diff options
| -rw-r--r-- | Documentation/fb/gxfb.txt | 51 | ||||
| -rw-r--r-- | drivers/video/geode/Kconfig | 20 | ||||
| -rw-r--r-- | drivers/video/geode/display_gx.c | 7 | ||||
| -rw-r--r-- | drivers/video/geode/gxfb_core.c | 14 |
4 files changed, 59 insertions, 33 deletions
diff --git a/Documentation/fb/gxfb.txt b/Documentation/fb/gxfb.txt new file mode 100644 index 00000000000..b5609614201 --- /dev/null +++ b/Documentation/fb/gxfb.txt @@ -0,0 +1,51 @@ +[This file is cloned from VesaFB/aty128fb] + +What is gxfb? +================= + +This is a graphics framebuffer driver for AMD Geode GX2 based processors. + +Advantages: + + * No need to use AMD's VSA code (or other VESA emulation layer) in the + BIOS. + * It provides a nice large console (128 cols + 48 lines with 1024x768) + without using tiny, unreadable fonts. + * You can run XF68_FBDev on top of /dev/fb0 + * Most important: boot logo :-) + +Disadvantages: + + * graphic mode is slower than text mode... + + +How to use it? +============== + +Switching modes is done using gxfb.mode_option=<resolution>... boot +parameter or using `fbset' program. + +See Documentation/fb/modedb.txt for more information on modedb +resolutions. + + +X11 +=== + +XF68_FBDev should generally work fine, but it is non-accelerated. + + +Configuration +============= + +You can pass kernel command line options to gxfb with gxfb.<option>. +For example, gxfb.mode_option=800x600@75. +Accepted options: + +mode_option - specify the video mode. Of the form + <x>x<y>[-<bpp>][@<refresh>] +vram - size of video ram (normally auto-detected) + + +-- +Andres Salomon <dilinger@debian.org> diff --git a/drivers/video/geode/Kconfig b/drivers/video/geode/Kconfig index 7608429b394..c5d8ba4b9fc 100644 --- a/drivers/video/geode/Kconfig +++ b/drivers/video/geode/Kconfig @@ -38,26 +38,6 @@ config FB_GEODE_GX If unsure, say N. -config FB_GEODE_GX_SET_FBSIZE - bool "Manually specify the Geode GX framebuffer size" - depends on FB_GEODE_GX - default n - ---help--- - If you want to manually specify the size of your GX framebuffer, - say Y here, otherwise say N to dynamically probe it. - - Say N unless you know what you are doing. - -config FB_GEODE_GX_FBSIZE - hex "Size of the GX framebuffer, in bytes" - depends on FB_GEODE_GX_SET_FBSIZE - default "0x1600000" - ---help--- - Specify the size of the GX framebuffer. Normally, you will - want this to be MB aligned. Common values are 0x80000 (8MB) - and 0x1600000 (16MB). Don't change this unless you know what - you are doing - config FB_GEODE_GX1 tristate "AMD Geode GX1 framebuffer support (EXPERIMENTAL)" depends on FB && FB_GEODE && EXPERIMENTAL diff --git a/drivers/video/geode/display_gx.c b/drivers/video/geode/display_gx.c index 0f16e4bffc6..8cd75725a31 100644 --- a/drivers/video/geode/display_gx.c +++ b/drivers/video/geode/display_gx.c @@ -21,12 +21,6 @@ #include "geodefb.h" #include "display_gx.h" -#ifdef CONFIG_FB_GEODE_GX_SET_FBSIZE -unsigned int gx_frame_buffer_size(void) -{ - return CONFIG_FB_GEODE_GX_FBSIZE; -} -#else unsigned int gx_frame_buffer_size(void) { unsigned int val; @@ -41,7 +35,6 @@ unsigned int gx_frame_buffer_size(void) val = (unsigned int)(inw(0xAC1E)) & 0xFFl; return (val << 19); } -#endif int gx_line_delta(int xres, int bpp) { diff --git a/drivers/video/geode/gxfb_core.c b/drivers/video/geode/gxfb_core.c index 546e53038fa..8021bcb9ab6 100644 --- a/drivers/video/geode/gxfb_core.c +++ b/drivers/video/geode/gxfb_core.c @@ -37,6 +37,7 @@ #include "video_gx.h" static char *mode_option; +static int vram; /* Modes relevant to the GX (taken from modedb.c) */ static const struct fb_videomode gx_modedb[] __initdata = { @@ -208,7 +209,6 @@ static int gxfb_blank(int blank_mode, struct fb_info *info) static int __init gxfb_map_video_memory(struct fb_info *info, struct pci_dev *dev) { struct geodefb_par *par = info->par; - int fb_len; int ret; ret = pci_enable_device(dev); @@ -233,21 +233,20 @@ static int __init gxfb_map_video_memory(struct fb_info *info, struct pci_dev *de ret = pci_request_region(dev, 0, "gxfb (framebuffer)"); if (ret < 0) return ret; - if ((fb_len = gx_frame_buffer_size()) < 0) - return -ENOMEM; + info->fix.smem_start = pci_resource_start(dev, 0); - info->fix.smem_len = fb_len; + info->fix.smem_len = vram ? vram : gx_frame_buffer_size(); info->screen_base = ioremap(info->fix.smem_start, info->fix.smem_len); if (!info->screen_base) return -ENOMEM; - /* Set the 16MB aligned base address of the graphics memory region + /* Set the 16MiB aligned base address of the graphics memory region * in the display controller */ writel(info->fix.smem_start & 0xFF000000, par->dc_regs + DC_GLIU0_MEM_OFFSET); - dev_info(&dev->dev, "%d Kibyte of video memory at 0x%lx\n", + dev_info(&dev->dev, "%d KiB of video memory at 0x%lx\n", info->fix.smem_len / 1024, info->fix.smem_start); return 0; @@ -455,5 +454,8 @@ module_exit(gxfb_cleanup); module_param(mode_option, charp, 0); MODULE_PARM_DESC(mode_option, "video mode (<x>x<y>[-<bpp>][@<refr>])"); +module_param(vram, int, 0); +MODULE_PARM_DESC(vram, "video memory size"); + MODULE_DESCRIPTION("Framebuffer driver for the AMD Geode GX"); MODULE_LICENSE("GPL"); |