diff options
author | Jeff Garzik <jeff@garzik.org> | 2006-09-13 13:24:59 -0400 |
---|---|---|
committer | Jeff Garzik <jeff@garzik.org> | 2006-09-13 13:24:59 -0400 |
commit | 6aa20a2235535605db6d6d2bd850298b2fe7f31e (patch) | |
tree | df0b855043407b831d57f2f2c271f8aab48444f4 /drivers/net/ne2.c | |
parent | 7a291083225af6e22ffaa46b3d91cfc1a1ccaab4 (diff) | |
download | linux-3.10-6aa20a2235535605db6d6d2bd850298b2fe7f31e.tar.gz linux-3.10-6aa20a2235535605db6d6d2bd850298b2fe7f31e.tar.bz2 linux-3.10-6aa20a2235535605db6d6d2bd850298b2fe7f31e.zip |
drivers/net: Trim trailing whitespace
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Diffstat (limited to 'drivers/net/ne2.c')
-rw-r--r-- | drivers/net/ne2.c | 70 |
1 files changed, 35 insertions, 35 deletions
diff --git a/drivers/net/ne2.c b/drivers/net/ne2.c index eebf5f02b47..5fccfea66d8 100644 --- a/drivers/net/ne2.c +++ b/drivers/net/ne2.c @@ -28,7 +28,7 @@ - added support for Arco Electronics AE/2-card (experimental) Mon Sep 14 09:53:42 CET 1998 (David Weinehall) - - added support for Compex ENET-16MC/P (experimental) + - added support for Compex ENET-16MC/P (experimental) Tue Sep 15 16:21:12 CET 1998 (David Weinehall, Magnus Jonsson, Tomas Ogren) - Miscellaneous bugfixes @@ -44,11 +44,11 @@ - Version# bump Mon Nov 16 15:28:23 CET 1998 (Wim Dumon) - - pass 'dev' as last parameter of request_irq in stead of 'NULL' + - pass 'dev' as last parameter of request_irq in stead of 'NULL' Wed Feb 7 21:24:00 CET 2001 (Alfred Arnold) - added support for the D-Link DE-320CT - + * WARNING ------- This is alpha-test software. It is not guaranteed to work. As a @@ -150,9 +150,9 @@ static void ne_block_output(struct net_device *dev, const int count, /* - * special code to read the DE-320's MAC address EEPROM. In contrast to a + * special code to read the DE-320's MAC address EEPROM. In contrast to a * standard NE design, this is a serial EEPROM (93C46) that has to be read - * bit by bit. The EEPROM cotrol port at base + 0x1e has the following + * bit by bit. The EEPROM cotrol port at base + 0x1e has the following * layout: * * Bit 0 = Data out (read from EEPROM) @@ -218,7 +218,7 @@ static unsigned int __init dlink_get_eeprom(unsigned int eeaddr, unsigned int ad { int z; unsigned int value = 0; - + /* pull the CS line low for a moment. This resets the EEPROM- internal logic, and makes it ready for a new command. */ @@ -253,23 +253,23 @@ static int __init do_ne2_probe(struct net_device *dev) SET_MODULE_OWNER(dev); - /* Do not check any supplied i/o locations. + /* Do not check any supplied i/o locations. POS registers usually don't fail :) */ - /* MCA cards have POS registers. - Autodetecting MCA cards is extremely simple. + /* MCA cards have POS registers. + Autodetecting MCA cards is extremely simple. Just search for the card. */ for(i = 0; (ne2_adapters[i].name != NULL) && !adapter_found; i++) { - current_mca_slot = + current_mca_slot = mca_find_unused_adapter(ne2_adapters[i].id, 0); if((current_mca_slot != MCA_NOTFOUND) && !adapter_found) { int res; - mca_set_adapter_name(current_mca_slot, + mca_set_adapter_name(current_mca_slot, ne2_adapters[i].name); mca_mark_as_used(current_mca_slot); - + res = ne2_probe1(dev, current_mca_slot); if (res) mca_mark_as_unused(current_mca_slot); @@ -307,7 +307,7 @@ static int ne2_procinfo(char *buf, int slot, struct net_device *dev) len += sprintf(buf+len, "The NE/2 Ethernet Adapter\n" ); len += sprintf(buf+len, "Driver written by Wim Dumon "); - len += sprintf(buf+len, "<wimpie@kotnet.org>\n"); + len += sprintf(buf+len, "<wimpie@kotnet.org>\n"); len += sprintf(buf+len, "Modified by "); len += sprintf(buf+len, "David Weinehall <tao@acc.umu.se>\n"); len += sprintf(buf+len, "and by Magnus Jonsson <bigfoot@acc.umu.se>\n"); @@ -316,8 +316,8 @@ static int ne2_procinfo(char *buf, int slot, struct net_device *dev) len += sprintf(buf+len, "IRQ : %d\n", dev->irq); #define HW_ADDR(i) dev->dev_addr[i] - len += sprintf(buf+len, "HW addr : %x:%x:%x:%x:%x:%x\n", - HW_ADDR(0), HW_ADDR(1), HW_ADDR(2), + len += sprintf(buf+len, "HW addr : %x:%x:%x:%x:%x:%x\n", + HW_ADDR(0), HW_ADDR(1), HW_ADDR(2), HW_ADDR(3), HW_ADDR(4), HW_ADDR(5) ); #undef HW_ADDR @@ -370,7 +370,7 @@ static int __init ne2_probe1(struct net_device *dev, int slot) #ifndef CRYNWR_WAY /* Reset the card the way they do it in the Crynwr packet driver */ - for (i=0; i<8; i++) + for (i=0; i<8; i++) outb(0x0, base_addr + NE_RESET); inb(base_addr + NE_RESET); outb(0x21, base_addr + NE_CMD); @@ -388,10 +388,10 @@ static int __init ne2_probe1(struct net_device *dev, int slot) #else /* _I_ never tested it this way .. Go ahead and try ...*/ /* Reset card. Who knows what dain-bramaged state it was left in. */ - { + { unsigned long reset_start_time = jiffies; - /* DON'T change these to inb_p/outb_p or reset will fail on + /* DON'T change these to inb_p/outb_p or reset will fail on clones.. */ outb(inb(base_addr + NE_RESET), base_addr + NE_RESET); @@ -408,16 +408,16 @@ static int __init ne2_probe1(struct net_device *dev, int slot) /* Read the 16 bytes of station address PROM. - We must first initialize registers, similar to + We must first initialize registers, similar to NS8390_init(eifdev, 0). We can't reliably read the SAPROM address without this. (I learned the hard way!). */ { - struct { - unsigned char value, offset; + struct { + unsigned char value, offset; } program_seq[] = { /* Select page 0 */ - {E8390_NODMA+E8390_PAGE0+E8390_STOP, E8390_CMD}, + {E8390_NODMA+E8390_PAGE0+E8390_STOP, E8390_CMD}, {0x49, EN0_DCFG}, /* Set WORD-wide (0x49) access. */ {0x00, EN0_RCNTLO}, /* Clear the count regs. */ {0x00, EN0_RCNTHI}, @@ -433,7 +433,7 @@ static int __init ne2_probe1(struct net_device *dev, int slot) }; for (i = 0; i < sizeof(program_seq)/sizeof(program_seq[0]); i++) - outb_p(program_seq[i].value, base_addr + + outb_p(program_seq[i].value, base_addr + program_seq[i].offset); } @@ -464,7 +464,7 @@ static int __init ne2_probe1(struct net_device *dev, int slot) share and the board will usually be enabled. */ retval = request_irq(dev->irq, ei_interrupt, 0, DRV_NAME, dev); if (retval) { - printk (" unable to get IRQ %d (irqval=%d).\n", + printk (" unable to get IRQ %d (irqval=%d).\n", dev->irq, retval); goto out; } @@ -496,9 +496,9 @@ static int __init ne2_probe1(struct net_device *dev, int slot) ei_status.block_input = &ne_block_input; ei_status.block_output = &ne_block_output; ei_status.get_8390_hdr = &ne_get_8390_hdr; - + ei_status.priv = slot; - + dev->open = &ne_open; dev->stop = &ne_close; #ifdef CONFIG_NET_POLL_CONTROLLER @@ -538,7 +538,7 @@ static void ne_reset_8390(struct net_device *dev) { unsigned long reset_start_time = jiffies; - if (ei_debug > 1) + if (ei_debug > 1) printk("resetting the 8390 t=%ld...", jiffies); /* DON'T change these to inb_p/outb_p or reset will fail on clones. */ @@ -550,7 +550,7 @@ static void ne_reset_8390(struct net_device *dev) /* This check _should_not_ be necessary, omit eventually. */ while ((inb_p(NE_BASE+EN0_ISR) & ENISR_RESET) == 0) if (time_after(jiffies, reset_start_time + 2*HZ/100)) { - printk("%s: ne_reset_8390() did not complete.\n", + printk("%s: ne_reset_8390() did not complete.\n", dev->name); break; } @@ -561,13 +561,13 @@ static void ne_reset_8390(struct net_device *dev) we don't need to be concerned with ring wrap as the header will be at the start of a page, so we optimize accordingly. */ -static void ne_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr, +static void ne_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr, int ring_page) { int nic_base = dev->base_addr; - /* This *shouldn't* happen. + /* This *shouldn't* happen. If it does, it's the last thing you'll see */ if (ei_status.dmaing) { printk("%s: DMAing conflict in ne_get_8390_hdr " @@ -585,10 +585,10 @@ static void ne_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr, outb_p(E8390_RREAD+E8390_START, nic_base + NE_CMD); if (ei_status.word16) - insw(NE_BASE + NE_DATAPORT, hdr, + insw(NE_BASE + NE_DATAPORT, hdr, sizeof(struct e8390_pkt_hdr)>>1); else - insb(NE_BASE + NE_DATAPORT, hdr, + insb(NE_BASE + NE_DATAPORT, hdr, sizeof(struct e8390_pkt_hdr)); outb_p(ENISR_RDC, nic_base + EN0_ISR); /* Ack intr. */ @@ -600,7 +600,7 @@ static void ne_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr, hints. The NEx000 doesn't share the on-board packet memory -- you have to put the packet out through the "remote DMA" dataport using outb. */ -static void ne_block_input(struct net_device *dev, int count, struct sk_buff *skb, +static void ne_block_input(struct net_device *dev, int count, struct sk_buff *skb, int ring_offset) { #ifdef NE_SANITY_CHECK @@ -609,7 +609,7 @@ static void ne_block_input(struct net_device *dev, int count, struct sk_buff *sk int nic_base = dev->base_addr; char *buf = skb->data; - /* This *shouldn't* happen. + /* This *shouldn't* happen. If it does, it's the last thing you'll see */ if (ei_status.dmaing) { printk("%s: DMAing conflict in ne_block_input " @@ -677,7 +677,7 @@ static void ne_block_output(struct net_device *dev, int count, if (ei_status.word16 && (count & 0x01)) count++; - /* This *shouldn't* happen. + /* This *shouldn't* happen. If it does, it's the last thing you'll see */ if (ei_status.dmaing) { printk("%s: DMAing conflict in ne_block_output." |