summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--arch/arm/Kconfig2
-rw-r--r--arch/arm/common/Kconfig3
-rw-r--r--arch/arm/common/Makefile1
-rw-r--r--arch/arm/common/sa1111.c281
-rw-r--r--arch/arm/include/asm/hardware/sa1111.h156
-rw-r--r--arch/arm/kernel/Makefile1
-rw-r--r--arch/arm/mach-ebsa110/core.c13
-rw-r--r--arch/arm/mach-ebsa110/core.h41
-rw-r--r--arch/arm/mach-ebsa110/include/mach/hardware.h39
-rw-r--r--arch/arm/mach-ebsa110/io.c20
-rw-r--r--arch/arm/mach-ebsa110/leds.c2
-rw-r--r--arch/arm/mach-pxa/lubbock.c1
-rw-r--r--arch/arm/mach-rpc/Makefile2
-rw-r--r--arch/arm/mach-rpc/ecard.c (renamed from arch/arm/kernel/ecard.c)134
-rw-r--r--arch/arm/mach-rpc/ecard.h (renamed from arch/arm/kernel/ecard.h)0
-rw-r--r--arch/arm/mach-rpc/include/mach/irqs.h2
-rw-r--r--arch/arm/mach-rpc/riscpc.c45
-rw-r--r--arch/arm/mach-rpc/time.c (renamed from arch/arm/common/time-acorn.c)2
-rw-r--r--arch/arm/mach-sa1100/Makefile2
-rw-r--r--arch/arm/mach-sa1100/assabet.c194
-rw-r--r--arch/arm/mach-sa1100/badge4.c42
-rw-r--r--arch/arm/mach-sa1100/cerf.c17
-rw-r--r--arch/arm/mach-sa1100/collie.c55
-rw-r--r--arch/arm/mach-sa1100/dma.c348
-rw-r--r--arch/arm/mach-sa1100/generic.c151
-rw-r--r--arch/arm/mach-sa1100/generic.h7
-rw-r--r--arch/arm/mach-sa1100/h3100.c25
-rw-r--r--arch/arm/mach-sa1100/h3600.c34
-rw-r--r--arch/arm/mach-sa1100/h3xxx.c13
-rw-r--r--arch/arm/mach-sa1100/hackkit.c13
-rw-r--r--arch/arm/mach-sa1100/include/mach/SA-1100.h229
-rw-r--r--arch/arm/mach-sa1100/include/mach/dma.h117
-rw-r--r--arch/arm/mach-sa1100/include/mach/irqs.h27
-rw-r--r--arch/arm/mach-sa1100/include/mach/mcp.h2
-rw-r--r--arch/arm/mach-sa1100/include/mach/neponset.h52
-rw-r--r--arch/arm/mach-sa1100/include/mach/shannon.h2
-rw-r--r--arch/arm/mach-sa1100/irq.c8
-rw-r--r--arch/arm/mach-sa1100/jornada720.c46
-rw-r--r--arch/arm/mach-sa1100/lart.c82
-rw-r--r--arch/arm/mach-sa1100/nanoengine.c13
-rw-r--r--arch/arm/mach-sa1100/neponset.c549
-rw-r--r--arch/arm/mach-sa1100/pci-nanoengine.c8
-rw-r--r--arch/arm/mach-sa1100/pleb.c25
-rw-r--r--arch/arm/mach-sa1100/shannon.c27
-rw-r--r--arch/arm/mach-sa1100/simpad.c24
-rw-r--r--arch/arm/mach-sa1100/sleep.S37
-rw-r--r--arch/arm/mach-sa1100/ssp.c2
-rw-r--r--arch/arm/mach-sa1100/time.c1
-rw-r--r--drivers/dma/Kconfig9
-rw-r--r--drivers/dma/Makefile1
-rw-r--r--drivers/dma/sa11x0-dma.c1109
-rw-r--r--drivers/gpio/gpio-sa1100.c1
-rw-r--r--drivers/input/keyboard/jornada720_kbd.c1
-rw-r--r--drivers/input/serio/rpckbd.c44
-rw-r--r--drivers/input/serio/sa1111ps2.c59
-rw-r--r--drivers/input/touchscreen/jornada720_ts.c1
-rw-r--r--drivers/mfd/Kconfig5
-rw-r--r--drivers/mfd/mcp-core.c49
-rw-r--r--drivers/mfd/mcp-sa11x0.c198
-rw-r--r--drivers/mfd/ucb1x00-assabet.c46
-rw-r--r--drivers/mfd/ucb1x00-core.c433
-rw-r--r--drivers/mfd/ucb1x00-ts.c39
-rw-r--r--drivers/mtd/maps/sa1100-flash.c112
-rw-r--r--drivers/net/ethernet/smsc/smc91x.c2
-rw-r--r--drivers/net/irda/Kconfig2
-rw-r--r--drivers/net/irda/sa1100_ir.c953
-rw-r--r--drivers/pcmcia/sa1111_generic.c55
-rw-r--r--drivers/pcmcia/sa1111_neponset.c7
-rw-r--r--drivers/rtc/rtc-sa1100.c2
-rw-r--r--drivers/scsi/arm/arxescsi.c2
-rw-r--r--drivers/scsi/arm/fas216.c4
-rw-r--r--drivers/scsi/arm/fas216.h4
-rw-r--r--drivers/tty/serial/sa1100.c1
-rw-r--r--drivers/usb/host/ohci-sa1111.c297
-rw-r--r--drivers/video/sa1100fb.c493
-rw-r--r--drivers/video/sa1100fb.h76
-rw-r--r--include/linux/mfd/mcp.h14
-rw-r--r--include/linux/mfd/ucb1x00.h38
-rw-r--r--include/linux/sa11x0-dma.h24
-rw-r--r--include/video/sa1100fb.h63
80 files changed, 3793 insertions, 3248 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 94422601ea5..5098564d587 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -738,7 +738,6 @@ config ARCH_RPC
bool "RiscPC"
select ARCH_ACORN
select FIQ
- select TIMER_ACORN
select ARCH_MAY_HAVE_PC_FDC
select HAVE_PATA_PLATFORM
select ISA_DMA_API
@@ -767,6 +766,7 @@ config ARCH_SA1100
select ARCH_REQUIRE_GPIOLIB
select HAVE_IDE
select NEED_MACH_MEMORY_H
+ select SPARSE_IRQ
help
Support for StrongARM 11x0 based boards.
diff --git a/arch/arm/common/Kconfig b/arch/arm/common/Kconfig
index 81a933eb090..3bb1d7589bd 100644
--- a/arch/arm/common/Kconfig
+++ b/arch/arm/common/Kconfig
@@ -35,9 +35,6 @@ config DMABOUNCE
bool
select ZONE_DMA
-config TIMER_ACORN
- bool
-
config SHARP_LOCOMO
bool
diff --git a/arch/arm/common/Makefile b/arch/arm/common/Makefile
index 6ea9b6f3607..69feafe7286 100644
--- a/arch/arm/common/Makefile
+++ b/arch/arm/common/Makefile
@@ -9,7 +9,6 @@ obj-$(CONFIG_PL330) += pl330.o
obj-$(CONFIG_SA1111) += sa1111.o
obj-$(CONFIG_PCI_HOST_VIA82C505) += via82c505.o
obj-$(CONFIG_DMABOUNCE) += dmabounce.o
-obj-$(CONFIG_TIMER_ACORN) += time-acorn.o
obj-$(CONFIG_SHARP_LOCOMO) += locomo.o
obj-$(CONFIG_SHARP_PARAM) += sharpsl_param.o
obj-$(CONFIG_SHARP_SCOOP) += scoop.o
diff --git a/arch/arm/common/sa1111.c b/arch/arm/common/sa1111.c
index 61691cdbdcf..9173d112ea0 100644
--- a/arch/arm/common/sa1111.c
+++ b/arch/arm/common/sa1111.c
@@ -16,6 +16,7 @@
*/
#include <linux/module.h>
#include <linux/init.h>
+#include <linux/irq.h>
#include <linux/kernel.h>
#include <linux/delay.h>
#include <linux/errno.h>
@@ -28,9 +29,8 @@
#include <linux/io.h>
#include <mach/hardware.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
#include <asm/mach/irq.h>
+#include <asm/mach-types.h>
#include <asm/sizes.h>
#include <asm/hardware/sa1111.h>
@@ -86,8 +86,10 @@
#define IRQ_S1_CD_VALID (52)
#define IRQ_S0_BVD1_STSCHG (53)
#define IRQ_S1_BVD1_STSCHG (54)
+#define SA1111_IRQ_NR (55)
-extern void __init sa1110_mb_enable(void);
+extern void sa1110_mb_enable(void);
+extern void sa1110_mb_disable(void);
/*
* We keep the following data for the overall SA1111. Note that the
@@ -104,6 +106,7 @@ struct sa1111 {
int irq_base; /* base for cascaded on-chip IRQs */
spinlock_t lock;
void __iomem *base;
+ struct sa1111_platform_data *pdata;
#ifdef CONFIG_PM
void *saved_state;
#endif
@@ -118,6 +121,7 @@ static struct sa1111 *g_sa1111;
struct sa1111_dev_info {
unsigned long offset;
unsigned long skpcr_mask;
+ bool dma;
unsigned int devid;
unsigned int irq[6];
};
@@ -126,6 +130,7 @@ static struct sa1111_dev_info sa1111_devices[] = {
{
.offset = SA1111_USB,
.skpcr_mask = SKPCR_UCLKEN,
+ .dma = true,
.devid = SA1111_DEVID_USB,
.irq = {
IRQ_USBPWR,
@@ -139,6 +144,7 @@ static struct sa1111_dev_info sa1111_devices[] = {
{
.offset = 0x0600,
.skpcr_mask = SKPCR_I2SCLKEN | SKPCR_L3CLKEN,
+ .dma = true,
.devid = SA1111_DEVID_SAC,
.irq = {
AUDXMTDMADONEA,
@@ -155,7 +161,7 @@ static struct sa1111_dev_info sa1111_devices[] = {
{
.offset = SA1111_KBD,
.skpcr_mask = SKPCR_PTCLKEN,
- .devid = SA1111_DEVID_PS2,
+ .devid = SA1111_DEVID_PS2_KBD,
.irq = {
IRQ_TPRXINT,
IRQ_TPTXINT
@@ -164,7 +170,7 @@ static struct sa1111_dev_info sa1111_devices[] = {
{
.offset = SA1111_MSE,
.skpcr_mask = SKPCR_PMCLKEN,
- .devid = SA1111_DEVID_PS2,
+ .devid = SA1111_DEVID_PS2_MSE,
.irq = {
IRQ_MSRXINT,
IRQ_MSTXINT
@@ -434,16 +440,28 @@ static struct irq_chip sa1111_high_chip = {
.irq_set_wake = sa1111_wake_highirq,
};
-static void sa1111_setup_irq(struct sa1111 *sachip)
+static int sa1111_setup_irq(struct sa1111 *sachip, unsigned irq_base)
{
void __iomem *irqbase = sachip->base + SA1111_INTC;
- unsigned int irq;
+ unsigned i, irq;
+ int ret;
/*
* We're guaranteed that this region hasn't been taken.
*/
request_mem_region(sachip->phys + SA1111_INTC, 512, "irq");
+ ret = irq_alloc_descs(-1, irq_base, SA1111_IRQ_NR, -1);
+ if (ret <= 0) {
+ dev_err(sachip->dev, "unable to allocate %u irqs: %d\n",
+ SA1111_IRQ_NR, ret);
+ if (ret == 0)
+ ret = -EINVAL;
+ return ret;
+ }
+
+ sachip->irq_base = ret;
+
/* disable all IRQs */
sa1111_writel(0, irqbase + SA1111_INTEN0);
sa1111_writel(0, irqbase + SA1111_INTEN1);
@@ -463,14 +481,16 @@ static void sa1111_setup_irq(struct sa1111 *sachip)
sa1111_writel(~0, irqbase + SA1111_INTSTATCLR0);
sa1111_writel(~0, irqbase + SA1111_INTSTATCLR1);
- for (irq = IRQ_GPAIN0; irq <= SSPROR; irq++) {
+ for (i = IRQ_GPAIN0; i <= SSPROR; i++) {
+ irq = sachip->irq_base + i;
irq_set_chip_and_handler(irq, &sa1111_low_chip,
handle_edge_irq);
irq_set_chip_data(irq, sachip);
set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
}
- for (irq = AUDXMTDMADONEA; irq <= IRQ_S1_BVD1_STSCHG; irq++) {
+ for (i = AUDXMTDMADONEA; i <= IRQ_S1_BVD1_STSCHG; i++) {
+ irq = sachip->irq_base + i;
irq_set_chip_and_handler(irq, &sa1111_high_chip,
handle_edge_irq);
irq_set_chip_data(irq, sachip);
@@ -483,6 +503,11 @@ static void sa1111_setup_irq(struct sa1111 *sachip)
irq_set_irq_type(sachip->irq, IRQ_TYPE_EDGE_RISING);
irq_set_handler_data(sachip->irq, sachip);
irq_set_chained_handler(sachip->irq, sa1111_irq_handler);
+
+ dev_info(sachip->dev, "Providing IRQ%u-%u\n",
+ sachip->irq_base, sachip->irq_base + SA1111_IRQ_NR - 1);
+
+ return 0;
}
/*
@@ -581,41 +606,10 @@ sa1111_configure_smc(struct sa1111 *sachip, int sdram, unsigned int drac,
}
#endif
-#ifdef CONFIG_DMABOUNCE
-/*
- * According to the "Intel StrongARM SA-1111 Microprocessor Companion
- * Chip Specification Update" (June 2000), erratum #7, there is a
- * significant bug in the SA1111 SDRAM shared memory controller. If
- * an access to a region of memory above 1MB relative to the bank base,
- * it is important that address bit 10 _NOT_ be asserted. Depending
- * on the configuration of the RAM, bit 10 may correspond to one
- * of several different (processor-relative) address bits.
- *
- * This routine only identifies whether or not a given DMA address
- * is susceptible to the bug.
- *
- * This should only get called for sa1111_device types due to the
- * way we configure our device dma_masks.
- */
-static int sa1111_needs_bounce(struct device *dev, dma_addr_t addr, size_t size)
-{
- /*
- * Section 4.6 of the "Intel StrongARM SA-1111 Development Module
- * User's Guide" mentions that jumpers R51 and R52 control the
- * target of SA-1111 DMA (either SDRAM bank 0 on Assabet, or
- * SDRAM bank 1 on Neponset). The default configuration selects
- * Assabet, so any address in bank 1 is necessarily invalid.
- */
- return (machine_is_assabet() || machine_is_pfs168()) &&
- (addr >= 0xc8000000 || (addr + size) >= 0xc8000000);
-}
-#endif
-
static void sa1111_dev_release(struct device *_dev)
{
struct sa1111_dev *dev = SA1111_DEV(_dev);
- release_resource(&dev->res);
kfree(dev);
}
@@ -624,67 +618,58 @@ sa1111_init_one_child(struct sa1111 *sachip, struct resource *parent,
struct sa1111_dev_info *info)
{
struct sa1111_dev *dev;
+ unsigned i;
int ret;
dev = kzalloc(sizeof(struct sa1111_dev), GFP_KERNEL);
if (!dev) {
ret = -ENOMEM;
- goto out;
+ goto err_alloc;
}
+ device_initialize(&dev->dev);
dev_set_name(&dev->dev, "%4.4lx", info->offset);
dev->devid = info->devid;
dev->dev.parent = sachip->dev;
dev->dev.bus = &sa1111_bus_type;
dev->dev.release = sa1111_dev_release;
- dev->dev.coherent_dma_mask = sachip->dev->coherent_dma_mask;
dev->res.start = sachip->phys + info->offset;
dev->res.end = dev->res.start + 511;
dev->res.name = dev_name(&dev->dev);
dev->res.flags = IORESOURCE_MEM;
dev->mapbase = sachip->base + info->offset;
dev->skpcr_mask = info->skpcr_mask;
- memmove(dev->irq, info->irq, sizeof(dev->irq));
-
- ret = request_resource(parent, &dev->res);
- if (ret) {
- printk("SA1111: failed to allocate resource for %s\n",
- dev->res.name);
- dev_set_name(&dev->dev, NULL);
- kfree(dev);
- goto out;
- }
-
- ret = device_register(&dev->dev);
- if (ret) {
- release_resource(&dev->res);
- kfree(dev);
- goto out;
- }
+ for (i = 0; i < ARRAY_SIZE(info->irq); i++)
+ dev->irq[i] = sachip->irq_base + info->irq[i];
-#ifdef CONFIG_DMABOUNCE
/*
- * If the parent device has a DMA mask associated with it,
- * propagate it down to the children.
+ * If the parent device has a DMA mask associated with it, and
+ * this child supports DMA, propagate it down to the children.
*/
- if (sachip->dev->dma_mask) {
+ if (info->dma && sachip->dev->dma_mask) {
dev->dma_mask = *sachip->dev->dma_mask;
dev->dev.dma_mask = &dev->dma_mask;
+ dev->dev.coherent_dma_mask = sachip->dev->coherent_dma_mask;
+ }
- if (dev->dma_mask != 0xffffffffUL) {
- ret = dmabounce_register_dev(&dev->dev, 1024, 4096,
- sa1111_needs_bounce);
- if (ret) {
- dev_err(&dev->dev, "SA1111: Failed to register"
- " with dmabounce\n");
- device_unregister(&dev->dev);
- }
- }
+ ret = request_resource(parent, &dev->res);
+ if (ret) {
+ dev_err(sachip->dev, "failed to allocate resource for %s\n",
+ dev->res.name);
+ goto err_resource;
}
-#endif
-out:
+ ret = device_add(&dev->dev);
+ if (ret)
+ goto err_add;
+ return 0;
+
+ err_add:
+ release_resource(&dev->res);
+ err_resource:
+ put_device(&dev->dev);
+ err_alloc:
return ret;
}
@@ -698,16 +683,21 @@ out:
* Returns:
* %-ENODEV device not found.
* %-EBUSY physical address already marked in-use.
+ * %-EINVAL no platform data passed
* %0 successful.
*/
static int __devinit
__sa1111_probe(struct device *me, struct resource *mem, int irq)
{
+ struct sa1111_platform_data *pd = me->platform_data;
struct sa1111 *sachip;
unsigned long id;
unsigned int has_devs;
int i, ret = -ENODEV;
+ if (!pd)
+ return -EINVAL;
+
sachip = kzalloc(sizeof(struct sa1111), GFP_KERNEL);
if (!sachip)
return -ENOMEM;
@@ -727,6 +717,7 @@ __sa1111_probe(struct device *me, struct resource *mem, int irq)
sachip->dev = me;
dev_set_drvdata(sachip->dev, sachip);
+ sachip->pdata = pd;
sachip->phys = mem->start;
sachip->irq = irq;
@@ -759,6 +750,16 @@ __sa1111_probe(struct device *me, struct resource *mem, int irq)
*/
sa1111_wake(sachip);
+ /*
+ * The interrupt controller must be initialised before any
+ * other device to ensure that the interrupts are available.
+ */
+ if (sachip->irq != NO_IRQ) {
+ ret = sa1111_setup_irq(sachip, pd->irq_base);
+ if (ret)
+ goto err_unmap;
+ }
+
#ifdef CONFIG_ARCH_SA1100
{
unsigned int val;
@@ -789,24 +790,14 @@ __sa1111_probe(struct device *me, struct resource *mem, int irq)
}
#endif
- /*
- * The interrupt controller must be initialised before any
- * other device to ensure that the interrupts are available.
- */
- if (sachip->irq != NO_IRQ)
- sa1111_setup_irq(sachip);
-
g_sa1111 = sachip;
has_devs = ~0;
- if (machine_is_assabet() || machine_is_jornada720() ||
- machine_is_badge4())
- has_devs &= ~(1 << 4);
- else
- has_devs &= ~(1 << 1);
+ if (pd)
+ has_devs &= ~pd->disable_devs;
for (i = 0; i < ARRAY_SIZE(sa1111_devices); i++)
- if (has_devs & (1 << i))
+ if (sa1111_devices[i].devid & has_devs)
sa1111_init_one_child(sachip, mem, &sa1111_devices[i]);
return 0;
@@ -824,7 +815,10 @@ __sa1111_probe(struct device *me, struct resource *mem, int irq)
static int sa1111_remove_one(struct device *dev, void *data)
{
- device_unregister(dev);
+ struct sa1111_dev *sadev = SA1111_DEV(dev);
+ device_del(&sadev->dev);
+ release_resource(&sadev->res);
+ put_device(&sadev->dev);
return 0;
}
@@ -846,6 +840,7 @@ static void __sa1111_remove(struct sa1111 *sachip)
if (sachip->irq != NO_IRQ) {
irq_set_chained_handler(sachip->irq, NULL);
irq_set_handler_data(sachip->irq, NULL);
+ irq_free_descs(sachip->irq_base, SA1111_IRQ_NR);
release_mem_region(sachip->phys + SA1111_INTC, 512);
}
@@ -904,6 +899,9 @@ static int sa1111_suspend(struct platform_device *dev, pm_message_t state)
save->skpwm0 = sa1111_readl(base + SA1111_SKPWM0);
save->skpwm1 = sa1111_readl(base + SA1111_SKPWM1);
+ sa1111_writel(0, sachip->base + SA1111_SKPWM0);
+ sa1111_writel(0, sachip->base + SA1111_SKPWM1);
+
base = sachip->base + SA1111_INTC;
save->intpol0 = sa1111_readl(base + SA1111_INTPOL0);
save->intpol1 = sa1111_readl(base + SA1111_INTPOL1);
@@ -919,13 +917,15 @@ static int sa1111_suspend(struct platform_device *dev, pm_message_t state)
*/
val = sa1111_readl(sachip->base + SA1111_SKCR);
sa1111_writel(val | SKCR_SLEEP, sachip->base + SA1111_SKCR);
- sa1111_writel(0, sachip->base + SA1111_SKPWM0);
- sa1111_writel(0, sachip->base + SA1111_SKPWM1);
clk_disable(sachip->clk);
spin_unlock_irqrestore(&sachip->lock, flags);
+#ifdef CONFIG_ARCH_SA1100
+ sa1110_mb_disable();
+#endif
+
return 0;
}
@@ -966,6 +966,11 @@ static int sa1111_resume(struct platform_device *dev)
*/
sa1111_wake(sachip);
+#ifdef CONFIG_ARCH_SA1100
+ /* Enable the memory bus request/grant signals */
+ sa1110_mb_enable();
+#endif
+
/*
* Only lock for write ops. Also, sa1111_wake must be called with
* released spinlock!
@@ -1053,6 +1058,7 @@ static struct platform_driver sa1111_device_driver = {
.resume = sa1111_resume,
.driver = {
.name = "sa1111",
+ .owner = THIS_MODULE,
},
};
@@ -1238,16 +1244,23 @@ EXPORT_SYMBOL(sa1111_set_sleep_io);
* sa1111_enable_device - enable an on-chip SA1111 function block
* @sadev: SA1111 function block device to enable
*/
-void sa1111_enable_device(struct sa1111_dev *sadev)
+int sa1111_enable_device(struct sa1111_dev *sadev)
{
struct sa1111 *sachip = sa1111_chip_driver(sadev);
unsigned long flags;
unsigned int val;
+ int ret = 0;
- spin_lock_irqsave(&sachip->lock, flags);
- val = sa1111_readl(sachip->base + SA1111_SKPCR);
- sa1111_writel(val | sadev->skpcr_mask, sachip->base + SA1111_SKPCR);
- spin_unlock_irqrestore(&sachip->lock, flags);
+ if (sachip->pdata && sachip->pdata->enable)
+ ret = sachip->pdata->enable(sachip->pdata->data, sadev->devid);
+
+ if (ret == 0) {
+ spin_lock_irqsave(&sachip->lock, flags);
+ val = sa1111_readl(sachip->base + SA1111_SKPCR);
+ sa1111_writel(val | sadev->skpcr_mask, sachip->base + SA1111_SKPCR);
+ spin_unlock_irqrestore(&sachip->lock, flags);
+ }
+ return ret;
}
EXPORT_SYMBOL(sa1111_enable_device);
@@ -1265,6 +1278,9 @@ void sa1111_disable_device(struct sa1111_dev *sadev)
val = sa1111_readl(sachip->base + SA1111_SKPCR);
sa1111_writel(val & ~sadev->skpcr_mask, sachip->base + SA1111_SKPCR);
spin_unlock_irqrestore(&sachip->lock, flags);
+
+ if (sachip->pdata && sachip->pdata->disable)
+ sachip->pdata->disable(sachip->pdata->data, sadev->devid);
}
EXPORT_SYMBOL(sa1111_disable_device);
@@ -1279,7 +1295,7 @@ static int sa1111_match(struct device *_dev, struct device_driver *_drv)
struct sa1111_dev *dev = SA1111_DEV(_dev);
struct sa1111_driver *drv = SA1111_DRV(_drv);
- return dev->devid == drv->devid;
+ return dev->devid & drv->devid;
}
static int sa1111_bus_suspend(struct device *dev, pm_message_t state)
@@ -1304,6 +1320,14 @@ static int sa1111_bus_resume(struct device *dev)
return ret;
}
+static void sa1111_bus_shutdown(struct device *dev)
+{
+ struct sa1111_driver *drv = SA1111_DRV(dev->driver);
+
+ if (drv && drv->shutdown)
+ drv->shutdown(SA1111_DEV(dev));
+}
+
static int sa1111_bus_probe(struct device *dev)
{
struct sa1111_dev *sadev = SA1111_DEV(dev);
@@ -1333,6 +1357,7 @@ struct bus_type sa1111_bus_type = {
.remove = sa1111_bus_remove,
.suspend = sa1111_bus_suspend,
.resume = sa1111_bus_resume,
+ .shutdown = sa1111_bus_shutdown,
};
EXPORT_SYMBOL(sa1111_bus_type);
@@ -1349,9 +1374,70 @@ void sa1111_driver_unregister(struct sa1111_driver *driver)
}
EXPORT_SYMBOL(sa1111_driver_unregister);
+#ifdef CONFIG_DMABOUNCE
+/*
+ * According to the "Intel StrongARM SA-1111 Microprocessor Companion
+ * Chip Specification Update" (June 2000), erratum #7, there is a
+ * significant bug in the SA1111 SDRAM shared memory controller. If
+ * an access to a region of memory above 1MB relative to the bank base,
+ * it is important that address bit 10 _NOT_ be asserted. Depending
+ * on the configuration of the RAM, bit 10 may correspond to one
+ * of several different (processor-relative) address bits.
+ *
+ * This routine only identifies whether or not a given DMA address
+ * is susceptible to the bug.
+ *
+ * This should only get called for sa1111_device types due to the
+ * way we configure our device dma_masks.
+ */
+static int sa1111_needs_bounce(struct device *dev, dma_addr_t addr, size_t size)
+{
+ /*
+ * Section 4.6 of the "Intel StrongARM SA-1111 Development Module
+ * User's Guide" mentions that jumpers R51 and R52 control the
+ * target of SA-1111 DMA (either SDRAM bank 0 on Assabet, or
+ * SDRAM bank 1 on Neponset). The default configuration selects
+ * Assabet, so any address in bank 1 is necessarily invalid.
+ */
+ return (machine_is_assabet() || machine_is_pfs168()) &&
+ (addr >= 0xc8000000 || (addr + size) >= 0xc8000000);
+}
+
+static int sa1111_notifier_call(struct notifier_block *n, unsigned long action,
+ void *data)
+{
+ struct sa1111_dev *dev = SA1111_DEV(data);
+
+ switch (action) {
+ case BUS_NOTIFY_ADD_DEVICE:
+ if (dev->dev.dma_mask && dev->dma_mask < 0xffffffffUL) {
+ int ret = dmabounce_register_dev(&dev->dev, 1024, 4096,
+ sa1111_needs_bounce);
+ if (ret)
+ dev_err(&dev->dev, "failed to register with dmabounce: %d\n", ret);
+ }
+ break;
+
+ case BUS_NOTIFY_DEL_DEVICE:
+ if (dev->dev.dma_mask && dev->dma_mask < 0xffffffffUL)
+ dmabounce_unregister_dev(&dev->dev);
+ break;
+ }
+ return NOTIFY_OK;
+}
+
+static struct notifier_block sa1111_bus_notifier = {
+ .notifier_call = sa1111_notifier_call,
+};
+#endif
+
static int __init sa1111_init(void)
{
int ret = bus_register(&sa1111_bus_type);
+#ifdef CONFIG_DMABOUNCE
+ if (ret == 0)
+ bus_register_notifier(&sa1111_bus_type, &sa1111_bus_notifier);
+#endif
if (ret == 0)
platform_driver_register(&sa1111_device_driver);
return ret;
@@ -1360,6 +1446,9 @@ static int __init sa1111_init(void)
static void __exit sa1111_exit(void)
{
platform_driver_unregister(&sa1111_device_driver);
+#ifdef CONFIG_DMABOUNCE
+ bus_unregister_notifier(&sa1111_bus_type, &sa1111_bus_notifier);
+#endif
bus_unregister(&sa1111_bus_type);
}
diff --git a/arch/arm/include/asm/hardware/sa1111.h b/arch/arm/include/asm/hardware/sa1111.h
index 92ed254c175..7c2bbc7f0be 100644
--- a/arch/arm/include/asm/hardware/sa1111.h
+++ b/arch/arm/include/asm/hardware/sa1111.h
@@ -132,34 +132,10 @@
#define SKPCR_DCLKEN (1<<7)
#define SKPCR_PWMCLKEN (1<<8)
-/*
- * USB Host controller
- */
+/* USB Host controller */
#define SA1111_USB 0x0400
/*
- * Offsets from SA1111_USB_BASE
- */
-#define SA1111_USB_STATUS 0x0118
-#define SA1111_USB_RESET 0x011c
-#define SA1111_USB_IRQTEST 0x0120
-
-#define USB_RESET_FORCEIFRESET (1 << 0)
-#define USB_RESET_FORCEHCRESET (1 << 1)
-#define USB_RESET_CLKGENRESET (1 << 2)
-#define USB_RESET_SIMSCALEDOWN (1 << 3)
-#define USB_RESET_USBINTTEST (1 << 4)
-#define USB_RESET_SLEEPSTBYEN (1 << 5)
-#define USB_RESET_PWRSENSELOW (1 << 6)
-#define USB_RESET_PWRCTRLLOW (1 << 7)
-
-#define USB_STATUS_IRQHCIRMTWKUP (1 << 7)
-#define USB_STATUS_IRQHCIBUFFACC (1 << 8)
-#define USB_STATUS_NIRQHCIM (1 << 9)
-#define USB_STATUS_NHCIMFCLR (1 << 10)
-#define USB_STATUS_USBPWRSENSE (1 << 11)
-
-/*
* Serial Audio Controller
*
* Registers
@@ -327,22 +303,6 @@
* PC_SSR GPIO Block C Sleep State
*/
-#define _PA_DDR _SA1111( 0x1000 )
-#define _PA_DRR _SA1111( 0x1004 )
-#define _PA_DWR _SA1111( 0x1004 )
-#define _PA_SDR _SA1111( 0x1008 )
-#define _PA_SSR _SA1111( 0x100c )
-#define _PB_DDR _SA1111( 0x1010 )
-#define _PB_DRR _SA1111( 0x1014 )
-#define _PB_DWR _SA1111( 0x1014 )
-#define _PB_SDR _SA1111( 0x1018 )
-#define _PB_SSR _SA1111( 0x101c )
-#define _PC_DDR _SA1111( 0x1020 )
-#define _PC_DRR _SA1111( 0x1024 )
-#define _PC_DWR _SA1111( 0x1024 )
-#define _PC_SDR _SA1111( 0x1028 )
-#define _PC_SSR _SA1111( 0x102c )
-
#define SA1111_GPIO 0x1000
#define SA1111_GPIO_PADDR (0x000)
@@ -425,106 +385,30 @@
#define SA1111_WAKEPOL0 0x0034
#define SA1111_WAKEPOL1 0x0038
-/*
- * PS/2 Trackpad and Mouse Interfaces
- *
- * Registers
- * PS2CR Control Register
- * PS2STAT Status Register
- * PS2DATA Transmit/Receive Data register
- * PS2CLKDIV Clock Division Register
- * PS2PRECNT Clock Precount Register
- * PS2TEST1 Test register 1
- * PS2TEST2 Test register 2
- * PS2TEST3 Test register 3
- * PS2TEST4 Test register 4
- */
-
+/* PS/2 Trackpad and Mouse Interfaces */
#define SA1111_KBD 0x0a00
#define SA1111_MSE 0x0c00
-/*
- * These are offsets from the above bases.
- */
-#define SA1111_PS2CR 0x0000
-#define SA1111_PS2STAT 0x0004
-#define SA1111_PS2DATA 0x0008
-#define SA1111_PS2CLKDIV 0x000c
-#define SA1111_PS2PRECNT 0x0010
-
-#define PS2CR_ENA 0x08
-#define PS2CR_FKD 0x02
-#define PS2CR_FKC 0x01
-
-#define PS2STAT_STP 0x0100
-#define PS2STAT_TXE 0x0080
-#define PS2STAT_TXB 0x0040
-#define PS2STAT_RXF 0x0020
-#define PS2STAT_RXB 0x0010
-#define PS2STAT_ENA 0x0008
-#define PS2STAT_RXP 0x0004
-#define PS2STAT_KBD 0x0002
-#define PS2STAT_KBC 0x0001
+/* PCMCIA Interface */
+#define SA1111_PCMCIA 0x1600
-/*
- * PCMCIA Interface
- *
- * Registers
- * PCSR Status Register
- * PCCR Control Register
- * PCSSR Sleep State Register
- */
-
-#define SA1111_PCMCIA 0x1600
-
-/*
- * These are offsets from the above base.
- */
-#define SA1111_PCCR 0x0000
-#define SA1111_PCSSR 0x0004
-#define SA1111_PCSR 0x0008
-
-#define PCSR_S0_READY (1<<0)
-#define PCSR_S1_READY (1<<1)
-#define PCSR_S0_DETECT (1<<2)
-#define PCSR_S1_DETECT (1<<3)
-#define PCSR_S0_VS1 (1<<4)
-#define PCSR_S0_VS2 (1<<5)
-#define PCSR_S1_VS1 (1<<6)
-#define PCSR_S1_VS2 (1<<7)
-#define PCSR_S0_WP (1<<8)
-#define PCSR_S1_WP (1<<9)
-#define PCSR_S0_BVD1 (1<<10)
-#define PCSR_S0_BVD2 (1<<11)
-#define PCSR_S1_BVD1 (1<<12)
-#define PCSR_S1_BVD2 (1<<13)
-
-#define PCCR_S0_RST (1<<0)
-#define PCCR_S1_RST (1<<1)
-#define PCCR_S0_FLT (1<<2)
-#define PCCR_S1_FLT (1<<3)
-#define PCCR_S0_PWAITEN (1<<4)
-#define PCCR_S1_PWAITEN (1<<5)
-#define PCCR_S0_PSE (1<<6)
-#define PCCR_S1_PSE (1<<7)
-
-#define PCSSR_S0_SLEEP (1<<0)
-#define PCSSR_S1_SLEEP (1<<1)
extern struct bus_type sa1111_bus_type;
-#define SA1111_DEVID_SBI 0
-#define SA1111_DEVID_SK 1
-#define SA1111_DEVID_USB 2
-#define SA1111_DEVID_SAC 3
-#define SA1111_DEVID_SSP 4
-#define SA1111_DEVID_PS2 5
-#define SA1111_DEVID_GPIO 6
-#define SA1111_DEVID_INT 7
-#define SA1111_DEVID_PCMCIA 8
+#define SA1111_DEVID_SBI (1 << 0)
+#define SA1111_DEVID_SK (1 << 1)
+#define SA1111_DEVID_USB (1 << 2)
+#define SA1111_DEVID_SAC (1 << 3)
+#define SA1111_DEVID_SSP (1 << 4)
+#define SA1111_DEVID_PS2 (3 << 5)
+#define SA1111_DEVID_PS2_KBD (1 << 5)
+#define SA1111_DEVID_PS2_MSE (1 << 6)
+#define SA1111_DEVID_GPIO (1 << 7)
+#define SA1111_DEVID_INT (1 << 8)
+#define SA1111_DEVID_PCMCIA (1 << 9)
struct sa1111_dev {
struct device dev;
@@ -548,6 +432,7 @@ struct sa1111_driver {
int (*remove)(struct sa1111_dev *);
int (*suspend)(struct sa1111_dev *, pm_message_t);
int (*resume)(struct sa1111_dev *);
+ void (*shutdown)(struct sa1111_dev *);
};
#define SA1111_DRV(_d) container_of((_d), struct sa1111_driver, drv)
@@ -555,9 +440,10 @@ struct sa1111_driver {
#define SA1111_DRIVER_NAME(_sadev) ((_sadev)->dev.driver->name)
/*
- * These frob the SKPCR register.
+ * These frob the SKPCR register, and call platform specific
+ * enable/disable functions.
*/
-void sa1111_enable_device(struct sa1111_dev *);
+int sa1111_enable_device(struct sa1111_dev *);
void sa1111_disable_device(struct sa1111_dev *);
unsigned int sa1111_pll_clock(struct sa1111_dev *);
@@ -580,6 +466,10 @@ void sa1111_set_sleep_io(struct sa1111_dev *sadev, unsigned int bits, unsigned i
struct sa1111_platform_data {
int irq_base; /* base for cascaded on-chip IRQs */
+ unsigned disable_devs;
+ void *data;
+ int (*enable)(void *, unsigned);
+ void (*disable)(void *, unsigned);
};
#endif /* _ASM_ARCH_SA1111 */
diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile
index f16d7652f34..3a274878412 100644
--- a/arch/arm/kernel/Makefile
+++ b/arch/arm/kernel/Makefile
@@ -23,7 +23,6 @@ obj-$(CONFIG_LEDS) += leds.o
obj-$(CONFIG_OC_ETM) += etm.o
obj-$(CONFIG_ISA_DMA_API) += dma.o
-obj-$(CONFIG_ARCH_ACORN) += ecard.o
obj-$(CONFIG_FIQ) += fiq.o fiqasm.o
obj-$(CONFIG_MODULES) += armksyms.o module.o
obj-$(CONFIG_ARTHUR) += arthur.o
diff --git a/arch/arm/mach-ebsa110/core.c b/arch/arm/mach-ebsa110/core.c
index 804c9122b7b..e400d75d11a 100644
--- a/arch/arm/mach-ebsa110/core.c
+++ b/arch/arm/mach-ebsa110/core.c
@@ -30,10 +30,7 @@
#include <asm/mach/time.h>
-#define IRQ_MASK 0xfe000000 /* read */
-#define IRQ_MSET 0xfe000000 /* write */
-#define IRQ_STAT 0xff000000 /* read */
-#define IRQ_MCLR 0xff000000 /* write */
+#include "core.h"
static void ebsa110_mask_irq(struct irq_data *d)
{
@@ -79,22 +76,22 @@ static struct map_desc ebsa110_io_desc[] __initdata = {
{ /* IRQ_STAT/IRQ_MCLR */
.virtual = IRQ_STAT,
.pfn = __phys_to_pfn(TRICK4_PHYS),
- .length = PGDIR_SIZE,
+ .length = TRICK4_SIZE,
.type = MT_DEVICE
}, { /* IRQ_MASK/IRQ_MSET */
.virtual = IRQ_MASK,
.pfn = __phys_to_pfn(TRICK3_PHYS),
- .length = PGDIR_SIZE,
+ .length = TRICK3_SIZE,
.type = MT_DEVICE
}, { /* SOFT_BASE */
.virtual = SOFT_BASE,
.pfn = __phys_to_pfn(TRICK1_PHYS),
- .length = PGDIR_SIZE,
+ .length = TRICK1_SIZE,
.type = MT_DEVICE
}, { /* PIT_BASE */
.virtual = PIT_BASE,
.pfn = __phys_to_pfn(TRICK0_PHYS),
- .length = PGDIR_SIZE,
+ .length = TRICK0_SIZE,
.type = MT_DEVICE
},
diff --git a/arch/arm/mach-ebsa110/core.h b/arch/arm/mach-ebsa110/core.h
new file mode 100644
index 00000000000..c93c9e43012
--- /dev/null
+++ b/arch/arm/mach-ebsa110/core.h
@@ -0,0 +1,41 @@
+/*
+ * Copyright (C) 1996-2000 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This file contains the core hardware definitions of the EBSA-110.
+ */
+#ifndef CORE_H
+#define CORE_H
+
+/* Physical addresses/sizes */
+#define ISAMEM_PHYS 0xe0000000
+#define ISAMEM_SIZE 0x10000000
+
+#define ISAIO_PHYS 0xf0000000
+#define ISAIO_SIZE PGDIR_SIZE
+
+#define TRICK0_PHYS 0xf2000000
+#define TRICK0_SIZE PGDIR_SIZE
+#define TRICK1_PHYS 0xf2400000
+#define TRICK1_SIZE PGDIR_SIZE
+#define TRICK2_PHYS 0xf2800000
+#define TRICK3_PHYS 0xf2c00000
+#define TRICK3_SIZE PGDIR_SIZE
+#define TRICK4_PHYS 0xf3000000
+#define TRICK4_SIZE PGDIR_SIZE
+#define TRICK5_PHYS 0xf3400000
+#define TRICK6_PHYS 0xf3800000
+#define TRICK7_PHYS 0xf3c00000
+
+/* Virtual addresses */
+#define PIT_BASE 0xfc000000 /* trick 0 */
+#define SOFT_BASE 0xfd000000 /* trick 1 */
+#define IRQ_MASK 0xfe000000 /* trick 3 - read */
+#define IRQ_MSET 0xfe000000 /* trick 3 - write */
+#define IRQ_STAT 0xff000000 /* trick 4 - read */
+#define IRQ_MCLR 0xff000000 /* trick 4 - write */
+
+#endif
diff --git a/arch/arm/mach-ebsa110/include/mach/hardware.h b/arch/arm/mach-ebsa110/include/mach/hardware.h
index 4b2fb774390..f4e5407bd00 100644
--- a/arch/arm/mach-ebsa110/include/mach/hardware.h
+++ b/arch/arm/mach-ebsa110/include/mach/hardware.h
@@ -12,48 +12,9 @@
#ifndef __ASM_ARCH_HARDWARE_H
#define __ASM_ARCH_HARDWARE_H
-/*
- * The EBSA110 has a weird "ISA IO" region:
- *
- * Region 0 (addr = 0xf0000000 + io << 2)
- * --------------------------------------------------------
- * Physical region IO region
- * f0000fe0 - f0000ffc 3f8 - 3ff ttyS0
- * f0000e60 - f0000e64 398 - 399
- * f0000de0 - f0000dfc 378 - 37f lp0
- * f0000be0 - f0000bfc 2f8 - 2ff ttyS1
- *
- * Region 1 (addr = 0xf0000000 + (io & ~1) << 1 + (io & 1))
- * --------------------------------------------------------
- * Physical region IO region
- * f00014f1 a79 pnp write data
- * f00007c0 - f00007c1 3e0 - 3e1 pcmcia
- * f00004f1 279 pnp address
- * f0000440 - f000046c 220 - 236 eth0
- * f0000405 203 pnp read data
- */
-
-#define ISAMEM_PHYS 0xe0000000
-#define ISAMEM_SIZE 0x10000000
-
-#define ISAIO_PHYS 0xf0000000
-#define ISAIO_SIZE PGDIR_SIZE
-
-#define TRICK0_PHYS 0xf2000000
-#define TRICK1_PHYS 0xf2400000
-#define TRICK2_PHYS 0xf2800000
-#define TRICK3_PHYS 0xf2c00000
-#define TRICK4_PHYS 0xf3000000
-#define TRICK5_PHYS 0xf3400000
-#define TRICK6_PHYS 0xf3800000
-#define TRICK7_PHYS 0xf3c00000
-
#define ISAMEM_BASE 0xe0000000
#define ISAIO_BASE 0xf0000000
-#define PIT_BASE 0xfc000000
-#define SOFT_BASE 0xfd000000
-
/*
* RAM definitions
*/
diff --git a/arch/arm/mach-ebsa110/io.c b/arch/arm/mach-ebsa110/io.c
index c52e3047a7e..756cc377a73 100644
--- a/arch/arm/mach-ebsa110/io.c
+++ b/arch/arm/mach-ebsa110/io.c
@@ -177,6 +177,26 @@ void writesl(void __iomem *addr, const void *data, int len)
}
EXPORT_SYMBOL(writesl);
+/*
+ * The EBSA110 has a weird "ISA IO" region:
+ *
+ * Region 0 (addr = 0xf0000000 + io << 2)
+ * --------------------------------------------------------
+ * Physical region IO region
+ * f0000fe0 - f0000ffc 3f8 - 3ff ttyS0
+ * f0000e60 - f0000e64 398 - 399
+ * f0000de0 - f0000dfc 378 - 37f lp0
+ * f0000be0 - f0000bfc 2f8 - 2ff ttyS1
+ *
+ * Region 1 (addr = 0xf0000000 + (io & ~1) << 1 + (io & 1))
+ * --------------------------------------------------------
+ * Physical region IO region
+ * f00014f1 a79 pnp write data
+ * f00007c0 - f00007c1 3e0 - 3e1 pcmcia
+ * f00004f1 279 pnp address
+ * f0000440 - f000046c 220 - 236 eth0
+ * f0000405 203 pnp read data
+ */
#define SUPERIO_PORT(p) \
(((p) >> 3) == (0x3f8 >> 3) || \
((p) >> 3) == (0x2f8 >> 3) || \
diff --git a/arch/arm/mach-ebsa110/leds.c b/arch/arm/mach-ebsa110/leds.c
index 6a6ea57c2a4..d43121a30aa 100644
--- a/arch/arm/mach-ebsa110/leds.c
+++ b/arch/arm/mach-ebsa110/leds.c
@@ -20,6 +20,8 @@
#include <asm/system.h>
#include <asm/mach-types.h>
+#include "core.h"
+
static spinlock_t leds_lock;
static void ebsa110_leds_event(led_event_t ledevt)
diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c
index 6ebd276aebe..6bb3f47b1f1 100644
--- a/arch/arm/mach-pxa/lubbock.c
+++ b/arch/arm/mach-pxa/lubbock.c
@@ -223,6 +223,7 @@ static struct resource sa1111_resources[] = {
static struct sa1111_platform_data sa1111_info = {
.irq_base = LUBBOCK_SA1111_IRQ_BASE,
+ .disable_devs = SA1111_DEVID_SAC,
};
static struct platform_device sa1111_device = {
diff --git a/arch/arm/mach-rpc/Makefile b/arch/arm/mach-rpc/Makefile
index dfa405c0cfd..992e28b4ae9 100644
--- a/arch/arm/mach-rpc/Makefile
+++ b/arch/arm/mach-rpc/Makefile
@@ -4,7 +4,7 @@
# Object file lists.
-obj-y := dma.o fiq.o irq.o riscpc.o
+obj-y := dma.o ecard.o fiq.o irq.o riscpc.o time.o
obj-m :=
obj-n :=
obj- :=
diff --git a/arch/arm/kernel/ecard.c b/arch/arm/mach-rpc/ecard.c
index 1651d495074..b91bc87b3dc 100644
--- a/arch/arm/kernel/ecard.c
+++ b/arch/arm/mach-rpc/ecard.c
@@ -42,6 +42,7 @@
#include <linux/init.h>
#include <linux/mutex.h>
#include <linux/kthread.h>
+#include <linux/irq.h>
#include <linux/io.h>
#include <asm/dma.h>
@@ -54,10 +55,6 @@
#include "ecard.h"
-#ifndef CONFIG_ARCH_RPC
-#define HAVE_EXPMASK
-#endif
-
struct ecard_request {
void (*fn)(struct ecard_request *);
ecard_t *ec;
@@ -77,9 +74,6 @@ struct expcard_blacklist {
static ecard_t *cards;
static ecard_t *slot_to_expcard[MAX_ECARDS];
static unsigned int ectcr;
-#ifdef HAS_EXPMASK
-static unsigned int have_expmask;
-#endif
/* List of descriptions of cards which don't have an extended
* identification, or chunk directories containing a description.
@@ -391,22 +385,10 @@ int ecard_readchunk(struct in_chunk_dir *cd, ecard_t *ec, int id, int num)
static void ecard_def_irq_enable(ecard_t *ec, int irqnr)
{
-#ifdef HAS_EXPMASK
- if (irqnr < 4 && have_expmask) {
- have_expmask |= 1 << irqnr;
- __raw_writeb(have_expmask, EXPMASK_ENABLE);
- }
-#endif
}
static void ecard_def_irq_disable(ecard_t *ec, int irqnr)
{
-#ifdef HAS_EXPMASK
- if (irqnr < 4 && have_expmask) {
- have_expmask &= ~(1 << irqnr);
- __raw_writeb(have_expmask, EXPMASK_ENABLE);
- }
-#endif
}
static int ecard_def_irq_pending(ecard_t *ec)
@@ -446,7 +428,7 @@ static expansioncard_ops_t ecard_default_ops = {
*/
static void ecard_irq_unmask(struct irq_data *d)
{
- ecard_t *ec = slot_to_ecard(d->irq - 32);
+ ecard_t *ec = irq_data_get_irq_chip_data(d);
if (ec) {
if (!ec->ops)
@@ -462,7 +444,7 @@ static void ecard_irq_unmask(struct irq_data *d)
static void ecard_irq_mask(struct irq_data *d)
{
- ecard_t *ec = slot_to_ecard(d->irq - 32);
+ ecard_t *ec = irq_data_get_irq_chip_data(d);
if (ec) {
if (!ec->ops)
@@ -579,7 +561,7 @@ ecard_irq_handler(unsigned int irq, struct irq_desc *desc)
for (ec = cards; ec; ec = ec->next) {
int pending;
- if (!ec->claimed || ec->irq == NO_IRQ || ec->slot_no == 8)
+ if (!ec->claimed || !ec->irq || ec->slot_no == 8)
continue;
if (ec->ops && ec->ops->irqpending)
@@ -598,83 +580,6 @@ ecard_irq_handler(unsigned int irq, struct irq_desc *desc)
ecard_check_lockup(desc);
}
-#ifdef HAS_EXPMASK
-static unsigned char priority_masks[] =
-{
- 0xf0, 0xf1, 0xf3, 0xf7, 0xff, 0xff, 0xff, 0xff
-};
-
-static unsigned char first_set[] =
-{
- 0x00, 0x00, 0x01, 0x00, 0x02, 0x00, 0x01, 0x00,
- 0x03, 0x00, 0x01, 0x00, 0x02, 0x00, 0x01, 0x00
-};
-
-static void
-ecard_irqexp_handler(unsigned int irq, struct irq_desc *desc)
-{
- const unsigned int statusmask = 15;
- unsigned int status;
-
- status = __raw_readb(EXPMASK_STATUS) & statusmask;
- if (status) {
- unsigned int slot = first_set[status];
- ecard_t *ec = slot_to_ecard(slot);
-
- if (ec->claimed) {
- /*
- * this ugly code is so that we can operate a
- * prioritorising system:
- *
- * Card 0 highest priority
- * Card 1
- * Card 2
- * Card 3 lowest priority
- *
- * Serial cards should go in 0/1, ethernet/scsi in 2/3
- * otherwise you will lose serial data at high speeds!
- */
- generic_handle_irq(ec->irq);
- } else {
- printk(KERN_WARNING "card%d: interrupt from unclaimed "
- "card???\n", slot);
- have_expmask &= ~(1 << slot);
- __raw_writeb(have_expmask, EXPMASK_ENABLE);
- }
- } else
- printk(KERN_WARNING "Wild interrupt from backplane (masks)\n");
-}
-
-static int __init ecard_probeirqhw(void)
-{
- ecard_t *ec;
- int found;
-
- __raw_writeb(0x00, EXPMASK_ENABLE);
- __raw_writeb(0xff, EXPMASK_STATUS);
- found = (__raw_readb(EXPMASK_STATUS) & 15) == 0;
- __raw_writeb(0xff, EXPMASK_ENABLE);
-
- if (found) {
- printk(KERN_DEBUG "Expansion card interrupt "
- "management hardware found\n");
-
- /* for each card present, set a bit to '1' */
- have_expmask = 0x80000000;
-
- for (ec = cards; ec; ec = ec->next)
- have_expmask |= 1 << ec->slot_no;
-
- __raw_writeb(have_expmask, EXPMASK_ENABLE);
- }
-
- return found;
-}
-#else
-#define ecard_irqexp_handler NULL
-#define ecard_probeirqhw() (0)
-#endif
-
static void __iomem *__ecard_address(ecard_t *ec, card_type_t type, card_speed_t speed)
{
void __iomem *address = NULL;
@@ -806,8 +711,8 @@ static struct expansion_card *__init ecard_alloc_card(int type, int slot)
ec->slot_no = slot;
ec->easi = type == ECARD_EASI;
- ec->irq = NO_IRQ;
- ec->fiq = NO_IRQ;
+ ec->irq = 0;
+ ec->fiq = 0;
ec->dma = NO_DMA;
ec->ops = &ecard_default_ops;
@@ -978,8 +883,7 @@ EXPORT_SYMBOL(ecardm_iomap);
* If bit 1 of the first byte of the card is set, then the
* card does not exist.
*/
-static int __init
-ecard_probe(int slot, card_type_t type)
+static int __init ecard_probe(int slot, unsigned irq, card_type_t type)
{
ecard_t **ecp;
ecard_t *ec;
@@ -1033,18 +937,18 @@ ecard_probe(int slot, card_type_t type)
break;
}
+ ec->irq = irq;
+
/*
* hook the interrupt handlers
*/
if (slot < 8) {
- ec->irq = 32 + slot;
irq_set_chip_and_handler(ec->irq, &ecard_chip,
handle_level_irq);
+ irq_set_chip_data(ec->irq, ec);
set_irq_flags(ec->irq, IRQF_VALID);
}
- if (slot == 8)
- ec->irq = 11;
#ifdef CONFIG_ARCH_RPC
/* On RiscPC, only first two slots have DMA capability */
if (slot < 2)
@@ -1074,28 +978,30 @@ ecard_probe(int slot, card_type_t type)
static int __init ecard_init(void)
{
struct task_struct *task;
- int slot, irqhw;
+ int slot, irqbase;
+
+ irqbase = irq_alloc_descs(-1, 0, 8, -1);
+ if (irqbase < 0)
+ return irqbase;
task = kthread_run(ecard_task, NULL, "kecardd");
if (IS_ERR(task)) {
printk(KERN_ERR "Ecard: unable to create kernel thread: %ld\n",
PTR_ERR(task));
+ irq_free_descs(irqbase, 8);
return PTR_ERR(task);
}
printk("Probing expansion cards\n");
for (slot = 0; slot < 8; slot ++) {
- if (ecard_probe(slot, ECARD_EASI) == -ENODEV)
- ecard_probe(slot, ECARD_IOC);
+ if (ecard_probe(slot, irqbase + slot, ECARD_EASI) == -ENODEV)
+ ecard_probe(slot, irqbase + slot, ECARD_IOC);
}
- ecard_probe(8, ECARD_IOC);
-
- irqhw = ecard_probeirqhw();
+ ecard_probe(8, 11, ECARD_IOC);
- irq_set_chained_handler(IRQ_EXPANSIONCARD,
- irqhw ? ecard_irqexp_handler : ecard_irq_handler);
+ irq_set_chained_handler(IRQ_EXPANSIONCARD, ecard_irq_handler);
ecard_proc_init();
diff --git a/arch/arm/kernel/ecard.h b/arch/arm/mach-rpc/ecard.h
index 4642d436be2..4642d436be2 100644
--- a/arch/arm/kernel/ecard.h
+++ b/arch/arm/mach-rpc/ecard.h
diff --git a/arch/arm/mach-rpc/include/mach/irqs.h b/arch/arm/mach-rpc/include/mach/irqs.h
index 3d2037496e3..6868e178274 100644
--- a/arch/arm/mach-rpc/include/mach/irqs.h
+++ b/arch/arm/mach-rpc/include/mach/irqs.h
@@ -42,6 +42,4 @@
*/
#define FIQ_START 64
-#define IRQ_TIMER IRQ_TIMER0
-
#define NR_IRQS 128
diff --git a/arch/arm/mach-rpc/riscpc.c b/arch/arm/mach-rpc/riscpc.c
index 3d44a59fc0d..731552d68ad 100644
--- a/arch/arm/mach-rpc/riscpc.c
+++ b/arch/arm/mach-rpc/riscpc.c
@@ -98,15 +98,9 @@ static void __init rpc_map_io(void)
}
static struct resource acornfb_resources[] = {
- { /* VIDC */
- .start = 0x03400000,
- .end = 0x035fffff,
- .flags = IORESOURCE_MEM,
- }, {
- .start = IRQ_VSYNCPULSE,
- .end = IRQ_VSYNCPULSE,
- .flags = IORESOURCE_IRQ,
- },
+ /* VIDC */
+ DEFINE_RES_MEM(0x03400000, 0x00200000),
+ DEFINE_RES_IRQ(IRQ_VSYNCPULSE),
};
static struct platform_device acornfb_device = {
@@ -120,11 +114,7 @@ static struct platform_device acornfb_device = {
};
static struct resource iomd_resources[] = {
- {
- .start = 0x03200000,
- .end = 0x0320ffff,
- .flags = IORESOURCE_MEM,
- },
+ DEFINE_RES_MEM(0x03200000, 0x10000),
};
static struct platform_device iomd_device = {
@@ -134,18 +124,25 @@ static struct platform_device iomd_device = {
.resource = iomd_resources,
};
+static struct resource iomd_kart_resources[] = {
+ DEFINE_RES_IRQ(IRQ_KEYBOARDRX),
+ DEFINE_RES_IRQ(IRQ_KEYBOARDTX),
+};
+
static struct platform_device kbd_device = {
.name = "kart",
.id = -1,
.dev = {
.parent = &iomd_device.dev,
},
+ .num_resources = ARRAY_SIZE(iomd_kart_resources),
+ .resource = iomd_kart_resources,
};
static struct plat_serial8250_port serial_platform_data[] = {
{
.mapbase = 0x03010fe0,
- .irq = 10,
+ .irq = IRQ_SERIALPORT,
.uartclk = 1843200,
.regshift = 2,
.iotype = UPIO_MEM,
@@ -167,21 +164,9 @@ static struct pata_platform_info pata_platform_data = {
};
static struct resource pata_resources[] = {
- [0] = {
- .start = 0x030107c0,
- .end = 0x030107df,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = 0x03010fd8,
- .end = 0x03010fdb,
- .flags = IORESOURCE_MEM,
- },
- [2] = {
- .start = IRQ_HARDDISK,
- .end = IRQ_HARDDISK,
- .flags = IORESOURCE_IRQ,
- },
+ DEFINE_RES_MEM(0x030107c0, 0x20),
+ DEFINE_RES_MEM(0x03010fd8, 0x04),
+ DEFINE_RES_IRQ(IRQ_HARDDISK),
};
static struct platform_device pata_device = {
diff --git a/arch/arm/common/time-acorn.c b/arch/arm/mach-rpc/time.c
index deeed561b16..581fca934bb 100644
--- a/arch/arm/common/time-acorn.c
+++ b/arch/arm/mach-rpc/time.c
@@ -85,7 +85,7 @@ static struct irqaction ioc_timer_irq = {
static void __init ioc_timer_init(void)
{
ioctime_init();
- setup_irq(IRQ_TIMER, &ioc_timer_irq);
+ setup_irq(IRQ_TIMER0, &ioc_timer_irq);
}
struct sys_timer ioc_timer = {
diff --git a/arch/arm/mach-sa1100/Makefile b/arch/arm/mach-sa1100/Makefile
index ed7408d3216..60b97ec0167 100644
--- a/arch/arm/mach-sa1100/Makefile
+++ b/arch/arm/mach-sa1100/Makefile
@@ -3,7 +3,7 @@
#
# Common support
-obj-y := clock.o generic.o irq.o dma.o time.o #nmi-oopser.o
+obj-y := clock.o generic.o irq.o time.o #nmi-oopser.o
obj-m :=
obj-n :=
obj- :=
diff --git a/arch/arm/mach-sa1100/assabet.c b/arch/arm/mach-sa1100/assabet.c
index 0c4b76ab4d8..375d3f779a8 100644
--- a/arch/arm/mach-sa1100/assabet.c
+++ b/arch/arm/mach-sa1100/assabet.c
@@ -15,14 +15,16 @@
#include <linux/errno.h>
#include <linux/ioport.h>
#include <linux/serial_core.h>
+#include <linux/mfd/ucb1x00.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/delay.h>
#include <linux/mm.h>
+#include <video/sa1100fb.h>
+
#include <mach/hardware.h>
#include <asm/mach-types.h>
-#include <asm/irq.h>
#include <asm/setup.h>
#include <asm/page.h>
#include <asm/pgtable-hwdef.h>
@@ -36,17 +38,18 @@
#include <asm/mach/serial_sa1100.h>
#include <mach/assabet.h>
#include <mach/mcp.h>
+#include <mach/irqs.h>
#include "generic.h"
#define ASSABET_BCR_DB1110 \
- (ASSABET_BCR_SPK_OFF | ASSABET_BCR_QMUTE | \
+ (ASSABET_BCR_SPK_OFF | \
ASSABET_BCR_LED_GREEN | ASSABET_BCR_LED_RED | \
ASSABET_BCR_RS232EN | ASSABET_BCR_LCD_12RGB | \
ASSABET_BCR_IRDA_MD0)
#define ASSABET_BCR_DB1111 \
- (ASSABET_BCR_SPK_OFF | ASSABET_BCR_QMUTE | \
+ (ASSABET_BCR_SPK_OFF | \
ASSABET_BCR_LED_GREEN | ASSABET_BCR_LED_RED | \
ASSABET_BCR_RS232EN | ASSABET_BCR_LCD_12RGB | \
ASSABET_BCR_CF_BUS_OFF | ASSABET_BCR_STEREO_LB | \
@@ -69,31 +72,10 @@ void ASSABET_BCR_frob(unsigned int mask, unsigned int val)
EXPORT_SYMBOL(ASSABET_BCR_frob);
-static void assabet_backlight_power(int on)
-{
-#ifndef ASSABET_PAL_VIDEO
- if (on)
- ASSABET_BCR_set(ASSABET_BCR_LIGHT_ON);
- else
-#endif
- ASSABET_BCR_clear(ASSABET_BCR_LIGHT_ON);
-}
-
-/*
- * Turn on/off the backlight. When turning the backlight on,
- * we wait 500us after turning it on so we don't cause the
- * supplies to droop when we enable the LCD controller (and
- * cause a hard reset.)
- */
-static void assabet_lcd_power(int on)
+static void assabet_ucb1x00_reset(enum ucb1x00_reset state)
{
-#ifndef ASSABET_PAL_VIDEO
- if (on) {
- ASSABET_BCR_set(ASSABET_BCR_LCD_ON);
- udelay(500);
- } else
-#endif
- ASSABET_BCR_clear(ASSABET_BCR_LCD_ON);
+ if (state == UCB_RST_PROBE)
+ ASSABET_BCR_set(ASSABET_BCR_CODEC_RST);
}
@@ -152,15 +134,8 @@ static struct flash_platform_data assabet_flash_data = {
};
static struct resource assabet_flash_resources[] = {
- {
- .start = SA1100_CS0_PHYS,
- .end = SA1100_CS0_PHYS + SZ_32M - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .start = SA1100_CS1_PHYS,
- .end = SA1100_CS1_PHYS + SZ_32M - 1,
- .flags = IORESOURCE_MEM,
- }
+ DEFINE_RES_MEM(SA1100_CS0_PHYS, SZ_32M),
+ DEFINE_RES_MEM(SA1100_CS1_PHYS, SZ_32M),
};
@@ -199,18 +174,126 @@ static struct irda_platform_data assabet_irda_data = {
.set_speed = assabet_irda_set_speed,
};
+static struct ucb1x00_plat_data assabet_ucb1x00_data = {
+ .reset = assabet_ucb1x00_reset,
+ .gpio_base = -1,
+};
+
static struct mcp_plat_data assabet_mcp_data = {
.mccr0 = MCCR0_ADM,
.sclk_rate = 11981000,
+ .codec_pdata = &assabet_ucb1x00_data,
+};
+
+static void assabet_lcd_set_visual(u32 visual)
+{
+ u_int is_true_color = visual == FB_VISUAL_TRUECOLOR;
+
+ if (machine_is_assabet()) {
+#if 1 // phase 4 or newer Assabet's
+ if (is_true_color)
+ ASSABET_BCR_set(ASSABET_BCR_LCD_12RGB);
+ else
+ ASSABET_BCR_clear(ASSABET_BCR_LCD_12RGB);
+#else
+ // older Assabet's
+ if (is_true_color)
+ ASSABET_BCR_clear(ASSABET_BCR_LCD_12RGB);
+ else
+ ASSABET_BCR_set(ASSABET_BCR_LCD_12RGB);
+#endif
+ }
+}
+
+#ifndef ASSABET_PAL_VIDEO
+static void assabet_lcd_backlight_power(int on)
+{
+ if (on)
+ ASSABET_BCR_set(ASSABET_BCR_LIGHT_ON);
+ else
+ ASSABET_BCR_clear(ASSABET_BCR_LIGHT_ON);
+}
+
+/*
+ * Turn on/off the backlight. When turning the backlight on, we wait
+ * 500us after turning it on so we don't cause the supplies to droop
+ * when we enable the LCD controller (and cause a hard reset.)
+ */
+static void assabet_lcd_power(int on)
+{
+ if (on) {
+ ASSABET_BCR_set(ASSABET_BCR_LCD_ON);
+ udelay(500);
+ } else
+ ASSABET_BCR_clear(ASSABET_BCR_LCD_ON);
+}
+
+/*
+ * The assabet uses a sharp LQ039Q2DS54 LCD module. It is actually
+ * takes an RGB666 signal, but we provide it with an RGB565 signal
+ * instead (def_rgb_16).
+ */
+static struct sa1100fb_mach_info lq039q2ds54_info = {
+ .pixclock = 171521, .bpp = 16,
+ .xres = 320, .yres = 240,
+
+ .hsync_len = 5, .vsync_len = 1,
+ .left_margin = 61, .upper_margin = 3,
+ .right_margin = 9, .lower_margin = 0,
+
+ .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+
+ .lccr0 = LCCR0_Color | LCCR0_Sngl | LCCR0_Act,
+ .lccr3 = LCCR3_OutEnH | LCCR3_PixRsEdg | LCCR3_ACBsDiv(2),
+
+ .backlight_power = assabet_lcd_backlight_power,
+ .lcd_power = assabet_lcd_power,
+ .set_visual = assabet_lcd_set_visual,
+};
+#else
+static void assabet_pal_backlight_power(int on)
+{
+ ASSABET_BCR_clear(ASSABET_BCR_LIGHT_ON);
+}
+
+static void assabet_pal_power(int on)
+{
+ ASSABET_BCR_clear(ASSABET_BCR_LCD_ON);
+}
+
+static struct sa1100fb_mach_info pal_info = {
+ .pixclock = 67797, .bpp = 16,
+ .xres = 640, .yres = 512,
+
+ .hsync_len = 64, .vsync_len = 6,
+ .left_margin = 125, .upper_margin = 70,
+ .right_margin = 115, .lower_margin = 36,
+
+ .lccr0 = LCCR0_Color | LCCR0_Sngl | LCCR0_Act,
+ .lccr3 = LCCR3_OutEnH | LCCR3_PixRsEdg | LCCR3_ACBsDiv(512),
+
+ .backlight_power = assabet_pal_backlight_power,
+ .lcd_power = assabet_pal_power,
+ .set_visual = assabet_lcd_set_visual,
};
+#endif
+
+#ifdef CONFIG_ASSABET_NEPONSET
+static struct resource neponset_resources[] = {
+ DEFINE_RES_MEM(0x10000000, 0x08000000),
+ DEFINE_RES_MEM(0x18000000, 0x04000000),
+ DEFINE_RES_MEM(0x40000000, SZ_8K),
+ DEFINE_RES_IRQ(IRQ_GPIO25),
+};
+#endif
static void __init assabet_init(void)
{
/*
* Ensure that the power supply is in "high power" mode.
*/
- GPDR |= GPIO_GPIO16;
GPSR = GPIO_GPIO16;
+ GPDR |= GPIO_GPIO16;
/*
* Ensure that these pins are set as outputs and are driving
@@ -218,8 +301,16 @@ static void __init assabet_init(void)
* the WS latch in the CPLD, and we don't float causing
* excessive power drain. --rmk
*/
- GPDR |= GPIO_SSP_TXD | GPIO_SSP_SCLK | GPIO_SSP_SFRM;
GPCR = GPIO_SSP_TXD | GPIO_SSP_SCLK | GPIO_SSP_SFRM;
+ GPDR |= GPIO_SSP_TXD | GPIO_SSP_SCLK | GPIO_SSP_SFRM;
+
+ /*
+ * Also set GPIO27 as an output; this is used to clock UART3
+ * via the FPGA and as otherwise has no pullups or pulldowns,
+ * so stop it floating.
+ */
+ GPCR = GPIO_GPIO27;
+ GPDR |= GPIO_GPIO27;
/*
* Set up registers for sleep mode.
@@ -231,8 +322,7 @@ static void __init assabet_init(void)
PPDR |= PPC_TXD3 | PPC_TXD1;
PPSR |= PPC_TXD3 | PPC_TXD1;
- sa1100fb_lcd_power = assabet_lcd_power;
- sa1100fb_backlight_power = assabet_backlight_power;
+ sa11x0_ppc_configure_mcp();
if (machine_has_neponset()) {
/*
@@ -246,9 +336,17 @@ static void __init assabet_init(void)
#ifndef CONFIG_ASSABET_NEPONSET
printk( "Warning: Neponset detected but full support "
"hasn't been configured in the kernel\n" );
+#else
+ platform_device_register_simple("neponset", 0,
+ neponset_resources, ARRAY_SIZE(neponset_resources));
#endif
}
+#ifndef ASSABET_PAL_VIDEO
+ sa11x0_register_lcd(&lq039q2ds54_info);
+#else
+ sa11x0_register_lcd(&pal_video);
+#endif
sa11x0_register_mtd(&assabet_flash_data, assabet_flash_resources,
ARRAY_SIZE(assabet_flash_resources));
sa11x0_register_irda(&assabet_irda_data);
@@ -412,21 +510,8 @@ static void __init assabet_map_io(void)
*/
Ser1SDCR0 |= SDCR0_SUS;
- if (machine_has_neponset()) {
-#ifdef CONFIG_ASSABET_NEPONSET
- extern void neponset_map_io(void);
-
- /*
- * We map Neponset registers even if it isn't present since
- * many drivers will try to probe their stuff (and fail).
- * This is still more friendly than a kernel paging request
- * crash.
- */
- neponset_map_io();
-#endif
- } else {
+ if (!machine_has_neponset())
sa1100_register_uart_fns(&assabet_port_fns);
- }
/*
* When Neponset is attached, the first UART should be
@@ -449,6 +534,7 @@ MACHINE_START(ASSABET, "Intel-Assabet")
.atag_offset = 0x100,
.fixup = fixup_assabet,
.map_io = assabet_map_io,
+ .nr_irqs = SA1100_NR_IRQS,
.init_irq = sa1100_init_irq,
.timer = &sa1100_timer,
.init_machine = assabet_init,
diff --git a/arch/arm/mach-sa1100/badge4.c b/arch/arm/mach-sa1100/badge4.c
index b07a2c024cb..e0f0c030258 100644
--- a/arch/arm/mach-sa1100/badge4.c
+++ b/arch/arm/mach-sa1100/badge4.c
@@ -39,20 +39,27 @@
#include "generic.h"
static struct resource sa1111_resources[] = {
- [0] = {
- .start = BADGE4_SA1111_BASE,
- .end = BADGE4_SA1111_BASE + 0x00001fff,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = BADGE4_IRQ_GPIO_SA1111,
- .end = BADGE4_IRQ_GPIO_SA1111,
- .flags = IORESOURCE_IRQ,
- },
+ [0] = DEFINE_RES_MEM(BADGE4_SA1111_BASE, 0x2000),
+ [1] = DEFINE_RES_IRQ(BADGE4_IRQ_GPIO_SA1111),
};
+static int badge4_sa1111_enable(void *data, unsigned devid)
+{
+ if (devid == SA1111_DEVID_USB)
+ badge4_set_5V(BADGE4_5V_USB, 1);
+ return 0;
+}
+
+static void badge4_sa1111_disable(void *data, unsigned devid)
+{
+ if (devid == SA1111_DEVID_USB)
+ badge4_set_5V(BADGE4_5V_USB, 0);
+}
+
static struct sa1111_platform_data sa1111_info = {
- .irq_base = IRQ_BOARD_END,
+ .disable_devs = SA1111_DEVID_PS2_MSE,
+ .enable = badge4_sa1111_enable,
+ .disable = badge4_sa1111_disable,
};
static u64 sa1111_dmamask = 0xffffffffUL;
@@ -121,11 +128,8 @@ static struct flash_platform_data badge4_flash_data = {
.nr_parts = ARRAY_SIZE(badge4_partitions),
};
-static struct resource badge4_flash_resource = {
- .start = SA1100_CS0_PHYS,
- .end = SA1100_CS0_PHYS + SZ_64M - 1,
- .flags = IORESOURCE_MEM,
-};
+static struct resource badge4_flash_resource =
+ DEFINE_RES_MEM(SA1100_CS0_PHYS, SZ_64M);
static int five_v_on __initdata = 0;
@@ -269,11 +273,6 @@ static struct map_desc badge4_io_desc[] __initdata = {
.pfn = __phys_to_pfn(0x10000000),
.length = 0x00100000,
.type = MT_DEVICE
- }, { /* SA-1111 */
- .virtual = 0xf4000000,
- .pfn = __phys_to_pfn(0x48000000),
- .length = 0x00100000,
- .type = MT_DEVICE
}
};
@@ -304,6 +303,7 @@ static void __init badge4_map_io(void)
MACHINE_START(BADGE4, "Hewlett-Packard Laboratories BadgePAD 4")
.atag_offset = 0x100,
.map_io = badge4_map_io,
+ .nr_irqs = SA1100_NR_IRQS,
.init_irq = sa1100_init_irq,
.timer = &sa1100_timer,
#ifdef CONFIG_SA1111
diff --git a/arch/arm/mach-sa1100/cerf.c b/arch/arm/mach-sa1100/cerf.c
index 11bb6d0b9be..4a61f60e050 100644
--- a/arch/arm/mach-sa1100/cerf.c
+++ b/arch/arm/mach-sa1100/cerf.c
@@ -18,7 +18,6 @@
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
-#include <asm/irq.h>
#include <mach/hardware.h>
#include <asm/setup.h>
@@ -30,14 +29,11 @@
#include <mach/cerf.h>
#include <mach/mcp.h>
+#include <mach/irqs.h>
#include "generic.h"
static struct resource cerfuart2_resources[] = {
- [0] = {
- .start = 0x80030000,
- .end = 0x8003ffff,
- .flags = IORESOURCE_MEM,
- },
+ [0] = DEFINE_RES_MEM(0x80030000, SZ_64K),
};
static struct platform_device cerfuart2_device = {
@@ -87,11 +83,8 @@ static struct flash_platform_data cerf_flash_data = {
.nr_parts = ARRAY_SIZE(cerf_partitions),
};
-static struct resource cerf_flash_resource = {
- .start = SA1100_CS0_PHYS,
- .end = SA1100_CS0_PHYS + SZ_32M - 1,
- .flags = IORESOURCE_MEM,
-};
+static struct resource cerf_flash_resource =
+ DEFINE_RES_MEM(SA1100_CS0_PHYS, SZ_32M);
static void __init cerf_init_irq(void)
{
@@ -128,6 +121,7 @@ static struct mcp_plat_data cerf_mcp_data = {
static void __init cerf_init(void)
{
+ sa11x0_ppc_configure_mcp();
platform_add_devices(cerf_devices, ARRAY_SIZE(cerf_devices));
sa11x0_register_mtd(&cerf_flash_data, &cerf_flash_resource, 1);
sa11x0_register_mcp(&cerf_mcp_data);
@@ -136,6 +130,7 @@ static void __init cerf_init(void)
MACHINE_START(CERF, "Intrinsyc CerfBoard/CerfCube")
/* Maintainer: support@intrinsyc.com */
.map_io = cerf_map_io,
+ .nr_irqs = SA1100_NR_IRQS,
.init_irq = cerf_init_irq,
.timer = &sa1100_timer,
.init_machine = cerf_init,
diff --git a/arch/arm/mach-sa1100/collie.c b/arch/arm/mach-sa1100/collie.c
index fd5652118ed..48885b7efd6 100644
--- a/arch/arm/mach-sa1100/collie.c
+++ b/arch/arm/mach-sa1100/collie.c
@@ -22,15 +22,17 @@
#include <linux/tty.h>
#include <linux/delay.h>
#include <linux/platform_device.h>
+#include <linux/mfd/ucb1x00.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/timer.h>
#include <linux/gpio.h>
#include <linux/pda_power.h>
+#include <video/sa1100fb.h>
+
#include <mach/hardware.h>
#include <asm/mach-types.h>
-#include <asm/irq.h>
#include <asm/page.h>
#include <asm/setup.h>
#include <mach/collie.h>
@@ -44,15 +46,12 @@
#include <asm/mach/sharpsl_param.h>
#include <asm/hardware/locomo.h>
#include <mach/mcp.h>
+#include <mach/irqs.h>
#include "generic.h"
static struct resource collie_scoop_resources[] = {
- [0] = {
- .start = 0x40800000,
- .end = 0x40800fff,
- .flags = IORESOURCE_MEM,
- },
+ [0] = DEFINE_RES_MEM(0x40800000, SZ_4K),
};
static struct scoop_config collie_scoop_setup = {
@@ -85,10 +84,14 @@ static struct scoop_pcmcia_config collie_pcmcia_config = {
.num_devs = 1,
};
+static struct ucb1x00_plat_data collie_ucb1x00_data = {
+ .gpio_base = COLLIE_TC35143_GPIO_BASE,
+};
+
static struct mcp_plat_data collie_mcp_data = {
.mccr0 = MCCR0_ADM | MCCR0_ExtClk,
.sclk_rate = 9216000,
- .gpio_base = COLLIE_TC35143_GPIO_BASE,
+ .codec_pdata = &collie_ucb1x00_data,
};
/*
@@ -221,16 +224,8 @@ device_initcall(collie_uart_init);
static struct resource locomo_resources[] = {
- [0] = {
- .start = 0x40000000,
- .end = 0x40001fff,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_GPIO25,
- .end = IRQ_GPIO25,
- .flags = IORESOURCE_IRQ,
- },
+ [0] = DEFINE_RES_MEM(0x40000000, SZ_8K),
+ [1] = DEFINE_RES_IRQ(IRQ_GPIO25),
};
static struct locomo_platform_data locomo_info = {
@@ -303,11 +298,21 @@ static struct flash_platform_data collie_flash_data = {
};
static struct resource collie_flash_resources[] = {
- {
- .start = SA1100_CS0_PHYS,
- .end = SA1100_CS0_PHYS + SZ_32M - 1,
- .flags = IORESOURCE_MEM,
- }
+ DEFINE_RES_MEM(SA1100_CS0_PHYS, SZ_32M),
+};
+
+static struct sa1100fb_mach_info collie_lcd_info = {
+ .pixclock = 171521, .bpp = 16,
+ .xres = 320, .yres = 240,
+
+ .hsync_len = 5, .vsync_len = 1,
+ .left_margin = 11, .upper_margin = 2,
+ .right_margin = 30, .lower_margin = 0,
+
+ .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+
+ .lccr0 = LCCR0_Color | LCCR0_Sngl | LCCR0_Act,
+ .lccr3 = LCCR3_OutEnH | LCCR3_PixRsEdg | LCCR3_ACBsDiv(2),
};
static void __init collie_init(void)
@@ -341,6 +346,10 @@ static void __init collie_init(void)
collie_power_resource[0].start = gpio_to_irq(COLLIE_GPIO_AC_IN);
collie_power_resource[0].end = gpio_to_irq(COLLIE_GPIO_AC_IN);
+
+ sa11x0_ppc_configure_mcp();
+
+
platform_scoop_config = &collie_pcmcia_config;
ret = platform_add_devices(devices, ARRAY_SIZE(devices));
@@ -348,6 +357,7 @@ static void __init collie_init(void)
printk(KERN_WARNING "collie: Unable to register LoCoMo device\n");
}
+ sa11x0_register_lcd(&collie_lcd_info);
sa11x0_register_mtd(&collie_flash_data, collie_flash_resources,
ARRAY_SIZE(collie_flash_resources));
sa11x0_register_mcp(&collie_mcp_data);
@@ -383,6 +393,7 @@ static void __init collie_map_io(void)
MACHINE_START(COLLIE, "Sharp-Collie")
.map_io = collie_map_io,
+ .nr_irqs = SA1100_NR_IRQS,
.init_irq = sa1100_init_irq,
.timer = &sa1100_timer,
.init_machine = collie_init,
diff --git a/arch/arm/mach-sa1100/dma.c b/arch/arm/mach-sa1100/dma.c
deleted file mode 100644
index ad660350c29..00000000000
--- a/arch/arm/mach-sa1100/dma.c
+++ /dev/null
@@ -1,348 +0,0 @@
-/*
- * arch/arm/mach-sa1100/dma.c
- *
- * Support functions for the SA11x0 internal DMA channels.
- *
- * Copyright (C) 2000, 2001 by Nicolas Pitre
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/init.h>
-#include <linux/spinlock.h>
-#include <linux/errno.h>
-
-#include <asm/system.h>
-#include <asm/irq.h>
-#include <mach/hardware.h>
-#include <mach/dma.h>
-
-
-#undef DEBUG
-#ifdef DEBUG
-#define DPRINTK( s, arg... ) printk( "dma<%p>: " s, regs , ##arg )
-#else
-#define DPRINTK( x... )
-#endif
-
-
-typedef struct {
- const char *device_id; /* device name */
- u_long device; /* this channel device, 0 if unused*/
- dma_callback_t callback; /* to call when DMA completes */
- void *data; /* ... with private data ptr */
-} sa1100_dma_t;
-
-static sa1100_dma_t dma_chan[SA1100_DMA_CHANNELS];
-
-static DEFINE_SPINLOCK(dma_list_lock);
-
-
-static irqreturn_t dma_irq_handler(int irq, void *dev_id)
-{
- dma_regs_t *dma_regs = dev_id;
- sa1100_dma_t *dma = dma_chan + (((u_int)dma_regs >> 5) & 7);
- int status = dma_regs->RdDCSR;
-
- if (status & (DCSR_ERROR)) {
- printk(KERN_CRIT "DMA on \"%s\" caused an error\n", dma->device_id);
- dma_regs->ClrDCSR = DCSR_ERROR;
- }
-
- dma_regs->ClrDCSR = status & (DCSR_DONEA | DCSR_DONEB);
- if (dma->callback) {
- if (status & DCSR_DONEA)
- dma->callback(dma->data);
- if (status & DCSR_DONEB)
- dma->callback(dma->data);
- }
- return IRQ_HANDLED;
-}
-
-
-/**
- * sa1100_request_dma - allocate one of the SA11x0's DMA channels
- * @device: The SA11x0 peripheral targeted by this request
- * @device_id: An ascii name for the claiming device
- * @callback: Function to be called when the DMA completes
- * @data: A cookie passed back to the callback function
- * @dma_regs: Pointer to the location of the allocated channel's identifier
- *
- * This function will search for a free DMA channel and returns the
- * address of the hardware registers for that channel as the channel
- * identifier. This identifier is written to the location pointed by
- * @dma_regs. The list of possible values for @device are listed into
- * arch/arm/mach-sa1100/include/mach/dma.h as a dma_device_t enum.
- *
- * Note that reading from a port and writing to the same port are
- * actually considered as two different streams requiring separate
- * DMA registrations.
- *
- * The @callback function is called from interrupt context when one
- * of the two possible DMA buffers in flight has terminated. That
- * function has to be small and efficient while posponing more complex
- * processing to a lower priority execution context.
- *
- * If no channels are available, or if the desired @device is already in
- * use by another DMA channel, then an error code is returned. This
- * function must be called before any other DMA calls.
- **/
-
-int sa1100_request_dma (dma_device_t device, const char *device_id,
- dma_callback_t callback, void *data,
- dma_regs_t **dma_regs)
-{
- sa1100_dma_t *dma = NULL;
- dma_regs_t *regs;
- int i, err;
-
- *dma_regs = NULL;
-
- err = 0;
- spin_lock(&dma_list_lock);
- for (i = 0; i < SA1100_DMA_CHANNELS; i++) {
- if (dma_chan[i].device == device) {
- err = -EBUSY;
- break;
- } else if (!dma_chan[i].device && !dma) {
- dma = &dma_chan[i];
- }
- }
- if (!err) {
- if (dma)
- dma->device = device;
- else
- err = -ENOSR;
- }
- spin_unlock(&dma_list_lock);
- if (err)
- return err;
-
- i = dma - dma_chan;
- regs = (dma_regs_t *)&DDAR(i);
- err = request_irq(IRQ_DMA0 + i, dma_irq_handler, IRQF_DISABLED,
- device_id, regs);
- if (err) {
- printk(KERN_ERR
- "%s: unable to request IRQ %d for %s\n",
- __func__, IRQ_DMA0 + i, device_id);
- dma->device = 0;
- return err;
- }
-
- *dma_regs = regs;
- dma->device_id = device_id;
- dma->callback = callback;
- dma->data = data;
-
- regs->ClrDCSR =
- (DCSR_DONEA | DCSR_DONEB | DCSR_STRTA | DCSR_STRTB |
- DCSR_IE | DCSR_ERROR | DCSR_RUN);
- regs->DDAR = device;
-
- return 0;
-}
-
-
-/**
- * sa1100_free_dma - free a SA11x0 DMA channel
- * @regs: identifier for the channel to free
- *
- * This clears all activities on a given DMA channel and releases it
- * for future requests. The @regs identifier is provided by a
- * successful call to sa1100_request_dma().
- **/
-
-void sa1100_free_dma(dma_regs_t *regs)
-{
- int i;
-
- for (i = 0; i < SA1100_DMA_CHANNELS; i++)
- if (regs == (dma_regs_t *)&DDAR(i))
- break;
- if (i >= SA1100_DMA_CHANNELS) {
- printk(KERN_ERR "%s: bad DMA identifier\n", __func__);
- return;
- }
-
- if (!dma_chan[i].device) {
- printk(KERN_ERR "%s: Trying to free free DMA\n", __func__);
- return;
- }
-
- regs->ClrDCSR =
- (DCSR_DONEA | DCSR_DONEB | DCSR_STRTA | DCSR_STRTB |
- DCSR_IE | DCSR_ERROR | DCSR_RUN);
- free_irq(IRQ_DMA0 + i, regs);
- dma_chan[i].device = 0;
-}
-
-
-/**
- * sa1100_start_dma - submit a data buffer for DMA
- * @regs: identifier for the channel to use
- * @dma_ptr: buffer physical (or bus) start address
- * @size: buffer size
- *
- * This function hands the given data buffer to the hardware for DMA
- * access. If another buffer is already in flight then this buffer
- * will be queued so the DMA engine will switch to it automatically
- * when the previous one is done. The DMA engine is actually toggling
- * between two buffers so at most 2 successful calls can be made before
- * one of them terminates and the callback function is called.
- *
- * The @regs identifier is provided by a successful call to
- * sa1100_request_dma().
- *
- * The @size must not be larger than %MAX_DMA_SIZE. If a given buffer
- * is larger than that then it's the caller's responsibility to split
- * it into smaller chunks and submit them separately. If this is the
- * case then a @size of %CUT_DMA_SIZE is recommended to avoid ending
- * up with too small chunks. The callback function can be used to chain
- * submissions of buffer chunks.
- *
- * Error return values:
- * %-EOVERFLOW: Given buffer size is too big.
- * %-EBUSY: Both DMA buffers are already in use.
- * %-EAGAIN: Both buffers were busy but one of them just completed
- * but the interrupt handler has to execute first.
- *
- * This function returs 0 on success.
- **/
-
-int sa1100_start_dma(dma_regs_t *regs, dma_addr_t dma_ptr, u_int size)
-{
- unsigned long flags;
- u_long status;
- int ret;
-
- if (dma_ptr & 3)
- printk(KERN_WARNING "DMA: unaligned start address (0x%08lx)\n",
- (unsigned long)dma_ptr);
-
- if (size > MAX_DMA_SIZE)
- return -EOVERFLOW;
-
- local_irq_save(flags);
- status = regs->RdDCSR;
-
- /* If both DMA buffers are started, there's nothing else we can do. */
- if ((status & (DCSR_STRTA | DCSR_STRTB)) == (DCSR_STRTA | DCSR_STRTB)) {
- DPRINTK("start: st %#x busy\n", status);
- ret = -EBUSY;
- goto out;
- }
-
- if (((status & DCSR_BIU) && (status & DCSR_STRTB)) ||
- (!(status & DCSR_BIU) && !(status & DCSR_STRTA))) {
- if (status & DCSR_DONEA) {
- /* give a chance for the interrupt to be processed */
- ret = -EAGAIN;
- goto out;
- }
- regs->DBSA = dma_ptr;
- regs->DBTA = size;
- regs->SetDCSR = DCSR_STRTA | DCSR_IE | DCSR_RUN;
- DPRINTK("start a=%#x s=%d on A\n", dma_ptr, size);
- } else {
- if (status & DCSR_DONEB) {
- /* give a chance for the interrupt to be processed */
- ret = -EAGAIN;
- goto out;
- }
- regs->DBSB = dma_ptr;
- regs->DBTB = size;
- regs->SetDCSR = DCSR_STRTB | DCSR_IE | DCSR_RUN;
- DPRINTK("start a=%#x s=%d on B\n", dma_ptr, size);
- }
- ret = 0;
-
-out:
- local_irq_restore(flags);
- return ret;
-}
-
-
-/**
- * sa1100_get_dma_pos - return current DMA position
- * @regs: identifier for the channel to use
- *
- * This function returns the current physical (or bus) address for the
- * given DMA channel. If the channel is running i.e. not in a stopped
- * state then the caller must disable interrupts prior calling this
- * function and process the returned value before re-enabling them to
- * prevent races with the completion interrupt handler and the callback
- * function. The validation of the returned value is the caller's
- * responsibility as well -- the hardware seems to return out of range
- * values when the DMA engine completes a buffer.
- *
- * The @regs identifier is provided by a successful call to
- * sa1100_request_dma().
- **/
-
-dma_addr_t sa1100_get_dma_pos(dma_regs_t *regs)
-{
- int status;
-
- /*
- * We must determine whether buffer A or B is active.
- * Two possibilities: either we are in the middle of
- * a buffer, or the DMA controller just switched to the
- * next toggle but the interrupt hasn't been serviced yet.
- * The former case is straight forward. In the later case,
- * we'll do like if DMA is just at the end of the previous
- * toggle since all registers haven't been reset yet.
- * This goes around the edge case and since we're always
- * a little behind anyways it shouldn't make a big difference.
- * If DMA has been stopped prior calling this then the
- * position is exact.
- */
- status = regs->RdDCSR;
- if ((!(status & DCSR_BIU) && (status & DCSR_STRTA)) ||
- ( (status & DCSR_BIU) && !(status & DCSR_STRTB)))
- return regs->DBSA;
- else
- return regs->DBSB;
-}
-
-
-/**
- * sa1100_reset_dma - reset a DMA channel
- * @regs: identifier for the channel to use
- *
- * This function resets and reconfigure the given DMA channel. This is
- * particularly useful after a sleep/wakeup event.
- *
- * The @regs identifier is provided by a successful call to
- * sa1100_request_dma().
- **/
-
-void sa1100_reset_dma(dma_regs_t *regs)
-{
- int i;
-
- for (i = 0; i < SA1100_DMA_CHANNELS; i++)
- if (regs == (dma_regs_t *)&DDAR(i))
- break;
- if (i >= SA1100_DMA_CHANNELS) {
- printk(KERN_ERR "%s: bad DMA identifier\n", __func__);
- return;
- }
-
- regs->ClrDCSR =
- (DCSR_DONEA | DCSR_DONEB | DCSR_STRTA | DCSR_STRTB |
- DCSR_IE | DCSR_ERROR | DCSR_RUN);
- regs->DDAR = dma_chan[i].device;
-}
-
-
-EXPORT_SYMBOL(sa1100_request_dma);
-EXPORT_SYMBOL(sa1100_free_dma);
-EXPORT_SYMBOL(sa1100_start_dma);
-EXPORT_SYMBOL(sa1100_get_dma_pos);
-EXPORT_SYMBOL(sa1100_reset_dma);
-
diff --git a/arch/arm/mach-sa1100/generic.c b/arch/arm/mach-sa1100/generic.c
index 7c1ebf4a792..1d0f71b17a2 100644
--- a/arch/arm/mach-sa1100/generic.c
+++ b/arch/arm/mach-sa1100/generic.c
@@ -14,18 +14,23 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/delay.h>
+#include <linux/dma-mapping.h>
#include <linux/pm.h>
#include <linux/cpufreq.h>
#include <linux/ioport.h>
#include <linux/platform_device.h>
+#include <video/sa1100fb.h>
+
#include <asm/div64.h>
-#include <mach/hardware.h>
#include <asm/system.h>
#include <asm/mach/map.h>
#include <asm/mach/flash.h>
#include <asm/irq.h>
+#include <mach/hardware.h>
+#include <mach/irqs.h>
+
#include "generic.h"
unsigned int reset_status;
@@ -149,16 +154,8 @@ static void sa11x0_register_device(struct platform_device *dev, void *data)
static struct resource sa11x0udc_resources[] = {
- [0] = {
- .start = __PREG(Ser0UDCCR),
- .end = __PREG(Ser0UDCCR) + 0xffff,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_Ser0UDC,
- .end = IRQ_Ser0UDC,
- .flags = IORESOURCE_IRQ,
- },
+ [0] = DEFINE_RES_MEM(__PREG(Ser0UDCCR), SZ_64K),
+ [1] = DEFINE_RES_IRQ(IRQ_Ser0UDC),
};
static u64 sa11x0udc_dma_mask = 0xffffffffUL;
@@ -175,16 +172,8 @@ static struct platform_device sa11x0udc_device = {
};
static struct resource sa11x0uart1_resources[] = {
- [0] = {
- .start = __PREG(Ser1UTCR0),
- .end = __PREG(Ser1UTCR0) + 0xffff,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_Ser1UART,
- .end = IRQ_Ser1UART,
- .flags = IORESOURCE_IRQ,
- },
+ [0] = DEFINE_RES_MEM(__PREG(Ser1UTCR0), SZ_64K),
+ [1] = DEFINE_RES_IRQ(IRQ_Ser1UART),
};
static struct platform_device sa11x0uart1_device = {
@@ -195,16 +184,8 @@ static struct platform_device sa11x0uart1_device = {
};
static struct resource sa11x0uart3_resources[] = {
- [0] = {
- .start = __PREG(Ser3UTCR0),
- .end = __PREG(Ser3UTCR0) + 0xffff,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_Ser3UART,
- .end = IRQ_Ser3UART,
- .flags = IORESOURCE_IRQ,
- },
+ [0] = DEFINE_RES_MEM(__PREG(Ser3UTCR0), SZ_64K),
+ [1] = DEFINE_RES_IRQ(IRQ_Ser3UART),
};
static struct platform_device sa11x0uart3_device = {
@@ -215,16 +196,9 @@ static struct platform_device sa11x0uart3_device = {
};
static struct resource sa11x0mcp_resources[] = {
- [0] = {
- .start = __PREG(Ser4MCCR0),
- .end = __PREG(Ser4MCCR0) + 0xffff,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_Ser4MCP,
- .end = IRQ_Ser4MCP,
- .flags = IORESOURCE_IRQ,
- },
+ [0] = DEFINE_RES_MEM(__PREG(Ser4MCCR0), SZ_64K),
+ [1] = DEFINE_RES_MEM(__PREG(Ser4MCCR1), 4),
+ [2] = DEFINE_RES_IRQ(IRQ_Ser4MCP),
};
static u64 sa11x0mcp_dma_mask = 0xffffffffUL;
@@ -240,22 +214,24 @@ static struct platform_device sa11x0mcp_device = {
.resource = sa11x0mcp_resources,
};
+void __init sa11x0_ppc_configure_mcp(void)
+{
+ /* Setup the PPC unit for the MCP */
+ PPDR &= ~PPC_RXD4;
+ PPDR |= PPC_TXD4 | PPC_SCLK | PPC_SFRM;
+ PSDR |= PPC_RXD4;
+ PSDR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM);
+ PPSR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM);
+}
+
void sa11x0_register_mcp(struct mcp_plat_data *data)
{
sa11x0_register_device(&sa11x0mcp_device, data);
}
static struct resource sa11x0ssp_resources[] = {
- [0] = {
- .start = 0x80070000,
- .end = 0x8007ffff,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_Ser4SSP,
- .end = IRQ_Ser4SSP,
- .flags = IORESOURCE_IRQ,
- },
+ [0] = DEFINE_RES_MEM(0x80070000, SZ_64K),
+ [1] = DEFINE_RES_IRQ(IRQ_Ser4SSP),
};
static u64 sa11x0ssp_dma_mask = 0xffffffffUL;
@@ -272,16 +248,8 @@ static struct platform_device sa11x0ssp_device = {
};
static struct resource sa11x0fb_resources[] = {
- [0] = {
- .start = 0xb0100000,
- .end = 0xb010ffff,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_LCD,
- .end = IRQ_LCD,
- .flags = IORESOURCE_IRQ,
- },
+ [0] = DEFINE_RES_MEM(0xb0100000, SZ_64K),
+ [1] = DEFINE_RES_IRQ(IRQ_LCD),
};
static struct platform_device sa11x0fb_device = {
@@ -294,6 +262,11 @@ static struct platform_device sa11x0fb_device = {
.resource = sa11x0fb_resources,
};
+void sa11x0_register_lcd(struct sa1100fb_mach_info *inf)
+{
+ sa11x0_register_device(&sa11x0fb_device, inf);
+}
+
static struct platform_device sa11x0pcmcia_device = {
.name = "sa11x0-pcmcia",
.id = -1,
@@ -314,23 +287,10 @@ void sa11x0_register_mtd(struct flash_platform_data *flash,
}
static struct resource sa11x0ir_resources[] = {
- {
- .start = __PREG(Ser2UTCR0),
- .end = __PREG(Ser2UTCR0) + 0x24 - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .start = __PREG(Ser2HSCR0),
- .end = __PREG(Ser2HSCR0) + 0x1c - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .start = __PREG(Ser2HSCR2),
- .end = __PREG(Ser2HSCR2) + 0x04 - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .start = IRQ_Ser2ICP,
- .end = IRQ_Ser2ICP,
- .flags = IORESOURCE_IRQ,
- }
+ DEFINE_RES_MEM(__PREG(Ser2UTCR0), 0x24),
+ DEFINE_RES_MEM(__PREG(Ser2HSCR0), 0x1c),
+ DEFINE_RES_MEM(__PREG(Ser2HSCR2), 0x04),
+ DEFINE_RES_IRQ(IRQ_Ser2ICP),
};
static struct platform_device sa11x0ir_device = {
@@ -358,14 +318,37 @@ static struct platform_device sa11x0rtc_device = {
.resource = sa1100_rtc_resources,
};
+static struct resource sa11x0dma_resources[] = {
+ DEFINE_RES_MEM(DMA_PHYS, DMA_SIZE),
+ DEFINE_RES_IRQ(IRQ_DMA0),
+ DEFINE_RES_IRQ(IRQ_DMA1),
+ DEFINE_RES_IRQ(IRQ_DMA2),
+ DEFINE_RES_IRQ(IRQ_DMA3),
+ DEFINE_RES_IRQ(IRQ_DMA4),
+ DEFINE_RES_IRQ(IRQ_DMA5),
+};
+
+static u64 sa11x0dma_dma_mask = DMA_BIT_MASK(32);
+
+static struct platform_device sa11x0dma_device = {
+ .name = "sa11x0-dma",
+ .id = -1,
+ .dev = {
+ .dma_mask = &sa11x0dma_dma_mask,
+ .coherent_dma_mask = 0xffffffff,
+ },
+ .num_resources = ARRAY_SIZE(sa11x0dma_resources),
+ .resource = sa11x0dma_resources,
+};
+
static struct platform_device *sa11x0_devices[] __initdata = {
&sa11x0udc_device,
&sa11x0uart1_device,
&sa11x0uart3_device,
&sa11x0ssp_device,
&sa11x0pcmcia_device,
- &sa11x0fb_device,
&sa11x0rtc_device,
+ &sa11x0dma_device,
};
static int __init sa1100_init(void)
@@ -376,12 +359,6 @@ static int __init sa1100_init(void)
arch_initcall(sa1100_init);
-void (*sa1100fb_backlight_power)(int on);
-void (*sa1100fb_lcd_power)(int on);
-
-EXPORT_SYMBOL(sa1100fb_backlight_power);
-EXPORT_SYMBOL(sa1100fb_lcd_power);
-
/*
* Common I/O mapping:
@@ -436,7 +413,7 @@ void __init sa1100_map_io(void)
* the MBGNT signal false to ensure the SA1111 doesn't own the
* SDRAM bus.
*/
-void __init sa1110_mb_disable(void)
+void sa1110_mb_disable(void)
{
unsigned long flags;
@@ -455,7 +432,7 @@ void __init sa1110_mb_disable(void)
* If the system is going to use the SA-1111 DMA engines, set up
* the memory bus request/grant pins.
*/
-void __devinit sa1110_mb_enable(void)
+void sa1110_mb_enable(void)
{
unsigned long flags;
diff --git a/arch/arm/mach-sa1100/generic.h b/arch/arm/mach-sa1100/generic.h
index 33268cf6be3..9eb3b3cd5a6 100644
--- a/arch/arm/mach-sa1100/generic.h
+++ b/arch/arm/mach-sa1100/generic.h
@@ -16,9 +16,6 @@ extern void sa11x0_restart(char, const char *);
mi->bank[__nr].start = (__start), \
mi->bank[__nr].size = (__size)
-extern void (*sa1100fb_backlight_power)(int on);
-extern void (*sa1100fb_lcd_power)(int on);
-
extern void sa1110_mb_enable(void);
extern void sa1110_mb_disable(void);
@@ -39,4 +36,8 @@ struct irda_platform_data;
void sa11x0_register_irda(struct irda_platform_data *irda);
struct mcp_plat_data;
+void sa11x0_ppc_configure_mcp(void);
void sa11x0_register_mcp(struct mcp_plat_data *data);
+
+struct sa1100fb_mach_info;
+void sa11x0_register_lcd(struct sa1100fb_mach_info *inf);
diff --git a/arch/arm/mach-sa1100/h3100.c b/arch/arm/mach-sa1100/h3100.c
index 1e6b3c105ba..b2e8d0f418e 100644
--- a/arch/arm/mach-sa1100/h3100.c
+++ b/arch/arm/mach-sa1100/h3100.c
@@ -14,11 +14,14 @@
#include <linux/kernel.h>
#include <linux/gpio.h>
+#include <video/sa1100fb.h>
+
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/irda.h>
#include <mach/h3xxx.h>
+#include <mach/irqs.h>
#include "generic.h"
@@ -36,13 +39,28 @@ static void h3100_lcd_power(int enable)
}
}
+static struct sa1100fb_mach_info h3100_lcd_info = {
+ .pixclock = 406977, .bpp = 4,
+ .xres = 320, .yres = 240,
+
+ .hsync_len = 26, .vsync_len = 41,
+ .left_margin = 4, .upper_margin = 0,
+ .right_margin = 4, .lower_margin = 0,
+
+ .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+ .cmap_greyscale = 1,
+ .cmap_inverse = 1,
+
+ .lccr0 = LCCR0_Mono | LCCR0_4PixMono | LCCR0_Sngl | LCCR0_Pas,
+ .lccr3 = LCCR3_OutEnH | LCCR3_PixRsEdg | LCCR3_ACBsDiv(2),
+
+ .lcd_power = h3100_lcd_power,
+};
static void __init h3100_map_io(void)
{
h3xxx_map_io();
- sa1100fb_lcd_power = h3100_lcd_power;
-
/* Older bootldrs put GPIO2-9 in alternate mode on the
assumption that they are used for video */
GAFR &= ~0x000001fb;
@@ -80,12 +98,15 @@ static void __init h3100_mach_init(void)
{
h3xxx_init_gpio(h3100_default_gpio, ARRAY_SIZE(h3100_default_gpio));
h3xxx_mach_init();
+
+ sa11x0_register_lcd(&h3100_lcd_info);
sa11x0_register_irda(&h3100_irda_data);
}
MACHINE_START(H3100, "Compaq iPAQ H3100")
.atag_offset = 0x100,
.map_io = h3100_map_io,
+ .nr_irqs = SA1100_NR_IRQS,
.init_irq = sa1100_init_irq,
.timer = &sa1100_timer,
.init_machine = h3100_mach_init,
diff --git a/arch/arm/mach-sa1100/h3600.c b/arch/arm/mach-sa1100/h3600.c
index 6b58e7460ec..cb6659f294f 100644
--- a/arch/arm/mach-sa1100/h3600.c
+++ b/arch/arm/mach-sa1100/h3600.c
@@ -14,11 +14,14 @@
#include <linux/kernel.h>
#include <linux/gpio.h>
+#include <video/sa1100fb.h>
+
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/irda.h>
#include <mach/h3xxx.h>
+#include <mach/irqs.h>
#include "generic.h"
@@ -56,11 +59,35 @@ err2: gpio_free(H3XXX_EGPIO_LCD_ON);
err1: return;
}
+static const struct sa1100fb_rgb h3600_rgb_16 = {
+ .red = { .offset = 12, .length = 4, },
+ .green = { .offset = 7, .length = 4, },
+ .blue = { .offset = 1, .length = 4, },
+ .transp = { .offset = 0, .length = 0, },
+};
+
+static struct sa1100fb_mach_info h3600_lcd_info = {
+ .pixclock = 174757, .bpp = 16,
+ .xres = 320, .yres = 240,
+
+ .hsync_len = 3, .vsync_len = 3,
+ .left_margin = 12, .upper_margin = 10,
+ .right_margin = 17, .lower_margin = 1,
+
+ .cmap_static = 1,
+
+ .lccr0 = LCCR0_Color | LCCR0_Sngl | LCCR0_Act,
+ .lccr3 = LCCR3_OutEnH | LCCR3_PixRsEdg | LCCR3_ACBsDiv(2),
+
+ .rgb[RGB_16] = &h3600_rgb_16,
+
+ .lcd_power = h3600_lcd_power,
+};
+
+
static void __init h3600_map_io(void)
{
h3xxx_map_io();
-
- sa1100fb_lcd_power = h3600_lcd_power;
}
/*
@@ -121,12 +148,15 @@ static void __init h3600_mach_init(void)
{
h3xxx_init_gpio(h3600_default_gpio, ARRAY_SIZE(h3600_default_gpio));
h3xxx_mach_init();
+
+ sa11x0_register_lcd(&h3600_lcd_info);
sa11x0_register_irda(&h3600_irda_data);
}
MACHINE_START(H3600, "Compaq iPAQ H3600")
.atag_offset = 0x100,
.map_io = h3600_map_io,
+ .nr_irqs = SA1100_NR_IRQS,
.init_irq = sa1100_init_irq,
.timer = &sa1100_timer,
.init_machine = h3600_mach_init,
diff --git a/arch/arm/mach-sa1100/h3xxx.c b/arch/arm/mach-sa1100/h3xxx.c
index b0784c974c2..63150e1ffe9 100644
--- a/arch/arm/mach-sa1100/h3xxx.c
+++ b/arch/arm/mach-sa1100/h3xxx.c
@@ -109,11 +109,8 @@ static struct flash_platform_data h3xxx_flash_data = {
.nr_parts = ARRAY_SIZE(h3xxx_partitions),
};
-static struct resource h3xxx_flash_resource = {
- .start = SA1100_CS0_PHYS,
- .end = SA1100_CS0_PHYS + SZ_32M - 1,
- .flags = IORESOURCE_MEM,
-};
+static struct resource h3xxx_flash_resource =
+ DEFINE_RES_MEM(SA1100_CS0_PHYS, SZ_32M);
/*
@@ -186,11 +183,7 @@ static struct sa1100_port_fns h3xxx_port_fns __initdata = {
*/
static struct resource egpio_resources[] = {
- [0] = {
- .start = H3600_EGPIO_PHYS,
- .end = H3600_EGPIO_PHYS + 0x4 - 1,
- .flags = IORESOURCE_MEM,
- },
+ [0] = DEFINE_RES_MEM(H3600_EGPIO_PHYS, 0x4),
};
static struct htc_egpio_chip egpio_chips[] = {
diff --git a/arch/arm/mach-sa1100/hackkit.c b/arch/arm/mach-sa1100/hackkit.c
index c01bb36db94..5535475bf58 100644
--- a/arch/arm/mach-sa1100/hackkit.c
+++ b/arch/arm/mach-sa1100/hackkit.c
@@ -22,12 +22,10 @@
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
-#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/setup.h>
#include <asm/page.h>
#include <asm/pgtable.h>
-#include <asm/irq.h>
#include <asm/mach/arch.h>
#include <asm/mach/flash.h>
@@ -35,6 +33,9 @@
#include <asm/mach/irq.h>
#include <asm/mach/serial_sa1100.h>
+#include <mach/hardware.h>
+#include <mach/irqs.h>
+
#include "generic.h"
/**********************************************************************
@@ -179,11 +180,8 @@ static struct flash_platform_data hackkit_flash_data = {
.nr_parts = ARRAY_SIZE(hackkit_partitions),
};
-static struct resource hackkit_flash_resource = {
- .start = SA1100_CS0_PHYS,
- .end = SA1100_CS0_PHYS + SZ_32M,
- .flags = IORESOURCE_MEM,
-};
+static struct resource hackkit_flash_resource =
+ DEFINE_RES_MEM(SA1100_CS0_PHYS, SZ_32M);
static void __init hackkit_init(void)
{
@@ -197,6 +195,7 @@ static void __init hackkit_init(void)
MACHINE_START(HACKKIT, "HackKit Cpu Board")
.atag_offset = 0x100,
.map_io = hackkit_map_io,
+ .nr_irqs = SA1100_NR_IRQS,
.init_irq = sa1100_init_irq,
.timer = &sa1100_timer,
.init_machine = hackkit_init,
diff --git a/arch/arm/mach-sa1100/include/mach/SA-1100.h b/arch/arm/mach-sa1100/include/mach/SA-1100.h
index bae8296f5db..3f2d1b60188 100644
--- a/arch/arm/mach-sa1100/include/mach/SA-1100.h
+++ b/arch/arm/mach-sa1100/include/mach/SA-1100.h
@@ -1590,224 +1590,9 @@
/*
* Direct Memory Access (DMA) control registers
- *
- * Registers
- * DDAR0 Direct Memory Access (DMA) Device Address Register
- * channel 0 (read/write).
- * DCSR0 Direct Memory Access (DMA) Control and Status
- * Register channel 0 (read/write).
- * DBSA0 Direct Memory Access (DMA) Buffer Start address
- * register A channel 0 (read/write).
- * DBTA0 Direct Memory Access (DMA) Buffer Transfer count
- * register A channel 0 (read/write).
- * DBSB0 Direct Memory Access (DMA) Buffer Start address
- * register B channel 0 (read/write).
- * DBTB0 Direct Memory Access (DMA) Buffer Transfer count
- * register B channel 0 (read/write).
- *
- * DDAR1 Direct Memory Access (DMA) Device Address Register
- * channel 1 (read/write).
- * DCSR1 Direct Memory Access (DMA) Control and Status
- * Register channel 1 (read/write).
- * DBSA1 Direct Memory Access (DMA) Buffer Start address
- * register A channel 1 (read/write).
- * DBTA1 Direct Memory Access (DMA) Buffer Transfer count
- * register A channel 1 (read/write).
- * DBSB1 Direct Memory Access (DMA) Buffer Start address
- * register B channel 1 (read/write).
- * DBTB1 Direct Memory Access (DMA) Buffer Transfer count
- * register B channel 1 (read/write).
- *
- * DDAR2 Direct Memory Access (DMA) Device Address Register
- * channel 2 (read/write).
- * DCSR2 Direct Memory Access (DMA) Control and Status
- * Register channel 2 (read/write).
- * DBSA2 Direct Memory Access (DMA) Buffer Start address
- * register A channel 2 (read/write).
- * DBTA2 Direct Memory Access (DMA) Buffer Transfer count
- * register A channel 2 (read/write).
- * DBSB2 Direct Memory Access (DMA) Buffer Start address
- * register B channel 2 (read/write).
- * DBTB2 Direct Memory Access (DMA) Buffer Transfer count
- * register B channel 2 (read/write).
- *
- * DDAR3 Direct Memory Access (DMA) Device Address Register
- * channel 3 (read/write).
- * DCSR3 Direct Memory Access (DMA) Control and Status
- * Register channel 3 (read/write).
- * DBSA3 Direct Memory Access (DMA) Buffer Start address
- * register A channel 3 (read/write).
- * DBTA3 Direct Memory Access (DMA) Buffer Transfer count
- * register A channel 3 (read/write).
- * DBSB3 Direct Memory Access (DMA) Buffer Start address
- * register B channel 3 (read/write).
- * DBTB3 Direct Memory Access (DMA) Buffer Transfer count
- * register B channel 3 (read/write).
- *
- * DDAR4 Direct Memory Access (DMA) Device Address Register
- * channel 4 (read/write).
- * DCSR4 Direct Memory Access (DMA) Control and Status
- * Register channel 4 (read/write).
- * DBSA4 Direct Memory Access (DMA) Buffer Start address
- * register A channel 4 (read/write).
- * DBTA4 Direct Memory Access (DMA) Buffer Transfer count
- * register A channel 4 (read/write).
- * DBSB4 Direct Memory Access (DMA) Buffer Start address
- * register B channel 4 (read/write).
- * DBTB4 Direct Memory Access (DMA) Buffer Transfer count
- * register B channel 4 (read/write).
- *
- * DDAR5 Direct Memory Access (DMA) Device Address Register
- * channel 5 (read/write).
- * DCSR5 Direct Memory Access (DMA) Control and Status
- * Register channel 5 (read/write).
- * DBSA5 Direct Memory Access (DMA) Buffer Start address
- * register A channel 5 (read/write).
- * DBTA5 Direct Memory Access (DMA) Buffer Transfer count
- * register A channel 5 (read/write).
- * DBSB5 Direct Memory Access (DMA) Buffer Start address
- * register B channel 5 (read/write).
- * DBTB5 Direct Memory Access (DMA) Buffer Transfer count
- * register B channel 5 (read/write).
*/
-
-#define DMASp 0x00000020 /* DMA control reg. Space [byte] */
-
-#define DDAR(Nb) __REG(0xB0000000 + (Nb)*DMASp) /* DMA Device Address Reg. channel [0..5] */
-#define SetDCSR(Nb) __REG(0xB0000004 + (Nb)*DMASp) /* Set DMA Control & Status Reg. channel [0..5] (write) */
-#define ClrDCSR(Nb) __REG(0xB0000008 + (Nb)*DMASp) /* Clear DMA Control & Status Reg. channel [0..5] (write) */
-#define RdDCSR(Nb) __REG(0xB000000C + (Nb)*DMASp) /* Read DMA Control & Status Reg. channel [0..5] (read) */
-#define DBSA(Nb) __REG(0xB0000010 + (Nb)*DMASp) /* DMA Buffer Start address reg. A channel [0..5] */
-#define DBTA(Nb) __REG(0xB0000014 + (Nb)*DMASp) /* DMA Buffer Transfer count reg. A channel [0..5] */
-#define DBSB(Nb) __REG(0xB0000018 + (Nb)*DMASp) /* DMA Buffer Start address reg. B channel [0..5] */
-#define DBTB(Nb) __REG(0xB000001C + (Nb)*DMASp) /* DMA Buffer Transfer count reg. B channel [0..5] */
-
-#define DDAR_RW 0x00000001 /* device data Read/Write */
-#define DDAR_DevWr (DDAR_RW*0) /* Device data Write */
- /* (memory -> device) */
-#define DDAR_DevRd (DDAR_RW*1) /* Device data Read */
- /* (device -> memory) */
-#define DDAR_E 0x00000002 /* big/little Endian device */
-#define DDAR_LtlEnd (DDAR_E*0) /* Little Endian device */
-#define DDAR_BigEnd (DDAR_E*1) /* Big Endian device */
-#define DDAR_BS 0x00000004 /* device Burst Size */
-#define DDAR_Brst4 (DDAR_BS*0) /* Burst-of-4 device */
-#define DDAR_Brst8 (DDAR_BS*1) /* Burst-of-8 device */
-#define DDAR_DW 0x00000008 /* device Data Width */
-#define DDAR_8BitDev (DDAR_DW*0) /* 8-Bit Device */
-#define DDAR_16BitDev (DDAR_DW*1) /* 16-Bit Device */
-#define DDAR_DS Fld (4, 4) /* Device Select */
-#define DDAR_Ser0UDCTr /* Ser. port 0 UDC Transmit */ \
- (0x0 << FShft (DDAR_DS))
-#define DDAR_Ser0UDCRc /* Ser. port 0 UDC Receive */ \
- (0x1 << FShft (DDAR_DS))
-#define DDAR_Ser1SDLCTr /* Ser. port 1 SDLC Transmit */ \
- (0x2 << FShft (DDAR_DS))
-#define DDAR_Ser1SDLCRc /* Ser. port 1 SDLC Receive */ \
- (0x3 << FShft (DDAR_DS))
-#define DDAR_Ser1UARTTr /* Ser. port 1 UART Transmit */ \
- (0x4 << FShft (DDAR_DS))
-#define DDAR_Ser1UARTRc /* Ser. port 1 UART Receive */ \
- (0x5 << FShft (DDAR_DS))
-#define DDAR_Ser2ICPTr /* Ser. port 2 ICP Transmit */ \
- (0x6 << FShft (DDAR_DS))
-#define DDAR_Ser2ICPRc /* Ser. port 2 ICP Receive */ \
- (0x7 << FShft (DDAR_DS))
-#define DDAR_Ser3UARTTr /* Ser. port 3 UART Transmit */ \
- (0x8 << FShft (DDAR_DS))
-#define DDAR_Ser3UARTRc /* Ser. port 3 UART Receive */ \
- (0x9 << FShft (DDAR_DS))
-#define DDAR_Ser4MCP0Tr /* Ser. port 4 MCP 0 Transmit */ \
- /* (audio) */ \
- (0xA << FShft (DDAR_DS))
-#define DDAR_Ser4MCP0Rc /* Ser. port 4 MCP 0 Receive */ \
- /* (audio) */ \
- (0xB << FShft (DDAR_DS))
-#define DDAR_Ser4MCP1Tr /* Ser. port 4 MCP 1 Transmit */ \
- /* (telecom) */ \
- (0xC << FShft (DDAR_DS))
-#define DDAR_Ser4MCP1Rc /* Ser. port 4 MCP 1 Receive */ \
- /* (telecom) */ \
- (0xD << FShft (DDAR_DS))
-#define DDAR_Ser4SSPTr /* Ser. port 4 SSP Transmit */ \
- (0xE << FShft (DDAR_DS))
-#define DDAR_Ser4SSPRc /* Ser. port 4 SSP Receive */ \
- (0xF << FShft (DDAR_DS))
-#define DDAR_DA Fld (24, 8) /* Device Address */
-#define DDAR_DevAdd(Add) /* Device Address */ \
- (((Add) & 0xF0000000) | \
- (((Add) & 0X003FFFFC) << (FShft (DDAR_DA) - 2)))
-#define DDAR_Ser0UDCWr /* Ser. port 0 UDC Write */ \
- (DDAR_DevWr + DDAR_Brst8 + DDAR_8BitDev + \
- DDAR_Ser0UDCTr + DDAR_DevAdd (__PREG(Ser0UDCDR)))
-#define DDAR_Ser0UDCRd /* Ser. port 0 UDC Read */ \
- (DDAR_DevRd + DDAR_Brst8 + DDAR_8BitDev + \
- DDAR_Ser0UDCRc + DDAR_DevAdd (__PREG(Ser0UDCDR)))
-#define DDAR_Ser1UARTWr /* Ser. port 1 UART Write */ \
- (DDAR_DevWr + DDAR_Brst4 + DDAR_8BitDev + \
- DDAR_Ser1UARTTr + DDAR_DevAdd (__PREG(Ser1UTDR)))
-#define DDAR_Ser1UARTRd /* Ser. port 1 UART Read */ \
- (DDAR_DevRd + DDAR_Brst4 + DDAR_8BitDev + \
- DDAR_Ser1UARTRc + DDAR_DevAdd (__PREG(Ser1UTDR)))
-#define DDAR_Ser1SDLCWr /* Ser. port 1 SDLC Write */ \
- (DDAR_DevWr + DDAR_Brst4 + DDAR_8BitDev + \
- DDAR_Ser1SDLCTr + DDAR_DevAdd (__PREG(Ser1SDDR)))
-#define DDAR_Ser1SDLCRd /* Ser. port 1 SDLC Read */ \
- (DDAR_DevRd + DDAR_Brst4 + DDAR_8BitDev + \
- DDAR_Ser1SDLCRc + DDAR_DevAdd (__PREG(Ser1SDDR)))
-#define DDAR_Ser2UARTWr /* Ser. port 2 UART Write */ \
- (DDAR_DevWr + DDAR_Brst4 + DDAR_8BitDev + \
- DDAR_Ser2ICPTr + DDAR_DevAdd (__PREG(Ser2UTDR)))
-#define DDAR_Ser2UARTRd /* Ser. port 2 UART Read */ \
- (DDAR_DevRd + DDAR_Brst4 + DDAR_8BitDev + \
- DDAR_Ser2ICPRc + DDAR_DevAdd (__PREG(Ser2UTDR)))
-#define DDAR_Ser2HSSPWr /* Ser. port 2 HSSP Write */ \
- (DDAR_DevWr + DDAR_Brst8 + DDAR_8BitDev + \
- DDAR_Ser2ICPTr + DDAR_DevAdd (__PREG(Ser2HSDR)))
-#define DDAR_Ser2HSSPRd /* Ser. port 2 HSSP Read */ \
- (DDAR_DevRd + DDAR_Brst8 + DDAR_8BitDev + \
- DDAR_Ser2ICPRc + DDAR_DevAdd (__PREG(Ser2HSDR)))
-#define DDAR_Ser3UARTWr /* Ser. port 3 UART Write */ \
- (DDAR_DevWr + DDAR_Brst4 + DDAR_8BitDev + \
- DDAR_Ser3UARTTr + DDAR_DevAdd (__PREG(Ser3UTDR)))
-#define DDAR_Ser3UARTRd /* Ser. port 3 UART Read */ \
- (DDAR_DevRd + DDAR_Brst4 + DDAR_8BitDev + \
- DDAR_Ser3UARTRc + DDAR_DevAdd (__PREG(Ser3UTDR)))
-#define DDAR_Ser4MCP0Wr /* Ser. port 4 MCP 0 Write (audio) */ \
- (DDAR_DevWr + DDAR_Brst4 + DDAR_16BitDev + \
- DDAR_Ser4MCP0Tr + DDAR_DevAdd (__PREG(Ser4MCDR0)))
-#define DDAR_Ser4MCP0Rd /* Ser. port 4 MCP 0 Read (audio) */ \
- (DDAR_DevRd + DDAR_Brst4 + DDAR_16BitDev + \
- DDAR_Ser4MCP0Rc + DDAR_DevAdd (__PREG(Ser4MCDR0)))
-#define DDAR_Ser4MCP1Wr /* Ser. port 4 MCP 1 Write */ \
- /* (telecom) */ \
- (DDAR_DevWr + DDAR_Brst4 + DDAR_16BitDev + \
- DDAR_Ser4MCP1Tr + DDAR_DevAdd (__PREG(Ser4MCDR1)))
-#define DDAR_Ser4MCP1Rd /* Ser. port 4 MCP 1 Read */ \
- /* (telecom) */ \
- (DDAR_DevRd + DDAR_Brst4 + DDAR_16BitDev + \
- DDAR_Ser4MCP1Rc + DDAR_DevAdd (__PREG(Ser4MCDR1)))
-#define DDAR_Ser4SSPWr /* Ser. port 4 SSP Write (16 bits) */ \
- (DDAR_DevWr + DDAR_Brst4 + DDAR_16BitDev + \
- DDAR_Ser4SSPTr + DDAR_DevAdd (__PREG(Ser4SSDR)))
-#define DDAR_Ser4SSPRd /* Ser. port 4 SSP Read (16 bits) */ \
- (DDAR_DevRd + DDAR_Brst4 + DDAR_16BitDev + \
- DDAR_Ser4SSPRc + DDAR_DevAdd (__PREG(Ser4SSDR)))
-
-#define DCSR_RUN 0x00000001 /* DMA running */
-#define DCSR_IE 0x00000002 /* DMA Interrupt Enable */
-#define DCSR_ERROR 0x00000004 /* DMA ERROR */
-#define DCSR_DONEA 0x00000008 /* DONE DMA transfer buffer A */
-#define DCSR_STRTA 0x00000010 /* STaRTed DMA transfer buffer A */
-#define DCSR_DONEB 0x00000020 /* DONE DMA transfer buffer B */
-#define DCSR_STRTB 0x00000040 /* STaRTed DMA transfer buffer B */
-#define DCSR_BIU 0x00000080 /* DMA Buffer In Use */
-#define DCSR_BufA (DCSR_BIU*0) /* DMA Buffer A in use */
-#define DCSR_BufB (DCSR_BIU*1) /* DMA Buffer B in use */
-
-#define DBT_TC Fld (13, 0) /* Transfer Count */
-#define DBTA_TCA DBT_TC /* Transfer Count buffer A */
-#define DBTB_TCB DBT_TC /* Transfer Count buffer B */
+#define DMA_SIZE (6 * 0x20)
+#define DMA_PHYS 0xb0000000
/*
@@ -1903,16 +1688,6 @@
#define LCD_Int100_0A 0xF /* LCD Intensity = 100.0% = 1 */
/* (Alternative) */
-#define LCCR0 __REG(0xB0100000) /* LCD Control Reg. 0 */
-#define LCSR __REG(0xB0100004) /* LCD Status Reg. */
-#define DBAR1 __REG(0xB0100010) /* LCD DMA Base Address Reg. channel 1 */
-#define DCAR1 __REG(0xB0100014) /* LCD DMA Current Address Reg. channel 1 */
-#define DBAR2 __REG(0xB0100018) /* LCD DMA Base Address Reg. channel 2 */
-#define DCAR2 __REG(0xB010001C) /* LCD DMA Current Address Reg. channel 2 */
-#define LCCR1 __REG(0xB0100020) /* LCD Control Reg. 1 */
-#define LCCR2 __REG(0xB0100024) /* LCD Control Reg. 2 */
-#define LCCR3 __REG(0xB0100028) /* LCD Control Reg. 3 */
-
#define LCCR0_LEN 0x00000001 /* LCD ENable */
#define LCCR0_CMS 0x00000002 /* Color/Monochrome display Select */
#define LCCR0_Color (LCCR0_CMS*0) /* Color display */
diff --git a/arch/arm/mach-sa1100/include/mach/dma.h b/arch/arm/mach-sa1100/include/mach/dma.h
deleted file mode 100644
index dda1b351310..00000000000
--- a/arch/arm/mach-sa1100/include/mach/dma.h
+++ /dev/null
@@ -1,117 +0,0 @@
-/*
- * arch/arm/mach-sa1100/include/mach/dma.h
- *
- * Generic SA1100 DMA support
- *
- * Copyright (C) 2000 Nicolas Pitre
- *
- */
-
-#ifndef __ASM_ARCH_DMA_H
-#define __ASM_ARCH_DMA_H
-
-#include "hardware.h"
-
-
-/*
- * The SA1100 has six internal DMA channels.
- */
-#define SA1100_DMA_CHANNELS 6
-
-/*
- * Maximum physical DMA buffer size
- */
-#define MAX_DMA_SIZE 0x1fff
-#define CUT_DMA_SIZE 0x1000
-
-/*
- * All possible SA1100 devices a DMA channel can be attached to.
- */
-typedef enum {
- DMA_Ser0UDCWr = DDAR_Ser0UDCWr, /* Ser. port 0 UDC Write */
- DMA_Ser0UDCRd = DDAR_Ser0UDCRd, /* Ser. port 0 UDC Read */
- DMA_Ser1UARTWr = DDAR_Ser1UARTWr, /* Ser. port 1 UART Write */
- DMA_Ser1UARTRd = DDAR_Ser1UARTRd, /* Ser. port 1 UART Read */
- DMA_Ser1SDLCWr = DDAR_Ser1SDLCWr, /* Ser. port 1 SDLC Write */
- DMA_Ser1SDLCRd = DDAR_Ser1SDLCRd, /* Ser. port 1 SDLC Read */
- DMA_Ser2UARTWr = DDAR_Ser2UARTWr, /* Ser. port 2 UART Write */
- DMA_Ser2UARTRd = DDAR_Ser2UARTRd, /* Ser. port 2 UART Read */
- DMA_Ser2HSSPWr = DDAR_Ser2HSSPWr, /* Ser. port 2 HSSP Write */
- DMA_Ser2HSSPRd = DDAR_Ser2HSSPRd, /* Ser. port 2 HSSP Read */
- DMA_Ser3UARTWr = DDAR_Ser3UARTWr, /* Ser. port 3 UART Write */
- DMA_Ser3UARTRd = DDAR_Ser3UARTRd, /* Ser. port 3 UART Read */
- DMA_Ser4MCP0Wr = DDAR_Ser4MCP0Wr, /* Ser. port 4 MCP 0 Write (audio) */
- DMA_Ser4MCP0Rd = DDAR_Ser4MCP0Rd, /* Ser. port 4 MCP 0 Read (audio) */
- DMA_Ser4MCP1Wr = DDAR_Ser4MCP1Wr, /* Ser. port 4 MCP 1 Write */
- DMA_Ser4MCP1Rd = DDAR_Ser4MCP1Rd, /* Ser. port 4 MCP 1 Read */
- DMA_Ser4SSPWr = DDAR_Ser4SSPWr, /* Ser. port 4 SSP Write (16 bits) */
- DMA_Ser4SSPRd = DDAR_Ser4SSPRd /* Ser. port 4 SSP Read (16 bits) */
-} dma_device_t;
-
-typedef struct {
- volatile u_long DDAR;
- volatile u_long SetDCSR;
- volatile u_long ClrDCSR;
- volatile u_long RdDCSR;
- volatile dma_addr_t DBSA;
- volatile u_long DBTA;
- volatile dma_addr_t DBSB;
- volatile u_long DBTB;
-} dma_regs_t;
-
-typedef void (*dma_callback_t)(void *data);
-
-/*
- * DMA function prototypes
- */
-
-extern int sa1100_request_dma( dma_device_t device, const char *device_id,
- dma_callback_t callback, void *data,
- dma_regs_t **regs );
-extern void sa1100_free_dma( dma_regs_t *regs );
-extern int sa1100_start_dma( dma_regs_t *regs, dma_addr_t dma_ptr, u_int size );
-extern dma_addr_t sa1100_get_dma_pos(dma_regs_t *regs);
-extern void sa1100_reset_dma(dma_regs_t *regs);
-
-/**
- * sa1100_stop_dma - stop DMA in progress
- * @regs: identifier for the channel to use
- *
- * This stops DMA without clearing buffer pointers. Unlike
- * sa1100_clear_dma() this allows subsequent use of sa1100_resume_dma()
- * or sa1100_get_dma_pos().
- *
- * The @regs identifier is provided by a successful call to
- * sa1100_request_dma().
- **/
-
-#define sa1100_stop_dma(regs) ((regs)->ClrDCSR = DCSR_IE|DCSR_RUN)
-
-/**
- * sa1100_resume_dma - resume DMA on a stopped channel
- * @regs: identifier for the channel to use
- *
- * This resumes DMA on a channel previously stopped with
- * sa1100_stop_dma().
- *
- * The @regs identifier is provided by a successful call to
- * sa1100_request_dma().
- **/
-
-#define sa1100_resume_dma(regs) ((regs)->SetDCSR = DCSR_IE|DCSR_RUN)
-
-/**
- * sa1100_clear_dma - clear DMA pointers
- * @regs: identifier for the channel to use
- *
- * This clear any DMA state so the DMA engine is ready to restart
- * with new buffers through sa1100_start_dma(). Any buffers in flight
- * are discarded.
- *
- * The @regs identifier is provided by a successful call to
- * sa1100_request_dma().
- **/
-
-#define sa1100_clear_dma(regs) ((regs)->ClrDCSR = DCSR_IE|DCSR_RUN|DCSR_STRTA|DCSR_STRTB)
-
-#endif /* _ASM_ARCH_DMA_H */
diff --git a/arch/arm/mach-sa1100/include/mach/irqs.h b/arch/arm/mach-sa1100/include/mach/irqs.h
index d18f21abef8..3790298b714 100644
--- a/arch/arm/mach-sa1100/include/mach/irqs.h
+++ b/arch/arm/mach-sa1100/include/mach/irqs.h
@@ -71,22 +71,19 @@
/*
* Figure out the MAX IRQ number.
*
- * If we have an SA1111, the max IRQ is S1_BVD1_STSCHG+1.
- * If we have an LoCoMo, the max IRQ is IRQ_BOARD_START + 4
- * Otherwise, we have the standard IRQs only.
+ * Neponset, SA1111 and UCB1x00 are sparse IRQ aware, so can dynamically
+ * allocate their IRQs above NR_IRQS.
+ *
+ * LoCoMo has 4 additional IRQs, but is not sparse IRQ aware, and so has
+ * to be included in the NR_IRQS calculation.
*/
-#ifdef CONFIG_SA1111
-#define NR_IRQS (IRQ_BOARD_END + 55)
-#elif defined(CONFIG_SHARP_LOCOMO)
-#define NR_IRQS (IRQ_BOARD_START + 4)
+#ifdef CONFIG_SHARP_LOCOMO
+#define NR_IRQS_LOCOMO 4
#else
-#define NR_IRQS (IRQ_BOARD_START)
+#define NR_IRQS_LOCOMO 0
#endif
-/*
- * Board specific IRQs. Define them here.
- * Do not surround them with ifdefs.
- */
-#define IRQ_NEPONSET_SMC9196 (IRQ_BOARD_START + 0)
-#define IRQ_NEPONSET_USAR (IRQ_BOARD_START + 1)
-#define IRQ_NEPONSET_SA1111 (IRQ_BOARD_START + 2)
+#ifndef NR_IRQS
+#define NR_IRQS (IRQ_BOARD_START + NR_IRQS_LOCOMO)
+#endif
+#define SA1100_NR_IRQS (IRQ_BOARD_START + NR_IRQS_LOCOMO)
diff --git a/arch/arm/mach-sa1100/include/mach/mcp.h b/arch/arm/mach-sa1100/include/mach/mcp.h
index ed1a331508a..4b2860ae382 100644
--- a/arch/arm/mach-sa1100/include/mach/mcp.h
+++ b/arch/arm/mach-sa1100/include/mach/mcp.h
@@ -16,7 +16,7 @@ struct mcp_plat_data {
u32 mccr0;
u32 mccr1;
unsigned int sclk_rate;
- int gpio_base;
+ void *codec_pdata;
};
#endif
diff --git a/arch/arm/mach-sa1100/include/mach/neponset.h b/arch/arm/mach-sa1100/include/mach/neponset.h
index ffe2bc45eed..5516a52a329 100644
--- a/arch/arm/mach-sa1100/include/mach/neponset.h
+++ b/arch/arm/mach-sa1100/include/mach/neponset.h
@@ -15,54 +15,6 @@
/*
* Neponset definitions:
*/
-
-#define NEPONSET_CPLD_BASE (0x10000000)
-#define Nep_p2v( x ) ((x) - NEPONSET_CPLD_BASE + 0xf3000000)
-#define Nep_v2p( x ) ((x) - 0xf3000000 + NEPONSET_CPLD_BASE)
-
-#define _IRR 0x10000024 /* Interrupt Reason Register */
-#define _AUD_CTL 0x100000c0 /* Audio controls (RW) */
-#define _MDM_CTL_0 0x100000b0 /* Modem control 0 (RW) */
-#define _MDM_CTL_1 0x100000b4 /* Modem control 1 (RW) */
-#define _NCR_0 0x100000a0 /* Control Register (RW) */
-#define _KP_X_OUT 0x10000090 /* Keypad row write (RW) */
-#define _KP_Y_IN 0x10000080 /* Keypad column read (RO) */
-#define _SWPK 0x10000020 /* Switch pack (RO) */
-#define _WHOAMI 0x10000000 /* System ID Register (RO) */
-
-#define _LEDS 0x10000010 /* LEDs [31:0] (WO) */
-
-#define IRR (*((volatile u_char *) Nep_p2v(_IRR)))
-#define AUD_CTL (*((volatile u_char *) Nep_p2v(_AUD_CTL)))
-#define MDM_CTL_0 (*((volatile u_char *) Nep_p2v(_MDM_CTL_0)))
-#define MDM_CTL_1 (*((volatile u_char *) Nep_p2v(_MDM_CTL_1)))
-#define NCR_0 (*((volatile u_char *) Nep_p2v(_NCR_0)))
-#define KP_X_OUT (*((volatile u_char *) Nep_p2v(_KP_X_OUT)))
-#define KP_Y_IN (*((volatile u_char *) Nep_p2v(_KP_Y_IN)))
-#define SWPK (*((volatile u_char *) Nep_p2v(_SWPK)))
-#define WHOAMI (*((volatile u_char *) Nep_p2v(_WHOAMI)))
-
-#define LEDS (*((volatile Word *) Nep_p2v(_LEDS)))
-
-#define IRR_ETHERNET (1<<0)
-#define IRR_USAR (1<<1)
-#define IRR_SA1111 (1<<2)
-
-#define AUD_SEL_1341 (1<<0)
-#define AUD_MUTE_1341 (1<<1)
-
-#define MDM_CTL0_RTS1 (1 << 0)
-#define MDM_CTL0_DTR1 (1 << 1)
-#define MDM_CTL0_RTS2 (1 << 2)
-#define MDM_CTL0_DTR2 (1 << 3)
-
-#define MDM_CTL1_CTS1 (1 << 0)
-#define MDM_CTL1_DSR1 (1 << 1)
-#define MDM_CTL1_DCD1 (1 << 2)
-#define MDM_CTL1_CTS2 (1 << 3)
-#define MDM_CTL1_DSR2 (1 << 4)
-#define MDM_CTL1_DCD2 (1 << 5)
-
#define NCR_GP01_OFF (1<<0)
#define NCR_TP_PWR_EN (1<<1)
#define NCR_MS_PWR_EN (1<<2)
@@ -71,4 +23,8 @@
#define NCR_A0VPP (1<<5)
#define NCR_A1VPP (1<<6)
+void neponset_ncr_frob(unsigned int, unsigned int);
+#define neponset_ncr_set(v) neponset_ncr_frob(0, v)
+#define neponset_ncr_clear(v) neponset_ncr_frob(v, 0)
+
#endif
diff --git a/arch/arm/mach-sa1100/include/mach/shannon.h b/arch/arm/mach-sa1100/include/mach/shannon.h
index 019f857a793..fff39e02b49 100644
--- a/arch/arm/mach-sa1100/include/mach/shannon.h
+++ b/arch/arm/mach-sa1100/include/mach/shannon.h
@@ -21,7 +21,7 @@
#define SHANNON_GPIO_U3_RTS GPIO_GPIO (19) /* ?? */
#define SHANNON_GPIO_U3_CTS GPIO_GPIO (20) /* ?? */
#define SHANNON_GPIO_SENSE_12V GPIO_GPIO (21) /* Input, 12v flash unprotect detected */
-#define SHANNON_GPIO_DISP_EN GPIO_GPIO (22) /* out */
+#define SHANNON_GPIO_DISP_EN 22 /* out */
/* XXX GPIO 23 unaccounted for */
#define SHANNON_GPIO_EJECT_0 24 /* in */
#define SHANNON_GPIO_EJECT_1 25 /* in */
diff --git a/arch/arm/mach-sa1100/irq.c b/arch/arm/mach-sa1100/irq.c
index dfbf824a69f..516ccc25d7f 100644
--- a/arch/arm/mach-sa1100/irq.c
+++ b/arch/arm/mach-sa1100/irq.c
@@ -17,6 +17,7 @@
#include <linux/syscore_ops.h>
#include <mach/hardware.h>
+#include <mach/irqs.h>
#include <asm/mach/irq.h>
#include "generic.h"
@@ -221,11 +222,8 @@ static struct irq_chip sa1100_normal_chip = {
.irq_set_wake = sa1100_set_wake,
};
-static struct resource irq_resource = {
- .name = "irqs",
- .start = 0x90050000,
- .end = 0x9005ffff,
-};
+static struct resource irq_resource =
+ DEFINE_RES_MEM_NAMED(0x90050000, SZ_64K, "irqs");
static struct sa1100irq_state {
unsigned int saved;
diff --git a/arch/arm/mach-sa1100/jornada720.c b/arch/arm/mach-sa1100/jornada720.c
index ee121d6f048..ca7a7e83472 100644
--- a/arch/arm/mach-sa1100/jornada720.c
+++ b/arch/arm/mach-sa1100/jornada720.c
@@ -23,9 +23,7 @@
#include <linux/mtd/partitions.h>
#include <video/s1d13xxxfb.h>
-#include <mach/hardware.h>
#include <asm/hardware/sa1111.h>
-#include <asm/irq.h>
#include <asm/page.h>
#include <asm/mach-types.h>
#include <asm/setup.h>
@@ -34,6 +32,9 @@
#include <asm/mach/map.h>
#include <asm/mach/serial_sa1100.h>
+#include <mach/hardware.h>
+#include <mach/irqs.h>
+
#include "generic.h"
/*
@@ -46,7 +47,7 @@
/* memory space (line 52 of HP's doc) */
#define SA1111REGSTART 0x40000000
-#define SA1111REGLEN 0x00001fff
+#define SA1111REGLEN 0x00002000
#define EPSONREGSTART 0x48000000
#define EPSONREGLEN 0x00100000
#define EPSONFBSTART 0x48200000
@@ -174,16 +175,8 @@ static struct s1d13xxxfb_pdata s1d13xxxfb_data = {
};
static struct resource s1d13xxxfb_resources[] = {
- [0] = {
- .start = EPSONFBSTART,
- .end = EPSONFBSTART + EPSONFBLEN,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = EPSONREGSTART,
- .end = EPSONREGSTART + EPSONREGLEN,
- .flags = IORESOURCE_MEM,
- }
+ [0] = DEFINE_RES_MEM(EPSONFBSTART, EPSONFBLEN),
+ [1] = DEFINE_RES_MEM(EPSONREGSTART, EPSONREGLEN),
};
static struct platform_device s1d13xxxfb_device = {
@@ -197,20 +190,12 @@ static struct platform_device s1d13xxxfb_device = {
};
static struct resource sa1111_resources[] = {
- [0] = {
- .start = SA1111REGSTART,
- .end = SA1111REGSTART + SA1111REGLEN,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_GPIO1,
- .end = IRQ_GPIO1,
- .flags = IORESOURCE_IRQ,
- },
+ [0] = DEFINE_RES_MEM(SA1111REGSTART, SA1111REGLEN),
+ [1] = DEFINE_RES_IRQ(IRQ_GPIO1),
};
static struct sa1111_platform_data sa1111_info = {
- .irq_base = IRQ_BOARD_END,
+ .disable_devs = SA1111_DEVID_PS2_MSE,
};
static u64 sa1111_dmamask = 0xffffffffUL;
@@ -284,11 +269,6 @@ static struct map_desc jornada720_io_desc[] __initdata = {
.pfn = __phys_to_pfn(EPSONFBSTART),
.length = EPSONFBLEN,
.type = MT_DEVICE
- }, { /* SA-1111 */
- .virtual = 0xf4000000,
- .pfn = __phys_to_pfn(SA1111REGSTART),
- .length = SA1111REGLEN,
- .type = MT_DEVICE
}
};
@@ -352,11 +332,8 @@ static struct flash_platform_data jornada720_flash_data = {
.nr_parts = ARRAY_SIZE(jornada720_partitions),
};
-static struct resource jornada720_flash_resource = {
- .start = SA1100_CS0_PHYS,
- .end = SA1100_CS0_PHYS + SZ_32M - 1,
- .flags = IORESOURCE_MEM,
-};
+static struct resource jornada720_flash_resource =
+ DEFINE_RES_MEM(SA1100_CS0_PHYS, SZ_32M);
static void __init jornada720_mach_init(void)
{
@@ -367,6 +344,7 @@ MACHINE_START(JORNADA720, "HP Jornada 720")
/* Maintainer: Kristoffer Ericson <Kristoffer.Ericson@gmail.com> */
.atag_offset = 0x100,
.map_io = jornada720_map_io,
+ .nr_irqs = SA1100_NR_IRQS,
.init_irq = sa1100_init_irq,
.timer = &sa1100_timer,
.init_machine = jornada720_mach_init,
diff --git a/arch/arm/mach-sa1100/lart.c b/arch/arm/mach-sa1100/lart.c
index af4e2761f3d..eb6534e0b0d 100644
--- a/arch/arm/mach-sa1100/lart.c
+++ b/arch/arm/mach-sa1100/lart.c
@@ -6,6 +6,8 @@
#include <linux/kernel.h>
#include <linux/tty.h>
+#include <video/sa1100fb.h>
+
#include <mach/hardware.h>
#include <asm/setup.h>
#include <asm/mach-types.h>
@@ -15,6 +17,7 @@
#include <asm/mach/map.h>
#include <asm/mach/serial_sa1100.h>
#include <mach/mcp.h>
+#include <mach/irqs.h>
#include "generic.h"
@@ -26,8 +29,86 @@ static struct mcp_plat_data lart_mcp_data = {
.sclk_rate = 11981000,
};
+#ifdef LART_GREY_LCD
+static struct sa1100fb_mach_info lart_grey_info = {
+ .pixclock = 150000, .bpp = 4,
+ .xres = 320, .yres = 240,
+
+ .hsync_len = 1, .vsync_len = 1,
+ .left_margin = 4, .upper_margin = 0,
+ .right_margin = 2, .lower_margin = 0,
+
+ .cmap_greyscale = 1,
+ .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+
+ .lccr0 = LCCR0_Mono | LCCR0_Sngl | LCCR0_Pas | LCCR0_4PixMono,
+ .lccr3 = LCCR3_OutEnH | LCCR3_PixRsEdg | LCCR3_ACBsDiv(512),
+};
+#endif
+#ifdef LART_COLOR_LCD
+static struct sa1100fb_mach_info lart_color_info = {
+ .pixclock = 150000, .bpp = 16,
+ .xres = 320, .yres = 240,
+
+ .hsync_len = 2, .vsync_len = 3,
+ .left_margin = 69, .upper_margin = 14,
+ .right_margin = 8, .lower_margin = 4,
+
+ .lccr0 = LCCR0_Color | LCCR0_Sngl | LCCR0_Act,
+ .lccr3 = LCCR3_OutEnH | LCCR3_PixFlEdg | LCCR3_ACBsDiv(512),
+};
+#endif
+#ifdef LART_VIDEO_OUT
+static struct sa1100fb_mach_info lart_video_info = {
+ .pixclock = 39721, .bpp = 16,
+ .xres = 640, .yres = 480,
+
+ .hsync_len = 95, .vsync_len = 2,
+ .left_margin = 40, .upper_margin = 32,
+ .right_margin = 24, .lower_margin = 11,
+
+ .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+
+ .lccr0 = LCCR0_Color | LCCR0_Sngl | LCCR0_Act,
+ .lccr3 = LCCR3_OutEnL | LCCR3_PixFlEdg | LCCR3_ACBsDiv(512),
+};
+#endif
+
+#ifdef LART_KIT01_LCD
+static struct sa1100fb_mach_info lart_kit01_info = {
+ .pixclock = 63291, .bpp = 16,
+ .xres = 640, .yres = 480,
+
+ .hsync_len = 64, .vsync_len = 3,
+ .left_margin = 122, .upper_margin = 45,
+ .right_margin = 10, .lower_margin = 10,
+
+ .lccr0 = LCCR0_Color | LCCR0_Sngl | LCCR0_Act,
+ .lccr3 = LCCR3_OutEnH | LCCR3_PixFlEdg
+};
+#endif
+
static void __init lart_init(void)
{
+ struct sa1100fb_mach_info *inf = NULL;
+
+#ifdef LART_GREY_LCD
+ inf = &lart_grey_info;
+#endif
+#ifdef LART_COLOR_LCD
+ inf = &lart_color_info;
+#endif
+#ifdef LART_VIDEO_OUT
+ inf = &lart_video_info;
+#endif
+#ifdef LART_KIT01_LCD
+ inf = &lart_kit01_info;
+#endif
+
+ if (inf)
+ sa11x0_register_lcd(inf);
+
+ sa11x0_ppc_configure_mcp();
sa11x0_register_mcp(&lart_mcp_data);
}
@@ -63,6 +144,7 @@ static void __init lart_map_io(void)
MACHINE_START(LART, "LART")
.atag_offset = 0x100,
.map_io = lart_map_io,
+ .nr_irqs = SA1100_NR_IRQS,
.init_irq = sa1100_init_irq,
.init_machine = lart_init,
.timer = &sa1100_timer,
diff --git a/arch/arm/mach-sa1100/nanoengine.c b/arch/arm/mach-sa1100/nanoengine.c
index 85f6ee67222..8f6446b9f02 100644
--- a/arch/arm/mach-sa1100/nanoengine.c
+++ b/arch/arm/mach-sa1100/nanoengine.c
@@ -28,6 +28,7 @@
#include <mach/hardware.h>
#include <mach/nanoengine.h>
+#include <mach/irqs.h>
#include "generic.h"
@@ -58,15 +59,8 @@ static struct flash_platform_data nanoengine_flash_data = {
};
static struct resource nanoengine_flash_resources[] = {
- {
- .start = SA1100_CS0_PHYS,
- .end = SA1100_CS0_PHYS + SZ_32M - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .start = SA1100_CS1_PHYS,
- .end = SA1100_CS1_PHYS + SZ_32M - 1,
- .flags = IORESOURCE_MEM,
- }
+ DEFINE_RES_MEM(SA1100_CS0_PHYS, SZ_32M),
+ DEFINE_RES_MEM(SA1100_CS1_PHYS, SZ_32M),
};
static struct map_desc nanoengine_io_desc[] __initdata = {
@@ -114,6 +108,7 @@ static void __init nanoengine_init(void)
MACHINE_START(NANOENGINE, "BSE nanoEngine")
.atag_offset = 0x100,
.map_io = nanoengine_map_io,
+ .nr_irqs = SA1100_NR_IRQS,
.init_irq = sa1100_init_irq,
.timer = &sa1100_timer,
.init_machine = nanoengine_init,
diff --git a/arch/arm/mach-sa1100/neponset.c b/arch/arm/mach-sa1100/neponset.c
index b4fa53a1427..6c58f01b358 100644
--- a/arch/arm/mach-sa1100/neponset.c
+++ b/arch/arm/mach-sa1100/neponset.c
@@ -1,89 +1,104 @@
/*
* linux/arch/arm/mach-sa1100/neponset.c
- *
*/
-#include <linux/kernel.h>
+#include <linux/err.h>
#include <linux/init.h>
-#include <linux/tty.h>
#include <linux/ioport.h>
-#include <linux/serial_core.h>
+#include <linux/irq.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
#include <linux/platform_device.h>
+#include <linux/pm.h>
+#include <linux/serial_core.h>
+#include <linux/slab.h>
-#include <mach/hardware.h>
#include <asm/mach-types.h>
-#include <asm/irq.h>
#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
#include <asm/mach/serial_sa1100.h>
-#include <mach/assabet.h>
-#include <mach/neponset.h>
#include <asm/hardware/sa1111.h>
#include <asm/sizes.h>
-/*
- * Install handler for Neponset IRQ. Note that we have to loop here
- * since the ETHERNET and USAR IRQs are level based, and we need to
- * ensure that the IRQ signal is deasserted before returning. This
- * is rather unfortunate.
- */
-static void
-neponset_irq_handler(unsigned int irq, struct irq_desc *desc)
-{
- unsigned int irr;
-
- while (1) {
- /*
- * Acknowledge the parent IRQ.
- */
- desc->irq_data.chip->irq_ack(&desc->irq_data);
-
- /*
- * Read the interrupt reason register. Let's have all
- * active IRQ bits high. Note: there is a typo in the
- * Neponset user's guide for the SA1111 IRR level.
- */
- irr = IRR ^ (IRR_ETHERNET | IRR_USAR);
-
- if ((irr & (IRR_ETHERNET | IRR_USAR | IRR_SA1111)) == 0)
- break;
-
- /*
- * Since there is no individual mask, we have to
- * mask the parent IRQ. This is safe, since we'll
- * recheck the register for any pending IRQs.
- */
- if (irr & (IRR_ETHERNET | IRR_USAR)) {
- desc->irq_data.chip->irq_mask(&desc->irq_data);
-
- /*
- * Ack the interrupt now to prevent re-entering
- * this neponset handler. Again, this is safe
- * since we'll check the IRR register prior to
- * leaving.
- */
- desc->irq_data.chip->irq_ack(&desc->irq_data);
+#include <mach/hardware.h>
+#include <mach/assabet.h>
+#include <mach/neponset.h>
+#include <mach/irqs.h>
+
+#define NEP_IRQ_SMC91X 0
+#define NEP_IRQ_USAR 1
+#define NEP_IRQ_SA1111 2
+#define NEP_IRQ_NR 3
+
+#define WHOAMI 0x00
+#define LEDS 0x10
+#define SWPK 0x20
+#define IRR 0x24
+#define KP_Y_IN 0x80
+#define KP_X_OUT 0x90
+#define NCR_0 0xa0
+#define MDM_CTL_0 0xb0
+#define MDM_CTL_1 0xb4
+#define AUD_CTL 0xc0
+
+#define IRR_ETHERNET (1 << 0)
+#define IRR_USAR (1 << 1)
+#define IRR_SA1111 (1 << 2)
+
+#define MDM_CTL0_RTS1 (1 << 0)
+#define MDM_CTL0_DTR1 (1 << 1)
+#define MDM_CTL0_RTS2 (1 << 2)
+#define MDM_CTL0_DTR2 (1 << 3)
+
+#define MDM_CTL1_CTS1 (1 << 0)
+#define MDM_CTL1_DSR1 (1 << 1)
+#define MDM_CTL1_DCD1 (1 << 2)
+#define MDM_CTL1_CTS2 (1 << 3)
+#define MDM_CTL1_DSR2 (1 << 4)
+#define MDM_CTL1_DCD2 (1 << 5)
+
+#define AUD_SEL_1341 (1 << 0)
+#define AUD_MUTE_1341 (1 << 1)
- if (irr & IRR_ETHERNET) {
- generic_handle_irq(IRQ_NEPONSET_SMC9196);
- }
+extern void sa1110_mb_disable(void);
- if (irr & IRR_USAR) {
- generic_handle_irq(IRQ_NEPONSET_USAR);
- }
+struct neponset_drvdata {
+ void __iomem *base;
+ struct platform_device *sa1111;
+ struct platform_device *smc91x;
+ unsigned irq_base;
+#ifdef CONFIG_PM_SLEEP
+ u32 ncr0;
+ u32 mdm_ctl_0;
+#endif
+};
- desc->irq_data.chip->irq_unmask(&desc->irq_data);
- }
+static void __iomem *nep_base;
- if (irr & IRR_SA1111) {
- generic_handle_irq(IRQ_NEPONSET_SA1111);
- }
+void neponset_ncr_frob(unsigned int mask, unsigned int val)
+{
+ void __iomem *base = nep_base;
+
+ if (base) {
+ unsigned long flags;
+ unsigned v;
+
+ local_irq_save(flags);
+ v = readb_relaxed(base + NCR_0);
+ writeb_relaxed((v & ~mask) | val, base + NCR_0);
+ local_irq_restore(flags);
+ } else {
+ WARN(1, "nep_base unset\n");
}
}
static void neponset_set_mctrl(struct uart_port *port, u_int mctrl)
{
- u_int mdm_ctl0 = MDM_CTL_0;
+ void __iomem *base = nep_base;
+ u_int mdm_ctl0;
+ if (!base)
+ return;
+
+ mdm_ctl0 = readb_relaxed(base + MDM_CTL_0);
if (port->mapbase == _Ser1UTCR0) {
if (mctrl & TIOCM_RTS)
mdm_ctl0 &= ~MDM_CTL0_RTS2;
@@ -106,14 +121,19 @@ static void neponset_set_mctrl(struct uart_port *port, u_int mctrl)
mdm_ctl0 |= MDM_CTL0_DTR1;
}
- MDM_CTL_0 = mdm_ctl0;
+ writeb_relaxed(mdm_ctl0, base + MDM_CTL_0);
}
static u_int neponset_get_mctrl(struct uart_port *port)
{
+ void __iomem *base = nep_base;
u_int ret = TIOCM_CD | TIOCM_CTS | TIOCM_DSR;
- u_int mdm_ctl1 = MDM_CTL_1;
+ u_int mdm_ctl1;
+
+ if (!base)
+ return ret;
+ mdm_ctl1 = readb_relaxed(base + MDM_CTL_1);
if (port->mapbase == _Ser1UTCR0) {
if (mdm_ctl1 & MDM_CTL1_DCD2)
ret &= ~TIOCM_CD;
@@ -138,209 +158,278 @@ static struct sa1100_port_fns neponset_port_fns __devinitdata = {
.get_mctrl = neponset_get_mctrl,
};
-static int __devinit neponset_probe(struct platform_device *dev)
+/*
+ * Install handler for Neponset IRQ. Note that we have to loop here
+ * since the ETHERNET and USAR IRQs are level based, and we need to
+ * ensure that the IRQ signal is deasserted before returning. This
+ * is rather unfortunate.
+ */
+static void neponset_irq_handler(unsigned int irq, struct irq_desc *desc)
{
- sa1100_register_uart_fns(&neponset_port_fns);
+ struct neponset_drvdata *d = irq_desc_get_handler_data(desc);
+ unsigned int irr;
- /*
- * Install handler for GPIO25.
- */
- irq_set_irq_type(IRQ_GPIO25, IRQ_TYPE_EDGE_RISING);
- irq_set_chained_handler(IRQ_GPIO25, neponset_irq_handler);
+ while (1) {
+ /*
+ * Acknowledge the parent IRQ.
+ */
+ desc->irq_data.chip->irq_ack(&desc->irq_data);
- /*
- * We would set IRQ_GPIO25 to be a wake-up IRQ, but
- * unfortunately something on the Neponset activates
- * this IRQ on sleep (ethernet?)
- */
-#if 0
- enable_irq_wake(IRQ_GPIO25);
-#endif
+ /*
+ * Read the interrupt reason register. Let's have all
+ * active IRQ bits high. Note: there is a typo in the
+ * Neponset user's guide for the SA1111 IRR level.
+ */
+ irr = readb_relaxed(d->base + IRR);
+ irr ^= IRR_ETHERNET | IRR_USAR;
- /*
- * Setup other Neponset IRQs. SA1111 will be done by the
- * generic SA1111 code.
- */
- irq_set_handler(IRQ_NEPONSET_SMC9196, handle_simple_irq);
- set_irq_flags(IRQ_NEPONSET_SMC9196, IRQF_VALID | IRQF_PROBE);
- irq_set_handler(IRQ_NEPONSET_USAR, handle_simple_irq);
- set_irq_flags(IRQ_NEPONSET_USAR, IRQF_VALID | IRQF_PROBE);
+ if ((irr & (IRR_ETHERNET | IRR_USAR | IRR_SA1111)) == 0)
+ break;
- /*
- * Disable GPIO 0/1 drivers so the buttons work on the module.
- */
- NCR_0 = NCR_GP01_OFF;
+ /*
+ * Since there is no individual mask, we have to
+ * mask the parent IRQ. This is safe, since we'll
+ * recheck the register for any pending IRQs.
+ */
+ if (irr & (IRR_ETHERNET | IRR_USAR)) {
+ desc->irq_data.chip->irq_mask(&desc->irq_data);
- return 0;
-}
+ /*
+ * Ack the interrupt now to prevent re-entering
+ * this neponset handler. Again, this is safe
+ * since we'll check the IRR register prior to
+ * leaving.
+ */
+ desc->irq_data.chip->irq_ack(&desc->irq_data);
-#ifdef CONFIG_PM
+ if (irr & IRR_ETHERNET)
+ generic_handle_irq(d->irq_base + NEP_IRQ_SMC91X);
-/*
- * LDM power management.
- */
-static unsigned int neponset_saved_state;
+ if (irr & IRR_USAR)
+ generic_handle_irq(d->irq_base + NEP_IRQ_USAR);
-static int neponset_suspend(struct platform_device *dev, pm_message_t state)
-{
- /*
- * Save state.
- */
- neponset_saved_state = NCR_0;
+ desc->irq_data.chip->irq_unmask(&desc->irq_data);
+ }
- return 0;
+ if (irr & IRR_SA1111)
+ generic_handle_irq(d->irq_base + NEP_IRQ_SA1111);
+ }
}
-static int neponset_resume(struct platform_device *dev)
+/* Yes, we really do not have any kind of masking or unmasking */
+static void nochip_noop(struct irq_data *irq)
{
- NCR_0 = neponset_saved_state;
-
- return 0;
}
-#else
-#define neponset_suspend NULL
-#define neponset_resume NULL
-#endif
-
-static struct platform_driver neponset_device_driver = {
- .probe = neponset_probe,
- .suspend = neponset_suspend,
- .resume = neponset_resume,
- .driver = {
- .name = "neponset",
- },
-};
-
-static struct resource neponset_resources[] = {
- [0] = {
- .start = 0x10000000,
- .end = 0x17ffffff,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct platform_device neponset_device = {
- .name = "neponset",
- .id = 0,
- .num_resources = ARRAY_SIZE(neponset_resources),
- .resource = neponset_resources,
-};
-
-static struct resource sa1111_resources[] = {
- [0] = {
- .start = 0x40000000,
- .end = 0x40001fff,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_NEPONSET_SA1111,
- .end = IRQ_NEPONSET_SA1111,
- .flags = IORESOURCE_IRQ,
- },
+static struct irq_chip nochip = {
+ .name = "neponset",
+ .irq_ack = nochip_noop,
+ .irq_mask = nochip_noop,
+ .irq_unmask = nochip_noop,
};
static struct sa1111_platform_data sa1111_info = {
- .irq_base = IRQ_BOARD_END,
+ .disable_devs = SA1111_DEVID_PS2_MSE,
};
-static u64 sa1111_dmamask = 0xffffffffUL;
+static int __devinit neponset_probe(struct platform_device *dev)
+{
+ struct neponset_drvdata *d;
+ struct resource *nep_res, *sa1111_res, *smc91x_res;
+ struct resource sa1111_resources[] = {
+ DEFINE_RES_MEM(0x40000000, SZ_8K),
+ { .flags = IORESOURCE_IRQ },
+ };
+ struct platform_device_info sa1111_devinfo = {
+ .parent = &dev->dev,
+ .name = "sa1111",
+ .id = 0,
+ .res = sa1111_resources,
+ .num_res = ARRAY_SIZE(sa1111_resources),
+ .data = &sa1111_info,
+ .size_data = sizeof(sa1111_info),
+ .dma_mask = 0xffffffffUL,
+ };
+ struct resource smc91x_resources[] = {
+ DEFINE_RES_MEM_NAMED(SA1100_CS3_PHYS,
+ 0x02000000, "smc91x-regs"),
+ DEFINE_RES_MEM_NAMED(SA1100_CS3_PHYS + 0x02000000,
+ 0x02000000, "smc91x-attrib"),
+ { .flags = IORESOURCE_IRQ },
+ };
+ struct platform_device_info smc91x_devinfo = {
+ .parent = &dev->dev,
+ .name = "smc91x",
+ .id = 0,
+ .res = smc91x_resources,
+ .num_res = ARRAY_SIZE(smc91x_resources),
+ };
+ int ret, irq;
+
+ if (nep_base)
+ return -EBUSY;
+
+ irq = ret = platform_get_irq(dev, 0);
+ if (ret < 0)
+ goto err_alloc;
+
+ nep_res = platform_get_resource(dev, IORESOURCE_MEM, 0);
+ smc91x_res = platform_get_resource(dev, IORESOURCE_MEM, 1);
+ sa1111_res = platform_get_resource(dev, IORESOURCE_MEM, 2);
+ if (!nep_res || !smc91x_res || !sa1111_res) {
+ ret = -ENXIO;
+ goto err_alloc;
+ }
-static struct platform_device sa1111_device = {
- .name = "sa1111",
- .id = 0,
- .dev = {
- .dma_mask = &sa1111_dmamask,
- .coherent_dma_mask = 0xffffffff,
- .platform_data = &sa1111_info,
- },
- .num_resources = ARRAY_SIZE(sa1111_resources),
- .resource = sa1111_resources,
-};
+ d = kzalloc(sizeof(*d), GFP_KERNEL);
+ if (!d) {
+ ret = -ENOMEM;
+ goto err_alloc;
+ }
-static struct resource smc91x_resources[] = {
- [0] = {
- .name = "smc91x-regs",
- .start = SA1100_CS3_PHYS,
- .end = SA1100_CS3_PHYS + 0x01ffffff,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_NEPONSET_SMC9196,
- .end = IRQ_NEPONSET_SMC9196,
- .flags = IORESOURCE_IRQ,
- },
- [2] = {
- .name = "smc91x-attrib",
- .start = SA1100_CS3_PHYS + 0x02000000,
- .end = SA1100_CS3_PHYS + 0x03ffffff,
- .flags = IORESOURCE_MEM,
- },
-};
+ d->base = ioremap(nep_res->start, SZ_4K);
+ if (!d->base) {
+ ret = -ENOMEM;
+ goto err_ioremap;
+ }
-static struct platform_device smc91x_device = {
- .name = "smc91x",
- .id = 0,
- .num_resources = ARRAY_SIZE(smc91x_resources),
- .resource = smc91x_resources,
-};
+ if (readb_relaxed(d->base + WHOAMI) != 0x11) {
+ dev_warn(&dev->dev, "Neponset board detected, but wrong ID: %02x\n",
+ readb_relaxed(d->base + WHOAMI));
+ ret = -ENODEV;
+ goto err_id;
+ }
-static struct platform_device *devices[] __initdata = {
- &neponset_device,
- &sa1111_device,
- &smc91x_device,
-};
+ ret = irq_alloc_descs(-1, IRQ_BOARD_START, NEP_IRQ_NR, -1);
+ if (ret <= 0) {
+ dev_err(&dev->dev, "unable to allocate %u irqs: %d\n",
+ NEP_IRQ_NR, ret);
+ if (ret == 0)
+ ret = -ENOMEM;
+ goto err_irq_alloc;
+ }
-extern void sa1110_mb_disable(void);
+ d->irq_base = ret;
-static int __init neponset_init(void)
-{
- platform_driver_register(&neponset_device_driver);
+ irq_set_chip_and_handler(d->irq_base + NEP_IRQ_SMC91X, &nochip,
+ handle_simple_irq);
+ set_irq_flags(d->irq_base + NEP_IRQ_SMC91X, IRQF_VALID | IRQF_PROBE);
+ irq_set_chip_and_handler(d->irq_base + NEP_IRQ_USAR, &nochip,
+ handle_simple_irq);
+ set_irq_flags(d->irq_base + NEP_IRQ_USAR, IRQF_VALID | IRQF_PROBE);
+ irq_set_chip(d->irq_base + NEP_IRQ_SA1111, &nochip);
- /*
- * The Neponset is only present on the Assabet machine type.
- */
- if (!machine_is_assabet())
- return -ENODEV;
+ irq_set_irq_type(irq, IRQ_TYPE_EDGE_RISING);
+ irq_set_handler_data(irq, d);
+ irq_set_chained_handler(irq, neponset_irq_handler);
/*
- * Ensure that the memory bus request/grant signals are setup,
- * and the grant is held in its inactive state, whether or not
- * we actually have a Neponset attached.
+ * We would set IRQ_GPIO25 to be a wake-up IRQ, but unfortunately
+ * something on the Neponset activates this IRQ on sleep (eth?)
*/
+#if 0
+ enable_irq_wake(irq);
+#endif
+
+ dev_info(&dev->dev, "Neponset daughter board, providing IRQ%u-%u\n",
+ d->irq_base, d->irq_base + NEP_IRQ_NR - 1);
+ nep_base = d->base;
+
+ sa1100_register_uart_fns(&neponset_port_fns);
+
+ /* Ensure that the memory bus request/grant signals are setup */
sa1110_mb_disable();
- if (!machine_has_neponset()) {
- printk(KERN_DEBUG "Neponset expansion board not present\n");
- return -ENODEV;
- }
+ /* Disable GPIO 0/1 drivers so the buttons work on the Assabet */
+ writeb_relaxed(NCR_GP01_OFF, d->base + NCR_0);
- if (WHOAMI != 0x11) {
- printk(KERN_WARNING "Neponset board detected, but "
- "wrong ID: %02x\n", WHOAMI);
- return -ENODEV;
- }
+ sa1111_resources[0].parent = sa1111_res;
+ sa1111_resources[1].start = d->irq_base + NEP_IRQ_SA1111;
+ sa1111_resources[1].end = d->irq_base + NEP_IRQ_SA1111;
+ d->sa1111 = platform_device_register_full(&sa1111_devinfo);
+
+ smc91x_resources[0].parent = smc91x_res;
+ smc91x_resources[1].parent = smc91x_res;
+ smc91x_resources[2].start = d->irq_base + NEP_IRQ_SMC91X;
+ smc91x_resources[2].end = d->irq_base + NEP_IRQ_SMC91X;
+ d->smc91x = platform_device_register_full(&smc91x_devinfo);
+
+ platform_set_drvdata(dev, d);
- return platform_add_devices(devices, ARRAY_SIZE(devices));
+ return 0;
+
+ err_irq_alloc:
+ err_id:
+ iounmap(d->base);
+ err_ioremap:
+ kfree(d);
+ err_alloc:
+ return ret;
}
-subsys_initcall(neponset_init);
+static int __devexit neponset_remove(struct platform_device *dev)
+{
+ struct neponset_drvdata *d = platform_get_drvdata(dev);
+ int irq = platform_get_irq(dev, 0);
+
+ if (!IS_ERR(d->sa1111))
+ platform_device_unregister(d->sa1111);
+ if (!IS_ERR(d->smc91x))
+ platform_device_unregister(d->smc91x);
+ irq_set_chained_handler(irq, NULL);
+ irq_free_descs(d->irq_base, NEP_IRQ_NR);
+ nep_base = NULL;
+ iounmap(d->base);
+ kfree(d);
-static struct map_desc neponset_io_desc[] __initdata = {
- { /* System Registers */
- .virtual = 0xf3000000,
- .pfn = __phys_to_pfn(0x10000000),
- .length = SZ_1M,
- .type = MT_DEVICE
- }, { /* SA-1111 */
- .virtual = 0xf4000000,
- .pfn = __phys_to_pfn(0x40000000),
- .length = SZ_1M,
- .type = MT_DEVICE
- }
+ return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int neponset_suspend(struct device *dev)
+{
+ struct neponset_drvdata *d = dev_get_drvdata(dev);
+
+ d->ncr0 = readb_relaxed(d->base + NCR_0);
+ d->mdm_ctl_0 = readb_relaxed(d->base + MDM_CTL_0);
+
+ return 0;
+}
+
+static int neponset_resume(struct device *dev)
+{
+ struct neponset_drvdata *d = dev_get_drvdata(dev);
+
+ writeb_relaxed(d->ncr0, d->base + NCR_0);
+ writeb_relaxed(d->mdm_ctl_0, d->base + MDM_CTL_0);
+
+ return 0;
+}
+
+static const struct dev_pm_ops neponset_pm_ops = {
+ .suspend_noirq = neponset_suspend,
+ .resume_noirq = neponset_resume,
+ .freeze_noirq = neponset_suspend,
+ .restore_noirq = neponset_resume,
+};
+#define PM_OPS &neponset_pm_ops
+#else
+#define PM_OPS NULL
+#endif
+
+static struct platform_driver neponset_device_driver = {
+ .probe = neponset_probe,
+ .remove = __devexit_p(neponset_remove),
+ .driver = {
+ .name = "neponset",
+ .owner = THIS_MODULE,
+ .pm = PM_OPS,
+ },
};
-void __init neponset_map_io(void)
+static int __init neponset_init(void)
{
- iotable_init(neponset_io_desc, ARRAY_SIZE(neponset_io_desc));
+ return platform_driver_register(&neponset_device_driver);
}
+
+subsys_initcall(neponset_init);
diff --git a/arch/arm/mach-sa1100/pci-nanoengine.c b/arch/arm/mach-sa1100/pci-nanoengine.c
index b466bca9c65..b49108b890a 100644
--- a/arch/arm/mach-sa1100/pci-nanoengine.c
+++ b/arch/arm/mach-sa1100/pci-nanoengine.c
@@ -135,12 +135,8 @@ struct pci_bus * __init pci_nanoengine_scan_bus(int nr, struct pci_sys_data *sys
&sys->resources);
}
-static struct resource pci_io_ports = {
- .name = "PCI IO",
- .start = 0x400,
- .end = 0x7FF,
- .flags = IORESOURCE_IO,
-};
+static struct resource pci_io_ports =
+ DEFINE_RES_IO_NAMED(0x400, 0x400, "PCI IO");
static struct resource pci_non_prefetchable_memory = {
.name = "PCI non-prefetchable",
diff --git a/arch/arm/mach-sa1100/pleb.c b/arch/arm/mach-sa1100/pleb.c
index 9307df05353..1602575a0d5 100644
--- a/arch/arm/mach-sa1100/pleb.c
+++ b/arch/arm/mach-sa1100/pleb.c
@@ -37,17 +37,9 @@
#define IRQ_GPIO_ETH0_IRQ IRQ_GPIO21
static struct resource smc91x_resources[] = {
- [0] = {
- .start = PLEB_ETH0_P,
- .end = PLEB_ETH0_P | 0x03ffffff,
- .flags = IORESOURCE_MEM,
- },
+ [0] = DEFINE_RES_MEM(PLEB_ETH0_P, 0x04000000),
#if 0 /* Autoprobe instead, to get rising/falling edge characteristic right */
- [1] = {
- .start = IRQ_GPIO_ETH0_IRQ,
- .end = IRQ_GPIO_ETH0_IRQ,
- .flags = IORESOURCE_IRQ,
- },
+ [1] = DEFINE_RES_IRQ(IRQ_GPIO_ETH0_IRQ),
#endif
};
@@ -70,16 +62,8 @@ static struct platform_device *devices[] __initdata = {
* the two SA1100 lowest chip select outputs.
*/
static struct resource pleb_flash_resources[] = {
- [0] = {
- .start = SA1100_CS0_PHYS,
- .end = SA1100_CS0_PHYS + SZ_8M - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = SA1100_CS1_PHYS,
- .end = SA1100_CS1_PHYS + SZ_8M - 1,
- .flags = IORESOURCE_MEM,
- }
+ [0] = DEFINE_RES_MEM(SA1100_CS0_PHYS, SZ_8M),
+ [1] = DEFINE_RES_MEM(SA1100_CS1_PHYS, SZ_8M),
};
@@ -147,6 +131,7 @@ static void __init pleb_map_io(void)
MACHINE_START(PLEB, "PLEB")
.map_io = pleb_map_io,
+ .nr_irqs = SA1100_NR_IRQS,
.init_irq = sa1100_init_irq,
.timer = &sa1100_timer,
.init_machine = pleb_init,
diff --git a/arch/arm/mach-sa1100/shannon.c b/arch/arm/mach-sa1100/shannon.c
index 318b2b766a0..ca8bf59b904 100644
--- a/arch/arm/mach-sa1100/shannon.c
+++ b/arch/arm/mach-sa1100/shannon.c
@@ -9,6 +9,8 @@
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
+#include <video/sa1100fb.h>
+
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/setup.h>
@@ -19,6 +21,7 @@
#include <asm/mach/serial_sa1100.h>
#include <mach/mcp.h>
#include <mach/shannon.h>
+#include <mach/irqs.h>
#include "generic.h"
@@ -46,19 +49,32 @@ static struct flash_platform_data shannon_flash_data = {
.nr_parts = ARRAY_SIZE(shannon_partitions),
};
-static struct resource shannon_flash_resource = {
- .start = SA1100_CS0_PHYS,
- .end = SA1100_CS0_PHYS + SZ_4M - 1,
- .flags = IORESOURCE_MEM,
-};
+static struct resource shannon_flash_resource =
+ DEFINE_RES_MEM(SA1100_CS0_PHYS, SZ_4M);
static struct mcp_plat_data shannon_mcp_data = {
.mccr0 = MCCR0_ADM,
.sclk_rate = 11981000,
};
+static struct sa1100fb_mach_info shannon_lcd_info = {
+ .pixclock = 152500, .bpp = 8,
+ .xres = 640, .yres = 480,
+
+ .hsync_len = 4, .vsync_len = 3,
+ .left_margin = 2, .upper_margin = 0,
+ .right_margin = 1, .lower_margin = 0,
+
+ .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+
+ .lccr0 = LCCR0_Color | LCCR0_Dual | LCCR0_Pas,
+ .lccr3 = LCCR3_ACBsDiv(512),
+};
+
static void __init shannon_init(void)
{
+ sa11x0_ppc_configure_mcp();
+ sa11x0_register_lcd(&shannon_lcd_info);
sa11x0_register_mtd(&shannon_flash_data, &shannon_flash_resource, 1);
sa11x0_register_mcp(&shannon_mcp_data);
}
@@ -84,6 +100,7 @@ static void __init shannon_map_io(void)
MACHINE_START(SHANNON, "Shannon (AKA: Tuxscreen)")
.atag_offset = 0x100,
.map_io = shannon_map_io,
+ .nr_irqs = SA1100_NR_IRQS,
.init_irq = sa1100_init_irq,
.timer = &sa1100_timer,
.init_machine = shannon_init,
diff --git a/arch/arm/mach-sa1100/simpad.c b/arch/arm/mach-sa1100/simpad.c
index e17c04d6e32..3efae03cb3d 100644
--- a/arch/arm/mach-sa1100/simpad.c
+++ b/arch/arm/mach-sa1100/simpad.c
@@ -7,15 +7,15 @@
#include <linux/kernel.h>
#include <linux/tty.h>
#include <linux/proc_fs.h>
-#include <linux/string.h>
+#include <linux/string.h>
#include <linux/pm.h>
#include <linux/platform_device.h>
+#include <linux/mfd/ucb1x00.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/io.h>
#include <linux/gpio.h>
-#include <asm/irq.h>
#include <mach/hardware.h>
#include <asm/setup.h>
@@ -26,6 +26,7 @@
#include <asm/mach/serial_sa1100.h>
#include <mach/mcp.h>
#include <mach/simpad.h>
+#include <mach/irqs.h>
#include <linux/serial_core.h>
#include <linux/ioport.h>
@@ -176,21 +177,18 @@ static struct flash_platform_data simpad_flash_data = {
static struct resource simpad_flash_resources [] = {
- {
- .start = SA1100_CS0_PHYS,
- .end = SA1100_CS0_PHYS + SZ_16M -1,
- .flags = IORESOURCE_MEM,
- }, {
- .start = SA1100_CS1_PHYS,
- .end = SA1100_CS1_PHYS + SZ_16M -1,
- .flags = IORESOURCE_MEM,
- }
+ DEFINE_RES_MEM(SA1100_CS0_PHYS, SZ_16M),
+ DEFINE_RES_MEM(SA1100_CS1_PHYS, SZ_16M),
+};
+
+static struct ucb1x00_plat_data simpad_ucb1x00_data = {
+ .gpio_base = SIMPAD_UCB1X00_GPIO_BASE,
};
static struct mcp_plat_data simpad_mcp_data = {
.mccr0 = MCCR0_ADM,
.sclk_rate = 11981000,
- .gpio_base = SIMPAD_UCB1X00_GPIO_BASE,
+ .codec_pdata = &simpad_ucb1x00_data,
};
@@ -376,6 +374,7 @@ static int __init simpad_init(void)
pm_power_off = simpad_power_off;
+ sa11x0_ppc_configure_mcp();
sa11x0_register_mtd(&simpad_flash_data, simpad_flash_resources,
ARRAY_SIZE(simpad_flash_resources));
sa11x0_register_mcp(&simpad_mcp_data);
@@ -394,6 +393,7 @@ MACHINE_START(SIMPAD, "Simpad")
/* Maintainer: Holger Freyther */
.atag_offset = 0x100,
.map_io = simpad_map_io,
+ .nr_irqs = SA1100_NR_IRQS,
.init_irq = sa1100_init_irq,
.timer = &sa1100_timer,
.restart = sa11x0_restart,
diff --git a/arch/arm/mach-sa1100/sleep.S b/arch/arm/mach-sa1100/sleep.S
index e8223315b44..30cc6721665 100644
--- a/arch/arm/mach-sa1100/sleep.S
+++ b/arch/arm/mach-sa1100/sleep.S
@@ -26,27 +26,36 @@
*
* Causes sa11x0 to enter sleep state
*
+ * Must be aligned to a cacheline.
*/
-
+ .balign 32
ENTRY(sa1100_finish_suspend)
@ disable clock switching
mcr p15, 0, r1, c15, c2, 2
- @ Adjust memory timing before lowering CPU clock
- @ Clock speed adjustment without changing memory timing makes
- @ CPU hang in some cases
- ldr r0, =MDREFR
- ldr r1, [r0]
- orr r1, r1, #MDREFR_K1DB2
- str r1, [r0]
+ ldr r6, =MDREFR
+ ldr r4, [r6]
+ orr r4, r4, #MDREFR_K1DB2
+ ldr r5, =PPCR
+
+ @ Pre-load __udelay into the I-cache
+ mov r0, #1
+ bl __udelay
+ mov r0, r0
+
+ @ The following must all exist in a single cache line to
+ @ avoid accessing memory until this sequence is complete,
+ @ otherwise we occasionally hang.
+
+ @ Adjust memory timing before lowering CPU clock
+ str r4, [r6]
@ delay 90us and set CPU PLL to lowest speed
@ fixes resume problem on high speed SA1110
mov r0, #90
bl __udelay
- ldr r0, =PPCR
mov r1, #0
- str r1, [r0]
+ str r1, [r5]
mov r0, #90
bl __udelay
@@ -85,12 +94,10 @@ ENTRY(sa1100_finish_suspend)
bic r5, r5, #FMsk(MSC_RT)
bic r5, r5, #FMsk(MSC_RT)<<16
- ldr r6, =MDREFR
-
ldr r7, [r6]
-bic r7, r7, #0x0000FF00
-bic r7, r7, #0x000000F0
-orr r8, r7, #MDREFR_SLFRSH
+ bic r7, r7, #0x0000FF00
+ bic r7, r7, #0x000000F0
+ orr r8, r7, #MDREFR_SLFRSH
ldr r9, =MDCNFG
ldr r10, [r9]
diff --git a/arch/arm/mach-sa1100/ssp.c b/arch/arm/mach-sa1100/ssp.c
index b20ff93b84a..e22fca9ad5e 100644
--- a/arch/arm/mach-sa1100/ssp.c
+++ b/arch/arm/mach-sa1100/ssp.c
@@ -19,8 +19,8 @@
#include <linux/init.h>
#include <linux/io.h>
-#include <asm/irq.h>
#include <mach/hardware.h>
+#include <mach/irqs.h>
#include <asm/hardware/ssp.h>
#define TIMEOUT 100000
diff --git a/arch/arm/mach-sa1100/time.c b/arch/arm/mach-sa1100/time.c
index 69e33535dee..6af26e8d55e 100644
--- a/arch/arm/mach-sa1100/time.c
+++ b/arch/arm/mach-sa1100/time.c
@@ -18,6 +18,7 @@
#include <asm/mach/time.h>
#include <asm/sched_clock.h>
#include <mach/hardware.h>
+#include <mach/irqs.h>
static u32 notrace sa1100_read_sched_clock(void)
{
diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig
index f1a274994bb..4a6c46dea8a 100644
--- a/drivers/dma/Kconfig
+++ b/drivers/dma/Kconfig
@@ -252,6 +252,15 @@ config EP93XX_DMA
help
Enable support for the Cirrus Logic EP93xx M2P/M2M DMA controller.
+config DMA_SA11X0
+ tristate "SA-11x0 DMA support"
+ depends on ARCH_SA1100
+ select DMA_ENGINE
+ help
+ Support the DMA engine found on Intel StrongARM SA-1100 and
+ SA-1110 SoCs. This DMA engine can only be used with on-chip
+ devices.
+
config DMA_ENGINE
bool
diff --git a/drivers/dma/Makefile b/drivers/dma/Makefile
index 009a222e828..86b795baba9 100644
--- a/drivers/dma/Makefile
+++ b/drivers/dma/Makefile
@@ -27,3 +27,4 @@ obj-$(CONFIG_PL330_DMA) += pl330.o
obj-$(CONFIG_PCH_DMA) += pch_dma.o
obj-$(CONFIG_AMBA_PL08X) += amba-pl08x.o
obj-$(CONFIG_EP93XX_DMA) += ep93xx_dma.o
+obj-$(CONFIG_DMA_SA11X0) += sa11x0-dma.o
diff --git a/drivers/dma/sa11x0-dma.c b/drivers/dma/sa11x0-dma.c
new file mode 100644
index 00000000000..16a6b48883c
--- /dev/null
+++ b/drivers/dma/sa11x0-dma.c
@@ -0,0 +1,1109 @@
+/*
+ * SA11x0 DMAengine support
+ *
+ * Copyright (C) 2012 Russell King
+ * Derived in part from arch/arm/mach-sa1100/dma.c,
+ * Copyright (C) 2000, 2001 by Nicolas Pitre
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/sched.h>
+#include <linux/device.h>
+#include <linux/dmaengine.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/sa11x0-dma.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+
+#define NR_PHY_CHAN 6
+#define DMA_ALIGN 3
+#define DMA_MAX_SIZE 0x1fff
+#define DMA_CHUNK_SIZE 0x1000
+
+#define DMA_DDAR 0x00
+#define DMA_DCSR_S 0x04
+#define DMA_DCSR_C 0x08
+#define DMA_DCSR_R 0x0c
+#define DMA_DBSA 0x10
+#define DMA_DBTA 0x14
+#define DMA_DBSB 0x18
+#define DMA_DBTB 0x1c
+#define DMA_SIZE 0x20
+
+#define DCSR_RUN (1 << 0)
+#define DCSR_IE (1 << 1)
+#define DCSR_ERROR (1 << 2)
+#define DCSR_DONEA (1 << 3)
+#define DCSR_STRTA (1 << 4)
+#define DCSR_DONEB (1 << 5)
+#define DCSR_STRTB (1 << 6)
+#define DCSR_BIU (1 << 7)
+
+#define DDAR_RW (1 << 0) /* 0 = W, 1 = R */
+#define DDAR_E (1 << 1) /* 0 = LE, 1 = BE */
+#define DDAR_BS (1 << 2) /* 0 = BS4, 1 = BS8 */
+#define DDAR_DW (1 << 3) /* 0 = 8b, 1 = 16b */
+#define DDAR_Ser0UDCTr (0x0 << 4)
+#define DDAR_Ser0UDCRc (0x1 << 4)
+#define DDAR_Ser1SDLCTr (0x2 << 4)
+#define DDAR_Ser1SDLCRc (0x3 << 4)
+#define DDAR_Ser1UARTTr (0x4 << 4)
+#define DDAR_Ser1UARTRc (0x5 << 4)
+#define DDAR_Ser2ICPTr (0x6 << 4)
+#define DDAR_Ser2ICPRc (0x7 << 4)
+#define DDAR_Ser3UARTTr (0x8 << 4)
+#define DDAR_Ser3UARTRc (0x9 << 4)
+#define DDAR_Ser4MCP0Tr (0xa << 4)
+#define DDAR_Ser4MCP0Rc (0xb << 4)
+#define DDAR_Ser4MCP1Tr (0xc << 4)
+#define DDAR_Ser4MCP1Rc (0xd << 4)
+#define DDAR_Ser4SSPTr (0xe << 4)
+#define DDAR_Ser4SSPRc (0xf << 4)
+
+struct sa11x0_dma_sg {
+ u32 addr;
+ u32 len;
+};
+
+struct sa11x0_dma_desc {
+ struct dma_async_tx_descriptor tx;
+ u32 ddar;
+ size_t size;
+
+ /* maybe protected by c->lock */
+ struct list_head node;
+ unsigned sglen;
+ struct sa11x0_dma_sg sg[0];
+};
+
+struct sa11x0_dma_phy;
+
+struct sa11x0_dma_chan {
+ struct dma_chan chan;
+ spinlock_t lock;
+ dma_cookie_t lc;
+
+ /* protected by c->lock */
+ struct sa11x0_dma_phy *phy;
+ enum dma_status status;
+ struct list_head desc_submitted;
+ struct list_head desc_issued;
+
+ /* protected by d->lock */
+ struct list_head node;
+
+ u32 ddar;
+ const char *name;
+};
+
+struct sa11x0_dma_phy {
+ void __iomem *base;
+ struct sa11x0_dma_dev *dev;
+ unsigned num;
+
+ struct sa11x0_dma_chan *vchan;
+
+ /* Protected by c->lock */
+ unsigned sg_load;
+ struct sa11x0_dma_desc *txd_load;
+ unsigned sg_done;
+ struct sa11x0_dma_desc *txd_done;
+#ifdef CONFIG_PM_SLEEP
+ u32 dbs[2];
+ u32 dbt[2];
+ u32 dcsr;
+#endif
+};
+
+struct sa11x0_dma_dev {
+ struct dma_device slave;
+ void __iomem *base;
+ spinlock_t lock;
+ struct tasklet_struct task;
+ struct list_head chan_pending;
+ struct list_head desc_complete;
+ struct sa11x0_dma_phy phy[NR_PHY_CHAN];
+};
+
+static struct sa11x0_dma_chan *to_sa11x0_dma_chan(struct dma_chan *chan)
+{
+ return container_of(chan, struct sa11x0_dma_chan, chan);
+}
+
+static struct sa11x0_dma_dev *to_sa11x0_dma(struct dma_device *dmadev)
+{
+ return container_of(dmadev, struct sa11x0_dma_dev, slave);
+}
+
+static struct sa11x0_dma_desc *to_sa11x0_dma_tx(struct dma_async_tx_descriptor *tx)
+{
+ return container_of(tx, struct sa11x0_dma_desc, tx);
+}
+
+static struct sa11x0_dma_desc *sa11x0_dma_next_desc(struct sa11x0_dma_chan *c)
+{
+ if (list_empty(&c->desc_issued))
+ return NULL;
+
+ return list_first_entry(&c->desc_issued, struct sa11x0_dma_desc, node);
+}
+
+static void sa11x0_dma_start_desc(struct sa11x0_dma_phy *p, struct sa11x0_dma_desc *txd)
+{
+ list_del(&txd->node);
+ p->txd_load = txd;
+ p->sg_load = 0;
+
+ dev_vdbg(p->dev->slave.dev, "pchan %u: txd %p[%x]: starting: DDAR:%x\n",
+ p->num, txd, txd->tx.cookie, txd->ddar);
+}
+
+static void noinline sa11x0_dma_start_sg(struct sa11x0_dma_phy *p,
+ struct sa11x0_dma_chan *c)
+{
+ struct sa11x0_dma_desc *txd = p->txd_load;
+ struct sa11x0_dma_sg *sg;
+ void __iomem *base = p->base;
+ unsigned dbsx, dbtx;
+ u32 dcsr;
+
+ if (!txd)
+ return;
+
+ dcsr = readl_relaxed(base + DMA_DCSR_R);
+
+ /* Don't try to load the next transfer if both buffers are started */
+ if ((dcsr & (DCSR_STRTA | DCSR_STRTB)) == (DCSR_STRTA | DCSR_STRTB))
+ return;
+
+ if (p->sg_load == txd->sglen) {
+ struct sa11x0_dma_desc *txn = sa11x0_dma_next_desc(c);
+
+ /*
+ * We have reached the end of the current descriptor.
+ * Peek at the next descriptor, and if compatible with
+ * the current, start processing it.
+ */
+ if (txn && txn->ddar == txd->ddar) {
+ txd = txn;
+ sa11x0_dma_start_desc(p, txn);
+ } else {
+ p->txd_load = NULL;
+ return;
+ }
+ }
+
+ sg = &txd->sg[p->sg_load++];
+
+ /* Select buffer to load according to channel status */
+ if (((dcsr & (DCSR_BIU | DCSR_STRTB)) == (DCSR_BIU | DCSR_STRTB)) ||
+ ((dcsr & (DCSR_BIU | DCSR_STRTA)) == 0)) {
+ dbsx = DMA_DBSA;
+ dbtx = DMA_DBTA;
+ dcsr = DCSR_STRTA | DCSR_IE | DCSR_RUN;
+ } else {
+ dbsx = DMA_DBSB;
+ dbtx = DMA_DBTB;
+ dcsr = DCSR_STRTB | DCSR_IE | DCSR_RUN;
+ }
+
+ writel_relaxed(sg->addr, base + dbsx);
+ writel_relaxed(sg->len, base + dbtx);
+ writel(dcsr, base + DMA_DCSR_S);
+
+ dev_dbg(p->dev->slave.dev, "pchan %u: load: DCSR:%02x DBS%c:%08x DBT%c:%08x\n",
+ p->num, dcsr,
+ 'A' + (dbsx == DMA_DBSB), sg->addr,
+ 'A' + (dbtx == DMA_DBTB), sg->len);
+}
+
+static void noinline sa11x0_dma_complete(struct sa11x0_dma_phy *p,
+ struct sa11x0_dma_chan *c)
+{
+ struct sa11x0_dma_desc *txd = p->txd_done;
+
+ if (++p->sg_done == txd->sglen) {
+ struct sa11x0_dma_dev *d = p->dev;
+
+ dev_vdbg(d->slave.dev, "pchan %u: txd %p[%x]: completed\n",
+ p->num, p->txd_done, p->txd_done->tx.cookie);
+
+ c->lc = txd->tx.cookie;
+
+ spin_lock(&d->lock);
+ list_add_tail(&txd->node, &d->desc_complete);
+ spin_unlock(&d->lock);
+
+ p->sg_done = 0;
+ p->txd_done = p->txd_load;
+
+ tasklet_schedule(&d->task);
+ }
+
+ sa11x0_dma_start_sg(p, c);
+}
+
+static irqreturn_t sa11x0_dma_irq(int irq, void *dev_id)
+{
+ struct sa11x0_dma_phy *p = dev_id;
+ struct sa11x0_dma_dev *d = p->dev;
+ struct sa11x0_dma_chan *c;
+ u32 dcsr;
+
+ dcsr = readl_relaxed(p->base + DMA_DCSR_R);
+ if (!(dcsr & (DCSR_ERROR | DCSR_DONEA | DCSR_DONEB)))
+ return IRQ_NONE;
+
+ /* Clear reported status bits */
+ writel_relaxed(dcsr & (DCSR_ERROR | DCSR_DONEA | DCSR_DONEB),
+ p->base + DMA_DCSR_C);
+
+ dev_dbg(d->slave.dev, "pchan %u: irq: DCSR:%02x\n", p->num, dcsr);
+
+ if (dcsr & DCSR_ERROR) {
+ dev_err(d->slave.dev, "pchan %u: error. DCSR:%02x DDAR:%08x DBSA:%08x DBTA:%08x DBSB:%08x DBTB:%08x\n",
+ p->num, dcsr,
+ readl_relaxed(p->base + DMA_DDAR),
+ readl_relaxed(p->base + DMA_DBSA),
+ readl_relaxed(p->base + DMA_DBTA),
+ readl_relaxed(p->base + DMA_DBSB),
+ readl_relaxed(p->base + DMA_DBTB));
+ }
+
+ c = p->vchan;
+ if (c) {
+ unsigned long flags;
+
+ spin_lock_irqsave(&c->lock, flags);
+ /*
+ * Now that we're holding the lock, check that the vchan
+ * really is associated with this pchan before touching the
+ * hardware. This should always succeed, because we won't
+ * change p->vchan or c->phy while the channel is actively
+ * transferring.
+ */
+ if (c->phy == p) {
+ if (dcsr & DCSR_DONEA)
+ sa11x0_dma_complete(p, c);
+ if (dcsr & DCSR_DONEB)
+ sa11x0_dma_complete(p, c);
+ }
+ spin_unlock_irqrestore(&c->lock, flags);
+ }
+
+ return IRQ_HANDLED;
+}
+
+static void sa11x0_dma_start_txd(struct sa11x0_dma_chan *c)
+{
+ struct sa11x0_dma_desc *txd = sa11x0_dma_next_desc(c);
+
+ /* If the issued list is empty, we have no further txds to process */
+ if (txd) {
+ struct sa11x0_dma_phy *p = c->phy;
+
+ sa11x0_dma_start_desc(p, txd);
+ p->txd_done = txd;
+ p->sg_done = 0;
+
+ /* The channel should not have any transfers started */
+ WARN_ON(readl_relaxed(p->base + DMA_DCSR_R) &
+ (DCSR_STRTA | DCSR_STRTB));
+
+ /* Clear the run and start bits before changing DDAR */
+ writel_relaxed(DCSR_RUN | DCSR_STRTA | DCSR_STRTB,
+ p->base + DMA_DCSR_C);
+ writel_relaxed(txd->ddar, p->base + DMA_DDAR);
+
+ /* Try to start both buffers */
+ sa11x0_dma_start_sg(p, c);
+ sa11x0_dma_start_sg(p, c);
+ }
+}
+
+static void sa11x0_dma_tasklet(unsigned long arg)
+{
+ struct sa11x0_dma_dev *d = (struct sa11x0_dma_dev *)arg;
+ struct sa11x0_dma_phy *p;
+ struct sa11x0_dma_chan *c;
+ struct sa11x0_dma_desc *txd, *txn;
+ LIST_HEAD(head);
+ unsigned pch, pch_alloc = 0;
+
+ dev_dbg(d->slave.dev, "tasklet enter\n");
+
+ /* Get the completed tx descriptors */
+ spin_lock_irq(&d->lock);
+ list_splice_init(&d->desc_complete, &head);
+ spin_unlock_irq(&d->lock);
+
+ list_for_each_entry(txd, &head, node) {
+ c = to_sa11x0_dma_chan(txd->tx.chan);
+
+ dev_dbg(d->slave.dev, "vchan %p: txd %p[%x] completed\n",
+ c, txd, txd->tx.cookie);
+
+ spin_lock_irq(&c->lock);
+ p = c->phy;
+ if (p) {
+ if (!p->txd_done)
+ sa11x0_dma_start_txd(c);
+ if (!p->txd_done) {
+ /* No current txd associated with this channel */
+ dev_dbg(d->slave.dev, "pchan %u: free\n", p->num);
+
+ /* Mark this channel free */
+ c->phy = NULL;
+ p->vchan = NULL;
+ }
+ }
+ spin_unlock_irq(&c->lock);
+ }
+
+ spin_lock_irq(&d->lock);
+ for (pch = 0; pch < NR_PHY_CHAN; pch++) {
+ p = &d->phy[pch];
+
+ if (p->vchan == NULL && !list_empty(&d->chan_pending)) {
+ c = list_first_entry(&d->chan_pending,
+ struct sa11x0_dma_chan, node);
+ list_del_init(&c->node);
+
+ pch_alloc |= 1 << pch;
+
+ /* Mark this channel allocated */
+ p->vchan = c;
+
+ dev_dbg(d->slave.dev, "pchan %u: alloc vchan %p\n", pch, c);
+ }
+ }
+ spin_unlock_irq(&d->lock);
+
+ for (pch = 0; pch < NR_PHY_CHAN; pch++) {
+ if (pch_alloc & (1 << pch)) {
+ p = &d->phy[pch];
+ c = p->vchan;
+
+ spin_lock_irq(&c->lock);
+ c->phy = p;
+
+ sa11x0_dma_start_txd(c);
+ spin_unlock_irq(&c->lock);
+ }
+ }
+
+ /* Now free the completed tx descriptor, and call their callbacks */
+ list_for_each_entry_safe(txd, txn, &head, node) {
+ dma_async_tx_callback callback = txd->tx.callback;
+ void *callback_param = txd->tx.callback_param;
+
+ dev_dbg(d->slave.dev, "txd %p[%x]: callback and free\n",
+ txd, txd->tx.cookie);
+
+ kfree(txd);
+
+ if (callback)
+ callback(callback_param);
+ }
+
+ dev_dbg(d->slave.dev, "tasklet exit\n");
+}
+
+
+static void sa11x0_dma_desc_free(struct sa11x0_dma_dev *d, struct list_head *head)
+{
+ struct sa11x0_dma_desc *txd, *txn;
+
+ list_for_each_entry_safe(txd, txn, head, node) {
+ dev_dbg(d->slave.dev, "txd %p: freeing\n", txd);
+ kfree(txd);
+ }
+}
+
+static int sa11x0_dma_alloc_chan_resources(struct dma_chan *chan)
+{
+ return 0;
+}
+
+static void sa11x0_dma_free_chan_resources(struct dma_chan *chan)
+{
+ struct sa11x0_dma_chan *c = to_sa11x0_dma_chan(chan);
+ struct sa11x0_dma_dev *d = to_sa11x0_dma(chan->device);
+ unsigned long flags;
+ LIST_HEAD(head);
+
+ spin_lock_irqsave(&c->lock, flags);
+ spin_lock(&d->lock);
+ list_del_init(&c->node);
+ spin_unlock(&d->lock);
+
+ list_splice_tail_init(&c->desc_submitted, &head);
+ list_splice_tail_init(&c->desc_issued, &head);
+ spin_unlock_irqrestore(&c->lock, flags);
+
+ sa11x0_dma_desc_free(d, &head);
+}
+
+static dma_addr_t sa11x0_dma_pos(struct sa11x0_dma_phy *p)
+{
+ unsigned reg;
+ u32 dcsr;
+
+ dcsr = readl_relaxed(p->base + DMA_DCSR_R);
+
+ if ((dcsr & (DCSR_BIU | DCSR_STRTA)) == DCSR_STRTA ||
+ (dcsr & (DCSR_BIU | DCSR_STRTB)) == DCSR_BIU)
+ reg = DMA_DBSA;
+ else
+ reg = DMA_DBSB;
+
+ return readl_relaxed(p->base + reg);
+}
+
+static enum dma_status sa11x0_dma_tx_status(struct dma_chan *chan,
+ dma_cookie_t cookie, struct dma_tx_state *state)
+{
+ struct sa11x0_dma_chan *c = to_sa11x0_dma_chan(chan);
+ struct sa11x0_dma_dev *d = to_sa11x0_dma(chan->device);
+ struct sa11x0_dma_phy *p;
+ struct sa11x0_dma_desc *txd;
+ dma_cookie_t last_used, last_complete;
+ unsigned long flags;
+ enum dma_status ret;
+ size_t bytes = 0;
+
+ last_used = c->chan.cookie;
+ last_complete = c->lc;
+
+ ret = dma_async_is_complete(cookie, last_complete, last_used);
+ if (ret == DMA_SUCCESS) {
+ dma_set_tx_state(state, last_complete, last_used, 0);
+ return ret;
+ }
+
+ spin_lock_irqsave(&c->lock, flags);
+ p = c->phy;
+ ret = c->status;
+ if (p) {
+ dma_addr_t addr = sa11x0_dma_pos(p);
+
+ dev_vdbg(d->slave.dev, "tx_status: addr:%x\n", addr);
+
+ txd = p->txd_done;
+ if (txd) {
+ unsigned i;
+
+ for (i = 0; i < txd->sglen; i++) {
+ dev_vdbg(d->slave.dev, "tx_status: [%u] %x+%x\n",
+ i, txd->sg[i].addr, txd->sg[i].len);
+ if (addr >= txd->sg[i].addr &&
+ addr < txd->sg[i].addr + txd->sg[i].len) {
+ unsigned len;
+
+ len = txd->sg[i].len -
+ (addr - txd->sg[i].addr);
+ dev_vdbg(d->slave.dev, "tx_status: [%u] +%x\n",
+ i, len);
+ bytes += len;
+ i++;
+ break;
+ }
+ }
+ for (; i < txd->sglen; i++) {
+ dev_vdbg(d->slave.dev, "tx_status: [%u] %x+%x ++\n",
+ i, txd->sg[i].addr, txd->sg[i].len);
+ bytes += txd->sg[i].len;
+ }
+ }
+ if (txd != p->txd_load && p->txd_load)
+ bytes += p->txd_load->size;
+ }
+ list_for_each_entry(txd, &c->desc_issued, node) {
+ bytes += txd->size;
+ }
+ spin_unlock_irqrestore(&c->lock, flags);
+
+ dma_set_tx_state(state, last_complete, last_used, bytes);
+
+ dev_vdbg(d->slave.dev, "tx_status: bytes 0x%zx\n", bytes);
+
+ return ret;
+}
+
+/*
+ * Move pending txds to the issued list, and re-init pending list.
+ * If not already pending, add this channel to the list of pending
+ * channels and trigger the tasklet to run.
+ */
+static void sa11x0_dma_issue_pending(struct dma_chan *chan)
+{
+ struct sa11x0_dma_chan *c = to_sa11x0_dma_chan(chan);
+ struct sa11x0_dma_dev *d = to_sa11x0_dma(chan->device);
+ unsigned long flags;
+
+ spin_lock_irqsave(&c->lock, flags);
+ list_splice_tail_init(&c->desc_submitted, &c->desc_issued);
+ if (!list_empty(&c->desc_issued)) {
+ spin_lock(&d->lock);
+ if (!c->phy && list_empty(&c->node)) {
+ list_add_tail(&c->node, &d->chan_pending);
+ tasklet_schedule(&d->task);
+ dev_dbg(d->slave.dev, "vchan %p: issued\n", c);
+ }
+ spin_unlock(&d->lock);
+ } else
+ dev_dbg(d->slave.dev, "vchan %p: nothing to issue\n", c);
+ spin_unlock_irqrestore(&c->lock, flags);
+}
+
+static dma_cookie_t sa11x0_dma_tx_submit(struct dma_async_tx_descriptor *tx)
+{
+ struct sa11x0_dma_chan *c = to_sa11x0_dma_chan(tx->chan);
+ struct sa11x0_dma_desc *txd = to_sa11x0_dma_tx(tx);
+ unsigned long flags;
+
+ spin_lock_irqsave(&c->lock, flags);
+ c->chan.cookie += 1;
+ if (c->chan.cookie < 0)
+ c->chan.cookie = 1;
+ txd->tx.cookie = c->chan.cookie;
+
+ list_add_tail(&txd->node, &c->desc_submitted);
+ spin_unlock_irqrestore(&c->lock, flags);
+
+ dev_dbg(tx->chan->device->dev, "vchan %p: txd %p[%x]: submitted\n",
+ c, txd, txd->tx.cookie);
+
+ return txd->tx.cookie;
+}
+
+static struct dma_async_tx_descriptor *sa11x0_dma_prep_slave_sg(
+ struct dma_chan *chan, struct scatterlist *sg, unsigned int sglen,
+ enum dma_transfer_direction dir, unsigned long flags)
+{
+ struct sa11x0_dma_chan *c = to_sa11x0_dma_chan(chan);
+ struct sa11x0_dma_desc *txd;
+ struct scatterlist *sgent;
+ unsigned i, j = sglen;
+ size_t size = 0;
+
+ /* SA11x0 channels can only operate in their native direction */
+ if (dir != (c->ddar & DDAR_RW ? DMA_DEV_TO_MEM : DMA_MEM_TO_DEV)) {
+ dev_err(chan->device->dev, "vchan %p: bad DMA direction: DDAR:%08x dir:%u\n",
+ c, c->ddar, dir);
+ return NULL;
+ }
+
+ /* Do not allow zero-sized txds */
+ if (sglen == 0)
+ return NULL;
+
+ for_each_sg(sg, sgent, sglen, i) {
+ dma_addr_t addr = sg_dma_address(sgent);
+ unsigned int len = sg_dma_len(sgent);
+
+ if (len > DMA_MAX_SIZE)
+ j += DIV_ROUND_UP(len, DMA_MAX_SIZE & ~DMA_ALIGN) - 1;
+ if (addr & DMA_ALIGN) {
+ dev_dbg(chan->device->dev, "vchan %p: bad buffer alignment: %08x\n",
+ c, addr);
+ return NULL;
+ }
+ }
+
+ txd = kzalloc(sizeof(*txd) + j * sizeof(txd->sg[0]), GFP_ATOMIC);
+ if (!txd) {
+ dev_dbg(chan->device->dev, "vchan %p: kzalloc failed\n", c);
+ return NULL;
+ }
+
+ j = 0;
+ for_each_sg(sg, sgent, sglen, i) {
+ dma_addr_t addr = sg_dma_address(sgent);
+ unsigned len = sg_dma_len(sgent);
+
+ size += len;
+
+ do {
+ unsigned tlen = len;
+
+ /*
+ * Check whether the transfer will fit. If not, try
+ * to split the transfer up such that we end up with
+ * equal chunks - but make sure that we preserve the
+ * alignment. This avoids small segments.
+ */
+ if (tlen > DMA_MAX_SIZE) {
+ unsigned mult = DIV_ROUND_UP(tlen,
+ DMA_MAX_SIZE & ~DMA_ALIGN);
+
+ tlen = (tlen / mult) & ~DMA_ALIGN;
+ }
+
+ txd->sg[j].addr = addr;
+ txd->sg[j].len = tlen;
+
+ addr += tlen;
+ len -= tlen;
+ j++;
+ } while (len);
+ }
+
+ dma_async_tx_descriptor_init(&txd->tx, &c->chan);
+ txd->tx.flags = flags;
+ txd->tx.tx_submit = sa11x0_dma_tx_submit;
+ txd->ddar = c->ddar;
+ txd->size = size;
+ txd->sglen = j;
+
+ dev_dbg(chan->device->dev, "vchan %p: txd %p: size %u nr %u\n",
+ c, txd, txd->size, txd->sglen);
+
+ return &txd->tx;
+}
+
+static int sa11x0_dma_slave_config(struct sa11x0_dma_chan *c, struct dma_slave_config *cfg)
+{
+ u32 ddar = c->ddar & ((0xf << 4) | DDAR_RW);
+ dma_addr_t addr;
+ enum dma_slave_buswidth width;
+ u32 maxburst;
+
+ if (ddar & DDAR_RW) {
+ addr = cfg->src_addr;
+ width = cfg->src_addr_width;
+ maxburst = cfg->src_maxburst;
+ } else {
+ addr = cfg->dst_addr;
+ width = cfg->dst_addr_width;
+ maxburst = cfg->dst_maxburst;
+ }
+
+ if ((width != DMA_SLAVE_BUSWIDTH_1_BYTE &&
+ width != DMA_SLAVE_BUSWIDTH_2_BYTES) ||
+ (maxburst != 4 && maxburst != 8))
+ return -EINVAL;
+
+ if (width == DMA_SLAVE_BUSWIDTH_2_BYTES)
+ ddar |= DDAR_DW;
+ if (maxburst == 8)
+ ddar |= DDAR_BS;
+
+ dev_dbg(c->chan.device->dev, "vchan %p: dma_slave_config addr %x width %u burst %u\n",
+ c, addr, width, maxburst);
+
+ c->ddar = ddar | (addr & 0xf0000000) | (addr & 0x003ffffc) << 6;
+
+ return 0;
+}
+
+static int sa11x0_dma_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd,
+ unsigned long arg)
+{
+ struct sa11x0_dma_chan *c = to_sa11x0_dma_chan(chan);
+ struct sa11x0_dma_dev *d = to_sa11x0_dma(chan->device);
+ struct sa11x0_dma_phy *p;
+ LIST_HEAD(head);
+ unsigned long flags;
+ int ret;
+
+ switch (cmd) {
+ case DMA_SLAVE_CONFIG:
+ return sa11x0_dma_slave_config(c, (struct dma_slave_config *)arg);
+
+ case DMA_TERMINATE_ALL:
+ dev_dbg(d->slave.dev, "vchan %p: terminate all\n", c);
+ /* Clear the tx descriptor lists */
+ spin_lock_irqsave(&c->lock, flags);
+ list_splice_tail_init(&c->desc_submitted, &head);
+ list_splice_tail_init(&c->desc_issued, &head);
+
+ p = c->phy;
+ if (p) {
+ struct sa11x0_dma_desc *txd, *txn;
+
+ dev_dbg(d->slave.dev, "pchan %u: terminating\n", p->num);
+ /* vchan is assigned to a pchan - stop the channel */
+ writel(DCSR_RUN | DCSR_IE |
+ DCSR_STRTA | DCSR_DONEA |
+ DCSR_STRTB | DCSR_DONEB,
+ p->base + DMA_DCSR_C);
+
+ list_for_each_entry_safe(txd, txn, &d->desc_complete, node)
+ if (txd->tx.chan == &c->chan)
+ list_move(&txd->node, &head);
+
+ if (p->txd_load) {
+ if (p->txd_load != p->txd_done)
+ list_add_tail(&p->txd_load->node, &head);
+ p->txd_load = NULL;
+ }
+ if (p->txd_done) {
+ list_add_tail(&p->txd_done->node, &head);
+ p->txd_done = NULL;
+ }
+ c->phy = NULL;
+ spin_lock(&d->lock);
+ p->vchan = NULL;
+ spin_unlock(&d->lock);
+ tasklet_schedule(&d->task);
+ }
+ spin_unlock_irqrestore(&c->lock, flags);
+ sa11x0_dma_desc_free(d, &head);
+ ret = 0;
+ break;
+
+ case DMA_PAUSE:
+ dev_dbg(d->slave.dev, "vchan %p: pause\n", c);
+ spin_lock_irqsave(&c->lock, flags);
+ if (c->status == DMA_IN_PROGRESS) {
+ c->status = DMA_PAUSED;
+
+ p = c->phy;
+ if (p) {
+ writel(DCSR_RUN | DCSR_IE, p->base + DMA_DCSR_C);
+ } else {
+ spin_lock(&d->lock);
+ list_del_init(&c->node);
+ spin_unlock(&d->lock);
+ }
+ }
+ spin_unlock_irqrestore(&c->lock, flags);
+ ret = 0;
+ break;
+
+ case DMA_RESUME:
+ dev_dbg(d->slave.dev, "vchan %p: resume\n", c);
+ spin_lock_irqsave(&c->lock, flags);
+ if (c->status == DMA_PAUSED) {
+ c->status = DMA_IN_PROGRESS;
+
+ p = c->phy;
+ if (p) {
+ writel(DCSR_RUN | DCSR_IE, p->base + DMA_DCSR_S);
+ } else if (!list_empty(&c->desc_issued)) {
+ spin_lock(&d->lock);
+ list_add_tail(&c->node, &d->chan_pending);
+ spin_unlock(&d->lock);
+ }
+ }
+ spin_unlock_irqrestore(&c->lock, flags);
+ ret = 0;
+ break;
+
+ default:
+ ret = -ENXIO;
+ break;
+ }
+
+ return ret;
+}
+
+struct sa11x0_dma_channel_desc {
+ u32 ddar;
+ const char *name;
+};
+
+#define CD(d1, d2) { .ddar = DDAR_##d1 | d2, .name = #d1 }
+static const struct sa11x0_dma_channel_desc chan_desc[] = {
+ CD(Ser0UDCTr, 0),
+ CD(Ser0UDCRc, DDAR_RW),
+ CD(Ser1SDLCTr, 0),
+ CD(Ser1SDLCRc, DDAR_RW),
+ CD(Ser1UARTTr, 0),
+ CD(Ser1UARTRc, DDAR_RW),
+ CD(Ser2ICPTr, 0),
+ CD(Ser2ICPRc, DDAR_RW),
+ CD(Ser3UARTTr, 0),
+ CD(Ser3UARTRc, DDAR_RW),
+ CD(Ser4MCP0Tr, 0),
+ CD(Ser4MCP0Rc, DDAR_RW),
+ CD(Ser4MCP1Tr, 0),
+ CD(Ser4MCP1Rc, DDAR_RW),
+ CD(Ser4SSPTr, 0),
+ CD(Ser4SSPRc, DDAR_RW),
+};
+
+static int __devinit sa11x0_dma_init_dmadev(struct dma_device *dmadev,
+ struct device *dev)
+{
+ unsigned i;
+
+ dmadev->chancnt = ARRAY_SIZE(chan_desc);
+ INIT_LIST_HEAD(&dmadev->channels);
+ dmadev->dev = dev;
+ dmadev->device_alloc_chan_resources = sa11x0_dma_alloc_chan_resources;
+ dmadev->device_free_chan_resources = sa11x0_dma_free_chan_resources;
+ dmadev->device_control = sa11x0_dma_control;
+ dmadev->device_tx_status = sa11x0_dma_tx_status;
+ dmadev->device_issue_pending = sa11x0_dma_issue_pending;
+
+ for (i = 0; i < dmadev->chancnt; i++) {
+ struct sa11x0_dma_chan *c;
+
+ c = kzalloc(sizeof(*c), GFP_KERNEL);
+ if (!c) {
+ dev_err(dev, "no memory for channel %u\n", i);
+ return -ENOMEM;
+ }
+
+ c->chan.device = dmadev;
+ c->status = DMA_IN_PROGRESS;
+ c->ddar = chan_desc[i].ddar;
+ c->name = chan_desc[i].name;
+ spin_lock_init(&c->lock);
+ INIT_LIST_HEAD(&c->desc_submitted);
+ INIT_LIST_HEAD(&c->desc_issued);
+ INIT_LIST_HEAD(&c->node);
+ list_add_tail(&c->chan.device_node, &dmadev->channels);
+ }
+
+ return dma_async_device_register(dmadev);
+}
+
+static int sa11x0_dma_request_irq(struct platform_device *pdev, int nr,
+ void *data)
+{
+ int irq = platform_get_irq(pdev, nr);
+
+ if (irq <= 0)
+ return -ENXIO;
+
+ return request_irq(irq, sa11x0_dma_irq, 0, dev_name(&pdev->dev), data);
+}
+
+static void sa11x0_dma_free_irq(struct platform_device *pdev, int nr,
+ void *data)
+{
+ int irq = platform_get_irq(pdev, nr);
+ if (irq > 0)
+ free_irq(irq, data);
+}
+
+static void sa11x0_dma_free_channels(struct dma_device *dmadev)
+{
+ struct sa11x0_dma_chan *c, *cn;
+
+ list_for_each_entry_safe(c, cn, &dmadev->channels, chan.device_node) {
+ list_del(&c->chan.device_node);
+ kfree(c);
+ }
+}
+
+static int __devinit sa11x0_dma_probe(struct platform_device *pdev)
+{
+ struct sa11x0_dma_dev *d;
+ struct resource *res;
+ unsigned i;
+ int ret;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res)
+ return -ENXIO;
+
+ d = kzalloc(sizeof(*d), GFP_KERNEL);
+ if (!d) {
+ ret = -ENOMEM;
+ goto err_alloc;
+ }
+
+ spin_lock_init(&d->lock);
+ INIT_LIST_HEAD(&d->chan_pending);
+ INIT_LIST_HEAD(&d->desc_complete);
+
+ d->base = ioremap(res->start, resource_size(res));
+ if (!d->base) {
+ ret = -ENOMEM;
+ goto err_ioremap;
+ }
+
+ tasklet_init(&d->task, sa11x0_dma_tasklet, (unsigned long)d);
+
+ for (i = 0; i < NR_PHY_CHAN; i++) {
+ struct sa11x0_dma_phy *p = &d->phy[i];
+
+ p->dev = d;
+ p->num = i;
+ p->base = d->base + i * DMA_SIZE;
+ writel_relaxed(DCSR_RUN | DCSR_IE | DCSR_ERROR |
+ DCSR_DONEA | DCSR_STRTA | DCSR_DONEB | DCSR_STRTB,
+ p->base + DMA_DCSR_C);
+ writel_relaxed(0, p->base + DMA_DDAR);
+
+ ret = sa11x0_dma_request_irq(pdev, i, p);
+ if (ret) {
+ while (i) {
+ i--;
+ sa11x0_dma_free_irq(pdev, i, &d->phy[i]);
+ }
+ goto err_irq;
+ }
+ }
+
+ dma_cap_set(DMA_SLAVE, d->slave.cap_mask);
+ d->slave.device_prep_slave_sg = sa11x0_dma_prep_slave_sg;
+ ret = sa11x0_dma_init_dmadev(&d->slave, &pdev->dev);
+ if (ret) {
+ dev_warn(d->slave.dev, "failed to register slave async device: %d\n",
+ ret);
+ goto err_slave_reg;
+ }
+
+ platform_set_drvdata(pdev, d);
+ return 0;
+
+ err_slave_reg:
+ sa11x0_dma_free_channels(&d->slave);
+ for (i = 0; i < NR_PHY_CHAN; i++)
+ sa11x0_dma_free_irq(pdev, i, &d->phy[i]);
+ err_irq:
+ tasklet_kill(&d->task);
+ iounmap(d->base);
+ err_ioremap:
+ kfree(d);
+ err_alloc:
+ return ret;
+}
+
+static int __devexit sa11x0_dma_remove(struct platform_device *pdev)
+{
+ struct sa11x0_dma_dev *d = platform_get_drvdata(pdev);
+ unsigned pch;
+
+ dma_async_device_unregister(&d->slave);
+
+ sa11x0_dma_free_channels(&d->slave);
+ for (pch = 0; pch < NR_PHY_CHAN; pch++)
+ sa11x0_dma_free_irq(pdev, pch, &d->phy[pch]);
+ tasklet_kill(&d->task);
+ iounmap(d->base);
+ kfree(d);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int sa11x0_dma_suspend(struct device *dev)
+{
+ struct sa11x0_dma_dev *d = dev_get_drvdata(dev);
+ unsigned pch;
+
+ for (pch = 0; pch < NR_PHY_CHAN; pch++) {
+ struct sa11x0_dma_phy *p = &d->phy[pch];
+ u32 dcsr, saved_dcsr;
+
+ dcsr = saved_dcsr = readl_relaxed(p->base + DMA_DCSR_R);
+ if (dcsr & DCSR_RUN) {
+ writel(DCSR_RUN | DCSR_IE, p->base + DMA_DCSR_C);
+ dcsr = readl_relaxed(p->base + DMA_DCSR_R);
+ }
+
+ saved_dcsr &= DCSR_RUN | DCSR_IE;
+ if (dcsr & DCSR_BIU) {
+ p->dbs[0] = readl_relaxed(p->base + DMA_DBSB);
+ p->dbt[0] = readl_relaxed(p->base + DMA_DBTB);
+ p->dbs[1] = readl_relaxed(p->base + DMA_DBSA);
+ p->dbt[1] = readl_relaxed(p->base + DMA_DBTA);
+ saved_dcsr |= (dcsr & DCSR_STRTA ? DCSR_STRTB : 0) |
+ (dcsr & DCSR_STRTB ? DCSR_STRTA : 0);
+ } else {
+ p->dbs[0] = readl_relaxed(p->base + DMA_DBSA);
+ p->dbt[0] = readl_relaxed(p->base + DMA_DBTA);
+ p->dbs[1] = readl_relaxed(p->base + DMA_DBSB);
+ p->dbt[1] = readl_relaxed(p->base + DMA_DBTB);
+ saved_dcsr |= dcsr & (DCSR_STRTA | DCSR_STRTB);
+ }
+ p->dcsr = saved_dcsr;
+
+ writel(DCSR_STRTA | DCSR_STRTB, p->base + DMA_DCSR_C);
+ }
+
+ return 0;
+}
+
+static int sa11x0_dma_resume(struct device *dev)
+{
+ struct sa11x0_dma_dev *d = dev_get_drvdata(dev);
+ unsigned pch;
+
+ for (pch = 0; pch < NR_PHY_CHAN; pch++) {
+ struct sa11x0_dma_phy *p = &d->phy[pch];
+ struct sa11x0_dma_desc *txd = NULL;
+ u32 dcsr = readl_relaxed(p->base + DMA_DCSR_R);
+
+ WARN_ON(dcsr & (DCSR_BIU | DCSR_STRTA | DCSR_STRTB | DCSR_RUN));
+
+ if (p->txd_done)
+ txd = p->txd_done;
+ else if (p->txd_load)
+ txd = p->txd_load;
+
+ if (!txd)
+ continue;
+
+ writel_relaxed(txd->ddar, p->base + DMA_DDAR);
+
+ writel_relaxed(p->dbs[0], p->base + DMA_DBSA);
+ writel_relaxed(p->dbt[0], p->base + DMA_DBTA);
+ writel_relaxed(p->dbs[1], p->base + DMA_DBSB);
+ writel_relaxed(p->dbt[1], p->base + DMA_DBTB);
+ writel_relaxed(p->dcsr, p->base + DMA_DCSR_S);
+ }
+
+ return 0;
+}
+#endif
+
+static const struct dev_pm_ops sa11x0_dma_pm_ops = {
+ .suspend_noirq = sa11x0_dma_suspend,
+ .resume_noirq = sa11x0_dma_resume,
+ .freeze_noirq = sa11x0_dma_suspend,
+ .thaw_noirq = sa11x0_dma_resume,
+ .poweroff_noirq = sa11x0_dma_suspend,
+ .restore_noirq = sa11x0_dma_resume,
+};
+
+static struct platform_driver sa11x0_dma_driver = {
+ .driver = {
+ .name = "sa11x0-dma",
+ .owner = THIS_MODULE,
+ .pm = &sa11x0_dma_pm_ops,
+ },
+ .probe = sa11x0_dma_probe,
+ .remove = __devexit_p(sa11x0_dma_remove),
+};
+
+bool sa11x0_dma_filter_fn(struct dma_chan *chan, void *param)
+{
+ if (chan->device->dev->driver == &sa11x0_dma_driver.driver) {
+ struct sa11x0_dma_chan *c = to_sa11x0_dma_chan(chan);
+ const char *p = param;
+
+ return !strcmp(c->name, p);
+ }
+ return false;
+}
+EXPORT_SYMBOL(sa11x0_dma_filter_fn);
+
+static int __init sa11x0_dma_init(void)
+{
+ return platform_driver_register(&sa11x0_dma_driver);
+}
+subsys_initcall(sa11x0_dma_init);
+
+static void __exit sa11x0_dma_exit(void)
+{
+ platform_driver_unregister(&sa11x0_dma_driver);
+}
+module_exit(sa11x0_dma_exit);
+
+MODULE_AUTHOR("Russell King");
+MODULE_DESCRIPTION("SA-11x0 DMA driver");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:sa11x0-dma");
diff --git a/drivers/gpio/gpio-sa1100.c b/drivers/gpio/gpio-sa1100.c
index 7eecf69362e..8ea3b33d4b4 100644
--- a/drivers/gpio/gpio-sa1100.c
+++ b/drivers/gpio/gpio-sa1100.c
@@ -12,6 +12,7 @@
#include <linux/module.h>
#include <mach/hardware.h>
+#include <mach/irqs.h>
static int sa1100_gpio_get(struct gpio_chip *chip, unsigned offset)
{
diff --git a/drivers/input/keyboard/jornada720_kbd.c b/drivers/input/keyboard/jornada720_kbd.c
index eeafc30b207..9d639fa1afb 100644
--- a/drivers/input/keyboard/jornada720_kbd.c
+++ b/drivers/input/keyboard/jornada720_kbd.c
@@ -27,6 +27,7 @@
#include <mach/jornada720.h>
#include <mach/hardware.h>
+#include <mach/irqs.h>
MODULE_AUTHOR("Kristoffer Ericson <Kristoffer.Ericson@gmail.com>");
MODULE_DESCRIPTION("HP Jornada 710/720/728 keyboard driver");
diff --git a/drivers/input/serio/rpckbd.c b/drivers/input/serio/rpckbd.c
index 8b44ddc8041..58b224498b3 100644
--- a/drivers/input/serio/rpckbd.c
+++ b/drivers/input/serio/rpckbd.c
@@ -36,7 +36,6 @@
#include <linux/io.h>
#include <linux/slab.h>
-#include <asm/irq.h>
#include <mach/hardware.h>
#include <asm/hardware/iomd.h>
#include <asm/system.h>
@@ -46,6 +45,11 @@ MODULE_DESCRIPTION("Acorn RiscPC PS/2 keyboard controller driver");
MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:kart");
+struct rpckbd_data {
+ int tx_irq;
+ int rx_irq;
+};
+
static int rpckbd_write(struct serio *port, unsigned char val)
{
while (!(iomd_readb(IOMD_KCTRL) & (1 << 7)))
@@ -78,19 +82,21 @@ static irqreturn_t rpckbd_tx(int irq, void *dev_id)
static int rpckbd_open(struct serio *port)
{
+ struct rpckbd_data *rpckbd = port->port_data;
+
/* Reset the keyboard state machine. */
iomd_writeb(0, IOMD_KCTRL);
iomd_writeb(8, IOMD_KCTRL);
iomd_readb(IOMD_KARTRX);
- if (request_irq(IRQ_KEYBOARDRX, rpckbd_rx, 0, "rpckbd", port) != 0) {
+ if (request_irq(rpckbd->rx_irq, rpckbd_rx, 0, "rpckbd", port) != 0) {
printk(KERN_ERR "rpckbd.c: Could not allocate keyboard receive IRQ\n");
return -EBUSY;
}
- if (request_irq(IRQ_KEYBOARDTX, rpckbd_tx, 0, "rpckbd", port) != 0) {
+ if (request_irq(rpckbd->tx_irq, rpckbd_tx, 0, "rpckbd", port) != 0) {
printk(KERN_ERR "rpckbd.c: Could not allocate keyboard transmit IRQ\n");
- free_irq(IRQ_KEYBOARDRX, port);
+ free_irq(rpckbd->rx_irq, port);
return -EBUSY;
}
@@ -99,8 +105,10 @@ static int rpckbd_open(struct serio *port)
static void rpckbd_close(struct serio *port)
{
- free_irq(IRQ_KEYBOARDRX, port);
- free_irq(IRQ_KEYBOARDTX, port);
+ struct rpckbd_data *rpckbd = port->port_data;
+
+ free_irq(rpckbd->rx_irq, port);
+ free_irq(rpckbd->tx_irq, port);
}
/*
@@ -109,17 +117,35 @@ static void rpckbd_close(struct serio *port)
*/
static int __devinit rpckbd_probe(struct platform_device *dev)
{
+ struct rpckbd_data *rpckbd;
struct serio *serio;
+ int tx_irq, rx_irq;
+
+ rx_irq = platform_get_irq(dev, 0);
+ if (rx_irq <= 0)
+ return rx_irq < 0 ? rx_irq : -ENXIO;
+
+ tx_irq = platform_get_irq(dev, 1);
+ if (tx_irq <= 0)
+ return tx_irq < 0 ? tx_irq : -ENXIO;
serio = kzalloc(sizeof(struct serio), GFP_KERNEL);
- if (!serio)
+ rpckbd = kzalloc(sizeof(*rpckbd), GFP_KERNEL);
+ if (!serio || !rpckbd) {
+ kfree(rpckbd);
+ kfree(serio);
return -ENOMEM;
+ }
+
+ rpckbd->rx_irq = rx_irq;
+ rpckbd->tx_irq = tx_irq;
serio->id.type = SERIO_8042;
serio->write = rpckbd_write;
serio->open = rpckbd_open;
serio->close = rpckbd_close;
serio->dev.parent = &dev->dev;
+ serio->port_data = rpckbd;
strlcpy(serio->name, "RiscPC PS/2 kbd port", sizeof(serio->name));
strlcpy(serio->phys, "rpckbd/serio0", sizeof(serio->phys));
@@ -131,7 +157,11 @@ static int __devinit rpckbd_probe(struct platform_device *dev)
static int __devexit rpckbd_remove(struct platform_device *dev)
{
struct serio *serio = platform_get_drvdata(dev);
+ struct rpckbd_data *rpckbd = serio->port_data;
+
serio_unregister_port(serio);
+ kfree(rpckbd);
+
return 0;
}
diff --git a/drivers/input/serio/sa1111ps2.c b/drivers/input/serio/sa1111ps2.c
index 44fc8b4bcd8..5ebabe3fc84 100644
--- a/drivers/input/serio/sa1111ps2.c
+++ b/drivers/input/serio/sa1111ps2.c
@@ -24,6 +24,26 @@
#include <asm/hardware/sa1111.h>
+#define PS2CR 0x0000
+#define PS2STAT 0x0004
+#define PS2DATA 0x0008
+#define PS2CLKDIV 0x000c
+#define PS2PRECNT 0x0010
+
+#define PS2CR_ENA 0x08
+#define PS2CR_FKD 0x02
+#define PS2CR_FKC 0x01
+
+#define PS2STAT_STP 0x0100
+#define PS2STAT_TXE 0x0080
+#define PS2STAT_TXB 0x0040
+#define PS2STAT_RXF 0x0020
+#define PS2STAT_RXB 0x0010
+#define PS2STAT_ENA 0x0008
+#define PS2STAT_RXP 0x0004
+#define PS2STAT_KBD 0x0002
+#define PS2STAT_KBC 0x0001
+
struct ps2if {
struct serio *io;
struct sa1111_dev *dev;
@@ -45,22 +65,22 @@ static irqreturn_t ps2_rxint(int irq, void *dev_id)
struct ps2if *ps2if = dev_id;
unsigned int scancode, flag, status;
- status = sa1111_readl(ps2if->base + SA1111_PS2STAT);
+ status = sa1111_readl(ps2if->base + PS2STAT);
while (status & PS2STAT_RXF) {
if (status & PS2STAT_STP)
- sa1111_writel(PS2STAT_STP, ps2if->base + SA1111_PS2STAT);
+ sa1111_writel(PS2STAT_STP, ps2if->base + PS2STAT);
flag = (status & PS2STAT_STP ? SERIO_FRAME : 0) |
(status & PS2STAT_RXP ? 0 : SERIO_PARITY);
- scancode = sa1111_readl(ps2if->base + SA1111_PS2DATA) & 0xff;
+ scancode = sa1111_readl(ps2if->base + PS2DATA) & 0xff;
if (hweight8(scancode) & 1)
flag ^= SERIO_PARITY;
serio_interrupt(ps2if->io, scancode, flag);
- status = sa1111_readl(ps2if->base + SA1111_PS2STAT);
+ status = sa1111_readl(ps2if->base + PS2STAT);
}
return IRQ_HANDLED;
@@ -75,12 +95,12 @@ static irqreturn_t ps2_txint(int irq, void *dev_id)
unsigned int status;
spin_lock(&ps2if->lock);
- status = sa1111_readl(ps2if->base + SA1111_PS2STAT);
+ status = sa1111_readl(ps2if->base + PS2STAT);
if (ps2if->head == ps2if->tail) {
disable_irq_nosync(irq);
/* done */
} else if (status & PS2STAT_TXE) {
- sa1111_writel(ps2if->buf[ps2if->tail], ps2if->base + SA1111_PS2DATA);
+ sa1111_writel(ps2if->buf[ps2if->tail], ps2if->base + PS2DATA);
ps2if->tail = (ps2if->tail + 1) & (sizeof(ps2if->buf) - 1);
}
spin_unlock(&ps2if->lock);
@@ -103,8 +123,8 @@ static int ps2_write(struct serio *io, unsigned char val)
/*
* If the TX register is empty, we can go straight out.
*/
- if (sa1111_readl(ps2if->base + SA1111_PS2STAT) & PS2STAT_TXE) {
- sa1111_writel(val, ps2if->base + SA1111_PS2DATA);
+ if (sa1111_readl(ps2if->base + PS2STAT) & PS2STAT_TXE) {
+ sa1111_writel(val, ps2if->base + PS2DATA);
} else {
if (ps2if->head == ps2if->tail)
enable_irq(ps2if->dev->irq[1]);
@@ -124,13 +144,16 @@ static int ps2_open(struct serio *io)
struct ps2if *ps2if = io->port_data;
int ret;
- sa1111_enable_device(ps2if->dev);
+ ret = sa1111_enable_device(ps2if->dev);
+ if (ret)
+ return ret;
ret = request_irq(ps2if->dev->irq[0], ps2_rxint, 0,
SA1111_DRIVER_NAME(ps2if->dev), ps2if);
if (ret) {
printk(KERN_ERR "sa1111ps2: could not allocate IRQ%d: %d\n",
ps2if->dev->irq[0], ret);
+ sa1111_disable_device(ps2if->dev);
return ret;
}
@@ -140,6 +163,7 @@ static int ps2_open(struct serio *io)
printk(KERN_ERR "sa1111ps2: could not allocate IRQ%d: %d\n",
ps2if->dev->irq[1], ret);
free_irq(ps2if->dev->irq[0], ps2if);
+ sa1111_disable_device(ps2if->dev);
return ret;
}
@@ -147,7 +171,7 @@ static int ps2_open(struct serio *io)
enable_irq_wake(ps2if->dev->irq[0]);
- sa1111_writel(PS2CR_ENA, ps2if->base + SA1111_PS2CR);
+ sa1111_writel(PS2CR_ENA, ps2if->base + PS2CR);
return 0;
}
@@ -155,7 +179,7 @@ static void ps2_close(struct serio *io)
{
struct ps2if *ps2if = io->port_data;
- sa1111_writel(0, ps2if->base + SA1111_PS2CR);
+ sa1111_writel(0, ps2if->base + PS2CR);
disable_irq_wake(ps2if->dev->irq[0]);
@@ -175,7 +199,7 @@ static void __devinit ps2_clear_input(struct ps2if *ps2if)
int maxread = 100;
while (maxread--) {
- if ((sa1111_readl(ps2if->base + SA1111_PS2DATA) & 0xff) == 0xff)
+ if ((sa1111_readl(ps2if->base + PS2DATA) & 0xff) == 0xff)
break;
}
}
@@ -185,11 +209,11 @@ static unsigned int __devinit ps2_test_one(struct ps2if *ps2if,
{
unsigned int val;
- sa1111_writel(PS2CR_ENA | mask, ps2if->base + SA1111_PS2CR);
+ sa1111_writel(PS2CR_ENA | mask, ps2if->base + PS2CR);
udelay(2);
- val = sa1111_readl(ps2if->base + SA1111_PS2STAT);
+ val = sa1111_readl(ps2if->base + PS2STAT);
return val & (PS2STAT_KBC | PS2STAT_KBD);
}
@@ -220,7 +244,7 @@ static int __devinit ps2_test(struct ps2if *ps2if)
ret = -ENODEV;
}
- sa1111_writel(0, ps2if->base + SA1111_PS2CR);
+ sa1111_writel(0, ps2if->base + PS2CR);
return ret;
}
@@ -274,8 +298,8 @@ static int __devinit ps2_probe(struct sa1111_dev *dev)
sa1111_enable_device(ps2if->dev);
/* Incoming clock is 8MHz */
- sa1111_writel(0, ps2if->base + SA1111_PS2CLKDIV);
- sa1111_writel(127, ps2if->base + SA1111_PS2PRECNT);
+ sa1111_writel(0, ps2if->base + PS2CLKDIV);
+ sa1111_writel(127, ps2if->base + PS2PRECNT);
/*
* Flush any pending input.
@@ -330,6 +354,7 @@ static int __devexit ps2_remove(struct sa1111_dev *dev)
static struct sa1111_driver ps2_driver = {
.drv = {
.name = "sa1111-ps2",
+ .owner = THIS_MODULE,
},
.devid = SA1111_DEVID_PS2,
.probe = ps2_probe,
diff --git a/drivers/input/touchscreen/jornada720_ts.c b/drivers/input/touchscreen/jornada720_ts.c
index c3848ad2325..d9be6eac99b 100644
--- a/drivers/input/touchscreen/jornada720_ts.c
+++ b/drivers/input/touchscreen/jornada720_ts.c
@@ -22,6 +22,7 @@
#include <mach/hardware.h>
#include <mach/jornada720.h>
+#include <mach/irqs.h>
MODULE_AUTHOR("Kristoffer Ericson <kristoffer.ericson@gmail.com>");
MODULE_DESCRIPTION("HP Jornada 710/720/728 touchscreen driver");
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 1489c3540f9..243e0c663c3 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -848,8 +848,9 @@ config MCP_SA11X0
# Chip drivers
config MCP_UCB1200
- tristate "Support for UCB1200 / UCB1300"
- depends on MCP
+ bool "Support for UCB1200 / UCB1300"
+ depends on MCP_SA11X0
+ select MCP
config MCP_UCB1200_TS
tristate "Touchscreen interface support"
diff --git a/drivers/mfd/mcp-core.c b/drivers/mfd/mcp-core.c
index 86cc3f7841c..6acf2e03f2b 100644
--- a/drivers/mfd/mcp-core.c
+++ b/drivers/mfd/mcp-core.c
@@ -19,7 +19,6 @@
#include <linux/string.h>
#include <linux/mfd/mcp.h>
-#include <mach/dma.h>
#include <asm/system.h>
@@ -48,39 +47,11 @@ static int mcp_bus_remove(struct device *dev)
return 0;
}
-static int mcp_bus_suspend(struct device *dev, pm_message_t state)
-{
- struct mcp *mcp = to_mcp(dev);
- int ret = 0;
-
- if (dev->driver) {
- struct mcp_driver *drv = to_mcp_driver(dev->driver);
-
- ret = drv->suspend(mcp, state);
- }
- return ret;
-}
-
-static int mcp_bus_resume(struct device *dev)
-{
- struct mcp *mcp = to_mcp(dev);
- int ret = 0;
-
- if (dev->driver) {
- struct mcp_driver *drv = to_mcp_driver(dev->driver);
-
- ret = drv->resume(mcp);
- }
- return ret;
-}
-
static struct bus_type mcp_bus_type = {
.name = "mcp",
.match = mcp_bus_match,
.probe = mcp_bus_probe,
.remove = mcp_bus_remove,
- .suspend = mcp_bus_suspend,
- .resume = mcp_bus_resume,
};
/**
@@ -208,6 +179,7 @@ struct mcp *mcp_host_alloc(struct device *parent, size_t size)
mcp = kzalloc(sizeof(struct mcp) + size, GFP_KERNEL);
if (mcp) {
spin_lock_init(&mcp->lock);
+ device_initialize(&mcp->attached_device);
mcp->attached_device.parent = parent;
mcp->attached_device.bus = &mcp_bus_type;
mcp->attached_device.dma_mask = parent->dma_mask;
@@ -217,18 +189,25 @@ struct mcp *mcp_host_alloc(struct device *parent, size_t size)
}
EXPORT_SYMBOL(mcp_host_alloc);
-int mcp_host_register(struct mcp *mcp)
+int mcp_host_add(struct mcp *mcp, void *pdata)
{
+ mcp->attached_device.platform_data = pdata;
dev_set_name(&mcp->attached_device, "mcp0");
- return device_register(&mcp->attached_device);
+ return device_add(&mcp->attached_device);
+}
+EXPORT_SYMBOL(mcp_host_add);
+
+void mcp_host_del(struct mcp *mcp)
+{
+ device_del(&mcp->attached_device);
}
-EXPORT_SYMBOL(mcp_host_register);
+EXPORT_SYMBOL(mcp_host_del);
-void mcp_host_unregister(struct mcp *mcp)
+void mcp_host_free(struct mcp *mcp)
{
- device_unregister(&mcp->attached_device);
+ put_device(&mcp->attached_device);
}
-EXPORT_SYMBOL(mcp_host_unregister);
+EXPORT_SYMBOL(mcp_host_free);
int mcp_driver_register(struct mcp_driver *mcpdrv)
{
diff --git a/drivers/mfd/mcp-sa11x0.c b/drivers/mfd/mcp-sa11x0.c
index 02c53a0766c..1c0ceacaa1f 100644
--- a/drivers/mfd/mcp-sa11x0.c
+++ b/drivers/mfd/mcp-sa11x0.c
@@ -13,51 +13,61 @@
*/
#include <linux/module.h>
#include <linux/init.h>
+#include <linux/io.h>
#include <linux/errno.h>
#include <linux/kernel.h>
#include <linux/delay.h>
#include <linux/spinlock.h>
#include <linux/platform_device.h>
+#include <linux/pm.h>
#include <linux/mfd/mcp.h>
-#include <mach/dma.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/system.h>
#include <mach/mcp.h>
-#include <mach/assabet.h>
-
+#define DRIVER_NAME "sa11x0-mcp"
struct mcp_sa11x0 {
- u32 mccr0;
- u32 mccr1;
+ void __iomem *base0;
+ void __iomem *base1;
+ u32 mccr0;
+ u32 mccr1;
};
+/* Register offsets */
+#define MCCR0(m) ((m)->base0 + 0x00)
+#define MCDR0(m) ((m)->base0 + 0x08)
+#define MCDR1(m) ((m)->base0 + 0x0c)
+#define MCDR2(m) ((m)->base0 + 0x10)
+#define MCSR(m) ((m)->base0 + 0x18)
+#define MCCR1(m) ((m)->base1 + 0x00)
+
#define priv(mcp) ((struct mcp_sa11x0 *)mcp_priv(mcp))
static void
mcp_sa11x0_set_telecom_divisor(struct mcp *mcp, unsigned int divisor)
{
- unsigned int mccr0;
+ struct mcp_sa11x0 *m = priv(mcp);
divisor /= 32;
- mccr0 = Ser4MCCR0 & ~0x00007f00;
- mccr0 |= divisor << 8;
- Ser4MCCR0 = mccr0;
+ m->mccr0 &= ~0x00007f00;
+ m->mccr0 |= divisor << 8;
+ writel_relaxed(m->mccr0, MCCR0(m));
}
static void
mcp_sa11x0_set_audio_divisor(struct mcp *mcp, unsigned int divisor)
{
- unsigned int mccr0;
+ struct mcp_sa11x0 *m = priv(mcp);
divisor /= 32;
- mccr0 = Ser4MCCR0 & ~0x0000007f;
- mccr0 |= divisor;
- Ser4MCCR0 = mccr0;
+ m->mccr0 &= ~0x0000007f;
+ m->mccr0 |= divisor;
+ writel_relaxed(m->mccr0, MCCR0(m));
}
/*
@@ -69,14 +79,15 @@ mcp_sa11x0_set_audio_divisor(struct mcp *mcp, unsigned int divisor)
static void
mcp_sa11x0_write(struct mcp *mcp, unsigned int reg, unsigned int val)
{
+ struct mcp_sa11x0 *m = priv(mcp);
int ret = -ETIME;
int i;
- Ser4MCDR2 = reg << 17 | MCDR2_Wr | (val & 0xffff);
+ writel_relaxed(reg << 17 | MCDR2_Wr | (val & 0xffff), MCDR2(m));
for (i = 0; i < 2; i++) {
udelay(mcp->rw_timeout);
- if (Ser4MCSR & MCSR_CWC) {
+ if (readl_relaxed(MCSR(m)) & MCSR_CWC) {
ret = 0;
break;
}
@@ -95,15 +106,16 @@ mcp_sa11x0_write(struct mcp *mcp, unsigned int reg, unsigned int val)
static unsigned int
mcp_sa11x0_read(struct mcp *mcp, unsigned int reg)
{
+ struct mcp_sa11x0 *m = priv(mcp);
int ret = -ETIME;
int i;
- Ser4MCDR2 = reg << 17 | MCDR2_Rd;
+ writel_relaxed(reg << 17 | MCDR2_Rd, MCDR2(m));
for (i = 0; i < 2; i++) {
udelay(mcp->rw_timeout);
- if (Ser4MCSR & MCSR_CRC) {
- ret = Ser4MCDR2 & 0xffff;
+ if (readl_relaxed(MCSR(m)) & MCSR_CRC) {
+ ret = readl_relaxed(MCDR2(m)) & 0xffff;
break;
}
}
@@ -116,13 +128,19 @@ mcp_sa11x0_read(struct mcp *mcp, unsigned int reg)
static void mcp_sa11x0_enable(struct mcp *mcp)
{
- Ser4MCSR = -1;
- Ser4MCCR0 |= MCCR0_MCE;
+ struct mcp_sa11x0 *m = priv(mcp);
+
+ writel(-1, MCSR(m));
+ m->mccr0 |= MCCR0_MCE;
+ writel_relaxed(m->mccr0, MCCR0(m));
}
static void mcp_sa11x0_disable(struct mcp *mcp)
{
- Ser4MCCR0 &= ~MCCR0_MCE;
+ struct mcp_sa11x0 *m = priv(mcp);
+
+ m->mccr0 &= ~MCCR0_MCE;
+ writel_relaxed(m->mccr0, MCCR0(m));
}
/*
@@ -137,55 +155,64 @@ static struct mcp_ops mcp_sa11x0 = {
.disable = mcp_sa11x0_disable,
};
-static int mcp_sa11x0_probe(struct platform_device *pdev)
+static int mcp_sa11x0_probe(struct platform_device *dev)
{
- struct mcp_plat_data *data = pdev->dev.platform_data;
+ struct mcp_plat_data *data = dev->dev.platform_data;
+ struct resource *mem0, *mem1;
+ struct mcp_sa11x0 *m;
struct mcp *mcp;
int ret;
if (!data)
return -ENODEV;
- if (!request_mem_region(0x80060000, 0x60, "sa11x0-mcp"))
- return -EBUSY;
+ mem0 = platform_get_resource(dev, IORESOURCE_MEM, 0);
+ mem1 = platform_get_resource(dev, IORESOURCE_MEM, 1);
+ if (!mem0 || !mem1)
+ return -ENXIO;
+
+ if (!request_mem_region(mem0->start, resource_size(mem0),
+ DRIVER_NAME)) {
+ ret = -EBUSY;
+ goto err_mem0;
+ }
- mcp = mcp_host_alloc(&pdev->dev, sizeof(struct mcp_sa11x0));
+ if (!request_mem_region(mem1->start, resource_size(mem1),
+ DRIVER_NAME)) {
+ ret = -EBUSY;
+ goto err_mem1;
+ }
+
+ mcp = mcp_host_alloc(&dev->dev, sizeof(struct mcp_sa11x0));
if (!mcp) {
ret = -ENOMEM;
- goto release;
+ goto err_alloc;
}
mcp->owner = THIS_MODULE;
mcp->ops = &mcp_sa11x0;
mcp->sclk_rate = data->sclk_rate;
- mcp->dma_audio_rd = DMA_Ser4MCP0Rd;
- mcp->dma_audio_wr = DMA_Ser4MCP0Wr;
- mcp->dma_telco_rd = DMA_Ser4MCP1Rd;
- mcp->dma_telco_wr = DMA_Ser4MCP1Wr;
- mcp->gpio_base = data->gpio_base;
- platform_set_drvdata(pdev, mcp);
+ m = priv(mcp);
+ m->mccr0 = data->mccr0 | 0x7f7f;
+ m->mccr1 = data->mccr1;
- if (machine_is_assabet()) {
- ASSABET_BCR_set(ASSABET_BCR_CODEC_RST);
+ m->base0 = ioremap(mem0->start, resource_size(mem0));
+ m->base1 = ioremap(mem1->start, resource_size(mem1));
+ if (!m->base0 || !m->base1) {
+ ret = -ENOMEM;
+ goto err_ioremap;
}
- /*
- * Setup the PPC unit correctly.
- */
- PPDR &= ~PPC_RXD4;
- PPDR |= PPC_TXD4 | PPC_SCLK | PPC_SFRM;
- PSDR |= PPC_RXD4;
- PSDR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM);
- PPSR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM);
+ platform_set_drvdata(dev, mcp);
/*
* Initialise device. Note that we initially
* set the sampling rate to minimum.
*/
- Ser4MCSR = -1;
- Ser4MCCR1 = data->mccr1;
- Ser4MCCR0 = data->mccr0 | 0x7f7f;
+ writel_relaxed(-1, MCSR(m));
+ writel_relaxed(m->mccr1, MCCR1(m));
+ writel_relaxed(m->mccr0, MCCR0(m));
/*
* Calculate the read/write timeout (us) from the bit clock
@@ -195,62 +222,90 @@ static int mcp_sa11x0_probe(struct platform_device *pdev)
mcp->rw_timeout = (64 * 3 * 1000000 + mcp->sclk_rate - 1) /
mcp->sclk_rate;
- ret = mcp_host_register(mcp);
+ ret = mcp_host_add(mcp, data->codec_pdata);
if (ret == 0)
- goto out;
+ return 0;
- release:
- release_mem_region(0x80060000, 0x60);
- platform_set_drvdata(pdev, NULL);
+ platform_set_drvdata(dev, NULL);
- out:
+ err_ioremap:
+ iounmap(m->base1);
+ iounmap(m->base0);
+ mcp_host_free(mcp);
+ err_alloc:
+ release_mem_region(mem1->start, resource_size(mem1));
+ err_mem1:
+ release_mem_region(mem0->start, resource_size(mem0));
+ err_mem0:
return ret;
}
static int mcp_sa11x0_remove(struct platform_device *dev)
{
struct mcp *mcp = platform_get_drvdata(dev);
+ struct mcp_sa11x0 *m = priv(mcp);
+ struct resource *mem0, *mem1;
+
+ if (m->mccr0 & MCCR0_MCE)
+ dev_warn(&dev->dev,
+ "device left active (missing disable call?)\n");
+
+ mem0 = platform_get_resource(dev, IORESOURCE_MEM, 0);
+ mem1 = platform_get_resource(dev, IORESOURCE_MEM, 1);
platform_set_drvdata(dev, NULL);
- mcp_host_unregister(mcp);
- release_mem_region(0x80060000, 0x60);
+ mcp_host_del(mcp);
+ iounmap(m->base1);
+ iounmap(m->base0);
+ mcp_host_free(mcp);
+ release_mem_region(mem1->start, resource_size(mem1));
+ release_mem_region(mem0->start, resource_size(mem0));
return 0;
}
-static int mcp_sa11x0_suspend(struct platform_device *dev, pm_message_t state)
+#ifdef CONFIG_PM_SLEEP
+static int mcp_sa11x0_suspend(struct device *dev)
{
- struct mcp *mcp = platform_get_drvdata(dev);
+ struct mcp_sa11x0 *m = priv(dev_get_drvdata(dev));
+
+ if (m->mccr0 & MCCR0_MCE)
+ dev_warn(dev, "device left active (missing disable call?)\n");
- priv(mcp)->mccr0 = Ser4MCCR0;
- priv(mcp)->mccr1 = Ser4MCCR1;
- Ser4MCCR0 &= ~MCCR0_MCE;
+ writel(m->mccr0 & ~MCCR0_MCE, MCCR0(m));
return 0;
}
-static int mcp_sa11x0_resume(struct platform_device *dev)
+static int mcp_sa11x0_resume(struct device *dev)
{
- struct mcp *mcp = platform_get_drvdata(dev);
+ struct mcp_sa11x0 *m = priv(dev_get_drvdata(dev));
- Ser4MCCR1 = priv(mcp)->mccr1;
- Ser4MCCR0 = priv(mcp)->mccr0;
+ writel_relaxed(m->mccr1, MCCR1(m));
+ writel_relaxed(m->mccr0, MCCR0(m));
return 0;
}
-
-/*
- * The driver for the SA11x0 MCP port.
- */
-MODULE_ALIAS("platform:sa11x0-mcp");
+#endif
+
+static const struct dev_pm_ops mcp_sa11x0_pm_ops = {
+#ifdef CONFIG_PM_SLEEP
+ .suspend = mcp_sa11x0_suspend,
+ .freeze = mcp_sa11x0_suspend,
+ .poweroff = mcp_sa11x0_suspend,
+ .resume_noirq = mcp_sa11x0_resume,
+ .thaw_noirq = mcp_sa11x0_resume,
+ .restore_noirq = mcp_sa11x0_resume,
+#endif
+};
static struct platform_driver mcp_sa11x0_driver = {
.probe = mcp_sa11x0_probe,
.remove = mcp_sa11x0_remove,
- .suspend = mcp_sa11x0_suspend,
- .resume = mcp_sa11x0_resume,
.driver = {
- .name = "sa11x0-mcp",
+ .name = DRIVER_NAME,
+ .owner = THIS_MODULE,
+ .pm = &mcp_sa11x0_pm_ops,
},
};
@@ -259,6 +314,7 @@ static struct platform_driver mcp_sa11x0_driver = {
*/
module_platform_driver(mcp_sa11x0_driver);
+MODULE_ALIAS("platform:" DRIVER_NAME);
MODULE_AUTHOR("Russell King <rmk@arm.linux.org.uk>");
MODULE_DESCRIPTION("SA11x0 multimedia communications port driver");
MODULE_LICENSE("GPL");
diff --git a/drivers/mfd/ucb1x00-assabet.c b/drivers/mfd/ucb1x00-assabet.c
index cea9da60850..b63c0756a66 100644
--- a/drivers/mfd/ucb1x00-assabet.c
+++ b/drivers/mfd/ucb1x00-assabet.c
@@ -11,14 +11,15 @@
*/
#include <linux/module.h>
#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/err.h>
#include <linux/fs.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/platform_device.h>
#include <linux/proc_fs.h>
-#include <linux/device.h>
#include <linux/mfd/ucb1x00.h>
-#include <mach/dma.h>
-
-
#define UCB1X00_ATTR(name,input)\
static ssize_t name##_show(struct device *dev, struct device_attribute *attr, \
char *buf) \
@@ -38,14 +39,45 @@ UCB1X00_ATTR(batt_temp, UCB_ADC_INP_AD2);
static int ucb1x00_assabet_add(struct ucb1x00_dev *dev)
{
- device_create_file(&dev->ucb->dev, &dev_attr_vbatt);
- device_create_file(&dev->ucb->dev, &dev_attr_vcharger);
- device_create_file(&dev->ucb->dev, &dev_attr_batt_temp);
+ struct ucb1x00 *ucb = dev->ucb;
+ struct platform_device *pdev;
+ struct gpio_keys_platform_data keys;
+ static struct gpio_keys_button buttons[6];
+ unsigned i;
+
+ memset(buttons, 0, sizeof(buttons));
+ memset(&keys, 0, sizeof(keys));
+
+ for (i = 0; i < ARRAY_SIZE(buttons); i++) {
+ buttons[i].code = BTN_0 + i;
+ buttons[i].gpio = ucb->gpio.base + i;
+ buttons[i].type = EV_KEY;
+ buttons[i].can_disable = true;
+ }
+
+ keys.buttons = buttons;
+ keys.nbuttons = ARRAY_SIZE(buttons);
+ keys.poll_interval = 50;
+ keys.name = "ucb1x00";
+
+ pdev = platform_device_register_data(&ucb->dev, "gpio-keys", -1,
+ &keys, sizeof(keys));
+
+ device_create_file(&ucb->dev, &dev_attr_vbatt);
+ device_create_file(&ucb->dev, &dev_attr_vcharger);
+ device_create_file(&ucb->dev, &dev_attr_batt_temp);
+
+ dev->priv = pdev;
return 0;
}
static void ucb1x00_assabet_remove(struct ucb1x00_dev *dev)
{
+ struct platform_device *pdev = dev->priv;
+
+ if (!IS_ERR(pdev))
+ platform_device_unregister(pdev);
+
device_remove_file(&dev->ucb->dev, &dev_attr_batt_temp);
device_remove_file(&dev->ucb->dev, &dev_attr_vcharger);
device_remove_file(&dev->ucb->dev, &dev_attr_vbatt);
diff --git a/drivers/mfd/ucb1x00-core.c b/drivers/mfd/ucb1x00-core.c
index febc90cdef7..70f02daeb22 100644
--- a/drivers/mfd/ucb1x00-core.c
+++ b/drivers/mfd/ucb1x00-core.c
@@ -23,14 +23,12 @@
#include <linux/init.h>
#include <linux/errno.h>
#include <linux/interrupt.h>
+#include <linux/irq.h>
#include <linux/device.h>
#include <linux/mutex.h>
#include <linux/mfd/ucb1x00.h>
+#include <linux/pm.h>
#include <linux/gpio.h>
-#include <linux/semaphore.h>
-
-#include <mach/dma.h>
-#include <mach/hardware.h>
static DEFINE_MUTEX(ucb1x00_mutex);
static LIST_HEAD(ucb1x00_drivers);
@@ -102,7 +100,7 @@ void ucb1x00_io_write(struct ucb1x00 *ucb, unsigned int set, unsigned int clear)
* ucb1x00_enable must have been called to enable the comms
* before using this function.
*
- * This function does not take any semaphores or spinlocks.
+ * This function does not take any mutexes or spinlocks.
*/
unsigned int ucb1x00_io_read(struct ucb1x00 *ucb)
{
@@ -120,14 +118,22 @@ static void ucb1x00_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
else
ucb->io_out &= ~(1 << offset);
+ ucb1x00_enable(ucb);
ucb1x00_reg_write(ucb, UCB_IO_DATA, ucb->io_out);
+ ucb1x00_disable(ucb);
spin_unlock_irqrestore(&ucb->io_lock, flags);
}
static int ucb1x00_gpio_get(struct gpio_chip *chip, unsigned offset)
{
struct ucb1x00 *ucb = container_of(chip, struct ucb1x00, gpio);
- return ucb1x00_reg_read(ucb, UCB_IO_DATA) & (1 << offset);
+ unsigned val;
+
+ ucb1x00_enable(ucb);
+ val = ucb1x00_reg_read(ucb, UCB_IO_DATA);
+ ucb1x00_disable(ucb);
+
+ return val & (1 << offset);
}
static int ucb1x00_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
@@ -137,7 +143,9 @@ static int ucb1x00_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
spin_lock_irqsave(&ucb->io_lock, flags);
ucb->io_dir &= ~(1 << offset);
+ ucb1x00_enable(ucb);
ucb1x00_reg_write(ucb, UCB_IO_DIR, ucb->io_dir);
+ ucb1x00_disable(ucb);
spin_unlock_irqrestore(&ucb->io_lock, flags);
return 0;
@@ -157,6 +165,7 @@ static int ucb1x00_gpio_direction_output(struct gpio_chip *chip, unsigned offset
else
ucb->io_out &= ~mask;
+ ucb1x00_enable(ucb);
if (old != ucb->io_out)
ucb1x00_reg_write(ucb, UCB_IO_DATA, ucb->io_out);
@@ -164,11 +173,19 @@ static int ucb1x00_gpio_direction_output(struct gpio_chip *chip, unsigned offset
ucb->io_dir |= mask;
ucb1x00_reg_write(ucb, UCB_IO_DIR, ucb->io_dir);
}
+ ucb1x00_disable(ucb);
spin_unlock_irqrestore(&ucb->io_lock, flags);
return 0;
}
+static int ucb1x00_to_irq(struct gpio_chip *chip, unsigned offset)
+{
+ struct ucb1x00 *ucb = container_of(chip, struct ucb1x00, gpio);
+
+ return ucb->irq_base > 0 ? ucb->irq_base + offset : -ENXIO;
+}
+
/*
* UCB1300 data sheet says we must:
* 1. enable ADC => 5us (including reference startup time)
@@ -186,7 +203,7 @@ static int ucb1x00_gpio_direction_output(struct gpio_chip *chip, unsigned offset
* Any code wishing to use the ADC converter must call this
* function prior to using it.
*
- * This function takes the ADC semaphore to prevent two or more
+ * This function takes the ADC mutex to prevent two or more
* concurrent uses, and therefore may sleep. As a result, it
* can only be called from process context, not interrupt
* context.
@@ -196,7 +213,7 @@ static int ucb1x00_gpio_direction_output(struct gpio_chip *chip, unsigned offset
*/
void ucb1x00_adc_enable(struct ucb1x00 *ucb)
{
- down(&ucb->adc_sem);
+ mutex_lock(&ucb->adc_mutex);
ucb->adc_cr |= UCB_ADC_ENA;
@@ -218,7 +235,7 @@ void ucb1x00_adc_enable(struct ucb1x00 *ucb)
* complete (2 frames max without sync).
*
* If called for a synchronised ADC conversion, it may sleep
- * with the ADC semaphore held.
+ * with the ADC mutex held.
*/
unsigned int ucb1x00_adc_read(struct ucb1x00 *ucb, int adc_channel, int sync)
{
@@ -246,7 +263,7 @@ unsigned int ucb1x00_adc_read(struct ucb1x00 *ucb, int adc_channel, int sync)
* ucb1x00_adc_disable - disable the ADC converter
* @ucb: UCB1x00 structure describing chip
*
- * Disable the ADC converter and release the ADC semaphore.
+ * Disable the ADC converter and release the ADC mutex.
*/
void ucb1x00_adc_disable(struct ucb1x00 *ucb)
{
@@ -254,7 +271,7 @@ void ucb1x00_adc_disable(struct ucb1x00 *ucb)
ucb1x00_reg_write(ucb, UCB_ADC_CR, ucb->adc_cr);
ucb1x00_disable(ucb);
- up(&ucb->adc_sem);
+ mutex_unlock(&ucb->adc_mutex);
}
/*
@@ -265,10 +282,9 @@ void ucb1x00_adc_disable(struct ucb1x00 *ucb)
* SIBCLK to talk to the chip. We leave the clock running until
* we have finished processing all interrupts from the chip.
*/
-static irqreturn_t ucb1x00_irq(int irqnr, void *devid)
+static void ucb1x00_irq(unsigned int irq, struct irq_desc *desc)
{
- struct ucb1x00 *ucb = devid;
- struct ucb1x00_irq *irq;
+ struct ucb1x00 *ucb = irq_desc_get_handler_data(desc);
unsigned int isr, i;
ucb1x00_enable(ucb);
@@ -276,157 +292,104 @@ static irqreturn_t ucb1x00_irq(int irqnr, void *devid)
ucb1x00_reg_write(ucb, UCB_IE_CLEAR, isr);
ucb1x00_reg_write(ucb, UCB_IE_CLEAR, 0);
- for (i = 0, irq = ucb->irq_handler; i < 16 && isr; i++, isr >>= 1, irq++)
- if (isr & 1 && irq->fn)
- irq->fn(i, irq->devid);
+ for (i = 0; i < 16 && isr; i++, isr >>= 1, irq++)
+ if (isr & 1)
+ generic_handle_irq(ucb->irq_base + i);
ucb1x00_disable(ucb);
-
- return IRQ_HANDLED;
}
-/**
- * ucb1x00_hook_irq - hook a UCB1x00 interrupt
- * @ucb: UCB1x00 structure describing chip
- * @idx: interrupt index
- * @fn: function to call when interrupt is triggered
- * @devid: device id to pass to interrupt handler
- *
- * Hook the specified interrupt. You can only register one handler
- * for each interrupt source. The interrupt source is not enabled
- * by this function; use ucb1x00_enable_irq instead.
- *
- * Interrupt handlers will be called with other interrupts enabled.
- *
- * Returns zero on success, or one of the following errors:
- * -EINVAL if the interrupt index is invalid
- * -EBUSY if the interrupt has already been hooked
- */
-int ucb1x00_hook_irq(struct ucb1x00 *ucb, unsigned int idx, void (*fn)(int, void *), void *devid)
+static void ucb1x00_irq_update(struct ucb1x00 *ucb, unsigned mask)
{
- struct ucb1x00_irq *irq;
- int ret = -EINVAL;
-
- if (idx < 16) {
- irq = ucb->irq_handler + idx;
- ret = -EBUSY;
-
- spin_lock_irq(&ucb->lock);
- if (irq->fn == NULL) {
- irq->devid = devid;
- irq->fn = fn;
- ret = 0;
- }
- spin_unlock_irq(&ucb->lock);
- }
- return ret;
+ ucb1x00_enable(ucb);
+ if (ucb->irq_ris_enbl & mask)
+ ucb1x00_reg_write(ucb, UCB_IE_RIS, ucb->irq_ris_enbl &
+ ucb->irq_mask);
+ if (ucb->irq_fal_enbl & mask)
+ ucb1x00_reg_write(ucb, UCB_IE_FAL, ucb->irq_fal_enbl &
+ ucb->irq_mask);
+ ucb1x00_disable(ucb);
}
-/**
- * ucb1x00_enable_irq - enable an UCB1x00 interrupt source
- * @ucb: UCB1x00 structure describing chip
- * @idx: interrupt index
- * @edges: interrupt edges to enable
- *
- * Enable the specified interrupt to trigger on %UCB_RISING,
- * %UCB_FALLING or both edges. The interrupt should have been
- * hooked by ucb1x00_hook_irq.
- */
-void ucb1x00_enable_irq(struct ucb1x00 *ucb, unsigned int idx, int edges)
+static void ucb1x00_irq_noop(struct irq_data *data)
{
- unsigned long flags;
+}
- if (idx < 16) {
- spin_lock_irqsave(&ucb->lock, flags);
+static void ucb1x00_irq_mask(struct irq_data *data)
+{
+ struct ucb1x00 *ucb = irq_data_get_irq_chip_data(data);
+ unsigned mask = 1 << (data->irq - ucb->irq_base);
- ucb1x00_enable(ucb);
- if (edges & UCB_RISING) {
- ucb->irq_ris_enbl |= 1 << idx;
- ucb1x00_reg_write(ucb, UCB_IE_RIS, ucb->irq_ris_enbl);
- }
- if (edges & UCB_FALLING) {
- ucb->irq_fal_enbl |= 1 << idx;
- ucb1x00_reg_write(ucb, UCB_IE_FAL, ucb->irq_fal_enbl);
- }
- ucb1x00_disable(ucb);
- spin_unlock_irqrestore(&ucb->lock, flags);
- }
+ raw_spin_lock(&ucb->irq_lock);
+ ucb->irq_mask &= ~mask;
+ ucb1x00_irq_update(ucb, mask);
+ raw_spin_unlock(&ucb->irq_lock);
}
-/**
- * ucb1x00_disable_irq - disable an UCB1x00 interrupt source
- * @ucb: UCB1x00 structure describing chip
- * @edges: interrupt edges to disable
- *
- * Disable the specified interrupt triggering on the specified
- * (%UCB_RISING, %UCB_FALLING or both) edges.
- */
-void ucb1x00_disable_irq(struct ucb1x00 *ucb, unsigned int idx, int edges)
+static void ucb1x00_irq_unmask(struct irq_data *data)
{
- unsigned long flags;
+ struct ucb1x00 *ucb = irq_data_get_irq_chip_data(data);
+ unsigned mask = 1 << (data->irq - ucb->irq_base);
- if (idx < 16) {
- spin_lock_irqsave(&ucb->lock, flags);
-
- ucb1x00_enable(ucb);
- if (edges & UCB_RISING) {
- ucb->irq_ris_enbl &= ~(1 << idx);
- ucb1x00_reg_write(ucb, UCB_IE_RIS, ucb->irq_ris_enbl);
- }
- if (edges & UCB_FALLING) {
- ucb->irq_fal_enbl &= ~(1 << idx);
- ucb1x00_reg_write(ucb, UCB_IE_FAL, ucb->irq_fal_enbl);
- }
- ucb1x00_disable(ucb);
- spin_unlock_irqrestore(&ucb->lock, flags);
- }
+ raw_spin_lock(&ucb->irq_lock);
+ ucb->irq_mask |= mask;
+ ucb1x00_irq_update(ucb, mask);
+ raw_spin_unlock(&ucb->irq_lock);
}
-/**
- * ucb1x00_free_irq - disable and free the specified UCB1x00 interrupt
- * @ucb: UCB1x00 structure describing chip
- * @idx: interrupt index
- * @devid: device id.
- *
- * Disable the interrupt source and remove the handler. devid must
- * match the devid passed when hooking the interrupt.
- *
- * Returns zero on success, or one of the following errors:
- * -EINVAL if the interrupt index is invalid
- * -ENOENT if devid does not match
- */
-int ucb1x00_free_irq(struct ucb1x00 *ucb, unsigned int idx, void *devid)
+static int ucb1x00_irq_set_type(struct irq_data *data, unsigned int type)
{
- struct ucb1x00_irq *irq;
- int ret;
+ struct ucb1x00 *ucb = irq_data_get_irq_chip_data(data);
+ unsigned mask = 1 << (data->irq - ucb->irq_base);
- if (idx >= 16)
- goto bad;
+ raw_spin_lock(&ucb->irq_lock);
+ if (type & IRQ_TYPE_EDGE_RISING)
+ ucb->irq_ris_enbl |= mask;
+ else
+ ucb->irq_ris_enbl &= ~mask;
- irq = ucb->irq_handler + idx;
- ret = -ENOENT;
+ if (type & IRQ_TYPE_EDGE_FALLING)
+ ucb->irq_fal_enbl |= mask;
+ else
+ ucb->irq_fal_enbl &= ~mask;
+ if (ucb->irq_mask & mask) {
+ ucb1x00_reg_write(ucb, UCB_IE_RIS, ucb->irq_ris_enbl &
+ ucb->irq_mask);
+ ucb1x00_reg_write(ucb, UCB_IE_FAL, ucb->irq_fal_enbl &
+ ucb->irq_mask);
+ }
+ raw_spin_unlock(&ucb->irq_lock);
- spin_lock_irq(&ucb->lock);
- if (irq->devid == devid) {
- ucb->irq_ris_enbl &= ~(1 << idx);
- ucb->irq_fal_enbl &= ~(1 << idx);
+ return 0;
+}
- ucb1x00_enable(ucb);
- ucb1x00_reg_write(ucb, UCB_IE_RIS, ucb->irq_ris_enbl);
- ucb1x00_reg_write(ucb, UCB_IE_FAL, ucb->irq_fal_enbl);
- ucb1x00_disable(ucb);
+static int ucb1x00_irq_set_wake(struct irq_data *data, unsigned int on)
+{
+ struct ucb1x00 *ucb = irq_data_get_irq_chip_data(data);
+ struct ucb1x00_plat_data *pdata = ucb->mcp->attached_device.platform_data;
+ unsigned mask = 1 << (data->irq - ucb->irq_base);
- irq->fn = NULL;
- irq->devid = NULL;
- ret = 0;
- }
- spin_unlock_irq(&ucb->lock);
- return ret;
+ if (!pdata || !pdata->can_wakeup)
+ return -EINVAL;
-bad:
- printk(KERN_ERR "Freeing bad UCB1x00 irq %d\n", idx);
- return -EINVAL;
+ raw_spin_lock(&ucb->irq_lock);
+ if (on)
+ ucb->irq_wake |= mask;
+ else
+ ucb->irq_wake &= ~mask;
+ raw_spin_unlock(&ucb->irq_lock);
+
+ return 0;
}
+static struct irq_chip ucb1x00_irqchip = {
+ .name = "ucb1x00",
+ .irq_ack = ucb1x00_irq_noop,
+ .irq_mask = ucb1x00_irq_mask,
+ .irq_unmask = ucb1x00_irq_unmask,
+ .irq_set_type = ucb1x00_irq_set_type,
+ .irq_set_wake = ucb1x00_irq_set_wake,
+};
+
static int ucb1x00_add_dev(struct ucb1x00 *ucb, struct ucb1x00_driver *drv)
{
struct ucb1x00_dev *dev;
@@ -440,8 +403,8 @@ static int ucb1x00_add_dev(struct ucb1x00 *ucb, struct ucb1x00_driver *drv)
ret = drv->add(dev);
if (ret == 0) {
- list_add(&dev->dev_node, &ucb->devs);
- list_add(&dev->drv_node, &drv->devs);
+ list_add_tail(&dev->dev_node, &ucb->devs);
+ list_add_tail(&dev->drv_node, &drv->devs);
} else {
kfree(dev);
}
@@ -533,98 +496,126 @@ static struct class ucb1x00_class = {
static int ucb1x00_probe(struct mcp *mcp)
{
- struct ucb1x00 *ucb;
+ struct ucb1x00_plat_data *pdata = mcp->attached_device.platform_data;
struct ucb1x00_driver *drv;
- unsigned int id;
+ struct ucb1x00 *ucb;
+ unsigned id, i, irq_base;
int ret = -ENODEV;
- int temp;
+
+ /* Tell the platform to deassert the UCB1x00 reset */
+ if (pdata && pdata->reset)
+ pdata->reset(UCB_RST_PROBE);
mcp_enable(mcp);
id = mcp_reg_read(mcp, UCB_ID);
+ mcp_disable(mcp);
if (id != UCB_ID_1200 && id != UCB_ID_1300 && id != UCB_ID_TC35143) {
printk(KERN_WARNING "UCB1x00 ID not found: %04x\n", id);
- goto err_disable;
+ goto out;
}
ucb = kzalloc(sizeof(struct ucb1x00), GFP_KERNEL);
ret = -ENOMEM;
if (!ucb)
- goto err_disable;
-
+ goto out;
+ device_initialize(&ucb->dev);
ucb->dev.class = &ucb1x00_class;
ucb->dev.parent = &mcp->attached_device;
dev_set_name(&ucb->dev, "ucb1x00");
- spin_lock_init(&ucb->lock);
+ raw_spin_lock_init(&ucb->irq_lock);
spin_lock_init(&ucb->io_lock);
- sema_init(&ucb->adc_sem, 1);
+ mutex_init(&ucb->adc_mutex);
ucb->id = id;
ucb->mcp = mcp;
+
+ ret = device_add(&ucb->dev);
+ if (ret)
+ goto err_dev_add;
+
+ ucb1x00_enable(ucb);
ucb->irq = ucb1x00_detect_irq(ucb);
+ ucb1x00_disable(ucb);
if (ucb->irq == NO_IRQ) {
- printk(KERN_ERR "UCB1x00: IRQ probe failed\n");
+ dev_err(&ucb->dev, "IRQ probe failed\n");
ret = -ENODEV;
- goto err_free;
+ goto err_no_irq;
}
ucb->gpio.base = -1;
- if (mcp->gpio_base != 0) {
+ irq_base = pdata ? pdata->irq_base : 0;
+ ucb->irq_base = irq_alloc_descs(-1, irq_base, 16, -1);
+ if (ucb->irq_base < 0) {
+ dev_err(&ucb->dev, "unable to allocate 16 irqs: %d\n",
+ ucb->irq_base);
+ goto err_irq_alloc;
+ }
+
+ for (i = 0; i < 16; i++) {
+ unsigned irq = ucb->irq_base + i;
+
+ irq_set_chip_and_handler(irq, &ucb1x00_irqchip, handle_edge_irq);
+ irq_set_chip_data(irq, ucb);
+ set_irq_flags(irq, IRQF_VALID | IRQ_NOREQUEST);
+ }
+
+ irq_set_irq_type(ucb->irq, IRQ_TYPE_EDGE_RISING);
+ irq_set_handler_data(ucb->irq, ucb);
+ irq_set_chained_handler(ucb->irq, ucb1x00_irq);
+
+ if (pdata && pdata->gpio_base) {
ucb->gpio.label = dev_name(&ucb->dev);
- ucb->gpio.base = mcp->gpio_base;
+ ucb->gpio.dev = &ucb->dev;
+ ucb->gpio.owner = THIS_MODULE;
+ ucb->gpio.base = pdata->gpio_base;
ucb->gpio.ngpio = 10;
ucb->gpio.set = ucb1x00_gpio_set;
ucb->gpio.get = ucb1x00_gpio_get;
ucb->gpio.direction_input = ucb1x00_gpio_direction_input;
ucb->gpio.direction_output = ucb1x00_gpio_direction_output;
+ ucb->gpio.to_irq = ucb1x00_to_irq;
ret = gpiochip_add(&ucb->gpio);
if (ret)
- goto err_free;
+ goto err_gpio_add;
} else
dev_info(&ucb->dev, "gpio_base not set so no gpiolib support");
- ret = request_irq(ucb->irq, ucb1x00_irq, IRQF_TRIGGER_RISING,
- "UCB1x00", ucb);
- if (ret) {
- printk(KERN_ERR "ucb1x00: unable to grab irq%d: %d\n",
- ucb->irq, ret);
- goto err_gpio;
- }
-
mcp_set_drvdata(mcp, ucb);
- ret = device_register(&ucb->dev);
- if (ret)
- goto err_irq;
-
+ if (pdata)
+ device_set_wakeup_capable(&ucb->dev, pdata->can_wakeup);
INIT_LIST_HEAD(&ucb->devs);
mutex_lock(&ucb1x00_mutex);
- list_add(&ucb->node, &ucb1x00_devices);
+ list_add_tail(&ucb->node, &ucb1x00_devices);
list_for_each_entry(drv, &ucb1x00_drivers, node) {
ucb1x00_add_dev(ucb, drv);
}
mutex_unlock(&ucb1x00_mutex);
- goto out;
+ return ret;
- err_irq:
- free_irq(ucb->irq, ucb);
- err_gpio:
- if (ucb->gpio.base != -1)
- temp = gpiochip_remove(&ucb->gpio);
- err_free:
- kfree(ucb);
- err_disable:
- mcp_disable(mcp);
+ err_gpio_add:
+ irq_set_chained_handler(ucb->irq, NULL);
+ err_irq_alloc:
+ if (ucb->irq_base > 0)
+ irq_free_descs(ucb->irq_base, 16);
+ err_no_irq:
+ device_del(&ucb->dev);
+ err_dev_add:
+ put_device(&ucb->dev);
out:
+ if (pdata && pdata->reset)
+ pdata->reset(UCB_RST_PROBE_FAIL);
return ret;
}
static void ucb1x00_remove(struct mcp *mcp)
{
+ struct ucb1x00_plat_data *pdata = mcp->attached_device.platform_data;
struct ucb1x00 *ucb = mcp_get_drvdata(mcp);
struct list_head *l, *n;
int ret;
@@ -643,8 +634,12 @@ static void ucb1x00_remove(struct mcp *mcp)
dev_err(&ucb->dev, "Can't remove gpio chip: %d\n", ret);
}
- free_irq(ucb->irq, ucb);
+ irq_set_chained_handler(ucb->irq, NULL);
+ irq_free_descs(ucb->irq_base, 16);
device_unregister(&ucb->dev);
+
+ if (pdata && pdata->reset)
+ pdata->reset(UCB_RST_REMOVE);
}
int ucb1x00_register_driver(struct ucb1x00_driver *drv)
@@ -653,7 +648,7 @@ int ucb1x00_register_driver(struct ucb1x00_driver *drv)
INIT_LIST_HEAD(&drv->devs);
mutex_lock(&ucb1x00_mutex);
- list_add(&drv->node, &ucb1x00_drivers);
+ list_add_tail(&drv->node, &ucb1x00_drivers);
list_for_each_entry(ucb, &ucb1x00_devices, node) {
ucb1x00_add_dev(ucb, drv);
}
@@ -674,44 +669,86 @@ void ucb1x00_unregister_driver(struct ucb1x00_driver *drv)
mutex_unlock(&ucb1x00_mutex);
}
-static int ucb1x00_suspend(struct mcp *mcp, pm_message_t state)
+static int ucb1x00_suspend(struct device *dev)
{
- struct ucb1x00 *ucb = mcp_get_drvdata(mcp);
- struct ucb1x00_dev *dev;
+ struct ucb1x00_plat_data *pdata = dev->platform_data;
+ struct ucb1x00 *ucb = dev_get_drvdata(dev);
+ struct ucb1x00_dev *udev;
mutex_lock(&ucb1x00_mutex);
- list_for_each_entry(dev, &ucb->devs, dev_node) {
- if (dev->drv->suspend)
- dev->drv->suspend(dev, state);
+ list_for_each_entry(udev, &ucb->devs, dev_node) {
+ if (udev->drv->suspend)
+ udev->drv->suspend(udev);
}
mutex_unlock(&ucb1x00_mutex);
+
+ if (ucb->irq_wake) {
+ unsigned long flags;
+
+ raw_spin_lock_irqsave(&ucb->irq_lock, flags);
+ ucb1x00_enable(ucb);
+ ucb1x00_reg_write(ucb, UCB_IE_RIS, ucb->irq_ris_enbl &
+ ucb->irq_wake);
+ ucb1x00_reg_write(ucb, UCB_IE_FAL, ucb->irq_fal_enbl &
+ ucb->irq_wake);
+ ucb1x00_disable(ucb);
+ raw_spin_unlock_irqrestore(&ucb->irq_lock, flags);
+
+ enable_irq_wake(ucb->irq);
+ } else if (pdata && pdata->reset)
+ pdata->reset(UCB_RST_SUSPEND);
+
return 0;
}
-static int ucb1x00_resume(struct mcp *mcp)
+static int ucb1x00_resume(struct device *dev)
{
- struct ucb1x00 *ucb = mcp_get_drvdata(mcp);
- struct ucb1x00_dev *dev;
+ struct ucb1x00_plat_data *pdata = dev->platform_data;
+ struct ucb1x00 *ucb = dev_get_drvdata(dev);
+ struct ucb1x00_dev *udev;
+
+ if (!ucb->irq_wake && pdata && pdata->reset)
+ pdata->reset(UCB_RST_RESUME);
+ ucb1x00_enable(ucb);
ucb1x00_reg_write(ucb, UCB_IO_DATA, ucb->io_out);
ucb1x00_reg_write(ucb, UCB_IO_DIR, ucb->io_dir);
+
+ if (ucb->irq_wake) {
+ unsigned long flags;
+
+ raw_spin_lock_irqsave(&ucb->irq_lock, flags);
+ ucb1x00_reg_write(ucb, UCB_IE_RIS, ucb->irq_ris_enbl &
+ ucb->irq_mask);
+ ucb1x00_reg_write(ucb, UCB_IE_FAL, ucb->irq_fal_enbl &
+ ucb->irq_mask);
+ raw_spin_unlock_irqrestore(&ucb->irq_lock, flags);
+
+ disable_irq_wake(ucb->irq);
+ }
+ ucb1x00_disable(ucb);
+
mutex_lock(&ucb1x00_mutex);
- list_for_each_entry(dev, &ucb->devs, dev_node) {
- if (dev->drv->resume)
- dev->drv->resume(dev);
+ list_for_each_entry(udev, &ucb->devs, dev_node) {
+ if (udev->drv->resume)
+ udev->drv->resume(udev);
}
mutex_unlock(&ucb1x00_mutex);
return 0;
}
+static const struct dev_pm_ops ucb1x00_pm_ops = {
+ SET_SYSTEM_SLEEP_PM_OPS(ucb1x00_suspend, ucb1x00_resume)
+};
+
static struct mcp_driver ucb1x00_driver = {
.drv = {
.name = "ucb1x00",
+ .owner = THIS_MODULE,
+ .pm = &ucb1x00_pm_ops,
},
.probe = ucb1x00_probe,
.remove = ucb1x00_remove,
- .suspend = ucb1x00_suspend,
- .resume = ucb1x00_resume,
};
static int __init ucb1x00_init(void)
@@ -742,14 +779,10 @@ EXPORT_SYMBOL(ucb1x00_adc_enable);
EXPORT_SYMBOL(ucb1x00_adc_read);
EXPORT_SYMBOL(ucb1x00_adc_disable);
-EXPORT_SYMBOL(ucb1x00_hook_irq);
-EXPORT_SYMBOL(ucb1x00_free_irq);
-EXPORT_SYMBOL(ucb1x00_enable_irq);
-EXPORT_SYMBOL(ucb1x00_disable_irq);
-
EXPORT_SYMBOL(ucb1x00_register_driver);
EXPORT_SYMBOL(ucb1x00_unregister_driver);
+MODULE_ALIAS("mcp:ucb1x00");
MODULE_AUTHOR("Russell King <rmk@arm.linux.org.uk>");
MODULE_DESCRIPTION("UCB1x00 core driver");
MODULE_LICENSE("GPL");
diff --git a/drivers/mfd/ucb1x00-ts.c b/drivers/mfd/ucb1x00-ts.c
index 63a3cbdfa3f..1e0e20c0e08 100644
--- a/drivers/mfd/ucb1x00-ts.c
+++ b/drivers/mfd/ucb1x00-ts.c
@@ -20,8 +20,9 @@
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/init.h>
-#include <linux/smp.h>
+#include <linux/interrupt.h>
#include <linux/sched.h>
+#include <linux/spinlock.h>
#include <linux/completion.h>
#include <linux/delay.h>
#include <linux/string.h>
@@ -32,7 +33,6 @@
#include <linux/kthread.h>
#include <linux/mfd/ucb1x00.h>
-#include <mach/dma.h>
#include <mach/collie.h>
#include <asm/mach-types.h>
@@ -42,6 +42,8 @@ struct ucb1x00_ts {
struct input_dev *idev;
struct ucb1x00 *ucb;
+ spinlock_t irq_lock;
+ unsigned irq_disabled;
wait_queue_head_t irq_wait;
struct task_struct *rtask;
u16 x_res;
@@ -238,7 +240,12 @@ static int ucb1x00_thread(void *_ts)
if (ucb1x00_ts_pen_down(ts)) {
set_current_state(TASK_INTERRUPTIBLE);
- ucb1x00_enable_irq(ts->ucb, UCB_IRQ_TSPX, machine_is_collie() ? UCB_RISING : UCB_FALLING);
+ spin_lock_irq(&ts->irq_lock);
+ if (ts->irq_disabled) {
+ ts->irq_disabled = 0;
+ enable_irq(ts->ucb->irq_base + UCB_IRQ_TSPX);
+ }
+ spin_unlock_irq(&ts->irq_lock);
ucb1x00_disable(ts->ucb);
/*
@@ -281,23 +288,37 @@ static int ucb1x00_thread(void *_ts)
* We only detect touch screen _touches_ with this interrupt
* handler, and even then we just schedule our task.
*/
-static void ucb1x00_ts_irq(int idx, void *id)
+static irqreturn_t ucb1x00_ts_irq(int irq, void *id)
{
struct ucb1x00_ts *ts = id;
- ucb1x00_disable_irq(ts->ucb, UCB_IRQ_TSPX, UCB_FALLING);
+ spin_lock(&ts->irq_lock);
+ ts->irq_disabled = 1;
+ disable_irq_nosync(ts->ucb->irq_base + UCB_IRQ_TSPX);
+ spin_unlock(&ts->irq_lock);
wake_up(&ts->irq_wait);
+
+ return IRQ_HANDLED;
}
static int ucb1x00_ts_open(struct input_dev *idev)
{
struct ucb1x00_ts *ts = input_get_drvdata(idev);
+ unsigned long flags = 0;
int ret = 0;
BUG_ON(ts->rtask);
+ if (machine_is_collie())
+ flags = IRQF_TRIGGER_RISING;
+ else
+ flags = IRQF_TRIGGER_FALLING;
+
+ ts->irq_disabled = 0;
+
init_waitqueue_head(&ts->irq_wait);
- ret = ucb1x00_hook_irq(ts->ucb, UCB_IRQ_TSPX, ucb1x00_ts_irq, ts);
+ ret = request_irq(ts->ucb->irq_base + UCB_IRQ_TSPX, ucb1x00_ts_irq,
+ flags, "ucb1x00-ts", ts);
if (ret < 0)
goto out;
@@ -314,7 +335,7 @@ static int ucb1x00_ts_open(struct input_dev *idev)
if (!IS_ERR(ts->rtask)) {
ret = 0;
} else {
- ucb1x00_free_irq(ts->ucb, UCB_IRQ_TSPX, ts);
+ free_irq(ts->ucb->irq_base + UCB_IRQ_TSPX, ts);
ts->rtask = NULL;
ret = -EFAULT;
}
@@ -334,7 +355,7 @@ static void ucb1x00_ts_close(struct input_dev *idev)
kthread_stop(ts->rtask);
ucb1x00_enable(ts->ucb);
- ucb1x00_free_irq(ts->ucb, UCB_IRQ_TSPX, ts);
+ free_irq(ts->ucb->irq_base + UCB_IRQ_TSPX, ts);
ucb1x00_reg_write(ts->ucb, UCB_TS_CR, 0);
ucb1x00_disable(ts->ucb);
}
@@ -359,11 +380,13 @@ static int ucb1x00_ts_add(struct ucb1x00_dev *dev)
ts->ucb = dev->ucb;
ts->idev = idev;
ts->adcsync = adcsync ? UCB_SYNC : UCB_NOSYNC;
+ spin_lock_init(&ts->irq_lock);
idev->name = "Touchscreen panel";
idev->id.product = ts->ucb->id;
idev->open = ucb1x00_ts_open;
idev->close = ucb1x00_ts_close;
+ idev->dev.parent = &ts->ucb->dev;
idev->evbit[0] = BIT_MASK(EV_ABS) | BIT_MASK(EV_KEY);
idev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
diff --git a/drivers/mtd/maps/sa1100-flash.c b/drivers/mtd/maps/sa1100-flash.c
index 50282199770..cbc3b786791 100644
--- a/drivers/mtd/maps/sa1100-flash.c
+++ b/drivers/mtd/maps/sa1100-flash.c
@@ -23,106 +23,6 @@
#include <asm/sizes.h>
#include <asm/mach/flash.h>
-#if 0
-/*
- * This is here for documentation purposes only - until these people
- * submit their machine types. It will be gone January 2005.
- */
-static struct mtd_partition consus_partitions[] = {
- {
- .name = "Consus boot firmware",
- .offset = 0,
- .size = 0x00040000,
- .mask_flags = MTD_WRITABLE, /* force read-only */
- }, {
- .name = "Consus kernel",
- .offset = 0x00040000,
- .size = 0x00100000,
- .mask_flags = 0,
- }, {
- .name = "Consus disk",
- .offset = 0x00140000,
- /* The rest (up to 16M) for jffs. We could put 0 and
- make it find the size automatically, but right now
- i have 32 megs. jffs will use all 32 megs if given
- the chance, and this leads to horrible problems
- when you try to re-flash the image because blob
- won't erase the whole partition. */
- .size = 0x01000000 - 0x00140000,
- .mask_flags = 0,
- }, {
- /* this disk is a secondary disk, which can be used as
- needed, for simplicity, make it the size of the other
- consus partition, although realistically it could be
- the remainder of the disk (depending on the file
- system used) */
- .name = "Consus disk2",
- .offset = 0x01000000,
- .size = 0x01000000 - 0x00140000,
- .mask_flags = 0,
- }
-};
-
-/* Frodo has 2 x 16M 28F128J3A flash chips in bank 0: */
-static struct mtd_partition frodo_partitions[] =
-{
- {
- .name = "bootloader",
- .size = 0x00040000,
- .offset = 0x00000000,
- .mask_flags = MTD_WRITEABLE
- }, {
- .name = "bootloader params",
- .size = 0x00040000,
- .offset = MTDPART_OFS_APPEND,
- .mask_flags = MTD_WRITEABLE
- }, {
- .name = "kernel",
- .size = 0x00100000,
- .offset = MTDPART_OFS_APPEND,
- .mask_flags = MTD_WRITEABLE
- }, {
- .name = "ramdisk",
- .size = 0x00400000,
- .offset = MTDPART_OFS_APPEND,
- .mask_flags = MTD_WRITEABLE
- }, {
- .name = "file system",
- .size = MTDPART_SIZ_FULL,
- .offset = MTDPART_OFS_APPEND
- }
-};
-
-static struct mtd_partition jornada56x_partitions[] = {
- {
- .name = "bootldr",
- .size = 0x00040000,
- .offset = 0,
- .mask_flags = MTD_WRITEABLE,
- }, {
- .name = "rootfs",
- .size = MTDPART_SIZ_FULL,
- .offset = MTDPART_OFS_APPEND,
- }
-};
-
-static void jornada56x_set_vpp(int vpp)
-{
- if (vpp)
- GPSR = GPIO_GPIO26;
- else
- GPCR = GPIO_GPIO26;
- GPDR |= GPIO_GPIO26;
-}
-
-/*
- * Machine Phys Size set_vpp
- * Consus : SA1100_CS0_PHYS SZ_32M
- * Frodo : SA1100_CS0_PHYS SZ_32M
- * Jornada56x: SA1100_CS0_PHYS SZ_32M jornada56x_set_vpp
- */
-#endif
-
struct sa_subdev_info {
char name[16];
struct map_info map;
@@ -373,21 +273,9 @@ static int __exit sa1100_mtd_remove(struct platform_device *pdev)
return 0;
}
-#ifdef CONFIG_PM
-static void sa1100_mtd_shutdown(struct platform_device *dev)
-{
- struct sa_info *info = platform_get_drvdata(dev);
- if (info && mtd_suspend(info->mtd) == 0)
- mtd_resume(info->mtd);
-}
-#else
-#define sa1100_mtd_shutdown NULL
-#endif
-
static struct platform_driver sa1100_mtd_driver = {
.probe = sa1100_mtd_probe,
.remove = __exit_p(sa1100_mtd_remove),
- .shutdown = sa1100_mtd_shutdown,
.driver = {
.name = "sa1100-mtd",
.owner = THIS_MODULE,
diff --git a/drivers/net/ethernet/smsc/smc91x.c b/drivers/net/ethernet/smsc/smc91x.c
index 1dc4fad593e..fee44935501 100644
--- a/drivers/net/ethernet/smsc/smc91x.c
+++ b/drivers/net/ethernet/smsc/smc91x.c
@@ -2280,7 +2280,7 @@ static int __devinit smc_drv_probe(struct platform_device *pdev)
if (ret)
goto out_release_io;
#if defined(CONFIG_SA1100_ASSABET)
- NCR_0 |= NCR_ENET_OSC_EN;
+ neponset_ncr_set(NCR_ENET_OSC_EN);
#endif
platform_set_drvdata(pdev, ndev);
ret = smc_enable_device(pdev);
diff --git a/drivers/net/irda/Kconfig b/drivers/net/irda/Kconfig
index e535137eb2d..468047866c8 100644
--- a/drivers/net/irda/Kconfig
+++ b/drivers/net/irda/Kconfig
@@ -356,7 +356,7 @@ config VLSI_FIR
config SA1100_FIR
tristate "SA1100 Internal IR"
- depends on ARCH_SA1100 && IRDA
+ depends on ARCH_SA1100 && IRDA && DMA_SA11X0
config VIA_FIR
tristate "VIA VT8231/VT1211 SIR/MIR/FIR"
diff --git a/drivers/net/irda/sa1100_ir.c b/drivers/net/irda/sa1100_ir.c
index da2705061a6..a0d1913a58d 100644
--- a/drivers/net/irda/sa1100_ir.c
+++ b/drivers/net/irda/sa1100_ir.c
@@ -15,7 +15,7 @@
* This driver takes one kernel command line parameter, sa1100ir=, with
* the following options:
* max_rate:baudrate - set the maximum baud rate
- * power_leve:level - set the transmitter power level
+ * power_level:level - set the transmitter power level
* tx_lpm:0|1 - set transmit low power mode
*/
#include <linux/module.h>
@@ -30,13 +30,13 @@
#include <linux/delay.h>
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
+#include <linux/dmaengine.h>
+#include <linux/sa11x0-dma.h>
#include <net/irda/irda.h>
#include <net/irda/wrapper.h>
#include <net/irda/irda_device.h>
-#include <asm/irq.h>
-#include <mach/dma.h>
#include <mach/hardware.h>
#include <asm/mach/irda.h>
@@ -44,8 +44,15 @@ static int power_level = 3;
static int tx_lpm;
static int max_rate = 4000000;
+struct sa1100_buf {
+ struct device *dev;
+ struct sk_buff *skb;
+ struct scatterlist sg;
+ struct dma_chan *chan;
+ dma_cookie_t cookie;
+};
+
struct sa1100_irda {
- unsigned char hscr0;
unsigned char utcr4;
unsigned char power;
unsigned char open;
@@ -53,12 +60,8 @@ struct sa1100_irda {
int speed;
int newspeed;
- struct sk_buff *txskb;
- struct sk_buff *rxskb;
- dma_addr_t txbuf_dma;
- dma_addr_t rxbuf_dma;
- dma_regs_t *txdma;
- dma_regs_t *rxdma;
+ struct sa1100_buf dma_rx;
+ struct sa1100_buf dma_tx;
struct device *dev;
struct irda_platform_data *pdata;
@@ -67,23 +70,103 @@ struct sa1100_irda {
iobuff_t tx_buff;
iobuff_t rx_buff;
+
+ int (*tx_start)(struct sk_buff *, struct net_device *, struct sa1100_irda *);
+ irqreturn_t (*irq)(struct net_device *, struct sa1100_irda *);
};
+static int sa1100_irda_set_speed(struct sa1100_irda *, int);
+
#define IS_FIR(si) ((si)->speed >= 4000000)
#define HPSIR_MAX_RXLEN 2047
+static struct dma_slave_config sa1100_irda_sir_tx = {
+ .direction = DMA_TO_DEVICE,
+ .dst_addr = __PREG(Ser2UTDR),
+ .dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE,
+ .dst_maxburst = 4,
+};
+
+static struct dma_slave_config sa1100_irda_fir_rx = {
+ .direction = DMA_FROM_DEVICE,
+ .src_addr = __PREG(Ser2HSDR),
+ .src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE,
+ .src_maxburst = 8,
+};
+
+static struct dma_slave_config sa1100_irda_fir_tx = {
+ .direction = DMA_TO_DEVICE,
+ .dst_addr = __PREG(Ser2HSDR),
+ .dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE,
+ .dst_maxburst = 8,
+};
+
+static unsigned sa1100_irda_dma_xferred(struct sa1100_buf *buf)
+{
+ struct dma_chan *chan = buf->chan;
+ struct dma_tx_state state;
+ enum dma_status status;
+
+ status = chan->device->device_tx_status(chan, buf->cookie, &state);
+ if (status != DMA_PAUSED)
+ return 0;
+
+ return sg_dma_len(&buf->sg) - state.residue;
+}
+
+static int sa1100_irda_dma_request(struct device *dev, struct sa1100_buf *buf,
+ const char *name, struct dma_slave_config *cfg)
+{
+ dma_cap_mask_t m;
+ int ret;
+
+ dma_cap_zero(m);
+ dma_cap_set(DMA_SLAVE, m);
+
+ buf->chan = dma_request_channel(m, sa11x0_dma_filter_fn, (void *)name);
+ if (!buf->chan) {
+ dev_err(dev, "unable to request DMA channel for %s\n",
+ name);
+ return -ENOENT;
+ }
+
+ ret = dmaengine_slave_config(buf->chan, cfg);
+ if (ret)
+ dev_warn(dev, "DMA slave_config for %s returned %d\n",
+ name, ret);
+
+ buf->dev = buf->chan->device->dev;
+
+ return 0;
+}
+
+static void sa1100_irda_dma_start(struct sa1100_buf *buf,
+ enum dma_transfer_direction dir, dma_async_tx_callback cb, void *cb_p)
+{
+ struct dma_async_tx_descriptor *desc;
+ struct dma_chan *chan = buf->chan;
+
+ desc = chan->device->device_prep_slave_sg(chan, &buf->sg, 1, dir,
+ DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+ if (desc) {
+ desc->callback = cb;
+ desc->callback_param = cb_p;
+ buf->cookie = dmaengine_submit(desc);
+ dma_async_issue_pending(chan);
+ }
+}
+
/*
* Allocate and map the receive buffer, unless it is already allocated.
*/
static int sa1100_irda_rx_alloc(struct sa1100_irda *si)
{
- if (si->rxskb)
+ if (si->dma_rx.skb)
return 0;
- si->rxskb = alloc_skb(HPSIR_MAX_RXLEN + 1, GFP_ATOMIC);
-
- if (!si->rxskb) {
+ si->dma_rx.skb = alloc_skb(HPSIR_MAX_RXLEN + 1, GFP_ATOMIC);
+ if (!si->dma_rx.skb) {
printk(KERN_ERR "sa1100_ir: out of memory for RX SKB\n");
return -ENOMEM;
}
@@ -92,11 +175,14 @@ static int sa1100_irda_rx_alloc(struct sa1100_irda *si)
* Align any IP headers that may be contained
* within the frame.
*/
- skb_reserve(si->rxskb, 1);
+ skb_reserve(si->dma_rx.skb, 1);
+
+ sg_set_buf(&si->dma_rx.sg, si->dma_rx.skb->data, HPSIR_MAX_RXLEN);
+ if (dma_map_sg(si->dma_rx.dev, &si->dma_rx.sg, 1, DMA_FROM_DEVICE) == 0) {
+ dev_kfree_skb_any(si->dma_rx.skb);
+ return -ENOMEM;
+ }
- si->rxbuf_dma = dma_map_single(si->dev, si->rxskb->data,
- HPSIR_MAX_RXLEN,
- DMA_FROM_DEVICE);
return 0;
}
@@ -106,7 +192,7 @@ static int sa1100_irda_rx_alloc(struct sa1100_irda *si)
*/
static void sa1100_irda_rx_dma_start(struct sa1100_irda *si)
{
- if (!si->rxskb) {
+ if (!si->dma_rx.skb) {
printk(KERN_ERR "sa1100_ir: rx buffer went missing\n");
return;
}
@@ -114,254 +200,87 @@ static void sa1100_irda_rx_dma_start(struct sa1100_irda *si)
/*
* First empty receive FIFO
*/
- Ser2HSCR0 = si->hscr0 | HSCR0_HSSP;
+ Ser2HSCR0 = HSCR0_HSSP;
/*
* Enable the DMA, receiver and receive interrupt.
*/
- sa1100_clear_dma(si->rxdma);
- sa1100_start_dma(si->rxdma, si->rxbuf_dma, HPSIR_MAX_RXLEN);
- Ser2HSCR0 = si->hscr0 | HSCR0_HSSP | HSCR0_RXE;
+ dmaengine_terminate_all(si->dma_rx.chan);
+ sa1100_irda_dma_start(&si->dma_rx, DMA_DEV_TO_MEM, NULL, NULL);
+
+ Ser2HSCR0 = HSCR0_HSSP | HSCR0_RXE;
}
-/*
- * Set the IrDA communications speed.
- */
-static int sa1100_irda_set_speed(struct sa1100_irda *si, int speed)
+static void sa1100_irda_check_speed(struct sa1100_irda *si)
{
- unsigned long flags;
- int brd, ret = -EINVAL;
-
- switch (speed) {
- case 9600: case 19200: case 38400:
- case 57600: case 115200:
- brd = 3686400 / (16 * speed) - 1;
-
- /*
- * Stop the receive DMA.
- */
- if (IS_FIR(si))
- sa1100_stop_dma(si->rxdma);
-
- local_irq_save(flags);
-
- Ser2UTCR3 = 0;
- Ser2HSCR0 = HSCR0_UART;
-
- Ser2UTCR1 = brd >> 8;
- Ser2UTCR2 = brd;
-
- /*
- * Clear status register
- */
- Ser2UTSR0 = UTSR0_REB | UTSR0_RBB | UTSR0_RID;
- Ser2UTCR3 = UTCR3_RIE | UTCR3_RXE | UTCR3_TXE;
-
- if (si->pdata->set_speed)
- si->pdata->set_speed(si->dev, speed);
-
- si->speed = speed;
-
- local_irq_restore(flags);
- ret = 0;
- break;
-
- case 4000000:
- local_irq_save(flags);
-
- si->hscr0 = 0;
-
- Ser2HSSR0 = 0xff;
- Ser2HSCR0 = si->hscr0 | HSCR0_HSSP;
- Ser2UTCR3 = 0;
-
- si->speed = speed;
-
- if (si->pdata->set_speed)
- si->pdata->set_speed(si->dev, speed);
-
- sa1100_irda_rx_alloc(si);
- sa1100_irda_rx_dma_start(si);
-
- local_irq_restore(flags);
-
- break;
-
- default:
- break;
+ if (si->newspeed) {
+ sa1100_irda_set_speed(si, si->newspeed);
+ si->newspeed = 0;
}
-
- return ret;
}
/*
- * Control the power state of the IrDA transmitter.
- * State:
- * 0 - off
- * 1 - short range, lowest power
- * 2 - medium range, medium power
- * 3 - maximum range, high power
- *
- * Currently, only assabet is known to support this.
+ * HP-SIR format support.
*/
-static int
-__sa1100_irda_set_power(struct sa1100_irda *si, unsigned int state)
+static void sa1100_irda_sirtxdma_irq(void *id)
{
- int ret = 0;
- if (si->pdata->set_power)
- ret = si->pdata->set_power(si->dev, state);
- return ret;
-}
-
-static inline int
-sa1100_set_power(struct sa1100_irda *si, unsigned int state)
-{
- int ret;
-
- ret = __sa1100_irda_set_power(si, state);
- if (ret == 0)
- si->power = state;
+ struct net_device *dev = id;
+ struct sa1100_irda *si = netdev_priv(dev);
- return ret;
-}
+ dma_unmap_sg(si->dma_tx.dev, &si->dma_tx.sg, 1, DMA_TO_DEVICE);
+ dev_kfree_skb(si->dma_tx.skb);
+ si->dma_tx.skb = NULL;
-static int sa1100_irda_startup(struct sa1100_irda *si)
-{
- int ret;
+ dev->stats.tx_packets++;
+ dev->stats.tx_bytes += sg_dma_len(&si->dma_tx.sg);
- /*
- * Ensure that the ports for this device are setup correctly.
- */
- if (si->pdata->startup) {
- ret = si->pdata->startup(si->dev);
- if (ret)
- return ret;
- }
-
- /*
- * Configure PPC for IRDA - we want to drive TXD2 low.
- * We also want to drive this pin low during sleep.
- */
- PPSR &= ~PPC_TXD2;
- PSDR &= ~PPC_TXD2;
- PPDR |= PPC_TXD2;
-
- /*
- * Enable HP-SIR modulation, and ensure that the port is disabled.
- */
- Ser2UTCR3 = 0;
- Ser2HSCR0 = HSCR0_UART;
- Ser2UTCR4 = si->utcr4;
- Ser2UTCR0 = UTCR0_8BitData;
- Ser2HSCR2 = HSCR2_TrDataH | HSCR2_RcDataL;
+ /* We need to ensure that the transmitter has finished. */
+ do
+ rmb();
+ while (Ser2UTSR1 & UTSR1_TBY);
/*
- * Clear status register
+ * Ok, we've finished transmitting. Now enable the receiver.
+ * Sometimes we get a receive IRQ immediately after a transmit...
*/
Ser2UTSR0 = UTSR0_REB | UTSR0_RBB | UTSR0_RID;
+ Ser2UTCR3 = UTCR3_RIE | UTCR3_RXE | UTCR3_TXE;
- ret = sa1100_irda_set_speed(si, si->speed = 9600);
- if (ret) {
- Ser2UTCR3 = 0;
- Ser2HSCR0 = 0;
-
- if (si->pdata->shutdown)
- si->pdata->shutdown(si->dev);
- }
-
- return ret;
-}
-
-static void sa1100_irda_shutdown(struct sa1100_irda *si)
-{
- /*
- * Stop all DMA activity.
- */
- sa1100_stop_dma(si->rxdma);
- sa1100_stop_dma(si->txdma);
-
- /* Disable the port. */
- Ser2UTCR3 = 0;
- Ser2HSCR0 = 0;
+ sa1100_irda_check_speed(si);
- if (si->pdata->shutdown)
- si->pdata->shutdown(si->dev);
+ /* I'm hungry! */
+ netif_wake_queue(dev);
}
-#ifdef CONFIG_PM
-/*
- * Suspend the IrDA interface.
- */
-static int sa1100_irda_suspend(struct platform_device *pdev, pm_message_t state)
+static int sa1100_irda_sir_tx_start(struct sk_buff *skb, struct net_device *dev,
+ struct sa1100_irda *si)
{
- struct net_device *dev = platform_get_drvdata(pdev);
- struct sa1100_irda *si;
-
- if (!dev)
- return 0;
-
- si = netdev_priv(dev);
- if (si->open) {
- /*
- * Stop the transmit queue
- */
- netif_device_detach(dev);
- disable_irq(dev->irq);
- sa1100_irda_shutdown(si);
- __sa1100_irda_set_power(si, 0);
+ si->tx_buff.data = si->tx_buff.head;
+ si->tx_buff.len = async_wrap_skb(skb, si->tx_buff.data,
+ si->tx_buff.truesize);
+
+ si->dma_tx.skb = skb;
+ sg_set_buf(&si->dma_tx.sg, si->tx_buff.data, si->tx_buff.len);
+ if (dma_map_sg(si->dma_tx.dev, &si->dma_tx.sg, 1, DMA_TO_DEVICE) == 0) {
+ si->dma_tx.skb = NULL;
+ netif_wake_queue(dev);
+ dev->stats.tx_dropped++;
+ return NETDEV_TX_OK;
}
- return 0;
-}
-
-/*
- * Resume the IrDA interface.
- */
-static int sa1100_irda_resume(struct platform_device *pdev)
-{
- struct net_device *dev = platform_get_drvdata(pdev);
- struct sa1100_irda *si;
-
- if (!dev)
- return 0;
+ sa1100_irda_dma_start(&si->dma_tx, DMA_MEM_TO_DEV, sa1100_irda_sirtxdma_irq, dev);
- si = netdev_priv(dev);
- if (si->open) {
- /*
- * If we missed a speed change, initialise at the new speed
- * directly. It is debatable whether this is actually
- * required, but in the interests of continuing from where
- * we left off it is desirable. The converse argument is
- * that we should re-negotiate at 9600 baud again.
- */
- if (si->newspeed) {
- si->speed = si->newspeed;
- si->newspeed = 0;
- }
-
- sa1100_irda_startup(si);
- __sa1100_irda_set_power(si, si->power);
- enable_irq(dev->irq);
-
- /*
- * This automatically wakes up the queue
- */
- netif_device_attach(dev);
- }
+ /*
+ * The mean turn-around time is enforced by XBOF padding,
+ * so we don't have to do anything special here.
+ */
+ Ser2UTCR3 = UTCR3_TXE;
- return 0;
+ return NETDEV_TX_OK;
}
-#else
-#define sa1100_irda_suspend NULL
-#define sa1100_irda_resume NULL
-#endif
-/*
- * HP-SIR format interrupt service routines.
- */
-static void sa1100_irda_hpsir_irq(struct net_device *dev)
+static irqreturn_t sa1100_irda_sir_irq(struct net_device *dev, struct sa1100_irda *si)
{
- struct sa1100_irda *si = netdev_priv(dev);
int status;
status = Ser2UTSR0;
@@ -414,51 +333,96 @@ static void sa1100_irda_hpsir_irq(struct net_device *dev)
}
- if (status & UTSR0_TFS && si->tx_buff.len) {
- /*
- * Transmitter FIFO is not full
- */
- do {
- Ser2UTDR = *si->tx_buff.data++;
- si->tx_buff.len -= 1;
- } while (Ser2UTSR1 & UTSR1_TNF && si->tx_buff.len);
+ return IRQ_HANDLED;
+}
- if (si->tx_buff.len == 0) {
- dev->stats.tx_packets++;
- dev->stats.tx_bytes += si->tx_buff.data -
- si->tx_buff.head;
+/*
+ * FIR format support.
+ */
+static void sa1100_irda_firtxdma_irq(void *id)
+{
+ struct net_device *dev = id;
+ struct sa1100_irda *si = netdev_priv(dev);
+ struct sk_buff *skb;
- /*
- * We need to ensure that the transmitter has
- * finished.
- */
- do
- rmb();
- while (Ser2UTSR1 & UTSR1_TBY);
+ /*
+ * Wait for the transmission to complete. Unfortunately,
+ * the hardware doesn't give us an interrupt to indicate
+ * "end of frame".
+ */
+ do
+ rmb();
+ while (!(Ser2HSSR0 & HSSR0_TUR) || Ser2HSSR1 & HSSR1_TBY);
- /*
- * Ok, we've finished transmitting. Now enable
- * the receiver. Sometimes we get a receive IRQ
- * immediately after a transmit...
- */
- Ser2UTSR0 = UTSR0_REB | UTSR0_RBB | UTSR0_RID;
- Ser2UTCR3 = UTCR3_RIE | UTCR3_RXE | UTCR3_TXE;
+ /*
+ * Clear the transmit underrun bit.
+ */
+ Ser2HSSR0 = HSSR0_TUR;
- if (si->newspeed) {
- sa1100_irda_set_speed(si, si->newspeed);
- si->newspeed = 0;
- }
+ /*
+ * Do we need to change speed? Note that we're lazy
+ * here - we don't free the old dma_rx.skb. We don't need
+ * to allocate a buffer either.
+ */
+ sa1100_irda_check_speed(si);
- /* I'm hungry! */
- netif_wake_queue(dev);
- }
+ /*
+ * Start reception. This disables the transmitter for
+ * us. This will be using the existing RX buffer.
+ */
+ sa1100_irda_rx_dma_start(si);
+
+ /* Account and free the packet. */
+ skb = si->dma_tx.skb;
+ if (skb) {
+ dma_unmap_sg(si->dma_tx.dev, &si->dma_tx.sg, 1,
+ DMA_TO_DEVICE);
+ dev->stats.tx_packets ++;
+ dev->stats.tx_bytes += skb->len;
+ dev_kfree_skb_irq(skb);
+ si->dma_tx.skb = NULL;
}
+
+ /*
+ * Make sure that the TX queue is available for sending
+ * (for retries). TX has priority over RX at all times.
+ */
+ netif_wake_queue(dev);
+}
+
+static int sa1100_irda_fir_tx_start(struct sk_buff *skb, struct net_device *dev,
+ struct sa1100_irda *si)
+{
+ int mtt = irda_get_mtt(skb);
+
+ si->dma_tx.skb = skb;
+ sg_set_buf(&si->dma_tx.sg, skb->data, skb->len);
+ if (dma_map_sg(si->dma_tx.dev, &si->dma_tx.sg, 1, DMA_TO_DEVICE) == 0) {
+ si->dma_tx.skb = NULL;
+ netif_wake_queue(dev);
+ dev->stats.tx_dropped++;
+ dev_kfree_skb(skb);
+ return NETDEV_TX_OK;
+ }
+
+ sa1100_irda_dma_start(&si->dma_tx, DMA_MEM_TO_DEV, sa1100_irda_firtxdma_irq, dev);
+
+ /*
+ * If we have a mean turn-around time, impose the specified
+ * specified delay. We could shorten this by timing from
+ * the point we received the packet.
+ */
+ if (mtt)
+ udelay(mtt);
+
+ Ser2HSCR0 = HSCR0_HSSP | HSCR0_TXE;
+
+ return NETDEV_TX_OK;
}
static void sa1100_irda_fir_error(struct sa1100_irda *si, struct net_device *dev)
{
- struct sk_buff *skb = si->rxskb;
- dma_addr_t dma_addr;
+ struct sk_buff *skb = si->dma_rx.skb;
unsigned int len, stat, data;
if (!skb) {
@@ -469,11 +433,10 @@ static void sa1100_irda_fir_error(struct sa1100_irda *si, struct net_device *dev
/*
* Get the current data position.
*/
- dma_addr = sa1100_get_dma_pos(si->rxdma);
- len = dma_addr - si->rxbuf_dma;
+ len = sa1100_irda_dma_xferred(&si->dma_rx);
if (len > HPSIR_MAX_RXLEN)
len = HPSIR_MAX_RXLEN;
- dma_unmap_single(si->dev, si->rxbuf_dma, len, DMA_FROM_DEVICE);
+ dma_unmap_sg(si->dma_rx.dev, &si->dma_rx.sg, 1, DMA_FROM_DEVICE);
do {
/*
@@ -501,7 +464,7 @@ static void sa1100_irda_fir_error(struct sa1100_irda *si, struct net_device *dev
} while (Ser2HSSR0 & HSSR0_EIF);
if (stat & HSSR1_EOF) {
- si->rxskb = NULL;
+ si->dma_rx.skb = NULL;
skb_put(skb, len);
skb->dev = dev;
@@ -518,28 +481,23 @@ static void sa1100_irda_fir_error(struct sa1100_irda *si, struct net_device *dev
netif_rx(skb);
} else {
/*
- * Remap the buffer.
+ * Remap the buffer - it was previously mapped, and we
+ * hope that this succeeds.
*/
- si->rxbuf_dma = dma_map_single(si->dev, si->rxskb->data,
- HPSIR_MAX_RXLEN,
- DMA_FROM_DEVICE);
+ dma_map_sg(si->dma_rx.dev, &si->dma_rx.sg, 1, DMA_FROM_DEVICE);
}
}
/*
- * FIR format interrupt service routine. We only have to
- * handle RX events; transmit events go via the TX DMA handler.
- *
- * No matter what, we disable RX, process, and the restart RX.
+ * We only have to handle RX events here; transmit events go via the TX
+ * DMA handler. We disable RX, process, and the restart RX.
*/
-static void sa1100_irda_fir_irq(struct net_device *dev)
+static irqreturn_t sa1100_irda_fir_irq(struct net_device *dev, struct sa1100_irda *si)
{
- struct sa1100_irda *si = netdev_priv(dev);
-
/*
* Stop RX DMA
*/
- sa1100_stop_dma(si->rxdma);
+ dmaengine_pause(si->dma_rx.chan);
/*
* Framing error - we throw away the packet completely.
@@ -555,7 +513,7 @@ static void sa1100_irda_fir_irq(struct net_device *dev)
/*
* Clear out the DMA...
*/
- Ser2HSCR0 = si->hscr0 | HSCR0_HSSP;
+ Ser2HSCR0 = HSCR0_HSSP;
/*
* Clear selected status bits now, so we
@@ -577,74 +535,124 @@ static void sa1100_irda_fir_irq(struct net_device *dev)
* No matter what happens, we must restart reception.
*/
sa1100_irda_rx_dma_start(si);
-}
-static irqreturn_t sa1100_irda_irq(int irq, void *dev_id)
-{
- struct net_device *dev = dev_id;
- if (IS_FIR(((struct sa1100_irda *)netdev_priv(dev))))
- sa1100_irda_fir_irq(dev);
- else
- sa1100_irda_hpsir_irq(dev);
return IRQ_HANDLED;
}
/*
- * TX DMA completion handler.
+ * Set the IrDA communications speed.
*/
-static void sa1100_irda_txdma_irq(void *id)
+static int sa1100_irda_set_speed(struct sa1100_irda *si, int speed)
{
- struct net_device *dev = id;
- struct sa1100_irda *si = netdev_priv(dev);
- struct sk_buff *skb = si->txskb;
+ unsigned long flags;
+ int brd, ret = -EINVAL;
- si->txskb = NULL;
+ switch (speed) {
+ case 9600: case 19200: case 38400:
+ case 57600: case 115200:
+ brd = 3686400 / (16 * speed) - 1;
- /*
- * Wait for the transmission to complete. Unfortunately,
- * the hardware doesn't give us an interrupt to indicate
- * "end of frame".
- */
- do
- rmb();
- while (!(Ser2HSSR0 & HSSR0_TUR) || Ser2HSSR1 & HSSR1_TBY);
+ /* Stop the receive DMA, and configure transmit. */
+ if (IS_FIR(si)) {
+ dmaengine_terminate_all(si->dma_rx.chan);
+ dmaengine_slave_config(si->dma_tx.chan,
+ &sa1100_irda_sir_tx);
+ }
- /*
- * Clear the transmit underrun bit.
- */
- Ser2HSSR0 = HSSR0_TUR;
+ local_irq_save(flags);
- /*
- * Do we need to change speed? Note that we're lazy
- * here - we don't free the old rxskb. We don't need
- * to allocate a buffer either.
- */
- if (si->newspeed) {
- sa1100_irda_set_speed(si, si->newspeed);
- si->newspeed = 0;
- }
+ Ser2UTCR3 = 0;
+ Ser2HSCR0 = HSCR0_UART;
- /*
- * Start reception. This disables the transmitter for
- * us. This will be using the existing RX buffer.
- */
- sa1100_irda_rx_dma_start(si);
+ Ser2UTCR1 = brd >> 8;
+ Ser2UTCR2 = brd;
- /*
- * Account and free the packet.
- */
- if (skb) {
- dma_unmap_single(si->dev, si->txbuf_dma, skb->len, DMA_TO_DEVICE);
- dev->stats.tx_packets ++;
- dev->stats.tx_bytes += skb->len;
- dev_kfree_skb_irq(skb);
+ /*
+ * Clear status register
+ */
+ Ser2UTSR0 = UTSR0_REB | UTSR0_RBB | UTSR0_RID;
+ Ser2UTCR3 = UTCR3_RIE | UTCR3_RXE | UTCR3_TXE;
+
+ if (si->pdata->set_speed)
+ si->pdata->set_speed(si->dev, speed);
+
+ si->speed = speed;
+ si->tx_start = sa1100_irda_sir_tx_start;
+ si->irq = sa1100_irda_sir_irq;
+
+ local_irq_restore(flags);
+ ret = 0;
+ break;
+
+ case 4000000:
+ if (!IS_FIR(si))
+ dmaengine_slave_config(si->dma_tx.chan,
+ &sa1100_irda_fir_tx);
+
+ local_irq_save(flags);
+
+ Ser2HSSR0 = 0xff;
+ Ser2HSCR0 = HSCR0_HSSP;
+ Ser2UTCR3 = 0;
+
+ si->speed = speed;
+ si->tx_start = sa1100_irda_fir_tx_start;
+ si->irq = sa1100_irda_fir_irq;
+
+ if (si->pdata->set_speed)
+ si->pdata->set_speed(si->dev, speed);
+
+ sa1100_irda_rx_alloc(si);
+ sa1100_irda_rx_dma_start(si);
+
+ local_irq_restore(flags);
+
+ break;
+
+ default:
+ break;
}
- /*
- * Make sure that the TX queue is available for sending
- * (for retries). TX has priority over RX at all times.
- */
- netif_wake_queue(dev);
+ return ret;
+}
+
+/*
+ * Control the power state of the IrDA transmitter.
+ * State:
+ * 0 - off
+ * 1 - short range, lowest power
+ * 2 - medium range, medium power
+ * 3 - maximum range, high power
+ *
+ * Currently, only assabet is known to support this.
+ */
+static int
+__sa1100_irda_set_power(struct sa1100_irda *si, unsigned int state)
+{
+ int ret = 0;
+ if (si->pdata->set_power)
+ ret = si->pdata->set_power(si->dev, state);
+ return ret;
+}
+
+static inline int
+sa1100_set_power(struct sa1100_irda *si, unsigned int state)
+{
+ int ret;
+
+ ret = __sa1100_irda_set_power(si, state);
+ if (ret == 0)
+ si->power = state;
+
+ return ret;
+}
+
+static irqreturn_t sa1100_irda_irq(int irq, void *dev_id)
+{
+ struct net_device *dev = dev_id;
+ struct sa1100_irda *si = netdev_priv(dev);
+
+ return si->irq(dev, si);
}
static int sa1100_irda_hard_xmit(struct sk_buff *skb, struct net_device *dev)
@@ -660,62 +668,19 @@ static int sa1100_irda_hard_xmit(struct sk_buff *skb, struct net_device *dev)
if (speed != si->speed && speed != -1)
si->newspeed = speed;
- /*
- * If this is an empty frame, we can bypass a lot.
- */
+ /* If this is an empty frame, we can bypass a lot. */
if (skb->len == 0) {
- if (si->newspeed) {
- si->newspeed = 0;
- sa1100_irda_set_speed(si, speed);
- }
+ sa1100_irda_check_speed(si);
dev_kfree_skb(skb);
return NETDEV_TX_OK;
}
- if (!IS_FIR(si)) {
- netif_stop_queue(dev);
-
- si->tx_buff.data = si->tx_buff.head;
- si->tx_buff.len = async_wrap_skb(skb, si->tx_buff.data,
- si->tx_buff.truesize);
-
- /*
- * Set the transmit interrupt enable. This will fire
- * off an interrupt immediately. Note that we disable
- * the receiver so we won't get spurious characteres
- * received.
- */
- Ser2UTCR3 = UTCR3_TIE | UTCR3_TXE;
-
- dev_kfree_skb(skb);
- } else {
- int mtt = irda_get_mtt(skb);
-
- /*
- * We must not be transmitting...
- */
- BUG_ON(si->txskb);
-
- netif_stop_queue(dev);
-
- si->txskb = skb;
- si->txbuf_dma = dma_map_single(si->dev, skb->data,
- skb->len, DMA_TO_DEVICE);
-
- sa1100_start_dma(si->txdma, si->txbuf_dma, skb->len);
-
- /*
- * If we have a mean turn-around time, impose the specified
- * specified delay. We could shorten this by timing from
- * the point we received the packet.
- */
- if (mtt)
- udelay(mtt);
+ netif_stop_queue(dev);
- Ser2HSCR0 = si->hscr0 | HSCR0_HSSP | HSCR0_TXE;
- }
+ /* We must not already have a skb to transmit... */
+ BUG_ON(si->dma_tx.skb);
- return NETDEV_TX_OK;
+ return si->tx_start(skb, dev, si);
}
static int
@@ -762,6 +727,69 @@ sa1100_irda_ioctl(struct net_device *dev, struct ifreq *ifreq, int cmd)
return ret;
}
+static int sa1100_irda_startup(struct sa1100_irda *si)
+{
+ int ret;
+
+ /*
+ * Ensure that the ports for this device are setup correctly.
+ */
+ if (si->pdata->startup) {
+ ret = si->pdata->startup(si->dev);
+ if (ret)
+ return ret;
+ }
+
+ /*
+ * Configure PPC for IRDA - we want to drive TXD2 low.
+ * We also want to drive this pin low during sleep.
+ */
+ PPSR &= ~PPC_TXD2;
+ PSDR &= ~PPC_TXD2;
+ PPDR |= PPC_TXD2;
+
+ /*
+ * Enable HP-SIR modulation, and ensure that the port is disabled.
+ */
+ Ser2UTCR3 = 0;
+ Ser2HSCR0 = HSCR0_UART;
+ Ser2UTCR4 = si->utcr4;
+ Ser2UTCR0 = UTCR0_8BitData;
+ Ser2HSCR2 = HSCR2_TrDataH | HSCR2_RcDataL;
+
+ /*
+ * Clear status register
+ */
+ Ser2UTSR0 = UTSR0_REB | UTSR0_RBB | UTSR0_RID;
+
+ ret = sa1100_irda_set_speed(si, si->speed = 9600);
+ if (ret) {
+ Ser2UTCR3 = 0;
+ Ser2HSCR0 = 0;
+
+ if (si->pdata->shutdown)
+ si->pdata->shutdown(si->dev);
+ }
+
+ return ret;
+}
+
+static void sa1100_irda_shutdown(struct sa1100_irda *si)
+{
+ /*
+ * Stop all DMA activity.
+ */
+ dmaengine_terminate_all(si->dma_rx.chan);
+ dmaengine_terminate_all(si->dma_tx.chan);
+
+ /* Disable the port. */
+ Ser2UTCR3 = 0;
+ Ser2HSCR0 = 0;
+
+ if (si->pdata->shutdown)
+ si->pdata->shutdown(si->dev);
+}
+
static int sa1100_irda_start(struct net_device *dev)
{
struct sa1100_irda *si = netdev_priv(dev);
@@ -769,26 +797,17 @@ static int sa1100_irda_start(struct net_device *dev)
si->speed = 9600;
- err = request_irq(dev->irq, sa1100_irda_irq, 0, dev->name, dev);
- if (err)
- goto err_irq;
-
- err = sa1100_request_dma(DMA_Ser2HSSPRd, "IrDA receive",
- NULL, NULL, &si->rxdma);
+ err = sa1100_irda_dma_request(si->dev, &si->dma_rx, "Ser2ICPRc",
+ &sa1100_irda_fir_rx);
if (err)
goto err_rx_dma;
- err = sa1100_request_dma(DMA_Ser2HSSPWr, "IrDA transmit",
- sa1100_irda_txdma_irq, dev, &si->txdma);
+ err = sa1100_irda_dma_request(si->dev, &si->dma_tx, "Ser2ICPTr",
+ &sa1100_irda_sir_tx);
if (err)
goto err_tx_dma;
/*
- * The interrupt must remain disabled for now.
- */
- disable_irq(dev->irq);
-
- /*
* Setup the serial port for the specified speed.
*/
err = sa1100_irda_startup(si);
@@ -803,44 +822,60 @@ static int sa1100_irda_start(struct net_device *dev)
if (!si->irlap)
goto err_irlap;
+ err = request_irq(dev->irq, sa1100_irda_irq, 0, dev->name, dev);
+ if (err)
+ goto err_irq;
+
/*
* Now enable the interrupt and start the queue
*/
si->open = 1;
sa1100_set_power(si, power_level); /* low power mode */
- enable_irq(dev->irq);
+
netif_start_queue(dev);
return 0;
+err_irq:
+ irlap_close(si->irlap);
err_irlap:
si->open = 0;
sa1100_irda_shutdown(si);
err_startup:
- sa1100_free_dma(si->txdma);
+ dma_release_channel(si->dma_tx.chan);
err_tx_dma:
- sa1100_free_dma(si->rxdma);
+ dma_release_channel(si->dma_rx.chan);
err_rx_dma:
- free_irq(dev->irq, dev);
-err_irq:
return err;
}
static int sa1100_irda_stop(struct net_device *dev)
{
struct sa1100_irda *si = netdev_priv(dev);
+ struct sk_buff *skb;
+
+ netif_stop_queue(dev);
- disable_irq(dev->irq);
+ si->open = 0;
sa1100_irda_shutdown(si);
/*
- * If we have been doing DMA receive, make sure we
+ * If we have been doing any DMA activity, make sure we
* tidy that up cleanly.
*/
- if (si->rxskb) {
- dma_unmap_single(si->dev, si->rxbuf_dma, HPSIR_MAX_RXLEN,
- DMA_FROM_DEVICE);
- dev_kfree_skb(si->rxskb);
- si->rxskb = NULL;
+ skb = si->dma_rx.skb;
+ if (skb) {
+ dma_unmap_sg(si->dma_rx.dev, &si->dma_rx.sg, 1,
+ DMA_FROM_DEVICE);
+ dev_kfree_skb(skb);
+ si->dma_rx.skb = NULL;
+ }
+
+ skb = si->dma_tx.skb;
+ if (skb) {
+ dma_unmap_sg(si->dma_tx.dev, &si->dma_tx.sg, 1,
+ DMA_TO_DEVICE);
+ dev_kfree_skb(skb);
+ si->dma_tx.skb = NULL;
}
/* Stop IrLAP */
@@ -849,14 +884,11 @@ static int sa1100_irda_stop(struct net_device *dev)
si->irlap = NULL;
}
- netif_stop_queue(dev);
- si->open = 0;
-
/*
* Free resources
*/
- sa1100_free_dma(si->txdma);
- sa1100_free_dma(si->rxdma);
+ dma_release_channel(si->dma_tx.chan);
+ dma_release_channel(si->dma_rx.chan);
free_irq(dev->irq, dev);
sa1100_set_power(si, 0);
@@ -888,11 +920,15 @@ static int sa1100_irda_probe(struct platform_device *pdev)
struct net_device *dev;
struct sa1100_irda *si;
unsigned int baudrate_mask;
- int err;
+ int err, irq;
if (!pdev->dev.platform_data)
return -EINVAL;
+ irq = platform_get_irq(pdev, 0);
+ if (irq <= 0)
+ return irq < 0 ? irq : -ENXIO;
+
err = request_mem_region(__PREG(Ser2UTCR0), 0x24, "IrDA") ? 0 : -EBUSY;
if (err)
goto err_mem_1;
@@ -907,22 +943,27 @@ static int sa1100_irda_probe(struct platform_device *pdev)
if (!dev)
goto err_mem_4;
+ SET_NETDEV_DEV(dev, &pdev->dev);
+
si = netdev_priv(dev);
si->dev = &pdev->dev;
si->pdata = pdev->dev.platform_data;
+ sg_init_table(&si->dma_rx.sg, 1);
+ sg_init_table(&si->dma_tx.sg, 1);
+
/*
* Initialise the HP-SIR buffers
*/
err = sa1100_irda_init_iobuf(&si->rx_buff, 14384);
if (err)
goto err_mem_5;
- err = sa1100_irda_init_iobuf(&si->tx_buff, 4000);
+ err = sa1100_irda_init_iobuf(&si->tx_buff, IRDA_SIR_MAX_FRAME);
if (err)
goto err_mem_5;
dev->netdev_ops = &sa1100_irda_netdev_ops;
- dev->irq = IRQ_Ser2ICP;
+ dev->irq = irq;
irda_init_max_qos_capabilies(&si->qos);
@@ -996,6 +1037,74 @@ static int sa1100_irda_remove(struct platform_device *pdev)
return 0;
}
+#ifdef CONFIG_PM
+/*
+ * Suspend the IrDA interface.
+ */
+static int sa1100_irda_suspend(struct platform_device *pdev, pm_message_t state)
+{
+ struct net_device *dev = platform_get_drvdata(pdev);
+ struct sa1100_irda *si;
+
+ if (!dev)
+ return 0;
+
+ si = netdev_priv(dev);
+ if (si->open) {
+ /*
+ * Stop the transmit queue
+ */
+ netif_device_detach(dev);
+ disable_irq(dev->irq);
+ sa1100_irda_shutdown(si);
+ __sa1100_irda_set_power(si, 0);
+ }
+
+ return 0;
+}
+
+/*
+ * Resume the IrDA interface.
+ */
+static int sa1100_irda_resume(struct platform_device *pdev)
+{
+ struct net_device *dev = platform_get_drvdata(pdev);
+ struct sa1100_irda *si;
+
+ if (!dev)
+ return 0;
+
+ si = netdev_priv(dev);
+ if (si->open) {
+ /*
+ * If we missed a speed change, initialise at the new speed
+ * directly. It is debatable whether this is actually
+ * required, but in the interests of continuing from where
+ * we left off it is desirable. The converse argument is
+ * that we should re-negotiate at 9600 baud again.
+ */
+ if (si->newspeed) {
+ si->speed = si->newspeed;
+ si->newspeed = 0;
+ }
+
+ sa1100_irda_startup(si);
+ __sa1100_irda_set_power(si, si->power);
+ enable_irq(dev->irq);
+
+ /*
+ * This automatically wakes up the queue
+ */
+ netif_device_attach(dev);
+ }
+
+ return 0;
+}
+#else
+#define sa1100_irda_suspend NULL
+#define sa1100_irda_resume NULL
+#endif
+
static struct platform_driver sa1100ir_driver = {
.probe = sa1100_irda_probe,
.remove = sa1100_irda_remove,
diff --git a/drivers/pcmcia/sa1111_generic.c b/drivers/pcmcia/sa1111_generic.c
index ef5848f6524..70f728ce185 100644
--- a/drivers/pcmcia/sa1111_generic.c
+++ b/drivers/pcmcia/sa1111_generic.c
@@ -22,6 +22,40 @@
#include "sa1111_generic.h"
+/*
+ * These are offsets from the above base.
+ */
+#define PCCR 0x0000
+#define PCSSR 0x0004
+#define PCSR 0x0008
+
+#define PCSR_S0_READY (1<<0)
+#define PCSR_S1_READY (1<<1)
+#define PCSR_S0_DETECT (1<<2)
+#define PCSR_S1_DETECT (1<<3)
+#define PCSR_S0_VS1 (1<<4)
+#define PCSR_S0_VS2 (1<<5)
+#define PCSR_S1_VS1 (1<<6)
+#define PCSR_S1_VS2 (1<<7)
+#define PCSR_S0_WP (1<<8)
+#define PCSR_S1_WP (1<<9)
+#define PCSR_S0_BVD1 (1<<10)
+#define PCSR_S0_BVD2 (1<<11)
+#define PCSR_S1_BVD1 (1<<12)
+#define PCSR_S1_BVD2 (1<<13)
+
+#define PCCR_S0_RST (1<<0)
+#define PCCR_S1_RST (1<<1)
+#define PCCR_S0_FLT (1<<2)
+#define PCCR_S1_FLT (1<<3)
+#define PCCR_S0_PWAITEN (1<<4)
+#define PCCR_S1_PWAITEN (1<<5)
+#define PCCR_S0_PSE (1<<6)
+#define PCCR_S1_PSE (1<<7)
+
+#define PCSSR_S0_SLEEP (1<<0)
+#define PCSSR_S1_SLEEP (1<<1)
+
#define IDX_IRQ_S0_READY_NINT (0)
#define IDX_IRQ_S0_CD_VALID (1)
#define IDX_IRQ_S0_BVD1_STSCHG (2)
@@ -32,7 +66,7 @@
void sa1111_pcmcia_socket_state(struct soc_pcmcia_socket *skt, struct pcmcia_state *state)
{
struct sa1111_pcmcia_socket *s = to_skt(skt);
- unsigned long status = sa1111_readl(s->dev->mapbase + SA1111_PCSR);
+ unsigned long status = sa1111_readl(s->dev->mapbase + PCSR);
switch (skt->nr) {
case 0:
@@ -88,10 +122,10 @@ int sa1111_pcmcia_configure_socket(struct soc_pcmcia_socket *skt, const socket_s
pccr_set_mask |= PCCR_S0_FLT|PCCR_S1_FLT;
local_irq_save(flags);
- val = sa1111_readl(s->dev->mapbase + SA1111_PCCR);
+ val = sa1111_readl(s->dev->mapbase + PCCR);
val &= ~pccr_skt_mask;
val |= pccr_set_mask & pccr_skt_mask;
- sa1111_writel(val, s->dev->mapbase + SA1111_PCCR);
+ sa1111_writel(val, s->dev->mapbase + PCCR);
local_irq_restore(flags);
return 0;
@@ -141,20 +175,26 @@ int sa1111_pcmcia_add(struct sa1111_dev *dev, struct pcmcia_low_level *ops,
static int pcmcia_probe(struct sa1111_dev *dev)
{
void __iomem *base;
+ int ret;
+
+ ret = sa1111_enable_device(dev);
+ if (ret)
+ return ret;
dev_set_drvdata(&dev->dev, NULL);
- if (!request_mem_region(dev->res.start, 512,
- SA1111_DRIVER_NAME(dev)))
+ if (!request_mem_region(dev->res.start, 512, SA1111_DRIVER_NAME(dev))) {
+ sa1111_disable_device(dev);
return -EBUSY;
+ }
base = dev->mapbase;
/*
* Initialise the suspend state.
*/
- sa1111_writel(PCSSR_S0_SLEEP | PCSSR_S1_SLEEP, base + SA1111_PCSSR);
- sa1111_writel(PCCR_S0_FLT | PCCR_S1_FLT, base + SA1111_PCCR);
+ sa1111_writel(PCSSR_S0_SLEEP | PCSSR_S1_SLEEP, base + PCSSR);
+ sa1111_writel(PCCR_S0_FLT | PCCR_S1_FLT, base + PCCR);
#ifdef CONFIG_SA1100_BADGE4
pcmcia_badge4_init(&dev->dev);
@@ -184,6 +224,7 @@ static int __devexit pcmcia_remove(struct sa1111_dev *dev)
}
release_mem_region(dev->res.start, 512);
+ sa1111_disable_device(dev);
return 0;
}
diff --git a/drivers/pcmcia/sa1111_neponset.c b/drivers/pcmcia/sa1111_neponset.c
index 50f297d850e..1d78739c4c0 100644
--- a/drivers/pcmcia/sa1111_neponset.c
+++ b/drivers/pcmcia/sa1111_neponset.c
@@ -94,12 +94,7 @@ neponset_pcmcia_configure_socket(struct soc_pcmcia_socket *skt, const socket_sta
ret = sa1111_pcmcia_configure_socket(skt, state);
if (ret == 0) {
- unsigned long flags;
-
- local_irq_save(flags);
- NCR_0 = (NCR_0 & ~ncr_mask) | ncr_set;
-
- local_irq_restore(flags);
+ neponset_ncr_frob(ncr_mask, ncr_set);
sa1111_set_io(s->dev, pa_dwr_mask, pa_dwr_set);
}
diff --git a/drivers/rtc/rtc-sa1100.c b/drivers/rtc/rtc-sa1100.c
index fa512ed4201..4940fa8c4e1 100644
--- a/drivers/rtc/rtc-sa1100.c
+++ b/drivers/rtc/rtc-sa1100.c
@@ -35,7 +35,7 @@
#include <linux/bitops.h>
#include <mach/hardware.h>
-#include <asm/irq.h>
+#include <mach/irqs.h>
#if defined(CONFIG_ARCH_PXA) || defined(CONFIG_ARCH_MMP)
#include <mach/regs-rtc.h>
diff --git a/drivers/scsi/arm/arxescsi.c b/drivers/scsi/arm/arxescsi.c
index a750aa72b8e..2a28b4ad197 100644
--- a/drivers/scsi/arm/arxescsi.c
+++ b/drivers/scsi/arm/arxescsi.c
@@ -305,7 +305,7 @@ arxescsi_probe(struct expansion_card *ec, const struct ecard_id *id)
info->base = base;
info->info.scsi.io_base = base + 0x2000;
- info->info.scsi.irq = NO_IRQ;
+ info->info.scsi.irq = 0;
info->info.scsi.dma = NO_DMA;
info->info.scsi.io_shift = 5;
info->info.ifcfg.clockrate = 24; /* MHz */
diff --git a/drivers/scsi/arm/fas216.c b/drivers/scsi/arm/fas216.c
index e85c40b6e19..6206a666a8e 100644
--- a/drivers/scsi/arm/fas216.c
+++ b/drivers/scsi/arm/fas216.c
@@ -2176,7 +2176,7 @@ static void fas216_done(FAS216_Info *info, unsigned int result)
fn = (void (*)(FAS216_Info *, struct scsi_cmnd *, unsigned int))SCpnt->host_scribble;
fn(info, SCpnt, result);
- if (info->scsi.irq != NO_IRQ) {
+ if (info->scsi.irq) {
spin_lock_irqsave(&info->host_lock, flags);
if (info->scsi.phase == PHASE_IDLE)
fas216_kick(info);
@@ -2276,7 +2276,7 @@ static int fas216_noqueue_command_lck(struct scsi_cmnd *SCpnt,
* We should only be using this if we don't have an interrupt.
* Provide some "incentive" to use the queueing code.
*/
- BUG_ON(info->scsi.irq != NO_IRQ);
+ BUG_ON(info->scsi.irq);
info->internal_done = 0;
fas216_queue_command_lck(SCpnt, fas216_internal_done);
diff --git a/drivers/scsi/arm/fas216.h b/drivers/scsi/arm/fas216.h
index 84b7127c012..df2e1b3ddfe 100644
--- a/drivers/scsi/arm/fas216.h
+++ b/drivers/scsi/arm/fas216.h
@@ -12,10 +12,6 @@
#ifndef FAS216_H
#define FAS216_H
-#ifndef NO_IRQ
-#define NO_IRQ 255
-#endif
-
#include <scsi/scsi_eh.h>
#include "queue.h"
diff --git a/drivers/tty/serial/sa1100.c b/drivers/tty/serial/sa1100.c
index ef7a21a6a01..2ca5959ec3f 100644
--- a/drivers/tty/serial/sa1100.c
+++ b/drivers/tty/serial/sa1100.c
@@ -38,6 +38,7 @@
#include <asm/irq.h>
#include <mach/hardware.h>
+#include <mach/irqs.h>
#include <asm/mach/serial_sa1100.h>
/* We've been assigned a range on the "Low-density serial ports" major */
diff --git a/drivers/usb/host/ohci-sa1111.c b/drivers/usb/host/ohci-sa1111.c
index 4bde4f9821b..e1004fb37bd 100644
--- a/drivers/usb/host/ohci-sa1111.c
+++ b/drivers/usb/host/ohci-sa1111.c
@@ -16,29 +16,115 @@
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <mach/assabet.h>
-#include <mach/badge4.h>
#include <asm/hardware/sa1111.h>
#ifndef CONFIG_SA1111
#error "This file is SA-1111 bus glue. CONFIG_SA1111 must be defined."
#endif
-extern int usb_disabled(void);
+#define USB_STATUS 0x0118
+#define USB_RESET 0x011c
+#define USB_IRQTEST 0x0120
+
+#define USB_RESET_FORCEIFRESET (1 << 0)
+#define USB_RESET_FORCEHCRESET (1 << 1)
+#define USB_RESET_CLKGENRESET (1 << 2)
+#define USB_RESET_SIMSCALEDOWN (1 << 3)
+#define USB_RESET_USBINTTEST (1 << 4)
+#define USB_RESET_SLEEPSTBYEN (1 << 5)
+#define USB_RESET_PWRSENSELOW (1 << 6)
+#define USB_RESET_PWRCTRLLOW (1 << 7)
+
+#define USB_STATUS_IRQHCIRMTWKUP (1 << 7)
+#define USB_STATUS_IRQHCIBUFFACC (1 << 8)
+#define USB_STATUS_NIRQHCIM (1 << 9)
+#define USB_STATUS_NHCIMFCLR (1 << 10)
+#define USB_STATUS_USBPWRSENSE (1 << 11)
-/*-------------------------------------------------------------------------*/
+#if 0
+static void dump_hci_status(struct usb_hcd *hcd, const char *label)
+{
+ unsigned long status = sa1111_readl(hcd->regs + USB_STATUS);
+
+ dbg("%s USB_STATUS = { %s%s%s%s%s}", label,
+ ((status & USB_STATUS_IRQHCIRMTWKUP) ? "IRQHCIRMTWKUP " : ""),
+ ((status & USB_STATUS_IRQHCIBUFFACC) ? "IRQHCIBUFFACC " : ""),
+ ((status & USB_STATUS_NIRQHCIM) ? "" : "IRQHCIM "),
+ ((status & USB_STATUS_NHCIMFCLR) ? "" : "HCIMFCLR "),
+ ((status & USB_STATUS_USBPWRSENSE) ? "USBPWRSENSE " : ""));
+}
+#endif
-static void sa1111_start_hc(struct sa1111_dev *dev)
+static int ohci_sa1111_reset(struct usb_hcd *hcd)
{
- unsigned int usb_rst = 0;
+ struct ohci_hcd *ohci = hcd_to_ohci(hcd);
+
+ ohci_hcd_init(ohci);
+ return ohci_init(ohci);
+}
- printk(KERN_DEBUG "%s: starting SA-1111 OHCI USB Controller\n",
- __FILE__);
+static int __devinit ohci_sa1111_start(struct usb_hcd *hcd)
+{
+ struct ohci_hcd *ohci = hcd_to_ohci(hcd);
+ int ret;
-#ifdef CONFIG_SA1100_BADGE4
- if (machine_is_badge4()) {
- badge4_set_5V(BADGE4_5V_USB, 1);
+ ret = ohci_run(ohci);
+ if (ret < 0) {
+ ohci_err(ohci, "can't start\n");
+ ohci_stop(hcd);
}
+ return ret;
+}
+
+static const struct hc_driver ohci_sa1111_hc_driver = {
+ .description = hcd_name,
+ .product_desc = "SA-1111 OHCI",
+ .hcd_priv_size = sizeof(struct ohci_hcd),
+
+ /*
+ * generic hardware linkage
+ */
+ .irq = ohci_irq,
+ .flags = HCD_USB11 | HCD_MEMORY,
+
+ /*
+ * basic lifecycle operations
+ */
+ .reset = ohci_sa1111_reset,
+ .start = ohci_sa1111_start,
+ .stop = ohci_stop,
+ .shutdown = ohci_shutdown,
+
+ /*
+ * managing i/o requests and associated device resources
+ */
+ .urb_enqueue = ohci_urb_enqueue,
+ .urb_dequeue = ohci_urb_dequeue,
+ .endpoint_disable = ohci_endpoint_disable,
+
+ /*
+ * scheduling support
+ */
+ .get_frame_number = ohci_get_frame,
+
+ /*
+ * root hub support
+ */
+ .hub_status_data = ohci_hub_status_data,
+ .hub_control = ohci_hub_control,
+#ifdef CONFIG_PM
+ .bus_suspend = ohci_bus_suspend,
+ .bus_resume = ohci_bus_resume,
#endif
+ .start_port_reset = ohci_start_port_reset,
+};
+
+static int sa1111_start_hc(struct sa1111_dev *dev)
+{
+ unsigned int usb_rst = 0;
+ int ret;
+
+ dev_dbg(&dev->dev, "starting SA-1111 OHCI USB Controller\n");
if (machine_is_xp860() ||
machine_has_neponset() ||
@@ -51,220 +137,121 @@ static void sa1111_start_hc(struct sa1111_dev *dev)
* host controller in reset.
*/
sa1111_writel(usb_rst | USB_RESET_FORCEIFRESET | USB_RESET_FORCEHCRESET,
- dev->mapbase + SA1111_USB_RESET);
+ dev->mapbase + USB_RESET);
/*
* Now, carefully enable the USB clock, and take
* the USB host controller out of reset.
*/
- sa1111_enable_device(dev);
- udelay(11);
- sa1111_writel(usb_rst, dev->mapbase + SA1111_USB_RESET);
+ ret = sa1111_enable_device(dev);
+ if (ret == 0) {
+ udelay(11);
+ sa1111_writel(usb_rst, dev->mapbase + USB_RESET);
+ }
+
+ return ret;
}
static void sa1111_stop_hc(struct sa1111_dev *dev)
{
unsigned int usb_rst;
- printk(KERN_DEBUG "%s: stopping SA-1111 OHCI USB Controller\n",
- __FILE__);
+
+ dev_dbg(&dev->dev, "stopping SA-1111 OHCI USB Controller\n");
/*
* Put the USB host controller into reset.
*/
- usb_rst = sa1111_readl(dev->mapbase + SA1111_USB_RESET);
+ usb_rst = sa1111_readl(dev->mapbase + USB_RESET);
sa1111_writel(usb_rst | USB_RESET_FORCEIFRESET | USB_RESET_FORCEHCRESET,
- dev->mapbase + SA1111_USB_RESET);
+ dev->mapbase + USB_RESET);
/*
* Stop the USB clock.
*/
sa1111_disable_device(dev);
-
-#ifdef CONFIG_SA1100_BADGE4
- if (machine_is_badge4()) {
- /* Disable power to the USB bus */
- badge4_set_5V(BADGE4_5V_USB, 0);
- }
-#endif
-}
-
-
-/*-------------------------------------------------------------------------*/
-
-#if 0
-static void dump_hci_status(struct usb_hcd *hcd, const char *label)
-{
- unsigned long status = sa1111_readl(hcd->regs + SA1111_USB_STATUS);
-
- dbg ("%s USB_STATUS = { %s%s%s%s%s}", label,
- ((status & USB_STATUS_IRQHCIRMTWKUP) ? "IRQHCIRMTWKUP " : ""),
- ((status & USB_STATUS_IRQHCIBUFFACC) ? "IRQHCIBUFFACC " : ""),
- ((status & USB_STATUS_NIRQHCIM) ? "" : "IRQHCIM "),
- ((status & USB_STATUS_NHCIMFCLR) ? "" : "HCIMFCLR "),
- ((status & USB_STATUS_USBPWRSENSE) ? "USBPWRSENSE " : ""));
}
-#endif
-
-/*-------------------------------------------------------------------------*/
-
-/* configure so an HC device and id are always provided */
-/* always called with process context; sleeping is OK */
-
/**
- * usb_hcd_sa1111_probe - initialize SA-1111-based HCDs
- * Context: !in_interrupt()
+ * ohci_hcd_sa1111_probe - initialize SA-1111-based HCDs
*
* Allocates basic resources for this USB host controller, and
- * then invokes the start() method for the HCD associated with it
- * through the hotplug entry's driver_data.
- *
- * Store this function in the HCD's struct pci_driver as probe().
+ * then invokes the start() method for the HCD associated with it.
*/
-int usb_hcd_sa1111_probe (const struct hc_driver *driver,
- struct sa1111_dev *dev)
+static int ohci_hcd_sa1111_probe(struct sa1111_dev *dev)
{
struct usb_hcd *hcd;
- int retval;
+ int ret;
- hcd = usb_create_hcd (driver, &dev->dev, "sa1111");
+ if (usb_disabled())
+ return -ENODEV;
+
+ hcd = usb_create_hcd(&ohci_sa1111_hc_driver, &dev->dev, "sa1111");
if (!hcd)
return -ENOMEM;
+
hcd->rsrc_start = dev->res.start;
hcd->rsrc_len = resource_size(&dev->res);
if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) {
dbg("request_mem_region failed");
- retval = -EBUSY;
+ ret = -EBUSY;
goto err1;
}
+
hcd->regs = dev->mapbase;
- sa1111_start_hc(dev);
- ohci_hcd_init(hcd_to_ohci(hcd));
+ ret = sa1111_start_hc(dev);
+ if (ret)
+ goto err2;
- retval = usb_add_hcd(hcd, dev->irq[1], 0);
- if (retval == 0)
- return retval;
+ ret = usb_add_hcd(hcd, dev->irq[1], 0);
+ if (ret == 0)
+ return ret;
sa1111_stop_hc(dev);
+ err2:
release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
err1:
usb_put_hcd(hcd);
- return retval;
+ return ret;
}
-
-/* may be called without controller electrically present */
-/* may be called with controller, bus, and devices active */
-
/**
- * usb_hcd_sa1111_remove - shutdown processing for SA-1111-based HCDs
+ * ohci_hcd_sa1111_remove - shutdown processing for SA-1111-based HCDs
* @dev: USB Host Controller being removed
- * Context: !in_interrupt()
- *
- * Reverses the effect of usb_hcd_sa1111_probe(), first invoking
- * the HCD's stop() method. It is always called from a thread
- * context, normally "rmmod", "apmd", or something similar.
*
+ * Reverses the effect of ohci_hcd_sa1111_probe(), first invoking
+ * the HCD's stop() method.
*/
-void usb_hcd_sa1111_remove (struct usb_hcd *hcd, struct sa1111_dev *dev)
+static int ohci_hcd_sa1111_remove(struct sa1111_dev *dev)
{
+ struct usb_hcd *hcd = sa1111_get_drvdata(dev);
+
usb_remove_hcd(hcd);
sa1111_stop_hc(dev);
release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
usb_put_hcd(hcd);
-}
-
-/*-------------------------------------------------------------------------*/
-static int __devinit
-ohci_sa1111_start (struct usb_hcd *hcd)
-{
- struct ohci_hcd *ohci = hcd_to_ohci (hcd);
- int ret;
-
- if ((ret = ohci_init(ohci)) < 0)
- return ret;
-
- if ((ret = ohci_run (ohci)) < 0) {
- err ("can't start %s", hcd->self.bus_name);
- ohci_stop (hcd);
- return ret;
- }
return 0;
}
-/*-------------------------------------------------------------------------*/
-
-static const struct hc_driver ohci_sa1111_hc_driver = {
- .description = hcd_name,
- .product_desc = "SA-1111 OHCI",
- .hcd_priv_size = sizeof(struct ohci_hcd),
-
- /*
- * generic hardware linkage
- */
- .irq = ohci_irq,
- .flags = HCD_USB11 | HCD_MEMORY,
-
- /*
- * basic lifecycle operations
- */
- .start = ohci_sa1111_start,
- .stop = ohci_stop,
-
- /*
- * managing i/o requests and associated device resources
- */
- .urb_enqueue = ohci_urb_enqueue,
- .urb_dequeue = ohci_urb_dequeue,
- .endpoint_disable = ohci_endpoint_disable,
-
- /*
- * scheduling support
- */
- .get_frame_number = ohci_get_frame,
-
- /*
- * root hub support
- */
- .hub_status_data = ohci_hub_status_data,
- .hub_control = ohci_hub_control,
-#ifdef CONFIG_PM
- .bus_suspend = ohci_bus_suspend,
- .bus_resume = ohci_bus_resume,
-#endif
- .start_port_reset = ohci_start_port_reset,
-};
-
-/*-------------------------------------------------------------------------*/
-
-static int ohci_hcd_sa1111_drv_probe(struct sa1111_dev *dev)
-{
- int ret;
-
- if (usb_disabled())
- return -ENODEV;
-
- ret = usb_hcd_sa1111_probe(&ohci_sa1111_hc_driver, dev);
- return ret;
-}
-
-static int ohci_hcd_sa1111_drv_remove(struct sa1111_dev *dev)
+static void ohci_hcd_sa1111_shutdown(struct sa1111_dev *dev)
{
struct usb_hcd *hcd = sa1111_get_drvdata(dev);
- usb_hcd_sa1111_remove(hcd, dev);
- return 0;
+ if (test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)) {
+ hcd->driver->shutdown(hcd);
+ sa1111_stop_hc(dev);
+ }
}
static struct sa1111_driver ohci_hcd_sa1111_driver = {
.drv = {
.name = "sa1111-ohci",
+ .owner = THIS_MODULE,
},
.devid = SA1111_DEVID_USB,
- .probe = ohci_hcd_sa1111_drv_probe,
- .remove = ohci_hcd_sa1111_drv_remove,
+ .probe = ohci_hcd_sa1111_probe,
+ .remove = ohci_hcd_sa1111_remove,
+ .shutdown = ohci_hcd_sa1111_shutdown,
};
-
diff --git a/drivers/video/sa1100fb.c b/drivers/video/sa1100fb.c
index 98d55d0e2da..b6325848ad6 100644
--- a/drivers/video/sa1100fb.c
+++ b/drivers/video/sa1100fb.c
@@ -173,282 +173,48 @@
#include <linux/init.h>
#include <linux/ioport.h>
#include <linux/cpufreq.h>
+#include <linux/gpio.h>
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
#include <linux/mutex.h>
#include <linux/io.h>
+#include <video/sa1100fb.h>
+
#include <mach/hardware.h>
#include <asm/mach-types.h>
-#include <mach/assabet.h>
#include <mach/shannon.h>
/*
- * debugging?
- */
-#define DEBUG 0
-/*
* Complain if VAR is out of range.
*/
#define DEBUG_VAR 1
-#undef ASSABET_PAL_VIDEO
-
#include "sa1100fb.h"
-extern void (*sa1100fb_backlight_power)(int on);
-extern void (*sa1100fb_lcd_power)(int on);
-
-static struct sa1100fb_rgb rgb_4 = {
+static const struct sa1100fb_rgb rgb_4 = {
.red = { .offset = 0, .length = 4, },
.green = { .offset = 0, .length = 4, },
.blue = { .offset = 0, .length = 4, },
.transp = { .offset = 0, .length = 0, },
};
-static struct sa1100fb_rgb rgb_8 = {
+static const struct sa1100fb_rgb rgb_8 = {
.red = { .offset = 0, .length = 8, },
.green = { .offset = 0, .length = 8, },
.blue = { .offset = 0, .length = 8, },
.transp = { .offset = 0, .length = 0, },
};
-static struct sa1100fb_rgb def_rgb_16 = {
+static const struct sa1100fb_rgb def_rgb_16 = {
.red = { .offset = 11, .length = 5, },
.green = { .offset = 5, .length = 6, },
.blue = { .offset = 0, .length = 5, },
.transp = { .offset = 0, .length = 0, },
};
-#ifdef CONFIG_SA1100_ASSABET
-#ifndef ASSABET_PAL_VIDEO
-/*
- * The assabet uses a sharp LQ039Q2DS54 LCD module. It is actually
- * takes an RGB666 signal, but we provide it with an RGB565 signal
- * instead (def_rgb_16).
- */
-static struct sa1100fb_mach_info lq039q2ds54_info __initdata = {
- .pixclock = 171521, .bpp = 16,
- .xres = 320, .yres = 240,
-
- .hsync_len = 5, .vsync_len = 1,
- .left_margin = 61, .upper_margin = 3,
- .right_margin = 9, .lower_margin = 0,
-
- .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-
- .lccr0 = LCCR0_Color | LCCR0_Sngl | LCCR0_Act,
- .lccr3 = LCCR3_OutEnH | LCCR3_PixRsEdg | LCCR3_ACBsDiv(2),
-};
-#else
-static struct sa1100fb_mach_info pal_info __initdata = {
- .pixclock = 67797, .bpp = 16,
- .xres = 640, .yres = 512,
-
- .hsync_len = 64, .vsync_len = 6,
- .left_margin = 125, .upper_margin = 70,
- .right_margin = 115, .lower_margin = 36,
-
- .lccr0 = LCCR0_Color | LCCR0_Sngl | LCCR0_Act,
- .lccr3 = LCCR3_OutEnH | LCCR3_PixRsEdg | LCCR3_ACBsDiv(512),
-};
-#endif
-#endif
-
-#ifdef CONFIG_SA1100_H3600
-static struct sa1100fb_mach_info h3600_info __initdata = {
- .pixclock = 174757, .bpp = 16,
- .xres = 320, .yres = 240,
-
- .hsync_len = 3, .vsync_len = 3,
- .left_margin = 12, .upper_margin = 10,
- .right_margin = 17, .lower_margin = 1,
-
- .cmap_static = 1,
-
- .lccr0 = LCCR0_Color | LCCR0_Sngl | LCCR0_Act,
- .lccr3 = LCCR3_OutEnH | LCCR3_PixRsEdg | LCCR3_ACBsDiv(2),
-};
-
-static struct sa1100fb_rgb h3600_rgb_16 = {
- .red = { .offset = 12, .length = 4, },
- .green = { .offset = 7, .length = 4, },
- .blue = { .offset = 1, .length = 4, },
- .transp = { .offset = 0, .length = 0, },
-};
-#endif
-
-#ifdef CONFIG_SA1100_H3100
-static struct sa1100fb_mach_info h3100_info __initdata = {
- .pixclock = 406977, .bpp = 4,
- .xres = 320, .yres = 240,
-
- .hsync_len = 26, .vsync_len = 41,
- .left_margin = 4, .upper_margin = 0,
- .right_margin = 4, .lower_margin = 0,
-
- .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
- .cmap_greyscale = 1,
- .cmap_inverse = 1,
-
- .lccr0 = LCCR0_Mono | LCCR0_4PixMono | LCCR0_Sngl | LCCR0_Pas,
- .lccr3 = LCCR3_OutEnH | LCCR3_PixRsEdg | LCCR3_ACBsDiv(2),
-};
-#endif
-
-#ifdef CONFIG_SA1100_COLLIE
-static struct sa1100fb_mach_info collie_info __initdata = {
- .pixclock = 171521, .bpp = 16,
- .xres = 320, .yres = 240,
-
- .hsync_len = 5, .vsync_len = 1,
- .left_margin = 11, .upper_margin = 2,
- .right_margin = 30, .lower_margin = 0,
-
- .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-
- .lccr0 = LCCR0_Color | LCCR0_Sngl | LCCR0_Act,
- .lccr3 = LCCR3_OutEnH | LCCR3_PixRsEdg | LCCR3_ACBsDiv(2),
-};
-#endif
-
-#ifdef LART_GREY_LCD
-static struct sa1100fb_mach_info lart_grey_info __initdata = {
- .pixclock = 150000, .bpp = 4,
- .xres = 320, .yres = 240,
-
- .hsync_len = 1, .vsync_len = 1,
- .left_margin = 4, .upper_margin = 0,
- .right_margin = 2, .lower_margin = 0,
-
- .cmap_greyscale = 1,
- .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-
- .lccr0 = LCCR0_Mono | LCCR0_Sngl | LCCR0_Pas | LCCR0_4PixMono,
- .lccr3 = LCCR3_OutEnH | LCCR3_PixRsEdg | LCCR3_ACBsDiv(512),
-};
-#endif
-#ifdef LART_COLOR_LCD
-static struct sa1100fb_mach_info lart_color_info __initdata = {
- .pixclock = 150000, .bpp = 16,
- .xres = 320, .yres = 240,
-
- .hsync_len = 2, .vsync_len = 3,
- .left_margin = 69, .upper_margin = 14,
- .right_margin = 8, .lower_margin = 4,
-
- .lccr0 = LCCR0_Color | LCCR0_Sngl | LCCR0_Act,
- .lccr3 = LCCR3_OutEnH | LCCR3_PixFlEdg | LCCR3_ACBsDiv(512),
-};
-#endif
-#ifdef LART_VIDEO_OUT
-static struct sa1100fb_mach_info lart_video_info __initdata = {
- .pixclock = 39721, .bpp = 16,
- .xres = 640, .yres = 480,
-
- .hsync_len = 95, .vsync_len = 2,
- .left_margin = 40, .upper_margin = 32,
- .right_margin = 24, .lower_margin = 11,
-
- .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-
- .lccr0 = LCCR0_Color | LCCR0_Sngl | LCCR0_Act,
- .lccr3 = LCCR3_OutEnL | LCCR3_PixFlEdg | LCCR3_ACBsDiv(512),
-};
-#endif
-
-#ifdef LART_KIT01_LCD
-static struct sa1100fb_mach_info lart_kit01_info __initdata = {
- .pixclock = 63291, .bpp = 16,
- .xres = 640, .yres = 480,
-
- .hsync_len = 64, .vsync_len = 3,
- .left_margin = 122, .upper_margin = 45,
- .right_margin = 10, .lower_margin = 10,
-
- .lccr0 = LCCR0_Color | LCCR0_Sngl | LCCR0_Act,
- .lccr3 = LCCR3_OutEnH | LCCR3_PixFlEdg
-};
-#endif
-
-#ifdef CONFIG_SA1100_SHANNON
-static struct sa1100fb_mach_info shannon_info __initdata = {
- .pixclock = 152500, .bpp = 8,
- .xres = 640, .yres = 480,
-
- .hsync_len = 4, .vsync_len = 3,
- .left_margin = 2, .upper_margin = 0,
- .right_margin = 1, .lower_margin = 0,
-
- .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-
- .lccr0 = LCCR0_Color | LCCR0_Dual | LCCR0_Pas,
- .lccr3 = LCCR3_ACBsDiv(512),
-};
-#endif
-
-static struct sa1100fb_mach_info * __init
-sa1100fb_get_machine_info(struct sa1100fb_info *fbi)
-{
- struct sa1100fb_mach_info *inf = NULL;
-
- /*
- * R G B T
- * default {11,5}, { 5,6}, { 0,5}, { 0,0}
- * h3600 {12,4}, { 7,4}, { 1,4}, { 0,0}
- * freebird { 8,4}, { 4,4}, { 0,4}, {12,4}
- */
-#ifdef CONFIG_SA1100_ASSABET
- if (machine_is_assabet()) {
-#ifndef ASSABET_PAL_VIDEO
- inf = &lq039q2ds54_info;
-#else
- inf = &pal_info;
-#endif
- }
-#endif
-#ifdef CONFIG_SA1100_H3100
- if (machine_is_h3100()) {
- inf = &h3100_info;
- }
-#endif
-#ifdef CONFIG_SA1100_H3600
- if (machine_is_h3600()) {
- inf = &h3600_info;
- fbi->rgb[RGB_16] = &h3600_rgb_16;
- }
-#endif
-#ifdef CONFIG_SA1100_COLLIE
- if (machine_is_collie()) {
- inf = &collie_info;
- }
-#endif
-#ifdef CONFIG_SA1100_LART
- if (machine_is_lart()) {
-#ifdef LART_GREY_LCD
- inf = &lart_grey_info;
-#endif
-#ifdef LART_COLOR_LCD
- inf = &lart_color_info;
-#endif
-#ifdef LART_VIDEO_OUT
- inf = &lart_video_info;
-#endif
-#ifdef LART_KIT01_LCD
- inf = &lart_kit01_info;
-#endif
- }
-#endif
-#ifdef CONFIG_SA1100_SHANNON
- if (machine_is_shannon()) {
- inf = &shannon_info;
- }
-#endif
- return inf;
-}
-
static int sa1100fb_activate_var(struct fb_var_screeninfo *var, struct sa1100fb_info *);
static void set_ctrlr_state(struct sa1100fb_info *fbi, u_int state);
@@ -533,7 +299,7 @@ sa1100fb_setcolreg(u_int regno, u_int red, u_int green, u_int blue,
* is what you poke into the framebuffer to produce the
* colour you requested.
*/
- if (fbi->cmap_inverse) {
+ if (fbi->inf->cmap_inverse) {
red = 0xffff - red;
green = 0xffff - green;
blue = 0xffff - blue;
@@ -607,14 +373,14 @@ sa1100fb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
var->xres = MIN_XRES;
if (var->yres < MIN_YRES)
var->yres = MIN_YRES;
- if (var->xres > fbi->max_xres)
- var->xres = fbi->max_xres;
- if (var->yres > fbi->max_yres)
- var->yres = fbi->max_yres;
+ if (var->xres > fbi->inf->xres)
+ var->xres = fbi->inf->xres;
+ if (var->yres > fbi->inf->yres)
+ var->yres = fbi->inf->yres;
var->xres_virtual = max(var->xres_virtual, var->xres);
var->yres_virtual = max(var->yres_virtual, var->yres);
- DPRINTK("var->bits_per_pixel=%d\n", var->bits_per_pixel);
+ dev_dbg(fbi->dev, "var->bits_per_pixel=%d\n", var->bits_per_pixel);
switch (var->bits_per_pixel) {
case 4:
rgbidx = RGB_4;
@@ -638,16 +404,16 @@ sa1100fb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
var->blue = fbi->rgb[rgbidx]->blue;
var->transp = fbi->rgb[rgbidx]->transp;
- DPRINTK("RGBT length = %d:%d:%d:%d\n",
+ dev_dbg(fbi->dev, "RGBT length = %d:%d:%d:%d\n",
var->red.length, var->green.length, var->blue.length,
var->transp.length);
- DPRINTK("RGBT offset = %d:%d:%d:%d\n",
+ dev_dbg(fbi->dev, "RGBT offset = %d:%d:%d:%d\n",
var->red.offset, var->green.offset, var->blue.offset,
var->transp.offset);
#ifdef CONFIG_CPU_FREQ
- printk(KERN_DEBUG "dma period = %d ps, clock = %d kHz\n",
+ dev_dbg(fbi->dev, "dma period = %d ps, clock = %d kHz\n",
sa1100fb_display_dma_period(var),
cpufreq_get(smp_processor_id()));
#endif
@@ -655,22 +421,10 @@ sa1100fb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
return 0;
}
-static inline void sa1100fb_set_truecolor(u_int is_true_color)
+static void sa1100fb_set_visual(struct sa1100fb_info *fbi, u32 visual)
{
- if (machine_is_assabet()) {
-#if 1 // phase 4 or newer Assabet's
- if (is_true_color)
- ASSABET_BCR_set(ASSABET_BCR_LCD_12RGB);
- else
- ASSABET_BCR_clear(ASSABET_BCR_LCD_12RGB);
-#else
- // older Assabet's
- if (is_true_color)
- ASSABET_BCR_clear(ASSABET_BCR_LCD_12RGB);
- else
- ASSABET_BCR_set(ASSABET_BCR_LCD_12RGB);
-#endif
- }
+ if (fbi->inf->set_visual)
+ fbi->inf->set_visual(visual);
}
/*
@@ -683,11 +437,11 @@ static int sa1100fb_set_par(struct fb_info *info)
struct fb_var_screeninfo *var = &info->var;
unsigned long palette_mem_size;
- DPRINTK("set_par\n");
+ dev_dbg(fbi->dev, "set_par\n");
if (var->bits_per_pixel == 16)
fbi->fb.fix.visual = FB_VISUAL_TRUECOLOR;
- else if (!fbi->cmap_static)
+ else if (!fbi->inf->cmap_static)
fbi->fb.fix.visual = FB_VISUAL_PSEUDOCOLOR;
else {
/*
@@ -704,7 +458,7 @@ static int sa1100fb_set_par(struct fb_info *info)
palette_mem_size = fbi->palette_size * sizeof(u16);
- DPRINTK("palette_mem_size = 0x%08lx\n", (u_long) palette_mem_size);
+ dev_dbg(fbi->dev, "palette_mem_size = 0x%08lx\n", palette_mem_size);
fbi->palette_cpu = (u16 *)(fbi->map_cpu + PAGE_SIZE - palette_mem_size);
fbi->palette_dma = fbi->map_dma + PAGE_SIZE - palette_mem_size;
@@ -712,7 +466,7 @@ static int sa1100fb_set_par(struct fb_info *info)
/*
* Set (any) board control register to handle new color depth
*/
- sa1100fb_set_truecolor(fbi->fb.fix.visual == FB_VISUAL_TRUECOLOR);
+ sa1100fb_set_visual(fbi, fbi->fb.fix.visual);
sa1100fb_activate_var(var, fbi);
return 0;
@@ -728,7 +482,7 @@ sa1100fb_set_cmap(struct fb_cmap *cmap, int kspc, int con,
/*
* Make sure the user isn't doing something stupid.
*/
- if (!kspc && (fbi->fb.var.bits_per_pixel == 16 || fbi->cmap_static))
+ if (!kspc && (fbi->fb.var.bits_per_pixel == 16 || fbi->inf->cmap_static))
return -EINVAL;
return gen_set_cmap(cmap, kspc, con, info);
@@ -775,7 +529,7 @@ static int sa1100fb_blank(int blank, struct fb_info *info)
struct sa1100fb_info *fbi = (struct sa1100fb_info *)info;
int i;
- DPRINTK("sa1100fb_blank: blank=%d\n", blank);
+ dev_dbg(fbi->dev, "sa1100fb_blank: blank=%d\n", blank);
switch (blank) {
case FB_BLANK_POWERDOWN:
@@ -863,43 +617,43 @@ static int sa1100fb_activate_var(struct fb_var_screeninfo *var, struct sa1100fb_
u_int half_screen_size, yres, pcd;
u_long flags;
- DPRINTK("Configuring SA1100 LCD\n");
+ dev_dbg(fbi->dev, "Configuring SA1100 LCD\n");
- DPRINTK("var: xres=%d hslen=%d lm=%d rm=%d\n",
+ dev_dbg(fbi->dev, "var: xres=%d hslen=%d lm=%d rm=%d\n",
var->xres, var->hsync_len,
var->left_margin, var->right_margin);
- DPRINTK("var: yres=%d vslen=%d um=%d bm=%d\n",
+ dev_dbg(fbi->dev, "var: yres=%d vslen=%d um=%d bm=%d\n",
var->yres, var->vsync_len,
var->upper_margin, var->lower_margin);
#if DEBUG_VAR
if (var->xres < 16 || var->xres > 1024)
- printk(KERN_ERR "%s: invalid xres %d\n",
+ dev_err(fbi->dev, "%s: invalid xres %d\n",
fbi->fb.fix.id, var->xres);
if (var->hsync_len < 1 || var->hsync_len > 64)
- printk(KERN_ERR "%s: invalid hsync_len %d\n",
+ dev_err(fbi->dev, "%s: invalid hsync_len %d\n",
fbi->fb.fix.id, var->hsync_len);
if (var->left_margin < 1 || var->left_margin > 255)
- printk(KERN_ERR "%s: invalid left_margin %d\n",
+ dev_err(fbi->dev, "%s: invalid left_margin %d\n",
fbi->fb.fix.id, var->left_margin);
if (var->right_margin < 1 || var->right_margin > 255)
- printk(KERN_ERR "%s: invalid right_margin %d\n",
+ dev_err(fbi->dev, "%s: invalid right_margin %d\n",
fbi->fb.fix.id, var->right_margin);
if (var->yres < 1 || var->yres > 1024)
- printk(KERN_ERR "%s: invalid yres %d\n",
+ dev_err(fbi->dev, "%s: invalid yres %d\n",
fbi->fb.fix.id, var->yres);
if (var->vsync_len < 1 || var->vsync_len > 64)
- printk(KERN_ERR "%s: invalid vsync_len %d\n",
+ dev_err(fbi->dev, "%s: invalid vsync_len %d\n",
fbi->fb.fix.id, var->vsync_len);
if (var->upper_margin < 0 || var->upper_margin > 255)
- printk(KERN_ERR "%s: invalid upper_margin %d\n",
+ dev_err(fbi->dev, "%s: invalid upper_margin %d\n",
fbi->fb.fix.id, var->upper_margin);
if (var->lower_margin < 0 || var->lower_margin > 255)
- printk(KERN_ERR "%s: invalid lower_margin %d\n",
+ dev_err(fbi->dev, "%s: invalid lower_margin %d\n",
fbi->fb.fix.id, var->lower_margin);
#endif
- new_regs.lccr0 = fbi->lccr0 |
+ new_regs.lccr0 = fbi->inf->lccr0 |
LCCR0_LEN | LCCR0_LDM | LCCR0_BAM |
LCCR0_ERM | LCCR0_LtlEnd | LCCR0_DMADel(0);
@@ -914,7 +668,7 @@ static int sa1100fb_activate_var(struct fb_var_screeninfo *var, struct sa1100fb_
* the YRES parameter.
*/
yres = var->yres;
- if (fbi->lccr0 & LCCR0_Dual)
+ if (fbi->inf->lccr0 & LCCR0_Dual)
yres /= 2;
new_regs.lccr2 =
@@ -924,14 +678,14 @@ static int sa1100fb_activate_var(struct fb_var_screeninfo *var, struct sa1100fb_
LCCR2_EndFrmDel(var->lower_margin);
pcd = get_pcd(var->pixclock, cpufreq_get(0));
- new_regs.lccr3 = LCCR3_PixClkDiv(pcd) | fbi->lccr3 |
+ new_regs.lccr3 = LCCR3_PixClkDiv(pcd) | fbi->inf->lccr3 |
(var->sync & FB_SYNC_HOR_HIGH_ACT ? LCCR3_HorSnchH : LCCR3_HorSnchL) |
(var->sync & FB_SYNC_VERT_HIGH_ACT ? LCCR3_VrtSnchH : LCCR3_VrtSnchL);
- DPRINTK("nlccr0 = 0x%08lx\n", new_regs.lccr0);
- DPRINTK("nlccr1 = 0x%08lx\n", new_regs.lccr1);
- DPRINTK("nlccr2 = 0x%08lx\n", new_regs.lccr2);
- DPRINTK("nlccr3 = 0x%08lx\n", new_regs.lccr3);
+ dev_dbg(fbi->dev, "nlccr0 = 0x%08lx\n", new_regs.lccr0);
+ dev_dbg(fbi->dev, "nlccr1 = 0x%08lx\n", new_regs.lccr1);
+ dev_dbg(fbi->dev, "nlccr2 = 0x%08lx\n", new_regs.lccr2);
+ dev_dbg(fbi->dev, "nlccr3 = 0x%08lx\n", new_regs.lccr3);
half_screen_size = var->bits_per_pixel;
half_screen_size = half_screen_size * var->xres * var->yres / 16;
@@ -951,9 +705,12 @@ static int sa1100fb_activate_var(struct fb_var_screeninfo *var, struct sa1100fb_
* Only update the registers if the controller is enabled
* and something has changed.
*/
- if ((LCCR0 != fbi->reg_lccr0) || (LCCR1 != fbi->reg_lccr1) ||
- (LCCR2 != fbi->reg_lccr2) || (LCCR3 != fbi->reg_lccr3) ||
- (DBAR1 != fbi->dbar1) || (DBAR2 != fbi->dbar2))
+ if (readl_relaxed(fbi->base + LCCR0) != fbi->reg_lccr0 ||
+ readl_relaxed(fbi->base + LCCR1) != fbi->reg_lccr1 ||
+ readl_relaxed(fbi->base + LCCR2) != fbi->reg_lccr2 ||
+ readl_relaxed(fbi->base + LCCR3) != fbi->reg_lccr3 ||
+ readl_relaxed(fbi->base + DBAR1) != fbi->dbar1 ||
+ readl_relaxed(fbi->base + DBAR2) != fbi->dbar2)
sa1100fb_schedule_work(fbi, C_REENABLE);
return 0;
@@ -967,18 +724,18 @@ static int sa1100fb_activate_var(struct fb_var_screeninfo *var, struct sa1100fb_
*/
static inline void __sa1100fb_backlight_power(struct sa1100fb_info *fbi, int on)
{
- DPRINTK("backlight o%s\n", on ? "n" : "ff");
+ dev_dbg(fbi->dev, "backlight o%s\n", on ? "n" : "ff");
- if (sa1100fb_backlight_power)
- sa1100fb_backlight_power(on);
+ if (fbi->inf->backlight_power)
+ fbi->inf->backlight_power(on);
}
static inline void __sa1100fb_lcd_power(struct sa1100fb_info *fbi, int on)
{
- DPRINTK("LCD power o%s\n", on ? "n" : "ff");
+ dev_dbg(fbi->dev, "LCD power o%s\n", on ? "n" : "ff");
- if (sa1100fb_lcd_power)
- sa1100fb_lcd_power(on);
+ if (fbi->inf->lcd_power)
+ fbi->inf->lcd_power(on);
}
static void sa1100fb_setup_gpio(struct sa1100fb_info *fbi)
@@ -1008,14 +765,25 @@ static void sa1100fb_setup_gpio(struct sa1100fb_info *fbi)
}
if (mask) {
+ unsigned long flags;
+
+ /*
+ * SA-1100 requires the GPIO direction register set
+ * appropriately for the alternate function. Hence
+ * we set it here via bitmask rather than excessive
+ * fiddling via the GPIO subsystem - and even then
+ * we'll still have to deal with GAFR.
+ */
+ local_irq_save(flags);
GPDR |= mask;
GAFR |= mask;
+ local_irq_restore(flags);
}
}
static void sa1100fb_enable_controller(struct sa1100fb_info *fbi)
{
- DPRINTK("Enabling LCD controller\n");
+ dev_dbg(fbi->dev, "Enabling LCD controller\n");
/*
* Make sure the mode bits are present in the first palette entry
@@ -1024,43 +792,46 @@ static void sa1100fb_enable_controller(struct sa1100fb_info *fbi)
fbi->palette_cpu[0] |= palette_pbs(&fbi->fb.var);
/* Sequence from 11.7.10 */
- LCCR3 = fbi->reg_lccr3;
- LCCR2 = fbi->reg_lccr2;
- LCCR1 = fbi->reg_lccr1;
- LCCR0 = fbi->reg_lccr0 & ~LCCR0_LEN;
- DBAR1 = fbi->dbar1;
- DBAR2 = fbi->dbar2;
- LCCR0 |= LCCR0_LEN;
-
- if (machine_is_shannon()) {
- GPDR |= SHANNON_GPIO_DISP_EN;
- GPSR |= SHANNON_GPIO_DISP_EN;
- }
-
- DPRINTK("DBAR1 = 0x%08x\n", DBAR1);
- DPRINTK("DBAR2 = 0x%08x\n", DBAR2);
- DPRINTK("LCCR0 = 0x%08x\n", LCCR0);
- DPRINTK("LCCR1 = 0x%08x\n", LCCR1);
- DPRINTK("LCCR2 = 0x%08x\n", LCCR2);
- DPRINTK("LCCR3 = 0x%08x\n", LCCR3);
+ writel_relaxed(fbi->reg_lccr3, fbi->base + LCCR3);
+ writel_relaxed(fbi->reg_lccr2, fbi->base + LCCR2);
+ writel_relaxed(fbi->reg_lccr1, fbi->base + LCCR1);
+ writel_relaxed(fbi->reg_lccr0 & ~LCCR0_LEN, fbi->base + LCCR0);
+ writel_relaxed(fbi->dbar1, fbi->base + DBAR1);
+ writel_relaxed(fbi->dbar2, fbi->base + DBAR2);
+ writel_relaxed(fbi->reg_lccr0 | LCCR0_LEN, fbi->base + LCCR0);
+
+ if (machine_is_shannon())
+ gpio_set_value(SHANNON_GPIO_DISP_EN, 1);
+
+ dev_dbg(fbi->dev, "DBAR1: 0x%08x\n", readl_relaxed(fbi->base + DBAR1));
+ dev_dbg(fbi->dev, "DBAR2: 0x%08x\n", readl_relaxed(fbi->base + DBAR2));
+ dev_dbg(fbi->dev, "LCCR0: 0x%08x\n", readl_relaxed(fbi->base + LCCR0));
+ dev_dbg(fbi->dev, "LCCR1: 0x%08x\n", readl_relaxed(fbi->base + LCCR1));
+ dev_dbg(fbi->dev, "LCCR2: 0x%08x\n", readl_relaxed(fbi->base + LCCR2));
+ dev_dbg(fbi->dev, "LCCR3: 0x%08x\n", readl_relaxed(fbi->base + LCCR3));
}
static void sa1100fb_disable_controller(struct sa1100fb_info *fbi)
{
DECLARE_WAITQUEUE(wait, current);
+ u32 lccr0;
- DPRINTK("Disabling LCD controller\n");
+ dev_dbg(fbi->dev, "Disabling LCD controller\n");
- if (machine_is_shannon()) {
- GPCR |= SHANNON_GPIO_DISP_EN;
- }
+ if (machine_is_shannon())
+ gpio_set_value(SHANNON_GPIO_DISP_EN, 0);
set_current_state(TASK_UNINTERRUPTIBLE);
add_wait_queue(&fbi->ctrlr_wait, &wait);
- LCSR = 0xffffffff; /* Clear LCD Status Register */
- LCCR0 &= ~LCCR0_LDM; /* Enable LCD Disable Done Interrupt */
- LCCR0 &= ~LCCR0_LEN; /* Disable LCD Controller */
+ /* Clear LCD Status Register */
+ writel_relaxed(~0, fbi->base + LCSR);
+
+ lccr0 = readl_relaxed(fbi->base + LCCR0);
+ lccr0 &= ~LCCR0_LDM; /* Enable LCD Disable Done Interrupt */
+ writel_relaxed(lccr0, fbi->base + LCCR0);
+ lccr0 &= ~LCCR0_LEN; /* Disable LCD Controller */
+ writel_relaxed(lccr0, fbi->base + LCCR0);
schedule_timeout(20 * HZ / 1000);
remove_wait_queue(&fbi->ctrlr_wait, &wait);
@@ -1072,14 +843,15 @@ static void sa1100fb_disable_controller(struct sa1100fb_info *fbi)
static irqreturn_t sa1100fb_handle_irq(int irq, void *dev_id)
{
struct sa1100fb_info *fbi = dev_id;
- unsigned int lcsr = LCSR;
+ unsigned int lcsr = readl_relaxed(fbi->base + LCSR);
if (lcsr & LCSR_LDD) {
- LCCR0 |= LCCR0_LDM;
+ u32 lccr0 = readl_relaxed(fbi->base + LCCR0) | LCCR0_LDM;
+ writel_relaxed(lccr0, fbi->base + LCCR0);
wake_up(&fbi->ctrlr_wait);
}
- LCSR = lcsr;
+ writel_relaxed(lcsr, fbi->base + LCSR);
return IRQ_HANDLED;
}
@@ -1268,7 +1040,7 @@ sa1100fb_freq_policy(struct notifier_block *nb, unsigned long val,
switch (val) {
case CPUFREQ_ADJUST:
case CPUFREQ_INCOMPATIBLE:
- printk(KERN_DEBUG "min dma period: %d ps, "
+ dev_dbg(fbi->dev, "min dma period: %d ps, "
"new clock %d kHz\n", sa1100fb_min_dma_period(fbi),
policy->max);
/* todo: fill in min/max values */
@@ -1318,7 +1090,7 @@ static int sa1100fb_resume(struct platform_device *dev)
* cache. Once this area is remapped, all virtual memory
* access to the video memory should occur at the new region.
*/
-static int __init sa1100fb_map_video_memory(struct sa1100fb_info *fbi)
+static int __devinit sa1100fb_map_video_memory(struct sa1100fb_info *fbi)
{
/*
* We reserve one page for the palette, plus the size
@@ -1344,7 +1116,7 @@ static int __init sa1100fb_map_video_memory(struct sa1100fb_info *fbi)
}
/* Fake monspecs to fill in fbinfo structure */
-static struct fb_monspecs monspecs __initdata = {
+static struct fb_monspecs monspecs __devinitdata = {
.hfmin = 30000,
.hfmax = 70000,
.vfmin = 50,
@@ -1352,10 +1124,11 @@ static struct fb_monspecs monspecs __initdata = {
};
-static struct sa1100fb_info * __init sa1100fb_init_fbinfo(struct device *dev)
+static struct sa1100fb_info * __devinit sa1100fb_init_fbinfo(struct device *dev)
{
- struct sa1100fb_mach_info *inf;
+ struct sa1100fb_mach_info *inf = dev->platform_data;
struct sa1100fb_info *fbi;
+ unsigned i;
fbi = kmalloc(sizeof(struct sa1100fb_info) + sizeof(u32) * 16,
GFP_KERNEL);
@@ -1390,8 +1163,6 @@ static struct sa1100fb_info * __init sa1100fb_init_fbinfo(struct device *dev)
fbi->rgb[RGB_8] = &rgb_8;
fbi->rgb[RGB_16] = &def_rgb_16;
- inf = sa1100fb_get_machine_info(fbi);
-
/*
* People just don't seem to get this. We don't support
* anything but correct entries now, so panic if someone
@@ -1402,13 +1173,10 @@ static struct sa1100fb_info * __init sa1100fb_init_fbinfo(struct device *dev)
panic("sa1100fb error: invalid LCCR3 fields set or zero "
"pixclock.");
- fbi->max_xres = inf->xres;
fbi->fb.var.xres = inf->xres;
fbi->fb.var.xres_virtual = inf->xres;
- fbi->max_yres = inf->yres;
fbi->fb.var.yres = inf->yres;
fbi->fb.var.yres_virtual = inf->yres;
- fbi->max_bpp = inf->bpp;
fbi->fb.var.bits_per_pixel = inf->bpp;
fbi->fb.var.pixclock = inf->pixclock;
fbi->fb.var.hsync_len = inf->hsync_len;
@@ -1419,14 +1187,16 @@ static struct sa1100fb_info * __init sa1100fb_init_fbinfo(struct device *dev)
fbi->fb.var.lower_margin = inf->lower_margin;
fbi->fb.var.sync = inf->sync;
fbi->fb.var.grayscale = inf->cmap_greyscale;
- fbi->cmap_inverse = inf->cmap_inverse;
- fbi->cmap_static = inf->cmap_static;
- fbi->lccr0 = inf->lccr0;
- fbi->lccr3 = inf->lccr3;
fbi->state = C_STARTUP;
fbi->task_state = (u_char)-1;
- fbi->fb.fix.smem_len = fbi->max_xres * fbi->max_yres *
- fbi->max_bpp / 8;
+ fbi->fb.fix.smem_len = inf->xres * inf->yres *
+ inf->bpp / 8;
+ fbi->inf = inf;
+
+ /* Copy the RGB bitfield overrides */
+ for (i = 0; i < NR_RGB; i++)
+ if (inf->rgb[i])
+ fbi->rgb[i] = inf->rgb[i];
init_waitqueue_head(&fbi->ctrlr_wait);
INIT_WORK(&fbi->task, sa1100fb_task);
@@ -1438,13 +1208,20 @@ static struct sa1100fb_info * __init sa1100fb_init_fbinfo(struct device *dev)
static int __devinit sa1100fb_probe(struct platform_device *pdev)
{
struct sa1100fb_info *fbi;
+ struct resource *res;
int ret, irq;
+ if (!pdev->dev.platform_data) {
+ dev_err(&pdev->dev, "no platform LCD data\n");
+ return -EINVAL;
+ }
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
irq = platform_get_irq(pdev, 0);
- if (irq < 0)
+ if (irq < 0 || !res)
return -EINVAL;
- if (!request_mem_region(0xb0100000, 0x10000, "LCD"))
+ if (!request_mem_region(res->start, resource_size(res), "LCD"))
return -EBUSY;
fbi = sa1100fb_init_fbinfo(&pdev->dev);
@@ -1452,6 +1229,10 @@ static int __devinit sa1100fb_probe(struct platform_device *pdev)
if (!fbi)
goto failed;
+ fbi->base = ioremap(res->start, resource_size(res));
+ if (!fbi->base)
+ goto failed;
+
/* Initialize video memory */
ret = sa1100fb_map_video_memory(fbi);
if (ret)
@@ -1459,14 +1240,16 @@ static int __devinit sa1100fb_probe(struct platform_device *pdev)
ret = request_irq(irq, sa1100fb_handle_irq, 0, "LCD", fbi);
if (ret) {
- printk(KERN_ERR "sa1100fb: request_irq failed: %d\n", ret);
+ dev_err(&pdev->dev, "request_irq failed: %d\n", ret);
goto failed;
}
-#ifdef ASSABET_PAL_VIDEO
- if (machine_is_assabet())
- ASSABET_BCR_clear(ASSABET_BCR_LCD_ON);
-#endif
+ if (machine_is_shannon()) {
+ ret = gpio_request_one(SHANNON_GPIO_DISP_EN,
+ GPIOF_OUT_INIT_LOW, "display enable");
+ if (ret)
+ goto err_free_irq;
+ }
/*
* This makes sure that our colour bitfield
@@ -1478,7 +1261,7 @@ static int __devinit sa1100fb_probe(struct platform_device *pdev)
ret = register_framebuffer(&fbi->fb);
if (ret < 0)
- goto err_free_irq;
+ goto err_reg_fb;
#ifdef CONFIG_CPU_FREQ
fbi->freq_transition.notifier_call = sa1100fb_freq_transition;
@@ -1490,12 +1273,17 @@ static int __devinit sa1100fb_probe(struct platform_device *pdev)
/* This driver cannot be unloaded at the moment */
return 0;
+ err_reg_fb:
+ if (machine_is_shannon())
+ gpio_free(SHANNON_GPIO_DISP_EN);
err_free_irq:
free_irq(irq, fbi);
failed:
+ if (fbi)
+ iounmap(fbi->base);
platform_set_drvdata(pdev, NULL);
kfree(fbi);
- release_mem_region(0xb0100000, 0x10000);
+ release_mem_region(res->start, resource_size(res));
return ret;
}
@@ -1505,6 +1293,7 @@ static struct platform_driver sa1100fb_driver = {
.resume = sa1100fb_resume,
.driver = {
.name = "sa11x0-fb",
+ .owner = THIS_MODULE,
},
};
diff --git a/drivers/video/sa1100fb.h b/drivers/video/sa1100fb.h
index 1c3b459865d..fc5d4292fad 100644
--- a/drivers/video/sa1100fb.h
+++ b/drivers/video/sa1100fb.h
@@ -10,44 +10,15 @@
* for more details.
*/
-/*
- * These are the bitfields for each
- * display depth that we support.
- */
-struct sa1100fb_rgb {
- struct fb_bitfield red;
- struct fb_bitfield green;
- struct fb_bitfield blue;
- struct fb_bitfield transp;
-};
-
-/*
- * This structure describes the machine which we are running on.
- */
-struct sa1100fb_mach_info {
- u_long pixclock;
-
- u_short xres;
- u_short yres;
-
- u_char bpp;
- u_char hsync_len;
- u_char left_margin;
- u_char right_margin;
-
- u_char vsync_len;
- u_char upper_margin;
- u_char lower_margin;
- u_char sync;
-
- u_int cmap_greyscale:1,
- cmap_inverse:1,
- cmap_static:1,
- unused:29;
-
- u_int lccr0;
- u_int lccr3;
-};
+#define LCCR0 0x0000 /* LCD Control Reg. 0 */
+#define LCSR 0x0004 /* LCD Status Reg. */
+#define DBAR1 0x0010 /* LCD DMA Base Address Reg. channel 1 */
+#define DCAR1 0x0014 /* LCD DMA Current Address Reg. channel 1 */
+#define DBAR2 0x0018 /* LCD DMA Base Address Reg. channel 2 */
+#define DCAR2 0x001C /* LCD DMA Current Address Reg. channel 2 */
+#define LCCR1 0x0020 /* LCD Control Reg. 1 */
+#define LCCR2 0x0024 /* LCD Control Reg. 2 */
+#define LCCR3 0x0028 /* LCD Control Reg. 3 */
/* Shadows for LCD controller registers */
struct sa1100fb_lcd_reg {
@@ -57,19 +28,11 @@ struct sa1100fb_lcd_reg {
unsigned long lccr3;
};
-#define RGB_4 (0)
-#define RGB_8 (1)
-#define RGB_16 (2)
-#define NR_RGB 3
-
struct sa1100fb_info {
struct fb_info fb;
struct device *dev;
- struct sa1100fb_rgb *rgb[NR_RGB];
-
- u_int max_bpp;
- u_int max_xres;
- u_int max_yres;
+ const struct sa1100fb_rgb *rgb[NR_RGB];
+ void __iomem *base;
/*
* These are the addresses we mapped
@@ -88,12 +51,6 @@ struct sa1100fb_info {
dma_addr_t dbar1;
dma_addr_t dbar2;
- u_int lccr0;
- u_int lccr3;
- u_int cmap_inverse:1,
- cmap_static:1,
- unused:30;
-
u_int reg_lccr0;
u_int reg_lccr1;
u_int reg_lccr2;
@@ -109,6 +66,8 @@ struct sa1100fb_info {
struct notifier_block freq_transition;
struct notifier_block freq_policy;
#endif
+
+ const struct sa1100fb_mach_info *inf;
};
#define TO_INF(ptr,member) container_of(ptr,struct sa1100fb_info,member)
@@ -130,15 +89,6 @@ struct sa1100fb_info {
#define SA1100_NAME "SA1100"
/*
- * Debug macros
- */
-#if DEBUG
-# define DPRINTK(fmt, args...) printk("%s: " fmt, __func__ , ## args)
-#else
-# define DPRINTK(fmt, args...)
-#endif
-
-/*
* Minimum X and Y resolutions
*/
#define MIN_XRES 64
diff --git a/include/linux/mfd/mcp.h b/include/linux/mfd/mcp.h
index f88c1cc0cb0..a9e8bd15767 100644
--- a/include/linux/mfd/mcp.h
+++ b/include/linux/mfd/mcp.h
@@ -10,8 +10,6 @@
#ifndef MCP_H
#define MCP_H
-#include <mach/dma.h>
-
struct mcp_ops;
struct mcp {
@@ -21,12 +19,7 @@ struct mcp {
int use_count;
unsigned int sclk_rate;
unsigned int rw_timeout;
- dma_device_t dma_audio_rd;
- dma_device_t dma_audio_wr;
- dma_device_t dma_telco_rd;
- dma_device_t dma_telco_wr;
struct device attached_device;
- int gpio_base;
};
struct mcp_ops {
@@ -47,15 +40,14 @@ void mcp_disable(struct mcp *);
#define mcp_get_sclk_rate(mcp) ((mcp)->sclk_rate)
struct mcp *mcp_host_alloc(struct device *, size_t);
-int mcp_host_register(struct mcp *);
-void mcp_host_unregister(struct mcp *);
+int mcp_host_add(struct mcp *, void *);
+void mcp_host_del(struct mcp *);
+void mcp_host_free(struct mcp *);
struct mcp_driver {
struct device_driver drv;
int (*probe)(struct mcp *);
void (*remove)(struct mcp *);
- int (*suspend)(struct mcp *, pm_message_t);
- int (*resume)(struct mcp *);
};
int mcp_driver_register(struct mcp_driver *);
diff --git a/include/linux/mfd/ucb1x00.h b/include/linux/mfd/ucb1x00.h
index 4321f044d1e..28af4175636 100644
--- a/include/linux/mfd/ucb1x00.h
+++ b/include/linux/mfd/ucb1x00.h
@@ -12,7 +12,7 @@
#include <linux/mfd/mcp.h>
#include <linux/gpio.h>
-#include <linux/semaphore.h>
+#include <linux/mutex.h>
#define UCB_IO_DATA 0x00
#define UCB_IO_DIR 0x01
@@ -104,17 +104,27 @@
#define UCB_MODE_DYN_VFLAG_ENA (1 << 12)
#define UCB_MODE_AUD_OFF_CAN (1 << 13)
+enum ucb1x00_reset {
+ UCB_RST_PROBE,
+ UCB_RST_RESUME,
+ UCB_RST_SUSPEND,
+ UCB_RST_REMOVE,
+ UCB_RST_PROBE_FAIL,
+};
-struct ucb1x00_irq {
- void *devid;
- void (*fn)(int, void *);
+struct ucb1x00_plat_data {
+ void (*reset)(enum ucb1x00_reset);
+ unsigned irq_base;
+ int gpio_base;
+ unsigned can_wakeup;
};
struct ucb1x00 {
- spinlock_t lock;
+ raw_spinlock_t irq_lock;
struct mcp *mcp;
unsigned int irq;
- struct semaphore adc_sem;
+ int irq_base;
+ struct mutex adc_mutex;
spinlock_t io_lock;
u16 id;
u16 io_dir;
@@ -122,7 +132,8 @@ struct ucb1x00 {
u16 adc_cr;
u16 irq_fal_enbl;
u16 irq_ris_enbl;
- struct ucb1x00_irq irq_handler[16];
+ u16 irq_mask;
+ u16 irq_wake;
struct device dev;
struct list_head node;
struct list_head devs;
@@ -144,7 +155,7 @@ struct ucb1x00_driver {
struct list_head devs;
int (*add)(struct ucb1x00_dev *dev);
void (*remove)(struct ucb1x00_dev *dev);
- int (*suspend)(struct ucb1x00_dev *dev, pm_message_t state);
+ int (*suspend)(struct ucb1x00_dev *dev);
int (*resume)(struct ucb1x00_dev *dev);
};
@@ -245,15 +256,4 @@ unsigned int ucb1x00_adc_read(struct ucb1x00 *ucb, int adc_channel, int sync);
void ucb1x00_adc_enable(struct ucb1x00 *ucb);
void ucb1x00_adc_disable(struct ucb1x00 *ucb);
-/*
- * Which edges of the IRQ do you want to control today?
- */
-#define UCB_RISING (1 << 0)
-#define UCB_FALLING (1 << 1)
-
-int ucb1x00_hook_irq(struct ucb1x00 *ucb, unsigned int idx, void (*fn)(int, void *), void *devid);
-void ucb1x00_enable_irq(struct ucb1x00 *ucb, unsigned int idx, int edges);
-void ucb1x00_disable_irq(struct ucb1x00 *ucb, unsigned int idx, int edges);
-int ucb1x00_free_irq(struct ucb1x00 *ucb, unsigned int idx, void *devid);
-
#endif
diff --git a/include/linux/sa11x0-dma.h b/include/linux/sa11x0-dma.h
new file mode 100644
index 00000000000..65839a58b8e
--- /dev/null
+++ b/include/linux/sa11x0-dma.h
@@ -0,0 +1,24 @@
+/*
+ * SA11x0 DMA Engine support
+ *
+ * Copyright (C) 2012 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __LINUX_SA11X0_DMA_H
+#define __LINUX_SA11X0_DMA_H
+
+struct dma_chan;
+
+#if defined(CONFIG_DMA_SA11X0) || defined(CONFIG_DMA_SA11X0_MODULE)
+bool sa11x0_dma_filter_fn(struct dma_chan *, void *);
+#else
+static inline bool sa11x0_dma_filter_fn(struct dma_chan *c, void *d)
+{
+ return false;
+}
+#endif
+
+#endif
diff --git a/include/video/sa1100fb.h b/include/video/sa1100fb.h
new file mode 100644
index 00000000000..4ab40965378
--- /dev/null
+++ b/include/video/sa1100fb.h
@@ -0,0 +1,63 @@
+/*
+ * StrongARM 1100 LCD Controller Frame Buffer Device
+ *
+ * Copyright (C) 1999 Eric A. Thomas
+ * Based on acornfb.c Copyright (C) Russell King.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file COPYING in the main directory of this archive
+ * for more details.
+ */
+#ifndef _VIDEO_SA1100FB_H
+#define _VIDEO_SA1100FB_H
+
+#include <linux/fb.h>
+#include <linux/types.h>
+
+#define RGB_4 0
+#define RGB_8 1
+#define RGB_16 2
+#define NR_RGB 3
+
+/* These are the bitfields for each display depth that we support. */
+struct sa1100fb_rgb {
+ struct fb_bitfield red;
+ struct fb_bitfield green;
+ struct fb_bitfield blue;
+ struct fb_bitfield transp;
+};
+
+/* This structure describes the machine which we are running on. */
+struct sa1100fb_mach_info {
+ u_long pixclock;
+
+ u_short xres;
+ u_short yres;
+
+ u_char bpp;
+ u_char hsync_len;
+ u_char left_margin;
+ u_char right_margin;
+
+ u_char vsync_len;
+ u_char upper_margin;
+ u_char lower_margin;
+ u_char sync;
+
+ u_int cmap_greyscale:1,
+ cmap_inverse:1,
+ cmap_static:1,
+ unused:29;
+
+ u_int lccr0;
+ u_int lccr3;
+
+ /* Overrides for the default RGB maps */
+ const struct sa1100fb_rgb *rgb[NR_RGB];
+
+ void (*backlight_power)(int);
+ void (*lcd_power)(int);
+ void (*set_visual)(u32);
+};
+
+#endif