diff options
| -rw-r--r-- | include/linux/mtd/pfow.h | 159 |
1 files changed, 159 insertions, 0 deletions
diff --git a/include/linux/mtd/pfow.h b/include/linux/mtd/pfow.h new file mode 100644 index 00000000000..b730d4f8465 --- /dev/null +++ b/include/linux/mtd/pfow.h @@ -0,0 +1,159 @@ +/* Primary function overlay window definitions + * and service functions used by LPDDR chips + */ +#ifndef __LINUX_MTD_PFOW_H +#define __LINUX_MTD_PFOW_H + +#include <linux/mtd/qinfo.h> + +/* PFOW registers addressing */ +/* Address of symbol "P" */ +#define PFOW_QUERY_STRING_P 0x0000 +/* Address of symbol "F" */ +#define PFOW_QUERY_STRING_F 0x0002 +/* Address of symbol "O" */ +#define PFOW_QUERY_STRING_O 0x0004 +/* Address of symbol "W" */ +#define PFOW_QUERY_STRING_W 0x0006 +/* Identification info for LPDDR chip */ +#define PFOW_MANUFACTURER_ID 0x0020 +#define PFOW_DEVICE_ID 0x0022 +/* Address in PFOW where prog buffer can can be found */ +#define PFOW_PROGRAM_BUFFER_OFFSET 0x0040 +/* Size of program buffer in words */ +#define PFOW_PROGRAM_BUFFER_SIZE 0x0042 +/* Address command code register */ +#define PFOW_COMMAND_CODE 0x0080 +/* command data register */ +#define PFOW_COMMAND_DATA 0x0084 +/* command address register lower address bits */ +#define PFOW_COMMAND_ADDRESS_L 0x0088 +/* command address register upper address bits */ +#define PFOW_COMMAND_ADDRESS_H 0x008a +/* number of bytes to be proggrammed lower address bits */ +#define PFOW_DATA_COUNT_L 0x0090 +/* number of bytes to be proggrammed higher address bits */ +#define PFOW_DATA_COUNT_H 0x0092 +/* command execution register, the only possible value is 0x01 */ +#define PFOW_COMMAND_EXECUTE 0x00c0 +/* 0x01 should be written at this address to clear buffer */ +#define PFOW_CLEAR_PROGRAM_BUFFER 0x00c4 +/* device program/erase suspend register */ +#define PFOW_PROGRAM_ERASE_SUSPEND 0x00c8 +/* device status register */ +#define PFOW_DSR 0x00cc + +/* LPDDR memory device command codes */ +/* They are possible values of PFOW command code register */ +#define LPDDR_WORD_PROGRAM 0x0041 +#define LPDDR_BUFF_PROGRAM 0x00E9 +#define LPDDR_BLOCK_ERASE 0x0020 +#define LPDDR_LOCK_BLOCK 0x0061 +#define LPDDR_UNLOCK_BLOCK 0x0062 +#define LPDDR_READ_BLOCK_LOCK_STATUS 0x0065 +#define LPDDR_INFO_QUERY 0x0098 +#define LPDDR_READ_OTP 0x0097 +#define LPDDR_PROG_OTP 0x00C0 +#define LPDDR_RESUME 0x00D0 + +/* Defines possible value of PFOW command execution register */ +#define LPDDR_START_EXECUTION 0x0001 + +/* Defines possible value of PFOW program/erase suspend register */ +#define LPDDR_SUSPEND 0x0001 + +/* Possible values of PFOW device status register */ +/* access R - read; RC read & clearable */ +#define DSR_DPS (1<<1) /* RC; device protect status + * 0 - not protected 1 - locked */ +#define DSR_PSS (1<<2) /* R; program suspend status; + * 0-prog in progress/completed, + * 1- prog suspended */ +#define DSR_VPPS (1<<3) /* RC; 0-Vpp OK, * 1-Vpp low */ +#define DSR_PROGRAM_STATUS (1<<4) /* RC; 0-successful, 1-error */ +#define DSR_ERASE_STATUS (1<<5) /* RC; erase or blank check status; + * 0-success erase/blank check, + * 1 blank check error */ +#define DSR_ESS (1<<6) /* R; erase suspend status; + * 0-erase in progress/complete, + * 1 erase suspended */ +#define DSR_READY_STATUS (1<<7) /* R; Device status + * 0-busy, + * 1-ready */ +#define DSR_RPS (0x3<<8) /* RC; region program status + * 00 - Success, + * 01-re-program attempt in region with + * object mode data, + * 10-object mode program w attempt in + * region with control mode data + * 11-attempt to program invalid half + * with 0x41 command */ +#define DSR_AOS (1<<12) /* RC; 1- AO related failure */ +#define DSR_AVAILABLE (1<<15) /* R; Device availbility + * 1 - Device available + * 0 - not available */ + +/* The superset of all possible error bits in DSR */ +#define DSR_ERR 0x133A + +static inline void send_pfow_command(struct map_info *map, + unsigned long cmd_code, unsigned long adr, + unsigned long len, map_word *datum) +{ + int bits_per_chip = map_bankwidth(map) * 8; + int chipnum; + struct lpddr_private *lpddr = map->fldrv_priv; + chipnum = adr >> lpddr->chipshift; + + map_write(map, CMD(cmd_code), map->pfow_base + PFOW_COMMAND_CODE); + map_write(map, CMD(adr & ((1<<bits_per_chip) - 1)), + map->pfow_base + PFOW_COMMAND_ADDRESS_L); + map_write(map, CMD(adr>>bits_per_chip), + map->pfow_base + PFOW_COMMAND_ADDRESS_H); + if (len) { + map_write(map, CMD(len & ((1<<bits_per_chip) - 1)), + map->pfow_base + PFOW_DATA_COUNT_L); + map_write(map, CMD(len>>bits_per_chip), + map->pfow_base + PFOW_DATA_COUNT_H); + } + if (datum) + map_write(map, *datum, map->pfow_base + PFOW_COMMAND_DATA); + + /* Command execution start */ + map_write(map, CMD(LPDDR_START_EXECUTION), + map->pfow_base + PFOW_COMMAND_EXECUTE); +} + +static inline void print_drs_error(unsigned dsr) +{ + int prog_status = (dsr & DSR_RPS) >> 8; + + if (!(dsr & DSR_AVAILABLE)) + printk(KERN_NOTICE"DSR.15: (0) Device not Available\n"); + if (prog_status & 0x03) + printk(KERN_NOTICE"DSR.9,8: (11) Attempt to program invalid " + "half with 41h command\n"); + else if (prog_status & 0x02) + printk(KERN_NOTICE"DSR.9,8: (10) Object Mode Program attempt " + "in region with Control Mode data\n"); + else if (prog_status & 0x01) + printk(KERN_NOTICE"DSR.9,8: (01) Program attempt in region " + "with Object Mode data\n"); + if (!(dsr & DSR_READY_STATUS)) + printk(KERN_NOTICE"DSR.7: (0) Device is Busy\n"); + if (dsr & DSR_ESS) + printk(KERN_NOTICE"DSR.6: (1) Erase Suspended\n"); + if (dsr & DSR_ERASE_STATUS) + printk(KERN_NOTICE"DSR.5: (1) Erase/Blank check error\n"); + if (dsr & DSR_PROGRAM_STATUS) + printk(KERN_NOTICE"DSR.4: (1) Program Error\n"); + if (dsr & DSR_VPPS) + printk(KERN_NOTICE"DSR.3: (1) Vpp low detect, operation " + "aborted\n"); + if (dsr & DSR_PSS) + printk(KERN_NOTICE"DSR.2: (1) Program suspended\n"); + if (dsr & DSR_DPS) + printk(KERN_NOTICE"DSR.1: (1) Aborted Erase/Program attempt " + "on locked block\n"); +} +#endif /* __LINUX_MTD_PFOW_H */ |