Merge branch 'for-next' of git://git.o-hand.com/linux-mfd

* 'for-next' of git://git.o-hand.com/linux-mfd:
  mfd: further unbork the ucb1400 ac97_bus dependencies
  mfd: ucb1400 needs GPIO
  mfd: ucb1400 sound driver uses/depends on AC97_BUS:
  mfd: Don't use NO_IRQ in WM8350
  mfd: update TMIO drivers to use the clock API
  mfd: twl4030-core irq simplification
  mfd: add base support for Dialog DA9030/DA9034 PMICs
  mfd: TWL4030 core driver
  mfd: support tmiofb cell on tc6393xb
  mfd: add OHCI cell to tc6393xb
  mfd: Fix htc-egpio compile warning
  mfd: do tcb6393xb state restore on resume only if requested
  mfd: provide and use setup hook for tc6393xb
  mfd: update sm501 debugging/low information messages
  mfd: reduce stack usage in mfd-core.c

5 files changed, 555 insertions, 7 deletions

diff --git a/include/linux/i2c/twl4030.h b/include/linux/i2c/twl4030.h
new file mode 100644
index 00000000000..cdb453162a9
--- /dev/null
+++ b/include/linux/i2c/twl4030.h
@@ -0,0 +1,339 @@
+/*
+ * twl4030.h - header for TWL4030 PM and audio CODEC device
+ *
+ * Copyright (C) 2005-2006 Texas Instruments, Inc.
+ *
+ * Based on tlv320aic23.c:
+ * Copyright (c) by Kai Svahn <kai.svahn@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ *
+ */
+
+#ifndef __TWL4030_H_
+#define __TWL4030_H_
+
+/*
+ * Using the twl4030 core we address registers using a pair
+ *	{ module id, relative register offset }
+ * which that core then maps to the relevant
+ *	{ i2c slave, absolute register address }
+ *
+ * The module IDs are meaningful only to the twl4030 core code,
+ * which uses them as array indices to look up the first register
+ * address each module uses within a given i2c slave.
+ */
+
+/* Slave 0 (i2c address 0x48) */
+#define TWL4030_MODULE_USB		0x00
+
+/* Slave 1 (i2c address 0x49) */
+#define TWL4030_MODULE_AUDIO_VOICE	0x01
+#define TWL4030_MODULE_GPIO		0x02
+#define TWL4030_MODULE_INTBR		0x03
+#define TWL4030_MODULE_PIH		0x04
+#define TWL4030_MODULE_TEST		0x05
+
+/* Slave 2 (i2c address 0x4a) */
+#define TWL4030_MODULE_KEYPAD		0x06
+#define TWL4030_MODULE_MADC		0x07
+#define TWL4030_MODULE_INTERRUPTS	0x08
+#define TWL4030_MODULE_LED		0x09
+#define TWL4030_MODULE_MAIN_CHARGE	0x0A
+#define TWL4030_MODULE_PRECHARGE	0x0B
+#define TWL4030_MODULE_PWM0		0x0C
+#define TWL4030_MODULE_PWM1		0x0D
+#define TWL4030_MODULE_PWMA		0x0E
+#define TWL4030_MODULE_PWMB		0x0F
+
+/* Slave 3 (i2c address 0x4b) */
+#define TWL4030_MODULE_BACKUP		0x10
+#define TWL4030_MODULE_INT		0x11
+#define TWL4030_MODULE_PM_MASTER	0x12
+#define TWL4030_MODULE_PM_RECEIVER	0x13
+#define TWL4030_MODULE_RTC		0x14
+#define TWL4030_MODULE_SECURED_REG	0x15
+
+/*
+ * Read and write single 8-bit registers
+ */
+int twl4030_i2c_write_u8(u8 mod_no, u8 val, u8 reg);
+int twl4030_i2c_read_u8(u8 mod_no, u8 *val, u8 reg);
+
+/*
+ * Read and write several 8-bit registers at once.
+ *
+ * IMPORTANT:  For twl4030_i2c_write(), allocate num_bytes + 1
+ * for the value, and populate your data starting at offset 1.
+ */
+int twl4030_i2c_write(u8 mod_no, u8 *value, u8 reg, u8 num_bytes);
+int twl4030_i2c_read(u8 mod_no, u8 *value, u8 reg, u8 num_bytes);
+
+/*----------------------------------------------------------------------*/
+
+/*
+ * NOTE:  at up to 1024 registers, this is a big chip.
+ *
+ * Avoid putting register declarations in this file, instead of into
+ * a driver-private file, unless some of the registers in a block
+ * need to be shared with other drivers.  One example is blocks that
+ * have Secondary IRQ Handler (SIH) registers.
+ */
+
+#define TWL4030_SIH_CTRL_EXCLEN_MASK	BIT(0)
+#define TWL4030_SIH_CTRL_PENDDIS_MASK	BIT(1)
+#define TWL4030_SIH_CTRL_COR_MASK	BIT(2)
+
+/*----------------------------------------------------------------------*/
+
+/*
+ * GPIO Block Register offsets (use TWL4030_MODULE_GPIO)
+ */
+
+#define REG_GPIODATAIN1			0x0
+#define REG_GPIODATAIN2			0x1
+#define REG_GPIODATAIN3			0x2
+#define REG_GPIODATADIR1		0x3
+#define REG_GPIODATADIR2		0x4
+#define REG_GPIODATADIR3		0x5
+#define REG_GPIODATAOUT1		0x6
+#define REG_GPIODATAOUT2		0x7
+#define REG_GPIODATAOUT3		0x8
+#define REG_CLEARGPIODATAOUT1		0x9
+#define REG_CLEARGPIODATAOUT2		0xA
+#define REG_CLEARGPIODATAOUT3		0xB
+#define REG_SETGPIODATAOUT1		0xC
+#define REG_SETGPIODATAOUT2		0xD
+#define REG_SETGPIODATAOUT3		0xE
+#define REG_GPIO_DEBEN1			0xF
+#define REG_GPIO_DEBEN2			0x10
+#define REG_GPIO_DEBEN3			0x11
+#define REG_GPIO_CTRL			0x12
+#define REG_GPIOPUPDCTR1		0x13
+#define REG_GPIOPUPDCTR2		0x14
+#define REG_GPIOPUPDCTR3		0x15
+#define REG_GPIOPUPDCTR4		0x16
+#define REG_GPIOPUPDCTR5		0x17
+#define REG_GPIO_ISR1A			0x19
+#define REG_GPIO_ISR2A			0x1A
+#define REG_GPIO_ISR3A			0x1B
+#define REG_GPIO_IMR1A			0x1C
+#define REG_GPIO_IMR2A			0x1D
+#define REG_GPIO_IMR3A			0x1E
+#define REG_GPIO_ISR1B			0x1F
+#define REG_GPIO_ISR2B			0x20
+#define REG_GPIO_ISR3B			0x21
+#define REG_GPIO_IMR1B			0x22
+#define REG_GPIO_IMR2B			0x23
+#define REG_GPIO_IMR3B			0x24
+#define REG_GPIO_EDR1			0x28
+#define REG_GPIO_EDR2			0x29
+#define REG_GPIO_EDR3			0x2A
+#define REG_GPIO_EDR4			0x2B
+#define REG_GPIO_EDR5			0x2C
+#define REG_GPIO_SIH_CTRL		0x2D
+
+/* Up to 18 signals are available as GPIOs, when their
+ * pins are not assigned to another use (such as ULPI/USB).
+ */
+#define TWL4030_GPIO_MAX		18
+
+/*----------------------------------------------------------------------*/
+
+/*
+ * Keypad register offsets (use TWL4030_MODULE_KEYPAD)
+ * ... SIH/interrupt only
+ */
+
+#define TWL4030_KEYPAD_KEYP_ISR1	0x11
+#define TWL4030_KEYPAD_KEYP_IMR1	0x12
+#define TWL4030_KEYPAD_KEYP_ISR2	0x13
+#define TWL4030_KEYPAD_KEYP_IMR2	0x14
+#define TWL4030_KEYPAD_KEYP_SIR		0x15	/* test register */
+#define TWL4030_KEYPAD_KEYP_EDR		0x16
+#define TWL4030_KEYPAD_KEYP_SIH_CTRL	0x17
+
+/*----------------------------------------------------------------------*/
+
+/*
+ * Multichannel ADC register offsets (use TWL4030_MODULE_MADC)
+ * ... SIH/interrupt only
+ */
+
+#define TWL4030_MADC_ISR1		0x61
+#define TWL4030_MADC_IMR1		0x62
+#define TWL4030_MADC_ISR2		0x63
+#define TWL4030_MADC_IMR2		0x64
+#define TWL4030_MADC_SIR		0x65	/* test register */
+#define TWL4030_MADC_EDR		0x66
+#define TWL4030_MADC_SIH_CTRL		0x67
+
+/*----------------------------------------------------------------------*/
+
+/*
+ * Battery charger register offsets (use TWL4030_MODULE_INTERRUPTS)
+ */
+
+#define TWL4030_INTERRUPTS_BCIISR1A	0x0
+#define TWL4030_INTERRUPTS_BCIISR2A	0x1
+#define TWL4030_INTERRUPTS_BCIIMR1A	0x2
+#define TWL4030_INTERRUPTS_BCIIMR2A	0x3
+#define TWL4030_INTERRUPTS_BCIISR1B	0x4
+#define TWL4030_INTERRUPTS_BCIISR2B	0x5
+#define TWL4030_INTERRUPTS_BCIIMR1B	0x6
+#define TWL4030_INTERRUPTS_BCIIMR2B	0x7
+#define TWL4030_INTERRUPTS_BCISIR1	0x8	/* test register */
+#define TWL4030_INTERRUPTS_BCISIR2	0x9	/* test register */
+#define TWL4030_INTERRUPTS_BCIEDR1	0xa
+#define TWL4030_INTERRUPTS_BCIEDR2	0xb
+#define TWL4030_INTERRUPTS_BCIEDR3	0xc
+#define TWL4030_INTERRUPTS_BCISIHCTRL	0xd
+
+/*----------------------------------------------------------------------*/
+
+/*
+ * Power Interrupt block register offsets (use TWL4030_MODULE_INT)
+ */
+
+#define TWL4030_INT_PWR_ISR1		0x0
+#define TWL4030_INT_PWR_IMR1		0x1
+#define TWL4030_INT_PWR_ISR2		0x2
+#define TWL4030_INT_PWR_IMR2		0x3
+#define TWL4030_INT_PWR_SIR		0x4	/* test register */
+#define TWL4030_INT_PWR_EDR1		0x5
+#define TWL4030_INT_PWR_EDR2		0x6
+#define TWL4030_INT_PWR_SIH_CTRL	0x7
+
+/*----------------------------------------------------------------------*/
+
+struct twl4030_bci_platform_data {
+	int *battery_tmp_tbl;
+	unsigned int tblsize;
+};
+
+/* TWL4030_GPIO_MAX (18) GPIOs, with interrupts */
+struct twl4030_gpio_platform_data {
+	int		gpio_base;
+	unsigned	irq_base, irq_end;
+
+	/* For gpio-N, bit (1 << N) in "pullups" is set if that pullup
+	 * should be enabled.  Else, if that bit is set in "pulldowns",
+	 * that pulldown is enabled.  Don't waste power by letting any
+	 * digital inputs float...
+	 */
+	u32		pullups;
+	u32		pulldowns;
+
+	int		(*setup)(struct device *dev,
+				unsigned gpio, unsigned ngpio);
+	int		(*teardown)(struct device *dev,
+				unsigned gpio, unsigned ngpio);
+};
+
+struct twl4030_madc_platform_data {
+	int		irq_line;
+};
+
+struct twl4030_keypad_data {
+	int rows;
+	int cols;
+	int *keymap;
+	int irq;
+	unsigned int keymapsize;
+	unsigned int rep:1;
+};
+
+enum twl4030_usb_mode {
+	T2_USB_MODE_ULPI = 1,
+	T2_USB_MODE_CEA2011_3PIN = 2,
+};
+
+struct twl4030_usb_data {
+	enum twl4030_usb_mode	usb_mode;
+};
+
+struct twl4030_platform_data {
+	unsigned				irq_base, irq_end;
+	struct twl4030_bci_platform_data	*bci;
+	struct twl4030_gpio_platform_data	*gpio;
+	struct twl4030_madc_platform_data	*madc;
+	struct twl4030_keypad_data		*keypad;
+	struct twl4030_usb_data			*usb;
+
+	/* REVISIT more to come ... _nothing_ should be hard-wired */
+};
+
+/*----------------------------------------------------------------------*/
+
+/*
+ * FIXME completely stop using TWL4030_IRQ_BASE ... instead, pass the
+ * IRQ data to subsidiary devices using platform device resources.
+ */
+
+/* IRQ information-need base */
+#include <mach/irqs.h>
+/* TWL4030 interrupts */
+
+/* #define TWL4030_MODIRQ_GPIO		(TWL4030_IRQ_BASE + 0) */
+#define TWL4030_MODIRQ_KEYPAD		(TWL4030_IRQ_BASE + 1)
+#define TWL4030_MODIRQ_BCI		(TWL4030_IRQ_BASE + 2)
+#define TWL4030_MODIRQ_MADC		(TWL4030_IRQ_BASE + 3)
+/* #define TWL4030_MODIRQ_USB		(TWL4030_IRQ_BASE + 4) */
+#define TWL4030_MODIRQ_PWR		(TWL4030_IRQ_BASE + 5)
+
+#define TWL4030_PWRIRQ_PWRBTN		(TWL4030_PWR_IRQ_BASE + 0)
+#define TWL4030_PWRIRQ_CHG_PRES		(TWL4030_PWR_IRQ_BASE + 1)
+#define TWL4030_PWRIRQ_USB_PRES		(TWL4030_PWR_IRQ_BASE + 2)
+#define TWL4030_PWRIRQ_RTC		(TWL4030_PWR_IRQ_BASE + 3)
+#define TWL4030_PWRIRQ_HOT_DIE		(TWL4030_PWR_IRQ_BASE + 4)
+#define TWL4030_PWRIRQ_PWROK_TIMEOUT	(TWL4030_PWR_IRQ_BASE + 5)
+#define TWL4030_PWRIRQ_MBCHG		(TWL4030_PWR_IRQ_BASE + 6)
+#define TWL4030_PWRIRQ_SC_DETECT	(TWL4030_PWR_IRQ_BASE + 7)
+
+/* Rest are unsued currently*/
+
+/* Offsets to Power Registers */
+#define TWL4030_VDAC_DEV_GRP		0x3B
+#define TWL4030_VDAC_DEDICATED		0x3E
+#define TWL4030_VAUX1_DEV_GRP		0x17
+#define TWL4030_VAUX1_DEDICATED		0x1A
+#define TWL4030_VAUX2_DEV_GRP		0x1B
+#define TWL4030_VAUX2_DEDICATED		0x1E
+#define TWL4030_VAUX3_DEV_GRP		0x1F
+#define TWL4030_VAUX3_DEDICATED		0x22
+
+/* TWL4030 GPIO interrupt definitions */
+
+#define TWL4030_GPIO_IRQ_NO(n)		(TWL4030_GPIO_IRQ_BASE + (n))
+#define TWL4030_GPIO_IS_ENABLE		1
+
+/*
+ * Exported TWL4030 GPIO APIs
+ *
+ * WARNING -- use standard GPIO and IRQ calls instead; these will vanish.
+ */
+int twl4030_get_gpio_datain(int gpio);
+int twl4030_request_gpio(int gpio);
+int twl4030_set_gpio_debounce(int gpio, int enable);
+int twl4030_free_gpio(int gpio);
+
+#if defined(CONFIG_TWL4030_BCI_BATTERY) || \
+	defined(CONFIG_TWL4030_BCI_BATTERY_MODULE)
+	extern int twl4030charger_usb_en(int enable);
+#else
+	static inline int twl4030charger_usb_en(int enable) { return 0; }
+#endif
+
+#endif /* End of __TWL4030_H */
diff --git a/include/linux/mfd/da903x.h b/include/linux/mfd/da903x.h
new file mode 100644
index 00000000000..cad314c1243
--- /dev/null
+++ b/include/linux/mfd/da903x.h
@@ -0,0 +1,201 @@
+#ifndef __LINUX_PMIC_DA903X_H
+#define __LINUX_PMIC_DA903X_H
+
+/* Unified sub device IDs for DA9030/DA9034 */
+enum {
+	DA9030_ID_LED_1,
+	DA9030_ID_LED_2,
+	DA9030_ID_LED_3,
+	DA9030_ID_LED_4,
+	DA9030_ID_LED_PC,
+	DA9030_ID_VIBRA,
+	DA9030_ID_WLED,
+	DA9030_ID_BUCK1,
+	DA9030_ID_BUCK2,
+	DA9030_ID_LDO1,
+	DA9030_ID_LDO2,
+	DA9030_ID_LDO3,
+	DA9030_ID_LDO4,
+	DA9030_ID_LDO5,
+	DA9030_ID_LDO6,
+	DA9030_ID_LDO7,
+	DA9030_ID_LDO8,
+	DA9030_ID_LDO9,
+	DA9030_ID_LDO10,
+	DA9030_ID_LDO11,
+	DA9030_ID_LDO12,
+	DA9030_ID_LDO13,
+	DA9030_ID_LDO14,
+	DA9030_ID_LDO15,
+	DA9030_ID_LDO16,
+	DA9030_ID_LDO17,
+	DA9030_ID_LDO18,
+	DA9030_ID_LDO19,
+	DA9030_ID_LDO_INT,	/* LDO Internal */
+
+	DA9034_ID_LED_1,
+	DA9034_ID_LED_2,
+	DA9034_ID_VIBRA,
+	DA9034_ID_WLED,
+	DA9034_ID_TOUCH,
+
+	DA9034_ID_BUCK1,
+	DA9034_ID_BUCK2,
+	DA9034_ID_LDO1,
+	DA9034_ID_LDO2,
+	DA9034_ID_LDO3,
+	DA9034_ID_LDO4,
+	DA9034_ID_LDO5,
+	DA9034_ID_LDO6,
+	DA9034_ID_LDO7,
+	DA9034_ID_LDO8,
+	DA9034_ID_LDO9,
+	DA9034_ID_LDO10,
+	DA9034_ID_LDO11,
+	DA9034_ID_LDO12,
+	DA9034_ID_LDO13,
+	DA9034_ID_LDO14,
+	DA9034_ID_LDO15,
+};
+
+/*
+ * DA9030/DA9034 LEDs sub-devices uses generic "struct led_info"
+ * as the platform_data
+ */
+
+/* DA9030 flags for "struct led_info"
+ */
+#define DA9030_LED_RATE_ON	(0 << 5)
+#define DA9030_LED_RATE_052S	(1 << 5)
+#define DA9030_LED_DUTY_1_16	(0 << 3)
+#define DA9030_LED_DUTY_1_8	(1 << 3)
+#define DA9030_LED_DUTY_1_4	(2 << 3)
+#define DA9030_LED_DUTY_1_2	(3 << 3)
+
+#define DA9030_VIBRA_MODE_1P3V	(0 << 1)
+#define DA9030_VIBRA_MODE_2P7V	(1 << 1)
+#define DA9030_VIBRA_FREQ_1HZ	(0 << 2)
+#define DA9030_VIBRA_FREQ_2HZ	(1 << 2)
+#define DA9030_VIBRA_FREQ_4HZ	(2 << 2)
+#define DA9030_VIBRA_FREQ_8HZ	(3 << 2)
+#define DA9030_VIBRA_DUTY_ON	(0 << 4)
+#define DA9030_VIBRA_DUTY_75P	(1 << 4)
+#define DA9030_VIBRA_DUTY_50P	(2 << 4)
+#define DA9030_VIBRA_DUTY_25P	(3 << 4)
+
+/* DA9034 flags for "struct led_info" */
+#define DA9034_LED_RAMP		(1 << 7)
+
+/* DA9034 touch screen platform data */
+struct da9034_touch_pdata {
+	int	interval_ms;	/* sampling interval while pen down */
+	int	x_inverted;
+	int	y_inverted;
+};
+
+struct da903x_subdev_info {
+	int		id;
+	const char	*name;
+	void		*platform_data;
+};
+
+struct da903x_platform_data {
+	int num_subdevs;
+	struct da903x_subdev_info *subdevs;
+};
+
+/* bit definitions for DA9030 events */
+#define DA9030_EVENT_ONKEY		(1 << 0)
+#define	DA9030_EVENT_PWREN		(1 << 1)
+#define	DA9030_EVENT_EXTON		(1 << 2)
+#define	DA9030_EVENT_CHDET		(1 << 3)
+#define	DA9030_EVENT_TBAT		(1 << 4)
+#define	DA9030_EVENT_VBATMON		(1 << 5)
+#define	DA9030_EVENT_VBATMON_TXON	(1 << 6)
+#define	DA9030_EVENT_CHIOVER		(1 << 7)
+#define	DA9030_EVENT_TCTO		(1 << 8)
+#define	DA9030_EVENT_CCTO		(1 << 9)
+#define	DA9030_EVENT_ADC_READY		(1 << 10)
+#define	DA9030_EVENT_VBUS_4P4		(1 << 11)
+#define	DA9030_EVENT_VBUS_4P0		(1 << 12)
+#define	DA9030_EVENT_SESS_VALID		(1 << 13)
+#define	DA9030_EVENT_SRP_DETECT		(1 << 14)
+#define	DA9030_EVENT_WATCHDOG		(1 << 15)
+#define	DA9030_EVENT_LDO15		(1 << 16)
+#define	DA9030_EVENT_LDO16		(1 << 17)
+#define	DA9030_EVENT_LDO17		(1 << 18)
+#define	DA9030_EVENT_LDO18		(1 << 19)
+#define	DA9030_EVENT_LDO19		(1 << 20)
+#define	DA9030_EVENT_BUCK2		(1 << 21)
+
+/* bit definitions for DA9034 events */
+#define DA9034_EVENT_ONKEY		(1 << 0)
+#define DA9034_EVENT_EXTON		(1 << 2)
+#define DA9034_EVENT_CHDET		(1 << 3)
+#define DA9034_EVENT_TBAT		(1 << 4)
+#define DA9034_EVENT_VBATMON		(1 << 5)
+#define DA9034_EVENT_REV_IOVER		(1 << 6)
+#define DA9034_EVENT_CH_IOVER		(1 << 7)
+#define DA9034_EVENT_CH_TCTO		(1 << 8)
+#define DA9034_EVENT_CH_CCTO		(1 << 9)
+#define DA9034_EVENT_USB_DEV		(1 << 10)
+#define DA9034_EVENT_OTGCP_IOVER	(1 << 11)
+#define DA9034_EVENT_VBUS_4P55		(1 << 12)
+#define DA9034_EVENT_VBUS_3P8		(1 << 13)
+#define DA9034_EVENT_SESS_1P8		(1 << 14)
+#define DA9034_EVENT_SRP_READY		(1 << 15)
+#define DA9034_EVENT_ADC_MAN		(1 << 16)
+#define DA9034_EVENT_ADC_AUTO4		(1 << 17)
+#define DA9034_EVENT_ADC_AUTO5		(1 << 18)
+#define DA9034_EVENT_ADC_AUTO6		(1 << 19)
+#define DA9034_EVENT_PEN_DOWN		(1 << 20)
+#define DA9034_EVENT_TSI_READY		(1 << 21)
+#define DA9034_EVENT_UART_TX		(1 << 22)
+#define DA9034_EVENT_UART_RX		(1 << 23)
+#define DA9034_EVENT_HEADSET		(1 << 25)
+#define DA9034_EVENT_HOOKSWITCH		(1 << 26)
+#define DA9034_EVENT_WATCHDOG		(1 << 27)
+
+extern int da903x_register_notifier(struct device *dev,
+		struct notifier_block *nb, unsigned int events);
+extern int da903x_unregister_notifier(struct device *dev,
+		struct notifier_block *nb, unsigned int events);
+
+/* Status Query Interface */
+#define DA9030_STATUS_ONKEY		(1 << 0)
+#define DA9030_STATUS_PWREN1		(1 << 1)
+#define DA9030_STATUS_EXTON		(1 << 2)
+#define DA9030_STATUS_CHDET		(1 << 3)
+#define DA9030_STATUS_TBAT		(1 << 4)
+#define DA9030_STATUS_VBATMON		(1 << 5)
+#define DA9030_STATUS_VBATMON_TXON	(1 << 6)
+#define DA9030_STATUS_MCLKDET		(1 << 7)
+
+#define DA9034_STATUS_ONKEY		(1 << 0)
+#define DA9034_STATUS_EXTON		(1 << 2)
+#define DA9034_STATUS_CHDET		(1 << 3)
+#define DA9034_STATUS_TBAT		(1 << 4)
+#define DA9034_STATUS_VBATMON		(1 << 5)
+#define DA9034_STATUS_PEN_DOWN		(1 << 6)
+#define DA9034_STATUS_MCLKDET		(1 << 7)
+#define DA9034_STATUS_USB_DEV		(1 << 8)
+#define DA9034_STATUS_HEADSET		(1 << 9)
+#define DA9034_STATUS_HOOKSWITCH	(1 << 10)
+#define DA9034_STATUS_REMCON		(1 << 11)
+#define DA9034_STATUS_VBUS_VALID_4P55	(1 << 12)
+#define DA9034_STATUS_VBUS_VALID_3P8	(1 << 13)
+#define DA9034_STATUS_SESS_VALID_1P8	(1 << 14)
+#define DA9034_STATUS_SRP_READY		(1 << 15)
+
+extern int da903x_query_status(struct device *dev, unsigned int status);
+
+
+/* NOTE: the two functions below are not intended for use outside
+ * of the DA9034 sub-device drivers
+ */
+extern int da903x_write(struct device *dev, int reg, uint8_t val);
+extern int da903x_read(struct device *dev, int reg, uint8_t *val);
+extern int da903x_update(struct device *dev, int reg, uint8_t val, uint8_t mask);
+extern int da903x_set_bits(struct device *dev, int reg, uint8_t bit_mask);
+extern int da903x_clr_bits(struct device *dev, int reg, uint8_t bit_mask);
+#endif /* __LINUX_PMIC_DA903X_H */
diff --git a/include/linux/mfd/t7l66xb.h b/include/linux/mfd/t7l66xb.h
index e83c7f2036f..b4629818aea 100644
--- a/include/linux/mfd/t7l66xb.h
+++ b/include/linux/mfd/t7l66xb.h
@@ -15,8 +15,6 @@
 #include <linux/mfd/tmio.h>
 
 struct t7l66xb_platform_data {
-	int (*enable_clk32k)(struct platform_device *dev);
-	void (*disable_clk32k)(struct platform_device *dev);
 	int (*enable)(struct platform_device *dev);
 	int (*disable)(struct platform_device *dev);
 	int (*suspend)(struct platform_device *dev);
diff --git a/include/linux/mfd/tc6387xb.h b/include/linux/mfd/tc6387xb.h
index fa06e0610b8..b4888209494 100644
--- a/include/linux/mfd/tc6387xb.h
+++ b/include/linux/mfd/tc6387xb.h
@@ -11,9 +11,6 @@
 #define MFD_TC6387XB_H
 
 struct tc6387xb_platform_data {
-	int (*enable_clk32k)(struct platform_device *dev);
-	void (*disable_clk32k)(struct platform_device *dev);
-
 	int (*enable)(struct platform_device *dev);
 	int (*disable)(struct platform_device *dev);
 	int (*suspend)(struct platform_device *dev);
diff --git a/include/linux/mfd/tc6393xb.h b/include/linux/mfd/tc6393xb.h
index fec7b3f7a81..626e448205c 100644
--- a/include/linux/mfd/tc6393xb.h
+++ b/include/linux/mfd/tc6393xb.h
@@ -17,12 +17,12 @@
 #ifndef MFD_TC6393XB_H
 #define MFD_TC6393XB_H
 
+#include <linux/fb.h>
+
 /* Also one should provide the CK3P6MI clock */
 struct tc6393xb_platform_data {
 	u16	scr_pll2cr;	/* PLL2 Control */
 	u16	scr_gper;	/* GP Enable */
-	u32	scr_gpo_doecr;	/* GPO Data OE Control */
-	u32	scr_gpo_dsr;	/* GPO Data Set */
 
 	int	(*enable)(struct platform_device *dev);
 	int	(*disable)(struct platform_device *dev);
@@ -31,15 +31,28 @@ struct tc6393xb_platform_data {
 
 	int	irq_base;	/* base for subdevice irqs */
 	int	gpio_base;
+	int	(*setup)(struct platform_device *dev);
+	void	(*teardown)(struct platform_device *dev);
 
 	struct tmio_nand_data	*nand_data;
+	struct tmio_fb_data	*fb_data;
+
+	unsigned resume_restore : 1; /* make special actions
+					to preserve the state
+					on suspend/resume */
 };
 
+extern int tc6393xb_lcd_mode(struct platform_device *fb,
+			     const struct fb_videomode *mode);
+extern int tc6393xb_lcd_set_power(struct platform_device *fb, bool on);
+
 /*
  * Relative to irq_base
  */
 #define	IRQ_TC6393_NAND		0
 #define	IRQ_TC6393_MMC		1
+#define	IRQ_TC6393_OHCI		2
+#define	IRQ_TC6393_FB		4
 
 #define	TC6393XB_NR_IRQS	8