Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 453 insertions, 0 deletions

diff --git a/drivers/mtd/maps/sa1100-flash.c b/drivers/mtd/maps/sa1100-flash.c
new file mode 100644
index 00000000000..0a6f861c4cd
--- /dev/null
+++ b/drivers/mtd/maps/sa1100-flash.c
@@ -0,0 +1,453 @@
+/*
+ * Flash memory access on SA11x0 based devices
+ * 
+ * (C) 2000 Nicolas Pitre <nico@cam.org>
+ * 
+ * $Id: sa1100-flash.c,v 1.47 2004/11/01 13:44:36 rmk Exp $
+ */
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/ioport.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/device.h>
+#include <linux/err.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/concat.h>
+
+#include <asm/mach-types.h>
+#include <asm/io.h>
+#include <asm/sizes.h>
+#include <asm/mach/flash.h>
+
+#if 0
+/*
+ * This is here for documentation purposes only - until these people
+ * submit their machine types.  It will be gone January 2005.
+ */
+static struct mtd_partition consus_partitions[] = {
+	{
+		.name		= "Consus boot firmware",
+		.offset		= 0,
+		.size		= 0x00040000,
+		.mask_flags	= MTD_WRITABLE, /* force read-only */
+	}, {
+		.name		= "Consus kernel",
+		.offset		= 0x00040000,
+		.size		= 0x00100000,
+		.mask_flags	= 0,
+	}, {
+		.name		= "Consus disk",
+		.offset		= 0x00140000,
+		/* The rest (up to 16M) for jffs.  We could put 0 and
+		   make it find the size automatically, but right now
+		   i have 32 megs.  jffs will use all 32 megs if given
+		   the chance, and this leads to horrible problems
+		   when you try to re-flash the image because blob
+		   won't erase the whole partition. */
+		.size		= 0x01000000 - 0x00140000,
+		.mask_flags	= 0,
+	}, {
+		/* this disk is a secondary disk, which can be used as
+		   needed, for simplicity, make it the size of the other
+		   consus partition, although realistically it could be
+		   the remainder of the disk (depending on the file
+		   system used) */
+		 .name		= "Consus disk2",
+		 .offset	= 0x01000000,
+		 .size		= 0x01000000 - 0x00140000,
+		 .mask_flags	= 0,
+	}
+};
+
+/* Frodo has 2 x 16M 28F128J3A flash chips in bank 0: */
+static struct mtd_partition frodo_partitions[] =
+{
+	{
+		.name		= "bootloader",
+		.size		= 0x00040000,
+		.offset		= 0x00000000,
+		.mask_flags	= MTD_WRITEABLE
+	}, {
+		.name		= "bootloader params",
+		.size		= 0x00040000,
+		.offset		= MTDPART_OFS_APPEND,
+		.mask_flags	= MTD_WRITEABLE
+	}, {
+		.name		= "kernel",
+		.size		= 0x00100000,
+		.offset		= MTDPART_OFS_APPEND,
+		.mask_flags	= MTD_WRITEABLE
+	}, {
+		.name		= "ramdisk",
+		.size		= 0x00400000,
+		.offset		= MTDPART_OFS_APPEND,
+		.mask_flags	= MTD_WRITEABLE
+	}, {
+		.name		= "file system",
+		.size		= MTDPART_SIZ_FULL,
+		.offset		= MTDPART_OFS_APPEND
+	}
+};
+
+static struct mtd_partition jornada56x_partitions[] = {
+	{
+		.name		= "bootldr",
+		.size		= 0x00040000,
+		.offset		= 0,
+		.mask_flags	= MTD_WRITEABLE,
+	}, {
+		.name		= "rootfs",
+		.size		= MTDPART_SIZ_FULL,
+		.offset		= MTDPART_OFS_APPEND,
+	}
+};
+
+static void jornada56x_set_vpp(int vpp)
+{
+	if (vpp)
+		GPSR = GPIO_GPIO26;
+	else
+		GPCR = GPIO_GPIO26;
+	GPDR |= GPIO_GPIO26;
+}
+
+/*
+ * Machine        Phys          Size    set_vpp
+ * Consus    : SA1100_CS0_PHYS SZ_32M
+ * Frodo     : SA1100_CS0_PHYS SZ_32M
+ * Jornada56x: SA1100_CS0_PHYS SZ_32M jornada56x_set_vpp
+ */
+#endif
+
+struct sa_subdev_info {
+	char name[16];
+	struct map_info map;
+	struct mtd_info *mtd;
+	struct flash_platform_data *data;
+};
+
+struct sa_info {
+	struct mtd_partition	*parts;
+	struct mtd_info		*mtd;
+	int			num_subdev;
+	struct sa_subdev_info	subdev[0];
+};
+
+static void sa1100_set_vpp(struct map_info *map, int on)
+{
+	struct sa_subdev_info *subdev = container_of(map, struct sa_subdev_info, map);
+	subdev->data->set_vpp(on);
+}
+
+static void sa1100_destroy_subdev(struct sa_subdev_info *subdev)
+{
+	if (subdev->mtd)
+		map_destroy(subdev->mtd);
+	if (subdev->map.virt)
+		iounmap(subdev->map.virt);
+	release_mem_region(subdev->map.phys, subdev->map.size);
+}
+
+static int sa1100_probe_subdev(struct sa_subdev_info *subdev, struct resource *res)
+{
+	unsigned long phys;
+	unsigned int size;
+	int ret;
+
+	phys = res->start;
+	size = res->end - phys + 1;
+
+	/*
+	 * Retrieve the bankwidth from the MSC registers.
+	 * We currently only implement CS0 and CS1 here.
+	 */
+	switch (phys) {
+	default:
+		printk(KERN_WARNING "SA1100 flash: unknown base address "
+		       "0x%08lx, assuming CS0\n", phys);
+
+	case SA1100_CS0_PHYS:
+		subdev->map.bankwidth = (MSC0 & MSC_RBW) ? 2 : 4;
+		break;
+
+	case SA1100_CS1_PHYS:
+		subdev->map.bankwidth = ((MSC0 >> 16) & MSC_RBW) ? 2 : 4;
+		break;
+	}
+
+	if (!request_mem_region(phys, size, subdev->name)) {
+		ret = -EBUSY;
+		goto out;
+	}
+
+	if (subdev->data->set_vpp)
+		subdev->map.set_vpp = sa1100_set_vpp;
+
+	subdev->map.phys = phys;
+	subdev->map.size = size;
+	subdev->map.virt = ioremap(phys, size);
+	if (!subdev->map.virt) {
+		ret = -ENOMEM;
+		goto err;
+	}
+
+	simple_map_init(&subdev->map);
+
+	/*
+	 * Now let's probe for the actual flash.  Do it here since
+	 * specific machine settings might have been set above.
+	 */
+	subdev->mtd = do_map_probe(subdev->data->map_name, &subdev->map);
+	if (subdev->mtd == NULL) {
+		ret = -ENXIO;
+		goto err;
+	}
+	subdev->mtd->owner = THIS_MODULE;
+
+	printk(KERN_INFO "SA1100 flash: CFI device at 0x%08lx, %dMiB, "
+		"%d-bit\n", phys, subdev->mtd->size >> 20,
+		subdev->map.bankwidth * 8);
+
+	return 0;
+
+ err:
+	sa1100_destroy_subdev(subdev);
+ out:
+	return ret;
+}
+
+static void sa1100_destroy(struct sa_info *info)
+{
+	int i;
+
+	if (info->mtd) {
+		del_mtd_partitions(info->mtd);
+
+#ifdef CONFIG_MTD_CONCAT
+		if (info->mtd != info->subdev[0].mtd)
+			mtd_concat_destroy(info->mtd);
+#endif
+	}
+
+	if (info->parts)
+		kfree(info->parts);
+
+	for (i = info->num_subdev - 1; i >= 0; i--)
+		sa1100_destroy_subdev(&info->subdev[i]);
+	kfree(info);
+}
+
+static struct sa_info *__init
+sa1100_setup_mtd(struct platform_device *pdev, struct flash_platform_data *flash)
+{
+	struct sa_info *info;
+	int nr, size, i, ret = 0;
+
+	/*
+	 * Count number of devices.
+	 */
+	for (nr = 0; ; nr++)
+		if (!platform_get_resource(pdev, IORESOURCE_MEM, nr))
+			break;
+
+	if (nr == 0) {
+		ret = -ENODEV;
+		goto out;
+	}
+
+	size = sizeof(struct sa_info) + sizeof(struct sa_subdev_info) * nr;
+
+	/*
+	 * Allocate the map_info structs in one go.
+	 */
+	info = kmalloc(size, GFP_KERNEL);
+	if (!info) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	memset(info, 0, size);
+
+	/*
+	 * Claim and then map the memory regions.
+	 */
+	for (i = 0; i < nr; i++) {
+		struct sa_subdev_info *subdev = &info->subdev[i];
+		struct resource *res;
+
+		res = platform_get_resource(pdev, IORESOURCE_MEM, i);
+		if (!res)
+			break;
+
+		subdev->map.name = subdev->name;
+		sprintf(subdev->name, "sa1100-%d", i);
+		subdev->data = flash;
+
+		ret = sa1100_probe_subdev(subdev, res);
+		if (ret)
+			break;
+	}
+
+	info->num_subdev = i;
+
+	/*
+	 * ENXIO is special.  It means we didn't find a chip when we probed.
+	 */
+	if (ret != 0 && !(ret == -ENXIO && info->num_subdev > 0))
+		goto err;
+
+	/*
+	 * If we found one device, don't bother with concat support.  If
+	 * we found multiple devices, use concat if we have it available,
+	 * otherwise fail.  Either way, it'll be called "sa1100".
+	 */
+	if (info->num_subdev == 1) {
+		strcpy(info->subdev[0].name, "sa1100");
+		info->mtd = info->subdev[0].mtd;
+		ret = 0;
+	} else if (info->num_subdev > 1) {
+#ifdef CONFIG_MTD_CONCAT
+		struct mtd_info *cdev[nr];
+		/*
+		 * We detected multiple devices.  Concatenate them together.
+		 */
+		for (i = 0; i < info->num_subdev; i++)
+			cdev[i] = info->subdev[i].mtd;
+
+		info->mtd = mtd_concat_create(cdev, info->num_subdev,
+					      "sa1100");
+		if (info->mtd == NULL)
+			ret = -ENXIO;
+#else
+		printk(KERN_ERR "SA1100 flash: multiple devices "
+		       "found but MTD concat support disabled.\n");
+		ret = -ENXIO;
+#endif
+	}
+
+	if (ret == 0)
+		return info;
+
+ err:
+	sa1100_destroy(info);
+ out:
+	return ERR_PTR(ret);
+}
+
+static const char *part_probes[] = { "cmdlinepart", "RedBoot", NULL };
+
+static int __init sa1100_mtd_probe(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct flash_platform_data *flash = pdev->dev.platform_data;
+	struct mtd_partition *parts;
+	const char *part_type = NULL;
+	struct sa_info *info;
+	int err, nr_parts = 0;
+
+	if (!flash)
+		return -ENODEV;
+
+	info = sa1100_setup_mtd(pdev, flash);
+	if (IS_ERR(info)) {
+		err = PTR_ERR(info);
+		goto out;
+	}
+
+	/*
+	 * Partition selection stuff.
+	 */
+#ifdef CONFIG_MTD_PARTITIONS
+	nr_parts = parse_mtd_partitions(info->mtd, part_probes, &parts, 0);
+	if (nr_parts > 0) {
+		info->parts = parts;
+		part_type = "dynamic";
+	} else
+#endif
+	{
+		parts = flash->parts;
+		nr_parts = flash->nr_parts;
+		part_type = "static";
+	}
+
+	if (nr_parts == 0) {
+		printk(KERN_NOTICE "SA1100 flash: no partition info "
+			"available, registering whole flash\n");
+		add_mtd_device(info->mtd);
+	} else {
+		printk(KERN_NOTICE "SA1100 flash: using %s partition "
+			"definition\n", part_type);
+		add_mtd_partitions(info->mtd, parts, nr_parts);
+	}
+
+	dev_set_drvdata(dev, info);
+	err = 0;
+
+ out:
+	return err;
+}
+
+static int __exit sa1100_mtd_remove(struct device *dev)
+{
+	struct sa_info *info = dev_get_drvdata(dev);
+	dev_set_drvdata(dev, NULL);
+	sa1100_destroy(info);
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int sa1100_mtd_suspend(struct device *dev, u32 state, u32 level)
+{
+	struct sa_info *info = dev_get_drvdata(dev);
+	int ret = 0;
+
+	if (info && level == SUSPEND_SAVE_STATE)
+		ret = info->mtd->suspend(info->mtd);
+
+	return ret;
+}
+
+static int sa1100_mtd_resume(struct device *dev, u32 level)
+{
+	struct sa_info *info = dev_get_drvdata(dev);
+	if (info && level == RESUME_RESTORE_STATE)
+		info->mtd->resume(info->mtd);
+	return 0;
+}
+#else
+#define sa1100_mtd_suspend NULL
+#define sa1100_mtd_resume  NULL
+#endif
+
+static struct device_driver sa1100_mtd_driver = {
+	.name		= "flash",
+	.bus		= &platform_bus_type,
+	.probe		= sa1100_mtd_probe,
+	.remove		= __exit_p(sa1100_mtd_remove),
+	.suspend	= sa1100_mtd_suspend,
+	.resume		= sa1100_mtd_resume,
+};
+
+static int __init sa1100_mtd_init(void)
+{
+	return driver_register(&sa1100_mtd_driver);
+}
+
+static void __exit sa1100_mtd_exit(void)
+{
+	driver_unregister(&sa1100_mtd_driver);
+}
+
+module_init(sa1100_mtd_init);
+module_exit(sa1100_mtd_exit);
+
+MODULE_AUTHOR("Nicolas Pitre");
+MODULE_DESCRIPTION("SA1100 CFI map driver");
+MODULE_LICENSE("GPL");