summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--arch/arm/Kconfig2
-rw-r--r--arch/arm/boot/compressed/misc.c4
-rw-r--r--arch/arm/mach-imx/generic.c52
-rw-r--r--arch/arm/mach-imx/mx1ads.c74
-rw-r--r--arch/arm/mach-ixp4xx/Kconfig15
-rw-r--r--arch/arm/mach-ixp4xx/Makefile3
-rw-r--r--drivers/input/touchscreen/corgi_ts.c2
-rw-r--r--drivers/serial/imx.c40
-rw-r--r--include/asm-arm/arch-imx/imx-uart.h10
-rw-r--r--include/asm-arm/arch-ixp4xx/io.h7
-rw-r--r--include/asm-arm/arch-ixp4xx/memory.h2
-rw-r--r--include/asm-arm/unistd.h21
12 files changed, 141 insertions, 91 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 1dbf6ddb300..08b7cc900ca 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -150,8 +150,6 @@ config ARCH_IOP3XX
config ARCH_IXP4XX
bool "IXP4xx-based"
- select DMABOUNCE
- select PCI
help
Support for Intel's IXP4XX (XScale) family of processors.
diff --git a/arch/arm/boot/compressed/misc.c b/arch/arm/boot/compressed/misc.c
index 0af3772efcb..ace3fb5835d 100644
--- a/arch/arm/boot/compressed/misc.c
+++ b/arch/arm/boot/compressed/misc.c
@@ -38,10 +38,10 @@ static void icedcc_putc(int ch)
if (--i < 0)
return;
- asm("mrc p14, 0, %0, c0, c0, 0" : "=r" (status));
+ asm volatile ("mrc p14, 0, %0, c0, c0, 0" : "=r" (status));
} while (status & 2);
- asm("mcr p15, 0, %0, c1, c0, 0" : : "r" (ch));
+ asm("mcr p14, 0, %0, c1, c0, 0" : : "r" (ch));
}
#define putc(ch) icedcc_putc(ch)
diff --git a/arch/arm/mach-imx/generic.c b/arch/arm/mach-imx/generic.c
index 9d8331be2b5..12ea58a3b84 100644
--- a/arch/arm/mach-imx/generic.c
+++ b/arch/arm/mach-imx/generic.c
@@ -195,56 +195,6 @@ void __init imx_set_mmc_info(struct imxmmc_platform_data *info)
}
EXPORT_SYMBOL(imx_set_mmc_info);
-static struct resource imx_uart1_resources[] = {
- [0] = {
- .start = 0x00206000,
- .end = 0x002060FF,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = (UART1_MINT_RX),
- .end = (UART1_MINT_RX),
- .flags = IORESOURCE_IRQ,
- },
- [2] = {
- .start = (UART1_MINT_TX),
- .end = (UART1_MINT_TX),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device imx_uart1_device = {
- .name = "imx-uart",
- .id = 0,
- .num_resources = ARRAY_SIZE(imx_uart1_resources),
- .resource = imx_uart1_resources,
-};
-
-static struct resource imx_uart2_resources[] = {
- [0] = {
- .start = 0x00207000,
- .end = 0x002070FF,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = (UART2_MINT_RX),
- .end = (UART2_MINT_RX),
- .flags = IORESOURCE_IRQ,
- },
- [2] = {
- .start = (UART2_MINT_TX),
- .end = (UART2_MINT_TX),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device imx_uart2_device = {
- .name = "imx-uart",
- .id = 1,
- .num_resources = ARRAY_SIZE(imx_uart2_resources),
- .resource = imx_uart2_resources,
-};
-
static struct imxfb_mach_info imx_fb_info;
void __init set_imx_fb_info(struct imxfb_mach_info *hard_imx_fb_info)
@@ -283,8 +233,6 @@ static struct platform_device imxfb_device = {
static struct platform_device *devices[] __initdata = {
&imx_mmc_device,
&imxfb_device,
- &imx_uart1_device,
- &imx_uart2_device,
};
static struct map_desc imx_io_desc[] __initdata = {
diff --git a/arch/arm/mach-imx/mx1ads.c b/arch/arm/mach-imx/mx1ads.c
index e34d0df90ae..e1f6c0bbe1e 100644
--- a/arch/arm/mach-imx/mx1ads.c
+++ b/arch/arm/mach-imx/mx1ads.c
@@ -26,6 +26,7 @@
#include <asm/mach/arch.h>
#include <asm/arch/mmc.h>
+#include <asm/arch/imx-uart.h>
#include <linux/interrupt.h>
#include "generic.h"
@@ -48,8 +49,70 @@ static struct platform_device cs89x0_device = {
.resource = cs89x0_resources,
};
+static struct imxuart_platform_data uart_pdata = {
+ .flags = IMXUART_HAVE_RTSCTS,
+};
+
+static struct resource imx_uart1_resources[] = {
+ [0] = {
+ .start = 0x00206000,
+ .end = 0x002060FF,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = (UART1_MINT_RX),
+ .end = (UART1_MINT_RX),
+ .flags = IORESOURCE_IRQ,
+ },
+ [2] = {
+ .start = (UART1_MINT_TX),
+ .end = (UART1_MINT_TX),
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device imx_uart1_device = {
+ .name = "imx-uart",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(imx_uart1_resources),
+ .resource = imx_uart1_resources,
+ .dev = {
+ .platform_data = &uart_pdata,
+ }
+};
+
+static struct resource imx_uart2_resources[] = {
+ [0] = {
+ .start = 0x00207000,
+ .end = 0x002070FF,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = (UART2_MINT_RX),
+ .end = (UART2_MINT_RX),
+ .flags = IORESOURCE_IRQ,
+ },
+ [2] = {
+ .start = (UART2_MINT_TX),
+ .end = (UART2_MINT_TX),
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device imx_uart2_device = {
+ .name = "imx-uart",
+ .id = 1,
+ .num_resources = ARRAY_SIZE(imx_uart2_resources),
+ .resource = imx_uart2_resources,
+ .dev = {
+ .platform_data = &uart_pdata,
+ }
+};
+
static struct platform_device *devices[] __initdata = {
&cs89x0_device,
+ &imx_uart1_device,
+ &imx_uart2_device,
};
#ifdef CONFIG_MMC_IMX
@@ -75,6 +138,17 @@ mx1ads_init(void)
imx_gpio_mode(GPIO_PORTB | GPIO_GIUS | GPIO_IN | 20);
imx_set_mmc_info(&mx1ads_mmc_info);
#endif
+
+ imx_gpio_mode(PC9_PF_UART1_CTS);
+ imx_gpio_mode(PC10_PF_UART1_RTS);
+ imx_gpio_mode(PC11_PF_UART1_TXD);
+ imx_gpio_mode(PC12_PF_UART1_RXD);
+
+ imx_gpio_mode(PB28_PF_UART2_CTS);
+ imx_gpio_mode(PB29_PF_UART2_RTS);
+ imx_gpio_mode(PB30_PF_UART2_TXD);
+ imx_gpio_mode(PB31_PF_UART2_RXD);
+
platform_add_devices(devices, ARRAY_SIZE(devices));
}
diff --git a/arch/arm/mach-ixp4xx/Kconfig b/arch/arm/mach-ixp4xx/Kconfig
index 5bf50a2a737..2a39f9e481a 100644
--- a/arch/arm/mach-ixp4xx/Kconfig
+++ b/arch/arm/mach-ixp4xx/Kconfig
@@ -11,6 +11,7 @@ comment "IXP4xx Platforms"
config MACH_NSLU2
bool
prompt "Linksys NSLU2"
+ select PCI
help
Say 'Y' here if you want your kernel to support Linksys's
NSLU2 NAS device. For more information on this platform,
@@ -18,6 +19,7 @@ config MACH_NSLU2
config ARCH_AVILA
bool "Avila"
+ select PCI
help
Say 'Y' here if you want your kernel to support the Gateworks
Avila Network Platform. For more information on this platform,
@@ -25,6 +27,7 @@ config ARCH_AVILA
config ARCH_ADI_COYOTE
bool "Coyote"
+ select PCI
help
Say 'Y' here if you want your kernel to support the ADI
Engineering Coyote Gateway Reference Platform. For more
@@ -32,6 +35,7 @@ config ARCH_ADI_COYOTE
config ARCH_IXDP425
bool "IXDP425"
+ select PCI
help
Say 'Y' here if you want your kernel to support Intel's
IXDP425 Development Platform (Also known as Richfield).
@@ -39,6 +43,7 @@ config ARCH_IXDP425
config MACH_IXDPG425
bool "IXDPG425"
+ select PCI
help
Say 'Y' here if you want your kernel to support Intel's
IXDPG425 Development Platform (Also known as Montajade).
@@ -46,6 +51,7 @@ config MACH_IXDPG425
config MACH_IXDP465
bool "IXDP465"
+ select PCI
help
Say 'Y' here if you want your kernel to support Intel's
IXDP465 Development Platform (Also known as BMP).
@@ -72,6 +78,7 @@ config ARCH_PRPMC1100
config MACH_NAS100D
bool
prompt "NAS100D"
+ select PCI
help
Say 'Y' here if you want your kernel to support Iomega's
NAS 100d device. For more information on this platform,
@@ -96,6 +103,7 @@ config CPU_IXP46X
config MACH_GTWX5715
bool "Gemtek WX5715 (Linksys WRV54G)"
depends on ARCH_IXP4XX
+ select PCI
help
This board is currently inside the Linksys WRV54G Gateways.
@@ -110,11 +118,16 @@ config MACH_GTWX5715
"High Speed" UART is n/c (as far as I can tell)
20 Pin ARM/Xscale JTAG interface on J2
-
comment "IXP4xx Options"
+config DMABOUNCE
+ bool
+ default y
+ depends on PCI
+
config IXP4XX_INDIRECT_PCI
bool "Use indirect PCI memory access"
+ depends on PCI
help
IXP4xx provides two methods of accessing PCI memory space:
diff --git a/arch/arm/mach-ixp4xx/Makefile b/arch/arm/mach-ixp4xx/Makefile
index 0471044fa17..5a4aaa0e0a0 100644
--- a/arch/arm/mach-ixp4xx/Makefile
+++ b/arch/arm/mach-ixp4xx/Makefile
@@ -2,8 +2,9 @@
# Makefile for the linux kernel.
#
-obj-y += common.o common-pci.o
+obj-y += common.o
+obj-$(CONFIG_PCI) += common-pci.o
obj-$(CONFIG_ARCH_IXDP4XX) += ixdp425-pci.o ixdp425-setup.o
obj-$(CONFIG_MACH_IXDPG425) += ixdpg425-pci.o coyote-setup.o
obj-$(CONFIG_ARCH_ADI_COYOTE) += coyote-pci.o coyote-setup.o
diff --git a/drivers/input/touchscreen/corgi_ts.c b/drivers/input/touchscreen/corgi_ts.c
index 1042987856f..5013703db0e 100644
--- a/drivers/input/touchscreen/corgi_ts.c
+++ b/drivers/input/touchscreen/corgi_ts.c
@@ -17,7 +17,7 @@
#include <linux/interrupt.h>
#include <linux/module.h>
#include <linux/slab.h>
-#include <asm/irq.h>
+//#include <asm/irq.h>
#include <asm/arch/sharpsl.h>
#include <asm/arch/hardware.h>
diff --git a/drivers/serial/imx.c b/drivers/serial/imx.c
index c3b7a6673e9..d202eb4f384 100644
--- a/drivers/serial/imx.c
+++ b/drivers/serial/imx.c
@@ -45,6 +45,7 @@
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/hardware.h>
+#include <asm/arch/imx-uart.h>
/* We've been assigned a range on the "Low-density serial ports" major */
#define SERIAL_IMX_MAJOR 204
@@ -73,7 +74,8 @@ struct imx_port {
struct uart_port port;
struct timer_list timer;
unsigned int old_status;
- int txirq,rxirq,rtsirq;
+ int txirq,rxirq,rtsirq;
+ int have_rtscts:1;
};
/*
@@ -491,8 +493,12 @@ imx_set_termios(struct uart_port *port, struct termios *termios,
ucr2 = UCR2_SRST | UCR2_IRTS;
if (termios->c_cflag & CRTSCTS) {
- ucr2 &= ~UCR2_IRTS;
- ucr2 |= UCR2_CTSC;
+ if( sport->have_rtscts ) {
+ ucr2 &= ~UCR2_IRTS;
+ ucr2 |= UCR2_CTSC;
+ } else {
+ termios->c_cflag &= ~CRTSCTS;
+ }
}
if (termios->c_cflag & CSTOPB)
@@ -719,27 +725,6 @@ static void __init imx_init_ports(void)
imx_ports[i].timer.function = imx_timeout;
imx_ports[i].timer.data = (unsigned long)&imx_ports[i];
}
-
- imx_gpio_mode(PC9_PF_UART1_CTS);
- imx_gpio_mode(PC10_PF_UART1_RTS);
- imx_gpio_mode(PC11_PF_UART1_TXD);
- imx_gpio_mode(PC12_PF_UART1_RXD);
- imx_gpio_mode(PB28_PF_UART2_CTS);
- imx_gpio_mode(PB29_PF_UART2_RTS);
-
- imx_gpio_mode(PB30_PF_UART2_TXD);
- imx_gpio_mode(PB31_PF_UART2_RXD);
-
-#if 0 /* We don't need these, on the mx1 the _modem_ side of the uart
- * is implemented.
- */
- imx_gpio_mode(PD7_AF_UART2_DTR);
- imx_gpio_mode(PD8_AF_UART2_DCD);
- imx_gpio_mode(PD9_AF_UART2_RI);
- imx_gpio_mode(PD10_AF_UART2_DSR);
-#endif
-
-
}
#ifdef CONFIG_SERIAL_IMX_CONSOLE
@@ -932,7 +917,14 @@ static int serial_imx_resume(struct platform_device *dev)
static int serial_imx_probe(struct platform_device *dev)
{
+ struct imxuart_platform_data *pdata;
+
imx_ports[dev->id].port.dev = &dev->dev;
+
+ pdata = (struct imxuart_platform_data *)dev->dev.platform_data;
+ if(pdata && (pdata->flags & IMXUART_HAVE_RTSCTS))
+ imx_ports[dev->id].have_rtscts = 1;
+
uart_add_one_port(&imx_reg, &imx_ports[dev->id].port);
platform_set_drvdata(dev, &imx_ports[dev->id]);
return 0;
diff --git a/include/asm-arm/arch-imx/imx-uart.h b/include/asm-arm/arch-imx/imx-uart.h
new file mode 100644
index 00000000000..3a685e1780e
--- /dev/null
+++ b/include/asm-arm/arch-imx/imx-uart.h
@@ -0,0 +1,10 @@
+#ifndef ASMARM_ARCH_UART_H
+#define ASMARM_ARCH_UART_H
+
+#define IMXUART_HAVE_RTSCTS (1<<0)
+
+struct imxuart_platform_data {
+ unsigned int flags;
+};
+
+#endif
diff --git a/include/asm-arm/arch-ixp4xx/io.h b/include/asm-arm/arch-ixp4xx/io.h
index 942b622455b..b59520e56fc 100644
--- a/include/asm-arm/arch-ixp4xx/io.h
+++ b/include/asm-arm/arch-ixp4xx/io.h
@@ -260,6 +260,12 @@ out:
#endif
+#ifndef CONFIG_PCI
+
+#define __io(v) v
+
+#else
+
/*
* IXP4xx does not have a transparent cpu -> PCI I/O translation
* window. Instead, it has a set of registers that must be tweaked
@@ -578,6 +584,7 @@ __ixp4xx_iowrite32_rep(void __iomem *addr, const void *vaddr, u32 count)
#define ioport_map(port, nr) ((void __iomem*)(port + PIO_OFFSET))
#define ioport_unmap(addr)
+#endif // !CONFIG_PCI
#endif // __ASM_ARM_ARCH_IO_H
diff --git a/include/asm-arm/arch-ixp4xx/memory.h b/include/asm-arm/arch-ixp4xx/memory.h
index ee211d28a3e..af9667b57ab 100644
--- a/include/asm-arm/arch-ixp4xx/memory.h
+++ b/include/asm-arm/arch-ixp4xx/memory.h
@@ -14,7 +14,7 @@
*/
#define PHYS_OFFSET UL(0x00000000)
-#ifndef __ASSEMBLY__
+#if !defined(__ASSEMBLY__) && defined(CONFIG_PCI)
void ixp4xx_adjust_zones(int node, unsigned long *size, unsigned long *holes);
diff --git a/include/asm-arm/unistd.h b/include/asm-arm/unistd.h
index ee8dfea549b..26f2f4828e0 100644
--- a/include/asm-arm/unistd.h
+++ b/include/asm-arm/unistd.h
@@ -410,7 +410,8 @@ type name(void) { \
__asm__ __volatile__ ( \
__syscall(name) \
: "=r" (__res_r0) \
- : __SYS_REG_LIST() ); \
+ : __SYS_REG_LIST() \
+ : "memory" ); \
__res = __res_r0; \
__syscall_return(type,__res); \
}
@@ -424,7 +425,8 @@ type name(type1 arg1) { \
__asm__ __volatile__ ( \
__syscall(name) \
: "=r" (__res_r0) \
- : __SYS_REG_LIST( "0" (__r0) ) ); \
+ : __SYS_REG_LIST( "0" (__r0) ) \
+ : "memory" ); \
__res = __res_r0; \
__syscall_return(type,__res); \
}
@@ -439,7 +441,8 @@ type name(type1 arg1,type2 arg2) { \
__asm__ __volatile__ ( \
__syscall(name) \
: "=r" (__res_r0) \
- : __SYS_REG_LIST( "0" (__r0), "r" (__r1) ) ); \
+ : __SYS_REG_LIST( "0" (__r0), "r" (__r1) ) \
+ : "memory" ); \
__res = __res_r0; \
__syscall_return(type,__res); \
}
@@ -456,7 +459,8 @@ type name(type1 arg1,type2 arg2,type3 arg3) { \
__asm__ __volatile__ ( \
__syscall(name) \
: "=r" (__res_r0) \
- : __SYS_REG_LIST( "0" (__r0), "r" (__r1), "r" (__r2) ) ); \
+ : __SYS_REG_LIST( "0" (__r0), "r" (__r1), "r" (__r2) ) \
+ : "memory" ); \
__res = __res_r0; \
__syscall_return(type,__res); \
}
@@ -474,7 +478,8 @@ type name(type1 arg1, type2 arg2, type3 arg3, type4 arg4) { \
__asm__ __volatile__ ( \
__syscall(name) \
: "=r" (__res_r0) \
- : __SYS_REG_LIST( "0" (__r0), "r" (__r1), "r" (__r2), "r" (__r3) ) ); \
+ : __SYS_REG_LIST( "0" (__r0), "r" (__r1), "r" (__r2), "r" (__r3) ) \
+ : "memory" ); \
__res = __res_r0; \
__syscall_return(type,__res); \
}
@@ -494,7 +499,8 @@ type name(type1 arg1, type2 arg2, type3 arg3, type4 arg4, type5 arg5) { \
__syscall(name) \
: "=r" (__res_r0) \
: __SYS_REG_LIST( "0" (__r0), "r" (__r1), "r" (__r2), \
- "r" (__r3), "r" (__r4) ) ); \
+ "r" (__r3), "r" (__r4) ) \
+ : "memory" ); \
__res = __res_r0; \
__syscall_return(type,__res); \
}
@@ -514,7 +520,8 @@ type name(type1 arg1, type2 arg2, type3 arg3, type4 arg4, type5 arg5, type6 arg6
__syscall(name) \
: "=r" (__res_r0) \
: __SYS_REG_LIST( "0" (__r0), "r" (__r1), "r" (__r2), \
- "r" (__r3), "r" (__r4), "r" (__r5) ) ); \
+ "r" (__r3), "r" (__r4), "r" (__r5) ) \
+ : "memory" ); \
__res = __res_r0; \
__syscall_return(type,__res); \
}
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-20 14:56:10 +0000