{nl,cfg,mac}80211: Allow user to see/configure HT protection mode

This patch introduces a new mesh configuration parameter "ht_opmode" and will
allow user to check the current HT protection mode selected. Users could
configure the protection mode by the command "iw mesh_iface set mesh_param
mesh_ht_protection_mode=2". The default protection mode of mesh is set to
non-HT mixed mode.

Signed-off-by: Ashok Nagarajan <ashok@cozybit.com>
Reviewed-by: Thomas Pedersen <thomas@cozybit.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

5 files changed, 16 insertions, 1 deletions

diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c
index 39b1fffb24f..0221270c0dd 100644
--- a/net/mac80211/cfg.c
+++ b/net/mac80211/cfg.c
@@ -1538,6 +1538,11 @@ static int ieee80211_update_mesh_config(struct wiphy *wiphy,
 			return -ENOTSUPP;
 		conf->rssi_threshold = nconf->rssi_threshold;
 	}
+	if (_chg_mesh_attr(NL80211_MESHCONF_HT_OPMODE, mask)) {
+		conf->ht_opmode = nconf->ht_opmode;
+		sdata->vif.bss_conf.ht_operation_mode = nconf->ht_opmode;
+		ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_HT);
+	}
 	return 0;
 }
 
diff --git a/net/mac80211/mesh.c b/net/mac80211/mesh.c
index 0fabb8bae9f..0a21e4e55f4 100644
--- a/net/mac80211/mesh.c
+++ b/net/mac80211/mesh.c
@@ -595,12 +595,15 @@ void ieee80211_start_mesh(struct ieee80211_sub_if_data *sdata)
 	set_bit(MESH_WORK_HOUSEKEEPING, &ifmsh->wrkq_flags);
 	ieee80211_mesh_root_setup(ifmsh);
 	ieee80211_queue_work(&local->hw, &sdata->work);
+	sdata->vif.bss_conf.ht_operation_mode =
+				ifmsh->mshcfg.ht_opmode;
 	sdata->vif.bss_conf.beacon_int = MESH_DEFAULT_BEACON_INTERVAL;
 	sdata->vif.bss_conf.basic_rates =
 		ieee80211_mandatory_rates(sdata->local,
 					  sdata->local->hw.conf.channel->band);
 	ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BEACON |
 						BSS_CHANGED_BEACON_ENABLED |
+						BSS_CHANGED_HT |
 						BSS_CHANGED_BASIC_RATES |
 						BSS_CHANGED_BEACON_INT);
 }
diff --git a/net/mac80211/mesh_plink.c b/net/mac80211/mesh_plink.c
index 2e0ae731069..8cc8461b48a 100644
--- a/net/mac80211/mesh_plink.c
+++ b/net/mac80211/mesh_plink.c
@@ -157,6 +157,7 @@ out:
 
 	if (sdata->vif.bss_conf.ht_operation_mode != ht_opmode) {
 		sdata->vif.bss_conf.ht_operation_mode = ht_opmode;
+		sdata->u.mesh.mshcfg.ht_opmode = ht_opmode;
 		changed = BSS_CHANGED_HT;
 		mpl_dbg("mesh_plink %pM: protection mode changed to %d",
 			sdata->vif.addr, ht_opmode);
diff --git a/net/wireless/mesh.c b/net/wireless/mesh.c
index 8c747fa9319..2749cb86b46 100644
--- a/net/wireless/mesh.c
+++ b/net/wireless/mesh.c
@@ -61,6 +61,7 @@ const struct mesh_config default_mesh_config = {
 	.dot11MeshGateAnnouncementProtocol = false,
 	.dot11MeshForwarding = true,
 	.rssi_threshold = MESH_RSSI_THRESHOLD,
+	.ht_opmode = IEEE80211_HT_OP_MODE_PROTECTION_NONHT_MIXED,
 };
 
 const struct mesh_setup default_mesh_setup = {
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index d5005c59c47..b67b1114e25 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -3390,7 +3390,9 @@ static int nl80211_get_mesh_config(struct sk_buff *skb,
 	    nla_put_u8(msg, NL80211_MESHCONF_FORWARDING,
 		       cur_params.dot11MeshForwarding) ||
 	    nla_put_u32(msg, NL80211_MESHCONF_RSSI_THRESHOLD,
-			cur_params.rssi_threshold))
+			cur_params.rssi_threshold) ||
+	    nla_put_u32(msg, NL80211_MESHCONF_HT_OPMODE,
+			cur_params.ht_opmode))
 		goto nla_put_failure;
 	nla_nest_end(msg, pinfoattr);
 	genlmsg_end(msg, hdr);
@@ -3426,6 +3428,7 @@ static const struct nla_policy nl80211_meshconf_params_policy[NL80211_MESHCONF_A
 	[NL80211_MESHCONF_GATE_ANNOUNCEMENTS] = { .type = NLA_U8 },
 	[NL80211_MESHCONF_FORWARDING] = { .type = NLA_U8 },
 	[NL80211_MESHCONF_RSSI_THRESHOLD] = { .type = NLA_U32},
+	[NL80211_MESHCONF_HT_OPMODE] = { .type = NLA_U16},
 };
 
 static const struct nla_policy
@@ -3523,6 +3526,8 @@ do {\
 			mask, NL80211_MESHCONF_FORWARDING, nla_get_u8);
 	FILL_IN_MESH_PARAM_IF_SET(tb, cfg, rssi_threshold,
 			mask, NL80211_MESHCONF_RSSI_THRESHOLD, nla_get_u32);
+	FILL_IN_MESH_PARAM_IF_SET(tb, cfg, ht_opmode,
+			mask, NL80211_MESHCONF_HT_OPMODE, nla_get_u16);
 	if (mask_out)
 		*mask_out = mask;