summaryrefslogtreecommitdiff
path: root/include/linux/amba
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2010-10-21 16:42:32 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2010-10-21 16:42:32 -0700
commitb5153163ed580e00c67bdfecb02b2e3843817b3e (patch)
treeb8c878601f07f5df8f694435857a5f3dcfd75482 /include/linux/amba
parenta8cbf22559ceefdcdfac00701e8e6da7518b7e8e (diff)
parent6451d7783ba5ff24eb1a544eaa6665b890f30466 (diff)
downloadlinux-3.10-b5153163ed580e00c67bdfecb02b2e3843817b3e.tar.gz
linux-3.10-b5153163ed580e00c67bdfecb02b2e3843817b3e.tar.bz2
linux-3.10-b5153163ed580e00c67bdfecb02b2e3843817b3e.zip
Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm
* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (278 commits) arm: remove machine_desc.io_pg_offst and .phys_io arm: use addruart macro to establish debug mappings arm: return both physical and virtual addresses from addruart arm/debug: consolidate addruart macros for CONFIG_DEBUG_ICEDCC ARM: make struct machine_desc definition coherent with its comment eukrea_mbimxsd-baseboard: Pass the correct GPIO to gpio_free cpuimx27: fix compile when ULPI is selected mach-pcm037_eet: fix compile errors Fixing ethernet driver compilation error for i.MX31 ADS board cpuimx51: update board support mx5: add cpuimx51sd module and its baseboard iomux-mx51: fix GPIO_1_xx 's IOMUX configuration imx-esdhc: update devices registration mx51: add resources for SD/MMC on i.MX51 iomux-mx51: fix SD1 and SD2's iomux configuration clock-mx51: rename CLOCK1 to CLOCK_CCGR for better readability clock-mx51: factorize clk_set_parent and clk_get_rate eukrea_mbimxsd: add support for DVI displays cpuimx25 & cpuimx35: fix OTG port registration in host mode i.MX31 and i.MX35 : fix errate TLSbo65953 and ENGcm09472 ...
Diffstat (limited to 'include/linux/amba')
-rw-r--r--include/linux/amba/bus.h15
-rw-r--r--include/linux/amba/mmci.h2
-rw-r--r--include/linux/amba/serial.h11
3 files changed, 24 insertions, 4 deletions
diff --git a/include/linux/amba/bus.h b/include/linux/amba/bus.h
index b0c17401243..c6454cca044 100644
--- a/include/linux/amba/bus.h
+++ b/include/linux/amba/bus.h
@@ -20,6 +20,7 @@
#include <linux/resource.h>
#define AMBA_NR_IRQS 2
+#define AMBA_CID 0xb105f00d
struct clk;
@@ -70,9 +71,15 @@ void amba_release_regions(struct amba_device *);
#define amba_pclk_disable(d) \
do { if (!IS_ERR((d)->pclk)) clk_disable((d)->pclk); } while (0)
-#define amba_config(d) (((d)->periphid >> 24) & 0xff)
-#define amba_rev(d) (((d)->periphid >> 20) & 0x0f)
-#define amba_manf(d) (((d)->periphid >> 12) & 0xff)
-#define amba_part(d) ((d)->periphid & 0xfff)
+/* Some drivers don't use the struct amba_device */
+#define AMBA_CONFIG_BITS(a) (((a) >> 24) & 0xff)
+#define AMBA_REV_BITS(a) (((a) >> 20) & 0x0f)
+#define AMBA_MANF_BITS(a) (((a) >> 12) & 0xff)
+#define AMBA_PART_BITS(a) ((a) & 0xfff)
+
+#define amba_config(d) AMBA_CONFIG_BITS((d)->periphid)
+#define amba_rev(d) AMBA_REV_BITS((d)->periphid)
+#define amba_manf(d) AMBA_MANF_BITS((d)->periphid)
+#define amba_part(d) AMBA_PART_BITS((d)->periphid)
#endif
diff --git a/include/linux/amba/mmci.h b/include/linux/amba/mmci.h
index ca84ce70d5d..f4ee9acc972 100644
--- a/include/linux/amba/mmci.h
+++ b/include/linux/amba/mmci.h
@@ -24,6 +24,7 @@
* whether a card is present in the MMC slot or not
* @gpio_wp: read this GPIO pin to see if the card is write protected
* @gpio_cd: read this GPIO pin to detect card insertion
+ * @cd_invert: true if the gpio_cd pin value is active low
* @capabilities: the capabilities of the block as implemented in
* this platform, signify anything MMC_CAP_* from mmc/host.h
*/
@@ -35,6 +36,7 @@ struct mmci_platform_data {
unsigned int (*status)(struct device *);
int gpio_wp;
int gpio_cd;
+ bool cd_invert;
unsigned long capabilities;
};
diff --git a/include/linux/amba/serial.h b/include/linux/amba/serial.h
index e1b634b635f..6021588ba0a 100644
--- a/include/linux/amba/serial.h
+++ b/include/linux/amba/serial.h
@@ -32,7 +32,9 @@
#define UART01x_RSR 0x04 /* Receive status register (Read). */
#define UART01x_ECR 0x04 /* Error clear register (Write). */
#define UART010_LCRH 0x08 /* Line control register, high byte. */
+#define ST_UART011_DMAWM 0x08 /* DMA watermark configure register. */
#define UART010_LCRM 0x0C /* Line control register, middle byte. */
+#define ST_UART011_TIMEOUT 0x0C /* Timeout period register. */
#define UART010_LCRL 0x10 /* Line control register, low byte. */
#define UART010_CR 0x14 /* Control register. */
#define UART01x_FR 0x18 /* Flag register (Read only). */
@@ -51,6 +53,15 @@
#define UART011_MIS 0x40 /* Masked interrupt status. */
#define UART011_ICR 0x44 /* Interrupt clear register. */
#define UART011_DMACR 0x48 /* DMA control register. */
+#define ST_UART011_XFCR 0x50 /* XON/XOFF control register. */
+#define ST_UART011_XON1 0x54 /* XON1 register. */
+#define ST_UART011_XON2 0x58 /* XON2 register. */
+#define ST_UART011_XOFF1 0x5C /* XON1 register. */
+#define ST_UART011_XOFF2 0x60 /* XON2 register. */
+#define ST_UART011_ITCR 0x80 /* Integration test control register. */
+#define ST_UART011_ITIP 0x84 /* Integration test input register. */
+#define ST_UART011_ABCR 0x100 /* Autobaud control register. */
+#define ST_UART011_ABIMSC 0x15C /* Autobaud interrupt mask/clear register. */
#define UART011_DR_OE (1 << 11)
#define UART011_DR_BE (1 << 10)