diff options
-rw-r--r-- | drivers/mmc/host/sdhci.c | 63 | ||||
-rw-r--r-- | drivers/mmc/host/sdhci.h | 2 | ||||
-rw-r--r-- | include/linux/mmc/sdhci.h | 1 |
3 files changed, 49 insertions, 17 deletions
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c index cc63f5ed231..b9ed66307ac 100644 --- a/drivers/mmc/host/sdhci.c +++ b/drivers/mmc/host/sdhci.c @@ -838,9 +838,10 @@ static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_command *cmd) } static void sdhci_set_transfer_mode(struct sdhci_host *host, - struct mmc_data *data) + struct mmc_command *cmd) { u16 mode; + struct mmc_data *data = cmd->data; if (data == NULL) return; @@ -848,11 +849,14 @@ static void sdhci_set_transfer_mode(struct sdhci_host *host, WARN_ON(!host->data); mode = SDHCI_TRNS_BLK_CNT_EN; - if (data->blocks > 1) { - if (host->quirks & SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12) - mode |= SDHCI_TRNS_MULTI | SDHCI_TRNS_ACMD12; - else - mode |= SDHCI_TRNS_MULTI; + if (mmc_op_multi(cmd->opcode) || data->blocks > 1) { + mode |= SDHCI_TRNS_MULTI; + /* + * If we are sending CMD23, CMD12 never gets sent + * on successful completion (so no Auto-CMD12). + */ + if (!host->mrq->sbc && (host->flags & SDHCI_AUTO_CMD12)) + mode |= SDHCI_TRNS_AUTO_CMD12; } if (data->flags & MMC_DATA_READ) mode |= SDHCI_TRNS_READ; @@ -893,7 +897,15 @@ static void sdhci_finish_data(struct sdhci_host *host) else data->bytes_xfered = data->blksz * data->blocks; - if (data->stop) { + /* + * Need to send CMD12 if - + * a) open-ended multiblock transfer (no CMD23) + * b) error in multiblock transfer + */ + if (data->stop && + (data->error || + !host->mrq->sbc)) { + /* * The controller needs a reset of internal state machines * upon error conditions. @@ -949,7 +961,7 @@ static void sdhci_send_command(struct sdhci_host *host, struct mmc_command *cmd) sdhci_writel(host, cmd->arg, SDHCI_ARGUMENT); - sdhci_set_transfer_mode(host, cmd->data); + sdhci_set_transfer_mode(host, cmd); if ((cmd->flags & MMC_RSP_136) && (cmd->flags & MMC_RSP_BUSY)) { printk(KERN_ERR "%s: Unsupported response type!\n", @@ -1004,13 +1016,21 @@ static void sdhci_finish_command(struct sdhci_host *host) host->cmd->error = 0; - if (host->data && host->data_early) - sdhci_finish_data(host); + /* Finished CMD23, now send actual command. */ + if (host->cmd == host->mrq->sbc) { + host->cmd = NULL; + sdhci_send_command(host, host->mrq->cmd); + } else { - if (!host->cmd->data) - tasklet_schedule(&host->finish_tasklet); + /* Processed actual command. */ + if (host->data && host->data_early) + sdhci_finish_data(host); - host->cmd = NULL; + if (!host->cmd->data) + tasklet_schedule(&host->finish_tasklet); + + host->cmd = NULL; + } } static void sdhci_set_clock(struct sdhci_host *host, unsigned int clock) @@ -1189,7 +1209,12 @@ static void sdhci_request(struct mmc_host *mmc, struct mmc_request *mrq) #ifndef SDHCI_USE_LEDS_CLASS sdhci_activate_led(host); #endif - if (host->quirks & SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12) { + + /* + * Ensure we don't send the STOP for non-SET_BLOCK_COUNTED + * requests if Auto-CMD12 is enabled. + */ + if (!mrq->sbc && (host->flags & SDHCI_AUTO_CMD12)) { if (mrq->stop) { mrq->data->stop = NULL; mrq->stop = NULL; @@ -1227,7 +1252,10 @@ static void sdhci_request(struct mmc_host *mmc, struct mmc_request *mrq) host->mrq = mrq; } - sdhci_send_command(host, mrq->cmd); + if (mrq->sbc) + sdhci_send_command(host, mrq->sbc); + else + sdhci_send_command(host, mrq->cmd); } mmiowb(); @@ -2455,7 +2483,10 @@ int sdhci_add_host(struct sdhci_host *host) } else mmc->f_min = host->max_clk / SDHCI_MAX_DIV_SPEC_200; - mmc->caps |= MMC_CAP_SDIO_IRQ | MMC_CAP_ERASE; + mmc->caps |= MMC_CAP_SDIO_IRQ | MMC_CAP_ERASE | MMC_CAP_CMD23; + + if (host->quirks & SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12) + host->flags |= SDHCI_AUTO_CMD12; /* * A controller may support 8-bit width, but the board itself diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h index 7e28eec97f0..2c3fbc5a4c0 100644 --- a/drivers/mmc/host/sdhci.h +++ b/drivers/mmc/host/sdhci.h @@ -36,7 +36,7 @@ #define SDHCI_TRANSFER_MODE 0x0C #define SDHCI_TRNS_DMA 0x01 #define SDHCI_TRNS_BLK_CNT_EN 0x02 -#define SDHCI_TRNS_ACMD12 0x04 +#define SDHCI_TRNS_AUTO_CMD12 0x04 #define SDHCI_TRNS_READ 0x10 #define SDHCI_TRNS_MULTI 0x20 diff --git a/include/linux/mmc/sdhci.h b/include/linux/mmc/sdhci.h index e902618d68f..73e27ba51e9 100644 --- a/include/linux/mmc/sdhci.h +++ b/include/linux/mmc/sdhci.h @@ -113,6 +113,7 @@ struct sdhci_host { #define SDHCI_DEVICE_DEAD (1<<3) /* Device unresponsive */ #define SDHCI_SDR50_NEEDS_TUNING (1<<4) /* SDR50 needs tuning */ #define SDHCI_NEEDS_RETUNING (1<<5) /* Host needs retuning */ +#define SDHCI_AUTO_CMD12 (1<<6) /* Auto CMD12 support */ unsigned int version; /* SDHCI spec. version */ |