Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm

* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (278 commits)
  arm: remove machine_desc.io_pg_offst and .phys_io
  arm: use addruart macro to establish debug mappings
  arm: return both physical and virtual addresses from addruart
  arm/debug: consolidate addruart macros for CONFIG_DEBUG_ICEDCC
  ARM: make struct machine_desc definition coherent with its comment
  eukrea_mbimxsd-baseboard: Pass the correct GPIO to gpio_free
  cpuimx27: fix compile when ULPI is selected
  mach-pcm037_eet: fix compile errors
  Fixing ethernet driver compilation error for i.MX31 ADS board
  cpuimx51: update board support
  mx5: add cpuimx51sd module and its baseboard
  iomux-mx51: fix GPIO_1_xx 's IOMUX configuration
  imx-esdhc: update devices registration
  mx51: add resources for SD/MMC on i.MX51
  iomux-mx51: fix SD1 and SD2's iomux configuration
  clock-mx51: rename CLOCK1 to CLOCK_CCGR for better readability
  clock-mx51: factorize clk_set_parent and clk_get_rate
  eukrea_mbimxsd: add support for DVI displays
  cpuimx25 & cpuimx35: fix OTG port registration in host mode
  i.MX31 and i.MX35 : fix errate TLSbo65953 and ENGcm09472
  ...

3 files changed, 24 insertions, 4 deletions

diff --git a/include/linux/amba/bus.h b/include/linux/amba/bus.h
index b0c17401243..c6454cca044 100644
--- a/include/linux/amba/bus.h
+++ b/include/linux/amba/bus.h
@@ -20,6 +20,7 @@
 #include <linux/resource.h>
 
 #define AMBA_NR_IRQS	2
+#define AMBA_CID	0xb105f00d
 
 struct clk;
 
@@ -70,9 +71,15 @@ void amba_release_regions(struct amba_device *);
 #define amba_pclk_disable(d)	\
 	do { if (!IS_ERR((d)->pclk)) clk_disable((d)->pclk); } while (0)
 
-#define amba_config(d)	(((d)->periphid >> 24) & 0xff)
-#define amba_rev(d)	(((d)->periphid >> 20) & 0x0f)
-#define amba_manf(d)	(((d)->periphid >> 12) & 0xff)
-#define amba_part(d)	((d)->periphid & 0xfff)
+/* Some drivers don't use the struct amba_device */
+#define AMBA_CONFIG_BITS(a) (((a) >> 24) & 0xff)
+#define AMBA_REV_BITS(a) (((a) >> 20) & 0x0f)
+#define AMBA_MANF_BITS(a) (((a) >> 12) & 0xff)
+#define AMBA_PART_BITS(a) ((a) & 0xfff)
+
+#define amba_config(d)	AMBA_CONFIG_BITS((d)->periphid)
+#define amba_rev(d)	AMBA_REV_BITS((d)->periphid)
+#define amba_manf(d)	AMBA_MANF_BITS((d)->periphid)
+#define amba_part(d)	AMBA_PART_BITS((d)->periphid)
 
 #endif
diff --git a/include/linux/amba/mmci.h b/include/linux/amba/mmci.h
index ca84ce70d5d..f4ee9acc972 100644
--- a/include/linux/amba/mmci.h
+++ b/include/linux/amba/mmci.h
@@ -24,6 +24,7 @@
  * whether a card is present in the MMC slot or not
  * @gpio_wp: read this GPIO pin to see if the card is write protected
  * @gpio_cd: read this GPIO pin to detect card insertion
+ * @cd_invert: true if the gpio_cd pin value is active low
  * @capabilities: the capabilities of the block as implemented in
  * this platform, signify anything MMC_CAP_* from mmc/host.h
  */
@@ -35,6 +36,7 @@ struct mmci_platform_data {
 	unsigned int (*status)(struct device *);
 	int	gpio_wp;
 	int	gpio_cd;
+	bool	cd_invert;
 	unsigned long capabilities;
 };
 
diff --git a/include/linux/amba/serial.h b/include/linux/amba/serial.h
index e1b634b635f..6021588ba0a 100644
--- a/include/linux/amba/serial.h
+++ b/include/linux/amba/serial.h
@@ -32,7 +32,9 @@
 #define UART01x_RSR		0x04	/* Receive status register (Read). */
 #define UART01x_ECR		0x04	/* Error clear register (Write). */
 #define UART010_LCRH		0x08	/* Line control register, high byte. */
+#define ST_UART011_DMAWM	0x08    /* DMA watermark configure register. */
 #define UART010_LCRM		0x0C	/* Line control register, middle byte. */
+#define ST_UART011_TIMEOUT	0x0C    /* Timeout period register. */
 #define UART010_LCRL		0x10	/* Line control register, low byte. */
 #define UART010_CR		0x14	/* Control register. */
 #define UART01x_FR		0x18	/* Flag register (Read only). */
@@ -51,6 +53,15 @@
 #define UART011_MIS		0x40	/* Masked interrupt status. */
 #define UART011_ICR		0x44	/* Interrupt clear register. */
 #define UART011_DMACR		0x48	/* DMA control register. */
+#define ST_UART011_XFCR		0x50	/* XON/XOFF control register. */
+#define ST_UART011_XON1		0x54	/* XON1 register. */
+#define ST_UART011_XON2		0x58	/* XON2 register. */
+#define ST_UART011_XOFF1	0x5C	/* XON1 register. */
+#define ST_UART011_XOFF2	0x60	/* XON2 register. */
+#define ST_UART011_ITCR		0x80	/* Integration test control register. */
+#define ST_UART011_ITIP		0x84	/* Integration test input register. */
+#define ST_UART011_ABCR		0x100	/* Autobaud control register. */
+#define ST_UART011_ABIMSC	0x15C	/* Autobaud interrupt mask/clear register. */
 
 #define UART011_DR_OE		(1 << 11)
 #define UART011_DR_BE		(1 << 10)