Merge tag 'tty-3.4-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

Pull tty and serial fixes from Greg KH:
 "Here are some tty and serial fixes for 3.4-rc2.

  Most important here is the pl011 fix, which has been reported by about
  100 different people, which means more people use it than I expected
  :)

  There are also some 8250 driver reverts due to some problems reported
  by them.  And other minor fixes as well.

  Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"

* tag 'tty-3.4-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  pch_uart: Add Kontron COMe-mTT10 uart clock quirk
  pch_uart: Fix MSI setting issue
  serial/8250_pci: add a "force background timer" flag and use it for the "kt" serial port
  Revert "serial/8250_pci: setup-quirk workaround for the kt serial controller"
  Revert "serial/8250_pci: init-quirk msi support for kt serial controller"
  tty/serial/omap: console can only be built-in
  serial: samsung: fix omission initialize ulcon in reset port fn()
  printk(): add KERN_CONT where needed in hpet and vt code
  tty/serial: atmel_serial: fix RS485 half-duplex problem
  tty: serial: altera_uart: Check for NULL platform_data in probe.
  isdn/gigaset: use gig_dbg() for debugging output
  omap-serial: Fix the error handling in the omap_serial probe
  serial: PL011: move interrupt clearing

12 files changed, 51 insertions, 56 deletions

diff --git a/drivers/char/hpet.c b/drivers/char/hpet.c
index 3845ab44c33..dfd7876f127 100644
--- a/drivers/char/hpet.c
+++ b/drivers/char/hpet.c
@@ -906,8 +906,8 @@ int hpet_alloc(struct hpet_data *hdp)
 		hpetp->hp_which, hdp->hd_phys_address,
 		hpetp->hp_ntimer > 1 ? "s" : "");
 	for (i = 0; i < hpetp->hp_ntimer; i++)
-		printk("%s %d", i > 0 ? "," : "", hdp->hd_irq[i]);
-	printk("\n");
+		printk(KERN_CONT "%s %d", i > 0 ? "," : "", hdp->hd_irq[i]);
+	printk(KERN_CONT "\n");
 
 	temp = hpetp->hp_tick_freq;
 	remainder = do_div(temp, 1000000);
diff --git a/drivers/isdn/gigaset/interface.c b/drivers/isdn/gigaset/interface.c
index b3d6ac17272..a6d9fd2858f 100644
--- a/drivers/isdn/gigaset/interface.c
+++ b/drivers/isdn/gigaset/interface.c
@@ -176,7 +176,7 @@ static void if_close(struct tty_struct *tty, struct file *filp)
 	struct cardstate *cs = tty->driver_data;
 
 	if (!cs) { /* happens if we didn't find cs in open */
-		printk(KERN_DEBUG "%s: no cardstate\n", __func__);
+		gig_dbg(DEBUG_IF, "%s: no cardstate", __func__);
 		return;
 	}
 
diff --git a/drivers/tty/serial/8250/8250.c b/drivers/tty/serial/8250/8250.c
index 5b149b466ec..5c27f7e6c9f 100644
--- a/drivers/tty/serial/8250/8250.c
+++ b/drivers/tty/serial/8250/8250.c
@@ -1572,13 +1572,11 @@ static irqreturn_t serial8250_interrupt(int irq, void *dev_id)
 	do {
 		struct uart_8250_port *up;
 		struct uart_port *port;
-		bool skip;
 
 		up = list_entry(l, struct uart_8250_port, list);
 		port = &up->port;
-		skip = pass_counter && up->port.flags & UPF_IIR_ONCE;
 
-		if (!skip && port->handle_irq(port)) {
+		if (port->handle_irq(port)) {
 			handled = 1;
 			end = NULL;
 		} else if (end == NULL)
@@ -2037,10 +2035,12 @@ static int serial8250_startup(struct uart_port *port)
 		spin_unlock_irqrestore(&port->lock, flags);
 
 		/*
-		 * If the interrupt is not reasserted, setup a timer to
-		 * kick the UART on a regular basis.
+		 * If the interrupt is not reasserted, or we otherwise
+		 * don't trust the iir, setup a timer to kick the UART
+		 * on a regular basis.
 		 */
-		if (!(iir1 & UART_IIR_NO_INT) && (iir & UART_IIR_NO_INT)) {
+		if ((!(iir1 & UART_IIR_NO_INT) && (iir & UART_IIR_NO_INT)) ||
+		    up->port.flags & UPF_BUG_THRE) {
 			up->bugs |= UART_BUG_THRE;
 			pr_debug("ttyS%d - using backup timer\n",
 				 serial_index(port));
diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c
index da2b0b0a183..858dca865d6 100644
--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -1096,7 +1096,7 @@ static int kt_serial_setup(struct serial_private *priv,
 			   const struct pciserial_board *board,
 			   struct uart_port *port, int idx)
 {
-	port->flags |= UPF_IIR_ONCE;
+	port->flags |= UPF_BUG_THRE;
 	return skip_tx_en_setup(priv, board, port, idx);
 }
 
@@ -1118,18 +1118,6 @@ pci_xr17c154_setup(struct serial_private *priv,
 	return pci_default_setup(priv, board, port, idx);
 }
 
-static int try_enable_msi(struct pci_dev *dev)
-{
-	/* use msi if available, but fallback to legacy otherwise */
-	pci_enable_msi(dev);
-	return 0;
-}
-
-static void disable_msi(struct pci_dev *dev)
-{
-	pci_disable_msi(dev);
-}
-
 #define PCI_VENDOR_ID_SBSMODULARIO	0x124B
 #define PCI_SUBVENDOR_ID_SBSMODULARIO	0x124B
 #define PCI_DEVICE_ID_OCTPRO		0x0001
@@ -1249,9 +1237,7 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = {
 		.device		= PCI_DEVICE_ID_INTEL_PATSBURG_KT,
 		.subvendor	= PCI_ANY_ID,
 		.subdevice	= PCI_ANY_ID,
-		.init		= try_enable_msi,
 		.setup		= kt_serial_setup,
-		.exit		= disable_msi,
 	},
 	/*
 	 * ITE
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index 665beb68f67..070b442c1f8 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -1041,7 +1041,7 @@ config SERIAL_OMAP
 
 config SERIAL_OMAP_CONSOLE
 	bool "Console on OMAP serial port"
-	depends on SERIAL_OMAP
+	depends on SERIAL_OMAP=y
 	select SERIAL_CORE_CONSOLE
 	help
 	  Select this option if you would like to use omap serial port as
diff --git a/drivers/tty/serial/altera_uart.c b/drivers/tty/serial/altera_uart.c
index e7903751e05..1f0330915d5 100644
--- a/drivers/tty/serial/altera_uart.c
+++ b/drivers/tty/serial/altera_uart.c
@@ -556,7 +556,7 @@ static int __devinit altera_uart_probe(struct platform_device *pdev)
 	res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (res_mem)
 		port->mapbase = res_mem->start;
-	else if (platp->mapbase)
+	else if (platp)
 		port->mapbase = platp->mapbase;
 	else
 		return -EINVAL;
@@ -564,7 +564,7 @@ static int __devinit altera_uart_probe(struct platform_device *pdev)
 	res_irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
 	if (res_irq)
 		port->irq = res_irq->start;
-	else if (platp->irq)
+	else if (platp)
 		port->irq = platp->irq;
 
 	/* Check platform data first so we can override device node data */
diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c
index 0c65c9e6698..3d569cd68f5 100644
--- a/drivers/tty/serial/amba-pl011.c
+++ b/drivers/tty/serial/amba-pl011.c
@@ -1946,10 +1946,6 @@ static int pl011_probe(struct amba_device *dev, const struct amba_id *id)
 		goto unmap;
 	}
 
-	/* Ensure interrupts from this UART are masked and cleared */
-	writew(0, uap->port.membase + UART011_IMSC);
-	writew(0xffff, uap->port.membase + UART011_ICR);
-
 	uap->vendor = vendor;
 	uap->lcrh_rx = vendor->lcrh_rx;
 	uap->lcrh_tx = vendor->lcrh_tx;
@@ -1967,6 +1963,10 @@ static int pl011_probe(struct amba_device *dev, const struct amba_id *id)
 	uap->port.line = i;
 	pl011_dma_probe(uap);
 
+	/* Ensure interrupts from this UART are masked and cleared */
+	writew(0, uap->port.membase + UART011_IMSC);
+	writew(0xffff, uap->port.membase + UART011_ICR);
+
 	snprintf(uap->type, sizeof(uap->type), "PL011 rev%u", amba_rev(dev));
 
 	amba_ports[i] = uap;
diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c
index f9a6be7a9be..3d7e1ee2fa5 100644
--- a/drivers/tty/serial/atmel_serial.c
+++ b/drivers/tty/serial/atmel_serial.c
@@ -389,6 +389,8 @@ static void atmel_start_rx(struct uart_port *port)
 {
 	UART_PUT_CR(port, ATMEL_US_RSTSTA);  /* reset status and receiver */
 
+	UART_PUT_CR(port, ATMEL_US_RXEN);
+
 	if (atmel_use_dma_rx(port)) {
 		/* enable PDC controller */
 		UART_PUT_IER(port, ATMEL_US_ENDRX | ATMEL_US_TIMEOUT |
@@ -404,6 +406,8 @@ static void atmel_start_rx(struct uart_port *port)
  */
 static void atmel_stop_rx(struct uart_port *port)
 {
+	UART_PUT_CR(port, ATMEL_US_RXDIS);
+
 	if (atmel_use_dma_rx(port)) {
 		/* disable PDC receive */
 		UART_PUT_PTCR(port, ATMEL_PDC_RXTDIS);
diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c
index 0121486ac4f..d00b38eb268 100644
--- a/drivers/tty/serial/omap-serial.c
+++ b/drivers/tty/serial/omap-serial.c
@@ -1381,29 +1381,24 @@ static int serial_omap_probe(struct platform_device *pdev)
 		return -ENODEV;
 	}
 
-	if (!request_mem_region(mem->start, resource_size(mem),
+	if (!devm_request_mem_region(&pdev->dev, mem->start, resource_size(mem),
 				pdev->dev.driver->name)) {
 		dev_err(&pdev->dev, "memory region already claimed\n");
 		return -EBUSY;
 	}
 
 	dma_rx = platform_get_resource_byname(pdev, IORESOURCE_DMA, "rx");
-	if (!dma_rx) {
-		ret = -EINVAL;
-		goto err;
-	}
+	if (!dma_rx)
+		return -ENXIO;
 
 	dma_tx = platform_get_resource_byname(pdev, IORESOURCE_DMA, "tx");
-	if (!dma_tx) {
-		ret = -EINVAL;
-		goto err;
-	}
+	if (!dma_tx)
+		return -ENXIO;
+
+	up = devm_kzalloc(&pdev->dev, sizeof(*up), GFP_KERNEL);
+	if (!up)
+		return -ENOMEM;
 
-	up = kzalloc(sizeof(*up), GFP_KERNEL);
-	if (up == NULL) {
-		ret = -ENOMEM;
-		goto do_release_region;
-	}
 	up->pdev = pdev;
 	up->port.dev = &pdev->dev;
 	up->port.type = PORT_OMAP;
@@ -1423,16 +1418,17 @@ static int serial_omap_probe(struct platform_device *pdev)
 		dev_err(&pdev->dev, "failed to get alias/pdev id, errno %d\n",
 								up->port.line);
 		ret = -ENODEV;
-		goto err;
+		goto err_port_line;
 	}
 
 	sprintf(up->name, "OMAP UART%d", up->port.line);
 	up->port.mapbase = mem->start;
-	up->port.membase = ioremap(mem->start, resource_size(mem));
+	up->port.membase = devm_ioremap(&pdev->dev, mem->start,
+						resource_size(mem));
 	if (!up->port.membase) {
 		dev_err(&pdev->dev, "can't ioremap UART\n");
 		ret = -ENOMEM;
-		goto err;
+		goto err_ioremap;
 	}
 
 	up->port.flags = omap_up_info->flags;
@@ -1478,16 +1474,19 @@ static int serial_omap_probe(struct platform_device *pdev)
 
 	ret = uart_add_one_port(&serial_omap_reg, &up->port);
 	if (ret != 0)
-		goto do_release_region;
+		goto err_add_port;
 
 	pm_runtime_put(&pdev->dev);
 	platform_set_drvdata(pdev, up);
 	return 0;
-err:
+
+err_add_port:
+	pm_runtime_put(&pdev->dev);
+	pm_runtime_disable(&pdev->dev);
+err_ioremap:
+err_port_line:
 	dev_err(&pdev->dev, "[UART%d]: failure [%s]: %d\n",
 				pdev->id, __func__, ret);
-do_release_region:
-	release_mem_region(mem->start, resource_size(mem));
 	return ret;
 }
 
@@ -1499,8 +1498,6 @@ static int serial_omap_remove(struct platform_device *dev)
 		pm_runtime_disable(&up->pdev->dev);
 		uart_remove_one_port(&serial_omap_reg, &up->port);
 		pm_qos_remove_request(&up->pm_qos_request);
-
-		kfree(up);
 	}
 
 	platform_set_drvdata(dev, NULL);
diff --git a/drivers/tty/serial/pch_uart.c b/drivers/tty/serial/pch_uart.c
index 08b9962b8fd..bbbec4a74cf 100644
--- a/drivers/tty/serial/pch_uart.c
+++ b/drivers/tty/serial/pch_uart.c
@@ -210,6 +210,7 @@ enum {
 #define CMITC_UARTCLK   192000000 /* 192.0000 MHz */
 #define FRI2_64_UARTCLK  64000000 /*  64.0000 MHz */
 #define FRI2_48_UARTCLK  48000000 /*  48.0000 MHz */
+#define NTC1_UARTCLK     64000000 /*  64.0000 MHz */
 
 struct pch_uart_buffer {
 	unsigned char *buf;
@@ -384,6 +385,12 @@ static int pch_uart_get_uartclk(void)
 	if (cmp && strstr(cmp, "Fish River Island II"))
 		return FRI2_48_UARTCLK;
 
+	/* Kontron COMe-mTT10 (nanoETXexpress-TT) */
+	cmp = dmi_get_system_info(DMI_BOARD_NAME);
+	if (cmp && (strstr(cmp, "COMe-mTT") ||
+		    strstr(cmp, "nanoETXexpress-TT")))
+		return NTC1_UARTCLK;
+
 	return DEFAULT_UARTCLK;
 }
 
@@ -1651,6 +1658,7 @@ static struct eg20t_port *pch_uart_init_port(struct pci_dev *pdev,
 	}
 
 	pci_enable_msi(pdev);
+	pci_set_master(pdev);
 
 	iobase = pci_resource_start(pdev, 0);
 	mapbase = pci_resource_start(pdev, 1);
diff --git a/drivers/tty/serial/samsung.c b/drivers/tty/serial/samsung.c
index de249d265be..d8b0aee3563 100644
--- a/drivers/tty/serial/samsung.c
+++ b/drivers/tty/serial/samsung.c
@@ -982,6 +982,7 @@ static void s3c24xx_serial_resetport(struct uart_port *port,
 
 	ucon &= ucon_mask;
 	wr_regl(port, S3C2410_UCON,  ucon | cfg->ucon);
+	wr_regl(port, S3C2410_ULCON, cfg->ulcon);
 
 	/* reset both fifos */
 	wr_regl(port, S3C2410_UFCON, cfg->ufcon | S3C2410_UFCON_RESETBOTH);
diff --git a/drivers/tty/vt/vt.c b/drivers/tty/vt/vt.c
index 3bdd4b19dd0..2156188db4a 100644
--- a/drivers/tty/vt/vt.c
+++ b/drivers/tty/vt/vt.c
@@ -2932,11 +2932,10 @@ static int __init con_init(void)
 	gotoxy(vc, vc->vc_x, vc->vc_y);
 	csi_J(vc, 0);
 	update_screen(vc);
-	pr_info("Console: %s %s %dx%d",
+	pr_info("Console: %s %s %dx%d\n",
 		vc->vc_can_do_color ? "colour" : "mono",
 		display_desc, vc->vc_cols, vc->vc_rows);
 	printable = 1;
-	printk("\n");
 
 	console_unlock();