summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--Documentation/feature-removal-schedule.txt11
-rw-r--r--Documentation/hwmon/abituguru32
-rw-r--r--Documentation/i2c/busses/i2c-sis96x4
-rw-r--r--MAINTAINERS14
-rw-r--r--drivers/hwmon/abituguru.c21
-rw-r--r--drivers/i2c/algos/i2c-algo-bit.c4
-rw-r--r--drivers/i2c/algos/i2c-algo-ite.c4
-rw-r--r--drivers/i2c/algos/i2c-algo-pca.c6
-rw-r--r--drivers/i2c/algos/i2c-algo-pcf.c8
-rw-r--r--drivers/i2c/algos/i2c-algo-sibyte.c4
-rw-r--r--drivers/i2c/busses/i2c-iop3xx.c17
-rw-r--r--drivers/i2c/busses/i2c-iop3xx.h2
-rw-r--r--drivers/i2c/busses/i2c-powermac.c4
-rw-r--r--drivers/i2c/busses/scx200_acb.c20
-rw-r--r--drivers/i2c/chips/pca9539.c12
-rw-r--r--drivers/i2c/i2c-core.c4
-rw-r--r--include/linux/i2c.h2
17 files changed, 118 insertions, 51 deletions
diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt
index 47d714d7082..9d3a0775a11 100644
--- a/Documentation/feature-removal-schedule.txt
+++ b/Documentation/feature-removal-schedule.txt
@@ -247,3 +247,14 @@ Why: The interrupt related SA_* flags are replaced by IRQF_* to move them
Who: Thomas Gleixner <tglx@linutronix.de>
---------------------------
+
+What: i2c-ite and i2c-algo-ite drivers
+When: September 2006
+Why: These drivers never compiled since they were added to the kernel
+ tree 5 years ago. This feature removal can be reevaluated if
+ someone shows interest in the drivers, fixes them and takes over
+ maintenance.
+ http://marc.theaimsgroup.com/?l=linux-mips&m=115040510817448
+Who: Jean Delvare <khali@linux-fr.org>
+
+---------------------------
diff --git a/Documentation/hwmon/abituguru b/Documentation/hwmon/abituguru
index 69cdb527d58..b2c0d61b39a 100644
--- a/Documentation/hwmon/abituguru
+++ b/Documentation/hwmon/abituguru
@@ -2,13 +2,36 @@ Kernel driver abituguru
=======================
Supported chips:
- * Abit uGuru (Hardware Monitor part only)
+ * Abit uGuru revision 1-3 (Hardware Monitor part only)
Prefix: 'abituguru'
Addresses scanned: ISA 0x0E0
Datasheet: Not available, this driver is based on reverse engineering.
A "Datasheet" has been written based on the reverse engineering it
should be available in the same dir as this file under the name
abituguru-datasheet.
+ Note:
+ The uGuru is a microcontroller with onboard firmware which programs
+ it to behave as a hwmon IC. There are many different revisions of the
+ firmware and thus effectivly many different revisions of the uGuru.
+ Below is an incomplete list with which revisions are used for which
+ Motherboards:
+ uGuru 1.00 ~ 1.24 (AI7, KV8-MAX3, AN7) (1)
+ uGuru 2.0.0.0 ~ 2.0.4.2 (KV8-PRO)
+ uGuru 2.1.0.0 ~ 2.1.2.8 (AS8, AV8, AA8, AG8, AA8XE, AX8)
+ uGuru 2.2.0.0 ~ 2.2.0.6 (AA8 Fatal1ty)
+ uGuru 2.3.0.0 ~ 2.3.0.9 (AN8)
+ uGuru 3.0.0.0 ~ 3.0.1.2 (AW8, AL8, NI8)
+ uGuru 4.xxxxx? (AT8 32X) (2)
+ 1) For revisions 2 and 3 uGuru's the driver can autodetect the
+ sensortype (Volt or Temp) for bank1 sensors, for revision 1 uGuru's
+ this doesnot always work. For these uGuru's the autodection can
+ be overriden with the bank1_types module param. For all 3 known
+ revison 1 motherboards the correct use of this param is:
+ bank1_types=1,1,0,0,0,0,0,2,0,0,0,0,2,0,0,1
+ You may also need to specify the fan_sensors option for these boards
+ fan_sensors=5
+ 2) The current version of the abituguru driver is known to NOT work
+ on these Motherboards
Authors:
Hans de Goede <j.w.r.degoede@hhs.nl>,
@@ -22,6 +45,11 @@ Module Parameters
* force: bool Force detection. Note this parameter only causes the
detection to be skipped, if the uGuru can't be read
the module initialization (insmod) will still fail.
+* bank1_types: int[] Bank1 sensortype autodetection override:
+ -1 autodetect (default)
+ 0 volt sensor
+ 1 temp sensor
+ 2 not connected
* fan_sensors: int Tell the driver how many fan speed sensors there are
on your motherboard. Default: 0 (autodetect).
* pwms: int Tell the driver how many fan speed controls (fan
@@ -29,7 +57,7 @@ Module Parameters
* verbose: int How verbose should the driver be? (0-3):
0 normal output
1 + verbose error reporting
- 2 + sensors type probing info\n"
+ 2 + sensors type probing info (default)
3 + retryable error reporting
Default: 2 (the driver is still in the testing phase)
diff --git a/Documentation/i2c/busses/i2c-sis96x b/Documentation/i2c/busses/i2c-sis96x
index 00a009b977e..08d7b2dac69 100644
--- a/Documentation/i2c/busses/i2c-sis96x
+++ b/Documentation/i2c/busses/i2c-sis96x
@@ -42,8 +42,8 @@ I suspect that this driver could be made to work for the following SiS
chipsets as well: 635, and 635T. If anyone owns a board with those chips
AND is willing to risk crashing & burning an otherwise well-behaved kernel
in the name of progress... please contact me at <mhoffman@lightlink.com> or
-via the project's mailing list: <lm-sensors@lm-sensors.org>. Please
-send bug reports and/or success stories as well.
+via the project's mailing list: <i2c@lm-sensors.org>. Please send bug
+reports and/or success stories as well.
TO DOs
diff --git a/MAINTAINERS b/MAINTAINERS
index 491e034f347..5276d52c3fc 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -274,7 +274,7 @@ S: Maintained
ALI1563 I2C DRIVER
P: Rudolf Marek
M: r.marek@sh.cvut.cz
-L: lm-sensors@lm-sensors.org
+L: i2c@lm-sensors.org
S: Maintained
ALPHA PORT
@@ -1249,7 +1249,7 @@ S: Maintained
I2C SUBSYSTEM
P: Jean Delvare
M: khali@linux-fr.org
-L: lm-sensors@lm-sensors.org
+L: i2c@lm-sensors.org
W: http://www.lm-sensors.nu/
T: quilt kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/
S: Maintained
@@ -2093,7 +2093,7 @@ S: Maintained
OPENCORES I2C BUS DRIVER
P: Peter Korsgaard
M: jacmet@sunsite.dk
-L: lm-sensors@lm-sensors.org
+L: i2c@lm-sensors.org
S: Maintained
ORACLE CLUSTER FILESYSTEM 2 (OCFS2)
@@ -3132,7 +3132,7 @@ S: Maintained
VIAPRO SMBUS DRIVER
P: Jean Delvare
M: khali@linux-fr.org
-L: lm-sensors@lm-sensors.org
+L: i2c@lm-sensors.org
S: Maintained
UCLINUX (AND M68KNOMMU)
@@ -3182,6 +3182,12 @@ P: Evgeniy Polyakov
M: johnpol@2ka.mipt.ru
S: Maintained
+W83791D HARDWARE MONITORING DRIVER
+P: Charles Spirakis
+M: bezaur@gmail.com
+L: lm-sensors@lm-sensors.org
+S: Maintained
+
W83L51xD SD/MMC CARD INTERFACE DRIVER
P: Pierre Ossman
M: drzeus-wbsd@drzeus.cx
diff --git a/drivers/hwmon/abituguru.c b/drivers/hwmon/abituguru.c
index 59122cc0a50..cc15c4f2e9e 100644
--- a/drivers/hwmon/abituguru.c
+++ b/drivers/hwmon/abituguru.c
@@ -142,6 +142,14 @@ static const u8 abituguru_pwm_max[5] = { 0, 255, 255, 75, 75 };
static int force;
module_param(force, bool, 0);
MODULE_PARM_DESC(force, "Set to one to force detection.");
+static int bank1_types[ABIT_UGURU_MAX_BANK1_SENSORS] = { -1, -1, -1, -1, -1,
+ -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1 };
+module_param_array(bank1_types, int, NULL, 0);
+MODULE_PARM_DESC(bank1_types, "Bank1 sensortype autodetection override:\n"
+ " -1 autodetect\n"
+ " 0 volt sensor\n"
+ " 1 temp sensor\n"
+ " 2 not connected");
static int fan_sensors;
module_param(fan_sensors, int, 0);
MODULE_PARM_DESC(fan_sensors, "Number of fan sensors on the uGuru "
@@ -397,6 +405,15 @@ abituguru_detect_bank1_sensor_type(struct abituguru_data *data,
u8 val, buf[3];
int ret = ABIT_UGURU_NC;
+ /* If overriden by the user return the user selected type */
+ if (bank1_types[sensor_addr] >= ABIT_UGURU_IN_SENSOR &&
+ bank1_types[sensor_addr] <= ABIT_UGURU_NC) {
+ ABIT_UGURU_DEBUG(2, "assuming sensor type %d for bank1 sensor "
+ "%d because of \"bank1_types\" module param\n",
+ bank1_types[sensor_addr], (int)sensor_addr);
+ return bank1_types[sensor_addr];
+ }
+
/* First read the sensor and the current settings */
if (abituguru_read(data, ABIT_UGURU_SENSOR_BANK1, sensor_addr, &val,
1, ABIT_UGURU_MAX_RETRIES) != 1)
@@ -514,7 +531,7 @@ abituguru_detect_no_bank2_sensors(struct abituguru_data *data)
{
int i;
- if (fan_sensors) {
+ if (fan_sensors > 0 && fan_sensors <= ABIT_UGURU_MAX_BANK2_SENSORS) {
data->bank2_sensors = fan_sensors;
ABIT_UGURU_DEBUG(2, "assuming %d fan sensors because of "
"\"fan_sensors\" module param\n",
@@ -568,7 +585,7 @@ abituguru_detect_no_pwms(struct abituguru_data *data)
{
int i, j;
- if (pwms) {
+ if (pwms > 0 && pwms <= ABIT_UGURU_MAX_PWMS) {
data->pwms = pwms;
ABIT_UGURU_DEBUG(2, "assuming %d PWM outputs because of "
"\"pwms\" module param\n", (int)data->pwms);
diff --git a/drivers/i2c/algos/i2c-algo-bit.c b/drivers/i2c/algos/i2c-algo-bit.c
index df05df1a0ef..ab230c033f9 100644
--- a/drivers/i2c/algos/i2c-algo-bit.c
+++ b/drivers/i2c/algos/i2c-algo-bit.c
@@ -372,7 +372,6 @@ static inline int readbytes(struct i2c_adapter *i2c_adap, struct i2c_msg *msg)
while (count > 0) {
inval = i2c_inb(i2c_adap);
-/*printk("%#02x ",inval); if ( ! (count % 16) ) printk("\n"); */
if (inval>=0) {
*temp = inval;
rdcount++;
@@ -544,8 +543,7 @@ int i2c_bit_add_bus(struct i2c_adapter *adap)
adap->timeout = 100; /* default values, should */
adap->retries = 3; /* be replaced by defines */
- i2c_add_adapter(adap);
- return 0;
+ return i2c_add_adapter(adap);
}
diff --git a/drivers/i2c/algos/i2c-algo-ite.c b/drivers/i2c/algos/i2c-algo-ite.c
index 2db7bfc8522..70d8eefb5ef 100644
--- a/drivers/i2c/algos/i2c-algo-ite.c
+++ b/drivers/i2c/algos/i2c-algo-ite.c
@@ -742,10 +742,8 @@ int i2c_iic_add_bus(struct i2c_adapter *adap)
adap->retries = 3; /* be replaced by defines */
adap->flags = 0;
- i2c_add_adapter(adap);
iic_init(iic_adap);
-
- return 0;
+ return i2c_add_adapter(adap);
}
diff --git a/drivers/i2c/algos/i2c-algo-pca.c b/drivers/i2c/algos/i2c-algo-pca.c
index 82946acab4c..b88a6fcf7bd 100644
--- a/drivers/i2c/algos/i2c-algo-pca.c
+++ b/drivers/i2c/algos/i2c-algo-pca.c
@@ -374,10 +374,10 @@ int i2c_pca_add_bus(struct i2c_adapter *adap)
adap->timeout = 100; /* default values, should */
adap->retries = 3; /* be replaced by defines */
- rval = pca_init(pca_adap);
+ if ((rval = pca_init(pca_adap)))
+ return rval;
- if (!rval)
- i2c_add_adapter(adap);
+ rval = i2c_add_adapter(adap);
return rval;
}
diff --git a/drivers/i2c/algos/i2c-algo-pcf.c b/drivers/i2c/algos/i2c-algo-pcf.c
index 6e498df1f71..5b24930adb5 100644
--- a/drivers/i2c/algos/i2c-algo-pcf.c
+++ b/drivers/i2c/algos/i2c-algo-pcf.c
@@ -479,9 +479,11 @@ int i2c_pcf_add_bus(struct i2c_adapter *adap)
adap->timeout = 100; /* default values, should */
adap->retries = 3; /* be replaced by defines */
- rval = pcf_init_8584(pcf_adap);
- if (!rval)
- i2c_add_adapter(adap);
+ if ((rval = pcf_init_8584(pcf_adap)))
+ return rval;
+
+ rval = i2c_add_adapter(adap);
+
return rval;
}
diff --git a/drivers/i2c/algos/i2c-algo-sibyte.c b/drivers/i2c/algos/i2c-algo-sibyte.c
index 3df3f09995c..32d41c6fac0 100644
--- a/drivers/i2c/algos/i2c-algo-sibyte.c
+++ b/drivers/i2c/algos/i2c-algo-sibyte.c
@@ -173,9 +173,7 @@ int i2c_sibyte_add_bus(struct i2c_adapter *i2c_adap, int speed)
printk("\n");
}
- i2c_add_adapter(i2c_adap);
-
- return 0;
+ return i2c_add_adapter(i2c_adap);
}
diff --git a/drivers/i2c/busses/i2c-iop3xx.c b/drivers/i2c/busses/i2c-iop3xx.c
index aca7e166860..48c56939c86 100644
--- a/drivers/i2c/busses/i2c-iop3xx.c
+++ b/drivers/i2c/busses/i2c-iop3xx.c
@@ -21,6 +21,9 @@
* - Make it work with IXP46x chips
* - Cleanup function names, coding style, etc
*
+ * - writing to slave address causes latchup on iop331.
+ * fix: driver refuses to address self.
+ *
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, version 2.
@@ -73,12 +76,6 @@ iop3xx_i2c_reset(struct i2c_algo_iop3xx_data *iop3xx_adap)
}
static void
-iop3xx_i2c_set_slave_addr(struct i2c_algo_iop3xx_data *iop3xx_adap)
-{
- __raw_writel(MYSAR, iop3xx_adap->ioaddr + SAR_OFFSET);
-}
-
-static void
iop3xx_i2c_enable(struct i2c_algo_iop3xx_data *iop3xx_adap)
{
u32 cr = IOP3XX_ICR_GCD | IOP3XX_ICR_SCLEN | IOP3XX_ICR_UE;
@@ -248,6 +245,13 @@ iop3xx_i2c_send_target_addr(struct i2c_algo_iop3xx_data *iop3xx_adap,
int status;
int rc;
+ /* avoid writing to my slave address (hangs on 80331),
+ * forbidden in Intel developer manual
+ */
+ if (msg->addr == MYSAR) {
+ return -EBUSY;
+ }
+
__raw_writel(iic_cook_addr(msg), iop3xx_adap->ioaddr + DBR_OFFSET);
cr &= ~(IOP3XX_ICR_MSTOP | IOP3XX_ICR_NACK);
@@ -498,7 +502,6 @@ iop3xx_i2c_probe(struct platform_device *pdev)
spin_lock_init(&adapter_data->lock);
iop3xx_i2c_reset(adapter_data);
- iop3xx_i2c_set_slave_addr(adapter_data);
iop3xx_i2c_enable(adapter_data);
platform_set_drvdata(pdev, new_adapter);
diff --git a/drivers/i2c/busses/i2c-iop3xx.h b/drivers/i2c/busses/i2c-iop3xx.h
index e46ebaea7b1..8485861f6a3 100644
--- a/drivers/i2c/busses/i2c-iop3xx.h
+++ b/drivers/i2c/busses/i2c-iop3xx.h
@@ -80,7 +80,7 @@
#define IOP3XX_GPOD_I2C0 0x00c0 /* clear these bits to enable ch0 */
#define IOP3XX_GPOD_I2C1 0x0030 /* clear these bits to enable ch1 */
-#define MYSAR 0x02 /* SWAG a suitable slave address */
+#define MYSAR 0 /* default slave address */
#define I2C_ERR 321
#define I2C_ERR_BERR (I2C_ERR+0)
diff --git a/drivers/i2c/busses/i2c-powermac.c b/drivers/i2c/busses/i2c-powermac.c
index 2a0b3be7cdd..53bb4359386 100644
--- a/drivers/i2c/busses/i2c-powermac.c
+++ b/drivers/i2c/busses/i2c-powermac.c
@@ -148,8 +148,6 @@ static int i2c_powermac_master_xfer( struct i2c_adapter *adap,
int read;
int addrdir;
- if (num != 1)
- return -EINVAL;
if (msgs->flags & I2C_M_TEN)
return -EINVAL;
read = (msgs->flags & I2C_M_RD) != 0;
@@ -166,7 +164,7 @@ static int i2c_powermac_master_xfer( struct i2c_adapter *adap,
rc = pmac_i2c_xfer(bus, addrdir, 0, 0, msgs->buf, msgs->len);
bail:
pmac_i2c_close(bus);
- return rc < 0 ? rc : msgs->len;
+ return rc < 0 ? rc : 1;
}
static u32 i2c_powermac_func(struct i2c_adapter * adapter)
diff --git a/drivers/i2c/busses/scx200_acb.c b/drivers/i2c/busses/scx200_acb.c
index 22a3eda0416..ced309ff056 100644
--- a/drivers/i2c/busses/scx200_acb.c
+++ b/drivers/i2c/busses/scx200_acb.c
@@ -184,21 +184,21 @@ static void scx200_acb_machine(struct scx200_acb_iface *iface, u8 status)
break;
case state_read:
- /* Set ACK if receiving the last byte */
- if (iface->len == 1)
+ /* Set ACK if _next_ byte will be the last one */
+ if (iface->len == 2)
outb(inb(ACBCTL1) | ACBCTL1_ACK, ACBCTL1);
else
outb(inb(ACBCTL1) & ~ACBCTL1_ACK, ACBCTL1);
- *iface->ptr++ = inb(ACBSDA);
- --iface->len;
-
- if (iface->len == 0) {
+ if (iface->len == 1) {
iface->result = 0;
iface->state = state_idle;
outb(inb(ACBCTL1) | ACBCTL1_STOP, ACBCTL1);
}
+ *iface->ptr++ = inb(ACBSDA);
+ --iface->len;
+
break;
case state_write:
@@ -307,8 +307,12 @@ static s32 scx200_acb_smbus_xfer(struct i2c_adapter *adapter,
buffer = (u8 *)&cur_word;
break;
- case I2C_SMBUS_BLOCK_DATA:
+ case I2C_SMBUS_I2C_BLOCK_DATA:
+ if (rw == I2C_SMBUS_READ)
+ data->block[0] = I2C_SMBUS_BLOCK_MAX; /* For now */
len = data->block[0];
+ if (len == 0 || len > I2C_SMBUS_BLOCK_MAX)
+ return -EINVAL;
buffer = &data->block[1];
break;
@@ -372,7 +376,7 @@ static u32 scx200_acb_func(struct i2c_adapter *adapter)
{
return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE |
I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA |
- I2C_FUNC_SMBUS_BLOCK_DATA;
+ I2C_FUNC_SMBUS_I2C_BLOCK;
}
/* For now, we only handle combined mode (smbus) */
diff --git a/drivers/i2c/chips/pca9539.c b/drivers/i2c/chips/pca9539.c
index 54b6e6a4bee..cb22280cdd2 100644
--- a/drivers/i2c/chips/pca9539.c
+++ b/drivers/i2c/chips/pca9539.c
@@ -134,11 +134,13 @@ static int pca9539_detect(struct i2c_adapter *adapter, int address, int kind)
new_client->driver = &pca9539_driver;
new_client->flags = 0;
- /* Detection: the pca9539 only has 8 registers (0-7).
- A read of 7 should succeed, but a read of 8 should fail. */
- if ((i2c_smbus_read_byte_data(new_client, 7) < 0) ||
- (i2c_smbus_read_byte_data(new_client, 8) >= 0))
- goto exit_kfree;
+ if (kind < 0) {
+ /* Detection: the pca9539 only has 8 registers (0-7).
+ A read of 7 should succeed, but a read of 8 should fail. */
+ if ((i2c_smbus_read_byte_data(new_client, 7) < 0) ||
+ (i2c_smbus_read_byte_data(new_client, 8) >= 0))
+ goto exit_kfree;
+ }
strlcpy(new_client->name, "pca9539", I2C_NAME_SIZE);
diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c
index a45155f799d..9cb277d6aa4 100644
--- a/drivers/i2c/i2c-core.c
+++ b/drivers/i2c/i2c-core.c
@@ -756,9 +756,9 @@ int i2c_probe(struct i2c_adapter *adapter,
"parameter for adapter %d, "
"addr 0x%02x\n", adap_id,
address_data->ignore[j + 1]);
+ ignore = 1;
+ break;
}
- ignore = 1;
- break;
}
if (ignore)
continue;
diff --git a/include/linux/i2c.h b/include/linux/i2c.h
index 526ddc8eecf..eb0628a7ecc 100644
--- a/include/linux/i2c.h
+++ b/include/linux/i2c.h
@@ -193,6 +193,8 @@ struct i2c_algorithm {
to NULL. If an adapter algorithm can do SMBus access, set
smbus_xfer. If set to NULL, the SMBus protocol is simulated
using common I2C messages */
+ /* master_xfer should return the number of messages successfully
+ processed, or a negative value on error */
int (*master_xfer)(struct i2c_adapter *adap,struct i2c_msg *msgs,
int num);
int (*smbus_xfer) (struct i2c_adapter *adap, u16 addr,
generated by cgit v1.2.3 (git 2.25.1) at 2024-10-31 14:53:49 +0000