Merge branch 'linus' into sched/core

Merge reason: we'll queue up dependent patches.

Signed-off-by: Ingo Molnar <mingo@elte.hu>

53 files changed, 427 insertions, 2709 deletions

diff --git a/drivers/usb/class/cdc-wdm.c b/drivers/usb/class/cdc-wdm.c
index 1c50baff772..d2b3cffca3f 100644
--- a/drivers/usb/class/cdc-wdm.c
+++ b/drivers/usb/class/cdc-wdm.c
@@ -57,6 +57,8 @@ MODULE_DEVICE_TABLE (usb, wdm_ids);
 
 #define WDM_MAX			16
 
+/* CDC-WMC r1.1 requires wMaxCommand to be "at least 256 decimal (0x100)" */
+#define WDM_DEFAULT_BUFSIZE	256
 
 static DEFINE_MUTEX(wdm_mutex);
 
@@ -88,7 +90,8 @@ struct wdm_device {
 	int			count;
 	dma_addr_t		shandle;
 	dma_addr_t		ihandle;
-	struct mutex		lock;
+	struct mutex		wlock;
+	struct mutex		rlock;
 	wait_queue_head_t	wait;
 	struct work_struct	rxwork;
 	int			werr;
@@ -323,7 +326,7 @@ static ssize_t wdm_write
 	}
 
 	/* concurrent writes and disconnect */
-	r = mutex_lock_interruptible(&desc->lock);
+	r = mutex_lock_interruptible(&desc->wlock);
 	rv = -ERESTARTSYS;
 	if (r) {
 		kfree(buf);
@@ -386,7 +389,7 @@ static ssize_t wdm_write
 out:
 	usb_autopm_put_interface(desc->intf);
 outnp:
-	mutex_unlock(&desc->lock);
+	mutex_unlock(&desc->wlock);
 outnl:
 	return rv < 0 ? rv : count;
 }
@@ -399,7 +402,7 @@ static ssize_t wdm_read
 	struct wdm_device *desc = file->private_data;
 
 
-	rv = mutex_lock_interruptible(&desc->lock); /*concurrent reads */
+	rv = mutex_lock_interruptible(&desc->rlock); /*concurrent reads */
 	if (rv < 0)
 		return -ERESTARTSYS;
 
@@ -467,14 +470,16 @@ retry:
 	for (i = 0; i < desc->length - cntr; i++)
 		desc->ubuf[i] = desc->ubuf[i + cntr];
 
+	spin_lock_irq(&desc->iuspin);
 	desc->length -= cntr;
+	spin_unlock_irq(&desc->iuspin);
 	/* in case we had outstanding data */
 	if (!desc->length)
 		clear_bit(WDM_READ, &desc->flags);
 	rv = cntr;
 
 err:
-	mutex_unlock(&desc->lock);
+	mutex_unlock(&desc->rlock);
 	return rv;
 }
 
@@ -540,7 +545,8 @@ static int wdm_open(struct inode *inode, struct file *file)
 	}
 	intf->needs_remote_wakeup = 1;
 
-	mutex_lock(&desc->lock);
+	/* using write lock to protect desc->count */
+	mutex_lock(&desc->wlock);
 	if (!desc->count++) {
 		desc->werr = 0;
 		desc->rerr = 0;
@@ -553,7 +559,7 @@ static int wdm_open(struct inode *inode, struct file *file)
 	} else {
 		rv = 0;
 	}
-	mutex_unlock(&desc->lock);
+	mutex_unlock(&desc->wlock);
 	usb_autopm_put_interface(desc->intf);
 out:
 	mutex_unlock(&wdm_mutex);
@@ -565,9 +571,11 @@ static int wdm_release(struct inode *inode, struct file *file)
 	struct wdm_device *desc = file->private_data;
 
 	mutex_lock(&wdm_mutex);
-	mutex_lock(&desc->lock);
+
+	/* using write lock to protect desc->count */
+	mutex_lock(&desc->wlock);
 	desc->count--;
-	mutex_unlock(&desc->lock);
+	mutex_unlock(&desc->wlock);
 
 	if (!desc->count) {
 		dev_dbg(&desc->intf->dev, "wdm_release: cleanup");
@@ -630,7 +638,7 @@ static int wdm_probe(struct usb_interface *intf, const struct usb_device_id *id)
 	struct usb_cdc_dmm_desc *dmhd;
 	u8 *buffer = intf->altsetting->extra;
 	int buflen = intf->altsetting->extralen;
-	u16 maxcom = 0;
+	u16 maxcom = WDM_DEFAULT_BUFSIZE;
 
 	if (!buffer)
 		goto out;
@@ -665,7 +673,8 @@ next_desc:
 	desc = kzalloc(sizeof(struct wdm_device), GFP_KERNEL);
 	if (!desc)
 		goto out;
-	mutex_init(&desc->lock);
+	mutex_init(&desc->rlock);
+	mutex_init(&desc->wlock);
 	spin_lock_init(&desc->iuspin);
 	init_waitqueue_head(&desc->wait);
 	desc->wMaxCommand = maxcom;
@@ -716,7 +725,7 @@ next_desc:
 		goto err;
 
 	desc->inbuf = usb_alloc_coherent(interface_to_usbdev(intf),
-					 desc->bMaxPacketSize0,
+					 desc->wMaxCommand,
 					 GFP_KERNEL,
 					 &desc->response->transfer_dma);
 	if (!desc->inbuf)
@@ -779,11 +788,13 @@ static void wdm_disconnect(struct usb_interface *intf)
 	/* to terminate pending flushes */
 	clear_bit(WDM_IN_USE, &desc->flags);
 	spin_unlock_irqrestore(&desc->iuspin, flags);
-	mutex_lock(&desc->lock);
+	wake_up_all(&desc->wait);
+	mutex_lock(&desc->rlock);
+	mutex_lock(&desc->wlock);
 	kill_urbs(desc);
 	cancel_work_sync(&desc->rxwork);
-	mutex_unlock(&desc->lock);
-	wake_up_all(&desc->wait);
+	mutex_unlock(&desc->wlock);
+	mutex_unlock(&desc->rlock);
 	if (!desc->count)
 		cleanup(desc);
 	mutex_unlock(&wdm_mutex);
@@ -798,8 +809,10 @@ static int wdm_suspend(struct usb_interface *intf, pm_message_t message)
 	dev_dbg(&desc->intf->dev, "wdm%d_suspend\n", intf->minor);
 
 	/* if this is an autosuspend the caller does the locking */
-	if (!PMSG_IS_AUTO(message))
-		mutex_lock(&desc->lock);
+	if (!PMSG_IS_AUTO(message)) {
+		mutex_lock(&desc->rlock);
+		mutex_lock(&desc->wlock);
+	}
 	spin_lock_irq(&desc->iuspin);
 
 	if (PMSG_IS_AUTO(message) &&
@@ -815,8 +828,10 @@ static int wdm_suspend(struct usb_interface *intf, pm_message_t message)
 		kill_urbs(desc);
 		cancel_work_sync(&desc->rxwork);
 	}
-	if (!PMSG_IS_AUTO(message))
-		mutex_unlock(&desc->lock);
+	if (!PMSG_IS_AUTO(message)) {
+		mutex_unlock(&desc->wlock);
+		mutex_unlock(&desc->rlock);
+	}
 
 	return rv;
 }
@@ -854,7 +869,8 @@ static int wdm_pre_reset(struct usb_interface *intf)
 {
 	struct wdm_device *desc = usb_get_intfdata(intf);
 
-	mutex_lock(&desc->lock);
+	mutex_lock(&desc->rlock);
+	mutex_lock(&desc->wlock);
 	kill_urbs(desc);
 
 	/*
@@ -876,7 +892,8 @@ static int wdm_post_reset(struct usb_interface *intf)
 	int rv;
 
 	rv = recover_from_urb_loss(desc);
-	mutex_unlock(&desc->lock);
+	mutex_unlock(&desc->wlock);
+	mutex_unlock(&desc->rlock);
 	return 0;
 }
 
diff --git a/drivers/usb/core/hcd-pci.c b/drivers/usb/core/hcd-pci.c
index d136b8f4c8a..81e2c0d9c17 100644
--- a/drivers/usb/core/hcd-pci.c
+++ b/drivers/usb/core/hcd-pci.c
@@ -187,7 +187,10 @@ int usb_hcd_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
 		return -ENODEV;
 	dev->current_state = PCI_D0;
 
-	if (!dev->irq) {
+	/* The xHCI driver supports MSI and MSI-X,
+	 * so don't fail if the BIOS doesn't provide a legacy IRQ.
+	 */
+	if (!dev->irq && (driver->flags & HCD_MASK) != HCD_USB3) {
 		dev_err(&dev->dev,
 			"Found HC with no IRQ.  Check BIOS/PCI %s setup!\n",
 			pci_name(dev));
diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
index eb19cba34ac..e1282328fc2 100644
--- a/drivers/usb/core/hcd.c
+++ b/drivers/usb/core/hcd.c
@@ -2447,8 +2447,10 @@ int usb_add_hcd(struct usb_hcd *hcd,
 			&& device_can_wakeup(&hcd->self.root_hub->dev))
 		dev_dbg(hcd->self.controller, "supports USB remote wakeup\n");
 
-	/* enable irqs just before we start the controller */
-	if (usb_hcd_is_primary_hcd(hcd)) {
+	/* enable irqs just before we start the controller,
+	 * if the BIOS provides legacy PCI irqs.
+	 */
+	if (usb_hcd_is_primary_hcd(hcd) && irqnum) {
 		retval = usb_hcd_request_irqs(hcd, irqnum, irqflags);
 		if (retval)
 			goto err_request_irq;
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index a0613d8f9be..265c2f675d0 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -705,10 +705,26 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type)
 	if (type == HUB_INIT3)
 		goto init3;
 
-	/* After a resume, port power should still be on.
+	/* The superspeed hub except for root hub has to use Hub Depth
+	 * value as an offset into the route string to locate the bits
+	 * it uses to determine the downstream port number. So hub driver
+	 * should send a set hub depth request to superspeed hub after
+	 * the superspeed hub is set configuration in initialization or
+	 * reset procedure.
+	 *
+	 * After a resume, port power should still be on.
 	 * For any other type of activation, turn it on.
 	 */
 	if (type != HUB_RESUME) {
+		if (hdev->parent && hub_is_superspeed(hdev)) {
+			ret = usb_control_msg(hdev, usb_sndctrlpipe(hdev, 0),
+					HUB_SET_DEPTH, USB_RT_HUB,
+					hdev->level - 1, 0, NULL, 0,
+					USB_CTRL_SET_TIMEOUT);
+			if (ret < 0)
+				dev_err(hub->intfdev,
+						"set hub depth failed\n");
+		}
 
 		/* Speed up system boot by using a delayed_work for the
 		 * hub's initial power-up delays.  This is pretty awkward
@@ -987,18 +1003,6 @@ static int hub_configure(struct usb_hub *hub,
 		goto fail;
 	}
 
-	if (hub_is_superspeed(hdev) && (hdev->parent != NULL)) {
-		ret = usb_control_msg(hdev, usb_sndctrlpipe(hdev, 0),
-				HUB_SET_DEPTH, USB_RT_HUB,
-				hdev->level - 1, 0, NULL, 0,
-				USB_CTRL_SET_TIMEOUT);
-
-		if (ret < 0) {
-			message = "can't set hub depth";
-			goto fail;
-		}
-	}
-
 	/* Request the entire hub descriptor.
 	 * hub->descriptor can handle USB_MAXCHILDREN ports,
 	 * but the hub can/will return fewer bytes here.
diff --git a/drivers/usb/dwc3/ep0.c b/drivers/usb/dwc3/ep0.c
index 2f51de57593..c8df1dd967e 100644
--- a/drivers/usb/dwc3/ep0.c
+++ b/drivers/usb/dwc3/ep0.c
@@ -126,7 +126,6 @@ static int __dwc3_gadget_ep0_queue(struct dwc3_ep *dep,
 		struct dwc3_request *req)
 {
 	struct dwc3		*dwc = dep->dwc;
-	u32			type;
 	int			ret = 0;
 
 	req->request.actual	= 0;
@@ -149,20 +148,14 @@ static int __dwc3_gadget_ep0_queue(struct dwc3_ep *dep,
 
 		direction = !!(dep->flags & DWC3_EP0_DIR_IN);
 
-		if (dwc->ep0state == EP0_STATUS_PHASE) {
-			type = dwc->three_stage_setup
-				? DWC3_TRBCTL_CONTROL_STATUS3
-				: DWC3_TRBCTL_CONTROL_STATUS2;
-		} else if (dwc->ep0state == EP0_DATA_PHASE) {
-			type = DWC3_TRBCTL_CONTROL_DATA;
-		} else {
-			/* should never happen */
-			WARN_ON(1);
+		if (dwc->ep0state != EP0_DATA_PHASE) {
+			dev_WARN(dwc->dev, "Unexpected pending request\n");
 			return 0;
 		}
 
 		ret = dwc3_ep0_start_trans(dwc, direction,
-				req->request.dma, req->request.length, type);
+				req->request.dma, req->request.length,
+				DWC3_TRBCTL_CONTROL_DATA);
 		dep->flags &= ~(DWC3_EP_PENDING_REQUEST |
 				DWC3_EP0_DIR_IN);
 	} else if (dwc->delayed_status) {
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index a696bde5322..064b6e2cd41 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -101,7 +101,7 @@ void dwc3_unmap_buffer_from_dma(struct dwc3_request *req)
 	if (req->request.num_mapped_sgs) {
 		req->request.dma = DMA_ADDR_INVALID;
 		dma_unmap_sg(dwc->dev, req->request.sg,
-				req->request.num_sgs,
+				req->request.num_mapped_sgs,
 				req->direction ? DMA_TO_DEVICE
 				: DMA_FROM_DEVICE);
 
diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c
index a95de6a4a13..baaebf2830f 100644
--- a/drivers/usb/gadget/composite.c
+++ b/drivers/usb/gadget/composite.c
@@ -175,13 +175,12 @@ ep_found:
 	_ep->comp_desc = comp_desc;
 	if (g->speed == USB_SPEED_SUPER) {
 		switch (usb_endpoint_type(_ep->desc)) {
-		case USB_ENDPOINT_XFER_BULK:
-		case USB_ENDPOINT_XFER_INT:
-			_ep->maxburst = comp_desc->bMaxBurst;
-			break;
 		case USB_ENDPOINT_XFER_ISOC:
 			/* mult: bits 1:0 of bmAttributes */
 			_ep->mult = comp_desc->bmAttributes & 0x3;
+		case USB_ENDPOINT_XFER_BULK:
+		case USB_ENDPOINT_XFER_INT:
+			_ep->maxburst = comp_desc->bMaxBurst;
 			break;
 		default:
 			/* Do nothing for control endpoints */
diff --git a/drivers/usb/gadget/epautoconf.c b/drivers/usb/gadget/epautoconf.c
index 753aa0683ac..e0e6375ef5d 100644
--- a/drivers/usb/gadget/epautoconf.c
+++ b/drivers/usb/gadget/epautoconf.c
@@ -126,7 +126,7 @@ ep_matches (
 	 * descriptor and see if the EP matches it
 	 */
 	if (usb_endpoint_xfer_bulk(desc)) {
-		if (ep_comp) {
+		if (ep_comp && gadget->max_speed >= USB_SPEED_SUPER) {
 			num_req_streams = ep_comp->bmAttributes & 0x1f;
 			if (num_req_streams > ep->max_streams)
 				return 0;
diff --git a/drivers/usb/gadget/f_loopback.c b/drivers/usb/gadget/f_loopback.c
index 6d87f288df4..2c0cd824c66 100644
--- a/drivers/usb/gadget/f_loopback.c
+++ b/drivers/usb/gadget/f_loopback.c
@@ -418,7 +418,7 @@ int __init loopback_add(struct usb_composite_dev *cdev, bool autoresume)
 
 	/* support autoresume for remote wakeup testing */
 	if (autoresume)
-		sourcesink_driver.bmAttributes |= USB_CONFIG_ATT_WAKEUP;
+		loopback_driver.bmAttributes |= USB_CONFIG_ATT_WAKEUP;
 
 	/* support OTG systems */
 	if (gadget_is_otg(cdev->gadget)) {
diff --git a/drivers/usb/gadget/f_mass_storage.c b/drivers/usb/gadget/f_mass_storage.c
index 6353eca1e85..ee8ceec0156 100644
--- a/drivers/usb/gadget/f_mass_storage.c
+++ b/drivers/usb/gadget/f_mass_storage.c
@@ -3123,15 +3123,15 @@ fsg_add(struct usb_composite_dev *cdev, struct usb_configuration *c,
 
 struct fsg_module_parameters {
 	char		*file[FSG_MAX_LUNS];
-	int		ro[FSG_MAX_LUNS];
-	int		removable[FSG_MAX_LUNS];
-	int		cdrom[FSG_MAX_LUNS];
-	int		nofua[FSG_MAX_LUNS];
+	bool		ro[FSG_MAX_LUNS];
+	bool		removable[FSG_MAX_LUNS];
+	bool		cdrom[FSG_MAX_LUNS];
+	bool		nofua[FSG_MAX_LUNS];
 
 	unsigned int	file_count, ro_count, removable_count, cdrom_count;
 	unsigned int	nofua_count;
 	unsigned int	luns;	/* nluns */
-	int		stall;	/* can_stall */
+	bool		stall;	/* can_stall */
 };
 
 #define _FSG_MODULE_PARAM_ARRAY(prefix, params, name, type, desc)	\
diff --git a/drivers/usb/gadget/fsl_udc_core.c b/drivers/usb/gadget/fsl_udc_core.c
index d7ea6c076ce..b04712f19f1 100644
--- a/drivers/usb/gadget/fsl_udc_core.c
+++ b/drivers/usb/gadget/fsl_udc_core.c
@@ -1430,7 +1430,7 @@ static void setup_received_irq(struct fsl_udc *udc,
 			int pipe = get_pipe_by_windex(wIndex);
 			struct fsl_ep *ep;
 
-			if (wValue != 0 || wLength != 0 || pipe > udc->max_ep)
+			if (wValue != 0 || wLength != 0 || pipe >= udc->max_ep)
 				break;
 			ep = get_ep_by_pipe(udc, pipe);
 
@@ -1673,7 +1673,7 @@ static void dtd_complete_irq(struct fsl_udc *udc)
 	if (!bit_pos)
 		return;
 
-	for (i = 0; i < udc->max_ep * 2; i++) {
+	for (i = 0; i < udc->max_ep; i++) {
 		ep_num = i >> 1;
 		direction = i % 2;
 
diff --git a/drivers/usb/gadget/langwell_udc.c b/drivers/usb/gadget/langwell_udc.c
index fa0fcc11263..e2293c1588e 100644
--- a/drivers/usb/gadget/langwell_udc.c
+++ b/drivers/usb/gadget/langwell_udc.c
@@ -11,11 +11,6 @@
 /* #undef	DEBUG */
 /* #undef	VERBOSE_DEBUG */
 
-#if defined(CONFIG_USB_LANGWELL_OTG)
-#define	OTG_TRANSCEIVER
-#endif
-
-
 #include <linux/module.h>
 #include <linux/pci.h>
 #include <linux/dma-mapping.h>
@@ -1522,8 +1517,7 @@ static void langwell_udc_stop(struct langwell_udc *dev)
 
 
 /* stop all USB activities */
-static void stop_activity(struct langwell_udc *dev,
-		struct usb_gadget_driver *driver)
+static void stop_activity(struct langwell_udc *dev)
 {
 	struct langwell_ep	*ep;
 	dev_dbg(&dev->pdev->dev, "---> %s()\n", __func__);
@@ -1535,9 +1529,9 @@ static void stop_activity(struct langwell_udc *dev,
 	}
 
 	/* report disconnect; the driver is already quiesced */
-	if (driver) {
+	if (dev->driver) {
 		spin_unlock(&dev->lock);
-		driver->disconnect(&dev->gadget);
+		dev->driver->disconnect(&dev->gadget);
 		spin_lock(&dev->lock);
 	}
 
@@ -1925,11 +1919,10 @@ static int langwell_stop(struct usb_gadget *g,
 
 	/* stop all usb activities */
 	dev->gadget.speed = USB_SPEED_UNKNOWN;
-	stop_activity(dev, driver);
-	spin_unlock_irqrestore(&dev->lock, flags);
-
 	dev->gadget.dev.driver = NULL;
 	dev->driver = NULL;
+	stop_activity(dev);
+	spin_unlock_irqrestore(&dev->lock, flags);
 
 	device_remove_file(&dev->pdev->dev, &dev_attr_function);
 
@@ -2315,13 +2308,9 @@ static void handle_setup_packet(struct langwell_udc *dev,
 
 			if (!gadget_is_otg(&dev->gadget))
 				break;
-			else if (setup->bRequest == USB_DEVICE_B_HNP_ENABLE) {
+			else if (setup->bRequest == USB_DEVICE_B_HNP_ENABLE)
 				dev->gadget.b_hnp_enable = 1;
-#ifdef	OTG_TRANSCEIVER
-				if (!dev->lotg->otg.default_a)
-					dev->lotg->hsm.b_hnp_enable = 1;
-#endif
-			} else if (setup->bRequest == USB_DEVICE_A_HNP_SUPPORT)
+			else if (setup->bRequest == USB_DEVICE_A_HNP_SUPPORT)
 				dev->gadget.a_hnp_support = 1;
 			else if (setup->bRequest ==
 					USB_DEVICE_A_ALT_HNP_SUPPORT)
@@ -2733,7 +2722,7 @@ static void handle_usb_reset(struct langwell_udc *dev)
 		dev->bus_reset = 1;
 
 		/* reset all the queues, stop all USB activities */
-		stop_activity(dev, dev->driver);
+		stop_activity(dev);
 		dev->usb_state = USB_STATE_DEFAULT;
 	} else {
 		dev_vdbg(&dev->pdev->dev, "device controller reset\n");
@@ -2741,7 +2730,7 @@ static void handle_usb_reset(struct langwell_udc *dev)
 		langwell_udc_reset(dev);
 
 		/* reset all the queues, stop all USB activities */
-		stop_activity(dev, dev->driver);
+		stop_activity(dev);
 
 		/* reset ep0 dQH and endptctrl */
 		ep0_reset(dev);
@@ -2752,12 +2741,6 @@ static void handle_usb_reset(struct langwell_udc *dev)
 		dev->usb_state = USB_STATE_ATTACHED;
 	}
 
-#ifdef	OTG_TRANSCEIVER
-	/* refer to USB OTG 6.6.2.3 b_hnp_en is cleared */
-	if (!dev->lotg->otg.default_a)
-		dev->lotg->hsm.b_hnp_enable = 0;
-#endif
-
 	dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
 }
 
@@ -2770,29 +2753,6 @@ static void handle_bus_suspend(struct langwell_udc *dev)
 	dev->resume_state = dev->usb_state;
 	dev->usb_state = USB_STATE_SUSPENDED;
 
-#ifdef	OTG_TRANSCEIVER
-	if (dev->lotg->otg.default_a) {
-		if (dev->lotg->hsm.b_bus_suspend_vld == 1) {
-			dev->lotg->hsm.b_bus_suspend = 1;
-			/* notify transceiver the state changes */
-			if (spin_trylock(&dev->lotg->wq_lock)) {
-				langwell_update_transceiver();
-				spin_unlock(&dev->lotg->wq_lock);
-			}
-		}
-		dev->lotg->hsm.b_bus_suspend_vld++;
-	} else {
-		if (!dev->lotg->hsm.a_bus_suspend) {
-			dev->lotg->hsm.a_bus_suspend = 1;
-			/* notify transceiver the state changes */
-			if (spin_trylock(&dev->lotg->wq_lock)) {
-				langwell_update_transceiver();
-				spin_unlock(&dev->lotg->wq_lock);
-			}
-		}
-	}
-#endif
-
 	/* report suspend to the driver */
 	if (dev->driver) {
 		if (dev->driver->suspend) {
@@ -2823,11 +2783,6 @@ static void handle_bus_resume(struct langwell_udc *dev)
 	if (dev->pdev->device != 0x0829)
 		langwell_phy_low_power(dev, 0);
 
-#ifdef	OTG_TRANSCEIVER
-	if (dev->lotg->otg.default_a == 0)
-		dev->lotg->hsm.a_bus_suspend = 0;
-#endif
-
 	/* report resume to the driver */
 	if (dev->driver) {
 		if (dev->driver->resume) {
@@ -3020,7 +2975,6 @@ static void langwell_udc_remove(struct pci_dev *pdev)
 
 	dev->done = &done;
 
-#ifndef	OTG_TRANSCEIVER
 	/* free dTD dma_pool and dQH */
 	if (dev->dtd_pool)
 		dma_pool_destroy(dev->dtd_pool);
@@ -3032,7 +2986,6 @@ static void langwell_udc_remove(struct pci_dev *pdev)
 	/* release SRAM caching */
 	if (dev->has_sram && dev->got_sram)
 		sram_deinit(dev);
-#endif
 
 	if (dev->status_req) {
 		kfree(dev->status_req->req.buf);
@@ -3045,7 +2998,6 @@ static void langwell_udc_remove(struct pci_dev *pdev)
 	if (dev->got_irq)
 		free_irq(pdev->irq, dev);
 
-#ifndef	OTG_TRANSCEIVER
 	if (dev->cap_regs)
 		iounmap(dev->cap_regs);
 
@@ -3055,13 +3007,6 @@ static void langwell_udc_remove(struct pci_dev *pdev)
 
 	if (dev->enabled)
 		pci_disable_device(pdev);
-#else
-	if (dev->transceiver) {
-		otg_put_transceiver(dev->transceiver);
-		dev->transceiver = NULL;
-		dev->lotg = NULL;
-	}
-#endif
 
 	dev->cap_regs = NULL;
 
@@ -3072,9 +3017,7 @@ static void langwell_udc_remove(struct pci_dev *pdev)
 	device_remove_file(&pdev->dev, &dev_attr_langwell_udc);
 	device_remove_file(&pdev->dev, &dev_attr_remote_wakeup);
 
-#ifndef	OTG_TRANSCEIVER
 	pci_set_drvdata(pdev, NULL);
-#endif
 
 	/* free dev, wait for the release() finished */
 	wait_for_completion(&done);
@@ -3089,9 +3032,7 @@ static int langwell_udc_probe(struct pci_dev *pdev,
 		const struct pci_device_id *id)
 {
 	struct langwell_udc	*dev;
-#ifndef	OTG_TRANSCEIVER
 	unsigned long		resource, len;
-#endif
 	void			__iomem *base = NULL;
 	size_t			size;
 	int			retval;
@@ -3109,16 +3050,6 @@ static int langwell_udc_probe(struct pci_dev *pdev,
 	dev->pdev = pdev;
 	dev_dbg(&dev->pdev->dev, "---> %s()\n", __func__);
 
-#ifdef	OTG_TRANSCEIVER
-	/* PCI device is already enabled by otg_transceiver driver */
-	dev->enabled = 1;
-
-	/* mem region and register base */
-	dev->region = 1;
-	dev->transceiver = otg_get_transceiver();
-	dev->lotg = otg_to_langwell(dev->transceiver);
-	base = dev->lotg->regs;
-#else
 	pci_set_drvdata(pdev, dev);
 
 	/* now all the pci goodies ... */
@@ -3139,7 +3070,6 @@ static int langwell_udc_probe(struct pci_dev *pdev,
 	dev->region = 1;
 
 	base = ioremap_nocache(resource, len);
-#endif
 	if (base == NULL) {
 		dev_err(&dev->pdev->dev, "can't map memory\n");
 		retval = -EFAULT;
@@ -3163,7 +3093,6 @@ static int langwell_udc_probe(struct pci_dev *pdev,
 	dev->got_sram = 0;
 	dev_vdbg(&dev->pdev->dev, "dev->has_sram: %d\n", dev->has_sram);
 
-#ifndef	OTG_TRANSCEIVER
 	/* enable SRAM caching if detected */
 	if (dev->has_sram && !dev->got_sram)
 		sram_init(dev);
@@ -3182,7 +3111,6 @@ static int langwell_udc_probe(struct pci_dev *pdev,
 		goto error;
 	}
 	dev->got_irq = 1;
-#endif
 
 	/* set stopped bit */
 	dev->stopped = 1;
@@ -3257,10 +3185,8 @@ static int langwell_udc_probe(struct pci_dev *pdev,
 	dev->remote_wakeup = 0;
 	dev->dev_status = 1 << USB_DEVICE_SELF_POWERED;
 
-#ifndef	OTG_TRANSCEIVER
 	/* reset device controller */
 	langwell_udc_reset(dev);
-#endif
 
 	/* initialize gadget structure */
 	dev->gadget.ops = &langwell_ops;	/* usb_gadget_ops */
@@ -3268,9 +3194,6 @@ static int langwell_udc_probe(struct pci_dev *pdev,
 	INIT_LIST_HEAD(&dev->gadget.ep_list);	/* ep_list */
 	dev->gadget.speed = USB_SPEED_UNKNOWN;	/* speed */
 	dev->gadget.max_speed = USB_SPEED_HIGH;	/* support dual speed */
-#ifdef	OTG_TRANSCEIVER
-	dev->gadget.is_otg = 1;			/* support otg mode */
-#endif
 
 	/* the "gadget" abstracts/virtualizes the controller */
 	dev_set_name(&dev->gadget.dev, "gadget");
@@ -3282,10 +3205,8 @@ static int langwell_udc_probe(struct pci_dev *pdev,
 	/* controller endpoints reinit */
 	eps_reinit(dev);
 
-#ifndef	OTG_TRANSCEIVER
 	/* reset ep0 dQH and endptctrl */
 	ep0_reset(dev);
-#endif
 
 	/* create dTD dma_pool resource */
 	dev->dtd_pool = dma_pool_create("langwell_dtd",
@@ -3367,7 +3288,7 @@ static int langwell_udc_suspend(struct pci_dev *pdev, pm_message_t state)
 
 	spin_lock_irq(&dev->lock);
 	/* stop all usb activities */
-	stop_activity(dev, dev->driver);
+	stop_activity(dev);
 	spin_unlock_irq(&dev->lock);
 
 	/* free dTD dma_pool and dQH */
@@ -3525,22 +3446,14 @@ static struct pci_driver langwell_pci_driver = {
 
 static int __init init(void)
 {
-#ifdef	OTG_TRANSCEIVER
-	return langwell_register_peripheral(&langwell_pci_driver);
-#else
 	return pci_register_driver(&langwell_pci_driver);
-#endif
 }
 module_init(init);
 
 
 static void __exit cleanup(void)
 {
-#ifdef	OTG_TRANSCEIVER
-	return langwell_unregister_peripheral(&langwell_pci_driver);
-#else
 	pci_unregister_driver(&langwell_pci_driver);
-#endif
 }
 module_exit(cleanup);
 
diff --git a/drivers/usb/gadget/langwell_udc.h b/drivers/usb/gadget/langwell_udc.h
index ef79e242b7b..d6e78accaff 100644
--- a/drivers/usb/gadget/langwell_udc.h
+++ b/drivers/usb/gadget/langwell_udc.h
@@ -8,7 +8,6 @@
  */
 
 #include <linux/usb/langwell_udc.h>
-#include <linux/usb/langwell_otg.h>
 
 /*-------------------------------------------------------------------------*/
 
diff --git a/drivers/usb/gadget/storage_common.c b/drivers/usb/gadget/storage_common.c
index c7f291a331d..85ea14e2545 100644
--- a/drivers/usb/gadget/storage_common.c
+++ b/drivers/usb/gadget/storage_common.c
@@ -598,16 +598,16 @@ static __maybe_unused struct usb_ss_cap_descriptor fsg_ss_cap_desc = {
 		| USB_5GBPS_OPERATION),
 	.bFunctionalitySupport = USB_LOW_SPEED_OPERATION,
 	.bU1devExitLat =	USB_DEFAULT_U1_DEV_EXIT_LAT,
-	.bU2DevExitLat =	USB_DEFAULT_U2_DEV_EXIT_LAT,
+	.bU2DevExitLat =	cpu_to_le16(USB_DEFAULT_U2_DEV_EXIT_LAT),
 };
 
 static __maybe_unused struct usb_bos_descriptor fsg_bos_desc = {
 	.bLength =		USB_DT_BOS_SIZE,
 	.bDescriptorType =	USB_DT_BOS,
 
-	.wTotalLength =		USB_DT_BOS_SIZE
+	.wTotalLength =		cpu_to_le16(USB_DT_BOS_SIZE
 				+ USB_DT_USB_EXT_CAP_SIZE
-				+ USB_DT_USB_SS_CAP_SIZE,
+				+ USB_DT_USB_SS_CAP_SIZE),
 
 	.bNumDeviceCaps =	2,
 };
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index 91413cac97b..353cdd488b9 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -130,7 +130,7 @@ config USB_FSL_MPH_DR_OF
 	tristate
 
 config USB_EHCI_FSL
-	bool "Support for Freescale on-chip EHCI USB controller"
+	bool "Support for Freescale PPC on-chip EHCI USB controller"
 	depends on USB_EHCI_HCD && FSL_SOC
 	select USB_EHCI_ROOT_HUB_TT
 	select USB_FSL_MPH_DR_OF if OF
@@ -138,7 +138,7 @@ config USB_EHCI_FSL
 	  Variation of ARC USB block used in some Freescale chips.
 
 config USB_EHCI_MXC
-	bool "Support for Freescale on-chip EHCI USB controller"
+	bool "Support for Freescale i.MX on-chip EHCI USB controller"
 	depends on USB_EHCI_HCD && ARCH_MXC
 	select USB_EHCI_ROOT_HUB_TT
 	---help---
@@ -546,7 +546,7 @@ config USB_RENESAS_USBHS_HCD
 config USB_WHCI_HCD
 	tristate "Wireless USB Host Controller Interface (WHCI) driver (EXPERIMENTAL)"
 	depends on EXPERIMENTAL
-	depends on PCI && USB
+	depends on PCI && USB && UWB
 	select USB_WUSB
 	select UWB_WHCI
 	help
@@ -559,7 +559,7 @@ config USB_WHCI_HCD
 config USB_HWA_HCD
 	tristate "Host Wire Adapter (HWA) driver (EXPERIMENTAL)"
 	depends on EXPERIMENTAL
-	depends on USB
+	depends on USB && UWB
 	select USB_WUSB
 	select UWB_HWA
 	help
diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c
index e90344a1763..c26a82e83f6 100644
--- a/drivers/usb/host/ehci-fsl.c
+++ b/drivers/usb/host/ehci-fsl.c
@@ -125,7 +125,7 @@ static int usb_hcd_fsl_probe(const struct hc_driver *driver,
 	 */
 	if (pdata->init && pdata->init(pdev)) {
 		retval = -ENODEV;
-		goto err3;
+		goto err4;
 	}
 
 	/* Enable USB controller, 83xx or 8536 */
@@ -239,7 +239,7 @@ static void ehci_fsl_setup_phy(struct ehci_hcd *ehci,
 	ehci_writel(ehci, portsc, &ehci->regs->port_status[port_offset]);
 }
 
-static void ehci_fsl_usb_setup(struct ehci_hcd *ehci)
+static int ehci_fsl_usb_setup(struct ehci_hcd *ehci)
 {
 	struct usb_hcd *hcd = ehci_to_hcd(ehci);
 	struct fsl_usb2_platform_data *pdata;
@@ -299,12 +299,19 @@ static void ehci_fsl_usb_setup(struct ehci_hcd *ehci)
 #endif
 		out_be32(non_ehci + FSL_SOC_USB_SICTRL, 0x00000001);
 	}
+
+	if (!(in_be32(non_ehci + FSL_SOC_USB_CTRL) & CTRL_PHY_CLK_VALID)) {
+		printk(KERN_WARNING "fsl-ehci: USB PHY clock invalid\n");
+		return -ENODEV;
+	}
+	return 0;
 }
 
 /* called after powerup, by probe or system-pm "wakeup" */
 static int ehci_fsl_reinit(struct ehci_hcd *ehci)
 {
-	ehci_fsl_usb_setup(ehci);
+	if (ehci_fsl_usb_setup(ehci))
+		return -ENODEV;
 	ehci_port_power(ehci, 0);
 
 	return 0;
diff --git a/drivers/usb/host/ehci-fsl.h b/drivers/usb/host/ehci-fsl.h
index 49180622116..bdf43e2adc5 100644
--- a/drivers/usb/host/ehci-fsl.h
+++ b/drivers/usb/host/ehci-fsl.h
@@ -45,5 +45,6 @@
 #define FSL_SOC_USB_PRICTRL	0x40c	/* NOTE: big-endian */
 #define FSL_SOC_USB_SICTRL	0x410	/* NOTE: big-endian */
 #define FSL_SOC_USB_CTRL	0x500	/* NOTE: big-endian */
+#define CTRL_PHY_CLK_VALID	(1 << 17)
 #define SNOOP_SIZE_2GB		0x1e
 #endif				/* _EHCI_FSL_H */
diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c
index f4b627d343a..01bb7241d6e 100644
--- a/drivers/usb/host/ehci-pci.c
+++ b/drivers/usb/host/ehci-pci.c
@@ -276,6 +276,9 @@ static int ehci_pci_setup(struct usb_hcd *hcd)
 
 	/* Serial Bus Release Number is at PCI 0x60 offset */
 	pci_read_config_byte(pdev, 0x60, &ehci->sbrn);
+	if (pdev->vendor == PCI_VENDOR_ID_STMICRO
+	    && pdev->device == PCI_DEVICE_ID_STMICRO_USB_HOST)
+		ehci->sbrn = 0x20; /* ConneXT has no sbrn register */
 
 	/* Keep this around for a while just in case some EHCI
 	 * implementation uses legacy PCI PM support.  This test
@@ -526,6 +529,9 @@ static const struct pci_device_id pci_ids [] = { {
 	/* handle any USB 2.0 EHCI controller */
 	PCI_DEVICE_CLASS(PCI_CLASS_SERIAL_USB_EHCI, ~0),
 	.driver_data =	(unsigned long) &ehci_pci_hc_driver,
+	}, {
+	PCI_VDEVICE(STMICRO, PCI_DEVICE_ID_STMICRO_USB_HOST),
+	.driver_data = (unsigned long) &ehci_pci_hc_driver,
 	},
 	{ /* end: all zeroes */ }
 };
diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c
index 5df0b0e3392..77afabc77f9 100644
--- a/drivers/usb/host/ohci-at91.c
+++ b/drivers/usb/host/ohci-at91.c
@@ -139,8 +139,23 @@ static int usb_hcd_at91_probe(const struct hc_driver *driver,
 	}
 
 	iclk = clk_get(&pdev->dev, "ohci_clk");
+	if (IS_ERR(iclk)) {
+		dev_err(&pdev->dev, "failed to get ohci_clk\n");
+		retval = PTR_ERR(iclk);
+		goto err3;
+	}
 	fclk = clk_get(&pdev->dev, "uhpck");
+	if (IS_ERR(fclk)) {
+		dev_err(&pdev->dev, "failed to get uhpck\n");
+		retval = PTR_ERR(fclk);
+		goto err4;
+	}
 	hclk = clk_get(&pdev->dev, "hclk");
+	if (IS_ERR(hclk)) {
+		dev_err(&pdev->dev, "failed to get hclk\n");
+		retval = PTR_ERR(hclk);
+		goto err5;
+	}
 
 	at91_start_hc(pdev);
 	ohci_hcd_init(hcd_to_ohci(hcd));
@@ -153,9 +168,12 @@ static int usb_hcd_at91_probe(const struct hc_driver *driver,
 	at91_stop_hc(pdev);
 
 	clk_put(hclk);
+ err5:
 	clk_put(fclk);
+ err4:
 	clk_put(iclk);
 
+ err3:
 	iounmap(hcd->regs);
 
  err2:
@@ -226,7 +244,8 @@ static void ohci_at91_usb_set_power(struct at91_usbh_data *pdata, int port, int
 	if (!gpio_is_valid(pdata->vbus_pin[port]))
 		return;
 
-	gpio_set_value(pdata->vbus_pin[port], !pdata->vbus_pin_inverted ^ enable);
+	gpio_set_value(pdata->vbus_pin[port],
+		       !pdata->vbus_pin_active_low[port] ^ enable);
 }
 
 static int ohci_at91_usb_get_power(struct at91_usbh_data *pdata, int port)
@@ -237,7 +256,8 @@ static int ohci_at91_usb_get_power(struct at91_usbh_data *pdata, int port)
 	if (!gpio_is_valid(pdata->vbus_pin[port]))
 		return -EINVAL;
 
-	return gpio_get_value(pdata->vbus_pin[port]) ^ !pdata->vbus_pin_inverted;
+	return gpio_get_value(pdata->vbus_pin[port]) ^
+		!pdata->vbus_pin_active_low[port];
 }
 
 /*
diff --git a/drivers/usb/host/ohci-dbg.c b/drivers/usb/host/ohci-dbg.c
index 5179fcd73d8..e4bcb62b930 100644
--- a/drivers/usb/host/ohci-dbg.c
+++ b/drivers/usb/host/ohci-dbg.c
@@ -82,6 +82,14 @@ urb_print(struct urb * urb, char * str, int small, int status)
 		ohci_dbg(ohci,format, ## arg ); \
 	} while (0);
 
+/* Version for use where "next" is the address of a local variable */
+#define ohci_dbg_nosw(ohci, next, size, format, arg...) \
+	do { \
+		unsigned s_len; \
+		s_len = scnprintf(*next, *size, format, ## arg); \
+		*size -= s_len; *next += s_len; \
+	} while (0);
+
 
 static void ohci_dump_intr_mask (
 	struct ohci_hcd *ohci,
@@ -653,7 +661,7 @@ static ssize_t fill_registers_buffer(struct debug_buffer *buf)
 
 	/* dump driver info, then registers in spec order */
 
-	ohci_dbg_sw (ohci, &next, &size,
+	ohci_dbg_nosw(ohci, &next, &size,
 		"bus %s, device %s\n"
 		"%s\n"
 		"%s\n",
@@ -672,7 +680,7 @@ static ssize_t fill_registers_buffer(struct debug_buffer *buf)
 
 	/* hcca */
 	if (ohci->hcca)
-		ohci_dbg_sw (ohci, &next, &size,
+		ohci_dbg_nosw(ohci, &next, &size,
 			"hcca frame 0x%04x\n", ohci_frame_no(ohci));
 
 	/* other registers mostly affect frame timings */
diff --git a/drivers/usb/host/ohci-pci.c b/drivers/usb/host/ohci-pci.c
index 6109810cc2d..1843bb68ac7 100644
--- a/drivers/usb/host/ohci-pci.c
+++ b/drivers/usb/host/ohci-pci.c
@@ -397,6 +397,10 @@ static const struct pci_device_id pci_ids [] = { {
 	/* handle any USB OHCI controller */
 	PCI_DEVICE_CLASS(PCI_CLASS_SERIAL_USB_OHCI, ~0),
 	.driver_data =	(unsigned long) &ohci_pci_hc_driver,
+	}, {
+	/* The device in the ConneXT I/O hub has no class reg */
+	PCI_VDEVICE(STMICRO, PCI_DEVICE_ID_STMICRO_USB_OHCI),
+	.driver_data =	(unsigned long) &ohci_pci_hc_driver,
 	}, { /* end: all zeroes */ }
 };
 MODULE_DEVICE_TABLE (pci, pci_ids);
diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c
index caf87428ca4..7732d69e49e 100644
--- a/drivers/usb/host/pci-quirks.c
+++ b/drivers/usb/host/pci-quirks.c
@@ -867,6 +867,22 @@ hc_init:
 
 static void __devinit quirk_usb_early_handoff(struct pci_dev *pdev)
 {
+	/* Skip Netlogic mips SoC's internal PCI USB controller.
+	 * This device does not need/support EHCI/OHCI handoff
+	 */
+	if (pdev->vendor == 0x184e)	/* vendor Netlogic */
+		return;
+	if (pdev->class != PCI_CLASS_SERIAL_USB_UHCI &&
+			pdev->class != PCI_CLASS_SERIAL_USB_OHCI &&
+			pdev->class != PCI_CLASS_SERIAL_USB_EHCI &&
+			pdev->class != PCI_CLASS_SERIAL_USB_XHCI)
+		return;
+
+	if (pci_enable_device(pdev) < 0) {
+		dev_warn(&pdev->dev, "Can't enable PCI device, "
+				"BIOS handoff failed.\n");
+		return;
+	}
 	if (pdev->class == PCI_CLASS_SERIAL_USB_UHCI)
 		quirk_usb_handoff_uhci(pdev);
 	else if (pdev->class == PCI_CLASS_SERIAL_USB_OHCI)
@@ -875,5 +891,6 @@ static void __devinit quirk_usb_early_handoff(struct pci_dev *pdev)
 		quirk_usb_disable_ehci(pdev);
 	else if (pdev->class == PCI_CLASS_SERIAL_USB_XHCI)
 		quirk_usb_handoff_xhci(pdev);
+	pci_disable_device(pdev);
 }
 DECLARE_PCI_FIXUP_FINAL(PCI_ANY_ID, PCI_ANY_ID, quirk_usb_early_handoff);
diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c
index 35e257f79c7..557b6f32db8 100644
--- a/drivers/usb/host/xhci-hub.c
+++ b/drivers/usb/host/xhci-hub.c
@@ -93,7 +93,7 @@ static void xhci_usb2_hub_descriptor(struct usb_hcd *hcd, struct xhci_hcd *xhci,
 	 */
 	memset(port_removable, 0, sizeof(port_removable));
 	for (i = 0; i < ports; i++) {
-		portsc = xhci_readl(xhci, xhci->usb3_ports[i]);
+		portsc = xhci_readl(xhci, xhci->usb2_ports[i]);
 		/* If a device is removable, PORTSC reports a 0, same as in the
 		 * hub descriptor DeviceRemovable bits.
 		 */
diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
index 36cbe2226a4..383fc857491 100644
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -1126,26 +1126,42 @@ static unsigned int xhci_parse_exponent_interval(struct usb_device *udev,
 }
 
 /*
- * Convert bInterval expressed in frames (in 1-255 range) to exponent of
+ * Convert bInterval expressed in microframes (in 1-255 range) to exponent of
  * microframes, rounded down to nearest power of 2.
  */
-static unsigned int xhci_parse_frame_interval(struct usb_device *udev,
-		struct usb_host_endpoint *ep)
+static unsigned int xhci_microframes_to_exponent(struct usb_device *udev,
+		struct usb_host_endpoint *ep, unsigned int desc_interval,
+		unsigned int min_exponent, unsigned int max_exponent)
 {
 	unsigned int interval;
 
-	interval = fls(8 * ep->desc.bInterval) - 1;
-	interval = clamp_val(interval, 3, 10);
-	if ((1 << interval) != 8 * ep->desc.bInterval)
+	interval = fls(desc_interval) - 1;
+	interval = clamp_val(interval, min_exponent, max_exponent);
+	if ((1 << interval) != desc_interval)
 		dev_warn(&udev->dev,
 			 "ep %#x - rounding interval to %d microframes, ep desc says %d microframes\n",
 			 ep->desc.bEndpointAddress,
 			 1 << interval,
-			 8 * ep->desc.bInterval);
+			 desc_interval);
 
 	return interval;
 }
 
+static unsigned int xhci_parse_microframe_interval(struct usb_device *udev,
+		struct usb_host_endpoint *ep)
+{
+	return xhci_microframes_to_exponent(udev, ep,
+			ep->desc.bInterval, 0, 15);
+}
+
+
+static unsigned int xhci_parse_frame_interval(struct usb_device *udev,
+		struct usb_host_endpoint *ep)
+{
+	return xhci_microframes_to_exponent(udev, ep,
+			ep->desc.bInterval * 8, 3, 10);
+}
+
 /* Return the polling or NAK interval.
  *
  * The polling interval is expressed in "microframes".  If xHCI's Interval field
@@ -1164,7 +1180,7 @@ static unsigned int xhci_get_endpoint_interval(struct usb_device *udev,
 		/* Max NAK rate */
 		if (usb_endpoint_xfer_control(&ep->desc) ||
 		    usb_endpoint_xfer_bulk(&ep->desc)) {
-			interval = ep->desc.bInterval;
+			interval = xhci_parse_microframe_interval(udev, ep);
 			break;
 		}
 		/* Fall through - SS and HS isoc/int have same decoding */
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index b90e1386418..b62037bff68 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -1204,6 +1204,7 @@ static void handle_vendor_event(struct xhci_hcd *xhci,
  *
  * Returns a zero-based port number, which is suitable for indexing into each of
  * the split roothubs' port arrays and bus state arrays.
+ * Add one to it in order to call xhci_find_slot_id_by_port.
  */
 static unsigned int find_faked_portnum_from_hw_portnum(struct usb_hcd *hcd,
 		struct xhci_hcd *xhci, u32 port_id)
@@ -1324,7 +1325,7 @@ static void handle_port_status(struct xhci_hcd *xhci,
 			xhci_set_link_state(xhci, port_array, faked_port_index,
 						XDEV_U0);
 			slot_id = xhci_find_slot_id_by_port(hcd, xhci,
-					faked_port_index);
+					faked_port_index + 1);
 			if (!slot_id) {
 				xhci_dbg(xhci, "slot_id is zero\n");
 				goto cleanup;
@@ -3323,7 +3324,8 @@ static int xhci_queue_isoc_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
 		/* Check TD length */
 		if (running_total != td_len) {
 			xhci_err(xhci, "ISOC TD length unmatch\n");
-			return -EINVAL;
+			ret = -EINVAL;
+			goto cleanup;
 		}
 	}
 
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 6bbe3c3a711..c939f5fdef9 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -352,6 +352,11 @@ static int xhci_try_enable_msi(struct usb_hcd *hcd)
 		/* hcd->irq is -1, we have MSI */
 		return 0;
 
+	if (!pdev->irq) {
+		xhci_err(xhci, "No msi-x/msi found and no IRQ in BIOS\n");
+		return -EINVAL;
+	}
+
 	/* fall back to legacy interrupt*/
 	ret = request_irq(pdev->irq, &usb_hcd_irq, IRQF_SHARED,
 			hcd->irq_descr, hcd);
diff --git a/drivers/usb/misc/emi26.c b/drivers/usb/misc/emi26.c
index d9b6a035544..da97dcec1f3 100644
--- a/drivers/usb/misc/emi26.c
+++ b/drivers/usb/misc/emi26.c
@@ -37,9 +37,6 @@ static int emi26_set_reset(struct usb_device *dev, unsigned char reset_bit);
 static int emi26_load_firmware (struct usb_device *dev);
 static int emi26_probe(struct usb_interface *intf, const struct usb_device_id *id);
 static void emi26_disconnect(struct usb_interface *intf);
-static int __init emi26_init (void);
-static void __exit emi26_exit (void);
-
 
 /* thanks to drivers/usb/serial/keyspan_pda.c code */
 static int emi26_writememory (struct usb_device *dev, int address,
diff --git a/drivers/usb/misc/emi62.c b/drivers/usb/misc/emi62.c
index 9f39062ebb0..4e0f167a6c4 100644
--- a/drivers/usb/misc/emi62.c
+++ b/drivers/usb/misc/emi62.c
@@ -46,9 +46,6 @@ static int emi62_set_reset(struct usb_device *dev, unsigned char reset_bit);
 static int emi62_load_firmware (struct usb_device *dev);
 static int emi62_probe(struct usb_interface *intf, const struct usb_device_id *id);
 static void emi62_disconnect(struct usb_interface *intf);
-static int __init emi62_init (void);
-static void __exit emi62_exit (void);
-
 
 /* thanks to drivers/usb/serial/keyspan_pda.c code */
 static int emi62_writememory(struct usb_device *dev, int address,
diff --git a/drivers/usb/misc/usbsevseg.c b/drivers/usb/misc/usbsevseg.c
index 107bf13b1cf..b2d82b93739 100644
--- a/drivers/usb/misc/usbsevseg.c
+++ b/drivers/usb/misc/usbsevseg.c
@@ -24,7 +24,7 @@
 
 #define VENDOR_ID	0x0fc5
 #define PRODUCT_ID	0x1227
-#define MAXLEN		6
+#define MAXLEN		8
 
 /* table of devices that work with this driver */
 static const struct usb_device_id id_table[] = {
diff --git a/drivers/usb/musb/davinci.c b/drivers/usb/musb/davinci.c
index f9a3f62a83b..7c569f51212 100644
--- a/drivers/usb/musb/davinci.c
+++ b/drivers/usb/musb/davinci.c
@@ -33,9 +33,6 @@
 #include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
 
-#include <mach/hardware.h>
-#include <mach/memory.h>
-#include <asm/gpio.h>
 #include <mach/cputype.h>
 
 #include <asm/mach-types.h>
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index 56cf0243979..3d11cf64ebd 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -981,6 +981,9 @@ static void musb_shutdown(struct platform_device *pdev)
 	unsigned long	flags;
 
 	pm_runtime_get_sync(musb->controller);
+
+	musb_gadget_cleanup(musb);
+
 	spin_lock_irqsave(&musb->lock, flags);
 	musb_platform_disable(musb);
 	musb_generic_disable(musb);
@@ -1827,8 +1830,6 @@ static void musb_free(struct musb *musb)
 	sysfs_remove_group(&musb->controller->kobj, &musb_attr_group);
 #endif
 
-	musb_gadget_cleanup(musb);
-
 	if (musb->nIrq >= 0) {
 		if (musb->irq_wake)
 			disable_irq_wake(musb->nIrq);
diff --git a/drivers/usb/musb/musb_io.h b/drivers/usb/musb/musb_io.h
index e61aa95f2d2..1d5eda26fbd 100644
--- a/drivers/usb/musb/musb_io.h
+++ b/drivers/usb/musb/musb_io.h
@@ -39,7 +39,8 @@
 
 #if !defined(CONFIG_ARM) && !defined(CONFIG_SUPERH) \
 	&& !defined(CONFIG_AVR32) && !defined(CONFIG_PPC32) \
-	&& !defined(CONFIG_PPC64) && !defined(CONFIG_BLACKFIN)
+	&& !defined(CONFIG_PPC64) && !defined(CONFIG_BLACKFIN) \
+	&& !defined(CONFIG_MIPS)
 static inline void readsl(const void __iomem *addr, void *buf, int len)
 	{ insl((unsigned long)addr, buf, len); }
 static inline void readsw(const void __iomem *addr, void *buf, int len)
diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c
index c27bbbf32b5..df719eae3b0 100644
--- a/drivers/usb/musb/omap2430.c
+++ b/drivers/usb/musb/omap2430.c
@@ -222,7 +222,6 @@ static inline void omap2430_low_level_init(struct musb *musb)
 	musb_writel(musb->mregs, OTG_FORCESTDBY, l);
 }
 
-/* blocking notifier support */
 static int musb_otg_notifications(struct notifier_block *nb,
 		unsigned long event, void *unused)
 {
@@ -231,7 +230,7 @@ static int musb_otg_notifications(struct notifier_block *nb,
 	musb->xceiv_event = event;
 	schedule_work(&musb->otg_notifier_work);
 
-	return 0;
+	return NOTIFY_OK;
 }
 
 static void musb_otg_notifier_work(struct work_struct *data_notifier_work)
@@ -386,6 +385,7 @@ static void omap2430_musb_disable(struct musb *musb)
 static int omap2430_musb_exit(struct musb *musb)
 {
 	del_timer_sync(&musb_idle_timer);
+	cancel_work_sync(&musb->otg_notifier_work);
 
 	omap2430_low_level_exit(musb);
 	otg_put_transceiver(musb->xceiv);
diff --git a/drivers/usb/otg/Kconfig b/drivers/usb/otg/Kconfig
index 2a25955881f..735ef4c2339 100644
--- a/drivers/usb/otg/Kconfig
+++ b/drivers/usb/otg/Kconfig
@@ -86,20 +86,6 @@ config NOP_USB_XCEIV
 	  built-in with usb ip or which are autonomous and doesn't require any
 	  phy programming such as ISP1x04 etc.
 
-config USB_LANGWELL_OTG
-	tristate "Intel Langwell USB OTG dual-role support"
-	depends on USB && PCI && INTEL_SCU_IPC
-	select USB_OTG
-	select USB_OTG_UTILS
-	help
-	  Say Y here if you want to build Intel Langwell USB OTG
-	  transciever driver in kernel. This driver implements role
-	  switch between EHCI host driver and Langwell USB OTG
-	  client driver.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called langwell_otg.
-
 config USB_MSM_OTG
 	tristate "OTG support for Qualcomm on-chip USB controller"
 	depends on (USB || USB_GADGET) && ARCH_MSM
@@ -124,7 +110,7 @@ config AB8500_USB
 
 config FSL_USB2_OTG
 	bool "Freescale USB OTG Transceiver Driver"
-	depends on USB_EHCI_FSL && USB_GADGET_FSL_USB2
+	depends on USB_EHCI_FSL && USB_GADGET_FSL_USB2 && USB_SUSPEND
 	select USB_OTG
 	select USB_OTG_UTILS
 	help
@@ -132,7 +118,7 @@ config FSL_USB2_OTG
 
 config USB_MV_OTG
 	tristate "Marvell USB OTG support"
-	depends on USB_MV_UDC
+	depends on USB_EHCI_MV && USB_MV_UDC && USB_SUSPEND
 	select USB_OTG
 	select USB_OTG_UTILS
 	help
diff --git a/drivers/usb/otg/Makefile b/drivers/usb/otg/Makefile
index b2c5a959863..41aa5098b13 100644
--- a/drivers/usb/otg/Makefile
+++ b/drivers/usb/otg/Makefile
@@ -13,7 +13,6 @@ obj-$(CONFIG_USB_GPIO_VBUS)	+= gpio_vbus.o
 obj-$(CONFIG_ISP1301_OMAP)	+= isp1301_omap.o
 obj-$(CONFIG_TWL4030_USB)	+= twl4030-usb.o
 obj-$(CONFIG_TWL6030_USB)	+= twl6030-usb.o
-obj-$(CONFIG_USB_LANGWELL_OTG)	+= langwell_otg.o
 obj-$(CONFIG_NOP_USB_XCEIV)	+= nop-usb-xceiv.o
 obj-$(CONFIG_USB_ULPI)		+= ulpi.o
 obj-$(CONFIG_USB_ULPI_VIEWPORT)	+= ulpi_viewport.o
diff --git a/drivers/usb/otg/langwell_otg.c b/drivers/usb/otg/langwell_otg.c
deleted file mode 100644
index f08f784086f..00000000000
--- a/drivers/usb/otg/langwell_otg.c
+++ /dev/null
@@ -1,2347 +0,0 @@
-/*
- * Intel Langwell USB OTG transceiver driver
- * Copyright (C) 2008 - 2010, Intel Corporation.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
- *
- */
-/* This driver helps to switch Langwell OTG controller function between host
- * and peripheral. It works with EHCI driver and Langwell client controller
- * driver together.
- */
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <linux/errno.h>
-#include <linux/interrupt.h>
-#include <linux/kernel.h>
-#include <linux/device.h>
-#include <linux/moduleparam.h>
-#include <linux/usb/ch9.h>
-#include <linux/usb/gadget.h>
-#include <linux/usb.h>
-#include <linux/usb/otg.h>
-#include <linux/usb/hcd.h>
-#include <linux/notifier.h>
-#include <linux/delay.h>
-#include <asm/intel_scu_ipc.h>
-
-#include <linux/usb/langwell_otg.h>
-
-#define	DRIVER_DESC		"Intel Langwell USB OTG transceiver driver"
-#define	DRIVER_VERSION		"July 10, 2010"
-
-MODULE_DESCRIPTION(DRIVER_DESC);
-MODULE_AUTHOR("Henry Yuan <hang.yuan@intel.com>, Hao Wu <hao.wu@intel.com>");
-MODULE_VERSION(DRIVER_VERSION);
-MODULE_LICENSE("GPL");
-
-static const char driver_name[] = "langwell_otg";
-
-static int langwell_otg_probe(struct pci_dev *pdev,
-			const struct pci_device_id *id);
-static void langwell_otg_remove(struct pci_dev *pdev);
-static int langwell_otg_suspend(struct pci_dev *pdev, pm_message_t message);
-static int langwell_otg_resume(struct pci_dev *pdev);
-
-static int langwell_otg_set_host(struct otg_transceiver *otg,
-				struct usb_bus *host);
-static int langwell_otg_set_peripheral(struct otg_transceiver *otg,
-				struct usb_gadget *gadget);
-static int langwell_otg_start_srp(struct otg_transceiver *otg);
-
-static const struct pci_device_id pci_ids[] = {{
-	.class =        ((PCI_CLASS_SERIAL_USB << 8) | 0xfe),
-	.class_mask =   ~0,
-	.vendor =	0x8086,
-	.device =	0x0811,
-	.subvendor =	PCI_ANY_ID,
-	.subdevice =	PCI_ANY_ID,
-}, { /* end: all zeroes */ }
-};
-
-static struct pci_driver otg_pci_driver = {
-	.name =		(char *) driver_name,
-	.id_table =	pci_ids,
-
-	.probe =	langwell_otg_probe,
-	.remove =	langwell_otg_remove,
-
-	.suspend =	langwell_otg_suspend,
-	.resume =	langwell_otg_resume,
-};
-
-/* HSM timers */
-static inline struct langwell_otg_timer *otg_timer_initializer
-(void (*function)(unsigned long), unsigned long expires, unsigned long data)
-{
-	struct langwell_otg_timer *timer;
-	timer = kmalloc(sizeof(struct langwell_otg_timer), GFP_KERNEL);
-	if (timer == NULL)
-		return timer;
-
-	timer->function = function;
-	timer->expires = expires;
-	timer->data = data;
-	return timer;
-}
-
-static struct langwell_otg_timer *a_wait_vrise_tmr, *a_aidl_bdis_tmr,
-	*b_se0_srp_tmr, *b_srp_init_tmr;
-
-static struct list_head active_timers;
-
-static struct langwell_otg *the_transceiver;
-
-/* host/client notify transceiver when event affects HNP state */
-void langwell_update_transceiver(void)
-{
-	struct langwell_otg *lnw = the_transceiver;
-
-	dev_dbg(lnw->dev, "transceiver is updated\n");
-
-	if (!lnw->qwork)
-		return ;
-
-	queue_work(lnw->qwork, &lnw->work);
-}
-EXPORT_SYMBOL(langwell_update_transceiver);
-
-static int langwell_otg_set_host(struct otg_transceiver *otg,
-					struct usb_bus *host)
-{
-	otg->host = host;
-
-	return 0;
-}
-
-static int langwell_otg_set_peripheral(struct otg_transceiver *otg,
-					struct usb_gadget *gadget)
-{
-	otg->gadget = gadget;
-
-	return 0;
-}
-
-static int langwell_otg_set_power(struct otg_transceiver *otg,
-				unsigned mA)
-{
-	return 0;
-}
-
-/* A-device drives vbus, controlled through IPC commands */
-static int langwell_otg_set_vbus(struct otg_transceiver *otg, bool enabled)
-{
-	struct langwell_otg		*lnw = the_transceiver;
-	u8				sub_id;
-
-	dev_dbg(lnw->dev, "%s <--- %s\n", __func__, enabled ? "on" : "off");
-
-	if (enabled)
-		sub_id = 0x8; /* Turn on the VBus */
-	else
-		sub_id = 0x9; /* Turn off the VBus */
-
-	if (intel_scu_ipc_simple_command(0xef, sub_id)) {
-		dev_dbg(lnw->dev, "Failed to set Vbus via IPC commands\n");
-		return -EBUSY;
-	}
-
-	dev_dbg(lnw->dev, "%s --->\n", __func__);
-
-	return 0;
-}
-
-/* charge vbus or discharge vbus through a resistor to ground */
-static void langwell_otg_chrg_vbus(int on)
-{
-	struct langwell_otg	*lnw = the_transceiver;
-	u32	val;
-
-	val = readl(lnw->iotg.base + CI_OTGSC);
-
-	if (on)
-		writel((val & ~OTGSC_INTSTS_MASK) | OTGSC_VC,
-				lnw->iotg.base + CI_OTGSC);
-	else
-		writel((val & ~OTGSC_INTSTS_MASK) | OTGSC_VD,
-				lnw->iotg.base + CI_OTGSC);
-}
-
-/* Start SRP */
-static int langwell_otg_start_srp(struct otg_transceiver *otg)
-{
-	struct langwell_otg		*lnw = the_transceiver;
-	struct intel_mid_otg_xceiv	*iotg = &lnw->iotg;
-	u32				val;
-
-	dev_dbg(lnw->dev, "%s --->\n", __func__);
-
-	val = readl(iotg->base + CI_OTGSC);
-
-	writel((val & ~OTGSC_INTSTS_MASK) | OTGSC_HADP,
-				iotg->base + CI_OTGSC);
-
-	/* Check if the data plus is finished or not */
-	msleep(8);
-	val = readl(iotg->base + CI_OTGSC);
-	if (val & (OTGSC_HADP | OTGSC_DP))
-		dev_dbg(lnw->dev, "DataLine SRP Error\n");
-
-	/* Disable interrupt - b_sess_vld */
-	val = readl(iotg->base + CI_OTGSC);
-	val &= (~(OTGSC_BSVIE | OTGSC_BSEIE));
-	writel(val, iotg->base + CI_OTGSC);
-
-	/* Start VBus SRP, drive vbus to generate VBus pulse */
-	iotg->otg.set_vbus(&iotg->otg, true);
-	msleep(15);
-	iotg->otg.set_vbus(&iotg->otg, false);
-
-	/* Enable interrupt - b_sess_vld*/
-	val = readl(iotg->base + CI_OTGSC);
-	dev_dbg(lnw->dev, "after VBUS pulse otgsc = %x\n", val);
-
-	val |= (OTGSC_BSVIE | OTGSC_BSEIE);
-	writel(val, iotg->base + CI_OTGSC);
-
-	/* If Vbus is valid, then update the hsm */
-	if (val & OTGSC_BSV) {
-		dev_dbg(lnw->dev, "no b_sess_vld interrupt\n");
-
-		lnw->iotg.hsm.b_sess_vld = 1;
-		langwell_update_transceiver();
-	}
-
-	dev_dbg(lnw->dev, "%s <---\n", __func__);
-	return 0;
-}
-
-/* stop SOF via bus_suspend */
-static void langwell_otg_loc_sof(int on)
-{
-	struct langwell_otg	*lnw = the_transceiver;
-	struct usb_hcd		*hcd;
-	int			err;
-
-	dev_dbg(lnw->dev, "%s ---> %s\n", __func__, on ? "suspend" : "resume");
-
-	hcd = bus_to_hcd(lnw->iotg.otg.host);
-	if (on)
-		err = hcd->driver->bus_resume(hcd);
-	else
-		err = hcd->driver->bus_suspend(hcd);
-
-	if (err)
-		dev_dbg(lnw->dev, "Fail to resume/suspend USB bus - %d\n", err);
-
-	dev_dbg(lnw->dev, "%s <---\n", __func__);
-}
-
-static int langwell_otg_check_otgsc(void)
-{
-	struct langwell_otg		*lnw = the_transceiver;
-	u32				otgsc, usbcfg;
-
-	dev_dbg(lnw->dev, "check sync OTGSC and USBCFG registers\n");
-
-	otgsc = readl(lnw->iotg.base + CI_OTGSC);
-	usbcfg = readl(lnw->usbcfg);
-
-	dev_dbg(lnw->dev, "OTGSC = %08x, USBCFG = %08x\n",
-					otgsc, usbcfg);
-	dev_dbg(lnw->dev, "OTGSC_AVV = %d\n", !!(otgsc & OTGSC_AVV));
-	dev_dbg(lnw->dev, "USBCFG.VBUSVAL = %d\n",
-					!!(usbcfg & USBCFG_VBUSVAL));
-	dev_dbg(lnw->dev, "OTGSC_ASV = %d\n", !!(otgsc & OTGSC_ASV));
-	dev_dbg(lnw->dev, "USBCFG.AVALID = %d\n",
-					!!(usbcfg & USBCFG_AVALID));
-	dev_dbg(lnw->dev, "OTGSC_BSV = %d\n", !!(otgsc & OTGSC_BSV));
-	dev_dbg(lnw->dev, "USBCFG.BVALID = %d\n",
-					!!(usbcfg & USBCFG_BVALID));
-	dev_dbg(lnw->dev, "OTGSC_BSE = %d\n", !!(otgsc & OTGSC_BSE));
-	dev_dbg(lnw->dev, "USBCFG.SESEND = %d\n",
-					!!(usbcfg & USBCFG_SESEND));
-
-	/* Check USBCFG VBusValid/AValid/BValid/SessEnd */
-	if (!!(otgsc & OTGSC_AVV) ^ !!(usbcfg & USBCFG_VBUSVAL)) {
-		dev_dbg(lnw->dev, "OTGSC.AVV != USBCFG.VBUSVAL\n");
-		goto err;
-	}
-	if (!!(otgsc & OTGSC_ASV) ^ !!(usbcfg & USBCFG_AVALID)) {
-		dev_dbg(lnw->dev, "OTGSC.ASV != USBCFG.AVALID\n");
-		goto err;
-	}
-	if (!!(otgsc & OTGSC_BSV) ^ !!(usbcfg & USBCFG_BVALID)) {
-		dev_dbg(lnw->dev, "OTGSC.BSV != USBCFG.BVALID\n");
-		goto err;
-	}
-	if (!!(otgsc & OTGSC_BSE) ^ !!(usbcfg & USBCFG_SESEND)) {
-		dev_dbg(lnw->dev, "OTGSC.BSE != USBCFG.SESSEN\n");
-		goto err;
-	}
-
-	dev_dbg(lnw->dev, "OTGSC and USBCFG are synced\n");
-
-	return 0;
-
-err:
-	dev_warn(lnw->dev, "OTGSC isn't equal to USBCFG\n");
-	return -EPIPE;
-}
-
-
-static void langwell_otg_phy_low_power(int on)
-{
-	struct langwell_otg		*lnw = the_transceiver;
-	struct intel_mid_otg_xceiv	*iotg = &lnw->iotg;
-	u8				val, phcd;
-	int				retval;
-
-	dev_dbg(lnw->dev, "%s ---> %s mode\n",
-			__func__, on ? "Low power" : "Normal");
-
-	phcd = 0x40;
-
-	val = readb(iotg->base + CI_HOSTPC1 + 2);
-
-	if (on) {
-		/* Due to hardware issue, after set PHCD, sync will failed
-		 * between USBCFG and OTGSC, so before set PHCD, check if
-		 * sync is in process now. If the answer is "yes", then do
-		 * not touch PHCD bit */
-		retval = langwell_otg_check_otgsc();
-		if (retval) {
-			dev_dbg(lnw->dev, "Skip PHCD programming..\n");
-			return ;
-		}
-
-		writeb(val | phcd, iotg->base + CI_HOSTPC1 + 2);
-	} else
-		writeb(val & ~phcd, iotg->base + CI_HOSTPC1 + 2);
-
-	dev_dbg(lnw->dev, "%s <--- done\n", __func__);
-}
-
-/* After drv vbus, add 5 ms delay to set PHCD */
-static void langwell_otg_phy_low_power_wait(int on)
-{
-	struct langwell_otg	*lnw = the_transceiver;
-
-	dev_dbg(lnw->dev, "add 5ms delay before programing PHCD\n");
-
-	mdelay(5);
-	langwell_otg_phy_low_power(on);
-}
-
-/* Enable/Disable OTG interrupt */
-static void langwell_otg_intr(int on)
-{
-	struct langwell_otg		*lnw = the_transceiver;
-	struct intel_mid_otg_xceiv	*iotg = &lnw->iotg;
-	u32				val;
-
-	dev_dbg(lnw->dev, "%s ---> %s\n", __func__, on ? "on" : "off");
-
-	val = readl(iotg->base + CI_OTGSC);
-
-	/* OTGSC_INT_MASK doesn't contains 1msInt */
-	if (on) {
-		val = val | (OTGSC_INT_MASK);
-		writel(val, iotg->base + CI_OTGSC);
-	} else {
-		val = val & ~(OTGSC_INT_MASK);
-		writel(val, iotg->base + CI_OTGSC);
-	}
-
-	dev_dbg(lnw->dev, "%s <---\n", __func__);
-}
-
-/* set HAAR: Hardware Assist Auto-Reset */
-static void langwell_otg_HAAR(int on)
-{
-	struct langwell_otg		*lnw = the_transceiver;
-	struct intel_mid_otg_xceiv	*iotg = &lnw->iotg;
-	u32				val;
-
-	dev_dbg(lnw->dev, "%s ---> %s\n", __func__, on ? "on" : "off");
-
-	val = readl(iotg->base + CI_OTGSC);
-	if (on)
-		writel((val & ~OTGSC_INTSTS_MASK) | OTGSC_HAAR,
-					iotg->base + CI_OTGSC);
-	else
-		writel((val & ~OTGSC_INTSTS_MASK) & ~OTGSC_HAAR,
-					iotg->base + CI_OTGSC);
-
-	dev_dbg(lnw->dev, "%s <---\n", __func__);
-}
-
-/* set HABA: Hardware Assist B-Disconnect to A-Connect */
-static void langwell_otg_HABA(int on)
-{
-	struct langwell_otg		*lnw = the_transceiver;
-	struct intel_mid_otg_xceiv	*iotg = &lnw->iotg;
-	u32				val;
-
-	dev_dbg(lnw->dev, "%s ---> %s\n", __func__, on ? "on" : "off");
-
-	val = readl(iotg->base + CI_OTGSC);
-	if (on)
-		writel((val & ~OTGSC_INTSTS_MASK) | OTGSC_HABA,
-					iotg->base + CI_OTGSC);
-	else
-		writel((val & ~OTGSC_INTSTS_MASK) & ~OTGSC_HABA,
-					iotg->base + CI_OTGSC);
-
-	dev_dbg(lnw->dev, "%s <---\n", __func__);
-}
-
-static int langwell_otg_check_se0_srp(int on)
-{
-	struct langwell_otg	*lnw = the_transceiver;
-	int			delay_time = TB_SE0_SRP * 10;
-	u32			val;
-
-	dev_dbg(lnw->dev, "%s --->\n", __func__);
-
-	do {
-		udelay(100);
-		if (!delay_time--)
-			break;
-		val = readl(lnw->iotg.base + CI_PORTSC1);
-		val &= PORTSC_LS;
-	} while (!val);
-
-	dev_dbg(lnw->dev, "%s <---\n", __func__);
-	return val;
-}
-
-/* The timeout callback function to set time out bit */
-static void set_tmout(unsigned long indicator)
-{
-	*(int *)indicator = 1;
-}
-
-void langwell_otg_nsf_msg(unsigned long indicator)
-{
-	struct langwell_otg	*lnw = the_transceiver;
-
-	switch (indicator) {
-	case 2:
-	case 4:
-	case 6:
-	case 7:
-		dev_warn(lnw->dev,
-			"OTG:NSF-%lu - deivce not responding\n", indicator);
-		break;
-	case 3:
-		dev_warn(lnw->dev,
-			"OTG:NSF-%lu - deivce not supported\n", indicator);
-		break;
-	default:
-		dev_warn(lnw->dev, "Do not have this kind of NSF\n");
-		break;
-	}
-}
-
-/* Initialize timers */
-static int langwell_otg_init_timers(struct otg_hsm *hsm)
-{
-	/* HSM used timers */
-	a_wait_vrise_tmr = otg_timer_initializer(&set_tmout, TA_WAIT_VRISE,
-				(unsigned long)&hsm->a_wait_vrise_tmout);
-	if (a_wait_vrise_tmr == NULL)
-		return -ENOMEM;
-	a_aidl_bdis_tmr = otg_timer_initializer(&set_tmout, TA_AIDL_BDIS,
-				(unsigned long)&hsm->a_aidl_bdis_tmout);
-	if (a_aidl_bdis_tmr == NULL)
-		return -ENOMEM;
-	b_se0_srp_tmr = otg_timer_initializer(&set_tmout, TB_SE0_SRP,
-				(unsigned long)&hsm->b_se0_srp);
-	if (b_se0_srp_tmr == NULL)
-		return -ENOMEM;
-	b_srp_init_tmr = otg_timer_initializer(&set_tmout, TB_SRP_INIT,
-				(unsigned long)&hsm->b_srp_init_tmout);
-	if (b_srp_init_tmr == NULL)
-		return -ENOMEM;
-
-	return 0;
-}
-
-/* Free timers */
-static void langwell_otg_free_timers(void)
-{
-	kfree(a_wait_vrise_tmr);
-	kfree(a_aidl_bdis_tmr);
-	kfree(b_se0_srp_tmr);
-	kfree(b_srp_init_tmr);
-}
-
-/* The timeout callback function to set time out bit */
-static void langwell_otg_timer_fn(unsigned long indicator)
-{
-	struct langwell_otg *lnw = the_transceiver;
-
-	*(int *)indicator = 1;
-
-	dev_dbg(lnw->dev, "kernel timer - timeout\n");
-
-	langwell_update_transceiver();
-}
-
-/* kernel timer used instead of HW based interrupt */
-static void langwell_otg_add_ktimer(enum langwell_otg_timer_type timers)
-{
-	struct langwell_otg		*lnw = the_transceiver;
-	struct intel_mid_otg_xceiv	*iotg = &lnw->iotg;
-	unsigned long		j = jiffies;
-	unsigned long		data, time;
-
-	switch (timers) {
-	case TA_WAIT_VRISE_TMR:
-		iotg->hsm.a_wait_vrise_tmout = 0;
-		data = (unsigned long)&iotg->hsm.a_wait_vrise_tmout;
-		time = TA_WAIT_VRISE;
-		break;
-	case TA_WAIT_BCON_TMR:
-		iotg->hsm.a_wait_bcon_tmout = 0;
-		data = (unsigned long)&iotg->hsm.a_wait_bcon_tmout;
-		time = TA_WAIT_BCON;
-		break;
-	case TA_AIDL_BDIS_TMR:
-		iotg->hsm.a_aidl_bdis_tmout = 0;
-		data = (unsigned long)&iotg->hsm.a_aidl_bdis_tmout;
-		time = TA_AIDL_BDIS;
-		break;
-	case TB_ASE0_BRST_TMR:
-		iotg->hsm.b_ase0_brst_tmout = 0;
-		data = (unsigned long)&iotg->hsm.b_ase0_brst_tmout;
-		time = TB_ASE0_BRST;
-		break;
-	case TB_SRP_INIT_TMR:
-		iotg->hsm.b_srp_init_tmout = 0;
-		data = (unsigned long)&iotg->hsm.b_srp_init_tmout;
-		time = TB_SRP_INIT;
-		break;
-	case TB_SRP_FAIL_TMR:
-		iotg->hsm.b_srp_fail_tmout = 0;
-		data = (unsigned long)&iotg->hsm.b_srp_fail_tmout;
-		time = TB_SRP_FAIL;
-		break;
-	case TB_BUS_SUSPEND_TMR:
-		iotg->hsm.b_bus_suspend_tmout = 0;
-		data = (unsigned long)&iotg->hsm.b_bus_suspend_tmout;
-		time = TB_BUS_SUSPEND;
-		break;
-	default:
-		dev_dbg(lnw->dev, "unknown timer, cannot enable it\n");
-		return;
-	}
-
-	lnw->hsm_timer.data = data;
-	lnw->hsm_timer.function = langwell_otg_timer_fn;
-	lnw->hsm_timer.expires = j + time * HZ / 1000; /* milliseconds */
-
-	add_timer(&lnw->hsm_timer);
-
-	dev_dbg(lnw->dev, "add timer successfully\n");
-}
-
-/* Add timer to timer list */
-static void langwell_otg_add_timer(void *gtimer)
-{
-	struct langwell_otg_timer *timer = (struct langwell_otg_timer *)gtimer;
-	struct langwell_otg_timer *tmp_timer;
-	struct intel_mid_otg_xceiv *iotg = &the_transceiver->iotg;
-	u32	val32;
-
-	/* Check if the timer is already in the active list,
-	 * if so update timer count
-	 */
-	list_for_each_entry(tmp_timer, &active_timers, list)
-		if (tmp_timer == timer) {
-			timer->count = timer->expires;
-			return;
-		}
-	timer->count = timer->expires;
-
-	if (list_empty(&active_timers)) {
-		val32 = readl(iotg->base + CI_OTGSC);
-		writel(val32 | OTGSC_1MSE, iotg->base + CI_OTGSC);
-	}
-
-	list_add_tail(&timer->list, &active_timers);
-}
-
-/* Remove timer from the timer list; clear timeout status */
-static void langwell_otg_del_timer(void *gtimer)
-{
-	struct langwell_otg *lnw = the_transceiver;
-	struct langwell_otg_timer *timer = (struct langwell_otg_timer *)gtimer;
-	struct langwell_otg_timer *tmp_timer, *del_tmp;
-	u32 val32;
-
-	list_for_each_entry_safe(tmp_timer, del_tmp, &active_timers, list)
-		if (tmp_timer == timer)
-			list_del(&timer->list);
-
-	if (list_empty(&active_timers)) {
-		val32 = readl(lnw->iotg.base + CI_OTGSC);
-		writel(val32 & ~OTGSC_1MSE, lnw->iotg.base + CI_OTGSC);
-	}
-}
-
-/* Reduce timer count by 1, and find timeout conditions.*/
-static int langwell_otg_tick_timer(u32 *int_sts)
-{
-	struct langwell_otg	*lnw = the_transceiver;
-	struct langwell_otg_timer *tmp_timer, *del_tmp;
-	int expired = 0;
-
-	list_for_each_entry_safe(tmp_timer, del_tmp, &active_timers, list) {
-		tmp_timer->count--;
-		/* check if timer expires */
-		if (!tmp_timer->count) {
-			list_del(&tmp_timer->list);
-			tmp_timer->function(tmp_timer->data);
-			expired = 1;
-		}
-	}
-
-	if (list_empty(&active_timers)) {
-		dev_dbg(lnw->dev, "tick timer: disable 1ms int\n");
-		*int_sts = *int_sts & ~OTGSC_1MSE;
-	}
-	return expired;
-}
-
-static void reset_otg(void)
-{
-	struct langwell_otg	*lnw = the_transceiver;
-	int			delay_time = 1000;
-	u32			val;
-
-	dev_dbg(lnw->dev, "reseting OTG controller ...\n");
-	val = readl(lnw->iotg.base + CI_USBCMD);
-	writel(val | USBCMD_RST, lnw->iotg.base + CI_USBCMD);
-	do {
-		udelay(100);
-		if (!delay_time--)
-			dev_dbg(lnw->dev, "reset timeout\n");
-		val = readl(lnw->iotg.base + CI_USBCMD);
-		val &= USBCMD_RST;
-	} while (val != 0);
-	dev_dbg(lnw->dev, "reset done.\n");
-}
-
-static void set_host_mode(void)
-{
-	struct langwell_otg	*lnw = the_transceiver;
-	u32			val;
-
-	reset_otg();
-	val = readl(lnw->iotg.base + CI_USBMODE);
-	val = (val & (~USBMODE_CM)) | USBMODE_HOST;
-	writel(val, lnw->iotg.base + CI_USBMODE);
-}
-
-static void set_client_mode(void)
-{
-	struct langwell_otg	*lnw = the_transceiver;
-	u32			val;
-
-	reset_otg();
-	val = readl(lnw->iotg.base + CI_USBMODE);
-	val = (val & (~USBMODE_CM)) | USBMODE_DEVICE;
-	writel(val, lnw->iotg.base + CI_USBMODE);
-}
-
-static void init_hsm(void)
-{
-	struct langwell_otg		*lnw = the_transceiver;
-	struct intel_mid_otg_xceiv	*iotg = &lnw->iotg;
-	u32				val32;
-
-	/* read OTGSC after reset */
-	val32 = readl(lnw->iotg.base + CI_OTGSC);
-	dev_dbg(lnw->dev, "%s: OTGSC init value = 0x%x\n", __func__, val32);
-
-	/* set init state */
-	if (val32 & OTGSC_ID) {
-		iotg->hsm.id = 1;
-		iotg->otg.default_a = 0;
-		set_client_mode();
-		iotg->otg.state = OTG_STATE_B_IDLE;
-	} else {
-		iotg->hsm.id = 0;
-		iotg->otg.default_a = 1;
-		set_host_mode();
-		iotg->otg.state = OTG_STATE_A_IDLE;
-	}
-
-	/* set session indicator */
-	if (val32 & OTGSC_BSE)
-		iotg->hsm.b_sess_end = 1;
-	if (val32 & OTGSC_BSV)
-		iotg->hsm.b_sess_vld = 1;
-	if (val32 & OTGSC_ASV)
-		iotg->hsm.a_sess_vld = 1;
-	if (val32 & OTGSC_AVV)
-		iotg->hsm.a_vbus_vld = 1;
-
-	/* defautly power the bus */
-	iotg->hsm.a_bus_req = 1;
-	iotg->hsm.a_bus_drop = 0;
-	/* defautly don't request bus as B device */
-	iotg->hsm.b_bus_req = 0;
-	/* no system error */
-	iotg->hsm.a_clr_err = 0;
-
-	langwell_otg_phy_low_power_wait(1);
-}
-
-static void update_hsm(void)
-{
-	struct langwell_otg		*lnw = the_transceiver;
-	struct intel_mid_otg_xceiv	*iotg = &lnw->iotg;
-	u32				val32;
-
-	/* read OTGSC */
-	val32 = readl(lnw->iotg.base + CI_OTGSC);
-	dev_dbg(lnw->dev, "%s: OTGSC value = 0x%x\n", __func__, val32);
-
-	iotg->hsm.id = !!(val32 & OTGSC_ID);
-	iotg->hsm.b_sess_end = !!(val32 & OTGSC_BSE);
-	iotg->hsm.b_sess_vld = !!(val32 & OTGSC_BSV);
-	iotg->hsm.a_sess_vld = !!(val32 & OTGSC_ASV);
-	iotg->hsm.a_vbus_vld = !!(val32 & OTGSC_AVV);
-}
-
-static irqreturn_t otg_dummy_irq(int irq, void *_dev)
-{
-	struct langwell_otg	*lnw = the_transceiver;
-	void __iomem		*reg_base = _dev;
-	u32			val;
-	u32			int_mask = 0;
-
-	val = readl(reg_base + CI_USBMODE);
-	if ((val & USBMODE_CM) != USBMODE_DEVICE)
-		return IRQ_NONE;
-
-	val = readl(reg_base + CI_USBSTS);
-	int_mask = val & INTR_DUMMY_MASK;
-
-	if (int_mask == 0)
-		return IRQ_NONE;
-
-	/* clear hsm.b_conn here since host driver can't detect it
-	*  otg_dummy_irq called means B-disconnect happened.
-	*/
-	if (lnw->iotg.hsm.b_conn) {
-		lnw->iotg.hsm.b_conn = 0;
-		if (spin_trylock(&lnw->wq_lock)) {
-			langwell_update_transceiver();
-			spin_unlock(&lnw->wq_lock);
-		}
-	}
-
-	/* Clear interrupts */
-	writel(int_mask, reg_base + CI_USBSTS);
-	return IRQ_HANDLED;
-}
-
-static irqreturn_t otg_irq(int irq, void *_dev)
-{
-	struct langwell_otg		*lnw = _dev;
-	struct intel_mid_otg_xceiv	*iotg = &lnw->iotg;
-	u32				int_sts, int_en;
-	u32				int_mask = 0;
-	int				flag = 0;
-
-	int_sts = readl(lnw->iotg.base + CI_OTGSC);
-	int_en = (int_sts & OTGSC_INTEN_MASK) >> 8;
-	int_mask = int_sts & int_en;
-	if (int_mask == 0)
-		return IRQ_NONE;
-
-	if (int_mask & OTGSC_IDIS) {
-		dev_dbg(lnw->dev, "%s: id change int\n", __func__);
-		iotg->hsm.id = (int_sts & OTGSC_ID) ? 1 : 0;
-		dev_dbg(lnw->dev, "id = %d\n", iotg->hsm.id);
-		flag = 1;
-	}
-	if (int_mask & OTGSC_DPIS) {
-		dev_dbg(lnw->dev, "%s: data pulse int\n", __func__);
-		iotg->hsm.a_srp_det = (int_sts & OTGSC_DPS) ? 1 : 0;
-		dev_dbg(lnw->dev, "data pulse = %d\n", iotg->hsm.a_srp_det);
-		flag = 1;
-	}
-	if (int_mask & OTGSC_BSEIS) {
-		dev_dbg(lnw->dev, "%s: b session end int\n", __func__);
-		iotg->hsm.b_sess_end = (int_sts & OTGSC_BSE) ? 1 : 0;
-		dev_dbg(lnw->dev, "b_sess_end = %d\n", iotg->hsm.b_sess_end);
-		flag = 1;
-	}
-	if (int_mask & OTGSC_BSVIS) {
-		dev_dbg(lnw->dev, "%s: b session valid int\n", __func__);
-		iotg->hsm.b_sess_vld = (int_sts & OTGSC_BSV) ? 1 : 0;
-		dev_dbg(lnw->dev, "b_sess_vld = %d\n", iotg->hsm.b_sess_end);
-		flag = 1;
-	}
-	if (int_mask & OTGSC_ASVIS) {
-		dev_dbg(lnw->dev, "%s: a session valid int\n", __func__);
-		iotg->hsm.a_sess_vld = (int_sts & OTGSC_ASV) ? 1 : 0;
-		dev_dbg(lnw->dev, "a_sess_vld = %d\n", iotg->hsm.a_sess_vld);
-		flag = 1;
-	}
-	if (int_mask & OTGSC_AVVIS) {
-		dev_dbg(lnw->dev, "%s: a vbus valid int\n", __func__);
-		iotg->hsm.a_vbus_vld = (int_sts & OTGSC_AVV) ? 1 : 0;
-		dev_dbg(lnw->dev, "a_vbus_vld = %d\n", iotg->hsm.a_vbus_vld);
-		flag = 1;
-	}
-
-	if (int_mask & OTGSC_1MSS) {
-		/* need to schedule otg_work if any timer is expired */
-		if (langwell_otg_tick_timer(&int_sts))
-			flag = 1;
-	}
-
-	writel((int_sts & ~OTGSC_INTSTS_MASK) | int_mask,
-					lnw->iotg.base + CI_OTGSC);
-	if (flag)
-		langwell_update_transceiver();
-
-	return IRQ_HANDLED;
-}
-
-static int langwell_otg_iotg_notify(struct notifier_block *nb,
-				unsigned long action, void *data)
-{
-	struct langwell_otg		*lnw = the_transceiver;
-	struct intel_mid_otg_xceiv	*iotg = data;
-	int				flag = 0;
-
-	if (iotg == NULL)
-		return NOTIFY_BAD;
-
-	if (lnw == NULL)
-		return NOTIFY_BAD;
-
-	switch (action) {
-	case MID_OTG_NOTIFY_CONNECT:
-		dev_dbg(lnw->dev, "Lnw OTG Notify Connect Event\n");
-		if (iotg->otg.default_a == 1)
-			iotg->hsm.b_conn = 1;
-		else
-			iotg->hsm.a_conn = 1;
-		flag = 1;
-		break;
-	case MID_OTG_NOTIFY_DISCONN:
-		dev_dbg(lnw->dev, "Lnw OTG Notify Disconnect Event\n");
-		if (iotg->otg.default_a == 1)
-			iotg->hsm.b_conn = 0;
-		else
-			iotg->hsm.a_conn = 0;
-		flag = 1;
-		break;
-	case MID_OTG_NOTIFY_HSUSPEND:
-		dev_dbg(lnw->dev, "Lnw OTG Notify Host Bus suspend Event\n");
-		if (iotg->otg.default_a == 1)
-			iotg->hsm.a_suspend_req = 1;
-		else
-			iotg->hsm.b_bus_req = 0;
-		flag = 1;
-		break;
-	case MID_OTG_NOTIFY_HRESUME:
-		dev_dbg(lnw->dev, "Lnw OTG Notify Host Bus resume Event\n");
-		if (iotg->otg.default_a == 1)
-			iotg->hsm.b_bus_resume = 1;
-		flag = 1;
-		break;
-	case MID_OTG_NOTIFY_CSUSPEND:
-		dev_dbg(lnw->dev, "Lnw OTG Notify Client Bus suspend Event\n");
-		if (iotg->otg.default_a == 1) {
-			if (iotg->hsm.b_bus_suspend_vld == 2) {
-				iotg->hsm.b_bus_suspend = 1;
-				iotg->hsm.b_bus_suspend_vld = 0;
-				flag = 1;
-			} else {
-				iotg->hsm.b_bus_suspend_vld++;
-				flag = 0;
-			}
-		} else {
-			if (iotg->hsm.a_bus_suspend == 0) {
-				iotg->hsm.a_bus_suspend = 1;
-				flag = 1;
-			}
-		}
-		break;
-	case MID_OTG_NOTIFY_CRESUME:
-		dev_dbg(lnw->dev, "Lnw OTG Notify Client Bus resume Event\n");
-		if (iotg->otg.default_a == 0)
-			iotg->hsm.a_bus_suspend = 0;
-		flag = 0;
-		break;
-	case MID_OTG_NOTIFY_HOSTADD:
-		dev_dbg(lnw->dev, "Lnw OTG Nofity Host Driver Add\n");
-		flag = 1;
-		break;
-	case MID_OTG_NOTIFY_HOSTREMOVE:
-		dev_dbg(lnw->dev, "Lnw OTG Nofity Host Driver remove\n");
-		flag = 1;
-		break;
-	case MID_OTG_NOTIFY_CLIENTADD:
-		dev_dbg(lnw->dev, "Lnw OTG Nofity Client Driver Add\n");
-		flag = 1;
-		break;
-	case MID_OTG_NOTIFY_CLIENTREMOVE:
-		dev_dbg(lnw->dev, "Lnw OTG Nofity Client Driver remove\n");
-		flag = 1;
-		break;
-	default:
-		dev_dbg(lnw->dev, "Lnw OTG Nofity unknown notify message\n");
-		return NOTIFY_DONE;
-	}
-
-	if (flag)
-		langwell_update_transceiver();
-
-	return NOTIFY_OK;
-}
-
-static void langwell_otg_work(struct work_struct *work)
-{
-	struct langwell_otg		*lnw;
-	struct intel_mid_otg_xceiv	*iotg;
-	int				retval;
-	struct pci_dev			*pdev;
-
-	lnw = container_of(work, struct langwell_otg, work);
-	iotg = &lnw->iotg;
-	pdev = to_pci_dev(lnw->dev);
-
-	dev_dbg(lnw->dev, "%s: old state = %s\n", __func__,
-			otg_state_string(iotg->otg.state));
-
-	switch (iotg->otg.state) {
-	case OTG_STATE_UNDEFINED:
-	case OTG_STATE_B_IDLE:
-		if (!iotg->hsm.id) {
-			langwell_otg_del_timer(b_srp_init_tmr);
-			del_timer_sync(&lnw->hsm_timer);
-
-			iotg->otg.default_a = 1;
-			iotg->hsm.a_srp_det = 0;
-
-			langwell_otg_chrg_vbus(0);
-			set_host_mode();
-			langwell_otg_phy_low_power(1);
-
-			iotg->otg.state = OTG_STATE_A_IDLE;
-			langwell_update_transceiver();
-		} else if (iotg->hsm.b_sess_vld) {
-			langwell_otg_del_timer(b_srp_init_tmr);
-			del_timer_sync(&lnw->hsm_timer);
-			iotg->hsm.b_sess_end = 0;
-			iotg->hsm.a_bus_suspend = 0;
-			langwell_otg_chrg_vbus(0);
-
-			if (lnw->iotg.start_peripheral) {
-				lnw->iotg.start_peripheral(&lnw->iotg);
-				iotg->otg.state = OTG_STATE_B_PERIPHERAL;
-			} else
-				dev_dbg(lnw->dev, "client driver not loaded\n");
-
-		} else if (iotg->hsm.b_srp_init_tmout) {
-			iotg->hsm.b_srp_init_tmout = 0;
-			dev_warn(lnw->dev, "SRP init timeout\n");
-		} else if (iotg->hsm.b_srp_fail_tmout) {
-			iotg->hsm.b_srp_fail_tmout = 0;
-			iotg->hsm.b_bus_req = 0;
-
-			/* No silence failure */
-			langwell_otg_nsf_msg(6);
-		} else if (iotg->hsm.b_bus_req && iotg->hsm.b_sess_end) {
-			del_timer_sync(&lnw->hsm_timer);
-			/* workaround for b_se0_srp detection */
-			retval = langwell_otg_check_se0_srp(0);
-			if (retval) {
-				iotg->hsm.b_bus_req = 0;
-				dev_dbg(lnw->dev, "LS isn't SE0, try later\n");
-			} else {
-				/* clear the PHCD before start srp */
-				langwell_otg_phy_low_power(0);
-
-				/* Start SRP */
-				langwell_otg_add_timer(b_srp_init_tmr);
-				iotg->otg.start_srp(&iotg->otg);
-				langwell_otg_del_timer(b_srp_init_tmr);
-				langwell_otg_add_ktimer(TB_SRP_FAIL_TMR);
-
-				/* reset PHY low power mode here */
-				langwell_otg_phy_low_power_wait(1);
-			}
-		}
-		break;
-	case OTG_STATE_B_SRP_INIT:
-		if (!iotg->hsm.id) {
-			iotg->otg.default_a = 1;
-			iotg->hsm.a_srp_det = 0;
-
-			/* Turn off VBus */
-			iotg->otg.set_vbus(&iotg->otg, false);
-			langwell_otg_chrg_vbus(0);
-			set_host_mode();
-			langwell_otg_phy_low_power(1);
-			iotg->otg.state = OTG_STATE_A_IDLE;
-			langwell_update_transceiver();
-		} else if (iotg->hsm.b_sess_vld) {
-			langwell_otg_chrg_vbus(0);
-			if (lnw->iotg.start_peripheral) {
-				lnw->iotg.start_peripheral(&lnw->iotg);
-				iotg->otg.state = OTG_STATE_B_PERIPHERAL;
-			} else
-				dev_dbg(lnw->dev, "client driver not loaded\n");
-		}
-		break;
-	case OTG_STATE_B_PERIPHERAL:
-		if (!iotg->hsm.id) {
-			iotg->otg.default_a = 1;
-			iotg->hsm.a_srp_det = 0;
-
-			langwell_otg_chrg_vbus(0);
-
-			if (lnw->iotg.stop_peripheral)
-				lnw->iotg.stop_peripheral(&lnw->iotg);
-			else
-				dev_dbg(lnw->dev,
-					"client driver has been removed.\n");
-
-			set_host_mode();
-			langwell_otg_phy_low_power(1);
-			iotg->otg.state = OTG_STATE_A_IDLE;
-			langwell_update_transceiver();
-		} else if (!iotg->hsm.b_sess_vld) {
-			iotg->hsm.b_hnp_enable = 0;
-
-			if (lnw->iotg.stop_peripheral)
-				lnw->iotg.stop_peripheral(&lnw->iotg);
-			else
-				dev_dbg(lnw->dev,
-					"client driver has been removed.\n");
-
-			iotg->otg.state = OTG_STATE_B_IDLE;
-		} else if (iotg->hsm.b_bus_req && iotg->otg.gadget &&
-					iotg->otg.gadget->b_hnp_enable &&
-					iotg->hsm.a_bus_suspend) {
-
-			if (lnw->iotg.stop_peripheral)
-				lnw->iotg.stop_peripheral(&lnw->iotg);
-			else
-				dev_dbg(lnw->dev,
-					"client driver has been removed.\n");
-
-			langwell_otg_HAAR(1);
-			iotg->hsm.a_conn = 0;
-
-			if (lnw->iotg.start_host) {
-				lnw->iotg.start_host(&lnw->iotg);
-				iotg->otg.state = OTG_STATE_B_WAIT_ACON;
-			} else
-				dev_dbg(lnw->dev,
-						"host driver not loaded.\n");
-
-			iotg->hsm.a_bus_resume = 0;
-			langwell_otg_add_ktimer(TB_ASE0_BRST_TMR);
-		}
-		break;
-
-	case OTG_STATE_B_WAIT_ACON:
-		if (!iotg->hsm.id) {
-			/* delete hsm timer for b_ase0_brst_tmr */
-			del_timer_sync(&lnw->hsm_timer);
-
-			iotg->otg.default_a = 1;
-			iotg->hsm.a_srp_det = 0;
-
-			langwell_otg_chrg_vbus(0);
-
-			langwell_otg_HAAR(0);
-			if (lnw->iotg.stop_host)
-				lnw->iotg.stop_host(&lnw->iotg);
-			else
-				dev_dbg(lnw->dev,
-					"host driver has been removed.\n");
-
-			set_host_mode();
-			langwell_otg_phy_low_power(1);
-			iotg->otg.state = OTG_STATE_A_IDLE;
-			langwell_update_transceiver();
-		} else if (!iotg->hsm.b_sess_vld) {
-			/* delete hsm timer for b_ase0_brst_tmr */
-			del_timer_sync(&lnw->hsm_timer);
-
-			iotg->hsm.b_hnp_enable = 0;
-			iotg->hsm.b_bus_req = 0;
-
-			langwell_otg_chrg_vbus(0);
-			langwell_otg_HAAR(0);
-
-			if (lnw->iotg.stop_host)
-				lnw->iotg.stop_host(&lnw->iotg);
-			else
-				dev_dbg(lnw->dev,
-					"host driver has been removed.\n");
-
-			set_client_mode();
-			langwell_otg_phy_low_power(1);
-			iotg->otg.state = OTG_STATE_B_IDLE;
-		} else if (iotg->hsm.a_conn) {
-			/* delete hsm timer for b_ase0_brst_tmr */
-			del_timer_sync(&lnw->hsm_timer);
-
-			langwell_otg_HAAR(0);
-			iotg->otg.state = OTG_STATE_B_HOST;
-			langwell_update_transceiver();
-		} else if (iotg->hsm.a_bus_resume ||
-				iotg->hsm.b_ase0_brst_tmout) {
-			/* delete hsm timer for b_ase0_brst_tmr */
-			del_timer_sync(&lnw->hsm_timer);
-
-			langwell_otg_HAAR(0);
-			langwell_otg_nsf_msg(7);
-
-			if (lnw->iotg.stop_host)
-				lnw->iotg.stop_host(&lnw->iotg);
-			else
-				dev_dbg(lnw->dev,
-					"host driver has been removed.\n");
-
-			iotg->hsm.a_bus_suspend = 0;
-			iotg->hsm.b_bus_req = 0;
-
-			if (lnw->iotg.start_peripheral)
-				lnw->iotg.start_peripheral(&lnw->iotg);
-			else
-				dev_dbg(lnw->dev,
-					"client driver not loaded.\n");
-
-			iotg->otg.state = OTG_STATE_B_PERIPHERAL;
-		}
-		break;
-
-	case OTG_STATE_B_HOST:
-		if (!iotg->hsm.id) {
-			iotg->otg.default_a = 1;
-			iotg->hsm.a_srp_det = 0;
-
-			langwell_otg_chrg_vbus(0);
-
-			if (lnw->iotg.stop_host)
-				lnw->iotg.stop_host(&lnw->iotg);
-			else
-				dev_dbg(lnw->dev,
-					"host driver has been removed.\n");
-
-			set_host_mode();
-			langwell_otg_phy_low_power(1);
-			iotg->otg.state = OTG_STATE_A_IDLE;
-			langwell_update_transceiver();
-		} else if (!iotg->hsm.b_sess_vld) {
-			iotg->hsm.b_hnp_enable = 0;
-			iotg->hsm.b_bus_req = 0;
-
-			langwell_otg_chrg_vbus(0);
-			if (lnw->iotg.stop_host)
-				lnw->iotg.stop_host(&lnw->iotg);
-			else
-				dev_dbg(lnw->dev,
-					"host driver has been removed.\n");
-
-			set_client_mode();
-			langwell_otg_phy_low_power(1);
-			iotg->otg.state = OTG_STATE_B_IDLE;
-		} else if ((!iotg->hsm.b_bus_req) ||
-				(!iotg->hsm.a_conn)) {
-			iotg->hsm.b_bus_req = 0;
-			langwell_otg_loc_sof(0);
-
-			if (lnw->iotg.stop_host)
-				lnw->iotg.stop_host(&lnw->iotg);
-			else
-				dev_dbg(lnw->dev,
-					"host driver has been removed.\n");
-
-			iotg->hsm.a_bus_suspend = 0;
-
-			if (lnw->iotg.start_peripheral)
-				lnw->iotg.start_peripheral(&lnw->iotg);
-			else
-				dev_dbg(lnw->dev,
-						"client driver not loaded.\n");
-
-			iotg->otg.state = OTG_STATE_B_PERIPHERAL;
-		}
-		break;
-
-	case OTG_STATE_A_IDLE:
-		iotg->otg.default_a = 1;
-		if (iotg->hsm.id) {
-			iotg->otg.default_a = 0;
-			iotg->hsm.b_bus_req = 0;
-			iotg->hsm.vbus_srp_up = 0;
-
-			langwell_otg_chrg_vbus(0);
-			set_client_mode();
-			langwell_otg_phy_low_power(1);
-			iotg->otg.state = OTG_STATE_B_IDLE;
-			langwell_update_transceiver();
-		} else if (!iotg->hsm.a_bus_drop &&
-			(iotg->hsm.a_srp_det || iotg->hsm.a_bus_req)) {
-			langwell_otg_phy_low_power(0);
-
-			/* Turn on VBus */
-			iotg->otg.set_vbus(&iotg->otg, true);
-
-			iotg->hsm.vbus_srp_up = 0;
-			iotg->hsm.a_wait_vrise_tmout = 0;
-			langwell_otg_add_timer(a_wait_vrise_tmr);
-			iotg->otg.state = OTG_STATE_A_WAIT_VRISE;
-			langwell_update_transceiver();
-		} else if (!iotg->hsm.a_bus_drop && iotg->hsm.a_sess_vld) {
-			iotg->hsm.vbus_srp_up = 1;
-		} else if (!iotg->hsm.a_sess_vld && iotg->hsm.vbus_srp_up) {
-			msleep(10);
-			langwell_otg_phy_low_power(0);
-
-			/* Turn on VBus */
-			iotg->otg.set_vbus(&iotg->otg, true);
-			iotg->hsm.a_srp_det = 1;
-			iotg->hsm.vbus_srp_up = 0;
-			iotg->hsm.a_wait_vrise_tmout = 0;
-			langwell_otg_add_timer(a_wait_vrise_tmr);
-			iotg->otg.state = OTG_STATE_A_WAIT_VRISE;
-			langwell_update_transceiver();
-		} else if (!iotg->hsm.a_sess_vld &&
-				!iotg->hsm.vbus_srp_up) {
-			langwell_otg_phy_low_power(1);
-		}
-		break;
-	case OTG_STATE_A_WAIT_VRISE:
-		if (iotg->hsm.id) {
-			langwell_otg_del_timer(a_wait_vrise_tmr);
-			iotg->hsm.b_bus_req = 0;
-			iotg->otg.default_a = 0;
-
-			/* Turn off VBus */
-			iotg->otg.set_vbus(&iotg->otg, false);
-			set_client_mode();
-			langwell_otg_phy_low_power_wait(1);
-			iotg->otg.state = OTG_STATE_B_IDLE;
-		} else if (iotg->hsm.a_vbus_vld) {
-			langwell_otg_del_timer(a_wait_vrise_tmr);
-			iotg->hsm.b_conn = 0;
-			if (lnw->iotg.start_host)
-				lnw->iotg.start_host(&lnw->iotg);
-			else {
-				dev_dbg(lnw->dev, "host driver not loaded.\n");
-				break;
-			}
-
-			langwell_otg_add_ktimer(TA_WAIT_BCON_TMR);
-			iotg->otg.state = OTG_STATE_A_WAIT_BCON;
-		} else if (iotg->hsm.a_wait_vrise_tmout) {
-			iotg->hsm.b_conn = 0;
-			if (iotg->hsm.a_vbus_vld) {
-				if (lnw->iotg.start_host)
-					lnw->iotg.start_host(&lnw->iotg);
-				else {
-					dev_dbg(lnw->dev,
-						"host driver not loaded.\n");
-					break;
-				}
-				langwell_otg_add_ktimer(TA_WAIT_BCON_TMR);
-				iotg->otg.state = OTG_STATE_A_WAIT_BCON;
-			} else {
-
-				/* Turn off VBus */
-				iotg->otg.set_vbus(&iotg->otg, false);
-				langwell_otg_phy_low_power_wait(1);
-				iotg->otg.state = OTG_STATE_A_VBUS_ERR;
-			}
-		}
-		break;
-	case OTG_STATE_A_WAIT_BCON:
-		if (iotg->hsm.id) {
-			/* delete hsm timer for a_wait_bcon_tmr */
-			del_timer_sync(&lnw->hsm_timer);
-
-			iotg->otg.default_a = 0;
-			iotg->hsm.b_bus_req = 0;
-
-			if (lnw->iotg.stop_host)
-				lnw->iotg.stop_host(&lnw->iotg);
-			else
-				dev_dbg(lnw->dev,
-					"host driver has been removed.\n");
-
-			/* Turn off VBus */
-			iotg->otg.set_vbus(&iotg->otg, false);
-			set_client_mode();
-			langwell_otg_phy_low_power_wait(1);
-			iotg->otg.state = OTG_STATE_B_IDLE;
-			langwell_update_transceiver();
-		} else if (!iotg->hsm.a_vbus_vld) {
-			/* delete hsm timer for a_wait_bcon_tmr */
-			del_timer_sync(&lnw->hsm_timer);
-
-			if (lnw->iotg.stop_host)
-				lnw->iotg.stop_host(&lnw->iotg);
-			else
-				dev_dbg(lnw->dev,
-					"host driver has been removed.\n");
-
-			/* Turn off VBus */
-			iotg->otg.set_vbus(&iotg->otg, false);
-			langwell_otg_phy_low_power_wait(1);
-			iotg->otg.state = OTG_STATE_A_VBUS_ERR;
-		} else if (iotg->hsm.a_bus_drop ||
-				(iotg->hsm.a_wait_bcon_tmout &&
-				!iotg->hsm.a_bus_req)) {
-			/* delete hsm timer for a_wait_bcon_tmr */
-			del_timer_sync(&lnw->hsm_timer);
-
-			if (lnw->iotg.stop_host)
-				lnw->iotg.stop_host(&lnw->iotg);
-			else
-				dev_dbg(lnw->dev,
-					"host driver has been removed.\n");
-
-			/* Turn off VBus */
-			iotg->otg.set_vbus(&iotg->otg, false);
-			iotg->otg.state = OTG_STATE_A_WAIT_VFALL;
-		} else if (iotg->hsm.b_conn) {
-			/* delete hsm timer for a_wait_bcon_tmr */
-			del_timer_sync(&lnw->hsm_timer);
-
-			iotg->hsm.a_suspend_req = 0;
-			iotg->otg.state = OTG_STATE_A_HOST;
-			if (iotg->hsm.a_srp_det && iotg->otg.host &&
-					!iotg->otg.host->b_hnp_enable) {
-				/* SRP capable peripheral-only device */
-				iotg->hsm.a_bus_req = 1;
-				iotg->hsm.a_srp_det = 0;
-			} else if (!iotg->hsm.a_bus_req && iotg->otg.host &&
-					iotg->otg.host->b_hnp_enable) {
-				/* It is not safe enough to do a fast
-				 * transition from A_WAIT_BCON to
-				 * A_SUSPEND */
-				msleep(10000);
-				if (iotg->hsm.a_bus_req)
-					break;
-
-				if (request_irq(pdev->irq,
-					otg_dummy_irq, IRQF_SHARED,
-					driver_name, iotg->base) != 0) {
-					dev_dbg(lnw->dev,
-						"request interrupt %d fail\n",
-						pdev->irq);
-				}
-
-				langwell_otg_HABA(1);
-				iotg->hsm.b_bus_resume = 0;
-				iotg->hsm.a_aidl_bdis_tmout = 0;
-
-				langwell_otg_loc_sof(0);
-				/* clear PHCD to enable HW timer */
-				langwell_otg_phy_low_power(0);
-				langwell_otg_add_timer(a_aidl_bdis_tmr);
-				iotg->otg.state = OTG_STATE_A_SUSPEND;
-			} else if (!iotg->hsm.a_bus_req && iotg->otg.host &&
-				!iotg->otg.host->b_hnp_enable) {
-				if (lnw->iotg.stop_host)
-					lnw->iotg.stop_host(&lnw->iotg);
-				else
-					dev_dbg(lnw->dev,
-						"host driver removed.\n");
-
-				/* Turn off VBus */
-				iotg->otg.set_vbus(&iotg->otg, false);
-				iotg->otg.state = OTG_STATE_A_WAIT_VFALL;
-			}
-		}
-		break;
-	case OTG_STATE_A_HOST:
-		if (iotg->hsm.id) {
-			iotg->otg.default_a = 0;
-			iotg->hsm.b_bus_req = 0;
-
-			if (lnw->iotg.stop_host)
-				lnw->iotg.stop_host(&lnw->iotg);
-			else
-				dev_dbg(lnw->dev,
-					"host driver has been removed.\n");
-
-			/* Turn off VBus */
-			iotg->otg.set_vbus(&iotg->otg, false);
-			set_client_mode();
-			langwell_otg_phy_low_power_wait(1);
-			iotg->otg.state = OTG_STATE_B_IDLE;
-			langwell_update_transceiver();
-		} else if (iotg->hsm.a_bus_drop ||
-				(iotg->otg.host &&
-				!iotg->otg.host->b_hnp_enable &&
-					!iotg->hsm.a_bus_req)) {
-			if (lnw->iotg.stop_host)
-				lnw->iotg.stop_host(&lnw->iotg);
-			else
-				dev_dbg(lnw->dev,
-					"host driver has been removed.\n");
-
-			/* Turn off VBus */
-			iotg->otg.set_vbus(&iotg->otg, false);
-			iotg->otg.state = OTG_STATE_A_WAIT_VFALL;
-		} else if (!iotg->hsm.a_vbus_vld) {
-			if (lnw->iotg.stop_host)
-				lnw->iotg.stop_host(&lnw->iotg);
-			else
-				dev_dbg(lnw->dev,
-					"host driver has been removed.\n");
-
-			/* Turn off VBus */
-			iotg->otg.set_vbus(&iotg->otg, false);
-			langwell_otg_phy_low_power_wait(1);
-			iotg->otg.state = OTG_STATE_A_VBUS_ERR;
-		} else if (iotg->otg.host &&
-				iotg->otg.host->b_hnp_enable &&
-				!iotg->hsm.a_bus_req) {
-			/* Set HABA to enable hardware assistance to signal
-			 *  A-connect after receiver B-disconnect. Hardware
-			 *  will then set client mode and enable URE, SLE and
-			 *  PCE after the assistance. otg_dummy_irq is used to
-			 *  clean these ints when client driver is not resumed.
-			 */
-			if (request_irq(pdev->irq, otg_dummy_irq, IRQF_SHARED,
-					driver_name, iotg->base) != 0) {
-				dev_dbg(lnw->dev,
-					"request interrupt %d failed\n",
-						pdev->irq);
-			}
-
-			/* set HABA */
-			langwell_otg_HABA(1);
-			iotg->hsm.b_bus_resume = 0;
-			iotg->hsm.a_aidl_bdis_tmout = 0;
-			langwell_otg_loc_sof(0);
-			/* clear PHCD to enable HW timer */
-			langwell_otg_phy_low_power(0);
-			langwell_otg_add_timer(a_aidl_bdis_tmr);
-			iotg->otg.state = OTG_STATE_A_SUSPEND;
-		} else if (!iotg->hsm.b_conn || !iotg->hsm.a_bus_req) {
-			langwell_otg_add_ktimer(TA_WAIT_BCON_TMR);
-			iotg->otg.state = OTG_STATE_A_WAIT_BCON;
-		}
-		break;
-	case OTG_STATE_A_SUSPEND:
-		if (iotg->hsm.id) {
-			langwell_otg_del_timer(a_aidl_bdis_tmr);
-			langwell_otg_HABA(0);
-			free_irq(pdev->irq, iotg->base);
-			iotg->otg.default_a = 0;
-			iotg->hsm.b_bus_req = 0;
-
-			if (lnw->iotg.stop_host)
-				lnw->iotg.stop_host(&lnw->iotg);
-			else
-				dev_dbg(lnw->dev,
-					"host driver has been removed.\n");
-
-			/* Turn off VBus */
-			iotg->otg.set_vbus(&iotg->otg, false);
-			set_client_mode();
-			langwell_otg_phy_low_power(1);
-			iotg->otg.state = OTG_STATE_B_IDLE;
-			langwell_update_transceiver();
-		} else if (iotg->hsm.a_bus_req ||
-				iotg->hsm.b_bus_resume) {
-			langwell_otg_del_timer(a_aidl_bdis_tmr);
-			langwell_otg_HABA(0);
-			free_irq(pdev->irq, iotg->base);
-			iotg->hsm.a_suspend_req = 0;
-			langwell_otg_loc_sof(1);
-			iotg->otg.state = OTG_STATE_A_HOST;
-		} else if (iotg->hsm.a_aidl_bdis_tmout ||
-				iotg->hsm.a_bus_drop) {
-			langwell_otg_del_timer(a_aidl_bdis_tmr);
-			langwell_otg_HABA(0);
-			free_irq(pdev->irq, iotg->base);
-			if (lnw->iotg.stop_host)
-				lnw->iotg.stop_host(&lnw->iotg);
-			else
-				dev_dbg(lnw->dev,
-					"host driver has been removed.\n");
-
-			/* Turn off VBus */
-			iotg->otg.set_vbus(&iotg->otg, false);
-			iotg->otg.state = OTG_STATE_A_WAIT_VFALL;
-		} else if (!iotg->hsm.b_conn && iotg->otg.host &&
-				iotg->otg.host->b_hnp_enable) {
-			langwell_otg_del_timer(a_aidl_bdis_tmr);
-			langwell_otg_HABA(0);
-			free_irq(pdev->irq, iotg->base);
-
-			if (lnw->iotg.stop_host)
-				lnw->iotg.stop_host(&lnw->iotg);
-			else
-				dev_dbg(lnw->dev,
-					"host driver has been removed.\n");
-
-			iotg->hsm.b_bus_suspend = 0;
-			iotg->hsm.b_bus_suspend_vld = 0;
-
-			/* msleep(200); */
-			if (lnw->iotg.start_peripheral)
-				lnw->iotg.start_peripheral(&lnw->iotg);
-			else
-				dev_dbg(lnw->dev,
-					"client driver not loaded.\n");
-
-			langwell_otg_add_ktimer(TB_BUS_SUSPEND_TMR);
-			iotg->otg.state = OTG_STATE_A_PERIPHERAL;
-			break;
-		} else if (!iotg->hsm.a_vbus_vld) {
-			langwell_otg_del_timer(a_aidl_bdis_tmr);
-			langwell_otg_HABA(0);
-			free_irq(pdev->irq, iotg->base);
-			if (lnw->iotg.stop_host)
-				lnw->iotg.stop_host(&lnw->iotg);
-			else
-				dev_dbg(lnw->dev,
-					"host driver has been removed.\n");
-
-			/* Turn off VBus */
-			iotg->otg.set_vbus(&iotg->otg, false);
-			langwell_otg_phy_low_power_wait(1);
-			iotg->otg.state = OTG_STATE_A_VBUS_ERR;
-		}
-		break;
-	case OTG_STATE_A_PERIPHERAL:
-		if (iotg->hsm.id) {
-			/* delete hsm timer for b_bus_suspend_tmr */
-			del_timer_sync(&lnw->hsm_timer);
-			iotg->otg.default_a = 0;
-			iotg->hsm.b_bus_req = 0;
-			if (lnw->iotg.stop_peripheral)
-				lnw->iotg.stop_peripheral(&lnw->iotg);
-			else
-				dev_dbg(lnw->dev,
-					"client driver has been removed.\n");
-
-			/* Turn off VBus */
-			iotg->otg.set_vbus(&iotg->otg, false);
-			set_client_mode();
-			langwell_otg_phy_low_power_wait(1);
-			iotg->otg.state = OTG_STATE_B_IDLE;
-			langwell_update_transceiver();
-		} else if (!iotg->hsm.a_vbus_vld) {
-			/* delete hsm timer for b_bus_suspend_tmr */
-			del_timer_sync(&lnw->hsm_timer);
-
-			if (lnw->iotg.stop_peripheral)
-				lnw->iotg.stop_peripheral(&lnw->iotg);
-			else
-				dev_dbg(lnw->dev,
-					"client driver has been removed.\n");
-
-			/* Turn off VBus */
-			iotg->otg.set_vbus(&iotg->otg, false);
-			langwell_otg_phy_low_power_wait(1);
-			iotg->otg.state = OTG_STATE_A_VBUS_ERR;
-		} else if (iotg->hsm.a_bus_drop) {
-			/* delete hsm timer for b_bus_suspend_tmr */
-			del_timer_sync(&lnw->hsm_timer);
-
-			if (lnw->iotg.stop_peripheral)
-				lnw->iotg.stop_peripheral(&lnw->iotg);
-			else
-				dev_dbg(lnw->dev,
-					"client driver has been removed.\n");
-
-			/* Turn off VBus */
-			iotg->otg.set_vbus(&iotg->otg, false);
-			iotg->otg.state = OTG_STATE_A_WAIT_VFALL;
-		} else if (iotg->hsm.b_bus_suspend) {
-			/* delete hsm timer for b_bus_suspend_tmr */
-			del_timer_sync(&lnw->hsm_timer);
-
-			if (lnw->iotg.stop_peripheral)
-				lnw->iotg.stop_peripheral(&lnw->iotg);
-			else
-				dev_dbg(lnw->dev,
-					"client driver has been removed.\n");
-
-			if (lnw->iotg.start_host)
-				lnw->iotg.start_host(&lnw->iotg);
-			else
-				dev_dbg(lnw->dev,
-						"host driver not loaded.\n");
-			langwell_otg_add_ktimer(TA_WAIT_BCON_TMR);
-			iotg->otg.state = OTG_STATE_A_WAIT_BCON;
-		} else if (iotg->hsm.b_bus_suspend_tmout) {
-			u32	val;
-			val = readl(lnw->iotg.base + CI_PORTSC1);
-			if (!(val & PORTSC_SUSP))
-				break;
-
-			if (lnw->iotg.stop_peripheral)
-				lnw->iotg.stop_peripheral(&lnw->iotg);
-			else
-				dev_dbg(lnw->dev,
-					"client driver has been removed.\n");
-
-			if (lnw->iotg.start_host)
-				lnw->iotg.start_host(&lnw->iotg);
-			else
-				dev_dbg(lnw->dev,
-						"host driver not loaded.\n");
-			langwell_otg_add_ktimer(TA_WAIT_BCON_TMR);
-			iotg->otg.state = OTG_STATE_A_WAIT_BCON;
-		}
-		break;
-	case OTG_STATE_A_VBUS_ERR:
-		if (iotg->hsm.id) {
-			iotg->otg.default_a = 0;
-			iotg->hsm.a_clr_err = 0;
-			iotg->hsm.a_srp_det = 0;
-			set_client_mode();
-			langwell_otg_phy_low_power(1);
-			iotg->otg.state = OTG_STATE_B_IDLE;
-			langwell_update_transceiver();
-		} else if (iotg->hsm.a_clr_err) {
-			iotg->hsm.a_clr_err = 0;
-			iotg->hsm.a_srp_det = 0;
-			reset_otg();
-			init_hsm();
-			if (iotg->otg.state == OTG_STATE_A_IDLE)
-				langwell_update_transceiver();
-		} else {
-			/* FW will clear PHCD bit when any VBus
-			 * event detected. Reset PHCD to 1 again */
-			langwell_otg_phy_low_power(1);
-		}
-		break;
-	case OTG_STATE_A_WAIT_VFALL:
-		if (iotg->hsm.id) {
-			iotg->otg.default_a = 0;
-			set_client_mode();
-			langwell_otg_phy_low_power(1);
-			iotg->otg.state = OTG_STATE_B_IDLE;
-			langwell_update_transceiver();
-		} else if (iotg->hsm.a_bus_req) {
-
-			/* Turn on VBus */
-			iotg->otg.set_vbus(&iotg->otg, true);
-			iotg->hsm.a_wait_vrise_tmout = 0;
-			langwell_otg_add_timer(a_wait_vrise_tmr);
-			iotg->otg.state = OTG_STATE_A_WAIT_VRISE;
-		} else if (!iotg->hsm.a_sess_vld) {
-			iotg->hsm.a_srp_det = 0;
-			set_host_mode();
-			langwell_otg_phy_low_power(1);
-			iotg->otg.state = OTG_STATE_A_IDLE;
-		}
-		break;
-	default:
-		;
-	}
-
-	dev_dbg(lnw->dev, "%s: new state = %s\n", __func__,
-			otg_state_string(iotg->otg.state));
-}
-
-static ssize_t
-show_registers(struct device *_dev, struct device_attribute *attr, char *buf)
-{
-	struct langwell_otg	*lnw = the_transceiver;
-	char			*next;
-	unsigned		size, t;
-
-	next = buf;
-	size = PAGE_SIZE;
-
-	t = scnprintf(next, size,
-		"\n"
-		"USBCMD = 0x%08x\n"
-		"USBSTS = 0x%08x\n"
-		"USBINTR = 0x%08x\n"
-		"ASYNCLISTADDR = 0x%08x\n"
-		"PORTSC1 = 0x%08x\n"
-		"HOSTPC1 = 0x%08x\n"
-		"OTGSC = 0x%08x\n"
-		"USBMODE = 0x%08x\n",
-		readl(lnw->iotg.base + 0x30),
-		readl(lnw->iotg.base + 0x34),
-		readl(lnw->iotg.base + 0x38),
-		readl(lnw->iotg.base + 0x48),
-		readl(lnw->iotg.base + 0x74),
-		readl(lnw->iotg.base + 0xb4),
-		readl(lnw->iotg.base + 0xf4),
-		readl(lnw->iotg.base + 0xf8)
-	     );
-	size -= t;
-	next += t;
-
-	return PAGE_SIZE - size;
-}
-static DEVICE_ATTR(registers, S_IRUGO, show_registers, NULL);
-
-static ssize_t
-show_hsm(struct device *_dev, struct device_attribute *attr, char *buf)
-{
-	struct langwell_otg		*lnw = the_transceiver;
-	struct intel_mid_otg_xceiv	*iotg = &lnw->iotg;
-	char				*next;
-	unsigned			size, t;
-
-	next = buf;
-	size = PAGE_SIZE;
-
-	if (iotg->otg.host)
-		iotg->hsm.a_set_b_hnp_en = iotg->otg.host->b_hnp_enable;
-
-	if (iotg->otg.gadget)
-		iotg->hsm.b_hnp_enable = iotg->otg.gadget->b_hnp_enable;
-
-	t = scnprintf(next, size,
-		"\n"
-		"current state = %s\n"
-		"a_bus_resume = \t%d\n"
-		"a_bus_suspend = \t%d\n"
-		"a_conn = \t%d\n"
-		"a_sess_vld = \t%d\n"
-		"a_srp_det = \t%d\n"
-		"a_vbus_vld = \t%d\n"
-		"b_bus_resume = \t%d\n"
-		"b_bus_suspend = \t%d\n"
-		"b_conn = \t%d\n"
-		"b_se0_srp = \t%d\n"
-		"b_sess_end = \t%d\n"
-		"b_sess_vld = \t%d\n"
-		"id = \t%d\n"
-		"a_set_b_hnp_en = \t%d\n"
-		"b_srp_done = \t%d\n"
-		"b_hnp_enable = \t%d\n"
-		"a_wait_vrise_tmout = \t%d\n"
-		"a_wait_bcon_tmout = \t%d\n"
-		"a_aidl_bdis_tmout = \t%d\n"
-		"b_ase0_brst_tmout = \t%d\n"
-		"a_bus_drop = \t%d\n"
-		"a_bus_req = \t%d\n"
-		"a_clr_err = \t%d\n"
-		"a_suspend_req = \t%d\n"
-		"b_bus_req = \t%d\n"
-		"b_bus_suspend_tmout = \t%d\n"
-		"b_bus_suspend_vld = \t%d\n",
-		otg_state_string(iotg->otg.state),
-		iotg->hsm.a_bus_resume,
-		iotg->hsm.a_bus_suspend,
-		iotg->hsm.a_conn,
-		iotg->hsm.a_sess_vld,
-		iotg->hsm.a_srp_det,
-		iotg->hsm.a_vbus_vld,
-		iotg->hsm.b_bus_resume,
-		iotg->hsm.b_bus_suspend,
-		iotg->hsm.b_conn,
-		iotg->hsm.b_se0_srp,
-		iotg->hsm.b_sess_end,
-		iotg->hsm.b_sess_vld,
-		iotg->hsm.id,
-		iotg->hsm.a_set_b_hnp_en,
-		iotg->hsm.b_srp_done,
-		iotg->hsm.b_hnp_enable,
-		iotg->hsm.a_wait_vrise_tmout,
-		iotg->hsm.a_wait_bcon_tmout,
-		iotg->hsm.a_aidl_bdis_tmout,
-		iotg->hsm.b_ase0_brst_tmout,
-		iotg->hsm.a_bus_drop,
-		iotg->hsm.a_bus_req,
-		iotg->hsm.a_clr_err,
-		iotg->hsm.a_suspend_req,
-		iotg->hsm.b_bus_req,
-		iotg->hsm.b_bus_suspend_tmout,
-		iotg->hsm.b_bus_suspend_vld
-		);
-	size -= t;
-	next += t;
-
-	return PAGE_SIZE - size;
-}
-static DEVICE_ATTR(hsm, S_IRUGO, show_hsm, NULL);
-
-static ssize_t
-get_a_bus_req(struct device *dev, struct device_attribute *attr, char *buf)
-{
-	struct langwell_otg	*lnw = the_transceiver;
-	char			*next;
-	unsigned		size, t;
-
-	next = buf;
-	size = PAGE_SIZE;
-
-	t = scnprintf(next, size, "%d", lnw->iotg.hsm.a_bus_req);
-	size -= t;
-	next += t;
-
-	return PAGE_SIZE - size;
-}
-
-static ssize_t
-set_a_bus_req(struct device *dev, struct device_attribute *attr,
-		const char *buf, size_t count)
-{
-	struct langwell_otg		*lnw = the_transceiver;
-	struct intel_mid_otg_xceiv	*iotg = &lnw->iotg;
-
-	if (!iotg->otg.default_a)
-		return -1;
-	if (count > 2)
-		return -1;
-
-	if (buf[0] == '0') {
-		iotg->hsm.a_bus_req = 0;
-		dev_dbg(lnw->dev, "User request: a_bus_req = 0\n");
-	} else if (buf[0] == '1') {
-		/* If a_bus_drop is TRUE, a_bus_req can't be set */
-		if (iotg->hsm.a_bus_drop)
-			return -1;
-		iotg->hsm.a_bus_req = 1;
-		dev_dbg(lnw->dev, "User request: a_bus_req = 1\n");
-	}
-	if (spin_trylock(&lnw->wq_lock)) {
-		langwell_update_transceiver();
-		spin_unlock(&lnw->wq_lock);
-	}
-	return count;
-}
-static DEVICE_ATTR(a_bus_req, S_IRUGO | S_IWUSR, get_a_bus_req, set_a_bus_req);
-
-static ssize_t
-get_a_bus_drop(struct device *dev, struct device_attribute *attr, char *buf)
-{
-	struct langwell_otg	*lnw = the_transceiver;
-	char			*next;
-	unsigned		size, t;
-
-	next = buf;
-	size = PAGE_SIZE;
-
-	t = scnprintf(next, size, "%d", lnw->iotg.hsm.a_bus_drop);
-	size -= t;
-	next += t;
-
-	return PAGE_SIZE - size;
-}
-
-static ssize_t
-set_a_bus_drop(struct device *dev, struct device_attribute *attr,
-		const char *buf, size_t count)
-{
-	struct langwell_otg		*lnw = the_transceiver;
-	struct intel_mid_otg_xceiv	*iotg = &lnw->iotg;
-
-	if (!iotg->otg.default_a)
-		return -1;
-	if (count > 2)
-		return -1;
-
-	if (buf[0] == '0') {
-		iotg->hsm.a_bus_drop = 0;
-		dev_dbg(lnw->dev, "User request: a_bus_drop = 0\n");
-	} else if (buf[0] == '1') {
-		iotg->hsm.a_bus_drop = 1;
-		iotg->hsm.a_bus_req = 0;
-		dev_dbg(lnw->dev, "User request: a_bus_drop = 1\n");
-		dev_dbg(lnw->dev, "User request: and a_bus_req = 0\n");
-	}
-	if (spin_trylock(&lnw->wq_lock)) {
-		langwell_update_transceiver();
-		spin_unlock(&lnw->wq_lock);
-	}
-	return count;
-}
-static DEVICE_ATTR(a_bus_drop, S_IRUGO | S_IWUSR, get_a_bus_drop, set_a_bus_drop);
-
-static ssize_t
-get_b_bus_req(struct device *dev, struct device_attribute *attr, char *buf)
-{
-	struct langwell_otg	*lnw = the_transceiver;
-	char			*next;
-	unsigned		size, t;
-
-	next = buf;
-	size = PAGE_SIZE;
-
-	t = scnprintf(next, size, "%d", lnw->iotg.hsm.b_bus_req);
-	size -= t;
-	next += t;
-
-	return PAGE_SIZE - size;
-}
-
-static ssize_t
-set_b_bus_req(struct device *dev, struct device_attribute *attr,
-		const char *buf, size_t count)
-{
-	struct langwell_otg		*lnw = the_transceiver;
-	struct intel_mid_otg_xceiv	*iotg = &lnw->iotg;
-
-	if (iotg->otg.default_a)
-		return -1;
-
-	if (count > 2)
-		return -1;
-
-	if (buf[0] == '0') {
-		iotg->hsm.b_bus_req = 0;
-		dev_dbg(lnw->dev, "User request: b_bus_req = 0\n");
-	} else if (buf[0] == '1') {
-		iotg->hsm.b_bus_req = 1;
-		dev_dbg(lnw->dev, "User request: b_bus_req = 1\n");
-	}
-	if (spin_trylock(&lnw->wq_lock)) {
-		langwell_update_transceiver();
-		spin_unlock(&lnw->wq_lock);
-	}
-	return count;
-}
-static DEVICE_ATTR(b_bus_req, S_IRUGO | S_IWUSR, get_b_bus_req, set_b_bus_req);
-
-static ssize_t
-set_a_clr_err(struct device *dev, struct device_attribute *attr,
-		const char *buf, size_t count)
-{
-	struct langwell_otg		*lnw = the_transceiver;
-	struct intel_mid_otg_xceiv	*iotg = &lnw->iotg;
-
-	if (!iotg->otg.default_a)
-		return -1;
-	if (count > 2)
-		return -1;
-
-	if (buf[0] == '1') {
-		iotg->hsm.a_clr_err = 1;
-		dev_dbg(lnw->dev, "User request: a_clr_err = 1\n");
-	}
-	if (spin_trylock(&lnw->wq_lock)) {
-		langwell_update_transceiver();
-		spin_unlock(&lnw->wq_lock);
-	}
-	return count;
-}
-static DEVICE_ATTR(a_clr_err, S_IWUSR, NULL, set_a_clr_err);
-
-static struct attribute *inputs_attrs[] = {
-	&dev_attr_a_bus_req.attr,
-	&dev_attr_a_bus_drop.attr,
-	&dev_attr_b_bus_req.attr,
-	&dev_attr_a_clr_err.attr,
-	NULL,
-};
-
-static struct attribute_group debug_dev_attr_group = {
-	.name = "inputs",
-	.attrs = inputs_attrs,
-};
-
-static int langwell_otg_probe(struct pci_dev *pdev,
-		const struct pci_device_id *id)
-{
-	unsigned long		resource, len;
-	void __iomem		*base = NULL;
-	int			retval;
-	u32			val32;
-	struct langwell_otg	*lnw;
-	char			qname[] = "langwell_otg_queue";
-
-	retval = 0;
-	dev_dbg(&pdev->dev, "\notg controller is detected.\n");
-	if (pci_enable_device(pdev) < 0) {
-		retval = -ENODEV;
-		goto done;
-	}
-
-	lnw = kzalloc(sizeof *lnw, GFP_KERNEL);
-	if (lnw == NULL) {
-		retval = -ENOMEM;
-		goto done;
-	}
-	the_transceiver = lnw;
-
-	/* control register: BAR 0 */
-	resource = pci_resource_start(pdev, 0);
-	len = pci_resource_len(pdev, 0);
-	if (!request_mem_region(resource, len, driver_name)) {
-		retval = -EBUSY;
-		goto err;
-	}
-	lnw->region = 1;
-
-	base = ioremap_nocache(resource, len);
-	if (base == NULL) {
-		retval = -EFAULT;
-		goto err;
-	}
-	lnw->iotg.base = base;
-
-	if (!request_mem_region(USBCFG_ADDR, USBCFG_LEN, driver_name)) {
-		retval = -EBUSY;
-		goto err;
-	}
-	lnw->cfg_region = 1;
-
-	/* For the SCCB.USBCFG register */
-	base = ioremap_nocache(USBCFG_ADDR, USBCFG_LEN);
-	if (base == NULL) {
-		retval = -EFAULT;
-		goto err;
-	}
-	lnw->usbcfg = base;
-
-	if (!pdev->irq) {
-		dev_dbg(&pdev->dev, "No IRQ.\n");
-		retval = -ENODEV;
-		goto err;
-	}
-
-	lnw->qwork = create_singlethread_workqueue(qname);
-	if (!lnw->qwork) {
-		dev_dbg(&pdev->dev, "cannot create workqueue %s\n", qname);
-		retval = -ENOMEM;
-		goto err;
-	}
-	INIT_WORK(&lnw->work, langwell_otg_work);
-
-	/* OTG common part */
-	lnw->dev = &pdev->dev;
-	lnw->iotg.otg.dev = lnw->dev;
-	lnw->iotg.otg.label = driver_name;
-	lnw->iotg.otg.set_host = langwell_otg_set_host;
-	lnw->iotg.otg.set_peripheral = langwell_otg_set_peripheral;
-	lnw->iotg.otg.set_power = langwell_otg_set_power;
-	lnw->iotg.otg.set_vbus = langwell_otg_set_vbus;
-	lnw->iotg.otg.start_srp = langwell_otg_start_srp;
-	lnw->iotg.otg.state = OTG_STATE_UNDEFINED;
-
-	if (otg_set_transceiver(&lnw->iotg.otg)) {
-		dev_dbg(lnw->dev, "can't set transceiver\n");
-		retval = -EBUSY;
-		goto err;
-	}
-
-	reset_otg();
-	init_hsm();
-
-	spin_lock_init(&lnw->lock);
-	spin_lock_init(&lnw->wq_lock);
-	INIT_LIST_HEAD(&active_timers);
-	retval = langwell_otg_init_timers(&lnw->iotg.hsm);
-	if (retval) {
-		dev_dbg(&pdev->dev, "Failed to init timers\n");
-		goto err;
-	}
-
-	init_timer(&lnw->hsm_timer);
-	ATOMIC_INIT_NOTIFIER_HEAD(&lnw->iotg.iotg_notifier);
-
-	lnw->iotg_notifier.notifier_call = langwell_otg_iotg_notify;
-
-	retval = intel_mid_otg_register_notifier(&lnw->iotg,
-						&lnw->iotg_notifier);
-	if (retval) {
-		dev_dbg(lnw->dev, "Failed to register notifier\n");
-		goto err;
-	}
-
-	if (request_irq(pdev->irq, otg_irq, IRQF_SHARED,
-				driver_name, lnw) != 0) {
-		dev_dbg(lnw->dev, "request interrupt %d failed\n", pdev->irq);
-		retval = -EBUSY;
-		goto err;
-	}
-
-	/* enable OTGSC int */
-	val32 = OTGSC_DPIE | OTGSC_BSEIE | OTGSC_BSVIE |
-		OTGSC_ASVIE | OTGSC_AVVIE | OTGSC_IDIE | OTGSC_IDPU;
-	writel(val32, lnw->iotg.base + CI_OTGSC);
-
-	retval = device_create_file(&pdev->dev, &dev_attr_registers);
-	if (retval < 0) {
-		dev_dbg(lnw->dev,
-			"Can't register sysfs attribute: %d\n", retval);
-		goto err;
-	}
-
-	retval = device_create_file(&pdev->dev, &dev_attr_hsm);
-	if (retval < 0) {
-		dev_dbg(lnw->dev, "Can't hsm sysfs attribute: %d\n", retval);
-		goto err;
-	}
-
-	retval = sysfs_create_group(&pdev->dev.kobj, &debug_dev_attr_group);
-	if (retval < 0) {
-		dev_dbg(lnw->dev,
-			"Can't register sysfs attr group: %d\n", retval);
-		goto err;
-	}
-
-	if (lnw->iotg.otg.state == OTG_STATE_A_IDLE)
-		langwell_update_transceiver();
-
-	return 0;
-
-err:
-	if (the_transceiver)
-		langwell_otg_remove(pdev);
-done:
-	return retval;
-}
-
-static void langwell_otg_remove(struct pci_dev *pdev)
-{
-	struct langwell_otg *lnw = the_transceiver;
-
-	if (lnw->qwork) {
-		flush_workqueue(lnw->qwork);
-		destroy_workqueue(lnw->qwork);
-	}
-	intel_mid_otg_unregister_notifier(&lnw->iotg, &lnw->iotg_notifier);
-	langwell_otg_free_timers();
-
-	/* disable OTGSC interrupt as OTGSC doesn't change in reset */
-	writel(0, lnw->iotg.base + CI_OTGSC);
-
-	if (pdev->irq)
-		free_irq(pdev->irq, lnw);
-	if (lnw->usbcfg)
-		iounmap(lnw->usbcfg);
-	if (lnw->cfg_region)
-		release_mem_region(USBCFG_ADDR, USBCFG_LEN);
-	if (lnw->iotg.base)
-		iounmap(lnw->iotg.base);
-	if (lnw->region)
-		release_mem_region(pci_resource_start(pdev, 0),
-				pci_resource_len(pdev, 0));
-
-	otg_set_transceiver(NULL);
-	pci_disable_device(pdev);
-	sysfs_remove_group(&pdev->dev.kobj, &debug_dev_attr_group);
-	device_remove_file(&pdev->dev, &dev_attr_hsm);
-	device_remove_file(&pdev->dev, &dev_attr_registers);
-	kfree(lnw);
-	lnw = NULL;
-}
-
-static void transceiver_suspend(struct pci_dev *pdev)
-{
-	pci_save_state(pdev);
-	pci_set_power_state(pdev, PCI_D3hot);
-	langwell_otg_phy_low_power(1);
-}
-
-static int langwell_otg_suspend(struct pci_dev *pdev, pm_message_t message)
-{
-	struct langwell_otg		*lnw = the_transceiver;
-	struct intel_mid_otg_xceiv	*iotg = &lnw->iotg;
-	int				ret = 0;
-
-	/* Disbale OTG interrupts */
-	langwell_otg_intr(0);
-
-	if (pdev->irq)
-		free_irq(pdev->irq, lnw);
-
-	/* Prevent more otg_work */
-	flush_workqueue(lnw->qwork);
-	destroy_workqueue(lnw->qwork);
-	lnw->qwork = NULL;
-
-	/* start actions */
-	switch (iotg->otg.state) {
-	case OTG_STATE_A_WAIT_VFALL:
-		iotg->otg.state = OTG_STATE_A_IDLE;
-	case OTG_STATE_A_IDLE:
-	case OTG_STATE_B_IDLE:
-	case OTG_STATE_A_VBUS_ERR:
-		transceiver_suspend(pdev);
-		break;
-	case OTG_STATE_A_WAIT_VRISE:
-		langwell_otg_del_timer(a_wait_vrise_tmr);
-		iotg->hsm.a_srp_det = 0;
-
-		/* Turn off VBus */
-		iotg->otg.set_vbus(&iotg->otg, false);
-		iotg->otg.state = OTG_STATE_A_IDLE;
-		transceiver_suspend(pdev);
-		break;
-	case OTG_STATE_A_WAIT_BCON:
-		del_timer_sync(&lnw->hsm_timer);
-		if (lnw->iotg.stop_host)
-			lnw->iotg.stop_host(&lnw->iotg);
-		else
-			dev_dbg(&pdev->dev, "host driver has been removed.\n");
-
-		iotg->hsm.a_srp_det = 0;
-
-		/* Turn off VBus */
-		iotg->otg.set_vbus(&iotg->otg, false);
-		iotg->otg.state = OTG_STATE_A_IDLE;
-		transceiver_suspend(pdev);
-		break;
-	case OTG_STATE_A_HOST:
-		if (lnw->iotg.stop_host)
-			lnw->iotg.stop_host(&lnw->iotg);
-		else
-			dev_dbg(&pdev->dev, "host driver has been removed.\n");
-
-		iotg->hsm.a_srp_det = 0;
-
-		/* Turn off VBus */
-		iotg->otg.set_vbus(&iotg->otg, false);
-
-		iotg->otg.state = OTG_STATE_A_IDLE;
-		transceiver_suspend(pdev);
-		break;
-	case OTG_STATE_A_SUSPEND:
-		langwell_otg_del_timer(a_aidl_bdis_tmr);
-		langwell_otg_HABA(0);
-		if (lnw->iotg.stop_host)
-			lnw->iotg.stop_host(&lnw->iotg);
-		else
-			dev_dbg(lnw->dev, "host driver has been removed.\n");
-		iotg->hsm.a_srp_det = 0;
-
-		/* Turn off VBus */
-		iotg->otg.set_vbus(&iotg->otg, false);
-		iotg->otg.state = OTG_STATE_A_IDLE;
-		transceiver_suspend(pdev);
-		break;
-	case OTG_STATE_A_PERIPHERAL:
-		del_timer_sync(&lnw->hsm_timer);
-
-		if (lnw->iotg.stop_peripheral)
-			lnw->iotg.stop_peripheral(&lnw->iotg);
-		else
-			dev_dbg(&pdev->dev,
-				"client driver has been removed.\n");
-		iotg->hsm.a_srp_det = 0;
-
-		/* Turn off VBus */
-		iotg->otg.set_vbus(&iotg->otg, false);
-		iotg->otg.state = OTG_STATE_A_IDLE;
-		transceiver_suspend(pdev);
-		break;
-	case OTG_STATE_B_HOST:
-		if (lnw->iotg.stop_host)
-			lnw->iotg.stop_host(&lnw->iotg);
-		else
-			dev_dbg(&pdev->dev, "host driver has been removed.\n");
-		iotg->hsm.b_bus_req = 0;
-		iotg->otg.state = OTG_STATE_B_IDLE;
-		transceiver_suspend(pdev);
-		break;
-	case OTG_STATE_B_PERIPHERAL:
-		if (lnw->iotg.stop_peripheral)
-			lnw->iotg.stop_peripheral(&lnw->iotg);
-		else
-			dev_dbg(&pdev->dev,
-				"client driver has been removed.\n");
-		iotg->otg.state = OTG_STATE_B_IDLE;
-		transceiver_suspend(pdev);
-		break;
-	case OTG_STATE_B_WAIT_ACON:
-		/* delete hsm timer for b_ase0_brst_tmr */
-		del_timer_sync(&lnw->hsm_timer);
-
-		langwell_otg_HAAR(0);
-
-		if (lnw->iotg.stop_host)
-			lnw->iotg.stop_host(&lnw->iotg);
-		else
-			dev_dbg(&pdev->dev, "host driver has been removed.\n");
-		iotg->hsm.b_bus_req = 0;
-		iotg->otg.state = OTG_STATE_B_IDLE;
-		transceiver_suspend(pdev);
-		break;
-	default:
-		dev_dbg(lnw->dev, "error state before suspend\n");
-		break;
-	}
-
-	return ret;
-}
-
-static void transceiver_resume(struct pci_dev *pdev)
-{
-	pci_restore_state(pdev);
-	pci_set_power_state(pdev, PCI_D0);
-}
-
-static int langwell_otg_resume(struct pci_dev *pdev)
-{
-	struct langwell_otg	*lnw = the_transceiver;
-	int			ret = 0;
-
-	transceiver_resume(pdev);
-
-	lnw->qwork = create_singlethread_workqueue("langwell_otg_queue");
-	if (!lnw->qwork) {
-		dev_dbg(&pdev->dev, "cannot create langwell otg workqueuen");
-		ret = -ENOMEM;
-		goto error;
-	}
-
-	if (request_irq(pdev->irq, otg_irq, IRQF_SHARED,
-				driver_name, lnw) != 0) {
-		dev_dbg(&pdev->dev, "request interrupt %d failed\n", pdev->irq);
-		ret = -EBUSY;
-		goto error;
-	}
-
-	/* enable OTG interrupts */
-	langwell_otg_intr(1);
-
-	update_hsm();
-
-	langwell_update_transceiver();
-
-	return ret;
-error:
-	langwell_otg_intr(0);
-	transceiver_suspend(pdev);
-	return ret;
-}
-
-static int __init langwell_otg_init(void)
-{
-	return pci_register_driver(&otg_pci_driver);
-}
-module_init(langwell_otg_init);
-
-static void __exit langwell_otg_cleanup(void)
-{
-	pci_unregister_driver(&otg_pci_driver);
-}
-module_exit(langwell_otg_cleanup);
diff --git a/drivers/usb/otg/mv_otg.c b/drivers/usb/otg/mv_otg.c
index db0d4fcdc8e..b5fbe1452ab 100644
--- a/drivers/usb/otg/mv_otg.c
+++ b/drivers/usb/otg/mv_otg.c
@@ -202,6 +202,7 @@ static void mv_otg_init_irq(struct mv_otg *mvotg)
 
 static void mv_otg_start_host(struct mv_otg *mvotg, int on)
 {
+#ifdef CONFIG_USB
 	struct otg_transceiver *otg = &mvotg->otg;
 	struct usb_hcd *hcd;
 
@@ -216,6 +217,7 @@ static void mv_otg_start_host(struct mv_otg *mvotg, int on)
 		usb_add_hcd(hcd, hcd->irq, IRQF_SHARED);
 	else
 		usb_remove_hcd(hcd);
+#endif /* CONFIG_USB */
 }
 
 static void mv_otg_start_periphrals(struct mv_otg *mvotg, int on)
diff --git a/drivers/usb/renesas_usbhs/mod_gadget.c b/drivers/usb/renesas_usbhs/mod_gadget.c
index 528691d5f3e..7542aa94a46 100644
--- a/drivers/usb/renesas_usbhs/mod_gadget.c
+++ b/drivers/usb/renesas_usbhs/mod_gadget.c
@@ -425,7 +425,7 @@ static int usbhsg_recip_run_handle(struct usbhs_priv *priv,
 	struct usbhs_pipe *pipe;
 	int recip = ctrl->bRequestType & USB_RECIP_MASK;
 	int nth = le16_to_cpu(ctrl->wIndex) & USB_ENDPOINT_NUMBER_MASK;
-	int ret;
+	int ret = 0;
 	int (*func)(struct usbhs_priv *priv, struct usbhsg_uep *uep,
 		    struct usb_ctrlrequest *ctrl);
 	char *msg;
diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c
index fba1147ed91..08a5575724c 100644
--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -39,6 +39,8 @@ static void cp210x_get_termios(struct tty_struct *,
 	struct usb_serial_port *port);
 static void cp210x_get_termios_port(struct usb_serial_port *port,
 	unsigned int *cflagp, unsigned int *baudp);
+static void cp210x_change_speed(struct tty_struct *, struct usb_serial_port *,
+							struct ktermios *);
 static void cp210x_set_termios(struct tty_struct *, struct usb_serial_port *,
 							struct ktermios*);
 static int cp210x_tiocmget(struct tty_struct *);
@@ -134,10 +136,13 @@ static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(0x16DC, 0x0011) }, /* W-IE-NE-R Plein & Baus GmbH RCM Remote Control for MARATON Power Supply */
 	{ USB_DEVICE(0x16DC, 0x0012) }, /* W-IE-NE-R Plein & Baus GmbH MPOD Multi Channel Power Supply */
 	{ USB_DEVICE(0x16DC, 0x0015) }, /* W-IE-NE-R Plein & Baus GmbH CML Control, Monitoring and Data Logger */
+	{ USB_DEVICE(0x17A8, 0x0001) }, /* Kamstrup Optical Eye/3-wire */
+	{ USB_DEVICE(0x17A8, 0x0005) }, /* Kamstrup M-Bus Master MultiPort 250D */
 	{ USB_DEVICE(0x17F4, 0xAAAA) }, /* Wavesense Jazz blood glucose meter */
 	{ USB_DEVICE(0x1843, 0x0200) }, /* Vaisala USB Instrument Cable */
 	{ USB_DEVICE(0x18EF, 0xE00F) }, /* ELV USB-I2C-Interface */
 	{ USB_DEVICE(0x1BE3, 0x07A6) }, /* WAGO 750-923 USB Service Cable */
+	{ USB_DEVICE(0x3195, 0xF190) }, /* Link Instruments MSO-19 */
 	{ USB_DEVICE(0x413C, 0x9500) }, /* DW700 GPS USB interface */
 	{ } /* Terminating Entry */
 };
@@ -201,6 +206,8 @@ static struct usb_serial_driver cp210x_device = {
 #define CP210X_EMBED_EVENTS	0x15
 #define CP210X_GET_EVENTSTATE	0x16
 #define CP210X_SET_CHARS	0x19
+#define CP210X_GET_BAUDRATE	0x1D
+#define CP210X_SET_BAUDRATE	0x1E
 
 /* CP210X_IFC_ENABLE */
 #define UART_ENABLE		0x0001
@@ -360,8 +367,8 @@ static inline int cp210x_set_config_single(struct usb_serial_port *port,
  * Quantises the baud rate as per AN205 Table 1
  */
 static unsigned int cp210x_quantise_baudrate(unsigned int baud) {
-	if      (baud <= 56)       baud = 0;
-	else if (baud <= 300)      baud = 300;
+	if (baud <= 300)
+		baud = 300;
 	else if (baud <= 600)      baud = 600;
 	else if (baud <= 1200)     baud = 1200;
 	else if (baud <= 1800)     baud = 1800;
@@ -389,10 +396,10 @@ static unsigned int cp210x_quantise_baudrate(unsigned int baud) {
 	else if (baud <= 491520)   baud = 460800;
 	else if (baud <= 567138)   baud = 500000;
 	else if (baud <= 670254)   baud = 576000;
-	else if (baud <= 1053257)  baud = 921600;
-	else if (baud <= 1474560)  baud = 1228800;
-	else if (baud <= 2457600)  baud = 1843200;
-	else                       baud = 3686400;
+	else if (baud < 1000000)
+		baud = 921600;
+	else if (baud > 2000000)
+		baud = 2000000;
 	return baud;
 }
 
@@ -409,13 +416,14 @@ static int cp210x_open(struct tty_struct *tty, struct usb_serial_port *port)
 		return result;
 	}
 
-	result = usb_serial_generic_open(tty, port);
-	if (result)
-		return result;
-
 	/* Configure the termios structure */
 	cp210x_get_termios(tty, port);
-	return 0;
+
+	/* The baud rate must be initialised on cp2104 */
+	if (tty)
+		cp210x_change_speed(tty, port, NULL);
+
+	return usb_serial_generic_open(tty, port);
 }
 
 static void cp210x_close(struct usb_serial_port *port)
@@ -467,10 +475,7 @@ static void cp210x_get_termios_port(struct usb_serial_port *port,
 
 	dbg("%s - port %d", __func__, port->number);
 
-	cp210x_get_config(port, CP210X_GET_BAUDDIV, &baud, 2);
-	/* Convert to baudrate */
-	if (baud)
-		baud = cp210x_quantise_baudrate((BAUD_RATE_GEN_FREQ + baud/2)/ baud);
+	cp210x_get_config(port, CP210X_GET_BAUDRATE, &baud, 4);
 
 	dbg("%s - baud rate = %d", __func__, baud);
 	*baudp = baud;
@@ -579,11 +584,64 @@ static void cp210x_get_termios_port(struct usb_serial_port *port,
 	*cflagp = cflag;
 }
 
+/*
+ * CP2101 supports the following baud rates:
+ *
+ *	300, 600, 1200, 1800, 2400, 4800, 7200, 9600, 14400, 19200, 28800,
+ *	38400, 56000, 57600, 115200, 128000, 230400, 460800, 921600
+ *
+ * CP2102 and CP2103 support the following additional rates:
+ *
+ *	4000, 16000, 51200, 64000, 76800, 153600, 250000, 256000, 500000,
+ *	576000
+ *
+ * The device will map a requested rate to a supported one, but the result
+ * of requests for rates greater than 1053257 is undefined (see AN205).
+ *
+ * CP2104, CP2105 and CP2110 support most rates up to 2M, 921k and 1M baud,
+ * respectively, with an error less than 1%. The actual rates are determined
+ * by
+ *
+ *	div = round(freq / (2 x prescale x request))
+ *	actual = freq / (2 x prescale x div)
+ *
+ * For CP2104 and CP2105 freq is 48Mhz and prescale is 4 for request <= 365bps
+ * or 1 otherwise.
+ * For CP2110 freq is 24Mhz and prescale is 4 for request <= 300bps or 1
+ * otherwise.
+ */
+static void cp210x_change_speed(struct tty_struct *tty,
+		struct usb_serial_port *port, struct ktermios *old_termios)
+{
+	u32 baud;
+
+	baud = tty->termios->c_ospeed;
+
+	/* This maps the requested rate to a rate valid on cp2102 or cp2103,
+	 * or to an arbitrary rate in [1M,2M].
+	 *
+	 * NOTE: B0 is not implemented.
+	 */
+	baud = cp210x_quantise_baudrate(baud);
+
+	dbg("%s - setting baud rate to %u", __func__, baud);
+	if (cp210x_set_config(port, CP210X_SET_BAUDRATE, &baud,
+							sizeof(baud))) {
+		dev_warn(&port->dev, "failed to set baud rate to %u\n", baud);
+		if (old_termios)
+			baud = old_termios->c_ospeed;
+		else
+			baud = 9600;
+	}
+
+	tty_encode_baud_rate(tty, baud, baud);
+}
+
 static void cp210x_set_termios(struct tty_struct *tty,
 		struct usb_serial_port *port, struct ktermios *old_termios)
 {
 	unsigned int cflag, old_cflag;
-	unsigned int baud = 0, bits;
+	unsigned int bits;
 	unsigned int modem_ctl[4];
 
 	dbg("%s - port %d", __func__, port->number);
@@ -593,20 +651,9 @@ static void cp210x_set_termios(struct tty_struct *tty,
 
 	cflag = tty->termios->c_cflag;
 	old_cflag = old_termios->c_cflag;
-	baud = cp210x_quantise_baudrate(tty_get_baud_rate(tty));
-
-	/* If the baud rate is to be updated*/
-	if (baud != tty_termios_baud_rate(old_termios) && baud != 0) {
-		dbg("%s - Setting baud rate to %d baud", __func__,
-				baud);
-		if (cp210x_set_config_single(port, CP210X_SET_BAUDDIV,
-					((BAUD_RATE_GEN_FREQ + baud/2) / baud))) {
-			dbg("Baud rate requested not supported by device");
-			baud = tty_termios_baud_rate(old_termios);
-		}
-	}
-	/* Report back the resulting baud rate */
-	tty_encode_baud_rate(tty, baud, baud);
+
+	if (tty->termios->c_ospeed != old_termios->c_ospeed)
+		cp210x_change_speed(tty, port, old_termios);
 
 	/* If the number of data bits is to be updated */
 	if ((cflag & CSIZE) != (old_cflag & CSIZE)) {
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 01b6404df39..f770415305f 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -797,6 +797,7 @@ static struct usb_device_id id_table_combined [] = {
 		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
 	{ USB_DEVICE(ADI_VID, ADI_GNICEPLUS_PID),
 		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
+	{ USB_DEVICE(HORNBY_VID, HORNBY_ELITE_PID) },
 	{ USB_DEVICE(JETI_VID, JETI_SPC1201_PID) },
 	{ USB_DEVICE(MARVELL_VID, MARVELL_SHEEVAPLUG_PID),
 		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
@@ -805,6 +806,8 @@ static struct usb_device_id id_table_combined [] = {
 	{ USB_DEVICE(BAYER_VID, BAYER_CONTOUR_CABLE_PID) },
 	{ USB_DEVICE(FTDI_VID, MARVELL_OPENRD_PID),
 		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
+	{ USB_DEVICE(FTDI_VID, TI_XDS100V2_PID),
+		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
 	{ USB_DEVICE(FTDI_VID, HAMEG_HO820_PID) },
 	{ USB_DEVICE(FTDI_VID, HAMEG_HO720_PID) },
 	{ USB_DEVICE(FTDI_VID, HAMEG_HO730_PID) },
@@ -836,11 +839,13 @@ static struct usb_device_id id_table_combined [] = {
 	{ USB_DEVICE(FTDI_VID, FTDI_SCIENCESCOPE_LOGBOOKML_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_SCIENCESCOPE_LS_LOGBOOK_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_SCIENCESCOPE_HS_LOGBOOK_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_CINTERION_MC55I_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_DOTEC_PID) },
 	{ USB_DEVICE(QIHARDWARE_VID, MILKYMISTONE_JTAGSERIAL_PID),
 		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
 	{ USB_DEVICE(ST_VID, ST_STMCLT1030_PID),
 		.driver_info = (kernel_ulong_t)&ftdi_stmclite_quirk },
+	{ USB_DEVICE(FTDI_VID, FTDI_RF_R106) },
 	{ },					/* Optional parameter entry */
 	{ }					/* Terminating entry */
 };
@@ -1333,8 +1338,7 @@ static int set_serial_info(struct tty_struct *tty,
 		goto check_and_exit;
 	}
 
-	if ((new_serial.baud_base != priv->baud_base) &&
-	    (new_serial.baud_base < 9600)) {
+	if (new_serial.baud_base != priv->baud_base) {
 		mutex_unlock(&priv->cfg_lock);
 		return -EINVAL;
 	}
@@ -1824,6 +1828,7 @@ static int ftdi_sio_port_remove(struct usb_serial_port *port)
 
 static int ftdi_open(struct tty_struct *tty, struct usb_serial_port *port)
 {
+	struct ktermios dummy;
 	struct usb_device *dev = port->serial->dev;
 	struct ftdi_private *priv = usb_get_serial_port_data(port);
 	int result;
@@ -1842,8 +1847,10 @@ static int ftdi_open(struct tty_struct *tty, struct usb_serial_port *port)
 	   This is same behaviour as serial.c/rs_open() - Kuba */
 
 	/* ftdi_set_termios  will send usb control messages */
-	if (tty)
-		ftdi_set_termios(tty, port, tty->termios);
+	if (tty) {
+		memset(&dummy, 0, sizeof(dummy));
+		ftdi_set_termios(tty, port, &dummy);
+	}
 
 	/* Start reading from the device */
 	result = usb_serial_generic_open(tty, port);
diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h
index df1d7da933e..6f6058f0db1 100644
--- a/drivers/usb/serial/ftdi_sio_ids.h
+++ b/drivers/usb/serial/ftdi_sio_ids.h
@@ -39,6 +39,13 @@
 /* www.candapter.com Ewert Energy Systems CANdapter device */
 #define FTDI_CANDAPTER_PID 0x9F80 /* Product Id */
 
+/*
+ * Texas Instruments XDS100v2 JTAG / BeagleBone A3
+ * http://processors.wiki.ti.com/index.php/XDS100
+ * http://beagleboard.org/bone
+ */
+#define TI_XDS100V2_PID		0xa6d0
+
 #define FTDI_NXTCAM_PID		0xABB8 /* NXTCam for Mindstorms NXT */
 
 /* US Interface Navigator (http://www.usinterface.com/) */
@@ -525,6 +532,12 @@
 #define ADI_GNICEPLUS_PID	0xF001
 
 /*
+ * Hornby Elite
+ */
+#define HORNBY_VID		0x04D8
+#define HORNBY_ELITE_PID	0x000A
+
+/*
  * RATOC REX-USB60F
  */
 #define RATOC_VENDOR_ID		0x0584
@@ -1168,3 +1181,16 @@
  */
 /* TagTracer MIFARE*/
 #define FTDI_ZEITCONTROL_TAGTRACE_MIFARE_PID	0xF7C0
+
+/*
+ * Rainforest Automation
+ */
+/* ZigBee controller */
+#define FTDI_RF_R106		0x8A28
+
+/*
+ * Product: HCP HIT GPRS modem
+ * Manufacturer: HCP d.o.o.
+ * ATI command output: Cinterion MC55i
+ */
+#define FTDI_CINTERION_MC55I_PID	0xA951
diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c
index 65bf06aa591..5818bfc3261 100644
--- a/drivers/usb/serial/io_ti.c
+++ b/drivers/usb/serial/io_ti.c
@@ -2657,15 +2657,7 @@ cleanup:
 
 static void edge_disconnect(struct usb_serial *serial)
 {
-	int i;
-	struct edgeport_port *edge_port;
-
 	dbg("%s", __func__);
-
-	for (i = 0; i < serial->num_ports; ++i) {
-		edge_port = usb_get_serial_port_data(serial->port[i]);
-		edge_remove_sysfs_attrs(edge_port->port);
-	}
 }
 
 static void edge_release(struct usb_serial *serial)
@@ -2744,6 +2736,7 @@ static struct usb_serial_driver edgeport_1port_device = {
 	.disconnect		= edge_disconnect,
 	.release		= edge_release,
 	.port_probe		= edge_create_sysfs_attrs,
+	.port_remove		= edge_remove_sysfs_attrs,
 	.ioctl			= edge_ioctl,
 	.set_termios		= edge_set_termios,
 	.tiocmget		= edge_tiocmget,
@@ -2775,6 +2768,7 @@ static struct usb_serial_driver edgeport_2port_device = {
 	.disconnect		= edge_disconnect,
 	.release		= edge_release,
 	.port_probe		= edge_create_sysfs_attrs,
+	.port_remove		= edge_remove_sysfs_attrs,
 	.ioctl			= edge_ioctl,
 	.set_termios		= edge_set_termios,
 	.tiocmget		= edge_tiocmget,
diff --git a/drivers/usb/serial/kobil_sct.c b/drivers/usb/serial/kobil_sct.c
index 5d3beeeb5fd..a92a3efb507 100644
--- a/drivers/usb/serial/kobil_sct.c
+++ b/drivers/usb/serial/kobil_sct.c
@@ -38,7 +38,7 @@
 #include <linux/ioctl.h>
 #include "kobil_sct.h"
 
-static int debug;
+static bool debug;
 
 /* Version Information */
 #define DRIVER_VERSION "21/05/2004"
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 420d9857394..b54afceb961 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -480,6 +480,10 @@ static void option_instat_callback(struct urb *urb);
 #define ZD_VENDOR_ID				0x0685
 #define ZD_PRODUCT_7000				0x7000
 
+/* LG products */
+#define LG_VENDOR_ID				0x1004
+#define LG_PRODUCT_L02C				0x618f
+
 /* some devices interfaces need special handling due to a number of reasons */
 enum option_blacklist_reason {
 		OPTION_BLACKLIST_NONE = 0,
@@ -784,7 +788,6 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0012, 0xff, 0xff, 0xff),
 		.driver_info = (kernel_ulong_t)&net_intf1_blacklist },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0013, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0014, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MF628, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0016, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0017, 0xff, 0xff, 0xff),
@@ -799,7 +802,6 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0024, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0025, 0xff, 0xff, 0xff),
 		.driver_info = (kernel_ulong_t)&net_intf1_blacklist },
-	/* { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0026, 0xff, 0xff, 0xff) }, */
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0028, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0029, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0030, 0xff, 0xff, 0xff) },
@@ -824,7 +826,6 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0051, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0052, 0xff, 0xff, 0xff),
 		.driver_info = (kernel_ulong_t)&net_intf4_blacklist },
-	/* { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0053, 0xff, 0xff, 0xff) }, */
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0054, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0055, 0xff, 0xff, 0xff),
 		.driver_info = (kernel_ulong_t)&net_intf1_blacklist },
@@ -832,7 +833,6 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0057, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0058, 0xff, 0xff, 0xff),
 		.driver_info = (kernel_ulong_t)&net_intf4_blacklist },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0059, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0061, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0062, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0063, 0xff, 0xff, 0xff),
@@ -842,7 +842,6 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0066, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0067, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0069, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0070, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0076, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0077, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0078, 0xff, 0xff, 0xff) },
@@ -851,6 +850,16 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0083, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0086, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0087, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0088, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0089, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0090, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0091, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0092, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0093, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0094, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0095, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0096, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0097, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0104, 0xff, 0xff, 0xff),
 		.driver_info = (kernel_ulong_t)&net_intf4_blacklist },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0105, 0xff, 0xff, 0xff) },
@@ -871,23 +880,18 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0143, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0144, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0145, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0146, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0147, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0148, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0149, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0150, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0151, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0152, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0153, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0154, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0155, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0156, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0157, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0158, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0159, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0160, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0161, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0162, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0164, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0165, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1008, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1010, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1012, 0xff, 0xff, 0xff) },
@@ -1062,17 +1066,27 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1298, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1299, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1300, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x2002, 0xff,
+	  0xff, 0xff), .driver_info = (kernel_ulong_t)&zte_k3765_z_blacklist },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x2003, 0xff, 0xff, 0xff) },
+
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0014, 0xff, 0xff, 0xff) }, /* ZTE CDMA products */
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0027, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0059, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0060, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0070, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0073, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0094, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0130, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0133, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0141, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x2002, 0xff,
-	  0xff, 0xff), .driver_info = (kernel_ulong_t)&zte_k3765_z_blacklist },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x2003, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0147, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0152, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0168, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0170, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0176, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0178, 0xff, 0xff, 0xff) },
+
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_CDMA_TECH, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AC8710, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AC2726, 0xff, 0xff, 0xff) },
@@ -1183,6 +1197,7 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CLU526) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(VIETTEL_VENDOR_ID, VIETTEL_PRODUCT_VT1000, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZD_VENDOR_ID, ZD_PRODUCT_7000, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE(LG_VENDOR_ID, LG_PRODUCT_L02C) }, /* docomo L-02C modem */
 	{ } /* Terminating entry */
 };
 MODULE_DEVICE_TABLE(usb, option_ids);
diff --git a/drivers/usb/serial/qcaux.c b/drivers/usb/serial/qcaux.c
index 30b73e68a90..a34819884c1 100644
--- a/drivers/usb/serial/qcaux.c
+++ b/drivers/usb/serial/qcaux.c
@@ -36,6 +36,7 @@
 #define UTSTARCOM_PRODUCT_UM175_V1		0x3712
 #define UTSTARCOM_PRODUCT_UM175_V2		0x3714
 #define UTSTARCOM_PRODUCT_UM175_ALLTEL		0x3715
+#define PANTECH_PRODUCT_UML190_VZW		0x3716
 #define PANTECH_PRODUCT_UML290_VZW		0x3718
 
 /* CMOTECH devices */
@@ -67,7 +68,11 @@ static struct usb_device_id id_table[] = {
 	{ USB_DEVICE_AND_INTERFACE_INFO(LG_VENDOR_ID, LG_PRODUCT_VX4400_6000, 0xff, 0xff, 0x00) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(SANYO_VENDOR_ID, SANYO_PRODUCT_KATANA_LX, 0xff, 0xff, 0x00) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(SAMSUNG_VENDOR_ID, SAMSUNG_PRODUCT_U520, 0xff, 0x00, 0x00) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, PANTECH_PRODUCT_UML290_VZW, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, PANTECH_PRODUCT_UML190_VZW, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, PANTECH_PRODUCT_UML190_VZW, 0xff, 0xfe, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, PANTECH_PRODUCT_UML290_VZW, 0xff, 0xfd, 0xff) },  /* NMEA */
+	{ USB_DEVICE_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, PANTECH_PRODUCT_UML290_VZW, 0xff, 0xfe, 0xff) },  /* WMC */
+	{ USB_DEVICE_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, PANTECH_PRODUCT_UML290_VZW, 0xff, 0xff, 0xff) },  /* DIAG */
 	{ },
 };
 MODULE_DEVICE_TABLE(usb, id_table);
diff --git a/drivers/usb/serial/qcserial.c b/drivers/usb/serial/qcserial.c
index 1d5deee3be5..f98800f2324 100644
--- a/drivers/usb/serial/qcserial.c
+++ b/drivers/usb/serial/qcserial.c
@@ -36,6 +36,11 @@ static const struct usb_device_id id_table[] = {
 	{USB_DEVICE(0x413c, 0x8171)},	/* Dell Gobi QDL device */
 	{USB_DEVICE(0x1410, 0xa001)},	/* Novatel Gobi Modem device */
 	{USB_DEVICE(0x1410, 0xa008)},	/* Novatel Gobi QDL device */
+	{USB_DEVICE(0x1410, 0xa010)},	/* Novatel Gobi QDL device */
+	{USB_DEVICE(0x1410, 0xa011)},	/* Novatel Gobi QDL device */
+	{USB_DEVICE(0x1410, 0xa012)},	/* Novatel Gobi QDL device */
+	{USB_DEVICE(0x1410, 0xa013)},	/* Novatel Gobi QDL device */
+	{USB_DEVICE(0x1410, 0xa014)},	/* Novatel Gobi QDL device */
 	{USB_DEVICE(0x0b05, 0x1776)},	/* Asus Gobi Modem device */
 	{USB_DEVICE(0x0b05, 0x1774)},	/* Asus Gobi QDL device */
 	{USB_DEVICE(0x19d2, 0xfff3)},	/* ONDA Gobi Modem device */
@@ -86,7 +91,16 @@ static const struct usb_device_id id_table[] = {
 	{USB_DEVICE(0x16d8, 0x8002)},	/* CMDTech Gobi 2000 Modem device (VU922) */
 	{USB_DEVICE(0x05c6, 0x9204)},	/* Gobi 2000 QDL device */
 	{USB_DEVICE(0x05c6, 0x9205)},	/* Gobi 2000 Modem device */
+
+	{USB_DEVICE(0x05c6, 0x920c)},	/* Gobi 3000 QDL */
+	{USB_DEVICE(0x05c6, 0x920d)},	/* Gobi 3000 Composite */
+	{USB_DEVICE(0x1410, 0xa020)},   /* Novatel Gobi 3000 QDL */
+	{USB_DEVICE(0x1410, 0xa021)},	/* Novatel Gobi 3000 Composite */
+	{USB_DEVICE(0x413c, 0x8193)},	/* Dell Gobi 3000 QDL */
+	{USB_DEVICE(0x413c, 0x8194)},	/* Dell Gobi 3000 Composite */
 	{USB_DEVICE(0x1199, 0x9013)},	/* Sierra Wireless Gobi 3000 Modem device (MC8355) */
+	{USB_DEVICE(0x12D1, 0x14F0)},	/* Sony Gobi 3000 QDL */
+	{USB_DEVICE(0x12D1, 0x14F1)},	/* Sony Gobi 3000 Composite */
 	{ }				/* Terminating entry */
 };
 MODULE_DEVICE_TABLE(usb, id_table);
@@ -123,8 +137,6 @@ static int qcprobe(struct usb_serial *serial, const struct usb_device_id *id)
 
 	spin_lock_init(&data->susp_lock);
 
-	usb_enable_autosuspend(serial->dev);
-
 	switch (nintf) {
 	case 1:
 		/* QDL mode */
diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c
index 8468eb769a2..75b838eff17 100644
--- a/drivers/usb/serial/ti_usb_3410_5052.c
+++ b/drivers/usb/serial/ti_usb_3410_5052.c
@@ -165,7 +165,7 @@ static unsigned int product_5052_count;
 /* the array dimension is the number of default entries plus */
 /* TI_EXTRA_VID_PID_COUNT user defined entries plus 1 terminating */
 /* null entry */
-static struct usb_device_id ti_id_table_3410[13+TI_EXTRA_VID_PID_COUNT+1] = {
+static struct usb_device_id ti_id_table_3410[14+TI_EXTRA_VID_PID_COUNT+1] = {
 	{ USB_DEVICE(TI_VENDOR_ID, TI_3410_PRODUCT_ID) },
 	{ USB_DEVICE(TI_VENDOR_ID, TI_3410_EZ430_ID) },
 	{ USB_DEVICE(MTS_VENDOR_ID, MTS_GSM_NO_FW_PRODUCT_ID) },
@@ -179,6 +179,7 @@ static struct usb_device_id ti_id_table_3410[13+TI_EXTRA_VID_PID_COUNT+1] = {
 	{ USB_DEVICE(IBM_VENDOR_ID, IBM_4543_PRODUCT_ID) },
 	{ USB_DEVICE(IBM_VENDOR_ID, IBM_454B_PRODUCT_ID) },
 	{ USB_DEVICE(IBM_VENDOR_ID, IBM_454C_PRODUCT_ID) },
+	{ USB_DEVICE(ABBOTT_VENDOR_ID, ABBOTT_PRODUCT_ID) },
 };
 
 static struct usb_device_id ti_id_table_5052[5+TI_EXTRA_VID_PID_COUNT+1] = {
@@ -188,7 +189,7 @@ static struct usb_device_id ti_id_table_5052[5+TI_EXTRA_VID_PID_COUNT+1] = {
 	{ USB_DEVICE(TI_VENDOR_ID, TI_5052_FIRMWARE_PRODUCT_ID) },
 };
 
-static struct usb_device_id ti_id_table_combined[17+2*TI_EXTRA_VID_PID_COUNT+1] = {
+static struct usb_device_id ti_id_table_combined[18+2*TI_EXTRA_VID_PID_COUNT+1] = {
 	{ USB_DEVICE(TI_VENDOR_ID, TI_3410_PRODUCT_ID) },
 	{ USB_DEVICE(TI_VENDOR_ID, TI_3410_EZ430_ID) },
 	{ USB_DEVICE(MTS_VENDOR_ID, MTS_GSM_NO_FW_PRODUCT_ID) },
@@ -206,6 +207,7 @@ static struct usb_device_id ti_id_table_combined[17+2*TI_EXTRA_VID_PID_COUNT+1]
 	{ USB_DEVICE(IBM_VENDOR_ID, IBM_4543_PRODUCT_ID) },
 	{ USB_DEVICE(IBM_VENDOR_ID, IBM_454B_PRODUCT_ID) },
 	{ USB_DEVICE(IBM_VENDOR_ID, IBM_454C_PRODUCT_ID) },
+	{ USB_DEVICE(ABBOTT_VENDOR_ID, ABBOTT_PRODUCT_ID) },
 	{ }
 };
 
diff --git a/drivers/usb/serial/ti_usb_3410_5052.h b/drivers/usb/serial/ti_usb_3410_5052.h
index 2aac1953993..f140f1b9d5c 100644
--- a/drivers/usb/serial/ti_usb_3410_5052.h
+++ b/drivers/usb/serial/ti_usb_3410_5052.h
@@ -49,6 +49,10 @@
 #define MTS_MT9234ZBA_PRODUCT_ID	0xF115
 #define MTS_MT9234ZBAOLD_PRODUCT_ID	0x0319
 
+/* Abbott Diabetics vendor and product ids */
+#define ABBOTT_VENDOR_ID		0x1a61
+#define ABBOTT_PRODUCT_ID		0x3410
+
 /* Commands */
 #define TI_GET_VERSION			0x01
 #define TI_GET_PORT_STATUS		0x02
diff --git a/drivers/usb/storage/realtek_cr.c b/drivers/usb/storage/realtek_cr.c
index 1f62723ef1a..d32f72061c0 100644
--- a/drivers/usb/storage/realtek_cr.c
+++ b/drivers/usb/storage/realtek_cr.c
@@ -789,7 +789,7 @@ static void rts51x_suspend_timer_fn(unsigned long data)
 			rts51x_set_stat(chip, RTS51X_STAT_SS);
 			/* ignore mass storage interface's children */
 			pm_suspend_ignore_children(&us->pusb_intf->dev, true);
-			usb_autopm_put_interface(us->pusb_intf);
+			usb_autopm_put_interface_async(us->pusb_intf);
 			US_DEBUGP("%s: RTS51X_STAT_SS 01,"
 				"intf->pm_usage_cnt:%d, power.usage:%d\n",
 				__func__,
diff --git a/drivers/usb/storage/usb.c b/drivers/usb/storage/usb.c
index 3dd7da9fd50..db51ba16dc0 100644
--- a/drivers/usb/storage/usb.c
+++ b/drivers/usb/storage/usb.c
@@ -788,15 +788,19 @@ static void quiesce_and_remove_host(struct us_data *us)
 	struct Scsi_Host *host = us_to_host(us);
 
 	/* If the device is really gone, cut short reset delays */
-	if (us->pusb_dev->state == USB_STATE_NOTATTACHED)
+	if (us->pusb_dev->state == USB_STATE_NOTATTACHED) {
 		set_bit(US_FLIDX_DISCONNECTING, &us->dflags);
+		wake_up(&us->delay_wait);
+	}
 
-	/* Prevent SCSI-scanning (if it hasn't started yet)
-	 * and wait for the SCSI-scanning thread to stop.
+	/* Prevent SCSI scanning (if it hasn't started yet)
+	 * or wait for the SCSI-scanning routine to stop.
 	 */
-	set_bit(US_FLIDX_DONT_SCAN, &us->dflags);
-	wake_up(&us->delay_wait);
-	wait_for_completion(&us->scanning_done);
+	cancel_delayed_work_sync(&us->scan_dwork);
+
+	/* Balance autopm calls if scanning was cancelled */
+	if (test_bit(US_FLIDX_SCAN_PENDING, &us->dflags))
+		usb_autopm_put_interface_no_suspend(us->pusb_intf);
 
 	/* Removing the host will perform an orderly shutdown: caches
 	 * synchronized, disks spun down, etc.
@@ -823,53 +827,28 @@ static void release_everything(struct us_data *us)
 	scsi_host_put(us_to_host(us));
 }
 
-/* Thread to carry out delayed SCSI-device scanning */
-static int usb_stor_scan_thread(void * __us)
+/* Delayed-work routine to carry out SCSI-device scanning */
+static void usb_stor_scan_dwork(struct work_struct *work)
 {
-	struct us_data *us = (struct us_data *)__us;
+	struct us_data *us = container_of(work, struct us_data,
+			scan_dwork.work);
 	struct device *dev = &us->pusb_intf->dev;
 
-	dev_dbg(dev, "device found\n");
-
-	set_freezable();
+	dev_dbg(dev, "starting scan\n");
 
-	/*
-	 * Wait for the timeout to expire or for a disconnect
-	 *
-	 * We can't freeze in this thread or we risk causing khubd to
-	 * fail to freeze, but we can't be non-freezable either. Nor can
-	 * khubd freeze while waiting for scanning to complete as it may
-	 * hold the device lock, causing a hang when suspending devices.
-	 * So instead of using wait_event_freezable(), explicitly test
-	 * for (DONT_SCAN || freezing) in interruptible wait and proceed
-	 * if any of DONT_SCAN, freezing or timeout has happened.
-	 */
-	if (delay_use > 0) {
-		dev_dbg(dev, "waiting for device to settle "
-				"before scanning\n");
-		wait_event_interruptible_timeout(us->delay_wait,
-				test_bit(US_FLIDX_DONT_SCAN, &us->dflags) ||
-				freezing(current), delay_use * HZ);
+	/* For bulk-only devices, determine the max LUN value */
+	if (us->protocol == USB_PR_BULK && !(us->fflags & US_FL_SINGLE_LUN)) {
+		mutex_lock(&us->dev_mutex);
+		us->max_lun = usb_stor_Bulk_max_lun(us);
+		mutex_unlock(&us->dev_mutex);
 	}
+	scsi_scan_host(us_to_host(us));
+	dev_dbg(dev, "scan complete\n");
 
-	/* If the device is still connected, perform the scanning */
-	if (!test_bit(US_FLIDX_DONT_SCAN, &us->dflags)) {
-
-		/* For bulk-only devices, determine the max LUN value */
-		if (us->protocol == USB_PR_BULK &&
-				!(us->fflags & US_FL_SINGLE_LUN)) {
-			mutex_lock(&us->dev_mutex);
-			us->max_lun = usb_stor_Bulk_max_lun(us);
-			mutex_unlock(&us->dev_mutex);
-		}
-		scsi_scan_host(us_to_host(us));
-		dev_dbg(dev, "scan complete\n");
-
-		/* Should we unbind if no devices were detected? */
-	}
+	/* Should we unbind if no devices were detected? */
 
 	usb_autopm_put_interface(us->pusb_intf);
-	complete_and_exit(&us->scanning_done, 0);
+	clear_bit(US_FLIDX_SCAN_PENDING, &us->dflags);
 }
 
 static unsigned int usb_stor_sg_tablesize(struct usb_interface *intf)
@@ -916,7 +895,7 @@ int usb_stor_probe1(struct us_data **pus,
 	init_completion(&us->cmnd_ready);
 	init_completion(&(us->notify));
 	init_waitqueue_head(&us->delay_wait);
-	init_completion(&us->scanning_done);
+	INIT_DELAYED_WORK(&us->scan_dwork, usb_stor_scan_dwork);
 
 	/* Associate the us_data structure with the USB device */
 	result = associate_dev(us, intf);
@@ -947,7 +926,6 @@ EXPORT_SYMBOL_GPL(usb_stor_probe1);
 /* Second part of general USB mass-storage probing */
 int usb_stor_probe2(struct us_data *us)
 {
-	struct task_struct *th;
 	int result;
 	struct device *dev = &us->pusb_intf->dev;
 
@@ -988,20 +966,14 @@ int usb_stor_probe2(struct us_data *us)
 		goto BadDevice;
 	}
 
-	/* Start up the thread for delayed SCSI-device scanning */
-	th = kthread_create(usb_stor_scan_thread, us, "usb-stor-scan");
-	if (IS_ERR(th)) {
-		dev_warn(dev,
-				"Unable to start the device-scanning thread\n");
-		complete(&us->scanning_done);
-		quiesce_and_remove_host(us);
-		result = PTR_ERR(th);
-		goto BadDevice;
-	}
-
+	/* Submit the delayed_work for SCSI-device scanning */
 	usb_autopm_get_interface_no_resume(us->pusb_intf);
-	wake_up_process(th);
+	set_bit(US_FLIDX_SCAN_PENDING, &us->dflags);
 
+	if (delay_use > 0)
+		dev_dbg(dev, "waiting for device to settle before scanning\n");
+	queue_delayed_work(system_freezable_wq, &us->scan_dwork,
+			delay_use * HZ);
 	return 0;
 
 	/* We come here if there are any problems */
diff --git a/drivers/usb/storage/usb.h b/drivers/usb/storage/usb.h
index 7b0f2113632..75f70f04f37 100644
--- a/drivers/usb/storage/usb.h
+++ b/drivers/usb/storage/usb.h
@@ -47,6 +47,7 @@
 #include <linux/blkdev.h>
 #include <linux/completion.h>
 #include <linux/mutex.h>
+#include <linux/workqueue.h>
 #include <scsi/scsi_host.h>
 
 struct us_data;
@@ -72,7 +73,7 @@ struct us_unusual_dev {
 #define US_FLIDX_DISCONNECTING	3	/* disconnect in progress   */
 #define US_FLIDX_RESETTING	4	/* device reset in progress */
 #define US_FLIDX_TIMED_OUT	5	/* SCSI midlayer timed out  */
-#define US_FLIDX_DONT_SCAN	6	/* don't scan (disconnect)  */
+#define US_FLIDX_SCAN_PENDING	6	/* scanning not yet done    */
 #define US_FLIDX_REDO_READ10	7	/* redo READ(10) command    */
 #define US_FLIDX_READ10_WORKED	8	/* previous READ(10) succeeded */
 
@@ -147,8 +148,8 @@ struct us_data {
 	/* mutual exclusion and synchronization structures */
 	struct completion	cmnd_ready;	 /* to sleep thread on	    */
 	struct completion	notify;		 /* thread begin/end	    */
-	wait_queue_head_t	delay_wait;	 /* wait during scan, reset */
-	struct completion	scanning_done;	 /* wait for scan thread    */
+	wait_queue_head_t	delay_wait;	 /* wait during reset	    */
+	struct delayed_work	scan_dwork;	 /* for async scanning      */
 
 	/* subdriver information */
 	void			*extra;		 /* Any extra data          */
diff --git a/drivers/usb/usb-skeleton.c b/drivers/usb/usb-skeleton.c
index 8efeae24764..b4a71679c93 100644
--- a/drivers/usb/usb-skeleton.c
+++ b/drivers/usb/usb-skeleton.c
@@ -27,8 +27,6 @@
 #define USB_SKEL_VENDOR_ID	0xfff0
 #define USB_SKEL_PRODUCT_ID	0xfff0
 
-static DEFINE_MUTEX(skel_mutex);
-
 /* table of devices that work with this driver */
 static const struct usb_device_id skel_table[] = {
 	{ USB_DEVICE(USB_SKEL_VENDOR_ID, USB_SKEL_PRODUCT_ID) },
@@ -101,25 +99,18 @@ static int skel_open(struct inode *inode, struct file *file)
 		goto exit;
 	}
 
-	mutex_lock(&skel_mutex);
 	dev = usb_get_intfdata(interface);
 	if (!dev) {
-		mutex_unlock(&skel_mutex);
 		retval = -ENODEV;
 		goto exit;
 	}
 
 	/* increment our usage count for the device */
 	kref_get(&dev->kref);
-	mutex_unlock(&skel_mutex);
 
 	/* lock the device to allow correctly handling errors
 	 * in resumption */
 	mutex_lock(&dev->io_mutex);
-	if (!dev->interface) {
-		retval = -ENODEV;
-		goto out_err;
-	}
 
 	retval = usb_autopm_get_interface(interface);
 	if (retval)
@@ -127,11 +118,7 @@ static int skel_open(struct inode *inode, struct file *file)
 
 	/* save our object in the file's private structure */
 	file->private_data = dev;
-
-out_err:
 	mutex_unlock(&dev->io_mutex);
-	if (retval)
-		kref_put(&dev->kref, skel_delete);
 
 exit:
 	return retval;
@@ -611,6 +598,7 @@ static void skel_disconnect(struct usb_interface *interface)
 	int minor = interface->minor;
 
 	dev = usb_get_intfdata(interface);
+	usb_set_intfdata(interface, NULL);
 
 	/* give back our minor */
 	usb_deregister_dev(interface, &skel_class);
@@ -622,12 +610,8 @@ static void skel_disconnect(struct usb_interface *interface)
 
 	usb_kill_anchored_urbs(&dev->submitted);
 
-	mutex_lock(&skel_mutex);
-	usb_set_intfdata(interface, NULL);
-
 	/* decrement our usage count */
 	kref_put(&dev->kref, skel_delete);
-	mutex_unlock(&skel_mutex);
 
 	dev_info(&interface->dev, "USB Skeleton #%d now disconnected", minor);
 }
diff --git a/drivers/usb/wusbcore/Kconfig b/drivers/usb/wusbcore/Kconfig
index 0ead8826ec7..f29fdd7f6d7 100644
--- a/drivers/usb/wusbcore/Kconfig
+++ b/drivers/usb/wusbcore/Kconfig
@@ -6,7 +6,7 @@ config USB_WUSB
 	depends on EXPERIMENTAL
 	depends on USB
 	depends on PCI
-        select UWB
+	depends on UWB
         select CRYPTO
         select CRYPTO_BLKCIPHER
         select CRYPTO_CBC