summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--drivers/char/watchdog/Kconfig21
-rw-r--r--drivers/char/watchdog/Makefile1
-rw-r--r--drivers/char/watchdog/iTCO_wdt.c706
3 files changed, 728 insertions, 0 deletions
diff --git a/drivers/char/watchdog/Kconfig b/drivers/char/watchdog/Kconfig
index 06f3fa2fe87..89e46d6dfc4 100644
--- a/drivers/char/watchdog/Kconfig
+++ b/drivers/char/watchdog/Kconfig
@@ -316,6 +316,27 @@ config I8XX_TCO
To compile this driver as a module, choose M here: the
module will be called i8xx_tco.
+config ITCO_WDT
+ tristate "Intel TCO Timer/Watchdog (EXPERIMENTAL)"
+ depends on WATCHDOG && (X86 || IA64) && PCI && EXPERIMENTAL
+ ---help---
+ Hardware driver for the intel TCO timer based watchdog devices.
+ These drivers are included in the Intel 82801 I/O Controller
+ Hub family 'from ICH0 up to ICH7) and in the Intel 6300ESB
+ controller hub.
+
+ The TCO (Total Cost of Ownership) timer is a watchdog timer
+ that will reboot the machine after its second expiration. The
+ expiration time can be configured with the "heartbeat" parameter.
+
+ On some motherboards the driver may fail to reset the chipset's
+ NO_REBOOT flag which prevents the watchdog from rebooting the
+ machine. If this is the case you will get a kernel message like
+ "failed to reset NO_REBOOT flag, reboot disabled by hardware".
+
+ To compile this driver as a module, choose M here: the
+ module will be called iTCO_wdt.
+
config SC1200_WDT
tristate "National Semiconductor PC87307/PC97307 (ala SC1200) Watchdog"
depends on WATCHDOG && X86
diff --git a/drivers/char/watchdog/Makefile b/drivers/char/watchdog/Makefile
index 6ffca7cb56a..7f70abad465 100644
--- a/drivers/char/watchdog/Makefile
+++ b/drivers/char/watchdog/Makefile
@@ -47,6 +47,7 @@ obj-$(CONFIG_IBMASR) += ibmasr.o
obj-$(CONFIG_WAFER_WDT) += wafer5823wdt.o
obj-$(CONFIG_I6300ESB_WDT) += i6300esb.o
obj-$(CONFIG_I8XX_TCO) += i8xx_tco.o
+obj-$(CONFIG_ITCO_WDT) += iTCO_wdt.o
obj-$(CONFIG_SC1200_WDT) += sc1200wdt.o
obj-$(CONFIG_SCx200_WDT) += scx200_wdt.o
obj-$(CONFIG_60XX_WDT) += sbc60xxwdt.o
diff --git a/drivers/char/watchdog/iTCO_wdt.c b/drivers/char/watchdog/iTCO_wdt.c
new file mode 100644
index 00000000000..c1a5787fde5
--- /dev/null
+++ b/drivers/char/watchdog/iTCO_wdt.c
@@ -0,0 +1,706 @@
+/*
+ * intel TCO Watchdog Driver (Used in i82801 and i6300ESB chipsets)
+ *
+ * (c) Copyright 2006 Wim Van Sebroeck <wim@iguana.be>.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ * Neither Wim Van Sebroeck nor Iguana vzw. admit liability nor
+ * provide warranty for any of this software. This material is
+ * provided "AS-IS" and at no charge.
+ *
+ * The TCO watchdog is implemented in the following I/O controller hubs:
+ * (See the intel documentation on http://developer.intel.com.)
+ * 82801AA (ICH) : document number 290655-003, 290677-014,
+ * 82801AB (ICHO) : document number 290655-003, 290677-014,
+ * 82801BA (ICH2) : document number 290687-002, 298242-027,
+ * 82801BAM (ICH2-M) : document number 290687-002, 298242-027,
+ * 82801CA (ICH3-S) : document number 290733-003, 290739-013,
+ * 82801CAM (ICH3-M) : document number 290716-001, 290718-007,
+ * 82801DB (ICH4) : document number 290744-001, 290745-020,
+ * 82801DBM (ICH4-M) : document number 252337-001, 252663-005,
+ * 82801E (C-ICH) : document number 273599-001, 273645-002,
+ * 82801EB (ICH5) : document number 252516-001, 252517-003,
+ * 82801ER (ICH5R) : document number 252516-001, 252517-003,
+ * 82801FB (ICH6) : document number 301473-002, 301474-007,
+ * 82801FR (ICH6R) : document number 301473-002, 301474-007,
+ * 82801FBM (ICH6-M) : document number 301473-002, 301474-007,
+ * 82801FW (ICH6W) : document number 301473-001, 301474-007,
+ * 82801FRW (ICH6RW) : document number 301473-001, 301474-007,
+ * 82801GB (ICH7) : document number 307013-002, 307014-009,
+ * 82801GR (ICH7R) : document number 307013-002, 307014-009,
+ * 82801GDH (ICH7DH) : document number 307013-002, 307014-009,
+ * 82801GBM (ICH7-M) : document number 307013-002, 307014-009,
+ * 82801GHM (ICH7-M DH) : document number 307013-002, 307014-009,
+ * 6300ESB (6300ESB) : document number 300641-003
+ */
+
+/*
+ * Includes, defines, variables, module parameters, ...
+ */
+
+/* Module and version information */
+#define DRV_NAME "iTCO_wdt"
+#define DRV_VERSION "1.00"
+#define DRV_RELDATE "21-May-2006"
+#define PFX DRV_NAME ": "
+
+/* Includes */
+#include <linux/config.h> /* For CONFIG_WATCHDOG_NOWAYOUT/... */
+#include <linux/module.h> /* For module specific items */
+#include <linux/moduleparam.h> /* For new moduleparam's */
+#include <linux/types.h> /* For standard types (like size_t) */
+#include <linux/errno.h> /* For the -ENODEV/... values */
+#include <linux/kernel.h> /* For printk/panic/... */
+#include <linux/miscdevice.h> /* For MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR) */
+#include <linux/watchdog.h> /* For the watchdog specific items */
+#include <linux/notifier.h> /* For notifier support */
+#include <linux/reboot.h> /* For reboot_notifier stuff */
+#include <linux/init.h> /* For __init/__exit/... */
+#include <linux/fs.h> /* For file operations */
+#include <linux/pci.h> /* For pci functions */
+#include <linux/ioport.h> /* For io-port access */
+#include <linux/spinlock.h> /* For spin_lock/spin_unlock/... */
+
+#include <asm/uaccess.h> /* For copy_to_user/put_user/... */
+#include <asm/io.h> /* For inb/outb/... */
+
+/* TCO related info */
+enum iTCO_chipsets {
+ TCO_ICH = 0, /* ICH */
+ TCO_ICH0, /* ICH0 */
+ TCO_ICH2, /* ICH2 */
+ TCO_ICH2M, /* ICH2-M */
+ TCO_ICH3, /* ICH3-S */
+ TCO_ICH3M, /* ICH3-M */
+ TCO_ICH4, /* ICH4 */
+ TCO_ICH4M, /* ICH4-M */
+ TCO_CICH, /* C-ICH */
+ TCO_ICH5, /* ICH5 & ICH5R */
+ TCO_6300ESB, /* 6300ESB */
+ TCO_ICH6, /* ICH6 & ICH6R */
+ TCO_ICH6M, /* ICH6-M */
+ TCO_ICH6W, /* ICH6W & ICH6RW */
+ TCO_ICH7, /* ICH7 & ICH7R */
+ TCO_ICH7M, /* ICH7-M */
+ TCO_ICH7MDH, /* ICH7-M DH */
+};
+
+static struct {
+ char *name;
+ unsigned int iTCO_version;
+} iTCO_chipset_info[] __devinitdata = {
+ {"ICH", 1},
+ {"ICH0", 1},
+ {"ICH2", 1},
+ {"ICH2-M", 1},
+ {"ICH3-S", 1},
+ {"ICH3-M", 1},
+ {"ICH4", 1},
+ {"ICH4-M", 1},
+ {"C-ICH", 1},
+ {"ICH5 or ICH5R", 1},
+ {"6300ESB", 1},
+ {"ICH6 or ICH6R", 2},
+ {"ICH6-M", 2},
+ {"ICH6W or ICH6RW", 2},
+ {"ICH7 or ICH7R", 2},
+ {"ICH7-M", 2},
+ {"ICH7-M DH", 2},
+ {NULL,0}
+};
+
+/*
+ * This data only exists for exporting the supported PCI ids
+ * via MODULE_DEVICE_TABLE. We do not actually register a
+ * pci_driver, because the I/O Controller Hub has also other
+ * functions that probably will be registered by other drivers.
+ */
+static struct pci_device_id iTCO_wdt_pci_tbl[] = {
+ { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801AA_0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_ICH },
+ { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801AB_0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_ICH0 },
+ { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801BA_0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_ICH2 },
+ { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801BA_10, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_ICH2M },
+ { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_ICH3 },
+ { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_12, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_ICH3M },
+ { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_ICH4 },
+ { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_12, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_ICH4M },
+ { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801E_0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_CICH },
+ { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801EB_0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_ICH5 },
+ { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB_1, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_6300ESB },
+ { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_ICH6 },
+ { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_1, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_ICH6M },
+ { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_2, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_ICH6W },
+ { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_ICH7 },
+ { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_1, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_ICH7M },
+ { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_31, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_ICH7MDH },
+ { 0, }, /* End of list */
+};
+MODULE_DEVICE_TABLE (pci, iTCO_wdt_pci_tbl);
+
+/* Address definitions for the TCO */
+#define TCOBASE iTCO_wdt_private.ACPIBASE + 0x60 /* TCO base address */
+#define SMI_EN iTCO_wdt_private.ACPIBASE + 0x30 /* SMI Control and Enable Register */
+
+#define TCO_RLD TCOBASE + 0x00 /* TCO Timer Reload and Current Value */
+#define TCOv1_TMR TCOBASE + 0x01 /* TCOv1 Timer Initial Value */
+#define TCO_DAT_IN TCOBASE + 0x02 /* TCO Data In Register */
+#define TCO_DAT_OUT TCOBASE + 0x03 /* TCO Data Out Register */
+#define TCO1_STS TCOBASE + 0x04 /* TCO1 Status Register */
+#define TCO2_STS TCOBASE + 0x06 /* TCO2 Status Register */
+#define TCO1_CNT TCOBASE + 0x08 /* TCO1 Control Register */
+#define TCO2_CNT TCOBASE + 0x0a /* TCO2 Control Register */
+#define TCOv2_TMR TCOBASE + 0x12 /* TCOv2 Timer Initial Value */
+
+/* internal variables */
+static unsigned long is_active;
+static char expect_release;
+static struct { /* this is private data for the iTCO_wdt device */
+ unsigned int iTCO_version; /* TCO version/generation */
+ unsigned long ACPIBASE; /* The cards ACPIBASE address (TCOBASE = ACPIBASE+0x60) */
+ unsigned long __iomem *gcs; /* NO_REBOOT flag is Memory-Mapped GCS register bit 5 (TCO version 2) */
+ spinlock_t io_lock; /* the lock for io operations */
+ struct pci_dev *pdev; /* the PCI-device */
+} iTCO_wdt_private;
+
+/* module parameters */
+#define WATCHDOG_HEARTBEAT 30 /* 30 sec default heartbeat */
+static int heartbeat = WATCHDOG_HEARTBEAT; /* in seconds */
+module_param(heartbeat, int, 0);
+MODULE_PARM_DESC(heartbeat, "Watchdog heartbeat in seconds. (2<heartbeat<39 (TCO v1) or 613 (TCO v2), default=" __MODULE_STRING(WATCHDOG_HEARTBEAT) ")");
+
+static int nowayout = WATCHDOG_NOWAYOUT;
+module_param(nowayout, int, 0);
+MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=CONFIG_WATCHDOG_NOWAYOUT)");
+
+/*
+ * Some TCO specific functions
+ */
+
+static inline unsigned int seconds_to_ticks(int seconds)
+{
+ /* the internal timer is stored as ticks which decrement
+ * every 0.6 seconds */
+ return (seconds * 10) / 6;
+}
+
+static void iTCO_wdt_set_NO_REBOOT_bit(void)
+{
+ u32 val32;
+
+ /* Set the NO_REBOOT bit: this disables reboots */
+ if (iTCO_wdt_private.iTCO_version == 2) {
+ val32 = readl(iTCO_wdt_private.gcs);
+ val32 |= 0x00000020;
+ writel(val32, iTCO_wdt_private.gcs);
+ } else if (iTCO_wdt_private.iTCO_version == 1) {
+ pci_read_config_dword(iTCO_wdt_private.pdev, 0xd4, &val32);
+ val32 |= 0x00000002;
+ pci_write_config_dword(iTCO_wdt_private.pdev, 0xd4, val32);
+ }
+}
+
+static int iTCO_wdt_unset_NO_REBOOT_bit(void)
+{
+ int ret = 0;
+ u32 val32;
+
+ /* Unset the NO_REBOOT bit: this enables reboots */
+ if (iTCO_wdt_private.iTCO_version == 2) {
+ val32 = readl(iTCO_wdt_private.gcs);
+ val32 &= 0xffffffdf;
+ writel(val32, iTCO_wdt_private.gcs);
+
+ val32 = readl(iTCO_wdt_private.gcs);
+ if (val32 & 0x00000020)
+ ret = -EIO;
+ } else if (iTCO_wdt_private.iTCO_version == 1) {
+ pci_read_config_dword(iTCO_wdt_private.pdev, 0xd4, &val32);
+ val32 &= 0xfffffffd;
+ pci_write_config_dword(iTCO_wdt_private.pdev, 0xd4, val32);
+
+ pci_read_config_dword(iTCO_wdt_private.pdev, 0xd4, &val32);
+ if (val32 & 0x00000002)
+ ret = -EIO;
+ }
+
+ return ret; /* returns: 0 = OK, -EIO = Error */
+}
+
+static int iTCO_wdt_start(void)
+{
+ unsigned int val;
+
+ spin_lock(&iTCO_wdt_private.io_lock);
+
+ /* disable chipset's NO_REBOOT bit */
+ if (iTCO_wdt_unset_NO_REBOOT_bit()) {
+ printk(KERN_ERR PFX "failed to reset NO_REBOOT flag, reboot disabled by hardware\n");
+ return -EIO;
+ }
+
+ /* Bit 11: TCO Timer Halt -> 0 = The TCO timer is enabled to count */
+ val = inw(TCO1_CNT);
+ val &= 0xf7ff;
+ outw(val, TCO1_CNT);
+ val = inw(TCO1_CNT);
+ spin_unlock(&iTCO_wdt_private.io_lock);
+
+ if (val & 0x0800)
+ return -1;
+ return 0;
+}
+
+static int iTCO_wdt_stop(void)
+{
+ unsigned int val;
+
+ spin_lock(&iTCO_wdt_private.io_lock);
+
+ /* Bit 11: TCO Timer Halt -> 1 = The TCO timer is disabled */
+ val = inw(TCO1_CNT);
+ val |= 0x0800;
+ outw(val, TCO1_CNT);
+ val = inw(TCO1_CNT);
+
+ /* Set the NO_REBOOT bit to prevent later reboots, just for sure */
+ iTCO_wdt_set_NO_REBOOT_bit();
+
+ spin_unlock(&iTCO_wdt_private.io_lock);
+
+ if ((val & 0x0800) == 0)
+ return -1;
+ return 0;
+}
+
+static int iTCO_wdt_keepalive(void)
+{
+ spin_lock(&iTCO_wdt_private.io_lock);
+
+ /* Reload the timer by writing to the TCO Timer Counter register */
+ if (iTCO_wdt_private.iTCO_version == 2) {
+ outw(0x01, TCO_RLD);
+ } else if (iTCO_wdt_private.iTCO_version == 1) {
+ outb(0x01, TCO_RLD);
+ }
+
+ spin_unlock(&iTCO_wdt_private.io_lock);
+ return 0;
+}
+
+static int iTCO_wdt_set_heartbeat(int t)
+{
+ unsigned int val16;
+ unsigned char val8;
+ unsigned int tmrval;
+
+ tmrval = seconds_to_ticks(t);
+ /* from the specs: */
+ /* "Values of 0h-3h are ignored and should not be attempted" */
+ if (tmrval < 0x04)
+ return -EINVAL;
+ if (((iTCO_wdt_private.iTCO_version == 2) && (tmrval > 0x3ff)) ||
+ ((iTCO_wdt_private.iTCO_version == 1) && (tmrval > 0x03f)))
+ return -EINVAL;
+
+ /* Write new heartbeat to watchdog */
+ if (iTCO_wdt_private.iTCO_version == 2) {
+ spin_lock(&iTCO_wdt_private.io_lock);
+ val16 = inw(TCOv2_TMR);
+ val16 &= 0xfc00;
+ val16 |= tmrval;
+ outw(val16, TCOv2_TMR);
+ val16 = inw(TCOv2_TMR);
+ spin_unlock(&iTCO_wdt_private.io_lock);
+
+ if ((val16 & 0x3ff) != tmrval)
+ return -EINVAL;
+ } else if (iTCO_wdt_private.iTCO_version == 1) {
+ spin_lock(&iTCO_wdt_private.io_lock);
+ val8 = inb(TCOv1_TMR);
+ val8 &= 0xc0;
+ val8 |= (tmrval & 0xff);
+ outb(val8, TCOv1_TMR);
+ val8 = inb(TCOv1_TMR);
+ spin_unlock(&iTCO_wdt_private.io_lock);
+
+ if ((val8 & 0x3f) != tmrval)
+ return -EINVAL;
+ }
+
+ heartbeat = t;
+ return 0;
+}
+
+static int iTCO_wdt_get_timeleft (int *time_left)
+{
+ unsigned int val16;
+ unsigned char val8;
+
+ /* read the TCO Timer */
+ if (iTCO_wdt_private.iTCO_version == 2) {
+ spin_lock(&iTCO_wdt_private.io_lock);
+ val16 = inw(TCO_RLD);
+ val16 &= 0x3ff;
+ spin_unlock(&iTCO_wdt_private.io_lock);
+
+ *time_left = (val16 * 6) / 10;
+ } else if (iTCO_wdt_private.iTCO_version == 1) {
+ spin_lock(&iTCO_wdt_private.io_lock);
+ val8 = inb(TCO_RLD);
+ val8 &= 0x3f;
+ spin_unlock(&iTCO_wdt_private.io_lock);
+
+ *time_left = (val8 * 6) / 10;
+ }
+ return 0;
+}
+
+/*
+ * /dev/watchdog handling
+ */
+
+static int iTCO_wdt_open (struct inode *inode, struct file *file)
+{
+ /* /dev/watchdog can only be opened once */
+ if (test_and_set_bit(0, &is_active))
+ return -EBUSY;
+
+ /*
+ * Reload and activate timer
+ */
+ iTCO_wdt_keepalive();
+ iTCO_wdt_start();
+ return nonseekable_open(inode, file);
+}
+
+static int iTCO_wdt_release (struct inode *inode, struct file *file)
+{
+ /*
+ * Shut off the timer.
+ */
+ if (expect_release == 42) {
+ iTCO_wdt_stop();
+ } else {
+ printk(KERN_CRIT PFX "Unexpected close, not stopping watchdog!\n");
+ iTCO_wdt_keepalive();
+ }
+ clear_bit(0, &is_active);
+ expect_release = 0;
+ return 0;
+}
+
+static ssize_t iTCO_wdt_write (struct file *file, const char __user *data,
+ size_t len, loff_t * ppos)
+{
+ /* See if we got the magic character 'V' and reload the timer */
+ if (len) {
+ if (!nowayout) {
+ size_t i;
+
+ /* note: just in case someone wrote the magic character
+ * five months ago... */
+ expect_release = 0;
+
+ /* scan to see whether or not we got the magic character */
+ for (i = 0; i != len; i++) {
+ char c;
+ if (get_user(c, data+i))
+ return -EFAULT;
+ if (c == 'V')
+ expect_release = 42;
+ }
+ }
+
+ /* someone wrote to us, we should reload the timer */
+ iTCO_wdt_keepalive();
+ }
+ return len;
+}
+
+static int iTCO_wdt_ioctl (struct inode *inode, struct file *file,
+ unsigned int cmd, unsigned long arg)
+{
+ int new_options, retval = -EINVAL;
+ int new_heartbeat;
+ int time_left;
+ void __user *argp = (void __user *)arg;
+ int __user *p = argp;
+ static struct watchdog_info ident = {
+ .options = WDIOF_SETTIMEOUT |
+ WDIOF_KEEPALIVEPING |
+ WDIOF_MAGICCLOSE,
+ .firmware_version = 0,
+ .identity = DRV_NAME,
+ };
+
+ switch (cmd) {
+ case WDIOC_GETSUPPORT:
+ return copy_to_user(argp, &ident,
+ sizeof (ident)) ? -EFAULT : 0;
+
+ case WDIOC_GETSTATUS:
+ case WDIOC_GETBOOTSTATUS:
+ return put_user(0, p);
+
+ case WDIOC_KEEPALIVE:
+ iTCO_wdt_keepalive();
+ return 0;
+
+ case WDIOC_SETOPTIONS:
+ {
+ if (get_user(new_options, p))
+ return -EFAULT;
+
+ if (new_options & WDIOS_DISABLECARD) {
+ iTCO_wdt_stop();
+ retval = 0;
+ }
+
+ if (new_options & WDIOS_ENABLECARD) {
+ iTCO_wdt_keepalive();
+ iTCO_wdt_start();
+ retval = 0;
+ }
+
+ return retval;
+ }
+
+ case WDIOC_SETTIMEOUT:
+ {
+ if (get_user(new_heartbeat, p))
+ return -EFAULT;
+
+ if (iTCO_wdt_set_heartbeat(new_heartbeat))
+ return -EINVAL;
+
+ iTCO_wdt_keepalive();
+ /* Fall */
+ }
+
+ case WDIOC_GETTIMEOUT:
+ return put_user(heartbeat, p);
+
+ case WDIOC_GETTIMELEFT:
+ {
+ if (iTCO_wdt_get_timeleft(&time_left))
+ return -EINVAL;
+
+ return put_user(time_left, p);
+ }
+
+ default:
+ return -ENOIOCTLCMD;
+ }
+}
+
+/*
+ * Notify system
+ */
+
+static int iTCO_wdt_notify_sys (struct notifier_block *this, unsigned long code, void *unused)
+{
+ if (code==SYS_DOWN || code==SYS_HALT) {
+ /* Turn the WDT off */
+ iTCO_wdt_stop();
+ }
+
+ return NOTIFY_DONE;
+}
+
+/*
+ * Kernel Interfaces
+ */
+
+static struct file_operations iTCO_wdt_fops = {
+ .owner = THIS_MODULE,
+ .llseek = no_llseek,
+ .write = iTCO_wdt_write,
+ .ioctl = iTCO_wdt_ioctl,
+ .open = iTCO_wdt_open,
+ .release = iTCO_wdt_release,
+};
+
+static struct miscdevice iTCO_wdt_miscdev = {
+ .minor = WATCHDOG_MINOR,
+ .name = "watchdog",
+ .fops = &iTCO_wdt_fops,
+};
+
+static struct notifier_block iTCO_wdt_notifier = {
+ .notifier_call = iTCO_wdt_notify_sys,
+};
+
+/*
+ * Init & exit routines
+ */
+
+static int __init iTCO_wdt_init(struct pci_dev *pdev, const struct pci_device_id *ent)
+{
+ int ret;
+ u32 base_address;
+ unsigned long RCBA;
+ unsigned long val32;
+
+ /*
+ * Find the ACPI/PM base I/O address which is the base
+ * for the TCO registers (TCOBASE=ACPIBASE + 0x60)
+ * ACPIBASE is bits [15:7] from 0x40-0x43
+ */
+ pci_read_config_dword(pdev, 0x40, &base_address);
+ base_address &= 0x00007f80;
+ if (base_address == 0x00000000) {
+ /* Something's wrong here, ACPIBASE has to be set */
+ printk(KERN_ERR PFX "failed to get TCOBASE address\n");
+ return -ENODEV;
+ }
+ iTCO_wdt_private.iTCO_version = iTCO_chipset_info[ent->driver_data].iTCO_version;
+ iTCO_wdt_private.ACPIBASE = base_address;
+ iTCO_wdt_private.pdev = pdev;
+
+ /* Get the Memory-Mapped GCS register, we need it for the NO_REBOOT flag (TCO v2) */
+ /* To get access to it you have to read RCBA from PCI Config space 0xf0
+ and use it as base. GCS = RCBA + ICH6_GCS(0x3410). */
+ if (iTCO_wdt_private.iTCO_version == 2) {
+ pci_read_config_dword(pdev, 0xf0, &base_address);
+ RCBA = base_address & 0xffffc000;
+ iTCO_wdt_private.gcs = ioremap((RCBA + 0x3410),4);
+ }
+
+ /* Check chipset's NO_REBOOT bit */
+ if (iTCO_wdt_unset_NO_REBOOT_bit()) {
+ printk(KERN_ERR PFX "failed to reset NO_REBOOT flag, reboot disabled by hardware\n");
+ ret = -ENODEV; /* Cannot reset NO_REBOOT bit */
+ goto out;
+ }
+
+ /* Set the NO_REBOOT bit to prevent later reboots, just for sure */
+ iTCO_wdt_set_NO_REBOOT_bit();
+
+ /* Set the TCO_EN bit in SMI_EN register */
+ if (!request_region(SMI_EN, 4, "iTCO_wdt")) {
+ printk(KERN_ERR PFX "I/O address 0x%04lx already in use\n",
+ SMI_EN );
+ ret = -EIO;
+ goto out;
+ }
+ val32 = inl(SMI_EN);
+ val32 &= 0xffffdfff; /* Turn off SMI clearing watchdog */
+ outl(val32, SMI_EN);
+ release_region(SMI_EN, 4);
+
+ /* The TCO I/O registers reside in a 32-byte range pointed to by the TCOBASE value */
+ if (!request_region (TCOBASE, 0x20, "iTCO_wdt")) {
+ printk (KERN_ERR PFX "I/O address 0x%04lx already in use\n",
+ TCOBASE);
+ ret = -EIO;
+ goto out;
+ }
+
+ printk(KERN_INFO PFX "Found a %s TCO device (Version=%d, TCOBASE=0x%04lx)\n",
+ iTCO_chipset_info[ent->driver_data].name,
+ iTCO_chipset_info[ent->driver_data].iTCO_version,
+ TCOBASE);
+
+ /* Clear out the (probably old) status */
+ outb(0, TCO1_STS);
+ outb(3, TCO2_STS);
+
+ /* Make sure the watchdog is not running */
+ iTCO_wdt_stop();
+
+ /* Check that the heartbeat value is within it's range ; if not reset to the default */
+ if (iTCO_wdt_set_heartbeat(heartbeat)) {
+ iTCO_wdt_set_heartbeat(WATCHDOG_HEARTBEAT);
+ printk(KERN_INFO PFX "heartbeat value must be 2<heartbeat<39 (TCO v1) or 613 (TCO v2), using %d\n",
+ heartbeat);
+ }
+
+ ret = register_reboot_notifier(&iTCO_wdt_notifier);
+ if (ret != 0) {
+ printk(KERN_ERR PFX "cannot register reboot notifier (err=%d)\n",
+ ret);
+ goto unreg_region;
+ }
+
+ ret = misc_register(&iTCO_wdt_miscdev);
+ if (ret != 0) {
+ printk(KERN_ERR PFX "cannot register miscdev on minor=%d (err=%d)\n",
+ WATCHDOG_MINOR, ret);
+ goto unreg_notifier;
+ }
+
+ printk (KERN_INFO PFX "initialized. heartbeat=%d sec (nowayout=%d)\n",
+ heartbeat, nowayout);
+
+ return 0;
+
+unreg_notifier:
+ unregister_reboot_notifier(&iTCO_wdt_notifier);
+unreg_region:
+ release_region (TCOBASE, 0x20);
+out:
+ if (iTCO_wdt_private.iTCO_version == 2)
+ iounmap(iTCO_wdt_private.gcs);
+ iTCO_wdt_private.ACPIBASE = 0;
+ return ret;
+}
+
+static void __exit iTCO_wdt_cleanup(void)
+{
+ /* Stop the timer before we leave */
+ if (!nowayout)
+ iTCO_wdt_stop();
+
+ /* Deregister */
+ misc_deregister(&iTCO_wdt_miscdev);
+ unregister_reboot_notifier(&iTCO_wdt_notifier);
+ release_region(TCOBASE, 0x20);
+ if (iTCO_wdt_private.iTCO_version == 2)
+ iounmap(iTCO_wdt_private.gcs);
+}
+
+static int __init iTCO_wdt_init_module(void)
+{
+ int found = 0;
+ struct pci_dev *pdev = NULL;
+ const struct pci_device_id *ent;
+
+ spin_lock_init(&iTCO_wdt_private.io_lock);
+
+ for_each_pci_dev(pdev) {
+ ent = pci_match_id(iTCO_wdt_pci_tbl, pdev);
+ if (ent) {
+ if (!(iTCO_wdt_init(pdev, ent))) {
+ found++;
+ break;
+ }
+ }
+ }
+
+ if (!found) {
+ printk(KERN_INFO PFX "No card detected\n");
+ return -ENODEV;
+ }
+
+ return 0;
+}
+
+static void __exit iTCO_wdt_cleanup_module(void)
+{
+ if (iTCO_wdt_private.ACPIBASE)
+ iTCO_wdt_cleanup();
+
+ printk(KERN_INFO PFX "Watchdog Module Unloaded.\n");
+}
+
+module_init(iTCO_wdt_init_module);
+module_exit(iTCO_wdt_cleanup_module);
+
+MODULE_AUTHOR("Wim Van Sebroeck <wim@iguana.be>");
+MODULE_DESCRIPTION("Intel TCO WatchDog Timer Driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);