diff options
| -rw-r--r-- | Documentation/devicetree/bindings/mtd/atmel-nand.txt | 40 | ||||
| -rw-r--r-- | drivers/mtd/nand/atmel_nand.c | 52 |
2 files changed, 90 insertions, 2 deletions
diff --git a/Documentation/devicetree/bindings/mtd/atmel-nand.txt b/Documentation/devicetree/bindings/mtd/atmel-nand.txt index a20069502f5..d555421ea49 100644 --- a/Documentation/devicetree/bindings/mtd/atmel-nand.txt +++ b/Documentation/devicetree/bindings/mtd/atmel-nand.txt @@ -3,7 +3,9 @@ Atmel NAND flash Required properties: - compatible : "atmel,at91rm9200-nand". - reg : should specify localbus address and size used for the chip, - and if availlable the ECC. + and hardware ECC controller if available. + If the hardware ECC is PMECC, it should contain address and size for + PMECC, PMECC Error Location controller and ROM which has lookup tables. - atmel,nand-addr-offset : offset for the address latch. - atmel,nand-cmd-offset : offset for the command latch. - #address-cells, #size-cells : Must be present if the device has sub-nodes @@ -16,6 +18,15 @@ Optional properties: - nand-ecc-mode : String, operation mode of the NAND ecc mode, soft by default. Supported values are: "none", "soft", "hw", "hw_syndrome", "hw_oob_first", "soft_bch". +- atmel,has-pmecc : boolean to enable Programmable Multibit ECC hardware. + Only supported by at91sam9x5 or later sam9 product. +- atmel,pmecc-cap : error correct capability for Programmable Multibit ECC + Controller. Supported values are: 2, 4, 8, 12, 24. +- atmel,pmecc-sector-size : sector size for ECC computation. Supported values + are: 512, 1024. +- atmel,pmecc-lookup-table-offset : includes two offsets of lookup table in ROM + for different sector size. First one is for sector size 512, the next is for + sector size 1024. - nand-bus-width : 8 or 16 bus width if not present 8 - nand-on-flash-bbt: boolean to enable on flash bbt option if not present false @@ -39,3 +50,30 @@ nand0: nand@40000000,0 { ... }; }; + +/* for PMECC supported chips */ +nand0: nand@40000000 { + compatible = "atmel,at91rm9200-nand"; + #address-cells = <1>; + #size-cells = <1>; + reg = < 0x40000000 0x10000000 /* bus addr & size */ + 0xffffe000 0x00000600 /* PMECC addr & size */ + 0xffffe600 0x00000200 /* PMECC ERRLOC addr & size */ + 0x00100000 0x00100000 /* ROM addr & size */ + >; + atmel,nand-addr-offset = <21>; /* ale */ + atmel,nand-cmd-offset = <22>; /* cle */ + nand-on-flash-bbt; + nand-ecc-mode = "hw"; + atmel,has-pmecc; /* enable PMECC */ + atmel,pmecc-cap = <2>; + atmel,pmecc-sector-size = <512>; + atmel,pmecc-lookup-table-offset = <0x8000 0x10000>; + gpios = <&pioD 5 0 /* rdy */ + &pioD 4 0 /* nce */ + 0 /* cd */ + >; + partition@0 { + ... + }; +}; diff --git a/drivers/mtd/nand/atmel_nand.c b/drivers/mtd/nand/atmel_nand.c index 7a41a04beb8..b97ad9f78d3 100644 --- a/drivers/mtd/nand/atmel_nand.c +++ b/drivers/mtd/nand/atmel_nand.c @@ -93,6 +93,11 @@ struct atmel_nand_host { struct completion comp; struct dma_chan *dma_chan; + + bool has_pmecc; + u8 pmecc_corr_cap; + u16 pmecc_sector_size; + u32 pmecc_lookup_table_offset; }; static int cpu_has_dma(void) @@ -481,7 +486,8 @@ static void atmel_nand_hwctl(struct mtd_info *mtd, int mode) static int __devinit atmel_of_init_port(struct atmel_nand_host *host, struct device_node *np) { - u32 val; + u32 val, table_offset; + u32 offset[2]; int ecc_mode; struct atmel_nand_data *board = &host->board; enum of_gpio_flags flags; @@ -517,6 +523,50 @@ static int __devinit atmel_of_init_port(struct atmel_nand_host *host, board->enable_pin = of_get_gpio(np, 1); board->det_pin = of_get_gpio(np, 2); + host->has_pmecc = of_property_read_bool(np, "atmel,has-pmecc"); + + if (!(board->ecc_mode == NAND_ECC_HW) || !host->has_pmecc) + return 0; /* Not using PMECC */ + + /* use PMECC, get correction capability, sector size and lookup + * table offset. + */ + if (of_property_read_u32(np, "atmel,pmecc-cap", &val) != 0) { + dev_err(host->dev, "Cannot decide PMECC Capability\n"); + return -EINVAL; + } else if ((val != 2) && (val != 4) && (val != 8) && (val != 12) && + (val != 24)) { + dev_err(host->dev, + "Unsupported PMECC correction capability: %d; should be 2, 4, 8, 12 or 24\n", + val); + return -EINVAL; + } + host->pmecc_corr_cap = (u8)val; + + if (of_property_read_u32(np, "atmel,pmecc-sector-size", &val) != 0) { + dev_err(host->dev, "Cannot decide PMECC Sector Size\n"); + return -EINVAL; + } else if ((val != 512) && (val != 1024)) { + dev_err(host->dev, + "Unsupported PMECC sector size: %d; should be 512 or 1024 bytes\n", + val); + return -EINVAL; + } + host->pmecc_sector_size = (u16)val; + + if (of_property_read_u32_array(np, "atmel,pmecc-lookup-table-offset", + offset, 2) != 0) { + dev_err(host->dev, "Cannot get PMECC lookup table offset\n"); + return -EINVAL; + } + table_offset = host->pmecc_sector_size == 512 ? offset[0] : offset[1]; + + if (!table_offset) { + dev_err(host->dev, "Invalid PMECC lookup table offset\n"); + return -EINVAL; + } + host->pmecc_lookup_table_offset = table_offset; + return 0; } #else |