summaryrefslogtreecommitdiff
path: root/drivers/parisc/iosapic.c
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 15:20:36 -0700
committerLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 15:20:36 -0700
commit1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch)
tree0bba044c4ce775e45a88a51686b5d9f90697ea9d /drivers/parisc/iosapic.c
downloadlinux-3.10-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.tar.gz
linux-3.10-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.tar.bz2
linux-3.10-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.zip
Linux-2.6.12-rc2v2.6.12-rc2
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
Diffstat (limited to 'drivers/parisc/iosapic.c')
-rw-r--r--drivers/parisc/iosapic.c921
1 files changed, 921 insertions, 0 deletions
diff --git a/drivers/parisc/iosapic.c b/drivers/parisc/iosapic.c
new file mode 100644
index 00000000000..91df0bf181d
--- /dev/null
+++ b/drivers/parisc/iosapic.c
@@ -0,0 +1,921 @@
+/*
+** I/O Sapic Driver - PCI interrupt line support
+**
+** (c) Copyright 1999 Grant Grundler
+** (c) Copyright 1999 Hewlett-Packard Company
+**
+** This program is free software; you can redistribute it and/or modify
+** it under the terms of the GNU General Public License as published by
+** the Free Software Foundation; either version 2 of the License, or
+** (at your option) any later version.
+**
+** The I/O sapic driver manages the Interrupt Redirection Table which is
+** the control logic to convert PCI line based interrupts into a Message
+** Signaled Interrupt (aka Transaction Based Interrupt, TBI).
+**
+** Acronyms
+** --------
+** HPA Hard Physical Address (aka MMIO address)
+** IRQ Interrupt ReQuest. Implies Line based interrupt.
+** IRT Interrupt Routing Table (provided by PAT firmware)
+** IRdT Interrupt Redirection Table. IRQ line to TXN ADDR/DATA
+** table which is implemented in I/O SAPIC.
+** ISR Interrupt Service Routine. aka Interrupt handler.
+** MSI Message Signaled Interrupt. PCI 2.2 functionality.
+** aka Transaction Based Interrupt (or TBI).
+** PA Precision Architecture. HP's RISC architecture.
+** RISC Reduced Instruction Set Computer.
+**
+**
+** What's a Message Signalled Interrupt?
+** -------------------------------------
+** MSI is a write transaction which targets a processor and is similar
+** to a processor write to memory or MMIO. MSIs can be generated by I/O
+** devices as well as processors and require *architecture* to work.
+**
+** PA only supports MSI. So I/O subsystems must either natively generate
+** MSIs (e.g. GSC or HP-PB) or convert line based interrupts into MSIs
+** (e.g. PCI and EISA). IA64 supports MSIs via a "local SAPIC" which
+** acts on behalf of a processor.
+**
+** MSI allows any I/O device to interrupt any processor. This makes
+** load balancing of the interrupt processing possible on an SMP platform.
+** Interrupts are also ordered WRT to DMA data. It's possible on I/O
+** coherent systems to completely eliminate PIO reads from the interrupt
+** path. The device and driver must be designed and implemented to
+** guarantee all DMA has been issued (issues about atomicity here)
+** before the MSI is issued. I/O status can then safely be read from
+** DMA'd data by the ISR.
+**
+**
+** PA Firmware
+** -----------
+** PA-RISC platforms have two fundementally different types of firmware.
+** For PCI devices, "Legacy" PDC initializes the "INTERRUPT_LINE" register
+** and BARs similar to a traditional PC BIOS.
+** The newer "PAT" firmware supports PDC calls which return tables.
+** PAT firmware only initializes PCI Console and Boot interface.
+** With these tables, the OS can progam all other PCI devices.
+**
+** One such PAT PDC call returns the "Interrupt Routing Table" (IRT).
+** The IRT maps each PCI slot's INTA-D "output" line to an I/O SAPIC
+** input line. If the IRT is not available, this driver assumes
+** INTERRUPT_LINE register has been programmed by firmware. The latter
+** case also means online addition of PCI cards can NOT be supported
+** even if HW support is present.
+**
+** All platforms with PAT firmware to date (Oct 1999) use one Interrupt
+** Routing Table for the entire platform.
+**
+** Where's the iosapic?
+** --------------------
+** I/O sapic is part of the "Core Electronics Complex". And on HP platforms
+** it's integrated as part of the PCI bus adapter, "lba". So no bus walk
+** will discover I/O Sapic. I/O Sapic driver learns about each device
+** when lba driver advertises the presence of the I/O sapic by calling
+** iosapic_register().
+**
+**
+** IRQ handling notes
+** ------------------
+** The IO-SAPIC can indicate to the CPU which interrupt was asserted.
+** So, unlike the GSC-ASIC and Dino, we allocate one CPU interrupt per
+** IO-SAPIC interrupt and call the device driver's handler directly.
+** The IO-SAPIC driver hijacks the CPU interrupt handler so it can
+** issue the End Of Interrupt command to the IO-SAPIC.
+**
+** Overview of exported iosapic functions
+** --------------------------------------
+** (caveat: code isn't finished yet - this is just the plan)
+**
+** iosapic_init:
+** o initialize globals (lock, etc)
+** o try to read IRT. Presence of IRT determines if this is
+** a PAT platform or not.
+**
+** iosapic_register():
+** o create iosapic_info instance data structure
+** o allocate vector_info array for this iosapic
+** o initialize vector_info - read corresponding IRdT?
+**
+** iosapic_xlate_pin: (only called by fixup_irq for PAT platform)
+** o intr_pin = read cfg (INTERRUPT_PIN);
+** o if (device under PCI-PCI bridge)
+** translate slot/pin
+**
+** iosapic_fixup_irq:
+** o if PAT platform (IRT present)
+** intr_pin = iosapic_xlate_pin(isi,pcidev):
+** intr_line = find IRT entry(isi, PCI_SLOT(pcidev), intr_pin)
+** save IRT entry into vector_info later
+** write cfg INTERRUPT_LINE (with intr_line)?
+** else
+** intr_line = pcidev->irq
+** IRT pointer = NULL
+** endif
+** o locate vector_info (needs: isi, intr_line)
+** o allocate processor "irq" and get txn_addr/data
+** o request_irq(processor_irq, iosapic_interrupt, vector_info,...)
+**
+** iosapic_enable_irq:
+** o clear any pending IRQ on that line
+** o enable IRdT - call enable_irq(vector[line]->processor_irq)
+** o write EOI in case line is already asserted.
+**
+** iosapic_disable_irq:
+** o disable IRdT - call disable_irq(vector[line]->processor_irq)
+*/
+
+
+/* FIXME: determine which include files are really needed */
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/spinlock.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+
+#include <asm/byteorder.h> /* get in-line asm for swab */
+#include <asm/pdc.h>
+#include <asm/pdcpat.h>
+#include <asm/page.h>
+#include <asm/system.h>
+#include <asm/io.h> /* read/write functions */
+#ifdef CONFIG_SUPERIO
+#include <asm/superio.h>
+#endif
+
+#include <asm/iosapic.h>
+#include "./iosapic_private.h"
+
+#define MODULE_NAME "iosapic"
+
+/* "local" compile flags */
+#undef PCI_BRIDGE_FUNCS
+#undef DEBUG_IOSAPIC
+#undef DEBUG_IOSAPIC_IRT
+
+
+#ifdef DEBUG_IOSAPIC
+#define DBG(x...) printk(x)
+#else /* DEBUG_IOSAPIC */
+#define DBG(x...)
+#endif /* DEBUG_IOSAPIC */
+
+#ifdef DEBUG_IOSAPIC_IRT
+#define DBG_IRT(x...) printk(x)
+#else
+#define DBG_IRT(x...)
+#endif
+
+#ifdef CONFIG_64BIT
+#define COMPARE_IRTE_ADDR(irte, hpa) ((irte)->dest_iosapic_addr == (hpa))
+#else
+#define COMPARE_IRTE_ADDR(irte, hpa) \
+ ((irte)->dest_iosapic_addr == ((hpa) | 0xffffffff00000000ULL))
+#endif
+
+#define IOSAPIC_REG_SELECT 0x00
+#define IOSAPIC_REG_WINDOW 0x10
+#define IOSAPIC_REG_EOI 0x40
+
+#define IOSAPIC_REG_VERSION 0x1
+
+#define IOSAPIC_IRDT_ENTRY(idx) (0x10+(idx)*2)
+#define IOSAPIC_IRDT_ENTRY_HI(idx) (0x11+(idx)*2)
+
+static inline unsigned int iosapic_read(void __iomem *iosapic, unsigned int reg)
+{
+ writel(reg, iosapic + IOSAPIC_REG_SELECT);
+ return readl(iosapic + IOSAPIC_REG_WINDOW);
+}
+
+static inline void iosapic_write(void __iomem *iosapic, unsigned int reg, u32 val)
+{
+ writel(reg, iosapic + IOSAPIC_REG_SELECT);
+ writel(val, iosapic + IOSAPIC_REG_WINDOW);
+}
+
+#define IOSAPIC_VERSION_MASK 0x000000ff
+#define IOSAPIC_VERSION(ver) ((int) (ver & IOSAPIC_VERSION_MASK))
+
+#define IOSAPIC_MAX_ENTRY_MASK 0x00ff0000
+#define IOSAPIC_MAX_ENTRY_SHIFT 0x10
+#define IOSAPIC_IRDT_MAX_ENTRY(ver) \
+ (int) (((ver) & IOSAPIC_MAX_ENTRY_MASK) >> IOSAPIC_MAX_ENTRY_SHIFT)
+
+/* bits in the "low" I/O Sapic IRdT entry */
+#define IOSAPIC_IRDT_ENABLE 0x10000
+#define IOSAPIC_IRDT_PO_LOW 0x02000
+#define IOSAPIC_IRDT_LEVEL_TRIG 0x08000
+#define IOSAPIC_IRDT_MODE_LPRI 0x00100
+
+/* bits in the "high" I/O Sapic IRdT entry */
+#define IOSAPIC_IRDT_ID_EID_SHIFT 0x10
+
+
+static spinlock_t iosapic_lock = SPIN_LOCK_UNLOCKED;
+
+static inline void iosapic_eoi(void __iomem *addr, unsigned int data)
+{
+ __raw_writel(data, addr);
+}
+
+/*
+** REVISIT: future platforms may have more than one IRT.
+** If so, the following three fields form a structure which
+** then be linked into a list. Names are chosen to make searching
+** for them easy - not necessarily accurate (eg "cell").
+**
+** Alternative: iosapic_info could point to the IRT it's in.
+** iosapic_register() could search a list of IRT's.
+*/
+static struct irt_entry *irt_cell;
+static size_t irt_num_entry;
+
+static struct irt_entry *iosapic_alloc_irt(int num_entries)
+{
+ unsigned long a;
+
+ /* The IRT needs to be 8-byte aligned for the PDC call.
+ * Normally kmalloc would guarantee larger alignment, but
+ * if CONFIG_DEBUG_SLAB is enabled, then we can get only
+ * 4-byte alignment on 32-bit kernels
+ */
+ a = (unsigned long)kmalloc(sizeof(struct irt_entry) * num_entries + 8, GFP_KERNEL);
+ a = (a + 7) & ~7;
+ return (struct irt_entry *)a;
+}
+
+/**
+ * iosapic_load_irt - Fill in the interrupt routing table
+ * @cell_num: The cell number of the CPU we're currently executing on
+ * @irt: The address to place the new IRT at
+ * @return The number of entries found
+ *
+ * The "Get PCI INT Routing Table Size" option returns the number of
+ * entries in the PCI interrupt routing table for the cell specified
+ * in the cell_number argument. The cell number must be for a cell
+ * within the caller's protection domain.
+ *
+ * The "Get PCI INT Routing Table" option returns, for the cell
+ * specified in the cell_number argument, the PCI interrupt routing
+ * table in the caller allocated memory pointed to by mem_addr.
+ * We assume the IRT only contains entries for I/O SAPIC and
+ * calculate the size based on the size of I/O sapic entries.
+ *
+ * The PCI interrupt routing table entry format is derived from the
+ * IA64 SAL Specification 2.4. The PCI interrupt routing table defines
+ * the routing of PCI interrupt signals between the PCI device output
+ * "pins" and the IO SAPICs' input "lines" (including core I/O PCI
+ * devices). This table does NOT include information for devices/slots
+ * behind PCI to PCI bridges. See PCI to PCI Bridge Architecture Spec.
+ * for the architected method of routing of IRQ's behind PPB's.
+ */
+
+
+static int __init
+iosapic_load_irt(unsigned long cell_num, struct irt_entry **irt)
+{
+ long status; /* PDC return value status */
+ struct irt_entry *table; /* start of interrupt routing tbl */
+ unsigned long num_entries = 0UL;
+
+ BUG_ON(!irt);
+
+ if (is_pdc_pat()) {
+ /* Use pat pdc routine to get interrupt routing table size */
+ DBG("calling get_irt_size (cell %ld)\n", cell_num);
+ status = pdc_pat_get_irt_size(&num_entries, cell_num);
+ DBG("get_irt_size: %ld\n", status);
+
+ BUG_ON(status != PDC_OK);
+ BUG_ON(num_entries == 0);
+
+ /*
+ ** allocate memory for interrupt routing table
+ ** This interface isn't really right. We are assuming
+ ** the contents of the table are exclusively
+ ** for I/O sapic devices.
+ */
+ table = iosapic_alloc_irt(num_entries);
+ if (table == NULL) {
+ printk(KERN_WARNING MODULE_NAME ": read_irt : can "
+ "not alloc mem for IRT\n");
+ return 0;
+ }
+
+ /* get PCI INT routing table */
+ status = pdc_pat_get_irt(table, cell_num);
+ DBG("pdc_pat_get_irt: %ld\n", status);
+ WARN_ON(status != PDC_OK);
+ } else {
+ /*
+ ** C3000/J5000 (and similar) platforms with Sprockets PDC
+ ** will return exactly one IRT for all iosapics.
+ ** So if we have one, don't need to get it again.
+ */
+ if (irt_cell)
+ return 0;
+
+ /* Should be using the Elroy's HPA, but it's ignored anyway */
+ status = pdc_pci_irt_size(&num_entries, 0);
+ DBG("pdc_pci_irt_size: %ld\n", status);
+
+ if (status != PDC_OK) {
+ /* Not a "legacy" system with I/O SAPIC either */
+ return 0;
+ }
+
+ BUG_ON(num_entries == 0);
+
+ table = iosapic_alloc_irt(num_entries);
+ if (!table) {
+ printk(KERN_WARNING MODULE_NAME ": read_irt : can "
+ "not alloc mem for IRT\n");
+ return 0;
+ }
+
+ /* HPA ignored by this call too. */
+ status = pdc_pci_irt(num_entries, 0, table);
+ BUG_ON(status != PDC_OK);
+ }
+
+ /* return interrupt table address */
+ *irt = table;
+
+#ifdef DEBUG_IOSAPIC_IRT
+{
+ struct irt_entry *p = table;
+ int i;
+
+ printk(MODULE_NAME " Interrupt Routing Table (cell %ld)\n", cell_num);
+ printk(MODULE_NAME " start = 0x%p num_entries %ld entry_size %d\n",
+ table,
+ num_entries,
+ (int) sizeof(struct irt_entry));
+
+ for (i = 0 ; i < num_entries ; i++, p++) {
+ printk(MODULE_NAME " %02x %02x %02x %02x %02x %02x %02x %02x %08x%08x\n",
+ p->entry_type, p->entry_length, p->interrupt_type,
+ p->polarity_trigger, p->src_bus_irq_devno, p->src_bus_id,
+ p->src_seg_id, p->dest_iosapic_intin,
+ ((u32 *) p)[2],
+ ((u32 *) p)[3]
+ );
+ }
+}
+#endif /* DEBUG_IOSAPIC_IRT */
+
+ return num_entries;
+}
+
+
+
+void __init iosapic_init(void)
+{
+ unsigned long cell = 0;
+
+ DBG("iosapic_init()\n");
+
+#ifdef __LP64__
+ if (is_pdc_pat()) {
+ int status;
+ struct pdc_pat_cell_num cell_info;
+
+ status = pdc_pat_cell_get_number(&cell_info);
+ if (status == PDC_OK) {
+ cell = cell_info.cell_num;
+ }
+ }
+#endif
+
+ /* get interrupt routing table for this cell */
+ irt_num_entry = iosapic_load_irt(cell, &irt_cell);
+ if (irt_num_entry == 0)
+ irt_cell = NULL; /* old PDC w/o iosapic */
+}
+
+
+/*
+** Return the IRT entry in case we need to look something else up.
+*/
+static struct irt_entry *
+irt_find_irqline(struct iosapic_info *isi, u8 slot, u8 intr_pin)
+{
+ struct irt_entry *i = irt_cell;
+ int cnt; /* track how many entries we've looked at */
+ u8 irq_devno = (slot << IRT_DEV_SHIFT) | (intr_pin-1);
+
+ DBG_IRT("irt_find_irqline() SLOT %d pin %d\n", slot, intr_pin);
+
+ for (cnt=0; cnt < irt_num_entry; cnt++, i++) {
+
+ /*
+ ** Validate: entry_type, entry_length, interrupt_type
+ **
+ ** Difference between validate vs compare is the former
+ ** should print debug info and is not expected to "fail"
+ ** on current platforms.
+ */
+ if (i->entry_type != IRT_IOSAPIC_TYPE) {
+ DBG_IRT(KERN_WARNING MODULE_NAME ":find_irqline(0x%p): skipping entry %d type %d\n", i, cnt, i->entry_type);
+ continue;
+ }
+
+ if (i->entry_length != IRT_IOSAPIC_LENGTH) {
+ DBG_IRT(KERN_WARNING MODULE_NAME ":find_irqline(0x%p): skipping entry %d length %d\n", i, cnt, i->entry_length);
+ continue;
+ }
+
+ if (i->interrupt_type != IRT_VECTORED_INTR) {
+ DBG_IRT(KERN_WARNING MODULE_NAME ":find_irqline(0x%p): skipping entry %d interrupt_type %d\n", i, cnt, i->interrupt_type);
+ continue;
+ }
+
+ if (!COMPARE_IRTE_ADDR(i, isi->isi_hpa))
+ continue;
+
+ if ((i->src_bus_irq_devno & IRT_IRQ_DEVNO_MASK) != irq_devno)
+ continue;
+
+ /*
+ ** Ignore: src_bus_id and rc_seg_id correlate with
+ ** iosapic_info->isi_hpa on HP platforms.
+ ** If needed, pass in "PFA" (aka config space addr)
+ ** instead of slot.
+ */
+
+ /* Found it! */
+ return i;
+ }
+
+ printk(KERN_WARNING MODULE_NAME ": 0x%lx : no IRT entry for slot %d, pin %d\n",
+ isi->isi_hpa, slot, intr_pin);
+ return NULL;
+}
+
+
+/*
+** xlate_pin() supports the skewing of IRQ lines done by subsidiary bridges.
+** Legacy PDC already does this translation for us and stores it in INTR_LINE.
+**
+** PAT PDC needs to basically do what legacy PDC does:
+** o read PIN
+** o adjust PIN in case device is "behind" a PPB
+** (eg 4-port 100BT and SCSI/LAN "Combo Card")
+** o convert slot/pin to I/O SAPIC input line.
+**
+** HP platforms only support:
+** o one level of skewing for any number of PPBs
+** o only support PCI-PCI Bridges.
+*/
+static struct irt_entry *
+iosapic_xlate_pin(struct iosapic_info *isi, struct pci_dev *pcidev)
+{
+ u8 intr_pin, intr_slot;
+
+ pci_read_config_byte(pcidev, PCI_INTERRUPT_PIN, &intr_pin);
+
+ DBG_IRT("iosapic_xlate_pin(%s) SLOT %d pin %d\n",
+ pcidev->slot_name, PCI_SLOT(pcidev->devfn), intr_pin);
+
+ if (intr_pin == 0) {
+ /* The device does NOT support/use IRQ lines. */
+ return NULL;
+ }
+
+ /* Check if pcidev behind a PPB */
+ if (NULL != pcidev->bus->self) {
+ /* Convert pcidev INTR_PIN into something we
+ ** can lookup in the IRT.
+ */
+#ifdef PCI_BRIDGE_FUNCS
+ /*
+ ** Proposal #1:
+ **
+ ** call implementation specific translation function
+ ** This is architecturally "cleaner". HP-UX doesn't
+ ** support other secondary bus types (eg. E/ISA) directly.
+ ** May be needed for other processor (eg IA64) architectures
+ ** or by some ambitous soul who wants to watch TV.
+ */
+ if (pci_bridge_funcs->xlate_intr_line) {
+ intr_pin = pci_bridge_funcs->xlate_intr_line(pcidev);
+ }
+#else /* PCI_BRIDGE_FUNCS */
+ struct pci_bus *p = pcidev->bus;
+ /*
+ ** Proposal #2:
+ ** The "pin" is skewed ((pin + dev - 1) % 4).
+ **
+ ** This isn't very clean since I/O SAPIC must assume:
+ ** - all platforms only have PCI busses.
+ ** - only PCI-PCI bridge (eg not PCI-EISA, PCI-PCMCIA)
+ ** - IRQ routing is only skewed once regardless of
+ ** the number of PPB's between iosapic and device.
+ ** (Bit3 expansion chassis follows this rule)
+ **
+ ** Advantage is it's really easy to implement.
+ */
+ intr_pin = ((intr_pin-1)+PCI_SLOT(pcidev->devfn)) % 4;
+ intr_pin++; /* convert back to INTA-D (1-4) */
+#endif /* PCI_BRIDGE_FUNCS */
+
+ /*
+ ** Locate the host slot the PPB nearest the Host bus
+ ** adapter.
+ */
+ while (NULL != p->parent->self)
+ p = p->parent;
+
+ intr_slot = PCI_SLOT(p->self->devfn);
+ } else {
+ intr_slot = PCI_SLOT(pcidev->devfn);
+ }
+ DBG_IRT("iosapic_xlate_pin: bus %d slot %d pin %d\n",
+ pcidev->bus->secondary, intr_slot, intr_pin);
+
+ return irt_find_irqline(isi, intr_slot, intr_pin);
+}
+
+static void iosapic_rd_irt_entry(struct vector_info *vi , u32 *dp0, u32 *dp1)
+{
+ struct iosapic_info *isp = vi->iosapic;
+ u8 idx = vi->irqline;
+
+ *dp0 = iosapic_read(isp->addr, IOSAPIC_IRDT_ENTRY(idx));
+ *dp1 = iosapic_read(isp->addr, IOSAPIC_IRDT_ENTRY_HI(idx));
+}
+
+
+static void iosapic_wr_irt_entry(struct vector_info *vi, u32 dp0, u32 dp1)
+{
+ struct iosapic_info *isp = vi->iosapic;
+
+ DBG_IRT("iosapic_wr_irt_entry(): irq %d hpa %lx 0x%x 0x%x\n",
+ vi->irqline, isp->isi_hpa, dp0, dp1);
+
+ iosapic_write(isp->addr, IOSAPIC_IRDT_ENTRY(vi->irqline), dp0);
+
+ /* Read the window register to flush the writes down to HW */
+ dp0 = readl(isp->addr+IOSAPIC_REG_WINDOW);
+
+ iosapic_write(isp->addr, IOSAPIC_IRDT_ENTRY_HI(vi->irqline), dp1);
+
+ /* Read the window register to flush the writes down to HW */
+ dp1 = readl(isp->addr+IOSAPIC_REG_WINDOW);
+}
+
+/*
+** set_irt prepares the data (dp0, dp1) according to the vector_info
+** and target cpu (id_eid). dp0/dp1 are then used to program I/O SAPIC
+** IRdT for the given "vector" (aka IRQ line).
+*/
+static void
+iosapic_set_irt_data( struct vector_info *vi, u32 *dp0, u32 *dp1)
+{
+ u32 mode = 0;
+ struct irt_entry *p = vi->irte;
+
+ if ((p->polarity_trigger & IRT_PO_MASK) == IRT_ACTIVE_LO)
+ mode |= IOSAPIC_IRDT_PO_LOW;
+
+ if (((p->polarity_trigger >> IRT_EL_SHIFT) & IRT_EL_MASK) == IRT_LEVEL_TRIG)
+ mode |= IOSAPIC_IRDT_LEVEL_TRIG;
+
+ /*
+ ** IA64 REVISIT
+ ** PA doesn't support EXTINT or LPRIO bits.
+ */
+
+ *dp0 = mode | (u32) vi->txn_data;
+
+ /*
+ ** Extracting id_eid isn't a real clean way of getting it.
+ ** But the encoding is the same for both PA and IA64 platforms.
+ */
+ if (is_pdc_pat()) {
+ /*
+ ** PAT PDC just hands it to us "right".
+ ** txn_addr comes from cpu_data[x].txn_addr.
+ */
+ *dp1 = (u32) (vi->txn_addr);
+ } else {
+ /*
+ ** eg if base_addr == 0xfffa0000),
+ ** we want to get 0xa0ff0000.
+ **
+ ** eid 0x0ff00000 -> 0x00ff0000
+ ** id 0x000ff000 -> 0xff000000
+ */
+ *dp1 = (((u32)vi->txn_addr & 0x0ff00000) >> 4) |
+ (((u32)vi->txn_addr & 0x000ff000) << 12);
+ }
+ DBG_IRT("iosapic_set_irt_data(): 0x%x 0x%x\n", *dp0, *dp1);
+}
+
+
+static struct vector_info *iosapic_get_vector(unsigned int irq)
+{
+ return irq_desc[irq].handler_data;
+}
+
+static void iosapic_disable_irq(unsigned int irq)
+{
+ unsigned long flags;
+ struct vector_info *vi = iosapic_get_vector(irq);
+ u32 d0, d1;
+
+ spin_lock_irqsave(&iosapic_lock, flags);
+ iosapic_rd_irt_entry(vi, &d0, &d1);
+ d0 |= IOSAPIC_IRDT_ENABLE;
+ iosapic_wr_irt_entry(vi, d0, d1);
+ spin_unlock_irqrestore(&iosapic_lock, flags);
+}
+
+static void iosapic_enable_irq(unsigned int irq)
+{
+ struct vector_info *vi = iosapic_get_vector(irq);
+ u32 d0, d1;
+
+ /* data is initialized by fixup_irq */
+ WARN_ON(vi->txn_irq == 0);
+
+ iosapic_set_irt_data(vi, &d0, &d1);
+ iosapic_wr_irt_entry(vi, d0, d1);
+
+#ifdef DEBUG_IOSAPIC_IRT
+{
+ u32 *t = (u32 *) ((ulong) vi->eoi_addr & ~0xffUL);
+ printk("iosapic_enable_irq(): regs %p", vi->eoi_addr);
+ for ( ; t < vi->eoi_addr; t++)
+ printk(" %x", readl(t));
+ printk("\n");
+}
+
+printk("iosapic_enable_irq(): sel ");
+{
+ struct iosapic_info *isp = vi->iosapic;
+
+ for (d0=0x10; d0<0x1e; d0++) {
+ d1 = iosapic_read(isp->addr, d0);
+ printk(" %x", d1);
+ }
+}
+printk("\n");
+#endif
+
+ /*
+ * Issuing I/O SAPIC an EOI causes an interrupt IFF IRQ line is
+ * asserted. IRQ generally should not be asserted when a driver
+ * enables their IRQ. It can lead to "interesting" race conditions
+ * in the driver initialization sequence.
+ */
+ DBG(KERN_DEBUG "enable_irq(%d): eoi(%p, 0x%x)\n", irq,
+ vi->eoi_addr, vi->eoi_data);
+ iosapic_eoi(vi->eoi_addr, vi->eoi_data);
+}
+
+/*
+ * PARISC only supports PCI devices below I/O SAPIC.
+ * PCI only supports level triggered in order to share IRQ lines.
+ * ergo I/O SAPIC must always issue EOI on parisc.
+ *
+ * i386/ia64 support ISA devices and have to deal with
+ * edge-triggered interrupts too.
+ */
+static void iosapic_end_irq(unsigned int irq)
+{
+ struct vector_info *vi = iosapic_get_vector(irq);
+ DBG(KERN_DEBUG "end_irq(%d): eoi(%p, 0x%x)\n", irq,
+ vi->eoi_addr, vi->eoi_data);
+ iosapic_eoi(vi->eoi_addr, vi->eoi_data);
+}
+
+static unsigned int iosapic_startup_irq(unsigned int irq)
+{
+ iosapic_enable_irq(irq);
+ return 0;
+}
+
+static struct hw_interrupt_type iosapic_interrupt_type = {
+ .typename = "IO-SAPIC-level",
+ .startup = iosapic_startup_irq,
+ .shutdown = iosapic_disable_irq,
+ .enable = iosapic_enable_irq,
+ .disable = iosapic_disable_irq,
+ .ack = no_ack_irq,
+ .end = iosapic_end_irq,
+// .set_affinity = iosapic_set_affinity_irq,
+};
+
+int iosapic_fixup_irq(void *isi_obj, struct pci_dev *pcidev)
+{
+ struct iosapic_info *isi = isi_obj;
+ struct irt_entry *irte = NULL; /* only used if PAT PDC */
+ struct vector_info *vi;
+ int isi_line; /* line used by device */
+
+ if (!isi) {
+ printk(KERN_WARNING MODULE_NAME ": hpa not registered for %s\n",
+ pci_name(pcidev));
+ return -1;
+ }
+
+#ifdef CONFIG_SUPERIO
+ /*
+ * HACK ALERT! (non-compliant PCI device support)
+ *
+ * All SuckyIO interrupts are routed through the PIC's on function 1.
+ * But SuckyIO OHCI USB controller gets an IRT entry anyway because
+ * it advertises INT D for INT_PIN. Use that IRT entry to get the
+ * SuckyIO interrupt routing for PICs on function 1 (*BLEECCHH*).
+ */
+ if (is_superio_device(pcidev)) {
+ /* We must call superio_fixup_irq() to register the pdev */
+ pcidev->irq = superio_fixup_irq(pcidev);
+
+ /* Don't return if need to program the IOSAPIC's IRT... */
+ if (PCI_FUNC(pcidev->devfn) != SUPERIO_USB_FN)
+ return pcidev->irq;
+ }
+#endif /* CONFIG_SUPERIO */
+
+ /* lookup IRT entry for isi/slot/pin set */
+ irte = iosapic_xlate_pin(isi, pcidev);
+ if (!irte) {
+ printk("iosapic: no IRTE for %s (IRQ not connected?)\n",
+ pci_name(pcidev));
+ return -1;
+ }
+ DBG_IRT("iosapic_fixup_irq(): irte %p %x %x %x %x %x %x %x %x\n",
+ irte,
+ irte->entry_type,
+ irte->entry_length,
+ irte->polarity_trigger,
+ irte->src_bus_irq_devno,
+ irte->src_bus_id,
+ irte->src_seg_id,
+ irte->dest_iosapic_intin,
+ (u32) irte->dest_iosapic_addr);
+ isi_line = irte->dest_iosapic_intin;
+
+ /* get vector info for this input line */
+ vi = isi->isi_vector + isi_line;
+ DBG_IRT("iosapic_fixup_irq: line %d vi 0x%p\n", isi_line, vi);
+
+ /* If this IRQ line has already been setup, skip it */
+ if (vi->irte)
+ goto out;
+
+ vi->irte = irte;
+
+ /*
+ * Allocate processor IRQ
+ *
+ * XXX/FIXME The txn_alloc_irq() code and related code should be
+ * moved to enable_irq(). That way we only allocate processor IRQ
+ * bits for devices that actually have drivers claiming them.
+ * Right now we assign an IRQ to every PCI device present,
+ * regardless of whether it's used or not.
+ */
+ vi->txn_irq = txn_alloc_irq(8);
+
+ if (vi->txn_irq < 0)
+ panic("I/O sapic: couldn't get TXN IRQ\n");
+
+ /* enable_irq() will use txn_* to program IRdT */
+ vi->txn_addr = txn_alloc_addr(vi->txn_irq);
+ vi->txn_data = txn_alloc_data(vi->txn_irq);
+
+ vi->eoi_addr = isi->addr + IOSAPIC_REG_EOI;
+ vi->eoi_data = cpu_to_le32(vi->txn_data);
+
+ cpu_claim_irq(vi->txn_irq, &iosapic_interrupt_type, vi);
+
+ out:
+ pcidev->irq = vi->txn_irq;
+
+ DBG_IRT("iosapic_fixup_irq() %d:%d %x %x line %d irq %d\n",
+ PCI_SLOT(pcidev->devfn), PCI_FUNC(pcidev->devfn),
+ pcidev->vendor, pcidev->device, isi_line, pcidev->irq);
+
+ return pcidev->irq;
+}
+
+
+/*
+** squirrel away the I/O Sapic Version
+*/
+static unsigned int
+iosapic_rd_version(struct iosapic_info *isi)
+{
+ return iosapic_read(isi->addr, IOSAPIC_REG_VERSION);
+}
+
+
+/*
+** iosapic_register() is called by "drivers" with an integrated I/O SAPIC.
+** Caller must be certain they have an I/O SAPIC and know its MMIO address.
+**
+** o allocate iosapic_info and add it to the list
+** o read iosapic version and squirrel that away
+** o read size of IRdT.
+** o allocate and initialize isi_vector[]
+** o allocate irq region
+*/
+void *iosapic_register(unsigned long hpa)
+{
+ struct iosapic_info *isi = NULL;
+ struct irt_entry *irte = irt_cell;
+ struct vector_info *vip;
+ int cnt; /* track how many entries we've looked at */
+
+ /*
+ * Astro based platforms can only support PCI OLARD if they implement
+ * PAT PDC. Legacy PDC omits LBAs with no PCI devices from the IRT.
+ * Search the IRT and ignore iosapic's which aren't in the IRT.
+ */
+ for (cnt=0; cnt < irt_num_entry; cnt++, irte++) {
+ WARN_ON(IRT_IOSAPIC_TYPE != irte->entry_type);
+ if (COMPARE_IRTE_ADDR(irte, hpa))
+ break;
+ }
+
+ if (cnt >= irt_num_entry) {
+ DBG("iosapic_register() ignoring 0x%lx (NOT FOUND)\n", hpa);
+ return NULL;
+ }
+
+ isi = (struct iosapic_info *)kmalloc(sizeof(struct iosapic_info), GFP_KERNEL);
+ if (!isi) {
+ BUG();
+ return NULL;
+ }
+
+ memset(isi, 0, sizeof(struct iosapic_info));
+
+ isi->addr = ioremap(hpa, 4096);
+ isi->isi_hpa = hpa;
+ isi->isi_version = iosapic_rd_version(isi);
+ isi->isi_num_vectors = IOSAPIC_IRDT_MAX_ENTRY(isi->isi_version) + 1;
+
+ vip = isi->isi_vector = (struct vector_info *)
+ kmalloc(sizeof(struct vector_info) * isi->isi_num_vectors, GFP_KERNEL);
+ if (vip == NULL) {
+ kfree(isi);
+ return NULL;
+ }
+
+ memset(vip, 0, sizeof(struct vector_info) * isi->isi_num_vectors);
+
+ for (cnt=0; cnt < isi->isi_num_vectors; cnt++, vip++) {
+ vip->irqline = (unsigned char) cnt;
+ vip->iosapic = isi;
+ }
+ return isi;
+}
+
+
+#ifdef DEBUG_IOSAPIC
+
+static void
+iosapic_prt_irt(void *irt, long num_entry)
+{
+ unsigned int i, *irp = (unsigned int *) irt;
+
+
+ printk(KERN_DEBUG MODULE_NAME ": Interrupt Routing Table (%lx entries)\n", num_entry);
+
+ for (i=0; i<num_entry; i++, irp += 4) {
+ printk(KERN_DEBUG "%p : %2d %.8x %.8x %.8x %.8x\n",
+ irp, i, irp[0], irp[1], irp[2], irp[3]);
+ }
+}
+
+
+static void
+iosapic_prt_vi(struct vector_info *vi)
+{
+ printk(KERN_DEBUG MODULE_NAME ": vector_info[%d] is at %p\n", vi->irqline, vi);
+ printk(KERN_DEBUG "\t\tstatus: %.4x\n", vi->status);
+ printk(KERN_DEBUG "\t\ttxn_irq: %d\n", vi->txn_irq);
+ printk(KERN_DEBUG "\t\ttxn_addr: %lx\n", vi->txn_addr);
+ printk(KERN_DEBUG "\t\ttxn_data: %lx\n", vi->txn_data);
+ printk(KERN_DEBUG "\t\teoi_addr: %p\n", vi->eoi_addr);
+ printk(KERN_DEBUG "\t\teoi_data: %x\n", vi->eoi_data);
+}
+
+
+static void
+iosapic_prt_isi(struct iosapic_info *isi)
+{
+ printk(KERN_DEBUG MODULE_NAME ": io_sapic_info at %p\n", isi);
+ printk(KERN_DEBUG "\t\tisi_hpa: %lx\n", isi->isi_hpa);
+ printk(KERN_DEBUG "\t\tisi_status: %x\n", isi->isi_status);
+ printk(KERN_DEBUG "\t\tisi_version: %x\n", isi->isi_version);
+ printk(KERN_DEBUG "\t\tisi_vector: %p\n", isi->isi_vector);
+}
+#endif /* DEBUG_IOSAPIC */