diff options
| -rw-r--r-- | arch/arm/mach-mx5/board-mx51_babbage.c | 129 |
1 files changed, 129 insertions, 0 deletions
diff --git a/arch/arm/mach-mx5/board-mx51_babbage.c b/arch/arm/mach-mx5/board-mx51_babbage.c index ee67a71db80..99f7ea903a5 100644 --- a/arch/arm/mach-mx5/board-mx51_babbage.c +++ b/arch/arm/mach-mx5/board-mx51_babbage.c @@ -12,11 +12,15 @@ #include <linux/init.h> #include <linux/platform_device.h> +#include <linux/gpio.h> +#include <linux/delay.h> +#include <linux/io.h> #include <mach/common.h> #include <mach/hardware.h> #include <mach/imx-uart.h> #include <mach/iomux-mx51.h> +#include <mach/mxc_ehci.h> #include <asm/irq.h> #include <asm/setup.h> @@ -26,6 +30,17 @@ #include "devices.h" +#define BABBAGE_USB_HUB_RESET (0*32 + 7) /* GPIO_1_7 */ +#define BABBAGE_USBH1_STP (0*32 + 27) /* GPIO_1_27 */ + +/* USB_CTRL_1 */ +#define MX51_USB_CTRL_1_OFFSET 0x10 +#define MX51_USB_CTRL_UH1_EXT_CLK_EN (1 << 25) + +#define MX51_USB_PLLDIV_12_MHZ 0x00 +#define MX51_USB_PLL_DIV_19_2_MHZ 0x01 +#define MX51_USB_PLL_DIV_24_MHZ 0x02 + static struct platform_device *devices[] __initdata = { &mxc_fec_device, }; @@ -46,6 +61,22 @@ static struct pad_desc mx51babbage_pads[] = { MX51_PAD_EIM_D26__UART3_TXD, MX51_PAD_EIM_D27__UART3_RTS, MX51_PAD_EIM_D24__UART3_CTS, + + /* USB HOST1 */ + MX51_PAD_USBH1_CLK__USBH1_CLK, + MX51_PAD_USBH1_DIR__USBH1_DIR, + MX51_PAD_USBH1_NXT__USBH1_NXT, + MX51_PAD_USBH1_DATA0__USBH1_DATA0, + MX51_PAD_USBH1_DATA1__USBH1_DATA1, + MX51_PAD_USBH1_DATA2__USBH1_DATA2, + MX51_PAD_USBH1_DATA3__USBH1_DATA3, + MX51_PAD_USBH1_DATA4__USBH1_DATA4, + MX51_PAD_USBH1_DATA5__USBH1_DATA5, + MX51_PAD_USBH1_DATA6__USBH1_DATA6, + MX51_PAD_USBH1_DATA7__USBH1_DATA7, + + /* USB HUB reset line*/ + MX51_PAD_GPIO_1_7__GPIO1_7, }; /* Serial ports */ @@ -66,15 +97,113 @@ static inline void mxc_init_imx_uart(void) } #endif /* SERIAL_IMX */ +static int gpio_usbh1_active(void) +{ + struct pad_desc usbh1stp_gpio = MX51_PAD_USBH1_STP__GPIO_1_27; + int ret; + + /* Set USBH1_STP to GPIO and toggle it */ + mxc_iomux_v3_setup_pad(&usbh1stp_gpio); + ret = gpio_request(BABBAGE_USBH1_STP, "usbh1_stp"); + + if (ret) { + pr_debug("failed to get MX51_PAD_USBH1_STP__GPIO_1_27: %d\n", ret); + return ret; + } + gpio_direction_output(BABBAGE_USBH1_STP, 0); + gpio_set_value(BABBAGE_USBH1_STP, 1); + msleep(100); + gpio_free(BABBAGE_USBH1_STP); + return 0; +} + +static inline void babbage_usbhub_reset(void) +{ + int ret; + + /* Bring USB hub out of reset */ + ret = gpio_request(BABBAGE_USB_HUB_RESET, "GPIO1_7"); + if (ret) { + printk(KERN_ERR"failed to get GPIO_USB_HUB_RESET: %d\n", ret); + return; + } + gpio_direction_output(BABBAGE_USB_HUB_RESET, 0); + + /* USB HUB RESET - De-assert USB HUB RESET_N */ + msleep(1); + gpio_set_value(BABBAGE_USB_HUB_RESET, 0); + msleep(1); + gpio_set_value(BABBAGE_USB_HUB_RESET, 1); +} + +/* This function is board specific as the bit mask for the plldiv will also +be different for other Freescale SoCs, thus a common bitmask is not +possible and cannot get place in /plat-mxc/ehci.c.*/ +static int initialize_otg_port(struct platform_device *pdev) +{ + u32 v; + void __iomem *usb_base; + u32 usbother_base; + + usb_base = ioremap(MX51_OTG_BASE_ADDR, SZ_4K); + usbother_base = usb_base + MX5_USBOTHER_REGS_OFFSET; + + /* Set the PHY clock to 19.2MHz */ + v = __raw_readl(usbother_base + MXC_USB_PHY_CTR_FUNC2_OFFSET); + v &= ~MX5_USB_UTMI_PHYCTRL1_PLLDIV_MASK; + v |= MX51_USB_PLL_DIV_19_2_MHZ; + __raw_writel(v, usbother_base + MXC_USB_PHY_CTR_FUNC2_OFFSET); + iounmap(usb_base); + return 0; +} + +static int initialize_usbh1_port(struct platform_device *pdev) +{ + u32 v; + void __iomem *usb_base; + u32 usbother_base; + + usb_base = ioremap(MX51_OTG_BASE_ADDR, SZ_4K); + usbother_base = usb_base + MX5_USBOTHER_REGS_OFFSET; + + /* The clock for the USBH1 ULPI port will come externally from the PHY. */ + v = __raw_readl(usbother_base + MX51_USB_CTRL_1_OFFSET); + __raw_writel(v | MX51_USB_CTRL_UH1_EXT_CLK_EN, usbother_base + MX51_USB_CTRL_1_OFFSET); + iounmap(usb_base); + return 0; +} + +static struct mxc_usbh_platform_data dr_utmi_config = { + .init = initialize_otg_port, + .portsc = MXC_EHCI_UTMI_16BIT, + .flags = MXC_EHCI_INTERNAL_PHY, +}; + +static struct mxc_usbh_platform_data usbh1_config = { + .init = initialize_usbh1_port, + .portsc = MXC_EHCI_MODE_ULPI, + .flags = (MXC_EHCI_POWER_PINS_ENABLED | MXC_EHCI_ITC_NO_THRESHOLD), +}; + /* * Board specific initialization. */ static void __init mxc_board_init(void) { + struct pad_desc usbh1stp = MX51_PAD_USBH1_STP__USBH1_STP; + mxc_iomux_v3_setup_multiple_pads(mx51babbage_pads, ARRAY_SIZE(mx51babbage_pads)); mxc_init_imx_uart(); platform_add_devices(devices, ARRAY_SIZE(devices)); + + mxc_register_device(&mxc_usbdr_host_device, &dr_utmi_config); + + gpio_usbh1_active(); + mxc_register_device(&mxc_usbh1_device, &usbh1_config); + /* setback USBH1_STP to be function */ + mxc_iomux_v3_setup_pad(&usbh1stp); + babbage_usbhub_reset(); } static void __init mx51_babbage_timer_init(void) |