diff options
302 files changed, 359 insertions, 512 deletions
diff --git a/Documentation/arm/SA1100/FreeBird b/Documentation/arm/SA1100/FreeBird index fb23b770aaf..ab9193663b2 100644 --- a/Documentation/arm/SA1100/FreeBird +++ b/Documentation/arm/SA1100/FreeBird @@ -1,6 +1,6 @@ -Freebird-1.1 is produced by Legned(C) ,Inc. +Freebird-1.1 is produced by Legend(C), Inc. http://web.archive.org/web/*/http://www.legend.com.cn -and software/linux mainatined by Coventive(C),Inc. +and software/linux maintained by Coventive(C), Inc. (http://www.coventive.com) Based on the Nicolas's strongarm kernel tree. diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 9533af74a12..0b6815504e6 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -1724,7 +1724,7 @@ and is between 256 and 4096 characters. It is defined in the file norandmaps Don't use address space randomization. Equivalent to echo 0 > /proc/sys/kernel/randomize_va_space - noreplace-paravirt [X86-32,PV_OPS] Don't patch paravirt_ops + noreplace-paravirt [X86,IA-64,PV_OPS] Don't patch paravirt_ops noreplace-smp [X86-32,SMP] Don't replace SMP instructions with UP alternatives diff --git a/Documentation/vm/numa_memory_policy.txt b/Documentation/vm/numa_memory_policy.txt index 6690fc34ef6..4e7da654342 100644 --- a/Documentation/vm/numa_memory_policy.txt +++ b/Documentation/vm/numa_memory_policy.txt @@ -424,7 +424,7 @@ a command line tool, numactl(8), exists that allows one to: + set the shared policy for a shared memory segment via mbind(2) -The numactl(8) tool is packages with the run-time version of the library +The numactl(8) tool is packaged with the run-time version of the library containing the memory policy system call wrappers. Some distributions package the headers and compile-time libraries in a separate development package. diff --git a/MAINTAINERS b/MAINTAINERS index 23a4ca9e27f..69aa8fe060b 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -3441,7 +3441,7 @@ F: scripts/package/ KERNEL JANITORS L: kernel-janitors@vger.kernel.org -W: http://janitor.kernelnewbies.org/ +W: http://kernelnewbies.org/KernelJanitors S: Odd Fixes KERNEL NFSD, SUNRPC, AND LOCKD SERVERS diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 3849887157e..b64e465ac49 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -1222,7 +1222,7 @@ config SMP See also <file:Documentation/i386/IO-APIC.txt>, <file:Documentation/nmi_watchdog.txt> and the SMP-HOWTO available at - <http://www.linuxdoc.org/docs.html#howto>. + <http://tldp.org/HOWTO/SMP-HOWTO.html>. If you don't know what to do here, say N. diff --git a/arch/arm/common/icst.c b/arch/arm/common/icst.c index 9a7f09cff30..2dc6da70ae5 100644 --- a/arch/arm/common/icst.c +++ b/arch/arm/common/icst.c @@ -8,7 +8,7 @@ * published by the Free Software Foundation. * * Support functions for calculating clocks/divisors for the ICST307 - * clock generators. See http://www.icst.com/ for more information + * clock generators. See http://www.idt.com/ for more information * on these devices. * * This is an almost identical implementation to the ICST525 clock generator. diff --git a/arch/arm/common/scoop.c b/arch/arm/common/scoop.c index 9012004321d..c11af1e4bad 100644 --- a/arch/arm/common/scoop.c +++ b/arch/arm/common/scoop.c @@ -44,12 +44,12 @@ void reset_scoop(struct device *dev) { struct scoop_dev *sdev = dev_get_drvdata(dev); - iowrite16(0x0100, sdev->base + SCOOP_MCR); // 00 - iowrite16(0x0000, sdev->base + SCOOP_CDR); // 04 - iowrite16(0x0000, sdev->base + SCOOP_CCR); // 10 - iowrite16(0x0000, sdev->base + SCOOP_IMR); // 18 - iowrite16(0x00FF, sdev->base + SCOOP_IRM); // 14 - iowrite16(0x0000, sdev->base + SCOOP_ISR); // 1C + iowrite16(0x0100, sdev->base + SCOOP_MCR); /* 00 */ + iowrite16(0x0000, sdev->base + SCOOP_CDR); /* 04 */ + iowrite16(0x0000, sdev->base + SCOOP_CCR); /* 10 */ + iowrite16(0x0000, sdev->base + SCOOP_IMR); /* 18 */ + iowrite16(0x00FF, sdev->base + SCOOP_IRM); /* 14 */ + iowrite16(0x0000, sdev->base + SCOOP_ISR); /* 1C */ iowrite16(0x0000, sdev->base + SCOOP_IRM); } diff --git a/arch/arm/common/uengine.c b/arch/arm/common/uengine.c index b520e56216a..bef408f3d76 100644 --- a/arch/arm/common/uengine.c +++ b/arch/arm/common/uengine.c @@ -312,16 +312,16 @@ static void generate_ucode(u8 *ucode, u32 *gpr_a, u32 *gpr_b) b1 = (gpr_a[i] >> 8) & 0xff; b0 = gpr_a[i] & 0xff; - // immed[@ai, (b1 << 8) | b0] - // 11110000 0000VVVV VVVV11VV VVVVVV00 1IIIIIII + /* immed[@ai, (b1 << 8) | b0] */ + /* 11110000 0000VVVV VVVV11VV VVVVVV00 1IIIIIII */ ucode[offset++] = 0xf0; ucode[offset++] = (b1 >> 4); ucode[offset++] = (b1 << 4) | 0x0c | (b0 >> 6); ucode[offset++] = (b0 << 2); ucode[offset++] = 0x80 | i; - // immed_w1[@ai, (b3 << 8) | b2] - // 11110100 0100VVVV VVVV11VV VVVVVV00 1IIIIIII + /* immed_w1[@ai, (b3 << 8) | b2] */ + /* 11110100 0100VVVV VVVV11VV VVVVVV00 1IIIIIII */ ucode[offset++] = 0xf4; ucode[offset++] = 0x40 | (b3 >> 4); ucode[offset++] = (b3 << 4) | 0x0c | (b2 >> 6); @@ -340,16 +340,16 @@ static void generate_ucode(u8 *ucode, u32 *gpr_a, u32 *gpr_b) b1 = (gpr_b[i] >> 8) & 0xff; b0 = gpr_b[i] & 0xff; - // immed[@bi, (b1 << 8) | b0] - // 11110000 0000VVVV VVVV001I IIIIII11 VVVVVVVV + /* immed[@bi, (b1 << 8) | b0] */ + /* 11110000 0000VVVV VVVV001I IIIIII11 VVVVVVVV */ ucode[offset++] = 0xf0; ucode[offset++] = (b1 >> 4); ucode[offset++] = (b1 << 4) | 0x02 | (i >> 6); ucode[offset++] = (i << 2) | 0x03; ucode[offset++] = b0; - // immed_w1[@bi, (b3 << 8) | b2] - // 11110100 0100VVVV VVVV001I IIIIII11 VVVVVVVV + /* immed_w1[@bi, (b3 << 8) | b2] */ + /* 11110100 0100VVVV VVVV001I IIIIII11 VVVVVVVV */ ucode[offset++] = 0xf4; ucode[offset++] = 0x40 | (b3 >> 4); ucode[offset++] = (b3 << 4) | 0x02 | (i >> 6); @@ -357,7 +357,7 @@ static void generate_ucode(u8 *ucode, u32 *gpr_a, u32 *gpr_b) ucode[offset++] = b2; } - // ctx_arb[kill] + /* ctx_arb[kill] */ ucode[offset++] = 0xe0; ucode[offset++] = 0x00; ucode[offset++] = 0x01; diff --git a/arch/arm/include/asm/hardware/icst.h b/arch/arm/include/asm/hardware/icst.h index 10382a3dcec..794220b087d 100644 --- a/arch/arm/include/asm/hardware/icst.h +++ b/arch/arm/include/asm/hardware/icst.h @@ -8,7 +8,7 @@ * published by the Free Software Foundation. * * Support functions for calculating clocks/divisors for the ICST - * clock generators. See http://www.icst.com/ for more information + * clock generators. See http://www.idt.com/ for more information * on these devices. */ #ifndef ASMARM_HARDWARE_ICST_H diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig index 851e8139ef9..abed4d15a7f 100644 --- a/arch/arm/mach-at91/Kconfig +++ b/arch/arm/mach-at91/Kconfig @@ -109,7 +109,7 @@ config MACH_ONEARM bool "Ajeco 1ARM Single Board Computer" help Select this if you are using Ajeco's 1ARM Single Board Computer. - <http://www.ajeco.fi/products.htm> + <http://www.ajeco.fi/> config ARCH_AT91RM9200DK bool "Atmel AT91RM9200-DK Development board" @@ -141,7 +141,7 @@ config MACH_CARMEVA bool "Conitec ARM&EVA" help Select this if you are using Conitec's AT91RM9200-MCU-Module. - <http://www.conitec.net/english/linuxboard.htm> + <http://www.conitec.net/english/linuxboard.php> config MACH_ATEB9200 bool "Embest ATEB9200" @@ -153,7 +153,7 @@ config MACH_KB9200 bool "KwikByte KB920x" help Select this if you are using KwikByte's KB920x board. - <http://kwikbyte.com/KB9202_description_new.htm> + <http://www.kwikbyte.com/KB9202.html> config MACH_PICOTUX2XX bool "picotux 200" diff --git a/arch/arm/mach-omap1/Kconfig b/arch/arm/mach-omap1/Kconfig index 3b02d3b944a..5f649637540 100644 --- a/arch/arm/mach-omap1/Kconfig +++ b/arch/arm/mach-omap1/Kconfig @@ -128,7 +128,7 @@ config MACH_OMAP_PALMTT help Support for the Palm Tungsten|T PDA. To boot the kernel, you'll need a PalmOS compatible bootloader (Garux); check out - http://www.hackndev.com/palm/tt/ for more information. + http://garux.sourceforge.net/ for more information. Say Y here if you have this PDA model, say N otherwise. config MACH_SX1 diff --git a/arch/arm/mach-omap2/hsmmc.h b/arch/arm/mach-omap2/hsmmc.h index 1fe6f018717..0f8a2e6ee28 100644 --- a/arch/arm/mach-omap2/hsmmc.h +++ b/arch/arm/mach-omap2/hsmmc.h @@ -23,7 +23,7 @@ struct omap2_hsmmc_info { char *name; /* or NULL for default */ struct device *dev; /* returned: pointer to mmc adapter */ int ocr_mask; /* temporary HACK */ - /* Remux (pad configuation) when powering on/off */ + /* Remux (pad configuration) when powering on/off */ void (*remux)(struct device *dev, int slot, int power_on); /* init some special card */ void (*init_card)(struct mmc_card *card); diff --git a/arch/arm/mach-s3c2440/mach-at2440evb.c b/arch/arm/mach-s3c2440/mach-at2440evb.c index e3810c86a5e..6c98b789b8c 100644 --- a/arch/arm/mach-s3c2440/mach-at2440evb.c +++ b/arch/arm/mach-s3c2440/mach-at2440evb.c @@ -5,7 +5,7 @@ * and modifications by SBZ <sbz@spgui.org> and * Weibing <http://weibing.blogbus.com> * - * For product information, visit http://www.arm9e.com/ + * For product information, visit http://www.arm.com/ * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as diff --git a/arch/arm/mach-sa1100/Kconfig b/arch/arm/mach-sa1100/Kconfig index fd4c52b7ccb..5da8c35aa0d 100644 --- a/arch/arm/mach-sa1100/Kconfig +++ b/arch/arm/mach-sa1100/Kconfig @@ -90,8 +90,8 @@ config SA1100_JORNADA720 # FIXME: select CPU_FREQ_SA11x0 help Say Y here if you want to build a kernel for the HP Jornada 720 - handheld computer. See <http://www.hp.com/jornada/products/720> - for details. + handheld computer. See + <http://h10025.www1.hp.com/ewfrf/wc/product?product=61677&cc=us&lc=en&dlc=en&product=61677#> config SA1100_JORNADA720_SSP bool "HP Jornada 720 Extended SSP driver" @@ -145,7 +145,7 @@ config SA1100_SIMPAD FLASH. The SL4 version got 64 MB RAM and 32 MB FLASH and a PCMCIA-Slot. The version for the Germany Telecom (DTAG) is the same like CL4 in additional it has a PCMCIA-Slot. For more information - visit <http://www.my-siemens.com/> or <http://www.siemens.ch/>. + visit <http://www.usa.siemens.com/> or <http://www.siemens.ch/>. config SA1100_SSP tristate "Generic PIO SSP" diff --git a/arch/arm/mach-sa1100/cpu-sa1100.c b/arch/arm/mach-sa1100/cpu-sa1100.c index ef817876a5d..c0a13ef5436 100644 --- a/arch/arm/mach-sa1100/cpu-sa1100.c +++ b/arch/arm/mach-sa1100/cpu-sa1100.c @@ -13,7 +13,7 @@ * This software has been developed while working on the LART * computing board (http://www.lartmaker.nl/), which is * sponsored by the Mobile Multi-media Communications - * (http://www.mmc.tudelft.nl/) and Ubiquitous Communications + * (http://www.mobimedia.org/) and Ubiquitous Communications * (http://www.ubicom.tudelft.nl/) projects. * * The authors can be reached at: diff --git a/arch/arm/nwfpe/milieu.h b/arch/arm/nwfpe/milieu.h index a3892ab2dca..09a4f2ddeb7 100644 --- a/arch/arm/nwfpe/milieu.h +++ b/arch/arm/nwfpe/milieu.h @@ -12,8 +12,8 @@ National Science Foundation under grant MIP-9311980. The original version of this code was written as part of a project to build a fixed-point vector processor in collaboration with the University of California at Berkeley, overseen by Profs. Nelson Morgan and John Wawrzynek. More information -is available through the Web page `http://HTTP.CS.Berkeley.EDU/~jhauser/ -arithmetic/softfloat.html'. +is available through the Web page +http://www.jhauser.us/arithmetic/SoftFloat-2b/SoftFloat-source.txt THIS SOFTWARE IS DISTRIBUTED AS IS, FOR FREE. Although reasonable effort has been made to avoid it, THIS SOFTWARE MAY CONTAIN FAULTS THAT WILL AT diff --git a/arch/arm/nwfpe/softfloat-macros b/arch/arm/nwfpe/softfloat-macros index 5a060f95a58..cf2a6173149 100644 --- a/arch/arm/nwfpe/softfloat-macros +++ b/arch/arm/nwfpe/softfloat-macros @@ -12,8 +12,8 @@ National Science Foundation under grant MIP-9311980. The original version of this code was written as part of a project to build a fixed-point vector processor in collaboration with the University of California at Berkeley, overseen by Profs. Nelson Morgan and John Wawrzynek. More information -is available through the web page `http://HTTP.CS.Berkeley.EDU/~jhauser/ -arithmetic/softfloat.html'. +is available through the web page +http://www.jhauser.us/arithmetic/SoftFloat-2b/SoftFloat-source.txt THIS SOFTWARE IS DISTRIBUTED AS IS, FOR FREE. Although reasonable effort has been made to avoid it, THIS SOFTWARE MAY CONTAIN FAULTS THAT WILL AT diff --git a/arch/arm/nwfpe/softfloat-specialize b/arch/arm/nwfpe/softfloat-specialize index d4a4c8e0663..679a0269dd2 100644 --- a/arch/arm/nwfpe/softfloat-specialize +++ b/arch/arm/nwfpe/softfloat-specialize @@ -12,8 +12,8 @@ National Science Foundation under grant MIP-9311980. The original version of this code was written as part of a project to build a fixed-point vector processor in collaboration with the University of California at Berkeley, overseen by Profs. Nelson Morgan and John Wawrzynek. More information -is available through the Web page `http://HTTP.CS.Berkeley.EDU/~jhauser/ -arithmetic/softfloat.html'. +is available through the Web page +http://www.jhauser.us/arithmetic/SoftFloat-2b/SoftFloat-source.txt THIS SOFTWARE IS DISTRIBUTED AS IS, FOR FREE. Although reasonable effort has been made to avoid it, THIS SOFTWARE MAY CONTAIN FAULTS THAT WILL AT diff --git a/arch/arm/nwfpe/softfloat.c b/arch/arm/nwfpe/softfloat.c index 0f9656e482b..ffa6b438786 100644 --- a/arch/arm/nwfpe/softfloat.c +++ b/arch/arm/nwfpe/softfloat.c @@ -11,8 +11,8 @@ National Science Foundation under grant MIP-9311980. The original version of this code was written as part of a project to build a fixed-point vector processor in collaboration with the University of California at Berkeley, overseen by Profs. Nelson Morgan and John Wawrzynek. More information -is available through the web page `http://HTTP.CS.Berkeley.EDU/~jhauser/ -arithmetic/softfloat.html'. +is available through the web page +http://www.jhauser.us/arithmetic/SoftFloat-2b/SoftFloat-source.txt THIS SOFTWARE IS DISTRIBUTED AS IS, FOR FREE. Although reasonable effort has been made to avoid it, THIS SOFTWARE MAY CONTAIN FAULTS THAT WILL AT diff --git a/arch/arm/nwfpe/softfloat.h b/arch/arm/nwfpe/softfloat.h index 13e479c5da5..df4d243a2b7 100644 --- a/arch/arm/nwfpe/softfloat.h +++ b/arch/arm/nwfpe/softfloat.h @@ -12,8 +12,8 @@ National Science Foundation under grant MIP-9311980. The original version of this code was written as part of a project to build a fixed-point vector processor in collaboration with the University of California at Berkeley, overseen by Profs. Nelson Morgan and John Wawrzynek. More information -is available through the Web page `http://HTTP.CS.Berkeley.EDU/~jhauser/ -arithmetic/softfloat.html'. +is available through the Web page +http://www.jhauser.us/arithmetic/SoftFloat-2b/SoftFloat-source.txt THIS SOFTWARE IS DISTRIBUTED AS IS, FOR FREE. Although reasonable effort has been made to avoid it, THIS SOFTWARE MAY CONTAIN FAULTS THAT WILL AT diff --git a/arch/arm/plat-samsung/include/plat/adc.h b/arch/arm/plat-samsung/include/plat/adc.h index e8382c7be10..b258a08de59 100644 --- a/arch/arm/plat-samsung/include/plat/adc.h +++ b/arch/arm/plat-samsung/include/plat/adc.h @@ -1,7 +1,7 @@ /* arch/arm/plat-samsung/include/plat/adc.h * * Copyright (c) 2008 Simtec Electronics - * http://armlinux.simnte.co.uk/ + * http://armlinux.simtec.co.uk/ * Ben Dooks <ben@simtec.co.uk> * * S3C ADC driver information diff --git a/arch/avr32/Kconfig b/arch/avr32/Kconfig index 9ac87255a03..f0dc5b8075a 100644 --- a/arch/avr32/Kconfig +++ b/arch/avr32/Kconfig @@ -146,7 +146,7 @@ config BOARD_HAMMERHEAD will cover even the most exceptional need of memory bandwidth. Together with the onboard video decoder the board is ready for video processing. - For more information see: http://www.miromico.com/hammerhead + For more information see: http://www.miromico.ch/index.php/hammerhead.html config BOARD_FAVR_32 bool "Favr-32 LCD-board" diff --git a/arch/blackfin/mach-bf527/boards/ezkit.c b/arch/blackfin/mach-bf527/boards/ezkit.c index 07c132dc412..df82723fb50 100644 --- a/arch/blackfin/mach-bf527/boards/ezkit.c +++ b/arch/blackfin/mach-bf527/boards/ezkit.c @@ -887,7 +887,7 @@ static struct adp5520_keys_platform_data adp5520_keys_data = { }; /* - * ADP5520/5501 Multifuction Device Init Data + * ADP5520/5501 Multifunction Device Init Data */ static struct adp5520_platform_data adp5520_pdev_data = { diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c index c9e0e85629b..cd2c797c8c9 100644 --- a/arch/blackfin/mach-bf537/boards/stamp.c +++ b/arch/blackfin/mach-bf537/boards/stamp.c @@ -2015,7 +2015,7 @@ static struct adp5520_keys_platform_data adp5520_keys_data = { }; /* - * ADP5520/5501 Multifuction Device Init Data + * ADP5520/5501 Multifunction Device Init Data */ static struct adp5520_platform_data adp5520_pdev_data = { diff --git a/arch/h8300/Kconfig.cpu b/arch/h8300/Kconfig.cpu index 6e2ecff199c..d236ab4232c 100644 --- a/arch/h8300/Kconfig.cpu +++ b/arch/h8300/Kconfig.cpu @@ -17,7 +17,7 @@ config H8300H_AKI3068NET help AKI-H8/3068F / AKI-H8/3069F Flashmicom LAN Board Support More Information. (Japanese Only) - <http://akizukidensi.com/catalog/h8.html> + <http://akizukidenshi.com/catalog/default.aspx> AE-3068/69 Evaluation Board Support More Information. <http://www.microtronique.com/ae3069lan.htm> @@ -36,7 +36,7 @@ config H8300H_SIM help GDB Simulator Support More Information. - arch/h8300/Doc/simulator.txt + <http://sourceware.org/sid/> config H8S_GENERIC bool "H8S Generic" @@ -50,14 +50,14 @@ config H8S_EDOSK2674 Renesas EDOSK-2674 Evaluation Board Support More Information. <http://www.azpower.com/H8-uClinux/index.html> - <http://www.eu.renesas.com/tools/edk/support/edosk2674.html> + <http://www.renesas.eu/products/tools/introductory_evaluation_tools/evaluation_development_os_kits/edosk2674r/edosk2674r_software_tools_root.jsp> config H8S_SIM bool "H8S Simulator" help GDB Simulator Support More Information. - arch/h8300/Doc/simulator.txt + <http://sourceware.org/sid/> endchoice diff --git a/arch/h8300/README b/arch/h8300/README index 2fd6f6d7a01..637f5a02f31 100644 --- a/arch/h8300/README +++ b/arch/h8300/README @@ -18,6 +18,7 @@ H8/300H and H8S 4.EDOSK2674 see http://www.eu.renesas.com/products/mpumcu/tool/edk/support/edosk2674.html + http://www.uclinux.org/pub/uClinux/ports/h8/HITACHI-EDOSK2674-HOWTO http://www.azpower.com/H8-uClinux/ * Toolchain Version diff --git a/arch/m32r/Kconfig b/arch/m32r/Kconfig index 836abbbc9c0..3867fd21f33 100644 --- a/arch/m32r/Kconfig +++ b/arch/m32r/Kconfig @@ -315,7 +315,7 @@ config SMP Management" code will be disabled if you say Y here. See also the SMP-HOWTO available at - <http://www.linuxdoc.org/docs.html#howto>. + <http://tldp.org/HOWTO/SMP-HOWTO.html>. If you don't know what to do here, say N. diff --git a/arch/m68k/mac/macboing.c b/arch/m68k/mac/macboing.c index 05285d08e54..ffaa1f6439a 100644 --- a/arch/m68k/mac/macboing.c +++ b/arch/m68k/mac/macboing.c @@ -114,7 +114,8 @@ static void mac_init_asc( void ) * 16-bit I/O functionality. The PowerBook 500 series computers * support 16-bit stereo output, but only mono input." * - * http://til.info.apple.com/techinfo.nsf/artnum/n16405 + * Technical Information Library (TIL) article number 16405. + * http://support.apple.com/kb/TA32601 * * --David Kilzer */ diff --git a/arch/m68k/q40/README b/arch/m68k/q40/README index 6bdbf487957..f877b724979 100644 --- a/arch/m68k/q40/README +++ b/arch/m68k/q40/README @@ -3,7 +3,7 @@ Linux for the Q40 You may try http://www.geocities.com/SiliconValley/Bay/2602/ for some up to date information. Booter and other tools will be also -available from this place or ftp.uni-erlangen.de/linux/680x0/q40/ +available from this place or http://ftp.uni-erlangen.de/pub/unix/Linux/680x0/q40/ and mirrors. Hints to documentation usually refer to the linux source tree in diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 4c9f402295d..784cf822963 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -2196,10 +2196,14 @@ config TC bool "TURBOchannel support" depends on MACH_DECSTATION help - TurboChannel is a DEC (now Compaq (now HP)) bus for Alpha and MIPS - processors. Documentation on writing device drivers for TurboChannel - is available at: - <http://www.cs.arizona.edu/computer.help/policy/DIGITAL_unix/AA-PS3HD-TET1_html/TITLE.html>. + TURBOchannel is a DEC (now Compaq (now HP)) bus for Alpha and MIPS + processors. TURBOchannel programming specifications are available + at: + <ftp://ftp.hp.com/pub/alphaserver/archive/triadd/> + and: + <http://www.computer-refuge.org/classiccmp/ftp.digital.com/pub/DEC/TriAdd/> + Linux driver support status is documented at: + <http://www.linux-mips.org/wiki/DECstation> #config ACCESSBUS # bool "Access.Bus support" diff --git a/arch/mips/math-emu/cp1emu.c b/arch/mips/math-emu/cp1emu.c index 47842b7d26a..ec3faa413f3 100644 --- a/arch/mips/math-emu/cp1emu.c +++ b/arch/mips/math-emu/cp1emu.c @@ -3,7 +3,6 @@ * * MIPS floating point support * Copyright (C) 1994-2000 Algorithmics Ltd. - * http://www.algor.co.uk * * Kevin D. Kissell, kevink@mips.com and Carsten Langgaard, carstenl@mips.com * Copyright (C) 2000 MIPS Technologies, Inc. diff --git a/arch/mips/math-emu/dp_add.c b/arch/mips/math-emu/dp_add.c index bcf73bb5c33..b422fcad852 100644 --- a/arch/mips/math-emu/dp_add.c +++ b/arch/mips/math-emu/dp_add.c @@ -4,7 +4,6 @@ /* * MIPS floating point support * Copyright (C) 1994-2000 Algorithmics Ltd. - * http://www.algor.co.uk * * ######################################################################## * diff --git a/arch/mips/math-emu/dp_cmp.c b/arch/mips/math-emu/dp_cmp.c index 8ab4f320a47..0f32486b0ed 100644 --- a/arch/mips/math-emu/dp_cmp.c +++ b/arch/mips/math-emu/dp_cmp.c @@ -4,7 +4,6 @@ /* * MIPS floating point support * Copyright (C) 1994-2000 Algorithmics Ltd. - * http://www.algor.co.uk * * ######################################################################## * diff --git a/arch/mips/math-emu/dp_div.c b/arch/mips/math-emu/dp_div.c index 6acedce3b32..a1bce1b7c09 100644 --- a/arch/mips/math-emu/dp_div.c +++ b/arch/mips/math-emu/dp_div.c @@ -4,7 +4,6 @@ /* * MIPS floating point support * Copyright (C) 1994-2000 Algorithmics Ltd. - * http://www.algor.co.uk * * ######################################################################## * diff --git a/arch/mips/math-emu/dp_fint.c b/arch/mips/math-emu/dp_fint.c index 39a71de16f4..88571288c9e 100644 --- a/arch/mips/math-emu/dp_fint.c +++ b/arch/mips/math-emu/dp_fint.c @@ -4,7 +4,6 @@ /* * MIPS floating point support * Copyright (C) 1994-2000 Algorithmics Ltd. - * http://www.algor.co.uk * * ######################################################################## * diff --git a/arch/mips/math-emu/dp_flong.c b/arch/mips/math-emu/dp_flong.c index f08f223e488..14fc01ec742 100644 --- a/arch/mips/math-emu/dp_flong.c +++ b/arch/mips/math-emu/dp_flong.c @@ -4,7 +4,6 @@ /* * MIPS floating point support * Copyright (C) 1994-2000 Algorithmics Ltd. - * http://www.algor.co.uk * * ######################################################################## * diff --git a/arch/mips/math-emu/dp_frexp.c b/arch/mips/math-emu/dp_frexp.c index e650cb10c94..cb15a5eaecb 100644 --- a/arch/mips/math-emu/dp_frexp.c +++ b/arch/mips/math-emu/dp_frexp.c @@ -4,7 +4,6 @@ /* * MIPS floating point support * Copyright (C) 1994-2000 Algorithmics Ltd. - * http://www.algor.co.uk * * ######################################################################## * diff --git a/arch/mips/math-emu/dp_fsp.c b/arch/mips/math-emu/dp_fsp.c index 494d19ac704..1dfbd92ba9d 100644 --- a/arch/mips/math-emu/dp_fsp.c +++ b/arch/mips/math-emu/dp_fsp.c @@ -4,7 +4,6 @@ /* * MIPS floating point support * Copyright (C) 1994-2000 Algorithmics Ltd. - * http://www.algor.co.uk * * ######################################################################## * diff --git a/arch/mips/math-emu/dp_logb.c b/arch/mips/math-emu/dp_logb.c index 603388621ca..151127e59f5 100644 --- a/arch/mips/math-emu/dp_logb.c +++ b/arch/mips/math-emu/dp_logb.c @@ -4,7 +4,6 @@ /* * MIPS floating point support * Copyright (C) 1994-2000 Algorithmics Ltd. - * http://www.algor.co.uk * * ######################################################################## * diff --git a/arch/mips/math-emu/dp_modf.c b/arch/mips/math-emu/dp_modf.c index a8570e5c3ef..b01f9cf6d40 100644 --- a/arch/mips/math-emu/dp_modf.c +++ b/arch/mips/math-emu/dp_modf.c @@ -4,7 +4,6 @@ /* * MIPS floating point support * Copyright (C) 1994-2000 Algorithmics Ltd. - * http://www.algor.co.uk * * ######################################################################## * diff --git a/arch/mips/math-emu/dp_mul.c b/arch/mips/math-emu/dp_mul.c index 48908a809c1..aa566e785f5 100644 --- a/arch/mips/math-emu/dp_mul.c +++ b/arch/mips/math-emu/dp_mul.c @@ -4,7 +4,6 @@ /* * MIPS floating point support * Copyright (C) 1994-2000 Algorithmics Ltd. - * http://www.algor.co.uk * * ######################################################################## * diff --git a/arch/mips/math-emu/dp_scalb.c b/arch/mips/math-emu/dp_scalb.c index b84e6338330..6f5df438dda 100644 --- a/arch/mips/math-emu/dp_scalb.c +++ b/arch/mips/math-emu/dp_scalb.c @@ -4,7 +4,6 @@ /* * MIPS floating point support * Copyright (C) 1994-2000 Algorithmics Ltd. - * http://www.algor.co.uk * * ######################################################################## * diff --git a/arch/mips/math-emu/dp_simple.c b/arch/mips/math-emu/dp_simple.c index b90974246e5..79ce2673a71 100644 --- a/arch/mips/math-emu/dp_simple.c +++ b/arch/mips/math-emu/dp_simple.c @@ -4,7 +4,6 @@ /* * MIPS floating point support * Copyright (C) 1994-2000 Algorithmics Ltd. - * http://www.algor.co.uk * * ######################################################################## * diff --git a/arch/mips/math-emu/dp_sqrt.c b/arch/mips/math-emu/dp_sqrt.c index 032328c4988..a2a51b87ae8 100644 --- a/arch/mips/math-emu/dp_sqrt.c +++ b/arch/mips/math-emu/dp_sqrt.c @@ -4,7 +4,6 @@ /* * MIPS floating point support * Copyright (C) 1994-2000 Algorithmics Ltd. - * http://www.algor.co.uk * * ######################################################################## * diff --git a/arch/mips/math-emu/dp_sub.c b/arch/mips/math-emu/dp_sub.c index a2127d685a0..0de098cbc77 100644 --- a/arch/mips/math-emu/dp_sub.c +++ b/arch/mips/math-emu/dp_sub.c @@ -4,7 +4,6 @@ /* * MIPS floating point support * Copyright (C) 1994-2000 Algorithmics Ltd. - * http://www.algor.co.uk * * ######################################################################## * diff --git a/arch/mips/math-emu/dp_tint.c b/arch/mips/math-emu/dp_tint.c index 24478623c11..0ebe8598b94 100644 --- a/arch/mips/math-emu/dp_tint.c +++ b/arch/mips/math-emu/dp_tint.c @@ -4,7 +4,6 @@ /* * MIPS floating point support * Copyright (C) 1994-2000 Algorithmics Ltd. - * http://www.algor.co.uk * * ######################################################################## * diff --git a/arch/mips/math-emu/dp_tlong.c b/arch/mips/math-emu/dp_tlong.c index 0f07ec2be3f..133ce2ba001 100644 --- a/arch/mips/math-emu/dp_tlong.c +++ b/arch/mips/math-emu/dp_tlong.c @@ -4,7 +4,6 @@ /* * MIPS floating point support * Copyright (C) 1994-2000 Algorithmics Ltd. - * http://www.algor.co.uk * * ######################################################################## * diff --git a/arch/mips/math-emu/ieee754.c b/arch/mips/math-emu/ieee754.c index cb1b6822711..30554e1c67b 100644 --- a/arch/mips/math-emu/ieee754.c +++ b/arch/mips/math-emu/ieee754.c @@ -9,7 +9,6 @@ /* * MIPS floating point support * Copyright (C) 1994-2000 Algorithmics Ltd. - * http://www.algor.co.uk * * ######################################################################## * diff --git a/arch/mips/math-emu/ieee754.h b/arch/mips/math-emu/ieee754.h index dd917332792..22796e01206 100644 --- a/arch/mips/math-emu/ieee754.h +++ b/arch/mips/math-emu/ieee754.h @@ -1,7 +1,6 @@ /* * MIPS floating point support * Copyright (C) 1994-2000 Algorithmics Ltd. - * http://www.algor.co.uk * * This program is free software; you can distribute it and/or modify it * under the terms of the GNU General Public License (Version 2) as diff --git a/arch/mips/math-emu/ieee754d.c b/arch/mips/math-emu/ieee754d.c index a0325337b76..9599bdd3258 100644 --- a/arch/mips/math-emu/ieee754d.c +++ b/arch/mips/math-emu/ieee754d.c @@ -4,7 +4,6 @@ * MIPS floating point support * * Copyright (C) 1994-2000 Algorithmics Ltd. - * http://www.algor.co.uk * * This program is free software; you can distribute it and/or modify it * under the terms of the GNU General Public License (Version 2) as diff --git a/arch/mips/math-emu/ieee754dp.c b/arch/mips/math-emu/ieee754dp.c index 2f22fd7fd78..080b5ca03fc 100644 --- a/arch/mips/math-emu/ieee754dp.c +++ b/arch/mips/math-emu/ieee754dp.c @@ -4,7 +4,6 @@ /* * MIPS floating point support * Copyright (C) 1994-2000 Algorithmics Ltd. - * http://www.algor.co.uk * * ######################################################################## * diff --git a/arch/mips/math-emu/ieee754dp.h b/arch/mips/math-emu/ieee754dp.h index 76278653844..f139c724c59 100644 --- a/arch/mips/math-emu/ieee754dp.h +++ b/arch/mips/math-emu/ieee754dp.h @@ -5,7 +5,6 @@ /* * MIPS floating point support * Copyright (C) 1994-2000 Algorithmics Ltd. - * http://www.algor.co.uk * * ######################################################################## * diff --git a/arch/mips/math-emu/ieee754int.h b/arch/mips/math-emu/ieee754int.h index 1a846c5425c..2701d950095 100644 --- a/arch/mips/math-emu/ieee754int.h +++ b/arch/mips/math-emu/ieee754int.h @@ -5,7 +5,6 @@ /* * MIPS floating point support * Copyright (C) 1994-2000 Algorithmics Ltd. - * http://www.algor.co.uk * * ######################################################################## * diff --git a/arch/mips/math-emu/ieee754m.c b/arch/mips/math-emu/ieee754m.c index d66896cd8f2..24190f3c9dd 100644 --- a/arch/mips/math-emu/ieee754m.c +++ b/arch/mips/math-emu/ieee754m.c @@ -4,7 +4,6 @@ /* * MIPS floating point support * Copyright (C) 1994-2000 Algorithmics Ltd. - * http://www.algor.co.uk * * ######################################################################## * diff --git a/arch/mips/math-emu/ieee754sp.c b/arch/mips/math-emu/ieee754sp.c index a19b72185ab..271d00d6113 100644 --- a/arch/mips/math-emu/ieee754sp.c +++ b/arch/mips/math-emu/ieee754sp.c @@ -4,7 +4,6 @@ /* * MIPS floating point support * Copyright (C) 1994-2000 Algorithmics Ltd. - * http://www.algor.co.uk * * ######################################################################## * diff --git a/arch/mips/math-emu/ieee754sp.h b/arch/mips/math-emu/ieee754sp.h index d9e3586b5bc..754fd54649b 100644 --- a/arch/mips/math-emu/ieee754sp.h +++ b/arch/mips/math-emu/ieee754sp.h @@ -5,7 +5,6 @@ /* * MIPS floating point support * Copyright (C) 1994-2000 Algorithmics Ltd. - * http://www.algor.co.uk * * ######################################################################## * diff --git a/arch/mips/math-emu/ieee754xcpt.c b/arch/mips/math-emu/ieee754xcpt.c index e02423a0ae2..b99a693c05a 100644 --- a/arch/mips/math-emu/ieee754xcpt.c +++ b/arch/mips/math-emu/ieee754xcpt.c @@ -1,7 +1,6 @@ /* * MIPS floating point support * Copyright (C) 1994-2000 Algorithmics Ltd. - * http://www.algor.co.uk * * ######################################################################## * diff --git a/arch/mips/math-emu/sp_add.c b/arch/mips/math-emu/sp_add.c index d8c4211bcfb..ae1a327ccac 100644 --- a/arch/mips/math-emu/sp_add.c +++ b/arch/mips/math-emu/sp_add.c @@ -4,7 +4,6 @@ /* * MIPS floating point support * Copyright (C) 1994-2000 Algorithmics Ltd. - * http://www.algor.co.uk * * ######################################################################## * diff --git a/arch/mips/math-emu/sp_cmp.c b/arch/mips/math-emu/sp_cmp.c index d3eff6b04b5..716cf37e246 100644 --- a/arch/mips/math-emu/sp_cmp.c +++ b/arch/mips/math-emu/sp_cmp.c @@ -4,7 +4,6 @@ /* * MIPS floating point support * Copyright (C) 1994-2000 Algorithmics Ltd. - * http://www.algor.co.uk * * ######################################################################## * diff --git a/arch/mips/math-emu/sp_div.c b/arch/mips/math-emu/sp_div.c index 2b437fcfdad..d7747928c95 100644 --- a/arch/mips/math-emu/sp_div.c +++ b/arch/mips/math-emu/sp_div.c @@ -4,7 +4,6 @@ /* * MIPS floating point support * Copyright (C) 1994-2000 Algorithmics Ltd. - * http://www.algor.co.uk * * ######################################################################## * diff --git a/arch/mips/math-emu/sp_fdp.c b/arch/mips/math-emu/sp_fdp.c index 4093723d1aa..e1515aae016 100644 --- a/arch/mips/math-emu/sp_fdp.c +++ b/arch/mips/math-emu/sp_fdp.c @@ -4,7 +4,6 @@ /* * MIPS floating point support * Copyright (C) 1994-2000 Algorithmics Ltd. - * http://www.algor.co.uk * * ######################################################################## * diff --git a/arch/mips/math-emu/sp_fint.c b/arch/mips/math-emu/sp_fint.c index e88e125e01c..9694d6c016c 100644 --- a/arch/mips/math-emu/sp_fint.c +++ b/arch/mips/math-emu/sp_fint.c @@ -4,7 +4,6 @@ /* * MIPS floating point support * Copyright (C) 1994-2000 Algorithmics Ltd. - * http://www.algor.co.uk * * ######################################################################## * diff --git a/arch/mips/math-emu/sp_flong.c b/arch/mips/math-emu/sp_flong.c index 26d6919a269..16a651f2986 100644 --- a/arch/mips/math-emu/sp_flong.c +++ b/arch/mips/math-emu/sp_flong.c @@ -4,7 +4,6 @@ /* * MIPS floating point support * Copyright (C) 1994-2000 Algorithmics Ltd. - * http://www.algor.co.uk * * ######################################################################## * diff --git a/arch/mips/math-emu/sp_frexp.c b/arch/mips/math-emu/sp_frexp.c index 359c6483dbf..5bc993c3004 100644 --- a/arch/mips/math-emu/sp_frexp.c +++ b/arch/mips/math-emu/sp_frexp.c @@ -4,7 +4,6 @@ /* * MIPS floating point support * Copyright (C) 1994-2000 Algorithmics Ltd. - * http://www.algor.co.uk * * ######################################################################## * diff --git a/arch/mips/math-emu/sp_logb.c b/arch/mips/math-emu/sp_logb.c index 3c337219ca3..9c14e0c75bd 100644 --- a/arch/mips/math-emu/sp_logb.c +++ b/arch/mips/math-emu/sp_logb.c @@ -4,7 +4,6 @@ /* * MIPS floating point support * Copyright (C) 1994-2000 Algorithmics Ltd. - * http://www.algor.co.uk * * ######################################################################## * diff --git a/arch/mips/math-emu/sp_modf.c b/arch/mips/math-emu/sp_modf.c index 76568946b4c..25a0fbaa055 100644 --- a/arch/mips/math-emu/sp_modf.c +++ b/arch/mips/math-emu/sp_modf.c @@ -4,7 +4,6 @@ /* * MIPS floating point support * Copyright (C) 1994-2000 Algorithmics Ltd. - * http://www.algor.co.uk * * ######################################################################## * diff --git a/arch/mips/math-emu/sp_mul.c b/arch/mips/math-emu/sp_mul.c index 3f070f82212..c06bb4022be 100644 --- a/arch/mips/math-emu/sp_mul.c +++ b/arch/mips/math-emu/sp_mul.c @@ -4,7 +4,6 @@ /* * MIPS floating point support * Copyright (C) 1994-2000 Algorithmics Ltd. - * http://www.algor.co.uk * * ######################################################################## * diff --git a/arch/mips/math-emu/sp_scalb.c b/arch/mips/math-emu/sp_scalb.c index 44ceb87ea94..dd76196984c 100644 --- a/arch/mips/math-emu/sp_scalb.c +++ b/arch/mips/math-emu/sp_scalb.c @@ -4,7 +4,6 @@ /* * MIPS floating point support * Copyright (C) 1994-2000 Algorithmics Ltd. - * http://www.algor.co.uk * * ######################################################################## * diff --git a/arch/mips/math-emu/sp_simple.c b/arch/mips/math-emu/sp_simple.c index 2fd53c920e9..ae4fcfafd85 100644 --- a/arch/mips/math-emu/sp_simple.c +++ b/arch/mips/math-emu/sp_simple.c @@ -4,7 +4,6 @@ /* * MIPS floating point support * Copyright (C) 1994-2000 Algorithmics Ltd. - * http://www.algor.co.uk * * ######################################################################## * diff --git a/arch/mips/math-emu/sp_sqrt.c b/arch/mips/math-emu/sp_sqrt.c index 8a934b9f7eb..fed20175f5f 100644 --- a/arch/mips/math-emu/sp_sqrt.c +++ b/arch/mips/math-emu/sp_sqrt.c @@ -4,7 +4,6 @@ /* * MIPS floating point support * Copyright (C) 1994-2000 Algorithmics Ltd. - * http://www.algor.co.uk * * ######################################################################## * diff --git a/arch/mips/math-emu/sp_sub.c b/arch/mips/math-emu/sp_sub.c index dbb802c1a08..886ed5bcfef 100644 --- a/arch/mips/math-emu/sp_sub.c +++ b/arch/mips/math-emu/sp_sub.c @@ -4,7 +4,6 @@ /* * MIPS floating point support * Copyright (C) 1994-2000 Algorithmics Ltd. - * http://www.algor.co.uk * * ######################################################################## * diff --git a/arch/mips/math-emu/sp_tint.c b/arch/mips/math-emu/sp_tint.c index 352dc3a5f1a..0fe9acc7716 100644 --- a/arch/mips/math-emu/sp_tint.c +++ b/arch/mips/math-emu/sp_tint.c @@ -4,7 +4,6 @@ /* * MIPS floating point support * Copyright (C) 1994-2000 Algorithmics Ltd. - * http://www.algor.co.uk * * ######################################################################## * diff --git a/arch/mips/math-emu/sp_tlong.c b/arch/mips/math-emu/sp_tlong.c index 92cd9c511a1..d0ca6e22be2 100644 --- a/arch/mips/math-emu/sp_tlong.c +++ b/arch/mips/math-emu/sp_tlong.c @@ -4,7 +4,6 @@ /* * MIPS floating point support * Copyright (C) 1994-2000 Algorithmics Ltd. - * http://www.algor.co.uk * * ######################################################################## * diff --git a/arch/mips/pci/fixup-fuloong2e.c b/arch/mips/pci/fixup-fuloong2e.c index 4f6d8da07f9..d5d4c018fb0 100644 --- a/arch/mips/pci/fixup-fuloong2e.c +++ b/arch/mips/pci/fixup-fuloong2e.c @@ -52,7 +52,7 @@ static void __init loongson2e_nec_fixup(struct pci_dev *pdev) { unsigned int val; - /* Configues port 1, 2, 3, 4 to be validate*/ + /* Configures port 1, 2, 3, 4 to be validate*/ pci_read_config_dword(pdev, 0xe0, &val); pci_write_config_dword(pdev, 0xe0, (val & ~7) | 0x4); diff --git a/arch/mips/sibyte/common/sb_tbprof.c b/arch/mips/sibyte/common/sb_tbprof.c index ca35b730d18..87ccdb4b5ac 100644 --- a/arch/mips/sibyte/common/sb_tbprof.c +++ b/arch/mips/sibyte/common/sb_tbprof.c @@ -43,7 +43,7 @@ #include <asm/sibyte/sb1250_scd.h> #include <asm/sibyte/sb1250_int.h> #else -#error invalid SiByte UART configuation +#error invalid SiByte UART configuration #endif #if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80) diff --git a/arch/powerpc/include/asm/hydra.h b/arch/powerpc/include/asm/hydra.h index 1ad4eed07fb..5b0c98bd46a 100644 --- a/arch/powerpc/include/asm/hydra.h +++ b/arch/powerpc/include/asm/hydra.h @@ -10,7 +10,7 @@ * * © Copyright 1995 Apple Computer, Inc. All rights reserved. * - * It's available online from http://chrp.apple.com/MacTech.pdf. + * It's available online from http://www.cpu.lu/~mlan/ftp/MacTech.pdf * You can obtain paper copies of this book from computer bookstores or by * writing Morgan Kaufmann Publishers, Inc., 340 Pine Street, Sixth Floor, San * Francisco, CA 94104. Reference ISBN 1-55860-393-X. diff --git a/arch/x86/kernel/apm_32.c b/arch/x86/kernel/apm_32.c index fbbc4dadecc..0e4f24c2a74 100644 --- a/arch/x86/kernel/apm_32.c +++ b/arch/x86/kernel/apm_32.c @@ -189,8 +189,8 @@ * Intel Order Number 241704-001. Microsoft Part Number 781-110-X01. * * [This document is available free from Intel by calling 800.628.8686 (fax - * 916.356.6100) or 800.548.4725; or via anonymous ftp from - * ftp://ftp.intel.com/pub/IAL/software_specs/apmv11.doc. It is also + * 916.356.6100) or 800.548.4725; or from + * http://www.microsoft.com/whdc/archive/amp_12.mspx It is also * available from Microsoft by calling 206.882.8080.] * * APM 1.2 Reference: diff --git a/arch/x86/kernel/microcode_core.c b/arch/x86/kernel/microcode_core.c index 0b3d37e8360..1cca374a2ba 100644 --- a/arch/x86/kernel/microcode_core.c +++ b/arch/x86/kernel/microcode_core.c @@ -12,7 +12,7 @@ * Software Developer's Manual * Order Number 253668 or free download from: * - * http://developer.intel.com/design/pentium4/manuals/253668.htm + * http://developer.intel.com/Assets/PDF/manual/253668.pdf * * For more information, go to http://www.urbanmyth.org/microcode * diff --git a/arch/x86/kernel/microcode_intel.c b/arch/x86/kernel/microcode_intel.c index 356170262a9..dcb65cc0a05 100644 --- a/arch/x86/kernel/microcode_intel.c +++ b/arch/x86/kernel/microcode_intel.c @@ -12,7 +12,7 @@ * Software Developer's Manual * Order Number 253668 or free download from: * - * http://developer.intel.com/design/pentium4/manuals/253668.htm + * http://developer.intel.com/Assets/PDF/manual/253668.pdf * * For more information, go to http://www.urbanmyth.org/microcode * diff --git a/arch/xtensa/include/asm/uaccess.h b/arch/xtensa/include/asm/uaccess.h index b8528426ab1..5b0c18c1cce 100644 --- a/arch/xtensa/include/asm/uaccess.h +++ b/arch/xtensa/include/asm/uaccess.h @@ -4,7 +4,7 @@ * User space memory access functions * * These routines provide basic accessing functions to the user memory - * space for the kernel. This header file provides fuctions such as: + * space for the kernel. This header file provides functions such as: * * This file is subject to the terms and conditions of the GNU General Public * License. See the file "COPYING" in the main directory of this archive diff --git a/block/blk-core.c b/block/blk-core.c index 51efd835d4c..881fe44ec7d 100644 --- a/block/blk-core.c +++ b/block/blk-core.c @@ -1669,7 +1669,7 @@ EXPORT_SYMBOL(submit_bio); * the insertion using this generic function. * * This function should also be useful for request stacking drivers - * in some cases below, so export this fuction. + * in some cases below, so export this function. * Request stacking drivers like request-based dm may change the queue * limits while requests are in the queue (e.g. dm's table swapping). * Such request stacking drivers should check those requests agaist diff --git a/drivers/ata/pata_bf54x.c b/drivers/ata/pata_bf54x.c index ec2c777fcdb..7aed5c79259 100644 --- a/drivers/ata/pata_bf54x.c +++ b/drivers/ata/pata_bf54x.c @@ -1588,7 +1588,7 @@ static int __devinit bfin_atapi_probe(struct platform_device *pdev) host->ports[0]->ioaddr.ctl_addr = (void *)res->start; if (peripheral_request_list(atapi_io_port, "atapi-io-port")) { - dev_err(&pdev->dev, "Requesting Peripherals faild\n"); + dev_err(&pdev->dev, "Requesting Peripherals failed\n"); return -EFAULT; } diff --git a/drivers/ata/pata_it821x.c b/drivers/ata/pata_it821x.c index bf88f71a21f..aa0e0c51cc0 100644 --- a/drivers/ata/pata_it821x.c +++ b/drivers/ata/pata_it821x.c @@ -15,8 +15,8 @@ * May be copied or modified under the terms of the GNU General Public License * Based in part on the ITE vendor provided SCSI driver. * - * Documentation available from - * http://www.ite.com.tw/pc/IT8212F_V04.pdf + * Documentation available from IT8212F_V04.pdf + * http://www.ite.com.tw/EN/products_more.aspx?CategoryID=3&ID=5,91 * Some other documents are NDA. * * The ITE8212 isn't exactly a standard IDE controller. It has two diff --git a/drivers/atm/Kconfig b/drivers/atm/Kconfig index be7461c9a87..31c60101a69 100644 --- a/drivers/atm/Kconfig +++ b/drivers/atm/Kconfig @@ -301,7 +301,7 @@ config ATM_IA control memory (128K-1KVC, 512K-4KVC), the size of the packet memory (128K, 512K, 1M), and the PHY type (Single/Multi mode OC3, UTP155, UTP25, DS3 and E3). Go to: - <http://www.iphase.com/products/ClassSheet.cfm?ClassID=ATM> + <http://www.iphase.com/> for more info about the cards. Say Y (or M to compile as a module named iphase) here if you have one of these cards. diff --git a/drivers/base/core.c b/drivers/base/core.c index 2cb49a93b1e..6ed645411c4 100644 --- a/drivers/base/core.c +++ b/drivers/base/core.c @@ -233,7 +233,7 @@ static int dev_uevent(struct kset *kset, struct kobject *kobj, __func__, retval); } - /* have the device type specific fuction add its stuff */ + /* have the device type specific function add its stuff */ if (dev->type && dev->type->uevent) { retval = dev->type->uevent(dev, env); if (retval) diff --git a/drivers/char/agp/Kconfig b/drivers/char/agp/Kconfig index 5ddf67e76f8..fcd867d923b 100644 --- a/drivers/char/agp/Kconfig +++ b/drivers/char/agp/Kconfig @@ -34,7 +34,7 @@ config AGP_ALI X on the following ALi chipsets. The supported chipsets include M1541, M1621, M1631, M1632, M1641,M1647,and M1651. For the ALi-chipset question, ALi suggests you refer to - <http://www.ali.com.tw/eng/support/index.shtml>. + <http://www.ali.com.tw/>. The M1541 chipset can do AGP 1x and 2x, but note that there is an acknowledged incompatibility with Matrox G200 cards. Due to diff --git a/drivers/char/agp/i460-agp.c b/drivers/char/agp/i460-agp.c index e763d3312ce..75b763cb3ea 100644 --- a/drivers/char/agp/i460-agp.c +++ b/drivers/char/agp/i460-agp.c @@ -1,7 +1,7 @@ /* * For documentation on the i460 AGP interface, see Chapter 7 (AGP Subsystem) of * the "Intel 460GTX Chipset Software Developer's Manual": - * http://developer.intel.com/design/itanium/downloads/24870401s.htm + * http://www.intel.com/design/archives/itanium/downloads/248704.htm */ /* * 460GX support by Chris Ahna <christopher.j.ahna@intel.com> diff --git a/drivers/char/apm-emulation.c b/drivers/char/apm-emulation.c index 3022801669b..45b987c9889 100644 --- a/drivers/char/apm-emulation.c +++ b/drivers/char/apm-emulation.c @@ -7,8 +7,8 @@ * Intel Corporation, Microsoft Corporation. Advanced Power Management * (APM) BIOS Interface Specification, Revision 1.2, February 1996. * - * [This document is available from Microsoft at: - * http://www.microsoft.com/hwdev/busbios/amp_12.htm] + * This document is available from Microsoft at: + * http://www.microsoft.com/whdc/archive/amp_12.mspx */ #include <linux/module.h> #include <linux/poll.h> diff --git a/drivers/char/ipmi/ipmi_bt_sm.c b/drivers/char/ipmi/ipmi_bt_sm.c index 7b98c067190..3ed20e8abc0 100644 --- a/drivers/char/ipmi/ipmi_bt_sm.c +++ b/drivers/char/ipmi/ipmi_bt_sm.c @@ -2,7 +2,7 @@ * ipmi_bt_sm.c * * The state machine for an Open IPMI BT sub-driver under ipmi_si.c, part - * of the driver architecture at http://sourceforge.net/project/openipmi + * of the driver architecture at http://sourceforge.net/projects/openipmi * * Author: Rocky Craig <first.last@hp.com> * diff --git a/drivers/char/ipmi/ipmi_si_intf.c b/drivers/char/ipmi/ipmi_si_intf.c index 7bd7c45b53e..e537610d2f0 100644 --- a/drivers/char/ipmi/ipmi_si_intf.c +++ b/drivers/char/ipmi/ipmi_si_intf.c @@ -1974,8 +1974,7 @@ static int acpi_gpe_irq_setup(struct smi_info *info) /* * Defined at - * http://h21007.www2.hp.com/portal/download/files - * /unprot/hpspmi.pdf + * http://h21007.www2.hp.com/portal/download/files/unprot/hpspmi.pdf */ struct SPMITable { s8 Signature[4]; diff --git a/drivers/char/n_r3964.c b/drivers/char/n_r3964.c index a98290d7a2c..88dda0c45ee 100644 --- a/drivers/char/n_r3964.c +++ b/drivers/char/n_r3964.c @@ -4,7 +4,6 @@ * Copyright by * Philips Automation Projects * Kassel (Germany) - * http://www.pap-philips.de * ----------------------------------------------------------- * This software may be used and distributed according to the terms of * the GNU General Public License, incorporated herein by reference. diff --git a/drivers/char/pcmcia/Kconfig b/drivers/char/pcmcia/Kconfig index ffa0efce0ae..6614416a862 100644 --- a/drivers/char/pcmcia/Kconfig +++ b/drivers/char/pcmcia/Kconfig @@ -28,7 +28,7 @@ config CARDMAN_4000 This kernel driver requires additional userspace support, either by the vendor-provided PC/SC ifd_handler (http://www.omnikey.com/), - or via the cm4000 backend of OpenCT (http://www.opensc.com/). + or via the cm4000 backend of OpenCT (http://www.opensc-project.org/opensc). config CARDMAN_4040 tristate "Omnikey CardMan 4040 support" @@ -41,7 +41,7 @@ config CARDMAN_4040 in I/O space. To use the kernel driver, you will need either the PC/SC ifdhandler provided from the Omnikey homepage (http://www.omnikey.com/), or a current development version of OpenCT - (http://www.opensc.org/). + (http://www.opensc-project.org/opensc). config IPWIRELESS tristate "IPWireless 3G UMTS PCMCIA card support" diff --git a/drivers/char/pcmcia/cm4000_cs.c b/drivers/char/pcmcia/cm4000_cs.c index 6835c23e9a5..d962f25dcc2 100644 --- a/drivers/char/pcmcia/cm4000_cs.c +++ b/drivers/char/pcmcia/cm4000_cs.c @@ -1666,7 +1666,7 @@ static int cmm_open(struct inode *inode, struct file *filp) /* opening will always block since the * monitor will be started by open, which * means we have to wait for ATR becoming - * vaild = block until valid (or card + * valid = block until valid (or card * inserted) */ if (filp->f_flags & O_NONBLOCK) { diff --git a/drivers/char/stallion.c b/drivers/char/stallion.c index 8ef16490810..4bef6ab8362 100644 --- a/drivers/char/stallion.c +++ b/drivers/char/stallion.c @@ -3181,7 +3181,7 @@ static void stl_cd1400flush(struct stlport *portp) /* * Return the current state of data flow on this port. This is only - * really interresting when determining if data has fully completed + * really interesting when determining if data has fully completed * transmission or not... This is easy for the cd1400, it accurately * maintains the busy port flag. */ @@ -4131,7 +4131,7 @@ static void stl_sc26198flush(struct stlport *portp) /* * Return the current state of data flow on this port. This is only - * really interresting when determining if data has fully completed + * really interesting when determining if data has fully completed * transmission or not... The sc26198 interrupt scheme cannot * determine when all data has actually drained, so we need to * check the port statusy register to be sure. diff --git a/drivers/char/tpm/Kconfig b/drivers/char/tpm/Kconfig index 4dc338f3d1a..f6595aba4f0 100644 --- a/drivers/char/tpm/Kconfig +++ b/drivers/char/tpm/Kconfig @@ -58,6 +58,6 @@ config TCG_INFINEON To compile this driver as a module, choose M here; the module will be called tpm_infineon. Further information on this driver and the supported hardware - can be found at http://www.prosec.rub.de/tpm + can be found at http://www.trust.rub.de/projects/linux-device-driver-infineon-tpm/ endif # TCG_TPM diff --git a/drivers/char/tpm/tpm_infineon.c b/drivers/char/tpm/tpm_infineon.c index f58440791e6..76da32e11f1 100644 --- a/drivers/char/tpm/tpm_infineon.c +++ b/drivers/char/tpm/tpm_infineon.c @@ -7,7 +7,7 @@ * Copyright (C) 2005, Marcel Selhorst <m.selhorst@sirrix.com> * Sirrix AG - security technologies, http://www.sirrix.com and * Applied Data Security Group, Ruhr-University Bochum, Germany - * Project-Homepage: http://www.prosec.rub.de/tpm + * Project-Homepage: http://www.trust.rub.de/projects/linux-device-driver-infineon-tpm/ * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as diff --git a/drivers/edac/edac_device_sysfs.c b/drivers/edac/edac_device_sysfs.c index 2941dca91aa..400de071cab 100644 --- a/drivers/edac/edac_device_sysfs.c +++ b/drivers/edac/edac_device_sysfs.c @@ -1,7 +1,7 @@ /* * file for managing the edac_device class of devices for EDAC * - * (C) 2007 SoftwareBitMaker (http://www.softwarebitmaker.com) + * (C) 2007 SoftwareBitMaker * * This file may be distributed under the terms of the * GNU General Public License. diff --git a/drivers/edac/i82443bxgx_edac.c b/drivers/edac/i82443bxgx_edac.c index a2fa1feed72..678405ab04e 100644 --- a/drivers/edac/i82443bxgx_edac.c +++ b/drivers/edac/i82443bxgx_edac.c @@ -12,7 +12,7 @@ * 440GX fix by Jason Uhlenkott <juhlenko@akamai.com>. * * Written with reference to 82443BX Host Bridge Datasheet: - * http://www.intel.com/design/chipsets/440/documentation.htm + * http://download.intel.com/design/chipsets/datashts/29063301.pdf * references to this document given in []. * * This module doesn't support the 440LX, but it may be possible to diff --git a/drivers/firmware/Kconfig b/drivers/firmware/Kconfig index 88a3ae6cd02..e8b6a13515b 100644 --- a/drivers/firmware/Kconfig +++ b/drivers/firmware/Kconfig @@ -74,7 +74,8 @@ config EFI_PCDP You must also enable the appropriate drivers (serial, VGA, etc.) - See <http://www.dig64.org/specifications/DIG64_HCDPv20_042804.pdf> + See DIG64_HCDPv20_042804.pdf available from + <http://www.dig64.org/specifications/> config DELL_RBU tristate "BIOS update support for DELL systems via sysfs" diff --git a/drivers/firmware/edd.c b/drivers/firmware/edd.c index f287fe79edc..96c25d93eed 100644 --- a/drivers/firmware/edd.c +++ b/drivers/firmware/edd.c @@ -15,7 +15,7 @@ * made in setup.S, copied to safe structures in setup.c, * and presents it in sysfs. * - * Please see http://linux.dell.com/edd30/results.html for + * Please see http://linux.dell.com/edd/results.html for * the list of BIOSs which have been reported to implement EDD. * * This program is free software; you can redistribute it and/or modify diff --git a/drivers/firmware/pcdp.h b/drivers/firmware/pcdp.h index ce910d68bd1..e5530608e00 100644 --- a/drivers/firmware/pcdp.h +++ b/drivers/firmware/pcdp.h @@ -1,8 +1,8 @@ /* * Definitions for PCDP-defined console devices * - * v1.0a: http://www.dig64.org/specifications/DIG64_HCDPv10a_01.pdf - * v2.0: http://www.dig64.org/specifications/DIG64_PCDPv20.pdf + * For DIG64_HCDPv10a_01.pdf and DIG64_PCDPv20.pdf (v1.0a and v2.0 resp.), + * please see <http://www.dig64.org/specifications/> * * (c) Copyright 2002, 2004 Hewlett-Packard Development Company, L.P. * Khalid Aziz <khalid.aziz@hp.com> diff --git a/drivers/gpu/drm/drm_modes.c b/drivers/gpu/drm/drm_modes.c index 949326d2a8e..58e65f92c23 100644 --- a/drivers/gpu/drm/drm_modes.c +++ b/drivers/gpu/drm/drm_modes.c @@ -76,7 +76,7 @@ EXPORT_SYMBOL(drm_mode_debug_printmodeline); * according to the hdisplay, vdisplay, vrefresh. * It is based from the VESA(TM) Coordinated Video Timing Generator by * Graham Loveridge April 9, 2003 available at - * http://www.vesa.org/public/CVT/CVTd6r1.xls + * http://www.elo.utfsm.cl/~elo212/docs/CVTd6r1.xls * * And it is copied from xf86CVTmode in xserver/hw/xfree86/modes/xf86cvt.c. * What I have done is to translate it by using integer calculation. diff --git a/drivers/gpu/drm/radeon/radeon_cs.c b/drivers/gpu/drm/radeon/radeon_cs.c index fcc79b5d22d..6d64a2705f1 100644 --- a/drivers/gpu/drm/radeon/radeon_cs.c +++ b/drivers/gpu/drm/radeon/radeon_cs.c @@ -268,7 +268,7 @@ int radeon_cs_ioctl(struct drm_device *dev, void *data, struct drm_file *filp) } r = radeon_ib_schedule(rdev, parser.ib); if (r) { - DRM_ERROR("Faild to schedule IB !\n"); + DRM_ERROR("Failed to schedule IB !\n"); } radeon_cs_parser_fini(&parser, r); mutex_unlock(&rdev->cs_mutex); diff --git a/drivers/gpu/drm/radeon/radeon_ttm.c b/drivers/gpu/drm/radeon/radeon_ttm.c index 84c53e41a88..a823d8fe54c 100644 --- a/drivers/gpu/drm/radeon/radeon_ttm.c +++ b/drivers/gpu/drm/radeon/radeon_ttm.c @@ -631,7 +631,7 @@ int radeon_mmap(struct file *filp, struct vm_area_struct *vma) return drm_mmap(filp, vma); } - file_priv = (struct drm_file *)filp->private_data; + file_priv = filp->private_data; rdev = file_priv->minor->dev->dev_private; if (rdev == NULL) { return -EINVAL; diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_fifo.c b/drivers/gpu/drm/vmwgfx/vmwgfx_fifo.c index 0fe31766e4c..635c0ffee7f 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_fifo.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_fifo.c @@ -545,7 +545,7 @@ int vmw_fifo_mmap(struct file *filp, struct vm_area_struct *vma) struct drm_file *file_priv; struct vmw_private *dev_priv; - file_priv = (struct drm_file *)filp->private_data; + file_priv = filp->private_data; dev_priv = vmw_priv(file_priv->minor->dev); if (vma->vm_pgoff != (dev_priv->mmio_start >> PAGE_SHIFT) || diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_ttm_glue.c b/drivers/gpu/drm/vmwgfx/vmwgfx_ttm_glue.c index 83123287c60..1e8eedd901e 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_ttm_glue.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_ttm_glue.c @@ -39,7 +39,7 @@ int vmw_mmap(struct file *filp, struct vm_area_struct *vma) return drm_mmap(filp, vma); } - file_priv = (struct drm_file *)filp->private_data; + file_priv = filp->private_data; dev_priv = vmw_priv(file_priv->minor->dev); return ttm_bo_mmap(filp, vma, &dev_priv->bdev); } diff --git a/drivers/hwmon/adm1025.c b/drivers/hwmon/adm1025.c index 251b63165e2..60befc0ee65 100644 --- a/drivers/hwmon/adm1025.c +++ b/drivers/hwmon/adm1025.c @@ -12,7 +12,7 @@ * resolution of about 0.5% of the nominal value). Temperature values are * reported with a 1 deg resolution and a 3 deg accuracy. Complete * datasheet can be obtained from Analog's website at: - * http://www.analog.com/Analog_Root/productPage/productHome/0,2121,ADM1025,00.html + * http://www.onsemi.com/PowerSolutions/product.do?id=ADM1025 * * This driver also supports the ADM1025A, which differs from the ADM1025 * only in that it has "open-drain VID inputs while the ADM1025 has diff --git a/drivers/hwmon/adm1026.c b/drivers/hwmon/adm1026.c index 65335b268fa..4bf969c0a32 100644 --- a/drivers/hwmon/adm1026.c +++ b/drivers/hwmon/adm1026.c @@ -6,7 +6,7 @@ Chip details at: - <http://www.analog.com/UploadedFiles/Data_Sheets/779263102ADM1026_a.pdf> + <http://www.onsemi.com/PowerSolutions/product.do?id=ADM1026> This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by diff --git a/drivers/hwmon/f75375s.c b/drivers/hwmon/f75375s.c index 9638d58f99f..95cbfb3a707 100644 --- a/drivers/hwmon/f75375s.c +++ b/drivers/hwmon/f75375s.c @@ -6,10 +6,10 @@ * Datasheets available at: * * f75375: - * http://www.fintek.com.tw/files/productfiles/2005111152950.pdf + * http://www.fintek.com.tw/files/productfiles/F75375_V026P.pdf * * f75373: - * http://www.fintek.com.tw/files/productfiles/2005111153128.pdf + * http://www.fintek.com.tw/files/productfiles/F75373_V025P.pdf * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/drivers/hwmon/g760a.c b/drivers/hwmon/g760a.c index 1f63d1a3af5..1d6a6fa31fb 100644 --- a/drivers/hwmon/g760a.c +++ b/drivers/hwmon/g760a.c @@ -5,7 +5,7 @@ Copyright (C) 2007 Herbert Valerio Riedel <hvr@gnu.org> Complete datasheet is available at GMT's website: - http://www.gmt.com.tw/datasheet/g760a.pdf + http://www.gmt.com.tw/product/datasheet/EDS-760A.pdf This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by diff --git a/drivers/hwmon/hwmon-vid.c b/drivers/hwmon/hwmon-vid.c index bf0862a803c..2b2ca1694f9 100644 --- a/drivers/hwmon/hwmon-vid.c +++ b/drivers/hwmon/hwmon-vid.c @@ -38,7 +38,7 @@ * available at http://developer.intel.com/. * * AMD Athlon 64 and AMD Opteron Processors, AMD Publication 26094, - * http://www.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/26094.PDF + * http://support.amd.com/us/Processor_TechDocs/26094.PDF * Table 74. VID Code Voltages * This corresponds to an arbitrary VRM code of 24 in the functions below. * These CPU models (K8 revision <= E) have 5 VID pins. See also: diff --git a/drivers/ide/hpt366.c b/drivers/ide/hpt366.c index 45163693f73..97d98fbf584 100644 --- a/drivers/ide/hpt366.c +++ b/drivers/ide/hpt366.c @@ -12,7 +12,7 @@ * * * HighPoint has its own drivers (open source except for the RAID part) - * available from http://www.highpoint-tech.com/BIOS%20+%20Driver/. + * available from http://www.highpoint-tech.com/USA_new/service_support.htm * This may be useful to anyone wanting to work on this driver, however do not * trust them too much since the code tends to become less and less meaningful * as the time passes... :-/ diff --git a/drivers/ide/ht6560b.c b/drivers/ide/ht6560b.c index d81e49680c3..808bcdcbf8e 100644 --- a/drivers/ide/ht6560b.c +++ b/drivers/ide/ht6560b.c @@ -10,7 +10,6 @@ * Author: Mikko Ala-Fossi <maf@iki.fi> * Jan Evert van Grootheest <j.e.van.grootheest@caiway.nl> * - * Try: http://www.maf.iki.fi/~maf/ht6560b/ */ #define DRV_NAME "ht6560b" diff --git a/drivers/ide/ide-disk.c b/drivers/ide/ide-disk.c index 7c5b01ce51d..274798068a5 100644 --- a/drivers/ide/ide-disk.c +++ b/drivers/ide/ide-disk.c @@ -435,12 +435,11 @@ static int idedisk_prep_fn(struct request_queue *q, struct request *rq) if (!(rq->cmd_flags & REQ_FLUSH)) return BLKPREP_OK; - cmd = kmalloc(sizeof(*cmd), GFP_ATOMIC); + cmd = kzalloc(sizeof(*cmd), GFP_ATOMIC); /* FIXME: map struct ide_taskfile on rq->cmd[] */ BUG_ON(cmd == NULL); - memset(cmd, 0, sizeof(*cmd)); if (ata_id_flush_ext_enabled(drive->id) && (drive->capacity64 >= (1UL << 28))) cmd->tf.command = ATA_CMD_FLUSH_EXT; diff --git a/drivers/infiniband/Kconfig b/drivers/infiniband/Kconfig index 89d70de5e23..6e35eccc9ca 100644 --- a/drivers/infiniband/Kconfig +++ b/drivers/infiniband/Kconfig @@ -16,7 +16,7 @@ config INFINIBAND_USER_MAD Userspace InfiniBand Management Datagram (MAD) support. This is the kernel side of the userspace MAD support, which allows userspace processes to send and receive MADs. You will also - need libibumad from <http://www.openib.org>. + need libibumad from <http://www.openfabrics.org/downloads/management/>. config INFINIBAND_USER_ACCESS tristate "InfiniBand userspace access (verbs and CM)" @@ -28,7 +28,7 @@ config INFINIBAND_USER_ACCESS to set up connections and directly access InfiniBand hardware for fast-path operations. You will also need libibverbs, libibcm and a hardware driver library from - <http://www.openib.org>. + <http://www.openfabrics.org/git/>. config INFINIBAND_USER_MEM bool diff --git a/drivers/infiniband/hw/cxgb3/Kconfig b/drivers/infiniband/hw/cxgb3/Kconfig index 2acec3fadf6..2b6352b8548 100644 --- a/drivers/infiniband/hw/cxgb3/Kconfig +++ b/drivers/infiniband/hw/cxgb3/Kconfig @@ -10,7 +10,7 @@ config INFINIBAND_CXGB3 our website at <http://www.chelsio.com>. For customer support, please visit our customer support page at - <http://www.chelsio.com/support.htm>. + <http://www.chelsio.com/support.html>. Please send feedback to <linux-bugs@chelsio.com>. diff --git a/drivers/infiniband/hw/cxgb4/Kconfig b/drivers/infiniband/hw/cxgb4/Kconfig index ccb85eaaad7..6b7e6c54353 100644 --- a/drivers/infiniband/hw/cxgb4/Kconfig +++ b/drivers/infiniband/hw/cxgb4/Kconfig @@ -10,7 +10,7 @@ config INFINIBAND_CXGB4 our website at <http://www.chelsio.com>. For customer support, please visit our customer support page at - <http://www.chelsio.com/support.htm>. + <http://www.chelsio.com/support.html>. Please send feedback to <linux-bugs@chelsio.com>. diff --git a/drivers/infiniband/hw/qib/qib_file_ops.c b/drivers/infiniband/hw/qib/qib_file_ops.c index aa2be214270..79d9971aff1 100644 --- a/drivers/infiniband/hw/qib/qib_file_ops.c +++ b/drivers/infiniband/hw/qib/qib_file_ops.c @@ -1723,7 +1723,7 @@ static int qib_close(struct inode *in, struct file *fp) mutex_lock(&qib_mutex); - fd = (struct qib_filedata *) fp->private_data; + fd = fp->private_data; fp->private_data = NULL; rcd = fd->rcd; if (!rcd) { @@ -1809,7 +1809,7 @@ static int qib_ctxt_info(struct file *fp, struct qib_ctxt_info __user *uinfo) struct qib_ctxtdata *rcd = ctxt_fp(fp); struct qib_filedata *fd; - fd = (struct qib_filedata *) fp->private_data; + fd = fp->private_data; info.num_active = qib_count_active_units(); info.unit = rcd->dd->unit; diff --git a/drivers/infiniband/ulp/iser/Kconfig b/drivers/infiniband/ulp/iser/Kconfig index b411c51842d..d00af71a2cf 100644 --- a/drivers/infiniband/ulp/iser/Kconfig +++ b/drivers/infiniband/ulp/iser/Kconfig @@ -9,4 +9,4 @@ config INFINIBAND_ISER The iSER protocol is defined by IETF. See <http://www.ietf.org/rfc/rfc5046.txt> - and <http://www.infinibandta.org/members/spec/Annex_iSER.PDF> + and <http://members.infinibandta.org/kwspub/spec/Annex_iSER.PDF> diff --git a/drivers/input/joystick/gamecon.c b/drivers/input/joystick/gamecon.c index 0ffaf2c77a1..e68e4978648 100644 --- a/drivers/input/joystick/gamecon.c +++ b/drivers/input/joystick/gamecon.c @@ -521,9 +521,8 @@ static void gc_multi_process_packet(struct gc *gc) * PSX support * * See documentation at: - * http://www.dim.com/~mackys/psxmemcard/ps-eng2.txt + * http://www.geocities.co.jp/Playtown/2004/psx/ps_eng.txt * http://www.gamesx.com/controldata/psxcont/psxcont.htm - * ftp://milano.usal.es/pablo/ * */ diff --git a/drivers/input/misc/cm109.c b/drivers/input/misc/cm109.c index 2b0eba6619b..b09c7d12721 100644 --- a/drivers/input/misc/cm109.c +++ b/drivers/input/misc/cm109.c @@ -259,7 +259,7 @@ static unsigned short keymap_usbph01(int scancode) /* * Keymap for ATCom AU-100 - * http://www.atcom.cn/En_products_AU100.html + * http://www.atcom.cn/products.html * http://www.packetizer.com/products/au100/ * http://www.voip-info.org/wiki/view/AU-100 * diff --git a/drivers/input/mouse/Kconfig b/drivers/input/mouse/Kconfig index c714ca2407f..bf5fd7f6a31 100644 --- a/drivers/input/mouse/Kconfig +++ b/drivers/input/mouse/Kconfig @@ -30,6 +30,7 @@ config MOUSE_PS2 <http://w1.894.telia.com/~u89404340/touchpad/index.html> and a new version of GPM at: <http://www.geocities.com/dt_or/gpm/gpm.html> + <http://xorg.freedesktop.org/archive/individual/driver/> to take advantage of the advanced features of the touchpad. If unsure, say Y. diff --git a/drivers/input/mouse/touchkit_ps2.c b/drivers/input/mouse/touchkit_ps2.c index 88121c59c3c..1fd8f5e192f 100644 --- a/drivers/input/mouse/touchkit_ps2.c +++ b/drivers/input/mouse/touchkit_ps2.c @@ -21,8 +21,8 @@ * * Based upon touchkitusb.c * - * Vendor documentation is available in support section of: - * http://www.egalax.com.tw/ + * Vendor documentation is available at: + * http://home.eeti.com.tw/web20/drivers/Software%20Programming%20Guide_v2.0.pdf */ #include <linux/kernel.h> diff --git a/drivers/input/touchscreen/mk712.c b/drivers/input/touchscreen/mk712.c index efd3aebaba5..36e57deacd0 100644 --- a/drivers/input/touchscreen/mk712.c +++ b/drivers/input/touchscreen/mk712.c @@ -17,7 +17,7 @@ * found in Gateway AOL Connected Touchpad computers. * * Documentation for ICS MK712 can be found at: - * http://www.icst.com/pdf/mk712.pdf + * http://www.idt.com/products/getDoc.cfm?docID=18713923 */ /* diff --git a/drivers/isdn/i4l/isdn_audio.c b/drivers/isdn/i4l/isdn_audio.c index 861bdf3421f..d5013935ac6 100644 --- a/drivers/isdn/i4l/isdn_audio.c +++ b/drivers/isdn/i4l/isdn_audio.c @@ -439,7 +439,7 @@ isdn_audio_xlaw2adpcm(adpcm_state * s, int fmt, unsigned char *in, /* * Goertzel algorithm. - * See http://ptolemy.eecs.berkeley.edu/~pino/Ptolemy/papers/96/dtmf_ict/ + * See http://ptolemy.eecs.berkeley.edu/papers/96/dtmf_ict/ * for more info. * Result is stored into an sk_buff and queued up for later * evaluation. diff --git a/drivers/macintosh/therm_adt746x.c b/drivers/macintosh/therm_adt746x.c index d0d221332db..9e3e2c56659 100644 --- a/drivers/macintosh/therm_adt746x.c +++ b/drivers/macintosh/therm_adt746x.c @@ -3,9 +3,9 @@ * * Copyright (C) 2003, 2004 Colin Leroy, Rasmus Rohde, Benjamin Herrenschmidt * - * Documentation from - * http://www.analog.com/UploadedFiles/Data_Sheets/115254175ADT7467_pra.pdf - * http://www.analog.com/UploadedFiles/Data_Sheets/3686221171167ADT7460_b.pdf + * Documentation from 115254175ADT7467_pra.pdf and 3686221171167ADT7460_b.pdf + * http://www.onsemi.com/PowerSolutions/product.do?id=ADT7467 + * http://www.onsemi.com/PowerSolutions/product.do?id=ADT7460 * */ diff --git a/drivers/media/IR/keymaps/rc-manli.c b/drivers/media/IR/keymaps/rc-manli.c index 1e9fbfa90a1..0f590b3d01c 100644 --- a/drivers/media/IR/keymaps/rc-manli.c +++ b/drivers/media/IR/keymaps/rc-manli.c @@ -13,7 +13,6 @@ #include <media/rc-map.h> /* Michael Tokarev <mjt@tls.msk.ru> - http://www.corpit.ru/mjt/beholdTV/remote_control.jpg keytable is used by MANLI MTV00[0x0c] and BeholdTV 40[13] at least, and probably other cards too. The "ascii-art picture" below (in comments, first row diff --git a/drivers/media/dvb/ttpci/av7110.c b/drivers/media/dvb/ttpci/av7110.c index 893fbc57c72..a12b88f53ed 100644 --- a/drivers/media/dvb/ttpci/av7110.c +++ b/drivers/media/dvb/ttpci/av7110.c @@ -26,7 +26,7 @@ * Or, point your browser to http://www.gnu.org/copyleft/gpl.html * * - * the project's page is at http://www.linuxtv.org/dvb/ + * the project's page is at http://www.linuxtv.org/ */ @@ -2291,12 +2291,7 @@ static int frontend_init(struct av7110 *av7110) /* Budgetpatch note: * Original hardware design by Roberto Deza: * There is a DVB_Wiki at - * http://212.227.36.83/linuxtv/wiki/index.php/Main_Page - * where is described this 'DVB TT Budget Patch', on Card Modding: - * http://212.227.36.83/linuxtv/wiki/index.php/DVB_TT_Budget_Patch - * On the short description there is also a link to a external file, - * with more details: - * http://perso.wanadoo.es/jesussolano/Ttf_tsc1.zip + * http://www.linuxtv.org/ * * New software triggering design by Emard that works on * original Roberto Deza's hardware: diff --git a/drivers/media/dvb/ttpci/av7110_av.c b/drivers/media/dvb/ttpci/av7110_av.c index 6ef3996565a..244d5d51f5f 100644 --- a/drivers/media/dvb/ttpci/av7110_av.c +++ b/drivers/media/dvb/ttpci/av7110_av.c @@ -25,7 +25,7 @@ * Or, point your browser to http://www.gnu.org/copyleft/gpl.html * * - * the project's page is at http://www.linuxtv.org/dvb/ + * the project's page is at http://www.linuxtv.org/ */ #include <linux/types.h> diff --git a/drivers/media/dvb/ttpci/av7110_ca.c b/drivers/media/dvb/ttpci/av7110_ca.c index 43f61f2eca9..122c7280691 100644 --- a/drivers/media/dvb/ttpci/av7110_ca.c +++ b/drivers/media/dvb/ttpci/av7110_ca.c @@ -25,7 +25,7 @@ * Or, point your browser to http://www.gnu.org/copyleft/gpl.html * * - * the project's page is at http://www.linuxtv.org/dvb/ + * the project's page is at http://www.linuxtv.org/ */ #include <linux/kernel.h> diff --git a/drivers/media/dvb/ttpci/av7110_hw.c b/drivers/media/dvb/ttpci/av7110_hw.c index e162691b515..f1cbfe52698 100644 --- a/drivers/media/dvb/ttpci/av7110_hw.c +++ b/drivers/media/dvb/ttpci/av7110_hw.c @@ -22,7 +22,7 @@ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * Or, point your browser to http://www.gnu.org/copyleft/gpl.html * - * the project's page is at http://www.linuxtv.org/dvb/ + * the project's page is at http://www.linuxtv.org/ */ /* for debugging ARM communication: */ diff --git a/drivers/media/dvb/ttpci/av7110_v4l.c b/drivers/media/dvb/ttpci/av7110_v4l.c index 8986d967d2f..ac20c5bbfa4 100644 --- a/drivers/media/dvb/ttpci/av7110_v4l.c +++ b/drivers/media/dvb/ttpci/av7110_v4l.c @@ -22,7 +22,7 @@ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * Or, point your browser to http://www.gnu.org/copyleft/gpl.html * - * the project's page is at http://www.linuxtv.org/dvb/ + * the project's page is at http://www.linuxtv.org/ */ #include <linux/kernel.h> diff --git a/drivers/media/dvb/ttpci/budget-av.c b/drivers/media/dvb/ttpci/budget-av.c index 983672aa245..97afc01f60d 100644 --- a/drivers/media/dvb/ttpci/budget-av.c +++ b/drivers/media/dvb/ttpci/budget-av.c @@ -30,7 +30,7 @@ * Or, point your browser to http://www.gnu.org/copyleft/gpl.html * * - * the project's page is at http://www.linuxtv.org/dvb/ + * the project's page is at http://www.linuxtv.org/ */ #include "budget.h" diff --git a/drivers/media/dvb/ttpci/budget-ci.c b/drivers/media/dvb/ttpci/budget-ci.c index 13ac9e3ab12..a9c2c326df4 100644 --- a/drivers/media/dvb/ttpci/budget-ci.c +++ b/drivers/media/dvb/ttpci/budget-ci.c @@ -26,7 +26,7 @@ * Or, point your browser to http://www.gnu.org/copyleft/gpl.html * * - * the project's page is at http://www.linuxtv.org/dvb/ + * the project's page is at http://www.linuxtv.org/ */ #include <linux/module.h> diff --git a/drivers/media/dvb/ttpci/budget-core.c b/drivers/media/dvb/ttpci/budget-core.c index ba18e56d5f1..05466131531 100644 --- a/drivers/media/dvb/ttpci/budget-core.c +++ b/drivers/media/dvb/ttpci/budget-core.c @@ -31,7 +31,7 @@ * Or, point your browser to http://www.gnu.org/copyleft/gpl.html * * - * the project's page is at http://www.linuxtv.org/dvb/ + * the project's page is at http://www.linuxtv.org/ */ diff --git a/drivers/media/dvb/ttpci/budget-patch.c b/drivers/media/dvb/ttpci/budget-patch.c index 9c92f9ddd22..57983559069 100644 --- a/drivers/media/dvb/ttpci/budget-patch.c +++ b/drivers/media/dvb/ttpci/budget-patch.c @@ -27,7 +27,7 @@ * Or, point your browser to http://www.gnu.org/copyleft/gpl.html * * - * the project's page is at http://www.linuxtv.org/dvb/ + * the project's page is at http://www.linuxtv.org/ */ #include "av7110.h" diff --git a/drivers/media/dvb/ttpci/budget.c b/drivers/media/dvb/ttpci/budget.c index 874a10a9d49..d238fb9371a 100644 --- a/drivers/media/dvb/ttpci/budget.c +++ b/drivers/media/dvb/ttpci/budget.c @@ -31,7 +31,7 @@ * Or, point your browser to http://www.gnu.org/copyleft/gpl.html * * - * the project's page is at http://www.linuxtv.org/dvb/ + * the project's page is at http://www.linuxtv.org/ */ #include "budget.h" diff --git a/drivers/media/radio/radio-maxiradio.c b/drivers/media/radio/radio-maxiradio.c index 4349213b403..255d40df4b4 100644 --- a/drivers/media/radio/radio-maxiradio.c +++ b/drivers/media/radio/radio-maxiradio.c @@ -13,7 +13,7 @@ * anybody does please mail me. * * For the pdf file see: - * http://www.semiconductors.philips.com/pip/TEA5757H/V1 + * http://www.nxp.com/acrobat_download2/expired_datasheets/TEA5757_5759_3.pdf * * * CHANGES: diff --git a/drivers/media/radio/radio-typhoon.c b/drivers/media/radio/radio-typhoon.c index 03439282dfc..b1f630527dc 100644 --- a/drivers/media/radio/radio-typhoon.c +++ b/drivers/media/radio/radio-typhoon.c @@ -1,9 +1,6 @@ /* Typhoon Radio Card driver for radio support * (c) 1999 Dr. Henrik Seidel <Henrik.Seidel@gmx.de> * - * Card manufacturer: - * http://194.18.155.92/idc/prod2.idc?nr=50753&lang=e - * * Notes on the hardware * * This card has two output sockets, one for speakers and one for line. diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig index f6e4d047535..d000522cb0f 100644 --- a/drivers/media/video/Kconfig +++ b/drivers/media/video/Kconfig @@ -978,7 +978,7 @@ config USB_STKWEBCAM Supported devices are typically found in some Asus laptops, with USB id 174f:a311 and 05e1:0501. Other Syntek cameras may be supported by the stk11xx driver, from which this is - derived, see http://stk11xx.sourceforge.net + derived, see <http://sourceforge.net/projects/syntekdriver/> To compile this driver as a module, choose M here: the module will be called stkwebcam. diff --git a/drivers/media/video/cafe_ccic.c b/drivers/media/video/cafe_ccic.c index be35e696582..9536f1a40dd 100644 --- a/drivers/media/video/cafe_ccic.c +++ b/drivers/media/video/cafe_ccic.c @@ -4,7 +4,7 @@ * sensor. * * The data sheet for this device can be found at: - * http://www.marvell.com/products/pcconn/88ALP01.jsp + * http://www.marvell.com/products/pc_connectivity/88alp01/ * * Copyright 2006 One Laptop Per Child Association, Inc. * Copyright 2006-7 Jonathan Corbet <corbet@lwn.net> diff --git a/drivers/media/video/cx18/cx18-cards.c b/drivers/media/video/cx18/cx18-cards.c index 6b805afe5d2..fe1090940b0 100644 --- a/drivers/media/video/cx18/cx18-cards.c +++ b/drivers/media/video/cx18/cx18-cards.c @@ -39,7 +39,7 @@ static struct cx18_card_tuner_i2c cx18_i2c_std = { .tv = { 0x61, 0x60, I2C_CLIENT_END }, }; -/* Please add new PCI IDs to: http://pci-ids.ucw.cz/iii +/* Please add new PCI IDs to: http://pci-ids.ucw.cz/ This keeps the PCI ID database up to date. Note that the entries must be added under vendor 0x4444 (Conexant) as subsystem IDs. New vendor IDs should still be added to the vendor ID list. */ diff --git a/drivers/media/video/cx23885/cx23885-417.c b/drivers/media/video/cx23885/cx23885-417.c index abd64e89f60..53a67824071 100644 --- a/drivers/media/video/cx23885/cx23885-417.c +++ b/drivers/media/video/cx23885/cx23885-417.c @@ -7,7 +7,7 @@ * (c) 2008 Steven Toth <stoth@linuxtv.org> * - CX23885/7/8 support * - * Includes parts from the ivtv driver( http://ivtv.sourceforge.net/), + * Includes parts from the ivtv driver <http://sourceforge.net/projects/ivtv/> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/drivers/media/video/cx88/cx88-blackbird.c b/drivers/media/video/cx88/cx88-blackbird.c index e46e1ceef72..660b2a927fe 100644 --- a/drivers/media/video/cx88/cx88-blackbird.c +++ b/drivers/media/video/cx88/cx88-blackbird.c @@ -9,7 +9,7 @@ * (c) 2005-2006 Mauro Carvalho Chehab <mchehab@infradead.org> * - video_ioctl2 conversion * - * Includes parts from the ivtv driver( http://ivtv.sourceforge.net/), + * Includes parts from the ivtv driver <http://sourceforge.net/projects/ivtv/> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/drivers/media/video/ivtv/ivtv-cards.c b/drivers/media/video/ivtv/ivtv-cards.c index ca1fd3227a9..87afbbee206 100644 --- a/drivers/media/video/ivtv/ivtv-cards.c +++ b/drivers/media/video/ivtv/ivtv-cards.c @@ -65,7 +65,7 @@ static struct ivtv_card_tuner_i2c ivtv_i2c_tda8290 = { /********************** card configuration *******************************/ -/* Please add new PCI IDs to: http://pci-ids.ucw.cz/iii +/* Please add new PCI IDs to: http://pci-ids.ucw.cz/ This keeps the PCI ID database up to date. Note that the entries must be added under vendor 0x4444 (Conexant) as subsystem IDs. New vendor IDs should still be added to the vendor ID list. */ diff --git a/drivers/media/video/mxb.c b/drivers/media/video/mxb.c index ef0c8178f25..b1dbcf1d2bc 100644 --- a/drivers/media/video/mxb.c +++ b/drivers/media/video/mxb.c @@ -3,7 +3,7 @@ Copyright (C) 1998-2006 Michael Hunold <michael@mihu.de> - Visit http://www.mihu.de/linux/saa7146/mxb/ + Visit http://www.themm.net/~mihu/linux/saa7146/mxb.html for further details about this card. This program is free software; you can redistribute it and/or modify diff --git a/drivers/media/video/sn9c102/sn9c102_pas202bcb.c b/drivers/media/video/sn9c102/sn9c102_pas202bcb.c index 2782f94cf6f..2e86fdc8698 100644 --- a/drivers/media/video/sn9c102/sn9c102_pas202bcb.c +++ b/drivers/media/video/sn9c102/sn9c102_pas202bcb.c @@ -4,7 +4,6 @@ * * * Copyright (C) 2004 by Carlos Eduardo Medaglia Dyonisio * * <medaglia@undl.org.br> * - * http://cadu.homelinux.com:8080/ * * * * Support for SN9C103, DAC Magnitude, exposure and green gain controls * * added by Luca Risolia <luca.risolia@studio.unibo.it> * diff --git a/drivers/media/video/zoran/videocodec.h b/drivers/media/video/zoran/videocodec.h index 5c27b251354..b654bfff874 100644 --- a/drivers/media/video/zoran/videocodec.h +++ b/drivers/media/video/zoran/videocodec.h @@ -56,7 +56,7 @@ the slave is bound to it). Otherwise it doesn't need this functions and therfor they may not be initialized. - The other fuctions are just for convenience, as they are for sure used by + The other functions are just for convenience, as they are for sure used by most/all of the codecs. The last ones may be ommited, too. See the structure declaration below for more information and which data has diff --git a/drivers/media/video/zoran/zoran_driver.c b/drivers/media/video/zoran/zoran_driver.c index 6f89d0a096e..3c471a4e3e4 100644 --- a/drivers/media/video/zoran/zoran_driver.c +++ b/drivers/media/video/zoran/zoran_driver.c @@ -1177,7 +1177,7 @@ static int setup_window(struct zoran_fh *fh, int x, int y, int width, int height if (height > BUZ_MAX_HEIGHT) height = BUZ_MAX_HEIGHT; - /* Check for vaild parameters */ + /* Check for invalid parameters */ if (width < BUZ_MIN_WIDTH || height < BUZ_MIN_HEIGHT || width > BUZ_MAX_WIDTH || height > BUZ_MAX_HEIGHT) { dprintk(1, diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig index db2fbe2d414..1f69743b12e 100644 --- a/drivers/misc/Kconfig +++ b/drivers/misc/Kconfig @@ -112,8 +112,8 @@ config IBM_ASM WARNING: This software may not be supported or function correctly on your IBM server. Please consult the IBM ServerProven - website <http://www.pc.ibm.com/ww/eserver/xseries/serverproven> for - information on the specific driver level and support statement + website <http://www-03.ibm.com/systems/info/x86servers/serverproven/compat/us/> + for information on the specific driver level and support statement for your IBM server. config PHANTOM @@ -385,7 +385,7 @@ config BMP085 depends on I2C && SYSFS help If you say yes here you get support for the Bosch Sensortec - BMP086 digital pressure sensor. + BMP085 digital pressure sensor. To compile this driver as a module, choose M here: the module will be called bmp085. diff --git a/drivers/mtd/chips/cfi_cmdset_0002.c b/drivers/mtd/chips/cfi_cmdset_0002.c index 3e6c47bdce5..ba29d2f0ffd 100644 --- a/drivers/mtd/chips/cfi_cmdset_0002.c +++ b/drivers/mtd/chips/cfi_cmdset_0002.c @@ -418,8 +418,8 @@ struct mtd_info *cfi_cmdset_0002(struct map_info *map, int primary) /* * Valid primary extension versions are: 1.0, 1.1, 1.2, 1.3, 1.4 - * see: http://www.amd.com/us-en/assets/content_type/DownloadableAssets/cfi_r20.pdf, page 19 - * http://www.amd.com/us-en/assets/content_type/DownloadableAssets/cfi_100_20011201.pdf + * see: http://cs.ozerki.net/zap/pub/axim-x5/docs/cfi_r20.pdf, page 19 + * http://www.spansion.com/Support/AppNotes/cfi_100_20011201.pdf * http://www.spansion.com/Support/Datasheets/s29ws-p_00_a12_e.pdf */ if (extp->MajorVersion != '1' || diff --git a/drivers/mtd/devices/lart.c b/drivers/mtd/devices/lart.c index f4359fe7150..caf604167f0 100644 --- a/drivers/mtd/devices/lart.c +++ b/drivers/mtd/devices/lart.c @@ -17,7 +17,7 @@ * - January 2000 * * [2] MTD internal API documentation - * - http://www.linux-mtd.infradead.org/tech/ + * - http://www.linux-mtd.infradead.org/ * * Limitations: * diff --git a/drivers/mtd/ftl.c b/drivers/mtd/ftl.c index 4d6a64c387e..037b399df3f 100644 --- a/drivers/mtd/ftl.c +++ b/drivers/mtd/ftl.c @@ -51,7 +51,7 @@ Use of the FTL format for non-PCMCIA applications may be an infringement of these patents. For additional information, - contact M-Systems (http://www.m-sys.com) directly. + contact M-Systems directly. M-Systems since acquired by Sandisk. ======================================================================*/ #include <linux/mtd/blktrans.h> diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig index 701d942c679..962212628f6 100644 --- a/drivers/mtd/maps/Kconfig +++ b/drivers/mtd/maps/Kconfig @@ -172,7 +172,7 @@ config MTD_OCTAGON This provides a 'mapping' driver which supports the way in which the flash chips are connected in the Octagon-5066 Single Board Computer. More information on the board is available at - <http://www.octagonsystems.com/CPUpages/5066.html>. + <http://www.octagonsystems.com/products/5066.aspx>. config MTD_VMAX tristate "JEDEC Flash device mapped on Tempustech VMAX SBC301" @@ -284,7 +284,7 @@ config MTD_TQM8XXL chips, currently uses AMD one. This 'mapping' driver supports that arrangement, allowing the CFI probe and command set driver code to communicate with the chips on the TQM8xxL board. More at - <http://www.denx.de/embedded-ppc-en.html>. + <http://www.denx.de/wiki/PPCEmbedded/>. config MTD_RPXLITE tristate "CFI Flash device mapped on RPX Lite or CLLF" diff --git a/drivers/mtd/nand/cafe_nand.c b/drivers/mtd/nand/cafe_nand.c index db1dfc5a1b1..e06c8983978 100644 --- a/drivers/mtd/nand/cafe_nand.c +++ b/drivers/mtd/nand/cafe_nand.c @@ -2,7 +2,7 @@ * Driver for One Laptop Per Child ‘CAFÉ’ controller, aka Marvell 88ALP01 * * The data sheet for this device can be found at: - * http://www.marvell.com/products/pcconn/88ALP01.jsp + * http://wiki.laptop.org/go/Datasheets * * Copyright © 2006 Red Hat, Inc. * Copyright © 2006 David Woodhouse <dwmw2@infradead.org> diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 7ca1fc8a3a7..77c1fab7d77 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -924,7 +924,7 @@ config SMC91X including the SMC91C94 and the SMC91C111. Say Y if you want it compiled into the kernel, and read the file <file:Documentation/networking/smc9.txt> and the Ethernet-HOWTO, - available from <http://www.linuxdoc.org/docs.html#howto>. + available from <http://www.tldp.org/docs.html#howto>. This driver is also available as a module ( = code which can be inserted in and removed from the running kernel whenever you want). @@ -1034,7 +1034,7 @@ config SMC911X including the new LAN9115, LAN9116, LAN9117, and LAN9118. Say Y if you want it compiled into the kernel, and read the Ethernet-HOWTO, available from - <http://www.linuxdoc.org/docs.html#howto>. + <http://www.tldp.org/docs.html#howto>. This driver is also available as a module. The module will be called smc911x. If you want to compile it as a module, say M @@ -1516,7 +1516,7 @@ config E100 For the latest Intel PRO/100 network driver for Linux, see: - <http://appsr.intel.com/scripts-df/support_intel.asp> + <http://www.intel.com/p/en_US/support/highlights/network/pro100plus> More specific information on configuring the driver is in <file:Documentation/networking/e100.txt>. @@ -1542,9 +1542,8 @@ config FEALNX select CRC32 select MII help - Say Y here to support the Mysom MTD-800 family of PCI-based Ethernet - cards. Specifications and data at - <http://www.myson.com.hk/mtd/datasheet/>. + Say Y here to support the Myson MTD-800 family of PCI-based Ethernet + cards. <http://www.myson.com.tw/> config NATSEMI tristate "National Semiconductor DP8381x series PCI Ethernet support" @@ -1718,7 +1717,7 @@ config SMSC9420 This is a driver for SMSC's LAN9420 PCI ethernet adapter. Say Y if you want it compiled into the kernel, and read the Ethernet-HOWTO, available from - <http://www.linuxdoc.org/docs.html#howto>. + <http://www.tldp.org/docs.html#howto>. This driver is also available as a module. The module will be called smsc9420. If you want to compile it as a module, say M @@ -2565,7 +2564,7 @@ config CHELSIO_T1 our website at <http://www.chelsio.com>. For customer support, please visit our customer support page at - <http://www.chelsio.com/support.htm>. + <http://www.chelsio.com/support.html>. Please send feedback to <linux-bugs@chelsio.com>. @@ -2597,7 +2596,7 @@ config CHELSIO_T3 our website at <http://www.chelsio.com>. For customer support, please visit our customer support page at - <http://www.chelsio.com/support.htm>. + <http://www.chelsio.com/support.html>. Please send feedback to <linux-bugs@chelsio.com>. @@ -2622,7 +2621,7 @@ config CHELSIO_T4 our website at <http://www.chelsio.com>. For customer support, please visit our customer support page at - <http://www.chelsio.com/support.htm>. + <http://www.chelsio.com/support.html>. Please send feedback to <linux-bugs@chelsio.com>. @@ -2645,7 +2644,7 @@ config CHELSIO_T4VF our website at <http://www.chelsio.com>. For customer support, please visit our customer support page at - <http://www.chelsio.com/support.htm>. + <http://www.chelsio.com/support.html>. Please send feedback to <linux-bugs@chelsio.com>. diff --git a/drivers/net/appletalk/Kconfig b/drivers/net/appletalk/Kconfig index 20f97e7017c..0b376a99097 100644 --- a/drivers/net/appletalk/Kconfig +++ b/drivers/net/appletalk/Kconfig @@ -19,7 +19,7 @@ config ATALK General information about how to connect Linux, Windows machines and Macs is on the WWW at <http://www.eats.com/linux_mac_win.html>. The - NET-3-HOWTO, available from + NET3-4-HOWTO, available from <http://www.tldp.org/docs.html#howto>, contains valuable information as well. diff --git a/drivers/net/atp.c b/drivers/net/atp.c index dfd96b20547..f3459798b0e 100644 --- a/drivers/net/atp.c +++ b/drivers/net/atp.c @@ -68,7 +68,7 @@ static int xcvr[NUM_UNITS]; /* The data transfer mode. */ In 1997 Realtek made available the documentation for the second generation RTL8012 chip, which has lead to several driver improvements. - http://www.realtek.com.tw/cn/cn.html + http://www.realtek.com.tw/ Theory of Operation diff --git a/drivers/net/depca.c b/drivers/net/depca.c index 44c0694c1f4..91b3846ffc8 100644 --- a/drivers/net/depca.c +++ b/drivers/net/depca.c @@ -1487,7 +1487,7 @@ static void __init depca_platform_probe (void) if (!pldev->dev.driver) { /* The driver was not bound to this device, there was * no hardware at this address. Unregister it, as the - * release fuction will take care of freeing the + * release function will take care of freeing the * allocated structure */ depca_io_ports[i].device = NULL; diff --git a/drivers/net/epic100.c b/drivers/net/epic100.c index 32543a300b8..aa56963ad55 100644 --- a/drivers/net/epic100.c +++ b/drivers/net/epic100.c @@ -131,8 +131,8 @@ IIIa. Ring buffers IVb. References -http://www.smsc.com/main/tools/discontinued/83c171.pdf -http://www.smsc.com/main/tools/discontinued/83c175.pdf +http://www.smsc.com/media/Downloads_Public/discontinued/83c171.pdf +http://www.smsc.com/media/Downloads_Public/discontinued/83c175.pdf http://scyld.com/expert/NWay.html http://www.national.com/pf/DP/DP83840A.html diff --git a/drivers/net/hamradio/Kconfig b/drivers/net/hamradio/Kconfig index 62d5d5cfd6a..95dbcfdf131 100644 --- a/drivers/net/hamradio/Kconfig +++ b/drivers/net/hamradio/Kconfig @@ -73,7 +73,7 @@ config DMASCC certain parameters, such as channel access timing, clock mode, and DMA channel. This is accomplished with a small utility program, dmascc_cfg, available at - <http://cacofonix.nt.tuwien.ac.at/~oe1kib/Linux/>. Please be sure to + <http://www.linux-ax25.org/wiki/Ax25-tools>. Please be sure to get at least version 1.27 of dmascc_cfg, as older versions will not work with the current driver. diff --git a/drivers/net/ibmlana.c b/drivers/net/ibmlana.c index 0037a696cd0..94d9969ec0b 100644 --- a/drivers/net/ibmlana.c +++ b/drivers/net/ibmlana.c @@ -23,7 +23,7 @@ paper sources: 'LAN Technical Reference Ethernet Adapter Interface Version 1 Release 1.0 Document Number SC30-3661-00' by IBM for info on the adapter itself - Also see http://www.natsemi.com/ + Also see http://www.national.com/analog special acknowledgements to: - Bob Eager for helping me out with documentation from IBM diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c index 75155a27fdd..14db09e2fa8 100644 --- a/drivers/net/igb/igb_main.c +++ b/drivers/net/igb/igb_main.c @@ -3540,7 +3540,7 @@ enum latency_range { * Stores a new ITR value based on strictly on packet size. This * algorithm is less sophisticated than that used in igb_update_itr, * due to the difficulty of synchronizing statistics across multiple - * receive rings. The divisors and thresholds used by this fuction + * receive rings. The divisors and thresholds used by this function * were determined based on theoretical maximum wire speed and testing * data, in order to minimize response time while increasing bulk * throughput. diff --git a/drivers/net/irda/ali-ircc.c b/drivers/net/irda/ali-ircc.c index a3cb109006a..92631eb6f6a 100644 --- a/drivers/net/irda/ali-ircc.c +++ b/drivers/net/irda/ali-ircc.c @@ -142,7 +142,7 @@ static void SetCOMInterrupts(struct ali_ircc_cb *self , unsigned char enable); * Function ali_ircc_init () * * Initialize chip. Find out whay kinds of chips we are dealing with - * and their configuation registers address + * and their configuration registers address */ static int __init ali_ircc_init(void) { diff --git a/drivers/net/irda/donauboe.h b/drivers/net/irda/donauboe.h index 36c3060411d..4dc39e5f015 100644 --- a/drivers/net/irda/donauboe.h +++ b/drivers/net/irda/donauboe.h @@ -54,7 +54,7 @@ /* anyone who has. HOWEVER the chip bears a striking resemblence */ /* to the IrDA controller in the Toshiba RISC TMPR3922 chip */ /* the documentation for this is freely available at */ -/* http://www.toshiba.com/taec/components/Generic/TMPR3922.shtml */ +/* http://www.madingley.org/james/resources/toshoboe/TMPR3922.pdf */ /* The mapping between the registers in that document and the */ /* Registers in the 701 oboe chip are as follows */ diff --git a/drivers/net/pci-skeleton.c b/drivers/net/pci-skeleton.c index 8dd03439d99..1766dc4f07e 100644 --- a/drivers/net/pci-skeleton.c +++ b/drivers/net/pci-skeleton.c @@ -78,7 +78,7 @@ that almost all frames will need to be copied to an alignment buffer. IVb. References -http://www.realtek.com.tw/cn/cn.html +http://www.realtek.com.tw/ http://www.scyld.com/expert/NWay.html IVc. Errata diff --git a/drivers/net/pcmcia/3c574_cs.c b/drivers/net/pcmcia/3c574_cs.c index 2807a0fcadc..321b12f8264 100644 --- a/drivers/net/pcmcia/3c574_cs.c +++ b/drivers/net/pcmcia/3c574_cs.c @@ -62,7 +62,7 @@ invalid ramWidth is Very Bad. V. References http://www.scyld.com/expert/NWay.html -http://www.national.com/pf/DP/DP83840.html +http://www.national.com/opf/DP/DP83840A.html Thanks to Terry Murphy of 3Com for providing development information for earlier 3Com products. diff --git a/drivers/net/ps3_gelic_net.c b/drivers/net/ps3_gelic_net.c index 5526ab4895e..5ecfa4b1e75 100644 --- a/drivers/net/ps3_gelic_net.c +++ b/drivers/net/ps3_gelic_net.c @@ -642,7 +642,7 @@ static inline void gelic_card_disable_rxdmac(struct gelic_card *card) status = lv1_net_stop_rx_dma(bus_id(card), dev_id(card), 0); if (status) dev_err(ctodev(card), - "lv1_net_stop_rx_dma faild, %d\n", status); + "lv1_net_stop_rx_dma failed, %d\n", status); } /** @@ -660,7 +660,7 @@ static inline void gelic_card_disable_txdmac(struct gelic_card *card) status = lv1_net_stop_tx_dma(bus_id(card), dev_id(card), 0); if (status) dev_err(ctodev(card), - "lv1_net_stop_tx_dma faild, status=%d\n", status); + "lv1_net_stop_tx_dma failed, status=%d\n", status); } /** diff --git a/drivers/net/sb1250-mac.c b/drivers/net/sb1250-mac.c index d8249d7653c..d96d2f7a3f1 100644 --- a/drivers/net/sb1250-mac.c +++ b/drivers/net/sb1250-mac.c @@ -95,7 +95,7 @@ MODULE_PARM_DESC(int_timeout_rx, "RX timeout value"); #include <asm/sibyte/sb1250_regs.h> #include <asm/sibyte/sb1250_int.h> #else -#error invalid SiByte MAC configuation +#error invalid SiByte MAC configuration #endif #include <asm/sibyte/sb1250_scd.h> #include <asm/sibyte/sb1250_mac.h> @@ -106,7 +106,7 @@ MODULE_PARM_DESC(int_timeout_rx, "RX timeout value"); #elif defined(CONFIG_SIBYTE_SB1250) || defined(CONFIG_SIBYTE_BCM112X) #define UNIT_INT(n) (K_INT_MAC_0 + (n)) #else -#error invalid SiByte MAC configuation +#error invalid SiByte MAC configuration #endif #ifdef K_INT_PHY @@ -1568,7 +1568,7 @@ static void sbmac_channel_start(struct sbmac_softc *s) M_MAC_RX_ENABLE | M_MAC_TX_ENABLE, s->sbm_macenable); #else -#error invalid SiByte MAC configuation +#error invalid SiByte MAC configuration #endif #ifdef CONFIG_SBMAC_COALESCE diff --git a/drivers/net/sc92031.c b/drivers/net/sc92031.c index 31b92f5f32c..417adf37282 100644 --- a/drivers/net/sc92031.c +++ b/drivers/net/sc92031.c @@ -15,7 +15,7 @@ * Rewritten for 2.6 by Cesar Eduardo Barros * * A datasheet for this chip can be found at - * http://www.silan.com.cn/english/products/pdf/SC92031AY.pdf + * http://www.silan.com.cn/english/product/pdf/SC92031AY.pdf */ /* Note about set_mac_address: I don't know how to change the hardware diff --git a/drivers/net/skfp/hwt.c b/drivers/net/skfp/hwt.c index e6baa53307c..c0798fd2ca6 100644 --- a/drivers/net/skfp/hwt.c +++ b/drivers/net/skfp/hwt.c @@ -221,7 +221,7 @@ u_long hwt_quick_read(struct s_smc *smc) * para start start time * duration time to wait * - * NOTE: The fuction will return immediately, if the timer is not + * NOTE: The function will return immediately, if the timer is not * started ************************/ void hwt_wait_time(struct s_smc *smc, u_long start, long int duration) diff --git a/drivers/net/skfp/skfddi.c b/drivers/net/skfp/skfddi.c index ba2e8339fe9..0a66fed52e8 100644 --- a/drivers/net/skfp/skfddi.c +++ b/drivers/net/skfp/skfddi.c @@ -33,7 +33,7 @@ * The driver architecture is based on the DEC FDDI driver by * Lawrence V. Stefani and several ethernet drivers. * I also used an existing Windows NT miniport driver. - * All hardware dependent fuctions are handled by the SysKonnect + * All hardware dependent functions are handled by the SysKonnect * Hardware Module. * The only headerfiles that are directly related to this source * are skfddi.c, h/types.h, h/osdef1st.h, h/targetos.h. diff --git a/drivers/net/tlan.c b/drivers/net/tlan.c index ec8c804a795..f8e463cd8ec 100644 --- a/drivers/net/tlan.c +++ b/drivers/net/tlan.c @@ -78,7 +78,7 @@ * - Updated tlan.txt accordingly. * - Adjusted minimum/maximum frame length. * - There is now a TLAN website up at - * http://tlan.kernel.dk + * http://hp.sourceforge.net/ * * v1.7 April 07, 2000 - Started to implement custom ioctls. Driver now * reports PHY information when used with Donald diff --git a/drivers/net/tokenring/tms380tr.c b/drivers/net/tokenring/tms380tr.c index c83f4f6e39e..663b8860a53 100644 --- a/drivers/net/tokenring/tms380tr.c +++ b/drivers/net/tokenring/tms380tr.c @@ -5,7 +5,7 @@ * Originally sktr.c: Written 1997 by Christoph Goos * * A fine result of the Linux Systems Network Architecture Project. - * http://www.linux-sna.org + * http://www.vanheusden.com/sna/ * * This software may be used and distributed according to the terms * of the GNU General Public License, incorporated herein by reference. diff --git a/drivers/net/tulip/Kconfig b/drivers/net/tulip/Kconfig index f3035951422..1f8d4a8d8ea 100644 --- a/drivers/net/tulip/Kconfig +++ b/drivers/net/tulip/Kconfig @@ -151,7 +151,7 @@ config ULI526X select CRC32 ---help--- This driver is for ULi M5261/M5263 10/100M Ethernet Controller - (<http://www.uli.com.tw/>). + (<http://www.nvidia.com/page/uli_drivers.html>). To compile this driver as a module, choose M here. The module will be called uli526x. diff --git a/drivers/net/tulip/pnic2.c b/drivers/net/tulip/pnic2.c index b8197666021..4690c8e6920 100644 --- a/drivers/net/tulip/pnic2.c +++ b/drivers/net/tulip/pnic2.c @@ -59,7 +59,7 @@ * Bit 14:12 - autonegotiation state (write 001 to start autonegotiate) * Bit 3 - Autopolarity state * Bit 2 - LS10B - link state of 10baseT 0 - good, 1 - failed - * Bit 1 - LS100B - link state of 100baseT 0 - good, 1- faild + * Bit 1 - LS100B - link state of 100baseT 0 - good, 1 - failed * * * Data Port Selection Info diff --git a/drivers/net/usb/plusb.c b/drivers/net/usb/plusb.c index 08555f8b15f..08ad269f6b4 100644 --- a/drivers/net/usb/plusb.c +++ b/drivers/net/usb/plusb.c @@ -32,7 +32,7 @@ /* - * Prolific PL-2301/PL-2302 driver ... http://www.prolifictech.com + * Prolific PL-2301/PL-2302 driver ... http://www.prolific.com.tw/ * * The protocol and handshaking used here should be bug-compatible * with the Linux 2.2 "plusb" driver, by Deti Fliegl. diff --git a/drivers/net/wan/Kconfig b/drivers/net/wan/Kconfig index d08ce6a264c..423eb26386c 100644 --- a/drivers/net/wan/Kconfig +++ b/drivers/net/wan/Kconfig @@ -409,7 +409,7 @@ config CYCLADES_SYNC tristate "Cyclom 2X(tm) cards (EXPERIMENTAL)" depends on WAN_ROUTER_DRIVERS && (PCI || ISA) ---help--- - Cyclom 2X from Cyclades Corporation <http://www.cyclades.com/> is an + Cyclom 2X from Cyclades Corporation <http://www.avocent.com/> is an intelligent multiprotocol WAN adapter with data transfer rates up to 512 Kbps. These cards support the X.25 and SNA related protocols. diff --git a/drivers/net/wan/hdlc.c b/drivers/net/wan/hdlc.c index 9937bbab938..5d4bb615ccc 100644 --- a/drivers/net/wan/hdlc.c +++ b/drivers/net/wan/hdlc.c @@ -109,7 +109,7 @@ static int hdlc_device_event(struct notifier_block *this, unsigned long event, return NOTIFY_DONE; /* not an HDLC device */ if (event != NETDEV_CHANGE) - return NOTIFY_DONE; /* Only interrested in carrier changes */ + return NOTIFY_DONE; /* Only interested in carrier changes */ on = netif_carrier_ok(dev); diff --git a/drivers/net/wireless/ath/ath5k/ath5k.h b/drivers/net/wireless/ath/ath5k/ath5k.h index 4a367cdb3eb..308b79e1ff0 100644 --- a/drivers/net/wireless/ath/ath5k/ath5k.h +++ b/drivers/net/wireless/ath/ath5k/ath5k.h @@ -348,7 +348,7 @@ struct ath5k_srev_name { /* * Some of this information is based on Documentation from: * - * http://madwifi.org/wiki/ChipsetFeatures/SuperAG + * http://madwifi-project.org/wiki/ChipsetFeatures/SuperAG * * Modulation for Atheros' eXtended Range - range enhancing extension that is * supposed to double the distance an Atheros client device can keep a diff --git a/drivers/net/wireless/ath/ath5k/reg.h b/drivers/net/wireless/ath/ath5k/reg.h index a34929f0653..ca79ecd832f 100644 --- a/drivers/net/wireless/ath/ath5k/reg.h +++ b/drivers/net/wireless/ath/ath5k/reg.h @@ -26,7 +26,6 @@ * Atheros presentations and papers like these: * * 5210 - http://nova.stanford.edu/~bbaas/ps/isscc2002_slides.pdf - * http://www.it.iitb.ac.in/~janak/wifire/01222734.pdf * * 5211 - http://www.hotchips.org/archives/hc14/3_Tue/16_mcfarland.pdf * diff --git a/drivers/net/wireless/hostap/hostap_hw.c b/drivers/net/wireless/hostap/hostap_hw.c index e9d9d622a9b..b7cb165d612 100644 --- a/drivers/net/wireless/hostap/hostap_hw.c +++ b/drivers/net/wireless/hostap/hostap_hw.c @@ -2621,7 +2621,7 @@ static irqreturn_t prism2_interrupt(int irq, void *dev_id) iface = netdev_priv(dev); local = iface->local; - /* Detect early interrupt before driver is fully configued */ + /* Detect early interrupt before driver is fully configured */ spin_lock(&local->irq_init_lock); if (!dev->base_addr) { if (net_ratelimit()) { diff --git a/drivers/net/wireless/p54/Kconfig b/drivers/net/wireless/p54/Kconfig index e5f45cb2a7a..25f965ffc88 100644 --- a/drivers/net/wireless/p54/Kconfig +++ b/drivers/net/wireless/p54/Kconfig @@ -9,7 +9,7 @@ config P54_COMMON also need to be enabled in order to support any devices. These devices require softmac firmware which can be found at - http://prism54.org/ + <http://wireless.kernel.org/en/users/Drivers/p54> If you choose to build a module, it'll be called p54common. @@ -21,7 +21,7 @@ config P54_USB This driver is for USB isl38xx based wireless cards. These devices require softmac firmware which can be found at - http://prism54.org/ + <http://wireless.kernel.org/en/users/Drivers/p54> If you choose to build a module, it'll be called p54usb. @@ -35,7 +35,7 @@ config P54_PCI supported by the fullmac driver/firmware. This driver requires softmac firmware which can be found at - http://prism54.org/ + <http://wireless.kernel.org/en/users/Drivers/p54> If you choose to build a module, it'll be called p54pci. diff --git a/drivers/net/wireless/prism54/islpci_hotplug.c b/drivers/net/wireless/prism54/islpci_hotplug.c index dc14420a9ad..b5e64d71b7a 100644 --- a/drivers/net/wireless/prism54/islpci_hotplug.c +++ b/drivers/net/wireless/prism54/islpci_hotplug.c @@ -38,7 +38,7 @@ module_param(init_pcitm, int, 0); /* In this order: vendor, device, subvendor, subdevice, class, class_mask, * driver_data * If you have an update for this please contact prism54-devel@prism54.org - * The latest list can be found at http://prism54.org/supported_cards.php */ + * The latest list can be found at http://wireless.kernel.org/en/users/Drivers/p54 */ static DEFINE_PCI_DEVICE_TABLE(prism54_id_tbl) = { /* Intersil PRISM Duette/Prism GT Wireless LAN adapter */ { diff --git a/drivers/parisc/README.dino b/drivers/parisc/README.dino index 097324f34bb..1627426996c 100644 --- a/drivers/parisc/README.dino +++ b/drivers/parisc/README.dino @@ -10,8 +10,7 @@ ** PCI bus. HP-supplied graphics cards that utilize the PCI bus are ** not affected." ** -** REVISIT: "go/pci_defect" link below is stale. -** HP Internal can use <http://hpfcdma.fc.hp.com:80/Dino/> +** http://h20000.www2.hp.com/bizsupport/TechSupport/Home.jsp?locale=en_US&prodTypeId=12454&prodSeriesId=44443 ** ** Product First Good Serial Number ** C200/C240 (US) US67350000 diff --git a/drivers/parport/parport_pc.c b/drivers/parport/parport_pc.c index 0950fa40684..8d62fb76cd4 100644 --- a/drivers/parport/parport_pc.c +++ b/drivers/parport/parport_pc.c @@ -2599,7 +2599,7 @@ static int __devinit sio_ite_8872_probe(struct pci_dev *pdev, int autoirq, printk(KERN_INFO "parport_pc: ITE8873 found (1S)\n"); return 0; case 0x8: - DPRINTK(KERN_DEBUG "parport_pc: ITE8874 found (2S)\n"); + printk(KERN_INFO "parport_pc: ITE8874 found (2S)\n"); return 0; default: printk(KERN_INFO "parport_pc: unknown ITE887x\n"); diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index 857ae01734a..cc96c7142da 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -226,6 +226,7 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82439TX, quir * VIA Apollo KT133 needs PCI latency patch * Made according to a windows driver based patch by George E. Breese * see PCI Latency Adjust on http://www.viahardware.com/download/viatweak.shtm + * and http://www.georgebreese.com/net/software/#PCI * Also see http://www.au-ja.org/review-kt133a-1-en.phtml for * the info on which Mr Breese based his work. * @@ -1016,7 +1017,7 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_TOSHIBA, 0x605, quirk_transparent_bridge) /* * Common misconfiguration of the MediaGX/Geode PCI master that will * reduce PCI bandwidth from 70MB/s to 25MB/s. See the GXM/GXLV/GX1 - * datasheets found at http://www.national.com/ds/GX for info on what + * datasheets found at http://www.national.com/analog for info on what * these bits do. <christer@weinigel.se> */ static void quirk_mediagx_master(struct pci_dev *dev) diff --git a/drivers/pcmcia/yenta_socket.c b/drivers/pcmcia/yenta_socket.c index 408dbaa080a..9dc565c615b 100644 --- a/drivers/pcmcia/yenta_socket.c +++ b/drivers/pcmcia/yenta_socket.c @@ -1072,7 +1072,7 @@ static void yenta_config_init(struct yenta_socket *socket) * invisible during PCI scans because of a misconfigured subordinate number * of the parent brige - some BIOSes seem to be too lazy to set it right. * Does the fixup carefully by checking how far it can go without conflicts. - * See http\://bugzilla.kernel.org/show_bug.cgi?id=2944 for more information. + * See http://bugzilla.kernel.org/show_bug.cgi?id=2944 for more information. */ static void yenta_fixup_parent_bridge(struct pci_bus *cardbus_bridge) { diff --git a/drivers/pnp/pnpbios/proc.c b/drivers/pnp/pnpbios/proc.c index 2d8ac43f78e..bc89f392a62 100644 --- a/drivers/pnp/pnpbios/proc.c +++ b/drivers/pnp/pnpbios/proc.c @@ -11,7 +11,6 @@ * * The .../escd file is utilized by the lsescd utility written by * Gunther Mayer. - * http://home.t-online.de/home/gunther.mayer/lsescd * * The .../legacy_device_resources file is not used yet. * diff --git a/drivers/rtc/rtc-nuc900.c b/drivers/rtc/rtc-nuc900.c index 62de66af0a6..ddb0857e15a 100644 --- a/drivers/rtc/rtc-nuc900.c +++ b/drivers/rtc/rtc-nuc900.c @@ -274,7 +274,7 @@ static int __devinit nuc900_rtc_probe(struct platform_device *pdev) nuc900_rtc->rtcdev = rtc_device_register(pdev->name, &pdev->dev, &nuc900_rtc_ops, THIS_MODULE); if (IS_ERR(nuc900_rtc->rtcdev)) { - dev_err(&pdev->dev, "rtc device register faild\n"); + dev_err(&pdev->dev, "rtc device register failed\n"); err = PTR_ERR(nuc900_rtc->rtcdev); goto fail3; } diff --git a/drivers/s390/block/dasd_3990_erp.c b/drivers/s390/block/dasd_3990_erp.c index 85bfd879485..e82d427ff5e 100644 --- a/drivers/s390/block/dasd_3990_erp.c +++ b/drivers/s390/block/dasd_3990_erp.c @@ -2197,7 +2197,7 @@ dasd_3990_erp_inspect_32(struct dasd_ccw_req * erp, char *sense) /* ***************************************************************************** - * main ERP control fuctions (24 and 32 byte sense) + * main ERP control functions (24 and 32 byte sense) ***************************************************************************** */ diff --git a/drivers/s390/block/dasd_eckd.c b/drivers/s390/block/dasd_eckd.c index 66360c24bd4..59b4ecfb967 100644 --- a/drivers/s390/block/dasd_eckd.c +++ b/drivers/s390/block/dasd_eckd.c @@ -1190,7 +1190,7 @@ dasd_eckd_check_characteristics(struct dasd_device *device) goto out_err2; } /* - * dasd_eckd_vaildate_server is done on the first device that + * dasd_eckd_validate_server is done on the first device that * is found for an LCU. All later other devices have to wait * for it, so they will read the correct feature codes. */ @@ -1216,7 +1216,7 @@ dasd_eckd_check_characteristics(struct dasd_device *device) "Read device characteristic failed, rc=%d", rc); goto out_err3; } - /* find the vaild cylinder size */ + /* find the valid cylinder size */ if (private->rdc_data.no_cyl == LV_COMPAT_CYL && private->rdc_data.long_no_cyl) private->real_cyl = private->rdc_data.long_no_cyl; diff --git a/drivers/s390/char/tape_3590.c b/drivers/s390/char/tape_3590.c index fc993acf99b..deff2c3361e 100644 --- a/drivers/s390/char/tape_3590.c +++ b/drivers/s390/char/tape_3590.c @@ -31,7 +31,7 @@ debug_info_t *TAPE_DBF_AREA = NULL; EXPORT_SYMBOL(TAPE_DBF_AREA); /******************************************************************* - * Error Recovery fuctions: + * Error Recovery functions: * - Read Opposite: implemented * - Read Device (buffered) log: BRA * - Read Library log: BRA @@ -798,7 +798,7 @@ tape_3590_done(struct tape_device *device, struct tape_request *request) } /* - * This fuction is called, when error recovery was successfull + * This function is called, when error recovery was successful */ static inline int tape_3590_erp_succeded(struct tape_device *device, struct tape_request *request) @@ -809,7 +809,7 @@ tape_3590_erp_succeded(struct tape_device *device, struct tape_request *request) } /* - * This fuction is called, when error recovery was not successfull + * This function is called, when error recovery was not successful */ static inline int tape_3590_erp_failed(struct tape_device *device, struct tape_request *request, diff --git a/drivers/s390/char/vmcp.c b/drivers/s390/char/vmcp.c index 0e7cb1a8415..31a3ccbb649 100644 --- a/drivers/s390/char/vmcp.c +++ b/drivers/s390/char/vmcp.c @@ -47,7 +47,7 @@ static int vmcp_release(struct inode *inode, struct file *file) { struct vmcp_session *session; - session = (struct vmcp_session *)file->private_data; + session = file->private_data; file->private_data = NULL; free_pages((unsigned long)session->response, get_order(session->bufsize)); kfree(session); @@ -94,7 +94,7 @@ vmcp_write(struct file *file, const char __user *buff, size_t count, return -EFAULT; } cmd[count] = '\0'; - session = (struct vmcp_session *)file->private_data; + session = file->private_data; if (mutex_lock_interruptible(&session->mutex)) { kfree(cmd); return -ERESTARTSYS; @@ -136,7 +136,7 @@ static long vmcp_ioctl(struct file *file, unsigned int cmd, unsigned long arg) int __user *argp; int temp; - session = (struct vmcp_session *)file->private_data; + session = file->private_data; if (is_compat_task()) argp = compat_ptr(arg); else diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig index 2e9632e2c98..8616496ffc0 100644 --- a/drivers/scsi/Kconfig +++ b/drivers/scsi/Kconfig @@ -116,7 +116,7 @@ config CHR_DEV_OSST <http://www.tldp.org/docs.html#howto> and <file:Documentation/scsi/osst.txt> in the kernel source. More info on the OnStream driver may be found on - <http://linux1.onstream.nl/test/> + <http://sourceforge.net/projects/osst/> Please also have a look at the standard st docu, as most of it applies to osst as well. @@ -156,9 +156,9 @@ config CHR_DEV_SG directly, so you need some additional software which knows how to talk to these devices using the SCSI protocol: - For scanners, look at SANE (<http://www.mostang.com/sane/>). For CD + For scanners, look at SANE (<http://www.sane-project.org/>). For CD writer software look at Cdrtools - (<http://www.fokus.gmd.de/research/cc/glone/employees/joerg.schilling/private/cdrecord.html>) + (<http://cdrecord.berlios.de/private/cdrecord.html>) and for burning a "disk at once": CDRDAO (<http://cdrdao.sourceforge.net/>). Cdparanoia is a high quality digital reader of audio CDs (<http://www.xiph.org/paranoia/>). @@ -951,6 +951,7 @@ config SCSI_IPS ---help--- This is support for the IBM ServeRAID hardware RAID controllers. See <http://www.developer.ibm.com/welcome/netfinity/serveraid.html> + and <http://www-947.ibm.com/support/entry/portal/docdisplay?brand=5000008&lndocid=SERV-RAID> for more information. If this driver does not work correctly without modification please contact the author by email at <ipslinux@adaptec.com>. @@ -1610,7 +1611,7 @@ config SCSI_DEBUG host adapter with one dummy SCSI disk. Each dummy disk uses kernel RAM as storage (i.e. it is a ramdisk). To save space when multiple dummy disks are simulated, they share the same kernel RAM for - their storage. See <http://www.torque.net/sg/sdebug.html> for more + their storage. See <http://sg.danny.cz/sg/sdebug26.html> for more information. This driver is primarily of use to those testing the SCSI and block subsystems. If unsure, say N. diff --git a/drivers/scsi/aacraid/linit.c b/drivers/scsi/aacraid/linit.c index dae46d779c7..29c0ed1cf50 100644 --- a/drivers/scsi/aacraid/linit.c +++ b/drivers/scsi/aacraid/linit.c @@ -771,7 +771,7 @@ static long aac_compat_cfg_ioctl(struct file *file, unsigned cmd, unsigned long { if (!capable(CAP_SYS_RAWIO)) return -EPERM; - return aac_compat_do_ioctl((struct aac_dev *)file->private_data, cmd, arg); + return aac_compat_do_ioctl(file->private_data, cmd, arg); } #endif diff --git a/drivers/scsi/lpfc/lpfc_hbadisc.c b/drivers/scsi/lpfc/lpfc_hbadisc.c index c3d7174e346..a345dde16c8 100644 --- a/drivers/scsi/lpfc/lpfc_hbadisc.c +++ b/drivers/scsi/lpfc/lpfc_hbadisc.c @@ -5509,7 +5509,7 @@ lpfc_get_rec_conf23(uint8_t *buff, uint32_t size, uint8_t rec_type) * @buff: Buffer containing config region 23 data. * @size: Size of the data buffer. * - * This fuction parse the FCoE config parameters in config region 23 and + * This function parses the FCoE config parameters in config region 23 and * populate driver data structure with the parameters. */ void diff --git a/drivers/scsi/sg.c b/drivers/scsi/sg.c index 5428d53f5a1..909ed9ed24c 100644 --- a/drivers/scsi/sg.c +++ b/drivers/scsi/sg.c @@ -212,7 +212,7 @@ static void sg_put_dev(Sg_device *sdp); static int sg_allow_access(struct file *filp, unsigned char *cmd) { - struct sg_fd *sfp = (struct sg_fd *)filp->private_data; + struct sg_fd *sfp = filp->private_data; if (sfp->parentdp->device->type == TYPE_SCANNER) return 0; diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c index 167c4a6ccbc..4d8e14b7aa9 100644 --- a/drivers/serial/8250.c +++ b/drivers/serial/8250.c @@ -919,7 +919,7 @@ static int broken_efr(struct uart_8250_port *up) /* * Exar ST16C2550 "A2" devices incorrectly detect as * having an EFR, and report an ID of 0x0201. See - * http://www.exar.com/info.php?pdf=dan180_oct2004.pdf + * http://linux.derkeiler.com/Mailing-Lists/Kernel/2004-11/4812.html */ if (autoconfig_read_divisor_id(up) == 0x0201 && size_fifo(up) == 16) return 1; diff --git a/drivers/serial/bfin_sport_uart.c b/drivers/serial/bfin_sport_uart.c index 6f1b51e231e..e95c524d9d1 100644 --- a/drivers/serial/bfin_sport_uart.c +++ b/drivers/serial/bfin_sport_uart.c @@ -10,7 +10,7 @@ /* * This driver and the hardware supported are in term of EE-191 of ADI. - * http://www.analog.com/UploadedFiles/Application_Notes/399447663EE191.pdf + * http://www.analog.com/static/imported-files/application_notes/EE191.pdf * This application note describe how to implement a UART on a Sharc DSP, * but this driver is implemented on Blackfin Processor. * Transmit Frame Sync is not used by this driver to transfer data out. diff --git a/drivers/serial/bfin_sport_uart.h b/drivers/serial/bfin_sport_uart.h index 9ce253e381d..6d06ce1d567 100644 --- a/drivers/serial/bfin_sport_uart.h +++ b/drivers/serial/bfin_sport_uart.h @@ -10,7 +10,7 @@ /* * This driver and the hardware supported are in term of EE-191 of ADI. - * http://www.analog.com/UploadedFiles/Application_Notes/399447663EE191.pdf + * http://www.analog.com/static/imported-files/application_notes/EE191.pdf * This application note describe how to implement a UART on a Sharc DSP, * but this driver is implemented on Blackfin Processor. * Transmit Frame Sync is not used by this driver to transfer data out. diff --git a/drivers/serial/uartlite.c b/drivers/serial/uartlite.c index c4bf54bb3fc..d2fce865b73 100644 --- a/drivers/serial/uartlite.c +++ b/drivers/serial/uartlite.c @@ -44,7 +44,7 @@ MODULE_DEVICE_TABLE(of, ulite_of_match); * Register definitions * * For register details see datasheet: - * http://www.xilinx.com/bvdocs/ipcenter/data_sheet/opb_uartlite.pdf + * http://www.xilinx.com/support/documentation/ip_documentation/opb_uartlite.pdf */ #define ULITE_RX 0x00 diff --git a/drivers/staging/asus_oled/README b/drivers/staging/asus_oled/README index 96b9717f168..0d82a6d5fa5 100644 --- a/drivers/staging/asus_oled/README +++ b/drivers/staging/asus_oled/README @@ -2,7 +2,7 @@ Driver for Asus OLED display present in some Asus laptops. The code of this driver is based on 'asusoled' program taken from - https://launchpad.net/asusoled/. I just wanted to have a simple + <http://lapsus.berlios.de/asus_oled.html>. I just wanted to have a simple kernel driver for controlling this device, but I didn't know how to do that. Now I know ;) Also, that program can not be used with usbhid loaded, which means no USB mouse/keyboard while diff --git a/drivers/staging/asus_oled/asus_oled.c b/drivers/staging/asus_oled/asus_oled.c index 5b279fb30f3..8c95d8c2a4f 100644 --- a/drivers/staging/asus_oled/asus_oled.c +++ b/drivers/staging/asus_oled/asus_oled.c @@ -24,7 +24,7 @@ * * * Asus OLED support is based on asusoled program taken from - * https://launchpad.net/asusoled/. + * <http://lapsus.berlios.de/asus_oled.html>. * * */ diff --git a/drivers/staging/comedi/drivers/cb_pcimdas.c b/drivers/staging/comedi/drivers/cb_pcimdas.c index ced346a7cae..78b1410ba4f 100644 --- a/drivers/staging/comedi/drivers/cb_pcimdas.c +++ b/drivers/staging/comedi/drivers/cb_pcimdas.c @@ -37,7 +37,7 @@ Configuration Options: Developed from cb_pcidas and skel by Richard Bytheway (mocelet@sucs.org). Only supports DIO, AO and simple AI in it's present form. No interrupts, multi channel or FIFO AI, although the card looks like it could support this. -See http://www.measurementcomputing.com/PDFManuals/pcim-das1602_16.pdf for more details. +See http://www.mccdaq.com/PDFs/Manuals/pcim-das1602-16.pdf for more details. */ #include "../comedidev.h" diff --git a/drivers/staging/comedi/drivers/daqboard2000.c b/drivers/staging/comedi/drivers/daqboard2000.c index 6af6c8323d5..82be77daa7d 100644 --- a/drivers/staging/comedi/drivers/daqboard2000.c +++ b/drivers/staging/comedi/drivers/daqboard2000.c @@ -50,8 +50,8 @@ Configuration options: With some help from our swedish distributor, we got the Windows sourcecode for the card, and here are the findings so far. - 1. A good document that describes the PCI interface chip is found at: - http://plx.plxtech.com/download/9080/databook/9080db-106.pdf + 1. A good document that describes the PCI interface chip is 9080db-106.pdf + available from http://www.plxtech.com/products/io/pci9080 2. The initialization done so far is: a. program the FPGA (windows code sans a lot of error messages) diff --git a/drivers/staging/comedi/drivers/ni_labpc.c b/drivers/staging/comedi/drivers/ni_labpc.c index 3acf7e62bec..1411dd8f4e7 100644 --- a/drivers/staging/comedi/drivers/ni_labpc.c +++ b/drivers/staging/comedi/drivers/ni_labpc.c @@ -37,7 +37,7 @@ boards has not yet been added to the driver, mainly due to the fact that I don't know the device id numbers. If you have one of these boards, -please file a bug report at https://bugs.comedi.org/ +please file a bug report at http://comedi.org/ so I can get the necessary information from you. The 1200 series boards have onboard calibration dacs for correcting diff --git a/drivers/staging/comedi/drivers/ni_mio_common.c b/drivers/staging/comedi/drivers/ni_mio_common.c index bd16f913af2..986ef671298 100644 --- a/drivers/staging/comedi/drivers/ni_mio_common.c +++ b/drivers/staging/comedi/drivers/ni_mio_common.c @@ -34,7 +34,7 @@ 340747b.pdf AT-MIO E series Register Level Programmer Manual 341079b.pdf PCI E Series RLPM 340934b.pdf DAQ-STC reference manual - 67xx and 611x registers (from http://www.ni.com/pdf/daq/us) + 67xx and 611x registers (from ftp://ftp.ni.com/support/daq/mhddk/documentation/) release_ni611x.pdf release_ni67xx.pdf Other possibly relevant info: diff --git a/drivers/staging/comedi/drivers/plx9080.h b/drivers/staging/comedi/drivers/plx9080.h index 485d63f9929..0d254a1b78a 100644 --- a/drivers/staging/comedi/drivers/plx9080.h +++ b/drivers/staging/comedi/drivers/plx9080.h @@ -13,7 +13,7 @@ * ******************************************************************** * - * Copyright (C) 1999 RG Studio s.c., http://www.rgstudio.com.pl/ + * Copyright (C) 1999 RG Studio s.c. * Written by Krzysztof Halasa <khc@rgstudio.com.pl> * * Portions (C) SBE Inc., used by permission. diff --git a/drivers/staging/comedi/drivers/rtd520.c b/drivers/staging/comedi/drivers/rtd520.c index 0367d2b9e2f..a49a7c566d3 100644 --- a/drivers/staging/comedi/drivers/rtd520.c +++ b/drivers/staging/comedi/drivers/rtd520.c @@ -59,7 +59,7 @@ Configuration options: Data sheet: http://www.rtdusa.com/pdf/dm7520.pdf Example source: http://www.rtdusa.com/examples/dm/dm7520.zip Call them and ask for the register level manual. - PCI chip: http://www.plxtech.com/products/toolbox/9080.htm + PCI chip: http://www.plxtech.com/products/io/pci9080 Notes: This board is memory mapped. There is some IO stuff, but it isn't needed. diff --git a/drivers/staging/quickstart/quickstart.c b/drivers/staging/quickstart/quickstart.c index 66122479d52..ba8f670ec0a 100644 --- a/drivers/staging/quickstart/quickstart.c +++ b/drivers/staging/quickstart/quickstart.c @@ -5,8 +5,7 @@ * Copyright (C) 2007-2010 Angelo Arrifano <miknix@gmail.com> * * Information gathered from disassebled dsdt and from here: - * "http://download.microsoft.com/download/9/c/5/ - * 9c5b2167-8017-4bae-9fde-d599bac8184a/DirAppLaunch_Vista.doc" + * <http://www.microsoft.com/whdc/system/platform/firmware/DirAppLaunch.mspx> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/drivers/uio/Kconfig b/drivers/uio/Kconfig index 1da73ecd979..bb440792a1b 100644 --- a/drivers/uio/Kconfig +++ b/drivers/uio/Kconfig @@ -17,9 +17,9 @@ config UIO_CIF depends on PCI help Driver for Hilscher CIF DeviceNet and Profibus cards. This - driver requires a userspace component that handles all of the - heavy lifting and can be found at: - http://www.osadl.org/projects/downloads/UIO/user/cif-* + driver requires a userspace component called cif that handles + all of the heavy lifting and can be found at: + <http://www.osadl.org/projects/downloads/UIO/user/> To compile this driver as a module, choose M here: the module will be called uio_cif. diff --git a/drivers/usb/gadget/at91_udc.c b/drivers/usb/gadget/at91_udc.c index 387e503b9d1..bdec36acd0f 100644 --- a/drivers/usb/gadget/at91_udc.c +++ b/drivers/usb/gadget/at91_udc.c @@ -1266,7 +1266,6 @@ write_in: csr |= AT91_UDP_TXPKTRDY; __raw_writel(csr, creg); udc->req_pending = 0; - return; } static void handle_ep0(struct at91_udc *udc) diff --git a/drivers/usb/gadget/f_audio.c b/drivers/usb/gadget/f_audio.c index 1f48ceb55a7..00975ed903d 100644 --- a/drivers/usb/gadget/f_audio.c +++ b/drivers/usb/gadget/f_audio.c @@ -317,8 +317,6 @@ static void f_audio_playback_work(struct work_struct *data) u_audio_playback(&audio->card, play_buf->buf, play_buf->actual); f_audio_buffer_free(play_buf); - - return; } static int f_audio_out_ep_complete(struct usb_ep *ep, struct usb_request *req) diff --git a/drivers/usb/gadget/f_hid.c b/drivers/usb/gadget/f_hid.c index 2b98bd26364..4f891eddd06 100644 --- a/drivers/usb/gadget/f_hid.c +++ b/drivers/usb/gadget/f_hid.c @@ -318,8 +318,6 @@ static void hidg_set_report_complete(struct usb_ep *ep, struct usb_request *req) spin_unlock(&hidg->spinlock); wake_up(&hidg->read_queue); - - return; } static int hidg_setup(struct usb_function *f, @@ -413,8 +411,6 @@ static void hidg_disable(struct usb_function *f) usb_ep_disable(hidg->in_ep); hidg->in_ep->driver_data = NULL; - - return; } static int hidg_set_alt(struct usb_function *f, unsigned intf, unsigned alt) diff --git a/drivers/usb/gadget/fsl_udc_core.c b/drivers/usb/gadget/fsl_udc_core.c index c16b402a876..4c55eda4bd2 100644 --- a/drivers/usb/gadget/fsl_udc_core.c +++ b/drivers/usb/gadget/fsl_udc_core.c @@ -287,8 +287,6 @@ static void dr_controller_run(struct fsl_udc *udc) temp = fsl_readl(&dr_regs->usbcmd); temp |= USB_CMD_RUN_STOP; fsl_writel(temp, &dr_regs->usbcmd); - - return; } static void dr_controller_stop(struct fsl_udc *udc) @@ -308,8 +306,6 @@ static void dr_controller_stop(struct fsl_udc *udc) tmp = fsl_readl(&dr_regs->usbcmd); tmp &= ~USB_CMD_RUN_STOP; fsl_writel(tmp, &dr_regs->usbcmd); - - return; } static void dr_ep_setup(unsigned char ep_num, unsigned char dir, @@ -416,8 +412,6 @@ static void struct_ep_qh_setup(struct fsl_udc *udc, unsigned char ep_num, p_QH->max_pkt_length = cpu_to_le32(tmp); p_QH->next_dtd_ptr = 1; p_QH->size_ioc_int_sts = 0; - - return; } /* Setup qh structure and ep register for ep0. */ diff --git a/drivers/usb/gadget/pxa27x_udc.c b/drivers/usb/gadget/pxa27x_udc.c index 027d66f8162..2efd6732d13 100644 --- a/drivers/usb/gadget/pxa27x_udc.c +++ b/drivers/usb/gadget/pxa27x_udc.c @@ -1394,8 +1394,6 @@ static void pxa_ep_fifo_flush(struct usb_ep *_ep) } spin_unlock_irqrestore(&ep->lock, flags); - - return; } /** diff --git a/drivers/usb/gadget/rndis.c b/drivers/usb/gadget/rndis.c index 5b314041dfa..d3cdffea9c8 100644 --- a/drivers/usb/gadget/rndis.c +++ b/drivers/usb/gadget/rndis.c @@ -918,8 +918,6 @@ void rndis_deregister(int configNr) if (configNr >= RNDIS_MAX_CONFIGS) return; rndis_per_dev_params[configNr].used = 0; - - return; } int rndis_set_param_dev(u8 configNr, struct net_device *dev, u16 *cdc_filter) diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index 15fe3ecd203..2adae8e39bb 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -1095,7 +1095,6 @@ nogood: ep->hcpriv = NULL; done: spin_unlock_irqrestore (&ehci->lock, flags); - return; } static void diff --git a/drivers/usb/host/imx21-hcd.c b/drivers/usb/host/imx21-hcd.c index 1dfb2c8f770..e49b75a7800 100644 --- a/drivers/usb/host/imx21-hcd.c +++ b/drivers/usb/host/imx21-hcd.c @@ -27,8 +27,8 @@ * * 32 transfer descriptors (called ETDs) * * 4Kb of Data memory * - * The data memory is shared between the host and fuction controlers - * (but this driver only supports the host controler) + * The data memory is shared between the host and function controllers + * (but this driver only supports the host controller) * * So setting up a transfer involves: * * Allocating a ETD diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c index 3b5785032a1..f3713f43f3f 100644 --- a/drivers/usb/host/ohci-hcd.c +++ b/drivers/usb/host/ohci-hcd.c @@ -370,7 +370,6 @@ sanitize: } ep->hcpriv = NULL; spin_unlock_irqrestore (&ohci->lock, flags); - return; } static int ohci_get_frame (struct usb_hcd *hcd) diff --git a/drivers/usb/host/oxu210hp-hcd.c b/drivers/usb/host/oxu210hp-hcd.c index d32c3eae99c..32149be4ad8 100644 --- a/drivers/usb/host/oxu210hp-hcd.c +++ b/drivers/usb/host/oxu210hp-hcd.c @@ -544,8 +544,6 @@ static void oxu_buf_free(struct oxu_hcd *oxu, struct ehci_qtd *qtd) qtd->buffer = NULL; spin_unlock(&oxu->mem_lock); - - return; } static inline void ehci_qtd_init(struct ehci_qtd *qtd, dma_addr_t dma) @@ -571,8 +569,6 @@ static inline void oxu_qtd_free(struct oxu_hcd *oxu, struct ehci_qtd *qtd) oxu->qtd_used[index] = 0; spin_unlock(&oxu->mem_lock); - - return; } static struct ehci_qtd *ehci_qtd_alloc(struct oxu_hcd *oxu) @@ -615,8 +611,6 @@ static void oxu_qh_free(struct oxu_hcd *oxu, struct ehci_qh *qh) oxu->qh_used[index] = 0; spin_unlock(&oxu->mem_lock); - - return; } static void qh_destroy(struct kref *kref) @@ -693,8 +687,6 @@ static void oxu_murb_free(struct oxu_hcd *oxu, struct oxu_murb *murb) oxu->murb_used[index] = 0; spin_unlock(&oxu->mem_lock); - - return; } static struct oxu_murb *oxu_murb_alloc(struct oxu_hcd *oxu) @@ -3070,7 +3062,6 @@ nogood: ep->hcpriv = NULL; done: spin_unlock_irqrestore(&oxu->lock, flags); - return; } static int oxu_get_frame(struct usb_hcd *hcd) diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c index 464ed977b45..4c502c890eb 100644 --- a/drivers/usb/host/pci-quirks.c +++ b/drivers/usb/host/pci-quirks.c @@ -342,8 +342,6 @@ static void __devinit quirk_usb_disable_ehci(struct pci_dev *pdev) writel(0x3f, op_reg_base + EHCI_USBSTS); iounmap(base); - - return; } /* diff --git a/drivers/usb/host/u132-hcd.c b/drivers/usb/host/u132-hcd.c index 5b31bae92db..fab764946c7 100644 --- a/drivers/usb/host/u132-hcd.c +++ b/drivers/usb/host/u132-hcd.c @@ -316,7 +316,6 @@ static void u132_ring_requeue_work(struct u132 *u132, struct u132_ring *ring, } else if (queue_delayed_work(workqueue, &ring->scheduler, 0)) return; kref_put(&u132->kref, u132_hcd_delete); - return; } static void u132_ring_queue_work(struct u132 *u132, struct u132_ring *ring, @@ -324,7 +323,6 @@ static void u132_ring_queue_work(struct u132 *u132, struct u132_ring *ring, { kref_get(&u132->kref); u132_ring_requeue_work(u132, ring, delta); - return; } static void u132_ring_cancel_work(struct u132 *u132, struct u132_ring *ring) @@ -543,7 +541,6 @@ static void u132_hcd_giveback_urb(struct u132 *u132, struct u132_endp *endp, mutex_unlock(&u132->scheduler_lock); u132_endp_put_kref(u132, endp); usb_hcd_giveback_urb(hcd, urb, status); - return; } static void u132_hcd_forget_urb(struct u132 *u132, struct u132_endp *endp, @@ -574,8 +571,8 @@ static void u132_hcd_abandon_urb(struct u132 *u132, struct u132_endp *endp, endp->active = 0; spin_unlock_irqrestore(&endp->queue_lock.slock, irqs); kfree(urbq); - } usb_hcd_giveback_urb(hcd, urb, status); - return; + } + usb_hcd_giveback_urb(hcd, urb, status); } static inline int edset_input(struct u132 *u132, struct u132_ring *ring, @@ -3085,7 +3082,6 @@ static void u132_initialise(struct u132 *u132, struct platform_device *pdev) u132->endp[endps] = NULL; mutex_unlock(&u132->sw_lock); - return; } static int __devinit u132_probe(struct platform_device *pdev) diff --git a/drivers/usb/image/microtek.c b/drivers/usb/image/microtek.c index 3a6bcd5fee0..5a47805d958 100644 --- a/drivers/usb/image/microtek.c +++ b/drivers/usb/image/microtek.c @@ -398,7 +398,6 @@ void mts_int_submit_urb (struct urb* transfer, context->srb->result = DID_ERROR << 16; mts_transfer_cleanup(transfer); } - return; } @@ -409,7 +408,6 @@ static void mts_transfer_cleanup( struct urb *transfer ) if ( likely(context->final_callback != NULL) ) context->final_callback(context->srb); - } static void mts_transfer_done( struct urb *transfer ) @@ -420,8 +418,6 @@ static void mts_transfer_done( struct urb *transfer ) context->srb->result |= (unsigned)(*context->scsi_status)<<1; mts_transfer_cleanup(transfer); - - return; } @@ -452,8 +448,6 @@ static void mts_data_done( struct urb* transfer ) } mts_get_status(transfer); - - return; } @@ -496,8 +490,6 @@ static void mts_command_done( struct urb *transfer ) mts_get_status(transfer); } } - - return; } static void mts_do_sg (struct urb* transfer) @@ -522,7 +514,6 @@ static void mts_do_sg (struct urb* transfer) sg[context->fragment].length, context->fragment + 1 == scsi_sg_count(context->srb) ? mts_data_done : mts_do_sg); - return; } static const u8 mts_read_image_sig[] = { 0x28, 00, 00, 00 }; diff --git a/drivers/usb/misc/ftdi-elan.c b/drivers/usb/misc/ftdi-elan.c index c8eec9c2d89..7839c98fa74 100644 --- a/drivers/usb/misc/ftdi-elan.c +++ b/drivers/usb/misc/ftdi-elan.c @@ -456,7 +456,6 @@ static void ftdi_elan_cancel_targets(struct usb_ftdi *ftdi) static void ftdi_elan_kick_command_queue(struct usb_ftdi *ftdi) { ftdi_command_queue_work(ftdi, 0); - return; } static void ftdi_elan_command_work(struct work_struct *work) @@ -483,7 +482,6 @@ static void ftdi_elan_command_work(struct work_struct *work) static void ftdi_elan_kick_respond_queue(struct usb_ftdi *ftdi) { ftdi_respond_queue_work(ftdi, 0); - return; } static void ftdi_elan_respond_work(struct work_struct *work) diff --git a/drivers/usb/mon/mon_main.c b/drivers/usb/mon/mon_main.c index 812dc288bb8..10405119985 100644 --- a/drivers/usb/mon/mon_main.c +++ b/drivers/usb/mon/mon_main.c @@ -90,7 +90,6 @@ static void mon_bus_submit(struct mon_bus *mbus, struct urb *urb) r->rnf_submit(r->r_data, urb); } spin_unlock_irqrestore(&mbus->lock, flags); - return; } static void mon_submit(struct usb_bus *ubus, struct urb *urb) @@ -117,7 +116,6 @@ static void mon_bus_submit_error(struct mon_bus *mbus, struct urb *urb, int erro r->rnf_error(r->r_data, urb, error); } spin_unlock_irqrestore(&mbus->lock, flags); - return; } static void mon_submit_error(struct usb_bus *ubus, struct urb *urb, int error) diff --git a/drivers/usb/serial/Kconfig b/drivers/usb/serial/Kconfig index 95058109f9f..c2b29761fa9 100644 --- a/drivers/usb/serial/Kconfig +++ b/drivers/usb/serial/Kconfig @@ -176,7 +176,7 @@ config USB_SERIAL_VISOR help Say Y here if you want to connect to your HandSpring Visor, Palm m500 or m505 through its USB docking station. See - <http://usbvisor.sourceforge.net/> for more information on using this + <http://usbvisor.sourceforge.net/index.php3> for more information on using this driver. To compile this driver as a module, choose M here: the @@ -289,7 +289,7 @@ config USB_SERIAL_KEYSPAN and was developed with their support. You must also include firmware to support your particular device(s). - See <http://misc.nu/hugh/keyspan.html> for more information. + See <http://blemings.org/hugh/keyspan.html> for more information. To compile this driver as a module, choose M here: the module will be called keyspan. diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c index f5d06746cc3..2edf238b00b 100644 --- a/drivers/usb/serial/cypress_m8.c +++ b/drivers/usb/serial/cypress_m8.c @@ -1320,8 +1320,6 @@ continue_read: cypress_set_dead(port); } } - - return; } /* cypress_read_int_callback */ diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 37b57c785cc..89a9a584780 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -2108,7 +2108,6 @@ static void ftdi_set_termios(struct tty_struct *tty, } } - return; } static int ftdi_tiocmget(struct tty_struct *tty, struct file *file) diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h index cf1aea1b9ee..7dfe02f1fb6 100644 --- a/drivers/usb/serial/ftdi_sio_ids.h +++ b/drivers/usb/serial/ftdi_sio_ids.h @@ -46,7 +46,7 @@ #define FTDI_USINT_RS232_PID 0xb812 /* Navigator RS232 and CONFIG lines */ /* OOCDlink by Joern Kaipf <joernk@web.de> - * (http://www.joernonline.de/dw/doku.php?id=start&idx=projects:oocdlink) */ + * (http://www.joernonline.de/) */ #define FTDI_OOCDLINK_PID 0xbaf8 /* Amontec JTAGkey */ /* Luminary Micro Stellaris Boards, VID = FTDI_VID */ @@ -336,7 +336,7 @@ #define FTDI_PIEGROUP_PID 0xF208 /* Product Id */ /* ACT Solutions HomePro ZWave interface - (http://www.act-solutions.com/HomePro.htm) */ + (http://www.act-solutions.com/HomePro-Product-Matrix.html) */ #define FTDI_ACTZWAVE_PID 0xF2D0 /* @@ -367,7 +367,7 @@ #define FTDI_SUUNTO_SPORTS_PID 0xF680 /* Suunto Sports instrument */ /* USB-UIRT - An infrared receiver and transmitter using the 8U232AM chip */ -/* http://home.earthlink.net/~jrhees/USBUIRT/index.htm */ +/* http://www.usbuirt.com/ */ #define FTDI_USB_UIRT_PID 0xF850 /* Product Id */ /* CCS Inc. ICDU/ICDU40 product ID - @@ -396,7 +396,7 @@ */ #define FTDI_HE_TIRA1_PID 0xFA78 /* Tira-1 IR transceiver */ -/* Inside Accesso contactless reader (http://www.insidefr.com) */ +/* Inside Accesso contactless reader (http://www.insidecontactless.com/) */ #define INSIDE_ACCESSO 0xFAD0 /* @@ -635,14 +635,14 @@ /* * JETI SPECTROMETER SPECBOS 1201 - * http://www.jeti.com/products/sys/scb/scb1201.php + * http://www.jeti.com/cms/index.php/instruments/other-instruments/specbos-2101 */ #define JETI_VID 0x0c6c #define JETI_SPC1201_PID 0x04b2 /* * FTDI USB UART chips used in construction projects from the - * Elektor Electronics magazine (http://elektor-electronics.co.uk) + * Elektor Electronics magazine (http://www.elektor.com/) */ #define ELEKTOR_VID 0x0C7D #define ELEKTOR_FT323R_PID 0x0005 /* RFID-Reader, issue 09-2006 */ diff --git a/drivers/usb/serial/garmin_gps.c b/drivers/usb/serial/garmin_gps.c index a42b29a695b..26710b18991 100644 --- a/drivers/usb/serial/garmin_gps.c +++ b/drivers/usb/serial/garmin_gps.c @@ -1264,7 +1264,6 @@ static void garmin_read_bulk_callback(struct urb *urb) garmin_data_p->flags &= ~FLAGS_BULK_IN_ACTIVE; spin_unlock_irqrestore(&garmin_data_p->lock, flags); } - return; } diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c index a0ab78ada25..cd769ef24f8 100644 --- a/drivers/usb/serial/io_edgeport.c +++ b/drivers/usb/serial/io_edgeport.c @@ -1467,8 +1467,6 @@ static void edge_throttle(struct tty_struct *tty) if (status != 0) return; } - - return; } @@ -1775,8 +1773,6 @@ static void edge_break(struct tty_struct *tty, int break_state) dbg("%s - error sending break set/clear command.", __func__); } - - return; } @@ -2047,7 +2043,6 @@ static void process_rcvd_status(struct edgeport_serial *edge_serial, dbg("%s - Unrecognized IOSP status code %u", __func__, code); break; } - return; } @@ -2100,8 +2095,6 @@ static void handle_new_msr(struct edgeport_port *edge_port, __u8 newMsr) /* Save the new modem status */ edge_port->shadowMSR = newMsr & 0xf0; - - return; } @@ -2148,8 +2141,6 @@ static void handle_new_lsr(struct edgeport_port *edge_port, __u8 lsrData, icount->parity++; if (newLsr & LSR_FRM_ERR) icount->frame++; - - return; } @@ -2725,7 +2716,6 @@ static void change_port_settings(struct tty_struct *tty, baud = tty_termios_baud_rate(old_termios); tty_encode_baud_rate(tty, baud, baud); } - return; } @@ -2927,7 +2917,6 @@ static void load_application_firmware(struct edgeport_serial *edge_serial) 0x40, 0x4000, 0x0001, NULL, 0, 3000); release_firmware(fw); - return; } diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c index 4dad27a0f22..22506b095c4 100644 --- a/drivers/usb/serial/io_ti.c +++ b/drivers/usb/serial/io_ti.c @@ -1571,8 +1571,6 @@ static void handle_new_msr(struct edgeport_port *edge_port, __u8 msr) } } tty_kref_put(tty); - - return; } static void handle_new_lsr(struct edgeport_port *edge_port, int lsr_data, @@ -2424,7 +2422,6 @@ static void change_port_settings(struct tty_struct *tty, dbg("%s - error %d when trying to write config to device", __func__, status); kfree(config); - return; } static void edge_set_termios(struct tty_struct *tty, @@ -2445,7 +2442,6 @@ static void edge_set_termios(struct tty_struct *tty, return; /* change the port settings to the new ones specified */ change_port_settings(tty, edge_port, old_termios); - return; } static int edge_tiocmset(struct tty_struct *tty, struct file *file, diff --git a/drivers/usb/serial/iuu_phoenix.c b/drivers/usb/serial/iuu_phoenix.c index efc72113216..12ed594f5f8 100644 --- a/drivers/usb/serial/iuu_phoenix.c +++ b/drivers/usb/serial/iuu_phoenix.c @@ -807,7 +807,6 @@ static void read_rxcmd_callback(struct urb *urb) iuu_uart_read_callback, port); result = usb_submit_urb(port->read_urb, GFP_ATOMIC); dbg("%s - submit result = %d", __func__, result); - return; } static int iuu_uart_on(struct usb_serial_port *port) diff --git a/drivers/usb/serial/keyspan.c b/drivers/usb/serial/keyspan.c index 297163c3c61..0791778a66f 100644 --- a/drivers/usb/serial/keyspan.c +++ b/drivers/usb/serial/keyspan.c @@ -9,7 +9,7 @@ the Free Software Foundation; either version 2 of the License, or (at your option) any later version. - See http://misc.nu/hugh/keyspan.html for more information. + See http://blemings.org/hugh/keyspan.html for more information. Code in this driver inspired by and in a number of places taken from Brian Warner's original Keyspan-PDA driver. diff --git a/drivers/usb/serial/keyspan.h b/drivers/usb/serial/keyspan.h index bf3297ddd18..2d8baf6ac47 100644 --- a/drivers/usb/serial/keyspan.h +++ b/drivers/usb/serial/keyspan.h @@ -9,7 +9,7 @@ the Free Software Foundation; either version 2 of the License, or (at your option) any later version. - See http://misc.nu/hugh/keyspan.html for more information. + See http://blemings.org/hugh/keyspan.html for more information. Code in this driver inspired by and in a number of places taken from Brian Warner's original Keyspan-PDA driver. diff --git a/drivers/usb/serial/keyspan_pda.c b/drivers/usb/serial/keyspan_pda.c index 185fe9a7d4e..a10dd5676cc 100644 --- a/drivers/usb/serial/keyspan_pda.c +++ b/drivers/usb/serial/keyspan_pda.c @@ -292,7 +292,6 @@ static void keyspan_pda_rx_unthrottle(struct tty_struct *tty) port->interrupt_in_urb->dev = port->serial->dev; if (usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL)) dbg(" usb_submit_urb(read urb) failed"); - return; } diff --git a/drivers/usb/serial/mct_u232.h b/drivers/usb/serial/mct_u232.h index 3a3f5e6b8f9..d325bb8cb58 100644 --- a/drivers/usb/serial/mct_u232.h +++ b/drivers/usb/serial/mct_u232.h @@ -10,10 +10,9 @@ * * This driver is for the device MCT USB-RS232 Converter (25 pin, Model No. * U232-P25) from Magic Control Technology Corp. (there is also a 9 pin - * Model No. U232-P9). See http://www.mct.com.tw/p_u232.html for further - * information. The properties of this device are listed at the end of this - * file. This device is available from various distributors. I know Hana, - * http://www.hana.de and D-Link, http://www.dlink.com/products/usb/dsbs25. + * Model No. U232-P9). See http://www.mct.com.tw/products/product_us232.html + * for further information. The properties of this device are listed at the end + * of this file. This device was used in the Dlink DSB-S25. * * All of the information about the device was acquired by using SniffUSB * on Windows98. The technical details of the reverse engineering are @@ -458,7 +457,7 @@ static int mct_u232_calculate_baud_rate(struct usb_serial *serial, * embedded UART. Exhaustive documentation for these is available at: * * http://www.semiconductors.philips.com/pip/p87c52ubaa - * http://www.semiconductors.philips.com/pip/pdiusbd12 + * http://www.nxp.com/acrobat_download/various/PDIUSBD12_PROGRAMMING_GUIDE.pdf * * Thanks to Julian Highfield for the pointer to the Philips database. * diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c index fd0b6414f45..7d3bc9a3e2b 100644 --- a/drivers/usb/serial/mos7720.c +++ b/drivers/usb/serial/mos7720.c @@ -827,7 +827,6 @@ exit: dev_err(&urb->dev->dev, "%s - Error %d submitting control urb\n", __func__, result); - return; } /* @@ -907,7 +906,6 @@ exit: dev_err(&urb->dev->dev, "%s - Error %d submitting control urb\n", __func__, result); - return; } /* @@ -1227,8 +1225,6 @@ static void mos7720_break(struct tty_struct *tty, int break_state) mos7720_port->shadowLCR = data; write_mos_reg(serial, port->number - port->serial->minor, LCR, mos7720_port->shadowLCR); - - return; } /* @@ -1746,7 +1742,6 @@ static void change_port_settings(struct tty_struct *tty, dbg("usb_submit_urb(read bulk) failed, status = %d", status); } - return; } /* @@ -1803,7 +1798,6 @@ static void mos7720_set_termios(struct tty_struct *tty, dbg("usb_submit_urb(read bulk) failed, status = %d", status); } - return; } /* diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c index 93dad5853cd..5627993f9e4 100644 --- a/drivers/usb/serial/mos7840.c +++ b/drivers/usb/serial/mos7840.c @@ -1367,8 +1367,6 @@ static void mos7840_break(struct tty_struct *tty, int break_state) mos7840_port->shadowLCR); mos7840_set_uart_reg(port, LINE_CONTROL_REGISTER, mos7840_port->shadowLCR); - - return; } /***************************************************************************** @@ -1599,8 +1597,6 @@ static void mos7840_throttle(struct tty_struct *tty) if (status < 0) return; } - - return; } /***************************************************************************** @@ -2075,8 +2071,6 @@ static void mos7840_change_port_settings(struct tty_struct *tty, mos7840_port->delta_msr_cond = 1; dbg("mos7840_change_port_settings mos7840_port->shadowLCR is End %x", mos7840_port->shadowLCR); - - return; } /***************************************************************************** @@ -2145,7 +2139,6 @@ static void mos7840_set_termios(struct tty_struct *tty, mos7840_port->read_urb_busy = false; } } - return; } /***************************************************************************** diff --git a/drivers/usb/serial/omninet.c b/drivers/usb/serial/omninet.c index 89c724c0ac0..60f38d5e64f 100644 --- a/drivers/usb/serial/omninet.c +++ b/drivers/usb/serial/omninet.c @@ -246,8 +246,6 @@ static void omninet_read_bulk_callback(struct urb *urb) dev_err(&port->dev, "%s - failed resubmitting read urb, error %d\n", __func__, result); - - return; } static int omninet_write(struct tty_struct *tty, struct usb_serial_port *port, diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c index d47b56e9e8c..7481ff8a49e 100644 --- a/drivers/usb/serial/sierra.c +++ b/drivers/usb/serial/sierra.c @@ -620,8 +620,6 @@ static void sierra_indat_callback(struct urb *urb) dev_err(&port->dev, "resubmit read urb failed." "(%d)\n", err); } - - return; } static void sierra_instat_callback(struct urb *urb) diff --git a/drivers/usb/serial/spcp8x5.c b/drivers/usb/serial/spcp8x5.c index 329d311a35d..765aa983bf5 100644 --- a/drivers/usb/serial/spcp8x5.c +++ b/drivers/usb/serial/spcp8x5.c @@ -441,7 +441,6 @@ static void spcp8x5_set_termios(struct tty_struct *tty, spcp8x5_set_workMode(serial->dev, 0x000a, SET_WORKING_MODE_U2C, priv->type); } - return; } /* open the serial port. do some usb system call. set termios and get the line diff --git a/drivers/usb/serial/usb_wwan.c b/drivers/usb/serial/usb_wwan.c index 0c70b4a621b..fbc94679780 100644 --- a/drivers/usb/serial/usb_wwan.c +++ b/drivers/usb/serial/usb_wwan.c @@ -234,7 +234,6 @@ static void usb_wwan_indat_callback(struct urb *urb) } } - return; } static void usb_wwan_outdat_callback(struct urb *urb) diff --git a/drivers/usb/serial/whiteheat.c b/drivers/usb/serial/whiteheat.c index 12ed8209ca7..3f9ac88d588 100644 --- a/drivers/usb/serial/whiteheat.c +++ b/drivers/usb/serial/whiteheat.c @@ -655,8 +655,6 @@ static void whiteheat_release(struct usb_serial *serial) } kfree(info); } - - return; } static int whiteheat_open(struct tty_struct *tty, struct usb_serial_port *port) @@ -955,8 +953,6 @@ static void whiteheat_throttle(struct tty_struct *tty) spin_lock_irq(&info->lock); info->flags |= THROTTLED; spin_unlock_irq(&info->lock); - - return; } @@ -975,8 +971,6 @@ static void whiteheat_unthrottle(struct tty_struct *tty) if (actually_throttled) rx_data_softint(&info->rx_work); - - return; } diff --git a/drivers/usb/storage/Kconfig b/drivers/usb/storage/Kconfig index f2767cf2e22..49a489e0371 100644 --- a/drivers/usb/storage/Kconfig +++ b/drivers/usb/storage/Kconfig @@ -36,7 +36,7 @@ config USB_STORAGE_DATAFAB depends on USB_STORAGE help Support for certain Datafab CompactFlash readers. - Datafab has a web page at <http://www.datafabusa.com/>. + Datafab has a web page at <http://www.datafab.com/>. If this driver is compiled as a module, it will be named ums-datafab. diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig index 8b31fdfefc9..dc06ff13455 100644 --- a/drivers/video/Kconfig +++ b/drivers/video/Kconfig @@ -49,7 +49,7 @@ menuconfig FB You need an utility program called fbset to make full use of frame buffer devices. Please read <file:Documentation/fb/framebuffer.txt> and the Framebuffer-HOWTO at - <http://www.munted.org.uk/programming/Framebuffer-HOWTO-1.2.html> for more + <http://www.munted.org.uk/programming/Framebuffer-HOWTO-1.3.html> for more information. Say Y here and to the driver for your graphics board below if you @@ -955,7 +955,7 @@ config FB_EPSON1355 Build in support for the SED1355 Epson Research Embedded RAMDAC LCD/CRT Controller (since redesignated as the S1D13505) as a framebuffer. Product specs at - <http://www.erd.epson.com/vdc/html/products.htm>. + <http://vdc.epson.com/>. config FB_S1D13XXX tristate "Epson S1D13XXX framebuffer support" @@ -966,7 +966,7 @@ config FB_S1D13XXX help Support for S1D13XXX framebuffer device family (currently only working with S1D13806). Product specs at - <http://www.erd.epson.com/vdc/html/legacy_13xxx.htm> + <http://vdc.epson.com/> config FB_ATMEL tristate "AT91/AT32 LCD Controller support" @@ -1323,7 +1323,7 @@ config FB_RADEON don't need to choose this to run the Radeon in plain VGA mode. There is a product page at - http://apps.ati.com/ATIcompare/ + http://products.amd.com/en-us/GraphicCardResult.aspx config FB_RADEON_I2C bool "DDC/I2C for ATI Radeon support" @@ -1395,7 +1395,7 @@ config FB_ATY_CT Say Y here to support use of ATI's 64-bit Rage boards (or other boards based on the Mach64 CT, VT, GT, and LT chipsets) as a framebuffer device. The ATI product support page for these boards - is at <http://support.ati.com/products/pc/mach64/>. + is at <http://support.ati.com/products/pc/mach64/mach64.html>. config FB_ATY_GENERIC_LCD bool "Mach64 generic LCD support (EXPERIMENTAL)" diff --git a/drivers/video/arcfb.c b/drivers/video/arcfb.c index f3d7440f007..3ec4923c2d8 100644 --- a/drivers/video/arcfb.c +++ b/drivers/video/arcfb.c @@ -2,7 +2,6 @@ * linux/drivers/video/arcfb.c -- FB driver for Arc monochrome LCD board * * Copyright (C) 2005, Jaya Kumar <jayalk@intworks.biz> - * http://www.intworks.biz/arclcd * * This file is subject to the terms and conditions of the GNU General Public * License. See the file COPYING in the main directory of this archive for diff --git a/drivers/video/bf54x-lq043fb.c b/drivers/video/bf54x-lq043fb.c index b020ba7f1cf..e7d0f525041 100644 --- a/drivers/video/bf54x-lq043fb.c +++ b/drivers/video/bf54x-lq043fb.c @@ -241,12 +241,12 @@ static int request_ports(struct bfin_bf54xfb_info *fbi) u16 disp = fbi->mach_info->disp; if (gpio_request(disp, DRIVER_NAME)) { - printk(KERN_ERR "Requesting GPIO %d faild\n", disp); + printk(KERN_ERR "Requesting GPIO %d failed\n", disp); return -EFAULT; } if (peripheral_request_list(eppi_req_18, DRIVER_NAME)) { - printk(KERN_ERR "Requesting Peripherals faild\n"); + printk(KERN_ERR "Requesting Peripherals failed\n"); gpio_free(disp); return -EFAULT; } @@ -256,7 +256,7 @@ static int request_ports(struct bfin_bf54xfb_info *fbi) u16 eppi_req_24[] = EPPI0_24; if (peripheral_request_list(eppi_req_24, DRIVER_NAME)) { - printk(KERN_ERR "Requesting Peripherals faild\n"); + printk(KERN_ERR "Requesting Peripherals failed\n"); peripheral_free_list(eppi_req_18); gpio_free(disp); return -EFAULT; diff --git a/drivers/video/bfin-t350mcqb-fb.c b/drivers/video/bfin-t350mcqb-fb.c index 7a50272eaab..3cf77676947 100644 --- a/drivers/video/bfin-t350mcqb-fb.c +++ b/drivers/video/bfin-t350mcqb-fb.c @@ -192,7 +192,7 @@ static int bfin_t350mcqb_request_ports(int action) { if (action) { if (peripheral_request_list(ppi0_req_8, DRIVER_NAME)) { - printk(KERN_ERR "Requesting Peripherals faild\n"); + printk(KERN_ERR "Requesting Peripherals failed\n"); return -EFAULT; } } else diff --git a/drivers/video/epson1355fb.c b/drivers/video/epson1355fb.c index db9713b49ce..a268cbf1cbe 100644 --- a/drivers/video/epson1355fb.c +++ b/drivers/video/epson1355fb.c @@ -4,7 +4,7 @@ * Epson Research S1D13505 Embedded RAMDAC LCD/CRT Controller * (previously known as SED1355) * - * Cf. http://www.erd.epson.com/vdc/html/S1D13505.html + * Cf. http://vdc.epson.com/ * * * Copyright (C) Hewlett-Packard Company. All rights reserved. diff --git a/drivers/video/fbcvt.c b/drivers/video/fbcvt.c index 7293eaccd81..7cb715dfc0e 100644 --- a/drivers/video/fbcvt.c +++ b/drivers/video/fbcvt.c @@ -5,7 +5,7 @@ * * Based from the VESA(TM) Coordinated Video Timing Generator by * Graham Loveridge April 9, 2003 available at - * http://www.vesa.org/public/CVT/CVTd6r1.xls + * http://www.elo.utfsm.cl/~elo212/docs/CVTd6r1.xls * * This file is subject to the terms and conditions of the GNU General Public * License. See the file COPYING in the main directory of this archive diff --git a/drivers/video/metronomefb.c b/drivers/video/metronomefb.c index 9b3d6e4584c..63ed3b72b01 100644 --- a/drivers/video/metronomefb.c +++ b/drivers/video/metronomefb.c @@ -10,7 +10,7 @@ * Layout is based on skeletonfb.c by James Simmons and Geert Uytterhoeven. * * This work was made possible by help and equipment support from E-Ink - * Corporation. http://support.eink.com/community + * Corporation. http://www.eink.com/ * * This driver is written to be used with the Metronome display controller. * It is intended to be architecture independent. A board specific driver diff --git a/drivers/video/vesafb.c b/drivers/video/vesafb.c index 090aa1a9be6..6a069d04791 100644 --- a/drivers/video/vesafb.c +++ b/drivers/video/vesafb.c @@ -253,7 +253,7 @@ static int __init vesafb_probe(struct platform_device *dev) size_vmode = vesafb_defined.yres * vesafb_fix.line_length; /* size_total -- all video memory we have. Used for mtrr - * entries, ressource allocation and bounds + * entries, resource allocation and bounds * checking. */ size_total = screen_info.lfb_size * 65536; if (vram_total) diff --git a/firmware/keyspan_pda/keyspan_pda.S b/firmware/keyspan_pda/keyspan_pda.S index 418fe69aa5e..f3acc197a5e 100644 --- a/firmware/keyspan_pda/keyspan_pda.S +++ b/firmware/keyspan_pda/keyspan_pda.S @@ -74,7 +74,7 @@ * recognizes the new device ID and glues it to the real serial driver code. * * USEFUL DOCS: - * EzUSB Technical Reference Manual: <http://www.anchorchips.com> + * EzUSB Technical Reference Manual: <http://www.cypress.com/> * 8051 manuals: everywhere, but try www.dalsemi.com because the EzUSB is * basically the Dallas enhanced 8051 code. Remember that the EzUSB IO ports * use totally different registers! diff --git a/firmware/keyspan_pda/xircom_pgs.S b/firmware/keyspan_pda/xircom_pgs.S index 05d99dd6377..0b79bbf0ae1 100644 --- a/firmware/keyspan_pda/xircom_pgs.S +++ b/firmware/keyspan_pda/xircom_pgs.S @@ -74,7 +74,7 @@ * recognizes the new device ID and glues it to the real serial driver code. * * USEFUL DOCS: - * EzUSB Technical Reference Manual: <http://www.anchorchips.com> + * EzUSB Technical Reference Manual: <http://www.cypress.com/> * 8051 manuals: everywhere, but try www.dalsemi.com because the EzUSB is * basically the Dallas enhanced 8051 code. Remember that the EzUSB IO ports * use totally different registers! diff --git a/fs/ecryptfs/ecryptfs_kernel.h b/fs/ecryptfs/ecryptfs_kernel.h index 0032a9f5a3a..40186b95942 100644 --- a/fs/ecryptfs/ecryptfs_kernel.h +++ b/fs/ecryptfs/ecryptfs_kernel.h @@ -477,7 +477,7 @@ ecryptfs_lower_header_size(struct ecryptfs_crypt_stat *crypt_stat) static inline struct ecryptfs_file_info * ecryptfs_file_to_private(struct file *file) { - return (struct ecryptfs_file_info *)file->private_data; + return file->private_data; } static inline void diff --git a/fs/exofs/inode.c b/fs/exofs/inode.c index 3eadd97324b..44602754f75 100644 --- a/fs/exofs/inode.c +++ b/fs/exofs/inode.c @@ -511,7 +511,7 @@ static int write_exec(struct page_collect *pcol) pcol_copy = kmalloc(sizeof(*pcol_copy), GFP_KERNEL); if (!pcol_copy) { - EXOFS_ERR("write_exec: Faild to kmalloc(pcol)\n"); + EXOFS_ERR("write_exec: Failed to kmalloc(pcol)\n"); ret = -ENOMEM; goto err; } @@ -527,7 +527,7 @@ static int write_exec(struct page_collect *pcol) ret = exofs_oi_write(oi, ios); if (unlikely(ret)) { - EXOFS_ERR("write_exec: exofs_oi_write() Faild\n"); + EXOFS_ERR("write_exec: exofs_oi_write() Failed\n"); goto err; } @@ -628,7 +628,7 @@ try_again: /* split the request, next loop will start again */ ret = write_exec(pcol); if (unlikely(ret)) { - EXOFS_DBGMSG("write_exec faild => %d", ret); + EXOFS_DBGMSG("write_exec failed => %d", ret); goto fail; } @@ -719,7 +719,7 @@ int exofs_write_begin(struct file *file, struct address_space *mapping, ret = simple_write_begin(file, mapping, pos, len, flags, pagep, fsdata); if (ret) { - EXOFS_DBGMSG("simple_write_begin faild\n"); + EXOFS_DBGMSG("simple_write_begin failed\n"); goto out; } @@ -732,7 +732,7 @@ int exofs_write_begin(struct file *file, struct address_space *mapping, if (ret) { /*SetPageError was done by _readpage. Is it ok?*/ unlock_page(page); - EXOFS_DBGMSG("__readpage_filler faild\n"); + EXOFS_DBGMSG("__readpage_filler failed\n"); } } out: @@ -1095,7 +1095,7 @@ static void create_done(struct exofs_io_state *ios, void *p) atomic_dec(&sbi->s_curr_pending); if (unlikely(ret)) { - EXOFS_ERR("object=0x%llx creation faild in pid=0x%llx", + EXOFS_ERR("object=0x%llx creation failed in pid=0x%llx", _LLU(exofs_oi_objno(oi)), _LLU(sbi->layout.s_pid)); /*TODO: When FS is corrupted creation can fail, object already * exist. Get rid of this asynchronous creation, if exist @@ -1215,7 +1215,7 @@ static int exofs_update_inode(struct inode *inode, int do_sync) args = kzalloc(sizeof(*args), GFP_KERNEL); if (!args) { - EXOFS_DBGMSG("Faild kzalloc of args\n"); + EXOFS_DBGMSG("Failed kzalloc of args\n"); return -ENOMEM; } diff --git a/fs/exofs/ios.c b/fs/exofs/ios.c index 6550bf70e41..f74a2ec027a 100644 --- a/fs/exofs/ios.c +++ b/fs/exofs/ios.c @@ -55,7 +55,7 @@ int exofs_read_kern(struct osd_dev *od, u8 *cred, struct osd_obj_id *obj, ret = osd_finalize_request(or, 0, cred, NULL); if (unlikely(ret)) { - EXOFS_DBGMSG("Faild to osd_finalize_request() => %d\n", ret); + EXOFS_DBGMSG("Failed to osd_finalize_request() => %d\n", ret); goto out; } @@ -79,7 +79,7 @@ int exofs_get_io_state(struct exofs_layout *layout, */ ios = kzalloc(exofs_io_state_size(layout->s_numdevs), GFP_KERNEL); if (unlikely(!ios)) { - EXOFS_DBGMSG("Faild kzalloc bytes=%d\n", + EXOFS_DBGMSG("Failed kzalloc bytes=%d\n", exofs_io_state_size(layout->s_numdevs)); *pios = NULL; return -ENOMEM; @@ -172,7 +172,7 @@ static int exofs_io_execute(struct exofs_io_state *ios) ret = osd_finalize_request(or, 0, ios->cred, NULL); if (unlikely(ret)) { - EXOFS_DBGMSG("Faild to osd_finalize_request() => %d\n", + EXOFS_DBGMSG("Failed to osd_finalize_request() => %d\n", ret); return ret; } @@ -361,7 +361,7 @@ static int _add_stripe_unit(struct exofs_io_state *ios, unsigned *cur_pg, per_dev->bio = bio_kmalloc(GFP_KERNEL, bio_size); if (unlikely(!per_dev->bio)) { - EXOFS_DBGMSG("Faild to allocate BIO size=%u\n", + EXOFS_DBGMSG("Failed to allocate BIO size=%u\n", bio_size); return -ENOMEM; } @@ -564,7 +564,7 @@ static int _sbi_write_mirror(struct exofs_io_state *ios, int cur_comp) master_dev->bio->bi_max_vecs); if (unlikely(!bio)) { EXOFS_DBGMSG( - "Faild to allocate BIO size=%u\n", + "Failed to allocate BIO size=%u\n", master_dev->bio->bi_max_vecs); ret = -ENOMEM; goto out; diff --git a/fs/ext2/inode.c b/fs/ext2/inode.c index 940c9616886..533699c1604 100644 --- a/fs/ext2/inode.c +++ b/fs/ext2/inode.c @@ -458,7 +458,7 @@ failed_out: * the same format as ext2_get_branch() would do. We are calling it after * we had read the existing part of chain and partial points to the last * triple of that (one with zero ->key). Upon the exit we have the same - * picture as after the successful ext2_get_block(), excpet that in one + * picture as after the successful ext2_get_block(), except that in one * place chain is disconnected - *branch->p is still zero (we did not * set the last link), but branch->key contains the number that should * be placed into *branch->p to fill that gap. @@ -662,7 +662,7 @@ static int ext2_get_blocks(struct inode *inode, mutex_lock(&ei->truncate_mutex); /* * If the indirect block is missing while we are reading - * the chain(ext3_get_branch() returns -EAGAIN err), or + * the chain(ext2_get_branch() returns -EAGAIN err), or * if the chain has been changed after we grab the semaphore, * (either because another process truncated this branch, or * another get_block allocated this branch) re-grab the chain to see if diff --git a/fs/hostfs/hostfs.h b/fs/hostfs/hostfs.h index 6bbd75c5589..7c232c1487e 100644 --- a/fs/hostfs/hostfs.h +++ b/fs/hostfs/hostfs.h @@ -28,12 +28,7 @@ * #define ATTR_KILL_SUID 2048 * #define ATTR_KILL_SGID 4096 * - * and this is because they were added in 2.5 development in this patch: - * - * http://linux.bkbits.net:8080/linux-2.5/ - * cset@3caf4a12k4XgDzK7wyK-TGpSZ9u2Ww?nav=index.html - * |src/.|src/include|src/include/linux|related/include/linux/fs.h - * + * and this is because they were added in 2.5 development. * Actually, they are not needed by most ->setattr() methods - they are set by * callers of notify_change() to notify that the setuid/setgid bits must be * dropped. diff --git a/fs/jfs/jfs_logmgr.c b/fs/jfs/jfs_logmgr.c index c51af2a1451..e1b8493b9aa 100644 --- a/fs/jfs/jfs_logmgr.c +++ b/fs/jfs/jfs_logmgr.c @@ -1010,15 +1010,13 @@ static int lmLogSync(struct jfs_log * log, int hard_sync) * option 2 - shutdown file systems * associated with log ? * option 3 - extend log ? - */ - /* * option 4 - second chance * * mark log wrapped, and continue. * when all active transactions are completed, - * mark log vaild for recovery. + * mark log valid for recovery. * if crashed during invalid state, log state - * implies invald log, forcing fsck(). + * implies invalid log, forcing fsck(). */ /* mark log state log wrap in log superblock */ /* log->state = LOGWRAP; */ diff --git a/fs/jfs/jfs_mount.c b/fs/jfs/jfs_mount.c index 7b698f2ec45..9895595fd2f 100644 --- a/fs/jfs/jfs_mount.c +++ b/fs/jfs/jfs_mount.c @@ -97,7 +97,7 @@ int jfs_mount(struct super_block *sb) ipaimap = diReadSpecial(sb, AGGREGATE_I, 0); if (ipaimap == NULL) { - jfs_err("jfs_mount: Faild to read AGGREGATE_I"); + jfs_err("jfs_mount: Failed to read AGGREGATE_I"); rc = -EIO; goto errout20; } @@ -148,7 +148,7 @@ int jfs_mount(struct super_block *sb) if ((sbi->mntflag & JFS_BAD_SAIT) == 0) { ipaimap2 = diReadSpecial(sb, AGGREGATE_I, 1); if (!ipaimap2) { - jfs_err("jfs_mount: Faild to read AGGREGATE_I"); + jfs_err("jfs_mount: Failed to read AGGREGATE_I"); rc = -EIO; goto errout35; } diff --git a/fs/ocfs2/cluster/tcp_internal.h b/fs/ocfs2/cluster/tcp_internal.h index 96fa7ebc530..15fdbdf9eb4 100644 --- a/fs/ocfs2/cluster/tcp_internal.h +++ b/fs/ocfs2/cluster/tcp_internal.h @@ -129,7 +129,7 @@ struct o2net_node { struct o2net_sock_container { struct kref sc_kref; - /* the next two are vaild for the life time of the sc */ + /* the next two are valid for the life time of the sc */ struct socket *sc_sock; struct o2nm_node *sc_node; diff --git a/fs/partitions/ldm.c b/fs/partitions/ldm.c index 5bf8a04b5d9..789c625c7aa 100644 --- a/fs/partitions/ldm.c +++ b/fs/partitions/ldm.c @@ -5,7 +5,7 @@ * Copyright (c) 2001-2007 Anton Altaparmakov * Copyright (C) 2001,2002 Jakob Kemi <jakob.kemi@telia.com> * - * Documentation is available at http://www.linux-ntfs.org/content/view/19/37/ + * Documentation is available at http://www.linux-ntfs.org/doku.php?id=downloads * * This program is free software; you can redistribute it and/or modify it under * the terms of the GNU General Public License as published by the Free Software diff --git a/fs/partitions/ldm.h b/fs/partitions/ldm.h index d1fb50b28d8..374242c0971 100644 --- a/fs/partitions/ldm.h +++ b/fs/partitions/ldm.h @@ -5,7 +5,7 @@ * Copyright (c) 2001-2007 Anton Altaparmakov * Copyright (C) 2001,2002 Jakob Kemi <jakob.kemi@telia.com> * - * Documentation is available at http://www.linux-ntfs.org/content/view/19/37/ + * Documentation is available at http://www.linux-ntfs.org/doku.php?id=downloads * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the Free diff --git a/fs/reiserfs/Kconfig b/fs/reiserfs/Kconfig index 513f431038f..7cd46666ba2 100644 --- a/fs/reiserfs/Kconfig +++ b/fs/reiserfs/Kconfig @@ -10,7 +10,8 @@ config REISERFS_FS In general, ReiserFS is as fast as ext2, but is very efficient with large directories and small files. Additional patches are needed - for NFS and quotas, please see <http://www.namesys.com/> for links. + for NFS and quotas, please see + <https://reiser4.wiki.kernel.org/index.php/Main_Page> for links. It is more easily extended to have features currently found in database and keyword search systems than block allocation based file @@ -18,7 +19,8 @@ config REISERFS_FS plugins consistent with our motto ``It takes more than a license to make source code open.'' - Read <http://www.namesys.com/> to learn more about reiserfs. + Read <https://reiser4.wiki.kernel.org/index.php/Main_Page> + to learn more about reiserfs. Sponsored by Threshold Networks, Emusic.com, and Bigstorage.com. diff --git a/fs/reiserfs/README b/fs/reiserfs/README index 14e8c9d460e..e2f7a264e3f 100644 --- a/fs/reiserfs/README +++ b/fs/reiserfs/README @@ -43,7 +43,7 @@ to address the fair crediting issue in the next GPL version.) [END LICENSING] Reiserfs is a file system based on balanced tree algorithms, which is -described at http://devlinux.com/namesys. +described at https://reiser4.wiki.kernel.org/index.php/Main_Page Stop reading here. Go there, then return. diff --git a/fs/seq_file.c b/fs/seq_file.c index e1f437be6c3..0e7cb1395a9 100644 --- a/fs/seq_file.c +++ b/fs/seq_file.c @@ -131,7 +131,7 @@ Eoverflow: */ ssize_t seq_read(struct file *file, char __user *buf, size_t size, loff_t *ppos) { - struct seq_file *m = (struct seq_file *)file->private_data; + struct seq_file *m = file->private_data; size_t copied = 0; loff_t pos; size_t n; @@ -280,7 +280,7 @@ EXPORT_SYMBOL(seq_read); */ loff_t seq_lseek(struct file *file, loff_t offset, int origin) { - struct seq_file *m = (struct seq_file *)file->private_data; + struct seq_file *m = file->private_data; loff_t retval = -EINVAL; mutex_lock(&m->lock); @@ -324,7 +324,7 @@ EXPORT_SYMBOL(seq_lseek); */ int seq_release(struct inode *inode, struct file *file) { - struct seq_file *m = (struct seq_file *)file->private_data; + struct seq_file *m = file->private_data; kfree(m->buf); kfree(m); return 0; diff --git a/include/crypto/gf128mul.h b/include/crypto/gf128mul.h index 4086b8ebfaf..da2530e34b2 100644 --- a/include/crypto/gf128mul.h +++ b/include/crypto/gf128mul.h @@ -54,8 +54,8 @@ /* Comment by Rik: * - * For some background on GF(2^128) see for example: http://- - * csrc.nist.gov/CryptoToolkit/modes/proposedmodes/gcm/gcm-revised-spec.pdf + * For some background on GF(2^128) see for example: + * http://csrc.nist.gov/groups/ST/toolkit/BCM/documents/proposedmodes/gcm/gcm-revised-spec.pdf * * The elements of GF(2^128) := GF(2)[X]/(X^128-X^7-X^2-X^1-1) can * be mapped to computer memory in a variety of ways. Let's examine diff --git a/include/linux/fdreg.h b/include/linux/fdreg.h index c2eeb63b72d..61ce6416900 100644 --- a/include/linux/fdreg.h +++ b/include/linux/fdreg.h @@ -89,7 +89,7 @@ /* the following commands are new in the 82078. They are not used in the * floppy driver, except the first three. These commands may be useful for apps * which use the FDRAWCMD interface. For doc, get the 82078 spec sheets at - * http://www-techdoc.intel.com/docs/periph/fd_contr/datasheets/ */ + * http://www.intel.com/design/archives/periphrl/docs/29046803.htm */ #define FD_PARTID 0x18 /* part id ("extended" version cmd) */ #define FD_SAVE 0x2e /* save fdc regs for later restore */ diff --git a/include/linux/idr.h b/include/linux/idr.h index cdb715e58e3..928ae712709 100644 --- a/include/linux/idr.h +++ b/include/linux/idr.h @@ -117,10 +117,13 @@ void idr_init(struct idr *idp); /* * IDA - IDR based id allocator, use when translation from id to * pointer isn't necessary. + * + * IDA_BITMAP_LONGS is calculated to be one less to accommodate + * ida_bitmap->nr_busy so that the whole struct fits in 128 bytes. */ #define IDA_CHUNK_SIZE 128 /* 128 bytes per chunk */ -#define IDA_BITMAP_LONGS (128 / sizeof(long) - 1) -#define IDA_BITMAP_BITS (IDA_BITMAP_LONGS * sizeof(long) * 8) +#define IDA_BITMAP_LONGS (IDA_CHUNK_SIZE / sizeof(long) - 1) +#define IDA_BITMAP_BITS (IDA_BITMAP_LONGS * sizeof(long) * 8) struct ida_bitmap { long nr_busy; diff --git a/include/linux/if_infiniband.h b/include/linux/if_infiniband.h index 3e659ec7dfd..7d958475d4a 100644 --- a/include/linux/if_infiniband.h +++ b/include/linux/if_infiniband.h @@ -5,7 +5,7 @@ * <http://www.fsf.org/copyleft/gpl.html>, or the OpenIB.org BSD * license, available in the LICENSE.TXT file accompanying this * software. These details are also available at - * <http://openib.org/license.html>. + * <http://www.openfabrics.org/software_license.htm>. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF diff --git a/include/linux/jhash.h b/include/linux/jhash.h index 2a2f99fbcb1..ced1159fa4f 100644 --- a/include/linux/jhash.h +++ b/include/linux/jhash.h @@ -116,7 +116,7 @@ static inline u32 jhash2(const u32 *k, u32 length, u32 initval) /* A special ultra-optimized versions that knows they are hashing exactly * 3, 2 or 1 word(s). * - * NOTE: In partilar the "c += length; __jhash_mix(a,b,c);" normally + * NOTE: In particular the "c += length; __jhash_mix(a,b,c);" normally * done at the end is not done here. */ static inline u32 jhash_3words(u32 a, u32 b, u32 c, u32 initval) diff --git a/include/linux/n_r3964.h b/include/linux/n_r3964.h index de24af79ebd..54b8e0d8d91 100644 --- a/include/linux/n_r3964.h +++ b/include/linux/n_r3964.h @@ -4,7 +4,6 @@ * Copyright by * Philips Automation Projects * Kassel (Germany) - * http://www.pap-philips.de * ----------------------------------------------------------- * This software may be used and distributed according to the terms of * the GNU General Public License, incorporated herein by reference. diff --git a/include/video/vga.h b/include/video/vga.h index b49a5120ca2..2b8691f7d25 100644 --- a/include/video/vga.h +++ b/include/video/vga.h @@ -5,7 +5,7 @@ * * Copyright history from vga16fb.c: * Copyright 1999 Ben Pfaff and Petr Vandrovec - * Based on VGA info at http://www.goodnet.com/~tinara/FreeVGA/home.htm + * Based on VGA info at http://www.osdever.net/FreeVGA/home.htm * Based on VESA framebuffer (c) 1998 Gerd Knorr * * This file is subject to the terms and conditions of the GNU General diff --git a/init/Kconfig b/init/Kconfig index fdfd97efe0e..3ae8ffe738e 100644 --- a/init/Kconfig +++ b/init/Kconfig @@ -186,7 +186,7 @@ config KERNEL_LZO depends on HAVE_KERNEL_LZO help Its compression ratio is the poorest among the 4. The kernel - size is about about 10% bigger than gzip; however its speed + size is about 10% bigger than gzip; however its speed (both compression and decompression) is the fastest. endchoice diff --git a/kernel/pm_qos_params.c b/kernel/pm_qos_params.c index a96b850ba08..c7a8f453919 100644 --- a/kernel/pm_qos_params.c +++ b/kernel/pm_qos_params.c @@ -399,7 +399,7 @@ static ssize_t pm_qos_power_write(struct file *filp, const char __user *buf, } else return -EINVAL; - pm_qos_req = (struct pm_qos_request_list *)filp->private_data; + pm_qos_req = filp->private_data; pm_qos_update_request(pm_qos_req, value); return count; diff --git a/kernel/trace/trace_kprobe.c b/kernel/trace/trace_kprobe.c index 544301d29de..b8d2852baa4 100644 --- a/kernel/trace/trace_kprobe.c +++ b/kernel/trace/trace_kprobe.c @@ -648,7 +648,7 @@ static int register_trace_probe(struct trace_probe *tp) } ret = register_probe_event(tp); if (ret) { - pr_warning("Faild to register probe event(%d)\n", ret); + pr_warning("Failed to register probe event(%d)\n", ret); goto end; } diff --git a/lib/idr.c b/lib/idr.c index 7f1a4f0acf5..5e0966be0f7 100644 --- a/lib/idr.c +++ b/lib/idr.c @@ -284,7 +284,7 @@ static int idr_get_new_above_int(struct idr *idp, void *ptr, int starting_id) * idr_get_new_above - allocate new idr entry above or equal to a start id * @idp: idr handle * @ptr: pointer you want associated with the id - * @start_id: id to start search at + * @starting_id: id to start search at * @id: pointer to the allocated handle * * This is the allocate id function. It should be called with any @@ -479,7 +479,7 @@ EXPORT_SYMBOL(idr_remove_all); /** * idr_destroy - release all cached layers within an idr tree - * idp: idr handle + * @idp: idr handle */ void idr_destroy(struct idr *idp) { @@ -586,10 +586,11 @@ EXPORT_SYMBOL(idr_for_each); /** * idr_get_next - lookup next object of id to given id. * @idp: idr handle - * @id: pointer to lookup key + * @nextidp: pointer to lookup key * * Returns pointer to registered object with id, which is next number to - * given id. + * given id. After being looked up, *@nextidp will be updated for the next + * iteration. */ void *idr_get_next(struct idr *idp, int *nextidp) @@ -758,7 +759,7 @@ EXPORT_SYMBOL(ida_pre_get); /** * ida_get_new_above - allocate new ID above or equal to a start id * @ida: ida handle - * @staring_id: id to start search at + * @starting_id: id to start search at * @p_id: pointer to the allocated handle * * Allocate new ID above or equal to @ida. It should be called with @@ -912,7 +913,7 @@ EXPORT_SYMBOL(ida_remove); /** * ida_destroy - release all cached layers within an ida tree - * ida: ida handle + * @ida: ida handle */ void ida_destroy(struct ida *ida) { diff --git a/mm/percpu.c b/mm/percpu.c index 6fc9015534f..efe816856a9 100644 --- a/mm/percpu.c +++ b/mm/percpu.c @@ -31,7 +31,7 @@ * as small as 4 bytes. The allocator organizes chunks into lists * according to free size and tries to allocate from the fullest one. * Each chunk keeps the maximum contiguous area size hint which is - * guaranteed to be eqaul to or larger than the maximum contiguous + * guaranteed to be equal to or larger than the maximum contiguous * area in the chunk. This helps the allocator not to iterate the * chunk maps unnecessarily. * diff --git a/mm/vmscan.c b/mm/vmscan.c index c5dfabf25f1..b94c9464f26 100644 --- a/mm/vmscan.c +++ b/mm/vmscan.c @@ -79,8 +79,8 @@ struct scan_control { int order; /* - * Intend to reclaim enough contenious memory rather than to reclaim - * enough amount memory. I.e, it's the mode for high order allocation. + * Intend to reclaim enough continuous memory rather than reclaim + * enough amount of memory. i.e, mode for high order allocation. */ bool lumpy_reclaim_mode; diff --git a/net/ax25/Kconfig b/net/ax25/Kconfig index 2a72aa96a56..705e53ef4af 100644 --- a/net/ax25/Kconfig +++ b/net/ax25/Kconfig @@ -7,7 +7,7 @@ menuconfig HAMRADIO bool "Amateur Radio support" help If you want to connect your Linux box to an amateur radio, answer Y - here. You want to read <http://www.tapr.org/tapr/html/pkthome.html> + here. You want to read <http://www.tapr.org/> and more specifically about AX.25 on Linux <http://www.linux-ax25.org/>. @@ -42,7 +42,7 @@ config AX25 check out the file <file:Documentation/networking/ax25.txt> in the kernel source. More information about digital amateur radio in general is on the WWW at - <http://www.tapr.org/tapr/html/pkthome.html>. + <http://www.tapr.org/>. To compile this driver as a module, choose M here: the module will be called ax25. @@ -89,7 +89,7 @@ config NETROM <http://www.linux-ax25.org>. You also might want to check out the file <file:Documentation/networking/ax25.txt>. More information about digital amateur radio in general is on the WWW at - <http://www.tapr.org/tapr/html/pkthome.html>. + <http://www.tapr.org/>. To compile this driver as a module, choose M here: the module will be called netrom. @@ -108,7 +108,7 @@ config ROSE <http://www.linux-ax25.org>. You also might want to check out the file <file:Documentation/networking/ax25.txt>. More information about digital amateur radio in general is on the WWW at - <http://www.tapr.org/tapr/html/pkthome.html>. + <http://www.tapr.org/>. To compile this driver as a module, choose M here: the module will be called rose. diff --git a/net/ipv4/Kconfig b/net/ipv4/Kconfig index e848e6c062c..9e95d7fb6d5 100644 --- a/net/ipv4/Kconfig +++ b/net/ipv4/Kconfig @@ -84,7 +84,7 @@ config IP_FIB_TRIE An experimental study of compression methods for dynamic tries Stefan Nilsson and Matti Tikkanen. Algorithmica, 33(1):19-33, 2002. - http://www.nada.kth.se/~snilsson/public/papers/dyntrie2/ + <http://www.csc.kth.se/~snilsson/software/dyntrie2/> endchoice @@ -562,7 +562,7 @@ config TCP_CONG_VENO distinguishing to circumvent the difficult judgment of the packet loss type. TCP Veno cuts down less congestion window in response to random loss packets. - See http://www.ntu.edu.sg/home5/ZHOU0022/papers/CPFu03a.pdf + See <http://ieeexplore.ieee.org/xpl/freeabs_all.jsp?arnumber=1177186> config TCP_CONG_YEAH tristate "YeAH TCP" diff --git a/net/ipv4/cipso_ipv4.c b/net/ipv4/cipso_ipv4.c index 3a92a76ae41..094e150c626 100644 --- a/net/ipv4/cipso_ipv4.c +++ b/net/ipv4/cipso_ipv4.c @@ -9,7 +9,7 @@ * * The CIPSO draft specification can be found in the kernel's Documentation * directory as well as the following URL: - * http://netlabel.sourceforge.net/files/draft-ietf-cipso-ipsecurity-01.txt + * http://tools.ietf.org/id/draft-ietf-cipso-ipsecurity-01.txt * The FIPS-188 specification can be found at the following URL: * http://www.itl.nist.gov/fipspubs/fip188.htm * diff --git a/net/ipv4/fib_trie.c b/net/ipv4/fib_trie.c index cd5e13aee7d..b1445089510 100644 --- a/net/ipv4/fib_trie.c +++ b/net/ipv4/fib_trie.c @@ -16,7 +16,7 @@ * * An experimental study of compression methods for dynamic tries * Stefan Nilsson and Matti Tikkanen. Algorithmica, 33(1):19-33, 2002. - * http://www.nada.kth.se/~snilsson/public/papers/dyntrie2/ + * http://www.csc.kth.se/~snilsson/software/dyntrie2/ * * * IP-address lookup using LC-tries. Stefan Nilsson and Gunnar Karlsson diff --git a/net/ipv4/netfilter/Kconfig b/net/ipv4/netfilter/Kconfig index 8e3350643b6..babd1a2bae5 100644 --- a/net/ipv4/netfilter/Kconfig +++ b/net/ipv4/netfilter/Kconfig @@ -147,7 +147,7 @@ config IP_NF_TARGET_ULOG which can only be viewed through syslog. The appropriate userspace logging daemon (ulogd) may be obtained from - <http://www.gnumonks.org/projects/ulogd/> + <http://www.netfilter.org/projects/ulogd/index.html> To compile it as a module, choose M here. If unsure, say N. diff --git a/net/ipv4/tcp_illinois.c b/net/ipv4/tcp_illinois.c index 1eba160b72d..00ca688d896 100644 --- a/net/ipv4/tcp_illinois.c +++ b/net/ipv4/tcp_illinois.c @@ -6,7 +6,7 @@ * The algorithm is described in: * "TCP-Illinois: A Loss and Delay-Based Congestion Control Algorithm * for High-Speed Networks" - * http://www.ews.uiuc.edu/~shaoliu/papersandslides/liubassri06perf.pdf + * http://www.ifp.illinois.edu/~srikant/Papers/liubassri06perf.pdf * * Implemented from description in paper and ns-2 simulation. * Copyright (C) 2007 Stephen Hemminger <shemminger@linux-foundation.org> diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c index ee0df481749..3357f69e353 100644 --- a/net/ipv4/tcp_input.c +++ b/net/ipv4/tcp_input.c @@ -428,10 +428,10 @@ EXPORT_SYMBOL(tcp_initialize_rcv_mss); * * The algorithm for RTT estimation w/o timestamps is based on * Dynamic Right-Sizing (DRS) by Wu Feng and Mike Fisk of LANL. - * <http://www.lanl.gov/radiant/website/pubs/drs/lacsi2001.ps> + * <http://public.lanl.gov/radiant/pubs.html#DRS> * * More detail on this code can be found at - * <http://www.psc.edu/~jheffner/senior_thesis.ps>, + * <http://staff.psc.edu/jheffner/>, * though this reference is out of date. A new paper * is pending. */ diff --git a/net/ipv4/tcp_veno.c b/net/ipv4/tcp_veno.c index b612acf7618..38bc0b52d74 100644 --- a/net/ipv4/tcp_veno.c +++ b/net/ipv4/tcp_veno.c @@ -6,7 +6,7 @@ * "TCP Veno: TCP Enhancement for Transmission over Wireless Access Networks." * IEEE Journal on Selected Areas in Communication, * Feb. 2003. - * See http://www.ntu.edu.sg/home5/ZHOU0022/papers/CPFu03a.pdf + * See http://www.ie.cuhk.edu.hk/fileadmin/staff_upload/soung/Journal/J3.pdf */ #include <linux/mm.h> diff --git a/net/irda/irnet/irnet_ppp.c b/net/irda/irnet/irnet_ppp.c index 0993bd454ea..7fa86373de4 100644 --- a/net/irda/irnet/irnet_ppp.c +++ b/net/irda/irnet/irnet_ppp.c @@ -664,7 +664,7 @@ dev_irnet_ioctl( if((val == N_SYNC_PPP) || (val == N_PPP)) { DEBUG(FS_INFO, "Entering PPP discipline.\n"); - /* PPP channel setup (ap->chan in configued in dev_irnet_open())*/ + /* PPP channel setup (ap->chan in configured in dev_irnet_open())*/ if (mutex_lock_interruptible(&ap->lock)) return -EINTR; diff --git a/net/mac80211/mesh.h b/net/mac80211/mesh.h index ebd3f1d9d88..58e74112896 100644 --- a/net/mac80211/mesh.h +++ b/net/mac80211/mesh.h @@ -115,7 +115,7 @@ struct mesh_path { * @hash_rnd: random value used for hash computations * @entries: number of entries in the table * @free_node: function to free nodes of the table - * @copy_node: fuction to copy nodes of the table + * @copy_node: function to copy nodes of the table * @size_order: determines size of the table, there will be 2^size_order hash * buckets * @mean_chain_len: maximum average length for the hash buckets' list, if it is diff --git a/net/netfilter/nf_conntrack_proto_tcp.c b/net/netfilter/nf_conntrack_proto_tcp.c index c4c885dca3b..3fb2b73b24d 100644 --- a/net/netfilter/nf_conntrack_proto_tcp.c +++ b/net/netfilter/nf_conntrack_proto_tcp.c @@ -329,8 +329,8 @@ static unsigned int get_conntrack_index(const struct tcphdr *tcph) /* TCP connection tracking based on 'Real Stateful TCP Packet Filtering in IP Filter' by Guido van Rooij. - http://www.nluug.nl/events/sane2000/papers.html - http://www.iae.nl/users/guido/papers/tcp_filtering.ps.gz + http://www.sane.nl/events/sane2000/papers.html + http://www.darkart.com/mirrors/www.obfuscation.org/ipf/ The boundaries and the conditions are changed according to RFC793: the packet must intersect the window (i.e. segments may be diff --git a/net/sunrpc/rpc_pipe.c b/net/sunrpc/rpc_pipe.c index 28bcd52e3ce..52f25243214 100644 --- a/net/sunrpc/rpc_pipe.c +++ b/net/sunrpc/rpc_pipe.c @@ -203,7 +203,7 @@ rpc_pipe_release(struct inode *inode, struct file *filp) mutex_lock(&inode->i_mutex); if (rpci->ops == NULL) goto out; - msg = (struct rpc_pipe_msg *)filp->private_data; + msg = filp->private_data; if (msg != NULL) { spin_lock(&inode->i_lock); msg->errno = -EAGAIN; @@ -325,7 +325,7 @@ rpc_pipe_ioctl(struct file *filp, unsigned int cmd, unsigned long arg) len = rpci->pipelen; if (filp->private_data) { struct rpc_pipe_msg *msg; - msg = (struct rpc_pipe_msg *)filp->private_data; + msg = filp->private_data; len += msg->len - msg->copied; } spin_unlock(&inode->i_lock); diff --git a/net/wanrouter/wanmain.c b/net/wanrouter/wanmain.c index 2bf23406637..74944a2dd43 100644 --- a/net/wanrouter/wanmain.c +++ b/net/wanrouter/wanmain.c @@ -471,7 +471,7 @@ static int wanrouter_device_setup(struct wan_device *wandev, data = vmalloc(conf->data_size); if (!data) { printk(KERN_INFO - "%s: ERROR, Faild allocate kernel memory !\n", + "%s: ERROR, Failed allocate kernel memory !\n", wandev->name); kfree(conf); return -ENOBUFS; @@ -481,7 +481,7 @@ static int wanrouter_device_setup(struct wan_device *wandev, err = wandev->setup(wandev, conf); } else { printk(KERN_INFO - "%s: ERROR, Faild to copy from user data !\n", + "%s: ERROR, Failed to copy from user data !\n", wandev->name); err = -EFAULT; } diff --git a/sound/oss/ac97_codec.c b/sound/oss/ac97_codec.c index 456a1b4d783..854c303264d 100644 --- a/sound/oss/ac97_codec.c +++ b/sound/oss/ac97_codec.c @@ -21,11 +21,8 @@ * ************************************************************************** * - * The Intel Audio Codec '97 specification is available at the Intel - * audio homepage: http://developer.intel.com/ial/scalableplatforms/audio/ - * - * The specification itself is currently available at: - * ftp://download.intel.com/ial/scalableplatforms/ac97r22.pdf + * The Intel Audio Codec '97 specification is available at: + * http://download.intel.com/support/motherboards/desktop/sb/ac97_r23.pdf * ************************************************************************** * diff --git a/sound/pci/ens1370.c b/sound/pci/ens1370.c index c7fba537981..537cfba829a 100644 --- a/sound/pci/ens1370.c +++ b/sound/pci/ens1370.c @@ -22,7 +22,7 @@ /* Power-Management-Code ( CONFIG_PM ) * for ens1371 only ( FIXME ) * derived from cs4281.c, atiixp.c and via82xx.c - * using http://www.alsa-project.org/~iwai/writing-an-alsa-driver/c1540.htm + * using http://www.alsa-project.org/~tiwai/writing-an-alsa-driver/ * by Kurt J. Bosch */ diff --git a/sound/pci/intel8x0.c b/sound/pci/intel8x0.c index 46774924957..400f9ebd243 100644 --- a/sound/pci/intel8x0.c +++ b/sound/pci/intel8x0.c @@ -716,7 +716,7 @@ static void snd_intel8x0_setup_periods(struct intel8x0 *chip, struct ichdev *ich * Intel 82443MX running a 100MHz processor system bus has a hardware bug, * which aborts PCI busmaster for audio transfer. A workaround is to set * the pages as non-cached. For details, see the errata in - * http://www.intel.com/design/chipsets/specupdt/245051.htm + * http://download.intel.com/design/chipsets/specupdt/24505108.pdf */ static void fill_nocache(void *buf, int size, int nocache) { diff --git a/sound/soc/s3c24xx/neo1973_gta02_wm8753.c b/sound/soc/s3c24xx/neo1973_gta02_wm8753.c index 209c25994c7..4719558289d 100644 --- a/sound/soc/s3c24xx/neo1973_gta02_wm8753.c +++ b/sound/soc/s3c24xx/neo1973_gta02_wm8753.c @@ -182,7 +182,7 @@ static int neo1973_gta02_voice_hw_params( if (ret < 0) return ret; - /* configue and enable PLL for 12.288MHz output */ + /* configure and enable PLL for 12.288MHz output */ ret = snd_soc_dai_set_pll(codec_dai, WM8753_PLL2, 0, iis_clkrate / 4, 12288000); if (ret < 0) diff --git a/sound/soc/s3c24xx/neo1973_wm8753.c b/sound/soc/s3c24xx/neo1973_wm8753.c index 0cb4f86f6d1..4ac620988e7 100644 --- a/sound/soc/s3c24xx/neo1973_wm8753.c +++ b/sound/soc/s3c24xx/neo1973_wm8753.c @@ -201,7 +201,7 @@ static int neo1973_voice_hw_params(struct snd_pcm_substream *substream, if (ret < 0) return ret; - /* configue and enable PLL for 12.288MHz output */ + /* configure and enable PLL for 12.288MHz output */ ret = snd_soc_dai_set_pll(codec_dai, WM8753_PLL2, 0, iis_clkrate / 4, 12288000); if (ret < 0) diff --git a/usr/Kconfig b/usr/Kconfig index e2721f5a350..c2c7fe2f717 100644 --- a/usr/Kconfig +++ b/usr/Kconfig @@ -144,7 +144,7 @@ config INITRAMFS_COMPRESSION_LZO depends on RD_LZO help Its compression ratio is the poorest among the four. The kernel - size is about about 10% bigger than gzip; however its speed + size is about 10% bigger than gzip; however its speed (both compression and decompression) is the fastest. endchoice |