diff options
53 files changed, 161 insertions, 165 deletions
diff --git a/arch/arm/mach-omap1/Makefile b/arch/arm/mach-omap1/Makefile index 9923f92b545..398e9e53e18 100644 --- a/arch/arm/mach-omap1/Makefile +++ b/arch/arm/mach-omap1/Makefile @@ -12,6 +12,9 @@ endif obj-$(CONFIG_OMAP_32K_TIMER) += timer32k.o +# OCPI interconnect support for 1710, 1610 and 5912 +obj-$(CONFIG_ARCH_OMAP16XX) += ocpi.o + # Power Management obj-$(CONFIG_PM) += pm.o sleep.o @@ -28,13 +31,15 @@ usb-fs-$(CONFIG_USB) := usb.o obj-y += $(usb-fs-m) $(usb-fs-y) # Specific board support -obj-$(CONFIG_MACH_OMAP_H2) += board-h2.o board-h2-mmc.o +obj-$(CONFIG_MACH_OMAP_H2) += board-h2.o board-h2-mmc.o \ + board-nand.o obj-$(CONFIG_MACH_OMAP_INNOVATOR) += board-innovator.o obj-$(CONFIG_MACH_OMAP_GENERIC) += board-generic.o -obj-$(CONFIG_MACH_OMAP_PERSEUS2) += board-perseus2.o -obj-$(CONFIG_MACH_OMAP_FSAMPLE) += board-fsample.o +obj-$(CONFIG_MACH_OMAP_PERSEUS2) += board-perseus2.o board-nand.o +obj-$(CONFIG_MACH_OMAP_FSAMPLE) += board-fsample.o board-nand.o obj-$(CONFIG_MACH_OMAP_OSK) += board-osk.o -obj-$(CONFIG_MACH_OMAP_H3) += board-h3.o board-h3-mmc.o +obj-$(CONFIG_MACH_OMAP_H3) += board-h3.o board-h3-mmc.o \ + board-nand.o obj-$(CONFIG_MACH_VOICEBLUE) += board-voiceblue.o obj-$(CONFIG_MACH_OMAP_PALMTE) += board-palmte.o obj-$(CONFIG_MACH_OMAP_PALMZ71) += board-palmz71.o diff --git a/arch/arm/mach-omap1/ams-delta-fiq.c b/arch/arm/mach-omap1/ams-delta-fiq.c index fcce7ff3763..31197bd2ded 100644 --- a/arch/arm/mach-omap1/ams-delta-fiq.c +++ b/arch/arm/mach-omap1/ams-delta-fiq.c @@ -102,7 +102,7 @@ void __init ams_delta_init_fiq(void) } retval = request_irq(INT_DEFERRED_FIQ, deferred_fiq, - IRQ_TYPE_EDGE_RISING, "deferred_fiq", 0); + IRQ_TYPE_EDGE_RISING, "deferred_fiq", NULL); if (retval < 0) { pr_err("Failed to get deferred_fiq IRQ, ret=%d\n", retval); release_fiq(&fh); diff --git a/arch/arm/mach-omap1/board-fsample.c b/arch/arm/mach-omap1/board-fsample.c index 80bd43c7f4e..4a4afb37102 100644 --- a/arch/arm/mach-omap1/board-fsample.c +++ b/arch/arm/mach-omap1/board-fsample.c @@ -185,20 +185,6 @@ static struct platform_device nor_device = { .resource = &nor_resource, }; -static void nand_cmd_ctl(struct mtd_info *mtd, int cmd, unsigned int ctrl) -{ - struct nand_chip *this = mtd->priv; - unsigned long mask; - - if (cmd == NAND_CMD_NONE) - return; - - mask = (ctrl & NAND_CLE) ? 0x02 : 0; - if (ctrl & NAND_ALE) - mask |= 0x04; - writeb(cmd, (unsigned long)this->IO_ADDR_W | mask); -} - #define FSAMPLE_NAND_RB_GPIO_PIN 62 static int nand_dev_ready(struct mtd_info *mtd) @@ -216,7 +202,7 @@ static struct platform_nand_data nand_data = { .part_probe_types = part_probes, }, .ctrl = { - .cmd_ctrl = nand_cmd_ctl, + .cmd_ctrl = omap1_nand_cmd_ctl, .dev_ready = nand_dev_ready, }, }; diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c index 553a2e53576..057ec13f064 100644 --- a/arch/arm/mach-omap1/board-h2.c +++ b/arch/arm/mach-omap1/board-h2.c @@ -179,20 +179,6 @@ static struct mtd_partition h2_nand_partitions[] = { }, }; -static void h2_nand_cmd_ctl(struct mtd_info *mtd, int cmd, unsigned int ctrl) -{ - struct nand_chip *this = mtd->priv; - unsigned long mask; - - if (cmd == NAND_CMD_NONE) - return; - - mask = (ctrl & NAND_CLE) ? 0x02 : 0; - if (ctrl & NAND_ALE) - mask |= 0x04; - writeb(cmd, (unsigned long)this->IO_ADDR_W | mask); -} - #define H2_NAND_RB_GPIO_PIN 62 static int h2_nand_dev_ready(struct mtd_info *mtd) @@ -212,9 +198,8 @@ static struct platform_nand_data h2_nand_platdata = { .part_probe_types = h2_part_probes, }, .ctrl = { - .cmd_ctrl = h2_nand_cmd_ctl, + .cmd_ctrl = omap1_nand_cmd_ctl, .dev_ready = h2_nand_dev_ready, - }, }; diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c index 4c19f4c0685..f6ddf875965 100644 --- a/arch/arm/mach-omap1/board-h3.c +++ b/arch/arm/mach-omap1/board-h3.c @@ -181,20 +181,6 @@ static struct mtd_partition nand_partitions[] = { }, }; -static void nand_cmd_ctl(struct mtd_info *mtd, int cmd, unsigned int ctrl) -{ - struct nand_chip *this = mtd->priv; - unsigned long mask; - - if (cmd == NAND_CMD_NONE) - return; - - mask = (ctrl & NAND_CLE) ? 0x02 : 0; - if (ctrl & NAND_ALE) - mask |= 0x04; - writeb(cmd, (unsigned long)this->IO_ADDR_W | mask); -} - #define H3_NAND_RB_GPIO_PIN 10 static int nand_dev_ready(struct mtd_info *mtd) @@ -214,7 +200,7 @@ static struct platform_nand_data nand_platdata = { .part_probe_types = part_probes, }, .ctrl = { - .cmd_ctrl = nand_cmd_ctl, + .cmd_ctrl = omap1_nand_cmd_ctl, .dev_ready = nand_dev_ready, }, diff --git a/arch/arm/mach-omap1/board-nand.c b/arch/arm/mach-omap1/board-nand.c new file mode 100644 index 00000000000..4d0835327d2 --- /dev/null +++ b/arch/arm/mach-omap1/board-nand.c @@ -0,0 +1,37 @@ +/* + * linux/arch/arm/mach-omap1/board-nand.c + * + * Common OMAP1 board NAND code + * + * Copyright (C) 2004, 2012 Texas Instruments, Inc. + * Copyright (C) 2002 MontaVista Software, Inc. + * Copyright (C) 2001 RidgeRun, Inc. + * Author: RidgeRun, Inc. + * Greg Lonnon (glonnon@ridgerun.com) or info@ridgerun.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/kernel.h> +#include <linux/io.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/nand.h> + +#include "common.h" + +void omap1_nand_cmd_ctl(struct mtd_info *mtd, int cmd, unsigned int ctrl) +{ + struct nand_chip *this = mtd->priv; + unsigned long mask; + + if (cmd == NAND_CMD_NONE) + return; + + mask = (ctrl & NAND_CLE) ? 0x02 : 0; + if (ctrl & NAND_ALE) + mask |= 0x04; + + writeb(cmd, this->IO_ADDR_W + mask); +} + diff --git a/arch/arm/mach-omap1/board-palmz71.c b/arch/arm/mach-omap1/board-palmz71.c index a2c5abcd7c8..61ed4f0247c 100644 --- a/arch/arm/mach-omap1/board-palmz71.c +++ b/arch/arm/mach-omap1/board-palmz71.c @@ -289,10 +289,10 @@ palmz71_gpio_setup(int early) gpio_direction_input(PALMZ71_USBDETECT_GPIO); if (request_irq(gpio_to_irq(PALMZ71_USBDETECT_GPIO), palmz71_powercable, IRQF_SAMPLE_RANDOM, - "palmz71-cable", 0)) + "palmz71-cable", NULL)) printk(KERN_ERR "IRQ request for power cable failed!\n"); - palmz71_powercable(gpio_to_irq(PALMZ71_USBDETECT_GPIO), 0); + palmz71_powercable(gpio_to_irq(PALMZ71_USBDETECT_GPIO), NULL); } } diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c index 76d4ee05a81..a2c88890e76 100644 --- a/arch/arm/mach-omap1/board-perseus2.c +++ b/arch/arm/mach-omap1/board-perseus2.c @@ -143,20 +143,6 @@ static struct platform_device nor_device = { .resource = &nor_resource, }; -static void nand_cmd_ctl(struct mtd_info *mtd, int cmd, unsigned int ctrl) -{ - struct nand_chip *this = mtd->priv; - unsigned long mask; - - if (cmd == NAND_CMD_NONE) - return; - - mask = (ctrl & NAND_CLE) ? 0x02 : 0; - if (ctrl & NAND_ALE) - mask |= 0x04; - writeb(cmd, (unsigned long)this->IO_ADDR_W | mask); -} - #define P2_NAND_RB_GPIO_PIN 62 static int nand_dev_ready(struct mtd_info *mtd) @@ -174,7 +160,7 @@ static struct platform_nand_data nand_data = { .part_probe_types = part_probes, }, .ctrl = { - .cmd_ctrl = nand_cmd_ctl, + .cmd_ctrl = omap1_nand_cmd_ctl, .dev_ready = nand_dev_ready, }, }; diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c index 67382ddd8c8..a9ee06b6cb4 100644 --- a/arch/arm/mach-omap1/clock.c +++ b/arch/arm/mach-omap1/clock.c @@ -194,9 +194,8 @@ int omap1_select_table_rate(struct clk *clk, unsigned long rate) { /* Find the highest supported frequency <= rate and switch to it */ struct mpu_rate * ptr; - unsigned long dpll1_rate, ref_rate; + unsigned long ref_rate; - dpll1_rate = ck_dpll1_p->rate; ref_rate = ck_ref_p->rate; for (ptr = omap1_rate_table; ptr->rate; ptr++) { diff --git a/arch/arm/mach-omap1/common.h b/arch/arm/mach-omap1/common.h index af658ad338e..8cc616e6f54 100644 --- a/arch/arm/mach-omap1/common.h +++ b/arch/arm/mach-omap1/common.h @@ -27,6 +27,7 @@ #define __ARCH_ARM_MACH_OMAP1_COMMON_H #include <plat/common.h> +#include <linux/mtd/mtd.h> #if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) void omap7xx_map_io(void); @@ -56,8 +57,16 @@ void omap1_init_early(void); void omap1_init_irq(void); void omap1_restart(char, const char *); +extern void __init omap_check_revision(void); + +extern void omap1_nand_cmd_ctl(struct mtd_info *mtd, int cmd, + unsigned int ctrl); + extern struct sys_timer omap1_timer; extern bool omap_32k_timer_init(void); -extern void __init omap_init_consistent_dma_size(void); + +extern u32 omap_irq_flags; + +extern int ocpi_enable(void); #endif /* __ARCH_ARM_MACH_OMAP1_COMMON_H */ diff --git a/arch/arm/mach-omap1/fpga.c b/arch/arm/mach-omap1/fpga.c index 76c67b3f9f6..29ec50fc688 100644 --- a/arch/arm/mach-omap1/fpga.c +++ b/arch/arm/mach-omap1/fpga.c @@ -87,7 +87,7 @@ static void fpga_mask_ack_irq(struct irq_data *d) fpga_ack_irq(d); } -void innovator_fpga_IRQ_demux(unsigned int irq, struct irq_desc *desc) +static void innovator_fpga_IRQ_demux(unsigned int irq, struct irq_desc *desc) { u32 stat; int fpga_irq; diff --git a/arch/arm/mach-omap1/id.c b/arch/arm/mach-omap1/id.c index 2b28e1da14b..a1b846aacda 100644 --- a/arch/arm/mach-omap1/id.c +++ b/arch/arm/mach-omap1/id.c @@ -21,6 +21,8 @@ #include <mach/hardware.h> +#include "common.h" + #define OMAP_DIE_ID_0 0xfffe1800 #define OMAP_DIE_ID_1 0xfffe1804 #define OMAP_PRODUCTION_ID_0 0xfffe2000 diff --git a/arch/arm/mach-omap1/io.c b/arch/arm/mach-omap1/io.c index d969a7203d1..71ce017bf5d 100644 --- a/arch/arm/mach-omap1/io.c +++ b/arch/arm/mach-omap1/io.c @@ -18,13 +18,12 @@ #include <plat/mux.h> #include <plat/tc.h> +#include <plat/dma.h> #include "iomap.h" #include "common.h" #include "clock.h" -extern void omap_check_revision(void); - /* * The machine specific code may provide the extra mapping besides the * default mapping provided here. diff --git a/arch/arm/mach-omap1/irq.c b/arch/arm/mach-omap1/irq.c index 4448114fab7..6995fb6a334 100644 --- a/arch/arm/mach-omap1/irq.c +++ b/arch/arm/mach-omap1/irq.c @@ -49,6 +49,8 @@ #include <mach/hardware.h> +#include "common.h" + #define IRQ_BANK(irq) ((irq) >> 5) #define IRQ_BIT(irq) ((irq) & 0x1f) diff --git a/arch/arm/mach-omap1/lcd_dma.c b/arch/arm/mach-omap1/lcd_dma.c index 86ace9aaa66..5769c71815b 100644 --- a/arch/arm/mach-omap1/lcd_dma.c +++ b/arch/arm/mach-omap1/lcd_dma.c @@ -57,7 +57,7 @@ static struct lcd_dma_info { void *cb_data; int active; - unsigned long addr, size; + unsigned long addr; int rotate, data_type, xres, yres; int vxres; int mirror; @@ -77,11 +77,6 @@ void omap_set_lcd_dma_b1(unsigned long addr, u16 fb_xres, u16 fb_yres, } EXPORT_SYMBOL(omap_set_lcd_dma_b1); -void omap_set_lcd_dma_src_port(int port) -{ - lcd_dma.src_port = port; -} - void omap_set_lcd_dma_ext_controller(int external) { lcd_dma.ext_ctrl = external; diff --git a/arch/arm/plat-omap/ocpi.c b/arch/arm/mach-omap1/ocpi.c index ebe0c73c890..238170cab5b 100644 --- a/arch/arm/plat-omap/ocpi.c +++ b/arch/arm/mach-omap1/ocpi.c @@ -4,6 +4,7 @@ * Minimal OCP bus support for omap16xx * * Copyright (C) 2003 - 2005 Nokia Corporation + * Copyright (C) 2012 Texas Instruments, Inc. * Written by Tony Lindgren <tony@atomide.com> * * Modified for clock framework by Paul Mundt <paul.mundt@nokia.com>. @@ -35,6 +36,8 @@ #include <mach/hardware.h> +#include "common.h" + #define OCPI_BASE 0xfffec320 #define OCPI_FAULT (OCPI_BASE + 0x00) #define OCPI_CMD_FAULT (OCPI_BASE + 0x04) @@ -64,7 +67,7 @@ int ocpi_enable(void) /* Enable access for OHCI in OCPI */ val = omap_readl(OCPI_PROT); val &= ~0xff; - //val &= (1 << 0); /* Allow access only to EMIFS */ + /* val &= (1 << 0); Allow access only to EMIFS */ omap_writel(val, OCPI_PROT); val = omap_readl(OCPI_SEC); @@ -86,7 +89,7 @@ static int __init omap_ocpi_init(void) clk_enable(ocpi_ck); ocpi_enable(); - printk("OMAP OCPI interconnect driver loaded\n"); + pr_info("OMAP OCPI interconnect driver loaded\n"); return 0; } diff --git a/arch/arm/mach-omap1/pm.c b/arch/arm/mach-omap1/pm.c index f66c32912b2..b2560d32b3a 100644 --- a/arch/arm/mach-omap1/pm.c +++ b/arch/arm/mach-omap1/pm.c @@ -569,11 +569,10 @@ static int omap_pm_read_proc( static void omap_pm_init_proc(void) { - struct proc_dir_entry *entry; - - entry = create_proc_read_entry("driver/omap_pm", - S_IWUSR | S_IRUGO, NULL, - omap_pm_read_proc, NULL); + /* XXX Appears to leak memory */ + create_proc_read_entry("driver/omap_pm", + S_IWUSR | S_IRUGO, NULL, + omap_pm_read_proc, NULL); } #endif /* DEBUG && CONFIG_PROC_FS */ diff --git a/arch/arm/mach-omap1/reset.c b/arch/arm/mach-omap1/reset.c index f255b153b86..b1770910386 100644 --- a/arch/arm/mach-omap1/reset.c +++ b/arch/arm/mach-omap1/reset.c @@ -8,6 +8,8 @@ #include <mach/hardware.h> +#include "common.h" + void omap1_restart(char mode, const char *cmd) { /* diff --git a/arch/arm/mach-omap1/timer.c b/arch/arm/mach-omap1/timer.c index fb202af01d0..64c65bcb2d6 100644 --- a/arch/arm/mach-omap1/timer.c +++ b/arch/arm/mach-omap1/timer.c @@ -54,8 +54,7 @@ static int omap1_dm_timer_set_src(struct platform_device *pdev, return 0; } - -int __init omap1_dm_timer_init(void) +static int __init omap1_dm_timer_init(void) { int i; int ret; diff --git a/arch/arm/mach-omap1/usb.c b/arch/arm/mach-omap1/usb.c index 19de03b074e..e61afd92276 100644 --- a/arch/arm/mach-omap1/usb.c +++ b/arch/arm/mach-omap1/usb.c @@ -29,6 +29,8 @@ #include <plat/mux.h> #include <plat/usb.h> +#include "common.h" + /* These routines should handle the standard chip-specific modes * for usb0/1/2 ports, covering basic mux and transceiver setup. * @@ -138,6 +140,7 @@ static inline void ohci_device_init(struct omap_usb_config *pdata) if (cpu_is_omap7xx()) ohci_resources[1].start = INT_7XX_USB_HHC_1; pdata->ohci_device = &ohci_device; + pdata->ocpi_enable = &ocpi_enable; } #else diff --git a/arch/arm/mach-omap2/am35xx-emac.c b/arch/arm/mach-omap2/am35xx-emac.c index 1f97e747520..447682c4e11 100644 --- a/arch/arm/mach-omap2/am35xx-emac.c +++ b/arch/arm/mach-omap2/am35xx-emac.c @@ -39,26 +39,23 @@ static struct platform_device am35xx_emac_mdio_device = { static void am35xx_enable_emac_int(void) { - u32 regval; - - regval = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR); - regval = (regval | AM35XX_CPGMAC_C0_RX_PULSE_CLR | - AM35XX_CPGMAC_C0_TX_PULSE_CLR | - AM35XX_CPGMAC_C0_MISC_PULSE_CLR | - AM35XX_CPGMAC_C0_RX_THRESH_CLR); - omap_ctrl_writel(regval, AM35XX_CONTROL_LVL_INTR_CLEAR); - regval = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR); + u32 v; + + v = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR); + v |= (AM35XX_CPGMAC_C0_RX_PULSE_CLR | AM35XX_CPGMAC_C0_TX_PULSE_CLR | + AM35XX_CPGMAC_C0_MISC_PULSE_CLR | AM35XX_CPGMAC_C0_RX_THRESH_CLR); + omap_ctrl_writel(v, AM35XX_CONTROL_LVL_INTR_CLEAR); + omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR); /* OCP barrier */ } static void am35xx_disable_emac_int(void) { - u32 regval; + u32 v; - regval = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR); - regval = (regval | AM35XX_CPGMAC_C0_RX_PULSE_CLR | - AM35XX_CPGMAC_C0_TX_PULSE_CLR); - omap_ctrl_writel(regval, AM35XX_CONTROL_LVL_INTR_CLEAR); - regval = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR); + v = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR); + v |= (AM35XX_CPGMAC_C0_RX_PULSE_CLR | AM35XX_CPGMAC_C0_TX_PULSE_CLR); + omap_ctrl_writel(v, AM35XX_CONTROL_LVL_INTR_CLEAR); + omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR); /* OCP barrier */ } static struct emac_platform_data am35xx_emac_pdata = { @@ -92,7 +89,7 @@ static struct platform_device am35xx_emac_device = { void __init am35xx_emac_init(unsigned long mdio_bus_freq, u8 rmii_en) { - unsigned int regval; + u32 v; int err; am35xx_emac_pdata.rmii_en = rmii_en; @@ -110,8 +107,8 @@ void __init am35xx_emac_init(unsigned long mdio_bus_freq, u8 rmii_en) return; } - regval = omap_ctrl_readl(AM35XX_CONTROL_IP_SW_RESET); - regval = regval & (~(AM35XX_CPGMACSS_SW_RST)); - omap_ctrl_writel(regval, AM35XX_CONTROL_IP_SW_RESET); - regval = omap_ctrl_readl(AM35XX_CONTROL_IP_SW_RESET); + v = omap_ctrl_readl(AM35XX_CONTROL_IP_SW_RESET); + v &= ~AM35XX_CPGMACSS_SW_RST; + omap_ctrl_writel(v, AM35XX_CONTROL_IP_SW_RESET); + omap_ctrl_readl(AM35XX_CONTROL_IP_SW_RESET); /* OCP barrier */ } diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c index 49df12735b4..fd1b481c762 100644 --- a/arch/arm/mach-omap2/board-omap3evm.c +++ b/arch/arm/mach-omap2/board-omap3evm.c @@ -630,13 +630,13 @@ static struct regulator_consumer_supply dummy_supplies[] = { static void __init omap3_evm_init(void) { + struct omap_board_mux *obm; + omap3_evm_get_revision(); regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies)); - if (cpu_is_omap3630()) - omap3_mux_init(omap36x_board_mux, OMAP_PACKAGE_CBB); - else - omap3_mux_init(omap35x_board_mux, OMAP_PACKAGE_CBB); + obm = (cpu_is_omap3630()) ? omap36x_board_mux : omap35x_board_mux; + omap3_mux_init(obm, OMAP_PACKAGE_CBB); omap_board_config = omap3_evm_config; omap_board_config_size = ARRAY_SIZE(omap3_evm_config); diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c index 1b782ba5343..8216e5f64a6 100644 --- a/arch/arm/mach-omap2/board-omap4panda.c +++ b/arch/arm/mach-omap2/board-omap4panda.c @@ -231,7 +231,7 @@ static struct platform_device omap_vwlan_device = { }, }; -struct wl12xx_platform_data omap_panda_wlan_data __initdata = { +static struct wl12xx_platform_data omap_panda_wlan_data __initdata = { /* PANDA ref clock is 38.4 MHz */ .board_ref_clock = 2, }; @@ -438,7 +438,7 @@ static struct panel_dvi_platform_data omap4_dvi_panel = { .i2c_bus_num = 3, }; -struct omap_dss_device omap4_panda_dvi_device = { +static struct omap_dss_device omap4_panda_dvi_device = { .type = OMAP_DISPLAY_TYPE_DPI, .name = "dvi", .driver_name = "dvi", @@ -448,7 +448,7 @@ struct omap_dss_device omap4_panda_dvi_device = { .channel = OMAP_DSS_CHANNEL_LCD2, }; -int __init omap4_panda_dvi_init(void) +static int __init omap4_panda_dvi_init(void) { int r; @@ -509,7 +509,7 @@ static struct omap_dss_board_info omap4_panda_dss_data = { .default_device = &omap4_panda_dvi_device, }; -void __init omap4_panda_display_init(void) +static void __init omap4_panda_display_init(void) { int r; diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c index d87ee061209..ae957c92081 100644 --- a/arch/arm/mach-omap2/board-rx51-peripherals.c +++ b/arch/arm/mach-omap2/board-rx51-peripherals.c @@ -872,11 +872,11 @@ static struct twl4030_power_data rx51_t2scripts_data __initdata = { .resource_config = twl4030_rconfig, }; -struct twl4030_vibra_data rx51_vibra_data __initdata = { +static struct twl4030_vibra_data rx51_vibra_data __initdata = { .coexist = 0, }; -struct twl4030_audio_data rx51_audio_data __initdata = { +static struct twl4030_audio_data rx51_audio_data __initdata = { .audio_mclk = 26000000, .vibra = &rx51_vibra_data, }; diff --git a/arch/arm/mach-omap2/board-zoom-display.c b/arch/arm/mach-omap2/board-zoom-display.c index a43a765dd09..28187f134ff 100644 --- a/arch/arm/mach-omap2/board-zoom-display.c +++ b/arch/arm/mach-omap2/board-zoom-display.c @@ -16,6 +16,7 @@ #include <linux/spi/spi.h> #include <plat/mcspi.h> #include <video/omapdss.h> +#include <mach/board-zoom.h> #define LCD_PANEL_RESET_GPIO_PROD 96 #define LCD_PANEL_RESET_GPIO_PILOT 55 diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h index 57da7f406e2..0e95efccd2d 100644 --- a/arch/arm/mach-omap2/common.h +++ b/arch/arm/mach-omap2/common.h @@ -134,8 +134,6 @@ void omap4_map_io(void); void ti81xx_map_io(void); void omap_barriers_init(void); -extern void __init omap_init_consistent_dma_size(void); - /** * omap_test_timeout - busy-loop, testing a condition * @cond: condition to test until it evaluates to true diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c index e4336035c0e..f3953a49928 100644 --- a/arch/arm/mach-omap2/devices.c +++ b/arch/arm/mach-omap2/devices.c @@ -42,7 +42,6 @@ static int __init omap3_l3_init(void) { - int l; struct omap_hwmod *oh; struct platform_device *pdev; char oh_name[L3_MODULES_MAX_LEN]; @@ -54,7 +53,7 @@ static int __init omap3_l3_init(void) if (!(cpu_is_omap34xx())) return -ENODEV; - l = snprintf(oh_name, L3_MODULES_MAX_LEN, "l3_main"); + snprintf(oh_name, L3_MODULES_MAX_LEN, "l3_main"); oh = omap_hwmod_lookup(oh_name); @@ -72,7 +71,7 @@ postcore_initcall(omap3_l3_init); static int __init omap4_l3_init(void) { - int l, i; + int i; struct omap_hwmod *oh[3]; struct platform_device *pdev; char oh_name[L3_MODULES_MAX_LEN]; @@ -89,7 +88,7 @@ static int __init omap4_l3_init(void) return -ENODEV; for (i = 0; i < L3_MODULES; i++) { - l = snprintf(oh_name, L3_MODULES_MAX_LEN, "l3_main_%d", i+1); + snprintf(oh_name, L3_MODULES_MAX_LEN, "l3_main_%d", i+1); oh[i] = omap_hwmod_lookup(oh_name); if (!(oh[i])) diff --git a/arch/arm/mach-omap2/gpio.c b/arch/arm/mach-omap2/gpio.c index 2f994e5194e..064cab03d2b 100644 --- a/arch/arm/mach-omap2/gpio.c +++ b/arch/arm/mach-omap2/gpio.c @@ -58,7 +58,7 @@ static int __init omap2_gpio_dev_init(struct omap_hwmod *oh, void *unused) pdata->virtual_irq_start = IH_GPIO_BASE + 32 * (id - 1); pdata->get_context_loss_count = omap_pm_get_dev_context_loss_count; pdata->regs = kzalloc(sizeof(struct omap_gpio_reg_offs), GFP_KERNEL); - if (!pdata) { + if (!pdata->regs) { pr_err("gpio%d: Memory allocation failed\n", id); return -ENOMEM; } diff --git a/arch/arm/mach-omap2/gpmc-onenand.c b/arch/arm/mach-omap2/gpmc-onenand.c index 385b3e02c4a..a0fa9bb2bda 100644 --- a/arch/arm/mach-omap2/gpmc-onenand.c +++ b/arch/arm/mach-omap2/gpmc-onenand.c @@ -176,7 +176,7 @@ static int omap2_onenand_set_sync_mode(struct omap_onenand_platform_data *cfg, const int t_wpl = 40; const int t_wph = 30; int min_gpmc_clk_period, t_ces, t_avds, t_avdh, t_ach, t_aavdh, t_rdyo; - int tick_ns, div, fclk_offset_ns, fclk_offset, gpmc_clk_ns, latency; + int div, fclk_offset_ns, fclk_offset, gpmc_clk_ns, latency; int first_time = 0, hf = 0, vhf = 0, sync_read = 0, sync_write = 0; int err, ticks_cez; int cs = cfg->cs, freq = *freq_ptr; @@ -240,7 +240,6 @@ static int omap2_onenand_set_sync_mode(struct omap_onenand_platform_data *cfg, break; } - tick_ns = gpmc_ticks_to_ns(1); div = gpmc_cs_calc_divider(cs, min_gpmc_clk_period); gpmc_clk_ns = gpmc_ticks_to_ns(div); if (gpmc_clk_ns < 15) /* >66Mhz */ diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c index 00d510858e2..580e684e882 100644 --- a/arch/arm/mach-omap2/gpmc.c +++ b/arch/arm/mach-omap2/gpmc.c @@ -755,8 +755,7 @@ static int __init gpmc_init(void) irq++; } - ret = request_irq(gpmc_irq, - gpmc_handle_irq, IRQF_SHARED, "gpmc", gpmc_base); + ret = request_irq(gpmc_irq, gpmc_handle_irq, IRQF_SHARED, "gpmc", NULL); if (ret) pr_err("gpmc: irq-%d could not claim: err %d\n", gpmc_irq, ret); diff --git a/arch/arm/mach-omap2/hwspinlock.c b/arch/arm/mach-omap2/hwspinlock.c index 454dfce125c..8763c8520dc 100644 --- a/arch/arm/mach-omap2/hwspinlock.c +++ b/arch/arm/mach-omap2/hwspinlock.c @@ -28,7 +28,7 @@ static struct hwspinlock_pdata omap_hwspinlock_pdata __initdata = { .base_id = 0, }; -int __init hwspinlocks_init(void) +static int __init hwspinlocks_init(void) { int retval = 0; struct omap_hwmod *oh; diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c index 065bd768987..2d5a57669a7 100644 --- a/arch/arm/mach-omap2/io.c +++ b/arch/arm/mach-omap2/io.c @@ -31,6 +31,7 @@ #include <plat/omap-pm.h> #include <plat/omap_hwmod.h> #include <plat/multi.h> +#include <plat/dma.h> #include "iomap.h" #include "voltage.h" diff --git a/arch/arm/mach-omap2/irq.c b/arch/arm/mach-omap2/irq.c index 65f0d2571c9..80f3ced0bd1 100644 --- a/arch/arm/mach-omap2/irq.c +++ b/arch/arm/mach-omap2/irq.c @@ -25,6 +25,7 @@ #include <mach/hardware.h> #include "iomap.h" +#include "common.h" /* selected INTC register offsets */ @@ -334,7 +335,7 @@ void omap_intc_restore_context(void) void omap3_intc_suspend(void) { /* A pending interrupt would prevent OMAP from entering suspend */ - omap_ack_irq(0); + omap_ack_irq(NULL); } void omap3_intc_prepare_idle(void) diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c index 65c33911341..3268ee24ead 100644 --- a/arch/arm/mach-omap2/mux.c +++ b/arch/arm/mach-omap2/mux.c @@ -247,7 +247,7 @@ int __init omap_mux_init_signal(const char *muxname, int val) int mux_mode; mux_mode = omap_mux_get_by_name(muxname, &partition, &mux); - if (mux_mode < 0) + if (mux_mode < 0 || !mux) return mux_mode; old_mode = omap_mux_read(partition, mux->reg_offset); diff --git a/arch/arm/mach-omap2/omap-secure.c b/arch/arm/mach-omap2/omap-secure.c index d8f8ef40290..d9ae4a53d81 100644 --- a/arch/arm/mach-omap2/omap-secure.c +++ b/arch/arm/mach-omap2/omap-secure.c @@ -18,6 +18,7 @@ #include <asm/cacheflush.h> #include <asm/memblock.h> +#include <plat/omap-secure.h> #include <mach/omap-secure.h> static phys_addr_t omap_secure_memblock_base; diff --git a/arch/arm/mach-omap2/omap-wakeupgen.c b/arch/arm/mach-omap2/omap-wakeupgen.c index 42cd7fb5241..d811c779035 100644 --- a/arch/arm/mach-omap2/omap-wakeupgen.c +++ b/arch/arm/mach-omap2/omap-wakeupgen.c @@ -259,7 +259,7 @@ static void irq_save_context(void) /* * Clear WakeupGen SAR backup status. */ -void irq_sar_clear(void) +static void irq_sar_clear(void) { u32 val; val = __raw_readl(sar_base + SAR_BACKUP_STATUS_OFFSET); diff --git a/arch/arm/mach-omap2/pm24xx.c b/arch/arm/mach-omap2/pm24xx.c index 95442b69ae2..facfffca9ea 100644 --- a/arch/arm/mach-omap2/pm24xx.c +++ b/arch/arm/mach-omap2/pm24xx.c @@ -171,8 +171,6 @@ static int omap2_allow_mpu_retention(void) static void omap2_enter_mpu_retention(void) { - int only_idle = 0; - /* Putting MPU into the WFI state while a transfer is active * seems to cause the I2C block to timeout. Why? Good question. */ if (omap2_i2c_active()) @@ -195,7 +193,6 @@ static void omap2_enter_mpu_retention(void) omap2_prm_write_mod_reg(OMAP_LOGICRETSTATE_MASK, MPU_MOD, OMAP2_PM_PWSTCTRL); - only_idle = 1; } omap2_sram_idle(); diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index 703bd109925..8b43aefba0e 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -273,7 +273,7 @@ void omap_sram_idle(void) int per_next_state = PWRDM_POWER_ON; int core_next_state = PWRDM_POWER_ON; int per_going_off; - int core_prev_state, per_prev_state; + int core_prev_state; u32 sdrc_pwr = 0; mpu_next_state = pwrdm_read_next_pwrst(mpu_pwrdm); @@ -375,10 +375,8 @@ void omap_sram_idle(void) pwrdm_post_transition(); /* PER */ - if (per_next_state < PWRDM_POWER_ON) { - per_prev_state = pwrdm_read_prev_pwrst(per_pwrdm); + if (per_next_state < PWRDM_POWER_ON) omap2_gpio_resume_after_idle(); - } /* Disable IO-PAD and IO-CHAIN wakeup */ if (omap3_has_io_wakeup() && @@ -702,7 +700,7 @@ static void __init pm_errata_configure(void) static int __init omap3_pm_init(void) { struct power_state *pwrst, *tmp; - struct clockdomain *neon_clkdm, *per_clkdm, *mpu_clkdm, *core_clkdm; + struct clockdomain *neon_clkdm, *mpu_clkdm; int ret; if (!cpu_is_omap34xx()) @@ -757,8 +755,6 @@ static int __init omap3_pm_init(void) neon_clkdm = clkdm_lookup("neon_clkdm"); mpu_clkdm = clkdm_lookup("mpu_clkdm"); - per_clkdm = clkdm_lookup("per_clkdm"); - core_clkdm = clkdm_lookup("core_clkdm"); #ifdef CONFIG_SUSPEND omap_pm_suspend = omap3_pm_suspend; diff --git a/arch/arm/mach-omap2/prm_common.c b/arch/arm/mach-omap2/prm_common.c index d28f848897d..dfe00ddb5c6 100644 --- a/arch/arm/mach-omap2/prm_common.c +++ b/arch/arm/mach-omap2/prm_common.c @@ -237,7 +237,7 @@ void omap_prcm_irq_complete(void) */ int omap_prcm_register_chain_handler(struct omap_prcm_irq_setup *irq_setup) { - int nr_regs = irq_setup->nr_regs; + int nr_regs; u32 mask[OMAP_PRCM_MAX_NR_PENDING_REG]; int offset, i; struct irq_chip_generic *gc; @@ -246,6 +246,8 @@ int omap_prcm_register_chain_handler(struct omap_prcm_irq_setup *irq_setup) if (!irq_setup) return -EINVAL; + nr_regs = irq_setup->nr_regs; + if (prcm_irq_setup) { pr_err("PRCM: already initialized; won't reinitialize\n"); return -EINVAL; diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c index 9fc2f44188c..678dd1d612e 100644 --- a/arch/arm/mach-omap2/serial.c +++ b/arch/arm/mach-omap2/serial.c @@ -133,7 +133,7 @@ static void omap_serial_fill_default_pads(struct omap_board_data *bdata) static void omap_serial_fill_default_pads(struct omap_board_data *bdata) {} #endif -char *cmdline_find_option(char *str) +static char *cmdline_find_option(char *str) { extern char *saved_command_line; diff --git a/arch/arm/mach-omap2/usb-tusb6010.c b/arch/arm/mach-omap2/usb-tusb6010.c index 994d8f591a1..db84a46ce7f 100644 --- a/arch/arm/mach-omap2/usb-tusb6010.c +++ b/arch/arm/mach-omap2/usb-tusb6010.c @@ -126,7 +126,7 @@ static int tusb_set_sync_mode(unsigned sysclk_ps, unsigned fclk_ps) tmp = (t.sync_clk + fclk_ps - 1) / fclk_ps; if (tmp > 4) return -ERANGE; - if (tmp <= 0) + if (tmp == 0) tmp = 1; t.page_burst_access = (fclk_ps * tmp) / 1000; diff --git a/arch/arm/plat-omap/Makefile b/arch/arm/plat-omap/Makefile index c0fe2757b69..ed8605f0115 100644 --- a/arch/arm/plat-omap/Makefile +++ b/arch/arm/plat-omap/Makefile @@ -9,9 +9,6 @@ obj-m := obj-n := obj- := -# OCPI interconnect support for 1710, 1610 and 5912 -obj-$(CONFIG_ARCH_OMAP16XX) += ocpi.o - # omap_device support (OMAP2+ only at the moment) obj-$(CONFIG_ARCH_OMAP2) += omap_device.o obj-$(CONFIG_ARCH_OMAP3) += omap_device.o diff --git a/arch/arm/plat-omap/common.c b/arch/arm/plat-omap/common.c index f1e46ea6b81..0a9b9a97011 100644 --- a/arch/arm/plat-omap/common.c +++ b/arch/arm/plat-omap/common.c @@ -20,6 +20,7 @@ #include <plat/board.h> #include <plat/vram.h> #include <plat/dsp.h> +#include <plat/dma.h> #include <plat/omap-secure.h> diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c index ecdb3da0dea..612227efe34 100644 --- a/arch/arm/plat-omap/dma.c +++ b/arch/arm/plat-omap/dma.c @@ -41,6 +41,15 @@ #include <plat/tc.h> +/* + * MAX_LOGICAL_DMA_CH_COUNT: the maximum number of logical DMA + * channels that an instance of the SDMA IP block can support. Used + * to size arrays. (The actual maximum on a particular SoC may be less + * than this -- for example, OMAP1 SDMA instances only support 17 logical + * DMA channels.) + */ +#define MAX_LOGICAL_DMA_CH_COUNT 32 + #undef DEBUG #ifndef CONFIG_ARCH_OMAP1 @@ -883,7 +892,7 @@ void omap_start_dma(int lch) if (!omap_dma_in_1510_mode() && dma_chan[lch].next_lch != -1) { int next_lch, cur_lch; - char dma_chan_link_map[dma_lch_count]; + char dma_chan_link_map[MAX_LOGICAL_DMA_CH_COUNT]; dma_chan_link_map[lch] = 1; /* Set the link register of the first channel */ @@ -967,7 +976,7 @@ void omap_stop_dma(int lch) if (!omap_dma_in_1510_mode() && dma_chan[lch].next_lch != -1) { int next_lch, cur_lch = lch; - char dma_chan_link_map[dma_lch_count]; + char dma_chan_link_map[MAX_LOGICAL_DMA_CH_COUNT]; memset(dma_chan_link_map, 0, sizeof(dma_chan_link_map)); do { diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c index 652139c0339..c4ed35e89fb 100644 --- a/arch/arm/plat-omap/dmtimer.c +++ b/arch/arm/plat-omap/dmtimer.c @@ -349,11 +349,12 @@ EXPORT_SYMBOL_GPL(omap_dm_timer_start); int omap_dm_timer_stop(struct omap_dm_timer *timer) { unsigned long rate = 0; - struct dmtimer_platform_data *pdata = timer->pdev->dev.platform_data; + struct dmtimer_platform_data *pdata; if (unlikely(!timer)) return -EINVAL; + pdata = timer->pdev->dev.platform_data; if (!pdata->needs_manual_reset) rate = clk_get_rate(timer->fclk); diff --git a/arch/arm/plat-omap/include/plat/board.h b/arch/arm/plat-omap/include/plat/board.h index d5eb4c87db9..4814c5b6530 100644 --- a/arch/arm/plat-omap/include/plat/board.h +++ b/arch/arm/plat-omap/include/plat/board.h @@ -91,6 +91,8 @@ struct omap_usb_config { u32 (*usb0_init)(unsigned nwires, unsigned is_device); u32 (*usb1_init)(unsigned nwires); u32 (*usb2_init)(unsigned nwires, unsigned alt_pingroup); + + int (*ocpi_enable)(void); }; struct omap_lcd_config { diff --git a/arch/arm/plat-omap/include/plat/common.h b/arch/arm/plat-omap/include/plat/common.h index b4d7ec3fbfb..a557b8484e6 100644 --- a/arch/arm/plat-omap/include/plat/common.h +++ b/arch/arm/plat-omap/include/plat/common.h @@ -32,6 +32,8 @@ extern int __init omap_init_clocksource_32k(void); +extern void __init omap_check_revision(void); + extern void omap_reserve(void); extern int omap_dss_reset(struct omap_hwmod *); diff --git a/arch/arm/plat-omap/include/plat/dma.h b/arch/arm/plat-omap/include/plat/dma.h index dc562a5c0a8..42afb4c4551 100644 --- a/arch/arm/plat-omap/include/plat/dma.h +++ b/arch/arm/plat-omap/include/plat/dma.h @@ -442,6 +442,7 @@ struct omap_system_dma_plat_info { u32 (*dma_read)(int reg, int lch); }; +extern void __init omap_init_consistent_dma_size(void); extern void omap_set_dma_priority(int lch, int dst_port, int priority); extern int omap_request_dma(int dev_id, const char *dev_name, void (*callback)(int lch, u16 ch_status, void *data), diff --git a/arch/arm/plat-omap/include/plat/dmtimer.h b/arch/arm/plat-omap/include/plat/dmtimer.h index 9418f00b6c3..230ff91be49 100644 --- a/arch/arm/plat-omap/include/plat/dmtimer.h +++ b/arch/arm/plat-omap/include/plat/dmtimer.h @@ -316,12 +316,12 @@ static inline void __omap_dm_timer_init_regs(struct omap_dm_timer *timer) OMAP_TIMER_V1_SYS_STAT_OFFSET; timer->irq_stat = timer->io_base + OMAP_TIMER_V1_STAT_OFFSET; timer->irq_ena = timer->io_base + OMAP_TIMER_V1_INT_EN_OFFSET; - timer->irq_dis = 0; + timer->irq_dis = NULL; timer->pend = timer->io_base + _OMAP_TIMER_WRITE_PEND_OFFSET; timer->func_base = timer->io_base; } else { timer->revision = 2; - timer->sys_stat = 0; + timer->sys_stat = NULL; timer->irq_stat = timer->io_base + OMAP_TIMER_V2_IRQSTATUS; timer->irq_ena = timer->io_base + OMAP_TIMER_V2_IRQENABLE_SET; timer->irq_dis = timer->io_base + OMAP_TIMER_V2_IRQENABLE_CLR; diff --git a/arch/arm/plat-omap/omap_device.c b/arch/arm/plat-omap/omap_device.c index d50cbc6385b..c490240bb82 100644 --- a/arch/arm/plat-omap/omap_device.c +++ b/arch/arm/plat-omap/omap_device.c @@ -475,13 +475,11 @@ static int omap_device_count_resources(struct omap_device *od) static int omap_device_fill_resources(struct omap_device *od, struct resource *res) { - int c = 0; int i, r; for (i = 0; i < od->hwmods_cnt; i++) { r = omap_hwmod_fill_resources(od->hwmods[i], res); res += r; - c += r; } return 0; diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c index f9a8c5341ee..477363c163e 100644 --- a/arch/arm/plat-omap/sram.c +++ b/arch/arm/plat-omap/sram.c @@ -196,8 +196,8 @@ static void __init omap_map_sram(void) * Looks like we need to preserve some bootloader code at the * beginning of SRAM for jumping to flash for reboot to work... */ - memset((void *)omap_sram_base + SRAM_BOOTLOADER_SZ, 0, - omap_sram_size - SRAM_BOOTLOADER_SZ); + memset_io(omap_sram_base + SRAM_BOOTLOADER_SZ, 0, + omap_sram_size - SRAM_BOOTLOADER_SZ); } /* diff --git a/arch/arm/plat-omap/usb.c b/arch/arm/plat-omap/usb.c index d2bbfd1cb0b..5db75619f21 100644 --- a/arch/arm/plat-omap/usb.c +++ b/arch/arm/plat-omap/usb.c @@ -31,8 +31,6 @@ #include <mach/hardware.h> -#include "../mach-omap2/common.h" - #ifdef CONFIG_ARCH_OMAP_OTG void __init @@ -138,8 +136,6 @@ omap_otg_init(struct omap_usb_config *config) #endif pr_debug("OTG_SYSCON_1 = %08x\n", omap_readl(OTG_SYSCON_1)); omap_writel(syscon, OTG_SYSCON_1); - - status = 0; } #else diff --git a/drivers/usb/host/ohci-omap.c b/drivers/usb/host/ohci-omap.c index 96451e41ee8..71229cb97e3 100644 --- a/drivers/usb/host/ohci-omap.c +++ b/drivers/usb/host/ohci-omap.c @@ -205,8 +205,9 @@ static int ohci_omap_init(struct usb_hcd *hcd) need_transceiver = need_transceiver || machine_is_omap_h2() || machine_is_omap_h3(); - if (cpu_is_omap16xx()) - ocpi_enable(); + /* XXX OMAP16xx only */ + if (config->ocpi_enable) + config->ocpi_enable(); #ifdef CONFIG_USB_OTG if (need_transceiver) { |