smsc: Move the SMC (SMSC) drivers

Moves the SMC (SMSC) drivers into drivers/net/ethernet/smsc/ and the
necessary Kconfig and Makefile changes.  Also did some cleanup
of NET_VENDOR_SMC Kconfig tag for the 8390 based drivers.

CC: Nicolas Pitre <nico@fluxnic.net>
CC: Donald Becker <becker@scyld.com>
CC: Erik Stahlman <erik@vt.edu>
CC: Dustin McIntire <dustin@sensoria.com>
CC: Steve Glendinning <steve.glendinning@smsc.com>
CC: David Hinds <dahinds@users.sourceforge.net>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

1 files changed, 0 insertions, 924 deletions

diff --git a/drivers/net/smc911x.h b/drivers/net/smc911x.h
deleted file mode 100644
index 3269292efec..00000000000
--- a/drivers/net/smc911x.h
+++ /dev/null
@@ -1,924 +0,0 @@
-/*------------------------------------------------------------------------
- . smc911x.h - macros for SMSC's LAN911{5,6,7,8} single-chip Ethernet device.
- .
- . Copyright (C) 2005 Sensoria Corp.
- . Derived from the unified SMC91x driver by Nicolas Pitre
- .
- . This program is free software; you can redistribute it and/or modify
- . it under the terms of the GNU General Public License as published by
- . the Free Software Foundation; either version 2 of the License, or
- . (at your option) any later version.
- .
- . This program is distributed in the hope that it will be useful,
- . but WITHOUT ANY WARRANTY; without even the implied warranty of
- . MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- . GNU General Public License for more details.
- .
- . You should have received a copy of the GNU General Public License
- . along with this program; if not, write to the Free Software
- . Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- .
- . Information contained in this file was obtained from the LAN9118
- . manual from SMC.  To get a copy, if you really want one, you can find
- . information under www.smsc.com.
- .
- . Authors
- .	 Dustin McIntire		 <dustin@sensoria.com>
- .
- ---------------------------------------------------------------------------*/
-#ifndef _SMC911X_H_
-#define _SMC911X_H_
-
-#include <linux/smc911x.h>
-/*
- * Use the DMA feature on PXA chips
- */
-#ifdef CONFIG_ARCH_PXA
-  #define SMC_USE_PXA_DMA	1
-  #define SMC_USE_16BIT		0
-  #define SMC_USE_32BIT		1
-  #define SMC_IRQ_SENSE		IRQF_TRIGGER_FALLING
-#elif defined(CONFIG_SH_MAGIC_PANEL_R2)
-  #define SMC_USE_16BIT		0
-  #define SMC_USE_32BIT		1
-  #define SMC_IRQ_SENSE		IRQF_TRIGGER_LOW
-#elif defined(CONFIG_ARCH_OMAP3)
-  #define SMC_USE_16BIT		0
-  #define SMC_USE_32BIT		1
-  #define SMC_IRQ_SENSE		IRQF_TRIGGER_LOW
-  #define SMC_MEM_RESERVED	1
-#elif defined(CONFIG_ARCH_OMAP2)
-  #define SMC_USE_16BIT		0
-  #define SMC_USE_32BIT		1
-  #define SMC_IRQ_SENSE		IRQF_TRIGGER_LOW
-  #define SMC_MEM_RESERVED	1
-#else
-/*
- * Default configuration
- */
-
-#define SMC_DYNAMIC_BUS_CONFIG
-#endif
-
-#ifdef SMC_USE_PXA_DMA
-#define SMC_USE_DMA
-#endif
-
-/* store this information for the driver.. */
-struct smc911x_local {
-	/*
-	 * If I have to wait until the DMA is finished and ready to reload a
-	 * packet, I will store the skbuff here. Then, the DMA will send it
-	 * out and free it.
-	 */
-	struct sk_buff *pending_tx_skb;
-
-	/* version/revision of the SMC911x chip */
-	u16 version;
-	u16 revision;
-
-	/* FIFO sizes */
-	int tx_fifo_kb;
-	int tx_fifo_size;
-	int rx_fifo_size;
-	int afc_cfg;
-
-	/* Contains the current active receive/phy mode */
-	int ctl_rfduplx;
-	int ctl_rspeed;
-
-	u32 msg_enable;
-	u32 phy_type;
-	struct mii_if_info mii;
-
-	/* work queue */
-	struct work_struct phy_configure;
-
-	int tx_throttle;
-	spinlock_t lock;
-
-	struct net_device *netdev;
-
-#ifdef SMC_USE_DMA
-	/* DMA needs the physical address of the chip */
-	u_long physaddr;
-	int rxdma;
-	int txdma;
-	int rxdma_active;
-	int txdma_active;
-	struct sk_buff *current_rx_skb;
-	struct sk_buff *current_tx_skb;
-	struct device *dev;
-#endif
-	void __iomem *base;
-#ifdef SMC_DYNAMIC_BUS_CONFIG
-	struct smc911x_platdata cfg;
-#endif
-};
-
-/*
- * Define the bus width specific IO macros
- */
-
-#ifdef SMC_DYNAMIC_BUS_CONFIG
-static inline unsigned int SMC_inl(struct smc911x_local *lp, int reg)
-{
-	void __iomem *ioaddr = lp->base + reg;
-
-	if (lp->cfg.flags & SMC911X_USE_32BIT)
-		return readl(ioaddr);
-
-	if (lp->cfg.flags & SMC911X_USE_16BIT)
-		return readw(ioaddr) | (readw(ioaddr + 2) << 16);
-
-	BUG();
-}
-
-static inline void SMC_outl(unsigned int value, struct smc911x_local *lp,
-			    int reg)
-{
-	void __iomem *ioaddr = lp->base + reg;
-
-	if (lp->cfg.flags & SMC911X_USE_32BIT) {
-		writel(value, ioaddr);
-		return;
-	}
-
-	if (lp->cfg.flags & SMC911X_USE_16BIT) {
-		writew(value & 0xffff, ioaddr);
-		writew(value >> 16, ioaddr + 2);
-		return;
-	}
-
-	BUG();
-}
-
-static inline void SMC_insl(struct smc911x_local *lp, int reg,
-			      void *addr, unsigned int count)
-{
-	void __iomem *ioaddr = lp->base + reg;
-
-	if (lp->cfg.flags & SMC911X_USE_32BIT) {
-		readsl(ioaddr, addr, count);
-		return;
-	}
-
-	if (lp->cfg.flags & SMC911X_USE_16BIT) {
-		readsw(ioaddr, addr, count * 2);
-		return;
-	}
-
-	BUG();
-}
-
-static inline void SMC_outsl(struct smc911x_local *lp, int reg,
-			     void *addr, unsigned int count)
-{
-	void __iomem *ioaddr = lp->base + reg;
-
-	if (lp->cfg.flags & SMC911X_USE_32BIT) {
-		writesl(ioaddr, addr, count);
-		return;
-	}
-
-	if (lp->cfg.flags & SMC911X_USE_16BIT) {
-		writesw(ioaddr, addr, count * 2);
-		return;
-	}
-
-	BUG();
-}
-#else
-#if	SMC_USE_16BIT
-#define SMC_inl(lp, r)		 ((readw((lp)->base + (r)) & 0xFFFF) + (readw((lp)->base + (r) + 2) << 16))
-#define SMC_outl(v, lp, r) 			 \
-	do{					 \
-		 writew(v & 0xFFFF, (lp)->base + (r));	 \
-		 writew(v >> 16, (lp)->base + (r) + 2); \
-	 } while (0)
-#define SMC_insl(lp, r, p, l)	 readsw((short*)((lp)->base + (r)), p, l*2)
-#define SMC_outsl(lp, r, p, l)	 writesw((short*)((lp)->base + (r)), p, l*2)
-
-#elif	SMC_USE_32BIT
-#define SMC_inl(lp, r)		 readl((lp)->base + (r))
-#define SMC_outl(v, lp, r)	 writel(v, (lp)->base + (r))
-#define SMC_insl(lp, r, p, l)	 readsl((int*)((lp)->base + (r)), p, l)
-#define SMC_outsl(lp, r, p, l)	 writesl((int*)((lp)->base + (r)), p, l)
-
-#endif /* SMC_USE_16BIT */
-#endif /* SMC_DYNAMIC_BUS_CONFIG */
-
-
-#ifdef SMC_USE_PXA_DMA
-
-#include <mach/dma.h>
-
-/*
- * Define the request and free functions
- * These are unfortunately architecture specific as no generic allocation
- * mechanism exits
- */
-#define SMC_DMA_REQUEST(dev, handler) \
-	 pxa_request_dma(dev->name, DMA_PRIO_LOW, handler, dev)
-
-#define SMC_DMA_FREE(dev, dma) \
-	 pxa_free_dma(dma)
-
-#define SMC_DMA_ACK_IRQ(dev, dma)					\
-{									\
-	if (DCSR(dma) & DCSR_BUSERR) {					\
-		printk("%s: DMA %d bus error!\n", dev->name, dma);	\
-	}								\
-	DCSR(dma) = DCSR_STARTINTR|DCSR_ENDINTR|DCSR_BUSERR;		\
-}
-
-/*
- * Use a DMA for RX and TX packets.
- */
-#include <linux/dma-mapping.h>
-
-static dma_addr_t rx_dmabuf, tx_dmabuf;
-static int rx_dmalen, tx_dmalen;
-
-#ifdef SMC_insl
-#undef SMC_insl
-#define SMC_insl(lp, r, p, l) \
-	smc_pxa_dma_insl(lp, lp->physaddr, r, lp->rxdma, p, l)
-
-static inline void
-smc_pxa_dma_insl(struct smc911x_local *lp, u_long physaddr,
-		int reg, int dma, u_char *buf, int len)
-{
-	/* 64 bit alignment is required for memory to memory DMA */
-	if ((long)buf & 4) {
-		*((u32 *)buf) = SMC_inl(lp, reg);
-		buf += 4;
-		len--;
-	}
-
-	len *= 4;
-	rx_dmabuf = dma_map_single(lp->dev, buf, len, DMA_FROM_DEVICE);
-	rx_dmalen = len;
-	DCSR(dma) = DCSR_NODESC;
-	DTADR(dma) = rx_dmabuf;
-	DSADR(dma) = physaddr + reg;
-	DCMD(dma) = (DCMD_INCTRGADDR | DCMD_BURST32 |
-		DCMD_WIDTH4 | DCMD_ENDIRQEN | (DCMD_LENGTH & rx_dmalen));
-	DCSR(dma) = DCSR_NODESC | DCSR_RUN;
-}
-#endif
-
-#ifdef SMC_outsl
-#undef SMC_outsl
-#define SMC_outsl(lp, r, p, l) \
-	 smc_pxa_dma_outsl(lp, lp->physaddr, r, lp->txdma, p, l)
-
-static inline void
-smc_pxa_dma_outsl(struct smc911x_local *lp, u_long physaddr,
-		int reg, int dma, u_char *buf, int len)
-{
-	/* 64 bit alignment is required for memory to memory DMA */
-	if ((long)buf & 4) {
-		SMC_outl(*((u32 *)buf), lp, reg);
-		buf += 4;
-		len--;
-	}
-
-	len *= 4;
-	tx_dmabuf = dma_map_single(lp->dev, buf, len, DMA_TO_DEVICE);
-	tx_dmalen = len;
-	DCSR(dma) = DCSR_NODESC;
-	DSADR(dma) = tx_dmabuf;
-	DTADR(dma) = physaddr + reg;
-	DCMD(dma) = (DCMD_INCSRCADDR | DCMD_BURST32 |
-		DCMD_WIDTH4 | DCMD_ENDIRQEN | (DCMD_LENGTH & tx_dmalen));
-	DCSR(dma) = DCSR_NODESC | DCSR_RUN;
-}
-#endif
-#endif	 /* SMC_USE_PXA_DMA */
-
-
-/* Chip Parameters and Register Definitions */
-
-#define SMC911X_TX_FIFO_LOW_THRESHOLD	(1536*2)
-
-#define SMC911X_IO_EXTENT	 0x100
-
-#define SMC911X_EEPROM_LEN	 7
-
-/* Below are the register offsets and bit definitions
- * of the Lan911x memory space
- */
-#define RX_DATA_FIFO		 (0x00)
-
-#define TX_DATA_FIFO		 (0x20)
-#define	TX_CMD_A_INT_ON_COMP_		(0x80000000)
-#define	TX_CMD_A_INT_BUF_END_ALGN_	(0x03000000)
-#define	TX_CMD_A_INT_4_BYTE_ALGN_	(0x00000000)
-#define	TX_CMD_A_INT_16_BYTE_ALGN_	(0x01000000)
-#define	TX_CMD_A_INT_32_BYTE_ALGN_	(0x02000000)
-#define	TX_CMD_A_INT_DATA_OFFSET_	(0x001F0000)
-#define	TX_CMD_A_INT_FIRST_SEG_		(0x00002000)
-#define	TX_CMD_A_INT_LAST_SEG_		(0x00001000)
-#define	TX_CMD_A_BUF_SIZE_		(0x000007FF)
-#define	TX_CMD_B_PKT_TAG_		(0xFFFF0000)
-#define	TX_CMD_B_ADD_CRC_DISABLE_	(0x00002000)
-#define	TX_CMD_B_DISABLE_PADDING_	(0x00001000)
-#define	TX_CMD_B_PKT_BYTE_LENGTH_	(0x000007FF)
-
-#define RX_STATUS_FIFO		(0x40)
-#define	RX_STS_PKT_LEN_			(0x3FFF0000)
-#define	RX_STS_ES_			(0x00008000)
-#define	RX_STS_BCST_			(0x00002000)
-#define	RX_STS_LEN_ERR_			(0x00001000)
-#define	RX_STS_RUNT_ERR_		(0x00000800)
-#define	RX_STS_MCAST_			(0x00000400)
-#define	RX_STS_TOO_LONG_		(0x00000080)
-#define	RX_STS_COLL_			(0x00000040)
-#define	RX_STS_ETH_TYPE_		(0x00000020)
-#define	RX_STS_WDOG_TMT_		(0x00000010)
-#define	RX_STS_MII_ERR_			(0x00000008)
-#define	RX_STS_DRIBBLING_		(0x00000004)
-#define	RX_STS_CRC_ERR_			(0x00000002)
-#define RX_STATUS_FIFO_PEEK 	(0x44)
-#define TX_STATUS_FIFO		(0x48)
-#define	TX_STS_TAG_			(0xFFFF0000)
-#define	TX_STS_ES_			(0x00008000)
-#define	TX_STS_LOC_			(0x00000800)
-#define	TX_STS_NO_CARR_			(0x00000400)
-#define	TX_STS_LATE_COLL_		(0x00000200)
-#define	TX_STS_MANY_COLL_		(0x00000100)
-#define	TX_STS_COLL_CNT_		(0x00000078)
-#define	TX_STS_MANY_DEFER_		(0x00000004)
-#define	TX_STS_UNDERRUN_		(0x00000002)
-#define	TX_STS_DEFERRED_		(0x00000001)
-#define TX_STATUS_FIFO_PEEK	(0x4C)
-#define ID_REV			(0x50)
-#define	ID_REV_CHIP_ID_			(0xFFFF0000)  /* RO */
-#define	ID_REV_REV_ID_			(0x0000FFFF)  /* RO */
-
-#define INT_CFG			(0x54)
-#define	INT_CFG_INT_DEAS_		(0xFF000000)  /* R/W */
-#define	INT_CFG_INT_DEAS_CLR_		(0x00004000)
-#define	INT_CFG_INT_DEAS_STS_		(0x00002000)
-#define	INT_CFG_IRQ_INT_		(0x00001000)  /* RO */
-#define	INT_CFG_IRQ_EN_			(0x00000100)  /* R/W */
-#define	INT_CFG_IRQ_POL_		(0x00000010)  /* R/W Not Affected by SW Reset */
-#define	INT_CFG_IRQ_TYPE_		(0x00000001)  /* R/W Not Affected by SW Reset */
-
-#define INT_STS			(0x58)
-#define	INT_STS_SW_INT_			(0x80000000)  /* R/WC */
-#define	INT_STS_TXSTOP_INT_		(0x02000000)  /* R/WC */
-#define	INT_STS_RXSTOP_INT_		(0x01000000)  /* R/WC */
-#define	INT_STS_RXDFH_INT_		(0x00800000)  /* R/WC */
-#define	INT_STS_RXDF_INT_		(0x00400000)  /* R/WC */
-#define	INT_STS_TX_IOC_			(0x00200000)  /* R/WC */
-#define	INT_STS_RXD_INT_		(0x00100000)  /* R/WC */
-#define	INT_STS_GPT_INT_		(0x00080000)  /* R/WC */
-#define	INT_STS_PHY_INT_		(0x00040000)  /* RO */
-#define	INT_STS_PME_INT_		(0x00020000)  /* R/WC */
-#define	INT_STS_TXSO_			(0x00010000)  /* R/WC */
-#define	INT_STS_RWT_			(0x00008000)  /* R/WC */
-#define	INT_STS_RXE_			(0x00004000)  /* R/WC */
-#define	INT_STS_TXE_			(0x00002000)  /* R/WC */
-//#define	INT_STS_ERX_		(0x00001000)  /* R/WC */
-#define	INT_STS_TDFU_			(0x00000800)  /* R/WC */
-#define	INT_STS_TDFO_			(0x00000400)  /* R/WC */
-#define	INT_STS_TDFA_			(0x00000200)  /* R/WC */
-#define	INT_STS_TSFF_			(0x00000100)  /* R/WC */
-#define	INT_STS_TSFL_			(0x00000080)  /* R/WC */
-//#define	INT_STS_RXDF_		(0x00000040)  /* R/WC */
-#define	INT_STS_RDFO_			(0x00000040)  /* R/WC */
-#define	INT_STS_RDFL_			(0x00000020)  /* R/WC */
-#define	INT_STS_RSFF_			(0x00000010)  /* R/WC */
-#define	INT_STS_RSFL_			(0x00000008)  /* R/WC */
-#define	INT_STS_GPIO2_INT_		(0x00000004)  /* R/WC */
-#define	INT_STS_GPIO1_INT_		(0x00000002)  /* R/WC */
-#define	INT_STS_GPIO0_INT_		(0x00000001)  /* R/WC */
-
-#define INT_EN			(0x5C)
-#define	INT_EN_SW_INT_EN_		(0x80000000)  /* R/W */
-#define	INT_EN_TXSTOP_INT_EN_		(0x02000000)  /* R/W */
-#define	INT_EN_RXSTOP_INT_EN_		(0x01000000)  /* R/W */
-#define	INT_EN_RXDFH_INT_EN_		(0x00800000)  /* R/W */
-//#define	INT_EN_RXDF_INT_EN_		(0x00400000)  /* R/W */
-#define	INT_EN_TIOC_INT_EN_		(0x00200000)  /* R/W */
-#define	INT_EN_RXD_INT_EN_		(0x00100000)  /* R/W */
-#define	INT_EN_GPT_INT_EN_		(0x00080000)  /* R/W */
-#define	INT_EN_PHY_INT_EN_		(0x00040000)  /* R/W */
-#define	INT_EN_PME_INT_EN_		(0x00020000)  /* R/W */
-#define	INT_EN_TXSO_EN_			(0x00010000)  /* R/W */
-#define	INT_EN_RWT_EN_			(0x00008000)  /* R/W */
-#define	INT_EN_RXE_EN_			(0x00004000)  /* R/W */
-#define	INT_EN_TXE_EN_			(0x00002000)  /* R/W */
-//#define	INT_EN_ERX_EN_			(0x00001000)  /* R/W */
-#define	INT_EN_TDFU_EN_			(0x00000800)  /* R/W */
-#define	INT_EN_TDFO_EN_			(0x00000400)  /* R/W */
-#define	INT_EN_TDFA_EN_			(0x00000200)  /* R/W */
-#define	INT_EN_TSFF_EN_			(0x00000100)  /* R/W */
-#define	INT_EN_TSFL_EN_			(0x00000080)  /* R/W */
-//#define	INT_EN_RXDF_EN_			(0x00000040)  /* R/W */
-#define	INT_EN_RDFO_EN_			(0x00000040)  /* R/W */
-#define	INT_EN_RDFL_EN_			(0x00000020)  /* R/W */
-#define	INT_EN_RSFF_EN_			(0x00000010)  /* R/W */
-#define	INT_EN_RSFL_EN_			(0x00000008)  /* R/W */
-#define	INT_EN_GPIO2_INT_		(0x00000004)  /* R/W */
-#define	INT_EN_GPIO1_INT_		(0x00000002)  /* R/W */
-#define	INT_EN_GPIO0_INT_		(0x00000001)  /* R/W */
-
-#define BYTE_TEST		(0x64)
-#define FIFO_INT		(0x68)
-#define	FIFO_INT_TX_AVAIL_LEVEL_	(0xFF000000)  /* R/W */
-#define	FIFO_INT_TX_STS_LEVEL_		(0x00FF0000)  /* R/W */
-#define	FIFO_INT_RX_AVAIL_LEVEL_	(0x0000FF00)  /* R/W */
-#define	FIFO_INT_RX_STS_LEVEL_		(0x000000FF)  /* R/W */
-
-#define RX_CFG			(0x6C)
-#define	RX_CFG_RX_END_ALGN_		(0xC0000000)  /* R/W */
-#define		RX_CFG_RX_END_ALGN4_		(0x00000000)  /* R/W */
-#define		RX_CFG_RX_END_ALGN16_		(0x40000000)  /* R/W */
-#define		RX_CFG_RX_END_ALGN32_		(0x80000000)  /* R/W */
-#define	RX_CFG_RX_DMA_CNT_		(0x0FFF0000)  /* R/W */
-#define	RX_CFG_RX_DUMP_			(0x00008000)  /* R/W */
-#define	RX_CFG_RXDOFF_			(0x00001F00)  /* R/W */
-//#define	RX_CFG_RXBAD_			(0x00000001)  /* R/W */
-
-#define TX_CFG			(0x70)
-//#define	TX_CFG_TX_DMA_LVL_		(0xE0000000)	 /* R/W */
-//#define	TX_CFG_TX_DMA_CNT_		(0x0FFF0000)	 /* R/W Self Clearing */
-#define	TX_CFG_TXS_DUMP_		(0x00008000)  /* Self Clearing */
-#define	TX_CFG_TXD_DUMP_		(0x00004000)  /* Self Clearing */
-#define	TX_CFG_TXSAO_			(0x00000004)  /* R/W */
-#define	TX_CFG_TX_ON_			(0x00000002)  /* R/W */
-#define	TX_CFG_STOP_TX_			(0x00000001)  /* Self Clearing */
-
-#define HW_CFG			(0x74)
-#define	HW_CFG_TTM_			(0x00200000)  /* R/W */
-#define	HW_CFG_SF_			(0x00100000)  /* R/W */
-#define	HW_CFG_TX_FIF_SZ_		(0x000F0000)  /* R/W */
-#define	HW_CFG_TR_			(0x00003000)  /* R/W */
-#define	HW_CFG_PHY_CLK_SEL_		(0x00000060)  /* R/W */
-#define		 HW_CFG_PHY_CLK_SEL_INT_PHY_ 	(0x00000000) /* R/W */
-#define		 HW_CFG_PHY_CLK_SEL_EXT_PHY_ 	(0x00000020) /* R/W */
-#define		 HW_CFG_PHY_CLK_SEL_CLK_DIS_ 	(0x00000040) /* R/W */
-#define	HW_CFG_SMI_SEL_			(0x00000010)  /* R/W */
-#define	HW_CFG_EXT_PHY_DET_		(0x00000008)  /* RO */
-#define	HW_CFG_EXT_PHY_EN_		(0x00000004)  /* R/W */
-#define	HW_CFG_32_16_BIT_MODE_		(0x00000004)  /* RO */
-#define	HW_CFG_SRST_TO_			(0x00000002)  /* RO */
-#define	HW_CFG_SRST_			(0x00000001)  /* Self Clearing */
-
-#define RX_DP_CTRL		(0x78)
-#define	RX_DP_CTRL_RX_FFWD_		(0x80000000)  /* R/W */
-#define	RX_DP_CTRL_FFWD_BUSY_		(0x80000000)  /* RO */
-
-#define RX_FIFO_INF		(0x7C)
-#define	 RX_FIFO_INF_RXSUSED_		(0x00FF0000)  /* RO */
-#define	 RX_FIFO_INF_RXDUSED_		(0x0000FFFF)  /* RO */
-
-#define TX_FIFO_INF		(0x80)
-#define	TX_FIFO_INF_TSUSED_		(0x00FF0000)  /* RO */
-#define	TX_FIFO_INF_TDFREE_		(0x0000FFFF)  /* RO */
-
-#define PMT_CTRL		(0x84)
-#define	PMT_CTRL_PM_MODE_		(0x00003000)  /* Self Clearing */
-#define	PMT_CTRL_PHY_RST_		(0x00000400)  /* Self Clearing */
-#define	PMT_CTRL_WOL_EN_		(0x00000200)  /* R/W */
-#define	PMT_CTRL_ED_EN_			(0x00000100)  /* R/W */
-#define	PMT_CTRL_PME_TYPE_		(0x00000040)  /* R/W Not Affected by SW Reset */
-#define	PMT_CTRL_WUPS_			(0x00000030)  /* R/WC */
-#define		PMT_CTRL_WUPS_NOWAKE_		(0x00000000)  /* R/WC */
-#define		PMT_CTRL_WUPS_ED_		(0x00000010)  /* R/WC */
-#define		PMT_CTRL_WUPS_WOL_		(0x00000020)  /* R/WC */
-#define		PMT_CTRL_WUPS_MULTI_		(0x00000030)  /* R/WC */
-#define	PMT_CTRL_PME_IND_		(0x00000008)  /* R/W */
-#define	PMT_CTRL_PME_POL_		(0x00000004)  /* R/W */
-#define	PMT_CTRL_PME_EN_		(0x00000002)  /* R/W Not Affected by SW Reset */
-#define	PMT_CTRL_READY_			(0x00000001)  /* RO */
-
-#define GPIO_CFG		(0x88)
-#define	GPIO_CFG_LED3_EN_		(0x40000000)  /* R/W */
-#define	GPIO_CFG_LED2_EN_		(0x20000000)  /* R/W */
-#define	GPIO_CFG_LED1_EN_		(0x10000000)  /* R/W */
-#define	GPIO_CFG_GPIO2_INT_POL_		(0x04000000)  /* R/W */
-#define	GPIO_CFG_GPIO1_INT_POL_		(0x02000000)  /* R/W */
-#define	GPIO_CFG_GPIO0_INT_POL_		(0x01000000)  /* R/W */
-#define	GPIO_CFG_EEPR_EN_		(0x00700000)  /* R/W */
-#define	GPIO_CFG_GPIOBUF2_		(0x00040000)  /* R/W */
-#define	GPIO_CFG_GPIOBUF1_		(0x00020000)  /* R/W */
-#define	GPIO_CFG_GPIOBUF0_		(0x00010000)  /* R/W */
-#define	GPIO_CFG_GPIODIR2_		(0x00000400)  /* R/W */
-#define	GPIO_CFG_GPIODIR1_		(0x00000200)  /* R/W */
-#define	GPIO_CFG_GPIODIR0_		(0x00000100)  /* R/W */
-#define	GPIO_CFG_GPIOD4_		(0x00000010)  /* R/W */
-#define	GPIO_CFG_GPIOD3_		(0x00000008)  /* R/W */
-#define	GPIO_CFG_GPIOD2_		(0x00000004)  /* R/W */
-#define	GPIO_CFG_GPIOD1_		(0x00000002)  /* R/W */
-#define	GPIO_CFG_GPIOD0_		(0x00000001)  /* R/W */
-
-#define GPT_CFG			(0x8C)
-#define	GPT_CFG_TIMER_EN_		(0x20000000)  /* R/W */
-#define	GPT_CFG_GPT_LOAD_		(0x0000FFFF)  /* R/W */
-
-#define GPT_CNT			(0x90)
-#define	GPT_CNT_GPT_CNT_		(0x0000FFFF)  /* RO */
-
-#define ENDIAN			(0x98)
-#define FREE_RUN		(0x9C)
-#define RX_DROP			(0xA0)
-#define MAC_CSR_CMD		(0xA4)
-#define	 MAC_CSR_CMD_CSR_BUSY_		(0x80000000)  /* Self Clearing */
-#define	 MAC_CSR_CMD_R_NOT_W_		(0x40000000)  /* R/W */
-#define	 MAC_CSR_CMD_CSR_ADDR_		(0x000000FF)  /* R/W */
-
-#define MAC_CSR_DATA		(0xA8)
-#define AFC_CFG			(0xAC)
-#define		AFC_CFG_AFC_HI_			(0x00FF0000)  /* R/W */
-#define		AFC_CFG_AFC_LO_			(0x0000FF00)  /* R/W */
-#define		AFC_CFG_BACK_DUR_		(0x000000F0)  /* R/W */
-#define		AFC_CFG_FCMULT_			(0x00000008)  /* R/W */
-#define		AFC_CFG_FCBRD_			(0x00000004)  /* R/W */
-#define		AFC_CFG_FCADD_			(0x00000002)  /* R/W */
-#define		AFC_CFG_FCANY_			(0x00000001)  /* R/W */
-
-#define E2P_CMD			(0xB0)
-#define	E2P_CMD_EPC_BUSY_		(0x80000000)  /* Self Clearing */
-#define	E2P_CMD_EPC_CMD_			(0x70000000)  /* R/W */
-#define		E2P_CMD_EPC_CMD_READ_		(0x00000000)  /* R/W */
-#define		E2P_CMD_EPC_CMD_EWDS_		(0x10000000)  /* R/W */
-#define		E2P_CMD_EPC_CMD_EWEN_		(0x20000000)  /* R/W */
-#define		E2P_CMD_EPC_CMD_WRITE_		(0x30000000)  /* R/W */
-#define		E2P_CMD_EPC_CMD_WRAL_		(0x40000000)  /* R/W */
-#define		E2P_CMD_EPC_CMD_ERASE_		(0x50000000)  /* R/W */
-#define		E2P_CMD_EPC_CMD_ERAL_		(0x60000000)  /* R/W */
-#define		E2P_CMD_EPC_CMD_RELOAD_		(0x70000000)  /* R/W */
-#define	E2P_CMD_EPC_TIMEOUT_		(0x00000200)  /* RO */
-#define	E2P_CMD_MAC_ADDR_LOADED_	(0x00000100)  /* RO */
-#define	E2P_CMD_EPC_ADDR_		(0x000000FF)  /* R/W */
-
-#define E2P_DATA		(0xB4)
-#define	E2P_DATA_EEPROM_DATA_		(0x000000FF)  /* R/W */
-/* end of LAN register offsets and bit definitions */
-
-/*
- ****************************************************************************
- ****************************************************************************
- * MAC Control and Status Register (Indirect Address)
- * Offset (through the MAC_CSR CMD and DATA port)
- ****************************************************************************
- ****************************************************************************
- *
- */
-#define MAC_CR			(0x01)  /* R/W */
-
-/* MAC_CR - MAC Control Register */
-#define MAC_CR_RXALL_			(0x80000000)
-// TODO: delete this bit? It is not described in the data sheet.
-#define MAC_CR_HBDIS_			(0x10000000)
-#define MAC_CR_RCVOWN_			(0x00800000)
-#define MAC_CR_LOOPBK_			(0x00200000)
-#define MAC_CR_FDPX_			(0x00100000)
-#define MAC_CR_MCPAS_			(0x00080000)
-#define MAC_CR_PRMS_			(0x00040000)
-#define MAC_CR_INVFILT_			(0x00020000)
-#define MAC_CR_PASSBAD_			(0x00010000)
-#define MAC_CR_HFILT_			(0x00008000)
-#define MAC_CR_HPFILT_			(0x00002000)
-#define MAC_CR_LCOLL_			(0x00001000)
-#define MAC_CR_BCAST_			(0x00000800)
-#define MAC_CR_DISRTY_			(0x00000400)
-#define MAC_CR_PADSTR_			(0x00000100)
-#define MAC_CR_BOLMT_MASK_		(0x000000C0)
-#define MAC_CR_DFCHK_			(0x00000020)
-#define MAC_CR_TXEN_			(0x00000008)
-#define MAC_CR_RXEN_			(0x00000004)
-
-#define ADDRH			(0x02)	  /* R/W mask 0x0000FFFFUL */
-#define ADDRL			(0x03)	  /* R/W mask 0xFFFFFFFFUL */
-#define HASHH			(0x04)	  /* R/W */
-#define HASHL			(0x05)	  /* R/W */
-
-#define MII_ACC			(0x06)	  /* R/W */
-#define MII_ACC_PHY_ADDR_		(0x0000F800)
-#define MII_ACC_MIIRINDA_		(0x000007C0)
-#define MII_ACC_MII_WRITE_		(0x00000002)
-#define MII_ACC_MII_BUSY_		(0x00000001)
-
-#define MII_DATA		(0x07)	  /* R/W mask 0x0000FFFFUL */
-
-#define FLOW			(0x08)	  /* R/W */
-#define FLOW_FCPT_			(0xFFFF0000)
-#define FLOW_FCPASS_			(0x00000004)
-#define FLOW_FCEN_			(0x00000002)
-#define FLOW_FCBSY_			(0x00000001)
-
-#define VLAN1			(0x09)	  /* R/W mask 0x0000FFFFUL */
-#define VLAN1_VTI1_			(0x0000ffff)
-
-#define VLAN2			(0x0A)	  /* R/W mask 0x0000FFFFUL */
-#define VLAN2_VTI2_			(0x0000ffff)
-
-#define WUFF			(0x0B)	  /* WO */
-
-#define WUCSR			(0x0C)	  /* R/W */
-#define WUCSR_GUE_			(0x00000200)
-#define WUCSR_WUFR_			(0x00000040)
-#define WUCSR_MPR_			(0x00000020)
-#define WUCSR_WAKE_EN_			(0x00000004)
-#define WUCSR_MPEN_			(0x00000002)
-
-/*
- ****************************************************************************
- * Chip Specific MII Defines
- ****************************************************************************
- *
- * Phy register offsets and bit definitions
- *
- */
-
-#define PHY_MODE_CTRL_STS	((u32)17)	/* Mode Control/Status Register */
-//#define MODE_CTRL_STS_FASTRIP_	  ((u16)0x4000)
-#define MODE_CTRL_STS_EDPWRDOWN_	 ((u16)0x2000)
-//#define MODE_CTRL_STS_LOWSQEN_	   ((u16)0x0800)
-//#define MODE_CTRL_STS_MDPREBP_	   ((u16)0x0400)
-//#define MODE_CTRL_STS_FARLOOPBACK_  ((u16)0x0200)
-//#define MODE_CTRL_STS_FASTEST_	   ((u16)0x0100)
-//#define MODE_CTRL_STS_REFCLKEN_	   ((u16)0x0010)
-//#define MODE_CTRL_STS_PHYADBP_	   ((u16)0x0008)
-//#define MODE_CTRL_STS_FORCE_G_LINK_ ((u16)0x0004)
-#define MODE_CTRL_STS_ENERGYON_	 	((u16)0x0002)
-
-#define PHY_INT_SRC			((u32)29)
-#define PHY_INT_SRC_ENERGY_ON_			((u16)0x0080)
-#define PHY_INT_SRC_ANEG_COMP_			((u16)0x0040)
-#define PHY_INT_SRC_REMOTE_FAULT_		((u16)0x0020)
-#define PHY_INT_SRC_LINK_DOWN_			((u16)0x0010)
-#define PHY_INT_SRC_ANEG_LP_ACK_		((u16)0x0008)
-#define PHY_INT_SRC_PAR_DET_FAULT_		((u16)0x0004)
-#define PHY_INT_SRC_ANEG_PGRX_			((u16)0x0002)
-
-#define PHY_INT_MASK			((u32)30)
-#define PHY_INT_MASK_ENERGY_ON_			((u16)0x0080)
-#define PHY_INT_MASK_ANEG_COMP_			((u16)0x0040)
-#define PHY_INT_MASK_REMOTE_FAULT_		((u16)0x0020)
-#define PHY_INT_MASK_LINK_DOWN_			((u16)0x0010)
-#define PHY_INT_MASK_ANEG_LP_ACK_		((u16)0x0008)
-#define PHY_INT_MASK_PAR_DET_FAULT_		((u16)0x0004)
-#define PHY_INT_MASK_ANEG_PGRX_			((u16)0x0002)
-
-#define PHY_SPECIAL			((u32)31)
-#define PHY_SPECIAL_ANEG_DONE_			((u16)0x1000)
-#define PHY_SPECIAL_RES_			((u16)0x0040)
-#define PHY_SPECIAL_RES_MASK_			((u16)0x0FE1)
-#define PHY_SPECIAL_SPD_			((u16)0x001C)
-#define PHY_SPECIAL_SPD_10HALF_			((u16)0x0004)
-#define PHY_SPECIAL_SPD_10FULL_			((u16)0x0014)
-#define PHY_SPECIAL_SPD_100HALF_		((u16)0x0008)
-#define PHY_SPECIAL_SPD_100FULL_		((u16)0x0018)
-
-#define LAN911X_INTERNAL_PHY_ID		(0x0007C000)
-
-/* Chip ID values */
-#define CHIP_9115	0x0115
-#define CHIP_9116	0x0116
-#define CHIP_9117	0x0117
-#define CHIP_9118	0x0118
-#define CHIP_9211	0x9211
-#define CHIP_9215	0x115A
-#define CHIP_9217	0x117A
-#define CHIP_9218	0x118A
-
-struct chip_id {
-	u16 id;
-	char *name;
-};
-
-static const struct chip_id chip_ids[] =  {
-	{ CHIP_9115, "LAN9115" },
-	{ CHIP_9116, "LAN9116" },
-	{ CHIP_9117, "LAN9117" },
-	{ CHIP_9118, "LAN9118" },
-	{ CHIP_9211, "LAN9211" },
-	{ CHIP_9215, "LAN9215" },
-	{ CHIP_9217, "LAN9217" },
-	{ CHIP_9218, "LAN9218" },
-	{ 0, NULL },
-};
-
-#define IS_REV_A(x)	((x & 0xFFFF)==0)
-
-/*
- * Macros to abstract register access according to the data bus
- * capabilities.  Please use those and not the in/out primitives.
- */
-/* FIFO read/write macros */
-#define SMC_PUSH_DATA(lp, p, l)	SMC_outsl( lp, TX_DATA_FIFO, p, (l) >> 2 )
-#define SMC_PULL_DATA(lp, p, l)	SMC_insl ( lp, RX_DATA_FIFO, p, (l) >> 2 )
-#define SMC_SET_TX_FIFO(lp, x) 	SMC_outl( x, lp, TX_DATA_FIFO )
-#define SMC_GET_RX_FIFO(lp)	SMC_inl( lp, RX_DATA_FIFO )
-
-
-/* I/O mapped register read/write macros */
-#define SMC_GET_TX_STS_FIFO(lp)		SMC_inl( lp, TX_STATUS_FIFO )
-#define SMC_GET_RX_STS_FIFO(lp)		SMC_inl( lp, RX_STATUS_FIFO )
-#define SMC_GET_RX_STS_FIFO_PEEK(lp)	SMC_inl( lp, RX_STATUS_FIFO_PEEK )
-#define SMC_GET_PN(lp)			(SMC_inl( lp, ID_REV ) >> 16)
-#define SMC_GET_REV(lp)			(SMC_inl( lp, ID_REV ) & 0xFFFF)
-#define SMC_GET_IRQ_CFG(lp)		SMC_inl( lp, INT_CFG )
-#define SMC_SET_IRQ_CFG(lp, x)		SMC_outl( x, lp, INT_CFG )
-#define SMC_GET_INT(lp)			SMC_inl( lp, INT_STS )
-#define SMC_ACK_INT(lp, x)			SMC_outl( x, lp, INT_STS )
-#define SMC_GET_INT_EN(lp)		SMC_inl( lp, INT_EN )
-#define SMC_SET_INT_EN(lp, x)		SMC_outl( x, lp, INT_EN )
-#define SMC_GET_BYTE_TEST(lp)		SMC_inl( lp, BYTE_TEST )
-#define SMC_SET_BYTE_TEST(lp, x)		SMC_outl( x, lp, BYTE_TEST )
-#define SMC_GET_FIFO_INT(lp)		SMC_inl( lp, FIFO_INT )
-#define SMC_SET_FIFO_INT(lp, x)		SMC_outl( x, lp, FIFO_INT )
-#define SMC_SET_FIFO_TDA(lp, x)					\
-	do {							\
-		unsigned long __flags;				\
-		int __mask;					\
-		local_irq_save(__flags);			\
-		__mask = SMC_GET_FIFO_INT((lp)) & ~(0xFF<<24);	\
-		SMC_SET_FIFO_INT( (lp), __mask | (x)<<24 );	\
-		local_irq_restore(__flags);			\
-	} while (0)
-#define SMC_SET_FIFO_TSL(lp, x)					\
-	do {							\
-		unsigned long __flags;				\
-		int __mask;					\
-		local_irq_save(__flags);			\
-		__mask = SMC_GET_FIFO_INT((lp)) & ~(0xFF<<16);	\
-		SMC_SET_FIFO_INT( (lp), __mask | (((x) & 0xFF)<<16));	\
-		local_irq_restore(__flags);			\
-	} while (0)
-#define SMC_SET_FIFO_RSA(lp, x)					\
-	do {							\
-		unsigned long __flags;				\
-		int __mask;					\
-		local_irq_save(__flags);			\
-		__mask = SMC_GET_FIFO_INT((lp)) & ~(0xFF<<8);	\
-		SMC_SET_FIFO_INT( (lp), __mask | (((x) & 0xFF)<<8));	\
-		local_irq_restore(__flags);			\
-	} while (0)
-#define SMC_SET_FIFO_RSL(lp, x)					\
-	do {							\
-		unsigned long __flags;				\
-		int __mask;					\
-		local_irq_save(__flags);			\
-		__mask = SMC_GET_FIFO_INT((lp)) & ~0xFF;	\
-		SMC_SET_FIFO_INT( (lp),__mask | ((x) & 0xFF));	\
-		local_irq_restore(__flags);			\
-	} while (0)
-#define SMC_GET_RX_CFG(lp)		SMC_inl( lp, RX_CFG )
-#define SMC_SET_RX_CFG(lp, x)		SMC_outl( x, lp, RX_CFG )
-#define SMC_GET_TX_CFG(lp)		SMC_inl( lp, TX_CFG )
-#define SMC_SET_TX_CFG(lp, x)		SMC_outl( x, lp, TX_CFG )
-#define SMC_GET_HW_CFG(lp)		SMC_inl( lp, HW_CFG )
-#define SMC_SET_HW_CFG(lp, x)		SMC_outl( x, lp, HW_CFG )
-#define SMC_GET_RX_DP_CTRL(lp)		SMC_inl( lp, RX_DP_CTRL )
-#define SMC_SET_RX_DP_CTRL(lp, x)		SMC_outl( x, lp, RX_DP_CTRL )
-#define SMC_GET_PMT_CTRL(lp)		SMC_inl( lp, PMT_CTRL )
-#define SMC_SET_PMT_CTRL(lp, x)		SMC_outl( x, lp, PMT_CTRL )
-#define SMC_GET_GPIO_CFG(lp)		SMC_inl( lp, GPIO_CFG )
-#define SMC_SET_GPIO_CFG(lp, x)		SMC_outl( x, lp, GPIO_CFG )
-#define SMC_GET_RX_FIFO_INF(lp)		SMC_inl( lp, RX_FIFO_INF )
-#define SMC_SET_RX_FIFO_INF(lp, x)		SMC_outl( x, lp, RX_FIFO_INF )
-#define SMC_GET_TX_FIFO_INF(lp)		SMC_inl( lp, TX_FIFO_INF )
-#define SMC_SET_TX_FIFO_INF(lp, x)		SMC_outl( x, lp, TX_FIFO_INF )
-#define SMC_GET_GPT_CFG(lp)		SMC_inl( lp, GPT_CFG )
-#define SMC_SET_GPT_CFG(lp, x)		SMC_outl( x, lp, GPT_CFG )
-#define SMC_GET_RX_DROP(lp)		SMC_inl( lp, RX_DROP )
-#define SMC_SET_RX_DROP(lp, x)		SMC_outl( x, lp, RX_DROP )
-#define SMC_GET_MAC_CMD(lp)		SMC_inl( lp, MAC_CSR_CMD )
-#define SMC_SET_MAC_CMD(lp, x)		SMC_outl( x, lp, MAC_CSR_CMD )
-#define SMC_GET_MAC_DATA(lp)		SMC_inl( lp, MAC_CSR_DATA )
-#define SMC_SET_MAC_DATA(lp, x)		SMC_outl( x, lp, MAC_CSR_DATA )
-#define SMC_GET_AFC_CFG(lp)		SMC_inl( lp, AFC_CFG )
-#define SMC_SET_AFC_CFG(lp, x)		SMC_outl( x, lp, AFC_CFG )
-#define SMC_GET_E2P_CMD(lp)		SMC_inl( lp, E2P_CMD )
-#define SMC_SET_E2P_CMD(lp, x)		SMC_outl( x, lp, E2P_CMD )
-#define SMC_GET_E2P_DATA(lp)		SMC_inl( lp, E2P_DATA )
-#define SMC_SET_E2P_DATA(lp, x)		SMC_outl( x, lp, E2P_DATA )
-
-/* MAC register read/write macros */
-#define SMC_GET_MAC_CSR(lp,a,v)						\
-	do {								\
-		while (SMC_GET_MAC_CMD((lp)) & MAC_CSR_CMD_CSR_BUSY_);	\
-		SMC_SET_MAC_CMD((lp),MAC_CSR_CMD_CSR_BUSY_ |		\
-			MAC_CSR_CMD_R_NOT_W_ | (a) );			\
-		while (SMC_GET_MAC_CMD((lp)) & MAC_CSR_CMD_CSR_BUSY_);	\
-		v = SMC_GET_MAC_DATA((lp));			       	\
-	} while (0)
-#define SMC_SET_MAC_CSR(lp,a,v)						\
-	do {								\
-		while (SMC_GET_MAC_CMD((lp)) & MAC_CSR_CMD_CSR_BUSY_);	\
-		SMC_SET_MAC_DATA((lp), v);				\
-		SMC_SET_MAC_CMD((lp), MAC_CSR_CMD_CSR_BUSY_ | (a) );	\
-		while (SMC_GET_MAC_CMD((lp)) & MAC_CSR_CMD_CSR_BUSY_);	\
-	} while (0)
-#define SMC_GET_MAC_CR(lp, x)	SMC_GET_MAC_CSR( (lp), MAC_CR, x )
-#define SMC_SET_MAC_CR(lp, x)	SMC_SET_MAC_CSR( (lp), MAC_CR, x )
-#define SMC_GET_ADDRH(lp, x)	SMC_GET_MAC_CSR( (lp), ADDRH, x )
-#define SMC_SET_ADDRH(lp, x)	SMC_SET_MAC_CSR( (lp), ADDRH, x )
-#define SMC_GET_ADDRL(lp, x)	SMC_GET_MAC_CSR( (lp), ADDRL, x )
-#define SMC_SET_ADDRL(lp, x)	SMC_SET_MAC_CSR( (lp), ADDRL, x )
-#define SMC_GET_HASHH(lp, x)	SMC_GET_MAC_CSR( (lp), HASHH, x )
-#define SMC_SET_HASHH(lp, x)	SMC_SET_MAC_CSR( (lp), HASHH, x )
-#define SMC_GET_HASHL(lp, x)	SMC_GET_MAC_CSR( (lp), HASHL, x )
-#define SMC_SET_HASHL(lp, x)	SMC_SET_MAC_CSR( (lp), HASHL, x )
-#define SMC_GET_MII_ACC(lp, x)	SMC_GET_MAC_CSR( (lp), MII_ACC, x )
-#define SMC_SET_MII_ACC(lp, x)	SMC_SET_MAC_CSR( (lp), MII_ACC, x )
-#define SMC_GET_MII_DATA(lp, x)	SMC_GET_MAC_CSR( (lp), MII_DATA, x )
-#define SMC_SET_MII_DATA(lp, x)	SMC_SET_MAC_CSR( (lp), MII_DATA, x )
-#define SMC_GET_FLOW(lp, x)		SMC_GET_MAC_CSR( (lp), FLOW, x )
-#define SMC_SET_FLOW(lp, x)		SMC_SET_MAC_CSR( (lp), FLOW, x )
-#define SMC_GET_VLAN1(lp, x)	SMC_GET_MAC_CSR( (lp), VLAN1, x )
-#define SMC_SET_VLAN1(lp, x)	SMC_SET_MAC_CSR( (lp), VLAN1, x )
-#define SMC_GET_VLAN2(lp, x)	SMC_GET_MAC_CSR( (lp), VLAN2, x )
-#define SMC_SET_VLAN2(lp, x)	SMC_SET_MAC_CSR( (lp), VLAN2, x )
-#define SMC_SET_WUFF(lp, x)		SMC_SET_MAC_CSR( (lp), WUFF, x )
-#define SMC_GET_WUCSR(lp, x)	SMC_GET_MAC_CSR( (lp), WUCSR, x )
-#define SMC_SET_WUCSR(lp, x)	SMC_SET_MAC_CSR( (lp), WUCSR, x )
-
-/* PHY register read/write macros */
-#define SMC_GET_MII(lp,a,phy,v)					\
-	do {							\
-		u32 __v;					\
-		do {						\
-			SMC_GET_MII_ACC((lp), __v);			\
-		} while ( __v & MII_ACC_MII_BUSY_ );		\
-		SMC_SET_MII_ACC( (lp), ((phy)<<11) | ((a)<<6) |	\
-			MII_ACC_MII_BUSY_);			\
-		do {						\
-			SMC_GET_MII_ACC( (lp), __v);			\
-		} while ( __v & MII_ACC_MII_BUSY_ );		\
-		SMC_GET_MII_DATA((lp), v);				\
-	} while (0)
-#define SMC_SET_MII(lp,a,phy,v)					\
-	do {							\
-		u32 __v;					\
-		do {						\
-			SMC_GET_MII_ACC((lp), __v);			\
-		} while ( __v & MII_ACC_MII_BUSY_ );		\
-		SMC_SET_MII_DATA((lp), v);				\
-		SMC_SET_MII_ACC( (lp), ((phy)<<11) | ((a)<<6) |	\
-			MII_ACC_MII_BUSY_	 |		\
-			MII_ACC_MII_WRITE_  );			\
-		do {						\
-			SMC_GET_MII_ACC((lp), __v);			\
-		} while ( __v & MII_ACC_MII_BUSY_ );		\
-	} while (0)
-#define SMC_GET_PHY_BMCR(lp,phy,x)		SMC_GET_MII( (lp), MII_BMCR, phy, x )
-#define SMC_SET_PHY_BMCR(lp,phy,x)		SMC_SET_MII( (lp), MII_BMCR, phy, x )
-#define SMC_GET_PHY_BMSR(lp,phy,x)		SMC_GET_MII( (lp), MII_BMSR, phy, x )
-#define SMC_GET_PHY_ID1(lp,phy,x)		SMC_GET_MII( (lp), MII_PHYSID1, phy, x )
-#define SMC_GET_PHY_ID2(lp,phy,x)		SMC_GET_MII( (lp), MII_PHYSID2, phy, x )
-#define SMC_GET_PHY_MII_ADV(lp,phy,x)	SMC_GET_MII( (lp), MII_ADVERTISE, phy, x )
-#define SMC_SET_PHY_MII_ADV(lp,phy,x)	SMC_SET_MII( (lp), MII_ADVERTISE, phy, x )
-#define SMC_GET_PHY_MII_LPA(lp,phy,x)	SMC_GET_MII( (lp), MII_LPA, phy, x )
-#define SMC_SET_PHY_MII_LPA(lp,phy,x)	SMC_SET_MII( (lp), MII_LPA, phy, x )
-#define SMC_GET_PHY_CTRL_STS(lp,phy,x)	SMC_GET_MII( (lp), PHY_MODE_CTRL_STS, phy, x )
-#define SMC_SET_PHY_CTRL_STS(lp,phy,x)	SMC_SET_MII( (lp), PHY_MODE_CTRL_STS, phy, x )
-#define SMC_GET_PHY_INT_SRC(lp,phy,x)	SMC_GET_MII( (lp), PHY_INT_SRC, phy, x )
-#define SMC_SET_PHY_INT_SRC(lp,phy,x)	SMC_SET_MII( (lp), PHY_INT_SRC, phy, x )
-#define SMC_GET_PHY_INT_MASK(lp,phy,x)	SMC_GET_MII( (lp), PHY_INT_MASK, phy, x )
-#define SMC_SET_PHY_INT_MASK(lp,phy,x)	SMC_SET_MII( (lp), PHY_INT_MASK, phy, x )
-#define SMC_GET_PHY_SPECIAL(lp,phy,x)	SMC_GET_MII( (lp), PHY_SPECIAL, phy, x )
-
-
-
-/* Misc read/write macros */
-
-#ifndef SMC_GET_MAC_ADDR
-#define SMC_GET_MAC_ADDR(lp, addr)				\
-	do {							\
-		unsigned int __v;				\
-								\
-		SMC_GET_MAC_CSR((lp), ADDRL, __v);			\
-		addr[0] = __v; addr[1] = __v >> 8;		\
-		addr[2] = __v >> 16; addr[3] = __v >> 24;	\
-		SMC_GET_MAC_CSR((lp), ADDRH, __v);			\
-		addr[4] = __v; addr[5] = __v >> 8;		\
-	} while (0)
-#endif
-
-#define SMC_SET_MAC_ADDR(lp, addr)				\
-	do {							\
-		 SMC_SET_MAC_CSR((lp), ADDRL,				\
-				 addr[0] |			\
-				(addr[1] << 8) |		\
-				(addr[2] << 16) |		\
-				(addr[3] << 24));		\
-		 SMC_SET_MAC_CSR((lp), ADDRH, addr[4]|(addr[5] << 8));\
-	} while (0)
-
-
-#define SMC_WRITE_EEPROM_CMD(lp, cmd, addr)				\
-	do {								\
-		while (SMC_GET_E2P_CMD((lp)) & MAC_CSR_CMD_CSR_BUSY_);	\
-		SMC_SET_MAC_CMD((lp), MAC_CSR_CMD_R_NOT_W_ | a );		\
-		while (SMC_GET_MAC_CMD((lp)) & MAC_CSR_CMD_CSR_BUSY_);	\
-	} while (0)
-
-#endif	 /* _SMC911X_H_ */