctrl_dev);
+ if (ret != 0) {
+ dev_err(&dev->dev, "failed to install irq (%d)\n",
+ fsl_lbc_ctrl_dev->irq);
+ ret = fsl_lbc_ctrl_dev->irq;
+ goto err;
+ }
+
+ return 0;
+
+err:
+ iounmap(fsl_lbc_ctrl_dev->regs);
+ kfree(fsl_lbc_ctrl_dev);
+ return ret;
+}
+
+static const struct of_device_id fsl_lbc_match[] = {
+ { .compatible = "fsl,elbc", },
+ { .compatible = "fsl,pq3-localbus", },
+ { .compatible = "fsl,pq2-localbus", },
+ { .compatible = "fsl,pq2pro-localbus", },
+ {},
+};
+
+static struct platform_driver fsl_lbc_ctrl_driver = {
+ .driver = {
+ .name = "fsl-lbc",
+ .of_match_table = fsl_lbc_match,
+ },
+ .probe = fsl_lbc_ctrl_probe,
+};
+
+static int __init fsl_lbc_init(void)
+{
+ return platform_driver_register(&fsl_lbc_ctrl_driver);
+}
+module_init(fsl_lbc_init);
diff --git a/arch/sh/boards/mach-ap325rxa/setup.c b/arch/sh/boards/mach-ap325rxa/setup.c
index 881a3a5f564..07ea908c510 100644
--- a/arch/sh/boards/mach-ap325rxa/setup.c
+++ b/arch/sh/boards/mach-ap325rxa/setup.c
@@ -176,6 +176,21 @@ static void ap320_wvga_power_off(void *board_data)
__raw_writew(0, FPGA_LCDREG);
}
+const static struct fb_videomode ap325rxa_lcdc_modes[] = {
+ {
+ .name = "LB070WV1",
+ .xres = 800,
+ .yres = 480,
+ .left_margin = 32,
+ .right_margin = 160,
+ .hsync_len = 8,
+ .upper_margin = 63,
+ .lower_margin = 80,
+ .vsync_len = 1,
+ .sync = 0, /* hsync and vsync are active low */
+ },
+};
+
static struct sh_mobile_lcdc_info lcdc_info = {
.clock_source = LCDC_CLK_EXTERNAL,
.ch[0] = {
@@ -183,18 +198,8 @@ static struct sh_mobile_lcdc_info lcdc_info = {
.bpp = 16,
.interface_type = RGB18,
.clock_divider = 1,
- .lcd_cfg = {
- .name = "LB070WV1",
- .xres = 800,
- .yres = 480,
- .left_margin = 32,
- .right_margin = 160,
- .hsync_len = 8,
- .upper_margin = 63,
- .lower_margin = 80,
- .vsync_len = 1,
- .sync = 0, /* hsync and vsync are active low */
- },
+ .lcd_cfg = ap325rxa_lcdc_modes,
+ .num_cfg = ARRAY_SIZE(ap325rxa_lcdc_modes),
.lcd_size_cfg = { /* 7.0 inch */
.width = 152,
.height = 91,
diff --git a/arch/sh/boards/mach-ecovec24/setup.c b/arch/sh/boards/mach-ecovec24/setup.c
index ddc7e4e4d2a..2eaeb9e5958 100644
--- a/arch/sh/boards/mach-ecovec24/setup.c
+++ b/arch/sh/boards/mach-ecovec24/setup.c
@@ -231,14 +231,41 @@ static struct platform_device usb1_common_device = {
};
/* LCDC */
+const static struct fb_videomode ecovec_lcd_modes[] = {
+ {
+ .name = "Panel",
+ .xres = 800,
+ .yres = 480,
+ .left_margin = 220,
+ .right_margin = 110,
+ .hsync_len = 70,
+ .upper_margin = 20,
+ .lower_margin = 5,
+ .vsync_len = 5,
+ .sync = 0, /* hsync and vsync are active low */
+ },
+};
+
+const static struct fb_videomode ecovec_dvi_modes[] = {
+ {
+ .name = "DVI",
+ .xres = 1280,
+ .yres = 720,
+ .left_margin = 220,
+ .right_margin = 110,
+ .hsync_len = 40,
+ .upper_margin = 20,
+ .lower_margin = 5,
+ .vsync_len = 5,
+ .sync = 0, /* hsync and vsync are active low */
+ },
+};
+
static struct sh_mobile_lcdc_info lcdc_info = {
.ch[0] = {
.interface_type = RGB18,
.chan = LCDC_CHAN_MAINLCD,
.bpp = 16,
- .lcd_cfg = {
- .sync = 0, /* hsync and vsync are active low */
- },
.lcd_size_cfg = { /* 7.0 inch */
.width = 152,
.height = 91,
@@ -1075,33 +1102,18 @@ static int __init arch_setup(void)
if (gpio_get_value(GPIO_PTE6)) {
/* DVI */
lcdc_info.clock_source = LCDC_CLK_EXTERNAL;
- lcdc_info.ch[0].clock_divider = 1,
- lcdc_info.ch[0].lcd_cfg.name = "DVI";
- lcdc_info.ch[0].lcd_cfg.xres = 1280;
- lcdc_info.ch[0].lcd_cfg.yres = 720;
- lcdc_info.ch[0].lcd_cfg.left_margin = 220;
- lcdc_info.ch[0].lcd_cfg.right_margin = 110;
- lcdc_info.ch[0].lcd_cfg.hsync_len = 40;
- lcdc_info.ch[0].lcd_cfg.upper_margin = 20;
- lcdc_info.ch[0].lcd_cfg.lower_margin = 5;
- lcdc_info.ch[0].lcd_cfg.vsync_len = 5;
+ lcdc_info.ch[0].clock_divider = 1;
+ lcdc_info.ch[0].lcd_cfg = ecovec_dvi_modes;
+ lcdc_info.ch[0].num_cfg = ARRAY_SIZE(ecovec_dvi_modes);
gpio_set_value(GPIO_PTA2, 1);
gpio_set_value(GPIO_PTU1, 1);
} else {
/* Panel */
-
lcdc_info.clock_source = LCDC_CLK_PERIPHERAL;
- lcdc_info.ch[0].clock_divider = 2,
- lcdc_info.ch[0].lcd_cfg.name = "Panel";
- lcdc_info.ch[0].lcd_cfg.xres = 800;
- lcdc_info.ch[0].lcd_cfg.yres = 480;
- lcdc_info.ch[0].lcd_cfg.left_margin = 220;
- lcdc_info.ch[0].lcd_cfg.right_margin = 110;
- lcdc_info.ch[0].lcd_cfg.hsync_len = 70;
- lcdc_info.ch[0].lcd_cfg.upper_margin = 20;
- lcdc_info.ch[0].lcd_cfg.lower_margin = 5;
- lcdc_info.ch[0].lcd_cfg.vsync_len = 5;
+ lcdc_info.ch[0].clock_divider = 2;
+ lcdc_info.ch[0].lcd_cfg = ecovec_lcd_modes;
+ lcdc_info.ch[0].num_cfg = ARRAY_SIZE(ecovec_lcd_modes);
gpio_set_value(GPIO_PTR1, 1);
diff --git a/arch/sh/boards/mach-kfr2r09/setup.c b/arch/sh/boards/mach-kfr2r09/setup.c
index 1742849db64..9b60eaabf8f 100644
--- a/arch/sh/boards/mach-kfr2r09/setup.c
+++ b/arch/sh/boards/mach-kfr2r09/setup.c
@@ -126,6 +126,21 @@ static struct platform_device kfr2r09_sh_keysc_device = {
},
};
+const static struct fb_videomode kfr2r09_lcdc_modes[] = {
+ {
+ .name = "TX07D34VM0AAA",
+ .xres = 240,
+ .yres = 400,
+ .left_margin = 0,
+ .right_margin = 16,
+ .hsync_len = 8,
+ .upper_margin = 0,
+ .lower_margin = 1,
+ .vsync_len = 1,
+ .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+ },
+};
+
static struct sh_mobile_lcdc_info kfr2r09_sh_lcdc_info = {
.clock_source = LCDC_CLK_BUS,
.ch[0] = {
@@ -134,18 +149,8 @@ static struct sh_mobile_lcdc_info kfr2r09_sh_lcdc_info = {
.interface_type = SYS18,
.clock_divider = 6,
.flags = LCDC_FLAGS_DWPOL,
- .lcd_cfg = {
- .name = "TX07D34VM0AAA",
- .xres = 240,
- .yres = 400,
- .left_margin = 0,
- .right_margin = 16,
- .hsync_len = 8,
- .upper_margin = 0,
- .lower_margin = 1,
- .vsync_len = 1,
- .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
- },
+ .lcd_cfg = kfr2r09_lcdc_modes,
+ .num_cfg = ARRAY_SIZE(kfr2r09_lcdc_modes),
.lcd_size_cfg = {
.width = 35,
.height = 58,
diff --git a/arch/sh/boards/mach-migor/setup.c b/arch/sh/boards/mach-migor/setup.c
index 03af8484255..c8acfec9869 100644
--- a/arch/sh/boards/mach-migor/setup.c
+++ b/arch/sh/boards/mach-migor/setup.c
@@ -213,51 +213,55 @@ static struct platform_device migor_nand_flash_device = {
}
};
+const static struct fb_videomode migor_lcd_modes[] = {
+ {
+#if defined(CONFIG_SH_MIGOR_RTA_WVGA)
+ .name = "LB070WV1",
+ .xres = 800,
+ .yres = 480,
+ .left_margin = 64,
+ .right_margin = 16,
+ .hsync_len = 120,
+ .sync = 0,
+#elif defined(CONFIG_SH_MIGOR_QVGA)
+ .name = "PH240320T",
+ .xres = 320,
+ .yres = 240,
+ .left_margin = 0,
+ .right_margin = 16,
+ .hsync_len = 8,
+ .sync = FB_SYNC_HOR_HIGH_ACT,
+#endif
+ .upper_margin = 1,
+ .lower_margin = 17,
+ .vsync_len = 2,
+ },
+};
+
static struct sh_mobile_lcdc_info sh_mobile_lcdc_info = {
-#ifdef CONFIG_SH_MIGOR_RTA_WVGA
+#if defined(CONFIG_SH_MIGOR_RTA_WVGA)
.clock_source = LCDC_CLK_BUS,
.ch[0] = {
.chan = LCDC_CHAN_MAINLCD,
.bpp = 16,
.interface_type = RGB16,
.clock_divider = 2,
- .lcd_cfg = {
- .name = "LB070WV1",
- .xres = 800,
- .yres = 480,
- .left_margin = 64,
- .right_margin = 16,
- .hsync_len = 120,
- .upper_margin = 1,
- .lower_margin = 17,
- .vsync_len = 2,
- .sync = 0,
- },
+ .lcd_cfg = migor_lcd_modes,
+ .num_cfg = ARRAY_SIZE(migor_lcd_modes),
.lcd_size_cfg = { /* 7.0 inch */
.width = 152,
.height = 91,
},
}
-#endif
-#ifdef CONFIG_SH_MIGOR_QVGA
+#elif defined(CONFIG_SH_MIGOR_QVGA)
.clock_source = LCDC_CLK_PERIPHERAL,
.ch[0] = {
.chan = LCDC_CHAN_MAINLCD,
.bpp = 16,
.interface_type = SYS16A,
.clock_divider = 10,
- .lcd_cfg = {
- .name = "PH240320T",
- .xres = 320,
- .yres = 240,
- .left_margin = 0,
- .right_margin = 16,
- .hsync_len = 8,
- .upper_margin = 1,
- .lower_margin = 17,
- .vsync_len = 2,
- .sync = FB_SYNC_HOR_HIGH_ACT,
- },
+ .lcd_cfg = migor_lcd_modes,
+ .num_cfg = ARRAY_SIZE(migor_lcd_modes),
.lcd_size_cfg = { /* 2.4 inch */
.width = 49,
.height = 37,
diff --git a/arch/sh/boards/mach-se/7724/setup.c b/arch/sh/boards/mach-se/7724/setup.c
index 8cc1d7295d8..c31d228fdfc 100644
--- a/arch/sh/boards/mach-se/7724/setup.c
+++ b/arch/sh/boards/mach-se/7724/setup.c
@@ -144,16 +144,42 @@ static struct platform_device nor_flash_device = {
};
/* LCDC */
+const static struct fb_videomode lcdc_720p_modes[] = {
+ {
+ .name = "LB070WV1",
+ .sync = 0, /* hsync and vsync are active low */
+ .xres = 1280,
+ .yres = 720,
+ .left_margin = 220,
+ .right_margin = 110,
+ .hsync_len = 40,
+ .upper_margin = 20,
+ .lower_margin = 5,
+ .vsync_len = 5,
+ },
+};
+
+const static struct fb_videomode lcdc_vga_modes[] = {
+ {
+ .name = "LB070WV1",
+ .sync = 0, /* hsync and vsync are active low */
+ .xres = 640,
+ .yres = 480,
+ .left_margin = 105,
+ .right_margin = 50,
+ .hsync_len = 96,
+ .upper_margin = 33,
+ .lower_margin = 10,
+ .vsync_len = 2,
+ },
+};
+
static struct sh_mobile_lcdc_info lcdc_info = {
.clock_source = LCDC_CLK_EXTERNAL,
.ch[0] = {
.chan = LCDC_CHAN_MAINLCD,
.bpp = 16,
.clock_divider = 1,
- .lcd_cfg = {
- .name = "LB070WV1",
- .sync = 0, /* hsync and vsync are active low */
- },
.lcd_size_cfg = { /* 7.0 inch */
.width = 152,
.height = 91,
@@ -908,24 +934,12 @@ static int __init devices_setup(void)
if (sw & SW41_B) {
/* 720p */
- lcdc_info.ch[0].lcd_cfg.xres = 1280;
- lcdc_info.ch[0].lcd_cfg.yres = 720;
- lcdc_info.ch[0].lcd_cfg.left_margin = 220;
- lcdc_info.ch[0].lcd_cfg.right_margin = 110;
- lcdc_info.ch[0].lcd_cfg.hsync_len = 40;
- lcdc_info.ch[0].lcd_cfg.upper_margin = 20;
- lcdc_info.ch[0].lcd_cfg.lower_margin = 5;
- lcdc_info.ch[0].lcd_cfg.vsync_len = 5;
+ lcdc_info.ch[0].lcd_cfg = lcdc_720p_modes;
+ lcdc_info.ch[0].num_cfg = ARRAY_SIZE(lcdc_720p_modes);
} else {
/* VGA */
- lcdc_info.ch[0].lcd_cfg.xres = 640;
- lcdc_info.ch[0].lcd_cfg.yres = 480;
- lcdc_info.ch[0].lcd_cfg.left_margin = 105;
- lcdc_info.ch[0].lcd_cfg.right_margin = 50;
- lcdc_info.ch[0].lcd_cfg.hsync_len = 96;
- lcdc_info.ch[0].lcd_cfg.upper_margin = 33;
- lcdc_info.ch[0].lcd_cfg.lower_margin = 10;
- lcdc_info.ch[0].lcd_cfg.vsync_len = 2;
+ lcdc_info.ch[0].lcd_cfg = lcdc_vga_modes;
+ lcdc_info.ch[0].num_cfg = ARRAY_SIZE(lcdc_vga_modes);
}
if (sw & SW41_A) {
diff --git a/arch/sparc/include/asm/jump_label.h b/arch/sparc/include/asm/jump_label.h
index 65c0d302979..427d4684e0d 100644
--- a/arch/sparc/include/asm/jump_label.h
+++ b/arch/sparc/include/asm/jump_label.h
@@ -13,6 +13,7 @@
"nop\n\t" \
"nop\n\t" \
".pushsection __jump_table, \"a\"\n\t"\
+ ".align 4\n\t" \
".word 1b, %l[" #label "], %c0\n\t" \
".popsection \n\t" \
: : "i" (key) : : label);\
diff --git a/arch/x86/Makefile_32.cpu b/arch/x86/Makefile_32.cpu
index 1255d953c65..f2ee1abb1df 100644
--- a/arch/x86/Makefile_32.cpu
+++ b/arch/x86/Makefile_32.cpu
@@ -51,7 +51,18 @@ cflags-$(CONFIG_X86_GENERIC) += $(call tune,generic,$(call tune,i686))
# prologue (push %ebp, mov %esp, %ebp) which breaks the function graph
# tracer assumptions. For i686, generic, core2 this is set by the
# compiler anyway
-cflags-$(CONFIG_FUNCTION_GRAPH_TRACER) += $(call cc-option,-maccumulate-outgoing-args)
+ifeq ($(CONFIG_FUNCTION_GRAPH_TRACER), y)
+ADD_ACCUMULATE_OUTGOING_ARGS := y
+endif
+
+# Work around to a bug with asm goto with first implementations of it
+# in gcc causing gcc to mess up the push and pop of the stack in some
+# uses of asm goto.
+ifeq ($(CONFIG_JUMP_LABEL), y)
+ADD_ACCUMULATE_OUTGOING_ARGS := y
+endif
+
+cflags-$(ADD_ACCUMULATE_OUTGOING_ARGS) += $(call cc-option,-maccumulate-outgoing-args)
# Bug fix for binutils: this option is required in order to keep
# binutils from generating NOPL instructions against our will.
diff --git a/arch/x86/kernel/alternative.c b/arch/x86/kernel/alternative.c
index 5ceeca38282..5079f24c955 100644
--- a/arch/x86/kernel/alternative.c
+++ b/arch/x86/kernel/alternative.c
@@ -644,65 +644,26 @@ void *__kprobes text_poke_smp(void *addr, const void *opcode, size_t len)
#if defined(CONFIG_DYNAMIC_FTRACE) || defined(HAVE_JUMP_LABEL)
-unsigned char ideal_nop5[IDEAL_NOP_SIZE_5];
+#ifdef CONFIG_X86_64
+unsigned char ideal_nop5[5] = { 0x66, 0x66, 0x66, 0x66, 0x90 };
+#else
+unsigned char ideal_nop5[5] = { 0x3e, 0x8d, 0x74, 0x26, 0x00 };
+#endif
void __init arch_init_ideal_nop5(void)
{
- extern const unsigned char ftrace_test_p6nop[];
- extern const unsigned char ftrace_test_nop5[];
- extern const unsigned char ftrace_test_jmp[];
- int faulted = 0;
-
/*
- * There is no good nop for all x86 archs.
- * We will default to using the P6_NOP5, but first we
- * will test to make sure that the nop will actually
- * work on this CPU. If it faults, we will then
- * go to a lesser efficient 5 byte nop. If that fails
- * we then just use a jmp as our nop. This isn't the most
- * efficient nop, but we can not use a multi part nop
- * since we would then risk being preempted in the middle
- * of that nop, and if we enabled tracing then, it might
- * cause a system crash.
+ * There is no good nop for all x86 archs. This selection
+ * algorithm should be unified with the one in find_nop_table(),
+ * but this should be good enough for now.
*
- * TODO: check the cpuid to determine the best nop.
+ * For cases other than the ones below, use the safe (as in
+ * always functional) defaults above.
*/
- asm volatile (
- "ftrace_test_jmp:"
- "jmp ftrace_test_p6nop\n"
- "nop\n"
- "nop\n"
- "nop\n" /* 2 byte jmp + 3 bytes */
- "ftrace_test_p6nop:"
- P6_NOP5
- "jmp 1f\n"
- "ftrace_test_nop5:"
- ".byte 0x66,0x66,0x66,0x66,0x90\n"
- "1:"
- ".section .fixup, \"ax\"\n"
- "2: movl $1, %0\n"
- " jmp ftrace_test_nop5\n"
- "3: movl $2, %0\n"
- " jmp 1b\n"
- ".previous\n"
- _ASM_EXTABLE(ftrace_test_p6nop, 2b)
- _ASM_EXTABLE(ftrace_test_nop5, 3b)
- : "=r"(faulted) : "0" (faulted));
-
- switch (faulted) {
- case 0:
- pr_info("converting mcount calls to 0f 1f 44 00 00\n");
- memcpy(ideal_nop5, ftrace_test_p6nop, IDEAL_NOP_SIZE_5);
- break;
- case 1:
- pr_info("converting mcount calls to 66 66 66 66 90\n");
- memcpy(ideal_nop5, ftrace_test_nop5, IDEAL_NOP_SIZE_5);
- break;
- case 2:
- pr_info("converting mcount calls to jmp . + 5\n");
- memcpy(ideal_nop5, ftrace_test_jmp, IDEAL_NOP_SIZE_5);
- break;
- }
-
+#ifdef CONFIG_X86_64
+ /* Don't use these on 32 bits due to broken virtualizers */
+ if (boot_cpu_data.x86_vendor == X86_VENDOR_INTEL)
+ memcpy(ideal_nop5, p6_nops[5], 5);
+#endif
}
#endif
diff --git a/drivers/char/tty_audit.c b/drivers/char/tty_audit.c
index 1b8ee590b4c..f64582b0f62 100644
--- a/drivers/char/tty_audit.c
+++ b/drivers/char/tty_audit.c
@@ -188,25 +188,43 @@ void tty_audit_tiocsti(struct tty_struct *tty, char ch)
}
/**
- * tty_audit_push_task - Flush task's pending audit data
+ * tty_audit_push_task - Flush task's pending audit data
+ * @tsk: task pointer
+ * @loginuid: sender login uid
+ * @sessionid: sender session id
+ *
+ * Called with a ref on @tsk held. Try to lock sighand and get a
+ * reference to the tty audit buffer if available.
+ * Flush the buffer or return an appropriate error code.
*/
-void tty_audit_push_task(struct task_struct *tsk, uid_t loginuid, u32 sessionid)
+int tty_audit_push_task(struct task_struct *tsk, uid_t loginuid, u32 sessionid)
{
- struct tty_audit_buf *buf;
+ struct tty_audit_buf *buf = ERR_PTR(-EPERM);
+ unsigned long flags;
- spin_lock_irq(&tsk->sighand->siglock);
- buf = tsk->signal->tty_audit_buf;
- if (buf)
- atomic_inc(&buf->count);
- spin_unlock_irq(&tsk->sighand->siglock);
- if (!buf)
- return;
+ if (!lock_task_sighand(tsk, &flags))
+ return -ESRCH;
+
+ if (tsk->signal->audit_tty) {
+ buf = tsk->signal->tty_audit_buf;
+ if (buf)
+ atomic_inc(&buf->count);
+ }
+ unlock_task_sighand(tsk, &flags);
+
+ /*
+ * Return 0 when signal->audit_tty set
+ * but tsk->signal->tty_audit_buf == NULL.
+ */
+ if (!buf || IS_ERR(buf))
+ return PTR_ERR(buf);
mutex_lock(&buf->mutex);
tty_audit_buf_push(tsk, loginuid, sessionid, buf);
mutex_unlock(&buf->mutex);
tty_audit_buf_put(buf);
+ return 0;
}
/**
diff --git a/drivers/mtd/chips/cfi_cmdset_0001.c b/drivers/mtd/chips/cfi_cmdset_0001.c
index 9e2b7e9e0ad..ad9268b4441 100644
--- a/drivers/mtd/chips/cfi_cmdset_0001.c
+++ b/drivers/mtd/chips/cfi_cmdset_0001.c
@@ -1496,7 +1496,7 @@ static int __xipram do_write_oneword(struct map_info *map, struct flchip *chip,
switch (mode) {
case FL_WRITING:
- write_cmd = (cfi->cfiq->P_ID != 0x0200) ? CMD(0x40) : CMD(0x41);
+ write_cmd = (cfi->cfiq->P_ID != P_ID_INTEL_PERFORMANCE) ? CMD(0x40) : CMD(0x41);
break;
case FL_OTP_WRITE:
write_cmd = CMD(0xc0);
@@ -1661,7 +1661,7 @@ static int __xipram do_write_buffer(struct map_info *map, struct flchip *chip,
cmd_adr = adr & ~(wbufsize-1);
/* Let's determine this according to the interleave only once */
- write_cmd = (cfi->cfiq->P_ID != 0x0200) ? CMD(0xe8) : CMD(0xe9);
+ write_cmd = (cfi->cfiq->P_ID != P_ID_INTEL_PERFORMANCE) ? CMD(0xe8) : CMD(0xe9);
mutex_lock(&chip->mutex);
ret = get_chip(map, chip, cmd_adr, FL_WRITING);
diff --git a/drivers/mtd/chips/cfi_cmdset_0002.c b/drivers/mtd/chips/cfi_cmdset_0002.c
index ba29d2f0ffd..3b8e32d8797 100644
--- a/drivers/mtd/chips/cfi_cmdset_0002.c
+++ b/drivers/mtd/chips/cfi_cmdset_0002.c
@@ -291,6 +291,23 @@ static void fixup_sst39vf_rev_b(struct mtd_info *mtd, void *param)
cfi->addr_unlock1 = 0x555;
cfi->addr_unlock2 = 0x2AA;
+
+ cfi->sector_erase_cmd = CMD(0x50);
+}
+
+static void fixup_sst38vf640x_sectorsize(struct mtd_info *mtd, void *param)
+{
+ struct map_info *map = mtd->priv;
+ struct cfi_private *cfi = map->fldrv_priv;
+
+ fixup_sst39vf_rev_b(mtd, param);
+
+ /*
+ * CFI reports 1024 sectors (0x03ff+1) of 64KBytes (0x0100*256) where
+ * it should report a size of 8KBytes (0x0020*256).
+ */
+ cfi->cfiq->EraseRegionInfo[0] = 0x002003ff;
+ pr_warning("%s: Bad 38VF640x CFI data; adjusting sector size from 64 to 8KiB\n", mtd->name);
}
static void fixup_s29gl064n_sectors(struct mtd_info *mtd, void *param)
@@ -317,14 +334,14 @@ static void fixup_s29gl032n_sectors(struct mtd_info *mtd, void *param)
/* Used to fix CFI-Tables of chips without Extended Query Tables */
static struct cfi_fixup cfi_nopri_fixup_table[] = {
- { CFI_MFR_SST, 0x234A, fixup_sst39vf, NULL, }, // SST39VF1602
- { CFI_MFR_SST, 0x234B, fixup_sst39vf, NULL, }, // SST39VF1601
- { CFI_MFR_SST, 0x235A, fixup_sst39vf, NULL, }, // SST39VF3202
- { CFI_MFR_SST, 0x235B, fixup_sst39vf, NULL, }, // SST39VF3201
- { CFI_MFR_SST, 0x235C, fixup_sst39vf_rev_b, NULL, }, // SST39VF3202B
- { CFI_MFR_SST, 0x235D, fixup_sst39vf_rev_b, NULL, }, // SST39VF3201B
- { CFI_MFR_SST, 0x236C, fixup_sst39vf_rev_b, NULL, }, // SST39VF6402B
- { CFI_MFR_SST, 0x236D, fixup_sst39vf_rev_b, NULL, }, // SST39VF6401B
+ { CFI_MFR_SST, 0x234A, fixup_sst39vf, NULL, }, /* SST39VF1602 */
+ { CFI_MFR_SST, 0x234B, fixup_sst39vf, NULL, }, /* SST39VF1601 */
+ { CFI_MFR_SST, 0x235A, fixup_sst39vf, NULL, }, /* SST39VF3202 */
+ { CFI_MFR_SST, 0x235B, fixup_sst39vf, NULL, }, /* SST39VF3201 */
+ { CFI_MFR_SST, 0x235C, fixup_sst39vf_rev_b, NULL, }, /* SST39VF3202B */
+ { CFI_MFR_SST, 0x235D, fixup_sst39vf_rev_b, NULL, }, /* SST39VF3201B */
+ { CFI_MFR_SST, 0x236C, fixup_sst39vf_rev_b, NULL, }, /* SST39VF6402B */
+ { CFI_MFR_SST, 0x236D, fixup_sst39vf_rev_b, NULL, }, /* SST39VF6401B */
{ 0, 0, NULL, NULL }
};
@@ -344,6 +361,10 @@ static struct cfi_fixup cfi_fixup_table[] = {
{ CFI_MFR_AMD, 0x1301, fixup_s29gl064n_sectors, NULL, },
{ CFI_MFR_AMD, 0x1a00, fixup_s29gl032n_sectors, NULL, },
{ CFI_MFR_AMD, 0x1a01, fixup_s29gl032n_sectors, NULL, },
+ { CFI_MFR_SST, 0x536A, fixup_sst38vf640x_sectorsize, NULL, }, /* SST38VF6402 */
+ { CFI_MFR_SST, 0x536B, fixup_sst38vf640x_sectorsize, NULL, }, /* SST38VF6401 */
+ { CFI_MFR_SST, 0x536C, fixup_sst38vf640x_sectorsize, NULL, }, /* SST38VF6404 */
+ { CFI_MFR_SST, 0x536D, fixup_sst38vf640x_sectorsize, NULL, }, /* SST38VF6403 */
#if !FORCE_WORD_WRITE
{ CFI_MFR_ANY, CFI_ID_ANY, fixup_use_write_buffers, NULL, },
#endif
@@ -374,6 +395,13 @@ static void cfi_fixup_major_minor(struct cfi_private *cfi,
if (cfi->mfr == CFI_MFR_SAMSUNG && cfi->id == 0x257e &&
extp->MajorVersion == '0')
extp->MajorVersion = '1';
+ /*
+ * SST 38VF640x chips report major=0xFF / minor=0xFF.
+ */
+ if (cfi->mfr == CFI_MFR_SST && (cfi->id >> 4) == 0x0536) {
+ extp->MajorVersion = '1';
+ extp->MinorVersion = '0';
+ }
}
struct mtd_info *cfi_cmdset_0002(struct map_info *map, int primary)
@@ -545,15 +573,6 @@ static struct mtd_info *cfi_amdstd_setup(struct mtd_info *mtd)
printk(KERN_WARNING "Sum of regions (%lx) != total size of set of interleaved chips (%lx)\n", offset, devsize);
goto setup_err;
}
-#if 0
- // debug
- for (i=0; i<mtd->numeraseregions;i++){
- printk("%d: offset=0x%x,size=0x%x,blocks=%d\n",
- i,mtd->eraseregions[i].offset,
- mtd->eraseregions[i].erasesize,
- mtd->eraseregions[i].numblocks);
- }
-#endif
__module_get(THIS_MODULE);
register_reboot_notifier(&mtd->reboot_notifier);
@@ -674,7 +693,7 @@ static int get_chip(struct map_info *map, struct flchip *chip, unsigned long adr
* there was an error (so leave the erase
* routine to recover from it) or we trying to
* use the erase-in-progress sector. */
- map_write(map, CMD(0x30), chip->in_progress_block_addr);
+ map_write(map, cfi->sector_erase_cmd, chip->in_progress_block_addr);
chip->state = FL_ERASING;
chip->oldstate = FL_READY;
printk(KERN_ERR "MTD %s(): chip not ready after erase suspend\n", __func__);
@@ -727,7 +746,7 @@ static void put_chip(struct map_info *map, struct flchip *chip, unsigned long ad
switch(chip->oldstate) {
case FL_ERASING:
chip->state = chip->oldstate;
- map_write(map, CMD(0x30), chip->in_progress_block_addr);
+ map_write(map, cfi->sector_erase_cmd, chip->in_progress_block_addr);
chip->oldstate = FL_READY;
chip->state = FL_ERASING;
break;
@@ -870,7 +889,7 @@ static void __xipram xip_udelay(struct map_info *map, struct flchip *chip,
local_irq_disable();
/* Resume the write or erase operation */
- map_write(map, CMD(0x30), adr);
+ map_write(map, cfi->sector_erase_cmd, adr);
chip->state = oldstate;
start = xip_currtime();
} else if (usec >= 1000000/HZ) {
@@ -1025,9 +1044,6 @@ static inline int do_read_secsi_onechip(struct map_info *map, struct flchip *chi
mutex_lock(&chip->mutex);
if (chip->state != FL_READY){
-#if 0
- printk(KERN_DEBUG "Waiting for chip to read, status = %d\n", chip->state);
-#endif
set_current_state(TASK_UNINTERRUPTIBLE);
add_wait_queue(&chip->wq, &wait);
@@ -1035,10 +1051,6 @@ static inline int do_read_secsi_onechip(struct map_info *map, struct flchip *chi
schedule();
remove_wait_queue(&chip->wq, &wait);
-#if 0
- if(signal_pending(current))
- return -EINTR;
-#endif
timeo = jiffies + HZ;
goto retry;
@@ -1246,9 +1258,6 @@ static int cfi_amdstd_write_words(struct mtd_info *mtd, loff_t to, size_t len,
mutex_lock(&cfi->chips[chipnum].mutex);
if (cfi->chips[chipnum].state != FL_READY) {
-#if 0
- printk(KERN_DEBUG "Waiting for chip to write, status = %d\n", cfi->chips[chipnum].state);
-#endif
set_current_state(TASK_UNINTERRUPTIBLE);
add_wait_queue(&cfi->chips[chipnum].wq, &wait);
@@ -1256,10 +1265,6 @@ static int cfi_amdstd_write_words(struct mtd_info *mtd, loff_t to, size_t len,
schedule();
remove_wait_queue(&cfi->chips[chipnum].wq, &wait);
-#if 0
- if(signal_pending(current))
- return -EINTR;
-#endif
goto retry;
}
@@ -1324,9 +1329,6 @@ static int cfi_amdstd_write_words(struct mtd_info *mtd, loff_t to, size_t len,
mutex_lock(&cfi->chips[chipnum].mutex);
if (cfi->chips[chipnum].state != FL_READY) {
-#if 0
- printk(KERN_DEBUG "Waiting for chip to write, status = %d\n", cfi->chips[chipnum].state);
-#endif
set_current_state(TASK_UNINTERRUPTIBLE);
add_wait_queue(&cfi->chips[chipnum].wq, &wait);
@@ -1334,10 +1336,6 @@ static int cfi_amdstd_write_words(struct mtd_info *mtd, loff_t to, size_t len,
schedule();
remove_wait_queue(&cfi->chips[chipnum].wq, &wait);
-#if 0
- if(signal_pending(current))
- return -EINTR;
-#endif
goto retry1;
}
@@ -1396,7 +1394,6 @@ static int __xipram do_write_buffer(struct map_info *map, struct flchip *chip,
cfi_send_gen_cmd(0xAA, cfi->addr_unlock1, chip->start, map, cfi, cfi->device_type, NULL);
cfi_send_gen_cmd(0x55, cfi->addr_unlock2, chip->start, map, cfi, cfi->device_type, NULL);
- //cfi_send_gen_cmd(0xA0, cfi->addr_unlock1, chip->start, map, cfi, cfi->device_type, NULL);
/* Write Buffer Load */
map_write(map, CMD(0x25), cmd_adr);
@@ -1675,7 +1672,7 @@ static int __xipram do_erase_oneblock(struct map_info *map, struct flchip *chip,
cfi_send_gen_cmd(0x80, cfi->addr_unlock1, chip->start, map, cfi, cfi->device_type, NULL);
cfi_send_gen_cmd(0xAA, cfi->addr_unlock1, chip->start, map, cfi, cfi->device_type, NULL);
cfi_send_gen_cmd(0x55, cfi->addr_unlock2, chip->start, map, cfi, cfi->device_type, NULL);
- map_write(map, CMD(0x30), adr);
+ map_write(map, cfi->sector_erase_cmd, adr);
chip->state = FL_ERASING;
chip->erase_suspended = 0;
diff --git a/drivers/mtd/chips/cfi_probe.c b/drivers/mtd/chips/cfi_probe.c
index 8f5b96aa87a..d2553527940 100644
--- a/drivers/mtd/chips/cfi_probe.c
+++ b/drivers/mtd/chips/cfi_probe.c
@@ -177,6 +177,8 @@ static int __xipram cfi_chip_setup(struct map_info *map,
cfi->cfi_mode = CFI_MODE_CFI;
+ cfi->sector_erase_cmd = CMD(0x30);
+
/* Read the CFI info structure */
xip_disable_qry(base, map, cfi);
for (i=0; i<(sizeof(struct cfi_ident) + num_erase_regions * 4); i++)
diff --git a/drivers/mtd/chips/cfi_util.c b/drivers/mtd/chips/cfi_util.c
index e503b2ca894..360525c637d 100644
--- a/drivers/mtd/chips/cfi_util.c
+++ b/drivers/mtd/chips/cfi_util.c
@@ -77,6 +77,13 @@ int __xipram cfi_qry_mode_on(uint32_t base, struct map_info *map,
cfi_send_gen_cmd(0x98, 0x5555, base, map, cfi, cfi->device_type, NULL);
if (cfi_qry_present(map, base, cfi))
return 1;
+ /* SST 39VF640xB */
+ cfi_send_gen_cmd(0xF0, 0, base, map, cfi, cfi->device_type, NULL);
+ cfi_send_gen_cmd(0xAA, 0x555, base, map, cfi, cfi->device_type, NULL);
+ cfi_send_gen_cmd(0x55, 0x2AA, base, map, cfi, cfi->device_type, NULL);
+ cfi_send_gen_cmd(0x98, 0x555, base, map, cfi, cfi->device_type, NULL);
+ if (cfi_qry_present(map, base, cfi))
+ return 1;
/* QRY not found */
return 0;
}
diff --git a/drivers/mtd/devices/block2mtd.c b/drivers/mtd/devices/block2mtd.c
index 93651865ddb..2cf0cc6a418 100644
--- a/drivers/mtd/devices/block2mtd.c
+++ b/drivers/mtd/devices/block2mtd.c
@@ -91,7 +91,6 @@ static int block2mtd_erase(struct mtd_info *mtd, struct erase_info *instr)
} else
instr->state = MTD_ERASE_DONE;
- instr->state = MTD_ERASE_DONE;
mtd_erase_callback(instr);
return err;
}
diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c
index ea22520c040..bf5a002209b 100644
--- a/drivers/mtd/devices/m25p80.c
+++ b/drivers/mtd/devices/m25p80.c
@@ -661,11 +661,14 @@ static const struct spi_device_id m25p_ids[] = {
{ "s25sl008a", INFO(0x010213, 0, 64 * 1024, 16, 0) },
{ "s25sl016a", INFO(0x010214, 0, 64 * 1024, 32, 0) },
{ "s25sl032a", INFO(0x010215, 0, 64 * 1024, 64, 0) },
+ { "s25sl032p", INFO(0x010215, 0x4d00, 64 * 1024, 64, SECT_4K) },
{ "s25sl064a", INFO(0x010216, 0, 64 * 1024, 128, 0) },
{ "s25sl12800", INFO(0x012018, 0x0300, 256 * 1024, 64, 0) },
{ "s25sl12801", INFO(0x012018, 0x0301, 64 * 1024, 256, 0) },
{ "s25fl129p0", INFO(0x012018, 0x4d00, 256 * 1024, 64, 0) },
{ "s25fl129p1", INFO(0x012018, 0x4d01, 64 * 1024, 256, 0) },
+ { "s25fl016k", INFO(0xef4015, 0, 64 * 1024, 32, SECT_4K) },
+ { "s25fl064k", INFO(0xef4017, 0, 64 * 1024, 128, SECT_4K) },
/* SST -- large erase sizes are "overlays", "sectors" are 4K */
{ "sst25vf040b", INFO(0xbf258d, 0, 64 * 1024, 8, SECT_4K) },
@@ -714,6 +717,7 @@ static const struct spi_device_id m25p_ids[] = {
{ "w25x32", INFO(0xef3016, 0, 64 * 1024, 64, SECT_4K) },
{ "w25q32", INFO(0xef4016, 0, 64 * 1024, 64, SECT_4K) },
{ "w25x64", INFO(0xef3017, 0, 64 * 1024, 128, SECT_4K) },
+ { "w25q64", INFO(0xef4017, 0, 64 * 1024, 128, SECT_4K) },
/* Catalyst / On Semiconductor -- non-JEDEC */
{ "cat25c11", CAT25_INFO( 16, 8, 16, 1) },
@@ -924,7 +928,7 @@ static int __devinit m25p_probe(struct spi_device *spi)
nr_parts = data->nr_parts;
}
-#ifdef CONFIG_OF
+#ifdef CONFIG_MTD_OF_PARTS
if (nr_parts <= 0 && spi->dev.of_node) {
nr_parts = of_mtd_parse_partitions(&spi->dev,
spi->dev.of_node, &parts);
diff --git a/drivers/mtd/devices/phram.c b/drivers/mtd/devices/phram.c
index 1696bbecaa7..52393282eaf 100644
--- a/drivers/mtd/devices/phram.c
+++ b/drivers/mtd/devices/phram.c
@@ -15,7 +15,7 @@
* phram=swap,64Mi,128Mi phram=test,900Mi,1Mi
*/
-#define pr_fmt(fmt) "phram: " fmt
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <asm/io.h>
#include <linux/init.h>
diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig
index 962212628f6..a0dd7bba948 100644
--- a/drivers/mtd/maps/Kconfig
+++ b/drivers/mtd/maps/Kconfig
@@ -251,6 +251,15 @@ config MTD_NETtel
help
Support for flash chips on NETtel/SecureEdge/SnapGear boards.
+config MTD_BCM963XX
+ tristate "Map driver for Broadcom BCM963xx boards"
+ depends on BCM63XX
+ select MTD_MAP_BANK_WIDTH_2
+ select MTD_CFI_I1
+ help
+ Support for parsing CFE image tag and creating MTD partitions on
+ Broadcom BCM63xx boards.
+
config MTD_DILNETPC
tristate "CFI Flash device mapped on DIL/Net PC"
depends on X86 && MTD_CONCAT && MTD_PARTITIONS && MTD_CFI_INTELEXT && BROKEN
diff --git a/drivers/mtd/maps/Makefile b/drivers/mtd/maps/Makefile
index f216bb57371..c7869c7a6b1 100644
--- a/drivers/mtd/maps/Makefile
+++ b/drivers/mtd/maps/Makefile
@@ -58,3 +58,4 @@ obj-$(CONFIG_MTD_BFIN_ASYNC) += bfin-async-flash.o
obj-$(CONFIG_MTD_RBTX4939) += rbtx4939-flash.o
obj-$(CONFIG_MTD_VMU) += vmu-flash.o
obj-$(CONFIG_MTD_GPIO_ADDR) += gpio-addr-flash.o
+obj-$(CONFIG_MTD_BCM963XX) += bcm963xx-flash.o
diff --git a/drivers/mtd/maps/bcm963xx-flash.c b/drivers/mtd/maps/bcm963xx-flash.c
new file mode 100644
index 00000000000..d175c120ee8
--- /dev/null
+++ b/drivers/mtd/maps/bcm963xx-flash.c
@@ -0,0 +1,271 @@
+/*
+ * Copyright © 2006-2008 Florian Fainelli <florian@openwrt.org>
+ * Mike Albon <malbon@openwrt.org>
+ * Copyright © 2009-2010 Daniel Dickinson <openwrt@cshore.neomailbox.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/vmalloc.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+
+#include <asm/mach-bcm63xx/bcm963xx_tag.h>
+
+#define BCM63XX_BUSWIDTH 2 /* Buswidth */
+#define BCM63XX_EXTENDED_SIZE 0xBFC00000 /* Extended flash address */
+
+#define PFX KBUILD_MODNAME ": "
+
+static struct mtd_partition *parsed_parts;
+
+static struct mtd_info *bcm963xx_mtd_info;
+
+static struct map_info bcm963xx_map = {
+ .name = "bcm963xx",
+ .bankwidth = BCM63XX_BUSWIDTH,
+};
+
+static int parse_cfe_partitions(struct mtd_info *master,
+ struct mtd_partition **pparts)
+{
+ /* CFE, NVRAM and global Linux are always present */
+ int nrparts = 3, curpart = 0;
+ struct bcm_tag *buf;
+ struct mtd_partition *parts;
+ int ret;
+ size_t retlen;
+ unsigned int rootfsaddr, kerneladdr, spareaddr;
+ unsigned int rootfslen, kernellen, sparelen, totallen;
+ int namelen = 0;
+ int i;
+ char *boardid;
+ char *tagversion;
+
+ /* Allocate memory for buffer */
+ buf = vmalloc(sizeof(struct bcm_tag));
+ if (!buf)
+ return -ENOMEM;
+
+ /* Get the tag */
+ ret = master->read(master, master->erasesize, sizeof(struct bcm_tag),
+ &retlen, (void *)buf);
+ if (retlen != sizeof(struct bcm_tag)) {
+ vfree(buf);
+ return -EIO;
+ }
+
+ sscanf(buf->kernel_address, "%u", &kerneladdr);
+ sscanf(buf->kernel_length, "%u", &kernellen);
+ sscanf(buf->total_length, "%u", &totallen);
+ tagversion = &(buf->tag_version[0]);
+ boardid = &(buf->board_id[0]);
+
+ printk(KERN_INFO PFX "CFE boot tag found with version %s "
+ "and board type %s\n", tagversion, boardid);
+
+ kerneladdr = kerneladdr - BCM63XX_EXTENDED_SIZE;
+ rootfsaddr = kerneladdr + kernellen;
+ spareaddr = roundup(totallen, master->erasesize) + master->erasesize;
+ sparelen = master->size - spareaddr - master->erasesize;
+ rootfslen = spareaddr - rootfsaddr;
+
+ /* Determine number of partitions */
+ namelen = 8;
+ if (rootfslen > 0) {
+ nrparts++;
+ namelen += 6;
+ };
+ if (kernellen > 0) {
+ nrparts++;
+ namelen += 6;
+ };
+
+ /* Ask kernel for more memory */
+ parts = kzalloc(sizeof(*parts) * nrparts + 10 * nrparts, GFP_KERNEL);
+ if (!parts) {
+ vfree(buf);
+ return -ENOMEM;
+ };
+
+ /* Start building partition list */
+ parts[curpart].name = "CFE";
+ parts[curpart].offset = 0;
+ parts[curpart].size = master->erasesize;
+ curpart++;
+
+ if (kernellen > 0) {
+ parts[curpart].name = "kernel";
+ parts[curpart].offset = kerneladdr;
+ parts[curpart].size = kernellen;
+ curpart++;
+ };
+
+ if (rootfslen > 0) {
+ parts[curpart].name = "rootfs";
+ parts[curpart].offset = rootfsaddr;
+ parts[curpart].size = rootfslen;
+ if (sparelen > 0)
+ parts[curpart].size += sparelen;
+ curpart++;
+ };
+
+ parts[curpart].name = "nvram";
+ parts[curpart].offset = master->size - master->erasesize;
+ parts[curpart].size = master->erasesize;
+
+ /* Global partition "linux" to make easy firmware upgrade */
+ curpart++;
+ parts[curpart].name = "linux";
+ parts[curpart].offset = parts[0].size;
+ parts[curpart].size = master->size - parts[0].size - parts[3].size;
+
+ for (i = 0; i < nrparts; i++)
+ printk(KERN_INFO PFX "Partition %d is %s offset %lx and "
+ "length %lx\n", i, parts[i].name,
+ (long unsigned int)(parts[i].offset),
+ (long unsigned int)(parts[i].size));
+
+ printk(KERN_INFO PFX "Spare partition is %x offset and length %x\n",
+ spareaddr, sparelen);
+ *pparts = parts;
+ vfree(buf);
+
+ return nrparts;
+};
+
+static int bcm963xx_detect_cfe(struct mtd_info *master)
+{
+ int idoffset = 0x4e0;
+ static char idstring[8] = "CFE1CFE1";
+ char buf[9];
+ int ret;
+ size_t retlen;
+
+ ret = master->read(master, idoffset, 8, &retlen, (void *)buf);
+ buf[retlen] = 0;
+ printk(KERN_INFO PFX "Read Signature value of %s\n", buf);
+
+ return strncmp(idstring, buf, 8);
+}
+
+static int bcm963xx_probe(struct platform_device *pdev)
+{
+ int err = 0;
+ int parsed_nr_parts = 0;
+ char *part_type;
+ struct resource *r;
+
+ r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!r) {
+ dev_err(&pdev->dev, "no resource supplied\n");
+ return -ENODEV;
+ }
+
+ bcm963xx_map.phys = r->start;
+ bcm963xx_map.size = resource_size(r);
+ bcm963xx_map.virt = ioremap(r->start, resource_size(r));
+ if (!bcm963xx_map.virt) {
+ dev_err(&pdev->dev, "failed to ioremap\n");
+ return -EIO;
+ }
+
+ dev_info(&pdev->dev, "0x%08lx at 0x%08x\n",
+ bcm963xx_map.size, bcm963xx_map.phys);
+
+ simple_map_init(&bcm963xx_map);
+
+ bcm963xx_mtd_info = do_map_probe("cfi_probe", &bcm963xx_map);
+ if (!bcm963xx_mtd_info) {
+ dev_err(&pdev->dev, "failed to probe using CFI\n");
+ err = -EIO;
+ goto err_probe;
+ }
+
+ bcm963xx_mtd_info->owner = THIS_MODULE;
+
+ /* This is mutually exclusive */
+ if (bcm963xx_detect_cfe(bcm963xx_mtd_info) == 0) {
+ dev_info(&pdev->dev, "CFE bootloader detected\n");
+ if (parsed_nr_parts == 0) {
+ int ret = parse_cfe_partitions(bcm963xx_mtd_info,
+ &parsed_parts);
+ if (ret > 0) {
+ part_type = "CFE";
+ parsed_nr_parts = ret;
+ }
+ }
+ } else {
+ dev_info(&pdev->dev, "unsupported bootloader\n");
+ err = -ENODEV;
+ goto err_probe;
+ }
+
+ return add_mtd_partitions(bcm963xx_mtd_info, parsed_parts,
+ parsed_nr_parts);
+
+err_probe:
+ iounmap(bcm963xx_map.virt);
+ return err;
+}
+
+static int bcm963xx_remove(struct platform_device *pdev)
+{
+ if (bcm963xx_mtd_info) {
+ del_mtd_partitions(bcm963xx_mtd_info);
+ map_destroy(bcm963xx_mtd_info);
+ }
+
+ if (bcm963xx_map.virt) {
+ iounmap(bcm963xx_map.virt);
+ bcm963xx_map.virt = 0;
+ }
+
+ return 0;
+}
+
+static struct platform_driver bcm63xx_mtd_dev = {
+ .probe = bcm963xx_probe,
+ .remove = bcm963xx_remove,
+ .driver = {
+ .name = "bcm963xx-flash",
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init bcm963xx_mtd_init(void)
+{
+ return platform_driver_register(&bcm63xx_mtd_dev);
+}
+
+static void __exit bcm963xx_mtd_exit(void)
+{
+ platform_driver_unregister(&bcm63xx_mtd_dev);
+}
+
+module_init(bcm963xx_mtd_init);
+module_exit(bcm963xx_mtd_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Broadcom BCM63xx MTD driver for CFE and RedBoot");
+MODULE_AUTHOR("Daniel Dickinson <openwrt@cshore.neomailbox.net>");
+MODULE_AUTHOR("Florian Fainelli <florian@openwrt.org>");
+MODULE_AUTHOR("Mike Albon <malbon@openwrt.org>");
diff --git a/drivers/mtd/maps/gpio-addr-flash.c b/drivers/mtd/maps/gpio-addr-flash.c
index 32e89d773b4..af5707a8020 100644
--- a/drivers/mtd/maps/gpio-addr-flash.c
+++ b/drivers/mtd/maps/gpio-addr-flash.c
@@ -208,10 +208,14 @@ static int __devinit gpio_flash_probe(struct platform_device *pdev)
if (!state)
return -ENOMEM;
+ /*
+ * We cast start/end to known types in the boards file, so cast
+ * away their pointer types here to the known types (gpios->xxx).
+ */
state->gpio_count = gpios->end;
- state->gpio_addrs = (void *)gpios->start;
+ state->gpio_addrs = (void *)(unsigned long)gpios->start;
state->gpio_values = (void *)(state + 1);
- state->win_size = memory->end - memory->start + 1;
+ state->win_size = resource_size(memory);
memset(state->gpio_values, 0xff, arr_size);
state->map.name = DRIVER_NAME;
@@ -221,7 +225,7 @@ static int __devinit gpio_flash_probe(struct platform_device *pdev)
state->map.copy_to = gf_copy_to;
state->map.bankwidth = pdata->width;
state->map.size = state->win_size * (1 << state->gpio_count);
- state->map.virt = (void __iomem *)memory->start;
+ state->map.virt = ioremap_nocache(memory->start, state->map.size);
state->map.phys = NO_XIP;
state->map.map_priv_1 = (unsigned long)state;
diff --git a/drivers/mtd/maps/pcmciamtd.c b/drivers/mtd/maps/pcmciamtd.c
index 57a1acfe22c..91702294839 100644
--- a/drivers/mtd/maps/pcmciamtd.c
+++ b/drivers/mtd/maps/pcmciamtd.c
@@ -640,10 +640,6 @@ static int pcmciamtd_config(struct pcmcia_device *link)
}
dev_info(&dev->p_dev->dev, "mtd%d: %s\n", mtd->index, mtd->name);
return 0;
-
- dev_err(&dev->p_dev->dev, "CS Error, exiting\n");
- pcmciamtd_release(link);
- return -ENODEV;
}
diff --git a/drivers/mtd/maps/physmap_of.c b/drivers/mtd/maps/physmap_of.c
index ec3edf6e68b..9861814aa02 100644
--- a/drivers/mtd/maps/physmap_of.c
+++ b/drivers/mtd/maps/physmap_of.c
@@ -50,7 +50,7 @@ static int parse_obsolete_partitions(struct platform_device *dev,
{
int i, plen, nr_parts;
const struct {
- u32 offset, len;
+ __be32 offset, len;
} *part;
const char *names;
@@ -69,9 +69,9 @@ static int parse_obsolete_partitions(struct platform_device *dev,
names = of_get_property(dp, "partition-names", &plen);
for (i = 0; i < nr_parts; i++) {
- info->parts[i].offset = part->offset;
- info->parts[i].size = part->len & ~1;
- if (part->len & 1) /* bit 0 set signifies read only partition */
+ info->parts[i].offset = be32_to_cpu(part->offset);
+ info->parts[i].size = be32_to_cpu(part->len) & ~1;
+ if (be32_to_cpu(part->len) & 1) /* bit 0 set signifies read only partition */
info->parts[i].mask_flags = MTD_WRITEABLE;
if (names && (plen > 0)) {
@@ -226,11 +226,11 @@ static int __devinit of_flash_probe(struct platform_device *dev,
struct resource res;
struct of_flash *info;
const char *probe_type = match->data;
- const u32 *width;
+ const __be32 *width;
int err;
int i;
int count;
- const u32 *p;
+ const __be32 *p;
int reg_tuple_size;
struct mtd_info **mtd_list = NULL;
resource_size_t res_size;
@@ -267,9 +267,11 @@ static int __devinit of_flash_probe(struct platform_device *dev,
for (i = 0; i < count; i++) {
err = -ENXIO;
if (of_address_to_resource(dp, i, &res)) {
- dev_err(&dev->dev, "Can't get IO address from device"
- " tree\n");
- goto err_out;
+ /*
+ * Continue with next register tuple if this
+ * one is not mappable
+ */
+ continue;
}
dev_dbg(&dev->dev, "of_flash device: %.8llx-%.8llx\n",
diff --git a/drivers/mtd/mtd_blkdevs.c b/drivers/mtd/mtd_blkdevs.c
index 50ab431b24e..cb20c67995d 100644
--- a/drivers/mtd/mtd_blkdevs.c
+++ b/drivers/mtd/mtd_blkdevs.c
@@ -37,7 +37,6 @@
#include "mtdcore.h"
-static DEFINE_MUTEX(mtd_blkdevs_mutex);
static LIST_HEAD(blktrans_majors);
static DEFINE_MUTEX(blktrans_ref_mutex);
@@ -133,6 +132,10 @@ static int mtd_blktrans_thread(void *arg)
if (!req && !(req = blk_fetch_request(rq))) {
set_current_state(TASK_INTERRUPTIBLE);
+
+ if (kthread_should_stop())
+ set_current_state(TASK_RUNNING);
+
spin_unlock_irq(rq->queue_lock);
schedule();
spin_lock_irq(rq->queue_lock);
@@ -176,54 +179,53 @@ static void mtd_blktrans_request(struct request_queue *rq)
static int blktrans_open(struct block_device *bdev, fmode_t mode)
{
struct mtd_blktrans_dev *dev = blktrans_dev_get(bdev->bd_disk);
- int ret;
+ int ret = 0;
if (!dev)
return -ERESTARTSYS; /* FIXME: busy loop! -arnd*/
- mutex_lock(&mtd_blkdevs_mutex);
mutex_lock(&dev->lock);
- if (!dev->mtd) {
- ret = -ENXIO;
+ if (dev->open++)
goto unlock;
- }
- ret = !dev->open++ && dev->tr->open ? dev->tr->open(dev) : 0;
+ kref_get(&dev->ref);
+ __module_get(dev->tr->owner);
+
+ if (dev->mtd) {
+ ret = dev->tr->open ? dev->tr->open(dev) : 0;
+ __get_mtd_device(dev->mtd);
+ }
- /* Take another reference on the device so it won't go away till
- last release */
- if (!ret)
- kref_get(&dev->ref);
unlock:
mutex_unlock(&dev->lock);
blktrans_dev_put(dev);
- mutex_unlock(&mtd_blkdevs_mutex);
return ret;
}
static int blktrans_release(struct gendisk *disk, fmode_t mode)
{
struct mtd_blktrans_dev *dev = blktrans_dev_get(disk);
- int ret = -ENXIO;
+ int ret = 0;
if (!dev)
return ret;
- mutex_lock(&mtd_blkdevs_mutex);
mutex_lock(&dev->lock);
- /* Release one reference, we sure its not the last one here*/
- kref_put(&dev->ref, blktrans_dev_release);
-
- if (!dev->mtd)
+ if (--dev->open)
goto unlock;
- ret = !--dev->open && dev->tr->release ? dev->tr->release(dev) : 0;
+ kref_put(&dev->ref, blktrans_dev_release);
+ module_put(dev->tr->owner);
+
+ if (dev->mtd) {
+ ret = dev->tr->release ? dev->tr->release(dev) : 0;
+ __put_mtd_device(dev->mtd);
+ }
unlock:
mutex_unlock(&dev->lock);
blktrans_dev_put(dev);
- mutex_unlock(&mtd_blkdevs_mutex);
return ret;
}
@@ -256,7 +258,6 @@ static int blktrans_ioctl(struct block_device *bdev, fmode_t mode,
if (!dev)
return ret;
- mutex_lock(&mtd_blkdevs_mutex);
mutex_lock(&dev->lock);
if (!dev->mtd)
@@ -271,7 +272,6 @@ static int blktrans_ioctl(struct block_device *bdev, fmode_t mode,
}
unlock:
mutex_unlock(&dev->lock);
- mutex_unlock(&mtd_blkdevs_mutex);
blktrans_dev_put(dev);
return ret;
}
@@ -385,9 +385,6 @@ int add_mtd_blktrans_dev(struct mtd_blktrans_dev *new)
gd->queue = new->rq;
- __get_mtd_device(new->mtd);
- __module_get(tr->owner);
-
/* Create processing thread */
/* TODO: workqueue ? */
new->thread = kthread_run(mtd_blktrans_thread, new,
@@ -410,8 +407,6 @@ int add_mtd_blktrans_dev(struct mtd_blktrans_dev *new)
}
return 0;
error4:
- module_put(tr->owner);
- __put_mtd_device(new->mtd);
blk_cleanup_queue(new->rq);
error3:
put_disk(new->disk);
@@ -448,17 +443,15 @@ int del_mtd_blktrans_dev(struct mtd_blktrans_dev *old)
blk_start_queue(old->rq);
spin_unlock_irqrestore(&old->queue_lock, flags);
- /* Ask trans driver for release to the mtd device */
+ /* If the device is currently open, tell trans driver to close it,
+ then put mtd device, and don't touch it again */
mutex_lock(&old->lock);
- if (old->open && old->tr->release) {
- old->tr->release(old);
- old->open = 0;
+ if (old->open) {
+ if (old->tr->release)
+ old->tr->release(old);
+ __put_mtd_device(old->mtd);
}
- __put_mtd_device(old->mtd);
- module_put(old->tr->owner);
-
- /* At that point, we don't touch the mtd anymore */
old->mtd = NULL;
mutex_unlock(&old->lock);
@@ -508,13 +501,16 @@ int register_mtd_blktrans(struct mtd_blktrans_ops *tr)
mutex_lock(&mtd_table_mutex);
ret = register_blkdev(tr->major, tr->name);
- if (ret) {
+ if (ret < 0) {
printk(KERN_WARNING "Unable to register %s block device on major %d: %d\n",
tr->name, tr->major, ret);
mutex_unlock(&mtd_table_mutex);
return ret;
}
+ if (ret)
+ tr->major = ret;
+
tr->blkshift = ffs(tr->blksize) - 1;
INIT_LIST_HEAD(&tr->devs);
diff --git a/drivers/mtd/mtdchar.c b/drivers/mtd/mtdchar.c
index a34a0fe1488..4759d827e8c 100644
--- a/drivers/mtd/mtdchar.c
+++ b/drivers/mtd/mtdchar.c
@@ -30,8 +30,9 @@
#include <linux/backing-dev.h>
#include <linux/compat.h>
#include <linux/mount.h>
-
+#include <linux/blkpg.h>
#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
#include <linux/mtd/map.h>
#include <asm/uaccess.h>
@@ -478,6 +479,78 @@ static int mtd_do_readoob(struct mtd_info *mtd, uint64_t start,
return ret;
}
+/*
+ * Copies (and truncates, if necessary) data from the larger struct,
+ * nand_ecclayout, to the smaller, deprecated layout struct,
+ * nand_ecclayout_user. This is necessary only to suppport the deprecated
+ * API ioctl ECCGETLAYOUT while allowing all new functionality to use
+ * nand_ecclayout flexibly (i.e. the struct may change size in new
+ * releases without requiring major rewrites).
+ */
+static int shrink_ecclayout(const struct nand_ecclayout *from,
+ struct nand_ecclayout_user *to)
+{
+ int i;
+
+ if (!from || !to)
+ return -EINVAL;
+
+ memset(to, 0, sizeof(*to));
+
+ to->eccbytes = min((int)from->eccbytes, MTD_MAX_ECCPOS_ENTRIES);
+ for (i = 0; i < to->eccbytes; i++)
+ to->eccpos[i] = from->eccpos[i];
+
+ for (i = 0; i < MTD_MAX_OOBFREE_ENTRIES; i++) {
+ if (from->oobfree[i].length == 0 &&
+ from->oobfree[i].offset == 0)
+ break;
+ to->oobavail += from->oobfree[i].length;
+ to->oobfree[i] = from->oobfree[i];
+ }
+
+ return 0;
+}
+
+#ifdef CONFIG_MTD_PARTITIONS
+static int mtd_blkpg_ioctl(struct mtd_info *mtd,
+ struct blkpg_ioctl_arg __user *arg)
+{
+ struct blkpg_ioctl_arg a;
+ struct blkpg_partition p;
+
+ if (!capable(CAP_SYS_ADMIN))
+ return -EPERM;
+
+ /* Only master mtd device must be used to control partitions */
+ if (!mtd_is_master(mtd))
+ return -EINVAL;
+
+ if (copy_from_user(&a, arg, sizeof(struct blkpg_ioctl_arg)))
+ return -EFAULT;
+
+ if (copy_from_user(&p, a.data, sizeof(struct blkpg_partition)))
+ return -EFAULT;
+
+ switch (a.op) {
+ case BLKPG_ADD_PARTITION:
+
+ return mtd_add_partition(mtd, p.devname, p.start, p.length);
+
+ case BLKPG_DEL_PARTITION:
+
+ if (p.pno < 0)
+ return -EINVAL;
+
+ return mtd_del_partition(mtd, p.pno);
+
+ default:
+ return -EINVAL;
+ }
+}
+#endif
+
+
static int mtd_ioctl(struct file *file, u_int cmd, u_long arg)
{
struct mtd_file_info *mfi = file->private_data;
@@ -514,6 +587,9 @@ static int mtd_ioctl(struct file *file, u_int cmd, u_long arg)
if (get_user(ur_idx, &(ur->regionindex)))
return -EFAULT;
+ if (ur_idx >= mtd->numeraseregions)
+ return -EINVAL;
+
kr = &(mtd->eraseregions[ur_idx]);
if (put_user(kr->offset, &(ur->offset))
@@ -813,14 +889,23 @@ static int mtd_ioctl(struct file *file, u_int cmd, u_long arg)
}
#endif
+ /* This ioctl is being deprecated - it truncates the ecc layout */
case ECCGETLAYOUT:
{
+ struct nand_ecclayout_user *usrlay;
+
if (!mtd->ecclayout)
return -EOPNOTSUPP;
- if (copy_to_user(argp, mtd->ecclayout,
- sizeof(struct nand_ecclayout)))
- return -EFAULT;
+ usrlay = kmalloc(sizeof(*usrlay), GFP_KERNEL);
+ if (!usrlay)
+ return -ENOMEM;
+
+ shrink_ecclayout(mtd->ecclayout, usrlay);
+
+ if (copy_to_user(argp, usrlay, sizeof(*usrlay)))
+ ret = -EFAULT;
+ kfree(usrlay);
break;
}
@@ -856,6 +941,22 @@ static int mtd_ioctl(struct file *file, u_int cmd, u_long arg)
break;
}
+#ifdef CONFIG_MTD_PARTITIONS
+ case BLKPG:
+ {
+ ret = mtd_blkpg_ioctl(mtd,
+ (struct blkpg_ioctl_arg __user *)arg);
+ break;
+ }
+
+ case BLKRRPART:
+ {
+ /* No reread partition feature. Just return ok */
+ ret = 0;
+ break;
+ }
+#endif
+
default:
ret = -ENOTTY;
}
@@ -1033,7 +1134,7 @@ static const struct file_operations mtd_fops = {
static struct dentry *mtd_inodefs_mount(struct file_system_type *fs_type,
int flags, const char *dev_name, void *data)
{
- return mount_pseudo(fs_type, "mtd_inode:", NULL, MTD_INODE_FS_MAGIC);
+ return mount_pseudo(fs_type, "mtd_inode:", NULL, MTD_INODE_FS_MAGIC);
}
static struct file_system_type mtd_inodefs_type = {
diff --git a/drivers/mtd/mtdpart.c b/drivers/mtd/mtdpart.c
index dc655856887..79e3689f1e1 100644
--- a/drivers/mtd/mtdpart.c
+++ b/drivers/mtd/mtdpart.c
@@ -29,9 +29,11 @@
#include <linux/kmod.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
+#include <linux/err.h>
/* Our partition linked list */
static LIST_HEAD(mtd_partitions);
+static DEFINE_MUTEX(mtd_partitions_mutex);
/* Our partition node structure */
struct mtd_part {
@@ -326,6 +328,12 @@ static int part_block_markbad(struct mtd_info *mtd, loff_t ofs)
return res;
}
+static inline void free_partition(struct mtd_part *p)
+{
+ kfree(p->mtd.name);
+ kfree(p);
+}
+
/*
* This function unregisters and destroy all slave MTD objects which are
* attached to the given master MTD object.
@@ -334,33 +342,42 @@ static int part_block_markbad(struct mtd_info *mtd, loff_t ofs)
int del_mtd_partitions(struct mtd_info *master)
{
struct mtd_part *slave, *next;
+ int ret, err = 0;
+ mutex_lock(&mtd_partitions_mutex);
list_for_each_entry_safe(slave, next, &mtd_partitions, list)
if (slave->master == master) {
+ ret = del_mtd_device(&slave->mtd);
+ if (ret < 0) {
+ err = ret;
+ continue;
+ }
list_del(&slave->list);
- del_mtd_device(&slave->mtd);
- kfree(slave);
+ free_partition(slave);
}
+ mutex_unlock(&mtd_partitions_mutex);
- return 0;
+ return err;
}
EXPORT_SYMBOL(del_mtd_partitions);
-static struct mtd_part *add_one_partition(struct mtd_info *master,
- const struct mtd_partition *part, int partno,
- uint64_t cur_offset)
+static struct mtd_part *allocate_partition(struct mtd_info *master,
+ const struct mtd_partition *part, int partno,
+ uint64_t cur_offset)
{
struct mtd_part *slave;
+ char *name;
/* allocate the partition structure */
slave = kzalloc(sizeof(*slave), GFP_KERNEL);
- if (!slave) {
+ name = kstrdup(part->name, GFP_KERNEL);
+ if (!name || !slave) {
printk(KERN_ERR"memory allocation error while creating partitions for \"%s\"\n",
- master->name);
- del_mtd_partitions(master);
- return NULL;
+ master->name);
+ kfree(name);
+ kfree(slave);
+ return ERR_PTR(-ENOMEM);
}
- list_add(&slave->list, &mtd_partitions);
/* set up the MTD object for this partition */
slave->mtd.type = master->type;
@@ -371,7 +388,7 @@ static struct mtd_part *add_one_partition(struct mtd_info *master,
slave->mtd.oobavail = master->oobavail;
slave->mtd.subpage_sft = master->subpage_sft;
- slave->mtd.name = part->name;
+ slave->mtd.name = name;
slave->mtd.owner = master->owner;
slave->mtd.backing_dev_info = master->backing_dev_info;
@@ -518,12 +535,89 @@ static struct mtd_part *add_one_partition(struct mtd_info *master,
}
out_register:
- /* register our partition */
- add_mtd_device(&slave->mtd);
-
return slave;
}
+int mtd_add_partition(struct mtd_info *master, char *name,
+ long long offset, long long length)
+{
+ struct mtd_partition part;
+ struct mtd_part *p, *new;
+ uint64_t start, end;
+ int ret = 0;
+
+ /* the direct offset is expected */
+ if (offset == MTDPART_OFS_APPEND ||
+ offset == MTDPART_OFS_NXTBLK)
+ return -EINVAL;
+
+ if (length == MTDPART_SIZ_FULL)
+ length = master->size - offset;
+
+ if (length <= 0)
+ return -EINVAL;
+
+ part.name = name;
+ part.size = length;
+ part.offset = offset;
+ part.mask_flags = 0;
+ part.ecclayout = NULL;
+
+ new = allocate_partition(master, &part, -1, offset);
+ if (IS_ERR(new))
+ return PTR_ERR(new);
+
+ start = offset;
+ end = offset + length;
+
+ mutex_lock(&mtd_partitions_mutex);
+ list_for_each_entry(p, &mtd_partitions, list)
+ if (p->master == master) {
+ if ((start >= p->offset) &&
+ (start < (p->offset + p->mtd.size)))
+ goto err_inv;
+
+ if ((end >= p->offset) &&
+ (end < (p->offset + p->mtd.size)))
+ goto err_inv;
+ }
+
+ list_add(&new->list, &mtd_partitions);
+ mutex_unlock(&mtd_partitions_mutex);
+
+ add_mtd_device(&new->mtd);
+
+ return ret;
+err_inv:
+ mutex_unlock(&mtd_partitions_mutex);
+ free_partition(new);
+ return -EINVAL;
+}
+EXPORT_SYMBOL_GPL(mtd_add_partition);
+
+int mtd_del_partition(struct mtd_info *master, int partno)
+{
+ struct mtd_part *slave, *next;
+ int ret = -EINVAL;
+
+ mutex_lock(&mtd_partitions_mutex);
+ list_for_each_entry_safe(slave, next, &mtd_partitions, list)
+ if ((slave->master == master) &&
+ (slave->mtd.index == partno)) {
+ ret = del_mtd_device(&slave->mtd);
+ if (ret < 0)
+ break;
+
+ list_del(&slave->list);
+ free_partition(slave);
+ break;
+ }
+ mutex_unlock(&mtd_partitions_mutex);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(mtd_del_partition);
+
/*
* This function, given a master MTD object and a partition table, creates
* and registers slave MTD objects which are bound to the master according to
@@ -544,9 +638,16 @@ int add_mtd_partitions(struct mtd_info *master,
printk(KERN_NOTICE "Creating %d MTD partitions on \"%s\":\n", nbparts, master->name);
for (i = 0; i < nbparts; i++) {
- slave = add_one_partition(master, parts + i, i, cur_offset);
- if (!slave)
- return -ENOMEM;
+ slave = allocate_partition(master, parts + i, i, cur_offset);
+ if (IS_ERR(slave))
+ return PTR_ERR(slave);
+
+ mutex_lock(&mtd_partitions_mutex);
+ list_add(&slave->list, &mtd_partitions);
+ mutex_unlock(&mtd_partitions_mutex);
+
+ add_mtd_device(&slave->mtd);
+
cur_offset = slave->offset + slave->mtd.size;
}
@@ -618,3 +719,20 @@ int parse_mtd_partitions(struct mtd_info *master, const char **types,
return ret;
}
EXPORT_SYMBOL_GPL(parse_mtd_partitions);
+
+int mtd_is_master(struct mtd_info *mtd)
+{
+ struct mtd_part *part;
+ int nopart = 0;
+
+ mutex_lock(&mtd_partitions_mutex);
+ list_for_each_entry(part, &mtd_partitions, list)
+ if (&part->mtd == mtd) {
+ nopart = 1;
+ break;
+ }
+ mutex_unlock(&mtd_partitions_mutex);
+
+ return nopart;
+}
+EXPORT_SYMBOL_GPL(mtd_is_master);
diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index 8b4b67c8a39..8229802b434 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -400,13 +400,6 @@ config MTD_NAND_PXA3xx
This enables the driver for the NAND flash device found on
PXA3xx processors
-config MTD_NAND_PXA3xx_BUILTIN
- bool "Use builtin definitions for some NAND chips (deprecated)"
- depends on MTD_NAND_PXA3xx
- help
- This enables builtin definitions for some NAND chips. This
- is deprecated in favor of platform specific data.
-
config MTD_NAND_CM_X270
tristate "Support for NAND Flash on CM-X270 modules"
depends on MACH_ARMCORE
@@ -458,6 +451,7 @@ config MTD_NAND_ORION
config MTD_NAND_FSL_ELBC
tristate "NAND support for Freescale eLBC controllers"
depends on PPC_OF
+ select FSL_LBC
help
Various Freescale chips, including the 8313, include a NAND Flash
Controller Module with built-in hardware ECC capabilities.
@@ -531,4 +525,11 @@ config MTD_NAND_JZ4740
help
Enables support for NAND Flash on JZ4740 SoC based boards.
+config MTD_NAND_FSMC
+ tristate "Support for NAND on ST Micros FSMC"
+ depends on PLAT_SPEAR || PLAT_NOMADIK || MACH_U300
+ help
+ Enables support for NAND Flash chips on the ST Microelectronics
+ Flexible Static Memory Controller (FSMC)
+
endif # MTD_NAND
diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile
index ac83dcdac5d..8ad6faec72c 100644
--- a/drivers/mtd/nand/Makefile
+++ b/drivers/mtd/nand/Makefile
@@ -19,6 +19,7 @@ obj-$(CONFIG_MTD_NAND_PPCHAMELEONEVB) += ppchameleonevb.o
obj-$(CONFIG_MTD_NAND_S3C2410) += s3c2410.o
obj-$(CONFIG_MTD_NAND_DAVINCI) += davinci_nand.o
obj-$(CONFIG_MTD_NAND_DISKONCHIP) += diskonchip.o
+obj-$(CONFIG_MTD_NAND_FSMC) += fsmc_nand.o
obj-$(CONFIG_MTD_NAND_H1900) += h1910.o
obj-$(CONFIG_MTD_NAND_RTC_FROM4) += rtc_from4.o
obj-$(CONFIG_MTD_NAND_SHARPSL) += sharpsl.o
diff --git a/drivers/mtd/nand/bf5xx_nand.c b/drivers/mtd/nand/bf5xx_nand.c
index 6fbeefa3a76..79947bea4d5 100644
--- a/drivers/mtd/nand/bf5xx_nand.c
+++ b/drivers/mtd/nand/bf5xx_nand.c
@@ -110,15 +110,6 @@ static const unsigned short bfin_nfc_pin_req[] =
0};
#ifdef CONFIG_MTD_NAND_BF5XX_BOOTROM_ECC
-static uint8_t bbt_pattern[] = { 0xff };
-
-static struct nand_bbt_descr bootrom_bbt = {
- .options = 0,
- .offs = 63,
- .len = 1,
- .pattern = bbt_pattern,
-};
-
static struct nand_ecclayout bootrom_ecclayout = {
.eccbytes = 24,
.eccpos = {
@@ -809,7 +800,6 @@ static int __devinit bf5xx_nand_probe(struct platform_device *pdev)
/* setup hardware ECC data struct */
if (hardware_ecc) {
#ifdef CONFIG_MTD_NAND_BF5XX_BOOTROM_ECC
- chip->badblock_pattern = &bootrom_bbt;
chip->ecc.layout = &bootrom_ecclayout;
#endif
chip->read_buf = bf5xx_nand_dma_read_buf;
@@ -830,6 +820,10 @@ static int __devinit bf5xx_nand_probe(struct platform_device *pdev)
goto out_err_nand_scan;
}
+#ifdef CONFIG_MTD_NAND_BF5XX_BOOTROM_ECC
+ chip->badblockpos = 63;
+#endif
+
/* add NAND partition */
bf5xx_nand_add_partition(info);
diff --git a/drivers/mtd/nand/davinci_nand.c b/drivers/mtd/nand/davinci_nand.c
index 8beb0d0233b..a90fde3ede2 100644
--- a/drivers/mtd/nand/davinci_nand.c
+++ b/drivers/mtd/nand/davinci_nand.c
@@ -316,7 +316,7 @@ static int nand_davinci_correct_4bit(struct mtd_info *mtd,
u32 syndrome[4];
u32 ecc_state;
unsigned num_errors, corrected;
- unsigned long timeo = jiffies + msecs_to_jiffies(100);
+ unsigned long timeo;
/* All bytes 0xff? It's an erased page; ignore its ECC. */
for (i = 0; i < 10; i++) {
@@ -372,9 +372,11 @@ compare:
* after setting the 4BITECC_ADD_CALC_START bit. So if you immediately
* begin trying to poll for the state, you may fall right out of your
* loop without any of the correction calculations having taken place.
- * The recommendation from the hardware team is to wait till ECC_STATE
- * reads less than 4, which means ECC HW has entered correction state.
+ * The recommendation from the hardware team is to initially delay as
+ * long as ECC_STATE reads less than 4. After that, ECC HW has entered
+ * correction state.
*/
+ timeo = jiffies + usecs_to_jiffies(100);
do {
ecc_state = (davinci_nand_readl(info,
NANDFSR_OFFSET) >> 8) & 0x0f;
@@ -733,6 +735,9 @@ static int __init nand_davinci_probe(struct platform_device *pdev)
* breaks userspace ioctl interface with mtd-utils. Once we
* resolve this issue, NAND_ECC_HW_OOB_FIRST mode can be used
* for the 4KiB page chips.
+ *
+ * TODO: Note that nand_ecclayout has now been expanded and can
+ * hold plenty of OOB entries.
*/
dev_warn(&pdev->dev, "no 4-bit ECC support yet "
"for 4KiB-page NAND\n");
diff --git a/drivers/mtd/nand/denali.c b/drivers/mtd/nand/denali.c
index 532fe07cf88..8c8d3c86c0e 100644
--- a/drivers/mtd/nand/denali.c
+++ b/drivers/mtd/nand/denali.c
@@ -1292,6 +1292,7 @@ static void denali_cmdfunc(struct mtd_info *mtd, unsigned int cmd, int col,
read_status(denali);
break;
case NAND_CMD_READID:
+ case NAND_CMD_PARAM:
reset_buf(denali);
/*sometimes ManufactureId read from register is not right
* e.g. some of Micron MT29F32G08QAA MLC NAND chips
diff --git a/drivers/mtd/nand/fsl_elbc_nand.c b/drivers/mtd/nand/fsl_elbc_nand.c
index 80de0bff6c3..c141b07b25d 100644
--- a/drivers/mtd/nand/fsl_elbc_nand.c
+++ b/drivers/mtd/nand/fsl_elbc_nand.c
@@ -1,9 +1,11 @@
/* Freescale Enhanced Local Bus Controller NAND driver
*
- * Copyright (c) 2006-2007 Freescale Semiconductor
+ * Copyright © 2006-2007, 2010 Freescale Semiconductor
*
* Authors: Nick Spence <nick.spence@freescale.com>,
* Scott Wood <scottwood@freescale.com>
+ * Jack Lan <jack.lan@freescale.com>
+ * Roy Zang <tie-fei.zang@freescale.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -27,6 +29,7 @@
#include <linux/string.h>
#include <linux/ioport.h>
#include <linux/of_platform.h>
+#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/interrupt.h>
@@ -42,14 +45,12 @@
#define ERR_BYTE 0xFF /* Value returned for read bytes when read failed */
#define FCM_TIMEOUT_MSECS 500 /* Maximum number of mSecs to wait for FCM */
-struct fsl_elbc_ctrl;
-
/* mtd information per set */
struct fsl_elbc_mtd {
struct mtd_info mtd;
struct nand_chip chip;
- struct fsl_elbc_ctrl *ctrl;
+ struct fsl_lbc_ctrl *ctrl;
struct device *dev;
int bank; /* Chip select bank number */
@@ -58,18 +59,12 @@ struct fsl_elbc_mtd {
unsigned int fmr; /* FCM Flash Mode Register value */
};
-/* overview of the fsl elbc controller */
+/* Freescale eLBC FCM controller infomation */
-struct fsl_elbc_ctrl {
+struct fsl_elbc_fcm_ctrl {
struct nand_hw_control controller;
struct fsl_elbc_mtd *chips[MAX_BANKS];
- /* device info */
- struct device *dev;
- struct fsl_lbc_regs __iomem *regs;
- int irq;
- wait_queue_head_t irq_wait;
- unsigned int irq_status; /* status read from LTESR by irq handler */
u8 __iomem *addr; /* Address of assigned FCM buffer */
unsigned int page; /* Last page written to / read from */
unsigned int read_bytes; /* Number of bytes read during command */
@@ -79,6 +74,7 @@ struct fsl_elbc_ctrl {
unsigned int mdr; /* UPM/FCM Data Register value */
unsigned int use_mdr; /* Non zero if the MDR is to be set */
unsigned int oob; /* Non zero if operating on OOB data */
+ unsigned int counter; /* counter for the initializations */
char *oob_poi; /* Place to write ECC after read back */
};
@@ -164,11 +160,12 @@ static void set_addr(struct mtd_info *mtd, int column, int page_addr, int oob)
{
struct nand_chip *chip = mtd->priv;
struct fsl_elbc_mtd *priv = chip->priv;
- struct fsl_elbc_ctrl *ctrl = priv->ctrl;
+ struct fsl_lbc_ctrl *ctrl = priv->ctrl;
struct fsl_lbc_regs __iomem *lbc = ctrl->regs;
+ struct fsl_elbc_fcm_ctrl *elbc_fcm_ctrl = ctrl->nand;
int buf_num;
- ctrl->page = page_addr;
+ elbc_fcm_ctrl->page = page_addr;
out_be32(&lbc->fbar,
page_addr >> (chip->phys_erase_shift - chip->page_shift));
@@ -185,16 +182,18 @@ static void set_addr(struct mtd_info *mtd, int column, int page_addr, int oob)
buf_num = page_addr & 7;
}
- ctrl->addr = priv->vbase + buf_num * 1024;
- ctrl->index = column;
+ elbc_fcm_ctrl->addr = priv->vbase + buf_num * 1024;
+ elbc_fcm_ctrl->index = column;
/* for OOB data point to the second half of the buffer */
if (oob)
- ctrl->index += priv->page_size ? 2048 : 512;
+ elbc_fcm_ctrl->index += priv->page_size ? 2048 : 512;
- dev_vdbg(ctrl->dev, "set_addr: bank=%d, ctrl->addr=0x%p (0x%p), "
+ dev_vdbg(priv->dev, "set_addr: bank=%d, "
+ "elbc_fcm_ctrl->addr=0x%p (0x%p), "
"index %x, pes %d ps %d\n",
- buf_num, ctrl->addr, priv->vbase, ctrl->index,
+ buf_num, elbc_fcm_ctrl->addr, priv->vbase,
+ elbc_fcm_ctrl->index,
chip->phys_erase_shift, chip->page_shift);
}
@@ -205,18 +204,19 @@ static int fsl_elbc_run_command(struct mtd_info *mtd)
{
struct nand_chip *chip = mtd->priv;
struct fsl_elbc_mtd *priv = chip->priv;
- struct fsl_elbc_ctrl *ctrl = priv->ctrl;
+ struct fsl_lbc_ctrl *ctrl = priv->ctrl;
+ struct fsl_elbc_fcm_ctrl *elbc_fcm_ctrl = ctrl->nand;
struct fsl_lbc_regs __iomem *lbc = ctrl->regs;
/* Setup the FMR[OP] to execute without write protection */
out_be32(&lbc->fmr, priv->fmr | 3);
- if (ctrl->use_mdr)
- out_be32(&lbc->mdr, ctrl->mdr);
+ if (elbc_fcm_ctrl->use_mdr)
+ out_be32(&lbc->mdr, elbc_fcm_ctrl->mdr);
- dev_vdbg(ctrl->dev,
+ dev_vdbg(priv->dev,
"fsl_elbc_run_command: fmr=%08x fir=%08x fcr=%08x\n",
in_be32(&lbc->fmr), in_be32(&lbc->fir), in_be32(&lbc->fcr));
- dev_vdbg(ctrl->dev,
+ dev_vdbg(priv->dev,
"fsl_elbc_run_command: fbar=%08x fpar=%08x "
"fbcr=%08x bank=%d\n",
in_be32(&lbc->fbar), in_be32(&lbc->fpar),
@@ -229,19 +229,18 @@ static int fsl_elbc_run_command(struct mtd_info *mtd)
/* wait for FCM complete flag or timeout */
wait_event_timeout(ctrl->irq_wait, ctrl->irq_status,
FCM_TIMEOUT_MSECS * HZ/1000);
- ctrl->status = ctrl->irq_status;
-
+ elbc_fcm_ctrl->status = ctrl->irq_status;
/* store mdr value in case it was needed */
- if (ctrl->use_mdr)
- ctrl->mdr = in_be32(&lbc->mdr);
+ if (elbc_fcm_ctrl->use_mdr)
+ elbc_fcm_ctrl->mdr = in_be32(&lbc->mdr);
- ctrl->use_mdr = 0;
+ elbc_fcm_ctrl->use_mdr = 0;
- if (ctrl->status != LTESR_CC) {
- dev_info(ctrl->dev,
+ if (elbc_fcm_ctrl->status != LTESR_CC) {
+ dev_info(priv->dev,
"command failed: fir %x fcr %x status %x mdr %x\n",
in_be32(&lbc->fir), in_be32(&lbc->fcr),
- ctrl->status, ctrl->mdr);
+ elbc_fcm_ctrl->status, elbc_fcm_ctrl->mdr);
return -EIO;
}
@@ -251,7 +250,7 @@ static int fsl_elbc_run_command(struct mtd_info *mtd)
static void fsl_elbc_do_read(struct nand_chip *chip, int oob)
{
struct fsl_elbc_mtd *priv = chip->priv;
- struct fsl_elbc_ctrl *ctrl = priv->ctrl;
+ struct fsl_lbc_ctrl *ctrl = priv->ctrl;
struct fsl_lbc_regs __iomem *lbc = ctrl->regs;
if (priv->page_size) {
@@ -284,15 +283,16 @@ static void fsl_elbc_cmdfunc(struct mtd_info *mtd, unsigned int command,
{
struct nand_chip *chip = mtd->priv;
struct fsl_elbc_mtd *priv = chip->priv;
- struct fsl_elbc_ctrl *ctrl = priv->ctrl;
+ struct fsl_lbc_ctrl *ctrl = priv->ctrl;
+ struct fsl_elbc_fcm_ctrl *elbc_fcm_ctrl = ctrl->nand;
struct fsl_lbc_regs __iomem *lbc = ctrl->regs;
- ctrl->use_mdr = 0;
+ elbc_fcm_ctrl->use_mdr = 0;
/* clear the read buffer */
- ctrl->read_bytes = 0;
+ elbc_fcm_ctrl->read_bytes = 0;
if (command != NAND_CMD_PAGEPROG)
- ctrl->index = 0;
+ elbc_fcm_ctrl->index = 0;
switch (command) {
/* READ0 and READ1 read the entire buffer to use hardware ECC. */
@@ -301,7 +301,7 @@ static void fsl_elbc_cmdfunc(struct mtd_info *mtd, unsigned int command,
/* fall-through */
case NAND_CMD_READ0:
- dev_dbg(ctrl->dev,
+ dev_dbg(priv->dev,
"fsl_elbc_cmdfunc: NAND_CMD_READ0, page_addr:"
" 0x%x, column: 0x%x.\n", page_addr, column);
@@ -309,8 +309,8 @@ static void fsl_elbc_cmdfunc(struct mtd_info *mtd, unsigned int command,
out_be32(&lbc->fbcr, 0); /* read entire page to enable ECC */
set_addr(mtd, 0, page_addr, 0);
- ctrl->read_bytes = mtd->writesize + mtd->oobsize;
- ctrl->index += column;
+ elbc_fcm_ctrl->read_bytes = mtd->writesize + mtd->oobsize;
+ elbc_fcm_ctrl->index += column;
fsl_elbc_do_read(chip, 0);
fsl_elbc_run_command(mtd);
@@ -318,14 +318,14 @@ static void fsl_elbc_cmdfunc(struct mtd_info *mtd, unsigned int command,
/* READOOB reads only the OOB because no ECC is performed. */
case NAND_CMD_READOOB:
- dev_vdbg(ctrl->dev,
+ dev_vdbg(priv->dev,
"fsl_elbc_cmdfunc: NAND_CMD_READOOB, page_addr:"
" 0x%x, column: 0x%x.\n", page_addr, column);
out_be32(&lbc->fbcr, mtd->oobsize - column);
set_addr(mtd, column, page_addr, 1);
- ctrl->read_bytes = mtd->writesize + mtd->oobsize;
+ elbc_fcm_ctrl->read_bytes = mtd->writesize + mtd->oobsize;
fsl_elbc_do_read(chip, 1);
fsl_elbc_run_command(mtd);
@@ -333,7 +333,7 @@ static void fsl_elbc_cmdfunc(struct mtd_info *mtd, unsigned int command,
/* READID must read all 5 possible bytes while CEB is active */
case NAND_CMD_READID:
- dev_vdbg(ctrl->dev, "fsl_elbc_cmdfunc: NAND_CMD_READID.\n");
+ dev_vdbg(priv->dev, "fsl_elbc_cmdfunc: NAND_CMD_READID.\n");
out_be32(&lbc->fir, (FIR_OP_CM0 << FIR_OP0_SHIFT) |
(FIR_OP_UA << FIR_OP1_SHIFT) |
@@ -341,9 +341,9 @@ static void fsl_elbc_cmdfunc(struct mtd_info *mtd, unsigned int command,
out_be32(&lbc->fcr, NAND_CMD_READID << FCR_CMD0_SHIFT);
/* 5 bytes for manuf, device and exts */
out_be32(&lbc->fbcr, 5);
- ctrl->read_bytes = 5;
- ctrl->use_mdr = 1;
- ctrl->mdr = 0;
+ elbc_fcm_ctrl->read_bytes = 5;
+ elbc_fcm_ctrl->use_mdr = 1;
+ elbc_fcm_ctrl->mdr = 0;
set_addr(mtd, 0, 0, 0);
fsl_elbc_run_command(mtd);
@@ -351,7 +351,7 @@ static void fsl_elbc_cmdfunc(struct mtd_info *mtd, unsigned int command,
/* ERASE1 stores the block and page address */
case NAND_CMD_ERASE1:
- dev_vdbg(ctrl->dev,
+ dev_vdbg(priv->dev,
"fsl_elbc_cmdfunc: NAND_CMD_ERASE1, "
"page_addr: 0x%x.\n", page_addr);
set_addr(mtd, 0, page_addr, 0);
@@ -359,7 +359,7 @@ static void fsl_elbc_cmdfunc(struct mtd_info *mtd, unsigned int command,
/* ERASE2 uses the block and page address from ERASE1 */
case NAND_CMD_ERASE2:
- dev_vdbg(ctrl->dev, "fsl_elbc_cmdfunc: NAND_CMD_ERASE2.\n");
+ dev_vdbg(priv->dev, "fsl_elbc_cmdfunc: NAND_CMD_ERASE2.\n");
out_be32(&lbc->fir,
(FIR_OP_CM0 << FIR_OP0_SHIFT) |
@@ -374,8 +374,8 @@ static void fsl_elbc_cmdfunc(struct mtd_info *mtd, unsigned int command,
(NAND_CMD_ERASE2 << FCR_CMD2_SHIFT));
out_be32(&lbc->fbcr, 0);
- ctrl->read_bytes = 0;
- ctrl->use_mdr = 1;
+ elbc_fcm_ctrl->read_bytes = 0;
+ elbc_fcm_ctrl->use_mdr = 1;
fsl_elbc_run_command(mtd);
return;
@@ -383,14 +383,12 @@ static void fsl_elbc_cmdfunc(struct mtd_info *mtd, unsigned int command,
/* SEQIN sets up the addr buffer and all registers except the length */
case NAND_CMD_SEQIN: {
__be32 fcr;
- dev_vdbg(ctrl->dev,
- "fsl_elbc_cmdfunc: NAND_CMD_SEQIN/PAGE_PROG, "
+ dev_vdbg(priv->dev,
+ "fsl_elbc_cmdfunc: NAND_CMD_SEQIN/PAGE_PROG, "
"page_addr: 0x%x, column: 0x%x.\n",
page_addr, column);
- ctrl->column = column;
- ctrl->oob = 0;
- ctrl->use_mdr = 1;
+ elbc_fcm_ctrl->use_mdr = 1;
fcr = (NAND_CMD_STATUS << FCR_CMD1_SHIFT) |
(NAND_CMD_SEQIN << FCR_CMD2_SHIFT) |
@@ -420,7 +418,7 @@ static void fsl_elbc_cmdfunc(struct mtd_info *mtd, unsigned int command,
/* OOB area --> READOOB */
column -= mtd->writesize;
fcr |= NAND_CMD_READOOB << FCR_CMD0_SHIFT;
- ctrl->oob = 1;
+ elbc_fcm_ctrl->oob = 1;
} else {
WARN_ON(column != 0);
/* First 256 bytes --> READ0 */
@@ -429,24 +427,24 @@ static void fsl_elbc_cmdfunc(struct mtd_info *mtd, unsigned int command,
}
out_be32(&lbc->fcr, fcr);
- set_addr(mtd, column, page_addr, ctrl->oob);
+ set_addr(mtd, column, page_addr, elbc_fcm_ctrl->oob);
return;
}
/* PAGEPROG reuses all of the setup from SEQIN and adds the length */
case NAND_CMD_PAGEPROG: {
int full_page;
- dev_vdbg(ctrl->dev,
+ dev_vdbg(priv->dev,
"fsl_elbc_cmdfunc: NAND_CMD_PAGEPROG "
- "writing %d bytes.\n", ctrl->index);
+ "writing %d bytes.\n", elbc_fcm_ctrl->index);
/* if the write did not start at 0 or is not a full page
* then set the exact length, otherwise use a full page
* write so the HW generates the ECC.
*/
- if (ctrl->oob || ctrl->column != 0 ||
- ctrl->index != mtd->writesize + mtd->oobsize) {
- out_be32(&lbc->fbcr, ctrl->index);
+ if (elbc_fcm_ctrl->oob || elbc_fcm_ctrl->column != 0 ||
+ elbc_fcm_ctrl->index != mtd->writesize + mtd->oobsize) {
+ out_be32(&lbc->fbcr, elbc_fcm_ctrl->index);
full_page = 0;
} else {
out_be32(&lbc->fbcr, 0);
@@ -458,21 +456,21 @@ static void fsl_elbc_cmdfunc(struct mtd_info *mtd, unsigned int command,
/* Read back the page in order to fill in the ECC for the
* caller. Is this really needed?
*/
- if (full_page && ctrl->oob_poi) {
+ if (full_page && elbc_fcm_ctrl->oob_poi) {
out_be32(&lbc->fbcr, 3);
set_addr(mtd, 6, page_addr, 1);
- ctrl->read_bytes = mtd->writesize + 9;
+ elbc_fcm_ctrl->read_bytes = mtd->writesize + 9;
fsl_elbc_do_read(chip, 1);
fsl_elbc_run_command(mtd);
- memcpy_fromio(ctrl->oob_poi + 6,
- &ctrl->addr[ctrl->index], 3);
- ctrl->index += 3;
+ memcpy_fromio(elbc_fcm_ctrl->oob_poi + 6,
+ &elbc_fcm_ctrl->addr[elbc_fcm_ctrl->index], 3);
+ elbc_fcm_ctrl->index += 3;
}
- ctrl->oob_poi = NULL;
+ elbc_fcm_ctrl->oob_poi = NULL;
return;
}
@@ -485,26 +483,26 @@ static void fsl_elbc_cmdfunc(struct mtd_info *mtd, unsigned int command,
out_be32(&lbc->fcr, NAND_CMD_STATUS << FCR_CMD0_SHIFT);
out_be32(&lbc->fbcr, 1);
set_addr(mtd, 0, 0, 0);
- ctrl->read_bytes = 1;
+ elbc_fcm_ctrl->read_bytes = 1;
fsl_elbc_run_command(mtd);
/* The chip always seems to report that it is
* write-protected, even when it is not.
*/
- setbits8(ctrl->addr, NAND_STATUS_WP);
+ setbits8(elbc_fcm_ctrl->addr, NAND_STATUS_WP);
return;
/* RESET without waiting for the ready line */
case NAND_CMD_RESET:
- dev_dbg(ctrl->dev, "fsl_elbc_cmdfunc: NAND_CMD_RESET.\n");
+ dev_dbg(priv->dev, "fsl_elbc_cmdfunc: NAND_CMD_RESET.\n");
out_be32(&lbc->fir, FIR_OP_CM0 << FIR_OP0_SHIFT);
out_be32(&lbc->fcr, NAND_CMD_RESET << FCR_CMD0_SHIFT);
fsl_elbc_run_command(mtd);
return;
default:
- dev_err(ctrl->dev,
+ dev_err(priv->dev,
"fsl_elbc_cmdfunc: error, unsupported command 0x%x.\n",
command);
}
@@ -524,24 +522,24 @@ static void fsl_elbc_write_buf(struct mtd_info *mtd, const u8 *buf, int len)
{
struct nand_chip *chip = mtd->priv;
struct fsl_elbc_mtd *priv = chip->priv;
- struct fsl_elbc_ctrl *ctrl = priv->ctrl;
+ struct fsl_elbc_fcm_ctrl *elbc_fcm_ctrl = priv->ctrl->nand;
unsigned int bufsize = mtd->writesize + mtd->oobsize;
if (len <= 0) {
- dev_err(ctrl->dev, "write_buf of %d bytes", len);
- ctrl->status = 0;
+ dev_err(priv->dev, "write_buf of %d bytes", len);
+ elbc_fcm_ctrl->status = 0;
return;
}
- if ((unsigned int)len > bufsize - ctrl->index) {
- dev_err(ctrl->dev,
+ if ((unsigned int)len > bufsize - elbc_fcm_ctrl->index) {
+ dev_err(priv->dev,
"write_buf beyond end of buffer "
"(%d requested, %u available)\n",
- len, bufsize - ctrl->index);
- len = bufsize - ctrl->index;
+ len, bufsize - elbc_fcm_ctrl->index);
+ len = bufsize - elbc_fcm_ctrl->index;
}
- memcpy_toio(&ctrl->addr[ctrl->index], buf, len);
+ memcpy_toio(&elbc_fcm_ctrl->addr[elbc_fcm_ctrl->index], buf, len);
/*
* This is workaround for the weird elbc hangs during nand write,
* Scott Wood says: "...perhaps difference in how long it takes a
@@ -549,9 +547,9 @@ static void fsl_elbc_write_buf(struct mtd_info *mtd, const u8 *buf, int len)
* is causing problems, and sync isn't helping for some reason."
* Reading back the last byte helps though.
*/
- in_8(&ctrl->addr[ctrl->index] + len - 1);
+ in_8(&elbc_fcm_ctrl->addr[elbc_fcm_ctrl->index] + len - 1);
- ctrl->index += len;
+ elbc_fcm_ctrl->index += len;
}
/*
@@ -562,13 +560,13 @@ static u8 fsl_elbc_read_byte(struct mtd_info *mtd)
{
struct nand_chip *chip = mtd->priv;
struct fsl_elbc_mtd *priv = chip->priv;
- struct fsl_elbc_ctrl *ctrl = priv->ctrl;
+ struct fsl_elbc_fcm_ctrl *elbc_fcm_ctrl = priv->ctrl->nand;
/* If there are still bytes in the FCM, then use the next byte. */
- if (ctrl->index < ctrl->read_bytes)
- return in_8(&ctrl->addr[ctrl->index++]);
+ if (elbc_fcm_ctrl->index < elbc_fcm_ctrl->read_bytes)
+ return in_8(&elbc_fcm_ctrl->addr[elbc_fcm_ctrl->index++]);
- dev_err(ctrl->dev, "read_byte beyond end of buffer\n");
+ dev_err(priv->dev, "read_byte beyond end of buffer\n");
return ERR_BYTE;
}
@@ -579,18 +577,19 @@ static void fsl_elbc_read_buf(struct mtd_info *mtd, u8 *buf, int len)
{
struct nand_chip *chip = mtd->priv;
struct fsl_elbc_mtd *priv = chip->priv;
- struct fsl_elbc_ctrl *ctrl = priv->ctrl;
+ struct fsl_elbc_fcm_ctrl *elbc_fcm_ctrl = priv->ctrl->nand;
int avail;
if (len < 0)
return;
- avail = min((unsigned int)len, ctrl->read_bytes - ctrl->index);
- memcpy_fromio(buf, &ctrl->addr[ctrl->index], avail);
- ctrl->index += avail;
+ avail = min((unsigned int)len,
+ elbc_fcm_ctrl->read_bytes - elbc_fcm_ctrl->index);
+ memcpy_fromio(buf, &elbc_fcm_ctrl->addr[elbc_fcm_ctrl->index], avail);
+ elbc_fcm_ctrl->index += avail;
if (len > avail)
- dev_err(ctrl->dev,
+ dev_err(priv->dev,
"read_buf beyond end of buffer "
"(%d requested, %d available)\n",
len, avail);
@@ -603,30 +602,32 @@ static int fsl_elbc_verify_buf(struct mtd_info *mtd, const u_char *buf, int len)
{
struct nand_chip *chip = mtd->priv;
struct fsl_elbc_mtd *priv = chip->priv;
- struct fsl_elbc_ctrl *ctrl = priv->ctrl;
+ struct fsl_elbc_fcm_ctrl *elbc_fcm_ctrl = priv->ctrl->nand;
int i;
if (len < 0) {
- dev_err(ctrl->dev, "write_buf of %d bytes", len);
+ dev_err(priv->dev, "write_buf of %d bytes", len);
return -EINVAL;
}
- if ((unsigned int)len > ctrl->read_bytes - ctrl->index) {
- dev_err(ctrl->dev,
- "verify_buf beyond end of buffer "
- "(%d requested, %u available)\n",
- len, ctrl->read_bytes - ctrl->index);
+ if ((unsigned int)len >
+ elbc_fcm_ctrl->read_bytes - elbc_fcm_ctrl->index) {
+ dev_err(priv->dev,
+ "verify_buf beyond end of buffer "
+ "(%d requested, %u available)\n",
+ len, elbc_fcm_ctrl->read_bytes - elbc_fcm_ctrl->index);
- ctrl->index = ctrl->read_bytes;
+ elbc_fcm_ctrl->index = elbc_fcm_ctrl->read_bytes;
return -EINVAL;
}
for (i = 0; i < len; i++)
- if (in_8(&ctrl->addr[ctrl->index + i]) != buf[i])
+ if (in_8(&elbc_fcm_ctrl->addr[elbc_fcm_ctrl->index + i])
+ != buf[i])
break;
- ctrl->index += len;
- return i == len && ctrl->status == LTESR_CC ? 0 : -EIO;
+ elbc_fcm_ctrl->index += len;
+ return i == len && elbc_fcm_ctrl->status == LTESR_CC ? 0 : -EIO;
}
/* This function is called after Program and Erase Operations to
@@ -635,22 +636,22 @@ static int fsl_elbc_verify_buf(struct mtd_info *mtd, const u_char *buf, int len)
static int fsl_elbc_wait(struct mtd_info *mtd, struct nand_chip *chip)
{
struct fsl_elbc_mtd *priv = chip->priv;
- struct fsl_elbc_ctrl *ctrl = priv->ctrl;
+ struct fsl_elbc_fcm_ctrl *elbc_fcm_ctrl = priv->ctrl->nand;
- if (ctrl->status != LTESR_CC)
+ if (elbc_fcm_ctrl->status != LTESR_CC)
return NAND_STATUS_FAIL;
/* The chip always seems to report that it is
* write-protected, even when it is not.
*/
- return (ctrl->mdr & 0xff) | NAND_STATUS_WP;
+ return (elbc_fcm_ctrl->mdr & 0xff) | NAND_STATUS_WP;
}
static int fsl_elbc_chip_init_tail(struct mtd_info *mtd)
{
struct nand_chip *chip = mtd->priv;
struct fsl_elbc_mtd *priv = chip->priv;
- struct fsl_elbc_ctrl *ctrl = priv->ctrl;
+ struct fsl_lbc_ctrl *ctrl = priv->ctrl;
struct fsl_lbc_regs __iomem *lbc = ctrl->regs;
unsigned int al;
@@ -665,41 +666,41 @@ static int fsl_elbc_chip_init_tail(struct mtd_info *mtd)
priv->fmr |= (12 << FMR_CWTO_SHIFT) | /* Timeout > 12 ms */
(al << FMR_AL_SHIFT);
- dev_dbg(ctrl->dev, "fsl_elbc_init: nand->numchips = %d\n",
+ dev_dbg(priv->dev, "fsl_elbc_init: nand->numchips = %d\n",
chip->numchips);
- dev_dbg(ctrl->dev, "fsl_elbc_init: nand->chipsize = %lld\n",
+ dev_dbg(priv->dev, "fsl_elbc_init: nand->chipsize = %lld\n",
chip->chipsize);
- dev_dbg(ctrl->dev, "fsl_elbc_init: nand->pagemask = %8x\n",
+ dev_dbg(priv->dev, "fsl_elbc_init: nand->pagemask = %8x\n",
chip->pagemask);
- dev_dbg(ctrl->dev, "fsl_elbc_init: nand->chip_delay = %d\n",
+ dev_dbg(priv->dev, "fsl_elbc_init: nand->chip_delay = %d\n",
chip->chip_delay);
- dev_dbg(ctrl->dev, "fsl_elbc_init: nand->badblockpos = %d\n",
+ dev_dbg(priv->dev, "fsl_elbc_init: nand->badblockpos = %d\n",
chip->badblockpos);
- dev_dbg(ctrl->dev, "fsl_elbc_init: nand->chip_shift = %d\n",
+ dev_dbg(priv->dev, "fsl_elbc_init: nand->chip_shift = %d\n",
chip->chip_shift);
- dev_dbg(ctrl->dev, "fsl_elbc_init: nand->page_shift = %d\n",
+ dev_dbg(priv->dev, "fsl_elbc_init: nand->page_shift = %d\n",
chip->page_shift);
- dev_dbg(ctrl->dev, "fsl_elbc_init: nand->phys_erase_shift = %d\n",
+ dev_dbg(priv->dev, "fsl_elbc_init: nand->phys_erase_shift = %d\n",
chip->phys_erase_shift);
- dev_dbg(ctrl->dev, "fsl_elbc_init: nand->ecclayout = %p\n",
+ dev_dbg(priv->dev, "fsl_elbc_init: nand->ecclayout = %p\n",
chip->ecclayout);
- dev_dbg(ctrl->dev, "fsl_elbc_init: nand->ecc.mode = %d\n",
+ dev_dbg(priv->dev, "fsl_elbc_init: nand->ecc.mode = %d\n",
chip->ecc.mode);
- dev_dbg(ctrl->dev, "fsl_elbc_init: nand->ecc.steps = %d\n",
+ dev_dbg(priv->dev, "fsl_elbc_init: nand->ecc.steps = %d\n",
chip->ecc.steps);
- dev_dbg(ctrl->dev, "fsl_elbc_init: nand->ecc.bytes = %d\n",
+ dev_dbg(priv->dev, "fsl_elbc_init: nand->ecc.bytes = %d\n",
chip->ecc.bytes);
- dev_dbg(ctrl->dev, "fsl_elbc_init: nand->ecc.total = %d\n",
+ dev_dbg(priv->dev, "fsl_elbc_init: nand->ecc.total = %d\n",
chip->ecc.total);
- dev_dbg(ctrl->dev, "fsl_elbc_init: nand->ecc.layout = %p\n",
+ dev_dbg(priv->dev, "fsl_elbc_init: nand->ecc.layout = %p\n",
chip->ecc.layout);
- dev_dbg(ctrl->dev, "fsl_elbc_init: mtd->flags = %08x\n", mtd->flags);
- dev_dbg(ctrl->dev, "fsl_elbc_init: mtd->size = %lld\n", mtd->size);
- dev_dbg(ctrl->dev, "fsl_elbc_init: mtd->erasesize = %d\n",
+ dev_dbg(priv->dev, "fsl_elbc_init: mtd->flags = %08x\n", mtd->flags);
+ dev_dbg(priv->dev, "fsl_elbc_init: mtd->size = %lld\n", mtd->size);
+ dev_dbg(priv->dev, "fsl_elbc_init: mtd->erasesize = %d\n",
mtd->erasesize);
- dev_dbg(ctrl->dev, "fsl_elbc_init: mtd->writesize = %d\n",
+ dev_dbg(priv->dev, "fsl_elbc_init: mtd->writesize = %d\n",
mtd->writesize);
- dev_dbg(ctrl->dev, "fsl_elbc_init: mtd->oobsize = %d\n",
+ dev_dbg(priv->dev, "fsl_elbc_init: mtd->oobsize = %d\n",
mtd->oobsize);
/* adjust Option Register and ECC to match Flash page size */
@@ -719,7 +720,7 @@ static int fsl_elbc_chip_init_tail(struct mtd_info *mtd)
chip->badblock_pattern = &largepage_memorybased;
}
} else {
- dev_err(ctrl->dev,
+ dev_err(priv->dev,
"fsl_elbc_init: page size %d is not supported\n",
mtd->writesize);
return -1;
@@ -750,18 +751,19 @@ static void fsl_elbc_write_page(struct mtd_info *mtd,
const uint8_t *buf)
{
struct fsl_elbc_mtd *priv = chip->priv;
- struct fsl_elbc_ctrl *ctrl = priv->ctrl;
+ struct fsl_elbc_fcm_ctrl *elbc_fcm_ctrl = priv->ctrl->nand;
fsl_elbc_write_buf(mtd, buf, mtd->writesize);
fsl_elbc_write_buf(mtd, chip->oob_poi, mtd->oobsize);
- ctrl->oob_poi = chip->oob_poi;
+ elbc_fcm_ctrl->oob_poi = chip->oob_poi;
}
static int fsl_elbc_chip_init(struct fsl_elbc_mtd *priv)
{
- struct fsl_elbc_ctrl *ctrl = priv->ctrl;
+ struct fsl_lbc_ctrl *ctrl = priv->ctrl;
struct fsl_lbc_regs __iomem *lbc = ctrl->regs;
+ struct fsl_elbc_fcm_ctrl *elbc_fcm_ctrl = ctrl->nand;
struct nand_chip *chip = &priv->chip;
dev_dbg(priv->dev, "eLBC Set Information for bank %d\n", priv->bank);
@@ -790,7 +792,7 @@ static int fsl_elbc_chip_init(struct fsl_elbc_mtd *priv)
chip->options = NAND_NO_READRDY | NAND_NO_AUTOINCR |
NAND_USE_FLASH_BBT;
- chip->controller = &ctrl->controller;
+ chip->controller = &elbc_fcm_ctrl->controller;
chip->priv = priv;
chip->ecc.read_page = fsl_elbc_read_page;
@@ -815,8 +817,7 @@ static int fsl_elbc_chip_init(struct fsl_elbc_mtd *priv)
static int fsl_elbc_chip_remove(struct fsl_elbc_mtd *priv)
{
- struct fsl_elbc_ctrl *ctrl = priv->ctrl;
-
+ struct fsl_elbc_fcm_ctrl *elbc_fcm_ctrl = priv->ctrl->nand;
nand_release(&priv->mtd);
kfree(priv->mtd.name);
@@ -824,18 +825,21 @@ static int fsl_elbc_chip_remove(struct fsl_elbc_mtd *priv)
if (priv->vbase)
iounmap(priv->vbase);
- ctrl->chips[priv->bank] = NULL;
+ elbc_fcm_ctrl->chips[priv->bank] = NULL;
kfree(priv);
-
+ kfree(elbc_fcm_ctrl);
return 0;
}
-static int __devinit fsl_elbc_chip_probe(struct fsl_elbc_ctrl *ctrl,
- struct device_node *node)
+static DEFINE_MUTEX(fsl_elbc_nand_mutex);
+
+static int __devinit fsl_elbc_nand_probe(struct platform_device *pdev)
{
- struct fsl_lbc_regs __iomem *lbc = ctrl->regs;
+ struct fsl_lbc_regs __iomem *lbc;
struct fsl_elbc_mtd *priv;
struct resource res;
+ struct fsl_elbc_fcm_ctrl *elbc_fcm_ctrl;
+
#ifdef CONFIG_MTD_PARTITIONS
static const char *part_probe_types[]
= { "cmdlinepart", "RedBoot", NULL };
@@ -843,11 +847,18 @@ static int __devinit fsl_elbc_chip_probe(struct fsl_elbc_ctrl *ctrl,
#endif
int ret;
int bank;
+ struct device *dev;
+ struct device_node *node = pdev->dev.of_node;
+
+ if (!fsl_lbc_ctrl_dev || !fsl_lbc_ctrl_dev->regs)
+ return -ENODEV;
+ lbc = fsl_lbc_ctrl_dev->regs;
+ dev = fsl_lbc_ctrl_dev->dev;
/* get, allocate and map the memory resource */
ret = of_address_to_resource(node, 0, &res);
if (ret) {
- dev_err(ctrl->dev, "failed to get resource\n");
+ dev_err(dev, "failed to get resource\n");
return ret;
}
@@ -857,11 +868,11 @@ static int __devinit fsl_elbc_chip_probe(struct fsl_elbc_ctrl *ctrl,
(in_be32(&lbc->bank[bank].br) & BR_MSEL) == BR_MS_FCM &&
(in_be32(&lbc->bank[bank].br) &
in_be32(&lbc->bank[bank].or) & BR_BA)
- == res.start)
+ == fsl_lbc_addr(res.start))
break;
if (bank >= MAX_BANKS) {
- dev_err(ctrl->dev, "address did not match any chip selects\n");
+ dev_err(dev, "address did not match any chip selects\n");
return -ENODEV;
}
@@ -869,14 +880,33 @@ static int __devinit fsl_elbc_chip_probe(struct fsl_elbc_ctrl *ctrl,
if (!priv)
return -ENOMEM;
- ctrl->chips[bank] = priv;
+ mutex_lock(&fsl_elbc_nand_mutex);
+ if (!fsl_lbc_ctrl_dev->nand) {
+ elbc_fcm_ctrl = kzalloc(sizeof(*elbc_fcm_ctrl), GFP_KERNEL);
+ if (!elbc_fcm_ctrl) {
+ dev_err(dev, "failed to allocate memory\n");
+ mutex_unlock(&fsl_elbc_nand_mutex);
+ ret = -ENOMEM;
+ goto err;
+ }
+ elbc_fcm_ctrl->counter++;
+
+ spin_lock_init(&elbc_fcm_ctrl->controller.lock);
+ init_waitqueue_head(&elbc_fcm_ctrl->controller.wq);
+ fsl_lbc_ctrl_dev->nand = elbc_fcm_ctrl;
+ } else {
+ elbc_fcm_ctrl = fsl_lbc_ctrl_dev->nand;
+ }
+ mutex_unlock(&fsl_elbc_nand_mutex);
+
+ elbc_fcm_ctrl->chips[bank] = priv;
priv->bank = bank;
- priv->ctrl = ctrl;
- priv->dev = ctrl->dev;
+ priv->ctrl = fsl_lbc_ctrl_dev;
+ priv->dev = dev;
priv->vbase = ioremap(res.start, resource_size(&res));
if (!priv->vbase) {
- dev_err(ctrl->dev, "failed to map chip region\n");
+ dev_err(dev, "failed to map chip region\n");
ret = -ENOMEM;
goto err;
}
@@ -933,171 +963,53 @@ err:
return ret;
}
-static int __devinit fsl_elbc_ctrl_init(struct fsl_elbc_ctrl *ctrl)
+static int fsl_elbc_nand_remove(struct platform_device *pdev)
{
- struct fsl_lbc_regs __iomem *lbc = ctrl->regs;
-
- /*
- * NAND transactions can tie up the bus for a long time, so set the
- * bus timeout to max by clearing LBCR[BMT] (highest base counter
- * value) and setting LBCR[BMTPS] to the highest prescaler value.
- */
- clrsetbits_be32(&lbc->lbcr, LBCR_BMT, 15);
-
- /* clear event registers */
- setbits32(&lbc->ltesr, LTESR_NAND_MASK);
- out_be32(&lbc->lteatr, 0);
-
- /* Enable interrupts for any detected events */
- out_be32(&lbc->lteir, LTESR_NAND_MASK);
-
- ctrl->read_bytes = 0;
- ctrl->index = 0;
- ctrl->addr = NULL;
-
- return 0;
-}
-
-static int fsl_elbc_ctrl_remove(struct platform_device *ofdev)
-{
- struct fsl_elbc_ctrl *ctrl = dev_get_drvdata(&ofdev->dev);
int i;
-
+ struct fsl_elbc_fcm_ctrl *elbc_fcm_ctrl = fsl_lbc_ctrl_dev->nand;
for (i = 0; i < MAX_BANKS; i++)
- if (ctrl->chips[i])
- fsl_elbc_chip_remove(ctrl->chips[i]);
-
- if (ctrl->irq)
- free_irq(ctrl->irq, ctrl);
-
- if (ctrl->regs)
- iounmap(ctrl->regs);
-
- dev_set_drvdata(&ofdev->dev, NULL);
- kfree(ctrl);
- return 0;
-}
-
-/* NOTE: This interrupt is also used to report other localbus events,
- * such as transaction errors on other chipselects. If we want to
- * capture those, we'll need to move the IRQ code into a shared
- * LBC driver.
- */
-
-static irqreturn_t fsl_elbc_ctrl_irq(int irqno, void *data)
-{
- struct fsl_elbc_ctrl *ctrl = data;
- struct fsl_lbc_regs __iomem *lbc = ctrl->regs;
- __be32 status = in_be32(&lbc->ltesr) & LTESR_NAND_MASK;
-
- if (status) {
- out_be32(&lbc->ltesr, status);
- out_be32(&lbc->lteatr, 0);
-
- ctrl->irq_status = status;
- smp_wmb();
- wake_up(&ctrl->irq_wait);
-
- return IRQ_HANDLED;
+ if (elbc_fcm_ctrl->chips[i])
+ fsl_elbc_chip_remove(elbc_fcm_ctrl->chips[i]);
+
+ mutex_lock(&fsl_elbc_nand_mutex);
+ elbc_fcm_ctrl->counter--;
+ if (!elbc_fcm_ctrl->counter) {
+ fsl_lbc_ctrl_dev->nand = NULL;
+ kfree(elbc_fcm_ctrl);
}
-
- return IRQ_NONE;
-}
-
-/* fsl_elbc_ctrl_probe
- *
- * called by device layer when it finds a device matching
- * one our driver can handled. This code allocates all of
- * the resources needed for the controller only. The
- * resources for the NAND banks themselves are allocated
- * in the chip probe function.
-*/
-
-static int __devinit fsl_elbc_ctrl_probe(struct platform_device *ofdev,
- const struct of_device_id *match)
-{
- struct device_node *child;
- struct fsl_elbc_ctrl *ctrl;
- int ret;
-
- ctrl = kzalloc(sizeof(*ctrl), GFP_KERNEL);
- if (!ctrl)
- return -ENOMEM;
-
- dev_set_drvdata(&ofdev->dev, ctrl);
-
- spin_lock_init(&ctrl->controller.lock);
- init_waitqueue_head(&ctrl->controller.wq);
- init_waitqueue_head(&ctrl->irq_wait);
-
- ctrl->regs = of_iomap(ofdev->dev.of_node, 0);
- if (!ctrl->regs) {
- dev_err(&ofdev->dev, "failed to get memory region\n");
- ret = -ENODEV;
- goto err;
- }
-
- ctrl->irq = of_irq_to_resource(ofdev->dev.of_node, 0, NULL);
- if (ctrl->irq == NO_IRQ) {
- dev_err(&ofdev->dev, "failed to get irq resource\n");
- ret = -ENODEV;
- goto err;
- }
-
- ctrl->dev = &ofdev->dev;
-
- ret = fsl_elbc_ctrl_init(ctrl);
- if (ret < 0)
- goto err;
-
- ret = request_irq(ctrl->irq, fsl_elbc_ctrl_irq, 0, "fsl-elbc", ctrl);
- if (ret != 0) {
- dev_err(&ofdev->dev, "failed to install irq (%d)\n",
- ctrl->irq);
- ret = ctrl->irq;
- goto err;
- }
-
- for_each_child_of_node(ofdev->dev.of_node, child)
- if (of_device_is_compatible(child, "fsl,elbc-fcm-nand"))
- fsl_elbc_chip_probe(ctrl, child);
+ mutex_unlock(&fsl_elbc_nand_mutex);
return 0;
-err:
- fsl_elbc_ctrl_remove(ofdev);
- return ret;
}
-static const struct of_device_id fsl_elbc_match[] = {
- {
- .compatible = "fsl,elbc",
- },
+static const struct of_device_id fsl_elbc_nand_match[] = {
+ { .compatible = "fsl,elbc-fcm-nand", },
{}
};
-static struct of_platform_driver fsl_elbc_ctrl_driver = {
+static struct platform_driver fsl_elbc_nand_driver = {
.driver = {
- .name = "fsl-elbc",
+ .name = "fsl,elbc-fcm-nand",
.owner = THIS_MODULE,
- .of_match_table = fsl_elbc_match,
+ .of_match_table = fsl_elbc_nand_match,
},
- .probe = fsl_elbc_ctrl_probe,
- .remove = fsl_elbc_ctrl_remove,
+ .probe = fsl_elbc_nand_probe,
+ .remove = fsl_elbc_nand_remove,
};
-static int __init fsl_elbc_init(void)
+static int __init fsl_elbc_nand_init(void)
{
- return of_register_platform_driver(&fsl_elbc_ctrl_driver);
+ return platform_driver_register(&fsl_elbc_nand_driver);
}
-static void __exit fsl_elbc_exit(void)
+static void __exit fsl_elbc_nand_exit(void)
{
- of_unregister_platform_driver(&fsl_elbc_ctrl_driver);
+ platform_driver_unregister(&fsl_elbc_nand_driver);
}
-module_init(fsl_elbc_init);
-module_exit(fsl_elbc_exit);
+module_init(fsl_elbc_nand_init);
+module_exit(fsl_elbc_nand_exit);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Freescale");
diff --git a/drivers/mtd/nand/fsl_upm.c b/drivers/mtd/nand/fsl_upm.c
index 4eff8b25e5a..efdcca94ce5 100644
--- a/drivers/mtd/nand/fsl_upm.c
+++ b/drivers/mtd/nand/fsl_upm.c
@@ -186,7 +186,7 @@ static int __devinit fun_chip_init(struct fsl_upm_nand *fun,
if (!flash_np)
return -ENODEV;
- fun->mtd.name = kasprintf(GFP_KERNEL, "%x.%s", io_res->start,
+ fun->mtd.name = kasprintf(GFP_KERNEL, "0x%llx.%s", (u64)io_res->start,
flash_np->name);
if (!fun->mtd.name) {
ret = -ENOMEM;
@@ -222,7 +222,7 @@ static int __devinit fun_probe(struct platform_device *ofdev,
{
struct fsl_upm_nand *fun;
struct resource io_res;
- const uint32_t *prop;
+ const __be32 *prop;
int rnb_gpio;
int ret;
int size;
@@ -270,7 +270,7 @@ static int __devinit fun_probe(struct platform_device *ofdev,
goto err1;
}
for (i = 0; i < fun->mchip_count; i++)
- fun->mchip_offsets[i] = prop[i];
+ fun->mchip_offsets[i] = be32_to_cpu(prop[i]);
} else {
fun->mchip_count = 1;
}
@@ -295,13 +295,13 @@ static int __devinit fun_probe(struct platform_device *ofdev,
prop = of_get_property(ofdev->dev.of_node, "chip-delay", NULL);
if (prop)
- fun->chip_delay = *prop;
+ fun->chip_delay = be32_to_cpup(prop);
else
fun->chip_delay = 50;
prop = of_get_property(ofdev->dev.of_node, "fsl,upm-wait-flags", &size);
if (prop && size == sizeof(uint32_t))
- fun->wait_flags = *prop;
+ fun->wait_flags = be32_to_cpup(prop);
else
fun->wait_flags = FSL_UPM_WAIT_RUN_PATTERN |
FSL_UPM_WAIT_WRITE_BYTE;
diff --git a/drivers/mtd/nand/fsmc_nand.c b/drivers/mtd/nand/fsmc_nand.c
new file mode 100644
index 00000000000..02edfba25b0
--- /dev/null
+++ b/drivers/mtd/nand/fsmc_nand.c
@@ -0,0 +1,866 @@
+/*
+ * drivers/mtd/nand/fsmc_nand.c
+ *
+ * ST Microelectronics
+ * Flexible Static Memory Controller (FSMC)
+ * Driver for NAND portions
+ *
+ * Copyright © 2010 ST Microelectronics
+ * Vipin Kumar <vipin.kumar@st.com>
+ * Ashish Priyadarshi
+ *
+ * Based on drivers/mtd/nand/nomadik_nand.c
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/resource.h>
+#include <linux/sched.h>
+#include <linux/types.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/nand_ecc.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/partitions.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/mtd/fsmc.h>
+#include <mtd/mtd-abi.h>
+
+static struct nand_ecclayout fsmc_ecc1_layout = {
+ .eccbytes = 24,
+ .eccpos = {2, 3, 4, 18, 19, 20, 34, 35, 36, 50, 51, 52,
+ 66, 67, 68, 82, 83, 84, 98, 99, 100, 114, 115, 116},
+ .oobfree = {
+ {.offset = 8, .length = 8},
+ {.offset = 24, .length = 8},
+ {.offset = 40, .length = 8},
+ {.offset = 56, .length = 8},
+ {.offset = 72, .length = 8},
+ {.offset = 88, .length = 8},
+ {.offset = 104, .length = 8},
+ {.offset = 120, .length = 8}
+ }
+};
+
+static struct nand_ecclayout fsmc_ecc4_lp_layout = {
+ .eccbytes = 104,
+ .eccpos = { 2, 3, 4, 5, 6, 7, 8,
+ 9, 10, 11, 12, 13, 14,
+ 18, 19, 20, 21, 22, 23, 24,
+ 25, 26, 27, 28, 29, 30,
+ 34, 35, 36, 37, 38, 39, 40,
+ 41, 42, 43, 44, 45, 46,
+ 50, 51, 52, 53, 54, 55, 56,
+ 57, 58, 59, 60, 61, 62,
+ 66, 67, 68, 69, 70, 71, 72,
+ 73, 74, 75, 76, 77, 78,
+ 82, 83, 84, 85, 86, 87, 88,
+ 89, 90, 91, 92, 93, 94,
+ 98, 99, 100, 101, 102, 103, 104,
+ 105, 106, 107, 108, 109, 110,
+ 114, 115, 116, 117, 118, 119, 120,
+ 121, 122, 123, 124, 125, 126
+ },
+ .oobfree = {
+ {.offset = 15, .length = 3},
+ {.offset = 31, .length = 3},
+ {.offset = 47, .length = 3},
+ {.offset = 63, .length = 3},
+ {.offset = 79, .length = 3},
+ {.offset = 95, .length = 3},
+ {.offset = 111, .length = 3},
+ {.offset = 127, .length = 1}
+ }
+};
+
+/*
+ * ECC placement definitions in oobfree type format.
+ * There are 13 bytes of ecc for every 512 byte block and it has to be read
+ * consecutively and immediately after the 512 byte data block for hardware to
+ * generate the error bit offsets in 512 byte data.
+ * Managing the ecc bytes in the following way makes it easier for software to
+ * read ecc bytes consecutive to data bytes. This way is similar to
+ * oobfree structure maintained already in generic nand driver
+ */
+static struct fsmc_eccplace fsmc_ecc4_lp_place = {
+ .eccplace = {
+ {.offset = 2, .length = 13},
+ {.offset = 18, .length = 13},
+ {.offset = 34, .length = 13},
+ {.offset = 50, .length = 13},
+ {.offset = 66, .length = 13},
+ {.offset = 82, .length = 13},
+ {.offset = 98, .length = 13},
+ {.offset = 114, .length = 13}
+ }
+};
+
+static struct nand_ecclayout fsmc_ecc4_sp_layout = {
+ .eccbytes = 13,
+ .eccpos = { 0, 1, 2, 3, 6, 7, 8,
+ 9, 10, 11, 12, 13, 14
+ },
+ .oobfree = {
+ {.offset = 15, .length = 1},
+ }
+};
+
+static struct fsmc_eccplace fsmc_ecc4_sp_place = {
+ .eccplace = {
+ {.offset = 0, .length = 4},
+ {.offset = 6, .length = 9}
+ }
+};
+
+/*
+ * Default partition tables to be used if the partition information not
+ * provided through platform data
+ */
+#define PARTITION(n, off, sz) {.name = n, .offset = off, .size = sz}
+
+/*
+ * Default partition layout for small page(= 512 bytes) devices
+ * Size for "Root file system" is updated in driver based on actual device size
+ */
+static struct mtd_partition partition_info_16KB_blk[] = {
+ PARTITION("X-loader", 0, 4 * 0x4000),
+ PARTITION("U-Boot", 0x10000, 20 * 0x4000),
+ PARTITION("Kernel", 0x60000, 256 * 0x4000),
+ PARTITION("Root File System", 0x460000, 0),
+};
+
+/*
+ * Default partition layout for large page(> 512 bytes) devices
+ * Size for "Root file system" is updated in driver based on actual device size
+ */
+static struct mtd_partition partition_info_128KB_blk[] = {
+ PARTITION("X-loader", 0, 4 * 0x20000),
+ PARTITION("U-Boot", 0x80000, 12 * 0x20000),
+ PARTITION("Kernel", 0x200000, 48 * 0x20000),
+ PARTITION("Root File System", 0x800000, 0),
+};
+
+#ifdef CONFIG_MTD_CMDLINE_PARTS
+const char *part_probes[] = { "cmdlinepart", NULL };
+#endif
+
+/**
+ * struct fsmc_nand_data - atructure for FSMC NAND device state
+ *
+ * @mtd: MTD info for a NAND flash.
+ * @nand: Chip related info for a NAND flash.
+ * @partitions: Partition info for a NAND Flash.
+ * @nr_partitions: Total number of partition of a NAND flash.
+ *
+ * @ecc_place: ECC placing locations in oobfree type format.
+ * @bank: Bank number for probed device.
+ * @clk: Clock structure for FSMC.
+ *
+ * @data_va: NAND port for Data.
+ * @cmd_va: NAND port for Command.
+ * @addr_va: NAND port for Address.
+ * @regs_va: FSMC regs base address.
+ */
+struct fsmc_nand_data {
+ struct mtd_info mtd;
+ struct nand_chip nand;
+ struct mtd_partition *partitions;
+ unsigned int nr_partitions;
+
+ struct fsmc_eccplace *ecc_place;
+ unsigned int bank;
+ struct clk *clk;
+
+ struct resource *resregs;
+ struct resource *rescmd;
+ struct resource *resaddr;
+ struct resource *resdata;
+
+ void __iomem *data_va;
+ void __iomem *cmd_va;
+ void __iomem *addr_va;
+ void __iomem *regs_va;
+
+ void (*select_chip)(uint32_t bank, uint32_t busw);
+};
+
+/* Assert CS signal based on chipnr */
+static void fsmc_select_chip(struct mtd_info *mtd, int chipnr)
+{
+ struct nand_chip *chip = mtd->priv;
+ struct fsmc_nand_data *host;
+
+ host = container_of(mtd, struct fsmc_nand_data, mtd);
+
+ switch (chipnr) {
+ case -1:
+ chip->cmd_ctrl(mtd, NAND_CMD_NONE, 0 | NAND_CTRL_CHANGE);
+ break;
+ case 0:
+ case 1:
+ case 2:
+ case 3:
+ if (host->select_chip)
+ host->select_chip(chipnr,
+ chip->options & NAND_BUSWIDTH_16);
+ break;
+
+ default:
+ BUG();
+ }
+}
+
+/*
+ * fsmc_cmd_ctrl - For facilitaing Hardware access
+ * This routine allows hardware specific access to control-lines(ALE,CLE)
+ */
+static void fsmc_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
+{
+ struct nand_chip *this = mtd->priv;
+ struct fsmc_nand_data *host = container_of(mtd,
+ struct fsmc_nand_data, mtd);
+ struct fsmc_regs *regs = host->regs_va;
+ unsigned int bank = host->bank;
+
+ if (ctrl & NAND_CTRL_CHANGE) {
+ if (ctrl & NAND_CLE) {
+ this->IO_ADDR_R = (void __iomem *)host->cmd_va;
+ this->IO_ADDR_W = (void __iomem *)host->cmd_va;
+ } else if (ctrl & NAND_ALE) {
+ this->IO_ADDR_R = (void __iomem *)host->addr_va;
+ this->IO_ADDR_W = (void __iomem *)host->addr_va;
+ } else {
+ this->IO_ADDR_R = (void __iomem *)host->data_va;
+ this->IO_ADDR_W = (void __iomem *)host->data_va;
+ }
+
+ if (ctrl & NAND_NCE) {
+ writel(readl(&regs->bank_regs[bank].pc) | FSMC_ENABLE,
+ &regs->bank_regs[bank].pc);
+ } else {
+ writel(readl(&regs->bank_regs[bank].pc) & ~FSMC_ENABLE,
+ &regs->bank_regs[bank].pc);
+ }
+ }
+
+ mb();
+
+ if (cmd != NAND_CMD_NONE)
+ writeb(cmd, this->IO_ADDR_W);
+}
+
+/*
+ * fsmc_nand_setup - FSMC (Flexible Static Memory Controller) init routine
+ *
+ * This routine initializes timing parameters related to NAND memory access in
+ * FSMC registers
+ */
+static void __init fsmc_nand_setup(struct fsmc_regs *regs, uint32_t bank,
+ uint32_t busw)
+{
+ uint32_t value = FSMC_DEVTYPE_NAND | FSMC_ENABLE | FSMC_WAITON;
+
+ if (busw)
+ writel(value | FSMC_DEVWID_16, &regs->bank_regs[bank].pc);
+ else
+ writel(value | FSMC_DEVWID_8, &regs->bank_regs[bank].pc);
+
+ writel(readl(&regs->bank_regs[bank].pc) | FSMC_TCLR_1 | FSMC_TAR_1,
+ &regs->bank_regs[bank].pc);
+ writel(FSMC_THIZ_1 | FSMC_THOLD_4 | FSMC_TWAIT_6 | FSMC_TSET_0,
+ &regs->bank_regs[bank].comm);
+ writel(FSMC_THIZ_1 | FSMC_THOLD_4 | FSMC_TWAIT_6 | FSMC_TSET_0,
+ &regs->bank_regs[bank].attrib);
+}
+
+/*
+ * fsmc_enable_hwecc - Enables Hardware ECC through FSMC registers
+ */
+static void fsmc_enable_hwecc(struct mtd_info *mtd, int mode)
+{
+ struct fsmc_nand_data *host = container_of(mtd,
+ struct fsmc_nand_data, mtd);
+ struct fsmc_regs *regs = host->regs_va;
+ uint32_t bank = host->bank;
+
+ writel(readl(&regs->bank_regs[bank].pc) & ~FSMC_ECCPLEN_256,
+ &regs->bank_regs[bank].pc);
+ writel(readl(&regs->bank_regs[bank].pc) & ~FSMC_ECCEN,
+ &regs->bank_regs[bank].pc);
+ writel(readl(&regs->bank_regs[bank].pc) | FSMC_ECCEN,
+ &regs->bank_regs[bank].pc);
+}
+
+/*
+ * fsmc_read_hwecc_ecc4 - Hardware ECC calculator for ecc4 option supported by
+ * FSMC. ECC is 13 bytes for 512 bytes of data (supports error correction upto
+ * max of 8-bits)
+ */
+static int fsmc_read_hwecc_ecc4(struct mtd_info *mtd, const uint8_t *data,
+ uint8_t *ecc)
+{
+ struct fsmc_nand_data *host = container_of(mtd,
+ struct fsmc_nand_data, mtd);
+ struct fsmc_regs *regs = host->regs_va;
+ uint32_t bank = host->bank;
+ uint32_t ecc_tmp;
+ unsigned long deadline = jiffies + FSMC_BUSY_WAIT_TIMEOUT;
+
+ do {
+ if (readl(&regs->bank_regs[bank].sts) & FSMC_CODE_RDY)
+ break;
+ else
+ cond_resched();
+ } while (!time_after_eq(jiffies, deadline));
+
+ ecc_tmp = readl(&regs->bank_regs[bank].ecc1);
+ ecc[0] = (uint8_t) (ecc_tmp >> 0);
+ ecc[1] = (uint8_t) (ecc_tmp >> 8);
+ ecc[2] = (uint8_t) (ecc_tmp >> 16);
+ ecc[3] = (uint8_t) (ecc_tmp >> 24);
+
+ ecc_tmp = readl(&regs->bank_regs[bank].ecc2);
+ ecc[4] = (uint8_t) (ecc_tmp >> 0);
+ ecc[5] = (uint8_t) (ecc_tmp >> 8);
+ ecc[6] = (uint8_t) (ecc_tmp >> 16);
+ ecc[7] = (uint8_t) (ecc_tmp >> 24);
+
+ ecc_tmp = readl(&regs->bank_regs[bank].ecc3);
+ ecc[8] = (uint8_t) (ecc_tmp >> 0);
+ ecc[9] = (uint8_t) (ecc_tmp >> 8);
+ ecc[10] = (uint8_t) (ecc_tmp >> 16);
+ ecc[11] = (uint8_t) (ecc_tmp >> 24);
+
+ ecc_tmp = readl(&regs->bank_regs[bank].sts);
+ ecc[12] = (uint8_t) (ecc_tmp >> 16);
+
+ return 0;
+}
+
+/*
+ * fsmc_read_hwecc_ecc1 - Hardware ECC calculator for ecc1 option supported by
+ * FSMC. ECC is 3 bytes for 512 bytes of data (supports error correction upto
+ * max of 1-bit)
+ */
+static int fsmc_read_hwecc_ecc1(struct mtd_info *mtd, const uint8_t *data,
+ uint8_t *ecc)
+{
+ struct fsmc_nand_data *host = container_of(mtd,
+ struct fsmc_nand_data, mtd);
+ struct fsmc_regs *regs = host->regs_va;
+ uint32_t bank = host->bank;
+ uint32_t ecc_tmp;
+
+ ecc_tmp = readl(&regs->bank_regs[bank].ecc1);
+ ecc[0] = (uint8_t) (ecc_tmp >> 0);
+ ecc[1] = (uint8_t) (ecc_tmp >> 8);
+ ecc[2] = (uint8_t) (ecc_tmp >> 16);
+
+ return 0;
+}
+
+/*
+ * fsmc_read_page_hwecc
+ * @mtd: mtd info structure
+ * @chip: nand chip info structure
+ * @buf: buffer to store read data
+ * @page: page number to read
+ *
+ * This routine is needed for fsmc verison 8 as reading from NAND chip has to be
+ * performed in a strict sequence as follows:
+ * data(512 byte) -> ecc(13 byte)
+ * After this read, fsmc hardware generates and reports error data bits(upto a
+ * max of 8 bits)
+ */
+static int fsmc_read_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip,
+ uint8_t *buf, int page)
+{
+ struct fsmc_nand_data *host = container_of(mtd,
+ struct fsmc_nand_data, mtd);
+ struct fsmc_eccplace *ecc_place = host->ecc_place;
+ int i, j, s, stat, eccsize = chip->ecc.size;
+ int eccbytes = chip->ecc.bytes;
+ int eccsteps = chip->ecc.steps;
+ uint8_t *p = buf;
+ uint8_t *ecc_calc = chip->buffers->ecccalc;
+ uint8_t *ecc_code = chip->buffers->ecccode;
+ int off, len, group = 0;
+ /*
+ * ecc_oob is intentionally taken as uint16_t. In 16bit devices, we
+ * end up reading 14 bytes (7 words) from oob. The local array is
+ * to maintain word alignment
+ */
+ uint16_t ecc_oob[7];
+ uint8_t *oob = (uint8_t *)&ecc_oob[0];
+
+ for (i = 0, s = 0; s < eccsteps; s++, i += eccbytes, p += eccsize) {
+
+ chip->cmdfunc(mtd, NAND_CMD_READ0, s * eccsize, page);
+ chip->ecc.hwctl(mtd, NAND_ECC_READ);
+ chip->read_buf(mtd, p, eccsize);
+
+ for (j = 0; j < eccbytes;) {
+ off = ecc_place->eccplace[group].offset;
+ len = ecc_place->eccplace[group].length;
+ group++;
+
+ /*
+ * length is intentionally kept a higher multiple of 2
+ * to read at least 13 bytes even in case of 16 bit NAND
+ * devices
+ */
+ len = roundup(len, 2);
+ chip->cmdfunc(mtd, NAND_CMD_READOOB, off, page);
+ chip->read_buf(mtd, oob + j, len);
+ j += len;
+ }
+
+ memcpy(&ecc_code[i], oob, 13);
+ chip->ecc.calculate(mtd, p, &ecc_calc[i]);
+
+ stat = chip->ecc.correct(mtd, p, &ecc_code[i], &ecc_calc[i]);
+ if (stat < 0)
+ mtd->ecc_stats.failed++;
+ else
+ mtd->ecc_stats.corrected += stat;
+ }
+
+ return 0;
+}
+
+/*
+ * fsmc_correct_data
+ * @mtd: mtd info structure
+ * @dat: buffer of read data
+ * @read_ecc: ecc read from device spare area
+ * @calc_ecc: ecc calculated from read data
+ *
+ * calc_ecc is a 104 bit information containing maximum of 8 error
+ * offset informations of 13 bits each in 512 bytes of read data.
+ */
+static int fsmc_correct_data(struct mtd_info *mtd, uint8_t *dat,
+ uint8_t *read_ecc, uint8_t *calc_ecc)
+{
+ struct fsmc_nand_data *host = container_of(mtd,
+ struct fsmc_nand_data, mtd);
+ struct fsmc_regs *regs = host->regs_va;
+ unsigned int bank = host->bank;
+ uint16_t err_idx[8];
+ uint64_t ecc_data[2];
+ uint32_t num_err, i;
+
+ /* The calculated ecc is actually the correction index in data */
+ memcpy(ecc_data, calc_ecc, 13);
+
+ /*
+ * ------------------- calc_ecc[] bit wise -----------|--13 bits--|
+ * |---idx[7]--|--.....-----|---idx[2]--||---idx[1]--||---idx[0]--|
+ *
+ * calc_ecc is a 104 bit information containing maximum of 8 error
+ * offset informations of 13 bits each. calc_ecc is copied into a
+ * uint64_t array and error offset indexes are populated in err_idx
+ * array
+ */
+ for (i = 0; i < 8; i++) {
+ if (i == 4) {
+ err_idx[4] = ((ecc_data[1] & 0x1) << 12) | ecc_data[0];
+ ecc_data[1] >>= 1;
+ continue;
+ }
+ err_idx[i] = (ecc_data[i/4] & 0x1FFF);
+ ecc_data[i/4] >>= 13;
+ }
+
+ num_err = (readl(&regs->bank_regs[bank].sts) >> 10) & 0xF;
+
+ if (num_err == 0xF)
+ return -EBADMSG;
+
+ i = 0;
+ while (num_err--) {
+ change_bit(0, (unsigned long *)&err_idx[i]);
+ change_bit(1, (unsigned long *)&err_idx[i]);
+
+ if (err_idx[i] <= 512 * 8) {
+ change_bit(err_idx[i], (unsigned long *)dat);
+ i++;
+ }
+ }
+ return i;
+}
+
+/*
+ * fsmc_nand_probe - Probe function
+ * @pdev: platform device structure
+ */
+static int __init fsmc_nand_probe(struct platform_device *pdev)
+{
+ struct fsmc_nand_platform_data *pdata = dev_get_platdata(&pdev->dev);
+ struct fsmc_nand_data *host;
+ struct mtd_info *mtd;
+ struct nand_chip *nand;
+ struct fsmc_regs *regs;
+ struct resource *res;
+ int nr_parts, ret = 0;
+
+ if (!pdata) {
+ dev_err(&pdev->dev, "platform data is NULL\n");
+ return -EINVAL;
+ }
+
+ /* Allocate memory for the device structure (and zero it) */
+ host = kzalloc(sizeof(*host), GFP_KERNEL);
+ if (!host) {
+ dev_err(&pdev->dev, "failed to allocate device structure\n");
+ return -ENOMEM;
+ }
+
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "nand_data");
+ if (!res) {
+ ret = -EIO;
+ goto err_probe1;
+ }
+
+ host->resdata = request_mem_region(res->start, resource_size(res),
+ pdev->name);
+ if (!host->resdata) {
+ ret = -EIO;
+ goto err_probe1;
+ }
+
+ host->data_va = ioremap(res->start, resource_size(res));
+ if (!host->data_va) {
+ ret = -EIO;
+ goto err_probe1;
+ }
+
+ host->resaddr = request_mem_region(res->start + PLAT_NAND_ALE,
+ resource_size(res), pdev->name);
+ if (!host->resaddr) {
+ ret = -EIO;
+ goto err_probe1;
+ }
+
+ host->addr_va = ioremap(res->start + PLAT_NAND_ALE, resource_size(res));
+ if (!host->addr_va) {
+ ret = -EIO;
+ goto err_probe1;
+ }
+
+ host->rescmd = request_mem_region(res->start + PLAT_NAND_CLE,
+ resource_size(res), pdev->name);
+ if (!host->rescmd) {
+ ret = -EIO;
+ goto err_probe1;
+ }
+
+ host->cmd_va = ioremap(res->start + PLAT_NAND_CLE, resource_size(res));
+ if (!host->cmd_va) {
+ ret = -EIO;
+ goto err_probe1;
+ }
+
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "fsmc_regs");
+ if (!res) {
+ ret = -EIO;
+ goto err_probe1;
+ }
+
+ host->resregs = request_mem_region(res->start, resource_size(res),
+ pdev->name);
+ if (!host->resregs) {
+ ret = -EIO;
+ goto err_probe1;
+ }
+
+ host->regs_va = ioremap(res->start, resource_size(res));
+ if (!host->regs_va) {
+ ret = -EIO;
+ goto err_probe1;
+ }
+
+ host->clk = clk_get(&pdev->dev, NULL);
+ if (IS_ERR(host->clk)) {
+ dev_err(&pdev->dev, "failed to fetch block clock\n");
+ ret = PTR_ERR(host->clk);
+ host->clk = NULL;
+ goto err_probe1;
+ }
+
+ ret = clk_enable(host->clk);
+ if (ret)
+ goto err_probe1;
+
+ host->bank = pdata->bank;
+ host->select_chip = pdata->select_bank;
+ regs = host->regs_va;
+
+ /* Link all private pointers */
+ mtd = &host->mtd;
+ nand = &host->nand;
+ mtd->priv = nand;
+ nand->priv = host;
+
+ host->mtd.owner = THIS_MODULE;
+ nand->IO_ADDR_R = host->data_va;
+ nand->IO_ADDR_W = host->data_va;
+ nand->cmd_ctrl = fsmc_cmd_ctrl;
+ nand->chip_delay = 30;
+
+ nand->ecc.mode = NAND_ECC_HW;
+ nand->ecc.hwctl = fsmc_enable_hwecc;
+ nand->ecc.size = 512;
+ nand->options = pdata->options;
+ nand->select_chip = fsmc_select_chip;
+
+ if (pdata->width == FSMC_NAND_BW16)
+ nand->options |= NAND_BUSWIDTH_16;
+
+ fsmc_nand_setup(regs, host->bank, nand->options & NAND_BUSWIDTH_16);
+
+ if (get_fsmc_version(host->regs_va) == FSMC_VER8) {
+ nand->ecc.read_page = fsmc_read_page_hwecc;
+ nand->ecc.calculate = fsmc_read_hwecc_ecc4;
+ nand->ecc.correct = fsmc_correct_data;
+ nand->ecc.bytes = 13;
+ } else {
+ nand->ecc.calculate = fsmc_read_hwecc_ecc1;
+ nand->ecc.correct = nand_correct_data;
+ nand->ecc.bytes = 3;
+ }
+
+ /*
+ * Scan to find existance of the device
+ */
+ if (nand_scan_ident(&host->mtd, 1, NULL)) {
+ ret = -ENXIO;
+ dev_err(&pdev->dev, "No NAND Device found!\n");
+ goto err_probe;
+ }
+
+ if (get_fsmc_version(host->regs_va) == FSMC_VER8) {
+ if (host->mtd.writesize == 512) {
+ nand->ecc.layout = &fsmc_ecc4_sp_layout;
+ host->ecc_place = &fsmc_ecc4_sp_place;
+ } else {
+ nand->ecc.layout = &fsmc_ecc4_lp_layout;
+ host->ecc_place = &fsmc_ecc4_lp_place;
+ }
+ } else {
+ nand->ecc.layout = &fsmc_ecc1_layout;
+ }
+
+ /* Second stage of scan to fill MTD data-structures */
+ if (nand_scan_tail(&host->mtd)) {
+ ret = -ENXIO;
+ goto err_probe;
+ }
+
+ /*
+ * The partition information can is accessed by (in the same precedence)
+ *
+ * command line through Bootloader,
+ * platform data,
+ * default partition information present in driver.
+ */
+#ifdef CONFIG_MTD_PARTITIONS
+#ifdef CONFIG_MTD_CMDLINE_PARTS
+ /*
+ * Check if partition info passed via command line
+ */
+ host->mtd.name = "nand";
+ nr_parts = parse_mtd_partitions(&host->mtd, part_probes,
+ &host->partitions, 0);
+ if (nr_parts > 0) {
+ host->nr_partitions = nr_parts;
+ } else {
+#endif
+ /*
+ * Check if partition info passed via command line
+ */
+ if (pdata->partitions) {
+ host->partitions = pdata->partitions;
+ host->nr_partitions = pdata->nr_partitions;
+ } else {
+ struct mtd_partition *partition;
+ int i;
+
+ /* Select the default partitions info */
+ switch (host->mtd.size) {
+ case 0x01000000:
+ case 0x02000000:
+ case 0x04000000:
+ host->partitions = partition_info_16KB_blk;
+ host->nr_partitions =
+ sizeof(partition_info_16KB_blk) /
+ sizeof(struct mtd_partition);
+ break;
+ case 0x08000000:
+ case 0x10000000:
+ case 0x20000000:
+ case 0x40000000:
+ host->partitions = partition_info_128KB_blk;
+ host->nr_partitions =
+ sizeof(partition_info_128KB_blk) /
+ sizeof(struct mtd_partition);
+ break;
+ default:
+ ret = -ENXIO;
+ pr_err("Unsupported NAND size\n");
+ goto err_probe;
+ }
+
+ partition = host->partitions;
+ for (i = 0; i < host->nr_partitions; i++, partition++) {
+ if (partition->size == 0) {
+ partition->size = host->mtd.size -
+ partition->offset;
+ break;
+ }
+ }
+ }
+#ifdef CONFIG_MTD_CMDLINE_PARTS
+ }
+#endif
+
+ if (host->partitions) {
+ ret = add_mtd_partitions(&host->mtd, host->partitions,
+ host->nr_partitions);
+ if (ret)
+ goto err_probe;
+ }
+#else
+ dev_info(&pdev->dev, "Registering %s as whole device\n", mtd->name);
+ if (!add_mtd_device(mtd)) {
+ ret = -ENXIO;
+ goto err_probe;
+ }
+#endif
+
+ platform_set_drvdata(pdev, host);
+ dev_info(&pdev->dev, "FSMC NAND driver registration successful\n");
+ return 0;
+
+err_probe:
+ clk_disable(host->clk);
+err_probe1:
+ if (host->clk)
+ clk_put(host->clk);
+ if (host->regs_va)
+ iounmap(host->regs_va);
+ if (host->resregs)
+ release_mem_region(host->resregs->start,
+ resource_size(host->resregs));
+ if (host->cmd_va)
+ iounmap(host->cmd_va);
+ if (host->rescmd)
+ release_mem_region(host->rescmd->start,
+ resource_size(host->rescmd));
+ if (host->addr_va)
+ iounmap(host->addr_va);
+ if (host->resaddr)
+ release_mem_region(host->resaddr->start,
+ resource_size(host->resaddr));
+ if (host->data_va)
+ iounmap(host->data_va);
+ if (host->resdata)
+ release_mem_region(host->resdata->start,
+ resource_size(host->resdata));
+
+ kfree(host);
+ return ret;
+}
+
+/*
+ * Clean up routine
+ */
+static int fsmc_nand_remove(struct platform_device *pdev)
+{
+ struct fsmc_nand_data *host = platform_get_drvdata(pdev);
+
+ platform_set_drvdata(pdev, NULL);
+
+ if (host) {
+#ifdef CONFIG_MTD_PARTITIONS
+ del_mtd_partitions(&host->mtd);
+#else
+ del_mtd_device(&host->mtd);
+#endif
+ clk_disable(host->clk);
+ clk_put(host->clk);
+
+ iounmap(host->regs_va);
+ release_mem_region(host->resregs->start,
+ resource_size(host->resregs));
+ iounmap(host->cmd_va);
+ release_mem_region(host->rescmd->start,
+ resource_size(host->rescmd));
+ iounmap(host->addr_va);
+ release_mem_region(host->resaddr->start,
+ resource_size(host->resaddr));
+ iounmap(host->data_va);
+ release_mem_region(host->resdata->start,
+ resource_size(host->resdata));
+
+ kfree(host);
+ }
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int fsmc_nand_suspend(struct device *dev)
+{
+ struct fsmc_nand_data *host = dev_get_drvdata(dev);
+ if (host)
+ clk_disable(host->clk);
+ return 0;
+}
+
+static int fsmc_nand_resume(struct device *dev)
+{
+ struct fsmc_nand_data *host = dev_get_drvdata(dev);
+ if (host)
+ clk_enable(host->clk);
+ return 0;
+}
+
+static const struct dev_pm_ops fsmc_nand_pm_ops = {
+ .suspend = fsmc_nand_suspend,
+ .resume = fsmc_nand_resume,
+};
+#endif
+
+static struct platform_driver fsmc_nand_driver = {
+ .remove = fsmc_nand_remove,
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "fsmc-nand",
+#ifdef CONFIG_PM
+ .pm = &fsmc_nand_pm_ops,
+#endif
+ },
+};
+
+static int __init fsmc_nand_init(void)
+{
+ return platform_driver_probe(&fsmc_nand_driver,
+ fsmc_nand_probe);
+}
+module_init(fsmc_nand_init);
+
+static void __exit fsmc_nand_exit(void)
+{
+ platform_driver_unregister(&fsmc_nand_driver);
+}
+module_exit(fsmc_nand_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Vipin Kumar <vipin.kumar@st.com>, Ashish Priyadarshi");
+MODULE_DESCRIPTION("NAND driver for SPEAr Platforms");
diff --git a/drivers/mtd/nand/mpc5121_nfc.c b/drivers/mtd/nand/mpc5121_nfc.c
index df0c1da4ff4..469e649c911 100644
--- a/drivers/mtd/nand/mpc5121_nfc.c
+++ b/drivers/mtd/nand/mpc5121_nfc.c
@@ -568,6 +568,7 @@ static int mpc5121_nfc_read_hw_config(struct mtd_info *mtd)
uint rcw_width;
uint rcwh;
uint romloc, ps;
+ int ret = 0;
rmnode = of_find_compatible_node(NULL, NULL, "fsl,mpc5121-reset");
if (!rmnode) {
@@ -579,7 +580,8 @@ static int mpc5121_nfc_read_hw_config(struct mtd_info *mtd)
rm = of_iomap(rmnode, 0);
if (!rm) {
dev_err(prv->dev, "Error mapping reset module node!\n");
- return -EBUSY;
+ ret = -EBUSY;
+ goto out;
}
rcwh = in_be32(&rm->rcwhr);
@@ -628,8 +630,9 @@ static int mpc5121_nfc_read_hw_config(struct mtd_info *mtd)
rcw_width * 8, rcw_pagesize,
rcw_sparesize);
iounmap(rm);
+out:
of_node_put(rmnode);
- return 0;
+ return ret;
}
/* Free driver resources */
@@ -660,7 +663,7 @@ static int __devinit mpc5121_nfc_probe(struct platform_device *op,
#endif
struct nand_chip *chip;
unsigned long regs_paddr, regs_size;
- const uint *chips_no;
+ const __be32 *chips_no;
int resettime = 0;
int retval = 0;
int rev, len;
@@ -803,7 +806,7 @@ static int __devinit mpc5121_nfc_probe(struct platform_device *op,
}
/* Detect NAND chips */
- if (nand_scan(mtd, *chips_no)) {
+ if (nand_scan(mtd, be32_to_cpup(chips_no))) {
dev_err(dev, "NAND Flash not found !\n");
devm_free_irq(dev, prv->irq, mtd);
retval = -ENXIO;
diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
index d551ddd9537..1f75a1b1f7c 100644
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
@@ -45,7 +45,7 @@
#include <linux/interrupt.h>
#include <linux/bitops.h>
#include <linux/leds.h>
-#include <asm/io.h>
+#include <linux/io.h>
#ifdef CONFIG_MTD_PARTITIONS
#include <linux/mtd/partitions.h>
@@ -59,7 +59,7 @@ static struct nand_ecclayout nand_oob_8 = {
{.offset = 3,
.length = 2},
{.offset = 6,
- .length = 2}}
+ .length = 2} }
};
static struct nand_ecclayout nand_oob_16 = {
@@ -67,7 +67,7 @@ static struct nand_ecclayout nand_oob_16 = {
.eccpos = {0, 1, 2, 3, 6, 7},
.oobfree = {
{.offset = 8,
- . length = 8}}
+ . length = 8} }
};
static struct nand_ecclayout nand_oob_64 = {
@@ -78,7 +78,7 @@ static struct nand_ecclayout nand_oob_64 = {
56, 57, 58, 59, 60, 61, 62, 63},
.oobfree = {
{.offset = 2,
- .length = 38}}
+ .length = 38} }
};
static struct nand_ecclayout nand_oob_128 = {
@@ -92,7 +92,7 @@ static struct nand_ecclayout nand_oob_128 = {
120, 121, 122, 123, 124, 125, 126, 127},
.oobfree = {
{.offset = 2,
- .length = 78}}
+ .length = 78} }
};
static int nand_get_device(struct nand_chip *chip, struct mtd_info *mtd,
@@ -612,7 +612,8 @@ static void nand_command(struct mtd_info *mtd, unsigned int command,
NAND_CTRL_CLE | NAND_CTRL_CHANGE);
chip->cmd_ctrl(mtd,
NAND_CMD_NONE, NAND_NCE | NAND_CTRL_CHANGE);
- while (!(chip->read_byte(mtd) & NAND_STATUS_READY)) ;
+ while (!(chip->read_byte(mtd) & NAND_STATUS_READY))
+ ;
return;
/* This applies to read commands */
@@ -718,7 +719,8 @@ static void nand_command_lp(struct mtd_info *mtd, unsigned int command,
NAND_NCE | NAND_CLE | NAND_CTRL_CHANGE);
chip->cmd_ctrl(mtd, NAND_CMD_NONE,
NAND_NCE | NAND_CTRL_CHANGE);
- while (!(chip->read_byte(mtd) & NAND_STATUS_READY)) ;
+ while (!(chip->read_byte(mtd) & NAND_STATUS_READY))
+ ;
return;
case NAND_CMD_RNDOUT:
@@ -784,7 +786,7 @@ nand_get_device(struct nand_chip *chip, struct mtd_info *mtd, int new_state)
spinlock_t *lock = &chip->controller->lock;
wait_queue_head_t *wq = &chip->controller->wq;
DECLARE_WAITQUEUE(wait, current);
- retry:
+retry:
spin_lock(lock);
/* Hardware controller shared among independent devices */
@@ -834,7 +836,7 @@ static void panic_nand_wait(struct mtd_info *mtd, struct nand_chip *chip,
break;
}
mdelay(1);
- }
+ }
}
/**
@@ -980,6 +982,7 @@ out:
return ret;
}
+EXPORT_SYMBOL(nand_unlock);
/**
* nand_lock - [REPLACEABLE] locks all blocks present in the device
@@ -1049,6 +1052,7 @@ out:
return ret;
}
+EXPORT_SYMBOL(nand_lock);
/**
* nand_read_page_raw - [Intern] read raw page data without ecc
@@ -1076,8 +1080,9 @@ static int nand_read_page_raw(struct mtd_info *mtd, struct nand_chip *chip,
*
* We need a special oob layout and handling even when OOB isn't used.
*/
-static int nand_read_page_raw_syndrome(struct mtd_info *mtd, struct nand_chip *chip,
- uint8_t *buf, int page)
+static int nand_read_page_raw_syndrome(struct mtd_info *mtd,
+ struct nand_chip *chip,
+ uint8_t *buf, int page)
{
int eccsize = chip->ecc.size;
int eccbytes = chip->ecc.bytes;
@@ -1158,7 +1163,8 @@ static int nand_read_page_swecc(struct mtd_info *mtd, struct nand_chip *chip,
* @readlen: data length
* @bufpoi: buffer to store read data
*/
-static int nand_read_subpage(struct mtd_info *mtd, struct nand_chip *chip, uint32_t data_offs, uint32_t readlen, uint8_t *bufpoi)
+static int nand_read_subpage(struct mtd_info *mtd, struct nand_chip *chip,
+ uint32_t data_offs, uint32_t readlen, uint8_t *bufpoi)
{
int start_step, end_step, num_steps;
uint32_t *eccpos = chip->ecc.layout->eccpos;
@@ -1166,6 +1172,7 @@ static int nand_read_subpage(struct mtd_info *mtd, struct nand_chip *chip, uint3
int data_col_addr, i, gaps = 0;
int datafrag_len, eccfrag_len, aligned_len, aligned_pos;
int busw = (chip->options & NAND_BUSWIDTH_16) ? 2 : 1;
+ int index = 0;
/* Column address wihin the page aligned to ECC size (256bytes). */
start_step = data_offs / chip->ecc.size;
@@ -1204,26 +1211,30 @@ static int nand_read_subpage(struct mtd_info *mtd, struct nand_chip *chip, uint3
} else {
/* send the command to read the particular ecc bytes */
/* take care about buswidth alignment in read_buf */
- aligned_pos = eccpos[start_step * chip->ecc.bytes] & ~(busw - 1);
+ index = start_step * chip->ecc.bytes;
+
+ aligned_pos = eccpos[index] & ~(busw - 1);
aligned_len = eccfrag_len;
- if (eccpos[start_step * chip->ecc.bytes] & (busw - 1))
+ if (eccpos[index] & (busw - 1))
aligned_len++;
- if (eccpos[(start_step + num_steps) * chip->ecc.bytes] & (busw - 1))
+ if (eccpos[index + (num_steps * chip->ecc.bytes)] & (busw - 1))
aligned_len++;
- chip->cmdfunc(mtd, NAND_CMD_RNDOUT, mtd->writesize + aligned_pos, -1);
+ chip->cmdfunc(mtd, NAND_CMD_RNDOUT,
+ mtd->writesize + aligned_pos, -1);
chip->read_buf(mtd, &chip->oob_poi[aligned_pos], aligned_len);
}
for (i = 0; i < eccfrag_len; i++)
- chip->buffers->ecccode[i] = chip->oob_poi[eccpos[i + start_step * chip->ecc.bytes]];
+ chip->buffers->ecccode[i] = chip->oob_poi[eccpos[i + index]];
p = bufpoi + data_col_addr;
for (i = 0; i < eccfrag_len ; i += chip->ecc.bytes, p += chip->ecc.size) {
int stat;
- stat = chip->ecc.correct(mtd, p, &chip->buffers->ecccode[i], &chip->buffers->ecccalc[i]);
- if (stat == -1)
+ stat = chip->ecc.correct(mtd, p,
+ &chip->buffers->ecccode[i], &chip->buffers->ecccalc[i]);
+ if (stat < 0)
mtd->ecc_stats.failed++;
else
mtd->ecc_stats.corrected += stat;
@@ -1390,7 +1401,7 @@ static int nand_read_page_syndrome(struct mtd_info *mtd, struct nand_chip *chip,
static uint8_t *nand_transfer_oob(struct nand_chip *chip, uint8_t *oob,
struct mtd_oob_ops *ops, size_t len)
{
- switch(ops->mode) {
+ switch (ops->mode) {
case MTD_OOB_PLACE:
case MTD_OOB_RAW:
@@ -1402,7 +1413,7 @@ static uint8_t *nand_transfer_oob(struct nand_chip *chip, uint8_t *oob,
uint32_t boffs = 0, roffs = ops->ooboffs;
size_t bytes = 0;
- for(; free->length && len; free++, len -= bytes) {
+ for (; free->length && len; free++, len -= bytes) {
/* Read request not from offset 0 ? */
if (unlikely(roffs)) {
if (roffs >= free->length) {
@@ -1466,7 +1477,7 @@ static int nand_do_read_ops(struct mtd_info *mtd, loff_t from,
buf = ops->datbuf;
oob = ops->oobbuf;
- while(1) {
+ while (1) {
bytes = min(mtd->writesize - col, readlen);
aligned = (bytes == mtd->writesize);
@@ -1484,7 +1495,8 @@ static int nand_do_read_ops(struct mtd_info *mtd, loff_t from,
ret = chip->ecc.read_page_raw(mtd, chip,
bufpoi, page);
else if (!aligned && NAND_SUBPAGE_READ(chip) && !oob)
- ret = chip->ecc.read_subpage(mtd, chip, col, bytes, bufpoi);
+ ret = chip->ecc.read_subpage(mtd, chip,
+ col, bytes, bufpoi);
else
ret = chip->ecc.read_page(mtd, chip, bufpoi,
page);
@@ -1493,7 +1505,8 @@ static int nand_do_read_ops(struct mtd_info *mtd, loff_t from,
/* Transfer not aligned data */
if (!aligned) {
- if (!NAND_SUBPAGE_READ(chip) && !oob)
+ if (!NAND_SUBPAGE_READ(chip) && !oob &&
+ !(mtd->ecc_stats.failed - stats.failed))
chip->pagebuf = realpage;
memcpy(buf, chip->buffers->databuf + col, bytes);
}
@@ -1791,7 +1804,7 @@ static int nand_do_read_oob(struct mtd_info *mtd, loff_t from,
realpage = (int)(from >> chip->page_shift);
page = realpage & chip->pagemask;
- while(1) {
+ while (1) {
sndcmd = chip->ecc.read_oob(mtd, chip, page, sndcmd);
len = min(len, readlen);
@@ -1861,7 +1874,7 @@ static int nand_read_oob(struct mtd_info *mtd, loff_t from,
nand_get_device(chip, mtd, FL_READING);
- switch(ops->mode) {
+ switch (ops->mode) {
case MTD_OOB_PLACE:
case MTD_OOB_AUTO:
case MTD_OOB_RAW:
@@ -1876,7 +1889,7 @@ static int nand_read_oob(struct mtd_info *mtd, loff_t from,
else
ret = nand_do_read_ops(mtd, from, ops);
- out:
+out:
nand_release_device(mtd);
return ret;
}
@@ -1905,8 +1918,9 @@ static void nand_write_page_raw(struct mtd_info *mtd, struct nand_chip *chip,
*
* We need a special oob layout and handling even when ECC isn't checked.
*/
-static void nand_write_page_raw_syndrome(struct mtd_info *mtd, struct nand_chip *chip,
- const uint8_t *buf)
+static void nand_write_page_raw_syndrome(struct mtd_info *mtd,
+ struct nand_chip *chip,
+ const uint8_t *buf)
{
int eccsize = chip->ecc.size;
int eccbytes = chip->ecc.bytes;
@@ -2099,7 +2113,7 @@ static int nand_write_page(struct mtd_info *mtd, struct nand_chip *chip,
static uint8_t *nand_fill_oob(struct nand_chip *chip, uint8_t *oob, size_t len,
struct mtd_oob_ops *ops)
{
- switch(ops->mode) {
+ switch (ops->mode) {
case MTD_OOB_PLACE:
case MTD_OOB_RAW:
@@ -2111,7 +2125,7 @@ static uint8_t *nand_fill_oob(struct nand_chip *chip, uint8_t *oob, size_t len,
uint32_t boffs = 0, woffs = ops->ooboffs;
size_t bytes = 0;
- for(; free->length && len; free++, len -= bytes) {
+ for (; free->length && len; free++, len -= bytes) {
/* Write request not from offset 0 ? */
if (unlikely(woffs)) {
if (woffs >= free->length) {
@@ -2137,7 +2151,7 @@ static uint8_t *nand_fill_oob(struct nand_chip *chip, uint8_t *oob, size_t len,
return NULL;
}
-#define NOTALIGNED(x) (x & (chip->subpagesize - 1)) != 0
+#define NOTALIGNED(x) ((x & (chip->subpagesize - 1)) != 0)
/**
* nand_do_write_ops - [Internal] NAND write with ECC
@@ -2200,10 +2214,10 @@ static int nand_do_write_ops(struct mtd_info *mtd, loff_t to,
memset(chip->oob_poi, 0xff, mtd->oobsize);
/* Don't allow multipage oob writes with offset */
- if (ops->ooboffs && (ops->ooboffs + ops->ooblen > oobmaxlen))
+ if (oob && ops->ooboffs && (ops->ooboffs + ops->ooblen > oobmaxlen))
return -EINVAL;
- while(1) {
+ while (1) {
int bytes = mtd->writesize;
int cached = writelen > bytes && page != blockmask;
uint8_t *wbuf = buf;
@@ -2431,7 +2445,7 @@ static int nand_write_oob(struct mtd_info *mtd, loff_t to,
nand_get_device(chip, mtd, FL_WRITING);
- switch(ops->mode) {
+ switch (ops->mode) {
case MTD_OOB_PLACE:
case MTD_OOB_AUTO:
case MTD_OOB_RAW:
@@ -2446,7 +2460,7 @@ static int nand_write_oob(struct mtd_info *mtd, loff_t to,
else
ret = nand_do_write_ops(mtd, to, ops);
- out:
+out:
nand_release_device(mtd);
return ret;
}
@@ -2511,7 +2525,7 @@ int nand_erase_nand(struct mtd_info *mtd, struct erase_info *instr,
{
int page, status, pages_per_block, ret, chipnr;
struct nand_chip *chip = mtd->priv;
- loff_t rewrite_bbt[NAND_MAX_CHIPS]={0};
+ loff_t rewrite_bbt[NAND_MAX_CHIPS] = {0};
unsigned int bbt_masked_page = 0xffffffff;
loff_t len;
@@ -2632,7 +2646,7 @@ int nand_erase_nand(struct mtd_info *mtd, struct erase_info *instr,
}
instr->state = MTD_ERASE_DONE;
- erase_exit:
+erase_exit:
ret = instr->state == MTD_ERASE_DONE ? 0 : -EIO;
@@ -2706,7 +2720,8 @@ static int nand_block_markbad(struct mtd_info *mtd, loff_t ofs)
struct nand_chip *chip = mtd->priv;
int ret;
- if ((ret = nand_block_isbad(mtd, ofs))) {
+ ret = nand_block_isbad(mtd, ofs);
+ if (ret) {
/* If it was bad already, return success and do nothing. */
if (ret > 0)
return 0;
@@ -2787,15 +2802,115 @@ static void nand_set_defaults(struct nand_chip *chip, int busw)
}
/*
+ * sanitize ONFI strings so we can safely print them
+ */
+static void sanitize_string(uint8_t *s, size_t len)
+{
+ ssize_t i;
+
+ /* null terminate */
+ s[len - 1] = 0;
+
+ /* remove non printable chars */
+ for (i = 0; i < len - 1; i++) {
+ if (s[i] < ' ' || s[i] > 127)
+ s[i] = '?';
+ }
+
+ /* remove trailing spaces */
+ strim(s);
+}
+
+static u16 onfi_crc16(u16 crc, u8 const *p, size_t len)
+{
+ int i;
+ while (len--) {
+ crc ^= *p++ << 8;
+ for (i = 0; i < 8; i++)
+ crc = (crc << 1) ^ ((crc & 0x8000) ? 0x8005 : 0);
+ }
+
+ return crc;
+}
+
+/*
+ * Check if the NAND chip is ONFI compliant, returns 1 if it is, 0 otherwise
+ */
+static int nand_flash_detect_onfi(struct mtd_info *mtd, struct nand_chip *chip,
+ int busw)
+{
+ struct nand_onfi_params *p = &chip->onfi_params;
+ int i;
+ int val;
+
+ /* try ONFI for unknow chip or LP */
+ chip->cmdfunc(mtd, NAND_CMD_READID, 0x20, -1);
+ if (chip->read_byte(mtd) != 'O' || chip->read_byte(mtd) != 'N' ||
+ chip->read_byte(mtd) != 'F' || chip->read_byte(mtd) != 'I')
+ return 0;
+
+ printk(KERN_INFO "ONFI flash detected\n");
+ chip->cmdfunc(mtd, NAND_CMD_PARAM, 0, -1);
+ for (i = 0; i < 3; i++) {
+ chip->read_buf(mtd, (uint8_t *)p, sizeof(*p));
+ if (onfi_crc16(ONFI_CRC_BASE, (uint8_t *)p, 254) ==
+ le16_to_cpu(p->crc)) {
+ printk(KERN_INFO "ONFI param page %d valid\n", i);
+ break;
+ }
+ }
+
+ if (i == 3)
+ return 0;
+
+ /* check version */
+ val = le16_to_cpu(p->revision);
+ if (val == 1 || val > (1 << 4)) {
+ printk(KERN_INFO "%s: unsupported ONFI version: %d\n",
+ __func__, val);
+ return 0;
+ }
+
+ if (val & (1 << 4))
+ chip->onfi_version = 22;
+ else if (val & (1 << 3))
+ chip->onfi_version = 21;
+ else if (val & (1 << 2))
+ chip->onfi_version = 20;
+ else
+ chip->onfi_version = 10;
+
+ sanitize_string(p->manufacturer, sizeof(p->manufacturer));
+ sanitize_string(p->model, sizeof(p->model));
+ if (!mtd->name)
+ mtd->name = p->model;
+ mtd->writesize = le32_to_cpu(p->byte_per_page);
+ mtd->erasesize = le32_to_cpu(p->pages_per_block) * mtd->writesize;
+ mtd->oobsize = le16_to_cpu(p->spare_bytes_per_page);
+ chip->chipsize = le32_to_cpu(p->blocks_per_lun) * mtd->erasesize;
+ busw = 0;
+ if (le16_to_cpu(p->features) & 1)
+ busw = NAND_BUSWIDTH_16;
+
+ chip->options &= ~NAND_CHIPOPTIONS_MSK;
+ chip->options |= (NAND_NO_READRDY |
+ NAND_NO_AUTOINCR) & NAND_CHIPOPTIONS_MSK;
+
+ return 1;
+}
+
+/*
* Get the flash and manufacturer id and lookup if the type is supported
*/
static struct nand_flash_dev *nand_get_flash_type(struct mtd_info *mtd,
struct nand_chip *chip,
- int busw, int *maf_id,
+ int busw,
+ int *maf_id, int *dev_id,
struct nand_flash_dev *type)
{
- int i, dev_id, maf_idx;
+ int i, maf_idx;
u8 id_data[8];
+ int ret;
/* Select the device */
chip->select_chip(mtd, 0);
@@ -2811,7 +2926,7 @@ static struct nand_flash_dev *nand_get_flash_type(struct mtd_info *mtd,
/* Read manufacturer and device IDs */
*maf_id = chip->read_byte(mtd);
- dev_id = chip->read_byte(mtd);
+ *dev_id = chip->read_byte(mtd);
/* Try again to make sure, as some systems the bus-hold or other
* interface concerns can cause random data which looks like a
@@ -2821,15 +2936,13 @@ static struct nand_flash_dev *nand_get_flash_type(struct mtd_info *mtd,
chip->cmdfunc(mtd, NAND_CMD_READID, 0x00, -1);
- /* Read entire ID string */
-
- for (i = 0; i < 8; i++)
+ for (i = 0; i < 2; i++)
id_data[i] = chip->read_byte(mtd);
- if (id_data[0] != *maf_id || id_data[1] != dev_id) {
+ if (id_data[0] != *maf_id || id_data[1] != *dev_id) {
printk(KERN_INFO "%s: second ID read did not match "
"%02x,%02x against %02x,%02x\n", __func__,
- *maf_id, dev_id, id_data[0], id_data[1]);
+ *maf_id, *dev_id, id_data[0], id_data[1]);
return ERR_PTR(-ENODEV);
}
@@ -2837,8 +2950,23 @@ static struct nand_flash_dev *nand_get_flash_type(struct mtd_info *mtd,
type = nand_flash_ids;
for (; type->name != NULL; type++)
- if (dev_id == type->id)
- break;
+ if (*dev_id == type->id)
+ break;
+
+ chip->onfi_version = 0;
+ if (!type->name || !type->pagesize) {
+ /* Check is chip is ONFI compliant */
+ ret = nand_flash_detect_onfi(mtd, chip, busw);
+ if (ret)
+ goto ident_done;
+ }
+
+ chip->cmdfunc(mtd, NAND_CMD_READID, 0x00, -1);
+
+ /* Read entire ID string */
+
+ for (i = 0; i < 8; i++)
+ id_data[i] = chip->read_byte(mtd);
if (!type->name)
return ERR_PTR(-ENODEV);
@@ -2848,8 +2976,10 @@ static struct nand_flash_dev *nand_get_flash_type(struct mtd_info *mtd,
chip->chipsize = (uint64_t)type->chipsize << 20;
- /* Newer devices have all the information in additional id bytes */
- if (!type->pagesize) {
+ if (!type->pagesize && chip->init_size) {
+ /* set the pagesize, oobsize, erasesize by the driver*/
+ busw = chip->init_size(mtd, chip, id_data);
+ } else if (!type->pagesize) {
int extid;
/* The 3rd id byte holds MLC / multichip data */
chip->cellinfo = id_data[2];
@@ -2859,7 +2989,7 @@ static struct nand_flash_dev *nand_get_flash_type(struct mtd_info *mtd,
/*
* Field definitions are in the following datasheets:
* Old style (4,5 byte ID): Samsung K9GAG08U0M (p.32)
- * New style (6 byte ID): Samsung K9GAG08U0D (p.40)
+ * New style (6 byte ID): Samsung K9GBG08U0M (p.40)
*
* Check for wraparound + Samsung ID + nonzero 6th byte
* to decide what to do.
@@ -2872,7 +3002,20 @@ static struct nand_flash_dev *nand_get_flash_type(struct mtd_info *mtd,
mtd->writesize = 2048 << (extid & 0x03);
extid >>= 2;
/* Calc oobsize */
- mtd->oobsize = (extid & 0x03) == 0x01 ? 128 : 218;
+ switch (extid & 0x03) {
+ case 1:
+ mtd->oobsize = 128;
+ break;
+ case 2:
+ mtd->oobsize = 218;
+ break;
+ case 3:
+ mtd->oobsize = 400;
+ break;
+ default:
+ mtd->oobsize = 436;
+ break;
+ }
extid >>= 2;
/* Calc blocksize */
mtd->erasesize = (128 * 1024) <<
@@ -2900,7 +3043,35 @@ static struct nand_flash_dev *nand_get_flash_type(struct mtd_info *mtd,
mtd->writesize = type->pagesize;
mtd->oobsize = mtd->writesize / 32;
busw = type->options & NAND_BUSWIDTH_16;
+
+ /*
+ * Check for Spansion/AMD ID + repeating 5th, 6th byte since
+ * some Spansion chips have erasesize that conflicts with size
+ * listed in nand_ids table
+ * Data sheet (5 byte ID): Spansion S30ML-P ORNAND (p.39)
+ */
+ if (*maf_id == NAND_MFR_AMD && id_data[4] != 0x00 &&
+ id_data[5] == 0x00 && id_data[6] == 0x00 &&
+ id_data[7] == 0x00 && mtd->writesize == 512) {
+ mtd->erasesize = 128 * 1024;
+ mtd->erasesize <<= ((id_data[3] & 0x03) << 1);
+ }
}
+ /* Get chip options, preserve non chip based options */
+ chip->options &= ~NAND_CHIPOPTIONS_MSK;
+ chip->options |= type->options & NAND_CHIPOPTIONS_MSK;
+
+ /* Check if chip is a not a samsung device. Do not clear the
+ * options for chips which are not having an extended id.
+ */
+ if (*maf_id != NAND_MFR_SAMSUNG && !type->pagesize)
+ chip->options &= ~NAND_SAMSUNG_LP_OPTIONS;
+ident_done:
+
+ /*
+ * Set chip as a default. Board drivers can override it, if necessary
+ */
+ chip->options |= NAND_NO_AUTOINCR;
/* Try to identify manufacturer */
for (maf_idx = 0; nand_manuf_ids[maf_idx].id != 0x0; maf_idx++) {
@@ -2915,7 +3086,7 @@ static struct nand_flash_dev *nand_get_flash_type(struct mtd_info *mtd,
if (busw != (chip->options & NAND_BUSWIDTH_16)) {
printk(KERN_INFO "NAND device: Manufacturer ID:"
" 0x%02x, Chip ID: 0x%02x (%s %s)\n", *maf_id,
- dev_id, nand_manuf_ids[maf_idx].name, mtd->name);
+ *dev_id, nand_manuf_ids[maf_idx].name, mtd->name);
printk(KERN_WARNING "NAND bus width %d instead %d bit\n",
(chip->options & NAND_BUSWIDTH_16) ? 16 : 8,
busw ? 16 : 8);
@@ -2931,8 +3102,10 @@ static struct nand_flash_dev *nand_get_flash_type(struct mtd_info *mtd,
ffs(mtd->erasesize) - 1;
if (chip->chipsize & 0xffffffff)
chip->chip_shift = ffs((unsigned)chip->chipsize) - 1;
- else
- chip->chip_shift = ffs((unsigned)(chip->chipsize >> 32)) + 32 - 1;
+ else {
+ chip->chip_shift = ffs((unsigned)(chip->chipsize >> 32));
+ chip->chip_shift += 32 - 1;
+ }
/* Set the bad block position */
if (mtd->writesize > 512 || (busw & NAND_BUSWIDTH_16))
@@ -2940,27 +3113,12 @@ static struct nand_flash_dev *nand_get_flash_type(struct mtd_info *mtd,
else
chip->badblockpos = NAND_SMALL_BADBLOCK_POS;
- /* Get chip options, preserve non chip based options */
- chip->options &= ~NAND_CHIPOPTIONS_MSK;
- chip->options |= type->options & NAND_CHIPOPTIONS_MSK;
-
- /*
- * Set chip as a default. Board drivers can override it, if necessary
- */
- chip->options |= NAND_NO_AUTOINCR;
-
- /* Check if chip is a not a samsung device. Do not clear the
- * options for chips which are not having an extended id.
- */
- if (*maf_id != NAND_MFR_SAMSUNG && !type->pagesize)
- chip->options &= ~NAND_SAMSUNG_LP_OPTIONS;
-
/*
* Bad block marker is stored in the last page of each block
* on Samsung and Hynix MLC devices; stored in first two pages
* of each block on Micron devices with 2KiB pages and on
- * SLC Samsung, Hynix, and AMD/Spansion. All others scan only
- * the first page.
+ * SLC Samsung, Hynix, Toshiba and AMD/Spansion. All others scan
+ * only the first page.
*/
if ((chip->cellinfo & NAND_CI_CELLTYPE_MSK) &&
(*maf_id == NAND_MFR_SAMSUNG ||
@@ -2969,6 +3127,7 @@ static struct nand_flash_dev *nand_get_flash_type(struct mtd_info *mtd,
else if ((!(chip->cellinfo & NAND_CI_CELLTYPE_MSK) &&
(*maf_id == NAND_MFR_SAMSUNG ||
*maf_id == NAND_MFR_HYNIX ||
+ *maf_id == NAND_MFR_TOSHIBA ||
*maf_id == NAND_MFR_AMD)) ||
(mtd->writesize == 2048 &&
*maf_id == NAND_MFR_MICRON))
@@ -2994,9 +3153,11 @@ static struct nand_flash_dev *nand_get_flash_type(struct mtd_info *mtd,
if (mtd->writesize > 512 && chip->cmdfunc == nand_command)
chip->cmdfunc = nand_command_lp;
+ /* TODO onfi flash name */
printk(KERN_INFO "NAND device: Manufacturer ID:"
- " 0x%02x, Chip ID: 0x%02x (%s %s)\n", *maf_id, dev_id,
- nand_manuf_ids[maf_idx].name, type->name);
+ " 0x%02x, Chip ID: 0x%02x (%s %s)\n", *maf_id, *dev_id,
+ nand_manuf_ids[maf_idx].name,
+ chip->onfi_version ? type->name : chip->onfi_params.model);
return type;
}
@@ -3015,7 +3176,7 @@ static struct nand_flash_dev *nand_get_flash_type(struct mtd_info *mtd,
int nand_scan_ident(struct mtd_info *mtd, int maxchips,
struct nand_flash_dev *table)
{
- int i, busw, nand_maf_id;
+ int i, busw, nand_maf_id, nand_dev_id;
struct nand_chip *chip = mtd->priv;
struct nand_flash_dev *type;
@@ -3025,7 +3186,8 @@ int nand_scan_ident(struct mtd_info *mtd, int maxchips,
nand_set_defaults(chip, busw);
/* Read the flash type */
- type = nand_get_flash_type(mtd, chip, busw, &nand_maf_id, table);
+ type = nand_get_flash_type(mtd, chip, busw,
+ &nand_maf_id, &nand_dev_id, table);
if (IS_ERR(type)) {
if (!(chip->options & NAND_SCAN_SILENT_NODEV))
@@ -3043,7 +3205,7 @@ int nand_scan_ident(struct mtd_info *mtd, int maxchips,
chip->cmdfunc(mtd, NAND_CMD_READID, 0x00, -1);
/* Read manufacturer and device IDs */
if (nand_maf_id != chip->read_byte(mtd) ||
- type->id != chip->read_byte(mtd))
+ nand_dev_id != chip->read_byte(mtd))
break;
}
if (i > 1)
@@ -3055,6 +3217,7 @@ int nand_scan_ident(struct mtd_info *mtd, int maxchips,
return 0;
}
+EXPORT_SYMBOL(nand_scan_ident);
/**
@@ -3219,7 +3382,7 @@ int nand_scan_tail(struct mtd_info *mtd)
* mode
*/
chip->ecc.steps = mtd->writesize / chip->ecc.size;
- if(chip->ecc.steps * chip->ecc.size != mtd->writesize) {
+ if (chip->ecc.steps * chip->ecc.size != mtd->writesize) {
printk(KERN_WARNING "Invalid ecc parameters\n");
BUG();
}
@@ -3231,7 +3394,7 @@ int nand_scan_tail(struct mtd_info *mtd)
*/
if (!(chip->options & NAND_NO_SUBPAGE_WRITE) &&
!(chip->cellinfo & NAND_CI_CELLTYPE_MSK)) {
- switch(chip->ecc.steps) {
+ switch (chip->ecc.steps) {
case 2:
mtd->subpage_sft = 1;
break;
@@ -3283,10 +3446,11 @@ int nand_scan_tail(struct mtd_info *mtd)
/* Build bad block table */
return chip->scan_bbt(mtd);
}
+EXPORT_SYMBOL(nand_scan_tail);
/* is_module_text_address() isn't exported, and it's mostly a pointless
- test if this is a module _anyway_ -- they'd have to try _really_ hard
- to call us from in-kernel code if the core NAND support is modular. */
+ * test if this is a module _anyway_ -- they'd have to try _really_ hard
+ * to call us from in-kernel code if the core NAND support is modular. */
#ifdef MODULE
#define caller_is_module() (1)
#else
@@ -3322,6 +3486,7 @@ int nand_scan(struct mtd_info *mtd, int maxchips)
ret = nand_scan_tail(mtd);
return ret;
}
+EXPORT_SYMBOL(nand_scan);
/**
* nand_release - [NAND Interface] Free resources held by the NAND device
@@ -3348,12 +3513,6 @@ void nand_release(struct mtd_info *mtd)
& NAND_BBT_DYNAMICSTRUCT)
kfree(chip->badblock_pattern);
}
-
-EXPORT_SYMBOL_GPL(nand_lock);
-EXPORT_SYMBOL_GPL(nand_unlock);
-EXPORT_SYMBOL_GPL(nand_scan);
-EXPORT_SYMBOL_GPL(nand_scan_ident);
-EXPORT_SYMBOL_GPL(nand_scan_tail);
EXPORT_SYMBOL_GPL(nand_release);
static int __init nand_base_init(void)
@@ -3371,5 +3530,6 @@ module_init(nand_base_init);
module_exit(nand_base_exit);
MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Steven J. Hill <sjhill@realitydiluted.com>, Thomas Gleixner <tglx@linutronix.de>");
+MODULE_AUTHOR("Steven J. Hill <sjhill@realitydiluted.com>");
+MODULE_AUTHOR("Thomas Gleixner <tglx@linutronix.de>");
MODULE_DESCRIPTION("Generic NAND flash driver code");
diff --git a/drivers/mtd/nand/nand_bbt.c b/drivers/mtd/nand/nand_bbt.c
index 5fedf4a74f1..586b981f0e6 100644
--- a/drivers/mtd/nand/nand_bbt.c
+++ b/drivers/mtd/nand/nand_bbt.c
@@ -13,28 +13,37 @@
* Description:
*
* When nand_scan_bbt is called, then it tries to find the bad block table
- * depending on the options in the bbt descriptor(s). If a bbt is found
- * then the contents are read and the memory based bbt is created. If a
- * mirrored bbt is selected then the mirror is searched too and the
- * versions are compared. If the mirror has a greater version number
- * than the mirror bbt is used to build the memory based bbt.
+ * depending on the options in the BBT descriptor(s). If no flash based BBT
+ * (NAND_USE_FLASH_BBT) is specified then the device is scanned for factory
+ * marked good / bad blocks. This information is used to create a memory BBT.
+ * Once a new bad block is discovered then the "factory" information is updated
+ * on the device.
+ * If a flash based BBT is specified then the function first tries to find the
+ * BBT on flash. If a BBT is found then the contents are read and the memory
+ * based BBT is created. If a mirrored BBT is selected then the mirror is
+ * searched too and the versions are compared. If the mirror has a greater
+ * version number than the mirror BBT is used to build the memory based BBT.
* If the tables are not versioned, then we "or" the bad block information.
- * If one of the bbt's is out of date or does not exist it is (re)created.
- * If no bbt exists at all then the device is scanned for factory marked
+ * If one of the BBTs is out of date or does not exist it is (re)created.
+ * If no BBT exists at all then the device is scanned for factory marked
* good / bad blocks and the bad block tables are created.
*
- * For manufacturer created bbts like the one found on M-SYS DOC devices
- * the bbt is searched and read but never created
+ * For manufacturer created BBTs like the one found on M-SYS DOC devices
+ * the BBT is searched and read but never created
*
- * The autogenerated bad block table is located in the last good blocks
+ * The auto generated bad block table is located in the last good blocks
* of the device. The table is mirrored, so it can be updated eventually.
- * The table is marked in the oob area with an ident pattern and a version
- * number which indicates which of both tables is more up to date.
+ * The table is marked in the OOB area with an ident pattern and a version
+ * number which indicates which of both tables is more up to date. If the NAND
+ * controller needs the complete OOB area for the ECC information then the
+ * option NAND_USE_FLASH_BBT_NO_OOB should be used: it moves the ident pattern
+ * and the version byte into the data area and the OOB area will remain
+ * untouched.
*
* The table uses 2 bits per block
- * 11b: block is good
- * 00b: block is factory marked bad
- * 01b, 10b: block is marked bad due to wear
+ * 11b: block is good
+ * 00b: block is factory marked bad
+ * 01b, 10b: block is marked bad due to wear
*
* The memory bad block table uses the following scheme:
* 00b: block is good
@@ -59,6 +68,16 @@
#include <linux/delay.h>
#include <linux/vmalloc.h>
+static int check_pattern_no_oob(uint8_t *buf, struct nand_bbt_descr *td)
+{
+ int ret;
+
+ ret = memcmp(buf, td->pattern, td->len);
+ if (!ret)
+ return ret;
+ return -1;
+}
+
/**
* check_pattern - [GENERIC] check if a pattern is in the buffer
* @buf: the buffer to search
@@ -77,6 +96,9 @@ static int check_pattern(uint8_t *buf, int len, int paglen, struct nand_bbt_desc
int i, end = 0;
uint8_t *p = buf;
+ if (td->options & NAND_BBT_NO_OOB)
+ return check_pattern_no_oob(buf, td);
+
end = paglen + td->offs;
if (td->options & NAND_BBT_SCANEMPTY) {
for (i = 0; i < end; i++) {
@@ -156,32 +178,63 @@ static int check_short_pattern(uint8_t *buf, struct nand_bbt_descr *td)
}
/**
+ * add_marker_len - compute the length of the marker in data area
+ * @td: BBT descriptor used for computation
+ *
+ * The length will be 0 if the markeris located in OOB area.
+ */
+static u32 add_marker_len(struct nand_bbt_descr *td)
+{
+ u32 len;
+
+ if (!(td->options & NAND_BBT_NO_OOB))
+ return 0;
+
+ len = td->len;
+ if (td->options & NAND_BBT_VERSION)
+ len++;
+ return len;
+}
+
+/**
* read_bbt - [GENERIC] Read the bad block table starting from page
* @mtd: MTD device structure
* @buf: temporary buffer
* @page: the starting page
* @num: the number of bbt descriptors to read
- * @bits: number of bits per block
+ * @td: the bbt describtion table
* @offs: offset in the memory table
- * @reserved_block_code: Pattern to identify reserved blocks
*
* Read the bad block table starting from page.
*
*/
static int read_bbt(struct mtd_info *mtd, uint8_t *buf, int page, int num,
- int bits, int offs, int reserved_block_code)
+ struct nand_bbt_descr *td, int offs)
{
int res, i, j, act = 0;
struct nand_chip *this = mtd->priv;
size_t retlen, len, totlen;
loff_t from;
+ int bits = td->options & NAND_BBT_NRBITS_MSK;
uint8_t msk = (uint8_t) ((1 << bits) - 1);
+ u32 marker_len;
+ int reserved_block_code = td->reserved_block_code;
totlen = (num * bits) >> 3;
+ marker_len = add_marker_len(td);
from = ((loff_t) page) << this->page_shift;
while (totlen) {
len = min(totlen, (size_t) (1 << this->bbt_erase_shift));
+ if (marker_len) {
+ /*
+ * In case the BBT marker is not in the OOB area it
+ * will be just in the first page.
+ */
+ len -= marker_len;
+ from += marker_len;
+ marker_len = 0;
+ }
res = mtd->read(mtd, from, len, &retlen, buf);
if (res < 0) {
if (retlen != len) {
@@ -238,20 +291,21 @@ static int read_abs_bbt(struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_desc
{
struct nand_chip *this = mtd->priv;
int res = 0, i;
- int bits;
- bits = td->options & NAND_BBT_NRBITS_MSK;
if (td->options & NAND_BBT_PERCHIP) {
int offs = 0;
for (i = 0; i < this->numchips; i++) {
if (chip == -1 || chip == i)
- res = read_bbt (mtd, buf, td->pages[i], this->chipsize >> this->bbt_erase_shift, bits, offs, td->reserved_block_code);
+ res = read_bbt(mtd, buf, td->pages[i],
+ this->chipsize >> this->bbt_erase_shift,
+ td, offs);
if (res)
return res;
offs += this->chipsize >> (this->bbt_erase_shift + 2);
}
} else {
- res = read_bbt (mtd, buf, td->pages[0], mtd->size >> this->bbt_erase_shift, bits, 0, td->reserved_block_code);
+ res = read_bbt(mtd, buf, td->pages[0],
+ mtd->size >> this->bbt_erase_shift, td, 0);
if (res)
return res;
}
@@ -259,9 +313,25 @@ static int read_abs_bbt(struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_desc
}
/*
+ * BBT marker is in the first page, no OOB.
+ */
+static int scan_read_raw_data(struct mtd_info *mtd, uint8_t *buf, loff_t offs,
+ struct nand_bbt_descr *td)
+{
+ size_t retlen;
+ size_t len;
+
+ len = td->len;
+ if (td->options & NAND_BBT_VERSION)
+ len++;
+
+ return mtd->read(mtd, offs, len, &retlen, buf);
+}
+
+/*
* Scan read raw data from flash
*/
-static int scan_read_raw(struct mtd_info *mtd, uint8_t *buf, loff_t offs,
+static int scan_read_raw_oob(struct mtd_info *mtd, uint8_t *buf, loff_t offs,
size_t len)
{
struct mtd_oob_ops ops;
@@ -294,6 +364,15 @@ static int scan_read_raw(struct mtd_info *mtd, uint8_t *buf, loff_t offs,
return 0;
}
+static int scan_read_raw(struct mtd_info *mtd, uint8_t *buf, loff_t offs,
+ size_t len, struct nand_bbt_descr *td)
+{
+ if (td->options & NAND_BBT_NO_OOB)
+ return scan_read_raw_data(mtd, buf, offs, td);
+ else
+ return scan_read_raw_oob(mtd, buf, offs, len);
+}
+
/*
* Scan write data with oob to flash
*/
@@ -312,6 +391,15 @@ static int scan_write_bbt(struct mtd_info *mtd, loff_t offs, size_t len,
return mtd->write_oob(mtd, offs, &ops);
}
+static u32 bbt_get_ver_offs(struct mtd_info *mtd, struct nand_bbt_descr *td)
+{
+ u32 ver_offs = td->veroffs;
+
+ if (!(td->options & NAND_BBT_NO_OOB))
+ ver_offs += mtd->writesize;
+ return ver_offs;
+}
+
/**
* read_abs_bbts - [GENERIC] Read the bad block table(s) for all chips starting at a given page
* @mtd: MTD device structure
@@ -331,8 +419,8 @@ static int read_abs_bbts(struct mtd_info *mtd, uint8_t *buf,
/* Read the primary version, if available */
if (td->options & NAND_BBT_VERSION) {
scan_read_raw(mtd, buf, (loff_t)td->pages[0] << this->page_shift,
- mtd->writesize);
- td->version[0] = buf[mtd->writesize + td->veroffs];
+ mtd->writesize, td);
+ td->version[0] = buf[bbt_get_ver_offs(mtd, td)];
printk(KERN_DEBUG "Bad block table at page %d, version 0x%02X\n",
td->pages[0], td->version[0]);
}
@@ -340,8 +428,8 @@ static int read_abs_bbts(struct mtd_info *mtd, uint8_t *buf,
/* Read the mirror version, if available */
if (md && (md->options & NAND_BBT_VERSION)) {
scan_read_raw(mtd, buf, (loff_t)md->pages[0] << this->page_shift,
- mtd->writesize);
- md->version[0] = buf[mtd->writesize + md->veroffs];
+ mtd->writesize, td);
+ md->version[0] = buf[bbt_get_ver_offs(mtd, md)];
printk(KERN_DEBUG "Bad block table at page %d, version 0x%02X\n",
md->pages[0], md->version[0]);
}
@@ -357,7 +445,7 @@ static int scan_block_full(struct mtd_info *mtd, struct nand_bbt_descr *bd,
{
int ret, j;
- ret = scan_read_raw(mtd, buf, offs, readlen);
+ ret = scan_read_raw_oob(mtd, buf, offs, readlen);
if (ret)
return ret;
@@ -464,6 +552,8 @@ static int create_bbt(struct mtd_info *mtd, uint8_t *buf,
for (i = startblock; i < numblocks;) {
int ret;
+ BUG_ON(bd->options & NAND_BBT_NO_OOB);
+
if (bd->options & NAND_BBT_SCANALLPAGES)
ret = scan_block_full(mtd, bd, from, buf, readlen,
scanlen, len);
@@ -545,11 +635,12 @@ static int search_bbt(struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_descr
loff_t offs = (loff_t)actblock << this->bbt_erase_shift;
/* Read first page */
- scan_read_raw(mtd, buf, offs, mtd->writesize);
+ scan_read_raw(mtd, buf, offs, mtd->writesize, td);
if (!check_pattern(buf, scanlen, mtd->writesize, td)) {
td->pages[i] = actblock << blocktopage;
if (td->options & NAND_BBT_VERSION) {
- td->version[i] = buf[mtd->writesize + td->veroffs];
+ offs = bbt_get_ver_offs(mtd, td);
+ td->version[i] = buf[offs];
}
break;
}
@@ -733,12 +824,26 @@ static int write_bbt(struct mtd_info *mtd, uint8_t *buf,
memset(&buf[offs], 0xff, (size_t) (numblocks >> sft));
ooboffs = len + (pageoffs * mtd->oobsize);
+ } else if (td->options & NAND_BBT_NO_OOB) {
+ ooboffs = 0;
+ offs = td->len;
+ /* the version byte */
+ if (td->options & NAND_BBT_VERSION)
+ offs++;
+ /* Calc length */
+ len = (size_t) (numblocks >> sft);
+ len += offs;
+ /* Make it page aligned ! */
+ len = ALIGN(len, mtd->writesize);
+ /* Preset the buffer with 0xff */
+ memset(buf, 0xff, len);
+ /* Pattern is located at the begin of first page */
+ memcpy(buf, td->pattern, td->len);
} else {
/* Calc length */
len = (size_t) (numblocks >> sft);
/* Make it page aligned ! */
- len = (len + (mtd->writesize - 1)) &
- ~(mtd->writesize - 1);
+ len = ALIGN(len, mtd->writesize);
/* Preset the buffer with 0xff */
memset(buf, 0xff, len +
(len >> this->page_shift)* mtd->oobsize);
@@ -772,7 +877,9 @@ static int write_bbt(struct mtd_info *mtd, uint8_t *buf,
if (res < 0)
goto outerr;
- res = scan_write_bbt(mtd, to, len, buf, &buf[len]);
+ res = scan_write_bbt(mtd, to, len, buf,
+ td->options & NAND_BBT_NO_OOB ? NULL :
+ &buf[len]);
if (res < 0)
goto outerr;
@@ -892,7 +999,8 @@ static int check_create(struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_desc
continue;
/* Create the table in memory by scanning the chip(s) */
- create_bbt(mtd, buf, bd, chipsel);
+ if (!(this->options & NAND_CREATE_EMPTY_BBT))
+ create_bbt(mtd, buf, bd, chipsel);
td->version[i] = 1;
if (md)
@@ -983,6 +1091,49 @@ static void mark_bbt_region(struct mtd_info *mtd, struct nand_bbt_descr *td)
}
/**
+ * verify_bbt_descr - verify the bad block description
+ * @bd: the table to verify
+ *
+ * This functions performs a few sanity checks on the bad block description
+ * table.
+ */
+static void verify_bbt_descr(struct mtd_info *mtd, struct nand_bbt_descr *bd)
+{
+ struct nand_chip *this = mtd->priv;
+ u32 pattern_len = bd->len;
+ u32 bits = bd->options & NAND_BBT_NRBITS_MSK;
+ u32 table_size;
+
+ if (!bd)
+ return;
+ BUG_ON((this->options & NAND_USE_FLASH_BBT_NO_OOB) &&
+ !(this->options & NAND_USE_FLASH_BBT));
+ BUG_ON(!bits);
+
+ if (bd->options & NAND_BBT_VERSION)
+ pattern_len++;
+
+ if (bd->options & NAND_BBT_NO_OOB) {
+ BUG_ON(!(this->options & NAND_USE_FLASH_BBT));
+ BUG_ON(!(this->options & NAND_USE_FLASH_BBT_NO_OOB));
+ BUG_ON(bd->offs);
+ if (bd->options & NAND_BBT_VERSION)
+ BUG_ON(bd->veroffs != bd->len);
+ BUG_ON(bd->options & NAND_BBT_SAVECONTENT);
+ }
+
+ if (bd->options & NAND_BBT_PERCHIP)
+ table_size = this->chipsize >> this->bbt_erase_shift;
+ else
+ table_size = mtd->size >> this->bbt_erase_shift;
+ table_size >>= 3;
+ table_size *= bits;
+ if (bd->options & NAND_BBT_NO_OOB)
+ table_size += pattern_len;
+ BUG_ON(table_size > (1 << this->bbt_erase_shift));
+}
+
+/**
* nand_scan_bbt - [NAND Interface] scan, find, read and maybe create bad block table(s)
* @mtd: MTD device structure
* @bd: descriptor for the good/bad block search pattern
@@ -1023,6 +1174,8 @@ int nand_scan_bbt(struct mtd_info *mtd, struct nand_bbt_descr *bd)
}
return res;
}
+ verify_bbt_descr(mtd, td);
+ verify_bbt_descr(mtd, md);
/* Allocate a temporary buffer for one eraseblock incl. oob */
len = (1 << this->bbt_erase_shift);
@@ -1166,6 +1319,26 @@ static struct nand_bbt_descr bbt_mirror_descr = {
.pattern = mirror_pattern
};
+static struct nand_bbt_descr bbt_main_no_bbt_descr = {
+ .options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE
+ | NAND_BBT_2BIT | NAND_BBT_VERSION | NAND_BBT_PERCHIP
+ | NAND_BBT_NO_OOB,
+ .len = 4,
+ .veroffs = 4,
+ .maxblocks = 4,
+ .pattern = bbt_pattern
+};
+
+static struct nand_bbt_descr bbt_mirror_no_bbt_descr = {
+ .options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE
+ | NAND_BBT_2BIT | NAND_BBT_VERSION | NAND_BBT_PERCHIP
+ | NAND_BBT_NO_OOB,
+ .len = 4,
+ .veroffs = 4,
+ .maxblocks = 4,
+ .pattern = mirror_pattern
+};
+
#define BBT_SCAN_OPTIONS (NAND_BBT_SCANLASTPAGE | NAND_BBT_SCAN2NDPAGE | \
NAND_BBT_SCANBYTE1AND6)
/**
@@ -1236,8 +1409,13 @@ int nand_default_bbt(struct mtd_info *mtd)
if (this->options & NAND_USE_FLASH_BBT) {
/* Use the default pattern descriptors */
if (!this->bbt_td) {
- this->bbt_td = &bbt_main_descr;
- this->bbt_md = &bbt_mirror_descr;
+ if (this->options & NAND_USE_FLASH_BBT_NO_OOB) {
+ this->bbt_td = &bbt_main_no_bbt_descr;
+ this->bbt_md = &bbt_mirror_no_bbt_descr;
+ } else {
+ this->bbt_td = &bbt_main_descr;
+ this->bbt_md = &bbt_mirror_descr;
+ }
}
if (!this->badblock_pattern) {
this->badblock_pattern = (mtd->writesize > 512) ? &largepage_flashbased : &smallpage_flashbased;
diff --git a/drivers/mtd/nand/nand_ids.c b/drivers/mtd/nand/nand_ids.c
index c65f19074bc..00cf1b0d605 100644
--- a/drivers/mtd/nand/nand_ids.c
+++ b/drivers/mtd/nand/nand_ids.c
@@ -75,9 +75,13 @@ struct nand_flash_dev nand_flash_ids[] = {
/*512 Megabit */
{"NAND 64MiB 1,8V 8-bit", 0xA2, 0, 64, 0, LP_OPTIONS},
+ {"NAND 64MiB 1,8V 8-bit", 0xA0, 0, 64, 0, LP_OPTIONS},
{"NAND 64MiB 3,3V 8-bit", 0xF2, 0, 64, 0, LP_OPTIONS},
+ {"NAND 64MiB 3,3V 8-bit", 0xD0, 0, 64, 0, LP_OPTIONS},
{"NAND 64MiB 1,8V 16-bit", 0xB2, 0, 64, 0, LP_OPTIONS16},
+ {"NAND 64MiB 1,8V 16-bit", 0xB0, 0, 64, 0, LP_OPTIONS16},
{"NAND 64MiB 3,3V 16-bit", 0xC2, 0, 64, 0, LP_OPTIONS16},
+ {"NAND 64MiB 3,3V 16-bit", 0xC0, 0, 64, 0, LP_OPTIONS16},
/* 1 Gigabit */
{"NAND 128MiB 1,8V 8-bit", 0xA1, 0, 128, 0, LP_OPTIONS},
@@ -112,7 +116,34 @@ struct nand_flash_dev nand_flash_ids[] = {
{"NAND 2GiB 3,3V 16-bit", 0xC5, 0, 2048, 0, LP_OPTIONS16},
/* 32 Gigabit */
+ {"NAND 4GiB 1,8V 8-bit", 0xA7, 0, 4096, 0, LP_OPTIONS},
{"NAND 4GiB 3,3V 8-bit", 0xD7, 0, 4096, 0, LP_OPTIONS},
+ {"NAND 4GiB 1,8V 16-bit", 0xB7, 0, 4096, 0, LP_OPTIONS16},
+ {"NAND 4GiB 3,3V 16-bit", 0xC7, 0, 4096, 0, LP_OPTIONS16},
+
+ /* 64 Gigabit */
+ {"NAND 8GiB 1,8V 8-bit", 0xAE, 0, 8192, 0, LP_OPTIONS},
+ {"NAND 8GiB 3,3V 8-bit", 0xDE, 0, 8192, 0, LP_OPTIONS},
+ {"NAND 8GiB 1,8V 16-bit", 0xBE, 0, 8192, 0, LP_OPTIONS16},
+ {"NAND 8GiB 3,3V 16-bit", 0xCE, 0, 8192, 0, LP_OPTIONS16},
+
+ /* 128 Gigabit */
+ {"NAND 16GiB 1,8V 8-bit", 0x1A, 0, 16384, 0, LP_OPTIONS},
+ {"NAND 16GiB 3,3V 8-bit", 0x3A, 0, 16384, 0, LP_OPTIONS},
+ {"NAND 16GiB 1,8V 16-bit", 0x2A, 0, 16384, 0, LP_OPTIONS16},
+ {"NAND 16GiB 3,3V 16-bit", 0x4A, 0, 16384, 0, LP_OPTIONS16},
+
+ /* 256 Gigabit */
+ {"NAND 32GiB 1,8V 8-bit", 0x1C, 0, 32768, 0, LP_OPTIONS},
+ {"NAND 32GiB 3,3V 8-bit", 0x3C, 0, 32768, 0, LP_OPTIONS},
+ {"NAND 32GiB 1,8V 16-bit", 0x2C, 0, 32768, 0, LP_OPTIONS16},
+ {"NAND 32GiB 3,3V 16-bit", 0x4C, 0, 32768, 0, LP_OPTIONS16},
+
+ /* 512 Gigabit */
+ {"NAND 64GiB 1,8V 8-bit", 0x1E, 0, 65536, 0, LP_OPTIONS},
+ {"NAND 64GiB 3,3V 8-bit", 0x3E, 0, 65536, 0, LP_OPTIONS},
+ {"NAND 64GiB 1,8V 16-bit", 0x2E, 0, 65536, 0, LP_OPTIONS16},
+ {"NAND 64GiB 3,3V 16-bit", 0x4E, 0, 65536, 0, LP_OPTIONS16},
/*
* Renesas AND 1 Gigabit. Those chips do not support extended id and
diff --git a/drivers/mtd/nand/nandsim.c b/drivers/mtd/nand/nandsim.c
index c25648bb579..a6a73aab125 100644
--- a/drivers/mtd/nand/nandsim.c
+++ b/drivers/mtd/nand/nandsim.c
@@ -107,6 +107,7 @@ static char *gravepages = NULL;
static unsigned int rptwear = 0;
static unsigned int overridesize = 0;
static char *cache_file = NULL;
+static unsigned int bbt;
module_param(first_id_byte, uint, 0400);
module_param(second_id_byte, uint, 0400);
@@ -130,6 +131,7 @@ module_param(gravepages, charp, 0400);
module_param(rptwear, uint, 0400);
module_param(overridesize, uint, 0400);
module_param(cache_file, charp, 0400);
+module_param(bbt, uint, 0400);
MODULE_PARM_DESC(first_id_byte, "The first byte returned by NAND Flash 'read ID' command (manufacturer ID)");
MODULE_PARM_DESC(second_id_byte, "The second byte returned by NAND Flash 'read ID' command (chip ID)");
@@ -162,6 +164,7 @@ MODULE_PARM_DESC(overridesize, "Specifies the NAND Flash size overriding the I
"The size is specified in erase blocks and as the exponent of a power of two"
" e.g. 5 means a size of 32 erase blocks");
MODULE_PARM_DESC(cache_file, "File to use to cache nand pages instead of memory");
+MODULE_PARM_DESC(bbt, "0 OOB, 1 BBT with marker in OOB, 2 BBT with marker in data area");
/* The largest possible page size */
#define NS_LARGEST_PAGE_SIZE 4096
@@ -2264,6 +2267,18 @@ static int __init ns_init_module(void)
/* and 'badblocks' parameters to work */
chip->options |= NAND_SKIP_BBTSCAN;
+ switch (bbt) {
+ case 2:
+ chip->options |= NAND_USE_FLASH_BBT_NO_OOB;
+ case 1:
+ chip->options |= NAND_USE_FLASH_BBT;
+ case 0:
+ break;
+ default:
+ NS_ERR("bbt has to be 0..2\n");
+ retval = -EINVAL;
+ goto error;
+ }
/*
* Perform minimum nandsim structure initialization to handle
* the initial ID read command correctly
@@ -2321,10 +2336,10 @@ static int __init ns_init_module(void)
if ((retval = init_nandsim(nsmtd)) != 0)
goto err_exit;
- if ((retval = parse_badblocks(nand, nsmtd)) != 0)
+ if ((retval = nand_default_bbt(nsmtd)) != 0)
goto err_exit;
- if ((retval = nand_default_bbt(nsmtd)) != 0)
+ if ((retval = parse_badblocks(nand, nsmtd)) != 0)
goto err_exit;
/* Register NAND partitions */
diff --git a/drivers/mtd/nand/ndfc.c b/drivers/mtd/nand/ndfc.c
index 510554e6c11..c9ae0a5023b 100644
--- a/drivers/mtd/nand/ndfc.c
+++ b/drivers/mtd/nand/ndfc.c
@@ -229,7 +229,7 @@ static int __devinit ndfc_probe(struct platform_device *ofdev,
const struct of_device_id *match)
{
struct ndfc_controller *ndfc = &ndfc_ctrl;
- const u32 *reg;
+ const __be32 *reg;
u32 ccr;
int err, len;
@@ -244,7 +244,7 @@ static int __devinit ndfc_probe(struct platform_device *ofdev,
dev_err(&ofdev->dev, "unable read reg property (%d)\n", len);
return -ENOENT;
}
- ndfc->chip_select = reg[0];
+ ndfc->chip_select = be32_to_cpu(reg[0]);
ndfc->ndfcbase = of_iomap(ofdev->dev.of_node, 0);
if (!ndfc->ndfcbase) {
@@ -257,7 +257,7 @@ static int __devinit ndfc_probe(struct platform_device *ofdev,
/* It is ok if ccr does not exist - just default to 0 */
reg = of_get_property(ofdev->dev.of_node, "ccr", NULL);
if (reg)
- ccr |= *reg;
+ ccr |= be32_to_cpup(reg);
out_be32(ndfc->ndfcbase + NDFC_CCR, ccr);
@@ -265,7 +265,7 @@ static int __devinit ndfc_probe(struct platform_device *ofdev,
reg = of_get_property(ofdev->dev.of_node, "bank-settings", NULL);
if (reg) {
int offset = NDFC_BCFG0 + (ndfc->chip_select << 2);
- out_be32(ndfc->ndfcbase + offset, *reg);
+ out_be32(ndfc->ndfcbase + offset, be32_to_cpup(reg));
}
err = ndfc_chip_init(ndfc, ofdev->dev.of_node);
diff --git a/drivers/mtd/nand/omap2.c b/drivers/mtd/nand/omap2.c
index 513e0a76a4a..cd41c58b5bb 100644
--- a/drivers/mtd/nand/omap2.c
+++ b/drivers/mtd/nand/omap2.c
@@ -111,11 +111,11 @@ static int use_dma = 1;
module_param(use_dma, bool, 0);
MODULE_PARM_DESC(use_dma, "enable/disable use of DMA");
#else
-const int use_dma;
+static const int use_dma;
#endif
#else
const int use_prefetch;
-const int use_dma;
+static const int use_dma;
#endif
struct omap_nand_info {
diff --git a/drivers/mtd/nand/pxa3xx_nand.c b/drivers/mtd/nand/pxa3xx_nand.c
index 4d01cda6884..17f8518cc5e 100644
--- a/drivers/mtd/nand/pxa3xx_nand.c
+++ b/drivers/mtd/nand/pxa3xx_nand.c
@@ -117,7 +117,7 @@ struct pxa3xx_nand_info {
struct nand_chip nand_chip;
struct platform_device *pdev;
- const struct pxa3xx_nand_flash *flash_info;
+ struct pxa3xx_nand_cmdset *cmdset;
struct clk *clk;
void __iomem *mmio_base;
@@ -131,6 +131,7 @@ struct pxa3xx_nand_info {
int drcmr_cmd;
unsigned char *data_buff;
+ unsigned char *oob_buff;
dma_addr_t data_buff_phys;
size_t data_buff_size;
int data_dma_ch;
@@ -149,7 +150,8 @@ struct pxa3xx_nand_info {
int use_ecc; /* use HW ECC ? */
int use_dma; /* use DMA ? */
- size_t data_size; /* data size in FIFO */
+ unsigned int page_size; /* page size of attached chip */
+ unsigned int data_size; /* data size in FIFO */
int retcode;
struct completion cmd_complete;
@@ -158,6 +160,10 @@ struct pxa3xx_nand_info {
uint32_t ndcb1;
uint32_t ndcb2;
+ /* timing calcuted from setting */
+ uint32_t ndtr0cs0;
+ uint32_t ndtr1cs0;
+
/* calculated from pxa3xx_nand_flash data */
size_t oob_size;
size_t read_id_bytes;
@@ -174,23 +180,7 @@ MODULE_PARM_DESC(use_dma, "enable DMA for data transfering to/from NAND HW");
* Default NAND flash controller configuration setup by the
* bootloader. This configuration is used only when pdata->keep_config is set
*/
-static struct pxa3xx_nand_timing default_timing;
-static struct pxa3xx_nand_flash default_flash;
-
-static struct pxa3xx_nand_cmdset smallpage_cmdset = {
- .read1 = 0x0000,
- .read2 = 0x0050,
- .program = 0x1080,
- .read_status = 0x0070,
- .read_id = 0x0090,
- .erase = 0xD060,
- .reset = 0x00FF,
- .lock = 0x002A,
- .unlock = 0x2423,
- .lock_status = 0x007A,
-};
-
-static struct pxa3xx_nand_cmdset largepage_cmdset = {
+static struct pxa3xx_nand_cmdset default_cmdset = {
.read1 = 0x3000,
.read2 = 0x0050,
.program = 0x1080,
@@ -203,142 +193,27 @@ static struct pxa3xx_nand_cmdset largepage_cmdset = {
.lock_status = 0x007A,
};
-#ifdef CONFIG_MTD_NAND_PXA3xx_BUILTIN
-static struct pxa3xx_nand_timing samsung512MbX16_timing = {
- .tCH = 10,
- .tCS = 0,
- .tWH = 20,
- .tWP = 40,
- .tRH = 30,
- .tRP = 40,
- .tR = 11123,
- .tWHR = 110,
- .tAR = 10,
-};
-
-static struct pxa3xx_nand_flash samsung512MbX16 = {
- .timing = &samsung512MbX16_timing,
- .cmdset = &smallpage_cmdset,
- .page_per_block = 32,
- .page_size = 512,
- .flash_width = 16,
- .dfc_width = 16,
- .num_blocks = 4096,
- .chip_id = 0x46ec,
-};
-
-static struct pxa3xx_nand_flash samsung2GbX8 = {
- .timing = &samsung512MbX16_timing,
- .cmdset = &smallpage_cmdset,
- .page_per_block = 64,
- .page_size = 2048,
- .flash_width = 8,
- .dfc_width = 8,
- .num_blocks = 2048,
- .chip_id = 0xdaec,
+static struct pxa3xx_nand_timing timing[] = {
+ { 40, 80, 60, 100, 80, 100, 90000, 400, 40, },
+ { 10, 0, 20, 40, 30, 40, 11123, 110, 10, },
+ { 10, 25, 15, 25, 15, 30, 25000, 60, 10, },
+ { 10, 35, 15, 25, 15, 25, 25000, 60, 10, },
};
-static struct pxa3xx_nand_flash samsung32GbX8 = {
- .timing = &samsung512MbX16_timing,
- .cmdset = &smallpage_cmdset,
- .page_per_block = 128,
- .page_size = 4096,
- .flash_width = 8,
- .dfc_width = 8,
- .num_blocks = 8192,
- .chip_id = 0xd7ec,
+static struct pxa3xx_nand_flash builtin_flash_types[] = {
+ { 0, 0, 2048, 8, 8, 0, &default_cmdset, &timing[0] },
+ { 0x46ec, 32, 512, 16, 16, 4096, &default_cmdset, &timing[1] },
+ { 0xdaec, 64, 2048, 8, 8, 2048, &default_cmdset, &timing[1] },
+ { 0xd7ec, 128, 4096, 8, 8, 8192, &default_cmdset, &timing[1] },
+ { 0xa12c, 64, 2048, 8, 8, 1024, &default_cmdset, &timing[2] },
+ { 0xb12c, 64, 2048, 16, 16, 1024, &default_cmdset, &timing[2] },
+ { 0xdc2c, 64, 2048, 8, 8, 4096, &default_cmdset, &timing[2] },
+ { 0xcc2c, 64, 2048, 16, 16, 4096, &default_cmdset, &timing[2] },
+ { 0xba20, 64, 2048, 16, 16, 2048, &default_cmdset, &timing[3] },
};
-static struct pxa3xx_nand_timing micron_timing = {
- .tCH = 10,
- .tCS = 25,
- .tWH = 15,
- .tWP = 25,
- .tRH = 15,
- .tRP = 30,
- .tR = 25000,
- .tWHR = 60,
- .tAR = 10,
-};
-
-static struct pxa3xx_nand_flash micron1GbX8 = {
- .timing = &micron_timing,
- .cmdset = &largepage_cmdset,
- .page_per_block = 64,
- .page_size = 2048,
- .flash_width = 8,
- .dfc_width = 8,
- .num_blocks = 1024,
- .chip_id = 0xa12c,
-};
-
-static struct pxa3xx_nand_flash micron1GbX16 = {
- .timing = &micron_timing,
- .cmdset = &largepage_cmdset,
- .page_per_block = 64,
- .page_size = 2048,
- .flash_width = 16,
- .dfc_width = 16,
- .num_blocks = 1024,
- .chip_id = 0xb12c,
-};
-
-static struct pxa3xx_nand_flash micron4GbX8 = {
- .timing = &micron_timing,
- .cmdset = &largepage_cmdset,
- .page_per_block = 64,
- .page_size = 2048,
- .flash_width = 8,
- .dfc_width = 8,
- .num_blocks = 4096,
- .chip_id = 0xdc2c,
-};
-
-static struct pxa3xx_nand_flash micron4GbX16 = {
- .timing = &micron_timing,
- .cmdset = &largepage_cmdset,
- .page_per_block = 64,
- .page_size = 2048,
- .flash_width = 16,
- .dfc_width = 16,
- .num_blocks = 4096,
- .chip_id = 0xcc2c,
-};
-
-static struct pxa3xx_nand_timing stm2GbX16_timing = {
- .tCH = 10,
- .tCS = 35,
- .tWH = 15,
- .tWP = 25,
- .tRH = 15,
- .tRP = 25,
- .tR = 25000,
- .tWHR = 60,
- .tAR = 10,
-};
-
-static struct pxa3xx_nand_flash stm2GbX16 = {
- .timing = &stm2GbX16_timing,
- .cmdset = &largepage_cmdset,
- .page_per_block = 64,
- .page_size = 2048,
- .flash_width = 16,
- .dfc_width = 16,
- .num_blocks = 2048,
- .chip_id = 0xba20,
-};
-
-static struct pxa3xx_nand_flash *builtin_flash_types[] = {
- &samsung512MbX16,
- &samsung2GbX8,
- &samsung32GbX8,
- &micron1GbX8,
- &micron1GbX16,
- &micron4GbX8,
- &micron4GbX16,
- &stm2GbX16,
-};
-#endif /* CONFIG_MTD_NAND_PXA3xx_BUILTIN */
+/* Define a default flash type setting serve as flash detecting only */
+#define DEFAULT_FLASH_TYPE (&builtin_flash_types[0])
#define NDTR0_tCH(c) (min((c), 7) << 19)
#define NDTR0_tCS(c) (min((c), 7) << 16)
@@ -351,23 +226,9 @@ static struct pxa3xx_nand_flash *builtin_flash_types[] = {
#define NDTR1_tWHR(c) (min((c), 15) << 4)
#define NDTR1_tAR(c) (min((c), 15) << 0)
-#define tCH_NDTR0(r) (((r) >> 19) & 0x7)
-#define tCS_NDTR0(r) (((r) >> 16) & 0x7)
-#define tWH_NDTR0(r) (((r) >> 11) & 0x7)
-#define tWP_NDTR0(r) (((r) >> 8) & 0x7)
-#define tRH_NDTR0(r) (((r) >> 3) & 0x7)
-#define tRP_NDTR0(r) (((r) >> 0) & 0x7)
-
-#define tR_NDTR1(r) (((r) >> 16) & 0xffff)
-#define tWHR_NDTR1(r) (((r) >> 4) & 0xf)
-#define tAR_NDTR1(r) (((r) >> 0) & 0xf)
-
/* convert nano-seconds to nand flash controller clock cycles */
#define ns2cycle(ns, clk) (int)((ns) * (clk / 1000000) / 1000)
-/* convert nand flash controller clock cycles to nano-seconds */
-#define cycle2ns(c, clk) ((((c) + 1) * 1000000 + clk / 500) / (clk / 1000))
-
static void pxa3xx_nand_set_timing(struct pxa3xx_nand_info *info,
const struct pxa3xx_nand_timing *t)
{
@@ -385,6 +246,8 @@ static void pxa3xx_nand_set_timing(struct pxa3xx_nand_info *info,
NDTR1_tWHR(ns2cycle(t->tWHR, nand_clk)) |
NDTR1_tAR(ns2cycle(t->tAR, nand_clk));
+ info->ndtr0cs0 = ndtr0;
+ info->ndtr1cs0 = ndtr1;
nand_writel(info, NDTR0CS0, ndtr0);
nand_writel(info, NDTR1CS0, ndtr1);
}
@@ -408,23 +271,31 @@ static int wait_for_event(struct pxa3xx_nand_info *info, uint32_t event)
return -ETIMEDOUT;
}
-static int prepare_read_prog_cmd(struct pxa3xx_nand_info *info,
- uint16_t cmd, int column, int page_addr)
+static void pxa3xx_set_datasize(struct pxa3xx_nand_info *info)
{
- const struct pxa3xx_nand_flash *f = info->flash_info;
- const struct pxa3xx_nand_cmdset *cmdset = f->cmdset;
+ int oob_enable = info->reg_ndcr & NDCR_SPARE_EN;
- /* calculate data size */
- switch (f->page_size) {
+ info->data_size = info->page_size;
+ if (!oob_enable) {
+ info->oob_size = 0;
+ return;
+ }
+
+ switch (info->page_size) {
case 2048:
- info->data_size = (info->use_ecc) ? 2088 : 2112;
+ info->oob_size = (info->use_ecc) ? 40 : 64;
break;
case 512:
- info->data_size = (info->use_ecc) ? 520 : 528;
+ info->oob_size = (info->use_ecc) ? 8 : 16;
break;
- default:
- return -EINVAL;
}
+}
+
+static int prepare_read_prog_cmd(struct pxa3xx_nand_info *info,
+ uint16_t cmd, int column, int page_addr)
+{
+ const struct pxa3xx_nand_cmdset *cmdset = info->cmdset;
+ pxa3xx_set_datasize(info);
/* generate values for NDCBx registers */
info->ndcb0 = cmd | ((cmd & 0xff00) ? NDCB0_DBC : 0);
@@ -463,12 +334,13 @@ static int prepare_erase_cmd(struct pxa3xx_nand_info *info,
static int prepare_other_cmd(struct pxa3xx_nand_info *info, uint16_t cmd)
{
- const struct pxa3xx_nand_cmdset *cmdset = info->flash_info->cmdset;
+ const struct pxa3xx_nand_cmdset *cmdset = info->cmdset;
info->ndcb0 = cmd | ((cmd & 0xff00) ? NDCB0_DBC : 0);
info->ndcb1 = 0;
info->ndcb2 = 0;
+ info->oob_size = 0;
if (cmd == cmdset->read_id) {
info->ndcb0 |= NDCB0_CMD_TYPE(3);
info->data_size = 8;
@@ -537,6 +409,9 @@ static int handle_data_pio(struct pxa3xx_nand_info *info)
case STATE_PIO_WRITING:
__raw_writesl(info->mmio_base + NDDB, info->data_buff,
DIV_ROUND_UP(info->data_size, 4));
+ if (info->oob_size > 0)
+ __raw_writesl(info->mmio_base + NDDB, info->oob_buff,
+ DIV_ROUND_UP(info->oob_size, 4));
enable_int(info, NDSR_CS0_BBD | NDSR_CS0_CMDD);
@@ -549,6 +424,9 @@ static int handle_data_pio(struct pxa3xx_nand_info *info)
case STATE_PIO_READING:
__raw_readsl(info->mmio_base + NDDB, info->data_buff,
DIV_ROUND_UP(info->data_size, 4));
+ if (info->oob_size > 0)
+ __raw_readsl(info->mmio_base + NDDB, info->oob_buff,
+ DIV_ROUND_UP(info->oob_size, 4));
break;
default:
printk(KERN_ERR "%s: invalid state %d\n", __func__,
@@ -563,7 +441,7 @@ static int handle_data_pio(struct pxa3xx_nand_info *info)
static void start_data_dma(struct pxa3xx_nand_info *info, int dir_out)
{
struct pxa_dma_desc *desc = info->data_desc;
- int dma_len = ALIGN(info->data_size, 32);
+ int dma_len = ALIGN(info->data_size + info->oob_size, 32);
desc->ddadr = DDADR_STOP;
desc->dcmd = DCMD_ENDIRQEN | DCMD_WIDTH4 | DCMD_BURST32 | dma_len;
@@ -700,8 +578,7 @@ static void pxa3xx_nand_cmdfunc(struct mtd_info *mtd, unsigned command,
int column, int page_addr)
{
struct pxa3xx_nand_info *info = mtd->priv;
- const struct pxa3xx_nand_flash *flash_info = info->flash_info;
- const struct pxa3xx_nand_cmdset *cmdset = flash_info->cmdset;
+ const struct pxa3xx_nand_cmdset *cmdset = info->cmdset;
int ret;
info->use_dma = (use_dma) ? 1 : 0;
@@ -925,8 +802,7 @@ static int pxa3xx_nand_ecc_correct(struct mtd_info *mtd,
static int __readid(struct pxa3xx_nand_info *info, uint32_t *id)
{
- const struct pxa3xx_nand_flash *f = info->flash_info;
- const struct pxa3xx_nand_cmdset *cmdset = f->cmdset;
+ const struct pxa3xx_nand_cmdset *cmdset = info->cmdset;
uint32_t ndcr;
uint8_t id_buff[8];
@@ -968,7 +844,9 @@ static int pxa3xx_nand_config_flash(struct pxa3xx_nand_info *info,
return -EINVAL;
/* calculate flash information */
- info->oob_size = (f->page_size == 2048) ? 64 : 16;
+ info->cmdset = f->cmdset;
+ info->page_size = f->page_size;
+ info->oob_buff = info->data_buff + f->page_size;
info->read_id_bytes = (f->page_size == 2048) ? 4 : 2;
/* calculate addressing information */
@@ -992,49 +870,20 @@ static int pxa3xx_nand_config_flash(struct pxa3xx_nand_info *info,
info->reg_ndcr = ndcr;
pxa3xx_nand_set_timing(info, f->timing);
- info->flash_info = f;
return 0;
}
-static void pxa3xx_nand_detect_timing(struct pxa3xx_nand_info *info,
- struct pxa3xx_nand_timing *t)
-{
- unsigned long nand_clk = clk_get_rate(info->clk);
- uint32_t ndtr0 = nand_readl(info, NDTR0CS0);
- uint32_t ndtr1 = nand_readl(info, NDTR1CS0);
-
- t->tCH = cycle2ns(tCH_NDTR0(ndtr0), nand_clk);
- t->tCS = cycle2ns(tCS_NDTR0(ndtr0), nand_clk);
- t->tWH = cycle2ns(tWH_NDTR0(ndtr0), nand_clk);
- t->tWP = cycle2ns(tWP_NDTR0(ndtr0), nand_clk);
- t->tRH = cycle2ns(tRH_NDTR0(ndtr0), nand_clk);
- t->tRP = cycle2ns(tRP_NDTR0(ndtr0), nand_clk);
-
- t->tR = cycle2ns(tR_NDTR1(ndtr1), nand_clk);
- t->tWHR = cycle2ns(tWHR_NDTR1(ndtr1), nand_clk);
- t->tAR = cycle2ns(tAR_NDTR1(ndtr1), nand_clk);
-}
-
static int pxa3xx_nand_detect_config(struct pxa3xx_nand_info *info)
{
uint32_t ndcr = nand_readl(info, NDCR);
struct nand_flash_dev *type = NULL;
- uint32_t id = -1;
+ uint32_t id = -1, page_per_block, num_blocks;
int i;
- default_flash.page_per_block = ndcr & NDCR_PG_PER_BLK ? 64 : 32;
- default_flash.page_size = ndcr & NDCR_PAGE_SZ ? 2048 : 512;
- default_flash.flash_width = ndcr & NDCR_DWIDTH_M ? 16 : 8;
- default_flash.dfc_width = ndcr & NDCR_DWIDTH_C ? 16 : 8;
-
- if (default_flash.page_size == 2048)
- default_flash.cmdset = &largepage_cmdset;
- else
- default_flash.cmdset = &smallpage_cmdset;
-
+ page_per_block = ndcr & NDCR_PG_PER_BLK ? 64 : 32;
+ info->page_size = ndcr & NDCR_PAGE_SZ ? 2048 : 512;
/* set info fields needed to __readid */
- info->flash_info = &default_flash;
- info->read_id_bytes = (default_flash.page_size == 2048) ? 4 : 2;
+ info->read_id_bytes = (info->page_size == 2048) ? 4 : 2;
info->reg_ndcr = ndcr;
if (__readid(info, &id))
@@ -1053,21 +902,20 @@ static int pxa3xx_nand_detect_config(struct pxa3xx_nand_info *info)
return -ENODEV;
/* fill the missing flash information */
- i = __ffs(default_flash.page_per_block * default_flash.page_size);
- default_flash.num_blocks = type->chipsize << (20 - i);
-
- info->oob_size = (default_flash.page_size == 2048) ? 64 : 16;
+ i = __ffs(page_per_block * info->page_size);
+ num_blocks = type->chipsize << (20 - i);
/* calculate addressing information */
- info->col_addr_cycles = (default_flash.page_size == 2048) ? 2 : 1;
+ info->col_addr_cycles = (info->page_size == 2048) ? 2 : 1;
- if (default_flash.num_blocks * default_flash.page_per_block > 65536)
+ if (num_blocks * page_per_block > 65536)
info->row_addr_cycles = 3;
else
info->row_addr_cycles = 2;
- pxa3xx_nand_detect_timing(info, &default_timing);
- default_flash.timing = &default_timing;
+ info->ndtr0cs0 = nand_readl(info, NDTR0CS0);
+ info->ndtr1cs0 = nand_readl(info, NDTR1CS0);
+ info->cmdset = &default_cmdset;
return 0;
}
@@ -1083,38 +931,29 @@ static int pxa3xx_nand_detect_flash(struct pxa3xx_nand_info *info,
if (pxa3xx_nand_detect_config(info) == 0)
return 0;
- for (i = 0; i<pdata->num_flash; ++i) {
- f = pdata->flash + i;
-
- if (pxa3xx_nand_config_flash(info, f))
- continue;
-
- if (__readid(info, &id))
- continue;
-
- if (id == f->chip_id)
- return 0;
- }
-
-#ifdef CONFIG_MTD_NAND_PXA3xx_BUILTIN
- for (i = 0; i < ARRAY_SIZE(builtin_flash_types); i++) {
-
- f = builtin_flash_types[i];
-
- if (pxa3xx_nand_config_flash(info, f))
- continue;
-
- if (__readid(info, &id))
- continue;
-
- if (id == f->chip_id)
+ /* we use default timing to detect id */
+ f = DEFAULT_FLASH_TYPE;
+ pxa3xx_nand_config_flash(info, f);
+ if (__readid(info, &id))
+ goto fail_detect;
+
+ for (i=0; i<ARRAY_SIZE(builtin_flash_types) + pdata->num_flash - 1; i++) {
+ /* we first choose the flash definition from platfrom */
+ if (i < pdata->num_flash)
+ f = pdata->flash + i;
+ else
+ f = &builtin_flash_types[i - pdata->num_flash + 1];
+ if (f->chip_id == id) {
+ dev_info(&info->pdev->dev, "detect chip id: 0x%x\n", id);
+ pxa3xx_nand_config_flash(info, f);
return 0;
+ }
}
-#endif
dev_warn(&info->pdev->dev,
"failed to detect configured nand flash; found %04x instead of\n",
id);
+fail_detect:
return -ENODEV;
}
@@ -1177,10 +1016,9 @@ static struct nand_ecclayout hw_largepage_ecclayout = {
static void pxa3xx_nand_init_mtd(struct mtd_info *mtd,
struct pxa3xx_nand_info *info)
{
- const struct pxa3xx_nand_flash *f = info->flash_info;
struct nand_chip *this = &info->nand_chip;
- this->options = (f->flash_width == 16) ? NAND_BUSWIDTH_16: 0;
+ this->options = (info->reg_ndcr & NDCR_DWIDTH_C) ? NAND_BUSWIDTH_16: 0;
this->waitfunc = pxa3xx_nand_waitfunc;
this->select_chip = pxa3xx_nand_select_chip;
@@ -1196,9 +1034,9 @@ static void pxa3xx_nand_init_mtd(struct mtd_info *mtd,
this->ecc.hwctl = pxa3xx_nand_ecc_hwctl;
this->ecc.calculate = pxa3xx_nand_ecc_calculate;
this->ecc.correct = pxa3xx_nand_ecc_correct;
- this->ecc.size = f->page_size;
+ this->ecc.size = info->page_size;
- if (f->page_size == 2048)
+ if (info->page_size == 2048)
this->ecc.layout = &hw_largepage_ecclayout;
else
this->ecc.layout = &hw_smallpage_ecclayout;
@@ -1411,9 +1249,11 @@ static int pxa3xx_nand_resume(struct platform_device *pdev)
struct mtd_info *mtd = (struct mtd_info *)platform_get_drvdata(pdev);
struct pxa3xx_nand_info *info = mtd->priv;
+ nand_writel(info, NDTR0CS0, info->ndtr0cs0);
+ nand_writel(info, NDTR1CS0, info->ndtr1cs0);
clk_enable(info->clk);
- return pxa3xx_nand_config_flash(info, info->flash_info);
+ return 0;
}
#else
#define pxa3xx_nand_suspend NULL
diff --git a/drivers/mtd/nand/r852.c b/drivers/mtd/nand/r852.c
index 5169ca6a66b..d9d7efbc77c 100644
--- a/drivers/mtd/nand/r852.c
+++ b/drivers/mtd/nand/r852.c
@@ -757,11 +757,6 @@ static irqreturn_t r852_irq(int irq, void *data)
spin_lock_irqsave(&dev->irqlock, flags);
- /* We can recieve shared interrupt while pci is suspended
- in that case reads will return 0xFFFFFFFF.... */
- if (dev->insuspend)
- goto out;
-
/* handle card detection interrupts first */
card_status = r852_read_reg(dev, R852_CARD_IRQ_STA);
r852_write_reg(dev, R852_CARD_IRQ_STA, card_status);
@@ -1035,7 +1030,6 @@ void r852_shutdown(struct pci_dev *pci_dev)
int r852_suspend(struct device *device)
{
struct r852_device *dev = pci_get_drvdata(to_pci_dev(device));
- unsigned long flags;
if (dev->ctlreg & R852_CTL_CARDENABLE)
return -EBUSY;
@@ -1047,43 +1041,22 @@ int r852_suspend(struct device *device)
r852_disable_irqs(dev);
r852_engine_disable(dev);
- spin_lock_irqsave(&dev->irqlock, flags);
- dev->insuspend = 1;
- spin_unlock_irqrestore(&dev->irqlock, flags);
-
- /* At that point, even if interrupt handler is running, it will quit */
- /* So wait for this to happen explictly */
- synchronize_irq(dev->irq);
-
/* If card was pulled off just during the suspend, which is very
unlikely, we will remove it on resume, it too late now
anyway... */
dev->card_unstable = 0;
-
- pci_save_state(to_pci_dev(device));
- return pci_prepare_to_sleep(to_pci_dev(device));
+ return 0;
}
int r852_resume(struct device *device)
{
struct r852_device *dev = pci_get_drvdata(to_pci_dev(device));
- unsigned long flags;
-
- /* Turn on the hardware */
- pci_back_from_sleep(to_pci_dev(device));
- pci_restore_state(to_pci_dev(device));
r852_disable_irqs(dev);
r852_card_update_present(dev);
r852_engine_disable(dev);
- /* Now its safe for IRQ to run */
- spin_lock_irqsave(&dev->irqlock, flags);
- dev->insuspend = 0;
- spin_unlock_irqrestore(&dev->irqlock, flags);
-
-
/* If card status changed, just do the work */
if (dev->card_detected != dev->card_registred) {
dbg("card was %s during low power state",
@@ -1121,7 +1094,6 @@ MODULE_DEVICE_TABLE(pci, r852_pci_id_tbl);
SIMPLE_DEV_PM_OPS(r852_pm_ops, r852_suspend, r852_resume);
-
static struct pci_driver r852_pci_driver = {
.name = DRV_NAME,
.id_table = r852_pci_id_tbl,
diff --git a/drivers/mtd/nand/r852.h b/drivers/mtd/nand/r852.h
index 8096cc280c7..e6a21d9d22c 100644
--- a/drivers/mtd/nand/r852.h
+++ b/drivers/mtd/nand/r852.h
@@ -140,8 +140,6 @@ struct r852_device {
/* interrupt handling */
spinlock_t irqlock; /* IRQ protecting lock */
int irq; /* irq num */
- int insuspend; /* device is suspended */
-
/* misc */
void *tmp_buffer; /* temporary buffer */
uint8_t ctlreg; /* cached contents of control reg */
diff --git a/drivers/mtd/ofpart.c b/drivers/mtd/ofpart.c
index 7bd171eefd2..a996718fa6b 100644
--- a/drivers/mtd/ofpart.c
+++ b/drivers/mtd/ofpart.c
@@ -44,7 +44,7 @@ int __devinit of_mtd_parse_partitions(struct device *dev,
pp = NULL;
i = 0;
while ((pp = of_get_next_child(node, pp))) {
- const u32 *reg;
+ const __be32 *reg;
int len;
reg = of_get_property(pp, "reg", &len);
diff --git a/drivers/mtd/onenand/Kconfig b/drivers/mtd/onenand/Kconfig
index 3f32289fdbb..4dbd0f58eeb 100644
--- a/drivers/mtd/onenand/Kconfig
+++ b/drivers/mtd/onenand/Kconfig
@@ -32,10 +32,11 @@ config MTD_ONENAND_OMAP2
config MTD_ONENAND_SAMSUNG
tristate "OneNAND on Samsung SOC controller support"
- depends on ARCH_S3C64XX || ARCH_S5PC100 || ARCH_S5PV210
+ depends on ARCH_S3C64XX || ARCH_S5PC100 || ARCH_S5PV210 || ARCH_S5PV310
help
- Support for a OneNAND flash device connected to an Samsung SOC
- S3C64XX/S5PC1XX controller.
+ Support for a OneNAND flash device connected to an Samsung SOC.
+ S3C64XX/S5PC100 use command mapping method.
+ S5PC110/S5PC210 use generic OneNAND method.
config MTD_ONENAND_OTP
bool "OneNAND OTP Support"
diff --git a/drivers/mtd/onenand/onenand_base.c b/drivers/mtd/onenand/onenand_base.c
index a2bb520286f..6b3a875647c 100644
--- a/drivers/mtd/onenand/onenand_base.c
+++ b/drivers/mtd/onenand/onenand_base.c
@@ -3365,18 +3365,19 @@ static int onenand_lock_user_prot_reg(struct mtd_info *mtd, loff_t from,
static void onenand_check_features(struct mtd_info *mtd)
{
struct onenand_chip *this = mtd->priv;
- unsigned int density, process;
+ unsigned int density, process, numbufs;
/* Lock scheme depends on density and process */
density = onenand_get_density(this->device_id);
process = this->version_id >> ONENAND_VERSION_PROCESS_SHIFT;
+ numbufs = this->read_word(this->base + ONENAND_REG_NUM_BUFFERS) >> 8;
/* Lock scheme */
switch (density) {
case ONENAND_DEVICE_DENSITY_4Gb:
if (ONENAND_IS_DDP(this))
this->options |= ONENAND_HAS_2PLANE;
- else
+ else if (numbufs == 1)
this->options |= ONENAND_HAS_4KB_PAGE;
case ONENAND_DEVICE_DENSITY_2Gb:
@@ -4027,7 +4028,7 @@ int onenand_scan(struct mtd_info *mtd, int maxchips)
mtd->ecclayout = this->ecclayout;
/* Fill in remaining MTD driver data */
- mtd->type = MTD_NANDFLASH;
+ mtd->type = ONENAND_IS_MLC(this) ? MTD_MLCNANDFLASH : MTD_NANDFLASH;
mtd->flags = MTD_CAP_NANDFLASH;
mtd->erase = onenand_erase;
mtd->point = NULL;
diff --git a/drivers/mtd/onenand/samsung.c b/drivers/mtd/onenand/samsung.c
index a460f1b748c..0de7a05e6de 100644
--- a/drivers/mtd/onenand/samsung.c
+++ b/drivers/mtd/onenand/samsung.c
@@ -22,6 +22,7 @@
#include <linux/mtd/onenand.h>
#include <linux/mtd/partitions.h>
#include <linux/dma-mapping.h>
+#include <linux/interrupt.h>
#include <asm/mach/flash.h>
#include <plat/regs-onenand.h>
@@ -58,7 +59,7 @@ enum soc_type {
#define MAP_11 (0x3)
#define S3C64XX_CMD_MAP_SHIFT 24
-#define S5PC1XX_CMD_MAP_SHIFT 26
+#define S5PC100_CMD_MAP_SHIFT 26
#define S3C6400_FBA_SHIFT 10
#define S3C6400_FPA_SHIFT 4
@@ -81,6 +82,17 @@ enum soc_type {
#define S5PC110_DMA_TRANS_CMD 0x418
#define S5PC110_DMA_TRANS_STATUS 0x41C
#define S5PC110_DMA_TRANS_DIR 0x420
+#define S5PC110_INTC_DMA_CLR 0x1004
+#define S5PC110_INTC_ONENAND_CLR 0x1008
+#define S5PC110_INTC_DMA_MASK 0x1024
+#define S5PC110_INTC_ONENAND_MASK 0x1028
+#define S5PC110_INTC_DMA_PEND 0x1044
+#define S5PC110_INTC_ONENAND_PEND 0x1048
+#define S5PC110_INTC_DMA_STATUS 0x1064
+#define S5PC110_INTC_ONENAND_STATUS 0x1068
+
+#define S5PC110_INTC_DMA_TD (1 << 24)
+#define S5PC110_INTC_DMA_TE (1 << 16)
#define S5PC110_DMA_CFG_SINGLE (0x0 << 16)
#define S5PC110_DMA_CFG_4BURST (0x2 << 16)
@@ -134,6 +146,7 @@ struct s3c_onenand {
void __iomem *dma_addr;
struct resource *dma_res;
unsigned long phys_base;
+ struct completion complete;
#ifdef CONFIG_MTD_PARTITIONS
struct mtd_partition *parts;
#endif
@@ -191,7 +204,7 @@ static unsigned int s3c64xx_cmd_map(unsigned type, unsigned val)
static unsigned int s5pc1xx_cmd_map(unsigned type, unsigned val)
{
- return (type << S5PC1XX_CMD_MAP_SHIFT) | val;
+ return (type << S5PC100_CMD_MAP_SHIFT) | val;
}
static unsigned int s3c6400_mem_addr(int fba, int fpa, int fsa)
@@ -531,10 +544,13 @@ static int onenand_write_bufferram(struct mtd_info *mtd, int area,
return 0;
}
-static int s5pc110_dma_ops(void *dst, void *src, size_t count, int direction)
+static int (*s5pc110_dma_ops)(void *dst, void *src, size_t count, int direction);
+
+static int s5pc110_dma_poll(void *dst, void *src, size_t count, int direction)
{
void __iomem *base = onenand->dma_addr;
int status;
+ unsigned long timeout;
writel(src, base + S5PC110_DMA_SRC_ADDR);
writel(dst, base + S5PC110_DMA_DST_ADDR);
@@ -552,6 +568,13 @@ static int s5pc110_dma_ops(void *dst, void *src, size_t count, int direction)
writel(S5PC110_DMA_TRANS_CMD_TR, base + S5PC110_DMA_TRANS_CMD);
+ /*
+ * There's no exact timeout values at Spec.
+ * In real case it takes under 1 msec.
+ * So 20 msecs are enough.
+ */
+ timeout = jiffies + msecs_to_jiffies(20);
+
do {
status = readl(base + S5PC110_DMA_TRANS_STATUS);
if (status & S5PC110_DMA_TRANS_STATUS_TE) {
@@ -559,13 +582,68 @@ static int s5pc110_dma_ops(void *dst, void *src, size_t count, int direction)
base + S5PC110_DMA_TRANS_CMD);
return -EIO;
}
- } while (!(status & S5PC110_DMA_TRANS_STATUS_TD));
+ } while (!(status & S5PC110_DMA_TRANS_STATUS_TD) &&
+ time_before(jiffies, timeout));
writel(S5PC110_DMA_TRANS_CMD_TDC, base + S5PC110_DMA_TRANS_CMD);
return 0;
}
+static irqreturn_t s5pc110_onenand_irq(int irq, void *data)
+{
+ void __iomem *base = onenand->dma_addr;
+ int status, cmd = 0;
+
+ status = readl(base + S5PC110_INTC_DMA_STATUS);
+
+ if (likely(status & S5PC110_INTC_DMA_TD))
+ cmd = S5PC110_DMA_TRANS_CMD_TDC;
+
+ if (unlikely(status & S5PC110_INTC_DMA_TE))
+ cmd = S5PC110_DMA_TRANS_CMD_TEC;
+
+ writel(cmd, base + S5PC110_DMA_TRANS_CMD);
+ writel(status, base + S5PC110_INTC_DMA_CLR);
+
+ if (!onenand->complete.done)
+ complete(&onenand->complete);
+
+ return IRQ_HANDLED;
+}
+
+static int s5pc110_dma_irq(void *dst, void *src, size_t count, int direction)
+{
+ void __iomem *base = onenand->dma_addr;
+ int status;
+
+ status = readl(base + S5PC110_INTC_DMA_MASK);
+ if (status) {
+ status &= ~(S5PC110_INTC_DMA_TD | S5PC110_INTC_DMA_TE);
+ writel(status, base + S5PC110_INTC_DMA_MASK);
+ }
+
+ writel(src, base + S5PC110_DMA_SRC_ADDR);
+ writel(dst, base + S5PC110_DMA_DST_ADDR);
+
+ if (direction == S5PC110_DMA_DIR_READ) {
+ writel(S5PC110_DMA_SRC_CFG_READ, base + S5PC110_DMA_SRC_CFG);
+ writel(S5PC110_DMA_DST_CFG_READ, base + S5PC110_DMA_DST_CFG);
+ } else {
+ writel(S5PC110_DMA_SRC_CFG_WRITE, base + S5PC110_DMA_SRC_CFG);
+ writel(S5PC110_DMA_DST_CFG_WRITE, base + S5PC110_DMA_DST_CFG);
+ }
+
+ writel(count, base + S5PC110_DMA_TRANS_SIZE);
+ writel(direction, base + S5PC110_DMA_TRANS_DIR);
+
+ writel(S5PC110_DMA_TRANS_CMD_TR, base + S5PC110_DMA_TRANS_CMD);
+
+ wait_for_completion_timeout(&onenand->complete, msecs_to_jiffies(20));
+
+ return 0;
+}
+
static int s5pc110_read_bufferram(struct mtd_info *mtd, int area,
unsigned char *buffer, int offset, size_t count)
{
@@ -573,7 +651,8 @@ static int s5pc110_read_bufferram(struct mtd_info *mtd, int area,
void __iomem *p;
void *buf = (void *) buffer;
dma_addr_t dma_src, dma_dst;
- int err;
+ int err, page_dma = 0;
+ struct device *dev = &onenand->pdev->dev;
p = this->base + area;
if (ONENAND_CURRENT_BUFFERRAM(this)) {
@@ -597,21 +676,27 @@ static int s5pc110_read_bufferram(struct mtd_info *mtd, int area,
page = vmalloc_to_page(buf);
if (!page)
goto normal;
- buf = page_address(page) + ((size_t) buf & ~PAGE_MASK);
- }
- /* DMA routine */
- dma_src = onenand->phys_base + (p - this->base);
- dma_dst = dma_map_single(&onenand->pdev->dev,
- buf, count, DMA_FROM_DEVICE);
- if (dma_mapping_error(&onenand->pdev->dev, dma_dst)) {
- dev_err(&onenand->pdev->dev,
- "Couldn't map a %d byte buffer for DMA\n", count);
+ page_dma = 1;
+ /* DMA routine */
+ dma_src = onenand->phys_base + (p - this->base);
+ dma_dst = dma_map_page(dev, page, 0, count, DMA_FROM_DEVICE);
+ } else {
+ /* DMA routine */
+ dma_src = onenand->phys_base + (p - this->base);
+ dma_dst = dma_map_single(dev, buf, count, DMA_FROM_DEVICE);
+ }
+ if (dma_mapping_error(dev, dma_dst)) {
+ dev_err(dev, "Couldn't map a %d byte buffer for DMA\n", count);
goto normal;
}
err = s5pc110_dma_ops((void *) dma_dst, (void *) dma_src,
count, S5PC110_DMA_DIR_READ);
- dma_unmap_single(&onenand->pdev->dev, dma_dst, count, DMA_FROM_DEVICE);
+
+ if (page_dma)
+ dma_unmap_page(dev, dma_dst, count, DMA_FROM_DEVICE);
+ else
+ dma_unmap_single(dev, dma_dst, count, DMA_FROM_DEVICE);
if (!err)
return 0;
@@ -759,7 +844,6 @@ static void s3c_onenand_setup(struct mtd_info *mtd)
onenand->cmd_map = s5pc1xx_cmd_map;
} else if (onenand->type == TYPE_S5PC110) {
/* Use generic onenand functions */
- onenand->cmd_map = s5pc1xx_cmd_map;
this->read_bufferram = s5pc110_read_bufferram;
this->chip_probe = s5pc110_chip_probe;
return;
@@ -904,6 +988,20 @@ static int s3c_onenand_probe(struct platform_device *pdev)
}
onenand->phys_base = onenand->base_res->start;
+
+ s5pc110_dma_ops = s5pc110_dma_poll;
+ /* Interrupt support */
+ r = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+ if (r) {
+ init_completion(&onenand->complete);
+ s5pc110_dma_ops = s5pc110_dma_irq;
+ err = request_irq(r->start, s5pc110_onenand_irq,
+ IRQF_SHARED, "onenand", &onenand);
+ if (err) {
+ dev_err(&pdev->dev, "failed to get irq\n");
+ goto scan_failed;
+ }
+ }
}
if (onenand_scan(mtd, 1)) {
@@ -1000,7 +1098,7 @@ static int s3c_pm_ops_suspend(struct device *dev)
struct onenand_chip *this = mtd->priv;
this->wait(mtd, FL_PM_SUSPENDED);
- return mtd->suspend(mtd);
+ return 0;
}
static int s3c_pm_ops_resume(struct device *dev)
@@ -1009,7 +1107,6 @@ static int s3c_pm_ops_resume(struct device *dev)
struct mtd_info *mtd = platform_get_drvdata(pdev);
struct onenand_chip *this = mtd->priv;
- mtd->resume(mtd);
this->unlock_all(mtd);
return 0;
}
diff --git a/drivers/mtd/sm_ftl.h b/drivers/mtd/sm_ftl.h
index e30e48e7f63..43bb7300785 100644
--- a/drivers/mtd/sm_ftl.h
+++ b/drivers/mtd/sm_ftl.h
@@ -20,7 +20,7 @@
struct ftl_zone {
- int initialized;
+ bool initialized;
int16_t *lba_to_phys_table; /* LBA to physical table */
struct kfifo free_sectors; /* queue of free sectors */
};
@@ -37,8 +37,8 @@ struct sm_ftl {
int zone_count; /* number of zones */
int max_lba; /* maximum lba in a zone */
int smallpagenand; /* 256 bytes/page nand */
- int readonly; /* is FS readonly */
- int unstable;
+ bool readonly; /* is FS readonly */
+ bool unstable;
int cis_block; /* CIS block location */
int cis_boffset; /* CIS offset in the block */
int cis_page_offset; /* CIS offset in the page */
@@ -49,7 +49,7 @@ struct sm_ftl {
int cache_zone; /* zone of cached block */
unsigned char *cache_data; /* cached block data */
long unsigned int cache_data_invalid_bitmap;
- int cache_clean;
+ bool cache_clean;
struct work_struct flush_work;
struct timer_list timer;
diff --git a/drivers/oprofile/buffer_sync.c b/drivers/oprofile/buffer_sync.c
index b7e755f4178..a3984f4ef19 100644
--- a/drivers/oprofile/buffer_sync.c
+++ b/drivers/oprofile/buffer_sync.c
@@ -190,7 +190,7 @@ void sync_stop(void)
profile_event_unregister(PROFILE_TASK_EXIT, &task_exit_nb);
task_handoff_unregister(&task_free_nb);
mutex_unlock(&buffer_mutex);
- flush_scheduled_work();
+ flush_cpu_work();
/* make sure we don't leak task structs */
process_task_mortuary();
diff --git a/drivers/oprofile/cpu_buffer.c b/drivers/oprofile/cpu_buffer.c
index f179ac2ea80..59f55441e07 100644
--- a/drivers/oprofile/cpu_buffer.c
+++ b/drivers/oprofile/cpu_buffer.c
@@ -111,14 +111,18 @@ void start_cpu_work(void)
void end_cpu_work(void)
{
- int i;
-
work_enabled = 0;
+}
+
+void flush_cpu_work(void)
+{
+ int i;
for_each_online_cpu(i) {
struct oprofile_cpu_buffer *b = &per_cpu(op_cpu_buffer, i);
- cancel_delayed_work(&b->work);
+ /* these works are per-cpu, no need for flush_sync */
+ flush_delayed_work(&b->work);
}
}
diff --git a/drivers/oprofile/cpu_buffer.h b/drivers/oprofile/cpu_buffer.h
index 68ea16ab645..e1d097e250a 100644
--- a/drivers/oprofile/cpu_buffer.h
+++ b/drivers/oprofile/cpu_buffer.h
@@ -25,6 +25,7 @@ void free_cpu_buffers(void);
void start_cpu_work(void);
void end_cpu_work(void);
+void flush_cpu_work(void);
/* CPU buffer is composed of such entries (which are
* also used for context switch notes)
diff --git a/drivers/oprofile/timer_int.c b/drivers/oprofile/timer_int.c
index dc0ae4d14df..010725117db 100644
--- a/drivers/oprofile/timer_int.c
+++ b/drivers/oprofile/timer_int.c
@@ -21,6 +21,7 @@
#include "oprof.h"
static DEFINE_PER_CPU(struct hrtimer, oprofile_hrtimer);
+static int ctr_running;
static enum hrtimer_restart oprofile_hrtimer_notify(struct hrtimer *hrtimer)
{
@@ -33,6 +34,9 @@ static void __oprofile_hrtimer_start(void *unused)
{
struct hrtimer *hrtimer = &__get_cpu_var(oprofile_hrtimer);
+ if (!ctr_running)
+ return;
+
hrtimer_init(hrtimer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
hrtimer->function = oprofile_hrtimer_notify;
@@ -42,7 +46,10 @@ static void __oprofile_hrtimer_start(void *unused)
static int oprofile_hrtimer_start(void)
{
+ get_online_cpus();
+ ctr_running = 1;
on_each_cpu(__oprofile_hrtimer_start, NULL, 1);
+ put_online_cpus();
return 0;
}
@@ -50,6 +57,9 @@ static void __oprofile_hrtimer_stop(int cpu)
{
struct hrtimer *hrtimer = &per_cpu(oprofile_hrtimer, cpu);
+ if (!ctr_running)
+ return;
+
hrtimer_cancel(hrtimer);
}
@@ -57,8 +67,11 @@ static void oprofile_hrtimer_stop(void)
{
int cpu;
+ get_online_cpus();
for_each_online_cpu(cpu)
__oprofile_hrtimer_stop(cpu);
+ ctr_running = 0;
+ put_online_cpus();
}
static int __cpuinit oprofile_cpu_notify(struct notifier_block *self,
diff --git a/drivers/video/sh_mipi_dsi.c b/drivers/video/sh_mipi_dsi.c
index 5699ce0c178..3f3d431033c 100644
--- a/drivers/video/sh_mipi_dsi.c
+++ b/drivers/video/sh_mipi_dsi.c
@@ -123,83 +123,87 @@ static int __init sh_mipi_setup(struct sh_mipi *mipi,
u32 linelength;
bool yuv;
- /* Select data format */
+ /*
+ * Select data format. MIPI DSI is not hot-pluggable, so, we just use
+ * the default videomode. If this ever becomes a problem, We'll have to
+ * move this to mipi_display_on() above and use info->var.xres
+ */
switch (pdata->data_format) {
case MIPI_RGB888:
pctype = 0;
datatype = MIPI_DSI_PACKED_PIXEL_STREAM_24;
pixfmt = MIPI_DCS_PIXEL_FMT_24BIT;
- linelength = ch->lcd_cfg.xres * 3;
+ linelength = ch->lcd_cfg[0].xres * 3;
yuv = false;
break;
case MIPI_RGB565:
pctype = 1;
datatype = MIPI_DSI_PACKED_PIXEL_STREAM_16;
pixfmt = MIPI_DCS_PIXEL_FMT_16BIT;
- linelength = ch->lcd_cfg.xres * 2;
+ linelength = ch->lcd_cfg[0].xres * 2;
yuv = false;
break;
case MIPI_RGB666_LP:
pctype = 2;
datatype = MIPI_DSI_PIXEL_STREAM_3BYTE_18;
pixfmt = MIPI_DCS_PIXEL_FMT_24BIT;
- linelength = ch->lcd_cfg.xres * 3;
+ linelength = ch->lcd_cfg[0].xres * 3;
yuv = false;
break;
case MIPI_RGB666:
pctype = 3;
datatype = MIPI_DSI_PACKED_PIXEL_STREAM_18;
pixfmt = MIPI_DCS_PIXEL_FMT_18BIT;
- linelength = (ch->lcd_cfg.xres * 18 + 7) / 8;
+ linelength = (ch->lcd_cfg[0].xres * 18 + 7) / 8;
yuv = false;
break;
case MIPI_BGR888:
pctype = 8;
datatype = MIPI_DSI_PACKED_PIXEL_STREAM_24;
pixfmt = MIPI_DCS_PIXEL_FMT_24BIT;
- linelength = ch->lcd_cfg.xres * 3;
+ linelength = ch->lcd_cfg[0].xres * 3;
yuv = false;
break;
case MIPI_BGR565:
pctype = 9;
datatype = MIPI_DSI_PACKED_PIXEL_STREAM_16;
pixfmt = MIPI_DCS_PIXEL_FMT_16BIT;
- linelength = ch->lcd_cfg.xres * 2;
+ linelength = ch->lcd_cfg[0].xres * 2;
yuv = false;
break;
case MIPI_BGR666_LP:
pctype = 0xa;
datatype = MIPI_DSI_PIXEL_STREAM_3BYTE_18;
pixfmt = MIPI_DCS_PIXEL_FMT_24BIT;
- linelength = ch->lcd_cfg.xres * 3;
+ linelength = ch->lcd_cfg[0].xres * 3;
yuv = false;
break;
case MIPI_BGR666:
pctype = 0xb;
datatype = MIPI_DSI_PACKED_PIXEL_STREAM_18;
pixfmt = MIPI_DCS_PIXEL_FMT_18BIT;
- linelength = (ch->lcd_cfg.xres * 18 + 7) / 8;
+ linelength = (ch->lcd_cfg[0].xres * 18 + 7) / 8;
yuv = false;
break;
case MIPI_YUYV:
pctype = 4;
datatype = MIPI_DSI_PACKED_PIXEL_STREAM_YCBCR16;
pixfmt = MIPI_DCS_PIXEL_FMT_16BIT;
- linelength = ch->lcd_cfg.xres * 2;
+ linelength = ch->lcd_cfg[0].xres * 2;
yuv = true;
break;
case MIPI_UYVY:
pctype = 5;
datatype = MIPI_DSI_PACKED_PIXEL_STREAM_YCBCR16;
pixfmt = MIPI_DCS_PIXEL_FMT_16BIT;
- linelength = ch->lcd_cfg.xres * 2;
+ linelength = ch->lcd_cfg[0].xres * 2;
yuv = true;
break;
case MIPI_YUV420_L:
pctype = 6;
datatype = MIPI_DSI_PACKED_PIXEL_STREAM_YCBCR12;
pixfmt = MIPI_DCS_PIXEL_FMT_12BIT;
- linelength = (ch->lcd_cfg.xres * 12 + 7) / 8;
+ linelength = (ch->lcd_cfg[0].xres * 12 + 7) / 8;
yuv = true;
break;
case MIPI_YUV420:
@@ -207,7 +211,7 @@ static int __init sh_mipi_setup(struct sh_mipi *mipi,
datatype = MIPI_DSI_PACKED_PIXEL_STREAM_YCBCR12;
pixfmt = MIPI_DCS_PIXEL_FMT_12BIT;
/* Length of U/V line */
- linelength = (ch->lcd_cfg.xres + 1) / 2;
+ linelength = (ch->lcd_cfg[0].xres + 1) / 2;
yuv = true;
break;
default:
@@ -281,7 +285,7 @@ static int __init sh_mipi_setup(struct sh_mipi *mipi,
iowrite32(0x00e00000, base + 0x8024); /* VMCTR2 */
/*
* 0x660 = 1632 bytes per line (RGB24, 544 pixels: see
- * sh_mobile_lcdc_info.ch[0].lcd_cfg.xres), HSALEN = 1 - default
+ * sh_mobile_lcdc_info.ch[0].lcd_cfg[0].xres), HSALEN = 1 - default
* (unused, since VMCTR2[HSABM] = 0)
*/
iowrite32(1 | (linelength << 16), base + 0x8028); /* VMLEN1 */
diff --git a/drivers/video/sh_mobile_hdmi.c b/drivers/video/sh_mobile_hdmi.c
index ef989d94511..55b3077ff6f 100644
--- a/drivers/video/sh_mobile_hdmi.c
+++ b/drivers/video/sh_mobile_hdmi.c
@@ -28,6 +28,8 @@
#include <video/sh_mobile_hdmi.h>
#include <video/sh_mobile_lcdc.h>
+#include "sh_mobile_lcdcfb.h"
+
#define HDMI_SYSTEM_CTRL 0x00 /* System control */
#define HDMI_L_R_DATA_SWAP_CTRL_RPKT 0x01 /* L/R data swap control,
bits 19..16 of 20-bit N for Audio Clock Regeneration packet */
@@ -206,12 +208,15 @@ enum hotplug_state {
struct sh_hdmi {
void __iomem *base;
- enum hotplug_state hp_state;
+ enum hotplug_state hp_state; /* hot-plug status */
+ bool preprogrammed_mode; /* use a pre-programmed VIC or the external mode */
struct clk *hdmi_clk;
struct device *dev;
struct fb_info *info;
+ struct mutex mutex; /* Protect the info pointer */
struct delayed_work edid_work;
struct fb_var_screeninfo var;
+ struct fb_monspecs monspec;
};
static void hdmi_write(struct sh_hdmi *hdmi, u8 data, u8 reg)
@@ -277,7 +282,7 @@ static struct snd_soc_codec_driver soc_codec_dev_sh_hdmi = {
*/
/* External video parameter settings */
-static void hdmi_external_video_param(struct sh_hdmi *hdmi)
+static void sh_hdmi_external_video_param(struct sh_hdmi *hdmi)
{
struct fb_var_screeninfo *var = &hdmi->var;
u16 htotal, hblank, hdelay, vtotal, vblank, vdelay, voffset;
@@ -309,9 +314,9 @@ static void hdmi_external_video_param(struct sh_hdmi *hdmi)
if (var->sync & FB_SYNC_VERT_HIGH_ACT)
sync |= 8;
- pr_debug("H: %u, %u, %u, %u; V: %u, %u, %u, %u; sync 0x%x\n",
- htotal, hblank, hdelay, var->hsync_len,
- vtotal, vblank, vdelay, var->vsync_len, sync);
+ dev_dbg(hdmi->dev, "H: %u, %u, %u, %u; V: %u, %u, %u, %u; sync 0x%x\n",
+ htotal, hblank, hdelay, var->hsync_len,
+ vtotal, vblank, vdelay, var->vsync_len, sync);
hdmi_write(hdmi, sync | (voffset << 4), HDMI_EXTERNAL_VIDEO_PARAM_SETTINGS);
@@ -336,7 +341,10 @@ static void hdmi_external_video_param(struct sh_hdmi *hdmi)
hdmi_write(hdmi, var->vsync_len, HDMI_EXTERNAL_V_DURATION);
- /* Set bit 0 of HDMI_EXTERNAL_VIDEO_PARAM_SETTINGS here for manual mode */
+ /* Set bit 0 of HDMI_EXTERNAL_VIDEO_PARAM_SETTINGS here for external mode */
+ if (!hdmi->preprogrammed_mode)
+ hdmi_write(hdmi, sync | 1 | (voffset << 4),
+ HDMI_EXTERNAL_VIDEO_PARAM_SETTINGS);
}
/**
@@ -454,21 +462,61 @@ static void sh_hdmi_audio_config(struct sh_hdmi *hdmi)
}
/**
- * sh_hdmi_phy_config()
+ * sh_hdmi_phy_config() - configure the HDMI PHY for the used video mode
*/
static void sh_hdmi_phy_config(struct sh_hdmi *hdmi)
{
- /* 720p, 8bit, 74.25MHz. Might need to be adjusted for other formats */
- hdmi_write(hdmi, 0x19, HDMI_SLIPHDMIT_PARAM_SETTINGS_1);
- hdmi_write(hdmi, 0x00, HDMI_SLIPHDMIT_PARAM_SETTINGS_2);
- hdmi_write(hdmi, 0x00, HDMI_SLIPHDMIT_PARAM_SETTINGS_3);
- /* PLLA_CONFIG[7:0]: VCO gain, VCO offset, LPF resistance[0] */
- hdmi_write(hdmi, 0x44, HDMI_SLIPHDMIT_PARAM_SETTINGS_5);
- hdmi_write(hdmi, 0x32, HDMI_SLIPHDMIT_PARAM_SETTINGS_6);
- hdmi_write(hdmi, 0x4A, HDMI_SLIPHDMIT_PARAM_SETTINGS_7);
- hdmi_write(hdmi, 0x0E, HDMI_SLIPHDMIT_PARAM_SETTINGS_8);
- hdmi_write(hdmi, 0x25, HDMI_SLIPHDMIT_PARAM_SETTINGS_9);
- hdmi_write(hdmi, 0x04, HDMI_SLIPHDMIT_PARAM_SETTINGS_10);
+ if (hdmi->var.yres > 480) {
+ /* 720p, 8bit, 74.25MHz. Might need to be adjusted for other formats */
+ /*
+ * [1:0] Speed_A
+ * [3:2] Speed_B
+ * [4] PLLA_Bypass
+ * [6] DRV_TEST_EN
+ * [7] DRV_TEST_IN
+ */
+ hdmi_write(hdmi, 0x0f, HDMI_SLIPHDMIT_PARAM_SETTINGS_1);
+ /* PLLB_CONFIG[17], PLLA_CONFIG[17] - not in PHY datasheet */
+ hdmi_write(hdmi, 0x00, HDMI_SLIPHDMIT_PARAM_SETTINGS_2);
+ /*
+ * [2:0] BGR_I_OFFSET
+ * [6:4] BGR_V_OFFSET
+ */
+ hdmi_write(hdmi, 0x00, HDMI_SLIPHDMIT_PARAM_SETTINGS_3);
+ /* PLLA_CONFIG[7:0]: VCO gain, VCO offset, LPF resistance[0] */
+ hdmi_write(hdmi, 0x44, HDMI_SLIPHDMIT_PARAM_SETTINGS_5);
+ /*
+ * PLLA_CONFIG[15:8]: regulator voltage[0], CP current,
+ * LPF capacitance, LPF resistance[1]
+ */
+ hdmi_write(hdmi, 0x32, HDMI_SLIPHDMIT_PARAM_SETTINGS_6);
+ /* PLLB_CONFIG[7:0]: LPF resistance[0], VCO offset, VCO gain */
+ hdmi_write(hdmi, 0x4A, HDMI_SLIPHDMIT_PARAM_SETTINGS_7);
+ /*
+ * PLLB_CONFIG[15:8]: regulator voltage[0], CP current,
+ * LPF capacitance, LPF resistance[1]
+ */
+ hdmi_write(hdmi, 0x00, HDMI_SLIPHDMIT_PARAM_SETTINGS_8);
+ /* DRV_CONFIG, PE_CONFIG */
+ hdmi_write(hdmi, 0x25, HDMI_SLIPHDMIT_PARAM_SETTINGS_9);
+ /*
+ * [2:0] AMON_SEL (4 == LPF voltage)
+ * [4] PLLA_CONFIG[16]
+ * [5] PLLB_CONFIG[16]
+ */
+ hdmi_write(hdmi, 0x04, HDMI_SLIPHDMIT_PARAM_SETTINGS_10);
+ } else {
+ /* for 480p8bit 27MHz */
+ hdmi_write(hdmi, 0x19, HDMI_SLIPHDMIT_PARAM_SETTINGS_1);
+ hdmi_write(hdmi, 0x00, HDMI_SLIPHDMIT_PARAM_SETTINGS_2);
+ hdmi_write(hdmi, 0x00, HDMI_SLIPHDMIT_PARAM_SETTINGS_3);
+ hdmi_write(hdmi, 0x44, HDMI_SLIPHDMIT_PARAM_SETTINGS_5);
+ hdmi_write(hdmi, 0x32, HDMI_SLIPHDMIT_PARAM_SETTINGS_6);
+ hdmi_write(hdmi, 0x48, HDMI_SLIPHDMIT_PARAM_SETTINGS_7);
+ hdmi_write(hdmi, 0x0F, HDMI_SLIPHDMIT_PARAM_SETTINGS_8);
+ hdmi_write(hdmi, 0x20, HDMI_SLIPHDMIT_PARAM_SETTINGS_9);
+ hdmi_write(hdmi, 0x04, HDMI_SLIPHDMIT_PARAM_SETTINGS_10);
+ }
}
/**
@@ -476,6 +524,8 @@ static void sh_hdmi_phy_config(struct sh_hdmi *hdmi)
*/
static void sh_hdmi_avi_infoframe_setup(struct sh_hdmi *hdmi)
{
+ u8 vic;
+
/* AVI InfoFrame */
hdmi_write(hdmi, 0x06, HDMI_CTRL_PKT_BUF_INDEX);
@@ -500,9 +550,9 @@ static void sh_hdmi_avi_infoframe_setup(struct sh_hdmi *hdmi)
hdmi_write(hdmi, 0x00, HDMI_CTRL_PKT_BUF_ACCESS_PB1);
/*
- * C = No Data
- * M = 16:9 Picture Aspect Ratio
- * R = Same as picture aspect ratio
+ * [7:6] C = Colorimetry: no data
+ * [5:4] M = 2: 16:9, 1: 4:3 Picture Aspect Ratio
+ * [3:0] R = 8: Active Frame Aspect Ratio: same as picture aspect ratio
*/
hdmi_write(hdmi, 0x28, HDMI_CTRL_PKT_BUF_ACCESS_PB2);
@@ -516,9 +566,15 @@ static void sh_hdmi_avi_infoframe_setup(struct sh_hdmi *hdmi)
/*
* VIC = 1280 x 720p: ignored if external config is used
- * Send 2 for 720 x 480p, 16 for 1080p
+ * Send 2 for 720 x 480p, 16 for 1080p, ignored in external mode
*/
- hdmi_write(hdmi, 4, HDMI_CTRL_PKT_BUF_ACCESS_PB4);
+ if (hdmi->var.yres == 1080 && hdmi->var.xres == 1920)
+ vic = 16;
+ else if (hdmi->var.yres == 480 && hdmi->var.xres == 720)
+ vic = 2;
+ else
+ vic = 4;
+ hdmi_write(hdmi, vic, HDMI_CTRL_PKT_BUF_ACCESS_PB4);
/* PR = No Repetition */
hdmi_write(hdmi, 0x00, HDMI_CTRL_PKT_BUF_ACCESS_PB5);
@@ -592,100 +648,6 @@ static void sh_hdmi_audio_infoframe_setup(struct sh_hdmi *hdmi)
}
/**
- * sh_hdmi_gamut_metadata_setup() - Gamut Metadata Packet of CONTROL PACKET
- */
-static void sh_hdmi_gamut_metadata_setup(struct sh_hdmi *hdmi)
-{
- int i;
-
- /* Gamut Metadata Packet */
- hdmi_write(hdmi, 0x04, HDMI_CTRL_PKT_BUF_INDEX);
-
- /* Packet Type = 0x0A */
- hdmi_write(hdmi, 0x0A, HDMI_CTRL_PKT_BUF_ACCESS_HB0);
- /* Gamut Packet is not used, so default value */
- hdmi_write(hdmi, 0x00, HDMI_CTRL_PKT_BUF_ACCESS_HB1);
- /* Gamut Packet is not used, so default value */
- hdmi_write(hdmi, 0x10, HDMI_CTRL_PKT_BUF_ACCESS_HB2);
-
- /* GBD bytes 0 through 27 */
- for (i = 0; i <= 27; i++)
- /* HDMI_CTRL_PKT_BUF_ACCESS_PB0_63H - PB27_7EH */
- hdmi_write(hdmi, 0x00, HDMI_CTRL_PKT_BUF_ACCESS_PB0 + i);
-}
-
-/**
- * sh_hdmi_acp_setup() - Audio Content Protection Packet (ACP)
- */
-static void sh_hdmi_acp_setup(struct sh_hdmi *hdmi)
-{
- int i;
-
- /* Audio Content Protection Packet (ACP) */
- hdmi_write(hdmi, 0x01, HDMI_CTRL_PKT_BUF_INDEX);
-
- /* Packet Type = 0x04 */
- hdmi_write(hdmi, 0x04, HDMI_CTRL_PKT_BUF_ACCESS_HB0);
- /* ACP_Type */
- hdmi_write(hdmi, 0x00, HDMI_CTRL_PKT_BUF_ACCESS_HB1);
- /* Reserved (0) */
- hdmi_write(hdmi, 0x00, HDMI_CTRL_PKT_BUF_ACCESS_HB2);
-
- /* GBD bytes 0 through 27 */
- for (i = 0; i <= 27; i++)
- /* HDMI_CTRL_PKT_BUF_ACCESS_PB0 - PB27 */
- hdmi_write(hdmi, 0x00, HDMI_CTRL_PKT_BUF_ACCESS_PB0 + i);
-}
-
-/**
- * sh_hdmi_isrc1_setup() - ISRC1 Packet
- */
-static void sh_hdmi_isrc1_setup(struct sh_hdmi *hdmi)
-{
- int i;
-
- /* ISRC1 Packet */
- hdmi_write(hdmi, 0x02, HDMI_CTRL_PKT_BUF_INDEX);
-
- /* Packet Type = 0x05 */
- hdmi_write(hdmi, 0x05, HDMI_CTRL_PKT_BUF_ACCESS_HB0);
- /* ISRC_Cont, ISRC_Valid, Reserved (0), ISRC_Status */
- hdmi_write(hdmi, 0x00, HDMI_CTRL_PKT_BUF_ACCESS_HB1);
- /* Reserved (0) */
- hdmi_write(hdmi, 0x00, HDMI_CTRL_PKT_BUF_ACCESS_HB2);
-
- /* PB0 UPC_EAN_ISRC_0-15 */
- /* Bytes PB16-PB27 shall be set to a value of 0. */
- for (i = 0; i <= 27; i++)
- /* HDMI_CTRL_PKT_BUF_ACCESS_PB0 - PB27 */
- hdmi_write(hdmi, 0x00, HDMI_CTRL_PKT_BUF_ACCESS_PB0 + i);
-}
-
-/**
- * sh_hdmi_isrc2_setup() - ISRC2 Packet
- */
-static void sh_hdmi_isrc2_setup(struct sh_hdmi *hdmi)
-{
- int i;
-
- /* ISRC2 Packet */
- hdmi_write(hdmi, 0x03, HDMI_CTRL_PKT_BUF_INDEX);
-
- /* HB0 Packet Type = 0x06 */
- hdmi_write(hdmi, 0x06, HDMI_CTRL_PKT_BUF_ACCESS_HB0);
- /* Reserved (0) */
- hdmi_write(hdmi, 0x00, HDMI_CTRL_PKT_BUF_ACCESS_HB1);
- /* Reserved (0) */
- hdmi_write(hdmi, 0x00, HDMI_CTRL_PKT_BUF_ACCESS_HB2);
-
- /* PB0 UPC_EAN_ISRC_16-31 */
- /* Bytes PB16-PB27 shall be set to a value of 0. */
- for (i = 0; i <= 27; i++)
- /* HDMI_CTRL_PKT_BUF_ACCESS_PB0 - PB27 */
- hdmi_write(hdmi, 0x00, HDMI_CTRL_PKT_BUF_ACCESS_PB0 + i);
-}
-
-/**
* sh_hdmi_configure() - Initialise HDMI for output
*/
static void sh_hdmi_configure(struct sh_hdmi *hdmi)
@@ -705,18 +667,6 @@ static void sh_hdmi_configure(struct sh_hdmi *hdmi)
/* Audio InfoFrame */
sh_hdmi_audio_infoframe_setup(hdmi);
- /* Gamut Metadata packet */
- sh_hdmi_gamut_metadata_setup(hdmi);
-
- /* Audio Content Protection (ACP) Packet */
- sh_hdmi_acp_setup(hdmi);
-
- /* ISRC1 Packet */
- sh_hdmi_isrc1_setup(hdmi);
-
- /* ISRC2 Packet */
- sh_hdmi_isrc2_setup(hdmi);
-
/*
* Control packet auto send with VSYNC control: auto send
* General control, Gamut metadata, ISRC, and ACP packets
@@ -734,17 +684,42 @@ static void sh_hdmi_configure(struct sh_hdmi *hdmi)
hdmi_write(hdmi, 0x40, HDMI_SYSTEM_CTRL);
}
-static void sh_hdmi_read_edid(struct sh_hdmi *hdmi)
+static unsigned long sh_hdmi_rate_error(struct sh_hdmi *hdmi,
+ const struct fb_videomode *mode)
{
- struct fb_var_screeninfo *var = &hdmi->var;
- struct sh_mobile_hdmi_info *pdata = hdmi->dev->platform_data;
- struct fb_videomode *lcd_cfg = &pdata->lcd_chan->lcd_cfg;
- unsigned long height = var->height, width = var->width;
- int i;
+ long target = PICOS2KHZ(mode->pixclock) * 1000,
+ rate = clk_round_rate(hdmi->hdmi_clk, target);
+ unsigned long rate_error = rate > 0 ? abs(rate - target) : ULONG_MAX;
+
+ dev_dbg(hdmi->dev, "%u-%u-%u-%u x %u-%u-%u-%u\n",
+ mode->left_margin, mode->xres,
+ mode->right_margin, mode->hsync_len,
+ mode->upper_margin, mode->yres,
+ mode->lower_margin, mode->vsync_len);
+
+ dev_dbg(hdmi->dev, "\t@%lu(+/-%lu)Hz, e=%lu / 1000, r=%uHz\n", target,
+ rate_error, rate_error ? 10000 / (10 * target / rate_error) : 0,
+ mode->refresh);
+
+ return rate_error;
+}
+
+static int sh_hdmi_read_edid(struct sh_hdmi *hdmi)
+{
+ struct fb_var_screeninfo tmpvar;
+ struct fb_var_screeninfo *var = &tmpvar;
+ const struct fb_videomode *mode, *found = NULL;
+ struct fb_info *info = hdmi->info;
+ struct fb_modelist *modelist = NULL;
+ unsigned int f_width = 0, f_height = 0, f_refresh = 0;
+ unsigned long found_rate_error = ULONG_MAX; /* silly compiler... */
+ bool exact_match = false;
u8 edid[128];
+ char *forced;
+ int i;
/* Read EDID */
- pr_debug("Read back EDID code:");
+ dev_dbg(hdmi->dev, "Read back EDID code:");
for (i = 0; i < 128; i++) {
edid[i] = hdmi_read(hdmi, HDMI_EDID_KSV_FIFO_ACCESS_WINDOW);
#ifdef DEBUG
@@ -759,29 +734,97 @@ static void sh_hdmi_read_edid(struct sh_hdmi *hdmi)
#ifdef DEBUG
printk(KERN_CONT "\n");
#endif
- fb_parse_edid(edid, var);
- pr_debug("%u-%u-%u-%u x %u-%u-%u-%u @ %lu kHz monitor detected\n",
- var->left_margin, var->xres, var->right_margin, var->hsync_len,
- var->upper_margin, var->yres, var->lower_margin, var->vsync_len,
- PICOS2KHZ(var->pixclock));
-
- /* FIXME: Use user-provided configuration instead of EDID */
- var->width = width;
- var->xres = lcd_cfg->xres;
- var->xres_virtual = lcd_cfg->xres;
- var->left_margin = lcd_cfg->left_margin;
- var->right_margin = lcd_cfg->right_margin;
- var->hsync_len = lcd_cfg->hsync_len;
- var->height = height;
- var->yres = lcd_cfg->yres;
- var->yres_virtual = lcd_cfg->yres * 2;
- var->upper_margin = lcd_cfg->upper_margin;
- var->lower_margin = lcd_cfg->lower_margin;
- var->vsync_len = lcd_cfg->vsync_len;
- var->sync = lcd_cfg->sync;
- var->pixclock = lcd_cfg->pixclock;
-
- hdmi_external_video_param(hdmi);
+
+ fb_edid_to_monspecs(edid, &hdmi->monspec);
+
+ fb_get_options("sh_mobile_lcdc", &forced);
+ if (forced && *forced) {
+ /* Only primitive parsing so far */
+ i = sscanf(forced, "%ux%u@%u",
+ &f_width, &f_height, &f_refresh);
+ if (i < 2) {
+ f_width = 0;
+ f_height = 0;
+ }
+ dev_dbg(hdmi->dev, "Forced mode %ux%u@%uHz\n",
+ f_width, f_height, f_refresh);
+ }
+
+ /* Walk monitor modes to find the best or the exact match */
+ for (i = 0, mode = hdmi->monspec.modedb;
+ f_width && f_height && i < hdmi->monspec.modedb_len && !exact_match;
+ i++, mode++) {
+ unsigned long rate_error = sh_hdmi_rate_error(hdmi, mode);
+
+ /* No interest in unmatching modes */
+ if (f_width != mode->xres || f_height != mode->yres)
+ continue;
+ if (f_refresh == mode->refresh || (!f_refresh && !rate_error))
+ /*
+ * Exact match if either the refresh rate matches or it
+ * hasn't been specified and we've found a mode, for
+ * which we can configure the clock precisely
+ */
+ exact_match = true;
+ else if (found && found_rate_error <= rate_error)
+ /*
+ * We otherwise search for the closest matching clock
+ * rate - either if no refresh rate has been specified
+ * or we cannot find an exactly matching one
+ */
+ continue;
+
+ /* Check if supported: sufficient fb memory, supported clock-rate */
+ fb_videomode_to_var(var, mode);
+
+ if (info && info->fbops->fb_check_var &&
+ info->fbops->fb_check_var(var, info)) {
+ exact_match = false;
+ continue;
+ }
+
+ found = mode;
+ found_rate_error = rate_error;
+ }
+
+ /*
+ * TODO 1: if no ->info is present, postpone running the config until
+ * after ->info first gets registered.
+ * TODO 2: consider registering the HDMI platform device from the LCDC
+ * driver, and passing ->info with HDMI platform data.
+ */
+ if (info && !found) {
+ modelist = hdmi->info->modelist.next &&
+ !list_empty(&hdmi->info->modelist) ?
+ list_entry(hdmi->info->modelist.next,
+ struct fb_modelist, list) :
+ NULL;
+
+ if (modelist) {
+ found = &modelist->mode;
+ found_rate_error = sh_hdmi_rate_error(hdmi, found);
+ }
+ }
+
+ /* No cookie today */
+ if (!found)
+ return -ENXIO;
+
+ dev_info(hdmi->dev, "Using %s mode %ux%u@%uHz (%luHz), clock error %luHz\n",
+ modelist ? "default" : "EDID", found->xres, found->yres,
+ found->refresh, PICOS2KHZ(found->pixclock) * 1000, found_rate_error);
+
+ if ((found->xres == 720 && found->yres == 480) ||
+ (found->xres == 1280 && found->yres == 720) ||
+ (found->xres == 1920 && found->yres == 1080))
+ hdmi->preprogrammed_mode = true;
+ else
+ hdmi->preprogrammed_mode = false;
+
+ fb_videomode_to_var(&hdmi->var, found);
+ sh_hdmi_external_video_param(hdmi);
+
+ return 0;
}
static irqreturn_t sh_hdmi_hotplug(int irq, void *dev_id)
@@ -809,8 +852,8 @@ static irqreturn_t sh_hdmi_hotplug(int irq, void *dev_id)
hdmi_write(hdmi, 0xFF, HDMI_INTERRUPT_STATUS_2);
if (printk_ratelimit())
- pr_debug("IRQ #%d: Status #1: 0x%x & 0x%x, #2: 0x%x & 0x%x\n",
- irq, status1, mask1, status2, mask2);
+ dev_dbg(hdmi->dev, "IRQ #%d: Status #1: 0x%x & 0x%x, #2: 0x%x & 0x%x\n",
+ irq, status1, mask1, status2, mask2);
if (!((status1 & mask1) | (status2 & mask2))) {
return IRQ_NONE;
@@ -821,7 +864,7 @@ static irqreturn_t sh_hdmi_hotplug(int irq, void *dev_id)
udelay(500);
msens = hdmi_read(hdmi, HDMI_HOT_PLUG_MSENS_STATUS);
- pr_debug("MSENS 0x%x\n", msens);
+ dev_dbg(hdmi->dev, "MSENS 0x%x\n", msens);
/* Check, if hot plug & MSENS pin status are both high */
if ((msens & 0xC0) == 0xC0) {
/* Display plug in */
@@ -857,83 +900,176 @@ static irqreturn_t sh_hdmi_hotplug(int irq, void *dev_id)
return IRQ_HANDLED;
}
-static void hdmi_display_on(void *arg, struct fb_info *info)
+/* locking: called with info->lock held, or before register_framebuffer() */
+static void sh_hdmi_display_on(void *arg, struct fb_info *info)
{
+ /*
+ * info is guaranteed to be valid, when we are called, because our
+ * FB_EVENT_FB_UNBIND notify is also called with info->lock held
+ */
struct sh_hdmi *hdmi = arg;
struct sh_mobile_hdmi_info *pdata = hdmi->dev->platform_data;
+ struct sh_mobile_lcdc_chan *ch = info->par;
- if (info->var.xres != 1280 || info->var.yres != 720) {
- dev_warn(info->device, "Unsupported framebuffer geometry %ux%u\n",
- info->var.xres, info->var.yres);
- return;
- }
+ dev_dbg(hdmi->dev, "%s(%p): state %x\n", __func__,
+ pdata->lcd_dev, info->state);
+
+ /* No need to lock */
+ hdmi->info = info;
- pr_debug("%s(%p): state %x\n", __func__, pdata->lcd_dev, info->state);
/*
- * FIXME: not a good place to store fb_info. And we cannot nullify it
- * even on monitor disconnect. What should the lifecycle be?
+ * hp_state can be set to
+ * HDMI_HOTPLUG_DISCONNECTED: on monitor unplug
+ * HDMI_HOTPLUG_CONNECTED: on monitor plug-in
+ * HDMI_HOTPLUG_EDID_DONE: on EDID read completion
*/
- hdmi->info = info;
switch (hdmi->hp_state) {
case HDMI_HOTPLUG_EDID_DONE:
/* PS mode d->e. All functions are active */
hdmi_write(hdmi, 0x80, HDMI_SYSTEM_CTRL);
- pr_debug("HDMI running\n");
+ dev_dbg(hdmi->dev, "HDMI running\n");
break;
case HDMI_HOTPLUG_DISCONNECTED:
info->state = FBINFO_STATE_SUSPENDED;
default:
- hdmi->var = info->var;
+ hdmi->var = ch->display_var;
}
}
-static void hdmi_display_off(void *arg)
+/* locking: called with info->lock held */
+static void sh_hdmi_display_off(void *arg)
{
struct sh_hdmi *hdmi = arg;
struct sh_mobile_hdmi_info *pdata = hdmi->dev->platform_data;
- pr_debug("%s(%p)\n", __func__, pdata->lcd_dev);
+ dev_dbg(hdmi->dev, "%s(%p)\n", __func__, pdata->lcd_dev);
/* PS mode e->a */
hdmi_write(hdmi, 0x10, HDMI_SYSTEM_CTRL);
}
+static bool sh_hdmi_must_reconfigure(struct sh_hdmi *hdmi)
+{
+ struct fb_info *info = hdmi->info;
+ struct sh_mobile_lcdc_chan *ch = info->par;
+ struct fb_var_screeninfo *new_var = &hdmi->var, *old_var = &ch->display_var;
+ struct fb_videomode mode1, mode2;
+
+ fb_var_to_videomode(&mode1, old_var);
+ fb_var_to_videomode(&mode2, new_var);
+
+ dev_dbg(info->dev, "Old %ux%u, new %ux%u\n",
+ mode1.xres, mode1.yres, mode2.xres, mode2.yres);
+
+ if (fb_mode_is_equal(&mode1, &mode2))
+ return false;
+
+ dev_dbg(info->dev, "Switching %u -> %u lines\n",
+ mode1.yres, mode2.yres);
+ *old_var = *new_var;
+
+ return true;
+}
+
+/**
+ * sh_hdmi_clk_configure() - set HDMI clock frequency and enable the clock
+ * @hdmi: driver context
+ * @pixclock: pixel clock period in picoseconds
+ * return: configured positive rate if successful
+ * 0 if couldn't set the rate, but managed to enable the clock
+ * negative error, if couldn't enable the clock
+ */
+static long sh_hdmi_clk_configure(struct sh_hdmi *hdmi, unsigned long pixclock)
+{
+ long rate;
+ int ret;
+
+ rate = PICOS2KHZ(pixclock) * 1000;
+ rate = clk_round_rate(hdmi->hdmi_clk, rate);
+ if (rate > 0) {
+ ret = clk_set_rate(hdmi->hdmi_clk, rate);
+ if (ret < 0) {
+ dev_warn(hdmi->dev, "Cannot set rate %ld: %d\n", rate, ret);
+ rate = 0;
+ } else {
+ dev_dbg(hdmi->dev, "HDMI set frequency %lu\n", rate);
+ }
+ } else {
+ rate = 0;
+ dev_warn(hdmi->dev, "Cannot get suitable rate: %ld\n", rate);
+ }
+
+ ret = clk_enable(hdmi->hdmi_clk);
+ if (ret < 0) {
+ dev_err(hdmi->dev, "Cannot enable clock: %d\n", ret);
+ return ret;
+ }
+
+ return rate;
+}
+
/* Hotplug interrupt occurred, read EDID */
-static void edid_work_fn(struct work_struct *work)
+static void sh_hdmi_edid_work_fn(struct work_struct *work)
{
struct sh_hdmi *hdmi = container_of(work, struct sh_hdmi, edid_work.work);
struct sh_mobile_hdmi_info *pdata = hdmi->dev->platform_data;
+ struct sh_mobile_lcdc_chan *ch;
+ int ret;
- pr_debug("%s(%p): begin, hotplug status %d\n", __func__,
- pdata->lcd_dev, hdmi->hp_state);
+ dev_dbg(hdmi->dev, "%s(%p): begin, hotplug status %d\n", __func__,
+ pdata->lcd_dev, hdmi->hp_state);
if (!pdata->lcd_dev)
return;
+ mutex_lock(&hdmi->mutex);
+
if (hdmi->hp_state == HDMI_HOTPLUG_EDID_DONE) {
- pm_runtime_get_sync(hdmi->dev);
/* A device has been plugged in */
- sh_hdmi_read_edid(hdmi);
+ pm_runtime_get_sync(hdmi->dev);
+
+ ret = sh_hdmi_read_edid(hdmi);
+ if (ret < 0)
+ goto out;
+
+ /* Reconfigure the clock */
+ clk_disable(hdmi->hdmi_clk);
+ ret = sh_hdmi_clk_configure(hdmi, hdmi->var.pixclock);
+ if (ret < 0)
+ goto out;
+
msleep(10);
sh_hdmi_configure(hdmi);
/* Switched to another (d) power-save mode */
msleep(10);
if (!hdmi->info)
- return;
+ goto out;
+
+ ch = hdmi->info->par;
acquire_console_sem();
/* HDMI plug in */
- hdmi->info->var = hdmi->var;
- if (hdmi->info->state != FBINFO_STATE_RUNNING)
+ if (!sh_hdmi_must_reconfigure(hdmi) &&
+ hdmi->info->state == FBINFO_STATE_RUNNING) {
+ /*
+ * First activation with the default monitor - just turn
+ * on, if we run a resume here, the logo disappears
+ */
+ if (lock_fb_info(hdmi->info)) {
+ sh_hdmi_display_on(hdmi, hdmi->info);
+ unlock_fb_info(hdmi->info);
+ }
+ } else {
+ /* New monitor or have to wake up */
fb_set_suspend(hdmi->info, 0);
- else
- hdmi_display_on(hdmi, hdmi->info);
+ }
release_console_sem();
} else {
+ ret = 0;
if (!hdmi->info)
- return;
+ goto out;
acquire_console_sem();
@@ -942,15 +1078,67 @@ static void edid_work_fn(struct work_struct *work)
release_console_sem();
pm_runtime_put(hdmi->dev);
+ fb_destroy_modedb(hdmi->monspec.modedb);
}
- pr_debug("%s(%p): end\n", __func__, pdata->lcd_dev);
+out:
+ if (ret < 0)
+ hdmi->hp_state = HDMI_HOTPLUG_DISCONNECTED;
+ mutex_unlock(&hdmi->mutex);
+
+ dev_dbg(hdmi->dev, "%s(%p): end\n", __func__, pdata->lcd_dev);
+}
+
+static int sh_hdmi_notify(struct notifier_block *nb,
+ unsigned long action, void *data);
+
+static struct notifier_block sh_hdmi_notifier = {
+ .notifier_call = sh_hdmi_notify,
+};
+
+static int sh_hdmi_notify(struct notifier_block *nb,
+ unsigned long action, void *data)
+{
+ struct fb_event *event = data;
+ struct fb_info *info = event->info;
+ struct sh_mobile_lcdc_chan *ch = info->par;
+ struct sh_mobile_lcdc_board_cfg *board_cfg = &ch->cfg.board_cfg;
+ struct sh_hdmi *hdmi = board_cfg->board_data;
+
+ if (nb != &sh_hdmi_notifier || !hdmi || hdmi->info != info)
+ return NOTIFY_DONE;
+
+ switch(action) {
+ case FB_EVENT_FB_REGISTERED:
+ /* Unneeded, activation taken care by sh_hdmi_display_on() */
+ break;
+ case FB_EVENT_FB_UNREGISTERED:
+ /*
+ * We are called from unregister_framebuffer() with the
+ * info->lock held. This is bad for us, because we can race with
+ * the scheduled work, which has to call fb_set_suspend(), which
+ * takes info->lock internally, so, sh_hdmi_edid_work_fn()
+ * cannot take and hold info->lock for the whole function
+ * duration. Using an additional lock creates a classical AB-BA
+ * lock up. Therefore, we have to release the info->lock
+ * temporarily, synchronise with the work queue and re-acquire
+ * the info->lock.
+ */
+ unlock_fb_info(hdmi->info);
+ mutex_lock(&hdmi->mutex);
+ hdmi->info = NULL;
+ mutex_unlock(&hdmi->mutex);
+ lock_fb_info(hdmi->info);
+ return NOTIFY_OK;
+ }
+ return NOTIFY_DONE;
}
static int __init sh_hdmi_probe(struct platform_device *pdev)
{
struct sh_mobile_hdmi_info *pdata = pdev->dev.platform_data;
struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ struct sh_mobile_lcdc_board_cfg *board_cfg;
int irq = platform_get_irq(pdev, 0), ret;
struct sh_hdmi *hdmi;
long rate;
@@ -964,10 +1152,7 @@ static int __init sh_hdmi_probe(struct platform_device *pdev)
return -ENOMEM;
}
- ret = snd_soc_register_codec(&pdev->dev,
- &soc_codec_dev_sh_hdmi, &sh_hdmi_dai, 1);
- if (ret < 0)
- goto esndreg;
+ mutex_init(&hdmi->mutex);
hdmi->dev = &pdev->dev;
@@ -978,30 +1163,14 @@ static int __init sh_hdmi_probe(struct platform_device *pdev)
goto egetclk;
}
- rate = PICOS2KHZ(pdata->lcd_chan->lcd_cfg.pixclock) * 1000;
-
- rate = clk_round_rate(hdmi->hdmi_clk, rate);
+ /* Some arbitrary relaxed pixclock just to get things started */
+ rate = sh_hdmi_clk_configure(hdmi, 37037);
if (rate < 0) {
ret = rate;
- dev_err(&pdev->dev, "Cannot get suitable rate: %ld\n", rate);
goto erate;
}
- ret = clk_set_rate(hdmi->hdmi_clk, rate);
- if (ret < 0) {
- dev_err(&pdev->dev, "Cannot set rate %ld: %d\n", rate, ret);
- goto erate;
- }
-
- pr_debug("HDMI set frequency %lu\n", rate);
-
- ret = clk_enable(hdmi->hdmi_clk);
- if (ret < 0) {
- dev_err(&pdev->dev, "Cannot enable clock: %d\n", ret);
- goto eclkenable;
- }
-
- dev_info(&pdev->dev, "Enabled HDMI clock at %luHz\n", rate);
+ dev_dbg(&pdev->dev, "Enabled HDMI clock at %luHz\n", rate);
if (!request_mem_region(res->start, resource_size(res), dev_name(&pdev->dev))) {
dev_err(&pdev->dev, "HDMI register region already claimed\n");
@@ -1018,18 +1187,18 @@ static int __init sh_hdmi_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, hdmi);
-#if 1
/* Product and revision IDs are 0 in sh-mobile version */
dev_info(&pdev->dev, "Detected HDMI controller 0x%x:0x%x\n",
hdmi_read(hdmi, HDMI_PRODUCT_ID), hdmi_read(hdmi, HDMI_REVISION_ID));
-#endif
/* Set up LCDC callbacks */
- pdata->lcd_chan->board_cfg.board_data = hdmi;
- pdata->lcd_chan->board_cfg.display_on = hdmi_display_on;
- pdata->lcd_chan->board_cfg.display_off = hdmi_display_off;
+ board_cfg = &pdata->lcd_chan->board_cfg;
+ board_cfg->owner = THIS_MODULE;
+ board_cfg->board_data = hdmi;
+ board_cfg->display_on = sh_hdmi_display_on;
+ board_cfg->display_off = sh_hdmi_display_off;
- INIT_DELAYED_WORK(&hdmi->edid_work, edid_work_fn);
+ INIT_DELAYED_WORK(&hdmi->edid_work, sh_hdmi_edid_work_fn);
pm_runtime_enable(&pdev->dev);
pm_runtime_resume(&pdev->dev);
@@ -1041,8 +1210,17 @@ static int __init sh_hdmi_probe(struct platform_device *pdev)
goto ereqirq;
}
+ ret = snd_soc_register_codec(&pdev->dev,
+ &soc_codec_dev_sh_hdmi, &sh_hdmi_dai, 1);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "codec registration failed\n");
+ goto ecodec;
+ }
+
return 0;
+ecodec:
+ free_irq(irq, hdmi);
ereqirq:
pm_runtime_disable(&pdev->dev);
iounmap(hdmi->base);
@@ -1050,12 +1228,10 @@ emap:
release_mem_region(res->start, resource_size(res));
ereqreg:
clk_disable(hdmi->hdmi_clk);
-eclkenable:
erate:
clk_put(hdmi->hdmi_clk);
egetclk:
- snd_soc_unregister_codec(&pdev->dev);
-esndreg:
+ mutex_destroy(&hdmi->mutex);
kfree(hdmi);
return ret;
@@ -1066,21 +1242,26 @@ static int __exit sh_hdmi_remove(struct platform_device *pdev)
struct sh_mobile_hdmi_info *pdata = pdev->dev.platform_data;
struct sh_hdmi *hdmi = platform_get_drvdata(pdev);
struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ struct sh_mobile_lcdc_board_cfg *board_cfg = &pdata->lcd_chan->board_cfg;
int irq = platform_get_irq(pdev, 0);
snd_soc_unregister_codec(&pdev->dev);
- pdata->lcd_chan->board_cfg.display_on = NULL;
- pdata->lcd_chan->board_cfg.display_off = NULL;
- pdata->lcd_chan->board_cfg.board_data = NULL;
+ board_cfg->display_on = NULL;
+ board_cfg->display_off = NULL;
+ board_cfg->board_data = NULL;
+ board_cfg->owner = NULL;
+ /* No new work will be scheduled, wait for running ISR */
free_irq(irq, hdmi);
- pm_runtime_disable(&pdev->dev);
+ /* Wait for already scheduled work */
cancel_delayed_work_sync(&hdmi->edid_work);
+ pm_runtime_disable(&pdev->dev);
clk_disable(hdmi->hdmi_clk);
clk_put(hdmi->hdmi_clk);
iounmap(hdmi->base);
release_mem_region(res->start, resource_size(res));
+ mutex_destroy(&hdmi->mutex);
kfree(hdmi);
return 0;
diff --git a/drivers/video/sh_mobile_lcdcfb.c b/drivers/video/sh_mobile_lcdcfb.c
index 7a1419279c8..50963739a40 100644
--- a/drivers/video/sh_mobile_lcdcfb.c
+++ b/drivers/video/sh_mobile_lcdcfb.c
@@ -12,7 +12,6 @@
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/mm.h>
-#include <linux/fb.h>
#include <linux/clk.h>
#include <linux/pm_runtime.h>
#include <linux/platform_device.h>
@@ -21,10 +20,12 @@
#include <linux/vmalloc.h>
#include <linux/ioctl.h>
#include <linux/slab.h>
+#include <linux/console.h>
#include <video/sh_mobile_lcdc.h>
#include <asm/atomic.h>
-#define PALETTE_NR 16
+#include "sh_mobile_lcdcfb.h"
+
#define SIDE_B_OFFSET 0x1000
#define MIRROR_OFFSET 0x2000
@@ -53,11 +54,8 @@ static int lcdc_shared_regs[] = {
};
#define NR_SHARED_REGS ARRAY_SIZE(lcdc_shared_regs)
-/* per-channel registers */
-enum { LDDCKPAT1R, LDDCKPAT2R, LDMT1R, LDMT2R, LDMT3R, LDDFR, LDSM1R,
- LDSM2R, LDSA1R, LDMLSR, LDHCNR, LDHSYNR, LDVLNR, LDVSYNR, LDPMR,
- LDHAJR,
- NR_CH_REGS };
+#define DEFAULT_XRES 1280
+#define DEFAULT_YRES 1024
static unsigned long lcdc_offs_mainlcd[NR_CH_REGS] = {
[LDDCKPAT1R] = 0x400,
@@ -112,23 +110,21 @@ static unsigned long lcdc_offs_sublcd[NR_CH_REGS] = {
#define LDRCNTR_MRC 0x00000001
#define LDSR_MRS 0x00000100
-struct sh_mobile_lcdc_priv;
-struct sh_mobile_lcdc_chan {
- struct sh_mobile_lcdc_priv *lcdc;
- unsigned long *reg_offs;
- unsigned long ldmt1r_value;
- unsigned long enabled; /* ME and SE in LDCNT2R */
- struct sh_mobile_lcdc_chan_cfg cfg;
- u32 pseudo_palette[PALETTE_NR];
- unsigned long saved_ch_regs[NR_CH_REGS];
- struct fb_info *info;
- dma_addr_t dma_handle;
- struct fb_deferred_io defio;
- struct scatterlist *sglist;
- unsigned long frame_end;
- unsigned long pan_offset;
- wait_queue_head_t frame_end_wait;
- struct completion vsync_completion;
+static const struct fb_videomode default_720p = {
+ .name = "HDMI 720p",
+ .xres = 1280,
+ .yres = 720,
+
+ .left_margin = 200,
+ .right_margin = 88,
+ .hsync_len = 48,
+
+ .upper_margin = 20,
+ .lower_margin = 5,
+ .vsync_len = 5,
+
+ .pixclock = 13468,
+ .sync = FB_SYNC_VERT_HIGH_ACT | FB_SYNC_HOR_HIGH_ACT,
};
struct sh_mobile_lcdc_priv {
@@ -409,8 +405,8 @@ static void sh_mobile_lcdc_start_stop(struct sh_mobile_lcdc_priv *priv,
static void sh_mobile_lcdc_geometry(struct sh_mobile_lcdc_chan *ch)
{
- struct fb_var_screeninfo *var = &ch->info->var;
- unsigned long h_total, hsync_pos;
+ struct fb_var_screeninfo *var = &ch->info->var, *display_var = &ch->display_var;
+ unsigned long h_total, hsync_pos, display_h_total;
u32 tmp;
tmp = ch->ldmt1r_value;
@@ -428,31 +424,33 @@ static void sh_mobile_lcdc_geometry(struct sh_mobile_lcdc_chan *ch)
lcdc_write_chan(ch, LDMT3R, ch->cfg.sys_bus_cfg.ldmt3r);
/* horizontal configuration */
- h_total = var->xres + var->hsync_len +
- var->left_margin + var->right_margin;
+ h_total = display_var->xres + display_var->hsync_len +
+ display_var->left_margin + display_var->right_margin;
tmp = h_total / 8; /* HTCN */
- tmp |= (var->xres / 8) << 16; /* HDCN */
+ tmp |= (min(display_var->xres, var->xres) / 8) << 16; /* HDCN */
lcdc_write_chan(ch, LDHCNR, tmp);
- hsync_pos = var->xres + var->right_margin;
+ hsync_pos = display_var->xres + display_var->right_margin;
tmp = hsync_pos / 8; /* HSYNP */
- tmp |= (var->hsync_len / 8) << 16; /* HSYNW */
+ tmp |= (display_var->hsync_len / 8) << 16; /* HSYNW */
lcdc_write_chan(ch, LDHSYNR, tmp);
/* vertical configuration */
- tmp = var->yres + var->vsync_len +
- var->upper_margin + var->lower_margin; /* VTLN */
- tmp |= var->yres << 16; /* VDLN */
+ tmp = display_var->yres + display_var->vsync_len +
+ display_var->upper_margin + display_var->lower_margin; /* VTLN */
+ tmp |= min(display_var->yres, var->yres) << 16; /* VDLN */
lcdc_write_chan(ch, LDVLNR, tmp);
- tmp = var->yres + var->lower_margin; /* VSYNP */
- tmp |= var->vsync_len << 16; /* VSYNW */
+ tmp = display_var->yres + display_var->lower_margin; /* VSYNP */
+ tmp |= display_var->vsync_len << 16; /* VSYNW */
lcdc_write_chan(ch, LDVSYNR, tmp);
/* Adjust horizontal synchronisation for HDMI */
- tmp = ((var->xres & 7) << 24) |
- ((h_total & 7) << 16) |
- ((var->hsync_len & 7) << 8) |
+ display_h_total = display_var->xres + display_var->hsync_len +
+ display_var->left_margin + display_var->right_margin;
+ tmp = ((display_var->xres & 7) << 24) |
+ ((display_h_total & 7) << 16) |
+ ((display_var->hsync_len & 7) << 8) |
hsync_pos;
lcdc_write_chan(ch, LDHAJR, tmp);
}
@@ -460,7 +458,6 @@ static void sh_mobile_lcdc_geometry(struct sh_mobile_lcdc_chan *ch)
static int sh_mobile_lcdc_start(struct sh_mobile_lcdc_priv *priv)
{
struct sh_mobile_lcdc_chan *ch;
- struct fb_videomode *lcd_cfg;
struct sh_mobile_lcdc_board_cfg *board_cfg;
unsigned long tmp;
int k, m;
@@ -503,7 +500,8 @@ static int sh_mobile_lcdc_start(struct sh_mobile_lcdc_priv *priv)
m = 1 << 6;
tmp |= m << (lcdc_chan_is_sublcd(ch) ? 8 : 0);
- lcdc_write_chan(ch, LDDCKPAT1R, 0x00000000);
+ /* FIXME: sh7724 can only use 42, 48, 54 and 60 for the divider denominator */
+ lcdc_write_chan(ch, LDDCKPAT1R, 0);
lcdc_write_chan(ch, LDDCKPAT2R, (1 << (m/2)) - 1);
}
@@ -518,7 +516,6 @@ static int sh_mobile_lcdc_start(struct sh_mobile_lcdc_priv *priv)
for (k = 0; k < ARRAY_SIZE(priv->ch); k++) {
ch = &priv->ch[k];
- lcd_cfg = &ch->cfg.lcd_cfg;
if (!ch->enabled)
continue;
@@ -547,7 +544,7 @@ static int sh_mobile_lcdc_start(struct sh_mobile_lcdc_priv *priv)
/* set bpp format in PKF[4:0] */
tmp = lcdc_read_chan(ch, LDDFR);
- tmp &= ~(0x0001001f);
+ tmp &= ~0x0001001f;
tmp |= (ch->info->var.bits_per_pixel == 16) ? 3 : 0;
lcdc_write_chan(ch, LDDFR, tmp);
@@ -591,8 +588,10 @@ static int sh_mobile_lcdc_start(struct sh_mobile_lcdc_priv *priv)
continue;
board_cfg = &ch->cfg.board_cfg;
- if (board_cfg->display_on)
+ if (try_module_get(board_cfg->owner) && board_cfg->display_on) {
board_cfg->display_on(board_cfg->board_data, ch->info);
+ module_put(board_cfg->owner);
+ }
}
return 0;
@@ -614,7 +613,7 @@ static void sh_mobile_lcdc_stop(struct sh_mobile_lcdc_priv *priv)
* flush frame, and wait for frame end interrupt
* clean up deferred io and enable clock
*/
- if (ch->info->fbdefio) {
+ if (ch->info && ch->info->fbdefio) {
ch->frame_end = 0;
schedule_delayed_work(&ch->info->deferred_work, 0);
wait_event(ch->frame_end_wait, ch->frame_end);
@@ -624,8 +623,10 @@ static void sh_mobile_lcdc_stop(struct sh_mobile_lcdc_priv *priv)
}
board_cfg = &ch->cfg.board_cfg;
- if (board_cfg->display_off)
+ if (try_module_get(board_cfg->owner) && board_cfg->display_off) {
board_cfg->display_off(board_cfg->board_data);
+ module_put(board_cfg->owner);
+ }
}
/* stop the lcdc */
@@ -704,7 +705,6 @@ static int sh_mobile_lcdc_setup_clocks(struct platform_device *pdev,
return PTR_ERR(priv->dot_clk);
}
}
- atomic_set(&priv->hw_usecnt, -1);
/* Runtime PM support involves two step for this driver:
* 1) Enable Runtime PM
@@ -837,6 +837,102 @@ static int sh_mobile_ioctl(struct fb_info *info, unsigned int cmd,
return retval;
}
+static void sh_mobile_fb_reconfig(struct fb_info *info)
+{
+ struct sh_mobile_lcdc_chan *ch = info->par;
+ struct fb_videomode mode1, mode2;
+ struct fb_event event;
+ int evnt = FB_EVENT_MODE_CHANGE_ALL;
+
+ if (ch->use_count > 1 || (ch->use_count == 1 && !info->fbcon_par))
+ /* More framebuffer users are active */
+ return;
+
+ fb_var_to_videomode(&mode1, &ch->display_var);
+ fb_var_to_videomode(&mode2, &info->var);
+
+ if (fb_mode_is_equal(&mode1, &mode2))
+ return;
+
+ /* Display has been re-plugged, framebuffer is free now, reconfigure */
+ if (fb_set_var(info, &ch->display_var) < 0)
+ /* Couldn't reconfigure, hopefully, can continue as before */
+ return;
+
+ info->fix.line_length = mode2.xres * (ch->cfg.bpp / 8);
+
+ /*
+ * fb_set_var() calls the notifier change internally, only if
+ * FBINFO_MISC_USEREVENT flag is set. Since we do not want to fake a
+ * user event, we have to call the chain ourselves.
+ */
+ event.info = info;
+ event.data = &mode2;
+ fb_notifier_call_chain(evnt, &event);
+}
+
+/*
+ * Locking: both .fb_release() and .fb_open() are called with info->lock held if
+ * user == 1, or with console sem held, if user == 0.
+ */
+static int sh_mobile_release(struct fb_info *info, int user)
+{
+ struct sh_mobile_lcdc_chan *ch = info->par;
+
+ mutex_lock(&ch->open_lock);
+ dev_dbg(info->dev, "%s(): %d users\n", __func__, ch->use_count);
+
+ ch->use_count--;
+
+ /* Nothing to reconfigure, when called from fbcon */
+ if (user) {
+ acquire_console_sem();
+ sh_mobile_fb_reconfig(info);
+ release_console_sem();
+ }
+
+ mutex_unlock(&ch->open_lock);
+
+ return 0;
+}
+
+static int sh_mobile_open(struct fb_info *info, int user)
+{
+ struct sh_mobile_lcdc_chan *ch = info->par;
+
+ mutex_lock(&ch->open_lock);
+ ch->use_count++;
+
+ dev_dbg(info->dev, "%s(): %d users\n", __func__, ch->use_count);
+ mutex_unlock(&ch->open_lock);
+
+ return 0;
+}
+
+static int sh_mobile_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
+{
+ struct sh_mobile_lcdc_chan *ch = info->par;
+
+ if (var->xres < 160 || var->xres > 1920 ||
+ var->yres < 120 || var->yres > 1080 ||
+ var->left_margin < 32 || var->left_margin > 320 ||
+ var->right_margin < 12 || var->right_margin > 240 ||
+ var->upper_margin < 12 || var->upper_margin > 120 ||
+ var->lower_margin < 1 || var->lower_margin > 64 ||
+ var->hsync_len < 32 || var->hsync_len > 240 ||
+ var->vsync_len < 2 || var->vsync_len > 64 ||
+ var->pixclock < 6000 || var->pixclock > 40000 ||
+ var->xres * var->yres * (ch->cfg.bpp / 8) * 2 > info->fix.smem_len) {
+ dev_warn(info->dev, "Invalid info: %u %u %u %u %u %u %u %u %u!\n",
+ var->xres, var->yres,
+ var->left_margin, var->right_margin,
+ var->upper_margin, var->lower_margin,
+ var->hsync_len, var->vsync_len,
+ var->pixclock);
+ return -EINVAL;
+ }
+ return 0;
+}
static struct fb_ops sh_mobile_lcdc_ops = {
.owner = THIS_MODULE,
@@ -848,6 +944,9 @@ static struct fb_ops sh_mobile_lcdc_ops = {
.fb_imageblit = sh_mobile_lcdc_imageblit,
.fb_pan_display = sh_mobile_fb_pan_display,
.fb_ioctl = sh_mobile_ioctl,
+ .fb_open = sh_mobile_open,
+ .fb_release = sh_mobile_release,
+ .fb_check_var = sh_mobile_check_var,
};
static int sh_mobile_lcdc_set_bpp(struct fb_var_screeninfo *var, int bpp)
@@ -958,6 +1057,7 @@ static const struct dev_pm_ops sh_mobile_lcdc_dev_pm_ops = {
.runtime_resume = sh_mobile_lcdc_runtime_resume,
};
+/* locking: called with info->lock held */
static int sh_mobile_lcdc_notify(struct notifier_block *nb,
unsigned long action, void *data)
{
@@ -965,53 +1065,40 @@ static int sh_mobile_lcdc_notify(struct notifier_block *nb,
struct fb_info *info = event->info;
struct sh_mobile_lcdc_chan *ch = info->par;
struct sh_mobile_lcdc_board_cfg *board_cfg = &ch->cfg.board_cfg;
- struct fb_var_screeninfo *var;
+ int ret;
if (&ch->lcdc->notifier != nb)
- return 0;
+ return NOTIFY_DONE;
dev_dbg(info->dev, "%s(): action = %lu, data = %p\n",
__func__, action, event->data);
switch(action) {
case FB_EVENT_SUSPEND:
- if (board_cfg->display_off)
+ if (try_module_get(board_cfg->owner) && board_cfg->display_off) {
board_cfg->display_off(board_cfg->board_data);
+ module_put(board_cfg->owner);
+ }
pm_runtime_put(info->device);
+ sh_mobile_lcdc_stop(ch->lcdc);
break;
case FB_EVENT_RESUME:
- var = &info->var;
+ mutex_lock(&ch->open_lock);
+ sh_mobile_fb_reconfig(info);
+ mutex_unlock(&ch->open_lock);
/* HDMI must be enabled before LCDC configuration */
- if (board_cfg->display_on)
- board_cfg->display_on(board_cfg->board_data, ch->info);
-
- /* Check if the new display is not in our modelist */
- if (ch->info->modelist.next &&
- !fb_match_mode(var, &ch->info->modelist)) {
- struct fb_videomode mode;
- int ret;
-
- /* Can we handle this display? */
- if (var->xres > ch->cfg.lcd_cfg.xres ||
- var->yres > ch->cfg.lcd_cfg.yres)
- return -ENOMEM;
-
- /* Add to the modelist */
- fb_var_to_videomode(&mode, var);
- ret = fb_add_videomode(&mode, &ch->info->modelist);
- if (ret < 0)
- return ret;
+ if (try_module_get(board_cfg->owner) && board_cfg->display_on) {
+ board_cfg->display_on(board_cfg->board_data, info);
+ module_put(board_cfg->owner);
}
- pm_runtime_get_sync(info->device);
-
- sh_mobile_lcdc_geometry(ch);
-
- break;
+ ret = sh_mobile_lcdc_start(ch->lcdc);
+ if (!ret)
+ pm_runtime_get_sync(info->device);
}
- return 0;
+ return NOTIFY_OK;
}
static int sh_mobile_lcdc_remove(struct platform_device *pdev);
@@ -1020,14 +1107,13 @@ static int __devinit sh_mobile_lcdc_probe(struct platform_device *pdev)
{
struct fb_info *info;
struct sh_mobile_lcdc_priv *priv;
- struct sh_mobile_lcdc_info *pdata;
- struct sh_mobile_lcdc_chan_cfg *cfg;
+ struct sh_mobile_lcdc_info *pdata = pdev->dev.platform_data;
struct resource *res;
int error;
void *buf;
int i, j;
- if (!pdev->dev.platform_data) {
+ if (!pdata) {
dev_err(&pdev->dev, "no platform data defined\n");
return -EINVAL;
}
@@ -1055,31 +1141,33 @@ static int __devinit sh_mobile_lcdc_probe(struct platform_device *pdev)
}
priv->irq = i;
- pdata = pdev->dev.platform_data;
+ atomic_set(&priv->hw_usecnt, -1);
j = 0;
for (i = 0; i < ARRAY_SIZE(pdata->ch); i++) {
- priv->ch[j].lcdc = priv;
- memcpy(&priv->ch[j].cfg, &pdata->ch[i], sizeof(pdata->ch[i]));
+ struct sh_mobile_lcdc_chan *ch = priv->ch + j;
+
+ ch->lcdc = priv;
+ memcpy(&ch->cfg, &pdata->ch[i], sizeof(pdata->ch[i]));
- error = sh_mobile_lcdc_check_interface(&priv->ch[j]);
+ error = sh_mobile_lcdc_check_interface(ch);
if (error) {
dev_err(&pdev->dev, "unsupported interface type\n");
goto err1;
}
- init_waitqueue_head(&priv->ch[j].frame_end_wait);
- init_completion(&priv->ch[j].vsync_completion);
- priv->ch[j].pan_offset = 0;
+ init_waitqueue_head(&ch->frame_end_wait);
+ init_completion(&ch->vsync_completion);
+ ch->pan_offset = 0;
switch (pdata->ch[i].chan) {
case LCDC_CHAN_MAINLCD:
- priv->ch[j].enabled = 1 << 1;
- priv->ch[j].reg_offs = lcdc_offs_mainlcd;
+ ch->enabled = 1 << 1;
+ ch->reg_offs = lcdc_offs_mainlcd;
j++;
break;
case LCDC_CHAN_SUBLCD:
- priv->ch[j].enabled = 1 << 2;
- priv->ch[j].reg_offs = lcdc_offs_sublcd;
+ ch->enabled = 1 << 2;
+ ch->reg_offs = lcdc_offs_sublcd;
j++;
break;
}
@@ -1103,69 +1191,83 @@ static int __devinit sh_mobile_lcdc_probe(struct platform_device *pdev)
for (i = 0; i < j; i++) {
struct fb_var_screeninfo *var;
- struct fb_videomode *lcd_cfg;
- cfg = &priv->ch[i].cfg;
+ const struct fb_videomode *lcd_cfg, *max_cfg = NULL;
+ struct sh_mobile_lcdc_chan *ch = priv->ch + i;
+ struct sh_mobile_lcdc_chan_cfg *cfg = &ch->cfg;
+ const struct fb_videomode *mode = cfg->lcd_cfg;
+ unsigned long max_size = 0;
+ int k;
- priv->ch[i].info = framebuffer_alloc(0, &pdev->dev);
- if (!priv->ch[i].info) {
+ ch->info = framebuffer_alloc(0, &pdev->dev);
+ if (!ch->info) {
dev_err(&pdev->dev, "unable to allocate fb_info\n");
error = -ENOMEM;
break;
}
- info = priv->ch[i].info;
+ info = ch->info;
var = &info->var;
- lcd_cfg = &cfg->lcd_cfg;
info->fbops = &sh_mobile_lcdc_ops;
- var->xres = var->xres_virtual = lcd_cfg->xres;
- var->yres = lcd_cfg->yres;
+ info->par = ch;
+
+ mutex_init(&ch->open_lock);
+
+ for (k = 0, lcd_cfg = mode;
+ k < cfg->num_cfg && lcd_cfg;
+ k++, lcd_cfg++) {
+ unsigned long size = lcd_cfg->yres * lcd_cfg->xres;
+
+ if (size > max_size) {
+ max_cfg = lcd_cfg;
+ max_size = size;
+ }
+ }
+
+ if (!mode)
+ max_size = DEFAULT_XRES * DEFAULT_YRES;
+ else if (max_cfg)
+ dev_dbg(&pdev->dev, "Found largest videomode %ux%u\n",
+ max_cfg->xres, max_cfg->yres);
+
+ info->fix = sh_mobile_lcdc_fix;
+ info->fix.smem_len = max_size * (cfg->bpp / 8) * 2;
+
+ if (!mode)
+ mode = &default_720p;
+
+ fb_videomode_to_var(var, mode);
/* Default Y virtual resolution is 2x panel size */
var->yres_virtual = var->yres * 2;
- var->width = cfg->lcd_size_cfg.width;
- var->height = cfg->lcd_size_cfg.height;
var->activate = FB_ACTIVATE_NOW;
- var->left_margin = lcd_cfg->left_margin;
- var->right_margin = lcd_cfg->right_margin;
- var->upper_margin = lcd_cfg->upper_margin;
- var->lower_margin = lcd_cfg->lower_margin;
- var->hsync_len = lcd_cfg->hsync_len;
- var->vsync_len = lcd_cfg->vsync_len;
- var->sync = lcd_cfg->sync;
- var->pixclock = lcd_cfg->pixclock;
error = sh_mobile_lcdc_set_bpp(var, cfg->bpp);
if (error)
break;
- info->fix = sh_mobile_lcdc_fix;
- info->fix.line_length = lcd_cfg->xres * (cfg->bpp / 8);
- info->fix.smem_len = info->fix.line_length *
- var->yres_virtual;
-
buf = dma_alloc_coherent(&pdev->dev, info->fix.smem_len,
- &priv->ch[i].dma_handle, GFP_KERNEL);
+ &ch->dma_handle, GFP_KERNEL);
if (!buf) {
dev_err(&pdev->dev, "unable to allocate buffer\n");
error = -ENOMEM;
break;
}
- info->pseudo_palette = &priv->ch[i].pseudo_palette;
+ info->pseudo_palette = &ch->pseudo_palette;
info->flags = FBINFO_FLAG_DEFAULT;
error = fb_alloc_cmap(&info->cmap, PALETTE_NR, 0);
if (error < 0) {
dev_err(&pdev->dev, "unable to allocate cmap\n");
dma_free_coherent(&pdev->dev, info->fix.smem_len,
- buf, priv->ch[i].dma_handle);
+ buf, ch->dma_handle);
break;
}
- memset(buf, 0, info->fix.smem_len);
- info->fix.smem_start = priv->ch[i].dma_handle;
+ info->fix.smem_start = ch->dma_handle;
+ info->fix.line_length = var->xres * (cfg->bpp / 8);
info->screen_base = buf;
info->device = &pdev->dev;
- info->par = &priv->ch[i];
+ ch->display_var = *var;
}
if (error)
@@ -1179,6 +1281,10 @@ static int __devinit sh_mobile_lcdc_probe(struct platform_device *pdev)
for (i = 0; i < j; i++) {
struct sh_mobile_lcdc_chan *ch = priv->ch + i;
+ const struct fb_videomode *mode = ch->cfg.lcd_cfg;
+
+ if (!mode)
+ mode = &default_720p;
info = ch->info;
@@ -1191,6 +1297,7 @@ static int __devinit sh_mobile_lcdc_probe(struct platform_device *pdev)
}
}
+ fb_videomode_to_modelist(mode, ch->cfg.num_cfg, &info->modelist);
error = register_framebuffer(info);
if (error < 0)
goto err1;
@@ -1200,8 +1307,7 @@ static int __devinit sh_mobile_lcdc_probe(struct platform_device *pdev)
pdev->name,
(ch->cfg.chan == LCDC_CHAN_MAINLCD) ?
"mainlcd" : "sublcd",
- (int) ch->cfg.lcd_cfg.xres,
- (int) ch->cfg.lcd_cfg.yres,
+ info->var.xres, info->var.yres,
ch->cfg.bpp);
/* deferred io mode: disable clock to save power */
diff --git a/drivers/video/sh_mobile_lcdcfb.h b/drivers/video/sh_mobile_lcdcfb.h
new file mode 100644
index 00000000000..9ecee2fba1d
--- /dev/null
+++ b/drivers/video/sh_mobile_lcdcfb.h
@@ -0,0 +1,41 @@
+#ifndef SH_MOBILE_LCDCFB_H
+#define SH_MOBILE_LCDCFB_H
+
+#include <linux/completion.h>
+#include <linux/fb.h>
+#include <linux/mutex.h>
+#include <linux/wait.h>
+
+/* per-channel registers */
+enum { LDDCKPAT1R, LDDCKPAT2R, LDMT1R, LDMT2R, LDMT3R, LDDFR, LDSM1R,
+ LDSM2R, LDSA1R, LDMLSR, LDHCNR, LDHSYNR, LDVLNR, LDVSYNR, LDPMR,
+ LDHAJR,
+ NR_CH_REGS };
+
+#define PALETTE_NR 16
+
+struct sh_mobile_lcdc_priv;
+struct fb_info;
+
+struct sh_mobile_lcdc_chan {
+ struct sh_mobile_lcdc_priv *lcdc;
+ unsigned long *reg_offs;
+ unsigned long ldmt1r_value;
+ unsigned long enabled; /* ME and SE in LDCNT2R */
+ struct sh_mobile_lcdc_chan_cfg cfg;
+ u32 pseudo_palette[PALETTE_NR];
+ unsigned long saved_ch_regs[NR_CH_REGS];
+ struct fb_info *info;
+ dma_addr_t dma_handle;
+ struct fb_deferred_io defio;
+ struct scatterlist *sglist;
+ unsigned long frame_end;
+ unsigned long pan_offset;
+ wait_queue_head_t frame_end_wait;
+ struct completion vsync_completion;
+ struct fb_var_screeninfo display_var;
+ int use_count;
+ struct mutex open_lock; /* protects the use counter */
+};
+
+#endif
diff --git a/fs/btrfs/compression.c b/fs/btrfs/compression.c
index 396039b3a8a..7845d1f7d1d 100644
--- a/fs/btrfs/compression.c
+++ b/fs/btrfs/compression.c
@@ -163,7 +163,6 @@ fail:
*/
static void end_compressed_bio_read(struct bio *bio, int err)
{
- struct extent_io_tree *tree;
struct compressed_bio *cb = bio->bi_private;
struct inode *inode;
struct page *page;
@@ -187,7 +186,6 @@ static void end_compressed_bio_read(struct bio *bio, int err)
/* ok, we're the last bio for this extent, lets start
* the decompression.
*/
- tree = &BTRFS_I(inode)->io_tree;
ret = btrfs_zlib_decompress_biovec(cb->compressed_pages,
cb->start,
cb->orig_bio->bi_io_vec,
diff --git a/fs/btrfs/ctree.c b/fs/btrfs/ctree.c
index c3df14ce2cc..9ac17159925 100644
--- a/fs/btrfs/ctree.c
+++ b/fs/btrfs/ctree.c
@@ -200,7 +200,6 @@ int btrfs_copy_root(struct btrfs_trans_handle *trans,
struct extent_buffer **cow_ret, u64 new_root_objectid)
{
struct extent_buffer *cow;
- u32 nritems;
int ret = 0;
int level;
struct btrfs_disk_key disk_key;
@@ -210,7 +209,6 @@ int btrfs_copy_root(struct btrfs_trans_handle *trans,
WARN_ON(root->ref_cows && trans->transid != root->last_trans);
level = btrfs_header_level(buf);
- nritems = btrfs_header_nritems(buf);
if (level == 0)
btrfs_item_key(buf, &disk_key, 0);
else
@@ -1008,7 +1006,6 @@ static noinline int balance_level(struct btrfs_trans_handle *trans,
int wret;
int pslot;
int orig_slot = path->slots[level];
- int err_on_enospc = 0;
u64 orig_ptr;
if (level == 0)
@@ -1071,8 +1068,7 @@ static noinline int balance_level(struct btrfs_trans_handle *trans,
BTRFS_NODEPTRS_PER_BLOCK(root) / 4)
return 0;
- if (btrfs_header_nritems(mid) < 2)
- err_on_enospc = 1;
+ btrfs_header_nritems(mid);
left = read_node_slot(root, parent, pslot - 1);
if (left) {
@@ -1103,8 +1099,7 @@ static noinline int balance_level(struct btrfs_trans_handle *trans,
wret = push_node_left(trans, root, left, mid, 1);
if (wret < 0)
ret = wret;
- if (btrfs_header_nritems(mid) < 2)
- err_on_enospc = 1;
+ btrfs_header_nritems(mid);
}
/*
@@ -1224,14 +1219,12 @@ static noinline int push_nodes_for_insert(struct btrfs_trans_handle *trans,
int wret;
int pslot;
int orig_slot = path->slots[level];
- u64 orig_ptr;
if (level == 0)
return 1;
mid = path->nodes[level];
WARN_ON(btrfs_header_generation(mid) != trans->transid);
- orig_ptr = btrfs_node_blockptr(mid, orig_slot);
if (level < BTRFS_MAX_LEVEL - 1)
parent = path->nodes[level + 1];
@@ -1577,13 +1570,33 @@ read_block_for_search(struct btrfs_trans_handle *trans,
blocksize = btrfs_level_size(root, level - 1);
tmp = btrfs_find_tree_block(root, blocknr, blocksize);
- if (tmp && btrfs_buffer_uptodate(tmp, gen)) {
- /*
- * we found an up to date block without sleeping, return
- * right away
- */
- *eb_ret = tmp;
- return 0;
+ if (tmp) {
+ if (btrfs_buffer_uptodate(tmp, 0)) {
+ if (btrfs_buffer_uptodate(tmp, gen)) {
+ /*
+ * we found an up to date block without
+ * sleeping, return
+ * right away
+ */
+ *eb_ret = tmp;
+ return 0;
+ }
+ /* the pages were up to date, but we failed
+ * the generation number check. Do a full
+ * read for the generation number that is correct.
+ * We must do this without dropping locks so
+ * we can trust our generation number
+ */
+ free_extent_buffer(tmp);
+ tmp = read_tree_block(root, blocknr, blocksize, gen);
+ if (tmp && btrfs_buffer_uptodate(tmp, gen)) {
+ *eb_ret = tmp;
+ return 0;
+ }
+ free_extent_buffer(tmp);
+ btrfs_release_path(NULL, p);
+ return -EIO;
+ }
}
/*
@@ -1596,8 +1609,7 @@ read_block_for_search(struct btrfs_trans_handle *trans,
btrfs_unlock_up_safe(p, level + 1);
btrfs_set_path_blocking(p);
- if (tmp)
- free_extent_buffer(tmp);
+ free_extent_buffer(tmp);
if (p->reada)
reada_for_search(root, p, level, slot, key->objectid);
@@ -2548,7 +2560,6 @@ static noinline int __push_leaf_left(struct btrfs_trans_handle *trans,
{
struct btrfs_disk_key disk_key;
struct extent_buffer *right = path->nodes[0];
- int slot;
int i;
int push_space = 0;
int push_items = 0;
@@ -2560,8 +2571,6 @@ static noinline int __push_leaf_left(struct btrfs_trans_handle *trans,
u32 this_item_size;
u32 old_left_item_size;
- slot = path->slots[1];
-
if (empty)
nr = min(right_nritems, max_slot);
else
@@ -3330,7 +3339,6 @@ int btrfs_truncate_item(struct btrfs_trans_handle *trans,
{
int ret = 0;
int slot;
- int slot_orig;
struct extent_buffer *leaf;
struct btrfs_item *item;
u32 nritems;
@@ -3340,7 +3348,6 @@ int btrfs_truncate_item(struct btrfs_trans_handle *trans,
unsigned int size_diff;
int i;
- slot_orig = path->slots[0];
leaf = path->nodes[0];
slot = path->slots[0];
@@ -3445,7 +3452,6 @@ int btrfs_extend_item(struct btrfs_trans_handle *trans,
{
int ret = 0;
int slot;
- int slot_orig;
struct extent_buffer *leaf;
struct btrfs_item *item;
u32 nritems;
@@ -3454,7 +3460,6 @@ int btrfs_extend_item(struct btrfs_trans_handle *trans,
unsigned int old_size;
int i;
- slot_orig = path->slots[0];
leaf = path->nodes[0];
nritems = btrfs_header_nritems(leaf);
@@ -3787,7 +3792,6 @@ int btrfs_insert_empty_items(struct btrfs_trans_handle *trans,
struct btrfs_key *cpu_key, u32 *data_size,
int nr)
{
- struct extent_buffer *leaf;
int ret = 0;
int slot;
int i;
@@ -3804,7 +3808,6 @@ int btrfs_insert_empty_items(struct btrfs_trans_handle *trans,
if (ret < 0)
goto out;
- leaf = path->nodes[0];
slot = path->slots[0];
BUG_ON(slot < 0);
diff --git a/fs/btrfs/ctree.h b/fs/btrfs/ctree.h
index eaf286abad1..8db9234f6b4 100644
--- a/fs/btrfs/ctree.h
+++ b/fs/btrfs/ctree.h
@@ -99,6 +99,9 @@ struct btrfs_ordered_sum;
*/
#define BTRFS_EXTENT_CSUM_OBJECTID -10ULL
+/* For storing free space cache */
+#define BTRFS_FREE_SPACE_OBJECTID -11ULL
+
/* dummy objectid represents multiple objectids */
#define BTRFS_MULTIPLE_OBJECTIDS -255ULL
@@ -265,6 +268,22 @@ struct btrfs_chunk {
/* additional stripes go here */
} __attribute__ ((__packed__));
+#define BTRFS_FREE_SPACE_EXTENT 1
+#define BTRFS_FREE_SPACE_BITMAP 2
+
+struct btrfs_free_space_entry {
+ __le64 offset;
+ __le64 bytes;
+ u8 type;
+} __attribute__ ((__packed__));
+
+struct btrfs_free_space_header {
+ struct btrfs_disk_key location;
+ __le64 generation;
+ __le64 num_entries;
+ __le64 num_bitmaps;
+} __attribute__ ((__packed__));
+
static inline unsigned long btrfs_chunk_item_size(int num_stripes)
{
BUG_ON(num_stripes == 0);
@@ -365,8 +384,10 @@ struct btrfs_super_block {
char label[BTRFS_LABEL_SIZE];
+ __le64 cache_generation;
+
/* future expansion */
- __le64 reserved[32];
+ __le64 reserved[31];
u8 sys_chunk_array[BTRFS_SYSTEM_CHUNK_ARRAY_SIZE];
} __attribute__ ((__packed__));
@@ -375,13 +396,15 @@ struct btrfs_super_block {
* ones specified below then we will fail to mount
*/
#define BTRFS_FEATURE_INCOMPAT_MIXED_BACKREF (1ULL << 0)
-#define BTRFS_FEATURE_INCOMPAT_DEFAULT_SUBVOL (2ULL << 0)
+#define BTRFS_FEATURE_INCOMPAT_DEFAULT_SUBVOL (1ULL << 1)
+#define BTRFS_FEATURE_INCOMPAT_MIXED_GROUPS (1ULL << 2)
#define BTRFS_FEATURE_COMPAT_SUPP 0ULL
#define BTRFS_FEATURE_COMPAT_RO_SUPP 0ULL
-#define BTRFS_FEATURE_INCOMPAT_SUPP \
- (BTRFS_FEATURE_INCOMPAT_MIXED_BACKREF | \
- BTRFS_FEATURE_INCOMPAT_DEFAULT_SUBVOL)
+#define BTRFS_FEATURE_INCOMPAT_SUPP \
+ (BTRFS_FEATURE_INCOMPAT_MIXED_BACKREF | \
+ BTRFS_FEATURE_INCOMPAT_DEFAULT_SUBVOL | \
+ BTRFS_FEATURE_INCOMPAT_MIXED_GROUPS)
/*
* A leaf is full of items. offset and size tell us where to find
@@ -675,7 +698,8 @@ struct btrfs_block_group_item {
struct btrfs_space_info {
u64 flags;
- u64 total_bytes; /* total bytes in the space */
+ u64 total_bytes; /* total bytes in the space,
+ this doesn't take mirrors into account */
u64 bytes_used; /* total bytes used,
this does't take mirrors into account */
u64 bytes_pinned; /* total bytes pinned, will be freed when the
@@ -687,6 +711,8 @@ struct btrfs_space_info {
u64 bytes_may_use; /* number of bytes that may be used for
delalloc/allocations */
u64 disk_used; /* total bytes used on disk */
+ u64 disk_total; /* total bytes on disk, takes mirrors into
+ account */
int full; /* indicates that we cannot allocate any more
chunks for this space */
@@ -750,6 +776,14 @@ enum btrfs_caching_type {
BTRFS_CACHE_FINISHED = 2,
};
+enum btrfs_disk_cache_state {
+ BTRFS_DC_WRITTEN = 0,
+ BTRFS_DC_ERROR = 1,
+ BTRFS_DC_CLEAR = 2,
+ BTRFS_DC_SETUP = 3,
+ BTRFS_DC_NEED_WRITE = 4,
+};
+
struct btrfs_caching_control {
struct list_head list;
struct mutex mutex;
@@ -763,6 +797,7 @@ struct btrfs_block_group_cache {
struct btrfs_key key;
struct btrfs_block_group_item item;
struct btrfs_fs_info *fs_info;
+ struct inode *inode;
spinlock_t lock;
u64 pinned;
u64 reserved;
@@ -773,8 +808,11 @@ struct btrfs_block_group_cache {
int extents_thresh;
int free_extents;
int total_bitmaps;
- int ro;
- int dirty;
+ int ro:1;
+ int dirty:1;
+ int iref:1;
+
+ int disk_cache_state;
/* cache tracking stuff */
int cached;
@@ -863,6 +901,7 @@ struct btrfs_fs_info {
struct btrfs_transaction *running_transaction;
wait_queue_head_t transaction_throttle;
wait_queue_head_t transaction_wait;
+ wait_queue_head_t transaction_blocked_wait;
wait_queue_head_t async_submit_wait;
struct btrfs_super_block super_copy;
@@ -949,6 +988,7 @@ struct btrfs_fs_info {
struct btrfs_workers endio_meta_workers;
struct btrfs_workers endio_meta_write_workers;
struct btrfs_workers endio_write_workers;
+ struct btrfs_workers endio_freespace_worker;
struct btrfs_workers submit_workers;
/*
* fixup workers take dirty pages that didn't properly go through
@@ -1192,6 +1232,9 @@ struct btrfs_root {
#define BTRFS_MOUNT_NOSSD (1 << 9)
#define BTRFS_MOUNT_DISCARD (1 << 10)
#define BTRFS_MOUNT_FORCE_COMPRESS (1 << 11)
+#define BTRFS_MOUNT_SPACE_CACHE (1 << 12)
+#define BTRFS_MOUNT_CLEAR_CACHE (1 << 13)
+#define BTRFS_MOUNT_USER_SUBVOL_RM_ALLOWED (1 << 14)
#define btrfs_clear_opt(o, opt) ((o) &= ~BTRFS_MOUNT_##opt)
#define btrfs_set_opt(o, opt) ((o) |= BTRFS_MOUNT_##opt)
@@ -1665,6 +1708,27 @@ static inline void btrfs_set_dir_item_key(struct extent_buffer *eb,
write_eb_member(eb, item, struct btrfs_dir_item, location, key);
}
+BTRFS_SETGET_FUNCS(free_space_entries, struct btrfs_free_space_header,
+ num_entries, 64);
+BTRFS_SETGET_FUNCS(free_space_bitmaps, struct btrfs_free_space_header,
+ num_bitmaps, 64);
+BTRFS_SETGET_FUNCS(free_space_generation, struct btrfs_free_space_header,
+ generation, 64);
+
+static inline void btrfs_free_space_key(struct extent_buffer *eb,
+ struct btrfs_free_space_header *h,
+ struct btrfs_disk_key *key)
+{
+ read_eb_member(eb, h, struct btrfs_free_space_header, location, key);
+}
+
+static inline void btrfs_set_free_space_key(struct extent_buffer *eb,
+ struct btrfs_free_space_header *h,
+ struct btrfs_disk_key *key)
+{
+ write_eb_member(eb, h, struct btrfs_free_space_header, location, key);
+}
+
/* struct btrfs_disk_key */
BTRFS_SETGET_STACK_FUNCS(disk_key_objectid, struct btrfs_disk_key,
objectid, 64);
@@ -1876,6 +1940,8 @@ BTRFS_SETGET_STACK_FUNCS(super_incompat_flags, struct btrfs_super_block,
incompat_flags, 64);
BTRFS_SETGET_STACK_FUNCS(super_csum_type, struct btrfs_super_block,
csum_type, 16);
+BTRFS_SETGET_STACK_FUNCS(super_cache_generation, struct btrfs_super_block,
+ cache_generation, 64);
static inline int btrfs_super_csum_size(struct btrfs_super_block *s)
{
@@ -1988,6 +2054,12 @@ static inline struct dentry *fdentry(struct file *file)
return file->f_path.dentry;
}
+static inline bool btrfs_mixed_space_info(struct btrfs_space_info *space_info)
+{
+ return ((space_info->flags & BTRFS_BLOCK_GROUP_METADATA) &&
+ (space_info->flags & BTRFS_BLOCK_GROUP_DATA));
+}
+
/* extent-tree.c */
void btrfs_put_block_group(struct btrfs_block_group_cache *cache);
int btrfs_run_delayed_refs(struct btrfs_trans_handle *trans,
@@ -2079,7 +2151,7 @@ int btrfs_check_data_free_space(struct inode *inode, u64 bytes);
void btrfs_free_reserved_data_space(struct inode *inode, u64 bytes);
int btrfs_trans_reserve_metadata(struct btrfs_trans_handle *trans,
struct btrfs_root *root,
- int num_items, int *retries);
+ int num_items);
void btrfs_trans_release_metadata(struct btrfs_trans_handle *trans,
struct btrfs_root *root);
int btrfs_orphan_reserve_metadata(struct btrfs_trans_handle *trans,
@@ -2100,7 +2172,7 @@ void btrfs_add_durable_block_rsv(struct btrfs_fs_info *fs_info,
int btrfs_block_rsv_add(struct btrfs_trans_handle *trans,
struct btrfs_root *root,
struct btrfs_block_rsv *block_rsv,
- u64 num_bytes, int *retries);
+ u64 num_bytes);
int btrfs_block_rsv_check(struct btrfs_trans_handle *trans,
struct btrfs_root *root,
struct btrfs_block_rsv *block_rsv,
@@ -2115,6 +2187,7 @@ int btrfs_set_block_group_ro(struct btrfs_root *root,
struct btrfs_block_group_cache *cache);
int btrfs_set_block_group_rw(struct btrfs_root *root,
struct btrfs_block_group_cache *cache);
+void btrfs_put_block_group_cache(struct btrfs_fs_info *info);
/* ctree.c */
int btrfs_bin_search(struct extent_buffer *eb, struct btrfs_key *key,
int level, int *slot);
@@ -2373,7 +2446,8 @@ int btrfs_truncate_inode_items(struct btrfs_trans_handle *trans,
u32 min_type);
int btrfs_start_delalloc_inodes(struct btrfs_root *root, int delay_iput);
-int btrfs_start_one_delalloc_inode(struct btrfs_root *root, int delay_iput);
+int btrfs_start_one_delalloc_inode(struct btrfs_root *root, int delay_iput,
+ int sync);
int btrfs_set_extent_delalloc(struct inode *inode, u64 start, u64 end,
struct extent_state **cached_state);
int btrfs_writepages(struct address_space *mapping,
@@ -2426,6 +2500,10 @@ void btrfs_run_delayed_iputs(struct btrfs_root *root);
int btrfs_prealloc_file_range(struct inode *inode, int mode,
u64 start, u64 num_bytes, u64 min_size,
loff_t actual_len, u64 *alloc_hint);
+int btrfs_prealloc_file_range_trans(struct inode *inode,
+ struct btrfs_trans_handle *trans, int mode,
+ u64 start, u64 num_bytes, u64 min_size,
+ loff_t actual_len, u64 *alloc_hint);
extern const struct dentry_operations btrfs_dentry_operations;
/* ioctl.c */
diff --git a/fs/btrfs/dir-item.c b/fs/btrfs/dir-item.c
index e9103b3baa4..f0cad5ae5be 100644
--- a/fs/btrfs/dir-item.c
+++ b/fs/btrfs/dir-item.c
@@ -427,5 +427,5 @@ int btrfs_delete_one_dir_name(struct btrfs_trans_handle *trans,
ret = btrfs_truncate_item(trans, root, path,
item_len - sub_item_len, 1);
}
- return 0;
+ return ret;
}
diff --git a/fs/btrfs/disk-io.c b/fs/btrfs/disk-io.c
index 5e789f4a3ed..fb827d0d718 100644
--- a/fs/btrfs/disk-io.c
+++ b/fs/btrfs/disk-io.c
@@ -338,7 +338,6 @@ static int csum_dirty_buffer(struct btrfs_root *root, struct page *page)
struct extent_io_tree *tree;
u64 start = (u64)page->index << PAGE_CACHE_SHIFT;
u64 found_start;
- int found_level;
unsigned long len;
struct extent_buffer *eb;
int ret;
@@ -369,8 +368,6 @@ static int csum_dirty_buffer(struct btrfs_root *root, struct page *page)
WARN_ON(1);
goto err;
}
- found_level = btrfs_header_level(eb);
-
csum_tree_block(root, eb, 0);
err:
free_extent_buffer(eb);
@@ -481,9 +478,12 @@ static void end_workqueue_bio(struct bio *bio, int err)
end_io_wq->work.flags = 0;
if (bio->bi_rw & REQ_WRITE) {
- if (end_io_wq->metadata)
+ if (end_io_wq->metadata == 1)
btrfs_queue_worker(&fs_info->endio_meta_write_workers,
&end_io_wq->work);
+ else if (end_io_wq->metadata == 2)
+ btrfs_queue_worker(&fs_info->endio_freespace_worker,
+ &end_io_wq->work);
else
btrfs_queue_worker(&fs_info->endio_write_workers,
&end_io_wq->work);
@@ -497,6 +497,13 @@ static void end_workqueue_bio(struct bio *bio, int err)
}
}
+/*
+ * For the metadata arg you want
+ *
+ * 0 - if data
+ * 1 - if normal metadta
+ * 2 - if writing to the free space cache area
+ */
int btrfs_bio_wq_end_io(struct btrfs_fs_info *info, struct bio *bio,
int metadata)
{
@@ -533,11 +540,9 @@ int btrfs_congested_async(struct btrfs_fs_info *info, int iodone)
static void run_one_async_start(struct btrfs_work *work)
{
- struct btrfs_fs_info *fs_info;
struct async_submit_bio *async;
async = container_of(work, struct async_submit_bio, work);
- fs_info = BTRFS_I(async->inode)->root->fs_info;
async->submit_bio_start(async->inode, async->rw, async->bio,
async->mirror_num, async->bio_flags,
async->bio_offset);
@@ -850,12 +855,8 @@ struct extent_buffer *read_tree_block(struct btrfs_root *root, u64 bytenr,
u32 blocksize, u64 parent_transid)
{
struct extent_buffer *buf = NULL;
- struct inode *btree_inode = root->fs_info->btree_inode;
- struct extent_io_tree *io_tree;
int ret;
- io_tree = &BTRFS_I(btree_inode)->io_tree;
-
buf = btrfs_find_create_tree_block(root, bytenr, blocksize);
if (!buf)
return NULL;
@@ -1377,7 +1378,6 @@ static int bio_ready_for_csum(struct bio *bio)
u64 start = 0;
struct page *page;
struct extent_io_tree *io_tree = NULL;
- struct btrfs_fs_info *info = NULL;
struct bio_vec *bvec;
int i;
int ret;
@@ -1396,7 +1396,6 @@ static int bio_ready_for_csum(struct bio *bio)
buf_len = page->private >> 2;
start = page_offset(page) + bvec->bv_offset;
io_tree = &BTRFS_I(page->mapping->host)->io_tree;
- info = BTRFS_I(page->mapping->host)->root->fs_info;
}
/* are we fully contained in this bio? */
if (buf_len <= length)
@@ -1680,12 +1679,12 @@ struct btrfs_root *open_ctree(struct super_block *sb,
init_waitqueue_head(&fs_info->transaction_throttle);
init_waitqueue_head(&fs_info->transaction_wait);
+ init_waitqueue_head(&fs_info->transaction_blocked_wait);
init_waitqueue_head(&fs_info->async_submit_wait);
__setup_root(4096, 4096, 4096, 4096, tree_root,
fs_info, BTRFS_ROOT_TREE_OBJECTID);
-
bh = btrfs_read_dev_super(fs_devices->latest_bdev);
if (!bh)
goto fail_iput;
@@ -1775,6 +1774,8 @@ struct btrfs_root *open_ctree(struct super_block *sb,
btrfs_init_workers(&fs_info->endio_write_workers, "endio-write",
fs_info->thread_pool_size,
&fs_info->generic_worker);
+ btrfs_init_workers(&fs_info->endio_freespace_worker, "freespace-write",
+ 1, &fs_info->generic_worker);
/*
* endios are largely parallel and should have a very
@@ -1795,6 +1796,7 @@ struct btrfs_root *open_ctree(struct super_block *sb,
btrfs_start_workers(&fs_info->endio_meta_workers, 1);
btrfs_start_workers(&fs_info->endio_meta_write_workers, 1);
btrfs_start_workers(&fs_info->endio_write_workers, 1);
+ btrfs_start_workers(&fs_info->endio_freespace_worker, 1);
fs_info->bdi.ra_pages *= btrfs_super_num_devices(disk_super);
fs_info->bdi.ra_pages = max(fs_info->bdi.ra_pages,
@@ -1993,6 +1995,7 @@ struct btrfs_root *open_ctree(struct super_block *sb,
if (!(sb->s_flags & MS_RDONLY)) {
down_read(&fs_info->cleanup_work_sem);
btrfs_orphan_cleanup(fs_info->fs_root);
+ btrfs_orphan_cleanup(fs_info->tree_root);
up_read(&fs_info->cleanup_work_sem);
}
@@ -2035,6 +2038,7 @@ fail_sb_buffer:
btrfs_stop_workers(&fs_info->endio_meta_workers);
btrfs_stop_workers(&fs_info->endio_meta_write_workers);
btrfs_stop_workers(&fs_info->endio_write_workers);
+ btrfs_stop_workers(&fs_info->endio_freespace_worker);
btrfs_stop_workers(&fs_info->submit_workers);
fail_iput:
invalidate_inode_pages2(fs_info->btree_inode->i_mapping);
@@ -2410,6 +2414,7 @@ int close_ctree(struct btrfs_root *root)
fs_info->closing = 1;
smp_mb();
+ btrfs_put_block_group_cache(fs_info);
if (!(fs_info->sb->s_flags & MS_RDONLY)) {
ret = btrfs_commit_super(root);
if (ret)
@@ -2456,6 +2461,7 @@ int close_ctree(struct btrfs_root *root)
btrfs_stop_workers(&fs_info->endio_meta_workers);
btrfs_stop_workers(&fs_info->endio_meta_write_workers);
btrfs_stop_workers(&fs_info->endio_write_workers);
+ btrfs_stop_workers(&fs_info->endio_freespace_worker);
btrfs_stop_workers(&fs_info->submit_workers);
btrfs_close_devices(fs_info->fs_devices);
diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c
index 0b81ecdb101..0c097f3aec4 100644
--- a/fs/btrfs/extent-tree.c
+++ b/fs/btrfs/extent-tree.c
@@ -242,6 +242,12 @@ get_caching_control(struct btrfs_block_group_cache *cache)
return NULL;
}
+ /* We're loading it the fast way, so we don't have a caching_ctl. */
+ if (!cache->caching_ctl) {
+ spin_unlock(&cache->lock);
+ return NULL;
+ }
+
ctl = cache->caching_ctl;
atomic_inc(&ctl->count);
spin_unlock(&cache->lock);
@@ -421,7 +427,9 @@ err:
return 0;
}
-static int cache_block_group(struct btrfs_block_group_cache *cache)
+static int cache_block_group(struct btrfs_block_group_cache *cache,
+ struct btrfs_trans_handle *trans,
+ int load_cache_only)
{
struct btrfs_fs_info *fs_info = cache->fs_info;
struct btrfs_caching_control *caching_ctl;
@@ -432,6 +440,36 @@ static int cache_block_group(struct btrfs_block_group_cache *cache)
if (cache->cached != BTRFS_CACHE_NO)
return 0;
+ /*
+ * We can't do the read from on-disk cache during a commit since we need
+ * to have the normal tree locking.
+ */
+ if (!trans->transaction->in_commit) {
+ spin_lock(&cache->lock);
+ if (cache->cached != BTRFS_CACHE_NO) {
+ spin_unlock(&cache->lock);
+ return 0;
+ }
+ cache->cached = BTRFS_CACHE_STARTED;
+ spin_unlock(&cache->lock);
+
+ ret = load_free_space_cache(fs_info, cache);
+
+ spin_lock(&cache->lock);
+ if (ret == 1) {
+ cache->cached = BTRFS_CACHE_FINISHED;
+ cache->last_byte_to_unpin = (u64)-1;
+ } else {
+ cache->cached = BTRFS_CACHE_NO;
+ }
+ spin_unlock(&cache->lock);
+ if (ret == 1)
+ return 0;
+ }
+
+ if (load_cache_only)
+ return 0;
+
caching_ctl = kzalloc(sizeof(*caching_ctl), GFP_KERNEL);
BUG_ON(!caching_ctl);
@@ -509,7 +547,7 @@ static struct btrfs_space_info *__find_space_info(struct btrfs_fs_info *info,
rcu_read_lock();
list_for_each_entry_rcu(found, head, list) {
- if (found->flags == flags) {
+ if (found->flags & flags) {
rcu_read_unlock();
return found;
}
@@ -542,6 +580,15 @@ static u64 div_factor(u64 num, int factor)
return num;
}
+static u64 div_factor_fine(u64 num, int factor)
+{
+ if (factor == 100)
+ return num;
+ num *= factor;
+ do_div(num, 100);
+ return num;
+}
+
u64 btrfs_find_block_group(struct btrfs_root *root,
u64 search_start, u64 search_hint, int owner)
{
@@ -2687,6 +2734,109 @@ next_block_group(struct btrfs_root *root,
return cache;
}
+static int cache_save_setup(struct btrfs_block_group_cache *block_group,
+ struct btrfs_trans_handle *trans,
+ struct btrfs_path *path)
+{
+ struct btrfs_root *root = block_group->fs_info->tree_root;
+ struct inode *inode = NULL;
+ u64 alloc_hint = 0;
+ int num_pages = 0;
+ int retries = 0;
+ int ret = 0;
+
+ /*
+ * If this block group is smaller than 100 megs don't bother caching the
+ * block group.
+ */
+ if (block_group->key.offset < (100 * 1024 * 1024)) {
+ spin_lock(&block_group->lock);
+ block_group->disk_cache_state = BTRFS_DC_WRITTEN;
+ spin_unlock(&block_group->lock);
+ return 0;
+ }
+
+again:
+ inode = lookup_free_space_inode(root, block_group, path);
+ if (IS_ERR(inode) && PTR_ERR(inode) != -ENOENT) {
+ ret = PTR_ERR(inode);
+ btrfs_release_path(root, path);
+ goto out;
+ }
+
+ if (IS_ERR(inode)) {
+ BUG_ON(retries);
+ retries++;
+
+ if (block_group->ro)
+ goto out_free;
+
+ ret = create_free_space_inode(root, trans, block_group, path);
+ if (ret)
+ goto out_free;
+ goto again;
+ }
+
+ /*
+ * We want to set the generation to 0, that way if anything goes wrong
+ * from here on out we know not to trust this cache when we load up next
+ * time.
+ */
+ BTRFS_I(inode)->generation = 0;
+ ret = btrfs_update_inode(trans, root, inode);
+ WARN_ON(ret);
+
+ if (i_size_read(inode) > 0) {
+ ret = btrfs_truncate_free_space_cache(root, trans, path,
+ inode);
+ if (ret)
+ goto out_put;
+ }
+
+ spin_lock(&block_group->lock);
+ if (block_group->cached != BTRFS_CACHE_FINISHED) {
+ spin_unlock(&block_group->lock);
+ goto out_put;
+ }
+ spin_unlock(&block_group->lock);
+
+ num_pages = (int)div64_u64(block_group->key.offset, 1024 * 1024 * 1024);
+ if (!num_pages)
+ num_pages = 1;
+
+ /*
+ * Just to make absolutely sure we have enough space, we're going to
+ * preallocate 12 pages worth of space for each block group. In
+ * practice we ought to use at most 8, but we need extra space so we can
+ * add our header and have a terminator between the extents and the
+ * bitmaps.
+ */
+ num_pages *= 16;
+ num_pages *= PAGE_CACHE_SIZE;
+
+ ret = btrfs_check_data_free_space(inode, num_pages);
+ if (ret)
+ goto out_put;
+
+ ret = btrfs_prealloc_file_range_trans(inode, trans, 0, 0, num_pages,
+ num_pages, num_pages,
+ &alloc_hint);
+ btrfs_free_reserved_data_space(inode, num_pages);
+out_put:
+ iput(inode);
+out_free:
+ btrfs_release_path(root, path);
+out:
+ spin_lock(&block_group->lock);
+ if (ret)
+ block_group->disk_cache_state = BTRFS_DC_ERROR;
+ else
+ block_group->disk_cache_state = BTRFS_DC_SETUP;
+ spin_unlock(&block_group->lock);
+
+ return ret;
+}
+
int btrfs_write_dirty_block_groups(struct btrfs_trans_handle *trans,
struct btrfs_root *root)
{
@@ -2699,6 +2849,25 @@ int btrfs_write_dirty_block_groups(struct btrfs_trans_handle *trans,
if (!path)
return -ENOMEM;
+again:
+ while (1) {
+ cache = btrfs_lookup_first_block_group(root->fs_info, last);
+ while (cache) {
+ if (cache->disk_cache_state == BTRFS_DC_CLEAR)
+ break;
+ cache = next_block_group(root, cache);
+ }
+ if (!cache) {
+ if (last == 0)
+ break;
+ last = 0;
+ continue;
+ }
+ err = cache_save_setup(cache, trans, path);
+ last = cache->key.objectid + cache->key.offset;
+ btrfs_put_block_group(cache);
+ }
+
while (1) {
if (last == 0) {
err = btrfs_run_delayed_refs(trans, root,
@@ -2708,6 +2877,11 @@ int btrfs_write_dirty_block_groups(struct btrfs_trans_handle *trans,
cache = btrfs_lookup_first_block_group(root->fs_info, last);
while (cache) {
+ if (cache->disk_cache_state == BTRFS_DC_CLEAR) {
+ btrfs_put_block_group(cache);
+ goto again;
+ }
+
if (cache->dirty)
break;
cache = next_block_group(root, cache);
@@ -2719,6 +2893,8 @@ int btrfs_write_dirty_block_groups(struct btrfs_trans_handle *trans,
continue;
}
+ if (cache->disk_cache_state == BTRFS_DC_SETUP)
+ cache->disk_cache_state = BTRFS_DC_NEED_WRITE;
cache->dirty = 0;
last = cache->key.objectid + cache->key.offset;
@@ -2727,6 +2903,52 @@ int btrfs_write_dirty_block_groups(struct btrfs_trans_handle *trans,
btrfs_put_block_group(cache);
}
+ while (1) {
+ /*
+ * I don't think this is needed since we're just marking our
+ * preallocated extent as written, but just in case it can't
+ * hurt.
+ */
+ if (last == 0) {
+ err = btrfs_run_delayed_refs(trans, root,
+ (unsigned long)-1);
+ BUG_ON(err);
+ }
+
+ cache = btrfs_lookup_first_block_group(root->fs_info, last);
+ while (cache) {
+ /*
+ * Really this shouldn't happen, but it could if we
+ * couldn't write the entire preallocated extent and
+ * splitting the extent resulted in a new block.
+ */
+ if (cache->dirty) {
+ btrfs_put_block_group(cache);
+ goto again;
+ }
+ if (cache->disk_cache_state == BTRFS_DC_NEED_WRITE)
+ break;
+ cache = next_block_group(root, cache);
+ }
+ if (!cache) {
+ if (last == 0)
+ break;
+ last = 0;
+ continue;
+ }
+
+ btrfs_write_out_cache(root, trans, cache, path);
+
+ /*
+ * If we didn't have an error then the cache state is still
+ * NEED_WRITE, so we can set it to WRITTEN.
+ */
+ if (cache->disk_cache_state == BTRFS_DC_NEED_WRITE)
+ cache->disk_cache_state = BTRFS_DC_WRITTEN;
+ last = cache->key.objectid + cache->key.offset;
+ btrfs_put_block_group(cache);
+ }
+
btrfs_free_path(path);
return 0;
}
@@ -2762,6 +2984,7 @@ static int update_space_info(struct btrfs_fs_info *info, u64 flags,
if (found) {
spin_lock(&found->lock);
found->total_bytes += total_bytes;
+ found->disk_total += total_bytes * factor;
found->bytes_used += bytes_used;
found->disk_used += bytes_used * factor;
found->full = 0;
@@ -2781,6 +3004,7 @@ static int update_space_info(struct btrfs_fs_info *info, u64 flags,
BTRFS_BLOCK_GROUP_SYSTEM |
BTRFS_BLOCK_GROUP_METADATA);
found->total_bytes = total_bytes;
+ found->disk_total = total_bytes * factor;
found->bytes_used = bytes_used;
found->disk_used = bytes_used * factor;
found->bytes_pinned = 0;
@@ -2882,11 +3106,16 @@ int btrfs_check_data_free_space(struct inode *inode, u64 bytes)
struct btrfs_space_info *data_sinfo;
struct btrfs_root *root = BTRFS_I(inode)->root;
u64 used;
- int ret = 0, committed = 0;
+ int ret = 0, committed = 0, alloc_chunk = 1;
/* make sure bytes are sectorsize aligned */
bytes = (bytes + root->sectorsize - 1) & ~((u64)root->sectorsize - 1);
+ if (root == root->fs_info->tree_root) {
+ alloc_chunk = 0;
+ committed = 1;
+ }
+
data_sinfo = BTRFS_I(inode)->space_info;
if (!data_sinfo)
goto alloc;
@@ -2905,7 +3134,7 @@ again:
* if we don't have enough free bytes in this space then we need
* to alloc a new chunk.
*/
- if (!data_sinfo->full) {
+ if (!data_sinfo->full && alloc_chunk) {
u64 alloc_target;
data_sinfo->force_alloc = 1;
@@ -2997,10 +3226,11 @@ static void force_metadata_allocation(struct btrfs_fs_info *info)
rcu_read_unlock();
}
-static int should_alloc_chunk(struct btrfs_space_info *sinfo,
- u64 alloc_bytes)
+static int should_alloc_chunk(struct btrfs_root *root,
+ struct btrfs_space_info *sinfo, u64 alloc_bytes)
{
u64 num_bytes = sinfo->total_bytes - sinfo->bytes_readonly;
+ u64 thresh;
if (sinfo->bytes_used + sinfo->bytes_reserved +
alloc_bytes + 256 * 1024 * 1024 < num_bytes)
@@ -3010,6 +3240,12 @@ static int should_alloc_chunk(struct btrfs_space_info *sinfo,
alloc_bytes < div_factor(num_bytes, 8))
return 0;
+ thresh = btrfs_super_total_bytes(&root->fs_info->super_copy);
+ thresh = max_t(u64, 256 * 1024 * 1024, div_factor_fine(thresh, 5));
+
+ if (num_bytes > thresh && sinfo->bytes_used < div_factor(num_bytes, 3))
+ return 0;
+
return 1;
}
@@ -3041,13 +3277,21 @@ static int do_chunk_alloc(struct btrfs_trans_handle *trans,
goto out;
}
- if (!force && !should_alloc_chunk(space_info, alloc_bytes)) {
+ if (!force && !should_alloc_chunk(extent_root, space_info,
+ alloc_bytes)) {
spin_unlock(&space_info->lock);
goto out;
}
spin_unlock(&space_info->lock);
/*
+ * If we have mixed data/metadata chunks we want to make sure we keep
+ * allocating mixed chunks instead of individual chunks.
+ */
+ if (btrfs_mixed_space_info(space_info))
+ flags |= (BTRFS_BLOCK_GROUP_DATA | BTRFS_BLOCK_GROUP_METADATA);
+
+ /*
* if we're doing a data chunk, go ahead and make sure that
* we keep a reasonable number of metadata chunks allocated in the
* FS as well.
@@ -3072,55 +3316,25 @@ out:
return ret;
}
-static int maybe_allocate_chunk(struct btrfs_trans_handle *trans,
- struct btrfs_root *root,
- struct btrfs_space_info *sinfo, u64 num_bytes)
-{
- int ret;
- int end_trans = 0;
-
- if (sinfo->full)
- return 0;
-
- spin_lock(&sinfo->lock);
- ret = should_alloc_chunk(sinfo, num_bytes + 2 * 1024 * 1024);
- spin_unlock(&sinfo->lock);
- if (!ret)
- return 0;
-
- if (!trans) {
- trans = btrfs_join_transaction(root, 1);
- BUG_ON(IS_ERR(trans));
- end_trans = 1;
- }
-
- ret = do_chunk_alloc(trans, root->fs_info->extent_root,
- num_bytes + 2 * 1024 * 1024,
- get_alloc_profile(root, sinfo->flags), 0);
-
- if (end_trans)
- btrfs_end_transaction(trans, root);
-
- return ret == 1 ? 1 : 0;
-}
-
/*
* shrink metadata reservation for delalloc
*/
static int shrink_delalloc(struct btrfs_trans_handle *trans,
- struct btrfs_root *root, u64 to_reclaim)
+ struct btrfs_root *root, u64 to_reclaim, int sync)
{
struct btrfs_block_rsv *block_rsv;
+ struct btrfs_space_info *space_info;
u64 reserved;
u64 max_reclaim;
u64 reclaimed = 0;
int pause = 1;
- int ret;
+ int nr_pages = (2 * 1024 * 1024) >> PAGE_CACHE_SHIFT;
block_rsv = &root->fs_info->delalloc_block_rsv;
- spin_lock(&block_rsv->lock);
- reserved = block_rsv->reserved;
- spin_unlock(&block_rsv->lock);
+ space_info = block_rsv->space_info;
+
+ smp_mb();
+ reserved = space_info->bytes_reserved;
if (reserved == 0)
return 0;
@@ -3128,104 +3342,169 @@ static int shrink_delalloc(struct btrfs_trans_handle *trans,
max_reclaim = min(reserved, to_reclaim);
while (1) {
- ret = btrfs_start_one_delalloc_inode(root, trans ? 1 : 0);
- if (!ret) {
- __set_current_state(TASK_INTERRUPTIBLE);
- schedule_timeout(pause);
- pause <<= 1;
- if (pause > HZ / 10)
- pause = HZ / 10;
- } else {
- pause = 1;
- }
+ /* have the flusher threads jump in and do some IO */
+ smp_mb();
+ nr_pages = min_t(unsigned long, nr_pages,
+ root->fs_info->delalloc_bytes >> PAGE_CACHE_SHIFT);
+ writeback_inodes_sb_nr_if_idle(root->fs_info->sb, nr_pages);
- spin_lock(&block_rsv->lock);
- if (reserved > block_rsv->reserved)
- reclaimed = reserved - block_rsv->reserved;
- reserved = block_rsv->reserved;
- spin_unlock(&block_rsv->lock);
+ spin_lock(&space_info->lock);
+ if (reserved > space_info->bytes_reserved)
+ reclaimed += reserved - space_info->bytes_reserved;
+ reserved = space_info->bytes_reserved;
+ spin_unlock(&space_info->lock);
if (reserved == 0 || reclaimed >= max_reclaim)
break;
if (trans && trans->transaction->blocked)
return -EAGAIN;
+
+ __set_current_state(TASK_INTERRUPTIBLE);
+ schedule_timeout(pause);
+ pause <<= 1;
+ if (pause > HZ / 10)
+ pause = HZ / 10;
+
}
return reclaimed >= to_reclaim;
}
-static int should_retry_reserve(struct btrfs_trans_handle *trans,
- struct btrfs_root *root,
- struct btrfs_block_rsv *block_rsv,
- u64 num_bytes, int *retries)
+/*
+ * Retries tells us how many times we've called reserve_metadata_bytes. The
+ * idea is if this is the first call (retries == 0) then we will add to our
+ * reserved count if we can't make the allocation in order to hold our place
+ * while we go and try and free up space. That way for retries > 1 we don't try
+ * and add space, we just check to see if the amount of unused space is >= the
+ * total space, meaning that our reservation is valid.
+ *
+ * However if we don't intend to retry this reservation, pass -1 as retries so
+ * that it short circuits this logic.
+ */
+static int reserve_metadata_bytes(struct btrfs_trans_handle *trans,
+ struct btrfs_root *root,
+ struct btrfs_block_rsv *block_rsv,
+ u64 orig_bytes, int flush)
{
struct btrfs_space_info *space_info = block_rsv->space_info;
- int ret;
+ u64 unused;
+ u64 num_bytes = orig_bytes;
+ int retries = 0;
+ int ret = 0;
+ bool reserved = false;
+ bool committed = false;
- if ((*retries) > 2)
- return -ENOSPC;
+again:
+ ret = -ENOSPC;
+ if (reserved)
+ num_bytes = 0;
- ret = maybe_allocate_chunk(trans, root, space_info, num_bytes);
- if (ret)
- return 1;
+ spin_lock(&space_info->lock);
+ unused = space_info->bytes_used + space_info->bytes_reserved +
+ space_info->bytes_pinned + space_info->bytes_readonly +
+ space_info->bytes_may_use;
- if (trans && trans->transaction->in_commit)
- return -ENOSPC;
+ /*
+ * The idea here is that we've not already over-reserved the block group
+ * then we can go ahead and save our reservation first and then start
+ * flushing if we need to. Otherwise if we've already overcommitted
+ * lets start flushing stuff first and then come back and try to make
+ * our reservation.
+ */
+ if (unused <= space_info->total_bytes) {
+ unused -= space_info->total_bytes;
+ if (unused >= num_bytes) {
+ if (!reserved)
+ space_info->bytes_reserved += orig_bytes;
+ ret = 0;
+ } else {
+ /*
+ * Ok set num_bytes to orig_bytes since we aren't
+ * overocmmitted, this way we only try and reclaim what
+ * we need.
+ */
+ num_bytes = orig_bytes;
+ }
+ } else {
+ /*
+ * Ok we're over committed, set num_bytes to the overcommitted
+ * amount plus the amount of bytes that we need for this
+ * reservation.
+ */
+ num_bytes = unused - space_info->total_bytes +
+ (orig_bytes * (retries + 1));
+ }
- ret = shrink_delalloc(trans, root, num_bytes);
- if (ret)
- return ret;
+ /*
+ * Couldn't make our reservation, save our place so while we're trying
+ * to reclaim space we can actually use it instead of somebody else
+ * stealing it from us.
+ */
+ if (ret && !reserved) {
+ space_info->bytes_reserved += orig_bytes;
+ reserved = true;
+ }
- spin_lock(&space_info->lock);
- if (space_info->bytes_pinned < num_bytes)
- ret = 1;
spin_unlock(&space_info->lock);
- if (ret)
- return -ENOSPC;
-
- (*retries)++;
- if (trans)
- return -EAGAIN;
+ if (!ret)
+ return 0;
- trans = btrfs_join_transaction(root, 1);
- BUG_ON(IS_ERR(trans));
- ret = btrfs_commit_transaction(trans, root);
- BUG_ON(ret);
+ if (!flush)
+ goto out;
- return 1;
-}
+ /*
+ * We do synchronous shrinking since we don't actually unreserve
+ * metadata until after the IO is completed.
+ */
+ ret = shrink_delalloc(trans, root, num_bytes, 1);
+ if (ret > 0)
+ return 0;
+ else if (ret < 0)
+ goto out;
-static int reserve_metadata_bytes(struct btrfs_block_rsv *block_rsv,
- u64 num_bytes)
-{
- struct btrfs_space_info *space_info = block_rsv->space_info;
- u64 unused;
- int ret = -ENOSPC;
+ /*
+ * So if we were overcommitted it's possible that somebody else flushed
+ * out enough space and we simply didn't have enough space to reclaim,
+ * so go back around and try again.
+ */
+ if (retries < 2) {
+ retries++;
+ goto again;
+ }
spin_lock(&space_info->lock);
- unused = space_info->bytes_used + space_info->bytes_reserved +
- space_info->bytes_pinned + space_info->bytes_readonly;
+ /*
+ * Not enough space to be reclaimed, don't bother committing the
+ * transaction.
+ */
+ if (space_info->bytes_pinned < orig_bytes)
+ ret = -ENOSPC;
+ spin_unlock(&space_info->lock);
+ if (ret)
+ goto out;
- if (unused < space_info->total_bytes)
- unused = space_info->total_bytes - unused;
- else
- unused = 0;
+ ret = -EAGAIN;
+ if (trans || committed)
+ goto out;
- if (unused >= num_bytes) {
- if (block_rsv->priority >= 10) {
- space_info->bytes_reserved += num_bytes;
- ret = 0;
- } else {
- if ((unused + block_rsv->reserved) *
- block_rsv->priority >=
- (num_bytes + block_rsv->reserved) * 10) {
- space_info->bytes_reserved += num_bytes;
- ret = 0;
- }
- }
+ ret = -ENOSPC;
+ trans = btrfs_join_transaction(root, 1);
+ if (IS_ERR(trans))
+ goto out;
+ ret = btrfs_commit_transaction(trans, root);
+ if (!ret) {
+ trans = NULL;
+ committed = true;
+ goto again;
+ }
+
+out:
+ if (reserved) {
+ spin_lock(&space_info->lock);
+ space_info->bytes_reserved -= orig_bytes;
+ spin_unlock(&space_info->lock);
}
- spin_unlock(&space_info->lock);
return ret;
}
@@ -3327,18 +3606,14 @@ struct btrfs_block_rsv *btrfs_alloc_block_rsv(struct btrfs_root *root)
{
struct btrfs_block_rsv *block_rsv;
struct btrfs_fs_info *fs_info = root->fs_info;
- u64 alloc_target;
block_rsv = kmalloc(sizeof(*block_rsv), GFP_NOFS);
if (!block_rsv)
return NULL;
btrfs_init_block_rsv(block_rsv);
-
- alloc_target = btrfs_get_alloc_profile(root, 0);
block_rsv->space_info = __find_space_info(fs_info,
BTRFS_BLOCK_GROUP_METADATA);
-
return block_rsv;
}
@@ -3369,23 +3644,19 @@ void btrfs_add_durable_block_rsv(struct btrfs_fs_info *fs_info,
int btrfs_block_rsv_add(struct btrfs_trans_handle *trans,
struct btrfs_root *root,
struct btrfs_block_rsv *block_rsv,
- u64 num_bytes, int *retries)
+ u64 num_bytes)
{
int ret;
if (num_bytes == 0)
return 0;
-again:
- ret = reserve_metadata_bytes(block_rsv, num_bytes);
+
+ ret = reserve_metadata_bytes(trans, root, block_rsv, num_bytes, 1);
if (!ret) {
block_rsv_add_bytes(block_rsv, num_bytes, 1);
return 0;
}
- ret = should_retry_reserve(trans, root, block_rsv, num_bytes, retries);
- if (ret > 0)
- goto again;
-
return ret;
}
@@ -3420,7 +3691,8 @@ int btrfs_block_rsv_check(struct btrfs_trans_handle *trans,
return 0;
if (block_rsv->refill_used) {
- ret = reserve_metadata_bytes(block_rsv, num_bytes);
+ ret = reserve_metadata_bytes(trans, root, block_rsv,
+ num_bytes, 0);
if (!ret) {
block_rsv_add_bytes(block_rsv, num_bytes, 0);
return 0;
@@ -3499,6 +3771,8 @@ static u64 calc_global_metadata_size(struct btrfs_fs_info *fs_info)
sinfo = __find_space_info(fs_info, BTRFS_BLOCK_GROUP_METADATA);
spin_lock(&sinfo->lock);
+ if (sinfo->flags & BTRFS_BLOCK_GROUP_DATA)
+ data_used = 0;
meta_used = sinfo->bytes_used;
spin_unlock(&sinfo->lock);
@@ -3526,7 +3800,8 @@ static void update_global_block_rsv(struct btrfs_fs_info *fs_info)
block_rsv->size = num_bytes;
num_bytes = sinfo->bytes_used + sinfo->bytes_pinned +
- sinfo->bytes_reserved + sinfo->bytes_readonly;
+ sinfo->bytes_reserved + sinfo->bytes_readonly +
+ sinfo->bytes_may_use;
if (sinfo->total_bytes > num_bytes) {
num_bytes = sinfo->total_bytes - num_bytes;
@@ -3597,7 +3872,7 @@ static u64 calc_trans_metadata_size(struct btrfs_root *root, int num_items)
int btrfs_trans_reserve_metadata(struct btrfs_trans_handle *trans,
struct btrfs_root *root,
- int num_items, int *retries)
+ int num_items)
{
u64 num_bytes;
int ret;
@@ -3607,7 +3882,7 @@ int btrfs_trans_reserve_metadata(struct btrfs_trans_handle *trans,
num_bytes = calc_trans_metadata_size(root, num_items);
ret = btrfs_block_rsv_add(trans, root, &root->fs_info->trans_block_rsv,
- num_bytes, retries);
+ num_bytes);
if (!ret) {
trans->bytes_reserved += num_bytes;
trans->block_rsv = &root->fs_info->trans_block_rsv;
@@ -3681,14 +3956,13 @@ int btrfs_delalloc_reserve_metadata(struct inode *inode, u64 num_bytes)
struct btrfs_block_rsv *block_rsv = &root->fs_info->delalloc_block_rsv;
u64 to_reserve;
int nr_extents;
- int retries = 0;
int ret;
if (btrfs_transaction_in_commit(root->fs_info))
schedule_timeout(1);
num_bytes = ALIGN(num_bytes, root->sectorsize);
-again:
+
spin_lock(&BTRFS_I(inode)->accounting_lock);
nr_extents = atomic_read(&BTRFS_I(inode)->outstanding_extents) + 1;
if (nr_extents > BTRFS_I(inode)->reserved_extents) {
@@ -3698,18 +3972,14 @@ again:
nr_extents = 0;
to_reserve = 0;
}
+ spin_unlock(&BTRFS_I(inode)->accounting_lock);
to_reserve += calc_csum_metadata_size(inode, num_bytes);
- ret = reserve_metadata_bytes(block_rsv, to_reserve);
- if (ret) {
- spin_unlock(&BTRFS_I(inode)->accounting_lock);
- ret = should_retry_reserve(NULL, root, block_rsv, to_reserve,
- &retries);
- if (ret > 0)
- goto again;
+ ret = reserve_metadata_bytes(NULL, root, block_rsv, to_reserve, 1);
+ if (ret)
return ret;
- }
+ spin_lock(&BTRFS_I(inode)->accounting_lock);
BTRFS_I(inode)->reserved_extents += nr_extents;
atomic_inc(&BTRFS_I(inode)->outstanding_extents);
spin_unlock(&BTRFS_I(inode)->accounting_lock);
@@ -3717,7 +3987,7 @@ again:
block_rsv_add_bytes(block_rsv, to_reserve, 1);
if (block_rsv->size > 512 * 1024 * 1024)
- shrink_delalloc(NULL, root, to_reserve);
+ shrink_delalloc(NULL, root, to_reserve, 0);
return 0;
}
@@ -3776,12 +4046,12 @@ static int update_block_group(struct btrfs_trans_handle *trans,
struct btrfs_root *root,
u64 bytenr, u64 num_bytes, int alloc)
{
- struct btrfs_block_group_cache *cache;
+ struct btrfs_block_group_cache *cache = NULL;
struct btrfs_fs_info *info = root->fs_info;
- int factor;
u64 total = num_bytes;
u64 old_val;
u64 byte_in_group;
+ int factor;
/* block accounting for super block */
spin_lock(&info->delalloc_lock);
@@ -3803,11 +4073,25 @@ static int update_block_group(struct btrfs_trans_handle *trans,
factor = 2;
else
factor = 1;
+ /*
+ * If this block group has free space cache written out, we
+ * need to make sure to load it if we are removing space. This
+ * is because we need the unpinning stage to actually add the
+ * space back to the block group, otherwise we will leak space.
+ */
+ if (!alloc && cache->cached == BTRFS_CACHE_NO)
+ cache_block_group(cache, trans, 1);
+
byte_in_group = bytenr - cache->key.objectid;
WARN_ON(byte_in_group > cache->key.offset);
spin_lock(&cache->space_info->lock);
spin_lock(&cache->lock);
+
+ if (btrfs_super_cache_generation(&info->super_copy) != 0 &&
+ cache->disk_cache_state < BTRFS_DC_CLEAR)
+ cache->disk_cache_state = BTRFS_DC_CLEAR;
+
cache->dirty = 1;
old_val = btrfs_block_group_used(&cache->item);
num_bytes = min(total, cache->key.offset - byte_in_group);
@@ -4554,6 +4838,7 @@ static noinline int find_free_extent(struct btrfs_trans_handle *trans,
bool found_uncached_bg = false;
bool failed_cluster_refill = false;
bool failed_alloc = false;
+ bool use_cluster = true;
u64 ideal_cache_percent = 0;
u64 ideal_cache_offset = 0;
@@ -4568,16 +4853,24 @@ static noinline int find_free_extent(struct btrfs_trans_handle *trans,
return -ENOSPC;
}
+ /*
+ * If the space info is for both data and metadata it means we have a
+ * small filesystem and we can't use the clustering stuff.
+ */
+ if (btrfs_mixed_space_info(space_info))
+ use_cluster = false;
+
if (orig_root->ref_cows || empty_size)
allowed_chunk_alloc = 1;
- if (data & BTRFS_BLOCK_GROUP_METADATA) {
+ if (data & BTRFS_BLOCK_GROUP_METADATA && use_cluster) {
last_ptr = &root->fs_info->meta_alloc_cluster;
if (!btrfs_test_opt(root, SSD))
empty_cluster = 64 * 1024;
}
- if ((data & BTRFS_BLOCK_GROUP_DATA) && btrfs_test_opt(root, SSD)) {
+ if ((data & BTRFS_BLOCK_GROUP_DATA) && use_cluster &&
+ btrfs_test_opt(root, SSD)) {
last_ptr = &root->fs_info->data_alloc_cluster;
}
@@ -4641,6 +4934,10 @@ have_block_group:
if (unlikely(block_group->cached == BTRFS_CACHE_NO)) {
u64 free_percent;
+ ret = cache_block_group(block_group, trans, 1);
+ if (block_group->cached == BTRFS_CACHE_FINISHED)
+ goto have_block_group;
+
free_percent = btrfs_block_group_used(&block_group->item);
free_percent *= 100;
free_percent = div64_u64(free_percent,
@@ -4661,7 +4958,7 @@ have_block_group:
if (loop > LOOP_CACHING_NOWAIT ||
(loop > LOOP_FIND_IDEAL &&
atomic_read(&space_info->caching_threads) < 2)) {
- ret = cache_block_group(block_group);
+ ret = cache_block_group(block_group, trans, 0);
BUG_ON(ret);
}
found_uncached_bg = true;
@@ -5218,7 +5515,7 @@ int btrfs_alloc_logged_file_extent(struct btrfs_trans_handle *trans,
u64 num_bytes = ins->offset;
block_group = btrfs_lookup_block_group(root->fs_info, ins->objectid);
- cache_block_group(block_group);
+ cache_block_group(block_group, trans, 0);
caching_ctl = get_caching_control(block_group);
if (!caching_ctl) {
@@ -5308,7 +5605,8 @@ use_block_rsv(struct btrfs_trans_handle *trans,
block_rsv = get_block_rsv(trans, root);
if (block_rsv->size == 0) {
- ret = reserve_metadata_bytes(block_rsv, blocksize);
+ ret = reserve_metadata_bytes(trans, root, block_rsv,
+ blocksize, 0);
if (ret)
return ERR_PTR(ret);
return block_rsv;
@@ -5318,11 +5616,6 @@ use_block_rsv(struct btrfs_trans_handle *trans,
if (!ret)
return block_rsv;
- WARN_ON(1);
- printk(KERN_INFO"block_rsv size %llu reserved %llu freed %llu %llu\n",
- block_rsv->size, block_rsv->reserved,
- block_rsv->freed[0], block_rsv->freed[1]);
-
return ERR_PTR(-ENOSPC);
}
@@ -5421,7 +5714,6 @@ static noinline void reada_walk_down(struct btrfs_trans_handle *trans,
u64 generation;
u64 refs;
u64 flags;
- u64 last = 0;
u32 nritems;
u32 blocksize;
struct btrfs_key key;
@@ -5489,7 +5781,6 @@ reada:
generation);
if (ret)
break;
- last = bytenr + blocksize;
nread++;
}
wc->reada_slot = slot;
@@ -7813,6 +8104,40 @@ out:
return ret;
}
+void btrfs_put_block_group_cache(struct btrfs_fs_info *info)
+{
+ struct btrfs_block_group_cache *block_group;
+ u64 last = 0;
+
+ while (1) {
+ struct inode *inode;
+
+ block_group = btrfs_lookup_first_block_group(info, last);
+ while (block_group) {
+ spin_lock(&block_group->lock);
+ if (block_group->iref)
+ break;
+ spin_unlock(&block_group->lock);
+ block_group = next_block_group(info->tree_root,
+ block_group);
+ }
+ if (!block_group) {
+ if (last == 0)
+ break;
+ last = 0;
+ continue;
+ }
+
+ inode = block_group->inode;
+ block_group->iref = 0;
+ block_group->inode = NULL;
+ spin_unlock(&block_group->lock);
+ iput(inode);
+ last = block_group->key.objectid + block_group->key.offset;
+ btrfs_put_block_group(block_group);
+ }
+}
+
int btrfs_free_block_groups(struct btrfs_fs_info *info)
{
struct btrfs_block_group_cache *block_group;
@@ -7896,6 +8221,8 @@ int btrfs_read_block_groups(struct btrfs_root *root)
struct btrfs_key key;
struct btrfs_key found_key;
struct extent_buffer *leaf;
+ int need_clear = 0;
+ u64 cache_gen;
root = info->extent_root;
key.objectid = 0;
@@ -7905,6 +8232,15 @@ int btrfs_read_block_groups(struct btrfs_root *root)
if (!path)
return -ENOMEM;
+ cache_gen = btrfs_super_cache_generation(&root->fs_info->super_copy);
+ if (cache_gen != 0 &&
+ btrfs_super_generation(&root->fs_info->super_copy) != cache_gen)
+ need_clear = 1;
+ if (btrfs_test_opt(root, CLEAR_CACHE))
+ need_clear = 1;
+ if (!btrfs_test_opt(root, SPACE_CACHE) && cache_gen)
+ printk(KERN_INFO "btrfs: disk space caching is enabled\n");
+
while (1) {
ret = find_first_block_group(root, path, &key);
if (ret > 0)
@@ -7927,6 +8263,9 @@ int btrfs_read_block_groups(struct btrfs_root *root)
INIT_LIST_HEAD(&cache->list);
INIT_LIST_HEAD(&cache->cluster_list);
+ if (need_clear)
+ cache->disk_cache_state = BTRFS_DC_CLEAR;
+
/*
* we only want to have 32k of ram per block group for keeping
* track of free space, and if we pass 1/2 of that we want to
@@ -8031,6 +8370,7 @@ int btrfs_make_block_group(struct btrfs_trans_handle *trans,
cache->key.offset = size;
cache->key.type = BTRFS_BLOCK_GROUP_ITEM_KEY;
cache->sectorsize = root->sectorsize;
+ cache->fs_info = root->fs_info;
/*
* we only want to have 32k of ram per block group for keeping track
@@ -8087,8 +8427,11 @@ int btrfs_remove_block_group(struct btrfs_trans_handle *trans,
struct btrfs_path *path;
struct btrfs_block_group_cache *block_group;
struct btrfs_free_cluster *cluster;
+ struct btrfs_root *tree_root = root->fs_info->tree_root;
struct btrfs_key key;
+ struct inode *inode;
int ret;
+ int factor;
root = root->fs_info->extent_root;
@@ -8097,6 +8440,12 @@ int btrfs_remove_block_group(struct btrfs_trans_handle *trans,
BUG_ON(!block_group->ro);
memcpy(&key, &block_group->key, sizeof(key));
+ if (block_group->flags & (BTRFS_BLOCK_GROUP_DUP |
+ BTRFS_BLOCK_GROUP_RAID1 |
+ BTRFS_BLOCK_GROUP_RAID10))
+ factor = 2;
+ else
+ factor = 1;
/* make sure this block group isn't part of an allocation cluster */
cluster = &root->fs_info->data_alloc_cluster;
@@ -8116,6 +8465,40 @@ int btrfs_remove_block_group(struct btrfs_trans_handle *trans,
path = btrfs_alloc_path();
BUG_ON(!path);
+ inode = lookup_free_space_inode(root, block_group, path);
+ if (!IS_ERR(inode)) {
+ btrfs_orphan_add(trans, inode);
+ clear_nlink(inode);
+ /* One for the block groups ref */
+ spin_lock(&block_group->lock);
+ if (block_group->iref) {
+ block_group->iref = 0;
+ block_group->inode = NULL;
+ spin_unlock(&block_group->lock);
+ iput(inode);
+ } else {
+ spin_unlock(&block_group->lock);
+ }
+ /* One for our lookup ref */
+ iput(inode);
+ }
+
+ key.objectid = BTRFS_FREE_SPACE_OBJECTID;
+ key.offset = block_group->key.objectid;
+ key.type = 0;
+
+ ret = btrfs_search_slot(trans, tree_root, &key, path, -1, 1);
+ if (ret < 0)
+ goto out;
+ if (ret > 0)
+ btrfs_release_path(tree_root, path);
+ if (ret == 0) {
+ ret = btrfs_del_item(trans, tree_root, path);
+ if (ret)
+ goto out;
+ btrfs_release_path(tree_root, path);
+ }
+
spin_lock(&root->fs_info->block_group_cache_lock);
rb_erase(&block_group->cache_node,
&root->fs_info->block_group_cache_tree);
@@ -8137,8 +8520,11 @@ int btrfs_remove_block_group(struct btrfs_trans_handle *trans,
spin_lock(&block_group->space_info->lock);
block_group->space_info->total_bytes -= block_group->key.offset;
block_group->space_info->bytes_readonly -= block_group->key.offset;
+ block_group->space_info->disk_total -= block_group->key.offset * factor;
spin_unlock(&block_group->space_info->lock);
+ memcpy(&key, &block_group->key, sizeof(key));
+
btrfs_clear_space_info_full(root->fs_info);
btrfs_put_block_group(block_group);
diff --git a/fs/btrfs/extent_io.c b/fs/btrfs/extent_io.c
index d74e6af9b53..eac10e3260a 100644
--- a/fs/btrfs/extent_io.c
+++ b/fs/btrfs/extent_io.c
@@ -104,7 +104,7 @@ void extent_io_tree_init(struct extent_io_tree *tree,
struct address_space *mapping, gfp_t mask)
{
tree->state = RB_ROOT;
- tree->buffer = RB_ROOT;
+ INIT_RADIX_TREE(&tree->buffer, GFP_ATOMIC);
tree->ops = NULL;
tree->dirty_bytes = 0;
spin_lock_init(&tree->lock);
@@ -235,50 +235,6 @@ static inline struct rb_node *tree_search(struct extent_io_tree *tree,
return ret;
}
-static struct extent_buffer *buffer_tree_insert(struct extent_io_tree *tree,
- u64 offset, struct rb_node *node)
-{
- struct rb_root *root = &tree->buffer;
- struct rb_node **p = &root->rb_node;
- struct rb_node *parent = NULL;
- struct extent_buffer *eb;
-
- while (*p) {
- parent = *p;
- eb = rb_entry(parent, struct extent_buffer, rb_node);
-
- if (offset < eb->start)
- p = &(*p)->rb_left;
- else if (offset > eb->start)
- p = &(*p)->rb_right;
- else
- return eb;
- }
-
- rb_link_node(node, parent, p);
- rb_insert_color(node, root);
- return NULL;
-}
-
-static struct extent_buffer *buffer_search(struct extent_io_tree *tree,
- u64 offset)
-{
- struct rb_root *root = &tree->buffer;
- struct rb_node *n = root->rb_node;
- struct extent_buffer *eb;
-
- while (n) {
- eb = rb_entry(n, struct extent_buffer, rb_node);
- if (offset < eb->start)
- n = n->rb_left;
- else if (offset > eb->start)
- n = n->rb_right;
- else
- return eb;
- }
- return NULL;
-}
-
static void merge_cb(struct extent_io_tree *tree, struct extent_state *new,
struct extent_state *other)
{
@@ -1901,10 +1857,8 @@ static int submit_one_bio(int rw, struct bio *bio, int mirror_num,
struct page *page = bvec->bv_page;
struct extent_io_tree *tree = bio->bi_private;
u64 start;
- u64 end;
start = ((u64)page->index << PAGE_CACHE_SHIFT) + bvec->bv_offset;
- end = start + bvec->bv_len - 1;
bio->bi_private = NULL;
@@ -2204,7 +2158,6 @@ static int __extent_writepage(struct page *page, struct writeback_control *wbc,
u64 last_byte = i_size_read(inode);
u64 block_start;
u64 iosize;
- u64 unlock_start;
sector_t sector;
struct extent_state *cached_state = NULL;
struct extent_map *em;
@@ -2329,7 +2282,6 @@ static int __extent_writepage(struct page *page, struct writeback_control *wbc,
if (tree->ops && tree->ops->writepage_end_io_hook)
tree->ops->writepage_end_io_hook(page, start,
page_end, NULL, 1);
- unlock_start = page_end + 1;
goto done;
}
@@ -2340,7 +2292,6 @@ static int __extent_writepage(struct page *page, struct writeback_control *wbc,
if (tree->ops && tree->ops->writepage_end_io_hook)
tree->ops->writepage_end_io_hook(page, cur,
page_end, NULL, 1);
- unlock_start = page_end + 1;
break;
}
em = epd->get_extent(inode, page, pg_offset, cur,
@@ -2387,7 +2338,6 @@ static int __extent_writepage(struct page *page, struct writeback_control *wbc,
cur += iosize;
pg_offset += iosize;
- unlock_start = cur;
continue;
}
/* leave this out until we have a page_mkwrite call */
@@ -2473,7 +2423,6 @@ static int extent_write_cache_pages(struct extent_io_tree *tree,
pgoff_t index;
pgoff_t end; /* Inclusive */
int scanned = 0;
- int range_whole = 0;
pagevec_init(&pvec, 0);
if (wbc->range_cyclic) {
@@ -2482,8 +2431,6 @@ static int extent_write_cache_pages(struct extent_io_tree *tree,
} else {
index = wbc->range_start >> PAGE_CACHE_SHIFT;
end = wbc->range_end >> PAGE_CACHE_SHIFT;
- if (wbc->range_start == 0 && wbc->range_end == LLONG_MAX)
- range_whole = 1;
scanned = 1;
}
retry:
@@ -2823,6 +2770,8 @@ int extent_prepare_write(struct extent_io_tree *tree,
NULL, 1,
end_bio_extent_preparewrite, 0,
0, 0);
+ if (ret && !err)
+ err = ret;
iocount++;
block_start = block_start + iosize;
} else {
@@ -3104,6 +3053,39 @@ static void __free_extent_buffer(struct extent_buffer *eb)
kmem_cache_free(extent_buffer_cache, eb);
}
+/*
+ * Helper for releasing extent buffer page.
+ */
+static void btrfs_release_extent_buffer_page(struct extent_buffer *eb,
+ unsigned long start_idx)
+{
+ unsigned long index;
+ struct page *page;
+
+ if (!eb->first_page)
+ return;
+
+ index = num_extent_pages(eb->start, eb->len);
+ if (start_idx >= index)
+ return;
+
+ do {
+ index--;
+ page = extent_buffer_page(eb, index);
+ if (page)
+ page_cache_release(page);
+ } while (index != start_idx);
+}
+
+/*
+ * Helper for releasing the extent buffer.
+ */
+static inline void btrfs_release_extent_buffer(struct extent_buffer *eb)
+{
+ btrfs_release_extent_buffer_page(eb, 0);
+ __free_extent_buffer(eb);
+}
+
struct extent_buffer *alloc_extent_buffer(struct extent_io_tree *tree,
u64 start, unsigned long len,
struct page *page0,
@@ -3117,16 +3099,16 @@ struct extent_buffer *alloc_extent_buffer(struct extent_io_tree *tree,
struct page *p;
struct address_space *mapping = tree->mapping;
int uptodate = 1;
+ int ret;
- spin_lock(&tree->buffer_lock);
- eb = buffer_search(tree, start);
- if (eb) {
- atomic_inc(&eb->refs);
- spin_unlock(&tree->buffer_lock);
+ rcu_read_lock();
+ eb = radix_tree_lookup(&tree->buffer, start >> PAGE_CACHE_SHIFT);
+ if (eb && atomic_inc_not_zero(&eb->refs)) {
+ rcu_read_unlock();
mark_page_accessed(eb->first_page);
return eb;
}
- spin_unlock(&tree->buffer_lock);
+ rcu_read_unlock();
eb = __alloc_extent_buffer(tree, start, len, mask);
if (!eb)
@@ -3165,26 +3147,31 @@ struct extent_buffer *alloc_extent_buffer(struct extent_io_tree *tree,
if (uptodate)
set_bit(EXTENT_BUFFER_UPTODATE, &eb->bflags);
+ ret = radix_tree_preload(GFP_NOFS & ~__GFP_HIGHMEM);
+ if (ret)
+ goto free_eb;
+
spin_lock(&tree->buffer_lock);
- exists = buffer_tree_insert(tree, start, &eb->rb_node);
- if (exists) {
+ ret = radix_tree_insert(&tree->buffer, start >> PAGE_CACHE_SHIFT, eb);
+ if (ret == -EEXIST) {
+ exists = radix_tree_lookup(&tree->buffer,
+ start >> PAGE_CACHE_SHIFT);
/* add one reference for the caller */
atomic_inc(&exists->refs);
spin_unlock(&tree->buffer_lock);
+ radix_tree_preload_end();
goto free_eb;
}
/* add one reference for the tree */
atomic_inc(&eb->refs);
spin_unlock(&tree->buffer_lock);
+ radix_tree_preload_end();
return eb;
free_eb:
if (!atomic_dec_and_test(&eb->refs))
return exists;
- for (index = 1; index < i; index++)
- page_cache_release(extent_buffer_page(eb, index));
- page_cache_release(extent_buffer_page(eb, 0));
- __free_extent_buffer(eb);
+ btrfs_release_extent_buffer(eb);
return exists;
}
@@ -3194,16 +3181,16 @@ struct extent_buffer *find_extent_buffer(struct extent_io_tree *tree,
{
struct extent_buffer *eb;
- spin_lock(&tree->buffer_lock);
- eb = buffer_search(tree, start);
- if (eb)
- atomic_inc(&eb->refs);
- spin_unlock(&tree->buffer_lock);
-
- if (eb)
+ rcu_read_lock();
+ eb = radix_tree_lookup(&tree->buffer, start >> PAGE_CACHE_SHIFT);
+ if (eb && atomic_inc_not_zero(&eb->refs)) {
+ rcu_read_unlock();
mark_page_accessed(eb->first_page);
+ return eb;
+ }
+ rcu_read_unlock();
- return eb;
+ return NULL;
}
void free_extent_buffer(struct extent_buffer *eb)
@@ -3833,34 +3820,45 @@ void memmove_extent_buffer(struct extent_buffer *dst, unsigned long dst_offset,
}
}
+static inline void btrfs_release_extent_buffer_rcu(struct rcu_head *head)
+{
+ struct extent_buffer *eb =
+ container_of(head, struct extent_buffer, rcu_head);
+
+ btrfs_release_extent_buffer(eb);
+}
+
int try_release_extent_buffer(struct extent_io_tree *tree, struct page *page)
{
u64 start = page_offset(page);
struct extent_buffer *eb;
int ret = 1;
- unsigned long i;
- unsigned long num_pages;
spin_lock(&tree->buffer_lock);
- eb = buffer_search(tree, start);
+ eb = radix_tree_lookup(&tree->buffer, start >> PAGE_CACHE_SHIFT);
if (!eb)
goto out;
- if (atomic_read(&eb->refs) > 1) {
+ if (test_bit(EXTENT_BUFFER_DIRTY, &eb->bflags)) {
ret = 0;
goto out;
}
- if (test_bit(EXTENT_BUFFER_DIRTY, &eb->bflags)) {
+
+ /*
+ * set @eb->refs to 0 if it is already 1, and then release the @eb.
+ * Or go back.
+ */
+ if (atomic_cmpxchg(&eb->refs, 1, 0) != 1) {
ret = 0;
goto out;
}
- /* at this point we can safely release the extent buffer */
- num_pages = num_extent_pages(eb->start, eb->len);
- for (i = 0; i < num_pages; i++)
- page_cache_release(extent_buffer_page(eb, i));
- rb_erase(&eb->rb_node, &tree->buffer);
- __free_extent_buffer(eb);
+
+ radix_tree_delete(&tree->buffer, start >> PAGE_CACHE_SHIFT);
out:
spin_unlock(&tree->buffer_lock);
+
+ /* at this point we can safely release the extent buffer */
+ if (atomic_read(&eb->refs) == 0)
+ call_rcu(&eb->rcu_head, btrfs_release_extent_buffer_rcu);
return ret;
}
diff --git a/fs/btrfs/extent_io.h b/fs/btrfs/extent_io.h
index 5691c7b590d..1c6d4f342ef 100644
--- a/fs/btrfs/extent_io.h
+++ b/fs/btrfs/extent_io.h
@@ -85,7 +85,7 @@ struct extent_io_ops {
struct extent_io_tree {
struct rb_root state;
- struct rb_root buffer;
+ struct radix_tree_root buffer;
struct address_space *mapping;
u64 dirty_bytes;
spinlock_t lock;
@@ -123,7 +123,7 @@ struct extent_buffer {
unsigned long bflags;
atomic_t refs;
struct list_head leak_list;
- struct rb_node rb_node;
+ struct rcu_head rcu_head;
/* the spinlock is used to protect most operations */
spinlock_t lock;
diff --git a/fs/btrfs/extent_map.c b/fs/btrfs/extent_map.c
index 454ca52d645..23cb8da3ff6 100644
--- a/fs/btrfs/extent_map.c
+++ b/fs/btrfs/extent_map.c
@@ -335,7 +335,7 @@ struct extent_map *lookup_extent_mapping(struct extent_map_tree *tree,
goto out;
}
if (IS_ERR(rb_node)) {
- em = ERR_PTR(PTR_ERR(rb_node));
+ em = ERR_CAST(rb_node);
goto out;
}
em = rb_entry(rb_node, struct extent_map, rb_node);
@@ -384,7 +384,7 @@ struct extent_map *search_extent_mapping(struct extent_map_tree *tree,
goto out;
}
if (IS_ERR(rb_node)) {
- em = ERR_PTR(PTR_ERR(rb_node));
+ em = ERR_CAST(rb_node);
goto out;
}
em = rb_entry(rb_node, struct extent_map, rb_node);
diff --git a/fs/btrfs/free-space-cache.c b/fs/btrfs/free-space-cache.c
index f488fac04d9..22ee0dc2e6b 100644
--- a/fs/btrfs/free-space-cache.c
+++ b/fs/btrfs/free-space-cache.c
@@ -23,10 +23,761 @@
#include "ctree.h"
#include "free-space-cache.h"
#include "transaction.h"
+#include "disk-io.h"
#define BITS_PER_BITMAP (PAGE_CACHE_SIZE * 8)
#define MAX_CACHE_BYTES_PER_GIG (32 * 1024)
+static void recalculate_thresholds(struct btrfs_block_group_cache
+ *block_group);
+static int link_free_space(struct btrfs_block_group_cache *block_group,
+ struct btrfs_free_space *info);
+
+struct inode *lookup_free_space_inode(struct btrfs_root *root,
+ struct btrfs_block_group_cache
+ *block_group, struct btrfs_path *path)
+{
+ struct btrfs_key key;
+ struct btrfs_key location;
+ struct btrfs_disk_key disk_key;
+ struct btrfs_free_space_header *header;
+ struct extent_buffer *leaf;
+ struct inode *inode = NULL;
+ int ret;
+
+ spin_lock(&block_group->lock);
+ if (block_group->inode)
+ inode = igrab(block_group->inode);
+ spin_unlock(&block_group->lock);
+ if (inode)
+ return inode;
+
+ key.objectid = BTRFS_FREE_SPACE_OBJECTID;
+ key.offset = block_group->key.objectid;
+ key.type = 0;
+
+ ret = btrfs_search_slot(NULL, root, &key, path, 0, 0);
+ if (ret < 0)
+ return ERR_PTR(ret);
+ if (ret > 0) {
+ btrfs_release_path(root, path);
+ return ERR_PTR(-ENOENT);
+ }
+
+ leaf = path->nodes[0];
+ header = btrfs_item_ptr(leaf, path->slots[0],
+ struct btrfs_free_space_header);
+ btrfs_free_space_key(leaf, header, &disk_key);
+ btrfs_disk_key_to_cpu(&location, &disk_key);
+ btrfs_release_path(root, path);
+
+ inode = btrfs_iget(root->fs_info->sb, &location, root, NULL);
+ if (!inode)
+ return ERR_PTR(-ENOENT);
+ if (IS_ERR(inode))
+ return inode;
+ if (is_bad_inode(inode)) {
+ iput(inode);
+ return ERR_PTR(-ENOENT);
+ }
+
+ spin_lock(&block_group->lock);
+ if (!root->fs_info->closing) {
+ block_group->inode = igrab(inode);
+ block_group->iref = 1;
+ }
+ spin_unlock(&block_group->lock);
+
+ return inode;
+}
+
+int create_free_space_inode(struct btrfs_root *root,
+ struct btrfs_trans_handle *trans,
+ struct btrfs_block_group_cache *block_group,
+ struct btrfs_path *path)
+{
+ struct btrfs_key key;
+ struct btrfs_disk_key disk_key;
+ struct btrfs_free_space_header *header;
+ struct btrfs_inode_item *inode_item;
+ struct extent_buffer *leaf;
+ u64 objectid;
+ int ret;
+
+ ret = btrfs_find_free_objectid(trans, root, 0, &objectid);
+ if (ret < 0)
+ return ret;
+
+ ret = btrfs_insert_empty_inode(trans, root, path, objectid);
+ if (ret)
+ return ret;
+
+ leaf = path->nodes[0];
+ inode_item = btrfs_item_ptr(leaf, path->slots[0],
+ struct btrfs_inode_item);
+ btrfs_item_key(leaf, &disk_key, path->slots[0]);
+ memset_extent_buffer(leaf, 0, (unsigned long)inode_item,
+ sizeof(*inode_item));
+ btrfs_set_inode_generation(leaf, inode_item, trans->transid);
+ btrfs_set_inode_size(leaf, inode_item, 0);
+ btrfs_set_inode_nbytes(leaf, inode_item, 0);
+ btrfs_set_inode_uid(leaf, inode_item, 0);
+ btrfs_set_inode_gid(leaf, inode_item, 0);
+ btrfs_set_inode_mode(leaf, inode_item, S_IFREG | 0600);
+ btrfs_set_inode_flags(leaf, inode_item, BTRFS_INODE_NOCOMPRESS |
+ BTRFS_INODE_PREALLOC | BTRFS_INODE_NODATASUM);
+ btrfs_set_inode_nlink(leaf, inode_item, 1);
+ btrfs_set_inode_transid(leaf, inode_item, trans->transid);
+ btrfs_set_inode_block_group(leaf, inode_item,
+ block_group->key.objectid);
+ btrfs_mark_buffer_dirty(leaf);
+ btrfs_release_path(root, path);
+
+ key.objectid = BTRFS_FREE_SPACE_OBJECTID;
+ key.offset = block_group->key.objectid;
+ key.type = 0;
+
+ ret = btrfs_insert_empty_item(trans, root, path, &key,
+ sizeof(struct btrfs_free_space_header));
+ if (ret < 0) {
+ btrfs_release_path(root, path);
+ return ret;
+ }
+ leaf = path->nodes[0];
+ header = btrfs_item_ptr(leaf, path->slots[0],
+ struct btrfs_free_space_header);
+ memset_extent_buffer(leaf, 0, (unsigned long)header, sizeof(*header));
+ btrfs_set_free_space_key(leaf, header, &disk_key);
+ btrfs_mark_buffer_dirty(leaf);
+ btrfs_release_path(root, path);
+
+ return 0;
+}
+
+int btrfs_truncate_free_space_cache(struct btrfs_root *root,
+ struct btrfs_trans_handle *trans,
+ struct btrfs_path *path,
+ struct inode *inode)
+{
+ loff_t oldsize;
+ int ret = 0;
+
+ trans->block_rsv = root->orphan_block_rsv;
+ ret = btrfs_block_rsv_check(trans, root,
+ root->orphan_block_rsv,
+ 0, 5);
+ if (ret)
+ return ret;
+
+ oldsize = i_size_read(inode);
+ btrfs_i_size_write(inode, 0);
+ truncate_pagecache(inode, oldsize, 0);
+
+ /*
+ * We don't need an orphan item because truncating the free space cache
+ * will never be split across transactions.
+ */
+ ret = btrfs_truncate_inode_items(trans, root, inode,
+ 0, BTRFS_EXTENT_DATA_KEY);
+ if (ret) {
+ WARN_ON(1);
+ return ret;
+ }
+
+ return btrfs_update_inode(trans, root, inode);
+}
+
+static int readahead_cache(struct inode *inode)
+{
+ struct file_ra_state *ra;
+ unsigned long last_index;
+
+ ra = kzalloc(sizeof(*ra), GFP_NOFS);
+ if (!ra)
+ return -ENOMEM;
+
+ file_ra_state_init(ra, inode->i_mapping);
+ last_index = (i_size_read(inode) - 1) >> PAGE_CACHE_SHIFT;
+
+ page_cache_sync_readahead(inode->i_mapping, ra, NULL, 0, last_index);
+
+ kfree(ra);
+
+ return 0;
+}
+
+int load_free_space_cache(struct btrfs_fs_info *fs_info,
+ struct btrfs_block_group_cache *block_group)
+{
+ struct btrfs_root *root = fs_info->tree_root;
+ struct inode *inode;
+ struct btrfs_free_space_header *header;
+ struct extent_buffer *leaf;
+ struct page *page;
+ struct btrfs_path *path;
+ u32 *checksums = NULL, *crc;
+ char *disk_crcs = NULL;
+ struct btrfs_key key;
+ struct list_head bitmaps;
+ u64 num_entries;
+ u64 num_bitmaps;
+ u64 generation;
+ u32 cur_crc = ~(u32)0;
+ pgoff_t index = 0;
+ unsigned long first_page_offset;
+ int num_checksums;
+ int ret = 0;
+
+ /*
+ * If we're unmounting then just return, since this does a search on the
+ * normal root and not the commit root and we could deadlock.
+ */
+ smp_mb();
+ if (fs_info->closing)
+ return 0;
+
+ /*
+ * If this block group has been marked to be cleared for one reason or
+ * another then we can't trust the on disk cache, so just return.
+ */
+ spin_lock(&block_group->lock);
+ if (block_group->disk_cache_state != BTRFS_DC_WRITTEN) {
+ spin_unlock(&block_group->lock);
+ return 0;
+ }
+ spin_unlock(&block_group->lock);
+
+ INIT_LIST_HEAD(&bitmaps);
+
+ path = btrfs_alloc_path();
+ if (!path)
+ return 0;
+
+ inode = lookup_free_space_inode(root, block_group, path);
+ if (IS_ERR(inode)) {
+ btrfs_free_path(path);
+ return 0;
+ }
+
+ /* Nothing in the space cache, goodbye */
+ if (!i_size_read(inode)) {
+ btrfs_free_path(path);
+ goto out;
+ }
+
+ key.objectid = BTRFS_FREE_SPACE_OBJECTID;
+ key.offset = block_group->key.objectid;
+ key.type = 0;
+
+ ret = btrfs_search_slot(NULL, root, &key, path, 0, 0);
+ if (ret) {
+ btrfs_free_path(path);
+ goto out;
+ }
+
+ leaf = path->nodes[0];
+ header = btrfs_item_ptr(leaf, path->slots[0],
+ struct btrfs_free_space_header);
+ num_entries = btrfs_free_space_entries(leaf, header);
+ num_bitmaps = btrfs_free_space_bitmaps(leaf, header);
+ generation = btrfs_free_space_generation(leaf, header);
+ btrfs_free_path(path);
+
+ if (BTRFS_I(inode)->generation != generation) {
+ printk(KERN_ERR "btrfs: free space inode generation (%llu) did"
+ " not match free space cache generation (%llu) for "
+ "block group %llu\n",
+ (unsigned long long)BTRFS_I(inode)->generation,
+ (unsigned long long)generation,
+ (unsigned long long)block_group->key.objectid);
+ goto out;
+ }
+
+ if (!num_entries)
+ goto out;
+
+ /* Setup everything for doing checksumming */
+ num_checksums = i_size_read(inode) / PAGE_CACHE_SIZE;
+ checksums = crc = kzalloc(sizeof(u32) * num_checksums, GFP_NOFS);
+ if (!checksums)
+ goto out;
+ first_page_offset = (sizeof(u32) * num_checksums) + sizeof(u64);
+ disk_crcs = kzalloc(first_page_offset, GFP_NOFS);
+ if (!disk_crcs)
+ goto out;
+
+ ret = readahead_cache(inode);
+ if (ret) {
+ ret = 0;
+ goto out;
+ }
+
+ while (1) {
+ struct btrfs_free_space_entry *entry;
+ struct btrfs_free_space *e;
+ void *addr;
+ unsigned long offset = 0;
+ unsigned long start_offset = 0;
+ int need_loop = 0;
+
+ if (!num_entries && !num_bitmaps)
+ break;
+
+ if (index == 0) {
+ start_offset = first_page_offset;
+ offset = start_offset;
+ }
+
+ page = grab_cache_page(inode->i_mapping, index);
+ if (!page) {
+ ret = 0;
+ goto free_cache;
+ }
+
+ if (!PageUptodate(page)) {
+ btrfs_readpage(NULL, page);
+ lock_page(page);
+ if (!PageUptodate(page)) {
+ unlock_page(page);
+ page_cache_release(page);
+ printk(KERN_ERR "btrfs: error reading free "
+ "space cache: %llu\n",
+ (unsigned long long)
+ block_group->key.objectid);
+ goto free_cache;
+ }
+ }
+ addr = kmap(page);
+
+ if (index == 0) {
+ u64 *gen;
+
+ memcpy(disk_crcs, addr, first_page_offset);
+ gen = addr + (sizeof(u32) * num_checksums);
+ if (*gen != BTRFS_I(inode)->generation) {
+ printk(KERN_ERR "btrfs: space cache generation"
+ " (%llu) does not match inode (%llu) "
+ "for block group %llu\n",
+ (unsigned long long)*gen,
+ (unsigned long long)
+ BTRFS_I(inode)->generation,
+ (unsigned long long)
+ block_group->key.objectid);
+ kunmap(page);
+ unlock_page(page);
+ page_cache_release(page);
+ goto free_cache;
+ }
+ crc = (u32 *)disk_crcs;
+ }
+ entry = addr + start_offset;
+
+ /* First lets check our crc before we do anything fun */
+ cur_crc = ~(u32)0;
+ cur_crc = btrfs_csum_data(root, addr + start_offset, cur_crc,
+ PAGE_CACHE_SIZE - start_offset);
+ btrfs_csum_final(cur_crc, (char *)&cur_crc);
+ if (cur_crc != *crc) {
+ printk(KERN_ERR "btrfs: crc mismatch for page %lu in "
+ "block group %llu\n", index,
+ (unsigned long long)block_group->key.objectid);
+ kunmap(page);
+ unlock_page(page);
+ page_cache_release(page);
+ goto free_cache;
+ }
+ crc++;
+
+ while (1) {
+ if (!num_entries)
+ break;
+
+ need_loop = 1;
+ e = kzalloc(sizeof(struct btrfs_free_space), GFP_NOFS);
+ if (!e) {
+ kunmap(page);
+ unlock_page(page);
+ page_cache_release(page);
+ goto free_cache;
+ }
+
+ e->offset = le64_to_cpu(entry->offset);
+ e->bytes = le64_to_cpu(entry->bytes);
+ if (!e->bytes) {
+ kunmap(page);
+ kfree(e);
+ unlock_page(page);
+ page_cache_release(page);
+ goto free_cache;
+ }
+
+ if (entry->type == BTRFS_FREE_SPACE_EXTENT) {
+ spin_lock(&block_group->tree_lock);
+ ret = link_free_space(block_group, e);
+ spin_unlock(&block_group->tree_lock);
+ BUG_ON(ret);
+ } else {
+ e->bitmap = kzalloc(PAGE_CACHE_SIZE, GFP_NOFS);
+ if (!e->bitmap) {
+ kunmap(page);
+ kfree(e);
+ unlock_page(page);
+ page_cache_release(page);
+ goto free_cache;
+ }
+ spin_lock(&block_group->tree_lock);
+ ret = link_free_space(block_group, e);
+ block_group->total_bitmaps++;
+ recalculate_thresholds(block_group);
+ spin_unlock(&block_group->tree_lock);
+ list_add_tail(&e->list, &bitmaps);
+ }
+
+ num_entries--;
+ offset += sizeof(struct btrfs_free_space_entry);
+ if (offset + sizeof(struct btrfs_free_space_entry) >=
+ PAGE_CACHE_SIZE)
+ break;
+ entry++;
+ }
+
+ /*
+ * We read an entry out of this page, we need to move on to the
+ * next page.
+ */
+ if (need_loop) {
+ kunmap(page);
+ goto next;
+ }
+
+ /*
+ * We add the bitmaps at the end of the entries in order that
+ * the bitmap entries are added to the cache.
+ */
+ e = list_entry(bitmaps.next, struct btrfs_free_space, list);
+ list_del_init(&e->list);
+ memcpy(e->bitmap, addr, PAGE_CACHE_SIZE);
+ kunmap(page);
+ num_bitmaps--;
+next:
+ unlock_page(page);
+ page_cache_release(page);
+ index++;
+ }
+
+ ret = 1;
+out:
+ kfree(checksums);
+ kfree(disk_crcs);
+ iput(inode);
+ return ret;
+
+free_cache:
+ /* This cache is bogus, make sure it gets cleared */
+ spin_lock(&block_group->lock);
+ block_group->disk_cache_state = BTRFS_DC_CLEAR;
+ spin_unlock(&block_group->lock);
+ btrfs_remove_free_space_cache(block_group);
+ goto out;
+}
+
+int btrfs_write_out_cache(struct btrfs_root *root,
+ struct btrfs_trans_handle *trans,
+ struct btrfs_block_group_cache *block_group,
+ struct btrfs_path *path)
+{
+ struct btrfs_free_space_header *header;
+ struct extent_buffer *leaf;
+ struct inode *inode;
+ struct rb_node *node;
+ struct list_head *pos, *n;
+ struct page *page;
+ struct extent_state *cached_state = NULL;
+ struct list_head bitmap_list;
+ struct btrfs_key key;
+ u64 bytes = 0;
+ u32 *crc, *checksums;
+ pgoff_t index = 0, last_index = 0;
+ unsigned long first_page_offset;
+ int num_checksums;
+ int entries = 0;
+ int bitmaps = 0;
+ int ret = 0;
+
+ root = root->fs_info->tree_root;
+
+ INIT_LIST_HEAD(&bitmap_list);
+
+ spin_lock(&block_group->lock);
+ if (block_group->disk_cache_state < BTRFS_DC_SETUP) {
+ spin_unlock(&block_group->lock);
+ return 0;
+ }
+ spin_unlock(&block_group->lock);
+
+ inode = lookup_free_space_inode(root, block_group, path);
+ if (IS_ERR(inode))
+ return 0;
+
+ if (!i_size_read(inode)) {
+ iput(inode);
+ return 0;
+ }
+
+ last_index = (i_size_read(inode) - 1) >> PAGE_CACHE_SHIFT;
+ filemap_write_and_wait(inode->i_mapping);
+ btrfs_wait_ordered_range(inode, inode->i_size &
+ ~(root->sectorsize - 1), (u64)-1);
+
+ /* We need a checksum per page. */
+ num_checksums = i_size_read(inode) / PAGE_CACHE_SIZE;
+ crc = checksums = kzalloc(sizeof(u32) * num_checksums, GFP_NOFS);
+ if (!crc) {
+ iput(inode);
+ return 0;
+ }
+
+ /* Since the first page has all of our checksums and our generation we
+ * need to calculate the offset into the page that we can start writing
+ * our entries.
+ */
+ first_page_offset = (sizeof(u32) * num_checksums) + sizeof(u64);
+
+ node = rb_first(&block_group->free_space_offset);
+ if (!node)
+ goto out_free;
+
+ /*
+ * Lock all pages first so we can lock the extent safely.
+ *
+ * NOTE: Because we hold the ref the entire time we're going to write to
+ * the page find_get_page should never fail, so we don't do a check
+ * after find_get_page at this point. Just putting this here so people
+ * know and don't freak out.
+ */
+ while (index <= last_index) {
+ page = grab_cache_page(inode->i_mapping, index);
+ if (!page) {
+ pgoff_t i = 0;
+
+ while (i < index) {
+ page = find_get_page(inode->i_mapping, i);
+ unlock_page(page);
+ page_cache_release(page);
+ page_cache_release(page);
+ i++;
+ }
+ goto out_free;
+ }
+ index++;
+ }
+
+ index = 0;
+ lock_extent_bits(&BTRFS_I(inode)->io_tree, 0, i_size_read(inode) - 1,
+ 0, &cached_state, GFP_NOFS);
+
+ /* Write out the extent entries */
+ do {
+ struct btrfs_free_space_entry *entry;
+ void *addr;
+ unsigned long offset = 0;
+ unsigned long start_offset = 0;
+
+ if (index == 0) {
+ start_offset = first_page_offset;
+ offset = start_offset;
+ }
+
+ page = find_get_page(inode->i_mapping, index);
+
+ addr = kmap(page);
+ entry = addr + start_offset;
+
+ memset(addr, 0, PAGE_CACHE_SIZE);
+ while (1) {
+ struct btrfs_free_space *e;
+
+ e = rb_entry(node, struct btrfs_free_space, offset_index);
+ entries++;
+
+ entry->offset = cpu_to_le64(e->offset);
+ entry->bytes = cpu_to_le64(e->bytes);
+ if (e->bitmap) {
+ entry->type = BTRFS_FREE_SPACE_BITMAP;
+ list_add_tail(&e->list, &bitmap_list);
+ bitmaps++;
+ } else {
+ entry->type = BTRFS_FREE_SPACE_EXTENT;
+ }
+ node = rb_next(node);
+ if (!node)
+ break;
+ offset += sizeof(struct btrfs_free_space_entry);
+ if (offset + sizeof(struct btrfs_free_space_entry) >=
+ PAGE_CACHE_SIZE)
+ break;
+ entry++;
+ }
+ *crc = ~(u32)0;
+ *crc = btrfs_csum_data(root, addr + start_offset, *crc,
+ PAGE_CACHE_SIZE - start_offset);
+ kunmap(page);
+
+ btrfs_csum_final(*crc, (char *)crc);
+ crc++;
+
+ bytes += PAGE_CACHE_SIZE;
+
+ ClearPageChecked(page);
+ set_page_extent_mapped(page);
+ SetPageUptodate(page);
+ set_page_dirty(page);
+
+ /*
+ * We need to release our reference we got for grab_cache_page,
+ * except for the first page which will hold our checksums, we
+ * do that below.
+ */
+ if (index != 0) {
+ unlock_page(page);
+ page_cache_release(page);
+ }
+
+ page_cache_release(page);
+
+ index++;
+ } while (node);
+
+ /* Write out the bitmaps */
+ list_for_each_safe(pos, n, &bitmap_list) {
+ void *addr;
+ struct btrfs_free_space *entry =
+ list_entry(pos, struct btrfs_free_space, list);
+
+ page = find_get_page(inode->i_mapping, index);
+
+ addr = kmap(page);
+ memcpy(addr, entry->bitmap, PAGE_CACHE_SIZE);
+ *crc = ~(u32)0;
+ *crc = btrfs_csum_data(root, addr, *crc, PAGE_CACHE_SIZE);
+ kunmap(page);
+ btrfs_csum_final(*crc, (char *)crc);
+ crc++;
+ bytes += PAGE_CACHE_SIZE;
+
+ ClearPageChecked(page);
+ set_page_extent_mapped(page);
+ SetPageUptodate(page);
+ set_page_dirty(page);
+ unlock_page(page);
+ page_cache_release(page);
+ page_cache_release(page);
+ list_del_init(&entry->list);
+ index++;
+ }
+
+ /* Zero out the rest of the pages just to make sure */
+ while (index <= last_index) {
+ void *addr;
+
+ page = find_get_page(inode->i_mapping, index);
+
+ addr = kmap(page);
+ memset(addr, 0, PAGE_CACHE_SIZE);
+ kunmap(page);
+ ClearPageChecked(page);
+ set_page_extent_mapped(page);
+ SetPageUptodate(page);
+ set_page_dirty(page);
+ unlock_page(page);
+ page_cache_release(page);
+ page_cache_release(page);
+ bytes += PAGE_CACHE_SIZE;
+ index++;
+ }
+
+ btrfs_set_extent_delalloc(inode, 0, bytes - 1, &cached_state);
+
+ /* Write the checksums and trans id to the first page */
+ {
+ void *addr;
+ u64 *gen;
+
+ page = find_get_page(inode->i_mapping, 0);
+
+ addr = kmap(page);
+ memcpy(addr, checksums, sizeof(u32) * num_checksums);
+ gen = addr + (sizeof(u32) * num_checksums);
+ *gen = trans->transid;
+ kunmap(page);
+ ClearPageChecked(page);
+ set_page_extent_mapped(page);
+ SetPageUptodate(page);
+ set_page_dirty(page);
+ unlock_page(page);
+ page_cache_release(page);
+ page_cache_release(page);
+ }
+ BTRFS_I(inode)->generation = trans->transid;
+
+ unlock_extent_cached(&BTRFS_I(inode)->io_tree, 0,
+ i_size_read(inode) - 1, &cached_state, GFP_NOFS);
+
+ filemap_write_and_wait(inode->i_mapping);
+
+ key.objectid = BTRFS_FREE_SPACE_OBJECTID;
+ key.offset = block_group->key.objectid;
+ key.type = 0;
+
+ ret = btrfs_search_slot(trans, root, &key, path, 1, 1);
+ if (ret < 0) {
+ ret = 0;
+ clear_extent_bit(&BTRFS_I(inode)->io_tree, 0, bytes - 1,
+ EXTENT_DIRTY | EXTENT_DELALLOC |
+ EXTENT_DO_ACCOUNTING, 0, 0, NULL, GFP_NOFS);
+ goto out_free;
+ }
+ leaf = path->nodes[0];
+ if (ret > 0) {
+ struct btrfs_key found_key;
+ BUG_ON(!path->slots[0]);
+ path->slots[0]--;
+ btrfs_item_key_to_cpu(leaf, &found_key, path->slots[0]);
+ if (found_key.objectid != BTRFS_FREE_SPACE_OBJECTID ||
+ found_key.offset != block_group->key.objectid) {
+ ret = 0;
+ clear_extent_bit(&BTRFS_I(inode)->io_tree, 0, bytes - 1,
+ EXTENT_DIRTY | EXTENT_DELALLOC |
+ EXTENT_DO_ACCOUNTING, 0, 0, NULL,
+ GFP_NOFS);
+ btrfs_release_path(root, path);
+ goto out_free;
+ }
+ }
+ header = btrfs_item_ptr(leaf, path->slots[0],
+ struct btrfs_free_space_header);
+ btrfs_set_free_space_entries(leaf, header, entries);
+ btrfs_set_free_space_bitmaps(leaf, header, bitmaps);
+ btrfs_set_free_space_generation(leaf, header, trans->transid);
+ btrfs_mark_buffer_dirty(leaf);
+ btrfs_release_path(root, path);
+
+ ret = 1;
+
+out_free:
+ if (ret == 0) {
+ invalidate_inode_pages2_range(inode->i_mapping, 0, index);
+ spin_lock(&block_group->lock);
+ block_group->disk_cache_state = BTRFS_DC_ERROR;
+ spin_unlock(&block_group->lock);
+ BTRFS_I(inode)->generation = 0;
+ }
+ kfree(checksums);
+ btrfs_update_inode(trans, root, inode);
+ iput(inode);
+ return ret;
+}
+
static inline unsigned long offset_to_bit(u64 bitmap_start, u64 sectorsize,
u64 offset)
{
diff --git a/fs/btrfs/free-space-cache.h b/fs/btrfs/free-space-cache.h
index 890a8e79011..e49ca5c321b 100644
--- a/fs/btrfs/free-space-cache.h
+++ b/fs/btrfs/free-space-cache.h
@@ -27,6 +27,24 @@ struct btrfs_free_space {
struct list_head list;
};
+struct inode *lookup_free_space_inode(struct btrfs_root *root,
+ struct btrfs_block_group_cache
+ *block_group, struct btrfs_path *path);
+int create_free_space_inode(struct btrfs_root *root,
+ struct btrfs_trans_handle *trans,
+ struct btrfs_block_group_cache *block_group,
+ struct btrfs_path *path);
+
+int btrfs_truncate_free_space_cache(struct btrfs_root *root,
+ struct btrfs_trans_handle *trans,
+ struct btrfs_path *path,
+ struct inode *inode);
+int load_free_space_cache(struct btrfs_fs_info *fs_info,
+ struct btrfs_block_group_cache *block_group);
+int btrfs_write_out_cache(struct btrfs_root *root,
+ struct btrfs_trans_handle *trans,
+ struct btrfs_block_group_cache *block_group,
+ struct btrfs_path *path);
int btrfs_add_free_space(struct btrfs_block_group_cache *block_group,
u64 bytenr, u64 size);
int btrfs_remove_free_space(struct btrfs_block_group_cache *block_group,
diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c
index 64f99cf69ce..558cac2dfa5 100644
--- a/fs/btrfs/inode.c
+++ b/fs/btrfs/inode.c
@@ -319,8 +319,6 @@ static noinline int compress_file_range(struct inode *inode,
struct btrfs_root *root = BTRFS_I(inode)->root;
struct btrfs_trans_handle *trans;
u64 num_bytes;
- u64 orig_start;
- u64 disk_num_bytes;
u64 blocksize = root->sectorsize;
u64 actual_end;
u64 isize = i_size_read(inode);
@@ -335,8 +333,6 @@ static noinline int compress_file_range(struct inode *inode,
int i;
int will_compress;
- orig_start = start;
-
actual_end = min_t(u64, isize, end + 1);
again:
will_compress = 0;
@@ -371,7 +367,6 @@ again:
total_compressed = min(total_compressed, max_uncompressed);
num_bytes = (end - start + blocksize) & ~(blocksize - 1);
num_bytes = max(blocksize, num_bytes);
- disk_num_bytes = num_bytes;
total_in = 0;
ret = 0;
@@ -467,7 +462,6 @@ again:
if (total_compressed >= total_in) {
will_compress = 0;
} else {
- disk_num_bytes = total_compressed;
num_bytes = total_in;
}
}
@@ -757,20 +751,17 @@ static noinline int cow_file_range(struct inode *inode,
u64 disk_num_bytes;
u64 cur_alloc_size;
u64 blocksize = root->sectorsize;
- u64 actual_end;
- u64 isize = i_size_read(inode);
struct btrfs_key ins;
struct extent_map *em;
struct extent_map_tree *em_tree = &BTRFS_I(inode)->extent_tree;
int ret = 0;
+ BUG_ON(root == root->fs_info->tree_root);
trans = btrfs_join_transaction(root, 1);
BUG_ON(!trans);
btrfs_set_trans_block_group(trans, inode);
trans->block_rsv = &root->fs_info->delalloc_block_rsv;
- actual_end = min_t(u64, isize, end + 1);
-
num_bytes = (end - start + blocksize) & ~(blocksize - 1);
num_bytes = max(blocksize, num_bytes);
disk_num_bytes = num_bytes;
@@ -1035,10 +1026,16 @@ static noinline int run_delalloc_nocow(struct inode *inode,
int type;
int nocow;
int check_prev = 1;
+ bool nolock = false;
path = btrfs_alloc_path();
BUG_ON(!path);
- trans = btrfs_join_transaction(root, 1);
+ if (root == root->fs_info->tree_root) {
+ nolock = true;
+ trans = btrfs_join_transaction_nolock(root, 1);
+ } else {
+ trans = btrfs_join_transaction(root, 1);
+ }
BUG_ON(!trans);
cow_start = (u64)-1;
@@ -1211,8 +1208,13 @@ out_check:
BUG_ON(ret);
}
- ret = btrfs_end_transaction(trans, root);
- BUG_ON(ret);
+ if (nolock) {
+ ret = btrfs_end_transaction_nolock(trans, root);
+ BUG_ON(ret);
+ } else {
+ ret = btrfs_end_transaction(trans, root);
+ BUG_ON(ret);
+ }
btrfs_free_path(path);
return 0;
}
@@ -1289,6 +1291,8 @@ static int btrfs_set_bit_hook(struct inode *inode,
if (!(state->state & EXTENT_DELALLOC) && (*bits & EXTENT_DELALLOC)) {
struct btrfs_root *root = BTRFS_I(inode)->root;
u64 len = state->end + 1 - state->start;
+ int do_list = (root->root_key.objectid !=
+ BTRFS_ROOT_TREE_OBJECTID);
if (*bits & EXTENT_FIRST_DELALLOC)
*bits &= ~EXTENT_FIRST_DELALLOC;
@@ -1298,7 +1302,7 @@ static int btrfs_set_bit_hook(struct inode *inode,
spin_lock(&root->fs_info->delalloc_lock);
BTRFS_I(inode)->delalloc_bytes += len;
root->fs_info->delalloc_bytes += len;
- if (list_empty(&BTRFS_I(inode)->delalloc_inodes)) {
+ if (do_list && list_empty(&BTRFS_I(inode)->delalloc_inodes)) {
list_add_tail(&BTRFS_I(inode)->delalloc_inodes,
&root->fs_info->delalloc_inodes);
}
@@ -1321,6 +1325,8 @@ static int btrfs_clear_bit_hook(struct inode *inode,
if ((state->state & EXTENT_DELALLOC) && (*bits & EXTENT_DELALLOC)) {
struct btrfs_root *root = BTRFS_I(inode)->root;
u64 len = state->end + 1 - state->start;
+ int do_list = (root->root_key.objectid !=
+ BTRFS_ROOT_TREE_OBJECTID);
if (*bits & EXTENT_FIRST_DELALLOC)
*bits &= ~EXTENT_FIRST_DELALLOC;
@@ -1330,14 +1336,15 @@ static int btrfs_clear_bit_hook(struct inode *inode,
if (*bits & EXTENT_DO_ACCOUNTING)
btrfs_delalloc_release_metadata(inode, len);
- if (root->root_key.objectid != BTRFS_DATA_RELOC_TREE_OBJECTID)
+ if (root->root_key.objectid != BTRFS_DATA_RELOC_TREE_OBJECTID
+ && do_list)
btrfs_free_reserved_data_space(inode, len);
spin_lock(&root->fs_info->delalloc_lock);
root->fs_info->delalloc_bytes -= len;
BTRFS_I(inode)->delalloc_bytes -= len;
- if (BTRFS_I(inode)->delalloc_bytes == 0 &&
+ if (do_list && BTRFS_I(inode)->delalloc_bytes == 0 &&
!list_empty(&BTRFS_I(inode)->delalloc_inodes)) {
list_del_init(&BTRFS_I(inode)->delalloc_inodes);
}
@@ -1372,7 +1379,7 @@ int btrfs_merge_bio_hook(struct page *page, unsigned long offset,
if (map_length < length + size)
return 1;
- return 0;
+ return ret;
}
/*
@@ -1426,7 +1433,10 @@ static int btrfs_submit_bio_hook(struct inode *inode, int rw, struct bio *bio,
skip_sum = BTRFS_I(inode)->flags & BTRFS_INODE_NODATASUM;
- ret = btrfs_bio_wq_end_io(root->fs_info, bio, 0);
+ if (root == root->fs_info->tree_root)
+ ret = btrfs_bio_wq_end_io(root->fs_info, bio, 2);
+ else
+ ret = btrfs_bio_wq_end_io(root->fs_info, bio, 0);
BUG_ON(ret);
if (!(rw & REQ_WRITE)) {
@@ -1662,6 +1672,7 @@ static int btrfs_finish_ordered_io(struct inode *inode, u64 start, u64 end)
struct extent_state *cached_state = NULL;
int compressed = 0;
int ret;
+ bool nolock = false;
ret = btrfs_dec_test_ordered_pending(inode, &ordered_extent, start,
end - start + 1);
@@ -1669,11 +1680,17 @@ static int btrfs_finish_ordered_io(struct inode *inode, u64 start, u64 end)
return 0;
BUG_ON(!ordered_extent);
+ nolock = (root == root->fs_info->tree_root);
+
if (test_bit(BTRFS_ORDERED_NOCOW, &ordered_extent->flags)) {
BUG_ON(!list_empty(&ordered_extent->list));
ret = btrfs_ordered_update_i_size(inode, 0, ordered_extent);
if (!ret) {
- trans = btrfs_join_transaction(root, 1);
+ if (nolock)
+ trans = btrfs_join_transaction_nolock(root, 1);
+ else
+ trans = btrfs_join_transaction(root, 1);
+ BUG_ON(!trans);
btrfs_set_trans_block_group(trans, inode);
trans->block_rsv = &root->fs_info->delalloc_block_rsv;
ret = btrfs_update_inode(trans, root, inode);
@@ -1686,7 +1703,10 @@ static int btrfs_finish_ordered_io(struct inode *inode, u64 start, u64 end)
ordered_extent->file_offset + ordered_extent->len - 1,
0, &cached_state, GFP_NOFS);
- trans = btrfs_join_transaction(root, 1);
+ if (nolock)
+ trans = btrfs_join_transaction_nolock(root, 1);
+ else
+ trans = btrfs_join_transaction(root, 1);
btrfs_set_trans_block_group(trans, inode);
trans->block_rsv = &root->fs_info->delalloc_block_rsv;
@@ -1700,6 +1720,7 @@ static int btrfs_finish_ordered_io(struct inode *inode, u64 start, u64 end)
ordered_extent->len);
BUG_ON(ret);
} else {
+ BUG_ON(root == root->fs_info->tree_root);
ret = insert_reserved_file_extent(trans, inode,
ordered_extent->file_offset,
ordered_extent->start,
@@ -1724,9 +1745,15 @@ static int btrfs_finish_ordered_io(struct inode *inode, u64 start, u64 end)
ret = btrfs_update_inode(trans, root, inode);
BUG_ON(ret);
out:
- btrfs_delalloc_release_metadata(inode, ordered_extent->len);
- if (trans)
- btrfs_end_transaction(trans, root);
+ if (nolock) {
+ if (trans)
+ btrfs_end_transaction_nolock(trans, root);
+ } else {
+ btrfs_delalloc_release_metadata(inode, ordered_extent->len);
+ if (trans)
+ btrfs_end_transaction(trans, root);
+ }
+
/* once for us */
btrfs_put_ordered_extent(ordered_extent);
/* once for the tree */
@@ -2237,7 +2264,6 @@ void btrfs_orphan_cleanup(struct btrfs_root *root)
{
struct btrfs_path *path;
struct extent_buffer *leaf;
- struct btrfs_item *item;
struct btrfs_key key, found_key;
struct btrfs_trans_handle *trans;
struct inode *inode;
@@ -2275,7 +2301,6 @@ void btrfs_orphan_cleanup(struct btrfs_root *root)
/* pull out the item */
leaf = path->nodes[0];
- item = btrfs_item_nr(leaf, path->slots[0]);
btrfs_item_key_to_cpu(leaf, &found_key, path->slots[0]);
/* make sure the item matches what we want */
@@ -2651,7 +2676,8 @@ int btrfs_unlink_inode(struct btrfs_trans_handle *trans,
ret = btrfs_del_dir_entries_in_log(trans, root, name, name_len,
dir, index);
- BUG_ON(ret);
+ if (ret == -ENOENT)
+ ret = 0;
err:
btrfs_free_path(path);
if (ret)
@@ -2672,8 +2698,8 @@ static int check_path_shared(struct btrfs_root *root,
{
struct extent_buffer *eb;
int level;
- int ret;
u64 refs = 1;
+ int uninitialized_var(ret);
for (level = 0; level < BTRFS_MAX_LEVEL; level++) {
if (!path->nodes[level])
@@ -2686,7 +2712,7 @@ static int check_path_shared(struct btrfs_root *root,
if (refs > 1)
return 1;
}
- return 0;
+ return ret; /* XXX callers? */
}
/*
@@ -3196,7 +3222,7 @@ int btrfs_truncate_inode_items(struct btrfs_trans_handle *trans,
BUG_ON(new_size > 0 && min_type != BTRFS_EXTENT_DATA_KEY);
- if (root->ref_cows)
+ if (root->ref_cows || root == root->fs_info->tree_root)
btrfs_drop_extent_cache(inode, new_size & (~mask), (u64)-1, 0);
path = btrfs_alloc_path();
@@ -3344,7 +3370,8 @@ delete:
} else {
break;
}
- if (found_extent && root->ref_cows) {
+ if (found_extent && (root->ref_cows ||
+ root == root->fs_info->tree_root)) {
btrfs_set_path_blocking(path);
ret = btrfs_free_extent(trans, root, extent_start,
extent_num_bytes, 0,
@@ -3675,7 +3702,8 @@ void btrfs_evict_inode(struct inode *inode)
int ret;
truncate_inode_pages(&inode->i_data, 0);
- if (inode->i_nlink && btrfs_root_refs(&root->root_item) != 0)
+ if (inode->i_nlink && (btrfs_root_refs(&root->root_item) != 0 ||
+ root == root->fs_info->tree_root))
goto no_delete;
if (is_bad_inode(inode)) {
@@ -3888,7 +3916,14 @@ static void inode_tree_del(struct inode *inode)
}
spin_unlock(&root->inode_lock);
- if (empty && btrfs_root_refs(&root->root_item) == 0) {
+ /*
+ * Free space cache has inodes in the tree root, but the tree root has a
+ * root_refs of 0, so this could end up dropping the tree root as a
+ * snapshot, so we need the extra !root->fs_info->tree_root check to
+ * make sure we don't drop it.
+ */
+ if (empty && btrfs_root_refs(&root->root_item) == 0 &&
+ root != root->fs_info->tree_root) {
synchronize_srcu(&root->fs_info->subvol_srcu);
spin_lock(&root->inode_lock);
empty = RB_EMPTY_ROOT(&root->inode_tree);
@@ -4282,14 +4317,24 @@ int btrfs_write_inode(struct inode *inode, struct writeback_control *wbc)
struct btrfs_root *root = BTRFS_I(inode)->root;
struct btrfs_trans_handle *trans;
int ret = 0;
+ bool nolock = false;
if (BTRFS_I(inode)->dummy_inode)
return 0;
+ smp_mb();
+ nolock = (root->fs_info->closing && root == root->fs_info->tree_root);
+
if (wbc->sync_mode == WB_SYNC_ALL) {
- trans = btrfs_join_transaction(root, 1);
+ if (nolock)
+ trans = btrfs_join_transaction_nolock(root, 1);
+ else
+ trans = btrfs_join_transaction(root, 1);
btrfs_set_trans_block_group(trans, inode);
- ret = btrfs_commit_transaction(trans, root);
+ if (nolock)
+ ret = btrfs_end_transaction_nolock(trans, root);
+ else
+ ret = btrfs_commit_transaction(trans, root);
}
return ret;
}
@@ -5645,7 +5690,6 @@ static void btrfs_submit_direct(int rw, struct bio *bio, struct inode *inode,
struct btrfs_root *root = BTRFS_I(inode)->root;
struct btrfs_dio_private *dip;
struct bio_vec *bvec = bio->bi_io_vec;
- u64 start;
int skip_sum;
int write = rw & REQ_WRITE;
int ret = 0;
@@ -5671,7 +5715,6 @@ static void btrfs_submit_direct(int rw, struct bio *bio, struct inode *inode,
dip->inode = inode;
dip->logical_offset = file_offset;
- start = dip->logical_offset;
dip->bytes = 0;
do {
dip->bytes += bvec->bv_len;
@@ -6308,6 +6351,21 @@ void btrfs_destroy_inode(struct inode *inode)
spin_unlock(&root->fs_info->ordered_extent_lock);
}
+ if (root == root->fs_info->tree_root) {
+ struct btrfs_block_group_cache *block_group;
+
+ block_group = btrfs_lookup_block_group(root->fs_info,
+ BTRFS_I(inode)->block_group);
+ if (block_group && block_group->inode == inode) {
+ spin_lock(&block_group->lock);
+ block_group->inode = NULL;
+ spin_unlock(&block_group->lock);
+ btrfs_put_block_group(block_group);
+ } else if (block_group) {
+ btrfs_put_block_group(block_group);
+ }
+ }
+
spin_lock(&root->orphan_lock);
if (!list_empty(&BTRFS_I(inode)->i_orphan)) {
printk(KERN_INFO "BTRFS: inode %lu still on the orphan list\n",
@@ -6340,7 +6398,8 @@ int btrfs_drop_inode(struct inode *inode)
{
struct btrfs_root *root = BTRFS_I(inode)->root;
- if (btrfs_root_refs(&root->root_item) == 0)
+ if (btrfs_root_refs(&root->root_item) == 0 &&
+ root != root->fs_info->tree_root)
return 1;
else
return generic_drop_inode(inode);
@@ -6609,7 +6668,8 @@ int btrfs_start_delalloc_inodes(struct btrfs_root *root, int delay_iput)
return 0;
}
-int btrfs_start_one_delalloc_inode(struct btrfs_root *root, int delay_iput)
+int btrfs_start_one_delalloc_inode(struct btrfs_root *root, int delay_iput,
+ int sync)
{
struct btrfs_inode *binode;
struct inode *inode = NULL;
@@ -6631,7 +6691,26 @@ int btrfs_start_one_delalloc_inode(struct btrfs_root *root, int delay_iput)
spin_unlock(&root->fs_info->delalloc_lock);
if (inode) {
- write_inode_now(inode, 0);
+ if (sync) {
+ filemap_write_and_wait(inode->i_mapping);
+ /*
+ * We have to do this because compression doesn't
+ * actually set PG_writeback until it submits the pages
+ * for IO, which happens in an async thread, so we could
+ * race and not actually wait for any writeback pages
+ * because they've not been submitted yet. Technically
+ * this could still be the case for the ordered stuff
+ * since the async thread may not have started to do its
+ * work yet. If this becomes the case then we need to
+ * figure out a way to make sure that in writepage we
+ * wait for any async pages to be submitted before
+ * returning so that fdatawait does what its supposed to
+ * do.
+ */
+ btrfs_wait_ordered_range(inode, 0, (u64)-1);
+ } else {
+ filemap_flush(inode->i_mapping);
+ }
if (delay_iput)
btrfs_add_delayed_iput(inode);
else
@@ -6757,27 +6836,33 @@ out_unlock:
return err;
}
-int btrfs_prealloc_file_range(struct inode *inode, int mode,
- u64 start, u64 num_bytes, u64 min_size,
- loff_t actual_len, u64 *alloc_hint)
+static int __btrfs_prealloc_file_range(struct inode *inode, int mode,
+ u64 start, u64 num_bytes, u64 min_size,
+ loff_t actual_len, u64 *alloc_hint,
+ struct btrfs_trans_handle *trans)
{
- struct btrfs_trans_handle *trans;
struct btrfs_root *root = BTRFS_I(inode)->root;
struct btrfs_key ins;
u64 cur_offset = start;
int ret = 0;
+ bool own_trans = true;
+ if (trans)
+ own_trans = false;
while (num_bytes > 0) {
- trans = btrfs_start_transaction(root, 3);
- if (IS_ERR(trans)) {
- ret = PTR_ERR(trans);
- break;
+ if (own_trans) {
+ trans = btrfs_start_transaction(root, 3);
+ if (IS_ERR(trans)) {
+ ret = PTR_ERR(trans);
+ break;
+ }
}
ret = btrfs_reserve_extent(trans, root, num_bytes, min_size,
0, *alloc_hint, (u64)-1, &ins, 1);
if (ret) {
- btrfs_end_transaction(trans, root);
+ if (own_trans)
+ btrfs_end_transaction(trans, root);
break;
}
@@ -6810,11 +6895,30 @@ int btrfs_prealloc_file_range(struct inode *inode, int mode,
ret = btrfs_update_inode(trans, root, inode);
BUG_ON(ret);
- btrfs_end_transaction(trans, root);
+ if (own_trans)
+ btrfs_end_transaction(trans, root);
}
return ret;
}
+int btrfs_prealloc_file_range(struct inode *inode, int mode,
+ u64 start, u64 num_bytes, u64 min_size,
+ loff_t actual_len, u64 *alloc_hint)
+{
+ return __btrfs_prealloc_file_range(inode, mode, start, num_bytes,
+ min_size, actual_len, alloc_hint,
+ NULL);
+}
+
+int btrfs_prealloc_file_range_trans(struct inode *inode,
+ struct btrfs_trans_handle *trans, int mode,
+ u64 start, u64 num_bytes, u64 min_size,
+ loff_t actual_len, u64 *alloc_hint)
+{
+ return __btrfs_prealloc_file_range(inode, mode, start, num_bytes,
+ min_size, actual_len, alloc_hint, trans);
+}
+
static long btrfs_fallocate(struct inode *inode, int mode,
loff_t offset, loff_t len)
{
diff --git a/fs/btrfs/ioctl.c b/fs/btrfs/ioctl.c
index 9254b3d58db..463d91b4dd3 100644
--- a/fs/btrfs/ioctl.c
+++ b/fs/btrfs/ioctl.c
@@ -224,7 +224,8 @@ static int btrfs_ioctl_getversion(struct file *file, int __user *arg)
static noinline int create_subvol(struct btrfs_root *root,
struct dentry *dentry,
- char *name, int namelen)
+ char *name, int namelen,
+ u64 *async_transid)
{
struct btrfs_trans_handle *trans;
struct btrfs_key key;
@@ -338,13 +339,19 @@ static noinline int create_subvol(struct btrfs_root *root,
d_instantiate(dentry, btrfs_lookup_dentry(dir, dentry));
fail:
- err = btrfs_commit_transaction(trans, root);
+ if (async_transid) {
+ *async_transid = trans->transid;
+ err = btrfs_commit_transaction_async(trans, root, 1);
+ } else {
+ err = btrfs_commit_transaction(trans, root);
+ }
if (err && !ret)
ret = err;
return ret;
}
-static int create_snapshot(struct btrfs_root *root, struct dentry *dentry)
+static int create_snapshot(struct btrfs_root *root, struct dentry *dentry,
+ char *name, int namelen, u64 *async_transid)
{
struct inode *inode;
struct btrfs_pending_snapshot *pending_snapshot;
@@ -373,7 +380,14 @@ static int create_snapshot(struct btrfs_root *root, struct dentry *dentry)
list_add(&pending_snapshot->list,
&trans->transaction->pending_snapshots);
- ret = btrfs_commit_transaction(trans, root->fs_info->extent_root);
+ if (async_transid) {
+ *async_transid = trans->transid;
+ ret = btrfs_commit_transaction_async(trans,
+ root->fs_info->extent_root, 1);
+ } else {
+ ret = btrfs_commit_transaction(trans,
+ root->fs_info->extent_root);
+ }
BUG_ON(ret);
ret = pending_snapshot->error;
@@ -395,6 +409,76 @@ fail:
return ret;
}
+/* copy of check_sticky in fs/namei.c()
+* It's inline, so penalty for filesystems that don't use sticky bit is
+* minimal.
+*/
+static inline int btrfs_check_sticky(struct inode *dir, struct inode *inode)
+{
+ uid_t fsuid = current_fsuid();
+
+ if (!(dir->i_mode & S_ISVTX))
+ return 0;
+ if (inode->i_uid == fsuid)
+ return 0;
+ if (dir->i_uid == fsuid)
+ return 0;
+ return !capable(CAP_FOWNER);
+}
+
+/* copy of may_delete in fs/namei.c()
+ * Check whether we can remove a link victim from directory dir, check
+ * whether the type of victim is right.
+ * 1. We can't do it if dir is read-only (done in permission())
+ * 2. We should have write and exec permissions on dir
+ * 3. We can't remove anything from append-only dir
+ * 4. We can't do anything with immutable dir (done in permission())
+ * 5. If the sticky bit on dir is set we should either
+ * a. be owner of dir, or
+ * b. be owner of victim, or
+ * c. have CAP_FOWNER capability
+ * 6. If the victim is append-only or immutable we can't do antyhing with
+ * links pointing to it.
+ * 7. If we were asked to remove a directory and victim isn't one - ENOTDIR.
+ * 8. If we were asked to remove a non-directory and victim isn't one - EISDIR.
+ * 9. We can't remove a root or mountpoint.
+ * 10. We don't allow removal of NFS sillyrenamed files; it's handled by
+ * nfs_async_unlink().
+ */
+
+static int btrfs_may_delete(struct inode *dir,struct dentry *victim,int isdir)
+{
+ int error;
+
+ if (!victim->d_inode)
+ return -ENOENT;
+
+ BUG_ON(victim->d_parent->d_inode != dir);
+ audit_inode_child(victim, dir);
+
+ error = inode_permission(dir, MAY_WRITE | MAY_EXEC);
+ if (error)
+ return error;
+ if (IS_APPEND(dir))
+ return -EPERM;
+ if (btrfs_check_sticky(dir, victim->d_inode)||
+ IS_APPEND(victim->d_inode)||
+ IS_IMMUTABLE(victim->d_inode) || IS_SWAPFILE(victim->d_inode))
+ return -EPERM;
+ if (isdir) {
+ if (!S_ISDIR(victim->d_inode->i_mode))
+ return -ENOTDIR;
+ if (IS_ROOT(victim))
+ return -EBUSY;
+ } else if (S_ISDIR(victim->d_inode->i_mode))
+ return -EISDIR;
+ if (IS_DEADDIR(dir))
+ return -ENOENT;
+ if (victim->d_flags & DCACHE_NFSFS_RENAMED)
+ return -EBUSY;
+ return 0;
+}
+
/* copy of may_create in fs/namei.c() */
static inline int btrfs_may_create(struct inode *dir, struct dentry *child)
{
@@ -412,7 +496,8 @@ static inline int btrfs_may_create(struct inode *dir, struct dentry *child)
*/
static noinline int btrfs_mksubvol(struct path *parent,
char *name, int namelen,
- struct btrfs_root *snap_src)
+ struct btrfs_root *snap_src,
+ u64 *async_transid)
{
struct inode *dir = parent->dentry->d_inode;
struct dentry *dentry;
@@ -443,10 +528,11 @@ static noinline int btrfs_mksubvol(struct path *parent,
goto out_up_read;
if (snap_src) {
- error = create_snapshot(snap_src, dentry);
+ error = create_snapshot(snap_src, dentry,
+ name, namelen, async_transid);
} else {
error = create_subvol(BTRFS_I(dir)->root, dentry,
- name, namelen);
+ name, namelen, async_transid);
}
if (!error)
fsnotify_mkdir(dir, dentry);
@@ -708,7 +794,6 @@ static noinline int btrfs_ioctl_resize(struct btrfs_root *root,
char *sizestr;
char *devstr = NULL;
int ret = 0;
- int namelen;
int mod = 0;
if (root->fs_info->sb->s_flags & MS_RDONLY)
@@ -722,7 +807,6 @@ static noinline int btrfs_ioctl_resize(struct btrfs_root *root,
return PTR_ERR(vol_args);
vol_args->name[BTRFS_PATH_NAME_MAX] = '\0';
- namelen = strlen(vol_args->name);
mutex_lock(&root->fs_info->volume_mutex);
sizestr = vol_args->name;
@@ -801,11 +885,13 @@ out_unlock:
return ret;
}
-static noinline int btrfs_ioctl_snap_create(struct file *file,
- void __user *arg, int subvol)
+static noinline int btrfs_ioctl_snap_create_transid(struct file *file,
+ char *name,
+ unsigned long fd,
+ int subvol,
+ u64 *transid)
{
struct btrfs_root *root = BTRFS_I(fdentry(file)->d_inode)->root;
- struct btrfs_ioctl_vol_args *vol_args;
struct file *src_file;
int namelen;
int ret = 0;
@@ -813,23 +899,18 @@ static noinline int btrfs_ioctl_snap_create(struct file *file,
if (root->fs_info->sb->s_flags & MS_RDONLY)
return -EROFS;
- vol_args = memdup_user(arg, sizeof(*vol_args));
- if (IS_ERR(vol_args))
- return PTR_ERR(vol_args);
-
- vol_args->name[BTRFS_PATH_NAME_MAX] = '\0';
- namelen = strlen(vol_args->name);
- if (strchr(vol_args->name, '/')) {
+ namelen = strlen(name);
+ if (strchr(name, '/')) {
ret = -EINVAL;
goto out;
}
if (subvol) {
- ret = btrfs_mksubvol(&file->f_path, vol_args->name, namelen,
- NULL);
+ ret = btrfs_mksubvol(&file->f_path, name, namelen,
+ NULL, transid);
} else {
struct inode *src_inode;
- src_file = fget(vol_args->fd);
+ src_file = fget(fd);
if (!src_file) {
ret = -EINVAL;
goto out;
@@ -843,12 +924,56 @@ static noinline int btrfs_ioctl_snap_create(struct file *file,
fput(src_file);
goto out;
}
- ret = btrfs_mksubvol(&file->f_path, vol_args->name, namelen,
- BTRFS_I(src_inode)->root);
+ ret = btrfs_mksubvol(&file->f_path, name, namelen,
+ BTRFS_I(src_inode)->root,
+ transid);
fput(src_file);
}
out:
+ return ret;
+}
+
+static noinline int btrfs_ioctl_snap_create(struct file *file,
+ void __user *arg, int subvol,
+ int async)
+{
+ struct btrfs_ioctl_vol_args *vol_args = NULL;
+ struct btrfs_ioctl_async_vol_args *async_vol_args = NULL;
+ char *name;
+ u64 fd;
+ u64 transid = 0;
+ int ret;
+
+ if (async) {
+ async_vol_args = memdup_user(arg, sizeof(*async_vol_args));
+ if (IS_ERR(async_vol_args))
+ return PTR_ERR(async_vol_args);
+
+ name = async_vol_args->name;
+ fd = async_vol_args->fd;
+ async_vol_args->name[BTRFS_SNAPSHOT_NAME_MAX] = '\0';
+ } else {
+ vol_args = memdup_user(arg, sizeof(*vol_args));
+ if (IS_ERR(vol_args))
+ return PTR_ERR(vol_args);
+ name = vol_args->name;
+ fd = vol_args->fd;
+ vol_args->name[BTRFS_PATH_NAME_MAX] = '\0';
+ }
+
+ ret = btrfs_ioctl_snap_create_transid(file, name, fd,
+ subvol, &transid);
+
+ if (!ret && async) {
+ if (copy_to_user(arg +
+ offsetof(struct btrfs_ioctl_async_vol_args,
+ transid), &transid, sizeof(transid)))
+ return -EFAULT;
+ }
+
kfree(vol_args);
+ kfree(async_vol_args);
+
return ret;
}
@@ -1073,14 +1198,10 @@ static noinline int btrfs_ioctl_tree_search(struct file *file,
if (!capable(CAP_SYS_ADMIN))
return -EPERM;
- args = kmalloc(sizeof(*args), GFP_KERNEL);
- if (!args)
- return -ENOMEM;
+ args = memdup_user(argp, sizeof(*args));
+ if (IS_ERR(args))
+ return PTR_ERR(args);
- if (copy_from_user(args, argp, sizeof(*args))) {
- kfree(args);
- return -EFAULT;
- }
inode = fdentry(file)->d_inode;
ret = search_ioctl(inode, args);
if (ret == 0 && copy_to_user(argp, args, sizeof(*args)))
@@ -1188,14 +1309,10 @@ static noinline int btrfs_ioctl_ino_lookup(struct file *file,
if (!capable(CAP_SYS_ADMIN))
return -EPERM;
- args = kmalloc(sizeof(*args), GFP_KERNEL);
- if (!args)
- return -ENOMEM;
+ args = memdup_user(argp, sizeof(*args));
+ if (IS_ERR(args))
+ return PTR_ERR(args);
- if (copy_from_user(args, argp, sizeof(*args))) {
- kfree(args);
- return -EFAULT;
- }
inode = fdentry(file)->d_inode;
if (args->treeid == 0)
@@ -1227,9 +1344,6 @@ static noinline int btrfs_ioctl_snap_destroy(struct file *file,
int ret;
int err = 0;
- if (!capable(CAP_SYS_ADMIN))
- return -EPERM;
-
vol_args = memdup_user(arg, sizeof(*vol_args));
if (IS_ERR(vol_args))
return PTR_ERR(vol_args);
@@ -1259,13 +1373,51 @@ static noinline int btrfs_ioctl_snap_destroy(struct file *file,
}
inode = dentry->d_inode;
+ dest = BTRFS_I(inode)->root;
+ if (!capable(CAP_SYS_ADMIN)){
+ /*
+ * Regular user. Only allow this with a special mount
+ * option, when the user has write+exec access to the
+ * subvol root, and when rmdir(2) would have been
+ * allowed.
+ *
+ * Note that this is _not_ check that the subvol is
+ * empty or doesn't contain data that we wouldn't
+ * otherwise be able to delete.
+ *
+ * Users who want to delete empty subvols should try
+ * rmdir(2).
+ */
+ err = -EPERM;
+ if (!btrfs_test_opt(root, USER_SUBVOL_RM_ALLOWED))
+ goto out_dput;
+
+ /*
+ * Do not allow deletion if the parent dir is the same
+ * as the dir to be deleted. That means the ioctl
+ * must be called on the dentry referencing the root
+ * of the subvol, not a random directory contained
+ * within it.
+ */
+ err = -EINVAL;
+ if (root == dest)
+ goto out_dput;
+
+ err = inode_permission(inode, MAY_WRITE | MAY_EXEC);
+ if (err)
+ goto out_dput;
+
+ /* check if subvolume may be deleted by a non-root user */
+ err = btrfs_may_delete(dir, dentry, 1);
+ if (err)
+ goto out_dput;
+ }
+
if (inode->i_ino != BTRFS_FIRST_FREE_OBJECTID) {
err = -EINVAL;
goto out_dput;
}
- dest = BTRFS_I(inode)->root;
-
mutex_lock(&inode->i_mutex);
err = d_invalidate(dentry);
if (err)
@@ -1304,7 +1456,7 @@ static noinline int btrfs_ioctl_snap_destroy(struct file *file,
BUG_ON(ret);
}
- ret = btrfs_commit_transaction(trans, root);
+ ret = btrfs_end_transaction(trans, root);
BUG_ON(ret);
inode->i_flags |= S_DEAD;
out_up_write:
@@ -1502,11 +1654,11 @@ static noinline long btrfs_ioctl_clone(struct file *file, unsigned long srcfd,
path->reada = 2;
if (inode < src) {
- mutex_lock(&inode->i_mutex);
- mutex_lock(&src->i_mutex);
+ mutex_lock_nested(&inode->i_mutex, I_MUTEX_PARENT);
+ mutex_lock_nested(&src->i_mutex, I_MUTEX_CHILD);
} else {
- mutex_lock(&src->i_mutex);
- mutex_lock(&inode->i_mutex);
+ mutex_lock_nested(&src->i_mutex, I_MUTEX_PARENT);
+ mutex_lock_nested(&inode->i_mutex, I_MUTEX_CHILD);
}
/* determine range to clone */
@@ -1530,13 +1682,15 @@ static noinline long btrfs_ioctl_clone(struct file *file, unsigned long srcfd,
while (1) {
struct btrfs_ordered_extent *ordered;
lock_extent(&BTRFS_I(src)->io_tree, off, off+len, GFP_NOFS);
- ordered = btrfs_lookup_first_ordered_extent(inode, off+len);
- if (BTRFS_I(src)->delalloc_bytes == 0 && !ordered)
+ ordered = btrfs_lookup_first_ordered_extent(src, off+len);
+ if (!ordered &&
+ !test_range_bit(&BTRFS_I(src)->io_tree, off, off+len,
+ EXTENT_DELALLOC, 0, NULL))
break;
unlock_extent(&BTRFS_I(src)->io_tree, off, off+len, GFP_NOFS);
if (ordered)
btrfs_put_ordered_extent(ordered);
- btrfs_wait_ordered_range(src, off, off+len);
+ btrfs_wait_ordered_range(src, off, len);
}
/* clone data */
@@ -1605,7 +1759,7 @@ static noinline long btrfs_ioctl_clone(struct file *file, unsigned long srcfd,
}
btrfs_release_path(root, path);
- if (key.offset + datal < off ||
+ if (key.offset + datal <= off ||
key.offset >= off+len)
goto next;
@@ -1879,6 +2033,22 @@ static long btrfs_ioctl_default_subvol(struct file *file, void __user *argp)
return 0;
}
+static void get_block_group_info(struct list_head *groups_list,
+ struct btrfs_ioctl_space_info *space)
+{
+ struct btrfs_block_group_cache *block_group;
+
+ space->total_bytes = 0;
+ space->used_bytes = 0;
+ space->flags = 0;
+ list_for_each_entry(block_group, groups_list, list) {
+ space->flags = block_group->flags;
+ space->total_bytes += block_group->key.offset;
+ space->used_bytes +=
+ btrfs_block_group_used(&block_group->item);
+ }
+}
+
long btrfs_ioctl_space_info(struct btrfs_root *root, void __user *arg)
{
struct btrfs_ioctl_space_args space_args;
@@ -1887,27 +2057,56 @@ long btrfs_ioctl_space_info(struct btrfs_root *root, void __user *arg)
struct btrfs_ioctl_space_info *dest_orig;
struct btrfs_ioctl_space_info *user_dest;
struct btrfs_space_info *info;
+ u64 types[] = {BTRFS_BLOCK_GROUP_DATA,
+ BTRFS_BLOCK_GROUP_SYSTEM,
+ BTRFS_BLOCK_GROUP_METADATA,
+ BTRFS_BLOCK_GROUP_DATA | BTRFS_BLOCK_GROUP_METADATA};
+ int num_types = 4;
int alloc_size;
int ret = 0;
int slot_count = 0;
+ int i, c;
if (copy_from_user(&space_args,
(struct btrfs_ioctl_space_args __user *)arg,
sizeof(space_args)))
return -EFAULT;
- /* first we count slots */
- rcu_read_lock();
- list_for_each_entry_rcu(info, &root->fs_info->space_info, list)
- slot_count++;
- rcu_read_unlock();
+ for (i = 0; i < num_types; i++) {
+ struct btrfs_space_info *tmp;
+
+ info = NULL;
+ rcu_read_lock();
+ list_for_each_entry_rcu(tmp, &root->fs_info->space_info,
+ list) {
+ if (tmp->flags == types[i]) {
+ info = tmp;
+ break;
+ }
+ }
+ rcu_read_unlock();
+
+ if (!info)
+ continue;
+
+ down_read(&info->groups_sem);
+ for (c = 0; c < BTRFS_NR_RAID_TYPES; c++) {
+ if (!list_empty(&info->block_groups[c]))
+ slot_count++;
+ }
+ up_read(&info->groups_sem);
+ }
/* space_slots == 0 means they are asking for a count */
if (space_args.space_slots == 0) {
space_args.total_spaces = slot_count;
goto out;
}
+
+ slot_count = min_t(int, space_args.space_slots, slot_count);
+
alloc_size = sizeof(*dest) * slot_count;
+
/* we generally have at most 6 or so space infos, one for each raid
* level. So, a whole page should be more than enough for everyone
*/
@@ -1921,27 +2120,34 @@ long btrfs_ioctl_space_info(struct btrfs_root *root, void __user *arg)
dest_orig = dest;
/* now we have a buffer to copy into */
- rcu_read_lock();
- list_for_each_entry_rcu(info, &root->fs_info->space_info, list) {
- /* make sure we don't copy more than we allocated
- * in our buffer
- */
- if (slot_count == 0)
- break;
- slot_count--;
-
- /* make sure userland has enough room in their buffer */
- if (space_args.total_spaces >= space_args.space_slots)
- break;
+ for (i = 0; i < num_types; i++) {
+ struct btrfs_space_info *tmp;
+
+ info = NULL;
+ rcu_read_lock();
+ list_for_each_entry_rcu(tmp, &root->fs_info->space_info,
+ list) {
+ if (tmp->flags == types[i]) {
+ info = tmp;
+ break;
+ }
+ }
+ rcu_read_unlock();
- space.flags = info->flags;
- space.total_bytes = info->total_bytes;
- space.used_bytes = info->bytes_used;
- memcpy(dest, &space, sizeof(space));
- dest++;
- space_args.total_spaces++;
+ if (!info)
+ continue;
+ down_read(&info->groups_sem);
+ for (c = 0; c < BTRFS_NR_RAID_TYPES; c++) {
+ if (!list_empty(&info->block_groups[c])) {
+ get_block_group_info(&info->block_groups[c],
+ &space);
+ memcpy(dest, &space, sizeof(space));
+ dest++;
+ space_args.total_spaces++;
+ }
+ }
+ up_read(&info->groups_sem);
}
- rcu_read_unlock();
user_dest = (struct btrfs_ioctl_space_info *)
(arg + sizeof(struct btrfs_ioctl_space_args));
@@ -1984,6 +2190,36 @@ long btrfs_ioctl_trans_end(struct file *file)
return 0;
}
+static noinline long btrfs_ioctl_start_sync(struct file *file, void __user *argp)
+{
+ struct btrfs_root *root = BTRFS_I(file->f_dentry->d_inode)->root;
+ struct btrfs_trans_handle *trans;
+ u64 transid;
+
+ trans = btrfs_start_transaction(root, 0);
+ transid = trans->transid;
+ btrfs_commit_transaction_async(trans, root, 0);
+
+ if (argp)
+ if (copy_to_user(argp, &transid, sizeof(transid)))
+ return -EFAULT;
+ return 0;
+}
+
+static noinline long btrfs_ioctl_wait_sync(struct file *file, void __user *argp)
+{
+ struct btrfs_root *root = BTRFS_I(file->f_dentry->d_inode)->root;
+ u64 transid;
+
+ if (argp) {
+ if (copy_from_user(&transid, argp, sizeof(transid)))
+ return -EFAULT;
+ } else {
+ transid = 0; /* current trans */
+ }
+ return btrfs_wait_for_commit(root, transid);
+}
+
long btrfs_ioctl(struct file *file, unsigned int
cmd, unsigned long arg)
{
@@ -1998,9 +2234,11 @@ long btrfs_ioctl(struct file *file, unsigned int
case FS_IOC_GETVERSION:
return btrfs_ioctl_getversion(file, argp);
case BTRFS_IOC_SNAP_CREATE:
- return btrfs_ioctl_snap_create(file, argp, 0);
+ return btrfs_ioctl_snap_create(file, argp, 0, 0);
+ case BTRFS_IOC_SNAP_CREATE_ASYNC:
+ return btrfs_ioctl_snap_create(file, argp, 0, 1);
case BTRFS_IOC_SUBVOL_CREATE:
- return btrfs_ioctl_snap_create(file, argp, 1);
+ return btrfs_ioctl_snap_create(file, argp, 1, 0);
case BTRFS_IOC_SNAP_DESTROY:
return btrfs_ioctl_snap_destroy(file, argp);
case BTRFS_IOC_DEFAULT_SUBVOL:
@@ -2034,6 +2272,10 @@ long btrfs_ioctl(struct file *file, unsigned int
case BTRFS_IOC_SYNC:
btrfs_sync_fs(file->f_dentry->d_sb, 1);
return 0;
+ case BTRFS_IOC_START_SYNC:
+ return btrfs_ioctl_start_sync(file, argp);
+ case BTRFS_IOC_WAIT_SYNC:
+ return btrfs_ioctl_wait_sync(file, argp);
}
return -ENOTTY;
diff --git a/fs/btrfs/ioctl.h b/fs/btrfs/ioctl.h
index 424694aa517..17c99ebdf96 100644
--- a/fs/btrfs/ioctl.h
+++ b/fs/btrfs/ioctl.h
@@ -22,14 +22,21 @@
#define BTRFS_IOCTL_MAGIC 0x94
#define BTRFS_VOL_NAME_MAX 255
-#define BTRFS_PATH_NAME_MAX 4087
/* this should be 4k */
+#define BTRFS_PATH_NAME_MAX 4087
struct btrfs_ioctl_vol_args {
__s64 fd;
char name[BTRFS_PATH_NAME_MAX + 1];
};
+#define BTRFS_SNAPSHOT_NAME_MAX 4079
+struct btrfs_ioctl_async_vol_args {
+ __s64 fd;
+ __u64 transid;
+ char name[BTRFS_SNAPSHOT_NAME_MAX + 1];
+};
+
#define BTRFS_INO_LOOKUP_PATH_MAX 4080
struct btrfs_ioctl_ino_lookup_args {
__u64 treeid;
@@ -178,4 +185,8 @@ struct btrfs_ioctl_space_args {
#define BTRFS_IOC_DEFAULT_SUBVOL _IOW(BTRFS_IOCTL_MAGIC, 19, u64)
#define BTRFS_IOC_SPACE_INFO _IOWR(BTRFS_IOCTL_MAGIC, 20, \
struct btrfs_ioctl_space_args)
+#define BTRFS_IOC_START_SYNC _IOR(BTRFS_IOCTL_MAGIC, 24, __u64)
+#define BTRFS_IOC_WAIT_SYNC _IOW(BTRFS_IOCTL_MAGIC, 22, __u64)
+#define BTRFS_IOC_SNAP_CREATE_ASYNC _IOW(BTRFS_IOCTL_MAGIC, 23, \
+ struct btrfs_ioctl_async_vol_args)
#endif
diff --git a/fs/btrfs/ordered-data.c b/fs/btrfs/ordered-data.c
index e56c72bc5ad..f4621f6deca 100644
--- a/fs/btrfs/ordered-data.c
+++ b/fs/btrfs/ordered-data.c
@@ -526,7 +526,6 @@ int btrfs_wait_ordered_range(struct inode *inode, u64 start, u64 len)
{
u64 end;
u64 orig_end;
- u64 wait_end;
struct btrfs_ordered_extent *ordered;
int found;
@@ -537,7 +536,6 @@ int btrfs_wait_ordered_range(struct inode *inode, u64 start, u64 len)
if (orig_end > INT_LIMIT(loff_t))
orig_end = INT_LIMIT(loff_t);
}
- wait_end = orig_end;
again:
/* start IO across the range first to instantiate any delalloc
* extents
diff --git a/fs/btrfs/relocation.c b/fs/btrfs/relocation.c
index b37d723b9d4..045c9c2b2d7 100644
--- a/fs/btrfs/relocation.c
+++ b/fs/btrfs/relocation.c
@@ -29,6 +29,7 @@
#include "locking.h"
#include "btrfs_inode.h"
#include "async-thread.h"
+#include "free-space-cache.h"
/*
* backref_node, mapping_node and tree_block start with this
@@ -178,8 +179,6 @@ struct reloc_control {
u64 search_start;
u64 extents_found;
- int block_rsv_retries;
-
unsigned int stage:8;
unsigned int create_reloc_tree:1;
unsigned int merge_reloc_tree:1;
@@ -2133,7 +2132,6 @@ int prepare_to_merge(struct reloc_control *rc, int err)
LIST_HEAD(reloc_roots);
u64 num_bytes = 0;
int ret;
- int retries = 0;
mutex_lock(&root->fs_info->trans_mutex);
rc->merging_rsv_size += root->nodesize * (BTRFS_MAX_LEVEL - 1) * 2;
@@ -2143,7 +2141,7 @@ again:
if (!err) {
num_bytes = rc->merging_rsv_size;
ret = btrfs_block_rsv_add(NULL, root, rc->block_rsv,
- num_bytes, &retries);
+ num_bytes);
if (ret)
err = ret;
}
@@ -2155,7 +2153,6 @@ again:
btrfs_end_transaction(trans, rc->extent_root);
btrfs_block_rsv_release(rc->extent_root,
rc->block_rsv, num_bytes);
- retries = 0;
goto again;
}
}
@@ -2405,15 +2402,13 @@ static int reserve_metadata_space(struct btrfs_trans_handle *trans,
num_bytes = calcu_metadata_size(rc, node, 1) * 2;
trans->block_rsv = rc->block_rsv;
- ret = btrfs_block_rsv_add(trans, root, rc->block_rsv, num_bytes,
- &rc->block_rsv_retries);
+ ret = btrfs_block_rsv_add(trans, root, rc->block_rsv, num_bytes);
if (ret) {
if (ret == -EAGAIN)
rc->commit_transaction = 1;
return ret;
}
- rc->block_rsv_retries = 0;
return 0;
}
@@ -3099,6 +3094,8 @@ static int add_tree_block(struct reloc_control *rc,
BUG_ON(item_size != sizeof(struct btrfs_extent_item_v0));
ret = get_ref_objectid_v0(rc, path, extent_key,
&ref_owner, NULL);
+ if (ret < 0)
+ return ret;
BUG_ON(ref_owner >= BTRFS_MAX_LEVEL);
level = (int)ref_owner;
/* FIXME: get real generation */
@@ -3191,6 +3188,54 @@ static int block_use_full_backref(struct reloc_control *rc,
return ret;
}
+static int delete_block_group_cache(struct btrfs_fs_info *fs_info,
+ struct inode *inode, u64 ino)
+{
+ struct btrfs_key key;
+ struct btrfs_path *path;
+ struct btrfs_root *root = fs_info->tree_root;
+ struct btrfs_trans_handle *trans;
+ unsigned long nr;
+ int ret = 0;
+
+ if (inode)
+ goto truncate;
+
+ key.objectid = ino;
+ key.type = BTRFS_INODE_ITEM_KEY;
+ key.offset = 0;
+
+ inode = btrfs_iget(fs_info->sb, &key, root, NULL);
+ if (!inode || IS_ERR(inode) || is_bad_inode(inode)) {
+ if (inode && !IS_ERR(inode))
+ iput(inode);
+ return -ENOENT;
+ }
+
+truncate:
+ path = btrfs_alloc_path();
+ if (!path) {
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ trans = btrfs_join_transaction(root, 0);
+ if (IS_ERR(trans)) {
+ btrfs_free_path(path);
+ goto out;
+ }
+
+ ret = btrfs_truncate_free_space_cache(root, trans, path, inode);
+
+ btrfs_free_path(path);
+ nr = trans->blocks_used;
+ btrfs_end_transaction(trans, root);
+ btrfs_btree_balance_dirty(root, nr);
+out:
+ iput(inode);
+ return ret;
+}
+
/*
* helper to add tree blocks for backref of type BTRFS_EXTENT_DATA_REF_KEY
* this function scans fs tree to find blocks reference the data extent
@@ -3217,15 +3262,27 @@ static int find_data_references(struct reloc_control *rc,
int counted;
int ret;
- path = btrfs_alloc_path();
- if (!path)
- return -ENOMEM;
-
ref_root = btrfs_extent_data_ref_root(leaf, ref);
ref_objectid = btrfs_extent_data_ref_objectid(leaf, ref);
ref_offset = btrfs_extent_data_ref_offset(leaf, ref);
ref_count = btrfs_extent_data_ref_count(leaf, ref);
+ /*
+ * This is an extent belonging to the free space cache, lets just delete
+ * it and redo the search.
+ */
+ if (ref_root == BTRFS_ROOT_TREE_OBJECTID) {
+ ret = delete_block_group_cache(rc->extent_root->fs_info,
+ NULL, ref_objectid);
+ if (ret != -ENOENT)
+ return ret;
+ ret = 0;
+ }
+
+ path = btrfs_alloc_path();
+ if (!path)
+ return -ENOMEM;
+
root = read_fs_root(rc->extent_root->fs_info, ref_root);
if (IS_ERR(root)) {
err = PTR_ERR(root);
@@ -3554,8 +3611,7 @@ int prepare_to_relocate(struct reloc_control *rc)
* is no reservation in transaction handle.
*/
ret = btrfs_block_rsv_add(NULL, rc->extent_root, rc->block_rsv,
- rc->extent_root->nodesize * 256,
- &rc->block_rsv_retries);
+ rc->extent_root->nodesize * 256);
if (ret)
return ret;
@@ -3567,7 +3623,6 @@ int prepare_to_relocate(struct reloc_control *rc)
rc->extents_found = 0;
rc->nodes_relocated = 0;
rc->merging_rsv_size = 0;
- rc->block_rsv_retries = 0;
rc->create_reloc_tree = 1;
set_reloc_control(rc);
@@ -3860,6 +3915,8 @@ int btrfs_relocate_block_group(struct btrfs_root *extent_root, u64 group_start)
{
struct btrfs_fs_info *fs_info = extent_root->fs_info;
struct reloc_control *rc;
+ struct inode *inode;
+ struct btrfs_path *path;
int ret;
int rw = 0;
int err = 0;
@@ -3882,6 +3939,26 @@ int btrfs_relocate_block_group(struct btrfs_root *extent_root, u64 group_start)
rw = 1;
}
+ path = btrfs_alloc_path();
+ if (!path) {
+ err = -ENOMEM;
+ goto out;
+ }
+
+ inode = lookup_free_space_inode(fs_info->tree_root, rc->block_group,
+ path);
+ btrfs_free_path(path);
+
+ if (!IS_ERR(inode))
+ ret = delete_block_group_cache(fs_info, inode, 0);
+ else
+ ret = PTR_ERR(inode);
+
+ if (ret && ret != -ENOENT) {
+ err = ret;
+ goto out;
+ }
+
rc->data_inode = create_reloc_inode(fs_info, rc->block_group);
if (IS_ERR(rc->data_inode)) {
err = PTR_ERR(rc->data_inode);
@@ -4143,7 +4220,7 @@ int btrfs_reloc_clone_csums(struct inode *inode, u64 file_pos, u64 len)
btrfs_add_ordered_sum(inode, ordered, sums);
}
btrfs_put_ordered_extent(ordered);
- return 0;
+ return ret;
}
void btrfs_reloc_cow_block(struct btrfs_trans_handle *trans,
diff --git a/fs/btrfs/root-tree.c b/fs/btrfs/root-tree.c
index 2d958be761c..6a1086e83ff 100644
--- a/fs/btrfs/root-tree.c
+++ b/fs/btrfs/root-tree.c
@@ -181,7 +181,6 @@ int btrfs_insert_root(struct btrfs_trans_handle *trans, struct btrfs_root
int btrfs_find_dead_roots(struct btrfs_root *root, u64 objectid)
{
struct btrfs_root *dead_root;
- struct btrfs_item *item;
struct btrfs_root_item *ri;
struct btrfs_key key;
struct btrfs_key found_key;
@@ -214,7 +213,6 @@ again:
nritems = btrfs_header_nritems(leaf);
slot = path->slots[0];
}
- item = btrfs_item_nr(leaf, slot);
btrfs_item_key_to_cpu(leaf, &key, slot);
if (btrfs_key_type(&key) != BTRFS_ROOT_ITEM_KEY)
goto next;
diff --git a/fs/btrfs/super.c b/fs/btrfs/super.c
index ebe46c62874..8299a25ffc8 100644
--- a/fs/btrfs/super.c
+++ b/fs/btrfs/super.c
@@ -61,6 +61,8 @@ static void btrfs_put_super(struct super_block *sb)
ret = close_ctree(root);
sb->s_fs_info = NULL;
+
+ (void)ret; /* FIXME: need to fix VFS to return error? */
}
enum {
@@ -68,7 +70,8 @@ enum {
Opt_nodatacow, Opt_max_inline, Opt_alloc_start, Opt_nobarrier, Opt_ssd,
Opt_nossd, Opt_ssd_spread, Opt_thread_pool, Opt_noacl, Opt_compress,
Opt_compress_force, Opt_notreelog, Opt_ratio, Opt_flushoncommit,
- Opt_discard, Opt_err,
+ Opt_discard, Opt_space_cache, Opt_clear_cache, Opt_err,
+ Opt_user_subvol_rm_allowed,
};
static match_table_t tokens = {
@@ -92,6 +95,9 @@ static match_table_t tokens = {
{Opt_flushoncommit, "flushoncommit"},
{Opt_ratio, "metadata_ratio=%d"},
{Opt_discard, "discard"},
+ {Opt_space_cache, "space_cache"},
+ {Opt_clear_cache, "clear_cache"},
+ {Opt_user_subvol_rm_allowed, "user_subvol_rm_allowed"},
{Opt_err, NULL},
};
@@ -235,6 +241,16 @@ int btrfs_parse_options(struct btrfs_root *root, char *options)
case Opt_discard:
btrfs_set_opt(info->mount_opt, DISCARD);
break;
+ case Opt_space_cache:
+ printk(KERN_INFO "btrfs: enabling disk space caching\n");
+ btrfs_set_opt(info->mount_opt, SPACE_CACHE);
+ case Opt_clear_cache:
+ printk(KERN_INFO "btrfs: force clearing of disk cache\n");
+ btrfs_set_opt(info->mount_opt, CLEAR_CACHE);
+ break;
+ case Opt_user_subvol_rm_allowed:
+ btrfs_set_opt(info->mount_opt, USER_SUBVOL_RM_ALLOWED);
+ break;
case Opt_err:
printk(KERN_INFO "btrfs: unrecognized mount option "
"'%s'\n", p);
@@ -380,7 +396,7 @@ static struct dentry *get_default_root(struct super_block *sb,
find_root:
new_root = btrfs_read_fs_root_no_name(root->fs_info, &location);
if (IS_ERR(new_root))
- return ERR_PTR(PTR_ERR(new_root));
+ return ERR_CAST(new_root);
if (btrfs_root_refs(&new_root->root_item) == 0)
return ERR_PTR(-ENOENT);
@@ -436,7 +452,6 @@ static int btrfs_fill_super(struct super_block *sb,
{
struct inode *inode;
struct dentry *root_dentry;
- struct btrfs_super_block *disk_super;
struct btrfs_root *tree_root;
struct btrfs_key key;
int err;
@@ -458,7 +473,6 @@ static int btrfs_fill_super(struct super_block *sb,
return PTR_ERR(tree_root);
}
sb->s_fs_info = tree_root;
- disk_super = &tree_root->fs_info->super_copy;
key.objectid = BTRFS_FIRST_FREE_OBJECTID;
key.type = BTRFS_INODE_ITEM_KEY;
@@ -571,7 +585,6 @@ static struct dentry *btrfs_mount(struct file_system_type *fs_type, int flags,
char *subvol_name = NULL;
u64 subvol_objectid = 0;
int error = 0;
- int found = 0;
if (!(flags & MS_RDONLY))
mode |= FMODE_WRITE;
@@ -607,7 +620,6 @@ static struct dentry *btrfs_mount(struct file_system_type *fs_type, int flags,
goto error_close_devices;
}
- found = 1;
btrfs_close_devices(fs_devices);
} else {
char b[BDEVNAME_SIZE];
@@ -629,7 +641,7 @@ static struct dentry *btrfs_mount(struct file_system_type *fs_type, int flags,
if (IS_ERR(root)) {
error = PTR_ERR(root);
deactivate_locked_super(s);
- goto error;
+ goto error_free_subvol_name;
}
/* if they gave us a subvolume name bind mount into that */
if (strcmp(subvol_name, ".")) {
@@ -643,14 +655,14 @@ static struct dentry *btrfs_mount(struct file_system_type *fs_type, int flags,
deactivate_locked_super(s);
error = PTR_ERR(new_root);
dput(root);
- goto error_close_devices;
+ goto error_free_subvol_name;
}
if (!new_root->d_inode) {
dput(root);
dput(new_root);
deactivate_locked_super(s);
error = -ENXIO;
- goto error_close_devices;
+ goto error_free_subvol_name;
}
dput(root);
root = new_root;
@@ -665,7 +677,6 @@ error_close_devices:
btrfs_close_devices(fs_devices);
error_free_subvol_name:
kfree(subvol_name);
-error:
return ERR_PTR(error);
}
@@ -713,18 +724,25 @@ static int btrfs_statfs(struct dentry *dentry, struct kstatfs *buf)
struct list_head *head = &root->fs_info->space_info;
struct btrfs_space_info *found;
u64 total_used = 0;
+ u64 total_used_data = 0;
int bits = dentry->d_sb->s_blocksize_bits;
__be32 *fsid = (__be32 *)root->fs_info->fsid;
rcu_read_lock();
- list_for_each_entry_rcu(found, head, list)
+ list_for_each_entry_rcu(found, head, list) {
+ if (found->flags & (BTRFS_BLOCK_GROUP_METADATA |
+ BTRFS_BLOCK_GROUP_SYSTEM))
+ total_used_data += found->disk_total;
+ else
+ total_used_data += found->disk_used;
total_used += found->disk_used;
+ }
rcu_read_unlock();
buf->f_namelen = BTRFS_NAME_LEN;
buf->f_blocks = btrfs_super_total_bytes(disk_super) >> bits;
buf->f_bfree = buf->f_blocks - (total_used >> bits);
- buf->f_bavail = buf->f_bfree;
+ buf->f_bavail = buf->f_blocks - (total_used_data >> bits);
buf->f_bsize = dentry->d_sb->s_blocksize;
buf->f_type = BTRFS_SUPER_MAGIC;
diff --git a/fs/btrfs/transaction.c b/fs/btrfs/transaction.c
index 66e4c66cc63..1fffbc017bd 100644
--- a/fs/btrfs/transaction.c
+++ b/fs/btrfs/transaction.c
@@ -163,6 +163,7 @@ enum btrfs_trans_type {
TRANS_START,
TRANS_JOIN,
TRANS_USERSPACE,
+ TRANS_JOIN_NOLOCK,
};
static int may_wait_transaction(struct btrfs_root *root, int type)
@@ -179,14 +180,14 @@ static struct btrfs_trans_handle *start_transaction(struct btrfs_root *root,
{
struct btrfs_trans_handle *h;
struct btrfs_transaction *cur_trans;
- int retries = 0;
int ret;
again:
h = kmem_cache_alloc(btrfs_trans_handle_cachep, GFP_NOFS);
if (!h)
return ERR_PTR(-ENOMEM);
- mutex_lock(&root->fs_info->trans_mutex);
+ if (type != TRANS_JOIN_NOLOCK)
+ mutex_lock(&root->fs_info->trans_mutex);
if (may_wait_transaction(root, type))
wait_current_trans(root);
@@ -195,7 +196,8 @@ again:
cur_trans = root->fs_info->running_transaction;
cur_trans->use_count++;
- mutex_unlock(&root->fs_info->trans_mutex);
+ if (type != TRANS_JOIN_NOLOCK)
+ mutex_unlock(&root->fs_info->trans_mutex);
h->transid = cur_trans->transid;
h->transaction = cur_trans;
@@ -212,8 +214,7 @@ again:
}
if (num_items > 0) {
- ret = btrfs_trans_reserve_metadata(h, root, num_items,
- &retries);
+ ret = btrfs_trans_reserve_metadata(h, root, num_items);
if (ret == -EAGAIN) {
btrfs_commit_transaction(h, root);
goto again;
@@ -224,9 +225,11 @@ again:
}
}
- mutex_lock(&root->fs_info->trans_mutex);
+ if (type != TRANS_JOIN_NOLOCK)
+ mutex_lock(&root->fs_info->trans_mutex);
record_root_in_trans(h, root);
- mutex_unlock(&root->fs_info->trans_mutex);
+ if (type != TRANS_JOIN_NOLOCK)
+ mutex_unlock(&root->fs_info->trans_mutex);
if (!current->journal_info && type != TRANS_USERSPACE)
current->journal_info = h;
@@ -244,6 +247,12 @@ struct btrfs_trans_handle *btrfs_join_transaction(struct btrfs_root *root,
return start_transaction(root, 0, TRANS_JOIN);
}
+struct btrfs_trans_handle *btrfs_join_transaction_nolock(struct btrfs_root *root,
+ int num_blocks)
+{
+ return start_transaction(root, 0, TRANS_JOIN_NOLOCK);
+}
+
struct btrfs_trans_handle *btrfs_start_ioctl_transaction(struct btrfs_root *r,
int num_blocks)
{
@@ -270,6 +279,58 @@ static noinline int wait_for_commit(struct btrfs_root *root,
return 0;
}
+int btrfs_wait_for_commit(struct btrfs_root *root, u64 transid)
+{
+ struct btrfs_transaction *cur_trans = NULL, *t;
+ int ret;
+
+ mutex_lock(&root->fs_info->trans_mutex);
+
+ ret = 0;
+ if (transid) {
+ if (transid <= root->fs_info->last_trans_committed)
+ goto out_unlock;
+
+ /* find specified transaction */
+ list_for_each_entry(t, &root->fs_info->trans_list, list) {
+ if (t->transid == transid) {
+ cur_trans = t;
+ break;
+ }
+ if (t->transid > transid)
+ break;
+ }
+ ret = -EINVAL;
+ if (!cur_trans)
+ goto out_unlock; /* bad transid */
+ } else {
+ /* find newest transaction that is committing | committed */
+ list_for_each_entry_reverse(t, &root->fs_info->trans_list,
+ list) {
+ if (t->in_commit) {
+ if (t->commit_done)
+ goto out_unlock;
+ cur_trans = t;
+ break;
+ }
+ }
+ if (!cur_trans)
+ goto out_unlock; /* nothing committing|committed */
+ }
+
+ cur_trans->use_count++;
+ mutex_unlock(&root->fs_info->trans_mutex);
+
+ wait_for_commit(root, cur_trans);
+
+ mutex_lock(&root->fs_info->trans_mutex);
+ put_transaction(cur_trans);
+ ret = 0;
+out_unlock:
+ mutex_unlock(&root->fs_info->trans_mutex);
+ return ret;
+}
+
#if 0
/*
* rate limit against the drop_snapshot code. This helps to slow down new
@@ -348,7 +409,7 @@ int btrfs_should_end_transaction(struct btrfs_trans_handle *trans,
}
static int __btrfs_end_transaction(struct btrfs_trans_handle *trans,
- struct btrfs_root *root, int throttle)
+ struct btrfs_root *root, int throttle, int lock)
{
struct btrfs_transaction *cur_trans = trans->transaction;
struct btrfs_fs_info *info = root->fs_info;
@@ -376,26 +437,29 @@ static int __btrfs_end_transaction(struct btrfs_trans_handle *trans,
btrfs_trans_release_metadata(trans, root);
- if (!root->fs_info->open_ioctl_trans &&
+ if (lock && !root->fs_info->open_ioctl_trans &&
should_end_transaction(trans, root))
trans->transaction->blocked = 1;
- if (cur_trans->blocked && !cur_trans->in_commit) {
+ if (lock && cur_trans->blocked && !cur_trans->in_commit) {
if (throttle)
return btrfs_commit_transaction(trans, root);
else
wake_up_process(info->transaction_kthread);
}
- mutex_lock(&info->trans_mutex);
+ if (lock)
+ mutex_lock(&info->trans_mutex);
WARN_ON(cur_trans != info->running_transaction);
WARN_ON(cur_trans->num_writers < 1);
cur_trans->num_writers--;
+ smp_mb();
if (waitqueue_active(&cur_trans->writer_wait))
wake_up(&cur_trans->writer_wait);
put_transaction(cur_trans);
- mutex_unlock(&info->trans_mutex);
+ if (lock)
+ mutex_unlock(&info->trans_mutex);
if (current->journal_info == trans)
current->journal_info = NULL;
@@ -411,13 +475,19 @@ static int __btrfs_end_transaction(struct btrfs_trans_handle *trans,
int btrfs_end_transaction(struct btrfs_trans_handle *trans,
struct btrfs_root *root)
{
- return __btrfs_end_transaction(trans, root, 0);
+ return __btrfs_end_transaction(trans, root, 0, 1);
}
int btrfs_end_transaction_throttle(struct btrfs_trans_handle *trans,
struct btrfs_root *root)
{
- return __btrfs_end_transaction(trans, root, 1);
+ return __btrfs_end_transaction(trans, root, 1, 1);
+}
+
+int btrfs_end_transaction_nolock(struct btrfs_trans_handle *trans,
+ struct btrfs_root *root)
+{
+ return __btrfs_end_transaction(trans, root, 0, 0);
}
/*
@@ -836,7 +906,6 @@ static noinline int create_pending_snapshot(struct btrfs_trans_handle *trans,
struct extent_buffer *tmp;
struct extent_buffer *old;
int ret;
- int retries = 0;
u64 to_reserve = 0;
u64 index = 0;
u64 objectid;
@@ -858,7 +927,7 @@ static noinline int create_pending_snapshot(struct btrfs_trans_handle *trans,
if (to_reserve > 0) {
ret = btrfs_block_rsv_add(trans, root, &pending->block_rsv,
- to_reserve, &retries);
+ to_reserve);
if (ret) {
pending->error = ret;
goto fail;
@@ -966,6 +1035,8 @@ static void update_super_roots(struct btrfs_root *root)
super->root = root_item->bytenr;
super->generation = root_item->generation;
super->root_level = root_item->level;
+ if (super->cache_generation != 0 || btrfs_test_opt(root, SPACE_CACHE))
+ super->cache_generation = root_item->generation;
}
int btrfs_transaction_in_commit(struct btrfs_fs_info *info)
@@ -988,11 +1059,127 @@ int btrfs_transaction_blocked(struct btrfs_fs_info *info)
return ret;
}
+/*
+ * wait for the current transaction commit to start and block subsequent
+ * transaction joins
+ */
+static void wait_current_trans_commit_start(struct btrfs_root *root,
+ struct btrfs_transaction *trans)
+{
+ DEFINE_WAIT(wait);
+
+ if (trans->in_commit)
+ return;
+
+ while (1) {
+ prepare_to_wait(&root->fs_info->transaction_blocked_wait, &wait,
+ TASK_UNINTERRUPTIBLE);
+ if (trans->in_commit) {
+ finish_wait(&root->fs_info->transaction_blocked_wait,
+ &wait);
+ break;
+ }
+ mutex_unlock(&root->fs_info->trans_mutex);
+ schedule();
+ mutex_lock(&root->fs_info->trans_mutex);
+ finish_wait(&root->fs_info->transaction_blocked_wait, &wait);
+ }
+}
+
+/*
+ * wait for the current transaction to start and then become unblocked.
+ * caller holds ref.
+ */
+static void wait_current_trans_commit_start_and_unblock(struct btrfs_root *root,
+ struct btrfs_transaction *trans)
+{
+ DEFINE_WAIT(wait);
+
+ if (trans->commit_done || (trans->in_commit && !trans->blocked))
+ return;
+
+ while (1) {
+ prepare_to_wait(&root->fs_info->transaction_wait, &wait,
+ TASK_UNINTERRUPTIBLE);
+ if (trans->commit_done ||
+ (trans->in_commit && !trans->blocked)) {
+ finish_wait(&root->fs_info->transaction_wait,
+ &wait);
+ break;
+ }
+ mutex_unlock(&root->fs_info->trans_mutex);
+ schedule();
+ mutex_lock(&root->fs_info->trans_mutex);
+ finish_wait(&root->fs_info->transaction_wait,
+ &wait);
+ }
+}
+
+/*
+ * commit transactions asynchronously. once btrfs_commit_transaction_async
+ * returns, any subsequent transaction will not be allowed to join.
+ */
+struct btrfs_async_commit {
+ struct btrfs_trans_handle *newtrans;
+ struct btrfs_root *root;
+ struct delayed_work work;
+};
+
+static void do_async_commit(struct work_struct *work)
+{
+ struct btrfs_async_commit *ac =
+ container_of(work, struct btrfs_async_commit, work.work);
+
+ btrfs_commit_transaction(ac->newtrans, ac->root);
+ kfree(ac);
+}
+
+int btrfs_commit_transaction_async(struct btrfs_trans_handle *trans,
+ struct btrfs_root *root,
+ int wait_for_unblock)
+{
+ struct btrfs_async_commit *ac;
+ struct btrfs_transaction *cur_trans;
+
+ ac = kmalloc(sizeof(*ac), GFP_NOFS);
+ BUG_ON(!ac);
+
+ INIT_DELAYED_WORK(&ac->work, do_async_commit);
+ ac->root = root;
+ ac->newtrans = btrfs_join_transaction(root, 0);
+
+ /* take transaction reference */
+ mutex_lock(&root->fs_info->trans_mutex);
+ cur_trans = trans->transaction;
+ cur_trans->use_count++;
+ mutex_unlock(&root->fs_info->trans_mutex);
+
+ btrfs_end_transaction(trans, root);
+ schedule_delayed_work(&ac->work, 0);
+
+ /* wait for transaction to start and unblock */
+ mutex_lock(&root->fs_info->trans_mutex);
+ if (wait_for_unblock)
+ wait_current_trans_commit_start_and_unblock(root, cur_trans);
+ else
+ wait_current_trans_commit_start(root, cur_trans);
+ put_transaction(cur_trans);
+ mutex_unlock(&root->fs_info->trans_mutex);
+
+ return 0;
+}
+
+/*
+ * btrfs_transaction state sequence:
+ * in_commit = 0, blocked = 0 (initial)
+ * in_commit = 1, blocked = 1
+ * blocked = 0
+ * commit_done = 1
+ */
int btrfs_commit_transaction(struct btrfs_trans_handle *trans,
struct btrfs_root *root)
{
unsigned long joined = 0;
- unsigned long timeout = 1;
struct btrfs_transaction *cur_trans;
struct btrfs_transaction *prev_trans = NULL;
DEFINE_WAIT(wait);
@@ -1039,6 +1226,8 @@ int btrfs_commit_transaction(struct btrfs_trans_handle *trans,
trans->transaction->in_commit = 1;
trans->transaction->blocked = 1;
+ wake_up(&root->fs_info->transaction_blocked_wait);
+
if (cur_trans->list.prev != &root->fs_info->trans_list) {
prev_trans = list_entry(cur_trans->list.prev,
struct btrfs_transaction, list);
@@ -1063,11 +1252,6 @@ int btrfs_commit_transaction(struct btrfs_trans_handle *trans,
snap_pending = 1;
WARN_ON(cur_trans != trans->transaction);
- if (cur_trans->num_writers > 1)
- timeout = MAX_SCHEDULE_TIMEOUT;
- else if (should_grow)
- timeout = 1;
-
mutex_unlock(&root->fs_info->trans_mutex);
if (flush_on_commit || snap_pending) {
@@ -1089,8 +1273,10 @@ int btrfs_commit_transaction(struct btrfs_trans_handle *trans,
TASK_UNINTERRUPTIBLE);
smp_mb();
- if (cur_trans->num_writers > 1 || should_grow)
- schedule_timeout(timeout);
+ if (cur_trans->num_writers > 1)
+ schedule_timeout(MAX_SCHEDULE_TIMEOUT);
+ else if (should_grow)
+ schedule_timeout(1);
mutex_lock(&root->fs_info->trans_mutex);
finish_wait(&cur_trans->writer_wait, &wait);
diff --git a/fs/btrfs/transaction.h b/fs/btrfs/transaction.h
index e104986d0bf..f104b57ad4e 100644
--- a/fs/btrfs/transaction.h
+++ b/fs/btrfs/transaction.h
@@ -87,12 +87,17 @@ static inline void btrfs_set_inode_last_trans(struct btrfs_trans_handle *trans,
int btrfs_end_transaction(struct btrfs_trans_handle *trans,
struct btrfs_root *root);
+int btrfs_end_transaction_nolock(struct btrfs_trans_handle *trans,
+ struct btrfs_root *root);
struct btrfs_trans_handle *btrfs_start_transaction(struct btrfs_root *root,
int num_items);
struct btrfs_trans_handle *btrfs_join_transaction(struct btrfs_root *root,
int num_blocks);
+struct btrfs_trans_handle *btrfs_join_transaction_nolock(struct btrfs_root *root,
+ int num_blocks);
struct btrfs_trans_handle *btrfs_start_ioctl_transaction(struct btrfs_root *r,
int num_blocks);
+int btrfs_wait_for_commit(struct btrfs_root *root, u64 transid);
int btrfs_write_and_wait_transaction(struct btrfs_trans_handle *trans,
struct btrfs_root *root);
int btrfs_commit_tree_roots(struct btrfs_trans_handle *trans,
@@ -104,6 +109,9 @@ int btrfs_defrag_root(struct btrfs_root *root, int cacheonly);
int btrfs_clean_old_snapshots(struct btrfs_root *root);
int btrfs_commit_transaction(struct btrfs_trans_handle *trans,
struct btrfs_root *root);
+int btrfs_commit_transaction_async(struct btrfs_trans_handle *trans,
+ struct btrfs_root *root,
+ int wait_for_unblock);
int btrfs_end_transaction_throttle(struct btrfs_trans_handle *trans,
struct btrfs_root *root);
int btrfs_should_end_transaction(struct btrfs_trans_handle *trans,
diff --git a/fs/btrfs/tree-defrag.c b/fs/btrfs/tree-defrag.c
index f7ac8e013ed..992ab425599 100644
--- a/fs/btrfs/tree-defrag.c
+++ b/fs/btrfs/tree-defrag.c
@@ -36,7 +36,6 @@ int btrfs_defrag_leaves(struct btrfs_trans_handle *trans,
int ret = 0;
int wret;
int level;
- int orig_level;
int is_extent = 0;
int next_key_ret = 0;
u64 last_ret = 0;
@@ -64,7 +63,6 @@ int btrfs_defrag_leaves(struct btrfs_trans_handle *trans,
return -ENOMEM;
level = btrfs_header_level(root->node);
- orig_level = level;
if (level == 0)
goto out;
diff --git a/fs/btrfs/tree-log.c b/fs/btrfs/tree-log.c
index fb102a9aee9..a29f19384a2 100644
--- a/fs/btrfs/tree-log.c
+++ b/fs/btrfs/tree-log.c
@@ -786,7 +786,6 @@ static noinline int add_inode_ref(struct btrfs_trans_handle *trans,
{
struct inode *dir;
int ret;
- struct btrfs_key location;
struct btrfs_inode_ref *ref;
struct btrfs_dir_item *di;
struct inode *inode;
@@ -795,10 +794,6 @@ static noinline int add_inode_ref(struct btrfs_trans_handle *trans,
unsigned long ref_ptr;
unsigned long ref_end;
- location.objectid = key->objectid;
- location.type = BTRFS_INODE_ITEM_KEY;
- location.offset = 0;
-
/*
* it is possible that we didn't log all the parent directories
* for a given inode. If we don't find the dir, just don't
@@ -1583,7 +1578,6 @@ static int replay_one_buffer(struct btrfs_root *log, struct extent_buffer *eb,
struct btrfs_path *path;
struct btrfs_root *root = wc->replay_dest;
struct btrfs_key key;
- u32 item_size;
int level;
int i;
int ret;
@@ -1601,7 +1595,6 @@ static int replay_one_buffer(struct btrfs_root *log, struct extent_buffer *eb,
nritems = btrfs_header_nritems(eb);
for (i = 0; i < nritems; i++) {
btrfs_item_key_to_cpu(eb, &key, i);
- item_size = btrfs_item_size_nr(eb, i);
/* inode keys are done during the first stage */
if (key.type == BTRFS_INODE_ITEM_KEY &&
@@ -1668,7 +1661,6 @@ static noinline int walk_down_log_tree(struct btrfs_trans_handle *trans,
struct walk_control *wc)
{
u64 root_owner;
- u64 root_gen;
u64 bytenr;
u64 ptr_gen;
struct extent_buffer *next;
@@ -1698,7 +1690,6 @@ static noinline int walk_down_log_tree(struct btrfs_trans_handle *trans,
parent = path->nodes[*level];
root_owner = btrfs_header_owner(parent);
- root_gen = btrfs_header_generation(parent);
next = btrfs_find_create_tree_block(root, bytenr, blocksize);
@@ -1749,7 +1740,6 @@ static noinline int walk_up_log_tree(struct btrfs_trans_handle *trans,
struct walk_control *wc)
{
u64 root_owner;
- u64 root_gen;
int i;
int slot;
int ret;
@@ -1757,8 +1747,6 @@ static noinline int walk_up_log_tree(struct btrfs_trans_handle *trans,
for (i = *level; i < BTRFS_MAX_LEVEL - 1 && path->nodes[i]; i++) {
slot = path->slots[i];
if (slot + 1 < btrfs_header_nritems(path->nodes[i])) {
- struct extent_buffer *node;
- node = path->nodes[i];
path->slots[i]++;
*level = i;
WARN_ON(*level == 0);
@@ -1771,7 +1759,6 @@ static noinline int walk_up_log_tree(struct btrfs_trans_handle *trans,
parent = path->nodes[*level + 1];
root_owner = btrfs_header_owner(parent);
- root_gen = btrfs_header_generation(parent);
wc->process_func(root, path->nodes[*level], wc,
btrfs_header_generation(path->nodes[*level]));
if (wc->free) {
@@ -2273,7 +2260,7 @@ fail:
}
btrfs_end_log_trans(root);
- return 0;
+ return err;
}
/* see comments for btrfs_del_dir_entries_in_log */
@@ -2729,7 +2716,6 @@ static int btrfs_log_inode(struct btrfs_trans_handle *trans,
struct btrfs_key max_key;
struct btrfs_root *log = root->log_root;
struct extent_buffer *src = NULL;
- u32 size;
int err = 0;
int ret;
int nritems;
@@ -2793,7 +2779,6 @@ again:
break;
src = path->nodes[0];
- size = btrfs_item_size_nr(src, path->slots[0]);
if (ins_nr && ins_start_slot + ins_nr == path->slots[0]) {
ins_nr++;
goto next_slot;
diff --git a/fs/btrfs/volumes.c b/fs/btrfs/volumes.c
index e25e46a8b4e..cc04dc1445d 100644
--- a/fs/btrfs/volumes.c
+++ b/fs/btrfs/volumes.c
@@ -1898,7 +1898,6 @@ int btrfs_balance(struct btrfs_root *dev_root)
u64 size_to_free;
struct btrfs_path *path;
struct btrfs_key key;
- struct btrfs_chunk *chunk;
struct btrfs_root *chunk_root = dev_root->fs_info->chunk_root;
struct btrfs_trans_handle *trans;
struct btrfs_key found_key;
@@ -1962,9 +1961,6 @@ int btrfs_balance(struct btrfs_root *dev_root)
if (found_key.objectid != key.objectid)
break;
- chunk = btrfs_item_ptr(path->nodes[0],
- path->slots[0],
- struct btrfs_chunk);
/* chunk zero is special */
if (found_key.offset == 0)
break;
@@ -3031,8 +3027,7 @@ int btrfs_map_bio(struct btrfs_root *root, int rw, struct bio *bio,
}
bio->bi_sector = multi->stripes[dev_nr].physical >> 9;
dev = multi->stripes[dev_nr].dev;
- BUG_ON(rw == WRITE && !dev->writeable);
- if (dev && dev->bdev) {
+ if (dev && dev->bdev && (rw != WRITE || dev->writeable)) {
bio->bi_bdev = dev->bdev;
if (async_submit)
schedule_bio(root, dev, rw, bio);
diff --git a/fs/btrfs/xattr.c b/fs/btrfs/xattr.c
index 88ecbb21587..698fdd2c739 100644
--- a/fs/btrfs/xattr.c
+++ b/fs/btrfs/xattr.c
@@ -178,7 +178,6 @@ ssize_t btrfs_listxattr(struct dentry *dentry, char *buffer, size_t size)
struct inode *inode = dentry->d_inode;
struct btrfs_root *root = BTRFS_I(inode)->root;
struct btrfs_path *path;
- struct btrfs_item *item;
struct extent_buffer *leaf;
struct btrfs_dir_item *di;
int ret = 0, slot, advance;
@@ -234,7 +233,6 @@ ssize_t btrfs_listxattr(struct dentry *dentry, char *buffer, size_t size)
}
advance = 1;
- item = btrfs_item_nr(leaf, slot);
btrfs_item_key_to_cpu(leaf, &found_key, slot);
/* check to make sure this item is what we want */
diff --git a/fs/btrfs/zlib.c b/fs/btrfs/zlib.c
index 3e2b90eaa23..b9cd5445f71 100644
--- a/fs/btrfs/zlib.c
+++ b/fs/btrfs/zlib.c
@@ -199,8 +199,6 @@ int btrfs_zlib_compress_pages(struct address_space *mapping,
int nr_pages = 0;
struct page *in_page = NULL;
struct page *out_page = NULL;
- int out_written = 0;
- int in_read = 0;
unsigned long bytes_left;
*out_pages = 0;
@@ -233,9 +231,6 @@ int btrfs_zlib_compress_pages(struct address_space *mapping,
workspace->def_strm.avail_out = PAGE_CACHE_SIZE;
workspace->def_strm.avail_in = min(len, PAGE_CACHE_SIZE);
- out_written = 0;
- in_read = 0;
-
while (workspace->def_strm.total_in < len) {
ret = zlib_deflate(&workspace->def_strm, Z_SYNC_FLUSH);
if (ret != Z_OK) {
diff --git a/fs/compat.c b/fs/compat.c
index ff66c0d7583..c580c322fa6 100644
--- a/fs/compat.c
+++ b/fs/compat.c
@@ -49,6 +49,7 @@
#include <linux/eventpoll.h>
#include <linux/fs_struct.h>
#include <linux/slab.h>
+#include <linux/pagemap.h>
#include <asm/uaccess.h>
#include <asm/mmu_context.h>
diff --git a/fs/fs-writeback.c b/fs/fs-writeback.c
index aed881a76b2..3d06ccc953a 100644
--- a/fs/fs-writeback.c
+++ b/fs/fs-writeback.c
@@ -707,6 +707,17 @@ get_next_work_item(struct backing_dev_info *bdi)
return work;
}
+/*
+ * Add in the number of potentially dirty inodes, because each inode
+ * write can dirty pagecache in the underlying blockdev.
+ */
+static unsigned long get_nr_dirty_pages(void)
+{
+ return global_page_state(NR_FILE_DIRTY) +
+ global_page_state(NR_UNSTABLE_NFS) +
+ get_nr_dirty_inodes();
+}
+
static long wb_check_old_data_flush(struct bdi_writeback *wb)
{
unsigned long expired;
@@ -724,13 +735,7 @@ static long wb_check_old_data_flush(struct bdi_writeback *wb)
return 0;
wb->last_old_flush = jiffies;
- /*
- * Add in the number of potentially dirty inodes, because each inode
- * write can dirty pagecache in the underlying blockdev.
- */
- nr_pages = global_page_state(NR_FILE_DIRTY) +
- global_page_state(NR_UNSTABLE_NFS) +
- get_nr_dirty_inodes();
+ nr_pages = get_nr_dirty_pages();
if (nr_pages) {
struct wb_writeback_work work = {
@@ -1076,32 +1081,42 @@ static void wait_sb_inodes(struct super_block *sb)
}
/**
- * writeback_inodes_sb - writeback dirty inodes from given super_block
+ * writeback_inodes_sb_nr - writeback dirty inodes from given super_block
* @sb: the superblock
+ * @nr: the number of pages to write
*
* Start writeback on some inodes on this super_block. No guarantees are made
* on how many (if any) will be written, and this function does not wait
- * for IO completion of submitted IO. The number of pages submitted is
- * returned.
+ * for IO completion of submitted IO.
*/
-void writeback_inodes_sb(struct super_block *sb)
+void writeback_inodes_sb_nr(struct super_block *sb, unsigned long nr)
{
- unsigned long nr_dirty = global_page_state(NR_FILE_DIRTY);
- unsigned long nr_unstable = global_page_state(NR_UNSTABLE_NFS);
DECLARE_COMPLETION_ONSTACK(done);
struct wb_writeback_work work = {
.sb = sb,
.sync_mode = WB_SYNC_NONE,
.done = &done,
+ .nr_pages = nr,
};
WARN_ON(!rwsem_is_locked(&sb->s_umount));
-
- work.nr_pages = nr_dirty + nr_unstable + get_nr_dirty_inodes();
-
bdi_queue_work(sb->s_bdi, &work);
wait_for_completion(&done);
}
+EXPORT_SYMBOL(writeback_inodes_sb_nr);
+
+/**
+ * writeback_inodes_sb - writeback dirty inodes from given super_block
+ * @sb: the superblock
+ *
+ * Start writeback on some inodes on this super_block. No guarantees are made
+ * on how many (if any) will be written, and this function does not wait
+ * for IO completion of submitted IO.
+ */
+void writeback_inodes_sb(struct super_block *sb)
+{
+ return writeback_inodes_sb_nr(sb, get_nr_dirty_pages());
+}
EXPORT_SYMBOL(writeback_inodes_sb);
/**
@@ -1124,6 +1139,27 @@ int writeback_inodes_sb_if_idle(struct super_block *sb)
EXPORT_SYMBOL(writeback_inodes_sb_if_idle);
/**
+ * writeback_inodes_sb_if_idle - start writeback if none underway
+ * @sb: the superblock
+ * @nr: the number of pages to write
+ *
+ * Invoke writeback_inodes_sb if no writeback is currently underway.
+ * Returns 1 if writeback was started, 0 if not.
+ */
+int writeback_inodes_sb_nr_if_idle(struct super_block *sb,
+ unsigned long nr)
+{
+ if (!writeback_in_progress(sb->s_bdi)) {
+ down_read(&sb->s_umount);
+ writeback_inodes_sb_nr(sb, nr);
+ up_read(&sb->s_umount);
+ return 1;
+ } else
+ return 0;
+}
+EXPORT_SYMBOL(writeback_inodes_sb_nr_if_idle);
+
+/**
* sync_inodes_sb - sync sb inode pages
* @sb: the superblock
*
diff --git a/fs/jffs2/build.c b/fs/jffs2/build.c
index a906f538d11..85c6be2db02 100644
--- a/fs/jffs2/build.c
+++ b/fs/jffs2/build.c
@@ -23,7 +23,7 @@ static void jffs2_build_remove_unlinked_inode(struct jffs2_sb_info *,
static inline struct jffs2_inode_cache *
first_inode_chain(int *i, struct jffs2_sb_info *c)
{
- for (; *i < INOCACHE_HASHSIZE; (*i)++) {
+ for (; *i < c->inocache_hashsize; (*i)++) {
if (c->inocache_list[*i])
return c->inocache_list[*i];
}
diff --git a/fs/jffs2/compr.c b/fs/jffs2/compr.c
index 617a1e5694c..de4247021d2 100644
--- a/fs/jffs2/compr.c
+++ b/fs/jffs2/compr.c
@@ -103,7 +103,7 @@ uint16_t jffs2_compress(struct jffs2_sb_info *c, struct jffs2_inode_info *f,
spin_unlock(&jffs2_compressor_list_lock);
*datalen = orig_slen;
*cdatalen = orig_dlen;
- compr_ret = this->compress(data_in, output_buf, datalen, cdatalen, NULL);
+ compr_ret = this->compress(data_in, output_buf, datalen, cdatalen);
spin_lock(&jffs2_compressor_list_lock);
this->usecount--;
if (!compr_ret) {
@@ -152,7 +152,7 @@ uint16_t jffs2_compress(struct jffs2_sb_info *c, struct jffs2_inode_info *f,
spin_unlock(&jffs2_compressor_list_lock);
*datalen = orig_slen;
*cdatalen = orig_dlen;
- compr_ret = this->compress(data_in, this->compr_buf, datalen, cdatalen, NULL);
+ compr_ret = this->compress(data_in, this->compr_buf, datalen, cdatalen);
spin_lock(&jffs2_compressor_list_lock);
this->usecount--;
if (!compr_ret) {
@@ -220,7 +220,7 @@ int jffs2_decompress(struct jffs2_sb_info *c, struct jffs2_inode_info *f,
if (comprtype == this->compr) {
this->usecount++;
spin_unlock(&jffs2_compressor_list_lock);
- ret = this->decompress(cdata_in, data_out, cdatalen, datalen, NULL);
+ ret = this->decompress(cdata_in, data_out, cdatalen, datalen);
spin_lock(&jffs2_compressor_list_lock);
if (ret) {
printk(KERN_WARNING "Decompressor \"%s\" returned %d\n", this->name, ret);
diff --git a/fs/jffs2/compr.h b/fs/jffs2/compr.h
index e471a9106fd..13bb7597ab3 100644
--- a/fs/jffs2/compr.h
+++ b/fs/jffs2/compr.h
@@ -49,9 +49,9 @@ struct jffs2_compressor {
char *name;
char compr; /* JFFS2_COMPR_XXX */
int (*compress)(unsigned char *data_in, unsigned char *cpage_out,
- uint32_t *srclen, uint32_t *destlen, void *model);
+ uint32_t *srclen, uint32_t *destlen);
int (*decompress)(unsigned char *cdata_in, unsigned char *data_out,
- uint32_t cdatalen, uint32_t datalen, void *model);
+ uint32_t cdatalen, uint32_t datalen);
int usecount;
int disabled; /* if set the compressor won't compress */
unsigned char *compr_buf; /* used by size compr. mode */
diff --git a/fs/jffs2/compr_lzo.c b/fs/jffs2/compr_lzo.c
index ed25ae7c98e..af186ee674d 100644
--- a/fs/jffs2/compr_lzo.c
+++ b/fs/jffs2/compr_lzo.c
@@ -42,7 +42,7 @@ static int __init alloc_workspace(void)
}
static int jffs2_lzo_compress(unsigned char *data_in, unsigned char *cpage_out,
- uint32_t *sourcelen, uint32_t *dstlen, void *model)
+ uint32_t *sourcelen, uint32_t *dstlen)
{
size_t compress_size;
int ret;
@@ -67,7 +67,7 @@ static int jffs2_lzo_compress(unsigned char *data_in, unsigned char *cpage_out,
}
static int jffs2_lzo_decompress(unsigned char *data_in, unsigned char *cpage_out,
- uint32_t srclen, uint32_t destlen, void *model)
+ uint32_t srclen, uint32_t destlen)
{
size_t dl = destlen;
int ret;
diff --git a/fs/jffs2/compr_rtime.c b/fs/jffs2/compr_rtime.c
index 9696ad9ef5f..16a5047903a 100644
--- a/fs/jffs2/compr_rtime.c
+++ b/fs/jffs2/compr_rtime.c
@@ -31,8 +31,7 @@
/* _compress returns the compressed size, -1 if bigger */
static int jffs2_rtime_compress(unsigned char *data_in,
unsigned char *cpage_out,
- uint32_t *sourcelen, uint32_t *dstlen,
- void *model)
+ uint32_t *sourcelen, uint32_t *dstlen)
{
short positions[256];
int outpos = 0;
@@ -73,8 +72,7 @@ static int jffs2_rtime_compress(unsigned char *data_in,
static int jffs2_rtime_decompress(unsigned char *data_in,
unsigned char *cpage_out,
- uint32_t srclen, uint32_t destlen,
- void *model)
+ uint32_t srclen, uint32_t destlen)
{
short positions[256];
int outpos = 0;
diff --git a/fs/jffs2/compr_rubin.c b/fs/jffs2/compr_rubin.c
index a12b4f76337..9e7cec808c4 100644
--- a/fs/jffs2/compr_rubin.c
+++ b/fs/jffs2/compr_rubin.c
@@ -298,7 +298,7 @@ static int rubin_do_compress(int bit_divider, int *bits, unsigned char *data_in,
#if 0
/* _compress returns the compressed size, -1 if bigger */
int jffs2_rubinmips_compress(unsigned char *data_in, unsigned char *cpage_out,
- uint32_t *sourcelen, uint32_t *dstlen, void *model)
+ uint32_t *sourcelen, uint32_t *dstlen)
{
return rubin_do_compress(BIT_DIVIDER_MIPS, bits_mips, data_in,
cpage_out, sourcelen, dstlen);
@@ -306,8 +306,7 @@ int jffs2_rubinmips_compress(unsigned char *data_in, unsigned char *cpage_out,
#endif
static int jffs2_dynrubin_compress(unsigned char *data_in,
unsigned char *cpage_out,
- uint32_t *sourcelen, uint32_t *dstlen,
- void *model)
+ uint32_t *sourcelen, uint32_t *dstlen)
{
int bits[8];
unsigned char histo[256];
@@ -387,8 +386,7 @@ static void rubin_do_decompress(int bit_divider, int *bits,
static int jffs2_rubinmips_decompress(unsigned char *data_in,
unsigned char *cpage_out,
- uint32_t sourcelen, uint32_t dstlen,
- void *model)
+ uint32_t sourcelen, uint32_t dstlen)
{
rubin_do_decompress(BIT_DIVIDER_MIPS, bits_mips, data_in,
cpage_out, sourcelen, dstlen);
@@ -397,8 +395,7 @@ static int jffs2_rubinmips_decompress(unsigned char *data_in,
static int jffs2_dynrubin_decompress(unsigned char *data_in,
unsigned char *cpage_out,
- uint32_t sourcelen, uint32_t dstlen,
- void *model)
+ uint32_t sourcelen, uint32_t dstlen)
{
int bits[8];
int c;
diff --git a/fs/jffs2/compr_zlib.c b/fs/jffs2/compr_zlib.c
index 97fc45de6f8..fd05a0b9431 100644
--- a/fs/jffs2/compr_zlib.c
+++ b/fs/jffs2/compr_zlib.c
@@ -68,8 +68,7 @@ static void free_workspaces(void)
static int jffs2_zlib_compress(unsigned char *data_in,
unsigned char *cpage_out,
- uint32_t *sourcelen, uint32_t *dstlen,
- void *model)
+ uint32_t *sourcelen, uint32_t *dstlen)
{
int ret;
@@ -136,8 +135,7 @@ static int jffs2_zlib_compress(unsigned char *data_in,
static int jffs2_zlib_decompress(unsigned char *data_in,
unsigned char *cpage_out,
- uint32_t srclen, uint32_t destlen,
- void *model)
+ uint32_t srclen, uint32_t destlen)
{
int ret;
int wbits = MAX_WBITS;
diff --git a/fs/jffs2/dir.c b/fs/jffs2/dir.c
index 79121aa5858..92978658ed1 100644
--- a/fs/jffs2/dir.c
+++ b/fs/jffs2/dir.c
@@ -367,7 +367,7 @@ static int jffs2_symlink (struct inode *dir_i, struct dentry *dentry, const char
}
/* We use f->target field to store the target path. */
- f->target = kmalloc(targetlen + 1, GFP_KERNEL);
+ f->target = kmemdup(target, targetlen + 1, GFP_KERNEL);
if (!f->target) {
printk(KERN_WARNING "Can't allocate %d bytes of memory\n", targetlen + 1);
mutex_unlock(&f->sem);
@@ -376,7 +376,6 @@ static int jffs2_symlink (struct inode *dir_i, struct dentry *dentry, const char
goto fail;
}
- memcpy(f->target, target, targetlen + 1);
D1(printk(KERN_DEBUG "jffs2_symlink: symlink's target '%s' cached\n", (char *)f->target));
/* No data here. Only a metadata node, which will be
diff --git a/fs/jffs2/erase.c b/fs/jffs2/erase.c
index abac961f617..e513f1913c1 100644
--- a/fs/jffs2/erase.c
+++ b/fs/jffs2/erase.c
@@ -151,7 +151,7 @@ int jffs2_erase_pending_blocks(struct jffs2_sb_info *c, int count)
}
/* Be nice */
- yield();
+ cond_resched();
mutex_lock(&c->erase_free_sem);
spin_lock(&c->erase_completion_lock);
}
diff --git a/fs/jffs2/fs.c b/fs/jffs2/fs.c
index d9beb06e6fc..e896e67767e 100644
--- a/fs/jffs2/fs.c
+++ b/fs/jffs2/fs.c
@@ -474,6 +474,25 @@ struct inode *jffs2_new_inode (struct inode *dir_i, int mode, struct jffs2_raw_i
return inode;
}
+static int calculate_inocache_hashsize(uint32_t flash_size)
+{
+ /*
+ * Pick a inocache hash size based on the size of the medium.
+ * Count how many megabytes we're dealing with, apply a hashsize twice
+ * that size, but rounding down to the usual big powers of 2. And keep
+ * to sensible bounds.
+ */
+
+ int size_mb = flash_size / 1024 / 1024;
+ int hashsize = (size_mb * 2) & ~0x3f;
+
+ if (hashsize < INOCACHE_HASHSIZE_MIN)
+ return INOCACHE_HASHSIZE_MIN;
+ if (hashsize > INOCACHE_HASHSIZE_MAX)
+ return INOCACHE_HASHSIZE_MAX;
+
+ return hashsize;
+}
int jffs2_do_fill_super(struct super_block *sb, void *data, int silent)
{
@@ -520,7 +539,8 @@ int jffs2_do_fill_super(struct super_block *sb, void *data, int silent)
if (ret)
return ret;
- c->inocache_list = kcalloc(INOCACHE_HASHSIZE, sizeof(struct jffs2_inode_cache *), GFP_KERNEL);
+ c->inocache_hashsize = calculate_inocache_hashsize(c->flash_size);
+ c->inocache_list = kcalloc(c->inocache_hashsize, sizeof(struct jffs2_inode_cache *), GFP_KERNEL);
if (!c->inocache_list) {
ret = -ENOMEM;
goto out_wbuf;
diff --git a/fs/jffs2/gc.c b/fs/jffs2/gc.c
index 846a7945249..31dce611337 100644
--- a/fs/jffs2/gc.c
+++ b/fs/jffs2/gc.c
@@ -219,13 +219,14 @@ int jffs2_garbage_collect_pass(struct jffs2_sb_info *c)
if (!list_empty(&c->erase_complete_list) ||
!list_empty(&c->erase_pending_list)) {
spin_unlock(&c->erase_completion_lock);
+ mutex_unlock(&c->alloc_sem);
D1(printk(KERN_DEBUG "jffs2_garbage_collect_pass() erasing pending blocks\n"));
- if (jffs2_erase_pending_blocks(c, 1)) {
- mutex_unlock(&c->alloc_sem);
+ if (jffs2_erase_pending_blocks(c, 1))
return 0;
- }
+
D1(printk(KERN_DEBUG "No progress from erasing blocks; doing GC anyway\n"));
spin_lock(&c->erase_completion_lock);
+ mutex_lock(&c->alloc_sem);
}
/* First, work out which block we're garbage-collecting */
diff --git a/fs/jffs2/jffs2_fs_sb.h b/fs/jffs2/jffs2_fs_sb.h
index 6784bc89add..f864005de64 100644
--- a/fs/jffs2/jffs2_fs_sb.h
+++ b/fs/jffs2/jffs2_fs_sb.h
@@ -100,6 +100,7 @@ struct jffs2_sb_info {
wait_queue_head_t erase_wait; /* For waiting for erases to complete */
wait_queue_head_t inocache_wq;
+ int inocache_hashsize;
struct jffs2_inode_cache **inocache_list;
spinlock_t inocache_lock;
diff --git a/fs/jffs2/nodelist.c b/fs/jffs2/nodelist.c
index af02bd13846..5e03233c236 100644
--- a/fs/jffs2/nodelist.c
+++ b/fs/jffs2/nodelist.c
@@ -420,7 +420,7 @@ struct jffs2_inode_cache *jffs2_get_ino_cache(struct jffs2_sb_info *c, uint32_t
{
struct jffs2_inode_cache *ret;
- ret = c->inocache_list[ino % INOCACHE_HASHSIZE];
+ ret = c->inocache_list[ino % c->inocache_hashsize];
while (ret && ret->ino < ino) {
ret = ret->next;
}
@@ -441,7 +441,7 @@ void jffs2_add_ino_cache (struct jffs2_sb_info *c, struct jffs2_inode_cache *new
dbg_inocache("add %p (ino #%u)\n", new, new->ino);
- prev = &c->inocache_list[new->ino % INOCACHE_HASHSIZE];
+ prev = &c->inocache_list[new->ino % c->inocache_hashsize];
while ((*prev) && (*prev)->ino < new->ino) {
prev = &(*prev)->next;
@@ -462,7 +462,7 @@ void jffs2_del_ino_cache(struct jffs2_sb_info *c, struct jffs2_inode_cache *old)
dbg_inocache("del %p (ino #%u)\n", old, old->ino);
spin_lock(&c->inocache_lock);
- prev = &c->inocache_list[old->ino % INOCACHE_HASHSIZE];
+ prev = &c->inocache_list[old->ino % c->inocache_hashsize];
while ((*prev) && (*prev)->ino < old->ino) {
prev = &(*prev)->next;
@@ -487,7 +487,7 @@ void jffs2_free_ino_caches(struct jffs2_sb_info *c)
int i;
struct jffs2_inode_cache *this, *next;
- for (i=0; i<INOCACHE_HASHSIZE; i++) {
+ for (i=0; i < c->inocache_hashsize; i++) {
this = c->inocache_list[i];
while (this) {
next = this->next;
diff --git a/fs/jffs2/nodelist.h b/fs/jffs2/nodelist.h
index 523a9169105..5a53d9bdb2b 100644
--- a/fs/jffs2/nodelist.h
+++ b/fs/jffs2/nodelist.h
@@ -199,7 +199,8 @@ struct jffs2_inode_cache {
#define RAWNODE_CLASS_XATTR_DATUM 1
#define RAWNODE_CLASS_XATTR_REF 2
-#define INOCACHE_HASHSIZE 128
+#define INOCACHE_HASHSIZE_MIN 128
+#define INOCACHE_HASHSIZE_MAX 1024
#define write_ofs(c) ((c)->nextblock->offset + (c)->sector_size - (c)->nextblock->free_size)
diff --git a/fs/jffs2/scan.c b/fs/jffs2/scan.c
index 46f870d1cc3..b632dddcb48 100644
--- a/fs/jffs2/scan.c
+++ b/fs/jffs2/scan.c
@@ -20,7 +20,7 @@
#include "summary.h"
#include "debug.h"
-#define DEFAULT_EMPTY_SCAN_SIZE 1024
+#define DEFAULT_EMPTY_SCAN_SIZE 256
#define noisy_printk(noise, args...) do { \
if (*(noise)) { \
@@ -435,7 +435,7 @@ static int jffs2_scan_eraseblock (struct jffs2_sb_info *c, struct jffs2_eraseblo
unsigned char *buf, uint32_t buf_size, struct jffs2_summary *s) {
struct jffs2_unknown_node *node;
struct jffs2_unknown_node crcnode;
- uint32_t ofs, prevofs;
+ uint32_t ofs, prevofs, max_ofs;
uint32_t hdr_crc, buf_ofs, buf_len;
int err;
int noise = 0;
@@ -550,12 +550,12 @@ static int jffs2_scan_eraseblock (struct jffs2_sb_info *c, struct jffs2_eraseblo
/* We temporarily use 'ofs' as a pointer into the buffer/jeb */
ofs = 0;
-
- /* Scan only 4KiB of 0xFF before declaring it's empty */
- while(ofs < EMPTY_SCAN_SIZE(c->sector_size) && *(uint32_t *)(&buf[ofs]) == 0xFFFFFFFF)
+ max_ofs = EMPTY_SCAN_SIZE(c->sector_size);
+ /* Scan only EMPTY_SCAN_SIZE of 0xFF before declaring it's empty */
+ while(ofs < max_ofs && *(uint32_t *)(&buf[ofs]) == 0xFFFFFFFF)
ofs += 4;
- if (ofs == EMPTY_SCAN_SIZE(c->sector_size)) {
+ if (ofs == max_ofs) {
#ifdef CONFIG_JFFS2_FS_WRITEBUFFER
if (jffs2_cleanmarker_oob(c)) {
/* scan oob, take care of cleanmarker */
diff --git a/include/asm-generic/audit_change_attr.h b/include/asm-generic/audit_change_attr.h
index 50764550a60..bcbab3e4a3b 100644
--- a/include/asm-generic/audit_change_attr.h
+++ b/include/asm-generic/audit_change_attr.h
@@ -20,3 +20,7 @@ __NR_chown32,
__NR_fchown32,
__NR_lchown32,
#endif
+__NR_link,
+#ifdef __NR_linkat
+__NR_linkat,
+#endif
diff --git a/include/linux/audit.h b/include/linux/audit.h
index e24afabc548..8b5c0620abf 100644
--- a/include/linux/audit.h
+++ b/include/linux/audit.h
@@ -102,6 +102,7 @@
#define AUDIT_EOE 1320 /* End of multi-record event */
#define AUDIT_BPRM_FCAPS 1321 /* Information about fcaps increasing perms */
#define AUDIT_CAPSET 1322 /* Record showing argument to sys_capset */
+#define AUDIT_MMAP 1323 /* Record showing descriptor and flags in mmap */
#define AUDIT_AVC 1400 /* SE Linux avc denial or grant */
#define AUDIT_SELINUX_ERR 1401 /* Internal SE Linux Errors */
@@ -478,6 +479,7 @@ extern int __audit_log_bprm_fcaps(struct linux_binprm *bprm,
const struct cred *new,
const struct cred *old);
extern void __audit_log_capset(pid_t pid, const struct cred *new, const struct cred *old);
+extern void __audit_mmap_fd(int fd, int flags);
static inline void audit_ipc_obj(struct kern_ipc_perm *ipcp)
{
@@ -531,6 +533,12 @@ static inline void audit_log_capset(pid_t pid, const struct cred *new,
__audit_log_capset(pid, new, old);
}
+static inline void audit_mmap_fd(int fd, int flags)
+{
+ if (unlikely(!audit_dummy_context()))
+ __audit_mmap_fd(fd, flags);
+}
+
extern int audit_n_rules;
extern int audit_signals;
#else
@@ -564,6 +572,7 @@ extern int audit_signals;
#define audit_mq_getsetattr(d,s) ((void)0)
#define audit_log_bprm_fcaps(b, ncr, ocr) ({ 0; })
#define audit_log_capset(pid, ncr, ocr) ((void)0)
+#define audit_mmap_fd(fd, flags) ((void)0)
#define audit_ptrace(t) ((void)0)
#define audit_n_rules 0
#define audit_signals 0
diff --git a/include/linux/jump_label.h b/include/linux/jump_label.h
index b67cb180e6e..7880f18e4b8 100644
--- a/include/linux/jump_label.h
+++ b/include/linux/jump_label.h
@@ -1,7 +1,7 @@
#ifndef _LINUX_JUMP_LABEL_H
#define _LINUX_JUMP_LABEL_H
-#if defined(CC_HAVE_ASM_GOTO) && defined(CONFIG_HAVE_ARCH_JUMP_LABEL)
+#if defined(CC_HAVE_ASM_GOTO) && defined(CONFIG_JUMP_LABEL)
# include <asm/jump_label.h>
# define HAVE_JUMP_LABEL
#endif
@@ -18,6 +18,8 @@ struct module;
extern struct jump_entry __start___jump_table[];
extern struct jump_entry __stop___jump_table[];
+extern void jump_label_lock(void);
+extern void jump_label_unlock(void);
extern void arch_jump_label_transform(struct jump_entry *entry,
enum jump_label_type type);
extern void arch_jump_label_text_poke_early(jump_label_t addr);
@@ -59,6 +61,9 @@ static inline int jump_label_text_reserved(void *start, void *end)
return 0;
}
+static inline void jump_label_lock(void) {}
+static inline void jump_label_unlock(void) {}
+
#endif
#define COND_STMT(key, stmt) \
diff --git a/include/linux/mtd/bbm.h b/include/linux/mtd/bbm.h
index 7fa20beb2ab..57cc0e63714 100644
--- a/include/linux/mtd/bbm.h
+++ b/include/linux/mtd/bbm.h
@@ -84,7 +84,7 @@ struct nand_bbt_descr {
#define NAND_BBT_PERCHIP 0x00000080
/* bbt has a version counter at offset veroffs */
#define NAND_BBT_VERSION 0x00000100
-/* Create a bbt if none axists */
+/* Create a bbt if none exists */
#define NAND_BBT_CREATE 0x00000200
/* Search good / bad pattern through all pages of a block */
#define NAND_BBT_SCANALLPAGES 0x00000400
@@ -102,6 +102,8 @@ struct nand_bbt_descr {
#define NAND_BBT_SCANBYTE1AND6 0x00100000
/* The nand_bbt_descr was created dynamicaly and must be freed */
#define NAND_BBT_DYNAMICSTRUCT 0x00200000
+/* The bad block table does not OOB for marker */
+#define NAND_BBT_NO_OOB 0x00400000
/* The maximum number of blocks to scan for a bbt */
#define NAND_BBT_SCAN_MAXBLOCKS 4
diff --git a/include/linux/mtd/cfi.h b/include/linux/mtd/cfi.h
index d2118b0eac9..4dd0c2cd765 100644
--- a/include/linux/mtd/cfi.h
+++ b/include/linux/mtd/cfi.h
@@ -289,6 +289,7 @@ struct cfi_private {
must be of the same type. */
int mfr, id;
int numchips;
+ map_word sector_erase_cmd;
unsigned long chipshift; /* Because they're of the same type */
const char *im_name; /* inter_module name for cmdset_setup */
struct flchip chips[0]; /* per-chip data structure for each chip */
diff --git a/include/linux/mtd/fsmc.h b/include/linux/mtd/fsmc.h
new file mode 100644
index 00000000000..5d2556700ec
--- /dev/null
+++ b/include/linux/mtd/fsmc.h
@@ -0,0 +1,181 @@
+/*
+ * incude/mtd/fsmc.h
+ *
+ * ST Microelectronics
+ * Flexible Static Memory Controller (FSMC)
+ * platform data interface and header file
+ *
+ * Copyright © 2010 ST Microelectronics
+ * Vipin Kumar <vipin.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __MTD_FSMC_H
+#define __MTD_FSMC_H
+
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
+#include <linux/types.h>
+#include <linux/mtd/partitions.h>
+#include <asm/param.h>
+
+#define FSMC_NAND_BW8 1
+#define FSMC_NAND_BW16 2
+
+/*
+ * The placement of the Command Latch Enable (CLE) and
+ * Address Latch Enable (ALE) is twised around in the
+ * SPEAR310 implementation.
+ */
+#if defined(CONFIG_MACH_SPEAR310)
+#define PLAT_NAND_CLE (1 << 17)
+#define PLAT_NAND_ALE (1 << 16)
+#else
+#define PLAT_NAND_CLE (1 << 16)
+#define PLAT_NAND_ALE (1 << 17)
+#endif
+
+#define FSMC_MAX_NOR_BANKS 4
+#define FSMC_MAX_NAND_BANKS 4
+
+#define FSMC_FLASH_WIDTH8 1
+#define FSMC_FLASH_WIDTH16 2
+
+struct fsmc_nor_bank_regs {
+ uint32_t ctrl;
+ uint32_t ctrl_tim;
+};
+
+/* ctrl register definitions */
+#define BANK_ENABLE (1 << 0)
+#define MUXED (1 << 1)
+#define NOR_DEV (2 << 2)
+#define WIDTH_8 (0 << 4)
+#define WIDTH_16 (1 << 4)
+#define RSTPWRDWN (1 << 6)
+#define WPROT (1 << 7)
+#define WRT_ENABLE (1 << 12)
+#define WAIT_ENB (1 << 13)
+
+/* ctrl_tim register definitions */
+
+struct fsms_nand_bank_regs {
+ uint32_t pc;
+ uint32_t sts;
+ uint32_t comm;
+ uint32_t attrib;
+ uint32_t ioata;
+ uint32_t ecc1;
+ uint32_t ecc2;
+ uint32_t ecc3;
+};
+
+#define FSMC_NOR_REG_SIZE 0x40
+
+struct fsmc_regs {
+ struct fsmc_nor_bank_regs nor_bank_regs[FSMC_MAX_NOR_BANKS];
+ uint8_t reserved_1[0x40 - 0x20];
+ struct fsms_nand_bank_regs bank_regs[FSMC_MAX_NAND_BANKS];
+ uint8_t reserved_2[0xfe0 - 0xc0];
+ uint32_t peripid0; /* 0xfe0 */
+ uint32_t peripid1; /* 0xfe4 */
+ uint32_t peripid2; /* 0xfe8 */
+ uint32_t peripid3; /* 0xfec */
+ uint32_t pcellid0; /* 0xff0 */
+ uint32_t pcellid1; /* 0xff4 */
+ uint32_t pcellid2; /* 0xff8 */
+ uint32_t pcellid3; /* 0xffc */
+};
+
+#define FSMC_BUSY_WAIT_TIMEOUT (1 * HZ)
+
+/* pc register definitions */
+#define FSMC_RESET (1 << 0)
+#define FSMC_WAITON (1 << 1)
+#define FSMC_ENABLE (1 << 2)
+#define FSMC_DEVTYPE_NAND (1 << 3)
+#define FSMC_DEVWID_8 (0 << 4)
+#define FSMC_DEVWID_16 (1 << 4)
+#define FSMC_ECCEN (1 << 6)
+#define FSMC_ECCPLEN_512 (0 << 7)
+#define FSMC_ECCPLEN_256 (1 << 7)
+#define FSMC_TCLR_1 (1 << 9)
+#define FSMC_TAR_1 (1 << 13)
+
+/* sts register definitions */
+#define FSMC_CODE_RDY (1 << 15)
+
+/* comm register definitions */
+#define FSMC_TSET_0 (0 << 0)
+#define FSMC_TWAIT_6 (6 << 8)
+#define FSMC_THOLD_4 (4 << 16)
+#define FSMC_THIZ_1 (1 << 24)
+
+/* peripid2 register definitions */
+#define FSMC_REVISION_MSK (0xf)
+#define FSMC_REVISION_SHFT (0x4)
+
+#define FSMC_VER1 1
+#define FSMC_VER2 2
+#define FSMC_VER3 3
+#define FSMC_VER4 4
+#define FSMC_VER5 5
+#define FSMC_VER6 6
+#define FSMC_VER7 7
+#define FSMC_VER8 8
+
+static inline uint32_t get_fsmc_version(struct fsmc_regs *regs)
+{
+ return (readl(&regs->peripid2) >> FSMC_REVISION_SHFT) &
+ FSMC_REVISION_MSK;
+}
+
+/*
+ * There are 13 bytes of ecc for every 512 byte block in FSMC version 8
+ * and it has to be read consecutively and immediately after the 512
+ * byte data block for hardware to generate the error bit offsets
+ * Managing the ecc bytes in the following way is easier. This way is
+ * similar to oobfree structure maintained already in u-boot nand driver
+ */
+#define MAX_ECCPLACE_ENTRIES 32
+
+struct fsmc_nand_eccplace {
+ uint8_t offset;
+ uint8_t length;
+};
+
+struct fsmc_eccplace {
+ struct fsmc_nand_eccplace eccplace[MAX_ECCPLACE_ENTRIES];
+};
+
+/**
+ * fsmc_nand_platform_data - platform specific NAND controller config
+ * @partitions: partition table for the platform, use a default fallback
+ * if this is NULL
+ * @nr_partitions: the number of partitions in the previous entry
+ * @options: different options for the driver
+ * @width: bus width
+ * @bank: default bank
+ * @select_bank: callback to select a certain bank, this is
+ * platform-specific. If the controller only supports one bank
+ * this may be set to NULL
+ */
+struct fsmc_nand_platform_data {
+ struct mtd_partition *partitions;
+ unsigned int nr_partitions;
+ unsigned int options;
+ unsigned int width;
+ unsigned int bank;
+ void (*select_bank)(uint32_t bank, uint32_t busw);
+};
+
+extern int __init fsmc_nor_init(struct platform_device *pdev,
+ unsigned long base, uint32_t bank, uint32_t width);
+extern void __init fsmc_init_board_info(struct platform_device *pdev,
+ struct mtd_partition *partitions, unsigned int nr_partitions,
+ unsigned int width);
+
+#endif /* __MTD_FSMC_H */
diff --git a/include/linux/mtd/inftl.h b/include/linux/mtd/inftl.h
index 64ee53ce95a..02cd5f9b79b 100644
--- a/include/linux/mtd/inftl.h
+++ b/include/linux/mtd/inftl.h
@@ -37,14 +37,14 @@ struct INFTLrecord {
__u16 firstEUN;
__u16 lastEUN;
__u16 numfreeEUNs;
- __u16 LastFreeEUN; /* To speed up finding a free EUN */
+ __u16 LastFreeEUN; /* To speed up finding a free EUN */
int head,sect,cyl;
- __u16 *PUtable; /* Physical Unit Table */
- __u16 *VUtable; /* Virtual Unit Table */
- unsigned int nb_blocks; /* number of physical blocks */
- unsigned int nb_boot_blocks; /* number of blocks used by the bios */
- struct erase_info instr;
- struct nand_ecclayout oobinfo;
+ __u16 *PUtable; /* Physical Unit Table */
+ __u16 *VUtable; /* Virtual Unit Table */
+ unsigned int nb_blocks; /* number of physical blocks */
+ unsigned int nb_boot_blocks; /* number of blocks used by the bios */
+ struct erase_info instr;
+ struct nand_ecclayout oobinfo;
};
int INFTL_mount(struct INFTLrecord *s);
diff --git a/include/linux/mtd/mtd.h b/include/linux/mtd/mtd.h
index 8485e42a9b0..fe8d77ebec1 100644
--- a/include/linux/mtd/mtd.h
+++ b/include/linux/mtd/mtd.h
@@ -110,6 +110,21 @@ struct mtd_oob_ops {
uint8_t *oobbuf;
};
+#define MTD_MAX_OOBFREE_ENTRIES_LARGE 32
+#define MTD_MAX_ECCPOS_ENTRIES_LARGE 448
+/*
+ * Internal ECC layout control structure. For historical reasons, there is a
+ * similar, smaller struct nand_ecclayout_user (in mtd-abi.h) that is retained
+ * for export to user-space via the ECCGETLAYOUT ioctl.
+ * nand_ecclayout should be expandable in the future simply by the above macros.
+ */
+struct nand_ecclayout {
+ __u32 eccbytes;
+ __u32 eccpos[MTD_MAX_ECCPOS_ENTRIES_LARGE];
+ __u32 oobavail;
+ struct nand_oobfree oobfree[MTD_MAX_OOBFREE_ENTRIES_LARGE];
+};
+
struct mtd_info {
u_char type;
uint32_t flags;
diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h
index 102e12c58cb..63e17d01fde 100644
--- a/include/linux/mtd/nand.h
+++ b/include/linux/mtd/nand.h
@@ -27,15 +27,17 @@
struct mtd_info;
struct nand_flash_dev;
/* Scan and identify a NAND device */
-extern int nand_scan (struct mtd_info *mtd, int max_chips);
-/* Separate phases of nand_scan(), allowing board driver to intervene
- * and override command or ECC setup according to flash type */
+extern int nand_scan(struct mtd_info *mtd, int max_chips);
+/*
+ * Separate phases of nand_scan(), allowing board driver to intervene
+ * and override command or ECC setup according to flash type.
+ */
extern int nand_scan_ident(struct mtd_info *mtd, int max_chips,
struct nand_flash_dev *table);
extern int nand_scan_tail(struct mtd_info *mtd);
/* Free resources held by the NAND device */
-extern void nand_release (struct mtd_info *mtd);
+extern void nand_release(struct mtd_info *mtd);
/* Internal helper for board drivers which need to override command function */
extern void nand_wait_ready(struct mtd_info *mtd);
@@ -49,12 +51,13 @@ extern int nand_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len);
/* The maximum number of NAND chips in an array */
#define NAND_MAX_CHIPS 8
-/* This constant declares the max. oobsize / page, which
+/*
+ * This constant declares the max. oobsize / page, which
* is supported now. If you add a chip with bigger oobsize/page
* adjust this accordingly.
*/
-#define NAND_MAX_OOBSIZE 256
-#define NAND_MAX_PAGESIZE 4096
+#define NAND_MAX_OOBSIZE 576
+#define NAND_MAX_PAGESIZE 8192
/*
* Constants for hardware specific CLE/ALE/NCE function
@@ -88,6 +91,7 @@ extern int nand_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len);
#define NAND_CMD_RNDIN 0x85
#define NAND_CMD_READID 0x90
#define NAND_CMD_ERASE2 0xd0
+#define NAND_CMD_PARAM 0xec
#define NAND_CMD_RESET 0xff
#define NAND_CMD_LOCK 0x2a
@@ -152,9 +156,10 @@ typedef enum {
#define NAND_GET_DEVICE 0x80
-/* Option constants for bizarre disfunctionality and real
-* features
-*/
+/*
+ * Option constants for bizarre disfunctionality and real
+ * features.
+ */
/* Chip can not auto increment pages */
#define NAND_NO_AUTOINCR 0x00000001
/* Buswitdh is 16 bit */
@@ -165,19 +170,27 @@ typedef enum {
#define NAND_CACHEPRG 0x00000008
/* Chip has copy back function */
#define NAND_COPYBACK 0x00000010
-/* AND Chip which has 4 banks and a confusing page / block
- * assignment. See Renesas datasheet for further information */
+/*
+ * AND Chip which has 4 banks and a confusing page / block
+ * assignment. See Renesas datasheet for further information.
+ */
#define NAND_IS_AND 0x00000020
-/* Chip has a array of 4 pages which can be read without
- * additional ready /busy waits */
+/*
+ * Chip has a array of 4 pages which can be read without
+ * additional ready /busy waits.
+ */
#define NAND_4PAGE_ARRAY 0x00000040
-/* Chip requires that BBT is periodically rewritten to prevent
+/*
+ * Chip requires that BBT is periodically rewritten to prevent
* bits from adjacent blocks from 'leaking' in altering data.
- * This happens with the Renesas AG-AND chips, possibly others. */
+ * This happens with the Renesas AG-AND chips, possibly others.
+ */
#define BBT_AUTO_REFRESH 0x00000080
-/* Chip does not require ready check on read. True
+/*
+ * Chip does not require ready check on read. True
* for all large page devices, as they do not support
- * autoincrement.*/
+ * autoincrement.
+ */
#define NAND_NO_READRDY 0x00000100
/* Chip does not allow subpage writes */
#define NAND_NO_SUBPAGE_WRITE 0x00000200
@@ -205,16 +218,27 @@ typedef enum {
#define NAND_CHIPOPTIONS_MSK (0x0000ffff & ~NAND_NO_AUTOINCR)
/* Non chip related options */
-/* Use a flash based bad block table. This option is passed to the
- * default bad block table function. */
+/*
+ * Use a flash based bad block table. OOB identifier is saved in OOB area.
+ * This option is passed to the default bad block table function.
+ */
#define NAND_USE_FLASH_BBT 0x00010000
/* This option skips the bbt scan during initialization. */
#define NAND_SKIP_BBTSCAN 0x00020000
-/* This option is defined if the board driver allocates its own buffers
- (e.g. because it needs them DMA-coherent */
+/*
+ * This option is defined if the board driver allocates its own buffers
+ * (e.g. because it needs them DMA-coherent).
+ */
#define NAND_OWN_BUFFERS 0x00040000
/* Chip may not exist, so silence any errors in scan */
#define NAND_SCAN_SILENT_NODEV 0x00080000
+/*
+ * If passed additionally to NAND_USE_FLASH_BBT then BBT code will not touch
+ * the OOB area.
+ */
+#define NAND_USE_FLASH_BBT_NO_OOB 0x00100000
+/* Create an empty BBT with no vendor information if the BBT is available */
+#define NAND_CREATE_EMPTY_BBT 0x00200000
/* Options set by nand scan */
/* Nand scan has allocated controller struct */
@@ -227,15 +251,80 @@ typedef enum {
/* Keep gcc happy */
struct nand_chip;
+struct nand_onfi_params {
+ /* rev info and features block */
+ /* 'O' 'N' 'F' 'I' */
+ u8 sig[4];
+ __le16 revision;
+ __le16 features;
+ __le16 opt_cmd;
+ u8 reserved[22];
+
+ /* manufacturer information block */
+ char manufacturer[12];
+ char model[20];
+ u8 jedec_id;
+ __le16 date_code;
+ u8 reserved2[13];
+
+ /* memory organization block */
+ __le32 byte_per_page;
+ __le16 spare_bytes_per_page;
+ __le32 data_bytes_per_ppage;
+ __le16 spare_bytes_per_ppage;
+ __le32 pages_per_block;
+ __le32 blocks_per_lun;
+ u8 lun_count;
+ u8 addr_cycles;
+ u8 bits_per_cell;
+ __le16 bb_per_lun;
+ __le16 block_endurance;
+ u8 guaranteed_good_blocks;
+ __le16 guaranteed_block_endurance;
+ u8 programs_per_page;
+ u8 ppage_attr;
+ u8 ecc_bits;
+ u8 interleaved_bits;
+ u8 interleaved_ops;
+ u8 reserved3[13];
+
+ /* electrical parameter block */
+ u8 io_pin_capacitance_max;
+ __le16 async_timing_mode;
+ __le16 program_cache_timing_mode;
+ __le16 t_prog;
+ __le16 t_bers;
+ __le16 t_r;
+ __le16 t_ccs;
+ __le16 src_sync_timing_mode;
+ __le16 src_ssync_features;
+ __le16 clk_pin_capacitance_typ;
+ __le16 io_pin_capacitance_typ;
+ __le16 input_pin_capacitance_typ;
+ u8 input_pin_capacitance_max;
+ u8 driver_strenght_support;
+ __le16 t_int_r;
+ __le16 t_ald;
+ u8 reserved4[7];
+
+ /* vendor */
+ u8 reserved5[90];
+
+ __le16 crc;
+} __attribute__((packed));
+
+#define ONFI_CRC_BASE 0x4F4E
+
/**
* struct nand_hw_control - Control structure for hardware controller (e.g ECC generator) shared among independent devices
* @lock: protection lock
* @active: the mtd device which holds the controller currently
- * @wq: wait queue to sleep on if a NAND operation is in progress
- * used instead of the per chip wait queue when a hw controller is available
+ * @wq: wait queue to sleep on if a NAND operation is in
+ * progress used instead of the per chip wait queue
+ * when a hw controller is available.
*/
struct nand_hw_control {
- spinlock_t lock;
+ spinlock_t lock;
struct nand_chip *active;
wait_queue_head_t wq;
};
@@ -256,51 +345,42 @@ struct nand_hw_control {
* @correct: function for ecc correction, matching to ecc generator (sw/hw)
* @read_page_raw: function to read a raw page without ECC
* @write_page_raw: function to write a raw page without ECC
- * @read_page: function to read a page according to the ecc generator requirements
+ * @read_page: function to read a page according to the ecc generator
+ * requirements.
* @read_subpage: function to read parts of the page covered by ECC.
- * @write_page: function to write a page according to the ecc generator requirements
+ * @write_page: function to write a page according to the ecc generator
+ * requirements.
* @read_oob: function to read chip OOB data
* @write_oob: function to write chip OOB data
*/
struct nand_ecc_ctrl {
- nand_ecc_modes_t mode;
- int steps;
- int size;
- int bytes;
- int total;
- int prepad;
- int postpad;
+ nand_ecc_modes_t mode;
+ int steps;
+ int size;
+ int bytes;
+ int total;
+ int prepad;
+ int postpad;
struct nand_ecclayout *layout;
- void (*hwctl)(struct mtd_info *mtd, int mode);
- int (*calculate)(struct mtd_info *mtd,
- const uint8_t *dat,
- uint8_t *ecc_code);
- int (*correct)(struct mtd_info *mtd, uint8_t *dat,
- uint8_t *read_ecc,
- uint8_t *calc_ecc);
- int (*read_page_raw)(struct mtd_info *mtd,
- struct nand_chip *chip,
- uint8_t *buf, int page);
- void (*write_page_raw)(struct mtd_info *mtd,
- struct nand_chip *chip,
- const uint8_t *buf);
- int (*read_page)(struct mtd_info *mtd,
- struct nand_chip *chip,
- uint8_t *buf, int page);
- int (*read_subpage)(struct mtd_info *mtd,
- struct nand_chip *chip,
- uint32_t offs, uint32_t len,
- uint8_t *buf);
- void (*write_page)(struct mtd_info *mtd,
- struct nand_chip *chip,
- const uint8_t *buf);
- int (*read_oob)(struct mtd_info *mtd,
- struct nand_chip *chip,
- int page,
- int sndcmd);
- int (*write_oob)(struct mtd_info *mtd,
- struct nand_chip *chip,
- int page);
+ void (*hwctl)(struct mtd_info *mtd, int mode);
+ int (*calculate)(struct mtd_info *mtd, const uint8_t *dat,
+ uint8_t *ecc_code);
+ int (*correct)(struct mtd_info *mtd, uint8_t *dat, uint8_t *read_ecc,
+ uint8_t *calc_ecc);
+ int (*read_page_raw)(struct mtd_info *mtd, struct nand_chip *chip,
+ uint8_t *buf, int page);
+ void (*write_page_raw)(struct mtd_info *mtd, struct nand_chip *chip,
+ const uint8_t *buf);
+ int (*read_page)(struct mtd_info *mtd, struct nand_chip *chip,
+ uint8_t *buf, int page);
+ int (*read_subpage)(struct mtd_info *mtd, struct nand_chip *chip,
+ uint32_t offs, uint32_t len, uint8_t *buf);
+ void (*write_page)(struct mtd_info *mtd, struct nand_chip *chip,
+ const uint8_t *buf);
+ int (*read_oob)(struct mtd_info *mtd, struct nand_chip *chip, int page,
+ int sndcmd);
+ int (*write_oob)(struct mtd_info *mtd, struct nand_chip *chip,
+ int page);
};
/**
@@ -320,102 +400,132 @@ struct nand_buffers {
/**
* struct nand_chip - NAND Private Flash Chip Data
- * @IO_ADDR_R: [BOARDSPECIFIC] address to read the 8 I/O lines of the flash device
- * @IO_ADDR_W: [BOARDSPECIFIC] address to write the 8 I/O lines of the flash device
+ * @IO_ADDR_R: [BOARDSPECIFIC] address to read the 8 I/O lines of the
+ * flash device
+ * @IO_ADDR_W: [BOARDSPECIFIC] address to write the 8 I/O lines of the
+ * flash device.
* @read_byte: [REPLACEABLE] read one byte from the chip
* @read_word: [REPLACEABLE] read one word from the chip
* @write_buf: [REPLACEABLE] write data from the buffer to the chip
* @read_buf: [REPLACEABLE] read data from the chip into the buffer
- * @verify_buf: [REPLACEABLE] verify buffer contents against the chip data
+ * @verify_buf: [REPLACEABLE] verify buffer contents against the chip
+ * data.
* @select_chip: [REPLACEABLE] select chip nr
* @block_bad: [REPLACEABLE] check, if the block is bad
* @block_markbad: [REPLACEABLE] mark the block bad
* @cmd_ctrl: [BOARDSPECIFIC] hardwarespecific funtion for controlling
* ALE/CLE/nCE. Also used to write command and address
- * @dev_ready: [BOARDSPECIFIC] hardwarespecific function for accesing device ready/busy line
- * If set to NULL no access to ready/busy is available and the ready/busy information
- * is read from the chip status register
- * @cmdfunc: [REPLACEABLE] hardwarespecific function for writing commands to the chip
- * @waitfunc: [REPLACEABLE] hardwarespecific function for wait on ready
+ * @init_size: [BOARDSPECIFIC] hardwarespecific funtion for setting
+ * mtd->oobsize, mtd->writesize and so on.
+ * @id_data contains the 8 bytes values of NAND_CMD_READID.
+ * Return with the bus width.
+ * @dev_ready: [BOARDSPECIFIC] hardwarespecific function for accesing
+ * device ready/busy line. If set to NULL no access to
+ * ready/busy is available and the ready/busy information
+ * is read from the chip status register.
+ * @cmdfunc: [REPLACEABLE] hardwarespecific function for writing
+ * commands to the chip.
+ * @waitfunc: [REPLACEABLE] hardwarespecific function for wait on
+ * ready.
* @ecc: [BOARDSPECIFIC] ecc control ctructure
* @buffers: buffer structure for read/write
* @hwcontrol: platform-specific hardware control structure
* @ops: oob operation operands
- * @erase_cmd: [INTERN] erase command write function, selectable due to AND support
+ * @erase_cmd: [INTERN] erase command write function, selectable due
+ * to AND support.
* @scan_bbt: [REPLACEABLE] function to scan bad block table
- * @chip_delay: [BOARDSPECIFIC] chip dependent delay for transfering data from array to read regs (tR)
+ * @chip_delay: [BOARDSPECIFIC] chip dependent delay for transfering
+ * data from array to read regs (tR).
* @state: [INTERN] the current state of the NAND device
* @oob_poi: poison value buffer
- * @page_shift: [INTERN] number of address bits in a page (column address bits)
+ * @page_shift: [INTERN] number of address bits in a page (column
+ * address bits).
* @phys_erase_shift: [INTERN] number of address bits in a physical eraseblock
* @bbt_erase_shift: [INTERN] number of address bits in a bbt entry
* @chip_shift: [INTERN] number of address bits in one chip
- * @options: [BOARDSPECIFIC] various chip options. They can partly be set to inform nand_scan about
- * special functionality. See the defines for further explanation
- * @badblockpos: [INTERN] position of the bad block marker in the oob area
+ * @options: [BOARDSPECIFIC] various chip options. They can partly
+ * be set to inform nand_scan about special functionality.
+ * See the defines for further explanation.
+ * @badblockpos: [INTERN] position of the bad block marker in the oob
+ * area.
* @cellinfo: [INTERN] MLC/multichip data from chip ident
* @numchips: [INTERN] number of physical chips
* @chipsize: [INTERN] the size of one chip for multichip arrays
* @pagemask: [INTERN] page number mask = number of (pages / chip) - 1
- * @pagebuf: [INTERN] holds the pagenumber which is currently in data_buf
+ * @pagebuf: [INTERN] holds the pagenumber which is currently in
+ * data_buf.
* @subpagesize: [INTERN] holds the subpagesize
+ * @onfi_version: [INTERN] holds the chip ONFI version (BCD encoded),
+ * non 0 if ONFI supported.
+ * @onfi_params: [INTERN] holds the ONFI page parameter when ONFI is
+ * supported, 0 otherwise.
* @ecclayout: [REPLACEABLE] the default ecc placement scheme
* @bbt: [INTERN] bad block table pointer
- * @bbt_td: [REPLACEABLE] bad block table descriptor for flash lookup
+ * @bbt_td: [REPLACEABLE] bad block table descriptor for flash
+ * lookup.
* @bbt_md: [REPLACEABLE] bad block table mirror descriptor
- * @badblock_pattern: [REPLACEABLE] bad block scan pattern used for initial bad block scan
- * @controller: [REPLACEABLE] a pointer to a hardware controller structure
- * which is shared among multiple independend devices
+ * @badblock_pattern: [REPLACEABLE] bad block scan pattern used for initial
+ * bad block scan.
+ * @controller: [REPLACEABLE] a pointer to a hardware controller
+ * structure which is shared among multiple independend
+ * devices.
* @priv: [OPTIONAL] pointer to private chip date
- * @errstat: [OPTIONAL] hardware specific function to perform additional error status checks
- * (determine if errors are correctable)
+ * @errstat: [OPTIONAL] hardware specific function to perform
+ * additional error status checks (determine if errors are
+ * correctable).
* @write_page: [REPLACEABLE] High-level page write function
*/
struct nand_chip {
- void __iomem *IO_ADDR_R;
- void __iomem *IO_ADDR_W;
-
- uint8_t (*read_byte)(struct mtd_info *mtd);
- u16 (*read_word)(struct mtd_info *mtd);
- void (*write_buf)(struct mtd_info *mtd, const uint8_t *buf, int len);
- void (*read_buf)(struct mtd_info *mtd, uint8_t *buf, int len);
- int (*verify_buf)(struct mtd_info *mtd, const uint8_t *buf, int len);
- void (*select_chip)(struct mtd_info *mtd, int chip);
- int (*block_bad)(struct mtd_info *mtd, loff_t ofs, int getchip);
- int (*block_markbad)(struct mtd_info *mtd, loff_t ofs);
- void (*cmd_ctrl)(struct mtd_info *mtd, int dat,
- unsigned int ctrl);
- int (*dev_ready)(struct mtd_info *mtd);
- void (*cmdfunc)(struct mtd_info *mtd, unsigned command, int column, int page_addr);
- int (*waitfunc)(struct mtd_info *mtd, struct nand_chip *this);
- void (*erase_cmd)(struct mtd_info *mtd, int page);
- int (*scan_bbt)(struct mtd_info *mtd);
- int (*errstat)(struct mtd_info *mtd, struct nand_chip *this, int state, int status, int page);
- int (*write_page)(struct mtd_info *mtd, struct nand_chip *chip,
- const uint8_t *buf, int page, int cached, int raw);
-
- int chip_delay;
- unsigned int options;
-
- int page_shift;
- int phys_erase_shift;
- int bbt_erase_shift;
- int chip_shift;
- int numchips;
- uint64_t chipsize;
- int pagemask;
- int pagebuf;
- int subpagesize;
- uint8_t cellinfo;
- int badblockpos;
- int badblockbits;
-
- flstate_t state;
-
- uint8_t *oob_poi;
- struct nand_hw_control *controller;
- struct nand_ecclayout *ecclayout;
+ void __iomem *IO_ADDR_R;
+ void __iomem *IO_ADDR_W;
+
+ uint8_t (*read_byte)(struct mtd_info *mtd);
+ u16 (*read_word)(struct mtd_info *mtd);
+ void (*write_buf)(struct mtd_info *mtd, const uint8_t *buf, int len);
+ void (*read_buf)(struct mtd_info *mtd, uint8_t *buf, int len);
+ int (*verify_buf)(struct mtd_info *mtd, const uint8_t *buf, int len);
+ void (*select_chip)(struct mtd_info *mtd, int chip);
+ int (*block_bad)(struct mtd_info *mtd, loff_t ofs, int getchip);
+ int (*block_markbad)(struct mtd_info *mtd, loff_t ofs);
+ void (*cmd_ctrl)(struct mtd_info *mtd, int dat, unsigned int ctrl);
+ int (*init_size)(struct mtd_info *mtd, struct nand_chip *this,
+ u8 *id_data);
+ int (*dev_ready)(struct mtd_info *mtd);
+ void (*cmdfunc)(struct mtd_info *mtd, unsigned command, int column,
+ int page_addr);
+ int(*waitfunc)(struct mtd_info *mtd, struct nand_chip *this);
+ void (*erase_cmd)(struct mtd_info *mtd, int page);
+ int (*scan_bbt)(struct mtd_info *mtd);
+ int (*errstat)(struct mtd_info *mtd, struct nand_chip *this, int state,
+ int status, int page);
+ int (*write_page)(struct mtd_info *mtd, struct nand_chip *chip,
+ const uint8_t *buf, int page, int cached, int raw);
+
+ int chip_delay;
+ unsigned int options;
+
+ int page_shift;
+ int phys_erase_shift;
+ int bbt_erase_shift;
+ int chip_shift;
+ int numchips;
+ uint64_t chipsize;
+ int pagemask;
+ int pagebuf;
+ int subpagesize;
+ uint8_t cellinfo;
+ int badblockpos;
+ int badblockbits;
+
+ int onfi_version;
+ struct nand_onfi_params onfi_params;
+
+ flstate_t state;
+
+ uint8_t *oob_poi;
+ struct nand_hw_control *controller;
+ struct nand_ecclayout *ecclayout;
struct nand_ecc_ctrl ecc;
struct nand_buffers *buffers;
@@ -423,13 +533,13 @@ struct nand_chip {
struct mtd_oob_ops ops;
- uint8_t *bbt;
- struct nand_bbt_descr *bbt_td;
- struct nand_bbt_descr *bbt_md;
+ uint8_t *bbt;
+ struct nand_bbt_descr *bbt_td;
+ struct nand_bbt_descr *bbt_md;
- struct nand_bbt_descr *badblock_pattern;
+ struct nand_bbt_descr *badblock_pattern;
- void *priv;
+ void *priv;
};
/*
@@ -473,7 +583,7 @@ struct nand_flash_dev {
*/
struct nand_manufacturers {
int id;
- char * name;
+ char *name;
};
extern struct nand_flash_dev nand_flash_ids[];
@@ -486,7 +596,7 @@ extern int nand_isbad_bbt(struct mtd_info *mtd, loff_t offs, int allowbbt);
extern int nand_erase_nand(struct mtd_info *mtd, struct erase_info *instr,
int allowbbt);
extern int nand_do_read(struct mtd_info *mtd, loff_t from, size_t len,
- size_t * retlen, uint8_t * buf);
+ size_t *retlen, uint8_t *buf);
/**
* struct platform_nand_chip - chip level device structure
@@ -502,17 +612,16 @@ extern int nand_do_read(struct mtd_info *mtd, loff_t from, size_t len,
* @priv: hardware controller specific settings
*/
struct platform_nand_chip {
- int nr_chips;
- int chip_offset;
- int nr_partitions;
- struct mtd_partition *partitions;
- struct nand_ecclayout *ecclayout;
- int chip_delay;
- unsigned int options;
- const char **part_probe_types;
- void (*set_parts)(uint64_t size,
- struct platform_nand_chip *chip);
- void *priv;
+ int nr_chips;
+ int chip_offset;
+ int nr_partitions;
+ struct mtd_partition *partitions;
+ struct nand_ecclayout *ecclayout;
+ int chip_delay;
+ unsigned int options;
+ const char **part_probe_types;
+ void (*set_parts)(uint64_t size, struct platform_nand_chip *chip);
+ void *priv;
};
/* Keep gcc happy */
@@ -534,18 +643,15 @@ struct platform_device;
* All fields are optional and depend on the hardware driver requirements
*/
struct platform_nand_ctrl {
- int (*probe)(struct platform_device *pdev);
- void (*remove)(struct platform_device *pdev);
- void (*hwcontrol)(struct mtd_info *mtd, int cmd);
- int (*dev_ready)(struct mtd_info *mtd);
- void (*select_chip)(struct mtd_info *mtd, int chip);
- void (*cmd_ctrl)(struct mtd_info *mtd, int dat,
- unsigned int ctrl);
- void (*write_buf)(struct mtd_info *mtd,
- const uint8_t *buf, int len);
- void (*read_buf)(struct mtd_info *mtd,
- uint8_t *buf, int len);
- void *priv;
+ int (*probe)(struct platform_device *pdev);
+ void (*remove)(struct platform_device *pdev);
+ void (*hwcontrol)(struct mtd_info *mtd, int cmd);
+ int (*dev_ready)(struct mtd_info *mtd);
+ void (*select_chip)(struct mtd_info *mtd, int chip);
+ void (*cmd_ctrl)(struct mtd_info *mtd, int dat, unsigned int ctrl);
+ void (*write_buf)(struct mtd_info *mtd, const uint8_t *buf, int len);
+ void (*read_buf)(struct mtd_info *mtd, uint8_t *buf, int len);
+ void *priv;
};
/**
@@ -554,8 +660,8 @@ struct platform_nand_ctrl {
* @ctrl: controller level device structure
*/
struct platform_nand_data {
- struct platform_nand_chip chip;
- struct platform_nand_ctrl ctrl;
+ struct platform_nand_chip chip;
+ struct platform_nand_ctrl ctrl;
};
/* Some helpers to access the data structures */
diff --git a/include/linux/mtd/partitions.h b/include/linux/mtd/partitions.h
index 274b6196091..2b54316591d 100644
--- a/include/linux/mtd/partitions.h
+++ b/include/linux/mtd/partitions.h
@@ -39,7 +39,7 @@ struct mtd_partition {
uint64_t size; /* partition size */
uint64_t offset; /* offset within the master MTD space */
uint32_t mask_flags; /* master MTD flags to mask out for this partition */
- struct nand_ecclayout *ecclayout; /* out of band layout for this partition (NAND only)*/
+ struct nand_ecclayout *ecclayout; /* out of band layout for this partition (NAND only) */
};
#define MTDPART_OFS_NXTBLK (-2)
@@ -89,4 +89,9 @@ static inline int mtd_has_cmdlinepart(void) { return 1; }
static inline int mtd_has_cmdlinepart(void) { return 0; }
#endif
+int mtd_is_master(struct mtd_info *mtd);
+int mtd_add_partition(struct mtd_info *master, char *name,
+ long long offset, long long length);
+int mtd_del_partition(struct mtd_info *master, int partno);
+
#endif
diff --git a/include/linux/tty.h b/include/linux/tty.h
index e500171c745..2a754748dd5 100644
--- a/include/linux/tty.h
+++ b/include/linux/tty.h
@@ -541,8 +541,8 @@ extern void tty_audit_exit(void);
extern void tty_audit_fork(struct signal_struct *sig);
extern void tty_audit_tiocsti(struct tty_struct *tty, char ch);
extern void tty_audit_push(struct tty_struct *tty);
-extern void tty_audit_push_task(struct task_struct *tsk,
- uid_t loginuid, u32 sessionid);
+extern int tty_audit_push_task(struct task_struct *tsk,
+ uid_t loginuid, u32 sessionid);
#else
static inline void tty_audit_add_data(struct tty_struct *tty,
unsigned char *data, size_t size)
@@ -560,9 +560,10 @@ static inline void tty_audit_fork(struct signal_struct *sig)
static inline void tty_audit_push(struct tty_struct *tty)
{
}
-static inline void tty_audit_push_task(struct task_struct *tsk,
- uid_t loginuid, u32 sessionid)
+static inline int tty_audit_push_task(struct task_struct *tsk,
+ uid_t loginuid, u32 sessionid)
{
+ return 0;
}
#endif
diff --git a/include/linux/writeback.h b/include/linux/writeback.h
index 09eec350054..0ead399e08b 100644
--- a/include/linux/writeback.h
+++ b/include/linux/writeback.h
@@ -58,7 +58,9 @@ struct writeback_control {
struct bdi_writeback;
int inode_wait(void *);
void writeback_inodes_sb(struct super_block *);
+void writeback_inodes_sb_nr(struct super_block *, unsigned long nr);
int writeback_inodes_sb_if_idle(struct super_block *);
+int writeback_inodes_sb_nr_if_idle(struct super_block *, unsigned long nr);
void sync_inodes_sb(struct super_block *);
void writeback_inodes_wb(struct bdi_writeback *wb,
struct writeback_control *wbc);
diff --git a/include/mtd/mtd-abi.h b/include/mtd/mtd-abi.h
index 4debb451463..2f7d45bcbd2 100644
--- a/include/mtd/mtd-abi.h
+++ b/include/mtd/mtd-abi.h
@@ -52,6 +52,7 @@ struct mtd_oob_buf64 {
#define MTD_NANDFLASH 4
#define MTD_DATAFLASH 6
#define MTD_UBIVOLUME 7
+#define MTD_MLCNANDFLASH 8
#define MTD_WRITEABLE 0x400 /* Device is writeable */
#define MTD_BIT_WRITEABLE 0x800 /* Single bits can be flipped */
@@ -119,7 +120,7 @@ struct otp_info {
#define OTPGETREGIONCOUNT _IOW('M', 14, int)
#define OTPGETREGIONINFO _IOW('M', 15, struct otp_info)
#define OTPLOCK _IOR('M', 16, struct otp_info)
-#define ECCGETLAYOUT _IOR('M', 17, struct nand_ecclayout)
+#define ECCGETLAYOUT _IOR('M', 17, struct nand_ecclayout_user)
#define ECCGETSTATS _IOR('M', 18, struct mtd_ecc_stats)
#define MTDFILEMODE _IO('M', 19)
#define MEMERASE64 _IOW('M', 20, struct erase_info_user64)
@@ -144,13 +145,18 @@ struct nand_oobfree {
};
#define MTD_MAX_OOBFREE_ENTRIES 8
+#define MTD_MAX_ECCPOS_ENTRIES 64
/*
- * ECC layout control structure. Exported to userspace for
- * diagnosis and to allow creation of raw images
+ * OBSOLETE: ECC layout control structure. Exported to user-space via ioctl
+ * ECCGETLAYOUT for backwards compatbility and should not be mistaken as a
+ * complete set of ECC information. The ioctl truncates the larger internal
+ * structure to retain binary compatibility with the static declaration of the
+ * ioctl. Note that the "MTD_MAX_..._ENTRIES" macros represent the max size of
+ * the user struct, not the MAX size of the internal struct nand_ecclayout.
*/
-struct nand_ecclayout {
+struct nand_ecclayout_user {
__u32 eccbytes;
- __u32 eccpos[64];
+ __u32 eccpos[MTD_MAX_ECCPOS_ENTRIES];
__u32 oobavail;
struct nand_oobfree oobfree[MTD_MAX_OOBFREE_ENTRIES];
};
diff --git a/include/mtd/mtd-user.h b/include/mtd/mtd-user.h
index aa3c2f86a91..83327c808c8 100644
--- a/include/mtd/mtd-user.h
+++ b/include/mtd/mtd-user.h
@@ -29,6 +29,6 @@ typedef struct mtd_info_user mtd_info_t;
typedef struct erase_info_user erase_info_t;
typedef struct region_info_user region_info_t;
typedef struct nand_oobinfo nand_oobinfo_t;
-typedef struct nand_ecclayout nand_ecclayout_t;
+typedef struct nand_ecclayout_user nand_ecclayout_t;
#endif /* __MTD_USER_H__ */
diff --git a/include/video/sh_mobile_lcdc.h b/include/video/sh_mobile_lcdc.h
index 55d700e8566..daabae5817c 100644
--- a/include/video/sh_mobile_lcdc.h
+++ b/include/video/sh_mobile_lcdc.h
@@ -49,7 +49,9 @@ struct sh_mobile_lcdc_sys_bus_ops {
unsigned long (*read_data)(void *handle);
};
+struct module;
struct sh_mobile_lcdc_board_cfg {
+ struct module *owner;
void *board_data;
int (*setup_sys)(void *board_data, void *sys_ops_handle,
struct sh_mobile_lcdc_sys_bus_ops *sys_ops);
@@ -70,7 +72,8 @@ struct sh_mobile_lcdc_chan_cfg {
int interface_type; /* selects RGBn or SYSn I/F, see above */
int clock_divider;
unsigned long flags; /* LCDC_FLAGS_... */
- struct fb_videomode lcd_cfg;
+ const struct fb_videomode *lcd_cfg;
+ int num_cfg;
struct sh_mobile_lcdc_lcd_size_cfg lcd_size_cfg;
struct sh_mobile_lcdc_board_cfg board_cfg;
struct sh_mobile_lcdc_sys_bus_cfg sys_bus_cfg; /* only for SYSn I/F */
diff --git a/ipc/shm.c b/ipc/shm.c
index fd658a1c2b8..7d3bb22a930 100644
--- a/ipc/shm.c
+++ b/ipc/shm.c
@@ -479,6 +479,7 @@ static inline unsigned long copy_shmid_to_user(void __user *buf, struct shmid64_
{
struct shmid_ds out;
+ memset(&out, 0, sizeof(out));
ipc64_perm_to_ipc_perm(&in->shm_perm, &out.shm_perm);
out.shm_segsz = in->shm_segsz;
out.shm_atime = in->shm_atime;
diff --git a/kernel/audit.c b/kernel/audit.c
index d96045789b5..77770a034d5 100644
--- a/kernel/audit.c
+++ b/kernel/audit.c
@@ -467,23 +467,16 @@ static int audit_prepare_user_tty(pid_t pid, uid_t loginuid, u32 sessionid)
struct task_struct *tsk;
int err;
- read_lock(&tasklist_lock);
+ rcu_read_lock();
tsk = find_task_by_vpid(pid);
- err = -ESRCH;
- if (!tsk)
- goto out;
- err = 0;
-
- spin_lock_irq(&tsk->sighand->siglock);
- if (!tsk->signal->audit_tty)
- err = -EPERM;
- spin_unlock_irq(&tsk->sighand->siglock);
- if (err)
- goto out;
-
- tty_audit_push_task(tsk, loginuid, sessionid);
-out:
- read_unlock(&tasklist_lock);
+ if (!tsk) {
+ rcu_read_unlock();
+ return -ESRCH;
+ }
+ get_task_struct(tsk);
+ rcu_read_unlock();
+ err = tty_audit_push_task(tsk, loginuid, sessionid);
+ put_task_struct(tsk);
return err;
}
@@ -506,7 +499,7 @@ int audit_send_list(void *_dest)
}
struct sk_buff *audit_make_reply(int pid, int seq, int type, int done,
- int multi, void *payload, int size)
+ int multi, const void *payload, int size)
{
struct sk_buff *skb;
struct nlmsghdr *nlh;
@@ -555,8 +548,8 @@ static int audit_send_reply_thread(void *arg)
* Allocates an skb, builds the netlink message, and sends it to the pid.
* No failure notifications.
*/
-void audit_send_reply(int pid, int seq, int type, int done, int multi,
- void *payload, int size)
+static void audit_send_reply(int pid, int seq, int type, int done, int multi,
+ const void *payload, int size)
{
struct sk_buff *skb;
struct task_struct *tsk;
@@ -880,40 +873,40 @@ static int audit_receive_msg(struct sk_buff *skb, struct nlmsghdr *nlh)
case AUDIT_TTY_GET: {
struct audit_tty_status s;
struct task_struct *tsk;
+ unsigned long flags;
- read_lock(&tasklist_lock);
+ rcu_read_lock();
tsk = find_task_by_vpid(pid);
- if (!tsk)
- err = -ESRCH;
- else {
- spin_lock_irq(&tsk->sighand->siglock);
+ if (tsk && lock_task_sighand(tsk, &flags)) {
s.enabled = tsk->signal->audit_tty != 0;
- spin_unlock_irq(&tsk->sighand->siglock);
- }
- read_unlock(&tasklist_lock);
- audit_send_reply(NETLINK_CB(skb).pid, seq, AUDIT_TTY_GET, 0, 0,
- &s, sizeof(s));
+ unlock_task_sighand(tsk, &flags);
+ } else
+ err = -ESRCH;
+ rcu_read_unlock();
+
+ if (!err)
+ audit_send_reply(NETLINK_CB(skb).pid, seq,
+ AUDIT_TTY_GET, 0, 0, &s, sizeof(s));
break;
}
case AUDIT_TTY_SET: {
struct audit_tty_status *s;
struct task_struct *tsk;
+ unsigned long flags;
if (nlh->nlmsg_len < sizeof(struct audit_tty_status))
return -EINVAL;
s = data;
if (s->enabled != 0 && s->enabled != 1)
return -EINVAL;
- read_lock(&tasklist_lock);
+ rcu_read_lock();
tsk = find_task_by_vpid(pid);
- if (!tsk)
- err = -ESRCH;
- else {
- spin_lock_irq(&tsk->sighand->siglock);
+ if (tsk && lock_task_sighand(tsk, &flags)) {
tsk->signal->audit_tty = s->enabled != 0;
- spin_unlock_irq(&tsk->sighand->siglock);
- }
- read_unlock(&tasklist_lock);
+ unlock_task_sighand(tsk, &flags);
+ } else
+ err = -ESRCH;
+ rcu_read_unlock();
break;
}
default:
diff --git a/kernel/audit.h b/kernel/audit.h
index f7206db4e13..91e7071c4d2 100644
--- a/kernel/audit.h
+++ b/kernel/audit.h
@@ -84,10 +84,7 @@ extern int audit_compare_dname_path(const char *dname, const char *path,
int *dirlen);
extern struct sk_buff * audit_make_reply(int pid, int seq, int type,
int done, int multi,
- void *payload, int size);
-extern void audit_send_reply(int pid, int seq, int type,
- int done, int multi,
- void *payload, int size);
+ const void *payload, int size);
extern void audit_panic(const char *message);
struct audit_netlink_list {
diff --git a/kernel/audit_tree.c b/kernel/audit_tree.c
index 7f18d3a4527..37b2bea170c 100644
--- a/kernel/audit_tree.c
+++ b/kernel/audit_tree.c
@@ -223,7 +223,7 @@ static void untag_chunk(struct node *p)
{
struct audit_chunk *chunk = find_chunk(p);
struct fsnotify_mark *entry = &chunk->mark;
- struct audit_chunk *new;
+ struct audit_chunk *new = NULL;
struct audit_tree *owner;
int size = chunk->count - 1;
int i, j;
@@ -232,9 +232,14 @@ static void untag_chunk(struct node *p)
spin_unlock(&hash_lock);
+ if (size)
+ new = alloc_chunk(size);
+
spin_lock(&entry->lock);
if (chunk->dead || !entry->i.inode) {
spin_unlock(&entry->lock);
+ if (new)
+ free_chunk(new);
goto out;
}
@@ -255,9 +260,9 @@ static void untag_chunk(struct node *p)
goto out;
}
- new = alloc_chunk(size);
if (!new)
goto Fallback;
+
fsnotify_duplicate_mark(&new->mark, entry);
if (fsnotify_add_mark(&new->mark, new->mark.group, new->mark.i.inode, NULL, 1)) {
free_chunk(new);
diff --git a/kernel/audit_watch.c b/kernel/audit_watch.c
index f0c9b2e7542..d2e3c786646 100644
--- a/kernel/audit_watch.c
+++ b/kernel/audit_watch.c
@@ -60,7 +60,7 @@ struct audit_parent {
};
/* fsnotify handle. */
-struct fsnotify_group *audit_watch_group;
+static struct fsnotify_group *audit_watch_group;
/* fsnotify events we care about. */
#define AUDIT_FS_WATCH (FS_MOVE | FS_CREATE | FS_DELETE | FS_DELETE_SELF |\
@@ -123,7 +123,7 @@ void audit_put_watch(struct audit_watch *watch)
}
}
-void audit_remove_watch(struct audit_watch *watch)
+static void audit_remove_watch(struct audit_watch *watch)
{
list_del(&watch->wlist);
audit_put_parent(watch->parent);
diff --git a/kernel/auditfilter.c b/kernel/auditfilter.c
index eb7675499fb..add2819af71 100644
--- a/kernel/auditfilter.c
+++ b/kernel/auditfilter.c
@@ -1252,6 +1252,18 @@ static int audit_filter_user_rules(struct netlink_skb_parms *cb,
case AUDIT_LOGINUID:
result = audit_comparator(cb->loginuid, f->op, f->val);
break;
+ case AUDIT_SUBJ_USER:
+ case AUDIT_SUBJ_ROLE:
+ case AUDIT_SUBJ_TYPE:
+ case AUDIT_SUBJ_SEN:
+ case AUDIT_SUBJ_CLR:
+ if (f->lsm_rule)
+ result = security_audit_rule_match(cb->sid,
+ f->type,
+ f->op,
+ f->lsm_rule,
+ NULL);
+ break;
}
if (!result)
diff --git a/kernel/auditsc.c b/kernel/auditsc.c
index 1b31c130d03..f49a0318c2e 100644
--- a/kernel/auditsc.c
+++ b/kernel/auditsc.c
@@ -241,6 +241,10 @@ struct audit_context {
pid_t pid;
struct audit_cap_data cap;
} capset;
+ struct {
+ int fd;
+ int flags;
+ } mmap;
};
int fds[2];
@@ -1305,6 +1309,10 @@ static void show_special(struct audit_context *context, int *call_panic)
audit_log_cap(ab, "cap_pp", &context->capset.cap.permitted);
audit_log_cap(ab, "cap_pe", &context->capset.cap.effective);
break; }
+ case AUDIT_MMAP: {
+ audit_log_format(ab, "fd=%d flags=0x%x", context->mmap.fd,
+ context->mmap.flags);
+ break; }
}
audit_log_end(ab);
}
@@ -2476,6 +2484,14 @@ void __audit_log_capset(pid_t pid,
context->type = AUDIT_CAPSET;
}
+void __audit_mmap_fd(int fd, int flags)
+{
+ struct audit_context *context = current->audit_context;
+ context->mmap.fd = fd;
+ context->mmap.flags = flags;
+ context->type = AUDIT_MMAP;
+}
+
/**
* audit_core_dumps - record information about processes that end abnormally
* @signr: signal value
diff --git a/kernel/jump_label.c b/kernel/jump_label.c
index 7be868bf25c..3b79bd93833 100644
--- a/kernel/jump_label.c
+++ b/kernel/jump_label.c
@@ -39,6 +39,16 @@ struct jump_label_module_entry {
struct module *mod;
};
+void jump_label_lock(void)
+{
+ mutex_lock(&jump_label_mutex);
+}
+
+void jump_label_unlock(void)
+{
+ mutex_unlock(&jump_label_mutex);
+}
+
static int jump_label_cmp(const void *a, const void *b)
{
const struct jump_entry *jea = a;
@@ -152,7 +162,7 @@ void jump_label_update(unsigned long key, enum jump_label_type type)
struct jump_label_module_entry *e_module;
int count;
- mutex_lock(&jump_label_mutex);
+ jump_label_lock();
entry = get_jump_label_entry((jump_label_t)key);
if (entry) {
count = entry->nr_entries;
@@ -168,13 +178,14 @@ void jump_label_update(unsigned long key, enum jump_label_type type)
count = e_module->nr_entries;
iter = e_module->table;
while (count--) {
- if (kernel_text_address(iter->code))
+ if (iter->key &&
+ kernel_text_address(iter->code))
arch_jump_label_transform(iter, type);
iter++;
}
}
}
- mutex_unlock(&jump_label_mutex);
+ jump_label_unlock();
}
static int addr_conflict(struct jump_entry *entry, void *start, void *end)
@@ -231,6 +242,7 @@ out:
* overlaps with any of the jump label patch addresses. Code
* that wants to modify kernel text should first verify that
* it does not overlap with any of the jump label addresses.
+ * Caller must hold jump_label_mutex.
*
* returns 1 if there is an overlap, 0 otherwise
*/
@@ -241,7 +253,6 @@ int jump_label_text_reserved(void *start, void *end)
struct jump_entry *iter_stop = __start___jump_table;
int conflict = 0;
- mutex_lock(&jump_label_mutex);
iter = iter_start;
while (iter < iter_stop) {
if (addr_conflict(iter, start, end)) {
@@ -256,10 +267,16 @@ int jump_label_text_reserved(void *start, void *end)
conflict = module_conflict(start, end);
#endif
out:
- mutex_unlock(&jump_label_mutex);
return conflict;
}
+/*
+ * Not all archs need this.
+ */
+void __weak arch_jump_label_text_poke_early(jump_label_t addr)
+{
+}
+
static __init int init_jump_label(void)
{
int ret;
@@ -267,7 +284,7 @@ static __init int init_jump_label(void)
struct jump_entry *iter_stop = __stop___jump_table;
struct jump_entry *iter;
- mutex_lock(&jump_label_mutex);
+ jump_label_lock();
ret = build_jump_label_hashtable(__start___jump_table,
__stop___jump_table);
iter = iter_start;
@@ -275,7 +292,7 @@ static __init int init_jump_label(void)
arch_jump_label_text_poke_early(iter->code);
iter++;
}
- mutex_unlock(&jump_label_mutex);
+ jump_label_unlock();
return ret;
}
early_initcall(init_jump_label);
@@ -366,6 +383,39 @@ static void remove_jump_label_module(struct module *mod)
}
}
+static void remove_jump_label_module_init(struct module *mod)
+{
+ struct hlist_head *head;
+ struct hlist_node *node, *node_next, *module_node, *module_node_next;
+ struct jump_label_entry *e;
+ struct jump_label_module_entry *e_module;
+ struct jump_entry *iter;
+ int i, count;
+
+ /* if the module doesn't have jump label entries, just return */
+ if (!mod->num_jump_entries)
+ return;
+
+ for (i = 0; i < JUMP_LABEL_TABLE_SIZE; i++) {
+ head = &jump_label_table[i];
+ hlist_for_each_entry_safe(e, node, node_next, head, hlist) {
+ hlist_for_each_entry_safe(e_module, module_node,
+ module_node_next,
+ &(e->modules), hlist) {
+ if (e_module->mod != mod)
+ continue;
+ count = e_module->nr_entries;
+ iter = e_module->table;
+ while (count--) {
+ if (within_module_init(iter->code, mod))
+ iter->key = 0;
+ iter++;
+ }
+ }
+ }
+ }
+}
+
static int
jump_label_module_notify(struct notifier_block *self, unsigned long val,
void *data)
@@ -375,16 +425,21 @@ jump_label_module_notify(struct notifier_block *self, unsigned long val,
switch (val) {
case MODULE_STATE_COMING:
- mutex_lock(&jump_label_mutex);
+ jump_label_lock();
ret = add_jump_label_module(mod);
if (ret)
remove_jump_label_module(mod);
- mutex_unlock(&jump_label_mutex);
+ jump_label_unlock();
break;
case MODULE_STATE_GOING:
- mutex_lock(&jump_label_mutex);
+ jump_label_lock();
remove_jump_label_module(mod);
- mutex_unlock(&jump_label_mutex);
+ jump_label_unlock();
+ break;
+ case MODULE_STATE_LIVE:
+ jump_label_lock();
+ remove_jump_label_module_init(mod);
+ jump_label_unlock();
break;
}
return ret;
diff --git a/kernel/kprobes.c b/kernel/kprobes.c
index 99865c33a60..9737a76e106 100644
--- a/kernel/kprobes.c
+++ b/kernel/kprobes.c
@@ -1145,14 +1145,13 @@ int __kprobes register_kprobe(struct kprobe *p)
if (ret)
return ret;
+ jump_label_lock();
preempt_disable();
if (!kernel_text_address((unsigned long) p->addr) ||
in_kprobes_functions((unsigned long) p->addr) ||
ftrace_text_reserved(p->addr, p->addr) ||
- jump_label_text_reserved(p->addr, p->addr)) {
- preempt_enable();
- return -EINVAL;
- }
+ jump_label_text_reserved(p->addr, p->addr))
+ goto fail_with_jump_label;
/* User can pass only KPROBE_FLAG_DISABLED to register_kprobe */
p->flags &= KPROBE_FLAG_DISABLED;
@@ -1166,10 +1165,9 @@ int __kprobes register_kprobe(struct kprobe *p)
* We must hold a refcount of the probed module while updating
* its code to prohibit unexpected unloading.
*/
- if (unlikely(!try_module_get(probed_mod))) {
- preempt_enable();
- return -EINVAL;
- }
+ if (unlikely(!try_module_get(probed_mod)))
+ goto fail_with_jump_label;
+
/*
* If the module freed .init.text, we couldn't insert
* kprobes in there.
@@ -1177,16 +1175,18 @@ int __kprobes register_kprobe(struct kprobe *p)
if (within_module_init((unsigned long)p->addr, probed_mod) &&
probed_mod->state != MODULE_STATE_COMING) {
module_put(probed_mod);
- preempt_enable();
- return -EINVAL;
+ goto fail_with_jump_label;
}
}
preempt_enable();
+ jump_label_unlock();
p->nmissed = 0;
INIT_LIST_HEAD(&p->list);
mutex_lock(&kprobe_mutex);
+ jump_label_lock(); /* needed to call jump_label_text_reserved() */
+
get_online_cpus(); /* For avoiding text_mutex deadlock. */
mutex_lock(&text_mutex);
@@ -1214,12 +1214,18 @@ int __kprobes register_kprobe(struct kprobe *p)
out:
mutex_unlock(&text_mutex);
put_online_cpus();
+ jump_label_unlock();
mutex_unlock(&kprobe_mutex);
if (probed_mod)
module_put(probed_mod);
return ret;
+
+fail_with_jump_label:
+ preempt_enable();
+ jump_label_unlock();
+ return -EINVAL;
}
EXPORT_SYMBOL_GPL(register_kprobe);
diff --git a/mm/mmap.c b/mm/mmap.c
index 00161a48a45..b179abb1474 100644
--- a/mm/mmap.c
+++ b/mm/mmap.c
@@ -28,6 +28,7 @@
#include <linux/rmap.h>
#include <linux/mmu_notifier.h>
#include <linux/perf_event.h>
+#include <linux/audit.h>
#include <asm/uaccess.h>
#include <asm/cacheflush.h>
@@ -1108,6 +1109,7 @@ SYSCALL_DEFINE6(mmap_pgoff, unsigned long, addr, unsigned long, len,
unsigned long retval = -EBADF;
if (!(flags & MAP_ANONYMOUS)) {
+ audit_mmap_fd(fd, flags);
if (unlikely(flags & MAP_HUGETLB))
return -EINVAL;
file = fget(fd);
diff --git a/mm/nommu.c b/mm/nommu.c
index 30b5c20eec1..3613517c759 100644
--- a/mm/nommu.c
+++ b/mm/nommu.c
@@ -29,6 +29,7 @@
#include <linux/personality.h>
#include <linux/security.h>
#include <linux/syscalls.h>
+#include <linux/audit.h>
#include <asm/uaccess.h>
#include <asm/tlb.h>
@@ -1458,6 +1459,7 @@ SYSCALL_DEFINE6(mmap_pgoff, unsigned long, addr, unsigned long, len,
struct file *file = NULL;
unsigned long retval = -EBADF;
+ audit_mmap_fd(fd, flags);
if (!(flags & MAP_ANONYMOUS)) {
file = fget(fd);
if (!file)