summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--arch/blackfin/Kconfig2
-rw-r--r--drivers/block/Kconfig2
-rw-r--r--drivers/char/Kconfig2
-rw-r--r--drivers/connector/Kconfig2
-rw-r--r--drivers/crypto/Kconfig6
-rw-r--r--drivers/ide/Kconfig2
-rw-r--r--drivers/media/dvb/dvb-usb/Kconfig2
-rw-r--r--drivers/mtd/devices/Kconfig2
-rw-r--r--drivers/mtd/nand/Kconfig4
-rw-r--r--drivers/net/Kconfig4
-rw-r--r--drivers/net/wireless/Kconfig2
-rw-r--r--drivers/net/wireless/hostap/Kconfig8
-rw-r--r--drivers/net/wireless/iwlwifi/Kconfig4
-rw-r--r--drivers/net/wireless/rt2x00/Kconfig14
-rw-r--r--drivers/s390/net/Kconfig14
-rw-r--r--drivers/serial/Kconfig2
-rw-r--r--drivers/w1/Kconfig2
-rw-r--r--drivers/w1/masters/Kconfig6
-rw-r--r--drivers/watchdog/Kconfig2
-rw-r--r--net/ipv6/Kconfig2
-rw-r--r--net/netfilter/Kconfig4
21 files changed, 44 insertions, 44 deletions
diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig
index 3640cdc38aa..bc9ce89f620 100644
--- a/arch/blackfin/Kconfig
+++ b/arch/blackfin/Kconfig
@@ -872,7 +872,7 @@ config BFIN_GPTIMERS
are unsure, say N.
To compile this driver as a module, choose M here: the module
- will be called gptimers.ko.
+ will be called gptimers.
choice
prompt "Uncached DMA region"
diff --git a/drivers/block/Kconfig b/drivers/block/Kconfig
index f42fa50d355..1b98cc52c22 100644
--- a/drivers/block/Kconfig
+++ b/drivers/block/Kconfig
@@ -112,7 +112,7 @@ config GDROM
with up to 1 GB of data. This drive will also read standard CD ROM
disks. Select this option to access any disks in your GD ROM drive.
Most users will want to say "Y" here.
- You can also build this as a module which will be called gdrom.ko
+ You can also build this as a module which will be called gdrom.
source "drivers/block/paride/Kconfig"
diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig
index 02ecfd5fa61..067e9dcb95c 100644
--- a/drivers/char/Kconfig
+++ b/drivers/char/Kconfig
@@ -692,7 +692,7 @@ config HVCS
this driver.
To compile this driver as a module, choose M here: the
- module will be called hvcs.ko. Additionally, this module
+ module will be called hvcs. Additionally, this module
will depend on arch specific APIs exported from hvcserver.ko
which will also be compiled when this driver is built as a
module.
diff --git a/drivers/connector/Kconfig b/drivers/connector/Kconfig
index 100bfd42206..6e6730f9dfd 100644
--- a/drivers/connector/Kconfig
+++ b/drivers/connector/Kconfig
@@ -7,7 +7,7 @@ menuconfig CONNECTOR
of the netlink socket protocol.
Connector support can also be built as a module. If so, the module
- will be called cn.ko.
+ will be called cn.
if CONNECTOR
diff --git a/drivers/crypto/Kconfig b/drivers/crypto/Kconfig
index 01afd758072..3e72a6a96d7 100644
--- a/drivers/crypto/Kconfig
+++ b/drivers/crypto/Kconfig
@@ -34,7 +34,7 @@ config CRYPTO_DEV_PADLOCK_AES
Available in VIA C3 and newer CPUs.
If unsure say M. The compiled module will be
- called padlock-aes.ko
+ called padlock-aes.
config CRYPTO_DEV_PADLOCK_SHA
tristate "PadLock driver for SHA1 and SHA256 algorithms"
@@ -47,7 +47,7 @@ config CRYPTO_DEV_PADLOCK_SHA
Available in VIA C7 and newer processors.
If unsure say M. The compiled module will be
- called padlock-sha.ko
+ called padlock-sha.
config CRYPTO_DEV_GEODE
tristate "Support for the Geode LX AES engine"
@@ -79,7 +79,7 @@ config ZCRYPT_MONOLITHIC
bool "Monolithic zcrypt module"
depends on ZCRYPT="m"
help
- Select this option if you want to have a single module z90crypt.ko
+ Select this option if you want to have a single module z90crypt,
that contains all parts of the crypto device driver (ap bus,
request router and all the card drivers).
diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig
index cf06494bb74..9a5d0aaac9d 100644
--- a/drivers/ide/Kconfig
+++ b/drivers/ide/Kconfig
@@ -46,7 +46,7 @@ menuconfig IDE
SMART parameters from disk drives.
To compile this driver as a module, choose M here: the
- module will be called ide-core.ko.
+ module will be called ide-core.
For further information, please read <file:Documentation/ide/ide.txt>.
diff --git a/drivers/media/dvb/dvb-usb/Kconfig b/drivers/media/dvb/dvb-usb/Kconfig
index 60955a70d88..1bb66e1ed5a 100644
--- a/drivers/media/dvb/dvb-usb/Kconfig
+++ b/drivers/media/dvb/dvb-usb/Kconfig
@@ -216,7 +216,7 @@ config DVB_USB_TTUSB2
help
Say Y here to support the Pinnacle 400e DVB-S USB2.0 receiver. The
firmware protocol used by this module is similar to the one used by the
- old ttusb-driver - that's why the module is called dvb-usb-ttusb2.ko.
+ old ttusb-driver - that's why the module is called dvb-usb-ttusb2.
config DVB_USB_DTT200U
tristate "WideView WT-200U and WT-220U (pen) DVB-T USB2.0 support (Yakumo/Hama/Typhoon/Yuan)"
diff --git a/drivers/mtd/devices/Kconfig b/drivers/mtd/devices/Kconfig
index 6fde0a2e356..325fab92a62 100644
--- a/drivers/mtd/devices/Kconfig
+++ b/drivers/mtd/devices/Kconfig
@@ -49,7 +49,7 @@ config MTD_MS02NV
If you want to compile this driver as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/kbuild/modules.txt>.
- The module will be called ms02-nv.ko.
+ The module will be called ms02-nv.
config MTD_DATAFLASH
tristate "Support for AT45xxx DataFlash"
diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index 890936d0275..f3276897859 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -260,7 +260,7 @@ config MTD_NAND_BASLER_EXCITE
help
This enables the driver for the NAND flash device found on the
Basler eXcite Smart Camera. If built as a module, the driver
- will be named "excite_nandflash.ko".
+ will be named excite_nandflash.
config MTD_NAND_CAFE
tristate "NAND support for OLPC CAFÉ chip"
@@ -282,7 +282,7 @@ config MTD_NAND_CS553X
controller is enabled for NAND, and currently requires that
the controller be in MMIO mode.
- If you say "m", the module will be called "cs553x_nand.ko".
+ If you say "m", the module will be called cs553x_nand.
config MTD_NAND_ATMEL
tristate "Support for NAND Flash / SmartMedia on AT91 and AVR32"
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 214a92d1ef7..b4683ce5564 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -1880,7 +1880,7 @@ config FEC_MPC52xx
---help---
This option enables support for the MPC5200's on-chip
Fast Ethernet Controller
- If compiled as module, it will be called 'fec_mpc52xx.ko'.
+ If compiled as module, it will be called fec_mpc52xx.
config FEC_MPC52xx_MDIO
bool "MPC52xx FEC MDIO bus driver"
@@ -1892,7 +1892,7 @@ config FEC_MPC52xx_MDIO
(Motorola? industry standard).
If your board uses an external PHY connected to FEC, enable this.
If not sure, enable.
- If compiled as module, it will be called 'fec_mpc52xx_phy.ko'.
+ If compiled as module, it will be called fec_mpc52xx_phy.
config NE_H8300
tristate "NE2000 compatible support for H8/300"
diff --git a/drivers/net/wireless/Kconfig b/drivers/net/wireless/Kconfig
index 3d94e7dfea6..3359497012a 100644
--- a/drivers/net/wireless/Kconfig
+++ b/drivers/net/wireless/Kconfig
@@ -310,7 +310,7 @@ config PRISM54
If you want to compile the driver as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/kbuild/modules.txt>.
- The module will be called prism54.ko.
+ The module will be called prism54.
config USB_ZD1201
tristate "USB ZD1201 based Wireless device support"
diff --git a/drivers/net/wireless/hostap/Kconfig b/drivers/net/wireless/hostap/Kconfig
index 932d207bce2..c15db229351 100644
--- a/drivers/net/wireless/hostap/Kconfig
+++ b/drivers/net/wireless/hostap/Kconfig
@@ -29,7 +29,7 @@ config HOSTAP
PLX/PCI/CS version of the driver to actually use the driver.
The driver can be compiled as a module and it will be called
- "hostap.ko".
+ hostap.
config HOSTAP_FIRMWARE
bool "Support downloading firmware images with Host AP driver"
@@ -68,7 +68,7 @@ config HOSTAP_PLX
driver.
The driver can be compiled as a module and will be named
- "hostap_plx.ko".
+ hostap_plx.
config HOSTAP_PCI
tristate "Host AP driver for Prism2.5 PCI adaptors"
@@ -81,7 +81,7 @@ config HOSTAP_PCI
driver.
The driver can be compiled as a module and will be named
- "hostap_pci.ko".
+ hostap_pci.
config HOSTAP_CS
tristate "Host AP driver for Prism2/2.5/3 PC Cards"
@@ -94,4 +94,4 @@ config HOSTAP_CS
driver.
The driver can be compiled as a module and will be named
- "hostap_cs.ko".
+ hostap_cs.
diff --git a/drivers/net/wireless/iwlwifi/Kconfig b/drivers/net/wireless/iwlwifi/Kconfig
index 8304f6406a1..736162324ba 100644
--- a/drivers/net/wireless/iwlwifi/Kconfig
+++ b/drivers/net/wireless/iwlwifi/Kconfig
@@ -75,7 +75,7 @@ config IWLAGN
If you want to compile the driver as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/kbuild/modules.txt>. The
- module will be called iwlagn.ko.
+ module will be called iwlagn.
config IWL4965
@@ -113,7 +113,7 @@ config IWL3945
If you want to compile the driver as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/kbuild/modules.txt>. The
- module will be called iwl3945.ko.
+ module will be called iwl3945.
config IWL3945_SPECTRUM_MEASUREMENT
bool "Enable Spectrum Measurement in iwl3945 driver"
diff --git a/drivers/net/wireless/rt2x00/Kconfig b/drivers/net/wireless/rt2x00/Kconfig
index bfc5d9cf716..1ae11c7f17a 100644
--- a/drivers/net/wireless/rt2x00/Kconfig
+++ b/drivers/net/wireless/rt2x00/Kconfig
@@ -9,11 +9,11 @@ menuconfig RT2X00
When building one of the individual drivers, the rt2x00 library
will also be created. That library (when the driver is built as
- a module) will be called "rt2x00lib.ko".
+ a module) will be called rt2x00lib.
Additionally PCI and USB libraries will also be build depending
on the types of drivers being selected, these libraries will be
- called "rt2x00pci.ko" and "rt2x00usb.ko".
+ called rt2x00pci and rt2x00usb.
if RT2X00
@@ -26,7 +26,7 @@ config RT2400PCI
This adds support for rt2400 wireless chipset family.
Supported chips: RT2460.
- When compiled as a module, this driver will be called "rt2400pci.ko".
+ When compiled as a module, this driver will be called rt2400pci.
config RT2500PCI
tristate "Ralink rt2500 (PCI/PCMCIA) support"
@@ -37,7 +37,7 @@ config RT2500PCI
This adds support for rt2500 wireless chipset family.
Supported chips: RT2560.
- When compiled as a module, this driver will be called "rt2500pci.ko".
+ When compiled as a module, this driver will be called rt2500pci.
config RT61PCI
tristate "Ralink rt2501/rt61 (PCI/PCMCIA) support"
@@ -51,7 +51,7 @@ config RT61PCI
This adds support for rt2501 wireless chipset family.
Supported chips: RT2561, RT2561S & RT2661.
- When compiled as a module, this driver will be called "rt61pci.ko".
+ When compiled as a module, this driver will be called rt61pci.
config RT2500USB
tristate "Ralink rt2500 (USB) support"
@@ -62,7 +62,7 @@ config RT2500USB
This adds support for rt2500 wireless chipset family.
Supported chips: RT2571 & RT2572.
- When compiled as a module, this driver will be called "rt2500usb.ko".
+ When compiled as a module, this driver will be called rt2500usb.
config RT73USB
tristate "Ralink rt2501/rt73 (USB) support"
@@ -75,7 +75,7 @@ config RT73USB
This adds support for rt2501 wireless chipset family.
Supported chips: RT2571W, RT2573 & RT2671.
- When compiled as a module, this driver will be called "rt73usb.ko".
+ When compiled as a module, this driver will be called rt73usb.
config RT2X00_LIB_PCI
tristate
diff --git a/drivers/s390/net/Kconfig b/drivers/s390/net/Kconfig
index a7745c82b4a..cb909a5b504 100644
--- a/drivers/s390/net/Kconfig
+++ b/drivers/s390/net/Kconfig
@@ -8,7 +8,7 @@ config LCS
Select this option if you want to use LCS networking on IBM System z.
This device driver supports Token Ring (IEEE 802.5),
FDDI (IEEE 802.7) and Ethernet.
- To compile as a module, choose M. The module name is lcs.ko.
+ To compile as a module, choose M. The module name is lcs.
If you do not know what it is, it's safe to choose Y.
config CTCM
@@ -21,7 +21,7 @@ config CTCM
It also supports virtual CTCs when running under VM.
This driver also supports channel-to-channel MPC SNA devices.
MPC is an SNA protocol device used by Communication Server for Linux.
- To compile as a module, choose M. The module name is ctcm.ko.
+ To compile as a module, choose M. The module name is ctcm.
To compile into the kernel, choose Y.
If you do not need any channel-to-channel connection, choose N.
@@ -34,7 +34,7 @@ config NETIUCV
link between VM guests. Using ifconfig a point-to-point connection
can be established to the Linux on IBM System z
running on the other VM guest. To compile as a module, choose M.
- The module name is netiucv.ko. If unsure, choose Y.
+ The module name is netiucv. If unsure, choose Y.
config SMSGIUCV
tristate "IUCV special message support (VM only)"
@@ -50,7 +50,7 @@ config CLAW
This driver supports channel attached CLAW devices.
CLAW is Common Link Access for Workstation. Common devices
that use CLAW are RS/6000s, Cisco Routers (CIP) and 3172 devices.
- To compile as a module, choose M. The module name is claw.ko.
+ To compile as a module, choose M. The module name is claw.
To compile into the kernel, choose Y.
config QETH
@@ -65,14 +65,14 @@ config QETH
<http://www.ibm.com/developerworks/linux/linux390>
To compile this driver as a module, choose M.
- The module name is qeth.ko.
+ The module name is qeth.
config QETH_L2
tristate "qeth layer 2 device support"
depends on QETH
help
Select this option to be able to run qeth devices in layer 2 mode.
- To compile as a module, choose M. The module name is qeth_l2.ko.
+ To compile as a module, choose M. The module name is qeth_l2.
If unsure, choose y.
config QETH_L3
@@ -80,7 +80,7 @@ config QETH_L3
depends on QETH
help
Select this option to be able to run qeth devices in layer 3 mode.
- To compile as a module choose M. The module name is qeth_l3.ko.
+ To compile as a module choose M. The module name is qeth_l3.
If unsure, choose Y.
config QETH_IPV6
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index 641e800ed69..1132c5cae7a 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -861,7 +861,7 @@ config SERIAL_UARTLITE
Say Y here if you want to use the Xilinx uartlite serial controller.
To compile this driver as a module, choose M here: the
- module will be called uartlite.ko.
+ module will be called uartlite.
config SERIAL_UARTLITE_CONSOLE
bool "Support for console on Xilinx uartlite serial port"
diff --git a/drivers/w1/Kconfig b/drivers/w1/Kconfig
index 9adbb4f9047..fd2c7bd9dfb 100644
--- a/drivers/w1/Kconfig
+++ b/drivers/w1/Kconfig
@@ -8,7 +8,7 @@ menuconfig W1
If you want W1 support, you should say Y here.
This W1 support can also be built as a module. If so, the module
- will be called wire.ko.
+ will be called wire.
if W1
diff --git a/drivers/w1/masters/Kconfig b/drivers/w1/masters/Kconfig
index 96d2f8e4c27..3195fb8b7d9 100644
--- a/drivers/w1/masters/Kconfig
+++ b/drivers/w1/masters/Kconfig
@@ -12,7 +12,7 @@ config W1_MASTER_MATROX
using Matrox's G400 GPIO pins.
This support is also available as a module. If so, the module
- will be called matrox_w1.ko.
+ will be called matrox_w1.
config W1_MASTER_DS2490
tristate "DS2490 USB <-> W1 transport layer for 1-wire"
@@ -22,7 +22,7 @@ config W1_MASTER_DS2490
for example DS9490*.
This support is also available as a module. If so, the module
- will be called ds2490.ko.
+ will be called ds2490.
config W1_MASTER_DS2482
tristate "Maxim DS2482 I2C to 1-Wire bridge"
@@ -56,7 +56,7 @@ config W1_MASTER_GPIO
GPIO pins. This driver uses the GPIO API to control the wire.
This support is also available as a module. If so, the module
- will be called w1-gpio.ko.
+ will be called w1-gpio.
config HDQ_MASTER_OMAP
tristate "OMAP HDQ driver"
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index 5eb8f21da82..452082f8794 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -531,7 +531,7 @@ config SBC8360_WDT
Board Computer produced by Axiomtek Co., Ltd. (www.axiomtek.com).
To compile this driver as a module, choose M here: the
- module will be called sbc8360.ko.
+ module will be called sbc8360.
Most people will say N.
diff --git a/net/ipv6/Kconfig b/net/ipv6/Kconfig
index ca8cb326d1d..ead6c7a42f4 100644
--- a/net/ipv6/Kconfig
+++ b/net/ipv6/Kconfig
@@ -168,7 +168,7 @@ config IPV6_SIT
into IPv4 packets. This is useful if you want to connect two IPv6
networks over an IPv4-only path.
- Saying M here will produce a module called sit.ko. If unsure, say Y.
+ Saying M here will produce a module called sit. If unsure, say Y.
config IPV6_NDISC_NODETYPE
bool
diff --git a/net/netfilter/Kconfig b/net/netfilter/Kconfig
index cb3ad741ebf..c26a20c58dd 100644
--- a/net/netfilter/Kconfig
+++ b/net/netfilter/Kconfig
@@ -327,7 +327,7 @@ config NETFILTER_XT_TARGET_CONNMARK
If you want to compile it as a module, say M here and read
<file:Documentation/kbuild/modules.txt>. The module will be called
- ipt_CONNMARK.ko. If unsure, say `N'.
+ ipt_CONNMARK. If unsure, say `N'.
config NETFILTER_XT_TARGET_CONNSECMARK
tristate '"CONNSECMARK" target support'
@@ -584,7 +584,7 @@ config NETFILTER_XT_MATCH_CONNMARK
If you want to compile it as a module, say M here and read
<file:Documentation/kbuild/modules.txt>. The module will be called
- ipt_connmark.ko. If unsure, say `N'.
+ ipt_connmark. If unsure, say `N'.
config NETFILTER_XT_MATCH_CONNTRACK
tristate '"conntrack" connection tracking match support'
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-07 05:20:46 +0000