[SCSI] libsas: suspend / resume support

libsas power management routines to suspend and recover the sas domain
based on a model where the lldd is allowed and expected to be
"forgetful".

sas_suspend_ha - disable event processing allowing the lldd to take down
                 links without concern for causing hotplug events.
                 Regardless of whether the lldd actually posts link down
                 messages libsas notifies the lldd that all
                 domain_devices are gone.

sas_prep_resume_ha - on the way back up before the lldd starts link
                     training clean out any spurious events that were
                     generated on the way down, and re-enable event
                     processing

sas_resume_ha - after the lldd has started and decided that all phys
		have posted link-up events this routine is called to let
		libsas start it's own timeout of any phys that did not
		resume.  After the timeout an lldd can cancel the
                phy teardown by posting a link-up event.

Storage for ex_change_count (u16) and phy_change_count (u8) are changed
to int so they can be set to -1 to indicate 'invalidated'.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Jacek Danecki <jacek.danecki@intel.com>
Tested-by: Maciej Patelczyk <maciej.patelczyk@intel.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>

1 files changed, 89 insertions, 1 deletions

diff --git a/drivers/scsi/libsas/sas_init.c b/drivers/scsi/libsas/sas_init.c
index 014297c0588..dbc8a793fd8 100644
--- a/drivers/scsi/libsas/sas_init.c
+++ b/drivers/scsi/libsas/sas_init.c
@@ -178,7 +178,7 @@ Undo_phys:
 	return error;
 }
 
-int sas_unregister_ha(struct sas_ha_struct *sas_ha)
+static void sas_disable_events(struct sas_ha_struct *sas_ha)
 {
 	/* Set the state to unregistered to avoid further unchained
 	 * events to be queued, and flush any in-progress drainers
@@ -189,7 +189,11 @@ int sas_unregister_ha(struct sas_ha_struct *sas_ha)
 	spin_unlock_irq(&sas_ha->lock);
 	__sas_drain_work(sas_ha);
 	mutex_unlock(&sas_ha->drain_mutex);
+}
 
+int sas_unregister_ha(struct sas_ha_struct *sas_ha)
+{
+	sas_disable_events(sas_ha);
 	sas_unregister_ports(sas_ha);
 
 	/* flush unregistration work */
@@ -381,6 +385,90 @@ int sas_set_phy_speed(struct sas_phy *phy,
 	return ret;
 }
 
+void sas_prep_resume_ha(struct sas_ha_struct *ha)
+{
+	int i;
+
+	set_bit(SAS_HA_REGISTERED, &ha->state);
+
+	/* clear out any stale link events/data from the suspension path */
+	for (i = 0; i < ha->num_phys; i++) {
+		struct asd_sas_phy *phy = ha->sas_phy[i];
+
+		memset(phy->attached_sas_addr, 0, SAS_ADDR_SIZE);
+		phy->port_events_pending = 0;
+		phy->phy_events_pending = 0;
+		phy->frame_rcvd_size = 0;
+	}
+}
+EXPORT_SYMBOL(sas_prep_resume_ha);
+
+static int phys_suspended(struct sas_ha_struct *ha)
+{
+	int i, rc = 0;
+
+	for (i = 0; i < ha->num_phys; i++) {
+		struct asd_sas_phy *phy = ha->sas_phy[i];
+
+		if (phy->suspended)
+			rc++;
+	}
+
+	return rc;
+}
+
+void sas_resume_ha(struct sas_ha_struct *ha)
+{
+	const unsigned long tmo = msecs_to_jiffies(25000);
+	int i;
+
+	/* deform ports on phys that did not resume
+	 * at this point we may be racing the phy coming back (as posted
+	 * by the lldd).  So we post the event and once we are in the
+	 * libsas context check that the phy remains suspended before
+	 * tearing it down.
+	 */
+	i = phys_suspended(ha);
+	if (i)
+		dev_info(ha->dev, "waiting up to 25 seconds for %d phy%s to resume\n",
+			 i, i > 1 ? "s" : "");
+	wait_event_timeout(ha->eh_wait_q, phys_suspended(ha) == 0, tmo);
+	for (i = 0; i < ha->num_phys; i++) {
+		struct asd_sas_phy *phy = ha->sas_phy[i];
+
+		if (phy->suspended) {
+			dev_warn(&phy->phy->dev, "resume timeout\n");
+			sas_notify_phy_event(phy, PHYE_RESUME_TIMEOUT);
+		}
+	}
+
+	/* all phys are back up or timed out, turn on i/o so we can
+	 * flush out disks that did not return
+	 */
+	scsi_unblock_requests(ha->core.shost);
+	sas_drain_work(ha);
+}
+EXPORT_SYMBOL(sas_resume_ha);
+
+void sas_suspend_ha(struct sas_ha_struct *ha)
+{
+	int i;
+
+	sas_disable_events(ha);
+	scsi_block_requests(ha->core.shost);
+	for (i = 0; i < ha->num_phys; i++) {
+		struct asd_sas_port *port = ha->sas_port[i];
+
+		sas_discover_event(port, DISCE_SUSPEND);
+	}
+
+	/* flush suspend events while unregistered */
+	mutex_lock(&ha->drain_mutex);
+	__sas_drain_work(ha);
+	mutex_unlock(&ha->drain_mutex);
+}
+EXPORT_SYMBOL(sas_suspend_ha);
+
 static void sas_phy_release(struct sas_phy *phy)
 {
 	kfree(phy->hostdata);