usb: dwc3: omap: add dwc3_omap_readl/writel functions

We separate between dwc3-omap helper functions to dwc3-core helper
functions. This will allow us to change the helper functions
implementation according to each module need.

Signed-off-by: Ido Shayevitz <idos@codeaurora.org>
Signed-off-by: Felipe Balbi <balbi@ti.com>

1 files changed, 21 insertions, 11 deletions

diff --git a/drivers/usb/dwc3/dwc3-omap.c b/drivers/usb/dwc3/dwc3-omap.c
index d7d9c0ec951..479dc047da3 100644
--- a/drivers/usb/dwc3/dwc3-omap.c
+++ b/drivers/usb/dwc3/dwc3-omap.c
@@ -49,7 +49,6 @@
 #include <linux/of.h>
 
 #include "core.h"
-#include "io.h"
 
 /*
  * All these registers belong to OMAP's Wrapper around the
@@ -143,6 +142,17 @@ struct dwc3_omap {
 	u32			dma_status:1;
 };
 
+static inline u32 dwc3_omap_readl(void __iomem *base, u32 offset)
+{
+	return readl(base + offset);
+}
+
+static inline void dwc3_omap_writel(void __iomem *base, u32 offset, u32 value)
+{
+	writel(value, base + offset);
+}
+
+
 static irqreturn_t dwc3_omap_interrupt(int irq, void *_omap)
 {
 	struct dwc3_omap	*omap = _omap;
@@ -150,7 +160,7 @@ static irqreturn_t dwc3_omap_interrupt(int irq, void *_omap)
 
 	spin_lock(&omap->lock);
 
-	reg = dwc3_readl(omap->base, USBOTGSS_IRQSTATUS_1);
+	reg = dwc3_omap_readl(omap->base, USBOTGSS_IRQSTATUS_1);
 
 	if (reg & USBOTGSS_IRQ1_DMADISABLECLR) {
 		dev_dbg(omap->dev, "DMA Disable was Cleared\n");
@@ -184,10 +194,10 @@ static irqreturn_t dwc3_omap_interrupt(int irq, void *_omap)
 	if (reg & USBOTGSS_IRQ1_IDPULLUP_FALL)
 		dev_dbg(omap->dev, "IDPULLUP Fall\n");
 
-	dwc3_writel(omap->base, USBOTGSS_IRQSTATUS_1, reg);
+	dwc3_omap_writel(omap->base, USBOTGSS_IRQSTATUS_1, reg);
 
-	reg = dwc3_readl(omap->base, USBOTGSS_IRQSTATUS_0);
-	dwc3_writel(omap->base, USBOTGSS_IRQSTATUS_0, reg);
+	reg = dwc3_omap_readl(omap->base, USBOTGSS_IRQSTATUS_0);
+	dwc3_omap_writel(omap->base, USBOTGSS_IRQSTATUS_0, reg);
 
 	spin_unlock(&omap->lock);
 
@@ -270,7 +280,7 @@ static int __devinit dwc3_omap_probe(struct platform_device *pdev)
 	omap->base	= base;
 	omap->dwc3	= dwc3;
 
-	reg = dwc3_readl(omap->base, USBOTGSS_UTMI_OTG_STATUS);
+	reg = dwc3_omap_readl(omap->base, USBOTGSS_UTMI_OTG_STATUS);
 
 	utmi_mode = of_get_property(node, "utmi-mode", &size);
 	if (utmi_mode && size == sizeof(*utmi_mode)) {
@@ -293,10 +303,10 @@ static int __devinit dwc3_omap_probe(struct platform_device *pdev)
 		}
 	}
 
-	dwc3_writel(omap->base, USBOTGSS_UTMI_OTG_STATUS, reg);
+	dwc3_omap_writel(omap->base, USBOTGSS_UTMI_OTG_STATUS, reg);
 
 	/* check the DMA Status */
-	reg = dwc3_readl(omap->base, USBOTGSS_SYSCONFIG);
+	reg = dwc3_omap_readl(omap->base, USBOTGSS_SYSCONFIG);
 	omap->dma_status = !!(reg & USBOTGSS_SYSCONFIG_DMADISABLE);
 
 	/* Set No-Idle and No-Standby */
@@ -306,7 +316,7 @@ static int __devinit dwc3_omap_probe(struct platform_device *pdev)
 	reg |= (USBOTGSS_SYSCONFIG_STANDBYMODE(USBOTGSS_STANDBYMODE_NO_STANDBY)
 		| USBOTGSS_SYSCONFIG_IDLEMODE(USBOTGSS_IDLEMODE_NO_IDLE));
 
-	dwc3_writel(omap->base, USBOTGSS_SYSCONFIG, reg);
+	dwc3_omap_writel(omap->base, USBOTGSS_SYSCONFIG, reg);
 
 	ret = devm_request_irq(dev, omap->irq, dwc3_omap_interrupt, 0,
 			"dwc3-omap", omap);
@@ -318,7 +328,7 @@ static int __devinit dwc3_omap_probe(struct platform_device *pdev)
 
 	/* enable all IRQs */
 	reg = USBOTGSS_IRQO_COREIRQ_ST;
-	dwc3_writel(omap->base, USBOTGSS_IRQENABLE_SET_0, reg);
+	dwc3_omap_writel(omap->base, USBOTGSS_IRQENABLE_SET_0, reg);
 
 	reg = (USBOTGSS_IRQ1_OEVT |
 			USBOTGSS_IRQ1_DRVVBUS_RISE |
@@ -330,7 +340,7 @@ static int __devinit dwc3_omap_probe(struct platform_device *pdev)
 			USBOTGSS_IRQ1_DISCHRGVBUS_FALL |
 			USBOTGSS_IRQ1_IDPULLUP_FALL);
 
-	dwc3_writel(omap->base, USBOTGSS_IRQENABLE_SET_1, reg);
+	dwc3_omap_writel(omap->base, USBOTGSS_IRQENABLE_SET_1, reg);
 
 	ret = platform_device_add_resources(dwc3, pdev->resource,
 			pdev->num_resources);