diff options
| -rw-r--r-- | drivers/mmc/core/bus.c | 2 | ||||
| -rw-r--r-- | drivers/mmc/core/sd.c | 2 | ||||
| -rw-r--r-- | drivers/mmc/core/sdio.c | 329 | ||||
| -rw-r--r-- | include/linux/mmc/card.h | 4 | ||||
| -rw-r--r-- | include/linux/mmc/sdio.h | 29 |
5 files changed, 336 insertions, 30 deletions
diff --git a/drivers/mmc/core/bus.c b/drivers/mmc/core/bus.c index 6be49249895..f8a228a61fd 100644 --- a/drivers/mmc/core/bus.c +++ b/drivers/mmc/core/bus.c @@ -305,7 +305,7 @@ int mmc_add_card(struct mmc_card *card) } else { printk(KERN_INFO "%s: new %s%s%s card at address %04x\n", mmc_hostname(card->host), - mmc_sd_card_uhs(card) ? "ultra high speed " : + mmc_card_uhs(card) ? "ultra high speed " : (mmc_card_highspeed(card) ? "high speed " : ""), mmc_card_ddr_mode(card) ? "DDR " : "", type, card->rca); diff --git a/drivers/mmc/core/sd.c b/drivers/mmc/core/sd.c index f54392c4638..85b858f6d5d 100644 --- a/drivers/mmc/core/sd.c +++ b/drivers/mmc/core/sd.c @@ -960,7 +960,7 @@ static int mmc_sd_init_card(struct mmc_host *host, u32 ocr, goto free_card; /* Card is an ultra-high-speed card */ - mmc_sd_card_set_uhs(card); + mmc_card_set_uhs(card); /* * Since initialization is now complete, enable preset diff --git a/drivers/mmc/core/sdio.c b/drivers/mmc/core/sdio.c index 3ab565e32a6..8c04f7f46de 100644 --- a/drivers/mmc/core/sdio.c +++ b/drivers/mmc/core/sdio.c @@ -102,6 +102,7 @@ static int sdio_read_cccr(struct mmc_card *card) int ret; int cccr_vsn; unsigned char data; + unsigned char speed; memset(&card->cccr, 0, sizeof(struct sdio_cccr)); @@ -140,12 +141,60 @@ static int sdio_read_cccr(struct mmc_card *card) } if (cccr_vsn >= SDIO_CCCR_REV_1_20) { - ret = mmc_io_rw_direct(card, 0, 0, SDIO_CCCR_SPEED, 0, &data); + ret = mmc_io_rw_direct(card, 0, 0, SDIO_CCCR_SPEED, 0, &speed); if (ret) goto out; - if (data & SDIO_SPEED_SHS) - card->cccr.high_speed = 1; + card->scr.sda_spec3 = 0; + card->sw_caps.sd3_bus_mode = 0; + card->sw_caps.sd3_drv_type = 0; + if (cccr_vsn >= SDIO_CCCR_REV_3_00) { + card->scr.sda_spec3 = 1; + ret = mmc_io_rw_direct(card, 0, 0, + SDIO_CCCR_UHS, 0, &data); + if (ret) + goto out; + + if (card->host->caps & + (MMC_CAP_UHS_SDR12 | MMC_CAP_UHS_SDR25 | + MMC_CAP_UHS_SDR50 | MMC_CAP_UHS_SDR104 | + MMC_CAP_UHS_DDR50)) { + if (data & SDIO_UHS_DDR50) + card->sw_caps.sd3_bus_mode + |= SD_MODE_UHS_DDR50; + + if (data & SDIO_UHS_SDR50) + card->sw_caps.sd3_bus_mode + |= SD_MODE_UHS_SDR50; + + if (data & SDIO_UHS_SDR104) + card->sw_caps.sd3_bus_mode + |= SD_MODE_UHS_SDR104; + } + + ret = mmc_io_rw_direct(card, 0, 0, + SDIO_CCCR_DRIVE_STRENGTH, 0, &data); + if (ret) + goto out; + + if (data & SDIO_DRIVE_SDTA) + card->sw_caps.sd3_drv_type |= SD_DRIVER_TYPE_A; + if (data & SDIO_DRIVE_SDTC) + card->sw_caps.sd3_drv_type |= SD_DRIVER_TYPE_C; + if (data & SDIO_DRIVE_SDTD) + card->sw_caps.sd3_drv_type |= SD_DRIVER_TYPE_D; + } + + /* if no uhs mode ensure we check for high speed */ + if (!card->sw_caps.sd3_bus_mode) { + if (speed & SDIO_SPEED_SHS) { + card->cccr.high_speed = 1; + card->sw_caps.hs_max_dtr = 50000000; + } else { + card->cccr.high_speed = 0; + card->sw_caps.hs_max_dtr = 25000000; + } + } } out: @@ -327,6 +376,193 @@ static unsigned mmc_sdio_get_max_clock(struct mmc_card *card) return max_dtr; } +static unsigned char host_drive_to_sdio_drive(int host_strength) +{ + switch (host_strength) { + case MMC_SET_DRIVER_TYPE_A: + return SDIO_DTSx_SET_TYPE_A; + case MMC_SET_DRIVER_TYPE_B: + return SDIO_DTSx_SET_TYPE_B; + case MMC_SET_DRIVER_TYPE_C: + return SDIO_DTSx_SET_TYPE_C; + case MMC_SET_DRIVER_TYPE_D: + return SDIO_DTSx_SET_TYPE_D; + default: + return SDIO_DTSx_SET_TYPE_B; + } +} + +static void sdio_select_driver_type(struct mmc_card *card) +{ + int host_drv_type = SD_DRIVER_TYPE_B; + int card_drv_type = SD_DRIVER_TYPE_B; + int drive_strength; + unsigned char card_strength; + int err; + + /* + * If the host doesn't support any of the Driver Types A,C or D, + * or there is no board specific handler then default Driver + * Type B is used. + */ + if (!(card->host->caps & + (MMC_CAP_DRIVER_TYPE_A | + MMC_CAP_DRIVER_TYPE_C | + MMC_CAP_DRIVER_TYPE_D))) + return; + + if (!card->host->ops->select_drive_strength) + return; + + if (card->host->caps & MMC_CAP_DRIVER_TYPE_A) + host_drv_type |= SD_DRIVER_TYPE_A; + + if (card->host->caps & MMC_CAP_DRIVER_TYPE_C) + host_drv_type |= SD_DRIVER_TYPE_C; + + if (card->host->caps & MMC_CAP_DRIVER_TYPE_D) + host_drv_type |= SD_DRIVER_TYPE_D; + + if (card->sw_caps.sd3_drv_type & SD_DRIVER_TYPE_A) + card_drv_type |= SD_DRIVER_TYPE_A; + + if (card->sw_caps.sd3_drv_type & SD_DRIVER_TYPE_C) + card_drv_type |= SD_DRIVER_TYPE_C; + + if (card->sw_caps.sd3_drv_type & SD_DRIVER_TYPE_D) + card_drv_type |= SD_DRIVER_TYPE_D; + + /* + * The drive strength that the hardware can support + * depends on the board design. Pass the appropriate + * information and let the hardware specific code + * return what is possible given the options + */ + drive_strength = card->host->ops->select_drive_strength( + card->sw_caps.uhs_max_dtr, + host_drv_type, card_drv_type); + + /* if error just use default for drive strength B */ + err = mmc_io_rw_direct(card, 0, 0, SDIO_CCCR_DRIVE_STRENGTH, 0, + &card_strength); + if (err) + return; + + card_strength &= ~(SDIO_DRIVE_DTSx_MASK<<SDIO_DRIVE_DTSx_SHIFT); + card_strength |= host_drive_to_sdio_drive(drive_strength); + + err = mmc_io_rw_direct(card, 1, 0, SDIO_CCCR_DRIVE_STRENGTH, + card_strength, NULL); + + /* if error default to drive strength B */ + if (!err) + mmc_set_driver_type(card->host, drive_strength); +} + + +static int sdio_set_bus_speed_mode(struct mmc_card *card) +{ + unsigned int bus_speed, timing; + int err; + unsigned char speed; + + /* + * If the host doesn't support any of the UHS-I modes, fallback on + * default speed. + */ + if (!(card->host->caps & (MMC_CAP_UHS_SDR12 | MMC_CAP_UHS_SDR25 | + MMC_CAP_UHS_SDR50 | MMC_CAP_UHS_SDR104 | MMC_CAP_UHS_DDR50))) + return 0; + + bus_speed = SDIO_SPEED_SDR12; + timing = MMC_TIMING_UHS_SDR12; + if ((card->host->caps & MMC_CAP_UHS_SDR104) && + (card->sw_caps.sd3_bus_mode & SD_MODE_UHS_SDR104)) { + bus_speed = SDIO_SPEED_SDR104; + timing = MMC_TIMING_UHS_SDR104; + card->sw_caps.uhs_max_dtr = UHS_SDR104_MAX_DTR; + } else if ((card->host->caps & MMC_CAP_UHS_DDR50) && + (card->sw_caps.sd3_bus_mode & SD_MODE_UHS_DDR50)) { + bus_speed = SDIO_SPEED_DDR50; + timing = MMC_TIMING_UHS_DDR50; + card->sw_caps.uhs_max_dtr = UHS_DDR50_MAX_DTR; + } else if ((card->host->caps & (MMC_CAP_UHS_SDR104 | + MMC_CAP_UHS_SDR50)) && (card->sw_caps.sd3_bus_mode & + SD_MODE_UHS_SDR50)) { + bus_speed = SDIO_SPEED_SDR50; + timing = MMC_TIMING_UHS_SDR50; + card->sw_caps.uhs_max_dtr = UHS_SDR50_MAX_DTR; + } else if ((card->host->caps & (MMC_CAP_UHS_SDR104 | + MMC_CAP_UHS_SDR50 | MMC_CAP_UHS_SDR25)) && + (card->sw_caps.sd3_bus_mode & SD_MODE_UHS_SDR25)) { + bus_speed = SDIO_SPEED_SDR25; + timing = MMC_TIMING_UHS_SDR25; + card->sw_caps.uhs_max_dtr = UHS_SDR25_MAX_DTR; + } else if ((card->host->caps & (MMC_CAP_UHS_SDR104 | + MMC_CAP_UHS_SDR50 | MMC_CAP_UHS_SDR25 | + MMC_CAP_UHS_SDR12)) && (card->sw_caps.sd3_bus_mode & + SD_MODE_UHS_SDR12)) { + bus_speed = SDIO_SPEED_SDR12; + timing = MMC_TIMING_UHS_SDR12; + card->sw_caps.uhs_max_dtr = UHS_SDR12_MAX_DTR; + } + + err = mmc_io_rw_direct(card, 0, 0, SDIO_CCCR_SPEED, 0, &speed); + if (err) + return err; + + speed &= ~SDIO_SPEED_BSS_MASK; + speed |= bus_speed; + err = mmc_io_rw_direct(card, 1, 0, SDIO_CCCR_SPEED, speed, NULL); + if (err) + return err; + + if (bus_speed) { + mmc_set_timing(card->host, timing); + mmc_set_clock(card->host, card->sw_caps.uhs_max_dtr); + } + + return 0; +} + +/* + * UHS-I specific initialization procedure + */ +static int mmc_sdio_init_uhs_card(struct mmc_card *card) +{ + int err; + + if (!card->scr.sda_spec3) + return 0; + + /* + * Switch to wider bus (if supported). + */ + if (card->host->caps & MMC_CAP_4_BIT_DATA) { + err = sdio_enable_4bit_bus(card); + if (err > 0) { + mmc_set_bus_width(card->host, MMC_BUS_WIDTH_4); + err = 0; + } + } + + /* Set the driver strength for the card */ + sdio_select_driver_type(card); + + /* Set bus speed mode of the card */ + err = sdio_set_bus_speed_mode(card); + if (err) + goto out; + + /* Initialize and start re-tuning timer */ + if (!mmc_host_is_spi(card->host) && card->host->ops->execute_tuning) + err = card->host->ops->execute_tuning(card->host); + +out: + + return err; +} + /* * Handle the detection and initialisation of a card. * @@ -394,6 +630,30 @@ static int mmc_sdio_init_card(struct mmc_host *host, u32 ocr, host->ops->init_card(host, card); /* + * If the host and card support UHS-I mode request the card + * to switch to 1.8V signaling level. No 1.8v signalling if + * UHS mode is not enabled to maintain compatibilty and some + * systems that claim 1.8v signalling in fact do not support + * it. + */ + if ((ocr & R4_18V_PRESENT) && + (host->caps & + (MMC_CAP_UHS_SDR12 | MMC_CAP_UHS_SDR25 | + MMC_CAP_UHS_SDR50 | MMC_CAP_UHS_SDR104 | + MMC_CAP_UHS_DDR50))) { + err = mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_180, + true); + if (err) { + ocr &= ~R4_18V_PRESENT; + host->ocr &= ~R4_18V_PRESENT; + } + err = 0; + } else { + ocr &= ~R4_18V_PRESENT; + host->ocr &= ~R4_18V_PRESENT; + } + + /* * For native busses: set card RCA and quit open drain mode. */ if (!powered_resume && !mmc_host_is_spi(host)) { @@ -492,29 +752,39 @@ static int mmc_sdio_init_card(struct mmc_host *host, u32 ocr, if (err) goto remove; - /* - * Switch to high-speed (if supported). - */ - err = sdio_enable_hs(card); - if (err > 0) - mmc_sd_go_highspeed(card); - else if (err) - goto remove; + /* Initialization sequence for UHS-I cards */ + /* Only if card supports 1.8v and UHS signaling */ + if ((ocr & R4_18V_PRESENT) && card->sw_caps.sd3_bus_mode) { + err = mmc_sdio_init_uhs_card(card); + if (err) + goto remove; - /* - * Change to the card's maximum speed. - */ - mmc_set_clock(host, mmc_sdio_get_max_clock(card)); + /* Card is an ultra-high-speed card */ + mmc_card_set_uhs(card); + } else { + /* + * Switch to high-speed (if supported). + */ + err = sdio_enable_hs(card); + if (err > 0) + mmc_sd_go_highspeed(card); + else if (err) + goto remove; - /* - * Switch to wider bus (if supported). - */ - err = sdio_enable_4bit_bus(card); - if (err > 0) - mmc_set_bus_width(card->host, MMC_BUS_WIDTH_4); - else if (err) - goto remove; + /* + * Change to the card's maximum speed. + */ + mmc_set_clock(host, mmc_sdio_get_max_clock(card)); + /* + * Switch to wider bus (if supported). + */ + err = sdio_enable_4bit_bus(card); + if (err > 0) + mmc_set_bus_width(card->host, MMC_BUS_WIDTH_4); + else if (err) + goto remove; + } finish: if (!oldcard) host->card = card; @@ -797,8 +1067,17 @@ int mmc_attach_sdio(struct mmc_host *host) * Detect and init the card. */ err = mmc_sdio_init_card(host, host->ocr, NULL, 0); - if (err) - goto err; + if (err) { + if (err == -EAGAIN) { + /* + * Retry initialization with S18R set to 0. + */ + host->ocr &= ~R4_18V_PRESENT; + err = mmc_sdio_init_card(host, host->ocr, NULL, 0); + } + if (err) + goto err; + } card = host->card; /* diff --git a/include/linux/mmc/card.h b/include/linux/mmc/card.h index 2c9be29684c..534974c3ef0 100644 --- a/include/linux/mmc/card.h +++ b/include/linux/mmc/card.h @@ -367,7 +367,8 @@ static inline void __maybe_unused remove_quirk(struct mmc_card *card, int data) #define mmc_card_highspeed(c) ((c)->state & MMC_STATE_HIGHSPEED) #define mmc_card_blockaddr(c) ((c)->state & MMC_STATE_BLOCKADDR) #define mmc_card_ddr_mode(c) ((c)->state & MMC_STATE_HIGHSPEED_DDR) -#define mmc_sd_card_uhs(c) ((c)->state & MMC_STATE_ULTRAHIGHSPEED) +#define mmc_card_uhs(c) ((c)->state & MMC_STATE_ULTRAHIGHSPEED) +#define mmc_sd_card_uhs(c) ((c)->state & MMC_STATE_ULTRAHIGHSPEED) #define mmc_card_ext_capacity(c) ((c)->state & MMC_CARD_SDXC) #define mmc_card_set_present(c) ((c)->state |= MMC_STATE_PRESENT) @@ -375,6 +376,7 @@ static inline void __maybe_unused remove_quirk(struct mmc_card *card, int data) #define mmc_card_set_highspeed(c) ((c)->state |= MMC_STATE_HIGHSPEED) #define mmc_card_set_blockaddr(c) ((c)->state |= MMC_STATE_BLOCKADDR) #define mmc_card_set_ddr_mode(c) ((c)->state |= MMC_STATE_HIGHSPEED_DDR) +#define mmc_card_set_uhs(c) ((c)->state |= MMC_STATE_ULTRAHIGHSPEED) #define mmc_sd_card_set_uhs(c) ((c)->state |= MMC_STATE_ULTRAHIGHSPEED) #define mmc_card_set_ext_capacity(c) ((c)->state |= MMC_CARD_SDXC) diff --git a/include/linux/mmc/sdio.h b/include/linux/mmc/sdio.h index e0b1123497b..c9fe66c58f8 100644 --- a/include/linux/mmc/sdio.h +++ b/include/linux/mmc/sdio.h @@ -38,6 +38,7 @@ * [8:0] Byte/block count */ +#define R4_18V_PRESENT (1<<24) #define R4_MEMORY_PRESENT (1 << 27) /* @@ -85,6 +86,7 @@ #define SDIO_SD_REV_1_01 0 /* SD Physical Spec Version 1.01 */ #define SDIO_SD_REV_1_10 1 /* SD Physical Spec Version 1.10 */ #define SDIO_SD_REV_2_00 2 /* SD Physical Spec Version 2.00 */ +#define SDIO_SD_REV_3_00 3 /* SD Physical Spev Version 3.00 */ #define SDIO_CCCR_IOEx 0x02 #define SDIO_CCCR_IORx 0x03 @@ -134,8 +136,31 @@ #define SDIO_CCCR_SPEED 0x13 #define SDIO_SPEED_SHS 0x01 /* Supports High-Speed mode */ -#define SDIO_SPEED_EHS 0x02 /* Enable High-Speed mode */ - +#define SDIO_SPEED_BSS_SHIFT 1 +#define SDIO_SPEED_BSS_MASK (7<<SDIO_SPEED_BSS_SHIFT) +#define SDIO_SPEED_SDR12 (0<<SDIO_SPEED_BSS_SHIFT) +#define SDIO_SPEED_SDR25 (1<<SDIO_SPEED_BSS_SHIFT) +#define SDIO_SPEED_SDR50 (2<<SDIO_SPEED_BSS_SHIFT) +#define SDIO_SPEED_SDR104 (3<<SDIO_SPEED_BSS_SHIFT) +#define SDIO_SPEED_DDR50 (4<<SDIO_SPEED_BSS_SHIFT) +#define SDIO_SPEED_EHS SDIO_SPEED_SDR25 /* Enable High-Speed */ + +#define SDIO_CCCR_UHS 0x14 +#define SDIO_UHS_SDR50 0x01 +#define SDIO_UHS_SDR104 0x02 +#define SDIO_UHS_DDR50 0x04 + +#define SDIO_CCCR_DRIVE_STRENGTH 0x15 +#define SDIO_SDTx_MASK 0x07 +#define SDIO_DRIVE_SDTA (1<<0) +#define SDIO_DRIVE_SDTC (1<<1) +#define SDIO_DRIVE_SDTD (1<<2) +#define SDIO_DRIVE_DTSx_MASK 0x03 +#define SDIO_DRIVE_DTSx_SHIFT 4 +#define SDIO_DTSx_SET_TYPE_B (0 << SDIO_DRIVE_DTSx_SHIFT) +#define SDIO_DTSx_SET_TYPE_A (1 << SDIO_DRIVE_DTSx_SHIFT) +#define SDIO_DTSx_SET_TYPE_C (2 << SDIO_DRIVE_DTSx_SHIFT) +#define SDIO_DTSx_SET_TYPE_D (3 << SDIO_DRIVE_DTSx_SHIFT) /* * Function Basic Registers (FBR) */ |