Merge branch 'usb-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

* 'usb-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (48 commits)
  USB: Fix Corruption issue in USB ftdi driver ftdi_sio.c
  USB: option: add PID of Huawei E173s 3G modem
  OHCI: final fix for NVIDIA problems (I hope)
  USB: option: release new PID for ZTE 3G modem
  usb: Netlogic: Fix HC_LENGTH call in ehci-xls.c
  USB: storage: ene_ub6250: fix compile warnings
  USB: option: add id for 3G dongle Model VT1000 of Viettel
  USB: serial: pl2303: rm duplicate id
  USB: pch_udc: Change company name OKI SEMICONDUCTOR to LAPIS Semiconductor
  USB: pch_udc: Support new device LAPIS Semiconductor ML7831 IOH
  usb-storage: Accept 8020i-protocol commands longer than 12 bytes
  USB: quirks: adding more quirky webcams to avoid squeaky audio
  powerpc/usb: fix type cast for address of ioremap to compatible with 64-bit
  USB: at91: at91-ohci: fix set/get power
  USB: cdc-acm: Fix disconnect() vs close() race
  USB: add quirk for Logitech C600 web cam
  USB: EHCI: fix HUB TT scheduling issue with iso transfer
  USB: XHCI: resume root hubs when the controller resumes
  USB: workaround for bug in old version of GCC
  USB: ark3116 initialisation fix
  ...

42 files changed, 332 insertions, 282 deletions

diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c
index 6960715c506..e8c564a5334 100644
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -539,7 +539,6 @@ static void acm_port_down(struct acm *acm)
 {
 	int i;
 
-	mutex_lock(&open_mutex);
 	if (acm->dev) {
 		usb_autopm_get_interface(acm->control);
 		acm_set_control(acm, acm->ctrlout = 0);
@@ -551,14 +550,15 @@ static void acm_port_down(struct acm *acm)
 		acm->control->needs_remote_wakeup = 0;
 		usb_autopm_put_interface(acm->control);
 	}
-	mutex_unlock(&open_mutex);
 }
 
 static void acm_tty_hangup(struct tty_struct *tty)
 {
 	struct acm *acm = tty->driver_data;
 	tty_port_hangup(&acm->port);
+	mutex_lock(&open_mutex);
 	acm_port_down(acm);
+	mutex_unlock(&open_mutex);
 }
 
 static void acm_tty_close(struct tty_struct *tty, struct file *filp)
@@ -569,8 +569,9 @@ static void acm_tty_close(struct tty_struct *tty, struct file *filp)
 	   shutdown */
 	if (!acm)
 		return;
+
+	mutex_lock(&open_mutex);
 	if (tty_port_close_start(&acm->port, tty, filp) == 0) {
-		mutex_lock(&open_mutex);
 		if (!acm->dev) {
 			tty_port_tty_set(&acm->port, NULL);
 			acm_tty_unregister(acm);
@@ -582,6 +583,7 @@ static void acm_tty_close(struct tty_struct *tty, struct file *filp)
 	acm_port_down(acm);
 	tty_port_close_end(&acm->port, tty);
 	tty_port_tty_set(&acm->port, NULL);
+	mutex_unlock(&open_mutex);
 }
 
 static int acm_tty_write(struct tty_struct *tty,
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 96f05b29c9a..79781461eec 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -813,6 +813,12 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type)
 					USB_PORT_FEAT_C_PORT_LINK_STATE);
 		}
 
+		if ((portchange & USB_PORT_STAT_C_BH_RESET) &&
+				hub_is_superspeed(hub->hdev)) {
+			need_debounce_delay = true;
+			clear_port_feature(hub->hdev, port1,
+					USB_PORT_FEAT_C_BH_PORT_RESET);
+		}
 		/* We can forget about a "removed" device when there's a
 		 * physical disconnect or the connect status changes.
 		 */
diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c
index d6a8d8269bf..ecf12e15a7e 100644
--- a/drivers/usb/core/quirks.c
+++ b/drivers/usb/core/quirks.c
@@ -50,15 +50,42 @@ static const struct usb_device_id usb_quirk_list[] = {
 	/* Logitech Webcam B/C500 */
 	{ USB_DEVICE(0x046d, 0x0807), .driver_info = USB_QUIRK_RESET_RESUME },
 
+	/* Logitech Webcam C600 */
+	{ USB_DEVICE(0x046d, 0x0808), .driver_info = USB_QUIRK_RESET_RESUME },
+
 	/* Logitech Webcam Pro 9000 */
 	{ USB_DEVICE(0x046d, 0x0809), .driver_info = USB_QUIRK_RESET_RESUME },
 
+	/* Logitech Webcam C905 */
+	{ USB_DEVICE(0x046d, 0x080a), .driver_info = USB_QUIRK_RESET_RESUME },
+
+	/* Logitech Webcam C210 */
+	{ USB_DEVICE(0x046d, 0x0819), .driver_info = USB_QUIRK_RESET_RESUME },
+
+	/* Logitech Webcam C260 */
+	{ USB_DEVICE(0x046d, 0x081a), .driver_info = USB_QUIRK_RESET_RESUME },
+
 	/* Logitech Webcam C310 */
 	{ USB_DEVICE(0x046d, 0x081b), .driver_info = USB_QUIRK_RESET_RESUME },
 
+	/* Logitech Webcam C910 */
+	{ USB_DEVICE(0x046d, 0x0821), .driver_info = USB_QUIRK_RESET_RESUME },
+
+	/* Logitech Webcam C160 */
+	{ USB_DEVICE(0x046d, 0x0824), .driver_info = USB_QUIRK_RESET_RESUME },
+
 	/* Logitech Webcam C270 */
 	{ USB_DEVICE(0x046d, 0x0825), .driver_info = USB_QUIRK_RESET_RESUME },
 
+	/* Logitech Quickcam Pro 9000 */
+	{ USB_DEVICE(0x046d, 0x0990), .driver_info = USB_QUIRK_RESET_RESUME },
+
+	/* Logitech Quickcam E3500 */
+	{ USB_DEVICE(0x046d, 0x09a4), .driver_info = USB_QUIRK_RESET_RESUME },
+
+	/* Logitech Quickcam Vision Pro */
+	{ USB_DEVICE(0x046d, 0x09a6), .driver_info = USB_QUIRK_RESET_RESUME },
+
 	/* Logitech Harmony 700-series */
 	{ USB_DEVICE(0x046d, 0xc122), .driver_info = USB_QUIRK_DELAY_INIT },
 
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index fa824cfdd2e..25dbd8614e7 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -1284,6 +1284,7 @@ static int __devinit dwc3_gadget_init_endpoints(struct dwc3 *dwc)
 			int		ret;
 
 			dep->endpoint.maxpacket = 1024;
+			dep->endpoint.max_streams = 15;
 			dep->endpoint.ops = &dwc3_gadget_ep_ops;
 			list_add_tail(&dep->endpoint.ep_list,
 					&dwc->gadget.ep_list);
diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
index b21cd376c11..23a447373c5 100644
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -469,7 +469,7 @@ config USB_LANGWELL
 	   gadget drivers to also be dynamically linked.
 
 config USB_EG20T
-	tristate "Intel EG20T PCH/OKI SEMICONDUCTOR ML7213 IOH UDC"
+	tristate "Intel EG20T PCH/LAPIS Semiconductor IOH(ML7213/ML7831) UDC"
 	depends on PCI
 	select USB_GADGET_DUALSPEED
 	help
@@ -485,10 +485,11 @@ config USB_EG20T
 	  This driver dose not support interrupt transfer or isochronous
 	  transfer modes.
 
-	  This driver also can be used for OKI SEMICONDUCTOR's ML7213 which is
+	  This driver also can be used for LAPIS Semiconductor's ML7213 which is
 	  for IVI(In-Vehicle Infotainment) use.
-	  ML7213 is companion chip for Intel Atom E6xx series.
-	  ML7213 is completely compatible for Intel EG20T PCH.
+	  ML7831 is for general purpose use.
+	  ML7213/ML7831 is companion chip for Intel Atom E6xx series.
+	  ML7213/ML7831 is completely compatible for Intel EG20T PCH.
 
 config USB_CI13XXX_MSM
 	tristate "MIPS USB CI13xxx for MSM"
diff --git a/drivers/usb/gadget/ci13xxx_msm.c b/drivers/usb/gadget/ci13xxx_msm.c
index 4eedfe55715..1fc612914c5 100644
--- a/drivers/usb/gadget/ci13xxx_msm.c
+++ b/drivers/usb/gadget/ci13xxx_msm.c
@@ -122,3 +122,5 @@ static int __init ci13xxx_msm_init(void)
 	return platform_driver_register(&ci13xxx_msm_driver);
 }
 module_init(ci13xxx_msm_init);
+
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/usb/gadget/ci13xxx_udc.c b/drivers/usb/gadget/ci13xxx_udc.c
index 83428f56253..9a0c3979ff4 100644
--- a/drivers/usb/gadget/ci13xxx_udc.c
+++ b/drivers/usb/gadget/ci13xxx_udc.c
@@ -71,6 +71,9 @@
 /******************************************************************************
  * DEFINE
  *****************************************************************************/
+
+#define DMA_ADDR_INVALID	(~(dma_addr_t)0)
+
 /* ctrl register bank access */
 static DEFINE_SPINLOCK(udc_lock);
 
@@ -1434,7 +1437,7 @@ static int _hardware_enqueue(struct ci13xxx_ep *mEp, struct ci13xxx_req *mReq)
 		return -EALREADY;
 
 	mReq->req.status = -EALREADY;
-	if (length && !mReq->req.dma) {
+	if (length && mReq->req.dma == DMA_ADDR_INVALID) {
 		mReq->req.dma = \
 			dma_map_single(mEp->device, mReq->req.buf,
 				       length, mEp->dir ? DMA_TO_DEVICE :
@@ -1453,7 +1456,7 @@ static int _hardware_enqueue(struct ci13xxx_ep *mEp, struct ci13xxx_req *mReq)
 				dma_unmap_single(mEp->device, mReq->req.dma,
 					length, mEp->dir ? DMA_TO_DEVICE :
 					DMA_FROM_DEVICE);
-				mReq->req.dma = 0;
+				mReq->req.dma = DMA_ADDR_INVALID;
 				mReq->map     = 0;
 			}
 			return -ENOMEM;
@@ -1549,7 +1552,7 @@ static int _hardware_dequeue(struct ci13xxx_ep *mEp, struct ci13xxx_req *mReq)
 	if (mReq->map) {
 		dma_unmap_single(mEp->device, mReq->req.dma, mReq->req.length,
 				 mEp->dir ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
-		mReq->req.dma = 0;
+		mReq->req.dma = DMA_ADDR_INVALID;
 		mReq->map     = 0;
 	}
 
@@ -1610,7 +1613,6 @@ __acquires(mEp->lock)
  * @gadget: gadget
  *
  * This function returns an error code
- * Caller must hold lock
  */
 static int _gadget_stop_activity(struct usb_gadget *gadget)
 {
@@ -2189,6 +2191,7 @@ static struct usb_request *ep_alloc_request(struct usb_ep *ep, gfp_t gfp_flags)
 	mReq = kzalloc(sizeof(struct ci13xxx_req), gfp_flags);
 	if (mReq != NULL) {
 		INIT_LIST_HEAD(&mReq->queue);
+		mReq->req.dma = DMA_ADDR_INVALID;
 
 		mReq->ptr = dma_pool_alloc(mEp->td_pool, gfp_flags,
 					   &mReq->dma);
@@ -2328,7 +2331,7 @@ static int ep_dequeue(struct usb_ep *ep, struct usb_request *req)
 	if (mReq->map) {
 		dma_unmap_single(mEp->device, mReq->req.dma, mReq->req.length,
 				 mEp->dir ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
-		mReq->req.dma = 0;
+		mReq->req.dma = DMA_ADDR_INVALID;
 		mReq->map     = 0;
 	}
 	req->status = -ECONNRESET;
@@ -2500,12 +2503,12 @@ static int ci13xxx_wakeup(struct usb_gadget *_gadget)
 	spin_lock_irqsave(udc->lock, flags);
 	if (!udc->remote_wakeup) {
 		ret = -EOPNOTSUPP;
-		dbg_trace("remote wakeup feature is not enabled\n");
+		trace("remote wakeup feature is not enabled\n");
 		goto out;
 	}
 	if (!hw_cread(CAP_PORTSC, PORTSC_SUSP)) {
 		ret = -EINVAL;
-		dbg_trace("port is not suspended\n");
+		trace("port is not suspended\n");
 		goto out;
 	}
 	hw_cwrite(CAP_PORTSC, PORTSC_FPR, PORTSC_FPR);
@@ -2703,7 +2706,9 @@ static int ci13xxx_stop(struct usb_gadget_driver *driver)
 		if (udc->udc_driver->notify_event)
 			udc->udc_driver->notify_event(udc,
 			CI13XXX_CONTROLLER_STOPPED_EVENT);
+		spin_unlock_irqrestore(udc->lock, flags);
 		_gadget_stop_activity(&udc->gadget);
+		spin_lock_irqsave(udc->lock, flags);
 		pm_runtime_put(&udc->gadget.dev);
 	}
 
@@ -2850,7 +2855,7 @@ static int udc_probe(struct ci13xxx_udc_driver *driver, struct device *dev,
 	struct ci13xxx *udc;
 	int retval = 0;
 
-	trace("%p, %p, %p", dev, regs, name);
+	trace("%p, %p, %p", dev, regs, driver->name);
 
 	if (dev == NULL || regs == NULL || driver == NULL ||
 			driver->name == NULL)
diff --git a/drivers/usb/gadget/f_mass_storage.c b/drivers/usb/gadget/f_mass_storage.c
index 52583a23533..c39d58860fa 100644
--- a/drivers/usb/gadget/f_mass_storage.c
+++ b/drivers/usb/gadget/f_mass_storage.c
@@ -624,7 +624,8 @@ static int fsg_setup(struct usb_function *f,
 		if (ctrl->bRequestType !=
 		    (USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE))
 			break;
-		if (w_index != fsg->interface_number || w_value != 0)
+		if (w_index != fsg->interface_number || w_value != 0 ||
+				w_length != 0)
 			return -EDOM;
 
 		/*
@@ -639,7 +640,8 @@ static int fsg_setup(struct usb_function *f,
 		if (ctrl->bRequestType !=
 		    (USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE))
 			break;
-		if (w_index != fsg->interface_number || w_value != 0)
+		if (w_index != fsg->interface_number || w_value != 0 ||
+				w_length != 1)
 			return -EDOM;
 		VDBG(fsg, "get max LUN\n");
 		*(u8 *)req->buf = fsg->common->nluns - 1;
diff --git a/drivers/usb/gadget/f_midi.c b/drivers/usb/gadget/f_midi.c
index 67b222908cf..3797b3d6c62 100644
--- a/drivers/usb/gadget/f_midi.c
+++ b/drivers/usb/gadget/f_midi.c
@@ -95,7 +95,6 @@ static void f_midi_transmit(struct f_midi *midi, struct usb_request *req);
 
 DECLARE_UAC_AC_HEADER_DESCRIPTOR(1);
 DECLARE_USB_MIDI_OUT_JACK_DESCRIPTOR(1);
-DECLARE_USB_MIDI_OUT_JACK_DESCRIPTOR(16);
 DECLARE_USB_MS_ENDPOINT_DESCRIPTOR(16);
 
 /* B.3.1  Standard AC Interface Descriptor */
@@ -140,26 +139,6 @@ static struct usb_ms_header_descriptor ms_header_desc __initdata = {
 	/* .wTotalLength =	DYNAMIC */
 };
 
-/* B.4.3  Embedded MIDI IN Jack Descriptor */
-static struct usb_midi_in_jack_descriptor jack_in_emb_desc = {
-	.bLength =	      USB_DT_MIDI_IN_SIZE,
-	.bDescriptorType =      USB_DT_CS_INTERFACE,
-	.bDescriptorSubtype =   USB_MS_MIDI_IN_JACK,
-	.bJackType =	    USB_MS_EMBEDDED,
-	/* .bJackID =		DYNAMIC */
-};
-
-/* B.4.4  Embedded MIDI OUT Jack Descriptor */
-static struct usb_midi_out_jack_descriptor_16 jack_out_emb_desc = {
-	/* .bLength =		DYNAMIC */
-	.bDescriptorType =	USB_DT_CS_INTERFACE,
-	.bDescriptorSubtype =	USB_MS_MIDI_OUT_JACK,
-	.bJackType =		USB_MS_EMBEDDED,
-	/* .bJackID =		DYNAMIC */
-	/* .bNrInputPins =	DYNAMIC */
-	/* .pins =		DYNAMIC */
-};
-
 /* B.5.1  Standard Bulk OUT Endpoint Descriptor */
 static struct usb_endpoint_descriptor bulk_out_desc = {
 	.bLength =		USB_DT_ENDPOINT_AUDIO_SIZE,
@@ -758,9 +737,11 @@ fail:
 static int __init
 f_midi_bind(struct usb_configuration *c, struct usb_function *f)
 {
-	struct usb_descriptor_header *midi_function[(MAX_PORTS * 2) + 12];
+	struct usb_descriptor_header **midi_function;
 	struct usb_midi_in_jack_descriptor jack_in_ext_desc[MAX_PORTS];
+	struct usb_midi_in_jack_descriptor jack_in_emb_desc[MAX_PORTS];
 	struct usb_midi_out_jack_descriptor_1 jack_out_ext_desc[MAX_PORTS];
+	struct usb_midi_out_jack_descriptor_1 jack_out_emb_desc[MAX_PORTS];
 	struct usb_composite_dev *cdev = c->cdev;
 	struct f_midi *midi = func_to_midi(f);
 	int status, n, jack = 1, i = 0;
@@ -798,6 +779,14 @@ f_midi_bind(struct usb_configuration *c, struct usb_function *f)
 		goto fail;
 	midi->out_ep->driver_data = cdev;	/* claim */
 
+	/* allocate temporary function list */
+	midi_function = kcalloc((MAX_PORTS * 4) + 9, sizeof(midi_function),
+				GFP_KERNEL);
+	if (!midi_function) {
+		status = -ENOMEM;
+		goto fail;
+	}
+
 	/*
 	 * construct the function's descriptor set. As the number of
 	 * input and output MIDI ports is configurable, we have to do
@@ -811,73 +800,74 @@ f_midi_bind(struct usb_configuration *c, struct usb_function *f)
 
 	/* calculate the header's wTotalLength */
 	n = USB_DT_MS_HEADER_SIZE
-		+ (1 + midi->in_ports) * USB_DT_MIDI_IN_SIZE
-		+ (1 + midi->out_ports) * USB_DT_MIDI_OUT_SIZE(1);
+		+ (midi->in_ports + midi->out_ports) *
+			(USB_DT_MIDI_IN_SIZE + USB_DT_MIDI_OUT_SIZE(1));
 	ms_header_desc.wTotalLength = cpu_to_le16(n);
 
 	midi_function[i++] = (struct usb_descriptor_header *) &ms_header_desc;
 
-	/* we have one embedded IN jack */
-	jack_in_emb_desc.bJackID = jack++;
-	midi_function[i++] = (struct usb_descriptor_header *) &jack_in_emb_desc;
-
-	/* and a dynamic amount of external IN jacks */
-	for (n = 0; n < midi->in_ports; n++) {
-		struct usb_midi_in_jack_descriptor *ext = &jack_in_ext_desc[n];
-
-		ext->bLength =			USB_DT_MIDI_IN_SIZE;
-		ext->bDescriptorType =		USB_DT_CS_INTERFACE;
-		ext->bDescriptorSubtype =	USB_MS_MIDI_IN_JACK;
-		ext->bJackType =		USB_MS_EXTERNAL;
-		ext->bJackID =			jack++;
-		ext->iJack =			0;
-
-		midi_function[i++] = (struct usb_descriptor_header *) ext;
-	}
-
-	/* one embedded OUT jack ... */
-	jack_out_emb_desc.bLength = USB_DT_MIDI_OUT_SIZE(midi->in_ports);
-	jack_out_emb_desc.bJackID = jack++;
-	jack_out_emb_desc.bNrInputPins = midi->in_ports;
-	/* ... which referencess all external IN jacks */
+	/* configure the external IN jacks, each linked to an embedded OUT jack */
 	for (n = 0; n < midi->in_ports; n++) {
-		jack_out_emb_desc.pins[n].baSourceID = jack_in_ext_desc[n].bJackID;
-		jack_out_emb_desc.pins[n].baSourcePin =	1;
+		struct usb_midi_in_jack_descriptor *in_ext = &jack_in_ext_desc[n];
+		struct usb_midi_out_jack_descriptor_1 *out_emb = &jack_out_emb_desc[n];
+
+		in_ext->bLength			= USB_DT_MIDI_IN_SIZE;
+		in_ext->bDescriptorType		= USB_DT_CS_INTERFACE;
+		in_ext->bDescriptorSubtype	= USB_MS_MIDI_IN_JACK;
+		in_ext->bJackType		= USB_MS_EXTERNAL;
+		in_ext->bJackID			= jack++;
+		in_ext->iJack			= 0;
+		midi_function[i++] = (struct usb_descriptor_header *) in_ext;
+
+		out_emb->bLength		= USB_DT_MIDI_OUT_SIZE(1);
+		out_emb->bDescriptorType	= USB_DT_CS_INTERFACE;
+		out_emb->bDescriptorSubtype	= USB_MS_MIDI_OUT_JACK;
+		out_emb->bJackType		= USB_MS_EMBEDDED;
+		out_emb->bJackID		= jack++;
+		out_emb->bNrInputPins		= 1;
+		out_emb->pins[0].baSourcePin	= 1;
+		out_emb->pins[0].baSourceID	= in_ext->bJackID;
+		out_emb->iJack			= 0;
+		midi_function[i++] = (struct usb_descriptor_header *) out_emb;
+
+		/* link it to the endpoint */
+		ms_in_desc.baAssocJackID[n] = out_emb->bJackID;
 	}
 
-	midi_function[i++] = (struct usb_descriptor_header *) &jack_out_emb_desc;
-
-	/* and multiple external OUT jacks ... */
+	/* configure the external OUT jacks, each linked to an embedded IN jack */
 	for (n = 0; n < midi->out_ports; n++) {
-		struct usb_midi_out_jack_descriptor_1 *ext = &jack_out_ext_desc[n];
-		int m;
-
-		ext->bLength =			USB_DT_MIDI_OUT_SIZE(1);
-		ext->bDescriptorType =		USB_DT_CS_INTERFACE;
-		ext->bDescriptorSubtype =	USB_MS_MIDI_OUT_JACK;
-		ext->bJackType =		USB_MS_EXTERNAL;
-		ext->bJackID =			jack++;
-		ext->bNrInputPins =		1;
-		ext->iJack =			0;
-		/* ... which all reference the same embedded IN jack */
-		for (m = 0; m < midi->out_ports; m++) {
-			ext->pins[m].baSourceID =	jack_in_emb_desc.bJackID;
-			ext->pins[m].baSourcePin =	1;
-		}
-
-		midi_function[i++] = (struct usb_descriptor_header *) ext;
+		struct usb_midi_in_jack_descriptor *in_emb = &jack_in_emb_desc[n];
+		struct usb_midi_out_jack_descriptor_1 *out_ext = &jack_out_ext_desc[n];
+
+		in_emb->bLength			= USB_DT_MIDI_IN_SIZE;
+		in_emb->bDescriptorType		= USB_DT_CS_INTERFACE;
+		in_emb->bDescriptorSubtype	= USB_MS_MIDI_IN_JACK;
+		in_emb->bJackType		= USB_MS_EMBEDDED;
+		in_emb->bJackID			= jack++;
+		in_emb->iJack			= 0;
+		midi_function[i++] = (struct usb_descriptor_header *) in_emb;
+
+		out_ext->bLength =		USB_DT_MIDI_OUT_SIZE(1);
+		out_ext->bDescriptorType =	USB_DT_CS_INTERFACE;
+		out_ext->bDescriptorSubtype =	USB_MS_MIDI_OUT_JACK;
+		out_ext->bJackType =		USB_MS_EXTERNAL;
+		out_ext->bJackID =		jack++;
+		out_ext->bNrInputPins =		1;
+		out_ext->iJack =		0;
+		out_ext->pins[0].baSourceID =	in_emb->bJackID;
+		out_ext->pins[0].baSourcePin =	1;
+		midi_function[i++] = (struct usb_descriptor_header *) out_ext;
+
+		/* link it to the endpoint */
+		ms_out_desc.baAssocJackID[n] = in_emb->bJackID;
 	}
 
 	/* configure the endpoint descriptors ... */
 	ms_out_desc.bLength = USB_DT_MS_ENDPOINT_SIZE(midi->in_ports);
 	ms_out_desc.bNumEmbMIDIJack = midi->in_ports;
-	for (n = 0; n < midi->in_ports; n++)
-		ms_out_desc.baAssocJackID[n] = jack_in_emb_desc.bJackID;
 
 	ms_in_desc.bLength = USB_DT_MS_ENDPOINT_SIZE(midi->out_ports);
 	ms_in_desc.bNumEmbMIDIJack = midi->out_ports;
-	for (n = 0; n < midi->out_ports; n++)
-		ms_in_desc.baAssocJackID[n] = jack_out_emb_desc.bJackID;
 
 	/* ... and add them to the list */
 	midi_function[i++] = (struct usb_descriptor_header *) &bulk_out_desc;
@@ -901,6 +891,8 @@ f_midi_bind(struct usb_configuration *c, struct usb_function *f)
 		f->descriptors = usb_copy_descriptors(midi_function);
 	}
 
+	kfree(midi_function);
+
 	return 0;
 
 fail:
diff --git a/drivers/usb/gadget/file_storage.c b/drivers/usb/gadget/file_storage.c
index f7e39b0365c..11b5196284a 100644
--- a/drivers/usb/gadget/file_storage.c
+++ b/drivers/usb/gadget/file_storage.c
@@ -859,7 +859,7 @@ static int class_setup_req(struct fsg_dev *fsg,
 			if (ctrl->bRequestType != (USB_DIR_OUT |
 					USB_TYPE_CLASS | USB_RECIP_INTERFACE))
 				break;
-			if (w_index != 0 || w_value != 0) {
+			if (w_index != 0 || w_value != 0 || w_length != 0) {
 				value = -EDOM;
 				break;
 			}
@@ -875,7 +875,7 @@ static int class_setup_req(struct fsg_dev *fsg,
 			if (ctrl->bRequestType != (USB_DIR_IN |
 					USB_TYPE_CLASS | USB_RECIP_INTERFACE))
 				break;
-			if (w_index != 0 || w_value != 0) {
+			if (w_index != 0 || w_value != 0 || w_length != 1) {
 				value = -EDOM;
 				break;
 			}
diff --git a/drivers/usb/gadget/fsl_udc_core.c b/drivers/usb/gadget/fsl_udc_core.c
index d786ba31fc0..b3b3d83b7c3 100644
--- a/drivers/usb/gadget/fsl_udc_core.c
+++ b/drivers/usb/gadget/fsl_udc_core.c
@@ -2480,8 +2480,7 @@ static int __init fsl_udc_probe(struct platform_device *pdev)
 
 #ifndef CONFIG_ARCH_MXC
 	if (pdata->have_sysif_regs)
-		usb_sys_regs = (struct usb_sys_interface *)
-				((u32)dr_regs + USB_DR_SYS_OFFSET);
+		usb_sys_regs = (void *)dr_regs + USB_DR_SYS_OFFSET;
 #endif
 
 	/* Initialize USB clocks */
diff --git a/drivers/usb/gadget/inode.c b/drivers/usb/gadget/inode.c
index a392ec0d2d5..6ccae2707e5 100644
--- a/drivers/usb/gadget/inode.c
+++ b/drivers/usb/gadget/inode.c
@@ -1730,8 +1730,9 @@ static void
 gadgetfs_disconnect (struct usb_gadget *gadget)
 {
 	struct dev_data		*dev = get_gadget_data (gadget);
+	unsigned long		flags;
 
-	spin_lock (&dev->lock);
+	spin_lock_irqsave (&dev->lock, flags);
 	if (dev->state == STATE_DEV_UNCONNECTED)
 		goto exit;
 	dev->state = STATE_DEV_UNCONNECTED;
@@ -1740,7 +1741,7 @@ gadgetfs_disconnect (struct usb_gadget *gadget)
 	next_event (dev, GADGETFS_DISCONNECT);
 	ep0_readable (dev);
 exit:
-	spin_unlock (&dev->lock);
+	spin_unlock_irqrestore (&dev->lock, flags);
 }
 
 static void
diff --git a/drivers/usb/gadget/pch_udc.c b/drivers/usb/gadget/pch_udc.c
index 550d6dcdf10..5048a0c0764 100644
--- a/drivers/usb/gadget/pch_udc.c
+++ b/drivers/usb/gadget/pch_udc.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (C) 2010 OKI SEMICONDUCTOR CO., LTD.
+ * Copyright (C) 2011 LAPIS Semiconductor Co., Ltd.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -354,6 +354,7 @@ struct pch_udc_dev {
 #define PCI_DEVICE_ID_INTEL_EG20T_UDC	0x8808
 #define PCI_VENDOR_ID_ROHM		0x10DB
 #define PCI_DEVICE_ID_ML7213_IOH_UDC	0x801D
+#define PCI_DEVICE_ID_ML7831_IOH_UDC	0x8808
 
 static const char	ep0_string[] = "ep0in";
 static DEFINE_SPINLOCK(udc_stall_spinlock);	/* stall spin lock */
@@ -2970,6 +2971,11 @@ static DEFINE_PCI_DEVICE_TABLE(pch_udc_pcidev_id) = {
 		.class = (PCI_CLASS_SERIAL_USB << 8) | 0xfe,
 		.class_mask = 0xffffffff,
 	},
+	{
+		PCI_DEVICE(PCI_VENDOR_ID_ROHM, PCI_DEVICE_ID_ML7831_IOH_UDC),
+		.class = (PCI_CLASS_SERIAL_USB << 8) | 0xfe,
+		.class_mask = 0xffffffff,
+	},
 	{ 0 },
 };
 
@@ -2999,5 +3005,5 @@ static void __exit pch_udc_pci_exit(void)
 module_exit(pch_udc_pci_exit);
 
 MODULE_DESCRIPTION("Intel EG20T USB Device Controller");
-MODULE_AUTHOR("OKI SEMICONDUCTOR, <toshiharu-linux@dsn.okisemi.com>");
+MODULE_AUTHOR("LAPIS Semiconductor, <tomoya-linux@dsn.lapis-semi.com>");
 MODULE_LICENSE("GPL");
diff --git a/drivers/usb/gadget/r8a66597-udc.c b/drivers/usb/gadget/r8a66597-udc.c
index 68a826a1b86..24f84b210ce 100644
--- a/drivers/usb/gadget/r8a66597-udc.c
+++ b/drivers/usb/gadget/r8a66597-udc.c
@@ -1718,6 +1718,8 @@ static void r8a66597_fifo_flush(struct usb_ep *_ep)
 	if (list_empty(&ep->queue) && !ep->busy) {
 		pipe_stop(ep->r8a66597, ep->pipenum);
 		r8a66597_bclr(ep->r8a66597, BCLR, ep->fifoctr);
+		r8a66597_write(ep->r8a66597, ACLRM, ep->pipectr);
+		r8a66597_write(ep->r8a66597, 0, ep->pipectr);
 	}
 	spin_unlock_irqrestore(&ep->r8a66597->lock, flags);
 }
@@ -1742,7 +1744,6 @@ static int r8a66597_start(struct usb_gadget *gadget,
 		struct usb_gadget_driver *driver)
 {
 	struct r8a66597 *r8a66597 = gadget_to_r8a66597(gadget);
-	int retval;
 
 	if (!driver
 			|| driver->speed != USB_SPEED_HIGH
@@ -1752,16 +1753,7 @@ static int r8a66597_start(struct usb_gadget *gadget,
 		return -ENODEV;
 
 	/* hook up the driver */
-	driver->driver.bus = NULL;
 	r8a66597->driver = driver;
-	r8a66597->gadget.dev.driver = &driver->driver;
-
-	retval = device_add(&r8a66597->gadget.dev);
-	if (retval) {
-		dev_err(r8a66597_to_dev(r8a66597), "device_add error (%d)\n",
-			retval);
-		goto error;
-	}
 
 	init_controller(r8a66597);
 	r8a66597_bset(r8a66597, VBSE, INTENB0);
@@ -1775,12 +1767,6 @@ static int r8a66597_start(struct usb_gadget *gadget,
 	}
 
 	return 0;
-
-error:
-	r8a66597->driver = NULL;
-	r8a66597->gadget.dev.driver = NULL;
-
-	return retval;
 }
 
 static int r8a66597_stop(struct usb_gadget *gadget,
@@ -1794,7 +1780,6 @@ static int r8a66597_stop(struct usb_gadget *gadget,
 	disable_controller(r8a66597);
 	spin_unlock_irqrestore(&r8a66597->lock, flags);
 
-	device_del(&r8a66597->gadget.dev);
 	r8a66597->driver = NULL;
 	return 0;
 }
@@ -1845,6 +1830,7 @@ static int __exit r8a66597_remove(struct platform_device *pdev)
 		clk_put(r8a66597->clk);
 	}
 #endif
+	device_unregister(&r8a66597->gadget.dev);
 	kfree(r8a66597);
 	return 0;
 }
@@ -1924,13 +1910,17 @@ static int __init r8a66597_probe(struct platform_device *pdev)
 	r8a66597->irq_sense_low = irq_trigger == IRQF_TRIGGER_LOW;
 
 	r8a66597->gadget.ops = &r8a66597_gadget_ops;
-	device_initialize(&r8a66597->gadget.dev);
 	dev_set_name(&r8a66597->gadget.dev, "gadget");
 	r8a66597->gadget.is_dualspeed = 1;
 	r8a66597->gadget.dev.parent = &pdev->dev;
 	r8a66597->gadget.dev.dma_mask = pdev->dev.dma_mask;
 	r8a66597->gadget.dev.release = pdev->dev.release;
 	r8a66597->gadget.name = udc_name;
+	ret = device_register(&r8a66597->gadget.dev);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "device_register failed\n");
+		goto clean_up;
+	}
 
 	init_timer(&r8a66597->timer);
 	r8a66597->timer.function = r8a66597_timer;
@@ -1945,7 +1935,7 @@ static int __init r8a66597_probe(struct platform_device *pdev)
 			dev_err(&pdev->dev, "cannot get clock \"%s\"\n",
 				clk_name);
 			ret = PTR_ERR(r8a66597->clk);
-			goto clean_up;
+			goto clean_up_dev;
 		}
 		clk_enable(r8a66597->clk);
 	}
@@ -2014,7 +2004,9 @@ clean_up2:
 		clk_disable(r8a66597->clk);
 		clk_put(r8a66597->clk);
 	}
+clean_up_dev:
 #endif
+	device_unregister(&r8a66597->gadget.dev);
 clean_up:
 	if (r8a66597) {
 		if (r8a66597->sudmac_reg)
diff --git a/drivers/usb/gadget/udc-core.c b/drivers/usb/gadget/udc-core.c
index 022baeca7c9..6939e17f458 100644
--- a/drivers/usb/gadget/udc-core.c
+++ b/drivers/usb/gadget/udc-core.c
@@ -210,10 +210,10 @@ static void usb_gadget_remove_driver(struct usb_udc *udc)
 	kobject_uevent(&udc->dev.kobj, KOBJ_CHANGE);
 
 	if (udc_is_newstyle(udc)) {
-		usb_gadget_disconnect(udc->gadget);
+		udc->driver->disconnect(udc->gadget);
 		udc->driver->unbind(udc->gadget);
 		usb_gadget_udc_stop(udc->gadget, udc->driver);
-
+		usb_gadget_disconnect(udc->gadget);
 	} else {
 		usb_gadget_stop(udc->gadget, udc->driver);
 	}
@@ -344,7 +344,7 @@ EXPORT_SYMBOL_GPL(usb_gadget_unregister_driver);
 static ssize_t usb_udc_srp_store(struct device *dev,
 		struct device_attribute *attr, const char *buf, size_t n)
 {
-	struct usb_udc		*udc = dev_get_drvdata(dev);
+	struct usb_udc		*udc = container_of(dev, struct usb_udc, dev);
 
 	if (sysfs_streq(buf, "1"))
 		usb_gadget_wakeup(udc->gadget);
@@ -378,7 +378,7 @@ static ssize_t usb_udc_speed_show(struct device *dev,
 	return snprintf(buf, PAGE_SIZE, "%s\n",
 			usb_speed_string(udc->gadget->speed));
 }
-static DEVICE_ATTR(speed, S_IRUSR, usb_udc_speed_show, NULL);
+static DEVICE_ATTR(speed, S_IRUGO, usb_udc_speed_show, NULL);
 
 #define USB_UDC_ATTR(name)					\
 ssize_t usb_udc_##name##_show(struct device *dev,		\
@@ -389,7 +389,7 @@ ssize_t usb_udc_##name##_show(struct device *dev,		\
 								\
 	return snprintf(buf, PAGE_SIZE, "%d\n", gadget->name);	\
 }								\
-static DEVICE_ATTR(name, S_IRUSR, usb_udc_##name##_show, NULL)
+static DEVICE_ATTR(name, S_IRUGO, usb_udc_##name##_show, NULL)
 
 static USB_UDC_ATTR(is_dualspeed);
 static USB_UDC_ATTR(is_otg);
diff --git a/drivers/usb/host/ehci-sched.c b/drivers/usb/host/ehci-sched.c
index 2e829fae648..56a32033adb 100644
--- a/drivers/usb/host/ehci-sched.c
+++ b/drivers/usb/host/ehci-sched.c
@@ -1479,10 +1479,15 @@ iso_stream_schedule (
 
 		/* NOTE:  assumes URB_ISO_ASAP, to limit complexity/bugs */
 
-		/* find a uframe slot with enough bandwidth */
-		next = start + period;
-		for (; start < next; start++) {
-
+		/* find a uframe slot with enough bandwidth.
+		 * Early uframes are more precious because full-speed
+		 * iso IN transfers can't use late uframes,
+		 * and therefore they should be allocated last.
+		 */
+		next = start;
+		start += period;
+		do {
+			start--;
 			/* check schedule: enough space? */
 			if (stream->highspeed) {
 				if (itd_slot_ok(ehci, mod, start,
@@ -1495,7 +1500,7 @@ iso_stream_schedule (
 						start, sched, period))
 					break;
 			}
-		}
+		} while (start > next);
 
 		/* no room in the schedule */
 		if (start == next) {
diff --git a/drivers/usb/host/ehci-xls.c b/drivers/usb/host/ehci-xls.c
index fe74bd67601..b4fb511d24b 100644
--- a/drivers/usb/host/ehci-xls.c
+++ b/drivers/usb/host/ehci-xls.c
@@ -19,7 +19,7 @@ static int ehci_xls_setup(struct usb_hcd *hcd)
 
 	ehci->caps = hcd->regs;
 	ehci->regs = hcd->regs +
-		HC_LENGTH(ehci_readl(ehci, &ehci->caps->hc_capbase));
+		HC_LENGTH(ehci, ehci_readl(ehci, &ehci->caps->hc_capbase));
 	dbg_hcs_params(ehci, "reset");
 	dbg_hcc_params(ehci, "reset");
 
diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c
index ba3a46b78b7..95a9fec38e8 100644
--- a/drivers/usb/host/ohci-at91.c
+++ b/drivers/usb/host/ohci-at91.c
@@ -223,6 +223,9 @@ static void ohci_at91_usb_set_power(struct at91_usbh_data *pdata, int port, int
 	if (port < 0 || port >= 2)
 		return;
 
+	if (pdata->vbus_pin[port] <= 0)
+		return;
+
 	gpio_set_value(pdata->vbus_pin[port], !pdata->vbus_pin_inverted ^ enable);
 }
 
@@ -231,6 +234,9 @@ static int ohci_at91_usb_get_power(struct at91_usbh_data *pdata, int port)
 	if (port < 0 || port >= 2)
 		return -EINVAL;
 
+	if (pdata->vbus_pin[port] <= 0)
+		return -EINVAL;
+
 	return gpio_get_value(pdata->vbus_pin[port]) ^ !pdata->vbus_pin_inverted;
 }
 
diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c
index 34efd479e06..b2639191549 100644
--- a/drivers/usb/host/ohci-hcd.c
+++ b/drivers/usb/host/ohci-hcd.c
@@ -389,17 +389,14 @@ ohci_shutdown (struct usb_hcd *hcd)
 	struct ohci_hcd *ohci;
 
 	ohci = hcd_to_ohci (hcd);
-	ohci_writel (ohci, OHCI_INTR_MIE, &ohci->regs->intrdisable);
-	ohci->hc_control = ohci_readl(ohci, &ohci->regs->control);
+	ohci_writel(ohci, (u32) ~0, &ohci->regs->intrdisable);
 
-	/* If the SHUTDOWN quirk is set, don't put the controller in RESET */
-	ohci->hc_control &= (ohci->flags & OHCI_QUIRK_SHUTDOWN ?
-			OHCI_CTRL_RWC | OHCI_CTRL_HCFS :
-			OHCI_CTRL_RWC);
-	ohci_writel(ohci, ohci->hc_control, &ohci->regs->control);
+	/* Software reset, after which the controller goes into SUSPEND */
+	ohci_writel(ohci, OHCI_HCR, &ohci->regs->cmdstatus);
+	ohci_readl(ohci, &ohci->regs->cmdstatus);	/* flush the writes */
+	udelay(10);
 
-	/* flush the writes */
-	(void) ohci_readl (ohci, &ohci->regs->control);
+	ohci_writel(ohci, ohci->fminterval, &ohci->regs->fminterval);
 }
 
 static int check_ed(struct ohci_hcd *ohci, struct ed *ed)
diff --git a/drivers/usb/host/ohci-pci.c b/drivers/usb/host/ohci-pci.c
index ad8166c681e..bc01b064585 100644
--- a/drivers/usb/host/ohci-pci.c
+++ b/drivers/usb/host/ohci-pci.c
@@ -175,28 +175,6 @@ static int ohci_quirk_amd700(struct usb_hcd *hcd)
 	return 0;
 }
 
-/* nVidia controllers continue to drive Reset signalling on the bus
- * even after system shutdown, wasting power.  This flag tells the
- * shutdown routine to leave the controller OPERATIONAL instead of RESET.
- */
-static int ohci_quirk_nvidia_shutdown(struct usb_hcd *hcd)
-{
-	struct pci_dev *pdev = to_pci_dev(hcd->self.controller);
-	struct ohci_hcd	*ohci = hcd_to_ohci(hcd);
-
-	/* Evidently nVidia fixed their later hardware; this is a guess at
-	 * the changeover point.
-	 */
-#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_USB		0x026d
-
-	if (pdev->device < PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_USB) {
-		ohci->flags |= OHCI_QUIRK_SHUTDOWN;
-		ohci_dbg(ohci, "enabled nVidia shutdown quirk\n");
-	}
-
-	return 0;
-}
-
 static void sb800_prefetch(struct ohci_hcd *ohci, int on)
 {
 	struct pci_dev *pdev;
@@ -260,10 +238,6 @@ static const struct pci_device_id ohci_pci_quirks[] = {
 		PCI_DEVICE(PCI_VENDOR_ID_ATI, 0x4399),
 		.driver_data = (unsigned long)ohci_quirk_amd700,
 	},
-	{
-		PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_ANY_ID),
-		.driver_data = (unsigned long) ohci_quirk_nvidia_shutdown,
-	},
 
 	/* FIXME for some of the early AMD 760 southbridges, OHCI
 	 * won't work at all.  blacklist them.
diff --git a/drivers/usb/host/ohci.h b/drivers/usb/host/ohci.h
index 35e5fd640ce..0795b934d00 100644
--- a/drivers/usb/host/ohci.h
+++ b/drivers/usb/host/ohci.h
@@ -403,7 +403,6 @@ struct ohci_hcd {
 #define	OHCI_QUIRK_HUB_POWER	0x100			/* distrust firmware power/oc setup */
 #define	OHCI_QUIRK_AMD_PLL	0x200			/* AMD PLL quirk*/
 #define	OHCI_QUIRK_AMD_PREFETCH	0x400			/* pre-fetch for ISO transfer */
-#define	OHCI_QUIRK_SHUTDOWN	0x800			/* nVidia power bug */
 	// there are also chip quirks/bugs in init logic
 
 	struct work_struct	nec_work;	/* Worker for NEC quirk */
diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c
index 27a3dec32fa..caf87428ca4 100644
--- a/drivers/usb/host/pci-quirks.c
+++ b/drivers/usb/host/pci-quirks.c
@@ -37,6 +37,7 @@
 #define OHCI_INTRENABLE		0x10
 #define OHCI_INTRDISABLE	0x14
 #define OHCI_FMINTERVAL		0x34
+#define OHCI_HCFS		(3 << 6)	/* hc functional state */
 #define OHCI_HCR		(1 << 0)	/* host controller reset */
 #define OHCI_OCR		(1 << 3)	/* ownership change request */
 #define OHCI_CTRL_RWC		(1 << 9)	/* remote wakeup connected */
@@ -466,6 +467,8 @@ static void __devinit quirk_usb_handoff_ohci(struct pci_dev *pdev)
 {
 	void __iomem *base;
 	u32 control;
+	u32 fminterval;
+	int cnt;
 
 	if (!mmio_resource_enabled(pdev, 0))
 		return;
@@ -498,41 +501,32 @@ static void __devinit quirk_usb_handoff_ohci(struct pci_dev *pdev)
 	}
 #endif
 
-	/* reset controller, preserving RWC (and possibly IR) */
-	writel(control & OHCI_CTRL_MASK, base + OHCI_CONTROL);
-	readl(base + OHCI_CONTROL);
+	/* disable interrupts */
+	writel((u32) ~0, base + OHCI_INTRDISABLE);
 
-	/* Some NVIDIA controllers stop working if kept in RESET for too long */
-	if (pdev->vendor == PCI_VENDOR_ID_NVIDIA) {
-		u32 fminterval;
-		int cnt;
+	/* Reset the USB bus, if the controller isn't already in RESET */
+	if (control & OHCI_HCFS) {
+		/* Go into RESET, preserving RWC (and possibly IR) */
+		writel(control & OHCI_CTRL_MASK, base + OHCI_CONTROL);
+		readl(base + OHCI_CONTROL);
 
-		/* drive reset for at least 50 ms (7.1.7.5) */
+		/* drive bus reset for at least 50 ms (7.1.7.5) */
 		msleep(50);
+	}
 
-		/* software reset of the controller, preserving HcFmInterval */
-		fminterval = readl(base + OHCI_FMINTERVAL);
-		writel(OHCI_HCR, base + OHCI_CMDSTATUS);
+	/* software reset of the controller, preserving HcFmInterval */
+	fminterval = readl(base + OHCI_FMINTERVAL);
+	writel(OHCI_HCR, base + OHCI_CMDSTATUS);
 
-		/* reset requires max 10 us delay */
-		for (cnt = 30; cnt > 0; --cnt) {	/* ... allow extra time */
-			if ((readl(base + OHCI_CMDSTATUS) & OHCI_HCR) == 0)
-				break;
-			udelay(1);
-		}
-		writel(fminterval, base + OHCI_FMINTERVAL);
-
-		/* Now we're in the SUSPEND state with all devices reset
-		 * and wakeups and interrupts disabled
-		 */
+	/* reset requires max 10 us delay */
+	for (cnt = 30; cnt > 0; --cnt) {	/* ... allow extra time */
+		if ((readl(base + OHCI_CMDSTATUS) & OHCI_HCR) == 0)
+			break;
+		udelay(1);
 	}
+	writel(fminterval, base + OHCI_FMINTERVAL);
 
-	/*
-	 * disable interrupts
-	 */
-	writel(~(u32)0, base + OHCI_INTRDISABLE);
-	writel(~(u32)0, base + OHCI_INTRSTATUS);
-
+	/* Now the controller is safely in SUSPEND and nothing can wake it up */
 	iounmap(base);
 }
 
@@ -627,7 +621,7 @@ static void __devinit quirk_usb_disable_ehci(struct pci_dev *pdev)
 	void __iomem *base, *op_reg_base;
 	u32	hcc_params, cap, val;
 	u8	offset, cap_length;
-	int	wait_time, delta, count = 256/4;
+	int	wait_time, count = 256/4;
 
 	if (!mmio_resource_enabled(pdev, 0))
 		return;
@@ -673,11 +667,10 @@ static void __devinit quirk_usb_disable_ehci(struct pci_dev *pdev)
 		writel(val, op_reg_base + EHCI_USBCMD);
 
 		wait_time = 2000;
-		delta = 100;
 		do {
 			writel(0x3f, op_reg_base + EHCI_USBSTS);
-			udelay(delta);
-			wait_time -= delta;
+			udelay(100);
+			wait_time -= 100;
 			val = readl(op_reg_base + EHCI_USBSTS);
 			if ((val == ~(u32)0) || (val & EHCI_USBSTS_HALTED)) {
 				break;
diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
index 42a22b8e692..0e4b25fa3bc 100644
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -982,7 +982,6 @@ int xhci_setup_addressable_virt_dev(struct xhci_hcd *xhci, struct usb_device *ud
 	struct xhci_virt_device *dev;
 	struct xhci_ep_ctx	*ep0_ctx;
 	struct xhci_slot_ctx    *slot_ctx;
-	struct xhci_input_control_ctx *ctrl_ctx;
 	u32			port_num;
 	struct usb_device *top_dev;
 
@@ -994,12 +993,8 @@ int xhci_setup_addressable_virt_dev(struct xhci_hcd *xhci, struct usb_device *ud
 		return -EINVAL;
 	}
 	ep0_ctx = xhci_get_ep_ctx(xhci, dev->in_ctx, 0);
-	ctrl_ctx = xhci_get_input_control_ctx(xhci, dev->in_ctx);
 	slot_ctx = xhci_get_slot_ctx(xhci, dev->in_ctx);
 
-	/* 2) New slot context and endpoint 0 context are valid*/
-	ctrl_ctx->add_flags = cpu_to_le32(SLOT_FLAG | EP0_FLAG);
-
 	/* 3) Only the control endpoint is valid - one endpoint context */
 	slot_ctx->dev_info |= cpu_to_le32(LAST_CTX(1) | udev->route);
 	switch (udev->speed) {
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index 940321b3ec6..9f1d4b15d81 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -816,23 +816,24 @@ void xhci_stop_endpoint_command_watchdog(unsigned long arg)
 	struct xhci_ring *ring;
 	struct xhci_td *cur_td;
 	int ret, i, j;
+	unsigned long flags;
 
 	ep = (struct xhci_virt_ep *) arg;
 	xhci = ep->xhci;
 
-	spin_lock(&xhci->lock);
+	spin_lock_irqsave(&xhci->lock, flags);
 
 	ep->stop_cmds_pending--;
 	if (xhci->xhc_state & XHCI_STATE_DYING) {
 		xhci_dbg(xhci, "Stop EP timer ran, but another timer marked "
 				"xHCI as DYING, exiting.\n");
-		spin_unlock(&xhci->lock);
+		spin_unlock_irqrestore(&xhci->lock, flags);
 		return;
 	}
 	if (!(ep->stop_cmds_pending == 0 && (ep->ep_state & EP_HALT_PENDING))) {
 		xhci_dbg(xhci, "Stop EP timer ran, but no command pending, "
 				"exiting.\n");
-		spin_unlock(&xhci->lock);
+		spin_unlock_irqrestore(&xhci->lock, flags);
 		return;
 	}
 
@@ -844,11 +845,11 @@ void xhci_stop_endpoint_command_watchdog(unsigned long arg)
 	xhci->xhc_state |= XHCI_STATE_DYING;
 	/* Disable interrupts from the host controller and start halting it */
 	xhci_quiesce(xhci);
-	spin_unlock(&xhci->lock);
+	spin_unlock_irqrestore(&xhci->lock, flags);
 
 	ret = xhci_halt(xhci);
 
-	spin_lock(&xhci->lock);
+	spin_lock_irqsave(&xhci->lock, flags);
 	if (ret < 0) {
 		/* This is bad; the host is not responding to commands and it's
 		 * not allowing itself to be halted.  At least interrupts are
@@ -896,7 +897,7 @@ void xhci_stop_endpoint_command_watchdog(unsigned long arg)
 			}
 		}
 	}
-	spin_unlock(&xhci->lock);
+	spin_unlock_irqrestore(&xhci->lock, flags);
 	xhci_dbg(xhci, "Calling usb_hc_died()\n");
 	usb_hc_died(xhci_to_hcd(xhci)->primary_hcd);
 	xhci_dbg(xhci, "xHCI host controller is dead.\n");
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 1ff95a0df57..aa94c019579 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -799,7 +799,7 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated)
 	u32			command, temp = 0;
 	struct usb_hcd		*hcd = xhci_to_hcd(xhci);
 	struct usb_hcd		*secondary_hcd;
-	int			retval;
+	int			retval = 0;
 
 	/* Wait a bit if either of the roothubs need to settle from the
 	 * transition into bus suspend.
@@ -809,6 +809,9 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated)
 				xhci->bus_state[1].next_statechange))
 		msleep(100);
 
+	set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
+	set_bit(HCD_FLAG_HW_ACCESSIBLE, &xhci->shared_hcd->flags);
+
 	spin_lock_irq(&xhci->lock);
 	if (xhci->quirks & XHCI_RESET_ON_RESUME)
 		hibernated = true;
@@ -878,20 +881,13 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated)
 			return retval;
 		xhci_dbg(xhci, "Start the primary HCD\n");
 		retval = xhci_run(hcd->primary_hcd);
-		if (retval)
-			goto failed_restart;
-
-		xhci_dbg(xhci, "Start the secondary HCD\n");
-		retval = xhci_run(secondary_hcd);
 		if (!retval) {
-			set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
-			set_bit(HCD_FLAG_HW_ACCESSIBLE,
-					&xhci->shared_hcd->flags);
+			xhci_dbg(xhci, "Start the secondary HCD\n");
+			retval = xhci_run(secondary_hcd);
 		}
-failed_restart:
 		hcd->state = HC_STATE_SUSPENDED;
 		xhci->shared_hcd->state = HC_STATE_SUSPENDED;
-		return retval;
+		goto done;
 	}
 
 	/* step 4: set Run/Stop bit */
@@ -910,11 +906,14 @@ failed_restart:
 	 * Running endpoints by ringing their doorbells
 	 */
 
-	set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
-	set_bit(HCD_FLAG_HW_ACCESSIBLE, &xhci->shared_hcd->flags);
-
 	spin_unlock_irq(&xhci->lock);
-	return 0;
+
+ done:
+	if (retval == 0) {
+		usb_hcd_resume_root_hub(hcd);
+		usb_hcd_resume_root_hub(xhci->shared_hcd);
+	}
+	return retval;
 }
 #endif	/* CONFIG_PM */
 
@@ -3504,6 +3503,10 @@ int xhci_address_device(struct usb_hcd *hcd, struct usb_device *udev)
 	/* Otherwise, update the control endpoint ring enqueue pointer. */
 	else
 		xhci_copy_ep0_dequeue_into_input_ctx(xhci, udev);
+	ctrl_ctx = xhci_get_input_control_ctx(xhci, virt_dev->in_ctx);
+	ctrl_ctx->add_flags = cpu_to_le32(SLOT_FLAG | EP0_FLAG);
+	ctrl_ctx->drop_flags = 0;
+
 	xhci_dbg(xhci, "Slot ID %d Input Context:\n", udev->slot_id);
 	xhci_dbg_ctx(xhci, virt_dev->in_ctx, 2);
 
@@ -3585,7 +3588,6 @@ int xhci_address_device(struct usb_hcd *hcd, struct usb_device *udev)
 	virt_dev->address = (le32_to_cpu(slot_ctx->dev_state) & DEV_ADDR_MASK)
 		+ 1;
 	/* Zero the input context control for later use */
-	ctrl_ctx = xhci_get_input_control_ctx(xhci, virt_dev->in_ctx);
 	ctrl_ctx->add_flags = 0;
 	ctrl_ctx->drop_flags = 0;
 
diff --git a/drivers/usb/musb/Kconfig b/drivers/usb/musb/Kconfig
index fc34b8b1191..07a03460a59 100644
--- a/drivers/usb/musb/Kconfig
+++ b/drivers/usb/musb/Kconfig
@@ -11,6 +11,7 @@ config USB_MUSB_HDRC
 	select TWL4030_USB if MACH_OMAP_3430SDP
 	select TWL6030_USB if MACH_OMAP_4430SDP || MACH_OMAP4_PANDA
 	select USB_OTG_UTILS
+	select USB_GADGET_DUALSPEED
 	tristate 'Inventra Highspeed Dual Role Controller (TI, ADI, ...)'
 	help
 	  Say Y here if your system has a dual role high speed USB
@@ -60,7 +61,7 @@ config USB_MUSB_BLACKFIN
 
 config USB_MUSB_UX500
 	tristate "U8500 and U5500"
-	depends on (ARCH_U8500 && AB8500_USB) || (ARCH_U5500)
+	depends on (ARCH_U8500 && AB8500_USB)
 
 endchoice
 
diff --git a/drivers/usb/musb/am35x.c b/drivers/usb/musb/am35x.c
index 08f1d0b662a..e233d2b7d33 100644
--- a/drivers/usb/musb/am35x.c
+++ b/drivers/usb/musb/am35x.c
@@ -27,6 +27,7 @@
  */
 
 #include <linux/init.h>
+#include <linux/module.h>
 #include <linux/clk.h>
 #include <linux/io.h>
 #include <linux/platform_device.h>
diff --git a/drivers/usb/musb/da8xx.c b/drivers/usb/musb/da8xx.c
index 4da7492ddbd..2613bfdb09b 100644
--- a/drivers/usb/musb/da8xx.c
+++ b/drivers/usb/musb/da8xx.c
@@ -27,6 +27,7 @@
  */
 
 #include <linux/init.h>
+#include <linux/module.h>
 #include <linux/clk.h>
 #include <linux/io.h>
 #include <linux/platform_device.h>
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index 20a28731c33..c1fa12ec7a9 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -1477,8 +1477,7 @@ static int __init musb_core_init(u16 musb_type, struct musb *musb)
 /*-------------------------------------------------------------------------*/
 
 #if defined(CONFIG_SOC_OMAP2430) || defined(CONFIG_SOC_OMAP3430) || \
-	defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_ARCH_U8500) || \
-	defined(CONFIG_ARCH_U5500)
+	defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_ARCH_U8500)
 
 static irqreturn_t generic_interrupt(int irq, void *__hci)
 {
diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c
index ae4a20acef6..d51043acfe1 100644
--- a/drivers/usb/musb/musb_gadget.c
+++ b/drivers/usb/musb/musb_gadget.c
@@ -1999,10 +1999,6 @@ static void stop_activity(struct musb *musb, struct usb_gadget_driver *driver)
 					nuke(&hw_ep->ep_out, -ESHUTDOWN);
 			}
 		}
-
-		spin_unlock(&musb->lock);
-		driver->disconnect(&musb->g);
-		spin_lock(&musb->lock);
 	}
 }
 
diff --git a/drivers/usb/renesas_usbhs/common.c b/drivers/usb/renesas_usbhs/common.c
index d2e2efaba65..08c679c0dde 100644
--- a/drivers/usb/renesas_usbhs/common.c
+++ b/drivers/usb/renesas_usbhs/common.c
@@ -405,7 +405,7 @@ int usbhsc_drvcllbck_notify_hotplug(struct platform_device *pdev)
 /*
  *		platform functions
  */
-static int __devinit usbhs_probe(struct platform_device *pdev)
+static int usbhs_probe(struct platform_device *pdev)
 {
 	struct renesas_usbhs_platform_info *info = pdev->dev.platform_data;
 	struct renesas_usbhs_driver_callback *dfunc;
diff --git a/drivers/usb/renesas_usbhs/fifo.c b/drivers/usb/renesas_usbhs/fifo.c
index 8da685e796d..ffdf5d15085 100644
--- a/drivers/usb/renesas_usbhs/fifo.c
+++ b/drivers/usb/renesas_usbhs/fifo.c
@@ -820,7 +820,7 @@ static int usbhsf_dma_prepare_push(struct usbhs_pkt *pkt, int *is_done)
 	if (len % 4) /* 32bit alignment */
 		goto usbhsf_pio_prepare_push;
 
-	if ((*(u32 *) pkt->buf + pkt->actual) & 0x7) /* 8byte alignment */
+	if ((uintptr_t)(pkt->buf + pkt->actual) & 0x7) /* 8byte alignment */
 		goto usbhsf_pio_prepare_push;
 
 	/* get enable DMA fifo */
@@ -897,7 +897,7 @@ static int usbhsf_dma_try_pop(struct usbhs_pkt *pkt, int *is_done)
 	if (!fifo)
 		goto usbhsf_pio_prepare_pop;
 
-	if ((*(u32 *) pkt->buf + pkt->actual) & 0x7) /* 8byte alignment */
+	if ((uintptr_t)(pkt->buf + pkt->actual) & 0x7) /* 8byte alignment */
 		goto usbhsf_pio_prepare_pop;
 
 	ret = usbhsf_fifo_select(pipe, fifo, 0);
diff --git a/drivers/usb/renesas_usbhs/mod.h b/drivers/usb/renesas_usbhs/mod.h
index 8ae3733031c..6c6875533f0 100644
--- a/drivers/usb/renesas_usbhs/mod.h
+++ b/drivers/usb/renesas_usbhs/mod.h
@@ -143,8 +143,8 @@ void usbhs_irq_callback_update(struct usbhs_priv *priv, struct usbhs_mod *mod);
  */
 #if	defined(CONFIG_USB_RENESAS_USBHS_HCD) || \
 	defined(CONFIG_USB_RENESAS_USBHS_HCD_MODULE)
-extern int __devinit usbhs_mod_host_probe(struct usbhs_priv *priv);
-extern int __devexit usbhs_mod_host_remove(struct usbhs_priv *priv);
+extern int usbhs_mod_host_probe(struct usbhs_priv *priv);
+extern int usbhs_mod_host_remove(struct usbhs_priv *priv);
 #else
 static inline int usbhs_mod_host_probe(struct usbhs_priv *priv)
 {
@@ -157,8 +157,8 @@ static inline void usbhs_mod_host_remove(struct usbhs_priv *priv)
 
 #if	defined(CONFIG_USB_RENESAS_USBHS_UDC) || \
 	defined(CONFIG_USB_RENESAS_USBHS_UDC_MODULE)
-extern int __devinit usbhs_mod_gadget_probe(struct usbhs_priv *priv);
-extern void __devexit usbhs_mod_gadget_remove(struct usbhs_priv *priv);
+extern int usbhs_mod_gadget_probe(struct usbhs_priv *priv);
+extern void usbhs_mod_gadget_remove(struct usbhs_priv *priv);
 #else
 static inline int usbhs_mod_gadget_probe(struct usbhs_priv *priv)
 {
diff --git a/drivers/usb/renesas_usbhs/mod_gadget.c b/drivers/usb/renesas_usbhs/mod_gadget.c
index 4cc7ee0babc..d9717e0bc1f 100644
--- a/drivers/usb/renesas_usbhs/mod_gadget.c
+++ b/drivers/usb/renesas_usbhs/mod_gadget.c
@@ -830,7 +830,7 @@ static int usbhsg_stop(struct usbhs_priv *priv)
 	return usbhsg_try_stop(priv, USBHSG_STATUS_STARTED);
 }
 
-int __devinit usbhs_mod_gadget_probe(struct usbhs_priv *priv)
+int usbhs_mod_gadget_probe(struct usbhs_priv *priv)
 {
 	struct usbhsg_gpriv *gpriv;
 	struct usbhsg_uep *uep;
@@ -927,7 +927,7 @@ usbhs_mod_gadget_probe_err_gpriv:
 	return ret;
 }
 
-void __devexit usbhs_mod_gadget_remove(struct usbhs_priv *priv)
+void usbhs_mod_gadget_remove(struct usbhs_priv *priv)
 {
 	struct usbhsg_gpriv *gpriv = usbhsg_priv_to_gpriv(priv);
 
diff --git a/drivers/usb/renesas_usbhs/mod_host.c b/drivers/usb/renesas_usbhs/mod_host.c
index 1a7208a50af..bade761a1e5 100644
--- a/drivers/usb/renesas_usbhs/mod_host.c
+++ b/drivers/usb/renesas_usbhs/mod_host.c
@@ -103,7 +103,7 @@ struct usbhsh_hpriv {
 
 	u32	port_stat;	/* USB_PORT_STAT_xxx */
 
-	struct completion	*done;
+	struct completion	setup_ack_done;
 
 	/* see usbhsh_req_alloc/free */
 	struct list_head	ureq_link_active;
@@ -355,6 +355,7 @@ static void usbhsh_device_free(struct usbhsh_hpriv *hpriv,
 struct usbhsh_ep *usbhsh_endpoint_alloc(struct usbhsh_hpriv *hpriv,
 					struct usbhsh_device *udev,
 					struct usb_host_endpoint *ep,
+					int dir_in_req,
 					gfp_t mem_flags)
 {
 	struct usbhs_priv *priv = usbhsh_hpriv_to_priv(hpriv);
@@ -364,27 +365,38 @@ struct usbhsh_ep *usbhsh_endpoint_alloc(struct usbhsh_hpriv *hpriv,
 	struct usbhs_pipe *pipe, *best_pipe;
 	struct device *dev = usbhsh_hcd_to_dev(hcd);
 	struct usb_endpoint_descriptor *desc = &ep->desc;
-	int type, i;
+	int type, i, dir_in;
 	unsigned int min_usr;
 
+	dir_in_req = !!dir_in_req;
+
 	uep = kzalloc(sizeof(struct usbhsh_ep), mem_flags);
 	if (!uep) {
 		dev_err(dev, "usbhsh_ep alloc fail\n");
 		return NULL;
 	}
-	type = usb_endpoint_type(desc);
+
+	if (usb_endpoint_xfer_control(desc)) {
+		best_pipe = usbhsh_hpriv_to_dcp(hpriv);
+		goto usbhsh_endpoint_alloc_find_pipe;
+	}
 
 	/*
 	 * find best pipe for endpoint
 	 * see
 	 *	HARDWARE LIMITATION
 	 */
+	type = usb_endpoint_type(desc);
 	min_usr = ~0;
 	best_pipe = NULL;
-	usbhs_for_each_pipe_with_dcp(pipe, priv, i) {
+	usbhs_for_each_pipe(pipe, priv, i) {
 		if (!usbhs_pipe_type_is(pipe, type))
 			continue;
 
+		dir_in = !!usbhs_pipe_is_dir_in(pipe);
+		if (0 != (dir_in - dir_in_req))
+			continue;
+
 		info = usbhsh_pipe_info(pipe);
 
 		if (min_usr > info->usr_cnt) {
@@ -398,7 +410,7 @@ struct usbhsh_ep *usbhsh_endpoint_alloc(struct usbhsh_hpriv *hpriv,
 		kfree(uep);
 		return NULL;
 	}
-
+usbhsh_endpoint_alloc_find_pipe:
 	/*
 	 * init uep
 	 */
@@ -423,6 +435,7 @@ struct usbhsh_ep *usbhsh_endpoint_alloc(struct usbhsh_hpriv *hpriv,
 	 * see
 	 *  DCPMAXP/PIPEMAXP
 	 */
+	usbhs_pipe_sequence_data0(uep->pipe);
 	usbhs_pipe_config_update(uep->pipe,
 				 usbhsh_device_number(hpriv, udev),
 				 usb_endpoint_num(desc),
@@ -430,7 +443,7 @@ struct usbhsh_ep *usbhsh_endpoint_alloc(struct usbhsh_hpriv *hpriv,
 
 	dev_dbg(dev, "%s [%d-%s](%p)\n", __func__,
 		usbhsh_device_number(hpriv, udev),
-		usbhs_pipe_name(pipe), uep);
+		usbhs_pipe_name(uep->pipe), uep);
 
 	return uep;
 }
@@ -549,8 +562,7 @@ static void usbhsh_setup_stage_packet_push(struct usbhsh_hpriv *hpriv,
 	 *	usbhsh_irq_setup_ack()
 	 *	usbhsh_irq_setup_err()
 	 */
-	DECLARE_COMPLETION(done);
-	hpriv->done = &done;
+	init_completion(&hpriv->setup_ack_done);
 
 	/* copy original request */
 	memcpy(&req, urb->setup_packet, sizeof(struct usb_ctrlrequest));
@@ -572,8 +584,7 @@ static void usbhsh_setup_stage_packet_push(struct usbhsh_hpriv *hpriv,
 	/*
 	 * wait setup packet ACK
 	 */
-	wait_for_completion(&done);
-	hpriv->done = NULL;
+	wait_for_completion(&hpriv->setup_ack_done);
 
 	dev_dbg(dev, "%s done\n", __func__);
 }
@@ -724,11 +735,11 @@ static int usbhsh_urb_enqueue(struct usb_hcd *hcd,
 	struct usbhsh_device *udev, *new_udev = NULL;
 	struct usbhs_pipe *pipe;
 	struct usbhsh_ep *uep;
+	int is_dir_in = usb_pipein(urb->pipe);
 
 	int ret;
 
-	dev_dbg(dev, "%s (%s)\n",
-		__func__, usb_pipein(urb->pipe) ? "in" : "out");
+	dev_dbg(dev, "%s (%s)\n", __func__, is_dir_in ? "in" : "out");
 
 	ret = usb_hcd_link_urb_to_ep(hcd, urb);
 	if (ret)
@@ -751,7 +762,8 @@ static int usbhsh_urb_enqueue(struct usb_hcd *hcd,
 	 */
 	uep = usbhsh_ep_to_uep(ep);
 	if (!uep) {
-		uep = usbhsh_endpoint_alloc(hpriv, udev, ep, mem_flags);
+		uep = usbhsh_endpoint_alloc(hpriv, udev, ep,
+					    is_dir_in, mem_flags);
 		if (!uep)
 			goto usbhsh_urb_enqueue_error_free_device;
 	}
@@ -1095,10 +1107,7 @@ static int usbhsh_irq_setup_ack(struct usbhs_priv *priv,
 
 	dev_dbg(dev, "setup packet OK\n");
 
-	if (unlikely(!hpriv->done))
-		dev_err(dev, "setup ack happen without necessary data\n");
-	else
-		complete(hpriv->done); /* see usbhsh_urb_enqueue() */
+	complete(&hpriv->setup_ack_done); /* see usbhsh_urb_enqueue() */
 
 	return 0;
 }
@@ -1111,10 +1120,7 @@ static int usbhsh_irq_setup_err(struct usbhs_priv *priv,
 
 	dev_dbg(dev, "setup packet Err\n");
 
-	if (unlikely(!hpriv->done))
-		dev_err(dev, "setup err happen without necessary data\n");
-	else
-		complete(hpriv->done); /* see usbhsh_urb_enqueue() */
+	complete(&hpriv->setup_ack_done); /* see usbhsh_urb_enqueue() */
 
 	return 0;
 }
@@ -1221,8 +1227,18 @@ static int usbhsh_stop(struct usbhs_priv *priv)
 {
 	struct usbhsh_hpriv *hpriv = usbhsh_priv_to_hpriv(priv);
 	struct usb_hcd *hcd = usbhsh_hpriv_to_hcd(hpriv);
+	struct usbhs_mod *mod = usbhs_mod_get_current(priv);
 	struct device *dev = usbhs_priv_to_dev(priv);
 
+	/*
+	 * disable irq callback
+	 */
+	mod->irq_attch	= NULL;
+	mod->irq_dtch	= NULL;
+	mod->irq_sack	= NULL;
+	mod->irq_sign	= NULL;
+	usbhs_irq_callback_update(priv, mod);
+
 	usb_remove_hcd(hcd);
 
 	/* disable sys */
@@ -1235,7 +1251,7 @@ static int usbhsh_stop(struct usbhs_priv *priv)
 	return 0;
 }
 
-int __devinit usbhs_mod_host_probe(struct usbhs_priv *priv)
+int usbhs_mod_host_probe(struct usbhs_priv *priv)
 {
 	struct usbhsh_hpriv *hpriv;
 	struct usb_hcd *hcd;
@@ -1279,7 +1295,6 @@ int __devinit usbhs_mod_host_probe(struct usbhs_priv *priv)
 	hpriv->mod.stop		= usbhsh_stop;
 	hpriv->pipe_info	= pipe_info;
 	hpriv->pipe_size	= pipe_size;
-	hpriv->done		= NULL;
 	usbhsh_req_list_init(hpriv);
 	usbhsh_port_stat_init(hpriv);
 
@@ -1299,7 +1314,7 @@ usbhs_mod_host_probe_err:
 	return -ENOMEM;
 }
 
-int __devexit usbhs_mod_host_remove(struct usbhs_priv *priv)
+int usbhs_mod_host_remove(struct usbhs_priv *priv)
 {
 	struct usbhsh_hpriv *hpriv = usbhsh_priv_to_hpriv(priv);
 	struct usb_hcd *hcd = usbhsh_hpriv_to_hcd(hpriv);
diff --git a/drivers/usb/serial/ark3116.c b/drivers/usb/serial/ark3116.c
index 5cdb9d91227..18e875b92e0 100644
--- a/drivers/usb/serial/ark3116.c
+++ b/drivers/usb/serial/ark3116.c
@@ -42,7 +42,7 @@ static int debug;
  * Version information
  */
 
-#define DRIVER_VERSION "v0.6"
+#define DRIVER_VERSION "v0.7"
 #define DRIVER_AUTHOR "Bart Hartgers <bart.hartgers+ark3116@gmail.com>"
 #define DRIVER_DESC "USB ARK3116 serial/IrDA driver"
 #define DRIVER_DEV_DESC "ARK3116 RS232/IrDA"
@@ -380,10 +380,6 @@ static int ark3116_open(struct tty_struct *tty, struct usb_serial_port *port)
 		goto err_out;
 	}
 
-	/* setup termios */
-	if (tty)
-		ark3116_set_termios(tty, port, NULL);
-
 	/* remove any data still left: also clears error state */
 	ark3116_read_reg(serial, UART_RX, buf);
 
@@ -406,6 +402,10 @@ static int ark3116_open(struct tty_struct *tty, struct usb_serial_port *port)
 	/* enable DMA */
 	ark3116_write_reg(port->serial, UART_FCR, UART_FCR_DMA_SELECT);
 
+	/* setup termios */
+	if (tty)
+		ark3116_set_termios(tty, port, NULL);
+
 err_out:
 	kfree(buf);
 	return result;
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 8fe034d2d3e..bd4298bb675 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -2104,13 +2104,19 @@ static void ftdi_set_termios(struct tty_struct *tty,
 
 	cflag = termios->c_cflag;
 
-	/* FIXME -For this cut I don't care if the line is really changing or
-	   not  - so just do the change regardless  - should be able to
-	   compare old_termios and tty->termios */
+	if (old_termios->c_cflag == termios->c_cflag
+	    && old_termios->c_ispeed == termios->c_ispeed
+	    && old_termios->c_ospeed == termios->c_ospeed)
+		goto no_c_cflag_changes;
+
 	/* NOTE These routines can get interrupted by
 	   ftdi_sio_read_bulk_callback  - need to examine what this means -
 	   don't see any problems yet */
 
+	if ((old_termios->c_cflag & (CSIZE|PARODD|PARENB|CMSPAR|CSTOPB)) ==
+	    (termios->c_cflag & (CSIZE|PARODD|PARENB|CMSPAR|CSTOPB)))
+		goto no_data_parity_stop_changes;
+
 	/* Set number of data bits, parity, stop bits */
 
 	urb_value = 0;
@@ -2151,6 +2157,7 @@ static void ftdi_set_termios(struct tty_struct *tty,
 	}
 
 	/* Now do the baudrate */
+no_data_parity_stop_changes:
 	if ((cflag & CBAUD) == B0) {
 		/* Disable flow control */
 		if (usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
@@ -2178,6 +2185,7 @@ static void ftdi_set_termios(struct tty_struct *tty,
 
 	/* Set flow control */
 	/* Note device also supports DTR/CD (ugh) and Xon/Xoff in hardware */
+no_c_cflag_changes:
 	if (cflag & CRTSCTS) {
 		dbg("%s Setting to CRTSCTS flow control", __func__);
 		if (usb_control_msg(dev,
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 89ae1f65e1b..d865878c9f9 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -156,6 +156,7 @@ static void option_instat_callback(struct urb *urb);
 #define HUAWEI_PRODUCT_K4511			0x14CC
 #define HUAWEI_PRODUCT_ETS1220			0x1803
 #define HUAWEI_PRODUCT_E353			0x1506
+#define HUAWEI_PRODUCT_E173S			0x1C05
 
 #define QUANTA_VENDOR_ID			0x0408
 #define QUANTA_PRODUCT_Q101			0xEA02
@@ -316,6 +317,9 @@ static void option_instat_callback(struct urb *urb);
 #define ZTE_PRODUCT_AC8710			0xfff1
 #define ZTE_PRODUCT_AC2726			0xfff5
 #define ZTE_PRODUCT_AC8710T			0xffff
+#define ZTE_PRODUCT_MC2718			0xffe8
+#define ZTE_PRODUCT_AD3812			0xffeb
+#define ZTE_PRODUCT_MC2716			0xffed
 
 #define BENQ_VENDOR_ID				0x04a5
 #define BENQ_PRODUCT_H10			0x4068
@@ -468,6 +472,10 @@ static void option_instat_callback(struct urb *urb);
 #define YUGA_PRODUCT_CLU528			0x260D
 #define YUGA_PRODUCT_CLU526			0x260F
 
+/* Viettel products */
+#define VIETTEL_VENDOR_ID			0x2262
+#define VIETTEL_PRODUCT_VT1000			0x0002
+
 /* some devices interfaces need special handling due to a number of reasons */
 enum option_blacklist_reason {
 		OPTION_BLACKLIST_NONE = 0,
@@ -500,6 +508,18 @@ static const struct option_blacklist_info zte_k3765_z_blacklist = {
 	.reserved = BIT(4),
 };
 
+static const struct option_blacklist_info zte_ad3812_z_blacklist = {
+	.sendsetup = BIT(0) | BIT(1) | BIT(2),
+};
+
+static const struct option_blacklist_info zte_mc2718_z_blacklist = {
+	.sendsetup = BIT(1) | BIT(2) | BIT(3) | BIT(4),
+};
+
+static const struct option_blacklist_info zte_mc2716_z_blacklist = {
+	.sendsetup = BIT(1) | BIT(2) | BIT(3),
+};
+
 static const struct option_blacklist_info huawei_cdc12_blacklist = {
 	.reserved = BIT(1) | BIT(2),
 };
@@ -622,6 +642,7 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E143D, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E143E, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E143F, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E173S, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K4505, 0xff, 0xff, 0xff),
 		.driver_info = (kernel_ulong_t) &huawei_cdc12_blacklist },
 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K3765, 0xff, 0xff, 0xff),
@@ -1043,6 +1064,12 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AC8710, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AC2726, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AC8710T, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MC2718, 0xff, 0xff, 0xff),
+	 .driver_info = (kernel_ulong_t)&zte_mc2718_z_blacklist },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AD3812, 0xff, 0xff, 0xff),
+	 .driver_info = (kernel_ulong_t)&zte_ad3812_z_blacklist },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MC2716, 0xff, 0xff, 0xff),
+	 .driver_info = (kernel_ulong_t)&zte_mc2716_z_blacklist },
 	{ USB_DEVICE(BENQ_VENDOR_ID, BENQ_PRODUCT_H10) },
 	{ USB_DEVICE(DLINK_VENDOR_ID, DLINK_PRODUCT_DWM_652) },
 	{ USB_DEVICE(ALINK_VENDOR_ID, DLINK_PRODUCT_DWM_652_U5) }, /* Yes, ALINK_VENDOR_ID */
@@ -1141,6 +1168,7 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CLU516) },
 	{ USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CLU528) },
 	{ USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CLU526) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(VIETTEL_VENDOR_ID, VIETTEL_PRODUCT_VT1000, 0xff, 0xff, 0xff) },
 	{ } /* Terminating entry */
 };
 MODULE_DEVICE_TABLE(usb, option_ids);
diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c
index 9083d1e616b..fc2d66f7f4e 100644
--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -91,7 +91,6 @@ static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(SONY_VENDOR_ID, SONY_QN3USB_PRODUCT_ID) },
 	{ USB_DEVICE(SANWA_VENDOR_ID, SANWA_PRODUCT_ID) },
 	{ USB_DEVICE(ADLINK_VENDOR_ID, ADLINK_ND6530_PRODUCT_ID) },
-	{ USB_DEVICE(WINCHIPHEAD_VENDOR_ID, WINCHIPHEAD_USBSER_PRODUCT_ID) },
 	{ USB_DEVICE(SMART_VENDOR_ID, SMART_PRODUCT_ID) },
 	{ }					/* Terminating entry */
 };
diff --git a/drivers/usb/serial/pl2303.h b/drivers/usb/serial/pl2303.h
index 3d10d7f0207..c38b8c00c06 100644
--- a/drivers/usb/serial/pl2303.h
+++ b/drivers/usb/serial/pl2303.h
@@ -145,10 +145,6 @@
 #define ADLINK_VENDOR_ID		0x0b63
 #define ADLINK_ND6530_PRODUCT_ID	0x6530
 
-/* WinChipHead USB->RS 232 adapter */
-#define WINCHIPHEAD_VENDOR_ID		0x4348
-#define WINCHIPHEAD_USBSER_PRODUCT_ID	0x5523
-
 /* SMART USB Serial Adapter */
 #define SMART_VENDOR_ID	0x0b8c
 #define SMART_PRODUCT_ID	0x2303
diff --git a/drivers/usb/storage/ene_ub6250.c b/drivers/usb/storage/ene_ub6250.c
index 4dca3ef0668..9fbe742343c 100644
--- a/drivers/usb/storage/ene_ub6250.c
+++ b/drivers/usb/storage/ene_ub6250.c
@@ -1762,10 +1762,9 @@ static int ms_scsi_write(struct us_data *us, struct scsi_cmnd *srb)
 		result = ene_send_scsi_cmd(us, FDIR_WRITE, scsi_sglist(srb), 1);
 	} else {
 		void *buf;
-		int offset;
+		int offset = 0;
 		u16 PhyBlockAddr;
 		u8 PageNum;
-		u32 result;
 		u16 len, oldphy, newphy;
 
 		buf = kmalloc(blenByte, GFP_KERNEL);
diff --git a/drivers/usb/storage/protocol.c b/drivers/usb/storage/protocol.c
index 93c1a4d86f5..82dd834709c 100644
--- a/drivers/usb/storage/protocol.c
+++ b/drivers/usb/storage/protocol.c
@@ -59,7 +59,9 @@
 
 void usb_stor_pad12_command(struct scsi_cmnd *srb, struct us_data *us)
 {
-	/* Pad the SCSI command with zeros out to 12 bytes
+	/*
+	 * Pad the SCSI command with zeros out to 12 bytes.  If the
+	 * command already is 12 bytes or longer, leave it alone.
 	 *
 	 * NOTE: This only works because a scsi_cmnd struct field contains
 	 * a unsigned char cmnd[16], so we know we have storage available
@@ -67,9 +69,6 @@ void usb_stor_pad12_command(struct scsi_cmnd *srb, struct us_data *us)
 	for (; srb->cmd_len<12; srb->cmd_len++)
 		srb->cmnd[srb->cmd_len] = 0;
 
-	/* set command length to 12 bytes */
-	srb->cmd_len = 12;
-
 	/* send the command to the transport layer */
 	usb_stor_invoke_transport(srb, us);
 }