diff options
author | Jeff Garzik <jeff@garzik.org> | 2006-08-19 17:25:34 -0400 |
---|---|---|
committer | Jeff Garzik <jeff@garzik.org> | 2006-08-19 17:25:34 -0400 |
commit | 41ace1861a93f12f70ff10026fb1539fea38fcf8 (patch) | |
tree | c6d841ae9b73d6b7d6a887c21ce378cebc9c97f7 /drivers | |
parent | 09e590e5d5a93f2eaa748a89c623258e6bad1648 (diff) | |
parent | ef7d1b244fa6c94fb76d5f787b8629df64ea4046 (diff) | |
download | linux-3.10-41ace1861a93f12f70ff10026fb1539fea38fcf8.tar.gz linux-3.10-41ace1861a93f12f70ff10026fb1539fea38fcf8.tar.bz2 linux-3.10-41ace1861a93f12f70ff10026fb1539fea38fcf8.zip |
Merge branch 'master' into upstream-fixes
Diffstat (limited to 'drivers')
54 files changed, 374 insertions, 277 deletions
diff --git a/drivers/char/watchdog/Kconfig b/drivers/char/watchdog/Kconfig index d53f664a4dd..fff89c2d88f 100644 --- a/drivers/char/watchdog/Kconfig +++ b/drivers/char/watchdog/Kconfig @@ -45,7 +45,7 @@ config WATCHDOG_NOWAYOUT comment "Watchdog Device Drivers" depends on WATCHDOG -# Architecture Independant +# Architecture Independent config SOFT_WATCHDOG tristate "Software watchdog" @@ -127,7 +127,7 @@ config S3C2410_WATCHDOG enabled. The driver is limited by the speed of the system's PCLK - signal, so with reasonbaly fast systems (PCLK around 50-66MHz) + signal, so with reasonably fast systems (PCLK around 50-66MHz) then watchdog intervals of over approximately 20seconds are unavailable. @@ -423,7 +423,7 @@ config SBC_EPX_C3_WATCHDOG is no way to know if writing to its IO address will corrupt your system or have any real effect. The only way to be sure that this driver does what you want is to make sure you - are runnning it on an EPX-C3 from Winsystems with the watchdog + are running it on an EPX-C3 from Winsystems with the watchdog timer at IO address 0x1ee and 0x1ef. It will write to both those IO ports. Basically, the assumption is made that if you compile this driver into your kernel and/or load it as a module, that you @@ -472,7 +472,7 @@ config INDYDOG tristate "Indy/I2 Hardware Watchdog" depends on WATCHDOG && SGI_IP22 help - Hardwaredriver for the Indy's/I2's watchdog. This is a + Hardware driver for the Indy's/I2's watchdog. This is a watchdog timer that will reboot the machine after a 60 second timer expired and no process has written to /dev/watchdog during that time. diff --git a/drivers/ide/pci/generic.c b/drivers/ide/pci/generic.c index 2f962cfa3f7..78810ba982e 100644 --- a/drivers/ide/pci/generic.c +++ b/drivers/ide/pci/generic.c @@ -180,6 +180,36 @@ static ide_pci_device_t generic_chipsets[] __devinitdata = { .channels = 2, .autodma = AUTODMA, .bootable = OFF_BOARD, + },{ /* 15 */ + .name = "JMB361", + .init_hwif = init_hwif_generic, + .channels = 2, + .autodma = AUTODMA, + .bootable = OFF_BOARD, + },{ /* 16 */ + .name = "JMB363", + .init_hwif = init_hwif_generic, + .channels = 2, + .autodma = AUTODMA, + .bootable = OFF_BOARD, + },{ /* 17 */ + .name = "JMB365", + .init_hwif = init_hwif_generic, + .channels = 2, + .autodma = AUTODMA, + .bootable = OFF_BOARD, + },{ /* 18 */ + .name = "JMB366", + .init_hwif = init_hwif_generic, + .channels = 2, + .autodma = AUTODMA, + .bootable = OFF_BOARD, + },{ /* 19 */ + .name = "JMB368", + .init_hwif = init_hwif_generic, + .channels = 2, + .autodma = AUTODMA, + .bootable = OFF_BOARD, } }; diff --git a/drivers/md/dm-mpath.c b/drivers/md/dm-mpath.c index 217615b3322..93f701ea87b 100644 --- a/drivers/md/dm-mpath.c +++ b/drivers/md/dm-mpath.c @@ -710,6 +710,8 @@ static int multipath_ctr(struct dm_target *ti, unsigned int argc, return -EINVAL; } + m->ti = ti; + r = parse_features(&as, m, ti); if (r) goto bad; @@ -751,7 +753,6 @@ static int multipath_ctr(struct dm_target *ti, unsigned int argc, } ti->private = m; - m->ti = ti; return 0; diff --git a/drivers/media/dvb/bt8xx/dst.c b/drivers/media/dvb/bt8xx/dst.c index d687a14ec0a..06ac899a9a2 100644 --- a/drivers/media/dvb/bt8xx/dst.c +++ b/drivers/media/dvb/bt8xx/dst.c @@ -393,7 +393,7 @@ static int dst_set_bandwidth(struct dst_state *state, fe_bandwidth_t bandwidth) state->bandwidth = bandwidth; if (state->dst_type != DST_TYPE_IS_TERR) - return 0; + return -EOPNOTSUPP; switch (bandwidth) { case BANDWIDTH_6_MHZ: @@ -462,7 +462,7 @@ static int dst_set_symbolrate(struct dst_state *state, u32 srate) state->symbol_rate = srate; if (state->dst_type == DST_TYPE_IS_TERR) { - return 0; + return -EOPNOTSUPP; } dprintk(verbose, DST_INFO, 1, "set symrate %u", srate); srate /= 1000; @@ -504,7 +504,7 @@ static int dst_set_symbolrate(struct dst_state *state, u32 srate) static int dst_set_modulation(struct dst_state *state, fe_modulation_t modulation) { if (state->dst_type != DST_TYPE_IS_CABLE) - return 0; + return -EOPNOTSUPP; state->modulation = modulation; switch (modulation) { @@ -1234,7 +1234,7 @@ int dst_command(struct dst_state *state, u8 *data, u8 len) goto error; } if (write_dst(state, data, len)) { - dprintk(verbose, DST_INFO, 1, "Tring to recover.. "); + dprintk(verbose, DST_INFO, 1, "Trying to recover.. "); if ((dst_error_recovery(state)) < 0) { dprintk(verbose, DST_ERROR, 1, "Recovery Failed."); goto error; @@ -1328,15 +1328,13 @@ static int dst_tone_power_cmd(struct dst_state *state) { u8 paket[8] = { 0x00, 0x09, 0xff, 0xff, 0x01, 0x00, 0x00, 0x00 }; - if (state->dst_type == DST_TYPE_IS_TERR) - return 0; + if (state->dst_type != DST_TYPE_IS_SAT) + return -EOPNOTSUPP; paket[4] = state->tx_tuna[4]; paket[2] = state->tx_tuna[2]; paket[3] = state->tx_tuna[3]; paket[7] = dst_check_sum (paket, 7); - dst_command(state, paket, 8); - - return 0; + return dst_command(state, paket, 8); } static int dst_get_tuna(struct dst_state *state) @@ -1465,7 +1463,7 @@ static int dst_set_diseqc(struct dvb_frontend *fe, struct dvb_diseqc_master_cmd u8 paket[8] = { 0x00, 0x08, 0x04, 0xe0, 0x10, 0x38, 0xf0, 0xec }; if (state->dst_type != DST_TYPE_IS_SAT) - return 0; + return -EOPNOTSUPP; if (cmd->msg_len > 0 && cmd->msg_len < 5) memcpy(&paket[3], cmd->msg, cmd->msg_len); else if (cmd->msg_len == 5 && state->dst_hw_cap & DST_TYPE_HAS_DISEQC5) @@ -1473,18 +1471,17 @@ static int dst_set_diseqc(struct dvb_frontend *fe, struct dvb_diseqc_master_cmd else return -EINVAL; paket[7] = dst_check_sum(&paket[0], 7); - dst_command(state, paket, 8); - return 0; + return dst_command(state, paket, 8); } static int dst_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage) { - int need_cmd; + int need_cmd, retval = 0; struct dst_state *state = fe->demodulator_priv; state->voltage = voltage; if (state->dst_type != DST_TYPE_IS_SAT) - return 0; + return -EOPNOTSUPP; need_cmd = 0; @@ -1506,9 +1503,9 @@ static int dst_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage) } if (need_cmd) - dst_tone_power_cmd(state); + retval = dst_tone_power_cmd(state); - return 0; + return retval; } static int dst_set_tone(struct dvb_frontend *fe, fe_sec_tone_mode_t tone) @@ -1517,7 +1514,7 @@ static int dst_set_tone(struct dvb_frontend *fe, fe_sec_tone_mode_t tone) state->tone = tone; if (state->dst_type != DST_TYPE_IS_SAT) - return 0; + return -EOPNOTSUPP; switch (tone) { case SEC_TONE_OFF: @@ -1533,9 +1530,7 @@ static int dst_set_tone(struct dvb_frontend *fe, fe_sec_tone_mode_t tone) default: return -EINVAL; } - dst_tone_power_cmd(state); - - return 0; + return dst_tone_power_cmd(state); } static int dst_send_burst(struct dvb_frontend *fe, fe_sec_mini_cmd_t minicmd) @@ -1543,7 +1538,7 @@ static int dst_send_burst(struct dvb_frontend *fe, fe_sec_mini_cmd_t minicmd) struct dst_state *state = fe->demodulator_priv; if (state->dst_type != DST_TYPE_IS_SAT) - return 0; + return -EOPNOTSUPP; state->minicmd = minicmd; switch (minicmd) { case SEC_MINI_A: @@ -1553,9 +1548,7 @@ static int dst_send_burst(struct dvb_frontend *fe, fe_sec_mini_cmd_t minicmd) state->tx_tuna[3] = 0xff; break; } - dst_tone_power_cmd(state); - - return 0; + return dst_tone_power_cmd(state); } @@ -1608,28 +1601,31 @@ static int dst_read_signal_strength(struct dvb_frontend *fe, u16 *strength) { struct dst_state *state = fe->demodulator_priv; - dst_get_signal(state); + int retval = dst_get_signal(state); *strength = state->decode_strength; - return 0; + return retval; } static int dst_read_snr(struct dvb_frontend *fe, u16 *snr) { struct dst_state *state = fe->demodulator_priv; - dst_get_signal(state); + int retval = dst_get_signal(state); *snr = state->decode_snr; - return 0; + return retval; } static int dst_set_frontend(struct dvb_frontend *fe, struct dvb_frontend_parameters *p) { + int retval = -EINVAL; struct dst_state *state = fe->demodulator_priv; if (p != NULL) { - dst_set_freq(state, p->frequency); + retval = dst_set_freq(state, p->frequency); + if(retval != 0) + return retval; dprintk(verbose, DST_DEBUG, 1, "Set Frequency=[%d]", p->frequency); if (state->dst_type == DST_TYPE_IS_SAT) { @@ -1647,10 +1643,10 @@ static int dst_set_frontend(struct dvb_frontend *fe, struct dvb_frontend_paramet dst_set_symbolrate(state, p->u.qam.symbol_rate); dst_set_modulation(state, p->u.qam.modulation); } - dst_write_tuna(fe); + retval = dst_write_tuna(fe); } - return 0; + return retval; } static int dst_tune_frontend(struct dvb_frontend* fe, diff --git a/drivers/media/dvb/dvb-core/Makefile b/drivers/media/dvb/dvb-core/Makefile index 11054657fdb..0b5182835cc 100644 --- a/drivers/media/dvb/dvb-core/Makefile +++ b/drivers/media/dvb/dvb-core/Makefile @@ -2,8 +2,8 @@ # Makefile for the kernel DVB device drivers. # -dvb-core-objs = dvbdev.o dmxdev.o dvb_demux.o dvb_filter.o \ - dvb_ca_en50221.o dvb_frontend.o \ - dvb_net.o dvb_ringbuffer.o dvb_math.o +dvb-core-objs := dvbdev.o dmxdev.o dvb_demux.o dvb_filter.o \ + dvb_ca_en50221.o dvb_frontend.o \ + dvb_net.o dvb_ringbuffer.o dvb_math.o obj-$(CONFIG_DVB_CORE) += dvb-core.o diff --git a/drivers/media/radio/Kconfig b/drivers/media/radio/Kconfig index de3128a31de..220076b1b95 100644 --- a/drivers/media/radio/Kconfig +++ b/drivers/media/radio/Kconfig @@ -350,5 +350,15 @@ config RADIO_ZOLTRIX_PORT help Enter the I/O port of your Zoltrix radio card. -endmenu +config USB_DSBR + tristate "D-Link USB FM radio support (EXPERIMENTAL)" + depends on USB && VIDEO_V4L1 && EXPERIMENTAL + ---help--- + Say Y here if you want to connect this type of radio to your + computer's USB port. Note that the audio is not digital, and + you must connect the line out connector to a sound card or a + set of speakers. + To compile this driver as a module, choose M here: the + module will be called dsbr100. +endmenu diff --git a/drivers/media/radio/Makefile b/drivers/media/radio/Makefile index e95b6805e00..cf55a18e3dd 100644 --- a/drivers/media/radio/Makefile +++ b/drivers/media/radio/Makefile @@ -20,5 +20,6 @@ obj-$(CONFIG_RADIO_GEMTEK) += radio-gemtek.o obj-$(CONFIG_RADIO_GEMTEK_PCI) += radio-gemtek-pci.o obj-$(CONFIG_RADIO_TRUST) += radio-trust.o obj-$(CONFIG_RADIO_MAESTRO) += radio-maestro.o +obj-$(CONFIG_USB_DSBR) += dsbr100.o EXTRA_CFLAGS += -Isound diff --git a/drivers/media/video/dsbr100.c b/drivers/media/radio/dsbr100.c index f7e33f9ee8e..f7e33f9ee8e 100644 --- a/drivers/media/video/dsbr100.c +++ b/drivers/media/radio/dsbr100.c diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig index fe56862d51e..732bf1e7c32 100644 --- a/drivers/media/video/Kconfig +++ b/drivers/media/video/Kconfig @@ -449,18 +449,6 @@ source "drivers/media/video/pvrusb2/Kconfig" source "drivers/media/video/em28xx/Kconfig" -config USB_DSBR - tristate "D-Link USB FM radio support (EXPERIMENTAL)" - depends on USB && VIDEO_V4L1 && EXPERIMENTAL - ---help--- - Say Y here if you want to connect this type of radio to your - computer's USB port. Note that the audio is not digital, and - you must connect the line out connector to a sound card or a - set of speakers. - - To compile this driver as a module, choose M here: the - module will be called dsbr100. - source "drivers/media/video/usbvideo/Kconfig" source "drivers/media/video/et61x251/Kconfig" diff --git a/drivers/media/video/Makefile b/drivers/media/video/Makefile index 353d61cfac1..e82e511f2a7 100644 --- a/drivers/media/video/Makefile +++ b/drivers/media/video/Makefile @@ -77,7 +77,6 @@ obj-$(CONFIG_VIDEO_UPD64083) += upd64083.o obj-$(CONFIG_VIDEO_CX2341X) += cx2341x.o obj-$(CONFIG_USB_DABUSB) += dabusb.o -obj-$(CONFIG_USB_DSBR) += dsbr100.o obj-$(CONFIG_USB_OV511) += ov511.o obj-$(CONFIG_USB_SE401) += se401.o obj-$(CONFIG_USB_STV680) += stv680.o @@ -91,6 +90,7 @@ obj-$(CONFIG_USB_ZC0301) += zc0301/ obj-$(CONFIG_USB_IBMCAM) += usbvideo/ obj-$(CONFIG_USB_KONICAWC) += usbvideo/ obj-$(CONFIG_USB_VICAM) += usbvideo/ +obj-$(CONFIG_USB_QUICKCAM_MESSENGER) += usbvideo/ obj-$(CONFIG_VIDEO_VIVI) += vivi.o diff --git a/drivers/media/video/compat_ioctl32.c b/drivers/media/video/compat_ioctl32.c index 9dddff42ec1..b69ee119481 100644 --- a/drivers/media/video/compat_ioctl32.c +++ b/drivers/media/video/compat_ioctl32.c @@ -21,7 +21,7 @@ #ifdef CONFIG_COMPAT - +#ifdef CONFIG_VIDEO_V4L1_COMPAT struct video_tuner32 { compat_int_t tuner; char name[32]; @@ -107,6 +107,7 @@ struct video_window32 { compat_caddr_t clips; compat_int_t clipcount; }; +#endif static int native_ioctl(struct file *file, unsigned int cmd, unsigned long arg) { @@ -124,6 +125,7 @@ static int native_ioctl(struct file *file, unsigned int cmd, unsigned long arg) } +#ifdef CONFIG_VIDEO_V4L1_COMPAT /* You get back everything except the clips... */ static int put_video_window32(struct video_window *kp, struct video_window32 __user *up) { @@ -138,6 +140,7 @@ static int put_video_window32(struct video_window *kp, struct video_window32 __u return -EFAULT; return 0; } +#endif struct v4l2_clip32 { @@ -490,6 +493,7 @@ static inline int put_v4l2_input(struct v4l2_input *kp, struct v4l2_input __user return 0; } +#ifdef CONFIG_VIDEO_V4L1_COMPAT struct video_code32 { char loadwhat[16]; /* name or tag of file being passed */ @@ -517,6 +521,8 @@ static inline int microcode32(struct video_code *kp, struct video_code32 __user #define VIDIOCSFREQ32 _IOW('v',15, u32) #define VIDIOCSMICROCODE32 _IOW('v',27, struct video_code32) +#endif + /* VIDIOC_ENUMINPUT32 is VIDIOC_ENUMINPUT minus 4 bytes of padding alignement */ #define VIDIOC_ENUMINPUT32 VIDIOC_ENUMINPUT - _IOC(0, 0, 0, 4) #define VIDIOC_G_FMT32 _IOWR ('V', 4, struct v4l2_format32) @@ -537,6 +543,7 @@ static inline int microcode32(struct video_code *kp, struct video_code32 __user #define VIDIOC_S_INPUT32 _IOWR ('V', 39, compat_int_t) #define VIDIOC_TRY_FMT32 _IOWR ('V', 64, struct v4l2_format32) +#ifdef CONFIG_VIDEO_V4L1_COMPAT enum { MaxClips = (~0U-sizeof(struct video_window))/sizeof(struct video_clip) }; @@ -601,14 +608,17 @@ static int do_set_window(struct file *file, unsigned int cmd, unsigned long arg) return native_ioctl(file, VIDIOCSWIN, (unsigned long)vw); } +#endif static int do_video_ioctl(struct file *file, unsigned int cmd, unsigned long arg) { union { +#ifdef CONFIG_VIDEO_V4L1_COMPAT struct video_tuner vt; struct video_buffer vb; struct video_window vw; struct video_code vc; +#endif struct v4l2_format v2f; struct v4l2_buffer v2b; struct v4l2_framebuffer v2fb; @@ -624,6 +634,7 @@ static int do_video_ioctl(struct file *file, unsigned int cmd, unsigned long arg /* First, convert the command. */ switch(cmd) { +#ifdef CONFIG_VIDEO_V4L1_COMPAT case VIDIOCGTUNER32: cmd = VIDIOCGTUNER; break; case VIDIOCSTUNER32: cmd = VIDIOCSTUNER; break; case VIDIOCGWIN32: cmd = VIDIOCGWIN; break; @@ -631,6 +642,8 @@ static int do_video_ioctl(struct file *file, unsigned int cmd, unsigned long arg case VIDIOCSFBUF32: cmd = VIDIOCSFBUF; break; case VIDIOCGFREQ32: cmd = VIDIOCGFREQ; break; case VIDIOCSFREQ32: cmd = VIDIOCSFREQ; break; + case VIDIOCSMICROCODE32: cmd = VIDIOCSMICROCODE; break; +#endif case VIDIOC_G_FMT32: cmd = VIDIOC_G_FMT; break; case VIDIOC_S_FMT32: cmd = VIDIOC_S_FMT; break; case VIDIOC_QUERYBUF32: cmd = VIDIOC_QUERYBUF; break; @@ -647,10 +660,10 @@ static int do_video_ioctl(struct file *file, unsigned int cmd, unsigned long arg case VIDIOC_G_INPUT32: cmd = VIDIOC_G_INPUT; break; case VIDIOC_S_INPUT32: cmd = VIDIOC_S_INPUT; break; case VIDIOC_TRY_FMT32: cmd = VIDIOC_TRY_FMT; break; - case VIDIOCSMICROCODE32: cmd = VIDIOCSMICROCODE; break; }; switch(cmd) { +#ifdef CONFIG_VIDEO_V4L1_COMPAT case VIDIOCSTUNER: case VIDIOCGTUNER: err = get_video_tuner32(&karg.vt, up); @@ -664,6 +677,7 @@ static int do_video_ioctl(struct file *file, unsigned int cmd, unsigned long arg break; case VIDIOCSFREQ: +#endif case VIDIOC_S_INPUT: case VIDIOC_OVERLAY: case VIDIOC_STREAMON: @@ -717,18 +731,21 @@ static int do_video_ioctl(struct file *file, unsigned int cmd, unsigned long arg compatible_arg = 0; break; +#ifdef CONFIG_VIDEO_V4L1_COMPAT case VIDIOCGWIN: case VIDIOCGFBUF: case VIDIOCGFREQ: +#endif case VIDIOC_G_FBUF: case VIDIOC_G_INPUT: compatible_arg = 0; +#ifdef CONFIG_VIDEO_V4L1_COMPAT case VIDIOCSMICROCODE: err = microcode32(&karg.vc, up); compatible_arg = 0; break; +#endif }; - if(err) goto out; @@ -743,6 +760,7 @@ static int do_video_ioctl(struct file *file, unsigned int cmd, unsigned long arg } if(err == 0) { switch(cmd) { +#ifdef CONFIG_VIDEO_V4L1_COMPAT case VIDIOCGTUNER: err = put_video_tuner32(&karg.vt, up); break; @@ -754,7 +772,7 @@ static int do_video_ioctl(struct file *file, unsigned int cmd, unsigned long arg case VIDIOCGFBUF: err = put_video_buffer32(&karg.vb, up); break; - +#endif case VIDIOC_G_FBUF: err = put_v4l2_framebuffer32(&karg.v2fb, up); break; @@ -792,7 +810,9 @@ static int do_video_ioctl(struct file *file, unsigned int cmd, unsigned long arg err = put_v4l2_input32(&karg.v2i, up); break; +#ifdef CONFIG_VIDEO_V4L1_COMPAT case VIDIOCGFREQ: +#endif case VIDIOC_G_INPUT: err = put_user(((u32)karg.vx), (u32 __user *)up); break; @@ -810,6 +830,7 @@ long v4l_compat_ioctl32(struct file *file, unsigned int cmd, unsigned long arg) return ret; switch (cmd) { +#ifdef CONFIG_VIDEO_V4L1_COMPAT case VIDIOCSWIN32: ret = do_set_window(file, cmd, arg); break; @@ -820,6 +841,7 @@ long v4l_compat_ioctl32(struct file *file, unsigned int cmd, unsigned long arg) case VIDIOCSFBUF32: case VIDIOCGFREQ32: case VIDIOCSFREQ32: +#endif case VIDIOC_QUERYCAP: case VIDIOC_ENUM_FMT: case VIDIOC_G_FMT32: @@ -851,6 +873,7 @@ long v4l_compat_ioctl32(struct file *file, unsigned int cmd, unsigned long arg) ret = do_video_ioctl(file, cmd, arg); break; +#ifdef CONFIG_VIDEO_V4L1_COMPAT /* Little v, the video4linux ioctls (conflict?) */ case VIDIOCGCAP: case VIDIOCGCHAN: @@ -879,6 +902,7 @@ long v4l_compat_ioctl32(struct file *file, unsigned int cmd, unsigned long arg) case _IOR('v' , BASE_VIDIOCPRIVATE+7, int): ret = native_ioctl(file, cmd, (unsigned long)compat_ptr(arg)); break; +#endif default: v4l_print_ioctl("compat_ioctl32", cmd); } diff --git a/drivers/media/video/cx25840/cx25840-core.c b/drivers/media/video/cx25840/cx25840-core.c index 5c2036b40ea..7bb7589a07c 100644 --- a/drivers/media/video/cx25840/cx25840-core.c +++ b/drivers/media/video/cx25840/cx25840-core.c @@ -104,8 +104,8 @@ u32 cx25840_read4(struct i2c_client * client, u16 addr) if (i2c_master_recv(client, buffer, 4) < 4) return 0; - return (buffer[0] << 24) | (buffer[1] << 16) | - (buffer[2] << 8) | buffer[3]; + return (buffer[3] << 24) | (buffer[2] << 16) | + (buffer[1] << 8) | buffer[0]; } int cx25840_and_or(struct i2c_client *client, u16 addr, unsigned and_mask, diff --git a/drivers/media/video/cx88/cx88-video.c b/drivers/media/video/cx88/cx88-video.c index 547cdbdb644..94c92bacc34 100644 --- a/drivers/media/video/cx88/cx88-video.c +++ b/drivers/media/video/cx88/cx88-video.c @@ -1225,7 +1225,7 @@ static int video_do_ioctl(struct inode *inode, struct file *file, struct v4l2_format *f = arg; return cx8800_try_fmt(dev,fh,f); } -#ifdef CONFIG_V4L1_COMPAT +#ifdef CONFIG_VIDEO_V4L1_COMPAT /* --- streaming capture ------------------------------------- */ case VIDIOCGMBUF: { @@ -1584,7 +1584,7 @@ static int radio_do_ioctl(struct inode *inode, struct file *file, *id = 0; return 0; } -#ifdef CONFIG_V4L1_COMPAT +#ifdef CONFIG_VIDEO_V4L1_COMPAT case VIDIOCSTUNER: { struct video_tuner *v = arg; diff --git a/drivers/media/video/msp3400-kthreads.c b/drivers/media/video/msp3400-kthreads.c index f2fd9195b3a..ed02ff81138 100644 --- a/drivers/media/video/msp3400-kthreads.c +++ b/drivers/media/video/msp3400-kthreads.c @@ -961,10 +961,10 @@ int msp34xxg_thread(void *data) /* setup the chip*/ msp34xxg_reset(client); state->std = state->radio ? 0x40 : msp_standard; - if (state->std != 1) - goto unmute; /* start autodetect */ msp_write_dem(client, 0x20, state->std); + if (state->std != 1) + goto unmute; /* watch autodetect */ v4l_dbg(1, msp_debug, client, "started autodetect, waiting for result\n"); diff --git a/drivers/media/video/pwc/Kconfig b/drivers/media/video/pwc/Kconfig index 697145e0bf1..8fdf7101d3b 100644 --- a/drivers/media/video/pwc/Kconfig +++ b/drivers/media/video/pwc/Kconfig @@ -30,7 +30,7 @@ config USB_PWC config USB_PWC_DEBUG bool "USB Philips Cameras verbose debug" - depends USB_PWC + depends on USB_PWC help Say Y here in order to have the pwc driver generate verbose debugging messages. diff --git a/drivers/media/video/pwc/pwc-if.c b/drivers/media/video/pwc/pwc-if.c index 47d0d83a026..d4703944df9 100644 --- a/drivers/media/video/pwc/pwc-if.c +++ b/drivers/media/video/pwc/pwc-if.c @@ -160,6 +160,7 @@ static struct file_operations pwc_fops = { .poll = pwc_video_poll, .mmap = pwc_video_mmap, .ioctl = pwc_video_ioctl, + .compat_ioctl = v4l_compat_ioctl32, .llseek = no_llseek, }; static struct video_device pwc_template = { diff --git a/drivers/media/video/saa7134/saa7134-video.c b/drivers/media/video/saa7134/saa7134-video.c index 8656f2400e1..2c171af9a9f 100644 --- a/drivers/media/video/saa7134/saa7134-video.c +++ b/drivers/media/video/saa7134/saa7134-video.c @@ -2087,7 +2087,7 @@ static int video_do_ioctl(struct inode *inode, struct file *file, struct v4l2_format *f = arg; return saa7134_try_fmt(dev,fh,f); } -#ifdef CONFIG_V4L1_COMPAT +#ifdef CONFIG_VIDEO_V4L1_COMPAT case VIDIOCGMBUF: { struct video_mbuf *mbuf = arg; diff --git a/drivers/media/video/tuner-types.c b/drivers/media/video/tuner-types.c index a167e17c6dc..d7eadc2c298 100644 --- a/drivers/media/video/tuner-types.c +++ b/drivers/media/video/tuner-types.c @@ -1027,10 +1027,11 @@ static struct tuner_params tuner_tnf_5335mf_params[] = { /* 70-79 */ /* ------------ TUNER_SAMSUNG_TCPN_2121P30A - Samsung NTSC ------------ */ +/* '+ 4' turns on the Low Noise Amplifier */ static struct tuner_range tuner_samsung_tcpn_2121p30a_ntsc_ranges[] = { - { 16 * 130.00 /*MHz*/, 0xce, 0x01, }, - { 16 * 364.50 /*MHz*/, 0xce, 0x02, }, - { 16 * 999.99 , 0xce, 0x08, }, + { 16 * 130.00 /*MHz*/, 0xce, 0x01 + 4, }, + { 16 * 364.50 /*MHz*/, 0xce, 0x02 + 4, }, + { 16 * 999.99 , 0xce, 0x08 + 4, }, }; static struct tuner_params tuner_samsung_tcpn_2121p30a_params[] = { @@ -1060,10 +1061,11 @@ static struct tuner_params tuner_thomson_fe6600_params[] = { /* ------------ TUNER_SAMSUNG_TCPG_6121P30A - Samsung PAL ------------ */ +/* '+ 4' turns on the Low Noise Amplifier */ static struct tuner_range tuner_samsung_tcpg_6121p30a_pal_ranges[] = { - { 16 * 146.25 /*MHz*/, 0xce, 0x01, }, - { 16 * 428.50 /*MHz*/, 0xce, 0x02, }, - { 16 * 999.99 , 0xce, 0x08, }, + { 16 * 146.25 /*MHz*/, 0xce, 0x01 + 4, }, + { 16 * 428.50 /*MHz*/, 0xce, 0x02 + 4, }, + { 16 * 999.99 , 0xce, 0x08 + 4, }, }; static struct tuner_params tuner_samsung_tcpg_6121p30a_params[] = { diff --git a/drivers/media/video/v4l1-compat.c b/drivers/media/video/v4l1-compat.c index d83a2c84d23..d7c3fcbc80f 100644 --- a/drivers/media/video/v4l1-compat.c +++ b/drivers/media/video/v4l1-compat.c @@ -599,6 +599,10 @@ v4l_compat_translate_ioctl(struct inode *inode, dprintk("VIDIOCGPICT / VIDIOC_G_FMT: %d\n",err); break; } + + pict->depth = ((fmt2->fmt.pix.bytesperline<<3) + + (fmt2->fmt.pix.width-1) ) + /fmt2->fmt.pix.width; pict->palette = pixelformat_to_palette( fmt2->fmt.pix.pixelformat); break; diff --git a/drivers/media/video/v4l2-common.c b/drivers/media/video/v4l2-common.c index 2ecbeffb559..8d972ffdaf9 100644 --- a/drivers/media/video/v4l2-common.c +++ b/drivers/media/video/v4l2-common.c @@ -202,7 +202,7 @@ static char *v4l2_memory_names[] = { /* ------------------------------------------------------------------ */ /* debug help functions */ -#ifdef CONFIG_V4L1_COMPAT +#ifdef CONFIG_VIDEO_V4L1_COMPAT static const char *v4l1_ioctls[] = { [_IOC_NR(VIDIOCGCAP)] = "VIDIOCGCAP", [_IOC_NR(VIDIOCGCHAN)] = "VIDIOCGCHAN", @@ -301,7 +301,7 @@ static const char *v4l2_ioctls[] = { #define V4L2_IOCTLS ARRAY_SIZE(v4l2_ioctls) static const char *v4l2_int_ioctls[] = { -#ifdef CONFIG_V4L1_COMPAT +#ifdef CONFIG_VIDEO_V4L1_COMPAT [_IOC_NR(DECODER_GET_CAPABILITIES)] = "DECODER_GET_CAPABILITIES", [_IOC_NR(DECODER_GET_STATUS)] = "DECODER_GET_STATUS", [_IOC_NR(DECODER_SET_NORM)] = "DECODER_SET_NORM", @@ -367,7 +367,7 @@ void v4l_printk_ioctl(unsigned int cmd) (_IOC_NR(cmd) < V4L2_INT_IOCTLS) ? v4l2_int_ioctls[_IOC_NR(cmd)] : "UNKNOWN", dir, cmd); break; -#ifdef CONFIG_V4L1_COMPAT +#ifdef CONFIG_VIDEO_V4L1_COMPAT case 'v': printk("v4l1 ioctl %s, dir=%s (0x%08x)\n", (_IOC_NR(cmd) < V4L1_IOCTLS) ? diff --git a/drivers/media/video/videodev.c b/drivers/media/video/videodev.c index 0fc90cd393f..88bf2af2a0e 100644 --- a/drivers/media/video/videodev.c +++ b/drivers/media/video/videodev.c @@ -760,7 +760,7 @@ static int __video_do_ioctl(struct inode *inode, struct file *file, ret=vfd->vidioc_overlay(file, fh, *i); break; } -#ifdef CONFIG_V4L1_COMPAT +#ifdef CONFIG_VIDEO_V4L1_COMPAT /* --- streaming capture ------------------------------------- */ case VIDIOCGMBUF: { diff --git a/drivers/media/video/vivi.c b/drivers/media/video/vivi.c index 38bd0c1018c..841884af0cc 100644 --- a/drivers/media/video/vivi.c +++ b/drivers/media/video/vivi.c @@ -986,7 +986,7 @@ static int vidioc_dqbuf (struct file *file, void *priv, struct v4l2_buffer *p) file->f_flags & O_NONBLOCK)); } -#ifdef CONFIG_V4L1_COMPAT +#ifdef CONFIG_VIDEO_V4L1_COMPAT static int vidiocgmbuf (struct file *file, void *priv, struct video_mbuf *mbuf) { struct vivi_fh *fh=priv; @@ -1328,7 +1328,7 @@ static struct video_device vivi = { .vidioc_s_ctrl = vidioc_s_ctrl, .vidioc_streamon = vidioc_streamon, .vidioc_streamoff = vidioc_streamoff, -#ifdef CONFIG_V4L1_COMPAT +#ifdef CONFIG_VIDEO_V4L1_COMPAT .vidiocgmbuf = vidiocgmbuf, #endif .tvnorms = tvnorms, diff --git a/drivers/mmc/mmc_queue.c b/drivers/mmc/mmc_queue.c index 0b9682e9a35..74f8cdeeff0 100644 --- a/drivers/mmc/mmc_queue.c +++ b/drivers/mmc/mmc_queue.c @@ -79,7 +79,8 @@ static int mmc_queue_thread(void *d) spin_lock_irq(q->queue_lock); set_current_state(TASK_INTERRUPTIBLE); if (!blk_queue_plugged(q)) - mq->req = req = elv_next_request(q); + req = elv_next_request(q); + mq->req = req; spin_unlock_irq(q->queue_lock); if (!req) { diff --git a/drivers/mmc/wbsd.c b/drivers/mmc/wbsd.c index 8a30ef3ae41..c351c6d1a18 100644 --- a/drivers/mmc/wbsd.c +++ b/drivers/mmc/wbsd.c @@ -41,7 +41,7 @@ #include "wbsd.h" #define DRIVER_NAME "wbsd" -#define DRIVER_VERSION "1.5" +#define DRIVER_VERSION "1.6" #define DBG(x...) \ pr_debug(DRIVER_NAME ": " x) @@ -1439,13 +1439,13 @@ static int __devinit wbsd_scan(struct wbsd_host *host) static int __devinit wbsd_request_region(struct wbsd_host *host, int base) { - if (io & 0x7) + if (base & 0x7) return -EINVAL; if (!request_region(base, 8, DRIVER_NAME)) return -EIO; - host->base = io; + host->base = base; return 0; } @@ -1773,7 +1773,7 @@ static int __devinit wbsd_init(struct device *dev, int base, int irq, int dma, /* * Request resources. */ - ret = wbsd_request_resources(host, io, irq, dma); + ret = wbsd_request_resources(host, base, irq, dma); if (ret) { wbsd_release_resources(host); wbsd_free_mmc(dev); @@ -1861,6 +1861,7 @@ static void __devexit wbsd_shutdown(struct device *dev, int pnp) static int __devinit wbsd_probe(struct platform_device *dev) { + /* Use the module parameters for resources */ return wbsd_init(&dev->dev, io, irq, dma, 0); } diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c index db73de0d251..652eb05a6c2 100644 --- a/drivers/net/bnx2.c +++ b/drivers/net/bnx2.c @@ -56,8 +56,8 @@ #define DRV_MODULE_NAME "bnx2" #define PFX DRV_MODULE_NAME ": " -#define DRV_MODULE_VERSION "1.4.43" -#define DRV_MODULE_RELDATE "June 28, 2006" +#define DRV_MODULE_VERSION "1.4.44" +#define DRV_MODULE_RELDATE "August 10, 2006" #define RUN_AT(x) (jiffies + (x)) @@ -209,8 +209,10 @@ MODULE_DEVICE_TABLE(pci, bnx2_pci_tbl); static inline u32 bnx2_tx_avail(struct bnx2 *bp) { - u32 diff = TX_RING_IDX(bp->tx_prod) - TX_RING_IDX(bp->tx_cons); + u32 diff; + smp_mb(); + diff = TX_RING_IDX(bp->tx_prod) - TX_RING_IDX(bp->tx_cons); if (diff > MAX_TX_DESC_CNT) diff = (diff & MAX_TX_DESC_CNT) - 1; return (bp->tx_ring_size - diff); @@ -1569,7 +1571,7 @@ bnx2_alloc_rx_skb(struct bnx2 *bp, u16 index) struct rx_bd *rxbd = &bp->rx_desc_ring[RX_RING(index)][RX_IDX(index)]; unsigned long align; - skb = dev_alloc_skb(bp->rx_buf_size); + skb = netdev_alloc_skb(bp->dev, bp->rx_buf_size); if (skb == NULL) { return -ENOMEM; } @@ -1578,7 +1580,6 @@ bnx2_alloc_rx_skb(struct bnx2 *bp, u16 index) skb_reserve(skb, 8 - align); } - skb->dev = bp->dev; mapping = pci_map_single(bp->pdev, skb->data, bp->rx_buf_use_size, PCI_DMA_FROMDEVICE); @@ -1686,15 +1687,20 @@ bnx2_tx_int(struct bnx2 *bp) } bp->tx_cons = sw_cons; + /* Need to make the tx_cons update visible to bnx2_start_xmit() + * before checking for netif_queue_stopped(). Without the + * memory barrier, there is a small possibility that bnx2_start_xmit() + * will miss it and cause the queue to be stopped forever. + */ + smp_mb(); - if (unlikely(netif_queue_stopped(bp->dev))) { - spin_lock(&bp->tx_lock); + if (unlikely(netif_queue_stopped(bp->dev)) && + (bnx2_tx_avail(bp) > bp->tx_wake_thresh)) { + netif_tx_lock(bp->dev); if ((netif_queue_stopped(bp->dev)) && - (bnx2_tx_avail(bp) > MAX_SKB_FRAGS)) { - + (bnx2_tx_avail(bp) > bp->tx_wake_thresh)) netif_wake_queue(bp->dev); - } - spin_unlock(&bp->tx_lock); + netif_tx_unlock(bp->dev); } } @@ -1786,7 +1792,7 @@ bnx2_rx_int(struct bnx2 *bp, int budget) if ((bp->dev->mtu > 1500) && (len <= RX_COPY_THRESH)) { struct sk_buff *new_skb; - new_skb = dev_alloc_skb(len + 2); + new_skb = netdev_alloc_skb(bp->dev, len + 2); if (new_skb == NULL) goto reuse_rx; @@ -1797,7 +1803,6 @@ bnx2_rx_int(struct bnx2 *bp, int budget) skb_reserve(new_skb, 2); skb_put(new_skb, len); - new_skb->dev = bp->dev; bnx2_reuse_rx_skb(bp, skb, sw_ring_cons, sw_ring_prod); @@ -3503,6 +3508,8 @@ bnx2_init_tx_ring(struct bnx2 *bp) struct tx_bd *txbd; u32 val; + bp->tx_wake_thresh = bp->tx_ring_size / 2; + txbd = &bp->tx_desc_ring[MAX_TX_DESC_CNT]; txbd->tx_bd_haddr_hi = (u64) bp->tx_desc_mapping >> 32; @@ -3952,7 +3959,7 @@ bnx2_run_loopback(struct bnx2 *bp, int loopback_mode) return -EINVAL; pkt_size = 1514; - skb = dev_alloc_skb(pkt_size); + skb = netdev_alloc_skb(bp->dev, pkt_size); if (!skb) return -ENOMEM; packet = skb_put(skb, pkt_size); @@ -4390,10 +4397,8 @@ bnx2_vlan_rx_kill_vid(struct net_device *dev, uint16_t vid) #endif /* Called with netif_tx_lock. - * hard_start_xmit is pseudo-lockless - a lock is only required when - * the tx queue is full. This way, we get the benefit of lockless - * operations most of the time without the complexities to handle - * netif_stop_queue/wake_queue race conditions. + * bnx2_tx_int() runs without netif_tx_lock unless it needs to call + * netif_wake_queue(). */ static int bnx2_start_xmit(struct sk_buff *skb, struct net_device *dev) @@ -4512,12 +4517,9 @@ bnx2_start_xmit(struct sk_buff *skb, struct net_device *dev) dev->trans_start = jiffies; if (unlikely(bnx2_tx_avail(bp) <= MAX_SKB_FRAGS)) { - spin_lock(&bp->tx_lock); netif_stop_queue(dev); - - if (bnx2_tx_avail(bp) > MAX_SKB_FRAGS) + if (bnx2_tx_avail(bp) > bp->tx_wake_thresh) netif_wake_queue(dev); - spin_unlock(&bp->tx_lock); } return NETDEV_TX_OK; @@ -5628,7 +5630,6 @@ bnx2_init_board(struct pci_dev *pdev, struct net_device *dev) bp->pdev = pdev; spin_lock_init(&bp->phy_lock); - spin_lock_init(&bp->tx_lock); INIT_WORK(&bp->reset_task, bnx2_reset_task, bp); dev->base_addr = dev->mem_start = pci_resource_start(pdev, 0); @@ -5751,7 +5752,7 @@ bnx2_init_board(struct pci_dev *pdev, struct net_device *dev) bp->mac_addr[5] = (u8) reg; bp->tx_ring_size = MAX_TX_DESC_CNT; - bnx2_set_rx_ring_size(bp, 100); + bnx2_set_rx_ring_size(bp, 255); bp->rx_csum = 1; diff --git a/drivers/net/bnx2.h b/drivers/net/bnx2.h index 658c5ee95c7..fe804763c60 100644 --- a/drivers/net/bnx2.h +++ b/drivers/net/bnx2.h @@ -3890,10 +3890,6 @@ struct bnx2 { u32 tx_prod_bseq __attribute__((aligned(L1_CACHE_BYTES))); u16 tx_prod; - struct tx_bd *tx_desc_ring; - struct sw_bd *tx_buf_ring; - int tx_ring_size; - u16 tx_cons __attribute__((aligned(L1_CACHE_BYTES))); u16 hw_tx_cons; @@ -3916,9 +3912,11 @@ struct bnx2 { struct sw_bd *rx_buf_ring; struct rx_bd *rx_desc_ring[MAX_RX_RINGS]; - /* Only used to synchronize netif_stop_queue/wake_queue when tx */ - /* ring is full */ - spinlock_t tx_lock; + /* TX constants */ + struct tx_bd *tx_desc_ring; + struct sw_bd *tx_buf_ring; + int tx_ring_size; + u32 tx_wake_thresh; /* End of fields used in the performance code paths. */ diff --git a/drivers/net/ppp_generic.c b/drivers/net/ppp_generic.c index 0ec6e9d57b9..c872f7c6cce 100644 --- a/drivers/net/ppp_generic.c +++ b/drivers/net/ppp_generic.c @@ -192,7 +192,7 @@ struct cardmap { void *ptr[CARDMAP_WIDTH]; }; static void *cardmap_get(struct cardmap *map, unsigned int nr); -static void cardmap_set(struct cardmap **map, unsigned int nr, void *ptr); +static int cardmap_set(struct cardmap **map, unsigned int nr, void *ptr); static unsigned int cardmap_find_first_free(struct cardmap *map); static void cardmap_destroy(struct cardmap **map); @@ -1995,10 +1995,9 @@ ppp_register_channel(struct ppp_channel *chan) { struct channel *pch; - pch = kmalloc(sizeof(struct channel), GFP_KERNEL); + pch = kzalloc(sizeof(struct channel), GFP_KERNEL); if (pch == 0) return -ENOMEM; - memset(pch, 0, sizeof(struct channel)); pch->ppp = NULL; pch->chan = chan; chan->ppp = pch; @@ -2408,13 +2407,12 @@ ppp_create_interface(int unit, int *retp) int ret = -ENOMEM; int i; - ppp = kmalloc(sizeof(struct ppp), GFP_KERNEL); + ppp = kzalloc(sizeof(struct ppp), GFP_KERNEL); if (!ppp) goto out; dev = alloc_netdev(0, "", ppp_setup); if (!dev) goto out1; - memset(ppp, 0, sizeof(struct ppp)); ppp->mru = PPP_MRU; init_ppp_file(&ppp->file, INTERFACE); @@ -2454,11 +2452,16 @@ ppp_create_interface(int unit, int *retp) } atomic_inc(&ppp_unit_count); - cardmap_set(&all_ppp_units, unit, ppp); + ret = cardmap_set(&all_ppp_units, unit, ppp); + if (ret != 0) + goto out3; + mutex_unlock(&all_ppp_mutex); *retp = 0; return ppp; +out3: + atomic_dec(&ppp_unit_count); out2: mutex_unlock(&all_ppp_mutex); free_netdev(dev); @@ -2695,7 +2698,7 @@ static void *cardmap_get(struct cardmap *map, unsigned int nr) return NULL; } -static void cardmap_set(struct cardmap **pmap, unsigned int nr, void *ptr) +static int cardmap_set(struct cardmap **pmap, unsigned int nr, void *ptr) { struct cardmap *p; int i; @@ -2704,8 +2707,9 @@ static void cardmap_set(struct cardmap **pmap, unsigned int nr, void *ptr) if (p == NULL || (nr >> p->shift) >= CARDMAP_WIDTH) { do { /* need a new top level */ - struct cardmap *np = kmalloc(sizeof(*np), GFP_KERNEL); - memset(np, 0, sizeof(*np)); + struct cardmap *np = kzalloc(sizeof(*np), GFP_KERNEL); + if (!np) + goto enomem; np->ptr[0] = p; if (p != NULL) { np->shift = p->shift + CARDMAP_ORDER; @@ -2719,8 +2723,9 @@ static void cardmap_set(struct cardmap **pmap, unsigned int nr, void *ptr) while (p->shift > 0) { i = (nr >> p->shift) & CARDMAP_MASK; if (p->ptr[i] == NULL) { - struct cardmap *np = kmalloc(sizeof(*np), GFP_KERNEL); - memset(np, 0, sizeof(*np)); + struct cardmap *np = kzalloc(sizeof(*np), GFP_KERNEL); + if (!np) + goto enomem; np->shift = p->shift - CARDMAP_ORDER; np->parent = p; p->ptr[i] = np; @@ -2735,6 +2740,9 @@ static void cardmap_set(struct cardmap **pmap, unsigned int nr, void *ptr) set_bit(i, &p->inuse); else clear_bit(i, &p->inuse); + return 0; + enomem: + return -ENOMEM; } static unsigned int cardmap_find_first_free(struct cardmap *map) diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c index 6f97962dd06..eafabb253f0 100644 --- a/drivers/net/tg3.c +++ b/drivers/net/tg3.c @@ -68,8 +68,8 @@ #define DRV_MODULE_NAME "tg3" #define PFX DRV_MODULE_NAME ": " -#define DRV_MODULE_VERSION "3.64" -#define DRV_MODULE_RELDATE "July 31, 2006" +#define DRV_MODULE_VERSION "3.65" +#define DRV_MODULE_RELDATE "August 07, 2006" #define TG3_DEF_MAC_MODE 0 #define TG3_DEF_RX_MODE 0 @@ -123,9 +123,6 @@ TG3_RX_RCB_RING_SIZE(tp)) #define TG3_TX_RING_BYTES (sizeof(struct tg3_tx_buffer_desc) * \ TG3_TX_RING_SIZE) -#define TX_BUFFS_AVAIL(TP) \ - ((TP)->tx_pending - \ - (((TP)->tx_prod - (TP)->tx_cons) & (TG3_TX_RING_SIZE - 1))) #define NEXT_TX(N) (((N) + 1) & (TG3_TX_RING_SIZE - 1)) #define RX_PKT_BUF_SZ (1536 + tp->rx_offset + 64) @@ -2987,6 +2984,13 @@ static void tg3_tx_recover(struct tg3 *tp) spin_unlock(&tp->lock); } +static inline u32 tg3_tx_avail(struct tg3 *tp) +{ + smp_mb(); + return (tp->tx_pending - + ((tp->tx_prod - tp->tx_cons) & (TG3_TX_RING_SIZE - 1))); +} + /* Tigon3 never reports partial packet sends. So we do not * need special logic to handle SKBs that have not had all * of their frags sent yet, like SunGEM does. @@ -3038,12 +3042,20 @@ static void tg3_tx(struct tg3 *tp) tp->tx_cons = sw_idx; - if (unlikely(netif_queue_stopped(tp->dev))) { - spin_lock(&tp->tx_lock); + /* Need to make the tx_cons update visible to tg3_start_xmit() + * before checking for netif_queue_stopped(). Without the + * memory barrier, there is a small possibility that tg3_start_xmit() + * will miss it and cause the queue to be stopped forever. + */ + smp_mb(); + + if (unlikely(netif_queue_stopped(tp->dev) && + (tg3_tx_avail(tp) > TG3_TX_WAKEUP_THRESH))) { + netif_tx_lock(tp->dev); if (netif_queue_stopped(tp->dev) && - (TX_BUFFS_AVAIL(tp) > TG3_TX_WAKEUP_THRESH)) + (tg3_tx_avail(tp) > TG3_TX_WAKEUP_THRESH)) netif_wake_queue(tp->dev); - spin_unlock(&tp->tx_lock); + netif_tx_unlock(tp->dev); } } @@ -3101,7 +3113,6 @@ static int tg3_alloc_rx_skb(struct tg3 *tp, u32 opaque_key, if (skb == NULL) return -ENOMEM; - skb->dev = tp->dev; skb_reserve(skb, tp->rx_offset); mapping = pci_map_single(tp->pdev, skb->data, @@ -3274,7 +3285,6 @@ static int tg3_rx(struct tg3 *tp, int budget) if (copy_skb == NULL) goto drop_it_no_recycle; - copy_skb->dev = tp->dev; skb_reserve(copy_skb, 2); skb_put(copy_skb, len); pci_dma_sync_single_for_cpu(tp->pdev, dma_addr, len, PCI_DMA_FROMDEVICE); @@ -3797,7 +3807,7 @@ static int tg3_start_xmit(struct sk_buff *skb, struct net_device *dev) * interrupt. Furthermore, IRQ processing runs lockless so we have * no IRQ context deadlocks to worry about either. Rejoice! */ - if (unlikely(TX_BUFFS_AVAIL(tp) <= (skb_shinfo(skb)->nr_frags + 1))) { + if (unlikely(tg3_tx_avail(tp) <= (skb_shinfo(skb)->nr_frags + 1))) { if (!netif_queue_stopped(dev)) { netif_stop_queue(dev); @@ -3893,12 +3903,10 @@ static int tg3_start_xmit(struct sk_buff *skb, struct net_device *dev) tw32_tx_mbox((MAILBOX_SNDHOST_PROD_IDX_0 + TG3_64BIT_REG_LOW), entry); tp->tx_prod = entry; - if (unlikely(TX_BUFFS_AVAIL(tp) <= (MAX_SKB_FRAGS + 1))) { - spin_lock(&tp->tx_lock); + if (unlikely(tg3_tx_avail(tp) <= (MAX_SKB_FRAGS + 1))) { netif_stop_queue(dev); - if (TX_BUFFS_AVAIL(tp) > TG3_TX_WAKEUP_THRESH) + if (tg3_tx_avail(tp) > TG3_TX_WAKEUP_THRESH) netif_wake_queue(tp->dev); - spin_unlock(&tp->tx_lock); } out_unlock: @@ -3920,7 +3928,7 @@ static int tg3_tso_bug(struct tg3 *tp, struct sk_buff *skb) struct sk_buff *segs, *nskb; /* Estimate the number of fragments in the worst case */ - if (unlikely(TX_BUFFS_AVAIL(tp) <= (skb_shinfo(skb)->gso_segs * 3))) { + if (unlikely(tg3_tx_avail(tp) <= (skb_shinfo(skb)->gso_segs * 3))) { netif_stop_queue(tp->dev); return NETDEV_TX_BUSY; } @@ -3960,7 +3968,7 @@ static int tg3_start_xmit_dma_bug(struct sk_buff *skb, struct net_device *dev) * interrupt. Furthermore, IRQ processing runs lockless so we have * no IRQ context deadlocks to worry about either. Rejoice! */ - if (unlikely(TX_BUFFS_AVAIL(tp) <= (skb_shinfo(skb)->nr_frags + 1))) { + if (unlikely(tg3_tx_avail(tp) <= (skb_shinfo(skb)->nr_frags + 1))) { if (!netif_queue_stopped(dev)) { netif_stop_queue(dev); @@ -4110,12 +4118,10 @@ static int tg3_start_xmit_dma_bug(struct sk_buff *skb, struct net_device *dev) tw32_tx_mbox((MAILBOX_SNDHOST_PROD_IDX_0 + TG3_64BIT_REG_LOW), entry); tp->tx_prod = entry; - if (unlikely(TX_BUFFS_AVAIL(tp) <= (MAX_SKB_FRAGS + 1))) { - spin_lock(&tp->tx_lock); + if (unlikely(tg3_tx_avail(tp) <= (MAX_SKB_FRAGS + 1))) { netif_stop_queue(dev); - if (TX_BUFFS_AVAIL(tp) > TG3_TX_WAKEUP_THRESH) + if (tg3_tx_avail(tp) > TG3_TX_WAKEUP_THRESH) netif_wake_queue(tp->dev); - spin_unlock(&tp->tx_lock); } out_unlock: @@ -11474,7 +11480,6 @@ static int __devinit tg3_init_one(struct pci_dev *pdev, tp->grc_mode |= GRC_MODE_BSWAP_NONFRM_DATA; #endif spin_lock_init(&tp->lock); - spin_lock_init(&tp->tx_lock); spin_lock_init(&tp->indirect_lock); INIT_WORK(&tp->reset_task, tg3_reset_task, tp); diff --git a/drivers/net/tg3.h b/drivers/net/tg3.h index ba2c98711c8..3ecf356cfb0 100644 --- a/drivers/net/tg3.h +++ b/drivers/net/tg3.h @@ -2079,9 +2079,9 @@ struct tg3 { * lock: Held during reset, PHY access, timer, and when * updating tg3_flags and tg3_flags2. * - * tx_lock: Held during tg3_start_xmit and tg3_tx only - * when calling netif_[start|stop]_queue. - * tg3_start_xmit is protected by netif_tx_lock. + * netif_tx_lock: Held during tg3_start_xmit. tg3_tx holds + * netif_tx_lock when it needs to call + * netif_wake_queue. * * Both of these locks are to be held with BH safety. * @@ -2118,8 +2118,6 @@ struct tg3 { u32 tx_cons; u32 tx_pending; - spinlock_t tx_lock; - struct tg3_tx_buffer_desc *tx_ring; struct tx_ring_info *tx_buffers; dma_addr_t tx_desc_mapping; diff --git a/drivers/pci/hotplug/Kconfig b/drivers/pci/hotplug/Kconfig index 3fae77ffb2f..3c148eaf2f4 100644 --- a/drivers/pci/hotplug/Kconfig +++ b/drivers/pci/hotplug/Kconfig @@ -153,13 +153,6 @@ config HOTPLUG_PCI_SHPC_POLL_EVENT_MODE When in doubt, say N. -config HOTPLUG_PCI_SHPC_PHPRM_LEGACY - bool "For AMD SHPC only: Use $HRT for resource/configuration" - depends on HOTPLUG_PCI_SHPC && !ACPI - help - Say Y here for AMD SHPC. You have to select this option if you are - using this driver on platform with AMD SHPC. - config HOTPLUG_PCI_RPA tristate "RPA PCI Hotplug driver" depends on HOTPLUG_PCI && PPC_PSERIES && PPC64 && !HOTPLUG_PCI_FAKE diff --git a/drivers/pci/hotplug/pciehp.h b/drivers/pci/hotplug/pciehp.h index ce89f581586..eaea9d36a1b 100644 --- a/drivers/pci/hotplug/pciehp.h +++ b/drivers/pci/hotplug/pciehp.h @@ -279,6 +279,11 @@ struct hpc_ops { #ifdef CONFIG_ACPI +#include <acpi/acpi.h> +#include <acpi/acpi_bus.h> +#include <acpi/actypes.h> +#include <linux/pci-acpi.h> + #define pciehp_get_hp_hw_control_from_firmware(dev) \ pciehp_acpi_get_hp_hw_control_from_firmware(dev) static inline int pciehp_get_hp_params_from_firmware(struct pci_dev *dev, diff --git a/drivers/pci/hotplug/pciehp_hpc.c b/drivers/pci/hotplug/pciehp_hpc.c index 0d8fb6e607a..6ab3b6cd2b5 100644 --- a/drivers/pci/hotplug/pciehp_hpc.c +++ b/drivers/pci/hotplug/pciehp_hpc.c @@ -38,10 +38,6 @@ #include "../pci.h" #include "pciehp.h" -#include <acpi/acpi.h> -#include <acpi/acpi_bus.h> -#include <acpi/actypes.h> -#include <linux/pci-acpi.h> #ifdef DEBUG #define DBG_K_TRACE_ENTRY ((unsigned int)0x00000001) /* On function entry */ #define DBG_K_TRACE_EXIT ((unsigned int)0x00000002) /* On function exit */ diff --git a/drivers/s390/block/dasd.c b/drivers/s390/block/dasd.c index 4bf03fb67f8..d8e9b95f0a1 100644 --- a/drivers/s390/block/dasd.c +++ b/drivers/s390/block/dasd.c @@ -1730,8 +1730,8 @@ dasd_flush_request_queue(struct dasd_device * device) req = elv_next_request(device->request_queue); if (req == NULL) break; - dasd_end_request(req, 0); blkdev_dequeue_request(req); + dasd_end_request(req, 0); } spin_unlock_irq(&device->request_queue_lock); } diff --git a/drivers/s390/block/dasd_devmap.c b/drivers/s390/block/dasd_devmap.c index 7f6fdac7470..9d0c6e1a0e6 100644 --- a/drivers/s390/block/dasd_devmap.c +++ b/drivers/s390/block/dasd_devmap.c @@ -48,18 +48,20 @@ struct dasd_devmap { }; /* - * dasd_servermap is used to store the server_id of all storage servers - * accessed by DASD device driver. + * dasd_server_ssid_map contains a globally unique storage server subsystem ID. + * dasd_server_ssid_list contains the list of all subsystem IDs accessed by + * the DASD device driver. */ -struct dasd_servermap { +struct dasd_server_ssid_map { struct list_head list; struct server_id { char vendor[4]; char serial[15]; } sid; + __u16 ssid; }; -static struct list_head dasd_serverlist; +static struct list_head dasd_server_ssid_list; /* * Parameter parsing functions for dasd= parameter. The syntax is: @@ -89,7 +91,7 @@ static char *dasd[256]; module_param_array(dasd, charp, NULL, 0); /* - * Single spinlock to protect devmap structures and lists. + * Single spinlock to protect devmap and servermap structures and lists. */ static DEFINE_SPINLOCK(dasd_devmap_lock); @@ -264,8 +266,9 @@ dasd_parse_keyword( char *parsestring ) { if (dasd_page_cache) return residual_str; dasd_page_cache = - kmem_cache_create("dasd_page_cache", PAGE_SIZE, 0, - SLAB_CACHE_DMA, NULL, NULL ); + kmem_cache_create("dasd_page_cache", PAGE_SIZE, + PAGE_SIZE, SLAB_CACHE_DMA, + NULL, NULL ); if (!dasd_page_cache) MESSAGE(KERN_WARNING, "%s", "Failed to create slab, " "fixed buffer mode disabled."); @@ -859,39 +862,6 @@ static struct attribute_group dasd_attr_group = { }; /* - * Check if the related storage server is already contained in the - * dasd_serverlist. If server is not contained, create new entry. - * Return 0 if server was already in serverlist, - * 1 if the server was added successfully - * <0 in case of error. - */ -static int -dasd_add_server(struct dasd_uid *uid) -{ - struct dasd_servermap *new, *tmp; - - /* check if server is already contained */ - list_for_each_entry(tmp, &dasd_serverlist, list) - // normale cmp? - if (strncmp(tmp->sid.vendor, uid->vendor, - sizeof(tmp->sid.vendor)) == 0 - && strncmp(tmp->sid.serial, uid->serial, - sizeof(tmp->sid.serial)) == 0) - return 0; - - new = (struct dasd_servermap *) - kzalloc(sizeof(struct dasd_servermap), GFP_KERNEL); - if (!new) - return -ENOMEM; - - strncpy(new->sid.vendor, uid->vendor, sizeof(new->sid.vendor)); - strncpy(new->sid.serial, uid->serial, sizeof(new->sid.serial)); - list_add(&new->list, &dasd_serverlist); - return 1; -} - - -/* * Return copy of the device unique identifier. */ int @@ -910,6 +880,9 @@ dasd_get_uid(struct ccw_device *cdev, struct dasd_uid *uid) /* * Register the given device unique identifier into devmap struct. + * In addition check if the related storage server subsystem ID is already + * contained in the dasd_server_ssid_list. If subsystem ID is not contained, + * create new entry. * Return 0 if server was already in serverlist, * 1 if the server was added successful * <0 in case of error. @@ -918,16 +891,39 @@ int dasd_set_uid(struct ccw_device *cdev, struct dasd_uid *uid) { struct dasd_devmap *devmap; - int rc; + struct dasd_server_ssid_map *srv, *tmp; devmap = dasd_find_busid(cdev->dev.bus_id); if (IS_ERR(devmap)) return PTR_ERR(devmap); + + /* generate entry for server_ssid_map */ + srv = (struct dasd_server_ssid_map *) + kzalloc(sizeof(struct dasd_server_ssid_map), GFP_KERNEL); + if (!srv) + return -ENOMEM; + strncpy(srv->sid.vendor, uid->vendor, sizeof(srv->sid.vendor) - 1); + strncpy(srv->sid.serial, uid->serial, sizeof(srv->sid.serial) - 1); + srv->ssid = uid->ssid; + + /* server is already contained ? */ spin_lock(&dasd_devmap_lock); devmap->uid = *uid; - rc = dasd_add_server(uid); + list_for_each_entry(tmp, &dasd_server_ssid_list, list) { + if (!memcmp(&srv->sid, &tmp->sid, + sizeof(struct dasd_server_ssid_map))) { + kfree(srv); + srv = NULL; + break; + } + } + + /* add servermap to serverlist */ + if (srv) + list_add(&srv->list, &dasd_server_ssid_list); spin_unlock(&dasd_devmap_lock); - return rc; + + return (srv ? 1 : 0); } EXPORT_SYMBOL_GPL(dasd_set_uid); @@ -995,7 +991,7 @@ dasd_devmap_init(void) INIT_LIST_HEAD(&dasd_hashlists[i]); /* Initialize servermap structure. */ - INIT_LIST_HEAD(&dasd_serverlist); + INIT_LIST_HEAD(&dasd_server_ssid_list); return 0; } diff --git a/drivers/s390/block/dasd_eckd.c b/drivers/s390/block/dasd_eckd.c index 39c2281371b..957ed5db98e 100644 --- a/drivers/s390/block/dasd_eckd.c +++ b/drivers/s390/block/dasd_eckd.c @@ -468,11 +468,11 @@ dasd_eckd_generate_uid(struct dasd_device *device, struct dasd_uid *uid) return -ENODEV; memset(uid, 0, sizeof(struct dasd_uid)); - strncpy(uid->vendor, confdata->ned1.HDA_manufacturer, - sizeof(uid->vendor) - 1); + memcpy(uid->vendor, confdata->ned1.HDA_manufacturer, + sizeof(uid->vendor) - 1); EBCASC(uid->vendor, sizeof(uid->vendor) - 1); - strncpy(uid->serial, confdata->ned1.HDA_location, - sizeof(uid->serial) - 1); + memcpy(uid->serial, confdata->ned1.HDA_location, + sizeof(uid->serial) - 1); EBCASC(uid->serial, sizeof(uid->serial) - 1); uid->ssid = confdata->neq.subsystemID; if (confdata->ned2.sneq.flags == 0x40) { diff --git a/drivers/s390/block/xpram.c b/drivers/s390/block/xpram.c index 1140302ff11..ca7d51f7ecc 100644 --- a/drivers/s390/block/xpram.c +++ b/drivers/s390/block/xpram.c @@ -48,15 +48,6 @@ #define PRINT_ERR(x...) printk(KERN_ERR XPRAM_NAME " error:" x) -static struct sysdev_class xpram_sysclass = { - set_kset_name("xpram"), -}; - -static struct sys_device xpram_sys_device = { - .id = 0, - .cls = &xpram_sysclass, -}; - typedef struct { unsigned int size; /* size of xpram segment in pages */ unsigned int offset; /* start page of xpram segment */ @@ -451,8 +442,6 @@ static void __exit xpram_exit(void) } unregister_blkdev(XPRAM_MAJOR, XPRAM_NAME); blk_cleanup_queue(xpram_queue); - sysdev_unregister(&xpram_sys_device); - sysdev_class_unregister(&xpram_sysclass); } static int __init xpram_init(void) @@ -470,19 +459,7 @@ static int __init xpram_init(void) rc = xpram_setup_sizes(xpram_pages); if (rc) return rc; - rc = sysdev_class_register(&xpram_sysclass); - if (rc) - return rc; - - rc = sysdev_register(&xpram_sys_device); - if (rc) { - sysdev_class_unregister(&xpram_sysclass); - return rc; - } - rc = xpram_setup_blkdev(); - if (rc) - sysdev_unregister(&xpram_sys_device); - return rc; + return xpram_setup_blkdev(); } module_init(xpram_init); diff --git a/drivers/s390/char/tape_class.c b/drivers/s390/char/tape_class.c index 643b6d07856..56b87618b10 100644 --- a/drivers/s390/char/tape_class.c +++ b/drivers/s390/char/tape_class.c @@ -76,7 +76,7 @@ struct tape_class_device *register_tape_dev( device, "%s", tcd->device_name ); - rc = PTR_ERR(tcd->class_device); + rc = IS_ERR(tcd->class_device) ? PTR_ERR(tcd->class_device) : 0; if (rc) goto fail_with_cdev; rc = sysfs_create_link( diff --git a/drivers/s390/cio/device_fsm.c b/drivers/s390/cio/device_fsm.c index 7a39e0b0386..6d91c2eb205 100644 --- a/drivers/s390/cio/device_fsm.c +++ b/drivers/s390/cio/device_fsm.c @@ -772,6 +772,7 @@ ccw_device_online_verify(struct ccw_device *cdev, enum dev_event dev_event) stsch(sch->schid, &sch->schib); if (sch->schib.scsw.actl != 0 || + (sch->schib.scsw.stctl & SCSW_STCTL_STATUS_PEND) || (cdev->private->irb.scsw.stctl & SCSW_STCTL_STATUS_PEND)) { /* * No final status yet or final status not yet delivered diff --git a/drivers/s390/cio/device_ops.c b/drivers/s390/cio/device_ops.c index a60124264be..9e3de0bd59b 100644 --- a/drivers/s390/cio/device_ops.c +++ b/drivers/s390/cio/device_ops.c @@ -263,6 +263,9 @@ ccw_device_wake_up(struct ccw_device *cdev, unsigned long ip, struct irb *irb) /* Abuse intparm for error reporting. */ if (IS_ERR(irb)) cdev->private->intparm = -EIO; + else if (irb->scsw.cc == 1) + /* Retry for deferred condition code. */ + cdev->private->intparm = -EAGAIN; else if ((irb->scsw.dstat != (DEV_STAT_CHN_END|DEV_STAT_DEV_END)) || (irb->scsw.cstat != 0)) { diff --git a/drivers/scsi/arm/Kconfig b/drivers/scsi/arm/Kconfig index 06d7601cdf5..d006a8cb4a7 100644 --- a/drivers/scsi/arm/Kconfig +++ b/drivers/scsi/arm/Kconfig @@ -69,6 +69,7 @@ comment "The following drivers are not fully supported" config SCSI_CUMANA_1 tristate "CumanaSCSI I support (EXPERIMENTAL)" depends on ARCH_ACORN && EXPERIMENTAL && SCSI + select SCSI_SPI_ATTRS help This enables support for the Cumana SCSI I card. If you have an Acorn system with one of these, say Y. If unsure, say N. @@ -76,6 +77,7 @@ config SCSI_CUMANA_1 config SCSI_ECOSCSI tristate "EcoScsi support (EXPERIMENTAL)" depends on ARCH_ACORN && EXPERIMENTAL && (ARCH_ARC || ARCH_A5K) && SCSI + select SCSI_SPI_ATTRS help This enables support for the EcoSCSI card -- a small card that sits in the Econet socket. If you have an Acorn system with one of these, @@ -84,6 +86,7 @@ config SCSI_ECOSCSI config SCSI_OAK1 tristate "Oak SCSI support (EXPERIMENTAL)" depends on ARCH_ACORN && EXPERIMENTAL && SCSI + select SCSI_SPI_ATTRS help This enables support for the Oak SCSI card. If you have an Acorn system with one of these, say Y. If unsure, say N. diff --git a/drivers/scsi/arm/scsi.h b/drivers/scsi/arm/scsi.h index 6dd544a5eb5..8c2600ffc6a 100644 --- a/drivers/scsi/arm/scsi.h +++ b/drivers/scsi/arm/scsi.h @@ -74,7 +74,7 @@ static inline void init_SCp(Scsi_Cmnd *SCpnt) unsigned long len = 0; int buf; - SCpnt->SCp.buffer = (struct scatterlist *) SCpnt->buffer; + SCpnt->SCp.buffer = (struct scatterlist *) SCpnt->request_buffer; SCpnt->SCp.buffers_residual = SCpnt->use_sg - 1; SCpnt->SCp.ptr = (char *) (page_address(SCpnt->SCp.buffer->page) + diff --git a/drivers/scsi/ata_piix.c b/drivers/scsi/ata_piix.c index 19745a31072..5e8afc87698 100644 --- a/drivers/scsi/ata_piix.c +++ b/drivers/scsi/ata_piix.c @@ -567,8 +567,8 @@ static int piix_sata_prereset(struct ata_port *ap) present = 1; } - DPRINTK("ata%u: LEAVE, pcs=0x%x present_mask=0x%x\n", - ap->id, pcs, present_mask); + DPRINTK("ata%u: LEAVE, pcs=0x%x present=0x%x\n", + ap->id, pcs, present); if (!present) { ata_port_printk(ap, KERN_INFO, "SATA port has no device.\n"); @@ -828,6 +828,7 @@ static void __devinit piix_init_sata_map(struct pci_dev *pdev, case IDE: WARN_ON((i & 1) || map[i + 1] != IDE); pinfo[i / 2] = piix_port_info[ich5_pata]; + pinfo[i / 2].private_data = hpriv; i++; printk(" IDE IDE"); break; diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 386e5f21e19..16fc2dd8f2f 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -5185,28 +5185,6 @@ void ata_host_stop (struct ata_host_set *host_set) iounmap(host_set->mmio_base); } - -/** - * ata_host_remove - Unregister SCSI host structure with upper layers - * @ap: Port to unregister - * @do_unregister: 1 if we fully unregister, 0 to just stop the port - * - * LOCKING: - * Inherited from caller. - */ - -static void ata_host_remove(struct ata_port *ap, unsigned int do_unregister) -{ - struct Scsi_Host *sh = ap->host; - - DPRINTK("ENTER\n"); - - if (do_unregister) - scsi_remove_host(sh); - - ap->ops->port_stop(ap); -} - /** * ata_dev_init - Initialize an ata_device structure * @dev: Device structure to initialize @@ -5532,8 +5510,11 @@ int ata_device_add(const struct ata_probe_ent *ent) err_out: for (i = 0; i < count; i++) { - ata_host_remove(host_set->ports[i], 1); - scsi_host_put(host_set->ports[i]->host); + struct ata_port *ap = host_set->ports[i]; + if (ap) { + ap->ops->port_stop(ap); + scsi_host_put(ap->host); + } } err_free_ret: kfree(host_set); @@ -5558,7 +5539,7 @@ void ata_port_detach(struct ata_port *ap) int i; if (!ap->ops->error_handler) - return; + goto skip_eh; /* tell EH we're leaving & flush EH */ spin_lock_irqsave(ap->lock, flags); @@ -5594,6 +5575,7 @@ void ata_port_detach(struct ata_port *ap) cancel_delayed_work(&ap->hotplug_task); flush_workqueue(ata_aux_wq); + skip_eh: /* remove the associated SCSI host */ scsi_remove_host(ap->host); } @@ -5662,7 +5644,7 @@ int ata_scsi_release(struct Scsi_Host *host) DPRINTK("ENTER\n"); ap->ops->port_disable(ap); - ata_host_remove(ap, 0); + ap->ops->port_stop(ap); DPRINTK("EXIT\n"); return 1; diff --git a/drivers/scsi/libata-scsi.c b/drivers/scsi/libata-scsi.c index 7ced41ecde8..e92c31d698f 100644 --- a/drivers/scsi/libata-scsi.c +++ b/drivers/scsi/libata-scsi.c @@ -2353,6 +2353,19 @@ static void atapi_qc_complete(struct ata_queued_cmd *qc) ata_gen_ata_desc_sense(qc); } + /* SCSI EH automatically locks door if sdev->locked is + * set. Sometimes door lock request continues to + * fail, for example, when no media is present. This + * creates a loop - SCSI EH issues door lock which + * fails and gets invoked again to acquire sense data + * for the failed command. + * + * If door lock fails, always clear sdev->locked to + * avoid this infinite loop. + */ + if (qc->cdb[0] == ALLOW_MEDIUM_REMOVAL) + qc->dev->sdev->locked = 0; + qc->scsicmd->result = SAM_STAT_CHECK_CONDITION; qc->scsidone(cmd); ata_qc_free(qc); diff --git a/drivers/scsi/sata_sil24.c b/drivers/scsi/sata_sil24.c index 2e0f4a4076a..3f368c7d3ef 100644 --- a/drivers/scsi/sata_sil24.c +++ b/drivers/scsi/sata_sil24.c @@ -1106,7 +1106,6 @@ static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) probe_ent->irq = pdev->irq; probe_ent->irq_flags = IRQF_SHARED; - probe_ent->mmio_base = port_base; probe_ent->private_data = hpriv; hpriv->host_base = host_base; diff --git a/drivers/usb/host/ohci-au1xxx.c b/drivers/usb/host/ohci-au1xxx.c index 822914e2f43..f7a975d5db0 100644 --- a/drivers/usb/host/ohci-au1xxx.c +++ b/drivers/usb/host/ohci-au1xxx.c @@ -110,7 +110,6 @@ static void au1xxx_start_ohc(struct platform_device *dev) printk(KERN_DEBUG __FILE__ ": Clock to USB host has been enabled \n"); -#endif } static void au1xxx_stop_ohc(struct platform_device *dev) diff --git a/drivers/usb/input/appletouch.c b/drivers/usb/input/appletouch.c index 9e3f1390337..044faa07e29 100644 --- a/drivers/usb/input/appletouch.c +++ b/drivers/usb/input/appletouch.c @@ -597,9 +597,9 @@ static void atp_disconnect(struct usb_interface *iface) if (dev) { usb_kill_urb(dev->urb); input_unregister_device(dev->input); - usb_free_urb(dev->urb); usb_buffer_free(dev->udev, dev->datalen, dev->data, dev->urb->transfer_dma); + usb_free_urb(dev->urb); kfree(dev); } printk(KERN_INFO "input: appletouch disconnected\n"); diff --git a/drivers/usb/misc/usbtest.c b/drivers/usb/misc/usbtest.c index 786e1dbe88e..983e104dd45 100644 --- a/drivers/usb/misc/usbtest.c +++ b/drivers/usb/misc/usbtest.c @@ -1242,11 +1242,12 @@ done: static int ctrl_out (struct usbtest_dev *dev, unsigned count, unsigned length, unsigned vary) { - unsigned i, j, len, retval; + unsigned i, j, len; + int retval; u8 *buf; char *what = "?"; struct usb_device *udev; - + if (length < 1 || length > 0xffff || vary >= length) return -EINVAL; diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index a20da8528a5..15945e806f0 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -306,6 +306,8 @@ static struct ftdi_sio_quirk ftdi_HE_TIRA1_quirk = { static struct usb_device_id id_table_combined [] = { + { USB_DEVICE(FTDI_VID, FTDI_AMC232_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_CANUSB_PID) }, { USB_DEVICE(FTDI_VID, FTDI_ACTZWAVE_PID) }, { USB_DEVICE(FTDI_VID, FTDI_IRTRANS_PID) }, { USB_DEVICE(FTDI_VID, FTDI_IPLUS_PID) }, diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h index 9f7343a4542..8888cd80a49 100644 --- a/drivers/usb/serial/ftdi_sio.h +++ b/drivers/usb/serial/ftdi_sio.h @@ -32,6 +32,12 @@ #define FTDI_NF_RIC_PID 0x0001 /* Product Id */ +/* www.canusb.com Lawicel CANUSB device */ +#define FTDI_CANUSB_PID 0xFFA8 /* Product Id */ + +/* AlphaMicro Components AMC-232USB01 device */ +#define FTDI_AMC232_PID 0xFF00 /* Product Id */ + /* ACT Solutions HomePro ZWave interface (http://www.act-solutions.com/HomePro.htm) */ #define FTDI_ACTZWAVE_PID 0xF2D0 diff --git a/drivers/usb/serial/ipaq.c b/drivers/usb/serial/ipaq.c index 7e1bd5d6dfa..9840bade79f 100644 --- a/drivers/usb/serial/ipaq.c +++ b/drivers/usb/serial/ipaq.c @@ -251,6 +251,8 @@ static struct usb_device_id ipaq_id_table [] = { { USB_DEVICE(0x04C5, 0x1079) }, /* FUJITSU USB Sync */ { USB_DEVICE(0x04DA, 0x2500) }, /* Panasonic USB Sync */ { USB_DEVICE(0x04DD, 0x9102) }, /* SHARP WS003SH USB Modem */ + { USB_DEVICE(0x04DD, 0x9121) }, /* SHARP WS004SH USB Modem */ + { USB_DEVICE(0x04DD, 0x9123) }, /* SHARP WS007SH USB Modem */ { USB_DEVICE(0x04E8, 0x5F00) }, /* Samsung NEXiO USB Sync */ { USB_DEVICE(0x04E8, 0x5F01) }, /* Samsung NEXiO USB Sync */ { USB_DEVICE(0x04E8, 0x5F02) }, /* Samsung NEXiO USB Sync */ diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index 2793f9a912b..fd158e063c0 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -1240,6 +1240,16 @@ UNUSUAL_DEV( 0x0ed1, 0x7636, 0x0103, 0x0103, US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_IGNORE_RESIDUE | US_FL_GO_SLOW | US_FL_MAX_SECTORS_64), +/* David Kuehling <dvdkhlng@gmx.de>: + * for MP3-Player AVOX WSX-300ER (bought in Japan). Reports lots of SCSI + * errors when trying to write. + */ +UNUSUAL_DEV( 0x0f19, 0x0105, 0x0100, 0x0100, + "C-MEX", + "A-VOX", + US_SC_DEVICE, US_PR_DEVICE, NULL, + US_FL_IGNORE_RESIDUE ), + /* Reported by Michael Stattmann <michael@stattmann.com> */ UNUSUAL_DEV( 0x0fce, 0xd008, 0x0000, 0x0000, "Sony Ericsson", diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig index c40b9b8b1e7..702eb933cf8 100644 --- a/drivers/video/Kconfig +++ b/drivers/video/Kconfig @@ -554,7 +554,7 @@ config FB_VESA config FB_IMAC bool "Intel-based Macintosh Framebuffer Support" - depends on (FB = y) && X86 + depends on (FB = y) && X86 && EFI select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT diff --git a/drivers/video/imacfb.c b/drivers/video/imacfb.c index ff233b84dec..b485bece5fc 100644 --- a/drivers/video/imacfb.c +++ b/drivers/video/imacfb.c @@ -18,6 +18,8 @@ #include <linux/screen_info.h> #include <linux/slab.h> #include <linux/string.h> +#include <linux/dmi.h> +#include <linux/efi.h> #include <asm/io.h> @@ -28,7 +30,7 @@ typedef enum _MAC_TYPE { M_I20, M_MINI, M_MACBOOK, - M_NEW + M_UNKNOWN } MAC_TYPE; /* --------------------------------------------------------------------- */ @@ -52,10 +54,36 @@ static struct fb_fix_screeninfo imacfb_fix __initdata = { }; static int inverse; -static int model = M_NEW; +static int model = M_UNKNOWN; static int manual_height; static int manual_width; +static int set_system(struct dmi_system_id *id) +{ + printk(KERN_INFO "imacfb: %s detected - set system to %ld\n", + id->ident, (long)id->driver_data); + + model = (long)id->driver_data; + + return 0; +} + +static struct dmi_system_id __initdata dmi_system_table[] = { + { set_system, "iMac4,1", { + DMI_MATCH(DMI_BIOS_VENDOR,"Apple Computer, Inc."), + DMI_MATCH(DMI_BIOS_VERSION,"iMac4,1") }, (void*)M_I17}, + { set_system, "MacBookPro1,1", { + DMI_MATCH(DMI_BIOS_VENDOR,"Apple Computer, Inc."), + DMI_MATCH(DMI_BIOS_VERSION,"MacBookPro1,1") }, (void*)M_I17}, + { set_system, "MacBook1,1", { + DMI_MATCH(DMI_BIOS_VENDOR,"Apple Computer, Inc."), + DMI_MATCH(DMI_PRODUCT_NAME,"MacBook1,1")}, (void *)M_MACBOOK}, + { set_system, "Macmini1,1", { + DMI_MATCH(DMI_BIOS_VENDOR,"Apple Computer, Inc."), + DMI_MATCH(DMI_PRODUCT_NAME,"Macmini1,1")}, (void *)M_MINI}, + {}, +}; + #define DEFAULT_FB_MEM 1024*1024*16 /* --------------------------------------------------------------------- */ @@ -149,7 +177,6 @@ static int __init imacfb_probe(struct platform_device *dev) screen_info.lfb_linelength = 1472 * 4; screen_info.lfb_base = 0x80010000; break; - case M_NEW: case M_I20: screen_info.lfb_width = 1680; screen_info.lfb_height = 1050; @@ -207,6 +234,10 @@ static int __init imacfb_probe(struct platform_device *dev) size_remap = size_total; imacfb_fix.smem_len = size_remap; +#ifndef __i386__ + screen_info.imacpm_seg = 0; +#endif + if (!request_mem_region(imacfb_fix.smem_start, size_total, "imacfb")) { printk(KERN_WARNING "imacfb: cannot reserve video memory at 0x%lx\n", @@ -324,8 +355,16 @@ static int __init imacfb_init(void) int ret; char *option = NULL; - /* ignore error return of fb_get_options */ - fb_get_options("imacfb", &option); + if (!efi_enabled) + return -ENODEV; + if (!dmi_check_system(dmi_system_table)) + return -ENODEV; + if (model == M_UNKNOWN) + return -ENODEV; + + if (fb_get_options("imacfb", &option)) + return -ENODEV; + imacfb_setup(option); ret = platform_driver_register(&imacfb_driver); |