Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking update from David Miller:

 1) Checkpoint/restarted TCP sockets now can properly propagate the TCP
    timestamp offset.  From Andrey Vagin.

 2) VMWARE VM VSOCK layer, from Andy King.

 3) Much improved support for virtual functions and SR-IOV in bnx2x,
    from Ariel ELior.

 4) All protocols on ipv4 and ipv6 are now network namespace aware, and
    all the compatability checks for initial-namespace-only protocols is
    removed.  Thanks to Tom Parkin for helping deal with the last major
    holdout, L2TP.

 5) IPV6 support in netpoll and network namespace support in pktgen,
    from Cong Wang.

 6) Multiple Registration Protocol (MRP) and Multiple VLAN Registration
    Protocol (MVRP) support, from David Ward.

 7) Compute packet lengths more accurately in the packet scheduler, from
    Eric Dumazet.

 8) Use per-task page fragment allocator in skb_append_datato_frags(),
    also from Eric Dumazet.

 9) Add support for connection tracking labels in netfilter, from
    Florian Westphal.

10) Fix default multicast group joining on ipv6, and add anti-spoofing
    checks to 6to4 and 6rd.  From Hannes Frederic Sowa.

11) Make ipv4/ipv6 fragmentation memory limits more reasonable in modern
    times, rearrange inet frag datastructures for better cacheline
    locality, and move more operations outside of locking.  From Jesper
    Dangaard Brouer.

12) Instead of strict master <--> slave relationships, allow arbitrary
    scenerios with "upper device lists".  From Jiri Pirko.

13) Improve rate limiting accuracy in TBF and act_police, also from Jiri
    Pirko.

14) Add a BPF filter netfilter match target, from Willem de Bruijn.

15) Orphan and delete a bunch of pre-historic networking drivers from
    Paul Gortmaker.

16) Add TSO support for GRE tunnels, from Pravin B SHelar.  Although
    this still needs some minor bug fixing before it's %100 correct in
    all cases.

17) Handle unresolved IPSEC states like ARP, with a resolution packet
    queue.  From Steffen Klassert.

18) Remove TCP Appropriate Byte Count support (ABC), from Stephen
    Hemminger.  This was long overdue.

19) Support SO_REUSEPORT, from Tom Herbert.

20) Allow locking a socket BPF filter, so that it cannot change after a
    process drops capabilities.

21) Add VLAN filtering to bridge, from Vlad Yasevich.

22) Bring ipv6 on-par with ipv4 and do not cache neighbour entries in
    the ipv6 routes, from YOSHIFUJI Hideaki.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1538 commits)
  ipv6: fix race condition regarding dst->expires and dst->from.
  net: fix a wrong assignment in skb_split()
  ip_gre: remove an extra dst_release()
  ppp: set qdisc_tx_busylock to avoid LOCKDEP splat
  atl1c: restore buffer state
  net: fix a build failure when !CONFIG_PROC_FS
  net: ipv4: fix waring -Wunused-variable
  net: proc: fix build failed when procfs is not configured
  Revert "xen: netback: remove redundant xenvif_put"
  net: move procfs code to net/core/net-procfs.c
  qmi_wwan, cdc-ether: add ADU960S
  bonding: set sysfs device_type to 'bond'
  bonding: fix bond_release_all inconsistencies
  b44: use netdev_alloc_skb_ip_align()
  xen: netback: remove redundant xenvif_put
  net: fec: Do a sanity check on the gpio number
  ip_gre: propogate target device GSO capability to the tunnel device
  ip_gre: allow CSUM capable devices to handle packets
  bonding: Fix initialize after use for 3ad machine state spinlock
  bonding: Fix race condition between bond_enslave() and bond_3ad_update_lacp_rate()
  ...

26 files changed, 659 insertions, 481 deletions

diff --git a/include/uapi/asm-generic/socket.h b/include/uapi/asm-generic/socket.h
index 2d32d073a6f..4ef3acbba5d 100644
--- a/include/uapi/asm-generic/socket.h
+++ b/include/uapi/asm-generic/socket.h
@@ -22,8 +22,7 @@
 #define SO_PRIORITY	12
 #define SO_LINGER	13
 #define SO_BSDCOMPAT	14
-/* To add :#define SO_REUSEPORT 15 */
-
+#define SO_REUSEPORT	15
 #ifndef SO_PASSCRED /* powerpc only differs in these */
 #define SO_PASSCRED	16
 #define SO_PEERCRED	17
@@ -73,4 +72,6 @@
 /* Instruct lower device to use last 4-bytes of skb data as FCS */
 #define SO_NOFCS		43
 
+#define SO_LOCK_FILTER		44
+
 #endif /* __ASM_GENERIC_SOCKET_H */
diff --git a/include/uapi/linux/can/gw.h b/include/uapi/linux/can/gw.h
index 8e1db18c3cb..ae07bec74f4 100644
--- a/include/uapi/linux/can/gw.h
+++ b/include/uapi/linux/can/gw.h
@@ -44,6 +44,7 @@ enum {
 	CGW_SRC_IF,	/* ifindex of source network interface */
 	CGW_DST_IF,	/* ifindex of destination network interface */
 	CGW_FILTER,	/* specify struct can_filter on source CAN device */
+	CGW_DELETED,	/* number of deleted CAN frames (see max_hops param) */
 	__CGW_MAX
 };
 
@@ -51,6 +52,7 @@ enum {
 
 #define CGW_FLAGS_CAN_ECHO 0x01
 #define CGW_FLAGS_CAN_SRC_TSTAMP 0x02
+#define CGW_FLAGS_CAN_IIF_TX_OK 0x04
 
 #define CGW_MOD_FUNCS 4 /* AND OR XOR SET */
 
diff --git a/include/uapi/linux/if_bridge.h b/include/uapi/linux/if_bridge.h
index 5db297514ae..2d70d79ce2f 100644
--- a/include/uapi/linux/if_bridge.h
+++ b/include/uapi/linux/if_bridge.h
@@ -108,15 +108,26 @@ struct __fdb_entry {
  * [IFLA_AF_SPEC] = {
  *     [IFLA_BRIDGE_FLAGS]
  *     [IFLA_BRIDGE_MODE]
+ *     [IFLA_BRIDGE_VLAN_INFO]
  * }
  */
 enum {
 	IFLA_BRIDGE_FLAGS,
 	IFLA_BRIDGE_MODE,
+	IFLA_BRIDGE_VLAN_INFO,
 	__IFLA_BRIDGE_MAX,
 };
 #define IFLA_BRIDGE_MAX (__IFLA_BRIDGE_MAX - 1)
 
+#define BRIDGE_VLAN_INFO_MASTER	(1<<0)	/* Operate on Bridge device as well */
+#define BRIDGE_VLAN_INFO_PVID	(1<<1)	/* VLAN is PVID, ingress untagged */
+#define BRIDGE_VLAN_INFO_UNTAGGED	(1<<2)	/* VLAN egresses untagged */
+
+struct bridge_vlan_info {
+	__u16 flags;
+	__u16 vid;
+};
+
 /* Bridge multicast database attributes
  * [MDBA_MDB] = {
  *     [MDBA_MDB_ENTRY] = {
diff --git a/include/uapi/linux/if_ether.h b/include/uapi/linux/if_ether.h
index 67fb87ca109..798032d0111 100644
--- a/include/uapi/linux/if_ether.h
+++ b/include/uapi/linux/if_ether.h
@@ -83,6 +83,7 @@
 #define ETH_P_802_EX1	0x88B5		/* 802.1 Local Experimental 1.  */
 #define ETH_P_TIPC	0x88CA		/* TIPC 			*/
 #define ETH_P_8021AH	0x88E7          /* 802.1ah Backbone Service Tag */
+#define ETH_P_MVRP	0x88F5          /* 802.1Q MVRP                  */
 #define ETH_P_1588	0x88F7		/* IEEE 1588 Timesync */
 #define ETH_P_FCOE	0x8906		/* Fibre Channel over Ethernet  */
 #define ETH_P_TDLS	0x890D          /* TDLS */
diff --git a/include/uapi/linux/if_link.h b/include/uapi/linux/if_link.h
index 60f3b6b9060..c4edfe11f1f 100644
--- a/include/uapi/linux/if_link.h
+++ b/include/uapi/linux/if_link.h
@@ -142,6 +142,7 @@ enum {
 #define IFLA_PROMISCUITY IFLA_PROMISCUITY
 	IFLA_NUM_TX_QUEUES,
 	IFLA_NUM_RX_QUEUES,
+	IFLA_CARRIER,
 	__IFLA_MAX
 };
 
diff --git a/include/uapi/linux/if_vlan.h b/include/uapi/linux/if_vlan.h
index 0744f8e65d1..7e5e6b39733 100644
--- a/include/uapi/linux/if_vlan.h
+++ b/include/uapi/linux/if_vlan.h
@@ -34,6 +34,7 @@ enum vlan_flags {
 	VLAN_FLAG_REORDER_HDR	= 0x1,
 	VLAN_FLAG_GVRP		= 0x2,
 	VLAN_FLAG_LOOSE_BINDING	= 0x4,
+	VLAN_FLAG_MVRP		= 0x8,
 };
 
 enum vlan_name_types {
diff --git a/include/uapi/linux/in6.h b/include/uapi/linux/in6.h
index f79c3721da6..53b1d56a6e7 100644
--- a/include/uapi/linux/in6.h
+++ b/include/uapi/linux/in6.h
@@ -38,11 +38,6 @@ struct in6_addr {
 #define s6_addr32		in6_u.u6_addr32
 };
 
-/* IPv6 Wildcard Address (::) and Loopback Address (::1) defined in RFC2553
- * NOTE: Be aware the IN6ADDR_* constants and in6addr_* externals are defined
- * in network byte order, not in host byte order as are the IPv4 equivalents
- */
-
 struct sockaddr_in6 {
 	unsigned short int	sin6_family;    /* AF_INET6 */
 	__be16			sin6_port;      /* Transport layer port # */
@@ -264,17 +259,10 @@ struct in6_flowlabel_req {
 
 /*
  * Multicast Routing:
- * see include/linux/mroute6.h.
+ * see include/uapi/linux/mroute6.h.
  *
- * MRT6_INIT			200
- * MRT6_DONE			201
- * MRT6_ADD_MIF			202
- * MRT6_DEL_MIF			203
- * MRT6_ADD_MFC			204
- * MRT6_DEL_MFC			205
- * MRT6_VERSION			206
- * MRT6_ASSERT			207
- * MRT6_PIM			208
- * (reserved)			209
+ * MRT6_BASE			200
+ * ...
+ * MRT6_MAX
  */
 #endif /* _UAPI_LINUX_IN6_H */
diff --git a/include/uapi/linux/ipv6.h b/include/uapi/linux/ipv6.h
index 5a2991cf025..4bda4cf5b0f 100644
--- a/include/uapi/linux/ipv6.h
+++ b/include/uapi/linux/ipv6.h
@@ -63,6 +63,8 @@ struct ipv6_opt_hdr {
 #define ipv6_destopt_hdr ipv6_opt_hdr
 #define ipv6_hopopt_hdr  ipv6_opt_hdr
 
+/* Router Alert option values (RFC2711) */
+#define IPV6_OPT_ROUTERALERT_MLD	0x0000	/* MLD(RFC2710) */
 
 /*
  *	routing header type 0 (used in cmsghdr struct)
diff --git a/include/uapi/linux/mroute.h b/include/uapi/linux/mroute.h
index 16929993acc..a382d2c04a4 100644
--- a/include/uapi/linux/mroute.h
+++ b/include/uapi/linux/mroute.h
@@ -26,6 +26,9 @@
 #define MRT_ASSERT	(MRT_BASE+7)	/* Activate PIM assert mode		*/
 #define MRT_PIM		(MRT_BASE+8)	/* enable PIM code			*/
 #define MRT_TABLE	(MRT_BASE+9)	/* Specify mroute table ID		*/
+#define MRT_ADD_MFC_PROXY	(MRT_BASE+10)	/* Add a (*,*|G) mfc entry	*/
+#define MRT_DEL_MFC_PROXY	(MRT_BASE+11)	/* Del a (*,*|G) mfc entry	*/
+#define MRT_MAX		(MRT_BASE+11)
 
 #define SIOCGETVIFCNT	SIOCPROTOPRIVATE	/* IP protocol privates */
 #define SIOCGETSGCNT	(SIOCPROTOPRIVATE+1)
diff --git a/include/uapi/linux/mroute6.h b/include/uapi/linux/mroute6.h
index 3e89b5e7f9e..ce91215cf7e 100644
--- a/include/uapi/linux/mroute6.h
+++ b/include/uapi/linux/mroute6.h
@@ -26,6 +26,9 @@
 #define MRT6_ASSERT	(MRT6_BASE+7)	/* Activate PIM assert mode		*/
 #define MRT6_PIM	(MRT6_BASE+8)	/* enable PIM code			*/
 #define MRT6_TABLE	(MRT6_BASE+9)	/* Specify mroute table ID		*/
+#define MRT6_ADD_MFC_PROXY	(MRT6_BASE+10)	/* Add a (*,*|G) mfc entry	*/
+#define MRT6_DEL_MFC_PROXY	(MRT6_BASE+11)	/* Del a (*,*|G) mfc entry	*/
+#define MRT6_MAX	(MRT6_BASE+11)
 
 #define SIOCGETMIFCNT_IN6	SIOCPROTOPRIVATE	/* IP protocol privates */
 #define SIOCGETSGCNT_IN6	(SIOCPROTOPRIVATE+1)
diff --git a/include/uapi/linux/neighbour.h b/include/uapi/linux/neighbour.h
index 275e5d65dcb..adb068c53c4 100644
--- a/include/uapi/linux/neighbour.h
+++ b/include/uapi/linux/neighbour.h
@@ -20,6 +20,7 @@ enum {
 	NDA_LLADDR,
 	NDA_CACHEINFO,
 	NDA_PROBES,
+	NDA_VLAN,
 	__NDA_MAX
 };
 
diff --git a/include/uapi/linux/netfilter/Kbuild b/include/uapi/linux/netfilter/Kbuild
index 08f555fef13..41115776d76 100644
--- a/include/uapi/linux/netfilter/Kbuild
+++ b/include/uapi/linux/netfilter/Kbuild
@@ -35,9 +35,11 @@ header-y += xt_TCPOPTSTRIP.h
 header-y += xt_TEE.h
 header-y += xt_TPROXY.h
 header-y += xt_addrtype.h
+header-y += xt_bpf.h
 header-y += xt_cluster.h
 header-y += xt_comment.h
 header-y += xt_connbytes.h
+header-y += xt_connlabel.h
 header-y += xt_connlimit.h
 header-y += xt_connmark.h
 header-y += xt_conntrack.h
diff --git a/include/uapi/linux/netfilter/nf_conntrack_common.h b/include/uapi/linux/netfilter/nf_conntrack_common.h
index 1644cdd8be9..d69483fb382 100644
--- a/include/uapi/linux/netfilter/nf_conntrack_common.h
+++ b/include/uapi/linux/netfilter/nf_conntrack_common.h
@@ -101,6 +101,7 @@ enum ip_conntrack_events {
 	IPCT_MARK,		/* new mark has been set */
 	IPCT_NATSEQADJ,		/* NAT is doing sequence adjustment */
 	IPCT_SECMARK,		/* new security mark has been set */
+	IPCT_LABEL,		/* new connlabel has been set */
 };
 
 enum ip_conntrack_expect_events {
diff --git a/include/uapi/linux/netfilter/nfnetlink_conntrack.h b/include/uapi/linux/netfilter/nfnetlink_conntrack.h
index 86e930cf3df..08fabc6c93f 100644
--- a/include/uapi/linux/netfilter/nfnetlink_conntrack.h
+++ b/include/uapi/linux/netfilter/nfnetlink_conntrack.h
@@ -49,6 +49,8 @@ enum ctattr_type {
 	CTA_SECCTX,
 	CTA_TIMESTAMP,
 	CTA_MARK_MASK,
+	CTA_LABELS,
+	CTA_LABELS_MASK,
 	__CTA_MAX
 };
 #define CTA_MAX (__CTA_MAX - 1)
diff --git a/include/uapi/linux/netfilter/xt_CT.h b/include/uapi/linux/netfilter/xt_CT.h
index a064b8af360..5a688c1ca4d 100644
--- a/include/uapi/linux/netfilter/xt_CT.h
+++ b/include/uapi/linux/netfilter/xt_CT.h
@@ -3,7 +3,11 @@
 
 #include <linux/types.h>
 
-#define XT_CT_NOTRACK	0x1
+enum {
+	XT_CT_NOTRACK		= 1 << 0,
+	XT_CT_NOTRACK_ALIAS	= 1 << 1,
+	XT_CT_MASK		= XT_CT_NOTRACK | XT_CT_NOTRACK_ALIAS,
+};
 
 struct xt_ct_target_info {
 	__u16 flags;
diff --git a/include/uapi/linux/netfilter/xt_bpf.h b/include/uapi/linux/netfilter/xt_bpf.h
new file mode 100644
index 00000000000..5dda450eb55
--- /dev/null
+++ b/include/uapi/linux/netfilter/xt_bpf.h
@@ -0,0 +1,17 @@
+#ifndef _XT_BPF_H
+#define _XT_BPF_H
+
+#include <linux/filter.h>
+#include <linux/types.h>
+
+#define XT_BPF_MAX_NUM_INSTR	64
+
+struct xt_bpf_info {
+	__u16 bpf_program_num_elem;
+	struct sock_filter bpf_program[XT_BPF_MAX_NUM_INSTR];
+
+	/* only used in the kernel */
+	struct sk_filter *filter __attribute__((aligned(8)));
+};
+
+#endif /*_XT_BPF_H */
diff --git a/include/uapi/linux/netfilter/xt_connlabel.h b/include/uapi/linux/netfilter/xt_connlabel.h
new file mode 100644
index 00000000000..c4bc9ee9b33
--- /dev/null
+++ b/include/uapi/linux/netfilter/xt_connlabel.h
@@ -0,0 +1,12 @@
+#include <linux/types.h>
+
+#define XT_CONNLABEL_MAXBIT 127
+enum xt_connlabel_mtopts {
+	XT_CONNLABEL_OP_INVERT = 1 << 0,
+	XT_CONNLABEL_OP_SET    = 1 << 1,
+};
+
+struct xt_connlabel_mtinfo {
+	__u16 bit;
+	__u16 options;
+};
diff --git a/include/uapi/linux/netfilter/xt_conntrack.h b/include/uapi/linux/netfilter/xt_conntrack.h
index e3c041d5402..e5bd3083a84 100644
--- a/include/uapi/linux/netfilter/xt_conntrack.h
+++ b/include/uapi/linux/netfilter/xt_conntrack.h
@@ -31,6 +31,7 @@ enum {
 	XT_CONNTRACK_REPLSRC_PORT = 1 << 10,
 	XT_CONNTRACK_REPLDST_PORT = 1 << 11,
 	XT_CONNTRACK_DIRECTION    = 1 << 12,
+	XT_CONNTRACK_STATE_ALIAS  = 1 << 13,
 };
 
 struct xt_conntrack_mtinfo1 {
diff --git a/include/uapi/linux/nfc.h b/include/uapi/linux/nfc.h
index 0e63cee8d81..7969f46f1bb 100644
--- a/include/uapi/linux/nfc.h
+++ b/include/uapi/linux/nfc.h
@@ -5,20 +5,17 @@
  *    Lauro Ramos Venancio <lauro.venancio@openbossa.org>
  *    Aloisio Almeida Jr <aloisio.almeida@openbossa.org>
  *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
  *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the
- * Free Software Foundation, Inc.,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
  */
 
 #ifndef __LINUX_NFC_H
@@ -67,6 +64,11 @@
  *	subsequent CONNECT and CC messages.
  *	If one of the passed parameters is wrong none is set and -EINVAL is
  *	returned.
+ * @NFC_CMD_ENABLE_SE: Enable the physical link to a specific secure element.
+ *	Once enabled a secure element will handle card emulation mode, i.e.
+ *	starting a poll from a device which has a secure element enabled means
+ *	we want to do SE based card emulation.
+ * @NFC_CMD_DISABLE_SE: Disable the physical link to a specific secure element.
  */
 enum nfc_commands {
 	NFC_CMD_UNSPEC,
@@ -86,6 +88,8 @@ enum nfc_commands {
 	NFC_EVENT_TM_DEACTIVATED,
 	NFC_CMD_LLC_GET_PARAMS,
 	NFC_CMD_LLC_SET_PARAMS,
+	NFC_CMD_ENABLE_SE,
+	NFC_CMD_DISABLE_SE,
 /* private: internal use only */
 	__NFC_CMD_AFTER_LAST
 };
@@ -114,6 +118,7 @@ enum nfc_commands {
  * @NFC_ATTR_LLC_PARAM_LTO: Link TimeOut parameter
  * @NFC_ATTR_LLC_PARAM_RW: Receive Window size parameter
  * @NFC_ATTR_LLC_PARAM_MIUX: MIU eXtension parameter
+ * @NFC_ATTR_SE: Available Secure Elements
  */
 enum nfc_attrs {
 	NFC_ATTR_UNSPEC,
@@ -134,6 +139,7 @@ enum nfc_attrs {
 	NFC_ATTR_LLC_PARAM_LTO,
 	NFC_ATTR_LLC_PARAM_RW,
 	NFC_ATTR_LLC_PARAM_MIUX,
+	NFC_ATTR_SE,
 /* private: internal use only */
 	__NFC_ATTR_AFTER_LAST
 };
@@ -172,6 +178,11 @@ enum nfc_attrs {
 #define NFC_PROTO_NFC_DEP_MASK	  (1 << NFC_PROTO_NFC_DEP)
 #define NFC_PROTO_ISO14443_B_MASK (1 << NFC_PROTO_ISO14443_B)
 
+/* NFC Secure Elements */
+#define NFC_SE_NONE     0x0
+#define NFC_SE_UICC     0x1
+#define NFC_SE_EMBEDDED 0x2
+
 struct sockaddr_nfc {
 	sa_family_t sa_family;
 	__u32 dev_idx;
diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h
index e3e19f8b16f..c46bb016f4e 100644
--- a/include/uapi/linux/nl80211.h
+++ b/include/uapi/linux/nl80211.h
@@ -170,7 +170,8 @@
  *	%NL80211_ATTR_HIDDEN_SSID, %NL80211_ATTR_CIPHERS_PAIRWISE,
  *	%NL80211_ATTR_CIPHER_GROUP, %NL80211_ATTR_WPA_VERSIONS,
  *	%NL80211_ATTR_AKM_SUITES, %NL80211_ATTR_PRIVACY,
- *	%NL80211_ATTR_AUTH_TYPE and %NL80211_ATTR_INACTIVITY_TIMEOUT.
+ *	%NL80211_ATTR_AUTH_TYPE, %NL80211_ATTR_INACTIVITY_TIMEOUT,
+ *	%NL80211_ATTR_ACL_POLICY and %NL80211_ATTR_MAC_ADDRS.
  *	The channel to use can be set on the interface or be given using the
  *	%NL80211_ATTR_WIPHY_FREQ and the attributes determining channel width.
  * @NL80211_CMD_NEW_BEACON: old alias for %NL80211_CMD_START_AP
@@ -374,8 +375,8 @@
  *	requests to connect to a specified network but without separating
  *	auth and assoc steps. For this, you need to specify the SSID in a
  *	%NL80211_ATTR_SSID attribute, and can optionally specify the association
- *	IEs in %NL80211_ATTR_IE, %NL80211_ATTR_AUTH_TYPE, %NL80211_ATTR_MAC,
- *	%NL80211_ATTR_WIPHY_FREQ, %NL80211_ATTR_CONTROL_PORT,
+ *	IEs in %NL80211_ATTR_IE, %NL80211_ATTR_AUTH_TYPE, %NL80211_ATTR_USE_MFP,
+ *	%NL80211_ATTR_MAC, %NL80211_ATTR_WIPHY_FREQ, %NL80211_ATTR_CONTROL_PORT,
  *	%NL80211_ATTR_CONTROL_PORT_ETHERTYPE and
  *	%NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT.
  *	Background scan period can optionally be
@@ -512,6 +513,12 @@
  *	command with the %NL80211_ATTR_WOWLAN_TRIGGERS attribute. For
  *	more background information, see
  *	http://wireless.kernel.org/en/users/Documentation/WoWLAN.
+ *	The @NL80211_CMD_SET_WOWLAN command can also be used as a notification
+ *	from the driver reporting the wakeup reason. In this case, the
+ *	@NL80211_ATTR_WOWLAN_TRIGGERS attribute will contain the reason
+ *	for the wakeup, if it was caused by wireless. If it is not present
+ *	in the wakeup notification, the wireless device didn't cause the
+ *	wakeup but reports that it was woken up.
  *
  * @NL80211_CMD_SET_REKEY_OFFLOAD: This command is used give the driver
  *	the necessary information for supporting GTK rekey offload. This
@@ -586,6 +593,24 @@
  * @NL80211_CMD_SET_MCAST_RATE: Change the rate used to send multicast frames
  *	for IBSS or MESH vif.
  *
+ * @NL80211_CMD_SET_MAC_ACL: sets ACL for MAC address based access control.
+ *	This is to be used with the drivers advertising the support of MAC
+ *	address based access control. List of MAC addresses is passed in
+ *	%NL80211_ATTR_MAC_ADDRS and ACL policy is passed in
+ *	%NL80211_ATTR_ACL_POLICY. Driver will enable ACL with this list, if it
+ *	is not already done. The new list will replace any existing list. Driver
+ *	will clear its ACL when the list of MAC addresses passed is empty. This
+ *	command is used in AP/P2P GO mode. Driver has to make sure to clear its
+ *	ACL list during %NL80211_CMD_STOP_AP.
+ *
+ * @NL80211_CMD_RADAR_DETECT: Start a Channel availability check (CAC). Once
+ *	a radar is detected or the channel availability scan (CAC) has finished
+ *	or was aborted, or a radar was detected, usermode will be notified with
+ *	this event. This command is also used to notify userspace about radars
+ *	while operating on this channel.
+ *	%NL80211_ATTR_RADAR_EVENT is used to inform about the type of the
+ *	event.
+ *
  * @NL80211_CMD_MAX: highest used command number
  * @__NL80211_CMD_AFTER_LAST: internal use
  */
@@ -736,6 +761,10 @@ enum nl80211_commands {
 
 	NL80211_CMD_SET_MCAST_RATE,
 
+	NL80211_CMD_SET_MAC_ACL,
+
+	NL80211_CMD_RADAR_DETECT,
+
 	/* add new commands above here */
 
 	/* used to define NL80211_CMD_MAX below */
@@ -958,7 +987,7 @@ enum nl80211_commands {
  * @NL80211_ATTR_USE_MFP: Whether management frame protection (IEEE 802.11w) is
  *	used for the association (&enum nl80211_mfp, represented as a u32);
  *	this attribute can be used
- *	with %NL80211_CMD_ASSOCIATE request
+ *	with %NL80211_CMD_ASSOCIATE and %NL80211_CMD_CONNECT requests
  *
  * @NL80211_ATTR_STA_FLAGS2: Attribute containing a
  *	&struct nl80211_sta_flag_update.
@@ -1310,6 +1339,35 @@ enum nl80211_commands {
  *	if not given in START_AP 0 is assumed, if not given in SET_BSS
  *	no change is made.
  *
+ * @NL80211_ATTR_LOCAL_MESH_POWER_MODE: local mesh STA link-specific power mode
+ *	defined in &enum nl80211_mesh_power_mode.
+ *
+ * @NL80211_ATTR_ACL_POLICY: ACL policy, see &enum nl80211_acl_policy,
+ *	carried in a u32 attribute
+ *
+ * @NL80211_ATTR_MAC_ADDRS: Array of nested MAC addresses, used for
+ *	MAC ACL.
+ *
+ * @NL80211_ATTR_MAC_ACL_MAX: u32 attribute to advertise the maximum
+ *	number of MAC addresses that a device can support for MAC
+ *	ACL.
+ *
+ * @NL80211_ATTR_RADAR_EVENT: Type of radar event for notification to userspace,
+ *	contains a value of enum nl80211_radar_event (u32).
+ *
+ * @NL80211_ATTR_EXT_CAPA: 802.11 extended capabilities that the kernel driver
+ *	has and handles. The format is the same as the IE contents. See
+ *	802.11-2012 8.4.2.29 for more information.
+ * @NL80211_ATTR_EXT_CAPA_MASK: Extended capabilities that the kernel driver
+ *	has set in the %NL80211_ATTR_EXT_CAPA value, for multibit fields.
+ *
+ * @NL80211_ATTR_STA_CAPABILITY: Station capabilities (u16) are advertised to
+ *	the driver, e.g., to enable TDLS power save (PU-APSD).
+ *
+ * @NL80211_ATTR_STA_EXT_CAPABILITY: Station extended capabilities are
+ *	advertised to the driver, e.g., to enable TDLS off channel operations
+ *	and PU-APSD.
+ *
  * @NL80211_ATTR_MAX: highest attribute number currently defined
  * @__NL80211_ATTR_AFTER_LAST: internal use
  */
@@ -1580,6 +1638,22 @@ enum nl80211_attrs {
 	NL80211_ATTR_P2P_CTWINDOW,
 	NL80211_ATTR_P2P_OPPPS,
 
+	NL80211_ATTR_LOCAL_MESH_POWER_MODE,
+
+	NL80211_ATTR_ACL_POLICY,
+
+	NL80211_ATTR_MAC_ADDRS,
+
+	NL80211_ATTR_MAC_ACL_MAX,
+
+	NL80211_ATTR_RADAR_EVENT,
+
+	NL80211_ATTR_EXT_CAPA,
+	NL80211_ATTR_EXT_CAPA_MASK,
+
+	NL80211_ATTR_STA_CAPABILITY,
+	NL80211_ATTR_STA_EXT_CAPABILITY,
+
 	/* add attributes here, update the policy in nl80211.c */
 
 	__NL80211_ATTR_AFTER_LAST,
@@ -1697,6 +1771,9 @@ enum nl80211_iftype {
  *	flag can't be changed, it is only valid while adding a station, and
  *	attempts to change it will silently be ignored (rather than rejected
  *	as errors.)
+ * @NL80211_STA_FLAG_ASSOCIATED: station is associated; used with drivers
+ *	that support %NL80211_FEATURE_FULL_AP_CLIENT_STATE to transition a
+ *	previously added station into associated state
  * @NL80211_STA_FLAG_MAX: highest station flag number currently defined
  * @__NL80211_STA_FLAG_AFTER_LAST: internal use
  */
@@ -1708,6 +1785,7 @@ enum nl80211_sta_flags {
 	NL80211_STA_FLAG_MFP,
 	NL80211_STA_FLAG_AUTHENTICATED,
 	NL80211_STA_FLAG_TDLS_PEER,
+	NL80211_STA_FLAG_ASSOCIATED,
 
 	/* keep last */
 	__NL80211_STA_FLAG_AFTER_LAST,
@@ -1813,6 +1891,8 @@ enum nl80211_sta_bss_param {
  * @NL80211_STA_INFO_INACTIVE_TIME: time since last activity (u32, msecs)
  * @NL80211_STA_INFO_RX_BYTES: total received bytes (u32, from this station)
  * @NL80211_STA_INFO_TX_BYTES: total transmitted bytes (u32, to this station)
+ * @NL80211_STA_INFO_RX_BYTES64: total received bytes (u64, from this station)
+ * @NL80211_STA_INFO_TX_BYTES64: total transmitted bytes (u64, to this station)
  * @NL80211_STA_INFO_SIGNAL: signal strength of last received PPDU (u8, dBm)
  * @NL80211_STA_INFO_TX_BITRATE: current unicast tx rate, nested attribute
  * 	containing info as possible, see &enum nl80211_rate_info
@@ -1834,6 +1914,10 @@ enum nl80211_sta_bss_param {
  * @NL80211_STA_INFO_STA_FLAGS: Contains a struct nl80211_sta_flag_update.
  * @NL80211_STA_INFO_BEACON_LOSS: count of times beacon loss was detected (u32)
  * @NL80211_STA_INFO_T_OFFSET: timing offset with respect to this STA (s64)
+ * @NL80211_STA_INFO_LOCAL_PM: local mesh STA link-specific power mode
+ * @NL80211_STA_INFO_PEER_PM: peer mesh STA link-specific power mode
+ * @NL80211_STA_INFO_NONPEER_PM: neighbor mesh STA power save mode towards
+ *	non-peer STA
  * @__NL80211_STA_INFO_AFTER_LAST: internal
  * @NL80211_STA_INFO_MAX: highest possible station info attribute
  */
@@ -1858,6 +1942,11 @@ enum nl80211_sta_info {
 	NL80211_STA_INFO_STA_FLAGS,
 	NL80211_STA_INFO_BEACON_LOSS,
 	NL80211_STA_INFO_T_OFFSET,
+	NL80211_STA_INFO_LOCAL_PM,
+	NL80211_STA_INFO_PEER_PM,
+	NL80211_STA_INFO_NONPEER_PM,
+	NL80211_STA_INFO_RX_BYTES64,
+	NL80211_STA_INFO_TX_BYTES64,
 
 	/* keep last */
 	__NL80211_STA_INFO_AFTER_LAST,
@@ -1967,6 +2056,20 @@ enum nl80211_band_attr {
  *	on this channel in current regulatory domain.
  * @NL80211_FREQUENCY_ATTR_MAX_TX_POWER: Maximum transmission power in mBm
  *	(100 * dBm).
+ * @NL80211_FREQUENCY_ATTR_DFS_STATE: current state for DFS
+ *	(enum nl80211_dfs_state)
+ * @NL80211_FREQUENCY_ATTR_DFS_TIME: time in miliseconds for how long
+ *	this channel is in this DFS state.
+ * @NL80211_FREQUENCY_ATTR_NO_HT40_MINUS: HT40- isn't possible with this
+ *	channel as the control channel
+ * @NL80211_FREQUENCY_ATTR_NO_HT40_PLUS: HT40+ isn't possible with this
+ *	channel as the control channel
+ * @NL80211_FREQUENCY_ATTR_NO_80MHZ: any 80 MHz channel using this channel
+ *	as the primary or any of the secondary channels isn't possible,
+ *	this includes 80+80 channels
+ * @NL80211_FREQUENCY_ATTR_NO_160MHZ: any 160 MHz (but not 80+80) channel
+ *	using this channel as the primary or any of the secondary channels
+ *	isn't possible
  * @NL80211_FREQUENCY_ATTR_MAX: highest frequency attribute number
  *	currently defined
  * @__NL80211_FREQUENCY_ATTR_AFTER_LAST: internal use
@@ -1979,6 +2082,12 @@ enum nl80211_frequency_attr {
 	NL80211_FREQUENCY_ATTR_NO_IBSS,
 	NL80211_FREQUENCY_ATTR_RADAR,
 	NL80211_FREQUENCY_ATTR_MAX_TX_POWER,
+	NL80211_FREQUENCY_ATTR_DFS_STATE,
+	NL80211_FREQUENCY_ATTR_DFS_TIME,
+	NL80211_FREQUENCY_ATTR_NO_HT40_MINUS,
+	NL80211_FREQUENCY_ATTR_NO_HT40_PLUS,
+	NL80211_FREQUENCY_ATTR_NO_80MHZ,
+	NL80211_FREQUENCY_ATTR_NO_160MHZ,
 
 	/* keep last */
 	__NL80211_FREQUENCY_ATTR_AFTER_LAST,
@@ -2249,6 +2358,34 @@ enum nl80211_mntr_flags {
 };
 
 /**
+ * enum nl80211_mesh_power_mode - mesh power save modes
+ *
+ * @NL80211_MESH_POWER_UNKNOWN: The mesh power mode of the mesh STA is
+ *	not known or has not been set yet.
+ * @NL80211_MESH_POWER_ACTIVE: Active mesh power mode. The mesh STA is
+ *	in Awake state all the time.
+ * @NL80211_MESH_POWER_LIGHT_SLEEP: Light sleep mode. The mesh STA will
+ *	alternate between Active and Doze states, but will wake up for
+ *	neighbor's beacons.
+ * @NL80211_MESH_POWER_DEEP_SLEEP: Deep sleep mode. The mesh STA will
+ *	alternate between Active and Doze states, but may not wake up
+ *	for neighbor's beacons.
+ *
+ * @__NL80211_MESH_POWER_AFTER_LAST - internal use
+ * @NL80211_MESH_POWER_MAX - highest possible power save level
+ */
+
+enum nl80211_mesh_power_mode {
+	NL80211_MESH_POWER_UNKNOWN,
+	NL80211_MESH_POWER_ACTIVE,
+	NL80211_MESH_POWER_LIGHT_SLEEP,
+	NL80211_MESH_POWER_DEEP_SLEEP,
+
+	__NL80211_MESH_POWER_AFTER_LAST,
+	NL80211_MESH_POWER_MAX = __NL80211_MESH_POWER_AFTER_LAST - 1
+};
+
+/**
  * enum nl80211_meshconf_params - mesh configuration parameters
  *
  * Mesh configuration parameters. These can be changed while the mesh is
@@ -2342,6 +2479,11 @@ enum nl80211_mntr_flags {
  *	(in TUs) during which a mesh STA can send only one Action frame
  *	containing a PREQ element for root path confirmation.
  *
+ * @NL80211_MESHCONF_POWER_MODE: Default mesh power mode for new peer links.
+ *	type &enum nl80211_mesh_power_mode (u32)
+ *
+ * @NL80211_MESHCONF_AWAKE_WINDOW: awake window duration (in TUs)
+ *
  * @__NL80211_MESHCONF_ATTR_AFTER_LAST: internal use
  */
 enum nl80211_meshconf_params {
@@ -2371,6 +2513,8 @@ enum nl80211_meshconf_params {
 	NL80211_MESHCONF_HWMP_PATH_TO_ROOT_TIMEOUT,
 	NL80211_MESHCONF_HWMP_ROOT_INTERVAL,
 	NL80211_MESHCONF_HWMP_CONFIRMATION_INTERVAL,
+	NL80211_MESHCONF_POWER_MODE,
+	NL80211_MESHCONF_AWAKE_WINDOW,
 
 	/* keep last */
 	__NL80211_MESHCONF_ATTR_AFTER_LAST,
@@ -2816,10 +2960,12 @@ enum nl80211_tx_power_setting {
  *	corresponds to the lowest-order bit in the second byte of the mask.
  *	For example: The match 00:xx:00:00:xx:00:00:00:00:xx:xx:xx (where
  *	xx indicates "don't care") would be represented by a pattern of
- *	twelve zero bytes, and a mask of "0xed,0x07".
+ *	twelve zero bytes, and a mask of "0xed,0x01".
  *	Note that the pattern matching is done as though frames were not
  *	802.11 frames but 802.3 frames, i.e. the frame is fully unpacked
  *	first (including SNAP header unpacking) and then matched.
+ * @NL80211_WOWLAN_PKTPAT_OFFSET: packet offset, pattern is matched after
+ *	these fixed number of bytes of received packet
  * @NUM_NL80211_WOWLAN_PKTPAT: number of attributes
  * @MAX_NL80211_WOWLAN_PKTPAT: max attribute number
  */
@@ -2827,6 +2973,7 @@ enum nl80211_wowlan_packet_pattern_attr {
 	__NL80211_WOWLAN_PKTPAT_INVALID,
 	NL80211_WOWLAN_PKTPAT_MASK,
 	NL80211_WOWLAN_PKTPAT_PATTERN,
+	NL80211_WOWLAN_PKTPAT_OFFSET,
 
 	NUM_NL80211_WOWLAN_PKTPAT,
 	MAX_NL80211_WOWLAN_PKTPAT = NUM_NL80211_WOWLAN_PKTPAT - 1,
@@ -2837,6 +2984,7 @@ enum nl80211_wowlan_packet_pattern_attr {
  * @max_patterns: maximum number of patterns supported
  * @min_pattern_len: minimum length of each pattern
  * @max_pattern_len: maximum length of each pattern
+ * @max_pkt_offset: maximum Rx packet offset
  *
  * This struct is carried in %NL80211_WOWLAN_TRIG_PKT_PATTERN when
  * that is part of %NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED in the
@@ -2846,6 +2994,7 @@ struct nl80211_wowlan_pattern_support {
 	__u32 max_patterns;
 	__u32 min_pattern_len;
 	__u32 max_pattern_len;
+	__u32 max_pkt_offset;
 } __attribute__((packed));
 
 /**
@@ -2861,12 +3010,17 @@ struct nl80211_wowlan_pattern_support {
  * @NL80211_WOWLAN_TRIG_PKT_PATTERN: wake up on the specified packet patterns
  *	which are passed in an array of nested attributes, each nested attribute
  *	defining a with attributes from &struct nl80211_wowlan_trig_pkt_pattern.
- *	Each pattern defines a wakeup packet. The matching is done on the MSDU,
- *	i.e. as though the packet was an 802.3 packet, so the pattern matching
- *	is done after the packet is converted to the MSDU.
+ *	Each pattern defines a wakeup packet. Packet offset is associated with
+ *	each pattern which is used while matching the pattern. The matching is
+ *	done on the MSDU, i.e. as though the packet was an 802.3 packet, so the
+ *	pattern matching is done after the packet is converted to the MSDU.
  *
  *	In %NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED, it is a binary attribute
  *	carrying a &struct nl80211_wowlan_pattern_support.
+ *
+ *	When reporting wakeup. it is a u32 attribute containing the 0-based
+ *	index of the pattern that caused the wakeup, in the patterns passed
+ *	to the kernel when configuring.
  * @NL80211_WOWLAN_TRIG_GTK_REKEY_SUPPORTED: Not a real trigger, and cannot be
  *	used when setting, used only to indicate that GTK rekeying is supported
  *	by the device (flag)
@@ -2877,8 +3031,36 @@ struct nl80211_wowlan_pattern_support {
  * @NL80211_WOWLAN_TRIG_4WAY_HANDSHAKE: wake up on 4-way handshake (flag)
  * @NL80211_WOWLAN_TRIG_RFKILL_RELEASE: wake up when rfkill is released
  *	(on devices that have rfkill in the device) (flag)
+ * @NL80211_WOWLAN_TRIG_WAKEUP_PKT_80211: For wakeup reporting only, contains
+ *	the 802.11 packet that caused the wakeup, e.g. a deauth frame. The frame
+ *	may be truncated, the @NL80211_WOWLAN_TRIG_WAKEUP_PKT_80211_LEN
+ *	attribute contains the original length.
+ * @NL80211_WOWLAN_TRIG_WAKEUP_PKT_80211_LEN: Original length of the 802.11
+ *	packet, may be bigger than the @NL80211_WOWLAN_TRIG_WAKEUP_PKT_80211
+ *	attribute if the packet was truncated somewhere.
+ * @NL80211_WOWLAN_TRIG_WAKEUP_PKT_8023: For wakeup reporting only, contains the
+ *	802.11 packet that caused the wakeup, e.g. a magic packet. The frame may
+ *	be truncated, the @NL80211_WOWLAN_TRIG_WAKEUP_PKT_8023_LEN attribute
+ *	contains the original length.
+ * @NL80211_WOWLAN_TRIG_WAKEUP_PKT_8023_LEN: Original length of the 802.3
+ *	packet, may be bigger than the @NL80211_WOWLAN_TRIG_WAKEUP_PKT_8023
+ *	attribute if the packet was truncated somewhere.
+ * @NL80211_WOWLAN_TRIG_TCP_CONNECTION: TCP connection wake, see DOC section
+ *	"TCP connection wakeup" for more details. This is a nested attribute
+ *	containing the exact information for establishing and keeping alive
+ *	the TCP connection.
+ * @NL80211_WOWLAN_TRIG_TCP_WAKEUP_MATCH: For wakeup reporting only, the
+ *	wakeup packet was received on the TCP connection
+ * @NL80211_WOWLAN_TRIG_WAKEUP_TCP_CONNLOST: For wakeup reporting only, the
+ *	TCP connection was lost or failed to be established
+ * @NL80211_WOWLAN_TRIG_WAKEUP_TCP_NOMORETOKENS: For wakeup reporting only,
+ *	the TCP connection ran out of tokens to use for data to send to the
+ *	service
  * @NUM_NL80211_WOWLAN_TRIG: number of wake on wireless triggers
  * @MAX_NL80211_WOWLAN_TRIG: highest wowlan trigger attribute number
+ *
+ * These nested attributes are used to configure the wakeup triggers and
+ * to report the wakeup reason(s).
  */
 enum nl80211_wowlan_triggers {
 	__NL80211_WOWLAN_TRIG_INVALID,
@@ -2891,6 +3073,14 @@ enum nl80211_wowlan_triggers {
 	NL80211_WOWLAN_TRIG_EAP_IDENT_REQUEST,
 	NL80211_WOWLAN_TRIG_4WAY_HANDSHAKE,
 	NL80211_WOWLAN_TRIG_RFKILL_RELEASE,
+	NL80211_WOWLAN_TRIG_WAKEUP_PKT_80211,
+	NL80211_WOWLAN_TRIG_WAKEUP_PKT_80211_LEN,
+	NL80211_WOWLAN_TRIG_WAKEUP_PKT_8023,
+	NL80211_WOWLAN_TRIG_WAKEUP_PKT_8023_LEN,
+	NL80211_WOWLAN_TRIG_TCP_CONNECTION,
+	NL80211_WOWLAN_TRIG_WAKEUP_TCP_MATCH,
+	NL80211_WOWLAN_TRIG_WAKEUP_TCP_CONNLOST,
+	NL80211_WOWLAN_TRIG_WAKEUP_TCP_NOMORETOKENS,
 
 	/* keep last */
 	NUM_NL80211_WOWLAN_TRIG,
@@ -2898,6 +3088,116 @@ enum nl80211_wowlan_triggers {
 };
 
 /**
+ * DOC: TCP connection wakeup
+ *
+ * Some devices can establish a TCP connection in order to be woken up by a
+ * packet coming in from outside their network segment, or behind NAT. If
+ * configured, the device will establish a TCP connection to the given
+ * service, and periodically send data to that service. The first data
+ * packet is usually transmitted after SYN/ACK, also ACKing the SYN/ACK.
+ * The data packets can optionally include a (little endian) sequence
+ * number (in the TCP payload!) that is generated by the device, and, also
+ * optionally, a token from a list of tokens. This serves as a keep-alive
+ * with the service, and for NATed connections, etc.
+ *
+ * During this keep-alive period, the server doesn't send any data to the
+ * client. When receiving data, it is compared against the wakeup pattern
+ * (and mask) and if it matches, the host is woken up. Similarly, if the
+ * connection breaks or cannot be established to start with, the host is
+ * also woken up.
+ *
+ * Developer's note: ARP offload is required for this, otherwise TCP
+ * response packets might not go through correctly.
+ */
+
+/**
+ * struct nl80211_wowlan_tcp_data_seq - WoWLAN TCP data sequence
+ * @start: starting value
+ * @offset: offset of sequence number in packet
+ * @len: length of the sequence value to write, 1 through 4
+ *
+ * Note: don't confuse with the TCP sequence number(s), this is for the
+ * keepalive packet payload. The actual value is written into the packet
+ * in little endian.
+ */
+struct nl80211_wowlan_tcp_data_seq {
+	__u32 start, offset, len;
+};
+
+/**
+ * struct nl80211_wowlan_tcp_data_token - WoWLAN TCP data token config
+ * @offset: offset of token in packet
+ * @len: length of each token
+ * @token_stream: stream of data to be used for the tokens, the length must
+ *	be a multiple of @len for this to make sense
+ */
+struct nl80211_wowlan_tcp_data_token {
+	__u32 offset, len;
+	__u8 token_stream[];
+};
+
+/**
+ * struct nl80211_wowlan_tcp_data_token_feature - data token features
+ * @min_len: minimum token length
+ * @max_len: maximum token length
+ * @bufsize: total available token buffer size (max size of @token_stream)
+ */
+struct nl80211_wowlan_tcp_data_token_feature {
+	__u32 min_len, max_len, bufsize;
+};
+
+/**
+ * enum nl80211_wowlan_tcp_attrs - WoWLAN TCP connection parameters
+ * @__NL80211_WOWLAN_TCP_INVALID: invalid number for nested attributes
+ * @NL80211_WOWLAN_TCP_SRC_IPV4: source IPv4 address (in network byte order)
+ * @NL80211_WOWLAN_TCP_DST_IPV4: destination IPv4 address
+ *	(in network byte order)
+ * @NL80211_WOWLAN_TCP_DST_MAC: destination MAC address, this is given because
+ *	route lookup when configured might be invalid by the time we suspend,
+ *	and doing a route lookup when suspending is no longer possible as it
+ *	might require ARP querying.
+ * @NL80211_WOWLAN_TCP_SRC_PORT: source port (u16); optional, if not given a
+ *	socket and port will be allocated
+ * @NL80211_WOWLAN_TCP_DST_PORT: destination port (u16)
+ * @NL80211_WOWLAN_TCP_DATA_PAYLOAD: data packet payload, at least one byte.
+ *	For feature advertising, a u32 attribute holding the maximum length
+ *	of the data payload.
+ * @NL80211_WOWLAN_TCP_DATA_PAYLOAD_SEQ: data packet sequence configuration
+ *	(if desired), a &struct nl80211_wowlan_tcp_data_seq. For feature
+ *	advertising it is just a flag
+ * @NL80211_WOWLAN_TCP_DATA_PAYLOAD_TOKEN: data packet token configuration,
+ *	see &struct nl80211_wowlan_tcp_data_token and for advertising see
+ *	&struct nl80211_wowlan_tcp_data_token_feature.
+ * @NL80211_WOWLAN_TCP_DATA_INTERVAL: data interval in seconds, maximum
+ *	interval in feature advertising (u32)
+ * @NL80211_WOWLAN_TCP_WAKE_PAYLOAD: wake packet payload, for advertising a
+ *	u32 attribute holding the maximum length
+ * @NL80211_WOWLAN_TCP_WAKE_MASK: Wake packet payload mask, not used for
+ *	feature advertising. The mask works like @NL80211_WOWLAN_PKTPAT_MASK
+ *	but on the TCP payload only.
+ * @NUM_NL80211_WOWLAN_TCP: number of TCP attributes
+ * @MAX_NL80211_WOWLAN_TCP: highest attribute number
+ */
+enum nl80211_wowlan_tcp_attrs {
+	__NL80211_WOWLAN_TCP_INVALID,
+	NL80211_WOWLAN_TCP_SRC_IPV4,
+	NL80211_WOWLAN_TCP_DST_IPV4,
+	NL80211_WOWLAN_TCP_DST_MAC,
+	NL80211_WOWLAN_TCP_SRC_PORT,
+	NL80211_WOWLAN_TCP_DST_PORT,
+	NL80211_WOWLAN_TCP_DATA_PAYLOAD,
+	NL80211_WOWLAN_TCP_DATA_PAYLOAD_SEQ,
+	NL80211_WOWLAN_TCP_DATA_PAYLOAD_TOKEN,
+	NL80211_WOWLAN_TCP_DATA_INTERVAL,
+	NL80211_WOWLAN_TCP_WAKE_PAYLOAD,
+	NL80211_WOWLAN_TCP_WAKE_MASK,
+
+	/* keep last */
+	NUM_NL80211_WOWLAN_TCP,
+	MAX_NL80211_WOWLAN_TCP = NUM_NL80211_WOWLAN_TCP - 1
+};
+
+/**
  * enum nl80211_iface_limit_attrs - limit attributes
  * @NL80211_IFACE_LIMIT_UNSPEC: (reserved)
  * @NL80211_IFACE_LIMIT_MAX: maximum number of interfaces that
@@ -2933,6 +3233,8 @@ enum nl80211_iface_limit_attrs {
  *	the infrastructure network's beacon interval.
  * @NL80211_IFACE_COMB_NUM_CHANNELS: u32 attribute specifying how many
  *	different channels may be used within this group.
+ * @NL80211_IFACE_COMB_RADAR_DETECT_WIDTHS: u32 attribute containing the bitmap
+ *	of supported channel widths for radar detection.
  * @NUM_NL80211_IFACE_COMB: number of attributes
  * @MAX_NL80211_IFACE_COMB: highest attribute number
  *
@@ -2965,6 +3267,7 @@ enum nl80211_if_combination_attrs {
 	NL80211_IFACE_COMB_MAXNUM,
 	NL80211_IFACE_COMB_STA_AP_BI_MATCH,
 	NL80211_IFACE_COMB_NUM_CHANNELS,
+	NL80211_IFACE_COMB_RADAR_DETECT_WIDTHS,
 
 	/* keep last */
 	NUM_NL80211_IFACE_COMB,
@@ -3140,6 +3443,19 @@ enum nl80211_ap_sme_features {
  *	setting
  * @NL80211_FEATURE_P2P_GO_OPPPS: P2P GO implementation supports opportunistic
  *	powersave
+ * @NL80211_FEATURE_FULL_AP_CLIENT_STATE: The driver supports full state
+ *	transitions for AP clients. Without this flag (and if the driver
+ *	doesn't have the AP SME in the device) the driver supports adding
+ *	stations only when they're associated and adds them in associated
+ *	state (to later be transitioned into authorized), with this flag
+ *	they should be added before even sending the authentication reply
+ *	and then transitioned into authenticated, associated and authorized
+ *	states using station flags.
+ *	Note that even for drivers that support this, the default is to add
+ *	stations in authenticated/associated state, so to add unauthenticated
+ *	stations the authenticated/associated bits have to be set in the mask.
+ * @NL80211_FEATURE_ADVERTISE_CHAN_LIMITS: cfg80211 advertises channel limits
+ *	(HT40, VHT 80/160 MHz) if this flag is set
  */
 enum nl80211_feature_flags {
 	NL80211_FEATURE_SK_TX_STATUS			= 1 << 0,
@@ -3155,6 +3471,9 @@ enum nl80211_feature_flags {
 	NL80211_FEATURE_NEED_OBSS_SCAN			= 1 << 10,
 	NL80211_FEATURE_P2P_GO_CTWIN			= 1 << 11,
 	NL80211_FEATURE_P2P_GO_OPPPS			= 1 << 12,
+	/* bit 13 is reserved */
+	NL80211_FEATURE_ADVERTISE_CHAN_LIMITS		= 1 << 14,
+	NL80211_FEATURE_FULL_AP_CLIENT_STATE		= 1 << 15,
 };
 
 /**
@@ -3182,7 +3501,7 @@ enum nl80211_probe_resp_offload_support_attr {
  * enum nl80211_connect_failed_reason - connection request failed reasons
  * @NL80211_CONN_FAIL_MAX_CLIENTS: Maximum number of clients that can be
  *	handled by the AP is reached.
- * @NL80211_CONN_FAIL_BLOCKED_CLIENT: Client's MAC is in the AP's blocklist.
+ * @NL80211_CONN_FAIL_BLOCKED_CLIENT: Connection request is rejected due to ACL.
  */
 enum nl80211_connect_failed_reason {
 	NL80211_CONN_FAIL_MAX_CLIENTS,
@@ -3210,4 +3529,62 @@ enum nl80211_scan_flags {
 	NL80211_SCAN_FLAG_AP				= 1<<2,
 };
 
+/**
+ * enum nl80211_acl_policy - access control policy
+ *
+ * Access control policy is applied on a MAC list set by
+ * %NL80211_CMD_START_AP and %NL80211_CMD_SET_MAC_ACL, to
+ * be used with %NL80211_ATTR_ACL_POLICY.
+ *
+ * @NL80211_ACL_POLICY_ACCEPT_UNLESS_LISTED: Deny stations which are
+ *	listed in ACL, i.e. allow all the stations which are not listed
+ *	in ACL to authenticate.
+ * @NL80211_ACL_POLICY_DENY_UNLESS_LISTED: Allow the stations which are listed
+ *	in ACL, i.e. deny all the stations which are not listed in ACL.
+ */
+enum nl80211_acl_policy {
+	NL80211_ACL_POLICY_ACCEPT_UNLESS_LISTED,
+	NL80211_ACL_POLICY_DENY_UNLESS_LISTED,
+};
+
+/**
+ * enum nl80211_radar_event - type of radar event for DFS operation
+ *
+ * Type of event to be used with NL80211_ATTR_RADAR_EVENT to inform userspace
+ * about detected radars or success of the channel available check (CAC)
+ *
+ * @NL80211_RADAR_DETECTED: A radar pattern has been detected. The channel is
+ *	now unusable.
+ * @NL80211_RADAR_CAC_FINISHED: Channel Availability Check has been finished,
+ *	the channel is now available.
+ * @NL80211_RADAR_CAC_ABORTED: Channel Availability Check has been aborted, no
+ *	change to the channel status.
+ * @NL80211_RADAR_NOP_FINISHED: The Non-Occupancy Period for this channel is
+ *	over, channel becomes usable.
+ */
+enum nl80211_radar_event {
+	NL80211_RADAR_DETECTED,
+	NL80211_RADAR_CAC_FINISHED,
+	NL80211_RADAR_CAC_ABORTED,
+	NL80211_RADAR_NOP_FINISHED,
+};
+
+/**
+ * enum nl80211_dfs_state - DFS states for channels
+ *
+ * Channel states used by the DFS code.
+ *
+ * @IEEE80211_DFS_USABLE: The channel can be used, but channel availability
+ *	check (CAC) must be performed before using it for AP or IBSS.
+ * @IEEE80211_DFS_UNAVAILABLE: A radar has been detected on this channel, it
+ *	is therefore marked as not available.
+ * @IEEE80211_DFS_AVAILABLE: The channel has been CAC checked and is available.
+ */
+
+enum nl80211_dfs_state {
+	NL80211_DFS_USABLE,
+	NL80211_DFS_UNAVAILABLE,
+	NL80211_DFS_AVAILABLE,
+};
+
 #endif /* __LINUX_NL80211_H */
diff --git a/include/uapi/linux/rtnetlink.h b/include/uapi/linux/rtnetlink.h
index 7a5eb196ade..7a2144e1afa 100644
--- a/include/uapi/linux/rtnetlink.h
+++ b/include/uapi/linux/rtnetlink.h
@@ -630,6 +630,7 @@ struct tcamsg {
 
 /* New extended info filters for IFLA_EXT_MASK */
 #define RTEXT_FILTER_VF		(1 << 0)
+#define RTEXT_FILTER_BRVLAN	(1 << 1)
 
 /* End of information exported to user level */
 
diff --git a/include/uapi/linux/snmp.h b/include/uapi/linux/snmp.h
index fdfba235f9f..b49eab89c9f 100644
--- a/include/uapi/linux/snmp.h
+++ b/include/uapi/linux/snmp.h
@@ -278,6 +278,7 @@ enum
 	LINUX_MIB_XFRMOUTPOLDEAD,		/* XfrmOutPolDead */
 	LINUX_MIB_XFRMOUTPOLERROR,		/* XfrmOutPolError */
 	LINUX_MIB_XFRMFWDHDRERROR,		/* XfrmFwdHdrError*/
+	LINUX_MIB_XFRMOUTSTATEINVALID,		/* XfrmOutStateInvalid */
 	__LINUX_MIB_XFRMMAX
 };
 
diff --git a/include/uapi/linux/tcp.h b/include/uapi/linux/tcp.h
index e962faa5ab0..6b1ead0b0c9 100644
--- a/include/uapi/linux/tcp.h
+++ b/include/uapi/linux/tcp.h
@@ -111,6 +111,7 @@ enum {
 #define TCP_QUEUE_SEQ		21
 #define TCP_REPAIR_OPTIONS	22
 #define TCP_FASTOPEN		23	/* Enable FastOpen on listeners */
+#define TCP_TIMESTAMP		24
 
 struct tcp_repair_opt {
 	__u32	opt_code;
diff --git a/include/uapi/linux/virtio_net.h b/include/uapi/linux/virtio_net.h
index 848e3584d7c..a5a8c88753b 100644
--- a/include/uapi/linux/virtio_net.h
+++ b/include/uapi/linux/virtio_net.h
@@ -53,6 +53,7 @@
 					 * network */
 #define VIRTIO_NET_F_MQ	22	/* Device supports Receive Flow
 					 * Steering */
+#define VIRTIO_NET_F_CTRL_MAC_ADDR 23	/* Set MAC address */
 
 #define VIRTIO_NET_S_LINK_UP	1	/* Link is up */
 #define VIRTIO_NET_S_ANNOUNCE	2	/* Announcement is needed */
@@ -127,7 +128,7 @@ typedef __u8 virtio_net_ctrl_ack;
  #define VIRTIO_NET_CTRL_RX_NOBCAST      5
 
 /*
- * Control the MAC filter table.
+ * Control the MAC
  *
  * The MAC filter table is managed by the hypervisor, the guest should
  * assume the size is infinite.  Filtering should be considered
@@ -140,6 +141,10 @@ typedef __u8 virtio_net_ctrl_ack;
  * first sg list contains unicast addresses, the second is for multicast.
  * This functionality is present if the VIRTIO_NET_F_CTRL_RX feature
  * is available.
+ *
+ * The ADDR_SET command requests one out scatterlist, it contains a
+ * 6 bytes MAC address. This functionality is present if the
+ * VIRTIO_NET_F_CTRL_MAC_ADDR feature is available.
  */
 struct virtio_net_ctrl_mac {
 	__u32 entries;
@@ -148,6 +153,7 @@ struct virtio_net_ctrl_mac {
 
 #define VIRTIO_NET_CTRL_MAC    1
  #define VIRTIO_NET_CTRL_MAC_TABLE_SET        0
+ #define VIRTIO_NET_CTRL_MAC_ADDR_SET         1
 
 /*
  * Control VLAN filtering
diff --git a/include/uapi/linux/vm_sockets.h b/include/uapi/linux/vm_sockets.h
new file mode 100644
index 00000000000..df91301847e
--- /dev/null
+++ b/include/uapi/linux/vm_sockets.h
@@ -0,0 +1,163 @@
+/*
+ * VMware vSockets Driver
+ *
+ * Copyright (C) 2007-2013 VMware, Inc. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation version 2 and no later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ */
+
+#ifndef _VM_SOCKETS_H_
+#define _VM_SOCKETS_H_
+
+#if !defined(__KERNEL__)
+#include <sys/socket.h>
+#endif
+
+/* Option name for STREAM socket buffer size.  Use as the option name in
+ * setsockopt(3) or getsockopt(3) to set or get an unsigned long long that
+ * specifies the size of the buffer underlying a vSockets STREAM socket.
+ * Value is clamped to the MIN and MAX.
+ */
+
+#define SO_VM_SOCKETS_BUFFER_SIZE 0
+
+/* Option name for STREAM socket minimum buffer size.  Use as the option name
+ * in setsockopt(3) or getsockopt(3) to set or get an unsigned long long that
+ * specifies the minimum size allowed for the buffer underlying a vSockets
+ * STREAM socket.
+ */
+
+#define SO_VM_SOCKETS_BUFFER_MIN_SIZE 1
+
+/* Option name for STREAM socket maximum buffer size.  Use as the option name
+ * in setsockopt(3) or getsockopt(3) to set or get an unsigned long long
+ * that specifies the maximum size allowed for the buffer underlying a
+ * vSockets STREAM socket.
+ */
+
+#define SO_VM_SOCKETS_BUFFER_MAX_SIZE 2
+
+/* Option name for socket peer's host-specific VM ID.  Use as the option name
+ * in getsockopt(3) to get a host-specific identifier for the peer endpoint's
+ * VM.  The identifier is a signed integer.
+ * Only available for hypervisor endpoints.
+ */
+
+#define SO_VM_SOCKETS_PEER_HOST_VM_ID 3
+
+/* Option name for determining if a socket is trusted.  Use as the option name
+ * in getsockopt(3) to determine if a socket is trusted.  The value is a
+ * signed integer.
+ */
+
+#define SO_VM_SOCKETS_TRUSTED 5
+
+/* Option name for STREAM socket connection timeout.  Use as the option name
+ * in setsockopt(3) or getsockopt(3) to set or get the connection
+ * timeout for a STREAM socket.
+ */
+
+#define SO_VM_SOCKETS_CONNECT_TIMEOUT 6
+
+/* Option name for using non-blocking send/receive.  Use as the option name
+ * for setsockopt(3) or getsockopt(3) to set or get the non-blocking
+ * transmit/receive flag for a STREAM socket.  This flag determines whether
+ * send() and recv() can be called in non-blocking contexts for the given
+ * socket.  The value is a signed integer.
+ *
+ * This option is only relevant to kernel endpoints, where descheduling the
+ * thread of execution is not allowed, for example, while holding a spinlock.
+ * It is not to be confused with conventional non-blocking socket operations.
+ *
+ * Only available for hypervisor endpoints.
+ */
+
+#define SO_VM_SOCKETS_NONBLOCK_TXRX 7
+
+/* The vSocket equivalent of INADDR_ANY.  This works for the svm_cid field of
+ * sockaddr_vm and indicates the context ID of the current endpoint.
+ */
+
+#define VMADDR_CID_ANY -1U
+
+/* Bind to any available port.  Works for the svm_port field of
+ * sockaddr_vm.
+ */
+
+#define VMADDR_PORT_ANY -1U
+
+/* Use this as the destination CID in an address when referring to the
+ * hypervisor.  VMCI relies on it being 0, but this would be useful for other
+ * transports too.
+ */
+
+#define VMADDR_CID_HYPERVISOR 0
+
+/* This CID is specific to VMCI and can be considered reserved (even VMCI
+ * doesn't use it anymore, it's a legacy value from an older release).
+ */
+
+#define VMADDR_CID_RESERVED 1
+
+/* Use this as the destination CID in an address when referring to the host
+ * (any process other than the hypervisor).  VMCI relies on it being 2, but
+ * this would be useful for other transports too.
+ */
+
+#define VMADDR_CID_HOST 2
+
+/* Invalid vSockets version. */
+
+#define VM_SOCKETS_INVALID_VERSION -1U
+
+/* The epoch (first) component of the vSockets version.  A single byte
+ * representing the epoch component of the vSockets version.
+ */
+
+#define VM_SOCKETS_VERSION_EPOCH(_v) (((_v) & 0xFF000000) >> 24)
+
+/* The major (second) component of the vSockets version.   A single byte
+ * representing the major component of the vSockets version.  Typically
+ * changes for every major release of a product.
+ */
+
+#define VM_SOCKETS_VERSION_MAJOR(_v) (((_v) & 0x00FF0000) >> 16)
+
+/* The minor (third) component of the vSockets version.  Two bytes representing
+ * the minor component of the vSockets version.
+ */
+
+#define VM_SOCKETS_VERSION_MINOR(_v) (((_v) & 0x0000FFFF))
+
+/* Address structure for vSockets.   The address family should be set to
+ * whatever vmci_sock_get_af_value_fd() returns.  The structure members should
+ * all align on their natural boundaries without resorting to compiler packing
+ * directives.  The total size of this structure should be exactly the same as
+ * that of struct sockaddr.
+ */
+
+struct sockaddr_vm {
+	sa_family_t svm_family;
+	unsigned short svm_reserved1;
+	unsigned int svm_port;
+	unsigned int svm_cid;
+	unsigned char svm_zero[sizeof(struct sockaddr) -
+			       sizeof(sa_family_t) -
+			       sizeof(unsigned short) -
+			       sizeof(unsigned int) - sizeof(unsigned int)];
+};
+
+#define IOCTL_VM_SOCKETS_GET_LOCAL_CID		_IO(7, 0xb9)
+
+#if defined(__KERNEL__)
+int vm_sockets_get_local_cid(void);
+#endif
+
+#endif
diff --git a/include/uapi/linux/wanrouter.h b/include/uapi/linux/wanrouter.h
index 7617df2833d..498d6c12c66 100644
--- a/include/uapi/linux/wanrouter.h
+++ b/include/uapi/linux/wanrouter.h
@@ -1,363 +1,9 @@
-/*****************************************************************************
-* wanrouter.h	Definitions for the WAN Multiprotocol Router Module.
-*		This module provides API and common services for WAN Link
-*		Drivers and is completely hardware-independent.
-*
-* Author: 	Nenad Corbic <ncorbic@sangoma.com>
-*		Gideon Hack 	
-* Additions:	Arnaldo Melo
-*
-* Copyright:	(c) 1995-2000 Sangoma Technologies Inc.
-*
-*		This program is free software; you can redistribute it and/or
-*		modify it under the terms of the GNU General Public License
-*		as published by the Free Software Foundation; either version
-*		2 of the License, or (at your option) any later version.
-* ============================================================================
-* Jul 21, 2000  Nenad Corbic	Added WAN_FT1_READY State
-* Feb 24, 2000  Nenad Corbic    Added support for socket based x25api
-* Jan 28, 2000  Nenad Corbic    Added support for the ASYNC protocol.
-* Oct 04, 1999  Nenad Corbic 	Updated for 2.1.0 release
-* Jun 02, 1999  Gideon Hack	Added support for the S514 adapter.
-* May 23, 1999	Arnaldo Melo	Added local_addr to wanif_conf_t
-*				WAN_DISCONNECTING state added
-* Jul 20, 1998	David Fong	Added Inverse ARP options to 'wanif_conf_t'
-* Jun 12, 1998	David Fong	Added Cisco HDLC support.
-* Dec 16, 1997	Jaspreet Singh	Moved 'enable_IPX' and 'network_number' to
-*				'wanif_conf_t'
-* Dec 05, 1997	Jaspreet Singh	Added 'pap', 'chap' to 'wanif_conf_t'
-*				Added 'authenticator' to 'wan_ppp_conf_t'
-* Nov 06, 1997	Jaspreet Singh	Changed Router Driver version to 1.1 from 1.0
-* Oct 20, 1997	Jaspreet Singh	Added 'cir','bc','be' and 'mc' to 'wanif_conf_t'
-*				Added 'enable_IPX' and 'network_number' to 
-*				'wan_device_t'.  Also added defines for
-*				UDP PACKET TYPE, Interrupt test, critical values
-*				for RACE conditions.
-* Oct 05, 1997	Jaspreet Singh	Added 'dlci_num' and 'dlci[100]' to 
-*				'wan_fr_conf_t' to configure a list of dlci(s)
-*				for a NODE 
-* Jul 07, 1997	Jaspreet Singh	Added 'ttl' to 'wandev_conf_t' & 'wan_device_t'
-* May 29, 1997 	Jaspreet Singh	Added 'tx_int_enabled' to 'wan_device_t'
-* May 21, 1997	Jaspreet Singh	Added 'udp_port' to 'wan_device_t'
-* Apr 25, 1997  Farhan Thawar   Added 'udp_port' to 'wandev_conf_t'
-* Jan 16, 1997	Gene Kozin	router_devlist made public
-* Jan 02, 1997	Gene Kozin	Initial version (based on wanpipe.h).
-*****************************************************************************/
-
-#ifndef _UAPI_ROUTER_H
-#define _UAPI_ROUTER_H
-
-#define	ROUTER_NAME	"wanrouter"	/* in case we ever change it */
-#define	ROUTER_VERSION	1		/* version number */
-#define	ROUTER_RELEASE	1		/* release (minor version) number */
-#define	ROUTER_IOCTL	'W'		/* for IOCTL calls */
-#define	ROUTER_MAGIC	0x524D4157L	/* signature: 'WANR' reversed */
-
-/* IOCTL codes for /proc/router/<device> entries (up to 255) */
-enum router_ioctls
-{
-	ROUTER_SETUP	= ROUTER_IOCTL<<8,	/* configure device */
-	ROUTER_DOWN,				/* shut down device */
-	ROUTER_STAT,				/* get device status */
-	ROUTER_IFNEW,				/* add interface */
-	ROUTER_IFDEL,				/* delete interface */
-	ROUTER_IFSTAT,				/* get interface status */
-	ROUTER_USER	= (ROUTER_IOCTL<<8)+16,	/* driver-specific calls */
-	ROUTER_USER_MAX	= (ROUTER_IOCTL<<8)+31
-};
-
-/* identifiers for displaying proc file data for dual port adapters */
-#define PROC_DATA_PORT_0 0x8000	/* the data is for port 0 */
-#define PROC_DATA_PORT_1 0x8001	/* the data is for port 1 */
-
-/* NLPID for packet encapsulation (ISO/IEC TR 9577) */
-#define	NLPID_IP	0xCC	/* Internet Protocol Datagram */
-#define	NLPID_SNAP	0x80	/* IEEE Subnetwork Access Protocol */
-#define	NLPID_CLNP	0x81	/* ISO/IEC 8473 */
-#define	NLPID_ESIS	0x82	/* ISO/IEC 9542 */
-#define	NLPID_ISIS	0x83	/* ISO/IEC ISIS */
-#define	NLPID_Q933	0x08	/* CCITT Q.933 */
-
-/* Miscellaneous */
-#define	WAN_IFNAME_SZ	15	/* max length of the interface name */
-#define	WAN_DRVNAME_SZ	15	/* max length of the link driver name */
-#define	WAN_ADDRESS_SZ	31	/* max length of the WAN media address */
-#define USED_BY_FIELD	8	/* max length of the used by field */
-
-/* Defines for UDP PACKET TYPE */
-#define UDP_PTPIPE_TYPE 	0x01
-#define UDP_FPIPE_TYPE		0x02
-#define UDP_CPIPE_TYPE		0x03
-#define UDP_DRVSTATS_TYPE 	0x04
-#define UDP_INVALID_TYPE  	0x05
-
-/* Command return code */
-#define CMD_OK		0		/* normal firmware return code */
-#define CMD_TIMEOUT	0xFF		/* firmware command timed out */
-
-/* UDP Packet Management */
-#define UDP_PKT_FRM_STACK	0x00
-#define UDP_PKT_FRM_NETWORK	0x01
-
-/* Maximum interrupt test counter */
-#define MAX_INTR_TEST_COUNTER	100
-
-/* Critical Values for RACE conditions*/
-#define CRITICAL_IN_ISR		0xA1
-#define CRITICAL_INTR_HANDLED	0xB1
-
-/****** Data Types **********************************************************/
-
-/*----------------------------------------------------------------------------
- * X.25-specific link-level configuration.
- */
-typedef struct wan_x25_conf
-{
-	unsigned lo_pvc;	/* lowest permanent circuit number */
-	unsigned hi_pvc;	/* highest permanent circuit number */
-	unsigned lo_svc;	/* lowest switched circuit number */
-	unsigned hi_svc;	/* highest switched circuit number */
-	unsigned hdlc_window;	/* HDLC window size (1..7) */
-	unsigned pkt_window;	/* X.25 packet window size (1..7) */
-	unsigned t1;		/* HDLC timer T1, sec (1..30) */
-	unsigned t2;		/* HDLC timer T2, sec (0..29) */
-	unsigned t4;		/* HDLC supervisory frame timer = T4 * T1 */
-	unsigned n2;		/* HDLC retransmission limit (1..30) */
-	unsigned t10_t20;	/* X.25 RESTART timeout, sec (1..255) */
-	unsigned t11_t21;	/* X.25 CALL timeout, sec (1..255) */
-	unsigned t12_t22;	/* X.25 RESET timeout, sec (1..255) */
-	unsigned t13_t23;	/* X.25 CLEAR timeout, sec (1..255) */
-	unsigned t16_t26;	/* X.25 INTERRUPT timeout, sec (1..255) */
-	unsigned t28;		/* X.25 REGISTRATION timeout, sec (1..255) */
-	unsigned r10_r20;	/* RESTART retransmission limit (0..250) */
-	unsigned r12_r22;	/* RESET retransmission limit (0..250) */
-	unsigned r13_r23;	/* CLEAR retransmission limit (0..250) */
-	unsigned ccitt_compat;	/* compatibility mode: 1988/1984/1980 */
-	unsigned x25_conf_opt;   /* User defined x25 config optoins */
-	unsigned char LAPB_hdlc_only; /* Run in HDLC only mode */
-	unsigned char logging;   /* Control connection logging */  
-	unsigned char oob_on_modem; /* Whether to send modem status to the user app */
-} wan_x25_conf_t;
-
-/*----------------------------------------------------------------------------
- * Frame relay specific link-level configuration.
- */
-typedef struct wan_fr_conf
-{
-	unsigned signalling;	/* local in-channel signalling type */
-	unsigned t391;		/* link integrity verification timer */
-	unsigned t392;		/* polling verification timer */
-	unsigned n391;		/* full status polling cycle counter */
-	unsigned n392;		/* error threshold counter */
-	unsigned n393;		/* monitored events counter */
-	unsigned dlci_num;	/* number of DLCs (access node) */
-	unsigned  dlci[100];    /* List of all DLCIs */
-} wan_fr_conf_t;
-
-/*----------------------------------------------------------------------------
- * PPP-specific link-level configuration.
- */
-typedef struct wan_ppp_conf
-{
-	unsigned restart_tmr;	/* restart timer */
-	unsigned auth_rsrt_tmr;	/* authentication timer */
-	unsigned auth_wait_tmr;	/* authentication timer */
-	unsigned mdm_fail_tmr;	/* modem failure timer */
-	unsigned dtr_drop_tmr;	/* DTR drop timer */
-	unsigned connect_tmout;	/* connection timeout */
-	unsigned conf_retry;	/* max. retry */
-	unsigned term_retry;	/* max. retry */
-	unsigned fail_retry;	/* max. retry */
-	unsigned auth_retry;	/* max. retry */
-	unsigned auth_options;	/* authentication opt. */
-	unsigned ip_options;	/* IP options */
-	char	authenticator;	/* AUTHENTICATOR or not */
-	char	ip_mode;	/* Static/Host/Peer */
-} wan_ppp_conf_t;
-
-/*----------------------------------------------------------------------------
- * CHDLC-specific link-level configuration.
- */
-typedef struct wan_chdlc_conf
-{
-	unsigned char ignore_dcd;	/* Protocol options:		*/
-	unsigned char ignore_cts;	/*  Ignore these to determine	*/
-	unsigned char ignore_keepalive;	/*  link status (Yes or No)	*/
-	unsigned char hdlc_streaming;	/*  hdlc_streaming mode (Y/N) */
-	unsigned char receive_only;	/*  no transmit buffering (Y/N) */
-	unsigned keepalive_tx_tmr;	/* transmit keepalive timer */
-	unsigned keepalive_rx_tmr;	/* receive  keepalive timer */
-	unsigned keepalive_err_margin;	/* keepalive_error_tolerance */
-	unsigned slarp_timer;		/* SLARP request timer */
-} wan_chdlc_conf_t;
-
-
-/*----------------------------------------------------------------------------
- * WAN device configuration. Passed to ROUTER_SETUP IOCTL.
- */
-typedef struct wandev_conf
-{
-	unsigned magic;		/* magic number (for verification) */
-	unsigned config_id;	/* configuration structure identifier */
-				/****** hardware configuration ******/
-	unsigned ioport;	/* adapter I/O port base */
-	unsigned long maddr;	/* dual-port memory address */
-	unsigned msize;		/* dual-port memory size */
-	int irq;		/* interrupt request level */
-	int dma;		/* DMA request level */
-        char S514_CPU_no[1];	/* S514 PCI adapter CPU number ('A' or 'B') */
-        unsigned PCI_slot_no;	/* S514 PCI adapter slot number */
-	char auto_pci_cfg;	/* S515 PCI automatic slot detection */
-	char comm_port;		/* Communication Port (PRI=0, SEC=1) */ 
-	unsigned bps;		/* data transfer rate */
-	unsigned mtu;		/* maximum transmit unit size */
-        unsigned udp_port;      /* UDP port for management */
-	unsigned char ttl;	/* Time To Live for UDP security */
-	unsigned char ft1;	/* FT1 Configurator Option */
-        char interface;		/* RS-232/V.35, etc. */
-	char clocking;		/* external/internal */
-	char line_coding;	/* NRZ/NRZI/FM0/FM1, etc. */
-	char station;		/* DTE/DCE, primary/secondary, etc. */
-	char connection;	/* permanent/switched/on-demand */
-	char read_mode;		/* read mode: Polling or interrupt */
-	char receive_only;	/* disable tx buffers */
-	char tty;		/* Create a fake tty device */
-	unsigned tty_major;	/* Major number for wanpipe tty device */
-	unsigned tty_minor; 	/* Minor number for wanpipe tty device */
-	unsigned tty_mode;	/* TTY operation mode SYNC or ASYNC */
-	char backup;		/* Backup Mode */
-	unsigned hw_opt[4];	/* other hardware options */
-	unsigned reserved[4];
-				/****** arbitrary data ***************/
-	unsigned data_size;	/* data buffer size */
-	void* data;		/* data buffer, e.g. firmware */
-	union			/****** protocol-specific ************/
-	{
-		wan_x25_conf_t x25;	/* X.25 configuration */
-		wan_ppp_conf_t ppp;	/* PPP configuration */
-		wan_fr_conf_t fr;	/* frame relay configuration */
-		wan_chdlc_conf_t chdlc;	/* Cisco HDLC configuration */
-	} u;
-} wandev_conf_t;
-
-/* 'config_id' definitions */
-#define	WANCONFIG_X25	101	/* X.25 link */
-#define	WANCONFIG_FR	102	/* frame relay link */
-#define	WANCONFIG_PPP	103	/* synchronous PPP link */
-#define WANCONFIG_CHDLC	104	/* Cisco HDLC Link */
-#define WANCONFIG_BSC	105	/* BiSync Streaming */
-#define WANCONFIG_HDLC	106	/* HDLC Support */
-#define WANCONFIG_MPPP  107	/* Multi Port PPP over RAW CHDLC */
-
 /*
- * Configuration options defines.
+ * wanrouter.h	Legacy declarations kept around until X25 is removed
  */
-/* general options */
-#define	WANOPT_OFF	0
-#define	WANOPT_ON	1
-#define	WANOPT_NO	0
-#define	WANOPT_YES	1
-
-/* intercace options */
-#define	WANOPT_RS232	0
-#define	WANOPT_V35	1
-
-/* data encoding options */
-#define	WANOPT_NRZ	0
-#define	WANOPT_NRZI	1
-#define	WANOPT_FM0	2
-#define	WANOPT_FM1	3
-
-/* link type options */
-#define	WANOPT_POINTTOPOINT	0	/* RTS always active */
-#define	WANOPT_MULTIDROP	1	/* RTS is active when transmitting */
-
-/* clocking options */
-#define	WANOPT_EXTERNAL	0
-#define	WANOPT_INTERNAL	1
-
-/* station options */
-#define	WANOPT_DTE		0
-#define	WANOPT_DCE		1
-#define	WANOPT_CPE		0
-#define	WANOPT_NODE		1
-#define	WANOPT_SECONDARY	0
-#define	WANOPT_PRIMARY		1
-
-/* connection options */
-#define	WANOPT_PERMANENT	0	/* DTR always active */
-#define	WANOPT_SWITCHED		1	/* use DTR to setup link (dial-up) */
-#define	WANOPT_ONDEMAND		2	/* activate DTR only before sending */
-
-/* frame relay in-channel signalling */
-#define	WANOPT_FR_ANSI		1	/* ANSI T1.617 Annex D */
-#define	WANOPT_FR_Q933		2	/* ITU Q.933A */
-#define	WANOPT_FR_LMI		3	/* LMI */
-
-/* PPP IP Mode Options */
-#define	WANOPT_PPP_STATIC	0
-#define	WANOPT_PPP_HOST		1
-#define	WANOPT_PPP_PEER		2
-
-/* ASY Mode Options */
-#define WANOPT_ONE 		1
-#define WANOPT_TWO		2
-#define WANOPT_ONE_AND_HALF	3
-
-#define WANOPT_NONE	0
-#define WANOPT_ODD      1
-#define WANOPT_EVEN	2
-
-/* CHDLC Protocol Options */
-/* DF Commented out for now.
-
-#define WANOPT_CHDLC_NO_DCD		IGNORE_DCD_FOR_LINK_STAT
-#define WANOPT_CHDLC_NO_CTS		IGNORE_CTS_FOR_LINK_STAT
-#define WANOPT_CHDLC_NO_KEEPALIVE	IGNORE_KPALV_FOR_LINK_STAT
-*/
-
-/* Port options */
-#define WANOPT_PRI 0
-#define WANOPT_SEC 1
-/* read mode */
-#define	WANOPT_INTR	0
-#define WANOPT_POLL	1
 
-
-#define WANOPT_TTY_SYNC  0
-#define WANOPT_TTY_ASYNC 1
-/*----------------------------------------------------------------------------
- * WAN Link Status Info (for ROUTER_STAT IOCTL).
- */
-typedef struct wandev_stat
-{
-	unsigned state;		/* link state */
-	unsigned ndev;		/* number of configured interfaces */
-
-	/* link/interface configuration */
-	unsigned connection;	/* permanent/switched/on-demand */
-	unsigned media_type;	/* Frame relay/PPP/X.25/SDLC, etc. */
-	unsigned mtu;		/* max. transmit unit for this device */
-
-	/* physical level statistics */
-	unsigned modem_status;	/* modem status */
-	unsigned rx_frames;	/* received frames count */
-	unsigned rx_overruns;	/* receiver overrun error count */
-	unsigned rx_crc_err;	/* receive CRC error count */
-	unsigned rx_aborts;	/* received aborted frames count */
-	unsigned rx_bad_length;	/* unexpetedly long/short frames count */
-	unsigned rx_dropped;	/* frames discarded at device level */
-	unsigned tx_frames;	/* transmitted frames count */
-	unsigned tx_underruns;	/* aborted transmissions (underruns) count */
-	unsigned tx_timeouts;	/* transmission timeouts */
-	unsigned tx_rejects;	/* other transmit errors */
-
-	/* media level statistics */
-	unsigned rx_bad_format;	/* frames with invalid format */
-	unsigned rx_bad_addr;	/* frames with invalid media address */
-	unsigned tx_retries;	/* frames re-transmitted */
-	unsigned reserved[16];	/* reserved for future use */
-} wandev_stat_t;
+#ifndef _UAPI_ROUTER_H
+#define _UAPI_ROUTER_H
 
 /* 'state' defines */
 enum wan_states
@@ -365,88 +11,7 @@ enum wan_states
 	WAN_UNCONFIGURED,	/* link/channel is not configured */
 	WAN_DISCONNECTED,	/* link/channel is disconnected */
 	WAN_CONNECTING,		/* connection is in progress */
-	WAN_CONNECTED,		/* link/channel is operational */
-	WAN_LIMIT,		/* for verification only */
-	WAN_DUALPORT,		/* for Dual Port cards */
-	WAN_DISCONNECTING,
-	WAN_FT1_READY		/* FT1 Configurator Ready */
+	WAN_CONNECTED		/* link/channel is operational */
 };
 
-enum {
-	WAN_LOCAL_IP,
-	WAN_POINTOPOINT_IP,
-	WAN_NETMASK_IP,
-	WAN_BROADCAST_IP
-};
-
-/* 'modem_status' masks */
-#define	WAN_MODEM_CTS	0x0001	/* CTS line active */
-#define	WAN_MODEM_DCD	0x0002	/* DCD line active */
-#define	WAN_MODEM_DTR	0x0010	/* DTR line active */
-#define	WAN_MODEM_RTS	0x0020	/* RTS line active */
-
-/*----------------------------------------------------------------------------
- * WAN interface (logical channel) configuration (for ROUTER_IFNEW IOCTL).
- */
-typedef struct wanif_conf
-{
-	unsigned magic;			/* magic number */
-	unsigned config_id;		/* configuration identifier */
-	char name[WAN_IFNAME_SZ+1];	/* interface name, ASCIIZ */
-	char addr[WAN_ADDRESS_SZ+1];	/* media address, ASCIIZ */
-	char usedby[USED_BY_FIELD];	/* used by API or WANPIPE */
-	unsigned idle_timeout;		/* sec, before disconnecting */
-	unsigned hold_timeout;		/* sec, before re-connecting */
-	unsigned cir;			/* Committed Information Rate fwd,bwd*/
-	unsigned bc;			/* Committed Burst Size fwd, bwd */
-	unsigned be;			/* Excess Burst Size fwd, bwd */ 
-	unsigned char enable_IPX;	/* Enable or Disable IPX */
-	unsigned char inarp;		/* Send Inverse ARP requests Y/N */
-	unsigned inarp_interval;	/* sec, between InARP requests */
-	unsigned long network_number;	/* Network Number for IPX */
-	char mc;			/* Multicast on or off */
-	char local_addr[WAN_ADDRESS_SZ+1];/* local media address, ASCIIZ */
-	unsigned char port;		/* board port */
-	unsigned char protocol;		/* prococol used in this channel (TCPOX25 or X25) */
-	char pap;			/* PAP enabled or disabled */
-	char chap;			/* CHAP enabled or disabled */
-	unsigned char userid[511];	/* List of User Id */
-	unsigned char passwd[511];	/* List of passwords */
-	unsigned char sysname[31];	/* Name of the system */
-	unsigned char ignore_dcd;	/* Protocol options: */
-	unsigned char ignore_cts;	/*  Ignore these to determine */
-	unsigned char ignore_keepalive;	/*  link status (Yes or No) */
-	unsigned char hdlc_streaming;	/*  Hdlc streaming mode (Y/N) */
-	unsigned keepalive_tx_tmr;	/* transmit keepalive timer */
-	unsigned keepalive_rx_tmr;	/* receive  keepalive timer */
-	unsigned keepalive_err_margin;	/* keepalive_error_tolerance */
-	unsigned slarp_timer;		/* SLARP request timer */
-	unsigned char ttl;		/* Time To Live for UDP security */
-	char interface;			/* RS-232/V.35, etc. */
-	char clocking;			/* external/internal */
-	unsigned bps;			/* data transfer rate */
-	unsigned mtu;			/* maximum transmit unit size */
-	unsigned char if_down;		/* brind down interface when disconnected */
-	unsigned char gateway;		/* Is this interface a gateway */
-	unsigned char true_if_encoding;	/* Set the dev->type to true board protocol */
-
-	unsigned char asy_data_trans;     /* async API options */
-        unsigned char rts_hs_for_receive; /* async Protocol options */
-        unsigned char xon_xoff_hs_for_receive;
-	unsigned char xon_xoff_hs_for_transmit;
-	unsigned char dcd_hs_for_transmit;
-	unsigned char cts_hs_for_transmit;
-	unsigned char async_mode;
-	unsigned tx_bits_per_char;
-	unsigned rx_bits_per_char;
-	unsigned stop_bits;  
-	unsigned char parity;
- 	unsigned break_timer;
-        unsigned inter_char_timer;
-	unsigned rx_complete_length;
-	unsigned xon_char;
-	unsigned xoff_char;
-	unsigned char receive_only;	/*  no transmit buffering (Y/N) */
-} wanif_conf_t;
-
 #endif /* _UAPI_ROUTER_H */