Merge tag 'staging-3.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging

Pull staging driver tree merge from Greg Kroah-Hartman:
 "Here's the big staging tree merge for 3.8-rc1

  There's a lot of patches in here, the majority being the comedi
  rework/cleanup that has been ongoing and is causing a huge reduction
  in overall code size, which is amazing to watch.  We also removed some
  older drivers (telephony and rts_pstor), and added a new one (fwserial
  which also came in through the tty tree due to tty api changes, take
  that one if you get merge conflicts.)

  The iio and ipack drivers are moving out of the staging area into
  their own part of the kernel as they have been cleaned up sufficiently
  and are working well.

  Overall, again a reduction of code:
   768 files changed, 31887 insertions(+), 82166 deletions(-)

  All of this has been in the linux-next tree for a while.

  Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"

* tag 'staging-3.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (1298 commits)
  iio: imu: adis16480: remove duplicated include from adis16480.c
  iio: gyro: adis16136: remove duplicated include from adis16136.c
  iio:imu: adis16480: show_firmware() buffer too small
  iio:gyro: adis16136: divide by zero in write_frequency()
  iio: adc: Add Texas Instruments ADC081C021/027 support
  iio:ad7793: Add support for the ad7796 and ad7797
  iio:ad7793: Add support for the ad7798 and ad7799
  staging:iio: Move ad7793 driver out of staging
  staging:iio:ad7793: Implement stricter id checking
  staging:iio:ad7793: Move register definitions from header to source
  staging:iio:ad7793: Rework regulator handling
  staging:iio:ad7793: Rework platform data
  staging:iio:ad7793: Use kstrtol instead of strict_strtol
  staging:iio:ad7793: Use usleep_range instead of msleep
  staging:iio:ad7793: Fix temperature scale
  staging:iio:ad7793: Fix VDD monitor scale
  staging: gdm72xx: unlock on error in init_usb()
  staging: panel: pass correct lengths to keypad_send_key()
  staging: comedi: addi_apci_2032: fix interrupt support
  staging: comedi: addi_apci_2032: move i_APCI2032_ConfigDigitalOutput()
  ...

5 files changed, 199 insertions, 0 deletions

diff --git a/include/linux/platform_data/ad5449.h b/include/linux/platform_data/ad5449.h
new file mode 100644
index 00000000000..bd712bd4b94
--- /dev/null
+++ b/include/linux/platform_data/ad5449.h
@@ -0,0 +1,40 @@
+/*
+ * AD5415, AD5426, AD5429, AD5432, AD5439, AD5443, AD5449 Digital to Analog
+ * Converter driver.
+ *
+ * Copyright 2012 Analog Devices Inc.
+ *  Author: Lars-Peter Clausen <lars@metafoo.de>
+ *
+ * Licensed under the GPL-2.
+ */
+
+#ifndef __LINUX_PLATFORM_DATA_AD5449_H__
+#define __LINUX_PLATFORM_DATA_AD5449_H__
+
+/**
+ * enum ad5449_sdo_mode - AD5449 SDO pin configuration
+ * @AD5449_SDO_DRIVE_FULL: Drive the SDO pin with full strength.
+ * @AD5449_SDO_DRIVE_WEAK: Drive the SDO pin with not full strength.
+ * @AD5449_SDO_OPEN_DRAIN: Operate the SDO pin in open-drain mode.
+ * @AD5449_SDO_DISABLED: Disable the SDO pin, in this mode it is not possible to
+ *			read back from the device.
+ */
+enum ad5449_sdo_mode {
+	AD5449_SDO_DRIVE_FULL = 0x0,
+	AD5449_SDO_DRIVE_WEAK = 0x1,
+	AD5449_SDO_OPEN_DRAIN = 0x2,
+	AD5449_SDO_DISABLED = 0x3,
+};
+
+/**
+ * struct ad5449_platform_data - Platform data for the ad5449 DAC driver
+ * @sdo_mode: SDO pin mode
+ * @hardware_clear_to_midscale: Whether asserting the hardware CLR pin sets the
+ *			outputs to midscale (true) or to zero scale(false).
+ */
+struct ad5449_platform_data {
+	enum ad5449_sdo_mode sdo_mode;
+	bool hardware_clear_to_midscale;
+};
+
+#endif
diff --git a/include/linux/platform_data/ad7298.h b/include/linux/platform_data/ad7298.h
new file mode 100644
index 00000000000..fbf8adf1363
--- /dev/null
+++ b/include/linux/platform_data/ad7298.h
@@ -0,0 +1,20 @@
+/*
+ * AD7298 SPI ADC driver
+ *
+ * Copyright 2011 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2.
+ */
+
+#ifndef __LINUX_PLATFORM_DATA_AD7298_H__
+#define __LINUX_PLATFORM_DATA_AD7298_H__
+
+/**
+ * struct ad7298_platform_data - Platform data for the ad7298 ADC driver
+ * @ext_ref: Whether to use an external reference voltage.
+ **/
+struct ad7298_platform_data {
+	bool ext_ref;
+};
+
+#endif /* IIO_ADC_AD7298_H_ */
diff --git a/include/linux/platform_data/ad7793.h b/include/linux/platform_data/ad7793.h
new file mode 100644
index 00000000000..7ea6751aae6
--- /dev/null
+++ b/include/linux/platform_data/ad7793.h
@@ -0,0 +1,112 @@
+/*
+ * AD7792/AD7793 SPI ADC driver
+ *
+ * Copyright 2011 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2.
+ */
+#ifndef __LINUX_PLATFORM_DATA_AD7793_H__
+#define __LINUX_PLATFORM_DATA_AD7793_H__
+
+/**
+ * enum ad7793_clock_source - AD7793 clock source selection
+ * @AD7793_CLK_SRC_INT: Internal 64 kHz clock, not available at the CLK pin.
+ * @AD7793_CLK_SRC_INT_CO: Internal 64 kHz clock, available at the CLK pin.
+ * @AD7793_CLK_SRC_EXT: Use external clock.
+ * @AD7793_CLK_SRC_EXT_DIV2: Use external clock divided by 2.
+ */
+enum ad7793_clock_source {
+	AD7793_CLK_SRC_INT,
+	AD7793_CLK_SRC_INT_CO,
+	AD7793_CLK_SRC_EXT,
+	AD7793_CLK_SRC_EXT_DIV2,
+};
+
+/**
+ * enum ad7793_bias_voltage - AD7793 bias voltage selection
+ * @AD7793_BIAS_VOLTAGE_DISABLED: Bias voltage generator disabled
+ * @AD7793_BIAS_VOLTAGE_AIN1: Bias voltage connected to AIN1(-).
+ * @AD7793_BIAS_VOLTAGE_AIN2: Bias voltage connected to AIN2(-).
+ * @AD7793_BIAS_VOLTAGE_AIN3: Bias voltage connected to AIN3(-).
+ *	Only valid for AD7795/AD7796.
+ */
+enum ad7793_bias_voltage {
+	AD7793_BIAS_VOLTAGE_DISABLED,
+	AD7793_BIAS_VOLTAGE_AIN1,
+	AD7793_BIAS_VOLTAGE_AIN2,
+	AD7793_BIAS_VOLTAGE_AIN3,
+};
+
+/**
+ * enum ad7793_refsel - AD7793 reference voltage selection
+ * @AD7793_REFSEL_REFIN1: External reference applied between REFIN1(+)
+ *	and REFIN1(-).
+ * @AD7793_REFSEL_REFIN2: External reference applied between REFIN2(+) and
+ *	and REFIN1(-). Only valid for AD7795/AD7796.
+ * @AD7793_REFSEL_INTERNAL: Internal 1.17 V reference.
+ */
+enum ad7793_refsel {
+	AD7793_REFSEL_REFIN1 = 0,
+	AD7793_REFSEL_REFIN2 = 1,
+	AD7793_REFSEL_INTERNAL = 2,
+};
+
+/**
+ * enum ad7793_current_source_direction - AD7793 excitation current direction
+ * @AD7793_IEXEC1_IOUT1_IEXEC2_IOUT2: Current source IEXC1 connected to pin
+ *	IOUT1, current source IEXC2 connected to pin IOUT2.
+ * @AD7793_IEXEC1_IOUT2_IEXEC2_IOUT1: Current source IEXC2 connected to pin
+ *	IOUT1, current source IEXC1 connected to pin IOUT2.
+ * @AD7793_IEXEC1_IEXEC2_IOUT1: Both current sources connected to pin IOUT1.
+ *	Only valid when the current sources are set to 10 uA or 210 uA.
+ * @AD7793_IEXEC1_IEXEC2_IOUT2: Both current sources connected to Pin IOUT2.
+ *	Only valid when the current ources are set to 10 uA or 210 uA.
+ */
+enum ad7793_current_source_direction {
+	AD7793_IEXEC1_IOUT1_IEXEC2_IOUT2 = 0,
+	AD7793_IEXEC1_IOUT2_IEXEC2_IOUT1 = 1,
+	AD7793_IEXEC1_IEXEC2_IOUT1 = 2,
+	AD7793_IEXEC1_IEXEC2_IOUT2 = 3,
+};
+
+/**
+ * enum ad7793_excitation_current - AD7793 excitation current selection
+ * @AD7793_IX_DISABLED: Excitation current Disabled.
+ * @AD7793_IX_10uA: Enable 10 micro-ampere excitation current.
+ * @AD7793_IX_210uA: Enable 210 micro-ampere excitation current.
+ * @AD7793_IX_1mA: Enable 1 milli-Ampere excitation current.
+ */
+enum ad7793_excitation_current {
+	AD7793_IX_DISABLED = 0,
+	AD7793_IX_10uA = 1,
+	AD7793_IX_210uA = 2,
+	AD7793_IX_1mA = 3,
+};
+
+/**
+ * struct ad7793_platform_data - AD7793 platform data
+ * @clock_src: Clock source selection
+ * @burnout_current: If set to true the 100nA burnout current is enabled.
+ * @boost_enable: Enable boost for the bias voltage generator.
+ * @buffered: If set to true configure the device for buffered input mode.
+ * @unipolar: If set to true sample in unipolar mode, if set to false sample in
+ *		bipolar mode.
+ * @refsel: Reference voltage selection
+ * @bias_voltage: Bias voltage selection
+ * @exitation_current: Excitation current selection
+ * @current_source_direction: Excitation current direction selection
+ */
+struct ad7793_platform_data {
+	enum ad7793_clock_source clock_src;
+	bool burnout_current;
+	bool boost_enable;
+	bool buffered;
+	bool unipolar;
+
+	enum ad7793_refsel refsel;
+	enum ad7793_bias_voltage bias_voltage;
+	enum ad7793_excitation_current exitation_current;
+	enum ad7793_current_source_direction current_source_direction;
+};
+
+#endif /* IIO_ADC_AD7793_H_ */
diff --git a/include/linux/platform_data/ad7887.h b/include/linux/platform_data/ad7887.h
new file mode 100644
index 00000000000..1e06eac3174
--- /dev/null
+++ b/include/linux/platform_data/ad7887.h
@@ -0,0 +1,26 @@
+/*
+ * AD7887 SPI ADC driver
+ *
+ * Copyright 2010 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+#ifndef IIO_ADC_AD7887_H_
+#define IIO_ADC_AD7887_H_
+
+/**
+ * struct ad7887_platform_data - AD7887 ADC driver platform data
+ * @en_dual: Whether to use dual channel mode. If set to true AIN1 becomes the
+ *	second input channel, and Vref is internally connected to Vdd. If set to
+ *	false the device is used in single channel mode and AIN1/Vref is used as
+ *	VREF input.
+ * @use_onchip_ref: Whether to use the onchip reference. If set to true the
+ *	internal 2.5V reference is used. If set to false a external reference is
+ *	used.
+ */
+struct ad7887_platform_data {
+	bool en_dual;
+	bool use_onchip_ref;
+};
+
+#endif /* IIO_ADC_AD7887_H_ */
diff --git a/include/linux/platform_data/omap_drm.h b/include/linux/platform_data/omap_drm.h
index 3da73bdc203..f4e4a237ebd 100644
--- a/include/linux/platform_data/omap_drm.h
+++ b/include/linux/platform_data/omap_drm.h
@@ -46,6 +46,7 @@ struct omap_kms_platform_data {
 };
 
 struct omap_drm_platform_data {
+	uint32_t omaprev;
 	struct omap_kms_platform_data *kms_pdata;
 };