diff options
-rw-r--r-- | arch/parisc/kernel/firmware.c | 22 | ||||
-rw-r--r-- | arch/parisc/kernel/pdc_chassis.c | 73 | ||||
-rw-r--r-- | drivers/parisc/Kconfig | 33 | ||||
-rw-r--r-- | include/asm-parisc/pdc.h | 1 |
4 files changed, 107 insertions, 22 deletions
diff --git a/arch/parisc/kernel/firmware.c b/arch/parisc/kernel/firmware.c index 2dc06b8e181..0596f27340c 100644 --- a/arch/parisc/kernel/firmware.c +++ b/arch/parisc/kernel/firmware.c @@ -11,7 +11,7 @@ * Copyright 1999 The Puffin Group, (Alex deVries, David Kennedy) * Copyright 2003 Grant Grundler <grundler parisc-linux org> * Copyright 2003,2004 Ryan Bradetich <rbrad@parisc-linux.org> - * Copyright 2004 Thibaut VARENE <varenet@parisc-linux.org> + * Copyright 2004,2006 Thibaut VARENE <varenet@parisc-linux.org> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -252,10 +252,8 @@ int pdc_pat_chassis_send_log(unsigned long state, unsigned long data) #endif /** - * pdc_chassis_disp - Updates display + * pdc_chassis_disp - Updates chassis code * @retval: -1 on error, 0 on success - * - * Works on old PDC only (E class, others?) */ int pdc_chassis_disp(unsigned long disp) { @@ -269,6 +267,22 @@ int pdc_chassis_disp(unsigned long disp) } /** + * pdc_chassis_warn - Fetches chassis warnings + * @retval: -1 on error, 0 on success + */ +int pdc_chassis_warn(unsigned long *warn) +{ + int retval = 0; + + spin_lock_irq(&pdc_lock); + retval = mem_pdc_call(PDC_CHASSIS, PDC_CHASSIS_WARN, __pa(pdc_result)); + *warn = pdc_result[0]; + spin_unlock_irq(&pdc_lock); + + return retval; +} + +/** * pdc_coproc_cfg - To identify coprocessors attached to the processor. * @pdc_coproc_info: Return buffer address. * diff --git a/arch/parisc/kernel/pdc_chassis.c b/arch/parisc/kernel/pdc_chassis.c index a45e2e2ffd9..51e86c0365c 100644 --- a/arch/parisc/kernel/pdc_chassis.c +++ b/arch/parisc/kernel/pdc_chassis.c @@ -1,8 +1,8 @@ /* - * interfaces to log Chassis Codes via PDC (firmware) + * interfaces to Chassis Codes via PDC (firmware) * * Copyright (C) 2002 Laurent Canet <canetl@esiee.fr> - * Copyright (C) 2002-2004 Thibaut VARENE <varenet@parisc-linux.org> + * Copyright (C) 2002-2006 Thibaut VARENE <varenet@parisc-linux.org> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License, version 2, as @@ -16,6 +16,9 @@ * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * TODO: poll chassis warns, trigger (configurable) machine shutdown when + * needed. */ #undef PDC_CHASSIS_DEBUG @@ -30,6 +33,7 @@ #include <linux/reboot.h> #include <linux/notifier.h> #include <linux/cache.h> +#include <linux/proc_fs.h> #include <asm/pdc_chassis.h> #include <asm/processor.h> @@ -38,7 +42,6 @@ #ifdef CONFIG_PDC_CHASSIS -static int pdc_chassis_old __read_mostly = 0; static unsigned int pdc_chassis_enabled __read_mostly = 1; @@ -64,7 +67,7 @@ __setup("pdcchassis=", pdc_chassis_setup); * Currently, only E class and A180 are known to work with this. * Inspired by Christoph Plattner */ - +#if 0 static void __init pdc_chassis_checkold(void) { switch(CPU_HVERSION) { @@ -73,7 +76,6 @@ static void __init pdc_chassis_checkold(void) case 0x482: /* E45 */ case 0x483: /* E55 */ case 0x516: /* A180 */ - pdc_chassis_old = 1; break; default: @@ -81,7 +83,7 @@ static void __init pdc_chassis_checkold(void) } DPRINTK(KERN_DEBUG "%s: pdc_chassis_checkold(); pdc_chassis_old = %d\n", __FILE__, pdc_chassis_old); } - +#endif /** * pdc_chassis_panic_event() - Called by the panic handler. @@ -136,14 +138,13 @@ void __init parisc_pdc_chassis_init(void) DPRINTK(KERN_DEBUG "%s: parisc_pdc_chassis_init()\n", __FILE__); /* Let see if we have something to handle... */ - /* Check for PDC_PAT or old LED Panel */ - pdc_chassis_checkold(); + /* Check for PDC_PAT */ if (is_pdc_pat()) { printk(KERN_INFO "Enabling PDC_PAT chassis codes support.\n"); handle = 1; } - else if (unlikely(pdc_chassis_old)) { - printk(KERN_INFO "Enabling old style chassis LED panel support.\n"); + else { + printk(KERN_INFO "Enabling regular chassis codes support.\n"); handle = 1; } @@ -215,9 +216,12 @@ int pdc_chassis_send_status(int message) } } else retval = -1; #else - if (unlikely(pdc_chassis_old)) { + if (1) { switch (message) { case PDC_CHASSIS_DIRECT_BSTART: + retval = pdc_chassis_disp(PDC_CHASSIS_DISP_DATA(OSTAT_INIT)); + break; + case PDC_CHASSIS_DIRECT_BCOMPLETE: retval = pdc_chassis_disp(PDC_CHASSIS_DISP_DATA(OSTAT_RUN)); break; @@ -244,3 +248,50 @@ int pdc_chassis_send_status(int message) #endif /* CONFIG_PDC_CHASSIS */ return retval; } + +#ifdef CONFIG_PDC_CHASSIS_WARN +#ifdef CONFIG_PROC_FS +static int pdc_chassis_warn_pread(char *page, char **start, off_t off, + int count, int *eof, void *data) +{ + char *out = page; + int len, ret; + unsigned long warn; + u32 warnreg; + + ret = pdc_chassis_warn(&warn); + if (ret != PDC_OK) + return -EIO; + + warnreg = (warn & 0xFFFFFFFF); + + if ((warnreg >> 24) & 0xFF) + out += sprintf(out, "Chassis component failure! (eg fan or PSU): 0x%.2x\n", ((warnreg >> 24) & 0xFF)); + + out += sprintf(out, "Battery: %s\n", (warnreg & 0x04) ? "Low!" : "OK"); + out += sprintf(out, "Temp low: %s\n", (warnreg & 0x02) ? "Exceeded!" : "OK"); + out += sprintf(out, "Temp mid: %s\n", (warnreg & 0x01) ? "Exceeded!" : "OK"); + + len = out - page - off; + if (len < count) { + *eof = 1; + if (len <= 0) return 0; + } else { + len = count; + } + *start = page + off; + return len; +} + +static int __init pdc_chassis_create_procfs(void) +{ + printk(KERN_INFO "Enabling PDC chassis warnings support.\n"); + create_proc_read_entry("chassis", 0400, NULL, pdc_chassis_warn_pread, + NULL); + return 0; +} + +__initcall(pdc_chassis_create_procfs); + +#endif /* CONFIG_PROC_FS */ +#endif /* CONFIG_PDC_CHASSIS_WARN */ diff --git a/drivers/parisc/Kconfig b/drivers/parisc/Kconfig index 3f5de867acd..1d3b84b4af3 100644 --- a/drivers/parisc/Kconfig +++ b/drivers/parisc/Kconfig @@ -140,18 +140,37 @@ config CHASSIS_LCD_LED If unsure, say Y. config PDC_CHASSIS - bool "PDC chassis State Panel support" + bool "PDC chassis state codes support" default y help - Say Y here if you want to enable support for the LED State front - panel as found on E class, and support for the GSP Virtual Front - Panel (LED State and message logging) as found on high end - servers such as A, L and N-class. - - This has nothing to do with Chassis LCD and LED support. + Say Y here if you want to enable support for Chassis codes. + That includes support for LED State front panel as found on E + class, and support for the GSP Virtual Front Panel (LED State and + message logging) as found on high end servers such as A, L and + N-class. + This driver will also display progress messages on LCD display, + such as "INI", "RUN" and "FLT", and might thus clobber messages + shown by the LED/LCD driver. + This driver updates the state panel (LED and/or LCD) upon system + state change (eg: boot, shutdown or panic). If unsure, say Y. + +config PDC_CHASSIS_WARN + bool "PDC chassis warnings support" + depends on PROC_FS + default y + help + Say Y here if you want to enable support for Chassis warnings. + This will add a proc entry '/proc/chassis' giving some information + about the overall health state of the system. + This includes NVRAM battery level, overtemp or failures such as + fans or power units. + + If unsure, say Y. + + config PDC_STABLE tristate "PDC Stable Storage support" depends on SYSFS diff --git a/include/asm-parisc/pdc.h b/include/asm-parisc/pdc.h index 08364f957e7..7d8a71a2854 100644 --- a/include/asm-parisc/pdc.h +++ b/include/asm-parisc/pdc.h @@ -719,6 +719,7 @@ void setup_pdc(void); /* in inventory.c */ int pdc_add_valid(unsigned long address); int pdc_chassis_info(struct pdc_chassis_info *chassis_info, void *led_info, unsigned long len); int pdc_chassis_disp(unsigned long disp); +int pdc_chassis_warn(unsigned long *warn); int pdc_coproc_cfg(struct pdc_coproc_cfg *pdc_coproc_info); int pdc_iodc_read(unsigned long *actcnt, unsigned long hpa, unsigned int index, void *iodc_data, unsigned int iodc_data_size); |