diff options
52 files changed, 617 insertions, 678 deletions
diff --git a/Documentation/cdrom/ide-cd b/Documentation/cdrom/ide-cd index 2c558cd6c1e..f4dc9de2694 100644 --- a/Documentation/cdrom/ide-cd +++ b/Documentation/cdrom/ide-cd @@ -159,42 +159,7 @@ two arguments: the CDROM device, and the slot number to which you wish to change. If the slot number is -1, the drive is unloaded. -4. Compilation options ----------------------- - -There are a few additional options which can be set when compiling the -driver. Most people should not need to mess with any of these; they -are listed here simply for completeness. A compilation option can be -enabled by adding a line of the form `#define <option> 1' to the top -of ide-cd.c. All these options are disabled by default. - -VERBOSE_IDE_CD_ERRORS - If this is set, ATAPI error codes will be translated into textual - descriptions. In addition, a dump is made of the command which - provoked the error. This is off by default to save the memory used - by the (somewhat long) table of error descriptions. - -STANDARD_ATAPI - If this is set, the code needed to deal with certain drives which do - not properly implement the ATAPI spec will be disabled. If you know - your drive implements ATAPI properly, you can turn this on to get a - slightly smaller kernel. - -NO_DOOR_LOCKING - If this is set, the driver will never attempt to lock the door of - the drive. - -CDROM_NBLOCKS_BUFFER - This sets the size of the buffer to be used for a CDROMREADAUDIO - ioctl. The default is 8. - -TEST - This currently enables an additional ioctl which enables a user-mode - program to execute an arbitrary packet command. See the source for - details. This should be left off unless you know what you're doing. - - -5. Common problems +4. Common problems ------------------ This section discusses some common problems encountered when trying to @@ -371,7 +336,7 @@ f. Data corruption. expense of low system performance. -6. cdchange.c +5. cdchange.c ------------- /* diff --git a/drivers/ide/aec62xx.c b/drivers/ide/aec62xx.c index 878f8ec6dbe..57d00caefc8 100644 --- a/drivers/ide/aec62xx.c +++ b/drivers/ide/aec62xx.c @@ -81,15 +81,15 @@ static u8 pci_bus_clock_list_ultra (u8 speed, struct chipset_bus_clock_list_entr return chipset_table->ultra_settings; } -static void aec6210_set_mode(ide_drive_t *drive, const u8 speed) +static void aec6210_set_mode(ide_hwif_t *hwif, ide_drive_t *drive) { - ide_hwif_t *hwif = drive->hwif; struct pci_dev *dev = to_pci_dev(hwif->dev); struct ide_host *host = pci_get_drvdata(dev); struct chipset_bus_clock_list_entry *bus_clock = host->host_priv; u16 d_conf = 0; u8 ultra = 0, ultra_conf = 0; u8 tmp0 = 0, tmp1 = 0, tmp2 = 0; + const u8 speed = drive->dma_mode; unsigned long flags; local_irq_save(flags); @@ -109,15 +109,15 @@ static void aec6210_set_mode(ide_drive_t *drive, const u8 speed) local_irq_restore(flags); } -static void aec6260_set_mode(ide_drive_t *drive, const u8 speed) +static void aec6260_set_mode(ide_hwif_t *hwif, ide_drive_t *drive) { - ide_hwif_t *hwif = drive->hwif; struct pci_dev *dev = to_pci_dev(hwif->dev); struct ide_host *host = pci_get_drvdata(dev); struct chipset_bus_clock_list_entry *bus_clock = host->host_priv; u8 unit = drive->dn & 1; u8 tmp1 = 0, tmp2 = 0; u8 ultra = 0, drive_conf = 0, ultra_conf = 0; + const u8 speed = drive->dma_mode; unsigned long flags; local_irq_save(flags); @@ -134,9 +134,10 @@ static void aec6260_set_mode(ide_drive_t *drive, const u8 speed) local_irq_restore(flags); } -static void aec_set_pio_mode(ide_drive_t *drive, const u8 pio) +static void aec_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive) { - drive->hwif->port_ops->set_dma_mode(drive, pio + XFER_PIO_0); + drive->dma_mode = drive->pio_mode; + hwif->port_ops->set_dma_mode(hwif, drive); } static int init_chipset_aec62xx(struct pci_dev *dev) diff --git a/drivers/ide/ali14xx.c b/drivers/ide/ali14xx.c index 90da1f953ed..25b9fe3a9f8 100644 --- a/drivers/ide/ali14xx.c +++ b/drivers/ide/ali14xx.c @@ -109,13 +109,14 @@ static DEFINE_SPINLOCK(ali14xx_lock); * This function computes timing parameters * and sets controller registers accordingly. */ -static void ali14xx_set_pio_mode(ide_drive_t *drive, const u8 pio) +static void ali14xx_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive) { int driveNum; int time1, time2; u8 param1, param2, param3, param4; unsigned long flags; int bus_speed = ide_vlb_clk ? ide_vlb_clk : 50; + const u8 pio = drive->pio_mode - XFER_PIO_0; struct ide_timing *t = ide_timing_find_mode(XFER_PIO_0 + pio); /* calculate timing, according to PIO mode */ diff --git a/drivers/ide/alim15x3.c b/drivers/ide/alim15x3.c index 0abc43f3101..2c8016ad0e2 100644 --- a/drivers/ide/alim15x3.c +++ b/drivers/ide/alim15x3.c @@ -8,7 +8,7 @@ * Copyright (C) 2002 Alan Cox * ALi (now ULi M5228) support by Clear Zhang <Clear.Zhang@ali.com.tw> * Copyright (C) 2007 MontaVista Software, Inc. <source@mvista.com> - * Copyright (C) 2007 Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> + * Copyright (C) 2007-2010 Bartlomiej Zolnierkiewicz * * (U)DMA capable version of ali 1533/1543(C), 1535(D) * @@ -48,61 +48,84 @@ static u8 m5229_revision; static u8 chip_is_1543c_e; static struct pci_dev *isa_dev; +static void ali_fifo_control(ide_hwif_t *hwif, ide_drive_t *drive, int on) +{ + struct pci_dev *pdev = to_pci_dev(hwif->dev); + int pio_fifo = 0x54 + hwif->channel; + u8 fifo; + int shift = 4 * (drive->dn & 1); + + pci_read_config_byte(pdev, pio_fifo, &fifo); + fifo &= ~(0x0F << shift); + fifo |= (on << shift); + pci_write_config_byte(pdev, pio_fifo, fifo); +} + +static void ali_program_timings(ide_hwif_t *hwif, ide_drive_t *drive, + struct ide_timing *t, u8 ultra) +{ + struct pci_dev *dev = to_pci_dev(hwif->dev); + int port = hwif->channel ? 0x5c : 0x58; + int udmat = 0x56 + hwif->channel; + u8 unit = drive->dn & 1, udma; + int shift = 4 * unit; + + /* Set up the UDMA */ + pci_read_config_byte(dev, udmat, &udma); + udma &= ~(0x0F << shift); + udma |= ultra << shift; + pci_write_config_byte(dev, udmat, udma); + + if (t == NULL) + return; + + t->setup = clamp_val(t->setup, 1, 8) & 7; + t->act8b = clamp_val(t->act8b, 1, 8) & 7; + t->rec8b = clamp_val(t->rec8b, 1, 16) & 15; + t->active = clamp_val(t->active, 1, 8) & 7; + t->recover = clamp_val(t->recover, 1, 16) & 15; + + pci_write_config_byte(dev, port, t->setup); + pci_write_config_byte(dev, port + 1, (t->act8b << 4) | t->rec8b); + pci_write_config_byte(dev, port + unit + 2, + (t->active << 4) | t->recover); +} + /** * ali_set_pio_mode - set host controller for PIO mode + * @hwif: port * @drive: drive - * @pio: PIO mode number * * Program the controller for the given PIO mode. */ -static void ali_set_pio_mode(ide_drive_t *drive, const u8 pio) +static void ali_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive) { - ide_hwif_t *hwif = drive->hwif; - struct pci_dev *dev = to_pci_dev(hwif->dev); - struct ide_timing *t = ide_timing_find_mode(XFER_PIO_0 + pio); - int s_time = t->setup, a_time = t->active, c_time = t->cycle; - u8 s_clc, a_clc, r_clc; - unsigned long flags; + ide_drive_t *pair = ide_get_pair_dev(drive); int bus_speed = ide_pci_clk ? ide_pci_clk : 33; - int port = hwif->channel ? 0x5c : 0x58; - int portFIFO = hwif->channel ? 0x55 : 0x54; - u8 cd_dma_fifo = 0, unit = drive->dn & 1; - - if ((s_clc = (s_time * bus_speed + 999) / 1000) >= 8) - s_clc = 0; - if ((a_clc = (a_time * bus_speed + 999) / 1000) >= 8) - a_clc = 0; - - if (!(r_clc = (c_time * bus_speed + 999) / 1000 - a_clc - s_clc)) { - r_clc = 1; - } else { - if (r_clc >= 16) - r_clc = 0; + unsigned long T = 1000000 / bus_speed; /* PCI clock based */ + struct ide_timing t; + + ide_timing_compute(drive, drive->pio_mode, &t, T, 1); + if (pair) { + struct ide_timing p; + + ide_timing_compute(pair, pair->pio_mode, &p, T, 1); + ide_timing_merge(&p, &t, &t, + IDE_TIMING_SETUP | IDE_TIMING_8BIT); + if (pair->dma_mode) { + ide_timing_compute(pair, pair->dma_mode, &p, T, 1); + ide_timing_merge(&p, &t, &t, + IDE_TIMING_SETUP | IDE_TIMING_8BIT); + } } - local_irq_save(flags); - + /* * PIO mode => ATA FIFO on, ATAPI FIFO off */ - pci_read_config_byte(dev, portFIFO, &cd_dma_fifo); - if (drive->media==ide_disk) { - if (unit) { - pci_write_config_byte(dev, portFIFO, (cd_dma_fifo & 0x0F) | 0x50); - } else { - pci_write_config_byte(dev, portFIFO, (cd_dma_fifo & 0xF0) | 0x05); - } - } else { - if (unit) { - pci_write_config_byte(dev, portFIFO, cd_dma_fifo & 0x0F); - } else { - pci_write_config_byte(dev, portFIFO, cd_dma_fifo & 0xF0); - } - } - - pci_write_config_byte(dev, port, s_clc); - pci_write_config_byte(dev, port + unit + 2, (a_clc << 4) | r_clc); - local_irq_restore(flags); + ali_fifo_control(hwif, drive, (drive->media == ide_disk) ? 0x05 : 0x00); + + ali_program_timings(hwif, drive, &t, 0); } /** @@ -132,44 +155,42 @@ static u8 ali_udma_filter(ide_drive_t *drive) /** * ali_set_dma_mode - set host controller for DMA mode + * @hwif: port * @drive: drive - * @speed: DMA mode * * Configure the hardware for the desired IDE transfer mode. */ -static void ali_set_dma_mode(ide_drive_t *drive, const u8 speed) +static void ali_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive) { - ide_hwif_t *hwif = drive->hwif; + static u8 udma_timing[7] = { 0xC, 0xB, 0xA, 0x9, 0x8, 0xF, 0xD }; struct pci_dev *dev = to_pci_dev(hwif->dev); - u8 speed1 = speed; - u8 unit = drive->dn & 1; + ide_drive_t *pair = ide_get_pair_dev(drive); + int bus_speed = ide_pci_clk ? ide_pci_clk : 33; + unsigned long T = 1000000 / bus_speed; /* PCI clock based */ + const u8 speed = drive->dma_mode; u8 tmpbyte = 0x00; - int m5229_udma = (hwif->channel) ? 0x57 : 0x56; - - if (speed == XFER_UDMA_6) - speed1 = 0x47; + struct ide_timing t; if (speed < XFER_UDMA_0) { - u8 ultra_enable = (unit) ? 0x7f : 0xf7; - /* - * clear "ultra enable" bit - */ - pci_read_config_byte(dev, m5229_udma, &tmpbyte); - tmpbyte &= ultra_enable; - pci_write_config_byte(dev, m5229_udma, tmpbyte); - - /* - * FIXME: Oh, my... DMA timings are never set. - */ + ide_timing_compute(drive, drive->dma_mode, &t, T, 1); + if (pair) { + struct ide_timing p; + + ide_timing_compute(pair, pair->pio_mode, &p, T, 1); + ide_timing_merge(&p, &t, &t, + IDE_TIMING_SETUP | IDE_TIMING_8BIT); + if (pair->dma_mode) { + ide_timing_compute(pair, pair->dma_mode, + &p, T, 1); + ide_timing_merge(&p, &t, &t, + IDE_TIMING_SETUP | IDE_TIMING_8BIT); + } + } + ali_program_timings(hwif, drive, &t, 0); } else { - pci_read_config_byte(dev, m5229_udma, &tmpbyte); - tmpbyte &= (0x0f << ((1-unit) << 2)); - /* - * enable ultra dma and set timing - */ - tmpbyte |= ((0x08 | ((4-speed1)&0x07)) << (unit << 2)); - pci_write_config_byte(dev, m5229_udma, tmpbyte); + ali_program_timings(hwif, drive, NULL, + udma_timing[speed - XFER_UDMA_0]); if (speed >= XFER_UDMA_3) { pci_read_config_byte(dev, 0x4b, &tmpbyte); tmpbyte |= 1; @@ -355,19 +376,13 @@ static int ali_cable_override(struct pci_dev *pdev) * * This checks if the controller and the cable are capable * of UDMA66 transfers. It doesn't check the drives. - * But see note 2 below! - * - * FIXME: frobs bits that are not defined on newer ALi devicea */ static u8 ali_cable_detect(ide_hwif_t *hwif) { struct pci_dev *dev = to_pci_dev(hwif->dev); - unsigned long flags; u8 cbl = ATA_CBL_PATA40, tmpbyte; - local_irq_save(flags); - if (m5229_revision >= 0xC2) { /* * m5229 80-pin cable detection (from Host View) @@ -387,8 +402,6 @@ static u8 ali_cable_detect(ide_hwif_t *hwif) } } - local_irq_restore(flags); - return cbl; } @@ -584,6 +597,6 @@ static void __exit ali15x3_ide_exit(void) module_init(ali15x3_ide_init); module_exit(ali15x3_ide_exit); -MODULE_AUTHOR("Michael Aubry, Andrzej Krzysztofowicz, CJ, Andre Hedrick, Alan Cox"); +MODULE_AUTHOR("Michael Aubry, Andrzej Krzysztofowicz, CJ, Andre Hedrick, Alan Cox, Bartlomiej Zolnierkiewicz"); MODULE_DESCRIPTION("PCI driver module for ALi 15x3 IDE"); MODULE_LICENSE("GPL"); diff --git a/drivers/ide/amd74xx.c b/drivers/ide/amd74xx.c index 628cd2e5fed..3747b2561f0 100644 --- a/drivers/ide/amd74xx.c +++ b/drivers/ide/amd74xx.c @@ -3,7 +3,7 @@ * IDE driver for Linux. * * Copyright (c) 2000-2002 Vojtech Pavlik - * Copyright (c) 2007-2008 Bartlomiej Zolnierkiewicz + * Copyright (c) 2007-2010 Bartlomiej Zolnierkiewicz * * Based on the work of: * Andre Hedrick @@ -70,7 +70,8 @@ static void amd_set_speed(struct pci_dev *dev, u8 dn, u8 udma_mask, default: return; } - pci_write_config_byte(dev, AMD_UDMA_TIMING + offset + (3 - dn), t); + if (timing->udma) + pci_write_config_byte(dev, AMD_UDMA_TIMING + offset + 3 - dn, t); } /* @@ -78,14 +79,14 @@ static void amd_set_speed(struct pci_dev *dev, u8 dn, u8 udma_mask, * to a desired transfer mode. It also can be called by upper layers. */ -static void amd_set_drive(ide_drive_t *drive, const u8 speed) +static void amd_set_drive(ide_hwif_t *hwif, ide_drive_t *drive) { - ide_hwif_t *hwif = drive->hwif; struct pci_dev *dev = to_pci_dev(hwif->dev); ide_drive_t *peer = ide_get_pair_dev(drive); struct ide_timing t, p; int T, UT; u8 udma_mask = hwif->ultra_mask; + const u8 speed = drive->dma_mode; T = 1000000000 / amd_clock; UT = (udma_mask == ATA_UDMA2) ? T : (T / 2); @@ -93,7 +94,7 @@ static void amd_set_drive(ide_drive_t *drive, const u8 speed) ide_timing_compute(drive, speed, &t, T, UT); if (peer) { - ide_timing_compute(peer, peer->current_speed, &p, T, UT); + ide_timing_compute(peer, peer->pio_mode, &p, T, UT); ide_timing_merge(&p, &t, &t, IDE_TIMING_8BIT); } @@ -107,9 +108,10 @@ static void amd_set_drive(ide_drive_t *drive, const u8 speed) * amd_set_pio_mode() is a callback from upper layers for PIO-only tuning. */ -static void amd_set_pio_mode(ide_drive_t *drive, const u8 pio) +static void amd_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive) { - amd_set_drive(drive, XFER_PIO_0 + pio); + drive->dma_mode = drive->pio_mode; + amd_set_drive(hwif, drive); } static void amd7409_cable_detect(struct pci_dev *dev) @@ -340,6 +342,6 @@ static void __exit amd74xx_ide_exit(void) module_init(amd74xx_ide_init); module_exit(amd74xx_ide_exit); -MODULE_AUTHOR("Vojtech Pavlik"); +MODULE_AUTHOR("Vojtech Pavlik, Bartlomiej Zolnierkiewicz"); MODULE_DESCRIPTION("AMD PCI IDE driver"); MODULE_LICENSE("GPL"); diff --git a/drivers/ide/at91_ide.c b/drivers/ide/at91_ide.c index 248219a89a6..000a78e5246 100644 --- a/drivers/ide/at91_ide.c +++ b/drivers/ide/at91_ide.c @@ -172,11 +172,12 @@ static void at91_ide_output_data(ide_drive_t *drive, struct ide_cmd *cmd, leave_16bit(chipselect, mode); } -static void at91_ide_set_pio_mode(ide_drive_t *drive, const u8 pio) +static void at91_ide_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive) { struct ide_timing *timing; - u8 chipselect = drive->hwif->select_data; + u8 chipselect = hwif->select_data; int use_iordy = 0; + const u8 pio = drive->pio_mode - XFER_PIO_0; pdbg("chipselect %u pio %u\n", chipselect, pio); diff --git a/drivers/ide/atiixp.c b/drivers/ide/atiixp.c index 837322b10a4..15f0ead89f5 100644 --- a/drivers/ide/atiixp.c +++ b/drivers/ide/atiixp.c @@ -42,19 +42,20 @@ static DEFINE_SPINLOCK(atiixp_lock); /** * atiixp_set_pio_mode - set host controller for PIO mode + * @hwif: port * @drive: drive - * @pio: PIO mode number * * Set the interface PIO mode. */ -static void atiixp_set_pio_mode(ide_drive_t *drive, const u8 pio) +static void atiixp_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive) { - struct pci_dev *dev = to_pci_dev(drive->hwif->dev); + struct pci_dev *dev = to_pci_dev(hwif->dev); unsigned long flags; int timing_shift = (drive->dn ^ 1) * 8; u32 pio_timing_data; u16 pio_mode_data; + const u8 pio = drive->pio_mode - XFER_PIO_0; spin_lock_irqsave(&atiixp_lock, flags); @@ -74,21 +75,22 @@ static void atiixp_set_pio_mode(ide_drive_t *drive, const u8 pio) /** * atiixp_set_dma_mode - set host controller for DMA mode + * @hwif: port * @drive: drive - * @speed: DMA mode * * Set a ATIIXP host controller to the desired DMA mode. This involves * programming the right timing data into the PCI configuration space. */ -static void atiixp_set_dma_mode(ide_drive_t *drive, const u8 speed) +static void atiixp_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive) { - struct pci_dev *dev = to_pci_dev(drive->hwif->dev); + struct pci_dev *dev = to_pci_dev(hwif->dev); unsigned long flags; int timing_shift = (drive->dn ^ 1) * 8; u32 tmp32; u16 tmp16; u16 udma_ctl = 0; + const u8 speed = drive->dma_mode; spin_lock_irqsave(&atiixp_lock, flags); diff --git a/drivers/ide/au1xxx-ide.c b/drivers/ide/au1xxx-ide.c index 349a67bf1a3..b26c23416fa 100644 --- a/drivers/ide/au1xxx-ide.c +++ b/drivers/ide/au1xxx-ide.c @@ -99,12 +99,11 @@ static void au1xxx_output_data(ide_drive_t *drive, struct ide_cmd *cmd, } #endif -static void au1xxx_set_pio_mode(ide_drive_t *drive, const u8 pio) +static void au1xxx_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive) { int mem_sttime = 0, mem_stcfg = au_readl(MEM_STCFG2); - /* set pio mode! */ - switch(pio) { + switch (drive->pio_mode - XFER_PIO_0) { case 0: mem_sttime = SBC_IDE_TIMING(PIO0); @@ -161,11 +160,11 @@ static void au1xxx_set_pio_mode(ide_drive_t *drive, const u8 pio) au_writel(mem_stcfg,MEM_STCFG2); } -static void auide_set_dma_mode(ide_drive_t *drive, const u8 speed) +static void auide_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive) { int mem_sttime = 0, mem_stcfg = au_readl(MEM_STCFG2); - switch(speed) { + switch (drive->dma_mode) { #ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA case XFER_MW_DMA_2: mem_sttime = SBC_IDE_TIMING(MDMA2); @@ -297,8 +296,8 @@ static int auide_dma_test_irq(ide_drive_t *drive) */ drive->waiting_for_dma++; if (drive->waiting_for_dma >= DMA_WAIT_TIMEOUT) { - printk(KERN_WARNING "%s: timeout waiting for ddma to \ - complete\n", drive->name); + printk(KERN_WARNING "%s: timeout waiting for ddma to complete\n", + drive->name); return 1; } udelay(10); diff --git a/drivers/ide/cmd640.c b/drivers/ide/cmd640.c index 1a32d62ed86..d2b8b272bc2 100644 --- a/drivers/ide/cmd640.c +++ b/drivers/ide/cmd640.c @@ -572,9 +572,10 @@ static void cmd640_set_mode(ide_drive_t *drive, unsigned int index, program_drive_counts(drive, index); } -static void cmd640_set_pio_mode(ide_drive_t *drive, const u8 pio) +static void cmd640_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive) { unsigned int index = 0, cycle_time; + const u8 pio = drive->pio_mode - XFER_PIO_0; u8 b; switch (pio) { @@ -605,7 +606,7 @@ static void cmd640_set_pio_mode(ide_drive_t *drive, const u8 pio) } #endif /* CONFIG_BLK_DEV_CMD640_ENHANCED */ -static void cmd640_init_dev(ide_drive_t *drive) +static void __init cmd640_init_dev(ide_drive_t *drive) { unsigned int i = drive->hwif->channel * 2 + (drive->dn & 1); diff --git a/drivers/ide/cmd64x.c b/drivers/ide/cmd64x.c index f2500c8826b..5f80312e636 100644 --- a/drivers/ide/cmd64x.c +++ b/drivers/ide/cmd64x.c @@ -7,6 +7,7 @@ * Copyright (C) 1998 David S. Miller (davem@redhat.com) * * Copyright (C) 1999-2002 Andre Hedrick <andre@linux-ide.org> + * Copyright (C) 2007-2010 Bartlomiej Zolnierkiewicz * Copyright (C) 2007,2009 MontaVista Software, Inc. <source@mvista.com> */ @@ -50,72 +51,42 @@ #define UDIDETCR1 0x7B #define DTPR1 0x7C -static u8 quantize_timing(int timing, int quant) -{ - return (timing + quant - 1) / quant; -} - -/* - * This routine calculates active/recovery counts and then writes them into - * the chipset registers. - */ -static void program_cycle_times (ide_drive_t *drive, int cycle_time, int active_time) +static void cmd64x_program_timings(ide_drive_t *drive, u8 mode) { + ide_hwif_t *hwif = drive->hwif; struct pci_dev *dev = to_pci_dev(drive->hwif->dev); - int clock_time = 1000 / (ide_pci_clk ? ide_pci_clk : 33); - u8 cycle_count, active_count, recovery_count, drwtim; + int bus_speed = ide_pci_clk ? ide_pci_clk : 33; + const unsigned long T = 1000000 / bus_speed; static const u8 recovery_values[] = {15, 15, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 0}; + static const u8 setup_values[] = {0x40, 0x40, 0x40, 0x80, 0, 0xc0}; + static const u8 arttim_regs[4] = {ARTTIM0, ARTTIM1, ARTTIM23, ARTTIM23}; static const u8 drwtim_regs[4] = {DRWTIM0, DRWTIM1, DRWTIM2, DRWTIM3}; + struct ide_timing t; + u8 arttim = 0; - cycle_count = quantize_timing( cycle_time, clock_time); - active_count = quantize_timing(active_time, clock_time); - recovery_count = cycle_count - active_count; + ide_timing_compute(drive, mode, &t, T, 0); /* * In case we've got too long recovery phase, try to lengthen * the active phase */ - if (recovery_count > 16) { - active_count += recovery_count - 16; - recovery_count = 16; + if (t.recover > 16) { + t.active += t.recover - 16; + t.recover = 16; } - if (active_count > 16) /* shouldn't actually happen... */ - active_count = 16; + if (t.active > 16) /* shouldn't actually happen... */ + t.active = 16; /* * Convert values to internal chipset representation */ - recovery_count = recovery_values[recovery_count]; - active_count &= 0x0f; + t.recover = recovery_values[t.recover]; + t.active &= 0x0f; /* Program the active/recovery counts into the DRWTIM register */ - drwtim = (active_count << 4) | recovery_count; - (void) pci_write_config_byte(dev, drwtim_regs[drive->dn], drwtim); -} - -/* - * This routine writes into the chipset registers - * PIO setup/active/recovery timings. - */ -static void cmd64x_tune_pio(ide_drive_t *drive, const u8 pio) -{ - ide_hwif_t *hwif = drive->hwif; - struct pci_dev *dev = to_pci_dev(hwif->dev); - struct ide_timing *t = ide_timing_find_mode(XFER_PIO_0 + pio); - unsigned long setup_count; - unsigned int cycle_time; - u8 arttim = 0; - - static const u8 setup_values[] = {0x40, 0x40, 0x40, 0x80, 0, 0xc0}; - static const u8 arttim_regs[4] = {ARTTIM0, ARTTIM1, ARTTIM23, ARTTIM23}; - - cycle_time = ide_pio_cycle_time(drive, pio); - - program_cycle_times(drive, cycle_time, t->active); - - setup_count = quantize_timing(t->setup, - 1000 / (ide_pci_clk ? ide_pci_clk : 33)); + pci_write_config_byte(dev, drwtim_regs[drive->dn], + (t.active << 4) | t.recover); /* * The primary channel has individual address setup timing registers @@ -126,15 +97,21 @@ static void cmd64x_tune_pio(ide_drive_t *drive, const u8 pio) if (hwif->channel) { ide_drive_t *pair = ide_get_pair_dev(drive); - ide_set_drivedata(drive, (void *)setup_count); + if (pair) { + struct ide_timing tp; - if (pair) - setup_count = max_t(u8, setup_count, - (unsigned long)ide_get_drivedata(pair)); + ide_timing_compute(pair, pair->pio_mode, &tp, T, 0); + ide_timing_merge(&t, &tp, &t, IDE_TIMING_SETUP); + if (pair->dma_mode) { + ide_timing_compute(pair, pair->dma_mode, + &tp, T, 0); + ide_timing_merge(&tp, &t, &t, IDE_TIMING_SETUP); + } + } } - if (setup_count > 5) /* shouldn't actually happen... */ - setup_count = 5; + if (t.setup > 5) /* shouldn't actually happen... */ + t.setup = 5; /* * Program the address setup clocks into the ARTTIM registers. @@ -144,7 +121,7 @@ static void cmd64x_tune_pio(ide_drive_t *drive, const u8 pio) if (hwif->channel) arttim &= ~ARTTIM23_INTR_CH1; arttim &= ~0xc0; - arttim |= setup_values[setup_count]; + arttim |= setup_values[t.setup]; (void) pci_write_config_byte(dev, arttim_regs[drive->dn], arttim); } @@ -153,8 +130,10 @@ static void cmd64x_tune_pio(ide_drive_t *drive, const u8 pio) * Special cases are 8: prefetch off, 9: prefetch on (both never worked) */ -static void cmd64x_set_pio_mode(ide_drive_t *drive, const u8 pio) +static void cmd64x_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive) { + const u8 pio = drive->pio_mode - XFER_PIO_0; + /* * Filter out the prefetch control values * to prevent PIO5 from being programmed @@ -162,20 +141,18 @@ static void cmd64x_set_pio_mode(ide_drive_t *drive, const u8 pio) if (pio == 8 || pio == 9) return; - cmd64x_tune_pio(drive, pio); + cmd64x_program_timings(drive, XFER_PIO_0 + pio); } -static void cmd64x_set_dma_mode(ide_drive_t *drive, const u8 speed) +static void cmd64x_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive) { - ide_hwif_t *hwif = drive->hwif; struct pci_dev *dev = to_pci_dev(hwif->dev); u8 unit = drive->dn & 0x01; u8 regU = 0, pciU = hwif->channel ? UDIDETCR1 : UDIDETCR0; + const u8 speed = drive->dma_mode; - if (speed >= XFER_SW_DMA_0) { - (void) pci_read_config_byte(dev, pciU, ®U); - regU &= ~(unit ? 0xCA : 0x35); - } + pci_read_config_byte(dev, pciU, ®U); + regU &= ~(unit ? 0xCA : 0x35); switch(speed) { case XFER_UDMA_5: @@ -197,18 +174,13 @@ static void cmd64x_set_dma_mode(ide_drive_t *drive, const u8 speed) regU |= unit ? 0xC2 : 0x31; break; case XFER_MW_DMA_2: - program_cycle_times(drive, 120, 70); - break; case XFER_MW_DMA_1: - program_cycle_times(drive, 150, 80); - break; case XFER_MW_DMA_0: - program_cycle_times(drive, 480, 215); + cmd64x_program_timings(drive, speed); break; } - if (speed >= XFER_SW_DMA_0) - (void) pci_write_config_byte(dev, pciU, regU); + pci_write_config_byte(dev, pciU, regU); } static void cmd648_clear_irq(ide_drive_t *drive) @@ -471,6 +443,6 @@ static void __exit cmd64x_ide_exit(void) module_init(cmd64x_ide_init); module_exit(cmd64x_ide_exit); -MODULE_AUTHOR("Eddie Dost, David Miller, Andre Hedrick"); +MODULE_AUTHOR("Eddie Dost, David Miller, Andre Hedrick, Bartlomiej Zolnierkiewicz"); MODULE_DESCRIPTION("PCI driver module for CMD64x IDE"); MODULE_LICENSE("GPL"); diff --git a/drivers/ide/cs5520.c b/drivers/ide/cs5520.c index 09f98ed0731..2c1e5f7cd26 100644 --- a/drivers/ide/cs5520.c +++ b/drivers/ide/cs5520.c @@ -57,11 +57,11 @@ static struct pio_clocks cs5520_pio_clocks[]={ {1, 2, 1} }; -static void cs5520_set_pio_mode(ide_drive_t *drive, const u8 pio) +static void cs5520_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive) { - ide_hwif_t *hwif = drive->hwif; struct pci_dev *pdev = to_pci_dev(hwif->dev); int controller = drive->dn > 1 ? 1 : 0; + const u8 pio = drive->pio_mode - XFER_PIO_0; /* 8bit CAT/CRT - 8bit command timing for channel */ pci_write_config_byte(pdev, 0x62 + controller, @@ -81,11 +81,12 @@ static void cs5520_set_pio_mode(ide_drive_t *drive, const u8 pio) (cs5520_pio_clocks[pio].assert)); } -static void cs5520_set_dma_mode(ide_drive_t *drive, const u8 speed) +static void cs5520_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive) { printk(KERN_ERR "cs55x0: bad ide timing.\n"); - cs5520_set_pio_mode(drive, 0); + drive->pio_mode = XFER_PIO_0 + 0; + cs5520_set_pio_mode(hwif, drive); } static const struct ide_port_ops cs5520_port_ops = { diff --git a/drivers/ide/cs5530.c b/drivers/ide/cs5530.c index 40bf05eddf6..4dc4eb92b07 100644 --- a/drivers/ide/cs5530.c +++ b/drivers/ide/cs5530.c @@ -41,8 +41,8 @@ static unsigned int cs5530_pio_timings[2][5] = { /** * cs5530_set_pio_mode - set host controller for PIO mode + * @hwif: port * @drive: drive - * @pio: PIO mode number * * Handles setting of PIO mode for the chipset. * @@ -50,10 +50,11 @@ static unsigned int cs5530_pio_timings[2][5] = { * will have valid default PIO timings set up before we get here. */ -static void cs5530_set_pio_mode(ide_drive_t *drive, const u8 pio) +static void cs5530_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive) { - unsigned long basereg = CS5530_BASEREG(drive->hwif); + unsigned long basereg = CS5530_BASEREG(hwif); unsigned int format = (inl(basereg + 4) >> 31) & 1; + const u8 pio = drive->pio_mode - XFER_PIO_0; outl(cs5530_pio_timings[format][pio], basereg + ((drive->dn & 1)<<3)); } @@ -99,12 +100,12 @@ out: return mask; } -static void cs5530_set_dma_mode(ide_drive_t *drive, const u8 mode) +static void cs5530_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive) { unsigned long basereg; unsigned int reg, timings = 0; - switch (mode) { + switch (drive->dma_mode) { case XFER_UDMA_0: timings = 0x00921250; break; case XFER_UDMA_1: timings = 0x00911140; break; case XFER_UDMA_2: timings = 0x00911030; break; @@ -112,7 +113,7 @@ static void cs5530_set_dma_mode(ide_drive_t *drive, const u8 mode) case XFER_MW_DMA_1: timings = 0x00012121; break; case XFER_MW_DMA_2: timings = 0x00002020; break; } - basereg = CS5530_BASEREG(drive->hwif); + basereg = CS5530_BASEREG(hwif); reg = inl(basereg + 4); /* get drive0 config register */ timings |= reg & 0x80000000; /* preserve PIO format bit */ if ((drive-> dn & 1) == 0) { /* are we configuring drive0? */ diff --git a/drivers/ide/cs5535.c b/drivers/ide/cs5535.c index b883838adc2..5059fafadf2 100644 --- a/drivers/ide/cs5535.c +++ b/drivers/ide/cs5535.c @@ -86,7 +86,7 @@ static void cs5535_set_speed(ide_drive_t *drive, const u8 speed) cmd = pioa = speed - XFER_PIO_0; if (pair) { - u8 piob = ide_get_best_pio_mode(pair, 255, 4); + u8 piob = pair->pio_mode - XFER_PIO_0; if (piob < cmd) cmd = piob; @@ -129,28 +129,28 @@ static void cs5535_set_speed(ide_drive_t *drive, const u8 speed) /** * cs5535_set_dma_mode - set host controller for DMA mode + * @hwif: port * @drive: drive - * @speed: DMA mode * * Programs the chipset for DMA mode. */ -static void cs5535_set_dma_mode(ide_drive_t *drive, const u8 speed) +static void cs5535_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive) { - cs5535_set_speed(drive, speed); + cs5535_set_speed(drive, drive->dma_mode); } /** * cs5535_set_pio_mode - set host controller for PIO mode + * @hwif: port * @drive: drive - * @pio: PIO mode number * * A callback from the upper layers for PIO-only tuning. */ -static void cs5535_set_pio_mode(ide_drive_t *drive, const u8 pio) +static void cs5535_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive) { - cs5535_set_speed(drive, XFER_PIO_0 + pio); + cs5535_set_speed(drive, drive->pio_mode); } static u8 cs5535_cable_detect(ide_hwif_t *hwif) diff --git a/drivers/ide/cs5536.c b/drivers/ide/cs5536.c index 9623b852c61..24214ab60ac 100644 --- a/drivers/ide/cs5536.c +++ b/drivers/ide/cs5536.c @@ -125,11 +125,11 @@ static u8 cs5536_cable_detect(ide_hwif_t *hwif) /** * cs5536_set_pio_mode - PIO timing setup + * @hwif: ATA port * @drive: ATA device - * @pio: PIO mode number */ -static void cs5536_set_pio_mode(ide_drive_t *drive, const u8 pio) +static void cs5536_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive) { static const u8 drv_timings[5] = { 0x98, 0x55, 0x32, 0x21, 0x20, @@ -143,15 +143,16 @@ static void cs5536_set_pio_mode(ide_drive_t *drive, const u8 pio) 0x99, 0x92, 0x90, 0x22, 0x20, }; - struct pci_dev *pdev = to_pci_dev(drive->hwif->dev); + struct pci_dev *pdev = to_pci_dev(hwif->dev); ide_drive_t *pair = ide_get_pair_dev(drive); int cshift = (drive->dn & 1) ? IDE_CAST_D1_SHIFT : IDE_CAST_D0_SHIFT; unsigned long timings = (unsigned long)ide_get_drivedata(drive); u32 cast; + const u8 pio = drive->pio_mode - XFER_PIO_0; u8 cmd_pio = pio; if (pair) - cmd_pio = min(pio, ide_get_best_pio_mode(pair, 255, 4)); + cmd_pio = min_t(u8, pio, pair->pio_mode - XFER_PIO_0); timings &= (IDE_DRV_MASK << 8); timings |= drv_timings[pio]; @@ -172,11 +173,11 @@ static void cs5536_set_pio_mode(ide_drive_t *drive, const u8 pio) /** * cs5536_set_dma_mode - DMA timing setup + * @hwif: ATA port * @drive: ATA device - * @mode: DMA mode */ -static void cs5536_set_dma_mode(ide_drive_t *drive, const u8 mode) +static void cs5536_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive) { static const u8 udma_timings[6] = { 0xc2, 0xc1, 0xc0, 0xc4, 0xc5, 0xc6, @@ -186,10 +187,11 @@ static void cs5536_set_dma_mode(ide_drive_t *drive, const u8 mode) 0x67, 0x21, 0x20, }; - struct pci_dev *pdev = to_pci_dev(drive->hwif->dev); + struct pci_dev *pdev = to_pci_dev(hwif->dev); int dshift = (drive->dn & 1) ? IDE_D1_SHIFT : IDE_D0_SHIFT; unsigned long timings = (unsigned long)ide_get_drivedata(drive); u32 etc; + const u8 mode = drive->dma_mode; cs5536_read(pdev, ETC, &etc); diff --git a/drivers/ide/cy82c693.c b/drivers/ide/cy82c693.c index d6e2cbbc53a..9383f67deae 100644 --- a/drivers/ide/cy82c693.c +++ b/drivers/ide/cy82c693.c @@ -1,43 +1,11 @@ /* * Copyright (C) 1998-2000 Andreas S. Krebs (akrebs@altavista.net), Maintainer * Copyright (C) 1998-2002 Andre Hedrick <andre@linux-ide.org>, Integrator + * Copyright (C) 2007-2010 Bartlomiej Zolnierkiewicz * * CYPRESS CY82C693 chipset IDE controller * * The CY82C693 chipset is used on Digital's PC-Alpha 164SX boards. - * Writing the driver was quite simple, since most of the job is - * done by the generic pci-ide support. - * The hard part was finding the CY82C693's datasheet on Cypress's - * web page :-(. But Altavista solved this problem :-). - * - * - * Notes: - * - I recently got a 16.8G IBM DTTA, so I was able to test it with - * a large and fast disk - the results look great, so I'd say the - * driver is working fine :-) - * hdparm -t reports 8.17 MB/sec at about 6% CPU usage for the DTTA - * - this is my first linux driver, so there's probably a lot of room - * for optimizations and bug fixing, so feel free to do it. - * - if using PIO mode it's a good idea to set the PIO mode and - * 32-bit I/O support (if possible), e.g. hdparm -p2 -c1 /dev/hda - * - I had some problems with my IBM DHEA with PIO modes < 2 - * (lost interrupts) ????? - * - first tests with DMA look okay, they seem to work, but there is a - * problem with sound - the BusMaster IDE TimeOut should fixed this - * - * Ancient History: - * AMH@1999-08-24: v0.34 init_cy82c693_chip moved to pci_init_cy82c693 - * ASK@1999-01-23: v0.33 made a few minor code clean ups - * removed DMA clock speed setting by default - * added boot message - * ASK@1998-11-01: v0.32 added support to set BusMaster IDE TimeOut - * added support to set DMA Controller Clock Speed - * ASK@1998-10-31: v0.31 fixed problem with setting to high DMA modes - * on some drives. - * ASK@1998-10-29: v0.3 added support to set DMA modes - * ASK@1998-10-28: v0.2 added support to set PIO modes - * ASK@1998-10-27: v0.1 first version - chipset detection - * */ #include <linux/module.h> @@ -81,87 +49,13 @@ #define CY82_INDEX_CHANNEL1 0x31 #define CY82_INDEX_TIMEOUT 0x32 -/* the min and max PCI bus speed in MHz - from datasheet */ -#define CY82C963_MIN_BUS_SPEED 25 -#define CY82C963_MAX_BUS_SPEED 33 - -/* the struct for the PIO mode timings */ -typedef struct pio_clocks_s { - u8 address_time; /* Address setup (clocks) */ - u8 time_16r; /* clocks for 16bit IOR (0xF0=Active/data, 0x0F=Recovery) */ - u8 time_16w; /* clocks for 16bit IOW (0xF0=Active/data, 0x0F=Recovery) */ - u8 time_8; /* clocks for 8bit (0xF0=Active/data, 0x0F=Recovery) */ -} pio_clocks_t; - -/* - * calc clocks using bus_speed - * returns (rounded up) time in bus clocks for time in ns - */ -static int calc_clk(int time, int bus_speed) -{ - int clocks; - - clocks = (time*bus_speed+999)/1000 - 1; - - if (clocks < 0) - clocks = 0; - - if (clocks > 0x0F) - clocks = 0x0F; - - return clocks; -} - -/* - * compute the values for the clock registers for PIO - * mode and pci_clk [MHz] speed - * - * NOTE: for mode 0,1 and 2 drives 8-bit IDE command control registers are used - * for mode 3 and 4 drives 8 and 16-bit timings are the same - * - */ -static void compute_clocks(u8 pio, pio_clocks_t *p_pclk) -{ - struct ide_timing *t = ide_timing_find_mode(XFER_PIO_0 + pio); - int clk1, clk2; - int bus_speed = ide_pci_clk ? ide_pci_clk : 33; - - /* we don't check against CY82C693's min and max speed, - * so you can play with the idebus=xx parameter - */ - - /* let's calc the address setup time clocks */ - p_pclk->address_time = (u8)calc_clk(t->setup, bus_speed); - - /* let's calc the active and recovery time clocks */ - clk1 = calc_clk(t->active, bus_speed); - - /* calc recovery timing */ - clk2 = t->cycle - t->active - t->setup; - - clk2 = calc_clk(clk2, bus_speed); - - clk1 = (clk1<<4)|clk2; /* combine active and recovery clocks */ - - /* note: we use the same values for 16bit IOR and IOW - * those are all the same, since I don't have other - * timings than those from ide-lib.c - */ - - p_pclk->time_16r = (u8)clk1; - p_pclk->time_16w = (u8)clk1; - - /* what are good values for 8bit ?? */ - p_pclk->time_8 = (u8)clk1; -} - /* * set DMA mode a specific channel for CY82C693 */ -static void cy82c693_set_dma_mode(ide_drive_t *drive, const u8 mode) +static void cy82c693_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive) { - ide_hwif_t *hwif = drive->hwif; + const u8 mode = drive->dma_mode; u8 single = (mode & 0x10) >> 4, index = 0, data = 0; index = hwif->channel ? CY82_INDEX_CHANNEL1 : CY82_INDEX_CHANNEL0; @@ -186,12 +80,14 @@ static void cy82c693_set_dma_mode(ide_drive_t *drive, const u8 mode) outb(data, CY82_DATA_PORT); } -static void cy82c693_set_pio_mode(ide_drive_t *drive, const u8 pio) +static void cy82c693_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive) { - ide_hwif_t *hwif = drive->hwif; struct pci_dev *dev = to_pci_dev(hwif->dev); - pio_clocks_t pclk; + int bus_speed = ide_pci_clk ? ide_pci_clk : 33; + const unsigned long T = 1000000 / bus_speed; unsigned int addrCtrl; + struct ide_timing t; + u8 time_16, time_8; /* select primary or secondary channel */ if (hwif->index > 0) { /* drive is on the secondary channel */ @@ -204,8 +100,12 @@ static void cy82c693_set_pio_mode(ide_drive_t *drive, const u8 pio) } } - /* let's calc the values for this PIO mode */ - compute_clocks(pio, &pclk); + ide_timing_compute(drive, drive->pio_mode, &t, T, 1); + + time_16 = clamp_val(t.recover - 1, 0, 15) | + (clamp_val(t.active - 1, 0, 15) << 4); + time_8 = clamp_val(t.act8b - 1, 0, 15) | + (clamp_val(t.rec8b - 1, 0, 15) << 4); /* now let's write the clocks registers */ if ((drive->dn & 1) == 0) { @@ -217,13 +117,13 @@ static void cy82c693_set_pio_mode(ide_drive_t *drive, const u8 pio) pci_read_config_dword(dev, CY82_IDE_ADDRSETUP, &addrCtrl); addrCtrl &= (~0xF); - addrCtrl |= (unsigned int)pclk.address_time; + addrCtrl |= clamp_val(t.setup - 1, 0, 15); pci_write_config_dword(dev, CY82_IDE_ADDRSETUP, addrCtrl); /* now let's set the remaining registers */ - pci_write_config_byte(dev, CY82_IDE_MASTER_IOR, pclk.time_16r); - pci_write_config_byte(dev, CY82_IDE_MASTER_IOW, pclk.time_16w); - pci_write_config_byte(dev, CY82_IDE_MASTER_8BIT, pclk.time_8); + pci_write_config_byte(dev, CY82_IDE_MASTER_IOR, time_16); + pci_write_config_byte(dev, CY82_IDE_MASTER_IOW, time_16); + pci_write_config_byte(dev, CY82_IDE_MASTER_8BIT, time_8); } else { /* * set slave drive @@ -233,13 +133,13 @@ static void cy82c693_set_pio_mode(ide_drive_t *drive, const u8 pio) pci_read_config_dword(dev, CY82_IDE_ADDRSETUP, &addrCtrl); addrCtrl &= (~0xF0); - addrCtrl |= ((unsigned int)pclk.address_time<<4); + addrCtrl |= (clamp_val(t.setup - 1, 0, 15) << 4); pci_write_config_dword(dev, CY82_IDE_ADDRSETUP, addrCtrl); /* now let's set the remaining registers */ - pci_write_config_byte(dev, CY82_IDE_SLAVE_IOR, pclk.time_16r); - pci_write_config_byte(dev, CY82_IDE_SLAVE_IOW, pclk.time_16w); - pci_write_config_byte(dev, CY82_IDE_SLAVE_8BIT, pclk.time_8); + pci_write_config_byte(dev, CY82_IDE_SLAVE_IOR, time_16); + pci_write_config_byte(dev, CY82_IDE_SLAVE_IOW, time_16); + pci_write_config_byte(dev, CY82_IDE_SLAVE_8BIT, time_8); } } @@ -325,6 +225,6 @@ static void __exit cy82c693_ide_exit(void) module_init(cy82c693_ide_init); module_exit(cy82c693_ide_exit); -MODULE_AUTHOR("Andreas Krebs, Andre Hedrick"); +MODULE_AUTHOR("Andreas Krebs, Andre Hedrick, Bartlomiej Zolnierkiewicz"); MODULE_DESCRIPTION("PCI driver module for the Cypress CY82C693 IDE"); MODULE_LICENSE("GPL"); diff --git a/drivers/ide/dtc2278.c b/drivers/ide/dtc2278.c index c6b13812298..6929f7fce93 100644 --- a/drivers/ide/dtc2278.c +++ b/drivers/ide/dtc2278.c @@ -68,11 +68,11 @@ static void sub22 (char b, char c) static DEFINE_SPINLOCK(dtc2278_lock); -static void dtc2278_set_pio_mode(ide_drive_t *drive, const u8 pio) +static void dtc2278_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive) { unsigned long flags; - if (pio >= 3) { + if (drive->pio_mode >= XFER_PIO_3) { spin_lock_irqsave(&dtc2278_lock, flags); /* * This enables PIO mode4 (3?) on the first interface diff --git a/drivers/ide/hpt366.c b/drivers/ide/hpt366.c index 4d90ac2dbb1..b885c1d548f 100644 --- a/drivers/ide/hpt366.c +++ b/drivers/ide/hpt366.c @@ -627,14 +627,14 @@ static u32 get_speed_setting(u8 speed, struct hpt_info *info) return info->timings->clock_table[info->clock][i]; } -static void hpt3xx_set_mode(ide_drive_t *drive, const u8 speed) +static void hpt3xx_set_mode(ide_hwif_t *hwif, ide_drive_t *drive) { - ide_hwif_t *hwif = drive->hwif; struct pci_dev *dev = to_pci_dev(hwif->dev); struct hpt_info *info = hpt3xx_get_info(hwif->dev); struct hpt_timings *t = info->timings; u8 itr_addr = 0x40 + (drive->dn * 4); u32 old_itr = 0; + const u8 speed = drive->dma_mode; u32 new_itr = get_speed_setting(speed, info); u32 itr_mask = speed < XFER_MW_DMA_0 ? t->pio_mask : (speed < XFER_UDMA_0 ? t->dma_mask : @@ -651,9 +651,10 @@ static void hpt3xx_set_mode(ide_drive_t *drive, const u8 speed) pci_write_config_dword(dev, itr_addr, new_itr); } -static void hpt3xx_set_pio_mode(ide_drive_t *drive, const u8 pio) +static void hpt3xx_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive) { - hpt3xx_set_mode(drive, XFER_PIO_0 + pio); + drive->dma_mode = drive->pio_mode; + hpt3xx_set_mode(hwif, drive); } static void hpt3xx_maskproc(ide_drive_t *drive, int mask) diff --git a/drivers/ide/ht6560b.c b/drivers/ide/ht6560b.c index aafed8060e1..d81e49680c3 100644 --- a/drivers/ide/ht6560b.c +++ b/drivers/ide/ht6560b.c @@ -279,9 +279,10 @@ static void ht_set_prefetch(ide_drive_t *drive, u8 state) #endif } -static void ht6560b_set_pio_mode(ide_drive_t *drive, const u8 pio) +static void ht6560b_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive) { unsigned long flags, config; + const u8 pio = drive->pio_mode - XFER_PIO_0; u8 timing; switch (pio) { diff --git a/drivers/ide/icside.c b/drivers/ide/icside.c index 0f67f1abbbd..4a697a238e2 100644 --- a/drivers/ide/icside.c +++ b/drivers/ide/icside.c @@ -65,6 +65,8 @@ static struct cardinfo icside_cardinfo_v6_2 = { }; struct icside_state { + unsigned int channel; + unsigned int enabled; void __iomem *irq_port; void __iomem *ioc_base; unsigned int sel; @@ -114,11 +116,18 @@ static void icside_irqenable_arcin_v6 (struct expansion_card *ec, int irqnr) struct icside_state *state = ec->irq_data; void __iomem *base = state->irq_port; - writeb(0, base + ICS_ARCIN_V6_INTROFFSET_1); - readb(base + ICS_ARCIN_V6_INTROFFSET_2); + state->enabled = 1; - writeb(0, base + ICS_ARCIN_V6_INTROFFSET_2); - readb(base + ICS_ARCIN_V6_INTROFFSET_1); + switch (state->channel) { + case 0: + writeb(0, base + ICS_ARCIN_V6_INTROFFSET_1); + readb(base + ICS_ARCIN_V6_INTROFFSET_2); + break; + case 1: + writeb(0, base + ICS_ARCIN_V6_INTROFFSET_2); + readb(base + ICS_ARCIN_V6_INTROFFSET_1); + break; + } } /* Prototype: icside_irqdisable_arcin_v6 (struct expansion_card *ec, int irqnr) @@ -128,6 +137,8 @@ static void icside_irqdisable_arcin_v6 (struct expansion_card *ec, int irqnr) { struct icside_state *state = ec->irq_data; + state->enabled = 0; + readb(state->irq_port + ICS_ARCIN_V6_INTROFFSET_1); readb(state->irq_port + ICS_ARCIN_V6_INTROFFSET_2); } @@ -149,6 +160,44 @@ static const expansioncard_ops_t icside_ops_arcin_v6 = { .irqpending = icside_irqpending_arcin_v6, }; +/* + * Handle routing of interrupts. This is called before + * we write the command to the drive. + */ +static void icside_maskproc(ide_drive_t *drive, int mask) +{ + ide_hwif_t *hwif = drive->hwif; + struct expansion_card *ec = ECARD_DEV(hwif->dev); + struct icside_state *state = ecard_get_drvdata(ec); + unsigned long flags; + + local_irq_save(flags); + + state->channel = hwif->channel; + + if (state->enabled && !mask) { + switch (hwif->channel) { + case 0: + writeb(0, state->irq_port + ICS_ARCIN_V6_INTROFFSET_1); + readb(state->irq_port + ICS_ARCIN_V6_INTROFFSET_2); + break; + case 1: + writeb(0, state->irq_port + ICS_ARCIN_V6_INTROFFSET_2); + readb(state->irq_port + ICS_ARCIN_V6_INTROFFSET_1); + break; + } + } else { + readb(state->irq_port + ICS_ARCIN_V6_INTROFFSET_2); + readb(state->irq_port + ICS_ARCIN_V6_INTROFFSET_1); + } + + local_irq_restore(flags); +} + +static const struct ide_port_ops icside_v6_no_dma_port_ops = { + .maskproc = icside_maskproc, +}; + #ifdef CONFIG_BLK_DEV_IDEDMA_ICS /* * SG-DMA support. @@ -185,10 +234,11 @@ static const expansioncard_ops_t icside_ops_arcin_v6 = { * MW1 80 50 50 150 C * MW2 70 25 25 120 C */ -static void icside_set_dma_mode(ide_drive_t *drive, const u8 xfer_mode) +static void icside_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive) { unsigned long cycle_time; int use_dma_info = 0; + const u8 xfer_mode = drive->dma_mode; switch (xfer_mode) { case XFER_MW_DMA_2: @@ -228,6 +278,7 @@ static void icside_set_dma_mode(ide_drive_t *drive, const u8 xfer_mode) static const struct ide_port_ops icside_v6_port_ops = { .set_dma_mode = icside_set_dma_mode, + .maskproc = icside_maskproc, }; static void icside_dma_host_set(ide_drive_t *drive, int on) @@ -272,6 +323,11 @@ static int icside_dma_setup(ide_drive_t *drive, struct ide_cmd *cmd) BUG_ON(dma_channel_active(ec->dma)); /* + * Ensure that we have the right interrupt routed. + */ + icside_maskproc(drive, 0); + + /* * Route the DMA signals to the correct interface. */ writeb(state->sel | hwif->channel, state->ioc_base); @@ -399,6 +455,7 @@ err_free: static const struct ide_port_info icside_v6_port_info __initdata = { .init_dma = icside_dma_off_init, + .port_ops = &icside_v6_no_dma_port_ops, .dma_ops = &icside_v6_dma_ops, .host_flags = IDE_HFLAG_SERIALIZE | IDE_HFLAG_MMIO, .mwdma_mask = ATA_MWDMA2, diff --git a/drivers/ide/ide-cs.c b/drivers/ide/ide-cs.c index dd6396384c2..ab87e4f7cec 100644 --- a/drivers/ide/ide-cs.c +++ b/drivers/ide/ide-cs.c @@ -121,19 +121,11 @@ static int ide_probe(struct pcmcia_device *link) static void ide_detach(struct pcmcia_device *link) { ide_info_t *info = link->priv; - ide_hwif_t *hwif = info->host->ports[0]; - unsigned long data_addr, ctl_addr; dev_dbg(&link->dev, "ide_detach(0x%p)\n", link); - data_addr = hwif->io_ports.data_addr; - ctl_addr = hwif->io_ports.ctl_addr; - ide_release(link); - release_region(ctl_addr, 1); - release_region(data_addr, 8); - kfree(info); } /* ide_detach */ @@ -354,12 +346,19 @@ static void ide_release(struct pcmcia_device *link) dev_dbg(&link->dev, "ide_release(0x%p)\n", link); - if (info->ndev) - /* FIXME: if this fails we need to queue the cleanup somehow - -- need to investigate the required PCMCIA magic */ + if (info->ndev) { + ide_hwif_t *hwif = host->ports[0]; + unsigned long data_addr, ctl_addr; + + data_addr = hwif->io_ports.data_addr; + ctl_addr = hwif->io_ports.ctl_addr; + ide_host_remove(host); + info->ndev = 0; - info->ndev = 0; + release_region(ctl_addr, 1); + release_region(data_addr, 8); + } pcmcia_disable_device(link); } /* ide_release */ diff --git a/drivers/ide/ide-devsets.c b/drivers/ide/ide-devsets.c index 1099bf7cf96..c6935c78757 100644 --- a/drivers/ide/ide-devsets.c +++ b/drivers/ide/ide-devsets.c @@ -105,15 +105,17 @@ static int set_pio_mode(ide_drive_t *drive, int arg) return -ENOSYS; if (set_pio_mode_abuse(drive->hwif, arg)) { + drive->pio_mode = arg + XFER_PIO_0; + if (arg == 8 || arg == 9) { unsigned long flags; /* take lock for IDE_DFLAG_[NO_]UNMASK/[NO_]IO_32BIT */ spin_lock_irqsave(&hwif->lock, flags); - port_ops->set_pio_mode(drive, arg); + port_ops->set_pio_mode(hwif, drive); spin_unlock_irqrestore(&hwif->lock, flags); } else - port_ops->set_pio_mode(drive, arg); + port_ops->set_pio_mode(hwif, drive); } else { int keep_dma = !!(drive->dev_flags & IDE_DFLAG_USING_DMA); diff --git a/drivers/ide/ide-iops.c b/drivers/ide/ide-iops.c index 222c1ef65fb..376f2dc410c 100644 --- a/drivers/ide/ide-iops.c +++ b/drivers/ide/ide-iops.c @@ -231,7 +231,7 @@ u8 eighty_ninty_three(ide_drive_t *drive) u16 *id = drive->id; int ivb = ide_in_drive_list(id, ivb_list); - if (hwif->cbl == ATA_CBL_PATA40_SHORT) + if (hwif->cbl == ATA_CBL_SATA || hwif->cbl == ATA_CBL_PATA40_SHORT) return 1; if (ivb) diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c index f8c1ae6ad74..fbedd35feb4 100644 --- a/drivers/ide/ide-probe.c +++ b/drivers/ide/ide-probe.c @@ -1042,6 +1042,8 @@ static void ide_port_init_devices(ide_hwif_t *hwif) if (hwif->host_flags & IDE_HFLAG_NO_UNMASK_IRQS) drive->dev_flags |= IDE_DFLAG_NO_UNMASK; + drive->pio_mode = XFER_PIO_0; + if (port_ops && port_ops->init_dev) port_ops->init_dev(drive); } diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index 6a0e6254216..b07232880ec 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -1365,7 +1365,7 @@ static int idetape_mtioctop(ide_drive_t *drive, short mt_op, int mt_count) * supported here, and not in the corresponding block interface. Our own * ide-tape ioctls are supported on both interfaces. */ -static int idetape_chrdev_ioctl(struct inode *inode, struct file *file, +static long do_idetape_chrdev_ioctl(struct file *file, unsigned int cmd, unsigned long arg) { struct ide_tape_obj *tape = file->private_data; @@ -1420,6 +1420,16 @@ static int idetape_chrdev_ioctl(struct inode *inode, struct file *file, } } +static long idetape_chrdev_ioctl(struct file *file, + unsigned int cmd, unsigned long arg) +{ + long ret; + lock_kernel(); + ret = do_idetape_chrdev_ioctl(file, cmd, arg); + unlock_kernel(); + return ret; +} + /* * Do a mode sense page 0 with block descriptor and if it succeeds set the tape * block size with the reported value. @@ -1888,7 +1898,7 @@ static const struct file_operations idetape_fops = { .owner = THIS_MODULE, .read = idetape_chrdev_read, .write = idetape_chrdev_write, - .ioctl = idetape_chrdev_ioctl, + .unlocked_ioctl = idetape_chrdev_ioctl, .open = idetape_chrdev_open, .release = idetape_chrdev_release, }; diff --git a/drivers/ide/ide-timings.c b/drivers/ide/ide-timings.c index 001a56365be..0e05f75934c 100644 --- a/drivers/ide/ide-timings.c +++ b/drivers/ide/ide-timings.c @@ -166,12 +166,13 @@ int ide_timing_compute(ide_drive_t *drive, u8 speed, if (id[ATA_ID_FIELD_VALID] & 2) { /* EIDE drive */ memset(&p, 0, sizeof(p)); - if (speed <= XFER_PIO_2) - p.cycle = p.cyc8b = id[ATA_ID_EIDE_PIO]; - else if ((speed <= XFER_PIO_4) || - (speed == XFER_PIO_5 && !ata_id_is_cfa(id))) - p.cycle = p.cyc8b = id[ATA_ID_EIDE_PIO_IORDY]; - else if (speed >= XFER_MW_DMA_0 && speed <= XFER_MW_DMA_2) + if (speed >= XFER_PIO_0 && speed < XFER_SW_DMA_0) { + if (speed <= XFER_PIO_2) + p.cycle = p.cyc8b = id[ATA_ID_EIDE_PIO]; + else if ((speed <= XFER_PIO_4) || + (speed == XFER_PIO_5 && !ata_id_is_cfa(id))) + p.cycle = p.cyc8b = id[ATA_ID_EIDE_PIO_IORDY]; + } else if (speed >= XFER_MW_DMA_0 && speed <= XFER_MW_DMA_2) p.cycle = id[ATA_ID_EIDE_DMA_MIN]; ide_timing_merge(&p, t, t, IDE_TIMING_CYCLE | IDE_TIMING_CYC8B); @@ -185,11 +186,10 @@ int ide_timing_compute(ide_drive_t *drive, u8 speed, /* * Even in DMA/UDMA modes we still use PIO access for IDENTIFY, * S.M.A.R.T and some other commands. We have to ensure that the - * DMA cycle timing is slower/equal than the fastest PIO timing. + * DMA cycle timing is slower/equal than the current PIO timing. */ if (speed >= XFER_SW_DMA_0) { - u8 pio = ide_get_best_pio_mode(drive, 255, 5); - ide_timing_compute(drive, XFER_PIO_0 + pio, &p, T, UT); + ide_timing_compute(drive, drive->pio_mode, &p, T, UT); ide_timing_merge(&p, t, t, IDE_TIMING_ALL); } diff --git a/drivers/ide/ide-xfer-mode.c b/drivers/ide/ide-xfer-mode.c index 46d203ce60c..5fc8d5c17de 100644 --- a/drivers/ide/ide-xfer-mode.c +++ b/drivers/ide/ide-xfer-mode.c @@ -58,7 +58,7 @@ EXPORT_SYMBOL(ide_xfer_verbose); * This is used by most chipset support modules when "auto-tuning". */ -u8 ide_get_best_pio_mode(ide_drive_t *drive, u8 mode_wanted, u8 max_mode) +static u8 ide_get_best_pio_mode(ide_drive_t *drive, u8 mode_wanted, u8 max_mode) { u16 *id = drive->id; int pio_mode = -1, overridden = 0; @@ -105,7 +105,6 @@ u8 ide_get_best_pio_mode(ide_drive_t *drive, u8 mode_wanted, u8 max_mode) return pio_mode; } -EXPORT_SYMBOL_GPL(ide_get_best_pio_mode); int ide_pio_need_iordy(ide_drive_t *drive, const u8 pio) { @@ -135,17 +134,20 @@ int ide_set_pio_mode(ide_drive_t *drive, const u8 mode) * set transfer mode on the device in ->set_pio_mode method... */ if (port_ops->set_dma_mode == NULL) { - port_ops->set_pio_mode(drive, mode - XFER_PIO_0); + drive->pio_mode = mode; + port_ops->set_pio_mode(hwif, drive); return 0; } if (hwif->host_flags & IDE_HFLAG_POST_SET_MODE) { if (ide_config_drive_speed(drive, mode)) return -1; - port_ops->set_pio_mode(drive, mode - XFER_PIO_0); + drive->pio_mode = mode; + port_ops->set_pio_mode(hwif, drive); return 0; } else { - port_ops->set_pio_mode(drive, mode - XFER_PIO_0); + drive->pio_mode = mode; + port_ops->set_pio_mode(hwif, drive); return ide_config_drive_speed(drive, mode); } } @@ -164,10 +166,12 @@ int ide_set_dma_mode(ide_drive_t *drive, const u8 mode) if (hwif->host_flags & IDE_HFLAG_POST_SET_MODE) { if (ide_config_drive_speed(drive, mode)) return -1; - port_ops->set_dma_mode(drive, mode); + drive->dma_mode = mode; + port_ops->set_dma_mode(hwif, drive); return 0; } else { - port_ops->set_dma_mode(drive, mode); + drive->dma_mode = mode; + port_ops->set_dma_mode(hwif, drive); return ide_config_drive_speed(drive, mode); } } diff --git a/drivers/ide/it8172.c b/drivers/ide/it8172.c index 0d266a5b524..560e66d0765 100644 --- a/drivers/ide/it8172.c +++ b/drivers/ide/it8172.c @@ -37,12 +37,12 @@ #define DRV_NAME "IT8172" -static void it8172_set_pio_mode(ide_drive_t *drive, const u8 pio) +static void it8172_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive) { - ide_hwif_t *hwif = drive->hwif; struct pci_dev *dev = to_pci_dev(hwif->dev); u16 drive_enables; u32 drive_timing; + const u8 pio = drive->pio_mode - XFER_PIO_0; /* * The highest value of DIOR/DIOW pulse width and recovery time @@ -77,14 +77,14 @@ static void it8172_set_pio_mode(ide_drive_t *drive, const u8 pio) pci_write_config_dword(dev, 0x44, drive_timing); } -static void it8172_set_dma_mode(ide_drive_t *drive, const u8 speed) +static void it8172_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive) { - ide_hwif_t *hwif = drive->hwif; struct pci_dev *dev = to_pci_dev(hwif->dev); int a_speed = 3 << (drive->dn * 4); int u_flag = 1 << drive->dn; int u_speed = 0; u8 reg48, reg4a; + const u8 speed = drive->dma_mode; pci_read_config_byte(dev, 0x48, ®48); pci_read_config_byte(dev, 0x4a, ®4a); @@ -98,14 +98,14 @@ static void it8172_set_dma_mode(ide_drive_t *drive, const u8 speed) pci_write_config_byte(dev, 0x4a, reg4a | u_speed); } else { const u8 mwdma_to_pio[] = { 0, 3, 4 }; - u8 pio; pci_write_config_byte(dev, 0x48, reg48 & ~u_flag); pci_write_config_byte(dev, 0x4a, reg4a & ~a_speed); - pio = mwdma_to_pio[speed - XFER_MW_DMA_0]; + drive->pio_mode = + mwdma_to_pio[speed - XFER_MW_DMA_0] + XFER_PIO_0; - it8172_set_pio_mode(drive, pio); + it8172_set_pio_mode(hwif, drive); } } diff --git a/drivers/ide/it8213.c b/drivers/ide/it8213.c index 47976167796..46816ba2641 100644 --- a/drivers/ide/it8213.c +++ b/drivers/ide/it8213.c @@ -17,15 +17,14 @@ /** * it8213_set_pio_mode - set host controller for PIO mode + * @hwif: port * @drive: drive - * @pio: PIO mode number * * Set the interface PIO mode. */ -static void it8213_set_pio_mode(ide_drive_t *drive, const u8 pio) +static void it8213_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive) { - ide_hwif_t *hwif = drive->hwif; struct pci_dev *dev = to_pci_dev(hwif->dev); int is_slave = drive->dn & 1; int master_port = 0x40; @@ -35,6 +34,7 @@ static void it8213_set_pio_mode(ide_drive_t *drive, const u8 pio) u8 slave_data; static DEFINE_SPINLOCK(tune_lock); int control = 0; + const u8 pio = drive->pio_mode - XFER_PIO_0; static const u8 timings[][2] = { { 0, 0 }, @@ -74,15 +74,14 @@ static void it8213_set_pio_mode(ide_drive_t *drive, const u8 pio) /** * it8213_set_dma_mode - set host controller for DMA mode + * @hwif: port * @drive: drive - * @speed: DMA mode * * Tune the ITE chipset for the DMA mode. */ -static void it8213_set_dma_mode(ide_drive_t *drive, const u8 speed) +static void it8213_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive) { - ide_hwif_t *hwif = drive->hwif; struct pci_dev *dev = to_pci_dev(hwif->dev); u8 maslave = 0x40; int a_speed = 3 << (drive->dn * 4); @@ -92,6 +91,7 @@ static void it8213_set_dma_mode(ide_drive_t *drive, const u8 speed) int u_speed = 0; u16 reg4042, reg4a; u8 reg48, reg54, reg55; + const u8 speed = drive->dma_mode; pci_read_config_word(dev, maslave, ®4042); pci_read_config_byte(dev, 0x48, ®48); @@ -120,7 +120,6 @@ static void it8213_set_dma_mode(ide_drive_t *drive, const u8 speed) pci_write_config_byte(dev, 0x54, reg54 & ~v_flag); } else { const u8 mwdma_to_pio[] = { 0, 3, 4 }; - u8 pio; if (reg48 & u_flag) pci_write_config_byte(dev, 0x48, reg48 & ~u_flag); @@ -132,11 +131,12 @@ static void it8213_set_dma_mode(ide_drive_t *drive, const u8 speed) pci_write_config_byte(dev, 0x55, (u8) reg55 & ~w_flag); if (speed >= XFER_MW_DMA_0) - pio = mwdma_to_pio[speed - XFER_MW_DMA_0]; + drive->pio_mode = + mwdma_to_pio[speed - XFER_MW_DMA_0] + XFER_PIO_0; else - pio = 2; /* only SWDMA2 is allowed */ + drive->pio_mode = XFER_PIO_2; /* for SWDMA2 */ - it8213_set_pio_mode(drive, pio); + it8213_set_pio_mode(hwif, drive); } } diff --git a/drivers/ide/it821x.c b/drivers/ide/it821x.c index 51aa745246d..b2709c73348 100644 --- a/drivers/ide/it821x.c +++ b/drivers/ide/it821x.c @@ -228,18 +228,18 @@ static void it821x_clock_strategy(ide_drive_t *drive) /** * it821x_set_pio_mode - set host controller for PIO mode + * @hwif: port * @drive: drive - * @pio: PIO mode number * * Tune the host to the desired PIO mode taking into the consideration * the maximum PIO mode supported by the other device on the cable. */ -static void it821x_set_pio_mode(ide_drive_t *drive, const u8 pio) +static void it821x_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive) { - ide_hwif_t *hwif = drive->hwif; struct it821x_dev *itdev = ide_get_hwifdata(hwif); ide_drive_t *pair = ide_get_pair_dev(drive); + const u8 pio = drive->pio_mode - XFER_PIO_0; u8 unit = drive->dn & 1, set_pio = pio; /* Spec says 89 ref driver uses 88 */ @@ -252,7 +252,7 @@ static void it821x_set_pio_mode(ide_drive_t *drive, const u8 pio) * on the cable. */ if (pair) { - u8 pair_pio = ide_get_best_pio_mode(pair, 255, 4); + u8 pair_pio = pair->pio_mode - XFER_PIO_0; /* trim PIO to the slowest of the master/slave */ if (pair_pio < set_pio) set_pio = pair_pio; @@ -393,14 +393,16 @@ static int it821x_dma_end(ide_drive_t *drive) /** * it821x_set_dma_mode - set host controller for DMA mode + * @hwif: port * @drive: drive - * @speed: DMA mode * * Tune the ITE chipset for the desired DMA mode. */ -static void it821x_set_dma_mode(ide_drive_t *drive, const u8 speed) +static void it821x_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive) { + const u8 speed = drive->dma_mode; + /* * MWDMA tuning is really hard because our MWDMA and PIO * timings are kept in the same place. We can switch in the diff --git a/drivers/ide/jmicron.c b/drivers/ide/jmicron.c index bf2be6431b2..74c2c4a6d90 100644 --- a/drivers/ide/jmicron.c +++ b/drivers/ide/jmicron.c @@ -80,19 +80,19 @@ static u8 jmicron_cable_detect(ide_hwif_t *hwif) return ATA_CBL_PATA80; } -static void jmicron_set_pio_mode(ide_drive_t *drive, const u8 pio) +static void jmicron_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive) { } /** * jmicron_set_dma_mode - set host controller for DMA mode + * @hwif: port * @drive: drive - * @mode: DMA mode * * As the JMicron snoops for timings we don't need to do anything here. */ -static void jmicron_set_dma_mode(ide_drive_t *drive, const u8 mode) +static void jmicron_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive) { } diff --git a/drivers/ide/opti621.c b/drivers/ide/opti621.c index f1d70d6630f..1a53a4c375e 100644 --- a/drivers/ide/opti621.c +++ b/drivers/ide/opti621.c @@ -8,77 +8,6 @@ * Jan Harkes <jaharkes@cwi.nl>, * Mark Lord <mlord@pobox.com> * Some parts of code are from ali14xx.c and from rz1000.c. - * - * OPTi is trademark of OPTi, Octek is trademark of Octek. - * - * I used docs from OPTi databook, from ftp.opti.com, file 9123-0002.ps - * and disassembled/traced setupvic.exe (DOS program). - * It increases kernel code about 2 kB. - * I don't have this card no more, but I hope I can get some in case - * of needed development. - * My card is Octek PIDE 1.01 (on card) or OPTiViC (program). - * It has a place for a secondary connector in circuit, but nothing - * is there. Also BIOS says no address for - * secondary controller (see bellow in ide_init_opti621). - * I've only tested this on my system, which only has one disk. - * It's Western Digital WDAC2850, with PIO mode 3. The PCI bus - * is at 20 MHz (I have DX2/80, I tried PCI at 40, but I got random - * lockups). I tried the OCTEK double speed CD-ROM and - * it does not work! But I can't boot DOS also, so it's probably - * hardware fault. I have connected Conner 80MB, the Seagate 850MB (no - * problems) and Seagate 1GB (as slave, WD as master). My experiences - * with the third, 1GB drive: I got 3MB/s (hdparm), but sometimes - * it slows to about 100kB/s! I don't know why and I have - * not this drive now, so I can't try it again. - * I write this driver because I lost the paper ("manual") with - * settings of jumpers on the card and I have to boot Linux with - * Loadlin except LILO, cause I have to run the setupvic.exe program - * already or I get disk errors (my test: rpm -Vf - * /usr/X11R6/bin/XF86_SVGA - or any big file). - * Some numbers from hdparm -t /dev/hda: - * Timing buffer-cache reads: 32 MB in 3.02 seconds =10.60 MB/sec - * Timing buffered disk reads: 16 MB in 5.52 seconds = 2.90 MB/sec - * I have 4 Megs/s before, but I don't know why (maybe changes - * in hdparm test). - * After release of 0.1, I got some successful reports, so it might work. - * - * The main problem with OPTi is that some timings for master - * and slave must be the same. For example, if you have master - * PIO 3 and slave PIO 0, driver have to set some timings of - * master for PIO 0. Second problem is that opti621_set_pio_mode - * got only one drive to set, but have to set both drives. - * This is solved in compute_pios. If you don't set - * the second drive, compute_pios use ide_get_best_pio_mode - * for autoselect mode (you can change it to PIO 0, if you want). - * If you then set the second drive to another PIO, the old value - * (automatically selected) will be overrided by yours. - * There is a 25/33MHz switch in configuration - * register, but driver is written for use at any frequency. - * - * Version 0.1, Nov 8, 1996 - * by Jaromir Koutek, for 2.1.8. - * Initial version of driver. - * - * Version 0.2 - * Number 0.2 skipped. - * - * Version 0.3, Nov 29, 1997 - * by Mark Lord (probably), for 2.1.68 - * Updates for use with new IDE block driver. - * - * Version 0.4, Dec 14, 1997 - * by Jan Harkes - * Fixed some errors and cleaned the code. - * - * Version 0.5, Jan 2, 1998 - * by Jaromir Koutek - * Updates for use with (again) new IDE block driver. - * Update of documentation. - * - * Version 0.6, Jan 2, 1999 - * by Jaromir Koutek - * Reversed to version 0.3 of the driver, because - * 0.5 doesn't work. */ #include <linux/types.h> @@ -133,12 +62,12 @@ static u8 read_reg(int reg) return ret; } -static void opti621_set_pio_mode(ide_drive_t *drive, const u8 pio) +static void opti621_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive) { - ide_hwif_t *hwif = drive->hwif; ide_drive_t *pair = ide_get_pair_dev(drive); unsigned long flags; - unsigned long mode = XFER_PIO_0 + pio, pair_mode; + unsigned long mode = drive->pio_mode, pair_mode; + const u8 pio = mode - XFER_PIO_0; u8 tim, misc, addr_pio = pio, clk; /* DRDY is default 2 (by OPTi Databook) */ diff --git a/drivers/ide/palm_bk3710.c b/drivers/ide/palm_bk3710.c index f8eddf05ecb..9e8f4e1b0cc 100644 --- a/drivers/ide/palm_bk3710.c +++ b/drivers/ide/palm_bk3710.c @@ -166,7 +166,7 @@ static void palm_bk3710_setpiomode(void __iomem *base, ide_drive_t *mate, writel(val32, base + BK3710_DATRCVR); if (mate) { - u8 mode2 = ide_get_best_pio_mode(mate, 255, 4); + u8 mode2 = mate->pio_mode - XFER_PIO_0; if (mode2 < mode) mode = mode2; @@ -188,10 +188,11 @@ static void palm_bk3710_setpiomode(void __iomem *base, ide_drive_t *mate, writel(val32, base + BK3710_REGRCVR); } -static void palm_bk3710_set_dma_mode(ide_drive_t *drive, u8 xferspeed) +static void palm_bk3710_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive) { int is_slave = drive->dn & 1; - void __iomem *base = (void *)drive->hwif->dma_base; + void __iomem *base = (void *)hwif->dma_base; + const u8 xferspeed = drive->dma_mode; if (xferspeed >= XFER_UDMA_0) { palm_bk3710_setudmamode(base, is_slave, @@ -203,12 +204,13 @@ static void palm_bk3710_set_dma_mode(ide_drive_t *drive, u8 xferspeed) } } -static void palm_bk3710_set_pio_mode(ide_drive_t *drive, u8 pio) +static void palm_bk3710_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive) { unsigned int cycle_time; int is_slave = drive->dn & 1; ide_drive_t *mate; - void __iomem *base = (void *)drive->hwif->dma_base; + void __iomem *base = (void *)hwif->dma_base; + const u8 pio = drive->pio_mode - XFER_PIO_0; /* * Obtain the drive PIO data for tuning the Palm Chip registers diff --git a/drivers/ide/pdc202xx_new.c b/drivers/ide/pdc202xx_new.c index 65ba8239e7b..9546fe2a93f 100644 --- a/drivers/ide/pdc202xx_new.c +++ b/drivers/ide/pdc202xx_new.c @@ -129,11 +129,11 @@ static struct udma_timing { { 0x1a, 0x01, 0xcb }, /* UDMA mode 6 */ }; -static void pdcnew_set_dma_mode(ide_drive_t *drive, const u8 speed) +static void pdcnew_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive) { - ide_hwif_t *hwif = drive->hwif; struct pci_dev *dev = to_pci_dev(hwif->dev); u8 adj = (drive->dn & 1) ? 0x08 : 0x00; + const u8 speed = drive->dma_mode; /* * IDE core issues SETFEATURES_XFER to the drive first (thanks to @@ -167,11 +167,11 @@ static void pdcnew_set_dma_mode(ide_drive_t *drive, const u8 speed) } } -static void pdcnew_set_pio_mode(ide_drive_t *drive, const u8 pio) +static void pdcnew_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive) { - ide_hwif_t *hwif = drive->hwif; struct pci_dev *dev = to_pci_dev(hwif->dev); u8 adj = (drive->dn & 1) ? 0x08 : 0x00; + const u8 pio = drive->pio_mode - XFER_PIO_0; if (max_dma_rate(dev) == 4) { set_indexed_reg(hwif, 0x0c + adj, pio_timings[pio].reg0c); diff --git a/drivers/ide/pdc202xx_old.c b/drivers/ide/pdc202xx_old.c index 35161dd840a..c5f3841af36 100644 --- a/drivers/ide/pdc202xx_old.c +++ b/drivers/ide/pdc202xx_old.c @@ -1,7 +1,7 @@ /* * Copyright (C) 1998-2002 Andre Hedrick <andre@linux-ide.org> * Copyright (C) 2006-2007, 2009 MontaVista Software, Inc. - * Copyright (C) 2007 Bartlomiej Zolnierkiewicz + * Copyright (C) 2007-2010 Bartlomiej Zolnierkiewicz * * Portions Copyright (C) 1999 Promise Technology, Inc. * Author: Frank Tiernan (frankt@promise.com) @@ -21,23 +21,15 @@ #define DRV_NAME "pdc202xx_old" -static void pdc_old_disable_66MHz_clock(ide_hwif_t *); - -static void pdc202xx_set_mode(ide_drive_t *drive, const u8 speed) +static void pdc202xx_set_mode(ide_hwif_t *hwif, ide_drive_t *drive) { - ide_hwif_t *hwif = drive->hwif; struct pci_dev *dev = to_pci_dev(hwif->dev); u8 drive_pci = 0x60 + (drive->dn << 2); + const u8 speed = drive->dma_mode; u8 AP = 0, BP = 0, CP = 0; u8 TA = 0, TB = 0, TC = 0; - /* - * TODO: do this once per channel - */ - if (dev->device != PCI_DEVICE_ID_PROMISE_20246) - pdc_old_disable_66MHz_clock(hwif); - pci_read_config_byte(dev, drive_pci, &AP); pci_read_config_byte(dev, drive_pci + 1, &BP); pci_read_config_byte(dev, drive_pci + 2, &CP); @@ -84,9 +76,10 @@ static void pdc202xx_set_mode(ide_drive_t *drive, const u8 speed) } } -static void pdc202xx_set_pio_mode(ide_drive_t *drive, const u8 pio) +static void pdc202xx_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive) { - pdc202xx_set_mode(drive, XFER_PIO_0 + pio); + drive->dma_mode = drive->pio_mode; + pdc202xx_set_mode(hwif, drive); } static int pdc202xx_test_irq(ide_hwif_t *hwif) @@ -100,13 +93,13 @@ static int pdc202xx_test_irq(ide_hwif_t *hwif) * bit 7: error, bit 6: interrupting, * bit 5: FIFO full, bit 4: FIFO empty */ - return ((sc1d & 0x50) == 0x40) ? 1 : 0; + return ((sc1d & 0x50) == 0x50) ? 1 : 0; } else { /* * bit 3: error, bit 2: interrupting, * bit 1: FIFO full, bit 0: FIFO empty */ - return ((sc1d & 0x05) == 0x04) ? 1 : 0; + return ((sc1d & 0x05) == 0x05) ? 1 : 0; } } @@ -145,6 +138,11 @@ static void pdc_old_disable_66MHz_clock(ide_hwif_t *hwif) outb(clock & ~(hwif->channel ? 0x08 : 0x02), clock_reg); } +static void pdc2026x_init_hwif(ide_hwif_t *hwif) +{ + pdc_old_disable_66MHz_clock(hwif); +} + static void pdc202xx_dma_start(ide_drive_t *drive) { if (drive->current_speed > XFER_UDMA_2) @@ -261,6 +259,7 @@ static const struct ide_dma_ops pdc2026x_dma_ops = { { \ .name = DRV_NAME, \ .init_chipset = init_chipset_pdc202xx, \ + .init_hwif = pdc2026x_init_hwif, \ .port_ops = &pdc2026x_port_ops, \ .dma_ops = &pdc2026x_dma_ops, \ .host_flags = IDE_HFLAGS_PDC202XX, \ @@ -356,6 +355,6 @@ static void __exit pdc202xx_ide_exit(void) module_init(pdc202xx_ide_init); module_exit(pdc202xx_ide_exit); -MODULE_AUTHOR("Andre Hedrick, Frank Tiernan"); +MODULE_AUTHOR("Andre Hedrick, Frank Tiernan, Bartlomiej Zolnierkiewicz"); MODULE_DESCRIPTION("PCI driver module for older Promise IDE"); MODULE_LICENSE("GPL"); diff --git a/drivers/ide/piix.c b/drivers/ide/piix.c index bf14f39bd3a..1bdca49e5a0 100644 --- a/drivers/ide/piix.c +++ b/drivers/ide/piix.c @@ -59,15 +59,14 @@ static int no_piix_dma; /** * piix_set_pio_mode - set host controller for PIO mode + * @port: port * @drive: drive - * @pio: PIO mode number * * Set the interface PIO mode based upon the settings done by AMI BIOS. */ -static void piix_set_pio_mode(ide_drive_t *drive, const u8 pio) +static void piix_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive) { - ide_hwif_t *hwif = drive->hwif; struct pci_dev *dev = to_pci_dev(hwif->dev); int is_slave = drive->dn & 1; int master_port = hwif->channel ? 0x42 : 0x40; @@ -77,6 +76,7 @@ static void piix_set_pio_mode(ide_drive_t *drive, const u8 pio) u8 slave_data; static DEFINE_SPINLOCK(tune_lock); int control = 0; + const u8 pio = drive->pio_mode - XFER_PIO_0; /* ISP RTC */ static const u8 timings[][2]= { @@ -127,16 +127,15 @@ static void piix_set_pio_mode(ide_drive_t *drive, const u8 pio) /** * piix_set_dma_mode - set host controller for DMA mode + * @hwif: port * @drive: drive - * @speed: DMA mode * * Set a PIIX host controller to the desired DMA mode. This involves * programming the right timing data into the PCI configuration space. */ -static void piix_set_dma_mode(ide_drive_t *drive, const u8 speed) +static void piix_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive) { - ide_hwif_t *hwif = drive->hwif; struct pci_dev *dev = to_pci_dev(hwif->dev); u8 maslave = hwif->channel ? 0x42 : 0x40; int a_speed = 3 << (drive->dn * 4); @@ -147,6 +146,7 @@ static void piix_set_dma_mode(ide_drive_t *drive, const u8 speed) int sitre; u16 reg4042, reg4a; u8 reg48, reg54, reg55; + const u8 speed = drive->dma_mode; pci_read_config_word(dev, maslave, ®4042); sitre = (reg4042 & 0x4000) ? 1 : 0; @@ -176,7 +176,6 @@ static void piix_set_dma_mode(ide_drive_t *drive, const u8 speed) pci_write_config_byte(dev, 0x54, reg54 & ~v_flag); } else { const u8 mwdma_to_pio[] = { 0, 3, 4 }; - u8 pio; if (reg48 & u_flag) pci_write_config_byte(dev, 0x48, reg48 & ~u_flag); @@ -188,11 +187,12 @@ static void piix_set_dma_mode(ide_drive_t *drive, const u8 speed) pci_write_config_byte(dev, 0x55, (u8) reg55 & ~w_flag); if (speed >= XFER_MW_DMA_0) - pio = mwdma_to_pio[speed - XFER_MW_DMA_0]; + drive->pio_mode = + mwdma_to_pio[speed - XFER_MW_DMA_0] + XFER_PIO_0; else - pio = 2; /* only SWDMA2 is allowed */ + drive->pio_mode = XFER_PIO_2; /* for SWDMA2 */ - piix_set_pio_mode(drive, pio); + piix_set_pio_mode(hwif, drive); } } diff --git a/drivers/ide/pmac.c b/drivers/ide/pmac.c index 7a4e788cab2..850ee452e9b 100644 --- a/drivers/ide/pmac.c +++ b/drivers/ide/pmac.c @@ -496,12 +496,11 @@ static void pmac_write_devctl(ide_hwif_t *hwif, u8 ctl) /* * Old tuning functions (called on hdparm -p), sets up drive PIO timings */ -static void -pmac_ide_set_pio_mode(ide_drive_t *drive, const u8 pio) +static void pmac_ide_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive) { - ide_hwif_t *hwif = drive->hwif; pmac_ide_hwif_t *pmif = (pmac_ide_hwif_t *)dev_get_drvdata(hwif->gendev.parent); + const u8 pio = drive->pio_mode - XFER_PIO_0; struct ide_timing *tim = ide_timing_find_mode(XFER_PIO_0 + pio); u32 *timings, t; unsigned accessTicks, recTicks; @@ -778,14 +777,14 @@ set_timings_mdma(ide_drive_t *drive, int intf_type, u32 *timings, u32 *timings2, #endif } -static void pmac_ide_set_dma_mode(ide_drive_t *drive, const u8 speed) +static void pmac_ide_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive) { - ide_hwif_t *hwif = drive->hwif; pmac_ide_hwif_t *pmif = (pmac_ide_hwif_t *)dev_get_drvdata(hwif->gendev.parent); int ret = 0; u32 *timings, *timings2, tl[2]; u8 unit = drive->dn & 1; + const u8 speed = drive->dma_mode; timings = &pmif->timings[unit]; timings2 = &pmif->timings[unit+2]; @@ -1651,8 +1650,8 @@ pmac_ide_dma_test_irq (ide_drive_t *drive) if ((status & FLUSH) == 0) break; if (++timeout > 100) { - printk(KERN_WARNING "ide%d, ide_dma_test_irq \ - timeout flushing channel\n", hwif->index); + printk(KERN_WARNING "ide%d, ide_dma_test_irq timeout flushing channel\n", + hwif->index); break; } } diff --git a/drivers/ide/qd65xx.c b/drivers/ide/qd65xx.c index 74696edc8d1..3f0244fd8e6 100644 --- a/drivers/ide/qd65xx.c +++ b/drivers/ide/qd65xx.c @@ -189,15 +189,13 @@ static void qd_set_timing (ide_drive_t *drive, u8 timing) printk(KERN_DEBUG "%s: %#x\n", drive->name, timing); } -static void qd6500_set_pio_mode(ide_drive_t *drive, const u8 pio) +static void qd6500_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive) { u16 *id = drive->id; int active_time = 175; int recovery_time = 415; /* worst case values from the dos driver */ - /* - * FIXME: use "pio" value - */ + /* FIXME: use drive->pio_mode value */ if (!qd_find_disk_type(drive, &active_time, &recovery_time) && (id[ATA_ID_OLD_PIO_MODES] & 0xff) && (id[ATA_ID_FIELD_VALID] & 2) && id[ATA_ID_EIDE_PIO] >= 240) { @@ -211,9 +209,9 @@ static void qd6500_set_pio_mode(ide_drive_t *drive, const u8 pio) active_time, recovery_time)); } -static void qd6580_set_pio_mode(ide_drive_t *drive, const u8 pio) +static void qd6580_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive) { - ide_hwif_t *hwif = drive->hwif; + const u8 pio = drive->pio_mode - XFER_PIO_0; struct ide_timing *t = ide_timing_find_mode(XFER_PIO_0 + pio); unsigned int cycle_time; int active_time = 175; diff --git a/drivers/ide/sc1200.c b/drivers/ide/sc1200.c index d467478d68d..134f1fd1386 100644 --- a/drivers/ide/sc1200.c +++ b/drivers/ide/sc1200.c @@ -122,13 +122,13 @@ out: return mask; } -static void sc1200_set_dma_mode(ide_drive_t *drive, const u8 mode) +static void sc1200_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive) { - ide_hwif_t *hwif = drive->hwif; struct pci_dev *dev = to_pci_dev(hwif->dev); unsigned int reg, timings; unsigned short pci_clock; unsigned int basereg = hwif->channel ? 0x50 : 0x40; + const u8 mode = drive->dma_mode; static const u32 udma_timing[3][3] = { { 0x00921250, 0x00911140, 0x00911030 }, @@ -193,10 +193,10 @@ static int sc1200_dma_end(ide_drive_t *drive) * will have valid default PIO timings set up before we get here. */ -static void sc1200_set_pio_mode(ide_drive_t *drive, const u8 pio) +static void sc1200_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive) { - ide_hwif_t *hwif = drive->hwif; int mode = -1; + const u8 pio = drive->pio_mode - XFER_PIO_0; /* * bad abuse of ->set_pio_mode interface diff --git a/drivers/ide/scc_pata.c b/drivers/ide/scc_pata.c index 1104bb301eb..b7f5b0c4310 100644 --- a/drivers/ide/scc_pata.c +++ b/drivers/ide/scc_pata.c @@ -199,16 +199,15 @@ scc_ide_outsl(unsigned long port, void *addr, u32 count) /** * scc_set_pio_mode - set host controller for PIO mode + * @hwif: port * @drive: drive - * @pio: PIO mode number * * Load the timing settings for this device mode into the * controller. */ -static void scc_set_pio_mode(ide_drive_t *drive, const u8 pio) +static void scc_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive) { - ide_hwif_t *hwif = drive->hwif; struct scc_ports *ports = ide_get_hwifdata(hwif); unsigned long ctl_base = ports->ctl; unsigned long cckctrl_port = ctl_base + 0xff0; @@ -216,6 +215,7 @@ static void scc_set_pio_mode(ide_drive_t *drive, const u8 pio) unsigned long pioct_port = ctl_base + 0x004; unsigned long reg; int offset; + const u8 pio = drive->pio_mode - XFER_PIO_0; reg = in_be32((void __iomem *)cckctrl_port); if (reg & CCKCTRL_ATACLKOEN) { @@ -231,16 +231,15 @@ static void scc_set_pio_mode(ide_drive_t *drive, const u8 pio) /** * scc_set_dma_mode - set host controller for DMA mode + * @hwif: port * @drive: drive - * @speed: DMA mode * * Load the timing settings for this device mode into the * controller. */ -static void scc_set_dma_mode(ide_drive_t *drive, const u8 speed) +static void scc_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive) { - ide_hwif_t *hwif = drive->hwif; struct scc_ports *ports = ide_get_hwifdata(hwif); unsigned long ctl_base = ports->ctl; unsigned long cckctrl_port = ctl_base + 0xff0; @@ -254,6 +253,7 @@ static void scc_set_dma_mode(ide_drive_t *drive, const u8 speed) int offset, idx; unsigned long reg; unsigned long jcactsel; + const u8 speed = drive->dma_mode; reg = in_be32((void __iomem *)cckctrl_port); if (reg & CCKCTRL_ATACLKOEN) { @@ -872,20 +872,18 @@ static struct pci_driver scc_pci_driver = { .remove = __devexit_p(scc_remove), }; -static int scc_ide_init(void) +static int __init scc_ide_init(void) { return ide_pci_register_driver(&scc_pci_driver); } -module_init(scc_ide_init); -/* -- No exit code? -static void scc_ide_exit(void) +static void __exit scc_ide_exit(void) { - ide_pci_unregister_driver(&scc_pci_driver); + pci_unregister_driver(&scc_pci_driver); } -module_exit(scc_ide_exit); - */ +module_init(scc_ide_init); +module_exit(scc_ide_exit); MODULE_DESCRIPTION("PCI driver module for Toshiba SCC IDE"); MODULE_LICENSE("GPL"); diff --git a/drivers/ide/serverworks.c b/drivers/ide/serverworks.c index b6554ef9271..35fb8dabb55 100644 --- a/drivers/ide/serverworks.c +++ b/drivers/ide/serverworks.c @@ -2,7 +2,7 @@ * Copyright (C) 1998-2000 Michel Aubry * Copyright (C) 1998-2000 Andrzej Krzysztofowicz * Copyright (C) 1998-2000 Andre Hedrick <andre@linux-ide.org> - * Copyright (C) 2007 Bartlomiej Zolnierkiewicz + * Copyright (C) 2007-2010 Bartlomiej Zolnierkiewicz * Portions copyright (c) 2001 Sun Microsystems * * @@ -52,8 +52,6 @@ static const char *svwks_bad_ata100[] = { NULL }; -static struct pci_dev *isa_dev; - static int check_in_drive_lists (ide_drive_t *drive, const char **list) { char *m = (char *)&drive->id[ATA_ID_PROD]; @@ -67,26 +65,14 @@ static int check_in_drive_lists (ide_drive_t *drive, const char **list) static u8 svwks_udma_filter(ide_drive_t *drive) { struct pci_dev *dev = to_pci_dev(drive->hwif->dev); - u8 mask = 0; - if (dev->device == PCI_DEVICE_ID_SERVERWORKS_HT1000IDE) + if (dev->device == PCI_DEVICE_ID_SERVERWORKS_HT1000IDE) { return 0x1f; - if (dev->device == PCI_DEVICE_ID_SERVERWORKS_OSB4IDE) { - u32 reg = 0; - if (isa_dev) - pci_read_config_dword(isa_dev, 0x64, ®); - - /* - * Don't enable UDMA on disk devices for the moment - */ - if(drive->media == ide_disk) - return 0; - /* Check the OSB4 DMA33 enable bit */ - return ((reg & 0x00004000) == 0x00004000) ? 0x07 : 0; } else if (dev->revision < SVWKS_CSB5_REVISION_NEW) { return 0x07; - } else if (dev->revision >= SVWKS_CSB5_REVISION_NEW) { - u8 btr = 0, mode; + } else { + u8 btr = 0, mode, mask; + pci_read_config_byte(dev, 0x5A, &btr); mode = btr & 0x3; @@ -101,13 +87,9 @@ static u8 svwks_udma_filter(ide_drive_t *drive) case 1: mask = 0x07; break; default: mask = 0x00; break; } - } - if (((dev->device == PCI_DEVICE_ID_SERVERWORKS_CSB6IDE) || - (dev->device == PCI_DEVICE_ID_SERVERWORKS_CSB6IDE2)) && - (!(PCI_FUNC(dev->devfn) & 1))) - mask = 0x1f; - return mask; + return mask; + } } static u8 svwks_csb_check (struct pci_dev *dev) @@ -124,12 +106,13 @@ static u8 svwks_csb_check (struct pci_dev *dev) return 0; } -static void svwks_set_pio_mode(ide_drive_t *drive, const u8 pio) +static void svwks_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive) { static const u8 pio_modes[] = { 0x5d, 0x47, 0x34, 0x22, 0x20 }; static const u8 drive_pci[] = { 0x41, 0x40, 0x43, 0x42 }; - struct pci_dev *dev = to_pci_dev(drive->hwif->dev); + struct pci_dev *dev = to_pci_dev(hwif->dev); + const u8 pio = drive->pio_mode - XFER_PIO_0; pci_write_config_byte(dev, drive_pci[drive->dn], pio_modes[pio]); @@ -145,14 +128,14 @@ static void svwks_set_pio_mode(ide_drive_t *drive, const u8 pio) } } -static void svwks_set_dma_mode(ide_drive_t *drive, const u8 speed) +static void svwks_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive) { static const u8 udma_modes[] = { 0x00, 0x01, 0x02, 0x03, 0x04, 0x05 }; static const u8 dma_modes[] = { 0x77, 0x21, 0x20 }; static const u8 drive_pci2[] = { 0x45, 0x44, 0x47, 0x46 }; - ide_hwif_t *hwif = drive->hwif; struct pci_dev *dev = to_pci_dev(hwif->dev); + const u8 speed = drive->dma_mode; u8 unit = drive->dn & 1; u8 ultra_enable = 0, ultra_timing = 0, dma_timing = 0; @@ -185,8 +168,9 @@ static int init_chipset_svwks(struct pci_dev *dev) /* OSB4 : South Bridge and IDE */ if (dev->device == PCI_DEVICE_ID_SERVERWORKS_OSB4IDE) { - isa_dev = pci_get_device(PCI_VENDOR_ID_SERVERWORKS, - PCI_DEVICE_ID_SERVERWORKS_OSB4, NULL); + struct pci_dev *isa_dev = + pci_get_device(PCI_VENDOR_ID_SERVERWORKS, + PCI_DEVICE_ID_SERVERWORKS_OSB4, NULL); if (isa_dev) { pci_read_config_dword(isa_dev, 0x64, ®); reg &= ~0x00002000; /* disable 600ns interrupt mask */ @@ -195,6 +179,7 @@ static int init_chipset_svwks(struct pci_dev *dev) "enabled.\n", pci_name(dev)); reg |= 0x00004000; /* enable UDMA/33 support */ pci_write_config_dword(isa_dev, 0x64, reg); + pci_dev_put(isa_dev); } } @@ -343,7 +328,6 @@ static u8 svwks_cable_detect(ide_hwif_t *hwif) static const struct ide_port_ops osb4_port_ops = { .set_pio_mode = svwks_set_pio_mode, .set_dma_mode = svwks_set_dma_mode, - .udma_filter = svwks_udma_filter, }; static const struct ide_port_ops svwks_port_ops = { @@ -460,6 +444,6 @@ static void __exit svwks_ide_exit(void) module_init(svwks_ide_init); module_exit(svwks_ide_exit); -MODULE_AUTHOR("Michael Aubry. Andrzej Krzysztofowicz, Andre Hedrick"); +MODULE_AUTHOR("Michael Aubry. Andrzej Krzysztofowicz, Andre Hedrick, Bartlomiej Zolnierkiewicz"); MODULE_DESCRIPTION("PCI driver module for Serverworks OSB4/CSB5/CSB6 IDE"); MODULE_LICENSE("GPL"); diff --git a/drivers/ide/sgiioc4.c b/drivers/ide/sgiioc4.c index b7d61dc6409..e3ea591f66d 100644 --- a/drivers/ide/sgiioc4.c +++ b/drivers/ide/sgiioc4.c @@ -255,7 +255,7 @@ static int sgiioc4_dma_end(ide_drive_t *drive) return dma_stat; } -static void sgiioc4_set_dma_mode(ide_drive_t *drive, const u8 speed) +static void sgiioc4_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive) { } diff --git a/drivers/ide/siimage.c b/drivers/ide/siimage.c index d95df528562..ddeda444a27 100644 --- a/drivers/ide/siimage.c +++ b/drivers/ide/siimage.c @@ -229,19 +229,18 @@ static u8 sil_sata_udma_filter(ide_drive_t *drive) /** * sil_set_pio_mode - set host controller for PIO mode + * @hwif: port * @drive: drive - * @pio: PIO mode number * * Load the timing settings for this device mode into the * controller. */ -static void sil_set_pio_mode(ide_drive_t *drive, u8 pio) +static void sil_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive) { static const u16 tf_speed[] = { 0x328a, 0x2283, 0x1281, 0x10c3, 0x10c1 }; static const u16 data_speed[] = { 0x328a, 0x2283, 0x1104, 0x10c3, 0x10c1 }; - ide_hwif_t *hwif = drive->hwif; struct pci_dev *dev = to_pci_dev(hwif->dev); ide_drive_t *pair = ide_get_pair_dev(drive); u32 speedt = 0; @@ -249,6 +248,7 @@ static void sil_set_pio_mode(ide_drive_t *drive, u8 pio) unsigned long addr = siimage_seldev(drive, 0x04); unsigned long tfaddr = siimage_selreg(hwif, 0x02); unsigned long base = (unsigned long)hwif->hwif_data; + const u8 pio = drive->pio_mode - XFER_PIO_0; u8 tf_pio = pio; u8 mmio = (hwif->host_flags & IDE_HFLAG_MMIO) ? 1 : 0; u8 addr_mask = hwif->channel ? (mmio ? 0xF4 : 0x84) @@ -258,7 +258,7 @@ static void sil_set_pio_mode(ide_drive_t *drive, u8 pio) /* trim *taskfile* PIO to the slowest of the master/slave */ if (pair) { - u8 pair_pio = ide_get_best_pio_mode(pair, 255, 4); + u8 pair_pio = pair->pio_mode - XFER_PIO_0; if (pair_pio < tf_pio) tf_pio = pair_pio; @@ -289,19 +289,18 @@ static void sil_set_pio_mode(ide_drive_t *drive, u8 pio) /** * sil_set_dma_mode - set host controller for DMA mode + * @hwif: port * @drive: drive - * @speed: DMA mode * * Tune the SiI chipset for the desired DMA mode. */ -static void sil_set_dma_mode(ide_drive_t *drive, const u8 speed) +static void sil_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive) { static const u8 ultra6[] = { 0x0F, 0x0B, 0x07, 0x05, 0x03, 0x02, 0x01 }; static const u8 ultra5[] = { 0x0C, 0x07, 0x05, 0x04, 0x02, 0x01 }; static const u16 dma[] = { 0x2208, 0x10C2, 0x10C1 }; - ide_hwif_t *hwif = drive->hwif; struct pci_dev *dev = to_pci_dev(hwif->dev); unsigned long base = (unsigned long)hwif->hwif_data; u16 ultra = 0, multi = 0; @@ -311,6 +310,7 @@ static void sil_set_dma_mode(ide_drive_t *drive, const u8 speed) : (mmio ? 0xB4 : 0x80); unsigned long ma = siimage_seldev(drive, 0x08); unsigned long ua = siimage_seldev(drive, 0x0C); + const u8 speed = drive->dma_mode; scsc = sil_ioread8 (dev, base + (mmio ? 0x4A : 0x8A)); mode = sil_ioread8 (dev, base + addr_mask); diff --git a/drivers/ide/sis5513.c b/drivers/ide/sis5513.c index 468706082fb..db7f4e761db 100644 --- a/drivers/ide/sis5513.c +++ b/drivers/ide/sis5513.c @@ -290,10 +290,10 @@ static void config_drive_art_rwp(ide_drive_t *drive) pci_write_config_byte(dev, 0x4b, rw_prefetch); } -static void sis_set_pio_mode(ide_drive_t *drive, const u8 pio) +static void sis_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive) { config_drive_art_rwp(drive); - sis_program_timings(drive, XFER_PIO_0 + pio); + sis_program_timings(drive, drive->pio_mode); } static void sis_ata133_program_udma_timings(ide_drive_t *drive, const u8 mode) @@ -340,8 +340,10 @@ static void sis_program_udma_timings(ide_drive_t *drive, const u8 mode) sis_ata33_program_udma_timings(drive, mode); } -static void sis_set_dma_mode(ide_drive_t *drive, const u8 speed) +static void sis_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive) { + const u8 speed = drive->dma_mode; + if (speed >= XFER_UDMA_0) sis_program_udma_timings(drive, speed); else diff --git a/drivers/ide/sl82c105.c b/drivers/ide/sl82c105.c index 3c2bbf0057e..f21dc2ad768 100644 --- a/drivers/ide/sl82c105.c +++ b/drivers/ide/sl82c105.c @@ -63,12 +63,13 @@ static unsigned int get_pio_timings(ide_drive_t *drive, u8 pio) /* * Configure the chipset for PIO mode. */ -static void sl82c105_set_pio_mode(ide_drive_t *drive, const u8 pio) +static void sl82c105_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive) { - struct pci_dev *dev = to_pci_dev(drive->hwif->dev); + struct pci_dev *dev = to_pci_dev(hwif->dev); unsigned long timings = (unsigned long)ide_get_drivedata(drive); int reg = 0x44 + drive->dn * 4; u16 drv_ctrl; + const u8 pio = drive->pio_mode - XFER_PIO_0; drv_ctrl = get_pio_timings(drive, pio); @@ -91,11 +92,12 @@ static void sl82c105_set_pio_mode(ide_drive_t *drive, const u8 pio) /* * Configure the chipset for DMA mode. */ -static void sl82c105_set_dma_mode(ide_drive_t *drive, const u8 speed) +static void sl82c105_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive) { static u16 mwdma_timings[] = {0x0707, 0x0201, 0x0200}; unsigned long timings = (unsigned long)ide_get_drivedata(drive); u16 drv_ctrl; + const u8 speed = drive->dma_mode; drv_ctrl = mwdma_timings[speed - XFER_MW_DMA_0]; diff --git a/drivers/ide/slc90e66.c b/drivers/ide/slc90e66.c index 1ccfb40e721..864ffe0e26d 100644 --- a/drivers/ide/slc90e66.c +++ b/drivers/ide/slc90e66.c @@ -18,9 +18,8 @@ static DEFINE_SPINLOCK(slc90e66_lock); -static void slc90e66_set_pio_mode(ide_drive_t *drive, const u8 pio) +static void slc90e66_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive) { - ide_hwif_t *hwif = drive->hwif; struct pci_dev *dev = to_pci_dev(hwif->dev); int is_slave = drive->dn & 1; int master_port = hwif->channel ? 0x42 : 0x40; @@ -29,6 +28,8 @@ static void slc90e66_set_pio_mode(ide_drive_t *drive, const u8 pio) u16 master_data; u8 slave_data; int control = 0; + const u8 pio = drive->pio_mode - XFER_PIO_0; + /* ISP RTC */ static const u8 timings[][2] = { { 0, 0 }, @@ -71,14 +72,14 @@ static void slc90e66_set_pio_mode(ide_drive_t *drive, const u8 pio) spin_unlock_irqrestore(&slc90e66_lock, flags); } -static void slc90e66_set_dma_mode(ide_drive_t *drive, const u8 speed) +static void slc90e66_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive) { - ide_hwif_t *hwif = drive->hwif; struct pci_dev *dev = to_pci_dev(hwif->dev); u8 maslave = hwif->channel ? 0x42 : 0x40; int sitre = 0, a_speed = 7 << (drive->dn * 4); int u_speed = 0, u_flag = 1 << drive->dn; u16 reg4042, reg44, reg48, reg4a; + const u8 speed = drive->dma_mode; pci_read_config_word(dev, maslave, ®4042); sitre = (reg4042 & 0x4000) ? 1 : 0; @@ -98,7 +99,6 @@ static void slc90e66_set_dma_mode(ide_drive_t *drive, const u8 speed) } } else { const u8 mwdma_to_pio[] = { 0, 3, 4 }; - u8 pio; if (reg48 & u_flag) pci_write_config_word(dev, 0x48, reg48 & ~u_flag); @@ -106,11 +106,12 @@ static void slc90e66_set_dma_mode(ide_drive_t *drive, const u8 speed) pci_write_config_word(dev, 0x4a, reg4a & ~a_speed); if (speed >= XFER_MW_DMA_0) - pio = mwdma_to_pio[speed - XFER_MW_DMA_0]; + drive->pio_mode = + mwdma_to_pio[speed - XFER_MW_DMA_0] + XFER_PIO_0; else - pio = 2; /* only SWDMA2 is allowed */ + drive->pio_mode = XFER_PIO_2; /* for SWDMA2 */ - slc90e66_set_pio_mode(drive, pio); + slc90e66_set_pio_mode(hwif, drive); } } diff --git a/drivers/ide/tc86c001.c b/drivers/ide/tc86c001.c index 05a93d6baec..e444d24934b 100644 --- a/drivers/ide/tc86c001.c +++ b/drivers/ide/tc86c001.c @@ -13,11 +13,11 @@ #define DRV_NAME "tc86c001" -static void tc86c001_set_mode(ide_drive_t *drive, const u8 speed) +static void tc86c001_set_mode(ide_hwif_t *hwif, ide_drive_t *drive) { - ide_hwif_t *hwif = drive->hwif; unsigned long scr_port = hwif->config_data + (drive->dn ? 0x02 : 0x00); u16 mode, scr = inw(scr_port); + const u8 speed = drive->dma_mode; switch (speed) { case XFER_UDMA_4: mode = 0x00c0; break; @@ -41,9 +41,10 @@ static void tc86c001_set_mode(ide_drive_t *drive, const u8 speed) outw(scr, scr_port); } -static void tc86c001_set_pio_mode(ide_drive_t *drive, const u8 pio) +static void tc86c001_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive) { - tc86c001_set_mode(drive, XFER_PIO_0 + pio); + drive->dma_mode = drive->pio_mode; + tc86c001_set_mode(hwif, drive); } /* diff --git a/drivers/ide/triflex.c b/drivers/ide/triflex.c index 8773c3ba746..7953447eae0 100644 --- a/drivers/ide/triflex.c +++ b/drivers/ide/triflex.c @@ -34,9 +34,8 @@ #define DRV_NAME "triflex" -static void triflex_set_mode(ide_drive_t *drive, const u8 speed) +static void triflex_set_mode(ide_hwif_t *hwif, ide_drive_t *drive) { - ide_hwif_t *hwif = drive->hwif; struct pci_dev *dev = to_pci_dev(hwif->dev); u32 triflex_timings = 0; u16 timing = 0; @@ -44,7 +43,7 @@ static void triflex_set_mode(ide_drive_t *drive, const u8 speed) pci_read_config_dword(dev, channel_offset, &triflex_timings); - switch(speed) { + switch (drive->dma_mode) { case XFER_MW_DMA_2: timing = 0x0103; break; @@ -82,9 +81,10 @@ static void triflex_set_mode(ide_drive_t *drive, const u8 speed) pci_write_config_dword(dev, channel_offset, triflex_timings); } -static void triflex_set_pio_mode(ide_drive_t *drive, const u8 pio) +static void triflex_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive) { - triflex_set_mode(drive, XFER_PIO_0 + pio); + drive->dma_mode = drive->pio_mode; + triflex_set_mode(hwif, drive); } static const struct ide_port_ops triflex_port_ops = { diff --git a/drivers/ide/tx4938ide.c b/drivers/ide/tx4938ide.c index fd59c0d235b..1d80f1fdbc9 100644 --- a/drivers/ide/tx4938ide.c +++ b/drivers/ide/tx4938ide.c @@ -56,16 +56,15 @@ static void tx4938ide_tune_ebusc(unsigned int ebus_ch, &tx4938_ebuscptr->cr[ebus_ch]); } -static void tx4938ide_set_pio_mode(ide_drive_t *drive, const u8 pio) +static void tx4938ide_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive) { - ide_hwif_t *hwif = drive->hwif; struct tx4938ide_platform_info *pdata = hwif->dev->platform_data; - u8 safe = pio; + u8 safe = drive->pio_mode - XFER_PIO_0; ide_drive_t *pair; pair = ide_get_pair_dev(drive); if (pair) - safe = min(safe, ide_get_best_pio_mode(pair, 255, 5)); + safe = min(safe, pair->pio_mode - XFER_PIO_0); tx4938ide_tune_ebusc(pdata->ebus_ch, pdata->gbus_clock, safe); } diff --git a/drivers/ide/tx4939ide.c b/drivers/ide/tx4939ide.c index 64b58ecc3f0..3c736775187 100644 --- a/drivers/ide/tx4939ide.c +++ b/drivers/ide/tx4939ide.c @@ -104,17 +104,17 @@ static void tx4939ide_writeb(u8 val, void __iomem *base, u32 reg) #define TX4939IDE_BASE(hwif) ((void __iomem *)(hwif)->extra_base) -static void tx4939ide_set_pio_mode(ide_drive_t *drive, const u8 pio) +static void tx4939ide_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive) { - ide_hwif_t *hwif = drive->hwif; int is_slave = drive->dn; u32 mask, val; + const u8 pio = drive->pio_mode - XFER_PIO_0; u8 safe = pio; ide_drive_t *pair; pair = ide_get_pair_dev(drive); if (pair) - safe = min(safe, ide_get_best_pio_mode(pair, 255, 4)); + safe = min(safe, pair->pio_mode - XFER_PIO_0); /* * Update Command Transfer Mode for master/slave and Data * Transfer Mode for this drive. @@ -125,10 +125,10 @@ static void tx4939ide_set_pio_mode(ide_drive_t *drive, const u8 pio) /* tx4939ide_tf_load_fixup() will set the Sys_Ctl register */ } -static void tx4939ide_set_dma_mode(ide_drive_t *drive, const u8 mode) +static void tx4939ide_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive) { - ide_hwif_t *hwif = drive->hwif; u32 mask, val; + const u8 mode = drive->dma_mode; /* Update Data Transfer Mode for this drive. */ if (mode >= XFER_UDMA_0) diff --git a/drivers/ide/umc8672.c b/drivers/ide/umc8672.c index 60f936e2319..47adcd09cb2 100644 --- a/drivers/ide/umc8672.c +++ b/drivers/ide/umc8672.c @@ -104,10 +104,11 @@ static void umc_set_speeds(u8 speeds[]) speeds[0], speeds[1], speeds[2], speeds[3]); } -static void umc_set_pio_mode(ide_drive_t *drive, const u8 pio) +static void umc_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive) { - ide_hwif_t *hwif = drive->hwif, *mate = hwif->mate; + ide_hwif_t *mate = hwif->mate; unsigned long uninitialized_var(flags); + const u8 pio = drive->pio_mode - XFER_PIO_0; printk("%s: setting umc8672 to PIO mode%d (speed %d)\n", drive->name, pio, pio_to_umc[pio]); diff --git a/drivers/ide/via82cxxx.c b/drivers/ide/via82cxxx.c index 028de26a25f..e65d010b708 100644 --- a/drivers/ide/via82cxxx.c +++ b/drivers/ide/via82cxxx.c @@ -6,7 +6,7 @@ * vt8235, vt8237, vt8237a * * Copyright (c) 2000-2002 Vojtech Pavlik - * Copyright (c) 2007 Bartlomiej Zolnierkiewicz + * Copyright (c) 2007-2010 Bartlomiej Zolnierkiewicz * * Based on the work of: * Michel Aubry @@ -54,6 +54,11 @@ #define VIA_NO_UNMASK 0x08 /* Doesn't work with IRQ unmasking on */ #define VIA_BAD_ID 0x10 /* Has wrong vendor ID (0x1107) */ #define VIA_BAD_AST 0x20 /* Don't touch Address Setup Timing */ +#define VIA_SATA_PATA 0x80 /* SATA/PATA combined configuration */ + +enum { + VIA_IDFLAG_SINGLE = (1 << 1), /* single channel controller */ +}; /* * VIA SouthBridge chips. @@ -67,11 +72,13 @@ static struct via_isa_bridge { u8 udma_mask; u8 flags; } via_isa_bridges[] = { - { "vx855", PCI_DEVICE_ID_VIA_VX855, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST }, - { "vx800", PCI_DEVICE_ID_VIA_VX800, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST }, - { "cx700", PCI_DEVICE_ID_VIA_CX700, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST }, + { "vx855", PCI_DEVICE_ID_VIA_VX855, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST | VIA_SATA_PATA }, + { "vx800", PCI_DEVICE_ID_VIA_VX800, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST | VIA_SATA_PATA }, + { "cx700", PCI_DEVICE_ID_VIA_CX700, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST | VIA_SATA_PATA }, + { "vt8261", PCI_DEVICE_ID_VIA_8261, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST }, { "vt8237s", PCI_DEVICE_ID_VIA_8237S, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST }, { "vt6410", PCI_DEVICE_ID_VIA_6410, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST }, + { "vt6415", PCI_DEVICE_ID_VIA_6410, 0x00, 0xff, ATA_UDMA6, VIA_BAD_AST }, { "vt8251", PCI_DEVICE_ID_VIA_8251, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST }, { "vt8237", PCI_DEVICE_ID_VIA_8237, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST }, { "vt8237a", PCI_DEVICE_ID_VIA_8237A, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST }, @@ -92,6 +99,7 @@ static struct via_isa_bridge { { "vt82c586", PCI_DEVICE_ID_VIA_82C586_0, 0x00, 0x0f, 0x00, VIA_SET_FIFO }, { "vt82c576", PCI_DEVICE_ID_VIA_82C576, 0x00, 0x2f, 0x00, VIA_SET_FIFO | VIA_NO_UNMASK }, { "vt82c576", PCI_DEVICE_ID_VIA_82C576, 0x00, 0x2f, 0x00, VIA_SET_FIFO | VIA_NO_UNMASK | VIA_BAD_ID }, + { "vtxxxx", PCI_DEVICE_ID_VIA_ANON, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST }, { NULL } }; @@ -102,6 +110,7 @@ struct via82cxxx_dev { struct via_isa_bridge *via_config; unsigned int via_80w; + u8 cached_device[2]; }; /** @@ -137,30 +146,45 @@ static void via_set_speed(ide_hwif_t *hwif, u8 dn, struct ide_timing *timing) case ATA_UDMA4: t = timing->udma ? (0xe8 | (clamp_val(timing->udma, 2, 9) - 2)) : 0x0f; break; case ATA_UDMA5: t = timing->udma ? (0xe0 | (clamp_val(timing->udma, 2, 9) - 2)) : 0x07; break; case ATA_UDMA6: t = timing->udma ? (0xe0 | (clamp_val(timing->udma, 2, 9) - 2)) : 0x07; break; - default: return; } - pci_write_config_byte(dev, VIA_UDMA_TIMING + (3 - dn), t); + /* Set UDMA unless device is not UDMA capable */ + if (vdev->via_config->udma_mask) { + u8 udma_etc; + + pci_read_config_byte(dev, VIA_UDMA_TIMING + 3 - dn, &udma_etc); + + /* clear transfer mode bit */ + udma_etc &= ~0x20; + + if (timing->udma) { + /* preserve 80-wire cable detection bit */ + udma_etc &= 0x10; + udma_etc |= t; + } + + pci_write_config_byte(dev, VIA_UDMA_TIMING + 3 - dn, udma_etc); + } } /** * via_set_drive - configure transfer mode + * @hwif: port * @drive: Drive to set up - * @speed: desired speed * * via_set_drive() computes timing values configures the chipset to * a desired transfer mode. It also can be called by upper layers. */ -static void via_set_drive(ide_drive_t *drive, const u8 speed) +static void via_set_drive(ide_hwif_t *hwif, ide_drive_t *drive) { - ide_hwif_t *hwif = drive->hwif; ide_drive_t *peer = ide_get_pair_dev(drive); struct pci_dev *dev = to_pci_dev(hwif->dev); struct ide_host *host = pci_get_drvdata(dev); struct via82cxxx_dev *vdev = host->host_priv; struct ide_timing t, p; unsigned int T, UT; + const u8 speed = drive->dma_mode; T = 1000000000 / via_clock; @@ -175,7 +199,7 @@ static void via_set_drive(ide_drive_t *drive, const u8 speed) ide_timing_compute(drive, speed, &t, T, UT); if (peer) { - ide_timing_compute(peer, peer->current_speed, &p, T, UT); + ide_timing_compute(peer, peer->pio_mode, &p, T, UT); ide_timing_merge(&p, &t, &t, IDE_TIMING_8BIT); } @@ -184,22 +208,24 @@ static void via_set_drive(ide_drive_t *drive, const u8 speed) /** * via_set_pio_mode - set host controller for PIO mode + * @hwif: port * @drive: drive - * @pio: PIO mode number * * A callback from the upper layers for PIO-only tuning. */ -static void via_set_pio_mode(ide_drive_t *drive, const u8 pio) +static void via_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive) { - via_set_drive(drive, XFER_PIO_0 + pio); + drive->dma_mode = drive->pio_mode; + via_set_drive(hwif, drive); } static struct via_isa_bridge *via_config_find(struct pci_dev **isa) { struct via_isa_bridge *via_config; - for (via_config = via_isa_bridges; via_config->id; via_config++) + for (via_config = via_isa_bridges; + via_config->id != PCI_DEVICE_ID_VIA_ANON; via_config++) if ((*isa = pci_get_device(PCI_VENDOR_ID_VIA + !!(via_config->flags & VIA_BAD_ID), via_config->id, NULL))) { @@ -362,6 +388,9 @@ static u8 via82cxxx_cable_detect(ide_hwif_t *hwif) if (via_cable_override(pdev)) return ATA_CBL_PATA40_SHORT; + if ((vdev->via_config->flags & VIA_SATA_PATA) && hwif->channel == 0) + return ATA_CBL_SATA; + if ((vdev->via_80w >> hwif->channel) & 1) return ATA_CBL_PATA80; else @@ -374,10 +403,66 @@ static const struct ide_port_ops via_port_ops = { .cable_detect = via82cxxx_cable_detect, }; +static void via_write_devctl(ide_hwif_t *hwif, u8 ctl) +{ + struct via82cxxx_dev *vdev = hwif->host->host_priv; + + outb(ctl, hwif->io_ports.ctl_addr); + outb(vdev->cached_device[hwif->channel], hwif->io_ports.device_addr); +} + +static void __via_dev_select(ide_drive_t *drive, u8 select) +{ + ide_hwif_t *hwif = drive->hwif; + struct via82cxxx_dev *vdev = hwif->host->host_priv; + + outb(select, hwif->io_ports.device_addr); + vdev->cached_device[hwif->channel] = select; +} + +static void via_dev_select(ide_drive_t *drive) +{ + __via_dev_select(drive, drive->select | ATA_DEVICE_OBS); +} + +static void via_tf_load(ide_drive_t *drive, struct ide_taskfile *tf, u8 valid) +{ + ide_hwif_t *hwif = drive->hwif; + struct ide_io_ports *io_ports = &hwif->io_ports; + + if (valid & IDE_VALID_FEATURE) + outb(tf->feature, io_ports->feature_addr); + if (valid & IDE_VALID_NSECT) + outb(tf->nsect, io_ports->nsect_addr); + if (valid & IDE_VALID_LBAL) + outb(tf->lbal, io_ports->lbal_addr); + if (valid & IDE_VALID_LBAM) + outb(tf->lbam, io_ports->lbam_addr); + if (valid & IDE_VALID_LBAH) + outb(tf->lbah, io_ports->lbah_addr); + if (valid & IDE_VALID_DEVICE) + __via_dev_select(drive, tf->device); +} + +const struct ide_tp_ops via_tp_ops = { + .exec_command = ide_exec_command, + .read_status = ide_read_status, + .read_altstatus = ide_read_altstatus, + .write_devctl = via_write_devctl, + + .dev_select = via_dev_select, + .tf_load = via_tf_load, + .tf_read = ide_tf_read, + + .input_data = ide_input_data, + .output_data = ide_output_data, +}; + static const struct ide_port_info via82cxxx_chipset __devinitdata = { .name = DRV_NAME, .init_chipset = init_chipset_via82cxxx, .enablebits = { { 0x40, 0x02, 0x02 }, { 0x40, 0x01, 0x01 } }, + .tp_ops = &via_tp_ops, .port_ops = &via_port_ops, .host_flags = IDE_HFLAG_PIO_NO_BLACKLIST | IDE_HFLAG_POST_SET_MODE | @@ -402,11 +487,6 @@ static int __devinit via_init_one(struct pci_dev *dev, const struct pci_device_i * Find the ISA bridge and check we know what it is. */ via_config = via_config_find(&isa); - if (!via_config->id) { - printk(KERN_WARNING DRV_NAME " %s: unknown chipset, skipping\n", - pci_name(dev)); - return -ENODEV; - } /* * Print the boot message. @@ -436,10 +516,13 @@ static int __devinit via_init_one(struct pci_dev *dev, const struct pci_device_i via_clock = 33333; } - if (idx == 0) - d.host_flags |= IDE_HFLAG_NO_AUTODMA; - else + if (idx == 1) d.enablebits[1].reg = d.enablebits[0].reg = 0; + else + d.host_flags |= IDE_HFLAG_NO_AUTODMA; + + if (idx == VIA_IDFLAG_SINGLE) + d.host_flags |= IDE_HFLAG_SINGLE; if ((via_config->flags & VIA_NO_UNMASK) == 0) d.host_flags |= IDE_HFLAG_UNMASK_IRQS; @@ -475,8 +558,9 @@ static const struct pci_device_id via_pci_tbl[] = { { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_82C576_1), 0 }, { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_82C586_1), 0 }, { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_CX700_IDE), 0 }, - { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_VX855_IDE), 0 }, + { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_VX855_IDE), VIA_IDFLAG_SINGLE }, { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_6410), 1 }, + { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_6415), 1 }, { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_SATA_EIDE), 1 }, { 0, }, }; @@ -504,6 +588,6 @@ static void __exit via_ide_exit(void) module_init(via_ide_init); module_exit(via_ide_exit); -MODULE_AUTHOR("Vojtech Pavlik, Michel Aubry, Jeff Garzik, Andre Hedrick"); +MODULE_AUTHOR("Vojtech Pavlik, Bartlomiej Zolnierkiewicz, Michel Aubry, Jeff Garzik, Andre Hedrick"); MODULE_DESCRIPTION("PCI driver module for VIA IDE"); MODULE_LICENSE("GPL"); diff --git a/include/linux/ide.h b/include/linux/ide.h index 0ec61295904..97e6ab43518 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -515,6 +515,8 @@ struct ide_drive_s { u8 init_speed; /* transfer rate set at boot */ u8 current_speed; /* current transfer rate set */ u8 desired_speed; /* desired transfer rate set */ + u8 pio_mode; /* for ->set_pio_mode _only_ */ + u8 dma_mode; /* for ->dma_pio_mode _only_ */ u8 dn; /* now wide spread use */ u8 acoustic; /* acoustic management */ u8 media; /* disk, cdrom, tape, floppy, ... */ @@ -622,8 +624,8 @@ extern const struct ide_tp_ops default_tp_ops; */ struct ide_port_ops { void (*init_dev)(ide_drive_t *); - void (*set_pio_mode)(ide_drive_t *, const u8); - void (*set_dma_mode)(ide_drive_t *, const u8); + void (*set_pio_mode)(struct hwif_s *, ide_drive_t *); + void (*set_dma_mode)(struct hwif_s *, ide_drive_t *); int (*reset_poll)(ide_drive_t *); void (*pre_reset)(ide_drive_t *); void (*resetproc)(ide_drive_t *); @@ -1494,7 +1496,6 @@ int ide_timing_compute(ide_drive_t *, u8, struct ide_timing *, int, int); #ifdef CONFIG_IDE_XFER_MODE int ide_scan_pio_blacklist(char *); const char *ide_xfer_verbose(u8); -u8 ide_get_best_pio_mode(ide_drive_t *, u8, u8); int ide_pio_need_iordy(ide_drive_t *, const u8); int ide_set_pio_mode(ide_drive_t *, u8); int ide_set_dma_mode(ide_drive_t *, u8); |