leds: Add openfirmware platform device support

Add bindings to support LEDs defined as of_platform devices in addition to
the existing bindings for platform devices.

New options in Kconfig allow the platform binding code and/or the
of_platform code to be turned on.  The of_platform code is of course only
available on archs that have OF support.

The existing probe and remove methods are refactored to use new functions
create_gpio_led(), to create and register one led, and delete_gpio_led(),
to unregister and free one led.  The new probe and remove methods for the
of_platform driver can then share most of the common probe and remove code
with the platform driver.

The suspend and resume methods aren't shared, but they are very short.  The
actual led driving code is the same for LEDs created by either binding.

The OF bindings are based on patch by Anton Vorontsov
<avorontsov@ru.mvista.com>.  They have been extended to allow multiple LEDs
per device.

Signed-off-by: Trent Piepho <tpiepho@freescale.com>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Sean MacLennan <smaclennan@pikatech.com>
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>

2 files changed, 182 insertions, 44 deletions

diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
index d9db17624f1..90d39e5803c 100644
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -117,7 +117,26 @@ config LEDS_GPIO
 	help
 	  This option enables support for the LEDs connected to GPIO
 	  outputs. To be useful the particular board must have LEDs
-	  and they must be connected to the GPIO lines.
+	  and they must be connected to the GPIO lines.  The LEDs must be
+	  defined as platform devices and/or OpenFirmware platform devices.
+	  The code to use these bindings can be selected below.
+
+config LEDS_GPIO_PLATFORM
+	bool "Platform device bindings for GPIO LEDs"
+	depends on LEDS_GPIO
+	default y
+	help
+	  Let the leds-gpio driver drive LEDs which have been defined as
+	  platform devices.  If you don't know what this means, say yes.
+
+config LEDS_GPIO_OF
+	bool "OpenFirmware platform device bindings for GPIO LEDs"
+	depends on LEDS_GPIO && OF_DEVICE
+	default y
+	help
+	  Let the leds-gpio driver drive LEDs which have been defined as
+	  of_platform devices.  For instance, LEDs which are listed in a "dts"
+	  file.
 
 config LEDS_CLEVO_MAIL
 	tristate "Mail LED on Clevo notebook (EXPERIMENTAL)"
diff --git a/drivers/leds/leds-gpio.c b/drivers/leds/leds-gpio.c
index 2e3df08b649..f8bcf98fc15 100644
--- a/drivers/leds/leds-gpio.c
+++ b/drivers/leds/leds-gpio.c
@@ -3,6 +3,7 @@
  *
  * Copyright (C) 2007 8D Technologies inc.
  * Raphael Assenat <raph@8d.com>
+ * Copyright (C) 2008 Freescale Semiconductor, Inc.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -71,11 +72,57 @@ static int gpio_blink_set(struct led_classdev *led_cdev,
 	return led_dat->platform_gpio_blink_set(led_dat->gpio, delay_on, delay_off);
 }
 
+static int __devinit create_gpio_led(const struct gpio_led *template,
+	struct gpio_led_data *led_dat, struct device *parent,
+	int (*blink_set)(unsigned, unsigned long *, unsigned long *))
+{
+	int ret;
+
+	ret = gpio_request(template->gpio, template->name);
+	if (ret < 0)
+		return ret;
+
+	led_dat->cdev.name = template->name;
+	led_dat->cdev.default_trigger = template->default_trigger;
+	led_dat->gpio = template->gpio;
+	led_dat->can_sleep = gpio_cansleep(template->gpio);
+	led_dat->active_low = template->active_low;
+	if (blink_set) {
+		led_dat->platform_gpio_blink_set = blink_set;
+		led_dat->cdev.blink_set = gpio_blink_set;
+	}
+	led_dat->cdev.brightness_set = gpio_led_set;
+	led_dat->cdev.brightness = LED_OFF;
+	led_dat->cdev.flags |= LED_CORE_SUSPENDRESUME;
+
+	ret = gpio_direction_output(led_dat->gpio, led_dat->active_low);
+	if (ret < 0)
+		goto err;
+
+	INIT_WORK(&led_dat->work, gpio_led_work);
+
+	ret = led_classdev_register(parent, &led_dat->cdev);
+	if (ret < 0)
+		goto err;
+
+	return 0;
+err:
+	gpio_free(led_dat->gpio);
+	return ret;
+}
+
+static void delete_gpio_led(struct gpio_led_data *led)
+{
+	led_classdev_unregister(&led->cdev);
+	cancel_work_sync(&led->work);
+	gpio_free(led->gpio);
+}
+
+#ifdef CONFIG_LEDS_GPIO_PLATFORM
 static int gpio_led_probe(struct platform_device *pdev)
 {
 	struct gpio_led_platform_data *pdata = pdev->dev.platform_data;
-	struct gpio_led *cur_led;
-	struct gpio_led_data *leds_data, *led_dat;
+	struct gpio_led_data *leds_data;
 	int i, ret = 0;
 
 	if (!pdata)
@@ -87,35 +134,10 @@ static int gpio_led_probe(struct platform_device *pdev)
 		return -ENOMEM;
 
 	for (i = 0; i < pdata->num_leds; i++) {
-		cur_led = &pdata->leds[i];
-		led_dat = &leds_data[i];
-
-		ret = gpio_request(cur_led->gpio, cur_led->name);
+		ret = create_gpio_led(&pdata->leds[i], &leds_data[i],
+				      &pdev->dev, pdata->gpio_blink_set);
 		if (ret < 0)
 			goto err;
-
-		led_dat->cdev.name = cur_led->name;
-		led_dat->cdev.default_trigger = cur_led->default_trigger;
-		led_dat->gpio = cur_led->gpio;
-		led_dat->can_sleep = gpio_cansleep(cur_led->gpio);
-		led_dat->active_low = cur_led->active_low;
-		if (pdata->gpio_blink_set) {
-			led_dat->platform_gpio_blink_set = pdata->gpio_blink_set;
-			led_dat->cdev.blink_set = gpio_blink_set;
-		}
-		led_dat->cdev.brightness_set = gpio_led_set;
-		led_dat->cdev.brightness = LED_OFF;
-		led_dat->cdev.flags |= LED_CORE_SUSPENDRESUME;
-
-		gpio_direction_output(led_dat->gpio, led_dat->active_low);
-
-		INIT_WORK(&led_dat->work, gpio_led_work);
-
-		ret = led_classdev_register(&pdev->dev, &led_dat->cdev);
-		if (ret < 0) {
-			gpio_free(led_dat->gpio);
-			goto err;
-		}
 	}
 
 	platform_set_drvdata(pdev, leds_data);
@@ -123,13 +145,8 @@ static int gpio_led_probe(struct platform_device *pdev)
 	return 0;
 
 err:
-	if (i > 0) {
-		for (i = i - 1; i >= 0; i--) {
-			led_classdev_unregister(&leds_data[i].cdev);
-			cancel_work_sync(&leds_data[i].work);
-			gpio_free(leds_data[i].gpio);
-		}
-	}
+	for (i = i - 1; i >= 0; i--)
+		delete_gpio_led(&leds_data[i]);
 
 	kfree(leds_data);
 
@@ -144,11 +161,8 @@ static int __devexit gpio_led_remove(struct platform_device *pdev)
 
 	leds_data = platform_get_drvdata(pdev);
 
-	for (i = 0; i < pdata->num_leds; i++) {
-		led_classdev_unregister(&leds_data[i].cdev);
-		cancel_work_sync(&leds_data[i].work);
-		gpio_free(leds_data[i].gpio);
-	}
+	for (i = 0; i < pdata->num_leds; i++)
+		delete_gpio_led(&leds_data[i]);
 
 	kfree(leds_data);
 
@@ -177,7 +191,112 @@ static void __exit gpio_led_exit(void)
 module_init(gpio_led_init);
 module_exit(gpio_led_exit);
 
-MODULE_AUTHOR("Raphael Assenat <raph@8d.com>");
+MODULE_ALIAS("platform:leds-gpio");
+#endif /* CONFIG_LEDS_GPIO_PLATFORM */
+
+/* Code to create from OpenFirmware platform devices */
+#ifdef CONFIG_LEDS_GPIO_OF
+#include <linux/of_platform.h>
+#include <linux/of_gpio.h>
+
+struct gpio_led_of_platform_data {
+	int num_leds;
+	struct gpio_led_data led_data[];
+};
+
+static int __devinit of_gpio_leds_probe(struct of_device *ofdev,
+					const struct of_device_id *match)
+{
+	struct device_node *np = ofdev->node, *child;
+	struct gpio_led led;
+	struct gpio_led_of_platform_data *pdata;
+	int count = 0, ret;
+
+	/* count LEDs defined by this device, so we know how much to allocate */
+	for_each_child_of_node(np, child)
+		count++;
+	if (!count)
+		return 0; /* or ENODEV? */
+
+	pdata = kzalloc(sizeof(*pdata) + sizeof(struct gpio_led_data) * count,
+			GFP_KERNEL);
+	if (!pdata)
+		return -ENOMEM;
+
+	memset(&led, 0, sizeof(led));
+	for_each_child_of_node(np, child) {
+		enum of_gpio_flags flags;
+
+		led.gpio = of_get_gpio_flags(child, 0, &flags);
+		led.active_low = flags & OF_GPIO_ACTIVE_LOW;
+		led.name = of_get_property(child, "label", NULL) ? : child->name;
+		led.default_trigger =
+			of_get_property(child, "linux,default-trigger", NULL);
+
+		ret = create_gpio_led(&led, &pdata->led_data[pdata->num_leds++],
+				      &ofdev->dev, NULL);
+		if (ret < 0) {
+			of_node_put(child);
+			goto err;
+		}
+	}
+
+	dev_set_drvdata(&ofdev->dev, pdata);
+
+	return 0;
+
+err:
+	for (count = pdata->num_leds - 2; count >= 0; count--)
+		delete_gpio_led(&pdata->led_data[count]);
+
+	kfree(pdata);
+
+	return ret;
+}
+
+static int __devexit of_gpio_leds_remove(struct of_device *ofdev)
+{
+	struct gpio_led_of_platform_data *pdata = dev_get_drvdata(&ofdev->dev);
+	int i;
+
+	for (i = 0; i < pdata->num_leds; i++)
+		delete_gpio_led(&pdata->led_data[i]);
+
+	kfree(pdata);
+
+	dev_set_drvdata(&ofdev->dev, NULL);
+
+	return 0;
+}
+
+static const struct of_device_id of_gpio_leds_match[] = {
+	{ .compatible = "gpio-leds", },
+	{},
+};
+
+static struct of_platform_driver of_gpio_leds_driver = {
+	.driver = {
+		.name = "of_gpio_leds",
+		.owner = THIS_MODULE,
+	},
+	.match_table = of_gpio_leds_match,
+	.probe = of_gpio_leds_probe,
+	.remove = __devexit_p(of_gpio_leds_remove),
+};
+
+static int __init of_gpio_leds_init(void)
+{
+	return of_register_platform_driver(&of_gpio_leds_driver);
+}
+module_init(of_gpio_leds_init);
+
+static void __exit of_gpio_leds_exit(void)
+{
+	of_unregister_platform_driver(&of_gpio_leds_driver);
+}
+module_exit(of_gpio_leds_exit);
+#endif
+
+MODULE_AUTHOR("Raphael Assenat <raph@8d.com>, Trent Piepho <tpiepho@freescale.com>");
 MODULE_DESCRIPTION("GPIO LED driver");
 MODULE_LICENSE("GPL");
-MODULE_ALIAS("platform:leds-gpio");