summaryrefslogtreecommitdiff
path: root/drivers/net/tg3.c
diff options
context:
space:
mode:
authorMichael Chan <mchan@broadcom.com>2006-12-07 00:21:14 -0800
committerDavid S. Miller <davem@davemloft.net>2006-12-07 00:21:14 -0800
commit9d26e213423923c9e033ccd373705118131827c9 (patch)
tree182ec37041687479c2e4697463e77a1b195b9d26 /drivers/net/tg3.c
parent676917d488212303ce4a7d033815ce8799201010 (diff)
downloadlinux-3.10-9d26e213423923c9e033ccd373705118131827c9.tar.gz
linux-3.10-9d26e213423923c9e033ccd373705118131827c9.tar.bz2
linux-3.10-9d26e213423923c9e033ccd373705118131827c9.zip
[TG3]: Add TG3_FLG2_IS_NIC flag.
Add Tg3_FLG2_IS_NIC flag to unambiguously determine whether the device is NIC or onboard. Previously, the EEPROM_WRITE_PROT flag was overloaded to also mean onboard. With the separation, we can support some devices that are onboard but do not use eeprom write protect. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers/net/tg3.c')
-rw-r--r--drivers/net/tg3.c37
1 files changed, 24 insertions, 13 deletions
diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index 5514828b792..16bc05fe531 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -1062,7 +1062,7 @@ static void tg3_frob_aux_power(struct tg3 *tp)
{
struct tg3 *tp_peer = tp;
- if ((tp->tg3_flags & TG3_FLAG_EEPROM_WRITE_PROT) != 0)
+ if ((tp->tg3_flags2 & TG3_FLG2_IS_NIC) == 0)
return;
if ((GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5704) ||
@@ -1213,8 +1213,8 @@ static int tg3_set_power_state(struct tg3 *tp, pci_power_t state)
power_control);
udelay(100); /* Delay after power state change */
- /* Switch out of Vaux if it is not a LOM */
- if (!(tp->tg3_flags & TG3_FLAG_EEPROM_WRITE_PROT))
+ /* Switch out of Vaux if it is a NIC */
+ if (tp->tg3_flags2 & TG3_FLG2_IS_NIC)
tw32_wait_f(GRC_LOCAL_CTRL, tp->grc_local_ctrl, 100);
return 0;
@@ -6397,16 +6397,17 @@ static int tg3_reset_hw(struct tg3 *tp, int reset_phy)
udelay(40);
/* tp->grc_local_ctrl is partially set up during tg3_get_invariants().
- * If TG3_FLAG_EEPROM_WRITE_PROT is set, we should read the
+ * If TG3_FLG2_IS_NIC is zero, we should read the
* register to preserve the GPIO settings for LOMs. The GPIOs,
* whether used as inputs or outputs, are set by boot code after
* reset.
*/
- if (tp->tg3_flags & TG3_FLAG_EEPROM_WRITE_PROT) {
+ if (!(tp->tg3_flags2 & TG3_FLG2_IS_NIC)) {
u32 gpio_mask;
- gpio_mask = GRC_LCLCTRL_GPIO_OE0 | GRC_LCLCTRL_GPIO_OE2 |
- GRC_LCLCTRL_GPIO_OUTPUT0 | GRC_LCLCTRL_GPIO_OUTPUT2;
+ gpio_mask = GRC_LCLCTRL_GPIO_OE0 | GRC_LCLCTRL_GPIO_OE1 |
+ GRC_LCLCTRL_GPIO_OE2 | GRC_LCLCTRL_GPIO_OUTPUT0 |
+ GRC_LCLCTRL_GPIO_OUTPUT1 | GRC_LCLCTRL_GPIO_OUTPUT2;
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5752)
gpio_mask |= GRC_LCLCTRL_GPIO_OE3 |
@@ -6418,8 +6419,9 @@ static int tg3_reset_hw(struct tg3 *tp, int reset_phy)
tp->grc_local_ctrl |= tr32(GRC_LOCAL_CTRL) & gpio_mask;
/* GPIO1 must be driven high for eeprom write protect */
- tp->grc_local_ctrl |= (GRC_LCLCTRL_GPIO_OE1 |
- GRC_LCLCTRL_GPIO_OUTPUT1);
+ if (tp->tg3_flags & TG3_FLAG_EEPROM_WRITE_PROT)
+ tp->grc_local_ctrl |= (GRC_LCLCTRL_GPIO_OE1 |
+ GRC_LCLCTRL_GPIO_OUTPUT1);
}
tw32_f(GRC_LOCAL_CTRL, tp->grc_local_ctrl);
udelay(100);
@@ -9963,8 +9965,10 @@ static void __devinit tg3_get_eeprom_hw_cfg(struct tg3 *tp)
tp->tg3_flags |= TG3_FLAG_EEPROM_WRITE_PROT;
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906) {
- if (!(tr32(PCIE_TRANSACTION_CFG) & PCIE_TRANS_CFG_LOM))
+ if (!(tr32(PCIE_TRANSACTION_CFG) & PCIE_TRANS_CFG_LOM)) {
tp->tg3_flags &= ~TG3_FLAG_EEPROM_WRITE_PROT;
+ tp->tg3_flags2 |= TG3_FLG2_IS_NIC;
+ }
return;
}
@@ -10064,10 +10068,17 @@ static void __devinit tg3_get_eeprom_hw_cfg(struct tg3 *tp)
tp->pdev->subsystem_vendor == PCI_VENDOR_ID_DELL)
tp->led_ctrl = LED_CTRL_MODE_PHY_2;
- if (nic_cfg & NIC_SRAM_DATA_CFG_EEPROM_WP)
+ if (nic_cfg & NIC_SRAM_DATA_CFG_EEPROM_WP) {
tp->tg3_flags |= TG3_FLAG_EEPROM_WRITE_PROT;
- else
+ if ((tp->pdev->subsystem_vendor ==
+ PCI_VENDOR_ID_ARIMA) &&
+ (tp->pdev->subsystem_device == 0x205a ||
+ tp->pdev->subsystem_device == 0x2063))
+ tp->tg3_flags &= ~TG3_FLAG_EEPROM_WRITE_PROT;
+ } else {
tp->tg3_flags &= ~TG3_FLAG_EEPROM_WRITE_PROT;
+ tp->tg3_flags2 |= TG3_FLG2_IS_NIC;
+ }
if (nic_cfg & NIC_SRAM_DATA_CFG_ASF_ENABLE) {
tp->tg3_flags |= TG3_FLAG_ENABLE_ASF;
@@ -10693,7 +10704,7 @@ static int __devinit tg3_get_invariants(struct tg3 *tp)
tp->tg3_flags |= TG3_FLAG_SRAM_USE_CONFIG;
/* Get eeprom hw config before calling tg3_set_power_state().
- * In particular, the TG3_FLAG_EEPROM_WRITE_PROT flag must be
+ * In particular, the TG3_FLG2_IS_NIC flag must be
* determined before calling tg3_set_power_state() so that
* we know whether or not to switch out of Vaux power.
* When the flag is set, it means that GPIO1 is used for eeprom