diff options
author | Mark Einon <mark.einon@gmail.com> | 2011-10-23 10:22:51 +0100 |
---|---|---|
committer | Greg Kroah-Hartman <gregkh@suse.de> | 2011-10-23 11:35:13 +0200 |
commit | 2288760e3bc1639d8a33ae751f36738b7d96af8f (patch) | |
tree | 80d30eac29e4d8a806942fd99388aaa77e83e86d /drivers/staging/et131x/et131x.c | |
parent | a4d444bdef709d37838f83f92cab33b6c4475627 (diff) | |
download | linux-3.10-2288760e3bc1639d8a33ae751f36738b7d96af8f.tar.gz linux-3.10-2288760e3bc1639d8a33ae751f36738b7d96af8f.tar.bz2 linux-3.10-2288760e3bc1639d8a33ae751f36738b7d96af8f.zip |
staging: et131x: Remove even more forward declarations
Moved functions in et131x.c file to remove the forward declarations of:
et1310_in_phy_coma
et1310_phy_access_mii_bit
et131x_phy_mii_read
et131x_mii_write
et131x_rx_dma_memory_free
Signed-off-by: Mark Einon <mark.einon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Diffstat (limited to 'drivers/staging/et131x/et131x.c')
-rw-r--r-- | drivers/staging/et131x/et131x.c | 395 |
1 files changed, 193 insertions, 202 deletions
diff --git a/drivers/staging/et131x/et131x.c b/drivers/staging/et131x/et131x.c index 208c69fcb76..2e621aaadd6 100644 --- a/drivers/staging/et131x/et131x.c +++ b/drivers/staging/et131x/et131x.c @@ -576,15 +576,6 @@ struct et131x_adapter { struct net_device_stats net_stats; }; -int et1310_in_phy_coma(struct et131x_adapter *adapter); -void et1310_phy_access_mii_bit(struct et131x_adapter *adapter, - u16 action, - u16 regnum, u16 bitnum, u8 *value); -int et131x_phy_mii_read(struct et131x_adapter *adapter, u8 addr, - u8 reg, u16 *value); -int32_t et131x_mii_write(struct et131x_adapter *adapter, - u8 reg, u16 value); -void et131x_rx_dma_memory_free(struct et131x_adapter *adapter); void et131x_rx_dma_disable(struct et131x_adapter *adapter); void et131x_rx_dma_enable(struct et131x_adapter *adapter); void et131x_init_send(struct et131x_adapter *adapter); @@ -1019,6 +1010,21 @@ void et1310_config_mac_regs2(struct et131x_adapter *adapter) } } +/** + * et1310_in_phy_coma - check if the device is in phy coma + * @adapter: pointer to our adapter structure + * + * Returns 0 if the device is not in phy coma, 1 if it is in phy coma + */ +int et1310_in_phy_coma(struct et131x_adapter *adapter) +{ + u32 pmcsr; + + pmcsr = readl(&adapter->regs->global.pm_csr); + + return ET_PM_PHY_SW_COMA & pmcsr ? 1 : 0; +} + void et1310_setup_device_for_multicast(struct et131x_adapter *adapter) { struct rxmac_regs __iomem *rxmac = &adapter->regs->rxmac; @@ -1318,6 +1324,184 @@ void et1310_config_macstat_regs(struct et131x_adapter *adapter) writel(0xFFFE7E8B, &macstat->carry_reg2_mask); } +/** + * et131x_phy_mii_read - Read from the PHY through the MII Interface on the MAC + * @adapter: pointer to our private adapter structure + * @addr: the address of the transceiver + * @reg: the register to read + * @value: pointer to a 16-bit value in which the value will be stored + * + * Returns 0 on success, errno on failure (as defined in errno.h) + */ +int et131x_phy_mii_read(struct et131x_adapter *adapter, u8 addr, + u8 reg, u16 *value) +{ + struct mac_regs __iomem *mac = &adapter->regs->mac; + int status = 0; + u32 delay = 0; + u32 mii_addr; + u32 mii_cmd; + u32 mii_indicator; + + /* Save a local copy of the registers we are dealing with so we can + * set them back + */ + mii_addr = readl(&mac->mii_mgmt_addr); + mii_cmd = readl(&mac->mii_mgmt_cmd); + + /* Stop the current operation */ + writel(0, &mac->mii_mgmt_cmd); + + /* Set up the register we need to read from on the correct PHY */ + writel(MII_ADDR(addr, reg), &mac->mii_mgmt_addr); + + writel(0x1, &mac->mii_mgmt_cmd); + + do { + udelay(50); + delay++; + mii_indicator = readl(&mac->mii_mgmt_indicator); + } while ((mii_indicator & MGMT_WAIT) && delay < 50); + + /* If we hit the max delay, we could not read the register */ + if (delay == 50) { + dev_warn(&adapter->pdev->dev, + "reg 0x%08x could not be read\n", reg); + dev_warn(&adapter->pdev->dev, "status is 0x%08x\n", + mii_indicator); + + status = -EIO; + } + + /* If we hit here we were able to read the register and we need to + * return the value to the caller */ + *value = readl(&mac->mii_mgmt_stat) & 0xFFFF; + + /* Stop the read operation */ + writel(0, &mac->mii_mgmt_cmd); + + /* set the registers we touched back to the state at which we entered + * this function + */ + writel(mii_addr, &mac->mii_mgmt_addr); + writel(mii_cmd, &mac->mii_mgmt_cmd); + + return status; +} + +int et131x_mii_read(struct et131x_adapter *adapter, u8 reg, u16 *value) +{ + struct phy_device *phydev = adapter->phydev; + + if (!phydev) + return -EIO; + + return et131x_phy_mii_read(adapter, phydev->addr, reg, value); +} + +/** + * et131x_mii_write - Write to a PHY register through the MII interface of the MAC + * @adapter: pointer to our private adapter structure + * @reg: the register to read + * @value: 16-bit value to write + * + * FIXME: one caller in netdev still + * + * Return 0 on success, errno on failure (as defined in errno.h) + */ +int et131x_mii_write(struct et131x_adapter *adapter, u8 reg, u16 value) +{ + struct mac_regs __iomem *mac = &adapter->regs->mac; + struct phy_device *phydev = adapter->phydev; + int status = 0; + u8 addr; + u32 delay = 0; + u32 mii_addr; + u32 mii_cmd; + u32 mii_indicator; + + if (!phydev) + return -EIO; + + addr = phydev->addr; + + /* Save a local copy of the registers we are dealing with so we can + * set them back + */ + mii_addr = readl(&mac->mii_mgmt_addr); + mii_cmd = readl(&mac->mii_mgmt_cmd); + + /* Stop the current operation */ + writel(0, &mac->mii_mgmt_cmd); + + /* Set up the register we need to write to on the correct PHY */ + writel(MII_ADDR(addr, reg), &mac->mii_mgmt_addr); + + /* Add the value to write to the registers to the mac */ + writel(value, &mac->mii_mgmt_ctrl); + + do { + udelay(50); + delay++; + mii_indicator = readl(&mac->mii_mgmt_indicator); + } while ((mii_indicator & MGMT_BUSY) && delay < 100); + + /* If we hit the max delay, we could not write the register */ + if (delay == 100) { + u16 tmp; + + dev_warn(&adapter->pdev->dev, + "reg 0x%08x could not be written", reg); + dev_warn(&adapter->pdev->dev, "status is 0x%08x\n", + mii_indicator); + dev_warn(&adapter->pdev->dev, "command is 0x%08x\n", + readl(&mac->mii_mgmt_cmd)); + + et131x_mii_read(adapter, reg, &tmp); + + status = -EIO; + } + /* Stop the write operation */ + writel(0, &mac->mii_mgmt_cmd); + + /* + * set the registers we touched back to the state at which we entered + * this function + */ + writel(mii_addr, &mac->mii_mgmt_addr); + writel(mii_cmd, &mac->mii_mgmt_cmd); + + return status; +} + +/* Still used from _mac for BIT_READ */ +void et1310_phy_access_mii_bit(struct et131x_adapter *adapter, u16 action, + u16 regnum, u16 bitnum, u8 *value) +{ + u16 reg; + u16 mask = 0x0001 << bitnum; + + /* Read the requested register */ + et131x_mii_read(adapter, regnum, ®); + + switch (action) { + case TRUEPHY_BIT_READ: + *value = (reg & mask) >> bitnum; + break; + + case TRUEPHY_BIT_SET: + et131x_mii_write(adapter, regnum, reg | mask); + break; + + case TRUEPHY_BIT_CLEAR: + et131x_mii_write(adapter, regnum, reg & ~mask); + break; + + default: + break; + } +} + void et1310_config_flow_control(struct et131x_adapter *adapter) { struct phy_device *phydev = adapter->phydev; @@ -1476,156 +1660,6 @@ int et131x_mdio_reset(struct mii_bus *bus) return 0; } -int et131x_mii_read(struct et131x_adapter *adapter, u8 reg, u16 *value) -{ - struct phy_device *phydev = adapter->phydev; - - if (!phydev) - return -EIO; - - return et131x_phy_mii_read(adapter, phydev->addr, reg, value); -} - -/** - * et131x_phy_mii_read - Read from the PHY through the MII Interface on the MAC - * @adapter: pointer to our private adapter structure - * @addr: the address of the transceiver - * @reg: the register to read - * @value: pointer to a 16-bit value in which the value will be stored - * - * Returns 0 on success, errno on failure (as defined in errno.h) - */ -int et131x_phy_mii_read(struct et131x_adapter *adapter, u8 addr, - u8 reg, u16 *value) -{ - struct mac_regs __iomem *mac = &adapter->regs->mac; - int status = 0; - u32 delay = 0; - u32 mii_addr; - u32 mii_cmd; - u32 mii_indicator; - - /* Save a local copy of the registers we are dealing with so we can - * set them back - */ - mii_addr = readl(&mac->mii_mgmt_addr); - mii_cmd = readl(&mac->mii_mgmt_cmd); - - /* Stop the current operation */ - writel(0, &mac->mii_mgmt_cmd); - - /* Set up the register we need to read from on the correct PHY */ - writel(MII_ADDR(addr, reg), &mac->mii_mgmt_addr); - - writel(0x1, &mac->mii_mgmt_cmd); - - do { - udelay(50); - delay++; - mii_indicator = readl(&mac->mii_mgmt_indicator); - } while ((mii_indicator & MGMT_WAIT) && delay < 50); - - /* If we hit the max delay, we could not read the register */ - if (delay == 50) { - dev_warn(&adapter->pdev->dev, - "reg 0x%08x could not be read\n", reg); - dev_warn(&adapter->pdev->dev, "status is 0x%08x\n", - mii_indicator); - - status = -EIO; - } - - /* If we hit here we were able to read the register and we need to - * return the value to the caller */ - *value = readl(&mac->mii_mgmt_stat) & 0xFFFF; - - /* Stop the read operation */ - writel(0, &mac->mii_mgmt_cmd); - - /* set the registers we touched back to the state at which we entered - * this function - */ - writel(mii_addr, &mac->mii_mgmt_addr); - writel(mii_cmd, &mac->mii_mgmt_cmd); - - return status; -} - -/** - * et131x_mii_write - Write to a PHY register through the MII interface of the MAC - * @adapter: pointer to our private adapter structure - * @reg: the register to read - * @value: 16-bit value to write - * - * FIXME: one caller in netdev still - * - * Return 0 on success, errno on failure (as defined in errno.h) - */ -int et131x_mii_write(struct et131x_adapter *adapter, u8 reg, u16 value) -{ - struct mac_regs __iomem *mac = &adapter->regs->mac; - struct phy_device *phydev = adapter->phydev; - int status = 0; - u8 addr; - u32 delay = 0; - u32 mii_addr; - u32 mii_cmd; - u32 mii_indicator; - - if (!phydev) - return -EIO; - - addr = phydev->addr; - - /* Save a local copy of the registers we are dealing with so we can - * set them back - */ - mii_addr = readl(&mac->mii_mgmt_addr); - mii_cmd = readl(&mac->mii_mgmt_cmd); - - /* Stop the current operation */ - writel(0, &mac->mii_mgmt_cmd); - - /* Set up the register we need to write to on the correct PHY */ - writel(MII_ADDR(addr, reg), &mac->mii_mgmt_addr); - - /* Add the value to write to the registers to the mac */ - writel(value, &mac->mii_mgmt_ctrl); - - do { - udelay(50); - delay++; - mii_indicator = readl(&mac->mii_mgmt_indicator); - } while ((mii_indicator & MGMT_BUSY) && delay < 100); - - /* If we hit the max delay, we could not write the register */ - if (delay == 100) { - u16 tmp; - - dev_warn(&adapter->pdev->dev, - "reg 0x%08x could not be written", reg); - dev_warn(&adapter->pdev->dev, "status is 0x%08x\n", - mii_indicator); - dev_warn(&adapter->pdev->dev, "command is 0x%08x\n", - readl(&mac->mii_mgmt_cmd)); - - et131x_mii_read(adapter, reg, &tmp); - - status = -EIO; - } - /* Stop the write operation */ - writel(0, &mac->mii_mgmt_cmd); - - /* - * set the registers we touched back to the state at which we entered - * this function - */ - writel(mii_addr, &mac->mii_mgmt_addr); - writel(mii_cmd, &mac->mii_mgmt_cmd); - - return status; -} - /** * et1310_phy_power_down - PHY power control * @adapter: device to control @@ -1647,34 +1681,6 @@ void et1310_phy_power_down(struct et131x_adapter *adapter, bool down) et131x_mii_write(adapter, MII_BMCR, data); } -/* Still used from _mac for BIT_READ */ -void et1310_phy_access_mii_bit(struct et131x_adapter *adapter, u16 action, - u16 regnum, u16 bitnum, u8 *value) -{ - u16 reg; - u16 mask = 0x0001 << bitnum; - - /* Read the requested register */ - et131x_mii_read(adapter, regnum, ®); - - switch (action) { - case TRUEPHY_BIT_READ: - *value = (reg & mask) >> bitnum; - break; - - case TRUEPHY_BIT_SET: - et131x_mii_write(adapter, regnum, reg | mask); - break; - - case TRUEPHY_BIT_CLEAR: - et131x_mii_write(adapter, regnum, reg & ~mask); - break; - - default: - break; - } -} - /** * et131x_xcvr_init - Init the phy if we are setting it into force mode * @adapter: pointer to our private adapter structure @@ -1771,21 +1777,6 @@ void et131x_configure_global_regs(struct et131x_adapter *adapter) /* PM functions */ /** - * et1310_in_phy_coma - check if the device is in phy coma - * @adapter: pointer to our adapter structure - * - * Returns 0 if the device is not in phy coma, 1 if it is in phy coma - */ -int et1310_in_phy_coma(struct et131x_adapter *adapter) -{ - u32 pmcsr; - - pmcsr = readl(&adapter->regs->global.pm_csr); - - return ET_PM_PHY_SW_COMA & pmcsr ? 1 : 0; -} - -/** * et131x_config_rx_dma_regs - Start of Rx_DMA init sequence * @adapter: pointer to our adapter structure */ |