diff options
41 files changed, 5161 insertions, 22 deletions
diff --git a/Documentation/powerpc/dts-bindings/nintendo/gamecube.txt b/Documentation/powerpc/dts-bindings/nintendo/gamecube.txt new file mode 100644 index 00000000000..b558585b1aa --- /dev/null +++ b/Documentation/powerpc/dts-bindings/nintendo/gamecube.txt @@ -0,0 +1,109 @@ + +Nintendo GameCube device tree +============================= + +1) The "flipper" node + + This node represents the multi-function "Flipper" chip, which packages + many of the devices found in the Nintendo GameCube. + + Required properties: + + - compatible : Should be "nintendo,flipper" + +1.a) The Video Interface (VI) node + + Represents the interface between the graphics processor and a external + video encoder. + + Required properties: + + - compatible : should be "nintendo,flipper-vi" + - reg : should contain the VI registers location and length + - interrupts : should contain the VI interrupt + +1.b) The Processor Interface (PI) node + + Represents the data and control interface between the main processor + and graphics and audio processor. + + Required properties: + + - compatible : should be "nintendo,flipper-pi" + - reg : should contain the PI registers location and length + +1.b.i) The "Flipper" interrupt controller node + + Represents the interrupt controller within the "Flipper" chip. + The node for the "Flipper" interrupt controller must be placed under + the PI node. + + Required properties: + + - compatible : should be "nintendo,flipper-pic" + +1.c) The Digital Signal Procesor (DSP) node + + Represents the digital signal processor interface, designed to offload + audio related tasks. + + Required properties: + + - compatible : should be "nintendo,flipper-dsp" + - reg : should contain the DSP registers location and length + - interrupts : should contain the DSP interrupt + +1.c.i) The Auxiliary RAM (ARAM) node + + Represents the non cpu-addressable ram designed mainly to store audio + related information. + The ARAM node must be placed under the DSP node. + + Required properties: + + - compatible : should be "nintendo,flipper-aram" + - reg : should contain the ARAM start (zero-based) and length + +1.d) The Disk Interface (DI) node + + Represents the interface used to communicate with mass storage devices. + + Required properties: + + - compatible : should be "nintendo,flipper-di" + - reg : should contain the DI registers location and length + - interrupts : should contain the DI interrupt + +1.e) The Audio Interface (AI) node + + Represents the interface to the external 16-bit stereo digital-to-analog + converter. + + Required properties: + + - compatible : should be "nintendo,flipper-ai" + - reg : should contain the AI registers location and length + - interrupts : should contain the AI interrupt + +1.f) The Serial Interface (SI) node + + Represents the interface to the four single bit serial interfaces. + The SI is a proprietary serial interface used normally to control gamepads. + It's NOT a RS232-type interface. + + Required properties: + + - compatible : should be "nintendo,flipper-si" + - reg : should contain the SI registers location and length + - interrupts : should contain the SI interrupt + +1.g) The External Interface (EXI) node + + Represents the multi-channel SPI-like interface. + + Required properties: + + - compatible : should be "nintendo,flipper-exi" + - reg : should contain the EXI registers location and length + - interrupts : should contain the EXI interrupt + diff --git a/Documentation/powerpc/dts-bindings/nintendo/wii.txt b/Documentation/powerpc/dts-bindings/nintendo/wii.txt new file mode 100644 index 00000000000..a7e155a023b --- /dev/null +++ b/Documentation/powerpc/dts-bindings/nintendo/wii.txt @@ -0,0 +1,184 @@ + +Nintendo Wii device tree +======================== + +0) The root node + + This node represents the Nintendo Wii video game console. + + Required properties: + + - model : Should be "nintendo,wii" + - compatible : Should be "nintendo,wii" + +1) The "hollywood" node + + This node represents the multi-function "Hollywood" chip, which packages + many of the devices found in the Nintendo Wii. + + Required properties: + + - compatible : Should be "nintendo,hollywood" + +1.a) The Video Interface (VI) node + + Represents the interface between the graphics processor and a external + video encoder. + + Required properties: + + - compatible : should be "nintendo,hollywood-vi","nintendo,flipper-vi" + - reg : should contain the VI registers location and length + - interrupts : should contain the VI interrupt + +1.b) The Processor Interface (PI) node + + Represents the data and control interface between the main processor + and graphics and audio processor. + + Required properties: + + - compatible : should be "nintendo,hollywood-pi","nintendo,flipper-pi" + - reg : should contain the PI registers location and length + +1.b.i) The "Flipper" interrupt controller node + + Represents the "Flipper" interrupt controller within the "Hollywood" chip. + The node for the "Flipper" interrupt controller must be placed under + the PI node. + + Required properties: + + - #interrupt-cells : <1> + - compatible : should be "nintendo,flipper-pic" + - interrupt-controller + +1.c) The Digital Signal Procesor (DSP) node + + Represents the digital signal processor interface, designed to offload + audio related tasks. + + Required properties: + + - compatible : should be "nintendo,hollywood-dsp","nintendo,flipper-dsp" + - reg : should contain the DSP registers location and length + - interrupts : should contain the DSP interrupt + +1.d) The Serial Interface (SI) node + + Represents the interface to the four single bit serial interfaces. + The SI is a proprietary serial interface used normally to control gamepads. + It's NOT a RS232-type interface. + + Required properties: + + - compatible : should be "nintendo,hollywood-si","nintendo,flipper-si" + - reg : should contain the SI registers location and length + - interrupts : should contain the SI interrupt + +1.e) The Audio Interface (AI) node + + Represents the interface to the external 16-bit stereo digital-to-analog + converter. + + Required properties: + + - compatible : should be "nintendo,hollywood-ai","nintendo,flipper-ai" + - reg : should contain the AI registers location and length + - interrupts : should contain the AI interrupt + +1.f) The External Interface (EXI) node + + Represents the multi-channel SPI-like interface. + + Required properties: + + - compatible : should be "nintendo,hollywood-exi","nintendo,flipper-exi" + - reg : should contain the EXI registers location and length + - interrupts : should contain the EXI interrupt + +1.g) The Open Host Controller Interface (OHCI) nodes + + Represent the USB 1.x Open Host Controller Interfaces. + + Required properties: + + - compatible : should be "nintendo,hollywood-usb-ohci","usb-ohci" + - reg : should contain the OHCI registers location and length + - interrupts : should contain the OHCI interrupt + +1.h) The Enhanced Host Controller Interface (EHCI) node + + Represents the USB 2.0 Enhanced Host Controller Interface. + + Required properties: + + - compatible : should be "nintendo,hollywood-usb-ehci","usb-ehci" + - reg : should contain the EHCI registers location and length + - interrupts : should contain the EHCI interrupt + +1.i) The Secure Digital Host Controller Interface (SDHCI) nodes + + Represent the Secure Digital Host Controller Interfaces. + + Required properties: + + - compatible : should be "nintendo,hollywood-sdhci","sdhci" + - reg : should contain the SDHCI registers location and length + - interrupts : should contain the SDHCI interrupt + +1.j) The Inter-Processsor Communication (IPC) node + + Represent the Inter-Processor Communication interface. This interface + enables communications between the Broadway and the Starlet processors. + + - compatible : should be "nintendo,hollywood-ipc" + - reg : should contain the IPC registers location and length + - interrupts : should contain the IPC interrupt + +1.k) The "Hollywood" interrupt controller node + + Represents the "Hollywood" interrupt controller within the + "Hollywood" chip. + + Required properties: + + - #interrupt-cells : <1> + - compatible : should be "nintendo,hollywood-pic" + - reg : should contain the controller registers location and length + - interrupt-controller + - interrupts : should contain the cascade interrupt of the "flipper" pic + - interrupt-parent: should contain the phandle of the "flipper" pic + +1.l) The General Purpose I/O (GPIO) controller node + + Represents the dual access 32 GPIO controller interface. + + Required properties: + + - #gpio-cells : <2> + - compatible : should be "nintendo,hollywood-gpio" + - reg : should contain the IPC registers location and length + - gpio-controller + +1.m) The control node + + Represents the control interface used to setup several miscellaneous + settings of the "Hollywood" chip like boot memory mappings, resets, + disk interface mode, etc. + + Required properties: + + - compatible : should be "nintendo,hollywood-control" + - reg : should contain the control registers location and length + +1.n) The Disk Interface (DI) node + + Represents the interface used to communicate with mass storage devices. + + Required properties: + + - compatible : should be "nintendo,hollywood-di" + - reg : should contain the DI registers location and length + - interrupts : should contain the DI interrupt + diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index 0df57466e78..ba3948c7007 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -704,7 +704,7 @@ config PPC_PCI_CHOICE config PCI bool "PCI support" if PPC_PCI_CHOICE default y if !40x && !CPM2 && !8xx && !PPC_83xx \ - && !PPC_85xx && !PPC_86xx + && !PPC_85xx && !PPC_86xx && !GAMECUBE_COMMON default PCI_PERMEDIA if !4xx && !CPM2 && !8xx default PCI_QSPAN if !4xx && !CPM2 && 8xx select ARCH_SUPPORTS_MSI diff --git a/arch/powerpc/Kconfig.debug b/arch/powerpc/Kconfig.debug index bf3382f1904..5cdd7ed9a12 100644 --- a/arch/powerpc/Kconfig.debug +++ b/arch/powerpc/Kconfig.debug @@ -254,6 +254,14 @@ config PPC_EARLY_DEBUG_CPM using a CPM-based serial port. This assumes that the bootwrapper has run, and set up the CPM in a particular way. +config PPC_EARLY_DEBUG_USBGECKO + bool "Early debugging through the USB Gecko adapter" + depends on GAMECUBE_COMMON + select USBGECKO_UDBG + help + Select this to enable early debugging for Nintendo GameCube/Wii + consoles via an external USB Gecko adapter. + endchoice config PPC_EARLY_DEBUG_44x_PHYSLOW diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile index 7bfc8ad8779..bb2465bcb32 100644 --- a/arch/powerpc/boot/Makefile +++ b/arch/powerpc/boot/Makefile @@ -66,7 +66,7 @@ src-wlib := string.S crt0.S crtsavres.S stdio.c main.c \ gunzip_util.c elf_util.c $(zlib) devtree.c oflib.c ofconsole.c \ 4xx.c ebony.c mv64x60.c mpsc.c mv64x60_i2c.c cuboot.c bamboo.c \ cpm-serial.c stdlib.c mpc52xx-psc.c planetcore.c uartlite.c \ - fsl-soc.c mpc8xx.c pq2.c + fsl-soc.c mpc8xx.c pq2.c ugecon.c src-plat := of.c cuboot-52xx.c cuboot-824x.c cuboot-83xx.c cuboot-85xx.c holly.c \ cuboot-ebony.c cuboot-hotfoot.c treeboot-ebony.c prpmc2800.c \ ps3-head.S ps3-hvcall.S ps3.c treeboot-bamboo.c cuboot-8xx.c \ @@ -76,7 +76,8 @@ src-plat := of.c cuboot-52xx.c cuboot-824x.c cuboot-83xx.c cuboot-85xx.c holly.c cuboot-katmai.c cuboot-rainier.c redboot-8xx.c ep8248e.c \ cuboot-warp.c cuboot-85xx-cpm2.c cuboot-yosemite.c simpleboot.c \ virtex405-head.S virtex.c redboot-83xx.c cuboot-sam440ep.c \ - cuboot-acadia.c cuboot-amigaone.c cuboot-kilauea.c + cuboot-acadia.c cuboot-amigaone.c cuboot-kilauea.c \ + gamecube-head.S gamecube.c wii-head.S wii.c src-boot := $(src-wlib) $(src-plat) empty.c src-boot := $(addprefix $(obj)/, $(src-boot)) @@ -254,6 +255,8 @@ image-$(CONFIG_KSI8560) += cuImage.ksi8560 image-$(CONFIG_STORCENTER) += cuImage.storcenter image-$(CONFIG_MPC7448HPC2) += cuImage.mpc7448hpc2 image-$(CONFIG_PPC_C2K) += cuImage.c2k +image-$(CONFIG_GAMECUBE) += dtbImage.gamecube +image-$(CONFIG_WII) += dtbImage.wii # Board port in arch/powerpc/platform/amigaone/Kconfig image-$(CONFIG_AMIGAONE) += cuImage.amigaone diff --git a/arch/powerpc/boot/dts/gamecube.dts b/arch/powerpc/boot/dts/gamecube.dts new file mode 100644 index 00000000000..ef3be0e58b0 --- /dev/null +++ b/arch/powerpc/boot/dts/gamecube.dts @@ -0,0 +1,114 @@ +/* + * arch/powerpc/boot/dts/gamecube.dts + * + * Nintendo GameCube platform device tree source + * Copyright (C) 2007-2009 The GameCube Linux Team + * Copyright (C) 2007,2008,2009 Albert Herranz + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + */ + +/dts-v1/; + +/ { + model = "nintendo,gamecube"; + compatible = "nintendo,gamecube"; + #address-cells = <1>; + #size-cells = <1>; + + chosen { + bootargs = "root=/dev/gcnsda2 rootwait udbg-immortal"; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x01800000>; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,gekko@0 { + device_type = "cpu"; + reg = <0>; + clock-frequency = <486000000>; /* 486MHz */ + bus-frequency = <162000000>; /* 162MHz core-to-bus 3x */ + timebase-frequency = <40500000>; /* 162MHz / 4 */ + i-cache-line-size = <32>; + d-cache-line-size = <32>; + i-cache-size = <32768>; + d-cache-size = <32768>; + }; + }; + + /* devices contained int the flipper chipset */ + flipper { + #address-cells = <1>; + #size-cells = <1>; + compatible = "nintendo,flipper"; + ranges = <0x0c000000 0x0c000000 0x00010000>; + interrupt-parent = <&PIC>; + + video@0c002000 { + compatible = "nintendo,flipper-vi"; + reg = <0x0c002000 0x100>; + interrupts = <8>; + }; + + processor-interface@0c003000 { + compatible = "nintendo,flipper-pi"; + reg = <0x0c003000 0x100>; + + PIC: pic { + #interrupt-cells = <1>; + compatible = "nintendo,flipper-pic"; + interrupt-controller; + }; + }; + + dsp@0c005000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "nintendo,flipper-dsp"; + reg = <0x0c005000 0x200>; + interrupts = <6>; + + memory@0 { + compatible = "nintendo,flipper-aram"; + reg = <0 0x1000000>; /* 16MB */ + }; + }; + + disk@0c006000 { + compatible = "nintendo,flipper-di"; + reg = <0x0c006000 0x40>; + interrupts = <2>; + }; + + audio@0c006c00 { + compatible = "nintendo,flipper-ai"; + reg = <0x0c006c00 0x20>; + interrupts = <6>; + }; + + gamepad-controller@0c006400 { + compatible = "nintendo,flipper-si"; + reg = <0x0c006400 0x100>; + interrupts = <3>; + }; + + /* External Interface bus */ + exi@0c006800 { + compatible = "nintendo,flipper-exi"; + reg = <0x0c006800 0x40>; + virtual-reg = <0x0c006800>; + interrupts = <4>; + }; + }; +}; + diff --git a/arch/powerpc/boot/dts/wii.dts b/arch/powerpc/boot/dts/wii.dts new file mode 100644 index 00000000000..77528c9a8db --- /dev/null +++ b/arch/powerpc/boot/dts/wii.dts @@ -0,0 +1,218 @@ +/* + * arch/powerpc/boot/dts/wii.dts + * + * Nintendo Wii platform device tree source + * Copyright (C) 2008-2009 The GameCube Linux Team + * Copyright (C) 2008,2009 Albert Herranz + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + */ + +/dts-v1/; + +/* + * This is commented-out for now. + * Until a later patch is merged, the kernel can use only the first + * contiguous RAM range and will BUG() if the memreserve is outside + * that range. + */ +/*/memreserve/ 0x10000000 0x0004000;*/ /* DSP RAM */ + +/ { + model = "nintendo,wii"; + compatible = "nintendo,wii"; + #address-cells = <1>; + #size-cells = <1>; + + chosen { + bootargs = "root=/dev/mmcblk0p2 rootwait udbg-immortal"; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x01800000 /* MEM1 24MB 1T-SRAM */ + 0x10000000 0x04000000>; /* MEM2 64MB GDDR3 */ + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,broadway@0 { + device_type = "cpu"; + reg = <0>; + clock-frequency = <729000000>; /* 729MHz */ + bus-frequency = <243000000>; /* 243MHz core-to-bus 3x */ + timebase-frequency = <60750000>; /* 243MHz / 4 */ + i-cache-line-size = <32>; + d-cache-line-size = <32>; + i-cache-size = <32768>; + d-cache-size = <32768>; + }; + }; + + /* devices contained in the hollywood chipset */ + hollywood { + #address-cells = <1>; + #size-cells = <1>; + compatible = "nintendo,hollywood"; + ranges = <0x0c000000 0x0c000000 0x01000000 + 0x0d000000 0x0d000000 0x00800000 + 0x0d800000 0x0d800000 0x00800000>; + interrupt-parent = <&PIC0>; + + video@0c002000 { + compatible = "nintendo,hollywood-vi", + "nintendo,flipper-vi"; + reg = <0x0c002000 0x100>; + interrupts = <8>; + }; + + processor-interface@0c003000 { + compatible = "nintendo,hollywood-pi", + "nintendo,flipper-pi"; + reg = <0x0c003000 0x100>; + + PIC0: pic0 { + #interrupt-cells = <1>; + compatible = "nintendo,flipper-pic"; + interrupt-controller; + }; + }; + + dsp@0c005000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "nintendo,hollywood-dsp", + "nintendo,flipper-dsp"; + reg = <0x0c005000 0x200>; + interrupts = <6>; + }; + + gamepad-controller@0d006400 { + compatible = "nintendo,hollywood-si", + "nintendo,flipper-si"; + reg = <0x0d006400 0x100>; + interrupts = <3>; + }; + + audio@0c006c00 { + compatible = "nintendo,hollywood-ai", + "nintendo,flipper-ai"; + reg = <0x0d006c00 0x20>; + interrupts = <6>; + }; + + /* External Interface bus */ + exi@0d006800 { + compatible = "nintendo,hollywood-exi", + "nintendo,flipper-exi"; + reg = <0x0d006800 0x40>; + virtual-reg = <0x0d006800>; + interrupts = <4>; + }; + + usb@0d040000 { + compatible = "nintendo,hollywood-usb-ehci", + "usb-ehci"; + reg = <0x0d040000 0x100>; + interrupts = <4>; + interrupt-parent = <&PIC1>; + }; + + usb@0d050000 { + compatible = "nintendo,hollywood-usb-ohci", + "usb-ohci"; + reg = <0x0d050000 0x100>; + interrupts = <5>; + interrupt-parent = <&PIC1>; + }; + + usb@0d060000 { + compatible = "nintendo,hollywood-usb-ohci", + "usb-ohci"; + reg = <0x0d060000 0x100>; + interrupts = <6>; + interrupt-parent = <&PIC1>; + }; + + sd@0d070000 { + compatible = "nintendo,hollywood-sdhci", + "sdhci"; + reg = <0x0d070000 0x200>; + interrupts = <7>; + interrupt-parent = <&PIC1>; + }; + + sdio@0d080000 { + compatible = "nintendo,hollywood-sdhci", + "sdhci"; + reg = <0x0d080000 0x200>; + interrupts = <8>; + interrupt-parent = <&PIC1>; + }; + + ipc@0d000000 { + compatible = "nintendo,hollywood-ipc"; + reg = <0x0d000000 0x10>; + interrupts = <30>; + interrupt-parent = <&PIC1>; + }; + + PIC1: pic1@0d800030 { + #interrupt-cells = <1>; + compatible = "nintendo,hollywood-pic"; + reg = <0x0d800030 0x10>; + interrupt-controller; + interrupts = <14>; + }; + + GPIO: gpio@0d8000c0 { + #gpio-cells = <2>; + compatible = "nintendo,hollywood-gpio"; + reg = <0x0d8000c0 0x40>; + gpio-controller; + + /* + * This is commented out while a standard binding + * for i2c over gpio is defined. + */ + /* + i2c-video { + #address-cells = <1>; + #size-cells = <0>; + compatible = "i2c-gpio"; + + gpios = <&GPIO 15 0 + &GPIO 14 0>; + clock-frequency = <250000>; + no-clock-stretching; + scl-is-open-drain; + sda-is-open-drain; + sda-enforce-dir; + + AVE: audio-video-encoder@70 { + compatible = "nintendo,wii-audio-video-encoder"; + reg = <0x70>; + }; + }; + */ + }; + + control@0d800100 { + compatible = "nintendo,hollywood-control"; + reg = <0x0d800100 0x300>; + }; + + disk@0d806000 { + compatible = "nintendo,hollywood-di"; + reg = <0x0d806000 0x40>; + interrupts = <2>; + }; + }; +}; + diff --git a/arch/powerpc/boot/gamecube-head.S b/arch/powerpc/boot/gamecube-head.S new file mode 100644 index 00000000000..65a9b2a3bf3 --- /dev/null +++ b/arch/powerpc/boot/gamecube-head.S @@ -0,0 +1,111 @@ +/* + * arch/powerpc/boot/gamecube-head.S + * + * Nintendo GameCube bootwrapper entry. + * Copyright (C) 2004-2009 The GameCube Linux Team + * Copyright (C) 2008,2009 Albert Herranz + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + */ + +#include "ppc_asm.h" + +/* + * The entry code does no assumptions regarding: + * - if the data and instruction caches are enabled or not + * - if the MMU is enabled or not + * + * We enable the caches if not already enabled, enable the MMU with an + * identity mapping scheme and jump to the start code. + */ + + .text + + .globl _zimage_start +_zimage_start: + + /* turn the MMU off */ + mfmsr 9 + rlwinm 9, 9, 0, ~((1<<4)|(1<<5)) /* MSR_DR|MSR_IR */ + bcl 20, 31, 1f +1: + mflr 8 + clrlwi 8, 8, 3 /* convert to a real address */ + addi 8, 8, _mmu_off - 1b + mtsrr0 8 + mtsrr1 9 + rfi +_mmu_off: + /* MMU disabled */ + + /* setup BATs */ + isync + li 8, 0 + mtspr 0x210, 8 /* IBAT0U */ + mtspr 0x212, 8 /* IBAT1U */ + mtspr 0x214, 8 /* IBAT2U */ + mtspr 0x216, 8 /* IBAT3U */ + mtspr 0x218, 8 /* DBAT0U */ + mtspr 0x21a, 8 /* DBAT1U */ + mtspr 0x21c, 8 /* DBAT2U */ + mtspr 0x21e, 8 /* DBAT3U */ + + li 8, 0x01ff /* first 16MiB */ + li 9, 0x0002 /* rw */ + mtspr 0x211, 9 /* IBAT0L */ + mtspr 0x210, 8 /* IBAT0U */ + mtspr 0x219, 9 /* DBAT0L */ + mtspr 0x218, 8 /* DBAT0U */ + + lis 8, 0x0c00 /* I/O mem */ + ori 8, 8, 0x3ff /* 32MiB */ + lis 9, 0x0c00 + ori 9, 9, 0x002a /* uncached, guarded, rw */ + mtspr 0x21b, 9 /* DBAT1L */ + mtspr 0x21a, 8 /* DBAT1U */ + + lis 8, 0x0100 /* next 8MiB */ + ori 8, 8, 0x00ff /* 8MiB */ + lis 9, 0x0100 + ori 9, 9, 0x0002 /* rw */ + mtspr 0x215, 9 /* IBAT2L */ + mtspr 0x214, 8 /* IBAT2U */ + mtspr 0x21d, 9 /* DBAT2L */ + mtspr 0x21c, 8 /* DBAT2U */ + + /* enable and invalidate the caches if not already enabled */ + mfspr 8, 0x3f0 /* HID0 */ + andi. 0, 8, (1<<15) /* HID0_ICE */ + bne 1f + ori 8, 8, (1<<15)|(1<<11) /* HID0_ICE|HID0_ICFI*/ +1: + andi. 0, 8, (1<<14) /* HID0_DCE */ + bne 1f + ori 8, 8, (1<<14)|(1<<10) /* HID0_DCE|HID0_DCFI*/ +1: + mtspr 0x3f0, 8 /* HID0 */ + isync + + /* initialize arguments */ + li 3, 0 + li 4, 0 + li 5, 0 + + /* turn the MMU on */ + bcl 20, 31, 1f +1: + mflr 8 + addi 8, 8, _mmu_on - 1b + mfmsr 9 + ori 9, 9, (1<<4)|(1<<5) /* MSR_DR|MSR_IR */ + mtsrr0 8 + mtsrr1 9 + sync + rfi +_mmu_on: + b _zimage_start_lib + diff --git a/arch/powerpc/boot/gamecube.c b/arch/powerpc/boot/gamecube.c new file mode 100644 index 00000000000..28ae7057be5 --- /dev/null +++ b/arch/powerpc/boot/gamecube.c @@ -0,0 +1,35 @@ +/* + * arch/powerpc/boot/gamecube.c + * + * Nintendo GameCube bootwrapper support + * Copyright (C) 2004-2009 The GameCube Linux Team + * Copyright (C) 2008,2009 Albert Herranz + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + */ + +#include <stddef.h> +#include "stdio.h" +#include "types.h" +#include "io.h" +#include "ops.h" + +#include "ugecon.h" + +BSS_STACK(8192); + +void platform_init(unsigned long r3, unsigned long r4, unsigned long r5) +{ + u32 heapsize = 16*1024*1024 - (u32)_end; + + simple_alloc_init(_end, heapsize, 32, 64); + fdt_init(_dtb_start); + + if (ug_probe()) + console_ops.write = ug_console_write; +} + diff --git a/arch/powerpc/boot/ugecon.c b/arch/powerpc/boot/ugecon.c new file mode 100644 index 00000000000..50609ea6ddf --- /dev/null +++ b/arch/powerpc/boot/ugecon.c @@ -0,0 +1,147 @@ +/* + * arch/powerpc/boot/ugecon.c + * + * USB Gecko bootwrapper console. + * Copyright (C) 2008-2009 The GameCube Linux Team + * Copyright (C) 2008,2009 Albert Herranz + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + */ + +#include <stddef.h> +#include "stdio.h" +#include "types.h" +#include "io.h" +#include "ops.h" + + +#define EXI_CLK_32MHZ 5 + +#define EXI_CSR 0x00 +#define EXI_CSR_CLKMASK (0x7<<4) +#define EXI_CSR_CLK_32MHZ (EXI_CLK_32MHZ<<4) +#define EXI_CSR_CSMASK (0x7<<7) +#define EXI_CSR_CS_0 (0x1<<7) /* Chip Select 001 */ + +#define EXI_CR 0x0c +#define EXI_CR_TSTART (1<<0) +#define EXI_CR_WRITE (1<<2) +#define EXI_CR_READ_WRITE (2<<2) +#define EXI_CR_TLEN(len) (((len)-1)<<4) + +#define EXI_DATA 0x10 + + +/* virtual address base for input/output, retrieved from device tree */ +static void *ug_io_base; + + +static u32 ug_io_transaction(u32 in) +{ + u32 *csr_reg = ug_io_base + EXI_CSR; + u32 *data_reg = ug_io_base + EXI_DATA; + u32 *cr_reg = ug_io_base + EXI_CR; + u32 csr, data, cr; + + /* select */ + csr = EXI_CSR_CLK_32MHZ | EXI_CSR_CS_0; + out_be32(csr_reg, csr); + + /* read/write */ + data = in; + out_be32(data_reg, data); + cr = EXI_CR_TLEN(2) | EXI_CR_READ_WRITE | EXI_CR_TSTART; + out_be32(cr_reg, cr); + + while (in_be32(cr_reg) & EXI_CR_TSTART) + barrier(); + + /* deselect */ + out_be32(csr_reg, 0); + + data = in_be32(data_reg); + return data; +} + +static int ug_is_txfifo_ready(void) +{ + return ug_io_transaction(0xc0000000) & 0x04000000; +} + +static void ug_raw_putc(char ch) +{ + ug_io_transaction(0xb0000000 | (ch << 20)); +} + +static void ug_putc(char ch) +{ + int count = 16; + + if (!ug_io_base) + return; + + while (!ug_is_txfifo_ready() && count--) + barrier(); + if (count) + ug_raw_putc(ch); +} + +void ug_console_write(const char *buf, int len) +{ + char *b = (char *)buf; + + while (len--) { + if (*b == '\n') + ug_putc('\r'); + ug_putc(*b++); + } +} + +static int ug_is_adapter_present(void) +{ + if (!ug_io_base) + return 0; + return ug_io_transaction(0x90000000) == 0x04700000; +} + +static void *ug_grab_exi_io_base(void) +{ + u32 v; + void *devp; + + devp = find_node_by_compatible(NULL, "nintendo,flipper-exi"); + if (devp == NULL) + goto err_out; + if (getprop(devp, "virtual-reg", &v, sizeof(v)) != sizeof(v)) + goto err_out; + + return (void *)v; + +err_out: + return NULL; +} + +void *ug_probe(void) +{ + void *exi_io_base; + int i; + + exi_io_base = ug_grab_exi_io_base(); + if (!exi_io_base) + return NULL; + + /* look for a usbgecko on memcard slots A and B */ + for (i = 0; i < 2; i++) { + ug_io_base = exi_io_base + 0x14 * i; + if (ug_is_adapter_present()) + break; + } + if (i == 2) + ug_io_base = NULL; + return ug_io_base; +} + diff --git a/arch/powerpc/boot/ugecon.h b/arch/powerpc/boot/ugecon.h new file mode 100644 index 00000000000..43737539169 --- /dev/null +++ b/arch/powerpc/boot/ugecon.h @@ -0,0 +1,24 @@ +/* + * arch/powerpc/boot/ugecon.h + * + * USB Gecko early bootwrapper console. + * Copyright (C) 2008-2009 The GameCube Linux Team + * Copyright (C) 2008,2009 Albert Herranz + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + */ + +#ifndef __UGECON_H +#define __UGECON_H + +extern void *ug_probe(void); + +extern void ug_putc(char ch); +extern void ug_console_write(const char *buf, int len); + +#endif /* __UGECON_H */ + diff --git a/arch/powerpc/boot/wii-head.S b/arch/powerpc/boot/wii-head.S new file mode 100644 index 00000000000..edd79b836fc --- /dev/null +++ b/arch/powerpc/boot/wii-head.S @@ -0,0 +1,142 @@ +/* + * arch/powerpc/boot/wii-head.S + * + * Nintendo Wii bootwrapper entry. + * Copyright (C) 2008-2009 The GameCube Linux Team + * Copyright (C) 2008,2009 Albert Herranz + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + */ + +#include "ppc_asm.h" + +/* + * The entry code does no assumptions regarding: + * - if the data and instruction caches are enabled or not + * - if the MMU is enabled or not + * - if the high BATs are enabled or not + * + * We enable the high BATs, enable the caches if not already enabled, + * enable the MMU with an identity mapping scheme and jump to the start code. + */ + + .text + + .globl _zimage_start +_zimage_start: + + /* turn the MMU off */ + mfmsr 9 + rlwinm 9, 9, 0, ~((1<<4)|(1<<5)) /* MSR_DR|MSR_IR */ + bcl 20, 31, 1f +1: + mflr 8 + clrlwi 8, 8, 3 /* convert to a real address */ + addi 8, 8, _mmu_off - 1b + mtsrr0 8 + mtsrr1 9 + rfi +_mmu_off: + /* MMU disabled */ + + /* setup BATs */ + isync + li 8, 0 + mtspr 0x210, 8 /* IBAT0U */ + mtspr 0x212, 8 /* IBAT1U */ + mtspr 0x214, 8 /* IBAT2U */ + mtspr 0x216, 8 /* IBAT3U */ + mtspr 0x218, 8 /* DBAT0U */ + mtspr 0x21a, 8 /* DBAT1U */ + mtspr 0x21c, 8 /* DBAT2U */ + mtspr 0x21e, 8 /* DBAT3U */ + + mtspr 0x230, 8 /* IBAT4U */ + mtspr 0x232, 8 /* IBAT5U */ + mtspr 0x234, 8 /* IBAT6U */ + mtspr 0x236, 8 /* IBAT7U */ + mtspr 0x238, 8 /* DBAT4U */ + mtspr 0x23a, 8 /* DBAT5U */ + mtspr 0x23c, 8 /* DBAT6U */ + mtspr 0x23e, 8 /* DBAT7U */ + + li 8, 0x01ff /* first 16MiB */ + li 9, 0x0002 /* rw */ + mtspr 0x211, 9 /* IBAT0L */ + mtspr 0x210, 8 /* IBAT0U */ + mtspr 0x219, 9 /* DBAT0L */ + mtspr 0x218, 8 /* DBAT0U */ + + lis 8, 0x0c00 /* I/O mem */ + ori 8, 8, 0x3ff /* 32MiB */ + lis 9, 0x0c00 + ori 9, 9, 0x002a /* uncached, guarded, rw */ + mtspr 0x21b, 9 /* DBAT1L */ + mtspr 0x21a, 8 /* DBAT1U */ + + lis 8, 0x0100 /* next 8MiB */ + ori 8, 8, 0x00ff /* 8MiB */ + lis 9, 0x0100 + ori 9, 9, 0x0002 /* rw */ + mtspr 0x215, 9 /* IBAT2L */ + mtspr 0x214, 8 /* IBAT2U */ + mtspr 0x21d, 9 /* DBAT2L */ + mtspr 0x21c, 8 /* DBAT2U */ + + lis 8, 0x1000 /* MEM2 */ + ori 8, 8, 0x07ff /* 64MiB */ + lis 9, 0x1000 + ori 9, 9, 0x0002 /* rw */ + mtspr 0x216, 8 /* IBAT3U */ + mtspr 0x217, 9 /* IBAT3L */ + mtspr 0x21e, 8 /* DBAT3U */ + mtspr 0x21f, 9 /* DBAT3L */ + + /* enable the high BATs */ + mfspr 8, 0x3f3 /* HID4 */ + oris 8, 8, 0x0200 + mtspr 0x3f3, 8 /* HID4 */ + + /* enable and invalidate the caches if not already enabled */ + mfspr 8, 0x3f0 /* HID0 */ + andi. 0, 8, (1<<15) /* HID0_ICE */ + bne 1f + ori 8, 8, (1<<15)|(1<<11) /* HID0_ICE|HID0_ICFI*/ +1: + andi. 0, 8, (1<<14) /* HID0_DCE */ + bne 1f + ori 8, 8, (1<<14)|(1<<10) /* HID0_DCE|HID0_DCFI*/ +1: + mtspr 0x3f0, 8 /* HID0 */ + isync + + /* initialize arguments */ + li 3, 0 + li 4, 0 + li 5, 0 + + /* turn the MMU on */ + bcl 20, 31, 1f +1: + mflr 8 + addi 8, 8, _mmu_on - 1b + mfmsr 9 + ori 9, 9, (1<<4)|(1<<5) /* MSR_DR|MSR_IR */ + mtsrr0 8 + mtsrr1 9 + sync + rfi +_mmu_on: + /* turn on the front blue led (aka: yay! we got here!) */ + lis 8, 0x0d00 + ori 8, 8, 0x00c0 + lwz 9, 0(8) + ori 9, 9, 0x20 + stw 9, 0(8) + + b _zimage_start_lib + diff --git a/arch/powerpc/boot/wii.c b/arch/powerpc/boot/wii.c new file mode 100644 index 00000000000..2ebaec0344d --- /dev/null +++ b/arch/powerpc/boot/wii.c @@ -0,0 +1,158 @@ +/* + * arch/powerpc/boot/wii.c + * + * Nintendo Wii bootwrapper support + * Copyright (C) 2008-2009 The GameCube Linux Team + * Copyright (C) 2008,2009 Albert Herranz + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + */ + +#include <stddef.h> +#include "stdio.h" +#include "types.h" +#include "io.h" +#include "ops.h" + +#include "ugecon.h" + +BSS_STACK(8192); + +#define HW_REG(x) ((void *)(x)) + +#define EXI_CTRL HW_REG(0x0d800070) +#define EXI_CTRL_ENABLE (1<<0) + +#define MEM2_TOP (0x10000000 + 64*1024*1024) +#define FIRMWARE_DEFAULT_SIZE (12*1024*1024) + + +struct mipc_infohdr { + char magic[3]; + u8 version; + u32 mem2_boundary; + u32 ipc_in; + size_t ipc_in_size; + u32 ipc_out; + size_t ipc_out_size; +}; + +static int mipc_check_address(u32 pa) +{ + /* only MEM2 addresses */ + if (pa < 0x10000000 || pa > 0x14000000) + return -EINVAL; + return 0; +} + +static struct mipc_infohdr *mipc_get_infohdr(void) +{ + struct mipc_infohdr **hdrp, *hdr; + + /* 'mini' header pointer is the last word of MEM2 memory */ + hdrp = (struct mipc_infohdr **)0x13fffffc; + if (mipc_check_address((u32)hdrp)) { + printf("mini: invalid hdrp %08X\n", (u32)hdrp); + hdr = NULL; + goto out; + } + + hdr = *hdrp; + if (mipc_check_address((u32)hdr)) { + printf("mini: invalid hdr %08X\n", (u32)hdr); + hdr = NULL; + goto out; + } + if (memcmp(hdr->magic, "IPC", 3)) { + printf("mini: invalid magic\n"); + hdr = NULL; + goto out; + } + +out: + return hdr; +} + +static int mipc_get_mem2_boundary(u32 *mem2_boundary) +{ + struct mipc_infohdr *hdr; + int error; + + hdr = mipc_get_infohdr(); + if (!hdr) { + error = -1; + goto out; + } + + if (mipc_check_address(hdr->mem2_boundary)) { + printf("mini: invalid mem2_boundary %08X\n", + hdr->mem2_boundary); + error = -EINVAL; + goto out; + } + *mem2_boundary = hdr->mem2_boundary; + error = 0; +out: + return error; + +} + +static void platform_fixups(void) +{ + void *mem; + u32 reg[4]; + u32 mem2_boundary; + int len; + int error; + + mem = finddevice("/memory"); + if (!mem) + fatal("Can't find memory node\n"); + + /* two ranges of (address, size) words */ + len = getprop(mem, "reg", reg, sizeof(reg)); + if (len != sizeof(reg)) { + /* nothing to do */ + goto out; + } + + /* retrieve MEM2 boundary from 'mini' */ + error = mipc_get_mem2_boundary(&mem2_boundary); + if (error) { + /* if that fails use a sane value */ + mem2_boundary = MEM2_TOP - FIRMWARE_DEFAULT_SIZE; + } + + if (mem2_boundary > reg[2] && mem2_boundary < reg[2] + reg[3]) { + reg[3] = mem2_boundary - reg[2]; + printf("top of MEM2 @ %08X\n", reg[2] + reg[3]); + setprop(mem, "reg", reg, sizeof(reg)); + } + +out: + return; +} + +void platform_init(unsigned long r3, unsigned long r4, unsigned long r5) +{ + u32 heapsize = 24*1024*1024 - (u32)_end; + + simple_alloc_init(_end, heapsize, 32, 64); + fdt_init(_dtb_start); + + /* + * 'mini' boots the Broadway processor with EXI disabled. + * We need it enabled before probing for the USB Gecko. + */ + out_be32(EXI_CTRL, in_be32(EXI_CTRL) | EXI_CTRL_ENABLE); + + if (ug_probe()) + console_ops.write = ug_console_write; + + platform_ops.fixups = platform_fixups; +} + diff --git a/arch/powerpc/boot/wrapper b/arch/powerpc/boot/wrapper index ac9e9a58b2b..390512ae7f8 100755 --- a/arch/powerpc/boot/wrapper +++ b/arch/powerpc/boot/wrapper @@ -230,6 +230,10 @@ xpedite52*) link_address='0x1400000' platformo=$object/cuboot-85xx.o ;; +gamecube|wii) + link_address='0x600000' + platformo="$object/$platform-head.o $object/$platform.o" + ;; esac vmz="$tmpdir/`basename \"$kernel\"`.$ext" diff --git a/arch/powerpc/configs/gamecube_defconfig b/arch/powerpc/configs/gamecube_defconfig new file mode 100644 index 00000000000..942e1193e9e --- /dev/null +++ b/arch/powerpc/configs/gamecube_defconfig @@ -0,0 +1,1061 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.32-rc8 +# Sun Nov 22 21:07:30 2009 +# +# CONFIG_PPC64 is not set + +# +# Processor support +# +CONFIG_PPC_BOOK3S_32=y +# CONFIG_PPC_85xx is not set +# CONFIG_PPC_8xx is not set +# CONFIG_40x is not set +# CONFIG_44x is not set +# CONFIG_E200 is not set +CONFIG_PPC_BOOK3S=y +CONFIG_6xx=y +CONFIG_PPC_FPU=y +# CONFIG_ALTIVEC is not set +CONFIG_PPC_STD_MMU=y +CONFIG_PPC_STD_MMU_32=y +# CONFIG_PPC_MM_SLICES is not set +CONFIG_PPC_HAVE_PMU_SUPPORT=y +CONFIG_PPC_PERF_CTRS=y +# CONFIG_SMP is not set +CONFIG_NOT_COHERENT_CACHE=y +CONFIG_PPC32=y +CONFIG_WORD_SIZE=32 +# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set +CONFIG_MMU=y +CONFIG_GENERIC_CMOS_UPDATE=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_TIME_VSYSCALL=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set +CONFIG_IRQ_PER_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_ARCH_HAS_ILOG2_U32=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +# CONFIG_ARCH_NO_VIRT_TO_BUS is not set +CONFIG_PPC=y +CONFIG_EARLY_PRINTK=y +CONFIG_GENERIC_NVRAM=y +CONFIG_SCHED_OMIT_FRAME_POINTER=y +CONFIG_ARCH_MAY_HAVE_PC_FDC=y +CONFIG_PPC_OF=y +CONFIG_OF=y +# CONFIG_PPC_UDBG_16550 is not set +# CONFIG_GENERIC_TBSYNC is not set +CONFIG_AUDIT_ARCH=y +CONFIG_GENERIC_BUG=y +CONFIG_DTC=y +# CONFIG_DEFAULT_UIMAGE is not set +# CONFIG_PPC_DCR_NATIVE is not set +# CONFIG_PPC_DCR_MMIO is not set +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="-gcn" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set +# CONFIG_TREE_RCU_TRACE is not set +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_GROUP_SCHED=y +CONFIG_FAIR_GROUP_SCHED=y +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set +# CONFIG_CGROUPS is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y +CONFIG_EMBEDDED=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +CONFIG_KALLSYMS_ALL=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +# CONFIG_ELF_CORE is not set +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_AIO=y +CONFIG_HAVE_PERF_EVENTS=y + +# +# Kernel Performance Events And Counters +# +CONFIG_PERF_EVENTS=y +CONFIG_EVENT_PROFILE=y +CONFIG_PERF_COUNTERS=y +# CONFIG_DEBUG_PERF_USE_VMALLOC is not set +# CONFIG_VM_EVENT_COUNTERS is not set +CONFIG_COMPAT_BRK=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +CONFIG_TRACEPOINTS=y +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y +CONFIG_HAVE_IOREMAP_PROT=y +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y +CONFIG_HAVE_DMA_API_DEBUG=y + +# +# GCOV-based kernel profiling +# +# CONFIG_GCOV_KERNEL is not set +CONFIG_SLOW_WORK=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_BLOCK=y +CONFIG_LBDAF=y +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" +# CONFIG_FREEZER is not set + +# +# Platform support +# +# CONFIG_PPC_CHRP is not set +# CONFIG_MPC5121_ADS is not set +# CONFIG_MPC5121_GENERIC is not set +# CONFIG_PPC_MPC52xx is not set +# CONFIG_PPC_PMAC is not set +# CONFIG_PPC_CELL is not set +# CONFIG_PPC_CELL_NATIVE is not set +# CONFIG_PPC_82xx is not set +# CONFIG_PQ2ADS is not set +# CONFIG_PPC_83xx is not set +# CONFIG_PPC_86xx is not set +CONFIG_EMBEDDED6xx=y +# CONFIG_LINKSTATION is not set +# CONFIG_STORCENTER is not set +# CONFIG_MPC7448HPC2 is not set +# CONFIG_PPC_HOLLY is not set +# CONFIG_PPC_PRPMC2800 is not set +# CONFIG_PPC_C2K is not set +CONFIG_GAMECUBE_COMMON=y +CONFIG_USBGECKO_UDBG=y +CONFIG_FLIPPER_PIC=y +CONFIG_GAMECUBE=y +# CONFIG_WII is not set +# CONFIG_AMIGAONE is not set +# CONFIG_PPC_OF_BOOT_TRAMPOLINE is not set +# CONFIG_IPIC is not set +# CONFIG_MPIC is not set +# CONFIG_MPIC_WEIRD is not set +# CONFIG_PPC_I8259 is not set +# CONFIG_PPC_RTAS is not set +# CONFIG_MMIO_NVRAM is not set +# CONFIG_PPC_MPC106 is not set +# CONFIG_PPC_970_NAP is not set +# CONFIG_PPC_INDIRECT_IO is not set +# CONFIG_GENERIC_IOMAP is not set +# CONFIG_CPU_FREQ is not set +# CONFIG_TAU is not set +# CONFIG_FSL_ULI1575 is not set +# CONFIG_SIMPLE_GPIO is not set + +# +# Kernel options +# +# CONFIG_HIGHMEM is not set +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_300 is not set +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +# CONFIG_SCHED_HRTICK is not set +# CONFIG_PREEMPT_NONE is not set +# CONFIG_PREEMPT_VOLUNTARY is not set +CONFIG_PREEMPT=y +CONFIG_BINFMT_ELF=y +# CONFIG_HAVE_AOUT is not set +CONFIG_BINFMT_MISC=m +# CONFIG_IOMMU_HELPER is not set +# CONFIG_SWIOTLB is not set +CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +CONFIG_ARCH_HAS_WALK_MEMORY=y +CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y +CONFIG_KEXEC=y +# CONFIG_CRASH_DUMP is not set +CONFIG_MAX_ACTIVE_REGIONS=32 +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_MIGRATION is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 +CONFIG_PPC_4K_PAGES=y +# CONFIG_PPC_16K_PAGES is not set +# CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set +CONFIG_FORCE_MAX_ZONEORDER=11 +CONFIG_PROC_DEVICETREE=y +# CONFIG_CMDLINE_BOOL is not set +CONFIG_EXTRA_TARGETS="" +# CONFIG_PM is not set +# CONFIG_SECCOMP is not set +CONFIG_ISA_DMA_API=y + +# +# Bus options +# +CONFIG_ZONE_DMA=y +CONFIG_GENERIC_ISA_DMA=y +# CONFIG_PCI is not set +# CONFIG_PCI_DOMAINS is not set +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set +# CONFIG_HAS_RAPIDIO is not set + +# +# Advanced setup +# +CONFIG_ADVANCED_OPTIONS=y +# CONFIG_LOWMEM_SIZE_BOOL is not set +CONFIG_LOWMEM_SIZE=0x30000000 +# CONFIG_PAGE_OFFSET_BOOL is not set +CONFIG_PAGE_OFFSET=0xc0000000 +# CONFIG_KERNEL_START_BOOL is not set +CONFIG_KERNEL_START=0xc0000000 +CONFIG_PHYSICAL_START=0x00000000 +# CONFIG_TASK_SIZE_BOOL is not set +CONFIG_TASK_SIZE=0xc0000000 +# CONFIG_CONSISTENT_SIZE_BOOL is not set +CONFIG_CONSISTENT_SIZE=0x00200000 +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +# CONFIG_IP_PNP_BOOTP is not set +CONFIG_IP_PNP_RARP=y +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set +# CONFIG_INET_DIAG is not set +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set +# CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_NET_DROP_MONITOR is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set +# CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set +# CONFIG_STANDALONE is not set +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +# CONFIG_MTD is not set +CONFIG_OF_DEVICE=y +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_FD is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +CONFIG_BLK_DEV_NBD=m +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=2 +CONFIG_BLK_DEV_RAM_SIZE=4096 +# CONFIG_BLK_DEV_XIP is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set +CONFIG_MISC_DEVICES=y +# CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_93CX6 is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +# CONFIG_MACINTOSH_DRIVERS is not set +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +# CONFIG_PHYLIB is not set +CONFIG_NET_ETHERNET=y +# CONFIG_MII is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set +# CONFIG_B44 is not set +# CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set +# CONFIG_XILINX_EMACLITE is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set +# CONFIG_WLAN is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y +CONFIG_INPUT_FF_MEMLESS=m +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +CONFIG_INPUT_JOYDEV=y +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ATKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_OPENCORES is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_INPUT_MOUSE is not set +CONFIG_INPUT_JOYSTICK=y +# CONFIG_JOYSTICK_ANALOG is not set +# CONFIG_JOYSTICK_A3D is not set +# CONFIG_JOYSTICK_ADI is not set +# CONFIG_JOYSTICK_COBRA is not set +# CONFIG_JOYSTICK_GF2K is not set +# CONFIG_JOYSTICK_GRIP is not set +# CONFIG_JOYSTICK_GRIP_MP is not set +# CONFIG_JOYSTICK_GUILLEMOT is not set +# CONFIG_JOYSTICK_INTERACT is not set +# CONFIG_JOYSTICK_SIDEWINDER is not set +# CONFIG_JOYSTICK_TMDC is not set +# CONFIG_JOYSTICK_IFORCE is not set +# CONFIG_JOYSTICK_WARRIOR is not set +# CONFIG_JOYSTICK_MAGELLAN is not set +# CONFIG_JOYSTICK_SPACEORB is not set +# CONFIG_JOYSTICK_SPACEBALL is not set +# CONFIG_JOYSTICK_STINGER is not set +# CONFIG_JOYSTICK_TWIDJOY is not set +# CONFIG_JOYSTICK_ZHENHUA is not set +# CONFIG_JOYSTICK_JOYDUMP is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +# CONFIG_SERIO_I8042 is not set +# CONFIG_SERIO_SERPORT is not set +# CONFIG_SERIO_LIBPS2 is not set +# CONFIG_SERIO_RAW is not set +# CONFIG_SERIO_XILINX_XPS_PS2 is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +# CONFIG_DEVKMEM is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +# CONFIG_SERIAL_UARTLITE is not set +CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=64 +# CONFIG_HVC_UDBG is not set +# CONFIG_IPMI_HANDLER is not set +# CONFIG_HW_RANDOM is not set +# CONFIG_NVRAM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +# CONFIG_I2C is not set +# CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +# CONFIG_GPIOLIB is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_REGULATOR is not set +# CONFIG_MEDIA_SUPPORT is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set +# CONFIG_FB_CFB_FILLRECT is not set +# CONFIG_FB_CFB_COPYAREA is not set +# CONFIG_FB_CFB_IMAGEBLIT is not set +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set +# CONFIG_FB_SYS_FOPS is not set +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_OF is not set +# CONFIG_FB_VGA16 is not set +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_IBM_GXT4500 is not set +# CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set +# CONFIG_FB_BROADSHEET is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set +# CONFIG_FONTS is not set +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y +CONFIG_LOGO=y +# CONFIG_LOGO_LINUX_MONO is not set +# CONFIG_LOGO_LINUX_VGA16 is not set +# CONFIG_LOGO_LINUX_CLUT224 is not set +CONFIG_SOUND=y +CONFIG_SOUND_OSS_CORE=y +CONFIG_SOUND_OSS_CORE_PRECLAIM=y +CONFIG_SND=y +CONFIG_SND_TIMER=y +CONFIG_SND_PCM=y +CONFIG_SND_SEQUENCER=y +# CONFIG_SND_SEQ_DUMMY is not set +CONFIG_SND_OSSEMUL=y +CONFIG_SND_MIXER_OSS=y +CONFIG_SND_PCM_OSS=y +CONFIG_SND_PCM_OSS_PLUGINS=y +CONFIG_SND_SEQUENCER_OSS=y +# CONFIG_SND_DYNAMIC_MINORS is not set +CONFIG_SND_SUPPORT_OLD_API=y +# CONFIG_SND_VERBOSE_PROCFS is not set +# CONFIG_SND_VERBOSE_PRINTK is not set +# CONFIG_SND_DEBUG is not set +# CONFIG_SND_RAWMIDI_SEQ is not set +# CONFIG_SND_OPL3_LIB_SEQ is not set +# CONFIG_SND_OPL4_LIB_SEQ is not set +# CONFIG_SND_SBAWE_SEQ is not set +# CONFIG_SND_EMU10K1_SEQ is not set +CONFIG_SND_DRIVERS=y +# CONFIG_SND_DUMMY is not set +# CONFIG_SND_VIRMIDI is not set +# CONFIG_SND_MTPAV is not set +# CONFIG_SND_SERIAL_U16550 is not set +# CONFIG_SND_MPU401 is not set +CONFIG_SND_PPC=y +# CONFIG_SND_SOC is not set +# CONFIG_SOUND_PRIME is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +# CONFIG_HIDRAW is not set +# CONFIG_HID_PID is not set + +# +# Special HID drivers +# +# CONFIG_USB_SUPPORT is not set +# CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set +# CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set +# CONFIG_EDAC is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# SPI RTC drivers +# + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1286 is not set +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +CONFIG_RTC_DRV_GENERIC=y +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set +# CONFIG_UIO is not set + +# +# TI VLYNQ +# +# CONFIG_STAGING is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set +# CONFIG_EXT3_FS_XATTR is not set +# CONFIG_EXT4_FS is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y +CONFIG_DNOTIFY=y +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# Caches +# +# CONFIG_FSCACHE is not set + +# +# CD-ROM/DVD Filesystems +# +CONFIG_ISO9660_FS=y +CONFIG_JOLIET=y +# CONFIG_ZISOFS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y +# CONFIG_PROC_PAGE_MONITOR is not set +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set +CONFIG_MISC_FILESYSTEMS=y +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +# CONFIG_NFS_V4 is not set +CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +CONFIG_CIFS=y +# CONFIG_CIFS_STATS is not set +# CONFIG_CIFS_WEAK_PW_HASH is not set +# CONFIG_CIFS_XATTR is not set +# CONFIG_CIFS_DEBUG2 is not set +# CONFIG_CIFS_EXPERIMENTAL is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set +# CONFIG_DLM is not set +CONFIG_BINARY_PRINTF=y + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y +CONFIG_CRC_CCITT=y +# CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_DECOMPRESS_GZIP=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y +CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y + +# +# Kernel hacking +# +CONFIG_PRINTK_TIME=y +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_STRIP_ASM_SYMS is not set +# CONFIG_UNUSED_SYMBOLS is not set +CONFIG_DEBUG_FS=y +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +# CONFIG_DETECT_HUNG_TASK is not set +CONFIG_SCHED_DEBUG=y +CONFIG_SCHEDSTATS=y +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_KMEMLEAK is not set +CONFIG_DEBUG_PREEMPT=y +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +CONFIG_DEBUG_SPINLOCK=y +CONFIG_DEBUG_MUTEXES=y +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +CONFIG_DEBUG_SPINLOCK_SLEEP=y +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +CONFIG_STACKTRACE=y +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_BUGVERBOSE=y +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set +# CONFIG_FAULT_INJECTION is not set +CONFIG_LATENCYTOP=y +CONFIG_SYSCTL_SYSCALL_CHECK=y +# CONFIG_DEBUG_PAGEALLOC is not set +CONFIG_NOP_TRACER=y +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACER_MAX_TRACE=y +CONFIG_RING_BUFFER=y +CONFIG_EVENT_TRACING=y +CONFIG_CONTEXT_SWITCH_TRACER=y +CONFIG_TRACING=y +CONFIG_GENERIC_TRACER=y +CONFIG_TRACING_SUPPORT=y +CONFIG_FTRACE=y +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_PREEMPT_TRACER is not set +CONFIG_SCHED_TRACER=y +CONFIG_BOOT_TRACER=y +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_FTRACE_STARTUP_TEST is not set +# CONFIG_RING_BUFFER_BENCHMARK is not set +# CONFIG_DYNAMIC_DEBUG is not set +CONFIG_DMA_API_DEBUG=y +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set +# CONFIG_PPC_DISABLE_WERROR is not set +CONFIG_PPC_WERROR=y +CONFIG_PRINT_STACK_DEPTH=64 +# CONFIG_DEBUG_STACKOVERFLOW is not set +# CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_PPC_EMULATED_STATS is not set +# CONFIG_CODE_PATCHING_SELFTEST is not set +# CONFIG_FTR_FIXUP_SELFTEST is not set +# CONFIG_MSI_BITMAP_SELFTEST is not set +# CONFIG_XMON is not set +# CONFIG_IRQSTACKS is not set +# CONFIG_VIRQ_DEBUG is not set +# CONFIG_BDI_SWITCH is not set +# CONFIG_BOOTX_TEXT is not set +CONFIG_PPC_EARLY_DEBUG=y +# CONFIG_PPC_EARLY_DEBUG_LPAR is not set +# CONFIG_PPC_EARLY_DEBUG_G5 is not set +# CONFIG_PPC_EARLY_DEBUG_RTAS_PANEL is not set +# CONFIG_PPC_EARLY_DEBUG_RTAS_CONSOLE is not set +# CONFIG_PPC_EARLY_DEBUG_MAPLE is not set +# CONFIG_PPC_EARLY_DEBUG_ISERIES is not set +# CONFIG_PPC_EARLY_DEBUG_PAS_REALMODE is not set +# CONFIG_PPC_EARLY_DEBUG_BEAT is not set +# CONFIG_PPC_EARLY_DEBUG_44x is not set +# CONFIG_PPC_EARLY_DEBUG_40x is not set +# CONFIG_PPC_EARLY_DEBUG_CPM is not set +CONFIG_PPC_EARLY_DEBUG_USBGECKO=y + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_CRYPTO is not set +# CONFIG_PPC_CLOCK is not set +# CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/wii_defconfig b/arch/powerpc/configs/wii_defconfig new file mode 100644 index 00000000000..c386828c639 --- /dev/null +++ b/arch/powerpc/configs/wii_defconfig @@ -0,0 +1,1406 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.32-rc8 +# Sun Nov 22 20:37:21 2009 +# +# CONFIG_PPC64 is not set + +# +# Processor support +# +CONFIG_PPC_BOOK3S_32=y +# CONFIG_PPC_85xx is not set +# CONFIG_PPC_8xx is not set +# CONFIG_40x is not set +# CONFIG_44x is not set +# CONFIG_E200 is not set +CONFIG_PPC_BOOK3S=y +CONFIG_6xx=y +CONFIG_PPC_FPU=y +# CONFIG_ALTIVEC is not set +CONFIG_PPC_STD_MMU=y +CONFIG_PPC_STD_MMU_32=y +# CONFIG_PPC_MM_SLICES is not set +CONFIG_PPC_HAVE_PMU_SUPPORT=y +CONFIG_PPC_PERF_CTRS=y +# CONFIG_SMP is not set +CONFIG_NOT_COHERENT_CACHE=y +CONFIG_PPC32=y +CONFIG_WORD_SIZE=32 +# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set +CONFIG_MMU=y +CONFIG_GENERIC_CMOS_UPDATE=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_TIME_VSYSCALL=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set +CONFIG_IRQ_PER_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_ARCH_HAS_ILOG2_U32=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_GPIO=y +# CONFIG_ARCH_NO_VIRT_TO_BUS is not set +CONFIG_PPC=y +CONFIG_EARLY_PRINTK=y +CONFIG_GENERIC_NVRAM=y +CONFIG_SCHED_OMIT_FRAME_POINTER=y +CONFIG_ARCH_MAY_HAVE_PC_FDC=y +CONFIG_PPC_OF=y +CONFIG_OF=y +# CONFIG_PPC_UDBG_16550 is not set +# CONFIG_GENERIC_TBSYNC is not set +CONFIG_AUDIT_ARCH=y +CONFIG_GENERIC_BUG=y +CONFIG_DTC=y +# CONFIG_DEFAULT_UIMAGE is not set +# CONFIG_PPC_DCR_NATIVE is not set +# CONFIG_PPC_DCR_MMIO is not set +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="-wii" +# CONFIG_LOCALVERSION_AUTO is not set +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set +# CONFIG_TREE_RCU_TRACE is not set +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_GROUP_SCHED=y +CONFIG_FAIR_GROUP_SCHED=y +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set +# CONFIG_CGROUPS is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +CONFIG_RELAY=y +# CONFIG_NAMESPACES is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y +CONFIG_EMBEDDED=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +CONFIG_KALLSYMS_ALL=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +# CONFIG_ELF_CORE is not set +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_AIO=y +CONFIG_HAVE_PERF_EVENTS=y + +# +# Kernel Performance Events And Counters +# +CONFIG_PERF_EVENTS=y +CONFIG_EVENT_PROFILE=y +CONFIG_PERF_COUNTERS=y +# CONFIG_DEBUG_PERF_USE_VMALLOC is not set +# CONFIG_VM_EVENT_COUNTERS is not set +CONFIG_COMPAT_BRK=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +CONFIG_TRACEPOINTS=y +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y +CONFIG_HAVE_IOREMAP_PROT=y +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y +CONFIG_HAVE_DMA_API_DEBUG=y + +# +# GCOV-based kernel profiling +# +# CONFIG_GCOV_KERNEL is not set +CONFIG_SLOW_WORK=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_BLOCK=y +CONFIG_LBDAF=y +CONFIG_BLK_DEV_BSG=y +# CONFIG_BLK_DEV_INTEGRITY is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" +# CONFIG_FREEZER is not set + +# +# Platform support +# +# CONFIG_PPC_CHRP is not set +# CONFIG_MPC5121_ADS is not set +# CONFIG_MPC5121_GENERIC is not set +# CONFIG_PPC_MPC52xx is not set +# CONFIG_PPC_PMAC is not set +# CONFIG_PPC_CELL is not set +# CONFIG_PPC_CELL_NATIVE is not set +# CONFIG_PPC_82xx is not set +# CONFIG_PQ2ADS is not set +# CONFIG_PPC_83xx is not set +# CONFIG_PPC_86xx is not set +CONFIG_EMBEDDED6xx=y +# CONFIG_LINKSTATION is not set +# CONFIG_STORCENTER is not set +# CONFIG_MPC7448HPC2 is not set +# CONFIG_PPC_HOLLY is not set +# CONFIG_PPC_PRPMC2800 is not set +# CONFIG_PPC_C2K is not set +CONFIG_GAMECUBE_COMMON=y +CONFIG_USBGECKO_UDBG=y +CONFIG_FLIPPER_PIC=y +# CONFIG_GAMECUBE is not set +CONFIG_HLWD_PIC=y +CONFIG_STARLET_MINI=y +CONFIG_WII=y +# CONFIG_AMIGAONE is not set +# CONFIG_PPC_OF_BOOT_TRAMPOLINE is not set +# CONFIG_IPIC is not set +# CONFIG_MPIC is not set +# CONFIG_MPIC_WEIRD is not set +# CONFIG_PPC_I8259 is not set +# CONFIG_PPC_RTAS is not set +# CONFIG_MMIO_NVRAM is not set +# CONFIG_PPC_MPC106 is not set +# CONFIG_PPC_970_NAP is not set +# CONFIG_PPC_INDIRECT_IO is not set +# CONFIG_GENERIC_IOMAP is not set +# CONFIG_CPU_FREQ is not set +# CONFIG_TAU is not set +# CONFIG_FSL_ULI1575 is not set +# CONFIG_SIMPLE_GPIO is not set + +# +# Kernel options +# +# CONFIG_HIGHMEM is not set +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_300 is not set +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +# CONFIG_SCHED_HRTICK is not set +# CONFIG_PREEMPT_NONE is not set +# CONFIG_PREEMPT_VOLUNTARY is not set +CONFIG_PREEMPT=y +CONFIG_BINFMT_ELF=y +# CONFIG_HAVE_AOUT is not set +CONFIG_BINFMT_MISC=m +# CONFIG_IOMMU_HELPER is not set +# CONFIG_SWIOTLB is not set +CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +CONFIG_ARCH_HAS_WALK_MEMORY=y +CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y +CONFIG_KEXEC=y +# CONFIG_CRASH_DUMP is not set +CONFIG_MAX_ACTIVE_REGIONS=32 +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_MIGRATION is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 +CONFIG_PPC_4K_PAGES=y +# CONFIG_PPC_16K_PAGES is not set +# CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set +CONFIG_FORCE_MAX_ZONEORDER=11 +CONFIG_PROC_DEVICETREE=y +# CONFIG_CMDLINE_BOOL is not set +CONFIG_EXTRA_TARGETS="" +# CONFIG_PM is not set +# CONFIG_SECCOMP is not set +CONFIG_ISA_DMA_API=y + +# +# Bus options +# +CONFIG_ZONE_DMA=y +CONFIG_GENERIC_ISA_DMA=y +# CONFIG_PCI is not set +# CONFIG_PCI_DOMAINS is not set +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set +# CONFIG_HAS_RAPIDIO is not set + +# +# Advanced setup +# +CONFIG_ADVANCED_OPTIONS=y +# CONFIG_LOWMEM_SIZE_BOOL is not set +CONFIG_LOWMEM_SIZE=0x30000000 +# CONFIG_PAGE_OFFSET_BOOL is not set +CONFIG_PAGE_OFFSET=0xc0000000 +# CONFIG_KERNEL_START_BOOL is not set +CONFIG_KERNEL_START=0xc0000000 +CONFIG_PHYSICAL_START=0x00000000 +# CONFIG_TASK_SIZE_BOOL is not set +CONFIG_TASK_SIZE=0xc0000000 +# CONFIG_CONSISTENT_SIZE_BOOL is not set +CONFIG_CONSISTENT_SIZE=0x00200000 +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +# CONFIG_IP_PNP_BOOTP is not set +CONFIG_IP_PNP_RARP=y +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set +# CONFIG_INET_DIAG is not set +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set +# CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_NET_DROP_MONITOR is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +CONFIG_BT=y +CONFIG_BT_L2CAP=y +# CONFIG_BT_SCO is not set +CONFIG_BT_RFCOMM=y +# CONFIG_BT_RFCOMM_TTY is not set +CONFIG_BT_BNEP=y +CONFIG_BT_BNEP_MC_FILTER=y +# CONFIG_BT_BNEP_PROTO_FILTER is not set +CONFIG_BT_HIDP=y + +# +# Bluetooth device drivers +# +# CONFIG_BT_HCIBTSDIO is not set +# CONFIG_BT_HCIUART is not set +# CONFIG_BT_HCIVHCI is not set +# CONFIG_BT_MRVL is not set +# CONFIG_AF_RXRPC is not set +CONFIG_WIRELESS=y +CONFIG_CFG80211=y +# CONFIG_NL80211_TESTMODE is not set +# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set +# CONFIG_CFG80211_REG_DEBUG is not set +CONFIG_CFG80211_DEFAULT_PS=y +CONFIG_CFG80211_DEFAULT_PS_VALUE=1 +# CONFIG_CFG80211_DEBUGFS is not set +CONFIG_WIRELESS_OLD_REGULATORY=y +CONFIG_WIRELESS_EXT=y +CONFIG_WIRELESS_EXT_SYSFS=y +# CONFIG_LIB80211 is not set +CONFIG_MAC80211=y +# CONFIG_MAC80211_RC_PID is not set +CONFIG_MAC80211_RC_MINSTREL=y +# CONFIG_MAC80211_RC_DEFAULT_PID is not set +CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y +CONFIG_MAC80211_RC_DEFAULT="minstrel" +# CONFIG_MAC80211_MESH is not set +# CONFIG_MAC80211_LEDS is not set +# CONFIG_MAC80211_DEBUGFS is not set +# CONFIG_MAC80211_DEBUG_MENU is not set +# CONFIG_WIMAX is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set +# CONFIG_STANDALONE is not set +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +# CONFIG_FIRMWARE_IN_KERNEL is not set +CONFIG_EXTRA_FIRMWARE="" +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +# CONFIG_MTD is not set +CONFIG_OF_DEVICE=y +CONFIG_OF_GPIO=y +CONFIG_OF_I2C=y +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_FD is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=2 +CONFIG_BLK_DEV_RAM_SIZE=4096 +# CONFIG_BLK_DEV_XIP is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set +CONFIG_MISC_DEVICES=y +# CONFIG_ICS932S401 is not set +# CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_ISL29003 is not set +# CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_MAX6875 is not set +# CONFIG_EEPROM_93CX6 is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set +CONFIG_SCSI_MULTI_LUN=y +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +CONFIG_SCSI_LOWLEVEL=y +# CONFIG_ISCSI_TCP is not set +# CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set +# CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +# CONFIG_MACINTOSH_DRIVERS is not set +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +# CONFIG_PHYLIB is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set +# CONFIG_B44 is not set +# CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set +# CONFIG_XILINX_EMACLITE is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set +CONFIG_WLAN=y +# CONFIG_WLAN_PRE80211 is not set +CONFIG_WLAN_80211=y +# CONFIG_LIBERTAS is not set +# CONFIG_LIBERTAS_THINFIRM is not set +# CONFIG_MAC80211_HWSIM is not set +# CONFIG_P54_COMMON is not set +# CONFIG_ATH_COMMON is not set +# CONFIG_HOSTAP is not set +CONFIG_B43=y +CONFIG_B43_SDIO=y +CONFIG_B43_PIO=y +# CONFIG_B43_PHY_LP is not set +CONFIG_B43_DEBUG=y +# CONFIG_B43_FORCE_PIO is not set +# CONFIG_B43LEGACY is not set +# CONFIG_RT2X00 is not set +# CONFIG_WL12XX is not set +# CONFIG_IWM is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y +CONFIG_INPUT_FF_MEMLESS=m +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_MOUSEDEV_SCREEN_X=640 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=480 +CONFIG_INPUT_JOYDEV=y +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ADP5588 is not set +# CONFIG_KEYBOARD_ATKBD is not set +# CONFIG_QT2160 is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_GPIO is not set +# CONFIG_KEYBOARD_MATRIX is not set +# CONFIG_KEYBOARD_MAX7359 is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_OPENCORES is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +CONFIG_INPUT_MOUSE=y +# CONFIG_MOUSE_PS2 is not set +# CONFIG_MOUSE_SERIAL is not set +# CONFIG_MOUSE_VSXXXAA is not set +# CONFIG_MOUSE_GPIO is not set +# CONFIG_MOUSE_SYNAPTICS_I2C is not set +CONFIG_INPUT_JOYSTICK=y +# CONFIG_JOYSTICK_ANALOG is not set +# CONFIG_JOYSTICK_A3D is not set +# CONFIG_JOYSTICK_ADI is not set +# CONFIG_JOYSTICK_COBRA is not set +# CONFIG_JOYSTICK_GF2K is not set +# CONFIG_JOYSTICK_GRIP is not set +# CONFIG_JOYSTICK_GRIP_MP is not set +# CONFIG_JOYSTICK_GUILLEMOT is not set +# CONFIG_JOYSTICK_INTERACT is not set +# CONFIG_JOYSTICK_SIDEWINDER is not set +# CONFIG_JOYSTICK_TMDC is not set +# CONFIG_JOYSTICK_IFORCE is not set +# CONFIG_JOYSTICK_WARRIOR is not set +# CONFIG_JOYSTICK_MAGELLAN is not set +# CONFIG_JOYSTICK_SPACEORB is not set +# CONFIG_JOYSTICK_SPACEBALL is not set +# CONFIG_JOYSTICK_STINGER is not set +# CONFIG_JOYSTICK_TWIDJOY is not set +# CONFIG_JOYSTICK_ZHENHUA is not set +# CONFIG_JOYSTICK_JOYDUMP is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +CONFIG_INPUT_MISC=y +CONFIG_INPUT_UINPUT=y +# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +# CONFIG_SERIO_I8042 is not set +# CONFIG_SERIO_SERPORT is not set +# CONFIG_SERIO_LIBPS2 is not set +# CONFIG_SERIO_RAW is not set +# CONFIG_SERIO_XILINX_XPS_PS2 is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +# CONFIG_DEVKMEM is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +# CONFIG_SERIAL_UARTLITE is not set +CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=64 +# CONFIG_HVC_UDBG is not set +# CONFIG_IPMI_HANDLER is not set +# CONFIG_HW_RANDOM is not set +CONFIG_NVRAM=y +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_HELPER_AUTO=y +CONFIG_I2C_ALGOBIT=y + +# +# I2C Hardware Bus support +# + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +CONFIG_I2C_GPIO=y +# CONFIG_I2C_MPC is not set +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set + +# +# Other I2C/SMBus bus drivers +# +# CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_DS1682 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set +# CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +CONFIG_GPIOLIB=y +# CONFIG_DEBUG_GPIO is not set +CONFIG_GPIO_SYSFS=y + +# +# Memory mapped GPIO expanders: +# +# CONFIG_GPIO_XILINX is not set + +# +# I2C GPIO expanders: +# +# CONFIG_GPIO_MAX732X is not set +# CONFIG_GPIO_PCA953X is not set +# CONFIG_GPIO_PCF857X is not set + +# +# PCI GPIO expanders: +# + +# +# SPI GPIO expanders: +# + +# +# AC97 GPIO expanders: +# +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +CONFIG_SSB=y +CONFIG_SSB_BLOCKIO=y +CONFIG_SSB_SDIOHOST_POSSIBLE=y +CONFIG_SSB_SDIOHOST=y +# CONFIG_SSB_SILENT is not set +CONFIG_SSB_DEBUG=y + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_TPS65010 is not set +# CONFIG_TWL4030_CORE is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set +# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_PCF50633 is not set +# CONFIG_AB3100_CORE is not set +# CONFIG_REGULATOR is not set +# CONFIG_MEDIA_SUPPORT is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set +# CONFIG_FB_CFB_FILLRECT is not set +# CONFIG_FB_CFB_COPYAREA is not set +# CONFIG_FB_CFB_IMAGEBLIT is not set +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set +# CONFIG_FB_SYS_FOPS is not set +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_OF is not set +# CONFIG_FB_VGA16 is not set +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_IBM_GXT4500 is not set +# CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set +# CONFIG_FB_BROADSHEET is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set +# CONFIG_FONTS is not set +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y +# CONFIG_LOGO is not set +CONFIG_SOUND=y +CONFIG_SOUND_OSS_CORE=y +CONFIG_SOUND_OSS_CORE_PRECLAIM=y +CONFIG_SND=y +CONFIG_SND_TIMER=y +CONFIG_SND_PCM=y +CONFIG_SND_SEQUENCER=y +# CONFIG_SND_SEQ_DUMMY is not set +CONFIG_SND_OSSEMUL=y +CONFIG_SND_MIXER_OSS=y +CONFIG_SND_PCM_OSS=y +CONFIG_SND_PCM_OSS_PLUGINS=y +CONFIG_SND_SEQUENCER_OSS=y +# CONFIG_SND_DYNAMIC_MINORS is not set +CONFIG_SND_SUPPORT_OLD_API=y +# CONFIG_SND_VERBOSE_PROCFS is not set +# CONFIG_SND_VERBOSE_PRINTK is not set +# CONFIG_SND_DEBUG is not set +# CONFIG_SND_RAWMIDI_SEQ is not set +# CONFIG_SND_OPL3_LIB_SEQ is not set +# CONFIG_SND_OPL4_LIB_SEQ is not set +# CONFIG_SND_SBAWE_SEQ is not set +# CONFIG_SND_EMU10K1_SEQ is not set +CONFIG_SND_DRIVERS=y +# CONFIG_SND_DUMMY is not set +# CONFIG_SND_VIRMIDI is not set +# CONFIG_SND_MTPAV is not set +# CONFIG_SND_SERIAL_U16550 is not set +# CONFIG_SND_MPU401 is not set +CONFIG_SND_PPC=y +# CONFIG_SND_SOC is not set +# CONFIG_SOUND_PRIME is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +# CONFIG_HIDRAW is not set +# CONFIG_HID_PID is not set + +# +# Special HID drivers +# +CONFIG_HID_APPLE=m +CONFIG_HID_WACOM=m +CONFIG_USB_SUPPORT=y +# CONFIG_USB_ARCH_HAS_HCD is not set +# CONFIG_USB_ARCH_HAS_OHCI is not set +# CONFIG_USB_ARCH_HAS_EHCI is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set + +# +# Enable Host or Gadget support to see Inventra options +# + +# +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may +# +# CONFIG_USB_GADGET is not set + +# +# OTG and related infrastructure +# +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +# CONFIG_MMC_UNSAFE_RESUME is not set + +# +# MMC/SD/SDIO Card Drivers +# +CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK_BOUNCE=y +# CONFIG_SDIO_UART is not set +# CONFIG_MMC_TEST is not set + +# +# MMC/SD/SDIO Host Controller Drivers +# +CONFIG_MMC_SDHCI=y +# CONFIG_MMC_SDHCI_OF is not set +# CONFIG_MMC_SDHCI_PLTFM is not set +# CONFIG_MMC_WBSD is not set +# CONFIG_MMC_AT91 is not set +# CONFIG_MMC_ATMELMCI is not set +# CONFIG_MEMSTICK is not set +# CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set +# CONFIG_EDAC is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set +# CONFIG_RTC_DRV_RX8581 is not set +# CONFIG_RTC_DRV_RX8025 is not set + +# +# SPI RTC drivers +# + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1286 is not set +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +CONFIG_RTC_DRV_GENERIC=y +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set +# CONFIG_UIO is not set + +# +# TI VLYNQ +# +# CONFIG_STAGING is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set +# CONFIG_EXT3_FS_XATTR is not set +# CONFIG_EXT4_FS is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y +CONFIG_DNOTIFY=y +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +CONFIG_FUSE_FS=m +# CONFIG_CUSE is not set + +# +# Caches +# +# CONFIG_FSCACHE is not set + +# +# CD-ROM/DVD Filesystems +# +CONFIG_ISO9660_FS=y +CONFIG_JOLIET=y +# CONFIG_ZISOFS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y +# CONFIG_PROC_PAGE_MONITOR is not set +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set +CONFIG_MISC_FILESYSTEMS=y +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +# CONFIG_NFS_V4 is not set +CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +CONFIG_CIFS=m +# CONFIG_CIFS_STATS is not set +# CONFIG_CIFS_WEAK_PW_HASH is not set +# CONFIG_CIFS_XATTR is not set +# CONFIG_CIFS_DEBUG2 is not set +# CONFIG_CIFS_EXPERIMENTAL is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set +# CONFIG_DLM is not set +CONFIG_BINARY_PRINTF=y + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y +CONFIG_CRC_CCITT=y +CONFIG_CRC16=y +# CONFIG_CRC_T10DIF is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_DECOMPRESS_GZIP=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y +CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y + +# +# Kernel hacking +# +CONFIG_PRINTK_TIME=y +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 +CONFIG_MAGIC_SYSRQ=y +# CONFIG_STRIP_ASM_SYMS is not set +# CONFIG_UNUSED_SYMBOLS is not set +CONFIG_DEBUG_FS=y +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +# CONFIG_DETECT_HUNG_TASK is not set +CONFIG_SCHED_DEBUG=y +CONFIG_SCHEDSTATS=y +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_KMEMLEAK is not set +CONFIG_DEBUG_PREEMPT=y +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +CONFIG_DEBUG_SPINLOCK=y +CONFIG_DEBUG_MUTEXES=y +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +CONFIG_DEBUG_SPINLOCK_SLEEP=y +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +CONFIG_STACKTRACE=y +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_BUGVERBOSE=y +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set +# CONFIG_FAULT_INJECTION is not set +CONFIG_LATENCYTOP=y +CONFIG_SYSCTL_SYSCALL_CHECK=y +# CONFIG_DEBUG_PAGEALLOC is not set +CONFIG_NOP_TRACER=y +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACER_MAX_TRACE=y +CONFIG_RING_BUFFER=y +CONFIG_EVENT_TRACING=y +CONFIG_CONTEXT_SWITCH_TRACER=y +CONFIG_TRACING=y +CONFIG_GENERIC_TRACER=y +CONFIG_TRACING_SUPPORT=y +CONFIG_FTRACE=y +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_PREEMPT_TRACER is not set +CONFIG_SCHED_TRACER=y +CONFIG_BOOT_TRACER=y +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +CONFIG_BLK_DEV_IO_TRACE=y +# CONFIG_FTRACE_STARTUP_TEST is not set +# CONFIG_RING_BUFFER_BENCHMARK is not set +# CONFIG_DYNAMIC_DEBUG is not set +CONFIG_DMA_API_DEBUG=y +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set +# CONFIG_PPC_DISABLE_WERROR is not set +CONFIG_PPC_WERROR=y +CONFIG_PRINT_STACK_DEPTH=64 +# CONFIG_DEBUG_STACKOVERFLOW is not set +# CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_PPC_EMULATED_STATS is not set +# CONFIG_CODE_PATCHING_SELFTEST is not set +# CONFIG_FTR_FIXUP_SELFTEST is not set +# CONFIG_MSI_BITMAP_SELFTEST is not set +# CONFIG_XMON is not set +# CONFIG_IRQSTACKS is not set +# CONFIG_VIRQ_DEBUG is not set +# CONFIG_BDI_SWITCH is not set +# CONFIG_BOOTX_TEXT is not set +CONFIG_PPC_EARLY_DEBUG=y +# CONFIG_PPC_EARLY_DEBUG_LPAR is not set +# CONFIG_PPC_EARLY_DEBUG_G5 is not set +# CONFIG_PPC_EARLY_DEBUG_RTAS_PANEL is not set +# CONFIG_PPC_EARLY_DEBUG_RTAS_CONSOLE is not set +# CONFIG_PPC_EARLY_DEBUG_MAPLE is not set +# CONFIG_PPC_EARLY_DEBUG_ISERIES is not set +# CONFIG_PPC_EARLY_DEBUG_PAS_REALMODE is not set +# CONFIG_PPC_EARLY_DEBUG_BEAT is not set +# CONFIG_PPC_EARLY_DEBUG_44x is not set +# CONFIG_PPC_EARLY_DEBUG_40x is not set +# CONFIG_PPC_EARLY_DEBUG_CPM is not set +CONFIG_PPC_EARLY_DEBUG_USBGECKO=y + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD2=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=y +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=y +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set +# CONFIG_CRYPTO_MD4 is not set +# CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +CONFIG_CRYPTO_AES=y +# CONFIG_CRYPTO_ANUBIS is not set +CONFIG_CRYPTO_ARC4=y +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set +# CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set +# CONFIG_CRYPTO_HW is not set +# CONFIG_PPC_CLOCK is not set +# CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/include/asm/fixmap.h b/arch/powerpc/include/asm/fixmap.h index f1f4e23a84e..5c2c0233175 100644 --- a/arch/powerpc/include/asm/fixmap.h +++ b/arch/powerpc/include/asm/fixmap.h @@ -44,6 +44,9 @@ */ enum fixed_addresses { FIX_HOLE, + /* reserve the top 128K for early debugging purposes */ + FIX_EARLY_DEBUG_TOP = FIX_HOLE, + FIX_EARLY_DEBUG_BASE = FIX_EARLY_DEBUG_TOP+((128*1024)/PAGE_SIZE)-1, #ifdef CONFIG_HIGHMEM FIX_KMAP_BEGIN, /* reserved pte's for temporary kernel mappings */ FIX_KMAP_END = FIX_KMAP_BEGIN+(KM_TYPE_NR*NR_CPUS)-1, diff --git a/arch/powerpc/include/asm/udbg.h b/arch/powerpc/include/asm/udbg.h index cd21e5e6b04..11ae699135b 100644 --- a/arch/powerpc/include/asm/udbg.h +++ b/arch/powerpc/include/asm/udbg.h @@ -51,6 +51,7 @@ extern void __init udbg_init_btext(void); extern void __init udbg_init_44x_as1(void); extern void __init udbg_init_40x_realmode(void); extern void __init udbg_init_cpm(void); +extern void __init udbg_init_usbgecko(void); #endif /* __KERNEL__ */ #endif /* _ASM_POWERPC_UDBG_H */ diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c index 03c862b6a9c..2fc82bac3bb 100644 --- a/arch/powerpc/kernel/cputable.c +++ b/arch/powerpc/kernel/cputable.c @@ -697,9 +697,9 @@ static struct cpu_spec __initdata cpu_specs[] = { .machine_check = machine_check_generic, .platform = "ppc750", }, - { /* 750CL */ - .pvr_mask = 0xfffff0f0, - .pvr_value = 0x00087010, + { /* 750CL (and "Broadway") */ + .pvr_mask = 0xfffff0e0, + .pvr_value = 0x00087000, .cpu_name = "750CL", .cpu_features = CPU_FTRS_750CL, .cpu_user_features = COMMON_USER | PPC_FEATURE_PPC_LE, diff --git a/arch/powerpc/kernel/head_32.S b/arch/powerpc/kernel/head_32.S index 829c3fe7c5a..e025e89fe93 100644 --- a/arch/powerpc/kernel/head_32.S +++ b/arch/powerpc/kernel/head_32.S @@ -164,6 +164,9 @@ __after_mmu_off: #ifdef CONFIG_PPC_EARLY_DEBUG_CPM bl setup_cpm_bat #endif +#ifdef CONFIG_PPC_EARLY_DEBUG_USBGECKO + bl setup_usbgecko_bat +#endif /* * Call setup_cpu for CPU 0 and initialize 6xx Idle @@ -1203,6 +1206,28 @@ setup_cpm_bat: blr #endif +#ifdef CONFIG_PPC_EARLY_DEBUG_USBGECKO +setup_usbgecko_bat: + /* prepare a BAT for early io */ +#if defined(CONFIG_GAMECUBE) + lis r8, 0x0c00 +#elif defined(CONFIG_WII) + lis r8, 0x0d00 +#else +#error Invalid platform for USB Gecko based early debugging. +#endif + /* + * The virtual address used must match the virtual address + * associated to the fixmap entry FIX_EARLY_DEBUG_BASE. + */ + lis r11, 0xfffe /* top 128K */ + ori r8, r8, 0x002a /* uncached, guarded ,rw */ + ori r11, r11, 0x2 /* 128K, Vs=1, Vp=0 */ + mtspr SPRN_DBAT1L, r8 + mtspr SPRN_DBAT1U, r11 + blr +#endif + #ifdef CONFIG_8260 /* Jump into the system reset for the rom. * We first disable the MMU, and then jump to the ROM reset address. diff --git a/arch/powerpc/kernel/udbg.c b/arch/powerpc/kernel/udbg.c index fc9af47e212..e39cad83c88 100644 --- a/arch/powerpc/kernel/udbg.c +++ b/arch/powerpc/kernel/udbg.c @@ -60,6 +60,8 @@ void __init udbg_early_init(void) udbg_init_40x_realmode(); #elif defined(CONFIG_PPC_EARLY_DEBUG_CPM) udbg_init_cpm(); +#elif defined(CONFIG_PPC_EARLY_DEBUG_USBGECKO) + udbg_init_usbgecko(); #endif #ifdef CONFIG_PPC_EARLY_DEBUG diff --git a/arch/powerpc/mm/40x_mmu.c b/arch/powerpc/mm/40x_mmu.c index f5e7b9ce63d..08dfa8e6d86 100644 --- a/arch/powerpc/mm/40x_mmu.c +++ b/arch/powerpc/mm/40x_mmu.c @@ -91,7 +91,7 @@ void __init MMU_init_hw(void) #define LARGE_PAGE_SIZE_16M (1<<24) #define LARGE_PAGE_SIZE_4M (1<<22) -unsigned long __init mmu_mapin_ram(void) +unsigned long __init mmu_mapin_ram(unsigned long top) { unsigned long v, s, mapped; phys_addr_t p; diff --git a/arch/powerpc/mm/44x_mmu.c b/arch/powerpc/mm/44x_mmu.c index 98052ac9658..3986264b099 100644 --- a/arch/powerpc/mm/44x_mmu.c +++ b/arch/powerpc/mm/44x_mmu.c @@ -88,7 +88,7 @@ void __init MMU_init_hw(void) flush_instruction_cache(); } -unsigned long __init mmu_mapin_ram(void) +unsigned long __init mmu_mapin_ram(unsigned long top) { unsigned long addr; diff --git a/arch/powerpc/mm/fsl_booke_mmu.c b/arch/powerpc/mm/fsl_booke_mmu.c index fcfcb6e976c..c5394728bf2 100644 --- a/arch/powerpc/mm/fsl_booke_mmu.c +++ b/arch/powerpc/mm/fsl_booke_mmu.c @@ -207,7 +207,7 @@ unsigned long map_mem_in_cams(unsigned long ram, int max_cam_idx) return amount_mapped; } -unsigned long __init mmu_mapin_ram(void) +unsigned long __init mmu_mapin_ram(unsigned long top) { return tlbcam_addrs[tlbcam_index - 1].limit - PAGE_OFFSET + 1; } diff --git a/arch/powerpc/mm/init_32.c b/arch/powerpc/mm/init_32.c index 9ddcfb4dc13..4ec900af332 100644 --- a/arch/powerpc/mm/init_32.c +++ b/arch/powerpc/mm/init_32.c @@ -82,6 +82,11 @@ extern struct task_struct *current_set[NR_CPUS]; int __map_without_bats; int __map_without_ltlbs; +/* + * This tells the system to allow ioremapping memory marked as reserved. + */ +int __allow_ioremap_reserved; + /* max amount of low RAM to map in */ unsigned long __max_low_memory = MAX_LOW_MEM; @@ -131,9 +136,13 @@ void __init MMU_init(void) MMU_setup(); if (lmb.memory.cnt > 1) { +#ifndef CONFIG_WII lmb.memory.cnt = 1; lmb_analyze(); printk(KERN_WARNING "Only using first contiguous memory region"); +#else + wii_memory_fixups(); +#endif } total_lowmem = total_memory = lmb_end_of_DRAM() - memstart_addr; diff --git a/arch/powerpc/mm/mmu_decl.h b/arch/powerpc/mm/mmu_decl.h index e27a990af42..d49a77503e1 100644 --- a/arch/powerpc/mm/mmu_decl.h +++ b/arch/powerpc/mm/mmu_decl.h @@ -104,6 +104,7 @@ extern void setbat(int index, unsigned long virt, phys_addr_t phys, unsigned int size, int flags); extern int __map_without_bats; +extern int __allow_ioremap_reserved; extern unsigned long ioremap_base; extern unsigned int rtas_data, rtas_size; @@ -125,24 +126,32 @@ extern phys_addr_t total_lowmem; extern phys_addr_t memstart_addr; extern phys_addr_t lowmem_end_addr; +#ifdef CONFIG_WII +extern unsigned long wii_hole_start; +extern unsigned long wii_hole_size; + +extern unsigned long wii_mmu_mapin_mem2(unsigned long top); +extern void wii_memory_fixups(void); +#endif + /* ...and now those things that may be slightly different between processor * architectures. -- Dan */ #if defined(CONFIG_8xx) #define MMU_init_hw() do { } while(0) -#define mmu_mapin_ram() (0UL) +#define mmu_mapin_ram(top) (0UL) #elif defined(CONFIG_4xx) extern void MMU_init_hw(void); -extern unsigned long mmu_mapin_ram(void); +extern unsigned long mmu_mapin_ram(unsigned long top); #elif defined(CONFIG_FSL_BOOKE) extern void MMU_init_hw(void); -extern unsigned long mmu_mapin_ram(void); +extern unsigned long mmu_mapin_ram(unsigned long top); extern void adjust_total_lowmem(void); #elif defined(CONFIG_PPC32) /* anything 32-bit except 4xx or 8xx */ extern void MMU_init_hw(void); -extern unsigned long mmu_mapin_ram(void); +extern unsigned long mmu_mapin_ram(unsigned long top); #endif diff --git a/arch/powerpc/mm/pgtable_32.c b/arch/powerpc/mm/pgtable_32.c index cb96cb2e17c..177e4038b43 100644 --- a/arch/powerpc/mm/pgtable_32.c +++ b/arch/powerpc/mm/pgtable_32.c @@ -26,6 +26,7 @@ #include <linux/vmalloc.h> #include <linux/init.h> #include <linux/highmem.h> +#include <linux/lmb.h> #include <asm/pgtable.h> #include <asm/pgalloc.h> @@ -191,7 +192,8 @@ __ioremap_caller(phys_addr_t addr, unsigned long size, unsigned long flags, * Don't allow anybody to remap normal RAM that we're using. * mem_init() sets high_memory so only do the check after that. */ - if (mem_init_done && (p < virt_to_phys(high_memory))) { + if (mem_init_done && (p < virt_to_phys(high_memory)) && + !(__allow_ioremap_reserved && lmb_is_region_reserved(p, size))) { printk("__ioremap(): phys addr 0x%llx is RAM lr %p\n", (unsigned long long)p, __builtin_return_address(0)); return NULL; @@ -283,18 +285,18 @@ int map_page(unsigned long va, phys_addr_t pa, int flags) } /* - * Map in a big chunk of physical memory starting at PAGE_OFFSET. + * Map in a chunk of physical memory starting at start. */ -void __init mapin_ram(void) +void __init __mapin_ram_chunk(unsigned long offset, unsigned long top) { unsigned long v, s, f; phys_addr_t p; int ktext; - s = mmu_mapin_ram(); + s = offset; v = PAGE_OFFSET + s; p = memstart_addr + s; - for (; s < total_lowmem; s += PAGE_SIZE) { + for (; s < top; s += PAGE_SIZE) { ktext = ((char *) v >= _stext && (char *) v < etext); f = ktext ? PAGE_KERNEL_TEXT : PAGE_KERNEL; map_page(v, p, f); @@ -307,6 +309,30 @@ void __init mapin_ram(void) } } +void __init mapin_ram(void) +{ + unsigned long s, top; + +#ifndef CONFIG_WII + top = total_lowmem; + s = mmu_mapin_ram(top); + __mapin_ram_chunk(s, top); +#else + if (!wii_hole_size) { + s = mmu_mapin_ram(total_lowmem); + __mapin_ram_chunk(s, total_lowmem); + } else { + top = wii_hole_start; + s = mmu_mapin_ram(top); + __mapin_ram_chunk(s, top); + + top = lmb_end_of_DRAM(); + s = wii_mmu_mapin_mem2(top); + __mapin_ram_chunk(s, top); + } +#endif +} + /* Scan the real Linux page tables and return a PTE pointer for * a virtual address in a context. * Returns true (1) if PTE was found, zero otherwise. The pointer to diff --git a/arch/powerpc/mm/ppc_mmu_32.c b/arch/powerpc/mm/ppc_mmu_32.c index 2d2a87e1015..f11c2cdcb0f 100644 --- a/arch/powerpc/mm/ppc_mmu_32.c +++ b/arch/powerpc/mm/ppc_mmu_32.c @@ -72,7 +72,7 @@ unsigned long p_mapped_by_bats(phys_addr_t pa) return 0; } -unsigned long __init mmu_mapin_ram(void) +unsigned long __init mmu_mapin_ram(unsigned long top) { unsigned long tot, bl, done; unsigned long max_size = (256<<20); @@ -86,7 +86,7 @@ unsigned long __init mmu_mapin_ram(void) /* Make sure we don't map a block larger than the smallest alignment of the physical address. */ - tot = total_lowmem; + tot = top; for (bl = 128<<10; bl < max_size; bl <<= 1) { if (bl * 2 > tot) break; diff --git a/arch/powerpc/platforms/Kconfig.cputype b/arch/powerpc/platforms/Kconfig.cputype index 2eab27a94cc..fa0f690d386 100644 --- a/arch/powerpc/platforms/Kconfig.cputype +++ b/arch/powerpc/platforms/Kconfig.cputype @@ -311,7 +311,7 @@ config NR_CPUS config NOT_COHERENT_CACHE bool - depends on 4xx || 8xx || E200 || PPC_MPC512x + depends on 4xx || 8xx || E200 || PPC_MPC512x || GAMECUBE_COMMON default y config CHECK_CACHE_COHERENCY diff --git a/arch/powerpc/platforms/embedded6xx/Kconfig b/arch/powerpc/platforms/embedded6xx/Kconfig index 291ac9d8cbe..524d971a147 100644 --- a/arch/powerpc/platforms/embedded6xx/Kconfig +++ b/arch/powerpc/platforms/embedded6xx/Kconfig @@ -90,3 +90,36 @@ config MPC10X_OPENPIC config MPC10X_STORE_GATHERING bool "Enable MPC10x store gathering" depends on MPC10X_BRIDGE + +config GAMECUBE_COMMON + bool + +config USBGECKO_UDBG + bool "USB Gecko udbg console for the Nintendo GameCube/Wii" + depends on GAMECUBE_COMMON + help + If you say yes to this option, support will be included for the + USB Gecko adapter as an udbg console. + The USB Gecko is a EXI to USB Serial converter that can be plugged + into a memcard slot in the Nintendo GameCube/Wii. + + This driver bypasses the EXI layer completely. + + If in doubt, say N here. + +config GAMECUBE + bool "Nintendo-GameCube" + depends on EMBEDDED6xx + select GAMECUBE_COMMON + help + Select GAMECUBE if configuring for the Nintendo GameCube. + More information at: <http://gc-linux.sourceforge.net/> + +config WII + bool "Nintendo-Wii" + depends on EMBEDDED6xx + select GAMECUBE_COMMON + help + Select WII if configuring for the Nintendo Wii. + More information at: <http://gc-linux.sourceforge.net/> + diff --git a/arch/powerpc/platforms/embedded6xx/Makefile b/arch/powerpc/platforms/embedded6xx/Makefile index 0773c08bd44..66c23e423f4 100644 --- a/arch/powerpc/platforms/embedded6xx/Makefile +++ b/arch/powerpc/platforms/embedded6xx/Makefile @@ -7,3 +7,7 @@ obj-$(CONFIG_STORCENTER) += storcenter.o obj-$(CONFIG_PPC_HOLLY) += holly.o obj-$(CONFIG_PPC_PRPMC2800) += prpmc2800.o obj-$(CONFIG_PPC_C2K) += c2k.o +obj-$(CONFIG_USBGECKO_UDBG) += usbgecko_udbg.o +obj-$(CONFIG_GAMECUBE_COMMON) += flipper-pic.o +obj-$(CONFIG_GAMECUBE) += gamecube.o +obj-$(CONFIG_WII) += wii.o hlwd-pic.o diff --git a/arch/powerpc/platforms/embedded6xx/flipper-pic.c b/arch/powerpc/platforms/embedded6xx/flipper-pic.c new file mode 100644 index 00000000000..d5963285e3b --- /dev/null +++ b/arch/powerpc/platforms/embedded6xx/flipper-pic.c @@ -0,0 +1,263 @@ +/* + * arch/powerpc/platforms/embedded6xx/flipper-pic.c + * + * Nintendo GameCube/Wii "Flipper" interrupt controller support. + * Copyright (C) 2004-2009 The GameCube Linux Team + * Copyright (C) 2007,2008,2009 Albert Herranz + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + */ +#define DRV_MODULE_NAME "flipper-pic" +#define pr_fmt(fmt) DRV_MODULE_NAME ": " fmt + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/irq.h> +#include <linux/of.h> +#include <asm/io.h> + +#include "flipper-pic.h" + +#define FLIPPER_NR_IRQS 32 + +/* + * Each interrupt has a corresponding bit in both + * the Interrupt Cause (ICR) and Interrupt Mask (IMR) registers. + * + * Enabling/disabling an interrupt line involves setting/clearing + * the corresponding bit in IMR. + * Except for the RSW interrupt, all interrupts get deasserted automatically + * when the source deasserts the interrupt. + */ +#define FLIPPER_ICR 0x00 +#define FLIPPER_ICR_RSS (1<<16) /* reset switch state */ + +#define FLIPPER_IMR 0x04 + +#define FLIPPER_RESET 0x24 + + +/* + * IRQ chip hooks. + * + */ + +static void flipper_pic_mask_and_ack(unsigned int virq) +{ + int irq = virq_to_hw(virq); + void __iomem *io_base = get_irq_chip_data(virq); + u32 mask = 1 << irq; + + clrbits32(io_base + FLIPPER_IMR, mask); + /* this is at least needed for RSW */ + out_be32(io_base + FLIPPER_ICR, mask); +} + +static void flipper_pic_ack(unsigned int virq) +{ + int irq = virq_to_hw(virq); + void __iomem *io_base = get_irq_chip_data(virq); + + /* this is at least needed for RSW */ + out_be32(io_base + FLIPPER_ICR, 1 << irq); +} + +static void flipper_pic_mask(unsigned int virq) +{ + int irq = virq_to_hw(virq); + void __iomem *io_base = get_irq_chip_data(virq); + + clrbits32(io_base + FLIPPER_IMR, 1 << irq); +} + +static void flipper_pic_unmask(unsigned int virq) +{ + int irq = virq_to_hw(virq); + void __iomem *io_base = get_irq_chip_data(virq); + + setbits32(io_base + FLIPPER_IMR, 1 << irq); +} + + +static struct irq_chip flipper_pic = { + .name = "flipper-pic", + .ack = flipper_pic_ack, + .mask_ack = flipper_pic_mask_and_ack, + .mask = flipper_pic_mask, + .unmask = flipper_pic_unmask, +}; + +/* + * IRQ host hooks. + * + */ + +static struct irq_host *flipper_irq_host; + +static int flipper_pic_map(struct irq_host *h, unsigned int virq, + irq_hw_number_t hwirq) +{ + set_irq_chip_data(virq, h->host_data); + get_irq_desc(virq)->status |= IRQ_LEVEL; + set_irq_chip_and_handler(virq, &flipper_pic, handle_level_irq); + return 0; +} + +static void flipper_pic_unmap(struct irq_host *h, unsigned int irq) +{ + set_irq_chip_data(irq, NULL); + set_irq_chip(irq, NULL); +} + +static int flipper_pic_match(struct irq_host *h, struct device_node *np) +{ + return 1; +} + + +static struct irq_host_ops flipper_irq_host_ops = { + .map = flipper_pic_map, + .unmap = flipper_pic_unmap, + .match = flipper_pic_match, +}; + +/* + * Platform hooks. + * + */ + +static void __flipper_quiesce(void __iomem *io_base) +{ + /* mask and ack all IRQs */ + out_be32(io_base + FLIPPER_IMR, 0x00000000); + out_be32(io_base + FLIPPER_ICR, 0xffffffff); +} + +struct irq_host * __init flipper_pic_init(struct device_node *np) +{ + struct device_node *pi; + struct irq_host *irq_host = NULL; + struct resource res; + void __iomem *io_base; + int retval; + + pi = of_get_parent(np); + if (!pi) { + pr_err("no parent found\n"); + goto out; + } + if (!of_device_is_compatible(pi, "nintendo,flipper-pi")) { + pr_err("unexpected parent compatible\n"); + goto out; + } + + retval = of_address_to_resource(pi, 0, &res); + if (retval) { + pr_err("no io memory range found\n"); + goto out; + } + io_base = ioremap(res.start, resource_size(&res)); + + pr_info("controller at 0x%08x mapped to 0x%p\n", res.start, io_base); + + __flipper_quiesce(io_base); + + irq_host = irq_alloc_host(np, IRQ_HOST_MAP_LINEAR, FLIPPER_NR_IRQS, + &flipper_irq_host_ops, -1); + if (!irq_host) { + pr_err("failed to allocate irq_host\n"); + return NULL; + } + + irq_host->host_data = io_base; + +out: + return irq_host; +} + +unsigned int flipper_pic_get_irq(void) +{ + void __iomem *io_base = flipper_irq_host->host_data; + int irq; + u32 irq_status; + + irq_status = in_be32(io_base + FLIPPER_ICR) & + in_be32(io_base + FLIPPER_IMR); + if (irq_status == 0) + return NO_IRQ; /* no more IRQs pending */ + + irq = __ffs(irq_status); + return irq_linear_revmap(flipper_irq_host, irq); +} + +/* + * Probe function. + * + */ + +void __init flipper_pic_probe(void) +{ + struct device_node *np; + + np = of_find_compatible_node(NULL, NULL, "nintendo,flipper-pic"); + BUG_ON(!np); + + flipper_irq_host = flipper_pic_init(np); + BUG_ON(!flipper_irq_host); + + irq_set_default_host(flipper_irq_host); + + of_node_put(np); +} + +/* + * Misc functions related to the flipper chipset. + * + */ + +/** + * flipper_quiesce() - quiesce flipper irq controller + * + * Mask and ack all interrupt sources. + * + */ +void flipper_quiesce(void) +{ + void __iomem *io_base = flipper_irq_host->host_data; + + __flipper_quiesce(io_base); +} + +/* + * Resets the platform. + */ +void flipper_platform_reset(void) +{ + void __iomem *io_base; + + if (flipper_irq_host && flipper_irq_host->host_data) { + io_base = flipper_irq_host->host_data; + out_8(io_base + FLIPPER_RESET, 0x00); + } +} + +/* + * Returns non-zero if the reset button is pressed. + */ +int flipper_is_reset_button_pressed(void) +{ + void __iomem *io_base; + u32 icr; + + if (flipper_irq_host && flipper_irq_host->host_data) { + io_base = flipper_irq_host->host_data; + icr = in_be32(io_base + FLIPPER_ICR); + return !(icr & FLIPPER_ICR_RSS); + } + return 0; +} + diff --git a/arch/powerpc/platforms/embedded6xx/flipper-pic.h b/arch/powerpc/platforms/embedded6xx/flipper-pic.h new file mode 100644 index 00000000000..e339186b566 --- /dev/null +++ b/arch/powerpc/platforms/embedded6xx/flipper-pic.h @@ -0,0 +1,25 @@ +/* + * arch/powerpc/platforms/embedded6xx/flipper-pic.h + * + * Nintendo GameCube/Wii "Flipper" interrupt controller support. + * Copyright (C) 2004-2009 The GameCube Linux Team + * Copyright (C) 2007,2008,2009 Albert Herranz + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + */ + +#ifndef __FLIPPER_PIC_H +#define __FLIPPER_PIC_H + +unsigned int flipper_pic_get_irq(void); +void __init flipper_pic_probe(void); + +void flipper_quiesce(void); +void flipper_platform_reset(void); +int flipper_is_reset_button_pressed(void); + +#endif diff --git a/arch/powerpc/platforms/embedded6xx/gamecube.c b/arch/powerpc/platforms/embedded6xx/gamecube.c new file mode 100644 index 00000000000..1106fd99627 --- /dev/null +++ b/arch/powerpc/platforms/embedded6xx/gamecube.c @@ -0,0 +1,118 @@ +/* + * arch/powerpc/platforms/embedded6xx/gamecube.c + * + * Nintendo GameCube board-specific support + * Copyright (C) 2004-2009 The GameCube Linux Team + * Copyright (C) 2007,2008,2009 Albert Herranz + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/irq.h> +#include <linux/kexec.h> +#include <linux/seq_file.h> +#include <linux/of_platform.h> + +#include <asm/io.h> +#include <asm/machdep.h> +#include <asm/prom.h> +#include <asm/time.h> +#include <asm/udbg.h> + +#include "flipper-pic.h" +#include "usbgecko_udbg.h" + + +static void gamecube_spin(void) +{ + /* spin until power button pressed */ + for (;;) + cpu_relax(); +} + +static void gamecube_restart(char *cmd) +{ + local_irq_disable(); + flipper_platform_reset(); + gamecube_spin(); +} + +static void gamecube_power_off(void) +{ + local_irq_disable(); + gamecube_spin(); +} + +static void gamecube_halt(void) +{ + gamecube_restart(NULL); +} + +static void __init gamecube_init_early(void) +{ + ug_udbg_init(); +} + +static int __init gamecube_probe(void) +{ + unsigned long dt_root; + + dt_root = of_get_flat_dt_root(); + if (!of_flat_dt_is_compatible(dt_root, "nintendo,gamecube")) + return 0; + + return 1; +} + +static void gamecube_shutdown(void) +{ + flipper_quiesce(); +} + +#ifdef CONFIG_KEXEC +static int gamecube_kexec_prepare(struct kimage *image) +{ + return 0; +} +#endif /* CONFIG_KEXEC */ + + +define_machine(gamecube) { + .name = "gamecube", + .probe = gamecube_probe, + .init_early = gamecube_init_early, + .restart = gamecube_restart, + .power_off = gamecube_power_off, + .halt = gamecube_halt, + .init_IRQ = flipper_pic_probe, + .get_irq = flipper_pic_get_irq, + .calibrate_decr = generic_calibrate_decr, + .progress = udbg_progress, + .machine_shutdown = gamecube_shutdown, +#ifdef CONFIG_KEXEC + .machine_kexec_prepare = gamecube_kexec_prepare, +#endif +}; + + +static struct of_device_id gamecube_of_bus[] = { + { .compatible = "nintendo,flipper", }, + { }, +}; + +static int __init gamecube_device_probe(void) +{ + if (!machine_is(gamecube)) + return 0; + + of_platform_bus_probe(NULL, gamecube_of_bus, NULL); + return 0; +} +device_initcall(gamecube_device_probe); + diff --git a/arch/powerpc/platforms/embedded6xx/hlwd-pic.c b/arch/powerpc/platforms/embedded6xx/hlwd-pic.c new file mode 100644 index 00000000000..dd20bff3320 --- /dev/null +++ b/arch/powerpc/platforms/embedded6xx/hlwd-pic.c @@ -0,0 +1,241 @@ +/* + * arch/powerpc/platforms/embedded6xx/hlwd-pic.c + * + * Nintendo Wii "Hollywood" interrupt controller support. + * Copyright (C) 2009 The GameCube Linux Team + * Copyright (C) 2009 Albert Herranz + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + */ +#define DRV_MODULE_NAME "hlwd-pic" +#define pr_fmt(fmt) DRV_MODULE_NAME ": " fmt + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/irq.h> +#include <linux/of.h> +#include <asm/io.h> + +#include "hlwd-pic.h" + +#define HLWD_NR_IRQS 32 + +/* + * Each interrupt has a corresponding bit in both + * the Interrupt Cause (ICR) and Interrupt Mask (IMR) registers. + * + * Enabling/disabling an interrupt line involves asserting/clearing + * the corresponding bit in IMR. ACK'ing a request simply involves + * asserting the corresponding bit in ICR. + */ +#define HW_BROADWAY_ICR 0x00 +#define HW_BROADWAY_IMR 0x04 + + +/* + * IRQ chip hooks. + * + */ + +static void hlwd_pic_mask_and_ack(unsigned int virq) +{ + int irq = virq_to_hw(virq); + void __iomem *io_base = get_irq_chip_data(virq); + u32 mask = 1 << irq; + + clrbits32(io_base + HW_BROADWAY_IMR, mask); + out_be32(io_base + HW_BROADWAY_ICR, mask); +} + +static void hlwd_pic_ack(unsigned int virq) +{ + int irq = virq_to_hw(virq); + void __iomem *io_base = get_irq_chip_data(virq); + + out_be32(io_base + HW_BROADWAY_ICR, 1 << irq); +} + +static void hlwd_pic_mask(unsigned int virq) +{ + int irq = virq_to_hw(virq); + void __iomem *io_base = get_irq_chip_data(virq); + + clrbits32(io_base + HW_BROADWAY_IMR, 1 << irq); +} + +static void hlwd_pic_unmask(unsigned int virq) +{ + int irq = virq_to_hw(virq); + void __iomem *io_base = get_irq_chip_data(virq); + + setbits32(io_base + HW_BROADWAY_IMR, 1 << irq); +} + + +static struct irq_chip hlwd_pic = { + .name = "hlwd-pic", + .ack = hlwd_pic_ack, + .mask_ack = hlwd_pic_mask_and_ack, + .mask = hlwd_pic_mask, + .unmask = hlwd_pic_unmask, +}; + +/* + * IRQ host hooks. + * + */ + +static struct irq_host *hlwd_irq_host; + +static int hlwd_pic_map(struct irq_host *h, unsigned int virq, + irq_hw_number_t hwirq) +{ + set_irq_chip_data(virq, h->host_data); + get_irq_desc(virq)->status |= IRQ_LEVEL; + set_irq_chip_and_handler(virq, &hlwd_pic, handle_level_irq); + return 0; +} + +static void hlwd_pic_unmap(struct irq_host *h, unsigned int irq) +{ + set_irq_chip_data(irq, NULL); + set_irq_chip(irq, NULL); +} + +static struct irq_host_ops hlwd_irq_host_ops = { + .map = hlwd_pic_map, + .unmap = hlwd_pic_unmap, +}; + +static unsigned int __hlwd_pic_get_irq(struct irq_host *h) +{ + void __iomem *io_base = h->host_data; + int irq; + u32 irq_status; + + irq_status = in_be32(io_base + HW_BROADWAY_ICR) & + in_be32(io_base + HW_BROADWAY_IMR); + if (irq_status == 0) + return NO_IRQ; /* no more IRQs pending */ + + irq = __ffs(irq_status); + return irq_linear_revmap(h, irq); +} + +static void hlwd_pic_irq_cascade(unsigned int cascade_virq, + struct irq_desc *desc) +{ + struct irq_host *irq_host = get_irq_data(cascade_virq); + unsigned int virq; + + spin_lock(&desc->lock); + desc->chip->mask(cascade_virq); /* IRQ_LEVEL */ + spin_unlock(&desc->lock); + + virq = __hlwd_pic_get_irq(irq_host); + if (virq != NO_IRQ) + generic_handle_irq(virq); + else + pr_err("spurious interrupt!\n"); + + spin_lock(&desc->lock); + desc->chip->ack(cascade_virq); /* IRQ_LEVEL */ + if (!(desc->status & IRQ_DISABLED) && desc->chip->unmask) + desc->chip->unmask(cascade_virq); + spin_unlock(&desc->lock); +} + +/* + * Platform hooks. + * + */ + +static void __hlwd_quiesce(void __iomem *io_base) +{ + /* mask and ack all IRQs */ + out_be32(io_base + HW_BROADWAY_IMR, 0); + out_be32(io_base + HW_BROADWAY_ICR, 0xffffffff); +} + +struct irq_host *hlwd_pic_init(struct device_node *np) +{ + struct irq_host *irq_host; + struct resource res; + void __iomem *io_base; + int retval; + + retval = of_address_to_resource(np, 0, &res); + if (retval) { + pr_err("no io memory range found\n"); + return NULL; + } + io_base = ioremap(res.start, resource_size(&res)); + if (!io_base) { + pr_err("ioremap failed\n"); + return NULL; + } + + pr_info("controller at 0x%08x mapped to 0x%p\n", res.start, io_base); + + __hlwd_quiesce(io_base); + + irq_host = irq_alloc_host(np, IRQ_HOST_MAP_LINEAR, HLWD_NR_IRQS, + &hlwd_irq_host_ops, -1); + if (!irq_host) { + pr_err("failed to allocate irq_host\n"); + return NULL; + } + irq_host->host_data = io_base; + + return irq_host; +} + +unsigned int hlwd_pic_get_irq(void) +{ + return __hlwd_pic_get_irq(hlwd_irq_host); +} + +/* + * Probe function. + * + */ + +void hlwd_pic_probe(void) +{ + struct irq_host *host; + struct device_node *np; + const u32 *interrupts; + int cascade_virq; + + for_each_compatible_node(np, NULL, "nintendo,hollywood-pic") { + interrupts = of_get_property(np, "interrupts", NULL); + if (interrupts) { + host = hlwd_pic_init(np); + BUG_ON(!host); + cascade_virq = irq_of_parse_and_map(np, 0); + set_irq_data(cascade_virq, host); + set_irq_chained_handler(cascade_virq, + hlwd_pic_irq_cascade); + hlwd_irq_host = host; + break; + } + } +} + +/** + * hlwd_quiesce() - quiesce hollywood irq controller + * + * Mask and ack all interrupt sources. + * + */ +void hlwd_quiesce(void) +{ + void __iomem *io_base = hlwd_irq_host->host_data; + + __hlwd_quiesce(io_base); +} + diff --git a/arch/powerpc/platforms/embedded6xx/hlwd-pic.h b/arch/powerpc/platforms/embedded6xx/hlwd-pic.h new file mode 100644 index 00000000000..d2e5a092761 --- /dev/null +++ b/arch/powerpc/platforms/embedded6xx/hlwd-pic.h @@ -0,0 +1,22 @@ +/* + * arch/powerpc/platforms/embedded6xx/hlwd-pic.h + * + * Nintendo Wii "Hollywood" interrupt controller support. + * Copyright (C) 2009 The GameCube Linux Team + * Copyright (C) 2009 Albert Herranz + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + */ + +#ifndef __HLWD_PIC_H +#define __HLWD_PIC_H + +extern unsigned int hlwd_pic_get_irq(void); +extern void hlwd_pic_probe(void); +extern void hlwd_quiesce(void); + +#endif diff --git a/arch/powerpc/platforms/embedded6xx/usbgecko_udbg.c b/arch/powerpc/platforms/embedded6xx/usbgecko_udbg.c new file mode 100644 index 00000000000..edc956cc8b1 --- /dev/null +++ b/arch/powerpc/platforms/embedded6xx/usbgecko_udbg.c @@ -0,0 +1,328 @@ +/* + * arch/powerpc/platforms/embedded6xx/usbgecko_udbg.c + * + * udbg serial input/output routines for the USB Gecko adapter. + * Copyright (C) 2008-2009 The GameCube Linux Team + * Copyright (C) 2008,2009 Albert Herranz + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + */ + +#include <mm/mmu_decl.h> + +#include <asm/io.h> +#include <asm/prom.h> +#include <asm/udbg.h> +#include <asm/fixmap.h> + +#include "usbgecko_udbg.h" + + +#define EXI_CLK_32MHZ 5 + +#define EXI_CSR 0x00 +#define EXI_CSR_CLKMASK (0x7<<4) +#define EXI_CSR_CLK_32MHZ (EXI_CLK_32MHZ<<4) +#define EXI_CSR_CSMASK (0x7<<7) +#define EXI_CSR_CS_0 (0x1<<7) /* Chip Select 001 */ + +#define EXI_CR 0x0c +#define EXI_CR_TSTART (1<<0) +#define EXI_CR_WRITE (1<<2) +#define EXI_CR_READ_WRITE (2<<2) +#define EXI_CR_TLEN(len) (((len)-1)<<4) + +#define EXI_DATA 0x10 + +#define UG_READ_ATTEMPTS 100 +#define UG_WRITE_ATTEMPTS 100 + + +static void __iomem *ug_io_base; + +/* + * Performs one input/output transaction between the exi host and the usbgecko. + */ +static u32 ug_io_transaction(u32 in) +{ + u32 __iomem *csr_reg = ug_io_base + EXI_CSR; + u32 __iomem *data_reg = ug_io_base + EXI_DATA; + u32 __iomem *cr_reg = ug_io_base + EXI_CR; + u32 csr, data, cr; + + /* select */ + csr = EXI_CSR_CLK_32MHZ | EXI_CSR_CS_0; + out_be32(csr_reg, csr); + + /* read/write */ + data = in; + out_be32(data_reg, data); + cr = EXI_CR_TLEN(2) | EXI_CR_READ_WRITE | EXI_CR_TSTART; + out_be32(cr_reg, cr); + + while (in_be32(cr_reg) & EXI_CR_TSTART) + barrier(); + + /* deselect */ + out_be32(csr_reg, 0); + + /* result */ + data = in_be32(data_reg); + + return data; +} + +/* + * Returns true if an usbgecko adapter is found. + */ +static int ug_is_adapter_present(void) +{ + if (!ug_io_base) + return 0; + + return ug_io_transaction(0x90000000) == 0x04700000; +} + +/* + * Returns true if the TX fifo is ready for transmission. + */ +static int ug_is_txfifo_ready(void) +{ + return ug_io_transaction(0xc0000000) & 0x04000000; +} + +/* + * Tries to transmit a character. + * If the TX fifo is not ready the result is undefined. + */ +static void ug_raw_putc(char ch) +{ + ug_io_transaction(0xb0000000 | (ch << 20)); +} + +/* + * Transmits a character. + * It silently fails if the TX fifo is not ready after a number of retries. + */ +static void ug_putc(char ch) +{ + int count = UG_WRITE_ATTEMPTS; + + if (!ug_io_base) + return; + + if (ch == '\n') + ug_putc('\r'); + + while (!ug_is_txfifo_ready() && count--) + barrier(); + if (count) + ug_raw_putc(ch); +} + +/* + * Returns true if the RX fifo is ready for transmission. + */ +static int ug_is_rxfifo_ready(void) +{ + return ug_io_transaction(0xd0000000) & 0x04000000; +} + +/* + * Tries to receive a character. + * If a character is unavailable the function returns -1. + */ +static int ug_raw_getc(void) +{ + u32 data = ug_io_transaction(0xa0000000); + if (data & 0x08000000) + return (data >> 16) & 0xff; + else + return -1; +} + +/* + * Receives a character. + * It fails if the RX fifo is not ready after a number of retries. + */ +static int ug_getc(void) +{ + int count = UG_READ_ATTEMPTS; + + if (!ug_io_base) + return -1; + + while (!ug_is_rxfifo_ready() && count--) + barrier(); + return ug_raw_getc(); +} + +/* + * udbg functions. + * + */ + +/* + * Transmits a character. + */ +void ug_udbg_putc(char ch) +{ + ug_putc(ch); +} + +/* + * Receives a character. Waits until a character is available. + */ +static int ug_udbg_getc(void) +{ + int ch; + + while ((ch = ug_getc()) == -1) + barrier(); + return ch; +} + +/* + * Receives a character. If a character is not available, returns -1. + */ +static int ug_udbg_getc_poll(void) +{ + if (!ug_is_rxfifo_ready()) + return -1; + return ug_getc(); +} + +/* + * Retrieves and prepares the virtual address needed to access the hardware. + */ +static void __iomem *ug_udbg_setup_exi_io_base(struct device_node *np) +{ + void __iomem *exi_io_base = NULL; + phys_addr_t paddr; + const unsigned int *reg; + + reg = of_get_property(np, "reg", NULL); + if (reg) { + paddr = of_translate_address(np, reg); + if (paddr) + exi_io_base = ioremap(paddr, reg[1]); + } + return exi_io_base; +} + +/* + * Checks if a USB Gecko adapter is inserted in any memory card slot. + */ +static void __iomem *ug_udbg_probe(void __iomem *exi_io_base) +{ + int i; + + /* look for a usbgecko on memcard slots A and B */ + for (i = 0; i < 2; i++) { + ug_io_base = exi_io_base + 0x14 * i; + if (ug_is_adapter_present()) + break; + } + if (i == 2) + ug_io_base = NULL; + return ug_io_base; + +} + +/* + * USB Gecko udbg support initialization. + */ +void __init ug_udbg_init(void) +{ + struct device_node *np; + void __iomem *exi_io_base; + + if (ug_io_base) + udbg_printf("%s: early -> final\n", __func__); + + np = of_find_compatible_node(NULL, NULL, "nintendo,flipper-exi"); + if (!np) { + udbg_printf("%s: EXI node not found\n", __func__); + goto done; + } + + exi_io_base = ug_udbg_setup_exi_io_base(np); + if (!exi_io_base) { + udbg_printf("%s: failed to setup EXI io base\n", __func__); + goto done; + } + + if (!ug_udbg_probe(exi_io_base)) { + udbg_printf("usbgecko_udbg: not found\n"); + iounmap(exi_io_base); + } else { + udbg_putc = ug_udbg_putc; + udbg_getc = ug_udbg_getc; + udbg_getc_poll = ug_udbg_getc_poll; + udbg_printf("usbgecko_udbg: ready\n"); + } + +done: + if (np) + of_node_put(np); + return; +} + +#ifdef CONFIG_PPC_EARLY_DEBUG_USBGECKO + +static phys_addr_t __init ug_early_grab_io_addr(void) +{ +#if defined(CONFIG_GAMECUBE) + return 0x0c000000; +#elif defined(CONFIG_WII) + return 0x0d000000; +#else +#error Invalid platform for USB Gecko based early debugging. +#endif +} + +/* + * USB Gecko early debug support initialization for udbg. + */ +void __init udbg_init_usbgecko(void) +{ + void __iomem *early_debug_area; + void __iomem *exi_io_base; + + /* + * At this point we have a BAT already setup that enables I/O + * to the EXI hardware. + * + * The BAT uses a virtual address range reserved at the fixmap. + * This must match the virtual address configured in + * head_32.S:setup_usbgecko_bat(). + */ + early_debug_area = (void __iomem *)__fix_to_virt(FIX_EARLY_DEBUG_BASE); + exi_io_base = early_debug_area + 0x00006800; + + /* try to detect a USB Gecko */ + if (!ug_udbg_probe(exi_io_base)) + return; + + /* we found a USB Gecko, load udbg hooks */ + udbg_putc = ug_udbg_putc; + udbg_getc = ug_udbg_getc; + udbg_getc_poll = ug_udbg_getc_poll; + + /* + * Prepare again the same BAT for MMU_init. + * This allows udbg I/O to continue working after the MMU is + * turned on for real. + * It is safe to continue using the same virtual address as it is + * a reserved fixmap area. + */ + setbat(1, (unsigned long)early_debug_area, + ug_early_grab_io_addr(), 128*1024, PAGE_KERNEL_NCG); +} + +#endif /* CONFIG_PPC_EARLY_DEBUG_USBGECKO */ + diff --git a/arch/powerpc/platforms/embedded6xx/usbgecko_udbg.h b/arch/powerpc/platforms/embedded6xx/usbgecko_udbg.h new file mode 100644 index 00000000000..bb6cde4ad76 --- /dev/null +++ b/arch/powerpc/platforms/embedded6xx/usbgecko_udbg.h @@ -0,0 +1,32 @@ +/* + * arch/powerpc/platforms/embedded6xx/usbgecko_udbg.h + * + * udbg serial input/output routines for the USB Gecko adapter. + * Copyright (C) 2008-2009 The GameCube Linux Team + * Copyright (C) 2008,2009 Albert Herranz + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + */ + +#ifndef __USBGECKO_UDBG_H +#define __USBGECKO_UDBG_H + +#ifdef CONFIG_USBGECKO_UDBG + +extern void __init ug_udbg_init(void); + +#else + +static inline void __init ug_udbg_init(void) +{ +} + +#endif /* CONFIG_USBGECKO_UDBG */ + +void __init udbg_init_usbgecko(void); + +#endif /* __USBGECKO_UDBG_H */ diff --git a/arch/powerpc/platforms/embedded6xx/wii.c b/arch/powerpc/platforms/embedded6xx/wii.c new file mode 100644 index 00000000000..57e5b608fa1 --- /dev/null +++ b/arch/powerpc/platforms/embedded6xx/wii.c @@ -0,0 +1,268 @@ +/* + * arch/powerpc/platforms/embedded6xx/wii.c + * + * Nintendo Wii board-specific support + * Copyright (C) 2008-2009 The GameCube Linux Team + * Copyright (C) 2008,2009 Albert Herranz + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + */ +#define DRV_MODULE_NAME "wii" +#define pr_fmt(fmt) DRV_MODULE_NAME ": " fmt + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/irq.h> +#include <linux/seq_file.h> +#include <linux/kexec.h> +#include <linux/of_platform.h> +#include <linux/lmb.h> +#include <mm/mmu_decl.h> + +#include <asm/io.h> +#include <asm/machdep.h> +#include <asm/prom.h> +#include <asm/time.h> +#include <asm/udbg.h> + +#include "flipper-pic.h" +#include "hlwd-pic.h" +#include "usbgecko_udbg.h" + +/* control block */ +#define HW_CTRL_COMPATIBLE "nintendo,hollywood-control" + +#define HW_CTRL_RESETS 0x94 +#define HW_CTRL_RESETS_SYS (1<<0) + +/* gpio */ +#define HW_GPIO_COMPATIBLE "nintendo,hollywood-gpio" + +#define HW_GPIO_BASE(idx) (idx * 0x20) +#define HW_GPIO_OUT(idx) (HW_GPIO_BASE(idx) + 0) +#define HW_GPIO_DIR(idx) (HW_GPIO_BASE(idx) + 4) + +#define HW_GPIO_SHUTDOWN (1<<1) +#define HW_GPIO_SLOT_LED (1<<5) +#define HW_GPIO_SENSOR_BAR (1<<8) + + +static void __iomem *hw_ctrl; +static void __iomem *hw_gpio; + +unsigned long wii_hole_start; +unsigned long wii_hole_size; + + +static int __init page_aligned(unsigned long x) +{ + return !(x & (PAGE_SIZE-1)); +} + +void __init wii_memory_fixups(void) +{ + struct lmb_property *p = lmb.memory.region; + + /* + * This is part of a workaround to allow the use of two + * discontiguous RAM ranges on the Wii, even if this is + * currently unsupported on 32-bit PowerPC Linux. + * + * We coealesce the two memory ranges of the Wii into a + * single range, then create a reservation for the "hole" + * between both ranges. + */ + + BUG_ON(lmb.memory.cnt != 2); + BUG_ON(!page_aligned(p[0].base) || !page_aligned(p[1].base)); + + p[0].size = _ALIGN_DOWN(p[0].size, PAGE_SIZE); + p[1].size = _ALIGN_DOWN(p[1].size, PAGE_SIZE); + + wii_hole_start = p[0].base + p[0].size; + wii_hole_size = p[1].base - wii_hole_start; + + pr_info("MEM1: <%08llx %08llx>\n", p[0].base, p[0].size); + pr_info("HOLE: <%08lx %08lx>\n", wii_hole_start, wii_hole_size); + pr_info("MEM2: <%08llx %08llx>\n", p[1].base, p[1].size); + + p[0].size += wii_hole_size + p[1].size; + + lmb.memory.cnt = 1; + lmb_analyze(); + + /* reserve the hole */ + lmb_reserve(wii_hole_start, wii_hole_size); + + /* allow ioremapping the address space in the hole */ + __allow_ioremap_reserved = 1; +} + +unsigned long __init wii_mmu_mapin_mem2(unsigned long top) +{ + unsigned long delta, size, bl; + unsigned long max_size = (256<<20); + + /* MEM2 64MB@0x10000000 */ + delta = wii_hole_start + wii_hole_size; + size = top - delta; + for (bl = 128<<10; bl < max_size; bl <<= 1) { + if (bl * 2 > size) + break; + } + setbat(4, PAGE_OFFSET+delta, delta, bl, PAGE_KERNEL_X); + return delta + bl; +} + +static void wii_spin(void) +{ + local_irq_disable(); + for (;;) + cpu_relax(); +} + +static void __iomem *wii_ioremap_hw_regs(char *name, char *compatible) +{ + void __iomem *hw_regs = NULL; + struct device_node *np; + struct resource res; + int error = -ENODEV; + + np = of_find_compatible_node(NULL, NULL, compatible); + if (!np) { + pr_err("no compatible node found for %s\n", compatible); + goto out; + } + error = of_address_to_resource(np, 0, &res); + if (error) { + pr_err("no valid reg found for %s\n", np->name); + goto out_put; + } + + hw_regs = ioremap(res.start, resource_size(&res)); + if (hw_regs) { + pr_info("%s at 0x%08x mapped to 0x%p\n", name, + res.start, hw_regs); + } + +out_put: + of_node_put(np); +out: + return hw_regs; +} + +static void __init wii_setup_arch(void) +{ + hw_ctrl = wii_ioremap_hw_regs("hw_ctrl", HW_CTRL_COMPATIBLE); + hw_gpio = wii_ioremap_hw_regs("hw_gpio", HW_GPIO_COMPATIBLE); + if (hw_gpio) { + /* turn off the front blue led and IR light */ + clrbits32(hw_gpio + HW_GPIO_OUT(0), + HW_GPIO_SLOT_LED | HW_GPIO_SENSOR_BAR); + } +} + +static void wii_restart(char *cmd) +{ + local_irq_disable(); + + if (hw_ctrl) { + /* clear the system reset pin to cause a reset */ + clrbits32(hw_ctrl + HW_CTRL_RESETS, HW_CTRL_RESETS_SYS); + } + wii_spin(); +} + +static void wii_power_off(void) +{ + local_irq_disable(); + + if (hw_gpio) { + /* make sure that the poweroff GPIO is configured as output */ + setbits32(hw_gpio + HW_GPIO_DIR(1), HW_GPIO_SHUTDOWN); + + /* drive the poweroff GPIO high */ + setbits32(hw_gpio + HW_GPIO_OUT(1), HW_GPIO_SHUTDOWN); + } + wii_spin(); +} + +static void wii_halt(void) +{ + if (ppc_md.restart) + ppc_md.restart(NULL); + wii_spin(); +} + +static void __init wii_init_early(void) +{ + ug_udbg_init(); +} + +static void __init wii_pic_probe(void) +{ + flipper_pic_probe(); + hlwd_pic_probe(); +} + +static int __init wii_probe(void) +{ + unsigned long dt_root; + + dt_root = of_get_flat_dt_root(); + if (!of_flat_dt_is_compatible(dt_root, "nintendo,wii")) + return 0; + + return 1; +} + +static void wii_shutdown(void) +{ + hlwd_quiesce(); + flipper_quiesce(); +} + +#ifdef CONFIG_KEXEC +static int wii_machine_kexec_prepare(struct kimage *image) +{ + return 0; +} +#endif /* CONFIG_KEXEC */ + +define_machine(wii) { + .name = "wii", + .probe = wii_probe, + .init_early = wii_init_early, + .setup_arch = wii_setup_arch, + .restart = wii_restart, + .power_off = wii_power_off, + .halt = wii_halt, + .init_IRQ = wii_pic_probe, + .get_irq = flipper_pic_get_irq, + .calibrate_decr = generic_calibrate_decr, + .progress = udbg_progress, + .machine_shutdown = wii_shutdown, +#ifdef CONFIG_KEXEC + .machine_kexec_prepare = wii_machine_kexec_prepare, +#endif +}; + +static struct of_device_id wii_of_bus[] = { + { .compatible = "nintendo,hollywood", }, + { }, +}; + +static int __init wii_device_probe(void) +{ + if (!machine_is(wii)) + return 0; + + of_platform_bus_probe(NULL, wii_of_bus, NULL); + return 0; +} +device_initcall(wii_device_probe); + diff --git a/include/linux/lmb.h b/include/linux/lmb.h index 2442e3f3d03..ef82b8fcbdd 100644 --- a/include/linux/lmb.h +++ b/include/linux/lmb.h @@ -54,6 +54,7 @@ extern u64 __init lmb_phys_mem_size(void); extern u64 lmb_end_of_DRAM(void); extern void __init lmb_enforce_memory_limit(u64 memory_limit); extern int __init lmb_is_reserved(u64 addr); +extern int lmb_is_region_reserved(u64 base, u64 size); extern int lmb_find(struct lmb_property *res); extern void lmb_dump_all(void); diff --git a/lib/lmb.c b/lib/lmb.c index 0343c05609f..9cee17142b2 100644 --- a/lib/lmb.c +++ b/lib/lmb.c @@ -263,7 +263,7 @@ long __init lmb_reserve(u64 base, u64 size) return lmb_add_region(_rgn, base, size); } -long __init lmb_overlaps_region(struct lmb_region *rgn, u64 base, u64 size) +long lmb_overlaps_region(struct lmb_region *rgn, u64 base, u64 size) { unsigned long i; @@ -493,6 +493,11 @@ int __init lmb_is_reserved(u64 addr) return 0; } +int lmb_is_region_reserved(u64 base, u64 size) +{ + return lmb_overlaps_region(&lmb.reserved, base, size); +} + /* * Given a <base, len>, find which memory regions belong to this range. * Adjust the request and return a contiguous chunk. |