Merge tag 'remoteproc-3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/ohad/remoteproc

Pull remoteproc update from Ohad Ben-Cohen:

 - Some refactoring, cleanups and small improvements from Sjur
   Brændeland.  The improvements are mainly about better supporting
   varios virtio properties (such as virtio's config space, status and
   features).  I now see that I messed up while commiting one of Sjur's
   patches and erroneously put myself as the author, as well as letting
   a nasty typo sneak in.  I will not fix this in order to avoid
   rebasing the patches.  Sjur - sorry!

 - A new remoteproc driver for OMAP-L13x (technically a DaVinci
   platform) from Robert Tivy.

 - Extend OMAP support to OMAP5 as well, from Vincent Stehlé.

 - Fix Kconfig VIRTUALIZATION dependency, from Suman Anna (a
   non-critical fix which arrived late during the rc cycle).

* tag 'remoteproc-3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/ohad/remoteproc:
  remoteproc: fix kconfig dependencies for VIRTIO
  remoteproc/davinci: add a remoteproc driver for OMAP-L13x DSP
  remoteproc: support default firmware name in rproc_alloc()
  remoteproc/omap: support OMAP5 too
  remoteproc: set vring addresses in resource table
  remoteproc: support virtio config space.
  remoteproc: perserve resource table data
  remoteproc: calculate max_notifyid by counting vrings
  remoteproc: code cleanup of resource parsing
  remoteproc: parse STE-firmware and find resource table address
  remoteproc: add find_loaded_rsc_table firmware ops
  remoteproc: refactor rproc_elf_find_rsc_table()

8 files changed, 668 insertions, 134 deletions

diff --git a/drivers/remoteproc/Kconfig b/drivers/remoteproc/Kconfig
index c6d77e20622..d4d377c40ec 100644
--- a/drivers/remoteproc/Kconfig
+++ b/drivers/remoteproc/Kconfig
@@ -4,13 +4,15 @@ menu "Remoteproc drivers"
 config REMOTEPROC
 	tristate
 	depends on HAS_DMA
+	select CRC32
 	select FW_LOADER
 	select VIRTIO
+	select VIRTUALIZATION
 
 config OMAP_REMOTEPROC
 	tristate "OMAP remoteproc support"
 	depends on HAS_DMA
-	depends on ARCH_OMAP4
+	depends on ARCH_OMAP4 || SOC_OMAP5
 	depends on OMAP_IOMMU
 	depends on OMAP_MBOX_FWK
 	select REMOTEPROC
@@ -38,4 +40,27 @@ config STE_MODEM_RPROC
 	  This can be either built-in or a loadable module.
 	  If unsure say N.
 
+config DA8XX_REMOTEPROC
+	tristate "DA8xx/OMAP-L13x remoteproc support"
+	depends on ARCH_DAVINCI_DA8XX
+	select CMA
+	select REMOTEPROC
+	select RPMSG
+	help
+	  Say y here to support DA8xx/OMAP-L13x remote processors via the
+	  remote processor framework.
+
+	  You want to say y here in order to enable AMP
+	  use-cases to run on your platform (multimedia codecs are
+	  offloaded to remote DSP processors using this framework).
+
+	  This module controls the name of the firmware file that gets
+	  loaded on the DSP.  This file must reside in the /lib/firmware
+	  directory.  It can be specified via the module parameter
+	  da8xx_fw_name=<filename>, and if not specified will default to
+	  "rproc-dsp-fw".
+
+	  It's safe to say n here if you're not interested in multimedia
+	  offloading.
+
 endmenu
diff --git a/drivers/remoteproc/Makefile b/drivers/remoteproc/Makefile
index 391b65181c0..ac2ff75686d 100644
--- a/drivers/remoteproc/Makefile
+++ b/drivers/remoteproc/Makefile
@@ -9,3 +9,4 @@ remoteproc-y				+= remoteproc_virtio.o
 remoteproc-y				+= remoteproc_elf_loader.o
 obj-$(CONFIG_OMAP_REMOTEPROC)		+= omap_remoteproc.o
 obj-$(CONFIG_STE_MODEM_RPROC)	 	+= ste_modem_rproc.o
+obj-$(CONFIG_DA8XX_REMOTEPROC)		+= da8xx_remoteproc.o
diff --git a/drivers/remoteproc/da8xx_remoteproc.c b/drivers/remoteproc/da8xx_remoteproc.c
new file mode 100644
index 00000000000..9b2e60afa1a
--- /dev/null
+++ b/drivers/remoteproc/da8xx_remoteproc.c
@@ -0,0 +1,324 @@
+/*
+ * Remote processor machine-specific module for DA8XX
+ *
+ * Copyright (C) 2013 Texas Instruments, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ */
+
+#include <linux/bitops.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/remoteproc.h>
+
+#include <mach/clock.h>   /* for davinci_clk_reset_assert/deassert() */
+
+#include "remoteproc_internal.h"
+
+static char *da8xx_fw_name;
+module_param(da8xx_fw_name, charp, S_IRUGO);
+MODULE_PARM_DESC(da8xx_fw_name,
+		 "\n\t\tName of DSP firmware file in /lib/firmware"
+		 " (if not specified defaults to 'rproc-dsp-fw')");
+
+/*
+ * OMAP-L138 Technical References:
+ * http://www.ti.com/product/omap-l138
+ */
+#define SYSCFG_CHIPSIG0 BIT(0)
+#define SYSCFG_CHIPSIG1 BIT(1)
+#define SYSCFG_CHIPSIG2 BIT(2)
+#define SYSCFG_CHIPSIG3 BIT(3)
+#define SYSCFG_CHIPSIG4 BIT(4)
+
+/**
+ * struct da8xx_rproc - da8xx remote processor instance state
+ * @rproc: rproc handle
+ * @dsp_clk: placeholder for platform's DSP clk
+ * @ack_fxn: chip-specific ack function for ack'ing irq
+ * @irq_data: ack_fxn function parameter
+ * @chipsig: virt ptr to DSP interrupt registers (CHIPSIG & CHIPSIG_CLR)
+ * @bootreg: virt ptr to DSP boot address register (HOST1CFG)
+ * @irq: irq # used by this instance
+ */
+struct da8xx_rproc {
+	struct rproc *rproc;
+	struct clk *dsp_clk;
+	void (*ack_fxn)(struct irq_data *data);
+	struct irq_data *irq_data;
+	void __iomem *chipsig;
+	void __iomem *bootreg;
+	int irq;
+};
+
+/**
+ * handle_event() - inbound virtqueue message workqueue function
+ *
+ * This function is registered as a kernel thread and is scheduled by the
+ * kernel handler.
+ */
+static irqreturn_t handle_event(int irq, void *p)
+{
+	struct rproc *rproc = (struct rproc *)p;
+
+	/* Process incoming buffers on all our vrings */
+	rproc_vq_interrupt(rproc, 0);
+	rproc_vq_interrupt(rproc, 1);
+
+	return IRQ_HANDLED;
+}
+
+/**
+ * da8xx_rproc_callback() - inbound virtqueue message handler
+ *
+ * This handler is invoked directly by the kernel whenever the remote
+ * core (DSP) has modified the state of a virtqueue.  There is no
+ * "payload" message indicating the virtqueue index as is the case with
+ * mailbox-based implementations on OMAP4.  As such, this handler "polls"
+ * each known virtqueue index for every invocation.
+ */
+static irqreturn_t da8xx_rproc_callback(int irq, void *p)
+{
+	struct rproc *rproc = (struct rproc *)p;
+	struct da8xx_rproc *drproc = (struct da8xx_rproc *)rproc->priv;
+	u32 chipsig;
+
+	chipsig = readl(drproc->chipsig);
+	if (chipsig & SYSCFG_CHIPSIG0) {
+		/* Clear interrupt level source */
+		writel(SYSCFG_CHIPSIG0, drproc->chipsig + 4);
+
+		/*
+		 * ACK intr to AINTC.
+		 *
+		 * It has already been ack'ed by the kernel before calling
+		 * this function, but since the ARM<->DSP interrupts in the
+		 * CHIPSIG register are "level" instead of "pulse" variety,
+		 * we need to ack it after taking down the level else we'll
+		 * be called again immediately after returning.
+		 */
+		drproc->ack_fxn(drproc->irq_data);
+
+		return IRQ_WAKE_THREAD;
+	}
+
+	return IRQ_HANDLED;
+}
+
+static int da8xx_rproc_start(struct rproc *rproc)
+{
+	struct device *dev = rproc->dev.parent;
+	struct da8xx_rproc *drproc = (struct da8xx_rproc *)rproc->priv;
+	struct clk *dsp_clk = drproc->dsp_clk;
+
+	/* hw requires the start (boot) address be on 1KB boundary */
+	if (rproc->bootaddr & 0x3ff) {
+		dev_err(dev, "invalid boot address: must be aligned to 1KB\n");
+
+		return -EINVAL;
+	}
+
+	writel(rproc->bootaddr, drproc->bootreg);
+
+	clk_enable(dsp_clk);
+	davinci_clk_reset_deassert(dsp_clk);
+
+	return 0;
+}
+
+static int da8xx_rproc_stop(struct rproc *rproc)
+{
+	struct da8xx_rproc *drproc = rproc->priv;
+
+	clk_disable(drproc->dsp_clk);
+
+	return 0;
+}
+
+/* kick a virtqueue */
+static void da8xx_rproc_kick(struct rproc *rproc, int vqid)
+{
+	struct da8xx_rproc *drproc = (struct da8xx_rproc *)rproc->priv;
+
+	/* Interupt remote proc */
+	writel(SYSCFG_CHIPSIG2, drproc->chipsig);
+}
+
+static struct rproc_ops da8xx_rproc_ops = {
+	.start = da8xx_rproc_start,
+	.stop = da8xx_rproc_stop,
+	.kick = da8xx_rproc_kick,
+};
+
+static int reset_assert(struct device *dev)
+{
+	struct clk *dsp_clk;
+
+	dsp_clk = clk_get(dev, NULL);
+	if (IS_ERR(dsp_clk)) {
+		dev_err(dev, "clk_get error: %ld\n", PTR_ERR(dsp_clk));
+		return PTR_RET(dsp_clk);
+	}
+
+	davinci_clk_reset_assert(dsp_clk);
+	clk_put(dsp_clk);
+
+	return 0;
+}
+
+static int da8xx_rproc_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct da8xx_rproc *drproc;
+	struct rproc *rproc;
+	struct irq_data *irq_data;
+	struct resource *bootreg_res;
+	struct resource *chipsig_res;
+	struct clk *dsp_clk;
+	void __iomem *chipsig;
+	void __iomem *bootreg;
+	int irq;
+	int ret;
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
+		dev_err(dev, "platform_get_irq(pdev, 0) error: %d\n", irq);
+		return irq;
+	}
+
+	irq_data = irq_get_irq_data(irq);
+	if (!irq_data) {
+		dev_err(dev, "irq_get_irq_data(%d): NULL\n", irq);
+		return -EINVAL;
+	}
+
+	bootreg_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!bootreg_res) {
+		dev_err(dev,
+			"platform_get_resource(IORESOURCE_MEM, 0): NULL\n");
+		return -EADDRNOTAVAIL;
+	}
+
+	chipsig_res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+	if (!chipsig_res) {
+		dev_err(dev,
+			"platform_get_resource(IORESOURCE_MEM, 1): NULL\n");
+		return -EADDRNOTAVAIL;
+	}
+
+	bootreg = devm_ioremap_resource(dev, bootreg_res);
+	if (IS_ERR(bootreg))
+		return PTR_ERR(bootreg);
+
+	chipsig = devm_ioremap_resource(dev, chipsig_res);
+	if (IS_ERR(chipsig))
+		return PTR_ERR(chipsig);
+
+	dsp_clk = devm_clk_get(dev, NULL);
+	if (IS_ERR(dsp_clk)) {
+		dev_err(dev, "clk_get error: %ld\n", PTR_ERR(dsp_clk));
+
+		return PTR_ERR(dsp_clk);
+	}
+
+	rproc = rproc_alloc(dev, "dsp", &da8xx_rproc_ops, da8xx_fw_name,
+		sizeof(*drproc));
+	if (!rproc)
+		return -ENOMEM;
+
+	drproc = rproc->priv;
+	drproc->rproc = rproc;
+
+	platform_set_drvdata(pdev, rproc);
+
+	/* everything the ISR needs is now setup, so hook it up */
+	ret = devm_request_threaded_irq(dev, irq, da8xx_rproc_callback,
+					handle_event, 0, "da8xx-remoteproc",
+					rproc);
+	if (ret) {
+		dev_err(dev, "devm_request_threaded_irq error: %d\n", ret);
+		goto free_rproc;
+	}
+
+	/*
+	 * rproc_add() can end up enabling the DSP's clk with the DSP
+	 * *not* in reset, but da8xx_rproc_start() needs the DSP to be
+	 * held in reset at the time it is called.
+	 */
+	ret = reset_assert(dev);
+	if (ret)
+		goto free_rproc;
+
+	drproc->chipsig = chipsig;
+	drproc->bootreg = bootreg;
+	drproc->ack_fxn = irq_data->chip->irq_ack;
+	drproc->irq_data = irq_data;
+	drproc->irq = irq;
+	drproc->dsp_clk = dsp_clk;
+
+	ret = rproc_add(rproc);
+	if (ret) {
+		dev_err(dev, "rproc_add failed: %d\n", ret);
+		goto free_rproc;
+	}
+
+	return 0;
+
+free_rproc:
+	rproc_put(rproc);
+
+	return ret;
+}
+
+static int da8xx_rproc_remove(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct rproc *rproc = platform_get_drvdata(pdev);
+	struct da8xx_rproc *drproc = (struct da8xx_rproc *)rproc->priv;
+
+	/*
+	 * It's important to place the DSP in reset before going away,
+	 * since a subsequent insmod of this module may enable the DSP's
+	 * clock before its program/boot-address has been loaded and
+	 * before this module's probe has had a chance to reset the DSP.
+	 * Without the reset, the DSP can lockup permanently when it
+	 * begins executing garbage.
+	 */
+	reset_assert(dev);
+
+	/*
+	 * The devm subsystem might end up releasing things before
+	 * freeing the irq, thus allowing an interrupt to sneak in while
+	 * the device is being removed.  This should prevent that.
+	 */
+	disable_irq(drproc->irq);
+
+	devm_clk_put(dev, drproc->dsp_clk);
+
+	rproc_del(rproc);
+	rproc_put(rproc);
+
+	return 0;
+}
+
+static struct platform_driver da8xx_rproc_driver = {
+	.probe = da8xx_rproc_probe,
+	.remove = da8xx_rproc_remove,
+	.driver = {
+		.name = "davinci-rproc",
+		.owner = THIS_MODULE,
+	},
+};
+
+module_platform_driver(da8xx_rproc_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("DA8XX Remote Processor control driver");
diff --git a/drivers/remoteproc/remoteproc_core.c b/drivers/remoteproc/remoteproc_core.c
index 814af5ab8a7..022dc635d01 100644
--- a/drivers/remoteproc/remoteproc_core.c
+++ b/drivers/remoteproc/remoteproc_core.c
@@ -37,6 +37,7 @@
 #include <linux/iommu.h>
 #include <linux/idr.h>
 #include <linux/elf.h>
+#include <linux/crc32.h>
 #include <linux/virtio_ids.h>
 #include <linux/virtio_ring.h>
 #include <asm/byteorder.h>
@@ -45,7 +46,8 @@
 
 typedef int (*rproc_handle_resources_t)(struct rproc *rproc,
 				struct resource_table *table, int len);
-typedef int (*rproc_handle_resource_t)(struct rproc *rproc, void *, int avail);
+typedef int (*rproc_handle_resource_t)(struct rproc *rproc,
+				 void *, int offset, int avail);
 
 /* Unique indices for remoteproc devices */
 static DEFINE_IDA(rproc_dev_index);
@@ -192,6 +194,7 @@ int rproc_alloc_vring(struct rproc_vdev *rvdev, int i)
 	struct rproc *rproc = rvdev->rproc;
 	struct device *dev = &rproc->dev;
 	struct rproc_vring *rvring = &rvdev->vring[i];
+	struct fw_rsc_vdev *rsc;
 	dma_addr_t dma;
 	void *va;
 	int ret, size, notifyid;
@@ -202,7 +205,6 @@ int rproc_alloc_vring(struct rproc_vdev *rvdev, int i)
 	/*
 	 * Allocate non-cacheable memory for the vring. In the future
 	 * this call will also configure the IOMMU for us
-	 * TODO: let the rproc know the da of this vring
 	 */
 	va = dma_alloc_coherent(dev->parent, size, &dma, GFP_KERNEL);
 	if (!va) {
@@ -213,7 +215,6 @@ int rproc_alloc_vring(struct rproc_vdev *rvdev, int i)
 	/*
 	 * Assign an rproc-wide unique index for this vring
 	 * TODO: assign a notifyid for rvdev updates as well
-	 * TODO: let the rproc know the notifyid of this vring
 	 * TODO: support predefined notifyids (via resource table)
 	 */
 	ret = idr_alloc(&rproc->notifyids, rvring, 0, 0, GFP_KERNEL);
@@ -224,9 +225,6 @@ int rproc_alloc_vring(struct rproc_vdev *rvdev, int i)
 	}
 	notifyid = ret;
 
-	/* Store largest notifyid */
-	rproc->max_notifyid = max(rproc->max_notifyid, notifyid);
-
 	dev_dbg(dev, "vring%d: va %p dma %llx size %x idr %d\n", i, va,
 				(unsigned long long)dma, size, notifyid);
 
@@ -234,6 +232,15 @@ int rproc_alloc_vring(struct rproc_vdev *rvdev, int i)
 	rvring->dma = dma;
 	rvring->notifyid = notifyid;
 
+	/*
+	 * Let the rproc know the notifyid and da of this vring.
+	 * Not all platforms use dma_alloc_coherent to automatically
+	 * set up the iommu. In this case the device address (da) will
+	 * hold the physical address and not the device address.
+	 */
+	rsc = (void *)rproc->table_ptr + rvdev->rsc_offset;
+	rsc->vring[i].da = dma;
+	rsc->vring[i].notifyid = notifyid;
 	return 0;
 }
 
@@ -268,25 +275,20 @@ rproc_parse_vring(struct rproc_vdev *rvdev, struct fw_rsc_vdev *rsc, int i)
 	return 0;
 }
 
-static int rproc_max_notifyid(int id, void *p, void *data)
-{
-	int *maxid = data;
-	*maxid = max(*maxid, id);
-	return 0;
-}
-
 void rproc_free_vring(struct rproc_vring *rvring)
 {
 	int size = PAGE_ALIGN(vring_size(rvring->len, rvring->align));
 	struct rproc *rproc = rvring->rvdev->rproc;
-	int maxid = 0;
+	int idx = rvring->rvdev->vring - rvring;
+	struct fw_rsc_vdev *rsc;
 
 	dma_free_coherent(rproc->dev.parent, size, rvring->va, rvring->dma);
 	idr_remove(&rproc->notifyids, rvring->notifyid);
 
-	/* Find the largest remaining notifyid */
-	idr_for_each(&rproc->notifyids, rproc_max_notifyid, &maxid);
-	rproc->max_notifyid = maxid;
+	/* reset resource entry info */
+	rsc = (void *)rproc->table_ptr + rvring->rvdev->rsc_offset;
+	rsc->vring[idx].da = 0;
+	rsc->vring[idx].notifyid = -1;
 }
 
 /**
@@ -317,7 +319,7 @@ void rproc_free_vring(struct rproc_vring *rvring)
  * Returns 0 on success, or an appropriate error code otherwise
  */
 static int rproc_handle_vdev(struct rproc *rproc, struct fw_rsc_vdev *rsc,
-								int avail)
+							int offset, int avail)
 {
 	struct device *dev = &rproc->dev;
 	struct rproc_vdev *rvdev;
@@ -358,8 +360,8 @@ static int rproc_handle_vdev(struct rproc *rproc, struct fw_rsc_vdev *rsc,
 			goto free_rvdev;
 	}
 
-	/* remember the device features */
-	rvdev->dfeatures = rsc->dfeatures;
+	/* remember the resource offset*/
+	rvdev->rsc_offset = offset;
 
 	list_add_tail(&rvdev->node, &rproc->rvdevs);
 
@@ -394,7 +396,7 @@ free_rvdev:
  * Returns 0 on success, or an appropriate error code otherwise
  */
 static int rproc_handle_trace(struct rproc *rproc, struct fw_rsc_trace *rsc,
-								int avail)
+							int offset, int avail)
 {
 	struct rproc_mem_entry *trace;
 	struct device *dev = &rproc->dev;
@@ -476,7 +478,7 @@ static int rproc_handle_trace(struct rproc *rproc, struct fw_rsc_trace *rsc,
  * are outside those ranges.
  */
 static int rproc_handle_devmem(struct rproc *rproc, struct fw_rsc_devmem *rsc,
-								int avail)
+							int offset, int avail)
 {
 	struct rproc_mem_entry *mapping;
 	struct device *dev = &rproc->dev;
@@ -549,7 +551,9 @@ out:
  * pressure is important; it may have a substantial impact on performance.
  */
 static int rproc_handle_carveout(struct rproc *rproc,
-				struct fw_rsc_carveout *rsc, int avail)
+						struct fw_rsc_carveout *rsc,
+						int offset, int avail)
+
 {
 	struct rproc_mem_entry *carveout, *mapping;
 	struct device *dev = &rproc->dev;
@@ -671,28 +675,45 @@ free_carv:
 	return ret;
 }
 
+static int rproc_count_vrings(struct rproc *rproc, struct fw_rsc_vdev *rsc,
+			      int offset, int avail)
+{
+	/* Summarize the number of notification IDs */
+	rproc->max_notifyid += rsc->num_of_vrings;
+
+	return 0;
+}
+
 /*
  * A lookup table for resource handlers. The indices are defined in
  * enum fw_resource_type.
  */
-static rproc_handle_resource_t rproc_handle_rsc[] = {
+static rproc_handle_resource_t rproc_loading_handlers[RSC_LAST] = {
 	[RSC_CARVEOUT] = (rproc_handle_resource_t)rproc_handle_carveout,
 	[RSC_DEVMEM] = (rproc_handle_resource_t)rproc_handle_devmem,
 	[RSC_TRACE] = (rproc_handle_resource_t)rproc_handle_trace,
 	[RSC_VDEV] = NULL, /* VDEVs were handled upon registrarion */
 };
 
+static rproc_handle_resource_t rproc_vdev_handler[RSC_LAST] = {
+	[RSC_VDEV] = (rproc_handle_resource_t)rproc_handle_vdev,
+};
+
+static rproc_handle_resource_t rproc_count_vrings_handler[RSC_LAST] = {
+	[RSC_VDEV] = (rproc_handle_resource_t)rproc_count_vrings,
+};
+
 /* handle firmware resource entries before booting the remote processor */
-static int
-rproc_handle_boot_rsc(struct rproc *rproc, struct resource_table *table, int len)
+static int rproc_handle_resources(struct rproc *rproc, int len,
+				  rproc_handle_resource_t handlers[RSC_LAST])
 {
 	struct device *dev = &rproc->dev;
 	rproc_handle_resource_t handler;
 	int ret = 0, i;
 
-	for (i = 0; i < table->num; i++) {
-		int offset = table->offset[i];
-		struct fw_rsc_hdr *hdr = (void *)table + offset;
+	for (i = 0; i < rproc->table_ptr->num; i++) {
+		int offset = rproc->table_ptr->offset[i];
+		struct fw_rsc_hdr *hdr = (void *)rproc->table_ptr + offset;
 		int avail = len - offset - sizeof(*hdr);
 		void *rsc = (void *)hdr + sizeof(*hdr);
 
@@ -709,45 +730,11 @@ rproc_handle_boot_rsc(struct rproc *rproc, struct resource_table *table, int len
 			continue;
 		}
 
-		handler = rproc_handle_rsc[hdr->type];
+		handler = handlers[hdr->type];
 		if (!handler)
 			continue;
 
-		ret = handler(rproc, rsc, avail);
-		if (ret)
-			break;
-	}
-
-	return ret;
-}
-
-/* handle firmware resource entries while registering the remote processor */
-static int
-rproc_handle_virtio_rsc(struct rproc *rproc, struct resource_table *table, int len)
-{
-	struct device *dev = &rproc->dev;
-	int ret = 0, i;
-
-	for (i = 0; i < table->num; i++) {
-		int offset = table->offset[i];
-		struct fw_rsc_hdr *hdr = (void *)table + offset;
-		int avail = len - offset - sizeof(*hdr);
-		struct fw_rsc_vdev *vrsc;
-
-		/* make sure table isn't truncated */
-		if (avail < 0) {
-			dev_err(dev, "rsc table is truncated\n");
-			return -EINVAL;
-		}
-
-		dev_dbg(dev, "%s: rsc type %d\n", __func__, hdr->type);
-
-		if (hdr->type != RSC_VDEV)
-			continue;
-
-		vrsc = (struct fw_rsc_vdev *)hdr->data;
-
-		ret = rproc_handle_vdev(rproc, vrsc, avail);
+		ret = handler(rproc, rsc, offset + sizeof(*hdr), avail);
 		if (ret)
 			break;
 	}
@@ -805,9 +792,12 @@ static int rproc_fw_boot(struct rproc *rproc, const struct firmware *fw)
 {
 	struct device *dev = &rproc->dev;
 	const char *name = rproc->firmware;
-	struct resource_table *table;
+	struct resource_table *table, *loaded_table;
 	int ret, tablesz;
 
+	if (!rproc->table_ptr)
+		return -ENOMEM;
+
 	ret = rproc_fw_sanity_check(rproc, fw);
 	if (ret)
 		return ret;
@@ -833,8 +823,15 @@ static int rproc_fw_boot(struct rproc *rproc, const struct firmware *fw)
 		goto clean_up;
 	}
 
+	/* Verify that resource table in loaded fw is unchanged */
+	if (rproc->table_csum != crc32(0, table, tablesz)) {
+		dev_err(dev, "resource checksum failed, fw changed?\n");
+		ret = -EINVAL;
+		goto clean_up;
+	}
+
 	/* handle fw resources which are required to boot rproc */
-	ret = rproc_handle_boot_rsc(rproc, table, tablesz);
+	ret = rproc_handle_resources(rproc, tablesz, rproc_loading_handlers);
 	if (ret) {
 		dev_err(dev, "Failed to process resources: %d\n", ret);
 		goto clean_up;
@@ -847,6 +844,19 @@ static int rproc_fw_boot(struct rproc *rproc, const struct firmware *fw)
 		goto clean_up;
 	}
 
+	/*
+	 * The starting device has been given the rproc->cached_table as the
+	 * resource table. The address of the vring along with the other
+	 * allocated resources (carveouts etc) is stored in cached_table.
+	 * In order to pass this information to the remote device we must
+	 * copy this information to device memory.
+	 */
+	loaded_table = rproc_find_loaded_rsc_table(rproc, fw);
+	if (!loaded_table)
+		goto clean_up;
+
+	memcpy(loaded_table, rproc->cached_table, tablesz);
+
 	/* power up the remote processor */
 	ret = rproc->ops->start(rproc);
 	if (ret) {
@@ -854,6 +864,13 @@ static int rproc_fw_boot(struct rproc *rproc, const struct firmware *fw)
 		goto clean_up;
 	}
 
+	/*
+	 * Update table_ptr so that all subsequent vring allocations and
+	 * virtio fields manipulation update the actual loaded resource table
+	 * in device memory.
+	 */
+	rproc->table_ptr = loaded_table;
+
 	rproc->state = RPROC_RUNNING;
 
 	dev_info(dev, "remote processor %s is now up\n", rproc->name);
@@ -888,11 +905,30 @@ static void rproc_fw_config_virtio(const struct firmware *fw, void *context)
 	if (!table)
 		goto out;
 
-	/* look for virtio devices and register them */
-	ret = rproc_handle_virtio_rsc(rproc, table, tablesz);
+	rproc->table_csum = crc32(0, table, tablesz);
+
+	/*
+	 * Create a copy of the resource table. When a virtio device starts
+	 * and calls vring_new_virtqueue() the address of the allocated vring
+	 * will be stored in the cached_table. Before the device is started,
+	 * cached_table will be copied into devic memory.
+	 */
+	rproc->cached_table = kmalloc(tablesz, GFP_KERNEL);
+	if (!rproc->cached_table)
+		goto out;
+
+	memcpy(rproc->cached_table, table, tablesz);
+	rproc->table_ptr = rproc->cached_table;
+
+	/* count the number of notify-ids */
+	rproc->max_notifyid = -1;
+	ret = rproc_handle_resources(rproc, tablesz, rproc_count_vrings_handler);
 	if (ret)
 		goto out;
 
+	/* look for virtio devices and register them */
+	ret = rproc_handle_resources(rproc, tablesz, rproc_vdev_handler);
+
 out:
 	release_firmware(fw);
 	/* allow rproc_del() contexts, if any, to proceed */
@@ -950,6 +986,9 @@ int rproc_trigger_recovery(struct rproc *rproc)
 	/* wait until there is no more rproc users */
 	wait_for_completion(&rproc->crash_comp);
 
+	/* Free the copy of the resource table */
+	kfree(rproc->cached_table);
+
 	return rproc_add_virtio_devices(rproc);
 }
 
@@ -1105,6 +1144,9 @@ void rproc_shutdown(struct rproc *rproc)
 
 	rproc_disable_iommu(rproc);
 
+	/* Give the next start a clean resource table */
+	rproc->table_ptr = rproc->cached_table;
+
 	/* if in crash state, unlock crash handler */
 	if (rproc->state == RPROC_CRASHED)
 		complete_all(&rproc->crash_comp);
@@ -1196,11 +1238,11 @@ static struct device_type rproc_type = {
  * @dev: the underlying device
  * @name: name of this remote processor
  * @ops: platform-specific handlers (mainly start/stop)
- * @firmware: name of firmware file to load
+ * @firmware: name of firmware file to load, can be NULL
  * @len: length of private data needed by the rproc driver (in bytes)
  *
  * Allocates a new remote processor handle, but does not register
- * it yet.
+ * it yet. if @firmware is NULL, a default name is used.
  *
  * This function should be used by rproc implementations during initialization
  * of the remote processor.
@@ -1219,19 +1261,39 @@ struct rproc *rproc_alloc(struct device *dev, const char *name,
 				const char *firmware, int len)
 {
 	struct rproc *rproc;
+	char *p, *template = "rproc-%s-fw";
+	int name_len = 0;
 
 	if (!dev || !name || !ops)
 		return NULL;
 
-	rproc = kzalloc(sizeof(struct rproc) + len, GFP_KERNEL);
+	if (!firmware)
+		/*
+		 * Make room for default firmware name (minus %s plus '\0').
+		 * If the caller didn't pass in a firmware name then
+		 * construct a default name.  We're already glomming 'len'
+		 * bytes onto the end of the struct rproc allocation, so do
+		 * a few more for the default firmware name (but only if
+		 * the caller doesn't pass one).
+		 */
+		name_len = strlen(name) + strlen(template) - 2 + 1;
+
+	rproc = kzalloc(sizeof(struct rproc) + len + name_len, GFP_KERNEL);
 	if (!rproc) {
 		dev_err(dev, "%s: kzalloc failed\n", __func__);
 		return NULL;
 	}
 
+	if (!firmware) {
+		p = (char *)rproc + sizeof(struct rproc) + len;
+		snprintf(p, name_len, template, name);
+	} else {
+		p = (char *)firmware;
+	}
+
+	rproc->firmware = p;
 	rproc->name = name;
 	rproc->ops = ops;
-	rproc->firmware = firmware;
 	rproc->priv = &rproc[1];
 
 	device_initialize(&rproc->dev);
@@ -1315,6 +1377,9 @@ int rproc_del(struct rproc *rproc)
 	list_for_each_entry_safe(rvdev, tmp, &rproc->rvdevs, node)
 		rproc_remove_virtio_dev(rvdev);
 
+	/* Free the copy of the resource table */
+	kfree(rproc->cached_table);
+
 	device_del(&rproc->dev);
 
 	return 0;
diff --git a/drivers/remoteproc/remoteproc_elf_loader.c b/drivers/remoteproc/remoteproc_elf_loader.c
index 0d36f94ab51..ce283a5b42a 100644
--- a/drivers/remoteproc/remoteproc_elf_loader.c
+++ b/drivers/remoteproc/remoteproc_elf_loader.c
@@ -208,41 +208,22 @@ rproc_elf_load_segments(struct rproc *rproc, const struct firmware *fw)
 	return ret;
 }
 
-/**
- * rproc_elf_find_rsc_table() - find the resource table
- * @rproc: the rproc handle
- * @fw: the ELF firmware image
- * @tablesz: place holder for providing back the table size
- *
- * This function finds the resource table inside the remote processor's
- * firmware. It is used both upon the registration of @rproc (in order
- * to look for and register the supported virito devices), and when the
- * @rproc is booted.
- *
- * Returns the pointer to the resource table if it is found, and write its
- * size into @tablesz. If a valid table isn't found, NULL is returned
- * (and @tablesz isn't set).
- */
-static struct resource_table *
-rproc_elf_find_rsc_table(struct rproc *rproc, const struct firmware *fw,
-							int *tablesz)
+static struct elf32_shdr *
+find_table(struct device *dev, struct elf32_hdr *ehdr, size_t fw_size)
 {
-	struct elf32_hdr *ehdr;
 	struct elf32_shdr *shdr;
+	int i;
 	const char *name_table;
-	struct device *dev = &rproc->dev;
 	struct resource_table *table = NULL;
-	int i;
-	const u8 *elf_data = fw->data;
+	const u8 *elf_data = (void *)ehdr;
 
-	ehdr = (struct elf32_hdr *)elf_data;
+	/* look for the resource table and handle it */
 	shdr = (struct elf32_shdr *)(elf_data + ehdr->e_shoff);
 	name_table = elf_data + shdr[ehdr->e_shstrndx].sh_offset;
 
-	/* look for the resource table and handle it */
 	for (i = 0; i < ehdr->e_shnum; i++, shdr++) {
-		int size = shdr->sh_size;
-		int offset = shdr->sh_offset;
+		u32 size = shdr->sh_size;
+		u32 offset = shdr->sh_offset;
 
 		if (strcmp(name_table + shdr->sh_name, ".resource_table"))
 			continue;
@@ -250,7 +231,7 @@ rproc_elf_find_rsc_table(struct rproc *rproc, const struct firmware *fw,
 		table = (struct resource_table *)(elf_data + offset);
 
 		/* make sure we have the entire table */
-		if (offset + size > fw->size) {
+		if (offset + size > fw_size || offset + size < size) {
 			dev_err(dev, "resource table truncated\n");
 			return NULL;
 		}
@@ -280,16 +261,77 @@ rproc_elf_find_rsc_table(struct rproc *rproc, const struct firmware *fw,
 			return NULL;
 		}
 
-		*tablesz = shdr->sh_size;
-		break;
+		return shdr;
 	}
 
+	return NULL;
+}
+
+/**
+ * rproc_elf_find_rsc_table() - find the resource table
+ * @rproc: the rproc handle
+ * @fw: the ELF firmware image
+ * @tablesz: place holder for providing back the table size
+ *
+ * This function finds the resource table inside the remote processor's
+ * firmware. It is used both upon the registration of @rproc (in order
+ * to look for and register the supported virito devices), and when the
+ * @rproc is booted.
+ *
+ * Returns the pointer to the resource table if it is found, and write its
+ * size into @tablesz. If a valid table isn't found, NULL is returned
+ * (and @tablesz isn't set).
+ */
+static struct resource_table *
+rproc_elf_find_rsc_table(struct rproc *rproc, const struct firmware *fw,
+			 int *tablesz)
+{
+	struct elf32_hdr *ehdr;
+	struct elf32_shdr *shdr;
+	struct device *dev = &rproc->dev;
+	struct resource_table *table = NULL;
+	const u8 *elf_data = fw->data;
+
+	ehdr = (struct elf32_hdr *)elf_data;
+
+	shdr = find_table(dev, ehdr, fw->size);
+	if (!shdr)
+		return NULL;
+
+	table = (struct resource_table *)(elf_data + shdr->sh_offset);
+	*tablesz = shdr->sh_size;
+
 	return table;
 }
 
+/**
+ * rproc_elf_find_loaded_rsc_table() - find the loaded resource table
+ * @rproc: the rproc handle
+ * @fw: the ELF firmware image
+ *
+ * This function finds the location of the loaded resource table. Don't
+ * call this function if the table wasn't loaded yet - it's a bug if you do.
+ *
+ * Returns the pointer to the resource table if it is found or NULL otherwise.
+ * If the table wasn't loaded yet the result is unspecified.
+ */
+static struct resource_table *
+rproc_elf_find_loaded_rsc_table(struct rproc *rproc, const struct firmware *fw)
+{
+	struct elf32_hdr *ehdr = (struct elf32_hdr *)fw->data;
+	struct elf32_shdr *shdr;
+
+	shdr = find_table(&rproc->dev, ehdr, fw->size);
+	if (!shdr)
+		return NULL;
+
+	return rproc_da_to_va(rproc, shdr->sh_addr, shdr->sh_size);
+}
+
 const struct rproc_fw_ops rproc_elf_fw_ops = {
 	.load = rproc_elf_load_segments,
 	.find_rsc_table = rproc_elf_find_rsc_table,
+	.find_loaded_rsc_table = rproc_elf_find_loaded_rsc_table,
 	.sanity_check = rproc_elf_sanity_check,
 	.get_boot_addr = rproc_elf_get_boot_addr
 };
diff --git a/drivers/remoteproc/remoteproc_internal.h b/drivers/remoteproc/remoteproc_internal.h
index 7bb66482d06..157e762c157 100644
--- a/drivers/remoteproc/remoteproc_internal.h
+++ b/drivers/remoteproc/remoteproc_internal.h
@@ -27,7 +27,8 @@ struct rproc;
 
 /**
  * struct rproc_fw_ops - firmware format specific operations.
- * @find_rsc_table:	finds the resource table inside the firmware image
+ * @find_rsc_table:	find the resource table inside the firmware image
+ * @find_loaded_rsc_table: find the loaded resouce table
  * @load:		load firmeware to memory, where the remote processor
  *			expects to find it
  * @sanity_check:	sanity check the fw image
@@ -37,6 +38,8 @@ struct rproc_fw_ops {
 	struct resource_table *(*find_rsc_table) (struct rproc *rproc,
 						const struct firmware *fw,
 						int *tablesz);
+	struct resource_table *(*find_loaded_rsc_table)(struct rproc *rproc,
+						const struct firmware *fw);
 	int (*load)(struct rproc *rproc, const struct firmware *fw);
 	int (*sanity_check)(struct rproc *rproc, const struct firmware *fw);
 	u32 (*get_boot_addr)(struct rproc *rproc, const struct firmware *fw);
@@ -102,6 +105,16 @@ struct resource_table *rproc_find_rsc_table(struct rproc *rproc,
 	return NULL;
 }
 
+static inline
+struct resource_table *rproc_find_loaded_rsc_table(struct rproc *rproc,
+                                const struct firmware *fw)
+{
+	if (rproc->fw_ops->find_loaded_rsc_table)
+		return rproc->fw_ops->find_loaded_rsc_table(rproc, fw);
+
+        return NULL;
+}
+
 extern const struct rproc_fw_ops rproc_elf_fw_ops;
 
 #endif /* REMOTEPROC_INTERNAL_H */
diff --git a/drivers/remoteproc/remoteproc_virtio.c b/drivers/remoteproc/remoteproc_virtio.c
index afed9b7731c..b09c75c21b6 100644
--- a/drivers/remoteproc/remoteproc_virtio.c
+++ b/drivers/remoteproc/remoteproc_virtio.c
@@ -173,25 +173,35 @@ error:
 	return ret;
 }
 
-/*
- * We don't support yet real virtio status semantics.
- *
- * The plan is to provide this via the VDEV resource entry
- * which is part of the firmware: this way the remote processor
- * will be able to access the status values as set by us.
- */
 static u8 rproc_virtio_get_status(struct virtio_device *vdev)
 {
-	return 0;
+	struct rproc_vdev *rvdev = vdev_to_rvdev(vdev);
+	struct fw_rsc_vdev *rsc;
+
+	rsc = (void *)rvdev->rproc->table_ptr + rvdev->rsc_offset;
+
+	return rsc->status;
 }
 
 static void rproc_virtio_set_status(struct virtio_device *vdev, u8 status)
 {
+	struct rproc_vdev *rvdev = vdev_to_rvdev(vdev);
+	struct fw_rsc_vdev *rsc;
+
+	rsc = (void *)rvdev->rproc->table_ptr + rvdev->rsc_offset;
+
+	rsc->status = status;
 	dev_dbg(&vdev->dev, "status: %d\n", status);
 }
 
 static void rproc_virtio_reset(struct virtio_device *vdev)
 {
+	struct rproc_vdev *rvdev = vdev_to_rvdev(vdev);
+	struct fw_rsc_vdev *rsc;
+
+	rsc = (void *)rvdev->rproc->table_ptr + rvdev->rsc_offset;
+
+	rsc->status = 0;
 	dev_dbg(&vdev->dev, "reset !\n");
 }
 
@@ -199,13 +209,19 @@ static void rproc_virtio_reset(struct virtio_device *vdev)
 static u32 rproc_virtio_get_features(struct virtio_device *vdev)
 {
 	struct rproc_vdev *rvdev = vdev_to_rvdev(vdev);
+	struct fw_rsc_vdev *rsc;
+
+	rsc = (void *)rvdev->rproc->table_ptr + rvdev->rsc_offset;
 
-	return rvdev->dfeatures;
+	return rsc->dfeatures;
 }
 
 static void rproc_virtio_finalize_features(struct virtio_device *vdev)
 {
 	struct rproc_vdev *rvdev = vdev_to_rvdev(vdev);
+	struct fw_rsc_vdev *rsc;
+
+	rsc = (void *)rvdev->rproc->table_ptr + rvdev->rsc_offset;
 
 	/* Give virtio_ring a chance to accept features */
 	vring_transport_features(vdev);
@@ -213,13 +229,44 @@ static void rproc_virtio_finalize_features(struct virtio_device *vdev)
 	/*
 	 * Remember the finalized features of our vdev, and provide it
 	 * to the remote processor once it is powered on.
-	 *
-	 * Similarly to the status field, we don't expose yet the negotiated
-	 * features to the remote processors at this point. This will be
-	 * fixed as part of a small resource table overhaul and then an
-	 * extension of the virtio resource entries.
 	 */
-	rvdev->gfeatures = vdev->features[0];
+	rsc->gfeatures = vdev->features[0];
+}
+
+static void rproc_virtio_get(struct virtio_device *vdev, unsigned offset,
+							void *buf, unsigned len)
+{
+	struct rproc_vdev *rvdev = vdev_to_rvdev(vdev);
+	struct fw_rsc_vdev *rsc;
+	void *cfg;
+
+	rsc = (void *)rvdev->rproc->table_ptr + rvdev->rsc_offset;
+	cfg = &rsc->vring[rsc->num_of_vrings];
+
+	if (offset + len > rsc->config_len || offset + len < len) {
+		dev_err(&vdev->dev, "rproc_virtio_get: access out of bounds\n");
+		return;
+	}
+
+	memcpy(buf, cfg + offset, len);
+}
+
+static void rproc_virtio_set(struct virtio_device *vdev, unsigned offset,
+		      const void *buf, unsigned len)
+{
+	struct rproc_vdev *rvdev = vdev_to_rvdev(vdev);
+	struct fw_rsc_vdev *rsc;
+	void *cfg;
+
+	rsc = (void *)rvdev->rproc->table_ptr + rvdev->rsc_offset;
+	cfg = &rsc->vring[rsc->num_of_vrings];
+
+	if (offset + len > rsc->config_len || offset + len < len) {
+		dev_err(&vdev->dev, "rproc_virtio_set: access out of bounds\n");
+		return;
+	}
+
+	memcpy(cfg + offset, buf, len);
 }
 
 static const struct virtio_config_ops rproc_virtio_config_ops = {
@@ -230,6 +277,8 @@ static const struct virtio_config_ops rproc_virtio_config_ops = {
 	.reset		= rproc_virtio_reset,
 	.set_status	= rproc_virtio_set_status,
 	.get_status	= rproc_virtio_get_status,
+	.get		= rproc_virtio_get,
+	.set		= rproc_virtio_set,
 };
 
 /*
diff --git a/drivers/remoteproc/ste_modem_rproc.c b/drivers/remoteproc/ste_modem_rproc.c
index fb95c422005..1ec39a4c0b3 100644
--- a/drivers/remoteproc/ste_modem_rproc.c
+++ b/drivers/remoteproc/ste_modem_rproc.c
@@ -64,26 +64,18 @@ static int sproc_load_segments(struct rproc *rproc, const struct firmware *fw)
 }
 
 /* Find the entry for resource table in the Table of Content */
-static struct ste_toc_entry *sproc_find_rsc_entry(const struct firmware *fw)
+static const struct ste_toc_entry *sproc_find_rsc_entry(const void *data)
 {
 	int i;
-	struct ste_toc *toc;
-
-	if (!fw)
-		return NULL;
-
-	toc = (void *)fw->data;
+	const struct ste_toc *toc;
+	toc = data;
 
 	/* Search the table for the resource table */
 	for (i = 0; i < SPROC_MAX_TOC_ENTRIES &&
 		    toc->table[i].start != 0xffffffff; i++) {
-
 		if (!strncmp(toc->table[i].name, SPROC_RESOURCE_NAME,
-			     sizeof(toc->table[i].name))) {
-			if (toc->table[i].start > fw->size)
-				return NULL;
+			     sizeof(toc->table[i].name)))
 			return &toc->table[i];
-		}
 	}
 
 	return NULL;
@@ -96,9 +88,12 @@ sproc_find_rsc_table(struct rproc *rproc, const struct firmware *fw,
 {
 	struct sproc *sproc = rproc->priv;
 	struct resource_table *table;
-	struct ste_toc_entry *entry;
+	const struct ste_toc_entry *entry;
 
-	entry = sproc_find_rsc_entry(fw);
+	if (!fw)
+		return NULL;
+
+	entry = sproc_find_rsc_entry(fw->data);
 	if (!entry) {
 		sproc_err(sproc, "resource table not found in fw\n");
 		return NULL;
@@ -149,10 +144,30 @@ sproc_find_rsc_table(struct rproc *rproc, const struct firmware *fw,
 	return table;
 }
 
+/* Find the resource table inside the remote processor's firmware. */
+static struct resource_table *
+sproc_find_loaded_rsc_table(struct rproc *rproc, const struct firmware *fw)
+{
+	struct sproc *sproc = rproc->priv;
+	const struct ste_toc_entry *entry;
+
+	if (!fw || !sproc->fw_addr)
+		return NULL;
+
+	entry = sproc_find_rsc_entry(sproc->fw_addr);
+	if (!entry) {
+		sproc_err(sproc, "resource table not found in fw\n");
+		return NULL;
+	}
+
+	return sproc->fw_addr + entry->start;
+}
+
 /* STE modem firmware handler operations */
 const struct rproc_fw_ops sproc_fw_ops = {
 	.load = sproc_load_segments,
 	.find_rsc_table = sproc_find_rsc_table,
+	.find_loaded_rsc_table = sproc_find_loaded_rsc_table,
 };
 
 /* Kick the modem with specified notification id */
@@ -198,7 +213,7 @@ static int sproc_start(struct rproc *rproc)
 	}
 
 	/* Subscribe to notifications */
-	for (i = 0; i < rproc->max_notifyid; i++) {
+	for (i = 0; i <= rproc->max_notifyid; i++) {
 		err = sproc->mdev->ops.kick_subscribe(sproc->mdev, i);
 		if (err) {
 			sproc_err(sproc,