summaryrefslogtreecommitdiff
path: root/drivers/mmc/host/Kconfig
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2013-05-04 13:45:17 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2013-05-04 13:45:17 -0700
commit173192958d06b8d1eb44f56d74373052ad6a9a60 (patch)
tree838a4f063c994d4d0a6259a85f21005c4098b752 /drivers/mmc/host/Kconfig
parente72a5d1ceb1c5cbe39c35c1c7a7f5909cbe8451a (diff)
parente4404fab2e0b70287a471a1e760c9338ce683fde (diff)
downloadlinux-3.10-173192958d06b8d1eb44f56d74373052ad6a9a60.tar.gz
linux-3.10-173192958d06b8d1eb44f56d74373052ad6a9a60.tar.bz2
linux-3.10-173192958d06b8d1eb44f56d74373052ad6a9a60.zip
Merge tag 'mmc-updates-for-3.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc
Pull MMC update from Chris Ball: "MMC highlights for 3.10: Core: - Introduce MMC_CAP2_NO_PRESCAN_POWERUP to allow skipping mmc_power_up() at boot/initialization time if it's already happened, for performance (faster boot time) reasons. - Fix a bit width test failure that resulted in old eMMC cards being put into 1-bit mode when 4-bit mode was available. - Expose fwrev/hwrev for MMCv4 parts. - Improve card removal logic in the case where the card's removed slowly; we were missing card removal events if the card retained contact with the slot pads for long enough to reply to a CMD13 while being removed. Drivers: - davinci_mmc: Support using PIO instead of DMA. - dw_mmc: Add support for Exynos4412. - mxcmmc: DT support, use slot-gpio API. - mxs-mmc: Add broken-cd/cd-inverted/non-removable DT property support. - sdhci-sirf: New sdhci-pltfm driver for CSR SiRF SoCs: SiRFprimaII: unicore ARM Cortex-A9 SiRFatlas6: unicore ARM Cortex-A9 SiRFmarco: dual core ARM Cortex-A9 SMP - sdhci-tegra: Add support for Tegra114 platforms, use mmc_of_parse()" * tag 'mmc-updates-for-3.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: (66 commits) mmc: sdhci-tegra: fix MODULE_DEVICE_TABLE mmc: core: fix init controller performance regression, updated patch mmc: mxcmmc: enable DMA support on mpc512x mmc: mxcmmc: constify mxcmci_devtype mmc: mxcmmc: use slot-gpio API for write-protect detection mmc: mxcmmc: add mpc512x SDHC support mmc: mxcmmc: fix race conditions for host->req and host->data access mmc: mxcmmc: DT support mmc: dw_mmc: let device core setup the default pin configuration mmc: mxs-mmc: add broken-cd property mmc: mxs-mmc: add non-removable property mmc: mxs-mmc: add cd-inverted property mmc: core: call pm_runtime_put_noidle in pm_runtime_get_sync failed case mmc: mxcmmc: Fix bug when card is present during boot mmc: core: fix performance regression initializing MMC host controllers Revert "mmc: core: wait while adding MMC host to ensure root mounts successfully" mmc: atmel-mci: pio hang on block errors mmc: core: Fix bit width test failing on old eMMC cards mmc: dw_mmc: Use pr_info instead of printk mmc: dw_mmc: Check return value of regulator_enable ...
Diffstat (limited to 'drivers/mmc/host/Kconfig')
-rw-r--r--drivers/mmc/host/Kconfig31
1 files changed, 16 insertions, 15 deletions
diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
index d88219e1d86..9ab8f8dee94 100644
--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
@@ -190,6 +190,17 @@ config MMC_SDHCI_S3C
If unsure, say N.
+config MMC_SDHCI_SIRF
+ tristate "SDHCI support on CSR SiRFprimaII and SiRFmarco SoCs"
+ depends on ARCH_SIRF
+ depends on MMC_SDHCI_PLTFM
+ help
+ This selects the SDHCI support for SiRF System-on-Chip devices.
+
+ If you have a controller with this interface, say Y or M here.
+
+ If unsure, say N.
+
config MMC_SDHCI_PXAV3
tristate "Marvell MMP2 SD Host Controller support (PXAV3)"
depends on CLKDEV_LOOKUP
@@ -300,16 +311,6 @@ config MMC_ATMELMCI
If unsure, say N.
-config MMC_ATMELMCI_DMA
- bool "Atmel MCI DMA support"
- depends on MMC_ATMELMCI && (AVR32 || ARCH_AT91SAM9G45) && DMA_ENGINE
- help
- Say Y here to have the Atmel MCI driver use a DMA engine to
- do data transfers and thus increase the throughput and
- reduce the CPU utilization.
-
- If unsure, say N.
-
config MMC_MSM
tristate "Qualcomm SDCC Controller Support"
depends on MMC && ARCH_MSM
@@ -319,12 +320,12 @@ config MMC_MSM
support for SDIO devices.
config MMC_MXC
- tristate "Freescale i.MX21/27/31 Multimedia Card Interface support"
- depends on ARCH_MXC
+ tristate "Freescale i.MX21/27/31 or MPC512x Multimedia Card support"
+ depends on ARCH_MXC || PPC_MPC512x
help
- This selects the Freescale i.MX21, i.MX27 and i.MX31 Multimedia card
- Interface. If you have a i.MX platform with a Multimedia Card slot,
- say Y or M here.
+ This selects the Freescale i.MX21, i.MX27, i.MX31 or MPC512x
+ Multimedia Card Interface. If you have an i.MX or MPC512x platform
+ with a Multimedia Card slot, say Y or M here.
If unsure, say N.