diff options
-rw-r--r-- | drivers/mmc/Kconfig | 2 | ||||
-rw-r--r-- | drivers/mmc/at91_mci.c | 2 | ||||
-rw-r--r-- | drivers/mmc/au1xmmc.c | 2 | ||||
-rw-r--r-- | drivers/mmc/imxmmc.c | 2 | ||||
-rw-r--r-- | drivers/mmc/mmc.c | 294 | ||||
-rw-r--r-- | drivers/mmc/mmc_block.c | 15 | ||||
-rw-r--r-- | drivers/mmc/mmc_queue.c | 63 | ||||
-rw-r--r-- | drivers/mmc/mmc_queue.h | 3 | ||||
-rw-r--r-- | drivers/mmc/mmci.c | 2 | ||||
-rw-r--r-- | drivers/mmc/omap.c | 272 | ||||
-rw-r--r-- | drivers/mmc/omap.h | 55 | ||||
-rw-r--r-- | drivers/mmc/pxamci.c | 2 | ||||
-rw-r--r-- | drivers/mmc/sdhci.c | 17 | ||||
-rw-r--r-- | drivers/mmc/sdhci.h | 2 | ||||
-rw-r--r-- | drivers/mmc/wbsd.c | 2 | ||||
-rw-r--r-- | include/linux/mmc/card.h | 13 | ||||
-rw-r--r-- | include/linux/mmc/protocol.h | 74 |
17 files changed, 593 insertions, 229 deletions
diff --git a/drivers/mmc/Kconfig b/drivers/mmc/Kconfig index ea41852ec8c..f4f8ccaf545 100644 --- a/drivers/mmc/Kconfig +++ b/drivers/mmc/Kconfig @@ -40,7 +40,7 @@ config MMC_ARMMMCI If unsure, say N. config MMC_PXA - tristate "Intel PXA255 Multimedia Card Interface support" + tristate "Intel PXA25x/26x/27x Multimedia Card Interface support" depends on ARCH_PXA && MMC help This selects the Intel(R) PXA(R) Multimedia card Interface. diff --git a/drivers/mmc/at91_mci.c b/drivers/mmc/at91_mci.c index 494b23fb0a0..6495cd8a930 100644 --- a/drivers/mmc/at91_mci.c +++ b/drivers/mmc/at91_mci.c @@ -793,7 +793,7 @@ int at91_mci_get_ro(struct mmc_host *mmc) return read_only; } -static struct mmc_host_ops at91_mci_ops = { +static const struct mmc_host_ops at91_mci_ops = { .request = at91_mci_request, .set_ios = at91_mci_set_ios, .get_ro = at91_mci_get_ro, diff --git a/drivers/mmc/au1xmmc.c b/drivers/mmc/au1xmmc.c index 53ffcbb14a9..447fba5825f 100644 --- a/drivers/mmc/au1xmmc.c +++ b/drivers/mmc/au1xmmc.c @@ -875,7 +875,7 @@ static void au1xmmc_init_dma(struct au1xmmc_host *host) host->rx_chan = rxchan; } -struct mmc_host_ops au1xmmc_ops = { +struct const mmc_host_ops au1xmmc_ops = { .request = au1xmmc_request, .set_ios = au1xmmc_set_ios, }; diff --git a/drivers/mmc/imxmmc.c b/drivers/mmc/imxmmc.c index 659d4a822cc..06e7fcd1922 100644 --- a/drivers/mmc/imxmmc.c +++ b/drivers/mmc/imxmmc.c @@ -877,7 +877,7 @@ static void imxmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) } } -static struct mmc_host_ops imxmci_ops = { +static const struct mmc_host_ops imxmci_ops = { .request = imxmci_request, .set_ios = imxmci_set_ios, }; diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c index 766bc54406e..9d190022a49 100644 --- a/drivers/mmc/mmc.c +++ b/drivers/mmc/mmc.c @@ -4,6 +4,7 @@ * Copyright (C) 2003-2004 Russell King, All Rights Reserved. * SD support Copyright (C) 2004 Ian Molton, All Rights Reserved. * SD support Copyright (C) 2005 Pierre Ossman, All Rights Reserved. + * MMCv4 support Copyright (C) 2006 Philip Langdale, All Rights Reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -396,23 +397,23 @@ static int mmc_select_card(struct mmc_host *host, struct mmc_card *card) return err; /* - * Default bus width is 1 bit. - */ - host->ios.bus_width = MMC_BUS_WIDTH_1; - - /* - * We can only change the bus width of the selected - * card so therefore we have to put the handling + * We can only change the bus width of SD cards when + * they are selected so we have to put the handling * here. + * + * The card is in 1 bit mode by default so + * we only need to change if it supports the + * wider version. */ - if (host->caps & MMC_CAP_4_BIT_DATA) { + if (mmc_card_sd(card) && + (card->scr.bus_widths & SD_SCR_BUS_WIDTH_4)) { + /* - * The card is in 1 bit mode by default so - * we only need to change if it supports the - * wider version. - */ - if (mmc_card_sd(card) && - (card->scr.bus_widths & SD_SCR_BUS_WIDTH_4)) { + * Default bus width is 1 bit. + */ + host->ios.bus_width = MMC_BUS_WIDTH_1; + + if (host->caps & MMC_CAP_4_BIT_DATA) { struct mmc_command cmd; cmd.opcode = SD_APP_SET_BUS_WIDTH; cmd.arg = SD_BUS_WIDTH_4; @@ -453,11 +454,11 @@ static void mmc_deselect_cards(struct mmc_host *host) static inline void mmc_delay(unsigned int ms) { - if (ms < HZ / 1000) { - yield(); + if (ms < 1000 / HZ) { + cond_resched(); mdelay(ms); } else { - msleep_interruptible (ms); + msleep(ms); } } @@ -953,6 +954,137 @@ static void mmc_read_csds(struct mmc_host *host) } } +static void mmc_process_ext_csds(struct mmc_host *host) +{ + int err; + struct mmc_card *card; + + struct mmc_request mrq; + struct mmc_command cmd; + struct mmc_data data; + + struct scatterlist sg; + + /* + * As the ext_csd is so large and mostly unused, we don't store the + * raw block in mmc_card. + */ + u8 *ext_csd; + ext_csd = kmalloc(512, GFP_KERNEL); + if (!ext_csd) { + printk("%s: could not allocate a buffer to receive the ext_csd." + "mmc v4 cards will be treated as v3.\n", + mmc_hostname(host)); + return; + } + + list_for_each_entry(card, &host->cards, node) { + if (card->state & (MMC_STATE_DEAD|MMC_STATE_PRESENT)) + continue; + if (mmc_card_sd(card)) + continue; + if (card->csd.mmca_vsn < CSD_SPEC_VER_4) + continue; + + err = mmc_select_card(host, card); + if (err != MMC_ERR_NONE) { + mmc_card_set_dead(card); + continue; + } + + memset(&cmd, 0, sizeof(struct mmc_command)); + + cmd.opcode = MMC_SEND_EXT_CSD; + cmd.arg = 0; + cmd.flags = MMC_RSP_R1 | MMC_CMD_ADTC; + + memset(&data, 0, sizeof(struct mmc_data)); + + mmc_set_data_timeout(&data, card, 0); + + data.blksz = 512; + data.blocks = 1; + data.flags = MMC_DATA_READ; + data.sg = &sg; + data.sg_len = 1; + + memset(&mrq, 0, sizeof(struct mmc_request)); + + mrq.cmd = &cmd; + mrq.data = &data; + + sg_init_one(&sg, ext_csd, 512); + + mmc_wait_for_req(host, &mrq); + + if (cmd.error != MMC_ERR_NONE || data.error != MMC_ERR_NONE) { + mmc_card_set_dead(card); + continue; + } + + switch (ext_csd[EXT_CSD_CARD_TYPE]) { + case EXT_CSD_CARD_TYPE_52 | EXT_CSD_CARD_TYPE_26: + card->ext_csd.hs_max_dtr = 52000000; + break; + case EXT_CSD_CARD_TYPE_26: + card->ext_csd.hs_max_dtr = 26000000; + break; + default: + /* MMC v4 spec says this cannot happen */ + printk("%s: card is mmc v4 but doesn't support " + "any high-speed modes.\n", + mmc_hostname(card->host)); + mmc_card_set_bad(card); + continue; + } + + /* Activate highspeed support. */ + cmd.opcode = MMC_SWITCH; + cmd.arg = (MMC_SWITCH_MODE_WRITE_BYTE << 24) | + (EXT_CSD_HS_TIMING << 16) | + (1 << 8) | + EXT_CSD_CMD_SET_NORMAL; + cmd.flags = MMC_RSP_R1B | MMC_CMD_AC; + + err = mmc_wait_for_cmd(host, &cmd, CMD_RETRIES); + if (err != MMC_ERR_NONE) { + printk("%s: failed to switch card to mmc v4 " + "high-speed mode.\n", + mmc_hostname(card->host)); + continue; + } + + mmc_card_set_highspeed(card); + + /* Check for host support for wide-bus modes. */ + if (!(host->caps & MMC_CAP_4_BIT_DATA)) { + continue; + } + + /* Activate 4-bit support. */ + cmd.opcode = MMC_SWITCH; + cmd.arg = (MMC_SWITCH_MODE_WRITE_BYTE << 24) | + (EXT_CSD_BUS_WIDTH << 16) | + (EXT_CSD_BUS_WIDTH_4 << 8) | + EXT_CSD_CMD_SET_NORMAL; + cmd.flags = MMC_RSP_R1B | MMC_CMD_AC; + + err = mmc_wait_for_cmd(host, &cmd, CMD_RETRIES); + if (err != MMC_ERR_NONE) { + printk("%s: failed to switch card to " + "mmc v4 4-bit bus mode.\n", + mmc_hostname(card->host)); + continue; + } + + host->ios.bus_width = MMC_BUS_WIDTH_4; + } + + kfree(ext_csd); + + mmc_deselect_cards(host); +} + static void mmc_read_scrs(struct mmc_host *host) { int err; @@ -1025,14 +1157,133 @@ static void mmc_read_scrs(struct mmc_host *host) mmc_deselect_cards(host); } +static void mmc_read_switch_caps(struct mmc_host *host) +{ + int err; + struct mmc_card *card; + struct mmc_request mrq; + struct mmc_command cmd; + struct mmc_data data; + unsigned char *status; + struct scatterlist sg; + + status = kmalloc(64, GFP_KERNEL); + if (!status) { + printk(KERN_WARNING "%s: Unable to allocate buffer for " + "reading switch capabilities.\n", + mmc_hostname(host)); + return; + } + + list_for_each_entry(card, &host->cards, node) { + if (card->state & (MMC_STATE_DEAD|MMC_STATE_PRESENT)) + continue; + if (!mmc_card_sd(card)) + continue; + if (card->scr.sda_vsn < SCR_SPEC_VER_1) + continue; + + err = mmc_select_card(host, card); + if (err != MMC_ERR_NONE) { + mmc_card_set_dead(card); + continue; + } + + memset(&cmd, 0, sizeof(struct mmc_command)); + + cmd.opcode = SD_SWITCH; + cmd.arg = 0x00FFFFF1; + cmd.flags = MMC_RSP_R1 | MMC_CMD_ADTC; + + memset(&data, 0, sizeof(struct mmc_data)); + + mmc_set_data_timeout(&data, card, 0); + + data.blksz = 64; + data.blocks = 1; + data.flags = MMC_DATA_READ; + data.sg = &sg; + data.sg_len = 1; + + memset(&mrq, 0, sizeof(struct mmc_request)); + + mrq.cmd = &cmd; + mrq.data = &data; + + sg_init_one(&sg, status, 64); + + mmc_wait_for_req(host, &mrq); + + if (cmd.error != MMC_ERR_NONE || data.error != MMC_ERR_NONE) { + mmc_card_set_dead(card); + continue; + } + + if (status[13] & 0x02) + card->sw_caps.hs_max_dtr = 50000000; + + memset(&cmd, 0, sizeof(struct mmc_command)); + + cmd.opcode = SD_SWITCH; + cmd.arg = 0x80FFFFF1; + cmd.flags = MMC_RSP_R1 | MMC_CMD_ADTC; + + memset(&data, 0, sizeof(struct mmc_data)); + + mmc_set_data_timeout(&data, card, 0); + + data.blksz = 64; + data.blocks = 1; + data.flags = MMC_DATA_READ; + data.sg = &sg; + data.sg_len = 1; + + memset(&mrq, 0, sizeof(struct mmc_request)); + + mrq.cmd = &cmd; + mrq.data = &data; + + sg_init_one(&sg, status, 64); + + mmc_wait_for_req(host, &mrq); + + if (cmd.error != MMC_ERR_NONE || data.error != MMC_ERR_NONE) { + mmc_card_set_dead(card); + continue; + } + + if ((status[16] & 0xF) != 1) { + printk(KERN_WARNING "%s: Problem switching card " + "into high-speed mode!\n", + mmc_hostname(host)); + continue; + } + + mmc_card_set_highspeed(card); + } + + kfree(status); + + mmc_deselect_cards(host); +} + static unsigned int mmc_calculate_clock(struct mmc_host *host) { struct mmc_card *card; unsigned int max_dtr = host->f_max; list_for_each_entry(card, &host->cards, node) - if (!mmc_card_dead(card) && max_dtr > card->csd.max_dtr) - max_dtr = card->csd.max_dtr; + if (!mmc_card_dead(card)) { + if (mmc_card_highspeed(card) && mmc_card_sd(card)) { + if (max_dtr > card->sw_caps.hs_max_dtr) + max_dtr = card->sw_caps.hs_max_dtr; + } else if (mmc_card_highspeed(card) && !mmc_card_sd(card)) { + if (max_dtr > card->ext_csd.hs_max_dtr) + max_dtr = card->ext_csd.hs_max_dtr; + } else if (max_dtr > card->csd.max_dtr) { + max_dtr = card->csd.max_dtr; + } + } pr_debug("%s: selected %d.%03dMHz transfer rate\n", mmc_hostname(host), @@ -1150,8 +1401,11 @@ static void mmc_setup(struct mmc_host *host) mmc_read_csds(host); - if (host->mode == MMC_MODE_SD) + if (host->mode == MMC_MODE_SD) { mmc_read_scrs(host); + mmc_read_switch_caps(host); + } else + mmc_process_ext_csds(host); } diff --git a/drivers/mmc/mmc_block.c b/drivers/mmc/mmc_block.c index f9027c8db79..87713572293 100644 --- a/drivers/mmc/mmc_block.c +++ b/drivers/mmc/mmc_block.c @@ -83,7 +83,6 @@ static void mmc_blk_put(struct mmc_blk_data *md) md->usage--; if (md->usage == 0) { put_disk(md->disk); - mmc_cleanup_queue(&md->queue); kfree(md); } mutex_unlock(&open_lock); @@ -225,10 +224,10 @@ static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req) struct mmc_blk_data *md = mq->data; struct mmc_card *card = md->queue.card; struct mmc_blk_request brq; - int ret; + int ret = 1; if (mmc_card_claim_host(card)) - goto cmd_err; + goto flush_queue; do { struct mmc_command cmd; @@ -345,8 +344,6 @@ static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req) return 1; cmd_err: - ret = 1; - /* * If this is an SD card and we're writing, we can first * mark the known good sectors as ok. @@ -380,6 +377,7 @@ static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req) mmc_card_release_host(card); +flush_queue: spin_lock_irq(&md->lock); while (ret) { ret = end_that_request_chunk(req, 0, @@ -553,12 +551,11 @@ static void mmc_blk_remove(struct mmc_card *card) if (md) { int devidx; + /* Stop new requests from getting into the queue */ del_gendisk(md->disk); - /* - * I think this is needed. - */ - md->disk->queue = NULL; + /* Then flush out any already in there */ + mmc_cleanup_queue(&md->queue); devidx = md->disk->first_minor >> MMC_SHIFT; __clear_bit(devidx, dev_use); diff --git a/drivers/mmc/mmc_queue.c b/drivers/mmc/mmc_queue.c index 61a1de85cb2..a17423a4ed8 100644 --- a/drivers/mmc/mmc_queue.c +++ b/drivers/mmc/mmc_queue.c @@ -10,13 +10,13 @@ */ #include <linux/module.h> #include <linux/blkdev.h> +#include <linux/kthread.h> #include <linux/mmc/card.h> #include <linux/mmc/host.h> #include "mmc_queue.h" -#define MMC_QUEUE_EXIT (1 << 0) -#define MMC_QUEUE_SUSPENDED (1 << 1) +#define MMC_QUEUE_SUSPENDED (1 << 0) /* * Prepare a MMC request. Essentially, this means passing the @@ -59,7 +59,6 @@ static int mmc_queue_thread(void *d) { struct mmc_queue *mq = d; struct request_queue *q = mq->queue; - DECLARE_WAITQUEUE(wait, current); /* * Set iothread to ensure that we aren't put to sleep by @@ -67,12 +66,7 @@ static int mmc_queue_thread(void *d) */ current->flags |= PF_MEMALLOC|PF_NOFREEZE; - daemonize("mmcqd"); - - complete(&mq->thread_complete); - down(&mq->thread_sem); - add_wait_queue(&mq->thread_wq, &wait); do { struct request *req = NULL; @@ -84,7 +78,7 @@ static int mmc_queue_thread(void *d) spin_unlock_irq(q->queue_lock); if (!req) { - if (mq->flags & MMC_QUEUE_EXIT) + if (kthread_should_stop()) break; up(&mq->thread_sem); schedule(); @@ -95,10 +89,8 @@ static int mmc_queue_thread(void *d) mq->issue_fn(mq, req); } while (1); - remove_wait_queue(&mq->thread_wq, &wait); up(&mq->thread_sem); - complete_and_exit(&mq->thread_complete, 0); return 0; } @@ -111,9 +103,22 @@ static int mmc_queue_thread(void *d) static void mmc_request(request_queue_t *q) { struct mmc_queue *mq = q->queuedata; + struct request *req; + int ret; + + if (!mq) { + printk(KERN_ERR "MMC: killing requests for dead queue\n"); + while ((req = elv_next_request(q)) != NULL) { + do { + ret = end_that_request_chunk(req, 0, + req->current_nr_sectors << 9); + } while (ret); + } + return; + } if (!mq->req) - wake_up(&mq->thread_wq); + wake_up_process(mq->thread); } /** @@ -152,36 +157,40 @@ int mmc_init_queue(struct mmc_queue *mq, struct mmc_card *card, spinlock_t *lock GFP_KERNEL); if (!mq->sg) { ret = -ENOMEM; - goto cleanup; + goto cleanup_queue; } - init_completion(&mq->thread_complete); - init_waitqueue_head(&mq->thread_wq); init_MUTEX(&mq->thread_sem); - ret = kernel_thread(mmc_queue_thread, mq, CLONE_KERNEL); - if (ret >= 0) { - wait_for_completion(&mq->thread_complete); - init_completion(&mq->thread_complete); - ret = 0; - goto out; + mq->thread = kthread_run(mmc_queue_thread, mq, "mmcqd"); + if (IS_ERR(mq->thread)) { + ret = PTR_ERR(mq->thread); + goto free_sg; } - cleanup: + return 0; + + free_sg: kfree(mq->sg); mq->sg = NULL; - + cleanup_queue: blk_cleanup_queue(mq->queue); - out: return ret; } EXPORT_SYMBOL(mmc_init_queue); void mmc_cleanup_queue(struct mmc_queue *mq) { - mq->flags |= MMC_QUEUE_EXIT; - wake_up(&mq->thread_wq); - wait_for_completion(&mq->thread_complete); + request_queue_t *q = mq->queue; + unsigned long flags; + + /* Mark that we should start throwing out stragglers */ + spin_lock_irqsave(q->queue_lock, flags); + q->queuedata = NULL; + spin_unlock_irqrestore(q->queue_lock, flags); + + /* Then terminate our worker thread */ + kthread_stop(mq->thread); kfree(mq->sg); mq->sg = NULL; diff --git a/drivers/mmc/mmc_queue.h b/drivers/mmc/mmc_queue.h index 7182d2f69b4..c9f139e764f 100644 --- a/drivers/mmc/mmc_queue.h +++ b/drivers/mmc/mmc_queue.h @@ -6,8 +6,7 @@ struct task_struct; struct mmc_queue { struct mmc_card *card; - struct completion thread_complete; - wait_queue_head_t thread_wq; + struct task_struct *thread; struct semaphore thread_sem; unsigned int flags; struct request *req; diff --git a/drivers/mmc/mmci.c b/drivers/mmc/mmci.c index 828503c4ee6..e9b80e92026 100644 --- a/drivers/mmc/mmci.c +++ b/drivers/mmc/mmci.c @@ -443,7 +443,7 @@ static void mmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) } } -static struct mmc_host_ops mmci_ops = { +static const struct mmc_host_ops mmci_ops = { .request = mmci_request, .set_ios = mmci_set_ios, }; diff --git a/drivers/mmc/omap.c b/drivers/mmc/omap.c index d593ef342e7..435d331e772 100644 --- a/drivers/mmc/omap.c +++ b/drivers/mmc/omap.c @@ -38,7 +38,57 @@ #include <asm/arch/fpga.h> #include <asm/arch/tps65010.h> -#include "omap.h" +#define OMAP_MMC_REG_CMD 0x00 +#define OMAP_MMC_REG_ARGL 0x04 +#define OMAP_MMC_REG_ARGH 0x08 +#define OMAP_MMC_REG_CON 0x0c +#define OMAP_MMC_REG_STAT 0x10 +#define OMAP_MMC_REG_IE 0x14 +#define OMAP_MMC_REG_CTO 0x18 +#define OMAP_MMC_REG_DTO 0x1c +#define OMAP_MMC_REG_DATA 0x20 +#define OMAP_MMC_REG_BLEN 0x24 +#define OMAP_MMC_REG_NBLK 0x28 +#define OMAP_MMC_REG_BUF 0x2c +#define OMAP_MMC_REG_SDIO 0x34 +#define OMAP_MMC_REG_REV 0x3c +#define OMAP_MMC_REG_RSP0 0x40 +#define OMAP_MMC_REG_RSP1 0x44 +#define OMAP_MMC_REG_RSP2 0x48 +#define OMAP_MMC_REG_RSP3 0x4c +#define OMAP_MMC_REG_RSP4 0x50 +#define OMAP_MMC_REG_RSP5 0x54 +#define OMAP_MMC_REG_RSP6 0x58 +#define OMAP_MMC_REG_RSP7 0x5c +#define OMAP_MMC_REG_IOSR 0x60 +#define OMAP_MMC_REG_SYSC 0x64 +#define OMAP_MMC_REG_SYSS 0x68 + +#define OMAP_MMC_STAT_CARD_ERR (1 << 14) +#define OMAP_MMC_STAT_CARD_IRQ (1 << 13) +#define OMAP_MMC_STAT_OCR_BUSY (1 << 12) +#define OMAP_MMC_STAT_A_EMPTY (1 << 11) +#define OMAP_MMC_STAT_A_FULL (1 << 10) +#define OMAP_MMC_STAT_CMD_CRC (1 << 8) +#define OMAP_MMC_STAT_CMD_TOUT (1 << 7) +#define OMAP_MMC_STAT_DATA_CRC (1 << 6) +#define OMAP_MMC_STAT_DATA_TOUT (1 << 5) +#define OMAP_MMC_STAT_END_BUSY (1 << 4) +#define OMAP_MMC_STAT_END_OF_DATA (1 << 3) +#define OMAP_MMC_STAT_CARD_BUSY (1 << 2) +#define OMAP_MMC_STAT_END_OF_CMD (1 << 0) + +#define OMAP_MMC_READ(host, reg) __raw_readw((host)->virt_base + OMAP_MMC_REG_##reg) +#define OMAP_MMC_WRITE(host, reg, val) __raw_writew((val), (host)->virt_base + OMAP_MMC_REG_##reg) + +/* + * Command types + */ +#define OMAP_MMC_CMDTYPE_BC 0 +#define OMAP_MMC_CMDTYPE_BCR 1 +#define OMAP_MMC_CMDTYPE_AC 2 +#define OMAP_MMC_CMDTYPE_ADTC 3 + #define DRIVER_NAME "mmci-omap" #define RSP_TYPE(x) ((x) & ~(MMC_RSP_BUSY|MMC_RSP_OPCODE)) @@ -60,8 +110,9 @@ struct mmc_omap_host { unsigned char id; /* 16xx chips have 2 MMC blocks */ struct clk * iclk; struct clk * fclk; - struct resource *res; - void __iomem *base; + struct resource *mem_res; + void __iomem *virt_base; + unsigned int phys_base; int irq; unsigned char bus_mode; unsigned char hw_bus_mode; @@ -191,16 +242,16 @@ mmc_omap_start_command(struct mmc_omap_host *host, struct mmc_command *cmd) clk_enable(host->fclk); - OMAP_MMC_WRITE(host->base, CTO, 200); - OMAP_MMC_WRITE(host->base, ARGL, cmd->arg & 0xffff); - OMAP_MMC_WRITE(host->base, ARGH, cmd->arg >> 16); - OMAP_MMC_WRITE(host->base, IE, + OMAP_MMC_WRITE(host, CTO, 200); + OMAP_MMC_WRITE(host, ARGL, cmd->arg & 0xffff); + OMAP_MMC_WRITE(host, ARGH, cmd->arg >> 16); + OMAP_MMC_WRITE(host, IE, OMAP_MMC_STAT_A_EMPTY | OMAP_MMC_STAT_A_FULL | OMAP_MMC_STAT_CMD_CRC | OMAP_MMC_STAT_CMD_TOUT | OMAP_MMC_STAT_DATA_CRC | OMAP_MMC_STAT_DATA_TOUT | OMAP_MMC_STAT_END_OF_CMD | OMAP_MMC_STAT_CARD_ERR | OMAP_MMC_STAT_END_OF_DATA); - OMAP_MMC_WRITE(host->base, CMD, cmdreg); + OMAP_MMC_WRITE(host, CMD, cmdreg); } static void @@ -296,22 +347,22 @@ mmc_omap_cmd_done(struct mmc_omap_host *host, struct mmc_command *cmd) if (cmd->flags & MMC_RSP_136) { /* response type 2 */ cmd->resp[3] = - OMAP_MMC_READ(host->base, RSP0) | - (OMAP_MMC_READ(host->base, RSP1) << 16); + OMAP_MMC_READ(host, RSP0) | + (OMAP_MMC_READ(host, RSP1) << 16); cmd->resp[2] = - OMAP_MMC_READ(host->base, RSP2) | - (OMAP_MMC_READ(host->base, RSP3) << 16); + OMAP_MMC_READ(host, RSP2) | + (OMAP_MMC_READ(host, RSP3) << 16); cmd->resp[1] = - OMAP_MMC_READ(host->base, RSP4) | - (OMAP_MMC_READ(host->base, RSP5) << 16); + OMAP_MMC_READ(host, RSP4) | + (OMAP_MMC_READ(host, RSP5) << 16); cmd->resp[0] = - OMAP_MMC_READ(host->base, RSP6) | - (OMAP_MMC_READ(host->base, RSP7) << 16); + OMAP_MMC_READ(host, RSP6) | + (OMAP_MMC_READ(host, RSP7) << 16); } else { /* response types 1, 1b, 3, 4, 5, 6 */ cmd->resp[0] = - OMAP_MMC_READ(host->base, RSP6) | - (OMAP_MMC_READ(host->base, RSP7) << 16); + OMAP_MMC_READ(host, RSP6) | + (OMAP_MMC_READ(host, RSP7) << 16); } } @@ -354,9 +405,9 @@ mmc_omap_xfer_data(struct mmc_omap_host *host, int write) host->data->bytes_xfered += n; if (write) { - __raw_writesw(host->base + OMAP_MMC_REG_DATA, host->buffer, n); + __raw_writesw(host->virt_base + OMAP_MMC_REG_DATA, host->buffer, n); } else { - __raw_readsw(host->base + OMAP_MMC_REG_DATA, host->buffer, n); + __raw_readsw(host->virt_base + OMAP_MMC_REG_DATA, host->buffer, n); } } @@ -386,11 +437,11 @@ static irqreturn_t mmc_omap_irq(int irq, void *dev_id) int transfer_error; if (host->cmd == NULL && host->data == NULL) { - status = OMAP_MMC_READ(host->base, STAT); + status = OMAP_MMC_READ(host, STAT); dev_info(mmc_dev(host->mmc),"spurious irq 0x%04x\n", status); if (status != 0) { - OMAP_MMC_WRITE(host->base, STAT, status); - OMAP_MMC_WRITE(host->base, IE, 0); + OMAP_MMC_WRITE(host, STAT, status); + OMAP_MMC_WRITE(host, IE, 0); } return IRQ_HANDLED; } @@ -399,8 +450,8 @@ static irqreturn_t mmc_omap_irq(int irq, void *dev_id) end_transfer = 0; transfer_error = 0; - while ((status = OMAP_MMC_READ(host->base, STAT)) != 0) { - OMAP_MMC_WRITE(host->base, STAT, status); + while ((status = OMAP_MMC_READ(host, STAT)) != 0) { + OMAP_MMC_WRITE(host, STAT, status); #ifdef CONFIG_MMC_DEBUG dev_dbg(mmc_dev(host->mmc), "MMC IRQ %04x (CMD %d): ", status, host->cmd != NULL ? host->cmd->opcode : -1); @@ -470,8 +521,8 @@ static irqreturn_t mmc_omap_irq(int irq, void *dev_id) if (status & OMAP_MMC_STAT_CARD_ERR) { if (host->cmd && host->cmd->opcode == MMC_STOP_TRANSMISSION) { - u32 response = OMAP_MMC_READ(host->base, RSP6) - | (OMAP_MMC_READ(host->base, RSP7) << 16); + u32 response = OMAP_MMC_READ(host, RSP6) + | (OMAP_MMC_READ(host, RSP7) << 16); /* STOP sometimes sets must-ignore bits */ if (!(response & (R1_CC_ERROR | R1_ILLEGAL_COMMAND @@ -530,12 +581,6 @@ static void mmc_omap_switch_timer(unsigned long arg) schedule_work(&host->switch_work); } -/* FIXME: Handle card insertion and removal properly. Maybe use a mask - * for MMC state? */ -static void mmc_omap_switch_callback(unsigned long data, u8 mmc_mask) -{ -} - static void mmc_omap_switch_handler(void *data) { struct mmc_omap_host *host = (struct mmc_omap_host *) data; @@ -581,7 +626,7 @@ mmc_omap_prepare_dma(struct mmc_omap_host *host, struct mmc_data *data) int dst_port = 0; int sync_dev = 0; - data_addr = io_v2p((u32) host->base) + OMAP_MMC_REG_DATA; + data_addr = host->phys_base + OMAP_MMC_REG_DATA; frame = data->blksz; count = sg_dma_len(sg); @@ -642,7 +687,7 @@ mmc_omap_prepare_dma(struct mmc_omap_host *host, struct mmc_data *data) /* Max limit for DMA frame count is 0xffff */ BUG_ON(count > 0xffff); - OMAP_MMC_WRITE(host->base, BUF, buf); + OMAP_MMC_WRITE(host, BUF, buf); omap_set_dma_transfer_params(dma_ch, OMAP_DMA_DATA_TYPE_S16, frame, count, OMAP_DMA_SYNC_FRAME, sync_dev, 0); @@ -727,11 +772,11 @@ static inline void set_cmd_timeout(struct mmc_omap_host *host, struct mmc_reques { u16 reg; - reg = OMAP_MMC_READ(host->base, SDIO); + reg = OMAP_MMC_READ(host, SDIO); reg &= ~(1 << 5); - OMAP_MMC_WRITE(host->base, SDIO, reg); + OMAP_MMC_WRITE(host, SDIO, reg); /* Set maximum timeout */ - OMAP_MMC_WRITE(host->base, CTO, 0xff); + OMAP_MMC_WRITE(host, CTO, 0xff); } static inline void set_data_timeout(struct mmc_omap_host *host, struct mmc_request *req) @@ -745,14 +790,14 @@ static inline void set_data_timeout(struct mmc_omap_host *host, struct mmc_reque timeout = req->data->timeout_clks + req->data->timeout_ns / 500; /* Check if we need to use timeout multiplier register */ - reg = OMAP_MMC_READ(host->base, SDIO); + reg = OMAP_MMC_READ(host, SDIO); if (timeout > 0xffff) { reg |= (1 << 5); timeout /= 1024; } else reg &= ~(1 << 5); - OMAP_MMC_WRITE(host->base, SDIO, reg); - OMAP_MMC_WRITE(host->base, DTO, timeout); + OMAP_MMC_WRITE(host, SDIO, reg); + OMAP_MMC_WRITE(host, DTO, timeout); } static void @@ -764,19 +809,18 @@ mmc_omap_prepare_data(struct mmc_omap_host *host, struct mmc_request *req) host->data = data; if (data == NULL) { - OMAP_MMC_WRITE(host->base, BLEN, 0); - OMAP_MMC_WRITE(host->base, NBLK, 0); - OMAP_MMC_WRITE(host->base, BUF, 0); + OMAP_MMC_WRITE(host, BLEN, 0); + OMAP_MMC_WRITE(host, NBLK, 0); + OMAP_MMC_WRITE(host, BUF, 0); host->dma_in_use = 0; set_cmd_timeout(host, req); return; } - block_size = data->blksz; - OMAP_MMC_WRITE(host->base, NBLK, data->blocks - 1); - OMAP_MMC_WRITE(host->base, BLEN, block_size - 1); + OMAP_MMC_WRITE(host, NBLK, data->blocks - 1); + OMAP_MMC_WRITE(host, BLEN, block_size - 1); set_data_timeout(host, req); /* cope with calling layer confusion; it issues "single @@ -818,7 +862,7 @@ mmc_omap_prepare_data(struct mmc_omap_host *host, struct mmc_request *req) /* Revert to PIO? */ if (!use_dma) { - OMAP_MMC_WRITE(host->base, BUF, 0x1f1f); + OMAP_MMC_WRITE(host, BUF, 0x1f1f); host->total_bytes_left = data->blocks * block_size; host->sg_len = sg_len; mmc_omap_sg_to_buf(host); @@ -844,7 +888,6 @@ static void mmc_omap_request(struct mmc_host *mmc, struct mmc_request *req) static void innovator_fpga_socket_power(int on) { #if defined(CONFIG_MACH_OMAP_INNOVATOR) && defined(CONFIG_ARCH_OMAP15XX) - if (on) { fpga_write(fpga_read(OMAP1510_FPGA_POWER) | (1 << 3), OMAP1510_FPGA_POWER); @@ -870,8 +913,8 @@ static void mmc_omap_power(struct mmc_omap_host *host, int on) /* GPIO 4 of TPS65010 sends SD_EN signal */ tps65010_set_gpio_out_value(GPIO4, HIGH); else if (cpu_is_omap24xx()) { - u16 reg = OMAP_MMC_READ(host->base, CON); - OMAP_MMC_WRITE(host->base, CON, reg | (1 << 11)); + u16 reg = OMAP_MMC_READ(host, CON); + OMAP_MMC_WRITE(host, CON, reg | (1 << 11)); } else if (host->power_pin >= 0) omap_set_gpio_dataout(host->power_pin, 1); @@ -883,8 +926,8 @@ static void mmc_omap_power(struct mmc_omap_host *host, int on) else if (machine_is_omap_h3()) tps65010_set_gpio_out_value(GPIO4, LOW); else if (cpu_is_omap24xx()) { - u16 reg = OMAP_MMC_READ(host->base, CON); - OMAP_MMC_WRITE(host->base, CON, reg & ~(1 << 11)); + u16 reg = OMAP_MMC_READ(host, CON); + OMAP_MMC_WRITE(host, CON, reg & ~(1 << 11)); } else if (host->power_pin >= 0) omap_set_gpio_dataout(host->power_pin, 0); @@ -926,7 +969,7 @@ static void mmc_omap_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) case MMC_POWER_UP: case MMC_POWER_ON: mmc_omap_power(host, 1); - dsor |= 1<<11; + dsor |= 1 << 11; break; } @@ -940,14 +983,14 @@ static void mmc_omap_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) * which results in the while loop below getting stuck. * Writing to the CON register twice seems to do the trick. */ for (i = 0; i < 2; i++) - OMAP_MMC_WRITE(host->base, CON, dsor); + OMAP_MMC_WRITE(host, CON, dsor); if (ios->power_mode == MMC_POWER_UP) { /* Send clock cycles, poll completion */ - OMAP_MMC_WRITE(host->base, IE, 0); - OMAP_MMC_WRITE(host->base, STAT, 0xffff); - OMAP_MMC_WRITE(host->base, CMD, 1<<7); - while (0 == (OMAP_MMC_READ(host->base, STAT) & 1)); - OMAP_MMC_WRITE(host->base, STAT, 1); + OMAP_MMC_WRITE(host, IE, 0); + OMAP_MMC_WRITE(host, STAT, 0xffff); + OMAP_MMC_WRITE(host, CMD, 1 << 7); + while ((OMAP_MMC_READ(host, STAT) & 1) == 0); + OMAP_MMC_WRITE(host, STAT, 1); } clk_disable(host->fclk); } @@ -959,7 +1002,7 @@ static int mmc_omap_get_ro(struct mmc_host *mmc) return host->wp_pin && omap_get_gpio_datain(host->wp_pin); } -static struct mmc_host_ops mmc_omap_ops = { +static const struct mmc_host_ops mmc_omap_ops = { .request = mmc_omap_request, .set_ios = mmc_omap_set_ios, .get_ro = mmc_omap_get_ro, @@ -970,25 +1013,29 @@ static int __init mmc_omap_probe(struct platform_device *pdev) struct omap_mmc_conf *minfo = pdev->dev.platform_data; struct mmc_host *mmc; struct mmc_omap_host *host = NULL; - struct resource *r; + struct resource *res; int ret = 0; int irq; - - r = platform_get_resource(pdev, IORESOURCE_MEM, 0); + + if (minfo == NULL) { + dev_err(&pdev->dev, "platform data missing\n"); + return -ENXIO; + } + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); irq = platform_get_irq(pdev, 0); - if (!r || irq < 0) + if (res == NULL || irq < 0) return -ENXIO; - r = request_mem_region(pdev->resource[0].start, - pdev->resource[0].end - pdev->resource[0].start + 1, - pdev->name); - if (!r) + res = request_mem_region(res->start, res->end - res->start + 1, + pdev->name); + if (res == NULL) return -EBUSY; mmc = mmc_alloc_host(sizeof(struct mmc_omap_host), &pdev->dev); - if (!mmc) { + if (mmc == NULL) { ret = -ENOMEM; - goto out; + goto err_free_mem_region; } host = mmc_priv(mmc); @@ -1000,13 +1047,13 @@ static int __init mmc_omap_probe(struct platform_device *pdev) host->dma_timer.data = (unsigned long) host; host->id = pdev->id; - host->res = r; + host->mem_res = res; host->irq = irq; if (cpu_is_omap24xx()) { host->iclk = clk_get(&pdev->dev, "mmc_ick"); if (IS_ERR(host->iclk)) - goto out; + goto err_free_mmc_host; clk_enable(host->iclk); } @@ -1017,7 +1064,7 @@ static int __init mmc_omap_probe(struct platform_device *pdev) if (IS_ERR(host->fclk)) { ret = PTR_ERR(host->fclk); - goto out; + goto err_free_iclk; } /* REVISIT: @@ -1030,14 +1077,15 @@ static int __init mmc_omap_probe(struct platform_device *pdev) host->use_dma = 1; host->dma_ch = -1; - host->irq = pdev->resource[1].start; - host->base = (void __iomem*)IO_ADDRESS(r->start); + host->irq = irq; + host->phys_base = host->mem_res->start; + host->virt_base = (void __iomem *) IO_ADDRESS(host->phys_base); mmc->ops = &mmc_omap_ops; mmc->f_min = 400000; mmc->f_max = 24000000; - mmc->ocr_avail = MMC_VDD_32_33|MMC_VDD_33_34; - mmc->caps = MMC_CAP_BYTEBLOCK; + mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34; + mmc->caps = MMC_CAP_MULTIWRITE | MMC_CAP_BYTEBLOCK; if (minfo->wire4) mmc->caps |= MMC_CAP_4_BIT_DATA; @@ -1055,20 +1103,18 @@ static int __init mmc_omap_probe(struct platform_device *pdev) if ((ret = omap_request_gpio(host->power_pin)) != 0) { dev_err(mmc_dev(host->mmc), "Unable to get GPIO pin for MMC power\n"); - goto out; + goto err_free_fclk; } omap_set_gpio_direction(host->power_pin, 0); } ret = request_irq(host->irq, mmc_omap_irq, 0, DRIVER_NAME, host); if (ret) - goto out; + goto err_free_power_gpio; host->dev = &pdev->dev; platform_set_drvdata(pdev, host); - mmc_add_host(mmc); - if (host->switch_pin >= 0) { INIT_WORK(&host->switch_work, mmc_omap_switch_handler, host); init_timer(&host->switch_timer); @@ -1106,10 +1152,11 @@ static int __init mmc_omap_probe(struct platform_device *pdev) schedule_work(&host->switch_work); } -no_switch: + mmc_add_host(mmc); + return 0; -out: +no_switch: /* FIXME: Free other resources too. */ if (host) { if (host->iclk && !IS_ERR(host->iclk)) @@ -1118,6 +1165,20 @@ out: clk_put(host->fclk); mmc_free_host(host->mmc); } +err_free_power_gpio: + if (host->power_pin >= 0) + omap_free_gpio(host->power_pin); +err_free_fclk: + clk_put(host->fclk); +err_free_iclk: + if (host->iclk != NULL) { + clk_disable(host->iclk); + clk_put(host->iclk); + } +err_free_mmc_host: + mmc_free_host(host->mmc); +err_free_mem_region: + release_mem_region(res->start, res->end - res->start + 1); return ret; } @@ -1127,30 +1188,31 @@ static int mmc_omap_remove(struct platform_device *pdev) platform_set_drvdata(pdev, NULL); - if (host) { - mmc_remove_host(host->mmc); - free_irq(host->irq, host); - - if (host->power_pin >= 0) - omap_free_gpio(host->power_pin); - if (host->switch_pin >= 0) { - device_remove_file(&pdev->dev, &dev_attr_enable_poll); - device_remove_file(&pdev->dev, &dev_attr_cover_switch); - free_irq(OMAP_GPIO_IRQ(host->switch_pin), host); - omap_free_gpio(host->switch_pin); - host->switch_pin = -1; - del_timer_sync(&host->switch_timer); - flush_scheduled_work(); - } - if (host->iclk && !IS_ERR(host->iclk)) - clk_put(host->iclk); - if (host->fclk && !IS_ERR(host->fclk)) - clk_put(host->fclk); - mmc_free_host(host->mmc); + BUG_ON(host == NULL); + + mmc_remove_host(host->mmc); + free_irq(host->irq, host); + + if (host->power_pin >= 0) + omap_free_gpio(host->power_pin); + if (host->switch_pin >= 0) { + device_remove_file(&pdev->dev, &dev_attr_enable_poll); + device_remove_file(&pdev->dev, &dev_attr_cover_switch); + free_irq(OMAP_GPIO_IRQ(host->switch_pin), host); + omap_free_gpio(host->switch_pin); + host->switch_pin = -1; + del_timer_sync(&host->switch_timer); + flush_scheduled_work(); } + if (host->iclk && !IS_ERR(host->iclk)) + clk_put(host->iclk); + if (host->fclk && !IS_ERR(host->fclk)) + clk_put(host->fclk); release_mem_region(pdev->resource[0].start, - pdev->resource[0].end - pdev->resource[0].start + 1); + pdev->resource[0].end - pdev->resource[0].start + 1); + + mmc_free_host(host->mmc); return 0; } diff --git a/drivers/mmc/omap.h b/drivers/mmc/omap.h deleted file mode 100644 index c954d355a5e..00000000000 --- a/drivers/mmc/omap.h +++ /dev/null @@ -1,55 +0,0 @@ -#ifndef DRIVERS_MEDIA_MMC_OMAP_H -#define DRIVERS_MEDIA_MMC_OMAP_H - -#define OMAP_MMC_REG_CMD 0x00 -#define OMAP_MMC_REG_ARGL 0x04 -#define OMAP_MMC_REG_ARGH 0x08 -#define OMAP_MMC_REG_CON 0x0c -#define OMAP_MMC_REG_STAT 0x10 -#define OMAP_MMC_REG_IE 0x14 -#define OMAP_MMC_REG_CTO 0x18 -#define OMAP_MMC_REG_DTO 0x1c -#define OMAP_MMC_REG_DATA 0x20 -#define OMAP_MMC_REG_BLEN 0x24 -#define OMAP_MMC_REG_NBLK 0x28 -#define OMAP_MMC_REG_BUF 0x2c -#define OMAP_MMC_REG_SDIO 0x34 -#define OMAP_MMC_REG_REV 0x3c -#define OMAP_MMC_REG_RSP0 0x40 -#define OMAP_MMC_REG_RSP1 0x44 -#define OMAP_MMC_REG_RSP2 0x48 -#define OMAP_MMC_REG_RSP3 0x4c -#define OMAP_MMC_REG_RSP4 0x50 -#define OMAP_MMC_REG_RSP5 0x54 -#define OMAP_MMC_REG_RSP6 0x58 -#define OMAP_MMC_REG_RSP7 0x5c -#define OMAP_MMC_REG_IOSR 0x60 -#define OMAP_MMC_REG_SYSC 0x64 -#define OMAP_MMC_REG_SYSS 0x68 - -#define OMAP_MMC_STAT_CARD_ERR (1 << 14) -#define OMAP_MMC_STAT_CARD_IRQ (1 << 13) -#define OMAP_MMC_STAT_OCR_BUSY (1 << 12) -#define OMAP_MMC_STAT_A_EMPTY (1 << 11) -#define OMAP_MMC_STAT_A_FULL (1 << 10) -#define OMAP_MMC_STAT_CMD_CRC (1 << 8) -#define OMAP_MMC_STAT_CMD_TOUT (1 << 7) -#define OMAP_MMC_STAT_DATA_CRC (1 << 6) -#define OMAP_MMC_STAT_DATA_TOUT (1 << 5) -#define OMAP_MMC_STAT_END_BUSY (1 << 4) -#define OMAP_MMC_STAT_END_OF_DATA (1 << 3) -#define OMAP_MMC_STAT_CARD_BUSY (1 << 2) -#define OMAP_MMC_STAT_END_OF_CMD (1 << 0) - -#define OMAP_MMC_READ(base, reg) __raw_readw((base) + OMAP_MMC_REG_##reg) -#define OMAP_MMC_WRITE(base, reg, val) __raw_writew((val), (base) + OMAP_MMC_REG_##reg) - -/* - * Command types - */ -#define OMAP_MMC_CMDTYPE_BC 0 -#define OMAP_MMC_CMDTYPE_BCR 1 -#define OMAP_MMC_CMDTYPE_AC 2 -#define OMAP_MMC_CMDTYPE_ADTC 3 - -#endif diff --git a/drivers/mmc/pxamci.c b/drivers/mmc/pxamci.c index a526698b8c9..471e9f4e053 100644 --- a/drivers/mmc/pxamci.c +++ b/drivers/mmc/pxamci.c @@ -393,7 +393,7 @@ static void pxamci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) host->clkrt, host->cmdat); } -static struct mmc_host_ops pxamci_ops = { +static const struct mmc_host_ops pxamci_ops = { .request = pxamci_request, .get_ro = pxamci_get_ro, .set_ios = pxamci_set_ios, diff --git a/drivers/mmc/sdhci.c b/drivers/mmc/sdhci.c index 9a7d39b7cdb..cd98117632d 100644 --- a/drivers/mmc/sdhci.c +++ b/drivers/mmc/sdhci.c @@ -616,6 +616,7 @@ static void sdhci_finish_command(struct sdhci_host *host) static void sdhci_set_clock(struct sdhci_host *host, unsigned int clock) { int div; + u8 ctrl; u16 clk; unsigned long timeout; @@ -624,6 +625,13 @@ static void sdhci_set_clock(struct sdhci_host *host, unsigned int clock) writew(0, host->ioaddr + SDHCI_CLOCK_CONTROL); + ctrl = readb(host->ioaddr + SDHCI_HOST_CONTROL); + if (clock > 25000000) + ctrl |= SDHCI_CTRL_HISPD; + else + ctrl &= ~SDHCI_CTRL_HISPD; + writeb(ctrl, host->ioaddr + SDHCI_HOST_CONTROL); + if (clock == 0) goto out; @@ -784,7 +792,7 @@ static int sdhci_get_ro(struct mmc_host *mmc) return !(present & SDHCI_WRITE_PROTECT); } -static struct mmc_host_ops sdhci_ops = { +static const struct mmc_host_ops sdhci_ops = { .request = sdhci_request, .set_ios = sdhci_set_ios, .get_ro = sdhci_get_ro, @@ -1291,6 +1299,13 @@ static int __devinit sdhci_probe_slot(struct pci_dev *pdev, int slot) else if (caps & SDHCI_CAN_VDD_180) mmc->ocr_avail |= MMC_VDD_17_18|MMC_VDD_18_19; + if ((host->max_clk > 25000000) && !(caps & SDHCI_CAN_DO_HISPD)) { + printk(KERN_ERR "%s: Controller reports > 25 MHz base clock," + " but no high speed support.\n", + host->slot_descr); + mmc->f_max = 25000000; + } + if (mmc->ocr_avail == 0) { printk(KERN_ERR "%s: Hardware doesn't report any " "support voltages.\n", host->slot_descr); diff --git a/drivers/mmc/sdhci.h b/drivers/mmc/sdhci.h index 72a67937afe..f9d1a0a6f03 100644 --- a/drivers/mmc/sdhci.h +++ b/drivers/mmc/sdhci.h @@ -71,6 +71,7 @@ #define SDHCI_HOST_CONTROL 0x28 #define SDHCI_CTRL_LED 0x01 #define SDHCI_CTRL_4BITBUS 0x02 +#define SDHCI_CTRL_HISPD 0x04 #define SDHCI_POWER_CONTROL 0x29 #define SDHCI_POWER_ON 0x01 @@ -138,6 +139,7 @@ #define SDHCI_CLOCK_BASE_SHIFT 8 #define SDHCI_MAX_BLOCK_MASK 0x00030000 #define SDHCI_MAX_BLOCK_SHIFT 16 +#define SDHCI_CAN_DO_HISPD 0x00200000 #define SDHCI_CAN_DO_DMA 0x00400000 #define SDHCI_CAN_VDD_330 0x01000000 #define SDHCI_CAN_VDD_300 0x02000000 diff --git a/drivers/mmc/wbsd.c b/drivers/mmc/wbsd.c index 682e62b0b09..7a282672f8e 100644 --- a/drivers/mmc/wbsd.c +++ b/drivers/mmc/wbsd.c @@ -1021,7 +1021,7 @@ static int wbsd_get_ro(struct mmc_host *mmc) return csr & WBSD_WRPT; } -static struct mmc_host_ops wbsd_ops = { +static const struct mmc_host_ops wbsd_ops = { .request = wbsd_request, .set_ios = wbsd_set_ios, .get_ro = wbsd_get_ro, diff --git a/include/linux/mmc/card.h b/include/linux/mmc/card.h index 991a37382a2..d0e6a549761 100644 --- a/include/linux/mmc/card.h +++ b/include/linux/mmc/card.h @@ -39,6 +39,10 @@ struct mmc_csd { write_misalign:1; }; +struct mmc_ext_csd { + unsigned int hs_max_dtr; +}; + struct sd_scr { unsigned char sda_vsn; unsigned char bus_widths; @@ -46,6 +50,10 @@ struct sd_scr { #define SD_SCR_BUS_WIDTH_4 (1<<2) }; +struct sd_switch_caps { + unsigned int hs_max_dtr; +}; + struct mmc_host; /* @@ -62,12 +70,15 @@ struct mmc_card { #define MMC_STATE_BAD (1<<2) /* unrecognised device */ #define MMC_STATE_SDCARD (1<<3) /* is an SD card */ #define MMC_STATE_READONLY (1<<4) /* card is read-only */ +#define MMC_STATE_HIGHSPEED (1<<5) /* card is in high speed mode */ u32 raw_cid[4]; /* raw card CID */ u32 raw_csd[4]; /* raw card CSD */ u32 raw_scr[2]; /* raw card SCR */ struct mmc_cid cid; /* card identification */ struct mmc_csd csd; /* card specific */ + struct mmc_ext_csd ext_csd; /* mmc v4 extended card specific */ struct sd_scr scr; /* extra SD information */ + struct sd_switch_caps sw_caps; /* switch (CMD6) caps */ }; #define mmc_card_present(c) ((c)->state & MMC_STATE_PRESENT) @@ -75,12 +86,14 @@ struct mmc_card { #define mmc_card_bad(c) ((c)->state & MMC_STATE_BAD) #define mmc_card_sd(c) ((c)->state & MMC_STATE_SDCARD) #define mmc_card_readonly(c) ((c)->state & MMC_STATE_READONLY) +#define mmc_card_highspeed(c) ((c)->state & MMC_STATE_HIGHSPEED) #define mmc_card_set_present(c) ((c)->state |= MMC_STATE_PRESENT) #define mmc_card_set_dead(c) ((c)->state |= MMC_STATE_DEAD) #define mmc_card_set_bad(c) ((c)->state |= MMC_STATE_BAD) #define mmc_card_set_sd(c) ((c)->state |= MMC_STATE_SDCARD) #define mmc_card_set_readonly(c) ((c)->state |= MMC_STATE_READONLY) +#define mmc_card_set_highspeed(c) ((c)->state |= MMC_STATE_HIGHSPEED) #define mmc_card_name(c) ((c)->cid.prod_name) #define mmc_card_id(c) ((c)->dev.bus_id) diff --git a/include/linux/mmc/protocol.h b/include/linux/mmc/protocol.h index 08dec8d9e70..2dce60c43f4 100644 --- a/include/linux/mmc/protocol.h +++ b/include/linux/mmc/protocol.h @@ -25,14 +25,16 @@ #ifndef MMC_MMC_PROTOCOL_H #define MMC_MMC_PROTOCOL_H -/* Standard MMC commands (3.1) type argument response */ +/* Standard MMC commands (4.1) type argument response */ /* class 1 */ #define MMC_GO_IDLE_STATE 0 /* bc */ #define MMC_SEND_OP_COND 1 /* bcr [31:0] OCR R3 */ #define MMC_ALL_SEND_CID 2 /* bcr R2 */ #define MMC_SET_RELATIVE_ADDR 3 /* ac [31:16] RCA R1 */ #define MMC_SET_DSR 4 /* bc [31:16] RCA */ +#define MMC_SWITCH 6 /* ac [31:0] See below R1b */ #define MMC_SELECT_CARD 7 /* ac [31:16] RCA R1 */ +#define MMC_SEND_EXT_CSD 8 /* adtc R1 */ #define MMC_SEND_CSD 9 /* ac [31:16] RCA R2 */ #define MMC_SEND_CID 10 /* ac [31:16] RCA R2 */ #define MMC_READ_DAT_UNTIL_STOP 11 /* adtc [31:0] dadr R1 */ @@ -80,6 +82,7 @@ /* class 8 */ /* This is basically the same command as for MMC with some quirks. */ #define SD_SEND_RELATIVE_ADDR 3 /* bcr R6 */ +#define SD_SWITCH 6 /* adtc [31:0] See below R1 */ /* Application commands */ #define SD_APP_SET_BUS_WIDTH 6 /* ac [1:0] bus width R1 */ @@ -88,6 +91,30 @@ #define SD_APP_SEND_SCR 51 /* adtc R1 */ /* + * MMC_SWITCH argument format: + * + * [31:26] Always 0 + * [25:24] Access Mode + * [23:16] Location of target Byte in EXT_CSD + * [15:08] Value Byte + * [07:03] Always 0 + * [02:00] Command Set + */ + +/* + * SD_SWITCH argument format: + * + * [31] Check (0) or switch (1) + * [30:24] Reserved (0) + * [23:20] Function group 6 + * [19:16] Function group 5 + * [15:12] Function group 4 + * [11:8] Function group 3 + * [7:4] Function group 2 + * [3:0] Function group 1 + */ + +/* MMC status in R1 Type e : error bit @@ -230,13 +257,54 @@ struct _mmc_csd { #define CSD_STRUCT_VER_1_0 0 /* Valid for system specification 1.0 - 1.2 */ #define CSD_STRUCT_VER_1_1 1 /* Valid for system specification 1.4 - 2.2 */ -#define CSD_STRUCT_VER_1_2 2 /* Valid for system specification 3.1 */ +#define CSD_STRUCT_VER_1_2 2 /* Valid for system specification 3.1 - 3.2 - 3.31 - 4.0 - 4.1 */ +#define CSD_STRUCT_EXT_CSD 3 /* Version is coded in CSD_STRUCTURE in EXT_CSD */ #define CSD_SPEC_VER_0 0 /* Implements system specification 1.0 - 1.2 */ #define CSD_SPEC_VER_1 1 /* Implements system specification 1.4 */ #define CSD_SPEC_VER_2 2 /* Implements system specification 2.0 - 2.2 */ -#define CSD_SPEC_VER_3 3 /* Implements system specification 3.1 */ +#define CSD_SPEC_VER_3 3 /* Implements system specification 3.1 - 3.2 - 3.31 */ +#define CSD_SPEC_VER_4 4 /* Implements system specification 4.0 - 4.1 */ + +/* + * EXT_CSD fields + */ + +#define EXT_CSD_BUS_WIDTH 183 /* R/W */ +#define EXT_CSD_HS_TIMING 185 /* R/W */ +#define EXT_CSD_CARD_TYPE 196 /* RO */ + +/* + * EXT_CSD field definitions + */ + +#define EXT_CSD_CMD_SET_NORMAL (1<<0) +#define EXT_CSD_CMD_SET_SECURE (1<<1) +#define EXT_CSD_CMD_SET_CPSECURE (1<<2) + +#define EXT_CSD_CARD_TYPE_26 (1<<0) /* Card can run at 26MHz */ +#define EXT_CSD_CARD_TYPE_52 (1<<1) /* Card can run at 52MHz */ + +#define EXT_CSD_BUS_WIDTH_1 0 /* Card is in 1 bit mode */ +#define EXT_CSD_BUS_WIDTH_4 1 /* Card is in 4 bit mode */ +#define EXT_CSD_BUS_WIDTH_8 2 /* Card is in 8 bit mode */ + +/* + * MMC_SWITCH access modes + */ + +#define MMC_SWITCH_MODE_CMD_SET 0x00 /* Change the command set */ +#define MMC_SWITCH_MODE_SET_BITS 0x01 /* Set bits which are 1 in value */ +#define MMC_SWITCH_MODE_CLEAR_BITS 0x02 /* Clear bits which are 1 in value */ +#define MMC_SWITCH_MODE_WRITE_BYTE 0x03 /* Set target to value */ + +/* + * SCR field definitions + */ +#define SCR_SPEC_VER_0 0 /* Implements system specification 1.0 - 1.01 */ +#define SCR_SPEC_VER_1 1 /* Implements system specification 1.10 */ +#define SCR_SPEC_VER_2 2 /* Implements system specification 2.00 */ /* * SD bus widths |