summaryrefslogtreecommitdiff
path: root/drivers
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2012-01-09 14:39:22 -0800
committerLinus Torvalds <torvalds@linux-foundation.org>2012-01-09 14:39:22 -0800
commit2ac9d7aaccbd598b5bd19ac40761b723bb675442 (patch)
tree09132a44e33798aaa5e80f10bf025b510015cab3 /drivers
parent5ede3ceb7b2c2843e153a1803edbdc8c56655950 (diff)
parentdcf7ec5ee62a78123057a1e286c88ca739717409 (diff)
downloadlinux-3.10-2ac9d7aaccbd598b5bd19ac40761b723bb675442.tar.gz
linux-3.10-2ac9d7aaccbd598b5bd19ac40761b723bb675442.tar.bz2
linux-3.10-2ac9d7aaccbd598b5bd19ac40761b723bb675442.zip
Merge tag 'drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Driver specific changes Again, a lot of platforms have changes in here: pxa, samsung, omap, at91, imx, ... * tag 'drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (54 commits) ARM: sa1100: clean up of the clock support ARM: pxa: add dummy clock for sa1100-rtc RTC: sa1100: support sa1100, pxa and mmp soc families RTC: sa1100: remove redundant code of setting alarm RTC: sa1100: Clean out ost register Input: zylonite-wm97xx - replace IRQ_GPIO() with gpio_to_irq() pcmcia: pxa: replace IRQ_GPIO() with gpio_to_irq() ARM: EXYNOS: Modified files for SPI consolidation work ARM: S5P64X0: Enable SDHCI support ARM: S5P64X0: Add lookup of sdhci-s3c clocks using generic names ARM: S5P64X0: Add HSMMC setup for host Controller ARM: EXYNOS: Add USB OHCI support to ORIGEN board USB: Add Samsung Exynos OHCI diver ARM: EXYNOS: Add USB OHCI support to SMDKV310 board ARM: EXYNOS: Add USB OHCI device net: macb: fix build break with !CONFIG_OF i2c: tegra: Support DVC controller in device tree i2c: tegra: Add __devinit/exit to probe/remove net/at91_ether: use gpio_is_valid for phy IRQ line ARM: at91/net: add macb ethernet controller in 9g45/9g20 DT ...
Diffstat (limited to 'drivers')
-rw-r--r--drivers/gpio/Kconfig6
-rw-r--r--drivers/gpio/Makefile2
-rw-r--r--drivers/gpio/gpio-pxa.c377
-rw-r--r--drivers/i2c/busses/i2c-tegra.c10
-rw-r--r--drivers/input/touchscreen/zylonite-wm97xx.c5
-rw-r--r--drivers/mfd/omap-usb-host.c755
-rw-r--r--drivers/mmc/host/omap_hsmmc.c26
-rw-r--r--drivers/net/ethernet/Makefile2
-rw-r--r--drivers/net/ethernet/cadence/Kconfig16
-rw-r--r--drivers/net/ethernet/cadence/at91_ether.c23
-rw-r--r--drivers/net/ethernet/cadence/macb.c269
-rw-r--r--drivers/net/ethernet/cadence/macb.h152
-rw-r--r--drivers/pcmcia/pxa2xx_cm_x255.c16
-rw-r--r--drivers/pcmcia/pxa2xx_cm_x270.c9
-rw-r--r--drivers/pcmcia/pxa2xx_e740.c11
-rw-r--r--drivers/pcmcia/pxa2xx_palmld.c2
-rw-r--r--drivers/pcmcia/pxa2xx_palmtc.c2
-rw-r--r--drivers/pcmcia/pxa2xx_stargate2.c6
-rw-r--r--drivers/pcmcia/pxa2xx_trizeps4.c5
-rw-r--r--drivers/pcmcia/pxa2xx_vpac270.c4
-rw-r--r--drivers/rtc/Kconfig2
-rw-r--r--drivers/rtc/rtc-sa1100.c300
-rw-r--r--drivers/usb/Kconfig1
-rw-r--r--drivers/usb/host/Kconfig6
-rw-r--r--drivers/usb/host/ehci-omap.c17
-rw-r--r--drivers/usb/host/ohci-exynos.c274
-rw-r--r--drivers/usb/host/ohci-hcd.c5
-rw-r--r--drivers/usb/host/ohci-omap3.c18
28 files changed, 1581 insertions, 740 deletions
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index 5099681cf50..e3380137b05 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -141,6 +141,12 @@ config GPIO_PL061
help
Say yes here to support the PrimeCell PL061 GPIO device
+config GPIO_PXA
+ bool "PXA GPIO support"
+ depends on ARCH_PXA || ARCH_MMP
+ help
+ Say yes here to support the PXA GPIO device
+
config GPIO_XILINX
bool "Xilinx GPIO support"
depends on PPC_OF || MICROBLAZE
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index 4e018d6a763..8ef9e9abe97 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -40,7 +40,7 @@ obj-$(CONFIG_GPIO_PCA953X) += gpio-pca953x.o
obj-$(CONFIG_GPIO_PCF857X) += gpio-pcf857x.o
obj-$(CONFIG_GPIO_PCH) += gpio-pch.o
obj-$(CONFIG_GPIO_PL061) += gpio-pl061.o
-obj-$(CONFIG_PLAT_PXA) += gpio-pxa.o
+obj-$(CONFIG_GPIO_PXA) += gpio-pxa.o
obj-$(CONFIG_GPIO_RDC321X) += gpio-rdc321x.o
obj-$(CONFIG_PLAT_SAMSUNG) += gpio-samsung.o
obj-$(CONFIG_ARCH_SA1100) += gpio-sa1100.o
diff --git a/drivers/gpio/gpio-pxa.c b/drivers/gpio/gpio-pxa.c
index ee137712f9d..b2d3ee1d183 100644
--- a/drivers/gpio/gpio-pxa.c
+++ b/drivers/gpio/gpio-pxa.c
@@ -11,14 +11,46 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
+#include <linux/clk.h>
+#include <linux/err.h>
#include <linux/gpio.h>
+#include <linux/gpio-pxa.h>
#include <linux/init.h>
#include <linux/irq.h>
#include <linux/io.h>
+#include <linux/platform_device.h>
#include <linux/syscore_ops.h>
#include <linux/slab.h>
-#include <mach/gpio-pxa.h>
+/*
+ * We handle the GPIOs by banks, each bank covers up to 32 GPIOs with
+ * one set of registers. The register offsets are organized below:
+ *
+ * GPLR GPDR GPSR GPCR GRER GFER GEDR
+ * BANK 0 - 0x0000 0x000C 0x0018 0x0024 0x0030 0x003C 0x0048
+ * BANK 1 - 0x0004 0x0010 0x001C 0x0028 0x0034 0x0040 0x004C
+ * BANK 2 - 0x0008 0x0014 0x0020 0x002C 0x0038 0x0044 0x0050
+ *
+ * BANK 3 - 0x0100 0x010C 0x0118 0x0124 0x0130 0x013C 0x0148
+ * BANK 4 - 0x0104 0x0110 0x011C 0x0128 0x0134 0x0140 0x014C
+ * BANK 5 - 0x0108 0x0114 0x0120 0x012C 0x0138 0x0144 0x0150
+ *
+ * NOTE:
+ * BANK 3 is only available on PXA27x and later processors.
+ * BANK 4 and 5 are only available on PXA935
+ */
+
+#define GPLR_OFFSET 0x00
+#define GPDR_OFFSET 0x0C
+#define GPSR_OFFSET 0x18
+#define GPCR_OFFSET 0x24
+#define GRER_OFFSET 0x30
+#define GFER_OFFSET 0x3C
+#define GEDR_OFFSET 0x48
+#define GAFR_OFFSET 0x54
+#define ED_MASK_OFFSET 0x9C /* GPIO edge detection for AP side */
+
+#define BANK_OFF(n) (((n) < 3) ? (n) << 2 : 0x100 + (((n) - 3) << 2))
int pxa_last_gpio;
@@ -39,8 +71,20 @@ struct pxa_gpio_chip {
#endif
};
+enum {
+ PXA25X_GPIO = 0,
+ PXA26X_GPIO,
+ PXA27X_GPIO,
+ PXA3XX_GPIO,
+ PXA93X_GPIO,
+ MMP_GPIO = 0x10,
+ MMP2_GPIO,
+};
+
static DEFINE_SPINLOCK(gpio_lock);
static struct pxa_gpio_chip *pxa_gpio_chips;
+static int gpio_type;
+static void __iomem *gpio_reg_base;
#define for_each_gpio_chip(i, c) \
for (i = 0, c = &pxa_gpio_chips[0]; i <= pxa_last_gpio; i += 32, c++)
@@ -55,6 +99,122 @@ static inline struct pxa_gpio_chip *gpio_to_pxachip(unsigned gpio)
return &pxa_gpio_chips[gpio_to_bank(gpio)];
}
+static inline int gpio_is_pxa_type(int type)
+{
+ return (type & MMP_GPIO) == 0;
+}
+
+static inline int gpio_is_mmp_type(int type)
+{
+ return (type & MMP_GPIO) != 0;
+}
+
+/* GPIO86/87/88/89 on PXA26x have their direction bits in PXA_GPDR(2 inverted,
+ * as well as their Alternate Function value being '1' for GPIO in GAFRx.
+ */
+static inline int __gpio_is_inverted(int gpio)
+{
+ if ((gpio_type == PXA26X_GPIO) && (gpio > 85))
+ return 1;
+ return 0;
+}
+
+/*
+ * On PXA25x and PXA27x, GAFRx and GPDRx together decide the alternate
+ * function of a GPIO, and GPDRx cannot be altered once configured. It
+ * is attributed as "occupied" here (I know this terminology isn't
+ * accurate, you are welcome to propose a better one :-)
+ */
+static inline int __gpio_is_occupied(unsigned gpio)
+{
+ struct pxa_gpio_chip *pxachip;
+ void __iomem *base;
+ unsigned long gafr = 0, gpdr = 0;
+ int ret, af = 0, dir = 0;
+
+ pxachip = gpio_to_pxachip(gpio);
+ base = gpio_chip_base(&pxachip->chip);
+ gpdr = readl_relaxed(base + GPDR_OFFSET);
+
+ switch (gpio_type) {
+ case PXA25X_GPIO:
+ case PXA26X_GPIO:
+ case PXA27X_GPIO:
+ gafr = readl_relaxed(base + GAFR_OFFSET);
+ af = (gafr >> ((gpio & 0xf) * 2)) & 0x3;
+ dir = gpdr & GPIO_bit(gpio);
+
+ if (__gpio_is_inverted(gpio))
+ ret = (af != 1) || (dir == 0);
+ else
+ ret = (af != 0) || (dir != 0);
+ break;
+ default:
+ ret = gpdr & GPIO_bit(gpio);
+ break;
+ }
+ return ret;
+}
+
+#ifdef CONFIG_ARCH_PXA
+static inline int __pxa_gpio_to_irq(int gpio)
+{
+ if (gpio_is_pxa_type(gpio_type))
+ return PXA_GPIO_TO_IRQ(gpio);
+ return -1;
+}
+
+static inline int __pxa_irq_to_gpio(int irq)
+{
+ if (gpio_is_pxa_type(gpio_type))
+ return irq - PXA_GPIO_TO_IRQ(0);
+ return -1;
+}
+#else
+static inline int __pxa_gpio_to_irq(int gpio) { return -1; }
+static inline int __pxa_irq_to_gpio(int irq) { return -1; }
+#endif
+
+#ifdef CONFIG_ARCH_MMP
+static inline int __mmp_gpio_to_irq(int gpio)
+{
+ if (gpio_is_mmp_type(gpio_type))
+ return MMP_GPIO_TO_IRQ(gpio);
+ return -1;
+}
+
+static inline int __mmp_irq_to_gpio(int irq)
+{
+ if (gpio_is_mmp_type(gpio_type))
+ return irq - MMP_GPIO_TO_IRQ(0);
+ return -1;
+}
+#else
+static inline int __mmp_gpio_to_irq(int gpio) { return -1; }
+static inline int __mmp_irq_to_gpio(int irq) { return -1; }
+#endif
+
+static int pxa_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
+{
+ int gpio, ret;
+
+ gpio = chip->base + offset;
+ ret = __pxa_gpio_to_irq(gpio);
+ if (ret >= 0)
+ return ret;
+ return __mmp_gpio_to_irq(gpio);
+}
+
+int pxa_irq_to_gpio(int irq)
+{
+ int ret;
+
+ ret = __pxa_irq_to_gpio(irq);
+ if (ret >= 0)
+ return ret;
+ return __mmp_irq_to_gpio(irq);
+}
+
static int pxa_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
{
void __iomem *base = gpio_chip_base(chip);
@@ -63,12 +223,12 @@ static int pxa_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
spin_lock_irqsave(&gpio_lock, flags);
- value = __raw_readl(base + GPDR_OFFSET);
+ value = readl_relaxed(base + GPDR_OFFSET);
if (__gpio_is_inverted(chip->base + offset))
value |= mask;
else
value &= ~mask;
- __raw_writel(value, base + GPDR_OFFSET);
+ writel_relaxed(value, base + GPDR_OFFSET);
spin_unlock_irqrestore(&gpio_lock, flags);
return 0;
@@ -81,16 +241,16 @@ static int pxa_gpio_direction_output(struct gpio_chip *chip,
uint32_t tmp, mask = 1 << offset;
unsigned long flags;
- __raw_writel(mask, base + (value ? GPSR_OFFSET : GPCR_OFFSET));
+ writel_relaxed(mask, base + (value ? GPSR_OFFSET : GPCR_OFFSET));
spin_lock_irqsave(&gpio_lock, flags);
- tmp = __raw_readl(base + GPDR_OFFSET);
+ tmp = readl_relaxed(base + GPDR_OFFSET);
if (__gpio_is_inverted(chip->base + offset))
tmp &= ~mask;
else
tmp |= mask;
- __raw_writel(tmp, base + GPDR_OFFSET);
+ writel_relaxed(tmp, base + GPDR_OFFSET);
spin_unlock_irqrestore(&gpio_lock, flags);
return 0;
@@ -98,16 +258,16 @@ static int pxa_gpio_direction_output(struct gpio_chip *chip,
static int pxa_gpio_get(struct gpio_chip *chip, unsigned offset)
{
- return __raw_readl(gpio_chip_base(chip) + GPLR_OFFSET) & (1 << offset);
+ return readl_relaxed(gpio_chip_base(chip) + GPLR_OFFSET) & (1 << offset);
}
static void pxa_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
{
- __raw_writel(1 << offset, gpio_chip_base(chip) +
+ writel_relaxed(1 << offset, gpio_chip_base(chip) +
(value ? GPSR_OFFSET : GPCR_OFFSET));
}
-static int __init pxa_init_gpio_chip(int gpio_end)
+static int __devinit pxa_init_gpio_chip(int gpio_end)
{
int i, gpio, nbanks = gpio_to_bank(gpio_end) + 1;
struct pxa_gpio_chip *chips;
@@ -122,7 +282,7 @@ static int __init pxa_init_gpio_chip(int gpio_end)
struct gpio_chip *c = &chips[i].chip;
sprintf(chips[i].label, "gpio-%d", i);
- chips[i].regbase = GPIO_BANK(i);
+ chips[i].regbase = gpio_reg_base + BANK_OFF(i);
c->base = gpio;
c->label = chips[i].label;
@@ -131,6 +291,7 @@ static int __init pxa_init_gpio_chip(int gpio_end)
c->direction_output = pxa_gpio_direction_output;
c->get = pxa_gpio_get;
c->set = pxa_gpio_set;
+ c->to_irq = pxa_gpio_to_irq;
/* number of GPIOs on last bank may be less than 32 */
c->ngpio = (gpio + 31 > gpio_end) ? (gpio_end - gpio + 1) : 32;
@@ -147,18 +308,18 @@ static inline void update_edge_detect(struct pxa_gpio_chip *c)
{
uint32_t grer, gfer;
- grer = __raw_readl(c->regbase + GRER_OFFSET) & ~c->irq_mask;
- gfer = __raw_readl(c->regbase + GFER_OFFSET) & ~c->irq_mask;
+ grer = readl_relaxed(c->regbase + GRER_OFFSET) & ~c->irq_mask;
+ gfer = readl_relaxed(c->regbase + GFER_OFFSET) & ~c->irq_mask;
grer |= c->irq_edge_rise & c->irq_mask;
gfer |= c->irq_edge_fall & c->irq_mask;
- __raw_writel(grer, c->regbase + GRER_OFFSET);
- __raw_writel(gfer, c->regbase + GFER_OFFSET);
+ writel_relaxed(grer, c->regbase + GRER_OFFSET);
+ writel_relaxed(gfer, c->regbase + GFER_OFFSET);
}
static int pxa_gpio_irq_type(struct irq_data *d, unsigned int type)
{
struct pxa_gpio_chip *c;
- int gpio = irq_to_gpio(d->irq);
+ int gpio = pxa_irq_to_gpio(d->irq);
unsigned long gpdr, mask = GPIO_bit(gpio);
c = gpio_to_pxachip(gpio);
@@ -176,12 +337,12 @@ static int pxa_gpio_irq_type(struct irq_data *d, unsigned int type)
type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING;
}
- gpdr = __raw_readl(c->regbase + GPDR_OFFSET);
+ gpdr = readl_relaxed(c->regbase + GPDR_OFFSET);
if (__gpio_is_inverted(gpio))
- __raw_writel(gpdr | mask, c->regbase + GPDR_OFFSET);
+ writel_relaxed(gpdr | mask, c->regbase + GPDR_OFFSET);
else
- __raw_writel(gpdr & ~mask, c->regbase + GPDR_OFFSET);
+ writel_relaxed(gpdr & ~mask, c->regbase + GPDR_OFFSET);
if (type & IRQ_TYPE_EDGE_RISING)
c->irq_edge_rise |= mask;
@@ -212,9 +373,9 @@ static void pxa_gpio_demux_handler(unsigned int irq, struct irq_desc *desc)
for_each_gpio_chip(gpio, c) {
gpio_base = c->chip.base;
- gedr = __raw_readl(c->regbase + GEDR_OFFSET);
+ gedr = readl_relaxed(c->regbase + GEDR_OFFSET);
gedr = gedr & c->irq_mask;
- __raw_writel(gedr, c->regbase + GEDR_OFFSET);
+ writel_relaxed(gedr, c->regbase + GEDR_OFFSET);
n = find_first_bit(&gedr, BITS_PER_LONG);
while (n < BITS_PER_LONG) {
@@ -229,29 +390,29 @@ static void pxa_gpio_demux_handler(unsigned int irq, struct irq_desc *desc)
static void pxa_ack_muxed_gpio(struct irq_data *d)
{
- int gpio = irq_to_gpio(d->irq);
+ int gpio = pxa_irq_to_gpio(d->irq);
struct pxa_gpio_chip *c = gpio_to_pxachip(gpio);
- __raw_writel(GPIO_bit(gpio), c->regbase + GEDR_OFFSET);
+ writel_relaxed(GPIO_bit(gpio), c->regbase + GEDR_OFFSET);
}
static void pxa_mask_muxed_gpio(struct irq_data *d)
{
- int gpio = irq_to_gpio(d->irq);
+ int gpio = pxa_irq_to_gpio(d->irq);
struct pxa_gpio_chip *c = gpio_to_pxachip(gpio);
uint32_t grer, gfer;
c->irq_mask &= ~GPIO_bit(gpio);
- grer = __raw_readl(c->regbase + GRER_OFFSET) & ~GPIO_bit(gpio);
- gfer = __raw_readl(c->regbase + GFER_OFFSET) & ~GPIO_bit(gpio);
- __raw_writel(grer, c->regbase + GRER_OFFSET);
- __raw_writel(gfer, c->regbase + GFER_OFFSET);
+ grer = readl_relaxed(c->regbase + GRER_OFFSET) & ~GPIO_bit(gpio);
+ gfer = readl_relaxed(c->regbase + GFER_OFFSET) & ~GPIO_bit(gpio);
+ writel_relaxed(grer, c->regbase + GRER_OFFSET);
+ writel_relaxed(gfer, c->regbase + GFER_OFFSET);
}
static void pxa_unmask_muxed_gpio(struct irq_data *d)
{
- int gpio = irq_to_gpio(d->irq);
+ int gpio = pxa_irq_to_gpio(d->irq);
struct pxa_gpio_chip *c = gpio_to_pxachip(gpio);
c->irq_mask |= GPIO_bit(gpio);
@@ -266,34 +427,143 @@ static struct irq_chip pxa_muxed_gpio_chip = {
.irq_set_type = pxa_gpio_irq_type,
};
-void __init pxa_init_gpio(int mux_irq, int start, int end, set_wake_t fn)
+static int pxa_gpio_nums(void)
{
- struct pxa_gpio_chip *c;
- int gpio, irq;
+ int count = 0;
+
+#ifdef CONFIG_ARCH_PXA
+ if (cpu_is_pxa25x()) {
+#ifdef CONFIG_CPU_PXA26x
+ count = 89;
+ gpio_type = PXA26X_GPIO;
+#elif defined(CONFIG_PXA25x)
+ count = 84;
+ gpio_type = PXA26X_GPIO;
+#endif /* CONFIG_CPU_PXA26x */
+ } else if (cpu_is_pxa27x()) {
+ count = 120;
+ gpio_type = PXA27X_GPIO;
+ } else if (cpu_is_pxa93x() || cpu_is_pxa95x()) {
+ count = 191;
+ gpio_type = PXA93X_GPIO;
+ } else if (cpu_is_pxa3xx()) {
+ count = 127;
+ gpio_type = PXA3XX_GPIO;
+ }
+#endif /* CONFIG_ARCH_PXA */
+
+#ifdef CONFIG_ARCH_MMP
+ if (cpu_is_pxa168() || cpu_is_pxa910()) {
+ count = 127;
+ gpio_type = MMP_GPIO;
+ } else if (cpu_is_mmp2()) {
+ count = 191;
+ gpio_type = MMP2_GPIO;
+ }
+#endif /* CONFIG_ARCH_MMP */
+ return count;
+}
- pxa_last_gpio = end;
+static int __devinit pxa_gpio_probe(struct platform_device *pdev)
+{
+ struct pxa_gpio_chip *c;
+ struct resource *res;
+ struct clk *clk;
+ int gpio, irq, ret;
+ int irq0 = 0, irq1 = 0, irq_mux, gpio_offset = 0;
+
+ pxa_last_gpio = pxa_gpio_nums();
+ if (!pxa_last_gpio)
+ return -EINVAL;
+
+ irq0 = platform_get_irq_byname(pdev, "gpio0");
+ irq1 = platform_get_irq_byname(pdev, "gpio1");
+ irq_mux = platform_get_irq_byname(pdev, "gpio_mux");
+ if ((irq0 > 0 && irq1 <= 0) || (irq0 <= 0 && irq1 > 0)
+ || (irq_mux <= 0))
+ return -EINVAL;
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res)
+ return -EINVAL;
+ gpio_reg_base = ioremap(res->start, resource_size(res));
+ if (!gpio_reg_base)
+ return -EINVAL;
+
+ if (irq0 > 0)
+ gpio_offset = 2;
+
+ clk = clk_get(&pdev->dev, NULL);
+ if (IS_ERR(clk)) {
+ dev_err(&pdev->dev, "Error %ld to get gpio clock\n",
+ PTR_ERR(clk));
+ iounmap(gpio_reg_base);
+ return PTR_ERR(clk);
+ }
+ ret = clk_prepare(clk);
+ if (ret) {
+ clk_put(clk);
+ iounmap(gpio_reg_base);
+ return ret;
+ }
+ ret = clk_enable(clk);
+ if (ret) {
+ clk_unprepare(clk);
+ clk_put(clk);
+ iounmap(gpio_reg_base);
+ return ret;
+ }
/* Initialize GPIO chips */
- pxa_init_gpio_chip(end);
+ pxa_init_gpio_chip(pxa_last_gpio);
/* clear all GPIO edge detects */
for_each_gpio_chip(gpio, c) {
- __raw_writel(0, c->regbase + GFER_OFFSET);
- __raw_writel(0, c->regbase + GRER_OFFSET);
- __raw_writel(~0,c->regbase + GEDR_OFFSET);
+ writel_relaxed(0, c->regbase + GFER_OFFSET);
+ writel_relaxed(0, c->regbase + GRER_OFFSET);
+ writel_relaxed(~0,c->regbase + GEDR_OFFSET);
+ /* unmask GPIO edge detect for AP side */
+ if (gpio_is_mmp_type(gpio_type))
+ writel_relaxed(~0, c->regbase + ED_MASK_OFFSET);
}
- for (irq = gpio_to_irq(start); irq <= gpio_to_irq(end); irq++) {
+#ifdef CONFIG_ARCH_PXA
+ irq = gpio_to_irq(0);
+ irq_set_chip_and_handler(irq, &pxa_muxed_gpio_chip,
+ handle_edge_irq);
+ set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
+ irq_set_chained_handler(IRQ_GPIO0, pxa_gpio_demux_handler);
+
+ irq = gpio_to_irq(1);
+ irq_set_chip_and_handler(irq, &pxa_muxed_gpio_chip,
+ handle_edge_irq);
+ set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
+ irq_set_chained_handler(IRQ_GPIO1, pxa_gpio_demux_handler);
+#endif
+
+ for (irq = gpio_to_irq(gpio_offset);
+ irq <= gpio_to_irq(pxa_last_gpio); irq++) {
irq_set_chip_and_handler(irq, &pxa_muxed_gpio_chip,
handle_edge_irq);
set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
}
- /* Install handler for GPIO>=2 edge detect interrupts */
- irq_set_chained_handler(mux_irq, pxa_gpio_demux_handler);
- pxa_muxed_gpio_chip.irq_set_wake = fn;
+ irq_set_chained_handler(irq_mux, pxa_gpio_demux_handler);
+ return 0;
}
+static struct platform_driver pxa_gpio_driver = {
+ .probe = pxa_gpio_probe,
+ .driver = {
+ .name = "pxa-gpio",
+ },
+};
+
+static int __init pxa_gpio_init(void)
+{
+ return platform_driver_register(&pxa_gpio_driver);
+}
+postcore_initcall(pxa_gpio_init);
+
#ifdef CONFIG_PM
static int pxa_gpio_suspend(void)
{
@@ -301,13 +571,13 @@ static int pxa_gpio_suspend(void)
int gpio;
for_each_gpio_chip(gpio, c) {
- c->saved_gplr = __raw_readl(c->regbase + GPLR_OFFSET);
- c->saved_gpdr = __raw_readl(c->regbase + GPDR_OFFSET);
- c->saved_grer = __raw_readl(c->regbase + GRER_OFFSET);
- c->saved_gfer = __raw_readl(c->regbase + GFER_OFFSET);
+ c->saved_gplr = readl_relaxed(c->regbase + GPLR_OFFSET);
+ c->saved_gpdr = readl_relaxed(c->regbase + GPDR_OFFSET);
+ c->saved_grer = readl_relaxed(c->regbase + GRER_OFFSET);
+ c->saved_gfer = readl_relaxed(c->regbase + GFER_OFFSET);
/* Clear GPIO transition detect bits */
- __raw_writel(0xffffffff, c->regbase + GEDR_OFFSET);
+ writel_relaxed(0xffffffff, c->regbase + GEDR_OFFSET);
}
return 0;
}
@@ -319,12 +589,12 @@ static void pxa_gpio_resume(void)
for_each_gpio_chip(gpio, c) {
/* restore level with set/clear */
- __raw_writel( c->saved_gplr, c->regbase + GPSR_OFFSET);
- __raw_writel(~c->saved_gplr, c->regbase + GPCR_OFFSET);
+ writel_relaxed( c->saved_gplr, c->regbase + GPSR_OFFSET);
+ writel_relaxed(~c->saved_gplr, c->regbase + GPCR_OFFSET);
- __raw_writel(c->saved_grer, c->regbase + GRER_OFFSET);
- __raw_writel(c->saved_gfer, c->regbase + GFER_OFFSET);
- __raw_writel(c->saved_gpdr, c->regbase + GPDR_OFFSET);
+ writel_relaxed(c->saved_grer, c->regbase + GRER_OFFSET);
+ writel_relaxed(c->saved_gfer, c->regbase + GFER_OFFSET);
+ writel_relaxed(c->saved_gpdr, c->regbase + GPDR_OFFSET);
}
}
#else
@@ -336,3 +606,10 @@ struct syscore_ops pxa_gpio_syscore_ops = {
.suspend = pxa_gpio_suspend,
.resume = pxa_gpio_resume,
};
+
+static int __init pxa_gpio_sysinit(void)
+{
+ register_syscore_ops(&pxa_gpio_syscore_ops);
+ return 0;
+}
+postcore_initcall(pxa_gpio_sysinit);
diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c
index 46b6500c547..6381604696d 100644
--- a/drivers/i2c/busses/i2c-tegra.c
+++ b/drivers/i2c/busses/i2c-tegra.c
@@ -558,7 +558,7 @@ static const struct i2c_algorithm tegra_i2c_algo = {
.functionality = tegra_i2c_func,
};
-static int tegra_i2c_probe(struct platform_device *pdev)
+static int __devinit tegra_i2c_probe(struct platform_device *pdev)
{
struct tegra_i2c_dev *i2c_dev;
struct tegra_i2c_platform_data *pdata = pdev->dev.platform_data;
@@ -636,7 +636,10 @@ static int tegra_i2c_probe(struct platform_device *pdev)
i2c_dev->bus_clk_rate = be32_to_cpup(prop);
}
- if (pdev->id == 3)
+ if (pdev->dev.of_node)
+ i2c_dev->is_dvc = of_device_is_compatible(pdev->dev.of_node,
+ "nvidia,tegra20-i2c-dvc");
+ else if (pdev->id == 3)
i2c_dev->is_dvc = 1;
init_completion(&i2c_dev->msg_complete);
@@ -690,7 +693,7 @@ err_iounmap:
return ret;
}
-static int tegra_i2c_remove(struct platform_device *pdev)
+static int __devexit tegra_i2c_remove(struct platform_device *pdev)
{
struct tegra_i2c_dev *i2c_dev = platform_get_drvdata(pdev);
i2c_del_adapter(&i2c_dev->adapter);
@@ -742,6 +745,7 @@ static int tegra_i2c_resume(struct platform_device *pdev)
/* Match table for of_platform binding */
static const struct of_device_id tegra_i2c_of_match[] __devinitconst = {
{ .compatible = "nvidia,tegra20-i2c", },
+ { .compatible = "nvidia,tegra20-i2c-dvc", },
{},
};
MODULE_DEVICE_TABLE(of, tegra_i2c_of_match);
diff --git a/drivers/input/touchscreen/zylonite-wm97xx.c b/drivers/input/touchscreen/zylonite-wm97xx.c
index f6328c0cded..0a707bbbbea 100644
--- a/drivers/input/touchscreen/zylonite-wm97xx.c
+++ b/drivers/input/touchscreen/zylonite-wm97xx.c
@@ -22,6 +22,7 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/delay.h>
+#include <linux/gpio.h>
#include <linux/irq.h>
#include <linux/interrupt.h>
#include <linux/io.h>
@@ -192,8 +193,8 @@ static int zylonite_wm97xx_probe(struct platform_device *pdev)
else
gpio_touch_irq = mfp_to_gpio(MFP_PIN_GPIO26);
- wm->pen_irq = IRQ_GPIO(gpio_touch_irq);
- irq_set_irq_type(IRQ_GPIO(gpio_touch_irq), IRQ_TYPE_EDGE_BOTH);
+ wm->pen_irq = gpio_to_irq(gpio_touch_irq);
+ irq_set_irq_type(wm->pen_irq, IRQ_TYPE_EDGE_BOTH);
wm97xx_config_gpio(wm, WM97XX_GPIO_13, WM97XX_GPIO_IN,
WM97XX_GPIO_POL_HIGH,
diff --git a/drivers/mfd/omap-usb-host.c b/drivers/mfd/omap-usb-host.c
index 86e14583a08..3f565ef3e14 100644
--- a/drivers/mfd/omap-usb-host.c
+++ b/drivers/mfd/omap-usb-host.c
@@ -27,8 +27,9 @@
#include <linux/spinlock.h>
#include <linux/gpio.h>
#include <plat/usb.h>
+#include <linux/pm_runtime.h>
-#define USBHS_DRIVER_NAME "usbhs-omap"
+#define USBHS_DRIVER_NAME "usbhs_omap"
#define OMAP_EHCI_DEVICE "ehci-omap"
#define OMAP_OHCI_DEVICE "ohci-omap3"
@@ -147,9 +148,6 @@
struct usbhs_hcd_omap {
- struct clk *usbhost_ick;
- struct clk *usbhost_hs_fck;
- struct clk *usbhost_fs_fck;
struct clk *xclk60mhsp1_ck;
struct clk *xclk60mhsp2_ck;
struct clk *utmi_p1_fck;
@@ -159,8 +157,7 @@ struct usbhs_hcd_omap {
struct clk *usbhost_p2_fck;
struct clk *usbtll_p2_fck;
struct clk *init_60m_fclk;
- struct clk *usbtll_fck;
- struct clk *usbtll_ick;
+ struct clk *ehci_logic_fck;
void __iomem *uhh_base;
void __iomem *tll_base;
@@ -169,7 +166,6 @@ struct usbhs_hcd_omap {
u32 usbhs_rev;
spinlock_t lock;
- int count;
};
/*-------------------------------------------------------------------------*/
@@ -319,269 +315,6 @@ err_end:
return ret;
}
-/**
- * usbhs_omap_probe - initialize TI-based HCDs
- *
- * Allocates basic resources for this USB host controller.
- */
-static int __devinit usbhs_omap_probe(struct platform_device *pdev)
-{
- struct device *dev = &pdev->dev;
- struct usbhs_omap_platform_data *pdata = dev->platform_data;
- struct usbhs_hcd_omap *omap;
- struct resource *res;
- int ret = 0;
- int i;
-
- if (!pdata) {
- dev_err(dev, "Missing platform data\n");
- ret = -ENOMEM;
- goto end_probe;
- }
-
- omap = kzalloc(sizeof(*omap), GFP_KERNEL);
- if (!omap) {
- dev_err(dev, "Memory allocation failed\n");
- ret = -ENOMEM;
- goto end_probe;
- }
-
- spin_lock_init(&omap->lock);
-
- for (i = 0; i < OMAP3_HS_USB_PORTS; i++)
- omap->platdata.port_mode[i] = pdata->port_mode[i];
-
- omap->platdata.ehci_data = pdata->ehci_data;
- omap->platdata.ohci_data = pdata->ohci_data;
-
- omap->usbhost_ick = clk_get(dev, "usbhost_ick");
- if (IS_ERR(omap->usbhost_ick)) {
- ret = PTR_ERR(omap->usbhost_ick);
- dev_err(dev, "usbhost_ick failed error:%d\n", ret);
- goto err_end;
- }
-
- omap->usbhost_hs_fck = clk_get(dev, "hs_fck");
- if (IS_ERR(omap->usbhost_hs_fck)) {
- ret = PTR_ERR(omap->usbhost_hs_fck);
- dev_err(dev, "usbhost_hs_fck failed error:%d\n", ret);
- goto err_usbhost_ick;
- }
-
- omap->usbhost_fs_fck = clk_get(dev, "fs_fck");
- if (IS_ERR(omap->usbhost_fs_fck)) {
- ret = PTR_ERR(omap->usbhost_fs_fck);
- dev_err(dev, "usbhost_fs_fck failed error:%d\n", ret);
- goto err_usbhost_hs_fck;
- }
-
- omap->usbtll_fck = clk_get(dev, "usbtll_fck");
- if (IS_ERR(omap->usbtll_fck)) {
- ret = PTR_ERR(omap->usbtll_fck);
- dev_err(dev, "usbtll_fck failed error:%d\n", ret);
- goto err_usbhost_fs_fck;
- }
-
- omap->usbtll_ick = clk_get(dev, "usbtll_ick");
- if (IS_ERR(omap->usbtll_ick)) {
- ret = PTR_ERR(omap->usbtll_ick);
- dev_err(dev, "usbtll_ick failed error:%d\n", ret);
- goto err_usbtll_fck;
- }
-
- omap->utmi_p1_fck = clk_get(dev, "utmi_p1_gfclk");
- if (IS_ERR(omap->utmi_p1_fck)) {
- ret = PTR_ERR(omap->utmi_p1_fck);
- dev_err(dev, "utmi_p1_gfclk failed error:%d\n", ret);
- goto err_usbtll_ick;
- }
-
- omap->xclk60mhsp1_ck = clk_get(dev, "xclk60mhsp1_ck");
- if (IS_ERR(omap->xclk60mhsp1_ck)) {
- ret = PTR_ERR(omap->xclk60mhsp1_ck);
- dev_err(dev, "xclk60mhsp1_ck failed error:%d\n", ret);
- goto err_utmi_p1_fck;
- }
-
- omap->utmi_p2_fck = clk_get(dev, "utmi_p2_gfclk");
- if (IS_ERR(omap->utmi_p2_fck)) {
- ret = PTR_ERR(omap->utmi_p2_fck);
- dev_err(dev, "utmi_p2_gfclk failed error:%d\n", ret);
- goto err_xclk60mhsp1_ck;
- }
-
- omap->xclk60mhsp2_ck = clk_get(dev, "xclk60mhsp2_ck");
- if (IS_ERR(omap->xclk60mhsp2_ck)) {
- ret = PTR_ERR(omap->xclk60mhsp2_ck);
- dev_err(dev, "xclk60mhsp2_ck failed error:%d\n", ret);
- goto err_utmi_p2_fck;
- }
-
- omap->usbhost_p1_fck = clk_get(dev, "usb_host_hs_utmi_p1_clk");
- if (IS_ERR(omap->usbhost_p1_fck)) {
- ret = PTR_ERR(omap->usbhost_p1_fck);
- dev_err(dev, "usbhost_p1_fck failed error:%d\n", ret);
- goto err_xclk60mhsp2_ck;
- }
-
- omap->usbtll_p1_fck = clk_get(dev, "usb_tll_hs_usb_ch0_clk");
- if (IS_ERR(omap->usbtll_p1_fck)) {
- ret = PTR_ERR(omap->usbtll_p1_fck);
- dev_err(dev, "usbtll_p1_fck failed error:%d\n", ret);
- goto err_usbhost_p1_fck;
- }
-
- omap->usbhost_p2_fck = clk_get(dev, "usb_host_hs_utmi_p2_clk");
- if (IS_ERR(omap->usbhost_p2_fck)) {
- ret = PTR_ERR(omap->usbhost_p2_fck);
- dev_err(dev, "usbhost_p2_fck failed error:%d\n", ret);
- goto err_usbtll_p1_fck;
- }
-
- omap->usbtll_p2_fck = clk_get(dev, "usb_tll_hs_usb_ch1_clk");
- if (IS_ERR(omap->usbtll_p2_fck)) {
- ret = PTR_ERR(omap->usbtll_p2_fck);
- dev_err(dev, "usbtll_p2_fck failed error:%d\n", ret);
- goto err_usbhost_p2_fck;
- }
-
- omap->init_60m_fclk = clk_get(dev, "init_60m_fclk");
- if (IS_ERR(omap->init_60m_fclk)) {
- ret = PTR_ERR(omap->init_60m_fclk);
- dev_err(dev, "init_60m_fclk failed error:%d\n", ret);
- goto err_usbtll_p2_fck;
- }
-
- res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "uhh");
- if (!res) {
- dev_err(dev, "UHH EHCI get resource failed\n");
- ret = -ENODEV;
- goto err_init_60m_fclk;
- }
-
- omap->uhh_base = ioremap(res->start, resource_size(res));
- if (!omap->uhh_base) {
- dev_err(dev, "UHH ioremap failed\n");
- ret = -ENOMEM;
- goto err_init_60m_fclk;
- }
-
- res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "tll");
- if (!res) {
- dev_err(dev, "UHH EHCI get resource failed\n");
- ret = -ENODEV;
- goto err_tll;
- }
-
- omap->tll_base = ioremap(res->start, resource_size(res));
- if (!omap->tll_base) {
- dev_err(dev, "TLL ioremap failed\n");
- ret = -ENOMEM;
- goto err_tll;
- }
-
- platform_set_drvdata(pdev, omap);
-
- ret = omap_usbhs_alloc_children(pdev);
- if (ret) {
- dev_err(dev, "omap_usbhs_alloc_children failed\n");
- goto err_alloc;
- }
-
- goto end_probe;
-
-err_alloc:
- iounmap(omap->tll_base);
-
-err_tll:
- iounmap(omap->uhh_base);
-
-err_init_60m_fclk:
- clk_put(omap->init_60m_fclk);
-
-err_usbtll_p2_fck:
- clk_put(omap->usbtll_p2_fck);
-
-err_usbhost_p2_fck:
- clk_put(omap->usbhost_p2_fck);
-
-err_usbtll_p1_fck:
- clk_put(omap->usbtll_p1_fck);
-
-err_usbhost_p1_fck:
- clk_put(omap->usbhost_p1_fck);
-
-err_xclk60mhsp2_ck:
- clk_put(omap->xclk60mhsp2_ck);
-
-err_utmi_p2_fck:
- clk_put(omap->utmi_p2_fck);
-
-err_xclk60mhsp1_ck:
- clk_put(omap->xclk60mhsp1_ck);
-
-err_utmi_p1_fck:
- clk_put(omap->utmi_p1_fck);
-
-err_usbtll_ick:
- clk_put(omap->usbtll_ick);
-
-err_usbtll_fck:
- clk_put(omap->usbtll_fck);
-
-err_usbhost_fs_fck:
- clk_put(omap->usbhost_fs_fck);
-
-err_usbhost_hs_fck:
- clk_put(omap->usbhost_hs_fck);
-
-err_usbhost_ick:
- clk_put(omap->usbhost_ick);
-
-err_end:
- kfree(omap);
-
-end_probe:
- return ret;
-}
-
-/**
- * usbhs_omap_remove - shutdown processing for UHH & TLL HCDs
- * @pdev: USB Host Controller being removed
- *
- * Reverses the effect of usbhs_omap_probe().
- */
-static int __devexit usbhs_omap_remove(struct platform_device *pdev)
-{
- struct usbhs_hcd_omap *omap = platform_get_drvdata(pdev);
-
- if (omap->count != 0) {
- dev_err(&pdev->dev,
- "Either EHCI or OHCI is still using usbhs core\n");
- return -EBUSY;
- }
-
- iounmap(omap->tll_base);
- iounmap(omap->uhh_base);
- clk_put(omap->init_60m_fclk);
- clk_put(omap->usbtll_p2_fck);
- clk_put(omap->usbhost_p2_fck);
- clk_put(omap->usbtll_p1_fck);
- clk_put(omap->usbhost_p1_fck);
- clk_put(omap->xclk60mhsp2_ck);
- clk_put(omap->utmi_p2_fck);
- clk_put(omap->xclk60mhsp1_ck);
- clk_put(omap->utmi_p1_fck);
- clk_put(omap->usbtll_ick);
- clk_put(omap->usbtll_fck);
- clk_put(omap->usbhost_fs_fck);
- clk_put(omap->usbhost_hs_fck);
- clk_put(omap->usbhost_ick);
- kfree(omap);
-
- return 0;
-}
-
static bool is_ohci_port(enum usbhs_omap_port_mode pmode)
{
switch (pmode) {
@@ -689,30 +422,85 @@ static void usbhs_omap_tll_init(struct device *dev, u8 tll_channel_count)
}
}
-static int usbhs_enable(struct device *dev)
+static int usbhs_runtime_resume(struct device *dev)
{
struct usbhs_hcd_omap *omap = dev_get_drvdata(dev);
struct usbhs_omap_platform_data *pdata = &omap->platdata;
- unsigned long flags = 0;
- int ret = 0;
- unsigned long timeout;
- unsigned reg;
+ unsigned long flags;
+
+ dev_dbg(dev, "usbhs_runtime_resume\n");
- dev_dbg(dev, "starting TI HSUSB Controller\n");
if (!pdata) {
dev_dbg(dev, "missing platform_data\n");
return -ENODEV;
}
spin_lock_irqsave(&omap->lock, flags);
- if (omap->count > 0)
- goto end_count;
- clk_enable(omap->usbhost_ick);
- clk_enable(omap->usbhost_hs_fck);
- clk_enable(omap->usbhost_fs_fck);
- clk_enable(omap->usbtll_fck);
- clk_enable(omap->usbtll_ick);
+ if (omap->ehci_logic_fck && !IS_ERR(omap->ehci_logic_fck))
+ clk_enable(omap->ehci_logic_fck);
+
+ if (is_ehci_tll_mode(pdata->port_mode[0])) {
+ clk_enable(omap->usbhost_p1_fck);
+ clk_enable(omap->usbtll_p1_fck);
+ }
+ if (is_ehci_tll_mode(pdata->port_mode[1])) {
+ clk_enable(omap->usbhost_p2_fck);
+ clk_enable(omap->usbtll_p2_fck);
+ }
+ clk_enable(omap->utmi_p1_fck);
+ clk_enable(omap->utmi_p2_fck);
+
+ spin_unlock_irqrestore(&omap->lock, flags);
+
+ return 0;
+}
+
+static int usbhs_runtime_suspend(struct device *dev)
+{
+ struct usbhs_hcd_omap *omap = dev_get_drvdata(dev);
+ struct usbhs_omap_platform_data *pdata = &omap->platdata;
+ unsigned long flags;
+
+ dev_dbg(dev, "usbhs_runtime_suspend\n");
+
+ if (!pdata) {
+ dev_dbg(dev, "missing platform_data\n");
+ return -ENODEV;
+ }
+
+ spin_lock_irqsave(&omap->lock, flags);
+
+ if (is_ehci_tll_mode(pdata->port_mode[0])) {
+ clk_disable(omap->usbhost_p1_fck);
+ clk_disable(omap->usbtll_p1_fck);
+ }
+ if (is_ehci_tll_mode(pdata->port_mode[1])) {
+ clk_disable(omap->usbhost_p2_fck);
+ clk_disable(omap->usbtll_p2_fck);
+ }
+ clk_disable(omap->utmi_p2_fck);
+ clk_disable(omap->utmi_p1_fck);
+
+ if (omap->ehci_logic_fck && !IS_ERR(omap->ehci_logic_fck))
+ clk_disable(omap->ehci_logic_fck);
+
+ spin_unlock_irqrestore(&omap->lock, flags);
+
+ return 0;
+}
+
+static void omap_usbhs_init(struct device *dev)
+{
+ struct usbhs_hcd_omap *omap = dev_get_drvdata(dev);
+ struct usbhs_omap_platform_data *pdata = &omap->platdata;
+ unsigned long flags;
+ unsigned reg;
+
+ dev_dbg(dev, "starting TI HSUSB Controller\n");
+
+ pm_runtime_get_sync(dev);
+ spin_lock_irqsave(&omap->lock, flags);
if (pdata->ehci_data->phy_reset) {
if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[0])) {
@@ -736,50 +524,6 @@ static int usbhs_enable(struct device *dev)
omap->usbhs_rev = usbhs_read(omap->uhh_base, OMAP_UHH_REVISION);
dev_dbg(dev, "OMAP UHH_REVISION 0x%x\n", omap->usbhs_rev);
- /* perform TLL soft reset, and wait until reset is complete */
- usbhs_write(omap->tll_base, OMAP_USBTLL_SYSCONFIG,
- OMAP_USBTLL_SYSCONFIG_SOFTRESET);
-
- /* Wait for TLL reset to complete */
- timeout = jiffies + msecs_to_jiffies(1000);
- while (!(usbhs_read(omap->tll_base, OMAP_USBTLL_SYSSTATUS)
- & OMAP_USBTLL_SYSSTATUS_RESETDONE)) {
- cpu_relax();
-
- if (time_after(jiffies, timeout)) {
- dev_dbg(dev, "operation timed out\n");
- ret = -EINVAL;
- goto err_tll;
- }
- }
-
- dev_dbg(dev, "TLL RESET DONE\n");
-
- /* (1<<3) = no idle mode only for initial debugging */
- usbhs_write(omap->tll_base, OMAP_USBTLL_SYSCONFIG,
- OMAP_USBTLL_SYSCONFIG_ENAWAKEUP |
- OMAP_USBTLL_SYSCONFIG_SIDLEMODE |
- OMAP_USBTLL_SYSCONFIG_AUTOIDLE);
-
- /* Put UHH in NoIdle/NoStandby mode */
- reg = usbhs_read(omap->uhh_base, OMAP_UHH_SYSCONFIG);
- if (is_omap_usbhs_rev1(omap)) {
- reg |= (OMAP_UHH_SYSCONFIG_ENAWAKEUP
- | OMAP_UHH_SYSCONFIG_SIDLEMODE
- | OMAP_UHH_SYSCONFIG_CACTIVITY
- | OMAP_UHH_SYSCONFIG_MIDLEMODE);
- reg &= ~OMAP_UHH_SYSCONFIG_AUTOIDLE;
-
-
- } else if (is_omap_usbhs_rev2(omap)) {
- reg &= ~OMAP4_UHH_SYSCONFIG_IDLEMODE_CLEAR;
- reg |= OMAP4_UHH_SYSCONFIG_NOIDLE;
- reg &= ~OMAP4_UHH_SYSCONFIG_STDBYMODE_CLEAR;
- reg |= OMAP4_UHH_SYSCONFIG_NOSTDBY;
- }
-
- usbhs_write(omap->uhh_base, OMAP_UHH_SYSCONFIG, reg);
-
reg = usbhs_read(omap->uhh_base, OMAP_UHH_HOSTCONFIG);
/* setup ULPI bypass and burst configurations */
reg |= (OMAP_UHH_HOSTCONFIG_INCR4_BURST_EN
@@ -825,49 +569,6 @@ static int usbhs_enable(struct device *dev)
reg &= ~OMAP4_P1_MODE_CLEAR;
reg &= ~OMAP4_P2_MODE_CLEAR;
- if (is_ehci_phy_mode(pdata->port_mode[0])) {
- ret = clk_set_parent(omap->utmi_p1_fck,
- omap->xclk60mhsp1_ck);
- if (ret != 0) {
- dev_err(dev, "xclk60mhsp1_ck set parent"
- "failed error:%d\n", ret);
- goto err_tll;
- }
- } else if (is_ehci_tll_mode(pdata->port_mode[0])) {
- ret = clk_set_parent(omap->utmi_p1_fck,
- omap->init_60m_fclk);
- if (ret != 0) {
- dev_err(dev, "init_60m_fclk set parent"
- "failed error:%d\n", ret);
- goto err_tll;
- }
- clk_enable(omap->usbhost_p1_fck);
- clk_enable(omap->usbtll_p1_fck);
- }
-
- if (is_ehci_phy_mode(pdata->port_mode[1])) {
- ret = clk_set_parent(omap->utmi_p2_fck,
- omap->xclk60mhsp2_ck);
- if (ret != 0) {
- dev_err(dev, "xclk60mhsp1_ck set parent"
- "failed error:%d\n", ret);
- goto err_tll;
- }
- } else if (is_ehci_tll_mode(pdata->port_mode[1])) {
- ret = clk_set_parent(omap->utmi_p2_fck,
- omap->init_60m_fclk);
- if (ret != 0) {
- dev_err(dev, "init_60m_fclk set parent"
- "failed error:%d\n", ret);
- goto err_tll;
- }
- clk_enable(omap->usbhost_p2_fck);
- clk_enable(omap->usbtll_p2_fck);
- }
-
- clk_enable(omap->utmi_p1_fck);
- clk_enable(omap->utmi_p2_fck);
-
if (is_ehci_tll_mode(pdata->port_mode[0]) ||
(is_ohci_port(pdata->port_mode[0])))
reg |= OMAP4_P1_MODE_TLL;
@@ -913,12 +614,15 @@ static int usbhs_enable(struct device *dev)
(pdata->ehci_data->reset_gpio_port[1], 1);
}
-end_count:
- omap->count++;
spin_unlock_irqrestore(&omap->lock, flags);
- return 0;
+ pm_runtime_put_sync(dev);
+}
+
+static void omap_usbhs_deinit(struct device *dev)
+{
+ struct usbhs_hcd_omap *omap = dev_get_drvdata(dev);
+ struct usbhs_omap_platform_data *pdata = &omap->platdata;
-err_tll:
if (pdata->ehci_data->phy_reset) {
if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[0]))
gpio_free(pdata->ehci_data->reset_gpio_port[0]);
@@ -926,123 +630,272 @@ err_tll:
if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[1]))
gpio_free(pdata->ehci_data->reset_gpio_port[1]);
}
-
- clk_disable(omap->usbtll_ick);
- clk_disable(omap->usbtll_fck);
- clk_disable(omap->usbhost_fs_fck);
- clk_disable(omap->usbhost_hs_fck);
- clk_disable(omap->usbhost_ick);
- spin_unlock_irqrestore(&omap->lock, flags);
- return ret;
}
-static void usbhs_disable(struct device *dev)
+
+/**
+ * usbhs_omap_probe - initialize TI-based HCDs
+ *
+ * Allocates basic resources for this USB host controller.
+ */
+static int __devinit usbhs_omap_probe(struct platform_device *pdev)
{
- struct usbhs_hcd_omap *omap = dev_get_drvdata(dev);
- struct usbhs_omap_platform_data *pdata = &omap->platdata;
- unsigned long flags = 0;
- unsigned long timeout;
+ struct device *dev = &pdev->dev;
+ struct usbhs_omap_platform_data *pdata = dev->platform_data;
+ struct usbhs_hcd_omap *omap;
+ struct resource *res;
+ int ret = 0;
+ int i;
- dev_dbg(dev, "stopping TI HSUSB Controller\n");
+ if (!pdata) {
+ dev_err(dev, "Missing platform data\n");
+ ret = -ENOMEM;
+ goto end_probe;
+ }
- spin_lock_irqsave(&omap->lock, flags);
+ omap = kzalloc(sizeof(*omap), GFP_KERNEL);
+ if (!omap) {
+ dev_err(dev, "Memory allocation failed\n");
+ ret = -ENOMEM;
+ goto end_probe;
+ }
- if (omap->count == 0)
- goto end_disble;
+ spin_lock_init(&omap->lock);
- omap->count--;
+ for (i = 0; i < OMAP3_HS_USB_PORTS; i++)
+ omap->platdata.port_mode[i] = pdata->port_mode[i];
+
+ omap->platdata.ehci_data = pdata->ehci_data;
+ omap->platdata.ohci_data = pdata->ohci_data;
- if (omap->count != 0)
- goto end_disble;
+ pm_runtime_enable(dev);
- /* Reset OMAP modules for insmod/rmmod to work */
- usbhs_write(omap->uhh_base, OMAP_UHH_SYSCONFIG,
- is_omap_usbhs_rev2(omap) ?
- OMAP4_UHH_SYSCONFIG_SOFTRESET :
- OMAP_UHH_SYSCONFIG_SOFTRESET);
- timeout = jiffies + msecs_to_jiffies(100);
- while (!(usbhs_read(omap->uhh_base, OMAP_UHH_SYSSTATUS)
- & (1 << 0))) {
- cpu_relax();
+ for (i = 0; i < OMAP3_HS_USB_PORTS; i++)
+ if (is_ehci_phy_mode(i) || is_ehci_tll_mode(i) ||
+ is_ehci_hsic_mode(i)) {
+ omap->ehci_logic_fck = clk_get(dev, "ehci_logic_fck");
+ if (IS_ERR(omap->ehci_logic_fck)) {
+ ret = PTR_ERR(omap->ehci_logic_fck);
+ dev_warn(dev, "ehci_logic_fck failed:%d\n",
+ ret);
+ }
+ break;
+ }
- if (time_after(jiffies, timeout))
- dev_dbg(dev, "operation timed out\n");
+ omap->utmi_p1_fck = clk_get(dev, "utmi_p1_gfclk");
+ if (IS_ERR(omap->utmi_p1_fck)) {
+ ret = PTR_ERR(omap->utmi_p1_fck);
+ dev_err(dev, "utmi_p1_gfclk failed error:%d\n", ret);
+ goto err_end;
}
- while (!(usbhs_read(omap->uhh_base, OMAP_UHH_SYSSTATUS)
- & (1 << 1))) {
- cpu_relax();
+ omap->xclk60mhsp1_ck = clk_get(dev, "xclk60mhsp1_ck");
+ if (IS_ERR(omap->xclk60mhsp1_ck)) {
+ ret = PTR_ERR(omap->xclk60mhsp1_ck);
+ dev_err(dev, "xclk60mhsp1_ck failed error:%d\n", ret);
+ goto err_utmi_p1_fck;
+ }
- if (time_after(jiffies, timeout))
- dev_dbg(dev, "operation timed out\n");
+ omap->utmi_p2_fck = clk_get(dev, "utmi_p2_gfclk");
+ if (IS_ERR(omap->utmi_p2_fck)) {
+ ret = PTR_ERR(omap->utmi_p2_fck);
+ dev_err(dev, "utmi_p2_gfclk failed error:%d\n", ret);
+ goto err_xclk60mhsp1_ck;
}
- while (!(usbhs_read(omap->uhh_base, OMAP_UHH_SYSSTATUS)
- & (1 << 2))) {
- cpu_relax();
+ omap->xclk60mhsp2_ck = clk_get(dev, "xclk60mhsp2_ck");
+ if (IS_ERR(omap->xclk60mhsp2_ck)) {
+ ret = PTR_ERR(omap->xclk60mhsp2_ck);
+ dev_err(dev, "xclk60mhsp2_ck failed error:%d\n", ret);
+ goto err_utmi_p2_fck;
+ }
- if (time_after(jiffies, timeout))
- dev_dbg(dev, "operation timed out\n");
+ omap->usbhost_p1_fck = clk_get(dev, "usb_host_hs_utmi_p1_clk");
+ if (IS_ERR(omap->usbhost_p1_fck)) {
+ ret = PTR_ERR(omap->usbhost_p1_fck);
+ dev_err(dev, "usbhost_p1_fck failed error:%d\n", ret);
+ goto err_xclk60mhsp2_ck;
}
- usbhs_write(omap->tll_base, OMAP_USBTLL_SYSCONFIG, (1 << 1));
+ omap->usbtll_p1_fck = clk_get(dev, "usb_tll_hs_usb_ch0_clk");
+ if (IS_ERR(omap->usbtll_p1_fck)) {
+ ret = PTR_ERR(omap->usbtll_p1_fck);
+ dev_err(dev, "usbtll_p1_fck failed error:%d\n", ret);
+ goto err_usbhost_p1_fck;
+ }
- while (!(usbhs_read(omap->tll_base, OMAP_USBTLL_SYSSTATUS)
- & (1 << 0))) {
- cpu_relax();
+ omap->usbhost_p2_fck = clk_get(dev, "usb_host_hs_utmi_p2_clk");
+ if (IS_ERR(omap->usbhost_p2_fck)) {
+ ret = PTR_ERR(omap->usbhost_p2_fck);
+ dev_err(dev, "usbhost_p2_fck failed error:%d\n", ret);
+ goto err_usbtll_p1_fck;
+ }
- if (time_after(jiffies, timeout))
- dev_dbg(dev, "operation timed out\n");
+ omap->usbtll_p2_fck = clk_get(dev, "usb_tll_hs_usb_ch1_clk");
+ if (IS_ERR(omap->usbtll_p2_fck)) {
+ ret = PTR_ERR(omap->usbtll_p2_fck);
+ dev_err(dev, "usbtll_p2_fck failed error:%d\n", ret);
+ goto err_usbhost_p2_fck;
}
- if (is_omap_usbhs_rev2(omap)) {
- if (is_ehci_tll_mode(pdata->port_mode[0]))
- clk_disable(omap->usbtll_p1_fck);
- if (is_ehci_tll_mode(pdata->port_mode[1]))
- clk_disable(omap->usbtll_p2_fck);
- clk_disable(omap->utmi_p2_fck);
- clk_disable(omap->utmi_p1_fck);
+ omap->init_60m_fclk = clk_get(dev, "init_60m_fclk");
+ if (IS_ERR(omap->init_60m_fclk)) {
+ ret = PTR_ERR(omap->init_60m_fclk);
+ dev_err(dev, "init_60m_fclk failed error:%d\n", ret);
+ goto err_usbtll_p2_fck;
}
- clk_disable(omap->usbtll_ick);
- clk_disable(omap->usbtll_fck);
- clk_disable(omap->usbhost_fs_fck);
- clk_disable(omap->usbhost_hs_fck);
- clk_disable(omap->usbhost_ick);
+ if (is_ehci_phy_mode(pdata->port_mode[0])) {
+ /* for OMAP3 , the clk set paretn fails */
+ ret = clk_set_parent(omap->utmi_p1_fck,
+ omap->xclk60mhsp1_ck);
+ if (ret != 0)
+ dev_err(dev, "xclk60mhsp1_ck set parent"
+ "failed error:%d\n", ret);
+ } else if (is_ehci_tll_mode(pdata->port_mode[0])) {
+ ret = clk_set_parent(omap->utmi_p1_fck,
+ omap->init_60m_fclk);
+ if (ret != 0)
+ dev_err(dev, "init_60m_fclk set parent"
+ "failed error:%d\n", ret);
+ }
- /* The gpio_free migh sleep; so unlock the spinlock */
- spin_unlock_irqrestore(&omap->lock, flags);
+ if (is_ehci_phy_mode(pdata->port_mode[1])) {
+ ret = clk_set_parent(omap->utmi_p2_fck,
+ omap->xclk60mhsp2_ck);
+ if (ret != 0)
+ dev_err(dev, "xclk60mhsp2_ck set parent"
+ "failed error:%d\n", ret);
+ } else if (is_ehci_tll_mode(pdata->port_mode[1])) {
+ ret = clk_set_parent(omap->utmi_p2_fck,
+ omap->init_60m_fclk);
+ if (ret != 0)
+ dev_err(dev, "init_60m_fclk set parent"
+ "failed error:%d\n", ret);
+ }
- if (pdata->ehci_data->phy_reset) {
- if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[0]))
- gpio_free(pdata->ehci_data->reset_gpio_port[0]);
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "uhh");
+ if (!res) {
+ dev_err(dev, "UHH EHCI get resource failed\n");
+ ret = -ENODEV;
+ goto err_init_60m_fclk;
+ }
- if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[1]))
- gpio_free(pdata->ehci_data->reset_gpio_port[1]);
+ omap->uhh_base = ioremap(res->start, resource_size(res));
+ if (!omap->uhh_base) {
+ dev_err(dev, "UHH ioremap failed\n");
+ ret = -ENOMEM;
+ goto err_init_60m_fclk;
}
- return;
-end_disble:
- spin_unlock_irqrestore(&omap->lock, flags);
-}
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "tll");
+ if (!res) {
+ dev_err(dev, "UHH EHCI get resource failed\n");
+ ret = -ENODEV;
+ goto err_tll;
+ }
-int omap_usbhs_enable(struct device *dev)
-{
- return usbhs_enable(dev->parent);
+ omap->tll_base = ioremap(res->start, resource_size(res));
+ if (!omap->tll_base) {
+ dev_err(dev, "TLL ioremap failed\n");
+ ret = -ENOMEM;
+ goto err_tll;
+ }
+
+ platform_set_drvdata(pdev, omap);
+
+ ret = omap_usbhs_alloc_children(pdev);
+ if (ret) {
+ dev_err(dev, "omap_usbhs_alloc_children failed\n");
+ goto err_alloc;
+ }
+
+ omap_usbhs_init(dev);
+
+ goto end_probe;
+
+err_alloc:
+ iounmap(omap->tll_base);
+
+err_tll:
+ iounmap(omap->uhh_base);
+
+err_init_60m_fclk:
+ clk_put(omap->init_60m_fclk);
+
+err_usbtll_p2_fck:
+ clk_put(omap->usbtll_p2_fck);
+
+err_usbhost_p2_fck:
+ clk_put(omap->usbhost_p2_fck);
+
+err_usbtll_p1_fck:
+ clk_put(omap->usbtll_p1_fck);
+
+err_usbhost_p1_fck:
+ clk_put(omap->usbhost_p1_fck);
+
+err_xclk60mhsp2_ck:
+ clk_put(omap->xclk60mhsp2_ck);
+
+err_utmi_p2_fck:
+ clk_put(omap->utmi_p2_fck);
+
+err_xclk60mhsp1_ck:
+ clk_put(omap->xclk60mhsp1_ck);
+
+err_utmi_p1_fck:
+ clk_put(omap->utmi_p1_fck);
+
+err_end:
+ clk_put(omap->ehci_logic_fck);
+ pm_runtime_disable(dev);
+ kfree(omap);
+
+end_probe:
+ return ret;
}
-EXPORT_SYMBOL_GPL(omap_usbhs_enable);
-void omap_usbhs_disable(struct device *dev)
+/**
+ * usbhs_omap_remove - shutdown processing for UHH & TLL HCDs
+ * @pdev: USB Host Controller being removed
+ *
+ * Reverses the effect of usbhs_omap_probe().
+ */
+static int __devexit usbhs_omap_remove(struct platform_device *pdev)
{
- usbhs_disable(dev->parent);
+ struct usbhs_hcd_omap *omap = platform_get_drvdata(pdev);
+
+ omap_usbhs_deinit(&pdev->dev);
+ iounmap(omap->tll_base);
+ iounmap(omap->uhh_base);
+ clk_put(omap->init_60m_fclk);
+ clk_put(omap->usbtll_p2_fck);
+ clk_put(omap->usbhost_p2_fck);
+ clk_put(omap->usbtll_p1_fck);
+ clk_put(omap->usbhost_p1_fck);
+ clk_put(omap->xclk60mhsp2_ck);
+ clk_put(omap->utmi_p2_fck);
+ clk_put(omap->xclk60mhsp1_ck);
+ clk_put(omap->utmi_p1_fck);
+ clk_put(omap->ehci_logic_fck);
+ pm_runtime_disable(&pdev->dev);
+ kfree(omap);
+
+ return 0;
}
-EXPORT_SYMBOL_GPL(omap_usbhs_disable);
+
+static const struct dev_pm_ops usbhsomap_dev_pm_ops = {
+ .runtime_suspend = usbhs_runtime_suspend,
+ .runtime_resume = usbhs_runtime_resume,
+};
static struct platform_driver usbhs_omap_driver = {
.driver = {
.name = (char *)usbhs_driver_name,
.owner = THIS_MODULE,
+ .pm = &usbhsomap_dev_pm_ops,
},
.remove = __exit_p(usbhs_omap_remove),
};
diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
index d5fe43d53c5..d1fb561e089 100644
--- a/drivers/mmc/host/omap_hsmmc.c
+++ b/drivers/mmc/host/omap_hsmmc.c
@@ -1991,6 +1991,8 @@ static int __init omap_hsmmc_probe(struct platform_device *pdev)
if (mmc_slot(host).nonremovable)
mmc->caps |= MMC_CAP_NONREMOVABLE;
+ mmc->pm_caps = mmc_slot(host).pm_caps;
+
omap_hsmmc_conf_bus_power(host);
/* Select DMA lines */
@@ -2179,13 +2181,7 @@ static int omap_hsmmc_suspend(struct device *dev)
cancel_work_sync(&host->mmc_carddetect_work);
ret = mmc_suspend_host(host->mmc);
- if (ret == 0) {
- omap_hsmmc_disable_irq(host);
- OMAP_HSMMC_WRITE(host->base, HCTL,
- OMAP_HSMMC_READ(host->base, HCTL) & ~SDBP);
- if (host->got_dbclk)
- clk_disable(host->dbclk);
- } else {
+ if (ret) {
host->suspended = 0;
if (host->pdata->resume) {
ret = host->pdata->resume(&pdev->dev,
@@ -2194,9 +2190,20 @@ static int omap_hsmmc_suspend(struct device *dev)
dev_dbg(mmc_dev(host->mmc),
"Unmask interrupt failed\n");
}
+ goto err;
}
- pm_runtime_put_sync(host->dev);
+
+ if (!(host->mmc->pm_flags & MMC_PM_KEEP_POWER)) {
+ omap_hsmmc_disable_irq(host);
+ OMAP_HSMMC_WRITE(host->base, HCTL,
+ OMAP_HSMMC_READ(host->base, HCTL) & ~SDBP);
+ }
+ if (host->got_dbclk)
+ clk_disable(host->dbclk);
+
}
+err:
+ pm_runtime_put_sync(host->dev);
return ret;
}
@@ -2216,7 +2223,8 @@ static int omap_hsmmc_resume(struct device *dev)
if (host->got_dbclk)
clk_enable(host->dbclk);
- omap_hsmmc_conf_bus_power(host);
+ if (!(host->mmc->pm_flags & MMC_PM_KEEP_POWER))
+ omap_hsmmc_conf_bus_power(host);
if (host->pdata->resume) {
ret = host->pdata->resume(&pdev->dev, host->slot_id);
diff --git a/drivers/net/ethernet/Makefile b/drivers/net/ethernet/Makefile
index cd6d69a6a7d..08d5f038887 100644
--- a/drivers/net/ethernet/Makefile
+++ b/drivers/net/ethernet/Makefile
@@ -10,7 +10,7 @@ obj-$(CONFIG_NET_VENDOR_ALTEON) += alteon/
obj-$(CONFIG_NET_VENDOR_AMD) += amd/
obj-$(CONFIG_NET_VENDOR_APPLE) += apple/
obj-$(CONFIG_NET_VENDOR_ATHEROS) += atheros/
-obj-$(CONFIG_NET_ATMEL) += cadence/
+obj-$(CONFIG_NET_CADENCE) += cadence/
obj-$(CONFIG_NET_BFIN) += adi/
obj-$(CONFIG_NET_VENDOR_BROADCOM) += broadcom/
obj-$(CONFIG_NET_VENDOR_BROCADE) += brocade/
diff --git a/drivers/net/ethernet/cadence/Kconfig b/drivers/net/ethernet/cadence/Kconfig
index b48378a41e4..db931916da0 100644
--- a/drivers/net/ethernet/cadence/Kconfig
+++ b/drivers/net/ethernet/cadence/Kconfig
@@ -5,8 +5,8 @@
config HAVE_NET_MACB
bool
-config NET_ATMEL
- bool "Atmel devices"
+config NET_CADENCE
+ bool "Cadence devices"
default y
depends on HAVE_NET_MACB || (ARM && ARCH_AT91RM9200)
---help---
@@ -21,7 +21,7 @@ config NET_ATMEL
the remaining Atmel network card questions. If you say Y, you will be
asked for your specific card in the following questions.
-if NET_ATMEL
+if NET_CADENCE
config ARM_AT91_ETHER
tristate "AT91RM9200 Ethernet support"
@@ -33,14 +33,16 @@ config ARM_AT91_ETHER
ethernet support, then you should always answer Y to this.
config MACB
- tristate "Atmel MACB support"
+ tristate "Cadence MACB/GEM support"
depends on HAVE_NET_MACB
select PHYLIB
---help---
- The Atmel MACB ethernet interface is found on many AT32 and AT91
- parts. Say Y to include support for the MACB chip.
+ The Cadence MACB ethernet interface is found on many Atmel AT32 and
+ AT91 parts. This driver also supports the Cadence GEM (Gigabit
+ Ethernet MAC found in some ARM SoC devices). Note: the Gigabit mode
+ is not yet supported. Say Y to include support for the MACB/GEM chip.
To compile this driver as a module, choose M here: the module
will be called macb.
-endif # NET_ATMEL
+endif # NET_CADENCE
diff --git a/drivers/net/ethernet/cadence/at91_ether.c b/drivers/net/ethernet/cadence/at91_ether.c
index dfeb46cb3f7..1a5b6efa012 100644
--- a/drivers/net/ethernet/cadence/at91_ether.c
+++ b/drivers/net/ethernet/cadence/at91_ether.c
@@ -256,8 +256,7 @@ static void enable_phyirq(struct net_device *dev)
unsigned int dsintr, irq_number;
int status;
- irq_number = lp->board_data.phy_irq_pin;
- if (!irq_number) {
+ if (!gpio_is_valid(lp->board_data.phy_irq_pin)) {
/*
* PHY doesn't have an IRQ pin (RTL8201, DP83847, AC101L),
* or board does not have it connected.
@@ -266,6 +265,7 @@ static void enable_phyirq(struct net_device *dev)
return;
}
+ irq_number = lp->board_data.phy_irq_pin;
status = request_irq(irq_number, at91ether_phy_interrupt, 0, dev->name, dev);
if (status) {
printk(KERN_ERR "at91_ether: PHY IRQ %d request failed - status %d!\n", irq_number, status);
@@ -320,8 +320,7 @@ static void disable_phyirq(struct net_device *dev)
unsigned int dsintr;
unsigned int irq_number;
- irq_number = lp->board_data.phy_irq_pin;
- if (!irq_number) {
+ if (!gpio_is_valid(lp->board_data.phy_irq_pin)) {
del_timer_sync(&lp->check_timer);
return;
}
@@ -366,6 +365,7 @@ static void disable_phyirq(struct net_device *dev)
disable_mdi();
spin_unlock_irq(&lp->lock);
+ irq_number = lp->board_data.phy_irq_pin;
free_irq(irq_number, dev); /* Free interrupt handler */
}
@@ -1078,7 +1078,7 @@ static int __init at91ether_setup(unsigned long phy_type, unsigned short phy_add
netif_carrier_off(dev); /* will be enabled in open() */
/* If board has no PHY IRQ, use a timer to poll the PHY */
- if (!lp->board_data.phy_irq_pin) {
+ if (!gpio_is_valid(lp->board_data.phy_irq_pin)) {
init_timer(&lp->check_timer);
lp->check_timer.data = (unsigned long)dev;
lp->check_timer.function = at91ether_check_link;
@@ -1170,7 +1170,8 @@ static int __devexit at91ether_remove(struct platform_device *pdev)
struct net_device *dev = platform_get_drvdata(pdev);
struct at91_private *lp = netdev_priv(dev);
- if (lp->board_data.phy_irq_pin >= 32)
+ if (gpio_is_valid(lp->board_data.phy_irq_pin) &&
+ lp->board_data.phy_irq_pin >= 32)
gpio_free(lp->board_data.phy_irq_pin);
unregister_netdev(dev);
@@ -1189,11 +1190,12 @@ static int at91ether_suspend(struct platform_device *pdev, pm_message_t mesg)
{
struct net_device *net_dev = platform_get_drvdata(pdev);
struct at91_private *lp = netdev_priv(net_dev);
- int phy_irq = lp->board_data.phy_irq_pin;
if (netif_running(net_dev)) {
- if (phy_irq)
+ if (gpio_is_valid(lp->board_data.phy_irq_pin)) {
+ int phy_irq = lp->board_data.phy_irq_pin;
disable_irq(phy_irq);
+ }
netif_stop_queue(net_dev);
netif_device_detach(net_dev);
@@ -1207,7 +1209,6 @@ static int at91ether_resume(struct platform_device *pdev)
{
struct net_device *net_dev = platform_get_drvdata(pdev);
struct at91_private *lp = netdev_priv(net_dev);
- int phy_irq = lp->board_data.phy_irq_pin;
if (netif_running(net_dev)) {
clk_enable(lp->ether_clk);
@@ -1215,8 +1216,10 @@ static int at91ether_resume(struct platform_device *pdev)
netif_device_attach(net_dev);
netif_start_queue(net_dev);
- if (phy_irq)
+ if (gpio_is_valid(lp->board_data.phy_irq_pin)) {
+ int phy_irq = lp->board_data.phy_irq_pin;
enable_irq(phy_irq);
+ }
}
return 0;
}
diff --git a/drivers/net/ethernet/cadence/macb.c b/drivers/net/ethernet/cadence/macb.c
index aa1d597091a..f3d5c65d99c 100644
--- a/drivers/net/ethernet/cadence/macb.c
+++ b/drivers/net/ethernet/cadence/macb.c
@@ -1,5 +1,5 @@
/*
- * Atmel MACB Ethernet Controller driver
+ * Cadence MACB/GEM Ethernet Controller driver
*
* Copyright (C) 2004-2006 Atmel Corporation
*
@@ -23,6 +23,9 @@
#include <linux/platform_data/macb.h>
#include <linux/platform_device.h>
#include <linux/phy.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_net.h>
#include "macb.h"
@@ -59,9 +62,9 @@ static void __macb_set_hwaddr(struct macb *bp)
u16 top;
bottom = cpu_to_le32(*((u32 *)bp->dev->dev_addr));
- macb_writel(bp, SA1B, bottom);
+ macb_or_gem_writel(bp, SA1B, bottom);
top = cpu_to_le16(*((u16 *)(bp->dev->dev_addr + 4)));
- macb_writel(bp, SA1T, top);
+ macb_or_gem_writel(bp, SA1T, top);
}
static void __init macb_get_hwaddr(struct macb *bp)
@@ -70,8 +73,8 @@ static void __init macb_get_hwaddr(struct macb *bp)
u16 top;
u8 addr[6];
- bottom = macb_readl(bp, SA1B);
- top = macb_readl(bp, SA1T);
+ bottom = macb_or_gem_readl(bp, SA1B);
+ top = macb_or_gem_readl(bp, SA1T);
addr[0] = bottom & 0xff;
addr[1] = (bottom >> 8) & 0xff;
@@ -191,7 +194,6 @@ static int macb_mii_probe(struct net_device *dev)
{
struct macb *bp = netdev_priv(dev);
struct phy_device *phydev;
- struct macb_platform_data *pdata;
int ret;
phydev = phy_find_first(bp->mii_bus);
@@ -200,14 +202,11 @@ static int macb_mii_probe(struct net_device *dev)
return -1;
}
- pdata = bp->pdev->dev.platform_data;
/* TODO : add pin_irq */
/* attach the mac to the phy */
ret = phy_connect_direct(dev, phydev, &macb_handle_link_change, 0,
- pdata && pdata->is_rmii ?
- PHY_INTERFACE_MODE_RMII :
- PHY_INTERFACE_MODE_MII);
+ bp->phy_interface);
if (ret) {
netdev_err(dev, "Could not attach to PHY\n");
return ret;
@@ -285,8 +284,8 @@ err_out:
static void macb_update_stats(struct macb *bp)
{
u32 __iomem *reg = bp->regs + MACB_PFR;
- u32 *p = &bp->hw_stats.rx_pause_frames;
- u32 *end = &bp->hw_stats.tx_pause_frames + 1;
+ u32 *p = &bp->hw_stats.macb.rx_pause_frames;
+ u32 *end = &bp->hw_stats.macb.tx_pause_frames + 1;
WARN_ON((unsigned long)(end - p - 1) != (MACB_TPF - MACB_PFR) / 4);
@@ -580,7 +579,10 @@ static irqreturn_t macb_interrupt(int irq, void *dev_id)
if (status & MACB_BIT(ISR_ROVR)) {
/* We missed at least one packet */
- bp->hw_stats.rx_overruns++;
+ if (macb_is_gem(bp))
+ bp->hw_stats.gem.rx_overruns++;
+ else
+ bp->hw_stats.macb.rx_overruns++;
}
if (status & MACB_BIT(HRESP)) {
@@ -790,6 +792,84 @@ static void macb_reset_hw(struct macb *bp)
macb_readl(bp, ISR);
}
+static u32 gem_mdc_clk_div(struct macb *bp)
+{
+ u32 config;
+ unsigned long pclk_hz = clk_get_rate(bp->pclk);
+
+ if (pclk_hz <= 20000000)
+ config = GEM_BF(CLK, GEM_CLK_DIV8);
+ else if (pclk_hz <= 40000000)
+ config = GEM_BF(CLK, GEM_CLK_DIV16);
+ else if (pclk_hz <= 80000000)
+ config = GEM_BF(CLK, GEM_CLK_DIV32);
+ else if (pclk_hz <= 120000000)
+ config = GEM_BF(CLK, GEM_CLK_DIV48);
+ else if (pclk_hz <= 160000000)
+ config = GEM_BF(CLK, GEM_CLK_DIV64);
+ else
+ config = GEM_BF(CLK, GEM_CLK_DIV96);
+
+ return config;
+}
+
+static u32 macb_mdc_clk_div(struct macb *bp)
+{
+ u32 config;
+ unsigned long pclk_hz;
+
+ if (macb_is_gem(bp))
+ return gem_mdc_clk_div(bp);
+
+ pclk_hz = clk_get_rate(bp->pclk);
+ if (pclk_hz <= 20000000)
+ config = MACB_BF(CLK, MACB_CLK_DIV8);
+ else if (pclk_hz <= 40000000)
+ config = MACB_BF(CLK, MACB_CLK_DIV16);
+ else if (pclk_hz <= 80000000)
+ config = MACB_BF(CLK, MACB_CLK_DIV32);
+ else
+ config = MACB_BF(CLK, MACB_CLK_DIV64);
+
+ return config;
+}
+
+/*
+ * Get the DMA bus width field of the network configuration register that we
+ * should program. We find the width from decoding the design configuration
+ * register to find the maximum supported data bus width.
+ */
+static u32 macb_dbw(struct macb *bp)
+{
+ if (!macb_is_gem(bp))
+ return 0;
+
+ switch (GEM_BFEXT(DBWDEF, gem_readl(bp, DCFG1))) {
+ case 4:
+ return GEM_BF(DBW, GEM_DBW128);
+ case 2:
+ return GEM_BF(DBW, GEM_DBW64);
+ case 1:
+ default:
+ return GEM_BF(DBW, GEM_DBW32);
+ }
+}
+
+/*
+ * Configure the receive DMA engine to use the correct receive buffer size.
+ * This is a configurable parameter for GEM.
+ */
+static void macb_configure_dma(struct macb *bp)
+{
+ u32 dmacfg;
+
+ if (macb_is_gem(bp)) {
+ dmacfg = gem_readl(bp, DMACFG) & ~GEM_BF(RXBS, -1L);
+ dmacfg |= GEM_BF(RXBS, RX_BUFFER_SIZE / 64);
+ gem_writel(bp, DMACFG, dmacfg);
+ }
+}
+
static void macb_init_hw(struct macb *bp)
{
u32 config;
@@ -797,7 +877,7 @@ static void macb_init_hw(struct macb *bp)
macb_reset_hw(bp);
__macb_set_hwaddr(bp);
- config = macb_readl(bp, NCFGR) & MACB_BF(CLK, -1L);
+ config = macb_mdc_clk_div(bp);
config |= MACB_BIT(PAE); /* PAuse Enable */
config |= MACB_BIT(DRFCS); /* Discard Rx FCS */
config |= MACB_BIT(BIG); /* Receive oversized frames */
@@ -805,8 +885,11 @@ static void macb_init_hw(struct macb *bp)
config |= MACB_BIT(CAF); /* Copy All Frames */
if (!(bp->dev->flags & IFF_BROADCAST))
config |= MACB_BIT(NBC); /* No BroadCast */
+ config |= macb_dbw(bp);
macb_writel(bp, NCFGR, config);
+ macb_configure_dma(bp);
+
/* Initialize TX and RX buffers */
macb_writel(bp, RBQP, bp->rx_ring_dma);
macb_writel(bp, TBQP, bp->tx_ring_dma);
@@ -902,8 +985,8 @@ static void macb_sethashtable(struct net_device *dev)
mc_filter[bitnr >> 5] |= 1 << (bitnr & 31);
}
- macb_writel(bp, HRB, mc_filter[0]);
- macb_writel(bp, HRT, mc_filter[1]);
+ macb_or_gem_writel(bp, HRB, mc_filter[0]);
+ macb_or_gem_writel(bp, HRT, mc_filter[1]);
}
/*
@@ -925,8 +1008,8 @@ static void macb_set_rx_mode(struct net_device *dev)
if (dev->flags & IFF_ALLMULTI) {
/* Enable all multicast mode */
- macb_writel(bp, HRB, -1);
- macb_writel(bp, HRT, -1);
+ macb_or_gem_writel(bp, HRB, -1);
+ macb_or_gem_writel(bp, HRT, -1);
cfg |= MACB_BIT(NCFGR_MTI);
} else if (!netdev_mc_empty(dev)) {
/* Enable specific multicasts */
@@ -934,8 +1017,8 @@ static void macb_set_rx_mode(struct net_device *dev)
cfg |= MACB_BIT(NCFGR_MTI);
} else if (dev->flags & (~IFF_ALLMULTI)) {
/* Disable all multicast mode */
- macb_writel(bp, HRB, 0);
- macb_writel(bp, HRT, 0);
+ macb_or_gem_writel(bp, HRB, 0);
+ macb_or_gem_writel(bp, HRT, 0);
cfg &= ~MACB_BIT(NCFGR_MTI);
}
@@ -997,11 +1080,62 @@ static int macb_close(struct net_device *dev)
return 0;
}
+static void gem_update_stats(struct macb *bp)
+{
+ u32 __iomem *reg = bp->regs + GEM_OTX;
+ u32 *p = &bp->hw_stats.gem.tx_octets_31_0;
+ u32 *end = &bp->hw_stats.gem.rx_udp_checksum_errors + 1;
+
+ for (; p < end; p++, reg++)
+ *p += __raw_readl(reg);
+}
+
+static struct net_device_stats *gem_get_stats(struct macb *bp)
+{
+ struct gem_stats *hwstat = &bp->hw_stats.gem;
+ struct net_device_stats *nstat = &bp->stats;
+
+ gem_update_stats(bp);
+
+ nstat->rx_errors = (hwstat->rx_frame_check_sequence_errors +
+ hwstat->rx_alignment_errors +
+ hwstat->rx_resource_errors +
+ hwstat->rx_overruns +
+ hwstat->rx_oversize_frames +
+ hwstat->rx_jabbers +
+ hwstat->rx_undersized_frames +
+ hwstat->rx_length_field_frame_errors);
+ nstat->tx_errors = (hwstat->tx_late_collisions +
+ hwstat->tx_excessive_collisions +
+ hwstat->tx_underrun +
+ hwstat->tx_carrier_sense_errors);
+ nstat->multicast = hwstat->rx_multicast_frames;
+ nstat->collisions = (hwstat->tx_single_collision_frames +
+ hwstat->tx_multiple_collision_frames +
+ hwstat->tx_excessive_collisions);
+ nstat->rx_length_errors = (hwstat->rx_oversize_frames +
+ hwstat->rx_jabbers +
+ hwstat->rx_undersized_frames +
+ hwstat->rx_length_field_frame_errors);
+ nstat->rx_over_errors = hwstat->rx_resource_errors;
+ nstat->rx_crc_errors = hwstat->rx_frame_check_sequence_errors;
+ nstat->rx_frame_errors = hwstat->rx_alignment_errors;
+ nstat->rx_fifo_errors = hwstat->rx_overruns;
+ nstat->tx_aborted_errors = hwstat->tx_excessive_collisions;
+ nstat->tx_carrier_errors = hwstat->tx_carrier_sense_errors;
+ nstat->tx_fifo_errors = hwstat->tx_underrun;
+
+ return nstat;
+}
+
static struct net_device_stats *macb_get_stats(struct net_device *dev)
{
struct macb *bp = netdev_priv(dev);
struct net_device_stats *nstat = &bp->stats;
- struct macb_stats *hwstat = &bp->hw_stats;
+ struct macb_stats *hwstat = &bp->hw_stats.macb;
+
+ if (macb_is_gem(bp))
+ return gem_get_stats(bp);
/* read stats from hardware */
macb_update_stats(bp);
@@ -1109,6 +1243,52 @@ static const struct net_device_ops macb_netdev_ops = {
#endif
};
+#if defined(CONFIG_OF)
+static const struct of_device_id macb_dt_ids[] = {
+ { .compatible = "cdns,at32ap7000-macb" },
+ { .compatible = "cdns,at91sam9260-macb" },
+ { .compatible = "cdns,macb" },
+ { .compatible = "cdns,pc302-gem" },
+ { .compatible = "cdns,gem" },
+ { /* sentinel */ }
+};
+
+MODULE_DEVICE_TABLE(of, macb_dt_ids);
+
+static int __devinit macb_get_phy_mode_dt(struct platform_device *pdev)
+{
+ struct device_node *np = pdev->dev.of_node;
+
+ if (np)
+ return of_get_phy_mode(np);
+
+ return -ENODEV;
+}
+
+static int __devinit macb_get_hwaddr_dt(struct macb *bp)
+{
+ struct device_node *np = bp->pdev->dev.of_node;
+ if (np) {
+ const char *mac = of_get_mac_address(np);
+ if (mac) {
+ memcpy(bp->dev->dev_addr, mac, ETH_ALEN);
+ return 0;
+ }
+ }
+
+ return -ENODEV;
+}
+#else
+static int __devinit macb_get_phy_mode_dt(struct platform_device *pdev)
+{
+ return -ENODEV;
+}
+static int __devinit macb_get_hwaddr_dt(struct macb *bp)
+{
+ return -ENODEV;
+}
+#endif
+
static int __init macb_probe(struct platform_device *pdev)
{
struct macb_platform_data *pdata;
@@ -1116,7 +1296,6 @@ static int __init macb_probe(struct platform_device *pdev)
struct net_device *dev;
struct macb *bp;
struct phy_device *phydev;
- unsigned long pclk_hz;
u32 config;
int err = -ENXIO;
@@ -1180,31 +1359,37 @@ static int __init macb_probe(struct platform_device *pdev)
dev->base_addr = regs->start;
/* Set MII management clock divider */
- pclk_hz = clk_get_rate(bp->pclk);
- if (pclk_hz <= 20000000)
- config = MACB_BF(CLK, MACB_CLK_DIV8);
- else if (pclk_hz <= 40000000)
- config = MACB_BF(CLK, MACB_CLK_DIV16);
- else if (pclk_hz <= 80000000)
- config = MACB_BF(CLK, MACB_CLK_DIV32);
- else
- config = MACB_BF(CLK, MACB_CLK_DIV64);
+ config = macb_mdc_clk_div(bp);
+ config |= macb_dbw(bp);
macb_writel(bp, NCFGR, config);
- macb_get_hwaddr(bp);
- pdata = pdev->dev.platform_data;
+ err = macb_get_hwaddr_dt(bp);
+ if (err < 0)
+ macb_get_hwaddr(bp);
+
+ err = macb_get_phy_mode_dt(pdev);
+ if (err < 0) {
+ pdata = pdev->dev.platform_data;
+ if (pdata && pdata->is_rmii)
+ bp->phy_interface = PHY_INTERFACE_MODE_RMII;
+ else
+ bp->phy_interface = PHY_INTERFACE_MODE_MII;
+ } else {
+ bp->phy_interface = err;
+ }
- if (pdata && pdata->is_rmii)
+ if (bp->phy_interface == PHY_INTERFACE_MODE_RMII)
#if defined(CONFIG_ARCH_AT91)
- macb_writel(bp, USRIO, (MACB_BIT(RMII) | MACB_BIT(CLKEN)) );
+ macb_or_gem_writel(bp, USRIO, (MACB_BIT(RMII) |
+ MACB_BIT(CLKEN)));
#else
- macb_writel(bp, USRIO, 0);
+ macb_or_gem_writel(bp, USRIO, 0);
#endif
else
#if defined(CONFIG_ARCH_AT91)
- macb_writel(bp, USRIO, MACB_BIT(CLKEN));
+ macb_or_gem_writel(bp, USRIO, MACB_BIT(CLKEN));
#else
- macb_writel(bp, USRIO, MACB_BIT(MII));
+ macb_or_gem_writel(bp, USRIO, MACB_BIT(MII));
#endif
bp->tx_pending = DEF_TX_RING_PENDING;
@@ -1221,8 +1406,9 @@ static int __init macb_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, dev);
- netdev_info(dev, "Atmel MACB at 0x%08lx irq %d (%pM)\n",
- dev->base_addr, dev->irq, dev->dev_addr);
+ netdev_info(dev, "Cadence %s at 0x%08lx irq %d (%pM)\n",
+ macb_is_gem(bp) ? "GEM" : "MACB", dev->base_addr,
+ dev->irq, dev->dev_addr);
phydev = bp->phy_dev;
netdev_info(dev, "attached PHY driver [%s] (mii_bus:phy_addr=%s, irq=%d)\n",
@@ -1315,6 +1501,7 @@ static struct platform_driver macb_driver = {
.driver = {
.name = "macb",
.owner = THIS_MODULE,
+ .of_match_table = of_match_ptr(macb_dt_ids),
},
};
@@ -1332,6 +1519,6 @@ module_init(macb_init);
module_exit(macb_exit);
MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION("Atmel MACB Ethernet driver");
+MODULE_DESCRIPTION("Cadence MACB/GEM Ethernet driver");
MODULE_AUTHOR("Haavard Skinnemoen (Atmel)");
MODULE_ALIAS("platform:macb");
diff --git a/drivers/net/ethernet/cadence/macb.h b/drivers/net/ethernet/cadence/macb.h
index d3212f6db70..335e288f531 100644
--- a/drivers/net/ethernet/cadence/macb.h
+++ b/drivers/net/ethernet/cadence/macb.h
@@ -59,6 +59,24 @@
#define MACB_TPQ 0x00bc
#define MACB_USRIO 0x00c0
#define MACB_WOL 0x00c4
+#define MACB_MID 0x00fc
+
+/* GEM register offsets. */
+#define GEM_NCFGR 0x0004
+#define GEM_USRIO 0x000c
+#define GEM_DMACFG 0x0010
+#define GEM_HRB 0x0080
+#define GEM_HRT 0x0084
+#define GEM_SA1B 0x0088
+#define GEM_SA1T 0x008C
+#define GEM_OTX 0x0100
+#define GEM_DCFG1 0x0280
+#define GEM_DCFG2 0x0284
+#define GEM_DCFG3 0x0288
+#define GEM_DCFG4 0x028c
+#define GEM_DCFG5 0x0290
+#define GEM_DCFG6 0x0294
+#define GEM_DCFG7 0x0298
/* Bitfields in NCR */
#define MACB_LB_OFFSET 0
@@ -126,6 +144,21 @@
#define MACB_IRXFCS_OFFSET 19
#define MACB_IRXFCS_SIZE 1
+/* GEM specific NCFGR bitfields. */
+#define GEM_CLK_OFFSET 18
+#define GEM_CLK_SIZE 3
+#define GEM_DBW_OFFSET 21
+#define GEM_DBW_SIZE 2
+
+/* Constants for data bus width. */
+#define GEM_DBW32 0
+#define GEM_DBW64 1
+#define GEM_DBW128 2
+
+/* Bitfields in DMACFG. */
+#define GEM_RXBS_OFFSET 16
+#define GEM_RXBS_SIZE 8
+
/* Bitfields in NSR */
#define MACB_NSR_LINK_OFFSET 0
#define MACB_NSR_LINK_SIZE 1
@@ -228,12 +261,30 @@
#define MACB_WOL_MTI_OFFSET 19
#define MACB_WOL_MTI_SIZE 1
+/* Bitfields in MID */
+#define MACB_IDNUM_OFFSET 16
+#define MACB_IDNUM_SIZE 16
+#define MACB_REV_OFFSET 0
+#define MACB_REV_SIZE 16
+
+/* Bitfields in DCFG1. */
+#define GEM_DBWDEF_OFFSET 25
+#define GEM_DBWDEF_SIZE 3
+
/* Constants for CLK */
#define MACB_CLK_DIV8 0
#define MACB_CLK_DIV16 1
#define MACB_CLK_DIV32 2
#define MACB_CLK_DIV64 3
+/* GEM specific constants for CLK. */
+#define GEM_CLK_DIV8 0
+#define GEM_CLK_DIV16 1
+#define GEM_CLK_DIV32 2
+#define GEM_CLK_DIV48 3
+#define GEM_CLK_DIV64 4
+#define GEM_CLK_DIV96 5
+
/* Constants for MAN register */
#define MACB_MAN_SOF 1
#define MACB_MAN_WRITE 1
@@ -254,11 +305,52 @@
<< MACB_##name##_OFFSET)) \
| MACB_BF(name,value))
+#define GEM_BIT(name) \
+ (1 << GEM_##name##_OFFSET)
+#define GEM_BF(name, value) \
+ (((value) & ((1 << GEM_##name##_SIZE) - 1)) \
+ << GEM_##name##_OFFSET)
+#define GEM_BFEXT(name, value)\
+ (((value) >> GEM_##name##_OFFSET) \
+ & ((1 << GEM_##name##_SIZE) - 1))
+#define GEM_BFINS(name, value, old) \
+ (((old) & ~(((1 << GEM_##name##_SIZE) - 1) \
+ << GEM_##name##_OFFSET)) \
+ | GEM_BF(name, value))
+
/* Register access macros */
#define macb_readl(port,reg) \
__raw_readl((port)->regs + MACB_##reg)
#define macb_writel(port,reg,value) \
__raw_writel((value), (port)->regs + MACB_##reg)
+#define gem_readl(port, reg) \
+ __raw_readl((port)->regs + GEM_##reg)
+#define gem_writel(port, reg, value) \
+ __raw_writel((value), (port)->regs + GEM_##reg)
+
+/*
+ * Conditional GEM/MACB macros. These perform the operation to the correct
+ * register dependent on whether the device is a GEM or a MACB. For registers
+ * and bitfields that are common across both devices, use macb_{read,write}l
+ * to avoid the cost of the conditional.
+ */
+#define macb_or_gem_writel(__bp, __reg, __value) \
+ ({ \
+ if (macb_is_gem((__bp))) \
+ gem_writel((__bp), __reg, __value); \
+ else \
+ macb_writel((__bp), __reg, __value); \
+ })
+
+#define macb_or_gem_readl(__bp, __reg) \
+ ({ \
+ u32 __v; \
+ if (macb_is_gem((__bp))) \
+ __v = gem_readl((__bp), __reg); \
+ else \
+ __v = macb_readl((__bp), __reg); \
+ __v; \
+ })
struct dma_desc {
u32 addr;
@@ -358,6 +450,54 @@ struct macb_stats {
u32 tx_pause_frames;
};
+struct gem_stats {
+ u32 tx_octets_31_0;
+ u32 tx_octets_47_32;
+ u32 tx_frames;
+ u32 tx_broadcast_frames;
+ u32 tx_multicast_frames;
+ u32 tx_pause_frames;
+ u32 tx_64_byte_frames;
+ u32 tx_65_127_byte_frames;
+ u32 tx_128_255_byte_frames;
+ u32 tx_256_511_byte_frames;
+ u32 tx_512_1023_byte_frames;
+ u32 tx_1024_1518_byte_frames;
+ u32 tx_greater_than_1518_byte_frames;
+ u32 tx_underrun;
+ u32 tx_single_collision_frames;
+ u32 tx_multiple_collision_frames;
+ u32 tx_excessive_collisions;
+ u32 tx_late_collisions;
+ u32 tx_deferred_frames;
+ u32 tx_carrier_sense_errors;
+ u32 rx_octets_31_0;
+ u32 rx_octets_47_32;
+ u32 rx_frames;
+ u32 rx_broadcast_frames;
+ u32 rx_multicast_frames;
+ u32 rx_pause_frames;
+ u32 rx_64_byte_frames;
+ u32 rx_65_127_byte_frames;
+ u32 rx_128_255_byte_frames;
+ u32 rx_256_511_byte_frames;
+ u32 rx_512_1023_byte_frames;
+ u32 rx_1024_1518_byte_frames;
+ u32 rx_greater_than_1518_byte_frames;
+ u32 rx_undersized_frames;
+ u32 rx_oversize_frames;
+ u32 rx_jabbers;
+ u32 rx_frame_check_sequence_errors;
+ u32 rx_length_field_frame_errors;
+ u32 rx_symbol_errors;
+ u32 rx_alignment_errors;
+ u32 rx_resource_errors;
+ u32 rx_overruns;
+ u32 rx_ip_header_checksum_errors;
+ u32 rx_tcp_checksum_errors;
+ u32 rx_udp_checksum_errors;
+};
+
struct macb {
void __iomem *regs;
@@ -376,7 +516,10 @@ struct macb {
struct net_device *dev;
struct napi_struct napi;
struct net_device_stats stats;
- struct macb_stats hw_stats;
+ union {
+ struct macb_stats macb;
+ struct gem_stats gem;
+ } hw_stats;
dma_addr_t rx_ring_dma;
dma_addr_t tx_ring_dma;
@@ -389,6 +532,13 @@ struct macb {
unsigned int link;
unsigned int speed;
unsigned int duplex;
+
+ phy_interface_t phy_interface;
};
+static inline bool macb_is_gem(struct macb *bp)
+{
+ return MACB_BFEXT(IDNUM, macb_readl(bp, MID)) == 0x2;
+}
+
#endif /* _MACB_H */
diff --git a/drivers/pcmcia/pxa2xx_cm_x255.c b/drivers/pcmcia/pxa2xx_cm_x255.c
index 0b4f946cf13..31ab6ddf52c 100644
--- a/drivers/pcmcia/pxa2xx_cm_x255.c
+++ b/drivers/pcmcia/pxa2xx_cm_x255.c
@@ -16,8 +16,6 @@
#include <linux/gpio.h>
#include <linux/export.h>
-#include <asm/mach-types.h>
-
#include "soc_common.h"
#define GPIO_PCMCIA_SKTSEL (54)
@@ -27,15 +25,15 @@
#define GPIO_PCMCIA_S1_RDYINT (8)
#define GPIO_PCMCIA_RESET (9)
-#define PCMCIA_S0_CD_VALID IRQ_GPIO(GPIO_PCMCIA_S0_CD_VALID)
-#define PCMCIA_S1_CD_VALID IRQ_GPIO(GPIO_PCMCIA_S1_CD_VALID)
-#define PCMCIA_S0_RDYINT IRQ_GPIO(GPIO_PCMCIA_S0_RDYINT)
-#define PCMCIA_S1_RDYINT IRQ_GPIO(GPIO_PCMCIA_S1_RDYINT)
+#define PCMCIA_S0_CD_VALID gpio_to_irq(GPIO_PCMCIA_S0_CD_VALID)
+#define PCMCIA_S1_CD_VALID gpio_to_irq(GPIO_PCMCIA_S1_CD_VALID)
+#define PCMCIA_S0_RDYINT gpio_to_irq(GPIO_PCMCIA_S0_RDYINT)
+#define PCMCIA_S1_RDYINT gpio_to_irq(GPIO_PCMCIA_S1_RDYINT)
static struct pcmcia_irqs irqs[] = {
- { 0, PCMCIA_S0_CD_VALID, "PCMCIA0 CD" },
- { 1, PCMCIA_S1_CD_VALID, "PCMCIA1 CD" },
+ { .sock = 0, .str = "PCMCIA0 CD" },
+ { .sock = 1, .str = "PCMCIA1 CD" },
};
static int cmx255_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
@@ -46,6 +44,8 @@ static int cmx255_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
gpio_direction_output(GPIO_PCMCIA_RESET, 0);
skt->socket.pci_irq = skt->nr == 0 ? PCMCIA_S0_RDYINT : PCMCIA_S1_RDYINT;
+ irqs[0].irq = PCMCIA_S0_CD_VALID;
+ irqs[1].irq = PCMCIA_S1_CD_VALID;
ret = soc_pcmcia_request_irqs(skt, irqs, ARRAY_SIZE(irqs));
if (!ret)
gpio_free(GPIO_PCMCIA_RESET);
diff --git a/drivers/pcmcia/pxa2xx_cm_x270.c b/drivers/pcmcia/pxa2xx_cm_x270.c
index 923f315926e..3dc7621a076 100644
--- a/drivers/pcmcia/pxa2xx_cm_x270.c
+++ b/drivers/pcmcia/pxa2xx_cm_x270.c
@@ -16,20 +16,18 @@
#include <linux/gpio.h>
#include <linux/export.h>
-#include <asm/mach-types.h>
-
#include "soc_common.h"
#define GPIO_PCMCIA_S0_CD_VALID (84)
#define GPIO_PCMCIA_S0_RDYINT (82)
#define GPIO_PCMCIA_RESET (53)
-#define PCMCIA_S0_CD_VALID IRQ_GPIO(GPIO_PCMCIA_S0_CD_VALID)
-#define PCMCIA_S0_RDYINT IRQ_GPIO(GPIO_PCMCIA_S0_RDYINT)
+#define PCMCIA_S0_CD_VALID gpio_to_irq(GPIO_PCMCIA_S0_CD_VALID)
+#define PCMCIA_S0_RDYINT gpio_to_irq(GPIO_PCMCIA_S0_RDYINT)
static struct pcmcia_irqs irqs[] = {
- { 0, PCMCIA_S0_CD_VALID, "PCMCIA0 CD" },
+ { .sock = 0, .str = "PCMCIA0 CD" },
};
static int cmx270_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
@@ -40,6 +38,7 @@ static int cmx270_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
gpio_direction_output(GPIO_PCMCIA_RESET, 0);
skt->socket.pci_irq = PCMCIA_S0_RDYINT;
+ irqs[0].irq = PCMCIA_S0_CD_VALID;
ret = soc_pcmcia_request_irqs(skt, irqs, ARRAY_SIZE(irqs));
if (!ret)
gpio_free(GPIO_PCMCIA_RESET);
diff --git a/drivers/pcmcia/pxa2xx_e740.c b/drivers/pcmcia/pxa2xx_e740.c
index 8bfbd4dca13..17cd2ce7428 100644
--- a/drivers/pcmcia/pxa2xx_e740.c
+++ b/drivers/pcmcia/pxa2xx_e740.c
@@ -26,20 +26,23 @@
static struct pcmcia_irqs cd_irqs[] = {
{
.sock = 0,
- .irq = IRQ_GPIO(GPIO_E740_PCMCIA_CD0),
.str = "CF card detect"
},
{
.sock = 1,
- .irq = IRQ_GPIO(GPIO_E740_PCMCIA_CD1),
.str = "Wifi switch"
},
};
static int e740_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
{
- skt->socket.pci_irq = skt->nr == 0 ? IRQ_GPIO(GPIO_E740_PCMCIA_RDY0) :
- IRQ_GPIO(GPIO_E740_PCMCIA_RDY1);
+ if (skt->nr == 0)
+ skt->socket.pci_irq = gpio_to_irq(GPIO_E740_PCMCIA_RDY0);
+ else
+ skt->socket.pci_irq = gpio_to_irq(GPIO_E740_PCMCIA_RDY1);
+
+ cd_irqs[0].irq = gpio_to_irq(GPIO_E740_PCMCIA_CD0);
+ cd_irqs[1].irq = gpio_to_irq(GPIO_E740_PCMCIA_CD1);
return soc_pcmcia_request_irqs(skt, &cd_irqs[skt->nr], 1);
}
diff --git a/drivers/pcmcia/pxa2xx_palmld.c b/drivers/pcmcia/pxa2xx_palmld.c
index d589ad1dcd4..6a8e011a8c1 100644
--- a/drivers/pcmcia/pxa2xx_palmld.c
+++ b/drivers/pcmcia/pxa2xx_palmld.c
@@ -33,7 +33,7 @@ static int palmld_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
ret = gpio_request_array(palmld_pcmcia_gpios,
ARRAY_SIZE(palmld_pcmcia_gpios));
- skt->socket.pci_irq = IRQ_GPIO(GPIO_NR_PALMLD_PCMCIA_READY);
+ skt->socket.pci_irq = gpio_to_irq(GPIO_NR_PALMLD_PCMCIA_READY);
return ret;
}
diff --git a/drivers/pcmcia/pxa2xx_palmtc.c b/drivers/pcmcia/pxa2xx_palmtc.c
index 9c6a04b2f71..9e38de769ba 100644
--- a/drivers/pcmcia/pxa2xx_palmtc.c
+++ b/drivers/pcmcia/pxa2xx_palmtc.c
@@ -37,7 +37,7 @@ static int palmtc_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
ret = gpio_request_array(palmtc_pcmcia_gpios,
ARRAY_SIZE(palmtc_pcmcia_gpios));
- skt->socket.pci_irq = IRQ_GPIO(GPIO_NR_PALMTC_PCMCIA_READY);
+ skt->socket.pci_irq = gpio_to_irq(GPIO_NR_PALMTC_PCMCIA_READY);
return ret;
}
diff --git a/drivers/pcmcia/pxa2xx_stargate2.c b/drivers/pcmcia/pxa2xx_stargate2.c
index 939622251df..6c2366b74a3 100644
--- a/drivers/pcmcia/pxa2xx_stargate2.c
+++ b/drivers/pcmcia/pxa2xx_stargate2.c
@@ -34,7 +34,7 @@
#define SG2_S0_GPIO_READY 81
static struct pcmcia_irqs irqs[] = {
- { 0, IRQ_GPIO(SG2_S0_GPIO_DETECT), "PCMCIA0 CD" },
+ {.sock = 0, .str = "PCMCIA0 CD" },
};
static struct gpio sg2_pcmcia_gpios[] = {
@@ -44,7 +44,9 @@ static struct gpio sg2_pcmcia_gpios[] = {
static int sg2_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
{
- skt->socket.pci_irq = IRQ_GPIO(SG2_S0_GPIO_READY);
+ skt->socket.pci_irq = gpio_to_irq(SG2_S0_GPIO_READY);
+ irqs[0].irq = gpio_to_irq(SG2_S0_GPIO_DETECT);
+
return soc_pcmcia_request_irqs(skt, irqs, ARRAY_SIZE(irqs));
}
diff --git a/drivers/pcmcia/pxa2xx_trizeps4.c b/drivers/pcmcia/pxa2xx_trizeps4.c
index 57ddb969d88..7c33f898135 100644
--- a/drivers/pcmcia/pxa2xx_trizeps4.c
+++ b/drivers/pcmcia/pxa2xx_trizeps4.c
@@ -30,7 +30,7 @@
extern void board_pcmcia_power(int power);
static struct pcmcia_irqs irqs[] = {
- { 0, IRQ_GPIO(GPIO_PCD), "cs0_cd" }
+ { .sock = 0, .str = "cs0_cd" }
/* on other baseboards we can have more inputs */
};
@@ -53,7 +53,8 @@ static int trizeps_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
gpio_free(GPIO_PRDY);
return -EINVAL;
}
- skt->socket.pci_irq = IRQ_GPIO(GPIO_PRDY);
+ skt->socket.pci_irq = gpio_to_irq(GPIO_PRDY);
+ irqs[0].irq = gpio_to_irq(GPIO_PCD);
break;
default:
break;
diff --git a/drivers/pcmcia/pxa2xx_vpac270.c b/drivers/pcmcia/pxa2xx_vpac270.c
index 66ab92cf310..61b17d235db 100644
--- a/drivers/pcmcia/pxa2xx_vpac270.c
+++ b/drivers/pcmcia/pxa2xx_vpac270.c
@@ -38,12 +38,10 @@ static struct gpio vpac270_cf_gpios[] = {
static struct pcmcia_irqs cd_irqs[] = {
{
.sock = 0,
- .irq = IRQ_GPIO(GPIO84_VPAC270_PCMCIA_CD),
.str = "PCMCIA CD"
},
{
.sock = 1,
- .irq = IRQ_GPIO(GPIO17_VPAC270_CF_CD),
.str = "CF CD"
},
};
@@ -57,6 +55,7 @@ static int vpac270_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
ARRAY_SIZE(vpac270_pcmcia_gpios));
skt->socket.pci_irq = gpio_to_irq(GPIO35_VPAC270_PCMCIA_RDY);
+ cd_irqs[0].irq = gpio_to_irq(GPIO84_VPAC270_PCMCIA_CD);
if (!ret)
ret = soc_pcmcia_request_irqs(skt, &cd_irqs[0], 1);
@@ -65,6 +64,7 @@ static int vpac270_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
ARRAY_SIZE(vpac270_cf_gpios));
skt->socket.pci_irq = gpio_to_irq(GPIO12_VPAC270_CF_RDY);
+ cd_irqs[1].irq = gpio_to_irq(GPIO17_VPAC270_CF_CD);
if (!ret)
ret = soc_pcmcia_request_irqs(skt, &cd_irqs[1], 1);
diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index 53eb4e55b28..877cf6fdcf2 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -774,7 +774,7 @@ config RTC_DRV_EP93XX
config RTC_DRV_SA1100
tristate "SA11x0/PXA2xx"
- depends on ARCH_SA1100 || ARCH_PXA
+ depends on ARCH_SA1100 || ARCH_PXA || ARCH_MMP
help
If you say Y here you will get access to the real time clock
built into your SA11x0 or PXA2xx CPU.
diff --git a/drivers/rtc/rtc-sa1100.c b/drivers/rtc/rtc-sa1100.c
index 0b40bb88a88..fc1ffe97fca 100644
--- a/drivers/rtc/rtc-sa1100.c
+++ b/drivers/rtc/rtc-sa1100.c
@@ -27,35 +27,42 @@
#include <linux/init.h>
#include <linux/fs.h>
#include <linux/interrupt.h>
-#include <linux/string.h>
#include <linux/pm.h>
-#include <linux/bitops.h>
+#include <linux/slab.h>
+#include <linux/clk.h>
+#include <linux/io.h>
#include <mach/hardware.h>
#include <asm/irq.h>
-#ifdef CONFIG_ARCH_PXA
-#include <mach/regs-rtc.h>
-#include <mach/regs-ost.h>
-#endif
-
#define RTC_DEF_DIVIDER (32768 - 1)
#define RTC_DEF_TRIM 0
-
-static const unsigned long RTC_FREQ = 1024;
-static struct rtc_time rtc_alarm;
-static DEFINE_SPINLOCK(sa1100_rtc_lock);
-
-static inline int rtc_periodic_alarm(struct rtc_time *tm)
-{
- return (tm->tm_year == -1) ||
- ((unsigned)tm->tm_mon >= 12) ||
- ((unsigned)(tm->tm_mday - 1) >= 31) ||
- ((unsigned)tm->tm_hour > 23) ||
- ((unsigned)tm->tm_min > 59) ||
- ((unsigned)tm->tm_sec > 59);
-}
-
+#define RTC_FREQ 1024
+
+#define RCNR 0x00 /* RTC Count Register */
+#define RTAR 0x04 /* RTC Alarm Register */
+#define RTSR 0x08 /* RTC Status Register */
+#define RTTR 0x0c /* RTC Timer Trim Register */
+
+#define RTSR_HZE (1 << 3) /* HZ interrupt enable */
+#define RTSR_ALE (1 << 2) /* RTC alarm interrupt enable */
+#define RTSR_HZ (1 << 1) /* HZ rising-edge detected */
+#define RTSR_AL (1 << 0) /* RTC alarm detected */
+
+#define rtc_readl(sa1100_rtc, reg) \
+ readl_relaxed((sa1100_rtc)->base + (reg))
+#define rtc_writel(sa1100_rtc, reg, value) \
+ writel_relaxed((value), (sa1100_rtc)->base + (reg))
+
+struct sa1100_rtc {
+ struct resource *ress;
+ void __iomem *base;
+ struct clk *clk;
+ int irq_1Hz;
+ int irq_Alrm;
+ struct rtc_device *rtc;
+ spinlock_t lock; /* Protects this structure */
+};
/*
* Calculate the next alarm time given the requested alarm time mask
* and the current time.
@@ -83,46 +90,26 @@ static void rtc_next_alarm_time(struct rtc_time *next, struct rtc_time *now,
}
}
-static int rtc_update_alarm(struct rtc_time *alrm)
-{
- struct rtc_time alarm_tm, now_tm;
- unsigned long now, time;
- int ret;
-
- do {
- now = RCNR;
- rtc_time_to_tm(now, &now_tm);
- rtc_next_alarm_time(&alarm_tm, &now_tm, alrm);
- ret = rtc_tm_to_time(&alarm_tm, &time);
- if (ret != 0)
- break;
-
- RTSR = RTSR & (RTSR_HZE|RTSR_ALE|RTSR_AL);
- RTAR = time;
- } while (now != RCNR);
-
- return ret;
-}
-
static irqreturn_t sa1100_rtc_interrupt(int irq, void *dev_id)
{
struct platform_device *pdev = to_platform_device(dev_id);
- struct rtc_device *rtc = platform_get_drvdata(pdev);
+ struct sa1100_rtc *sa1100_rtc = platform_get_drvdata(pdev);
unsigned int rtsr;
unsigned long events = 0;
- spin_lock(&sa1100_rtc_lock);
+ spin_lock(&sa1100_rtc->lock);
- rtsr = RTSR;
/* clear interrupt sources */
- RTSR = 0;
+ rtsr = rtc_readl(sa1100_rtc, RTSR);
+ rtc_writel(sa1100_rtc, RTSR, 0);
+
/* Fix for a nasty initialization problem the in SA11xx RTSR register.
* See also the comments in sa1100_rtc_probe(). */
if (rtsr & (RTSR_ALE | RTSR_HZE)) {
/* This is the original code, before there was the if test
* above. This code does not clear interrupts that were not
* enabled. */
- RTSR = (RTSR_AL | RTSR_HZ) & (rtsr >> 2);
+ rtc_writel(sa1100_rtc, RTSR, (RTSR_AL | RTSR_HZ) & (rtsr >> 2));
} else {
/* For some reason, it is possible to enter this routine
* without interruptions enabled, it has been tested with
@@ -131,13 +118,13 @@ static irqreturn_t sa1100_rtc_interrupt(int irq, void *dev_id)
* This situation leads to an infinite "loop" of interrupt
* routine calling and as a result the processor seems to
* lock on its first call to open(). */
- RTSR = RTSR_AL | RTSR_HZ;
+ rtc_writel(sa1100_rtc, RTSR, (RTSR_AL | RTSR_HZ));
}
/* clear alarm interrupt if it has occurred */
if (rtsr & RTSR_AL)
rtsr &= ~RTSR_ALE;
- RTSR = rtsr & (RTSR_ALE | RTSR_HZE);
+ rtc_writel(sa1100_rtc, RTSR, rtsr & (RTSR_ALE | RTSR_HZE));
/* update irq data & counter */
if (rtsr & RTSR_AL)
@@ -145,91 +132,100 @@ static irqreturn_t sa1100_rtc_interrupt(int irq, void *dev_id)
if (rtsr & RTSR_HZ)
events |= RTC_UF | RTC_IRQF;
- rtc_update_irq(rtc, 1, events);
+ rtc_update_irq(sa1100_rtc->rtc, 1, events);
- if (rtsr & RTSR_AL && rtc_periodic_alarm(&rtc_alarm))
- rtc_update_alarm(&rtc_alarm);
-
- spin_unlock(&sa1100_rtc_lock);
+ spin_unlock(&sa1100_rtc->lock);
return IRQ_HANDLED;
}
static int sa1100_rtc_open(struct device *dev)
{
+ struct sa1100_rtc *sa1100_rtc = dev_get_drvdata(dev);
int ret;
- struct platform_device *plat_dev = to_platform_device(dev);
- struct rtc_device *rtc = platform_get_drvdata(plat_dev);
- ret = request_irq(IRQ_RTC1Hz, sa1100_rtc_interrupt, IRQF_DISABLED,
- "rtc 1Hz", dev);
+ ret = request_irq(sa1100_rtc->irq_1Hz, sa1100_rtc_interrupt,
+ IRQF_DISABLED, "rtc 1Hz", dev);
if (ret) {
- dev_err(dev, "IRQ %d already in use.\n", IRQ_RTC1Hz);
+ dev_err(dev, "IRQ %d already in use.\n", sa1100_rtc->irq_1Hz);
goto fail_ui;
}
- ret = request_irq(IRQ_RTCAlrm, sa1100_rtc_interrupt, IRQF_DISABLED,
- "rtc Alrm", dev);
+ ret = request_irq(sa1100_rtc->irq_Alrm, sa1100_rtc_interrupt,
+ IRQF_DISABLED, "rtc Alrm", dev);
if (ret) {
- dev_err(dev, "IRQ %d already in use.\n", IRQ_RTCAlrm);
+ dev_err(dev, "IRQ %d already in use.\n", sa1100_rtc->irq_Alrm);
goto fail_ai;
}
- rtc->max_user_freq = RTC_FREQ;
- rtc_irq_set_freq(rtc, NULL, RTC_FREQ);
+ sa1100_rtc->rtc->max_user_freq = RTC_FREQ;
+ rtc_irq_set_freq(sa1100_rtc->rtc, NULL, RTC_FREQ);
return 0;
fail_ai:
- free_irq(IRQ_RTC1Hz, dev);
+ free_irq(sa1100_rtc->irq_1Hz, dev);
fail_ui:
return ret;
}
static void sa1100_rtc_release(struct device *dev)
{
- spin_lock_irq(&sa1100_rtc_lock);
- RTSR = 0;
- OIER &= ~OIER_E1;
- OSSR = OSSR_M1;
- spin_unlock_irq(&sa1100_rtc_lock);
-
- free_irq(IRQ_RTCAlrm, dev);
- free_irq(IRQ_RTC1Hz, dev);
+ struct sa1100_rtc *sa1100_rtc = dev_get_drvdata(dev);
+
+ spin_lock_irq(&sa1100_rtc->lock);
+ rtc_writel(sa1100_rtc, RTSR, 0);
+ spin_unlock_irq(&sa1100_rtc->lock);
+
+ free_irq(sa1100_rtc->irq_Alrm, dev);
+ free_irq(sa1100_rtc->irq_1Hz, dev);
}
static int sa1100_rtc_alarm_irq_enable(struct device *dev, unsigned int enabled)
{
- spin_lock_irq(&sa1100_rtc_lock);
+ struct sa1100_rtc *sa1100_rtc = dev_get_drvdata(dev);
+ unsigned int rtsr;
+
+ spin_lock_irq(&sa1100_rtc->lock);
+
+ rtsr = rtc_readl(sa1100_rtc, RTSR);
if (enabled)
- RTSR |= RTSR_ALE;
+ rtsr |= RTSR_ALE;
else
- RTSR &= ~RTSR_ALE;
- spin_unlock_irq(&sa1100_rtc_lock);
+ rtsr &= ~RTSR_ALE;
+ rtc_writel(sa1100_rtc, RTSR, rtsr);
+
+ spin_unlock_irq(&sa1100_rtc->lock);
return 0;
}
static int sa1100_rtc_read_time(struct device *dev, struct rtc_time *tm)
{
- rtc_time_to_tm(RCNR, tm);
+ struct sa1100_rtc *sa1100_rtc = dev_get_drvdata(dev);
+
+ rtc_time_to_tm(rtc_readl(sa1100_rtc, RCNR), tm);
return 0;
}
static int sa1100_rtc_set_time(struct device *dev, struct rtc_time *tm)
{
+ struct sa1100_rtc *sa1100_rtc = dev_get_drvdata(dev);
unsigned long time;
int ret;
ret = rtc_tm_to_time(tm, &time);
if (ret == 0)
- RCNR = time;
+ rtc_writel(sa1100_rtc, RCNR, time);
return ret;
}
static int sa1100_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
{
- u32 rtsr;
+ struct sa1100_rtc *sa1100_rtc = dev_get_drvdata(dev);
+ unsigned long time;
+ unsigned int rtsr;
- memcpy(&alrm->time, &rtc_alarm, sizeof(struct rtc_time));
- rtsr = RTSR;
+ time = rtc_readl(sa1100_rtc, RCNR);
+ rtc_time_to_tm(time, &alrm->time);
+ rtsr = rtc_readl(sa1100_rtc, RTSR);
alrm->enabled = (rtsr & RTSR_ALE) ? 1 : 0;
alrm->pending = (rtsr & RTSR_AL) ? 1 : 0;
return 0;
@@ -237,26 +233,39 @@ static int sa1100_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
static int sa1100_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
{
- int ret;
+ struct sa1100_rtc *sa1100_rtc = dev_get_drvdata(dev);
+ struct rtc_time now_tm, alarm_tm;
+ unsigned long time, alarm;
+ unsigned int rtsr;
- spin_lock_irq(&sa1100_rtc_lock);
- ret = rtc_update_alarm(&alrm->time);
- if (ret == 0) {
- if (alrm->enabled)
- RTSR |= RTSR_ALE;
- else
- RTSR &= ~RTSR_ALE;
- }
- spin_unlock_irq(&sa1100_rtc_lock);
+ spin_lock_irq(&sa1100_rtc->lock);
- return ret;
+ time = rtc_readl(sa1100_rtc, RCNR);
+ rtc_time_to_tm(time, &now_tm);
+ rtc_next_alarm_time(&alarm_tm, &now_tm, &alrm->time);
+ rtc_tm_to_time(&alarm_tm, &alarm);
+ rtc_writel(sa1100_rtc, RTAR, alarm);
+
+ rtsr = rtc_readl(sa1100_rtc, RTSR);
+ if (alrm->enabled)
+ rtsr |= RTSR_ALE;
+ else
+ rtsr &= ~RTSR_ALE;
+ rtc_writel(sa1100_rtc, RTSR, rtsr);
+
+ spin_unlock_irq(&sa1100_rtc->lock);
+
+ return 0;
}
static int sa1100_rtc_proc(struct device *dev, struct seq_file *seq)
{
- seq_printf(seq, "trim/divider\t\t: 0x%08x\n", (u32) RTTR);
- seq_printf(seq, "RTSR\t\t\t: 0x%08x\n", (u32)RTSR);
+ struct sa1100_rtc *sa1100_rtc = dev_get_drvdata(dev);
+ seq_printf(seq, "trim/divider\t\t: 0x%08x\n",
+ rtc_readl(sa1100_rtc, RTTR));
+ seq_printf(seq, "RTSR\t\t\t: 0x%08x\n",
+ rtc_readl(sa1100_rtc, RTSR));
return 0;
}
@@ -273,7 +282,51 @@ static const struct rtc_class_ops sa1100_rtc_ops = {
static int sa1100_rtc_probe(struct platform_device *pdev)
{
- struct rtc_device *rtc;
+ struct sa1100_rtc *sa1100_rtc;
+ unsigned int rttr;
+ int ret;
+
+ sa1100_rtc = kzalloc(sizeof(struct sa1100_rtc), GFP_KERNEL);
+ if (!sa1100_rtc)
+ return -ENOMEM;
+
+ spin_lock_init(&sa1100_rtc->lock);
+ platform_set_drvdata(pdev, sa1100_rtc);
+
+ ret = -ENXIO;
+ sa1100_rtc->ress = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!sa1100_rtc->ress) {
+ dev_err(&pdev->dev, "No I/O memory resource defined\n");
+ goto err_ress;
+ }
+
+ sa1100_rtc->irq_1Hz = platform_get_irq(pdev, 0);
+ if (sa1100_rtc->irq_1Hz < 0) {
+ dev_err(&pdev->dev, "No 1Hz IRQ resource defined\n");
+ goto err_ress;
+ }
+ sa1100_rtc->irq_Alrm = platform_get_irq(pdev, 1);
+ if (sa1100_rtc->irq_Alrm < 0) {
+ dev_err(&pdev->dev, "No alarm IRQ resource defined\n");
+ goto err_ress;
+ }
+
+ ret = -ENOMEM;
+ sa1100_rtc->base = ioremap(sa1100_rtc->ress->start,
+ resource_size(sa1100_rtc->ress));
+ if (!sa1100_rtc->base) {
+ dev_err(&pdev->dev, "Unable to map pxa RTC I/O memory\n");
+ goto err_map;
+ }
+
+ sa1100_rtc->clk = clk_get(&pdev->dev, NULL);
+ if (IS_ERR(sa1100_rtc->clk)) {
+ dev_err(&pdev->dev, "failed to find rtc clock source\n");
+ ret = PTR_ERR(sa1100_rtc->clk);
+ goto err_clk;
+ }
+ clk_prepare(sa1100_rtc->clk);
+ clk_enable(sa1100_rtc->clk);
/*
* According to the manual we should be able to let RTTR be zero
@@ -282,24 +335,24 @@ static int sa1100_rtc_probe(struct platform_device *pdev)
* If the clock divider is uninitialized then reset it to the
* default value to get the 1Hz clock.
*/
- if (RTTR == 0) {
- RTTR = RTC_DEF_DIVIDER + (RTC_DEF_TRIM << 16);
- dev_warn(&pdev->dev, "warning: "
- "initializing default clock divider/trim value\n");
+ if (rtc_readl(sa1100_rtc, RTTR) == 0) {
+ rttr = RTC_DEF_DIVIDER + (RTC_DEF_TRIM << 16);
+ rtc_writel(sa1100_rtc, RTTR, rttr);
+ dev_warn(&pdev->dev, "warning: initializing default clock"
+ " divider/trim value\n");
/* The current RTC value probably doesn't make sense either */
- RCNR = 0;
+ rtc_writel(sa1100_rtc, RCNR, 0);
}
device_init_wakeup(&pdev->dev, 1);
- rtc = rtc_device_register(pdev->name, &pdev->dev, &sa1100_rtc_ops,
- THIS_MODULE);
-
- if (IS_ERR(rtc))
- return PTR_ERR(rtc);
-
- platform_set_drvdata(pdev, rtc);
-
+ sa1100_rtc->rtc = rtc_device_register(pdev->name, &pdev->dev,
+ &sa1100_rtc_ops, THIS_MODULE);
+ if (IS_ERR(sa1100_rtc->rtc)) {
+ dev_err(&pdev->dev, "Failed to register RTC device -> %d\n",
+ ret);
+ goto err_rtc_reg;
+ }
/* Fix for a nasty initialization problem the in SA11xx RTSR register.
* See also the comments in sa1100_rtc_interrupt().
*
@@ -322,33 +375,46 @@ static int sa1100_rtc_probe(struct platform_device *pdev)
*
* Notice that clearing bit 1 and 0 is accomplished by writting ONES to
* the corresponding bits in RTSR. */
- RTSR = RTSR_AL | RTSR_HZ;
+ rtc_writel(sa1100_rtc, RTSR, (RTSR_AL | RTSR_HZ));
return 0;
+
+err_rtc_reg:
+err_clk:
+ iounmap(sa1100_rtc->base);
+err_ress:
+err_map:
+ kfree(sa1100_rtc);
+ return ret;
}
static int sa1100_rtc_remove(struct platform_device *pdev)
{
- struct rtc_device *rtc = platform_get_drvdata(pdev);
-
- if (rtc)
- rtc_device_unregister(rtc);
+ struct sa1100_rtc *sa1100_rtc = platform_get_drvdata(pdev);
+ rtc_device_unregister(sa1100_rtc->rtc);
+ clk_disable(sa1100_rtc->clk);
+ clk_unprepare(sa1100_rtc->clk);
+ iounmap(sa1100_rtc->base);
return 0;
}
#ifdef CONFIG_PM
static int sa1100_rtc_suspend(struct device *dev)
{
+ struct sa1100_rtc *sa1100_rtc = dev_get_drvdata(dev);
+
if (device_may_wakeup(dev))
- enable_irq_wake(IRQ_RTCAlrm);
+ enable_irq_wake(sa1100_rtc->irq_Alrm);
return 0;
}
static int sa1100_rtc_resume(struct device *dev)
{
+ struct sa1100_rtc *sa1100_rtc = dev_get_drvdata(dev);
+
if (device_may_wakeup(dev))
- disable_irq_wake(IRQ_RTCAlrm);
+ disable_irq_wake(sa1100_rtc->irq_Alrm);
return 0;
}
diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig
index 791f11bed60..75823a1abeb 100644
--- a/drivers/usb/Kconfig
+++ b/drivers/usb/Kconfig
@@ -48,6 +48,7 @@ config USB_ARCH_HAS_OHCI
default y if ARCH_DAVINCI_DA8XX
default y if ARCH_CNS3XXX
default y if PLAT_SPEAR
+ default y if ARCH_EXYNOS
# PPC:
default y if STB03xxx
default y if PPC_MPC52xx
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index a52769b5c90..4c0c9734251 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -380,6 +380,12 @@ config USB_OHCI_SH
Enables support for the on-chip OHCI controller on the SuperH.
If you use the PCI OHCI controller, this option is not necessary.
+config USB_OHCI_EXYNOS
+ boolean "OHCI support for Samsung EXYNOS SoC Series"
+ depends on USB_OHCI_HCD && ARCH_EXYNOS
+ help
+ Enable support for the Samsung Exynos SOC's on-chip OHCI controller.
+
config USB_CNS3XXX_OHCI
bool "Cavium CNS3XXX OHCI Module"
depends on USB_OHCI_HCD && ARCH_CNS3XXX
diff --git a/drivers/usb/host/ehci-omap.c b/drivers/usb/host/ehci-omap.c
index e33baf9052c..bba9850f32f 100644
--- a/drivers/usb/host/ehci-omap.c
+++ b/drivers/usb/host/ehci-omap.c
@@ -41,6 +41,7 @@
#include <linux/usb/ulpi.h>
#include <plat/usb.h>
#include <linux/regulator/consumer.h>
+#include <linux/pm_runtime.h>
/* EHCI Register Set */
#define EHCI_INSNREG04 (0xA0)
@@ -190,11 +191,8 @@ static int ehci_hcd_omap_probe(struct platform_device *pdev)
}
}
- ret = omap_usbhs_enable(dev);
- if (ret) {
- dev_err(dev, "failed to start usbhs with err %d\n", ret);
- goto err_enable;
- }
+ pm_runtime_enable(dev);
+ pm_runtime_get_sync(dev);
/*
* An undocumented "feature" in the OMAP3 EHCI controller,
@@ -242,11 +240,8 @@ static int ehci_hcd_omap_probe(struct platform_device *pdev)
return 0;
err_add_hcd:
- omap_usbhs_disable(dev);
-
-err_enable:
disable_put_regulator(pdata);
- usb_put_hcd(hcd);
+ pm_runtime_put_sync(dev);
err_io:
iounmap(regs);
@@ -268,10 +263,12 @@ static int ehci_hcd_omap_remove(struct platform_device *pdev)
struct usb_hcd *hcd = dev_get_drvdata(dev);
usb_remove_hcd(hcd);
- omap_usbhs_disable(dev);
disable_put_regulator(dev->platform_data);
iounmap(hcd->regs);
usb_put_hcd(hcd);
+ pm_runtime_put_sync(dev);
+ pm_runtime_disable(dev);
+
return 0;
}
diff --git a/drivers/usb/host/ohci-exynos.c b/drivers/usb/host/ohci-exynos.c
new file mode 100644
index 00000000000..55aa35aa3d7
--- /dev/null
+++ b/drivers/usb/host/ohci-exynos.c
@@ -0,0 +1,274 @@
+/*
+ * SAMSUNG EXYNOS USB HOST OHCI Controller
+ *
+ * Copyright (C) 2011 Samsung Electronics Co.Ltd
+ * Author: Jingoo Han <jg1.han@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+
+#include <linux/clk.h>
+#include <linux/platform_device.h>
+#include <mach/ohci.h>
+#include <plat/usb-phy.h>
+
+struct exynos_ohci_hcd {
+ struct device *dev;
+ struct usb_hcd *hcd;
+ struct clk *clk;
+};
+
+static int ohci_exynos_start(struct usb_hcd *hcd)
+{
+ struct ohci_hcd *ohci = hcd_to_ohci(hcd);
+ int ret;
+
+ ohci_dbg(ohci, "ohci_exynos_start, ohci:%p", ohci);
+
+ ret = ohci_init(ohci);
+ if (ret < 0)
+ return ret;
+
+ ret = ohci_run(ohci);
+ if (ret < 0) {
+ err("can't start %s", hcd->self.bus_name);
+ ohci_stop(hcd);
+ return ret;
+ }
+
+ return 0;
+}
+
+static const struct hc_driver exynos_ohci_hc_driver = {
+ .description = hcd_name,
+ .product_desc = "EXYNOS OHCI Host Controller",
+ .hcd_priv_size = sizeof(struct ohci_hcd),
+
+ .irq = ohci_irq,
+ .flags = HCD_MEMORY|HCD_USB11,
+
+ .start = ohci_exynos_start,
+ .stop = ohci_stop,
+ .shutdown = ohci_shutdown,
+
+ .get_frame_number = ohci_get_frame,
+
+ .urb_enqueue = ohci_urb_enqueue,
+ .urb_dequeue = ohci_urb_dequeue,
+ .endpoint_disable = ohci_endpoint_disable,
+
+ .hub_status_data = ohci_hub_status_data,
+ .hub_control = ohci_hub_control,
+#ifdef CONFIG_PM
+ .bus_suspend = ohci_bus_suspend,
+ .bus_resume = ohci_bus_resume,
+#endif
+ .start_port_reset = ohci_start_port_reset,
+};
+
+static int __devinit exynos_ohci_probe(struct platform_device *pdev)
+{
+ struct exynos4_ohci_platdata *pdata;
+ struct exynos_ohci_hcd *exynos_ohci;
+ struct usb_hcd *hcd;
+ struct ohci_hcd *ohci;
+ struct resource *res;
+ int irq;
+ int err;
+
+ pdata = pdev->dev.platform_data;
+ if (!pdata) {
+ dev_err(&pdev->dev, "No platform data defined\n");
+ return -EINVAL;
+ }
+
+ exynos_ohci = kzalloc(sizeof(struct exynos_ohci_hcd), GFP_KERNEL);
+ if (!exynos_ohci)
+ return -ENOMEM;
+
+ exynos_ohci->dev = &pdev->dev;
+
+ hcd = usb_create_hcd(&exynos_ohci_hc_driver, &pdev->dev,
+ dev_name(&pdev->dev));
+ if (!hcd) {
+ dev_err(&pdev->dev, "Unable to create HCD\n");
+ err = -ENOMEM;
+ goto fail_hcd;
+ }
+
+ exynos_ohci->hcd = hcd;
+ exynos_ohci->clk = clk_get(&pdev->dev, "usbhost");
+
+ if (IS_ERR(exynos_ohci->clk)) {
+ dev_err(&pdev->dev, "Failed to get usbhost clock\n");
+ err = PTR_ERR(exynos_ohci->clk);
+ goto fail_clk;
+ }
+
+ err = clk_enable(exynos_ohci->clk);
+ if (err)
+ goto fail_clken;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ dev_err(&pdev->dev, "Failed to get I/O memory\n");
+ err = -ENXIO;
+ goto fail_io;
+ }
+
+ hcd->rsrc_start = res->start;
+ hcd->rsrc_len = resource_size(res);
+ hcd->regs = ioremap(res->start, resource_size(res));
+ if (!hcd->regs) {
+ dev_err(&pdev->dev, "Failed to remap I/O memory\n");
+ err = -ENOMEM;
+ goto fail_io;
+ }
+
+ irq = platform_get_irq(pdev, 0);
+ if (!irq) {
+ dev_err(&pdev->dev, "Failed to get IRQ\n");
+ err = -ENODEV;
+ goto fail;
+ }
+
+ if (pdata->phy_init)
+ pdata->phy_init(pdev, S5P_USB_PHY_HOST);
+
+ ohci = hcd_to_ohci(hcd);
+ ohci_hcd_init(ohci);
+
+ err = usb_add_hcd(hcd, irq, IRQF_SHARED);
+ if (err) {
+ dev_err(&pdev->dev, "Failed to add USB HCD\n");
+ goto fail;
+ }
+
+ platform_set_drvdata(pdev, exynos_ohci);
+
+ return 0;
+
+fail:
+ iounmap(hcd->regs);
+fail_io:
+ clk_disable(exynos_ohci->clk);
+fail_clken:
+ clk_put(exynos_ohci->clk);
+fail_clk:
+ usb_put_hcd(hcd);
+fail_hcd:
+ kfree(exynos_ohci);
+ return err;
+}
+
+static int __devexit exynos_ohci_remove(struct platform_device *pdev)
+{
+ struct exynos4_ohci_platdata *pdata = pdev->dev.platform_data;
+ struct exynos_ohci_hcd *exynos_ohci = platform_get_drvdata(pdev);
+ struct usb_hcd *hcd = exynos_ohci->hcd;
+
+ usb_remove_hcd(hcd);
+
+ if (pdata && pdata->phy_exit)
+ pdata->phy_exit(pdev, S5P_USB_PHY_HOST);
+
+ iounmap(hcd->regs);
+
+ clk_disable(exynos_ohci->clk);
+ clk_put(exynos_ohci->clk);
+
+ usb_put_hcd(hcd);
+ kfree(exynos_ohci);
+
+ return 0;
+}
+
+static void exynos_ohci_shutdown(struct platform_device *pdev)
+{
+ struct exynos_ohci_hcd *exynos_ohci = platform_get_drvdata(pdev);
+ struct usb_hcd *hcd = exynos_ohci->hcd;
+
+ if (hcd->driver->shutdown)
+ hcd->driver->shutdown(hcd);
+}
+
+#ifdef CONFIG_PM
+static int exynos_ohci_suspend(struct device *dev)
+{
+ struct exynos_ohci_hcd *exynos_ohci = dev_get_drvdata(dev);
+ struct usb_hcd *hcd = exynos_ohci->hcd;
+ struct ohci_hcd *ohci = hcd_to_ohci(hcd);
+ struct platform_device *pdev = to_platform_device(dev);
+ struct exynos4_ohci_platdata *pdata = pdev->dev.platform_data;
+ unsigned long flags;
+ int rc = 0;
+
+ /*
+ * Root hub was already suspended. Disable irq emission and
+ * mark HW unaccessible, bail out if RH has been resumed. Use
+ * the spinlock to properly synchronize with possible pending
+ * RH suspend or resume activity.
+ *
+ * This is still racy as hcd->state is manipulated outside of
+ * any locks =P But that will be a different fix.
+ */
+ spin_lock_irqsave(&ohci->lock, flags);
+ if (hcd->state != HC_STATE_SUSPENDED && hcd->state != HC_STATE_HALT) {
+ rc = -EINVAL;
+ goto fail;
+ }
+
+ clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
+
+ if (pdata && pdata->phy_exit)
+ pdata->phy_exit(pdev, S5P_USB_PHY_HOST);
+fail:
+ spin_unlock_irqrestore(&ohci->lock, flags);
+
+ return rc;
+}
+
+static int exynos_ohci_resume(struct device *dev)
+{
+ struct exynos_ohci_hcd *exynos_ohci = dev_get_drvdata(dev);
+ struct usb_hcd *hcd = exynos_ohci->hcd;
+ struct platform_device *pdev = to_platform_device(dev);
+ struct exynos4_ohci_platdata *pdata = pdev->dev.platform_data;
+
+ if (pdata && pdata->phy_init)
+ pdata->phy_init(pdev, S5P_USB_PHY_HOST);
+
+ /* Mark hardware accessible again as we are out of D3 state by now */
+ set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
+
+ ohci_finish_controller_resume(hcd);
+
+ return 0;
+}
+#else
+#define exynos_ohci_suspend NULL
+#define exynos_ohci_resume NULL
+#endif
+
+static const struct dev_pm_ops exynos_ohci_pm_ops = {
+ .suspend = exynos_ohci_suspend,
+ .resume = exynos_ohci_resume,
+};
+
+static struct platform_driver exynos_ohci_driver = {
+ .probe = exynos_ohci_probe,
+ .remove = __devexit_p(exynos_ohci_remove),
+ .shutdown = exynos_ohci_shutdown,
+ .driver = {
+ .name = "exynos-ohci",
+ .owner = THIS_MODULE,
+ .pm = &exynos_ohci_pm_ops,
+ }
+};
+
+MODULE_ALIAS("platform:exynos-ohci");
+MODULE_AUTHOR("Jingoo Han <jg1.han@samsung.com>");
diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c
index 4fa5d8c4d23..5f5a6324143 100644
--- a/drivers/usb/host/ohci-hcd.c
+++ b/drivers/usb/host/ohci-hcd.c
@@ -1005,6 +1005,11 @@ MODULE_LICENSE ("GPL");
#define PLATFORM_DRIVER ohci_hcd_s3c2410_driver
#endif
+#ifdef CONFIG_USB_OHCI_EXYNOS
+#include "ohci-exynos.c"
+#define PLATFORM_DRIVER exynos_ohci_driver
+#endif
+
#ifdef CONFIG_USB_OHCI_HCD_OMAP1
#include "ohci-omap.c"
#define OMAP1_PLATFORM_DRIVER ohci_hcd_omap_driver
diff --git a/drivers/usb/host/ohci-omap3.c b/drivers/usb/host/ohci-omap3.c
index 516ebc4d6cc..1b8133b6e45 100644
--- a/drivers/usb/host/ohci-omap3.c
+++ b/drivers/usb/host/ohci-omap3.c
@@ -31,6 +31,7 @@
#include <linux/platform_device.h>
#include <plat/usb.h>
+#include <linux/pm_runtime.h>
/*-------------------------------------------------------------------------*/
@@ -134,7 +135,7 @@ static int __devinit ohci_hcd_omap3_probe(struct platform_device *pdev)
int irq;
if (usb_disabled())
- goto err_end;
+ return -ENODEV;
if (!dev->parent) {
dev_err(dev, "Missing parent device\n");
@@ -172,11 +173,8 @@ static int __devinit ohci_hcd_omap3_probe(struct platform_device *pdev)
hcd->rsrc_len = resource_size(res);
hcd->regs = regs;
- ret = omap_usbhs_enable(dev);
- if (ret) {
- dev_dbg(dev, "failed to start ohci\n");
- goto err_end;
- }
+ pm_runtime_enable(dev);
+ pm_runtime_get_sync(dev);
ohci_hcd_init(hcd_to_ohci(hcd));
@@ -189,9 +187,7 @@ static int __devinit ohci_hcd_omap3_probe(struct platform_device *pdev)
return 0;
err_add_hcd:
- omap_usbhs_disable(dev);
-
-err_end:
+ pm_runtime_put_sync(dev);
usb_put_hcd(hcd);
err_io:
@@ -220,9 +216,9 @@ static int __devexit ohci_hcd_omap3_remove(struct platform_device *pdev)
iounmap(hcd->regs);
usb_remove_hcd(hcd);
- omap_usbhs_disable(dev);
+ pm_runtime_put_sync(dev);
+ pm_runtime_disable(dev);
usb_put_hcd(hcd);
-
return 0;
}