[NET_SCHED]: Use ktime as clocksource

Get rid of the manual clock source selection mess and use ktime. Also
use a scalar representation, which allows to clean up pkt_sched.h a bit
more and results in less ktime_to_ns() calls in most cases.

The PSCHED_US2JIFFIE/PSCHED_JIFFIE2US macros are implemented quite
inefficient by this patch, following patches will convert all qdiscs
to hrtimers and get rid of them entirely.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

3 files changed, 5 insertions, 159 deletions

diff --git a/net/sched/Kconfig b/net/sched/Kconfig
index f4544dd8647..475df8449be 100644
--- a/net/sched/Kconfig
+++ b/net/sched/Kconfig
@@ -46,62 +46,6 @@ config NET_SCH_FIFO
 
 if NET_SCHED
 
-choice
-	prompt "Packet scheduler clock source"
-	default NET_SCH_CLK_GETTIMEOFDAY
-	---help---
-	  Packet schedulers need a monotonic clock that increments at a static
-	  rate. The kernel provides several suitable interfaces, each with
-	  different properties:
-	  
-	  - high resolution (us or better)
-	  - fast to read (minimal locking, no i/o access)
-	  - synchronized on all processors
-	  - handles cpu clock frequency changes
-
-	  but nothing provides all of the above.
-
-config NET_SCH_CLK_JIFFIES
-	bool "Timer interrupt"
-	---help---
-	  Say Y here if you want to use the timer interrupt (jiffies) as clock
-	  source. This clock source is fast, synchronized on all processors and
-	  handles cpu clock frequency changes, but its resolution is too low
-	  for accurate shaping except at very low speed.
-
-config NET_SCH_CLK_GETTIMEOFDAY
-	bool "gettimeofday"
-	---help---
-	  Say Y here if you want to use gettimeofday as clock source. This clock
-	  source has high resolution, is synchronized on all processors and
-	  handles cpu clock frequency changes, but it is slow.
-
-	  Choose this if you need a high resolution clock source but can't use
-	  the CPU's cycle counter.
-
-# don't allow on SMP x86 because they can have unsynchronized TSCs.
-# gettimeofday is a good alternative
-config NET_SCH_CLK_CPU
-	bool "CPU cycle counter"
-	depends on ((X86_TSC || X86_64) && !SMP) || ALPHA || SPARC64 || PPC64 || IA64
-	---help---
-	  Say Y here if you want to use the CPU's cycle counter as clock source.
-	  This is a cheap and high resolution clock source, but on some
-	  architectures it is not synchronized on all processors and doesn't
-	  handle cpu clock frequency changes.
-
-	  The useable cycle counters are:
-
-	  	x86/x86_64	- Timestamp Counter
-		alpha		- Cycle Counter
-		sparc64		- %ticks register
-		ppc64		- Time base
-		ia64		- Interval Time Counter
-
-	  Choose this if your CPU's cycle counter is working properly.
-
-endchoice
-
 comment "Queueing/Scheduling"
 
 config NET_SCH_CBQ
diff --git a/net/sched/sch_api.c b/net/sched/sch_api.c
index 4a927a5e1fa..d71bf79eb80 100644
--- a/net/sched/sch_api.c
+++ b/net/sched/sch_api.c
@@ -1175,15 +1175,12 @@ reclassify:
 	return -1;
 }
 
-static int psched_us_per_tick = 1;
-static int psched_tick_per_us = 1;
-
 #ifdef CONFIG_PROC_FS
 static int psched_show(struct seq_file *seq, void *v)
 {
 	seq_printf(seq, "%08x %08x %08x %08x\n",
-		      psched_tick_per_us, psched_us_per_tick,
-		      1000000, HZ);
+		   (u32)NSEC_PER_USEC, (u32)PSCHED_US2NS(1),
+		   1000000, HZ);
 
 	return 0;
 }
@@ -1202,80 +1199,10 @@ static const struct file_operations psched_fops = {
 };
 #endif
 
-#ifdef CONFIG_NET_SCH_CLK_CPU
-psched_tdiff_t psched_clock_per_hz;
-int psched_clock_scale;
-EXPORT_SYMBOL(psched_clock_per_hz);
-EXPORT_SYMBOL(psched_clock_scale);
-
-psched_time_t psched_time_base;
-cycles_t psched_time_mark;
-EXPORT_SYMBOL(psched_time_mark);
-EXPORT_SYMBOL(psched_time_base);
-
-/*
- * Periodically adjust psched_time_base to avoid overflow
- * with 32-bit get_cycles(). Safe up to 4GHz CPU.
- */
-static void psched_tick(unsigned long);
-static DEFINE_TIMER(psched_timer, psched_tick, 0, 0);
-
-static void psched_tick(unsigned long dummy)
-{
-	if (sizeof(cycles_t) == sizeof(u32)) {
-		psched_time_t dummy_stamp;
-		PSCHED_GET_TIME(dummy_stamp);
-		psched_timer.expires = jiffies + 1*HZ;
-		add_timer(&psched_timer);
-	}
-}
-
-int __init psched_calibrate_clock(void)
-{
-	psched_time_t stamp, stamp1;
-	struct timeval tv, tv1;
-	psched_tdiff_t delay;
-	long rdelay;
-	unsigned long stop;
-
-	psched_tick(0);
-	stop = jiffies + HZ/10;
-	PSCHED_GET_TIME(stamp);
-	do_gettimeofday(&tv);
-	while (time_before(jiffies, stop)) {
-		barrier();
-		cpu_relax();
-	}
-	PSCHED_GET_TIME(stamp1);
-	do_gettimeofday(&tv1);
-
-	delay = PSCHED_TDIFF(stamp1, stamp);
-	rdelay = tv1.tv_usec - tv.tv_usec;
-	rdelay += (tv1.tv_sec - tv.tv_sec)*1000000;
-	if (rdelay > delay)
-		return -1;
-	delay /= rdelay;
-	psched_tick_per_us = delay;
-	while ((delay>>=1) != 0)
-		psched_clock_scale++;
-	psched_us_per_tick = 1<<psched_clock_scale;
-	psched_clock_per_hz = (psched_tick_per_us*(1000000/HZ))>>psched_clock_scale;
-	return 0;
-}
-#endif
-
 static int __init pktsched_init(void)
 {
 	struct rtnetlink_link *link_p;
 
-#ifdef CONFIG_NET_SCH_CLK_CPU
-	if (psched_calibrate_clock() < 0)
-		return -1;
-#elif defined(CONFIG_NET_SCH_CLK_JIFFIES)
-	psched_tick_per_us = HZ<<PSCHED_JSCALE;
-	psched_us_per_tick = 1000000;
-#endif
-
 	link_p = rtnetlink_links[PF_UNSPEC];
 
 	/* Setup rtnetlink links. It is made here to avoid
diff --git a/net/sched/sch_hfsc.c b/net/sched/sch_hfsc.c
index 407c6fb1ba1..f85cfba647f 100644
--- a/net/sched/sch_hfsc.c
+++ b/net/sched/sch_hfsc.c
@@ -195,20 +195,6 @@ struct hfsc_sched
 	struct timer_list wd_timer;		/* watchdog timer */
 };
 
-/*
- * macros
- */
-#ifdef CONFIG_NET_SCH_CLK_GETTIMEOFDAY
-#include <linux/time.h>
-#undef PSCHED_GET_TIME
-#define PSCHED_GET_TIME(stamp)						\
-do {									\
-	struct timeval tv;						\
-	do_gettimeofday(&tv);						\
-	(stamp) = 1ULL * USEC_PER_SEC * tv.tv_sec + tv.tv_usec;		\
-} while (0)
-#endif
-
 #define	HT_INFINITY	0xffffffffffffffffULL	/* infinite time value */
 
 
@@ -394,28 +380,17 @@ cftree_update(struct hfsc_class *cl)
  *	ism: (psched_us/byte) << ISM_SHIFT
  *	dx: psched_us
  *
- * Clock source resolution (CONFIG_NET_SCH_CLK_*)
- *  JIFFIES: for 48<=HZ<=1534 resolution is between 0.63us and 1.27us.
- *  CPU: resolution is between 0.5us and 1us.
- *  GETTIMEOFDAY: resolution is exactly 1us.
+ * The clock source resolution with ktime is 1.024us.
  *
  * sm and ism are scaled in order to keep effective digits.
  * SM_SHIFT and ISM_SHIFT are selected to keep at least 4 effective
  * digits in decimal using the following table.
  *
- * Note: We can afford the additional accuracy (altq hfsc keeps at most
- * 3 effective digits) thanks to the fact that linux clock is bounded
- * much more tightly.
- *
  *  bits/sec      100Kbps     1Mbps     10Mbps     100Mbps    1Gbps
  *  ------------+-------------------------------------------------------
- *  bytes/0.5us   6.25e-3    62.5e-3    625e-3     6250e-e    62500e-3
- *  bytes/us      12.5e-3    125e-3     1250e-3    12500e-3   125000e-3
- *  bytes/1.27us  15.875e-3  158.75e-3  1587.5e-3  15875e-3   158750e-3
+ *  bytes/1.024us 12.8e-3    128e-3     1280e-3    12800e-3   128000e-3
  *
- *  0.5us/byte    160        16         1.6        0.16       0.016
- *  us/byte       80         8          0.8        0.08       0.008
- *  1.27us/byte   63         6.3        0.63       0.063      0.0063
+ *  1.024us/byte  78.125     7.8125     0.78125    0.078125   0.0078125
  */
 #define	SM_SHIFT	20
 #define	ISM_SHIFT	18