diff options
| author | Michael Chan <mchan@broadcom.com> | 2006-05-26 17:48:07 -0700 |
|---|---|---|
| committer | David S. Miller <davem@sunset.davemloft.net> | 2006-06-17 21:26:26 -0700 |
| commit | df3e6548186f0baa727cd6d3a492891854bd31f2 (patch) | |
| tree | 525617b51451b730b0723d57258c6a8bf7f53d09 /drivers/net/tg3.h | |
| parent | 30b6c28d2aca4669f2e609ad5d77ea2a6cf0dd3a (diff) | |
| download | linux-3.10-df3e6548186f0baa727cd6d3a492891854bd31f2.tar.gz linux-3.10-df3e6548186f0baa727cd6d3a492891854bd31f2.tar.bz2 linux-3.10-df3e6548186f0baa727cd6d3a492891854bd31f2.zip | |
[TG3]: Add recovery logic when MMIOs are re-ordered
Add recovery logic when we suspect that the system is re-ordering
MMIOs. Re-ordered MMIOs to the send mailbox can cause bogus tx
completions and hit BUG_ON() in the tx completion path.
tg3 already has logic to handle re-ordered MMIOs by flushing the MMIOs
that must be strictly ordered (such as the send mailbox). Determining
when to enable the flush is currently a manual process of adding known
chipsets to a list.
The new code replaces the BUG_ON() in the tx completion path with the
call to tg3_tx_recover(). It will set the TG3_FLAG_MBOX_WRITE_REORDER
flag and reset the chip later in the workqueue to recover and start
flushing MMIOs to the mailbox.
A message to report the problem will be printed. We will then decide
whether or not to add the host bridge to the list of chipsets that do
re-ordering.
We may add some additional code later to print the host bridge's ID so
that the user can report it more easily.
The assumption that re-ordering can only happen on x86 systems is also
removed.
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers/net/tg3.h')
| -rw-r--r-- | drivers/net/tg3.h | 5 |
1 files changed, 1 insertions, 4 deletions
diff --git a/drivers/net/tg3.h b/drivers/net/tg3.h index ff0faab94bd..35669e18065 100644 --- a/drivers/net/tg3.h +++ b/drivers/net/tg3.h @@ -2155,11 +2155,7 @@ struct tg3 { #define TG3_FLAG_ENABLE_ASF 0x00000020 #define TG3_FLAG_5701_REG_WRITE_BUG 0x00000040 #define TG3_FLAG_POLL_SERDES 0x00000080 -#if defined(CONFIG_X86) #define TG3_FLAG_MBOX_WRITE_REORDER 0x00000100 -#else -#define TG3_FLAG_MBOX_WRITE_REORDER 0 /* disables code too */ -#endif #define TG3_FLAG_PCIX_TARGET_HWBUG 0x00000200 #define TG3_FLAG_WOL_SPEED_100MB 0x00000400 #define TG3_FLAG_WOL_ENABLE 0x00000800 @@ -2172,6 +2168,7 @@ struct tg3 { #define TG3_FLAG_PCI_HIGH_SPEED 0x00040000 #define TG3_FLAG_PCI_32BIT 0x00080000 #define TG3_FLAG_SRAM_USE_CONFIG 0x00100000 +#define TG3_FLAG_TX_RECOVERY_PENDING 0x00200000 #define TG3_FLAG_SERDES_WOL_CAP 0x00400000 #define TG3_FLAG_JUMBO_RING_ENABLE 0x00800000 #define TG3_FLAG_10_100_ONLY 0x01000000 |