diff options
-rw-r--r-- | arch/sh/drivers/pci/pci-sh5.c (renamed from arch/sh64/kernel/pci_sh5.c) | 0 | ||||
-rw-r--r-- | arch/sh/drivers/pci/pci-sh5.h (renamed from arch/sh64/kernel/pci_sh5.h) | 0 | ||||
-rw-r--r-- | arch/sh/kernel/Makefile_32 | 2 | ||||
-rw-r--r-- | arch/sh/kernel/Makefile_64 | 2 | ||||
-rw-r--r-- | arch/sh/kernel/time_32.c (renamed from arch/sh/kernel/time.c) | 0 | ||||
-rw-r--r-- | arch/sh/kernel/time_64.c (renamed from arch/sh64/kernel/time.c) | 15 | ||||
-rw-r--r-- | arch/sh64/kernel/Makefile | 36 | ||||
-rw-r--r-- | arch/sh64/kernel/alphanum.c | 43 | ||||
-rw-r--r-- | arch/sh64/kernel/dma.c | 297 | ||||
-rw-r--r-- | arch/sh64/kernel/early_printk.c | 99 | ||||
-rw-r--r-- | arch/sh64/kernel/led.c | 40 | ||||
-rw-r--r-- | arch/sh64/kernel/pcibios.c | 168 | ||||
-rw-r--r-- | arch/sh64/kernel/setup.c | 379 |
13 files changed, 8 insertions, 1073 deletions
diff --git a/arch/sh64/kernel/pci_sh5.c b/arch/sh/drivers/pci/pci-sh5.c index b4d9534d2b0..b4d9534d2b0 100644 --- a/arch/sh64/kernel/pci_sh5.c +++ b/arch/sh/drivers/pci/pci-sh5.c diff --git a/arch/sh64/kernel/pci_sh5.h b/arch/sh/drivers/pci/pci-sh5.h index c71159dd04b..c71159dd04b 100644 --- a/arch/sh64/kernel/pci_sh5.h +++ b/arch/sh/drivers/pci/pci-sh5.h diff --git a/arch/sh/kernel/Makefile_32 b/arch/sh/kernel/Makefile_32 index 990ba74db0d..c8928983105 100644 --- a/arch/sh/kernel/Makefile_32 +++ b/arch/sh/kernel/Makefile_32 @@ -6,7 +6,7 @@ extra-y := head_32.o init_task.o vmlinux.lds obj-y := debugtraps.o io.o io_generic.o irq.o machvec.o process_32.o \ ptrace_32.o semaphore.o setup.o signal_32.o sys_sh.o sys_sh32.o \ - syscalls_32.o time.o topology.o traps.o traps_32.o + syscalls_32.o time_32.o topology.o traps.o traps_32.o obj-y += cpu/ timers/ obj-$(CONFIG_VSYSCALL) += vsyscall/ diff --git a/arch/sh/kernel/Makefile_64 b/arch/sh/kernel/Makefile_64 index 10e3ae1c64b..1ef21cc087f 100644 --- a/arch/sh/kernel/Makefile_64 +++ b/arch/sh/kernel/Makefile_64 @@ -2,7 +2,7 @@ extra-y := head_64.o init_task.o vmlinux.lds obj-y := debugtraps.o io.o io_generic.o irq.o machvec.o process_64.o \ ptrace_64.o semaphore.o setup.o signal_64.o sys_sh.o sys_sh64.o \ - syscalls_64.o time.o topology.o traps.o traps_64.o + syscalls_64.o time_64.o topology.o traps.o traps_64.o obj-y += cpu/ timers/ obj-$(CONFIG_VSYSCALL) += vsyscall/ diff --git a/arch/sh/kernel/time.c b/arch/sh/kernel/time_32.c index 2bc04bfee73..2bc04bfee73 100644 --- a/arch/sh/kernel/time.c +++ b/arch/sh/kernel/time_32.c diff --git a/arch/sh64/kernel/time.c b/arch/sh/kernel/time_64.c index d1a9b5b078b..4c52feead11 100644 --- a/arch/sh64/kernel/time.c +++ b/arch/sh/kernel/time_64.c @@ -31,14 +31,14 @@ #include <linux/bcd.h> #include <linux/timex.h> #include <linux/irq.h> +#include <linux/io.h> #include <linux/platform_device.h> -#include <asm/registers.h> /* required by inline __asm__ stmt. */ +#include <asm/cpu/registers.h> /* required by inline __asm__ stmt. */ +#include <asm/cpu/irq.h> +#include <asm/addrspace.h> #include <asm/processor.h> #include <asm/uaccess.h> -#include <asm/io.h> -#include <asm/irq.h> #include <asm/delay.h> -#include <asm/hardware.h> #define TMU_TOCR_INIT 0x00 #define TMU0_TCR_INIT 0x0020 @@ -240,11 +240,8 @@ static inline void do_timer_interrupt(void) profile_tick(CPU_PROFILING); #ifdef CONFIG_HEARTBEAT - { - extern void heartbeat(void); - - heartbeat(); - } + if (sh_mv.mv_heartbeat != NULL) + sh_mv.mv_heartbeat(); #endif /* diff --git a/arch/sh64/kernel/Makefile b/arch/sh64/kernel/Makefile deleted file mode 100644 index e3467bda616..00000000000 --- a/arch/sh64/kernel/Makefile +++ /dev/null @@ -1,36 +0,0 @@ -# -# This file is subject to the terms and conditions of the GNU General Public -# License. See the file "COPYING" in the main directory of this archive -# for more details. -# -# Copyright (C) 2000, 2001 Paolo Alberelli -# Copyright (C) 2003 Paul Mundt -# -# Makefile for the Linux sh64 kernel. -# -# Note! Dependencies are done automagically by 'make dep', which also -# removes any old dependencies. DON'T put your own dependencies here -# unless it's something special (ie not a .c file). -# - -extra-y := head.o init_task.o vmlinux.lds - -obj-y := process.o signal.o entry.o traps.o irq.o irq_intc.o \ - ptrace.o setup.o time.o sys_sh64.o semaphore.o sh_ksyms.o \ - switchto.o syscalls.o - -obj-$(CONFIG_HEARTBEAT) += led.o -obj-$(CONFIG_SH_ALPHANUMERIC) += alphanum.o -obj-$(CONFIG_SH_DMA) += dma.o -obj-$(CONFIG_SH_FPU) += fpu.o -obj-$(CONFIG_EARLY_PRINTK) += early_printk.o -obj-$(CONFIG_KALLSYMS) += unwind.o -obj-$(CONFIG_PCI) += pcibios.o -obj-$(CONFIG_MODULES) += module.o - -ifeq ($(CONFIG_PCI),y) -obj-$(CONFIG_CPU_SH5) += pci_sh5.o -endif - -USE_STANDARD_AS_RULE := true - diff --git a/arch/sh64/kernel/alphanum.c b/arch/sh64/kernel/alphanum.c deleted file mode 100644 index d1619d95fba..00000000000 --- a/arch/sh64/kernel/alphanum.c +++ /dev/null @@ -1,43 +0,0 @@ -/* - * arch/sh64/kernel/alphanum.c - * - * Copyright (C) 2002 Stuart Menefy <stuart.menefy@st.com> - * - * May be copied or modified under the terms of the GNU General Public - * License. See linux/COPYING for more information. - * - * Machine-independent functions for handling 8-digit alphanumeric display - * (e.g. Agilent HDSP-253x) - */ -#include <linux/stddef.h> -#include <linux/sched.h> - -void mach_alphanum(int pos, unsigned char val); - -void print_seg(char *file, int line) -{ - int i; - unsigned int nibble; - - for (i = 0; i < 5; i++) { - mach_alphanum(i, file[i]); - } - - for (i = 0; i < 3; i++) { - nibble = ((line >> (i * 4)) & 0xf); - mach_alphanum(7 - i, nibble + ((nibble > 9) ? 55 : 48)); - } -} - -void print_seg_num(unsigned num) -{ - int i; - unsigned int nibble; - - for (i = 0; i < 8; i++) { - nibble = ((num >> (i * 4)) & 0xf); - - mach_alphanum(7 - i, nibble + ((nibble > 9) ? 55 : 48)); - } -} - diff --git a/arch/sh64/kernel/dma.c b/arch/sh64/kernel/dma.c deleted file mode 100644 index 32c6f0549bf..00000000000 --- a/arch/sh64/kernel/dma.c +++ /dev/null @@ -1,297 +0,0 @@ -/* - * arch/sh64/kernel/dma.c - * - * DMA routines for the SH-5 DMAC. - * - * Copyright (C) 2003 Paul Mundt - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ -#include <linux/init.h> -#include <linux/module.h> -#include <linux/interrupt.h> -#include <linux/types.h> -#include <linux/irq.h> -#include <linux/spinlock.h> -#include <linux/mm.h> -#include <asm/hardware.h> -#include <asm/dma.h> -#include <asm/signal.h> -#include <asm/errno.h> -#include <asm/io.h> - -typedef struct { - unsigned long dev_addr; - unsigned long mem_addr; - - unsigned int mode; - unsigned int count; -} dma_info_t; - -static dma_info_t dma_info[MAX_DMA_CHANNELS]; -static DEFINE_SPINLOCK(dma_spin_lock); - -/* arch/sh64/kernel/irq_intc.c */ -extern void make_intc_irq(unsigned int irq); - -/* DMAC Interrupts */ -#define DMA_IRQ_DMTE0 18 -#define DMA_IRQ_DERR 22 - -#define DMAC_COMMON_BASE (dmac_base + 0x08) -#define DMAC_SAR_BASE (dmac_base + 0x10) -#define DMAC_DAR_BASE (dmac_base + 0x18) -#define DMAC_COUNT_BASE (dmac_base + 0x20) -#define DMAC_CTRL_BASE (dmac_base + 0x28) -#define DMAC_STATUS_BASE (dmac_base + 0x30) - -#define DMAC_SAR(n) (DMAC_SAR_BASE + ((n) * 0x28)) -#define DMAC_DAR(n) (DMAC_DAR_BASE + ((n) * 0x28)) -#define DMAC_COUNT(n) (DMAC_COUNT_BASE + ((n) * 0x28)) -#define DMAC_CTRL(n) (DMAC_CTRL_BASE + ((n) * 0x28)) -#define DMAC_STATUS(n) (DMAC_STATUS_BASE + ((n) * 0x28)) - -/* DMAC.COMMON Bit Definitions */ -#define DMAC_COMMON_PR 0x00000001 /* Priority */ - /* Bits 1-2 Reserved */ -#define DMAC_COMMON_ME 0x00000008 /* Master Enable */ -#define DMAC_COMMON_NMI 0x00000010 /* NMI Flag */ - /* Bits 5-6 Reserved */ -#define DMAC_COMMON_ER 0x00000780 /* Error Response */ -#define DMAC_COMMON_AAE 0x00007800 /* Address Alignment Error */ - /* Bits 15-63 Reserved */ - -/* DMAC.SAR Bit Definitions */ -#define DMAC_SAR_ADDR 0xffffffff /* Source Address */ - -/* DMAC.DAR Bit Definitions */ -#define DMAC_DAR_ADDR 0xffffffff /* Destination Address */ - -/* DMAC.COUNT Bit Definitions */ -#define DMAC_COUNT_CNT 0xffffffff /* Transfer Count */ - -/* DMAC.CTRL Bit Definitions */ -#define DMAC_CTRL_TS 0x00000007 /* Transfer Size */ -#define DMAC_CTRL_SI 0x00000018 /* Source Increment */ -#define DMAC_CTRL_DI 0x00000060 /* Destination Increment */ -#define DMAC_CTRL_RS 0x00000780 /* Resource Select */ -#define DMAC_CTRL_IE 0x00000800 /* Interrupt Enable */ -#define DMAC_CTRL_TE 0x00001000 /* Transfer Enable */ - /* Bits 15-63 Reserved */ - -/* DMAC.STATUS Bit Definitions */ -#define DMAC_STATUS_TE 0x00000001 /* Transfer End */ -#define DMAC_STATUS_AAE 0x00000002 /* Address Alignment Error */ - /* Bits 2-63 Reserved */ - -static unsigned long dmac_base; - -void set_dma_count(unsigned int chan, unsigned int count); -void set_dma_addr(unsigned int chan, unsigned int addr); - -static irqreturn_t dma_mte(int irq, void *dev_id, struct pt_regs *regs) -{ - unsigned int chan = irq - DMA_IRQ_DMTE0; - dma_info_t *info = dma_info + chan; - u64 status; - - if (info->mode & DMA_MODE_WRITE) { - sh64_out64(info->mem_addr & DMAC_SAR_ADDR, DMAC_SAR(chan)); - } else { - sh64_out64(info->mem_addr & DMAC_DAR_ADDR, DMAC_DAR(chan)); - } - - set_dma_count(chan, info->count); - - /* Clear the TE bit */ - status = sh64_in64(DMAC_STATUS(chan)); - status &= ~DMAC_STATUS_TE; - sh64_out64(status, DMAC_STATUS(chan)); - - return IRQ_HANDLED; -} - -static struct irqaction irq_dmte = { - .handler = dma_mte, - .flags = IRQF_DISABLED, - .name = "DMA MTE", -}; - -static irqreturn_t dma_err(int irq, void *dev_id, struct pt_regs *regs) -{ - u64 tmp; - u8 chan; - - printk(KERN_NOTICE "DMAC: Got a DMA Error!\n"); - - tmp = sh64_in64(DMAC_COMMON_BASE); - - /* Check for the type of error */ - if ((chan = tmp & DMAC_COMMON_AAE)) { - /* It's an address alignment error.. */ - printk(KERN_NOTICE "DMAC: Alignment error on channel %d, ", chan); - - printk(KERN_NOTICE "SAR: 0x%08llx, DAR: 0x%08llx, COUNT: %lld\n", - (sh64_in64(DMAC_SAR(chan)) & DMAC_SAR_ADDR), - (sh64_in64(DMAC_DAR(chan)) & DMAC_DAR_ADDR), - (sh64_in64(DMAC_COUNT(chan)) & DMAC_COUNT_CNT)); - - } else if ((chan = tmp & DMAC_COMMON_ER)) { - /* Something else went wrong.. */ - printk(KERN_NOTICE "DMAC: Error on channel %d\n", chan); - } - - /* Reset the ME bit to clear the interrupt */ - tmp |= DMAC_COMMON_ME; - sh64_out64(tmp, DMAC_COMMON_BASE); - - return IRQ_HANDLED; -} - -static struct irqaction irq_derr = { - .handler = dma_err, - .flags = IRQF_DISABLED, - .name = "DMA Error", -}; - -static inline unsigned long calc_xmit_shift(unsigned int chan) -{ - return sh64_in64(DMAC_CTRL(chan)) & 0x03; -} - -void setup_dma(unsigned int chan, dma_info_t *info) -{ - unsigned int irq = DMA_IRQ_DMTE0 + chan; - dma_info_t *dma = dma_info + chan; - - make_intc_irq(irq); - setup_irq(irq, &irq_dmte); - dma = info; -} - -void enable_dma(unsigned int chan) -{ - u64 ctrl; - - ctrl = sh64_in64(DMAC_CTRL(chan)); - ctrl |= DMAC_CTRL_TE; - sh64_out64(ctrl, DMAC_CTRL(chan)); -} - -void disable_dma(unsigned int chan) -{ - u64 ctrl; - - ctrl = sh64_in64(DMAC_CTRL(chan)); - ctrl &= ~DMAC_CTRL_TE; - sh64_out64(ctrl, DMAC_CTRL(chan)); -} - -void set_dma_mode(unsigned int chan, char mode) -{ - dma_info_t *info = dma_info + chan; - - info->mode = mode; - - set_dma_addr(chan, info->mem_addr); - set_dma_count(chan, info->count); -} - -void set_dma_addr(unsigned int chan, unsigned int addr) -{ - dma_info_t *info = dma_info + chan; - unsigned long sar, dar; - - info->mem_addr = addr; - sar = (info->mode & DMA_MODE_WRITE) ? info->mem_addr : info->dev_addr; - dar = (info->mode & DMA_MODE_WRITE) ? info->dev_addr : info->mem_addr; - - sh64_out64(sar & DMAC_SAR_ADDR, DMAC_SAR(chan)); - sh64_out64(dar & DMAC_SAR_ADDR, DMAC_DAR(chan)); -} - -void set_dma_count(unsigned int chan, unsigned int count) -{ - dma_info_t *info = dma_info + chan; - u64 tmp; - - info->count = count; - - tmp = (info->count >> calc_xmit_shift(chan)) & DMAC_COUNT_CNT; - - sh64_out64(tmp, DMAC_COUNT(chan)); -} - -unsigned long claim_dma_lock(void) -{ - unsigned long flags; - - spin_lock_irqsave(&dma_spin_lock, flags); - - return flags; -} - -void release_dma_lock(unsigned long flags) -{ - spin_unlock_irqrestore(&dma_spin_lock, flags); -} - -int get_dma_residue(unsigned int chan) -{ - return sh64_in64(DMAC_COUNT(chan) << calc_xmit_shift(chan)); -} - -int __init init_dma(void) -{ - struct vcr_info vcr; - u64 tmp; - - /* Remap the DMAC */ - dmac_base = onchip_remap(PHYS_DMAC_BLOCK, 1024, "DMAC"); - if (!dmac_base) { - printk(KERN_ERR "Unable to remap DMAC\n"); - return -ENOMEM; - } - - /* Report DMAC.VCR Info */ - vcr = sh64_get_vcr_info(dmac_base); - printk("DMAC: Module ID: 0x%04x, Module version: 0x%04x\n", - vcr.mod_id, vcr.mod_vers); - - /* Set the ME bit */ - tmp = sh64_in64(DMAC_COMMON_BASE); - tmp |= DMAC_COMMON_ME; - sh64_out64(tmp, DMAC_COMMON_BASE); - - /* Enable the DMAC Error Interrupt */ - make_intc_irq(DMA_IRQ_DERR); - setup_irq(DMA_IRQ_DERR, &irq_derr); - - return 0; -} - -static void __exit exit_dma(void) -{ - onchip_unmap(dmac_base); - free_irq(DMA_IRQ_DERR, 0); -} - -module_init(init_dma); -module_exit(exit_dma); - -MODULE_AUTHOR("Paul Mundt"); -MODULE_DESCRIPTION("DMA API for SH-5 DMAC"); -MODULE_LICENSE("GPL"); - -EXPORT_SYMBOL(setup_dma); -EXPORT_SYMBOL(claim_dma_lock); -EXPORT_SYMBOL(release_dma_lock); -EXPORT_SYMBOL(enable_dma); -EXPORT_SYMBOL(disable_dma); -EXPORT_SYMBOL(set_dma_mode); -EXPORT_SYMBOL(set_dma_addr); -EXPORT_SYMBOL(set_dma_count); -EXPORT_SYMBOL(get_dma_residue); - diff --git a/arch/sh64/kernel/early_printk.c b/arch/sh64/kernel/early_printk.c deleted file mode 100644 index 4f913112367..00000000000 --- a/arch/sh64/kernel/early_printk.c +++ /dev/null @@ -1,99 +0,0 @@ -/* - * arch/sh64/kernel/early_printk.c - * - * SH-5 Early SCIF console (cloned and hacked from sh implementation) - * - * Copyright (C) 2003, 2004 Paul Mundt <lethal@linux-sh.org> - * Copyright (C) 2002 M. R. Brown <mrbrown@0xd6.org> - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ -#include <linux/console.h> -#include <linux/tty.h> -#include <linux/init.h> -#include <asm/io.h> -#include <asm/hardware.h> - -#define SCIF_BASE_ADDR 0x01030000 -#define SCIF_ADDR_SH5 PHYS_PERIPHERAL_BLOCK+SCIF_BASE_ADDR - -/* - * Fixed virtual address where SCIF is mapped (should already be done - * in arch/sh64/kernel/head.S!). - */ -#define SCIF_REG 0xfa030000 - -enum { - SCIF_SCSMR2 = SCIF_REG + 0x00, - SCIF_SCBRR2 = SCIF_REG + 0x04, - SCIF_SCSCR2 = SCIF_REG + 0x08, - SCIF_SCFTDR2 = SCIF_REG + 0x0c, - SCIF_SCFSR2 = SCIF_REG + 0x10, - SCIF_SCFRDR2 = SCIF_REG + 0x14, - SCIF_SCFCR2 = SCIF_REG + 0x18, - SCIF_SCFDR2 = SCIF_REG + 0x1c, - SCIF_SCSPTR2 = SCIF_REG + 0x20, - SCIF_SCLSR2 = SCIF_REG + 0x24, -}; - -static void sh_console_putc(int c) -{ - while (!(ctrl_inw(SCIF_SCFSR2) & 0x20)) - cpu_relax(); - - ctrl_outb(c, SCIF_SCFTDR2); - ctrl_outw((ctrl_inw(SCIF_SCFSR2) & 0x9f), SCIF_SCFSR2); - - if (c == '\n') - sh_console_putc('\r'); -} - -static void sh_console_flush(void) -{ - ctrl_outw((ctrl_inw(SCIF_SCFSR2) & 0xbf), SCIF_SCFSR2); - - while (!(ctrl_inw(SCIF_SCFSR2) & 0x40)) - cpu_relax(); - - ctrl_outw((ctrl_inw(SCIF_SCFSR2) & 0xbf), SCIF_SCFSR2); -} - -static void sh_console_write(struct console *con, const char *s, unsigned count) -{ - while (count-- > 0) - sh_console_putc(*s++); - - sh_console_flush(); -} - -static int __init sh_console_setup(struct console *con, char *options) -{ - con->cflag = CREAD | HUPCL | CLOCAL | B19200 | CS8; - - return 0; -} - -static struct console sh_console = { - .name = "scifcon", - .write = sh_console_write, - .setup = sh_console_setup, - .flags = CON_PRINTBUFFER | CON_BOOT, - .index = -1, -}; - -void __init enable_early_printk(void) -{ - ctrl_outb(0x2a, SCIF_SCBRR2); /* 19200bps */ - - ctrl_outw(0x04, SCIF_SCFCR2); /* Reset TFRST */ - ctrl_outw(0x10, SCIF_SCFCR2); /* TTRG0=1 */ - - ctrl_outw(0, SCIF_SCSPTR2); - ctrl_outw(0x60, SCIF_SCFSR2); - ctrl_outw(0, SCIF_SCLSR2); - ctrl_outw(0x30, SCIF_SCSCR2); - - register_console(&sh_console); -} diff --git a/arch/sh64/kernel/led.c b/arch/sh64/kernel/led.c deleted file mode 100644 index e35d3f667fb..00000000000 --- a/arch/sh64/kernel/led.c +++ /dev/null @@ -1,40 +0,0 @@ -/* - * arch/sh64/kernel/led.c - * - * Copyright (C) 2002 Stuart Menefy <stuart.menefy@st.com> - * - * May be copied or modified under the terms of the GNU General Public - * License. See linux/COPYING for more information. - * - * Flash the LEDs - */ -#include <linux/stddef.h> -#include <linux/sched.h> - -void mach_led(int pos, int val); - -/* acts like an actual heart beat -- ie thump-thump-pause... */ -void heartbeat(void) -{ - static unsigned int cnt = 0, period = 0, dist = 0; - - if (cnt == 0 || cnt == dist) { - mach_led(-1, 1); - } else if (cnt == 7 || cnt == dist + 7) { - mach_led(-1, 0); - } - - if (++cnt > period) { - cnt = 0; - - /* - * The hyperbolic function below modifies the heartbeat period - * length in dependency of the current (5min) load. It goes - * through the points f(0)=126, f(1)=86, f(5)=51, f(inf)->30. - */ - period = ((672 << FSHIFT) / (5 * avenrun[0] + - (7 << FSHIFT))) + 30; - dist = period / 4; - } -} - diff --git a/arch/sh64/kernel/pcibios.c b/arch/sh64/kernel/pcibios.c deleted file mode 100644 index 945920bc24d..00000000000 --- a/arch/sh64/kernel/pcibios.c +++ /dev/null @@ -1,168 +0,0 @@ -/* - * $Id: pcibios.c,v 1.1 2001/08/24 12:38:19 dwmw2 Exp $ - * - * arch/sh/kernel/pcibios.c - * - * Copyright (C) 2002 STMicroelectronics Limited - * Author : David J. McKay - * - * Copyright (C) 2004 Richard Curnow, SuperH UK Limited - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * This is GPL'd. - * - * Provided here are generic versions of: - * pcibios_update_resource() - * pcibios_align_resource() - * pcibios_enable_device() - * pcibios_set_master() - * pcibios_update_irq() - * - * These functions are collected here to reduce duplication of common - * code amongst the many platform-specific PCI support code files. - * - * Platform-specific files are expected to provide: - * pcibios_fixup_bus() - * pcibios_init() - * pcibios_setup() - * pcibios_fixup_pbus_ranges() - */ - -#include <linux/kernel.h> -#include <linux/pci.h> -#include <linux/init.h> - -void -pcibios_update_resource(struct pci_dev *dev, struct resource *root, - struct resource *res, int resource) -{ - u32 new, check; - int reg; - - new = res->start | (res->flags & PCI_REGION_FLAG_MASK); - if (resource < 6) { - reg = PCI_BASE_ADDRESS_0 + 4*resource; - } else if (resource == PCI_ROM_RESOURCE) { - res->flags |= IORESOURCE_ROM_ENABLE; - new |= PCI_ROM_ADDRESS_ENABLE; - reg = dev->rom_base_reg; - } else { - /* Somebody might have asked allocation of a non-standard resource */ - return; - } - - pci_write_config_dword(dev, reg, new); - pci_read_config_dword(dev, reg, &check); - if ((new ^ check) & ((new & PCI_BASE_ADDRESS_SPACE_IO) ? PCI_BASE_ADDRESS_IO_MASK : PCI_BASE_ADDRESS_MEM_MASK)) { - printk(KERN_ERR "PCI: Error while updating region " - "%s/%d (%08x != %08x)\n", pci_name(dev), resource, - new, check); - } -} - -/* - * We need to avoid collisions with `mirrored' VGA ports - * and other strange ISA hardware, so we always want the - * addresses to be allocated in the 0x000-0x0ff region - * modulo 0x400. - */ -void pcibios_align_resource(void *data, struct resource *res, - resource_size_t size, resource_size_t align) -{ - if (res->flags & IORESOURCE_IO) { - resource_size_t start = res->start; - - if (start & 0x300) { - start = (start + 0x3ff) & ~0x3ff; - res->start = start; - } - } -} - -static void pcibios_enable_bridge(struct pci_dev *dev) -{ - struct pci_bus *bus = dev->subordinate; - u16 cmd, old_cmd; - - pci_read_config_word(dev, PCI_COMMAND, &cmd); - old_cmd = cmd; - - if (bus->resource[0]->flags & IORESOURCE_IO) { - cmd |= PCI_COMMAND_IO; - } - if ((bus->resource[1]->flags & IORESOURCE_MEM) || - (bus->resource[2]->flags & IORESOURCE_PREFETCH)) { - cmd |= PCI_COMMAND_MEMORY; - } - - if (cmd != old_cmd) { - pci_write_config_word(dev, PCI_COMMAND, cmd); - } - - printk("PCI bridge %s, command register -> %04x\n", - pci_name(dev), cmd); - -} - - - -int pcibios_enable_device(struct pci_dev *dev, int mask) -{ - u16 cmd, old_cmd; - int idx; - struct resource *r; - - if ((dev->class >> 8) == PCI_CLASS_BRIDGE_PCI) { - pcibios_enable_bridge(dev); - } - - pci_read_config_word(dev, PCI_COMMAND, &cmd); - old_cmd = cmd; - for(idx=0; idx<6; idx++) { - if (!(mask & (1 << idx))) - continue; - r = &dev->resource[idx]; - if (!r->start && r->end) { - printk(KERN_ERR "PCI: Device %s not available because of resource collisions\n", pci_name(dev)); - return -EINVAL; - } - if (r->flags & IORESOURCE_IO) - cmd |= PCI_COMMAND_IO; - if (r->flags & IORESOURCE_MEM) - cmd |= PCI_COMMAND_MEMORY; - } - if (dev->resource[PCI_ROM_RESOURCE].start) - cmd |= PCI_COMMAND_MEMORY; - if (cmd != old_cmd) { - printk(KERN_INFO "PCI: Enabling device %s (%04x -> %04x)\n", pci_name(dev), old_cmd, cmd); - pci_write_config_word(dev, PCI_COMMAND, cmd); - } - return 0; -} - -/* - * If we set up a device for bus mastering, we need to check and set - * the latency timer as it may not be properly set. - */ -unsigned int pcibios_max_latency = 255; - -void pcibios_set_master(struct pci_dev *dev) -{ - u8 lat; - pci_read_config_byte(dev, PCI_LATENCY_TIMER, &lat); - if (lat < 16) - lat = (64 <= pcibios_max_latency) ? 64 : pcibios_max_latency; - else if (lat > pcibios_max_latency) - lat = pcibios_max_latency; - else - return; - printk(KERN_INFO "PCI: Setting latency timer of device %s to %d\n", pci_name(dev), lat); - pci_write_config_byte(dev, PCI_LATENCY_TIMER, lat); -} - -void __init pcibios_update_irq(struct pci_dev *dev, int irq) -{ - pci_write_config_byte(dev, PCI_INTERRUPT_LINE, irq); -} diff --git a/arch/sh64/kernel/setup.c b/arch/sh64/kernel/setup.c deleted file mode 100644 index 2b7264c0c6f..00000000000 --- a/arch/sh64/kernel/setup.c +++ /dev/null @@ -1,379 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * arch/sh64/kernel/setup.c - * - * sh64 Arch Support - * - * This file handles the architecture-dependent parts of initialization - * - * Copyright (C) 2000, 2001 Paolo Alberelli - * Copyright (C) 2003, 2004 Paul Mundt - * - * benedict.gaster@superh.com: 2nd May 2002 - * Modified to use the empty_zero_page to pass command line arguments. - * - * benedict.gaster@superh.com: 3rd May 2002 - * Added support for ramdisk, removing statically linked romfs at the same time. - * - * lethal@linux-sh.org: 15th May 2003 - * Added generic procfs cpuinfo reporting. Make boards just export their name. - * - * lethal@linux-sh.org: 25th May 2003 - * Added generic get_cpu_subtype() for subtype reporting from cpu_data->type. - * - */ -#include <linux/errno.h> -#include <linux/rwsem.h> -#include <linux/sched.h> -#include <linux/kernel.h> -#include <linux/mm.h> -#include <linux/stddef.h> -#include <linux/unistd.h> -#include <linux/ptrace.h> -#include <linux/slab.h> -#include <linux/user.h> -#include <linux/a.out.h> -#include <linux/screen_info.h> -#include <linux/ioport.h> -#include <linux/delay.h> -#include <linux/init.h> -#include <linux/seq_file.h> -#include <linux/blkdev.h> -#include <linux/bootmem.h> -#include <linux/console.h> -#include <linux/root_dev.h> -#include <linux/cpu.h> -#include <linux/initrd.h> -#include <linux/pfn.h> -#include <asm/processor.h> -#include <asm/page.h> -#include <asm/pgtable.h> -#include <asm/platform.h> -#include <asm/uaccess.h> -#include <asm/system.h> -#include <asm/io.h> -#include <asm/sections.h> -#include <asm/setup.h> -#include <asm/smp.h> - -struct screen_info screen_info; - -#ifdef CONFIG_BLK_DEV_RAM -extern int rd_doload; /* 1 = load ramdisk, 0 = don't load */ -extern int rd_prompt; /* 1 = prompt for ramdisk, 0 = don't prompt */ -extern int rd_image_start; /* starting block # of image */ -#endif - -extern int root_mountflags; -extern char *get_system_type(void); -extern void platform_setup(void); -extern void platform_monitor(void); -extern void platform_reserve(void); -extern int sh64_cache_init(void); -extern int sh64_tlb_init(void); - -#define RAMDISK_IMAGE_START_MASK 0x07FF -#define RAMDISK_PROMPT_FLAG 0x8000 -#define RAMDISK_LOAD_FLAG 0x4000 - -static char __initdata command_line[COMMAND_LINE_SIZE] = { 0, }; -unsigned long long memory_start = CONFIG_MEMORY_START; -unsigned long long memory_end = CONFIG_MEMORY_START + (CONFIG_MEMORY_SIZE_IN_MB * 1024 * 1024); - -struct sh_cpuinfo boot_cpu_data; - -static inline void parse_mem_cmdline (char ** cmdline_p) -{ - char c = ' ', *to = command_line, *from = COMMAND_LINE; - int len = 0; - - /* Save unparsed command line copy for /proc/cmdline */ - memcpy(boot_command_line, COMMAND_LINE, COMMAND_LINE_SIZE); - boot_command_line[COMMAND_LINE_SIZE-1] = '\0'; - - for (;;) { - /* - * "mem=XXX[kKmM]" defines a size of memory. - */ - if (c == ' ' && !memcmp(from, "mem=", 4)) { - if (to != command_line) - to--; - { - unsigned long mem_size; - - mem_size = memparse(from+4, &from); - memory_end = memory_start + mem_size; - } - } - c = *(from++); - if (!c) - break; - if (COMMAND_LINE_SIZE <= ++len) - break; - *(to++) = c; - } - *to = '\0'; - - *cmdline_p = command_line; -} - -static void __init sh64_cpu_type_detect(void) -{ - extern unsigned long long peek_real_address_q(unsigned long long addr); - unsigned long long cir; - /* Do peeks in real mode to avoid having to set up a mapping for the - WPC registers. On SH5-101 cut2, such a mapping would be exposed to - an address translation erratum which would make it hard to set up - correctly. */ - cir = peek_real_address_q(0x0d000008); - - if ((cir & 0xffff) == 0x5103) { - boot_cpu_data.type = CPU_SH5_103; - } else if (((cir >> 32) & 0xffff) == 0x51e2) { - /* CPU.VCR aliased at CIR address on SH5-101 */ - boot_cpu_data.type = CPU_SH5_101; - } else { - boot_cpu_data.type = CPU_SH_NONE; - } -} - -void __init setup_arch(char **cmdline_p) -{ - unsigned long bootmap_size, i; - unsigned long first_pfn, start_pfn, last_pfn, pages; - -#ifdef CONFIG_EARLY_PRINTK - extern void enable_early_printk(void); - - /* - * Setup Early SCIF console - */ - enable_early_printk(); -#endif - - /* - * Setup TLB mappings - */ - sh64_tlb_init(); - - /* - * Caches are already initialized by the time we get here, so we just - * fill in cpu_data info for the caches. - */ - sh64_cache_init(); - - platform_setup(); - platform_monitor(); - - sh64_cpu_type_detect(); - - ROOT_DEV = old_decode_dev(ORIG_ROOT_DEV); - -#ifdef CONFIG_BLK_DEV_RAM - rd_image_start = RAMDISK_FLAGS & RAMDISK_IMAGE_START_MASK; - rd_prompt = ((RAMDISK_FLAGS & RAMDISK_PROMPT_FLAG) != 0); - rd_doload = ((RAMDISK_FLAGS & RAMDISK_LOAD_FLAG) != 0); -#endif - - if (!MOUNT_ROOT_RDONLY) - root_mountflags &= ~MS_RDONLY; - init_mm.start_code = (unsigned long) _text; - init_mm.end_code = (unsigned long) _etext; - init_mm.end_data = (unsigned long) _edata; - init_mm.brk = (unsigned long) _end; - - code_resource.start = __pa(_text); - code_resource.end = __pa(_etext)-1; - data_resource.start = __pa(_etext); - data_resource.end = __pa(_edata)-1; - - parse_mem_cmdline(cmdline_p); - - /* - * Find the lowest and highest page frame numbers we have available - */ - first_pfn = PFN_DOWN(memory_start); - last_pfn = PFN_DOWN(memory_end); - pages = last_pfn - first_pfn; - - /* - * Partially used pages are not usable - thus - * we are rounding upwards: - */ - start_pfn = PFN_UP(__pa(_end)); - - /* - * Find a proper area for the bootmem bitmap. After this - * bootstrap step all allocations (until the page allocator - * is intact) must be done via bootmem_alloc(). - */ - bootmap_size = init_bootmem_node(NODE_DATA(0), start_pfn, - first_pfn, - last_pfn); - /* - * Round it up. - */ - bootmap_size = PFN_PHYS(PFN_UP(bootmap_size)); - - /* - * Register fully available RAM pages with the bootmem allocator. - */ - free_bootmem_node(NODE_DATA(0), PFN_PHYS(first_pfn), PFN_PHYS(pages)); - - /* - * Reserve all kernel sections + bootmem bitmap + a guard page. - */ - reserve_bootmem_node(NODE_DATA(0), PFN_PHYS(first_pfn), - (PFN_PHYS(start_pfn) + bootmap_size + PAGE_SIZE) - PFN_PHYS(first_pfn)); - - /* - * Reserve platform dependent sections - */ - platform_reserve(); - -#ifdef CONFIG_BLK_DEV_INITRD - if (LOADER_TYPE && INITRD_START) { - if (INITRD_START + INITRD_SIZE <= (PFN_PHYS(last_pfn))) { - reserve_bootmem_node(NODE_DATA(0), INITRD_START + __MEMORY_START, INITRD_SIZE); - - initrd_start = (long) INITRD_START + PAGE_OFFSET + __MEMORY_START; - initrd_end = initrd_start + INITRD_SIZE; - } else { - printk("initrd extends beyond end of memory " - "(0x%08lx > 0x%08lx)\ndisabling initrd\n", - (long) INITRD_START + INITRD_SIZE, - PFN_PHYS(last_pfn)); - initrd_start = 0; - } - } -#endif - - /* - * Claim all RAM, ROM, and I/O resources. - */ - - /* Kernel RAM */ - request_resource(&iomem_resource, &code_resource); - request_resource(&iomem_resource, &data_resource); - - /* Other KRAM space */ - for (i = 0; i < STANDARD_KRAM_RESOURCES - 2; i++) - request_resource(&iomem_resource, - &platform_parms.kram_res_p[i]); - - /* XRAM space */ - for (i = 0; i < STANDARD_XRAM_RESOURCES; i++) - request_resource(&iomem_resource, - &platform_parms.xram_res_p[i]); - - /* ROM space */ - for (i = 0; i < STANDARD_ROM_RESOURCES; i++) - request_resource(&iomem_resource, - &platform_parms.rom_res_p[i]); - - /* I/O space */ - for (i = 0; i < STANDARD_IO_RESOURCES; i++) - request_resource(&ioport_resource, - &platform_parms.io_res_p[i]); - - -#ifdef CONFIG_VT -#if defined(CONFIG_VGA_CONSOLE) - conswitchp = &vga_con; -#elif defined(CONFIG_DUMMY_CONSOLE) - conswitchp = &dummy_con; -#endif -#endif - - printk("Hardware FPU: %s\n", fpu_in_use ? "enabled" : "disabled"); - - paging_init(); -} - -void __xchg_called_with_bad_pointer(void) -{ - printk(KERN_EMERG "xchg() called with bad pointer !\n"); -} - -static struct cpu cpu[1]; - -static int __init topology_init(void) -{ - return register_cpu(cpu, 0); -} - -subsys_initcall(topology_init); - -/* - * Get CPU information - */ -static const char *cpu_name[] = { - [CPU_SH5_101] = "SH5-101", - [CPU_SH5_103] = "SH5-103", - [CPU_SH_NONE] = "Unknown", -}; - -const char *get_cpu_subtype(void) -{ - return cpu_name[boot_cpu_data.type]; -} - -#ifdef CONFIG_PROC_FS -static int show_cpuinfo(struct seq_file *m,void *v) -{ - unsigned int cpu = smp_processor_id(); - - if (!cpu) - seq_printf(m, "machine\t\t: %s\n", get_system_type()); - - seq_printf(m, "processor\t: %d\n", cpu); - seq_printf(m, "cpu family\t: SH-5\n"); - seq_printf(m, "cpu type\t: %s\n", get_cpu_subtype()); - - seq_printf(m, "icache size\t: %dK-bytes\n", - (boot_cpu_data.icache.ways * - boot_cpu_data.icache.sets * - boot_cpu_data.icache.linesz) >> 10); - seq_printf(m, "dcache size\t: %dK-bytes\n", - (boot_cpu_data.dcache.ways * - boot_cpu_data.dcache.sets * - boot_cpu_data.dcache.linesz) >> 10); - seq_printf(m, "itlb entries\t: %d\n", boot_cpu_data.itlb.entries); - seq_printf(m, "dtlb entries\t: %d\n", boot_cpu_data.dtlb.entries); - -#define PRINT_CLOCK(name, value) \ - seq_printf(m, name " clock\t: %d.%02dMHz\n", \ - ((value) / 1000000), ((value) % 1000000)/10000) - - PRINT_CLOCK("cpu", boot_cpu_data.cpu_clock); - PRINT_CLOCK("bus", boot_cpu_data.bus_clock); - PRINT_CLOCK("module", boot_cpu_data.module_clock); - - seq_printf(m, "bogomips\t: %lu.%02lu\n\n", - (loops_per_jiffy*HZ+2500)/500000, - ((loops_per_jiffy*HZ+2500)/5000) % 100); - - return 0; -} - -static void *c_start(struct seq_file *m, loff_t *pos) -{ - return (void*)(*pos == 0); -} -static void *c_next(struct seq_file *m, void *v, loff_t *pos) -{ - return NULL; -} -static void c_stop(struct seq_file *m, void *v) -{ -} -struct seq_operations cpuinfo_op = { - .start = c_start, - .next = c_next, - .stop = c_stop, - .show = show_cpuinfo, -}; -#endif /* CONFIG_PROC_FS */ |