Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

105 files changed, 48392 insertions, 0 deletions

diff --git a/drivers/i2c/Kconfig b/drivers/i2c/Kconfig
new file mode 100644
index 00000000000..24383afdda7
--- /dev/null
+++ b/drivers/i2c/Kconfig
@@ -0,0 +1,77 @@
+#
+# Character device configuration
+#
+
+menu "I2C support"
+
+config I2C
+	tristate "I2C support"
+	---help---
+	  I2C (pronounce: I-square-C) is a slow serial bus protocol used in
+	  many micro controller applications and developed by Philips.  SMBus,
+	  or System Management Bus is a subset of the I2C protocol.  More
+	  information is contained in the directory <file:Documentation/i2c/>,
+	  especially in the file called "summary" there.
+
+	  Both I2C and SMBus are supported here. You will need this for
+	  hardware sensors support, and also for Video For Linux support.
+
+	  If you want I2C support, you should say Y here and also to the
+	  specific driver for your bus adapter(s) below.
+
+	  This I2C support can also be built as a module.  If so, the module
+	  will be called i2c-core.
+
+config I2C_CHARDEV
+	tristate "I2C device interface"
+	depends on I2C
+	help
+	  Say Y here to use i2c-* device files, usually found in the /dev
+	  directory on your system.  They make it possible to have user-space
+	  programs use the I2C bus.  Information on how to do this is
+	  contained in the file <file:Documentation/i2c/dev-interface>.
+
+	  This support is also available as a module.  If so, the module 
+	  will be called i2c-dev.
+
+source drivers/i2c/algos/Kconfig
+source drivers/i2c/busses/Kconfig
+source drivers/i2c/chips/Kconfig
+
+config I2C_DEBUG_CORE
+	bool "I2C Core debugging messages"
+	depends on I2C
+	help
+	  Say Y here if you want the I2C core to produce a bunch of debug
+	  messages to the system log.  Select this if you are having a
+	  problem with I2C support and want to see more of what is going on.
+
+config I2C_DEBUG_ALGO
+	bool "I2C Algorithm debugging messages"
+	depends on I2C
+	help
+	  Say Y here if you want the I2C algorithm drivers to produce a bunch
+	  of debug messages to the system log.  Select this if you are having
+	  a problem with I2C support and want to see more of what is going
+	  on.
+
+config I2C_DEBUG_BUS
+	bool "I2C Bus debugging messages"
+	depends on I2C
+	help
+	  Say Y here if you want the I2C bus drivers to produce a bunch of
+	  debug messages to the system log.  Select this if you are having
+	  a problem with I2C support and want to see more of what is going
+	  on.
+
+config I2C_DEBUG_CHIP
+	bool "I2C Chip debugging messages"
+	depends on I2C
+	help
+	  Say Y here if you want the I2C chip drivers to produce a bunch of
+	  debug messages to the system log.  Select this if you are having
+	  a problem with I2C support and want to see more of what is going
+	  on.
+
+endmenu
+
diff --git a/drivers/i2c/Makefile b/drivers/i2c/Makefile
new file mode 100644
index 00000000000..cd170395a8c
--- /dev/null
+++ b/drivers/i2c/Makefile
@@ -0,0 +1,15 @@
+#
+# Makefile for the i2c core.
+#
+
+obj-$(CONFIG_I2C)		+= i2c-core.o
+obj-$(CONFIG_I2C_CHARDEV)	+= i2c-dev.o
+obj-$(CONFIG_I2C_SENSOR)	+= i2c-sensor.o
+obj-y				+= busses/ chips/ algos/
+
+i2c-sensor-objs := i2c-sensor-detect.o i2c-sensor-vid.o
+
+
+ifeq ($(CONFIG_I2C_DEBUG_CORE),y)
+EXTRA_CFLAGS += -DDEBUG
+endif
diff --git a/drivers/i2c/algos/Kconfig b/drivers/i2c/algos/Kconfig
new file mode 100644
index 00000000000..30408015d23
--- /dev/null
+++ b/drivers/i2c/algos/Kconfig
@@ -0,0 +1,70 @@
+#
+# Character device configuration
+#
+
+menu "I2C Algorithms"
+	depends on I2C
+
+config I2C_ALGOBIT
+	tristate "I2C bit-banging interfaces"
+	depends on I2C
+	help
+	  This allows you to use a range of I2C adapters called bit-banging
+	  adapters.  Say Y if you own an I2C adapter belonging to this class
+	  and then say Y to the specific driver for you adapter below.
+
+	  This support is also available as a module.  If so, the module 
+	  will be called i2c-algo-bit.
+
+config I2C_ALGOPCF
+	tristate "I2C PCF 8584 interfaces"
+	depends on I2C
+	help
+	  This allows you to use a range of I2C adapters called PCF adapters.
+	  Say Y if you own an I2C adapter belonging to this class and then say
+	  Y to the specific driver for you adapter below.
+
+	  This support is also available as a module.  If so, the module 
+	  will be called i2c-algo-pcf.
+
+config I2C_ALGOPCA
+	tristate "I2C PCA 9564 interfaces"
+	depends on I2C
+	help
+	  This allows you to use a range of I2C adapters called PCA adapters.
+	  Say Y if you own an I2C adapter belonging to this class and then say
+	  Y to the specific driver for you adapter below.
+
+	  This support is also available as a module.  If so, the module 
+	  will be called i2c-algo-pca.
+
+config I2C_ALGOITE
+	tristate "ITE I2C Algorithm"
+	depends on MIPS_ITE8172 && I2C
+	help
+	  This supports the use of the ITE8172 I2C interface found on some MIPS
+	  systems. Say Y if you have one of these. You should also say Y for
+	  the ITE I2C peripheral driver support below.
+
+	  This support is also available as a module.  If so, the module 
+	  will be called i2c-algo-ite.
+
+config I2C_ALGO8XX
+	tristate "MPC8xx CPM I2C interface"
+	depends on 8xx && I2C
+
+config I2C_ALGO_SIBYTE
+	tristate "SiByte SMBus interface"
+	depends on SIBYTE_SB1xxx_SOC && I2C
+	help
+	  Supports the SiByte SOC on-chip I2C interfaces (2 channels).
+
+config I2C_ALGO_SGI
+	tristate "I2C SGI interfaces"
+	depends on I2C && (SGI_IP22 || SGI_IP32 || X86_VISWS)
+	help
+	  Supports the SGI interfaces like the ones found on SGI Indy VINO
+	  or SGI O2 MACE.
+
+endmenu
+
diff --git a/drivers/i2c/algos/Makefile b/drivers/i2c/algos/Makefile
new file mode 100644
index 00000000000..867fe1f6740
--- /dev/null
+++ b/drivers/i2c/algos/Makefile
@@ -0,0 +1,14 @@
+#
+# Makefile for the i2c algorithms
+#
+
+obj-$(CONFIG_I2C_ALGOBIT)	+= i2c-algo-bit.o
+obj-$(CONFIG_I2C_ALGOPCF)	+= i2c-algo-pcf.o
+obj-$(CONFIG_I2C_ALGOPCA)	+= i2c-algo-pca.o
+obj-$(CONFIG_I2C_ALGOITE)	+= i2c-algo-ite.o
+obj-$(CONFIG_I2C_ALGO_SIBYTE)	+= i2c-algo-sibyte.o
+obj-$(CONFIG_I2C_ALGO_SGI)	+= i2c-algo-sgi.o
+
+ifeq ($(CONFIG_I2C_DEBUG_ALGO),y)
+EXTRA_CFLAGS += -DDEBUG
+endif
diff --git a/drivers/i2c/algos/i2c-algo-bit.c b/drivers/i2c/algos/i2c-algo-bit.c
new file mode 100644
index 00000000000..fb5b732238e
--- /dev/null
+++ b/drivers/i2c/algos/i2c-algo-bit.c
@@ -0,0 +1,573 @@
+/* ------------------------------------------------------------------------- */
+/* i2c-algo-bit.c i2c driver algorithms for bit-shift adapters		     */
+/* ------------------------------------------------------------------------- */
+/*   Copyright (C) 1995-2000 Simon G. Vogl
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.		     */
+/* ------------------------------------------------------------------------- */
+
+/* With some changes from Frodo Looijaard <frodol@dds.nl>, Kyösti Mälkki
+   <kmalkki@cc.hut.fi> and Jean Delvare <khali@linux-fr.org> */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/i2c.h>
+#include <linux/i2c-algo-bit.h>
+
+
+/* ----- global defines ----------------------------------------------- */
+#define DEB(x) if (i2c_debug>=1) x;
+#define DEB2(x) if (i2c_debug>=2) x;
+#define DEBSTAT(x) if (i2c_debug>=3) x; /* print several statistical values*/
+#define DEBPROTO(x) if (i2c_debug>=9) { x; }
+ 	/* debug the protocol by showing transferred bits */
+
+
+/* ----- global variables ---------------------------------------------	*/
+
+/* module parameters:
+ */
+static int i2c_debug;
+static int bit_test;	/* see if the line-setting functions work	*/
+
+/* --- setting states on the bus with the right timing: ---------------	*/
+
+#define setsda(adap,val) adap->setsda(adap->data, val)
+#define setscl(adap,val) adap->setscl(adap->data, val)
+#define getsda(adap) adap->getsda(adap->data)
+#define getscl(adap) adap->getscl(adap->data)
+
+static inline void sdalo(struct i2c_algo_bit_data *adap)
+{
+	setsda(adap,0);
+	udelay(adap->udelay);
+}
+
+static inline void sdahi(struct i2c_algo_bit_data *adap)
+{
+	setsda(adap,1);
+	udelay(adap->udelay);
+}
+
+static inline void scllo(struct i2c_algo_bit_data *adap)
+{
+	setscl(adap,0);
+	udelay(adap->udelay);
+}
+
+/*
+ * Raise scl line, and do checking for delays. This is necessary for slower
+ * devices.
+ */
+static inline int sclhi(struct i2c_algo_bit_data *adap)
+{
+	unsigned long start;
+
+	setscl(adap,1);
+
+	/* Not all adapters have scl sense line... */
+	if (adap->getscl == NULL ) {
+		udelay(adap->udelay);
+		return 0;
+	}
+
+	start=jiffies;
+	while (! getscl(adap) ) {	
+ 		/* the hw knows how to read the clock line,
+ 		 * so we wait until it actually gets high.
+ 		 * This is safer as some chips may hold it low
+ 		 * while they are processing data internally. 
+ 		 */
+		if (time_after_eq(jiffies, start+adap->timeout)) {
+			return -ETIMEDOUT;
+		}
+		cond_resched();
+	}
+	DEBSTAT(printk(KERN_DEBUG "needed %ld jiffies\n", jiffies-start));
+	udelay(adap->udelay);
+	return 0;
+} 
+
+
+/* --- other auxiliary functions --------------------------------------	*/
+static void i2c_start(struct i2c_algo_bit_data *adap) 
+{
+	/* assert: scl, sda are high */
+	DEBPROTO(printk("S "));
+	sdalo(adap);
+	scllo(adap);
+}
+
+static void i2c_repstart(struct i2c_algo_bit_data *adap) 
+{
+	/* scl, sda may not be high */
+	DEBPROTO(printk(" Sr "));
+	setsda(adap,1);
+	sclhi(adap);
+	udelay(adap->udelay);
+	
+	sdalo(adap);
+	scllo(adap);
+}
+
+
+static void i2c_stop(struct i2c_algo_bit_data *adap) 
+{
+	DEBPROTO(printk("P\n"));
+	/* assert: scl is low */
+	sdalo(adap);
+	sclhi(adap); 
+	sdahi(adap);
+}
+
+
+
+/* send a byte without start cond., look for arbitration, 
+   check ackn. from slave */
+/* returns:
+ * 1 if the device acknowledged
+ * 0 if the device did not ack
+ * -ETIMEDOUT if an error occurred (while raising the scl line)
+ */
+static int i2c_outb(struct i2c_adapter *i2c_adap, char c)
+{
+	int i;
+	int sb;
+	int ack;
+	struct i2c_algo_bit_data *adap = i2c_adap->algo_data;
+
+	/* assert: scl is low */
+	for ( i=7 ; i>=0 ; i-- ) {
+		sb = c & ( 1 << i );
+		setsda(adap,sb);
+		udelay(adap->udelay);
+		DEBPROTO(printk(KERN_DEBUG "%d",sb!=0));
+		if (sclhi(adap)<0) { /* timed out */
+			sdahi(adap); /* we don't want to block the net */
+			DEB2(printk(KERN_DEBUG " i2c_outb: 0x%02x, timeout at bit #%d\n", c&0xff, i));
+			return -ETIMEDOUT;
+		};
+		/* do arbitration here: 
+		 * if ( sb && ! getsda(adap) ) -> ouch! Get out of here.
+		 */
+		setscl(adap, 0 );
+		udelay(adap->udelay);
+	}
+	sdahi(adap);
+	if (sclhi(adap)<0){ /* timeout */
+	    DEB2(printk(KERN_DEBUG " i2c_outb: 0x%02x, timeout at ack\n", c&0xff));
+	    return -ETIMEDOUT;
+	};
+	/* read ack: SDA should be pulled down by slave */
+	ack=getsda(adap);	/* ack: sda is pulled low ->success.	 */
+	DEB2(printk(KERN_DEBUG " i2c_outb: 0x%02x , getsda() = %d\n", c & 0xff, ack));
+
+	DEBPROTO( printk(KERN_DEBUG "[%2.2x]",c&0xff) );
+	DEBPROTO(if (0==ack){ printk(KERN_DEBUG " A ");} else printk(KERN_DEBUG " NA ") );
+	scllo(adap);
+	return 0==ack;		/* return 1 if device acked	 */
+	/* assert: scl is low (sda undef) */
+}
+
+
+static int i2c_inb(struct i2c_adapter *i2c_adap) 
+{
+	/* read byte via i2c port, without start/stop sequence	*/
+	/* acknowledge is sent in i2c_read.			*/
+	int i;
+	unsigned char indata=0;
+	struct i2c_algo_bit_data *adap = i2c_adap->algo_data;
+
+	/* assert: scl is low */
+	sdahi(adap);
+	for (i=0;i<8;i++) {
+		if (sclhi(adap)<0) { /* timeout */
+			DEB2(printk(KERN_DEBUG " i2c_inb: timeout at bit #%d\n", 7-i));
+			return -ETIMEDOUT;
+		};
+		indata *= 2;
+		if ( getsda(adap) ) 
+			indata |= 0x01;
+		scllo(adap);
+	}
+	/* assert: scl is low */
+	DEB2(printk(KERN_DEBUG "i2c_inb: 0x%02x\n", indata & 0xff));
+
+	DEBPROTO(printk(KERN_DEBUG " 0x%02x", indata & 0xff));
+	return (int) (indata & 0xff);
+}
+
+/*
+ * Sanity check for the adapter hardware - check the reaction of
+ * the bus lines only if it seems to be idle.
+ */
+static int test_bus(struct i2c_algo_bit_data *adap, char* name) {
+	int scl,sda;
+
+	if (adap->getscl==NULL)
+		printk(KERN_INFO "i2c-algo-bit.o: Testing SDA only, "
+			"SCL is not readable.\n");
+
+	sda=getsda(adap);
+	scl=(adap->getscl==NULL?1:getscl(adap));
+	printk(KERN_DEBUG "i2c-algo-bit.o: (0) scl=%d, sda=%d\n",scl,sda);
+	if (!scl || !sda ) {
+		printk(KERN_WARNING "i2c-algo-bit.o: %s seems to be busy.\n", name);
+		goto bailout;
+	}
+
+	sdalo(adap);
+	sda=getsda(adap);
+	scl=(adap->getscl==NULL?1:getscl(adap));
+	printk(KERN_DEBUG "i2c-algo-bit.o: (1) scl=%d, sda=%d\n",scl,sda);
+	if ( 0 != sda ) {
+		printk(KERN_WARNING "i2c-algo-bit.o: SDA stuck high!\n");
+		goto bailout;
+	}
+	if ( 0 == scl ) {
+		printk(KERN_WARNING "i2c-algo-bit.o: SCL unexpected low "
+			"while pulling SDA low!\n");
+		goto bailout;
+	}		
+
+	sdahi(adap);
+	sda=getsda(adap);
+	scl=(adap->getscl==NULL?1:getscl(adap));
+	printk(KERN_DEBUG "i2c-algo-bit.o: (2) scl=%d, sda=%d\n",scl,sda);
+	if ( 0 == sda ) {
+		printk(KERN_WARNING "i2c-algo-bit.o: SDA stuck low!\n");
+		goto bailout;
+	}
+	if ( 0 == scl ) {
+		printk(KERN_WARNING "i2c-algo-bit.o: SCL unexpected low "
+			"while pulling SDA high!\n");
+		goto bailout;
+	}
+
+	scllo(adap);
+	sda=getsda(adap);
+	scl=(adap->getscl==NULL?0:getscl(adap));
+	printk(KERN_DEBUG "i2c-algo-bit.o: (3) scl=%d, sda=%d\n",scl,sda);
+	if ( 0 != scl ) {
+		printk(KERN_WARNING "i2c-algo-bit.o: SCL stuck high!\n");
+		goto bailout;
+	}
+	if ( 0 == sda ) {
+		printk(KERN_WARNING "i2c-algo-bit.o: SDA unexpected low "
+			"while pulling SCL low!\n");
+		goto bailout;
+	}
+	
+	sclhi(adap);
+	sda=getsda(adap);
+	scl=(adap->getscl==NULL?1:getscl(adap));
+	printk(KERN_DEBUG "i2c-algo-bit.o: (4) scl=%d, sda=%d\n",scl,sda);
+	if ( 0 == scl ) {
+		printk(KERN_WARNING "i2c-algo-bit.o: SCL stuck low!\n");
+		goto bailout;
+	}
+	if ( 0 == sda ) {
+		printk(KERN_WARNING "i2c-algo-bit.o: SDA unexpected low "
+			"while pulling SCL high!\n");
+		goto bailout;
+	}
+	printk(KERN_INFO "i2c-algo-bit.o: %s passed test.\n",name);
+	return 0;
+bailout:
+	sdahi(adap);
+	sclhi(adap);
+	return -ENODEV;
+}
+
+/* ----- Utility functions
+ */
+
+/* try_address tries to contact a chip for a number of
+ * times before it gives up.
+ * return values:
+ * 1 chip answered
+ * 0 chip did not answer
+ * -x transmission error
+ */
+static inline int try_address(struct i2c_adapter *i2c_adap,
+		       unsigned char addr, int retries)
+{
+	struct i2c_algo_bit_data *adap = i2c_adap->algo_data;
+	int i,ret = -1;
+	for (i=0;i<=retries;i++) {
+		ret = i2c_outb(i2c_adap,addr);
+		if (ret==1)
+			break;	/* success! */
+		i2c_stop(adap);
+		udelay(5/*adap->udelay*/);
+		if (i==retries)  /* no success */
+			break;
+		i2c_start(adap);
+		udelay(adap->udelay);
+	}
+	DEB2(if (i)
+	     printk(KERN_DEBUG "i2c-algo-bit.o: Used %d tries to %s client at 0x%02x : %s\n",
+		    i+1, addr & 1 ? "read" : "write", addr>>1,
+		    ret==1 ? "success" : ret==0 ? "no ack" : "failed, timeout?" )
+	    );
+	return ret;
+}
+
+static int sendbytes(struct i2c_adapter *i2c_adap, struct i2c_msg *msg)
+{
+	struct i2c_algo_bit_data *adap = i2c_adap->algo_data;
+	char c;
+	const char *temp = msg->buf;
+	int count = msg->len;
+	unsigned short nak_ok = msg->flags & I2C_M_IGNORE_NAK; 
+	int retval;
+	int wrcount=0;
+
+	while (count > 0) {
+		c = *temp;
+		DEB2(dev_dbg(&i2c_adap->dev, "sendbytes: writing %2.2X\n", c&0xff));
+		retval = i2c_outb(i2c_adap,c);
+		if ((retval>0) || (nak_ok && (retval==0)))  { /* ok or ignored NAK */
+			count--; 
+			temp++;
+			wrcount++;
+		} else { /* arbitration or no acknowledge */
+			dev_err(&i2c_adap->dev, "sendbytes: error - bailout.\n");
+			i2c_stop(adap);
+			return (retval<0)? retval : -EFAULT;
+			        /* got a better one ?? */
+		}
+#if 0
+		/* from asm/delay.h */
+		__delay(adap->mdelay * (loops_per_sec / 1000) );
+#endif
+	}
+	return wrcount;
+}
+
+static inline int readbytes(struct i2c_adapter *i2c_adap, struct i2c_msg *msg)
+{
+	int inval;
+	int rdcount=0;   	/* counts bytes read */
+	struct i2c_algo_bit_data *adap = i2c_adap->algo_data;
+	char *temp = msg->buf;
+	int count = msg->len;
+
+	while (count > 0) {
+		inval = i2c_inb(i2c_adap);
+/*printk("%#02x ",inval); if ( ! (count % 16) ) printk("\n"); */
+		if (inval>=0) {
+			*temp = inval;
+			rdcount++;
+		} else {   /* read timed out */
+			printk(KERN_ERR "i2c-algo-bit.o: readbytes: i2c_inb timed out.\n");
+			break;
+		}
+
+		temp++;
+		count--;
+
+		if (msg->flags & I2C_M_NO_RD_ACK)
+			continue;
+
+		if ( count > 0 ) {		/* send ack */
+			sdalo(adap);
+			DEBPROTO(printk(" Am "));
+		} else {
+			sdahi(adap);	/* neg. ack on last byte */
+			DEBPROTO(printk(" NAm "));
+		}
+		if (sclhi(adap)<0) {	/* timeout */
+			sdahi(adap);
+			printk(KERN_ERR "i2c-algo-bit.o: readbytes: Timeout at ack\n");
+			return -ETIMEDOUT;
+		};
+		scllo(adap);
+		sdahi(adap);
+	}
+	return rdcount;
+}
+
+/* doAddress initiates the transfer by generating the start condition (in
+ * try_address) and transmits the address in the necessary format to handle
+ * reads, writes as well as 10bit-addresses.
+ * returns:
+ *  0 everything went okay, the chip ack'ed, or IGNORE_NAK flag was set
+ * -x an error occurred (like: -EREMOTEIO if the device did not answer, or
+ *	-ETIMEDOUT, for example if the lines are stuck...) 
+ */
+static inline int bit_doAddress(struct i2c_adapter *i2c_adap, struct i2c_msg *msg) 
+{
+	unsigned short flags = msg->flags;
+	unsigned short nak_ok = msg->flags & I2C_M_IGNORE_NAK;
+	struct i2c_algo_bit_data *adap = i2c_adap->algo_data;
+
+	unsigned char addr;
+	int ret, retries;
+
+	retries = nak_ok ? 0 : i2c_adap->retries;
+	
+	if ( (flags & I2C_M_TEN)  ) { 
+		/* a ten bit address */
+		addr = 0xf0 | (( msg->addr >> 7) & 0x03);
+		DEB2(printk(KERN_DEBUG "addr0: %d\n",addr));
+		/* try extended address code...*/
+		ret = try_address(i2c_adap, addr, retries);
+		if ((ret != 1) && !nak_ok)  {
+			printk(KERN_ERR "died at extended address code.\n");
+			return -EREMOTEIO;
+		}
+		/* the remaining 8 bit address */
+		ret = i2c_outb(i2c_adap,msg->addr & 0x7f);
+		if ((ret != 1) && !nak_ok) {
+			/* the chip did not ack / xmission error occurred */
+			printk(KERN_ERR "died at 2nd address code.\n");
+			return -EREMOTEIO;
+		}
+		if ( flags & I2C_M_RD ) {
+			i2c_repstart(adap);
+			/* okay, now switch into reading mode */
+			addr |= 0x01;
+			ret = try_address(i2c_adap, addr, retries);
+			if ((ret!=1) && !nak_ok) {
+				printk(KERN_ERR "died at extended address code.\n");
+				return -EREMOTEIO;
+			}
+		}
+	} else {		/* normal 7bit address	*/
+		addr = ( msg->addr << 1 );
+		if (flags & I2C_M_RD )
+			addr |= 1;
+		if (flags & I2C_M_REV_DIR_ADDR )
+			addr ^= 1;
+		ret = try_address(i2c_adap, addr, retries);
+		if ((ret!=1) && !nak_ok)
+			return -EREMOTEIO;
+	}
+
+	return 0;
+}
+
+static int bit_xfer(struct i2c_adapter *i2c_adap,
+		    struct i2c_msg msgs[], int num)
+{
+	struct i2c_msg *pmsg;
+	struct i2c_algo_bit_data *adap = i2c_adap->algo_data;
+	
+	int i,ret;
+	unsigned short nak_ok;
+
+	i2c_start(adap);
+	for (i=0;i<num;i++) {
+		pmsg = &msgs[i];
+		nak_ok = pmsg->flags & I2C_M_IGNORE_NAK; 
+		if (!(pmsg->flags & I2C_M_NOSTART)) {
+			if (i) {
+				i2c_repstart(adap);
+			}
+			ret = bit_doAddress(i2c_adap, pmsg);
+			if ((ret != 0) && !nak_ok) {
+			    DEB2(printk(KERN_DEBUG "i2c-algo-bit.o: NAK from device addr %2.2x msg #%d\n"
+					,msgs[i].addr,i));
+			    return (ret<0) ? ret : -EREMOTEIO;
+			}
+		}
+		if (pmsg->flags & I2C_M_RD ) {
+			/* read bytes into buffer*/
+			ret = readbytes(i2c_adap, pmsg);
+			DEB2(printk(KERN_DEBUG "i2c-algo-bit.o: read %d bytes.\n",ret));
+			if (ret < pmsg->len ) {
+				return (ret<0)? ret : -EREMOTEIO;
+			}
+		} else {
+			/* write bytes from buffer */
+			ret = sendbytes(i2c_adap, pmsg);
+			DEB2(printk(KERN_DEBUG "i2c-algo-bit.o: wrote %d bytes.\n",ret));
+			if (ret < pmsg->len ) {
+				return (ret<0) ? ret : -EREMOTEIO;
+			}
+		}
+	}
+	i2c_stop(adap);
+	return num;
+}
+
+static u32 bit_func(struct i2c_adapter *adap)
+{
+	return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL | 
+	       I2C_FUNC_10BIT_ADDR | I2C_FUNC_PROTOCOL_MANGLING;
+}
+
+
+/* -----exported algorithm data: -------------------------------------	*/
+
+static struct i2c_algorithm i2c_bit_algo = {
+	.name		= "Bit-shift algorithm",
+	.id		= I2C_ALGO_BIT,
+	.master_xfer	= bit_xfer,
+	.functionality	= bit_func,
+};
+
+/* 
+ * registering functions to load algorithms at runtime 
+ */
+int i2c_bit_add_bus(struct i2c_adapter *adap)
+{
+	struct i2c_algo_bit_data *bit_adap = adap->algo_data;
+
+	if (bit_test) {
+		int ret = test_bus(bit_adap, adap->name);
+		if (ret<0)
+			return -ENODEV;
+	}
+
+	DEB2(dev_dbg(&adap->dev, "hw routines registered.\n"));
+
+	/* register new adapter to i2c module... */
+
+	adap->id |= i2c_bit_algo.id;
+	adap->algo = &i2c_bit_algo;
+
+	adap->timeout = 100;	/* default values, should	*/
+	adap->retries = 3;	/* be replaced by defines	*/
+
+	i2c_add_adapter(adap);
+	return 0;
+}
+
+
+int i2c_bit_del_bus(struct i2c_adapter *adap)
+{
+	return i2c_del_adapter(adap);
+}
+
+EXPORT_SYMBOL(i2c_bit_add_bus);
+EXPORT_SYMBOL(i2c_bit_del_bus);
+
+MODULE_AUTHOR("Simon G. Vogl <simon@tk.uni-linz.ac.at>");
+MODULE_DESCRIPTION("I2C-Bus bit-banging algorithm");
+MODULE_LICENSE("GPL");
+
+module_param(bit_test, bool, 0);
+module_param(i2c_debug, int, S_IRUGO | S_IWUSR);
+
+MODULE_PARM_DESC(bit_test, "Test the lines of the bus to see if it is stuck");
+MODULE_PARM_DESC(i2c_debug,
+		 "debug level - 0 off; 1 normal; 2,3 more verbose; 9 bit-protocol");
diff --git a/drivers/i2c/algos/i2c-algo-ite.c b/drivers/i2c/algos/i2c-algo-ite.c
new file mode 100644
index 00000000000..68e9e6832ca
--- /dev/null
+++ b/drivers/i2c/algos/i2c-algo-ite.c
@@ -0,0 +1,812 @@
+/*
+   -------------------------------------------------------------------------
+   i2c-algo-ite.c i2c driver algorithms for ITE adapters	    
+   
+   Hai-Pao Fan, MontaVista Software, Inc.
+   hpfan@mvista.com or source@mvista.com
+
+   Copyright 2000 MontaVista Software Inc.
+
+   ---------------------------------------------------------------------------
+   This file was highly leveraged from i2c-algo-pcf.c, which was created
+   by Simon G. Vogl and Hans Berglund:
+
+
+     Copyright (C) 1995-1997 Simon G. Vogl
+                   1998-2000 Hans Berglund
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.		     */
+/* ------------------------------------------------------------------------- */
+
+/* With some changes from Kyösti Mälkki <kmalkki@cc.hut.fi> and 
+   Frodo Looijaard <frodol@dds.nl> ,and also from Martin Bailey
+   <mbailey@littlefeet-inc.com> */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <asm/uaccess.h>
+#include <linux/ioport.h>
+#include <linux/errno.h>
+#include <linux/sched.h>
+
+#include <linux/i2c.h>
+#include <linux/i2c-algo-ite.h>
+#include "i2c-algo-ite.h"
+
+#define	PM_DSR		IT8172_PCI_IO_BASE + IT_PM_DSR
+#define	PM_IBSR		IT8172_PCI_IO_BASE + IT_PM_DSR + 0x04 
+#define GPIO_CCR	IT8172_PCI_IO_BASE + IT_GPCCR
+
+#define DEB2(x) if (i2c_debug>=2) x
+#define DEB3(x) if (i2c_debug>=3) x /* print several statistical values*/
+#define DEF_TIMEOUT 16
+
+
+/* module parameters:
+ */
+static int i2c_debug;
+static int iic_test;	/* see if the line-setting functions work	*/
+
+/* --- setting states on the bus with the right timing: ---------------	*/
+
+#define get_clock(adap) adap->getclock(adap->data)
+#define iic_outw(adap, reg, val) adap->setiic(adap->data, reg, val)
+#define iic_inw(adap, reg) adap->getiic(adap->data, reg)
+
+
+/* --- other auxiliary functions --------------------------------------	*/
+
+static void iic_start(struct i2c_algo_iic_data *adap)
+{
+	iic_outw(adap,ITE_I2CHCR,ITE_CMD);
+}
+
+static void iic_stop(struct i2c_algo_iic_data *adap)
+{
+	iic_outw(adap,ITE_I2CHCR,0);
+	iic_outw(adap,ITE_I2CHSR,ITE_I2CHSR_TDI);
+}
+
+static void iic_reset(struct i2c_algo_iic_data *adap)
+{
+	iic_outw(adap, PM_IBSR, iic_inw(adap, PM_IBSR) | 0x80);
+}
+
+
+static int wait_for_bb(struct i2c_algo_iic_data *adap)
+{
+	int timeout = DEF_TIMEOUT;
+	short status;
+
+	status = iic_inw(adap, ITE_I2CHSR);
+#ifndef STUB_I2C
+	while (timeout-- && (status & ITE_I2CHSR_HB)) {
+		udelay(1000); /* How much is this? */
+		status = iic_inw(adap, ITE_I2CHSR);
+	}
+#endif
+	if (timeout<=0) {
+		printk(KERN_ERR "Timeout, host is busy\n");
+		iic_reset(adap);
+	}
+	return(timeout<=0);
+}
+
+/* After we issue a transaction on the IIC bus, this function
+ * is called.  It puts this process to sleep until we get an interrupt from
+ * from the controller telling us that the transaction we requested in complete.
+ */
+static int wait_for_pin(struct i2c_algo_iic_data *adap, short *status) {
+
+	int timeout = DEF_TIMEOUT;
+	
+	timeout = wait_for_bb(adap);
+	if (timeout) {
+  		DEB2(printk("Timeout waiting for host not busy\n");)
+  		return -EIO;
+	}                           
+	timeout = DEF_TIMEOUT;
+
+	*status = iic_inw(adap, ITE_I2CHSR);
+#ifndef STUB_I2C
+	while (timeout-- && !(*status & ITE_I2CHSR_TDI)) {
+	   adap->waitforpin();
+	   *status = iic_inw(adap, ITE_I2CHSR);
+	}
+#endif
+	if (timeout <= 0)
+		return(-1);
+	else
+		return(0);
+}
+
+static int wait_for_fe(struct i2c_algo_iic_data *adap, short *status)
+{
+	int timeout = DEF_TIMEOUT;
+
+	*status = iic_inw(adap, ITE_I2CFSR);
+#ifndef STUB_I2C 
+	while (timeout-- && (*status & ITE_I2CFSR_FE)) {
+		udelay(1000);
+		iic_inw(adap, ITE_I2CFSR);
+	}
+#endif
+	if (timeout <= 0) 
+		return(-1);
+	else
+		return(0);
+}
+
+static int iic_init (struct i2c_algo_iic_data *adap)
+{
+	short i;
+
+	/* Clear bit 7 to set I2C to normal operation mode */
+	i=iic_inw(adap, PM_DSR)& 0xff7f;
+	iic_outw(adap, PM_DSR, i);
+
+	/* set IT_GPCCR port C bit 2&3 as function 2 */
+	i = iic_inw(adap, GPIO_CCR) & 0xfc0f;
+	iic_outw(adap,GPIO_CCR,i);
+
+	/* Clear slave address/sub-address */
+	iic_outw(adap,ITE_I2CSAR, 0);
+	iic_outw(adap,ITE_I2CSSAR, 0);
+
+	/* Set clock counter register */
+	iic_outw(adap,ITE_I2CCKCNT, get_clock(adap));
+
+	/* Set START/reSTART/STOP time registers */
+	iic_outw(adap,ITE_I2CSHDR, 0x0a);
+	iic_outw(adap,ITE_I2CRSUR, 0x0a);
+	iic_outw(adap,ITE_I2CPSUR, 0x0a);
+
+	/* Enable interrupts on completing the current transaction */
+	iic_outw(adap,ITE_I2CHCR, ITE_I2CHCR_IE | ITE_I2CHCR_HCE);
+
+	/* Clear transfer count */
+	iic_outw(adap,ITE_I2CFBCR, 0x0);
+
+	DEB2(printk("iic_init: Initialized IIC on ITE 0x%x\n",
+		iic_inw(adap, ITE_I2CHSR)));
+	return 0;
+}
+
+
+/*
+ * Sanity check for the adapter hardware - check the reaction of
+ * the bus lines only if it seems to be idle.
+ */
+static int test_bus(struct i2c_algo_iic_data *adap, char *name) {
+#if 0
+	int scl,sda;
+	sda=getsda(adap);
+	if (adap->getscl==NULL) {
+		printk("test_bus: Warning: Adapter can't read from clock line - skipping test.\n");
+		return 0;		
+	}
+	scl=getscl(adap);
+	printk("test_bus: Adapter: %s scl: %d  sda: %d -- testing...\n",
+	name,getscl(adap),getsda(adap));
+	if (!scl || !sda ) {
+		printk("test_bus: %s seems to be busy.\n",adap->name);
+		goto bailout;
+	}
+	sdalo(adap);
+	printk("test_bus:1 scl: %d  sda: %d \n",getscl(adap),
+	       getsda(adap));
+	if ( 0 != getsda(adap) ) {
+		printk("test_bus: %s SDA stuck high!\n",name);
+		sdahi(adap);
+		goto bailout;
+	}
+	if ( 0 == getscl(adap) ) {
+		printk("test_bus: %s SCL unexpected low while pulling SDA low!\n",
+			name);
+		goto bailout;
+	}		
+	sdahi(adap);
+	printk("test_bus:2 scl: %d  sda: %d \n",getscl(adap),
+	       getsda(adap));
+	if ( 0 == getsda(adap) ) {
+		printk("test_bus: %s SDA stuck low!\n",name);
+		sdahi(adap);
+		goto bailout;
+	}
+	if ( 0 == getscl(adap) ) {
+		printk("test_bus: %s SCL unexpected low while SDA high!\n",
+		       adap->name);
+	goto bailout;
+	}
+	scllo(adap);
+	printk("test_bus:3 scl: %d  sda: %d \n",getscl(adap),
+	       getsda(adap));
+	if ( 0 != getscl(adap) ) {
+
+		sclhi(adap);
+		goto bailout;
+	}
+	if ( 0 == getsda(adap) ) {
+		printk("test_bus: %s SDA unexpected low while pulling SCL low!\n",
+			name);
+		goto bailout;
+	}
+	sclhi(adap);
+	printk("test_bus:4 scl: %d  sda: %d \n",getscl(adap),
+	       getsda(adap));
+	if ( 0 == getscl(adap) ) {
+		printk("test_bus: %s SCL stuck low!\n",name);
+		sclhi(adap);
+		goto bailout;
+	}
+	if ( 0 == getsda(adap) ) {
+		printk("test_bus: %s SDA unexpected low while SCL high!\n",
+			name);
+		goto bailout;
+	}
+	printk("test_bus: %s passed test.\n",name);
+	return 0;
+bailout:
+	sdahi(adap);
+	sclhi(adap);
+	return -ENODEV;
+#endif
+	return (0);
+}
+
+/* ----- Utility functions
+ */
+
+
+/* Verify the device we want to talk to on the IIC bus really exists. */
+static inline int try_address(struct i2c_algo_iic_data *adap,
+		       unsigned int addr, int retries)
+{
+	int i, ret = -1;
+	short status;
+
+	for (i=0;i<retries;i++) {
+		iic_outw(adap, ITE_I2CSAR, addr);
+		iic_start(adap);
+		if (wait_for_pin(adap, &status) == 0) {
+			if ((status & ITE_I2CHSR_DNE) == 0) { 
+				iic_stop(adap);
+				iic_outw(adap, ITE_I2CFCR, ITE_I2CFCR_FLUSH);
+				ret=1;
+				break;	/* success! */
+			}
+		}
+		iic_stop(adap);
+		udelay(adap->udelay);
+	}
+	DEB2(if (i) printk("try_address: needed %d retries for 0x%x\n",i,
+	                   addr));
+	return ret;
+}
+
+
+static int iic_sendbytes(struct i2c_adapter *i2c_adap,const char *buf,
+                         int count)
+{
+	struct i2c_algo_iic_data *adap = i2c_adap->algo_data;
+	int wrcount=0, timeout;
+	short status;
+	int loops, remainder, i, j;
+	union {
+		char byte[2];
+		unsigned short word;
+	} tmp;
+   
+	iic_outw(adap, ITE_I2CSSAR, (unsigned short)buf[wrcount++]);
+	count--;
+	if (count == 0)
+		return -EIO;
+
+	loops =  count / 32;		/* 32-byte FIFO */
+	remainder = count % 32;
+
+	if(loops) {
+		for(i=0; i<loops; i++) {
+
+			iic_outw(adap, ITE_I2CFBCR, 32);
+			for(j=0; j<32/2; j++) {
+				tmp.byte[1] = buf[wrcount++];
+				tmp.byte[0] = buf[wrcount++];
+				iic_outw(adap, ITE_I2CFDR, tmp.word); 
+			}
+
+			/* status FIFO overrun */
+			iic_inw(adap, ITE_I2CFSR);
+			iic_inw(adap, ITE_I2CFBCR);
+
+			iic_outw(adap, ITE_I2CHCR, ITE_WRITE);	/* Issue WRITE command */
+
+			/* Wait for transmission to complete */
+			timeout = wait_for_pin(adap, &status);
+			if(timeout) {
+				iic_stop(adap);
+				printk("iic_sendbytes: %s write timeout.\n", i2c_adap->name);
+				return -EREMOTEIO; /* got a better one ?? */
+     	}
+			if (status & ITE_I2CHSR_DB) {
+				iic_stop(adap);
+				printk("iic_sendbytes: %s write error - no ack.\n", i2c_adap->name);
+				return -EREMOTEIO; /* got a better one ?? */
+			}
+		}
+	}
+	if(remainder) {
+		iic_outw(adap, ITE_I2CFBCR, remainder);
+		for(i=0; i<remainder/2; i++) {
+			tmp.byte[1] = buf[wrcount++];
+			tmp.byte[0] = buf[wrcount++];
+			iic_outw(adap, ITE_I2CFDR, tmp.word);
+		}
+
+		/* status FIFO overrun */
+		iic_inw(adap, ITE_I2CFSR);
+		iic_inw(adap, ITE_I2CFBCR);
+
+		iic_outw(adap, ITE_I2CHCR, ITE_WRITE);  /* Issue WRITE command */
+
+		timeout = wait_for_pin(adap, &status);
+		if(timeout) {
+			iic_stop(adap);
+			printk("iic_sendbytes: %s write timeout.\n", i2c_adap->name);
+			return -EREMOTEIO; /* got a better one ?? */
+		}
+#ifndef STUB_I2C
+		if (status & ITE_I2CHSR_DB) { 
+			iic_stop(adap);
+			printk("iic_sendbytes: %s write error - no ack.\n", i2c_adap->name);
+			return -EREMOTEIO; /* got a better one ?? */
+		}
+#endif
+	}
+	iic_stop(adap);
+	return wrcount;
+}
+
+
+static int iic_readbytes(struct i2c_adapter *i2c_adap, char *buf, int count,
+	int sread)
+{
+	int rdcount=0, i, timeout;
+	short status;
+	struct i2c_algo_iic_data *adap = i2c_adap->algo_data;
+	int loops, remainder, j;
+	union {
+		char byte[2];
+		unsigned short word;
+	} tmp;
+		
+	loops = count / 32;				/* 32-byte FIFO */
+	remainder = count % 32;
+
+	if(loops) {
+		for(i=0; i<loops; i++) {
+			iic_outw(adap, ITE_I2CFBCR, 32);
+			if (sread)
+				iic_outw(adap, ITE_I2CHCR, ITE_SREAD);
+			else
+				iic_outw(adap, ITE_I2CHCR, ITE_READ);		/* Issue READ command */
+
+			timeout = wait_for_pin(adap, &status);
+			if(timeout) {
+				iic_stop(adap);
+				printk("iic_readbytes:  %s read timeout.\n", i2c_adap->name);
+				return (-1);
+			}
+#ifndef STUB_I2C
+			if (status & ITE_I2CHSR_DB) {
+				iic_stop(adap);
+				printk("iic_readbytes: %s read error - no ack.\n", i2c_adap->name);
+				return (-1);
+			}
+#endif
+
+			timeout = wait_for_fe(adap, &status);
+			if(timeout) {
+				iic_stop(adap);
+				printk("iic_readbytes:  %s FIFO is empty\n", i2c_adap->name);
+				return (-1); 
+			}
+
+			for(j=0; j<32/2; j++) {
+				tmp.word = iic_inw(adap, ITE_I2CFDR);
+				buf[rdcount++] = tmp.byte[1];
+				buf[rdcount++] = tmp.byte[0];
+			}
+
+			/* status FIFO underrun */
+			iic_inw(adap, ITE_I2CFSR);
+
+		}
+	}
+
+
+	if(remainder) {
+		remainder=(remainder+1)/2 * 2;
+		iic_outw(adap, ITE_I2CFBCR, remainder);
+		if (sread)
+			iic_outw(adap, ITE_I2CHCR, ITE_SREAD);
+		else
+		iic_outw(adap, ITE_I2CHCR, ITE_READ);		/* Issue READ command */
+
+		timeout = wait_for_pin(adap, &status);
+		if(timeout) {
+			iic_stop(adap);
+			printk("iic_readbytes:  %s read timeout.\n", i2c_adap->name);
+			return (-1);
+		}
+#ifndef STUB_I2C
+		if (status & ITE_I2CHSR_DB) {
+			iic_stop(adap);
+			printk("iic_readbytes: %s read error - no ack.\n", i2c_adap->name);
+			return (-1);
+		}
+#endif
+		timeout = wait_for_fe(adap, &status);
+		if(timeout) {
+			iic_stop(adap);
+			printk("iic_readbytes:  %s FIFO is empty\n", i2c_adap->name);
+			return (-1);
+		}         
+
+		for(i=0; i<(remainder+1)/2; i++) {
+			tmp.word = iic_inw(adap, ITE_I2CFDR);
+			buf[rdcount++] = tmp.byte[1];
+			buf[rdcount++] = tmp.byte[0];
+		}
+
+		/* status FIFO underrun */
+		iic_inw(adap, ITE_I2CFSR);
+
+	}
+
+	iic_stop(adap);
+	return rdcount;
+}
+
+
+/* This function implements combined transactions.  Combined
+ * transactions consist of combinations of reading and writing blocks of data.
+ * Each transfer (i.e. a read or a write) is separated by a repeated start
+ * condition.
+ */
+#if 0
+static int iic_combined_transaction(struct i2c_adapter *i2c_adap, struct i2c_msg *msgs, int num) 
+{
+   int i;
+   struct i2c_msg *pmsg;
+   int ret;
+
+   DEB2(printk("Beginning combined transaction\n"));
+
+   for(i=0; i<(num-1); i++) {
+      pmsg = &msgs[i];
+      if(pmsg->flags & I2C_M_RD) {
+         DEB2(printk("  This one is a read\n"));
+         ret = iic_readbytes(i2c_adap, pmsg->buf, pmsg->len, IIC_COMBINED_XFER);
+      }
+      else if(!(pmsg->flags & I2C_M_RD)) {
+         DEB2(printk("This one is a write\n"));
+         ret = iic_sendbytes(i2c_adap, pmsg->buf, pmsg->len, IIC_COMBINED_XFER);
+      }
+   }
+   /* Last read or write segment needs to be terminated with a stop */
+   pmsg = &msgs[i];
+
+   if(pmsg->flags & I2C_M_RD) {
+      DEB2(printk("Doing the last read\n"));
+      ret = iic_readbytes(i2c_adap, pmsg->buf, pmsg->len, IIC_SINGLE_XFER);
+   }
+   else if(!(pmsg->flags & I2C_M_RD)) {
+      DEB2(printk("Doing the last write\n"));
+      ret = iic_sendbytes(i2c_adap, pmsg->buf, pmsg->len, IIC_SINGLE_XFER);
+   }
+
+   return ret;
+}
+#endif
+
+
+/* Whenever we initiate a transaction, the first byte clocked
+ * onto the bus after the start condition is the address (7 bit) of the
+ * device we want to talk to.  This function manipulates the address specified
+ * so that it makes sense to the hardware when written to the IIC peripheral.
+ *
+ * Note: 10 bit addresses are not supported in this driver, although they are
+ * supported by the hardware.  This functionality needs to be implemented.
+ */
+static inline int iic_doAddress(struct i2c_algo_iic_data *adap,
+                                struct i2c_msg *msg, int retries) 
+{
+	unsigned short flags = msg->flags;
+	unsigned int addr;
+	int ret;
+
+/* Ten bit addresses not supported right now */
+	if ( (flags & I2C_M_TEN)  ) { 
+#if 0
+		addr = 0xf0 | (( msg->addr >> 7) & 0x03);
+		DEB2(printk("addr0: %d\n",addr));
+		ret = try_address(adap, addr, retries);
+		if (ret!=1) {
+			printk("iic_doAddress: died at extended address code.\n");
+			return -EREMOTEIO;
+		}
+		iic_outw(adap,msg->addr & 0x7f);
+		if (ret != 1) {
+			printk("iic_doAddress: died at 2nd address code.\n");
+			return -EREMOTEIO;
+		}
+		if ( flags & I2C_M_RD ) {
+			i2c_repstart(adap);
+			addr |= 0x01;
+			ret = try_address(adap, addr, retries);
+			if (ret!=1) {
+				printk("iic_doAddress: died at extended address code.\n");
+				return -EREMOTEIO;
+			}
+		}
+#endif
+	} else {
+
+		addr = ( msg->addr << 1 );
+
+#if 0
+		if (flags & I2C_M_RD )
+			addr |= 1;
+		if (flags & I2C_M_REV_DIR_ADDR )
+			addr ^= 1;
+#endif
+
+		if (iic_inw(adap, ITE_I2CSAR) != addr) {
+			iic_outw(adap, ITE_I2CSAR, addr);
+			ret = try_address(adap, addr, retries);
+			if (ret!=1) {
+				printk("iic_doAddress: died at address code.\n");
+				return -EREMOTEIO;
+			}
+		}
+
+  }
+
+	return 0;
+}
+
+
+/* Description: Prepares the controller for a transaction (clearing status
+ * registers, data buffers, etc), and then calls either iic_readbytes or
+ * iic_sendbytes to do the actual transaction.
+ *
+ * still to be done: Before we issue a transaction, we should
+ * verify that the bus is not busy or in some unknown state.
+ */
+static int iic_xfer(struct i2c_adapter *i2c_adap,
+		    struct i2c_msg *msgs, 
+		    int num)
+{
+	struct i2c_algo_iic_data *adap = i2c_adap->algo_data;
+	struct i2c_msg *pmsg;
+	int i = 0;
+	int ret, timeout;
+    
+	pmsg = &msgs[i];
+
+	if(!pmsg->len) {
+		DEB2(printk("iic_xfer: read/write length is 0\n");)
+		return -EIO;
+	}
+	if(!(pmsg->flags & I2C_M_RD) && (!(pmsg->len)%2) ) {
+		DEB2(printk("iic_xfer: write buffer length is not odd\n");)
+		return -EIO; 
+	}
+
+	/* Wait for any pending transfers to complete */
+	timeout = wait_for_bb(adap);
+	if (timeout) {
+		DEB2(printk("iic_xfer: Timeout waiting for host not busy\n");)
+		return -EIO;
+	}
+
+	/* Flush FIFO */
+	iic_outw(adap, ITE_I2CFCR, ITE_I2CFCR_FLUSH);
+
+	/* Load address */
+	ret = iic_doAddress(adap, pmsg, i2c_adap->retries);
+	if (ret)
+		return -EIO;
+
+#if 0
+	/* Combined transaction (read and write) */
+	if(num > 1) {
+           DEB2(printk("iic_xfer: Call combined transaction\n"));
+           ret = iic_combined_transaction(i2c_adap, msgs, num);
+  }
+#endif
+
+	DEB3(printk("iic_xfer: Msg %d, addr=0x%x, flags=0x%x, len=%d\n",
+		i, msgs[i].addr, msgs[i].flags, msgs[i].len);)
+
+	if(pmsg->flags & I2C_M_RD) 		/* Read */
+		ret = iic_readbytes(i2c_adap, pmsg->buf, pmsg->len, 0);
+	else {													/* Write */ 
+		udelay(1000);
+		ret = iic_sendbytes(i2c_adap, pmsg->buf, pmsg->len);
+	}
+
+	if (ret != pmsg->len)
+		DEB3(printk("iic_xfer: error or fail on read/write %d bytes.\n",ret)); 
+	else
+		DEB3(printk("iic_xfer: read/write %d bytes.\n",ret));
+
+	return ret;
+}
+
+
+/* Implements device specific ioctls.  Higher level ioctls can
+ * be found in i2c-core.c and are typical of any i2c controller (specifying
+ * slave address, timeouts, etc).  These ioctls take advantage of any hardware
+ * features built into the controller for which this algorithm-adapter set
+ * was written.  These ioctls allow you to take control of the data and clock
+ * lines and set the either high or low,
+ * similar to a GPIO pin.
+ */
+static int algo_control(struct i2c_adapter *adapter, 
+	unsigned int cmd, unsigned long arg)
+{
+
+  struct i2c_algo_iic_data *adap = adapter->algo_data;
+  struct i2c_iic_msg s_msg;
+  char *buf;
+	int ret;
+
+  if (cmd == I2C_SREAD) {
+		if(copy_from_user(&s_msg, (struct i2c_iic_msg *)arg, 
+				sizeof(struct i2c_iic_msg))) 
+			return -EFAULT;
+		buf = kmalloc(s_msg.len, GFP_KERNEL);
+		if (buf== NULL)
+			return -ENOMEM;
+
+		/* Flush FIFO */
+		iic_outw(adap, ITE_I2CFCR, ITE_I2CFCR_FLUSH);
+
+		/* Load address */
+		iic_outw(adap, ITE_I2CSAR,s_msg.addr<<1);
+		iic_outw(adap, ITE_I2CSSAR,s_msg.waddr & 0xff);
+
+		ret = iic_readbytes(adapter, buf, s_msg.len, 1);
+		if (ret>=0) {
+			if(copy_to_user( s_msg.buf, buf, s_msg.len) ) 
+				ret = -EFAULT;
+		}
+		kfree(buf);
+	}
+	return 0;
+}
+
+
+static u32 iic_func(struct i2c_adapter *adap)
+{
+	return I2C_FUNC_SMBUS_EMUL | I2C_FUNC_10BIT_ADDR | 
+	       I2C_FUNC_PROTOCOL_MANGLING; 
+}
+
+/* -----exported algorithm data: -------------------------------------	*/
+
+static struct i2c_algorithm iic_algo = {
+	.name		= "ITE IIC algorithm",
+	.id		= I2C_ALGO_IIC,
+	.master_xfer	= iic_xfer,
+	.algo_control	= algo_control, /* ioctl */
+	.functionality	= iic_func,
+};
+
+
+/* 
+ * registering functions to load algorithms at runtime 
+ */
+int i2c_iic_add_bus(struct i2c_adapter *adap)
+{
+	struct i2c_algo_iic_data *iic_adap = adap->algo_data;
+
+	if (iic_test) {
+		int ret = test_bus(iic_adap, adap->name);
+		if (ret<0)
+			return -ENODEV;
+	}
+
+	DEB2(printk("i2c-algo-ite: hw routines for %s registered.\n",
+	            adap->name));
+
+	/* register new adapter to i2c module... */
+
+	adap->id |= iic_algo.id;
+	adap->algo = &iic_algo;
+
+	adap->timeout = 100;	/* default values, should	*/
+	adap->retries = 3;		/* be replaced by defines	*/
+	adap->flags = 0;
+
+	i2c_add_adapter(adap);
+	iic_init(iic_adap);
+
+	return 0;
+}
+
+
+int i2c_iic_del_bus(struct i2c_adapter *adap)
+{
+	int res;
+	if ((res = i2c_del_adapter(adap)) < 0)
+		return res;
+	DEB2(printk("i2c-algo-ite: adapter unregistered: %s\n",adap->name));
+
+	return 0;
+}
+
+
+int __init i2c_algo_iic_init (void)
+{
+	printk(KERN_INFO "ITE iic (i2c) algorithm module\n");
+	return 0;
+}
+
+
+void i2c_algo_iic_exit(void)
+{
+	return;
+}
+
+
+EXPORT_SYMBOL(i2c_iic_add_bus);
+EXPORT_SYMBOL(i2c_iic_del_bus);
+
+/* The MODULE_* macros resolve to nothing if MODULES is not defined
+ * when this file is compiled.
+ */
+MODULE_AUTHOR("MontaVista Software <www.mvista.com>");
+MODULE_DESCRIPTION("ITE iic algorithm");
+MODULE_LICENSE("GPL");
+
+module_param(iic_test, bool, 0);
+module_param(i2c_debug, int, S_IRUGO | S_IWUSR);
+
+MODULE_PARM_DESC(iic_test, "Test if the I2C bus is available");
+MODULE_PARM_DESC(i2c_debug,
+        "debug level - 0 off; 1 normal; 2,3 more verbose; 9 iic-protocol");
+
+
+/* This function resolves to init_module (the function invoked when a module
+ * is loaded via insmod) when this file is compiled with MODULES defined.
+ * Otherwise (i.e. if you want this driver statically linked to the kernel),
+ * a pointer to this function is stored in a table and called
+ * during the initialization of the kernel (in do_basic_setup in /init/main.c) 
+ *
+ * All this functionality is complements of the macros defined in linux/init.h
+ */
+module_init(i2c_algo_iic_init);
+
+
+/* If MODULES is defined when this file is compiled, then this function will
+ * resolved to cleanup_module.
+ */
+module_exit(i2c_algo_iic_exit);
diff --git a/drivers/i2c/algos/i2c-algo-ite.h b/drivers/i2c/algos/i2c-algo-ite.h
new file mode 100644
index 00000000000..a8ca3c9b546
--- /dev/null
+++ b/drivers/i2c/algos/i2c-algo-ite.h
@@ -0,0 +1,117 @@
+/*
+   --------------------------------------------------------------------
+   i2c-ite.h: Global defines for the I2C controller on board the    
+                 ITE MIPS processor.                                
+   --------------------------------------------------------------------
+   Hai-Pao Fan, MontaVista Software, Inc.
+   hpfan@mvista.com or source@mvista.com
+
+   Copyright 2001 MontaVista Software Inc.
+
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+
+ */
+
+#ifndef I2C_ITE_H
+#define I2C_ITE_H 1
+
+#include <asm/it8172/it8172.h>
+
+/* I2C Registers */
+#define ITE_I2CHCR	IT8172_PCI_IO_BASE + IT_I2C_BASE + 0x30
+#define ITE_I2CHSR	IT8172_PCI_IO_BASE + IT_I2C_BASE + 0x34
+#define ITE_I2CSAR	IT8172_PCI_IO_BASE + IT_I2C_BASE + 0x38
+#define ITE_I2CSSAR	IT8172_PCI_IO_BASE + IT_I2C_BASE + 0x3c
+#define ITE_I2CCKCNT	IT8172_PCI_IO_BASE + IT_I2C_BASE + 0x48
+#define ITE_I2CSHDR	IT8172_PCI_IO_BASE + IT_I2C_BASE + 0x4c
+#define ITE_I2CRSUR	IT8172_PCI_IO_BASE + IT_I2C_BASE + 0x50
+#define ITE_I2CPSUR	IT8172_PCI_IO_BASE + IT_I2C_BASE + 0x54
+
+#define ITE_I2CFDR	IT8172_PCI_IO_BASE + IT_I2C_BASE + 0x70
+#define ITE_I2CFBCR	IT8172_PCI_IO_BASE + IT_I2C_BASE + 0x74
+#define ITE_I2CFCR	IT8172_PCI_IO_BASE + IT_I2C_BASE + 0x78
+#define ITE_I2CFSR	IT8172_PCI_IO_BASE + IT_I2C_BASE + 0x7c
+
+
+/* Host Control Register ITE_I2CHCR */
+#define	ITE_I2CHCR_HCE	0x01	/* Enable I2C Host Controller */
+#define	ITE_I2CHCR_IE	0x02	/* Enable the interrupt after completing
+				   the current transaction */
+#define ITE_I2CHCR_CP_W	0x00	/* bit2-4 000 - Write */
+#define	ITE_I2CHCR_CP_R	0x08	/*	  010 - Current address read */
+#define	ITE_I2CHCR_CP_S	0x10	/*	  100 - Sequential read */
+#define ITE_I2CHCR_ST	0x20	/* Initiates the I2C host controller to execute
+				   the command and send the data programmed in
+				   all required registers to I2C bus */
+#define ITE_CMD		ITE_I2CHCR_HCE | ITE_I2CHCR_IE | ITE_I2CHCR_ST
+#define ITE_WRITE	ITE_CMD | ITE_I2CHCR_CP_W
+#define ITE_READ	ITE_CMD | ITE_I2CHCR_CP_R
+#define ITE_SREAD	ITE_CMD | ITE_I2CHCR_CP_S
+
+/* Host Status Register ITE_I2CHSR */
+#define	ITE_I2CHSR_DB	0x01	/* Device is busy, receives NACK response except
+				   in the first and last bytes */
+#define	ITE_I2CHSR_DNE	0x02	/* Target address on I2C bus does not exist */
+#define	ITE_I2CHSR_TDI	0x04	/* R/W Transaction on I2C bus was completed */
+#define	ITE_I2CHSR_HB	0x08	/* Host controller is processing transactions */
+#define	ITE_I2CHSR_FER	0x10	/* Error occurs in the FIFO */
+
+/* Slave Address Register ITE_I2CSAR */
+#define	ITE_I2CSAR_SA_MASK	0xfe	/* Target I2C device address */
+#define	ITE_I2CSAR_ASO		0x0100	/* Output 1/0 to I2CAS port when the
+					   next slave address is addressed */
+
+/* Slave Sub-address Register ITE_I2CSSAR */
+#define	ITE_I2CSSAR_SUBA_MASK	0xff	/* Target I2C device sub-address */
+
+/* Clock Counter Register ITE_I2CCKCNT */
+#define	ITE_I2CCKCNT_STOP	0x00	/* stop I2C clock */
+#define	ITE_I2CCKCNT_HPCC_MASK	0x7f	/* SCL high period counter */
+#define	ITE_I2CCKCNT_LPCC_MASK	0x7f00	/* SCL low period counter */
+
+/* START Hold Time Register ITE_I2CSHDR */
+/* value is counted based on 16 MHz internal clock */
+#define ITE_I2CSHDR_FM	0x0a	/* START condition at fast mode */
+#define	ITE_I2CSHDR_SM	0x47	/* START contition at standard mode */
+
+/* (Repeated) START Setup Time Register ITE_I2CRSUR */
+/* value is counted based on 16 MHz internal clock */
+#define	ITE_I2CRSUR_FM	0x0a	/* repeated START condition at fast mode */
+#define	ITE_I2CRSUR_SM	0x50	/* repeated START condition at standard mode */
+
+/* STOP setup Time Register ITE_I2CPSUR */
+
+/* FIFO Data Register ITE_I2CFDR */
+#define	ITE_I2CFDR_MASK		0xff
+
+/* FIFO Byte Count Register ITE_I2CFBCR */
+#define ITE_I2CFBCR_MASK	0x3f
+
+/* FIFO Control Register ITE_I2CFCR */
+#define	ITE_I2CFCR_FLUSH	0x01	/* Flush FIFO and reset the FIFO point
+					   and I2CFSR */
+/* FIFO Status Register ITE_I2CFSR */
+#define	ITE_I2CFSR_FO	0x01	/* FIFO is overrun when write */
+#define	ITE_I2CFSR_FU	0x02	/* FIFO is underrun when read */
+#define	ITE_I2CFSR_FF	0x04	/* FIFO is full when write */
+#define	ITE_I2CFSR_FE	0x08	/* FIFO is empty when read */
+
+#endif  /* I2C_ITE_H */
diff --git a/drivers/i2c/algos/i2c-algo-pca.c b/drivers/i2c/algos/i2c-algo-pca.c
new file mode 100644
index 00000000000..c3d912cbbbc
--- /dev/null
+++ b/drivers/i2c/algos/i2c-algo-pca.c
@@ -0,0 +1,399 @@
+/*
+ *  i2c-algo-pca.c i2c driver algorithms for PCA9564 adapters                
+ *    Copyright (C) 2004 Arcom Control Systems
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/i2c.h>
+#include <linux/i2c-algo-pca.h>
+#include "i2c-algo-pca.h"
+
+#define DRIVER "i2c-algo-pca"
+
+#define DEB1(fmt, args...) do { if (i2c_debug>=1) printk(fmt, ## args); } while(0)
+#define DEB2(fmt, args...) do { if (i2c_debug>=2) printk(fmt, ## args); } while(0)
+#define DEB3(fmt, args...) do { if (i2c_debug>=3) printk(fmt, ## args); } while(0)
+
+static int i2c_debug=0;
+
+#define pca_outw(adap, reg, val) adap->write_byte(adap, reg, val)
+#define pca_inw(adap, reg) adap->read_byte(adap, reg)
+
+#define pca_status(adap) pca_inw(adap, I2C_PCA_STA)
+#define pca_clock(adap) adap->get_clock(adap)
+#define pca_own(adap) adap->get_own(adap)
+#define pca_set_con(adap, val) pca_outw(adap, I2C_PCA_CON, val)
+#define pca_get_con(adap) pca_inw(adap, I2C_PCA_CON)
+#define pca_wait(adap) adap->wait_for_interrupt(adap)
+
+/*
+ * Generate a start condition on the i2c bus.
+ *
+ * returns after the start condition has occured
+ */
+static void pca_start(struct i2c_algo_pca_data *adap)
+{
+	int sta = pca_get_con(adap);
+	DEB2("=== START\n");
+	sta |= I2C_PCA_CON_STA;
+	sta &= ~(I2C_PCA_CON_STO|I2C_PCA_CON_SI);
+	pca_set_con(adap, sta);
+	pca_wait(adap);
+}
+
+/*
+ * Generate a repeated start condition on the i2c bus 
+ *
+ * return after the repeated start condition has occured
+ */
+static void pca_repeated_start(struct i2c_algo_pca_data *adap)
+{
+	int sta = pca_get_con(adap);
+	DEB2("=== REPEATED START\n");
+	sta |= I2C_PCA_CON_STA;
+	sta &= ~(I2C_PCA_CON_STO|I2C_PCA_CON_SI);
+	pca_set_con(adap, sta);
+	pca_wait(adap);
+}
+
+/*
+ * Generate a stop condition on the i2c bus
+ *
+ * returns after the stop condition has been generated
+ *
+ * STOPs do not generate an interrupt or set the SI flag, since the
+ * part returns the the idle state (0xf8). Hence we don't need to
+ * pca_wait here.
+ */
+static void pca_stop(struct i2c_algo_pca_data *adap)
+{
+	int sta = pca_get_con(adap);
+	DEB2("=== STOP\n");
+	sta |= I2C_PCA_CON_STO;
+	sta &= ~(I2C_PCA_CON_STA|I2C_PCA_CON_SI);
+	pca_set_con(adap, sta);
+}
+
+/*
+ * Send the slave address and R/W bit
+ *
+ * returns after the address has been sent
+ */
+static void pca_address(struct i2c_algo_pca_data *adap, 
+			struct i2c_msg *msg)
+{
+	int sta = pca_get_con(adap);
+	int addr;
+
+	addr = ( (0x7f & msg->addr) << 1 );
+	if (msg->flags & I2C_M_RD )
+		addr |= 1;
+	DEB2("=== SLAVE ADDRESS %#04x+%c=%#04x\n", 
+	     msg->addr, msg->flags & I2C_M_RD ? 'R' : 'W', addr);
+	
+	pca_outw(adap, I2C_PCA_DAT, addr);
+
+	sta &= ~(I2C_PCA_CON_STO|I2C_PCA_CON_STA|I2C_PCA_CON_SI);
+	pca_set_con(adap, sta);
+
+	pca_wait(adap);
+}
+
+/*
+ * Transmit a byte.
+ *
+ * Returns after the byte has been transmitted
+ */
+static void pca_tx_byte(struct i2c_algo_pca_data *adap, 
+			__u8 b)
+{
+	int sta = pca_get_con(adap);
+	DEB2("=== WRITE %#04x\n", b);
+	pca_outw(adap, I2C_PCA_DAT, b);
+
+	sta &= ~(I2C_PCA_CON_STO|I2C_PCA_CON_STA|I2C_PCA_CON_SI);
+	pca_set_con(adap, sta);
+
+	pca_wait(adap);
+}
+
+/*
+ * Receive a byte
+ *
+ * returns immediately.
+ */
+static void pca_rx_byte(struct i2c_algo_pca_data *adap, 
+			__u8 *b, int ack)
+{
+	*b = pca_inw(adap, I2C_PCA_DAT);
+	DEB2("=== READ %#04x %s\n", *b, ack ? "ACK" : "NACK");
+}
+
+/* 
+ * Setup ACK or NACK for next received byte and wait for it to arrive.
+ *
+ * Returns after next byte has arrived.
+ */
+static void pca_rx_ack(struct i2c_algo_pca_data *adap, 
+		       int ack)
+{
+	int sta = pca_get_con(adap);
+
+	sta &= ~(I2C_PCA_CON_STO|I2C_PCA_CON_STA|I2C_PCA_CON_SI|I2C_PCA_CON_AA);
+
+	if ( ack )
+		sta |= I2C_PCA_CON_AA;
+
+	pca_set_con(adap, sta);
+	pca_wait(adap);
+}
+
+/* 
+ * Reset the i2c bus / SIO 
+ */
+static void pca_reset(struct i2c_algo_pca_data *adap)
+{
+	/* apparently only an external reset will do it. not a lot can be done */
+	printk(KERN_ERR DRIVER ": Haven't figured out how to do a reset yet\n");
+}
+
+static int pca_xfer(struct i2c_adapter *i2c_adap,
+                    struct i2c_msg *msgs,
+                    int num)
+{
+        struct i2c_algo_pca_data *adap = i2c_adap->algo_data;
+        struct i2c_msg *msg = NULL;
+        int curmsg;
+	int numbytes = 0;
+	int state;
+	int ret;
+
+	state = pca_status(adap);
+	if ( state != 0xF8 ) {
+		dev_dbg(&i2c_adap->dev, "bus is not idle. status is %#04x\n", state );
+		/* FIXME: what to do. Force stop ? */
+		return -EREMOTEIO;
+	}
+
+	DEB1("{{{ XFER %d messages\n", num);
+
+	if (i2c_debug>=2) {
+		for (curmsg = 0; curmsg < num; curmsg++) {
+			int addr, i;
+			msg = &msgs[curmsg];
+			
+			addr = (0x7f & msg->addr) ;
+		
+			if (msg->flags & I2C_M_RD )
+				printk(KERN_INFO "    [%02d] RD %d bytes from %#02x [%#02x, ...]\n", 
+				       curmsg, msg->len, addr, (addr<<1) | 1);
+			else {
+				printk(KERN_INFO "    [%02d] WR %d bytes to %#02x [%#02x%s", 
+				       curmsg, msg->len, addr, addr<<1,
+				       msg->len == 0 ? "" : ", ");
+				for(i=0; i < msg->len; i++)
+					printk("%#04x%s", msg->buf[i], i == msg->len - 1 ? "" : ", ");
+				printk("]\n");
+			}
+		}
+	}
+
+	curmsg = 0;
+	ret = -EREMOTEIO;
+	while (curmsg < num) {
+		state = pca_status(adap);
+
+		DEB3("STATE is 0x%02x\n", state);
+		msg = &msgs[curmsg];
+
+		switch (state) {
+		case 0xf8: /* On reset or stop the bus is idle */
+			pca_start(adap);
+			break;
+
+		case 0x08: /* A START condition has been transmitted */
+		case 0x10: /* A repeated start condition has been transmitted */
+			pca_address(adap, msg);
+			break;
+			
+		case 0x18: /* SLA+W has been transmitted; ACK has been received */
+		case 0x28: /* Data byte in I2CDAT has been transmitted; ACK has been received */
+			if (numbytes < msg->len) {
+				pca_tx_byte(adap, msg->buf[numbytes]);
+				numbytes++;
+				break;
+			}
+			curmsg++; numbytes = 0;
+			if (curmsg == num)
+				pca_stop(adap);
+			else
+				pca_repeated_start(adap);
+			break;
+
+		case 0x20: /* SLA+W has been transmitted; NOT ACK has been received */
+			DEB2("NOT ACK received after SLA+W\n");
+			pca_stop(adap);
+			goto out;
+
+		case 0x40: /* SLA+R has been transmitted; ACK has been received */
+			pca_rx_ack(adap, msg->len > 1);
+			break;
+
+		case 0x50: /* Data bytes has been received; ACK has been returned */
+			if (numbytes < msg->len) {
+				pca_rx_byte(adap, &msg->buf[numbytes], 1);
+				numbytes++;
+				pca_rx_ack(adap, numbytes < msg->len - 1);
+				break;
+			}
+			curmsg++; numbytes = 0;
+			if (curmsg == num)
+				pca_stop(adap);
+			else
+				pca_repeated_start(adap);
+			break;
+
+		case 0x48: /* SLA+R has been transmitted; NOT ACK has been received */
+			DEB2("NOT ACK received after SLA+R\n");
+			pca_stop(adap);
+			goto out;
+
+		case 0x30: /* Data byte in I2CDAT has been transmitted; NOT ACK has been received */
+			DEB2("NOT ACK received after data byte\n");
+			goto out;
+
+		case 0x38: /* Arbitration lost during SLA+W, SLA+R or data bytes */
+			DEB2("Arbitration lost\n");
+			goto out;
+			
+		case 0x58: /* Data byte has been received; NOT ACK has been returned */
+			if ( numbytes == msg->len - 1 ) {
+				pca_rx_byte(adap, &msg->buf[numbytes], 0);
+				curmsg++; numbytes = 0;
+				if (curmsg == num)
+					pca_stop(adap);
+				else
+					pca_repeated_start(adap);
+			} else {
+				DEB2("NOT ACK sent after data byte received. "
+				     "Not final byte. numbytes %d. len %d\n",
+				     numbytes, msg->len);
+				pca_stop(adap);
+				goto out;
+			}
+			break;
+		case 0x70: /* Bus error - SDA stuck low */
+			DEB2("BUS ERROR - SDA Stuck low\n");
+			pca_reset(adap);
+			goto out;
+		case 0x90: /* Bus error - SCL stuck low */
+			DEB2("BUS ERROR - SCL Stuck low\n");
+			pca_reset(adap);
+			goto out;
+		case 0x00: /* Bus error during master or slave mode due to illegal START or STOP condition */
+			DEB2("BUS ERROR - Illegal START or STOP\n");
+			pca_reset(adap);
+			goto out;
+		default:
+			printk(KERN_ERR DRIVER ": unhandled SIO state 0x%02x\n", state);
+			break;
+		}
+		
+	}
+
+	ret = curmsg;
+ out:
+	DEB1(KERN_CRIT "}}} transfered %d/%d messages. "
+	     "status is %#04x. control is %#04x\n", 
+	     curmsg, num, pca_status(adap),
+	     pca_get_con(adap));
+	return ret;
+}
+
+static u32 pca_func(struct i2c_adapter *adap)
+{
+        return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
+}
+
+static int pca_init(struct i2c_algo_pca_data *adap)
+{
+	static int freqs[] = {330,288,217,146,88,59,44,36};
+	int own, clock;
+
+	own = pca_own(adap);
+	clock = pca_clock(adap);
+	DEB1(KERN_INFO DRIVER ": own address is %#04x\n", own);
+	DEB1(KERN_INFO DRIVER ": clock freqeuncy is %dkHz\n", freqs[clock]);
+
+	pca_outw(adap, I2C_PCA_ADR, own << 1);
+
+	pca_set_con(adap, I2C_PCA_CON_ENSIO | clock);
+	udelay(500); /* 500 µs for oscilator to stabilise */
+
+	return 0;
+}
+
+static struct i2c_algorithm pca_algo = {
+	.name		= "PCA9564 algorithm",
+	.id		= I2C_ALGO_PCA,
+	.master_xfer	= pca_xfer,
+	.functionality	= pca_func,
+};
+
+/* 
+ * registering functions to load algorithms at runtime 
+ */
+int i2c_pca_add_bus(struct i2c_adapter *adap)
+{
+	struct i2c_algo_pca_data *pca_adap = adap->algo_data;
+	int rval;
+
+	/* register new adapter to i2c module... */
+
+	adap->id |= pca_algo.id;
+	adap->algo = &pca_algo;
+
+	adap->timeout = 100;		/* default values, should	*/
+	adap->retries = 3;		/* be replaced by defines	*/
+
+	rval = pca_init(pca_adap);
+
+	if (!rval)
+		i2c_add_adapter(adap);
+
+	return rval;
+}
+
+int i2c_pca_del_bus(struct i2c_adapter *adap)
+{
+	return i2c_del_adapter(adap);
+}
+
+EXPORT_SYMBOL(i2c_pca_add_bus);
+EXPORT_SYMBOL(i2c_pca_del_bus);
+
+MODULE_AUTHOR("Ian Campbell <icampbell@arcom.com>");
+MODULE_DESCRIPTION("I2C-Bus PCA9564 algorithm");
+MODULE_LICENSE("GPL");
+
+module_param(i2c_debug, int, 0);
diff --git a/drivers/i2c/algos/i2c-algo-pca.h b/drivers/i2c/algos/i2c-algo-pca.h
new file mode 100644
index 00000000000..2fee07e0521
--- /dev/null
+++ b/drivers/i2c/algos/i2c-algo-pca.h
@@ -0,0 +1,26 @@
+#ifndef I2C_PCA9564_H
+#define I2C_PCA9564_H 1
+
+#define I2C_PCA_STA		0x00 /* STATUS  Read Only  */
+#define I2C_PCA_TO		0x00 /* TIMEOUT Write Only */
+#define I2C_PCA_DAT		0x01 /* DATA    Read/Write */
+#define I2C_PCA_ADR		0x02 /* OWN ADR Read/Write */
+#define I2C_PCA_CON		0x03 /* CONTROL Read/Write */
+
+#define I2C_PCA_CON_AA		0x80 /* Assert Acknowledge */
+#define I2C_PCA_CON_ENSIO	0x40 /* Enable */
+#define I2C_PCA_CON_STA		0x20 /* Start */
+#define I2C_PCA_CON_STO		0x10 /* Stop */
+#define I2C_PCA_CON_SI		0x08 /* Serial Interrupt */
+#define I2C_PCA_CON_CR		0x07 /* Clock Rate (MASK) */
+
+#define I2C_PCA_CON_330kHz	0x00
+#define I2C_PCA_CON_288kHz	0x01
+#define I2C_PCA_CON_217kHz	0x02
+#define I2C_PCA_CON_146kHz	0x03
+#define I2C_PCA_CON_88kHz	0x04
+#define I2C_PCA_CON_59kHz	0x05
+#define I2C_PCA_CON_44kHz	0x06
+#define I2C_PCA_CON_36kHz	0x07
+
+#endif /* I2C_PCA9564_H */
diff --git a/drivers/i2c/algos/i2c-algo-pcf.c b/drivers/i2c/algos/i2c-algo-pcf.c
new file mode 100644
index 00000000000..8d087dac32a
--- /dev/null
+++ b/drivers/i2c/algos/i2c-algo-pcf.c
@@ -0,0 +1,507 @@
+/* ------------------------------------------------------------------------- */
+/* i2c-algo-pcf.c i2c driver algorithms for PCF8584 adapters		     */
+/* ------------------------------------------------------------------------- */
+/*   Copyright (C) 1995-1997 Simon G. Vogl
+                   1998-2000 Hans Berglund
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.		     */
+/* ------------------------------------------------------------------------- */
+
+/* With some changes from Kyösti Mälkki <kmalkki@cc.hut.fi> and 
+   Frodo Looijaard <frodol@dds.nl> ,and also from Martin Bailey
+   <mbailey@littlefeet-inc.com> */
+
+/* Partially rewriten by Oleg I. Vdovikin <vdovikin@jscc.ru> to handle multiple
+   messages, proper stop/repstart signaling during receive,
+   added detect code */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/i2c.h>
+#include <linux/i2c-algo-pcf.h>
+#include "i2c-algo-pcf.h"
+
+
+#define DEB2(x) if (i2c_debug>=2) x
+#define DEB3(x) if (i2c_debug>=3) x /* print several statistical values*/
+#define DEBPROTO(x) if (i2c_debug>=9) x;
+ 	/* debug the protocol by showing transferred bits */
+#define DEF_TIMEOUT 16
+
+/* module parameters:
+ */
+static int i2c_debug;
+
+/* --- setting states on the bus with the right timing: ---------------	*/
+
+#define set_pcf(adap, ctl, val) adap->setpcf(adap->data, ctl, val)
+#define get_pcf(adap, ctl) adap->getpcf(adap->data, ctl)
+#define get_own(adap) adap->getown(adap->data)
+#define get_clock(adap) adap->getclock(adap->data)
+#define i2c_outb(adap, val) adap->setpcf(adap->data, 0, val)
+#define i2c_inb(adap) adap->getpcf(adap->data, 0)
+
+/* --- other auxiliary functions --------------------------------------	*/
+
+static void i2c_start(struct i2c_algo_pcf_data *adap) 
+{
+	DEBPROTO(printk("S "));
+	set_pcf(adap, 1, I2C_PCF_START);
+}
+
+static void i2c_repstart(struct i2c_algo_pcf_data *adap) 
+{
+	DEBPROTO(printk(" Sr "));
+	set_pcf(adap, 1, I2C_PCF_REPSTART);
+}
+
+
+static void i2c_stop(struct i2c_algo_pcf_data *adap) 
+{
+	DEBPROTO(printk("P\n"));
+	set_pcf(adap, 1, I2C_PCF_STOP);
+}
+
+static int wait_for_bb(struct i2c_algo_pcf_data *adap) {
+
+	int timeout = DEF_TIMEOUT;
+	int status;
+
+	status = get_pcf(adap, 1);
+#ifndef STUB_I2C
+	while (timeout-- && !(status & I2C_PCF_BB)) {
+		udelay(100); /* wait for 100 us */
+		status = get_pcf(adap, 1);
+	}
+#endif
+	if (timeout <= 0) {
+		printk(KERN_ERR "Timeout waiting for Bus Busy\n");
+	}
+	
+	return (timeout<=0);
+}
+
+
+static int wait_for_pin(struct i2c_algo_pcf_data *adap, int *status) {
+
+	int timeout = DEF_TIMEOUT;
+
+	*status = get_pcf(adap, 1);
+#ifndef STUB_I2C
+	while (timeout-- && (*status & I2C_PCF_PIN)) {
+		adap->waitforpin();
+		*status = get_pcf(adap, 1);
+	}
+	if (*status & I2C_PCF_LAB) {
+		DEB2(printk(KERN_INFO 
+			"i2c-algo-pcf.o: lost arbitration (CSR 0x%02x)\n",
+			 *status));
+		/* Cleanup from LAB-- reset and enable ESO.
+		 * This resets the PCF8584; since we've lost the bus, no
+		 * further attempts should be made by callers to clean up 
+		 * (no i2c_stop() etc.)
+		 */
+		set_pcf(adap, 1, I2C_PCF_PIN);
+		set_pcf(adap, 1, I2C_PCF_ESO);
+		/* TODO: we should pause for a time period sufficient for any
+		 * running I2C transaction to complete-- the arbitration
+		 * logic won't work properly until the next START is seen.
+		 */
+		DEB2(printk(KERN_INFO 
+			"i2c-algo-pcf.o: reset LAB condition (CSR 0x%02x)\n", 
+			get_pcf(adap,1)));
+		return(-EINTR);
+	}
+#endif
+	if (timeout <= 0)
+		return(-1);
+	else
+		return(0);
+}
+
+/* 
+ * This should perform the 'PCF8584 initialization sequence' as described
+ * in the Philips IC12 data book (1995, Aug 29).
+ * There should be a 30 clock cycle wait after reset, I assume this
+ * has been fulfilled.
+ * There should be a delay at the end equal to the longest I2C message
+ * to synchronize the BB-bit (in multimaster systems). How long is
+ * this? I assume 1 second is always long enough.
+ *
+ * vdovikin: added detect code for PCF8584
+ */
+static int pcf_init_8584 (struct i2c_algo_pcf_data *adap)
+{
+	unsigned char temp;
+
+	DEB3(printk(KERN_DEBUG "i2c-algo-pcf.o: PCF state 0x%02x\n", get_pcf(adap, 1)));
+
+	/* S1=0x80: S0 selected, serial interface off */
+	set_pcf(adap, 1, I2C_PCF_PIN);
+	/* check to see S1 now used as R/W ctrl -
+	   PCF8584 does that when ESO is zero */
+	if (((temp = get_pcf(adap, 1)) & 0x7f) != (0)) {
+		DEB2(printk(KERN_ERR "i2c-algo-pcf.o: PCF detection failed -- can't select S0 (0x%02x).\n", temp));
+		return -ENXIO; /* definetly not PCF8584 */
+	}
+
+	/* load own address in S0, effective address is (own << 1)	*/
+	i2c_outb(adap, get_own(adap));
+	/* check it's really written */
+	if ((temp = i2c_inb(adap)) != get_own(adap)) {
+		DEB2(printk(KERN_ERR "i2c-algo-pcf.o: PCF detection failed -- can't set S0 (0x%02x).\n", temp));
+		return -ENXIO;
+	}
+
+	/* S1=0xA0, next byte in S2					*/
+	set_pcf(adap, 1, I2C_PCF_PIN | I2C_PCF_ES1);
+	/* check to see S2 now selected */
+	if (((temp = get_pcf(adap, 1)) & 0x7f) != I2C_PCF_ES1) {
+		DEB2(printk(KERN_ERR "i2c-algo-pcf.o: PCF detection failed -- can't select S2 (0x%02x).\n", temp));
+		return -ENXIO;
+	}
+
+	/* load clock register S2					*/
+	i2c_outb(adap, get_clock(adap));
+	/* check it's really written, the only 5 lowest bits does matter */
+	if (((temp = i2c_inb(adap)) & 0x1f) != get_clock(adap)) {
+		DEB2(printk(KERN_ERR "i2c-algo-pcf.o: PCF detection failed -- can't set S2 (0x%02x).\n", temp));
+		return -ENXIO;
+	}
+
+	/* Enable serial interface, idle, S0 selected			*/
+	set_pcf(adap, 1, I2C_PCF_IDLE);
+
+	/* check to see PCF is really idled and we can access status register */
+	if ((temp = get_pcf(adap, 1)) != (I2C_PCF_PIN | I2C_PCF_BB)) {
+		DEB2(printk(KERN_ERR "i2c-algo-pcf.o: PCF detection failed -- can't select S1` (0x%02x).\n", temp));
+		return -ENXIO;
+	}
+	
+	printk(KERN_DEBUG "i2c-algo-pcf.o: deteted and initialized PCF8584.\n");
+
+	return 0;
+}
+
+
+/* ----- Utility functions
+ */
+
+static inline int try_address(struct i2c_algo_pcf_data *adap,
+		       unsigned char addr, int retries)
+{
+	int i, status, ret = -1;
+	int wfp;
+	for (i=0;i<retries;i++) {
+		i2c_outb(adap, addr);
+		i2c_start(adap);
+		status = get_pcf(adap, 1);
+		if ((wfp = wait_for_pin(adap, &status)) >= 0) {
+			if ((status & I2C_PCF_LRB) == 0) { 
+				i2c_stop(adap);
+				break;	/* success! */
+			}
+		}
+		if (wfp == -EINTR) {
+			/* arbitration lost */
+			udelay(adap->udelay);
+			return -EINTR;
+		}
+		i2c_stop(adap);
+		udelay(adap->udelay);
+	}
+	DEB2(if (i) printk(KERN_DEBUG "i2c-algo-pcf.o: needed %d retries for %d\n",i,
+	                   addr));
+	return ret;
+}
+
+
+static int pcf_sendbytes(struct i2c_adapter *i2c_adap, const char *buf,
+                         int count, int last)
+{
+	struct i2c_algo_pcf_data *adap = i2c_adap->algo_data;
+	int wrcount, status, timeout;
+    
+	for (wrcount=0; wrcount<count; ++wrcount) {
+		DEB2(dev_dbg(&i2c_adap->dev, "i2c_write: writing %2.2X\n",
+				buf[wrcount]&0xff));
+		i2c_outb(adap, buf[wrcount]);
+		timeout = wait_for_pin(adap, &status);
+		if (timeout) {
+			if (timeout == -EINTR) {
+				/* arbitration lost */
+				return -EINTR;
+			}
+			i2c_stop(adap);
+			dev_err(&i2c_adap->dev, "i2c_write: error - timeout.\n");
+			return -EREMOTEIO; /* got a better one ?? */
+		}
+#ifndef STUB_I2C
+		if (status & I2C_PCF_LRB) {
+			i2c_stop(adap);
+			dev_err(&i2c_adap->dev, "i2c_write: error - no ack.\n");
+			return -EREMOTEIO; /* got a better one ?? */
+		}
+#endif
+	}
+	if (last) {
+		i2c_stop(adap);
+	}
+	else {
+		i2c_repstart(adap);
+	}
+
+	return (wrcount);
+}
+
+
+static int pcf_readbytes(struct i2c_adapter *i2c_adap, char *buf,
+                         int count, int last)
+{
+	int i, status;
+	struct i2c_algo_pcf_data *adap = i2c_adap->algo_data;
+	int wfp;
+
+	/* increment number of bytes to read by one -- read dummy byte */
+	for (i = 0; i <= count; i++) {
+
+		if ((wfp = wait_for_pin(adap, &status))) {
+			if (wfp == -EINTR) {
+				/* arbitration lost */
+				return -EINTR;
+			}
+			i2c_stop(adap);
+			dev_err(&i2c_adap->dev, "pcf_readbytes timed out.\n");
+			return (-1);
+		}
+
+#ifndef STUB_I2C
+		if ((status & I2C_PCF_LRB) && (i != count)) {
+			i2c_stop(adap);
+			dev_err(&i2c_adap->dev, "i2c_read: i2c_inb, No ack.\n");
+			return (-1);
+		}
+#endif
+		
+		if (i == count - 1) {
+			set_pcf(adap, 1, I2C_PCF_ESO);
+		} else 
+		if (i == count) {
+			if (last) {
+				i2c_stop(adap);
+			} else {
+				i2c_repstart(adap);
+			}
+		};
+
+		if (i) {
+			buf[i - 1] = i2c_inb(adap);
+		} else {
+			i2c_inb(adap); /* dummy read */
+		}
+	}
+
+	return (i - 1);
+}
+
+
+static inline int pcf_doAddress(struct i2c_algo_pcf_data *adap,
+                                struct i2c_msg *msg, int retries) 
+{
+	unsigned short flags = msg->flags;
+	unsigned char addr;
+	int ret;
+	if ( (flags & I2C_M_TEN)  ) { 
+		/* a ten bit address */
+		addr = 0xf0 | (( msg->addr >> 7) & 0x03);
+		DEB2(printk(KERN_DEBUG "addr0: %d\n",addr));
+		/* try extended address code...*/
+		ret = try_address(adap, addr, retries);
+		if (ret!=1) {
+			printk(KERN_ERR "died at extended address code.\n");
+			return -EREMOTEIO;
+		}
+		/* the remaining 8 bit address */
+		i2c_outb(adap,msg->addr & 0x7f);
+/* Status check comes here */
+		if (ret != 1) {
+			printk(KERN_ERR "died at 2nd address code.\n");
+			return -EREMOTEIO;
+		}
+		if ( flags & I2C_M_RD ) {
+			i2c_repstart(adap);
+			/* okay, now switch into reading mode */
+			addr |= 0x01;
+			ret = try_address(adap, addr, retries);
+			if (ret!=1) {
+				printk(KERN_ERR "died at extended address code.\n");
+				return -EREMOTEIO;
+			}
+		}
+	} else {		/* normal 7bit address	*/
+		addr = ( msg->addr << 1 );
+		if (flags & I2C_M_RD )
+			addr |= 1;
+		if (flags & I2C_M_REV_DIR_ADDR )
+			addr ^= 1;
+		i2c_outb(adap, addr);
+	}
+	return 0;
+}
+
+static int pcf_xfer(struct i2c_adapter *i2c_adap,
+		    struct i2c_msg *msgs, 
+		    int num)
+{
+	struct i2c_algo_pcf_data *adap = i2c_adap->algo_data;
+	struct i2c_msg *pmsg;
+	int i;
+	int ret=0, timeout, status;
+    
+
+	/* Check for bus busy */
+	timeout = wait_for_bb(adap);
+	if (timeout) {
+		DEB2(printk(KERN_ERR "i2c-algo-pcf.o: "
+		            "Timeout waiting for BB in pcf_xfer\n");)
+		return -EIO;
+	}
+	
+	for (i = 0;ret >= 0 && i < num; i++) {
+		pmsg = &msgs[i];
+
+		DEB2(printk(KERN_DEBUG "i2c-algo-pcf.o: Doing %s %d bytes to 0x%02x - %d of %d messages\n",
+		     pmsg->flags & I2C_M_RD ? "read" : "write",
+                     pmsg->len, pmsg->addr, i + 1, num);)
+    
+		ret = pcf_doAddress(adap, pmsg, i2c_adap->retries);
+
+		/* Send START */
+		if (i == 0) {
+			i2c_start(adap); 
+		}
+    
+		/* Wait for PIN (pending interrupt NOT) */
+		timeout = wait_for_pin(adap, &status);
+		if (timeout) {
+			if (timeout == -EINTR) {
+				/* arbitration lost */
+				return (-EINTR);
+			}
+			i2c_stop(adap);
+			DEB2(printk(KERN_ERR "i2c-algo-pcf.o: Timeout waiting "
+				    "for PIN(1) in pcf_xfer\n");)
+			return (-EREMOTEIO);
+		}
+    
+#ifndef STUB_I2C
+		/* Check LRB (last rcvd bit - slave ack) */
+		if (status & I2C_PCF_LRB) {
+			i2c_stop(adap);
+			DEB2(printk(KERN_ERR "i2c-algo-pcf.o: No LRB(1) in pcf_xfer\n");)
+			return (-EREMOTEIO);
+		}
+#endif
+    
+		DEB3(printk(KERN_DEBUG "i2c-algo-pcf.o: Msg %d, addr=0x%x, flags=0x%x, len=%d\n",
+			    i, msgs[i].addr, msgs[i].flags, msgs[i].len);)
+    
+		/* Read */
+		if (pmsg->flags & I2C_M_RD) {
+			/* read bytes into buffer*/
+			ret = pcf_readbytes(i2c_adap, pmsg->buf, pmsg->len,
+                                            (i + 1 == num));
+        
+			if (ret != pmsg->len) {
+				DEB2(printk(KERN_DEBUG "i2c-algo-pcf.o: fail: "
+					    "only read %d bytes.\n",ret));
+			} else {
+				DEB2(printk(KERN_DEBUG "i2c-algo-pcf.o: read %d bytes.\n",ret));
+			}
+		} else { /* Write */
+			ret = pcf_sendbytes(i2c_adap, pmsg->buf, pmsg->len,
+                                            (i + 1 == num));
+        
+			if (ret != pmsg->len) {
+				DEB2(printk(KERN_DEBUG "i2c-algo-pcf.o: fail: "
+					    "only wrote %d bytes.\n",ret));
+			} else {
+				DEB2(printk(KERN_DEBUG "i2c-algo-pcf.o: wrote %d bytes.\n",ret));
+			}
+		}
+	}
+
+	return (i);
+}
+
+static u32 pcf_func(struct i2c_adapter *adap)
+{
+	return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL | 
+	       I2C_FUNC_10BIT_ADDR | I2C_FUNC_PROTOCOL_MANGLING; 
+}
+
+/* -----exported algorithm data: -------------------------------------	*/
+
+static struct i2c_algorithm pcf_algo = {
+	.name		= "PCF8584 algorithm",
+	.id		= I2C_ALGO_PCF,
+	.master_xfer	= pcf_xfer,
+	.functionality	= pcf_func,
+};
+
+/* 
+ * registering functions to load algorithms at runtime 
+ */
+int i2c_pcf_add_bus(struct i2c_adapter *adap)
+{
+	struct i2c_algo_pcf_data *pcf_adap = adap->algo_data;
+	int rval;
+
+	DEB2(dev_dbg(&adap->dev, "hw routines registered.\n"));
+
+	/* register new adapter to i2c module... */
+
+	adap->id |= pcf_algo.id;
+	adap->algo = &pcf_algo;
+
+	adap->timeout = 100;		/* default values, should	*/
+	adap->retries = 3;		/* be replaced by defines	*/
+
+	rval = pcf_init_8584(pcf_adap);
+	if (!rval)
+		i2c_add_adapter(adap);
+	return rval;
+}
+
+
+int i2c_pcf_del_bus(struct i2c_adapter *adap)
+{
+	return i2c_del_adapter(adap);
+}
+
+EXPORT_SYMBOL(i2c_pcf_add_bus);
+EXPORT_SYMBOL(i2c_pcf_del_bus);
+
+MODULE_AUTHOR("Hans Berglund <hb@spacetec.no>");
+MODULE_DESCRIPTION("I2C-Bus PCF8584 algorithm");
+MODULE_LICENSE("GPL");
+
+module_param(i2c_debug, int, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(i2c_debug,
+        "debug level - 0 off; 1 normal; 2,3 more verbose; 9 pcf-protocol");
diff --git a/drivers/i2c/algos/i2c-algo-pcf.h b/drivers/i2c/algos/i2c-algo-pcf.h
new file mode 100644
index 00000000000..5263a9eeb8d
--- /dev/null
+++ b/drivers/i2c/algos/i2c-algo-pcf.h
@@ -0,0 +1,76 @@
+/* -------------------------------------------------------------------- */
+/* i2c-pcf8584.h: PCF 8584 global defines				*/
+/* -------------------------------------------------------------------- */
+/*   Copyright (C) 1996 Simon G. Vogl
+                   1999 Hans Berglund
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.		*/
+/* --------------------------------------------------------------------	*/
+
+/* With some changes from Frodo Looijaard <frodol@dds.nl> */
+
+#ifndef I2C_PCF8584_H
+#define I2C_PCF8584_H 1
+
+/* ----- Control register bits ----------------------------------------	*/
+#define I2C_PCF_PIN	0x80
+#define I2C_PCF_ESO	0x40
+#define I2C_PCF_ES1	0x20
+#define I2C_PCF_ES2	0x10
+#define I2C_PCF_ENI	0x08
+#define I2C_PCF_STA	0x04
+#define I2C_PCF_STO	0x02
+#define I2C_PCF_ACK	0x01
+
+#define I2C_PCF_START    (I2C_PCF_PIN | I2C_PCF_ESO | I2C_PCF_STA | I2C_PCF_ACK)
+#define I2C_PCF_STOP     (I2C_PCF_PIN | I2C_PCF_ESO | I2C_PCF_STO | I2C_PCF_ACK)
+#define I2C_PCF_REPSTART (              I2C_PCF_ESO | I2C_PCF_STA | I2C_PCF_ACK)
+#define I2C_PCF_IDLE     (I2C_PCF_PIN | I2C_PCF_ESO               | I2C_PCF_ACK)
+
+/* ----- Status register bits -----------------------------------------	*/
+/*#define I2C_PCF_PIN  0x80    as above*/
+
+#define I2C_PCF_INI 0x40   /* 1 if not initialized */
+#define I2C_PCF_STS 0x20
+#define I2C_PCF_BER 0x10
+#define I2C_PCF_AD0 0x08
+#define I2C_PCF_LRB 0x08
+#define I2C_PCF_AAS 0x04
+#define I2C_PCF_LAB 0x02
+#define I2C_PCF_BB  0x01
+
+/* ----- Chip clock frequencies ---------------------------------------	*/
+#define I2C_PCF_CLK3	0x00
+#define I2C_PCF_CLK443	0x10
+#define I2C_PCF_CLK6	0x14
+#define I2C_PCF_CLK	0x18
+#define I2C_PCF_CLK12	0x1c
+
+/* ----- transmission frequencies -------------------------------------	*/
+#define I2C_PCF_TRNS90 0x00	/*  90 kHz */
+#define I2C_PCF_TRNS45 0x01	/*  45 kHz */
+#define I2C_PCF_TRNS11 0x02	/*  11 kHz */
+#define I2C_PCF_TRNS15 0x03	/* 1.5 kHz */
+
+
+/* ----- Access to internal registers according to ES1,ES2 ------------	*/
+/* they are mapped to the data port ( a0 = 0 ) 				*/
+/* available when ESO == 0 :						*/
+
+#define I2C_PCF_OWNADR	0
+#define I2C_PCF_INTREG	I2C_PCF_ES2
+#define I2C_PCF_CLKREG	I2C_PCF_ES1
+
+#endif /* I2C_PCF8584_H */
diff --git a/drivers/i2c/algos/i2c-algo-sgi.c b/drivers/i2c/algos/i2c-algo-sgi.c
new file mode 100644
index 00000000000..422721b241e
--- /dev/null
+++ b/drivers/i2c/algos/i2c-algo-sgi.c
@@ -0,0 +1,189 @@
+/*
+ * i2c-algo-sgi.c: i2c driver algorithms for SGI adapters.
+ * 
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License version 2 as published by the Free Software Foundation.
+ *
+ * Copyright (C) 2003 Ladislav Michl <ladis@linux-mips.org>
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/delay.h>
+
+#include <linux/i2c.h>
+#include <linux/i2c-algo-sgi.h>
+
+
+#define SGI_I2C_FORCE_IDLE	(0 << 0)
+#define SGI_I2C_NOT_IDLE	(1 << 0)
+#define SGI_I2C_WRITE		(0 << 1)
+#define SGI_I2C_READ		(1 << 1)
+#define SGI_I2C_RELEASE_BUS	(0 << 2)
+#define SGI_I2C_HOLD_BUS	(1 << 2)
+#define SGI_I2C_XFER_DONE	(0 << 4)
+#define SGI_I2C_XFER_BUSY	(1 << 4)
+#define SGI_I2C_ACK		(0 << 5)
+#define SGI_I2C_NACK		(1 << 5)
+#define SGI_I2C_BUS_OK		(0 << 7)
+#define SGI_I2C_BUS_ERR		(1 << 7)
+
+#define get_control()		adap->getctrl(adap->data)
+#define set_control(val)	adap->setctrl(adap->data, val)
+#define read_data()		adap->rdata(adap->data)
+#define write_data(val)		adap->wdata(adap->data, val)
+
+
+static int wait_xfer_done(struct i2c_algo_sgi_data *adap)
+{
+	int i;
+
+	for (i = 0; i < adap->xfer_timeout; i++) {
+		if ((get_control() & SGI_I2C_XFER_BUSY) == 0)
+			return 0;
+		udelay(1);
+	}
+
+	return -ETIMEDOUT;
+}
+
+static int wait_ack(struct i2c_algo_sgi_data *adap)
+{
+	int i;
+
+	if (wait_xfer_done(adap))
+		return -ETIMEDOUT;
+	for (i = 0; i < adap->ack_timeout; i++) {
+		if ((get_control() & SGI_I2C_NACK) == 0)
+			return 0;
+		udelay(1);
+	}
+
+	return -ETIMEDOUT;
+}
+
+static int force_idle(struct i2c_algo_sgi_data *adap)
+{
+	int i;
+
+	set_control(SGI_I2C_FORCE_IDLE);
+	for (i = 0; i < adap->xfer_timeout; i++) {
+		if ((get_control() & SGI_I2C_NOT_IDLE) == 0)
+			goto out;
+		udelay(1);
+	}
+	return -ETIMEDOUT;
+out:
+	if (get_control() & SGI_I2C_BUS_ERR)
+		return -EIO;
+	return 0;
+}
+
+static int do_address(struct i2c_algo_sgi_data *adap, unsigned int addr,
+		      int rd)
+{
+	if (rd)
+		set_control(SGI_I2C_NOT_IDLE);
+	/* Check if bus is idle, eventually force it to do so */
+	if (get_control() & SGI_I2C_NOT_IDLE)
+		if (force_idle(adap))
+	                return -EIO;
+	/* Write out the i2c chip address and specify operation */
+	set_control(SGI_I2C_HOLD_BUS | SGI_I2C_WRITE | SGI_I2C_NOT_IDLE);
+	if (rd)
+		addr |= 1;
+	write_data(addr);
+	if (wait_ack(adap))
+		return -EIO;
+	return 0;
+}
+
+static int i2c_read(struct i2c_algo_sgi_data *adap, unsigned char *buf,
+		    unsigned int len)
+{
+	int i;
+
+	set_control(SGI_I2C_HOLD_BUS | SGI_I2C_READ | SGI_I2C_NOT_IDLE);
+	for (i = 0; i < len; i++) {
+		if (wait_xfer_done(adap))
+			return -EIO;
+		buf[i] = read_data();
+	}
+	set_control(SGI_I2C_RELEASE_BUS | SGI_I2C_FORCE_IDLE);
+
+	return 0;
+
+}
+
+static int i2c_write(struct i2c_algo_sgi_data *adap, unsigned char *buf,
+		     unsigned int len)
+{
+	int i;
+
+	/* We are already in write state */
+	for (i = 0; i < len; i++) {
+		write_data(buf[i]);
+		if (wait_ack(adap))
+			return -EIO;
+	}
+	return 0;
+}
+
+static int sgi_xfer(struct i2c_adapter *i2c_adap, struct i2c_msg *msgs,
+		    int num)
+{
+	struct i2c_algo_sgi_data *adap = i2c_adap->algo_data;
+	struct i2c_msg *p;
+	int i, err = 0;
+
+	for (i = 0; !err && i < num; i++) {
+		p = &msgs[i];
+		err = do_address(adap, p->addr, p->flags & I2C_M_RD);
+		if (err || !p->len)
+			continue;
+		if (p->flags & I2C_M_RD)
+			err = i2c_read(adap, p->buf, p->len);
+		else
+			err = i2c_write(adap, p->buf, p->len);
+	}
+
+	return err;
+}
+
+static u32 sgi_func(struct i2c_adapter *adap)
+{
+	return I2C_FUNC_SMBUS_EMUL;
+}
+
+static struct i2c_algorithm sgi_algo = {
+	.name		= "SGI algorithm",
+	.id		= I2C_ALGO_SGI,
+	.master_xfer	= sgi_xfer,
+	.functionality	= sgi_func,
+};
+
+/* 
+ * registering functions to load algorithms at runtime 
+ */
+int i2c_sgi_add_bus(struct i2c_adapter *adap)
+{
+	adap->id |= sgi_algo.id;
+	adap->algo = &sgi_algo;
+
+	return i2c_add_adapter(adap);
+}
+
+
+int i2c_sgi_del_bus(struct i2c_adapter *adap)
+{
+	return i2c_del_adapter(adap);
+}
+
+EXPORT_SYMBOL(i2c_sgi_add_bus);
+EXPORT_SYMBOL(i2c_sgi_del_bus);
+
+MODULE_AUTHOR("Ladislav Michl <ladis@linux-mips.org>");
+MODULE_DESCRIPTION("I2C-Bus SGI algorithm");
+MODULE_LICENSE("GPL");
diff --git a/drivers/i2c/algos/i2c-algo-sibyte.c b/drivers/i2c/algos/i2c-algo-sibyte.c
new file mode 100644
index 00000000000..35789bb7126
--- /dev/null
+++ b/drivers/i2c/algos/i2c-algo-sibyte.c
@@ -0,0 +1,222 @@
+/* ------------------------------------------------------------------------- */
+/* i2c-algo-sibyte.c i2c driver algorithms for bit-shift adapters		     */
+/* ------------------------------------------------------------------------- */
+/*   Copyright (C) 2001,2002,2003 Broadcom Corporation
+     Copyright (C) 1995-2000 Simon G. Vogl
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.		     */
+/* ------------------------------------------------------------------------- */
+
+/* With some changes from Kyösti Mälkki <kmalkki@cc.hut.fi> and even
+   Frodo Looijaard <frodol@dds.nl>.  */
+
+/* Ported for SiByte SOCs by Broadcom Corporation.  */
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+
+#include <asm/io.h>
+#include <asm/sibyte/sb1250_regs.h>
+#include <asm/sibyte/sb1250_smbus.h>
+
+#include <linux/i2c.h>
+#include <linux/i2c-algo-sibyte.h>
+
+/* ----- global defines ----------------------------------------------- */
+#define SMB_CSR(a,r) ((long)(a->reg_base + r))
+
+/* ----- global variables ---------------------------------------------	*/
+
+/* module parameters:
+ */
+static int bit_scan=0;	/* have a look at what's hanging 'round		*/
+
+
+static int smbus_xfer(struct i2c_adapter *i2c_adap, u16 addr, 
+                      unsigned short flags, char read_write,
+                      u8 command, int size, union i2c_smbus_data * data)
+{
+	struct i2c_algo_sibyte_data *adap = i2c_adap->algo_data;
+        int data_bytes = 0;
+        int error;
+
+        while (csr_in32(SMB_CSR(adap, R_SMB_STATUS)) & M_SMB_BUSY)
+                ;
+
+        switch (size) {
+        case I2C_SMBUS_QUICK:
+                csr_out32((V_SMB_ADDR(addr) | (read_write == I2C_SMBUS_READ ? M_SMB_QDATA : 0) |
+			   V_SMB_TT_QUICKCMD), SMB_CSR(adap, R_SMB_START));
+                break;
+        case I2C_SMBUS_BYTE:
+                if (read_write == I2C_SMBUS_READ) {
+                        csr_out32((V_SMB_ADDR(addr) | V_SMB_TT_RD1BYTE),
+				  SMB_CSR(adap, R_SMB_START));
+                        data_bytes = 1;
+                } else {
+                        csr_out32(V_SMB_CMD(command), SMB_CSR(adap, R_SMB_CMD));
+                        csr_out32((V_SMB_ADDR(addr) | V_SMB_TT_WR1BYTE),
+				  SMB_CSR(adap, R_SMB_START));
+                }
+                break;
+        case I2C_SMBUS_BYTE_DATA:
+                csr_out32(V_SMB_CMD(command), SMB_CSR(adap, R_SMB_CMD));
+                if (read_write == I2C_SMBUS_READ) {
+                        csr_out32((V_SMB_ADDR(addr) | V_SMB_TT_CMD_RD1BYTE),
+				  SMB_CSR(adap, R_SMB_START));
+                        data_bytes = 1;
+                } else {
+                        csr_out32(V_SMB_LB(data->byte), SMB_CSR(adap, R_SMB_DATA));
+                        csr_out32((V_SMB_ADDR(addr) | V_SMB_TT_WR2BYTE),
+				  SMB_CSR(adap, R_SMB_START));
+                }
+                break;
+        case I2C_SMBUS_WORD_DATA:
+                csr_out32(V_SMB_CMD(command), SMB_CSR(adap, R_SMB_CMD));
+                if (read_write == I2C_SMBUS_READ) {
+                        csr_out32((V_SMB_ADDR(addr) | V_SMB_TT_CMD_RD2BYTE),
+				  SMB_CSR(adap, R_SMB_START));
+                        data_bytes = 2;
+                } else {
+                        csr_out32(V_SMB_LB(data->word & 0xff), SMB_CSR(adap, R_SMB_DATA));
+                        csr_out32(V_SMB_MB(data->word >> 8), SMB_CSR(adap, R_SMB_DATA));
+                        csr_out32((V_SMB_ADDR(addr) | V_SMB_TT_WR2BYTE),
+				  SMB_CSR(adap, R_SMB_START));
+                }
+                break;
+        default:
+                return -1;      /* XXXKW better error code? */
+        }
+
+        while (csr_in32(SMB_CSR(adap, R_SMB_STATUS)) & M_SMB_BUSY)
+                ;
+
+        error = csr_in32(SMB_CSR(adap, R_SMB_STATUS));
+        if (error & M_SMB_ERROR) {
+                /* Clear error bit by writing a 1 */
+                csr_out32(M_SMB_ERROR, SMB_CSR(adap, R_SMB_STATUS));
+                return -1;      /* XXXKW better error code? */
+        }
+
+        if (data_bytes == 1)
+                data->byte = csr_in32(SMB_CSR(adap, R_SMB_DATA)) & 0xff;
+        if (data_bytes == 2)
+                data->word = csr_in32(SMB_CSR(adap, R_SMB_DATA)) & 0xffff;
+
+        return 0;
+}
+
+static int algo_control(struct i2c_adapter *adapter, 
+	unsigned int cmd, unsigned long arg)
+{
+	return 0;
+}
+
+static u32 bit_func(struct i2c_adapter *adap)
+{
+	return (I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE |
+                I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA);
+}
+
+
+/* -----exported algorithm data: -------------------------------------	*/
+
+static struct i2c_algorithm i2c_sibyte_algo = {
+	.name		= "SiByte algorithm",
+	.id		= I2C_ALGO_SIBYTE,
+	.smbus_xfer	= smbus_xfer,
+	.algo_control	= algo_control, /* ioctl */
+	.functionality	= bit_func,
+};
+
+/* 
+ * registering functions to load algorithms at runtime 
+ */
+int i2c_sibyte_add_bus(struct i2c_adapter *i2c_adap, int speed)
+{
+	int i;
+	struct i2c_algo_sibyte_data *adap = i2c_adap->algo_data;
+
+	/* register new adapter to i2c module... */
+
+	i2c_adap->id |= i2c_sibyte_algo.id;
+	i2c_adap->algo = &i2c_sibyte_algo;
+        
+        /* Set the frequency to 100 kHz */
+        csr_out32(speed, SMB_CSR(adap,R_SMB_FREQ));
+        csr_out32(0, SMB_CSR(adap,R_SMB_CONTROL));
+
+	/* scan bus */
+	if (bit_scan) {
+                union i2c_smbus_data data;
+                int rc;
+		printk(KERN_INFO " i2c-algo-sibyte.o: scanning bus %s.\n",
+		       i2c_adap->name);
+		for (i = 0x00; i < 0x7f; i++) {
+                        /* XXXKW is this a realistic probe? */
+                        rc = smbus_xfer(i2c_adap, i, 0, I2C_SMBUS_READ, 0,
+                                        I2C_SMBUS_BYTE_DATA, &data);
+			if (!rc) {
+				printk("(%02x)",i); 
+			} else 
+				printk("."); 
+		}
+		printk("\n");
+	}
+
+	i2c_add_adapter(i2c_adap);
+
+	return 0;
+}
+
+
+int i2c_sibyte_del_bus(struct i2c_adapter *adap)
+{
+	int res;
+
+	if ((res = i2c_del_adapter(adap)) < 0)
+		return res;
+
+	return 0;
+}
+
+int __init i2c_algo_sibyte_init (void)
+{
+	printk("i2c-algo-sibyte.o: i2c SiByte algorithm module\n");
+	return 0;
+}
+
+
+EXPORT_SYMBOL(i2c_sibyte_add_bus);
+EXPORT_SYMBOL(i2c_sibyte_del_bus);
+
+#ifdef MODULE
+MODULE_AUTHOR("Kip Walker, Broadcom Corp.");
+MODULE_DESCRIPTION("SiByte I2C-Bus algorithm");
+MODULE_PARM(bit_scan, "i");
+MODULE_PARM_DESC(bit_scan, "Scan for active chips on the bus");
+MODULE_LICENSE("GPL");
+
+int init_module(void) 
+{
+	return i2c_algo_sibyte_init();
+}
+
+void cleanup_module(void) 
+{
+}
+#endif
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
new file mode 100644
index 00000000000..edf8051da3b
--- /dev/null
+++ b/drivers/i2c/busses/Kconfig
@@ -0,0 +1,499 @@
+#
+# Sensor device configuration
+#
+
+menu "I2C Hardware Bus support"
+	depends on I2C
+
+config I2C_ALI1535
+	tristate "ALI 1535"
+	depends on I2C && PCI && EXPERIMENTAL
+	help
+	  If you say yes to this option, support will be included for the SMB
+	  Host controller on Acer Labs Inc. (ALI) M1535 South Bridges.  The SMB
+	  controller is part of the 7101 device, which is an ACPI-compliant
+	  Power Management Unit (PMU).
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called i2c-ali1535.
+
+config I2C_ALI1563
+	tristate "ALI 1563"
+	depends on I2C && PCI && EXPERIMENTAL
+	help
+	  If you say yes to this option, support will be included for the SMB
+	  Host controller on Acer Labs Inc. (ALI) M1563 South Bridges.  The SMB
+	  controller is part of the 7101 device, which is an ACPI-compliant
+	  Power Management Unit (PMU).
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called i2c-ali1563.
+
+config I2C_ALI15X3
+	tristate "ALI 15x3"
+	depends on I2C && PCI && EXPERIMENTAL
+	help
+	  If you say yes to this option, support will be included for the
+	  Acer Labs Inc. (ALI) M1514 and M1543 motherboard I2C interfaces.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called i2c-ali15x3.
+
+config I2C_AMD756
+	tristate "AMD 756/766/768/8111 and nVidia nForce"
+	depends on I2C && PCI && EXPERIMENTAL
+	help
+	  If you say yes to this option, support will be included for the AMD
+	  756/766/768 mainboard I2C interfaces.  The driver also includes
+	  support for the first (SMBus 1.0) I2C interface of the AMD 8111 and
+	  the nVidia nForce I2C interface.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called i2c-amd756.
+
+config I2C_AMD756_S4882
+	tristate "SMBus multiplexing on the Tyan S4882"
+	depends on I2C_AMD756 && EXPERIMENTAL
+	help
+	  Enabling this option will add specific SMBus support for the Tyan
+	  S4882 motherboard.  On this 4-CPU board, the SMBus is multiplexed
+	  over 8 different channels, where the various memory module EEPROMs
+	  and temperature sensors live.  Saying yes here will give you access
+	  to these in addition to the trunk.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called i2c-amd756-s4882.
+
+config I2C_AMD8111
+	tristate "AMD 8111"
+	depends on I2C && PCI && EXPERIMENTAL
+	help
+	  If you say yes to this option, support will be included for the
+	  second (SMBus 2.0) AMD 8111 mainboard I2C interface.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called i2c-amd8111.
+
+config I2C_AU1550
+	tristate "Au1550 SMBus interface"
+	depends on I2C && SOC_AU1550
+	help
+	  If you say yes to this option, support will be included for the
+	  Au1550 SMBus interface.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called i2c-au1550.
+
+config I2C_ELEKTOR
+	tristate "Elektor ISA card"
+	depends on I2C && ISA && BROKEN_ON_SMP
+	select I2C_ALGOPCF
+	help
+	  This supports the PCF8584 ISA bus I2C adapter.  Say Y if you own
+	  such an adapter.
+
+	  This support is also available as a module.  If so, the module 
+	  will be called i2c-elektor.
+
+config I2C_HYDRA
+	tristate "CHRP Apple Hydra Mac I/O I2C interface"
+	depends on I2C && PCI && PPC_CHRP && EXPERIMENTAL
+	select I2C_ALGOBIT
+	help
+	  This supports the use of the I2C interface in the Apple Hydra Mac
+	  I/O chip on some CHRP machines (e.g. the LongTrail).  Say Y if you
+	  have such a machine.
+
+	  This support is also available as a module.  If so, the module
+	  will be called i2c-hydra.
+
+config I2C_I801
+	tristate "Intel 82801 (ICH)"
+	depends on I2C && PCI && EXPERIMENTAL
+	help
+	  If you say yes to this option, support will be included for the Intel
+	  801 family of mainboard I2C interfaces.  Specifically, the following
+	  versions of the chipset are supported:
+	    82801AA
+	    82801AB
+	    82801BA
+	    82801CA/CAM
+	    82801DB
+	    82801EB/ER (ICH5/ICH5R)
+	    6300ESB
+	    ICH6
+	    ICH7
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called i2c-i801.
+
+config I2C_I810
+	tristate "Intel 810/815"
+	depends on I2C && PCI && EXPERIMENTAL
+	select I2C_ALGOBIT
+	help
+	  If you say yes to this option, support will be included for the Intel
+	  810/815 family of mainboard I2C interfaces.  Specifically, the 
+	  following versions of the chipset is supported:
+	    i810AA
+	    i810AB
+	    i810E
+	    i815
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called i2c-i810.
+
+config I2C_PIIX4
+	tristate "Intel PIIX4"
+	depends on I2C && PCI
+	help
+	  If you say yes to this option, support will be included for the Intel
+	  PIIX4 family of mainboard I2C interfaces.  Specifically, the following
+	  versions of the chipset are supported:
+	    Intel PIIX4
+	    Intel 440MX
+	    Serverworks OSB4
+	    Serverworks CSB5
+	    Serverworks CSB6
+	    SMSC Victory66
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called i2c-piix4.
+
+config I2C_IBM_IIC
+	tristate "IBM PPC 4xx on-chip I2C interface"
+	depends on IBM_OCP && I2C
+	help
+	  Say Y here if you want to use IIC peripheral found on 
+	  embedded IBM PPC 4xx based systems. 
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called i2c-ibm_iic.
+
+config I2C_IOP3XX
+	tristate "Intel IOP3xx and IXP4xx on-chip I2C interface"
+	depends on (ARCH_IOP3XX || ARCH_IXP4XX) && I2C
+	help
+	  Say Y here if you want to use the IIC bus controller on
+	  the Intel IOP3xx I/O Processors or IXP4xx Network Processors.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called i2c-iop3xx.
+
+config I2C_ISA
+	tristate "ISA Bus support"
+	depends on I2C && EXPERIMENTAL
+	help
+	  If you say yes to this option, support will be included for i2c
+	  interfaces that are on the ISA bus.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called i2c-isa.
+
+config I2C_ITE
+	tristate "ITE I2C Adapter"
+	depends on I2C && MIPS_ITE8172
+	select I2C_ALGOITE
+	help
+	  This supports the ITE8172 I2C peripheral found on some MIPS
+	  systems. Say Y if you have one of these. You should also say Y for
+	  the ITE I2C driver algorithm support above.
+
+	  This support is also available as a module.  If so, the module 
+	  will be called i2c-ite.
+
+config I2C_IXP4XX
+	tristate "IXP4xx GPIO-Based I2C Interface"
+	depends on I2C && ARCH_IXP4XX
+	select I2C_ALGOBIT
+	help
+	  Say Y here if you have an Intel IXP4xx(420,421,422,425) based 
+	  system and are using GPIO lines for an I2C bus.
+
+	  This support is also available as a module. If so, the module
+	  will be called i2c-ixp4xx.
+
+config I2C_IXP2000
+	tristate "IXP2000 GPIO-Based I2C Interface"
+	depends on I2C && ARCH_IXP2000
+	select I2C_ALGOBIT
+	help
+	  Say Y here if you have an Intel IXP2000(2400, 2800, 2850) based 
+	  system and are using GPIO lines for an I2C bus.
+
+	  This support is also available as a module. If so, the module
+	  will be called i2c-ixp2000.
+
+config I2C_KEYWEST
+	tristate "Powermac Keywest I2C interface"
+	depends on I2C && PPC_PMAC
+	help
+	  This supports the use of the I2C interface in the combo-I/O
+	  chip on recent Apple machines.  Say Y if you have such a machine.
+
+	  This support is also available as a module.  If so, the module 
+	  will be called i2c-keywest.
+
+config I2C_MPC
+	tristate "MPC107/824x/85xx/52xx"
+	depends on I2C && PPC
+	help
+	  If you say yes to this option, support will be included for the
+	  built-in I2C interface on the MPC107/Tsi107/MPC8240/MPC8245 and
+	  MPC85xx family processors. The driver may also work on 52xx
+	  family processors, though interrupts are known not to work.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called i2c-mpc.
+
+config I2C_NFORCE2
+	tristate "Nvidia Nforce2"
+	depends on I2C && PCI && EXPERIMENTAL
+	help
+	  If you say yes to this option, support will be included for the Nvidia
+	  Nforce2 family of mainboard I2C interfaces.
+	  This driver also supports the nForce3 Pro 150 MCP.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called i2c-nforce2.
+
+config I2C_PARPORT
+	tristate "Parallel port adapter"
+	depends on I2C && PARPORT
+	select I2C_ALGOBIT
+	help
+	  This supports parallel port I2C adapters such as the ones made by
+	  Philips or Velleman, Analog Devices evaluation boards, and more.
+	  Basically any adapter using the parallel port as an I2C bus with
+	  no extra chipset is supported by this driver, or could be.
+
+	  This driver is a replacement for (and was inspired by) an older
+	  driver named i2c-philips-par.  The new driver supports more devices,
+	  and makes it easier to add support for new devices.
+	  
+	  Another driver exists, named i2c-parport-light, which doesn't depend
+	  on the parport driver.  This is meant for embedded systems. Don't say
+	  Y here if you intend to say Y or M there.
+
+	  This support is also available as a module.  If so, the module 
+	  will be called i2c-parport.
+
+config I2C_PARPORT_LIGHT
+	tristate "Parallel port adapter (light)"
+	depends on I2C
+	select I2C_ALGOBIT
+	help
+	  This supports parallel port I2C adapters such as the ones made by
+	  Philips or Velleman, Analog Devices evaluation boards, and more.
+	  Basically any adapter using the parallel port as an I2C bus with
+	  no extra chipset is supported by this driver, or could be.
+
+	  This driver is a light version of i2c-parport.  It doesn't depend
+	  on the parport driver, and uses direct I/O access instead.  This
+	  might be prefered on embedded systems where wasting memory for
+	  the clean but heavy parport handling is not an option.  The
+	  drawback is a reduced portability and the impossibility to
+	  dasiy-chain other parallel port devices.
+	  
+	  Don't say Y here if you said Y or M to i2c-parport.  Saying M to
+	  both is possible but both modules should not be loaded at the same
+	  time.
+
+	  This support is also available as a module.  If so, the module 
+	  will be called i2c-parport-light.
+
+config I2C_PROSAVAGE
+	tristate "S3/VIA (Pro)Savage"
+	depends on I2C && PCI && EXPERIMENTAL
+	select I2C_ALGOBIT
+	help
+	  If you say yes to this option, support will be included for the
+	  I2C bus and DDC bus of the S3VIA embedded Savage4 and ProSavage8
+	  graphics processors.
+	  chipsets supported:
+	    S3/VIA KM266/VT8375 aka ProSavage8
+	    S3/VIA KM133/VT8365 aka Savage4
+
+	  This support is also available as a module.  If so, the module 
+	  will be called i2c-prosavage.
+
+config I2C_RPXLITE
+	tristate "Embedded Planet RPX Lite/Classic support"
+	depends on (RPXLITE || RPXCLASSIC) && I2C
+	select I2C_ALGO8XX
+
+config I2C_S3C2410
+	tristate "S3C2410 I2C Driver"
+	depends on I2C && ARCH_S3C2410
+	help
+	  Say Y here to include support for I2C controller in the
+	  Samsung S3C2410 based System-on-Chip devices.
+
+config I2C_SAVAGE4
+	tristate "S3 Savage 4"
+	depends on I2C && PCI && EXPERIMENTAL
+	select I2C_ALGOBIT
+	help
+	  If you say yes to this option, support will be included for the 
+	  S3 Savage 4 I2C interface.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called i2c-savage4.
+
+config I2C_SIBYTE
+	tristate "SiByte SMBus interface"
+	depends on SIBYTE_SB1xxx_SOC && I2C
+	help
+	  Supports the SiByte SOC on-chip I2C interfaces (2 channels).
+
+config SCx200_I2C
+	tristate "NatSemi SCx200 I2C using GPIO pins"
+	depends on SCx200_GPIO && I2C
+	select I2C_ALGOBIT
+	help
+	  Enable the use of two GPIO pins of a SCx200 processor as an I2C bus.
+
+	  If you don't know what to do here, say N.
+
+	  This support is also available as a module.  If so, the module 
+	  will be called scx200_i2c.
+
+config SCx200_I2C_SCL
+	int "GPIO pin used for SCL"
+	depends on SCx200_I2C
+	default "12"
+	help
+	  Enter the GPIO pin number used for the SCL signal.  This value can
+	  also be specified with a module parameter.
+
+config SCx200_I2C_SDA
+	int "GPIO pin used for SDA"
+	depends on SCx200_I2C
+	default "13"
+	help
+	  Enter the GPIO pin number used for the SSA signal.  This value can
+	  also be specified with a module parameter.
+
+config SCx200_ACB
+	tristate "NatSemi SCx200 ACCESS.bus"
+	depends on I2C && PCI
+	help
+	  Enable the use of the ACCESS.bus controllers of a SCx200 processor.
+
+	  If you don't know what to do here, say N.
+
+	  This support is also available as a module.  If so, the module 
+	  will be called scx200_acb.
+
+config I2C_SIS5595
+	tristate "SiS 5595"
+	depends on I2C && PCI && EXPERIMENTAL
+	help
+	  If you say yes to this option, support will be included for the 
+	  SiS5595 SMBus (a subset of I2C) interface.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called i2c-sis5595.
+
+config I2C_SIS630
+	tristate "SiS 630/730"
+	depends on I2C && PCI && EXPERIMENTAL
+	help
+	  If you say yes to this option, support will be included for the 
+	  SiS630 and SiS730 SMBus (a subset of I2C) interface.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called i2c-sis630.
+
+config I2C_SIS96X
+	tristate "SiS 96x"
+	depends on I2C && PCI && EXPERIMENTAL
+	help
+	  If you say yes to this option, support will be included for the SiS
+	  96x SMBus (a subset of I2C) interfaces.  Specifically, the following
+	  chipsets are supported:
+	    645/961
+	    645DX/961
+	    645DX/962
+	    648/961
+	    650/961
+	    735
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called i2c-sis96x.
+
+config I2C_STUB
+	tristate "I2C/SMBus Test Stub"
+	depends on I2C && EXPERIMENTAL && 'm'
+	default 'n'
+	help
+	  This module may be useful to developers of SMBus client drivers,
+	  especially for certain kinds of sensor chips.
+
+	  If you do build this module, be sure to read the notes and warnings
+	  in <file:Documentation/i2c/i2c-stub>.
+
+	  If you don't know what to do here, definitely say N.
+
+config I2C_VIA
+	tristate "VIA 82C586B"
+	depends on I2C && PCI && EXPERIMENTAL
+	select I2C_ALGOBIT
+	help
+	  If you say yes to this option, support will be included for the VIA
+          82C586B I2C interface
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called i2c-via.
+
+config I2C_VIAPRO
+	tristate "VIA 82C596/82C686/823x"
+	depends on I2C && PCI && EXPERIMENTAL
+	help
+	  If you say yes to this option, support will be included for the VIA
+	  82C596/82C686/823x I2C interfaces.  Specifically, the following 
+	  chipsets are supported:
+	  82C596A/B
+	  82C686A/B
+	  8231
+	  8233
+	  8233A
+	  8235
+	  8237
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called i2c-viapro.
+
+config I2C_VOODOO3
+	tristate "Voodoo 3"
+	depends on I2C && PCI && EXPERIMENTAL
+	select I2C_ALGOBIT
+	help
+	  If you say yes to this option, support will be included for the
+	  Voodoo 3 I2C interface.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called i2c-voodoo3.
+
+config I2C_PCA_ISA
+	tristate "PCA9564 on an ISA bus"
+	depends on I2C
+	select I2C_ALGOPCA
+	help
+	  This driver supports ISA boards using the Philips PCA 9564
+	  Parallel bus to I2C bus controller
+	  
+	  This driver can also be built as a module.  If so, the module
+	  will be called i2c-pca-isa.
+
+config I2C_MV64XXX
+	tristate "Marvell mv64xxx I2C Controller"
+	depends on I2C && MV64X60 && EXPERIMENTAL
+	help
+	  If you say yes to this option, support will be included for the
+	  built-in I2C interface on the Marvell 64xxx line of host bridges.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called i2c-mv64xxx.
+
+endmenu
diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
new file mode 100644
index 00000000000..42d6d814da7
--- /dev/null
+++ b/drivers/i2c/busses/Makefile
@@ -0,0 +1,47 @@
+#
+# Makefile for the i2c bus drivers.
+#
+
+obj-$(CONFIG_I2C_ALI1535)	+= i2c-ali1535.o
+obj-$(CONFIG_I2C_ALI1563)	+= i2c-ali1563.o
+obj-$(CONFIG_I2C_ALI15X3)	+= i2c-ali15x3.o
+obj-$(CONFIG_I2C_AMD756)	+= i2c-amd756.o
+obj-$(CONFIG_I2C_AMD756_S4882)	+= i2c-amd756-s4882.o
+obj-$(CONFIG_I2C_AMD8111)	+= i2c-amd8111.o
+obj-$(CONFIG_I2C_AU1550)	+= i2c-au1550.o
+obj-$(CONFIG_I2C_ELEKTOR)	+= i2c-elektor.o
+obj-$(CONFIG_I2C_HYDRA)		+= i2c-hydra.o
+obj-$(CONFIG_I2C_I801)		+= i2c-i801.o
+obj-$(CONFIG_I2C_I810)		+= i2c-i810.o
+obj-$(CONFIG_I2C_IBM_IIC)	+= i2c-ibm_iic.o
+obj-$(CONFIG_I2C_IOP3XX)	+= i2c-iop3xx.o
+obj-$(CONFIG_I2C_ISA)		+= i2c-isa.o
+obj-$(CONFIG_I2C_ITE)		+= i2c-ite.o
+obj-$(CONFIG_I2C_IXP2000)	+= i2c-ixp2000.o
+obj-$(CONFIG_I2C_IXP4XX)	+= i2c-ixp4xx.o
+obj-$(CONFIG_I2C_KEYWEST)	+= i2c-keywest.o
+obj-$(CONFIG_I2C_MPC)		+= i2c-mpc.o
+obj-$(CONFIG_I2C_MV64XXX)	+= i2c-mv64xxx.o
+obj-$(CONFIG_I2C_NFORCE2)	+= i2c-nforce2.o
+obj-$(CONFIG_I2C_PARPORT)	+= i2c-parport.o
+obj-$(CONFIG_I2C_PARPORT_LIGHT)	+= i2c-parport-light.o
+obj-$(CONFIG_I2C_PCA_ISA)	+= i2c-pca-isa.o
+obj-$(CONFIG_I2C_PIIX4)		+= i2c-piix4.o
+obj-$(CONFIG_I2C_PROSAVAGE)	+= i2c-prosavage.o
+obj-$(CONFIG_I2C_RPXLITE)	+= i2c-rpx.o
+obj-$(CONFIG_I2C_S3C2410)	+= i2c-s3c2410.o
+obj-$(CONFIG_I2C_SAVAGE4)	+= i2c-savage4.o
+obj-$(CONFIG_I2C_SIBYTE)	+= i2c-sibyte.o
+obj-$(CONFIG_I2C_SIS5595)	+= i2c-sis5595.o
+obj-$(CONFIG_I2C_SIS630)	+= i2c-sis630.o
+obj-$(CONFIG_I2C_SIS96X)	+= i2c-sis96x.o
+obj-$(CONFIG_I2C_STUB)		+= i2c-stub.o
+obj-$(CONFIG_I2C_VIA)		+= i2c-via.o
+obj-$(CONFIG_I2C_VIAPRO)	+= i2c-viapro.o
+obj-$(CONFIG_I2C_VOODOO3)	+= i2c-voodoo3.o
+obj-$(CONFIG_SCx200_ACB)	+= scx200_acb.o
+obj-$(CONFIG_SCx200_I2C)	+= scx200_i2c.o
+
+ifeq ($(CONFIG_I2C_DEBUG_BUS),y)
+EXTRA_CFLAGS += -DDEBUG
+endif
diff --git a/drivers/i2c/busses/i2c-ali1535.c b/drivers/i2c/busses/i2c-ali1535.c
new file mode 100644
index 00000000000..b00cd409822
--- /dev/null
+++ b/drivers/i2c/busses/i2c-ali1535.c
@@ -0,0 +1,543 @@
+/*
+    i2c-ali1535.c - Part of lm_sensors, Linux kernel modules for hardware
+                    monitoring
+    Copyright (c) 2000  Frodo Looijaard <frodol@dds.nl>, 
+                        Philip Edelbrock <phil@netroedge.com>, 
+                        Mark D. Studebaker <mdsxyz123@yahoo.com>,
+                        Dan Eaton <dan.eaton@rocketlogix.com> and 
+                        Stephen Rousset<stephen.rousset@rocketlogix.com> 
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+/*
+    This is the driver for the SMB Host controller on
+    Acer Labs Inc. (ALI) M1535 South Bridge.
+
+    The M1535 is a South bridge for portable systems.
+    It is very similar to the M15x3 South bridges also produced
+    by Acer Labs Inc.  Some of the registers within the part
+    have moved and some have been redefined slightly. Additionally,
+    the sequencing of the SMBus transactions has been modified
+    to be more consistent with the sequencing recommended by
+    the manufacturer and observed through testing.  These
+    changes are reflected in this driver and can be identified
+    by comparing this driver to the i2c-ali15x3 driver.
+    For an overview of these chips see http://www.acerlabs.com
+
+    The SMB controller is part of the 7101 device, which is an
+    ACPI-compliant Power Management Unit (PMU).
+
+    The whole 7101 device has to be enabled for the SMB to work.
+    You can't just enable the SMB alone.
+    The SMB and the ACPI have separate I/O spaces.
+    We make sure that the SMB is enabled. We leave the ACPI alone.
+
+    This driver controls the SMB Host only.
+
+    This driver does not use interrupts.
+*/
+
+
+/* Note: we assume there can only be one ALI1535, with one SMBus interface */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/stddef.h>
+#include <linux/sched.h>
+#include <linux/delay.h>
+#include <linux/ioport.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <asm/io.h>
+#include <asm/semaphore.h>
+
+
+/* ALI1535 SMBus address offsets */
+#define SMBHSTSTS	(0 + ali1535_smba)
+#define SMBHSTTYP	(1 + ali1535_smba)
+#define SMBHSTPORT	(2 + ali1535_smba)
+#define SMBHSTCMD	(7 + ali1535_smba)
+#define SMBHSTADD	(3 + ali1535_smba)
+#define SMBHSTDAT0	(4 + ali1535_smba)
+#define SMBHSTDAT1	(5 + ali1535_smba)
+#define SMBBLKDAT	(6 + ali1535_smba)
+
+/* PCI Address Constants */
+#define SMBCOM		0x004
+#define SMBREV		0x008
+#define SMBCFG		0x0D1
+#define SMBBA		0x0E2
+#define SMBHSTCFG	0x0F0
+#define SMBCLK		0x0F2
+
+/* Other settings */
+#define MAX_TIMEOUT		500	/* times 1/100 sec */
+#define ALI1535_SMB_IOSIZE	32
+
+#define ALI1535_SMB_DEFAULTBASE	0x8040
+
+/* ALI1535 address lock bits */
+#define ALI1535_LOCK		0x06	/* dwe */
+
+/* ALI1535 command constants */
+#define ALI1535_QUICK		0x00
+#define ALI1535_BYTE		0x10
+#define ALI1535_BYTE_DATA	0x20
+#define ALI1535_WORD_DATA	0x30
+#define ALI1535_BLOCK_DATA	0x40
+#define ALI1535_I2C_READ	0x60
+
+#define	ALI1535_DEV10B_EN	0x80	/* Enable 10-bit addressing in	*/
+					/*  I2C read			*/
+#define	ALI1535_T_OUT		0x08	/* Time-out Command (write)	*/
+#define	ALI1535_A_HIGH_BIT9	0x08	/* Bit 9 of 10-bit address in	*/
+					/* Alert-Response-Address	*/
+					/* (read)			*/
+#define	ALI1535_KILL		0x04	/* Kill Command (write)		*/
+#define	ALI1535_A_HIGH_BIT8	0x04	/* Bit 8 of 10-bit address in	*/
+					/*  Alert-Response-Address	*/
+					/*  (read)			*/
+
+#define	ALI1535_D_HI_MASK	0x03	/* Mask for isolating bits 9-8	*/
+					/*  of 10-bit address in I2C	*/
+					/*  Read Command		*/
+
+/* ALI1535 status register bits */
+#define ALI1535_STS_IDLE	0x04
+#define ALI1535_STS_BUSY	0x08	/* host busy */
+#define ALI1535_STS_DONE	0x10	/* transaction complete */
+#define ALI1535_STS_DEV		0x20	/* device error */
+#define ALI1535_STS_BUSERR	0x40	/* bus error    */
+#define ALI1535_STS_FAIL	0x80	/* failed bus transaction */
+#define ALI1535_STS_ERR		0xE0	/* all the bad error bits */
+
+#define ALI1535_BLOCK_CLR	0x04	/* reset block data index */
+
+/* ALI1535 device address register bits */
+#define	ALI1535_RD_ADDR		0x01	/* Read/Write Bit in Device	*/
+					/*  Address field		*/
+					/*  -> Write = 0		*/
+					/*  -> Read  = 1		*/
+#define	ALI1535_SMBIO_EN	0x04	/* SMB I/O Space enable		*/
+
+
+static unsigned short ali1535_smba;
+static DECLARE_MUTEX(i2c_ali1535_sem);
+
+/* Detect whether a ALI1535 can be found, and initialize it, where necessary.
+   Note the differences between kernels with the old PCI BIOS interface and
+   newer kernels with the real PCI interface. In compat.h some things are
+   defined to make the transition easier. */
+static int ali1535_setup(struct pci_dev *dev)
+{
+	int retval = -ENODEV;
+	unsigned char temp;
+
+	/* Check the following things:
+		- SMB I/O address is initialized
+		- Device is enabled
+		- We can use the addresses
+	*/
+
+	/* Determine the address of the SMBus area */
+	pci_read_config_word(dev, SMBBA, &ali1535_smba);
+	ali1535_smba &= (0xffff & ~(ALI1535_SMB_IOSIZE - 1));
+	if (ali1535_smba == 0) {
+		dev_warn(&dev->dev,
+			"ALI1535_smb region uninitialized - upgrade BIOS?\n");
+		goto exit;
+	}
+
+	if (!request_region(ali1535_smba, ALI1535_SMB_IOSIZE, "ali1535-smb")) {
+		dev_err(&dev->dev, "ALI1535_smb region 0x%x already in use!\n",
+			ali1535_smba);
+		goto exit;
+	}
+
+	/* check if whole device is enabled */
+	pci_read_config_byte(dev, SMBCFG, &temp);
+	if ((temp & ALI1535_SMBIO_EN) == 0) {
+		dev_err(&dev->dev, "SMB device not enabled - upgrade BIOS?\n");
+		goto exit_free;
+	}
+
+	/* Is SMB Host controller enabled? */
+	pci_read_config_byte(dev, SMBHSTCFG, &temp);
+	if ((temp & 1) == 0) {
+		dev_err(&dev->dev, "SMBus controller not enabled - upgrade BIOS?\n");
+		goto exit_free;
+	}
+
+	/* set SMB clock to 74KHz as recommended in data sheet */
+	pci_write_config_byte(dev, SMBCLK, 0x20);
+
+	/*
+	  The interrupt routing for SMB is set up in register 0x77 in the
+	  1533 ISA Bridge device, NOT in the 7101 device.
+	  Don't bother with finding the 1533 device and reading the register.
+	if ((....... & 0x0F) == 1)
+		dev_dbg(&dev->dev, "ALI1535 using Interrupt 9 for SMBus.\n");
+	*/
+	pci_read_config_byte(dev, SMBREV, &temp);
+	dev_dbg(&dev->dev, "SMBREV = 0x%X\n", temp);
+	dev_dbg(&dev->dev, "ALI1535_smba = 0x%X\n", ali1535_smba);
+
+	retval = 0;
+exit:
+	return retval;
+
+exit_free:
+	release_region(ali1535_smba, ALI1535_SMB_IOSIZE);
+	return retval;
+}
+
+static int ali1535_transaction(struct i2c_adapter *adap)
+{
+	int temp;
+	int result = 0;
+	int timeout = 0;
+
+	dev_dbg(&adap->dev, "Transaction (pre): STS=%02x, TYP=%02x, "
+		"CMD=%02x, ADD=%02x, DAT0=%02x, DAT1=%02x\n",
+		inb_p(SMBHSTSTS), inb_p(SMBHSTTYP), inb_p(SMBHSTCMD),
+		inb_p(SMBHSTADD), inb_p(SMBHSTDAT0), inb_p(SMBHSTDAT1));
+
+	/* get status */
+	temp = inb_p(SMBHSTSTS);
+
+	/* Make sure the SMBus host is ready to start transmitting */
+	/* Check the busy bit first */
+	if (temp & ALI1535_STS_BUSY) {
+		/* If the host controller is still busy, it may have timed out
+		 * in the previous transaction, resulting in a "SMBus Timeout"
+		 * printk.  I've tried the following to reset a stuck busy bit.
+		 *   1. Reset the controller with an KILL command. (this
+		 *      doesn't seem to clear the controller if an external
+		 *      device is hung)
+		 *   2. Reset the controller and the other SMBus devices with a
+		 *      T_OUT command. (this clears the host busy bit if an
+		 *      external device is hung, but it comes back upon a new
+		 *      access to a device)
+		 *   3. Disable and reenable the controller in SMBHSTCFG. Worst
+		 *      case, nothing seems to work except power reset.
+		 */
+
+		/* Try resetting entire SMB bus, including other devices - This
+		 * may not work either - it clears the BUSY bit but then the
+		 * BUSY bit may come back on when you try and use the chip
+		 * again.  If that's the case you are stuck.
+		 */
+		dev_info(&adap->dev,
+			"Resetting entire SMB Bus to clear busy condition (%02x)\n",
+			temp);
+		outb_p(ALI1535_T_OUT, SMBHSTTYP);
+		temp = inb_p(SMBHSTSTS);
+	}
+
+	/* now check the error bits and the busy bit */
+	if (temp & (ALI1535_STS_ERR | ALI1535_STS_BUSY)) {
+		/* do a clear-on-write */
+		outb_p(0xFF, SMBHSTSTS);
+		if ((temp = inb_p(SMBHSTSTS)) &
+		    (ALI1535_STS_ERR | ALI1535_STS_BUSY)) {
+			/* This is probably going to be correctable only by a
+			 * power reset as one of the bits now appears to be
+			 * stuck */
+			/* This may be a bus or device with electrical problems. */
+			dev_err(&adap->dev,
+				"SMBus reset failed! (0x%02x) - controller or "
+				"device on bus is probably hung\n", temp);
+			return -1;
+		}
+	} else {
+		/* check and clear done bit */
+		if (temp & ALI1535_STS_DONE) {
+			outb_p(temp, SMBHSTSTS);
+		}
+	}
+
+	/* start the transaction by writing anything to the start register */
+	outb_p(0xFF, SMBHSTPORT);
+
+	/* We will always wait for a fraction of a second! */
+	timeout = 0;
+	do {
+		msleep(1);
+		temp = inb_p(SMBHSTSTS);
+	} while (((temp & ALI1535_STS_BUSY) && !(temp & ALI1535_STS_IDLE))
+		 && (timeout++ < MAX_TIMEOUT));
+
+	/* If the SMBus is still busy, we give up */
+	if (timeout >= MAX_TIMEOUT) {
+		result = -1;
+		dev_err(&adap->dev, "SMBus Timeout!\n");
+	}
+
+	if (temp & ALI1535_STS_FAIL) {
+		result = -1;
+		dev_dbg(&adap->dev, "Error: Failed bus transaction\n");
+	}
+
+	/* Unfortunately the ALI SMB controller maps "no response" and "bus
+	 * collision" into a single bit. No reponse is the usual case so don't
+	 * do a printk.  This means that bus collisions go unreported.
+	 */
+	if (temp & ALI1535_STS_BUSERR) {
+		result = -1;
+		dev_dbg(&adap->dev,
+			"Error: no response or bus collision ADD=%02x\n",
+			inb_p(SMBHSTADD));
+	}
+
+	/* haven't ever seen this */
+	if (temp & ALI1535_STS_DEV) {
+		result = -1;
+		dev_err(&adap->dev, "Error: device error\n");
+	}
+
+	/* check to see if the "command complete" indication is set */
+	if (!(temp & ALI1535_STS_DONE)) {
+		result = -1;
+		dev_err(&adap->dev, "Error: command never completed\n");
+	}
+
+	dev_dbg(&adap->dev, "Transaction (post): STS=%02x, TYP=%02x, "
+		"CMD=%02x, ADD=%02x, DAT0=%02x, DAT1=%02x\n",
+		inb_p(SMBHSTSTS), inb_p(SMBHSTTYP), inb_p(SMBHSTCMD),
+		inb_p(SMBHSTADD), inb_p(SMBHSTDAT0), inb_p(SMBHSTDAT1));
+
+	/* take consequent actions for error conditions */
+	if (!(temp & ALI1535_STS_DONE)) {
+		/* issue "kill" to reset host controller */
+		outb_p(ALI1535_KILL,SMBHSTTYP);
+		outb_p(0xFF,SMBHSTSTS);
+	} else if (temp & ALI1535_STS_ERR) {
+		/* issue "timeout" to reset all devices on bus */
+		outb_p(ALI1535_T_OUT,SMBHSTTYP);
+		outb_p(0xFF,SMBHSTSTS);
+	}
+
+	return result;
+}
+
+/* Return -1 on error. */
+static s32 ali1535_access(struct i2c_adapter *adap, u16 addr,
+			  unsigned short flags, char read_write, u8 command,
+			  int size, union i2c_smbus_data *data)
+{
+	int i, len;
+	int temp;
+	int timeout;
+	s32 result = 0;
+
+	down(&i2c_ali1535_sem);
+	/* make sure SMBus is idle */
+	temp = inb_p(SMBHSTSTS);
+	for (timeout = 0;
+	     (timeout < MAX_TIMEOUT) && !(temp & ALI1535_STS_IDLE);
+	     timeout++) {
+		msleep(1);
+		temp = inb_p(SMBHSTSTS);
+	}
+	if (timeout >= MAX_TIMEOUT)
+		dev_warn(&adap->dev, "Idle wait Timeout! STS=0x%02x\n", temp);
+
+	/* clear status register (clear-on-write) */
+	outb_p(0xFF, SMBHSTSTS);
+
+	switch (size) {
+	case I2C_SMBUS_PROC_CALL:
+		dev_err(&adap->dev, "I2C_SMBUS_PROC_CALL not supported!\n");
+		result = -1;
+		goto EXIT;
+	case I2C_SMBUS_QUICK:
+		outb_p(((addr & 0x7f) << 1) | (read_write & 0x01),
+		       SMBHSTADD);
+		size = ALI1535_QUICK;
+		outb_p(size, SMBHSTTYP);	/* output command */
+		break;
+	case I2C_SMBUS_BYTE:
+		outb_p(((addr & 0x7f) << 1) | (read_write & 0x01),
+		       SMBHSTADD);
+		size = ALI1535_BYTE;
+		outb_p(size, SMBHSTTYP);	/* output command */
+		if (read_write == I2C_SMBUS_WRITE)
+			outb_p(command, SMBHSTCMD);
+		break;
+	case I2C_SMBUS_BYTE_DATA:
+		outb_p(((addr & 0x7f) << 1) | (read_write & 0x01),
+		       SMBHSTADD);
+		size = ALI1535_BYTE_DATA;
+		outb_p(size, SMBHSTTYP);	/* output command */
+		outb_p(command, SMBHSTCMD);
+		if (read_write == I2C_SMBUS_WRITE)
+			outb_p(data->byte, SMBHSTDAT0);
+		break;
+	case I2C_SMBUS_WORD_DATA:
+		outb_p(((addr & 0x7f) << 1) | (read_write & 0x01),
+		       SMBHSTADD);
+		size = ALI1535_WORD_DATA;
+		outb_p(size, SMBHSTTYP);	/* output command */
+		outb_p(command, SMBHSTCMD);
+		if (read_write == I2C_SMBUS_WRITE) {
+			outb_p(data->word & 0xff, SMBHSTDAT0);
+			outb_p((data->word & 0xff00) >> 8, SMBHSTDAT1);
+		}
+		break;
+	case I2C_SMBUS_BLOCK_DATA:
+		outb_p(((addr & 0x7f) << 1) | (read_write & 0x01),
+		       SMBHSTADD);
+		size = ALI1535_BLOCK_DATA;
+		outb_p(size, SMBHSTTYP);	/* output command */
+		outb_p(command, SMBHSTCMD);
+		if (read_write == I2C_SMBUS_WRITE) {
+			len = data->block[0];
+			if (len < 0) {
+				len = 0;
+				data->block[0] = len;
+			}
+			if (len > 32) {
+				len = 32;
+				data->block[0] = len;
+			}
+			outb_p(len, SMBHSTDAT0);
+			/* Reset SMBBLKDAT */
+			outb_p(inb_p(SMBHSTTYP) | ALI1535_BLOCK_CLR, SMBHSTTYP);
+			for (i = 1; i <= len; i++)
+				outb_p(data->block[i], SMBBLKDAT);
+		}
+		break;
+	}
+
+	if (ali1535_transaction(adap)) {
+		/* Error in transaction */
+		result = -1;
+		goto EXIT;
+	}
+
+	if ((read_write == I2C_SMBUS_WRITE) || (size == ALI1535_QUICK)) {
+		result = 0;
+		goto EXIT;
+	}
+
+	switch (size) {
+	case ALI1535_BYTE:	/* Result put in SMBHSTDAT0 */
+		data->byte = inb_p(SMBHSTDAT0);
+		break;
+	case ALI1535_BYTE_DATA:
+		data->byte = inb_p(SMBHSTDAT0);
+		break;
+	case ALI1535_WORD_DATA:
+		data->word = inb_p(SMBHSTDAT0) + (inb_p(SMBHSTDAT1) << 8);
+		break;
+	case ALI1535_BLOCK_DATA:
+		len = inb_p(SMBHSTDAT0);
+		if (len > 32)
+			len = 32;
+		data->block[0] = len;
+		/* Reset SMBBLKDAT */
+		outb_p(inb_p(SMBHSTTYP) | ALI1535_BLOCK_CLR, SMBHSTTYP);
+		for (i = 1; i <= data->block[0]; i++) {
+			data->block[i] = inb_p(SMBBLKDAT);
+			dev_dbg(&adap->dev, "Blk: len=%d, i=%d, data=%02x\n",
+				len, i, data->block[i]);
+		}
+		break;
+	}
+EXIT:
+	up(&i2c_ali1535_sem);
+	return result;
+}
+
+
+static u32 ali1535_func(struct i2c_adapter *adapter)
+{
+	return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE |
+	    I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA |
+	    I2C_FUNC_SMBUS_BLOCK_DATA;
+}
+
+static struct i2c_algorithm smbus_algorithm = {
+	.name		= "Non-i2c SMBus adapter",
+	.id		= I2C_ALGO_SMBUS,
+	.smbus_xfer	= ali1535_access,
+	.functionality	= ali1535_func,
+};
+
+static struct i2c_adapter ali1535_adapter = {
+	.owner		= THIS_MODULE,
+	.class          = I2C_CLASS_HWMON,
+	.algo		= &smbus_algorithm,
+	.name		= "unset",
+};
+
+static struct pci_device_id ali1535_ids[] = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M7101) },
+	{ },
+};
+
+MODULE_DEVICE_TABLE (pci, ali1535_ids);
+
+static int __devinit ali1535_probe(struct pci_dev *dev, const struct pci_device_id *id)
+{
+	if (ali1535_setup(dev)) {
+		dev_warn(&dev->dev,
+			"ALI1535 not detected, module not inserted.\n");
+		return -ENODEV;
+	}
+
+	/* set up the driverfs linkage to our parent device */
+	ali1535_adapter.dev.parent = &dev->dev;
+
+	snprintf(ali1535_adapter.name, I2C_NAME_SIZE, 
+		"SMBus ALI1535 adapter at %04x", ali1535_smba);
+	return i2c_add_adapter(&ali1535_adapter);
+}
+
+static void __devexit ali1535_remove(struct pci_dev *dev)
+{
+	i2c_del_adapter(&ali1535_adapter);
+	release_region(ali1535_smba, ALI1535_SMB_IOSIZE);
+}
+
+static struct pci_driver ali1535_driver = {
+	.name		= "ali1535_smbus",
+	.id_table	= ali1535_ids,
+	.probe		= ali1535_probe,
+	.remove		= __devexit_p(ali1535_remove),
+};
+
+static int __init i2c_ali1535_init(void)
+{
+	return pci_register_driver(&ali1535_driver);
+}
+
+static void __exit i2c_ali1535_exit(void)
+{
+	pci_unregister_driver(&ali1535_driver);
+}
+
+MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl>, "
+	      "Philip Edelbrock <phil@netroedge.com>, "
+	      "Mark D. Studebaker <mdsxyz123@yahoo.com> "
+	      "and Dan Eaton <dan.eaton@rocketlogix.com>");
+MODULE_DESCRIPTION("ALI1535 SMBus driver");
+MODULE_LICENSE("GPL");
+
+module_init(i2c_ali1535_init);
+module_exit(i2c_ali1535_exit);
diff --git a/drivers/i2c/busses/i2c-ali1563.c b/drivers/i2c/busses/i2c-ali1563.c
new file mode 100644
index 00000000000..35710818fe4
--- /dev/null
+++ b/drivers/i2c/busses/i2c-ali1563.c
@@ -0,0 +1,415 @@
+/**
+ *	i2c-ali1563.c - i2c driver for the ALi 1563 Southbridge
+ *
+ *	Copyright (C) 2004 Patrick Mochel
+ *
+ *	The 1563 southbridge is deceptively similar to the 1533, with a
+ *	few notable exceptions. One of those happens to be the fact they
+ *	upgraded the i2c core to be 2.0 compliant, and happens to be almost
+ *	identical to the i2c controller found in the Intel 801 south
+ *	bridges.
+ *
+ *	This driver is based on a mix of the 15x3, 1535, and i801 drivers,
+ *	with a little help from the ALi 1563 spec.
+ *
+ *	This file is released under the GPLv2
+ */
+
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+
+#define ALI1563_MAX_TIMEOUT	500
+#define	ALI1563_SMBBA		0x80
+#define ALI1563_SMB_IOEN	1
+#define ALI1563_SMB_HOSTEN	2
+#define ALI1563_SMB_IOSIZE	16
+
+#define SMB_HST_STS	(ali1563_smba + 0)
+#define SMB_HST_CNTL1	(ali1563_smba + 1)
+#define SMB_HST_CNTL2	(ali1563_smba + 2)
+#define SMB_HST_CMD	(ali1563_smba + 3)
+#define SMB_HST_ADD	(ali1563_smba + 4)
+#define SMB_HST_DAT0	(ali1563_smba + 5)
+#define SMB_HST_DAT1	(ali1563_smba + 6)
+#define SMB_BLK_DAT	(ali1563_smba + 7)
+
+#define HST_STS_BUSY	0x01
+#define HST_STS_INTR	0x02
+#define HST_STS_DEVERR	0x04
+#define HST_STS_BUSERR	0x08
+#define HST_STS_FAIL	0x10
+#define HST_STS_DONE	0x80
+#define HST_STS_BAD	0x1c
+
+
+#define HST_CNTL1_TIMEOUT	0x80
+#define HST_CNTL1_LAST		0x40
+
+#define HST_CNTL2_KILL		0x04
+#define HST_CNTL2_START		0x40
+#define HST_CNTL2_QUICK		0x00
+#define HST_CNTL2_BYTE		0x01
+#define HST_CNTL2_BYTE_DATA	0x02
+#define HST_CNTL2_WORD_DATA	0x03
+#define HST_CNTL2_BLOCK		0x05
+
+
+
+static unsigned short ali1563_smba;
+
+static int ali1563_transaction(struct i2c_adapter * a)
+{
+	u32 data;
+	int timeout;
+
+	dev_dbg(&a->dev, "Transaction (pre): STS=%02x, CNTL1=%02x, "
+		"CNTL2=%02x, CMD=%02x, ADD=%02x, DAT0=%02x, DAT1=%02x\n",
+		inb_p(SMB_HST_STS), inb_p(SMB_HST_CNTL1), inb_p(SMB_HST_CNTL2),
+		inb_p(SMB_HST_CMD), inb_p(SMB_HST_ADD), inb_p(SMB_HST_DAT0),
+		inb_p(SMB_HST_DAT1));
+
+	data = inb_p(SMB_HST_STS);
+	if (data & HST_STS_BAD) {
+		dev_warn(&a->dev,"ali1563: Trying to reset busy device\n");
+		outb_p(data | HST_STS_BAD,SMB_HST_STS);
+		data = inb_p(SMB_HST_STS);
+		if (data & HST_STS_BAD)
+			return -EBUSY;
+	}
+	outb_p(inb_p(SMB_HST_CNTL2) | HST_CNTL2_START, SMB_HST_CNTL2);
+
+	timeout = ALI1563_MAX_TIMEOUT;
+	do
+		msleep(1);
+	while (((data = inb_p(SMB_HST_STS)) & HST_STS_BUSY) && --timeout);
+
+	dev_dbg(&a->dev, "Transaction (post): STS=%02x, CNTL1=%02x, "
+		"CNTL2=%02x, CMD=%02x, ADD=%02x, DAT0=%02x, DAT1=%02x\n",
+		inb_p(SMB_HST_STS), inb_p(SMB_HST_CNTL1), inb_p(SMB_HST_CNTL2),
+		inb_p(SMB_HST_CMD), inb_p(SMB_HST_ADD), inb_p(SMB_HST_DAT0),
+		inb_p(SMB_HST_DAT1));
+
+	if (timeout && !(data & HST_STS_BAD))
+		return 0;
+	dev_warn(&a->dev, "SMBus Error: %s%s%s%s%s\n",
+		timeout ? "Timeout " : "",
+		data & HST_STS_FAIL ? "Transaction Failed " : "",
+		data & HST_STS_BUSERR ? "No response or Bus Collision " : "",
+		data & HST_STS_DEVERR ? "Device Error " : "",
+		!(data & HST_STS_DONE) ? "Transaction Never Finished " : "");
+
+	if (!(data & HST_STS_DONE))
+		/* Issue 'kill' to host controller */
+		outb_p(HST_CNTL2_KILL,SMB_HST_CNTL2);
+	else
+		/* Issue timeout to reset all devices on bus */
+		outb_p(HST_CNTL1_TIMEOUT,SMB_HST_CNTL1);
+	return -1;
+}
+
+static int ali1563_block_start(struct i2c_adapter * a)
+{
+	u32 data;
+	int timeout;
+
+	dev_dbg(&a->dev, "Block (pre): STS=%02x, CNTL1=%02x, "
+		"CNTL2=%02x, CMD=%02x, ADD=%02x, DAT0=%02x, DAT1=%02x\n",
+		inb_p(SMB_HST_STS), inb_p(SMB_HST_CNTL1), inb_p(SMB_HST_CNTL2),
+		inb_p(SMB_HST_CMD), inb_p(SMB_HST_ADD), inb_p(SMB_HST_DAT0),
+		inb_p(SMB_HST_DAT1));
+
+	data = inb_p(SMB_HST_STS);
+	if (data & HST_STS_BAD) {
+		dev_warn(&a->dev,"ali1563: Trying to reset busy device\n");
+		outb_p(data | HST_STS_BAD,SMB_HST_STS);
+		data = inb_p(SMB_HST_STS);
+		if (data & HST_STS_BAD)
+			return -EBUSY;
+	}
+
+	/* Clear byte-ready bit */
+	outb_p(data | HST_STS_DONE, SMB_HST_STS);
+
+	/* Start transaction and wait for byte-ready bit to be set */
+	outb_p(inb_p(SMB_HST_CNTL2) | HST_CNTL2_START, SMB_HST_CNTL2);
+
+	timeout = ALI1563_MAX_TIMEOUT;
+	do
+		msleep(1);
+	while (!((data = inb_p(SMB_HST_STS)) & HST_STS_DONE) && --timeout);
+
+	dev_dbg(&a->dev, "Block (post): STS=%02x, CNTL1=%02x, "
+		"CNTL2=%02x, CMD=%02x, ADD=%02x, DAT0=%02x, DAT1=%02x\n",
+		inb_p(SMB_HST_STS), inb_p(SMB_HST_CNTL1), inb_p(SMB_HST_CNTL2),
+		inb_p(SMB_HST_CMD), inb_p(SMB_HST_ADD), inb_p(SMB_HST_DAT0),
+		inb_p(SMB_HST_DAT1));
+
+	if (timeout && !(data & HST_STS_BAD))
+		return 0;
+	dev_warn(&a->dev, "SMBus Error: %s%s%s%s%s\n",
+		timeout ? "Timeout " : "",
+		data & HST_STS_FAIL ? "Transaction Failed " : "",
+		data & HST_STS_BUSERR ? "No response or Bus Collision " : "",
+		data & HST_STS_DEVERR ? "Device Error " : "",
+		!(data & HST_STS_DONE) ? "Transaction Never Finished " : "");
+	return -1;
+}
+
+static int ali1563_block(struct i2c_adapter * a, union i2c_smbus_data * data, u8 rw)
+{
+	int i, len;
+	int error = 0;
+
+	/* Do we need this? */
+	outb_p(HST_CNTL1_LAST,SMB_HST_CNTL1);
+
+	if (rw == I2C_SMBUS_WRITE) {
+		len = data->block[0];
+		if (len < 1)
+			len = 1;
+		else if (len > 32)
+			len = 32;
+		outb_p(len,SMB_HST_DAT0);
+		outb_p(data->block[1],SMB_BLK_DAT);
+	} else
+		len = 32;
+
+	outb_p(inb_p(SMB_HST_CNTL2) | HST_CNTL2_BLOCK, SMB_HST_CNTL2);
+
+	for (i = 0; i < len; i++) {
+		if (rw == I2C_SMBUS_WRITE) {
+			outb_p(data->block[i + 1], SMB_BLK_DAT);
+			if ((error = ali1563_block_start(a)))
+				break;
+		} else {
+			if ((error = ali1563_block_start(a)))
+				break;
+			if (i == 0) {
+				len = inb_p(SMB_HST_DAT0);
+				if (len < 1)
+					len = 1;
+				else if (len > 32)
+					len = 32;
+			}
+			data->block[i+1] = inb_p(SMB_BLK_DAT);
+		}
+	}
+	/* Do we need this? */
+	outb_p(HST_CNTL1_LAST,SMB_HST_CNTL1);
+	return error;
+}
+
+static s32 ali1563_access(struct i2c_adapter * a, u16 addr,
+			  unsigned short flags, char rw, u8 cmd,
+			  int size, union i2c_smbus_data * data)
+{
+	int error = 0;
+	int timeout;
+	u32 reg;
+
+	for (timeout = ALI1563_MAX_TIMEOUT; timeout; timeout--) {
+		if (!(reg = inb_p(SMB_HST_STS) & HST_STS_BUSY))
+			break;
+	}
+	if (!timeout)
+		dev_warn(&a->dev,"SMBus not idle. HST_STS = %02x\n",reg);
+	outb_p(0xff,SMB_HST_STS);
+
+	/* Map the size to what the chip understands */
+	switch (size) {
+	case I2C_SMBUS_PROC_CALL:
+		dev_err(&a->dev, "I2C_SMBUS_PROC_CALL not supported!\n");
+		error = -EINVAL;
+		break;
+	case I2C_SMBUS_QUICK:
+		size = HST_CNTL2_QUICK;
+		break;
+	case I2C_SMBUS_BYTE:
+		size = HST_CNTL2_BYTE;
+		break;
+	case I2C_SMBUS_BYTE_DATA:
+		size = HST_CNTL2_BYTE_DATA;
+		break;
+	case I2C_SMBUS_WORD_DATA:
+		size = HST_CNTL2_WORD_DATA;
+		break;
+	case I2C_SMBUS_BLOCK_DATA:
+		size = HST_CNTL2_BLOCK;
+		break;
+	}
+
+	outb_p(((addr & 0x7f) << 1) | (rw & 0x01), SMB_HST_ADD);
+	outb_p(inb_p(SMB_HST_CNTL2) | (size << 3), SMB_HST_CNTL2);
+
+	/* Write the command register */
+	switch(size) {
+	case HST_CNTL2_BYTE:
+		if (rw== I2C_SMBUS_WRITE)
+			outb_p(cmd, SMB_HST_CMD);
+		break;
+	case HST_CNTL2_BYTE_DATA:
+		outb_p(cmd, SMB_HST_CMD);
+		if (rw == I2C_SMBUS_WRITE)
+			outb_p(data->byte, SMB_HST_DAT0);
+		break;
+	case HST_CNTL2_WORD_DATA:
+		outb_p(cmd, SMB_HST_CMD);
+		if (rw == I2C_SMBUS_WRITE) {
+			outb_p(data->word & 0xff, SMB_HST_DAT0);
+			outb_p((data->word & 0xff00) >> 8, SMB_HST_DAT1);
+		}
+		break;
+	case HST_CNTL2_BLOCK:
+		outb_p(cmd, SMB_HST_CMD);
+		error = ali1563_block(a,data,rw);
+		goto Done;
+	}
+
+	if ((error = ali1563_transaction(a)))
+		goto Done;
+
+	if ((rw == I2C_SMBUS_WRITE) || (size == HST_CNTL2_QUICK))
+		goto Done;
+
+	switch (size) {
+	case HST_CNTL2_BYTE:	/* Result put in SMBHSTDAT0 */
+		data->byte = inb_p(SMB_HST_DAT0);
+		break;
+	case HST_CNTL2_BYTE_DATA:
+		data->byte = inb_p(SMB_HST_DAT0);
+		break;
+	case HST_CNTL2_WORD_DATA:
+		data->word = inb_p(SMB_HST_DAT0) + (inb_p(SMB_HST_DAT1) << 8);
+		break;
+	}
+Done:
+	return error;
+}
+
+static u32 ali1563_func(struct i2c_adapter * a)
+{
+	return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE |
+	    I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA |
+	    I2C_FUNC_SMBUS_BLOCK_DATA;
+}
+
+
+static void ali1563_enable(struct pci_dev * dev)
+{
+	u16 ctrl;
+
+	pci_read_config_word(dev,ALI1563_SMBBA,&ctrl);
+	ctrl |= 0x7;
+	pci_write_config_word(dev,ALI1563_SMBBA,ctrl);
+}
+
+static int __devinit ali1563_setup(struct pci_dev * dev)
+{
+	u16 ctrl;
+
+	pci_read_config_word(dev,ALI1563_SMBBA,&ctrl);
+	printk("ali1563: SMBus control = %04x\n",ctrl);
+
+	/* Check if device is even enabled first */
+	if (!(ctrl & ALI1563_SMB_IOEN)) {
+		dev_warn(&dev->dev,"I/O space not enabled, trying manually\n");
+		ali1563_enable(dev);
+	}
+	if (!(ctrl & ALI1563_SMB_IOEN)) {
+		dev_warn(&dev->dev,"I/O space still not enabled, giving up\n");
+		goto Err;
+	}
+	if (!(ctrl & ALI1563_SMB_HOSTEN)) {
+		dev_warn(&dev->dev,"Host Controller not enabled\n");
+		goto Err;
+	}
+
+	/* SMB I/O Base in high 12 bits and must be aligned with the
+	 * size of the I/O space. */
+	ali1563_smba = ctrl & ~(ALI1563_SMB_IOSIZE - 1);
+	if (!ali1563_smba) {
+		dev_warn(&dev->dev,"ali1563_smba Uninitialized\n");
+		goto Err;
+	}
+	if (!request_region(ali1563_smba,ALI1563_SMB_IOSIZE,"i2c-ali1563")) {
+		dev_warn(&dev->dev,"Could not allocate I/O space");
+		goto Err;
+	}
+
+	return 0;
+Err:
+	return -ENODEV;
+}
+
+static void ali1563_shutdown(struct pci_dev *dev)
+{
+	release_region(ali1563_smba,ALI1563_SMB_IOSIZE);
+}
+
+static struct i2c_algorithm ali1563_algorithm = {
+	.name		= "Non-i2c SMBus adapter",
+	.id		= I2C_ALGO_SMBUS,
+	.smbus_xfer	= ali1563_access,
+	.functionality	= ali1563_func,
+};
+
+static struct i2c_adapter ali1563_adapter = {
+	.owner	= THIS_MODULE,
+	.class	= I2C_CLASS_HWMON,
+	.algo	= &ali1563_algorithm,
+};
+
+static int __devinit ali1563_probe(struct pci_dev * dev,
+				const struct pci_device_id * id_table)
+{
+	int error;
+
+	if ((error = ali1563_setup(dev)))
+		return error;
+	ali1563_adapter.dev.parent = &dev->dev;
+	sprintf(ali1563_adapter.name,"SMBus ALi 1563 Adapter @ %04x",
+		ali1563_smba);
+	if ((error = i2c_add_adapter(&ali1563_adapter)))
+		ali1563_shutdown(dev);
+	printk("%s: Returning %d\n",__FUNCTION__,error);
+	return error;
+}
+
+static void __devexit ali1563_remove(struct pci_dev * dev)
+{
+	i2c_del_adapter(&ali1563_adapter);
+	ali1563_shutdown(dev);
+}
+
+static struct pci_device_id __devinitdata ali1563_id_table[] = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1563) },
+	{},
+};
+
+MODULE_DEVICE_TABLE (pci, ali1563_id_table);
+
+static struct pci_driver ali1563_pci_driver = {
+ 	.name		= "ali1563_i2c",
+	.id_table	= ali1563_id_table,
+ 	.probe		= ali1563_probe,
+	.remove		= __devexit_p(ali1563_remove),
+};
+
+static int __init ali1563_init(void)
+{
+	return pci_register_driver(&ali1563_pci_driver);
+}
+
+module_init(ali1563_init);
+
+static void __exit ali1563_exit(void)
+{
+	pci_unregister_driver(&ali1563_pci_driver);
+}
+
+module_exit(ali1563_exit);
+
+MODULE_LICENSE("GPL");
diff --git a/drivers/i2c/busses/i2c-ali15x3.c b/drivers/i2c/busses/i2c-ali15x3.c
new file mode 100644
index 00000000000..5bd6a4a77c1
--- /dev/null
+++ b/drivers/i2c/busses/i2c-ali15x3.c
@@ -0,0 +1,532 @@
+/*
+    ali15x3.c - Part of lm_sensors, Linux kernel modules for hardware
+              monitoring
+    Copyright (c) 1999  Frodo Looijaard <frodol@dds.nl> and
+    Philip Edelbrock <phil@netroedge.com> and
+    Mark D. Studebaker <mdsxyz123@yahoo.com>
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+/*
+    This is the driver for the SMB Host controller on
+    Acer Labs Inc. (ALI) M1541 and M1543C South Bridges.
+
+    The M1543C is a South bridge for desktop systems.
+    The M1533 is a South bridge for portable systems.
+    They are part of the following ALI chipsets:
+       "Aladdin Pro 2": Includes the M1621 Slot 1 North bridge
+       with AGP and 100MHz CPU Front Side bus
+       "Aladdin V": Includes the M1541 Socket 7 North bridge
+       with AGP and 100MHz CPU Front Side bus
+       "Aladdin IV": Includes the M1541 Socket 7 North bridge
+       with host bus up to 83.3 MHz.
+    For an overview of these chips see http://www.acerlabs.com
+
+    The M1533/M1543C devices appear as FOUR separate devices
+    on the PCI bus. An output of lspci will show something similar
+    to the following:
+
+	00:02.0 USB Controller: Acer Laboratories Inc. M5237
+	00:03.0 Bridge: Acer Laboratories Inc. M7101
+	00:07.0 ISA bridge: Acer Laboratories Inc. M1533
+	00:0f.0 IDE interface: Acer Laboratories Inc. M5229
+
+    The SMB controller is part of the 7101 device, which is an
+    ACPI-compliant Power Management Unit (PMU).
+
+    The whole 7101 device has to be enabled for the SMB to work.
+    You can't just enable the SMB alone.
+    The SMB and the ACPI have separate I/O spaces.
+    We make sure that the SMB is enabled. We leave the ACPI alone.
+
+    This driver controls the SMB Host only.
+    The SMB Slave controller on the M15X3 is not enabled.
+
+    This driver does not use interrupts.
+*/
+
+/* Note: we assume there can only be one ALI15X3, with one SMBus interface */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/stddef.h>
+#include <linux/sched.h>
+#include <linux/ioport.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <asm/io.h>
+
+/* ALI15X3 SMBus address offsets */
+#define SMBHSTSTS	(0 + ali15x3_smba)
+#define SMBHSTCNT	(1 + ali15x3_smba)
+#define SMBHSTSTART	(2 + ali15x3_smba)
+#define SMBHSTCMD	(7 + ali15x3_smba)
+#define SMBHSTADD	(3 + ali15x3_smba)
+#define SMBHSTDAT0	(4 + ali15x3_smba)
+#define SMBHSTDAT1	(5 + ali15x3_smba)
+#define SMBBLKDAT	(6 + ali15x3_smba)
+
+/* PCI Address Constants */
+#define SMBCOM		0x004
+#define SMBBA		0x014
+#define SMBATPC		0x05B	/* used to unlock xxxBA registers */
+#define SMBHSTCFG	0x0E0
+#define SMBSLVC		0x0E1
+#define SMBCLK		0x0E2
+#define SMBREV		0x008
+
+/* Other settings */
+#define MAX_TIMEOUT		200	/* times 1/100 sec */
+#define ALI15X3_SMB_IOSIZE	32
+
+/* this is what the Award 1004 BIOS sets them to on a ASUS P5A MB.
+   We don't use these here. If the bases aren't set to some value we
+   tell user to upgrade BIOS and we fail.
+*/
+#define ALI15X3_SMB_DEFAULTBASE	0xE800
+
+/* ALI15X3 address lock bits */
+#define ALI15X3_LOCK		0x06
+
+/* ALI15X3 command constants */
+#define ALI15X3_ABORT		0x02
+#define ALI15X3_T_OUT		0x04
+#define ALI15X3_QUICK		0x00
+#define ALI15X3_BYTE		0x10
+#define ALI15X3_BYTE_DATA	0x20
+#define ALI15X3_WORD_DATA	0x30
+#define ALI15X3_BLOCK_DATA	0x40
+#define ALI15X3_BLOCK_CLR	0x80
+
+/* ALI15X3 status register bits */
+#define ALI15X3_STS_IDLE	0x04
+#define ALI15X3_STS_BUSY	0x08
+#define ALI15X3_STS_DONE	0x10
+#define ALI15X3_STS_DEV		0x20	/* device error */
+#define ALI15X3_STS_COLL	0x40	/* collision or no response */
+#define ALI15X3_STS_TERM	0x80	/* terminated by abort */
+#define ALI15X3_STS_ERR		0xE0	/* all the bad error bits */
+
+
+/* If force_addr is set to anything different from 0, we forcibly enable
+   the device at the given address. */
+static u16 force_addr = 0;
+module_param(force_addr, ushort, 0);
+MODULE_PARM_DESC(force_addr,
+		 "Initialize the base address of the i2c controller");
+
+static unsigned short ali15x3_smba = 0;
+
+static int ali15x3_setup(struct pci_dev *ALI15X3_dev)
+{
+	u16 a;
+	unsigned char temp;
+
+	/* Check the following things:
+		- SMB I/O address is initialized
+		- Device is enabled
+		- We can use the addresses
+	*/
+
+	/* Unlock the register.
+	   The data sheet says that the address registers are read-only
+	   if the lock bits are 1, but in fact the address registers
+	   are zero unless you clear the lock bits.
+	*/
+	pci_read_config_byte(ALI15X3_dev, SMBATPC, &temp);
+	if (temp & ALI15X3_LOCK) {
+		temp &= ~ALI15X3_LOCK;
+		pci_write_config_byte(ALI15X3_dev, SMBATPC, temp);
+	}
+
+	/* Determine the address of the SMBus area */
+	pci_read_config_word(ALI15X3_dev, SMBBA, &ali15x3_smba);
+	ali15x3_smba &= (0xffff & ~(ALI15X3_SMB_IOSIZE - 1));
+	if (ali15x3_smba == 0 && force_addr == 0) {
+		dev_err(&ALI15X3_dev->dev, "ALI15X3_smb region uninitialized "
+			"- upgrade BIOS or use force_addr=0xaddr\n");
+		return -ENODEV;
+	}
+
+	if(force_addr)
+		ali15x3_smba = force_addr & ~(ALI15X3_SMB_IOSIZE - 1);
+
+	if (!request_region(ali15x3_smba, ALI15X3_SMB_IOSIZE, "ali15x3-smb")) {
+		dev_err(&ALI15X3_dev->dev,
+			"ALI15X3_smb region 0x%x already in use!\n",
+			ali15x3_smba);
+		return -ENODEV;
+	}
+
+	if(force_addr) {
+		dev_info(&ALI15X3_dev->dev, "forcing ISA address 0x%04X\n",
+			ali15x3_smba);
+		if (PCIBIOS_SUCCESSFUL != pci_write_config_word(ALI15X3_dev,
+								SMBBA,
+								ali15x3_smba))
+			goto error;
+		if (PCIBIOS_SUCCESSFUL != pci_read_config_word(ALI15X3_dev,
+								SMBBA, &a))
+			goto error;
+		if ((a & ~(ALI15X3_SMB_IOSIZE - 1)) != ali15x3_smba) {
+			/* make sure it works */
+			dev_err(&ALI15X3_dev->dev,
+				"force address failed - not supported?\n");
+			goto error;
+		}
+	}
+	/* check if whole device is enabled */
+	pci_read_config_byte(ALI15X3_dev, SMBCOM, &temp);
+	if ((temp & 1) == 0) {
+		dev_info(&ALI15X3_dev->dev, "enabling SMBus device\n");
+		pci_write_config_byte(ALI15X3_dev, SMBCOM, temp | 0x01);
+	}
+
+	/* Is SMB Host controller enabled? */
+	pci_read_config_byte(ALI15X3_dev, SMBHSTCFG, &temp);
+	if ((temp & 1) == 0) {
+		dev_info(&ALI15X3_dev->dev, "enabling SMBus controller\n");
+		pci_write_config_byte(ALI15X3_dev, SMBHSTCFG, temp | 0x01);
+	}
+
+	/* set SMB clock to 74KHz as recommended in data sheet */
+	pci_write_config_byte(ALI15X3_dev, SMBCLK, 0x20);
+
+	/*
+	  The interrupt routing for SMB is set up in register 0x77 in the
+	  1533 ISA Bridge device, NOT in the 7101 device.
+	  Don't bother with finding the 1533 device and reading the register.
+	if ((....... & 0x0F) == 1)
+		dev_dbg(&ALI15X3_dev->dev, "ALI15X3 using Interrupt 9 for SMBus.\n");
+	*/
+	pci_read_config_byte(ALI15X3_dev, SMBREV, &temp);
+	dev_dbg(&ALI15X3_dev->dev, "SMBREV = 0x%X\n", temp);
+	dev_dbg(&ALI15X3_dev->dev, "iALI15X3_smba = 0x%X\n", ali15x3_smba);
+
+	return 0;
+error:
+	release_region(ali15x3_smba, ALI15X3_SMB_IOSIZE);
+	return -ENODEV;
+}
+
+/* Another internally used function */
+static int ali15x3_transaction(struct i2c_adapter *adap)
+{
+	int temp;
+	int result = 0;
+	int timeout = 0;
+
+	dev_dbg(&adap->dev, "Transaction (pre): STS=%02x, CNT=%02x, CMD=%02x, "
+		"ADD=%02x, DAT0=%02x, DAT1=%02x\n", inb_p(SMBHSTSTS),
+		inb_p(SMBHSTCNT), inb_p(SMBHSTCMD), inb_p(SMBHSTADD),
+		inb_p(SMBHSTDAT0), inb_p(SMBHSTDAT1));
+
+	/* get status */
+	temp = inb_p(SMBHSTSTS);
+
+	/* Make sure the SMBus host is ready to start transmitting */
+	/* Check the busy bit first */
+	if (temp & ALI15X3_STS_BUSY) {
+	/*
+	   If the host controller is still busy, it may have timed out in the
+	   previous transaction, resulting in a "SMBus Timeout" Dev.
+	   I've tried the following to reset a stuck busy bit.
+		1. Reset the controller with an ABORT command.
+		   (this doesn't seem to clear the controller if an external
+		   device is hung)
+		2. Reset the controller and the other SMBus devices with a
+		   T_OUT command.  (this clears the host busy bit if an
+		   external device is hung, but it comes back upon a new access
+		   to a device)
+		3. Disable and reenable the controller in SMBHSTCFG
+	   Worst case, nothing seems to work except power reset.
+	*/
+	/* Abort - reset the host controller */
+	/*
+	   Try resetting entire SMB bus, including other devices -
+	   This may not work either - it clears the BUSY bit but
+	   then the BUSY bit may come back on when you try and use the chip again.
+	   If that's the case you are stuck.
+	*/
+		dev_info(&adap->dev, "Resetting entire SMB Bus to "
+			"clear busy condition (%02x)\n", temp);
+		outb_p(ALI15X3_T_OUT, SMBHSTCNT);
+		temp = inb_p(SMBHSTSTS);
+	}
+
+	/* now check the error bits and the busy bit */
+	if (temp & (ALI15X3_STS_ERR | ALI15X3_STS_BUSY)) {
+		/* do a clear-on-write */
+		outb_p(0xFF, SMBHSTSTS);
+		if ((temp = inb_p(SMBHSTSTS)) &
+		    (ALI15X3_STS_ERR | ALI15X3_STS_BUSY)) {
+			/* this is probably going to be correctable only by a power reset
+			   as one of the bits now appears to be stuck */
+			/* This may be a bus or device with electrical problems. */
+			dev_err(&adap->dev, "SMBus reset failed! (0x%02x) - "
+				"controller or device on bus is probably hung\n",
+				temp);
+			return -1;
+		}
+	} else {
+		/* check and clear done bit */
+		if (temp & ALI15X3_STS_DONE) {
+			outb_p(temp, SMBHSTSTS);
+		}
+	}
+
+	/* start the transaction by writing anything to the start register */
+	outb_p(0xFF, SMBHSTSTART);
+
+	/* We will always wait for a fraction of a second! */
+	timeout = 0;
+	do {
+		msleep(1);
+		temp = inb_p(SMBHSTSTS);
+	} while ((!(temp & (ALI15X3_STS_ERR | ALI15X3_STS_DONE)))
+		 && (timeout++ < MAX_TIMEOUT));
+
+	/* If the SMBus is still busy, we give up */
+	if (timeout >= MAX_TIMEOUT) {
+		result = -1;
+		dev_err(&adap->dev, "SMBus Timeout!\n");
+	}
+
+	if (temp & ALI15X3_STS_TERM) {
+		result = -1;
+		dev_dbg(&adap->dev, "Error: Failed bus transaction\n");
+	}
+
+	/*
+	  Unfortunately the ALI SMB controller maps "no response" and "bus
+	  collision" into a single bit. No reponse is the usual case so don't
+	  do a printk.
+	  This means that bus collisions go unreported.
+	*/
+	if (temp & ALI15X3_STS_COLL) {
+		result = -1;
+		dev_dbg(&adap->dev,
+			"Error: no response or bus collision ADD=%02x\n",
+			inb_p(SMBHSTADD));
+	}
+
+	/* haven't ever seen this */
+	if (temp & ALI15X3_STS_DEV) {
+		result = -1;
+		dev_err(&adap->dev, "Error: device error\n");
+	}
+	dev_dbg(&adap->dev, "Transaction (post): STS=%02x, CNT=%02x, CMD=%02x, "
+		"ADD=%02x, DAT0=%02x, DAT1=%02x\n", inb_p(SMBHSTSTS),
+		inb_p(SMBHSTCNT), inb_p(SMBHSTCMD), inb_p(SMBHSTADD),
+		inb_p(SMBHSTDAT0), inb_p(SMBHSTDAT1));
+	return result;
+}
+
+/* Return -1 on error. */
+static s32 ali15x3_access(struct i2c_adapter * adap, u16 addr,
+		   unsigned short flags, char read_write, u8 command,
+		   int size, union i2c_smbus_data * data)
+{
+	int i, len;
+	int temp;
+	int timeout;
+
+	/* clear all the bits (clear-on-write) */
+	outb_p(0xFF, SMBHSTSTS);
+	/* make sure SMBus is idle */
+	temp = inb_p(SMBHSTSTS);
+	for (timeout = 0;
+	     (timeout < MAX_TIMEOUT) && !(temp & ALI15X3_STS_IDLE);
+	     timeout++) {
+		msleep(1);
+		temp = inb_p(SMBHSTSTS);
+	}
+	if (timeout >= MAX_TIMEOUT) {
+		dev_err(&adap->dev, "Idle wait Timeout! STS=0x%02x\n", temp);
+	}
+
+	switch (size) {
+	case I2C_SMBUS_PROC_CALL:
+		dev_err(&adap->dev, "I2C_SMBUS_PROC_CALL not supported!\n");
+		return -1;
+	case I2C_SMBUS_QUICK:
+		outb_p(((addr & 0x7f) << 1) | (read_write & 0x01),
+		       SMBHSTADD);
+		size = ALI15X3_QUICK;
+		break;
+	case I2C_SMBUS_BYTE:
+		outb_p(((addr & 0x7f) << 1) | (read_write & 0x01),
+		       SMBHSTADD);
+		if (read_write == I2C_SMBUS_WRITE)
+			outb_p(command, SMBHSTCMD);
+		size = ALI15X3_BYTE;
+		break;
+	case I2C_SMBUS_BYTE_DATA:
+		outb_p(((addr & 0x7f) << 1) | (read_write & 0x01),
+		       SMBHSTADD);
+		outb_p(command, SMBHSTCMD);
+		if (read_write == I2C_SMBUS_WRITE)
+			outb_p(data->byte, SMBHSTDAT0);
+		size = ALI15X3_BYTE_DATA;
+		break;
+	case I2C_SMBUS_WORD_DATA:
+		outb_p(((addr & 0x7f) << 1) | (read_write & 0x01),
+		       SMBHSTADD);
+		outb_p(command, SMBHSTCMD);
+		if (read_write == I2C_SMBUS_WRITE) {
+			outb_p(data->word & 0xff, SMBHSTDAT0);
+			outb_p((data->word & 0xff00) >> 8, SMBHSTDAT1);
+		}
+		size = ALI15X3_WORD_DATA;
+		break;
+	case I2C_SMBUS_BLOCK_DATA:
+		outb_p(((addr & 0x7f) << 1) | (read_write & 0x01),
+		       SMBHSTADD);
+		outb_p(command, SMBHSTCMD);
+		if (read_write == I2C_SMBUS_WRITE) {
+			len = data->block[0];
+			if (len < 0) {
+				len = 0;
+				data->block[0] = len;
+			}
+			if (len > 32) {
+				len = 32;
+				data->block[0] = len;
+			}
+			outb_p(len, SMBHSTDAT0);
+			/* Reset SMBBLKDAT */
+			outb_p(inb_p(SMBHSTCNT) | ALI15X3_BLOCK_CLR, SMBHSTCNT);
+			for (i = 1; i <= len; i++)
+				outb_p(data->block[i], SMBBLKDAT);
+		}
+		size = ALI15X3_BLOCK_DATA;
+		break;
+	}
+
+	outb_p(size, SMBHSTCNT);	/* output command */
+
+	if (ali15x3_transaction(adap))	/* Error in transaction */
+		return -1;
+
+	if ((read_write == I2C_SMBUS_WRITE) || (size == ALI15X3_QUICK))
+		return 0;
+
+
+	switch (size) {
+	case ALI15X3_BYTE:	/* Result put in SMBHSTDAT0 */
+		data->byte = inb_p(SMBHSTDAT0);
+		break;
+	case ALI15X3_BYTE_DATA:
+		data->byte = inb_p(SMBHSTDAT0);
+		break;
+	case ALI15X3_WORD_DATA:
+		data->word = inb_p(SMBHSTDAT0) + (inb_p(SMBHSTDAT1) << 8);
+		break;
+	case ALI15X3_BLOCK_DATA:
+		len = inb_p(SMBHSTDAT0);
+		if (len > 32)
+			len = 32;
+		data->block[0] = len;
+		/* Reset SMBBLKDAT */
+		outb_p(inb_p(SMBHSTCNT) | ALI15X3_BLOCK_CLR, SMBHSTCNT);
+		for (i = 1; i <= data->block[0]; i++) {
+			data->block[i] = inb_p(SMBBLKDAT);
+			dev_dbg(&adap->dev, "Blk: len=%d, i=%d, data=%02x\n",
+				len, i, data->block[i]);
+		}
+		break;
+	}
+	return 0;
+}
+
+static u32 ali15x3_func(struct i2c_adapter *adapter)
+{
+	return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE |
+	    I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA |
+	    I2C_FUNC_SMBUS_BLOCK_DATA;
+}
+
+static struct i2c_algorithm smbus_algorithm = {
+	.name		= "Non-I2C SMBus adapter",
+	.id		= I2C_ALGO_SMBUS,
+	.smbus_xfer	= ali15x3_access,
+	.functionality	= ali15x3_func,
+};
+
+static struct i2c_adapter ali15x3_adapter = {
+	.owner		= THIS_MODULE,
+	.class          = I2C_CLASS_HWMON,
+	.algo		= &smbus_algorithm,
+	.name		= "unset",
+};
+
+static struct pci_device_id ali15x3_ids[] = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M7101) },
+	{ 0, }
+};
+
+MODULE_DEVICE_TABLE (pci, ali15x3_ids);
+
+static int __devinit ali15x3_probe(struct pci_dev *dev, const struct pci_device_id *id)
+{
+	if (ali15x3_setup(dev)) {
+		dev_err(&dev->dev,
+			"ALI15X3 not detected, module not inserted.\n");
+		return -ENODEV;
+	}
+
+	/* set up the driverfs linkage to our parent device */
+	ali15x3_adapter.dev.parent = &dev->dev;
+
+	snprintf(ali15x3_adapter.name, I2C_NAME_SIZE,
+		"SMBus ALI15X3 adapter at %04x", ali15x3_smba);
+	return i2c_add_adapter(&ali15x3_adapter);
+}
+
+static void __devexit ali15x3_remove(struct pci_dev *dev)
+{
+	i2c_del_adapter(&ali15x3_adapter);
+	release_region(ali15x3_smba, ALI15X3_SMB_IOSIZE);
+}
+
+static struct pci_driver ali15x3_driver = {
+	.name		= "ali15x3_smbus",
+	.id_table	= ali15x3_ids,
+	.probe		= ali15x3_probe,
+	.remove		= __devexit_p(ali15x3_remove),
+};
+
+static int __init i2c_ali15x3_init(void)
+{
+	return pci_register_driver(&ali15x3_driver);
+}
+
+static void __exit i2c_ali15x3_exit(void)
+{
+	pci_unregister_driver(&ali15x3_driver);
+}
+
+MODULE_AUTHOR ("Frodo Looijaard <frodol@dds.nl>, "
+		"Philip Edelbrock <phil@netroedge.com>, "
+		"and Mark D. Studebaker <mdsxyz123@yahoo.com>");
+MODULE_DESCRIPTION("ALI15X3 SMBus driver");
+MODULE_LICENSE("GPL");
+
+module_init(i2c_ali15x3_init);
+module_exit(i2c_ali15x3_exit);
diff --git a/drivers/i2c/busses/i2c-amd756-s4882.c b/drivers/i2c/busses/i2c-amd756-s4882.c
new file mode 100644
index 00000000000..4e553e8c5cb
--- /dev/null
+++ b/drivers/i2c/busses/i2c-amd756-s4882.c
@@ -0,0 +1,264 @@
+/*
+ * i2c-amd756-s4882.c - i2c-amd756 extras for the Tyan S4882 motherboard
+ *
+ * Copyright (C) 2004 Jean Delvare <khali@linux-fr.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+ 
+/*
+ * We select the channels by sending commands to the Philips
+ * PCA9556 chip at I2C address 0x18. The main adapter is used for
+ * the non-multiplexed part of the bus, and 4 virtual adapters
+ * are defined for the multiplexed addresses: 0x50-0x53 (memory
+ * module EEPROM) located on channels 1-4, and 0x4c (LM63)
+ * located on multiplexed channels 0 and 5-7. We define one
+ * virtual adapter per CPU, which corresponds to two multiplexed
+ * channels:
+ *   CPU0: virtual adapter 1, channels 1 and 0
+ *   CPU1: virtual adapter 2, channels 2 and 5
+ *   CPU2: virtual adapter 3, channels 3 and 6
+ *   CPU3: virtual adapter 4, channels 4 and 7
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/i2c.h>
+
+extern struct i2c_adapter amd756_smbus;
+
+static struct i2c_adapter *s4882_adapter;
+static struct i2c_algorithm *s4882_algo;
+
+/* Wrapper access functions for multiplexed SMBus */
+static struct semaphore amd756_lock;
+
+static s32 amd756_access_virt0(struct i2c_adapter * adap, u16 addr,
+			       unsigned short flags, char read_write,
+			       u8 command, int size,
+			       union i2c_smbus_data * data)
+{
+	int error;
+
+	/* We exclude the multiplexed addresses */
+	if (addr == 0x4c || (addr & 0xfc) == 0x50 || (addr & 0xfc) == 0x30
+	 || addr == 0x18)
+		return -1;
+
+	down(&amd756_lock);
+
+	error = amd756_smbus.algo->smbus_xfer(adap, addr, flags, read_write,
+					      command, size, data);
+
+	up(&amd756_lock);
+
+	return error;
+}
+
+/* We remember the last used channels combination so as to only switch
+   channels when it is really needed. This greatly reduces the SMBus
+   overhead, but also assumes that nobody will be writing to the PCA9556
+   in our back. */
+static u8 last_channels;
+
+static inline s32 amd756_access_channel(struct i2c_adapter * adap, u16 addr,
+					unsigned short flags, char read_write,
+					u8 command, int size,
+					union i2c_smbus_data * data,
+					u8 channels)
+{
+	int error;
+
+	/* We exclude the non-multiplexed addresses */
+	if (addr != 0x4c && (addr & 0xfc) != 0x50 && (addr & 0xfc) != 0x30)
+		return -1;
+
+	down(&amd756_lock);
+
+	if (last_channels != channels) {
+		union i2c_smbus_data mplxdata;
+		mplxdata.byte = channels;
+
+		error = amd756_smbus.algo->smbus_xfer(adap, 0x18, 0,
+						      I2C_SMBUS_WRITE, 0x01,
+						      I2C_SMBUS_BYTE_DATA,
+						      &mplxdata);
+		if (error)
+			goto UNLOCK;
+		last_channels = channels;
+	}
+	error = amd756_smbus.algo->smbus_xfer(adap, addr, flags, read_write,
+					      command, size, data);
+
+UNLOCK:
+	up(&amd756_lock);
+	return error;
+}
+
+static s32 amd756_access_virt1(struct i2c_adapter * adap, u16 addr,
+			       unsigned short flags, char read_write,
+			       u8 command, int size,
+			       union i2c_smbus_data * data)
+{
+	/* CPU0: channels 1 and 0 enabled */
+	return amd756_access_channel(adap, addr, flags, read_write, command,
+				     size, data, 0x03);
+}
+
+static s32 amd756_access_virt2(struct i2c_adapter * adap, u16 addr,
+			       unsigned short flags, char read_write,
+			       u8 command, int size,
+			       union i2c_smbus_data * data)
+{
+	/* CPU1: channels 2 and 5 enabled */
+	return amd756_access_channel(adap, addr, flags, read_write, command,
+				     size, data, 0x24);
+}
+
+static s32 amd756_access_virt3(struct i2c_adapter * adap, u16 addr,
+			       unsigned short flags, char read_write,
+			       u8 command, int size,
+			       union i2c_smbus_data * data)
+{
+	/* CPU2: channels 3 and 6 enabled */
+	return amd756_access_channel(adap, addr, flags, read_write, command,
+				     size, data, 0x48);
+}
+
+static s32 amd756_access_virt4(struct i2c_adapter * adap, u16 addr,
+			       unsigned short flags, char read_write,
+			       u8 command, int size,
+			       union i2c_smbus_data * data)
+{
+	/* CPU3: channels 4 and 7 enabled */
+	return amd756_access_channel(adap, addr, flags, read_write, command,
+				     size, data, 0x90);
+}
+
+static int __init amd756_s4882_init(void)
+{
+	int i, error;
+	union i2c_smbus_data ioconfig;
+
+	/* Unregister physical bus */
+	error = i2c_del_adapter(&amd756_smbus);
+	if (error) {
+		if (error == -EINVAL)
+			error = -ENODEV;
+		else
+			dev_err(&amd756_smbus.dev, "Physical bus removal "
+				"failed\n");
+		goto ERROR0;
+	}
+
+	printk(KERN_INFO "Enabling SMBus multiplexing for Tyan S4882\n");
+	init_MUTEX(&amd756_lock);
+
+	/* Define the 5 virtual adapters and algorithms structures */
+	if (!(s4882_adapter = kmalloc(5 * sizeof(struct i2c_adapter),
+				      GFP_KERNEL))) {
+		error = -ENOMEM;
+		goto ERROR1;
+	}
+	if (!(s4882_algo = kmalloc(5 * sizeof(struct i2c_algorithm),
+				   GFP_KERNEL))) {
+		error = -ENOMEM;
+		goto ERROR2;
+	}
+
+	/* Fill in the new structures */
+	s4882_algo[0] = *(amd756_smbus.algo);
+	s4882_algo[0].smbus_xfer = amd756_access_virt0;
+	s4882_adapter[0] = amd756_smbus;
+	s4882_adapter[0].algo = s4882_algo;
+	for (i = 1; i < 5; i++) {
+		s4882_algo[i] = *(amd756_smbus.algo);
+		s4882_adapter[i] = amd756_smbus;
+		sprintf(s4882_adapter[i].name,
+			"SMBus 8111 adapter (CPU%d)", i-1);
+		s4882_adapter[i].algo = s4882_algo+i;
+	}
+	s4882_algo[1].smbus_xfer = amd756_access_virt1;
+	s4882_algo[2].smbus_xfer = amd756_access_virt2;
+	s4882_algo[3].smbus_xfer = amd756_access_virt3;
+	s4882_algo[4].smbus_xfer = amd756_access_virt4;
+
+	/* Configure the PCA9556 multiplexer */
+	ioconfig.byte = 0x00; /* All I/O to output mode */
+	error = amd756_smbus.algo->smbus_xfer(&amd756_smbus, 0x18, 0,
+					      I2C_SMBUS_WRITE, 0x03,
+					      I2C_SMBUS_BYTE_DATA, &ioconfig);
+	if (error) {
+		dev_err(&amd756_smbus.dev, "PCA9556 configuration failed\n");
+		error = -EIO;
+		goto ERROR3;
+	}
+
+	/* Register virtual adapters */
+	for (i = 0; i < 5; i++) {
+		error = i2c_add_adapter(s4882_adapter+i);
+		if (error) {
+			dev_err(&amd756_smbus.dev,
+			       "Virtual adapter %d registration "
+			       "failed, module not inserted\n", i);
+			for (i--; i >= 0; i--)
+				i2c_del_adapter(s4882_adapter+i);
+			goto ERROR3;
+		}
+	}
+
+	return 0;
+
+ERROR3:
+	kfree(s4882_algo);
+	s4882_algo = NULL;
+ERROR2:
+	kfree(s4882_adapter);
+	s4882_adapter = NULL;
+ERROR1:
+	i2c_del_adapter(&amd756_smbus);
+ERROR0:
+	return error;
+}
+
+static void __exit amd756_s4882_exit(void)
+{
+	if (s4882_adapter) {
+		int i;
+
+		for (i = 0; i < 5; i++)
+			i2c_del_adapter(s4882_adapter+i);
+		kfree(s4882_adapter);
+		s4882_adapter = NULL;
+	}
+	if (s4882_algo) {
+		kfree(s4882_algo);
+		s4882_algo = NULL;
+	}
+
+	/* Restore physical bus */
+	if (i2c_add_adapter(&amd756_smbus))
+		dev_err(&amd756_smbus.dev, "Physical bus restoration "
+			"failed\n");
+}
+
+MODULE_AUTHOR("Jean Delvare <khali@linux-fr.org>");
+MODULE_DESCRIPTION("S4882 SMBus multiplexing");
+MODULE_LICENSE("GPL");
+
+module_init(amd756_s4882_init);
+module_exit(amd756_s4882_exit);
diff --git a/drivers/i2c/busses/i2c-amd756.c b/drivers/i2c/busses/i2c-amd756.c
new file mode 100644
index 00000000000..eca5ed3738b
--- /dev/null
+++ b/drivers/i2c/busses/i2c-amd756.c
@@ -0,0 +1,431 @@
+/*
+    amd756.c - Part of lm_sensors, Linux kernel modules for hardware
+              monitoring
+
+    Copyright (c) 1999-2002 Merlin Hughes <merlin@merlin.org>
+
+    Shamelessly ripped from i2c-piix4.c:
+
+    Copyright (c) 1998, 1999  Frodo Looijaard <frodol@dds.nl> and
+    Philip Edelbrock <phil@netroedge.com>
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+/*
+    2002-04-08: Added nForce support. (Csaba Halasz)
+    2002-10-03: Fixed nForce PnP I/O port. (Michael Steil)
+    2002-12-28: Rewritten into something that resembles a Linux driver (hch)
+    2003-11-29: Added back AMD8111 removed by the previous rewrite.
+                (Philip Pokorny)
+*/
+
+/*
+   Supports AMD756, AMD766, AMD768, AMD8111 and nVidia nForce
+   Note: we assume there can only be one device, with one SMBus interface.
+*/
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/stddef.h>
+#include <linux/sched.h>
+#include <linux/ioport.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <asm/io.h>
+
+/* AMD756 SMBus address offsets */
+#define SMB_ADDR_OFFSET		0xE0
+#define SMB_IOSIZE		16
+#define SMB_GLOBAL_STATUS	(0x0 + amd756_ioport)
+#define SMB_GLOBAL_ENABLE	(0x2 + amd756_ioport)
+#define SMB_HOST_ADDRESS	(0x4 + amd756_ioport)
+#define SMB_HOST_DATA		(0x6 + amd756_ioport)
+#define SMB_HOST_COMMAND	(0x8 + amd756_ioport)
+#define SMB_HOST_BLOCK_DATA	(0x9 + amd756_ioport)
+#define SMB_HAS_DATA		(0xA + amd756_ioport)
+#define SMB_HAS_DEVICE_ADDRESS	(0xC + amd756_ioport)
+#define SMB_HAS_HOST_ADDRESS	(0xE + amd756_ioport)
+#define SMB_SNOOP_ADDRESS	(0xF + amd756_ioport)
+
+/* PCI Address Constants */
+
+/* address of I/O space */
+#define SMBBA		0x058		/* mh */
+#define SMBBANFORCE	0x014
+
+/* general configuration */
+#define SMBGCFG		0x041		/* mh */
+
+/* silicon revision code */
+#define SMBREV		0x008
+
+/* Other settings */
+#define MAX_TIMEOUT	500
+
+/* AMD756 constants */
+#define AMD756_QUICK		0x00
+#define AMD756_BYTE		0x01
+#define AMD756_BYTE_DATA	0x02
+#define AMD756_WORD_DATA	0x03
+#define AMD756_PROCESS_CALL	0x04
+#define AMD756_BLOCK_DATA	0x05
+
+
+static unsigned short amd756_ioport = 0;
+
+/* 
+  SMBUS event = I/O 28-29 bit 11
+     see E0 for the status bits and enabled in E2
+     
+*/
+#define GS_ABRT_STS	(1 << 0)
+#define GS_COL_STS	(1 << 1)
+#define GS_PRERR_STS	(1 << 2)
+#define GS_HST_STS	(1 << 3)
+#define GS_HCYC_STS	(1 << 4)
+#define GS_TO_STS	(1 << 5)
+#define GS_SMB_STS	(1 << 11)
+
+#define GS_CLEAR_STS	(GS_ABRT_STS | GS_COL_STS | GS_PRERR_STS | \
+			 GS_HCYC_STS | GS_TO_STS )
+
+#define GE_CYC_TYPE_MASK	(7)
+#define GE_HOST_STC		(1 << 3)
+#define GE_ABORT		(1 << 5)
+
+
+static int amd756_transaction(struct i2c_adapter *adap)
+{
+	int temp;
+	int result = 0;
+	int timeout = 0;
+
+	dev_dbg(&adap->dev, "Transaction (pre): GS=%04x, GE=%04x, ADD=%04x, "
+		"DAT=%04x\n", inw_p(SMB_GLOBAL_STATUS),
+		inw_p(SMB_GLOBAL_ENABLE), inw_p(SMB_HOST_ADDRESS),
+		inb_p(SMB_HOST_DATA));
+
+	/* Make sure the SMBus host is ready to start transmitting */
+	if ((temp = inw_p(SMB_GLOBAL_STATUS)) & (GS_HST_STS | GS_SMB_STS)) {
+		dev_dbg(&adap->dev, "SMBus busy (%04x). Waiting...\n", temp);
+		do {
+			msleep(1);
+			temp = inw_p(SMB_GLOBAL_STATUS);
+		} while ((temp & (GS_HST_STS | GS_SMB_STS)) &&
+		         (timeout++ < MAX_TIMEOUT));
+		/* If the SMBus is still busy, we give up */
+		if (timeout >= MAX_TIMEOUT) {
+			dev_dbg(&adap->dev, "Busy wait timeout (%04x)\n", temp);
+			goto abort;
+		}
+		timeout = 0;
+	}
+
+	/* start the transaction by setting the start bit */
+	outw_p(inw(SMB_GLOBAL_ENABLE) | GE_HOST_STC, SMB_GLOBAL_ENABLE);
+
+	/* We will always wait for a fraction of a second! */
+	do {
+		msleep(1);
+		temp = inw_p(SMB_GLOBAL_STATUS);
+	} while ((temp & GS_HST_STS) && (timeout++ < MAX_TIMEOUT));
+
+	/* If the SMBus is still busy, we give up */
+	if (timeout >= MAX_TIMEOUT) {
+		dev_dbg(&adap->dev, "Completion timeout!\n");
+		goto abort;
+	}
+
+	if (temp & GS_PRERR_STS) {
+		result = -1;
+		dev_dbg(&adap->dev, "SMBus Protocol error (no response)!\n");
+	}
+
+	if (temp & GS_COL_STS) {
+		result = -1;
+		dev_warn(&adap->dev, "SMBus collision!\n");
+	}
+
+	if (temp & GS_TO_STS) {
+		result = -1;
+		dev_dbg(&adap->dev, "SMBus protocol timeout!\n");
+	}
+
+	if (temp & GS_HCYC_STS)
+		dev_dbg(&adap->dev, "SMBus protocol success!\n");
+
+	outw_p(GS_CLEAR_STS, SMB_GLOBAL_STATUS);
+
+#ifdef DEBUG
+	if (((temp = inw_p(SMB_GLOBAL_STATUS)) & GS_CLEAR_STS) != 0x00) {
+		dev_dbg(&adap->dev,
+			"Failed reset at end of transaction (%04x)\n", temp);
+	}
+#endif
+
+	dev_dbg(&adap->dev,
+		"Transaction (post): GS=%04x, GE=%04x, ADD=%04x, DAT=%04x\n",
+		inw_p(SMB_GLOBAL_STATUS), inw_p(SMB_GLOBAL_ENABLE),
+		inw_p(SMB_HOST_ADDRESS), inb_p(SMB_HOST_DATA));
+
+	return result;
+
+ abort:
+	dev_warn(&adap->dev, "Sending abort\n");
+	outw_p(inw(SMB_GLOBAL_ENABLE) | GE_ABORT, SMB_GLOBAL_ENABLE);
+	msleep(100);
+	outw_p(GS_CLEAR_STS, SMB_GLOBAL_STATUS);
+	return -1;
+}
+
+/* Return -1 on error. */
+static s32 amd756_access(struct i2c_adapter * adap, u16 addr,
+		  unsigned short flags, char read_write,
+		  u8 command, int size, union i2c_smbus_data * data)
+{
+	int i, len;
+
+	/** TODO: Should I supporte the 10-bit transfers? */
+	switch (size) {
+	case I2C_SMBUS_PROC_CALL:
+		dev_dbg(&adap->dev, "I2C_SMBUS_PROC_CALL not supported!\n");
+		/* TODO: Well... It is supported, I'm just not sure what to do here... */
+		return -1;
+	case I2C_SMBUS_QUICK:
+		outw_p(((addr & 0x7f) << 1) | (read_write & 0x01),
+		       SMB_HOST_ADDRESS);
+		size = AMD756_QUICK;
+		break;
+	case I2C_SMBUS_BYTE:
+		outw_p(((addr & 0x7f) << 1) | (read_write & 0x01),
+		       SMB_HOST_ADDRESS);
+		if (read_write == I2C_SMBUS_WRITE)
+			outb_p(command, SMB_HOST_DATA);
+		size = AMD756_BYTE;
+		break;
+	case I2C_SMBUS_BYTE_DATA:
+		outw_p(((addr & 0x7f) << 1) | (read_write & 0x01),
+		       SMB_HOST_ADDRESS);
+		outb_p(command, SMB_HOST_COMMAND);
+		if (read_write == I2C_SMBUS_WRITE)
+			outw_p(data->byte, SMB_HOST_DATA);
+		size = AMD756_BYTE_DATA;
+		break;
+	case I2C_SMBUS_WORD_DATA:
+		outw_p(((addr & 0x7f) << 1) | (read_write & 0x01),
+		       SMB_HOST_ADDRESS);
+		outb_p(command, SMB_HOST_COMMAND);
+		if (read_write == I2C_SMBUS_WRITE)
+			outw_p(data->word, SMB_HOST_DATA);	/* TODO: endian???? */
+		size = AMD756_WORD_DATA;
+		break;
+	case I2C_SMBUS_BLOCK_DATA:
+		outw_p(((addr & 0x7f) << 1) | (read_write & 0x01),
+		       SMB_HOST_ADDRESS);
+		outb_p(command, SMB_HOST_COMMAND);
+		if (read_write == I2C_SMBUS_WRITE) {
+			len = data->block[0];
+			if (len < 0)
+				len = 0;
+			if (len > 32)
+				len = 32;
+			outw_p(len, SMB_HOST_DATA);
+			/* i = inw_p(SMBHSTCNT); Reset SMBBLKDAT */
+			for (i = 1; i <= len; i++)
+				outb_p(data->block[i],
+				       SMB_HOST_BLOCK_DATA);
+		}
+		size = AMD756_BLOCK_DATA;
+		break;
+	}
+
+	/* How about enabling interrupts... */
+	outw_p(size & GE_CYC_TYPE_MASK, SMB_GLOBAL_ENABLE);
+
+	if (amd756_transaction(adap))	/* Error in transaction */
+		return -1;
+
+	if ((read_write == I2C_SMBUS_WRITE) || (size == AMD756_QUICK))
+		return 0;
+
+
+	switch (size) {
+	case AMD756_BYTE:
+		data->byte = inw_p(SMB_HOST_DATA);
+		break;
+	case AMD756_BYTE_DATA:
+		data->byte = inw_p(SMB_HOST_DATA);
+		break;
+	case AMD756_WORD_DATA:
+		data->word = inw_p(SMB_HOST_DATA);	/* TODO: endian???? */
+		break;
+	case AMD756_BLOCK_DATA:
+		data->block[0] = inw_p(SMB_HOST_DATA) & 0x3f;
+		if(data->block[0] > 32)
+			data->block[0] = 32;
+		/* i = inw_p(SMBHSTCNT); Reset SMBBLKDAT */
+		for (i = 1; i <= data->block[0]; i++)
+			data->block[i] = inb_p(SMB_HOST_BLOCK_DATA);
+		break;
+	}
+
+	return 0;
+}
+
+static u32 amd756_func(struct i2c_adapter *adapter)
+{
+	return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE |
+	    I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA |
+	    I2C_FUNC_SMBUS_BLOCK_DATA | I2C_FUNC_SMBUS_PROC_CALL;
+}
+
+static struct i2c_algorithm smbus_algorithm = {
+	.name		= "Non-I2C SMBus adapter",
+	.id		= I2C_ALGO_SMBUS,
+	.smbus_xfer	= amd756_access,
+	.functionality	= amd756_func,
+};
+
+struct i2c_adapter amd756_smbus = {
+	.owner		= THIS_MODULE,
+	.class          = I2C_CLASS_HWMON,
+	.algo		= &smbus_algorithm,
+	.name		= "unset",
+};
+
+enum chiptype { AMD756, AMD766, AMD768, NFORCE, AMD8111 };
+static const char* chipname[] = {
+	"AMD756", "AMD766", "AMD768",
+	"nVidia nForce", "AMD8111",
+};
+
+static struct pci_device_id amd756_ids[] = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_VIPER_740B),
+	  .driver_data = AMD756 },
+	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_VIPER_7413),
+	  .driver_data = AMD766 },
+	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_OPUS_7443),
+	  .driver_data = AMD768 },
+	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8111_SMBUS),
+	  .driver_data = AMD8111 },
+	{ PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_SMBUS),
+	  .driver_data = NFORCE },
+	{ 0, }
+};
+
+MODULE_DEVICE_TABLE (pci, amd756_ids);
+
+static int __devinit amd756_probe(struct pci_dev *pdev,
+				  const struct pci_device_id *id)
+{
+	int nforce = (id->driver_data == NFORCE);
+	int error;
+	u8 temp;
+	
+	if (amd756_ioport) {
+		dev_err(&pdev->dev, "Only one device supported "
+		       "(you have a strange motherboard, btw)\n");
+		return -ENODEV;
+	}
+
+	if (nforce) {
+		if (PCI_FUNC(pdev->devfn) != 1)
+			return -ENODEV;
+
+		pci_read_config_word(pdev, SMBBANFORCE, &amd756_ioport);
+		amd756_ioport &= 0xfffc;
+	} else { /* amd */
+		if (PCI_FUNC(pdev->devfn) != 3)
+			return -ENODEV;
+
+		pci_read_config_byte(pdev, SMBGCFG, &temp);
+		if ((temp & 128) == 0) {
+			dev_err(&pdev->dev,
+				"Error: SMBus controller I/O not enabled!\n");
+			return -ENODEV;
+		}
+
+		/* Determine the address of the SMBus areas */
+		/* Technically it is a dword but... */
+		pci_read_config_word(pdev, SMBBA, &amd756_ioport);
+		amd756_ioport &= 0xff00;
+		amd756_ioport += SMB_ADDR_OFFSET;
+	}
+
+	if (!request_region(amd756_ioport, SMB_IOSIZE, "amd756-smbus")) {
+		dev_err(&pdev->dev, "SMB region 0x%x already in use!\n",
+			amd756_ioport);
+		return -ENODEV;
+	}
+
+	pci_read_config_byte(pdev, SMBREV, &temp);
+	dev_dbg(&pdev->dev, "SMBREV = 0x%X\n", temp);
+	dev_dbg(&pdev->dev, "AMD756_smba = 0x%X\n", amd756_ioport);
+
+	/* set up the driverfs linkage to our parent device */
+	amd756_smbus.dev.parent = &pdev->dev;
+
+	sprintf(amd756_smbus.name, "SMBus %s adapter at %04x",
+		chipname[id->driver_data], amd756_ioport);
+
+	error = i2c_add_adapter(&amd756_smbus);
+	if (error) {
+		dev_err(&pdev->dev,
+			"Adapter registration failed, module not inserted\n");
+		goto out_err;
+	}
+
+	return 0;
+
+ out_err:
+	release_region(amd756_ioport, SMB_IOSIZE);
+	return error;
+}
+
+static void __devexit amd756_remove(struct pci_dev *dev)
+{
+	i2c_del_adapter(&amd756_smbus);
+	release_region(amd756_ioport, SMB_IOSIZE);
+}
+
+static struct pci_driver amd756_driver = {
+	.name		= "amd756_smbus",
+	.id_table	= amd756_ids,
+	.probe		= amd756_probe,
+	.remove		= __devexit_p(amd756_remove),
+};
+
+static int __init amd756_init(void)
+{
+	return pci_register_driver(&amd756_driver);
+}
+
+static void __exit amd756_exit(void)
+{
+	pci_unregister_driver(&amd756_driver);
+}
+
+MODULE_AUTHOR("Merlin Hughes <merlin@merlin.org>");
+MODULE_DESCRIPTION("AMD756/766/768/8111 and nVidia nForce SMBus driver");
+MODULE_LICENSE("GPL");
+
+EXPORT_SYMBOL(amd756_smbus);
+
+module_init(amd756_init)
+module_exit(amd756_exit)
diff --git a/drivers/i2c/busses/i2c-amd8111.c b/drivers/i2c/busses/i2c-amd8111.c
new file mode 100644
index 00000000000..af22b401a38
--- /dev/null
+++ b/drivers/i2c/busses/i2c-amd8111.c
@@ -0,0 +1,415 @@
+/*
+ * SMBus 2.0 driver for AMD-8111 IO-Hub.
+ *
+ * Copyright (c) 2002 Vojtech Pavlik
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation version 2.
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/stddef.h>
+#include <linux/sched.h>
+#include <linux/ioport.h>
+#include <linux/init.h>
+#include <linux/i2c.h>
+#include <linux/delay.h>
+#include <asm/io.h>
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR ("Vojtech Pavlik <vojtech@suse.cz>");
+MODULE_DESCRIPTION("AMD8111 SMBus 2.0 driver");
+
+struct amd_smbus {
+	struct pci_dev *dev;
+	struct i2c_adapter adapter;
+	int base;
+	int size;
+};
+
+/*
+ * AMD PCI control registers definitions.
+ */
+
+#define AMD_PCI_MISC	0x48
+
+#define AMD_PCI_MISC_SCI	0x04	/* deliver SCI */
+#define AMD_PCI_MISC_INT	0x02	/* deliver PCI IRQ */
+#define AMD_PCI_MISC_SPEEDUP	0x01	/* 16x clock speedup */
+
+/*
+ * ACPI 2.0 chapter 13 PCI interface definitions.
+ */
+
+#define AMD_EC_DATA	0x00	/* data register */
+#define AMD_EC_SC	0x04	/* status of controller */
+#define AMD_EC_CMD	0x04	/* command register */
+#define AMD_EC_ICR	0x08	/* interrupt control register */
+
+#define AMD_EC_SC_SMI	0x04	/* smi event pending */
+#define AMD_EC_SC_SCI	0x02	/* sci event pending */
+#define AMD_EC_SC_BURST	0x01	/* burst mode enabled */
+#define AMD_EC_SC_CMD	0x08	/* byte in data reg is command */
+#define AMD_EC_SC_IBF	0x02	/* data ready for embedded controller */
+#define AMD_EC_SC_OBF	0x01	/* data ready for host */
+
+#define AMD_EC_CMD_RD	0x80	/* read EC */
+#define AMD_EC_CMD_WR	0x81	/* write EC */
+#define AMD_EC_CMD_BE	0x82	/* enable burst mode */
+#define AMD_EC_CMD_BD	0x83	/* disable burst mode */
+#define AMD_EC_CMD_QR	0x84	/* query EC */
+
+/*
+ * ACPI 2.0 chapter 13 access of registers of the EC
+ */
+
+static unsigned int amd_ec_wait_write(struct amd_smbus *smbus)
+{
+	int timeout = 500;
+
+	while (timeout-- && (inb(smbus->base + AMD_EC_SC) & AMD_EC_SC_IBF))
+		udelay(1);
+
+	if (!timeout) {
+		dev_warn(&smbus->dev->dev, "Timeout while waiting for IBF to clear\n");
+		return -1;
+	}
+
+	return 0;
+}
+
+static unsigned int amd_ec_wait_read(struct amd_smbus *smbus)
+{
+	int timeout = 500;
+
+	while (timeout-- && (~inb(smbus->base + AMD_EC_SC) & AMD_EC_SC_OBF))
+		udelay(1);
+
+	if (!timeout) {
+		dev_warn(&smbus->dev->dev, "Timeout while waiting for OBF to set\n");
+		return -1;
+	}
+
+	return 0;
+}
+
+static unsigned int amd_ec_read(struct amd_smbus *smbus, unsigned char address, unsigned char *data)
+{
+	if (amd_ec_wait_write(smbus))
+		return -1;
+	outb(AMD_EC_CMD_RD, smbus->base + AMD_EC_CMD);
+
+	if (amd_ec_wait_write(smbus))
+		return -1;
+	outb(address, smbus->base + AMD_EC_DATA);
+
+	if (amd_ec_wait_read(smbus))
+		return -1;
+	*data = inb(smbus->base + AMD_EC_DATA);
+
+	return 0;
+}
+
+static unsigned int amd_ec_write(struct amd_smbus *smbus, unsigned char address, unsigned char data)
+{
+	if (amd_ec_wait_write(smbus))
+		return -1;
+	outb(AMD_EC_CMD_WR, smbus->base + AMD_EC_CMD);
+
+	if (amd_ec_wait_write(smbus))
+		return -1;
+	outb(address, smbus->base + AMD_EC_DATA);
+
+	if (amd_ec_wait_write(smbus))
+		return -1;
+	outb(data, smbus->base + AMD_EC_DATA);
+
+	return 0;
+}
+
+/*
+ * ACPI 2.0 chapter 13 SMBus 2.0 EC register model
+ */
+
+#define AMD_SMB_PRTCL	0x00	/* protocol, PEC */
+#define AMD_SMB_STS	0x01	/* status */
+#define AMD_SMB_ADDR	0x02	/* address */
+#define AMD_SMB_CMD	0x03	/* command */
+#define AMD_SMB_DATA	0x04	/* 32 data registers */
+#define AMD_SMB_BCNT	0x24	/* number of data bytes */
+#define AMD_SMB_ALRM_A	0x25	/* alarm address */
+#define AMD_SMB_ALRM_D	0x26	/* 2 bytes alarm data */
+
+#define AMD_SMB_STS_DONE	0x80
+#define AMD_SMB_STS_ALRM	0x40
+#define AMD_SMB_STS_RES		0x20
+#define AMD_SMB_STS_STATUS	0x1f
+
+#define AMD_SMB_STATUS_OK	0x00
+#define AMD_SMB_STATUS_FAIL	0x07
+#define AMD_SMB_STATUS_DNAK	0x10
+#define AMD_SMB_STATUS_DERR	0x11
+#define AMD_SMB_STATUS_CMD_DENY	0x12
+#define AMD_SMB_STATUS_UNKNOWN	0x13
+#define AMD_SMB_STATUS_ACC_DENY	0x17
+#define AMD_SMB_STATUS_TIMEOUT	0x18
+#define AMD_SMB_STATUS_NOTSUP	0x19
+#define AMD_SMB_STATUS_BUSY	0x1A
+#define AMD_SMB_STATUS_PEC	0x1F
+
+#define AMD_SMB_PRTCL_WRITE		0x00
+#define AMD_SMB_PRTCL_READ		0x01
+#define AMD_SMB_PRTCL_QUICK		0x02
+#define AMD_SMB_PRTCL_BYTE		0x04
+#define AMD_SMB_PRTCL_BYTE_DATA		0x06
+#define AMD_SMB_PRTCL_WORD_DATA		0x08
+#define AMD_SMB_PRTCL_BLOCK_DATA	0x0a
+#define AMD_SMB_PRTCL_PROC_CALL		0x0c
+#define AMD_SMB_PRTCL_BLOCK_PROC_CALL	0x0d
+#define AMD_SMB_PRTCL_I2C_BLOCK_DATA	0x4a
+#define AMD_SMB_PRTCL_PEC		0x80
+
+
+static s32 amd8111_access(struct i2c_adapter * adap, u16 addr, unsigned short flags,
+		char read_write, u8 command, int size, union i2c_smbus_data * data)
+{
+	struct amd_smbus *smbus = adap->algo_data;
+	unsigned char protocol, len, pec, temp[2];
+	int i;
+
+	protocol = (read_write == I2C_SMBUS_READ) ? AMD_SMB_PRTCL_READ : AMD_SMB_PRTCL_WRITE;
+	pec = (flags & I2C_CLIENT_PEC) ? AMD_SMB_PRTCL_PEC : 0;
+
+	switch (size) {
+
+		case I2C_SMBUS_QUICK:
+			protocol |= AMD_SMB_PRTCL_QUICK;
+			read_write = I2C_SMBUS_WRITE;
+			break;
+
+		case I2C_SMBUS_BYTE:
+			if (read_write == I2C_SMBUS_WRITE)
+				amd_ec_write(smbus, AMD_SMB_CMD, command);
+			protocol |= AMD_SMB_PRTCL_BYTE;
+			break;
+
+		case I2C_SMBUS_BYTE_DATA:
+			amd_ec_write(smbus, AMD_SMB_CMD, command);
+			if (read_write == I2C_SMBUS_WRITE)
+				amd_ec_write(smbus, AMD_SMB_DATA, data->byte);
+			protocol |= AMD_SMB_PRTCL_BYTE_DATA;
+			break;
+
+		case I2C_SMBUS_WORD_DATA:
+			amd_ec_write(smbus, AMD_SMB_CMD, command);
+			if (read_write == I2C_SMBUS_WRITE) {
+				amd_ec_write(smbus, AMD_SMB_DATA, data->word);
+				amd_ec_write(smbus, AMD_SMB_DATA + 1, data->word >> 8);
+			}
+			protocol |= AMD_SMB_PRTCL_WORD_DATA | pec;
+			break;
+
+		case I2C_SMBUS_BLOCK_DATA:
+			amd_ec_write(smbus, AMD_SMB_CMD, command);
+			if (read_write == I2C_SMBUS_WRITE) {
+				len = min_t(u8, data->block[0], 32);
+				amd_ec_write(smbus, AMD_SMB_BCNT, len);
+				for (i = 0; i < len; i++)
+					amd_ec_write(smbus, AMD_SMB_DATA + i, data->block[i + 1]);
+			}
+			protocol |= AMD_SMB_PRTCL_BLOCK_DATA | pec;
+			break;
+
+		case I2C_SMBUS_I2C_BLOCK_DATA:
+			len = min_t(u8, data->block[0], 32);
+			amd_ec_write(smbus, AMD_SMB_CMD, command);
+			amd_ec_write(smbus, AMD_SMB_BCNT, len);
+			if (read_write == I2C_SMBUS_WRITE)
+				for (i = 0; i < len; i++)
+					amd_ec_write(smbus, AMD_SMB_DATA + i, data->block[i + 1]);
+			protocol |= AMD_SMB_PRTCL_I2C_BLOCK_DATA;
+			break;
+
+		case I2C_SMBUS_PROC_CALL:
+			amd_ec_write(smbus, AMD_SMB_CMD, command);
+			amd_ec_write(smbus, AMD_SMB_DATA, data->word);
+			amd_ec_write(smbus, AMD_SMB_DATA + 1, data->word >> 8);
+			protocol = AMD_SMB_PRTCL_PROC_CALL | pec;
+			read_write = I2C_SMBUS_READ;
+			break;
+
+		case I2C_SMBUS_BLOCK_PROC_CALL:
+			protocol |= pec;
+			len = min_t(u8, data->block[0], 31);
+			amd_ec_write(smbus, AMD_SMB_CMD, command);
+			amd_ec_write(smbus, AMD_SMB_BCNT, len);
+			for (i = 0; i < len; i++)
+				amd_ec_write(smbus, AMD_SMB_DATA + i, data->block[i + 1]);
+			protocol = AMD_SMB_PRTCL_BLOCK_PROC_CALL | pec;
+			read_write = I2C_SMBUS_READ;
+			break;
+
+		case I2C_SMBUS_WORD_DATA_PEC:
+		case I2C_SMBUS_BLOCK_DATA_PEC:
+		case I2C_SMBUS_PROC_CALL_PEC:
+		case I2C_SMBUS_BLOCK_PROC_CALL_PEC:
+			dev_warn(&adap->dev, "Unexpected software PEC transaction %d\n.", size);
+			return -1;
+
+		default:
+			dev_warn(&adap->dev, "Unsupported transaction %d\n", size);
+			return -1;
+	}
+
+	amd_ec_write(smbus, AMD_SMB_ADDR, addr << 1);
+	amd_ec_write(smbus, AMD_SMB_PRTCL, protocol);
+
+	amd_ec_read(smbus, AMD_SMB_STS, temp + 0);
+
+	if (~temp[0] & AMD_SMB_STS_DONE) {
+		udelay(500);
+		amd_ec_read(smbus, AMD_SMB_STS, temp + 0);
+	}
+
+	if (~temp[0] & AMD_SMB_STS_DONE) {
+		msleep(1);
+		amd_ec_read(smbus, AMD_SMB_STS, temp + 0);
+	}
+
+	if ((~temp[0] & AMD_SMB_STS_DONE) || (temp[0] & AMD_SMB_STS_STATUS))
+		return -1;
+
+	if (read_write == I2C_SMBUS_WRITE)
+		return 0;
+
+	switch (size) {
+
+		case I2C_SMBUS_BYTE:
+		case I2C_SMBUS_BYTE_DATA:
+			amd_ec_read(smbus, AMD_SMB_DATA, &data->byte);
+			break;
+
+		case I2C_SMBUS_WORD_DATA:
+		case I2C_SMBUS_PROC_CALL:
+			amd_ec_read(smbus, AMD_SMB_DATA, temp + 0);
+			amd_ec_read(smbus, AMD_SMB_DATA + 1, temp + 1);
+			data->word = (temp[1] << 8) | temp[0];
+			break;
+
+		case I2C_SMBUS_BLOCK_DATA:
+		case I2C_SMBUS_BLOCK_PROC_CALL:
+			amd_ec_read(smbus, AMD_SMB_BCNT, &len);
+			len = min_t(u8, len, 32);
+		case I2C_SMBUS_I2C_BLOCK_DATA:
+			for (i = 0; i < len; i++)
+				amd_ec_read(smbus, AMD_SMB_DATA + i, data->block + i + 1);
+			data->block[0] = len;
+			break;
+	}
+
+	return 0;
+}
+
+
+static u32 amd8111_func(struct i2c_adapter *adapter)
+{
+	return	I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE | I2C_FUNC_SMBUS_BYTE_DATA |
+		I2C_FUNC_SMBUS_WORD_DATA | I2C_FUNC_SMBUS_BLOCK_DATA |
+		I2C_FUNC_SMBUS_PROC_CALL | I2C_FUNC_SMBUS_BLOCK_PROC_CALL |
+		I2C_FUNC_SMBUS_I2C_BLOCK | I2C_FUNC_SMBUS_HWPEC_CALC;
+}
+
+static struct i2c_algorithm smbus_algorithm = {
+	.name = "Non-I2C SMBus 2.0 adapter",
+	.id = I2C_ALGO_SMBUS,
+	.smbus_xfer = amd8111_access,
+	.functionality = amd8111_func,
+};
+
+
+static struct pci_device_id amd8111_ids[] = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8111_SMBUS2) },
+	{ 0, }
+};
+
+MODULE_DEVICE_TABLE (pci, amd8111_ids);
+
+static int __devinit amd8111_probe(struct pci_dev *dev, const struct pci_device_id *id)
+{
+	struct amd_smbus *smbus;
+	int error = -ENODEV;
+
+	if (~pci_resource_flags(dev, 0) & IORESOURCE_IO)
+		return -ENODEV;
+
+	smbus = kmalloc(sizeof(struct amd_smbus), GFP_KERNEL);
+	if (!smbus)
+		return -ENOMEM;
+	memset(smbus, 0, sizeof(struct amd_smbus));
+
+	smbus->dev = dev;
+	smbus->base = pci_resource_start(dev, 0);
+	smbus->size = pci_resource_len(dev, 0);
+
+	if (!request_region(smbus->base, smbus->size, "amd8111 SMBus 2.0"))
+		goto out_kfree;
+
+	smbus->adapter.owner = THIS_MODULE;
+	snprintf(smbus->adapter.name, I2C_NAME_SIZE,
+		"SMBus2 AMD8111 adapter at %04x", smbus->base);
+	smbus->adapter.class = I2C_CLASS_HWMON;
+	smbus->adapter.algo = &smbus_algorithm;
+	smbus->adapter.algo_data = smbus;
+
+	/* set up the driverfs linkage to our parent device */
+	smbus->adapter.dev.parent = &dev->dev;
+
+	error = i2c_add_adapter(&smbus->adapter);
+	if (error)
+		goto out_release_region;
+
+	pci_write_config_dword(smbus->dev, AMD_PCI_MISC, 0);
+	pci_set_drvdata(dev, smbus);
+	return 0;
+
+ out_release_region:
+	release_region(smbus->base, smbus->size);
+ out_kfree:
+	kfree(smbus);
+	return -1;
+}
+
+
+static void __devexit amd8111_remove(struct pci_dev *dev)
+{
+	struct amd_smbus *smbus = pci_get_drvdata(dev);
+
+	i2c_del_adapter(&smbus->adapter);
+	release_region(smbus->base, smbus->size);
+	kfree(smbus);
+}
+
+static struct pci_driver amd8111_driver = {
+	.name		= "amd8111_smbus2",
+	.id_table	= amd8111_ids,
+	.probe		= amd8111_probe,
+	.remove		= __devexit_p(amd8111_remove),
+};
+
+static int __init i2c_amd8111_init(void)
+{
+	return pci_register_driver(&amd8111_driver);
+}
+
+
+static void __exit i2c_amd8111_exit(void)
+{
+	pci_unregister_driver(&amd8111_driver);
+}
+
+module_init(i2c_amd8111_init);
+module_exit(i2c_amd8111_exit);
diff --git a/drivers/i2c/busses/i2c-au1550.c b/drivers/i2c/busses/i2c-au1550.c
new file mode 100644
index 00000000000..75831a20b0b
--- /dev/null
+++ b/drivers/i2c/busses/i2c-au1550.c
@@ -0,0 +1,435 @@
+/*
+ * i2c-au1550.c: SMBus (i2c) adapter for Alchemy PSC interface
+ * Copyright (C) 2004 Embedded Edge, LLC <dan@embeddededge.com>
+ *
+ * 2.6 port by Matt Porter <mporter@kernel.crashing.org>
+ *
+ * The documentation describes this as an SMBus controller, but it doesn't
+ * understand any of the SMBus protocol in hardware.  It's really an I2C
+ * controller that could emulate most of the SMBus in software.
+ *
+ * This is just a skeleton adapter to use with the Au1550 PSC
+ * algorithm.  It was developed for the Pb1550, but will work with
+ * any Au1550 board that has a similar PSC configuration.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ */
+
+#include <linux/config.h>
+#include <linux/delay.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/i2c.h>
+
+#include <asm/mach-au1x00/au1000.h>
+#include <asm/mach-pb1x00/pb1550.h>
+#include <asm/mach-au1x00/au1xxx_psc.h>
+
+#include "i2c-au1550.h"
+
+static int
+wait_xfer_done(struct i2c_au1550_data *adap)
+{
+	u32	stat;
+	int	i;
+	volatile psc_smb_t	*sp;
+
+	sp = (volatile psc_smb_t *)(adap->psc_base);
+
+	/* Wait for Tx FIFO Underflow.
+	*/
+	for (i = 0; i < adap->xfer_timeout; i++) {
+		stat = sp->psc_smbevnt;
+		au_sync();
+		if ((stat & PSC_SMBEVNT_TU) != 0) {
+			/* Clear it.  */
+			sp->psc_smbevnt = PSC_SMBEVNT_TU;
+			au_sync();
+			return 0;
+		}
+		udelay(1);
+	}
+
+	return -ETIMEDOUT;
+}
+
+static int
+wait_ack(struct i2c_au1550_data *adap)
+{
+	u32	stat;
+	volatile psc_smb_t	*sp;
+
+	if (wait_xfer_done(adap))
+		return -ETIMEDOUT;
+
+	sp = (volatile psc_smb_t *)(adap->psc_base);
+
+	stat = sp->psc_smbevnt;
+	au_sync();
+
+	if ((stat & (PSC_SMBEVNT_DN | PSC_SMBEVNT_AN | PSC_SMBEVNT_AL)) != 0)
+		return -ETIMEDOUT;
+
+	return 0;
+}
+
+static int
+wait_master_done(struct i2c_au1550_data *adap)
+{
+	u32	stat;
+	int	i;
+	volatile psc_smb_t	*sp;
+
+	sp = (volatile psc_smb_t *)(adap->psc_base);
+
+	/* Wait for Master Done.
+	*/
+	for (i = 0; i < adap->xfer_timeout; i++) {
+		stat = sp->psc_smbevnt;
+		au_sync();
+		if ((stat & PSC_SMBEVNT_MD) != 0)
+			return 0;
+		udelay(1);
+	}
+
+	return -ETIMEDOUT;
+}
+
+static int
+do_address(struct i2c_au1550_data *adap, unsigned int addr, int rd)
+{
+	volatile psc_smb_t	*sp;
+	u32			stat;
+
+	sp = (volatile psc_smb_t *)(adap->psc_base);
+
+	/* Reset the FIFOs, clear events.
+	*/
+	sp->psc_smbpcr = PSC_SMBPCR_DC;
+	sp->psc_smbevnt = PSC_SMBEVNT_ALLCLR;
+	au_sync();
+	do {
+		stat = sp->psc_smbpcr;
+		au_sync();
+	} while ((stat & PSC_SMBPCR_DC) != 0);
+
+	/* Write out the i2c chip address and specify operation
+	*/
+	addr <<= 1;
+	if (rd)
+		addr |= 1;
+
+	/* Put byte into fifo, start up master.
+	*/
+	sp->psc_smbtxrx = addr;
+	au_sync();
+	sp->psc_smbpcr = PSC_SMBPCR_MS;
+	au_sync();
+	if (wait_ack(adap))
+		return -EIO;
+	return 0;
+}
+
+static u32
+wait_for_rx_byte(struct i2c_au1550_data *adap, u32 *ret_data)
+{
+	int	j;
+	u32	data, stat;
+	volatile psc_smb_t	*sp;
+
+	if (wait_xfer_done(adap))
+		return -EIO;
+
+	sp = (volatile psc_smb_t *)(adap->psc_base);
+
+	j =  adap->xfer_timeout * 100;
+	do {
+		j--;
+		if (j <= 0)
+			return -EIO;
+
+		stat = sp->psc_smbstat;
+		au_sync();
+		if ((stat & PSC_SMBSTAT_RE) == 0)
+			j = 0;
+		else
+			udelay(1);
+	} while (j > 0);
+	data = sp->psc_smbtxrx;
+	au_sync();
+	*ret_data = data;
+
+	return 0;
+}
+
+static int
+i2c_read(struct i2c_au1550_data *adap, unsigned char *buf,
+		    unsigned int len)
+{
+	int	i;
+	u32	data;
+	volatile psc_smb_t	*sp;
+
+	if (len == 0)
+		return 0;
+
+	/* A read is performed by stuffing the transmit fifo with
+	 * zero bytes for timing, waiting for bytes to appear in the
+	 * receive fifo, then reading the bytes.
+	 */
+
+	sp = (volatile psc_smb_t *)(adap->psc_base);
+
+	i = 0;
+	while (i < (len-1)) {
+		sp->psc_smbtxrx = 0;
+		au_sync();
+		if (wait_for_rx_byte(adap, &data))
+			return -EIO;
+
+		buf[i] = data;
+		i++;
+	}
+
+	/* The last byte has to indicate transfer done.
+	*/
+	sp->psc_smbtxrx = PSC_SMBTXRX_STP;
+	au_sync();
+	if (wait_master_done(adap))
+		return -EIO;
+
+	data = sp->psc_smbtxrx;
+	au_sync();
+	buf[i] = data;
+	return 0;
+}
+
+static int
+i2c_write(struct i2c_au1550_data *adap, unsigned char *buf,
+		     unsigned int len)
+{
+	int	i;
+	u32	data;
+	volatile psc_smb_t	*sp;
+
+	if (len == 0)
+		return 0;
+
+	sp = (volatile psc_smb_t *)(adap->psc_base);
+
+	i = 0;
+	while (i < (len-1)) {
+		data = buf[i];
+		sp->psc_smbtxrx = data;
+		au_sync();
+		if (wait_ack(adap))
+			return -EIO;
+		i++;
+	}
+
+	/* The last byte has to indicate transfer done.
+	*/
+	data = buf[i];
+	data |= PSC_SMBTXRX_STP;
+	sp->psc_smbtxrx = data;
+	au_sync();
+	if (wait_master_done(adap))
+		return -EIO;
+	return 0;
+}
+
+static int
+au1550_xfer(struct i2c_adapter *i2c_adap, struct i2c_msg *msgs, int num)
+{
+	struct i2c_au1550_data *adap = i2c_adap->algo_data;
+	struct i2c_msg *p;
+	int i, err = 0;
+
+	for (i = 0; !err && i < num; i++) {
+		p = &msgs[i];
+		err = do_address(adap, p->addr, p->flags & I2C_M_RD);
+		if (err || !p->len)
+			continue;
+		if (p->flags & I2C_M_RD)
+			err = i2c_read(adap, p->buf, p->len);
+		else
+			err = i2c_write(adap, p->buf, p->len);
+	}
+
+	/* Return the number of messages processed, or the error code.
+	*/
+	if (err == 0)
+		err = num;
+	return err;
+}
+
+static u32
+au1550_func(struct i2c_adapter *adap)
+{
+	return I2C_FUNC_I2C;
+}
+
+static struct i2c_algorithm au1550_algo = {
+	.name		= "Au1550 algorithm",
+	.id		= I2C_ALGO_AU1550,
+	.master_xfer	= au1550_xfer,
+	.functionality	= au1550_func,
+};
+
+/*
+ * registering functions to load algorithms at runtime
+ * Prior to calling us, the 50MHz clock frequency and routing
+ * must have been set up for the PSC indicated by the adapter.
+ */
+int
+i2c_au1550_add_bus(struct i2c_adapter *i2c_adap)
+{
+	struct i2c_au1550_data *adap = i2c_adap->algo_data;
+	volatile psc_smb_t	*sp;
+	u32	stat;
+
+	i2c_adap->algo = &au1550_algo;
+
+	/* Now, set up the PSC for SMBus PIO mode.
+	*/
+	sp = (volatile psc_smb_t *)(adap->psc_base);
+	sp->psc_ctrl = PSC_CTRL_DISABLE;
+	au_sync();
+	sp->psc_sel = PSC_SEL_PS_SMBUSMODE;
+	sp->psc_smbcfg = 0;
+	au_sync();
+	sp->psc_ctrl = PSC_CTRL_ENABLE;
+	au_sync();
+	do {
+		stat = sp->psc_smbstat;
+		au_sync();
+	} while ((stat & PSC_SMBSTAT_SR) == 0);
+
+	sp->psc_smbcfg = (PSC_SMBCFG_RT_FIFO8 | PSC_SMBCFG_TT_FIFO8 |
+				PSC_SMBCFG_DD_DISABLE);
+
+	/* Divide by 8 to get a 6.25 MHz clock.  The later protocol
+	 * timings are based on this clock.
+	 */
+	sp->psc_smbcfg |= PSC_SMBCFG_SET_DIV(PSC_SMBCFG_DIV8);
+	sp->psc_smbmsk = PSC_SMBMSK_ALLMASK;
+	au_sync();
+
+	/* Set the protocol timer values.  See Table 71 in the
+	 * Au1550 Data Book for standard timing values.
+	 */
+	sp->psc_smbtmr = PSC_SMBTMR_SET_TH(0) | PSC_SMBTMR_SET_PS(15) | \
+		PSC_SMBTMR_SET_PU(15) | PSC_SMBTMR_SET_SH(15) | \
+		PSC_SMBTMR_SET_SU(15) | PSC_SMBTMR_SET_CL(15) | \
+		PSC_SMBTMR_SET_CH(15);
+	au_sync();
+
+	sp->psc_smbcfg |= PSC_SMBCFG_DE_ENABLE;
+	do {
+		stat = sp->psc_smbstat;
+		au_sync();
+	} while ((stat & PSC_SMBSTAT_DR) == 0);
+
+	return i2c_add_adapter(i2c_adap);
+}
+
+
+int
+i2c_au1550_del_bus(struct i2c_adapter *adap)
+{
+	return i2c_del_adapter(adap);
+}
+
+static int
+pb1550_reg(struct i2c_client *client)
+{
+	return 0;
+}
+
+static int
+pb1550_unreg(struct i2c_client *client)
+{
+	return 0;
+}
+
+static struct i2c_au1550_data pb1550_i2c_info = {
+	SMBUS_PSC_BASE, 200, 200
+};
+
+static struct i2c_adapter pb1550_board_adapter = {
+	name:              "pb1550 adapter",
+	id:                I2C_HW_AU1550_PSC,
+	algo:              NULL,
+	algo_data:         &pb1550_i2c_info,
+	client_register:   pb1550_reg,
+	client_unregister: pb1550_unreg,
+};
+
+/* BIG hack to support the control interface on the Wolfson WM8731
+ * audio codec on the Pb1550 board.  We get an address and two data
+ * bytes to write, create an i2c message, and send it across the
+ * i2c transfer function.  We do this here because we have access to
+ * the i2c adapter structure.
+ */
+static struct i2c_msg wm_i2c_msg;  /* We don't want this stuff on the stack */
+static	u8 i2cbuf[2];
+
+int
+pb1550_wm_codec_write(u8 addr, u8 reg, u8 val)
+{
+	wm_i2c_msg.addr = addr;
+	wm_i2c_msg.flags = 0;
+	wm_i2c_msg.buf = i2cbuf;
+	wm_i2c_msg.len = 2;
+	i2cbuf[0] = reg;
+	i2cbuf[1] = val;
+
+	return pb1550_board_adapter.algo->master_xfer(&pb1550_board_adapter, &wm_i2c_msg, 1);
+}
+
+static int __init
+i2c_au1550_init(void)
+{
+	printk(KERN_INFO "Au1550 I2C: ");
+
+	/* This is where we would set up a 50MHz clock source
+	 * and routing.  On the Pb1550, the SMBus is PSC2, which
+	 * uses a shared clock with USB.  This has been already
+	 * configured by Yamon as a 48MHz clock, close enough
+	 * for our work.
+	 */
+        if (i2c_au1550_add_bus(&pb1550_board_adapter) < 0) {
+		printk("failed to initialize.\n");
+                return -ENODEV;
+	}
+
+	printk("initialized.\n");
+	return 0;
+}
+
+static void __exit
+i2c_au1550_exit(void)
+{
+	i2c_au1550_del_bus(&pb1550_board_adapter);
+}
+
+MODULE_AUTHOR("Dan Malek, Embedded Edge, LLC.");
+MODULE_DESCRIPTION("SMBus adapter Alchemy pb1550");
+MODULE_LICENSE("GPL");
+
+module_init (i2c_au1550_init);
+module_exit (i2c_au1550_exit);
diff --git a/drivers/i2c/busses/i2c-au1550.h b/drivers/i2c/busses/i2c-au1550.h
new file mode 100644
index 00000000000..fce15d161ae
--- /dev/null
+++ b/drivers/i2c/busses/i2c-au1550.h
@@ -0,0 +1,32 @@
+/*
+ * Copyright (C) 2004 Embedded Edge, LLC <dan@embeddededge.com>
+ * 2.6 port by Matt Porter <mporter@kernel.crashing.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef I2C_AU1550_H
+#define I2C_AU1550_H
+
+struct i2c_au1550_data {
+	u32	psc_base;
+	int	xfer_timeout;
+	int	ack_timeout;
+};
+
+int i2c_au1550_add_bus(struct i2c_adapter *);
+int i2c_au1550_del_bus(struct i2c_adapter *);
+
+#endif /* I2C_AU1550_H */
diff --git a/drivers/i2c/busses/i2c-elektor.c b/drivers/i2c/busses/i2c-elektor.c
new file mode 100644
index 00000000000..0a7720000a0
--- /dev/null
+++ b/drivers/i2c/busses/i2c-elektor.c
@@ -0,0 +1,295 @@
+/* ------------------------------------------------------------------------- */
+/* i2c-elektor.c i2c-hw access for PCF8584 style isa bus adaptes             */
+/* ------------------------------------------------------------------------- */
+/*   Copyright (C) 1995-97 Simon G. Vogl
+                   1998-99 Hans Berglund
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.		     */
+/* ------------------------------------------------------------------------- */
+
+/* With some changes from Kyösti Mälkki <kmalkki@cc.hut.fi> and even
+   Frodo Looijaard <frodol@dds.nl> */
+
+/* Partialy rewriten by Oleg I. Vdovikin for mmapped support of 
+   for Alpha Processor Inc. UP-2000(+) boards */
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/ioport.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <linux/wait.h>
+
+#include <linux/i2c.h>
+#include <linux/i2c-algo-pcf.h>
+
+#include <asm/io.h>
+#include <asm/irq.h>
+
+#include "../algos/i2c-algo-pcf.h"
+
+#define DEFAULT_BASE 0x330
+
+static int base;
+static int irq;
+static int clock  = 0x1c;
+static int own    = 0x55;
+static int mmapped;
+
+/* vdovikin: removed static struct i2c_pcf_isa gpi; code - 
+  this module in real supports only one device, due to missing arguments
+  in some functions, called from the algo-pcf module. Sometimes it's
+  need to be rewriten - but for now just remove this for simpler reading */
+
+static wait_queue_head_t pcf_wait;
+static int pcf_pending;
+static spinlock_t lock;
+
+/* ----- local functions ----------------------------------------------	*/
+
+static void pcf_isa_setbyte(void *data, int ctl, int val)
+{
+	int address = ctl ? (base + 1) : base;
+
+	/* enable irq if any specified for serial operation */
+	if (ctl && irq && (val & I2C_PCF_ESO)) {
+		val |= I2C_PCF_ENI;
+	}
+
+	pr_debug("i2c-elektor: Write 0x%X 0x%02X\n", address, val & 255);
+
+	switch (mmapped) {
+	case 0: /* regular I/O */
+		outb(val, address);
+		break;
+	case 2: /* double mapped I/O needed for UP2000 board,
+                   I don't know why this... */
+		writeb(val, (void *)address);
+		/* fall */
+	case 1: /* memory mapped I/O */
+		writeb(val, (void *)address);
+		break;
+	}
+}
+
+static int pcf_isa_getbyte(void *data, int ctl)
+{
+	int address = ctl ? (base + 1) : base;
+	int val = mmapped ? readb((void *)address) : inb(address);
+
+	pr_debug("i2c-elektor: Read 0x%X 0x%02X\n", address, val);
+
+	return (val);
+}
+
+static int pcf_isa_getown(void *data)
+{
+	return (own);
+}
+
+
+static int pcf_isa_getclock(void *data)
+{
+	return (clock);
+}
+
+static void pcf_isa_waitforpin(void) {
+	DEFINE_WAIT(wait);
+	int timeout = 2;
+	unsigned long flags;
+
+	if (irq > 0) {
+		spin_lock_irqsave(&lock, flags);
+		if (pcf_pending == 0) {
+			spin_unlock_irqrestore(&lock, flags);
+			prepare_to_wait(&pcf_wait, &wait, TASK_INTERRUPTIBLE);
+			if (schedule_timeout(timeout*HZ)) {
+				spin_lock_irqsave(&lock, flags);
+				if (pcf_pending == 1) {
+					pcf_pending = 0;
+				}
+				spin_unlock_irqrestore(&lock, flags);
+			}
+			finish_wait(&pcf_wait, &wait);
+		} else {
+			pcf_pending = 0;
+			spin_unlock_irqrestore(&lock, flags);
+		}
+	} else {
+		udelay(100);
+	}
+}
+
+
+static irqreturn_t pcf_isa_handler(int this_irq, void *dev_id, struct pt_regs *regs) {
+	spin_lock(&lock);
+	pcf_pending = 1;
+	spin_unlock(&lock);
+	wake_up_interruptible(&pcf_wait);
+	return IRQ_HANDLED;
+}
+
+
+static int pcf_isa_init(void)
+{
+	spin_lock_init(&lock);
+	if (!mmapped) {
+		if (!request_region(base, 2, "i2c (isa bus adapter)")) {
+			printk(KERN_ERR
+			       "i2c-elektor: requested I/O region (0x%X:2) "
+			       "is in use.\n", base);
+			return -ENODEV;
+		}
+	}
+	if (irq > 0) {
+		if (request_irq(irq, pcf_isa_handler, 0, "PCF8584", NULL) < 0) {
+			printk(KERN_ERR "i2c-elektor: Request irq%d failed\n", irq);
+			irq = 0;
+		} else
+			enable_irq(irq);
+	}
+	return 0;
+}
+
+/* ------------------------------------------------------------------------
+ * Encapsulate the above functions in the correct operations structure.
+ * This is only done when more than one hardware adapter is supported.
+ */
+static struct i2c_algo_pcf_data pcf_isa_data = {
+	.setpcf	    = pcf_isa_setbyte,
+	.getpcf	    = pcf_isa_getbyte,
+	.getown	    = pcf_isa_getown,
+	.getclock   = pcf_isa_getclock,
+	.waitforpin = pcf_isa_waitforpin,
+	.udelay	    = 10,
+	.mdelay	    = 10,
+	.timeout    = 100,
+};
+
+static struct i2c_adapter pcf_isa_ops = {
+	.owner		= THIS_MODULE,
+	.class		= I2C_CLASS_HWMON,
+	.id		= I2C_HW_P_ELEK,
+	.algo_data	= &pcf_isa_data,
+	.name		= "PCF8584 ISA adapter",
+};
+
+static int __init i2c_pcfisa_init(void) 
+{
+#ifdef __alpha__
+	/* check to see we have memory mapped PCF8584 connected to the 
+	Cypress cy82c693 PCI-ISA bridge as on UP2000 board */
+	if (base == 0) {
+		struct pci_dev *cy693_dev;
+		
+		cy693_dev = pci_get_device(PCI_VENDOR_ID_CONTAQ, 
+					   PCI_DEVICE_ID_CONTAQ_82C693, NULL);
+		if (cy693_dev) {
+			char config;
+			/* yeap, we've found cypress, let's check config */
+			if (!pci_read_config_byte(cy693_dev, 0x47, &config)) {
+				
+				pr_debug("i2c-elektor: found cy82c693, config register 0x47 = 0x%02x.\n", config);
+
+				/* UP2000 board has this register set to 0xe1,
+                                   but the most significant bit as seems can be 
+				   reset during the proper initialisation
+                                   sequence if guys from API decides to do that
+                                   (so, we can even enable Tsunami Pchip
+                                   window for the upper 1 Gb) */
+
+				/* so just check for ROMCS at 0xe0000,
+                                   ROMCS enabled for writes
+				   and external XD Bus buffer in use. */
+				if ((config & 0x7f) == 0x61) {
+					/* seems to be UP2000 like board */
+					base = 0xe0000;
+                                        /* I don't know why we need to
+                                           write twice */
+					mmapped = 2;
+                                        /* UP2000 drives ISA with
+					   8.25 MHz (PCI/4) clock
+					   (this can be read from cypress) */
+					clock = I2C_PCF_CLK | I2C_PCF_TRNS90;
+					printk(KERN_INFO "i2c-elektor: found API UP2000 like board, will probe PCF8584 later.\n");
+				}
+			}
+			pci_dev_put(cy693_dev);
+		}
+	}
+#endif
+
+	/* sanity checks for mmapped I/O */
+	if (mmapped && base < 0xc8000) {
+		printk(KERN_ERR "i2c-elektor: incorrect base address (0x%0X) specified for mmapped I/O.\n", base);
+		return -ENODEV;
+	}
+
+	printk(KERN_INFO "i2c-elektor: i2c pcf8584-isa adapter driver\n");
+
+	if (base == 0) {
+		base = DEFAULT_BASE;
+	}
+
+	init_waitqueue_head(&pcf_wait);
+	if (pcf_isa_init())
+		return -ENODEV;
+	if (i2c_pcf_add_bus(&pcf_isa_ops) < 0)
+		goto fail;
+	
+	printk(KERN_ERR "i2c-elektor: found device at %#x.\n", base);
+
+	return 0;
+
+ fail:
+	if (irq > 0) {
+		disable_irq(irq);
+		free_irq(irq, NULL);
+	}
+
+	if (!mmapped)
+		release_region(base , 2);
+	return -ENODEV;
+}
+
+static void i2c_pcfisa_exit(void)
+{
+	i2c_pcf_del_bus(&pcf_isa_ops);
+
+	if (irq > 0) {
+		disable_irq(irq);
+		free_irq(irq, NULL);
+	}
+
+	if (!mmapped)
+		release_region(base , 2);
+}
+
+MODULE_AUTHOR("Hans Berglund <hb@spacetec.no>");
+MODULE_DESCRIPTION("I2C-Bus adapter routines for PCF8584 ISA bus adapter");
+MODULE_LICENSE("GPL");
+
+module_param(base, int, 0);
+module_param(irq, int, 0);
+module_param(clock, int, 0);
+module_param(own, int, 0);
+module_param(mmapped, int, 0);
+
+module_init(i2c_pcfisa_init);
+module_exit(i2c_pcfisa_exit);
diff --git a/drivers/i2c/busses/i2c-frodo.c b/drivers/i2c/busses/i2c-frodo.c
new file mode 100644
index 00000000000..e093829a0bf
--- /dev/null
+++ b/drivers/i2c/busses/i2c-frodo.c
@@ -0,0 +1,86 @@
+
+/*
+ * linux/drivers/i2c/i2c-frodo.c
+ *
+ * Author: Abraham van der Merwe <abraham@2d3d.co.za>
+ *
+ * An I2C adapter driver for the 2d3D, Inc. StrongARM SA-1110
+ * Development board (Frodo).
+ *
+ * This source code is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/i2c-algo-bit.h>
+#include <asm/hardware.h>
+
+
+static void frodo_setsda (void *data,int state)
+{
+	if (state)
+		FRODO_CPLD_I2C |= FRODO_I2C_SDA_OUT;
+	else
+		FRODO_CPLD_I2C &= ~FRODO_I2C_SDA_OUT;
+}
+
+static void frodo_setscl (void *data,int state)
+{
+	if (state)
+		FRODO_CPLD_I2C |= FRODO_I2C_SCL_OUT;
+	else
+		FRODO_CPLD_I2C &= ~FRODO_I2C_SCL_OUT;
+}
+
+static int frodo_getsda (void *data)
+{
+	return ((FRODO_CPLD_I2C & FRODO_I2C_SDA_IN) != 0);
+}
+
+static int frodo_getscl (void *data)
+{
+	return ((FRODO_CPLD_I2C & FRODO_I2C_SCL_IN) != 0);
+}
+
+static struct i2c_algo_bit_data bit_frodo_data = {
+	.setsda		= frodo_setsda,
+	.setscl		= frodo_setscl,
+	.getsda		= frodo_getsda,
+	.getscl		= frodo_getscl,
+	.udelay		= 80,
+	.mdelay		= 80,
+	.timeout	= HZ
+};
+
+static struct i2c_adapter frodo_ops = {
+	.owner			= THIS_MODULE,
+	.id			= I2C_HW_B_FRODO,
+	.algo_data		= &bit_frodo_data,
+	.dev			= {
+		.name		= "Frodo adapter driver",
+	},
+};
+
+static int __init i2c_frodo_init (void)
+{
+	return i2c_bit_add_bus(&frodo_ops);
+}
+
+static void __exit i2c_frodo_exit (void)
+{
+	i2c_bit_del_bus(&frodo_ops);
+}
+
+MODULE_AUTHOR ("Abraham van der Merwe <abraham@2d3d.co.za>");
+MODULE_DESCRIPTION ("I2C-Bus adapter routines for Frodo");
+MODULE_LICENSE ("GPL");
+
+module_init (i2c_frodo_init);
+module_exit (i2c_frodo_exit);
+
diff --git a/drivers/i2c/busses/i2c-hydra.c b/drivers/i2c/busses/i2c-hydra.c
new file mode 100644
index 00000000000..e0cb3b0f92f
--- /dev/null
+++ b/drivers/i2c/busses/i2c-hydra.c
@@ -0,0 +1,183 @@
+/*
+    i2c-hydra.c - Part of lm_sensors,  Linux kernel modules
+                  for hardware monitoring
+
+    i2c Support for the Apple `Hydra' Mac I/O
+
+    Copyright (c) 1999-2004 Geert Uytterhoeven <geert@linux-m68k.org>
+
+    Based on i2c Support for Via Technologies 82C586B South Bridge
+    Copyright (c) 1998, 1999 Kyösti Mälkki <kmalkki@cc.hut.fi>
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/types.h>
+#include <linux/i2c.h>
+#include <linux/i2c-algo-bit.h>
+#include <linux/init.h>
+#include <asm/io.h>
+#include <asm/hydra.h>
+
+
+#define HYDRA_CPD_PD0	0x00000001	/* CachePD lines */
+#define HYDRA_CPD_PD1	0x00000002
+#define HYDRA_CPD_PD2	0x00000004
+#define HYDRA_CPD_PD3	0x00000008
+
+#define HYDRA_SCLK	HYDRA_CPD_PD0
+#define HYDRA_SDAT	HYDRA_CPD_PD1
+#define HYDRA_SCLK_OE	0x00000010
+#define HYDRA_SDAT_OE	0x00000020
+
+static inline void pdregw(void *data, u32 val)
+{
+	struct Hydra *hydra = (struct Hydra *)data;
+	writel(val, &hydra->CachePD);
+}
+
+static inline u32 pdregr(void *data)
+{
+	struct Hydra *hydra = (struct Hydra *)data;
+	return readl(&hydra->CachePD);
+}
+
+static void hydra_bit_setscl(void *data, int state)
+{
+	u32 val = pdregr(data);
+	if (state)
+		val &= ~HYDRA_SCLK_OE;
+	else {
+		val &= ~HYDRA_SCLK;
+		val |= HYDRA_SCLK_OE;
+	}
+	pdregw(data, val);
+}
+
+static void hydra_bit_setsda(void *data, int state)
+{
+	u32 val = pdregr(data);
+	if (state)
+		val &= ~HYDRA_SDAT_OE;
+	else {
+		val &= ~HYDRA_SDAT;
+		val |= HYDRA_SDAT_OE;
+	}
+	pdregw(data, val);
+}
+
+static int hydra_bit_getscl(void *data)
+{
+	return (pdregr(data) & HYDRA_SCLK) != 0;
+}
+
+static int hydra_bit_getsda(void *data)
+{
+	return (pdregr(data) & HYDRA_SDAT) != 0;
+}
+
+/* ------------------------------------------------------------------------ */
+
+static struct i2c_algo_bit_data hydra_bit_data = {
+	.setsda		= hydra_bit_setsda,
+	.setscl		= hydra_bit_setscl,
+	.getsda		= hydra_bit_getsda,
+	.getscl		= hydra_bit_getscl,
+	.udelay		= 5,
+	.mdelay		= 5,
+	.timeout	= HZ
+};
+
+static struct i2c_adapter hydra_adap = {
+	.owner		= THIS_MODULE,
+	.name		= "Hydra i2c",
+	.id		= I2C_HW_B_HYDRA,
+	.algo_data	= &hydra_bit_data,
+};
+
+static struct pci_device_id hydra_ids[] = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_APPLE, PCI_DEVICE_ID_APPLE_HYDRA) },
+	{ 0, }
+};
+
+MODULE_DEVICE_TABLE (pci, hydra_ids);
+
+static int __devinit hydra_probe(struct pci_dev *dev,
+				 const struct pci_device_id *id)
+{
+	unsigned long base = pci_resource_start(dev, 0);
+	int res;
+
+	if (!request_mem_region(base+offsetof(struct Hydra, CachePD), 4,
+				hydra_adap.name))
+		return -EBUSY;
+
+	hydra_bit_data.data = ioremap(base, pci_resource_len(dev, 0));
+	if (hydra_bit_data.data == NULL) {
+		release_mem_region(base+offsetof(struct Hydra, CachePD), 4);
+		return -ENODEV;
+	}
+
+	pdregw(hydra_bit_data.data, 0);		/* clear SCLK_OE and SDAT_OE */
+	hydra_adap.dev.parent = &dev->dev;
+	res = i2c_bit_add_bus(&hydra_adap);
+	if (res < 0) {
+		iounmap(hydra_bit_data.data);
+		release_mem_region(base+offsetof(struct Hydra, CachePD), 4);
+		return res;
+	}
+	return 0;
+}
+
+static void __devexit hydra_remove(struct pci_dev *dev)
+{
+	pdregw(hydra_bit_data.data, 0);		/* clear SCLK_OE and SDAT_OE */
+	i2c_bit_del_bus(&hydra_adap);
+	iounmap(hydra_bit_data.data);
+	release_mem_region(pci_resource_start(dev, 0)+
+			   offsetof(struct Hydra, CachePD), 4);
+}
+
+
+static struct pci_driver hydra_driver = {
+	.name		= "hydra_smbus",
+	.id_table	= hydra_ids,
+	.probe		= hydra_probe,
+	.remove		= __devexit_p(hydra_remove),
+};
+
+static int __init i2c_hydra_init(void)
+{
+	return pci_register_driver(&hydra_driver);
+}
+
+
+static void __exit i2c_hydra_exit(void)
+{
+	pci_unregister_driver(&hydra_driver);
+}
+
+
+
+MODULE_AUTHOR("Geert Uytterhoeven <geert@linux-m68k.org>");
+MODULE_DESCRIPTION("i2c for Apple Hydra Mac I/O");
+MODULE_LICENSE("GPL");
+
+module_init(i2c_hydra_init);
+module_exit(i2c_hydra_exit);
+
diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c
new file mode 100644
index 00000000000..6ec8b21965e
--- /dev/null
+++ b/drivers/i2c/busses/i2c-i801.c
@@ -0,0 +1,613 @@
+/*
+    i801.c - Part of lm_sensors, Linux kernel modules for hardware
+              monitoring
+    Copyright (c) 1998 - 2002  Frodo Looijaard <frodol@dds.nl>,
+    Philip Edelbrock <phil@netroedge.com>, and Mark D. Studebaker
+    <mdsxyz123@yahoo.com>
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+/*
+    SUPPORTED DEVICES	PCI ID
+    82801AA		2413           
+    82801AB		2423           
+    82801BA		2443           
+    82801CA/CAM		2483           
+    82801DB		24C3   (HW PEC supported, 32 byte buffer not supported)
+    82801EB		24D3   (HW PEC supported, 32 byte buffer not supported)
+    6300ESB		25A4
+    ICH6		266A
+    ICH7		27DA
+    This driver supports several versions of Intel's I/O Controller Hubs (ICH).
+    For SMBus support, they are similar to the PIIX4 and are part
+    of Intel's '810' and other chipsets.
+    See the doc/busses/i2c-i801 file for details.
+    I2C Block Read and Process Call are not supported.
+*/
+
+/* Note: we assume there can only be one I801, with one SMBus interface */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/stddef.h>
+#include <linux/delay.h>
+#include <linux/sched.h>
+#include <linux/ioport.h>
+#include <linux/init.h>
+#include <linux/i2c.h>
+#include <asm/io.h>
+
+#ifdef I2C_FUNC_SMBUS_BLOCK_DATA_PEC
+#define HAVE_PEC
+#endif
+
+/* I801 SMBus address offsets */
+#define SMBHSTSTS	(0 + i801_smba)
+#define SMBHSTCNT	(2 + i801_smba)
+#define SMBHSTCMD	(3 + i801_smba)
+#define SMBHSTADD	(4 + i801_smba)
+#define SMBHSTDAT0	(5 + i801_smba)
+#define SMBHSTDAT1	(6 + i801_smba)
+#define SMBBLKDAT	(7 + i801_smba)
+#define SMBPEC		(8 + i801_smba)	/* ICH4 only */
+#define SMBAUXSTS	(12 + i801_smba)	/* ICH4 only */
+#define SMBAUXCTL	(13 + i801_smba)	/* ICH4 only */
+
+/* PCI Address Constants */
+#define SMBBA		0x020
+#define SMBHSTCFG	0x040
+#define SMBREV		0x008
+
+/* Host configuration bits for SMBHSTCFG */
+#define SMBHSTCFG_HST_EN	1
+#define SMBHSTCFG_SMB_SMI_EN	2
+#define SMBHSTCFG_I2C_EN	4
+
+/* Other settings */
+#define MAX_TIMEOUT		100
+#define ENABLE_INT9		0	/* set to 0x01 to enable - untested */
+
+/* I801 command constants */
+#define I801_QUICK		0x00
+#define I801_BYTE		0x04
+#define I801_BYTE_DATA		0x08
+#define I801_WORD_DATA		0x0C
+#define I801_PROC_CALL		0x10	/* later chips only, unimplemented */
+#define I801_BLOCK_DATA		0x14
+#define I801_I2C_BLOCK_DATA	0x18	/* unimplemented */
+#define I801_BLOCK_LAST		0x34
+#define I801_I2C_BLOCK_LAST	0x38	/* unimplemented */
+#define I801_START		0x40
+#define I801_PEC_EN		0x80	/* ICH4 only */
+
+/* insmod parameters */
+
+/* If force_addr is set to anything different from 0, we forcibly enable
+   the I801 at the given address. VERY DANGEROUS! */
+static u16 force_addr;
+module_param(force_addr, ushort, 0);
+MODULE_PARM_DESC(force_addr,
+		 "Forcibly enable the I801 at the given address. "
+		 "EXTREMELY DANGEROUS!");
+
+static int i801_transaction(void);
+static int i801_block_transaction(union i2c_smbus_data *data,
+				  char read_write, int command);
+
+static unsigned short i801_smba;
+static struct pci_dev *I801_dev;
+static int isich4;
+
+static int i801_setup(struct pci_dev *dev)
+{
+	int error_return = 0;
+	unsigned char temp;
+
+	/* Note: we keep on searching until we have found 'function 3' */
+	if(PCI_FUNC(dev->devfn) != 3)
+		return -ENODEV;
+
+	I801_dev = dev;
+	if ((dev->device == PCI_DEVICE_ID_INTEL_82801DB_3) ||
+	    (dev->device == PCI_DEVICE_ID_INTEL_82801EB_3) ||
+	    (dev->device == PCI_DEVICE_ID_INTEL_ESB_4))
+		isich4 = 1;
+	else
+		isich4 = 0;
+
+	/* Determine the address of the SMBus areas */
+	if (force_addr) {
+		i801_smba = force_addr & 0xfff0;
+	} else {
+		pci_read_config_word(I801_dev, SMBBA, &i801_smba);
+		i801_smba &= 0xfff0;
+		if(i801_smba == 0) {
+			dev_err(&dev->dev, "SMB base address uninitialized"
+				"- upgrade BIOS or use force_addr=0xaddr\n");
+			return -ENODEV;
+		}
+	}
+
+	if (!request_region(i801_smba, (isich4 ? 16 : 8), "i801-smbus")) {
+		dev_err(&dev->dev, "I801_smb region 0x%x already in use!\n",
+			i801_smba);
+		error_return = -EBUSY;
+		goto END;
+	}
+
+	pci_read_config_byte(I801_dev, SMBHSTCFG, &temp);
+	temp &= ~SMBHSTCFG_I2C_EN;	/* SMBus timing */
+	pci_write_config_byte(I801_dev, SMBHSTCFG, temp);
+
+	/* If force_addr is set, we program the new address here. Just to make
+	   sure, we disable the device first. */
+	if (force_addr) {
+		pci_write_config_byte(I801_dev, SMBHSTCFG, temp & 0xfe);
+		pci_write_config_word(I801_dev, SMBBA, i801_smba);
+		pci_write_config_byte(I801_dev, SMBHSTCFG, temp | 0x01);
+		dev_warn(&dev->dev, "WARNING: I801 SMBus interface set to "
+			"new address %04x!\n", i801_smba);
+	} else if ((temp & 1) == 0) {
+		pci_write_config_byte(I801_dev, SMBHSTCFG, temp | 1);
+		dev_warn(&dev->dev, "enabling SMBus device\n");
+	}
+
+	if (temp & 0x02)
+		dev_dbg(&dev->dev, "I801 using Interrupt SMI# for SMBus.\n");
+	else
+		dev_dbg(&dev->dev, "I801 using PCI Interrupt for SMBus.\n");
+
+	pci_read_config_byte(I801_dev, SMBREV, &temp);
+	dev_dbg(&dev->dev, "SMBREV = 0x%X\n", temp);
+	dev_dbg(&dev->dev, "I801_smba = 0x%X\n", i801_smba);
+
+END:
+	return error_return;
+}
+
+static int i801_transaction(void)
+{
+	int temp;
+	int result = 0;
+	int timeout = 0;
+
+	dev_dbg(&I801_dev->dev, "Transaction (pre): CNT=%02x, CMD=%02x,"
+		"ADD=%02x, DAT0=%02x, DAT1=%02x\n", inb_p(SMBHSTCNT),
+		inb_p(SMBHSTCMD), inb_p(SMBHSTADD), inb_p(SMBHSTDAT0),
+		inb_p(SMBHSTDAT1));
+
+	/* Make sure the SMBus host is ready to start transmitting */
+	/* 0x1f = Failed, Bus_Err, Dev_Err, Intr, Host_Busy */
+	if ((temp = (0x1f & inb_p(SMBHSTSTS))) != 0x00) {
+		dev_dbg(&I801_dev->dev, "SMBus busy (%02x). Resetting... \n",
+			temp);
+		outb_p(temp, SMBHSTSTS);
+		if ((temp = (0x1f & inb_p(SMBHSTSTS))) != 0x00) {
+			dev_dbg(&I801_dev->dev, "Failed! (%02x)\n", temp);
+			return -1;
+		} else {
+			dev_dbg(&I801_dev->dev, "Successfull!\n");
+		}
+	}
+
+	outb_p(inb(SMBHSTCNT) | I801_START, SMBHSTCNT);
+
+	/* We will always wait for a fraction of a second! */
+	do {
+		msleep(1);
+		temp = inb_p(SMBHSTSTS);
+	} while ((temp & 0x01) && (timeout++ < MAX_TIMEOUT));
+
+	/* If the SMBus is still busy, we give up */
+	if (timeout >= MAX_TIMEOUT) {
+		dev_dbg(&I801_dev->dev, "SMBus Timeout!\n");
+		result = -1;
+	}
+
+	if (temp & 0x10) {
+		result = -1;
+		dev_dbg(&I801_dev->dev, "Error: Failed bus transaction\n");
+	}
+
+	if (temp & 0x08) {
+		result = -1;
+		dev_err(&I801_dev->dev, "Bus collision! SMBus may be locked "
+			"until next hard reset. (sorry!)\n");
+		/* Clock stops and slave is stuck in mid-transmission */
+	}
+
+	if (temp & 0x04) {
+		result = -1;
+		dev_dbg(&I801_dev->dev, "Error: no response!\n");
+	}
+
+	if ((inb_p(SMBHSTSTS) & 0x1f) != 0x00)
+		outb_p(inb(SMBHSTSTS), SMBHSTSTS);
+
+	if ((temp = (0x1f & inb_p(SMBHSTSTS))) != 0x00) {
+		dev_dbg(&I801_dev->dev, "Failed reset at end of transaction"
+			"(%02x)\n", temp);
+	}
+	dev_dbg(&I801_dev->dev, "Transaction (post): CNT=%02x, CMD=%02x, "
+		"ADD=%02x, DAT0=%02x, DAT1=%02x\n", inb_p(SMBHSTCNT),
+		inb_p(SMBHSTCMD), inb_p(SMBHSTADD), inb_p(SMBHSTDAT0),
+		inb_p(SMBHSTDAT1));
+	return result;
+}
+
+/* All-inclusive block transaction function */
+static int i801_block_transaction(union i2c_smbus_data *data, char read_write,
+				  int command)
+{
+	int i, len;
+	int smbcmd;
+	int temp;
+	int result = 0;
+	int timeout;
+	unsigned char hostc, errmask;
+
+	if (command == I2C_SMBUS_I2C_BLOCK_DATA) {
+		if (read_write == I2C_SMBUS_WRITE) {
+			/* set I2C_EN bit in configuration register */
+			pci_read_config_byte(I801_dev, SMBHSTCFG, &hostc);
+			pci_write_config_byte(I801_dev, SMBHSTCFG,
+					      hostc | SMBHSTCFG_I2C_EN);
+		} else {
+			dev_err(&I801_dev->dev,
+				"I2C_SMBUS_I2C_BLOCK_READ not DB!\n");
+			return -1;
+		}
+	}
+
+	if (read_write == I2C_SMBUS_WRITE) {
+		len = data->block[0];
+		if (len < 1)
+			len = 1;
+		if (len > 32)
+			len = 32;
+		outb_p(len, SMBHSTDAT0);
+		outb_p(data->block[1], SMBBLKDAT);
+	} else {
+		len = 32;	/* max for reads */
+	}
+
+	if(isich4 && command != I2C_SMBUS_I2C_BLOCK_DATA) {
+		/* set 32 byte buffer */
+	}
+
+	for (i = 1; i <= len; i++) {
+		if (i == len && read_write == I2C_SMBUS_READ)
+			smbcmd = I801_BLOCK_LAST;
+		else
+			smbcmd = I801_BLOCK_DATA;
+		outb_p(smbcmd | ENABLE_INT9, SMBHSTCNT);
+
+		dev_dbg(&I801_dev->dev, "Block (pre %d): CNT=%02x, CMD=%02x, "
+			"ADD=%02x, DAT0=%02x, BLKDAT=%02x\n", i,
+			inb_p(SMBHSTCNT), inb_p(SMBHSTCMD), inb_p(SMBHSTADD),
+			inb_p(SMBHSTDAT0), inb_p(SMBBLKDAT));
+
+		/* Make sure the SMBus host is ready to start transmitting */
+		temp = inb_p(SMBHSTSTS);
+		if (i == 1) {
+			/* Erronenous conditions before transaction: 
+			 * Byte_Done, Failed, Bus_Err, Dev_Err, Intr, Host_Busy */
+			errmask=0x9f; 
+		} else {
+			/* Erronenous conditions during transaction: 
+			 * Failed, Bus_Err, Dev_Err, Intr */
+			errmask=0x1e; 
+		}
+		if (temp & errmask) {
+			dev_dbg(&I801_dev->dev, "SMBus busy (%02x). "
+				"Resetting... \n", temp);
+			outb_p(temp, SMBHSTSTS);
+			if (((temp = inb_p(SMBHSTSTS)) & errmask) != 0x00) {
+				dev_err(&I801_dev->dev,
+					"Reset failed! (%02x)\n", temp);
+				result = -1;
+                                goto END;
+			}
+			if (i != 1) {
+				/* if die in middle of block transaction, fail */
+				result = -1;
+				goto END;
+			}
+		}
+
+		if (i == 1)
+			outb_p(inb(SMBHSTCNT) | I801_START, SMBHSTCNT);
+
+		/* We will always wait for a fraction of a second! */
+		timeout = 0;
+		do {
+			temp = inb_p(SMBHSTSTS);
+			msleep(1);
+		}
+		    while ((!(temp & 0x80))
+			   && (timeout++ < MAX_TIMEOUT));
+
+		/* If the SMBus is still busy, we give up */
+		if (timeout >= MAX_TIMEOUT) {
+			result = -1;
+			dev_dbg(&I801_dev->dev, "SMBus Timeout!\n");
+		}
+
+		if (temp & 0x10) {
+			result = -1;
+			dev_dbg(&I801_dev->dev,
+				"Error: Failed bus transaction\n");
+		} else if (temp & 0x08) {
+			result = -1;
+			dev_err(&I801_dev->dev, "Bus collision!\n");
+		} else if (temp & 0x04) {
+			result = -1;
+			dev_dbg(&I801_dev->dev, "Error: no response!\n");
+		}
+
+		if (i == 1 && read_write == I2C_SMBUS_READ) {
+			len = inb_p(SMBHSTDAT0);
+			if (len < 1)
+				len = 1;
+			if (len > 32)
+				len = 32;
+			data->block[0] = len;
+		}
+
+		/* Retrieve/store value in SMBBLKDAT */
+		if (read_write == I2C_SMBUS_READ)
+			data->block[i] = inb_p(SMBBLKDAT);
+		if (read_write == I2C_SMBUS_WRITE && i+1 <= len)
+			outb_p(data->block[i+1], SMBBLKDAT);
+		if ((temp & 0x9e) != 0x00)
+			outb_p(temp, SMBHSTSTS);  /* signals SMBBLKDAT ready */
+
+		if ((temp = (0x1e & inb_p(SMBHSTSTS))) != 0x00) {
+			dev_dbg(&I801_dev->dev,
+				"Bad status (%02x) at end of transaction\n",
+				temp);
+		}
+		dev_dbg(&I801_dev->dev, "Block (post %d): CNT=%02x, CMD=%02x, "
+			"ADD=%02x, DAT0=%02x, BLKDAT=%02x\n", i,
+			inb_p(SMBHSTCNT), inb_p(SMBHSTCMD), inb_p(SMBHSTADD),
+			inb_p(SMBHSTDAT0), inb_p(SMBBLKDAT));
+
+		if (result < 0)
+			goto END;
+	}
+
+#ifdef HAVE_PEC
+	if(isich4 && command == I2C_SMBUS_BLOCK_DATA_PEC) {
+		/* wait for INTR bit as advised by Intel */
+		timeout = 0;
+		do {
+			temp = inb_p(SMBHSTSTS);
+			msleep(1);
+		} while ((!(temp & 0x02))
+			   && (timeout++ < MAX_TIMEOUT));
+
+		if (timeout >= MAX_TIMEOUT) {
+			dev_dbg(&I801_dev->dev, "PEC Timeout!\n");
+		}
+		outb_p(temp, SMBHSTSTS); 
+	}
+#endif
+	result = 0;
+END:
+	if (command == I2C_SMBUS_I2C_BLOCK_DATA) {
+		/* restore saved configuration register value */
+		pci_write_config_byte(I801_dev, SMBHSTCFG, hostc);
+	}
+	return result;
+}
+
+/* Return -1 on error. */
+static s32 i801_access(struct i2c_adapter * adap, u16 addr,
+		       unsigned short flags, char read_write, u8 command,
+		       int size, union i2c_smbus_data * data)
+{
+	int hwpec = 0;
+	int block = 0;
+	int ret, xact = 0;
+
+#ifdef HAVE_PEC
+	if(isich4)
+		hwpec = (flags & I2C_CLIENT_PEC) != 0;
+#endif
+
+	switch (size) {
+	case I2C_SMBUS_QUICK:
+		outb_p(((addr & 0x7f) << 1) | (read_write & 0x01),
+		       SMBHSTADD);
+		xact = I801_QUICK;
+		break;
+	case I2C_SMBUS_BYTE:
+		outb_p(((addr & 0x7f) << 1) | (read_write & 0x01),
+		       SMBHSTADD);
+		if (read_write == I2C_SMBUS_WRITE)
+			outb_p(command, SMBHSTCMD);
+		xact = I801_BYTE;
+		break;
+	case I2C_SMBUS_BYTE_DATA:
+		outb_p(((addr & 0x7f) << 1) | (read_write & 0x01),
+		       SMBHSTADD);
+		outb_p(command, SMBHSTCMD);
+		if (read_write == I2C_SMBUS_WRITE)
+			outb_p(data->byte, SMBHSTDAT0);
+		xact = I801_BYTE_DATA;
+		break;
+	case I2C_SMBUS_WORD_DATA:
+		outb_p(((addr & 0x7f) << 1) | (read_write & 0x01),
+		       SMBHSTADD);
+		outb_p(command, SMBHSTCMD);
+		if (read_write == I2C_SMBUS_WRITE) {
+			outb_p(data->word & 0xff, SMBHSTDAT0);
+			outb_p((data->word & 0xff00) >> 8, SMBHSTDAT1);
+		}
+		xact = I801_WORD_DATA;
+		break;
+	case I2C_SMBUS_BLOCK_DATA:
+	case I2C_SMBUS_I2C_BLOCK_DATA:
+#ifdef HAVE_PEC
+	case I2C_SMBUS_BLOCK_DATA_PEC:
+		if(hwpec && size == I2C_SMBUS_BLOCK_DATA)
+			size = I2C_SMBUS_BLOCK_DATA_PEC;
+#endif
+		outb_p(((addr & 0x7f) << 1) | (read_write & 0x01),
+		       SMBHSTADD);
+		outb_p(command, SMBHSTCMD);
+		block = 1;
+		break;
+	case I2C_SMBUS_PROC_CALL:
+	default:
+		dev_err(&I801_dev->dev, "Unsupported transaction %d\n", size);
+		return -1;
+	}
+
+#ifdef HAVE_PEC
+	if(isich4 && hwpec) {
+		if(size != I2C_SMBUS_QUICK &&
+		   size != I2C_SMBUS_I2C_BLOCK_DATA)
+			outb_p(1, SMBAUXCTL);	/* enable HW PEC */
+	}
+#endif
+	if(block)
+		ret = i801_block_transaction(data, read_write, size);
+	else {
+		outb_p(xact | ENABLE_INT9, SMBHSTCNT);
+		ret = i801_transaction();
+	}
+
+#ifdef HAVE_PEC
+	if(isich4 && hwpec) {
+		if(size != I2C_SMBUS_QUICK &&
+		   size != I2C_SMBUS_I2C_BLOCK_DATA)
+			outb_p(0, SMBAUXCTL);
+	}
+#endif
+
+	if(block)
+		return ret;
+	if(ret)
+		return -1;
+	if ((read_write == I2C_SMBUS_WRITE) || (xact == I801_QUICK))
+		return 0;
+
+	switch (xact & 0x7f) {
+	case I801_BYTE:	/* Result put in SMBHSTDAT0 */
+	case I801_BYTE_DATA:
+		data->byte = inb_p(SMBHSTDAT0);
+		break;
+	case I801_WORD_DATA:
+		data->word = inb_p(SMBHSTDAT0) + (inb_p(SMBHSTDAT1) << 8);
+		break;
+	}
+	return 0;
+}
+
+
+static u32 i801_func(struct i2c_adapter *adapter)
+{
+	return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE |
+	    I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA |
+	    I2C_FUNC_SMBUS_BLOCK_DATA | I2C_FUNC_SMBUS_WRITE_I2C_BLOCK
+#ifdef HAVE_PEC
+	     | (isich4 ? I2C_FUNC_SMBUS_BLOCK_DATA_PEC |
+	                 I2C_FUNC_SMBUS_HWPEC_CALC
+	               : 0)
+#endif
+	    ;
+}
+
+static struct i2c_algorithm smbus_algorithm = {
+	.name		= "Non-I2C SMBus adapter",
+	.id		= I2C_ALGO_SMBUS,
+	.smbus_xfer	= i801_access,
+	.functionality	= i801_func,
+};
+
+static struct i2c_adapter i801_adapter = {
+	.owner		= THIS_MODULE,
+	.class		= I2C_CLASS_HWMON,
+	.algo		= &smbus_algorithm,
+	.name		= "unset",
+};
+
+static struct pci_device_id i801_ids[] = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801AA_3) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801AB_3) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801BA_2) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_3) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_3) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801EB_3) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB_4) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_16) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_17) },
+	{ 0, }
+};
+
+MODULE_DEVICE_TABLE (pci, i801_ids);
+
+static int __devinit i801_probe(struct pci_dev *dev, const struct pci_device_id *id)
+{
+
+	if (i801_setup(dev)) {
+		dev_warn(&dev->dev,
+			"I801 not detected, module not inserted.\n");
+		return -ENODEV;
+	}
+
+	/* set up the driverfs linkage to our parent device */
+	i801_adapter.dev.parent = &dev->dev;
+
+	snprintf(i801_adapter.name, I2C_NAME_SIZE,
+		"SMBus I801 adapter at %04x", i801_smba);
+	return i2c_add_adapter(&i801_adapter);
+}
+
+static void __devexit i801_remove(struct pci_dev *dev)
+{
+	i2c_del_adapter(&i801_adapter);
+	release_region(i801_smba, (isich4 ? 16 : 8));
+}
+
+static struct pci_driver i801_driver = {
+	.name		= "i801_smbus",
+	.id_table	= i801_ids,
+	.probe		= i801_probe,
+	.remove		= __devexit_p(i801_remove),
+};
+
+static int __init i2c_i801_init(void)
+{
+	return pci_register_driver(&i801_driver);
+}
+
+static void __exit i2c_i801_exit(void)
+{
+	pci_unregister_driver(&i801_driver);
+}
+
+MODULE_AUTHOR ("Frodo Looijaard <frodol@dds.nl>, "
+		"Philip Edelbrock <phil@netroedge.com>, "
+		"and Mark D. Studebaker <mdsxyz123@yahoo.com>");
+MODULE_DESCRIPTION("I801 SMBus driver");
+MODULE_LICENSE("GPL");
+
+module_init(i2c_i801_init);
+module_exit(i2c_i801_exit);
diff --git a/drivers/i2c/busses/i2c-i810.c b/drivers/i2c/busses/i2c-i810.c
new file mode 100644
index 00000000000..ef358bd9c3d
--- /dev/null
+++ b/drivers/i2c/busses/i2c-i810.c
@@ -0,0 +1,260 @@
+/*
+    i2c-i810.c - Part of lm_sensors, Linux kernel modules for hardware
+              monitoring
+    Copyright (c) 1998, 1999, 2000  Frodo Looijaard <frodol@dds.nl>,
+    Philip Edelbrock <phil@netroedge.com>,
+    Ralph Metzler <rjkm@thp.uni-koeln.de>, and
+    Mark D. Studebaker <mdsxyz123@yahoo.com>
+    
+    Based on code written by Ralph Metzler <rjkm@thp.uni-koeln.de> and
+    Simon Vogl
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+/*
+   This interfaces to the I810/I815 to provide access to
+   the DDC Bus and the I2C Bus.
+
+   SUPPORTED DEVICES	PCI ID
+   i810AA		7121           
+   i810AB		7123           
+   i810E		7125           
+   i815			1132           
+*/
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/i2c.h>
+#include <linux/i2c-algo-bit.h>
+#include <asm/io.h>
+
+/* GPIO register locations */
+#define I810_IOCONTROL_OFFSET	0x5000
+#define I810_HVSYNC		0x00	/* not used */
+#define I810_GPIOA		0x10
+#define I810_GPIOB		0x14
+
+/* bit locations in the registers */
+#define SCL_DIR_MASK		0x0001
+#define SCL_DIR			0x0002
+#define SCL_VAL_MASK		0x0004
+#define SCL_VAL_OUT		0x0008
+#define SCL_VAL_IN		0x0010
+#define SDA_DIR_MASK		0x0100
+#define SDA_DIR			0x0200
+#define SDA_VAL_MASK		0x0400
+#define SDA_VAL_OUT		0x0800
+#define SDA_VAL_IN		0x1000
+
+/* initialization states */
+#define INIT1			0x1
+#define INIT2			0x2
+#define INIT3			0x4
+
+/* delays */
+#define CYCLE_DELAY		10
+#define TIMEOUT			(HZ / 2)
+
+static void __iomem *ioaddr;
+
+/* The i810 GPIO registers have individual masks for each bit
+   so we never have to read before writing. Nice. */
+
+static void bit_i810i2c_setscl(void *data, int val)
+{
+	writel((val ? SCL_VAL_OUT : 0) | SCL_DIR | SCL_DIR_MASK | SCL_VAL_MASK,
+	     ioaddr + I810_GPIOB);
+	readl(ioaddr + I810_GPIOB);	/* flush posted write */
+}
+
+static void bit_i810i2c_setsda(void *data, int val)
+{
+ 	writel((val ? SDA_VAL_OUT : 0) | SDA_DIR | SDA_DIR_MASK | SDA_VAL_MASK,
+	     ioaddr + I810_GPIOB);
+	readl(ioaddr + I810_GPIOB);	/* flush posted write */
+}
+
+/* The GPIO pins are open drain, so the pins could always remain outputs.
+   However, some chip versions don't latch the inputs unless they
+   are set as inputs.
+   We rely on the i2c-algo-bit routines to set the pins high before
+   reading the input from other chips. Following guidance in the 815
+   prog. ref. guide, we do a "dummy write" of 0 to the register before
+   reading which forces the input value to be latched. We presume this
+   applies to the 810 as well; shouldn't hurt anyway. This is necessary to get
+   i2c_algo_bit bit_test=1 to pass. */
+
+static int bit_i810i2c_getscl(void *data)
+{
+	writel(SCL_DIR_MASK, ioaddr + I810_GPIOB);
+	writel(0, ioaddr + I810_GPIOB);
+	return (0 != (readl(ioaddr + I810_GPIOB) & SCL_VAL_IN));
+}
+
+static int bit_i810i2c_getsda(void *data)
+{
+	writel(SDA_DIR_MASK, ioaddr + I810_GPIOB);
+	writel(0, ioaddr + I810_GPIOB);
+	return (0 != (readl(ioaddr + I810_GPIOB) & SDA_VAL_IN));
+}
+
+static void bit_i810ddc_setscl(void *data, int val)
+{
+	writel((val ? SCL_VAL_OUT : 0) | SCL_DIR | SCL_DIR_MASK | SCL_VAL_MASK,
+	     ioaddr + I810_GPIOA);
+	readl(ioaddr + I810_GPIOA);	/* flush posted write */
+}
+
+static void bit_i810ddc_setsda(void *data, int val)
+{
+ 	writel((val ? SDA_VAL_OUT : 0) | SDA_DIR | SDA_DIR_MASK | SDA_VAL_MASK,
+	     ioaddr + I810_GPIOA);
+	readl(ioaddr + I810_GPIOA);	/* flush posted write */
+}
+
+static int bit_i810ddc_getscl(void *data)
+{
+	writel(SCL_DIR_MASK, ioaddr + I810_GPIOA);
+	writel(0, ioaddr + I810_GPIOA);
+	return (0 != (readl(ioaddr + I810_GPIOA) & SCL_VAL_IN));
+}
+
+static int bit_i810ddc_getsda(void *data)
+{
+	writel(SDA_DIR_MASK, ioaddr + I810_GPIOA);
+	writel(0, ioaddr + I810_GPIOA);
+	return (0 != (readl(ioaddr + I810_GPIOA) & SDA_VAL_IN));
+}
+
+static int config_i810(struct pci_dev *dev)
+{
+	unsigned long cadr;
+
+	/* map I810 memory */
+	cadr = dev->resource[1].start;
+	cadr += I810_IOCONTROL_OFFSET;
+	cadr &= PCI_BASE_ADDRESS_MEM_MASK;
+	ioaddr = ioremap_nocache(cadr, 0x1000);
+	if (ioaddr) {
+		bit_i810i2c_setscl(NULL, 1);
+		bit_i810i2c_setsda(NULL, 1);
+		bit_i810ddc_setscl(NULL, 1);
+		bit_i810ddc_setsda(NULL, 1);
+		return 0;
+	}
+	return -ENODEV;
+}
+
+static struct i2c_algo_bit_data i810_i2c_bit_data = {
+	.setsda		= bit_i810i2c_setsda,
+	.setscl		= bit_i810i2c_setscl,
+	.getsda		= bit_i810i2c_getsda,
+	.getscl		= bit_i810i2c_getscl,
+	.udelay		= CYCLE_DELAY,
+	.mdelay		= CYCLE_DELAY,
+	.timeout	= TIMEOUT,
+};
+
+static struct i2c_adapter i810_i2c_adapter = {
+	.owner		= THIS_MODULE,
+	.name		= "I810/I815 I2C Adapter",
+	.algo_data	= &i810_i2c_bit_data,
+};
+
+static struct i2c_algo_bit_data i810_ddc_bit_data = {
+	.setsda		= bit_i810ddc_setsda,
+	.setscl		= bit_i810ddc_setscl,
+	.getsda		= bit_i810ddc_getsda,
+	.getscl		= bit_i810ddc_getscl,
+	.udelay		= CYCLE_DELAY,
+	.mdelay		= CYCLE_DELAY,
+	.timeout	= TIMEOUT,
+};
+
+static struct i2c_adapter i810_ddc_adapter = {
+	.owner		= THIS_MODULE,
+	.name		= "I810/I815 DDC Adapter",
+	.algo_data	= &i810_ddc_bit_data,
+};
+
+static struct pci_device_id i810_ids[] __devinitdata = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82810_IG1) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82810_IG3) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82810E_IG) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82815_CGC) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82845G_IG) },
+	{ 0, },
+};
+
+MODULE_DEVICE_TABLE (pci, i810_ids);
+
+static int __devinit i810_probe(struct pci_dev *dev, const struct pci_device_id *id)
+{
+	int retval;
+
+	retval = config_i810(dev);
+	if (retval)
+		return retval;
+	dev_info(&dev->dev, "i810/i815 i2c device found.\n");
+
+	/* set up the sysfs linkage to our parent device */
+	i810_i2c_adapter.dev.parent = &dev->dev;
+	i810_ddc_adapter.dev.parent = &dev->dev;
+
+	retval = i2c_bit_add_bus(&i810_i2c_adapter);
+	if (retval)
+		return retval;
+	retval = i2c_bit_add_bus(&i810_ddc_adapter);
+	if (retval)
+		i2c_bit_del_bus(&i810_i2c_adapter);
+	return retval;
+}
+
+static void __devexit i810_remove(struct pci_dev *dev)
+{
+	i2c_bit_del_bus(&i810_ddc_adapter);
+	i2c_bit_del_bus(&i810_i2c_adapter);
+	iounmap(ioaddr);
+}
+
+static struct pci_driver i810_driver = {
+	.name		= "i810_smbus",
+	.id_table	= i810_ids,
+	.probe		= i810_probe,
+	.remove		= __devexit_p(i810_remove),
+};
+
+static int __init i2c_i810_init(void)
+{
+	return pci_register_driver(&i810_driver);
+}
+
+static void __exit i2c_i810_exit(void)
+{
+	pci_unregister_driver(&i810_driver);
+}
+
+MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl>, "
+		"Philip Edelbrock <phil@netroedge.com>, "
+		"Ralph Metzler <rjkm@thp.uni-koeln.de>, "
+		"and Mark D. Studebaker <mdsxyz123@yahoo.com>");
+MODULE_DESCRIPTION("I810/I815 I2C/DDC driver");
+MODULE_LICENSE("GPL");
+
+module_init(i2c_i810_init);
+module_exit(i2c_i810_exit);
diff --git a/drivers/i2c/busses/i2c-ibm_iic.c b/drivers/i2c/busses/i2c-ibm_iic.c
new file mode 100644
index 00000000000..bb885215c08
--- /dev/null
+++ b/drivers/i2c/busses/i2c-ibm_iic.c
@@ -0,0 +1,819 @@
+/*
+ * drivers/i2c/i2c-ibm_iic.c
+ *
+ * Support for the IIC peripheral on IBM PPC 4xx
+ *
+ * Copyright (c) 2003, 2004 Zultys Technologies.
+ * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
+ *
+ * Based on original work by 
+ * 	Ian DaSilva  <idasilva@mvista.com>
+ *      Armin Kuster <akuster@mvista.com>
+ * 	Matt Porter  <mporter@mvista.com>
+ *
+ *      Copyright 2000-2003 MontaVista Software Inc.
+ *
+ * Original driver version was highly leveraged from i2c-elektor.c
+ *
+ *   	Copyright 1995-97 Simon G. Vogl
+ *                1998-99 Hans Berglund
+ *
+ *   	With some changes from Kyösti Mälkki <kmalkki@cc.hut.fi> 
+ *	and even Frodo Looijaard <frodol@dds.nl>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/ioport.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <asm/irq.h>
+#include <asm/io.h>
+#include <linux/i2c.h>
+#include <linux/i2c-id.h>
+#include <asm/ocp.h>
+#include <asm/ibm4xx.h>
+
+#include "i2c-ibm_iic.h"
+
+#define DRIVER_VERSION "2.1"
+
+MODULE_DESCRIPTION("IBM IIC driver v" DRIVER_VERSION);
+MODULE_LICENSE("GPL");
+
+static int iic_force_poll;
+module_param(iic_force_poll, bool, 0);
+MODULE_PARM_DESC(iic_force_poll, "Force polling mode");
+
+static int iic_force_fast;
+module_param(iic_force_fast, bool, 0);
+MODULE_PARM_DESC(iic_fast_poll, "Force fast mode (400 kHz)");
+
+#define DBG_LEVEL 0
+
+#ifdef DBG
+#undef DBG
+#endif
+
+#ifdef DBG2
+#undef DBG2
+#endif
+
+#if DBG_LEVEL > 0
+#  define DBG(f,x...)	printk(KERN_DEBUG "ibm-iic" f, ##x)
+#else
+#  define DBG(f,x...)	((void)0)
+#endif
+#if DBG_LEVEL > 1
+#  define DBG2(f,x...) 	DBG(f, ##x)
+#else
+#  define DBG2(f,x...) 	((void)0)
+#endif
+#if DBG_LEVEL > 2
+static void dump_iic_regs(const char* header, struct ibm_iic_private* dev)
+{
+	volatile struct iic_regs __iomem *iic = dev->vaddr;
+	printk(KERN_DEBUG "ibm-iic%d: %s\n", dev->idx, header);
+	printk(KERN_DEBUG "  cntl     = 0x%02x, mdcntl = 0x%02x\n"
+	       KERN_DEBUG "  sts      = 0x%02x, extsts = 0x%02x\n"
+	       KERN_DEBUG "  clkdiv   = 0x%02x, xfrcnt = 0x%02x\n"
+	       KERN_DEBUG "  xtcntlss = 0x%02x, directcntl = 0x%02x\n",
+		in_8(&iic->cntl), in_8(&iic->mdcntl), in_8(&iic->sts), 
+		in_8(&iic->extsts), in_8(&iic->clkdiv), in_8(&iic->xfrcnt), 
+		in_8(&iic->xtcntlss), in_8(&iic->directcntl));
+}
+#  define DUMP_REGS(h,dev)	dump_iic_regs((h),(dev))
+#else
+#  define DUMP_REGS(h,dev)	((void)0)
+#endif
+
+/* Bus timings (in ns) for bit-banging */
+static struct i2c_timings {
+	unsigned int hd_sta;
+	unsigned int su_sto;
+	unsigned int low;
+	unsigned int high;
+	unsigned int buf;
+} timings [] = {
+/* Standard mode (100 KHz) */
+{
+	.hd_sta	= 4000,
+	.su_sto	= 4000,
+	.low	= 4700,
+	.high	= 4000,
+	.buf	= 4700,
+},
+/* Fast mode (400 KHz) */
+{
+	.hd_sta = 600,
+	.su_sto	= 600,
+	.low 	= 1300,
+	.high 	= 600,
+	.buf	= 1300,
+}};
+
+/* Enable/disable interrupt generation */
+static inline void iic_interrupt_mode(struct ibm_iic_private* dev, int enable)
+{
+	out_8(&dev->vaddr->intmsk, enable ? INTRMSK_EIMTC : 0);
+}
+ 
+/*
+ * Initialize IIC interface.
+ */
+static void iic_dev_init(struct ibm_iic_private* dev)
+{
+	volatile struct iic_regs __iomem *iic = dev->vaddr;
+
+	DBG("%d: init\n", dev->idx);
+	
+	/* Clear master address */
+	out_8(&iic->lmadr, 0);
+	out_8(&iic->hmadr, 0);
+
+	/* Clear slave address */
+	out_8(&iic->lsadr, 0);
+	out_8(&iic->hsadr, 0);
+
+	/* Clear status & extended status */
+	out_8(&iic->sts, STS_SCMP | STS_IRQA);
+	out_8(&iic->extsts, EXTSTS_IRQP | EXTSTS_IRQD | EXTSTS_LA
+			    | EXTSTS_ICT | EXTSTS_XFRA);
+
+	/* Set clock divider */
+	out_8(&iic->clkdiv, dev->clckdiv);
+
+	/* Clear transfer count */
+	out_8(&iic->xfrcnt, 0);
+
+	/* Clear extended control and status */
+	out_8(&iic->xtcntlss, XTCNTLSS_SRC | XTCNTLSS_SRS | XTCNTLSS_SWC
+			    | XTCNTLSS_SWS);
+
+	/* Clear control register */
+	out_8(&iic->cntl, 0);
+	
+	/* Enable interrupts if possible */
+	iic_interrupt_mode(dev, dev->irq >= 0);
+
+	/* Set mode control */
+	out_8(&iic->mdcntl, MDCNTL_FMDB | MDCNTL_EINT | MDCNTL_EUBS
+			    | (dev->fast_mode ? MDCNTL_FSM : 0));
+
+	DUMP_REGS("iic_init", dev);
+}
+
+/* 
+ * Reset IIC interface
+ */
+static void iic_dev_reset(struct ibm_iic_private* dev)
+{
+	volatile struct iic_regs __iomem *iic = dev->vaddr;
+	int i;
+	u8 dc;
+	
+	DBG("%d: soft reset\n", dev->idx);
+	DUMP_REGS("reset", dev);
+	
+    	/* Place chip in the reset state */
+	out_8(&iic->xtcntlss, XTCNTLSS_SRST);
+	
+	/* Check if bus is free */
+	dc = in_8(&iic->directcntl);	
+	if (!DIRCTNL_FREE(dc)){
+		DBG("%d: trying to regain bus control\n", dev->idx);
+	
+		/* Try to set bus free state */
+		out_8(&iic->directcntl, DIRCNTL_SDAC | DIRCNTL_SCC);	
+	
+		/* Wait until we regain bus control */
+		for (i = 0; i < 100; ++i){
+			dc = in_8(&iic->directcntl);
+			if (DIRCTNL_FREE(dc))
+				break;
+			
+			/* Toggle SCL line */
+			dc ^= DIRCNTL_SCC;
+			out_8(&iic->directcntl, dc);
+			udelay(10);
+			dc ^= DIRCNTL_SCC;
+			out_8(&iic->directcntl, dc);
+			
+			/* be nice */
+			cond_resched();
+		}
+	}
+	
+	/* Remove reset */
+	out_8(&iic->xtcntlss, 0);
+	
+	/* Reinitialize interface */
+	iic_dev_init(dev);
+}
+
+/*
+ * Do 0-length transaction using bit-banging through IIC_DIRECTCNTL register.
+ */
+
+/* Wait for SCL and/or SDA to be high */
+static int iic_dc_wait(volatile struct iic_regs __iomem *iic, u8 mask)
+{
+	unsigned long x = jiffies + HZ / 28 + 2;
+	while ((in_8(&iic->directcntl) & mask) != mask){
+		if (unlikely(time_after(jiffies, x)))
+			return -1;
+		cond_resched();
+	}
+	return 0;
+}
+
+static int iic_smbus_quick(struct ibm_iic_private* dev, const struct i2c_msg* p)
+{
+	volatile struct iic_regs __iomem *iic = dev->vaddr;
+	const struct i2c_timings* t = &timings[dev->fast_mode ? 1 : 0];
+	u8 mask, v, sda;
+	int i, res;
+
+	/* Only 7-bit addresses are supported */
+	if (unlikely(p->flags & I2C_M_TEN)){
+		DBG("%d: smbus_quick - 10 bit addresses are not supported\n",
+			dev->idx);
+		return -EINVAL;
+	}
+
+	DBG("%d: smbus_quick(0x%02x)\n", dev->idx, p->addr);
+
+	/* Reset IIC interface */
+	out_8(&iic->xtcntlss, XTCNTLSS_SRST);
+
+	/* Wait for bus to become free */
+	out_8(&iic->directcntl, DIRCNTL_SDAC | DIRCNTL_SCC);
+	if (unlikely(iic_dc_wait(iic, DIRCNTL_MSDA | DIRCNTL_MSC)))
+		goto err;
+	ndelay(t->buf);
+
+	/* START */
+	out_8(&iic->directcntl, DIRCNTL_SCC);
+	sda = 0;
+	ndelay(t->hd_sta);
+
+	/* Send address */
+	v = (u8)((p->addr << 1) | ((p->flags & I2C_M_RD) ? 1 : 0));
+	for (i = 0, mask = 0x80; i < 8; ++i, mask >>= 1){
+		out_8(&iic->directcntl, sda);
+		ndelay(t->low / 2);
+		sda = (v & mask) ? DIRCNTL_SDAC : 0;
+		out_8(&iic->directcntl, sda);
+		ndelay(t->low / 2);
+
+		out_8(&iic->directcntl, DIRCNTL_SCC | sda);
+		if (unlikely(iic_dc_wait(iic, DIRCNTL_MSC)))
+			goto err;
+		ndelay(t->high);
+	}
+
+	/* ACK */
+	out_8(&iic->directcntl, sda);
+	ndelay(t->low / 2);
+	out_8(&iic->directcntl, DIRCNTL_SDAC);
+	ndelay(t->low / 2);
+	out_8(&iic->directcntl, DIRCNTL_SDAC | DIRCNTL_SCC);
+	if (unlikely(iic_dc_wait(iic, DIRCNTL_MSC)))
+		goto err;
+	res = (in_8(&iic->directcntl) & DIRCNTL_MSDA) ? -EREMOTEIO : 1;
+	ndelay(t->high);
+
+	/* STOP */
+	out_8(&iic->directcntl, 0);
+	ndelay(t->low);
+	out_8(&iic->directcntl, DIRCNTL_SCC);
+	if (unlikely(iic_dc_wait(iic, DIRCNTL_MSC)))
+		goto err;
+	ndelay(t->su_sto);
+	out_8(&iic->directcntl, DIRCNTL_SDAC | DIRCNTL_SCC);
+
+	ndelay(t->buf);
+
+	DBG("%d: smbus_quick -> %s\n", dev->idx, res ? "NACK" : "ACK");
+out:
+	/* Remove reset */
+	out_8(&iic->xtcntlss, 0);
+
+	/* Reinitialize interface */
+	iic_dev_init(dev);
+
+	return res;
+err:
+	DBG("%d: smbus_quick - bus is stuck\n", dev->idx);
+	res = -EREMOTEIO;
+	goto out;
+}
+
+/*
+ * IIC interrupt handler
+ */
+static irqreturn_t iic_handler(int irq, void *dev_id, struct pt_regs *regs)
+{
+	struct ibm_iic_private* dev = (struct ibm_iic_private*)dev_id;
+	volatile struct iic_regs __iomem *iic = dev->vaddr;
+	
+	DBG2("%d: irq handler, STS = 0x%02x, EXTSTS = 0x%02x\n", 
+	     dev->idx, in_8(&iic->sts), in_8(&iic->extsts));
+	
+	/* Acknowledge IRQ and wakeup iic_wait_for_tc */
+	out_8(&iic->sts, STS_IRQA | STS_SCMP);
+	wake_up_interruptible(&dev->wq);
+	
+	return IRQ_HANDLED;
+}
+
+/*
+ * Get master transfer result and clear errors if any.
+ * Returns the number of actually transferred bytes or error (<0)
+ */
+static int iic_xfer_result(struct ibm_iic_private* dev)
+{
+	volatile struct iic_regs __iomem *iic = dev->vaddr;	
+	
+	if (unlikely(in_8(&iic->sts) & STS_ERR)){
+		DBG("%d: xfer error, EXTSTS = 0x%02x\n", dev->idx, 
+			in_8(&iic->extsts));
+				
+		/* Clear errors and possible pending IRQs */
+		out_8(&iic->extsts, EXTSTS_IRQP | EXTSTS_IRQD | 
+			EXTSTS_LA | EXTSTS_ICT | EXTSTS_XFRA);
+			
+		/* Flush master data buffer */
+		out_8(&iic->mdcntl, in_8(&iic->mdcntl) | MDCNTL_FMDB);
+		
+		/* Is bus free?
+		 * If error happened during combined xfer
+		 * IIC interface is usually stuck in some strange
+		 * state, the only way out - soft reset.
+		 */
+		if ((in_8(&iic->extsts) & EXTSTS_BCS_MASK) != EXTSTS_BCS_FREE){
+			DBG("%d: bus is stuck, resetting\n", dev->idx);
+			iic_dev_reset(dev);
+		}
+		return -EREMOTEIO;
+	}
+	else
+		return in_8(&iic->xfrcnt) & XFRCNT_MTC_MASK;
+}
+
+/*
+ * Try to abort active transfer.
+ */
+static void iic_abort_xfer(struct ibm_iic_private* dev)
+{
+	volatile struct iic_regs __iomem *iic = dev->vaddr;
+	unsigned long x;
+	
+	DBG("%d: iic_abort_xfer\n", dev->idx);
+	
+	out_8(&iic->cntl, CNTL_HMT);
+	
+	/*
+	 * Wait for the abort command to complete.
+	 * It's not worth to be optimized, just poll (timeout >= 1 tick)
+	 */
+	x = jiffies + 2;
+	while ((in_8(&iic->extsts) & EXTSTS_BCS_MASK) != EXTSTS_BCS_FREE){
+		if (time_after(jiffies, x)){
+			DBG("%d: abort timeout, resetting...\n", dev->idx);
+			iic_dev_reset(dev);
+			return;
+		}
+		schedule();
+	}
+
+	/* Just to clear errors */
+	iic_xfer_result(dev);
+}
+
+/*
+ * Wait for master transfer to complete.
+ * It puts current process to sleep until we get interrupt or timeout expires.
+ * Returns the number of transferred bytes or error (<0)
+ */
+static int iic_wait_for_tc(struct ibm_iic_private* dev){
+	
+	volatile struct iic_regs __iomem *iic = dev->vaddr;
+	int ret = 0;
+	
+	if (dev->irq >= 0){
+		/* Interrupt mode */
+		ret = wait_event_interruptible_timeout(dev->wq, 
+			!(in_8(&iic->sts) & STS_PT), dev->adap.timeout * HZ);
+
+		if (unlikely(ret < 0))
+			DBG("%d: wait interrupted\n", dev->idx);
+		else if (unlikely(in_8(&iic->sts) & STS_PT)){
+			DBG("%d: wait timeout\n", dev->idx);
+			ret = -ETIMEDOUT;
+		}
+	}
+	else {
+		/* Polling mode */
+		unsigned long x = jiffies + dev->adap.timeout * HZ;
+		
+		while (in_8(&iic->sts) & STS_PT){
+			if (unlikely(time_after(jiffies, x))){
+				DBG("%d: poll timeout\n", dev->idx);
+				ret = -ETIMEDOUT;
+				break;
+			}
+		
+			if (unlikely(signal_pending(current))){
+				DBG("%d: poll interrupted\n", dev->idx);
+				ret = -ERESTARTSYS;
+				break;
+			}
+			schedule();
+		}	
+	}
+	
+	if (unlikely(ret < 0))
+		iic_abort_xfer(dev);
+	else
+		ret = iic_xfer_result(dev);
+	
+	DBG2("%d: iic_wait_for_tc -> %d\n", dev->idx, ret);
+	
+	return ret;
+}
+
+/*
+ * Low level master transfer routine
+ */
+static int iic_xfer_bytes(struct ibm_iic_private* dev, struct i2c_msg* pm, 
+			  int combined_xfer)
+{
+	volatile struct iic_regs __iomem *iic = dev->vaddr;
+	char* buf = pm->buf;
+	int i, j, loops, ret = 0;
+	int len = pm->len;
+
+	u8 cntl = (in_8(&iic->cntl) & CNTL_AMD) | CNTL_PT;
+	if (pm->flags & I2C_M_RD)
+		cntl |= CNTL_RW;
+	
+	loops = (len + 3) / 4;
+	for (i = 0; i < loops; ++i, len -= 4){
+		int count = len > 4 ? 4 : len;
+		u8 cmd = cntl | ((count - 1) << CNTL_TCT_SHIFT);
+		
+		if (!(cntl & CNTL_RW))
+			for (j = 0; j < count; ++j)
+				out_8((void __iomem *)&iic->mdbuf, *buf++);
+		
+		if (i < loops - 1)
+			cmd |= CNTL_CHT;
+		else if (combined_xfer)
+			cmd |= CNTL_RPST;
+		
+		DBG2("%d: xfer_bytes, %d, CNTL = 0x%02x\n", dev->idx, count, cmd);
+		
+		/* Start transfer */
+		out_8(&iic->cntl, cmd);
+		
+		/* Wait for completion */
+		ret = iic_wait_for_tc(dev);
+
+		if (unlikely(ret < 0))
+			break;
+		else if (unlikely(ret != count)){
+			DBG("%d: xfer_bytes, requested %d, transfered %d\n", 
+				dev->idx, count, ret);
+			
+			/* If it's not a last part of xfer, abort it */
+			if (combined_xfer || (i < loops - 1))
+    				iic_abort_xfer(dev);
+				
+			ret = -EREMOTEIO;
+			break;				
+		}
+		
+		if (cntl & CNTL_RW)
+			for (j = 0; j < count; ++j)
+				*buf++ = in_8((void __iomem *)&iic->mdbuf);
+	}
+	
+	return ret > 0 ? 0 : ret;
+}
+
+/*
+ * Set target slave address for master transfer
+ */
+static inline void iic_address(struct ibm_iic_private* dev, struct i2c_msg* msg)
+{
+	volatile struct iic_regs __iomem *iic = dev->vaddr;
+	u16 addr = msg->addr;
+	
+	DBG2("%d: iic_address, 0x%03x (%d-bit)\n", dev->idx, 
+		addr, msg->flags & I2C_M_TEN ? 10 : 7);
+	
+	if (msg->flags & I2C_M_TEN){
+	    out_8(&iic->cntl, CNTL_AMD);
+	    out_8(&iic->lmadr, addr);
+	    out_8(&iic->hmadr, 0xf0 | ((addr >> 7) & 0x06));
+	}
+	else {
+	    out_8(&iic->cntl, 0);
+	    out_8(&iic->lmadr, addr << 1);
+	}
+}
+
+static inline int iic_invalid_address(const struct i2c_msg* p)
+{
+	return (p->addr > 0x3ff) || (!(p->flags & I2C_M_TEN) && (p->addr > 0x7f));
+}
+
+static inline int iic_address_neq(const struct i2c_msg* p1, 
+				  const struct i2c_msg* p2)
+{
+	return (p1->addr != p2->addr) 
+		|| ((p1->flags & I2C_M_TEN) != (p2->flags & I2C_M_TEN));
+} 
+
+/*
+ * Generic master transfer entrypoint. 
+ * Returns the number of processed messages or error (<0)
+ */
+static int iic_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
+{
+    	struct ibm_iic_private* dev = (struct ibm_iic_private*)(i2c_get_adapdata(adap));
+	volatile struct iic_regs __iomem *iic = dev->vaddr;
+	int i, ret = 0;
+	
+	DBG2("%d: iic_xfer, %d msg(s)\n", dev->idx, num);
+	
+	if (!num)
+		return 0;
+	
+	/* Check the sanity of the passed messages.
+	 * Uhh, generic i2c layer is more suitable place for such code...
+	 */
+	if (unlikely(iic_invalid_address(&msgs[0]))){
+		DBG("%d: invalid address 0x%03x (%d-bit)\n", dev->idx, 
+			msgs[0].addr, msgs[0].flags & I2C_M_TEN ? 10 : 7);
+		return -EINVAL;
+	}		
+	for (i = 0; i < num; ++i){
+		if (unlikely(msgs[i].len <= 0)){
+			if (num == 1 && !msgs[0].len){
+				/* Special case for I2C_SMBUS_QUICK emulation.
+				 * IBM IIC doesn't support 0-length transactions
+				 * so we have to emulate them using bit-banging.
+				 */
+				return iic_smbus_quick(dev, &msgs[0]);
+			}
+			DBG("%d: invalid len %d in msg[%d]\n", dev->idx, 
+				msgs[i].len, i);
+			return -EINVAL;
+		}
+		if (unlikely(iic_address_neq(&msgs[0], &msgs[i]))){
+			DBG("%d: invalid addr in msg[%d]\n", dev->idx, i);
+			return -EINVAL;
+		}
+	}
+	
+	/* Check bus state */
+	if (unlikely((in_8(&iic->extsts) & EXTSTS_BCS_MASK) != EXTSTS_BCS_FREE)){
+		DBG("%d: iic_xfer, bus is not free\n", dev->idx);
+		
+		/* Usually it means something serious has happend.
+		 * We *cannot* have unfinished previous transfer
+		 * so it doesn't make any sense to try to stop it.
+		 * Probably we were not able to recover from the 
+		 * previous error.
+		 * The only *reasonable* thing I can think of here
+		 * is soft reset.  --ebs
+		 */
+		iic_dev_reset(dev);
+		
+		if ((in_8(&iic->extsts) & EXTSTS_BCS_MASK) != EXTSTS_BCS_FREE){
+			DBG("%d: iic_xfer, bus is still not free\n", dev->idx);
+			return -EREMOTEIO;
+		}
+	} 
+	else {
+		/* Flush master data buffer (just in case) */
+		out_8(&iic->mdcntl, in_8(&iic->mdcntl) | MDCNTL_FMDB);
+	}
+	
+	/* Load slave address */
+	iic_address(dev, &msgs[0]);
+	
+	/* Do real transfer */
+    	for (i = 0; i < num && !ret; ++i)
+		ret = iic_xfer_bytes(dev, &msgs[i], i < num - 1);
+
+	return ret < 0 ? ret : num;
+}
+
+static u32 iic_func(struct i2c_adapter *adap)
+{
+	return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL | I2C_FUNC_10BIT_ADDR;
+}
+
+static struct i2c_algorithm iic_algo = {
+	.name 		= "IBM IIC algorithm",
+	.id   		= I2C_ALGO_OCP,
+	.master_xfer 	= iic_xfer,
+	.functionality	= iic_func
+};
+
+/*
+ * Calculates IICx_CLCKDIV value for a specific OPB clock frequency
+ */
+static inline u8 iic_clckdiv(unsigned int opb)
+{
+	/* Compatibility kludge, should go away after all cards
+	 * are fixed to fill correct value for opbfreq.
+	 * Previous driver version used hardcoded divider value 4,
+	 * it corresponds to OPB frequency from the range (40, 50] MHz
+	 */
+	if (!opb){
+		printk(KERN_WARNING "ibm-iic: using compatibility value for OPB freq,"
+			" fix your board specific setup\n");
+		opb = 50000000;
+	}
+
+	/* Convert to MHz */
+	opb /= 1000000;
+	
+	if (opb < 20 || opb > 150){
+		printk(KERN_CRIT "ibm-iic: invalid OPB clock frequency %u MHz\n",
+			opb);
+		opb = opb < 20 ? 20 : 150;
+	}
+	return (u8)((opb + 9) / 10 - 1);
+}
+
+/*
+ * Register single IIC interface
+ */
+static int __devinit iic_probe(struct ocp_device *ocp){
+
+	struct ibm_iic_private* dev;
+	struct i2c_adapter* adap;
+	struct ocp_func_iic_data* iic_data = ocp->def->additions;
+	int ret;
+	
+	if (!iic_data)
+		printk(KERN_WARNING"ibm-iic%d: missing additional data!\n",
+			ocp->def->index);
+
+	if (!(dev = kmalloc(sizeof(*dev), GFP_KERNEL))){
+		printk(KERN_CRIT "ibm-iic%d: failed to allocate device data\n",
+			ocp->def->index);
+		return -ENOMEM;
+	}
+
+	memset(dev, 0, sizeof(*dev));
+	dev->idx = ocp->def->index;
+	ocp_set_drvdata(ocp, dev);
+	
+	if (!(dev->vaddr = ioremap(ocp->def->paddr, sizeof(struct iic_regs)))){
+		printk(KERN_CRIT "ibm-iic%d: failed to ioremap device registers\n",
+			dev->idx);
+		ret = -ENXIO;
+		goto fail2;
+	}
+	
+	init_waitqueue_head(&dev->wq);
+
+	dev->irq = iic_force_poll ? -1 : ocp->def->irq;
+	if (dev->irq >= 0){
+		/* Disable interrupts until we finish intialization,
+		   assumes level-sensitive IRQ setup...
+		 */
+		iic_interrupt_mode(dev, 0);
+		if (request_irq(dev->irq, iic_handler, 0, "IBM IIC", dev)){
+			printk(KERN_ERR "ibm-iic%d: request_irq %d failed\n", 
+				dev->idx, dev->irq);
+			/* Fallback to the polling mode */	
+			dev->irq = -1;
+		}
+	}
+	
+	if (dev->irq < 0)
+		printk(KERN_WARNING "ibm-iic%d: using polling mode\n", 
+			dev->idx);
+		
+	/* Board specific settings */
+	dev->fast_mode = iic_force_fast ? 1 : (iic_data ? iic_data->fast_mode : 0);
+	
+	/* clckdiv is the same for *all* IIC interfaces, 
+	 * but I'd rather make a copy than introduce another global. --ebs
+	 */
+	dev->clckdiv = iic_clckdiv(ocp_sys_info.opb_bus_freq);
+	DBG("%d: clckdiv = %d\n", dev->idx, dev->clckdiv);
+	
+	/* Initialize IIC interface */
+	iic_dev_init(dev);
+	
+	/* Register it with i2c layer */
+	adap = &dev->adap;
+	strcpy(adap->name, "IBM IIC");
+	i2c_set_adapdata(adap, dev);
+	adap->id = I2C_HW_OCP | iic_algo.id;
+	adap->algo = &iic_algo;
+	adap->client_register = NULL;
+	adap->client_unregister = NULL;
+	adap->timeout = 1;
+	adap->retries = 1;
+
+	if ((ret = i2c_add_adapter(adap)) != 0){
+		printk(KERN_CRIT "ibm-iic%d: failed to register i2c adapter\n",
+			dev->idx);
+		goto fail;
+	}
+	
+	printk(KERN_INFO "ibm-iic%d: using %s mode\n", dev->idx,
+		dev->fast_mode ? "fast (400 kHz)" : "standard (100 kHz)");
+
+	return 0;
+
+fail:	
+	if (dev->irq >= 0){
+		iic_interrupt_mode(dev, 0);
+		free_irq(dev->irq, dev);
+	}	
+
+	iounmap(dev->vaddr);
+fail2:	
+	ocp_set_drvdata(ocp, NULL);
+	kfree(dev);	
+	return ret;
+}
+
+/*
+ * Cleanup initialized IIC interface
+ */
+static void __devexit iic_remove(struct ocp_device *ocp)
+{
+	struct ibm_iic_private* dev = (struct ibm_iic_private*)ocp_get_drvdata(ocp);
+	BUG_ON(dev == NULL);
+	if (i2c_del_adapter(&dev->adap)){
+		printk(KERN_CRIT "ibm-iic%d: failed to delete i2c adapter :(\n",
+			dev->idx);
+		/* That's *very* bad, just shutdown IRQ ... */
+		if (dev->irq >= 0){
+		    iic_interrupt_mode(dev, 0);	
+		    free_irq(dev->irq, dev);
+		    dev->irq = -1;
+		}
+	} else {
+		if (dev->irq >= 0){
+		    iic_interrupt_mode(dev, 0);	
+		    free_irq(dev->irq, dev);
+		}
+		iounmap(dev->vaddr);
+		kfree(dev);
+	}
+}
+
+static struct ocp_device_id ibm_iic_ids[] __devinitdata = 
+{
+	{ .vendor = OCP_VENDOR_IBM, .function = OCP_FUNC_IIC },
+	{ .vendor = OCP_VENDOR_INVALID }
+};
+
+MODULE_DEVICE_TABLE(ocp, ibm_iic_ids);
+
+static struct ocp_driver ibm_iic_driver =
+{
+	.name 		= "iic",
+	.id_table	= ibm_iic_ids,
+	.probe		= iic_probe,
+	.remove		= __devexit_p(iic_remove),
+#if defined(CONFIG_PM)
+	.suspend	= NULL,
+	.resume		= NULL,
+#endif
+};
+
+static int __init iic_init(void)
+{
+	printk(KERN_INFO "IBM IIC driver v" DRIVER_VERSION "\n");
+	return ocp_register_driver(&ibm_iic_driver);
+}
+
+static void __exit iic_exit(void)
+{
+	ocp_unregister_driver(&ibm_iic_driver);
+}
+
+module_init(iic_init);
+module_exit(iic_exit);
diff --git a/drivers/i2c/busses/i2c-ibm_iic.h b/drivers/i2c/busses/i2c-ibm_iic.h
new file mode 100644
index 00000000000..d819a955d89
--- /dev/null
+++ b/drivers/i2c/busses/i2c-ibm_iic.h
@@ -0,0 +1,124 @@
+/*
+ * drivers/i2c/i2c-ibm_iic.h
+ *
+ * Support for the IIC peripheral on IBM PPC 4xx
+ * 
+ * Copyright (c) 2003 Zultys Technologies.
+ * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
+ *
+ * Based on original work by 
+ * 	Ian DaSilva  <idasilva@mvista.com>
+ *      Armin Kuster <akuster@mvista.com>
+ * 	Matt Porter  <mporter@mvista.com>
+ *
+ *      Copyright 2000-2003 MontaVista Software Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ */
+#ifndef __I2C_IBM_IIC_H_
+#define __I2C_IBM_IIC_H_
+
+#include <linux/config.h>
+#include <linux/i2c.h> 
+
+struct iic_regs {
+	u16 mdbuf;
+	u16 sbbuf;
+	u8 lmadr;
+	u8 hmadr;
+	u8 cntl;
+	u8 mdcntl;
+	u8 sts;
+	u8 extsts;
+	u8 lsadr;
+	u8 hsadr;
+	u8 clkdiv;
+	u8 intmsk;
+	u8 xfrcnt;
+	u8 xtcntlss;
+	u8 directcntl;
+};
+
+struct ibm_iic_private {
+	struct i2c_adapter adap;
+	volatile struct iic_regs __iomem *vaddr;
+	wait_queue_head_t wq;
+	int idx;
+	int irq;
+	int fast_mode;
+	u8  clckdiv;
+};
+
+/* IICx_CNTL register */
+#define CNTL_HMT	0x80
+#define CNTL_AMD	0x40
+#define CNTL_TCT_MASK	0x30
+#define CNTL_TCT_SHIFT	4
+#define CNTL_RPST	0x08
+#define CNTL_CHT	0x04 
+#define CNTL_RW		0x02
+#define CNTL_PT		0x01
+
+/* IICx_MDCNTL register */
+#define MDCNTL_FSDB	0x80
+#define MDCNTL_FMDB	0x40
+#define MDCNTL_EGC	0x20
+#define MDCNTL_FSM	0x10
+#define MDCNTL_ESM	0x08
+#define MDCNTL_EINT	0x04
+#define MDCNTL_EUBS	0x02
+#define MDCNTL_HSCL	0x01
+
+/* IICx_STS register */
+#define STS_SSS		0x80
+#define STS_SLPR	0x40
+#define STS_MDBS	0x20
+#define STS_MDBF	0x10
+#define STS_SCMP	0x08
+#define STS_ERR		0x04
+#define STS_IRQA	0x02
+#define STS_PT		0x01
+
+/* IICx_EXTSTS register */
+#define EXTSTS_IRQP	0x80
+#define EXTSTS_BCS_MASK	0x70
+#define   EXTSTS_BCS_FREE  0x40
+#define EXTSTS_IRQD	0x08
+#define EXTSTS_LA	0x04
+#define EXTSTS_ICT	0x02
+#define EXTSTS_XFRA	0x01
+
+/* IICx_INTRMSK register */
+#define INTRMSK_EIRC	0x80
+#define INTRMSK_EIRS	0x40
+#define INTRMSK_EIWC	0x20
+#define INTRMSK_EIWS	0x10
+#define INTRMSK_EIHE	0x08
+#define INTRMSK_EIIC	0x04
+#define INTRMSK_EITA	0x02
+#define INTRMSK_EIMTC	0x01
+
+/* IICx_XFRCNT register */
+#define XFRCNT_MTC_MASK	0x07
+
+/* IICx_XTCNTLSS register */
+#define XTCNTLSS_SRC	0x80
+#define XTCNTLSS_SRS	0x40
+#define XTCNTLSS_SWC	0x20
+#define XTCNTLSS_SWS	0x10
+#define XTCNTLSS_SRST	0x01
+
+/* IICx_DIRECTCNTL register */
+#define DIRCNTL_SDAC	0x08
+#define DIRCNTL_SCC	0x04
+#define DIRCNTL_MSDA	0x02
+#define DIRCNTL_MSC	0x01
+
+/* Check if we really control the I2C bus and bus is free */
+#define DIRCTNL_FREE(v)	(((v) & 0x0f) == 0x0f)
+
+#endif /* __I2C_IBM_IIC_H_ */
diff --git a/drivers/i2c/busses/i2c-iop3xx.c b/drivers/i2c/busses/i2c-iop3xx.c
new file mode 100644
index 00000000000..c961ba4cfb3
--- /dev/null
+++ b/drivers/i2c/busses/i2c-iop3xx.c
@@ -0,0 +1,554 @@
+/* ------------------------------------------------------------------------- */
+/* i2c-iop3xx.c i2c driver algorithms for Intel XScale IOP3xx & IXP46x       */
+/* ------------------------------------------------------------------------- */
+/* Copyright (C) 2003 Peter Milne, D-TACQ Solutions Ltd
+ *                    <Peter dot Milne at D hyphen TACQ dot com>
+ *
+ * With acknowledgements to i2c-algo-ibm_ocp.c by 
+ * Ian DaSilva, MontaVista Software, Inc. idasilva@mvista.com
+ *
+ * And i2c-algo-pcf.c, which was created by Simon G. Vogl and Hans Berglund:
+ *
+ * Copyright (C) 1995-1997 Simon G. Vogl, 1998-2000 Hans Berglund
+ *  
+ * And which acknowledged Kyösti Mälkki <kmalkki@cc.hut.fi>,
+ * Frodo Looijaard <frodol@dds.nl>, Martin Bailey<mbailey@littlefeet-inc.com>
+ *
+ * Major cleanup by Deepak Saxena <dsaxena@plexity.net>, 01/2005:
+ *
+ * - Use driver model to pass per-chip info instead of hardcoding and #ifdefs
+ * - Use ioremap/__raw_readl/__raw_writel instead of direct dereference
+ * - Make it work with IXP46x chips
+ * - Cleanup function names, coding style, etc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, version 2.
+ */
+
+#include <linux/config.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/device.h>
+#include <linux/i2c.h>
+
+#include <asm/io.h>
+
+#include "i2c-iop3xx.h"
+
+/* global unit counter */
+static int i2c_id = 0;
+
+static inline unsigned char 
+iic_cook_addr(struct i2c_msg *msg) 
+{
+	unsigned char addr;
+
+	addr = (msg->addr << 1);
+
+	if (msg->flags & I2C_M_RD)
+		addr |= 1;
+
+	/*
+	 * Read or Write?
+	 */
+	if (msg->flags & I2C_M_REV_DIR_ADDR)
+		addr ^= 1;
+
+	return addr;   
+}
+
+static void 
+iop3xx_i2c_reset(struct i2c_algo_iop3xx_data *iop3xx_adap)
+{
+	/* Follows devman 9.3 */
+	__raw_writel(IOP3XX_ICR_UNIT_RESET, iop3xx_adap->ioaddr + CR_OFFSET);
+	__raw_writel(IOP3XX_ISR_CLEARBITS, iop3xx_adap->ioaddr + SR_OFFSET);
+	__raw_writel(0, iop3xx_adap->ioaddr + CR_OFFSET);
+} 
+
+static void 
+iop3xx_i2c_set_slave_addr(struct i2c_algo_iop3xx_data *iop3xx_adap)
+{
+	__raw_writel(MYSAR, iop3xx_adap->ioaddr + SAR_OFFSET);
+}
+
+static void 
+iop3xx_i2c_enable(struct i2c_algo_iop3xx_data *iop3xx_adap)
+{
+	u32 cr = IOP3XX_ICR_GCD | IOP3XX_ICR_SCLEN | IOP3XX_ICR_UE;
+
+	/* 
+	 * Everytime unit enable is asserted, GPOD needs to be cleared
+	 * on IOP321 to avoid data corruption on the bus.
+	 */
+#ifdef CONFIG_ARCH_IOP321
+#define IOP321_GPOD_I2C0    0x00c0  /* clear these bits to enable ch0 */
+#define IOP321_GPOD_I2C1    0x0030  /* clear these bits to enable ch1 */
+
+	*IOP321_GPOD &= (iop3xx_adap->id == 0) ? ~IOP321_GPOD_I2C0 : 
+		~IOP321_GPOD_I2C1;
+#endif
+	/* NB SR bits not same position as CR IE bits :-( */
+	iop3xx_adap->SR_enabled = 
+		IOP3XX_ISR_ALD | IOP3XX_ISR_BERRD |
+		IOP3XX_ISR_RXFULL | IOP3XX_ISR_TXEMPTY;
+
+	cr |= IOP3XX_ICR_ALD_IE | IOP3XX_ICR_BERR_IE |
+		IOP3XX_ICR_RXFULL_IE | IOP3XX_ICR_TXEMPTY_IE;
+
+	__raw_writel(cr, iop3xx_adap->ioaddr + CR_OFFSET);
+}
+
+static void 
+iop3xx_i2c_transaction_cleanup(struct i2c_algo_iop3xx_data *iop3xx_adap)
+{
+	unsigned long cr = __raw_readl(iop3xx_adap->ioaddr + CR_OFFSET);
+	
+	cr &= ~(IOP3XX_ICR_MSTART | IOP3XX_ICR_TBYTE | 
+		IOP3XX_ICR_MSTOP | IOP3XX_ICR_SCLEN);
+
+	__raw_writel(cr, iop3xx_adap->ioaddr + CR_OFFSET);
+}
+
+/* 
+ * NB: the handler has to clear the source of the interrupt! 
+ * Then it passes the SR flags of interest to BH via adap data
+ */
+static irqreturn_t 
+iop3xx_i2c_irq_handler(int this_irq, void *dev_id, struct pt_regs *regs) 
+{
+	struct i2c_algo_iop3xx_data *iop3xx_adap = dev_id;
+	u32 sr = __raw_readl(iop3xx_adap->ioaddr + SR_OFFSET);
+
+	if ((sr &= iop3xx_adap->SR_enabled)) {
+		__raw_writel(sr, iop3xx_adap->ioaddr + SR_OFFSET);
+		iop3xx_adap->SR_received |= sr;
+		wake_up_interruptible(&iop3xx_adap->waitq);
+	}
+	return IRQ_HANDLED;
+}
+
+/* check all error conditions, clear them , report most important */
+static int 
+iop3xx_i2c_error(u32 sr)
+{
+	int rc = 0;
+
+	if ((sr & IOP3XX_ISR_BERRD)) {
+		if ( !rc ) rc = -I2C_ERR_BERR;
+	}
+	if ((sr & IOP3XX_ISR_ALD)) {
+		if ( !rc ) rc = -I2C_ERR_ALD;		
+	}
+	return rc;	
+}
+
+static inline u32 
+iop3xx_i2c_get_srstat(struct i2c_algo_iop3xx_data *iop3xx_adap)
+{
+	unsigned long flags;
+	u32 sr;
+
+	spin_lock_irqsave(&iop3xx_adap->lock, flags);
+	sr = iop3xx_adap->SR_received;
+	iop3xx_adap->SR_received = 0;
+	spin_unlock_irqrestore(&iop3xx_adap->lock, flags);
+
+	return sr;
+}
+
+/*
+ * sleep until interrupted, then recover and analyse the SR
+ * saved by handler
+ */
+typedef int (* compare_func)(unsigned test, unsigned mask);
+/* returns 1 on correct comparison */
+
+static int 
+iop3xx_i2c_wait_event(struct i2c_algo_iop3xx_data *iop3xx_adap, 
+			  unsigned flags, unsigned* status,
+			  compare_func compare)
+{
+	unsigned sr = 0;
+	int interrupted;
+	int done;
+	int rc = 0;
+
+	do {
+		interrupted = wait_event_interruptible_timeout (
+			iop3xx_adap->waitq,
+			(done = compare( sr = iop3xx_i2c_get_srstat(iop3xx_adap)					,flags )),
+			1 * HZ;
+			);
+		if ((rc = iop3xx_i2c_error(sr)) < 0) {
+			*status = sr;
+			return rc;
+		} else if (!interrupted) {
+			*status = sr;
+			return -ETIMEDOUT;
+		}
+	} while(!done);
+
+	*status = sr;
+
+	return 0;
+}
+
+/*
+ * Concrete compare_funcs 
+ */
+static int 
+all_bits_clear(unsigned test, unsigned mask)
+{
+	return (test & mask) == 0;
+}
+
+static int 
+any_bits_set(unsigned test, unsigned mask)
+{
+	return (test & mask) != 0;
+}
+
+static int 
+iop3xx_i2c_wait_tx_done(struct i2c_algo_iop3xx_data *iop3xx_adap, int *status)
+{
+	return iop3xx_i2c_wait_event( 
+		iop3xx_adap, 
+	        IOP3XX_ISR_TXEMPTY | IOP3XX_ISR_ALD | IOP3XX_ISR_BERRD,
+		status, any_bits_set);
+}
+
+static int 
+iop3xx_i2c_wait_rx_done(struct i2c_algo_iop3xx_data *iop3xx_adap, int *status)
+{
+	return iop3xx_i2c_wait_event( 
+		iop3xx_adap, 
+		IOP3XX_ISR_RXFULL | IOP3XX_ISR_ALD | IOP3XX_ISR_BERRD,
+		status,	any_bits_set);
+}
+
+static int 
+iop3xx_i2c_wait_idle(struct i2c_algo_iop3xx_data *iop3xx_adap, int *status)
+{
+	return iop3xx_i2c_wait_event( 
+		iop3xx_adap, IOP3XX_ISR_UNITBUSY, status, all_bits_clear);
+}
+
+static int 
+iop3xx_i2c_send_target_addr(struct i2c_algo_iop3xx_data *iop3xx_adap, 
+				struct i2c_msg* msg)
+{
+	unsigned long cr = __raw_readl(iop3xx_adap->ioaddr + CR_OFFSET);
+	int status;
+	int rc;
+
+	__raw_writel(iic_cook_addr(msg), iop3xx_adap->ioaddr + DBR_OFFSET);
+	
+	cr &= ~(IOP3XX_ICR_MSTOP | IOP3XX_ICR_NACK);
+	cr |= IOP3XX_ICR_MSTART | IOP3XX_ICR_TBYTE;
+
+	__raw_writel(cr, iop3xx_adap->ioaddr + CR_OFFSET);
+	rc = iop3xx_i2c_wait_tx_done(iop3xx_adap, &status);
+
+	return rc;
+}
+
+static int 
+iop3xx_i2c_write_byte(struct i2c_algo_iop3xx_data *iop3xx_adap, char byte, 
+				int stop)
+{
+	unsigned long cr = __raw_readl(iop3xx_adap->ioaddr + CR_OFFSET);
+	int status;
+	int rc = 0;
+
+	__raw_writel(byte, iop3xx_adap->ioaddr + DBR_OFFSET);
+	cr &= ~IOP3XX_ICR_MSTART;
+	if (stop) {
+		cr |= IOP3XX_ICR_MSTOP;
+	} else {
+		cr &= ~IOP3XX_ICR_MSTOP;
+	}
+	cr |= IOP3XX_ICR_TBYTE;
+	__raw_writel(cr, iop3xx_adap->ioaddr + CR_OFFSET);
+	rc = iop3xx_i2c_wait_tx_done(iop3xx_adap, &status);
+
+	return rc;
+} 
+
+static int 
+iop3xx_i2c_read_byte(struct i2c_algo_iop3xx_data *iop3xx_adap, char* byte, 
+				int stop)
+{
+	unsigned long cr = __raw_readl(iop3xx_adap->ioaddr + CR_OFFSET);
+	int status;
+	int rc = 0;
+
+	cr &= ~IOP3XX_ICR_MSTART;
+
+	if (stop) {
+		cr |= IOP3XX_ICR_MSTOP | IOP3XX_ICR_NACK;
+	} else {
+		cr &= ~(IOP3XX_ICR_MSTOP | IOP3XX_ICR_NACK);
+	}
+	cr |= IOP3XX_ICR_TBYTE;
+	__raw_writel(cr, iop3xx_adap->ioaddr + CR_OFFSET);
+
+	rc = iop3xx_i2c_wait_rx_done(iop3xx_adap, &status);
+
+	*byte = __raw_readl(iop3xx_adap->ioaddr + DBR_OFFSET);
+
+	return rc;
+}
+
+static int 
+iop3xx_i2c_writebytes(struct i2c_adapter *i2c_adap, const char *buf, int count)
+{
+	struct i2c_algo_iop3xx_data *iop3xx_adap = i2c_adap->algo_data;
+	int ii;
+	int rc = 0;
+
+	for (ii = 0; rc == 0 && ii != count; ++ii) 
+		rc = iop3xx_i2c_write_byte(iop3xx_adap, buf[ii], ii==count-1);
+	return rc;
+}
+
+static int 
+iop3xx_i2c_readbytes(struct i2c_adapter *i2c_adap, char *buf, int count)
+{
+	struct i2c_algo_iop3xx_data *iop3xx_adap = i2c_adap->algo_data;
+	int ii;
+	int rc = 0;
+
+	for (ii = 0; rc == 0 && ii != count; ++ii)
+		rc = iop3xx_i2c_read_byte(iop3xx_adap, &buf[ii], ii==count-1);
+	
+	return rc;
+}
+
+/*
+ * Description:  This function implements combined transactions.  Combined
+ * transactions consist of combinations of reading and writing blocks of data.
+ * FROM THE SAME ADDRESS
+ * Each transfer (i.e. a read or a write) is separated by a repeated start
+ * condition.
+ */
+static int 
+iop3xx_i2c_handle_msg(struct i2c_adapter *i2c_adap, struct i2c_msg* pmsg) 
+{
+	struct i2c_algo_iop3xx_data *iop3xx_adap = i2c_adap->algo_data;
+	int rc;
+
+	rc = iop3xx_i2c_send_target_addr(iop3xx_adap, pmsg);
+	if (rc < 0) {
+		return rc;
+	}
+
+	if ((pmsg->flags&I2C_M_RD)) {
+		return iop3xx_i2c_readbytes(i2c_adap, pmsg->buf, pmsg->len);
+	} else {
+		return iop3xx_i2c_writebytes(i2c_adap, pmsg->buf, pmsg->len);
+	}
+}
+
+/*
+ * master_xfer() - main read/write entry
+ */
+static int 
+iop3xx_i2c_master_xfer(struct i2c_adapter *i2c_adap, struct i2c_msg *msgs, 
+				int num)
+{
+	struct i2c_algo_iop3xx_data *iop3xx_adap = i2c_adap->algo_data;
+	int im = 0;
+	int ret = 0;
+	int status;
+
+	iop3xx_i2c_wait_idle(iop3xx_adap, &status);
+	iop3xx_i2c_reset(iop3xx_adap);
+	iop3xx_i2c_enable(iop3xx_adap);
+
+	for (im = 0; ret == 0 && im != num; im++) {
+		ret = iop3xx_i2c_handle_msg(i2c_adap, &msgs[im]);
+	}
+
+	iop3xx_i2c_transaction_cleanup(iop3xx_adap);
+	
+	if(ret)
+		return ret;
+
+	return im;   
+}
+
+static int 
+iop3xx_i2c_algo_control(struct i2c_adapter *adapter, unsigned int cmd,
+			unsigned long arg)
+{
+	return 0;
+}
+
+static u32 
+iop3xx_i2c_func(struct i2c_adapter *adap)
+{
+	return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
+}
+
+static struct i2c_algorithm iop3xx_i2c_algo = {
+	.name		= "IOP3xx I2C algorithm",
+	.id		= I2C_ALGO_IOP3XX,
+	.master_xfer	= iop3xx_i2c_master_xfer,
+	.algo_control	= iop3xx_i2c_algo_control,
+	.functionality	= iop3xx_i2c_func,
+};
+
+static int 
+iop3xx_i2c_remove(struct device *device)
+{
+	struct platform_device *pdev = to_platform_device(device);
+	struct i2c_adapter *padapter = dev_get_drvdata(&pdev->dev);
+	struct i2c_algo_iop3xx_data *adapter_data = 
+		(struct i2c_algo_iop3xx_data *)padapter->algo_data;
+	struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	unsigned long cr = __raw_readl(adapter_data->ioaddr + CR_OFFSET);
+
+	/*
+	 * Disable the actual HW unit
+	 */
+	cr &= ~(IOP3XX_ICR_ALD_IE | IOP3XX_ICR_BERR_IE |
+		IOP3XX_ICR_RXFULL_IE | IOP3XX_ICR_TXEMPTY_IE);
+	__raw_writel(cr, adapter_data->ioaddr + CR_OFFSET);
+
+	iounmap((void __iomem*)adapter_data->ioaddr);
+	release_mem_region(res->start, IOP3XX_I2C_IO_SIZE);
+	kfree(adapter_data);
+	kfree(padapter);
+
+	dev_set_drvdata(&pdev->dev, NULL);
+
+	return 0;
+}
+
+static int 
+iop3xx_i2c_probe(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct resource *res;
+	int ret;
+	struct i2c_adapter *new_adapter;
+	struct i2c_algo_iop3xx_data *adapter_data;
+
+	new_adapter = kmalloc(sizeof(struct i2c_adapter), GFP_KERNEL);
+	if (!new_adapter) {
+		ret = -ENOMEM;
+		goto out;
+	}
+	memset((void*)new_adapter, 0, sizeof(*new_adapter));
+
+	adapter_data = kmalloc(sizeof(struct i2c_algo_iop3xx_data), GFP_KERNEL);
+	if (!adapter_data) {
+		ret = -ENOMEM;
+		goto free_adapter;
+	}
+	memset((void*)adapter_data, 0, sizeof(*adapter_data));
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		ret = -ENODEV;
+		goto free_both;
+	}
+
+	if (!request_mem_region(res->start, IOP3XX_I2C_IO_SIZE, pdev->name)) {
+		ret = -EBUSY;
+		goto free_both;
+	}
+
+	/* set the adapter enumeration # */
+	adapter_data->id = i2c_id++;
+
+	adapter_data->ioaddr = (u32)ioremap(res->start, IOP3XX_I2C_IO_SIZE);
+	if (!adapter_data->ioaddr) {
+		ret = -ENOMEM;
+		goto release_region;
+	}
+
+	res = request_irq(platform_get_irq(pdev, 0), iop3xx_i2c_irq_handler, 0, 
+				pdev->name, adapter_data);
+	if (res) {
+		ret = -EIO;
+		goto unmap;
+	}
+
+	memcpy(new_adapter->name, pdev->name, strlen(pdev->name));
+	new_adapter->id = I2C_HW_IOP3XX;
+	new_adapter->owner = THIS_MODULE;
+	new_adapter->dev.parent = &pdev->dev;
+
+	/*
+	 * Default values...should these come in from board code?
+	 */
+	new_adapter->timeout = 100;	
+	new_adapter->retries = 3;
+	new_adapter->algo = &iop3xx_i2c_algo;
+
+	init_waitqueue_head(&adapter_data->waitq);
+	spin_lock_init(&adapter_data->lock);
+
+	iop3xx_i2c_reset(adapter_data);
+	iop3xx_i2c_set_slave_addr(adapter_data);
+	iop3xx_i2c_enable(adapter_data);
+
+	dev_set_drvdata(&pdev->dev, new_adapter);
+	new_adapter->algo_data = adapter_data;
+
+	i2c_add_adapter(new_adapter);
+
+	return 0;
+
+unmap:
+	iounmap((void __iomem*)adapter_data->ioaddr);
+
+release_region:
+	release_mem_region(res->start, IOP3XX_I2C_IO_SIZE);
+
+free_both:
+	kfree(adapter_data);
+
+free_adapter:
+	kfree(new_adapter);
+
+out:
+	return ret;
+}
+
+
+static struct device_driver iop3xx_i2c_driver = {
+	.name		= "IOP3xx-I2C",
+	.bus		= &platform_bus_type,
+	.probe		= iop3xx_i2c_probe,
+	.remove		= iop3xx_i2c_remove
+};
+
+static int __init 
+i2c_iop3xx_init (void)
+{
+	return driver_register(&iop3xx_i2c_driver);
+}
+
+static void __exit 
+i2c_iop3xx_exit (void)
+{
+	driver_unregister(&iop3xx_i2c_driver);
+	return;
+}
+
+module_init (i2c_iop3xx_init);
+module_exit (i2c_iop3xx_exit);
+
+MODULE_AUTHOR("D-TACQ Solutions Ltd <www.d-tacq.com>");
+MODULE_DESCRIPTION("IOP3xx iic algorithm and driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/i2c/busses/i2c-iop3xx.h b/drivers/i2c/busses/i2c-iop3xx.h
new file mode 100644
index 00000000000..e46ebaea7b1
--- /dev/null
+++ b/drivers/i2c/busses/i2c-iop3xx.h
@@ -0,0 +1,107 @@
+/* ------------------------------------------------------------------------- */
+/* i2c-iop3xx.h algorithm driver definitions private to i2c-iop3xx.c         */
+/* ------------------------------------------------------------------------- */
+/*   Copyright (C) 2003 Peter Milne, D-TACQ Solutions Ltd
+ *                      <Peter dot Milne at D hyphen TACQ dot com>
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation, version 2.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.                */
+/* ------------------------------------------------------------------------- */
+
+
+#ifndef I2C_IOP3XX_H
+#define I2C_IOP3XX_H 1
+
+/*
+ * iop321 hardware bit definitions
+ */
+#define IOP3XX_ICR_FAST_MODE	0x8000	/* 1=400kBps, 0=100kBps */
+#define IOP3XX_ICR_UNIT_RESET	0x4000	/* 1=RESET */
+#define IOP3XX_ICR_SAD_IE	0x2000	/* 1=Slave Detect Interrupt Enable */
+#define IOP3XX_ICR_ALD_IE	0x1000	/* 1=Arb Loss Detect Interrupt Enable */
+#define IOP3XX_ICR_SSD_IE	0x0800	/* 1=Slave STOP Detect Interrupt Enable */
+#define IOP3XX_ICR_BERR_IE	0x0400	/* 1=Bus Error Interrupt Enable */
+#define IOP3XX_ICR_RXFULL_IE	0x0200	/* 1=Receive Full Interrupt Enable */
+#define IOP3XX_ICR_TXEMPTY_IE	0x0100	/* 1=Transmit Empty Interrupt Enable */
+#define IOP3XX_ICR_GCD		0x0080	/* 1=General Call Disable */
+/*
+ * IOP3XX_ICR_GCD: 1 disables response as slave. "This bit must be set
+ * when sending a master mode general call message from the I2C unit"
+ */
+#define IOP3XX_ICR_UE		0x0040	/* 1=Unit Enable */
+/*
+ * "NOTE: To avoid I2C bus integrity problems, 
+ * the user needs to ensure that the GPIO Output Data Register - 
+ * GPOD bits associated with an I2C port are cleared prior to setting 
+ * the enable bit for that I2C serial port. 
+ * The user prepares to enable I2C port 0 and 
+ * I2C port 1 by clearing GPOD bits 7:6 and GPOD bits 5:4, respectively.
+ */
+#define IOP3XX_ICR_SCLEN	0x0020	/* 1=SCL enable for master mode */
+#define IOP3XX_ICR_MABORT	0x0010	/* 1=Send a STOP with no data 
+					 * NB TBYTE must be clear */
+#define IOP3XX_ICR_TBYTE	0x0008	/* 1=Send/Receive a byte. i2c clears */
+#define IOP3XX_ICR_NACK		0x0004	/* 1=reply with NACK */
+#define IOP3XX_ICR_MSTOP	0x0002	/* 1=send a STOP after next data byte */
+#define IOP3XX_ICR_MSTART	0x0001	/* 1=initiate a START */
+
+
+#define IOP3XX_ISR_BERRD	0x0400	/* 1=BUS ERROR Detected */
+#define IOP3XX_ISR_SAD		0x0200	/* 1=Slave ADdress Detected */
+#define IOP3XX_ISR_GCAD		0x0100	/* 1=General Call Address Detected */
+#define IOP3XX_ISR_RXFULL	0x0080	/* 1=Receive Full */
+#define IOP3XX_ISR_TXEMPTY	0x0040	/* 1=Transmit Empty */
+#define IOP3XX_ISR_ALD		0x0020	/* 1=Arbitration Loss Detected */
+#define IOP3XX_ISR_SSD		0x0010	/* 1=Slave STOP Detected */
+#define IOP3XX_ISR_BBUSY	0x0008	/* 1=Bus BUSY */
+#define IOP3XX_ISR_UNITBUSY	0x0004	/* 1=Unit Busy */
+#define IOP3XX_ISR_NACK		0x0002	/* 1=Unit Rx or Tx a NACK */
+#define IOP3XX_ISR_RXREAD	0x0001	/* 1=READ 0=WRITE (R/W bit of slave addr */
+
+#define IOP3XX_ISR_CLEARBITS	0x07f0
+
+#define IOP3XX_ISAR_SAMASK	0x007f
+
+#define IOP3XX_IDBR_MASK	0x00ff
+
+#define IOP3XX_IBMR_SCL		0x0002
+#define IOP3XX_IBMR_SDA		0x0001
+
+#define IOP3XX_GPOD_I2C0	0x00c0	/* clear these bits to enable ch0 */
+#define IOP3XX_GPOD_I2C1	0x0030	/* clear these bits to enable ch1 */
+
+#define MYSAR			0x02	/* SWAG a suitable slave address */
+
+#define I2C_ERR			321
+#define I2C_ERR_BERR		(I2C_ERR+0)
+#define I2C_ERR_ALD		(I2C_ERR+1)
+
+
+#define	CR_OFFSET		0
+#define	SR_OFFSET		0x4
+#define	SAR_OFFSET		0x8
+#define	DBR_OFFSET		0xc
+#define	CCR_OFFSET		0x10
+#define	BMR_OFFSET		0x14
+
+#define	IOP3XX_I2C_IO_SIZE	0x18
+
+struct i2c_algo_iop3xx_data {
+	u32 ioaddr;
+	wait_queue_head_t waitq;
+	spinlock_t lock;
+	u32 SR_enabled, SR_received;
+	int id;
+};
+
+#endif /* I2C_IOP3XX_H */
diff --git a/drivers/i2c/busses/i2c-isa.c b/drivers/i2c/busses/i2c-isa.c
new file mode 100644
index 00000000000..0f54a2a0afa
--- /dev/null
+++ b/drivers/i2c/busses/i2c-isa.c
@@ -0,0 +1,72 @@
+/*
+    i2c-isa.c - Part of lm_sensors, Linux kernel modules for hardware
+            monitoring
+    Copyright (c) 1998, 1999  Frodo Looijaard <frodol@dds.nl> 
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+/* This implements an i2c algorithm/adapter for ISA bus. Not that this is
+   on first sight very useful; almost no functionality is preserved.
+   Except that it makes writing drivers for chips which can be on both
+   the SMBus and the ISA bus very much easier. See lm78.c for an example
+   of this. */
+
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/i2c.h>
+
+static u32 isa_func(struct i2c_adapter *adapter);
+
+/* This is the actual algorithm we define */
+static struct i2c_algorithm isa_algorithm = {
+	.name		= "ISA bus algorithm",
+	.id		= I2C_ALGO_ISA,
+	.functionality	= isa_func,
+};
+
+/* There can only be one... */
+static struct i2c_adapter isa_adapter = {
+	.owner		= THIS_MODULE,
+	.class          = I2C_CLASS_HWMON,
+	.algo		= &isa_algorithm,
+	.name		= "ISA main adapter",
+};
+
+/* We can't do a thing... */
+static u32 isa_func(struct i2c_adapter *adapter)
+{
+	return 0;
+}
+
+static int __init i2c_isa_init(void)
+{
+	return i2c_add_adapter(&isa_adapter);
+}
+
+static void __exit i2c_isa_exit(void)
+{
+	i2c_del_adapter(&isa_adapter);
+}
+
+MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl>");
+MODULE_DESCRIPTION("ISA bus access through i2c");
+MODULE_LICENSE("GPL");
+
+module_init(i2c_isa_init);
+module_exit(i2c_isa_exit);
diff --git a/drivers/i2c/busses/i2c-ite.c b/drivers/i2c/busses/i2c-ite.c
new file mode 100644
index 00000000000..702e3def1b8
--- /dev/null
+++ b/drivers/i2c/busses/i2c-ite.c
@@ -0,0 +1,282 @@
+/*
+   -------------------------------------------------------------------------
+   i2c-adap-ite.c i2c-hw access for the IIC peripheral on the ITE MIPS system
+   -------------------------------------------------------------------------
+   Hai-Pao Fan, MontaVista Software, Inc.
+   hpfan@mvista.com or source@mvista.com
+
+   Copyright 2001 MontaVista Software Inc.
+
+   ----------------------------------------------------------------------------
+   This file was highly leveraged from i2c-elektor.c, which was created
+   by Simon G. Vogl and Hans Berglund:
+
+ 
+     Copyright (C) 1995-97 Simon G. Vogl
+                   1998-99 Hans Berglund
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.		     */
+/* ------------------------------------------------------------------------- */
+
+/* With some changes from Kyösti Mälkki <kmalkki@cc.hut.fi> and even
+   Frodo Looijaard <frodol@dds.nl> */
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/ioport.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/wait.h>
+#include <asm/irq.h>
+#include <asm/io.h>
+
+#include <linux/i2c.h>
+#include <linux/i2c-algo-ite.h>
+#include <linux/i2c-adap-ite.h>
+#include "../i2c-ite.h"
+
+#define DEFAULT_BASE  0x14014030
+#define ITE_IIC_IO_SIZE	0x40
+#define DEFAULT_IRQ   0
+#define DEFAULT_CLOCK 0x1b0e	/* default 16MHz/(27+14) = 400KHz */
+#define DEFAULT_OWN   0x55
+
+static int base;
+static int irq;
+static int clock;
+static int own;
+
+static struct iic_ite gpi;
+static wait_queue_head_t iic_wait;
+static int iic_pending;
+static spinlock_t lock;
+
+/* ----- local functions ----------------------------------------------	*/
+
+static void iic_ite_setiic(void *data, int ctl, short val)
+{
+        unsigned long j = jiffies + 10;
+
+	pr_debug(" Write 0x%02x to 0x%x\n",(unsigned short)val, ctl&0xff);
+#ifdef DEBUG
+	while (time_before(jiffies, j))
+		schedule();
+#endif
+	outw(val,ctl);
+}
+
+static short iic_ite_getiic(void *data, int ctl)
+{
+	short val;
+
+	val = inw(ctl);
+	pr_debug("Read 0x%02x from 0x%x\n",(unsigned short)val, ctl&0xff);
+	return (val);
+}
+
+/* Return our slave address.  This is the address
+ * put on the I2C bus when another master on the bus wants to address us
+ * as a slave
+ */
+static int iic_ite_getown(void *data)
+{
+	return (gpi.iic_own);
+}
+
+
+static int iic_ite_getclock(void *data)
+{
+	return (gpi.iic_clock);
+}
+
+
+/* Put this process to sleep.  We will wake up when the
+ * IIC controller interrupts.
+ */
+static void iic_ite_waitforpin(void) {
+   DEFINE_WAIT(wait);
+   int timeout = 2;
+   long flags;
+
+   /* If interrupts are enabled (which they are), then put the process to
+    * sleep.  This process will be awakened by two events -- either the
+    * the IIC peripheral interrupts or the timeout expires. 
+    * If interrupts are not enabled then delay for a reasonable amount 
+    * of time and return.
+    */
+   if (gpi.iic_irq > 0) {
+	spin_lock_irqsave(&lock, flags);
+	if (iic_pending == 0) {
+		spin_unlock_irqrestore(&lock, flags);
+		prepare_to_wait(&iic_wait, &wait, TASK_INTERRUPTIBLE);
+		if (schedule_timeout(timeout*HZ)) {
+			spin_lock_irqsave(&lock, flags);
+			if (iic_pending == 1) {
+				iic_pending = 0;
+			}
+			spin_unlock_irqrestore(&lock, flags);
+		}
+		finish_wait(&iic_wait, &wait);
+	} else {
+		iic_pending = 0;
+		spin_unlock_irqrestore(&lock, flags);
+	}
+   } else {
+      udelay(100);
+   }
+}
+
+
+static irqreturn_t iic_ite_handler(int this_irq, void *dev_id,
+							struct pt_regs *regs)
+{
+	spin_lock(&lock);
+	iic_pending = 1;
+	spin_unlock(&lock);
+
+	wake_up_interruptible(&iic_wait);
+
+	return IRQ_HANDLED;
+}
+
+
+/* Lock the region of memory where I/O registers exist.  Request our
+ * interrupt line and register its associated handler.
+ */
+static int iic_hw_resrc_init(void)
+{
+	if (!request_region(gpi.iic_base, ITE_IIC_IO_SIZE, "i2c"))
+		return -ENODEV;
+  
+	if (gpi.iic_irq <= 0)
+		return 0;
+
+	if (request_irq(gpi.iic_irq, iic_ite_handler, 0, "ITE IIC", 0) < 0)
+		gpi.iic_irq = 0;
+	else
+		enable_irq(gpi.iic_irq);
+
+	return 0;
+}
+
+
+static void iic_ite_release(void)
+{
+	if (gpi.iic_irq > 0) {
+		disable_irq(gpi.iic_irq);
+		free_irq(gpi.iic_irq, 0);
+	}
+	release_region(gpi.iic_base , 2);
+}
+
+/* ------------------------------------------------------------------------
+ * Encapsulate the above functions in the correct operations structure.
+ * This is only done when more than one hardware adapter is supported.
+ */
+static struct i2c_algo_iic_data iic_ite_data = {
+	NULL,
+	iic_ite_setiic,
+	iic_ite_getiic,
+	iic_ite_getown,
+	iic_ite_getclock,
+	iic_ite_waitforpin,
+	80, 80, 100,		/*	waits, timeout */
+};
+
+static struct i2c_adapter iic_ite_ops = {
+	.owner		= THIS_MODULE,
+	.id		= I2C_HW_I_IIC,
+	.algo_data	= &iic_ite_data,
+	.dev		= {
+		.name	= "ITE IIC adapter",
+	},
+};
+
+/* Called when the module is loaded.  This function starts the
+ * cascade of calls up through the hierarchy of i2c modules (i.e. up to the
+ *  algorithm layer and into to the core layer)
+ */
+static int __init iic_ite_init(void) 
+{
+
+	struct iic_ite *piic = &gpi;
+
+	printk(KERN_INFO "Initialize ITE IIC adapter module\n");
+	if (base == 0)
+		piic->iic_base = DEFAULT_BASE;
+	else
+		piic->iic_base = base;
+
+	if (irq == 0)
+		piic->iic_irq = DEFAULT_IRQ;
+	else
+		piic->iic_irq = irq;
+
+	if (clock == 0)
+		piic->iic_clock = DEFAULT_CLOCK;
+	else
+		piic->iic_clock = clock;
+
+	if (own == 0)
+		piic->iic_own = DEFAULT_OWN;
+	else
+		piic->iic_own = own;
+
+	iic_ite_data.data = (void *)piic;
+	init_waitqueue_head(&iic_wait);
+	spin_lock_init(&lock);
+	if (iic_hw_resrc_init() == 0) {
+		if (i2c_iic_add_bus(&iic_ite_ops) < 0)
+			return -ENODEV;
+	} else {
+		return -ENODEV;
+	}
+	printk(KERN_INFO " found device at %#x irq %d.\n", 
+		piic->iic_base, piic->iic_irq);
+	return 0;
+}
+
+
+static void iic_ite_exit(void)
+{
+	i2c_iic_del_bus(&iic_ite_ops);
+        iic_ite_release();
+}
+
+/* If modules is NOT defined when this file is compiled, then the MODULE_*
+ * macros will resolve to nothing
+ */
+MODULE_AUTHOR("MontaVista Software <www.mvista.com>");
+MODULE_DESCRIPTION("I2C-Bus adapter routines for ITE IIC bus adapter");
+MODULE_LICENSE("GPL");
+
+module_param(base, int, 0);
+module_param(irq, int, 0);
+module_param(clock, int, 0);
+module_param(own, int, 0);
+
+
+/* Called when module is loaded or when kernel is initialized.
+ * If MODULES is defined when this file is compiled, then this function will
+ * resolve to init_module (the function called when insmod is invoked for a
+ * module).  Otherwise, this function is called early in the boot, when the
+ * kernel is intialized.  Check out /include/init.h to see how this works.
+ */
+module_init(iic_ite_init);
+
+/* Resolves to module_cleanup when MODULES is defined. */
+module_exit(iic_ite_exit); 
diff --git a/drivers/i2c/busses/i2c-ixp2000.c b/drivers/i2c/busses/i2c-ixp2000.c
new file mode 100644
index 00000000000..21cd54d0230
--- /dev/null
+++ b/drivers/i2c/busses/i2c-ixp2000.c
@@ -0,0 +1,171 @@
+/*
+ * drivers/i2c/busses/i2c-ixp2000.c
+ *
+ * I2C adapter for IXP2000 systems using GPIOs for I2C bus
+ *
+ * Author: Deepak Saxena <dsaxena@plexity.net>
+ * Based on IXDP2400 code by: Naeem M. Afzal <naeem.m.afzal@intel.com>
+ * Made generic by: Jeff Daly <jeffrey.daly@intel.com>
+ *
+ * Copyright (c) 2003-2004 MontaVista Software Inc.
+ *
+ * This file is licensed under  the terms of the GNU General Public 
+ * License version 2. This program is licensed "as is" without any 
+ * warranty of any kind, whether express or implied.
+ *
+ * From Jeff Daly:
+ *
+ * I2C adapter driver for Intel IXDP2xxx platforms. This should work for any
+ * IXP2000 platform if it uses the HW GPIO in the same manner.  Basically, 
+ * SDA and SCL GPIOs have external pullups.  Setting the respective GPIO to 
+ * an input will make the signal a '1' via the pullup.  Setting them to 
+ * outputs will pull them down. 
+ *
+ * The GPIOs are open drain signals and are used as configuration strap inputs
+ * during power-up so there's generally a buffer on the board that needs to be 
+ * 'enabled' to drive the GPIOs.
+ */
+
+#include <linux/config.h>
+#ifdef CONFIG_I2C_DEBUG_BUS
+#define DEBUG	1
+#endif
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/i2c-algo-bit.h>
+
+#include <asm/hardware.h>	/* Pick up IXP42000-specific bits */
+
+static inline int ixp2000_scl_pin(void *data)
+{
+	return ((struct ixp2000_i2c_pins*)data)->scl_pin;
+}
+
+static inline int ixp2000_sda_pin(void *data)
+{
+	return ((struct ixp2000_i2c_pins*)data)->sda_pin;
+}
+
+
+static void ixp2000_bit_setscl(void *data, int val)
+{
+	int i = 5000;
+
+	if (val) {
+		gpio_line_config(ixp2000_scl_pin(data), GPIO_IN);
+		while(!gpio_line_get(ixp2000_scl_pin(data)) && i--);
+	} else {
+		gpio_line_config(ixp2000_scl_pin(data), GPIO_OUT);
+	}
+}
+
+static void ixp2000_bit_setsda(void *data, int val)
+{
+	if (val) {
+		gpio_line_config(ixp2000_sda_pin(data), GPIO_IN);
+	} else {
+		gpio_line_config(ixp2000_sda_pin(data), GPIO_OUT);
+	}
+}
+
+static int ixp2000_bit_getscl(void *data)
+{
+	return gpio_line_get(ixp2000_scl_pin(data));
+}
+
+static int ixp2000_bit_getsda(void *data)
+{
+	return gpio_line_get(ixp2000_sda_pin(data));
+}
+
+struct ixp2000_i2c_data {
+	struct ixp2000_i2c_pins *gpio_pins;
+	struct i2c_adapter adapter;
+	struct i2c_algo_bit_data algo_data;
+};
+
+static int ixp2000_i2c_remove(struct device *dev)
+{
+	struct platform_device *plat_dev = to_platform_device(dev);
+	struct ixp2000_i2c_data *drv_data = dev_get_drvdata(&plat_dev->dev);
+
+	dev_set_drvdata(&plat_dev->dev, NULL);
+
+	i2c_bit_del_bus(&drv_data->adapter);
+
+	kfree(drv_data);
+
+	return 0;
+}
+
+static int ixp2000_i2c_probe(struct device *dev)
+{
+	int err;
+	struct platform_device *plat_dev = to_platform_device(dev);
+	struct ixp2000_i2c_pins *gpio = plat_dev->dev.platform_data;
+	struct ixp2000_i2c_data *drv_data = 
+		kmalloc(sizeof(struct ixp2000_i2c_data), GFP_KERNEL);
+
+	if (!drv_data)
+		return -ENOMEM;
+	memzero(drv_data, sizeof(*drv_data));
+	drv_data->gpio_pins = gpio;
+
+	drv_data->algo_data.data = gpio;
+	drv_data->algo_data.setsda = ixp2000_bit_setsda;
+	drv_data->algo_data.setscl = ixp2000_bit_setscl;
+	drv_data->algo_data.getsda = ixp2000_bit_getsda;
+	drv_data->algo_data.getscl = ixp2000_bit_getscl;
+	drv_data->algo_data.udelay = 6;
+	drv_data->algo_data.mdelay = 6;
+	drv_data->algo_data.timeout = 100;
+
+	drv_data->adapter.id = I2C_HW_B_IXP2000,
+	drv_data->adapter.algo_data = &drv_data->algo_data,
+
+	drv_data->adapter.dev.parent = &plat_dev->dev;
+
+	gpio_line_config(gpio->sda_pin, GPIO_IN);
+	gpio_line_config(gpio->scl_pin, GPIO_IN);
+	gpio_line_set(gpio->scl_pin, 0);
+	gpio_line_set(gpio->sda_pin, 0);
+
+	if ((err = i2c_bit_add_bus(&drv_data->adapter)) != 0) {
+		dev_err(dev, "Could not install, error %d\n", err);
+		kfree(drv_data);
+		return err;
+	} 
+
+	dev_set_drvdata(&plat_dev->dev, drv_data);
+
+	return 0;
+}
+
+static struct device_driver ixp2000_i2c_driver = {
+	.name		= "IXP2000-I2C",
+	.bus		= &platform_bus_type,
+	.probe		= ixp2000_i2c_probe,
+	.remove		= ixp2000_i2c_remove,
+};
+
+static int __init ixp2000_i2c_init(void)
+{
+	return driver_register(&ixp2000_i2c_driver);
+}
+
+static void __exit ixp2000_i2c_exit(void)
+{
+	driver_unregister(&ixp2000_i2c_driver);
+}
+
+module_init(ixp2000_i2c_init);
+module_exit(ixp2000_i2c_exit);
+
+MODULE_AUTHOR ("Deepak Saxena <dsaxena@plexity.net>");
+MODULE_DESCRIPTION("IXP2000 GPIO-based I2C bus driver");
+MODULE_LICENSE("GPL");
+
diff --git a/drivers/i2c/busses/i2c-ixp4xx.c b/drivers/i2c/busses/i2c-ixp4xx.c
new file mode 100644
index 00000000000..8c55eafc3a0
--- /dev/null
+++ b/drivers/i2c/busses/i2c-ixp4xx.c
@@ -0,0 +1,181 @@
+/*
+ * drivers/i2c/i2c-adap-ixp4xx.c
+ *
+ * Intel's IXP4xx XScale NPU chipsets (IXP420, 421, 422, 425) do not have
+ * an on board I2C controller but provide 16 GPIO pins that are often
+ * used to create an I2C bus. This driver provides an i2c_adapter 
+ * interface that plugs in under algo_bit and drives the GPIO pins
+ * as instructed by the alogorithm driver.
+ *
+ * Author: Deepak Saxena <dsaxena@plexity.net>
+ *
+ * Copyright (c) 2003-2004 MontaVista Software Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public 
+ * License version 2. This program is licensed "as is" without any 
+ * warranty of any kind, whether express or implied.
+ *
+ * NOTE: Since different platforms will use different GPIO pins for
+ *       I2C, this driver uses an IXP4xx-specific platform_data
+ *       pointer to pass the GPIO numbers to the driver. This 
+ *       allows us to support all the different IXP4xx platforms
+ *       w/o having to put #ifdefs in this driver.
+ *
+ *       See arch/arm/mach-ixp4xx/ixdp425.c for an example of building a 
+ *       device list and filling in the ixp4xx_i2c_pins data structure 
+ *       that is passed as the platform_data to this driver.
+ */
+
+#include <linux/config.h>
+#ifdef CONFIG_I2C_DEBUG_BUS
+#define DEBUG	1
+#endif
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/i2c-algo-bit.h>
+
+#include <asm/hardware.h>	/* Pick up IXP4xx-specific bits */
+
+static inline int ixp4xx_scl_pin(void *data)
+{
+	return ((struct ixp4xx_i2c_pins*)data)->scl_pin;
+}
+
+static inline int ixp4xx_sda_pin(void *data)
+{
+	return ((struct ixp4xx_i2c_pins*)data)->sda_pin;
+}
+
+static void ixp4xx_bit_setscl(void *data, int val)
+{
+	gpio_line_set(ixp4xx_scl_pin(data), 0);
+	gpio_line_config(ixp4xx_scl_pin(data),
+		val ? IXP4XX_GPIO_IN : IXP4XX_GPIO_OUT );
+}
+
+static void ixp4xx_bit_setsda(void *data, int val)
+{
+	gpio_line_set(ixp4xx_sda_pin(data), 0);
+	gpio_line_config(ixp4xx_sda_pin(data),
+		val ? IXP4XX_GPIO_IN : IXP4XX_GPIO_OUT );
+}
+
+static int ixp4xx_bit_getscl(void *data)
+{
+	int scl;
+
+	gpio_line_config(ixp4xx_scl_pin(data), IXP4XX_GPIO_IN );
+	gpio_line_get(ixp4xx_scl_pin(data), &scl);
+
+	return scl;
+}	
+
+static int ixp4xx_bit_getsda(void *data)
+{
+	int sda;
+
+	gpio_line_config(ixp4xx_sda_pin(data), IXP4XX_GPIO_IN );
+	gpio_line_get(ixp4xx_sda_pin(data), &sda);
+
+	return sda;
+}	
+
+struct ixp4xx_i2c_data {
+	struct ixp4xx_i2c_pins *gpio_pins;
+	struct i2c_adapter adapter;
+	struct i2c_algo_bit_data algo_data;
+};
+
+static int ixp4xx_i2c_remove(struct device *dev)
+{
+	struct platform_device *plat_dev = to_platform_device(dev);
+	struct ixp4xx_i2c_data *drv_data = dev_get_drvdata(&plat_dev->dev);
+
+	dev_set_drvdata(&plat_dev->dev, NULL);
+
+	i2c_bit_del_bus(&drv_data->adapter);
+
+	kfree(drv_data);
+
+	return 0;
+}
+
+static int ixp4xx_i2c_probe(struct device *dev)
+{
+	int err;
+	struct platform_device *plat_dev = to_platform_device(dev);
+	struct ixp4xx_i2c_pins *gpio = plat_dev->dev.platform_data;
+	struct ixp4xx_i2c_data *drv_data = 
+		kmalloc(sizeof(struct ixp4xx_i2c_data), GFP_KERNEL);
+
+	if(!drv_data)
+		return -ENOMEM;
+
+	memzero(drv_data, sizeof(struct ixp4xx_i2c_data));
+	drv_data->gpio_pins = gpio;
+
+	/*
+	 * We could make a lot of these structures static, but
+	 * certain platforms may have multiple GPIO-based I2C
+	 * buses for various device domains, so we need per-device
+	 * algo_data->data. 
+	 */
+	drv_data->algo_data.data = gpio;
+	drv_data->algo_data.setsda = ixp4xx_bit_setsda;
+	drv_data->algo_data.setscl = ixp4xx_bit_setscl;
+	drv_data->algo_data.getsda = ixp4xx_bit_getsda;
+	drv_data->algo_data.getscl = ixp4xx_bit_getscl;
+	drv_data->algo_data.udelay = 10;
+	drv_data->algo_data.mdelay = 10;
+	drv_data->algo_data.timeout = 100;
+
+	drv_data->adapter.id = I2C_HW_B_IXP4XX;
+	drv_data->adapter.algo_data = &drv_data->algo_data;
+
+	drv_data->adapter.dev.parent = &plat_dev->dev;
+
+	gpio_line_config(gpio->scl_pin, IXP4XX_GPIO_IN);
+	gpio_line_config(gpio->sda_pin, IXP4XX_GPIO_IN);
+	gpio_line_set(gpio->scl_pin, 0);
+	gpio_line_set(gpio->sda_pin, 0);
+
+	if ((err = i2c_bit_add_bus(&drv_data->adapter) != 0)) {
+		printk(KERN_ERR "ERROR: Could not install %s\n", dev->bus_id);
+
+		kfree(drv_data);
+		return err;
+	}
+
+	dev_set_drvdata(&plat_dev->dev, drv_data);
+
+	return 0;
+}
+
+static struct device_driver ixp4xx_i2c_driver = {
+	.name		= "IXP4XX-I2C",
+	.bus		= &platform_bus_type,
+	.probe		= ixp4xx_i2c_probe,
+	.remove		= ixp4xx_i2c_remove,
+};
+
+static int __init ixp4xx_i2c_init(void)
+{
+	return driver_register(&ixp4xx_i2c_driver);
+}
+
+static void __exit ixp4xx_i2c_exit(void)
+{
+	driver_unregister(&ixp4xx_i2c_driver);
+}
+
+module_init(ixp4xx_i2c_init);
+module_exit(ixp4xx_i2c_exit);
+
+MODULE_DESCRIPTION("GPIO-based I2C adapter for IXP4xx systems");
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Deepak Saxena <dsaxena@plexity.net>");
+
diff --git a/drivers/i2c/busses/i2c-keywest.c b/drivers/i2c/busses/i2c-keywest.c
new file mode 100644
index 00000000000..dd0d4c46314
--- /dev/null
+++ b/drivers/i2c/busses/i2c-keywest.c
@@ -0,0 +1,763 @@
+/*
+    i2c Support for Apple Keywest I2C Bus Controller
+
+    Copyright (c) 2001 Benjamin Herrenschmidt <benh@kernel.crashing.org>
+
+    Original work by
+    
+    Copyright (c) 2000 Philip Edelbrock <phil@stimpy.netroedge.com>
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+
+    Changes:
+
+    2001/12/13 BenH	New implementation
+    2001/12/15 BenH	Add support for "byte" and "quick"
+                        transfers. Add i2c_xfer routine.
+    2003/09/21 BenH	Rework state machine with Paulus help
+    2004/01/21 BenH	Merge in Greg KH changes, polled mode is back
+    2004/02/05 BenH	Merge 64 bits fixes from the g5 ppc64 tree
+
+    My understanding of the various modes supported by keywest are:
+
+     - Dumb mode : not implemented, probably direct tweaking of lines
+     - Standard mode : simple i2c transaction of type
+         S Addr R/W A Data A Data ... T
+     - Standard sub mode : combined 8 bit subaddr write with data read
+         S Addr R/W A SubAddr A Data A Data ... T
+     - Combined mode : Subaddress and Data sequences appended with no stop
+         S Addr R/W A SubAddr S Addr R/W A Data A Data ... T
+
+    Currently, this driver uses only Standard mode for i2c xfer, and
+    smbus byte & quick transfers ; and uses StandardSub mode for
+    other smbus transfers instead of combined as we need that for the
+    sound driver to be happy
+*/
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/ioport.h>
+#include <linux/pci.h>
+#include <linux/types.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/timer.h>
+#include <linux/spinlock.h>
+#include <linux/completion.h>
+#include <linux/interrupt.h>
+
+#include <asm/io.h>
+#include <asm/prom.h>
+#include <asm/machdep.h>
+#include <asm/pmac_feature.h>
+#include <asm/pmac_low_i2c.h>
+
+#include "i2c-keywest.h"
+
+#undef POLLED_MODE
+
+/* Some debug macros */
+#define WRONG_STATE(name) do {\
+		pr_debug("KW: wrong state. Got %s, state: %s (isr: %02x)\n", \
+			 name, __kw_state_names[iface->state], isr);	\
+	} while(0)
+
+#ifdef DEBUG
+static const char *__kw_state_names[] = {
+	"state_idle",
+	"state_addr",
+	"state_read",
+	"state_write",
+	"state_stop",
+	"state_dead"
+};
+#endif /* DEBUG */
+
+static int probe;
+
+MODULE_AUTHOR("Benjamin Herrenschmidt <benh@kernel.crashing.org>");
+MODULE_DESCRIPTION("I2C driver for Apple's Keywest");
+MODULE_LICENSE("GPL");
+module_param(probe, bool, 0);
+
+#ifdef POLLED_MODE
+/* Don't schedule, the g5 fan controller is too
+ * timing sensitive
+ */
+static u8
+wait_interrupt(struct keywest_iface* iface)
+{
+	int i;
+	u8 isr;
+	
+	for (i = 0; i < 200000; i++) {
+		isr = read_reg(reg_isr) & KW_I2C_IRQ_MASK;
+		if (isr != 0)
+			return isr;
+		udelay(10);
+	}
+	return isr;
+}
+#endif /* POLLED_MODE */
+
+static void
+do_stop(struct keywest_iface* iface, int result)
+{
+	write_reg(reg_control, KW_I2C_CTL_STOP);
+	iface->state = state_stop;
+	iface->result = result;
+}
+
+/* Main state machine for standard & standard sub mode */
+static void
+handle_interrupt(struct keywest_iface *iface, u8 isr)
+{
+	int ack;
+	
+	if (isr == 0) {
+		if (iface->state != state_stop) {
+			pr_debug("KW: Timeout !\n");
+			do_stop(iface, -EIO);
+		}
+		if (iface->state == state_stop) {
+			ack = read_reg(reg_status);
+			if (!(ack & KW_I2C_STAT_BUSY)) {
+				iface->state = state_idle;
+				write_reg(reg_ier, 0x00);
+#ifndef POLLED_MODE
+				complete(&iface->complete);
+#endif /* POLLED_MODE */
+			}
+		}
+		return;
+	}
+
+	if (isr & KW_I2C_IRQ_ADDR) {
+		ack = read_reg(reg_status);
+		if (iface->state != state_addr) {
+			write_reg(reg_isr, KW_I2C_IRQ_ADDR);
+			WRONG_STATE("KW_I2C_IRQ_ADDR"); 
+			do_stop(iface, -EIO);
+			return;
+		}
+		if ((ack & KW_I2C_STAT_LAST_AAK) == 0) {
+			iface->state = state_stop;		     
+			iface->result = -ENODEV;
+			pr_debug("KW: NAK on address\n");
+		} else {
+			/* Handle rw "quick" mode */
+			if (iface->datalen == 0) {
+				do_stop(iface, 0);
+			} else if (iface->read_write == I2C_SMBUS_READ) {
+				iface->state = state_read;
+				if (iface->datalen > 1)
+					write_reg(reg_control, KW_I2C_CTL_AAK);
+			} else {
+				iface->state = state_write;
+				write_reg(reg_data, *(iface->data++));
+				iface->datalen--;
+			}
+		}
+		write_reg(reg_isr, KW_I2C_IRQ_ADDR);
+	}
+
+	if (isr & KW_I2C_IRQ_DATA) {
+		if (iface->state == state_read) {
+			*(iface->data++) = read_reg(reg_data);
+			write_reg(reg_isr, KW_I2C_IRQ_DATA);
+			iface->datalen--;
+			if (iface->datalen == 0)
+				iface->state = state_stop;
+			else if (iface->datalen == 1)
+				write_reg(reg_control, 0);
+		} else if (iface->state == state_write) {
+			/* Check ack status */
+			ack = read_reg(reg_status);
+			if ((ack & KW_I2C_STAT_LAST_AAK) == 0) {
+				pr_debug("KW: nack on data write (%x): %x\n",
+				    iface->data[-1], ack);
+				do_stop(iface, -EIO);
+			} else if (iface->datalen) {
+				write_reg(reg_data, *(iface->data++));
+				iface->datalen--;
+			} else {
+				write_reg(reg_control, KW_I2C_CTL_STOP);
+				iface->state = state_stop;
+				iface->result = 0;
+			}
+			write_reg(reg_isr, KW_I2C_IRQ_DATA);
+		} else {
+			write_reg(reg_isr, KW_I2C_IRQ_DATA);
+			WRONG_STATE("KW_I2C_IRQ_DATA"); 
+			if (iface->state != state_stop)
+				do_stop(iface, -EIO);
+		}
+	}
+
+	if (isr & KW_I2C_IRQ_STOP) {
+		write_reg(reg_isr, KW_I2C_IRQ_STOP);
+		if (iface->state != state_stop) {
+			WRONG_STATE("KW_I2C_IRQ_STOP");
+			iface->result = -EIO;
+		}
+		iface->state = state_idle;
+		write_reg(reg_ier, 0x00);
+#ifndef POLLED_MODE
+		complete(&iface->complete);
+#endif /* POLLED_MODE */			
+	}
+
+	if (isr & KW_I2C_IRQ_START)
+		write_reg(reg_isr, KW_I2C_IRQ_START);
+}
+
+#ifndef POLLED_MODE
+
+/* Interrupt handler */
+static irqreturn_t
+keywest_irq(int irq, void *dev_id, struct pt_regs *regs)
+{
+	struct keywest_iface *iface = (struct keywest_iface *)dev_id;
+	unsigned long flags;
+
+	spin_lock_irqsave(&iface->lock, flags);
+	del_timer(&iface->timeout_timer);
+	handle_interrupt(iface, read_reg(reg_isr));
+	if (iface->state != state_idle) {
+		iface->timeout_timer.expires = jiffies + POLL_TIMEOUT;
+		add_timer(&iface->timeout_timer);
+	}
+	spin_unlock_irqrestore(&iface->lock, flags);
+	return IRQ_HANDLED;
+}
+
+static void
+keywest_timeout(unsigned long data)
+{
+	struct keywest_iface *iface = (struct keywest_iface *)data;
+	unsigned long flags;
+
+	pr_debug("timeout !\n");
+	spin_lock_irqsave(&iface->lock, flags);
+	handle_interrupt(iface, read_reg(reg_isr));
+	if (iface->state != state_idle) {
+		iface->timeout_timer.expires = jiffies + POLL_TIMEOUT;
+		add_timer(&iface->timeout_timer);
+	}
+	spin_unlock_irqrestore(&iface->lock, flags);
+}
+
+#endif /* POLLED_MODE */
+
+/*
+ * SMBUS-type transfer entrypoint
+ */
+static s32
+keywest_smbus_xfer(	struct i2c_adapter*	adap,
+			u16			addr,
+			unsigned short		flags,
+			char			read_write,
+			u8			command,
+			int			size,
+			union i2c_smbus_data*	data)
+{
+	struct keywest_chan* chan = i2c_get_adapdata(adap);
+	struct keywest_iface* iface = chan->iface;
+	int len;
+	u8* buffer;
+	u16 cur_word;
+	int rc = 0;
+
+	if (iface->state == state_dead)
+		return -ENXIO;
+		
+	/* Prepare datas & select mode */
+	iface->cur_mode &= ~KW_I2C_MODE_MODE_MASK;
+	switch (size) {
+        case I2C_SMBUS_QUICK:
+	    	len = 0;
+	    	buffer = NULL;
+	    	iface->cur_mode |= KW_I2C_MODE_STANDARD;
+	    	break;
+        case I2C_SMBUS_BYTE:
+	    	len = 1;
+	    	buffer = &data->byte;
+	    	iface->cur_mode |= KW_I2C_MODE_STANDARD;
+	    	break;
+        case I2C_SMBUS_BYTE_DATA:
+	    	len = 1;
+	    	buffer = &data->byte;
+	    	iface->cur_mode |= KW_I2C_MODE_STANDARDSUB;
+	    	break;
+        case I2C_SMBUS_WORD_DATA:
+	    	len = 2;
+	    	cur_word = cpu_to_le16(data->word);
+	    	buffer = (u8 *)&cur_word;
+	    	iface->cur_mode |= KW_I2C_MODE_STANDARDSUB;
+		break;
+        case I2C_SMBUS_BLOCK_DATA:
+	    	len = data->block[0];
+	    	buffer = &data->block[1];
+	    	iface->cur_mode |= KW_I2C_MODE_STANDARDSUB;
+		break;
+        default:
+	    	return -1;
+	}
+
+	/* Turn a standardsub read into a combined mode access */
+ 	if (read_write == I2C_SMBUS_READ
+ 	    && (iface->cur_mode & KW_I2C_MODE_MODE_MASK) == KW_I2C_MODE_STANDARDSUB) {
+ 		iface->cur_mode &= ~KW_I2C_MODE_MODE_MASK;
+ 		iface->cur_mode |= KW_I2C_MODE_COMBINED;
+ 	}
+
+	/* Original driver had this limitation */
+	if (len > 32)
+		len = 32;
+
+	if (pmac_low_i2c_lock(iface->node))
+		return -ENXIO;
+
+	pr_debug("chan: %d, addr: 0x%x, transfer len: %d, read: %d\n",
+		chan->chan_no, addr, len, read_write == I2C_SMBUS_READ);
+
+	iface->data = buffer;
+	iface->datalen = len;
+	iface->state = state_addr;
+	iface->result = 0;
+	iface->read_write = read_write;
+	
+	/* Setup channel & clear pending irqs */
+	write_reg(reg_isr, read_reg(reg_isr));
+	write_reg(reg_mode, iface->cur_mode | (chan->chan_no << 4));
+	write_reg(reg_status, 0);
+
+	/* Set up address and r/w bit */
+	write_reg(reg_addr,
+		(addr << 1) | ((read_write == I2C_SMBUS_READ) ? 0x01 : 0x00));
+
+	/* Set up the sub address */
+	if ((iface->cur_mode & KW_I2C_MODE_MODE_MASK) == KW_I2C_MODE_STANDARDSUB
+	    || (iface->cur_mode & KW_I2C_MODE_MODE_MASK) == KW_I2C_MODE_COMBINED)
+		write_reg(reg_subaddr, command);
+
+#ifndef POLLED_MODE
+	/* Arm timeout */
+	iface->timeout_timer.expires = jiffies + POLL_TIMEOUT;
+	add_timer(&iface->timeout_timer);
+#endif
+
+	/* Start sending address & enable interrupt*/
+	write_reg(reg_control, KW_I2C_CTL_XADDR);
+	write_reg(reg_ier, KW_I2C_IRQ_MASK);
+
+#ifdef POLLED_MODE
+	pr_debug("using polled mode...\n");
+	/* State machine, to turn into an interrupt handler */
+	while(iface->state != state_idle) {
+		unsigned long flags;
+
+		u8 isr = wait_interrupt(iface);
+		spin_lock_irqsave(&iface->lock, flags);
+		handle_interrupt(iface, isr);
+		spin_unlock_irqrestore(&iface->lock, flags);
+	}
+#else /* POLLED_MODE */
+	pr_debug("using interrupt mode...\n");
+	wait_for_completion(&iface->complete);	
+#endif /* POLLED_MODE */	
+
+	rc = iface->result;	
+	pr_debug("transfer done, result: %d\n", rc);
+
+	if (rc == 0 && size == I2C_SMBUS_WORD_DATA && read_write == I2C_SMBUS_READ)
+	    	data->word = le16_to_cpu(cur_word);
+	
+	/* Release sem */
+	pmac_low_i2c_unlock(iface->node);
+	
+	return rc;
+}
+
+/*
+ * Generic i2c master transfer entrypoint
+ */
+static int
+keywest_xfer(	struct i2c_adapter *adap,
+		struct i2c_msg *msgs, 
+		int num)
+{
+	struct keywest_chan* chan = i2c_get_adapdata(adap);
+	struct keywest_iface* iface = chan->iface;
+	struct i2c_msg *pmsg;
+	int i, completed;
+	int rc = 0;
+
+	if (iface->state == state_dead)
+		return -ENXIO;
+
+	if (pmac_low_i2c_lock(iface->node))
+		return -ENXIO;
+
+	/* Set adapter to standard mode */
+	iface->cur_mode &= ~KW_I2C_MODE_MODE_MASK;
+	iface->cur_mode |= KW_I2C_MODE_STANDARD;
+
+	completed = 0;
+	for (i = 0; rc >= 0 && i < num;) {
+		u8 addr;
+		
+		pmsg = &msgs[i++];
+		addr = pmsg->addr;
+		if (pmsg->flags & I2C_M_TEN) {
+			printk(KERN_ERR "i2c-keywest: 10 bits addr not supported !\n");
+			rc = -EINVAL;
+			break;
+		}
+		pr_debug("xfer: chan: %d, doing %s %d bytes to 0x%02x - %d of %d messages\n",
+		     chan->chan_no,
+		     pmsg->flags & I2C_M_RD ? "read" : "write",
+                     pmsg->len, addr, i, num);
+    
+		/* Setup channel & clear pending irqs */
+		write_reg(reg_mode, iface->cur_mode | (chan->chan_no << 4));
+		write_reg(reg_isr, read_reg(reg_isr));
+		write_reg(reg_status, 0);
+		
+		iface->data = pmsg->buf;
+		iface->datalen = pmsg->len;
+		iface->state = state_addr;
+		iface->result = 0;
+		if (pmsg->flags & I2C_M_RD)
+			iface->read_write = I2C_SMBUS_READ;
+		else
+			iface->read_write = I2C_SMBUS_WRITE;
+
+		/* Set up address and r/w bit */
+		if (pmsg->flags & I2C_M_REV_DIR_ADDR)
+			addr ^= 1;		
+		write_reg(reg_addr,
+			(addr << 1) |
+			((iface->read_write == I2C_SMBUS_READ) ? 0x01 : 0x00));
+
+#ifndef POLLED_MODE
+		/* Arm timeout */
+		iface->timeout_timer.expires = jiffies + POLL_TIMEOUT;
+		add_timer(&iface->timeout_timer);
+#endif
+
+		/* Start sending address & enable interrupt*/
+		write_reg(reg_ier, KW_I2C_IRQ_MASK);
+		write_reg(reg_control, KW_I2C_CTL_XADDR);
+
+#ifdef POLLED_MODE
+		pr_debug("using polled mode...\n");
+		/* State machine, to turn into an interrupt handler */
+		while(iface->state != state_idle) {
+			u8 isr = wait_interrupt(iface);
+			handle_interrupt(iface, isr);
+		}
+#else /* POLLED_MODE */
+		pr_debug("using interrupt mode...\n");
+		wait_for_completion(&iface->complete);	
+#endif /* POLLED_MODE */	
+
+		rc = iface->result;
+		if (rc == 0)
+			completed++;
+		pr_debug("transfer done, result: %d\n", rc);
+	}
+
+	/* Release sem */
+	pmac_low_i2c_unlock(iface->node);
+
+	return completed;
+}
+
+static u32
+keywest_func(struct i2c_adapter * adapter)
+{
+	return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE |
+	       I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA |
+	       I2C_FUNC_SMBUS_BLOCK_DATA;
+}
+
+/* For now, we only handle combined mode (smbus) */
+static struct i2c_algorithm keywest_algorithm = {
+	.name		= "Keywest i2c",
+	.id		= I2C_ALGO_SMBUS,
+	.smbus_xfer	= keywest_smbus_xfer,
+	.master_xfer	= keywest_xfer,
+	.functionality	= keywest_func,
+};
+
+
+static int
+create_iface(struct device_node *np, struct device *dev)
+{
+	unsigned long steps;
+	unsigned bsteps, tsize, i, nchan, addroffset;
+	struct keywest_iface* iface;
+	u32 *psteps, *prate;
+	int rc;
+
+	if (pmac_low_i2c_lock(np))
+		return -ENODEV;
+
+	psteps = (u32 *)get_property(np, "AAPL,address-step", NULL);
+	steps = psteps ? (*psteps) : 0x10;
+
+	/* Hrm... maybe we can be smarter here */
+	for (bsteps = 0; (steps & 0x01) == 0; bsteps++)
+		steps >>= 1;
+
+	if (np->parent->name[0] == 'u') {
+		nchan = 2;
+		addroffset = 3;
+	} else {
+		addroffset = 0;
+		nchan = 1;
+	}
+
+	tsize = sizeof(struct keywest_iface) +
+		(sizeof(struct keywest_chan) + 4) * nchan;
+	iface = (struct keywest_iface *) kmalloc(tsize, GFP_KERNEL);
+	if (iface == NULL) {
+		printk(KERN_ERR "i2c-keywest: can't allocate inteface !\n");
+		pmac_low_i2c_unlock(np);
+		return -ENOMEM;
+	}
+	memset(iface, 0, tsize);
+	spin_lock_init(&iface->lock);
+	init_completion(&iface->complete);
+	iface->node = of_node_get(np);
+	iface->bsteps = bsteps;
+	iface->chan_count = nchan;
+	iface->state = state_idle;
+	iface->irq = np->intrs[0].line;
+	iface->channels = (struct keywest_chan *)
+		(((unsigned long)(iface + 1) + 3UL) & ~3UL);
+	iface->base = ioremap(np->addrs[0].address + addroffset,
+						np->addrs[0].size);
+	if (!iface->base) {
+		printk(KERN_ERR "i2c-keywest: can't map inteface !\n");
+		kfree(iface);
+		pmac_low_i2c_unlock(np);
+		return -ENOMEM;
+	}
+
+#ifndef POLLED_MODE
+	init_timer(&iface->timeout_timer);
+	iface->timeout_timer.function = keywest_timeout;
+	iface->timeout_timer.data = (unsigned long)iface;
+#endif
+
+	/* Select interface rate */
+	iface->cur_mode = KW_I2C_MODE_100KHZ;
+	prate = (u32 *)get_property(np, "AAPL,i2c-rate", NULL);
+	if (prate) switch(*prate) {
+	case 100:
+		iface->cur_mode = KW_I2C_MODE_100KHZ;
+		break;
+	case 50:
+		iface->cur_mode = KW_I2C_MODE_50KHZ;
+		break;
+	case 25:
+		iface->cur_mode = KW_I2C_MODE_25KHZ;
+		break;
+	default:
+		printk(KERN_WARNING "i2c-keywest: unknown rate %ldKhz, using 100KHz\n",
+		       (long)*prate);
+	}
+	
+	/* Select standard mode by default */
+	iface->cur_mode |= KW_I2C_MODE_STANDARD;
+	
+	/* Write mode */
+	write_reg(reg_mode, iface->cur_mode);
+	
+	/* Switch interrupts off & clear them*/
+	write_reg(reg_ier, 0x00);
+	write_reg(reg_isr, KW_I2C_IRQ_MASK);
+
+#ifndef POLLED_MODE
+	/* Request chip interrupt */	
+	rc = request_irq(iface->irq, keywest_irq, SA_INTERRUPT, "keywest i2c", iface);
+	if (rc) {
+		printk(KERN_ERR "i2c-keywest: can't get IRQ %d !\n", iface->irq);
+		iounmap(iface->base);
+		kfree(iface);
+		pmac_low_i2c_unlock(np);
+		return -ENODEV;
+	}
+#endif /* POLLED_MODE */
+
+	pmac_low_i2c_unlock(np);
+	dev_set_drvdata(dev, iface);
+	
+	for (i=0; i<nchan; i++) {
+		struct keywest_chan* chan = &iface->channels[i];
+		u8 addr;
+		
+		sprintf(chan->adapter.name, "%s %d", np->parent->name, i);
+		chan->iface = iface;
+		chan->chan_no = i;
+		chan->adapter.id = I2C_ALGO_SMBUS;
+		chan->adapter.algo = &keywest_algorithm;
+		chan->adapter.algo_data = NULL;
+		chan->adapter.client_register = NULL;
+		chan->adapter.client_unregister = NULL;
+		i2c_set_adapdata(&chan->adapter, chan);
+		chan->adapter.dev.parent = dev;
+
+		rc = i2c_add_adapter(&chan->adapter);
+		if (rc) {
+			printk("i2c-keywest.c: Adapter %s registration failed\n",
+				chan->adapter.name);
+			i2c_set_adapdata(&chan->adapter, NULL);
+		}
+		if (probe) {
+			printk("Probe: ");
+			for (addr = 0x00; addr <= 0x7f; addr++) {
+				if (i2c_smbus_xfer(&chan->adapter,addr,
+				    0,0,0,I2C_SMBUS_QUICK,NULL) >= 0)
+					printk("%02x ", addr);
+			}
+			printk("\n");
+		}
+	}
+
+	printk(KERN_INFO "Found KeyWest i2c on \"%s\", %d channel%s, stepping: %d bits\n",
+		np->parent->name, nchan, nchan > 1 ? "s" : "", bsteps);
+		
+	return 0;
+}
+
+static int
+dispose_iface(struct device *dev)
+{
+	struct keywest_iface *iface = dev_get_drvdata(dev);
+	int i, rc;
+	
+	/* Make sure we stop all activity */
+	if (pmac_low_i2c_lock(iface->node))
+		return -ENODEV;
+
+#ifndef POLLED_MODE
+	spin_lock_irq(&iface->lock);
+	while (iface->state != state_idle) {
+		spin_unlock_irq(&iface->lock);
+		msleep(100);
+		spin_lock_irq(&iface->lock);
+	}
+#endif /* POLLED_MODE */
+	iface->state = state_dead;
+#ifndef POLLED_MODE
+	spin_unlock_irq(&iface->lock);
+	free_irq(iface->irq, iface);
+#endif /* POLLED_MODE */
+
+	pmac_low_i2c_unlock(iface->node);
+
+	/* Release all channels */
+	for (i=0; i<iface->chan_count; i++) {
+		struct keywest_chan* chan = &iface->channels[i];
+		if (i2c_get_adapdata(&chan->adapter) == NULL)
+			continue;
+		rc = i2c_del_adapter(&chan->adapter);
+		i2c_set_adapdata(&chan->adapter, NULL);
+		/* We aren't that prepared to deal with this... */
+		if (rc)
+			printk("i2c-keywest.c: i2c_del_adapter failed, that's bad !\n");
+	}
+	iounmap(iface->base);
+	dev_set_drvdata(dev, NULL);
+	of_node_put(iface->node);
+	kfree(iface);
+
+	return 0;
+}
+
+static int
+create_iface_macio(struct macio_dev* dev, const struct of_match *match)
+{
+	return create_iface(dev->ofdev.node, &dev->ofdev.dev);
+}
+
+static int
+dispose_iface_macio(struct macio_dev* dev)
+{
+	return dispose_iface(&dev->ofdev.dev);
+}
+
+static int
+create_iface_of_platform(struct of_device* dev, const struct of_match *match)
+{
+	return create_iface(dev->node, &dev->dev);
+}
+
+static int
+dispose_iface_of_platform(struct of_device* dev)
+{
+	return dispose_iface(&dev->dev);
+}
+
+static struct of_match i2c_keywest_match[] = 
+{
+	{
+	.name 		= OF_ANY_MATCH,
+	.type		= "i2c",
+	.compatible	= "keywest"
+	},
+	{},
+};
+
+static struct macio_driver i2c_keywest_macio_driver = 
+{
+	.name 		= "i2c-keywest",
+	.match_table	= i2c_keywest_match,
+	.probe		= create_iface_macio,
+	.remove		= dispose_iface_macio
+};
+
+static struct of_platform_driver i2c_keywest_of_platform_driver = 
+{
+	.name 		= "i2c-keywest",
+	.match_table	= i2c_keywest_match,
+	.probe		= create_iface_of_platform,
+	.remove		= dispose_iface_of_platform
+};
+
+static int __init
+i2c_keywest_init(void)
+{
+	of_register_driver(&i2c_keywest_of_platform_driver);
+	macio_register_driver(&i2c_keywest_macio_driver);
+
+	return 0;
+}
+
+static void __exit
+i2c_keywest_cleanup(void)
+{
+	of_unregister_driver(&i2c_keywest_of_platform_driver);
+	macio_unregister_driver(&i2c_keywest_macio_driver);
+}
+
+module_init(i2c_keywest_init);
+module_exit(i2c_keywest_cleanup);
diff --git a/drivers/i2c/busses/i2c-keywest.h b/drivers/i2c/busses/i2c-keywest.h
new file mode 100644
index 00000000000..c5022e1ca6f
--- /dev/null
+++ b/drivers/i2c/busses/i2c-keywest.h
@@ -0,0 +1,108 @@
+#ifndef __I2C_KEYWEST_H__
+#define __I2C_KEYWEST_H__
+
+/* The Tumbler audio equalizer can be really slow sometimes */
+#define POLL_TIMEOUT		(2*HZ)
+
+/* Register indices */
+typedef enum {
+	reg_mode = 0,
+	reg_control,
+	reg_status,
+	reg_isr,
+	reg_ier,
+	reg_addr,
+	reg_subaddr,
+	reg_data
+} reg_t;
+
+
+/* Mode register */
+#define KW_I2C_MODE_100KHZ	0x00
+#define KW_I2C_MODE_50KHZ	0x01
+#define KW_I2C_MODE_25KHZ	0x02
+#define KW_I2C_MODE_DUMB	0x00
+#define KW_I2C_MODE_STANDARD	0x04
+#define KW_I2C_MODE_STANDARDSUB	0x08
+#define KW_I2C_MODE_COMBINED	0x0C
+#define KW_I2C_MODE_MODE_MASK	0x0C
+#define KW_I2C_MODE_CHAN_MASK	0xF0
+
+/* Control register */
+#define KW_I2C_CTL_AAK		0x01
+#define KW_I2C_CTL_XADDR	0x02
+#define KW_I2C_CTL_STOP		0x04
+#define KW_I2C_CTL_START	0x08
+
+/* Status register */
+#define KW_I2C_STAT_BUSY	0x01
+#define KW_I2C_STAT_LAST_AAK	0x02
+#define KW_I2C_STAT_LAST_RW	0x04
+#define KW_I2C_STAT_SDA		0x08
+#define KW_I2C_STAT_SCL		0x10
+
+/* IER & ISR registers */
+#define KW_I2C_IRQ_DATA		0x01
+#define KW_I2C_IRQ_ADDR		0x02
+#define KW_I2C_IRQ_STOP		0x04
+#define KW_I2C_IRQ_START	0x08
+#define KW_I2C_IRQ_MASK		0x0F
+
+/* Physical interface */
+struct keywest_iface
+{
+	struct device_node	*node;
+	void __iomem *		base;
+	unsigned		bsteps;
+	int			irq;
+	spinlock_t		lock;
+	struct keywest_chan	*channels;
+	unsigned		chan_count;
+	u8			cur_mode;
+	char			read_write;
+	u8			*data;
+	unsigned		datalen;
+	int			state;
+	int			result;
+	struct timer_list	timeout_timer;
+	struct completion	complete;
+};
+
+enum {
+	state_idle,
+	state_addr,
+	state_read,
+	state_write,
+	state_stop,
+	state_dead
+};
+
+/* Channel on an interface */
+struct keywest_chan
+{
+	struct i2c_adapter	adapter;
+	struct keywest_iface*	iface;
+	unsigned		chan_no;
+};
+
+/* Register access */
+
+static inline u8 __read_reg(struct keywest_iface *iface, reg_t reg)
+{
+	return in_8(iface->base
+		+ (((unsigned)reg) << iface->bsteps));
+}
+
+static inline void __write_reg(struct keywest_iface *iface, reg_t reg, u8 val)
+{
+	out_8(iface->base
+		+ (((unsigned)reg) << iface->bsteps), val);
+	(void)__read_reg(iface, reg_subaddr);
+}
+
+#define write_reg(reg, val)	__write_reg(iface, reg, val) 
+#define read_reg(reg)		__read_reg(iface, reg) 
+
+
+
+#endif /* __I2C_KEYWEST_H__ */
diff --git a/drivers/i2c/busses/i2c-mpc.c b/drivers/i2c/busses/i2c-mpc.c
new file mode 100644
index 00000000000..75b8d867dae
--- /dev/null
+++ b/drivers/i2c/busses/i2c-mpc.c
@@ -0,0 +1,496 @@
+/*
+ * (C) Copyright 2003-2004
+ * Humboldt Solutions Ltd, adrian@humboldt.co.uk.
+
+ * This is a combined i2c adapter and algorithm driver for the
+ * MPC107/Tsi107 PowerPC northbridge and processors that include
+ * the same I2C unit (8240, 8245, 85xx).
+ *
+ * Release 0.8
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <asm/io.h>
+#ifdef CONFIG_FSL_OCP
+#include <asm/ocp.h>
+#define FSL_I2C_DEV_SEPARATE_DFSRR FS_I2C_SEPARATE_DFSRR
+#define FSL_I2C_DEV_CLOCK_5200 FS_I2C_CLOCK_5200
+#else
+#include <linux/fsl_devices.h>
+#endif
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+
+#define MPC_I2C_ADDR  0x00
+#define MPC_I2C_FDR 	0x04
+#define MPC_I2C_CR	0x08
+#define MPC_I2C_SR	0x0c
+#define MPC_I2C_DR	0x10
+#define MPC_I2C_DFSRR 0x14
+#define MPC_I2C_REGION 0x20
+
+#define CCR_MEN  0x80
+#define CCR_MIEN 0x40
+#define CCR_MSTA 0x20
+#define CCR_MTX  0x10
+#define CCR_TXAK 0x08
+#define CCR_RSTA 0x04
+
+#define CSR_MCF  0x80
+#define CSR_MAAS 0x40
+#define CSR_MBB  0x20
+#define CSR_MAL  0x10
+#define CSR_SRW  0x04
+#define CSR_MIF  0x02
+#define CSR_RXAK 0x01
+
+struct mpc_i2c {
+	char *base;
+	u32 interrupt;
+	wait_queue_head_t queue;
+	struct i2c_adapter adap;
+	int irq;
+	u32 flags;
+};
+
+static __inline__ void writeccr(struct mpc_i2c *i2c, u32 x)
+{
+	writeb(x, i2c->base + MPC_I2C_CR);
+}
+
+static irqreturn_t mpc_i2c_isr(int irq, void *dev_id, struct pt_regs *regs)
+{
+	struct mpc_i2c *i2c = dev_id;
+	if (readb(i2c->base + MPC_I2C_SR) & CSR_MIF) {
+		/* Read again to allow register to stabilise */
+		i2c->interrupt = readb(i2c->base + MPC_I2C_SR);
+		writeb(0, i2c->base + MPC_I2C_SR);
+		wake_up_interruptible(&i2c->queue);
+	}
+	return IRQ_HANDLED;
+}
+
+static int i2c_wait(struct mpc_i2c *i2c, unsigned timeout, int writing)
+{
+	unsigned long orig_jiffies = jiffies;
+	u32 x;
+	int result = 0;
+
+	if (i2c->irq == 0)
+	{
+		while (!(readb(i2c->base + MPC_I2C_SR) & CSR_MIF)) {
+			schedule();
+			if (time_after(jiffies, orig_jiffies + timeout)) {
+				pr_debug("I2C: timeout\n");
+				result = -EIO;
+				break;
+			}
+		}
+		x = readb(i2c->base + MPC_I2C_SR);
+		writeb(0, i2c->base + MPC_I2C_SR);
+	} else {
+		/* Interrupt mode */
+		result = wait_event_interruptible_timeout(i2c->queue,
+			(i2c->interrupt & CSR_MIF), timeout * HZ);
+
+		if (unlikely(result < 0))
+			pr_debug("I2C: wait interrupted\n");
+		else if (unlikely(!(i2c->interrupt & CSR_MIF))) {
+			pr_debug("I2C: wait timeout\n");
+			result = -ETIMEDOUT;
+		}
+
+		x = i2c->interrupt;
+		i2c->interrupt = 0;
+	}
+
+	if (result < 0)
+		return result;
+
+	if (!(x & CSR_MCF)) {
+		pr_debug("I2C: unfinished\n");
+		return -EIO;
+	}
+
+	if (x & CSR_MAL) {
+		pr_debug("I2C: MAL\n");
+		return -EIO;
+	}
+
+	if (writing && (x & CSR_RXAK)) {
+		pr_debug("I2C: No RXAK\n");
+		/* generate stop */
+		writeccr(i2c, CCR_MEN);
+		return -EIO;
+	}
+	return 0;
+}
+
+static void mpc_i2c_setclock(struct mpc_i2c *i2c)
+{
+	/* Set clock and filters */
+	if (i2c->flags & FSL_I2C_DEV_SEPARATE_DFSRR) {
+		writeb(0x31, i2c->base + MPC_I2C_FDR);
+		writeb(0x10, i2c->base + MPC_I2C_DFSRR);
+	} else if (i2c->flags & FSL_I2C_DEV_CLOCK_5200)
+		writeb(0x3f, i2c->base + MPC_I2C_FDR);
+	else
+		writel(0x1031, i2c->base + MPC_I2C_FDR);
+}
+
+static void mpc_i2c_start(struct mpc_i2c *i2c)
+{
+	/* Clear arbitration */
+	writeb(0, i2c->base + MPC_I2C_SR);
+	/* Start with MEN */
+	writeccr(i2c, CCR_MEN);
+}
+
+static void mpc_i2c_stop(struct mpc_i2c *i2c)
+{
+	writeccr(i2c, CCR_MEN);
+}
+
+static int mpc_write(struct mpc_i2c *i2c, int target,
+		     const u8 * data, int length, int restart)
+{
+	int i;
+	unsigned timeout = i2c->adap.timeout;
+	u32 flags = restart ? CCR_RSTA : 0;
+
+	/* Start with MEN */
+	if (!restart)
+		writeccr(i2c, CCR_MEN);
+	/* Start as master */
+	writeccr(i2c, CCR_MIEN | CCR_MEN | CCR_MSTA | CCR_MTX | flags);
+	/* Write target byte */
+	writeb((target << 1), i2c->base + MPC_I2C_DR);
+
+	if (i2c_wait(i2c, timeout, 1) < 0)
+		return -1;
+
+	for (i = 0; i < length; i++) {
+		/* Write data byte */
+		writeb(data[i], i2c->base + MPC_I2C_DR);
+
+		if (i2c_wait(i2c, timeout, 1) < 0)
+			return -1;
+	}
+
+	return 0;
+}
+
+static int mpc_read(struct mpc_i2c *i2c, int target,
+		    u8 * data, int length, int restart)
+{
+	unsigned timeout = i2c->adap.timeout;
+	int i;
+	u32 flags = restart ? CCR_RSTA : 0;
+
+	/* Start with MEN */
+	if (!restart)
+		writeccr(i2c, CCR_MEN);
+	/* Switch to read - restart */
+	writeccr(i2c, CCR_MIEN | CCR_MEN | CCR_MSTA | CCR_MTX | flags);
+	/* Write target address byte - this time with the read flag set */
+	writeb((target << 1) | 1, i2c->base + MPC_I2C_DR);
+
+	if (i2c_wait(i2c, timeout, 1) < 0)
+		return -1;
+
+	if (length) {
+		if (length == 1)
+			writeccr(i2c, CCR_MIEN | CCR_MEN | CCR_MSTA | CCR_TXAK);
+		else
+			writeccr(i2c, CCR_MIEN | CCR_MEN | CCR_MSTA);
+		/* Dummy read */
+		readb(i2c->base + MPC_I2C_DR);
+	}
+
+	for (i = 0; i < length; i++) {
+		if (i2c_wait(i2c, timeout, 0) < 0)
+			return -1;
+
+		/* Generate txack on next to last byte */
+		if (i == length - 2)
+			writeccr(i2c, CCR_MIEN | CCR_MEN | CCR_MSTA | CCR_TXAK);
+		/* Generate stop on last byte */
+		if (i == length - 1)
+			writeccr(i2c, CCR_MIEN | CCR_MEN | CCR_TXAK);
+		data[i] = readb(i2c->base + MPC_I2C_DR);
+	}
+
+	return length;
+}
+
+static int mpc_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
+{
+	struct i2c_msg *pmsg;
+	int i;
+	int ret = 0;
+	unsigned long orig_jiffies = jiffies;
+	struct mpc_i2c *i2c = i2c_get_adapdata(adap);
+
+	mpc_i2c_start(i2c);
+
+	/* Allow bus up to 1s to become not busy */
+	while (readb(i2c->base + MPC_I2C_SR) & CSR_MBB) {
+		if (signal_pending(current)) {
+			pr_debug("I2C: Interrupted\n");
+			return -EINTR;
+		}
+		if (time_after(jiffies, orig_jiffies + HZ)) {
+			pr_debug("I2C: timeout\n");
+			return -EIO;
+		}
+		schedule();
+	}
+
+	for (i = 0; ret >= 0 && i < num; i++) {
+		pmsg = &msgs[i];
+		pr_debug("Doing %s %d bytes to 0x%02x - %d of %d messages\n",
+			 pmsg->flags & I2C_M_RD ? "read" : "write",
+			 pmsg->len, pmsg->addr, i + 1, num);
+		if (pmsg->flags & I2C_M_RD)
+			ret =
+			    mpc_read(i2c, pmsg->addr, pmsg->buf, pmsg->len, i);
+		else
+			ret =
+			    mpc_write(i2c, pmsg->addr, pmsg->buf, pmsg->len, i);
+	}
+	mpc_i2c_stop(i2c);
+	return (ret < 0) ? ret : num;
+}
+
+static u32 mpc_functionality(struct i2c_adapter *adap)
+{
+	return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
+}
+
+static struct i2c_algorithm mpc_algo = {
+	.name = "MPC algorithm",
+	.id = I2C_ALGO_MPC107,
+	.master_xfer = mpc_xfer,
+	.functionality = mpc_functionality,
+};
+
+static struct i2c_adapter mpc_ops = {
+	.owner = THIS_MODULE,
+	.name = "MPC adapter",
+	.id = I2C_ALGO_MPC107 | I2C_HW_MPC107,
+	.algo = &mpc_algo,
+	.class = I2C_CLASS_HWMON,
+	.timeout = 1,
+	.retries = 1
+};
+
+#ifdef CONFIG_FSL_OCP
+static int __devinit mpc_i2c_probe(struct ocp_device *ocp)
+{
+	int result = 0;
+	struct mpc_i2c *i2c;
+
+	if (!(i2c = kmalloc(sizeof(*i2c), GFP_KERNEL))) {
+		return -ENOMEM;
+	}
+	memset(i2c, 0, sizeof(*i2c));
+
+	i2c->irq = ocp->def->irq;
+	i2c->flags = ((struct ocp_fs_i2c_data *)ocp->def->additions)->flags;
+	init_waitqueue_head(&i2c->queue);
+
+	if (!request_mem_region(ocp->def->paddr, MPC_I2C_REGION, "i2c-mpc")) {
+		printk(KERN_ERR "i2c-mpc - resource unavailable\n");
+		return -ENODEV;
+	}
+
+	i2c->base = ioremap(ocp->def->paddr, MPC_I2C_REGION);
+
+	if (!i2c->base) {
+		printk(KERN_ERR "i2c-mpc - failed to map controller\n");
+		result = -ENOMEM;
+		goto fail_map;
+	}
+
+	if (i2c->irq != OCP_IRQ_NA)
+	{
+		if ((result = request_irq(ocp->def->irq, mpc_i2c_isr,
+					  0, "i2c-mpc", i2c)) < 0) {
+			printk(KERN_ERR
+			       "i2c-mpc - failed to attach interrupt\n");
+			goto fail_irq;
+		}
+	} else
+		i2c->irq = 0;
+
+	i2c->adap = mpc_ops;
+	i2c_set_adapdata(&i2c->adap, i2c);
+
+	if ((result = i2c_add_adapter(&i2c->adap)) < 0) {
+		printk(KERN_ERR "i2c-mpc - failed to add adapter\n");
+		goto fail_add;
+	}
+
+	mpc_i2c_setclock(i2c);
+	ocp_set_drvdata(ocp, i2c);
+	return result;
+
+      fail_add:
+	if (ocp->def->irq != OCP_IRQ_NA)
+		free_irq(ocp->def->irq, 0);
+      fail_irq:
+	iounmap(i2c->base);
+      fail_map:
+	release_mem_region(ocp->def->paddr, MPC_I2C_REGION);
+	kfree(i2c);
+	return result;
+}
+static void __devexit mpc_i2c_remove(struct ocp_device *ocp)
+{
+	struct mpc_i2c *i2c = ocp_get_drvdata(ocp);
+	ocp_set_drvdata(ocp, NULL);
+	i2c_del_adapter(&i2c->adap);
+
+	if (ocp->def->irq != OCP_IRQ_NA)
+		free_irq(i2c->irq, i2c);
+	iounmap(i2c->base);
+	release_mem_region(ocp->def->paddr, MPC_I2C_REGION);
+	kfree(i2c);
+}
+
+static struct ocp_device_id mpc_iic_ids[] __devinitdata = {
+	{.vendor = OCP_VENDOR_FREESCALE,.function = OCP_FUNC_IIC},
+	{.vendor = OCP_VENDOR_INVALID}
+};
+
+MODULE_DEVICE_TABLE(ocp, mpc_iic_ids);
+
+static struct ocp_driver mpc_iic_driver = {
+	.name = "iic",
+	.id_table = mpc_iic_ids,
+	.probe = mpc_i2c_probe,
+	.remove = __devexit_p(mpc_i2c_remove)
+};
+
+static int __init iic_init(void)
+{
+	return ocp_register_driver(&mpc_iic_driver);
+}
+
+static void __exit iic_exit(void)
+{
+	ocp_unregister_driver(&mpc_iic_driver);
+}
+
+module_init(iic_init);
+module_exit(iic_exit);
+#else
+static int fsl_i2c_probe(struct device *device)
+{
+	int result = 0;
+	struct mpc_i2c *i2c;
+	struct platform_device *pdev = to_platform_device(device);
+	struct fsl_i2c_platform_data *pdata;
+	struct resource *r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+
+	pdata = (struct fsl_i2c_platform_data *) pdev->dev.platform_data;
+
+	if (!(i2c = kmalloc(sizeof(*i2c), GFP_KERNEL))) {
+		return -ENOMEM;
+	}
+	memset(i2c, 0, sizeof(*i2c));
+
+	i2c->irq = platform_get_irq(pdev, 0);
+	i2c->flags = pdata->device_flags;
+	init_waitqueue_head(&i2c->queue);
+
+	i2c->base = ioremap((phys_addr_t)r->start, MPC_I2C_REGION);
+
+	if (!i2c->base) {
+		printk(KERN_ERR "i2c-mpc - failed to map controller\n");
+		result = -ENOMEM;
+		goto fail_map;
+	}
+
+	if (i2c->irq != 0)
+		if ((result = request_irq(i2c->irq, mpc_i2c_isr,
+					  0, "fsl-i2c", i2c)) < 0) {
+			printk(KERN_ERR
+			       "i2c-mpc - failed to attach interrupt\n");
+			goto fail_irq;
+		}
+
+	i2c->adap = mpc_ops;
+	i2c_set_adapdata(&i2c->adap, i2c);
+	i2c->adap.dev.parent = &pdev->dev;
+	if ((result = i2c_add_adapter(&i2c->adap)) < 0) {
+		printk(KERN_ERR "i2c-mpc - failed to add adapter\n");
+		goto fail_add;
+	}
+
+	mpc_i2c_setclock(i2c);
+	dev_set_drvdata(device, i2c);
+	return result;
+
+      fail_add:
+	if (i2c->irq != 0)
+		free_irq(i2c->irq, 0);
+      fail_irq:
+	iounmap(i2c->base);
+      fail_map:
+	kfree(i2c);
+	return result;
+};
+
+static int fsl_i2c_remove(struct device *device)
+{
+	struct mpc_i2c *i2c = dev_get_drvdata(device);
+
+	dev_set_drvdata(device, NULL);
+	i2c_del_adapter(&i2c->adap);
+
+	if (i2c->irq != 0)
+		free_irq(i2c->irq, i2c);
+
+	iounmap(i2c->base);
+	kfree(i2c);
+	return 0;
+};
+
+/* Structure for a device driver */
+static struct device_driver fsl_i2c_driver = {
+	.name = "fsl-i2c",
+	.bus = &platform_bus_type,
+	.probe = fsl_i2c_probe,
+	.remove = fsl_i2c_remove,
+};
+
+static int __init fsl_i2c_init(void)
+{
+	return driver_register(&fsl_i2c_driver);
+}
+
+static void __exit fsl_i2c_exit(void)
+{
+	driver_unregister(&fsl_i2c_driver);
+}
+
+module_init(fsl_i2c_init);
+module_exit(fsl_i2c_exit);
+
+#endif /* CONFIG_FSL_OCP */
+
+MODULE_AUTHOR("Adrian Cox <adrian@humboldt.co.uk>");
+MODULE_DESCRIPTION
+    ("I2C-Bus adapter for MPC107 bridge and MPC824x/85xx/52xx processors");
+MODULE_LICENSE("GPL");
diff --git a/drivers/i2c/busses/i2c-mv64xxx.c b/drivers/i2c/busses/i2c-mv64xxx.c
new file mode 100644
index 00000000000..5b852782d2f
--- /dev/null
+++ b/drivers/i2c/busses/i2c-mv64xxx.c
@@ -0,0 +1,598 @@
+/*
+ * drivers/i2c/busses/i2c-mv64xxx.c
+ * 
+ * Driver for the i2c controller on the Marvell line of host bridges for MIPS
+ * and PPC (e.g, gt642[46]0, mv643[46]0, mv644[46]0).
+ *
+ * Author: Mark A. Greer <mgreer@mvista.com>
+ *
+ * 2005 (c) MontaVista, Software, Inc.  This file is licensed under
+ * the terms of the GNU General Public License version 2.  This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/mv643xx.h>
+#include <asm/io.h>
+
+/* Register defines */
+#define	MV64XXX_I2C_REG_SLAVE_ADDR			0x00
+#define	MV64XXX_I2C_REG_DATA				0x04
+#define	MV64XXX_I2C_REG_CONTROL				0x08
+#define	MV64XXX_I2C_REG_STATUS				0x0c
+#define	MV64XXX_I2C_REG_BAUD				0x0c
+#define	MV64XXX_I2C_REG_EXT_SLAVE_ADDR			0x10
+#define	MV64XXX_I2C_REG_SOFT_RESET			0x1c
+
+#define	MV64XXX_I2C_REG_CONTROL_ACK			0x00000004
+#define	MV64XXX_I2C_REG_CONTROL_IFLG			0x00000008
+#define	MV64XXX_I2C_REG_CONTROL_STOP			0x00000010
+#define	MV64XXX_I2C_REG_CONTROL_START			0x00000020
+#define	MV64XXX_I2C_REG_CONTROL_TWSIEN			0x00000040
+#define	MV64XXX_I2C_REG_CONTROL_INTEN			0x00000080
+
+/* Ctlr status values */
+#define	MV64XXX_I2C_STATUS_BUS_ERR			0x00
+#define	MV64XXX_I2C_STATUS_MAST_START			0x08
+#define	MV64XXX_I2C_STATUS_MAST_REPEAT_START		0x10
+#define	MV64XXX_I2C_STATUS_MAST_WR_ADDR_ACK		0x18
+#define	MV64XXX_I2C_STATUS_MAST_WR_ADDR_NO_ACK		0x20
+#define	MV64XXX_I2C_STATUS_MAST_WR_ACK			0x28
+#define	MV64XXX_I2C_STATUS_MAST_WR_NO_ACK		0x30
+#define	MV64XXX_I2C_STATUS_MAST_LOST_ARB		0x38
+#define	MV64XXX_I2C_STATUS_MAST_RD_ADDR_ACK		0x40
+#define	MV64XXX_I2C_STATUS_MAST_RD_ADDR_NO_ACK		0x48
+#define	MV64XXX_I2C_STATUS_MAST_RD_DATA_ACK		0x50
+#define	MV64XXX_I2C_STATUS_MAST_RD_DATA_NO_ACK		0x58
+#define	MV64XXX_I2C_STATUS_MAST_WR_ADDR_2_ACK		0xd0
+#define	MV64XXX_I2C_STATUS_MAST_WR_ADDR_2_NO_ACK	0xd8
+#define	MV64XXX_I2C_STATUS_MAST_RD_ADDR_2_ACK		0xe0
+#define	MV64XXX_I2C_STATUS_MAST_RD_ADDR_2_NO_ACK	0xe8
+#define	MV64XXX_I2C_STATUS_NO_STATUS			0xf8
+
+/* Driver states */
+enum {
+	MV64XXX_I2C_STATE_INVALID,
+	MV64XXX_I2C_STATE_IDLE,
+	MV64XXX_I2C_STATE_WAITING_FOR_START_COND,
+	MV64XXX_I2C_STATE_WAITING_FOR_ADDR_1_ACK,
+	MV64XXX_I2C_STATE_WAITING_FOR_ADDR_2_ACK,
+	MV64XXX_I2C_STATE_WAITING_FOR_SLAVE_ACK,
+	MV64XXX_I2C_STATE_WAITING_FOR_SLAVE_DATA,
+	MV64XXX_I2C_STATE_ABORTING,
+};
+
+/* Driver actions */
+enum {
+	MV64XXX_I2C_ACTION_INVALID,
+	MV64XXX_I2C_ACTION_CONTINUE,
+	MV64XXX_I2C_ACTION_SEND_START,
+	MV64XXX_I2C_ACTION_SEND_ADDR_1,
+	MV64XXX_I2C_ACTION_SEND_ADDR_2,
+	MV64XXX_I2C_ACTION_SEND_DATA,
+	MV64XXX_I2C_ACTION_RCV_DATA,
+	MV64XXX_I2C_ACTION_RCV_DATA_STOP,
+	MV64XXX_I2C_ACTION_SEND_STOP,
+};
+
+struct mv64xxx_i2c_data {
+	int			irq;
+	u32			state;
+	u32			action;
+	u32			cntl_bits;
+	void __iomem		*reg_base;
+	u32			reg_base_p;
+	u32			addr1;
+	u32			addr2;
+	u32			bytes_left;
+	u32			byte_posn;
+	u32			block;
+	int			rc;
+	u32			freq_m;
+	u32			freq_n;
+	wait_queue_head_t	waitq;
+	spinlock_t		lock;
+	struct i2c_msg		*msg;
+	struct i2c_adapter	adapter;
+};
+
+/*
+ *****************************************************************************
+ *
+ *	Finite State Machine & Interrupt Routines
+ *
+ *****************************************************************************
+ */
+static void
+mv64xxx_i2c_fsm(struct mv64xxx_i2c_data *drv_data, u32 status)
+{
+	/*
+	 * If state is idle, then this is likely the remnants of an old
+	 * operation that driver has given up on or the user has killed.
+	 * If so, issue the stop condition and go to idle.
+	 */
+	if (drv_data->state == MV64XXX_I2C_STATE_IDLE) {
+		drv_data->action = MV64XXX_I2C_ACTION_SEND_STOP;
+		return;
+	}
+
+	if (drv_data->state == MV64XXX_I2C_STATE_ABORTING) {
+		drv_data->action = MV64XXX_I2C_ACTION_SEND_STOP;
+		drv_data->state = MV64XXX_I2C_STATE_IDLE;
+		return;
+	}
+
+	/* The status from the ctlr [mostly] tells us what to do next */
+	switch (status) {
+	/* Start condition interrupt */
+	case MV64XXX_I2C_STATUS_MAST_START: /* 0x08 */
+	case MV64XXX_I2C_STATUS_MAST_REPEAT_START: /* 0x10 */
+		drv_data->action = MV64XXX_I2C_ACTION_SEND_ADDR_1;
+		drv_data->state = MV64XXX_I2C_STATE_WAITING_FOR_ADDR_1_ACK;
+		break;
+
+	/* Performing a write */
+	case MV64XXX_I2C_STATUS_MAST_WR_ADDR_ACK: /* 0x18 */
+		if (drv_data->msg->flags & I2C_M_TEN) {
+			drv_data->action = MV64XXX_I2C_ACTION_SEND_ADDR_2;
+			drv_data->state =
+				MV64XXX_I2C_STATE_WAITING_FOR_ADDR_2_ACK;
+			break;
+		}
+		/* FALLTHRU */
+	case MV64XXX_I2C_STATUS_MAST_WR_ADDR_2_ACK: /* 0xd0 */
+	case MV64XXX_I2C_STATUS_MAST_WR_ACK: /* 0x28 */
+		if (drv_data->bytes_left > 0) {
+			drv_data->action = MV64XXX_I2C_ACTION_SEND_DATA;
+			drv_data->state =
+				MV64XXX_I2C_STATE_WAITING_FOR_SLAVE_ACK;
+			drv_data->bytes_left--;
+		} else {
+			drv_data->action = MV64XXX_I2C_ACTION_SEND_STOP;
+			drv_data->state = MV64XXX_I2C_STATE_IDLE;
+		}
+		break;
+
+	/* Performing a read */
+	case MV64XXX_I2C_STATUS_MAST_RD_ADDR_ACK: /* 40 */
+		if (drv_data->msg->flags & I2C_M_TEN) {
+			drv_data->action = MV64XXX_I2C_ACTION_SEND_ADDR_2;
+			drv_data->state =
+				MV64XXX_I2C_STATE_WAITING_FOR_ADDR_2_ACK;
+			break;
+		}
+		/* FALLTHRU */
+	case MV64XXX_I2C_STATUS_MAST_RD_ADDR_2_ACK: /* 0xe0 */
+		if (drv_data->bytes_left == 0) {
+			drv_data->action = MV64XXX_I2C_ACTION_SEND_STOP;
+			drv_data->state = MV64XXX_I2C_STATE_IDLE;
+			break;
+		}
+		/* FALLTHRU */
+	case MV64XXX_I2C_STATUS_MAST_RD_DATA_ACK: /* 0x50 */
+		if (status != MV64XXX_I2C_STATUS_MAST_RD_DATA_ACK)
+			drv_data->action = MV64XXX_I2C_ACTION_CONTINUE;
+		else {
+			drv_data->action = MV64XXX_I2C_ACTION_RCV_DATA;
+			drv_data->bytes_left--;
+		}
+		drv_data->state = MV64XXX_I2C_STATE_WAITING_FOR_SLAVE_DATA;
+
+		if (drv_data->bytes_left == 1)
+			drv_data->cntl_bits &= ~MV64XXX_I2C_REG_CONTROL_ACK;
+		break;
+
+	case MV64XXX_I2C_STATUS_MAST_RD_DATA_NO_ACK: /* 0x58 */
+		drv_data->action = MV64XXX_I2C_ACTION_RCV_DATA_STOP;
+		drv_data->state = MV64XXX_I2C_STATE_IDLE;
+		break;
+
+	case MV64XXX_I2C_STATUS_MAST_WR_ADDR_NO_ACK: /* 0x20 */
+	case MV64XXX_I2C_STATUS_MAST_WR_NO_ACK: /* 30 */
+	case MV64XXX_I2C_STATUS_MAST_RD_ADDR_NO_ACK: /* 48 */
+		/* Doesn't seem to be a device at other end */
+		drv_data->action = MV64XXX_I2C_ACTION_SEND_STOP;
+		drv_data->state = MV64XXX_I2C_STATE_IDLE;
+		drv_data->rc = -ENODEV;
+		break;
+
+	default:
+		dev_err(&drv_data->adapter.dev,
+			"mv64xxx_i2c_fsm: Ctlr Error -- state: 0x%x, "
+			"status: 0x%x, addr: 0x%x, flags: 0x%x\n",
+			 drv_data->state, status, drv_data->msg->addr,
+			 drv_data->msg->flags);
+		drv_data->action = MV64XXX_I2C_ACTION_SEND_STOP;
+		drv_data->state = MV64XXX_I2C_STATE_IDLE;
+		drv_data->rc = -EIO;
+	}
+}
+
+static void
+mv64xxx_i2c_do_action(struct mv64xxx_i2c_data *drv_data)
+{
+	switch(drv_data->action) {
+	case MV64XXX_I2C_ACTION_CONTINUE:
+		writel(drv_data->cntl_bits,
+			drv_data->reg_base + MV64XXX_I2C_REG_CONTROL);
+		break;
+
+	case MV64XXX_I2C_ACTION_SEND_START:
+		writel(drv_data->cntl_bits | MV64XXX_I2C_REG_CONTROL_START,
+			drv_data->reg_base + MV64XXX_I2C_REG_CONTROL);
+		break;
+
+	case MV64XXX_I2C_ACTION_SEND_ADDR_1:
+		writel(drv_data->addr1,
+			drv_data->reg_base + MV64XXX_I2C_REG_DATA);
+		writel(drv_data->cntl_bits,
+			drv_data->reg_base + MV64XXX_I2C_REG_CONTROL);
+		break;
+
+	case MV64XXX_I2C_ACTION_SEND_ADDR_2:
+		writel(drv_data->addr2,
+			drv_data->reg_base + MV64XXX_I2C_REG_DATA);
+		writel(drv_data->cntl_bits,
+			drv_data->reg_base + MV64XXX_I2C_REG_CONTROL);
+		break;
+
+	case MV64XXX_I2C_ACTION_SEND_DATA:
+		writel(drv_data->msg->buf[drv_data->byte_posn++],
+			drv_data->reg_base + MV64XXX_I2C_REG_DATA);
+		writel(drv_data->cntl_bits,
+			drv_data->reg_base + MV64XXX_I2C_REG_CONTROL);
+		break;
+
+	case MV64XXX_I2C_ACTION_RCV_DATA:
+		drv_data->msg->buf[drv_data->byte_posn++] =
+			readl(drv_data->reg_base + MV64XXX_I2C_REG_DATA);
+		writel(drv_data->cntl_bits,
+			drv_data->reg_base + MV64XXX_I2C_REG_CONTROL);
+		break;
+
+	case MV64XXX_I2C_ACTION_RCV_DATA_STOP:
+		drv_data->msg->buf[drv_data->byte_posn++] =
+			readl(drv_data->reg_base + MV64XXX_I2C_REG_DATA);
+		drv_data->cntl_bits &= ~MV64XXX_I2C_REG_CONTROL_INTEN;
+		writel(drv_data->cntl_bits | MV64XXX_I2C_REG_CONTROL_STOP,
+			drv_data->reg_base + MV64XXX_I2C_REG_CONTROL);
+		drv_data->block = 0;
+		wake_up_interruptible(&drv_data->waitq);
+		break;
+
+	case MV64XXX_I2C_ACTION_INVALID:
+	default:
+		dev_err(&drv_data->adapter.dev,
+			"mv64xxx_i2c_do_action: Invalid action: %d\n",
+			drv_data->action);
+		drv_data->rc = -EIO;
+		/* FALLTHRU */
+	case MV64XXX_I2C_ACTION_SEND_STOP:
+		drv_data->cntl_bits &= ~MV64XXX_I2C_REG_CONTROL_INTEN;
+		writel(drv_data->cntl_bits | MV64XXX_I2C_REG_CONTROL_STOP,
+			drv_data->reg_base + MV64XXX_I2C_REG_CONTROL);
+		drv_data->block = 0;
+		wake_up_interruptible(&drv_data->waitq);
+		break;
+	}
+}
+
+static int
+mv64xxx_i2c_intr(int irq, void *dev_id, struct pt_regs *regs)
+{
+	struct mv64xxx_i2c_data	*drv_data = dev_id;
+	unsigned long	flags;
+	u32		status;
+	int		rc = IRQ_NONE;
+
+	spin_lock_irqsave(&drv_data->lock, flags);
+	while (readl(drv_data->reg_base + MV64XXX_I2C_REG_CONTROL) &
+						MV64XXX_I2C_REG_CONTROL_IFLG) {
+		status = readl(drv_data->reg_base + MV64XXX_I2C_REG_STATUS);
+		mv64xxx_i2c_fsm(drv_data, status);
+		mv64xxx_i2c_do_action(drv_data);
+		rc = IRQ_HANDLED;
+	}
+	spin_unlock_irqrestore(&drv_data->lock, flags);
+
+	return rc;
+}
+
+/*
+ *****************************************************************************
+ *
+ *	I2C Msg Execution Routines
+ *
+ *****************************************************************************
+ */
+static void
+mv64xxx_i2c_prepare_for_io(struct mv64xxx_i2c_data *drv_data,
+	struct i2c_msg *msg)
+{
+	u32	dir = 0;
+
+	drv_data->msg = msg;
+	drv_data->byte_posn = 0;
+	drv_data->bytes_left = msg->len;
+	drv_data->rc = 0;
+	drv_data->cntl_bits = MV64XXX_I2C_REG_CONTROL_ACK |
+		MV64XXX_I2C_REG_CONTROL_INTEN | MV64XXX_I2C_REG_CONTROL_TWSIEN;
+
+	if (msg->flags & I2C_M_RD)
+		dir = 1;
+
+	if (msg->flags & I2C_M_REV_DIR_ADDR)
+		dir ^= 1;
+
+	if (msg->flags & I2C_M_TEN) {
+		drv_data->addr1 = 0xf0 | (((u32)msg->addr & 0x300) >> 7) | dir;
+		drv_data->addr2 = (u32)msg->addr & 0xff;
+	} else {
+		drv_data->addr1 = ((u32)msg->addr & 0x7f) << 1 | dir;
+		drv_data->addr2 = 0;
+	}
+}
+
+static void
+mv64xxx_i2c_wait_for_completion(struct mv64xxx_i2c_data *drv_data)
+{
+	long		time_left;
+	unsigned long	flags;
+	char		abort = 0;
+
+	time_left = wait_event_interruptible_timeout(drv_data->waitq,
+		!drv_data->block, msecs_to_jiffies(drv_data->adapter.timeout));
+
+	spin_lock_irqsave(&drv_data->lock, flags);
+	if (!time_left) { /* Timed out */
+		drv_data->rc = -ETIMEDOUT;
+		abort = 1;
+	} else if (time_left < 0) { /* Interrupted/Error */
+		drv_data->rc = time_left; /* errno value */
+		abort = 1;
+	}
+
+	if (abort && drv_data->block) {
+		drv_data->state = MV64XXX_I2C_STATE_ABORTING;
+		spin_unlock_irqrestore(&drv_data->lock, flags);
+
+		time_left = wait_event_timeout(drv_data->waitq,
+			!drv_data->block,
+			msecs_to_jiffies(drv_data->adapter.timeout));
+
+		if (time_left <= 0) {
+			drv_data->state = MV64XXX_I2C_STATE_IDLE;
+			dev_err(&drv_data->adapter.dev,
+				"mv64xxx: I2C bus locked\n");
+		}
+	} else
+		spin_unlock_irqrestore(&drv_data->lock, flags);
+}
+
+static int
+mv64xxx_i2c_execute_msg(struct mv64xxx_i2c_data *drv_data, struct i2c_msg *msg)
+{
+	unsigned long	flags;
+
+	spin_lock_irqsave(&drv_data->lock, flags);
+	mv64xxx_i2c_prepare_for_io(drv_data, msg);
+
+	if (unlikely(msg->flags & I2C_M_NOSTART)) { /* Skip start/addr phases */
+		if (drv_data->msg->flags & I2C_M_RD) {
+			/* No action to do, wait for slave to send a byte */
+			drv_data->action = MV64XXX_I2C_ACTION_CONTINUE;
+			drv_data->state =
+				MV64XXX_I2C_STATE_WAITING_FOR_SLAVE_DATA;
+		} else {
+			drv_data->action = MV64XXX_I2C_ACTION_SEND_DATA;
+			drv_data->state =
+				MV64XXX_I2C_STATE_WAITING_FOR_SLAVE_ACK;
+			drv_data->bytes_left--;
+		}
+	} else {
+		drv_data->action = MV64XXX_I2C_ACTION_SEND_START;
+		drv_data->state = MV64XXX_I2C_STATE_WAITING_FOR_START_COND;
+	}
+
+	drv_data->block = 1;
+	mv64xxx_i2c_do_action(drv_data);
+	spin_unlock_irqrestore(&drv_data->lock, flags);
+
+	mv64xxx_i2c_wait_for_completion(drv_data);
+	return drv_data->rc;
+}
+
+/*
+ *****************************************************************************
+ *
+ *	I2C Core Support Routines (Interface to higher level I2C code)
+ *
+ *****************************************************************************
+ */
+static u32
+mv64xxx_i2c_functionality(struct i2c_adapter *adap)
+{
+	return I2C_FUNC_I2C | I2C_FUNC_10BIT_ADDR | I2C_FUNC_SMBUS_EMUL;
+}
+
+static int
+mv64xxx_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
+{
+	struct mv64xxx_i2c_data *drv_data = i2c_get_adapdata(adap);
+	int	i, rc = 0;
+
+	for (i=0; i<num; i++)
+		if ((rc = mv64xxx_i2c_execute_msg(drv_data, &msgs[i])) != 0)
+			break;
+
+	return rc;
+}
+
+static struct i2c_algorithm mv64xxx_i2c_algo = {
+	.name = MV64XXX_I2C_CTLR_NAME " algorithm",
+	.id = I2C_ALGO_MV64XXX,
+	.master_xfer = mv64xxx_i2c_xfer,
+	.functionality = mv64xxx_i2c_functionality,
+};
+
+/*
+ *****************************************************************************
+ *
+ *	Driver Interface & Early Init Routines
+ *
+ *****************************************************************************
+ */
+static void __devinit
+mv64xxx_i2c_hw_init(struct mv64xxx_i2c_data *drv_data)
+{
+	writel(0, drv_data->reg_base + MV64XXX_I2C_REG_SOFT_RESET);
+	writel((((drv_data->freq_m & 0xf) << 3) | (drv_data->freq_n & 0x7)),
+		drv_data->reg_base + MV64XXX_I2C_REG_BAUD);
+	writel(0, drv_data->reg_base + MV64XXX_I2C_REG_SLAVE_ADDR);
+	writel(0, drv_data->reg_base + MV64XXX_I2C_REG_EXT_SLAVE_ADDR);
+	writel(MV64XXX_I2C_REG_CONTROL_TWSIEN | MV64XXX_I2C_REG_CONTROL_STOP,
+		drv_data->reg_base + MV64XXX_I2C_REG_CONTROL);
+	drv_data->state = MV64XXX_I2C_STATE_IDLE;
+}
+
+static int __devinit
+mv64xxx_i2c_map_regs(struct platform_device *pd,
+	struct mv64xxx_i2c_data *drv_data)
+{
+	struct resource	*r;
+
+	if ((r = platform_get_resource(pd, IORESOURCE_MEM, 0)) &&
+		request_mem_region(r->start, MV64XXX_I2C_REG_BLOCK_SIZE,
+			drv_data->adapter.name)) {
+
+		drv_data->reg_base = ioremap(r->start,
+			MV64XXX_I2C_REG_BLOCK_SIZE);
+		drv_data->reg_base_p = r->start;
+	} else
+		return -ENOMEM;
+
+	return 0;
+}
+
+static void __devexit
+mv64xxx_i2c_unmap_regs(struct mv64xxx_i2c_data *drv_data)
+{
+	if (drv_data->reg_base) {
+		iounmap(drv_data->reg_base);
+		release_mem_region(drv_data->reg_base_p,
+			MV64XXX_I2C_REG_BLOCK_SIZE);
+	}
+
+	drv_data->reg_base = NULL;
+	drv_data->reg_base_p = 0;
+}
+
+static int __devinit
+mv64xxx_i2c_probe(struct device *dev)
+{
+	struct platform_device		*pd = to_platform_device(dev);
+	struct mv64xxx_i2c_data		*drv_data;
+	struct mv64xxx_i2c_pdata	*pdata = dev->platform_data;
+	int	rc;
+
+	if ((pd->id != 0) || !pdata)
+		return -ENODEV;
+
+	drv_data = kmalloc(sizeof(struct mv64xxx_i2c_data), GFP_KERNEL);
+
+	if (!drv_data)
+		return -ENOMEM;
+
+	memset(drv_data, 0, sizeof(struct mv64xxx_i2c_data));
+
+	if (mv64xxx_i2c_map_regs(pd, drv_data)) {
+		rc = -ENODEV;
+		goto exit_kfree;
+	}
+
+	strncpy(drv_data->adapter.name, MV64XXX_I2C_CTLR_NAME " adapter",
+		I2C_NAME_SIZE);
+
+	init_waitqueue_head(&drv_data->waitq);
+	spin_lock_init(&drv_data->lock);
+
+	drv_data->freq_m = pdata->freq_m;
+	drv_data->freq_n = pdata->freq_n;
+	drv_data->irq = platform_get_irq(pd, 0);
+	drv_data->adapter.id = I2C_ALGO_MV64XXX | I2C_HW_MV64XXX;
+	drv_data->adapter.algo = &mv64xxx_i2c_algo;
+	drv_data->adapter.owner = THIS_MODULE;
+	drv_data->adapter.class = I2C_CLASS_HWMON;
+	drv_data->adapter.timeout = pdata->timeout;
+	drv_data->adapter.retries = pdata->retries;
+	dev_set_drvdata(dev, drv_data);
+	i2c_set_adapdata(&drv_data->adapter, drv_data);
+
+	if (request_irq(drv_data->irq, mv64xxx_i2c_intr, 0,
+		MV64XXX_I2C_CTLR_NAME, drv_data)) {
+
+		dev_err(dev, "mv64xxx: Can't register intr handler "
+			"irq: %d\n", drv_data->irq);
+		rc = -EINVAL;
+		goto exit_unmap_regs;
+	} else if ((rc = i2c_add_adapter(&drv_data->adapter)) != 0) {
+		dev_err(dev, "mv64xxx: Can't add i2c adapter, rc: %d\n", -rc);
+		goto exit_free_irq;
+	}
+
+	mv64xxx_i2c_hw_init(drv_data);
+
+	return 0;
+
+	exit_free_irq:
+		free_irq(drv_data->irq, drv_data);
+	exit_unmap_regs:
+		mv64xxx_i2c_unmap_regs(drv_data);
+	exit_kfree:
+		kfree(drv_data);
+	return rc;
+}
+
+static int __devexit
+mv64xxx_i2c_remove(struct device *dev)
+{
+	struct mv64xxx_i2c_data		*drv_data = dev_get_drvdata(dev);
+	int	rc;
+
+	rc = i2c_del_adapter(&drv_data->adapter);
+	free_irq(drv_data->irq, drv_data);
+	mv64xxx_i2c_unmap_regs(drv_data);
+	kfree(drv_data);
+
+	return rc;
+}
+
+static struct device_driver mv64xxx_i2c_driver = {
+	.name	= MV64XXX_I2C_CTLR_NAME,
+	.bus	= &platform_bus_type,
+	.probe	= mv64xxx_i2c_probe,
+	.remove	= mv64xxx_i2c_remove,
+};
+
+static int __init
+mv64xxx_i2c_init(void)
+{
+	return driver_register(&mv64xxx_i2c_driver);
+}
+
+static void __exit
+mv64xxx_i2c_exit(void)
+{
+	driver_unregister(&mv64xxx_i2c_driver);
+}
+
+module_init(mv64xxx_i2c_init);
+module_exit(mv64xxx_i2c_exit);
+
+MODULE_AUTHOR("Mark A. Greer <mgreer@mvista.com>");
+MODULE_DESCRIPTION("Marvell mv64xxx host bridge i2c ctlr driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/i2c/busses/i2c-nforce2.c b/drivers/i2c/busses/i2c-nforce2.c
new file mode 100644
index 00000000000..6d13127c8c4
--- /dev/null
+++ b/drivers/i2c/busses/i2c-nforce2.c
@@ -0,0 +1,410 @@
+/*
+    SMBus driver for nVidia nForce2 MCP
+
+    Added nForce3 Pro 150  Thomas Leibold <thomas@plx.com>,
+	Ported to 2.5 Patrick Dreker <patrick@dreker.de>,
+    Copyright (c) 2003  Hans-Frieder Vogt <hfvogt@arcor.de>,
+    Based on
+    SMBus 2.0 driver for AMD-8111 IO-Hub
+    Copyright (c) 2002 Vojtech Pavlik
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+/*
+    SUPPORTED DEVICES		PCI ID
+    nForce2 MCP			0064
+    nForce2 Ultra 400 MCP	0084
+    nForce3 Pro150 MCP		00D4
+    nForce3 250Gb MCP		00E4
+    nForce4 MCP			0052
+
+    This driver supports the 2 SMBuses that are included in the MCP of the
+    nForce2/3/4 chipsets.
+*/
+
+/* Note: we assume there can only be one nForce2, with two SMBus interfaces */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/stddef.h>
+#include <linux/sched.h>
+#include <linux/ioport.h>
+#include <linux/init.h>
+#include <linux/i2c.h>
+#include <linux/delay.h>
+#include <asm/io.h>
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR ("Hans-Frieder Vogt <hfvogt@arcor.de>");
+MODULE_DESCRIPTION("nForce2 SMBus driver");
+
+
+struct nforce2_smbus {
+	struct pci_dev *dev;
+	struct i2c_adapter adapter;
+	int base;
+	int size;
+};
+
+
+/*
+ * nVidia nForce2 SMBus control register definitions
+ */
+#define NFORCE_PCI_SMB1	0x50
+#define NFORCE_PCI_SMB2	0x54
+
+
+/*
+ * ACPI 2.0 chapter 13 SMBus 2.0 EC register model
+ */
+#define NVIDIA_SMB_PRTCL	(smbus->base + 0x00)	/* protocol, PEC */
+#define NVIDIA_SMB_STS		(smbus->base + 0x01)	/* status */
+#define NVIDIA_SMB_ADDR		(smbus->base + 0x02)	/* address */
+#define NVIDIA_SMB_CMD		(smbus->base + 0x03)	/* command */
+#define NVIDIA_SMB_DATA		(smbus->base + 0x04)	/* 32 data registers */
+#define NVIDIA_SMB_BCNT		(smbus->base + 0x24)	/* number of data bytes */
+#define NVIDIA_SMB_ALRM_A	(smbus->base + 0x25)	/* alarm address */
+#define NVIDIA_SMB_ALRM_D	(smbus->base + 0x26)	/* 2 bytes alarm data */
+
+#define NVIDIA_SMB_STS_DONE	0x80
+#define NVIDIA_SMB_STS_ALRM	0x40
+#define NVIDIA_SMB_STS_RES	0x20
+#define NVIDIA_SMB_STS_STATUS	0x1f
+
+#define NVIDIA_SMB_PRTCL_WRITE			0x00
+#define NVIDIA_SMB_PRTCL_READ			0x01
+#define NVIDIA_SMB_PRTCL_QUICK			0x02
+#define NVIDIA_SMB_PRTCL_BYTE			0x04
+#define NVIDIA_SMB_PRTCL_BYTE_DATA		0x06
+#define NVIDIA_SMB_PRTCL_WORD_DATA		0x08
+#define NVIDIA_SMB_PRTCL_BLOCK_DATA		0x0a
+#define NVIDIA_SMB_PRTCL_PROC_CALL		0x0c
+#define NVIDIA_SMB_PRTCL_BLOCK_PROC_CALL	0x0d
+#define NVIDIA_SMB_PRTCL_I2C_BLOCK_DATA		0x4a
+#define NVIDIA_SMB_PRTCL_PEC			0x80
+
+
+/* Other settings */
+#define MAX_TIMEOUT 256
+
+
+
+static s32 nforce2_access(struct i2c_adapter *adap, u16 addr,
+		       unsigned short flags, char read_write,
+		       u8 command, int size, union i2c_smbus_data *data);
+static u32 nforce2_func(struct i2c_adapter *adapter);
+
+
+static struct i2c_algorithm smbus_algorithm = {
+	.name = "Non-I2C SMBus adapter",
+	.id = I2C_ALGO_SMBUS,
+	.smbus_xfer = nforce2_access,
+	.functionality = nforce2_func,
+};
+
+static struct i2c_adapter nforce2_adapter = {
+	.owner          = THIS_MODULE,
+	.class          = I2C_CLASS_HWMON,
+	.algo           = &smbus_algorithm,
+	.name   	= "unset",
+};
+
+/* Return -1 on error. See smbus.h for more information */
+static s32 nforce2_access(struct i2c_adapter * adap, u16 addr,
+		unsigned short flags, char read_write,
+		u8 command, int size, union i2c_smbus_data * data)
+{
+	struct nforce2_smbus *smbus = adap->algo_data;
+	unsigned char protocol, pec, temp;
+	unsigned char len = 0; /* to keep the compiler quiet */
+	int timeout = 0;
+	int i;
+
+	protocol = (read_write == I2C_SMBUS_READ) ? NVIDIA_SMB_PRTCL_READ :
+		NVIDIA_SMB_PRTCL_WRITE;
+	pec = (flags & I2C_CLIENT_PEC) ? NVIDIA_SMB_PRTCL_PEC : 0;
+
+	switch (size) {
+
+		case I2C_SMBUS_QUICK:
+			protocol |= NVIDIA_SMB_PRTCL_QUICK;
+			read_write = I2C_SMBUS_WRITE;
+			break;
+
+		case I2C_SMBUS_BYTE:
+			if (read_write == I2C_SMBUS_WRITE)
+				outb_p(command, NVIDIA_SMB_CMD);
+			protocol |= NVIDIA_SMB_PRTCL_BYTE;
+			break;
+
+		case I2C_SMBUS_BYTE_DATA:
+			outb_p(command, NVIDIA_SMB_CMD);
+			if (read_write == I2C_SMBUS_WRITE)
+				outb_p(data->byte, NVIDIA_SMB_DATA);
+			protocol |= NVIDIA_SMB_PRTCL_BYTE_DATA;
+			break;
+
+		case I2C_SMBUS_WORD_DATA:
+			outb_p(command, NVIDIA_SMB_CMD);
+			if (read_write == I2C_SMBUS_WRITE) {
+				 outb_p(data->word, NVIDIA_SMB_DATA);
+				 outb_p(data->word >> 8, NVIDIA_SMB_DATA+1);
+			}
+			protocol |= NVIDIA_SMB_PRTCL_WORD_DATA | pec;
+			break;
+
+		case I2C_SMBUS_BLOCK_DATA:
+			outb_p(command, NVIDIA_SMB_CMD);
+			if (read_write == I2C_SMBUS_WRITE) {
+				len = min_t(u8, data->block[0], 32);
+				outb_p(len, NVIDIA_SMB_BCNT);
+				for (i = 0; i < len; i++)
+					outb_p(data->block[i + 1], NVIDIA_SMB_DATA+i);
+			}
+			protocol |= NVIDIA_SMB_PRTCL_BLOCK_DATA | pec;
+			break;
+
+		case I2C_SMBUS_I2C_BLOCK_DATA:
+			len = min_t(u8, data->block[0], 32);
+			outb_p(command, NVIDIA_SMB_CMD);
+			outb_p(len, NVIDIA_SMB_BCNT);
+			if (read_write == I2C_SMBUS_WRITE)
+				for (i = 0; i < len; i++)
+					outb_p(data->block[i + 1], NVIDIA_SMB_DATA+i);
+			protocol |= NVIDIA_SMB_PRTCL_I2C_BLOCK_DATA;
+			break;
+
+		case I2C_SMBUS_PROC_CALL:
+			dev_err(&adap->dev, "I2C_SMBUS_PROC_CALL not supported!\n");
+			return -1;
+			/*
+			outb_p(command, NVIDIA_SMB_CMD);
+			outb_p(data->word, NVIDIA_SMB_DATA);
+			outb_p(data->word >> 8, NVIDIA_SMB_DATA + 1);
+			protocol = NVIDIA_SMB_PRTCL_PROC_CALL | pec;
+			read_write = I2C_SMBUS_READ;
+			break;
+			 */
+
+		case I2C_SMBUS_BLOCK_PROC_CALL:
+			dev_err(&adap->dev, "I2C_SMBUS_BLOCK_PROC_CALL not supported!\n");
+			return -1;
+			/*
+			protocol |= pec;
+			len = min_t(u8, data->block[0], 31);
+			outb_p(command, NVIDIA_SMB_CMD);
+			outb_p(len, NVIDIA_SMB_BCNT);
+			for (i = 0; i < len; i++)
+				outb_p(data->block[i + 1], NVIDIA_SMB_DATA + i);
+			protocol = NVIDIA_SMB_PRTCL_BLOCK_PROC_CALL | pec;
+			read_write = I2C_SMBUS_READ;
+			break;
+			*/
+
+		case I2C_SMBUS_WORD_DATA_PEC:
+		case I2C_SMBUS_BLOCK_DATA_PEC:
+		case I2C_SMBUS_PROC_CALL_PEC:
+		case I2C_SMBUS_BLOCK_PROC_CALL_PEC:
+			dev_err(&adap->dev, "Unexpected software PEC transaction %d\n.", size);
+			return -1;
+
+		default:
+			dev_err(&adap->dev, "Unsupported transaction %d\n", size);
+			return -1;
+	}
+
+	outb_p((addr & 0x7f) << 1, NVIDIA_SMB_ADDR);
+	outb_p(protocol, NVIDIA_SMB_PRTCL);
+
+	temp = inb_p(NVIDIA_SMB_STS);
+
+#if 0
+	do {
+		i2c_do_pause(1);
+		temp = inb_p(NVIDIA_SMB_STS);
+	} while (((temp & NVIDIA_SMB_STS_DONE) == 0) && (timeout++ < MAX_TIMEOUT));
+#endif
+	if (~temp & NVIDIA_SMB_STS_DONE) {
+		udelay(500);
+		temp = inb_p(NVIDIA_SMB_STS);
+	}
+	if (~temp & NVIDIA_SMB_STS_DONE) {
+		msleep(10);
+		temp = inb_p(NVIDIA_SMB_STS);
+	}
+
+	if ((timeout >= MAX_TIMEOUT) || (~temp & NVIDIA_SMB_STS_DONE)
+		|| (temp & NVIDIA_SMB_STS_STATUS))
+		return -1;
+
+	if (read_write == I2C_SMBUS_WRITE)
+		return 0;
+
+	switch (size) {
+
+		case I2C_SMBUS_BYTE:
+		case I2C_SMBUS_BYTE_DATA:
+			data->byte = inb_p(NVIDIA_SMB_DATA);
+			break;
+
+		case I2C_SMBUS_WORD_DATA:
+		/* case I2C_SMBUS_PROC_CALL: not supported */
+			data->word = inb_p(NVIDIA_SMB_DATA) | (inb_p(NVIDIA_SMB_DATA+1) << 8);
+			break;
+
+		case I2C_SMBUS_BLOCK_DATA:
+		/* case I2C_SMBUS_BLOCK_PROC_CALL: not supported */
+			len = inb_p(NVIDIA_SMB_BCNT);
+			len = min_t(u8, len, 32);
+		case I2C_SMBUS_I2C_BLOCK_DATA:
+			for (i = 0; i < len; i++)
+				data->block[i+1] = inb_p(NVIDIA_SMB_DATA + i);
+			data->block[0] = len;
+			break;
+	}
+
+	return 0;
+}
+
+
+static u32 nforce2_func(struct i2c_adapter *adapter)
+{
+	/* other functionality might be possible, but is not tested */
+	return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE |
+	    I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA /* |
+	    I2C_FUNC_SMBUS_BLOCK_DATA */;
+}
+
+
+static struct pci_device_id nforce2_ids[] = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE2_SMBUS) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE2S_SMBUS) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE3_SMBUS) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE3S_SMBUS) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE4_SMBUS) },
+	{ 0 }
+};
+
+
+MODULE_DEVICE_TABLE (pci, nforce2_ids);
+
+
+static int __devinit nforce2_probe_smb (struct pci_dev *dev, int reg,
+	struct nforce2_smbus *smbus, char *name)
+{
+	u16 iobase;
+	int error;
+
+	if (pci_read_config_word(dev, reg, &iobase) != PCIBIOS_SUCCESSFUL) {
+		dev_err(&smbus->adapter.dev, "Error reading PCI config for %s\n", name);
+		return -1;
+	}
+	smbus->dev  = dev;
+	smbus->base = iobase & 0xfffc;
+	smbus->size = 8;
+
+	if (!request_region(smbus->base, smbus->size, "nForce2 SMBus")) {
+		dev_err(&smbus->adapter.dev, "Error requesting region %02x .. %02X for %s\n",
+			smbus->base, smbus->base+smbus->size-1, name);
+		return -1;
+	}
+	smbus->adapter = nforce2_adapter;
+	smbus->adapter.algo_data = smbus;
+	smbus->adapter.dev.parent = &dev->dev;
+	snprintf(smbus->adapter.name, I2C_NAME_SIZE,
+		"SMBus nForce2 adapter at %04x", smbus->base);
+
+	error = i2c_add_adapter(&smbus->adapter);
+	if (error) {
+		dev_err(&smbus->adapter.dev, "Failed to register adapter.\n");
+		release_region(smbus->base, smbus->size);
+		return -1;
+	}
+	dev_info(&smbus->adapter.dev, "nForce2 SMBus adapter at %#x\n", smbus->base);
+	return 0;
+}
+
+
+static int __devinit nforce2_probe(struct pci_dev *dev, const struct pci_device_id *id)
+{
+	struct nforce2_smbus *smbuses;
+	int res1, res2;
+
+	/* we support 2 SMBus adapters */
+	if (!(smbuses = (void *)kmalloc(2*sizeof(struct nforce2_smbus),
+				       	GFP_KERNEL)))
+		return -ENOMEM;
+	memset (smbuses, 0, 2*sizeof(struct nforce2_smbus));
+	pci_set_drvdata(dev, smbuses);
+
+	/* SMBus adapter 1 */
+	res1 = nforce2_probe_smb (dev, NFORCE_PCI_SMB1, &smbuses[0], "SMB1");
+	if (res1 < 0) {
+		dev_err(&dev->dev, "Error probing SMB1.\n");
+		smbuses[0].base = 0;	/* to have a check value */
+	}
+	res2 = nforce2_probe_smb (dev, NFORCE_PCI_SMB2, &smbuses[1], "SMB2");
+	if (res2 < 0) {
+		dev_err(&dev->dev, "Error probing SMB2.\n");
+		smbuses[1].base = 0;	/* to have a check value */
+	}
+	if ((res1 < 0) && (res2 < 0)) {
+		/* we did not find even one of the SMBuses, so we give up */
+		kfree(smbuses);
+		return -ENODEV;
+	}
+
+	return 0;
+}
+
+
+static void __devexit nforce2_remove(struct pci_dev *dev)
+{
+	struct nforce2_smbus *smbuses = (void*) pci_get_drvdata(dev);
+
+	if (smbuses[0].base) {
+		i2c_del_adapter(&smbuses[0].adapter);
+		release_region(smbuses[0].base, smbuses[0].size);
+	}
+	if (smbuses[1].base) {
+		i2c_del_adapter(&smbuses[1].adapter);
+		release_region(smbuses[1].base, smbuses[1].size);
+	}
+	kfree(smbuses);
+}
+
+static struct pci_driver nforce2_driver = {
+	.name		= "nForce2_smbus",
+	.id_table	= nforce2_ids,
+	.probe		= nforce2_probe,
+	.remove		= __devexit_p(nforce2_remove),
+};
+
+static int __init nforce2_init(void)
+{
+	return pci_register_driver(&nforce2_driver);
+}
+
+static void __exit nforce2_exit(void)
+{
+	pci_unregister_driver(&nforce2_driver);
+}
+
+module_init(nforce2_init);
+module_exit(nforce2_exit);
+
diff --git a/drivers/i2c/busses/i2c-parport-light.c b/drivers/i2c/busses/i2c-parport-light.c
new file mode 100644
index 00000000000..cb5e722301d
--- /dev/null
+++ b/drivers/i2c/busses/i2c-parport-light.c
@@ -0,0 +1,175 @@
+/* ------------------------------------------------------------------------ *
+ * i2c-parport.c I2C bus over parallel port                                 *
+ * ------------------------------------------------------------------------ *
+   Copyright (C) 2003-2004 Jean Delvare <khali@linux-fr.org>
+   
+   Based on older i2c-velleman.c driver
+   Copyright (C) 1995-2000 Simon G. Vogl
+   With some changes from:
+   Frodo Looijaard <frodol@dds.nl>
+   Kyösti Mälkki <kmalkki@cc.hut.fi>
+   
+   This program is free software; you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation; either version 2 of the License, or
+   (at your option) any later version.
+
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with this program; if not, write to the Free Software
+   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ * ------------------------------------------------------------------------ */
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/i2c.h>
+#include <linux/i2c-algo-bit.h>
+#include <asm/io.h>
+#include "i2c-parport.h"
+
+#define DEFAULT_BASE 0x378
+
+static u16 base;
+module_param(base, ushort, 0);
+MODULE_PARM_DESC(base, "Base I/O address");
+
+/* ----- Low-level parallel port access ----------------------------------- */
+
+static inline void port_write(unsigned char p, unsigned char d)
+{
+	outb(d, base+p);
+}
+
+static inline unsigned char port_read(unsigned char p)
+{
+	return inb(base+p);
+}
+
+/* ----- Unified line operation functions --------------------------------- */
+
+static inline void line_set(int state, const struct lineop *op)
+{
+	u8 oldval = port_read(op->port);
+
+	/* Touch only the bit(s) needed */
+	if ((op->inverted && !state) || (!op->inverted && state))
+		port_write(op->port, oldval | op->val);
+	else
+		port_write(op->port, oldval & ~op->val);
+}
+
+static inline int line_get(const struct lineop *op)
+{
+	u8 oldval = port_read(op->port);
+
+	return ((op->inverted && (oldval & op->val) != op->val)
+	    || (!op->inverted && (oldval & op->val) == op->val));
+}
+
+/* ----- I2C algorithm call-back functions and structures ----------------- */
+
+static void parport_setscl(void *data, int state)
+{
+	line_set(state, &adapter_parm[type].setscl);
+}
+
+static void parport_setsda(void *data, int state)
+{
+	line_set(state, &adapter_parm[type].setsda);
+}
+
+static int parport_getscl(void *data)
+{
+	return line_get(&adapter_parm[type].getscl);
+}
+
+static int parport_getsda(void *data)
+{
+	return line_get(&adapter_parm[type].getsda);
+}
+
+/* Encapsulate the functions above in the correct structure
+   Note that getscl will be set to NULL by the attaching code for adapters
+   that cannot read SCL back */
+static struct i2c_algo_bit_data parport_algo_data = {
+	.setsda		= parport_setsda,
+	.setscl		= parport_setscl,
+	.getsda		= parport_getsda,
+	.getscl		= parport_getscl,
+	.udelay		= 50,
+	.mdelay		= 50,
+	.timeout	= HZ,
+}; 
+
+/* ----- I2c structure ---------------------------------------------------- */
+
+static struct i2c_adapter parport_adapter = {
+	.owner		= THIS_MODULE,
+	.class		= I2C_CLASS_HWMON,
+	.id		= I2C_HW_B_LP,
+	.algo_data	= &parport_algo_data,
+	.name		= "Parallel port adapter (light)",
+};
+
+/* ----- Module loading, unloading and information ------------------------ */
+
+static int __init i2c_parport_init(void)
+{
+	int type_count;
+
+	type_count = sizeof(adapter_parm)/sizeof(struct adapter_parm);
+	if (type < 0 || type >= type_count) {
+		printk(KERN_WARNING "i2c-parport: invalid type (%d)\n", type);
+		type = 0;
+	}
+	
+	if (base == 0) {
+		printk(KERN_INFO "i2c-parport: using default base 0x%x\n", DEFAULT_BASE);
+		base = DEFAULT_BASE;
+	}
+
+	if (!request_region(base, 3, "i2c-parport"))
+		return -ENODEV;
+
+        if (!adapter_parm[type].getscl.val)
+		parport_algo_data.getscl = NULL;
+
+	/* Reset hardware to a sane state (SCL and SDA high) */
+	parport_setsda(NULL, 1);
+	parport_setscl(NULL, 1);
+	/* Other init if needed (power on...) */
+	if (adapter_parm[type].init.val)
+		line_set(1, &adapter_parm[type].init);
+
+	if (i2c_bit_add_bus(&parport_adapter) < 0) {
+		printk(KERN_ERR "i2c-parport: Unable to register with I2C\n");
+		release_region(base, 3);
+		return -ENODEV;
+	}
+	
+	return 0;
+}
+
+static void __exit i2c_parport_exit(void)
+{
+	/* Un-init if needed (power off...) */
+	if (adapter_parm[type].init.val)
+		line_set(0, &adapter_parm[type].init);
+
+	i2c_bit_del_bus(&parport_adapter);
+	release_region(base, 3);
+}
+
+MODULE_AUTHOR("Jean Delvare <khali@linux-fr.org>");
+MODULE_DESCRIPTION("I2C bus over parallel port (light)");
+MODULE_LICENSE("GPL");
+
+module_init(i2c_parport_init);
+module_exit(i2c_parport_exit);
diff --git a/drivers/i2c/busses/i2c-parport.c b/drivers/i2c/busses/i2c-parport.c
new file mode 100644
index 00000000000..e9560bab51c
--- /dev/null
+++ b/drivers/i2c/busses/i2c-parport.c
@@ -0,0 +1,267 @@
+/* ------------------------------------------------------------------------ *
+ * i2c-parport.c I2C bus over parallel port                                 *
+ * ------------------------------------------------------------------------ *
+   Copyright (C) 2003-2004 Jean Delvare <khali@linux-fr.org>
+   
+   Based on older i2c-philips-par.c driver
+   Copyright (C) 1995-2000 Simon G. Vogl
+   With some changes from:
+   Frodo Looijaard <frodol@dds.nl>
+   Kyösti Mälkki <kmalkki@cc.hut.fi>
+   
+   This program is free software; you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation; either version 2 of the License, or
+   (at your option) any later version.
+
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with this program; if not, write to the Free Software
+   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ * ------------------------------------------------------------------------ */
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/parport.h>
+#include <linux/i2c.h>
+#include <linux/i2c-algo-bit.h>
+#include "i2c-parport.h"
+
+/* ----- Device list ------------------------------------------------------ */
+
+struct i2c_par {
+	struct pardevice *pdev;
+	struct i2c_adapter adapter;
+	struct i2c_algo_bit_data algo_data;
+	struct i2c_par *next;
+};
+
+static struct i2c_par *adapter_list;
+
+/* ----- Low-level parallel port access ----------------------------------- */
+
+static void port_write_data(struct parport *p, unsigned char d)
+{
+	parport_write_data(p, d);
+}
+
+static void port_write_control(struct parport *p, unsigned char d)
+{
+	parport_write_control(p, d);
+}
+
+static unsigned char port_read_data(struct parport *p)
+{
+	return parport_read_data(p);
+}
+
+static unsigned char port_read_status(struct parport *p)
+{
+	return parport_read_status(p);
+}
+
+static unsigned char port_read_control(struct parport *p)
+{
+	return parport_read_control(p);
+}
+
+static void (*port_write[])(struct parport *, unsigned char) = {
+	port_write_data,
+	NULL,
+	port_write_control,
+};
+
+static unsigned char (*port_read[])(struct parport *) = {
+	port_read_data,
+	port_read_status,
+	port_read_control,
+};
+
+/* ----- Unified line operation functions --------------------------------- */
+
+static inline void line_set(struct parport *data, int state,
+	const struct lineop *op)
+{
+	u8 oldval = port_read[op->port](data);
+
+	/* Touch only the bit(s) needed */
+	if ((op->inverted && !state) || (!op->inverted && state))
+		port_write[op->port](data, oldval | op->val);
+	else
+		port_write[op->port](data, oldval & ~op->val);
+}
+
+static inline int line_get(struct parport *data,
+	const struct lineop *op)
+{
+	u8 oldval = port_read[op->port](data);
+
+	return ((op->inverted && (oldval & op->val) != op->val)
+	    || (!op->inverted && (oldval & op->val) == op->val));
+}
+
+/* ----- I2C algorithm call-back functions and structures ----------------- */
+
+static void parport_setscl(void *data, int state)
+{
+	line_set((struct parport *) data, state, &adapter_parm[type].setscl);
+}
+
+static void parport_setsda(void *data, int state)
+{
+	line_set((struct parport *) data, state, &adapter_parm[type].setsda);
+}
+
+static int parport_getscl(void *data)
+{
+	return line_get((struct parport *) data, &adapter_parm[type].getscl);
+}
+
+static int parport_getsda(void *data)
+{
+	return line_get((struct parport *) data, &adapter_parm[type].getsda);
+}
+
+/* Encapsulate the functions above in the correct structure.
+   Note that this is only a template, from which the real structures are
+   copied. The attaching code will set getscl to NULL for adapters that
+   cannot read SCL back, and will also make the the data field point to
+   the parallel port structure. */
+static struct i2c_algo_bit_data parport_algo_data = {
+	.setsda		= parport_setsda,
+	.setscl		= parport_setscl,
+	.getsda		= parport_getsda,
+	.getscl		= parport_getscl,
+	.udelay		= 60,
+	.mdelay		= 60,
+	.timeout	= HZ,
+}; 
+
+/* ----- I2c and parallel port call-back functions and structures --------- */
+
+static struct i2c_adapter parport_adapter = {
+	.owner		= THIS_MODULE,
+	.class		= I2C_CLASS_HWMON,
+	.id		= I2C_HW_B_LP,
+	.name		= "Parallel port adapter",
+};
+
+static void i2c_parport_attach (struct parport *port)
+{
+	struct i2c_par *adapter;
+	
+	adapter = kmalloc(sizeof(struct i2c_par), GFP_KERNEL);
+	if (adapter == NULL) {
+		printk(KERN_ERR "i2c-parport: Failed to kmalloc\n");
+		return;
+	}
+	memset(adapter, 0x00, sizeof(struct i2c_par));
+
+	pr_debug("i2c-parport: attaching to %s\n", port->name);
+	adapter->pdev = parport_register_device(port, "i2c-parport",
+		NULL, NULL, NULL, PARPORT_FLAG_EXCL, NULL);
+	if (!adapter->pdev) {
+		printk(KERN_ERR "i2c-parport: Unable to register with parport\n");
+		goto ERROR0;
+	}
+
+	/* Fill the rest of the structure */
+	adapter->adapter = parport_adapter;
+	adapter->algo_data = parport_algo_data;
+	if (!adapter_parm[type].getscl.val)
+		adapter->algo_data.getscl = NULL;
+	adapter->algo_data.data = port;
+	adapter->adapter.algo_data = &adapter->algo_data;
+
+	if (parport_claim_or_block(adapter->pdev) < 0) {
+		printk(KERN_ERR "i2c-parport: Could not claim parallel port\n");
+		goto ERROR1;
+	}
+
+	/* Reset hardware to a sane state (SCL and SDA high) */
+	parport_setsda(port, 1);
+	parport_setscl(port, 1);
+	/* Other init if needed (power on...) */
+	if (adapter_parm[type].init.val)
+		line_set(port, 1, &adapter_parm[type].init);
+
+	parport_release(adapter->pdev);
+
+	if (i2c_bit_add_bus(&adapter->adapter) < 0) {
+		printk(KERN_ERR "i2c-parport: Unable to register with I2C\n");
+		goto ERROR1;
+	}
+
+	/* Add the new adapter to the list */
+	adapter->next = adapter_list;
+	adapter_list = adapter;
+        return;
+
+ERROR1:
+	parport_unregister_device(adapter->pdev);
+ERROR0:
+	kfree(adapter);
+}
+
+static void i2c_parport_detach (struct parport *port)
+{
+	struct i2c_par *adapter, *prev;
+
+	/* Walk the list */
+	for (prev = NULL, adapter = adapter_list; adapter;
+	     prev = adapter, adapter = adapter->next) {
+		if (adapter->pdev->port == port) {
+			/* Un-init if needed (power off...) */
+			if (adapter_parm[type].init.val)
+				line_set(port, 0, &adapter_parm[type].init);
+				
+			i2c_bit_del_bus(&adapter->adapter);
+			parport_unregister_device(adapter->pdev);
+			if (prev)
+				prev->next = adapter->next;
+			else
+				adapter_list = adapter->next;
+			kfree(adapter);
+			return;
+		}
+	}
+}
+
+static struct parport_driver i2c_driver = {
+	.name	= "i2c-parport",
+	.attach	= i2c_parport_attach,
+	.detach	= i2c_parport_detach,
+};
+
+/* ----- Module loading, unloading and information ------------------------ */
+
+static int __init i2c_parport_init(void)
+{
+	int type_count;
+
+	type_count = sizeof(adapter_parm)/sizeof(struct adapter_parm);
+	if (type < 0 || type >= type_count) {
+		printk(KERN_WARNING "i2c-parport: invalid type (%d)\n", type);
+		type = 0;
+	}
+	
+	return parport_register_driver(&i2c_driver);
+}
+
+static void __exit i2c_parport_exit(void)
+{
+	parport_unregister_driver(&i2c_driver);
+}
+
+MODULE_AUTHOR("Jean Delvare <khali@linux-fr.org>");
+MODULE_DESCRIPTION("I2C bus over parallel port");
+MODULE_LICENSE("GPL");
+
+module_init(i2c_parport_init);
+module_exit(i2c_parport_exit);
diff --git a/drivers/i2c/busses/i2c-parport.h b/drivers/i2c/busses/i2c-parport.h
new file mode 100644
index 00000000000..f63a5377928
--- /dev/null
+++ b/drivers/i2c/busses/i2c-parport.h
@@ -0,0 +1,94 @@
+/* ------------------------------------------------------------------------ *
+ * i2c-parport.h I2C bus over parallel port                                 *
+ * ------------------------------------------------------------------------ *
+   Copyright (C) 2003-2004 Jean Delvare <khali@linux-fr.org>
+   
+   This program is free software; you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation; either version 2 of the License, or
+   (at your option) any later version.
+
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with this program; if not, write to the Free Software
+   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ * ------------------------------------------------------------------------ */
+
+#ifdef DATA
+#undef DATA
+#endif
+
+#define DATA	0
+#define STAT	1
+#define CTRL	2
+
+struct lineop {
+	u8 val;
+	u8 port;
+	u8 inverted;
+};
+
+struct adapter_parm {
+	struct lineop setsda;
+	struct lineop setscl;
+	struct lineop getsda;
+	struct lineop getscl;
+	struct lineop init;
+};
+
+static struct adapter_parm adapter_parm[] = {
+	/* type 0: Philips adapter */
+	{
+		.setsda	= { 0x80, DATA, 1 },
+		.setscl	= { 0x08, CTRL, 0 },
+		.getsda	= { 0x80, STAT, 0 },
+		.getscl	= { 0x08, STAT, 0 },
+	},
+	/* type 1: home brew teletext adapter */
+	{
+		.setsda	= { 0x02, DATA, 0 },
+		.setscl	= { 0x01, DATA, 0 },
+		.getsda	= { 0x80, STAT, 1 },
+	},
+	/* type 2: Velleman K8000 adapter */
+	{
+		.setsda	= { 0x02, CTRL, 1 },
+		.setscl	= { 0x08, CTRL, 1 },
+		.getsda	= { 0x10, STAT, 0 },
+	},
+	/* type 3: ELV adapter */
+	{
+		.setsda	= { 0x02, DATA, 1 },
+		.setscl	= { 0x01, DATA, 1 },
+		.getsda	= { 0x40, STAT, 1 },
+		.getscl	= { 0x08, STAT, 1 },
+	},
+	/* type 4: ADM1032 evaluation board */
+	{
+		.setsda	= { 0x02, DATA, 1 },
+		.setscl	= { 0x01, DATA, 1 },
+		.getsda	= { 0x10, STAT, 1 },
+		.init	= { 0xf0, DATA, 0 },
+	},
+	/* type 5: ADM1025, ADM1030 and ADM1031 evaluation boards */
+	{
+		.setsda	= { 0x02, DATA, 1 },
+		.setscl	= { 0x01, DATA, 1 },
+		.getsda	= { 0x10, STAT, 1 },
+	},
+};
+
+static int type;
+module_param(type, int, 0);
+MODULE_PARM_DESC(type,
+	"Type of adapter:\n"
+	" 0 = Philips adapter\n"
+	" 1 = home brew teletext adapter\n"
+	" 2 = Velleman K8000 adapter\n"
+	" 3 = ELV adapter\n"
+	" 4 = ADM1032 evaluation board\n"
+	" 5 = ADM1025, ADM1030 and ADM1031 evaluation boards\n");
diff --git a/drivers/i2c/busses/i2c-pca-isa.c b/drivers/i2c/busses/i2c-pca-isa.c
new file mode 100644
index 00000000000..9c611134db9
--- /dev/null
+++ b/drivers/i2c/busses/i2c-pca-isa.c
@@ -0,0 +1,184 @@
+/*
+ *  i2c-pca-isa.c driver for PCA9564 on ISA boards
+ *    Copyright (C) 2004 Arcom Control Systems
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/ioport.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <linux/wait.h>
+
+#include <linux/i2c.h>
+#include <linux/i2c-algo-pca.h>
+
+#include <asm/io.h>
+#include <asm/irq.h>
+
+#include "../algos/i2c-algo-pca.h"
+
+#define IO_SIZE 4
+
+#undef DEBUG_IO
+//#define DEBUG_IO
+
+static unsigned long base   = 0x330;
+static int irq 	  = 10;
+
+/* Data sheet recommends 59kHz for 100kHz operation due to variation
+ * in the actual clock rate */
+static int clock  = I2C_PCA_CON_59kHz;
+
+static int own    = 0x55;
+
+static wait_queue_head_t pca_wait;
+
+static int pca_isa_getown(struct i2c_algo_pca_data *adap)
+{
+	return (own);
+}
+
+static int pca_isa_getclock(struct i2c_algo_pca_data *adap)
+{
+	return (clock);
+}
+
+static void
+pca_isa_writebyte(struct i2c_algo_pca_data *adap, int reg, int val)
+{
+#ifdef DEBUG_IO
+	static char *names[] = { "T/O", "DAT", "ADR", "CON" };
+	printk("*** write %s at %#lx <= %#04x\n", names[reg], base+reg, val);
+#endif
+	outb(val, base+reg);
+}
+
+static int
+pca_isa_readbyte(struct i2c_algo_pca_data *adap, int reg)
+{
+	int res = inb(base+reg);
+#ifdef DEBUG_IO
+	{
+		static char *names[] = { "STA", "DAT", "ADR", "CON" };	
+		printk("*** read  %s => %#04x\n", names[reg], res);
+	}
+#endif
+	return res;
+}
+
+static int pca_isa_waitforinterrupt(struct i2c_algo_pca_data *adap)
+{
+	int ret = 0;
+
+	if (irq > -1) {
+		ret = wait_event_interruptible(pca_wait,
+					       pca_isa_readbyte(adap, I2C_PCA_CON) & I2C_PCA_CON_SI);
+	} else {
+		while ((pca_isa_readbyte(adap, I2C_PCA_CON) & I2C_PCA_CON_SI) == 0) 
+			udelay(100);
+	}
+	return ret;
+}
+
+static irqreturn_t pca_handler(int this_irq, void *dev_id, struct pt_regs *regs) {
+	wake_up_interruptible(&pca_wait);
+	return IRQ_HANDLED;
+}
+
+static struct i2c_algo_pca_data pca_isa_data = {
+	.get_own		= pca_isa_getown,
+	.get_clock		= pca_isa_getclock,
+	.write_byte		= pca_isa_writebyte,
+	.read_byte		= pca_isa_readbyte,
+	.wait_for_interrupt	= pca_isa_waitforinterrupt,
+};
+
+static struct i2c_adapter pca_isa_ops = {
+	.owner          = THIS_MODULE,
+	.id		= I2C_HW_A_ISA,
+	.algo_data	= &pca_isa_data,
+	.name		= "PCA9564 ISA Adapter",
+};
+
+static int __init pca_isa_init(void)
+{
+
+	init_waitqueue_head(&pca_wait);
+
+	printk(KERN_INFO "i2c-pca-isa: i/o base %#08lx. irq %d\n", base, irq);
+
+	if (!request_region(base, IO_SIZE, "i2c-pca-isa")) {
+		printk(KERN_ERR "i2c-pca-isa: I/O address %#08lx is in use.\n", base);
+		goto out;
+	}
+
+	if (irq > -1) {
+		if (request_irq(irq, pca_handler, 0, "i2c-pca-isa", &pca_isa_ops) < 0) {
+			printk(KERN_ERR "i2c-pca-isa: Request irq%d failed\n", irq);
+			goto out_region;
+		}
+	}
+
+	if (i2c_pca_add_bus(&pca_isa_ops) < 0) {
+		printk(KERN_ERR "i2c-pca-isa: Failed to add i2c bus\n");
+		goto out_irq;
+	}
+
+	return 0;
+
+ out_irq:
+	if (irq > -1)
+		free_irq(irq, &pca_isa_ops);
+ out_region:
+	release_region(base, IO_SIZE);
+ out:
+	return -ENODEV;
+}
+
+static void pca_isa_exit(void)
+{
+	i2c_pca_del_bus(&pca_isa_ops);
+
+	if (irq > 0) {
+		disable_irq(irq);
+		free_irq(irq, &pca_isa_ops);
+	}
+	release_region(base, IO_SIZE);
+}
+
+MODULE_AUTHOR("Ian Campbell <icampbell@arcom.com>");
+MODULE_DESCRIPTION("ISA base PCA9564 driver");
+MODULE_LICENSE("GPL");
+
+module_param(base, ulong, 0);
+MODULE_PARM_DESC(base, "I/O base address");
+
+module_param(irq, int, 0);
+MODULE_PARM_DESC(irq, "IRQ");
+module_param(clock, int, 0);
+MODULE_PARM_DESC(clock, "Clock rate as described in table 1 of PCA9564 datasheet");
+
+module_param(own, int, 0); /* the driver can't do slave mode, so there's no real point in this */
+
+module_init(pca_isa_init);
+module_exit(pca_isa_exit);
diff --git a/drivers/i2c/busses/i2c-piix4.c b/drivers/i2c/busses/i2c-piix4.c
new file mode 100644
index 00000000000..646381b6b3b
--- /dev/null
+++ b/drivers/i2c/busses/i2c-piix4.c
@@ -0,0 +1,490 @@
+/*
+    piix4.c - Part of lm_sensors, Linux kernel modules for hardware
+              monitoring
+    Copyright (c) 1998 - 2002 Frodo Looijaard <frodol@dds.nl> and
+    Philip Edelbrock <phil@netroedge.com>
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+/*
+   Supports:
+	Intel PIIX4, 440MX
+	Serverworks OSB4, CSB5, CSB6
+	SMSC Victory66
+
+   Note: we assume there can only be one device, with one SMBus interface.
+*/
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/stddef.h>
+#include <linux/sched.h>
+#include <linux/ioport.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/apm_bios.h>
+#include <linux/dmi.h>
+#include <asm/io.h>
+
+
+struct sd {
+	const unsigned short mfr;
+	const unsigned short dev;
+	const unsigned char fn;
+	const char *name;
+};
+
+/* PIIX4 SMBus address offsets */
+#define SMBHSTSTS	(0 + piix4_smba)
+#define SMBHSLVSTS	(1 + piix4_smba)
+#define SMBHSTCNT	(2 + piix4_smba)
+#define SMBHSTCMD	(3 + piix4_smba)
+#define SMBHSTADD	(4 + piix4_smba)
+#define SMBHSTDAT0	(5 + piix4_smba)
+#define SMBHSTDAT1	(6 + piix4_smba)
+#define SMBBLKDAT	(7 + piix4_smba)
+#define SMBSLVCNT	(8 + piix4_smba)
+#define SMBSHDWCMD	(9 + piix4_smba)
+#define SMBSLVEVT	(0xA + piix4_smba)
+#define SMBSLVDAT	(0xC + piix4_smba)
+
+/* count for request_region */
+#define SMBIOSIZE	8
+
+/* PCI Address Constants */
+#define SMBBA		0x090
+#define SMBHSTCFG	0x0D2
+#define SMBSLVC		0x0D3
+#define SMBSHDW1	0x0D4
+#define SMBSHDW2	0x0D5
+#define SMBREV		0x0D6
+
+/* Other settings */
+#define MAX_TIMEOUT	500
+#define  ENABLE_INT9	0
+
+/* PIIX4 constants */
+#define PIIX4_QUICK		0x00
+#define PIIX4_BYTE		0x04
+#define PIIX4_BYTE_DATA		0x08
+#define PIIX4_WORD_DATA		0x0C
+#define PIIX4_BLOCK_DATA	0x14
+
+/* insmod parameters */
+
+/* If force is set to anything different from 0, we forcibly enable the
+   PIIX4. DANGEROUS! */
+static int force = 0;
+module_param (force, int, 0);
+MODULE_PARM_DESC(force, "Forcibly enable the PIIX4. DANGEROUS!");
+
+/* If force_addr is set to anything different from 0, we forcibly enable
+   the PIIX4 at the given address. VERY DANGEROUS! */
+static int force_addr = 0;
+module_param (force_addr, int, 0);
+MODULE_PARM_DESC(force_addr,
+		 "Forcibly enable the PIIX4 at the given address. "
+		 "EXTREMELY DANGEROUS!");
+
+/* If fix_hstcfg is set to anything different from 0, we reset one of the
+   registers to be a valid value. */
+static int fix_hstcfg = 0;
+module_param (fix_hstcfg, int, 0);
+MODULE_PARM_DESC(fix_hstcfg,
+		"Fix config register. Needed on some boards (Force CPCI735).");
+
+static int piix4_transaction(void);
+
+static unsigned short piix4_smba = 0;
+static struct i2c_adapter piix4_adapter;
+
+static struct dmi_system_id __devinitdata piix4_dmi_table[] = {
+	{
+		.ident = "IBM",
+		.matches = { DMI_MATCH(DMI_SYS_VENDOR, "IBM"), },
+	},
+	{ },
+};
+
+static int __devinit piix4_setup(struct pci_dev *PIIX4_dev,
+				const struct pci_device_id *id)
+{
+	unsigned char temp;
+
+	/* match up the function */
+	if (PCI_FUNC(PIIX4_dev->devfn) != id->driver_data)
+		return -ENODEV;
+
+	dev_info(&PIIX4_dev->dev, "Found %s device\n", pci_name(PIIX4_dev));
+
+	/* Don't access SMBus on IBM systems which get corrupted eeproms */
+	if (dmi_check_system(piix4_dmi_table) &&
+			PIIX4_dev->vendor == PCI_VENDOR_ID_INTEL) {
+		dev_err(&PIIX4_dev->dev, "IBM Laptop detected; this module "
+			"may corrupt your serial eeprom! Refusing to load "
+			"module!\n");
+		return -EPERM;
+	}
+
+	/* Determine the address of the SMBus areas */
+	if (force_addr) {
+		piix4_smba = force_addr & 0xfff0;
+		force = 0;
+	} else {
+		pci_read_config_word(PIIX4_dev, SMBBA, &piix4_smba);
+		piix4_smba &= 0xfff0;
+		if(piix4_smba == 0) {
+			dev_err(&PIIX4_dev->dev, "SMB base address "
+				"uninitialized - upgrade BIOS or use "
+				"force_addr=0xaddr\n");
+			return -ENODEV;
+		}
+	}
+
+	if (!request_region(piix4_smba, SMBIOSIZE, "piix4-smbus")) {
+		dev_err(&PIIX4_dev->dev, "SMB region 0x%x already in use!\n",
+			piix4_smba);
+		return -ENODEV;
+	}
+
+	pci_read_config_byte(PIIX4_dev, SMBHSTCFG, &temp);
+
+	/* Some BIOS will set up the chipset incorrectly and leave a register
+	   in an undefined state (causing I2C to act very strangely). */
+	if (temp & 0x02) {
+		if (fix_hstcfg) {
+			dev_info(&PIIX4_dev->dev, "Working around buggy BIOS "
+					"(I2C)\n");
+			temp &= 0xfd;
+			pci_write_config_byte(PIIX4_dev, SMBHSTCFG, temp);
+		} else {
+			dev_info(&PIIX4_dev->dev, "Unusual config register "
+					"value\n");
+			dev_info(&PIIX4_dev->dev, "Try using fix_hstcfg=1 if "
+					"you experience problems\n");
+		}
+	}
+ 
+	/* If force_addr is set, we program the new address here. Just to make
+	   sure, we disable the PIIX4 first. */
+	if (force_addr) {
+		pci_write_config_byte(PIIX4_dev, SMBHSTCFG, temp & 0xfe);
+		pci_write_config_word(PIIX4_dev, SMBBA, piix4_smba);
+		pci_write_config_byte(PIIX4_dev, SMBHSTCFG, temp | 0x01);
+		dev_info(&PIIX4_dev->dev, "WARNING: SMBus interface set to "
+			"new address %04x!\n", piix4_smba);
+	} else if ((temp & 1) == 0) {
+		if (force) {
+			/* This should never need to be done, but has been
+			 * noted that many Dell machines have the SMBus
+			 * interface on the PIIX4 disabled!? NOTE: This assumes
+			 * I/O space and other allocations WERE done by the
+			 * Bios!  Don't complain if your hardware does weird
+			 * things after enabling this. :') Check for Bios
+			 * updates before resorting to this.
+			 */
+			pci_write_config_byte(PIIX4_dev, SMBHSTCFG,
+					      temp | 1);
+			dev_printk(KERN_NOTICE, &PIIX4_dev->dev,
+				"WARNING: SMBus interface has been "
+				"FORCEFULLY ENABLED!\n");
+		} else {
+			dev_err(&PIIX4_dev->dev,
+				"Host SMBus controller not enabled!\n");
+			release_region(piix4_smba, SMBIOSIZE);
+			piix4_smba = 0;
+			return -ENODEV;
+		}
+	}
+
+	if ((temp & 0x0E) == 8)
+		dev_dbg(&PIIX4_dev->dev, "Using Interrupt 9 for SMBus.\n");
+	else if ((temp & 0x0E) == 0)
+		dev_dbg(&PIIX4_dev->dev, "Using Interrupt SMI# for SMBus.\n");
+	else
+		dev_err(&PIIX4_dev->dev, "Illegal Interrupt configuration "
+			"(or code out of date)!\n");
+
+	pci_read_config_byte(PIIX4_dev, SMBREV, &temp);
+	dev_dbg(&PIIX4_dev->dev, "SMBREV = 0x%X\n", temp);
+	dev_dbg(&PIIX4_dev->dev, "SMBA = 0x%X\n", piix4_smba);
+
+	return 0;
+}
+
+/* Another internally used function */
+static int piix4_transaction(void)
+{
+	int temp;
+	int result = 0;
+	int timeout = 0;
+
+	dev_dbg(&piix4_adapter.dev, "Transaction (pre): CNT=%02x, CMD=%02x, "
+		"ADD=%02x, DAT0=%02x, DAT1=%02x\n", inb_p(SMBHSTCNT),
+		inb_p(SMBHSTCMD), inb_p(SMBHSTADD), inb_p(SMBHSTDAT0),
+		inb_p(SMBHSTDAT1));
+
+	/* Make sure the SMBus host is ready to start transmitting */
+	if ((temp = inb_p(SMBHSTSTS)) != 0x00) {
+		dev_dbg(&piix4_adapter.dev, "SMBus busy (%02x). "
+			"Resetting... \n", temp);
+		outb_p(temp, SMBHSTSTS);
+		if ((temp = inb_p(SMBHSTSTS)) != 0x00) {
+			dev_err(&piix4_adapter.dev, "Failed! (%02x)\n", temp);
+			return -1;
+		} else {
+			dev_dbg(&piix4_adapter.dev, "Successfull!\n");
+		}
+	}
+
+	/* start the transaction by setting bit 6 */
+	outb_p(inb(SMBHSTCNT) | 0x040, SMBHSTCNT);
+
+	/* We will always wait for a fraction of a second! (See PIIX4 docs errata) */
+	do {
+		msleep(1);
+		temp = inb_p(SMBHSTSTS);
+	} while ((temp & 0x01) && (timeout++ < MAX_TIMEOUT));
+
+	/* If the SMBus is still busy, we give up */
+	if (timeout >= MAX_TIMEOUT) {
+		dev_err(&piix4_adapter.dev, "SMBus Timeout!\n");
+		result = -1;
+	}
+
+	if (temp & 0x10) {
+		result = -1;
+		dev_err(&piix4_adapter.dev, "Error: Failed bus transaction\n");
+	}
+
+	if (temp & 0x08) {
+		result = -1;
+		dev_dbg(&piix4_adapter.dev, "Bus collision! SMBus may be "
+			"locked until next hard reset. (sorry!)\n");
+		/* Clock stops and slave is stuck in mid-transmission */
+	}
+
+	if (temp & 0x04) {
+		result = -1;
+		dev_dbg(&piix4_adapter.dev, "Error: no response!\n");
+	}
+
+	if (inb_p(SMBHSTSTS) != 0x00)
+		outb_p(inb(SMBHSTSTS), SMBHSTSTS);
+
+	if ((temp = inb_p(SMBHSTSTS)) != 0x00) {
+		dev_err(&piix4_adapter.dev, "Failed reset at end of "
+			"transaction (%02x)\n", temp);
+	}
+	dev_dbg(&piix4_adapter.dev, "Transaction (post): CNT=%02x, CMD=%02x, "
+		"ADD=%02x, DAT0=%02x, DAT1=%02x\n", inb_p(SMBHSTCNT),
+		inb_p(SMBHSTCMD), inb_p(SMBHSTADD), inb_p(SMBHSTDAT0),
+		inb_p(SMBHSTDAT1));
+	return result;
+}
+
+/* Return -1 on error. */
+static s32 piix4_access(struct i2c_adapter * adap, u16 addr,
+		 unsigned short flags, char read_write,
+		 u8 command, int size, union i2c_smbus_data * data)
+{
+	int i, len;
+
+	switch (size) {
+	case I2C_SMBUS_PROC_CALL:
+		dev_err(&adap->dev, "I2C_SMBUS_PROC_CALL not supported!\n");
+		return -1;
+	case I2C_SMBUS_QUICK:
+		outb_p(((addr & 0x7f) << 1) | (read_write & 0x01),
+		       SMBHSTADD);
+		size = PIIX4_QUICK;
+		break;
+	case I2C_SMBUS_BYTE:
+		outb_p(((addr & 0x7f) << 1) | (read_write & 0x01),
+		       SMBHSTADD);
+		if (read_write == I2C_SMBUS_WRITE)
+			outb_p(command, SMBHSTCMD);
+		size = PIIX4_BYTE;
+		break;
+	case I2C_SMBUS_BYTE_DATA:
+		outb_p(((addr & 0x7f) << 1) | (read_write & 0x01),
+		       SMBHSTADD);
+		outb_p(command, SMBHSTCMD);
+		if (read_write == I2C_SMBUS_WRITE)
+			outb_p(data->byte, SMBHSTDAT0);
+		size = PIIX4_BYTE_DATA;
+		break;
+	case I2C_SMBUS_WORD_DATA:
+		outb_p(((addr & 0x7f) << 1) | (read_write & 0x01),
+		       SMBHSTADD);
+		outb_p(command, SMBHSTCMD);
+		if (read_write == I2C_SMBUS_WRITE) {
+			outb_p(data->word & 0xff, SMBHSTDAT0);
+			outb_p((data->word & 0xff00) >> 8, SMBHSTDAT1);
+		}
+		size = PIIX4_WORD_DATA;
+		break;
+	case I2C_SMBUS_BLOCK_DATA:
+		outb_p(((addr & 0x7f) << 1) | (read_write & 0x01),
+		       SMBHSTADD);
+		outb_p(command, SMBHSTCMD);
+		if (read_write == I2C_SMBUS_WRITE) {
+			len = data->block[0];
+			if (len < 0)
+				len = 0;
+			if (len > 32)
+				len = 32;
+			outb_p(len, SMBHSTDAT0);
+			i = inb_p(SMBHSTCNT);	/* Reset SMBBLKDAT */
+			for (i = 1; i <= len; i++)
+				outb_p(data->block[i], SMBBLKDAT);
+		}
+		size = PIIX4_BLOCK_DATA;
+		break;
+	}
+
+	outb_p((size & 0x1C) + (ENABLE_INT9 & 1), SMBHSTCNT);
+
+	if (piix4_transaction())	/* Error in transaction */
+		return -1;
+
+	if ((read_write == I2C_SMBUS_WRITE) || (size == PIIX4_QUICK))
+		return 0;
+
+
+	switch (size) {
+	case PIIX4_BYTE:	/* Where is the result put? I assume here it is in
+				   SMBHSTDAT0 but it might just as well be in the
+				   SMBHSTCMD. No clue in the docs */
+
+		data->byte = inb_p(SMBHSTDAT0);
+		break;
+	case PIIX4_BYTE_DATA:
+		data->byte = inb_p(SMBHSTDAT0);
+		break;
+	case PIIX4_WORD_DATA:
+		data->word = inb_p(SMBHSTDAT0) + (inb_p(SMBHSTDAT1) << 8);
+		break;
+	case PIIX4_BLOCK_DATA:
+		data->block[0] = inb_p(SMBHSTDAT0);
+		i = inb_p(SMBHSTCNT);	/* Reset SMBBLKDAT */
+		for (i = 1; i <= data->block[0]; i++)
+			data->block[i] = inb_p(SMBBLKDAT);
+		break;
+	}
+	return 0;
+}
+
+static u32 piix4_func(struct i2c_adapter *adapter)
+{
+	return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE |
+	    I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA |
+	    I2C_FUNC_SMBUS_BLOCK_DATA;
+}
+
+static struct i2c_algorithm smbus_algorithm = {
+	.name		= "Non-I2C SMBus adapter",
+	.id		= I2C_ALGO_SMBUS,
+	.smbus_xfer	= piix4_access,
+	.functionality	= piix4_func,
+};
+
+static struct i2c_adapter piix4_adapter = {
+	.owner		= THIS_MODULE,
+	.class		= I2C_CLASS_HWMON,
+	.algo		= &smbus_algorithm,
+	.name		= "unset",
+};
+
+static struct pci_device_id piix4_ids[] = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371AB_3),
+	  .driver_data = 3 },
+	{ PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_OSB4),
+	  .driver_data = 0 },
+	{ PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_CSB5),
+	  .driver_data = 0 },
+	{ PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_CSB6),
+	  .driver_data = 0 },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443MX_3),
+	  .driver_data = 3 },
+	{ PCI_DEVICE(PCI_VENDOR_ID_EFAR, PCI_DEVICE_ID_EFAR_SLC90E66_3),
+	  .driver_data = 0 },
+	{ 0, }
+};
+
+MODULE_DEVICE_TABLE (pci, piix4_ids);
+
+static int __devinit piix4_probe(struct pci_dev *dev,
+				const struct pci_device_id *id)
+{
+	int retval;
+
+	retval = piix4_setup(dev, id);
+	if (retval)
+		return retval;
+
+	/* set up the driverfs linkage to our parent device */
+	piix4_adapter.dev.parent = &dev->dev;
+
+	snprintf(piix4_adapter.name, I2C_NAME_SIZE,
+		"SMBus PIIX4 adapter at %04x", piix4_smba);
+
+	if ((retval = i2c_add_adapter(&piix4_adapter))) {
+		dev_err(&dev->dev, "Couldn't register adapter!\n");
+		release_region(piix4_smba, SMBIOSIZE);
+		piix4_smba = 0;
+	}
+
+	return retval;
+}
+
+static void __devexit piix4_remove(struct pci_dev *dev)
+{
+	if (piix4_smba) {
+		i2c_del_adapter(&piix4_adapter);
+		release_region(piix4_smba, SMBIOSIZE);
+		piix4_smba = 0;
+	}
+}
+
+static struct pci_driver piix4_driver = {
+	.name		= "piix4_smbus",
+	.id_table	= piix4_ids,
+	.probe		= piix4_probe,
+	.remove		= __devexit_p(piix4_remove),
+};
+
+static int __init i2c_piix4_init(void)
+{
+	return pci_register_driver(&piix4_driver);
+}
+
+static void __exit i2c_piix4_exit(void)
+{
+	pci_unregister_driver(&piix4_driver);
+}
+
+MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl> and "
+		"Philip Edelbrock <phil@netroedge.com>");
+MODULE_DESCRIPTION("PIIX4 SMBus driver");
+MODULE_LICENSE("GPL");
+
+module_init(i2c_piix4_init);
+module_exit(i2c_piix4_exit);
diff --git a/drivers/i2c/busses/i2c-prosavage.c b/drivers/i2c/busses/i2c-prosavage.c
new file mode 100644
index 00000000000..13d66289933
--- /dev/null
+++ b/drivers/i2c/busses/i2c-prosavage.c
@@ -0,0 +1,334 @@
+/*
+ *    kernel/busses/i2c-prosavage.c
+ *
+ *    i2c bus driver for S3/VIA 8365/8375 graphics processor.
+ *    Copyright (c) 2003 Henk Vergonet <henk@god.dyndns.org>
+ *    Based on code written by:
+ *	Frodo Looijaard <frodol@dds.nl>,
+ *	Philip Edelbrock <phil@netroedge.com>,
+ *	Ralph Metzler <rjkm@thp.uni-koeln.de>, and
+ *	Mark D. Studebaker <mdsxyz123@yahoo.com>
+ *	Simon Vogl
+ *	and others
+ *
+ *    Please read the lm_sensors documentation for details on use.
+ *
+ *    This program is free software; you can redistribute it and/or modify
+ *    it under the terms of the GNU General Public License as published by
+ *    the Free Software Foundation; either version 2 of the License, or
+ *    (at your option) any later version.
+ *
+ *    This program is distributed in the hope that it will be useful,
+ *    but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *    GNU General Public License for more details.
+ *
+ *    You should have received a copy of the GNU General Public License
+ *    along with this program; if not, write to the Free Software
+ *    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+/*  18-05-2003 HVE - created
+ *  14-06-2003 HVE - adapted for lm_sensors2
+ *  17-06-2003 HVE - linux 2.5.xx compatible
+ *  18-06-2003 HVE - codingstyle
+ *  21-06-2003 HVE - compatibility lm_sensors2 and linux 2.5.xx
+ *		     codingstyle, mmio enabled
+ *
+ *  This driver interfaces to the I2C bus of the VIA north bridge embedded
+ *  ProSavage4/8 devices. Usefull for gaining access to the TV Encoder chips.
+ *
+ *  Graphics cores:
+ *   S3/VIA KM266/VT8375 aka ProSavage8
+ *   S3/VIA KM133/VT8365 aka Savage4
+ *
+ *  Two serial busses are implemented:
+ *   SERIAL1 - I2C serial communications interface
+ *   SERIAL2 - DDC2 monitor communications interface
+ *
+ *  Tested on a FX41 mainboard, see http://www.shuttle.com
+ * 
+ *
+ *  TODO:
+ *  - integration with prosavage framebuffer device
+ *    (Additional documentation needed :(
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/i2c.h>
+#include <linux/i2c-algo-bit.h>
+#include <asm/io.h>
+
+/*
+ * driver configuration
+ */
+#define MAX_BUSSES	2
+
+struct s_i2c_bus {
+	void __iomem *mmvga;
+	int	i2c_reg;
+	int	adap_ok;
+	struct i2c_adapter		adap;
+	struct i2c_algo_bit_data	algo;
+};
+
+struct s_i2c_chip {
+	void __iomem *mmio;
+	struct s_i2c_bus	i2c_bus[MAX_BUSSES];
+};
+
+
+/*
+ * i2c configuration
+ */
+#ifndef I2C_HW_B_S3VIA
+#define I2C_HW_B_S3VIA	0x18	/* S3VIA ProSavage adapter		*/
+#endif
+
+/* delays */
+#define CYCLE_DELAY	10
+#define TIMEOUT		(HZ / 2)
+
+
+/* 
+ * S3/VIA 8365/8375 registers
+ */
+#define VGA_CR_IX	0x3d4
+#define VGA_CR_DATA	0x3d5
+
+#define CR_SERIAL1	0xa0	/* I2C serial communications interface */
+#define MM_SERIAL1	0xff20
+#define CR_SERIAL2	0xb1	/* DDC2 monitor communications interface */
+
+/* based on vt8365 documentation */
+#define I2C_ENAB	0x10
+#define I2C_SCL_OUT	0x01
+#define I2C_SDA_OUT	0x02
+#define I2C_SCL_IN	0x04
+#define I2C_SDA_IN	0x08
+
+#define SET_CR_IX(p, val)	writeb((val), (p)->mmvga + VGA_CR_IX)
+#define SET_CR_DATA(p, val)	writeb((val), (p)->mmvga + VGA_CR_DATA)
+#define GET_CR_DATA(p)		readb((p)->mmvga + VGA_CR_DATA)
+
+
+/*
+ * Serial bus line handling
+ *
+ * serial communications register as parameter in private data
+ *
+ * TODO: locks with other code sections accessing video registers?
+ */
+static void bit_s3via_setscl(void *bus, int val)
+{
+	struct s_i2c_bus *p = (struct s_i2c_bus *)bus;
+	unsigned int r;
+
+	SET_CR_IX(p, p->i2c_reg);
+	r = GET_CR_DATA(p);
+	r |= I2C_ENAB;
+	if (val) {
+		r |= I2C_SCL_OUT;
+	} else {
+		r &= ~I2C_SCL_OUT;
+	}
+	SET_CR_DATA(p, r);
+}
+
+static void bit_s3via_setsda(void *bus, int val)
+{
+	struct s_i2c_bus *p = (struct s_i2c_bus *)bus;
+	unsigned int r;
+	
+	SET_CR_IX(p, p->i2c_reg);
+	r = GET_CR_DATA(p);
+	r |= I2C_ENAB;
+	if (val) {
+		r |= I2C_SDA_OUT;
+	} else {
+		r &= ~I2C_SDA_OUT;
+	}
+	SET_CR_DATA(p, r);
+}
+
+static int bit_s3via_getscl(void *bus)
+{
+	struct s_i2c_bus *p = (struct s_i2c_bus *)bus;
+
+	SET_CR_IX(p, p->i2c_reg);
+	return (0 != (GET_CR_DATA(p) & I2C_SCL_IN));
+}
+
+static int bit_s3via_getsda(void *bus)
+{
+	struct s_i2c_bus *p = (struct s_i2c_bus *)bus;
+
+	SET_CR_IX(p, p->i2c_reg);
+	return (0 != (GET_CR_DATA(p) & I2C_SDA_IN));
+}
+
+
+/*
+ * adapter initialisation
+ */
+static int i2c_register_bus(struct pci_dev *dev, struct s_i2c_bus *p, void __iomem *mmvga, u32 i2c_reg)
+{
+	int ret;
+	p->adap.owner	  = THIS_MODULE;
+	p->adap.id	  = I2C_HW_B_S3VIA;
+	p->adap.algo_data = &p->algo;
+	p->adap.dev.parent = &dev->dev;
+	p->algo.setsda	  = bit_s3via_setsda;
+	p->algo.setscl	  = bit_s3via_setscl;
+	p->algo.getsda	  = bit_s3via_getsda;
+	p->algo.getscl	  = bit_s3via_getscl;
+	p->algo.udelay	  = CYCLE_DELAY;
+	p->algo.mdelay	  = CYCLE_DELAY;
+	p->algo.timeout	  = TIMEOUT;
+	p->algo.data	  = p;
+	p->mmvga	  = mmvga;
+	p->i2c_reg	  = i2c_reg;
+    
+	ret = i2c_bit_add_bus(&p->adap);
+	if (ret) {
+		return ret;
+	}
+
+	p->adap_ok = 1;
+	return 0;
+}
+
+
+/*
+ * Cleanup stuff
+ */
+static void prosavage_remove(struct pci_dev *dev)
+{
+	struct s_i2c_chip *chip;
+	int i, ret;
+
+	chip = (struct s_i2c_chip *)pci_get_drvdata(dev);
+
+	if (!chip) {
+		return;
+	}
+	for (i = MAX_BUSSES - 1; i >= 0; i--) {
+		if (chip->i2c_bus[i].adap_ok == 0)
+			continue;
+
+		ret = i2c_bit_del_bus(&chip->i2c_bus[i].adap);
+	        if (ret) {
+			dev_err(&dev->dev, "%s not removed\n",
+				chip->i2c_bus[i].adap.name);
+		}
+	}
+	if (chip->mmio) {
+		iounmap(chip->mmio);
+	}
+	kfree(chip);
+}
+
+
+/*
+ * Detect chip and initialize it
+ */
+static int __devinit prosavage_probe(struct pci_dev *dev, const struct pci_device_id *id)
+{
+	int ret;
+	unsigned long base, len;
+	struct s_i2c_chip *chip;
+	struct s_i2c_bus  *bus;
+
+        pci_set_drvdata(dev, kmalloc(sizeof(struct s_i2c_chip), GFP_KERNEL)); 
+	chip = (struct s_i2c_chip *)pci_get_drvdata(dev);
+	if (chip == NULL) {
+		return -ENOMEM;
+	}
+
+	memset(chip, 0, sizeof(struct s_i2c_chip));
+
+	base = dev->resource[0].start & PCI_BASE_ADDRESS_MEM_MASK;
+	len  = dev->resource[0].end - base + 1;
+	chip->mmio = ioremap_nocache(base, len);
+
+	if (chip->mmio == NULL) {
+		dev_err(&dev->dev, "ioremap failed\n");
+		prosavage_remove(dev);
+		return -ENODEV;
+	}
+
+
+	/*
+	 * Chip initialisation
+	 */
+	/* Unlock Extended IO Space ??? */
+
+
+	/*
+	 * i2c bus registration
+	 */
+	bus = &chip->i2c_bus[0];
+	snprintf(bus->adap.name, sizeof(bus->adap.name),
+		"ProSavage I2C bus at %02x:%02x.%x",
+		dev->bus->number, PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn));
+	ret = i2c_register_bus(dev, bus, chip->mmio + 0x8000, CR_SERIAL1);
+	if (ret) {
+		goto err_adap;
+	}
+	/*
+	 * ddc bus registration
+	 */
+	bus = &chip->i2c_bus[1];
+	snprintf(bus->adap.name, sizeof(bus->adap.name),
+		"ProSavage DDC bus at %02x:%02x.%x",
+		dev->bus->number, PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn));
+	ret = i2c_register_bus(dev, bus, chip->mmio + 0x8000, CR_SERIAL2);
+	if (ret) {
+		goto err_adap;
+	}
+	return 0;
+err_adap:
+	dev_err(&dev->dev, "%s failed\n", bus->adap.name);
+	prosavage_remove(dev);
+	return ret;
+}
+
+
+/*
+ * Data for PCI driver interface
+ */
+static struct pci_device_id prosavage_pci_tbl[] = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_S3, PCI_DEVICE_ID_S3_SAVAGE4) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_S3, PCI_DEVICE_ID_S3_PROSAVAGE8) },
+	{ 0, },
+};
+
+MODULE_DEVICE_TABLE (pci, prosavage_pci_tbl);
+
+static struct pci_driver prosavage_driver = {
+	.name		=	"prosavage_smbus",
+	.id_table	=	prosavage_pci_tbl,
+	.probe		=	prosavage_probe,
+	.remove		=	prosavage_remove,
+};
+
+static int __init i2c_prosavage_init(void)
+{
+	return pci_register_driver(&prosavage_driver);
+}
+
+static void __exit i2c_prosavage_exit(void)
+{
+	pci_unregister_driver(&prosavage_driver);
+}
+
+MODULE_DEVICE_TABLE(pci, prosavage_pci_tbl);
+MODULE_AUTHOR("Henk Vergonet");
+MODULE_DESCRIPTION("ProSavage VIA 8365/8375 smbus driver");
+MODULE_LICENSE("GPL");
+
+module_init (i2c_prosavage_init);
+module_exit (i2c_prosavage_exit);
diff --git a/drivers/i2c/busses/i2c-rpx.c b/drivers/i2c/busses/i2c-rpx.c
new file mode 100644
index 00000000000..9497b1b6852
--- /dev/null
+++ b/drivers/i2c/busses/i2c-rpx.c
@@ -0,0 +1,102 @@
+/*
+ * Embedded Planet RPX Lite MPC8xx CPM I2C interface.
+ * Copyright (c) 1999 Dan Malek (dmalek@jlc.net).
+ *
+ * moved into proper i2c interface;
+ * Brad Parker (brad@heeltoe.com)
+ *
+ * RPX lite specific parts of the i2c interface
+ * Update:  There actually isn't anything RPXLite-specific about this module.
+ * This should work for most any 8xx board.  The console messages have been 
+ * changed to eliminate RPXLite references.
+ */
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/stddef.h>
+#include <linux/i2c.h>
+#include <linux/i2c-algo-8xx.h>
+#include <asm/mpc8xx.h>
+#include <asm/commproc.h>
+
+
+static void
+rpx_iic_init(struct i2c_algo_8xx_data *data)
+{
+	volatile cpm8xx_t *cp;
+	volatile immap_t *immap;
+
+	cp = cpmp;	/* Get pointer to Communication Processor */
+	immap = (immap_t *)IMAP_ADDR;	/* and to internal registers */
+
+	data->iip = (iic_t *)&cp->cp_dparam[PROFF_IIC];
+
+	/* Check for and use a microcode relocation patch.
+	*/
+	if ((data->reloc = data->iip->iic_rpbase))
+		data->iip = (iic_t *)&cp->cp_dpmem[data->iip->iic_rpbase];
+		
+	data->i2c = (i2c8xx_t *)&(immap->im_i2c);
+	data->cp = cp;
+
+	/* Initialize Port B IIC pins.
+	*/
+	cp->cp_pbpar |= 0x00000030;
+	cp->cp_pbdir |= 0x00000030;
+	cp->cp_pbodr |= 0x00000030;
+
+	/* Allocate space for two transmit and two receive buffer
+	 * descriptors in the DP ram.
+	 */
+	data->dp_addr = cpm_dpalloc(sizeof(cbd_t) * 4, 8);
+		
+	/* ptr to i2c area */
+	data->i2c = (i2c8xx_t *)&(((immap_t *)IMAP_ADDR)->im_i2c);
+}
+
+static int rpx_install_isr(int irq, void (*func)(void *, void *), void *data)
+{
+	/* install interrupt handler */
+	cpm_install_handler(irq, (void (*)(void *, struct pt_regs *)) func, data);
+
+	return 0;
+}
+
+static struct i2c_algo_8xx_data rpx_data = {
+	.setisr = rpx_install_isr
+};
+
+static struct i2c_adapter rpx_ops = {
+	.owner		= THIS_MODULE,
+	.name		= "m8xx",
+	.id		= I2C_HW_MPC8XX_EPON,
+	.algo_data	= &rpx_data,
+};
+
+int __init i2c_rpx_init(void)
+{
+	printk(KERN_INFO "i2c-rpx: i2c MPC8xx driver\n");
+
+	/* reset hardware to sane state */
+	rpx_iic_init(&rpx_data);
+
+	if (i2c_8xx_add_bus(&rpx_ops) < 0) {
+		printk(KERN_ERR "i2c-rpx: Unable to register with I2C\n");
+		return -ENODEV;
+	}
+
+	return 0;
+}
+
+void __exit i2c_rpx_exit(void)
+{
+	i2c_8xx_del_bus(&rpx_ops);
+}
+
+MODULE_AUTHOR("Dan Malek <dmalek@jlc.net>");
+MODULE_DESCRIPTION("I2C-Bus adapter routines for MPC8xx boards");
+
+module_init(i2c_rpx_init);
+module_exit(i2c_rpx_exit);
diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c
new file mode 100644
index 00000000000..fcfa51c1436
--- /dev/null
+++ b/drivers/i2c/busses/i2c-s3c2410.c
@@ -0,0 +1,938 @@
+/* linux/drivers/i2c/busses/i2c-s3c2410.c
+ *
+ * Copyright (C) 2004,2005 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2410 I2C Controller
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+*/
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+
+#include <linux/i2c.h>
+#include <linux/i2c-id.h>
+#include <linux/init.h>
+#include <linux/time.h>
+#include <linux/interrupt.h>
+#include <linux/sched.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/device.h>
+
+#include <asm/hardware.h>
+#include <asm/irq.h>
+#include <asm/io.h>
+
+#include <asm/hardware/clock.h>
+#include <asm/arch/regs-gpio.h>
+#include <asm/arch/regs-iic.h>
+#include <asm/arch/iic.h>
+
+/* i2c controller state */
+
+enum s3c24xx_i2c_state {
+	STATE_IDLE,
+	STATE_START,
+	STATE_READ,
+	STATE_WRITE,
+	STATE_STOP
+};
+
+struct s3c24xx_i2c {
+	spinlock_t		lock;
+	wait_queue_head_t	wait;
+
+	struct i2c_msg		*msg;
+	unsigned int		msg_num;
+	unsigned int		msg_idx;
+	unsigned int		msg_ptr;
+
+	enum s3c24xx_i2c_state	state;
+
+	void __iomem		*regs;
+	struct clk		*clk;
+	struct device		*dev;
+	struct resource		*irq;
+	struct resource		*ioarea;
+	struct i2c_adapter	adap;
+};
+
+/* default platform data to use if not supplied in the platform_device
+*/
+
+static struct s3c2410_platform_i2c s3c24xx_i2c_default_platform = {
+	.flags		= 0,
+	.slave_addr	= 0x10,
+	.bus_freq	= 100*1000,
+	.max_freq	= 400*1000,
+	.sda_delay	= S3C2410_IICLC_SDA_DELAY5 | S3C2410_IICLC_FILTER_ON,
+};
+
+/* s3c24xx_i2c_is2440()
+ *
+ * return true is this is an s3c2440
+*/
+
+static inline int s3c24xx_i2c_is2440(struct s3c24xx_i2c *i2c)
+{
+	struct platform_device *pdev = to_platform_device(i2c->dev);
+
+	return !strcmp(pdev->name, "s3c2440-i2c");
+}
+
+
+/* s3c24xx_i2c_get_platformdata
+ *
+ * get the platform data associated with the given device, or return
+ * the default if there is none
+*/
+
+static inline struct s3c2410_platform_i2c *s3c24xx_i2c_get_platformdata(struct device *dev)
+{
+	if (dev->platform_data != NULL)
+		return (struct s3c2410_platform_i2c *)dev->platform_data;
+
+	return &s3c24xx_i2c_default_platform;
+}
+
+/* s3c24xx_i2c_master_complete
+ *
+ * complete the message and wake up the caller, using the given return code,
+ * or zero to mean ok.
+*/
+
+static inline void s3c24xx_i2c_master_complete(struct s3c24xx_i2c *i2c, int ret)
+{
+	dev_dbg(i2c->dev, "master_complete %d\n", ret);
+
+	i2c->msg_ptr = 0;
+	i2c->msg = NULL;
+	i2c->msg_idx ++;
+	i2c->msg_num = 0;
+	if (ret)
+		i2c->msg_idx = ret;
+
+	wake_up(&i2c->wait);
+}
+
+static inline void s3c24xx_i2c_disable_ack(struct s3c24xx_i2c *i2c)
+{
+	unsigned long tmp;
+	
+	tmp = readl(i2c->regs + S3C2410_IICCON);
+	writel(tmp & ~S3C2410_IICCON_ACKEN, i2c->regs + S3C2410_IICCON);
+
+}
+
+static inline void s3c24xx_i2c_enable_ack(struct s3c24xx_i2c *i2c)
+{
+	unsigned long tmp;
+	
+	tmp = readl(i2c->regs + S3C2410_IICCON);
+	writel(tmp | S3C2410_IICCON_ACKEN, i2c->regs + S3C2410_IICCON);
+
+}
+
+/* irq enable/disable functions */
+
+static inline void s3c24xx_i2c_disable_irq(struct s3c24xx_i2c *i2c)
+{
+	unsigned long tmp;
+	
+	tmp = readl(i2c->regs + S3C2410_IICCON);
+	writel(tmp & ~S3C2410_IICCON_IRQEN, i2c->regs + S3C2410_IICCON);
+}
+
+static inline void s3c24xx_i2c_enable_irq(struct s3c24xx_i2c *i2c)
+{
+	unsigned long tmp;
+	
+	tmp = readl(i2c->regs + S3C2410_IICCON);
+	writel(tmp | S3C2410_IICCON_IRQEN, i2c->regs + S3C2410_IICCON);
+}
+
+
+/* s3c24xx_i2c_message_start
+ *
+ * put the start of a message onto the bus 
+*/
+
+static void s3c24xx_i2c_message_start(struct s3c24xx_i2c *i2c, 
+				      struct i2c_msg *msg)
+{
+	unsigned int addr = (msg->addr & 0x7f) << 1;
+	unsigned long stat;
+	unsigned long iiccon;
+
+	stat = 0;
+	stat |=  S3C2410_IICSTAT_TXRXEN;
+
+	if (msg->flags & I2C_M_RD) {
+		stat |= S3C2410_IICSTAT_MASTER_RX;
+		addr |= 1;
+	} else
+		stat |= S3C2410_IICSTAT_MASTER_TX;
+
+	if (msg->flags & I2C_M_REV_DIR_ADDR)
+		addr ^= 1;
+
+	// todo - check for wether ack wanted or not
+	s3c24xx_i2c_enable_ack(i2c);
+
+	iiccon = readl(i2c->regs + S3C2410_IICCON);
+	writel(stat, i2c->regs + S3C2410_IICSTAT);
+	
+	dev_dbg(i2c->dev, "START: %08lx to IICSTAT, %02x to DS\n", stat, addr);
+	writeb(addr, i2c->regs + S3C2410_IICDS);
+	
+	// delay a bit and reset iiccon before setting start (per samsung)
+	udelay(1);
+	dev_dbg(i2c->dev, "iiccon, %08lx\n", iiccon);
+	writel(iiccon, i2c->regs + S3C2410_IICCON);
+	
+	stat |=  S3C2410_IICSTAT_START;
+	writel(stat, i2c->regs + S3C2410_IICSTAT);
+}
+
+static inline void s3c24xx_i2c_stop(struct s3c24xx_i2c *i2c, int ret)
+{
+	unsigned long iicstat = readl(i2c->regs + S3C2410_IICSTAT);
+
+	dev_dbg(i2c->dev, "STOP\n");
+
+	/* stop the transfer */
+	iicstat &= ~ S3C2410_IICSTAT_START;
+	writel(iicstat, i2c->regs + S3C2410_IICSTAT);
+	
+	i2c->state = STATE_STOP;
+	
+	s3c24xx_i2c_master_complete(i2c, ret);
+	s3c24xx_i2c_disable_irq(i2c);
+}
+
+/* helper functions to determine the current state in the set of
+ * messages we are sending */
+
+/* is_lastmsg()
+ *
+ * returns TRUE if the current message is the last in the set 
+*/
+
+static inline int is_lastmsg(struct s3c24xx_i2c *i2c)
+{
+	return i2c->msg_idx >= (i2c->msg_num - 1);
+}
+
+/* is_msglast
+ *
+ * returns TRUE if we this is the last byte in the current message
+*/
+
+static inline int is_msglast(struct s3c24xx_i2c *i2c)
+{
+	return i2c->msg_ptr == i2c->msg->len-1;
+}
+
+/* is_msgend
+ *
+ * returns TRUE if we reached the end of the current message
+*/
+
+static inline int is_msgend(struct s3c24xx_i2c *i2c)
+{
+	return i2c->msg_ptr >= i2c->msg->len;
+}
+
+/* i2s_s3c_irq_nextbyte
+ *
+ * process an interrupt and work out what to do
+ */
+
+static int i2s_s3c_irq_nextbyte(struct s3c24xx_i2c *i2c, unsigned long iicstat)
+{
+	unsigned long tmp;
+	unsigned char byte;
+	int ret = 0;
+
+	switch (i2c->state) {
+
+	case STATE_IDLE:
+		dev_err(i2c->dev, "%s: called in STATE_IDLE\n", __FUNCTION__);
+		goto out;
+		break;
+
+	case STATE_STOP:
+		dev_err(i2c->dev, "%s: called in STATE_STOP\n", __FUNCTION__);
+		s3c24xx_i2c_disable_irq(i2c);		
+		goto out_ack;
+
+	case STATE_START:
+		/* last thing we did was send a start condition on the
+		 * bus, or started a new i2c message
+		 */
+		
+		if (iicstat  & S3C2410_IICSTAT_LASTBIT &&
+		    !(i2c->msg->flags & I2C_M_IGNORE_NAK)) {
+			/* ack was not received... */
+
+			dev_dbg(i2c->dev, "ack was not received\n");
+			s3c24xx_i2c_stop(i2c, -EREMOTEIO);
+			goto out_ack;
+		}
+
+		if (i2c->msg->flags & I2C_M_RD)
+			i2c->state = STATE_READ;
+		else
+			i2c->state = STATE_WRITE;
+
+		/* terminate the transfer if there is nothing to do
+		 * (used by the i2c probe to find devices */
+
+		if (is_lastmsg(i2c) && i2c->msg->len == 0) {
+			s3c24xx_i2c_stop(i2c, 0);
+			goto out_ack;
+		}
+
+		if (i2c->state == STATE_READ)
+			goto prepare_read;
+
+		/* fall through to the write state, as we will need to 
+		 * send a byte as well */
+
+	case STATE_WRITE:
+		/* we are writing data to the device... check for the
+		 * end of the message, and if so, work out what to do
+		 */
+
+	retry_write:
+		if (!is_msgend(i2c)) {
+			byte = i2c->msg->buf[i2c->msg_ptr++];
+			writeb(byte, i2c->regs + S3C2410_IICDS);
+			
+		} else if (!is_lastmsg(i2c)) {
+			/* we need to go to the next i2c message */
+
+			dev_dbg(i2c->dev, "WRITE: Next Message\n");
+
+			i2c->msg_ptr = 0;
+			i2c->msg_idx ++;
+			i2c->msg++;
+			
+			/* check to see if we need to do another message */
+			if (i2c->msg->flags & I2C_M_NOSTART) {
+
+				if (i2c->msg->flags & I2C_M_RD) {
+					/* cannot do this, the controller
+					 * forces us to send a new START
+					 * when we change direction */
+
+					s3c24xx_i2c_stop(i2c, -EINVAL);
+				}
+
+				goto retry_write;
+			} else {
+			
+				/* send the new start */
+				s3c24xx_i2c_message_start(i2c, i2c->msg);
+				i2c->state = STATE_START;
+			}
+
+		} else {
+			/* send stop */
+
+			s3c24xx_i2c_stop(i2c, 0);
+		}
+		break;
+
+	case STATE_READ:
+		/* we have a byte of data in the data register, do 
+		 * something with it, and then work out wether we are
+		 * going to do any more read/write
+		 */
+
+		if (!(i2c->msg->flags & I2C_M_IGNORE_NAK) &&
+		    !(is_msglast(i2c) && is_lastmsg(i2c))) {
+
+			if (iicstat & S3C2410_IICSTAT_LASTBIT) {
+				dev_dbg(i2c->dev, "READ: No Ack\n");
+
+				s3c24xx_i2c_stop(i2c, -ECONNREFUSED);
+				goto out_ack;
+			}
+		}
+
+		byte = readb(i2c->regs + S3C2410_IICDS);
+		i2c->msg->buf[i2c->msg_ptr++] = byte;
+
+	prepare_read:
+		if (is_msglast(i2c)) {
+			/* last byte of buffer */
+
+			if (is_lastmsg(i2c))
+				s3c24xx_i2c_disable_ack(i2c);
+			
+		} else if (is_msgend(i2c)) {
+			/* ok, we've read the entire buffer, see if there
+			 * is anything else we need to do */
+
+			if (is_lastmsg(i2c)) {
+				/* last message, send stop and complete */
+				dev_dbg(i2c->dev, "READ: Send Stop\n");
+
+				s3c24xx_i2c_stop(i2c, 0);
+			} else {
+				/* go to the next transfer */
+				dev_dbg(i2c->dev, "READ: Next Transfer\n");
+
+				i2c->msg_ptr = 0;
+				i2c->msg_idx++;
+				i2c->msg++;
+			}
+		}
+
+		break;
+	}
+
+	/* acknowlegde the IRQ and get back on with the work */
+
+ out_ack:
+	tmp = readl(i2c->regs + S3C2410_IICCON);	
+	tmp &= ~S3C2410_IICCON_IRQPEND;
+	writel(tmp, i2c->regs + S3C2410_IICCON);
+ out:
+	return ret;
+}
+
+/* s3c24xx_i2c_irq
+ *
+ * top level IRQ servicing routine
+*/
+
+static irqreturn_t s3c24xx_i2c_irq(int irqno, void *dev_id,
+				   struct pt_regs *regs)
+{
+	struct s3c24xx_i2c *i2c = dev_id;
+	unsigned long status;
+	unsigned long tmp;
+
+	status = readl(i2c->regs + S3C2410_IICSTAT);
+
+	if (status & S3C2410_IICSTAT_ARBITR) {
+		// deal with arbitration loss
+		dev_err(i2c->dev, "deal with arbitration loss\n");
+	}
+
+	if (i2c->state == STATE_IDLE) {
+		dev_dbg(i2c->dev, "IRQ: error i2c->state == IDLE\n");
+
+		tmp = readl(i2c->regs + S3C2410_IICCON);	
+		tmp &= ~S3C2410_IICCON_IRQPEND;
+		writel(tmp, i2c->regs +  S3C2410_IICCON);
+		goto out;
+	}
+	
+	/* pretty much this leaves us with the fact that we've
+	 * transmitted or received whatever byte we last sent */
+
+	i2s_s3c_irq_nextbyte(i2c, status);
+
+ out:
+	return IRQ_HANDLED;
+}
+
+
+/* s3c24xx_i2c_set_master
+ *
+ * get the i2c bus for a master transaction
+*/
+
+static int s3c24xx_i2c_set_master(struct s3c24xx_i2c *i2c)
+{
+	unsigned long iicstat;
+	int timeout = 400;
+
+	while (timeout-- > 0) {
+		iicstat = readl(i2c->regs + S3C2410_IICSTAT);
+		
+		if (!(iicstat & S3C2410_IICSTAT_BUSBUSY))
+			return 0;
+
+		msleep(1);
+	}
+
+	dev_dbg(i2c->dev, "timeout: GPEDAT is %08x\n",
+		__raw_readl(S3C2410_GPEDAT));
+
+	return -ETIMEDOUT;
+}
+
+/* s3c24xx_i2c_doxfer
+ *
+ * this starts an i2c transfer
+*/
+
+static int s3c24xx_i2c_doxfer(struct s3c24xx_i2c *i2c, struct i2c_msg *msgs, int num)
+{
+	unsigned long timeout;
+	int ret;
+
+	ret = s3c24xx_i2c_set_master(i2c);
+	if (ret != 0) {
+		dev_err(i2c->dev, "cannot get bus (error %d)\n", ret);
+		ret = -EAGAIN;
+		goto out;
+	}
+
+	spin_lock_irq(&i2c->lock);
+
+	i2c->msg     = msgs;
+	i2c->msg_num = num;
+	i2c->msg_ptr = 0;
+	i2c->msg_idx = 0;
+	i2c->state   = STATE_START;
+
+	s3c24xx_i2c_enable_irq(i2c);
+	s3c24xx_i2c_message_start(i2c, msgs);
+	spin_unlock_irq(&i2c->lock);
+	
+	timeout = wait_event_timeout(i2c->wait, i2c->msg_num == 0, HZ * 5);
+
+	ret = i2c->msg_idx;
+
+	/* having these next two as dev_err() makes life very 
+	 * noisy when doing an i2cdetect */
+
+	if (timeout == 0)
+		dev_dbg(i2c->dev, "timeout\n");
+	else if (ret != num)
+		dev_dbg(i2c->dev, "incomplete xfer (%d)\n", ret);
+
+	/* ensure the stop has been through the bus */
+
+	msleep(1);
+
+ out:
+	return ret;
+}
+
+/* s3c24xx_i2c_xfer
+ *
+ * first port of call from the i2c bus code when an message needs
+ * transfering across the i2c bus.
+*/
+
+static int s3c24xx_i2c_xfer(struct i2c_adapter *adap,
+			struct i2c_msg *msgs, int num)
+{
+	struct s3c24xx_i2c *i2c = (struct s3c24xx_i2c *)adap->algo_data;
+	int retry;
+	int ret;
+
+	for (retry = 0; retry < adap->retries; retry++) {
+
+		ret = s3c24xx_i2c_doxfer(i2c, msgs, num);
+
+		if (ret != -EAGAIN)
+			return ret;
+
+		dev_dbg(i2c->dev, "Retrying transmission (%d)\n", retry);
+
+		udelay(100);
+	}
+
+	return -EREMOTEIO;
+}
+
+/* declare our i2c functionality */
+static u32 s3c24xx_i2c_func(struct i2c_adapter *adap)
+{
+	return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL | I2C_FUNC_PROTOCOL_MANGLING;
+}
+
+/* i2c bus registration info */
+
+static struct i2c_algorithm s3c24xx_i2c_algorithm = {
+	.name			= "S3C2410-I2C-Algorithm",
+	.master_xfer		= s3c24xx_i2c_xfer,
+	.functionality		= s3c24xx_i2c_func,
+};
+
+static struct s3c24xx_i2c s3c24xx_i2c = {
+	.lock	= SPIN_LOCK_UNLOCKED,
+	.wait	= __WAIT_QUEUE_HEAD_INITIALIZER(s3c24xx_i2c.wait),
+	.adap	= {
+		.name			= "s3c2410-i2c",
+		.owner			= THIS_MODULE,
+		.algo			= &s3c24xx_i2c_algorithm,
+		.retries		= 2,
+		.class			= I2C_CLASS_HWMON,
+	},
+};
+
+/* s3c24xx_i2c_calcdivisor
+ *
+ * return the divisor settings for a given frequency
+*/
+
+static int s3c24xx_i2c_calcdivisor(unsigned long clkin, unsigned int wanted,
+				   unsigned int *div1, unsigned int *divs)
+{
+	unsigned int calc_divs = clkin / wanted;
+	unsigned int calc_div1;
+
+	if (calc_divs > (16*16))
+		calc_div1 = 512;
+	else
+		calc_div1 = 16;
+
+	calc_divs += calc_div1-1;
+	calc_divs /= calc_div1;
+
+	if (calc_divs == 0)
+		calc_divs = 1;
+	if (calc_divs > 17)
+		calc_divs = 17;
+
+	*divs = calc_divs;
+	*div1 = calc_div1;
+
+	return clkin / (calc_divs * calc_div1);
+}
+
+/* freq_acceptable
+ *
+ * test wether a frequency is within the acceptable range of error
+*/
+
+static inline int freq_acceptable(unsigned int freq, unsigned int wanted)
+{
+	int diff = freq - wanted;
+
+	return (diff >= -2 && diff <= 2);
+}
+
+/* s3c24xx_i2c_getdivisor
+ *
+ * work out a divisor for the user requested frequency setting,
+ * either by the requested frequency, or scanning the acceptable
+ * range of frequencies until something is found
+*/
+
+static int s3c24xx_i2c_getdivisor(struct s3c24xx_i2c *i2c,
+				  struct s3c2410_platform_i2c *pdata,
+				  unsigned long *iicon,
+				  unsigned int *got)
+{
+	unsigned long clkin = clk_get_rate(i2c->clk);
+	
+	unsigned int divs, div1;
+	int freq;
+	int start, end;
+
+	clkin /= 1000;		/* clkin now in KHz */
+     
+	dev_dbg(i2c->dev,  "pdata %p, freq %lu %lu..%lu\n",
+		 pdata, pdata->bus_freq, pdata->min_freq, pdata->max_freq);
+
+	if (pdata->bus_freq != 0) {
+		freq = s3c24xx_i2c_calcdivisor(clkin, pdata->bus_freq/1000,
+					       &div1, &divs);
+		if (freq_acceptable(freq, pdata->bus_freq/1000))
+			goto found;
+	}
+
+	/* ok, we may have to search for something suitable... */
+
+	start = (pdata->max_freq == 0) ? pdata->bus_freq : pdata->max_freq;
+	end = pdata->min_freq;
+
+	start /= 1000;
+	end /= 1000;
+
+	/* search loop... */
+
+	for (; start > end; start--) {
+		freq = s3c24xx_i2c_calcdivisor(clkin, start, &div1, &divs);
+		if (freq_acceptable(freq, start))
+			goto found;
+	}
+
+	/* cannot find frequency spec */
+
+	return -EINVAL;
+
+ found:
+	*got = freq;
+	*iicon |= (divs-1);
+	*iicon |= (div1 == 512) ? S3C2410_IICCON_TXDIV_512 : 0;
+	return 0;
+}
+
+/* s3c24xx_i2c_init
+ *
+ * initialise the controller, set the IO lines and frequency 
+*/
+
+static int s3c24xx_i2c_init(struct s3c24xx_i2c *i2c)
+{
+	unsigned long iicon = S3C2410_IICCON_IRQEN | S3C2410_IICCON_ACKEN;
+	struct s3c2410_platform_i2c *pdata;
+	unsigned int freq;
+
+	/* get the plafrom data */
+
+	pdata = s3c24xx_i2c_get_platformdata(i2c->adap.dev.parent);
+
+	/* inititalise the gpio */
+
+	s3c2410_gpio_cfgpin(S3C2410_GPE15, S3C2410_GPE15_IICSDA);
+	s3c2410_gpio_cfgpin(S3C2410_GPE14, S3C2410_GPE14_IICSCL);
+
+	/* write slave address */
+	
+	writeb(pdata->slave_addr, i2c->regs + S3C2410_IICADD);
+
+	dev_info(i2c->dev, "slave address 0x%02x\n", pdata->slave_addr);
+
+	/* we need to work out the divisors for the clock... */
+
+	if (s3c24xx_i2c_getdivisor(i2c, pdata, &iicon, &freq) != 0) {
+		dev_err(i2c->dev, "cannot meet bus frequency required\n");
+		return -EINVAL;
+	}
+
+	/* todo - check that the i2c lines aren't being dragged anywhere */
+
+	dev_info(i2c->dev, "bus frequency set to %d KHz\n", freq);
+	dev_dbg(i2c->dev, "S3C2410_IICCON=0x%02lx\n", iicon);
+	
+	writel(iicon, i2c->regs + S3C2410_IICCON);
+
+	/* check for s3c2440 i2c controller  */
+
+	if (s3c24xx_i2c_is2440(i2c)) {
+		dev_dbg(i2c->dev, "S3C2440_IICLC=%08x\n", pdata->sda_delay);
+
+		writel(pdata->sda_delay, i2c->regs + S3C2440_IICLC);
+	}
+
+	return 0;
+}
+
+static void s3c24xx_i2c_free(struct s3c24xx_i2c *i2c)
+{
+	if (i2c->clk != NULL && !IS_ERR(i2c->clk)) {
+		clk_disable(i2c->clk);
+		clk_unuse(i2c->clk);
+		clk_put(i2c->clk);
+		i2c->clk = NULL;
+	}
+
+	if (i2c->regs != NULL) {
+		iounmap(i2c->regs);
+		i2c->regs = NULL;
+	}
+
+	if (i2c->ioarea != NULL) {
+		release_resource(i2c->ioarea);
+		kfree(i2c->ioarea);
+		i2c->ioarea = NULL;
+	}
+}
+
+/* s3c24xx_i2c_probe
+ *
+ * called by the bus driver when a suitable device is found
+*/
+
+static int s3c24xx_i2c_probe(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct s3c24xx_i2c *i2c = &s3c24xx_i2c;
+	struct resource *res;
+	int ret;
+
+	/* find the clock and enable it */
+
+	i2c->dev = dev;
+	i2c->clk = clk_get(dev, "i2c");
+	if (IS_ERR(i2c->clk)) {
+		dev_err(dev, "cannot get clock\n");
+		ret = -ENOENT;
+		goto out;
+	}
+
+	dev_dbg(dev, "clock source %p\n", i2c->clk);
+
+	clk_use(i2c->clk);
+	clk_enable(i2c->clk);
+
+	/* map the registers */
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (res == NULL) {
+		dev_err(dev, "cannot find IO resource\n");
+		ret = -ENOENT;
+		goto out;
+	}
+
+	i2c->ioarea = request_mem_region(res->start, (res->end-res->start)+1,
+					 pdev->name);
+
+	if (i2c->ioarea == NULL) {
+		dev_err(dev, "cannot request IO\n");
+		ret = -ENXIO;
+		goto out;
+	}
+
+	i2c->regs = ioremap(res->start, (res->end-res->start)+1);
+
+	if (i2c->regs == NULL) {
+		dev_err(dev, "cannot map IO\n");
+		ret = -ENXIO;
+		goto out;
+	}
+
+	dev_dbg(dev, "registers %p (%p, %p)\n", i2c->regs, i2c->ioarea, res);
+
+	/* setup info block for the i2c core */
+
+	i2c->adap.algo_data = i2c;
+	i2c->adap.dev.parent = dev;
+
+	/* initialise the i2c controller */
+
+	ret = s3c24xx_i2c_init(i2c);
+	if (ret != 0)
+		goto out;
+
+	/* find the IRQ for this unit (note, this relies on the init call to
+	 * ensure no current IRQs pending 
+	 */
+
+	res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+	if (res == NULL) {
+		dev_err(dev, "cannot find IRQ\n");
+		ret = -ENOENT;
+		goto out;
+	}
+
+	ret = request_irq(res->start, s3c24xx_i2c_irq, SA_INTERRUPT,
+			  pdev->name, i2c);
+
+	if (ret != 0) {
+		dev_err(dev, "cannot claim IRQ\n");
+		goto out;
+	}
+
+	i2c->irq = res;
+		
+	dev_dbg(dev, "irq resource %p (%ld)\n", res, res->start);
+
+	ret = i2c_add_adapter(&i2c->adap);
+	if (ret < 0) {
+		dev_err(dev, "failed to add bus to i2c core\n");
+		goto out;
+	}
+
+	dev_set_drvdata(dev, i2c);
+
+	dev_info(dev, "%s: S3C I2C adapter\n", i2c->adap.dev.bus_id);
+
+ out:
+	if (ret < 0)
+		s3c24xx_i2c_free(i2c);
+
+	return ret;
+}
+
+/* s3c24xx_i2c_remove
+ *
+ * called when device is removed from the bus
+*/
+
+static int s3c24xx_i2c_remove(struct device *dev)
+{
+	struct s3c24xx_i2c *i2c = dev_get_drvdata(dev);
+	
+	if (i2c != NULL) {
+		s3c24xx_i2c_free(i2c);
+		dev_set_drvdata(dev, NULL);
+	}
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int s3c24xx_i2c_resume(struct device *dev, u32 level)
+{
+	struct s3c24xx_i2c *i2c = dev_get_drvdata(dev);
+	
+	if (i2c != NULL && level == RESUME_ENABLE) {
+		dev_dbg(dev, "resume: level %d\n", level);
+		s3c24xx_i2c_init(i2c);
+	}
+
+	return 0;
+}
+
+#else
+#define s3c24xx_i2c_resume NULL
+#endif
+
+/* device driver for platform bus bits */
+
+static struct device_driver s3c2410_i2c_driver = {
+	.name		= "s3c2410-i2c",
+	.bus		= &platform_bus_type,
+	.probe		= s3c24xx_i2c_probe,
+	.remove		= s3c24xx_i2c_remove,
+	.resume		= s3c24xx_i2c_resume,
+};
+
+static struct device_driver s3c2440_i2c_driver = {
+	.name		= "s3c2440-i2c",
+	.bus		= &platform_bus_type,
+	.probe		= s3c24xx_i2c_probe,
+	.remove		= s3c24xx_i2c_remove,
+	.resume		= s3c24xx_i2c_resume,
+};
+
+static int __init i2c_adap_s3c_init(void)
+{
+	int ret;
+
+	ret = driver_register(&s3c2410_i2c_driver);
+	if (ret == 0)
+		ret = driver_register(&s3c2440_i2c_driver); 
+
+	return ret;
+}
+
+static void __exit i2c_adap_s3c_exit(void)
+{
+	driver_unregister(&s3c2410_i2c_driver);
+	driver_unregister(&s3c2440_i2c_driver);
+}
+
+module_init(i2c_adap_s3c_init);
+module_exit(i2c_adap_s3c_exit);
+
+MODULE_DESCRIPTION("S3C24XX I2C Bus driver");
+MODULE_AUTHOR("Ben Dooks, <ben@simtec.co.uk>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/i2c/busses/i2c-savage4.c b/drivers/i2c/busses/i2c-savage4.c
new file mode 100644
index 00000000000..092d0323c6c
--- /dev/null
+++ b/drivers/i2c/busses/i2c-savage4.c
@@ -0,0 +1,205 @@
+/*
+    i2c-savage4.c - Part of lm_sensors, Linux kernel modules for hardware
+              monitoring
+    Copyright (C) 1998-2003  The LM Sensors Team
+    Alexander Wold <awold@bigfoot.com>
+    Mark D. Studebaker <mdsxyz123@yahoo.com>
+    
+    Based on i2c-voodoo3.c.
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+/* This interfaces to the I2C bus of the Savage4 to gain access to
+   the BT869 and possibly other I2C devices. The DDC bus is not
+   yet supported because its register is not memory-mapped.
+   However we leave the DDC code here, commented out, to make
+   it easier to add later.
+*/
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/i2c.h>
+#include <linux/i2c-algo-bit.h>
+#include <asm/io.h>
+
+/* 3DFX defines */
+#define PCI_CHIP_SAVAGE3D	0x8A20
+#define PCI_CHIP_SAVAGE3D_MV	0x8A21
+#define PCI_CHIP_SAVAGE4	0x8A22
+#define PCI_CHIP_SAVAGE2000	0x9102
+#define PCI_CHIP_PROSAVAGE_PM	0x8A25
+#define PCI_CHIP_PROSAVAGE_KM	0x8A26
+#define PCI_CHIP_SAVAGE_MX_MV	0x8c10
+#define PCI_CHIP_SAVAGE_MX	0x8c11
+#define PCI_CHIP_SAVAGE_IX_MV	0x8c12
+#define PCI_CHIP_SAVAGE_IX	0x8c13
+
+#define REG			0xff20	/* Serial Port 1 Register */
+
+/* bit locations in the register */
+#define DDC_ENAB		0x00040000
+#define DDC_SCL_OUT		0x00080000
+#define DDC_SDA_OUT		0x00100000
+#define DDC_SCL_IN		0x00200000
+#define DDC_SDA_IN		0x00400000
+#define I2C_ENAB		0x00000020
+#define I2C_SCL_OUT		0x00000001
+#define I2C_SDA_OUT		0x00000002
+#define I2C_SCL_IN		0x00000008
+#define I2C_SDA_IN		0x00000010
+
+/* initialization states */
+#define INIT2			0x20
+#define INIT3			0x04
+
+/* delays */
+#define CYCLE_DELAY		10
+#define TIMEOUT			(HZ / 2)
+
+
+static void __iomem *ioaddr;
+
+/* The sav GPIO registers don't have individual masks for each bit
+   so we always have to read before writing. */
+
+static void bit_savi2c_setscl(void *data, int val)
+{
+	unsigned int r;
+	r = readl(ioaddr + REG);
+	if(val)
+		r |= I2C_SCL_OUT;
+	else
+		r &= ~I2C_SCL_OUT;
+	writel(r, ioaddr + REG);
+	readl(ioaddr + REG);	/* flush posted write */
+}
+
+static void bit_savi2c_setsda(void *data, int val)
+{
+	unsigned int r;
+	r = readl(ioaddr + REG);
+	if(val)
+		r |= I2C_SDA_OUT;
+	else
+		r &= ~I2C_SDA_OUT;
+	writel(r, ioaddr + REG);
+	readl(ioaddr + REG);	/* flush posted write */
+}
+
+/* The GPIO pins are open drain, so the pins always remain outputs.
+   We rely on the i2c-algo-bit routines to set the pins high before
+   reading the input from other chips. */
+
+static int bit_savi2c_getscl(void *data)
+{
+	return (0 != (readl(ioaddr + REG) & I2C_SCL_IN));
+}
+
+static int bit_savi2c_getsda(void *data)
+{
+	return (0 != (readl(ioaddr + REG) & I2C_SDA_IN));
+}
+
+/* Configures the chip */
+
+static int config_s4(struct pci_dev *dev)
+{
+	unsigned long cadr;
+
+	/* map memory */
+	cadr = dev->resource[0].start;
+	cadr &= PCI_BASE_ADDRESS_MEM_MASK;
+	ioaddr = ioremap_nocache(cadr, 0x0080000);
+	if (ioaddr) {
+		/* writel(0x8160, ioaddr + REG2); */
+		writel(0x00000020, ioaddr + REG);
+		dev_info(&dev->dev, "Using Savage4 at %p\n", ioaddr);
+		return 0;
+	}
+	return -ENODEV;
+}
+
+static struct i2c_algo_bit_data sav_i2c_bit_data = {
+	.setsda		= bit_savi2c_setsda,
+	.setscl		= bit_savi2c_setscl,
+	.getsda		= bit_savi2c_getsda,
+	.getscl		= bit_savi2c_getscl,
+	.udelay		= CYCLE_DELAY,
+	.mdelay		= CYCLE_DELAY,
+	.timeout	= TIMEOUT
+};
+
+static struct i2c_adapter savage4_i2c_adapter = {
+	.owner		= THIS_MODULE,
+	.name		= "I2C Savage4 adapter",
+	.algo_data	= &sav_i2c_bit_data,
+};
+
+static struct pci_device_id savage4_ids[] __devinitdata = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_S3, PCI_CHIP_SAVAGE4) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_S3, PCI_CHIP_SAVAGE2000) },
+	{ 0, }
+};
+
+MODULE_DEVICE_TABLE (pci, savage4_ids);
+
+static int __devinit savage4_probe(struct pci_dev *dev, const struct pci_device_id *id)
+{
+	int retval;
+
+	retval = config_s4(dev);
+	if (retval)
+		return retval;
+
+	/* set up the sysfs linkage to our parent device */
+	savage4_i2c_adapter.dev.parent = &dev->dev;
+
+	return i2c_bit_add_bus(&savage4_i2c_adapter);
+}
+
+static void __devexit savage4_remove(struct pci_dev *dev)
+{
+	i2c_bit_del_bus(&savage4_i2c_adapter);
+	iounmap(ioaddr);
+}
+
+static struct pci_driver savage4_driver = {
+	.name		= "savage4_smbus",
+	.id_table	= savage4_ids,
+	.probe		= savage4_probe,
+	.remove		= __devexit_p(savage4_remove),
+};
+
+static int __init i2c_savage4_init(void)
+{
+	return pci_register_driver(&savage4_driver);
+}
+
+static void __exit i2c_savage4_exit(void)
+{
+	pci_unregister_driver(&savage4_driver);
+}
+
+MODULE_AUTHOR("Alexander Wold <awold@bigfoot.com> "
+		"and Mark D. Studebaker <mdsxyz123@yahoo.com>");
+MODULE_DESCRIPTION("Savage4 I2C/SMBus driver");
+MODULE_LICENSE("GPL");
+
+module_init(i2c_savage4_init);
+module_exit(i2c_savage4_exit);
diff --git a/drivers/i2c/busses/i2c-sibyte.c b/drivers/i2c/busses/i2c-sibyte.c
new file mode 100644
index 00000000000..e5dd90bdb04
--- /dev/null
+++ b/drivers/i2c/busses/i2c-sibyte.c
@@ -0,0 +1,71 @@
+/*
+ * Copyright (C) 2004 Steven J. Hill
+ * Copyright (C) 2001,2002,2003 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/i2c-algo-sibyte.h>
+#include <asm/sibyte/sb1250_regs.h>
+#include <asm/sibyte/sb1250_smbus.h>
+
+static struct i2c_algo_sibyte_data sibyte_board_data[2] = {
+	{ NULL, 0, (void *) (KSEG1+A_SMB_BASE(0)) },
+	{ NULL, 1, (void *) (KSEG1+A_SMB_BASE(1)) }
+};
+
+static struct i2c_adapter sibyte_board_adapter[2] = {
+	{
+		.owner		= THIS_MODULE,
+		.id		= I2C_HW_SIBYTE,
+		.class		= I2C_CLASS_HWMON,
+		.algo		= NULL,
+		.algo_data	= &sibyte_board_data[0],
+		.name		= "SiByte SMBus 0",
+	},
+	{
+		.owner		= THIS_MODULE,
+		.id		= I2C_HW_SIBYTE,
+		.class		= I2C_CLASS_HWMON,
+		.algo		= NULL,
+		.algo_data	= &sibyte_board_data[1],
+		.name		= "SiByte SMBus 1",
+	},
+};
+
+static int __init i2c_sibyte_init(void)
+{
+	printk("i2c-swarm.o: i2c SMBus adapter module for SiByte board\n");
+	if (i2c_sibyte_add_bus(&sibyte_board_adapter[0], K_SMB_FREQ_100KHZ) < 0)
+		return -ENODEV;
+	if (i2c_sibyte_add_bus(&sibyte_board_adapter[1], K_SMB_FREQ_400KHZ) < 0)
+		return -ENODEV;
+	return 0;
+}
+
+static void __exit i2c_sibyte_exit(void)
+{
+	i2c_sibyte_del_bus(&sibyte_board_adapter[0]);
+	i2c_sibyte_del_bus(&sibyte_board_adapter[1]);
+}
+
+module_init(i2c_sibyte_init);
+module_exit(i2c_sibyte_exit);
+
+MODULE_AUTHOR("Kip Walker <kwalker@broadcom.com>, Steven J. Hill <sjhill@realitydiluted.com>");
+MODULE_DESCRIPTION("SMBus adapter routines for SiByte boards");
+MODULE_LICENSE("GPL");
diff --git a/drivers/i2c/busses/i2c-sis5595.c b/drivers/i2c/busses/i2c-sis5595.c
new file mode 100644
index 00000000000..425733b019b
--- /dev/null
+++ b/drivers/i2c/busses/i2c-sis5595.c
@@ -0,0 +1,424 @@
+/*
+    sis5595.c - Part of lm_sensors, Linux kernel modules for hardware
+              monitoring
+    Copyright (c) 1998, 1999  Frodo Looijaard <frodol@dds.nl> and
+    Philip Edelbrock <phil@netroedge.com>
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+/* Note: we assume there can only be one SIS5595 with one SMBus interface */
+
+/*
+   Note: all have mfr. ID 0x1039.
+   SUPPORTED		PCI ID		
+	5595		0008
+
+   Note: these chips contain a 0008 device which is incompatible with the
+         5595. We recognize these by the presence of the listed
+         "blacklist" PCI ID and refuse to load.
+
+   NOT SUPPORTED	PCI ID		BLACKLIST PCI ID	
+	 540		0008		0540
+	 550		0008		0550
+	5513		0008		5511
+	5581		0008		5597
+	5582		0008		5597
+	5597		0008		5597
+	5598		0008		5597/5598
+	 630		0008		0630
+	 645		0008		0645
+	 646		0008		0646
+	 648		0008		0648
+	 650		0008		0650
+	 651		0008		0651
+	 730		0008		0730
+	 735		0008		0735
+	 745		0008		0745
+	 746		0008		0746
+*/
+
+/* TO DO: 
+ * Add Block Transfers (ugly, but supported by the adapter)
+ * Add adapter resets
+ */
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/pci.h>
+#include <linux/ioport.h>
+#include <linux/init.h>
+#include <linux/i2c.h>
+#include <asm/io.h>
+
+static int blacklist[] = {
+	PCI_DEVICE_ID_SI_540,
+	PCI_DEVICE_ID_SI_550,
+	PCI_DEVICE_ID_SI_630,
+	PCI_DEVICE_ID_SI_645,
+	PCI_DEVICE_ID_SI_646,
+	PCI_DEVICE_ID_SI_648,
+	PCI_DEVICE_ID_SI_650,
+	PCI_DEVICE_ID_SI_651,
+	PCI_DEVICE_ID_SI_730,
+	PCI_DEVICE_ID_SI_735,
+	PCI_DEVICE_ID_SI_745,
+	PCI_DEVICE_ID_SI_746,
+	PCI_DEVICE_ID_SI_5511,	/* 5513 chip has the 0008 device but that ID
+				   shows up in other chips so we use the 5511
+				   ID for recognition */
+	PCI_DEVICE_ID_SI_5597,
+	PCI_DEVICE_ID_SI_5598,
+	0,			/* terminates the list */
+};
+
+/* Length of ISA address segment */
+#define SIS5595_EXTENT		8
+/* SIS5595 SMBus registers */
+#define SMB_STS_LO		0x00
+#define SMB_STS_HI		0x01
+#define SMB_CTL_LO		0x02
+#define SMB_CTL_HI		0x03
+#define SMB_ADDR		0x04
+#define SMB_CMD			0x05
+#define SMB_PCNT		0x06
+#define SMB_CNT			0x07
+#define SMB_BYTE		0x08
+#define SMB_DEV			0x10
+#define SMB_DB0			0x11
+#define SMB_DB1			0x12
+#define SMB_HAA			0x13
+
+/* PCI Address Constants */
+#define SMB_INDEX		0x38
+#define SMB_DAT			0x39
+#define SIS5595_ENABLE_REG	0x40
+#define ACPI_BASE		0x90
+
+/* Other settings */
+#define MAX_TIMEOUT		500
+
+/* SIS5595 constants */
+#define SIS5595_QUICK		0x00
+#define SIS5595_BYTE		0x02
+#define SIS5595_BYTE_DATA	0x04
+#define SIS5595_WORD_DATA	0x06
+#define SIS5595_PROC_CALL	0x08
+#define SIS5595_BLOCK_DATA	0x0A
+
+/* insmod parameters */
+
+/* If force_addr is set to anything different from 0, we forcibly enable
+   the device at the given address. */
+static u16 force_addr = 0;
+module_param(force_addr, ushort, 0);
+MODULE_PARM_DESC(force_addr, "Initialize the base address of the i2c controller");
+
+static unsigned short sis5595_base = 0;
+
+static u8 sis5595_read(u8 reg)
+{
+	outb(reg, sis5595_base + SMB_INDEX);
+	return inb(sis5595_base + SMB_DAT);
+}
+
+static void sis5595_write(u8 reg, u8 data)
+{
+	outb(reg, sis5595_base + SMB_INDEX);
+	outb(data, sis5595_base + SMB_DAT);
+}
+
+static int sis5595_setup(struct pci_dev *SIS5595_dev)
+{
+	u16 a;
+	u8 val;
+	int *i;
+	int retval = -ENODEV;
+
+	/* Look for imposters */
+	for (i = blacklist; *i != 0; i++) {
+		struct pci_dev *dev;
+		dev = pci_get_device(PCI_VENDOR_ID_SI, *i, NULL);
+		if (dev) {
+			dev_err(&SIS5595_dev->dev, "Looked for SIS5595 but found unsupported device %.4x\n", *i);
+			pci_dev_put(dev);
+			return -ENODEV;
+		}
+	}
+
+	/* Determine the address of the SMBus areas */
+	pci_read_config_word(SIS5595_dev, ACPI_BASE, &sis5595_base);
+	if (sis5595_base == 0 && force_addr == 0) {
+		dev_err(&SIS5595_dev->dev, "ACPI base address uninitialized - upgrade BIOS or use force_addr=0xaddr\n");
+		return -ENODEV;
+	}
+
+	if (force_addr)
+		sis5595_base = force_addr & ~(SIS5595_EXTENT - 1);
+	dev_dbg(&SIS5595_dev->dev, "ACPI Base address: %04x\n", sis5595_base);
+
+	/* NB: We grab just the two SMBus registers here, but this may still
+	 * interfere with ACPI :-(  */
+	if (!request_region(sis5595_base + SMB_INDEX, 2, "sis5595-smbus")) {
+		dev_err(&SIS5595_dev->dev, "SMBus registers 0x%04x-0x%04x already in use!\n",
+			sis5595_base + SMB_INDEX, sis5595_base + SMB_INDEX + 1);
+		return -ENODEV;
+	}
+
+	if (force_addr) {
+		dev_info(&SIS5595_dev->dev, "forcing ISA address 0x%04X\n", sis5595_base);
+		if (pci_write_config_word(SIS5595_dev, ACPI_BASE, sis5595_base)
+		    != PCIBIOS_SUCCESSFUL)
+			goto error;
+		if (pci_read_config_word(SIS5595_dev, ACPI_BASE, &a)
+		    != PCIBIOS_SUCCESSFUL)
+			goto error;
+		if ((a & ~(SIS5595_EXTENT - 1)) != sis5595_base) {
+			/* doesn't work for some chips! */
+			dev_err(&SIS5595_dev->dev, "force address failed - not supported?\n");
+			goto error;
+		}
+	}
+
+	if (pci_read_config_byte(SIS5595_dev, SIS5595_ENABLE_REG, &val)
+	    != PCIBIOS_SUCCESSFUL)
+		goto error;
+	if ((val & 0x80) == 0) {
+		dev_info(&SIS5595_dev->dev, "enabling ACPI\n");
+		if (pci_write_config_byte(SIS5595_dev, SIS5595_ENABLE_REG, val | 0x80)
+		    != PCIBIOS_SUCCESSFUL)
+			goto error;
+		if (pci_read_config_byte(SIS5595_dev, SIS5595_ENABLE_REG, &val)
+		    != PCIBIOS_SUCCESSFUL)
+			goto error;
+		if ((val & 0x80) == 0) {
+			/* doesn't work for some chips? */
+			dev_err(&SIS5595_dev->dev, "ACPI enable failed - not supported?\n");
+			goto error;
+		}
+	}
+
+	/* Everything is happy */
+	return 0;
+
+error:
+	release_region(sis5595_base + SMB_INDEX, 2);
+	return retval;
+}
+
+static int sis5595_transaction(struct i2c_adapter *adap)
+{
+	int temp;
+	int result = 0;
+	int timeout = 0;
+
+	/* Make sure the SMBus host is ready to start transmitting */
+	temp = sis5595_read(SMB_STS_LO) + (sis5595_read(SMB_STS_HI) << 8);
+	if (temp != 0x00) {
+		dev_dbg(&adap->dev, "SMBus busy (%04x). Resetting... \n", temp);
+		sis5595_write(SMB_STS_LO, temp & 0xff);
+		sis5595_write(SMB_STS_HI, temp >> 8);
+		if ((temp = sis5595_read(SMB_STS_LO) + (sis5595_read(SMB_STS_HI) << 8)) != 0x00) {
+			dev_dbg(&adap->dev, "Failed! (%02x)\n", temp);
+			return -1;
+		} else {
+			dev_dbg(&adap->dev, "Successfull!\n");
+		}
+	}
+
+	/* start the transaction by setting bit 4 */
+	sis5595_write(SMB_CTL_LO, sis5595_read(SMB_CTL_LO) | 0x10);
+
+	/* We will always wait for a fraction of a second! */
+	do {
+		msleep(1);
+		temp = sis5595_read(SMB_STS_LO);
+	} while (!(temp & 0x40) && (timeout++ < MAX_TIMEOUT));
+
+	/* If the SMBus is still busy, we give up */
+	if (timeout >= MAX_TIMEOUT) {
+		dev_dbg(&adap->dev, "SMBus Timeout!\n");
+		result = -1;
+	}
+
+	if (temp & 0x10) {
+		dev_dbg(&adap->dev, "Error: Failed bus transaction\n");
+		result = -1;
+	}
+
+	if (temp & 0x20) {
+		dev_err(&adap->dev, "Bus collision! SMBus may be locked until "
+			"next hard reset (or not...)\n");
+		/* Clock stops and slave is stuck in mid-transmission */
+		result = -1;
+	}
+
+	temp = sis5595_read(SMB_STS_LO) + (sis5595_read(SMB_STS_HI) << 8);
+	if (temp != 0x00) {
+		sis5595_write(SMB_STS_LO, temp & 0xff);
+		sis5595_write(SMB_STS_HI, temp >> 8);
+	}
+
+	temp = sis5595_read(SMB_STS_LO) + (sis5595_read(SMB_STS_HI) << 8);
+	if (temp != 0x00)
+		dev_dbg(&adap->dev, "Failed reset at end of transaction (%02x)\n", temp);
+
+	return result;
+}
+
+/* Return -1 on error. */
+static s32 sis5595_access(struct i2c_adapter *adap, u16 addr,
+			  unsigned short flags, char read_write,
+			  u8 command, int size, union i2c_smbus_data *data)
+{
+	switch (size) {
+	case I2C_SMBUS_QUICK:
+		sis5595_write(SMB_ADDR, ((addr & 0x7f) << 1) | (read_write & 0x01));
+		size = SIS5595_QUICK;
+		break;
+	case I2C_SMBUS_BYTE:
+		sis5595_write(SMB_ADDR, ((addr & 0x7f) << 1) | (read_write & 0x01));
+		if (read_write == I2C_SMBUS_WRITE)
+			sis5595_write(SMB_CMD, command);
+		size = SIS5595_BYTE;
+		break;
+	case I2C_SMBUS_BYTE_DATA:
+		sis5595_write(SMB_ADDR, ((addr & 0x7f) << 1) | (read_write & 0x01));
+		sis5595_write(SMB_CMD, command);
+		if (read_write == I2C_SMBUS_WRITE)
+			sis5595_write(SMB_BYTE, data->byte);
+		size = SIS5595_BYTE_DATA;
+		break;
+	case I2C_SMBUS_PROC_CALL:
+	case I2C_SMBUS_WORD_DATA:
+		sis5595_write(SMB_ADDR, ((addr & 0x7f) << 1) | (read_write & 0x01));
+		sis5595_write(SMB_CMD, command);
+		if (read_write == I2C_SMBUS_WRITE) {
+			sis5595_write(SMB_BYTE, data->word & 0xff);
+			sis5595_write(SMB_BYTE + 1,
+				      (data->word & 0xff00) >> 8);
+		}
+		size = (size == I2C_SMBUS_PROC_CALL) ? SIS5595_PROC_CALL : SIS5595_WORD_DATA;
+		break;
+/*
+	case I2C_SMBUS_BLOCK_DATA:
+		printk(KERN_WARNING "sis5595.o: Block data not yet implemented!\n");
+		return -1;
+		break;
+*/
+	default:
+		printk(KERN_WARNING "sis5595.o: Unsupported transaction %d\n", size);
+		return -1;
+	}
+
+	sis5595_write(SMB_CTL_LO, ((size & 0x0E)));
+
+	if (sis5595_transaction(adap))
+		return -1;
+
+	if ((size != SIS5595_PROC_CALL) &&
+	    ((read_write == I2C_SMBUS_WRITE) || (size == SIS5595_QUICK)))
+		return 0;
+
+
+	switch (size) {
+	case SIS5595_BYTE:	/* Where is the result put? I assume here it is in
+				   SMB_DATA but it might just as well be in the
+				   SMB_CMD. No clue in the docs */
+	case SIS5595_BYTE_DATA:
+		data->byte = sis5595_read(SMB_BYTE);
+		break;
+	case SIS5595_WORD_DATA:
+	case SIS5595_PROC_CALL:
+		data->word = sis5595_read(SMB_BYTE) + (sis5595_read(SMB_BYTE + 1) << 8);
+		break;
+	}
+	return 0;
+}
+
+static u32 sis5595_func(struct i2c_adapter *adapter)
+{
+	return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE |
+	    I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA |
+	    I2C_FUNC_SMBUS_PROC_CALL;
+}
+
+static struct i2c_algorithm smbus_algorithm = {
+	.name		= "Non-I2C SMBus adapter",
+	.id		= I2C_ALGO_SMBUS,
+	.smbus_xfer	= sis5595_access,
+	.functionality	= sis5595_func,
+};
+
+static struct i2c_adapter sis5595_adapter = {
+	.owner		= THIS_MODULE,
+	.class          = I2C_CLASS_HWMON,
+	.name		= "unset",
+	.algo		= &smbus_algorithm,
+};
+
+static struct pci_device_id sis5595_ids[] __devinitdata = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_503) }, 
+	{ 0, }
+};
+
+MODULE_DEVICE_TABLE (pci, sis5595_ids);
+
+static int __devinit sis5595_probe(struct pci_dev *dev, const struct pci_device_id *id)
+{
+	if (sis5595_setup(dev)) {
+		dev_err(&dev->dev, "SIS5595 not detected, module not inserted.\n");
+		return -ENODEV;
+	}
+
+	/* set up the driverfs linkage to our parent device */
+	sis5595_adapter.dev.parent = &dev->dev;
+
+	sprintf(sis5595_adapter.name, "SMBus SIS5595 adapter at %04x",
+		sis5595_base + SMB_INDEX);
+	return i2c_add_adapter(&sis5595_adapter);
+}
+
+static void __devexit sis5595_remove(struct pci_dev *dev)
+{
+	i2c_del_adapter(&sis5595_adapter);
+	release_region(sis5595_base + SMB_INDEX, 2);
+}
+
+static struct pci_driver sis5595_driver = {
+	.name		= "sis5595_smbus",
+	.id_table	= sis5595_ids,
+	.probe		= sis5595_probe,
+	.remove		= __devexit_p(sis5595_remove),
+};
+
+static int __init i2c_sis5595_init(void)
+{
+	return pci_register_driver(&sis5595_driver);
+}
+
+static void __exit i2c_sis5595_exit(void)
+{
+	pci_unregister_driver(&sis5595_driver);
+}
+
+MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl>");
+MODULE_DESCRIPTION("SIS5595 SMBus driver");
+MODULE_LICENSE("GPL");
+
+module_init(i2c_sis5595_init);
+module_exit(i2c_sis5595_exit);
diff --git a/drivers/i2c/busses/i2c-sis630.c b/drivers/i2c/busses/i2c-sis630.c
new file mode 100644
index 00000000000..58df63df154
--- /dev/null
+++ b/drivers/i2c/busses/i2c-sis630.c
@@ -0,0 +1,523 @@
+/*
+    i2c-sis630.c - Part of lm_sensors, Linux kernel modules for hardware
+              monitoring
+
+    Copyright (c) 2002,2003 Alexander Malysh <amalysh@web.de>
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+/*
+   Changes:
+   24.08.2002
+   	Fixed the typo in sis630_access (Thanks to Mark M. Hoffman)
+	Changed sis630_transaction.(Thanks to Mark M. Hoffman)
+   18.09.2002
+	Added SIS730 as supported.
+   21.09.2002
+	Added high_clock module option.If this option is set
+	used Host Master Clock 56KHz (default 14KHz).For now we save old Host
+	Master Clock and after transaction completed restore (otherwise
+	it's confuse BIOS and hung Machine).
+   24.09.2002
+	Fixed typo in sis630_access
+	Fixed logical error by restoring of Host Master Clock
+   31.07.2003
+   	Added block data read/write support.
+*/
+
+/*
+   Status: beta
+
+   Supports:
+	SIS 630
+	SIS 730
+
+   Note: we assume there can only be one device, with one SMBus interface.
+*/
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/pci.h>
+#include <linux/ioport.h>
+#include <linux/init.h>
+#include <linux/i2c.h>
+#include <asm/io.h>
+
+/* SIS630 SMBus registers */
+#define SMB_STS			0x80	/* status */
+#define SMB_EN			0x81	/* status enable */
+#define SMB_CNT			0x82
+#define SMBHOST_CNT		0x83
+#define SMB_ADDR		0x84
+#define SMB_CMD			0x85
+#define SMB_PCOUNT		0x86	/* processed count */
+#define SMB_COUNT		0x87
+#define SMB_BYTE		0x88	/* ~0x8F data byte field */
+#define SMBDEV_ADDR		0x90
+#define SMB_DB0			0x91
+#define SMB_DB1			0x92
+#define SMB_SAA			0x93
+
+/* register count for request_region */
+#define SIS630_SMB_IOREGION	20
+
+/* PCI address constants */
+/* acpi base address register  */
+#define SIS630_ACPI_BASE_REG	0x74
+/* bios control register */
+#define SIS630_BIOS_CTL_REG	0x40
+
+/* Other settings */
+#define MAX_TIMEOUT		500
+
+/* SIS630 constants */
+#define SIS630_QUICK		0x00
+#define SIS630_BYTE		0x01
+#define SIS630_BYTE_DATA	0x02
+#define SIS630_WORD_DATA	0x03
+#define SIS630_PCALL		0x04
+#define SIS630_BLOCK_DATA	0x05
+
+/* insmod parameters */
+static int high_clock;
+static int force;
+module_param(high_clock, bool, 0);
+MODULE_PARM_DESC(high_clock, "Set Host Master Clock to 56KHz (default 14KHz).");
+module_param(force, bool, 0);
+MODULE_PARM_DESC(force, "Forcibly enable the SIS630. DANGEROUS!");
+
+/* acpi base address */
+static unsigned short acpi_base = 0;
+
+/* supported chips */
+static int supported[] = {
+	PCI_DEVICE_ID_SI_630,
+	PCI_DEVICE_ID_SI_730,
+	0 /* terminates the list */
+};
+
+static inline u8 sis630_read(u8 reg)
+{
+	return inb(acpi_base + reg);
+}
+
+static inline void sis630_write(u8 reg, u8 data)
+{
+	outb(data, acpi_base + reg);
+}
+
+static int sis630_transaction_start(struct i2c_adapter *adap, int size, u8 *oldclock)
+{
+        int temp;
+
+	/* Make sure the SMBus host is ready to start transmitting. */
+	if ((temp = sis630_read(SMB_CNT) & 0x03) != 0x00) {
+		dev_dbg(&adap->dev, "SMBus busy (%02x).Resetting...\n",temp);
+		/* kill smbus transaction */
+		sis630_write(SMBHOST_CNT, 0x20);
+
+		if ((temp = sis630_read(SMB_CNT) & 0x03) != 0x00) {
+			dev_dbg(&adap->dev, "Failed! (%02x)\n", temp);
+			return -1;
+                } else {
+			dev_dbg(&adap->dev, "Successfull!\n");
+		}
+        }
+
+	/* save old clock, so we can prevent machine for hung */
+	*oldclock = sis630_read(SMB_CNT);
+
+	dev_dbg(&adap->dev, "saved clock 0x%02x\n", *oldclock);
+
+	/* disable timeout interrupt , set Host Master Clock to 56KHz if requested */
+	if (high_clock)
+		sis630_write(SMB_CNT, 0x20);
+	else
+		sis630_write(SMB_CNT, (*oldclock & ~0x40));
+
+	/* clear all sticky bits */
+	temp = sis630_read(SMB_STS);
+	sis630_write(SMB_STS, temp & 0x1e);
+
+	/* start the transaction by setting bit 4 and size */
+	sis630_write(SMBHOST_CNT,0x10 | (size & 0x07));
+
+	return 0;
+}
+
+static int sis630_transaction_wait(struct i2c_adapter *adap, int size)
+{
+	int temp, result = 0, timeout = 0;
+
+	/* We will always wait for a fraction of a second! */
+	do {
+		msleep(1);
+		temp = sis630_read(SMB_STS);
+		/* check if block transmitted */
+		if (size == SIS630_BLOCK_DATA && (temp & 0x10))
+			break;
+	} while (!(temp & 0x0e) && (timeout++ < MAX_TIMEOUT));
+
+	/* If the SMBus is still busy, we give up */
+	if (timeout >= MAX_TIMEOUT) {
+		dev_dbg(&adap->dev, "SMBus Timeout!\n");
+		result = -1;
+	}
+
+	if (temp & 0x02) {
+		dev_dbg(&adap->dev, "Error: Failed bus transaction\n");
+		result = -1;
+	}
+
+	if (temp & 0x04) {
+		dev_err(&adap->dev, "Bus collision!\n");
+		result = -1;
+		/*
+		  TBD: Datasheet say:
+		  the software should clear this bit and restart SMBUS operation.
+		  Should we do it or user start request again?
+		*/
+	}
+
+	return result;
+}
+
+static void sis630_transaction_end(struct i2c_adapter *adap, u8 oldclock)
+{
+	int temp = 0;
+
+	/* clear all status "sticky" bits */
+	sis630_write(SMB_STS, temp);
+
+	dev_dbg(&adap->dev, "SMB_CNT before clock restore 0x%02x\n", sis630_read(SMB_CNT));
+
+	/*
+	 * restore old Host Master Clock if high_clock is set
+	 * and oldclock was not 56KHz
+	 */
+	if (high_clock && !(oldclock & 0x20))
+		sis630_write(SMB_CNT,(sis630_read(SMB_CNT) & ~0x20));
+
+	dev_dbg(&adap->dev, "SMB_CNT after clock restore 0x%02x\n", sis630_read(SMB_CNT));
+}
+
+static int sis630_transaction(struct i2c_adapter *adap, int size)
+{
+	int result = 0;
+	u8 oldclock = 0;
+
+	result = sis630_transaction_start(adap, size, &oldclock);
+	if (!result) {
+		result = sis630_transaction_wait(adap, size);
+		sis630_transaction_end(adap, oldclock);
+	}
+
+	return result;
+}
+
+static int sis630_block_data(struct i2c_adapter *adap, union i2c_smbus_data *data, int read_write)
+{
+	int i, len = 0, rc = 0;
+	u8 oldclock = 0;
+
+	if (read_write == I2C_SMBUS_WRITE) {
+		len = data->block[0];
+		if (len < 0)
+			len = 0;
+		else if (len > 32)
+			len = 32;
+		sis630_write(SMB_COUNT, len);
+		for (i=1; i <= len; i++) {
+			dev_dbg(&adap->dev, "set data 0x%02x\n", data->block[i]);
+			/* set data */
+			sis630_write(SMB_BYTE+(i-1)%8, data->block[i]);
+			if (i==8 || (len<8 && i==len)) {
+				dev_dbg(&adap->dev, "start trans len=%d i=%d\n",len ,i);
+				/* first transaction */
+				if (sis630_transaction_start(adap, SIS630_BLOCK_DATA, &oldclock))
+					return -1;
+			}
+			else if ((i-1)%8 == 7 || i==len) {
+				dev_dbg(&adap->dev, "trans_wait len=%d i=%d\n",len,i);
+				if (i>8) {
+					dev_dbg(&adap->dev, "clear smbary_sts len=%d i=%d\n",len,i);
+					/*
+					   If this is not first transaction,
+					   we must clear sticky bit.
+					   clear SMBARY_STS
+					*/
+					sis630_write(SMB_STS,0x10);
+				}
+				if (sis630_transaction_wait(adap, SIS630_BLOCK_DATA)) {
+					dev_dbg(&adap->dev, "trans_wait failed\n");
+					rc = -1;
+					break;
+				}
+			}
+		}
+	}
+	else {
+		/* read request */
+		data->block[0] = len = 0;
+		if (sis630_transaction_start(adap, SIS630_BLOCK_DATA, &oldclock)) {
+			return -1;
+		}
+		do {
+			if (sis630_transaction_wait(adap, SIS630_BLOCK_DATA)) {
+				dev_dbg(&adap->dev, "trans_wait failed\n");
+				rc = -1;
+				break;
+			}
+			/* if this first transaction then read byte count */
+			if (len == 0)
+				data->block[0] = sis630_read(SMB_COUNT);
+
+			/* just to be sure */
+			if (data->block[0] > 32)
+				data->block[0] = 32;
+
+			dev_dbg(&adap->dev, "block data read len=0x%x\n", data->block[0]);
+
+			for (i=0; i < 8 && len < data->block[0]; i++,len++) {
+				dev_dbg(&adap->dev, "read i=%d len=%d\n", i, len);
+				data->block[len+1] = sis630_read(SMB_BYTE+i);
+			}
+
+			dev_dbg(&adap->dev, "clear smbary_sts len=%d i=%d\n",len,i);
+
+			/* clear SMBARY_STS */
+			sis630_write(SMB_STS,0x10);
+		} while(len < data->block[0]);
+	}
+
+	sis630_transaction_end(adap, oldclock);
+
+	return rc;
+}
+
+/* Return -1 on error. */
+static s32 sis630_access(struct i2c_adapter *adap, u16 addr,
+			 unsigned short flags, char read_write,
+			 u8 command, int size, union i2c_smbus_data *data)
+{
+	switch (size) {
+		case I2C_SMBUS_QUICK:
+			sis630_write(SMB_ADDR, ((addr & 0x7f) << 1) | (read_write & 0x01));
+			size = SIS630_QUICK;
+			break;
+		case I2C_SMBUS_BYTE:
+			sis630_write(SMB_ADDR, ((addr & 0x7f) << 1) | (read_write & 0x01));
+			if (read_write == I2C_SMBUS_WRITE)
+				sis630_write(SMB_CMD, command);
+			size = SIS630_BYTE;
+			break;
+		case I2C_SMBUS_BYTE_DATA:
+			sis630_write(SMB_ADDR, ((addr & 0x7f) << 1) | (read_write & 0x01));
+			sis630_write(SMB_CMD, command);
+			if (read_write == I2C_SMBUS_WRITE)
+				sis630_write(SMB_BYTE, data->byte);
+			size = SIS630_BYTE_DATA;
+			break;
+		case I2C_SMBUS_PROC_CALL:
+		case I2C_SMBUS_WORD_DATA:
+			sis630_write(SMB_ADDR,((addr & 0x7f) << 1) | (read_write & 0x01));
+			sis630_write(SMB_CMD, command);
+			if (read_write == I2C_SMBUS_WRITE) {
+				sis630_write(SMB_BYTE, data->word & 0xff);
+				sis630_write(SMB_BYTE + 1,(data->word & 0xff00) >> 8);
+			}
+			size = (size == I2C_SMBUS_PROC_CALL ? SIS630_PCALL : SIS630_WORD_DATA);
+			break;
+		case I2C_SMBUS_BLOCK_DATA:
+			sis630_write(SMB_ADDR,((addr & 0x7f) << 1) | (read_write & 0x01));
+			sis630_write(SMB_CMD, command);
+			size = SIS630_BLOCK_DATA;
+			return sis630_block_data(adap, data, read_write);
+		default:
+			printk("Unsupported I2C size\n");
+			return -1;
+			break;
+	}
+
+	if (sis630_transaction(adap, size))
+		return -1;
+
+	if ((size != SIS630_PCALL) &&
+		((read_write == I2C_SMBUS_WRITE) || (size == SIS630_QUICK))) {
+		return 0;
+	}
+
+	switch(size) {
+		case SIS630_BYTE:
+		case SIS630_BYTE_DATA:
+			data->byte = sis630_read(SMB_BYTE);
+			break;
+		case SIS630_PCALL:
+		case SIS630_WORD_DATA:
+			data->word = sis630_read(SMB_BYTE) + (sis630_read(SMB_BYTE + 1) << 8);
+			break;
+		default:
+			return -1;
+			break;
+	}
+
+	return 0;
+}
+
+static u32 sis630_func(struct i2c_adapter *adapter)
+{
+	return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE | I2C_FUNC_SMBUS_BYTE_DATA |
+		I2C_FUNC_SMBUS_WORD_DATA | I2C_FUNC_SMBUS_PROC_CALL |
+		I2C_FUNC_SMBUS_BLOCK_DATA;
+}
+
+static int sis630_setup(struct pci_dev *sis630_dev)
+{
+	unsigned char b;
+	struct pci_dev *dummy = NULL;
+	int retval = -ENODEV, i;
+
+	/* check for supported SiS devices */
+	for (i=0; supported[i] > 0 ; i++) {
+		if ((dummy = pci_get_device(PCI_VENDOR_ID_SI, supported[i], dummy)))
+			break; /* found */
+	}
+
+	if (dummy) {
+		pci_dev_put(dummy);
+	}
+        else if (force) {
+		dev_err(&sis630_dev->dev, "WARNING: Can't detect SIS630 compatible device, but "
+			"loading because of force option enabled\n");
+ 	}
+	else {
+		return -ENODEV;
+	}
+
+	/*
+	   Enable ACPI first , so we can accsess reg 74-75
+	   in acpi io space and read acpi base addr
+	*/
+	if (pci_read_config_byte(sis630_dev, SIS630_BIOS_CTL_REG,&b)) {
+		dev_err(&sis630_dev->dev, "Error: Can't read bios ctl reg\n");
+		goto exit;
+	}
+	/* if ACPI already enabled , do nothing */
+	if (!(b & 0x80) &&
+	    pci_write_config_byte(sis630_dev, SIS630_BIOS_CTL_REG, b | 0x80)) {
+		dev_err(&sis630_dev->dev, "Error: Can't enable ACPI\n");
+		goto exit;
+	}
+
+	/* Determine the ACPI base address */
+	if (pci_read_config_word(sis630_dev,SIS630_ACPI_BASE_REG,&acpi_base)) {
+		dev_err(&sis630_dev->dev, "Error: Can't determine ACPI base address\n");
+		goto exit;
+	}
+
+	dev_dbg(&sis630_dev->dev, "ACPI base at 0x%04x\n", acpi_base);
+
+	/* Everything is happy, let's grab the memory and set things up. */
+	if (!request_region(acpi_base + SMB_STS, SIS630_SMB_IOREGION, "sis630-smbus")) {
+		dev_err(&sis630_dev->dev, "SMBus registers 0x%04x-0x%04x already "
+			"in use!\n", acpi_base + SMB_STS, acpi_base + SMB_SAA);
+		goto exit;
+	}
+
+	retval = 0;
+
+exit:
+	if (retval)
+		acpi_base = 0;
+	return retval;
+}
+
+
+static struct i2c_algorithm smbus_algorithm = {
+	.name		= "Non-I2C SMBus adapter",
+	.id		= I2C_ALGO_SMBUS,
+	.smbus_xfer	= sis630_access,
+	.functionality	= sis630_func,
+};
+
+static struct i2c_adapter sis630_adapter = {
+	.owner		= THIS_MODULE,
+	.class		= I2C_CLASS_HWMON,
+	.name		= "unset",
+	.algo		= &smbus_algorithm,
+};
+
+static struct pci_device_id sis630_ids[] __devinitdata = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_503) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_LPC) },
+	{ 0, }
+};
+
+MODULE_DEVICE_TABLE (pci, sis630_ids);
+
+static int __devinit sis630_probe(struct pci_dev *dev, const struct pci_device_id *id)
+{
+	if (sis630_setup(dev)) {
+		dev_err(&dev->dev, "SIS630 comp. bus not detected, module not inserted.\n");
+		return -ENODEV;
+	}
+
+	/* set up the driverfs linkage to our parent device */
+	sis630_adapter.dev.parent = &dev->dev;
+
+	sprintf(sis630_adapter.name, "SMBus SIS630 adapter at %04x",
+		acpi_base + SMB_STS);
+
+	return i2c_add_adapter(&sis630_adapter);
+}
+
+static void __devexit sis630_remove(struct pci_dev *dev)
+{
+	if (acpi_base) {
+		i2c_del_adapter(&sis630_adapter);
+		release_region(acpi_base + SMB_STS, SIS630_SMB_IOREGION);
+		acpi_base = 0;
+	}
+}
+
+
+static struct pci_driver sis630_driver = {
+	.name		= "sis630_smbus",
+	.id_table	= sis630_ids,
+	.probe		= sis630_probe,
+	.remove		= __devexit_p(sis630_remove),
+};
+
+static int __init i2c_sis630_init(void)
+{
+	return pci_register_driver(&sis630_driver);
+}
+
+
+static void __exit i2c_sis630_exit(void)
+{
+	pci_unregister_driver(&sis630_driver);
+}
+
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Alexander Malysh <amalysh@web.de>");
+MODULE_DESCRIPTION("SIS630 SMBus driver");
+
+module_init(i2c_sis630_init);
+module_exit(i2c_sis630_exit);
diff --git a/drivers/i2c/busses/i2c-sis96x.c b/drivers/i2c/busses/i2c-sis96x.c
new file mode 100644
index 00000000000..3cac6d43bce
--- /dev/null
+++ b/drivers/i2c/busses/i2c-sis96x.c
@@ -0,0 +1,358 @@
+/*
+    sis96x.c - Part of lm_sensors, Linux kernel modules for hardware
+              monitoring
+
+    Copyright (c) 2003 Mark M. Hoffman <mhoffman@lightlink.com>
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+/*
+    This module must be considered BETA unless and until
+    the chipset manufacturer releases a datasheet.
+    The register definitions are based on the SiS630.
+
+    This module relies on quirk_sis_96x_smbus (drivers/pci/quirks.c)
+    for just about every machine for which users have reported.
+    If this module isn't detecting your 96x south bridge, have a 
+    look there.
+
+    We assume there can only be one SiS96x with one SMBus interface.
+*/
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/stddef.h>
+#include <linux/sched.h>
+#include <linux/ioport.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <asm/io.h>
+
+/*
+	HISTORY:
+	2003-05-11	1.0.0 	Updated from lm_sensors project for kernel 2.5
+				(was i2c-sis645.c from lm_sensors 2.7.0)
+*/
+#define SIS96x_VERSION "1.0.0"
+
+/* base address register in PCI config space */
+#define SIS96x_BAR 0x04
+
+/* SiS96x SMBus registers */
+#define SMB_STS      0x00
+#define SMB_EN       0x01
+#define SMB_CNT      0x02
+#define SMB_HOST_CNT 0x03
+#define SMB_ADDR     0x04
+#define SMB_CMD      0x05
+#define SMB_PCOUNT   0x06
+#define SMB_COUNT    0x07
+#define SMB_BYTE     0x08
+#define SMB_DEV_ADDR 0x10
+#define SMB_DB0      0x11
+#define SMB_DB1      0x12
+#define SMB_SAA      0x13
+
+/* register count for request_region */
+#define SMB_IOSIZE 0x20
+
+/* Other settings */
+#define MAX_TIMEOUT 500
+
+/* SiS96x SMBus constants */
+#define SIS96x_QUICK      0x00
+#define SIS96x_BYTE       0x01
+#define SIS96x_BYTE_DATA  0x02
+#define SIS96x_WORD_DATA  0x03
+#define SIS96x_PROC_CALL  0x04
+#define SIS96x_BLOCK_DATA 0x05
+
+static struct i2c_adapter sis96x_adapter;
+static u16 sis96x_smbus_base = 0;
+
+static inline u8 sis96x_read(u8 reg)
+{
+	return inb(sis96x_smbus_base + reg) ;
+}
+
+static inline void sis96x_write(u8 reg, u8 data)
+{
+	outb(data, sis96x_smbus_base + reg) ;
+}
+
+/* Execute a SMBus transaction.
+   int size is from SIS96x_QUICK to SIS96x_BLOCK_DATA
+ */
+static int sis96x_transaction(int size)
+{
+	int temp;
+	int result = 0;
+	int timeout = 0;
+
+	dev_dbg(&sis96x_adapter.dev, "SMBus transaction %d\n", size);
+
+	/* Make sure the SMBus host is ready to start transmitting */
+	if (((temp = sis96x_read(SMB_CNT)) & 0x03) != 0x00) {
+
+		dev_dbg(&sis96x_adapter.dev, "SMBus busy (0x%02x). "
+			"Resetting...\n", temp);
+
+		/* kill the transaction */
+		sis96x_write(SMB_HOST_CNT, 0x20);
+
+		/* check it again */
+		if (((temp = sis96x_read(SMB_CNT)) & 0x03) != 0x00) {
+			dev_dbg(&sis96x_adapter.dev, "Failed (0x%02x)\n", temp);
+			return -1;
+		} else {
+			dev_dbg(&sis96x_adapter.dev, "Successful\n");
+		}
+	}
+
+	/* Turn off timeout interrupts, set fast host clock */
+	sis96x_write(SMB_CNT, 0x20);
+
+	/* clear all (sticky) status flags */
+	temp = sis96x_read(SMB_STS);
+	sis96x_write(SMB_STS, temp & 0x1e);
+
+	/* start the transaction by setting bit 4 and size bits */
+	sis96x_write(SMB_HOST_CNT, 0x10 | (size & 0x07));
+
+	/* We will always wait for a fraction of a second! */
+	do {
+		msleep(1);
+		temp = sis96x_read(SMB_STS);
+	} while (!(temp & 0x0e) && (timeout++ < MAX_TIMEOUT));
+
+	/* If the SMBus is still busy, we give up */
+	if (timeout >= MAX_TIMEOUT) {
+		dev_dbg(&sis96x_adapter.dev, "SMBus Timeout! (0x%02x)\n", temp);
+		result = -1;
+	}
+
+	/* device error - probably missing ACK */
+	if (temp & 0x02) {
+		dev_dbg(&sis96x_adapter.dev, "Failed bus transaction!\n");
+		result = -1;
+	}
+
+	/* bus collision */
+	if (temp & 0x04) {
+		dev_dbg(&sis96x_adapter.dev, "Bus collision!\n");
+		result = -1;
+	}
+
+	/* Finish up by resetting the bus */
+	sis96x_write(SMB_STS, temp);
+	if ((temp = sis96x_read(SMB_STS))) {
+		dev_dbg(&sis96x_adapter.dev, "Failed reset at "
+			"end of transaction! (0x%02x)\n", temp);
+	}
+
+	return result;
+}
+
+/* Return -1 on error. */
+static s32 sis96x_access(struct i2c_adapter * adap, u16 addr,
+			 unsigned short flags, char read_write,
+			 u8 command, int size, union i2c_smbus_data * data)
+{
+
+	switch (size) {
+	case I2C_SMBUS_QUICK:
+		sis96x_write(SMB_ADDR, ((addr & 0x7f) << 1) | (read_write & 0x01));
+		size = SIS96x_QUICK;
+		break;
+
+	case I2C_SMBUS_BYTE:
+		sis96x_write(SMB_ADDR, ((addr & 0x7f) << 1) | (read_write & 0x01));
+		if (read_write == I2C_SMBUS_WRITE)
+			sis96x_write(SMB_CMD, command);
+		size = SIS96x_BYTE;
+		break;
+
+	case I2C_SMBUS_BYTE_DATA:
+		sis96x_write(SMB_ADDR, ((addr & 0x7f) << 1) | (read_write & 0x01));
+		sis96x_write(SMB_CMD, command);
+		if (read_write == I2C_SMBUS_WRITE)
+			sis96x_write(SMB_BYTE, data->byte);
+		size = SIS96x_BYTE_DATA;
+		break;
+
+	case I2C_SMBUS_PROC_CALL:
+	case I2C_SMBUS_WORD_DATA:
+		sis96x_write(SMB_ADDR, ((addr & 0x7f) << 1) | (read_write & 0x01));
+		sis96x_write(SMB_CMD, command);
+		if (read_write == I2C_SMBUS_WRITE) {
+			sis96x_write(SMB_BYTE, data->word & 0xff);
+			sis96x_write(SMB_BYTE + 1, (data->word & 0xff00) >> 8);
+		}
+		size = (size == I2C_SMBUS_PROC_CALL ? 
+			SIS96x_PROC_CALL : SIS96x_WORD_DATA);
+		break;
+
+	case I2C_SMBUS_BLOCK_DATA:
+		/* TO DO: */
+		dev_info(&adap->dev, "SMBus block not implemented!\n");
+		return -1;
+		break;
+
+	default:
+		dev_info(&adap->dev, "Unsupported I2C size\n");
+		return -1;
+		break;
+	}
+
+	if (sis96x_transaction(size))
+		return -1;
+
+	if ((size != SIS96x_PROC_CALL) &&
+		((read_write == I2C_SMBUS_WRITE) || (size == SIS96x_QUICK)))
+		return 0;
+
+	switch (size) {
+	case SIS96x_BYTE:
+	case SIS96x_BYTE_DATA:
+		data->byte = sis96x_read(SMB_BYTE);
+		break;
+
+	case SIS96x_WORD_DATA:
+	case SIS96x_PROC_CALL:
+		data->word = sis96x_read(SMB_BYTE) +
+				(sis96x_read(SMB_BYTE + 1) << 8);
+		break;
+	}
+	return 0;
+}
+
+static u32 sis96x_func(struct i2c_adapter *adapter)
+{
+	return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE |
+	    I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA |
+	    I2C_FUNC_SMBUS_PROC_CALL;
+}
+
+static struct i2c_algorithm smbus_algorithm = {
+	.name		= "Non-I2C SMBus adapter",
+	.id		= I2C_ALGO_SMBUS,
+	.smbus_xfer	= sis96x_access,
+	.functionality	= sis96x_func,
+};
+
+static struct i2c_adapter sis96x_adapter = {
+	.owner		= THIS_MODULE,
+	.class		= I2C_CLASS_HWMON,
+	.algo		= &smbus_algorithm,
+	.name		= "unset",
+};
+
+static struct pci_device_id sis96x_ids[] = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_SMBUS) },
+	{ 0, }
+};
+
+MODULE_DEVICE_TABLE (pci, sis96x_ids);
+
+static int __devinit sis96x_probe(struct pci_dev *dev,
+				const struct pci_device_id *id)
+{
+	u16 ww = 0;
+	int retval;
+
+	if (sis96x_smbus_base) {
+		dev_err(&dev->dev, "Only one device supported.\n");
+		return -EBUSY;
+	}
+
+	pci_read_config_word(dev, PCI_CLASS_DEVICE, &ww);
+	if (PCI_CLASS_SERIAL_SMBUS != ww) {
+		dev_err(&dev->dev, "Unsupported device class 0x%04x!\n", ww);
+		return -ENODEV;
+	}
+
+	sis96x_smbus_base = pci_resource_start(dev, SIS96x_BAR);
+	if (!sis96x_smbus_base) {
+		dev_err(&dev->dev, "SiS96x SMBus base address "
+			"not initialized!\n");
+		return -EINVAL;
+	}
+	dev_info(&dev->dev, "SiS96x SMBus base address: 0x%04x\n",
+			sis96x_smbus_base);
+
+	/* Everything is happy, let's grab the memory and set things up. */
+	if (!request_region(sis96x_smbus_base, SMB_IOSIZE, "sis96x-smbus")) {
+		dev_err(&dev->dev, "SMBus registers 0x%04x-0x%04x "
+			"already in use!\n", sis96x_smbus_base,
+			sis96x_smbus_base + SMB_IOSIZE - 1);
+
+		sis96x_smbus_base = 0;
+		return -EINVAL;
+	}
+
+	/* set up the driverfs linkage to our parent device */
+	sis96x_adapter.dev.parent = &dev->dev;
+
+	snprintf(sis96x_adapter.name, I2C_NAME_SIZE,
+		"SiS96x SMBus adapter at 0x%04x", sis96x_smbus_base);
+
+	if ((retval = i2c_add_adapter(&sis96x_adapter))) {
+		dev_err(&dev->dev, "Couldn't register adapter!\n");
+		release_region(sis96x_smbus_base, SMB_IOSIZE);
+		sis96x_smbus_base = 0;
+	}
+
+	return retval;
+}
+
+static void __devexit sis96x_remove(struct pci_dev *dev)
+{
+	if (sis96x_smbus_base) {
+		i2c_del_adapter(&sis96x_adapter);
+		release_region(sis96x_smbus_base, SMB_IOSIZE);
+		sis96x_smbus_base = 0;
+	}
+}
+
+static struct pci_driver sis96x_driver = {
+	.name		= "sis96x_smbus",
+	.id_table	= sis96x_ids,
+	.probe		= sis96x_probe,
+	.remove		= __devexit_p(sis96x_remove),
+};
+
+static int __init i2c_sis96x_init(void)
+{
+	printk(KERN_INFO "i2c-sis96x version %s\n", SIS96x_VERSION);
+	return pci_register_driver(&sis96x_driver);
+}
+
+static void __exit i2c_sis96x_exit(void)
+{
+	pci_unregister_driver(&sis96x_driver);
+}
+
+MODULE_AUTHOR("Mark M. Hoffman <mhoffman@lightlink.com>");
+MODULE_DESCRIPTION("SiS96x SMBus driver");
+MODULE_LICENSE("GPL");
+
+/* Register initialization functions using helper macros */
+module_init(i2c_sis96x_init);
+module_exit(i2c_sis96x_exit);
+
diff --git a/drivers/i2c/busses/i2c-stub.c b/drivers/i2c/busses/i2c-stub.c
new file mode 100644
index 00000000000..19c805ead4d
--- /dev/null
+++ b/drivers/i2c/busses/i2c-stub.c
@@ -0,0 +1,143 @@
+/*
+    i2c-stub.c - Part of lm_sensors, Linux kernel modules for hardware
+              monitoring
+
+    Copyright (c) 2004 Mark M. Hoffman <mhoffman@lightlink.com>
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#define DEBUG 1
+
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/i2c.h>
+
+static u8  stub_pointer;
+static u8  stub_bytes[256];
+static u16 stub_words[256];
+
+/* Return -1 on error. */
+static s32 stub_xfer(struct i2c_adapter * adap, u16 addr, unsigned short flags,
+	char read_write, u8 command, int size, union i2c_smbus_data * data)
+{
+	s32 ret;
+
+	switch (size) {
+
+	case I2C_SMBUS_QUICK:
+		dev_dbg(&adap->dev, "smbus quick - addr 0x%02x\n", addr);
+		ret = 0;
+		break;
+
+	case I2C_SMBUS_BYTE:
+		if (read_write == I2C_SMBUS_WRITE) {
+			stub_pointer = command;
+			dev_dbg(&adap->dev, "smbus byte - addr 0x%02x, "
+					"wrote 0x%02x.\n",
+					addr, command);
+		} else {
+			data->byte = stub_bytes[stub_pointer++];
+			dev_dbg(&adap->dev, "smbus byte - addr 0x%02x, "
+					"read  0x%02x.\n",
+					addr, data->byte);
+		}
+
+		ret = 0;
+		break;
+
+	case I2C_SMBUS_BYTE_DATA:
+		if (read_write == I2C_SMBUS_WRITE) {
+			stub_bytes[command] = data->byte;
+			dev_dbg(&adap->dev, "smbus byte data - addr 0x%02x, "
+					"wrote 0x%02x at 0x%02x.\n",
+					addr, data->byte, command);
+		} else {
+			data->byte = stub_bytes[command];
+			dev_dbg(&adap->dev, "smbus byte data - addr 0x%02x, "
+					"read  0x%02x at 0x%02x.\n",
+					addr, data->byte, command);
+		}
+		stub_pointer = command + 1;
+
+		ret = 0;
+		break;
+
+	case I2C_SMBUS_WORD_DATA:
+		if (read_write == I2C_SMBUS_WRITE) {
+			stub_words[command] = data->word;
+			dev_dbg(&adap->dev, "smbus word data - addr 0x%02x, "
+					"wrote 0x%04x at 0x%02x.\n",
+					addr, data->word, command);
+		} else {
+			data->word = stub_words[command];
+			dev_dbg(&adap->dev, "smbus word data - addr 0x%02x, "
+					"read  0x%04x at 0x%02x.\n",
+					addr, data->word, command);
+		}
+
+		ret = 0;
+		break;
+
+	default:
+		dev_dbg(&adap->dev, "Unsupported I2C/SMBus command\n");
+		ret = -1;
+		break;
+	} /* switch (size) */
+
+	return ret;
+}
+
+static u32 stub_func(struct i2c_adapter *adapter)
+{
+	return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE |
+		I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA;
+}
+
+static struct i2c_algorithm smbus_algorithm = {
+	.name		= "Non-I2C SMBus adapter",
+	.id		= I2C_ALGO_SMBUS,
+	.functionality	= stub_func,
+	.smbus_xfer	= stub_xfer,
+};
+
+static struct i2c_adapter stub_adapter = {
+	.owner		= THIS_MODULE,
+	.class		= I2C_CLASS_HWMON,
+	.algo		= &smbus_algorithm,
+	.name		= "SMBus stub driver",
+};
+
+static int __init i2c_stub_init(void)
+{
+	printk(KERN_INFO "i2c-stub loaded\n");
+	return i2c_add_adapter(&stub_adapter);
+}
+
+static void __exit i2c_stub_exit(void)
+{
+	i2c_del_adapter(&stub_adapter);
+}
+
+MODULE_AUTHOR("Mark M. Hoffman <mhoffman@lightlink.com>");
+MODULE_DESCRIPTION("I2C stub driver");
+MODULE_LICENSE("GPL");
+
+module_init(i2c_stub_init);
+module_exit(i2c_stub_exit);
+
diff --git a/drivers/i2c/busses/i2c-via.c b/drivers/i2c/busses/i2c-via.c
new file mode 100644
index 00000000000..2cbc4cd2236
--- /dev/null
+++ b/drivers/i2c/busses/i2c-via.c
@@ -0,0 +1,185 @@
+/*
+    i2c-via.c - Part of lm_sensors,  Linux kernel modules
+                for hardware monitoring
+
+    i2c Support for Via Technologies 82C586B South Bridge
+
+    Copyright (c) 1998, 1999 Kyösti Mälkki <kmalkki@cc.hut.fi>
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/ioport.h>
+#include <linux/init.h>
+#include <linux/i2c.h>
+#include <linux/i2c-algo-bit.h>
+#include <asm/io.h>
+
+/* Power management registers */
+#define PM_CFG_REVID	0x08	/* silicon revision code */
+#define PM_CFG_IOBASE0	0x20
+#define PM_CFG_IOBASE1	0x48
+
+#define I2C_DIR		(pm_io_base+0x40)
+#define I2C_OUT		(pm_io_base+0x42)
+#define I2C_IN		(pm_io_base+0x44)
+#define I2C_SCL		0x02	/* clock bit in DIR/OUT/IN register */
+#define I2C_SDA		0x04
+
+/* io-region reservation */
+#define IOSPACE		0x06
+#define IOTEXT		"via-i2c"
+
+static u16 pm_io_base = 0;
+
+/*
+   It does not appear from the datasheet that the GPIO pins are
+   open drain. So a we set a low value by setting the direction to
+   output and a high value by setting the direction to input and
+   relying on the required I2C pullup. The data value is initialized
+   to 0 in via_init() and never changed.
+*/
+static void bit_via_setscl(void *data, int state)
+{
+	outb(state ? inb(I2C_DIR) & ~I2C_SCL : inb(I2C_DIR) | I2C_SCL, I2C_DIR);
+}
+
+static void bit_via_setsda(void *data, int state)
+{
+	outb(state ? inb(I2C_DIR) & ~I2C_SDA : inb(I2C_DIR) | I2C_SDA, I2C_DIR);
+}
+
+static int bit_via_getscl(void *data)
+{
+	return (0 != (inb(I2C_IN) & I2C_SCL));
+}
+
+static int bit_via_getsda(void *data)
+{
+	return (0 != (inb(I2C_IN) & I2C_SDA));
+}
+
+
+static struct i2c_algo_bit_data bit_data = {
+	.setsda		= bit_via_setsda,
+	.setscl		= bit_via_setscl,
+	.getsda		= bit_via_getsda,
+	.getscl		= bit_via_getscl,
+	.udelay		= 5,
+	.mdelay		= 5,
+	.timeout	= HZ
+};
+
+static struct i2c_adapter vt586b_adapter = {
+	.owner		= THIS_MODULE,
+	.class          = I2C_CLASS_HWMON,
+	.name		= "VIA i2c",
+	.algo_data	= &bit_data,
+};
+
+
+static struct pci_device_id vt586b_ids[] __devinitdata = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_3) },
+	{ 0, }
+};
+
+MODULE_DEVICE_TABLE (pci, vt586b_ids);
+
+static int __devinit vt586b_probe(struct pci_dev *dev, const struct pci_device_id *id)
+{
+	u16 base;
+	u8 rev;
+	int res;
+
+	if (pm_io_base) {
+		dev_err(&dev->dev, "i2c-via: Will only support one host\n");
+		return -ENODEV;
+	}
+
+	pci_read_config_byte(dev, PM_CFG_REVID, &rev);
+
+	switch (rev) {
+	case 0x00:
+		base = PM_CFG_IOBASE0;
+		break;
+	case 0x01:
+	case 0x10:
+		base = PM_CFG_IOBASE1;
+		break;
+
+	default:
+		base = PM_CFG_IOBASE1;
+		/* later revision */
+	}
+
+	pci_read_config_word(dev, base, &pm_io_base);
+	pm_io_base &= (0xff << 8);
+
+	if (!request_region(I2C_DIR, IOSPACE, IOTEXT)) {
+		dev_err(&dev->dev, "IO 0x%x-0x%x already in use\n", I2C_DIR, I2C_DIR + IOSPACE);
+		return -ENODEV;
+	}
+
+	outb(inb(I2C_DIR) & ~(I2C_SDA | I2C_SCL), I2C_DIR);
+	outb(inb(I2C_OUT) & ~(I2C_SDA | I2C_SCL), I2C_OUT);
+
+	/* set up the driverfs linkage to our parent device */
+	vt586b_adapter.dev.parent = &dev->dev;
+
+	res = i2c_bit_add_bus(&vt586b_adapter);
+	if ( res < 0 ) {
+		release_region(I2C_DIR, IOSPACE);
+		pm_io_base = 0;
+		return res;
+	}
+	return 0;
+}
+
+static void __devexit vt586b_remove(struct pci_dev *dev)
+{
+	i2c_bit_del_bus(&vt586b_adapter);
+	release_region(I2C_DIR, IOSPACE);
+	pm_io_base = 0;
+}
+
+
+static struct pci_driver vt586b_driver = {
+	.name		= "vt586b_smbus",
+	.id_table	= vt586b_ids,
+	.probe		= vt586b_probe,
+	.remove		= __devexit_p(vt586b_remove),
+};
+
+static int __init i2c_vt586b_init(void)
+{
+	return pci_register_driver(&vt586b_driver);
+}
+
+static void __exit i2c_vt586b_exit(void)
+{
+	pci_unregister_driver(&vt586b_driver);
+}
+
+
+MODULE_AUTHOR("Kyösti Mälkki <kmalkki@cc.hut.fi>");
+MODULE_DESCRIPTION("i2c for Via vt82c586b southbridge");
+MODULE_LICENSE("GPL");
+
+module_init(i2c_vt586b_init);
+module_exit(i2c_vt586b_exit);
diff --git a/drivers/i2c/busses/i2c-viapro.c b/drivers/i2c/busses/i2c-viapro.c
new file mode 100644
index 00000000000..0bb60a636e1
--- /dev/null
+++ b/drivers/i2c/busses/i2c-viapro.c
@@ -0,0 +1,458 @@
+/*
+    i2c-viapro.c - Part of lm_sensors, Linux kernel modules for hardware
+              monitoring
+    Copyright (c) 1998 - 2002  Frodo Looijaard <frodol@dds.nl>, 
+    Philip Edelbrock <phil@netroedge.com>, Kyösti Mälkki <kmalkki@cc.hut.fi>,
+    Mark D. Studebaker <mdsxyz123@yahoo.com>
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+/*
+   Supports Via devices:
+	82C596A/B (0x3050)
+	82C596B (0x3051)
+	82C686A/B
+	8231
+	8233
+	8233A (0x3147 and 0x3177)
+	8235
+	8237
+   Note: we assume there can only be one device, with one SMBus interface.
+*/
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/stddef.h>
+#include <linux/sched.h>
+#include <linux/ioport.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <asm/io.h>
+
+static struct pci_dev *vt596_pdev;
+
+#define SMBBA1	   	 0x90
+#define SMBBA2     	 0x80
+#define SMBBA3     	 0xD0
+
+/* SMBus address offsets */
+static unsigned short vt596_smba;
+#define SMBHSTSTS	(vt596_smba + 0)
+#define SMBHSLVSTS	(vt596_smba + 1)
+#define SMBHSTCNT	(vt596_smba + 2)
+#define SMBHSTCMD	(vt596_smba + 3)
+#define SMBHSTADD	(vt596_smba + 4)
+#define SMBHSTDAT0	(vt596_smba + 5)
+#define SMBHSTDAT1	(vt596_smba + 6)
+#define SMBBLKDAT	(vt596_smba + 7)
+#define SMBSLVCNT	(vt596_smba + 8)
+#define SMBSHDWCMD	(vt596_smba + 9)
+#define SMBSLVEVT	(vt596_smba + 0xA)
+#define SMBSLVDAT	(vt596_smba + 0xC)
+
+/* PCI Address Constants */
+
+/* SMBus data in configuration space can be found in two places,
+   We try to select the better one*/
+
+static unsigned short smb_cf_hstcfg = 0xD2;
+
+#define SMBHSTCFG   (smb_cf_hstcfg)
+#define SMBSLVC     (smb_cf_hstcfg + 1)
+#define SMBSHDW1    (smb_cf_hstcfg + 2)
+#define SMBSHDW2    (smb_cf_hstcfg + 3)
+#define SMBREV      (smb_cf_hstcfg + 4)
+
+/* Other settings */
+#define MAX_TIMEOUT	500
+#define ENABLE_INT9	0
+
+/* VT82C596 constants */
+#define VT596_QUICK      0x00
+#define VT596_BYTE       0x04
+#define VT596_BYTE_DATA  0x08
+#define VT596_WORD_DATA  0x0C
+#define VT596_BLOCK_DATA 0x14
+
+
+/* If force is set to anything different from 0, we forcibly enable the
+   VT596. DANGEROUS! */
+static int force;
+module_param(force, bool, 0);
+MODULE_PARM_DESC(force, "Forcibly enable the SMBus. DANGEROUS!");
+
+/* If force_addr is set to anything different from 0, we forcibly enable
+   the VT596 at the given address. VERY DANGEROUS! */
+static u16 force_addr;
+module_param(force_addr, ushort, 0);
+MODULE_PARM_DESC(force_addr,
+		 "Forcibly enable the SMBus at the given address. "
+		 "EXTREMELY DANGEROUS!");
+
+
+static struct i2c_adapter vt596_adapter;
+
+/* Another internally used function */
+static int vt596_transaction(void)
+{
+	int temp;
+	int result = 0;
+	int timeout = 0;
+
+	dev_dbg(&vt596_adapter.dev, "Transaction (pre): CNT=%02x, CMD=%02x, "
+		"ADD=%02x, DAT0=%02x, DAT1=%02x\n", inb_p(SMBHSTCNT), 
+		inb_p(SMBHSTCMD), inb_p(SMBHSTADD), inb_p(SMBHSTDAT0), 
+		inb_p(SMBHSTDAT1));
+
+	/* Make sure the SMBus host is ready to start transmitting */
+	if ((temp = inb_p(SMBHSTSTS)) & 0x1F) {
+		dev_dbg(&vt596_adapter.dev, "SMBus busy (0x%02x). "
+				"Resetting...\n", temp);
+		
+		outb_p(temp, SMBHSTSTS);
+		if ((temp = inb_p(SMBHSTSTS)) & 0x1F) {
+			dev_dbg(&vt596_adapter.dev, "Failed! (0x%02x)\n", temp);
+			
+			return -1;
+		} else {
+			dev_dbg(&vt596_adapter.dev, "Successfull!\n");
+		}
+	}
+
+	/* start the transaction by setting bit 6 */
+	outb_p(inb(SMBHSTCNT) | 0x040, SMBHSTCNT);
+
+	/* We will always wait for a fraction of a second! 
+	   I don't know if VIA needs this, Intel did  */
+	do {
+		msleep(1);
+		temp = inb_p(SMBHSTSTS);
+	} while ((temp & 0x01) && (timeout++ < MAX_TIMEOUT));
+
+	/* If the SMBus is still busy, we give up */
+	if (timeout >= MAX_TIMEOUT) {
+		result = -1;
+		dev_dbg(&vt596_adapter.dev, "SMBus Timeout!\n");
+	}
+
+	if (temp & 0x10) {
+		result = -1;
+		dev_dbg(&vt596_adapter.dev, "Error: Failed bus transaction\n");
+	}
+
+	if (temp & 0x08) {
+		result = -1;
+		dev_info(&vt596_adapter.dev, "Bus collision! SMBus may be "
+			"locked until next hard\nreset. (sorry!)\n");
+		/* Clock stops and slave is stuck in mid-transmission */
+	}
+
+	if (temp & 0x04) {
+		result = -1;
+		dev_dbg(&vt596_adapter.dev, "Error: no response!\n");
+	}
+
+	if ((temp = inb_p(SMBHSTSTS)) & 0x1F) {
+		outb_p(temp, SMBHSTSTS);
+		if ((temp = inb_p(SMBHSTSTS)) & 0x1F) {
+			dev_warn(&vt596_adapter.dev, "Failed reset at end "
+				 "of transaction (%02x)\n", temp);
+		}
+	}
+
+	dev_dbg(&vt596_adapter.dev, "Transaction (post): CNT=%02x, CMD=%02x, "
+		"ADD=%02x, DAT0=%02x, DAT1=%02x\n", inb_p(SMBHSTCNT),
+		inb_p(SMBHSTCMD), inb_p(SMBHSTADD), inb_p(SMBHSTDAT0), 
+		inb_p(SMBHSTDAT1));
+	
+	return result;
+}
+
+/* Return -1 on error. */
+static s32 vt596_access(struct i2c_adapter *adap, u16 addr,
+		unsigned short flags,  char read_write, u8 command,
+		int size,  union i2c_smbus_data *data)
+{
+	int i, len;
+
+	switch (size) {
+	case I2C_SMBUS_PROC_CALL:
+		dev_info(&vt596_adapter.dev,
+			 "I2C_SMBUS_PROC_CALL not supported!\n");
+		return -1;
+	case I2C_SMBUS_QUICK:
+		outb_p(((addr & 0x7f) << 1) | (read_write & 0x01),
+		       SMBHSTADD);
+		size = VT596_QUICK;
+		break;
+	case I2C_SMBUS_BYTE:
+		outb_p(((addr & 0x7f) << 1) | (read_write & 0x01),
+		       SMBHSTADD);
+		if (read_write == I2C_SMBUS_WRITE)
+			outb_p(command, SMBHSTCMD);
+		size = VT596_BYTE;
+		break;
+	case I2C_SMBUS_BYTE_DATA:
+		outb_p(((addr & 0x7f) << 1) | (read_write & 0x01),
+		       SMBHSTADD);
+		outb_p(command, SMBHSTCMD);
+		if (read_write == I2C_SMBUS_WRITE)
+			outb_p(data->byte, SMBHSTDAT0);
+		size = VT596_BYTE_DATA;
+		break;
+	case I2C_SMBUS_WORD_DATA:
+		outb_p(((addr & 0x7f) << 1) | (read_write & 0x01),
+		       SMBHSTADD);
+		outb_p(command, SMBHSTCMD);
+		if (read_write == I2C_SMBUS_WRITE) {
+			outb_p(data->word & 0xff, SMBHSTDAT0);
+			outb_p((data->word & 0xff00) >> 8, SMBHSTDAT1);
+		}
+		size = VT596_WORD_DATA;
+		break;
+	case I2C_SMBUS_BLOCK_DATA:
+		outb_p(((addr & 0x7f) << 1) | (read_write & 0x01),
+		       SMBHSTADD);
+		outb_p(command, SMBHSTCMD);
+		if (read_write == I2C_SMBUS_WRITE) {
+			len = data->block[0];
+			if (len < 0)
+				len = 0;
+			if (len > I2C_SMBUS_BLOCK_MAX)
+				len = I2C_SMBUS_BLOCK_MAX;
+			outb_p(len, SMBHSTDAT0);
+			i = inb_p(SMBHSTCNT);	/* Reset SMBBLKDAT */
+			for (i = 1; i <= len; i++)
+				outb_p(data->block[i], SMBBLKDAT);
+		}
+		size = VT596_BLOCK_DATA;
+		break;
+	}
+
+	outb_p((size & 0x1C) + (ENABLE_INT9 & 1), SMBHSTCNT);
+
+	if (vt596_transaction()) /* Error in transaction */
+		return -1;
+
+	if ((read_write == I2C_SMBUS_WRITE) || (size == VT596_QUICK))
+		return 0;
+
+	switch (size) {
+	case VT596_BYTE:
+		/* Where is the result put? I assume here it is in
+		 * SMBHSTDAT0 but it might just as well be in the
+		 * SMBHSTCMD. No clue in the docs 
+		 */
+		data->byte = inb_p(SMBHSTDAT0);
+		break;
+	case VT596_BYTE_DATA:
+		data->byte = inb_p(SMBHSTDAT0);
+		break;
+	case VT596_WORD_DATA:
+		data->word = inb_p(SMBHSTDAT0) + (inb_p(SMBHSTDAT1) << 8);
+		break;
+	case VT596_BLOCK_DATA:
+		data->block[0] = inb_p(SMBHSTDAT0);
+		if (data->block[0] > I2C_SMBUS_BLOCK_MAX)
+			data->block[0] = I2C_SMBUS_BLOCK_MAX;
+		i = inb_p(SMBHSTCNT);	/* Reset SMBBLKDAT */
+		for (i = 1; i <= data->block[0]; i++)
+			data->block[i] = inb_p(SMBBLKDAT);
+		break;
+	}
+	return 0;
+}
+
+static u32 vt596_func(struct i2c_adapter *adapter)
+{
+	return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE |
+	    I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA |
+	    I2C_FUNC_SMBUS_BLOCK_DATA;
+}
+
+static struct i2c_algorithm smbus_algorithm = {
+	.name		= "Non-I2C SMBus adapter",
+	.id		= I2C_ALGO_SMBUS,
+	.smbus_xfer	= vt596_access,
+	.functionality	= vt596_func,
+};
+
+static struct i2c_adapter vt596_adapter = {
+	.owner		= THIS_MODULE,
+	.class		= I2C_CLASS_HWMON,
+	.algo		= &smbus_algorithm,
+	.name		= "unset",
+};
+
+static int __devinit vt596_probe(struct pci_dev *pdev,
+				 const struct pci_device_id *id)
+{
+	unsigned char temp;
+	int error = -ENODEV;
+	
+	/* Determine the address of the SMBus areas */
+	if (force_addr) {
+		vt596_smba = force_addr & 0xfff0;
+		force = 0;
+		goto found;
+	}
+
+	if ((pci_read_config_word(pdev, id->driver_data, &vt596_smba)) ||
+	    !(vt596_smba & 0x1)) {
+		/* try 2nd address and config reg. for 596 */
+		if (id->device == PCI_DEVICE_ID_VIA_82C596_3 &&
+		    !pci_read_config_word(pdev, SMBBA2, &vt596_smba) &&
+		    (vt596_smba & 0x1)) {
+			smb_cf_hstcfg = 0x84;
+		} else {
+			/* no matches at all */
+			dev_err(&pdev->dev, "Cannot configure "
+				"SMBus I/O Base address\n");
+			return -ENODEV;
+		}
+	}
+
+	vt596_smba &= 0xfff0;
+	if (vt596_smba == 0) {
+		dev_err(&pdev->dev, "SMBus base address "
+			"uninitialized - upgrade BIOS or use "
+			"force_addr=0xaddr\n");
+		return -ENODEV;
+	}
+
+ found:
+	if (!request_region(vt596_smba, 8, "viapro-smbus")) {
+		dev_err(&pdev->dev, "SMBus region 0x%x already in use!\n",
+		        vt596_smba);
+		return -ENODEV;
+	}
+
+	pci_read_config_byte(pdev, SMBHSTCFG, &temp);
+	/* If force_addr is set, we program the new address here. Just to make
+	   sure, we disable the VT596 first. */
+	if (force_addr) {
+		pci_write_config_byte(pdev, SMBHSTCFG, temp & 0xfe);
+		pci_write_config_word(pdev, id->driver_data, vt596_smba);
+		pci_write_config_byte(pdev, SMBHSTCFG, temp | 0x01);
+		dev_warn(&pdev->dev, "WARNING: SMBus interface set to new "
+		     "address 0x%04x!\n", vt596_smba);
+	} else if ((temp & 1) == 0) {
+		if (force) {
+			/* NOTE: This assumes I/O space and other allocations 
+			 * WERE done by the Bios!  Don't complain if your 
+			 * hardware does weird things after enabling this. 
+			 * :') Check for Bios updates before resorting to 
+			 * this.
+			 */
+			pci_write_config_byte(pdev, SMBHSTCFG, temp | 1);
+			dev_info(&pdev->dev, "Enabling SMBus device\n");
+		} else {
+			dev_err(&pdev->dev, "SMBUS: Error: Host SMBus "
+				"controller not enabled! - upgrade BIOS or "
+				"use force=1\n");
+			goto release_region;
+		}
+	}
+
+	if ((temp & 0x0E) == 8)
+		dev_dbg(&pdev->dev, "using Interrupt 9 for SMBus.\n");
+	else if ((temp & 0x0E) == 0)
+		dev_dbg(&pdev->dev, "using Interrupt SMI# for SMBus.\n");
+	else
+		dev_dbg(&pdev->dev, "Illegal Interrupt configuration "
+			"(or code out of date)!\n");
+
+	pci_read_config_byte(pdev, SMBREV, &temp);
+	dev_dbg(&pdev->dev, "SMBREV = 0x%X\n", temp);
+	dev_dbg(&pdev->dev, "VT596_smba = 0x%X\n", vt596_smba);
+
+	vt596_adapter.dev.parent = &pdev->dev;
+	snprintf(vt596_adapter.name, I2C_NAME_SIZE,
+			"SMBus Via Pro adapter at %04x", vt596_smba);
+	
+	vt596_pdev = pci_dev_get(pdev);
+	if (i2c_add_adapter(&vt596_adapter)) {
+		pci_dev_put(vt596_pdev);
+		vt596_pdev = NULL;
+	}
+
+	/* Always return failure here.  This is to allow other drivers to bind
+	 * to this pci device.  We don't really want to have control over the
+	 * pci device, we only wanted to read as few register values from it.
+	 */
+	return -ENODEV;
+
+ release_region:
+	release_region(vt596_smba, 8);
+	return error;
+}
+
+static struct pci_device_id vt596_ids[] = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C596_3),
+	  .driver_data = SMBBA1 },
+	{ PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C596B_3),
+	  .driver_data = SMBBA1 },
+	{ PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686_4),
+	  .driver_data = SMBBA1 },
+	{ PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8233_0),
+	  .driver_data = SMBBA3 },
+	{ PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8233A),
+	  .driver_data = SMBBA3 },
+	{ PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8235),
+	  .driver_data = SMBBA3 },
+	{ PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237),
+	  .driver_data = SMBBA3 },
+	{ PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8231_4),
+	  .driver_data = SMBBA1 },
+	{ 0, }
+};
+
+MODULE_DEVICE_TABLE (pci, vt596_ids);
+
+static struct pci_driver vt596_driver = {
+	.name		= "vt596_smbus",
+	.id_table	= vt596_ids,
+	.probe		= vt596_probe,
+};
+
+static int __init i2c_vt596_init(void)
+{
+	return pci_register_driver(&vt596_driver);
+}
+
+
+static void __exit i2c_vt596_exit(void)
+{
+	pci_unregister_driver(&vt596_driver);
+	if (vt596_pdev != NULL) {
+		i2c_del_adapter(&vt596_adapter);
+		release_region(vt596_smba, 8);
+		pci_dev_put(vt596_pdev);
+		vt596_pdev = NULL;
+	}
+}
+
+MODULE_AUTHOR(
+    "Frodo Looijaard <frodol@dds.nl> and "
+    "Philip Edelbrock <phil@netroedge.com>");
+MODULE_DESCRIPTION("vt82c596 SMBus driver");
+MODULE_LICENSE("GPL");
+
+module_init(i2c_vt596_init);
+module_exit(i2c_vt596_exit);
diff --git a/drivers/i2c/busses/i2c-voodoo3.c b/drivers/i2c/busses/i2c-voodoo3.c
new file mode 100644
index 00000000000..3edf0e34155
--- /dev/null
+++ b/drivers/i2c/busses/i2c-voodoo3.c
@@ -0,0 +1,254 @@
+/*
+    voodoo3.c - Part of lm_sensors, Linux kernel modules for hardware
+              monitoring
+    Copyright (c) 1998, 1999  Frodo Looijaard <frodol@dds.nl>,
+    Philip Edelbrock <phil@netroedge.com>,
+    Ralph Metzler <rjkm@thp.uni-koeln.de>, and
+    Mark D. Studebaker <mdsxyz123@yahoo.com>
+    
+    Based on code written by Ralph Metzler <rjkm@thp.uni-koeln.de> and
+    Simon Vogl
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+/* This interfaces to the I2C bus of the Voodoo3 to gain access to
+    the BT869 and possibly other I2C devices. */
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/i2c.h>
+#include <linux/i2c-algo-bit.h>
+#include <asm/io.h>
+
+/* the only registers we use */
+#define REG		0x78
+#define REG2 		0x70
+
+/* bit locations in the register */
+#define DDC_ENAB	0x00040000
+#define DDC_SCL_OUT	0x00080000
+#define DDC_SDA_OUT	0x00100000
+#define DDC_SCL_IN	0x00200000
+#define DDC_SDA_IN	0x00400000
+#define I2C_ENAB	0x00800000
+#define I2C_SCL_OUT	0x01000000
+#define I2C_SDA_OUT	0x02000000
+#define I2C_SCL_IN	0x04000000
+#define I2C_SDA_IN	0x08000000
+
+/* initialization states */
+#define INIT2		0x2
+#define INIT3		0x4
+
+/* delays */
+#define CYCLE_DELAY	10
+#define TIMEOUT		(HZ / 2)
+
+
+static void __iomem *ioaddr;
+
+/* The voo GPIO registers don't have individual masks for each bit
+   so we always have to read before writing. */
+
+static void bit_vooi2c_setscl(void *data, int val)
+{
+	unsigned int r;
+	r = readl(ioaddr + REG);
+	if (val)
+		r |= I2C_SCL_OUT;
+	else
+		r &= ~I2C_SCL_OUT;
+	writel(r, ioaddr + REG);
+	readl(ioaddr + REG);	/* flush posted write */
+}
+
+static void bit_vooi2c_setsda(void *data, int val)
+{
+	unsigned int r;
+	r = readl(ioaddr + REG);
+	if (val)
+		r |= I2C_SDA_OUT;
+	else
+		r &= ~I2C_SDA_OUT;
+	writel(r, ioaddr + REG);
+	readl(ioaddr + REG);	/* flush posted write */
+}
+
+/* The GPIO pins are open drain, so the pins always remain outputs.
+   We rely on the i2c-algo-bit routines to set the pins high before
+   reading the input from other chips. */
+
+static int bit_vooi2c_getscl(void *data)
+{
+	return (0 != (readl(ioaddr + REG) & I2C_SCL_IN));
+}
+
+static int bit_vooi2c_getsda(void *data)
+{
+	return (0 != (readl(ioaddr + REG) & I2C_SDA_IN));
+}
+
+static void bit_vooddc_setscl(void *data, int val)
+{
+	unsigned int r;
+	r = readl(ioaddr + REG);
+	if (val)
+		r |= DDC_SCL_OUT;
+	else
+		r &= ~DDC_SCL_OUT;
+	writel(r, ioaddr + REG);
+	readl(ioaddr + REG);	/* flush posted write */
+}
+
+static void bit_vooddc_setsda(void *data, int val)
+{
+	unsigned int r;
+	r = readl(ioaddr + REG);
+	if (val)
+		r |= DDC_SDA_OUT;
+	else
+		r &= ~DDC_SDA_OUT;
+	writel(r, ioaddr + REG);
+	readl(ioaddr + REG);	/* flush posted write */
+}
+
+static int bit_vooddc_getscl(void *data)
+{
+	return (0 != (readl(ioaddr + REG) & DDC_SCL_IN));
+}
+
+static int bit_vooddc_getsda(void *data)
+{
+	return (0 != (readl(ioaddr + REG) & DDC_SDA_IN));
+}
+
+static int config_v3(struct pci_dev *dev)
+{
+	unsigned long cadr;
+
+	/* map Voodoo3 memory */
+	cadr = dev->resource[0].start;
+	cadr &= PCI_BASE_ADDRESS_MEM_MASK;
+	ioaddr = ioremap_nocache(cadr, 0x1000);
+	if (ioaddr) {
+		writel(0x8160, ioaddr + REG2);
+		writel(0xcffc0020, ioaddr + REG);
+		dev_info(&dev->dev, "Using Banshee/Voodoo3 I2C device at %p\n", ioaddr);
+		return 0;
+	}
+	return -ENODEV;
+}
+
+static struct i2c_algo_bit_data voo_i2c_bit_data = {
+	.setsda		= bit_vooi2c_setsda,
+	.setscl		= bit_vooi2c_setscl,
+	.getsda		= bit_vooi2c_getsda,
+	.getscl		= bit_vooi2c_getscl,
+	.udelay		= CYCLE_DELAY,
+	.mdelay		= CYCLE_DELAY,
+	.timeout	= TIMEOUT
+};
+
+static struct i2c_adapter voodoo3_i2c_adapter = {
+	.owner		= THIS_MODULE,
+	.class		= I2C_CLASS_TV_ANALOG, 
+	.name		= "I2C Voodoo3/Banshee adapter",
+	.algo_data	= &voo_i2c_bit_data,
+};
+
+static struct i2c_algo_bit_data voo_ddc_bit_data = {
+	.setsda		= bit_vooddc_setsda,
+	.setscl		= bit_vooddc_setscl,
+	.getsda		= bit_vooddc_getsda,
+	.getscl		= bit_vooddc_getscl,
+	.udelay		= CYCLE_DELAY,
+	.mdelay		= CYCLE_DELAY,
+	.timeout	= TIMEOUT
+};
+
+static struct i2c_adapter voodoo3_ddc_adapter = {
+	.owner		= THIS_MODULE,
+	.class		= I2C_CLASS_DDC, 
+	.name		= "DDC Voodoo3/Banshee adapter",
+	.algo_data	= &voo_ddc_bit_data,
+};
+
+static struct pci_device_id voodoo3_ids[] __devinitdata = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_3DFX, PCI_DEVICE_ID_3DFX_VOODOO3) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_3DFX, PCI_DEVICE_ID_3DFX_BANSHEE) },
+	{ 0, }
+};
+
+MODULE_DEVICE_TABLE (pci, voodoo3_ids);
+
+static int __devinit voodoo3_probe(struct pci_dev *dev, const struct pci_device_id *id)
+{
+	int retval;
+
+	retval = config_v3(dev);
+	if (retval)
+		return retval;
+
+	/* set up the sysfs linkage to our parent device */
+	voodoo3_i2c_adapter.dev.parent = &dev->dev;
+	voodoo3_ddc_adapter.dev.parent = &dev->dev;
+
+	retval = i2c_bit_add_bus(&voodoo3_i2c_adapter);
+	if (retval)
+		return retval;
+	retval = i2c_bit_add_bus(&voodoo3_ddc_adapter);
+	if (retval)
+		i2c_bit_del_bus(&voodoo3_i2c_adapter);
+	return retval;
+}
+
+static void __devexit voodoo3_remove(struct pci_dev *dev)
+{
+	i2c_bit_del_bus(&voodoo3_i2c_adapter);
+ 	i2c_bit_del_bus(&voodoo3_ddc_adapter);
+	iounmap(ioaddr);
+}
+
+static struct pci_driver voodoo3_driver = {
+	.name		= "voodoo3_smbus",
+	.id_table	= voodoo3_ids,
+	.probe		= voodoo3_probe,
+	.remove		= __devexit_p(voodoo3_remove),
+};
+
+static int __init i2c_voodoo3_init(void)
+{
+	return pci_register_driver(&voodoo3_driver);
+}
+
+static void __exit i2c_voodoo3_exit(void)
+{
+	pci_unregister_driver(&voodoo3_driver);
+}
+
+
+MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl>, "
+		"Philip Edelbrock <phil@netroedge.com>, "
+		"Ralph Metzler <rjkm@thp.uni-koeln.de>, "
+		"and Mark D. Studebaker <mdsxyz123@yahoo.com>");
+MODULE_DESCRIPTION("Voodoo3 I2C/SMBus driver");
+MODULE_LICENSE("GPL");
+
+module_init(i2c_voodoo3_init);
+module_exit(i2c_voodoo3_exit);
diff --git a/drivers/i2c/busses/scx200_acb.c b/drivers/i2c/busses/scx200_acb.c
new file mode 100644
index 00000000000..1c4159a9362
--- /dev/null
+++ b/drivers/i2c/busses/scx200_acb.c
@@ -0,0 +1,557 @@
+/*  linux/drivers/i2c/scx200_acb.c 
+
+    Copyright (c) 2001,2002 Christer Weinigel <wingel@nano-system.com>
+
+    National Semiconductor SCx200 ACCESS.bus support
+    
+    Based on i2c-keywest.c which is:
+        Copyright (c) 2001 Benjamin Herrenschmidt <benh@kernel.crashing.org>
+        Copyright (c) 2000 Philip Edelbrock <phil@stimpy.netroedge.com>
+    
+    This program is free software; you can redistribute it and/or
+    modify it under the terms of the GNU General Public License as
+    published by the Free Software Foundation; either version 2 of the
+    License, or (at your option) any later version.
+   
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+    General Public License for more details.
+   
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+
+*/
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/i2c.h>
+#include <linux/smp_lock.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <asm/io.h>
+
+#include <linux/scx200.h>
+
+#define NAME "scx200_acb"
+
+MODULE_AUTHOR("Christer Weinigel <wingel@nano-system.com>");
+MODULE_DESCRIPTION("NatSemi SCx200 ACCESS.bus Driver");
+MODULE_LICENSE("GPL");
+
+#define MAX_DEVICES 4
+static int base[MAX_DEVICES] = { 0x820, 0x840 };
+module_param_array(base, int, NULL, 0);
+MODULE_PARM_DESC(base, "Base addresses for the ACCESS.bus controllers");
+
+#ifdef DEBUG
+#define DBG(x...) printk(KERN_DEBUG NAME ": " x)
+#else
+#define DBG(x...)
+#endif
+
+/* The hardware supports interrupt driven mode too, but I haven't
+   implemented that. */
+#define POLLED_MODE 1
+#define POLL_TIMEOUT (HZ)
+
+enum scx200_acb_state {
+	state_idle,
+	state_address,
+	state_command,
+	state_repeat_start,
+	state_quick,
+	state_read,
+	state_write,
+};
+
+static const char *scx200_acb_state_name[] = {
+	"idle",
+	"address",
+	"command",
+	"repeat_start",
+	"quick",
+	"read",
+	"write",
+};
+
+/* Physical interface */
+struct scx200_acb_iface
+{
+	struct scx200_acb_iface *next;
+	struct i2c_adapter adapter;
+	unsigned base;
+	struct semaphore sem;
+
+	/* State machine data */
+	enum scx200_acb_state state;
+	int result;
+	u8 address_byte;
+	u8 command;
+	u8 *ptr;
+	char needs_reset;
+	unsigned len;
+};
+
+/* Register Definitions */
+#define ACBSDA		(iface->base + 0)
+#define ACBST		(iface->base + 1)
+#define    ACBST_SDAST		0x40 /* SDA Status */
+#define    ACBST_BER		0x20 
+#define    ACBST_NEGACK		0x10 /* Negative Acknowledge */
+#define    ACBST_STASTR		0x08 /* Stall After Start */
+#define    ACBST_MASTER		0x02
+#define ACBCST		(iface->base + 2)
+#define    ACBCST_BB		0x02
+#define ACBCTL1		(iface->base + 3)
+#define    ACBCTL1_STASTRE	0x80
+#define    ACBCTL1_NMINTE	0x40
+#define	   ACBCTL1_ACK		0x10
+#define	   ACBCTL1_STOP		0x02
+#define	   ACBCTL1_START	0x01
+#define ACBADDR		(iface->base + 4)
+#define ACBCTL2		(iface->base + 5)
+#define    ACBCTL2_ENABLE	0x01
+
+/************************************************************************/
+
+static void scx200_acb_machine(struct scx200_acb_iface *iface, u8 status)
+{
+	const char *errmsg;
+
+	DBG("state %s, status = 0x%02x\n", 
+	    scx200_acb_state_name[iface->state], status);
+
+	if (status & ACBST_BER) {
+		errmsg = "bus error";
+		goto error;
+	}
+	if (!(status & ACBST_MASTER)) {
+		errmsg = "not master";
+		goto error;
+	}
+	if (status & ACBST_NEGACK)
+		goto negack;
+
+	switch (iface->state) {
+	case state_idle:
+		dev_warn(&iface->adapter.dev, "interrupt in idle state\n");
+		break;
+
+	case state_address:
+		/* Do a pointer write first */
+		outb(iface->address_byte & ~1, ACBSDA);
+
+		iface->state = state_command;
+		break;
+
+	case state_command:
+		outb(iface->command, ACBSDA);
+
+		if (iface->address_byte & 1)
+			iface->state = state_repeat_start;
+		else
+			iface->state = state_write;
+		break;
+
+	case state_repeat_start:
+		outb(inb(ACBCTL1) | ACBCTL1_START, ACBCTL1);
+		/* fallthrough */
+		
+	case state_quick:
+		if (iface->address_byte & 1) {
+			if (iface->len == 1) 
+				outb(inb(ACBCTL1) | ACBCTL1_ACK, ACBCTL1);
+			else
+				outb(inb(ACBCTL1) & ~ACBCTL1_ACK, ACBCTL1);
+			outb(iface->address_byte, ACBSDA);
+
+			iface->state = state_read;
+		} else {
+			outb(iface->address_byte, ACBSDA);
+
+			iface->state = state_write;
+		}
+		break;
+
+	case state_read:
+		/* Set ACK if receiving the last byte */
+		if (iface->len == 1)
+			outb(inb(ACBCTL1) | ACBCTL1_ACK, ACBCTL1);
+		else
+			outb(inb(ACBCTL1) & ~ACBCTL1_ACK, ACBCTL1);
+
+		*iface->ptr++ = inb(ACBSDA);
+		--iface->len;
+
+		if (iface->len == 0) {
+			iface->result = 0;
+			iface->state = state_idle;
+			outb(inb(ACBCTL1) | ACBCTL1_STOP, ACBCTL1);
+		}
+
+		break;
+
+	case state_write:
+		if (iface->len == 0) {
+			iface->result = 0;
+			iface->state = state_idle;
+			outb(inb(ACBCTL1) | ACBCTL1_STOP, ACBCTL1);
+			break;
+		}
+		
+		outb(*iface->ptr++, ACBSDA);
+		--iface->len;
+		
+		break;
+	}
+
+	return;
+
+ negack:
+	DBG("negative acknowledge in state %s\n", 
+	    scx200_acb_state_name[iface->state]);
+
+	iface->state = state_idle;
+	iface->result = -ENXIO;
+
+	outb(inb(ACBCTL1) | ACBCTL1_STOP, ACBCTL1);
+	outb(ACBST_STASTR | ACBST_NEGACK, ACBST);
+	return;
+
+ error:
+	dev_err(&iface->adapter.dev, "%s in state %s\n", errmsg,
+		scx200_acb_state_name[iface->state]);
+
+	iface->state = state_idle;
+	iface->result = -EIO;
+	iface->needs_reset = 1;
+}
+
+static void scx200_acb_timeout(struct scx200_acb_iface *iface) 
+{
+	dev_err(&iface->adapter.dev, "timeout in state %s\n",
+		scx200_acb_state_name[iface->state]);
+
+	iface->state = state_idle;
+	iface->result = -EIO;
+	iface->needs_reset = 1;
+}
+
+#ifdef POLLED_MODE
+static void scx200_acb_poll(struct scx200_acb_iface *iface)
+{
+	u8 status = 0;
+	unsigned long timeout;
+
+	timeout = jiffies + POLL_TIMEOUT;
+	while (time_before(jiffies, timeout)) {
+		status = inb(ACBST);
+		if ((status & (ACBST_SDAST|ACBST_BER|ACBST_NEGACK)) != 0) {
+			scx200_acb_machine(iface, status);
+			return;
+		}
+		msleep(10);
+	}
+
+	scx200_acb_timeout(iface);
+}
+#endif /* POLLED_MODE */
+
+static void scx200_acb_reset(struct scx200_acb_iface *iface)
+{
+	/* Disable the ACCESS.bus device and Configure the SCL
+           frequency: 16 clock cycles */
+	outb(0x70, ACBCTL2);
+	/* Polling mode */
+	outb(0, ACBCTL1);
+	/* Disable slave address */
+	outb(0, ACBADDR);
+	/* Enable the ACCESS.bus device */
+	outb(inb(ACBCTL2) | ACBCTL2_ENABLE, ACBCTL2);
+	/* Free STALL after START */
+	outb(inb(ACBCTL1) & ~(ACBCTL1_STASTRE | ACBCTL1_NMINTE), ACBCTL1);
+	/* Send a STOP */
+	outb(inb(ACBCTL1) | ACBCTL1_STOP, ACBCTL1);
+	/* Clear BER, NEGACK and STASTR bits */
+	outb(ACBST_BER | ACBST_NEGACK | ACBST_STASTR, ACBST);
+	/* Clear BB bit */
+	outb(inb(ACBCST) | ACBCST_BB, ACBCST);
+}
+
+static s32 scx200_acb_smbus_xfer(struct i2c_adapter *adapter,
+				u16 address, unsigned short flags,	
+				char rw, u8 command, int size, 
+				union i2c_smbus_data *data)
+{
+	struct scx200_acb_iface *iface = i2c_get_adapdata(adapter);
+	int len;
+	u8 *buffer;
+	u16 cur_word;
+	int rc;
+
+	switch (size) {
+	case I2C_SMBUS_QUICK:
+	    	len = 0;
+	    	buffer = NULL;
+	    	break;
+	case I2C_SMBUS_BYTE:
+		if (rw == I2C_SMBUS_READ) {
+			len = 1;
+			buffer = &data->byte;
+		} else {
+			len = 1;
+			buffer = &command;
+		}
+	    	break;
+	case I2C_SMBUS_BYTE_DATA:
+	    	len = 1;
+	    	buffer = &data->byte;
+	    	break;
+	case I2C_SMBUS_WORD_DATA:
+		len = 2;
+	    	cur_word = cpu_to_le16(data->word);
+	    	buffer = (u8 *)&cur_word;
+		break;
+	case I2C_SMBUS_BLOCK_DATA:
+	    	len = data->block[0];
+	    	buffer = &data->block[1];
+		break;
+	default:
+	    	return -EINVAL;
+	}
+
+	DBG("size=%d, address=0x%x, command=0x%x, len=%d, read=%d\n",
+	    size, address, command, len, rw == I2C_SMBUS_READ);
+
+	if (!len && rw == I2C_SMBUS_READ) {
+		dev_warn(&adapter->dev, "zero length read\n");
+		return -EINVAL;
+	}
+
+	if (len && !buffer) {
+		dev_warn(&adapter->dev, "nonzero length but no buffer\n");
+		return -EFAULT;
+	}
+
+	down(&iface->sem);
+
+	iface->address_byte = address<<1;
+	if (rw == I2C_SMBUS_READ)
+		iface->address_byte |= 1;
+	iface->command = command;
+	iface->ptr = buffer;
+	iface->len = len;
+	iface->result = -EINVAL;
+	iface->needs_reset = 0;
+
+	outb(inb(ACBCTL1) | ACBCTL1_START, ACBCTL1);
+
+	if (size == I2C_SMBUS_QUICK || size == I2C_SMBUS_BYTE)
+		iface->state = state_quick;
+	else
+		iface->state = state_address;
+
+#ifdef POLLED_MODE
+	while (iface->state != state_idle)
+		scx200_acb_poll(iface);
+#else /* POLLED_MODE */
+#error Interrupt driven mode not implemented
+#endif /* POLLED_MODE */	
+
+	if (iface->needs_reset)
+		scx200_acb_reset(iface);
+
+	rc = iface->result;
+
+	up(&iface->sem);
+
+	if (rc == 0 && size == I2C_SMBUS_WORD_DATA && rw == I2C_SMBUS_READ)
+	    	data->word = le16_to_cpu(cur_word);
+
+#ifdef DEBUG
+	DBG(": transfer done, result: %d", rc);
+	if (buffer) {
+		int i;
+		printk(" data:");
+		for (i = 0; i < len; ++i)
+			printk(" %02x", buffer[i]);
+	}
+	printk("\n");
+#endif
+
+	return rc;
+}
+
+static u32 scx200_acb_func(struct i2c_adapter *adapter)
+{
+	return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE |
+	       I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA |
+	       I2C_FUNC_SMBUS_BLOCK_DATA;
+}
+
+/* For now, we only handle combined mode (smbus) */
+static struct i2c_algorithm scx200_acb_algorithm = {
+	.name		= "NatSemi SCx200 ACCESS.bus",
+	.id		= I2C_ALGO_SMBUS,
+	.smbus_xfer	= scx200_acb_smbus_xfer,
+	.functionality	= scx200_acb_func,
+};
+
+static struct scx200_acb_iface *scx200_acb_list;
+
+static int scx200_acb_probe(struct scx200_acb_iface *iface)
+{
+	u8 val;
+
+	/* Disable the ACCESS.bus device and Configure the SCL
+           frequency: 16 clock cycles */
+	outb(0x70, ACBCTL2);
+
+	if (inb(ACBCTL2) != 0x70) {
+		DBG("ACBCTL2 readback failed\n");
+		return -ENXIO;
+	}
+
+	outb(inb(ACBCTL1) | ACBCTL1_NMINTE, ACBCTL1);
+
+	val = inb(ACBCTL1);
+	if (val) {
+		DBG("disabled, but ACBCTL1=0x%02x\n", val);
+		return -ENXIO;
+	}
+
+	outb(inb(ACBCTL2) | ACBCTL2_ENABLE, ACBCTL2);
+
+	outb(inb(ACBCTL1) | ACBCTL1_NMINTE, ACBCTL1);
+
+	val = inb(ACBCTL1);
+	if ((val & ACBCTL1_NMINTE) != ACBCTL1_NMINTE) {
+		DBG("enabled, but NMINTE won't be set, ACBCTL1=0x%02x\n", val);
+		return -ENXIO;
+	}
+
+	return 0;
+}
+
+static int  __init scx200_acb_create(int base, int index)
+{
+	struct scx200_acb_iface *iface;
+	struct i2c_adapter *adapter;
+	int rc = 0;
+	char description[64];
+
+	iface = kmalloc(sizeof(*iface), GFP_KERNEL);
+	if (!iface) {
+		printk(KERN_ERR NAME ": can't allocate memory\n");
+		rc = -ENOMEM;
+		goto errout;
+	}
+
+	memset(iface, 0, sizeof(*iface));
+	adapter = &iface->adapter;
+	i2c_set_adapdata(adapter, iface);
+	snprintf(adapter->name, I2C_NAME_SIZE, "SCx200 ACB%d", index);
+	adapter->owner = THIS_MODULE;
+	adapter->id = I2C_ALGO_SMBUS;
+	adapter->algo = &scx200_acb_algorithm;
+	adapter->class = I2C_CLASS_HWMON;
+
+	init_MUTEX(&iface->sem);
+
+	snprintf(description, sizeof(description), "NatSemi SCx200 ACCESS.bus [%s]", adapter->name);
+	if (request_region(base, 8, description) == 0) {
+		dev_err(&adapter->dev, "can't allocate io 0x%x-0x%x\n",
+			base, base + 8-1);
+		rc = -EBUSY;
+		goto errout;
+	}
+	iface->base = base;
+
+	rc = scx200_acb_probe(iface);
+	if (rc) {
+		dev_warn(&adapter->dev, "probe failed\n");
+		goto errout;
+	}
+
+	scx200_acb_reset(iface);
+
+	if (i2c_add_adapter(adapter) < 0) {
+		dev_err(&adapter->dev, "failed to register\n");
+		rc = -ENODEV;
+		goto errout;
+	}
+
+	lock_kernel();
+	iface->next = scx200_acb_list;
+	scx200_acb_list = iface;
+	unlock_kernel();
+
+	return 0;
+
+ errout:
+	if (iface) {
+		if (iface->base)
+			release_region(iface->base, 8);
+		kfree(iface);
+	}
+	return rc;
+}
+
+static struct pci_device_id scx200[] = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_SCx200_BRIDGE) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_SC1100_BRIDGE) },
+	{ },
+};
+
+static int __init scx200_acb_init(void)
+{
+	int i;
+	int rc;
+
+	pr_debug(NAME ": NatSemi SCx200 ACCESS.bus Driver\n");
+
+	/* Verify that this really is a SCx200 processor */
+	if (pci_dev_present(scx200) == 0)
+		return -ENODEV;
+
+	rc = -ENXIO;
+	for (i = 0; i < MAX_DEVICES; ++i) {
+		if (base[i] > 0)
+			rc = scx200_acb_create(base[i], i);
+	}
+	if (scx200_acb_list)
+		return 0;
+	return rc;
+}
+
+static void __exit scx200_acb_cleanup(void)
+{
+	struct scx200_acb_iface *iface;
+	lock_kernel();
+	while ((iface = scx200_acb_list) != NULL) {
+		scx200_acb_list = iface->next;
+		unlock_kernel();
+
+		i2c_del_adapter(&iface->adapter);
+		release_region(iface->base, 8);
+		kfree(iface);
+		lock_kernel();
+	}
+	unlock_kernel();
+}
+
+module_init(scx200_acb_init);
+module_exit(scx200_acb_cleanup);
+
+/*
+    Local variables:
+        compile-command: "make -k -C ../.. SUBDIRS=drivers/i2c modules"
+        c-basic-offset: 8
+    End:
+*/
+
diff --git a/drivers/i2c/busses/scx200_i2c.c b/drivers/i2c/busses/scx200_i2c.c
new file mode 100644
index 00000000000..27fbfecc414
--- /dev/null
+++ b/drivers/i2c/busses/scx200_i2c.c
@@ -0,0 +1,131 @@
+/* linux/drivers/i2c/scx200_i2c.c 
+
+   Copyright (c) 2001,2002 Christer Weinigel <wingel@nano-system.com>
+
+   National Semiconductor SCx200 I2C bus on GPIO pins
+
+   Based on i2c-velleman.c Copyright (C) 1995-96, 2000 Simon G. Vogl
+
+   This program is free software; you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation; either version 2 of the License, or
+   (at your option) any later version.
+   
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+   
+   You should have received a copy of the GNU General Public License
+   along with this program; if not, write to the Free Software
+   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.		     
+*/
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/i2c.h>
+#include <linux/i2c-algo-bit.h>
+#include <asm/io.h>
+
+#include <linux/scx200_gpio.h>
+
+#define NAME "scx200_i2c"
+
+MODULE_AUTHOR("Christer Weinigel <wingel@nano-system.com>");
+MODULE_DESCRIPTION("NatSemi SCx200 I2C Driver");
+MODULE_LICENSE("GPL");
+
+static int scl = CONFIG_SCx200_I2C_SCL;
+static int sda = CONFIG_SCx200_I2C_SDA;
+
+module_param(scl, int, 0);
+MODULE_PARM_DESC(scl, "GPIO line for SCL");
+module_param(sda, int, 0);
+MODULE_PARM_DESC(sda, "GPIO line for SDA");
+
+static void scx200_i2c_setscl(void *data, int state)
+{
+	scx200_gpio_set(scl, state);
+}
+
+static void scx200_i2c_setsda(void *data, int state)
+{
+	scx200_gpio_set(sda, state);
+} 
+
+static int scx200_i2c_getscl(void *data)
+{
+	return scx200_gpio_get(scl);
+}
+
+static int scx200_i2c_getsda(void *data)
+{
+	return scx200_gpio_get(sda);
+}
+
+/* ------------------------------------------------------------------------
+ * Encapsulate the above functions in the correct operations structure.
+ * This is only done when more than one hardware adapter is supported.
+ */
+
+static struct i2c_algo_bit_data scx200_i2c_data = {
+	NULL,
+	scx200_i2c_setsda,
+	scx200_i2c_setscl,
+	scx200_i2c_getsda,
+	scx200_i2c_getscl,
+	10, 10, 100,		/* waits, timeout */
+};
+
+static struct i2c_adapter scx200_i2c_ops = {
+	.owner		   = THIS_MODULE,
+	.algo_data	   = &scx200_i2c_data,
+	.name	= "NatSemi SCx200 I2C",
+};
+
+static int scx200_i2c_init(void)
+{
+	pr_debug(NAME ": NatSemi SCx200 I2C Driver\n");
+
+	if (!scx200_gpio_present()) {
+		printk(KERN_ERR NAME ": no SCx200 gpio pins available\n");
+		return -ENODEV;
+	}
+
+	pr_debug(NAME ": SCL=GPIO%02u, SDA=GPIO%02u\n", scl, sda);
+
+	if (scl == -1 || sda == -1 || scl == sda) {
+		printk(KERN_ERR NAME ": scl and sda must be specified\n");
+		return -EINVAL;
+	}
+
+	/* Configure GPIOs as open collector outputs */
+	scx200_gpio_configure(scl, ~2, 5);
+	scx200_gpio_configure(sda, ~2, 5);
+
+	if (i2c_bit_add_bus(&scx200_i2c_ops) < 0) {
+		printk(KERN_ERR NAME ": adapter %s registration failed\n", 
+		       scx200_i2c_ops.name);
+		return -ENODEV;
+	}
+	
+	return 0;
+}
+
+static void scx200_i2c_cleanup(void)
+{
+	i2c_bit_del_bus(&scx200_i2c_ops);
+}
+
+module_init(scx200_i2c_init);
+module_exit(scx200_i2c_cleanup);
+
+/*
+    Local variables:
+        compile-command: "make -k -C ../.. SUBDIRS=drivers/i2c modules"
+        c-basic-offset: 8
+    End:
+*/
diff --git a/drivers/i2c/chips/Kconfig b/drivers/i2c/chips/Kconfig
new file mode 100644
index 00000000000..74d23cfce2a
--- /dev/null
+++ b/drivers/i2c/chips/Kconfig
@@ -0,0 +1,443 @@
+#
+# I2C Sensor device configuration
+#
+
+menu "Hardware Sensors Chip support"
+	depends on I2C
+
+config I2C_SENSOR
+	tristate
+	default n
+
+config SENSORS_ADM1021
+	tristate "Analog Devices ADM1021 and compatibles"
+	depends on I2C && EXPERIMENTAL
+	select I2C_SENSOR
+	help
+	  If you say yes here you get support for Analog Devices ADM1021 
+	  and ADM1023 sensor chips and clones: Maxim MAX1617 and MAX1617A,
+	  Genesys Logic GL523SM, National Semiconductor LM84, TI THMC10,
+	  and the XEON processor built-in sensor.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called adm1021.
+
+config SENSORS_ADM1025
+	tristate "Analog Devices ADM1025 and compatibles"
+	depends on I2C && EXPERIMENTAL
+	select I2C_SENSOR
+	help
+	  If you say yes here you get support for Analog Devices ADM1025
+	  and Philips NE1619 sensor chips.
+	  This driver can also be built as a module.  If so, the module
+	  will be called adm1025.
+
+config SENSORS_ADM1026
+	tristate "Analog Devices ADM1026 and compatibles"
+	depends on I2C && EXPERIMENTAL
+	select I2C_SENSOR
+	help
+	  If you say yes here you get support for Analog Devices ADM1026
+	  This driver can also be built as a module.  If so, the module
+	  will be called adm1026.
+
+config SENSORS_ADM1031
+	tristate "Analog Devices ADM1031 and compatibles"
+	depends on I2C && EXPERIMENTAL
+	select I2C_SENSOR
+	help
+	  If you say yes here you get support for Analog Devices ADM1031 
+	  and ADM1030 sensor chips.
+	  This driver can also be built as a module.  If so, the module
+	  will be called adm1031.
+
+config SENSORS_ASB100
+	tristate "Asus ASB100 Bach"
+	depends on I2C && EXPERIMENTAL
+	select I2C_SENSOR
+	help
+	  If you say yes here you get support for the ASB100 Bach sensor
+	  chip found on some Asus mainboards.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called asb100.
+
+config SENSORS_DS1621
+	tristate "Dallas Semiconductor DS1621 and DS1625"
+	depends on I2C && EXPERIMENTAL
+	select I2C_SENSOR
+	help
+	  If you say yes here you get support for Dallas Semiconductor
+	  DS1621 and DS1625 sensor chips. 
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called ds1621.
+
+config SENSORS_FSCHER
+	tristate "FSC Hermes"
+	depends on I2C && EXPERIMENTAL
+	select I2C_SENSOR
+	help
+	  If you say yes here you get support for Fujitsu Siemens
+	  Computers Hermes sensor chips.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called fscher.
+
+config SENSORS_FSCPOS
+	tristate "FSC Poseidon"
+	depends on I2C && EXPERIMENTAL
+	select I2C_SENSOR
+	help
+	  If you say yes here you get support for Fujitsu Siemens
+	  Computers Poseidon sensor chips.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called fscpos.
+
+config SENSORS_GL518SM
+	tristate "Genesys Logic GL518SM"
+	depends on I2C && EXPERIMENTAL
+	select I2C_SENSOR
+	help
+	  If you say yes here you get support for Genesys Logic GL518SM
+	  sensor chips.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called gl518sm.
+
+config SENSORS_GL520SM
+	tristate "Genesys Logic GL520SM"
+	depends on I2C && EXPERIMENTAL
+	select I2C_SENSOR
+	help
+	  If you say yes here you get support for Genesys Logic GL520SM
+	  sensor chips.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called gl520sm.
+
+config SENSORS_IT87
+	tristate "ITE IT87xx and compatibles"
+	depends on I2C && EXPERIMENTAL
+	select I2C_SENSOR
+	help
+	  If you say yes here you get support for ITE IT87xx sensor chips
+	  and clones: SiS960.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called it87.
+
+config SENSORS_LM63
+	tristate "National Semiconductor LM63"
+	depends on I2C && EXPERIMENTAL
+	select I2C_SENSOR
+	help
+	  If you say yes here you get support for the National Semiconductor
+	  LM63 remote diode digital temperature sensor with integrated fan
+	  control.  Such chips are found on the Tyan S4882 (Thunder K8QS Pro)
+	  motherboard, among others.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called lm63.
+
+config SENSORS_LM75
+	tristate "National Semiconductor LM75 and compatibles"
+	depends on I2C && EXPERIMENTAL
+	select I2C_SENSOR
+	help
+	  If you say yes here you get support for National Semiconductor LM75
+	  sensor chips and clones: Dallas Semiconductor DS75 and DS1775 (in
+	  9-bit precision mode), and TelCom (now Microchip) TCN75.
+
+	  The DS75 and DS1775 in 10- to 12-bit precision modes will require
+	  a force module parameter. The driver will not handle the extra
+	  precision anyhow.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called lm75.
+
+config SENSORS_LM77
+	tristate "National Semiconductor LM77"
+	depends on I2C && EXPERIMENTAL
+	select I2C_SENSOR
+	help
+	  If you say yes here you get support for National Semiconductor LM77
+	  sensor chips.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called lm77.
+
+config SENSORS_LM78
+	tristate "National Semiconductor LM78 and compatibles"
+	depends on I2C && EXPERIMENTAL
+	select I2C_SENSOR
+	help
+	  If you say yes here you get support for National Semiconductor LM78,
+	  LM78-J and LM79.  This can also be built as a module which can be
+	  inserted and removed while the kernel is running.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called lm78.
+
+config SENSORS_LM80
+	tristate "National Semiconductor LM80"
+	depends on I2C && EXPERIMENTAL
+	select I2C_SENSOR
+	help
+	  If you say yes here you get support for National Semiconductor
+	  LM80 sensor chips.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called lm80.
+
+config SENSORS_LM83
+	tristate "National Semiconductor LM83"
+	depends on I2C
+	select I2C_SENSOR
+	help
+	  If you say yes here you get support for National Semiconductor
+	  LM83 sensor chips.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called lm83.
+
+config SENSORS_LM85
+	tristate "National Semiconductor LM85 and compatibles"
+	depends on I2C && EXPERIMENTAL
+	select I2C_SENSOR
+	help
+	  If you say yes here you get support for National Semiconductor LM85
+	  sensor chips and clones: ADT7463 and ADM1027.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called lm85.
+
+config SENSORS_LM87
+	tristate "National Semiconductor LM87"
+	depends on I2C && EXPERIMENTAL
+	select I2C_SENSOR
+	help
+	  If you say yes here you get support for National Semiconductor LM87
+	  sensor chips.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called lm87.
+
+config SENSORS_LM90
+	tristate "National Semiconductor LM90 and compatibles"
+	depends on I2C
+	select I2C_SENSOR
+	help
+	  If you say yes here you get support for National Semiconductor LM90,
+	  LM86, LM89 and LM99, Analog Devices ADM1032 and Maxim MAX6657 and
+	  MAX6658 sensor chips.
+
+	  The Analog Devices ADT7461 sensor chip is also supported, but only
+	  if found in ADM1032 compatibility mode.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called lm90.
+
+config SENSORS_LM92
+	tristate "National Semiconductor LM92 and compatibles"
+	depends on I2C && EXPERIMENTAL
+	select I2C_SENSOR
+	help
+	  If you say yes here you get support for National Semiconductor LM92
+	  and Maxim MAX6635 sensor chips.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called lm92.
+
+config SENSORS_MAX1619
+	tristate "Maxim MAX1619 sensor chip"
+	depends on I2C && EXPERIMENTAL
+	select I2C_SENSOR
+	help
+	  If you say yes here you get support for MAX1619 sensor chip.
+	  
+	  This driver can also be built as a module.  If so, the module
+	  will be called max1619.
+
+config SENSORS_PC87360
+	tristate "National Semiconductor PC87360 family"
+	depends on I2C && EXPERIMENTAL
+	select I2C_SENSOR
+	select I2C_ISA
+	help
+	  If you say yes here you get access to the hardware monitoring
+	  functions of the National Semiconductor PC8736x Super-I/O chips.
+	  The PC87360, PC87363 and PC87364 only have fan monitoring and
+	  control.  The PC87365 and PC87366 additionally have voltage and
+	  temperature monitoring.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called pc87360.
+
+config SENSORS_SMSC47B397
+	tristate "SMSC LPC47B397-NC"
+	depends on I2C && EXPERIMENTAL
+	select I2C_SENSOR
+	select I2C_ISA
+	help
+	  If you say yes here you get support for the SMSC LPC47B397-NC
+	  sensor chip.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called smsc47b397.
+
+config SENSORS_SIS5595
+	tristate "Silicon Integrated Systems Corp. SiS5595"
+	depends on I2C && PCI && EXPERIMENTAL
+	select I2C_SENSOR
+	select I2C_ISA
+	help
+	  If you say yes here you get support for the integrated sensors in
+	  SiS5595 South Bridges.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called sis5595.
+
+config SENSORS_SMSC47M1
+	tristate "SMSC LPC47M10x and compatibles"
+	depends on I2C && EXPERIMENTAL
+	select I2C_SENSOR
+	select I2C_ISA
+	help
+	  If you say yes here you get support for the integrated fan
+	  monitoring and control capabilities of the SMSC LPC47B27x,
+	  LPC47M10x, LPC47M13x and LPC47M14x chips.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called smsc47m1.
+
+config SENSORS_VIA686A
+	tristate "VIA686A"
+	depends on I2C && PCI && EXPERIMENTAL
+	select I2C_SENSOR
+	select I2C_ISA
+	help
+	  If you say yes here you get support for the integrated sensors in
+	  Via 686A/B South Bridges.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called via686a.
+
+config SENSORS_W83781D
+	tristate "Winbond W83781D, W83782D, W83783S, W83627HF, Asus AS99127F"
+	depends on I2C && EXPERIMENTAL
+	select I2C_SENSOR
+	help
+	  If you say yes here you get support for the Winbond W8378x series
+	  of sensor chips: the W83781D, W83782D, W83783S and W83627HF,
+	  and the similar Asus AS99127F.
+	  
+	  This driver can also be built as a module.  If so, the module
+	  will be called w83781d.
+
+config SENSORS_W83L785TS
+	tristate "Winbond W83L785TS-S"
+	depends on I2C && EXPERIMENTAL
+	select I2C_SENSOR
+	help
+	  If you say yes here you get support for the Winbond W83L785TS-S
+	  sensor chip, which is used on the Asus A7N8X, among other
+	  motherboards.
+	  
+	  This driver can also be built as a module.  If so, the module
+	  will be called w83l785ts.
+
+config SENSORS_W83627HF
+	tristate "Winbond W83627HF, W83627THF, W83637HF, W83697HF"
+	depends on I2C && EXPERIMENTAL
+	select I2C_SENSOR
+	select I2C_ISA
+	help
+	  If you say yes here you get support for the Winbond W836X7 series
+	  of sensor chips: the W83627HF, W83627THF, W83637HF, and the W83697HF
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called w83627hf.
+
+endmenu
+
+menu "Other I2C Chip support"
+	depends on I2C
+
+config SENSORS_DS1337
+	tristate "Dallas Semiconductor DS1337 Real Time Clock"
+	depends on I2C && EXPERIMENTAL
+	select I2C_SENSOR
+	help
+	  If you say yes here you get support for Dallas Semiconductor
+	  DS1337 real-time clock chips. 
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called ds1337.
+
+config SENSORS_EEPROM
+	tristate "EEPROM reader"
+	depends on I2C && EXPERIMENTAL
+	select I2C_SENSOR
+	help
+	  If you say yes here you get read-only access to the EEPROM data
+	  available on modern memory DIMMs and Sony Vaio laptops.  Such
+	  EEPROMs could theoretically be available on other devices as well.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called eeprom.
+
+config SENSORS_PCF8574
+	tristate "Philips PCF8574 and PCF8574A"
+	depends on I2C && EXPERIMENTAL
+	select I2C_SENSOR
+	help
+	  If you say yes here you get support for Philips PCF8574 and 
+	  PCF8574A chips.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called pcf8574.
+
+config SENSORS_PCF8591
+	tristate "Philips PCF8591"
+	depends on I2C && EXPERIMENTAL
+	select I2C_SENSOR
+	help
+	  If you say yes here you get support for Philips PCF8591 chips.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called pcf8591.
+
+config SENSORS_RTC8564
+	tristate "Epson 8564 RTC chip"
+	depends on I2C && EXPERIMENTAL
+	select I2C_SENSOR
+	help
+	  If you say yes here you get support for the Epson 8564 RTC chip.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called i2c-rtc8564.
+
+config ISP1301_OMAP
+	tristate "Philips ISP1301 with OMAP OTG"
+	depends on I2C && ARCH_OMAP_OTG
+	help
+	  If you say yes here you get support for the Philips ISP1301
+	  USB-On-The-Go transceiver working with the OMAP OTG controller.
+	  The ISP1301 is used in products including H2 and H3 development
+	  boards for Texas Instruments OMAP processors.
+	  
+	  This driver can also be built as a module.  If so, the module
+	  will be called isp1301_omap.
+
+config SENSORS_M41T00
+	tristate "ST M41T00 RTC chip"
+	depends on I2C && PPC32
+	help
+	  If you say yes here you get support for the ST M41T00 RTC chip.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called m41t00.
+
+endmenu
diff --git a/drivers/i2c/chips/Makefile b/drivers/i2c/chips/Makefile
new file mode 100644
index 00000000000..65599161a17
--- /dev/null
+++ b/drivers/i2c/chips/Makefile
@@ -0,0 +1,48 @@
+#
+# Makefile for the kernel hardware sensors chip drivers.
+#
+
+# asb100, then w83781d go first, as they can override other drivers' addresses.
+obj-$(CONFIG_SENSORS_ASB100)	+= asb100.o
+obj-$(CONFIG_SENSORS_W83627HF)	+= w83627hf.o
+obj-$(CONFIG_SENSORS_W83781D)	+= w83781d.o
+
+obj-$(CONFIG_SENSORS_ADM1021)	+= adm1021.o
+obj-$(CONFIG_SENSORS_ADM1025)	+= adm1025.o
+obj-$(CONFIG_SENSORS_ADM1026)	+= adm1026.o
+obj-$(CONFIG_SENSORS_ADM1031)	+= adm1031.o
+obj-$(CONFIG_SENSORS_DS1337)	+= ds1337.o
+obj-$(CONFIG_SENSORS_DS1621)	+= ds1621.o
+obj-$(CONFIG_SENSORS_EEPROM)	+= eeprom.o
+obj-$(CONFIG_SENSORS_FSCHER)	+= fscher.o
+obj-$(CONFIG_SENSORS_FSCPOS)	+= fscpos.o
+obj-$(CONFIG_SENSORS_GL518SM)	+= gl518sm.o
+obj-$(CONFIG_SENSORS_GL520SM)	+= gl520sm.o
+obj-$(CONFIG_SENSORS_IT87)	+= it87.o
+obj-$(CONFIG_SENSORS_LM63)	+= lm63.o
+obj-$(CONFIG_SENSORS_LM75)	+= lm75.o
+obj-$(CONFIG_SENSORS_LM77)	+= lm77.o
+obj-$(CONFIG_SENSORS_LM78)	+= lm78.o
+obj-$(CONFIG_SENSORS_LM80)	+= lm80.o
+obj-$(CONFIG_SENSORS_LM83)	+= lm83.o
+obj-$(CONFIG_SENSORS_LM85)	+= lm85.o
+obj-$(CONFIG_SENSORS_LM87)	+= lm87.o
+obj-$(CONFIG_SENSORS_LM90)	+= lm90.o
+obj-$(CONFIG_SENSORS_LM92)	+= lm92.o
+obj-$(CONFIG_SENSORS_MAX1619)	+= max1619.o
+obj-$(CONFIG_SENSORS_M41T00)	+= m41t00.o
+obj-$(CONFIG_SENSORS_PC87360)	+= pc87360.o
+obj-$(CONFIG_SENSORS_PCF8574)	+= pcf8574.o
+obj-$(CONFIG_SENSORS_PCF8591)	+= pcf8591.o
+obj-$(CONFIG_SENSORS_RTC8564)	+= rtc8564.o
+obj-$(CONFIG_SENSORS_SIS5595)	+= sis5595.o
+obj-$(CONFIG_SENSORS_SMSC47B397)+= smsc47b397.o
+obj-$(CONFIG_SENSORS_SMSC47M1)	+= smsc47m1.o
+obj-$(CONFIG_SENSORS_VIA686A)	+= via686a.o
+obj-$(CONFIG_SENSORS_W83L785TS)	+= w83l785ts.o
+obj-$(CONFIG_ISP1301_OMAP)	+= isp1301_omap.o
+
+ifeq ($(CONFIG_I2C_DEBUG_CHIP),y)
+EXTRA_CFLAGS += -DDEBUG
+endif
+
diff --git a/drivers/i2c/chips/adm1021.c b/drivers/i2c/chips/adm1021.c
new file mode 100644
index 00000000000..9c59a370b6d
--- /dev/null
+++ b/drivers/i2c/chips/adm1021.c
@@ -0,0 +1,411 @@
+/*
+    adm1021.c - Part of lm_sensors, Linux kernel modules for hardware
+             monitoring
+    Copyright (c) 1998, 1999  Frodo Looijaard <frodol@dds.nl> and
+    Philip Edelbrock <phil@netroedge.com>
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/jiffies.h>
+#include <linux/i2c.h>
+#include <linux/i2c-sensor.h>
+
+
+/* Addresses to scan */
+static unsigned short normal_i2c[] = { 0x18, 0x19, 0x1a,
+					0x29, 0x2a, 0x2b,
+					0x4c, 0x4d, 0x4e, 
+					I2C_CLIENT_END };
+static unsigned int normal_isa[] = { I2C_CLIENT_ISA_END };
+
+/* Insmod parameters */
+SENSORS_INSMOD_8(adm1021, adm1023, max1617, max1617a, thmc10, lm84, gl523sm, mc1066);
+
+/* adm1021 constants specified below */
+
+/* The adm1021 registers */
+/* Read-only */
+#define ADM1021_REG_TEMP		0x00
+#define ADM1021_REG_REMOTE_TEMP		0x01
+#define ADM1021_REG_STATUS		0x02
+#define ADM1021_REG_MAN_ID		0x0FE	/* 0x41 = AMD, 0x49 = TI, 0x4D = Maxim, 0x23 = Genesys , 0x54 = Onsemi*/
+#define ADM1021_REG_DEV_ID		0x0FF	/* ADM1021 = 0x0X, ADM1023 = 0x3X */
+#define ADM1021_REG_DIE_CODE		0x0FF	/* MAX1617A */
+/* These use different addresses for reading/writing */
+#define ADM1021_REG_CONFIG_R		0x03
+#define ADM1021_REG_CONFIG_W		0x09
+#define ADM1021_REG_CONV_RATE_R		0x04
+#define ADM1021_REG_CONV_RATE_W		0x0A
+/* These are for the ADM1023's additional precision on the remote temp sensor */
+#define ADM1021_REG_REM_TEMP_PREC	0x010
+#define ADM1021_REG_REM_OFFSET		0x011
+#define ADM1021_REG_REM_OFFSET_PREC	0x012
+#define ADM1021_REG_REM_TOS_PREC	0x013
+#define ADM1021_REG_REM_THYST_PREC	0x014
+/* limits */
+#define ADM1021_REG_TOS_R		0x05
+#define ADM1021_REG_TOS_W		0x0B
+#define ADM1021_REG_REMOTE_TOS_R	0x07
+#define ADM1021_REG_REMOTE_TOS_W	0x0D
+#define ADM1021_REG_THYST_R		0x06
+#define ADM1021_REG_THYST_W		0x0C
+#define ADM1021_REG_REMOTE_THYST_R	0x08
+#define ADM1021_REG_REMOTE_THYST_W	0x0E
+/* write-only */
+#define ADM1021_REG_ONESHOT		0x0F
+
+
+/* Conversions. Rounding and limit checking is only done on the TO_REG
+   variants. Note that you should be a bit careful with which arguments
+   these macros are called: arguments may be evaluated more than once.
+   Fixing this is just not worth it. */
+/* Conversions  note: 1021 uses normal integer signed-byte format*/
+#define TEMP_FROM_REG(val)	(val > 127 ? (val-256)*1000 : val*1000)
+#define TEMP_TO_REG(val)	(SENSORS_LIMIT((val < 0 ? (val/1000)+256 : val/1000),0,255))
+
+/* Initial values */
+
+/* Note: Even though I left the low and high limits named os and hyst, 
+they don't quite work like a thermostat the way the LM75 does.  I.e., 
+a lower temp than THYST actually triggers an alarm instead of 
+clearing it.  Weird, ey?   --Phil  */
+
+/* Each client has this additional data */
+struct adm1021_data {
+	struct i2c_client client;
+	enum chips type;
+
+	struct semaphore update_lock;
+	char valid;		/* !=0 if following fields are valid */
+	unsigned long last_updated;	/* In jiffies */
+
+	u8	temp_max;	/* Register values */
+	u8	temp_hyst;
+	u8	temp_input;
+	u8	remote_temp_max;
+	u8	remote_temp_hyst;
+	u8	remote_temp_input;
+	u8	alarms;
+	/* special values for ADM1021 only */
+	u8	die_code;
+        /* Special values for ADM1023 only */
+	u8	remote_temp_prec;
+	u8	remote_temp_os_prec;
+	u8	remote_temp_hyst_prec;
+	u8	remote_temp_offset;
+	u8	remote_temp_offset_prec;
+};
+
+static int adm1021_attach_adapter(struct i2c_adapter *adapter);
+static int adm1021_detect(struct i2c_adapter *adapter, int address, int kind);
+static void adm1021_init_client(struct i2c_client *client);
+static int adm1021_detach_client(struct i2c_client *client);
+static int adm1021_read_value(struct i2c_client *client, u8 reg);
+static int adm1021_write_value(struct i2c_client *client, u8 reg,
+			       u16 value);
+static struct adm1021_data *adm1021_update_device(struct device *dev);
+
+/* (amalysh) read only mode, otherwise any limit's writing confuse BIOS */
+static int read_only = 0;
+
+
+/* This is the driver that will be inserted */
+static struct i2c_driver adm1021_driver = {
+	.owner		= THIS_MODULE,
+	.name		= "adm1021",
+	.id		= I2C_DRIVERID_ADM1021,
+	.flags		= I2C_DF_NOTIFY,
+	.attach_adapter	= adm1021_attach_adapter,
+	.detach_client	= adm1021_detach_client,
+};
+
+#define show(value)	\
+static ssize_t show_##value(struct device *dev, char *buf)		\
+{									\
+	struct adm1021_data *data = adm1021_update_device(dev);		\
+	return sprintf(buf, "%d\n", TEMP_FROM_REG(data->value));	\
+}
+show(temp_max);
+show(temp_hyst);
+show(temp_input);
+show(remote_temp_max);
+show(remote_temp_hyst);
+show(remote_temp_input);
+
+#define show2(value)	\
+static ssize_t show_##value(struct device *dev, char *buf)		\
+{									\
+	struct adm1021_data *data = adm1021_update_device(dev);		\
+	return sprintf(buf, "%d\n", data->value);			\
+}
+show2(alarms);
+show2(die_code);
+
+#define set(value, reg)	\
+static ssize_t set_##value(struct device *dev, const char *buf, size_t count)	\
+{								\
+	struct i2c_client *client = to_i2c_client(dev);		\
+	struct adm1021_data *data = i2c_get_clientdata(client);	\
+	int temp = simple_strtoul(buf, NULL, 10);		\
+								\
+	down(&data->update_lock);				\
+	data->value = TEMP_TO_REG(temp);			\
+	adm1021_write_value(client, reg, data->value);		\
+	up(&data->update_lock);					\
+	return count;						\
+}
+set(temp_max, ADM1021_REG_TOS_W);
+set(temp_hyst, ADM1021_REG_THYST_W);
+set(remote_temp_max, ADM1021_REG_REMOTE_TOS_W);
+set(remote_temp_hyst, ADM1021_REG_REMOTE_THYST_W);
+
+static DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO, show_temp_max, set_temp_max);
+static DEVICE_ATTR(temp1_min, S_IWUSR | S_IRUGO, show_temp_hyst, set_temp_hyst);
+static DEVICE_ATTR(temp1_input, S_IRUGO, show_temp_input, NULL);
+static DEVICE_ATTR(temp2_max, S_IWUSR | S_IRUGO, show_remote_temp_max, set_remote_temp_max);
+static DEVICE_ATTR(temp2_min, S_IWUSR | S_IRUGO, show_remote_temp_hyst, set_remote_temp_hyst);
+static DEVICE_ATTR(temp2_input, S_IRUGO, show_remote_temp_input, NULL);
+static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL);
+static DEVICE_ATTR(die_code, S_IRUGO, show_die_code, NULL);
+
+
+static int adm1021_attach_adapter(struct i2c_adapter *adapter)
+{
+	if (!(adapter->class & I2C_CLASS_HWMON))
+		return 0;
+	return i2c_detect(adapter, &addr_data, adm1021_detect);
+}
+
+static int adm1021_detect(struct i2c_adapter *adapter, int address, int kind)
+{
+	int i;
+	struct i2c_client *new_client;
+	struct adm1021_data *data;
+	int err = 0;
+	const char *type_name = "";
+
+	/* Make sure we aren't probing the ISA bus!! This is just a safety check
+	   at this moment; i2c_detect really won't call us. */
+#ifdef DEBUG
+	if (i2c_is_isa_adapter(adapter)) {
+		dev_dbg(&adapter->dev, "adm1021_detect called for an ISA bus adapter?!?\n");
+		return 0;
+	}
+#endif
+
+	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
+		goto error0;
+
+	/* OK. For now, we presume we have a valid client. We now create the
+	   client structure, even though we cannot fill it completely yet.
+	   But it allows us to access adm1021_{read,write}_value. */
+
+	if (!(data = kmalloc(sizeof(struct adm1021_data), GFP_KERNEL))) {
+		err = -ENOMEM;
+		goto error0;
+	}
+	memset(data, 0, sizeof(struct adm1021_data));
+
+	new_client = &data->client;
+	i2c_set_clientdata(new_client, data);
+	new_client->addr = address;
+	new_client->adapter = adapter;
+	new_client->driver = &adm1021_driver;
+	new_client->flags = 0;
+
+	/* Now, we do the remaining detection. */
+	if (kind < 0) {
+		if ((adm1021_read_value(new_client, ADM1021_REG_STATUS) & 0x03) != 0x00
+		 || (adm1021_read_value(new_client, ADM1021_REG_CONFIG_R) & 0x3F) != 0x00
+		 || (adm1021_read_value(new_client, ADM1021_REG_CONV_RATE_R) & 0xF8) != 0x00) {
+			err = -ENODEV;
+			goto error1;
+		}
+	}
+
+	/* Determine the chip type. */
+	if (kind <= 0) {
+		i = adm1021_read_value(new_client, ADM1021_REG_MAN_ID);
+		if (i == 0x41)
+			if ((adm1021_read_value(new_client, ADM1021_REG_DEV_ID) & 0x0F0) == 0x030)
+				kind = adm1023;
+			else
+				kind = adm1021;
+		else if (i == 0x49)
+			kind = thmc10;
+		else if (i == 0x23)
+			kind = gl523sm;
+		else if ((i == 0x4d) &&
+			 (adm1021_read_value(new_client, ADM1021_REG_DEV_ID) == 0x01))
+			kind = max1617a;
+		else if (i == 0x54)
+			kind = mc1066;
+		/* LM84 Mfr ID in a different place, and it has more unused bits */
+		else if (adm1021_read_value(new_client, ADM1021_REG_CONV_RATE_R) == 0x00
+		      && (kind == 0 /* skip extra detection */
+		       || ((adm1021_read_value(new_client, ADM1021_REG_CONFIG_R) & 0x7F) == 0x00
+			&& (adm1021_read_value(new_client, ADM1021_REG_STATUS) & 0xAB) == 0x00)))
+			kind = lm84;
+		else
+			kind = max1617;
+	}
+
+	if (kind == max1617) {
+		type_name = "max1617";
+	} else if (kind == max1617a) {
+		type_name = "max1617a";
+	} else if (kind == adm1021) {
+		type_name = "adm1021";
+	} else if (kind == adm1023) {
+		type_name = "adm1023";
+	} else if (kind == thmc10) {
+		type_name = "thmc10";
+	} else if (kind == lm84) {
+		type_name = "lm84";
+	} else if (kind == gl523sm) {
+		type_name = "gl523sm";
+	} else if (kind == mc1066) {
+		type_name = "mc1066";
+	}
+
+	/* Fill in the remaining client fields and put it into the global list */
+	strlcpy(new_client->name, type_name, I2C_NAME_SIZE);
+	data->type = kind;
+	data->valid = 0;
+	init_MUTEX(&data->update_lock);
+
+	/* Tell the I2C layer a new client has arrived */
+	if ((err = i2c_attach_client(new_client)))
+		goto error1;
+
+	/* Initialize the ADM1021 chip */
+	if (kind != lm84)
+		adm1021_init_client(new_client);
+
+	/* Register sysfs hooks */
+	device_create_file(&new_client->dev, &dev_attr_temp1_max);
+	device_create_file(&new_client->dev, &dev_attr_temp1_min);
+	device_create_file(&new_client->dev, &dev_attr_temp1_input);
+	device_create_file(&new_client->dev, &dev_attr_temp2_max);
+	device_create_file(&new_client->dev, &dev_attr_temp2_min);
+	device_create_file(&new_client->dev, &dev_attr_temp2_input);
+	device_create_file(&new_client->dev, &dev_attr_alarms);
+	if (data->type == adm1021)
+		device_create_file(&new_client->dev, &dev_attr_die_code);
+
+	return 0;
+
+error1:
+	kfree(data);
+error0:
+	return err;
+}
+
+static void adm1021_init_client(struct i2c_client *client)
+{
+	/* Enable ADC and disable suspend mode */
+	adm1021_write_value(client, ADM1021_REG_CONFIG_W,
+		adm1021_read_value(client, ADM1021_REG_CONFIG_R) & 0xBF);
+	/* Set Conversion rate to 1/sec (this can be tinkered with) */
+	adm1021_write_value(client, ADM1021_REG_CONV_RATE_W, 0x04);
+}
+
+static int adm1021_detach_client(struct i2c_client *client)
+{
+	int err;
+
+	if ((err = i2c_detach_client(client))) {
+		dev_err(&client->dev, "Client deregistration failed, client not detached.\n");
+		return err;
+	}
+
+	kfree(i2c_get_clientdata(client));
+	return 0;
+}
+
+/* All registers are byte-sized */
+static int adm1021_read_value(struct i2c_client *client, u8 reg)
+{
+	return i2c_smbus_read_byte_data(client, reg);
+}
+
+static int adm1021_write_value(struct i2c_client *client, u8 reg, u16 value)
+{
+	if (!read_only)
+		return i2c_smbus_write_byte_data(client, reg, value);
+	return 0;
+}
+
+static struct adm1021_data *adm1021_update_device(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct adm1021_data *data = i2c_get_clientdata(client);
+
+	down(&data->update_lock);
+
+	if (time_after(jiffies, data->last_updated + HZ + HZ / 2)
+	    || !data->valid) {
+		dev_dbg(&client->dev, "Starting adm1021 update\n");
+
+		data->temp_input = adm1021_read_value(client, ADM1021_REG_TEMP);
+		data->temp_max = adm1021_read_value(client, ADM1021_REG_TOS_R);
+		data->temp_hyst = adm1021_read_value(client, ADM1021_REG_THYST_R);
+		data->remote_temp_input = adm1021_read_value(client, ADM1021_REG_REMOTE_TEMP);
+		data->remote_temp_max = adm1021_read_value(client, ADM1021_REG_REMOTE_TOS_R);
+		data->remote_temp_hyst = adm1021_read_value(client, ADM1021_REG_REMOTE_THYST_R);
+		data->alarms = adm1021_read_value(client, ADM1021_REG_STATUS) & 0x7c;
+		if (data->type == adm1021)
+			data->die_code = adm1021_read_value(client, ADM1021_REG_DIE_CODE);
+		if (data->type == adm1023) {
+			data->remote_temp_prec = adm1021_read_value(client, ADM1021_REG_REM_TEMP_PREC);
+			data->remote_temp_os_prec = adm1021_read_value(client, ADM1021_REG_REM_TOS_PREC);
+			data->remote_temp_hyst_prec = adm1021_read_value(client, ADM1021_REG_REM_THYST_PREC);
+			data->remote_temp_offset = adm1021_read_value(client, ADM1021_REG_REM_OFFSET);
+			data->remote_temp_offset_prec = adm1021_read_value(client, ADM1021_REG_REM_OFFSET_PREC);
+		}
+		data->last_updated = jiffies;
+		data->valid = 1;
+	}
+
+	up(&data->update_lock);
+
+	return data;
+}
+
+static int __init sensors_adm1021_init(void)
+{
+	return i2c_add_driver(&adm1021_driver);
+}
+
+static void __exit sensors_adm1021_exit(void)
+{
+	i2c_del_driver(&adm1021_driver);
+}
+
+MODULE_AUTHOR ("Frodo Looijaard <frodol@dds.nl> and "
+		"Philip Edelbrock <phil@netroedge.com>");
+MODULE_DESCRIPTION("adm1021 driver");
+MODULE_LICENSE("GPL");
+
+module_param(read_only, bool, 0);
+MODULE_PARM_DESC(read_only, "Don't set any values, read only mode");
+
+module_init(sensors_adm1021_init)
+module_exit(sensors_adm1021_exit)
diff --git a/drivers/i2c/chips/adm1025.c b/drivers/i2c/chips/adm1025.c
new file mode 100644
index 00000000000..e0771a3d05c
--- /dev/null
+++ b/drivers/i2c/chips/adm1025.c
@@ -0,0 +1,574 @@
+/*
+ * adm1025.c
+ *
+ * Copyright (C) 2000       Chen-Yuan Wu <gwu@esoft.com>
+ * Copyright (C) 2003-2004  Jean Delvare <khali@linux-fr.org>
+ *
+ * The ADM1025 is a sensor chip made by Analog Devices. It reports up to 6
+ * voltages (including its own power source) and up to two temperatures
+ * (its own plus up to one external one). Voltages are scaled internally
+ * (which is not the common way) with ratios such that the nominal value
+ * of each voltage correspond to a register value of 192 (which means a
+ * resolution of about 0.5% of the nominal value). Temperature values are
+ * reported with a 1 deg resolution and a 3 deg accuracy. Complete
+ * datasheet can be obtained from Analog's website at:
+ *   http://www.analog.com/Analog_Root/productPage/productHome/0,2121,ADM1025,00.html
+ *
+ * This driver also supports the ADM1025A, which differs from the ADM1025
+ * only in that it has "open-drain VID inputs while the ADM1025 has
+ * on-chip 100k pull-ups on the VID inputs". It doesn't make any
+ * difference for us.
+ *
+ * This driver also supports the NE1619, a sensor chip made by Philips.
+ * That chip is similar to the ADM1025A, with a few differences. The only
+ * difference that matters to us is that the NE1619 has only two possible
+ * addresses while the ADM1025A has a third one. Complete datasheet can be
+ * obtained from Philips's website at:
+ *   http://www.semiconductors.philips.com/pip/NE1619DS.html
+ *
+ * Since the ADM1025 was the first chipset supported by this driver, most
+ * comments will refer to this chipset, but are actually general and
+ * concern all supported chipsets, unless mentioned otherwise.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/jiffies.h>
+#include <linux/i2c.h>
+#include <linux/i2c-sensor.h>
+#include <linux/i2c-vid.h>
+
+/*
+ * Addresses to scan
+ * ADM1025 and ADM1025A have three possible addresses: 0x2c, 0x2d and 0x2e.
+ * NE1619 has two possible addresses: 0x2c and 0x2d.
+ */
+
+static unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, I2C_CLIENT_END };
+static unsigned int normal_isa[] = { I2C_CLIENT_ISA_END };
+
+/*
+ * Insmod parameters
+ */
+
+SENSORS_INSMOD_2(adm1025, ne1619);
+
+/*
+ * The ADM1025 registers
+ */
+
+#define ADM1025_REG_MAN_ID		0x3E
+#define ADM1025_REG_CHIP_ID 		0x3F
+#define ADM1025_REG_CONFIG		0x40
+#define ADM1025_REG_STATUS1		0x41
+#define ADM1025_REG_STATUS2		0x42
+#define ADM1025_REG_IN(nr)		(0x20 + (nr))
+#define ADM1025_REG_IN_MAX(nr)		(0x2B + (nr) * 2)
+#define ADM1025_REG_IN_MIN(nr)		(0x2C + (nr) * 2)
+#define ADM1025_REG_TEMP(nr)		(0x26 + (nr))
+#define ADM1025_REG_TEMP_HIGH(nr)	(0x37 + (nr) * 2)
+#define ADM1025_REG_TEMP_LOW(nr)	(0x38 + (nr) * 2)
+#define ADM1025_REG_VID			0x47
+#define ADM1025_REG_VID4		0x49
+
+/*
+ * Conversions and various macros
+ * The ADM1025 uses signed 8-bit values for temperatures.
+ */
+
+static int in_scale[6] = { 2500, 2250, 3300, 5000, 12000, 3300 };
+
+#define IN_FROM_REG(reg,scale)	(((reg) * (scale) + 96) / 192)
+#define IN_TO_REG(val,scale)	((val) <= 0 ? 0 : \
+				 (val) * 192 >= (scale) * 255 ? 255 : \
+				 ((val) * 192 + (scale)/2) / (scale))
+
+#define TEMP_FROM_REG(reg)	((reg) * 1000)
+#define TEMP_TO_REG(val)	((val) <= -127500 ? -128 : \
+				 (val) >= 126500 ? 127 : \
+				 (((val) < 0 ? (val)-500 : (val)+500) / 1000))
+
+/*
+ * Functions declaration
+ */
+
+static int adm1025_attach_adapter(struct i2c_adapter *adapter);
+static int adm1025_detect(struct i2c_adapter *adapter, int address, int kind);
+static void adm1025_init_client(struct i2c_client *client);
+static int adm1025_detach_client(struct i2c_client *client);
+static struct adm1025_data *adm1025_update_device(struct device *dev);
+
+/*
+ * Driver data (common to all clients)
+ */
+
+static struct i2c_driver adm1025_driver = {
+	.owner		= THIS_MODULE,
+	.name		= "adm1025",
+	.id		= I2C_DRIVERID_ADM1025,
+	.flags		= I2C_DF_NOTIFY,
+	.attach_adapter	= adm1025_attach_adapter,
+	.detach_client	= adm1025_detach_client,
+};
+
+/*
+ * Client data (each client gets its own)
+ */
+
+struct adm1025_data {
+	struct i2c_client client;
+	struct semaphore update_lock;
+	char valid; /* zero until following fields are valid */
+	unsigned long last_updated; /* in jiffies */
+
+	u8 in[6];		/* register value */
+	u8 in_max[6];		/* register value */
+	u8 in_min[6];		/* register value */
+	s8 temp[2];		/* register value */
+	s8 temp_min[2];		/* register value */
+	s8 temp_max[2];		/* register value */
+	u16 alarms;		/* register values, combined */
+	u8 vid;			/* register values, combined */
+	u8 vrm;
+};
+
+/*
+ * Sysfs stuff
+ */
+
+#define show_in(offset) \
+static ssize_t show_in##offset(struct device *dev, char *buf) \
+{ \
+	struct adm1025_data *data = adm1025_update_device(dev); \
+	return sprintf(buf, "%u\n", IN_FROM_REG(data->in[offset], \
+		       in_scale[offset])); \
+} \
+static ssize_t show_in##offset##_min(struct device *dev, char *buf) \
+{ \
+	struct adm1025_data *data = adm1025_update_device(dev); \
+	return sprintf(buf, "%u\n", IN_FROM_REG(data->in_min[offset], \
+		       in_scale[offset])); \
+} \
+static ssize_t show_in##offset##_max(struct device *dev, char *buf) \
+{ \
+	struct adm1025_data *data = adm1025_update_device(dev); \
+	return sprintf(buf, "%u\n", IN_FROM_REG(data->in_max[offset], \
+		       in_scale[offset])); \
+} \
+static DEVICE_ATTR(in##offset##_input, S_IRUGO, show_in##offset, NULL);
+show_in(0);
+show_in(1);
+show_in(2);
+show_in(3);
+show_in(4);
+show_in(5);
+
+#define show_temp(offset) \
+static ssize_t show_temp##offset(struct device *dev, char *buf) \
+{ \
+	struct adm1025_data *data = adm1025_update_device(dev); \
+	return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp[offset-1])); \
+} \
+static ssize_t show_temp##offset##_min(struct device *dev, char *buf) \
+{ \
+	struct adm1025_data *data = adm1025_update_device(dev); \
+	return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_min[offset-1])); \
+} \
+static ssize_t show_temp##offset##_max(struct device *dev, char *buf) \
+{ \
+	struct adm1025_data *data = adm1025_update_device(dev); \
+	return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_max[offset-1])); \
+}\
+static DEVICE_ATTR(temp##offset##_input, S_IRUGO, show_temp##offset, NULL);
+show_temp(1);
+show_temp(2);
+
+#define set_in(offset) \
+static ssize_t set_in##offset##_min(struct device *dev, const char *buf, \
+	size_t count) \
+{ \
+	struct i2c_client *client = to_i2c_client(dev); \
+	struct adm1025_data *data = i2c_get_clientdata(client); \
+	long val = simple_strtol(buf, NULL, 10); \
+ \
+	down(&data->update_lock); \
+	data->in_min[offset] = IN_TO_REG(val, in_scale[offset]); \
+	i2c_smbus_write_byte_data(client, ADM1025_REG_IN_MIN(offset), \
+				  data->in_min[offset]); \
+	up(&data->update_lock); \
+	return count; \
+} \
+static ssize_t set_in##offset##_max(struct device *dev, const char *buf, \
+	size_t count) \
+{ \
+	struct i2c_client *client = to_i2c_client(dev); \
+	struct adm1025_data *data = i2c_get_clientdata(client); \
+	long val = simple_strtol(buf, NULL, 10); \
+ \
+	down(&data->update_lock); \
+	data->in_max[offset] = IN_TO_REG(val, in_scale[offset]); \
+	i2c_smbus_write_byte_data(client, ADM1025_REG_IN_MAX(offset), \
+				  data->in_max[offset]); \
+	up(&data->update_lock); \
+	return count; \
+} \
+static DEVICE_ATTR(in##offset##_min, S_IWUSR | S_IRUGO, \
+	show_in##offset##_min, set_in##offset##_min); \
+static DEVICE_ATTR(in##offset##_max, S_IWUSR | S_IRUGO, \
+	show_in##offset##_max, set_in##offset##_max);
+set_in(0);
+set_in(1);
+set_in(2);
+set_in(3);
+set_in(4);
+set_in(5);
+
+#define set_temp(offset) \
+static ssize_t set_temp##offset##_min(struct device *dev, const char *buf, \
+	size_t count) \
+{ \
+	struct i2c_client *client = to_i2c_client(dev); \
+	struct adm1025_data *data = i2c_get_clientdata(client); \
+	long val = simple_strtol(buf, NULL, 10); \
+ \
+	down(&data->update_lock); \
+	data->temp_min[offset-1] = TEMP_TO_REG(val); \
+	i2c_smbus_write_byte_data(client, ADM1025_REG_TEMP_LOW(offset-1), \
+				  data->temp_min[offset-1]); \
+	up(&data->update_lock); \
+	return count; \
+} \
+static ssize_t set_temp##offset##_max(struct device *dev, const char *buf, \
+	size_t count) \
+{ \
+	struct i2c_client *client = to_i2c_client(dev); \
+	struct adm1025_data *data = i2c_get_clientdata(client); \
+	long val = simple_strtol(buf, NULL, 10); \
+ \
+	down(&data->update_lock); \
+	data->temp_max[offset-1] = TEMP_TO_REG(val); \
+	i2c_smbus_write_byte_data(client, ADM1025_REG_TEMP_HIGH(offset-1), \
+				  data->temp_max[offset-1]); \
+	up(&data->update_lock); \
+	return count; \
+} \
+static DEVICE_ATTR(temp##offset##_min, S_IWUSR | S_IRUGO, \
+	show_temp##offset##_min, set_temp##offset##_min); \
+static DEVICE_ATTR(temp##offset##_max, S_IWUSR | S_IRUGO, \
+	show_temp##offset##_max, set_temp##offset##_max);
+set_temp(1);
+set_temp(2);
+
+static ssize_t show_alarms(struct device *dev, char *buf)
+{
+	struct adm1025_data *data = adm1025_update_device(dev);
+	return sprintf(buf, "%u\n", data->alarms);
+}
+static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL);
+
+static ssize_t show_vid(struct device *dev, char *buf)
+{
+	struct adm1025_data *data = adm1025_update_device(dev);
+	return sprintf(buf, "%u\n", vid_from_reg(data->vid, data->vrm));
+}
+static DEVICE_ATTR(in1_ref, S_IRUGO, show_vid, NULL);
+
+static ssize_t show_vrm(struct device *dev, char *buf)
+{
+	struct adm1025_data *data = adm1025_update_device(dev);
+	return sprintf(buf, "%u\n", data->vrm);
+}
+static ssize_t set_vrm(struct device *dev, const char *buf, size_t count)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct adm1025_data *data = i2c_get_clientdata(client);
+	data->vrm = simple_strtoul(buf, NULL, 10);
+	return count;
+}
+static DEVICE_ATTR(vrm, S_IRUGO | S_IWUSR, show_vrm, set_vrm);
+
+/*
+ * Real code
+ */
+
+static int adm1025_attach_adapter(struct i2c_adapter *adapter)
+{
+	if (!(adapter->class & I2C_CLASS_HWMON))
+		return 0;
+	return i2c_detect(adapter, &addr_data, adm1025_detect);
+}
+
+/*
+ * The following function does more than just detection. If detection
+ * succeeds, it also registers the new chip.
+ */
+static int adm1025_detect(struct i2c_adapter *adapter, int address, int kind)
+{
+	struct i2c_client *new_client;
+	struct adm1025_data *data;
+	int err = 0;
+	const char *name = "";
+	u8 config;
+
+	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
+		goto exit;
+
+	if (!(data = kmalloc(sizeof(struct adm1025_data), GFP_KERNEL))) {
+		err = -ENOMEM;
+		goto exit;
+	}
+	memset(data, 0, sizeof(struct adm1025_data));
+
+	/* The common I2C client data is placed right before the
+	   ADM1025-specific data. */
+	new_client = &data->client;
+	i2c_set_clientdata(new_client, data);
+	new_client->addr = address;
+	new_client->adapter = adapter;
+	new_client->driver = &adm1025_driver;
+	new_client->flags = 0;
+
+	/*
+	 * Now we do the remaining detection. A negative kind means that
+	 * the driver was loaded with no force parameter (default), so we
+	 * must both detect and identify the chip. A zero kind means that
+	 * the driver was loaded with the force parameter, the detection
+	 * step shall be skipped. A positive kind means that the driver
+	 * was loaded with the force parameter and a given kind of chip is
+	 * requested, so both the detection and the identification steps
+	 * are skipped.
+	 */
+	config = i2c_smbus_read_byte_data(new_client, ADM1025_REG_CONFIG);
+	if (kind < 0) { /* detection */
+		if ((config & 0x80) != 0x00
+		 || (i2c_smbus_read_byte_data(new_client,
+		     ADM1025_REG_STATUS1) & 0xC0) != 0x00
+		 || (i2c_smbus_read_byte_data(new_client,
+		     ADM1025_REG_STATUS2) & 0xBC) != 0x00) {
+			dev_dbg(&adapter->dev,
+				"ADM1025 detection failed at 0x%02x.\n",
+				address);
+			goto exit_free;
+		}
+	}
+
+	if (kind <= 0) { /* identification */
+		u8 man_id, chip_id;
+
+		man_id = i2c_smbus_read_byte_data(new_client,
+			 ADM1025_REG_MAN_ID);
+		chip_id = i2c_smbus_read_byte_data(new_client,
+			  ADM1025_REG_CHIP_ID);
+		
+		if (man_id == 0x41) { /* Analog Devices */
+			if ((chip_id & 0xF0) == 0x20) { /* ADM1025/ADM1025A */
+				kind = adm1025;
+			}
+		} else
+		if (man_id == 0xA1) { /* Philips */
+			if (address != 0x2E
+			 && (chip_id & 0xF0) == 0x20) { /* NE1619 */
+				kind = ne1619;
+			}
+		}
+
+		if (kind <= 0) { /* identification failed */
+			dev_info(&adapter->dev,
+			    "Unsupported chip (man_id=0x%02X, "
+			    "chip_id=0x%02X).\n", man_id, chip_id);
+			goto exit_free;
+		}
+	}
+
+	if (kind == adm1025) {
+		name = "adm1025";
+	} else if (kind == ne1619) {
+		name = "ne1619";
+	}
+
+	/* We can fill in the remaining client fields */
+	strlcpy(new_client->name, name, I2C_NAME_SIZE);
+	data->valid = 0;
+	init_MUTEX(&data->update_lock);
+
+	/* Tell the I2C layer a new client has arrived */
+	if ((err = i2c_attach_client(new_client)))
+		goto exit_free;
+
+	/* Initialize the ADM1025 chip */
+	adm1025_init_client(new_client);
+
+	/* Register sysfs hooks */
+	device_create_file(&new_client->dev, &dev_attr_in0_input);
+	device_create_file(&new_client->dev, &dev_attr_in1_input);
+	device_create_file(&new_client->dev, &dev_attr_in2_input);
+	device_create_file(&new_client->dev, &dev_attr_in3_input);
+	device_create_file(&new_client->dev, &dev_attr_in5_input);
+	device_create_file(&new_client->dev, &dev_attr_in0_min);
+	device_create_file(&new_client->dev, &dev_attr_in1_min);
+	device_create_file(&new_client->dev, &dev_attr_in2_min);
+	device_create_file(&new_client->dev, &dev_attr_in3_min);
+	device_create_file(&new_client->dev, &dev_attr_in5_min);
+	device_create_file(&new_client->dev, &dev_attr_in0_max);
+	device_create_file(&new_client->dev, &dev_attr_in1_max);
+	device_create_file(&new_client->dev, &dev_attr_in2_max);
+	device_create_file(&new_client->dev, &dev_attr_in3_max);
+	device_create_file(&new_client->dev, &dev_attr_in5_max);
+	device_create_file(&new_client->dev, &dev_attr_temp1_input);
+	device_create_file(&new_client->dev, &dev_attr_temp2_input);
+	device_create_file(&new_client->dev, &dev_attr_temp1_min);
+	device_create_file(&new_client->dev, &dev_attr_temp2_min);
+	device_create_file(&new_client->dev, &dev_attr_temp1_max);
+	device_create_file(&new_client->dev, &dev_attr_temp2_max);
+	device_create_file(&new_client->dev, &dev_attr_alarms);
+	device_create_file(&new_client->dev, &dev_attr_in1_ref);
+	device_create_file(&new_client->dev, &dev_attr_vrm);
+
+	/* Pin 11 is either in4 (+12V) or VID4 */
+	if (!(config & 0x20)) {
+		device_create_file(&new_client->dev, &dev_attr_in4_input);
+		device_create_file(&new_client->dev, &dev_attr_in4_min);
+		device_create_file(&new_client->dev, &dev_attr_in4_max);
+	}
+
+	return 0;
+
+exit_free:
+	kfree(data);
+exit:
+	return err;
+}
+
+static void adm1025_init_client(struct i2c_client *client)
+{
+	u8 reg;
+	struct adm1025_data *data = i2c_get_clientdata(client);
+	int i;
+
+	data->vrm = i2c_which_vrm();
+
+	/*
+	 * Set high limits
+	 * Usually we avoid setting limits on driver init, but it happens
+	 * that the ADM1025 comes with stupid default limits (all registers
+	 * set to 0). In case the chip has not gone through any limit
+	 * setting yet, we better set the high limits to the max so that
+	 * no alarm triggers.
+	 */
+	for (i=0; i<6; i++) {
+		reg = i2c_smbus_read_byte_data(client,
+					       ADM1025_REG_IN_MAX(i));
+		if (reg == 0)
+			i2c_smbus_write_byte_data(client,
+						  ADM1025_REG_IN_MAX(i),
+						  0xFF);
+	}
+	for (i=0; i<2; i++) {
+		reg = i2c_smbus_read_byte_data(client,
+					       ADM1025_REG_TEMP_HIGH(i));
+		if (reg == 0)
+			i2c_smbus_write_byte_data(client,
+						  ADM1025_REG_TEMP_HIGH(i),
+						  0x7F);
+	}
+
+	/*
+	 * Start the conversions
+	 */
+	reg = i2c_smbus_read_byte_data(client, ADM1025_REG_CONFIG);
+	if (!(reg & 0x01))
+		i2c_smbus_write_byte_data(client, ADM1025_REG_CONFIG,
+					  (reg&0x7E)|0x01);
+}
+
+static int adm1025_detach_client(struct i2c_client *client)
+{
+	int err;
+
+	if ((err = i2c_detach_client(client))) {
+		dev_err(&client->dev, "Client deregistration failed, "
+			"client not detached.\n");
+		return err;
+	}
+
+	kfree(i2c_get_clientdata(client));
+	return 0;
+}
+
+static struct adm1025_data *adm1025_update_device(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct adm1025_data *data = i2c_get_clientdata(client);
+
+	down(&data->update_lock);
+
+	if (time_after(jiffies, data->last_updated + HZ * 2) || !data->valid) {
+		int i;
+
+		dev_dbg(&client->dev, "Updating data.\n");
+		for (i=0; i<6; i++) {
+			data->in[i] = i2c_smbus_read_byte_data(client,
+				      ADM1025_REG_IN(i));
+			data->in_min[i] = i2c_smbus_read_byte_data(client,
+					  ADM1025_REG_IN_MIN(i));
+			data->in_max[i] = i2c_smbus_read_byte_data(client,
+					  ADM1025_REG_IN_MAX(i));
+		}
+		for (i=0; i<2; i++) {
+			data->temp[i] = i2c_smbus_read_byte_data(client,
+					ADM1025_REG_TEMP(i));
+			data->temp_min[i] = i2c_smbus_read_byte_data(client,
+					    ADM1025_REG_TEMP_LOW(i));
+			data->temp_max[i] = i2c_smbus_read_byte_data(client,
+					    ADM1025_REG_TEMP_HIGH(i));
+		}
+		data->alarms = i2c_smbus_read_byte_data(client,
+			       ADM1025_REG_STATUS1)
+			     | (i2c_smbus_read_byte_data(client,
+				ADM1025_REG_STATUS2) << 8);
+		data->vid = (i2c_smbus_read_byte_data(client,
+			     ADM1025_REG_VID) & 0x0f)
+			  | ((i2c_smbus_read_byte_data(client,
+			      ADM1025_REG_VID4) & 0x01) << 4);
+
+		data->last_updated = jiffies;
+		data->valid = 1;
+	}
+
+	up(&data->update_lock);
+
+	return data;
+}
+
+static int __init sensors_adm1025_init(void)
+{
+	return i2c_add_driver(&adm1025_driver);
+}
+
+static void __exit sensors_adm1025_exit(void)
+{
+	i2c_del_driver(&adm1025_driver);
+}
+
+MODULE_AUTHOR("Jean Delvare <khali@linux-fr.org>");
+MODULE_DESCRIPTION("ADM1025 driver");
+MODULE_LICENSE("GPL");
+
+module_init(sensors_adm1025_init);
+module_exit(sensors_adm1025_exit);
diff --git a/drivers/i2c/chips/adm1026.c b/drivers/i2c/chips/adm1026.c
new file mode 100644
index 00000000000..39e2f4a900b
--- /dev/null
+++ b/drivers/i2c/chips/adm1026.c
@@ -0,0 +1,1754 @@
+/*
+    adm1026.c - Part of lm_sensors, Linux kernel modules for hardware
+	     monitoring
+    Copyright (C) 2002, 2003  Philip Pokorny <ppokorny@penguincomputing.com>
+    Copyright (C) 2004 Justin Thiessen <jthiessen@penguincomputing.com>
+
+    Chip details at:
+
+    <http://www.analog.com/UploadedFiles/Data_Sheets/779263102ADM1026_a.pdf>
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/jiffies.h>
+#include <linux/i2c.h>
+#include <linux/i2c-sensor.h>
+#include <linux/i2c-vid.h>
+
+/* Addresses to scan */
+static unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, I2C_CLIENT_END };
+static unsigned int normal_isa[] = { I2C_CLIENT_ISA_END };
+
+/* Insmod parameters */
+SENSORS_INSMOD_1(adm1026);
+
+static int gpio_input[17]  = { -1, -1, -1, -1, -1, -1, -1, -1, -1,
+				-1, -1, -1, -1, -1, -1, -1, -1 }; 
+static int gpio_output[17] = { -1, -1, -1, -1, -1, -1, -1, -1, -1,
+				-1, -1, -1, -1, -1, -1, -1, -1 };
+static int gpio_inverted[17] = { -1, -1, -1, -1, -1, -1, -1, -1, -1,
+				-1, -1, -1, -1, -1, -1, -1, -1 };
+static int gpio_normal[17] = { -1, -1, -1, -1, -1, -1, -1, -1, -1,
+				-1, -1, -1, -1, -1, -1, -1, -1 };
+static int gpio_fan[8] = { -1, -1, -1, -1, -1, -1, -1, -1 };
+module_param_array(gpio_input,int,NULL,0);
+MODULE_PARM_DESC(gpio_input,"List of GPIO pins (0-16) to program as inputs");
+module_param_array(gpio_output,int,NULL,0);
+MODULE_PARM_DESC(gpio_output,"List of GPIO pins (0-16) to program as "
+	"outputs");
+module_param_array(gpio_inverted,int,NULL,0);
+MODULE_PARM_DESC(gpio_inverted,"List of GPIO pins (0-16) to program as "
+	"inverted");
+module_param_array(gpio_normal,int,NULL,0);
+MODULE_PARM_DESC(gpio_normal,"List of GPIO pins (0-16) to program as "
+	"normal/non-inverted");
+module_param_array(gpio_fan,int,NULL,0);
+MODULE_PARM_DESC(gpio_fan,"List of GPIO pins (0-7) to program as fan tachs");
+
+/* Many ADM1026 constants specified below */
+
+/* The ADM1026 registers */
+#define ADM1026_REG_CONFIG1  0x00
+#define CFG1_MONITOR     0x01
+#define CFG1_INT_ENABLE  0x02
+#define CFG1_INT_CLEAR   0x04
+#define CFG1_AIN8_9      0x08
+#define CFG1_THERM_HOT   0x10
+#define CFG1_DAC_AFC     0x20
+#define CFG1_PWM_AFC     0x40
+#define CFG1_RESET       0x80
+#define ADM1026_REG_CONFIG2  0x01
+/* CONFIG2 controls FAN0/GPIO0 through FAN7/GPIO7 */
+#define ADM1026_REG_CONFIG3  0x07
+#define CFG3_GPIO16_ENABLE  0x01
+#define CFG3_CI_CLEAR  0x02
+#define CFG3_VREF_250  0x04
+#define CFG3_GPIO16_DIR  0x40
+#define CFG3_GPIO16_POL  0x80
+#define ADM1026_REG_E2CONFIG  0x13
+#define E2CFG_READ  0x01
+#define E2CFG_WRITE  0x02
+#define E2CFG_ERASE  0x04
+#define E2CFG_ROM  0x08
+#define E2CFG_CLK_EXT  0x80
+
+/* There are 10 general analog inputs and 7 dedicated inputs
+ * They are:
+ *    0 - 9  =  AIN0 - AIN9
+ *       10  =  Vbat
+ *       11  =  3.3V Standby
+ *       12  =  3.3V Main
+ *       13  =  +5V
+ *       14  =  Vccp (CPU core voltage)
+ *       15  =  +12V
+ *       16  =  -12V
+ */
+static u16 ADM1026_REG_IN[] = {
+		0x30, 0x31, 0x32, 0x33, 0x34, 0x35,
+		0x36, 0x37, 0x27, 0x29, 0x26, 0x2a,
+		0x2b, 0x2c, 0x2d, 0x2e, 0x2f
+	};
+static u16 ADM1026_REG_IN_MIN[] = {
+		0x58, 0x59, 0x5a, 0x5b, 0x5c, 0x5d,
+		0x5e, 0x5f, 0x6d, 0x49, 0x6b, 0x4a,
+		0x4b, 0x4c, 0x4d, 0x4e, 0x4f
+	};
+static u16 ADM1026_REG_IN_MAX[] = {
+		0x50, 0x51, 0x52, 0x53, 0x54, 0x55,
+		0x56, 0x57, 0x6c, 0x41, 0x6a, 0x42,
+		0x43, 0x44, 0x45, 0x46, 0x47
+	};
+
+/* Temperatures are:
+ *    0 - Internal
+ *    1 - External 1
+ *    2 - External 2
+ */
+static u16 ADM1026_REG_TEMP[] = { 0x1f, 0x28, 0x29 };
+static u16 ADM1026_REG_TEMP_MIN[] = { 0x69, 0x48, 0x49 };
+static u16 ADM1026_REG_TEMP_MAX[] = { 0x68, 0x40, 0x41 };
+static u16 ADM1026_REG_TEMP_TMIN[] = { 0x10, 0x11, 0x12 };
+static u16 ADM1026_REG_TEMP_THERM[] = { 0x0d, 0x0e, 0x0f };
+static u16 ADM1026_REG_TEMP_OFFSET[] = { 0x1e, 0x6e, 0x6f };
+
+#define ADM1026_REG_FAN(nr) (0x38 + (nr))
+#define ADM1026_REG_FAN_MIN(nr) (0x60 + (nr))
+#define ADM1026_REG_FAN_DIV_0_3 0x02
+#define ADM1026_REG_FAN_DIV_4_7 0x03
+
+#define ADM1026_REG_DAC  0x04
+#define ADM1026_REG_PWM  0x05
+
+#define ADM1026_REG_GPIO_CFG_0_3 0x08
+#define ADM1026_REG_GPIO_CFG_4_7 0x09
+#define ADM1026_REG_GPIO_CFG_8_11 0x0a
+#define ADM1026_REG_GPIO_CFG_12_15 0x0b
+/* CFG_16 in REG_CFG3 */
+#define ADM1026_REG_GPIO_STATUS_0_7 0x24
+#define ADM1026_REG_GPIO_STATUS_8_15 0x25
+/* STATUS_16 in REG_STATUS4 */
+#define ADM1026_REG_GPIO_MASK_0_7 0x1c
+#define ADM1026_REG_GPIO_MASK_8_15 0x1d
+/* MASK_16 in REG_MASK4 */
+
+#define ADM1026_REG_COMPANY 0x16
+#define ADM1026_REG_VERSTEP 0x17
+/* These are the recognized values for the above regs */
+#define ADM1026_COMPANY_ANALOG_DEV 0x41
+#define ADM1026_VERSTEP_GENERIC 0x40
+#define ADM1026_VERSTEP_ADM1026 0x44
+
+#define ADM1026_REG_MASK1 0x18
+#define ADM1026_REG_MASK2 0x19
+#define ADM1026_REG_MASK3 0x1a
+#define ADM1026_REG_MASK4 0x1b
+
+#define ADM1026_REG_STATUS1 0x20
+#define ADM1026_REG_STATUS2 0x21
+#define ADM1026_REG_STATUS3 0x22
+#define ADM1026_REG_STATUS4 0x23
+
+#define ADM1026_FAN_ACTIVATION_TEMP_HYST -6
+#define ADM1026_FAN_CONTROL_TEMP_RANGE 20
+#define ADM1026_PWM_MAX 255
+
+/* Conversions. Rounding and limit checking is only done on the TO_REG 
+ * variants. Note that you should be a bit careful with which arguments
+ * these macros are called: arguments may be evaluated more than once.
+ */
+
+/* IN are scaled acording to built-in resistors.  These are the
+ *   voltages corresponding to 3/4 of full scale (192 or 0xc0)
+ *   NOTE: The -12V input needs an additional factor to account
+ *      for the Vref pullup resistor.
+ *      NEG12_OFFSET = SCALE * Vref / V-192 - Vref
+ *                   = 13875 * 2.50 / 1.875 - 2500
+ *                   = 16000
+ *
+ * The values in this table are based on Table II, page 15 of the
+ *    datasheet.
+ */
+static int adm1026_scaling[] = {  /* .001 Volts */
+		2250, 2250, 2250, 2250, 2250, 2250, 
+		1875, 1875, 1875, 1875, 3000, 3330, 
+		3330, 4995, 2250, 12000, 13875
+	};
+#define NEG12_OFFSET  16000
+#define SCALE(val,from,to) (((val)*(to) + ((from)/2))/(from))
+#define INS_TO_REG(n,val)  (SENSORS_LIMIT(SCALE(val,adm1026_scaling[n],192),\
+	0,255))
+#define INS_FROM_REG(n,val) (SCALE(val,192,adm1026_scaling[n]))
+
+/* FAN speed is measured using 22.5kHz clock and counts for 2 pulses
+ *   and we assume a 2 pulse-per-rev fan tach signal
+ *      22500 kHz * 60 (sec/min) * 2 (pulse) / 2 (pulse/rev) == 1350000
+ */
+#define FAN_TO_REG(val,div)  ((val)<=0 ? 0xff : SENSORS_LIMIT(1350000/((val)*\
+	(div)),1,254)) 
+#define FAN_FROM_REG(val,div) ((val)==0?-1:(val)==0xff ? 0 : 1350000/((val)*\
+	(div)))
+#define DIV_FROM_REG(val) (1<<(val))
+#define DIV_TO_REG(val) ((val)>=8 ? 3 : (val)>=4 ? 2 : (val)>=2 ? 1 : 0)
+
+/* Temperature is reported in 1 degC increments */
+#define TEMP_TO_REG(val) (SENSORS_LIMIT(((val)+((val)<0 ? -500 : 500))/1000,\
+	-127,127))
+#define TEMP_FROM_REG(val) ((val) * 1000)
+#define OFFSET_TO_REG(val) (SENSORS_LIMIT(((val)+((val)<0 ? -500 : 500))/1000,\
+	-127,127))
+#define OFFSET_FROM_REG(val) ((val) * 1000)
+
+#define PWM_TO_REG(val) (SENSORS_LIMIT(val,0,255))
+#define PWM_FROM_REG(val) (val)
+
+#define PWM_MIN_TO_REG(val) ((val) & 0xf0)
+#define PWM_MIN_FROM_REG(val) (((val) & 0xf0) + ((val) >> 4))
+
+/* Analog output is a voltage, and scaled to millivolts.  The datasheet 
+ *   indicates that the DAC could be used to drive the fans, but in our 
+ *   example board (Arima HDAMA) it isn't connected to the fans at all.
+ */
+#define DAC_TO_REG(val) (SENSORS_LIMIT(((((val)*255)+500)/2500),0,255)) 
+#define DAC_FROM_REG(val) (((val)*2500)/255)
+
+/* Typically used with systems using a v9.1 VRM spec ? */
+#define ADM1026_INIT_VRM  91
+
+/* Chip sampling rates
+ *
+ * Some sensors are not updated more frequently than once per second
+ *    so it doesn't make sense to read them more often than that.
+ *    We cache the results and return the saved data if the driver
+ *    is called again before a second has elapsed.
+ *
+ * Also, there is significant configuration data for this chip
+ *    So, we keep the config data up to date in the cache
+ *    when it is written and only sample it once every 5 *minutes*
+ */
+#define ADM1026_DATA_INTERVAL  (1 * HZ)
+#define ADM1026_CONFIG_INTERVAL  (5 * 60 * HZ)
+
+/* We allow for multiple chips in a single system.
+ *
+ * For each registered ADM1026, we need to keep state information
+ * at client->data. The adm1026_data structure is dynamically
+ * allocated, when a new client structure is allocated. */
+
+struct pwm_data {
+	u8 pwm;
+	u8 enable;
+	u8 auto_pwm_min;
+};
+
+struct adm1026_data {
+	struct i2c_client client;
+	struct semaphore lock;
+	enum chips type;
+
+	struct semaphore update_lock;
+	int valid;		/* !=0 if following fields are valid */
+	unsigned long last_reading;	/* In jiffies */
+	unsigned long last_config;	/* In jiffies */
+
+	u8 in[17];              /* Register value */
+	u8 in_max[17];          /* Register value */
+	u8 in_min[17];          /* Register value */
+	s8 temp[3];             /* Register value */
+	s8 temp_min[3];         /* Register value */
+	s8 temp_max[3];         /* Register value */
+	s8 temp_tmin[3];        /* Register value */
+	s8 temp_crit[3];        /* Register value */
+	s8 temp_offset[3];      /* Register value */
+	u8 fan[8];              /* Register value */
+	u8 fan_min[8];          /* Register value */
+	u8 fan_div[8];          /* Decoded value */
+	struct pwm_data pwm1;   /* Pwm control values */
+	int vid;                /* Decoded value */
+	u8 vrm;                 /* VRM version */
+	u8 analog_out;		/* Register value (DAC) */
+	long alarms;            /* Register encoding, combined */
+	long alarm_mask;        /* Register encoding, combined */
+	long gpio;              /* Register encoding, combined */
+	long gpio_mask;         /* Register encoding, combined */
+	u8 gpio_config[17];     /* Decoded value */
+	u8 config1;             /* Register value */
+	u8 config2;             /* Register value */
+	u8 config3;             /* Register value */
+};
+
+static int adm1026_attach_adapter(struct i2c_adapter *adapter);
+static int adm1026_detect(struct i2c_adapter *adapter, int address,
+	int kind);
+static int adm1026_detach_client(struct i2c_client *client);
+static int adm1026_read_value(struct i2c_client *client, u8 register);
+static int adm1026_write_value(struct i2c_client *client, u8 register,
+	int value); 
+static void adm1026_print_gpio(struct i2c_client *client);
+static void adm1026_fixup_gpio(struct i2c_client *client); 
+static struct adm1026_data *adm1026_update_device(struct device *dev);
+static void adm1026_init_client(struct i2c_client *client);
+
+
+static struct i2c_driver adm1026_driver = {
+	.owner          = THIS_MODULE,
+	.name           = "adm1026",
+	.flags          = I2C_DF_NOTIFY,
+	.attach_adapter = adm1026_attach_adapter,
+	.detach_client  = adm1026_detach_client,
+};
+
+int adm1026_attach_adapter(struct i2c_adapter *adapter)
+{
+	if (!(adapter->class & I2C_CLASS_HWMON)) {
+		return 0;
+	}
+	return i2c_detect(adapter, &addr_data, adm1026_detect);
+}
+
+int adm1026_detach_client(struct i2c_client *client)
+{
+	i2c_detach_client(client);
+	kfree(client);
+	return 0;
+}
+
+int adm1026_read_value(struct i2c_client *client, u8 reg)
+{
+	int res;
+
+	if (reg < 0x80) {
+		/* "RAM" locations */
+		res = i2c_smbus_read_byte_data(client, reg) & 0xff;
+	} else {
+		/* EEPROM, do nothing */
+		res = 0;
+	}
+	return res;
+}
+
+int adm1026_write_value(struct i2c_client *client, u8 reg, int value)
+{
+	int res;
+
+	if (reg < 0x80) {
+		/* "RAM" locations */
+		res = i2c_smbus_write_byte_data(client, reg, value);
+	} else {
+		/* EEPROM, do nothing */
+		res = 0;
+	}
+	return res;
+}
+
+void adm1026_init_client(struct i2c_client *client)
+{
+	int value, i;
+	struct adm1026_data *data = i2c_get_clientdata(client);
+
+        dev_dbg(&client->dev, "Initializing device\n");
+	/* Read chip config */
+	data->config1 = adm1026_read_value(client, ADM1026_REG_CONFIG1);
+	data->config2 = adm1026_read_value(client, ADM1026_REG_CONFIG2);
+	data->config3 = adm1026_read_value(client, ADM1026_REG_CONFIG3);
+
+	/* Inform user of chip config */
+	dev_dbg(&client->dev, "ADM1026_REG_CONFIG1 is: 0x%02x\n",
+		data->config1);
+	if ((data->config1 & CFG1_MONITOR) == 0) {
+		dev_dbg(&client->dev, "Monitoring not currently "
+			"enabled.\n");
+	}
+	if (data->config1 & CFG1_INT_ENABLE) {
+		dev_dbg(&client->dev, "SMBALERT interrupts are "
+			"enabled.\n");
+	}
+	if (data->config1 & CFG1_AIN8_9) {
+		dev_dbg(&client->dev, "in8 and in9 enabled. "
+			"temp3 disabled.\n");
+	} else {
+		dev_dbg(&client->dev, "temp3 enabled.  in8 and "
+			"in9 disabled.\n");
+	}
+	if (data->config1 & CFG1_THERM_HOT) {
+		dev_dbg(&client->dev, "Automatic THERM, PWM, "
+			"and temp limits enabled.\n");
+	}
+
+	value = data->config3;
+	if (data->config3 & CFG3_GPIO16_ENABLE) {
+		dev_dbg(&client->dev, "GPIO16 enabled.  THERM"
+			"pin disabled.\n");
+	} else {
+		dev_dbg(&client->dev, "THERM pin enabled.  "
+			"GPIO16 disabled.\n");
+	}
+	if (data->config3 & CFG3_VREF_250) {
+		dev_dbg(&client->dev, "Vref is 2.50 Volts.\n");
+	} else {
+		dev_dbg(&client->dev, "Vref is 1.82 Volts.\n");
+	}
+	/* Read and pick apart the existing GPIO configuration */
+	value = 0;
+	for (i = 0;i <= 15;++i) {
+		if ((i & 0x03) == 0) {
+			value = adm1026_read_value(client,
+					ADM1026_REG_GPIO_CFG_0_3 + i/4);
+		}
+		data->gpio_config[i] = value & 0x03;
+		value >>= 2;
+	}
+	data->gpio_config[16] = (data->config3 >> 6) & 0x03;
+
+	/* ... and then print it */
+	adm1026_print_gpio(client);
+
+	/* If the user asks us to reprogram the GPIO config, then
+	 * do it now.
+	 */
+	if (gpio_input[0] != -1 || gpio_output[0] != -1
+		|| gpio_inverted[0] != -1 || gpio_normal[0] != -1
+		|| gpio_fan[0] != -1) {
+		adm1026_fixup_gpio(client);
+	}
+
+	/* WE INTENTIONALLY make no changes to the limits,
+	 *   offsets, pwms, fans and zones.  If they were
+	 *   configured, we don't want to mess with them.
+	 *   If they weren't, the default is 100% PWM, no
+	 *   control and will suffice until 'sensors -s'
+	 *   can be run by the user.  We DO set the default 
+	 *   value for pwm1.auto_pwm_min to its maximum
+	 *   so that enabling automatic pwm fan control
+	 *   without first setting a value for pwm1.auto_pwm_min 
+	 *   will not result in potentially dangerous fan speed decrease.
+	 */
+	data->pwm1.auto_pwm_min=255;
+	/* Start monitoring */
+	value = adm1026_read_value(client, ADM1026_REG_CONFIG1);
+	/* Set MONITOR, clear interrupt acknowledge and s/w reset */
+	value = (value | CFG1_MONITOR) & (~CFG1_INT_CLEAR & ~CFG1_RESET);
+	dev_dbg(&client->dev, "Setting CONFIG to: 0x%02x\n", value);
+	data->config1 = value;
+	adm1026_write_value(client, ADM1026_REG_CONFIG1, value);
+
+	/* initialize fan_div[] to hardware defaults */
+	value = adm1026_read_value(client, ADM1026_REG_FAN_DIV_0_3) |
+		(adm1026_read_value(client, ADM1026_REG_FAN_DIV_4_7) << 8);
+	for (i = 0;i <= 7;++i) {
+		data->fan_div[i] = DIV_FROM_REG(value & 0x03);
+		value >>= 2;
+	}
+}
+
+void adm1026_print_gpio(struct i2c_client *client)
+{
+	struct adm1026_data *data = i2c_get_clientdata(client);
+	int  i;
+
+	dev_dbg(&client->dev, "GPIO config is:");
+	for (i = 0;i <= 7;++i) {
+		if (data->config2 & (1 << i)) {
+			dev_dbg(&client->dev, "\t%sGP%s%d\n",
+				data->gpio_config[i] & 0x02 ? "" : "!",
+				data->gpio_config[i] & 0x01 ? "OUT" : "IN",
+				i);
+		} else {
+			dev_dbg(&client->dev, "\tFAN%d\n", i);
+		}
+	}
+	for (i = 8;i <= 15;++i) {
+		dev_dbg(&client->dev, "\t%sGP%s%d\n",
+			data->gpio_config[i] & 0x02 ? "" : "!",
+			data->gpio_config[i] & 0x01 ? "OUT" : "IN",
+			i);
+	}
+	if (data->config3 & CFG3_GPIO16_ENABLE) {
+		dev_dbg(&client->dev, "\t%sGP%s16\n",
+			data->gpio_config[16] & 0x02 ? "" : "!",
+			data->gpio_config[16] & 0x01 ? "OUT" : "IN");
+	} else {
+		/* GPIO16 is THERM  */
+		dev_dbg(&client->dev, "\tTHERM\n");
+	}
+}
+
+void adm1026_fixup_gpio(struct i2c_client *client)
+{
+	struct adm1026_data *data = i2c_get_clientdata(client);
+	int  i;
+	int  value;
+
+	/* Make the changes requested. */
+	/* We may need to unlock/stop monitoring or soft-reset the
+	 *    chip before we can make changes.  This hasn't been
+	 *    tested much.  FIXME
+	 */
+
+	/* Make outputs */
+	for (i = 0;i <= 16;++i) {
+		if (gpio_output[i] >= 0 && gpio_output[i] <= 16) {
+			data->gpio_config[gpio_output[i]] |= 0x01;
+		}
+		/* if GPIO0-7 is output, it isn't a FAN tach */
+		if (gpio_output[i] >= 0 && gpio_output[i] <= 7) {
+			data->config2 |= 1 << gpio_output[i];
+		}
+	}
+
+	/* Input overrides output */
+	for (i = 0;i <= 16;++i) {
+		if (gpio_input[i] >= 0 && gpio_input[i] <= 16) {
+			data->gpio_config[gpio_input[i]] &= ~ 0x01;
+		}
+		/* if GPIO0-7 is input, it isn't a FAN tach */
+		if (gpio_input[i] >= 0 && gpio_input[i] <= 7) {
+			data->config2 |= 1 << gpio_input[i];
+		}
+	}
+
+	/* Inverted  */
+	for (i = 0;i <= 16;++i) {
+		if (gpio_inverted[i] >= 0 && gpio_inverted[i] <= 16) {
+			data->gpio_config[gpio_inverted[i]] &= ~ 0x02;
+		}
+	}
+
+	/* Normal overrides inverted  */
+	for (i = 0;i <= 16;++i) {
+		if (gpio_normal[i] >= 0 && gpio_normal[i] <= 16) {
+			data->gpio_config[gpio_normal[i]] |= 0x02;
+		}
+	}
+
+	/* Fan overrides input and output */
+	for (i = 0;i <= 7;++i) {
+		if (gpio_fan[i] >= 0 && gpio_fan[i] <= 7) {
+			data->config2 &= ~(1 << gpio_fan[i]);
+		}
+	}
+
+	/* Write new configs to registers */
+	adm1026_write_value(client, ADM1026_REG_CONFIG2, data->config2);
+	data->config3 = (data->config3 & 0x3f)
+			| ((data->gpio_config[16] & 0x03) << 6);
+	adm1026_write_value(client, ADM1026_REG_CONFIG3, data->config3);
+	for (i = 15, value = 0;i >= 0;--i) {
+		value <<= 2;
+		value |= data->gpio_config[i] & 0x03;
+		if ((i & 0x03) == 0) {
+			adm1026_write_value(client,
+					ADM1026_REG_GPIO_CFG_0_3 + i/4,
+					value);
+			value = 0;
+		}
+	}
+
+	/* Print the new config */
+	adm1026_print_gpio(client);
+}
+
+
+static struct adm1026_data *adm1026_update_device(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct adm1026_data *data = i2c_get_clientdata(client);
+	int i;
+	long value, alarms, gpio;
+
+	down(&data->update_lock);
+	if (!data->valid
+	    || time_after(jiffies, data->last_reading + ADM1026_DATA_INTERVAL)) {
+		/* Things that change quickly */
+		dev_dbg(&client->dev,"Reading sensor values\n");
+		for (i = 0;i <= 16;++i) {
+			data->in[i] =
+			    adm1026_read_value(client, ADM1026_REG_IN[i]);
+		}
+
+		for (i = 0;i <= 7;++i) {
+			data->fan[i] =
+			    adm1026_read_value(client, ADM1026_REG_FAN(i));
+		}
+
+		for (i = 0;i <= 2;++i) {
+			/* NOTE: temp[] is s8 and we assume 2's complement
+			 *   "conversion" in the assignment   */
+			data->temp[i] =
+			    adm1026_read_value(client, ADM1026_REG_TEMP[i]);
+		}
+
+		data->pwm1.pwm = adm1026_read_value(client, 
+			ADM1026_REG_PWM);
+		data->analog_out = adm1026_read_value(client, 
+			ADM1026_REG_DAC);
+		/* GPIO16 is MSbit of alarms, move it to gpio */
+		alarms = adm1026_read_value(client, ADM1026_REG_STATUS4);
+		gpio = alarms & 0x80 ? 0x0100 : 0;  /* GPIO16 */
+		alarms &= 0x7f;
+		alarms <<= 8;
+		alarms |= adm1026_read_value(client, ADM1026_REG_STATUS3);
+		alarms <<= 8;
+		alarms |= adm1026_read_value(client, ADM1026_REG_STATUS2);
+		alarms <<= 8;
+		alarms |= adm1026_read_value(client, ADM1026_REG_STATUS1);
+		data->alarms = alarms;
+
+		/* Read the GPIO values */
+		gpio |= adm1026_read_value(client, 
+			ADM1026_REG_GPIO_STATUS_8_15);
+		gpio <<= 8;
+		gpio |= adm1026_read_value(client, 
+			ADM1026_REG_GPIO_STATUS_0_7);
+		data->gpio = gpio;
+
+		data->last_reading = jiffies;
+	};  /* last_reading */
+
+	if (!data->valid ||
+	    time_after(jiffies, data->last_config + ADM1026_CONFIG_INTERVAL)) {
+		/* Things that don't change often */
+		dev_dbg(&client->dev, "Reading config values\n");
+		for (i = 0;i <= 16;++i) {
+			data->in_min[i] = adm1026_read_value(client, 
+				ADM1026_REG_IN_MIN[i]);
+			data->in_max[i] = adm1026_read_value(client, 
+				ADM1026_REG_IN_MAX[i]);
+		}
+
+		value = adm1026_read_value(client, ADM1026_REG_FAN_DIV_0_3)
+			| (adm1026_read_value(client, ADM1026_REG_FAN_DIV_4_7)
+			<< 8);
+		for (i = 0;i <= 7;++i) {
+			data->fan_min[i] = adm1026_read_value(client, 
+				ADM1026_REG_FAN_MIN(i));
+			data->fan_div[i] = DIV_FROM_REG(value & 0x03);
+			value >>= 2;
+		}
+
+		for (i = 0; i <= 2; ++i) {
+			/* NOTE: temp_xxx[] are s8 and we assume 2's 
+			 *    complement "conversion" in the assignment
+			 */
+			data->temp_min[i] = adm1026_read_value(client, 
+				ADM1026_REG_TEMP_MIN[i]);
+			data->temp_max[i] = adm1026_read_value(client, 
+				ADM1026_REG_TEMP_MAX[i]);
+			data->temp_tmin[i] = adm1026_read_value(client, 
+				ADM1026_REG_TEMP_TMIN[i]);
+			data->temp_crit[i] = adm1026_read_value(client, 
+				ADM1026_REG_TEMP_THERM[i]);
+			data->temp_offset[i] = adm1026_read_value(client, 
+				ADM1026_REG_TEMP_OFFSET[i]);
+		}
+
+		/* Read the STATUS/alarm masks */
+		alarms  = adm1026_read_value(client, ADM1026_REG_MASK4);
+		gpio    = alarms & 0x80 ? 0x0100 : 0;  /* GPIO16 */
+		alarms  = (alarms & 0x7f) << 8;
+		alarms |= adm1026_read_value(client, ADM1026_REG_MASK3);
+		alarms <<= 8;
+		alarms |= adm1026_read_value(client, ADM1026_REG_MASK2);
+		alarms <<= 8;
+		alarms |= adm1026_read_value(client, ADM1026_REG_MASK1);
+		data->alarm_mask = alarms;
+
+		/* Read the GPIO values */
+		gpio |= adm1026_read_value(client, 
+			ADM1026_REG_GPIO_MASK_8_15);
+		gpio <<= 8;
+		gpio |= adm1026_read_value(client, ADM1026_REG_GPIO_MASK_0_7);
+		data->gpio_mask = gpio;
+
+		/* Read various values from CONFIG1 */
+		data->config1 = adm1026_read_value(client, 
+			ADM1026_REG_CONFIG1);
+		if (data->config1 & CFG1_PWM_AFC) {
+			data->pwm1.enable = 2;
+			data->pwm1.auto_pwm_min = 
+				PWM_MIN_FROM_REG(data->pwm1.pwm);
+		}
+		/* Read the GPIO config */
+		data->config2 = adm1026_read_value(client, 
+			ADM1026_REG_CONFIG2);
+		data->config3 = adm1026_read_value(client, 
+			ADM1026_REG_CONFIG3);
+		data->gpio_config[16] = (data->config3 >> 6) & 0x03;
+
+		value = 0;
+		for (i = 0;i <= 15;++i) {
+			if ((i & 0x03) == 0) {
+				value = adm1026_read_value(client,
+					    ADM1026_REG_GPIO_CFG_0_3 + i/4);
+			}
+			data->gpio_config[i] = value & 0x03;
+			value >>= 2;
+		}
+
+		data->last_config = jiffies;
+	};  /* last_config */
+
+	dev_dbg(&client->dev, "Setting VID from GPIO11-15.\n");
+	data->vid = (data->gpio >> 11) & 0x1f;
+	data->valid = 1;
+	up(&data->update_lock);
+	return data;
+}
+
+static ssize_t show_in(struct device *dev, char *buf, int nr)
+{
+	struct adm1026_data *data = adm1026_update_device(dev);
+	return sprintf(buf,"%d\n", INS_FROM_REG(nr, data->in[nr]));
+}
+static ssize_t show_in_min(struct device *dev, char *buf, int nr) 
+{
+	struct adm1026_data *data = adm1026_update_device(dev); 
+	return sprintf(buf,"%d\n", INS_FROM_REG(nr, data->in_min[nr]));
+}
+static ssize_t set_in_min(struct device *dev, const char *buf, 
+		size_t count, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct adm1026_data *data = i2c_get_clientdata(client);
+	int val = simple_strtol(buf, NULL, 10);
+
+	down(&data->update_lock);
+	data->in_min[nr] = INS_TO_REG(nr, val);
+	adm1026_write_value(client, ADM1026_REG_IN_MIN[nr], data->in_min[nr]);
+	up(&data->update_lock);
+	return count; 
+}
+static ssize_t show_in_max(struct device *dev, char *buf, int nr)
+{
+	struct adm1026_data *data = adm1026_update_device(dev);
+	return sprintf(buf,"%d\n", INS_FROM_REG(nr, data->in_max[nr]));
+}
+static ssize_t set_in_max(struct device *dev, const char *buf,
+		size_t count, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct adm1026_data *data = i2c_get_clientdata(client);
+	int val = simple_strtol(buf, NULL, 10);
+
+	down(&data->update_lock);
+	data->in_max[nr] = INS_TO_REG(nr, val);
+	adm1026_write_value(client, ADM1026_REG_IN_MAX[nr], data->in_max[nr]);
+	up(&data->update_lock);
+	return count;
+}
+
+#define in_reg(offset)                                                    \
+static ssize_t show_in##offset (struct device *dev, char *buf)            \
+{                                                                         \
+	return show_in(dev, buf, offset);                                 \
+}                                                                         \
+static ssize_t show_in##offset##_min (struct device *dev, char *buf)      \
+{                                                                         \
+	return show_in_min(dev, buf, offset);                             \
+}                                                                         \
+static ssize_t set_in##offset##_min (struct device *dev,                  \
+	const char *buf, size_t count)                                    \
+{                                                                         \
+	return set_in_min(dev, buf, count, offset);                       \
+}                                                                         \
+static ssize_t show_in##offset##_max (struct device *dev, char *buf)      \
+{                                                                         \
+	return show_in_max(dev, buf, offset);                             \
+}                                                                         \
+static ssize_t set_in##offset##_max (struct device *dev,                  \
+	const char *buf, size_t count)                                    \
+{                                                                         \
+	return set_in_max(dev, buf, count, offset);                       \
+}                                                                         \
+static DEVICE_ATTR(in##offset##_input, S_IRUGO, show_in##offset, NULL);   \
+static DEVICE_ATTR(in##offset##_min, S_IRUGO | S_IWUSR,                   \
+		show_in##offset##_min, set_in##offset##_min);             \
+static DEVICE_ATTR(in##offset##_max, S_IRUGO | S_IWUSR,                   \
+		show_in##offset##_max, set_in##offset##_max);
+
+
+in_reg(0);
+in_reg(1);
+in_reg(2);
+in_reg(3);
+in_reg(4);
+in_reg(5);
+in_reg(6);
+in_reg(7);
+in_reg(8);
+in_reg(9);
+in_reg(10);
+in_reg(11);
+in_reg(12);
+in_reg(13);
+in_reg(14);
+in_reg(15);
+
+static ssize_t show_in16(struct device *dev, char *buf)
+{
+	struct adm1026_data *data = adm1026_update_device(dev);
+	return sprintf(buf,"%d\n", INS_FROM_REG(16, data->in[16]) -
+		NEG12_OFFSET);
+}
+static ssize_t show_in16_min(struct device *dev, char *buf) 
+{
+	struct adm1026_data *data = adm1026_update_device(dev); 
+	return sprintf(buf,"%d\n", INS_FROM_REG(16, data->in_min[16])
+		- NEG12_OFFSET);
+}
+static ssize_t set_in16_min(struct device *dev, const char *buf, size_t count)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct adm1026_data *data = i2c_get_clientdata(client);
+	int val = simple_strtol(buf, NULL, 10);
+
+	down(&data->update_lock);
+	data->in_min[16] = INS_TO_REG(16, val + NEG12_OFFSET);
+	adm1026_write_value(client, ADM1026_REG_IN_MIN[16], data->in_min[16]);
+	up(&data->update_lock);
+	return count; 
+}
+static ssize_t show_in16_max(struct device *dev, char *buf)
+{
+	struct adm1026_data *data = adm1026_update_device(dev);
+	return sprintf(buf,"%d\n", INS_FROM_REG(16, data->in_max[16])
+			- NEG12_OFFSET);
+}
+static ssize_t set_in16_max(struct device *dev, const char *buf, size_t count)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct adm1026_data *data = i2c_get_clientdata(client);
+	int val = simple_strtol(buf, NULL, 10);
+
+	down(&data->update_lock);
+	data->in_max[16] = INS_TO_REG(16, val+NEG12_OFFSET);
+	adm1026_write_value(client, ADM1026_REG_IN_MAX[16], data->in_max[16]);
+	up(&data->update_lock);
+	return count;
+}
+
+static DEVICE_ATTR(in16_input, S_IRUGO, show_in16, NULL);
+static DEVICE_ATTR(in16_min, S_IRUGO | S_IWUSR, show_in16_min, set_in16_min);
+static DEVICE_ATTR(in16_max, S_IRUGO | S_IWUSR, show_in16_max, set_in16_max);
+
+
+
+
+/* Now add fan read/write functions */
+
+static ssize_t show_fan(struct device *dev, char *buf, int nr)
+{
+	struct adm1026_data *data = adm1026_update_device(dev);
+	return sprintf(buf,"%d\n", FAN_FROM_REG(data->fan[nr],
+		data->fan_div[nr]));
+}
+static ssize_t show_fan_min(struct device *dev, char *buf, int nr)
+{
+	struct adm1026_data *data = adm1026_update_device(dev);
+	return sprintf(buf,"%d\n", FAN_FROM_REG(data->fan_min[nr],
+		data->fan_div[nr]));
+}
+static ssize_t set_fan_min(struct device *dev, const char *buf,
+		size_t count, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct adm1026_data *data = i2c_get_clientdata(client);
+	int val = simple_strtol(buf, NULL, 10);
+
+	down(&data->update_lock);
+	data->fan_min[nr] = FAN_TO_REG(val, data->fan_div[nr]);
+	adm1026_write_value(client, ADM1026_REG_FAN_MIN(nr),
+		data->fan_min[nr]);
+	up(&data->update_lock);
+	return count;
+}
+
+#define fan_offset(offset)                                                  \
+static ssize_t show_fan_##offset (struct device *dev, char *buf)            \
+{                                                                           \
+	return show_fan(dev, buf, offset - 1);                              \
+}                                                                           \
+static ssize_t show_fan_##offset##_min (struct device *dev, char *buf)      \
+{                                                                           \
+	return show_fan_min(dev, buf, offset - 1);                          \
+}                                                                           \
+static ssize_t set_fan_##offset##_min (struct device *dev,                  \
+	const char *buf, size_t count)                                      \
+{                                                                           \
+	return set_fan_min(dev, buf, count, offset - 1);                    \
+}                                                                           \
+static DEVICE_ATTR(fan##offset##_input, S_IRUGO, show_fan_##offset, NULL);  \
+static DEVICE_ATTR(fan##offset##_min, S_IRUGO | S_IWUSR,                    \
+		show_fan_##offset##_min, set_fan_##offset##_min);
+
+fan_offset(1);
+fan_offset(2);
+fan_offset(3);
+fan_offset(4);
+fan_offset(5);
+fan_offset(6);
+fan_offset(7);
+fan_offset(8);
+
+/* Adjust fan_min to account for new fan divisor */
+static void fixup_fan_min(struct device *dev, int fan, int old_div)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct adm1026_data *data = i2c_get_clientdata(client);
+	int    new_min;
+	int    new_div = data->fan_div[fan];
+
+	/* 0 and 0xff are special.  Don't adjust them */
+	if (data->fan_min[fan] == 0 || data->fan_min[fan] == 0xff) {
+		return;
+	}
+
+	new_min = data->fan_min[fan] * old_div / new_div;
+	new_min = SENSORS_LIMIT(new_min, 1, 254);
+	data->fan_min[fan] = new_min;
+	adm1026_write_value(client, ADM1026_REG_FAN_MIN(fan), new_min);
+}
+
+/* Now add fan_div read/write functions */
+static ssize_t show_fan_div(struct device *dev, char *buf, int nr)
+{
+	struct adm1026_data *data = adm1026_update_device(dev);
+	return sprintf(buf,"%d\n", data->fan_div[nr]);
+}
+static ssize_t set_fan_div(struct device *dev, const char *buf,
+		size_t count, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct adm1026_data *data = i2c_get_clientdata(client);
+	int    val,orig_div,new_div,shift;
+
+	val = simple_strtol(buf, NULL, 10);
+	new_div = DIV_TO_REG(val); 
+	if (new_div == 0) {
+		return -EINVAL;
+	}
+	down(&data->update_lock);
+	orig_div = data->fan_div[nr];
+	data->fan_div[nr] = DIV_FROM_REG(new_div);
+
+	if (nr < 4) { /* 0 <= nr < 4 */
+		shift = 2 * nr;
+		adm1026_write_value(client, ADM1026_REG_FAN_DIV_0_3,
+			((DIV_TO_REG(orig_div) & (~(0x03 << shift))) |
+			(new_div << shift)));
+	} else { /* 3 < nr < 8 */
+		shift = 2 * (nr - 4);
+		adm1026_write_value(client, ADM1026_REG_FAN_DIV_4_7,
+			((DIV_TO_REG(orig_div) & (~(0x03 << (2 * shift)))) |
+			(new_div << shift)));
+	}
+
+	if (data->fan_div[nr] != orig_div) {
+		fixup_fan_min(dev,nr,orig_div);
+	}
+	up(&data->update_lock);
+	return count;
+}
+
+#define fan_offset_div(offset)                                          \
+static ssize_t show_fan_##offset##_div (struct device *dev, char *buf)  \
+{                                                                       \
+	return show_fan_div(dev, buf, offset - 1);                      \
+}                                                                       \
+static ssize_t set_fan_##offset##_div (struct device *dev,              \
+	const char *buf, size_t count)                                  \
+{                                                                       \
+	return set_fan_div(dev, buf, count, offset - 1);                \
+}                                                                       \
+static DEVICE_ATTR(fan##offset##_div, S_IRUGO | S_IWUSR,                \
+		show_fan_##offset##_div, set_fan_##offset##_div);
+
+fan_offset_div(1);
+fan_offset_div(2);
+fan_offset_div(3);
+fan_offset_div(4);
+fan_offset_div(5);
+fan_offset_div(6);
+fan_offset_div(7);
+fan_offset_div(8);
+
+/* Temps */
+static ssize_t show_temp(struct device *dev, char *buf, int nr)
+{
+	struct adm1026_data *data = adm1026_update_device(dev);
+	return sprintf(buf,"%d\n", TEMP_FROM_REG(data->temp[nr]));
+}
+static ssize_t show_temp_min(struct device *dev, char *buf, int nr)
+{
+	struct adm1026_data *data = adm1026_update_device(dev);
+	return sprintf(buf,"%d\n", TEMP_FROM_REG(data->temp_min[nr]));
+}
+static ssize_t set_temp_min(struct device *dev, const char *buf,
+		size_t count, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct adm1026_data *data = i2c_get_clientdata(client);
+	int val = simple_strtol(buf, NULL, 10);
+
+	down(&data->update_lock);
+	data->temp_min[nr] = TEMP_TO_REG(val);
+	adm1026_write_value(client, ADM1026_REG_TEMP_MIN[nr],
+		data->temp_min[nr]);
+	up(&data->update_lock);
+	return count;
+}
+static ssize_t show_temp_max(struct device *dev, char *buf, int nr)
+{
+	struct adm1026_data *data = adm1026_update_device(dev);
+	return sprintf(buf,"%d\n", TEMP_FROM_REG(data->temp_max[nr]));
+}
+static ssize_t set_temp_max(struct device *dev, const char *buf,
+		size_t count, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct adm1026_data *data = i2c_get_clientdata(client);
+	int val = simple_strtol(buf, NULL, 10);
+
+	down(&data->update_lock);
+	data->temp_max[nr] = TEMP_TO_REG(val);
+	adm1026_write_value(client, ADM1026_REG_TEMP_MAX[nr],
+		data->temp_max[nr]);
+	up(&data->update_lock);
+	return count;
+}
+#define temp_reg(offset)                                                      \
+static ssize_t show_temp_##offset (struct device *dev, char *buf)             \
+{                                                                             \
+	return show_temp(dev, buf, offset - 1);                               \
+}                                                                             \
+static ssize_t show_temp_##offset##_min (struct device *dev, char *buf)       \
+{                                                                             \
+	return show_temp_min(dev, buf, offset - 1);                           \
+}                                                                             \
+static ssize_t show_temp_##offset##_max (struct device *dev, char *buf)       \
+{                                                                             \
+	return show_temp_max(dev, buf, offset - 1);                           \
+}                                                                             \
+static ssize_t set_temp_##offset##_min (struct device *dev,                   \
+	const char *buf, size_t count)                                        \
+{                                                                             \
+	return set_temp_min(dev, buf, count, offset - 1);                     \
+}                                                                             \
+static ssize_t set_temp_##offset##_max (struct device *dev,                   \
+	const char *buf, size_t count)                                        \
+{                                                                             \
+	return set_temp_max(dev, buf, count, offset - 1);                     \
+}                                                                             \
+static DEVICE_ATTR(temp##offset##_input, S_IRUGO, show_temp_##offset, NULL);  \
+static DEVICE_ATTR(temp##offset##_min, S_IRUGO | S_IWUSR,                     \
+		show_temp_##offset##_min, set_temp_##offset##_min);           \
+static DEVICE_ATTR(temp##offset##_max, S_IRUGO | S_IWUSR,                     \
+		show_temp_##offset##_max, set_temp_##offset##_max);
+
+
+temp_reg(1);
+temp_reg(2);
+temp_reg(3);
+
+static ssize_t show_temp_offset(struct device *dev, char *buf, int nr)
+{
+	struct adm1026_data *data = adm1026_update_device(dev);
+	return sprintf(buf,"%d\n", TEMP_FROM_REG(data->temp_offset[nr]));
+}
+static ssize_t set_temp_offset(struct device *dev, const char *buf,
+		size_t count, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct adm1026_data *data = i2c_get_clientdata(client);
+	int val = simple_strtol(buf, NULL, 10);
+
+	down(&data->update_lock);
+	data->temp_offset[nr] = TEMP_TO_REG(val);
+	adm1026_write_value(client, ADM1026_REG_TEMP_OFFSET[nr],
+		data->temp_offset[nr]);
+	up(&data->update_lock);
+	return count;
+}
+
+#define temp_offset_reg(offset)                                             \
+static ssize_t show_temp_##offset##_offset (struct device *dev, char *buf)  \
+{                                                                           \
+	return show_temp_offset(dev, buf, offset - 1);                      \
+}                                                                           \
+static ssize_t set_temp_##offset##_offset (struct device *dev,              \
+	const char *buf, size_t count)                                      \
+{                                                                           \
+	return set_temp_offset(dev, buf, count, offset - 1);                \
+}                                                                           \
+static DEVICE_ATTR(temp##offset##_offset, S_IRUGO | S_IWUSR,                \
+		show_temp_##offset##_offset, set_temp_##offset##_offset);
+
+temp_offset_reg(1);
+temp_offset_reg(2);
+temp_offset_reg(3);
+
+static ssize_t show_temp_auto_point1_temp_hyst(struct device *dev, char *buf,
+		int nr)
+{
+	struct adm1026_data *data = adm1026_update_device(dev);
+	return sprintf(buf,"%d\n", TEMP_FROM_REG(
+		ADM1026_FAN_ACTIVATION_TEMP_HYST + data->temp_tmin[nr]));
+}
+static ssize_t show_temp_auto_point2_temp(struct device *dev, char *buf,
+		int nr)
+{
+	struct adm1026_data *data = adm1026_update_device(dev);
+	return sprintf(buf,"%d\n", TEMP_FROM_REG(data->temp_tmin[nr] +
+		ADM1026_FAN_CONTROL_TEMP_RANGE));
+}
+static ssize_t show_temp_auto_point1_temp(struct device *dev, char *buf,
+		int nr)
+{
+	struct adm1026_data *data = adm1026_update_device(dev);
+	return sprintf(buf,"%d\n", TEMP_FROM_REG(data->temp_tmin[nr]));
+}
+static ssize_t set_temp_auto_point1_temp(struct device *dev, const char *buf,
+		size_t count, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct adm1026_data *data = i2c_get_clientdata(client);
+	int val = simple_strtol(buf, NULL, 10);
+
+	down(&data->update_lock);
+	data->temp_tmin[nr] = TEMP_TO_REG(val);
+	adm1026_write_value(client, ADM1026_REG_TEMP_TMIN[nr],
+		data->temp_tmin[nr]);
+	up(&data->update_lock);
+	return count;
+}
+
+#define temp_auto_point(offset)                                             \
+static ssize_t show_temp##offset##_auto_point1_temp (struct device *dev,    \
+	char *buf)                                                          \
+{                                                                           \
+	return show_temp_auto_point1_temp(dev, buf, offset - 1);            \
+}                                                                           \
+static ssize_t set_temp##offset##_auto_point1_temp (struct device *dev,     \
+	const char *buf, size_t count)                                      \
+{                                                                           \
+	return set_temp_auto_point1_temp(dev, buf, count, offset - 1);      \
+}                                                                           \
+static ssize_t show_temp##offset##_auto_point1_temp_hyst (struct device     \
+	*dev, char *buf)                                                    \
+{                                                                           \
+	return show_temp_auto_point1_temp_hyst(dev, buf, offset - 1);       \
+}                                                                           \
+static ssize_t show_temp##offset##_auto_point2_temp (struct device *dev,    \
+	 char *buf)                                                         \
+{                                                                           \
+	return show_temp_auto_point2_temp(dev, buf, offset - 1);            \
+}                                                                           \
+static DEVICE_ATTR(temp##offset##_auto_point1_temp, S_IRUGO | S_IWUSR,      \
+		show_temp##offset##_auto_point1_temp,                       \
+		set_temp##offset##_auto_point1_temp);                       \
+static DEVICE_ATTR(temp##offset##_auto_point1_temp_hyst, S_IRUGO,           \
+		show_temp##offset##_auto_point1_temp_hyst, NULL);           \
+static DEVICE_ATTR(temp##offset##_auto_point2_temp, S_IRUGO,                \
+		show_temp##offset##_auto_point2_temp, NULL);
+
+temp_auto_point(1);
+temp_auto_point(2);
+temp_auto_point(3);
+
+static ssize_t show_temp_crit_enable(struct device *dev, char *buf)
+{
+	struct adm1026_data *data = adm1026_update_device(dev);
+	return sprintf(buf,"%d\n", (data->config1 & CFG1_THERM_HOT) >> 4);
+}
+static ssize_t set_temp_crit_enable(struct device *dev, const char *buf,
+		size_t count)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct adm1026_data *data = i2c_get_clientdata(client);
+	int val = simple_strtol(buf, NULL, 10);
+
+	if ((val == 1) || (val==0)) {
+		down(&data->update_lock);
+		data->config1 = (data->config1 & ~CFG1_THERM_HOT) | (val << 4);
+		adm1026_write_value(client, ADM1026_REG_CONFIG1, 
+			data->config1);
+		up(&data->update_lock);
+	}
+	return count;
+}
+
+static DEVICE_ATTR(temp1_crit_enable, S_IRUGO | S_IWUSR, 
+	show_temp_crit_enable, set_temp_crit_enable);
+
+static DEVICE_ATTR(temp2_crit_enable, S_IRUGO | S_IWUSR, 
+	show_temp_crit_enable, set_temp_crit_enable);
+
+static DEVICE_ATTR(temp3_crit_enable, S_IRUGO | S_IWUSR, 
+	show_temp_crit_enable, set_temp_crit_enable);
+
+
+static ssize_t show_temp_crit(struct device *dev, char *buf, int nr)
+{
+	struct adm1026_data *data = adm1026_update_device(dev);
+	return sprintf(buf,"%d\n", TEMP_FROM_REG(data->temp_crit[nr]));
+}
+static ssize_t set_temp_crit(struct device *dev, const char *buf,
+		size_t count, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct adm1026_data *data = i2c_get_clientdata(client);
+	int val = simple_strtol(buf, NULL, 10);
+
+	down(&data->update_lock);
+	data->temp_crit[nr] = TEMP_TO_REG(val);
+	adm1026_write_value(client, ADM1026_REG_TEMP_THERM[nr],
+		data->temp_crit[nr]);
+	up(&data->update_lock);
+	return count;
+}
+
+#define temp_crit_reg(offset)                                             \
+static ssize_t show_temp_##offset##_crit (struct device *dev, char *buf)  \
+{                                                                         \
+	return show_temp_crit(dev, buf, offset - 1);                      \
+}                                                                         \
+static ssize_t set_temp_##offset##_crit (struct device *dev,              \
+	const char *buf, size_t count)                                    \
+{                                                                         \
+	return set_temp_crit(dev, buf, count, offset - 1);                \
+}                                                                         \
+static DEVICE_ATTR(temp##offset##_crit, S_IRUGO | S_IWUSR,                \
+		show_temp_##offset##_crit, set_temp_##offset##_crit);
+
+temp_crit_reg(1);
+temp_crit_reg(2);
+temp_crit_reg(3);
+
+static ssize_t show_analog_out_reg(struct device *dev, char *buf)
+{
+	struct adm1026_data *data = adm1026_update_device(dev);
+	return sprintf(buf,"%d\n", DAC_FROM_REG(data->analog_out));
+}
+static ssize_t set_analog_out_reg(struct device *dev, const char *buf,
+		size_t count)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct adm1026_data *data = i2c_get_clientdata(client);
+	int val = simple_strtol(buf, NULL, 10);
+
+	down(&data->update_lock);
+	data->analog_out = DAC_TO_REG(val);
+	adm1026_write_value(client, ADM1026_REG_DAC, data->analog_out);
+	up(&data->update_lock);
+	return count;
+}
+
+static DEVICE_ATTR(analog_out, S_IRUGO | S_IWUSR, show_analog_out_reg, 
+	set_analog_out_reg);
+
+static ssize_t show_vid_reg(struct device *dev, char *buf)
+{
+	struct adm1026_data *data = adm1026_update_device(dev);
+	return sprintf(buf,"%d\n", vid_from_reg(data->vid & 0x3f, data->vrm));
+}
+
+static DEVICE_ATTR(vid, S_IRUGO, show_vid_reg, NULL);
+
+static ssize_t show_vrm_reg(struct device *dev, char *buf)
+{
+	struct adm1026_data *data = adm1026_update_device(dev);
+	return sprintf(buf,"%d\n", data->vrm);
+}
+static ssize_t store_vrm_reg(struct device *dev, const char *buf,
+		size_t count)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct adm1026_data *data = i2c_get_clientdata(client);
+
+	data->vrm = simple_strtol(buf, NULL, 10);
+	return count;
+}
+
+static DEVICE_ATTR(vrm, S_IRUGO | S_IWUSR, show_vrm_reg, store_vrm_reg);
+
+static ssize_t show_alarms_reg(struct device *dev, char *buf)
+{
+	struct adm1026_data *data = adm1026_update_device(dev);
+	return sprintf(buf, "%ld\n", (long) (data->alarms));
+}
+
+static DEVICE_ATTR(alarms, S_IRUGO, show_alarms_reg, NULL);
+
+static ssize_t show_alarm_mask(struct device *dev, char *buf)
+{
+	struct adm1026_data *data = adm1026_update_device(dev);
+	return sprintf(buf,"%ld\n", data->alarm_mask);
+}
+static ssize_t set_alarm_mask(struct device *dev, const char *buf,
+		size_t count)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct adm1026_data *data = i2c_get_clientdata(client);
+	int val = simple_strtol(buf, NULL, 10);
+	unsigned long mask;
+
+	down(&data->update_lock);
+	data->alarm_mask = val & 0x7fffffff;
+	mask = data->alarm_mask
+		| (data->gpio_mask & 0x10000 ? 0x80000000 : 0);
+	adm1026_write_value(client, ADM1026_REG_MASK1,
+		mask & 0xff);
+	mask >>= 8;
+	adm1026_write_value(client, ADM1026_REG_MASK2,
+		mask & 0xff);
+	mask >>= 8;
+	adm1026_write_value(client, ADM1026_REG_MASK3,
+		mask & 0xff);
+	mask >>= 8;
+	adm1026_write_value(client, ADM1026_REG_MASK4,
+		mask & 0xff);
+	up(&data->update_lock);
+	return count;
+}
+
+static DEVICE_ATTR(alarm_mask, S_IRUGO | S_IWUSR, show_alarm_mask,
+	set_alarm_mask);
+
+
+static ssize_t show_gpio(struct device *dev, char *buf)
+{
+	struct adm1026_data *data = adm1026_update_device(dev);
+	return sprintf(buf,"%ld\n", data->gpio);
+}
+static ssize_t set_gpio(struct device *dev, const char *buf,
+		size_t count)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct adm1026_data *data = i2c_get_clientdata(client);
+	int val = simple_strtol(buf, NULL, 10);
+	long   gpio;
+
+	down(&data->update_lock);
+	data->gpio = val & 0x1ffff;
+	gpio = data->gpio;
+	adm1026_write_value(client, ADM1026_REG_GPIO_STATUS_0_7,gpio & 0xff);
+	gpio >>= 8;
+	adm1026_write_value(client, ADM1026_REG_GPIO_STATUS_8_15,gpio & 0xff);
+	gpio = ((gpio >> 1) & 0x80) | (data->alarms >> 24 & 0x7f);
+	adm1026_write_value(client, ADM1026_REG_STATUS4,gpio & 0xff);
+	up(&data->update_lock);
+	return count;
+}
+
+static DEVICE_ATTR(gpio, S_IRUGO | S_IWUSR, show_gpio, set_gpio);
+
+
+static ssize_t show_gpio_mask(struct device *dev, char *buf)
+{
+	struct adm1026_data *data = adm1026_update_device(dev);
+	return sprintf(buf,"%ld\n", data->gpio_mask);
+}
+static ssize_t set_gpio_mask(struct device *dev, const char *buf,
+		size_t count)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct adm1026_data *data = i2c_get_clientdata(client);
+	int val = simple_strtol(buf, NULL, 10);
+	long   mask;
+
+	down(&data->update_lock);
+	data->gpio_mask = val & 0x1ffff;
+	mask = data->gpio_mask;
+	adm1026_write_value(client, ADM1026_REG_GPIO_MASK_0_7,mask & 0xff);
+	mask >>= 8;
+	adm1026_write_value(client, ADM1026_REG_GPIO_MASK_8_15,mask & 0xff);
+	mask = ((mask >> 1) & 0x80) | (data->alarm_mask >> 24 & 0x7f);
+	adm1026_write_value(client, ADM1026_REG_MASK1,mask & 0xff);
+	up(&data->update_lock);
+	return count;
+}
+
+static DEVICE_ATTR(gpio_mask, S_IRUGO | S_IWUSR, show_gpio_mask, set_gpio_mask);
+
+static ssize_t show_pwm_reg(struct device *dev, char *buf)
+{
+	struct adm1026_data *data = adm1026_update_device(dev);
+	return sprintf(buf,"%d\n", PWM_FROM_REG(data->pwm1.pwm));
+}
+static ssize_t set_pwm_reg(struct device *dev, const char *buf,
+		size_t count)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct adm1026_data *data = i2c_get_clientdata(client);
+
+	if (data->pwm1.enable == 1) {
+		int val = simple_strtol(buf, NULL, 10);
+
+		down(&data->update_lock);
+		data->pwm1.pwm = PWM_TO_REG(val);
+		adm1026_write_value(client, ADM1026_REG_PWM, data->pwm1.pwm);
+		up(&data->update_lock);
+	}
+	return count;
+}
+static ssize_t show_auto_pwm_min(struct device *dev, char *buf)
+{
+	struct adm1026_data *data = adm1026_update_device(dev);
+	return sprintf(buf,"%d\n", data->pwm1.auto_pwm_min);
+}
+static ssize_t set_auto_pwm_min(struct device *dev, const char *buf,
+		size_t count)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct adm1026_data *data = i2c_get_clientdata(client);
+	int val = simple_strtol(buf, NULL, 10);
+
+	down(&data->update_lock);
+	data->pwm1.auto_pwm_min = SENSORS_LIMIT(val,0,255);
+	if (data->pwm1.enable == 2) { /* apply immediately */
+		data->pwm1.pwm = PWM_TO_REG((data->pwm1.pwm & 0x0f) |
+			PWM_MIN_TO_REG(data->pwm1.auto_pwm_min)); 
+		adm1026_write_value(client, ADM1026_REG_PWM, data->pwm1.pwm);
+	}
+	up(&data->update_lock);
+	return count;
+}
+static ssize_t show_auto_pwm_max(struct device *dev, char *buf)
+{
+	return sprintf(buf,"%d\n", ADM1026_PWM_MAX);
+}
+static ssize_t show_pwm_enable(struct device *dev, char *buf)
+{
+	struct adm1026_data *data = adm1026_update_device(dev);
+	return sprintf(buf,"%d\n", data->pwm1.enable);
+}
+static ssize_t set_pwm_enable(struct device *dev, const char *buf,
+		size_t count)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct adm1026_data *data = i2c_get_clientdata(client);
+	int val = simple_strtol(buf, NULL, 10);
+	int     old_enable;
+
+	if ((val >= 0) && (val < 3)) {
+		down(&data->update_lock);
+		old_enable = data->pwm1.enable;
+		data->pwm1.enable = val;
+		data->config1 = (data->config1 & ~CFG1_PWM_AFC)
+				| ((val == 2) ? CFG1_PWM_AFC : 0);
+		adm1026_write_value(client, ADM1026_REG_CONFIG1,
+			data->config1);
+		if (val == 2) {  /* apply pwm1_auto_pwm_min to pwm1 */
+			data->pwm1.pwm = PWM_TO_REG((data->pwm1.pwm & 0x0f) |
+				PWM_MIN_TO_REG(data->pwm1.auto_pwm_min)); 
+			adm1026_write_value(client, ADM1026_REG_PWM, 
+				data->pwm1.pwm);
+		} else if (!((old_enable == 1) && (val == 1))) {
+			/* set pwm to safe value */
+			data->pwm1.pwm = 255;
+			adm1026_write_value(client, ADM1026_REG_PWM, 
+				data->pwm1.pwm);
+		}
+		up(&data->update_lock);
+	}
+	return count;
+}
+
+/* enable PWM fan control */
+static DEVICE_ATTR(pwm1, S_IRUGO | S_IWUSR, show_pwm_reg, set_pwm_reg); 
+static DEVICE_ATTR(pwm2, S_IRUGO | S_IWUSR, show_pwm_reg, set_pwm_reg); 
+static DEVICE_ATTR(pwm3, S_IRUGO | S_IWUSR, show_pwm_reg, set_pwm_reg); 
+static DEVICE_ATTR(pwm1_enable, S_IRUGO | S_IWUSR, show_pwm_enable, 
+	set_pwm_enable);
+static DEVICE_ATTR(pwm2_enable, S_IRUGO | S_IWUSR, show_pwm_enable, 
+	set_pwm_enable);
+static DEVICE_ATTR(pwm3_enable, S_IRUGO | S_IWUSR, show_pwm_enable, 
+	set_pwm_enable);
+static DEVICE_ATTR(temp1_auto_point1_pwm, S_IRUGO | S_IWUSR, 
+	show_auto_pwm_min, set_auto_pwm_min);
+static DEVICE_ATTR(temp2_auto_point1_pwm, S_IRUGO | S_IWUSR, 
+	show_auto_pwm_min, set_auto_pwm_min);
+static DEVICE_ATTR(temp3_auto_point1_pwm, S_IRUGO | S_IWUSR, 
+	show_auto_pwm_min, set_auto_pwm_min);
+
+static DEVICE_ATTR(temp1_auto_point2_pwm, S_IRUGO, show_auto_pwm_max, NULL);
+static DEVICE_ATTR(temp2_auto_point2_pwm, S_IRUGO, show_auto_pwm_max, NULL);
+static DEVICE_ATTR(temp3_auto_point2_pwm, S_IRUGO, show_auto_pwm_max, NULL);
+
+int adm1026_detect(struct i2c_adapter *adapter, int address,
+		int kind)
+{
+	int company, verstep;
+	struct i2c_client *new_client;
+	struct adm1026_data *data;
+	int err = 0;
+	const char *type_name = "";
+
+	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) {
+		/* We need to be able to do byte I/O */
+		goto exit;
+	};
+
+	/* OK. For now, we presume we have a valid client. We now create the
+	   client structure, even though we cannot fill it completely yet.
+	   But it allows us to access adm1026_{read,write}_value. */
+
+	if (!(data = kmalloc(sizeof(struct adm1026_data), GFP_KERNEL))) {
+		err = -ENOMEM;
+		goto exit;
+	}
+
+	memset(data, 0, sizeof(struct adm1026_data));
+
+	new_client = &data->client;
+	i2c_set_clientdata(new_client, data);
+	new_client->addr = address;
+	new_client->adapter = adapter;
+	new_client->driver = &adm1026_driver;
+	new_client->flags = 0;
+
+	/* Now, we do the remaining detection. */
+
+	company = adm1026_read_value(new_client, ADM1026_REG_COMPANY);
+	verstep = adm1026_read_value(new_client, ADM1026_REG_VERSTEP);
+
+	dev_dbg(&new_client->dev, "Detecting device at %d,0x%02x with"
+		" COMPANY: 0x%02x and VERSTEP: 0x%02x\n",
+		i2c_adapter_id(new_client->adapter), new_client->addr,
+		company, verstep);
+
+	/* If auto-detecting, Determine the chip type. */
+	if (kind <= 0) {
+		dev_dbg(&new_client->dev, "Autodetecting device at %d,0x%02x "
+			"...\n", i2c_adapter_id(adapter), address);
+		if (company == ADM1026_COMPANY_ANALOG_DEV
+		    && verstep == ADM1026_VERSTEP_ADM1026) {
+			kind = adm1026;
+		} else if (company == ADM1026_COMPANY_ANALOG_DEV
+			&& (verstep & 0xf0) == ADM1026_VERSTEP_GENERIC) {
+			dev_err(&adapter->dev, ": Unrecognized stepping "
+				"0x%02x. Defaulting to ADM1026.\n", verstep);
+			kind = adm1026;
+		} else if ((verstep & 0xf0) == ADM1026_VERSTEP_GENERIC) {
+			dev_err(&adapter->dev, ": Found version/stepping "
+				"0x%02x. Assuming generic ADM1026.\n",
+				verstep);
+			kind = any_chip;
+		} else {
+			dev_dbg(&new_client->dev, ": Autodetection "
+				"failed\n");
+			/* Not an ADM1026 ... */
+			if (kind == 0)  { /* User used force=x,y */
+				dev_err(&adapter->dev, "Generic ADM1026 not "
+					"found at %d,0x%02x.  Try "
+					"force_adm1026.\n",
+					i2c_adapter_id(adapter), address);
+			}
+			err = 0;
+			goto exitfree;
+		}
+	}
+
+	/* Fill in the chip specific driver values */
+	switch (kind) {
+	case any_chip :
+		type_name = "adm1026";
+		break;
+	case adm1026 :
+		type_name = "adm1026";
+		break;
+	default :
+		dev_err(&adapter->dev, ": Internal error, invalid "
+			"kind (%d)!", kind);
+		err = -EFAULT;
+		goto exitfree;
+	}
+	strlcpy(new_client->name, type_name, I2C_NAME_SIZE);
+
+	/* Fill in the remaining client fields */
+	data->type = kind;
+	data->valid = 0;
+	init_MUTEX(&data->update_lock);
+
+	/* Tell the I2C layer a new client has arrived */
+	if ((err = i2c_attach_client(new_client)))
+		goto exitfree;
+
+	/* Set the VRM version */
+	data->vrm = i2c_which_vrm();
+
+	/* Initialize the ADM1026 chip */
+	adm1026_init_client(new_client);
+
+	/* Register sysfs hooks */
+	device_create_file(&new_client->dev, &dev_attr_in0_input);
+	device_create_file(&new_client->dev, &dev_attr_in0_max);
+	device_create_file(&new_client->dev, &dev_attr_in0_min);
+	device_create_file(&new_client->dev, &dev_attr_in1_input);
+	device_create_file(&new_client->dev, &dev_attr_in1_max);
+	device_create_file(&new_client->dev, &dev_attr_in1_min);
+	device_create_file(&new_client->dev, &dev_attr_in2_input);
+	device_create_file(&new_client->dev, &dev_attr_in2_max);
+	device_create_file(&new_client->dev, &dev_attr_in2_min);
+	device_create_file(&new_client->dev, &dev_attr_in3_input);
+	device_create_file(&new_client->dev, &dev_attr_in3_max);
+	device_create_file(&new_client->dev, &dev_attr_in3_min);
+	device_create_file(&new_client->dev, &dev_attr_in4_input);
+	device_create_file(&new_client->dev, &dev_attr_in4_max);
+	device_create_file(&new_client->dev, &dev_attr_in4_min);
+	device_create_file(&new_client->dev, &dev_attr_in5_input);
+	device_create_file(&new_client->dev, &dev_attr_in5_max);
+	device_create_file(&new_client->dev, &dev_attr_in5_min);
+	device_create_file(&new_client->dev, &dev_attr_in6_input);
+	device_create_file(&new_client->dev, &dev_attr_in6_max);
+	device_create_file(&new_client->dev, &dev_attr_in6_min);
+	device_create_file(&new_client->dev, &dev_attr_in7_input);
+	device_create_file(&new_client->dev, &dev_attr_in7_max);
+	device_create_file(&new_client->dev, &dev_attr_in7_min);
+	device_create_file(&new_client->dev, &dev_attr_in8_input);
+	device_create_file(&new_client->dev, &dev_attr_in8_max);
+	device_create_file(&new_client->dev, &dev_attr_in8_min);
+	device_create_file(&new_client->dev, &dev_attr_in9_input);
+	device_create_file(&new_client->dev, &dev_attr_in9_max);
+	device_create_file(&new_client->dev, &dev_attr_in9_min);
+	device_create_file(&new_client->dev, &dev_attr_in10_input);
+	device_create_file(&new_client->dev, &dev_attr_in10_max);
+	device_create_file(&new_client->dev, &dev_attr_in10_min);
+	device_create_file(&new_client->dev, &dev_attr_in11_input);
+	device_create_file(&new_client->dev, &dev_attr_in11_max);
+	device_create_file(&new_client->dev, &dev_attr_in11_min);
+	device_create_file(&new_client->dev, &dev_attr_in12_input);
+	device_create_file(&new_client->dev, &dev_attr_in12_max);
+	device_create_file(&new_client->dev, &dev_attr_in12_min);
+	device_create_file(&new_client->dev, &dev_attr_in13_input);
+	device_create_file(&new_client->dev, &dev_attr_in13_max);
+	device_create_file(&new_client->dev, &dev_attr_in13_min);
+	device_create_file(&new_client->dev, &dev_attr_in14_input);
+	device_create_file(&new_client->dev, &dev_attr_in14_max);
+	device_create_file(&new_client->dev, &dev_attr_in14_min);
+	device_create_file(&new_client->dev, &dev_attr_in15_input);
+	device_create_file(&new_client->dev, &dev_attr_in15_max);
+	device_create_file(&new_client->dev, &dev_attr_in15_min);
+	device_create_file(&new_client->dev, &dev_attr_in16_input);
+	device_create_file(&new_client->dev, &dev_attr_in16_max);
+	device_create_file(&new_client->dev, &dev_attr_in16_min);
+	device_create_file(&new_client->dev, &dev_attr_fan1_input);
+	device_create_file(&new_client->dev, &dev_attr_fan1_div);
+	device_create_file(&new_client->dev, &dev_attr_fan1_min);
+	device_create_file(&new_client->dev, &dev_attr_fan2_input);
+	device_create_file(&new_client->dev, &dev_attr_fan2_div);
+	device_create_file(&new_client->dev, &dev_attr_fan2_min);
+	device_create_file(&new_client->dev, &dev_attr_fan3_input);
+	device_create_file(&new_client->dev, &dev_attr_fan3_div);
+	device_create_file(&new_client->dev, &dev_attr_fan3_min);
+	device_create_file(&new_client->dev, &dev_attr_fan4_input);
+	device_create_file(&new_client->dev, &dev_attr_fan4_div);
+	device_create_file(&new_client->dev, &dev_attr_fan4_min);
+	device_create_file(&new_client->dev, &dev_attr_fan5_input);
+	device_create_file(&new_client->dev, &dev_attr_fan5_div);
+	device_create_file(&new_client->dev, &dev_attr_fan5_min);
+	device_create_file(&new_client->dev, &dev_attr_fan6_input);
+	device_create_file(&new_client->dev, &dev_attr_fan6_div);
+	device_create_file(&new_client->dev, &dev_attr_fan6_min);
+	device_create_file(&new_client->dev, &dev_attr_fan7_input);
+	device_create_file(&new_client->dev, &dev_attr_fan7_div);
+	device_create_file(&new_client->dev, &dev_attr_fan7_min);
+	device_create_file(&new_client->dev, &dev_attr_fan8_input);
+	device_create_file(&new_client->dev, &dev_attr_fan8_div);
+	device_create_file(&new_client->dev, &dev_attr_fan8_min);
+	device_create_file(&new_client->dev, &dev_attr_temp1_input);
+	device_create_file(&new_client->dev, &dev_attr_temp1_max);
+	device_create_file(&new_client->dev, &dev_attr_temp1_min);
+	device_create_file(&new_client->dev, &dev_attr_temp2_input);
+	device_create_file(&new_client->dev, &dev_attr_temp2_max);
+	device_create_file(&new_client->dev, &dev_attr_temp2_min);
+	device_create_file(&new_client->dev, &dev_attr_temp3_input);
+	device_create_file(&new_client->dev, &dev_attr_temp3_max);
+	device_create_file(&new_client->dev, &dev_attr_temp3_min);
+	device_create_file(&new_client->dev, &dev_attr_temp1_offset);
+	device_create_file(&new_client->dev, &dev_attr_temp2_offset);
+	device_create_file(&new_client->dev, &dev_attr_temp3_offset);
+	device_create_file(&new_client->dev, 
+		&dev_attr_temp1_auto_point1_temp);
+	device_create_file(&new_client->dev, 
+		&dev_attr_temp2_auto_point1_temp);
+	device_create_file(&new_client->dev, 
+		&dev_attr_temp3_auto_point1_temp);
+	device_create_file(&new_client->dev,
+		&dev_attr_temp1_auto_point1_temp_hyst);
+	device_create_file(&new_client->dev,
+		&dev_attr_temp2_auto_point1_temp_hyst);
+	device_create_file(&new_client->dev,
+		&dev_attr_temp3_auto_point1_temp_hyst);
+	device_create_file(&new_client->dev, 
+		&dev_attr_temp1_auto_point2_temp);
+	device_create_file(&new_client->dev, 
+		&dev_attr_temp2_auto_point2_temp);
+	device_create_file(&new_client->dev, 
+		&dev_attr_temp3_auto_point2_temp);
+	device_create_file(&new_client->dev, &dev_attr_temp1_crit);
+	device_create_file(&new_client->dev, &dev_attr_temp2_crit);
+	device_create_file(&new_client->dev, &dev_attr_temp3_crit);
+	device_create_file(&new_client->dev, &dev_attr_temp1_crit_enable);
+	device_create_file(&new_client->dev, &dev_attr_temp2_crit_enable);
+	device_create_file(&new_client->dev, &dev_attr_temp3_crit_enable);
+	device_create_file(&new_client->dev, &dev_attr_vid);
+	device_create_file(&new_client->dev, &dev_attr_vrm);
+	device_create_file(&new_client->dev, &dev_attr_alarms);
+	device_create_file(&new_client->dev, &dev_attr_alarm_mask);
+	device_create_file(&new_client->dev, &dev_attr_gpio);
+	device_create_file(&new_client->dev, &dev_attr_gpio_mask);
+	device_create_file(&new_client->dev, &dev_attr_pwm1);
+	device_create_file(&new_client->dev, &dev_attr_pwm2);
+	device_create_file(&new_client->dev, &dev_attr_pwm3);
+	device_create_file(&new_client->dev, &dev_attr_pwm1_enable);
+	device_create_file(&new_client->dev, &dev_attr_pwm2_enable);
+	device_create_file(&new_client->dev, &dev_attr_pwm3_enable);
+	device_create_file(&new_client->dev, &dev_attr_temp1_auto_point1_pwm);
+	device_create_file(&new_client->dev, &dev_attr_temp2_auto_point1_pwm);
+	device_create_file(&new_client->dev, &dev_attr_temp3_auto_point1_pwm);
+	device_create_file(&new_client->dev, &dev_attr_temp1_auto_point2_pwm);
+	device_create_file(&new_client->dev, &dev_attr_temp2_auto_point2_pwm);
+	device_create_file(&new_client->dev, &dev_attr_temp3_auto_point2_pwm);
+	device_create_file(&new_client->dev, &dev_attr_analog_out);
+	return 0;
+
+	/* Error out and cleanup code */
+exitfree:
+	kfree(new_client);
+exit:
+	return err;
+}
+static int __init sm_adm1026_init(void)
+{
+	return i2c_add_driver(&adm1026_driver);
+}
+
+static void  __exit sm_adm1026_exit(void)
+{
+	i2c_del_driver(&adm1026_driver);
+}
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Philip Pokorny <ppokorny@penguincomputing.com>, "
+              "Justin Thiessen <jthiessen@penguincomputing.com>");
+MODULE_DESCRIPTION("ADM1026 driver");
+
+module_init(sm_adm1026_init);
+module_exit(sm_adm1026_exit);
diff --git a/drivers/i2c/chips/adm1031.c b/drivers/i2c/chips/adm1031.c
new file mode 100644
index 00000000000..d4385a23f79
--- /dev/null
+++ b/drivers/i2c/chips/adm1031.c
@@ -0,0 +1,977 @@
+/*
+  adm1031.c - Part of lm_sensors, Linux kernel modules for hardware
+  monitoring
+  Based on lm75.c and lm85.c
+  Supports adm1030 / adm1031
+  Copyright (C) 2004 Alexandre d'Alton <alex@alexdalton.org>
+  Reworked by Jean Delvare <khali@linux-fr.org>
+  
+  This program is free software; you can redistribute it and/or modify
+  it under the terms of the GNU General Public License as published by
+  the Free Software Foundation; either version 2 of the License, or
+  (at your option) any later version.
+
+  This program is distributed in the hope that it will be useful,
+  but WITHOUT ANY WARRANTY; without even the implied warranty of
+  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+  GNU General Public License for more details.
+
+  You should have received a copy of the GNU General Public License
+  along with this program; if not, write to the Free Software
+  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/jiffies.h>
+#include <linux/i2c.h>
+#include <linux/i2c-sensor.h>
+
+/* Following macros takes channel parameter starting from 0 to 2 */
+#define ADM1031_REG_FAN_SPEED(nr)	(0x08 + (nr))
+#define ADM1031_REG_FAN_DIV(nr)		(0x20  + (nr))
+#define ADM1031_REG_PWM			(0x22)
+#define ADM1031_REG_FAN_MIN(nr)		(0x10 + (nr))
+
+#define ADM1031_REG_TEMP_MAX(nr)	(0x14  + 4*(nr))
+#define ADM1031_REG_TEMP_MIN(nr)	(0x15  + 4*(nr))
+#define ADM1031_REG_TEMP_CRIT(nr)	(0x16  + 4*(nr))
+
+#define ADM1031_REG_TEMP(nr)		(0xa + (nr))
+#define ADM1031_REG_AUTO_TEMP(nr)	(0x24 + (nr))
+
+#define ADM1031_REG_STATUS(nr)		(0x2 + (nr))
+
+#define ADM1031_REG_CONF1		0x0
+#define ADM1031_REG_CONF2		0x1
+#define ADM1031_REG_EXT_TEMP		0x6
+
+#define ADM1031_CONF1_MONITOR_ENABLE	0x01	/* Monitoring enable */
+#define ADM1031_CONF1_PWM_INVERT	0x08	/* PWM Invert */
+#define ADM1031_CONF1_AUTO_MODE		0x80	/* Auto FAN */
+
+#define ADM1031_CONF2_PWM1_ENABLE	0x01
+#define ADM1031_CONF2_PWM2_ENABLE	0x02
+#define ADM1031_CONF2_TACH1_ENABLE	0x04
+#define ADM1031_CONF2_TACH2_ENABLE	0x08
+#define ADM1031_CONF2_TEMP_ENABLE(chan)	(0x10 << (chan))
+
+/* Addresses to scan */
+static unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, I2C_CLIENT_END };
+static unsigned int normal_isa[] = { I2C_CLIENT_ISA_END };
+
+/* Insmod parameters */
+SENSORS_INSMOD_2(adm1030, adm1031);
+
+typedef u8 auto_chan_table_t[8][2];
+
+/* Each client has this additional data */
+struct adm1031_data {
+	struct i2c_client client;
+	struct semaphore update_lock;
+	int chip_type;
+	char valid;		/* !=0 if following fields are valid */
+	unsigned long last_updated;	/* In jiffies */
+	/* The chan_select_table contains the possible configurations for
+	 * auto fan control.
+	 */
+	auto_chan_table_t *chan_select_table;
+	u16 alarm;
+	u8 conf1;
+	u8 conf2;
+	u8 fan[2];
+	u8 fan_div[2];
+	u8 fan_min[2];
+	u8 pwm[2];
+	u8 old_pwm[2];
+	s8 temp[3];
+	u8 ext_temp[3];
+	u8 auto_temp[3];
+	u8 auto_temp_min[3];
+	u8 auto_temp_off[3];
+	u8 auto_temp_max[3];
+	s8 temp_min[3];
+	s8 temp_max[3];
+	s8 temp_crit[3];
+};
+
+static int adm1031_attach_adapter(struct i2c_adapter *adapter);
+static int adm1031_detect(struct i2c_adapter *adapter, int address, int kind);
+static void adm1031_init_client(struct i2c_client *client);
+static int adm1031_detach_client(struct i2c_client *client);
+static struct adm1031_data *adm1031_update_device(struct device *dev);
+
+/* This is the driver that will be inserted */
+static struct i2c_driver adm1031_driver = {
+	.owner = THIS_MODULE,
+	.name = "adm1031",
+	.flags = I2C_DF_NOTIFY,
+	.attach_adapter = adm1031_attach_adapter,
+	.detach_client = adm1031_detach_client,
+};
+
+static inline u8 adm1031_read_value(struct i2c_client *client, u8 reg)
+{
+	return i2c_smbus_read_byte_data(client, reg);
+}
+
+static inline int
+adm1031_write_value(struct i2c_client *client, u8 reg, unsigned int value)
+{
+	return i2c_smbus_write_byte_data(client, reg, value);
+}
+
+
+#define TEMP_TO_REG(val)		(((val) < 0 ? ((val - 500) / 1000) : \
+					((val + 500) / 1000)))
+
+#define TEMP_FROM_REG(val)		((val) * 1000)
+
+#define TEMP_FROM_REG_EXT(val, ext)	(TEMP_FROM_REG(val) + (ext) * 125)
+
+#define FAN_FROM_REG(reg, div)		((reg) ? (11250 * 60) / ((reg) * (div)) : 0)
+
+static int FAN_TO_REG(int reg, int div)
+{
+	int tmp;
+	tmp = FAN_FROM_REG(SENSORS_LIMIT(reg, 0, 65535), div);
+	return tmp > 255 ? 255 : tmp;
+}
+
+#define FAN_DIV_FROM_REG(reg)		(1<<(((reg)&0xc0)>>6))
+
+#define PWM_TO_REG(val)			(SENSORS_LIMIT((val), 0, 255) >> 4)
+#define PWM_FROM_REG(val)		((val) << 4)
+
+#define FAN_CHAN_FROM_REG(reg)		(((reg) >> 5) & 7)
+#define FAN_CHAN_TO_REG(val, reg)	\
+	(((reg) & 0x1F) | (((val) << 5) & 0xe0))
+
+#define AUTO_TEMP_MIN_TO_REG(val, reg)	\
+	((((val)/500) & 0xf8)|((reg) & 0x7))
+#define AUTO_TEMP_RANGE_FROM_REG(reg)	(5000 * (1<< ((reg)&0x7)))
+#define AUTO_TEMP_MIN_FROM_REG(reg)	(1000 * ((((reg) >> 3) & 0x1f) << 2))
+
+#define AUTO_TEMP_MIN_FROM_REG_DEG(reg)	((((reg) >> 3) & 0x1f) << 2)
+
+#define AUTO_TEMP_OFF_FROM_REG(reg)		\
+	(AUTO_TEMP_MIN_FROM_REG(reg) - 5000)
+
+#define AUTO_TEMP_MAX_FROM_REG(reg)		\
+	(AUTO_TEMP_RANGE_FROM_REG(reg) +	\
+	AUTO_TEMP_MIN_FROM_REG(reg))
+
+static int AUTO_TEMP_MAX_TO_REG(int val, int reg, int pwm)
+{
+	int ret;
+	int range = val - AUTO_TEMP_MIN_FROM_REG(reg);
+
+	range = ((val - AUTO_TEMP_MIN_FROM_REG(reg))*10)/(16 - pwm);
+	ret = ((reg & 0xf8) |
+	       (range < 10000 ? 0 :
+		range < 20000 ? 1 :
+		range < 40000 ? 2 : range < 80000 ? 3 : 4));
+	return ret;
+}
+
+/* FAN auto control */
+#define GET_FAN_AUTO_BITFIELD(data, idx)	\
+	(*(data)->chan_select_table)[FAN_CHAN_FROM_REG((data)->conf1)][idx%2]
+
+/* The tables below contains the possible values for the auto fan 
+ * control bitfields. the index in the table is the register value.
+ * MSb is the auto fan control enable bit, so the four first entries
+ * in the table disables auto fan control when both bitfields are zero.
+ */
+static auto_chan_table_t auto_channel_select_table_adm1031 = {
+	{0, 0}, {0, 0}, {0, 0}, {0, 0},
+	{2 /*0b010 */ , 4 /*0b100 */ },
+	{2 /*0b010 */ , 2 /*0b010 */ },
+	{4 /*0b100 */ , 4 /*0b100 */ },
+	{7 /*0b111 */ , 7 /*0b111 */ },
+};
+
+static auto_chan_table_t auto_channel_select_table_adm1030 = {
+	{0, 0}, {0, 0}, {0, 0}, {0, 0},
+	{2 /*0b10 */		, 0},
+	{0xff /*invalid */	, 0},
+	{0xff /*invalid */	, 0},
+	{3 /*0b11 */		, 0},
+};
+
+/* That function checks if a bitfield is valid and returns the other bitfield
+ * nearest match if no exact match where found.
+ */
+static int
+get_fan_auto_nearest(struct adm1031_data *data,
+		     int chan, u8 val, u8 reg, u8 * new_reg)
+{
+	int i;
+	int first_match = -1, exact_match = -1;
+	u8 other_reg_val =
+	    (*data->chan_select_table)[FAN_CHAN_FROM_REG(reg)][chan ? 0 : 1];
+
+	if (val == 0) {
+		*new_reg = 0;
+		return 0;
+	}
+
+	for (i = 0; i < 8; i++) {
+		if ((val == (*data->chan_select_table)[i][chan]) &&
+		    ((*data->chan_select_table)[i][chan ? 0 : 1] ==
+		     other_reg_val)) {
+			/* We found an exact match */
+			exact_match = i;
+			break;
+		} else if (val == (*data->chan_select_table)[i][chan] &&
+			   first_match == -1) {
+			/* Save the first match in case of an exact match has not been
+			 * found 
+			 */
+			first_match = i;
+		}
+	}
+
+	if (exact_match >= 0) {
+		*new_reg = exact_match;
+	} else if (first_match >= 0) {
+		*new_reg = first_match;
+	} else {
+		return -EINVAL;
+	}
+	return 0;
+}
+
+static ssize_t show_fan_auto_channel(struct device *dev, char *buf, int nr)
+{
+	struct adm1031_data *data = adm1031_update_device(dev);
+	return sprintf(buf, "%d\n", GET_FAN_AUTO_BITFIELD(data, nr));
+}
+
+static ssize_t
+set_fan_auto_channel(struct device *dev, const char *buf, size_t count, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct adm1031_data *data = i2c_get_clientdata(client);
+	int val = simple_strtol(buf, NULL, 10);
+	u8 reg;
+	int ret;
+	u8 old_fan_mode;
+
+	old_fan_mode = data->conf1;
+
+	down(&data->update_lock);
+	
+	if ((ret = get_fan_auto_nearest(data, nr, val, data->conf1, &reg))) {
+		up(&data->update_lock);
+		return ret;
+	}
+	if (((data->conf1 = FAN_CHAN_TO_REG(reg, data->conf1)) & ADM1031_CONF1_AUTO_MODE) ^ 
+	    (old_fan_mode & ADM1031_CONF1_AUTO_MODE)) {
+		if (data->conf1 & ADM1031_CONF1_AUTO_MODE){
+			/* Switch to Auto Fan Mode 
+			 * Save PWM registers 
+			 * Set PWM registers to 33% Both */
+			data->old_pwm[0] = data->pwm[0];
+			data->old_pwm[1] = data->pwm[1];
+			adm1031_write_value(client, ADM1031_REG_PWM, 0x55);
+		} else {
+			/* Switch to Manual Mode */
+			data->pwm[0] = data->old_pwm[0];
+			data->pwm[1] = data->old_pwm[1];
+			/* Restore PWM registers */
+			adm1031_write_value(client, ADM1031_REG_PWM, 
+					    data->pwm[0] | (data->pwm[1] << 4));
+		}
+	}
+	data->conf1 = FAN_CHAN_TO_REG(reg, data->conf1);
+	adm1031_write_value(client, ADM1031_REG_CONF1, data->conf1);
+	up(&data->update_lock);
+	return count;
+}
+
+#define fan_auto_channel_offset(offset)						\
+static ssize_t show_fan_auto_channel_##offset (struct device *dev, char *buf)	\
+{										\
+	return show_fan_auto_channel(dev, buf, offset - 1);			\
+}										\
+static ssize_t set_fan_auto_channel_##offset (struct device *dev,		\
+	const char *buf, size_t count)						\
+{										\
+	return set_fan_auto_channel(dev, buf, count, offset - 1);		\
+}										\
+static DEVICE_ATTR(auto_fan##offset##_channel, S_IRUGO | S_IWUSR,		\
+		   show_fan_auto_channel_##offset,				\
+		   set_fan_auto_channel_##offset)
+
+fan_auto_channel_offset(1);
+fan_auto_channel_offset(2);
+
+/* Auto Temps */
+static ssize_t show_auto_temp_off(struct device *dev, char *buf, int nr)
+{
+	struct adm1031_data *data = adm1031_update_device(dev);
+	return sprintf(buf, "%d\n", 
+		       AUTO_TEMP_OFF_FROM_REG(data->auto_temp[nr]));
+}
+static ssize_t show_auto_temp_min(struct device *dev, char *buf, int nr)
+{
+	struct adm1031_data *data = adm1031_update_device(dev);
+	return sprintf(buf, "%d\n",
+		       AUTO_TEMP_MIN_FROM_REG(data->auto_temp[nr]));
+}
+static ssize_t
+set_auto_temp_min(struct device *dev, const char *buf, size_t count, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct adm1031_data *data = i2c_get_clientdata(client);
+	int val = simple_strtol(buf, NULL, 10);
+
+	down(&data->update_lock);
+	data->auto_temp[nr] = AUTO_TEMP_MIN_TO_REG(val, data->auto_temp[nr]);
+	adm1031_write_value(client, ADM1031_REG_AUTO_TEMP(nr),
+			    data->auto_temp[nr]);
+	up(&data->update_lock);
+	return count;
+}
+static ssize_t show_auto_temp_max(struct device *dev, char *buf, int nr)
+{
+	struct adm1031_data *data = adm1031_update_device(dev);
+	return sprintf(buf, "%d\n",
+		       AUTO_TEMP_MAX_FROM_REG(data->auto_temp[nr]));
+}
+static ssize_t
+set_auto_temp_max(struct device *dev, const char *buf, size_t count, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct adm1031_data *data = i2c_get_clientdata(client);
+	int val = simple_strtol(buf, NULL, 10);
+
+	down(&data->update_lock);
+	data->temp_max[nr] = AUTO_TEMP_MAX_TO_REG(val, data->auto_temp[nr], data->pwm[nr]);
+	adm1031_write_value(client, ADM1031_REG_AUTO_TEMP(nr),
+			    data->temp_max[nr]);
+	up(&data->update_lock);
+	return count;
+}
+
+#define auto_temp_reg(offset)							\
+static ssize_t show_auto_temp_##offset##_off (struct device *dev, char *buf)	\
+{										\
+	return show_auto_temp_off(dev, buf, offset - 1);			\
+}										\
+static ssize_t show_auto_temp_##offset##_min (struct device *dev, char *buf)	\
+{										\
+	return show_auto_temp_min(dev, buf, offset - 1);			\
+}										\
+static ssize_t show_auto_temp_##offset##_max (struct device *dev, char *buf)	\
+{										\
+	return show_auto_temp_max(dev, buf, offset - 1);			\
+}										\
+static ssize_t set_auto_temp_##offset##_min (struct device *dev,		\
+					     const char *buf, size_t count)	\
+{										\
+	return set_auto_temp_min(dev, buf, count, offset - 1);		\
+}										\
+static ssize_t set_auto_temp_##offset##_max (struct device *dev,		\
+					     const char *buf, size_t count)	\
+{										\
+	return set_auto_temp_max(dev, buf, count, offset - 1);		\
+}										\
+static DEVICE_ATTR(auto_temp##offset##_off, S_IRUGO,				\
+		   show_auto_temp_##offset##_off, NULL);			\
+static DEVICE_ATTR(auto_temp##offset##_min, S_IRUGO | S_IWUSR,			\
+		   show_auto_temp_##offset##_min, set_auto_temp_##offset##_min);\
+static DEVICE_ATTR(auto_temp##offset##_max, S_IRUGO | S_IWUSR,			\
+		   show_auto_temp_##offset##_max, set_auto_temp_##offset##_max)
+
+auto_temp_reg(1);
+auto_temp_reg(2);
+auto_temp_reg(3);
+
+/* pwm */
+static ssize_t show_pwm(struct device *dev, char *buf, int nr)
+{
+	struct adm1031_data *data = adm1031_update_device(dev);
+	return sprintf(buf, "%d\n", PWM_FROM_REG(data->pwm[nr]));
+}
+static ssize_t
+set_pwm(struct device *dev, const char *buf, size_t count, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct adm1031_data *data = i2c_get_clientdata(client);
+	int val = simple_strtol(buf, NULL, 10);
+	int reg;
+
+	down(&data->update_lock);
+	if ((data->conf1 & ADM1031_CONF1_AUTO_MODE) && 
+	    (((val>>4) & 0xf) != 5)) {
+		/* In automatic mode, the only PWM accepted is 33% */
+		up(&data->update_lock);
+		return -EINVAL;
+	}
+	data->pwm[nr] = PWM_TO_REG(val);
+	reg = adm1031_read_value(client, ADM1031_REG_PWM);
+	adm1031_write_value(client, ADM1031_REG_PWM,
+			    nr ? ((data->pwm[nr] << 4) & 0xf0) | (reg & 0xf)
+			    : (data->pwm[nr] & 0xf) | (reg & 0xf0));
+	up(&data->update_lock);
+	return count;
+}
+
+#define pwm_reg(offset)							\
+static ssize_t show_pwm_##offset (struct device *dev, char *buf)	\
+{									\
+	return show_pwm(dev, buf, offset - 1);			\
+}									\
+static ssize_t set_pwm_##offset (struct device *dev,			\
+				 const char *buf, size_t count)		\
+{									\
+	return set_pwm(dev, buf, count, offset - 1);		\
+}									\
+static DEVICE_ATTR(pwm##offset, S_IRUGO | S_IWUSR,			\
+		   show_pwm_##offset, set_pwm_##offset)
+
+pwm_reg(1);
+pwm_reg(2);
+
+/* Fans */
+
+/*
+ * That function checks the cases where the fan reading is not
+ * relevent.  It is used to provide 0 as fan reading when the fan is
+ * not supposed to run
+ */
+static int trust_fan_readings(struct adm1031_data *data, int chan)
+{
+	int res = 0;
+
+	if (data->conf1 & ADM1031_CONF1_AUTO_MODE) {
+		switch (data->conf1 & 0x60) {
+		case 0x00:	/* remote temp1 controls fan1 remote temp2 controls fan2 */
+			res = data->temp[chan+1] >=
+			      AUTO_TEMP_MIN_FROM_REG_DEG(data->auto_temp[chan+1]);
+			break;
+		case 0x20:	/* remote temp1 controls both fans */
+			res =
+			    data->temp[1] >=
+			    AUTO_TEMP_MIN_FROM_REG_DEG(data->auto_temp[1]);
+			break;
+		case 0x40:	/* remote temp2 controls both fans */
+			res =
+			    data->temp[2] >=
+			    AUTO_TEMP_MIN_FROM_REG_DEG(data->auto_temp[2]);
+			break;
+		case 0x60:	/* max controls both fans */
+			res =
+			    data->temp[0] >=
+			    AUTO_TEMP_MIN_FROM_REG_DEG(data->auto_temp[0])
+			    || data->temp[1] >=
+			    AUTO_TEMP_MIN_FROM_REG_DEG(data->auto_temp[1])
+			    || (data->chip_type == adm1031 
+				&& data->temp[2] >=
+				AUTO_TEMP_MIN_FROM_REG_DEG(data->auto_temp[2]));
+			break;
+		}
+	} else {
+		res = data->pwm[chan] > 0;
+	}
+	return res;
+}
+
+
+static ssize_t show_fan(struct device *dev, char *buf, int nr)
+{
+	struct adm1031_data *data = adm1031_update_device(dev);
+	int value;
+
+	value = trust_fan_readings(data, nr) ? FAN_FROM_REG(data->fan[nr],
+				 FAN_DIV_FROM_REG(data->fan_div[nr])) : 0;
+	return sprintf(buf, "%d\n", value);
+}
+
+static ssize_t show_fan_div(struct device *dev, char *buf, int nr)
+{
+	struct adm1031_data *data = adm1031_update_device(dev);
+	return sprintf(buf, "%d\n", FAN_DIV_FROM_REG(data->fan_div[nr]));
+}
+static ssize_t show_fan_min(struct device *dev, char *buf, int nr)
+{
+	struct adm1031_data *data = adm1031_update_device(dev);
+	return sprintf(buf, "%d\n",
+		       FAN_FROM_REG(data->fan_min[nr],
+				    FAN_DIV_FROM_REG(data->fan_div[nr])));
+}
+static ssize_t
+set_fan_min(struct device *dev, const char *buf, size_t count, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct adm1031_data *data = i2c_get_clientdata(client);
+	int val = simple_strtol(buf, NULL, 10);
+
+	down(&data->update_lock);
+	if (val) {
+		data->fan_min[nr] = 
+			FAN_TO_REG(val, FAN_DIV_FROM_REG(data->fan_div[nr]));
+	} else {
+		data->fan_min[nr] = 0xff;
+	}
+	adm1031_write_value(client, ADM1031_REG_FAN_MIN(nr), data->fan_min[nr]);
+	up(&data->update_lock);
+	return count;
+}
+static ssize_t
+set_fan_div(struct device *dev, const char *buf, size_t count, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct adm1031_data *data = i2c_get_clientdata(client);
+	int val = simple_strtol(buf, NULL, 10);
+	u8 tmp;
+	int old_div;
+	int new_min;
+
+	tmp = val == 8 ? 0xc0 :
+	      val == 4 ? 0x80 :
+	      val == 2 ? 0x40 :	
+	      val == 1 ? 0x00 :  
+	      0xff;
+	if (tmp == 0xff)
+		return -EINVAL;
+	
+	down(&data->update_lock);
+	old_div = FAN_DIV_FROM_REG(data->fan_div[nr]);
+	data->fan_div[nr] = (tmp & 0xC0) | (0x3f & data->fan_div[nr]);
+	new_min = data->fan_min[nr] * old_div / 
+		FAN_DIV_FROM_REG(data->fan_div[nr]);
+	data->fan_min[nr] = new_min > 0xff ? 0xff : new_min;
+	data->fan[nr] = data->fan[nr] * old_div / 
+		FAN_DIV_FROM_REG(data->fan_div[nr]);
+
+	adm1031_write_value(client, ADM1031_REG_FAN_DIV(nr), 
+			    data->fan_div[nr]);
+	adm1031_write_value(client, ADM1031_REG_FAN_MIN(nr), 
+			    data->fan_min[nr]);
+	up(&data->update_lock);
+	return count;
+}
+
+#define fan_offset(offset)						\
+static ssize_t show_fan_##offset (struct device *dev, char *buf)	\
+{									\
+	return show_fan(dev, buf, offset - 1);			\
+}									\
+static ssize_t show_fan_##offset##_min (struct device *dev, char *buf)	\
+{									\
+	return show_fan_min(dev, buf, offset - 1);			\
+}									\
+static ssize_t show_fan_##offset##_div (struct device *dev, char *buf)	\
+{									\
+	return show_fan_div(dev, buf, offset - 1);			\
+}									\
+static ssize_t set_fan_##offset##_min (struct device *dev,		\
+	const char *buf, size_t count)					\
+{									\
+	return set_fan_min(dev, buf, count, offset - 1);		\
+}									\
+static ssize_t set_fan_##offset##_div (struct device *dev,		\
+	const char *buf, size_t count)					\
+{									\
+	return set_fan_div(dev, buf, count, offset - 1);		\
+}									\
+static DEVICE_ATTR(fan##offset##_input, S_IRUGO, show_fan_##offset,	\
+		   NULL);						\
+static DEVICE_ATTR(fan##offset##_min, S_IRUGO | S_IWUSR,		\
+		   show_fan_##offset##_min, set_fan_##offset##_min);	\
+static DEVICE_ATTR(fan##offset##_div, S_IRUGO | S_IWUSR,		\
+		   show_fan_##offset##_div, set_fan_##offset##_div);	\
+static DEVICE_ATTR(auto_fan##offset##_min_pwm, S_IRUGO | S_IWUSR,	\
+		   show_pwm_##offset, set_pwm_##offset)
+
+fan_offset(1);
+fan_offset(2);
+
+
+/* Temps */
+static ssize_t show_temp(struct device *dev, char *buf, int nr)
+{
+	struct adm1031_data *data = adm1031_update_device(dev);
+	int ext;
+	ext = nr == 0 ?
+	    ((data->ext_temp[nr] >> 6) & 0x3) * 2 :
+	    (((data->ext_temp[nr] >> ((nr - 1) * 3)) & 7));
+	return sprintf(buf, "%d\n", TEMP_FROM_REG_EXT(data->temp[nr], ext));
+}
+static ssize_t show_temp_min(struct device *dev, char *buf, int nr)
+{
+	struct adm1031_data *data = adm1031_update_device(dev);
+	return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_min[nr]));
+}
+static ssize_t show_temp_max(struct device *dev, char *buf, int nr)
+{
+	struct adm1031_data *data = adm1031_update_device(dev);
+	return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_max[nr]));
+}
+static ssize_t show_temp_crit(struct device *dev, char *buf, int nr)
+{
+	struct adm1031_data *data = adm1031_update_device(dev);
+	return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_crit[nr]));
+}
+static ssize_t
+set_temp_min(struct device *dev, const char *buf, size_t count, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct adm1031_data *data = i2c_get_clientdata(client);
+	int val;
+
+	val = simple_strtol(buf, NULL, 10);
+	val = SENSORS_LIMIT(val, -55000, nr == 0 ? 127750 : 127875);
+	down(&data->update_lock);
+	data->temp_min[nr] = TEMP_TO_REG(val);
+	adm1031_write_value(client, ADM1031_REG_TEMP_MIN(nr),
+			    data->temp_min[nr]);
+	up(&data->update_lock);
+	return count;
+}
+static ssize_t
+set_temp_max(struct device *dev, const char *buf, size_t count, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct adm1031_data *data = i2c_get_clientdata(client);
+	int val;
+
+	val = simple_strtol(buf, NULL, 10);
+	val = SENSORS_LIMIT(val, -55000, nr == 0 ? 127750 : 127875);
+	down(&data->update_lock);
+	data->temp_max[nr] = TEMP_TO_REG(val);
+	adm1031_write_value(client, ADM1031_REG_TEMP_MAX(nr),
+			    data->temp_max[nr]);
+	up(&data->update_lock);
+	return count;
+}
+static ssize_t
+set_temp_crit(struct device *dev, const char *buf, size_t count, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct adm1031_data *data = i2c_get_clientdata(client);
+	int val;
+
+	val = simple_strtol(buf, NULL, 10);
+	val = SENSORS_LIMIT(val, -55000, nr == 0 ? 127750 : 127875);
+	down(&data->update_lock);
+	data->temp_crit[nr] = TEMP_TO_REG(val);
+	adm1031_write_value(client, ADM1031_REG_TEMP_CRIT(nr),
+			    data->temp_crit[nr]);
+	up(&data->update_lock);
+	return count;
+}
+
+#define temp_reg(offset)							\
+static ssize_t show_temp_##offset (struct device *dev, char *buf)		\
+{										\
+	return show_temp(dev, buf, offset - 1);				\
+}										\
+static ssize_t show_temp_##offset##_min (struct device *dev, char *buf)		\
+{										\
+	return show_temp_min(dev, buf, offset - 1);				\
+}										\
+static ssize_t show_temp_##offset##_max (struct device *dev, char *buf)		\
+{										\
+	return show_temp_max(dev, buf, offset - 1);				\
+}										\
+static ssize_t show_temp_##offset##_crit (struct device *dev, char *buf)	\
+{										\
+	return show_temp_crit(dev, buf, offset - 1);			\
+}										\
+static ssize_t set_temp_##offset##_min (struct device *dev,			\
+					const char *buf, size_t count)		\
+{										\
+	return set_temp_min(dev, buf, count, offset - 1);			\
+}										\
+static ssize_t set_temp_##offset##_max (struct device *dev,			\
+					const char *buf, size_t count)		\
+{										\
+	return set_temp_max(dev, buf, count, offset - 1);			\
+}										\
+static ssize_t set_temp_##offset##_crit (struct device *dev,			\
+					 const char *buf, size_t count)		\
+{										\
+	return set_temp_crit(dev, buf, count, offset - 1);			\
+}										\
+static DEVICE_ATTR(temp##offset##_input, S_IRUGO, show_temp_##offset,		\
+		   NULL);							\
+static DEVICE_ATTR(temp##offset##_min, S_IRUGO | S_IWUSR,			\
+		   show_temp_##offset##_min, set_temp_##offset##_min);		\
+static DEVICE_ATTR(temp##offset##_max, S_IRUGO | S_IWUSR,			\
+		   show_temp_##offset##_max, set_temp_##offset##_max);		\
+static DEVICE_ATTR(temp##offset##_crit, S_IRUGO | S_IWUSR,			\
+		   show_temp_##offset##_crit, set_temp_##offset##_crit)
+
+temp_reg(1);
+temp_reg(2);
+temp_reg(3);
+
+/* Alarms */
+static ssize_t show_alarms(struct device *dev, char *buf)
+{
+	struct adm1031_data *data = adm1031_update_device(dev);
+	return sprintf(buf, "%d\n", data->alarm);
+}
+
+static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL);
+
+
+static int adm1031_attach_adapter(struct i2c_adapter *adapter)
+{
+	if (!(adapter->class & I2C_CLASS_HWMON))
+		return 0;
+	return i2c_detect(adapter, &addr_data, adm1031_detect);
+}
+
+/* This function is called by i2c_detect */
+static int adm1031_detect(struct i2c_adapter *adapter, int address, int kind)
+{
+	struct i2c_client *new_client;
+	struct adm1031_data *data;
+	int err = 0;
+	const char *name = "";
+
+	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
+		goto exit;
+
+	if (!(data = kmalloc(sizeof(struct adm1031_data), GFP_KERNEL))) {
+		err = -ENOMEM;
+		goto exit;
+	}
+	memset(data, 0, sizeof(struct adm1031_data));
+
+	new_client = &data->client;
+	i2c_set_clientdata(new_client, data);
+	new_client->addr = address;
+	new_client->adapter = adapter;
+	new_client->driver = &adm1031_driver;
+	new_client->flags = 0;
+
+	if (kind < 0) {
+		int id, co;
+		id = i2c_smbus_read_byte_data(new_client, 0x3d);
+		co = i2c_smbus_read_byte_data(new_client, 0x3e);
+
+		if (!((id == 0x31 || id == 0x30) && co == 0x41))
+			goto exit_free;
+		kind = (id == 0x30) ? adm1030 : adm1031;
+	}
+
+	if (kind <= 0)
+		kind = adm1031;
+
+	/* Given the detected chip type, set the chip name and the
+	 * auto fan control helper table. */
+	if (kind == adm1030) {
+		name = "adm1030";
+		data->chan_select_table = &auto_channel_select_table_adm1030;
+	} else if (kind == adm1031) {
+		name = "adm1031";
+		data->chan_select_table = &auto_channel_select_table_adm1031;
+	}
+	data->chip_type = kind;
+
+	strlcpy(new_client->name, name, I2C_NAME_SIZE);
+	data->valid = 0;
+	init_MUTEX(&data->update_lock);
+
+	/* Tell the I2C layer a new client has arrived */
+	if ((err = i2c_attach_client(new_client)))
+		goto exit_free;
+
+	/* Initialize the ADM1031 chip */
+	adm1031_init_client(new_client);
+
+	/* Register sysfs hooks */
+	device_create_file(&new_client->dev, &dev_attr_fan1_input);
+	device_create_file(&new_client->dev, &dev_attr_fan1_div);
+	device_create_file(&new_client->dev, &dev_attr_fan1_min);
+	device_create_file(&new_client->dev, &dev_attr_pwm1);
+	device_create_file(&new_client->dev, &dev_attr_auto_fan1_channel);
+	device_create_file(&new_client->dev, &dev_attr_temp1_input);
+	device_create_file(&new_client->dev, &dev_attr_temp1_min);
+	device_create_file(&new_client->dev, &dev_attr_temp1_max);
+	device_create_file(&new_client->dev, &dev_attr_temp1_crit);
+	device_create_file(&new_client->dev, &dev_attr_temp2_input);
+	device_create_file(&new_client->dev, &dev_attr_temp2_min);
+	device_create_file(&new_client->dev, &dev_attr_temp2_max);
+	device_create_file(&new_client->dev, &dev_attr_temp2_crit);
+
+	device_create_file(&new_client->dev, &dev_attr_auto_temp1_off);
+	device_create_file(&new_client->dev, &dev_attr_auto_temp1_min);
+	device_create_file(&new_client->dev, &dev_attr_auto_temp1_max);
+
+	device_create_file(&new_client->dev, &dev_attr_auto_temp2_off);
+	device_create_file(&new_client->dev, &dev_attr_auto_temp2_min);
+	device_create_file(&new_client->dev, &dev_attr_auto_temp2_max);
+
+	device_create_file(&new_client->dev, &dev_attr_auto_fan1_min_pwm);
+
+	device_create_file(&new_client->dev, &dev_attr_alarms);
+
+	if (kind == adm1031) {
+		device_create_file(&new_client->dev, &dev_attr_fan2_input);
+		device_create_file(&new_client->dev, &dev_attr_fan2_div);
+		device_create_file(&new_client->dev, &dev_attr_fan2_min);
+		device_create_file(&new_client->dev, &dev_attr_pwm2);
+		device_create_file(&new_client->dev,
+				   &dev_attr_auto_fan2_channel);
+		device_create_file(&new_client->dev, &dev_attr_temp3_input);
+		device_create_file(&new_client->dev, &dev_attr_temp3_min);
+		device_create_file(&new_client->dev, &dev_attr_temp3_max);
+		device_create_file(&new_client->dev, &dev_attr_temp3_crit);
+		device_create_file(&new_client->dev, &dev_attr_auto_temp3_off);
+		device_create_file(&new_client->dev, &dev_attr_auto_temp3_min);
+		device_create_file(&new_client->dev, &dev_attr_auto_temp3_max);
+		device_create_file(&new_client->dev, &dev_attr_auto_fan2_min_pwm);
+	}
+
+	return 0;
+
+exit_free:
+	kfree(new_client);
+exit:
+	return err;
+}
+
+static int adm1031_detach_client(struct i2c_client *client)
+{
+	int ret;
+	if ((ret = i2c_detach_client(client)) != 0) {
+		return ret;
+	}
+	kfree(client);
+	return 0;
+}
+
+static void adm1031_init_client(struct i2c_client *client)
+{
+	unsigned int read_val;
+	unsigned int mask;
+	struct adm1031_data *data = i2c_get_clientdata(client);
+
+	mask = (ADM1031_CONF2_PWM1_ENABLE | ADM1031_CONF2_TACH1_ENABLE);
+	if (data->chip_type == adm1031) {
+		mask |= (ADM1031_CONF2_PWM2_ENABLE |
+			ADM1031_CONF2_TACH2_ENABLE);
+	} 
+	/* Initialize the ADM1031 chip (enables fan speed reading ) */
+	read_val = adm1031_read_value(client, ADM1031_REG_CONF2);
+	if ((read_val | mask) != read_val) {
+	    adm1031_write_value(client, ADM1031_REG_CONF2, read_val | mask);
+	}
+
+	read_val = adm1031_read_value(client, ADM1031_REG_CONF1);
+	if ((read_val | ADM1031_CONF1_MONITOR_ENABLE) != read_val) {
+	    adm1031_write_value(client, ADM1031_REG_CONF1, read_val |
+				ADM1031_CONF1_MONITOR_ENABLE);
+	}
+
+}
+
+static struct adm1031_data *adm1031_update_device(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct adm1031_data *data = i2c_get_clientdata(client);
+	int chan;
+
+	down(&data->update_lock);
+
+	if (time_after(jiffies, data->last_updated + HZ + HZ / 2)
+	    || !data->valid) {
+
+		dev_dbg(&client->dev, "Starting adm1031 update\n");
+		for (chan = 0;
+		     chan < ((data->chip_type == adm1031) ? 3 : 2); chan++) {
+			u8 oldh, newh;
+
+			oldh =
+			    adm1031_read_value(client, ADM1031_REG_TEMP(chan));
+			data->ext_temp[chan] =
+			    adm1031_read_value(client, ADM1031_REG_EXT_TEMP);
+			newh =
+			    adm1031_read_value(client, ADM1031_REG_TEMP(chan));
+			if (newh != oldh) {
+				data->ext_temp[chan] =
+				    adm1031_read_value(client,
+						       ADM1031_REG_EXT_TEMP);
+#ifdef DEBUG
+				oldh =
+				    adm1031_read_value(client,
+						       ADM1031_REG_TEMP(chan));
+
+				/* oldh is actually newer */
+				if (newh != oldh)
+					dev_warn(&client->dev,
+						 "Remote temperature may be "
+						 "wrong.\n");
+#endif
+			}
+			data->temp[chan] = newh;
+
+			data->temp_min[chan] =
+			    adm1031_read_value(client,
+					       ADM1031_REG_TEMP_MIN(chan));
+			data->temp_max[chan] =
+			    adm1031_read_value(client,
+					       ADM1031_REG_TEMP_MAX(chan));
+			data->temp_crit[chan] =
+			    adm1031_read_value(client,
+					       ADM1031_REG_TEMP_CRIT(chan));
+			data->auto_temp[chan] =
+			    adm1031_read_value(client,
+					       ADM1031_REG_AUTO_TEMP(chan));
+
+		}
+
+		data->conf1 = adm1031_read_value(client, ADM1031_REG_CONF1);
+		data->conf2 = adm1031_read_value(client, ADM1031_REG_CONF2);
+
+		data->alarm = adm1031_read_value(client, ADM1031_REG_STATUS(0))
+			     | (adm1031_read_value(client, ADM1031_REG_STATUS(1))
+				<< 8);
+		if (data->chip_type == adm1030) {
+			data->alarm &= 0xc0ff;
+		}
+		
+		for (chan=0; chan<(data->chip_type == adm1030 ? 1 : 2); chan++) {
+			data->fan_div[chan] =
+			    adm1031_read_value(client, ADM1031_REG_FAN_DIV(chan));
+			data->fan_min[chan] =
+			    adm1031_read_value(client, ADM1031_REG_FAN_MIN(chan));
+			data->fan[chan] =
+			    adm1031_read_value(client, ADM1031_REG_FAN_SPEED(chan));
+			data->pwm[chan] =
+			    0xf & (adm1031_read_value(client, ADM1031_REG_PWM) >> 
+				   (4*chan));
+		}
+		data->last_updated = jiffies;
+		data->valid = 1;
+	}
+
+	up(&data->update_lock);
+
+	return data;
+}
+
+static int __init sensors_adm1031_init(void)
+{
+	return i2c_add_driver(&adm1031_driver);
+}
+
+static void __exit sensors_adm1031_exit(void)
+{
+	i2c_del_driver(&adm1031_driver);
+}
+
+MODULE_AUTHOR("Alexandre d'Alton <alex@alexdalton.org>");
+MODULE_DESCRIPTION("ADM1031/ADM1030 driver");
+MODULE_LICENSE("GPL");
+
+module_init(sensors_adm1031_init);
+module_exit(sensors_adm1031_exit);
diff --git a/drivers/i2c/chips/asb100.c b/drivers/i2c/chips/asb100.c
new file mode 100644
index 00000000000..7f899002bc5
--- /dev/null
+++ b/drivers/i2c/chips/asb100.c
@@ -0,0 +1,1066 @@
+/*
+    asb100.c - Part of lm_sensors, Linux kernel modules for hardware
+	        monitoring
+
+    Copyright (C) 2004 Mark M. Hoffman <mhoffman@lightlink.com>
+
+	(derived from w83781d.c)
+
+    Copyright (C) 1998 - 2003  Frodo Looijaard <frodol@dds.nl>,
+    Philip Edelbrock <phil@netroedge.com>, and
+    Mark Studebaker <mdsxyz123@yahoo.com>
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+/*
+    This driver supports the hardware sensor chips: Asus ASB100 and
+    ASB100-A "BACH".
+
+    ASB100-A supports pwm1, while plain ASB100 does not.  There is no known
+    way for the driver to tell which one is there.
+
+    Chip	#vin	#fanin	#pwm	#temp	wchipid	vendid	i2c	ISA
+    asb100	7	3	1	4	0x31	0x0694	yes	no
+*/
+
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/i2c-sensor.h>
+#include <linux/i2c-vid.h>
+#include <linux/init.h>
+#include "lm75.h"
+
+/*
+	HISTORY:
+	2003-12-29	1.0.0	Ported from lm_sensors project for kernel 2.6
+*/
+#define ASB100_VERSION "1.0.0"
+
+/* I2C addresses to scan */
+static unsigned short normal_i2c[] = { 0x2d, I2C_CLIENT_END };
+
+/* ISA addresses to scan (none) */
+static unsigned int normal_isa[] = { I2C_CLIENT_ISA_END };
+
+/* Insmod parameters */
+SENSORS_INSMOD_1(asb100);
+I2C_CLIENT_MODULE_PARM(force_subclients, "List of subclient addresses: "
+	"{bus, clientaddr, subclientaddr1, subclientaddr2}");
+
+/* Voltage IN registers 0-6 */
+#define ASB100_REG_IN(nr)	(0x20 + (nr))
+#define ASB100_REG_IN_MAX(nr)	(0x2b + (nr * 2))
+#define ASB100_REG_IN_MIN(nr)	(0x2c + (nr * 2))
+
+/* FAN IN registers 1-3 */
+#define ASB100_REG_FAN(nr)	(0x28 + (nr))
+#define ASB100_REG_FAN_MIN(nr)	(0x3b + (nr))
+
+/* TEMPERATURE registers 1-4 */
+static const u16 asb100_reg_temp[]	= {0, 0x27, 0x150, 0x250, 0x17};
+static const u16 asb100_reg_temp_max[]	= {0, 0x39, 0x155, 0x255, 0x18};
+static const u16 asb100_reg_temp_hyst[]	= {0, 0x3a, 0x153, 0x253, 0x19};
+
+#define ASB100_REG_TEMP(nr) (asb100_reg_temp[nr])
+#define ASB100_REG_TEMP_MAX(nr) (asb100_reg_temp_max[nr])
+#define ASB100_REG_TEMP_HYST(nr) (asb100_reg_temp_hyst[nr])
+
+#define ASB100_REG_TEMP2_CONFIG	0x0152
+#define ASB100_REG_TEMP3_CONFIG	0x0252
+
+
+#define ASB100_REG_CONFIG	0x40
+#define ASB100_REG_ALARM1	0x41
+#define ASB100_REG_ALARM2	0x42
+#define ASB100_REG_SMIM1	0x43
+#define ASB100_REG_SMIM2	0x44
+#define ASB100_REG_VID_FANDIV	0x47
+#define ASB100_REG_I2C_ADDR	0x48
+#define ASB100_REG_CHIPID	0x49
+#define ASB100_REG_I2C_SUBADDR	0x4a
+#define ASB100_REG_PIN		0x4b
+#define ASB100_REG_IRQ		0x4c
+#define ASB100_REG_BANK		0x4e
+#define ASB100_REG_CHIPMAN	0x4f
+
+#define ASB100_REG_WCHIPID	0x58
+
+/* bit 7 -> enable, bits 0-3 -> duty cycle */
+#define ASB100_REG_PWM1		0x59
+
+/* CONVERSIONS
+   Rounding and limit checking is only done on the TO_REG variants. */
+
+/* These constants are a guess, consistent w/ w83781d */
+#define ASB100_IN_MIN (   0)
+#define ASB100_IN_MAX (4080)
+
+/* IN: 1/1000 V (0V to 4.08V)
+   REG: 16mV/bit */
+static u8 IN_TO_REG(unsigned val)
+{
+	unsigned nval = SENSORS_LIMIT(val, ASB100_IN_MIN, ASB100_IN_MAX);
+	return (nval + 8) / 16;
+}
+
+static unsigned IN_FROM_REG(u8 reg)
+{
+	return reg * 16;
+}
+
+static u8 FAN_TO_REG(long rpm, int div)
+{
+	if (rpm == -1)
+		return 0;
+	if (rpm == 0)
+		return 255;
+	rpm = SENSORS_LIMIT(rpm, 1, 1000000);
+	return SENSORS_LIMIT((1350000 + rpm * div / 2) / (rpm * div), 1, 254);
+}
+
+static int FAN_FROM_REG(u8 val, int div)
+{
+	return val==0 ? -1 : val==255 ? 0 : 1350000/(val*div);
+}
+
+/* These constants are a guess, consistent w/ w83781d */
+#define ASB100_TEMP_MIN (-128000)
+#define ASB100_TEMP_MAX ( 127000)
+
+/* TEMP: 0.001C/bit (-128C to +127C)
+   REG: 1C/bit, two's complement */
+static u8 TEMP_TO_REG(int temp)
+{
+	int ntemp = SENSORS_LIMIT(temp, ASB100_TEMP_MIN, ASB100_TEMP_MAX);
+	ntemp += (ntemp<0 ? -500 : 500);
+	return (u8)(ntemp / 1000);
+}
+
+static int TEMP_FROM_REG(u8 reg)
+{
+	return (s8)reg * 1000;
+}
+
+/* PWM: 0 - 255 per sensors documentation
+   REG: (6.25% duty cycle per bit) */
+static u8 ASB100_PWM_TO_REG(int pwm)
+{
+	pwm = SENSORS_LIMIT(pwm, 0, 255);
+	return (u8)(pwm / 16);
+}
+
+static int ASB100_PWM_FROM_REG(u8 reg)
+{
+	return reg * 16;
+}
+
+#define ALARMS_FROM_REG(val) (val)
+
+#define DIV_FROM_REG(val) (1 << (val))
+
+/* FAN DIV: 1, 2, 4, or 8 (defaults to 2)
+   REG: 0, 1, 2, or 3 (respectively) (defaults to 1) */
+static u8 DIV_TO_REG(long val)
+{
+	return val==8 ? 3 : val==4 ? 2 : val==1 ? 0 : 1;
+}
+
+/* For each registered client, we need to keep some data in memory. That
+   data is pointed to by client->data. The structure itself is
+   dynamically allocated, at the same time the client itself is allocated. */
+struct asb100_data {
+	struct i2c_client client;
+	struct semaphore lock;
+	enum chips type;
+
+	struct semaphore update_lock;
+	unsigned long last_updated;	/* In jiffies */
+
+	/* array of 2 pointers to subclients */
+	struct i2c_client *lm75[2];
+
+	char valid;		/* !=0 if following fields are valid */
+	u8 in[7];		/* Register value */
+	u8 in_max[7];		/* Register value */
+	u8 in_min[7];		/* Register value */
+	u8 fan[3];		/* Register value */
+	u8 fan_min[3];		/* Register value */
+	u16 temp[4];		/* Register value (0 and 3 are u8 only) */
+	u16 temp_max[4];	/* Register value (0 and 3 are u8 only) */
+	u16 temp_hyst[4];	/* Register value (0 and 3 are u8 only) */
+	u8 fan_div[3];		/* Register encoding, right justified */
+	u8 pwm;			/* Register encoding */
+	u8 vid;			/* Register encoding, combined */
+	u32 alarms;		/* Register encoding, combined */
+	u8 vrm;
+};
+
+static int asb100_read_value(struct i2c_client *client, u16 reg);
+static void asb100_write_value(struct i2c_client *client, u16 reg, u16 val);
+
+static int asb100_attach_adapter(struct i2c_adapter *adapter);
+static int asb100_detect(struct i2c_adapter *adapter, int address, int kind);
+static int asb100_detach_client(struct i2c_client *client);
+static struct asb100_data *asb100_update_device(struct device *dev);
+static void asb100_init_client(struct i2c_client *client);
+
+static struct i2c_driver asb100_driver = {
+	.owner		= THIS_MODULE,
+	.name		= "asb100",
+	.id		= I2C_DRIVERID_ASB100,
+	.flags		= I2C_DF_NOTIFY,
+	.attach_adapter	= asb100_attach_adapter,
+	.detach_client	= asb100_detach_client,
+};
+
+/* 7 Voltages */
+#define show_in_reg(reg) \
+static ssize_t show_##reg (struct device *dev, char *buf, int nr) \
+{ \
+	struct asb100_data *data = asb100_update_device(dev); \
+	return sprintf(buf, "%d\n", IN_FROM_REG(data->reg[nr])); \
+}
+
+show_in_reg(in)
+show_in_reg(in_min)
+show_in_reg(in_max)
+
+#define set_in_reg(REG, reg) \
+static ssize_t set_in_##reg(struct device *dev, const char *buf, \
+		size_t count, int nr) \
+{ \
+	struct i2c_client *client = to_i2c_client(dev); \
+	struct asb100_data *data = i2c_get_clientdata(client); \
+	unsigned long val = simple_strtoul(buf, NULL, 10); \
+ \
+	down(&data->update_lock); \
+	data->in_##reg[nr] = IN_TO_REG(val); \
+	asb100_write_value(client, ASB100_REG_IN_##REG(nr), \
+		data->in_##reg[nr]); \
+	up(&data->update_lock); \
+	return count; \
+}
+
+set_in_reg(MIN, min)
+set_in_reg(MAX, max)
+
+#define sysfs_in(offset) \
+static ssize_t \
+	show_in##offset (struct device *dev, char *buf) \
+{ \
+	return show_in(dev, buf, offset); \
+} \
+static DEVICE_ATTR(in##offset##_input, S_IRUGO, \
+		show_in##offset, NULL); \
+static ssize_t \
+	show_in##offset##_min (struct device *dev, char *buf) \
+{ \
+	return show_in_min(dev, buf, offset); \
+} \
+static ssize_t \
+	show_in##offset##_max (struct device *dev, char *buf) \
+{ \
+	return show_in_max(dev, buf, offset); \
+} \
+static ssize_t set_in##offset##_min (struct device *dev, \
+		const char *buf, size_t count) \
+{ \
+	return set_in_min(dev, buf, count, offset); \
+} \
+static ssize_t set_in##offset##_max (struct device *dev, \
+		const char *buf, size_t count) \
+{ \
+	return set_in_max(dev, buf, count, offset); \
+} \
+static DEVICE_ATTR(in##offset##_min, S_IRUGO | S_IWUSR, \
+		show_in##offset##_min, set_in##offset##_min); \
+static DEVICE_ATTR(in##offset##_max, S_IRUGO | S_IWUSR, \
+		show_in##offset##_max, set_in##offset##_max);
+
+sysfs_in(0);
+sysfs_in(1);
+sysfs_in(2);
+sysfs_in(3);
+sysfs_in(4);
+sysfs_in(5);
+sysfs_in(6);
+
+#define device_create_file_in(client, offset) do { \
+	device_create_file(&client->dev, &dev_attr_in##offset##_input); \
+	device_create_file(&client->dev, &dev_attr_in##offset##_min); \
+	device_create_file(&client->dev, &dev_attr_in##offset##_max); \
+} while (0)
+
+/* 3 Fans */
+static ssize_t show_fan(struct device *dev, char *buf, int nr)
+{
+	struct asb100_data *data = asb100_update_device(dev);
+	return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan[nr],
+		DIV_FROM_REG(data->fan_div[nr])));
+}
+
+static ssize_t show_fan_min(struct device *dev, char *buf, int nr)
+{
+	struct asb100_data *data = asb100_update_device(dev);
+	return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan_min[nr],
+		DIV_FROM_REG(data->fan_div[nr])));
+}
+
+static ssize_t show_fan_div(struct device *dev, char *buf, int nr)
+{
+	struct asb100_data *data = asb100_update_device(dev);
+	return sprintf(buf, "%d\n", DIV_FROM_REG(data->fan_div[nr]));
+}
+
+static ssize_t set_fan_min(struct device *dev, const char *buf,
+				size_t count, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct asb100_data *data = i2c_get_clientdata(client);
+	u32 val = simple_strtoul(buf, NULL, 10);
+
+	down(&data->update_lock);
+	data->fan_min[nr] = FAN_TO_REG(val, DIV_FROM_REG(data->fan_div[nr]));
+	asb100_write_value(client, ASB100_REG_FAN_MIN(nr), data->fan_min[nr]);
+	up(&data->update_lock);
+	return count;
+}
+
+/* Note: we save and restore the fan minimum here, because its value is
+   determined in part by the fan divisor.  This follows the principle of
+   least suprise; the user doesn't expect the fan minimum to change just
+   because the divisor changed. */
+static ssize_t set_fan_div(struct device *dev, const char *buf,
+				size_t count, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct asb100_data *data = i2c_get_clientdata(client);
+	unsigned long min;
+	unsigned long val = simple_strtoul(buf, NULL, 10);
+	int reg;
+	
+	down(&data->update_lock);
+
+	min = FAN_FROM_REG(data->fan_min[nr],
+			DIV_FROM_REG(data->fan_div[nr]));
+	data->fan_div[nr] = DIV_TO_REG(val);
+
+	switch(nr) {
+	case 0:	/* fan 1 */
+		reg = asb100_read_value(client, ASB100_REG_VID_FANDIV);
+		reg = (reg & 0xcf) | (data->fan_div[0] << 4);
+		asb100_write_value(client, ASB100_REG_VID_FANDIV, reg);
+		break;
+
+	case 1:	/* fan 2 */
+		reg = asb100_read_value(client, ASB100_REG_VID_FANDIV);
+		reg = (reg & 0x3f) | (data->fan_div[1] << 6);
+		asb100_write_value(client, ASB100_REG_VID_FANDIV, reg);
+		break;
+
+	case 2:	/* fan 3 */
+		reg = asb100_read_value(client, ASB100_REG_PIN);
+		reg = (reg & 0x3f) | (data->fan_div[2] << 6);
+		asb100_write_value(client, ASB100_REG_PIN, reg);
+		break;
+	}
+
+	data->fan_min[nr] =
+		FAN_TO_REG(min, DIV_FROM_REG(data->fan_div[nr]));
+	asb100_write_value(client, ASB100_REG_FAN_MIN(nr), data->fan_min[nr]);
+
+	up(&data->update_lock);
+
+	return count;
+}
+
+#define sysfs_fan(offset) \
+static ssize_t show_fan##offset(struct device *dev, char *buf) \
+{ \
+	return show_fan(dev, buf, offset - 1); \
+} \
+static ssize_t show_fan##offset##_min(struct device *dev, char *buf) \
+{ \
+	return show_fan_min(dev, buf, offset - 1); \
+} \
+static ssize_t show_fan##offset##_div(struct device *dev, char *buf) \
+{ \
+	return show_fan_div(dev, buf, offset - 1); \
+} \
+static ssize_t set_fan##offset##_min(struct device *dev, const char *buf, \
+					size_t count) \
+{ \
+	return set_fan_min(dev, buf, count, offset - 1); \
+} \
+static ssize_t set_fan##offset##_div(struct device *dev, const char *buf, \
+					size_t count) \
+{ \
+	return set_fan_div(dev, buf, count, offset - 1); \
+} \
+static DEVICE_ATTR(fan##offset##_input, S_IRUGO, \
+		show_fan##offset, NULL); \
+static DEVICE_ATTR(fan##offset##_min, S_IRUGO | S_IWUSR, \
+		show_fan##offset##_min, set_fan##offset##_min); \
+static DEVICE_ATTR(fan##offset##_div, S_IRUGO | S_IWUSR, \
+		show_fan##offset##_div, set_fan##offset##_div);
+
+sysfs_fan(1);
+sysfs_fan(2);
+sysfs_fan(3);
+
+#define device_create_file_fan(client, offset) do { \
+	device_create_file(&client->dev, &dev_attr_fan##offset##_input); \
+	device_create_file(&client->dev, &dev_attr_fan##offset##_min); \
+	device_create_file(&client->dev, &dev_attr_fan##offset##_div); \
+} while (0)
+
+/* 4 Temp. Sensors */
+static int sprintf_temp_from_reg(u16 reg, char *buf, int nr)
+{
+	int ret = 0;
+
+	switch (nr) {
+	case 1: case 2:
+		ret = sprintf(buf, "%d\n", LM75_TEMP_FROM_REG(reg));
+		break;
+	case 0: case 3: default:
+		ret = sprintf(buf, "%d\n", TEMP_FROM_REG(reg));
+		break;
+	}
+	return ret;
+}
+		 	
+#define show_temp_reg(reg) \
+static ssize_t show_##reg(struct device *dev, char *buf, int nr) \
+{ \
+	struct asb100_data *data = asb100_update_device(dev); \
+	return sprintf_temp_from_reg(data->reg[nr], buf, nr); \
+}
+
+show_temp_reg(temp);
+show_temp_reg(temp_max);
+show_temp_reg(temp_hyst);
+
+#define set_temp_reg(REG, reg) \
+static ssize_t set_##reg(struct device *dev, const char *buf, \
+			size_t count, int nr) \
+{ \
+	struct i2c_client *client = to_i2c_client(dev); \
+	struct asb100_data *data = i2c_get_clientdata(client); \
+	unsigned long val = simple_strtoul(buf, NULL, 10); \
+ \
+	down(&data->update_lock); \
+	switch (nr) { \
+	case 1: case 2: \
+		data->reg[nr] = LM75_TEMP_TO_REG(val); \
+		break; \
+	case 0: case 3: default: \
+		data->reg[nr] = TEMP_TO_REG(val); \
+		break; \
+	} \
+	asb100_write_value(client, ASB100_REG_TEMP_##REG(nr+1), \
+			data->reg[nr]); \
+	up(&data->update_lock); \
+	return count; \
+}
+
+set_temp_reg(MAX, temp_max);
+set_temp_reg(HYST, temp_hyst);
+
+#define sysfs_temp(num) \
+static ssize_t show_temp##num(struct device *dev, char *buf) \
+{ \
+	return show_temp(dev, buf, num-1); \
+} \
+static DEVICE_ATTR(temp##num##_input, S_IRUGO, show_temp##num, NULL); \
+static ssize_t show_temp_max##num(struct device *dev, char *buf) \
+{ \
+	return show_temp_max(dev, buf, num-1); \
+} \
+static ssize_t set_temp_max##num(struct device *dev, const char *buf, \
+					size_t count) \
+{ \
+	return set_temp_max(dev, buf, count, num-1); \
+} \
+static DEVICE_ATTR(temp##num##_max, S_IRUGO | S_IWUSR, \
+		show_temp_max##num, set_temp_max##num); \
+static ssize_t show_temp_hyst##num(struct device *dev, char *buf) \
+{ \
+	return show_temp_hyst(dev, buf, num-1); \
+} \
+static ssize_t set_temp_hyst##num(struct device *dev, const char *buf, \
+					size_t count) \
+{ \
+	return set_temp_hyst(dev, buf, count, num-1); \
+} \
+static DEVICE_ATTR(temp##num##_max_hyst, S_IRUGO | S_IWUSR, \
+		show_temp_hyst##num, set_temp_hyst##num);
+
+sysfs_temp(1);
+sysfs_temp(2);
+sysfs_temp(3);
+sysfs_temp(4);
+
+/* VID */
+#define device_create_file_temp(client, num) do { \
+	device_create_file(&client->dev, &dev_attr_temp##num##_input); \
+	device_create_file(&client->dev, &dev_attr_temp##num##_max); \
+	device_create_file(&client->dev, &dev_attr_temp##num##_max_hyst); \
+} while (0)
+
+static ssize_t show_vid(struct device *dev, char *buf)
+{
+	struct asb100_data *data = asb100_update_device(dev);
+	return sprintf(buf, "%d\n", vid_from_reg(data->vid, data->vrm));
+}
+
+static DEVICE_ATTR(cpu0_vid, S_IRUGO, show_vid, NULL);
+#define device_create_file_vid(client) \
+device_create_file(&client->dev, &dev_attr_cpu0_vid)
+
+/* VRM */
+static ssize_t show_vrm(struct device *dev, char *buf)
+{
+	struct asb100_data *data = asb100_update_device(dev);
+	return sprintf(buf, "%d\n", data->vrm);
+}
+
+static ssize_t set_vrm(struct device *dev, const char *buf, size_t count)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct asb100_data *data = i2c_get_clientdata(client);
+	unsigned long val = simple_strtoul(buf, NULL, 10);
+	data->vrm = val;
+	return count;
+}
+
+/* Alarms */
+static DEVICE_ATTR(vrm, S_IRUGO | S_IWUSR, show_vrm, set_vrm);
+#define device_create_file_vrm(client) \
+device_create_file(&client->dev, &dev_attr_vrm);
+
+static ssize_t show_alarms(struct device *dev, char *buf)
+{
+	struct asb100_data *data = asb100_update_device(dev);
+	return sprintf(buf, "%d\n", ALARMS_FROM_REG(data->alarms));
+}
+
+static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL);
+#define device_create_file_alarms(client) \
+device_create_file(&client->dev, &dev_attr_alarms)
+
+/* 1 PWM */
+static ssize_t show_pwm1(struct device *dev, char *buf)
+{
+	struct asb100_data *data = asb100_update_device(dev);
+	return sprintf(buf, "%d\n", ASB100_PWM_FROM_REG(data->pwm & 0x0f));
+}
+
+static ssize_t set_pwm1(struct device *dev, const char *buf, size_t count)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct asb100_data *data = i2c_get_clientdata(client);
+	unsigned long val = simple_strtoul(buf, NULL, 10);
+
+	down(&data->update_lock);
+	data->pwm &= 0x80; /* keep the enable bit */
+	data->pwm |= (0x0f & ASB100_PWM_TO_REG(val));
+	asb100_write_value(client, ASB100_REG_PWM1, data->pwm);
+	up(&data->update_lock);
+	return count;
+}
+
+static ssize_t show_pwm_enable1(struct device *dev, char *buf)
+{
+	struct asb100_data *data = asb100_update_device(dev);
+	return sprintf(buf, "%d\n", (data->pwm & 0x80) ? 1 : 0);
+}
+
+static ssize_t set_pwm_enable1(struct device *dev, const char *buf,
+				size_t count)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct asb100_data *data = i2c_get_clientdata(client);
+	unsigned long val = simple_strtoul(buf, NULL, 10);
+
+	down(&data->update_lock);
+	data->pwm &= 0x0f; /* keep the duty cycle bits */
+	data->pwm |= (val ? 0x80 : 0x00);
+	asb100_write_value(client, ASB100_REG_PWM1, data->pwm);
+	up(&data->update_lock);
+	return count;
+}
+
+static DEVICE_ATTR(pwm1, S_IRUGO | S_IWUSR, show_pwm1, set_pwm1);
+static DEVICE_ATTR(pwm1_enable, S_IRUGO | S_IWUSR,
+		show_pwm_enable1, set_pwm_enable1);
+#define device_create_file_pwm1(client) do { \
+	device_create_file(&new_client->dev, &dev_attr_pwm1); \
+	device_create_file(&new_client->dev, &dev_attr_pwm1_enable); \
+} while (0)
+
+/* This function is called when:
+	asb100_driver is inserted (when this module is loaded), for each
+		available adapter
+	when a new adapter is inserted (and asb100_driver is still present)
+ */
+static int asb100_attach_adapter(struct i2c_adapter *adapter)
+{
+	if (!(adapter->class & I2C_CLASS_HWMON))
+		return 0;
+	return i2c_detect(adapter, &addr_data, asb100_detect);
+}
+
+static int asb100_detect_subclients(struct i2c_adapter *adapter, int address,
+		int kind, struct i2c_client *new_client)
+{
+	int i, id, err;
+	struct asb100_data *data = i2c_get_clientdata(new_client);
+
+	data->lm75[0] = kmalloc(sizeof(struct i2c_client), GFP_KERNEL);
+	if (!(data->lm75[0])) {
+		err = -ENOMEM;
+		goto ERROR_SC_0;
+	}
+	memset(data->lm75[0], 0x00, sizeof(struct i2c_client));
+
+	data->lm75[1] = kmalloc(sizeof(struct i2c_client), GFP_KERNEL);
+	if (!(data->lm75[1])) {
+		err = -ENOMEM;
+		goto ERROR_SC_1;
+	}
+	memset(data->lm75[1], 0x00, sizeof(struct i2c_client));
+
+	id = i2c_adapter_id(adapter);
+
+	if (force_subclients[0] == id && force_subclients[1] == address) {
+		for (i = 2; i <= 3; i++) {
+			if (force_subclients[i] < 0x48 ||
+			    force_subclients[i] > 0x4f) {
+				dev_err(&new_client->dev, "invalid subclient "
+					"address %d; must be 0x48-0x4f\n",
+					force_subclients[i]);
+				err = -ENODEV;
+				goto ERROR_SC_2;
+			}
+		}
+		asb100_write_value(new_client, ASB100_REG_I2C_SUBADDR,
+					(force_subclients[2] & 0x07) |
+					((force_subclients[3] & 0x07) <<4));
+		data->lm75[0]->addr = force_subclients[2];
+		data->lm75[1]->addr = force_subclients[3];
+	} else {
+		int val = asb100_read_value(new_client, ASB100_REG_I2C_SUBADDR);
+		data->lm75[0]->addr = 0x48 + (val & 0x07);
+		data->lm75[1]->addr = 0x48 + ((val >> 4) & 0x07);
+	}
+
+	if(data->lm75[0]->addr == data->lm75[1]->addr) {
+		dev_err(&new_client->dev, "duplicate addresses 0x%x "
+				"for subclients\n", data->lm75[0]->addr);
+		err = -ENODEV;
+		goto ERROR_SC_2;
+	}
+
+	for (i = 0; i <= 1; i++) {
+		i2c_set_clientdata(data->lm75[i], NULL);
+		data->lm75[i]->adapter = adapter;
+		data->lm75[i]->driver = &asb100_driver;
+		data->lm75[i]->flags = 0;
+		strlcpy(data->lm75[i]->name, "asb100 subclient", I2C_NAME_SIZE);
+	}
+
+	if ((err = i2c_attach_client(data->lm75[0]))) {
+		dev_err(&new_client->dev, "subclient %d registration "
+			"at address 0x%x failed.\n", i, data->lm75[0]->addr);
+		goto ERROR_SC_2;
+	}
+
+	if ((err = i2c_attach_client(data->lm75[1]))) {
+		dev_err(&new_client->dev, "subclient %d registration "
+			"at address 0x%x failed.\n", i, data->lm75[1]->addr);
+		goto ERROR_SC_3;
+	}
+
+	return 0;
+
+/* Undo inits in case of errors */
+ERROR_SC_3:
+	i2c_detach_client(data->lm75[0]);
+ERROR_SC_2:
+	kfree(data->lm75[1]);
+ERROR_SC_1:
+	kfree(data->lm75[0]);
+ERROR_SC_0:
+	return err;
+}
+
+static int asb100_detect(struct i2c_adapter *adapter, int address, int kind)
+{
+	int err;
+	struct i2c_client *new_client;
+	struct asb100_data *data;
+
+	/* asb100 is SMBus only */
+	if (i2c_is_isa_adapter(adapter)) {
+		pr_debug("asb100.o: detect failed, "
+				"cannot attach to legacy adapter!\n");
+		err = -ENODEV;
+		goto ERROR0;
+	}
+
+	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) {
+		pr_debug("asb100.o: detect failed, "
+				"smbus byte data not supported!\n");
+		err = -ENODEV;
+		goto ERROR0;
+	}
+
+	/* OK. For now, we presume we have a valid client. We now create the
+	   client structure, even though we cannot fill it completely yet.
+	   But it allows us to access asb100_{read,write}_value. */
+
+	if (!(data = kmalloc(sizeof(struct asb100_data), GFP_KERNEL))) {
+		pr_debug("asb100.o: detect failed, kmalloc failed!\n");
+		err = -ENOMEM;
+		goto ERROR0;
+	}
+	memset(data, 0, sizeof(struct asb100_data));
+
+	new_client = &data->client;
+	init_MUTEX(&data->lock);
+	i2c_set_clientdata(new_client, data);
+	new_client->addr = address;
+	new_client->adapter = adapter;
+	new_client->driver = &asb100_driver;
+	new_client->flags = 0;
+
+	/* Now, we do the remaining detection. */
+
+	/* The chip may be stuck in some other bank than bank 0. This may
+	   make reading other information impossible. Specify a force=... or
+	   force_*=... parameter, and the chip will be reset to the right
+	   bank. */
+	if (kind < 0) {
+
+		int val1 = asb100_read_value(new_client, ASB100_REG_BANK);
+		int val2 = asb100_read_value(new_client, ASB100_REG_CHIPMAN);
+
+		/* If we're in bank 0 */
+		if ( (!(val1 & 0x07)) &&
+				/* Check for ASB100 ID (low byte) */
+				( ((!(val1 & 0x80)) && (val2 != 0x94)) ||
+				/* Check for ASB100 ID (high byte ) */
+				((val1 & 0x80) && (val2 != 0x06)) ) ) {
+			pr_debug("asb100.o: detect failed, "
+					"bad chip id 0x%02x!\n", val2);
+			err = -ENODEV;
+			goto ERROR1;
+		}
+
+	} /* kind < 0 */
+
+	/* We have either had a force parameter, or we have already detected
+	   Winbond. Put it now into bank 0 and Vendor ID High Byte */
+	asb100_write_value(new_client, ASB100_REG_BANK,
+		(asb100_read_value(new_client, ASB100_REG_BANK) & 0x78) | 0x80);
+
+	/* Determine the chip type. */
+	if (kind <= 0) {
+		int val1 = asb100_read_value(new_client, ASB100_REG_WCHIPID);
+		int val2 = asb100_read_value(new_client, ASB100_REG_CHIPMAN);
+
+		if ((val1 == 0x31) && (val2 == 0x06))
+			kind = asb100;
+		else {
+			if (kind == 0)
+				dev_warn(&new_client->dev, "ignoring "
+					"'force' parameter for unknown chip "
+					"at adapter %d, address 0x%02x.\n",
+					i2c_adapter_id(adapter), address);
+			err = -ENODEV;
+			goto ERROR1;
+		}
+	}
+
+	/* Fill in remaining client fields and put it into the global list */
+	strlcpy(new_client->name, "asb100", I2C_NAME_SIZE);
+	data->type = kind;
+
+	data->valid = 0;
+	init_MUTEX(&data->update_lock);
+
+	/* Tell the I2C layer a new client has arrived */
+	if ((err = i2c_attach_client(new_client)))
+		goto ERROR1;
+
+	/* Attach secondary lm75 clients */
+	if ((err = asb100_detect_subclients(adapter, address, kind,
+			new_client)))
+		goto ERROR2;
+
+	/* Initialize the chip */
+	asb100_init_client(new_client);
+
+	/* A few vars need to be filled upon startup */
+	data->fan_min[0] = asb100_read_value(new_client, ASB100_REG_FAN_MIN(0));
+	data->fan_min[1] = asb100_read_value(new_client, ASB100_REG_FAN_MIN(1));
+	data->fan_min[2] = asb100_read_value(new_client, ASB100_REG_FAN_MIN(2));
+
+	/* Register sysfs hooks */
+	device_create_file_in(new_client, 0);
+	device_create_file_in(new_client, 1);
+	device_create_file_in(new_client, 2);
+	device_create_file_in(new_client, 3);
+	device_create_file_in(new_client, 4);
+	device_create_file_in(new_client, 5);
+	device_create_file_in(new_client, 6);
+
+	device_create_file_fan(new_client, 1);
+	device_create_file_fan(new_client, 2);
+	device_create_file_fan(new_client, 3);
+
+	device_create_file_temp(new_client, 1);
+	device_create_file_temp(new_client, 2);
+	device_create_file_temp(new_client, 3);
+	device_create_file_temp(new_client, 4);
+
+	device_create_file_vid(new_client);
+	device_create_file_vrm(new_client);
+
+	device_create_file_alarms(new_client);
+
+	device_create_file_pwm1(new_client);
+
+	return 0;
+
+ERROR2:
+	i2c_detach_client(new_client);
+ERROR1:
+	kfree(data);
+ERROR0:
+	return err;
+}
+
+static int asb100_detach_client(struct i2c_client *client)
+{
+	int err;
+
+	if ((err = i2c_detach_client(client))) {
+		dev_err(&client->dev, "client deregistration failed; "
+			"client not detached.\n");
+		return err;
+	}
+
+	if (i2c_get_clientdata(client)==NULL) {
+		/* subclients */
+		kfree(client);
+	} else {
+		/* main client */
+		kfree(i2c_get_clientdata(client));
+	}
+
+	return 0;
+}
+
+/* The SMBus locks itself, usually, but nothing may access the chip between
+   bank switches. */
+static int asb100_read_value(struct i2c_client *client, u16 reg)
+{
+	struct asb100_data *data = i2c_get_clientdata(client);
+	struct i2c_client *cl;
+	int res, bank;
+
+	down(&data->lock);
+
+	bank = (reg >> 8) & 0x0f;
+	if (bank > 2)
+		/* switch banks */
+		i2c_smbus_write_byte_data(client, ASB100_REG_BANK, bank);
+
+	if (bank == 0 || bank > 2) {
+		res = i2c_smbus_read_byte_data(client, reg & 0xff);
+	} else {
+		/* switch to subclient */
+		cl = data->lm75[bank - 1];
+
+		/* convert from ISA to LM75 I2C addresses */
+		switch (reg & 0xff) {
+		case 0x50: /* TEMP */
+			res = swab16(i2c_smbus_read_word_data (cl, 0));
+			break;
+		case 0x52: /* CONFIG */
+			res = i2c_smbus_read_byte_data(cl, 1);
+			break;
+		case 0x53: /* HYST */
+			res = swab16(i2c_smbus_read_word_data (cl, 2));
+			break;
+		case 0x55: /* MAX */
+		default:
+			res = swab16(i2c_smbus_read_word_data (cl, 3));
+			break;
+		}
+	}
+
+	if (bank > 2)
+		i2c_smbus_write_byte_data(client, ASB100_REG_BANK, 0);
+
+	up(&data->lock);
+
+	return res;
+}
+
+static void asb100_write_value(struct i2c_client *client, u16 reg, u16 value)
+{
+	struct asb100_data *data = i2c_get_clientdata(client);
+	struct i2c_client *cl;
+	int bank;
+
+	down(&data->lock);
+
+	bank = (reg >> 8) & 0x0f;
+	if (bank > 2)
+		/* switch banks */
+		i2c_smbus_write_byte_data(client, ASB100_REG_BANK, bank);
+
+	if (bank == 0 || bank > 2) {
+		i2c_smbus_write_byte_data(client, reg & 0xff, value & 0xff);
+	} else {
+		/* switch to subclient */
+		cl = data->lm75[bank - 1];
+
+		/* convert from ISA to LM75 I2C addresses */
+		switch (reg & 0xff) {
+		case 0x52: /* CONFIG */
+			i2c_smbus_write_byte_data(cl, 1, value & 0xff);
+			break;
+		case 0x53: /* HYST */
+			i2c_smbus_write_word_data(cl, 2, swab16(value));
+			break;
+		case 0x55: /* MAX */
+			i2c_smbus_write_word_data(cl, 3, swab16(value));
+			break;
+		}
+	}
+
+	if (bank > 2)
+		i2c_smbus_write_byte_data(client, ASB100_REG_BANK, 0);
+
+	up(&data->lock);
+}
+
+static void asb100_init_client(struct i2c_client *client)
+{
+	struct asb100_data *data = i2c_get_clientdata(client);
+	int vid = 0;
+
+	vid = asb100_read_value(client, ASB100_REG_VID_FANDIV) & 0x0f;
+	vid |= (asb100_read_value(client, ASB100_REG_CHIPID) & 0x01) << 4;
+	data->vrm = i2c_which_vrm();
+	vid = vid_from_reg(vid, data->vrm);
+
+	/* Start monitoring */
+	asb100_write_value(client, ASB100_REG_CONFIG, 
+		(asb100_read_value(client, ASB100_REG_CONFIG) & 0xf7) | 0x01);
+}
+
+static struct asb100_data *asb100_update_device(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct asb100_data *data = i2c_get_clientdata(client);
+	int i;
+
+	down(&data->update_lock);
+
+	if (time_after(jiffies, data->last_updated + HZ + HZ / 2)
+		|| !data->valid) {
+
+		dev_dbg(&client->dev, "starting device update...\n");
+
+		/* 7 voltage inputs */
+		for (i = 0; i < 7; i++) {
+			data->in[i] = asb100_read_value(client,
+				ASB100_REG_IN(i));
+			data->in_min[i] = asb100_read_value(client,
+				ASB100_REG_IN_MIN(i));
+			data->in_max[i] = asb100_read_value(client,
+				ASB100_REG_IN_MAX(i));
+		}
+
+		/* 3 fan inputs */
+		for (i = 0; i < 3; i++) {
+			data->fan[i] = asb100_read_value(client,
+					ASB100_REG_FAN(i));
+			data->fan_min[i] = asb100_read_value(client,
+					ASB100_REG_FAN_MIN(i));
+		}
+
+		/* 4 temperature inputs */
+		for (i = 1; i <= 4; i++) {
+			data->temp[i-1] = asb100_read_value(client,
+					ASB100_REG_TEMP(i));
+			data->temp_max[i-1] = asb100_read_value(client,
+					ASB100_REG_TEMP_MAX(i));
+			data->temp_hyst[i-1] = asb100_read_value(client,
+					ASB100_REG_TEMP_HYST(i));
+		}
+
+		/* VID and fan divisors */
+		i = asb100_read_value(client, ASB100_REG_VID_FANDIV);
+		data->vid = i & 0x0f;
+		data->vid |= (asb100_read_value(client,
+				ASB100_REG_CHIPID) & 0x01) << 4;
+		data->fan_div[0] = (i >> 4) & 0x03;
+		data->fan_div[1] = (i >> 6) & 0x03;
+		data->fan_div[2] = (asb100_read_value(client,
+				ASB100_REG_PIN) >> 6) & 0x03;
+
+		/* PWM */
+		data->pwm = asb100_read_value(client, ASB100_REG_PWM1);
+
+		/* alarms */
+		data->alarms = asb100_read_value(client, ASB100_REG_ALARM1) +
+			(asb100_read_value(client, ASB100_REG_ALARM2) << 8);
+
+		data->last_updated = jiffies;
+		data->valid = 1;
+
+		dev_dbg(&client->dev, "... device update complete\n");
+	}
+
+	up(&data->update_lock);
+
+	return data;
+}
+
+static int __init asb100_init(void)
+{
+	return i2c_add_driver(&asb100_driver);
+}
+
+static void __exit asb100_exit(void)
+{
+	i2c_del_driver(&asb100_driver);
+}
+
+MODULE_AUTHOR("Mark M. Hoffman <mhoffman@lightlink.com>");
+MODULE_DESCRIPTION("ASB100 Bach driver");
+MODULE_LICENSE("GPL");
+
+module_init(asb100_init);
+module_exit(asb100_exit);
+
diff --git a/drivers/i2c/chips/ds1337.c b/drivers/i2c/chips/ds1337.c
new file mode 100644
index 00000000000..07f16c3fb08
--- /dev/null
+++ b/drivers/i2c/chips/ds1337.c
@@ -0,0 +1,402 @@
+/*
+ *  linux/drivers/i2c/chips/ds1337.c
+ *
+ *  Copyright (C) 2005 James Chapman <jchapman@katalix.com>
+ *
+ *	based on linux/drivers/acron/char/pcf8583.c
+ *  Copyright (C) 2000 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Driver for Dallas Semiconductor DS1337 real time clock chip
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/i2c-sensor.h>
+#include <linux/string.h>
+#include <linux/rtc.h>		/* get the user-level API */
+#include <linux/bcd.h>
+#include <linux/list.h>
+
+/* Device registers */
+#define DS1337_REG_HOUR		2
+#define DS1337_REG_DAY		3
+#define DS1337_REG_DATE		4
+#define DS1337_REG_MONTH	5
+#define DS1337_REG_CONTROL	14
+#define DS1337_REG_STATUS	15
+
+/* FIXME - how do we export these interface constants? */
+#define DS1337_GET_DATE		0
+#define DS1337_SET_DATE		1
+
+/*
+ * Functions declaration
+ */
+static unsigned short normal_i2c[] = { 0x68, I2C_CLIENT_END };
+static unsigned int normal_isa[] = { I2C_CLIENT_ISA_END };
+
+SENSORS_INSMOD_1(ds1337);
+
+static int ds1337_attach_adapter(struct i2c_adapter *adapter);
+static int ds1337_detect(struct i2c_adapter *adapter, int address, int kind);
+static void ds1337_init_client(struct i2c_client *client);
+static int ds1337_detach_client(struct i2c_client *client);
+static int ds1337_command(struct i2c_client *client, unsigned int cmd,
+			  void *arg);
+
+/*
+ * Driver data (common to all clients)
+ */
+static struct i2c_driver ds1337_driver = {
+	.owner		= THIS_MODULE,
+	.name		= "ds1337",
+	.flags		= I2C_DF_NOTIFY,
+	.attach_adapter	= ds1337_attach_adapter,
+	.detach_client	= ds1337_detach_client,
+	.command	= ds1337_command,
+};
+
+/*
+ * Client data (each client gets its own)
+ */
+struct ds1337_data {
+	struct i2c_client client;
+	struct list_head list;
+	int id;
+};
+
+/*
+ * Internal variables
+ */
+static int ds1337_id;
+static LIST_HEAD(ds1337_clients);
+
+static inline int ds1337_read(struct i2c_client *client, u8 reg, u8 *value)
+{
+	s32 tmp = i2c_smbus_read_byte_data(client, reg);
+
+	if (tmp < 0)
+		return -EIO;
+
+	*value = tmp;
+
+	return 0;
+}
+
+/*
+ * Chip access functions
+ */
+static int ds1337_get_datetime(struct i2c_client *client, struct rtc_time *dt)
+{
+	struct ds1337_data *data = i2c_get_clientdata(client);
+	int result;
+	u8 buf[7];
+	u8 val;
+	struct i2c_msg msg[2];
+	u8 offs = 0;
+
+	if (!dt) {
+		dev_dbg(&client->adapter->dev, "%s: EINVAL: dt=NULL\n",
+			__FUNCTION__);
+
+		return -EINVAL;
+	}
+
+	msg[0].addr = client->addr;
+	msg[0].flags = 0;
+	msg[0].len = 1;
+	msg[0].buf = &offs;
+
+	msg[1].addr = client->addr;
+	msg[1].flags = I2C_M_RD;
+	msg[1].len = sizeof(buf);
+	msg[1].buf = &buf[0];
+
+	result = client->adapter->algo->master_xfer(client->adapter,
+						    &msg[0], 2);
+
+	dev_dbg(&client->adapter->dev,
+		"%s: [%d] %02x %02x %02x %02x %02x %02x %02x\n",
+		__FUNCTION__, result, buf[0], buf[1], buf[2], buf[3],
+		buf[4], buf[5], buf[6]);
+
+	if (result >= 0) {
+		dt->tm_sec = BCD_TO_BIN(buf[0]);
+		dt->tm_min = BCD_TO_BIN(buf[1]);
+		val = buf[2] & 0x3f;
+		dt->tm_hour = BCD_TO_BIN(val);
+		dt->tm_wday = BCD_TO_BIN(buf[3]) - 1;
+		dt->tm_mday = BCD_TO_BIN(buf[4]);
+		val = buf[5] & 0x7f;
+		dt->tm_mon = BCD_TO_BIN(val);
+		dt->tm_year = 1900 + BCD_TO_BIN(buf[6]);
+		if (buf[5] & 0x80)
+			dt->tm_year += 100;
+
+		dev_dbg(&client->adapter->dev, "%s: secs=%d, mins=%d, "
+			"hours=%d, mday=%d, mon=%d, year=%d, wday=%d\n",
+			__FUNCTION__, dt->tm_sec, dt->tm_min,
+			dt->tm_hour, dt->tm_mday,
+			dt->tm_mon, dt->tm_year, dt->tm_wday);
+	} else {
+		dev_err(&client->adapter->dev, "ds1337[%d]: error reading "
+			"data! %d\n", data->id, result);
+		result = -EIO;
+	}
+
+	return result;
+}
+
+static int ds1337_set_datetime(struct i2c_client *client, struct rtc_time *dt)
+{
+	struct ds1337_data *data = i2c_get_clientdata(client);
+	int result;
+	u8 buf[8];
+	u8 val;
+	struct i2c_msg msg[1];
+
+	if (!dt) {
+		dev_dbg(&client->adapter->dev, "%s: EINVAL: dt=NULL\n",
+			__FUNCTION__);
+
+		return -EINVAL;
+	}
+
+	dev_dbg(&client->adapter->dev, "%s: secs=%d, mins=%d, hours=%d, "
+		"mday=%d, mon=%d, year=%d, wday=%d\n", __FUNCTION__,
+		dt->tm_sec, dt->tm_min, dt->tm_hour,
+		dt->tm_mday, dt->tm_mon, dt->tm_year, dt->tm_wday);
+
+	buf[0] = 0;		/* reg offset */
+	buf[1] = BIN_TO_BCD(dt->tm_sec);
+	buf[2] = BIN_TO_BCD(dt->tm_min);
+	buf[3] = BIN_TO_BCD(dt->tm_hour) | (1 << 6);
+	buf[4] = BIN_TO_BCD(dt->tm_wday) + 1;
+	buf[5] = BIN_TO_BCD(dt->tm_mday);
+	buf[6] = BIN_TO_BCD(dt->tm_mon);
+	if (dt->tm_year >= 2000) {
+		val = dt->tm_year - 2000;
+		buf[6] |= (1 << 7);
+	} else {
+		val = dt->tm_year - 1900;
+	}
+	buf[7] = BIN_TO_BCD(val);
+
+	msg[0].addr = client->addr;
+	msg[0].flags = 0;
+	msg[0].len = sizeof(buf);
+	msg[0].buf = &buf[0];
+
+	result = client->adapter->algo->master_xfer(client->adapter,
+						    &msg[0], 1);
+	if (result < 0) {
+		dev_err(&client->adapter->dev, "ds1337[%d]: error "
+			"writing data! %d\n", data->id, result);
+		result = -EIO;
+	} else {
+		result = 0;
+	}
+
+	return result;
+}
+
+static int ds1337_command(struct i2c_client *client, unsigned int cmd,
+			  void *arg)
+{
+	dev_dbg(&client->adapter->dev, "%s: cmd=%d\n", __FUNCTION__, cmd);
+
+	switch (cmd) {
+	case DS1337_GET_DATE:
+		return ds1337_get_datetime(client, arg);
+
+	case DS1337_SET_DATE:
+		return ds1337_set_datetime(client, arg);
+
+	default:
+		return -EINVAL;
+	}
+}
+
+/*
+ * Public API for access to specific device. Useful for low-level
+ * RTC access from kernel code.
+ */
+int ds1337_do_command(int id, int cmd, void *arg)
+{
+	struct list_head *walk;
+	struct list_head *tmp;
+	struct ds1337_data *data;
+
+	list_for_each_safe(walk, tmp, &ds1337_clients) {
+		data = list_entry(walk, struct ds1337_data, list);
+		if (data->id == id)
+			return ds1337_command(&data->client, cmd, arg);
+	}
+
+	return -ENODEV;
+}
+
+static int ds1337_attach_adapter(struct i2c_adapter *adapter)
+{
+	return i2c_detect(adapter, &addr_data, ds1337_detect);
+}
+
+/*
+ * The following function does more than just detection. If detection
+ * succeeds, it also registers the new chip.
+ */
+static int ds1337_detect(struct i2c_adapter *adapter, int address, int kind)
+{
+	struct i2c_client *new_client;
+	struct ds1337_data *data;
+	int err = 0;
+	const char *name = "";
+
+	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA |
+				     I2C_FUNC_I2C))
+		goto exit;
+
+	if (!(data = kmalloc(sizeof(struct ds1337_data), GFP_KERNEL))) {
+		err = -ENOMEM;
+		goto exit;
+	}
+	memset(data, 0, sizeof(struct ds1337_data));
+	INIT_LIST_HEAD(&data->list);
+
+	/* The common I2C client data is placed right before the
+	 * DS1337-specific data. 
+	 */
+	new_client = &data->client;
+	i2c_set_clientdata(new_client, data);
+	new_client->addr = address;
+	new_client->adapter = adapter;
+	new_client->driver = &ds1337_driver;
+	new_client->flags = 0;
+
+	/*
+	 * Now we do the remaining detection. A negative kind means that
+	 * the driver was loaded with no force parameter (default), so we
+	 * must both detect and identify the chip. A zero kind means that
+	 * the driver was loaded with the force parameter, the detection
+	 * step shall be skipped. A positive kind means that the driver
+	 * was loaded with the force parameter and a given kind of chip is
+	 * requested, so both the detection and the identification steps
+	 * are skipped.
+	 *
+	 * For detection, we read registers that are most likely to cause
+	 * detection failure, i.e. those that have more bits with fixed
+	 * or reserved values.
+	 */
+
+	/* Default to an DS1337 if forced */
+	if (kind == 0)
+		kind = ds1337;
+
+	if (kind < 0) {		/* detection and identification */
+		u8 data;
+
+		/* Check that status register bits 6-2 are zero */
+		if ((ds1337_read(new_client, DS1337_REG_STATUS, &data) < 0) ||
+		    (data & 0x7c))
+			goto exit_free;
+
+		/* Check for a valid day register value */
+		if ((ds1337_read(new_client, DS1337_REG_DAY, &data) < 0) ||
+		    (data == 0) || (data & 0xf8))
+			goto exit_free;
+
+		/* Check for a valid date register value */
+		if ((ds1337_read(new_client, DS1337_REG_DATE, &data) < 0) ||
+		    (data == 0) || (data & 0xc0) || ((data & 0x0f) > 9) ||
+		    (data >= 0x32))
+			goto exit_free;
+
+		/* Check for a valid month register value */
+		if ((ds1337_read(new_client, DS1337_REG_MONTH, &data) < 0) ||
+		    (data == 0) || (data & 0x60) || ((data & 0x0f) > 9) ||
+		    ((data >= 0x13) && (data <= 0x19)))
+			goto exit_free;
+
+		/* Check that control register bits 6-5 are zero */
+		if ((ds1337_read(new_client, DS1337_REG_CONTROL, &data) < 0) ||
+		    (data & 0x60))
+			goto exit_free;
+
+		kind = ds1337;
+	}
+
+	if (kind == ds1337)
+		name = "ds1337";
+
+	/* We can fill in the remaining client fields */
+	strlcpy(new_client->name, name, I2C_NAME_SIZE);
+
+	/* Tell the I2C layer a new client has arrived */
+	if ((err = i2c_attach_client(new_client)))
+		goto exit_free;
+
+	/* Initialize the DS1337 chip */
+	ds1337_init_client(new_client);
+
+	/* Add client to local list */
+	data->id = ds1337_id++;
+	list_add(&data->list, &ds1337_clients);
+
+	return 0;
+
+exit_free:
+	kfree(data);
+exit:
+	return err;
+}
+
+static void ds1337_init_client(struct i2c_client *client)
+{
+	s32 val;
+
+	/* Ensure that device is set in 24-hour mode */
+	val = i2c_smbus_read_byte_data(client, DS1337_REG_HOUR);
+	if ((val >= 0) && (val & (1 << 6)) == 0)
+		i2c_smbus_write_byte_data(client, DS1337_REG_HOUR,
+					  val | (1 << 6));
+}
+
+static int ds1337_detach_client(struct i2c_client *client)
+{
+	int err;
+	struct ds1337_data *data = i2c_get_clientdata(client);
+
+	if ((err = i2c_detach_client(client))) {
+		dev_err(&client->dev, "Client deregistration failed, "
+			"client not detached.\n");
+		return err;
+	}
+
+	list_del(&data->list);
+	kfree(data);
+	return 0;
+}
+
+static int __init ds1337_init(void)
+{
+	return i2c_add_driver(&ds1337_driver);
+}
+
+static void __exit ds1337_exit(void)
+{
+	i2c_del_driver(&ds1337_driver);
+}
+
+MODULE_AUTHOR("James Chapman <jchapman@katalix.com>");
+MODULE_DESCRIPTION("DS1337 RTC driver");
+MODULE_LICENSE("GPL");
+
+module_init(ds1337_init);
+module_exit(ds1337_exit);
diff --git a/drivers/i2c/chips/ds1621.c b/drivers/i2c/chips/ds1621.c
new file mode 100644
index 00000000000..bb1fefb2162
--- /dev/null
+++ b/drivers/i2c/chips/ds1621.c
@@ -0,0 +1,341 @@
+/*
+    ds1621.c - Part of lm_sensors, Linux kernel modules for hardware
+             monitoring
+    Christian W. Zuckschwerdt  <zany@triq.net>  2000-11-23
+    based on lm75.c by Frodo Looijaard <frodol@dds.nl>
+    Ported to Linux 2.6 by Aurelien Jarno <aurelien@aurel32.net> with 
+    the help of Jean Delvare <khali@linux-fr.org>
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/jiffies.h>
+#include <linux/i2c.h>
+#include <linux/i2c-sensor.h>
+#include "lm75.h"
+
+/* Addresses to scan */
+static unsigned short normal_i2c[] = { 0x48, 0x49, 0x4a, 0x4b, 0x4c,
+					0x4d, 0x4e, 0x4f, I2C_CLIENT_END };
+static unsigned int normal_isa[] = { I2C_CLIENT_ISA_END };
+
+/* Insmod parameters */
+SENSORS_INSMOD_1(ds1621);
+static int polarity = -1;
+module_param(polarity, int, 0);
+MODULE_PARM_DESC(polarity, "Output's polarity: 0 = active high, 1 = active low");
+
+/* Many DS1621 constants specified below */
+/* Config register used for detection         */
+/*  7    6    5    4    3    2    1    0      */
+/* |Done|THF |TLF |NVB | X  | X  |POL |1SHOT| */
+#define DS1621_REG_CONFIG_NVB		0x10
+#define DS1621_REG_CONFIG_POLARITY	0x02
+#define DS1621_REG_CONFIG_1SHOT		0x01
+#define DS1621_REG_CONFIG_DONE		0x80
+
+/* The DS1621 registers */
+#define DS1621_REG_TEMP			0xAA /* word, RO */
+#define DS1621_REG_TEMP_MIN		0xA1 /* word, RW */
+#define DS1621_REG_TEMP_MAX		0xA2 /* word, RW */
+#define DS1621_REG_CONF			0xAC /* byte, RW */
+#define DS1621_COM_START		0xEE /* no data */
+#define DS1621_COM_STOP			0x22 /* no data */
+
+/* The DS1621 configuration register */
+#define DS1621_ALARM_TEMP_HIGH		0x40
+#define DS1621_ALARM_TEMP_LOW		0x20
+
+/* Conversions. Rounding and limit checking is only done on the TO_REG
+   variants. Note that you should be a bit careful with which arguments
+   these macros are called: arguments may be evaluated more than once.
+   Fixing this is just not worth it. */
+#define ALARMS_FROM_REG(val) ((val) & \
+                              (DS1621_ALARM_TEMP_HIGH | DS1621_ALARM_TEMP_LOW))
+
+/* Each client has this additional data */
+struct ds1621_data {
+	struct i2c_client client;
+	struct semaphore update_lock;
+	char valid;			/* !=0 if following fields are valid */
+	unsigned long last_updated;	/* In jiffies */
+
+	u16 temp, temp_min, temp_max;	/* Register values, word */
+	u8 conf;			/* Register encoding, combined */
+};
+
+static int ds1621_attach_adapter(struct i2c_adapter *adapter);
+static int ds1621_detect(struct i2c_adapter *adapter, int address,
+			 int kind);
+static void ds1621_init_client(struct i2c_client *client);
+static int ds1621_detach_client(struct i2c_client *client);
+static struct ds1621_data *ds1621_update_client(struct device *dev);
+
+/* This is the driver that will be inserted */
+static struct i2c_driver ds1621_driver = {
+	.owner		= THIS_MODULE,
+	.name		= "ds1621",
+	.id		= I2C_DRIVERID_DS1621,
+	.flags		= I2C_DF_NOTIFY,
+	.attach_adapter	= ds1621_attach_adapter,
+	.detach_client	= ds1621_detach_client,
+};
+
+/* All registers are word-sized, except for the configuration register.
+   DS1621 uses a high-byte first convention, which is exactly opposite to
+   the usual practice. */
+static int ds1621_read_value(struct i2c_client *client, u8 reg)
+{
+	if (reg == DS1621_REG_CONF)
+		return i2c_smbus_read_byte_data(client, reg);
+	else
+		return swab16(i2c_smbus_read_word_data(client, reg));
+}
+
+/* All registers are word-sized, except for the configuration register.
+   DS1621 uses a high-byte first convention, which is exactly opposite to
+   the usual practice. */
+static int ds1621_write_value(struct i2c_client *client, u8 reg, u16 value)
+{
+	if (reg == DS1621_REG_CONF)
+		return i2c_smbus_write_byte_data(client, reg, value);
+	else
+		return i2c_smbus_write_word_data(client, reg, swab16(value));
+}
+
+static void ds1621_init_client(struct i2c_client *client)
+{
+	int reg = ds1621_read_value(client, DS1621_REG_CONF);
+	/* switch to continous conversion mode */
+	reg &= ~ DS1621_REG_CONFIG_1SHOT;
+
+	/* setup output polarity */
+	if (polarity == 0)
+		reg &= ~DS1621_REG_CONFIG_POLARITY;
+	else if (polarity == 1)
+		reg |= DS1621_REG_CONFIG_POLARITY;
+	
+	ds1621_write_value(client, DS1621_REG_CONF, reg);
+	
+	/* start conversion */
+	i2c_smbus_write_byte(client, DS1621_COM_START);
+}
+
+#define show(value)							\
+static ssize_t show_##value(struct device *dev, char *buf)		\
+{									\
+	struct ds1621_data *data = ds1621_update_client(dev);		\
+	return sprintf(buf, "%d\n", LM75_TEMP_FROM_REG(data->value));	\
+}
+
+show(temp);
+show(temp_min);
+show(temp_max);
+
+#define set_temp(suffix, value, reg)					\
+static ssize_t set_temp_##suffix(struct device *dev, const char *buf,	\
+				 size_t count)				\
+{									\
+	struct i2c_client *client = to_i2c_client(dev);			\
+	struct ds1621_data *data = ds1621_update_client(dev);		\
+	u16 val = LM75_TEMP_TO_REG(simple_strtoul(buf, NULL, 10));	\
+									\
+	down(&data->update_lock);					\
+	data->value = val;						\
+	ds1621_write_value(client, reg, data->value);			\
+	up(&data->update_lock);						\
+	return count;							\
+}
+
+set_temp(min, temp_min, DS1621_REG_TEMP_MIN);
+set_temp(max, temp_max, DS1621_REG_TEMP_MAX);
+
+static ssize_t show_alarms(struct device *dev, char *buf)
+{
+	struct ds1621_data *data = ds1621_update_client(dev);
+	return sprintf(buf, "%d\n", ALARMS_FROM_REG(data->conf));
+}
+
+static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL);
+static DEVICE_ATTR(temp1_input, S_IRUGO , show_temp, NULL);
+static DEVICE_ATTR(temp1_min, S_IWUSR | S_IRUGO , show_temp_min, set_temp_min);
+static DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO, show_temp_max, set_temp_max);
+
+
+static int ds1621_attach_adapter(struct i2c_adapter *adapter)
+{
+	return i2c_detect(adapter, &addr_data, ds1621_detect);
+}
+
+/* This function is called by i2c_detect */
+int ds1621_detect(struct i2c_adapter *adapter, int address,
+                  int kind)
+{
+	int conf, temp;
+	struct i2c_client *new_client;
+	struct ds1621_data *data;
+	int err = 0;
+
+	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA 
+				     | I2C_FUNC_SMBUS_WORD_DATA 
+				     | I2C_FUNC_SMBUS_WRITE_BYTE))
+		goto exit;
+
+	/* OK. For now, we presume we have a valid client. We now create the
+	   client structure, even though we cannot fill it completely yet.
+	   But it allows us to access ds1621_{read,write}_value. */
+	if (!(data = kmalloc(sizeof(struct ds1621_data), GFP_KERNEL))) {
+		err = -ENOMEM;
+		goto exit;
+	}
+	memset(data, 0, sizeof(struct ds1621_data));
+	
+	new_client = &data->client;
+	i2c_set_clientdata(new_client, data);
+	new_client->addr = address;
+	new_client->adapter = adapter;
+	new_client->driver = &ds1621_driver;
+	new_client->flags = 0;
+
+
+	/* Now, we do the remaining detection. It is lousy. */
+	if (kind < 0) {
+		/* The NVB bit should be low if no EEPROM write has been 
+		   requested during the latest 10ms, which is highly 
+		   improbable in our case. */
+		conf = ds1621_read_value(new_client, DS1621_REG_CONF);
+		if (conf & DS1621_REG_CONFIG_NVB)
+			goto exit_free;
+		/* The 7 lowest bits of a temperature should always be 0. */
+		temp = ds1621_read_value(new_client, DS1621_REG_TEMP);
+		if (temp & 0x007f)
+			goto exit_free;
+		temp = ds1621_read_value(new_client, DS1621_REG_TEMP_MIN);
+		if (temp & 0x007f)
+			goto exit_free;
+		temp = ds1621_read_value(new_client, DS1621_REG_TEMP_MAX);
+		if (temp & 0x007f)
+			goto exit_free;
+	}
+
+	/* Determine the chip type - only one kind supported! */
+	if (kind <= 0)
+		kind = ds1621;
+
+	/* Fill in remaining client fields and put it into the global list */
+	strlcpy(new_client->name, "ds1621", I2C_NAME_SIZE);
+	data->valid = 0;
+	init_MUTEX(&data->update_lock);
+
+	/* Tell the I2C layer a new client has arrived */
+	if ((err = i2c_attach_client(new_client)))
+		goto exit_free;
+
+	/* Initialize the DS1621 chip */
+	ds1621_init_client(new_client);
+
+	/* Register sysfs hooks */
+	device_create_file(&new_client->dev, &dev_attr_alarms);
+	device_create_file(&new_client->dev, &dev_attr_temp1_input);
+	device_create_file(&new_client->dev, &dev_attr_temp1_min);
+	device_create_file(&new_client->dev, &dev_attr_temp1_max);
+	
+	return 0;
+
+/* OK, this is not exactly good programming practice, usually. But it is
+   very code-efficient in this case. */
+      exit_free:
+	kfree(data);
+      exit:
+	return err;
+}
+
+static int ds1621_detach_client(struct i2c_client *client)
+{
+	int err;
+
+	if ((err = i2c_detach_client(client))) {
+		dev_err(&client->dev, "Client deregistration failed, "
+			"client not detached.\n");
+		return err;
+	}
+
+	kfree(i2c_get_clientdata(client));
+
+	return 0;
+}
+
+
+static struct ds1621_data *ds1621_update_client(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct ds1621_data *data = i2c_get_clientdata(client);
+	u8 new_conf;
+
+	down(&data->update_lock);
+
+	if (time_after(jiffies, data->last_updated + HZ + HZ / 2)
+	    || !data->valid) {
+
+		dev_dbg(&client->dev, "Starting ds1621 update\n");
+
+		data->conf = ds1621_read_value(client, DS1621_REG_CONF);
+
+		data->temp = ds1621_read_value(client, DS1621_REG_TEMP);
+		
+		data->temp_min = ds1621_read_value(client,
+		                                    DS1621_REG_TEMP_MIN);
+		data->temp_max = ds1621_read_value(client,
+						    DS1621_REG_TEMP_MAX);
+
+		/* reset alarms if neccessary */
+		new_conf = data->conf;
+		if (data->temp < data->temp_min)
+			new_conf &= ~DS1621_ALARM_TEMP_LOW;
+		if (data->temp > data->temp_max)
+			new_conf &= ~DS1621_ALARM_TEMP_HIGH;
+		if (data->conf != new_conf)
+			ds1621_write_value(client, DS1621_REG_CONF,
+					   new_conf);
+
+		data->last_updated = jiffies;
+		data->valid = 1;
+	}
+
+	up(&data->update_lock);
+
+	return data;
+}
+
+static int __init ds1621_init(void)
+{
+	return i2c_add_driver(&ds1621_driver);
+}
+
+static void __exit ds1621_exit(void)
+{
+	i2c_del_driver(&ds1621_driver);
+}
+
+
+MODULE_AUTHOR("Christian W. Zuckschwerdt <zany@triq.net>");
+MODULE_DESCRIPTION("DS1621 driver");
+MODULE_LICENSE("GPL");
+
+module_init(ds1621_init);
+module_exit(ds1621_exit);
diff --git a/drivers/i2c/chips/eeprom.c b/drivers/i2c/chips/eeprom.c
new file mode 100644
index 00000000000..cbdfa2db6f7
--- /dev/null
+++ b/drivers/i2c/chips/eeprom.c
@@ -0,0 +1,264 @@
+/*
+    eeprom.c - Part of lm_sensors, Linux kernel modules for hardware
+               monitoring
+    Copyright (C) 1998, 1999  Frodo Looijaard <frodol@dds.nl> and
+			       Philip Edelbrock <phil@netroedge.com>
+    Copyright (C) 2003 Greg Kroah-Hartman <greg@kroah.com>
+    Copyright (C) 2003 IBM Corp.
+
+    2004-01-16  Jean Delvare <khali@linux-fr.org>
+    Divide the eeprom in 32-byte (arbitrary) slices. This significantly
+    speeds sensors up, as well as various scripts using the eeprom
+    module.
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/sched.h>
+#include <linux/jiffies.h>
+#include <linux/i2c.h>
+#include <linux/i2c-sensor.h>
+
+/* Addresses to scan */
+static unsigned short normal_i2c[] = { 0x50, 0x51, 0x52, 0x53, 0x54,
+					0x55, 0x56, 0x57, I2C_CLIENT_END };
+static unsigned int normal_isa[] = { I2C_CLIENT_ISA_END };
+
+/* Insmod parameters */
+SENSORS_INSMOD_1(eeprom);
+
+
+/* Size of EEPROM in bytes */
+#define EEPROM_SIZE		256
+
+/* possible types of eeprom devices */
+enum eeprom_nature {
+	UNKNOWN,
+	VAIO,
+};
+
+/* Each client has this additional data */
+struct eeprom_data {
+	struct i2c_client client;
+	struct semaphore update_lock;
+	u8 valid;			/* bitfield, bit!=0 if slice is valid */
+	unsigned long last_updated[8];	/* In jiffies, 8 slices */
+	u8 data[EEPROM_SIZE];		/* Register values */
+	enum eeprom_nature nature;
+};
+
+
+static int eeprom_attach_adapter(struct i2c_adapter *adapter);
+static int eeprom_detect(struct i2c_adapter *adapter, int address, int kind);
+static int eeprom_detach_client(struct i2c_client *client);
+
+/* This is the driver that will be inserted */
+static struct i2c_driver eeprom_driver = {
+	.owner		= THIS_MODULE,
+	.name		= "eeprom",
+	.id		= I2C_DRIVERID_EEPROM,
+	.flags		= I2C_DF_NOTIFY,
+	.attach_adapter	= eeprom_attach_adapter,
+	.detach_client	= eeprom_detach_client,
+};
+
+static void eeprom_update_client(struct i2c_client *client, u8 slice)
+{
+	struct eeprom_data *data = i2c_get_clientdata(client);
+	int i, j;
+
+	down(&data->update_lock);
+
+	if (!(data->valid & (1 << slice)) ||
+	    time_after(jiffies, data->last_updated[slice] + 300 * HZ)) {
+		dev_dbg(&client->dev, "Starting eeprom update, slice %u\n", slice);
+
+		if (i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_READ_I2C_BLOCK)) {
+			for (i = slice << 5; i < (slice + 1) << 5; i += I2C_SMBUS_I2C_BLOCK_MAX)
+				if (i2c_smbus_read_i2c_block_data(client, i, data->data + i) != I2C_SMBUS_I2C_BLOCK_MAX)
+					goto exit;
+		} else {
+			if (i2c_smbus_write_byte(client, slice << 5)) {
+				dev_dbg(&client->dev, "eeprom read start has failed!\n");
+				goto exit;
+			}
+			for (i = slice << 5; i < (slice + 1) << 5; i++) {
+				j = i2c_smbus_read_byte(client);
+				if (j < 0)
+					goto exit;
+				data->data[i] = (u8) j;
+			}
+		}
+		data->last_updated[slice] = jiffies;
+		data->valid |= (1 << slice);
+	}
+exit:
+	up(&data->update_lock);
+}
+
+static ssize_t eeprom_read(struct kobject *kobj, char *buf, loff_t off, size_t count)
+{
+	struct i2c_client *client = to_i2c_client(container_of(kobj, struct device, kobj));
+	struct eeprom_data *data = i2c_get_clientdata(client);
+	u8 slice;
+
+	if (off > EEPROM_SIZE)
+		return 0;
+	if (off + count > EEPROM_SIZE)
+		count = EEPROM_SIZE - off;
+
+	/* Only refresh slices which contain requested bytes */
+	for (slice = off >> 5; slice <= (off + count - 1) >> 5; slice++)
+		eeprom_update_client(client, slice);
+
+	/* Hide Vaio security settings to regular users (16 first bytes) */
+	if (data->nature == VAIO && off < 16 && !capable(CAP_SYS_ADMIN)) {
+		size_t in_row1 = 16 - off;
+		in_row1 = min(in_row1, count);
+		memset(buf, 0, in_row1);
+		if (count - in_row1 > 0)
+			memcpy(buf + in_row1, &data->data[16], count - in_row1);
+	} else {
+		memcpy(buf, &data->data[off], count);
+	}
+
+	return count;
+}
+
+static struct bin_attribute eeprom_attr = {
+	.attr = {
+		.name = "eeprom",
+		.mode = S_IRUGO,
+		.owner = THIS_MODULE,
+	},
+	.size = EEPROM_SIZE,
+	.read = eeprom_read,
+};
+
+static int eeprom_attach_adapter(struct i2c_adapter *adapter)
+{
+	return i2c_detect(adapter, &addr_data, eeprom_detect);
+}
+
+/* This function is called by i2c_detect */
+int eeprom_detect(struct i2c_adapter *adapter, int address, int kind)
+{
+	struct i2c_client *new_client;
+	struct eeprom_data *data;
+	int err = 0;
+
+	/* There are three ways we can read the EEPROM data:
+	   (1) I2C block reads (faster, but unsupported by most adapters)
+	   (2) Consecutive byte reads (100% overhead)
+	   (3) Regular byte data reads (200% overhead)
+	   The third method is not implemented by this driver because all
+	   known adapters support at least the second. */
+	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_READ_BYTE_DATA
+					    | I2C_FUNC_SMBUS_BYTE))
+		goto exit;
+
+	/* OK. For now, we presume we have a valid client. We now create the
+	   client structure, even though we cannot fill it completely yet.
+	   But it allows us to access eeprom_{read,write}_value. */
+	if (!(data = kmalloc(sizeof(struct eeprom_data), GFP_KERNEL))) {
+		err = -ENOMEM;
+		goto exit;
+	}
+	memset(data, 0, sizeof(struct eeprom_data));
+
+	new_client = &data->client;
+	memset(data->data, 0xff, EEPROM_SIZE);
+	i2c_set_clientdata(new_client, data);
+	new_client->addr = address;
+	new_client->adapter = adapter;
+	new_client->driver = &eeprom_driver;
+	new_client->flags = 0;
+
+	/* prevent 24RF08 corruption */
+	i2c_smbus_write_quick(new_client, 0);
+
+	/* Fill in the remaining client fields */
+	strlcpy(new_client->name, "eeprom", I2C_NAME_SIZE);
+	data->valid = 0;
+	init_MUTEX(&data->update_lock);
+	data->nature = UNKNOWN;
+
+	/* Tell the I2C layer a new client has arrived */
+	if ((err = i2c_attach_client(new_client)))
+		goto exit_kfree;
+
+	/* Detect the Vaio nature of EEPROMs.
+	   We use the "PCG-" prefix as the signature. */
+	if (address == 0x57) {
+		if (i2c_smbus_read_byte_data(new_client, 0x80) == 'P'
+		 && i2c_smbus_read_byte(new_client) == 'C'
+		 && i2c_smbus_read_byte(new_client) == 'G'
+		 && i2c_smbus_read_byte(new_client) == '-') {
+			dev_info(&new_client->dev, "Vaio EEPROM detected, "
+				"enabling password protection\n");
+			data->nature = VAIO;
+		}
+	}
+
+	/* create the sysfs eeprom file */
+	sysfs_create_bin_file(&new_client->dev.kobj, &eeprom_attr);
+
+	return 0;
+
+exit_kfree:
+	kfree(data);
+exit:
+	return err;
+}
+
+static int eeprom_detach_client(struct i2c_client *client)
+{
+	int err;
+
+	err = i2c_detach_client(client);
+	if (err) {
+		dev_err(&client->dev, "Client deregistration failed, client not detached.\n");
+		return err;
+	}
+
+	kfree(i2c_get_clientdata(client));
+
+	return 0;
+}
+
+static int __init eeprom_init(void)
+{
+	return i2c_add_driver(&eeprom_driver);
+}
+
+static void __exit eeprom_exit(void)
+{
+	i2c_del_driver(&eeprom_driver);
+}
+
+
+MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl> and "
+		"Philip Edelbrock <phil@netroedge.com> and "
+		"Greg Kroah-Hartman <greg@kroah.com>");
+MODULE_DESCRIPTION("I2C EEPROM driver");
+MODULE_LICENSE("GPL");
+
+module_init(eeprom_init);
+module_exit(eeprom_exit);
diff --git a/drivers/i2c/chips/fscher.c b/drivers/i2c/chips/fscher.c
new file mode 100644
index 00000000000..18e33ac59d0
--- /dev/null
+++ b/drivers/i2c/chips/fscher.c
@@ -0,0 +1,692 @@
+/*
+ * fscher.c - Part of lm_sensors, Linux kernel modules for hardware
+ * monitoring
+ * Copyright (C) 2003, 2004 Reinhard Nissl <rnissl@gmx.de>
+ * 
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ * 
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ * 
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+/* 
+ *  fujitsu siemens hermes chip, 
+ *  module based on fscpos.c 
+ *  Copyright (C) 2000 Hermann Jung <hej@odn.de>
+ *  Copyright (C) 1998, 1999 Frodo Looijaard <frodol@dds.nl>
+ *  and Philip Edelbrock <phil@netroedge.com>
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/jiffies.h>
+#include <linux/i2c.h>
+#include <linux/i2c-sensor.h>
+
+/*
+ * Addresses to scan
+ */
+
+static unsigned short normal_i2c[] = { 0x73, I2C_CLIENT_END };
+static unsigned int normal_isa[] = { I2C_CLIENT_ISA_END };
+
+/*
+ * Insmod parameters
+ */
+
+SENSORS_INSMOD_1(fscher);
+
+/*
+ * The FSCHER registers
+ */
+
+/* chip identification */
+#define FSCHER_REG_IDENT_0		0x00
+#define FSCHER_REG_IDENT_1		0x01
+#define FSCHER_REG_IDENT_2		0x02
+#define FSCHER_REG_REVISION		0x03
+
+/* global control and status */
+#define FSCHER_REG_EVENT_STATE		0x04
+#define FSCHER_REG_CONTROL		0x05
+
+/* watchdog */
+#define FSCHER_REG_WDOG_PRESET		0x28
+#define FSCHER_REG_WDOG_STATE		0x23
+#define FSCHER_REG_WDOG_CONTROL		0x21
+
+/* fan 0 */
+#define FSCHER_REG_FAN0_MIN		0x55
+#define FSCHER_REG_FAN0_ACT		0x0e
+#define FSCHER_REG_FAN0_STATE		0x0d
+#define FSCHER_REG_FAN0_RIPPLE		0x0f
+
+/* fan 1 */
+#define FSCHER_REG_FAN1_MIN		0x65
+#define FSCHER_REG_FAN1_ACT		0x6b
+#define FSCHER_REG_FAN1_STATE		0x62
+#define FSCHER_REG_FAN1_RIPPLE		0x6f
+
+/* fan 2 */
+#define FSCHER_REG_FAN2_MIN		0xb5
+#define FSCHER_REG_FAN2_ACT		0xbb
+#define FSCHER_REG_FAN2_STATE		0xb2
+#define FSCHER_REG_FAN2_RIPPLE		0xbf
+
+/* voltage supervision */
+#define FSCHER_REG_VOLT_12		0x45
+#define FSCHER_REG_VOLT_5		0x42
+#define FSCHER_REG_VOLT_BATT		0x48
+
+/* temperature 0 */
+#define FSCHER_REG_TEMP0_ACT		0x64
+#define FSCHER_REG_TEMP0_STATE		0x71
+
+/* temperature 1 */
+#define FSCHER_REG_TEMP1_ACT		0x32
+#define FSCHER_REG_TEMP1_STATE		0x81
+
+/* temperature 2 */
+#define FSCHER_REG_TEMP2_ACT		0x35
+#define FSCHER_REG_TEMP2_STATE		0x91
+
+/*
+ * Functions declaration
+ */
+
+static int fscher_attach_adapter(struct i2c_adapter *adapter);
+static int fscher_detect(struct i2c_adapter *adapter, int address, int kind);
+static int fscher_detach_client(struct i2c_client *client);
+static struct fscher_data *fscher_update_device(struct device *dev);
+static void fscher_init_client(struct i2c_client *client);
+
+static int fscher_read_value(struct i2c_client *client, u8 reg);
+static int fscher_write_value(struct i2c_client *client, u8 reg, u8 value);
+
+/*
+ * Driver data (common to all clients)
+ */
+ 
+static struct i2c_driver fscher_driver = {
+	.owner		= THIS_MODULE,
+	.name		= "fscher",
+	.id		= I2C_DRIVERID_FSCHER,
+	.flags		= I2C_DF_NOTIFY,
+	.attach_adapter	= fscher_attach_adapter,
+	.detach_client	= fscher_detach_client,
+};
+
+/*
+ * Client data (each client gets its own)
+ */
+
+struct fscher_data {
+	struct i2c_client client;
+	struct semaphore update_lock;
+	char valid; /* zero until following fields are valid */
+	unsigned long last_updated; /* in jiffies */
+
+	/* register values */
+	u8 revision;		/* revision of chip */
+	u8 global_event;	/* global event status */
+	u8 global_control;	/* global control register */
+	u8 watchdog[3];		/* watchdog */
+	u8 volt[3];		/* 12, 5, battery voltage */ 
+	u8 temp_act[3];		/* temperature */
+	u8 temp_status[3];	/* status of sensor */
+	u8 fan_act[3];		/* fans revolutions per second */
+	u8 fan_status[3];	/* fan status */
+	u8 fan_min[3];		/* fan min value for rps */
+	u8 fan_ripple[3];	/* divider for rps */
+};
+
+/*
+ * Sysfs stuff
+ */
+
+#define sysfs_r(kind, sub, offset, reg) \
+static ssize_t show_##kind##sub (struct fscher_data *, char *, int); \
+static ssize_t show_##kind##offset##sub (struct device *, char *); \
+static ssize_t show_##kind##offset##sub (struct device *dev, char *buf) \
+{ \
+	struct fscher_data *data = fscher_update_device(dev); \
+	return show_##kind##sub(data, buf, (offset)); \
+}
+
+#define sysfs_w(kind, sub, offset, reg) \
+static ssize_t set_##kind##sub (struct i2c_client *, struct fscher_data *, const char *, size_t, int, int); \
+static ssize_t set_##kind##offset##sub (struct device *, const char *, size_t); \
+static ssize_t set_##kind##offset##sub (struct device *dev, const char *buf, size_t count) \
+{ \
+	struct i2c_client *client = to_i2c_client(dev); \
+	struct fscher_data *data = i2c_get_clientdata(client); \
+	return set_##kind##sub(client, data, buf, count, (offset), reg); \
+}
+
+#define sysfs_rw_n(kind, sub, offset, reg) \
+sysfs_r(kind, sub, offset, reg) \
+sysfs_w(kind, sub, offset, reg) \
+static DEVICE_ATTR(kind##offset##sub, S_IRUGO | S_IWUSR, show_##kind##offset##sub, set_##kind##offset##sub);
+
+#define sysfs_rw(kind, sub, reg) \
+sysfs_r(kind, sub, 0, reg) \
+sysfs_w(kind, sub, 0, reg) \
+static DEVICE_ATTR(kind##sub, S_IRUGO | S_IWUSR, show_##kind##0##sub, set_##kind##0##sub);
+
+#define sysfs_ro_n(kind, sub, offset, reg) \
+sysfs_r(kind, sub, offset, reg) \
+static DEVICE_ATTR(kind##offset##sub, S_IRUGO, show_##kind##offset##sub, NULL);
+
+#define sysfs_ro(kind, sub, reg) \
+sysfs_r(kind, sub, 0, reg) \
+static DEVICE_ATTR(kind, S_IRUGO, show_##kind##0##sub, NULL);
+
+#define sysfs_fan(offset, reg_status, reg_min, reg_ripple, reg_act) \
+sysfs_rw_n(pwm,        , offset, reg_min) \
+sysfs_rw_n(fan, _status, offset, reg_status) \
+sysfs_rw_n(fan, _div   , offset, reg_ripple) \
+sysfs_ro_n(fan, _input , offset, reg_act)
+
+#define sysfs_temp(offset, reg_status, reg_act) \
+sysfs_rw_n(temp, _status, offset, reg_status) \
+sysfs_ro_n(temp, _input , offset, reg_act)
+    
+#define sysfs_in(offset, reg_act) \
+sysfs_ro_n(in, _input, offset, reg_act)
+
+#define sysfs_revision(reg_revision) \
+sysfs_ro(revision, , reg_revision)
+
+#define sysfs_alarms(reg_events) \
+sysfs_ro(alarms, , reg_events)
+
+#define sysfs_control(reg_control) \
+sysfs_rw(control, , reg_control)
+
+#define sysfs_watchdog(reg_control, reg_status, reg_preset) \
+sysfs_rw(watchdog, _control, reg_control) \
+sysfs_rw(watchdog, _status , reg_status) \
+sysfs_rw(watchdog, _preset , reg_preset)
+
+sysfs_fan(1, FSCHER_REG_FAN0_STATE, FSCHER_REG_FAN0_MIN,
+	     FSCHER_REG_FAN0_RIPPLE, FSCHER_REG_FAN0_ACT)
+sysfs_fan(2, FSCHER_REG_FAN1_STATE, FSCHER_REG_FAN1_MIN,
+	     FSCHER_REG_FAN1_RIPPLE, FSCHER_REG_FAN1_ACT)
+sysfs_fan(3, FSCHER_REG_FAN2_STATE, FSCHER_REG_FAN2_MIN,
+	     FSCHER_REG_FAN2_RIPPLE, FSCHER_REG_FAN2_ACT)
+
+sysfs_temp(1, FSCHER_REG_TEMP0_STATE, FSCHER_REG_TEMP0_ACT)
+sysfs_temp(2, FSCHER_REG_TEMP1_STATE, FSCHER_REG_TEMP1_ACT)
+sysfs_temp(3, FSCHER_REG_TEMP2_STATE, FSCHER_REG_TEMP2_ACT)
+
+sysfs_in(0, FSCHER_REG_VOLT_12)
+sysfs_in(1, FSCHER_REG_VOLT_5)
+sysfs_in(2, FSCHER_REG_VOLT_BATT)
+
+sysfs_revision(FSCHER_REG_REVISION)
+sysfs_alarms(FSCHER_REG_EVENTS)
+sysfs_control(FSCHER_REG_CONTROL)
+sysfs_watchdog(FSCHER_REG_WDOG_CONTROL, FSCHER_REG_WDOG_STATE, FSCHER_REG_WDOG_PRESET)
+  
+#define device_create_file_fan(client, offset) \
+do { \
+	device_create_file(&client->dev, &dev_attr_fan##offset##_status); \
+	device_create_file(&client->dev, &dev_attr_pwm##offset); \
+	device_create_file(&client->dev, &dev_attr_fan##offset##_div); \
+	device_create_file(&client->dev, &dev_attr_fan##offset##_input); \
+} while (0)
+
+#define device_create_file_temp(client, offset) \
+do { \
+	device_create_file(&client->dev, &dev_attr_temp##offset##_status); \
+	device_create_file(&client->dev, &dev_attr_temp##offset##_input); \
+} while (0)
+
+#define device_create_file_in(client, offset) \
+do { \
+	device_create_file(&client->dev, &dev_attr_in##offset##_input); \
+} while (0)
+
+#define device_create_file_revision(client) \
+do { \
+	device_create_file(&client->dev, &dev_attr_revision); \
+} while (0)
+
+#define device_create_file_alarms(client) \
+do { \
+	device_create_file(&client->dev, &dev_attr_alarms); \
+} while (0)
+
+#define device_create_file_control(client) \
+do { \
+	device_create_file(&client->dev, &dev_attr_control); \
+} while (0)
+
+#define device_create_file_watchdog(client) \
+do { \
+	device_create_file(&client->dev, &dev_attr_watchdog_status); \
+	device_create_file(&client->dev, &dev_attr_watchdog_control); \
+	device_create_file(&client->dev, &dev_attr_watchdog_preset); \
+} while (0)
+  
+/*
+ * Real code
+ */
+
+static int fscher_attach_adapter(struct i2c_adapter *adapter)
+{
+	if (!(adapter->class & I2C_CLASS_HWMON))
+		return 0;
+	return i2c_detect(adapter, &addr_data, fscher_detect);
+}
+
+static int fscher_detect(struct i2c_adapter *adapter, int address, int kind)
+{
+	struct i2c_client *new_client;
+	struct fscher_data *data;
+	int err = 0;
+
+	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
+		goto exit;
+
+	/* OK. For now, we presume we have a valid client. We now create the
+	 * client structure, even though we cannot fill it completely yet.
+	 * But it allows us to access i2c_smbus_read_byte_data. */
+	if (!(data = kmalloc(sizeof(struct fscher_data), GFP_KERNEL))) {
+		err = -ENOMEM;
+		goto exit;
+  	}
+	memset(data, 0, sizeof(struct fscher_data));
+
+	/* The common I2C client data is placed right before the
+	 * Hermes-specific data. */
+	new_client = &data->client;
+	i2c_set_clientdata(new_client, data);
+	new_client->addr = address;
+	new_client->adapter = adapter;
+	new_client->driver = &fscher_driver;
+	new_client->flags = 0;
+
+	/* Do the remaining detection unless force or force_fscher parameter */
+	if (kind < 0) {
+		if ((i2c_smbus_read_byte_data(new_client,
+		     FSCHER_REG_IDENT_0) != 0x48)	/* 'H' */
+		 || (i2c_smbus_read_byte_data(new_client,
+		     FSCHER_REG_IDENT_1) != 0x45)	/* 'E' */
+		 || (i2c_smbus_read_byte_data(new_client,
+		     FSCHER_REG_IDENT_2) != 0x52))	/* 'R' */
+			goto exit_free;
+	}
+
+	/* Fill in the remaining client fields and put it into the
+	 * global list */
+	strlcpy(new_client->name, "fscher", I2C_NAME_SIZE);
+	data->valid = 0;
+	init_MUTEX(&data->update_lock);
+
+	/* Tell the I2C layer a new client has arrived */
+	if ((err = i2c_attach_client(new_client)))
+		goto exit_free;
+
+	fscher_init_client(new_client);
+
+	/* Register sysfs hooks */
+	device_create_file_revision(new_client);
+	device_create_file_alarms(new_client);
+	device_create_file_control(new_client);
+	device_create_file_watchdog(new_client);
+
+	device_create_file_in(new_client, 0);
+	device_create_file_in(new_client, 1);
+	device_create_file_in(new_client, 2);
+
+	device_create_file_fan(new_client, 1);
+	device_create_file_fan(new_client, 2);
+	device_create_file_fan(new_client, 3);
+
+	device_create_file_temp(new_client, 1);
+	device_create_file_temp(new_client, 2);
+	device_create_file_temp(new_client, 3);
+
+	return 0;
+
+exit_free:
+	kfree(data);
+exit:
+	return err;
+}
+
+static int fscher_detach_client(struct i2c_client *client)
+{
+	int err;
+
+	if ((err = i2c_detach_client(client))) {
+		dev_err(&client->dev, "Client deregistration failed, "
+			"client not detached.\n");
+		return err;
+	}
+
+	kfree(i2c_get_clientdata(client));
+	return 0;
+}
+
+static int fscher_read_value(struct i2c_client *client, u8 reg)
+{
+	dev_dbg(&client->dev, "read reg 0x%02x\n", reg);
+
+	return i2c_smbus_read_byte_data(client, reg);
+}
+
+static int fscher_write_value(struct i2c_client *client, u8 reg, u8 value)
+{
+	dev_dbg(&client->dev, "write reg 0x%02x, val 0x%02x\n",
+		reg, value);
+
+	return i2c_smbus_write_byte_data(client, reg, value);
+}
+
+/* Called when we have found a new FSC Hermes. */
+static void fscher_init_client(struct i2c_client *client)
+{
+	struct fscher_data *data = i2c_get_clientdata(client);
+
+	/* Read revision from chip */
+	data->revision =  fscher_read_value(client, FSCHER_REG_REVISION);
+}
+
+static struct fscher_data *fscher_update_device(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct fscher_data *data = i2c_get_clientdata(client);
+
+	down(&data->update_lock);
+
+	if (time_after(jiffies, data->last_updated + 2 * HZ) || !data->valid) {
+
+		dev_dbg(&client->dev, "Starting fscher update\n");
+
+		data->temp_act[0] = fscher_read_value(client, FSCHER_REG_TEMP0_ACT);
+		data->temp_act[1] = fscher_read_value(client, FSCHER_REG_TEMP1_ACT);
+		data->temp_act[2] = fscher_read_value(client, FSCHER_REG_TEMP2_ACT);
+		data->temp_status[0] = fscher_read_value(client, FSCHER_REG_TEMP0_STATE);
+		data->temp_status[1] = fscher_read_value(client, FSCHER_REG_TEMP1_STATE);
+		data->temp_status[2] = fscher_read_value(client, FSCHER_REG_TEMP2_STATE);
+
+		data->volt[0] = fscher_read_value(client, FSCHER_REG_VOLT_12);
+		data->volt[1] = fscher_read_value(client, FSCHER_REG_VOLT_5);
+		data->volt[2] = fscher_read_value(client, FSCHER_REG_VOLT_BATT);
+
+		data->fan_act[0] = fscher_read_value(client, FSCHER_REG_FAN0_ACT);
+		data->fan_act[1] = fscher_read_value(client, FSCHER_REG_FAN1_ACT);
+		data->fan_act[2] = fscher_read_value(client, FSCHER_REG_FAN2_ACT);
+		data->fan_status[0] = fscher_read_value(client, FSCHER_REG_FAN0_STATE);
+		data->fan_status[1] = fscher_read_value(client, FSCHER_REG_FAN1_STATE);
+		data->fan_status[2] = fscher_read_value(client, FSCHER_REG_FAN2_STATE);
+		data->fan_min[0] = fscher_read_value(client, FSCHER_REG_FAN0_MIN);
+		data->fan_min[1] = fscher_read_value(client, FSCHER_REG_FAN1_MIN);
+		data->fan_min[2] = fscher_read_value(client, FSCHER_REG_FAN2_MIN);
+		data->fan_ripple[0] = fscher_read_value(client, FSCHER_REG_FAN0_RIPPLE);
+		data->fan_ripple[1] = fscher_read_value(client, FSCHER_REG_FAN1_RIPPLE);
+		data->fan_ripple[2] = fscher_read_value(client, FSCHER_REG_FAN2_RIPPLE);
+
+		data->watchdog[0] = fscher_read_value(client, FSCHER_REG_WDOG_PRESET);
+		data->watchdog[1] = fscher_read_value(client, FSCHER_REG_WDOG_STATE);
+		data->watchdog[2] = fscher_read_value(client, FSCHER_REG_WDOG_CONTROL);
+
+		data->global_event = fscher_read_value(client, FSCHER_REG_EVENT_STATE);
+
+		data->last_updated = jiffies;
+		data->valid = 1;                 
+	}
+
+	up(&data->update_lock);
+
+	return data;
+}
+
+
+
+#define FAN_INDEX_FROM_NUM(nr)	((nr) - 1)
+
+static ssize_t set_fan_status(struct i2c_client *client, struct fscher_data *data,
+			      const char *buf, size_t count, int nr, int reg)
+{
+	/* bits 0..1, 3..7 reserved => mask with 0x04 */  
+	unsigned long v = simple_strtoul(buf, NULL, 10) & 0x04;
+	
+	down(&data->update_lock);
+	data->fan_status[FAN_INDEX_FROM_NUM(nr)] &= ~v;
+	fscher_write_value(client, reg, v);
+	up(&data->update_lock);
+	return count;
+}
+
+static ssize_t show_fan_status(struct fscher_data *data, char *buf, int nr)
+{
+	/* bits 0..1, 3..7 reserved => mask with 0x04 */  
+	return sprintf(buf, "%u\n", data->fan_status[FAN_INDEX_FROM_NUM(nr)] & 0x04);
+}
+
+static ssize_t set_pwm(struct i2c_client *client, struct fscher_data *data,
+		       const char *buf, size_t count, int nr, int reg)
+{
+	unsigned long v = simple_strtoul(buf, NULL, 10);
+
+	down(&data->update_lock);
+	data->fan_min[FAN_INDEX_FROM_NUM(nr)] = v > 0xff ? 0xff : v;
+	fscher_write_value(client, reg, data->fan_min[FAN_INDEX_FROM_NUM(nr)]);
+	up(&data->update_lock);
+	return count;
+}
+
+static ssize_t show_pwm(struct fscher_data *data, char *buf, int nr)
+{
+	return sprintf(buf, "%u\n", data->fan_min[FAN_INDEX_FROM_NUM(nr)]);
+}
+
+static ssize_t set_fan_div(struct i2c_client *client, struct fscher_data *data,
+			   const char *buf, size_t count, int nr, int reg)
+{
+	/* supported values: 2, 4, 8 */
+	unsigned long v = simple_strtoul(buf, NULL, 10);
+
+	switch (v) {
+	case 2: v = 1; break;
+	case 4: v = 2; break;
+	case 8: v = 3; break;
+	default:
+		dev_err(&client->dev, "fan_div value %ld not "
+			 "supported. Choose one of 2, 4 or 8!\n", v);
+		return -EINVAL;
+	}
+
+	down(&data->update_lock);
+
+	/* bits 2..7 reserved => mask with 0x03 */
+	data->fan_ripple[FAN_INDEX_FROM_NUM(nr)] &= ~0x03;
+	data->fan_ripple[FAN_INDEX_FROM_NUM(nr)] |= v;
+
+	fscher_write_value(client, reg, data->fan_ripple[FAN_INDEX_FROM_NUM(nr)]);
+	up(&data->update_lock);
+	return count;
+}
+
+static ssize_t show_fan_div(struct fscher_data *data, char *buf, int nr)
+{
+	/* bits 2..7 reserved => mask with 0x03 */  
+	return sprintf(buf, "%u\n", 1 << (data->fan_ripple[FAN_INDEX_FROM_NUM(nr)] & 0x03));
+}
+
+#define RPM_FROM_REG(val)	(val*60)
+
+static ssize_t show_fan_input (struct fscher_data *data, char *buf, int nr)
+{
+	return sprintf(buf, "%u\n", RPM_FROM_REG(data->fan_act[FAN_INDEX_FROM_NUM(nr)]));
+}
+
+
+
+#define TEMP_INDEX_FROM_NUM(nr)		((nr) - 1)
+
+static ssize_t set_temp_status(struct i2c_client *client, struct fscher_data *data,
+			       const char *buf, size_t count, int nr, int reg)
+{
+	/* bits 2..7 reserved, 0 read only => mask with 0x02 */  
+	unsigned long v = simple_strtoul(buf, NULL, 10) & 0x02;
+
+	down(&data->update_lock);
+	data->temp_status[TEMP_INDEX_FROM_NUM(nr)] &= ~v;
+	fscher_write_value(client, reg, v);
+	up(&data->update_lock);
+	return count;
+}
+
+static ssize_t show_temp_status(struct fscher_data *data, char *buf, int nr)
+{
+	/* bits 2..7 reserved => mask with 0x03 */
+	return sprintf(buf, "%u\n", data->temp_status[TEMP_INDEX_FROM_NUM(nr)] & 0x03);
+}
+
+#define TEMP_FROM_REG(val)	(((val) - 128) * 1000)
+
+static ssize_t show_temp_input(struct fscher_data *data, char *buf, int nr)
+{
+	return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_act[TEMP_INDEX_FROM_NUM(nr)]));
+}
+
+/*
+ * The final conversion is specified in sensors.conf, as it depends on
+ * mainboard specific values. We export the registers contents as
+ * pseudo-hundredths-of-Volts (range 0V - 2.55V). Not that it makes much
+ * sense per se, but it minimizes the conversions count and keeps the
+ * values within a usual range.
+ */
+#define VOLT_FROM_REG(val)	((val) * 10)
+
+static ssize_t show_in_input(struct fscher_data *data, char *buf, int nr)
+{
+	return sprintf(buf, "%u\n", VOLT_FROM_REG(data->volt[nr]));
+}
+
+
+
+static ssize_t show_revision(struct fscher_data *data, char *buf, int nr)
+{
+	return sprintf(buf, "%u\n", data->revision);
+}
+
+
+
+static ssize_t show_alarms(struct fscher_data *data, char *buf, int nr)
+{
+	/* bits 2, 5..6 reserved => mask with 0x9b */
+	return sprintf(buf, "%u\n", data->global_event & 0x9b);
+}
+
+
+
+static ssize_t set_control(struct i2c_client *client, struct fscher_data *data,
+			   const char *buf, size_t count, int nr, int reg)
+{
+	/* bits 1..7 reserved => mask with 0x01 */  
+	unsigned long v = simple_strtoul(buf, NULL, 10) & 0x01;
+
+	down(&data->update_lock);
+	data->global_control &= ~v;
+	fscher_write_value(client, reg, v);
+	up(&data->update_lock);
+	return count;
+}
+
+static ssize_t show_control(struct fscher_data *data, char *buf, int nr)
+{
+	/* bits 1..7 reserved => mask with 0x01 */
+	return sprintf(buf, "%u\n", data->global_control & 0x01);
+}
+
+
+
+static ssize_t set_watchdog_control(struct i2c_client *client, struct
+				    fscher_data *data, const char *buf, size_t count,
+				    int nr, int reg)
+{
+	/* bits 0..3 reserved => mask with 0xf0 */  
+	unsigned long v = simple_strtoul(buf, NULL, 10) & 0xf0;
+
+	down(&data->update_lock);
+	data->watchdog[2] &= ~0xf0;
+	data->watchdog[2] |= v;
+	fscher_write_value(client, reg, data->watchdog[2]);
+	up(&data->update_lock);
+	return count;
+}
+
+static ssize_t show_watchdog_control(struct fscher_data *data, char *buf, int nr)
+{
+	/* bits 0..3 reserved, bit 5 write only => mask with 0xd0 */
+	return sprintf(buf, "%u\n", data->watchdog[2] & 0xd0);
+}
+
+static ssize_t set_watchdog_status(struct i2c_client *client, struct fscher_data *data,
+				   const char *buf, size_t count, int nr, int reg)
+{
+	/* bits 0, 2..7 reserved => mask with 0x02 */  
+	unsigned long v = simple_strtoul(buf, NULL, 10) & 0x02;
+
+	down(&data->update_lock);
+	data->watchdog[1] &= ~v;
+	fscher_write_value(client, reg, v);
+	up(&data->update_lock);
+	return count;
+}
+
+static ssize_t show_watchdog_status(struct fscher_data *data, char *buf, int nr)
+{
+	/* bits 0, 2..7 reserved => mask with 0x02 */
+	return sprintf(buf, "%u\n", data->watchdog[1] & 0x02);
+}
+
+static ssize_t set_watchdog_preset(struct i2c_client *client, struct fscher_data *data,
+				   const char *buf, size_t count, int nr, int reg)
+{
+	unsigned long v = simple_strtoul(buf, NULL, 10) & 0xff;
+	
+	down(&data->update_lock);
+	data->watchdog[0] = v;
+	fscher_write_value(client, reg, data->watchdog[0]);
+	up(&data->update_lock);
+	return count;
+}
+
+static ssize_t show_watchdog_preset(struct fscher_data *data, char *buf, int nr)
+{
+	return sprintf(buf, "%u\n", data->watchdog[0]);
+}
+
+static int __init sensors_fscher_init(void)
+{
+	return i2c_add_driver(&fscher_driver);
+}
+
+static void __exit sensors_fscher_exit(void)
+{
+	i2c_del_driver(&fscher_driver);
+}
+
+MODULE_AUTHOR("Reinhard Nissl <rnissl@gmx.de>");
+MODULE_DESCRIPTION("FSC Hermes driver");
+MODULE_LICENSE("GPL");
+
+module_init(sensors_fscher_init);
+module_exit(sensors_fscher_exit);
diff --git a/drivers/i2c/chips/fscpos.c b/drivers/i2c/chips/fscpos.c
new file mode 100644
index 00000000000..2cac79145c7
--- /dev/null
+++ b/drivers/i2c/chips/fscpos.c
@@ -0,0 +1,641 @@
+/*
+	fscpos.c - Kernel module for hardware monitoring with FSC Poseidon chips
+	Copyright (C) 2004, 2005 Stefan Ott <stefan@desire.ch>
+
+	This program is free software; you can redistribute it and/or modify
+	it under the terms of the GNU General Public License as published by
+	the Free Software Foundation; either version 2 of the License, or
+	(at your option) any later version.
+
+	This program is distributed in the hope that it will be useful,
+	but WITHOUT ANY WARRANTY; without even the implied warranty of
+	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+	GNU General Public License for more details.
+
+	You should have received a copy of the GNU General Public License
+	along with this program; if not, write to the Free Software
+	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+/*
+	fujitsu siemens poseidon chip,
+	module based on the old fscpos module by Hermann Jung <hej@odn.de> and
+	the fscher module by Reinhard Nissl <rnissl@gmx.de>
+
+	original module based on lm80.c
+	Copyright (C) 1998, 1999 Frodo Looijaard <frodol@dds.nl>
+	and Philip Edelbrock <phil@netroedge.com>
+
+	Thanks to Jean Delvare for reviewing my code and suggesting a lot of
+	improvements.
+*/
+
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/i2c-sensor.h>
+#include <linux/init.h>
+
+/*
+ * Addresses to scan
+ */
+static unsigned short normal_i2c[] = { 0x73, I2C_CLIENT_END };
+static unsigned int normal_isa[] = { I2C_CLIENT_ISA_END };
+
+/*
+ * Insmod parameters
+ */
+SENSORS_INSMOD_1(fscpos);
+
+/*
+ * The FSCPOS registers
+ */
+
+/* chip identification */
+#define FSCPOS_REG_IDENT_0		0x00
+#define FSCPOS_REG_IDENT_1		0x01
+#define FSCPOS_REG_IDENT_2		0x02
+#define FSCPOS_REG_REVISION		0x03
+
+/* global control and status */
+#define FSCPOS_REG_EVENT_STATE		0x04
+#define FSCPOS_REG_CONTROL		0x05
+
+/* watchdog */
+#define FSCPOS_REG_WDOG_PRESET		0x28
+#define FSCPOS_REG_WDOG_STATE		0x23
+#define FSCPOS_REG_WDOG_CONTROL		0x21
+
+/* voltages */
+#define FSCPOS_REG_VOLT_12		0x45
+#define FSCPOS_REG_VOLT_5		0x42
+#define FSCPOS_REG_VOLT_BATT		0x48
+
+/* fans - the chip does not support minimum speed for fan2 */
+static u8 FSCPOS_REG_PWM[] = { 0x55, 0x65 };
+static u8 FSCPOS_REG_FAN_ACT[] = { 0x0e, 0x6b, 0xab };
+static u8 FSCPOS_REG_FAN_STATE[] = { 0x0d, 0x62, 0xa2 };
+static u8 FSCPOS_REG_FAN_RIPPLE[] = { 0x0f, 0x6f, 0xaf };
+
+/* temperatures */
+static u8 FSCPOS_REG_TEMP_ACT[] = { 0x64, 0x32, 0x35 };
+static u8 FSCPOS_REG_TEMP_STATE[] = { 0x71, 0x81, 0x91 };
+
+/*
+ * Functions declaration
+ */
+static int fscpos_attach_adapter(struct i2c_adapter *adapter);
+static int fscpos_detect(struct i2c_adapter *adapter, int address, int kind);
+static int fscpos_detach_client(struct i2c_client *client);
+
+static int fscpos_read_value(struct i2c_client *client, u8 register);
+static int fscpos_write_value(struct i2c_client *client, u8 register, u8 value);
+static struct fscpos_data *fscpos_update_device(struct device *dev);
+static void fscpos_init_client(struct i2c_client *client);
+
+static void reset_fan_alarm(struct i2c_client *client, int nr);
+
+/*
+ * Driver data (common to all clients)
+ */
+static struct i2c_driver fscpos_driver = {
+	.owner		= THIS_MODULE,
+	.name		= "fscpos",
+	.id		= I2C_DRIVERID_FSCPOS,
+	.flags		= I2C_DF_NOTIFY,
+	.attach_adapter	= fscpos_attach_adapter,
+	.detach_client	= fscpos_detach_client,
+};
+
+/*
+ * Client data (each client gets its own)
+ */
+struct fscpos_data {
+	struct i2c_client client;
+	struct semaphore update_lock;
+	char valid; 		/* 0 until following fields are valid */
+	unsigned long last_updated;	/* In jiffies */
+
+	/* register values */
+	u8 revision;		/* revision of chip */
+	u8 global_event;	/* global event status */
+	u8 global_control;	/* global control register */
+	u8 wdog_control;	/* watchdog control */
+	u8 wdog_state;		/* watchdog status */
+	u8 wdog_preset;		/* watchdog preset */
+	u8 volt[3];		/* 12, 5, battery current */
+	u8 temp_act[3];		/* temperature */
+	u8 temp_status[3];	/* status of sensor */
+	u8 fan_act[3];		/* fans revolutions per second */
+	u8 fan_status[3];	/* fan status */
+	u8 pwm[2];		/* fan min value for rps */
+	u8 fan_ripple[3];	/* divider for rps */
+};
+
+/* Temperature */
+#define TEMP_FROM_REG(val)	(((val) - 128) * 1000)
+
+static ssize_t show_temp_input(struct fscpos_data *data, char *buf, int nr)
+{
+	return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_act[nr - 1]));
+}
+
+static ssize_t show_temp_status(struct fscpos_data *data, char *buf, int nr)
+{
+	/* bits 2..7 reserved => mask with 0x03 */
+	return sprintf(buf, "%u\n", data->temp_status[nr - 1] & 0x03);
+}
+
+static ssize_t show_temp_reset(struct fscpos_data *data, char *buf, int nr)
+{
+	return sprintf(buf, "1\n");
+}
+
+static ssize_t set_temp_reset(struct i2c_client *client, struct fscpos_data
+			*data, const char *buf,	size_t count, int nr, int reg)
+{
+	unsigned long v = simple_strtoul(buf, NULL, 10);
+	if (v != 1) {
+		dev_err(&client->dev, "temp_reset value %ld not supported. "
+					"Use 1 to reset the alarm!\n", v);
+		return -EINVAL;
+	}
+
+	dev_info(&client->dev, "You used the temp_reset feature which has not "
+				"been proplerly tested. Please report your "
+				"experience to the module author.\n");
+
+	/* Supported value: 2 (clears the status) */
+	fscpos_write_value(client, FSCPOS_REG_TEMP_STATE[nr], 2);
+	return count;
+}
+
+/* Fans */
+#define RPM_FROM_REG(val)	((val) * 60)
+
+static ssize_t show_fan_status(struct fscpos_data *data, char *buf, int nr)
+{
+	/* bits 0..1, 3..7 reserved => mask with 0x04 */
+	return sprintf(buf, "%u\n", data->fan_status[nr - 1] & 0x04);
+}
+
+static ssize_t show_fan_input(struct fscpos_data *data, char *buf, int nr)
+{
+	return sprintf(buf, "%u\n", RPM_FROM_REG(data->fan_act[nr - 1]));
+}
+
+static ssize_t show_fan_ripple(struct fscpos_data *data, char *buf, int nr)
+{
+	/* bits 2..7 reserved => mask with 0x03 */
+	return sprintf(buf, "%u\n", data->fan_ripple[nr - 1] & 0x03);
+}
+
+static ssize_t set_fan_ripple(struct i2c_client *client, struct fscpos_data
+			*data, const char *buf,	size_t count, int nr, int reg)
+{
+	/* supported values: 2, 4, 8 */
+	unsigned long v = simple_strtoul(buf, NULL, 10);
+
+	switch (v) {
+		case 2: v = 1; break;
+		case 4: v = 2; break;
+		case 8: v = 3; break;
+	default:
+		dev_err(&client->dev, "fan_ripple value %ld not supported. "
+					"Must be one of 2, 4 or 8!\n", v);
+		return -EINVAL;
+	}
+	
+	down(&data->update_lock);
+	/* bits 2..7 reserved => mask with 0x03 */
+	data->fan_ripple[nr - 1] &= ~0x03;
+	data->fan_ripple[nr - 1] |= v;
+	
+	fscpos_write_value(client, reg, data->fan_ripple[nr - 1]);
+	up(&data->update_lock);
+	return count;
+}
+
+static ssize_t show_pwm(struct fscpos_data *data, char *buf, int nr)
+{
+	return sprintf(buf, "%u\n", data->pwm[nr - 1]);
+}
+
+static ssize_t set_pwm(struct i2c_client *client, struct fscpos_data *data,
+				const char *buf, size_t count, int nr, int reg)
+{
+	unsigned long v = simple_strtoul(buf, NULL, 10);
+
+	/* Range: 0..255 */
+	if (v < 0) v = 0;
+	if (v > 255) v = 255;
+
+	down(&data->update_lock);
+	data->pwm[nr - 1] = v;
+	fscpos_write_value(client, reg, data->pwm[nr - 1]);
+	up(&data->update_lock);
+	return count;
+}
+
+static void reset_fan_alarm(struct i2c_client *client, int nr)
+{
+	fscpos_write_value(client, FSCPOS_REG_FAN_STATE[nr], 4);
+}
+
+/* Volts */
+#define VOLT_FROM_REG(val, mult)	((val) * (mult) / 255)
+
+static ssize_t show_volt_12(struct device *dev, char *buf)
+{
+	struct fscpos_data *data = fscpos_update_device(dev);
+	return sprintf(buf, "%u\n", VOLT_FROM_REG(data->volt[0], 14200));
+}
+
+static ssize_t show_volt_5(struct device *dev, char *buf)
+{
+	struct fscpos_data *data = fscpos_update_device(dev);
+	return sprintf(buf, "%u\n", VOLT_FROM_REG(data->volt[1], 6600));
+}
+
+static ssize_t show_volt_batt(struct device *dev, char *buf)
+{
+	struct fscpos_data *data = fscpos_update_device(dev);
+	return sprintf(buf, "%u\n", VOLT_FROM_REG(data->volt[2], 3300));
+}
+
+/* Watchdog */
+static ssize_t show_wdog_control(struct fscpos_data *data, char *buf)
+{
+	/* bits 0..3 reserved, bit 6 write only => mask with 0xb0 */
+	return sprintf(buf, "%u\n", data->wdog_control & 0xb0);
+}
+
+static ssize_t set_wdog_control(struct i2c_client *client, struct fscpos_data
+				*data, const char *buf,	size_t count, int reg)
+{
+	/* bits 0..3 reserved => mask with 0xf0 */
+	unsigned long v = simple_strtoul(buf, NULL, 10) & 0xf0;
+
+	down(&data->update_lock);
+	data->wdog_control &= ~0xf0;
+	data->wdog_control |= v;
+	fscpos_write_value(client, reg, data->wdog_control);
+	up(&data->update_lock);
+	return count;
+}
+
+static ssize_t show_wdog_state(struct fscpos_data *data, char *buf)
+{
+	/* bits 0, 2..7 reserved => mask with 0x02 */
+	return sprintf(buf, "%u\n", data->wdog_state & 0x02);
+}
+
+static ssize_t set_wdog_state(struct i2c_client *client, struct fscpos_data
+				*data, const char *buf, size_t count, int reg)
+{
+	unsigned long v = simple_strtoul(buf, NULL, 10) & 0x02;
+
+	/* Valid values: 2 (clear) */
+	if (v != 2) {
+		dev_err(&client->dev, "wdog_state value %ld not supported. "
+					"Must be 2 to clear the state!\n", v);
+		return -EINVAL;
+	}
+
+	down(&data->update_lock);
+	data->wdog_state &= ~v;
+	fscpos_write_value(client, reg, v);
+	up(&data->update_lock);
+	return count;
+}
+
+static ssize_t show_wdog_preset(struct fscpos_data *data, char *buf)
+{
+	return sprintf(buf, "%u\n", data->wdog_preset);
+}
+
+static ssize_t set_wdog_preset(struct i2c_client *client, struct fscpos_data
+				*data, const char *buf,	size_t count, int reg)
+{
+	unsigned long v = simple_strtoul(buf, NULL, 10) & 0xff;
+
+	down(&data->update_lock);
+	data->wdog_preset = v;
+	fscpos_write_value(client, reg, data->wdog_preset);
+	up(&data->update_lock);
+	return count;
+}
+
+/* Event */
+static ssize_t show_event(struct device *dev, char *buf)
+{
+	/* bits 5..7 reserved => mask with 0x1f */
+	struct fscpos_data *data = fscpos_update_device(dev);
+	return sprintf(buf, "%u\n", data->global_event & 0x9b);
+}
+
+/*
+ * Sysfs stuff
+ */
+#define create_getter(kind, sub) \
+	static ssize_t sysfs_show_##kind##sub(struct device *dev, char *buf) \
+	{ \
+		struct fscpos_data *data = fscpos_update_device(dev); \
+		return show_##kind##sub(data, buf); \
+	}
+
+#define create_getter_n(kind, offset, sub) \
+	static ssize_t sysfs_show_##kind##offset##sub(struct device *dev, char\
+								 	*buf) \
+	{ \
+		struct fscpos_data *data = fscpos_update_device(dev); \
+		return show_##kind##sub(data, buf, offset); \
+	}
+
+#define create_setter(kind, sub, reg) \
+	static ssize_t sysfs_set_##kind##sub (struct device *dev, const char \
+							*buf, size_t count) \
+	{ \
+		struct i2c_client *client = to_i2c_client(dev); \
+		struct fscpos_data *data = i2c_get_clientdata(client); \
+		return set_##kind##sub(client, data, buf, count, reg); \
+	}
+
+#define create_setter_n(kind, offset, sub, reg) \
+	static ssize_t sysfs_set_##kind##offset##sub (struct device *dev, \
+					const char *buf, size_t count) \
+	{ \
+		struct i2c_client *client = to_i2c_client(dev); \
+		struct fscpos_data *data = i2c_get_clientdata(client); \
+		return set_##kind##sub(client, data, buf, count, offset, reg);\
+	}
+
+#define create_sysfs_device_ro(kind, sub, offset) \
+	static DEVICE_ATTR(kind##offset##sub, S_IRUGO, \
+					sysfs_show_##kind##offset##sub, NULL);
+
+#define create_sysfs_device_rw(kind, sub, offset) \
+	static DEVICE_ATTR(kind##offset##sub, S_IRUGO | S_IWUSR, \
+		sysfs_show_##kind##offset##sub, sysfs_set_##kind##offset##sub);
+
+#define sysfs_ro_n(kind, sub, offset) \
+	create_getter_n(kind, offset, sub); \
+	create_sysfs_device_ro(kind, sub, offset);
+
+#define sysfs_rw_n(kind, sub, offset, reg) \
+	create_getter_n(kind, offset, sub); \
+	create_setter_n(kind, offset, sub, reg); \
+	create_sysfs_device_rw(kind, sub, offset);
+
+#define sysfs_rw(kind, sub, reg) \
+	create_getter(kind, sub); \
+	create_setter(kind, sub, reg); \
+	create_sysfs_device_rw(kind, sub,);
+
+#define sysfs_fan_with_min(offset, reg_status, reg_ripple, reg_min) \
+	sysfs_fan(offset, reg_status, reg_ripple); \
+	sysfs_rw_n(pwm,, offset, reg_min);
+
+#define sysfs_fan(offset, reg_status, reg_ripple) \
+	sysfs_ro_n(fan, _input, offset); \
+	sysfs_ro_n(fan, _status, offset); \
+	sysfs_rw_n(fan, _ripple, offset, reg_ripple);
+
+#define sysfs_temp(offset, reg_status) \
+	sysfs_ro_n(temp, _input, offset); \
+	sysfs_ro_n(temp, _status, offset); \
+	sysfs_rw_n(temp, _reset, offset, reg_status);
+
+#define sysfs_watchdog(reg_wdog_preset, reg_wdog_state, reg_wdog_control) \
+	sysfs_rw(wdog, _control, reg_wdog_control); \
+	sysfs_rw(wdog, _preset, reg_wdog_preset); \
+	sysfs_rw(wdog, _state, reg_wdog_state);
+
+sysfs_fan_with_min(1, FSCPOS_REG_FAN_STATE[0], FSCPOS_REG_FAN_RIPPLE[0],
+							FSCPOS_REG_PWM[0]);
+sysfs_fan_with_min(2, FSCPOS_REG_FAN_STATE[1], FSCPOS_REG_FAN_RIPPLE[1],
+							FSCPOS_REG_PWM[1]);
+sysfs_fan(3, FSCPOS_REG_FAN_STATE[2], FSCPOS_REG_FAN_RIPPLE[2]);
+
+sysfs_temp(1, FSCPOS_REG_TEMP_STATE[0]);
+sysfs_temp(2, FSCPOS_REG_TEMP_STATE[1]);
+sysfs_temp(3, FSCPOS_REG_TEMP_STATE[2]);
+
+sysfs_watchdog(FSCPOS_REG_WDOG_PRESET, FSCPOS_REG_WDOG_STATE,
+						FSCPOS_REG_WDOG_CONTROL);
+
+static DEVICE_ATTR(event, S_IRUGO, show_event, NULL);
+static DEVICE_ATTR(in0_input, S_IRUGO, show_volt_12, NULL);
+static DEVICE_ATTR(in1_input, S_IRUGO, show_volt_5, NULL);
+static DEVICE_ATTR(in2_input, S_IRUGO, show_volt_batt, NULL);
+
+static int fscpos_attach_adapter(struct i2c_adapter *adapter)
+{
+	if (!(adapter->class & I2C_CLASS_HWMON))
+		return 0;
+	return i2c_detect(adapter, &addr_data, fscpos_detect);
+}
+
+int fscpos_detect(struct i2c_adapter *adapter, int address, int kind)
+{
+	struct i2c_client *new_client;
+	struct fscpos_data *data;
+	int err = 0;
+
+	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
+		goto exit;
+
+	/*
+	 * OK. For now, we presume we have a valid client. We now create the
+	 * client structure, even though we cannot fill it completely yet.
+	 * But it allows us to access fscpos_{read,write}_value.
+	 */
+
+	if (!(data = kmalloc(sizeof(struct fscpos_data), GFP_KERNEL))) {
+		err = -ENOMEM;
+		goto exit;
+	}
+	memset(data, 0, sizeof(struct fscpos_data));
+
+	new_client = &data->client;
+	i2c_set_clientdata(new_client, data);
+	new_client->addr = address;
+	new_client->adapter = adapter;
+	new_client->driver = &fscpos_driver;
+	new_client->flags = 0;
+
+	/* Do the remaining detection unless force or force_fscpos parameter */
+	if (kind < 0) {
+		if ((fscpos_read_value(new_client, FSCPOS_REG_IDENT_0)
+			!= 0x50) /* 'P' */
+		|| (fscpos_read_value(new_client, FSCPOS_REG_IDENT_1)
+			!= 0x45) /* 'E' */
+		|| (fscpos_read_value(new_client, FSCPOS_REG_IDENT_2)
+			!= 0x47))/* 'G' */
+		{
+			dev_dbg(&new_client->dev, "fscpos detection failed\n");
+			goto exit_free;
+		}
+	}
+
+	/* Fill in the remaining client fields and put it in the global list */
+	strlcpy(new_client->name, "fscpos", I2C_NAME_SIZE);
+
+	data->valid = 0;
+	init_MUTEX(&data->update_lock);
+
+	/* Tell the I2C layer a new client has arrived */
+	if ((err = i2c_attach_client(new_client)))
+		goto exit_free;
+
+	/* Inizialize the fscpos chip */
+	fscpos_init_client(new_client);
+
+	/* Announce that the chip was found */
+	dev_info(&new_client->dev, "Found fscpos chip, rev %u\n", data->revision);
+
+	/* Register sysfs hooks */
+	device_create_file(&new_client->dev, &dev_attr_event);
+	device_create_file(&new_client->dev, &dev_attr_in0_input);
+	device_create_file(&new_client->dev, &dev_attr_in1_input);
+	device_create_file(&new_client->dev, &dev_attr_in2_input);
+	device_create_file(&new_client->dev, &dev_attr_wdog_control);
+	device_create_file(&new_client->dev, &dev_attr_wdog_preset);
+	device_create_file(&new_client->dev, &dev_attr_wdog_state);
+	device_create_file(&new_client->dev, &dev_attr_temp1_input);
+	device_create_file(&new_client->dev, &dev_attr_temp1_status);
+	device_create_file(&new_client->dev, &dev_attr_temp1_reset);
+	device_create_file(&new_client->dev, &dev_attr_temp2_input);
+	device_create_file(&new_client->dev, &dev_attr_temp2_status);
+	device_create_file(&new_client->dev, &dev_attr_temp2_reset);
+	device_create_file(&new_client->dev, &dev_attr_temp3_input);
+	device_create_file(&new_client->dev, &dev_attr_temp3_status);
+	device_create_file(&new_client->dev, &dev_attr_temp3_reset);
+	device_create_file(&new_client->dev, &dev_attr_fan1_input);
+	device_create_file(&new_client->dev, &dev_attr_fan1_status);
+	device_create_file(&new_client->dev, &dev_attr_fan1_ripple);
+	device_create_file(&new_client->dev, &dev_attr_pwm1);
+	device_create_file(&new_client->dev, &dev_attr_fan2_input);
+	device_create_file(&new_client->dev, &dev_attr_fan2_status);
+	device_create_file(&new_client->dev, &dev_attr_fan2_ripple);
+	device_create_file(&new_client->dev, &dev_attr_pwm2);
+	device_create_file(&new_client->dev, &dev_attr_fan3_input);
+	device_create_file(&new_client->dev, &dev_attr_fan3_status);
+	device_create_file(&new_client->dev, &dev_attr_fan3_ripple);
+
+	return 0;
+
+exit_free:
+	kfree(data);
+exit:
+	return err;
+}
+
+static int fscpos_detach_client(struct i2c_client *client)
+{
+	int err;
+
+	if ((err = i2c_detach_client(client))) {
+		dev_err(&client->dev, "Client deregistration failed, client"
+							" not detached.\n");
+		return err;
+	}
+	kfree(i2c_get_clientdata(client));
+	return 0;
+}
+
+static int fscpos_read_value(struct i2c_client *client, u8 reg)
+{
+	dev_dbg(&client->dev, "Read reg 0x%02x\n", reg);
+	return i2c_smbus_read_byte_data(client, reg);
+}
+
+static int fscpos_write_value(struct i2c_client *client, u8 reg, u8 value)
+{
+	dev_dbg(&client->dev, "Write reg 0x%02x, val 0x%02x\n", reg, value);
+	return i2c_smbus_write_byte_data(client, reg, value);
+}
+
+/* Called when we have found a new FSCPOS chip */
+static void fscpos_init_client(struct i2c_client *client)
+{
+	struct fscpos_data *data = i2c_get_clientdata(client);
+
+	/* read revision from chip */
+	data->revision = fscpos_read_value(client, FSCPOS_REG_REVISION);
+}
+
+static struct fscpos_data *fscpos_update_device(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct fscpos_data *data = i2c_get_clientdata(client);
+
+	down(&data->update_lock);
+
+	if ((jiffies - data->last_updated > 2 * HZ) ||
+			(jiffies < data->last_updated) || !data->valid) {
+		int i;
+
+		dev_dbg(&client->dev, "Starting fscpos update\n");
+
+		for (i = 0; i < 3; i++) {
+			data->temp_act[i] = fscpos_read_value(client,
+						FSCPOS_REG_TEMP_ACT[i]);
+			data->temp_status[i] = fscpos_read_value(client,
+						FSCPOS_REG_TEMP_STATE[i]);
+			data->fan_act[i] = fscpos_read_value(client,
+						FSCPOS_REG_FAN_ACT[i]);
+			data->fan_status[i] = fscpos_read_value(client,
+						FSCPOS_REG_FAN_STATE[i]);
+			data->fan_ripple[i] = fscpos_read_value(client,
+						FSCPOS_REG_FAN_RIPPLE[i]);
+			if (i < 2) {
+				/* fan2_min is not supported by the chip */
+				data->pwm[i] = fscpos_read_value(client,
+							FSCPOS_REG_PWM[i]);
+			}
+			/* reset fan status if speed is back to > 0 */
+			if (data->fan_status[i] != 0 && data->fan_act[i] > 0) {
+				reset_fan_alarm(client, i);
+			}
+		}
+
+		data->volt[0] = fscpos_read_value(client, FSCPOS_REG_VOLT_12);
+		data->volt[1] = fscpos_read_value(client, FSCPOS_REG_VOLT_5);
+		data->volt[2] = fscpos_read_value(client, FSCPOS_REG_VOLT_BATT);
+
+		data->wdog_preset = fscpos_read_value(client,
+							FSCPOS_REG_WDOG_PRESET);
+		data->wdog_state = fscpos_read_value(client,
+							FSCPOS_REG_WDOG_STATE);
+		data->wdog_control = fscpos_read_value(client,
+						FSCPOS_REG_WDOG_CONTROL);
+
+		data->global_event = fscpos_read_value(client,
+						FSCPOS_REG_EVENT_STATE);
+
+		data->last_updated = jiffies;
+		data->valid = 1;
+	}
+	up(&data->update_lock);
+	return data;
+}
+
+static int __init sm_fscpos_init(void)
+{
+	return i2c_add_driver(&fscpos_driver);
+}
+
+static void __exit sm_fscpos_exit(void)
+{
+	i2c_del_driver(&fscpos_driver);
+}
+
+MODULE_AUTHOR("Stefan Ott <stefan@desire.ch> based on work from Hermann Jung "
+				"<hej@odn.de>, Frodo Looijaard <frodol@dds.nl>"
+				" and Philip Edelbrock <phil@netroedge.com>");
+MODULE_DESCRIPTION("fujitsu siemens poseidon chip driver");
+MODULE_LICENSE("GPL");
+
+module_init(sm_fscpos_init);
+module_exit(sm_fscpos_exit);
diff --git a/drivers/i2c/chips/gl518sm.c b/drivers/i2c/chips/gl518sm.c
new file mode 100644
index 00000000000..c82d6ce2120
--- /dev/null
+++ b/drivers/i2c/chips/gl518sm.c
@@ -0,0 +1,605 @@
+/*
+ * gl518sm.c - Part of lm_sensors, Linux kernel modules for hardware
+ *             monitoring
+ * Copyright (C) 1998, 1999 Frodo Looijaard <frodol@dds.nl> and
+ * Kyosti Malkki <kmalkki@cc.hut.fi>
+ * Copyright (C) 2004 Hong-Gunn Chew <hglinux@gunnet.org> and
+ * Jean Delvare <khali@linux-fr.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Ported to Linux 2.6 by Hong-Gunn Chew with the help of Jean Delvare
+ * and advice of Greg Kroah-Hartman.
+ *
+ * Notes about the port:
+ * Release 0x00 of the GL518SM chipset doesn't support reading of in0,
+ * in1 nor in2. The original driver had an ugly workaround to get them
+ * anyway (changing limits and watching alarms trigger and wear off).
+ * We did not keep that part of the original driver in the Linux 2.6
+ * version, since it was making the driver significantly more complex
+ * with no real benefit.
+ *
+ * History:
+ * 2004-01-28  Original port. (Hong-Gunn Chew)
+ * 2004-01-31  Code review and approval. (Jean Delvare)
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/jiffies.h>
+#include <linux/i2c.h>
+#include <linux/i2c-sensor.h>
+
+/* Addresses to scan */
+static unsigned short normal_i2c[] = { 0x2c, 0x2d, I2C_CLIENT_END };
+static unsigned int normal_isa[] = { I2C_CLIENT_ISA_END };
+
+/* Insmod parameters */
+SENSORS_INSMOD_2(gl518sm_r00, gl518sm_r80);
+
+/* Many GL518 constants specified below */
+
+/* The GL518 registers */
+#define GL518_REG_CHIP_ID	0x00
+#define GL518_REG_REVISION	0x01
+#define GL518_REG_VENDOR_ID	0x02
+#define GL518_REG_CONF		0x03
+#define GL518_REG_TEMP_IN	0x04
+#define GL518_REG_TEMP_MAX	0x05
+#define GL518_REG_TEMP_HYST	0x06
+#define GL518_REG_FAN_COUNT	0x07
+#define GL518_REG_FAN_LIMIT	0x08
+#define GL518_REG_VIN1_LIMIT	0x09
+#define GL518_REG_VIN2_LIMIT	0x0a
+#define GL518_REG_VIN3_LIMIT	0x0b
+#define GL518_REG_VDD_LIMIT	0x0c
+#define GL518_REG_VIN3		0x0d
+#define GL518_REG_MISC		0x0f
+#define GL518_REG_ALARM		0x10
+#define GL518_REG_MASK		0x11
+#define GL518_REG_INT		0x12
+#define GL518_REG_VIN2		0x13
+#define GL518_REG_VIN1		0x14
+#define GL518_REG_VDD		0x15
+
+
+/*
+ * Conversions. Rounding and limit checking is only done on the TO_REG
+ * variants. Note that you should be a bit careful with which arguments
+ * these macros are called: arguments may be evaluated more than once.
+ * Fixing this is just not worth it.
+ */
+
+#define RAW_FROM_REG(val)	val
+
+#define BOOL_FROM_REG(val)	((val)?0:1)
+#define BOOL_TO_REG(val)	((val)?0:1)
+
+#define TEMP_TO_REG(val)	(SENSORS_LIMIT(((((val)<0? \
+				(val)-500:(val)+500)/1000)+119),0,255))
+#define TEMP_FROM_REG(val)	(((val) - 119) * 1000)
+
+static inline u8 FAN_TO_REG(long rpm, int div)
+{
+	long rpmdiv;
+	if (rpm == 0)
+		return 0;
+	rpmdiv = SENSORS_LIMIT(rpm, 1, 1920000) * div;
+	return SENSORS_LIMIT((960000 + rpmdiv / 2) / rpmdiv, 1, 255);
+}
+#define FAN_FROM_REG(val,div)	((val)==0 ? 0 : (960000/((val)*(div))))
+
+#define IN_TO_REG(val)		(SENSORS_LIMIT((((val)+9)/19),0,255))
+#define IN_FROM_REG(val)	((val)*19)
+
+#define VDD_TO_REG(val)		(SENSORS_LIMIT((((val)*4+47)/95),0,255))
+#define VDD_FROM_REG(val)	(((val)*95+2)/4)
+
+#define DIV_TO_REG(val)		((val)==4?2:(val)==2?1:(val)==1?0:3)
+#define DIV_FROM_REG(val)	(1 << (val))
+
+#define BEEP_MASK_TO_REG(val)	((val) & 0x7f & data->alarm_mask)
+#define BEEP_MASK_FROM_REG(val)	((val) & 0x7f)
+
+/* Each client has this additional data */
+struct gl518_data {
+	struct i2c_client client;
+	enum chips type;
+
+	struct semaphore update_lock;
+	char valid;		/* !=0 if following fields are valid */
+	unsigned long last_updated;	/* In jiffies */
+
+	u8 voltage_in[4];	/* Register values; [0] = VDD */
+	u8 voltage_min[4];	/* Register values; [0] = VDD */
+	u8 voltage_max[4];	/* Register values; [0] = VDD */
+	u8 iter_voltage_in[4];	/* Register values; [0] = VDD */
+	u8 fan_in[2];
+	u8 fan_min[2];
+	u8 fan_div[2];		/* Register encoding, shifted right */
+	u8 fan_auto1;		/* Boolean */
+	u8 temp_in;		/* Register values */
+	u8 temp_max;		/* Register values */
+	u8 temp_hyst;		/* Register values */
+	u8 alarms;		/* Register value */
+	u8 alarm_mask;		/* Register value */
+	u8 beep_mask;		/* Register value */
+	u8 beep_enable;		/* Boolean */
+};
+
+static int gl518_attach_adapter(struct i2c_adapter *adapter);
+static int gl518_detect(struct i2c_adapter *adapter, int address, int kind);
+static void gl518_init_client(struct i2c_client *client);
+static int gl518_detach_client(struct i2c_client *client);
+static int gl518_read_value(struct i2c_client *client, u8 reg);
+static int gl518_write_value(struct i2c_client *client, u8 reg, u16 value);
+static struct gl518_data *gl518_update_device(struct device *dev);
+
+/* This is the driver that will be inserted */
+static struct i2c_driver gl518_driver = {
+	.owner		= THIS_MODULE,
+	.name		= "gl518sm",
+	.id		= I2C_DRIVERID_GL518,
+	.flags		= I2C_DF_NOTIFY,
+	.attach_adapter	= gl518_attach_adapter,
+	.detach_client	= gl518_detach_client,
+};
+
+/*
+ * Sysfs stuff
+ */
+
+#define show(type, suffix, value)					\
+static ssize_t show_##suffix(struct device *dev, char *buf)		\
+{									\
+	struct gl518_data *data = gl518_update_device(dev);		\
+	return sprintf(buf, "%d\n", type##_FROM_REG(data->value));	\
+}
+
+#define show_fan(suffix, value, index)					\
+static ssize_t show_##suffix(struct device *dev, char *buf)		\
+{									\
+	struct gl518_data *data = gl518_update_device(dev);		\
+	return sprintf(buf, "%d\n", FAN_FROM_REG(data->value[index],	\
+		DIV_FROM_REG(data->fan_div[index])));			\
+}
+
+show(TEMP, temp_input1, temp_in);
+show(TEMP, temp_max1, temp_max);
+show(TEMP, temp_hyst1, temp_hyst);
+show(BOOL, fan_auto1, fan_auto1);
+show_fan(fan_input1, fan_in, 0);
+show_fan(fan_input2, fan_in, 1);
+show_fan(fan_min1, fan_min, 0);
+show_fan(fan_min2, fan_min, 1);
+show(DIV, fan_div1, fan_div[0]);
+show(DIV, fan_div2, fan_div[1]);
+show(VDD, in_input0, voltage_in[0]);
+show(IN, in_input1, voltage_in[1]);
+show(IN, in_input2, voltage_in[2]);
+show(IN, in_input3, voltage_in[3]);
+show(VDD, in_min0, voltage_min[0]);
+show(IN, in_min1, voltage_min[1]);
+show(IN, in_min2, voltage_min[2]);
+show(IN, in_min3, voltage_min[3]);
+show(VDD, in_max0, voltage_max[0]);
+show(IN, in_max1, voltage_max[1]);
+show(IN, in_max2, voltage_max[2]);
+show(IN, in_max3, voltage_max[3]);
+show(RAW, alarms, alarms);
+show(BOOL, beep_enable, beep_enable);
+show(BEEP_MASK, beep_mask, beep_mask);
+
+#define set(type, suffix, value, reg)					\
+static ssize_t set_##suffix(struct device *dev, const char *buf,	\
+	size_t count)							\
+{									\
+	struct i2c_client *client = to_i2c_client(dev);			\
+	struct gl518_data *data = i2c_get_clientdata(client);		\
+	long val = simple_strtol(buf, NULL, 10);			\
+									\
+	down(&data->update_lock);					\
+	data->value = type##_TO_REG(val);				\
+	gl518_write_value(client, reg, data->value);			\
+	up(&data->update_lock);						\
+	return count;							\
+}
+
+#define set_bits(type, suffix, value, reg, mask, shift)			\
+static ssize_t set_##suffix(struct device *dev, const char *buf,	\
+	size_t count)							\
+{									\
+	struct i2c_client *client = to_i2c_client(dev);			\
+	struct gl518_data *data = i2c_get_clientdata(client);		\
+	int regvalue;							\
+	unsigned long val = simple_strtoul(buf, NULL, 10);		\
+									\
+	down(&data->update_lock);					\
+	regvalue = gl518_read_value(client, reg);			\
+	data->value = type##_TO_REG(val);				\
+	regvalue = (regvalue & ~mask) | (data->value << shift);		\
+	gl518_write_value(client, reg, regvalue);			\
+	up(&data->update_lock);						\
+	return count;							\
+}
+
+#define set_low(type, suffix, value, reg)				\
+	set_bits(type, suffix, value, reg, 0x00ff, 0)
+#define set_high(type, suffix, value, reg)				\
+	set_bits(type, suffix, value, reg, 0xff00, 8)
+
+set(TEMP, temp_max1, temp_max, GL518_REG_TEMP_MAX);
+set(TEMP, temp_hyst1, temp_hyst, GL518_REG_TEMP_HYST);
+set_bits(BOOL, fan_auto1, fan_auto1, GL518_REG_MISC, 0x08, 3);
+set_bits(DIV, fan_div1, fan_div[0], GL518_REG_MISC, 0xc0, 6);
+set_bits(DIV, fan_div2, fan_div[1], GL518_REG_MISC, 0x30, 4);
+set_low(VDD, in_min0, voltage_min[0], GL518_REG_VDD_LIMIT);
+set_low(IN, in_min1, voltage_min[1], GL518_REG_VIN1_LIMIT);
+set_low(IN, in_min2, voltage_min[2], GL518_REG_VIN2_LIMIT);
+set_low(IN, in_min3, voltage_min[3], GL518_REG_VIN3_LIMIT);
+set_high(VDD, in_max0, voltage_max[0], GL518_REG_VDD_LIMIT);
+set_high(IN, in_max1, voltage_max[1], GL518_REG_VIN1_LIMIT);
+set_high(IN, in_max2, voltage_max[2], GL518_REG_VIN2_LIMIT);
+set_high(IN, in_max3, voltage_max[3], GL518_REG_VIN3_LIMIT);
+set_bits(BOOL, beep_enable, beep_enable, GL518_REG_CONF, 0x04, 2);
+set(BEEP_MASK, beep_mask, beep_mask, GL518_REG_ALARM);
+
+static ssize_t set_fan_min1(struct device *dev, const char *buf, size_t count)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct gl518_data *data = i2c_get_clientdata(client);
+	int regvalue;
+	unsigned long val = simple_strtoul(buf, NULL, 10);
+
+	down(&data->update_lock);
+	regvalue = gl518_read_value(client, GL518_REG_FAN_LIMIT);
+	data->fan_min[0] = FAN_TO_REG(val,
+		DIV_FROM_REG(data->fan_div[0]));
+	regvalue = (regvalue & 0x00ff) | (data->fan_min[0] << 8);
+	gl518_write_value(client, GL518_REG_FAN_LIMIT, regvalue);
+
+	data->beep_mask = gl518_read_value(client, GL518_REG_ALARM);
+	if (data->fan_min[0] == 0)
+		data->alarm_mask &= ~0x20;
+	else
+		data->alarm_mask |= 0x20;
+	data->beep_mask &= data->alarm_mask;
+	gl518_write_value(client, GL518_REG_ALARM, data->beep_mask);
+
+	up(&data->update_lock);
+	return count;
+}
+
+static ssize_t set_fan_min2(struct device *dev, const char *buf, size_t count)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct gl518_data *data = i2c_get_clientdata(client);
+	int regvalue;
+	unsigned long val = simple_strtoul(buf, NULL, 10);
+
+	down(&data->update_lock);
+	regvalue = gl518_read_value(client, GL518_REG_FAN_LIMIT);
+	data->fan_min[1] = FAN_TO_REG(val,
+		DIV_FROM_REG(data->fan_div[1]));
+	regvalue = (regvalue & 0xff00) | data->fan_min[1];
+	gl518_write_value(client, GL518_REG_FAN_LIMIT, regvalue);
+
+	data->beep_mask = gl518_read_value(client, GL518_REG_ALARM);
+	if (data->fan_min[1] == 0)
+		data->alarm_mask &= ~0x40;
+	else
+		data->alarm_mask |= 0x40;
+	data->beep_mask &= data->alarm_mask;
+	gl518_write_value(client, GL518_REG_ALARM, data->beep_mask);
+
+	up(&data->update_lock);
+	return count;
+}
+
+static DEVICE_ATTR(temp1_input, S_IRUGO, show_temp_input1, NULL);
+static DEVICE_ATTR(temp1_max, S_IWUSR|S_IRUGO, show_temp_max1, set_temp_max1);
+static DEVICE_ATTR(temp1_max_hyst, S_IWUSR|S_IRUGO,
+	show_temp_hyst1, set_temp_hyst1);
+static DEVICE_ATTR(fan1_auto, S_IWUSR|S_IRUGO, show_fan_auto1, set_fan_auto1);
+static DEVICE_ATTR(fan1_input, S_IRUGO, show_fan_input1, NULL);
+static DEVICE_ATTR(fan2_input, S_IRUGO, show_fan_input2, NULL);
+static DEVICE_ATTR(fan1_min, S_IWUSR|S_IRUGO, show_fan_min1, set_fan_min1);
+static DEVICE_ATTR(fan2_min, S_IWUSR|S_IRUGO, show_fan_min2, set_fan_min2);
+static DEVICE_ATTR(fan1_div, S_IWUSR|S_IRUGO, show_fan_div1, set_fan_div1);
+static DEVICE_ATTR(fan2_div, S_IWUSR|S_IRUGO, show_fan_div2, set_fan_div2);
+static DEVICE_ATTR(in0_input, S_IRUGO, show_in_input0, NULL);
+static DEVICE_ATTR(in1_input, S_IRUGO, show_in_input1, NULL);
+static DEVICE_ATTR(in2_input, S_IRUGO, show_in_input2, NULL);
+static DEVICE_ATTR(in3_input, S_IRUGO, show_in_input3, NULL);
+static DEVICE_ATTR(in0_min, S_IWUSR|S_IRUGO, show_in_min0, set_in_min0);
+static DEVICE_ATTR(in1_min, S_IWUSR|S_IRUGO, show_in_min1, set_in_min1);
+static DEVICE_ATTR(in2_min, S_IWUSR|S_IRUGO, show_in_min2, set_in_min2);
+static DEVICE_ATTR(in3_min, S_IWUSR|S_IRUGO, show_in_min3, set_in_min3);
+static DEVICE_ATTR(in0_max, S_IWUSR|S_IRUGO, show_in_max0, set_in_max0);
+static DEVICE_ATTR(in1_max, S_IWUSR|S_IRUGO, show_in_max1, set_in_max1);
+static DEVICE_ATTR(in2_max, S_IWUSR|S_IRUGO, show_in_max2, set_in_max2);
+static DEVICE_ATTR(in3_max, S_IWUSR|S_IRUGO, show_in_max3, set_in_max3);
+static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL);
+static DEVICE_ATTR(beep_enable, S_IWUSR|S_IRUGO,
+	show_beep_enable, set_beep_enable);
+static DEVICE_ATTR(beep_mask, S_IWUSR|S_IRUGO,
+	show_beep_mask, set_beep_mask);
+
+/*
+ * Real code
+ */
+
+static int gl518_attach_adapter(struct i2c_adapter *adapter)
+{
+	if (!(adapter->class & I2C_CLASS_HWMON))
+		return 0;
+	return i2c_detect(adapter, &addr_data, gl518_detect);
+}
+
+static int gl518_detect(struct i2c_adapter *adapter, int address, int kind)
+{
+	int i;
+	struct i2c_client *new_client;
+	struct gl518_data *data;
+	int err = 0;
+
+	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA |
+				     I2C_FUNC_SMBUS_WORD_DATA))
+		goto exit;
+
+	/* OK. For now, we presume we have a valid client. We now create the
+	   client structure, even though we cannot fill it completely yet.
+	   But it allows us to access gl518_{read,write}_value. */
+
+	if (!(data = kmalloc(sizeof(struct gl518_data), GFP_KERNEL))) {
+		err = -ENOMEM;
+		goto exit;
+	}
+	memset(data, 0, sizeof(struct gl518_data));
+
+	new_client = &data->client;
+	i2c_set_clientdata(new_client, data);
+
+	new_client->addr = address;
+	new_client->adapter = adapter;
+	new_client->driver = &gl518_driver;
+	new_client->flags = 0;
+
+	/* Now, we do the remaining detection. */
+
+	if (kind < 0) {
+		if ((gl518_read_value(new_client, GL518_REG_CHIP_ID) != 0x80)
+		 || (gl518_read_value(new_client, GL518_REG_CONF) & 0x80))
+			goto exit_free;
+	}
+
+	/* Determine the chip type. */
+	if (kind <= 0) {
+		i = gl518_read_value(new_client, GL518_REG_REVISION);
+		if (i == 0x00) {
+			kind = gl518sm_r00;
+		} else if (i == 0x80) {
+			kind = gl518sm_r80;
+		} else {
+			if (kind <= 0)
+				dev_info(&adapter->dev,
+				    "Ignoring 'force' parameter for unknown "
+				    "chip at adapter %d, address 0x%02x\n",
+				    i2c_adapter_id(adapter), address);
+			goto exit_free;
+		}
+	}
+
+	/* Fill in the remaining client fields */
+	strlcpy(new_client->name, "gl518sm", I2C_NAME_SIZE);
+	data->type = kind;
+	data->valid = 0;
+	init_MUTEX(&data->update_lock);
+
+	/* Tell the I2C layer a new client has arrived */
+	if ((err = i2c_attach_client(new_client)))
+		goto exit_free;
+
+	/* Initialize the GL518SM chip */
+	data->alarm_mask = 0xff;
+	data->voltage_in[0]=data->voltage_in[1]=data->voltage_in[2]=0;
+	gl518_init_client((struct i2c_client *) new_client);
+
+	/* Register sysfs hooks */
+	device_create_file(&new_client->dev, &dev_attr_in0_input);
+	device_create_file(&new_client->dev, &dev_attr_in1_input);
+	device_create_file(&new_client->dev, &dev_attr_in2_input);
+	device_create_file(&new_client->dev, &dev_attr_in3_input);
+	device_create_file(&new_client->dev, &dev_attr_in0_min);
+	device_create_file(&new_client->dev, &dev_attr_in1_min);
+	device_create_file(&new_client->dev, &dev_attr_in2_min);
+	device_create_file(&new_client->dev, &dev_attr_in3_min);
+	device_create_file(&new_client->dev, &dev_attr_in0_max);
+	device_create_file(&new_client->dev, &dev_attr_in1_max);
+	device_create_file(&new_client->dev, &dev_attr_in2_max);
+	device_create_file(&new_client->dev, &dev_attr_in3_max);
+	device_create_file(&new_client->dev, &dev_attr_fan1_auto);
+	device_create_file(&new_client->dev, &dev_attr_fan1_input);
+	device_create_file(&new_client->dev, &dev_attr_fan2_input);
+	device_create_file(&new_client->dev, &dev_attr_fan1_min);
+	device_create_file(&new_client->dev, &dev_attr_fan2_min);
+	device_create_file(&new_client->dev, &dev_attr_fan1_div);
+	device_create_file(&new_client->dev, &dev_attr_fan2_div);
+	device_create_file(&new_client->dev, &dev_attr_temp1_input);
+	device_create_file(&new_client->dev, &dev_attr_temp1_max);
+	device_create_file(&new_client->dev, &dev_attr_temp1_max_hyst);
+	device_create_file(&new_client->dev, &dev_attr_alarms);
+	device_create_file(&new_client->dev, &dev_attr_beep_enable);
+	device_create_file(&new_client->dev, &dev_attr_beep_mask);
+
+	return 0;
+
+/* OK, this is not exactly good programming practice, usually. But it is
+   very code-efficient in this case. */
+
+exit_free:
+	kfree(data);
+exit:
+	return err;
+}
+
+
+/* Called when we have found a new GL518SM.
+   Note that we preserve D4:NoFan2 and D2:beep_enable. */
+static void gl518_init_client(struct i2c_client *client)
+{
+	/* Make sure we leave D7:Reset untouched */
+	u8 regvalue = gl518_read_value(client, GL518_REG_CONF) & 0x7f;
+
+	/* Comparator mode (D3=0), standby mode (D6=0) */
+	gl518_write_value(client, GL518_REG_CONF, (regvalue &= 0x37));
+
+	/* Never interrupts */
+	gl518_write_value(client, GL518_REG_MASK, 0x00);
+
+	/* Clear status register (D5=1), start (D6=1) */
+	gl518_write_value(client, GL518_REG_CONF, 0x20 | regvalue);
+	gl518_write_value(client, GL518_REG_CONF, 0x40 | regvalue);
+}
+
+static int gl518_detach_client(struct i2c_client *client)
+{
+	int err;
+
+	if ((err = i2c_detach_client(client))) {
+		dev_err(&client->dev, "Client deregistration failed, "
+			"client not detached.\n");
+		return err;
+	}
+
+	kfree(i2c_get_clientdata(client));
+
+	return 0;
+}
+
+/* Registers 0x07 to 0x0c are word-sized, others are byte-sized 
+   GL518 uses a high-byte first convention, which is exactly opposite to
+   the usual practice. */
+static int gl518_read_value(struct i2c_client *client, u8 reg)
+{
+	if ((reg >= 0x07) && (reg <= 0x0c))
+		return swab16(i2c_smbus_read_word_data(client, reg));
+	else
+		return i2c_smbus_read_byte_data(client, reg);
+}
+
+/* Registers 0x07 to 0x0c are word-sized, others are byte-sized 
+   GL518 uses a high-byte first convention, which is exactly opposite to
+   the usual practice. */
+static int gl518_write_value(struct i2c_client *client, u8 reg, u16 value)
+{
+	if ((reg >= 0x07) && (reg <= 0x0c))
+		return i2c_smbus_write_word_data(client, reg, swab16(value));
+	else
+		return i2c_smbus_write_byte_data(client, reg, value);
+}
+
+static struct gl518_data *gl518_update_device(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct gl518_data *data = i2c_get_clientdata(client);
+	int val;
+
+	down(&data->update_lock);
+
+	if (time_after(jiffies, data->last_updated + HZ + HZ / 2)
+	    || !data->valid) {
+		dev_dbg(&client->dev, "Starting gl518 update\n");
+
+		data->alarms = gl518_read_value(client, GL518_REG_INT);
+		data->beep_mask = gl518_read_value(client, GL518_REG_ALARM);
+
+		val = gl518_read_value(client, GL518_REG_VDD_LIMIT);
+		data->voltage_min[0] = val & 0xff;
+		data->voltage_max[0] = (val >> 8) & 0xff;
+		val = gl518_read_value(client, GL518_REG_VIN1_LIMIT);
+		data->voltage_min[1] = val & 0xff;
+		data->voltage_max[1] = (val >> 8) & 0xff;
+		val = gl518_read_value(client, GL518_REG_VIN2_LIMIT);
+		data->voltage_min[2] = val & 0xff;
+		data->voltage_max[2] = (val >> 8) & 0xff;
+		val = gl518_read_value(client, GL518_REG_VIN3_LIMIT);
+		data->voltage_min[3] = val & 0xff;
+		data->voltage_max[3] = (val >> 8) & 0xff;
+
+		val = gl518_read_value(client, GL518_REG_FAN_COUNT);
+		data->fan_in[0] = (val >> 8) & 0xff;
+		data->fan_in[1] = val & 0xff;
+
+		val = gl518_read_value(client, GL518_REG_FAN_LIMIT);
+		data->fan_min[0] = (val >> 8) & 0xff;
+		data->fan_min[1] = val & 0xff;
+
+		data->temp_in = gl518_read_value(client, GL518_REG_TEMP_IN);
+		data->temp_max =
+		    gl518_read_value(client, GL518_REG_TEMP_MAX);
+		data->temp_hyst =
+		    gl518_read_value(client, GL518_REG_TEMP_HYST);
+
+		val = gl518_read_value(client, GL518_REG_MISC);
+		data->fan_div[0] = (val >> 6) & 0x03;
+		data->fan_div[1] = (val >> 4) & 0x03;
+		data->fan_auto1  = (val >> 3) & 0x01;
+
+		data->alarms &= data->alarm_mask;
+
+		val = gl518_read_value(client, GL518_REG_CONF);
+		data->beep_enable = (val >> 2) & 1;
+
+		if (data->type != gl518sm_r00) {
+			data->voltage_in[0] =
+			    gl518_read_value(client, GL518_REG_VDD);
+			data->voltage_in[1] =
+			    gl518_read_value(client, GL518_REG_VIN1);
+			data->voltage_in[2] =
+			    gl518_read_value(client, GL518_REG_VIN2);
+		}
+		data->voltage_in[3] =
+		    gl518_read_value(client, GL518_REG_VIN3);
+
+		data->last_updated = jiffies;
+		data->valid = 1;
+	}
+
+	up(&data->update_lock);
+
+	return data;
+}
+
+static int __init sensors_gl518sm_init(void)
+{
+	return i2c_add_driver(&gl518_driver);
+}
+
+static void __exit sensors_gl518sm_exit(void)
+{
+	i2c_del_driver(&gl518_driver);
+}
+
+MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl>, "
+	"Kyosti Malkki <kmalkki@cc.hut.fi> and "
+	"Hong-Gunn Chew <hglinux@gunnet.org>");
+MODULE_DESCRIPTION("GL518SM driver");
+MODULE_LICENSE("GPL");
+
+module_init(sensors_gl518sm_init);
+module_exit(sensors_gl518sm_exit);
diff --git a/drivers/i2c/chips/gl520sm.c b/drivers/i2c/chips/gl520sm.c
new file mode 100644
index 00000000000..3fd17e46ffc
--- /dev/null
+++ b/drivers/i2c/chips/gl520sm.c
@@ -0,0 +1,769 @@
+/*
+    gl520sm.c - Part of lm_sensors, Linux kernel modules for hardware
+                monitoring
+    Copyright (c) 1998, 1999  Frodo Looijaard <frodol@dds.nl>,
+                              Kyösti Mälkki <kmalkki@cc.hut.fi>
+    Copyright (c) 2005        Maarten Deprez <maartendeprez@users.sourceforge.net>
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+
+*/
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/i2c-sensor.h>
+#include <linux/i2c-vid.h>
+
+/* Type of the extra sensor */
+static unsigned short extra_sensor_type;
+module_param(extra_sensor_type, ushort, 0);
+MODULE_PARM_DESC(extra_sensor_type, "Type of extra sensor (0=autodetect, 1=temperature, 2=voltage)");
+
+/* Addresses to scan */
+static unsigned short normal_i2c[] = { 0x2c, 0x2d, I2C_CLIENT_END };
+static unsigned int normal_isa[] = { I2C_CLIENT_ISA_END };
+
+/* Insmod parameters */
+SENSORS_INSMOD_1(gl520sm);
+
+/* Many GL520 constants specified below 
+One of the inputs can be configured as either temp or voltage.
+That's why _TEMP2 and _IN4 access the same register 
+*/
+
+/* The GL520 registers */
+#define GL520_REG_CHIP_ID		0x00
+#define GL520_REG_REVISION		0x01
+#define GL520_REG_CONF			0x03
+#define GL520_REG_MASK			0x11
+
+#define GL520_REG_VID_INPUT		0x02
+
+#define GL520_REG_IN0_INPUT		0x15
+#define GL520_REG_IN0_LIMIT		0x0c
+#define GL520_REG_IN0_MIN		GL520_REG_IN0_LIMIT
+#define GL520_REG_IN0_MAX		GL520_REG_IN0_LIMIT
+
+#define GL520_REG_IN1_INPUT		0x14
+#define GL520_REG_IN1_LIMIT		0x09
+#define GL520_REG_IN1_MIN		GL520_REG_IN1_LIMIT
+#define GL520_REG_IN1_MAX		GL520_REG_IN1_LIMIT
+
+#define GL520_REG_IN2_INPUT		0x13
+#define GL520_REG_IN2_LIMIT		0x0a
+#define GL520_REG_IN2_MIN		GL520_REG_IN2_LIMIT
+#define GL520_REG_IN2_MAX		GL520_REG_IN2_LIMIT
+
+#define GL520_REG_IN3_INPUT		0x0d
+#define GL520_REG_IN3_LIMIT		0x0b
+#define GL520_REG_IN3_MIN		GL520_REG_IN3_LIMIT
+#define GL520_REG_IN3_MAX		GL520_REG_IN3_LIMIT
+
+#define GL520_REG_IN4_INPUT		0x0e
+#define GL520_REG_IN4_MAX		0x17
+#define GL520_REG_IN4_MIN		0x18
+
+#define GL520_REG_TEMP1_INPUT		0x04
+#define GL520_REG_TEMP1_MAX		0x05
+#define GL520_REG_TEMP1_MAX_HYST	0x06
+
+#define GL520_REG_TEMP2_INPUT		0x0e
+#define GL520_REG_TEMP2_MAX		0x17
+#define GL520_REG_TEMP2_MAX_HYST	0x18
+
+#define GL520_REG_FAN_INPUT		0x07
+#define GL520_REG_FAN_MIN		0x08
+#define GL520_REG_FAN_DIV		0x0f
+#define GL520_REG_FAN_OFF		GL520_REG_FAN_DIV
+
+#define GL520_REG_ALARMS		0x12
+#define GL520_REG_BEEP_MASK		0x10
+#define GL520_REG_BEEP_ENABLE		GL520_REG_CONF
+
+/*
+ * Function declarations
+ */
+
+static int gl520_attach_adapter(struct i2c_adapter *adapter);
+static int gl520_detect(struct i2c_adapter *adapter, int address, int kind);
+static void gl520_init_client(struct i2c_client *client);
+static int gl520_detach_client(struct i2c_client *client);
+static int gl520_read_value(struct i2c_client *client, u8 reg);
+static int gl520_write_value(struct i2c_client *client, u8 reg, u16 value);
+static struct gl520_data *gl520_update_device(struct device *dev);
+
+/* Driver data */
+static struct i2c_driver gl520_driver = {
+	.owner		= THIS_MODULE,
+	.name		= "gl520sm",
+	.id		= I2C_DRIVERID_GL520,
+	.flags		= I2C_DF_NOTIFY,
+	.attach_adapter	= gl520_attach_adapter,
+	.detach_client	= gl520_detach_client,
+};
+
+/* Client data */
+struct gl520_data {
+	struct i2c_client client;
+	struct semaphore update_lock;
+	char valid;		/* zero until the following fields are valid */
+	unsigned long last_updated;	/* in jiffies */
+
+	u8 vid;
+	u8 vrm;
+	u8 in_input[5];		/* [0] = VVD */
+	u8 in_min[5];		/* [0] = VDD */
+	u8 in_max[5];		/* [0] = VDD */
+	u8 fan_input[2];
+	u8 fan_min[2];
+	u8 fan_div[2];
+	u8 fan_off;
+	u8 temp_input[2];
+	u8 temp_max[2];
+	u8 temp_max_hyst[2];
+	u8 alarms;
+	u8 beep_enable;
+	u8 beep_mask;
+	u8 alarm_mask;
+	u8 two_temps;
+};
+
+/*
+ * Sysfs stuff
+ */
+
+#define sysfs_r(type, n, item, reg) \
+static ssize_t get_##type##item (struct gl520_data *, char *, int); \
+static ssize_t get_##type##n##item (struct device *, char *); \
+static ssize_t get_##type##n##item (struct device *dev, char *buf) \
+{ \
+	struct gl520_data *data = gl520_update_device(dev); \
+	return get_##type##item(data, buf, (n)); \
+}
+
+#define sysfs_w(type, n, item, reg) \
+static ssize_t set_##type##item (struct i2c_client *, struct gl520_data *, const char *, size_t, int, int); \
+static ssize_t set_##type##n##item (struct device *, const char *, size_t); \
+static ssize_t set_##type##n##item (struct device *dev, const char *buf, size_t count) \
+{ \
+	struct i2c_client *client = to_i2c_client(dev); \
+	struct gl520_data *data = i2c_get_clientdata(client); \
+	return set_##type##item(client, data, buf, count, (n), reg); \
+}
+
+#define sysfs_rw_n(type, n, item, reg) \
+sysfs_r(type, n, item, reg) \
+sysfs_w(type, n, item, reg) \
+static DEVICE_ATTR(type##n##item, S_IRUGO | S_IWUSR, get_##type##n##item, set_##type##n##item);
+
+#define sysfs_ro_n(type, n, item, reg) \
+sysfs_r(type, n, item, reg) \
+static DEVICE_ATTR(type##n##item, S_IRUGO, get_##type##n##item, NULL);
+
+#define sysfs_rw(type, item, reg) \
+sysfs_r(type, 0, item, reg) \
+sysfs_w(type, 0, item, reg) \
+static DEVICE_ATTR(type##item, S_IRUGO | S_IWUSR, get_##type##0##item, set_##type##0##item);
+
+#define sysfs_ro(type, item, reg) \
+sysfs_r(type, 0, item, reg) \
+static DEVICE_ATTR(type##item, S_IRUGO, get_##type##0##item, NULL);
+
+
+#define sysfs_vid(n) \
+sysfs_ro_n(cpu, n, _vid, GL520_REG_VID_INPUT)
+
+#define device_create_file_vid(client, n) \
+device_create_file(&client->dev, &dev_attr_cpu##n##_vid)
+
+#define sysfs_in(n) \
+sysfs_ro_n(in, n, _input, GL520_REG_IN##n##INPUT) \
+sysfs_rw_n(in, n, _min, GL520_REG_IN##n##_MIN) \
+sysfs_rw_n(in, n, _max, GL520_REG_IN##n##_MAX) \
+
+#define device_create_file_in(client, n) \
+({device_create_file(&client->dev, &dev_attr_in##n##_input); \
+device_create_file(&client->dev, &dev_attr_in##n##_min); \
+device_create_file(&client->dev, &dev_attr_in##n##_max);})
+
+#define sysfs_fan(n) \
+sysfs_ro_n(fan, n, _input, GL520_REG_FAN_INPUT) \
+sysfs_rw_n(fan, n, _min, GL520_REG_FAN_MIN) \
+sysfs_rw_n(fan, n, _div, GL520_REG_FAN_DIV)
+
+#define device_create_file_fan(client, n) \
+({device_create_file(&client->dev, &dev_attr_fan##n##_input); \
+device_create_file(&client->dev, &dev_attr_fan##n##_min); \
+device_create_file(&client->dev, &dev_attr_fan##n##_div);})
+
+#define sysfs_fan_off(n) \
+sysfs_rw_n(fan, n, _off, GL520_REG_FAN_OFF) \
+
+#define device_create_file_fan_off(client, n) \
+device_create_file(&client->dev, &dev_attr_fan##n##_off)
+
+#define sysfs_temp(n) \
+sysfs_ro_n(temp, n, _input, GL520_REG_TEMP##n##_INPUT) \
+sysfs_rw_n(temp, n, _max, GL520_REG_TEMP##n##_MAX) \
+sysfs_rw_n(temp, n, _max_hyst, GL520_REG_TEMP##n##_MAX_HYST)
+
+#define device_create_file_temp(client, n) \
+({device_create_file(&client->dev, &dev_attr_temp##n##_input); \
+device_create_file(&client->dev, &dev_attr_temp##n##_max); \
+device_create_file(&client->dev, &dev_attr_temp##n##_max_hyst);})
+
+#define sysfs_alarms() \
+sysfs_ro(alarms, , GL520_REG_ALARMS) \
+sysfs_rw(beep_enable, , GL520_REG_BEEP_ENABLE) \
+sysfs_rw(beep_mask, , GL520_REG_BEEP_MASK)
+
+#define device_create_file_alarms(client) \
+({device_create_file(&client->dev, &dev_attr_alarms); \
+device_create_file(&client->dev, &dev_attr_beep_enable); \
+device_create_file(&client->dev, &dev_attr_beep_mask);})
+
+
+sysfs_vid(0)
+
+sysfs_in(0)
+sysfs_in(1)
+sysfs_in(2)
+sysfs_in(3)
+sysfs_in(4)
+
+sysfs_fan(1)
+sysfs_fan(2)
+sysfs_fan_off(1)
+
+sysfs_temp(1)
+sysfs_temp(2)
+
+sysfs_alarms()
+
+
+static ssize_t get_cpu_vid(struct gl520_data *data, char *buf, int n)
+{
+	return sprintf(buf, "%u\n", vid_from_reg(data->vid, data->vrm));
+}
+
+#define VDD_FROM_REG(val) (((val)*95+2)/4)
+#define VDD_TO_REG(val) (SENSORS_LIMIT((((val)*4+47)/95),0,255))
+
+#define IN_FROM_REG(val) ((val)*19)
+#define IN_TO_REG(val) (SENSORS_LIMIT((((val)+9)/19),0,255))
+
+static ssize_t get_in_input(struct gl520_data *data, char *buf, int n)
+{
+	u8 r = data->in_input[n];
+
+	if (n == 0)
+		return sprintf(buf, "%d\n", VDD_FROM_REG(r));
+	else
+		return sprintf(buf, "%d\n", IN_FROM_REG(r));
+}
+
+static ssize_t get_in_min(struct gl520_data *data, char *buf, int n)
+{
+	u8 r = data->in_min[n];
+
+	if (n == 0)
+		return sprintf(buf, "%d\n", VDD_FROM_REG(r));
+	else
+		return sprintf(buf, "%d\n", IN_FROM_REG(r));
+}
+
+static ssize_t get_in_max(struct gl520_data *data, char *buf, int n)
+{
+	u8 r = data->in_max[n];
+
+	if (n == 0)
+		return sprintf(buf, "%d\n", VDD_FROM_REG(r));
+	else
+		return sprintf(buf, "%d\n", IN_FROM_REG(r));
+}
+
+static ssize_t set_in_min(struct i2c_client *client, struct gl520_data *data, const char *buf, size_t count, int n, int reg)
+{
+	long v = simple_strtol(buf, NULL, 10);
+	u8 r;
+
+	down(&data->update_lock);
+
+	if (n == 0)
+		r = VDD_TO_REG(v);
+	else
+		r = IN_TO_REG(v);
+
+	data->in_min[n] = r;
+
+	if (n < 4)
+		gl520_write_value(client, reg, (gl520_read_value(client, reg) & ~0xff) | r);
+	else
+		gl520_write_value(client, reg, r);
+
+	up(&data->update_lock);
+	return count;
+}
+
+static ssize_t set_in_max(struct i2c_client *client, struct gl520_data *data, const char *buf, size_t count, int n, int reg)
+{
+	long v = simple_strtol(buf, NULL, 10);
+	u8 r;
+
+	if (n == 0)
+		r = VDD_TO_REG(v);
+	else
+		r = IN_TO_REG(v);
+
+	down(&data->update_lock);
+
+	data->in_max[n] = r;
+
+	if (n < 4)
+		gl520_write_value(client, reg, (gl520_read_value(client, reg) & ~0xff00) | (r << 8));
+	else
+		gl520_write_value(client, reg, r);
+
+	up(&data->update_lock);
+	return count;
+}
+
+#define DIV_FROM_REG(val) (1 << (val))
+#define FAN_FROM_REG(val,div) ((val)==0 ? 0 : (480000/((val) << (div))))
+#define FAN_TO_REG(val,div) ((val)<=0?0:SENSORS_LIMIT((480000 + ((val) << ((div)-1))) / ((val) << (div)), 1, 255));
+
+static ssize_t get_fan_input(struct gl520_data *data, char *buf, int n)
+{
+	return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan_input[n - 1], data->fan_div[n - 1]));
+}
+
+static ssize_t get_fan_min(struct gl520_data *data, char *buf, int n)
+{
+	return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan_min[n - 1], data->fan_div[n - 1]));
+}
+
+static ssize_t get_fan_div(struct gl520_data *data, char *buf, int n)
+{
+	return sprintf(buf, "%d\n", DIV_FROM_REG(data->fan_div[n - 1]));
+}
+
+static ssize_t get_fan_off(struct gl520_data *data, char *buf, int n)
+{
+	return sprintf(buf, "%d\n", data->fan_off);
+}
+
+static ssize_t set_fan_min(struct i2c_client *client, struct gl520_data *data, const char *buf, size_t count, int n, int reg)
+{
+	unsigned long v = simple_strtoul(buf, NULL, 10);
+	u8 r;
+
+	down(&data->update_lock);
+	r = FAN_TO_REG(v, data->fan_div[n - 1]);
+	data->fan_min[n - 1] = r;
+
+	if (n == 1)
+		gl520_write_value(client, reg, (gl520_read_value(client, reg) & ~0xff00) | (r << 8));
+	else
+		gl520_write_value(client, reg, (gl520_read_value(client, reg) & ~0xff) | r);
+
+	data->beep_mask = gl520_read_value(client, GL520_REG_BEEP_MASK);
+	if (data->fan_min[n - 1] == 0)
+		data->alarm_mask &= (n == 1) ? ~0x20 : ~0x40;
+	else
+		data->alarm_mask |= (n == 1) ? 0x20 : 0x40;
+	data->beep_mask &= data->alarm_mask;
+	gl520_write_value(client, GL520_REG_BEEP_MASK, data->beep_mask);
+
+	up(&data->update_lock);
+	return count;
+}
+
+static ssize_t set_fan_div(struct i2c_client *client, struct gl520_data *data, const char *buf, size_t count, int n, int reg)
+{
+	unsigned long v = simple_strtoul(buf, NULL, 10);
+	u8 r;
+
+	switch (v) {
+	case 1: r = 0; break;
+	case 2: r = 1; break;
+	case 4: r = 2; break;
+	case 8: r = 3; break;
+	default:
+		dev_err(&client->dev, "fan_div value %ld not supported. Choose one of 1, 2, 4 or 8!\n", v);
+		return -EINVAL;
+	}
+
+	down(&data->update_lock);
+	data->fan_div[n - 1] = r;
+
+	if (n == 1)
+		gl520_write_value(client, reg, (gl520_read_value(client, reg) & ~0xc0) | (r << 6));
+	else
+		gl520_write_value(client, reg, (gl520_read_value(client, reg) & ~0x30) | (r << 4));
+
+	up(&data->update_lock);
+	return count;
+}
+
+static ssize_t set_fan_off(struct i2c_client *client, struct gl520_data *data, const char *buf, size_t count, int n, int reg)
+{
+	u8 r = simple_strtoul(buf, NULL, 10)?1:0;
+
+	down(&data->update_lock);
+	data->fan_off = r;
+	gl520_write_value(client, reg, (gl520_read_value(client, reg) & ~0x0c) | (r << 2));
+	up(&data->update_lock);
+	return count;
+}
+
+#define TEMP_FROM_REG(val) (((val) - 130) * 1000)
+#define TEMP_TO_REG(val) (SENSORS_LIMIT(((((val)<0?(val)-500:(val)+500) / 1000)+130),0,255))
+
+static ssize_t get_temp_input(struct gl520_data *data, char *buf, int n)
+{
+	return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_input[n - 1]));
+}
+
+static ssize_t get_temp_max(struct gl520_data *data, char *buf, int n)
+{
+	return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_max[n - 1]));
+}
+
+static ssize_t get_temp_max_hyst(struct gl520_data *data, char *buf, int n)
+{
+	return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_max_hyst[n - 1]));
+}
+
+static ssize_t set_temp_max(struct i2c_client *client, struct gl520_data *data, const char *buf, size_t count, int n, int reg)
+{
+	long v = simple_strtol(buf, NULL, 10);
+
+	down(&data->update_lock);
+	data->temp_max[n - 1] = TEMP_TO_REG(v);;
+	gl520_write_value(client, reg, data->temp_max[n - 1]);
+	up(&data->update_lock);
+	return count;
+}
+
+static ssize_t set_temp_max_hyst(struct i2c_client *client, struct gl520_data *data, const char *buf, size_t count, int n, int reg)
+{
+	long v = simple_strtol(buf, NULL, 10);
+
+	down(&data->update_lock);
+	data->temp_max_hyst[n - 1] = TEMP_TO_REG(v);
+	gl520_write_value(client, reg, data->temp_max_hyst[n - 1]);
+	up(&data->update_lock);
+	return count;
+}
+
+static ssize_t get_alarms(struct gl520_data *data, char *buf, int n)
+{
+	return sprintf(buf, "%d\n", data->alarms);
+}
+
+static ssize_t get_beep_enable(struct gl520_data *data, char *buf, int n)
+{
+	return sprintf(buf, "%d\n", data->beep_enable);
+}
+
+static ssize_t get_beep_mask(struct gl520_data *data, char *buf, int n)
+{
+	return sprintf(buf, "%d\n", data->beep_mask);
+}
+
+static ssize_t set_beep_enable(struct i2c_client *client, struct gl520_data *data, const char *buf, size_t count, int n, int reg)
+{
+	u8 r = simple_strtoul(buf, NULL, 10)?0:1;
+
+	down(&data->update_lock);
+	data->beep_enable = !r;
+	gl520_write_value(client, reg, (gl520_read_value(client, reg) & ~0x04) | (r << 2));
+	up(&data->update_lock);
+	return count;
+}
+
+static ssize_t set_beep_mask(struct i2c_client *client, struct gl520_data *data, const char *buf, size_t count, int n, int reg)
+{
+	u8 r = simple_strtoul(buf, NULL, 10);
+	
+	down(&data->update_lock);
+	r &= data->alarm_mask;
+	data->beep_mask = r;
+	gl520_write_value(client, reg, r);
+	up(&data->update_lock);
+	return count;
+}
+
+
+/*
+ * Real code
+ */
+
+static int gl520_attach_adapter(struct i2c_adapter *adapter)
+{
+	if (!(adapter->class & I2C_CLASS_HWMON))
+		return 0;
+	return i2c_detect(adapter, &addr_data, gl520_detect);
+}
+
+static int gl520_detect(struct i2c_adapter *adapter, int address, int kind)
+{
+	struct i2c_client *new_client;
+	struct gl520_data *data;
+	int err = 0;
+
+	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA |
+				     I2C_FUNC_SMBUS_WORD_DATA))
+		goto exit;
+
+	/* OK. For now, we presume we have a valid client. We now create the
+	   client structure, even though we cannot fill it completely yet.
+	   But it allows us to access gl520_{read,write}_value. */
+
+	if (!(data = kmalloc(sizeof(struct gl520_data), GFP_KERNEL))) {
+		err = -ENOMEM;
+		goto exit;
+	}
+	memset(data, 0, sizeof(struct gl520_data));
+
+	new_client = &data->client;
+	i2c_set_clientdata(new_client, data);
+	new_client->addr = address;
+	new_client->adapter = adapter;
+	new_client->driver = &gl520_driver;
+	new_client->flags = 0;
+
+	/* Determine the chip type. */
+	if (kind < 0) {
+		if ((gl520_read_value(new_client, GL520_REG_CHIP_ID) != 0x20) ||
+		    ((gl520_read_value(new_client, GL520_REG_REVISION) & 0x7f) != 0x00) ||
+		    ((gl520_read_value(new_client, GL520_REG_CONF) & 0x80) != 0x00)) {
+			dev_dbg(&new_client->dev, "Unknown chip type, skipping\n");
+			goto exit_free;
+		}
+	}
+
+	/* Fill in the remaining client fields */
+	strlcpy(new_client->name, "gl520sm", I2C_NAME_SIZE);
+	data->valid = 0;
+	init_MUTEX(&data->update_lock);
+
+	/* Tell the I2C layer a new client has arrived */
+	if ((err = i2c_attach_client(new_client)))
+		goto exit_free;
+
+	/* Initialize the GL520SM chip */
+	gl520_init_client(new_client);
+
+	/* Register sysfs hooks */
+	device_create_file_vid(new_client, 0);
+
+	device_create_file_in(new_client, 0);
+	device_create_file_in(new_client, 1);
+	device_create_file_in(new_client, 2);
+	device_create_file_in(new_client, 3);
+	if (!data->two_temps)
+		device_create_file_in(new_client, 4);
+
+	device_create_file_fan(new_client, 1);
+	device_create_file_fan(new_client, 2);
+	device_create_file_fan_off(new_client, 1);
+
+	device_create_file_temp(new_client, 1);
+	if (data->two_temps)
+		device_create_file_temp(new_client, 2);
+
+	device_create_file_alarms(new_client);
+
+	return 0;
+
+exit_free:
+	kfree(data);
+exit:
+	return err;
+}
+
+
+/* Called when we have found a new GL520SM. */
+static void gl520_init_client(struct i2c_client *client)
+{
+	struct gl520_data *data = i2c_get_clientdata(client);
+	u8 oldconf, conf;
+
+	conf = oldconf = gl520_read_value(client, GL520_REG_CONF);
+
+	data->alarm_mask = 0xff;
+	data->vrm = i2c_which_vrm();
+
+	if (extra_sensor_type == 1)
+		conf &= ~0x10;
+	else if (extra_sensor_type == 2)
+		conf |= 0x10;
+	data->two_temps = !(conf & 0x10);
+
+	/* If IRQ# is disabled, we can safely force comparator mode */
+	if (!(conf & 0x20))
+		conf &= 0xf7;
+
+	/* Enable monitoring if needed */
+	conf |= 0x40;
+
+	if (conf != oldconf)
+		gl520_write_value(client, GL520_REG_CONF, conf);
+
+	gl520_update_device(&(client->dev));
+
+	if (data->fan_min[0] == 0)
+		data->alarm_mask &= ~0x20;
+	if (data->fan_min[1] == 0)
+		data->alarm_mask &= ~0x40;
+
+	data->beep_mask &= data->alarm_mask;
+	gl520_write_value(client, GL520_REG_BEEP_MASK, data->beep_mask);
+}
+
+static int gl520_detach_client(struct i2c_client *client)
+{
+	int err;
+
+	if ((err = i2c_detach_client(client))) {
+		dev_err(&client->dev, "Client deregistration failed, "
+			"client not detached.\n");
+		return err;
+	}
+
+	kfree(i2c_get_clientdata(client));
+	return 0;
+}
+
+
+/* Registers 0x07 to 0x0c are word-sized, others are byte-sized 
+   GL520 uses a high-byte first convention */
+static int gl520_read_value(struct i2c_client *client, u8 reg)
+{
+	if ((reg >= 0x07) && (reg <= 0x0c))
+		return swab16(i2c_smbus_read_word_data(client, reg));
+	else
+		return i2c_smbus_read_byte_data(client, reg);
+}
+
+static int gl520_write_value(struct i2c_client *client, u8 reg, u16 value)
+{
+	if ((reg >= 0x07) && (reg <= 0x0c))
+		return i2c_smbus_write_word_data(client, reg, swab16(value));
+	else
+		return i2c_smbus_write_byte_data(client, reg, value);
+}
+
+
+static struct gl520_data *gl520_update_device(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct gl520_data *data = i2c_get_clientdata(client);
+	int val;
+
+	down(&data->update_lock);
+
+	if ((jiffies - data->last_updated > 2 * HZ) ||
+	    (jiffies < data->last_updated) || !data->valid) {
+
+		dev_dbg(&client->dev, "Starting gl520sm update\n");
+
+		data->alarms = gl520_read_value(client, GL520_REG_ALARMS);
+		data->beep_mask = gl520_read_value(client, GL520_REG_BEEP_MASK);
+		data->vid = gl520_read_value(client, GL520_REG_VID_INPUT) & 0x1f;
+
+		val = gl520_read_value(client, GL520_REG_IN0_LIMIT);
+		data->in_min[0] = val & 0xff;
+		data->in_max[0] = (val >> 8) & 0xff;
+		val = gl520_read_value(client, GL520_REG_IN1_LIMIT);
+		data->in_min[1] = val & 0xff;
+		data->in_max[1] = (val >> 8) & 0xff;
+		val = gl520_read_value(client, GL520_REG_IN2_LIMIT);
+		data->in_min[2] = val & 0xff;
+		data->in_max[2] = (val >> 8) & 0xff;
+		val = gl520_read_value(client, GL520_REG_IN3_LIMIT);
+		data->in_min[3] = val & 0xff;
+		data->in_max[3] = (val >> 8) & 0xff;
+
+		val = gl520_read_value(client, GL520_REG_FAN_INPUT);
+		data->fan_input[0] = (val >> 8) & 0xff;
+		data->fan_input[1] = val & 0xff;
+
+		val = gl520_read_value(client, GL520_REG_FAN_MIN);
+		data->fan_min[0] = (val >> 8) & 0xff;
+		data->fan_min[1] = val & 0xff;
+
+		data->temp_input[0] = gl520_read_value(client, GL520_REG_TEMP1_INPUT);
+		data->temp_max[0] = gl520_read_value(client, GL520_REG_TEMP1_MAX);
+		data->temp_max_hyst[0] = gl520_read_value(client, GL520_REG_TEMP1_MAX_HYST);
+
+		val = gl520_read_value(client, GL520_REG_FAN_DIV);
+		data->fan_div[0] = (val >> 6) & 0x03;
+		data->fan_div[1] = (val >> 4) & 0x03;
+		data->fan_off = (val >> 2) & 0x01;
+
+		data->alarms &= data->alarm_mask;
+
+		val = gl520_read_value(client, GL520_REG_CONF);
+		data->beep_enable = !((val >> 2) & 1);
+
+		data->in_input[0] = gl520_read_value(client, GL520_REG_IN0_INPUT);
+		data->in_input[1] = gl520_read_value(client, GL520_REG_IN1_INPUT);
+		data->in_input[2] = gl520_read_value(client, GL520_REG_IN2_INPUT);
+		data->in_input[3] = gl520_read_value(client, GL520_REG_IN3_INPUT);
+
+		/* Temp1 and Vin4 are the same input */
+		if (data->two_temps) {
+			data->temp_input[1] = gl520_read_value(client, GL520_REG_TEMP2_INPUT);
+			data->temp_max[1] = gl520_read_value(client, GL520_REG_TEMP2_MAX);
+			data->temp_max_hyst[1] = gl520_read_value(client, GL520_REG_TEMP2_MAX_HYST);
+		} else {
+			data->in_input[4] = gl520_read_value(client, GL520_REG_IN4_INPUT);
+			data->in_min[4] = gl520_read_value(client, GL520_REG_IN4_MIN);
+			data->in_max[4] = gl520_read_value(client, GL520_REG_IN4_MAX);
+		}
+
+		data->last_updated = jiffies;
+		data->valid = 1;
+	}
+
+	up(&data->update_lock);
+
+	return data;
+}
+
+
+static int __init sensors_gl520sm_init(void)
+{
+	return i2c_add_driver(&gl520_driver);
+}
+
+static void __exit sensors_gl520sm_exit(void)
+{
+	i2c_del_driver(&gl520_driver);
+}
+
+
+MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl>, "
+	"Kyösti Mälkki <kmalkki@cc.hut.fi>, "
+	"Maarten Deprez <maartendeprez@users.sourceforge.net>");
+MODULE_DESCRIPTION("GL520SM driver");
+MODULE_LICENSE("GPL");
+
+module_init(sensors_gl520sm_init);
+module_exit(sensors_gl520sm_exit);
diff --git a/drivers/i2c/chips/isp1301_omap.c b/drivers/i2c/chips/isp1301_omap.c
new file mode 100644
index 00000000000..7f29a8aff16
--- /dev/null
+++ b/drivers/i2c/chips/isp1301_omap.c
@@ -0,0 +1,1658 @@
+/*
+ * isp1301_omap - ISP 1301 USB transceiver, talking to OMAP OTG controller
+ *
+ * Copyright (C) 2004 Texas Instruments
+ * Copyright (C) 2004 David Brownell
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#undef	DEBUG
+#undef	VERBOSE
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/device.h>
+#include <linux/usb_ch9.h>
+#include <linux/usb_gadget.h>
+#include <linux/usb.h>
+#include <linux/usb_otg.h>
+#include <linux/i2c.h>
+#include <linux/workqueue.h>
+
+#include <asm/irq.h>
+#include <asm/arch/usb.h>
+
+
+#ifndef	DEBUG
+#undef	VERBOSE
+#endif
+
+
+#define	DRIVER_VERSION	"24 August 2004"
+#define	DRIVER_NAME	(isp1301_driver.name)
+
+MODULE_DESCRIPTION("ISP1301 USB OTG Transceiver Driver");
+MODULE_LICENSE("GPL");
+
+struct isp1301 {
+	struct otg_transceiver	otg;
+	struct i2c_client	client;
+	void			(*i2c_release)(struct device *dev);
+
+	int			irq;
+
+	u32			last_otg_ctrl;
+	unsigned		working:1;
+
+	struct timer_list	timer;
+
+	/* use keventd context to change the state for us */
+	struct work_struct	work;
+	
+	unsigned long		todo;
+#		define WORK_UPDATE_ISP	0	/* update ISP from OTG */
+#		define WORK_UPDATE_OTG	1	/* update OTG from ISP */
+#		define WORK_HOST_RESUME	4	/* resume host */
+#		define WORK_TIMER	6	/* timer fired */
+#		define WORK_STOP	7	/* don't resubmit */
+};
+
+
+/* bits in OTG_CTRL_REG */
+
+#define	OTG_XCEIV_OUTPUTS \
+	(OTG_ASESSVLD|OTG_BSESSEND|OTG_BSESSVLD|OTG_VBUSVLD|OTG_ID)
+#define	OTG_XCEIV_INPUTS \
+	(OTG_PULLDOWN|OTG_PULLUP|OTG_DRV_VBUS|OTG_PD_VBUS|OTG_PU_VBUS|OTG_PU_ID)
+#define	OTG_CTRL_BITS \
+	(OTG_A_BUSREQ|OTG_A_SETB_HNPEN|OTG_B_BUSREQ|OTG_B_HNPEN|OTG_BUSDROP)
+	/* and OTG_PULLUP is sometimes written */
+
+#define	OTG_CTRL_MASK	(OTG_DRIVER_SEL| \
+	OTG_XCEIV_OUTPUTS|OTG_XCEIV_INPUTS| \
+	OTG_CTRL_BITS)
+
+
+/*-------------------------------------------------------------------------*/
+
+#ifdef	CONFIG_MACH_OMAP_H2
+
+/* board-specific PM hooks */
+
+#include <asm/arch/gpio.h>
+#include <asm/arch/mux.h>
+#include <asm/mach-types.h>
+
+
+#if	defined(CONFIG_TPS65010) || defined(CONFIG_TPS65010_MODULE)
+
+#include <asm/arch/tps65010.h>
+
+#else
+
+static inline int tps65010_set_vbus_draw(unsigned mA)
+{
+	pr_debug("tps65010: draw %d mA (STUB)\n", mA);
+	return 0;
+}
+
+#endif
+
+static void enable_vbus_draw(struct isp1301 *isp, unsigned mA)
+{
+	int status = tps65010_set_vbus_draw(mA);
+	if (status < 0)
+		pr_debug("  VBUS %d mA error %d\n", mA, status);
+}
+
+static void enable_vbus_source(struct isp1301 *isp)
+{
+	/* this board won't supply more than 8mA vbus power.
+	 * some boards can switch a 100ma "unit load" (or more).
+	 */
+}
+
+
+/* products will deliver OTG messages with LEDs, GUI, etc */
+static inline void notresponding(struct isp1301 *isp)
+{
+	printk(KERN_NOTICE "OTG device not responding.\n");
+}
+
+
+#endif
+
+/*-------------------------------------------------------------------------*/
+
+/* only two addresses possible */
+#define	ISP_BASE		0x2c
+static unsigned short normal_i2c[] = {
+	ISP_BASE, ISP_BASE + 1,
+	I2C_CLIENT_END };
+static unsigned short normal_i2c_range[] = { I2C_CLIENT_END };
+
+I2C_CLIENT_INSMOD;
+
+static struct i2c_driver isp1301_driver;
+
+/* smbus apis are used for portability */
+
+static inline u8
+isp1301_get_u8(struct isp1301 *isp, u8 reg)
+{
+	return i2c_smbus_read_byte_data(&isp->client, reg + 0);
+}
+
+static inline int
+isp1301_get_u16(struct isp1301 *isp, u8 reg)
+{
+	return i2c_smbus_read_word_data(&isp->client, reg);
+}
+
+static inline int
+isp1301_set_bits(struct isp1301 *isp, u8 reg, u8 bits)
+{
+	return i2c_smbus_write_byte_data(&isp->client, reg + 0, bits);
+}
+
+static inline int
+isp1301_clear_bits(struct isp1301 *isp, u8 reg, u8 bits)
+{
+	return i2c_smbus_write_byte_data(&isp->client, reg + 1, bits);
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* identification */
+#define	ISP1301_VENDOR_ID		0x00	/* u16 read */
+#define	ISP1301_PRODUCT_ID		0x02	/* u16 read */
+#define	ISP1301_BCD_DEVICE		0x14	/* u16 read */
+
+#define	I2C_VENDOR_ID_PHILIPS		0x04cc
+#define	I2C_PRODUCT_ID_PHILIPS_1301	0x1301
+
+/* operational registers */
+#define	ISP1301_MODE_CONTROL_1		0x04	/* u8 read, set, +1 clear */
+#	define	MC1_SPEED_REG		(1 << 0)
+#	define	MC1_SUSPEND_REG		(1 << 1)
+#	define	MC1_DAT_SE0		(1 << 2)
+#	define	MC1_TRANSPARENT		(1 << 3)
+#	define	MC1_BDIS_ACON_EN	(1 << 4)
+#	define	MC1_OE_INT_EN		(1 << 5)
+#	define	MC1_UART_EN		(1 << 6)
+#	define	MC1_MASK		0x7f
+#define	ISP1301_MODE_CONTROL_2		0x12	/* u8 read, set, +1 clear */
+#	define	MC2_GLOBAL_PWR_DN	(1 << 0)
+#	define	MC2_SPD_SUSP_CTRL	(1 << 1)
+#	define	MC2_BI_DI		(1 << 2)
+#	define	MC2_TRANSP_BDIR0	(1 << 3)
+#	define	MC2_TRANSP_BDIR1	(1 << 4)
+#	define	MC2_AUDIO_EN		(1 << 5)
+#	define	MC2_PSW_EN		(1 << 6)
+#	define	MC2_EN2V7		(1 << 7)
+#define	ISP1301_OTG_CONTROL_1		0x06	/* u8 read, set, +1 clear */
+#	define	OTG1_DP_PULLUP		(1 << 0)
+#	define	OTG1_DM_PULLUP		(1 << 1)
+#	define	OTG1_DP_PULLDOWN	(1 << 2)
+#	define	OTG1_DM_PULLDOWN	(1 << 3)
+#	define	OTG1_ID_PULLDOWN	(1 << 4)
+#	define	OTG1_VBUS_DRV		(1 << 5)
+#	define	OTG1_VBUS_DISCHRG	(1 << 6)
+#	define	OTG1_VBUS_CHRG		(1 << 7)
+#define	ISP1301_OTG_STATUS		0x10	/* u8 readonly */
+#	define	OTG_B_SESS_END		(1 << 6)
+#	define	OTG_B_SESS_VLD		(1 << 7)
+
+#define	ISP1301_INTERRUPT_SOURCE	0x08	/* u8 read */
+#define	ISP1301_INTERRUPT_LATCH		0x0A	/* u8 read, set, +1 clear */
+
+#define	ISP1301_INTERRUPT_FALLING	0x0C	/* u8 read, set, +1 clear */
+#define	ISP1301_INTERRUPT_RISING	0x0E	/* u8 read, set, +1 clear */
+
+/* same bitfields in all interrupt registers */
+#	define	INTR_VBUS_VLD		(1 << 0)
+#	define	INTR_SESS_VLD		(1 << 1)
+#	define	INTR_DP_HI		(1 << 2)
+#	define	INTR_ID_GND		(1 << 3)
+#	define	INTR_DM_HI		(1 << 4)
+#	define	INTR_ID_FLOAT		(1 << 5)
+#	define	INTR_BDIS_ACON		(1 << 6)
+#	define	INTR_CR_INT		(1 << 7)
+
+/*-------------------------------------------------------------------------*/
+
+static const char *state_string(enum usb_otg_state state)
+{
+	switch (state) {
+	case OTG_STATE_A_IDLE:		return "a_idle";
+	case OTG_STATE_A_WAIT_VRISE:	return "a_wait_vrise";
+	case OTG_STATE_A_WAIT_BCON:	return "a_wait_bcon";
+	case OTG_STATE_A_HOST:		return "a_host";
+	case OTG_STATE_A_SUSPEND:	return "a_suspend";
+	case OTG_STATE_A_PERIPHERAL:	return "a_peripheral";
+	case OTG_STATE_A_WAIT_VFALL:	return "a_wait_vfall";
+	case OTG_STATE_A_VBUS_ERR:	return "a_vbus_err";
+	case OTG_STATE_B_IDLE:		return "b_idle";
+	case OTG_STATE_B_SRP_INIT:	return "b_srp_init";
+	case OTG_STATE_B_PERIPHERAL:	return "b_peripheral";
+	case OTG_STATE_B_WAIT_ACON:	return "b_wait_acon";
+	case OTG_STATE_B_HOST:		return "b_host";
+	default:			return "UNDEFINED";
+	}
+}
+
+static inline const char *state_name(struct isp1301 *isp)
+{
+	return state_string(isp->otg.state);
+}
+
+#ifdef	VERBOSE
+#define	dev_vdbg			dev_dbg
+#else
+#define	dev_vdbg(dev, fmt, arg...)	do{}while(0)
+#endif
+
+/*-------------------------------------------------------------------------*/
+
+/* NOTE:  some of this ISP1301 setup is specific to H2 boards;
+ * not everything is guarded by board-specific checks, or even using
+ * omap_usb_config data to deduce MC1_DAT_SE0 and MC2_BI_DI.
+ *
+ * ALSO:  this currently doesn't use ISP1301 low-power modes
+ * while OTG is running.
+ */
+
+static void power_down(struct isp1301 *isp)
+{
+	isp->otg.state = OTG_STATE_UNDEFINED;
+
+	// isp1301_set_bits(isp, ISP1301_MODE_CONTROL_2, MC2_GLOBAL_PWR_DN);
+	isp1301_set_bits(isp, ISP1301_MODE_CONTROL_1, MC1_SUSPEND_REG);
+
+	isp1301_clear_bits(isp, ISP1301_OTG_CONTROL_1, OTG1_ID_PULLDOWN);
+	isp1301_clear_bits(isp, ISP1301_MODE_CONTROL_1, MC1_DAT_SE0);
+}
+
+static void power_up(struct isp1301 *isp)
+{
+	// isp1301_clear_bits(isp, ISP1301_MODE_CONTROL_2, MC2_GLOBAL_PWR_DN);
+	isp1301_clear_bits(isp, ISP1301_MODE_CONTROL_1, MC1_SUSPEND_REG);
+	
+	/* do this only when cpu is driving transceiver,
+	 * so host won't see a low speed device...
+	 */
+	isp1301_set_bits(isp, ISP1301_MODE_CONTROL_1, MC1_DAT_SE0);
+}
+
+#define	NO_HOST_SUSPEND
+
+static int host_suspend(struct isp1301 *isp)
+{
+#ifdef	NO_HOST_SUSPEND
+	return 0;
+#else
+	struct device	*dev;
+
+	if (!isp->otg.host)
+		return -ENODEV;
+
+	/* Currently ASSUMES only the OTG port matters;
+	 * other ports could be active...
+	 */
+	dev = isp->otg.host->controller;
+	return dev->driver->suspend(dev, 3, 0);
+#endif
+}
+
+static int host_resume(struct isp1301 *isp)
+{
+#ifdef	NO_HOST_SUSPEND
+	return 0;
+#else
+	struct device	*dev;
+
+	if (!isp->otg.host)
+		return -ENODEV;
+
+	dev = isp->otg.host->controller;
+	return dev->driver->resume(dev, 0);
+#endif
+}
+
+static int gadget_suspend(struct isp1301 *isp)
+{
+	isp->otg.gadget->b_hnp_enable = 0;
+	isp->otg.gadget->a_hnp_support = 0;
+	isp->otg.gadget->a_alt_hnp_support = 0;
+	return usb_gadget_vbus_disconnect(isp->otg.gadget);
+}
+
+/*-------------------------------------------------------------------------*/
+
+#define	TIMER_MINUTES	10
+#define	TIMER_JIFFIES	(TIMER_MINUTES * 60 * HZ)
+
+/* Almost all our I2C messaging comes from a work queue's task context.
+ * NOTE: guaranteeing certain response times might mean we shouldn't
+ * share keventd's work queue; a realtime task might be safest.
+ */
+void
+isp1301_defer_work(struct isp1301 *isp, int work)
+{
+	int status;
+
+	if (isp && !test_and_set_bit(work, &isp->todo)) {
+		(void) get_device(&isp->client.dev);
+		status = schedule_work(&isp->work);
+		if (!status && !isp->working)
+			dev_vdbg(&isp->client.dev,
+				"work item %d may be lost\n", work);
+	}
+}
+
+/* called from irq handlers */
+static void a_idle(struct isp1301 *isp, const char *tag)
+{
+	if (isp->otg.state == OTG_STATE_A_IDLE)
+		return;
+
+	isp->otg.default_a = 1;
+	if (isp->otg.host) {
+		isp->otg.host->is_b_host = 0;
+		host_suspend(isp);
+	}
+	if (isp->otg.gadget) {
+		isp->otg.gadget->is_a_peripheral = 1;
+		gadget_suspend(isp);
+	}
+	isp->otg.state = OTG_STATE_A_IDLE;
+	isp->last_otg_ctrl = OTG_CTRL_REG = OTG_CTRL_REG & OTG_XCEIV_OUTPUTS;
+	pr_debug("  --> %s/%s\n", state_name(isp), tag);
+}
+
+/* called from irq handlers */
+static void b_idle(struct isp1301 *isp, const char *tag)
+{
+	if (isp->otg.state == OTG_STATE_B_IDLE)
+		return;
+
+	isp->otg.default_a = 0;
+	if (isp->otg.host) {
+		isp->otg.host->is_b_host = 1;
+		host_suspend(isp);
+	}
+	if (isp->otg.gadget) {
+		isp->otg.gadget->is_a_peripheral = 0;
+		gadget_suspend(isp);
+	}
+	isp->otg.state = OTG_STATE_B_IDLE;
+	isp->last_otg_ctrl = OTG_CTRL_REG = OTG_CTRL_REG & OTG_XCEIV_OUTPUTS;
+	pr_debug("  --> %s/%s\n", state_name(isp), tag);
+}
+
+static void
+dump_regs(struct isp1301 *isp, const char *label)
+{
+#ifdef	DEBUG
+	u8	ctrl = isp1301_get_u8(isp, ISP1301_OTG_CONTROL_1);
+	u8	status = isp1301_get_u8(isp, ISP1301_OTG_STATUS);
+	u8	src = isp1301_get_u8(isp, ISP1301_INTERRUPT_SOURCE);
+
+	pr_debug("otg: %06x, %s %s, otg/%02x stat/%02x.%02x\n",
+		OTG_CTRL_REG, label, state_name(isp),
+		ctrl, status, src);
+	/* mode control and irq enables don't change much */
+#endif
+}
+
+/*-------------------------------------------------------------------------*/
+
+#ifdef	CONFIG_USB_OTG
+
+/*
+ * The OMAP OTG controller handles most of the OTG state transitions.
+ *
+ * We translate isp1301 outputs (mostly voltage comparator status) into
+ * OTG inputs; OTG outputs (mostly pullup/pulldown controls) and HNP state
+ * flags into isp1301 inputs ... and infer state transitions.
+ */
+
+#ifdef	VERBOSE
+
+static void check_state(struct isp1301 *isp, const char *tag)
+{
+	enum usb_otg_state	state = OTG_STATE_UNDEFINED;
+	u8			fsm = OTG_TEST_REG & 0x0ff;
+	unsigned		extra = 0;
+
+	switch (fsm) {
+
+	/* default-b */
+	case 0x0:
+		state = OTG_STATE_B_IDLE;
+		break;
+	case 0x3:
+	case 0x7:
+		extra = 1;
+	case 0x1:
+		state = OTG_STATE_B_PERIPHERAL;
+		break;
+	case 0x11:
+		state = OTG_STATE_B_SRP_INIT;
+		break;
+
+	/* extra dual-role default-b states */
+	case 0x12:
+	case 0x13:
+	case 0x16:
+		extra = 1;
+	case 0x17:
+		state = OTG_STATE_B_WAIT_ACON;
+		break;
+	case 0x34:
+		state = OTG_STATE_B_HOST;
+		break;
+
+	/* default-a */
+	case 0x36:
+		state = OTG_STATE_A_IDLE;
+		break;
+	case 0x3c:
+		state = OTG_STATE_A_WAIT_VFALL;
+		break;
+	case 0x7d:
+		state = OTG_STATE_A_VBUS_ERR;
+		break;
+	case 0x9e:
+	case 0x9f:
+		extra = 1;
+	case 0x89:
+		state = OTG_STATE_A_PERIPHERAL;
+		break;
+	case 0xb7:
+		state = OTG_STATE_A_WAIT_VRISE;
+		break;
+	case 0xb8:
+		state = OTG_STATE_A_WAIT_BCON;
+		break;
+	case 0xb9:
+		state = OTG_STATE_A_HOST;
+		break;
+	case 0xba:
+		state = OTG_STATE_A_SUSPEND;
+		break;
+	default:
+		break;
+	}
+	if (isp->otg.state == state && !extra)
+		return;
+	pr_debug("otg: %s FSM %s/%02x, %s, %06x\n", tag,
+		state_string(state), fsm, state_name(isp), OTG_CTRL_REG);
+}
+
+#else
+
+static inline void check_state(struct isp1301 *isp, const char *tag) { }
+
+#endif
+
+/* outputs from ISP1301_INTERRUPT_SOURCE */
+static void update_otg1(struct isp1301 *isp, u8 int_src)
+{
+	u32	otg_ctrl;
+
+	otg_ctrl = OTG_CTRL_REG
+			& OTG_CTRL_MASK
+			& ~OTG_XCEIV_INPUTS
+			& ~(OTG_ID|OTG_ASESSVLD|OTG_VBUSVLD);
+	if (int_src & INTR_SESS_VLD)
+		otg_ctrl |= OTG_ASESSVLD;
+	else if (isp->otg.state == OTG_STATE_A_WAIT_VFALL) {
+		a_idle(isp, "vfall");
+		otg_ctrl &= ~OTG_CTRL_BITS;
+	}
+	if (int_src & INTR_VBUS_VLD)
+		otg_ctrl |= OTG_VBUSVLD;
+	if (int_src & INTR_ID_GND) {		/* default-A */
+		if (isp->otg.state == OTG_STATE_B_IDLE
+				|| isp->otg.state == OTG_STATE_UNDEFINED) {
+			a_idle(isp, "init");
+			return;
+		}
+	} else {				/* default-B */
+		otg_ctrl |= OTG_ID;
+		if (isp->otg.state == OTG_STATE_A_IDLE
+				|| isp->otg.state == OTG_STATE_UNDEFINED) {
+			b_idle(isp, "init");
+			return;
+		}
+	}
+	OTG_CTRL_REG = otg_ctrl;
+}
+
+/* outputs from ISP1301_OTG_STATUS */
+static void update_otg2(struct isp1301 *isp, u8 otg_status)
+{
+	u32	otg_ctrl;
+
+	otg_ctrl = OTG_CTRL_REG
+			& OTG_CTRL_MASK
+			& ~OTG_XCEIV_INPUTS
+			& ~(OTG_BSESSVLD|OTG_BSESSEND);
+	if (otg_status & OTG_B_SESS_VLD)
+		otg_ctrl |= OTG_BSESSVLD;
+	else if (otg_status & OTG_B_SESS_END)
+		otg_ctrl |= OTG_BSESSEND;
+	OTG_CTRL_REG = otg_ctrl;
+}
+
+/* inputs going to ISP1301 */
+static void otg_update_isp(struct isp1301 *isp)
+{
+	u32	otg_ctrl, otg_change;
+	u8	set = OTG1_DM_PULLDOWN, clr = OTG1_DM_PULLUP;
+
+	otg_ctrl = OTG_CTRL_REG;
+	otg_change = otg_ctrl ^ isp->last_otg_ctrl;
+	isp->last_otg_ctrl = otg_ctrl;
+	otg_ctrl = otg_ctrl & OTG_XCEIV_INPUTS;
+
+	switch (isp->otg.state) {
+	case OTG_STATE_B_IDLE:
+	case OTG_STATE_B_PERIPHERAL:
+	case OTG_STATE_B_SRP_INIT:
+		if (!(otg_ctrl & OTG_PULLUP)) {
+			// if (otg_ctrl & OTG_B_HNPEN) {
+			if (isp->otg.gadget->b_hnp_enable) {
+				isp->otg.state = OTG_STATE_B_WAIT_ACON;
+				pr_debug("  --> b_wait_acon\n");
+			}
+			goto pulldown;
+		}
+pullup:
+		set |= OTG1_DP_PULLUP;
+		clr |= OTG1_DP_PULLDOWN;
+		break;
+	case OTG_STATE_A_SUSPEND:
+	case OTG_STATE_A_PERIPHERAL:
+		if (otg_ctrl & OTG_PULLUP)
+			goto pullup;
+		/* FALLTHROUGH */
+	// case OTG_STATE_B_WAIT_ACON:
+	default:
+pulldown:
+		set |= OTG1_DP_PULLDOWN;
+		clr |= OTG1_DP_PULLUP;
+		break;
+	}
+
+#	define toggle(OTG,ISP) do { \
+		if (otg_ctrl & OTG) set |= ISP; \
+		else clr |= ISP; \
+		} while (0)
+
+	if (!(isp->otg.host))
+		otg_ctrl &= ~OTG_DRV_VBUS;
+
+	switch (isp->otg.state) {
+	case OTG_STATE_A_SUSPEND:
+		if (otg_ctrl & OTG_DRV_VBUS) {
+			set |= OTG1_VBUS_DRV;
+			break;
+		}
+		/* HNP failed for some reason (A_AIDL_BDIS timeout) */
+		notresponding(isp);
+
+		/* FALLTHROUGH */
+	case OTG_STATE_A_VBUS_ERR:
+		isp->otg.state = OTG_STATE_A_WAIT_VFALL;
+		pr_debug("  --> a_wait_vfall\n");
+		/* FALLTHROUGH */
+	case OTG_STATE_A_WAIT_VFALL:
+		/* FIXME usbcore thinks port power is still on ... */
+		clr |= OTG1_VBUS_DRV;
+		break;
+	case OTG_STATE_A_IDLE:
+		if (otg_ctrl & OTG_DRV_VBUS) {
+			isp->otg.state = OTG_STATE_A_WAIT_VRISE;
+			pr_debug("  --> a_wait_vrise\n");
+		}
+		/* FALLTHROUGH */
+	default:
+		toggle(OTG_DRV_VBUS, OTG1_VBUS_DRV);
+	}
+
+	toggle(OTG_PU_VBUS, OTG1_VBUS_CHRG);
+	toggle(OTG_PD_VBUS, OTG1_VBUS_DISCHRG);
+
+#	undef toggle
+
+	isp1301_set_bits(isp, ISP1301_OTG_CONTROL_1, set);
+	isp1301_clear_bits(isp, ISP1301_OTG_CONTROL_1, clr);
+
+	/* HNP switch to host or peripheral; and SRP */
+	if (otg_change & OTG_PULLUP) {
+		switch (isp->otg.state) {
+		case OTG_STATE_B_IDLE:
+			if (clr & OTG1_DP_PULLUP)
+				break;
+			isp->otg.state = OTG_STATE_B_PERIPHERAL;
+			pr_debug("  --> b_peripheral\n");
+			break;
+		case OTG_STATE_A_SUSPEND:
+			if (clr & OTG1_DP_PULLUP)
+				break;
+			isp->otg.state = OTG_STATE_A_PERIPHERAL;
+			pr_debug("  --> a_peripheral\n");
+			break;
+		default:
+			break;
+		}
+		OTG_CTRL_REG |= OTG_PULLUP;
+	}
+
+	check_state(isp, __FUNCTION__);
+	dump_regs(isp, "otg->isp1301");
+}
+
+static irqreturn_t omap_otg_irq(int irq, void *_isp, struct pt_regs *regs)
+{
+	u16		otg_irq = OTG_IRQ_SRC_REG;
+	u32		otg_ctrl;
+	int		ret = IRQ_NONE;
+	struct isp1301	*isp = _isp;
+
+	/* update ISP1301 transciever from OTG controller */
+	if (otg_irq & OPRT_CHG) {
+		OTG_IRQ_SRC_REG = OPRT_CHG;
+		isp1301_defer_work(isp, WORK_UPDATE_ISP);
+		ret = IRQ_HANDLED;
+
+	/* SRP to become b_peripheral failed */
+	} else if (otg_irq & B_SRP_TMROUT) {
+		pr_debug("otg: B_SRP_TIMEOUT, %06x\n", OTG_CTRL_REG);
+		notresponding(isp);
+
+		/* gadget drivers that care should monitor all kinds of
+		 * remote wakeup (SRP, normal) using their own timer
+		 * to give "check cable and A-device" messages.
+		 */
+		if (isp->otg.state == OTG_STATE_B_SRP_INIT)
+			b_idle(isp, "srp_timeout");
+
+		OTG_IRQ_SRC_REG = B_SRP_TMROUT;
+		ret = IRQ_HANDLED;
+
+	/* HNP to become b_host failed */
+	} else if (otg_irq & B_HNP_FAIL) {
+		pr_debug("otg: %s B_HNP_FAIL, %06x\n",
+				state_name(isp), OTG_CTRL_REG);
+		notresponding(isp);
+
+		otg_ctrl = OTG_CTRL_REG;
+		otg_ctrl |= OTG_BUSDROP;
+		otg_ctrl &= OTG_CTRL_MASK & ~OTG_XCEIV_INPUTS;
+		OTG_CTRL_REG = otg_ctrl;
+
+		/* subset of b_peripheral()... */
+		isp->otg.state = OTG_STATE_B_PERIPHERAL;
+		pr_debug("  --> b_peripheral\n");
+
+		OTG_IRQ_SRC_REG = B_HNP_FAIL;
+		ret = IRQ_HANDLED;
+
+	/* detect SRP from B-device ... */
+	} else if (otg_irq & A_SRP_DETECT) {
+		pr_debug("otg: %s SRP_DETECT, %06x\n",
+				state_name(isp), OTG_CTRL_REG);
+
+		isp1301_defer_work(isp, WORK_UPDATE_OTG);
+		switch (isp->otg.state) {
+		case OTG_STATE_A_IDLE:
+			if (!isp->otg.host)
+				break;
+			isp1301_defer_work(isp, WORK_HOST_RESUME);
+			otg_ctrl = OTG_CTRL_REG;
+			otg_ctrl |= OTG_A_BUSREQ;
+			otg_ctrl &= ~(OTG_BUSDROP|OTG_B_BUSREQ)
+					& ~OTG_XCEIV_INPUTS
+					& OTG_CTRL_MASK;
+			OTG_CTRL_REG = otg_ctrl;
+			break;
+		default:
+			break;
+		}
+
+		OTG_IRQ_SRC_REG = A_SRP_DETECT;
+		ret = IRQ_HANDLED;
+
+	/* timer expired:  T(a_wait_bcon) and maybe T(a_wait_vrise)
+	 * we don't track them separately
+	 */
+	} else if (otg_irq & A_REQ_TMROUT) {
+		otg_ctrl = OTG_CTRL_REG;
+		pr_info("otg: BCON_TMOUT from %s, %06x\n",
+				state_name(isp), otg_ctrl);
+		notresponding(isp);
+
+		otg_ctrl |= OTG_BUSDROP;
+		otg_ctrl &= ~OTG_A_BUSREQ & OTG_CTRL_MASK & ~OTG_XCEIV_INPUTS;
+		OTG_CTRL_REG = otg_ctrl;
+		isp->otg.state = OTG_STATE_A_WAIT_VFALL;
+
+		OTG_IRQ_SRC_REG = A_REQ_TMROUT;
+		ret = IRQ_HANDLED;
+
+	/* A-supplied voltage fell too low; overcurrent */
+	} else if (otg_irq & A_VBUS_ERR) {
+		otg_ctrl = OTG_CTRL_REG;
+		printk(KERN_ERR "otg: %s, VBUS_ERR %04x ctrl %06x\n",
+			state_name(isp), otg_irq, otg_ctrl);
+
+		otg_ctrl |= OTG_BUSDROP;
+		otg_ctrl &= ~OTG_A_BUSREQ & OTG_CTRL_MASK & ~OTG_XCEIV_INPUTS;
+		OTG_CTRL_REG = otg_ctrl;
+		isp->otg.state = OTG_STATE_A_VBUS_ERR;
+
+		OTG_IRQ_SRC_REG = A_VBUS_ERR;
+		ret = IRQ_HANDLED;
+
+	/* switch driver; the transciever code activates it,
+	 * ungating the udc clock or resuming OHCI.
+	 */
+	} else if (otg_irq & DRIVER_SWITCH) {
+		int	kick = 0;
+
+		otg_ctrl = OTG_CTRL_REG;
+		printk(KERN_NOTICE "otg: %s, SWITCH to %s, ctrl %06x\n",
+				state_name(isp),
+				(otg_ctrl & OTG_DRIVER_SEL)
+					? "gadget" : "host",
+				otg_ctrl);
+		isp1301_defer_work(isp, WORK_UPDATE_ISP);
+
+		/* role is peripheral */
+		if (otg_ctrl & OTG_DRIVER_SEL) {
+			switch (isp->otg.state) {
+			case OTG_STATE_A_IDLE:
+				b_idle(isp, __FUNCTION__);
+				break;
+			default:
+				break;
+			}
+			isp1301_defer_work(isp, WORK_UPDATE_ISP);
+
+		/* role is host */
+		} else {
+			if (!(otg_ctrl & OTG_ID)) {
+		 		otg_ctrl &= OTG_CTRL_MASK & ~OTG_XCEIV_INPUTS;
+				OTG_CTRL_REG = otg_ctrl | OTG_A_BUSREQ;
+			}
+
+			if (isp->otg.host) {
+				switch (isp->otg.state) {
+				case OTG_STATE_B_WAIT_ACON:
+					isp->otg.state = OTG_STATE_B_HOST;
+					pr_debug("  --> b_host\n");
+					kick = 1;
+					break;
+				case OTG_STATE_A_WAIT_BCON:
+					isp->otg.state = OTG_STATE_A_HOST;
+					pr_debug("  --> a_host\n");
+					break;
+				case OTG_STATE_A_PERIPHERAL:
+					isp->otg.state = OTG_STATE_A_WAIT_BCON;
+					pr_debug("  --> a_wait_bcon\n");
+					break;
+				default:
+					break;
+				}
+				isp1301_defer_work(isp, WORK_HOST_RESUME);
+			}
+		}
+
+		OTG_IRQ_SRC_REG = DRIVER_SWITCH;
+		ret = IRQ_HANDLED;
+
+		if (kick)
+			usb_bus_start_enum(isp->otg.host,
+						isp->otg.host->otg_port);
+	}
+
+	check_state(isp, __FUNCTION__);
+	return ret;
+}
+
+static struct platform_device *otg_dev;
+
+static int otg_init(struct isp1301 *isp)
+{
+	if (!otg_dev)
+		return -ENODEV;
+
+	dump_regs(isp, __FUNCTION__);
+	/* some of these values are board-specific... */
+	OTG_SYSCON_2_REG |= OTG_EN
+		/* for B-device: */
+		| SRP_GPDATA		/* 9msec Bdev D+ pulse */
+		| SRP_GPDVBUS		/* discharge after VBUS pulse */
+		// | (3 << 24)		/* 2msec VBUS pulse */
+		/* for A-device: */
+		| (0 << 20)		/* 200ms nominal A_WAIT_VRISE timer */
+		| SRP_DPW		/* detect 167+ns SRP pulses */
+		| SRP_DATA | SRP_VBUS	/* accept both kinds of SRP pulse */
+		;
+
+	update_otg1(isp, isp1301_get_u8(isp, ISP1301_INTERRUPT_SOURCE));
+	update_otg2(isp, isp1301_get_u8(isp, ISP1301_OTG_STATUS));
+
+	check_state(isp, __FUNCTION__);
+	pr_debug("otg: %s, %s %06x\n",
+			state_name(isp), __FUNCTION__, OTG_CTRL_REG);
+
+	OTG_IRQ_EN_REG = DRIVER_SWITCH | OPRT_CHG
+			| B_SRP_TMROUT | B_HNP_FAIL
+			| A_VBUS_ERR | A_SRP_DETECT | A_REQ_TMROUT;
+	OTG_SYSCON_2_REG |= OTG_EN;
+
+	return 0;
+}
+
+static int otg_probe(struct device *dev)
+{
+	// struct omap_usb_config *config = dev->platform_data;
+
+	otg_dev = to_platform_device(dev);
+	return 0;
+}
+
+static int otg_remove(struct device *dev)
+{
+	otg_dev = 0;
+	return 0;
+}
+
+struct device_driver omap_otg_driver = {
+	.name		= "omap_otg",
+	.bus		= &platform_bus_type,
+	.probe		= otg_probe,
+	.remove		= otg_remove,	
+};
+
+static int otg_bind(struct isp1301 *isp)
+{
+	int	status;
+
+	if (otg_dev)
+		return -EBUSY;
+
+	status = driver_register(&omap_otg_driver);
+	if (status < 0)
+		return status;
+
+	if (otg_dev)
+		status = request_irq(otg_dev->resource[1].start, omap_otg_irq,
+				SA_INTERRUPT, DRIVER_NAME, isp);
+	else
+		status = -ENODEV;
+
+	if (status < 0)
+		driver_unregister(&omap_otg_driver);
+	return status;
+}
+
+static void otg_unbind(struct isp1301 *isp)
+{
+	if (!otg_dev)
+		return;
+	free_irq(otg_dev->resource[1].start, isp);
+}
+
+#else
+
+/* OTG controller isn't clocked */
+
+#endif	/* CONFIG_USB_OTG */
+
+/*-------------------------------------------------------------------------*/
+
+static void b_peripheral(struct isp1301 *isp)
+{
+	OTG_CTRL_REG = OTG_CTRL_REG & OTG_XCEIV_OUTPUTS;
+	usb_gadget_vbus_connect(isp->otg.gadget);
+
+#ifdef	CONFIG_USB_OTG
+	enable_vbus_draw(isp, 8);
+	otg_update_isp(isp);
+#else
+	enable_vbus_draw(isp, 100);
+	/* UDC driver just set OTG_BSESSVLD */
+	isp1301_set_bits(isp, ISP1301_OTG_CONTROL_1, OTG1_DP_PULLUP);
+	isp1301_clear_bits(isp, ISP1301_OTG_CONTROL_1, OTG1_DP_PULLDOWN);
+	isp->otg.state = OTG_STATE_B_PERIPHERAL;
+	pr_debug("  --> b_peripheral\n");
+	dump_regs(isp, "2periph");
+#endif
+}
+
+static void isp_update_otg(struct isp1301 *isp, u8 stat)
+{
+	u8			isp_stat, isp_bstat;
+	enum usb_otg_state	state = isp->otg.state;
+
+	if (stat & INTR_BDIS_ACON)
+		pr_debug("OTG:  BDIS_ACON, %s\n", state_name(isp));
+
+	/* start certain state transitions right away */
+	isp_stat = isp1301_get_u8(isp, ISP1301_INTERRUPT_SOURCE);
+	if (isp_stat & INTR_ID_GND) {
+		if (isp->otg.default_a) {
+			switch (state) {
+			case OTG_STATE_B_IDLE:
+				a_idle(isp, "idle");
+				/* FALLTHROUGH */
+			case OTG_STATE_A_IDLE:
+				enable_vbus_source(isp);
+				/* FALLTHROUGH */
+			case OTG_STATE_A_WAIT_VRISE:
+				/* we skip over OTG_STATE_A_WAIT_BCON, since
+				 * the HC will transition to A_HOST (or
+				 * A_SUSPEND!) without our noticing except
+				 * when HNP is used.
+				 */
+				if (isp_stat & INTR_VBUS_VLD)
+					isp->otg.state = OTG_STATE_A_HOST;
+				break;
+			case OTG_STATE_A_WAIT_VFALL:
+				if (!(isp_stat & INTR_SESS_VLD))
+					a_idle(isp, "vfell");
+				break;
+			default:
+				if (!(isp_stat & INTR_VBUS_VLD))
+					isp->otg.state = OTG_STATE_A_VBUS_ERR;
+				break;
+			}
+			isp_bstat = isp1301_get_u8(isp, ISP1301_OTG_STATUS);
+		} else {
+			switch (state) {
+			case OTG_STATE_B_PERIPHERAL:
+			case OTG_STATE_B_HOST:
+			case OTG_STATE_B_WAIT_ACON:
+				usb_gadget_vbus_disconnect(isp->otg.gadget);
+				break;
+			default:
+				break;
+			}
+			if (state != OTG_STATE_A_IDLE)
+				a_idle(isp, "id");
+			if (isp->otg.host && state == OTG_STATE_A_IDLE)
+				isp1301_defer_work(isp, WORK_HOST_RESUME);
+			isp_bstat = 0;
+		}
+	} else {
+		/* if user unplugged mini-A end of cable,
+		 * don't bypass A_WAIT_VFALL.
+		 */
+		if (isp->otg.default_a) {
+			switch (state) {
+			default:
+				isp->otg.state = OTG_STATE_A_WAIT_VFALL;
+				break;
+			case OTG_STATE_A_WAIT_VFALL:
+				state = OTG_STATE_A_IDLE;
+				/* khubd may take a while to notice and
+				 * handle this disconnect, so don't go
+				 * to B_IDLE quite yet.
+				 */
+				break;
+			case OTG_STATE_A_IDLE:
+				host_suspend(isp);
+				isp1301_clear_bits(isp, ISP1301_MODE_CONTROL_1,
+						MC1_BDIS_ACON_EN);
+				isp->otg.state = OTG_STATE_B_IDLE;
+				OTG_CTRL_REG &= OTG_CTRL_REG & OTG_CTRL_MASK
+						& ~OTG_CTRL_BITS;
+				break;
+			case OTG_STATE_B_IDLE:
+				break;
+			}
+		}
+		isp_bstat = isp1301_get_u8(isp, ISP1301_OTG_STATUS);
+
+		switch (isp->otg.state) {
+		case OTG_STATE_B_PERIPHERAL:
+		case OTG_STATE_B_WAIT_ACON:
+		case OTG_STATE_B_HOST:
+			if (likely(isp_bstat & OTG_B_SESS_VLD))
+				break;
+			enable_vbus_draw(isp, 0);
+#ifndef	CONFIG_USB_OTG
+			/* UDC driver will clear OTG_BSESSVLD */
+			isp1301_set_bits(isp, ISP1301_OTG_CONTROL_1,
+						OTG1_DP_PULLDOWN);
+			isp1301_clear_bits(isp, ISP1301_OTG_CONTROL_1,
+						OTG1_DP_PULLUP);
+			dump_regs(isp, __FUNCTION__);
+#endif
+			/* FALLTHROUGH */
+		case OTG_STATE_B_SRP_INIT:
+			b_idle(isp, __FUNCTION__);
+			OTG_CTRL_REG &= OTG_CTRL_REG & OTG_XCEIV_OUTPUTS;
+			/* FALLTHROUGH */
+		case OTG_STATE_B_IDLE:
+			if (isp->otg.gadget && (isp_bstat & OTG_B_SESS_VLD)) {
+#ifdef	CONFIG_USB_OTG
+				update_otg1(isp, isp_stat);
+				update_otg2(isp, isp_bstat);
+#endif
+				b_peripheral(isp);
+			} else if (!(isp_stat & (INTR_VBUS_VLD|INTR_SESS_VLD)))
+				isp_bstat |= OTG_B_SESS_END;
+			break;
+		case OTG_STATE_A_WAIT_VFALL:
+			break;
+		default:
+			pr_debug("otg: unsupported b-device %s\n",
+				state_name(isp));
+			break;
+		}
+	}
+
+	if (state != isp->otg.state)
+		pr_debug("  isp, %s -> %s\n",
+				state_string(state), state_name(isp));
+
+#ifdef	CONFIG_USB_OTG
+	/* update the OTG controller state to match the isp1301; may
+	 * trigger OPRT_CHG irqs for changes going to the isp1301.
+	 */
+	update_otg1(isp, isp_stat);
+	update_otg2(isp, isp_bstat);
+	check_state(isp, __FUNCTION__);
+#endif
+
+	dump_regs(isp, "isp1301->otg");
+}
+
+/*-------------------------------------------------------------------------*/
+
+static u8 isp1301_clear_latch(struct isp1301 *isp)
+{
+	u8 latch = isp1301_get_u8(isp, ISP1301_INTERRUPT_LATCH);
+	isp1301_clear_bits(isp, ISP1301_INTERRUPT_LATCH, latch);
+	return latch;
+}
+
+static void
+isp1301_work(void *data)
+{
+	struct isp1301	*isp = data;
+	int		stop;
+
+	/* implicit lock:  we're the only task using this device */
+	isp->working = 1;
+	do {
+		stop = test_bit(WORK_STOP, &isp->todo);
+
+#ifdef	CONFIG_USB_OTG
+		/* transfer state from otg engine to isp1301 */
+		if (test_and_clear_bit(WORK_UPDATE_ISP, &isp->todo)) {
+			otg_update_isp(isp);
+			put_device(&isp->client.dev);
+		}
+#endif
+		/* transfer state from isp1301 to otg engine */
+		if (test_and_clear_bit(WORK_UPDATE_OTG, &isp->todo)) {
+			u8		stat = isp1301_clear_latch(isp);
+
+			isp_update_otg(isp, stat);
+			put_device(&isp->client.dev);
+		}
+
+		if (test_and_clear_bit(WORK_HOST_RESUME, &isp->todo)) {
+			u32	otg_ctrl;
+
+			/*
+			 * skip A_WAIT_VRISE; hc transitions invisibly
+			 * skip A_WAIT_BCON; same.
+			 */
+			switch (isp->otg.state) {
+			case OTG_STATE_A_WAIT_BCON:
+			case OTG_STATE_A_WAIT_VRISE:
+				isp->otg.state = OTG_STATE_A_HOST;
+				pr_debug("  --> a_host\n");
+				otg_ctrl = OTG_CTRL_REG;
+				otg_ctrl |= OTG_A_BUSREQ;
+				otg_ctrl &= ~(OTG_BUSDROP|OTG_B_BUSREQ)
+						& OTG_CTRL_MASK;
+				OTG_CTRL_REG = otg_ctrl;
+				break;
+			case OTG_STATE_B_WAIT_ACON:
+				isp->otg.state = OTG_STATE_B_HOST;
+				pr_debug("  --> b_host (acon)\n");
+				break;
+			case OTG_STATE_B_HOST:
+			case OTG_STATE_B_IDLE:
+			case OTG_STATE_A_IDLE:
+				break;
+			default:
+				pr_debug("  host resume in %s\n",
+						state_name(isp));
+			}
+			host_resume(isp);
+			// mdelay(10);
+			put_device(&isp->client.dev);
+		}
+
+		if (test_and_clear_bit(WORK_TIMER, &isp->todo)) {
+#ifdef	VERBOSE
+			dump_regs(isp, "timer");
+			if (!stop)
+				mod_timer(&isp->timer, jiffies + TIMER_JIFFIES);
+#endif
+			put_device(&isp->client.dev);
+		}
+
+		if (isp->todo)
+			dev_vdbg(&isp->client.dev,
+				"work done, todo = 0x%lx\n",
+				isp->todo);
+		if (stop) {
+			dev_dbg(&isp->client.dev, "stop\n");
+			break;
+		}
+	} while (isp->todo);
+	isp->working = 0;
+}
+
+static irqreturn_t isp1301_irq(int irq, void *isp, struct pt_regs *regs)
+{
+	isp1301_defer_work(isp, WORK_UPDATE_OTG);
+	return IRQ_HANDLED;
+}
+
+static void isp1301_timer(unsigned long _isp)
+{
+	isp1301_defer_work((void *)_isp, WORK_TIMER);
+}
+
+/*-------------------------------------------------------------------------*/
+
+static void isp1301_release(struct device *dev)
+{
+	struct isp1301	*isp;
+
+	isp = container_of(dev, struct isp1301, client.dev);
+
+	/* ugly -- i2c hijacks our memory hook to wait_for_completion() */
+	if (isp->i2c_release)
+		isp->i2c_release(dev);
+	kfree (isp);
+}
+
+static struct isp1301 *the_transceiver;
+
+static int isp1301_detach_client(struct i2c_client *i2c)
+{
+	struct isp1301	*isp;
+
+	isp = container_of(i2c, struct isp1301, client);
+
+	isp1301_clear_bits(isp, ISP1301_INTERRUPT_FALLING, ~0);
+	isp1301_clear_bits(isp, ISP1301_INTERRUPT_RISING, ~0);
+	free_irq(isp->irq, isp);
+#ifdef	CONFIG_USB_OTG
+	otg_unbind(isp);
+#endif
+	if (machine_is_omap_h2())
+		omap_free_gpio(2);
+
+	isp->timer.data = 0;
+	set_bit(WORK_STOP, &isp->todo);
+	del_timer_sync(&isp->timer);
+	flush_scheduled_work();
+
+	put_device(&i2c->dev);
+	the_transceiver = 0;
+
+	return i2c_detach_client(i2c);
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* NOTE:  three modes are possible here, only one of which
+ * will be standards-conformant on any given system:
+ *
+ *  - OTG mode (dual-role), required if there's a Mini-AB connector
+ *  - HOST mode, for when there's one or more A (host) connectors
+ *  - DEVICE mode, for when there's a B/Mini-B (device) connector
+ *
+ * As a rule, you won't have an isp1301 chip unless it's there to
+ * support the OTG mode.  Other modes help testing USB controllers 
+ * in isolation from (full) OTG support, or maybe so later board
+ * revisions can help to support those feature.
+ */
+
+#ifdef	CONFIG_USB_OTG
+
+static int isp1301_otg_enable(struct isp1301 *isp)
+{
+	power_up(isp);
+	otg_init(isp);
+
+	/* NOTE:  since we don't change this, this provides
+	 * a few more interrupts than are strictly needed.
+	 */
+	isp1301_set_bits(isp, ISP1301_INTERRUPT_RISING,
+	 	INTR_VBUS_VLD | INTR_SESS_VLD | INTR_ID_GND);
+	isp1301_set_bits(isp, ISP1301_INTERRUPT_FALLING,
+	 	INTR_VBUS_VLD | INTR_SESS_VLD | INTR_ID_GND);
+
+	dev_info(&isp->client.dev, "ready for dual-role USB ...\n");
+
+	return 0;
+}
+
+#endif
+
+/* add or disable the host device+driver */
+static int
+isp1301_set_host(struct otg_transceiver *otg, struct usb_bus *host)
+{
+	struct isp1301	*isp = container_of(otg, struct isp1301, otg);
+
+	if (!otg || isp != the_transceiver)
+		return -ENODEV;
+
+	if (!host) {
+		OTG_IRQ_EN_REG = 0;
+		power_down(isp);
+		isp->otg.host = 0;
+		return 0;
+	}
+
+#ifdef	CONFIG_USB_OTG
+	isp->otg.host = host;
+	dev_dbg(&isp->client.dev, "registered host\n");
+	host_suspend(isp);
+	if (isp->otg.gadget)
+		return isp1301_otg_enable(isp);
+	return 0;
+
+#elif	!defined(CONFIG_USB_GADGET_OMAP)
+	// FIXME update its refcount
+	isp->otg.host = host;
+
+	power_up(isp);
+
+	if (machine_is_omap_h2())
+		isp1301_set_bits(isp, ISP1301_MODE_CONTROL_1, MC1_DAT_SE0);
+
+	dev_info(&isp->client.dev, "A-Host sessions ok\n");
+	isp1301_set_bits(isp, ISP1301_INTERRUPT_RISING,
+	 	INTR_ID_GND);
+	isp1301_set_bits(isp, ISP1301_INTERRUPT_FALLING,
+	 	INTR_ID_GND);
+
+	/* If this has a Mini-AB connector, this mode is highly
+	 * nonstandard ... but can be handy for testing, especially with
+	 * the Mini-A end of an OTG cable.  (Or something nonstandard
+	 * like MiniB-to-StandardB, maybe built with a gender mender.)
+	 */
+	isp1301_set_bits(isp, ISP1301_OTG_CONTROL_1, OTG1_VBUS_DRV);
+
+	dump_regs(isp, __FUNCTION__);
+
+	return 0;
+
+#else
+	dev_dbg(&isp->client.dev, "host sessions not allowed\n");
+	return -EINVAL;
+#endif
+
+}
+
+static int
+isp1301_set_peripheral(struct otg_transceiver *otg, struct usb_gadget *gadget)
+{
+	struct isp1301	*isp = container_of(otg, struct isp1301, otg);
+
+	if (!otg || isp != the_transceiver)
+		return -ENODEV;
+
+	if (!gadget) {
+		OTG_IRQ_EN_REG = 0;
+		if (!isp->otg.default_a)
+			enable_vbus_draw(isp, 0);
+		usb_gadget_vbus_disconnect(isp->otg.gadget);
+		isp->otg.gadget = 0;
+		power_down(isp);
+		return 0;
+	}
+
+#ifdef	CONFIG_USB_OTG
+	isp->otg.gadget = gadget;
+	dev_dbg(&isp->client.dev, "registered gadget\n");
+	/* gadget driver may be suspended until vbus_connect () */
+	if (isp->otg.host)
+		return isp1301_otg_enable(isp);
+	return 0;
+
+#elif	!defined(CONFIG_USB_OHCI_HCD) && !defined(CONFIG_USB_OHCI_HCD_MODULE)
+	isp->otg.gadget = gadget;
+	// FIXME update its refcount
+
+	OTG_CTRL_REG = (OTG_CTRL_REG & OTG_CTRL_MASK
+				& ~(OTG_XCEIV_OUTPUTS|OTG_CTRL_BITS))
+			| OTG_ID;
+	power_up(isp);
+	isp->otg.state = OTG_STATE_B_IDLE;
+
+	if (machine_is_omap_h2())
+		isp1301_set_bits(isp, ISP1301_MODE_CONTROL_1, MC1_DAT_SE0);
+
+	isp1301_set_bits(isp, ISP1301_INTERRUPT_RISING,
+	 	INTR_SESS_VLD);
+	isp1301_set_bits(isp, ISP1301_INTERRUPT_FALLING,
+	 	INTR_VBUS_VLD);
+	dev_info(&isp->client.dev, "B-Peripheral sessions ok\n");
+	dump_regs(isp, __FUNCTION__);
+
+	/* If this has a Mini-AB connector, this mode is highly
+	 * nonstandard ... but can be handy for testing, so long
+	 * as you don't plug a Mini-A cable into the jack.
+	 */
+	if (isp1301_get_u8(isp, ISP1301_INTERRUPT_SOURCE) & INTR_VBUS_VLD)
+		b_peripheral(isp);
+
+	return 0;
+
+#else
+	dev_dbg(&isp->client.dev, "peripheral sessions not allowed\n");
+	return -EINVAL;
+#endif
+}
+
+
+/*-------------------------------------------------------------------------*/
+
+static int
+isp1301_set_power(struct otg_transceiver *dev, unsigned mA)
+{
+	if (!the_transceiver)
+		return -ENODEV;
+	if (dev->state == OTG_STATE_B_PERIPHERAL)
+		enable_vbus_draw(the_transceiver, mA);
+	return 0;
+}
+
+static int
+isp1301_start_srp(struct otg_transceiver *dev)
+{
+	struct isp1301	*isp = container_of(dev, struct isp1301, otg);
+	u32		otg_ctrl;
+
+	if (!dev || isp != the_transceiver
+			|| isp->otg.state != OTG_STATE_B_IDLE)
+		return -ENODEV;
+
+	otg_ctrl = OTG_CTRL_REG;
+	if (!(otg_ctrl & OTG_BSESSEND))
+		return -EINVAL;
+
+	otg_ctrl |= OTG_B_BUSREQ;
+	otg_ctrl &= ~OTG_A_BUSREQ & OTG_CTRL_MASK;
+	OTG_CTRL_REG = otg_ctrl;
+	isp->otg.state = OTG_STATE_B_SRP_INIT;
+
+	pr_debug("otg: SRP, %s ... %06x\n", state_name(isp), OTG_CTRL_REG);
+#ifdef	CONFIG_USB_OTG
+	check_state(isp, __FUNCTION__);
+#endif
+	return 0;
+}
+
+static int
+isp1301_start_hnp(struct otg_transceiver *dev)
+{
+#ifdef	CONFIG_USB_OTG
+	struct isp1301	*isp = container_of(dev, struct isp1301, otg);
+
+	if (!dev || isp != the_transceiver)
+		return -ENODEV;
+	if (isp->otg.default_a && (isp->otg.host == NULL
+			|| !isp->otg.host->b_hnp_enable))
+		return -ENOTCONN;
+	if (!isp->otg.default_a && (isp->otg.gadget == NULL
+			|| !isp->otg.gadget->b_hnp_enable))
+		return -ENOTCONN;
+
+	/* We want hardware to manage most HNP protocol timings.
+	 * So do this part as early as possible...
+	 */
+	switch (isp->otg.state) {
+	case OTG_STATE_B_HOST:
+		isp->otg.state = OTG_STATE_B_PERIPHERAL;
+		/* caller will suspend next */
+		break;
+	case OTG_STATE_A_HOST:
+#if 0
+		/* autoconnect mode avoids irq latency bugs */
+		isp1301_set_bits(isp, ISP1301_MODE_CONTROL_1,
+				MC1_BDIS_ACON_EN);
+#endif
+		/* caller must suspend then clear A_BUSREQ */
+		usb_gadget_vbus_connect(isp->otg.gadget);
+		OTG_CTRL_REG |= OTG_A_SETB_HNPEN;
+
+		break;
+	case OTG_STATE_A_PERIPHERAL:
+		/* initiated by B-Host suspend */
+		break;
+	default:
+		return -EILSEQ;
+	}
+	pr_debug("otg: HNP %s, %06x ...\n",
+		state_name(isp), OTG_CTRL_REG);
+	check_state(isp, __FUNCTION__);
+	return 0;
+#else
+	/* srp-only */
+	return -EINVAL;
+#endif
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* no error returns, they'd just make bus scanning stop */
+static int isp1301_probe(struct i2c_adapter *bus, int address, int kind)
+{
+	int			status;
+	struct isp1301		*isp;
+	struct i2c_client	*i2c;
+
+	if (the_transceiver)
+		return 0;
+
+	isp = kcalloc(1, sizeof *isp, GFP_KERNEL);
+	if (!isp)
+		return 0;
+
+	INIT_WORK(&isp->work, isp1301_work, isp);
+	init_timer(&isp->timer);
+	isp->timer.function = isp1301_timer;
+	isp->timer.data = (unsigned long) isp;
+
+	isp->irq = -1;
+	isp->client.addr = address;
+	i2c_set_clientdata(&isp->client, isp);
+	isp->client.adapter = bus;
+	isp->client.driver = &isp1301_driver;
+	strlcpy(isp->client.name, DRIVER_NAME, I2C_NAME_SIZE);
+	i2c = &isp->client;
+
+	/* if this is a true probe, verify the chip ... */
+	if (kind < 0) {
+		status = isp1301_get_u16(isp, ISP1301_VENDOR_ID);
+		if (status != I2C_VENDOR_ID_PHILIPS) {
+			dev_dbg(&bus->dev, "addr %d not philips id: %d\n",
+				address, status);
+			goto fail1;
+		}
+		status = isp1301_get_u16(isp, ISP1301_PRODUCT_ID);
+		if (status != I2C_PRODUCT_ID_PHILIPS_1301) {
+			dev_dbg(&bus->dev, "%d not isp1301, %d\n",
+				address, status);
+			goto fail1;
+		}
+	}
+
+	status = i2c_attach_client(i2c);
+	if (status < 0) {
+		dev_dbg(&bus->dev, "can't attach %s to device %d, err %d\n",
+				DRIVER_NAME, address, status);
+fail1:
+		kfree(isp);
+		return 0;
+	}
+	isp->i2c_release = i2c->dev.release;
+	i2c->dev.release = isp1301_release;
+
+	/* initial development used chiprev 2.00 */
+	status = i2c_smbus_read_word_data(i2c, ISP1301_BCD_DEVICE);
+	dev_info(&i2c->dev, "chiprev %x.%02x, driver " DRIVER_VERSION "\n",
+		status >> 8, status & 0xff);
+
+	/* make like power-on reset */
+	isp1301_clear_bits(isp, ISP1301_MODE_CONTROL_1, MC1_MASK);
+
+	isp1301_set_bits(isp, ISP1301_MODE_CONTROL_2, MC2_BI_DI);
+	isp1301_clear_bits(isp, ISP1301_MODE_CONTROL_2, ~MC2_BI_DI);
+
+	isp1301_set_bits(isp, ISP1301_OTG_CONTROL_1,
+				OTG1_DM_PULLDOWN | OTG1_DP_PULLDOWN);
+	isp1301_clear_bits(isp, ISP1301_OTG_CONTROL_1,
+				~(OTG1_DM_PULLDOWN | OTG1_DP_PULLDOWN));
+
+	isp1301_clear_bits(isp, ISP1301_INTERRUPT_LATCH, ~0);
+	isp1301_clear_bits(isp, ISP1301_INTERRUPT_FALLING, ~0);
+	isp1301_clear_bits(isp, ISP1301_INTERRUPT_RISING, ~0);
+
+#ifdef	CONFIG_USB_OTG
+	status = otg_bind(isp);
+	if (status < 0) {
+		dev_dbg(&i2c->dev, "can't bind OTG\n");
+		goto fail2;
+	}
+#endif
+
+	if (machine_is_omap_h2()) {
+		/* full speed signaling by default */
+		isp1301_set_bits(isp, ISP1301_MODE_CONTROL_1,
+			MC1_SPEED_REG);
+		isp1301_set_bits(isp, ISP1301_MODE_CONTROL_2,
+			MC2_SPD_SUSP_CTRL);
+
+		/* IRQ wired at M14 */
+		omap_cfg_reg(M14_1510_GPIO2);
+		isp->irq = OMAP_GPIO_IRQ(2);
+		omap_request_gpio(2);
+		omap_set_gpio_direction(2, 1);
+		omap_set_gpio_edge_ctrl(2, OMAP_GPIO_FALLING_EDGE);
+	}
+
+	status = request_irq(isp->irq, isp1301_irq,
+			SA_SAMPLE_RANDOM, DRIVER_NAME, isp);
+	if (status < 0) {
+		dev_dbg(&i2c->dev, "can't get IRQ %d, err %d\n",
+				isp->irq, status);
+#ifdef	CONFIG_USB_OTG
+fail2:
+#endif
+		i2c_detach_client(i2c);
+		goto fail1;
+	}
+
+	isp->otg.dev = &isp->client.dev;
+	isp->otg.label = DRIVER_NAME;
+
+	isp->otg.set_host = isp1301_set_host,
+	isp->otg.set_peripheral = isp1301_set_peripheral,
+	isp->otg.set_power = isp1301_set_power,
+	isp->otg.start_srp = isp1301_start_srp,
+	isp->otg.start_hnp = isp1301_start_hnp,
+
+	enable_vbus_draw(isp, 0);
+	power_down(isp);
+	the_transceiver = isp;
+
+#ifdef	CONFIG_USB_OTG
+	update_otg1(isp, isp1301_get_u8(isp, ISP1301_INTERRUPT_SOURCE));
+	update_otg2(isp, isp1301_get_u8(isp, ISP1301_OTG_STATUS));
+#endif
+
+	dump_regs(isp, __FUNCTION__);
+
+#ifdef	VERBOSE
+	mod_timer(&isp->timer, jiffies + TIMER_JIFFIES);
+	dev_dbg(&i2c->dev, "scheduled timer, %d min\n", TIMER_MINUTES);
+#endif
+
+	status = otg_set_transceiver(&isp->otg);
+	if (status < 0)
+		dev_err(&i2c->dev, "can't register transceiver, %d\n",
+			status);
+
+	return 0;
+}
+
+static int isp1301_scan_bus(struct i2c_adapter *bus)
+{
+	if (!i2c_check_functionality(bus, I2C_FUNC_SMBUS_BYTE_DATA
+			| I2C_FUNC_SMBUS_READ_WORD_DATA))
+		return -EINVAL;
+	return i2c_probe(bus, &addr_data, isp1301_probe);
+}
+
+static struct i2c_driver isp1301_driver = {
+	.owner		= THIS_MODULE,
+	.name		= "isp1301_omap",
+	.id		= 1301,		/* FIXME "official", i2c-ids.h */
+	.class		= I2C_CLASS_HWMON,
+	.flags		= I2C_DF_NOTIFY,
+	.attach_adapter	= isp1301_scan_bus,
+	.detach_client	= isp1301_detach_client,
+};
+
+/*-------------------------------------------------------------------------*/
+
+static int __init isp_init(void)
+{
+	return i2c_add_driver(&isp1301_driver);
+}
+module_init(isp_init);
+
+static void __exit isp_exit(void)
+{
+	if (the_transceiver)
+		otg_set_transceiver(0);
+	i2c_del_driver(&isp1301_driver);
+}
+module_exit(isp_exit);
+
diff --git a/drivers/i2c/chips/it87.c b/drivers/i2c/chips/it87.c
new file mode 100644
index 00000000000..3d484a7aff1
--- /dev/null
+++ b/drivers/i2c/chips/it87.c
@@ -0,0 +1,1208 @@
+/*
+    it87.c - Part of lm_sensors, Linux kernel modules for hardware
+             monitoring.
+
+    Supports: IT8705F  Super I/O chip w/LPC interface & SMBus
+              IT8712F  Super I/O chip w/LPC interface & SMBus
+              Sis950   A clone of the IT8705F
+
+    Copyright (C) 2001 Chris Gauthron <chrisg@0-in.com> 
+    Largely inspired by lm78.c of the same package
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+/*
+    djg@pdp8.net David Gesswein 7/18/01
+    Modified to fix bug with not all alarms enabled.
+    Added ability to read battery voltage and select temperature sensor
+    type at module load time.
+*/
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/jiffies.h>
+#include <linux/i2c.h>
+#include <linux/i2c-sensor.h>
+#include <linux/i2c-vid.h>
+#include <asm/io.h>
+
+
+/* Addresses to scan */
+static unsigned short normal_i2c[] = { 0x28, 0x29, 0x2a, 0x2b, 0x2c, 0x2d,
+					0x2e, 0x2f, I2C_CLIENT_END };
+static unsigned int normal_isa[] = { 0x0290, I2C_CLIENT_ISA_END };
+
+/* Insmod parameters */
+SENSORS_INSMOD_2(it87, it8712);
+
+#define	REG	0x2e	/* The register to read/write */
+#define	DEV	0x07	/* Register: Logical device select */
+#define	VAL	0x2f	/* The value to read/write */
+#define PME	0x04	/* The device with the fan registers in it */
+#define	DEVID	0x20	/* Register: Device ID */
+#define	DEVREV	0x22	/* Register: Device Revision */
+
+static inline int
+superio_inb(int reg)
+{
+	outb(reg, REG);
+	return inb(VAL);
+}
+
+static int superio_inw(int reg)
+{
+	int val;
+	outb(reg++, REG);
+	val = inb(VAL) << 8;
+	outb(reg, REG);
+	val |= inb(VAL);
+	return val;
+}
+
+static inline void
+superio_select(void)
+{
+	outb(DEV, REG);
+	outb(PME, VAL);
+}
+
+static inline void
+superio_enter(void)
+{
+	outb(0x87, REG);
+	outb(0x01, REG);
+	outb(0x55, REG);
+	outb(0x55, REG);
+}
+
+static inline void
+superio_exit(void)
+{
+	outb(0x02, REG);
+	outb(0x02, VAL);
+}
+
+#define IT8712F_DEVID 0x8712
+#define IT8705F_DEVID 0x8705
+#define IT87_ACT_REG  0x30
+#define IT87_BASE_REG 0x60
+
+/* Update battery voltage after every reading if true */
+static int update_vbat;
+
+/* Not all BIOSes properly configure the PWM registers */
+static int fix_pwm_polarity;
+
+/* Chip Type */
+
+static u16 chip_type;
+
+/* Many IT87 constants specified below */
+
+/* Length of ISA address segment */
+#define IT87_EXTENT 8
+
+/* Where are the ISA address/data registers relative to the base address */
+#define IT87_ADDR_REG_OFFSET 5
+#define IT87_DATA_REG_OFFSET 6
+
+/*----- The IT87 registers -----*/
+
+#define IT87_REG_CONFIG        0x00
+
+#define IT87_REG_ALARM1        0x01
+#define IT87_REG_ALARM2        0x02
+#define IT87_REG_ALARM3        0x03
+
+#define IT87_REG_VID           0x0a
+#define IT87_REG_FAN_DIV       0x0b
+
+/* Monitors: 9 voltage (0 to 7, battery), 3 temp (1 to 3), 3 fan (1 to 3) */
+
+#define IT87_REG_FAN(nr)       (0x0d + (nr))
+#define IT87_REG_FAN_MIN(nr)   (0x10 + (nr))
+#define IT87_REG_FAN_MAIN_CTRL 0x13
+#define IT87_REG_FAN_CTL       0x14
+#define IT87_REG_PWM(nr)       (0x15 + (nr))
+
+#define IT87_REG_VIN(nr)       (0x20 + (nr))
+#define IT87_REG_TEMP(nr)      (0x29 + (nr))
+
+#define IT87_REG_VIN_MAX(nr)   (0x30 + (nr) * 2)
+#define IT87_REG_VIN_MIN(nr)   (0x31 + (nr) * 2)
+#define IT87_REG_TEMP_HIGH(nr) (0x40 + (nr) * 2)
+#define IT87_REG_TEMP_LOW(nr)  (0x41 + (nr) * 2)
+
+#define IT87_REG_I2C_ADDR      0x48
+
+#define IT87_REG_VIN_ENABLE    0x50
+#define IT87_REG_TEMP_ENABLE   0x51
+
+#define IT87_REG_CHIPID        0x58
+
+#define IN_TO_REG(val)  (SENSORS_LIMIT((((val) + 8)/16),0,255))
+#define IN_FROM_REG(val) ((val) * 16)
+
+static inline u8 FAN_TO_REG(long rpm, int div)
+{
+	if (rpm == 0)
+		return 255;
+	rpm = SENSORS_LIMIT(rpm, 1, 1000000);
+	return SENSORS_LIMIT((1350000 + rpm * div / 2) / (rpm * div), 1,
+			     254);
+}
+
+#define FAN_FROM_REG(val,div) ((val)==0?-1:(val)==255?0:1350000/((val)*(div)))
+
+#define TEMP_TO_REG(val) (SENSORS_LIMIT(((val)<0?(((val)-500)/1000):\
+					((val)+500)/1000),-128,127))
+#define TEMP_FROM_REG(val) (((val)>0x80?(val)-0x100:(val))*1000)
+
+#define ALARMS_FROM_REG(val) (val)
+
+#define PWM_TO_REG(val)   ((val) >> 1)
+#define PWM_FROM_REG(val) (((val)&0x7f) << 1)
+
+static int DIV_TO_REG(int val)
+{
+	int answer = 0;
+	while ((val >>= 1) != 0)
+		answer++;
+	return answer;
+}
+#define DIV_FROM_REG(val) (1 << (val))
+
+
+/* For each registered IT87, we need to keep some data in memory. That
+   data is pointed to by it87_list[NR]->data. The structure itself is
+   dynamically allocated, at the same time when a new it87 client is
+   allocated. */
+struct it87_data {
+	struct i2c_client client;
+	struct semaphore lock;
+	enum chips type;
+
+	struct semaphore update_lock;
+	char valid;		/* !=0 if following fields are valid */
+	unsigned long last_updated;	/* In jiffies */
+
+	u8 in[9];		/* Register value */
+	u8 in_max[9];		/* Register value */
+	u8 in_min[9];		/* Register value */
+	u8 fan[3];		/* Register value */
+	u8 fan_min[3];		/* Register value */
+	u8 temp[3];		/* Register value */
+	u8 temp_high[3];	/* Register value */
+	u8 temp_low[3];		/* Register value */
+	u8 sensor;		/* Register value */
+	u8 fan_div[3];		/* Register encoding, shifted right */
+	u8 vid;			/* Register encoding, combined */
+	int vrm;
+	u32 alarms;		/* Register encoding, combined */
+	u8 fan_main_ctrl;	/* Register value */
+	u8 manual_pwm_ctl[3];   /* manual PWM value set by user */
+};
+
+
+static int it87_attach_adapter(struct i2c_adapter *adapter);
+static int it87_find(int *address);
+static int it87_detect(struct i2c_adapter *adapter, int address, int kind);
+static int it87_detach_client(struct i2c_client *client);
+
+static int it87_read_value(struct i2c_client *client, u8 register);
+static int it87_write_value(struct i2c_client *client, u8 register,
+			u8 value);
+static struct it87_data *it87_update_device(struct device *dev);
+static int it87_check_pwm(struct i2c_client *client);
+static void it87_init_client(struct i2c_client *client, struct it87_data *data);
+
+
+static struct i2c_driver it87_driver = {
+	.owner		= THIS_MODULE,
+	.name		= "it87",
+	.id		= I2C_DRIVERID_IT87,
+	.flags		= I2C_DF_NOTIFY,
+	.attach_adapter	= it87_attach_adapter,
+	.detach_client	= it87_detach_client,
+};
+
+static ssize_t show_in(struct device *dev, char *buf, int nr)
+{
+	struct it87_data *data = it87_update_device(dev);
+	return sprintf(buf, "%d\n", IN_FROM_REG(data->in[nr]));
+}
+
+static ssize_t show_in_min(struct device *dev, char *buf, int nr)
+{
+	struct it87_data *data = it87_update_device(dev);
+	return sprintf(buf, "%d\n", IN_FROM_REG(data->in_min[nr]));
+}
+
+static ssize_t show_in_max(struct device *dev, char *buf, int nr)
+{
+	struct it87_data *data = it87_update_device(dev);
+	return sprintf(buf, "%d\n", IN_FROM_REG(data->in_max[nr]));
+}
+
+static ssize_t set_in_min(struct device *dev, const char *buf, 
+		size_t count, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct it87_data *data = i2c_get_clientdata(client);
+	unsigned long val = simple_strtoul(buf, NULL, 10);
+
+	down(&data->update_lock);
+	data->in_min[nr] = IN_TO_REG(val);
+	it87_write_value(client, IT87_REG_VIN_MIN(nr), 
+			data->in_min[nr]);
+	up(&data->update_lock);
+	return count;
+}
+static ssize_t set_in_max(struct device *dev, const char *buf, 
+		size_t count, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct it87_data *data = i2c_get_clientdata(client);
+	unsigned long val = simple_strtoul(buf, NULL, 10);
+
+	down(&data->update_lock);
+	data->in_max[nr] = IN_TO_REG(val);
+	it87_write_value(client, IT87_REG_VIN_MAX(nr), 
+			data->in_max[nr]);
+	up(&data->update_lock);
+	return count;
+}
+
+#define show_in_offset(offset)					\
+static ssize_t							\
+	show_in##offset (struct device *dev, char *buf)		\
+{								\
+	return show_in(dev, buf, offset);			\
+}								\
+static DEVICE_ATTR(in##offset##_input, S_IRUGO, show_in##offset, NULL);
+
+#define limit_in_offset(offset)					\
+static ssize_t							\
+	show_in##offset##_min (struct device *dev, char *buf)	\
+{								\
+	return show_in_min(dev, buf, offset);			\
+}								\
+static ssize_t							\
+	show_in##offset##_max (struct device *dev, char *buf)	\
+{								\
+	return show_in_max(dev, buf, offset);			\
+}								\
+static ssize_t set_in##offset##_min (struct device *dev, 	\
+		const char *buf, size_t count) 			\
+{								\
+	return set_in_min(dev, buf, count, offset);		\
+}								\
+static ssize_t set_in##offset##_max (struct device *dev,	\
+			const char *buf, size_t count)		\
+{								\
+	return set_in_max(dev, buf, count, offset);		\
+}								\
+static DEVICE_ATTR(in##offset##_min, S_IRUGO | S_IWUSR, 	\
+		show_in##offset##_min, set_in##offset##_min);	\
+static DEVICE_ATTR(in##offset##_max, S_IRUGO | S_IWUSR, 	\
+		show_in##offset##_max, set_in##offset##_max);
+
+show_in_offset(0);
+limit_in_offset(0);
+show_in_offset(1);
+limit_in_offset(1);
+show_in_offset(2);
+limit_in_offset(2);
+show_in_offset(3);
+limit_in_offset(3);
+show_in_offset(4);
+limit_in_offset(4);
+show_in_offset(5);
+limit_in_offset(5);
+show_in_offset(6);
+limit_in_offset(6);
+show_in_offset(7);
+limit_in_offset(7);
+show_in_offset(8);
+
+/* 3 temperatures */
+static ssize_t show_temp(struct device *dev, char *buf, int nr)
+{
+	struct it87_data *data = it87_update_device(dev);
+	return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp[nr]));
+}
+static ssize_t show_temp_max(struct device *dev, char *buf, int nr)
+{
+	struct it87_data *data = it87_update_device(dev);
+	return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_high[nr]));
+}
+static ssize_t show_temp_min(struct device *dev, char *buf, int nr)
+{
+	struct it87_data *data = it87_update_device(dev);
+	return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_low[nr]));
+}
+static ssize_t set_temp_max(struct device *dev, const char *buf, 
+		size_t count, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct it87_data *data = i2c_get_clientdata(client);
+	int val = simple_strtol(buf, NULL, 10);
+
+	down(&data->update_lock);
+	data->temp_high[nr] = TEMP_TO_REG(val);
+	it87_write_value(client, IT87_REG_TEMP_HIGH(nr), data->temp_high[nr]);
+	up(&data->update_lock);
+	return count;
+}
+static ssize_t set_temp_min(struct device *dev, const char *buf, 
+		size_t count, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct it87_data *data = i2c_get_clientdata(client);
+	int val = simple_strtol(buf, NULL, 10);
+
+	down(&data->update_lock);
+	data->temp_low[nr] = TEMP_TO_REG(val);
+	it87_write_value(client, IT87_REG_TEMP_LOW(nr), data->temp_low[nr]);
+	up(&data->update_lock);
+	return count;
+}
+#define show_temp_offset(offset)					\
+static ssize_t show_temp_##offset (struct device *dev, char *buf)	\
+{									\
+	return show_temp(dev, buf, offset - 1);				\
+}									\
+static ssize_t								\
+show_temp_##offset##_max (struct device *dev, char *buf)		\
+{									\
+	return show_temp_max(dev, buf, offset - 1);			\
+}									\
+static ssize_t								\
+show_temp_##offset##_min (struct device *dev, char *buf)		\
+{									\
+	return show_temp_min(dev, buf, offset - 1);			\
+}									\
+static ssize_t set_temp_##offset##_max (struct device *dev, 		\
+		const char *buf, size_t count) 				\
+{									\
+	return set_temp_max(dev, buf, count, offset - 1);		\
+}									\
+static ssize_t set_temp_##offset##_min (struct device *dev, 		\
+		const char *buf, size_t count) 				\
+{									\
+	return set_temp_min(dev, buf, count, offset - 1);		\
+}									\
+static DEVICE_ATTR(temp##offset##_input, S_IRUGO, show_temp_##offset, NULL); \
+static DEVICE_ATTR(temp##offset##_max, S_IRUGO | S_IWUSR, 		\
+		show_temp_##offset##_max, set_temp_##offset##_max); 	\
+static DEVICE_ATTR(temp##offset##_min, S_IRUGO | S_IWUSR, 		\
+		show_temp_##offset##_min, set_temp_##offset##_min);	
+
+show_temp_offset(1);
+show_temp_offset(2);
+show_temp_offset(3);
+
+static ssize_t show_sensor(struct device *dev, char *buf, int nr)
+{
+	struct it87_data *data = it87_update_device(dev);
+	u8 reg = data->sensor; /* In case the value is updated while we use it */
+	
+	if (reg & (1 << nr))
+		return sprintf(buf, "3\n");  /* thermal diode */
+	if (reg & (8 << nr))
+		return sprintf(buf, "2\n");  /* thermistor */
+	return sprintf(buf, "0\n");      /* disabled */
+}
+static ssize_t set_sensor(struct device *dev, const char *buf, 
+		size_t count, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct it87_data *data = i2c_get_clientdata(client);
+	int val = simple_strtol(buf, NULL, 10);
+
+	down(&data->update_lock);
+
+	data->sensor &= ~(1 << nr);
+	data->sensor &= ~(8 << nr);
+	/* 3 = thermal diode; 2 = thermistor; 0 = disabled */
+	if (val == 3)
+	    data->sensor |= 1 << nr;
+	else if (val == 2)
+	    data->sensor |= 8 << nr;
+	else if (val != 0) {
+		up(&data->update_lock);
+		return -EINVAL;
+	}
+	it87_write_value(client, IT87_REG_TEMP_ENABLE, data->sensor);
+	up(&data->update_lock);
+	return count;
+}
+#define show_sensor_offset(offset)					\
+static ssize_t show_sensor_##offset (struct device *dev, char *buf)	\
+{									\
+	return show_sensor(dev, buf, offset - 1);			\
+}									\
+static ssize_t set_sensor_##offset (struct device *dev, 		\
+		const char *buf, size_t count) 				\
+{									\
+	return set_sensor(dev, buf, count, offset - 1);			\
+}									\
+static DEVICE_ATTR(temp##offset##_type, S_IRUGO | S_IWUSR, 		\
+		show_sensor_##offset, set_sensor_##offset);
+
+show_sensor_offset(1);
+show_sensor_offset(2);
+show_sensor_offset(3);
+
+/* 3 Fans */
+static ssize_t show_fan(struct device *dev, char *buf, int nr)
+{
+	struct it87_data *data = it87_update_device(dev);
+	return sprintf(buf,"%d\n", FAN_FROM_REG(data->fan[nr], 
+				DIV_FROM_REG(data->fan_div[nr])));
+}
+static ssize_t show_fan_min(struct device *dev, char *buf, int nr)
+{
+	struct it87_data *data = it87_update_device(dev);
+	return sprintf(buf,"%d\n",
+		FAN_FROM_REG(data->fan_min[nr], DIV_FROM_REG(data->fan_div[nr])));
+}
+static ssize_t show_fan_div(struct device *dev, char *buf, int nr)
+{
+	struct it87_data *data = it87_update_device(dev);
+	return sprintf(buf, "%d\n", DIV_FROM_REG(data->fan_div[nr]));
+}
+static ssize_t show_pwm_enable(struct device *dev, char *buf, int nr)
+{
+	struct it87_data *data = it87_update_device(dev);
+	return sprintf(buf,"%d\n", (data->fan_main_ctrl & (1 << nr)) ? 1 : 0);
+}
+static ssize_t show_pwm(struct device *dev, char *buf, int nr)
+{
+	struct it87_data *data = it87_update_device(dev);
+	return sprintf(buf,"%d\n", data->manual_pwm_ctl[nr]);
+}
+static ssize_t set_fan_min(struct device *dev, const char *buf, 
+		size_t count, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct it87_data *data = i2c_get_clientdata(client);
+	int val = simple_strtol(buf, NULL, 10);
+
+	down(&data->update_lock);
+	data->fan_min[nr] = FAN_TO_REG(val, DIV_FROM_REG(data->fan_div[nr]));
+	it87_write_value(client, IT87_REG_FAN_MIN(nr), data->fan_min[nr]);
+	up(&data->update_lock);
+	return count;
+}
+static ssize_t set_fan_div(struct device *dev, const char *buf, 
+		size_t count, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct it87_data *data = i2c_get_clientdata(client);
+	int val = simple_strtol(buf, NULL, 10);
+	int i, min[3];
+	u8 old;
+
+	down(&data->update_lock);
+	old = it87_read_value(client, IT87_REG_FAN_DIV);
+
+	for (i = 0; i < 3; i++)
+		min[i] = FAN_FROM_REG(data->fan_min[i], DIV_FROM_REG(data->fan_div[i]));
+
+	switch (nr) {
+	case 0:
+	case 1:
+		data->fan_div[nr] = DIV_TO_REG(val);
+		break;
+	case 2:
+		if (val < 8)
+			data->fan_div[nr] = 1;
+		else
+			data->fan_div[nr] = 3;
+	}
+	val = old & 0x80;
+	val |= (data->fan_div[0] & 0x07);
+	val |= (data->fan_div[1] & 0x07) << 3;
+	if (data->fan_div[2] == 3)
+		val |= 0x1 << 6;
+	it87_write_value(client, IT87_REG_FAN_DIV, val);
+
+	for (i = 0; i < 3; i++) {
+		data->fan_min[i]=FAN_TO_REG(min[i], DIV_FROM_REG(data->fan_div[i]));
+		it87_write_value(client, IT87_REG_FAN_MIN(i), data->fan_min[i]);
+	}
+	up(&data->update_lock);
+	return count;
+}
+static ssize_t set_pwm_enable(struct device *dev, const char *buf,
+		size_t count, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct it87_data *data = i2c_get_clientdata(client);
+	int val = simple_strtol(buf, NULL, 10);
+
+	down(&data->update_lock);
+
+	if (val == 0) {
+		int tmp;
+		/* make sure the fan is on when in on/off mode */
+		tmp = it87_read_value(client, IT87_REG_FAN_CTL);
+		it87_write_value(client, IT87_REG_FAN_CTL, tmp | (1 << nr));
+		/* set on/off mode */
+		data->fan_main_ctrl &= ~(1 << nr);
+		it87_write_value(client, IT87_REG_FAN_MAIN_CTRL, data->fan_main_ctrl);
+	} else if (val == 1) {
+		/* set SmartGuardian mode */
+		data->fan_main_ctrl |= (1 << nr);
+		it87_write_value(client, IT87_REG_FAN_MAIN_CTRL, data->fan_main_ctrl);
+		/* set saved pwm value, clear FAN_CTLX PWM mode bit */
+		it87_write_value(client, IT87_REG_PWM(nr), PWM_TO_REG(data->manual_pwm_ctl[nr]));
+	} else {
+		up(&data->update_lock);
+		return -EINVAL;
+	}
+
+	up(&data->update_lock);
+	return count;
+}
+static ssize_t set_pwm(struct device *dev, const char *buf,
+		size_t count, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct it87_data *data = i2c_get_clientdata(client);
+	int val = simple_strtol(buf, NULL, 10);
+
+	if (val < 0 || val > 255)
+		return -EINVAL;
+
+	down(&data->update_lock);
+	data->manual_pwm_ctl[nr] = val;
+	if (data->fan_main_ctrl & (1 << nr))
+		it87_write_value(client, IT87_REG_PWM(nr), PWM_TO_REG(data->manual_pwm_ctl[nr]));
+	up(&data->update_lock);
+	return count;
+}
+
+#define show_fan_offset(offset)						\
+static ssize_t show_fan_##offset (struct device *dev, char *buf)	\
+{									\
+	return show_fan(dev, buf, offset - 1);				\
+}									\
+static ssize_t show_fan_##offset##_min (struct device *dev, char *buf)	\
+{									\
+	return show_fan_min(dev, buf, offset - 1);			\
+}									\
+static ssize_t show_fan_##offset##_div (struct device *dev, char *buf)	\
+{									\
+	return show_fan_div(dev, buf, offset - 1);			\
+}									\
+static ssize_t set_fan_##offset##_min (struct device *dev, 		\
+	const char *buf, size_t count) 					\
+{									\
+	return set_fan_min(dev, buf, count, offset - 1);		\
+}									\
+static ssize_t set_fan_##offset##_div (struct device *dev, 		\
+		const char *buf, size_t count) 				\
+{									\
+	return set_fan_div(dev, buf, count, offset - 1);		\
+}									\
+static DEVICE_ATTR(fan##offset##_input, S_IRUGO, show_fan_##offset, NULL); \
+static DEVICE_ATTR(fan##offset##_min, S_IRUGO | S_IWUSR, 		\
+		show_fan_##offset##_min, set_fan_##offset##_min); 	\
+static DEVICE_ATTR(fan##offset##_div, S_IRUGO | S_IWUSR, 		\
+		show_fan_##offset##_div, set_fan_##offset##_div);
+
+show_fan_offset(1);
+show_fan_offset(2);
+show_fan_offset(3);
+
+#define show_pwm_offset(offset)						\
+static ssize_t show_pwm##offset##_enable (struct device *dev,		\
+	char *buf)							\
+{									\
+	return show_pwm_enable(dev, buf, offset - 1);			\
+}									\
+static ssize_t show_pwm##offset (struct device *dev, char *buf)		\
+{									\
+	return show_pwm(dev, buf, offset - 1);				\
+}									\
+static ssize_t set_pwm##offset##_enable (struct device *dev,		\
+		const char *buf, size_t count)				\
+{									\
+	return set_pwm_enable(dev, buf, count, offset - 1);		\
+}									\
+static ssize_t set_pwm##offset (struct device *dev,			\
+		const char *buf, size_t count)				\
+{									\
+	return set_pwm(dev, buf, count, offset - 1);			\
+}									\
+static DEVICE_ATTR(pwm##offset##_enable, S_IRUGO | S_IWUSR,		\
+		show_pwm##offset##_enable,				\
+		set_pwm##offset##_enable);				\
+static DEVICE_ATTR(pwm##offset, S_IRUGO | S_IWUSR,			\
+		show_pwm##offset , set_pwm##offset );
+
+show_pwm_offset(1);
+show_pwm_offset(2);
+show_pwm_offset(3);
+
+/* Alarms */
+static ssize_t show_alarms(struct device *dev, char *buf)
+{
+	struct it87_data *data = it87_update_device(dev);
+	return sprintf(buf,"%d\n", ALARMS_FROM_REG(data->alarms));
+}
+static DEVICE_ATTR(alarms, S_IRUGO | S_IWUSR, show_alarms, NULL);
+
+static ssize_t
+show_vrm_reg(struct device *dev, char *buf)
+{
+	struct it87_data *data = it87_update_device(dev);
+	return sprintf(buf, "%ld\n", (long) data->vrm);
+}
+static ssize_t
+store_vrm_reg(struct device *dev, const char *buf, size_t count)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct it87_data *data = i2c_get_clientdata(client);
+	u32 val;
+
+	val = simple_strtoul(buf, NULL, 10);
+	data->vrm = val;
+
+	return count;
+}
+static DEVICE_ATTR(vrm, S_IRUGO | S_IWUSR, show_vrm_reg, store_vrm_reg);
+#define device_create_file_vrm(client) \
+device_create_file(&client->dev, &dev_attr_vrm)
+
+static ssize_t
+show_vid_reg(struct device *dev, char *buf)
+{
+	struct it87_data *data = it87_update_device(dev);
+	return sprintf(buf, "%ld\n", (long) vid_from_reg(data->vid, data->vrm));
+}
+static DEVICE_ATTR(cpu0_vid, S_IRUGO, show_vid_reg, NULL);
+#define device_create_file_vid(client) \
+device_create_file(&client->dev, &dev_attr_cpu0_vid)
+
+/* This function is called when:
+     * it87_driver is inserted (when this module is loaded), for each
+       available adapter
+     * when a new adapter is inserted (and it87_driver is still present) */
+static int it87_attach_adapter(struct i2c_adapter *adapter)
+{
+	if (!(adapter->class & I2C_CLASS_HWMON))
+		return 0;
+	return i2c_detect(adapter, &addr_data, it87_detect);
+}
+
+/* SuperIO detection - will change normal_isa[0] if a chip is found */
+static int it87_find(int *address)
+{
+	int err = -ENODEV;
+
+	superio_enter();
+	chip_type = superio_inw(DEVID);
+	if (chip_type != IT8712F_DEVID
+	 && chip_type != IT8705F_DEVID)
+	 	goto exit;
+
+	superio_select();
+	if (!(superio_inb(IT87_ACT_REG) & 0x01)) {
+		pr_info("it87: Device not activated, skipping\n");
+		goto exit;
+	}
+
+	*address = superio_inw(IT87_BASE_REG) & ~(IT87_EXTENT - 1);
+	if (*address == 0) {
+		pr_info("it87: Base address not set, skipping\n");
+		goto exit;
+	}
+
+	err = 0;
+	pr_info("it87: Found IT%04xF chip at 0x%x, revision %d\n",
+		chip_type, *address, superio_inb(DEVREV) & 0x0f);
+
+exit:
+	superio_exit();
+	return err;
+}
+
+/* This function is called by i2c_detect */
+int it87_detect(struct i2c_adapter *adapter, int address, int kind)
+{
+	int i;
+	struct i2c_client *new_client;
+	struct it87_data *data;
+	int err = 0;
+	const char *name = "";
+	int is_isa = i2c_is_isa_adapter(adapter);
+	int enable_pwm_interface;
+
+	if (!is_isa && 
+	    !i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
+		goto ERROR0;
+
+	/* Reserve the ISA region */
+	if (is_isa)
+		if (!request_region(address, IT87_EXTENT, it87_driver.name))
+			goto ERROR0;
+
+	/* Probe whether there is anything available on this address. Already
+	   done for SMBus and Super-I/O clients */
+	if (kind < 0) {
+		if (is_isa && !chip_type) {
+#define REALLY_SLOW_IO
+			/* We need the timeouts for at least some IT87-like chips. But only
+			   if we read 'undefined' registers. */
+			i = inb_p(address + 1);
+			if (inb_p(address + 2) != i
+			 || inb_p(address + 3) != i
+			 || inb_p(address + 7) != i) {
+		 		err = -ENODEV;
+				goto ERROR1;
+			}
+#undef REALLY_SLOW_IO
+
+			/* Let's just hope nothing breaks here */
+			i = inb_p(address + 5) & 0x7f;
+			outb_p(~i & 0x7f, address + 5);
+			if ((inb_p(address + 5) & 0x7f) != (~i & 0x7f)) {
+				outb_p(i, address + 5);
+				err = -ENODEV;
+				goto ERROR1;
+			}
+		}
+	}
+
+	/* OK. For now, we presume we have a valid client. We now create the
+	   client structure, even though we cannot fill it completely yet.
+	   But it allows us to access it87_{read,write}_value. */
+
+	if (!(data = kmalloc(sizeof(struct it87_data), GFP_KERNEL))) {
+		err = -ENOMEM;
+		goto ERROR1;
+	}
+	memset(data, 0, sizeof(struct it87_data));
+
+	new_client = &data->client;
+	if (is_isa)
+		init_MUTEX(&data->lock);
+	i2c_set_clientdata(new_client, data);
+	new_client->addr = address;
+	new_client->adapter = adapter;
+	new_client->driver = &it87_driver;
+	new_client->flags = 0;
+
+	/* Now, we do the remaining detection. */
+
+	if (kind < 0) {
+		if ((it87_read_value(new_client, IT87_REG_CONFIG) & 0x80)
+		  || (!is_isa
+		   && it87_read_value(new_client, IT87_REG_I2C_ADDR) != address)) {
+		   	err = -ENODEV;
+			goto ERROR2;
+		}
+	}
+
+	/* Determine the chip type. */
+	if (kind <= 0) {
+		i = it87_read_value(new_client, IT87_REG_CHIPID);
+		if (i == 0x90) {
+			kind = it87;
+			if ((is_isa) && (chip_type == IT8712F_DEVID))
+				kind = it8712;
+		}
+		else {
+			if (kind == 0)
+				dev_info(&adapter->dev, 
+					"Ignoring 'force' parameter for unknown chip at "
+					"adapter %d, address 0x%02x\n",
+					i2c_adapter_id(adapter), address);
+			err = -ENODEV;
+			goto ERROR2;
+		}
+	}
+
+	if (kind == it87) {
+		name = "it87";
+	} else if (kind == it8712) {
+		name = "it8712";
+	}
+
+	/* Fill in the remaining client fields and put it into the global list */
+	strlcpy(new_client->name, name, I2C_NAME_SIZE);
+	data->type = kind;
+	data->valid = 0;
+	init_MUTEX(&data->update_lock);
+
+	/* Tell the I2C layer a new client has arrived */
+	if ((err = i2c_attach_client(new_client)))
+		goto ERROR2;
+
+	/* Check PWM configuration */
+	enable_pwm_interface = it87_check_pwm(new_client);
+
+	/* Initialize the IT87 chip */
+	it87_init_client(new_client, data);
+
+	/* Register sysfs hooks */
+	device_create_file(&new_client->dev, &dev_attr_in0_input);
+	device_create_file(&new_client->dev, &dev_attr_in1_input);
+	device_create_file(&new_client->dev, &dev_attr_in2_input);
+	device_create_file(&new_client->dev, &dev_attr_in3_input);
+	device_create_file(&new_client->dev, &dev_attr_in4_input);
+	device_create_file(&new_client->dev, &dev_attr_in5_input);
+	device_create_file(&new_client->dev, &dev_attr_in6_input);
+	device_create_file(&new_client->dev, &dev_attr_in7_input);
+	device_create_file(&new_client->dev, &dev_attr_in8_input);
+	device_create_file(&new_client->dev, &dev_attr_in0_min);
+	device_create_file(&new_client->dev, &dev_attr_in1_min);
+	device_create_file(&new_client->dev, &dev_attr_in2_min);
+	device_create_file(&new_client->dev, &dev_attr_in3_min);
+	device_create_file(&new_client->dev, &dev_attr_in4_min);
+	device_create_file(&new_client->dev, &dev_attr_in5_min);
+	device_create_file(&new_client->dev, &dev_attr_in6_min);
+	device_create_file(&new_client->dev, &dev_attr_in7_min);
+	device_create_file(&new_client->dev, &dev_attr_in0_max);
+	device_create_file(&new_client->dev, &dev_attr_in1_max);
+	device_create_file(&new_client->dev, &dev_attr_in2_max);
+	device_create_file(&new_client->dev, &dev_attr_in3_max);
+	device_create_file(&new_client->dev, &dev_attr_in4_max);
+	device_create_file(&new_client->dev, &dev_attr_in5_max);
+	device_create_file(&new_client->dev, &dev_attr_in6_max);
+	device_create_file(&new_client->dev, &dev_attr_in7_max);
+	device_create_file(&new_client->dev, &dev_attr_temp1_input);
+	device_create_file(&new_client->dev, &dev_attr_temp2_input);
+	device_create_file(&new_client->dev, &dev_attr_temp3_input);
+	device_create_file(&new_client->dev, &dev_attr_temp1_max);
+	device_create_file(&new_client->dev, &dev_attr_temp2_max);
+	device_create_file(&new_client->dev, &dev_attr_temp3_max);
+	device_create_file(&new_client->dev, &dev_attr_temp1_min);
+	device_create_file(&new_client->dev, &dev_attr_temp2_min);
+	device_create_file(&new_client->dev, &dev_attr_temp3_min);
+	device_create_file(&new_client->dev, &dev_attr_temp1_type);
+	device_create_file(&new_client->dev, &dev_attr_temp2_type);
+	device_create_file(&new_client->dev, &dev_attr_temp3_type);
+	device_create_file(&new_client->dev, &dev_attr_fan1_input);
+	device_create_file(&new_client->dev, &dev_attr_fan2_input);
+	device_create_file(&new_client->dev, &dev_attr_fan3_input);
+	device_create_file(&new_client->dev, &dev_attr_fan1_min);
+	device_create_file(&new_client->dev, &dev_attr_fan2_min);
+	device_create_file(&new_client->dev, &dev_attr_fan3_min);
+	device_create_file(&new_client->dev, &dev_attr_fan1_div);
+	device_create_file(&new_client->dev, &dev_attr_fan2_div);
+	device_create_file(&new_client->dev, &dev_attr_fan3_div);
+	device_create_file(&new_client->dev, &dev_attr_alarms);
+	if (enable_pwm_interface) {
+		device_create_file(&new_client->dev, &dev_attr_pwm1_enable);
+		device_create_file(&new_client->dev, &dev_attr_pwm2_enable);
+		device_create_file(&new_client->dev, &dev_attr_pwm3_enable);
+		device_create_file(&new_client->dev, &dev_attr_pwm1);
+		device_create_file(&new_client->dev, &dev_attr_pwm2);
+		device_create_file(&new_client->dev, &dev_attr_pwm3);
+	}
+
+	if (data->type == it8712) {
+		data->vrm = i2c_which_vrm();
+		device_create_file_vrm(new_client);
+		device_create_file_vid(new_client);
+	}
+
+	return 0;
+
+ERROR2:
+	kfree(data);
+ERROR1:
+	if (is_isa)
+		release_region(address, IT87_EXTENT);
+ERROR0:
+	return err;
+}
+
+static int it87_detach_client(struct i2c_client *client)
+{
+	int err;
+
+	if ((err = i2c_detach_client(client))) {
+		dev_err(&client->dev,
+			"Client deregistration failed, client not detached.\n");
+		return err;
+	}
+
+	if(i2c_is_isa_client(client))
+		release_region(client->addr, IT87_EXTENT);
+	kfree(i2c_get_clientdata(client));
+
+	return 0;
+}
+
+/* The SMBus locks itself, but ISA access must be locked explicitely! 
+   We don't want to lock the whole ISA bus, so we lock each client
+   separately.
+   We ignore the IT87 BUSY flag at this moment - it could lead to deadlocks,
+   would slow down the IT87 access and should not be necessary. */
+static int it87_read_value(struct i2c_client *client, u8 reg)
+{
+	struct it87_data *data = i2c_get_clientdata(client);
+
+	int res;
+	if (i2c_is_isa_client(client)) {
+		down(&data->lock);
+		outb_p(reg, client->addr + IT87_ADDR_REG_OFFSET);
+		res = inb_p(client->addr + IT87_DATA_REG_OFFSET);
+		up(&data->lock);
+		return res;
+	} else
+		return i2c_smbus_read_byte_data(client, reg);
+}
+
+/* The SMBus locks itself, but ISA access muse be locked explicitely! 
+   We don't want to lock the whole ISA bus, so we lock each client
+   separately.
+   We ignore the IT87 BUSY flag at this moment - it could lead to deadlocks,
+   would slow down the IT87 access and should not be necessary. */
+static int it87_write_value(struct i2c_client *client, u8 reg, u8 value)
+{
+	struct it87_data *data = i2c_get_clientdata(client);
+
+	if (i2c_is_isa_client(client)) {
+		down(&data->lock);
+		outb_p(reg, client->addr + IT87_ADDR_REG_OFFSET);
+		outb_p(value, client->addr + IT87_DATA_REG_OFFSET);
+		up(&data->lock);
+		return 0;
+	} else
+		return i2c_smbus_write_byte_data(client, reg, value);
+}
+
+/* Return 1 if and only if the PWM interface is safe to use */
+static int it87_check_pwm(struct i2c_client *client)
+{
+	/* Some BIOSes fail to correctly configure the IT87 fans. All fans off
+	 * and polarity set to active low is sign that this is the case so we
+	 * disable pwm control to protect the user. */
+	int tmp = it87_read_value(client, IT87_REG_FAN_CTL);
+	if ((tmp & 0x87) == 0) {
+		if (fix_pwm_polarity) {
+			/* The user asks us to attempt a chip reconfiguration.
+			 * This means switching to active high polarity and
+			 * inverting all fan speed values. */
+			int i;
+			u8 pwm[3];
+
+			for (i = 0; i < 3; i++)
+				pwm[i] = it87_read_value(client,
+							 IT87_REG_PWM(i));
+
+			/* If any fan is in automatic pwm mode, the polarity
+			 * might be correct, as suspicious as it seems, so we
+			 * better don't change anything (but still disable the
+			 * PWM interface). */
+			if (!((pwm[0] | pwm[1] | pwm[2]) & 0x80)) {
+				dev_info(&client->dev, "Reconfiguring PWM to "
+					 "active high polarity\n");
+				it87_write_value(client, IT87_REG_FAN_CTL,
+						 tmp | 0x87);
+				for (i = 0; i < 3; i++)
+					it87_write_value(client,
+							 IT87_REG_PWM(i),
+							 0x7f & ~pwm[i]);
+				return 1;
+			}
+
+			dev_info(&client->dev, "PWM configuration is "
+				 "too broken to be fixed\n");
+		}
+
+		dev_info(&client->dev, "Detected broken BIOS "
+			 "defaults, disabling PWM interface\n");
+		return 0;
+	} else if (fix_pwm_polarity) {
+		dev_info(&client->dev, "PWM configuration looks "
+			 "sane, won't touch\n");
+	}
+
+	return 1;
+}
+
+/* Called when we have found a new IT87. */
+static void it87_init_client(struct i2c_client *client, struct it87_data *data)
+{
+	int tmp, i;
+
+	/* initialize to sane defaults:
+	 * - if the chip is in manual pwm mode, this will be overwritten with
+	 *   the actual settings on the chip (so in this case, initialization
+	 *   is not needed)
+	 * - if in automatic or on/off mode, we could switch to manual mode,
+	 *   read the registers and set manual_pwm_ctl accordingly, but currently
+	 *   this is not implemented, so we initialize to something sane */
+	for (i = 0; i < 3; i++) {
+		data->manual_pwm_ctl[i] = 0xff;
+	}
+
+	/* Check if temperature channnels are reset manually or by some reason */
+	tmp = it87_read_value(client, IT87_REG_TEMP_ENABLE);
+	if ((tmp & 0x3f) == 0) {
+		/* Temp1,Temp3=thermistor; Temp2=thermal diode */
+		tmp = (tmp & 0xc0) | 0x2a;
+		it87_write_value(client, IT87_REG_TEMP_ENABLE, tmp);
+	}
+	data->sensor = tmp;
+
+	/* Check if voltage monitors are reset manually or by some reason */
+	tmp = it87_read_value(client, IT87_REG_VIN_ENABLE);
+	if ((tmp & 0xff) == 0) {
+		/* Enable all voltage monitors */
+		it87_write_value(client, IT87_REG_VIN_ENABLE, 0xff);
+	}
+
+	/* Check if tachometers are reset manually or by some reason */
+	data->fan_main_ctrl = it87_read_value(client, IT87_REG_FAN_MAIN_CTRL);
+	if ((data->fan_main_ctrl & 0x70) == 0) {
+		/* Enable all fan tachometers */
+		data->fan_main_ctrl |= 0x70;
+		it87_write_value(client, IT87_REG_FAN_MAIN_CTRL, data->fan_main_ctrl);
+	}
+
+	/* Set current fan mode registers and the default settings for the
+	 * other mode registers */
+	for (i = 0; i < 3; i++) {
+		if (data->fan_main_ctrl & (1 << i)) {
+			/* pwm mode */
+			tmp = it87_read_value(client, IT87_REG_PWM(i));
+			if (tmp & 0x80) {
+				/* automatic pwm - not yet implemented, but
+				 * leave the settings made by the BIOS alone
+				 * until a change is requested via the sysfs
+				 * interface */
+			} else {
+				/* manual pwm */
+				data->manual_pwm_ctl[i] = PWM_FROM_REG(tmp);
+			}
+		}
+ 	}
+
+	/* Start monitoring */
+	it87_write_value(client, IT87_REG_CONFIG,
+			 (it87_read_value(client, IT87_REG_CONFIG) & 0x36)
+			 | (update_vbat ? 0x41 : 0x01));
+}
+
+static struct it87_data *it87_update_device(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct it87_data *data = i2c_get_clientdata(client);
+	int i;
+
+	down(&data->update_lock);
+
+	if (time_after(jiffies, data->last_updated + HZ + HZ / 2)
+	    || !data->valid) {
+
+		if (update_vbat) {
+			/* Cleared after each update, so reenable.  Value
+		 	  returned by this read will be previous value */	
+			it87_write_value(client, IT87_REG_CONFIG,
+			   it87_read_value(client, IT87_REG_CONFIG) | 0x40);
+		}
+		for (i = 0; i <= 7; i++) {
+			data->in[i] =
+			    it87_read_value(client, IT87_REG_VIN(i));
+			data->in_min[i] =
+			    it87_read_value(client, IT87_REG_VIN_MIN(i));
+			data->in_max[i] =
+			    it87_read_value(client, IT87_REG_VIN_MAX(i));
+		}
+		data->in[8] =
+		    it87_read_value(client, IT87_REG_VIN(8));
+		/* Temperature sensor doesn't have limit registers, set
+		   to min and max value */
+		data->in_min[8] = 0;
+		data->in_max[8] = 255;
+
+		for (i = 0; i < 3; i++) {
+			data->fan[i] =
+			    it87_read_value(client, IT87_REG_FAN(i));
+			data->fan_min[i] =
+			    it87_read_value(client, IT87_REG_FAN_MIN(i));
+		}
+		for (i = 0; i < 3; i++) {
+			data->temp[i] =
+			    it87_read_value(client, IT87_REG_TEMP(i));
+			data->temp_high[i] =
+			    it87_read_value(client, IT87_REG_TEMP_HIGH(i));
+			data->temp_low[i] =
+			    it87_read_value(client, IT87_REG_TEMP_LOW(i));
+		}
+
+		i = it87_read_value(client, IT87_REG_FAN_DIV);
+		data->fan_div[0] = i & 0x07;
+		data->fan_div[1] = (i >> 3) & 0x07;
+		data->fan_div[2] = (i & 0x40) ? 3 : 1;
+
+		data->alarms =
+			it87_read_value(client, IT87_REG_ALARM1) |
+			(it87_read_value(client, IT87_REG_ALARM2) << 8) |
+			(it87_read_value(client, IT87_REG_ALARM3) << 16);
+		data->fan_main_ctrl = it87_read_value(client, IT87_REG_FAN_MAIN_CTRL);
+
+		data->sensor = it87_read_value(client, IT87_REG_TEMP_ENABLE);
+		/* The 8705 does not have VID capability */
+		if (data->type == it8712) {
+			data->vid = it87_read_value(client, IT87_REG_VID);
+			data->vid &= 0x1f;
+		}
+		data->last_updated = jiffies;
+		data->valid = 1;
+	}
+
+	up(&data->update_lock);
+
+	return data;
+}
+
+static int __init sm_it87_init(void)
+{
+	int addr;
+
+	if (!it87_find(&addr)) {
+		normal_isa[0] = addr;
+	}
+	return i2c_add_driver(&it87_driver);
+}
+
+static void __exit sm_it87_exit(void)
+{
+	i2c_del_driver(&it87_driver);
+}
+
+
+MODULE_AUTHOR("Chris Gauthron <chrisg@0-in.com>");
+MODULE_DESCRIPTION("IT8705F, IT8712F, Sis950 driver");
+module_param(update_vbat, bool, 0);
+MODULE_PARM_DESC(update_vbat, "Update vbat if set else return powerup value");
+module_param(fix_pwm_polarity, bool, 0);
+MODULE_PARM_DESC(fix_pwm_polarity, "Force PWM polarity to active high (DANGEROUS)");
+MODULE_LICENSE("GPL");
+
+module_init(sm_it87_init);
+module_exit(sm_it87_exit);
diff --git a/drivers/i2c/chips/lm63.c b/drivers/i2c/chips/lm63.c
new file mode 100644
index 00000000000..14cc5af0373
--- /dev/null
+++ b/drivers/i2c/chips/lm63.c
@@ -0,0 +1,581 @@
+/*
+ * lm63.c - driver for the National Semiconductor LM63 temperature sensor
+ *          with integrated fan control
+ * Copyright (C) 2004  Jean Delvare <khali@linux-fr.org>
+ * Based on the lm90 driver.
+ *
+ * The LM63 is a sensor chip made by National Semiconductor. It measures
+ * two temperatures (its own and one external one) and the speed of one
+ * fan, those speed it can additionally control. Complete datasheet can be
+ * obtained from National's website at:
+ *   http://www.national.com/pf/LM/LM63.html
+ *
+ * The LM63 is basically an LM86 with fan speed monitoring and control
+ * capabilities added. It misses some of the LM86 features though:
+ *  - No low limit for local temperature.
+ *  - No critical limit for local temperature.
+ *  - Critical limit for remote temperature can be changed only once. We
+ *    will consider that the critical limit is read-only.
+ *
+ * The datasheet isn't very clear about what the tachometer reading is.
+ * I had a explanation from National Semiconductor though. The two lower
+ * bits of the read value have to be masked out. The value is still 16 bit
+ * in width.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/jiffies.h>
+#include <linux/i2c.h>
+#include <linux/i2c-sensor.h>
+
+/*
+ * Addresses to scan
+ * Address is fully defined internally and cannot be changed.
+ */
+
+static unsigned short normal_i2c[] = { 0x4c, I2C_CLIENT_END };
+static unsigned int normal_isa[] = { I2C_CLIENT_ISA_END };
+
+/*
+ * Insmod parameters
+ */
+
+SENSORS_INSMOD_1(lm63);
+
+/*
+ * The LM63 registers
+ */
+
+#define LM63_REG_CONFIG1		0x03
+#define LM63_REG_CONFIG2		0xBF
+#define LM63_REG_CONFIG_FAN		0x4A
+
+#define LM63_REG_TACH_COUNT_MSB		0x47
+#define LM63_REG_TACH_COUNT_LSB		0x46
+#define LM63_REG_TACH_LIMIT_MSB		0x49
+#define LM63_REG_TACH_LIMIT_LSB		0x48
+
+#define LM63_REG_PWM_VALUE		0x4C
+#define LM63_REG_PWM_FREQ		0x4D
+
+#define LM63_REG_LOCAL_TEMP		0x00
+#define LM63_REG_LOCAL_HIGH		0x05
+
+#define LM63_REG_REMOTE_TEMP_MSB	0x01
+#define LM63_REG_REMOTE_TEMP_LSB	0x10
+#define LM63_REG_REMOTE_OFFSET_MSB	0x11
+#define LM63_REG_REMOTE_OFFSET_LSB	0x12
+#define LM63_REG_REMOTE_HIGH_MSB	0x07
+#define LM63_REG_REMOTE_HIGH_LSB	0x13
+#define LM63_REG_REMOTE_LOW_MSB		0x08
+#define LM63_REG_REMOTE_LOW_LSB		0x14
+#define LM63_REG_REMOTE_TCRIT		0x19
+#define LM63_REG_REMOTE_TCRIT_HYST	0x21
+
+#define LM63_REG_ALERT_STATUS		0x02
+#define LM63_REG_ALERT_MASK		0x16
+
+#define LM63_REG_MAN_ID			0xFE
+#define LM63_REG_CHIP_ID		0xFF
+
+/*
+ * Conversions and various macros
+ * For tachometer counts, the LM63 uses 16-bit values.
+ * For local temperature and high limit, remote critical limit and hysteresis
+ * value, it uses signed 8-bit values with LSB = 1 degree Celcius.
+ * For remote temperature, low and high limits, it uses signed 11-bit values
+ * with LSB = 0.125 degree Celcius, left-justified in 16-bit registers.
+ */
+
+#define FAN_FROM_REG(reg)	((reg) == 0xFFFC || (reg) == 0 ? 0 : \
+				 5400000 / (reg))
+#define FAN_TO_REG(val)		((val) <= 82 ? 0xFFFC : \
+				 (5400000 / (val)) & 0xFFFC)
+#define TEMP8_FROM_REG(reg)	((reg) * 1000)
+#define TEMP8_TO_REG(val)	((val) <= -128000 ? -128 : \
+				 (val) >= 127000 ? 127 : \
+				 (val) < 0 ? ((val) - 500) / 1000 : \
+				 ((val) + 500) / 1000)
+#define TEMP11_FROM_REG(reg)	((reg) / 32 * 125)
+#define TEMP11_TO_REG(val)	((val) <= -128000 ? 0x8000 : \
+				 (val) >= 127875 ? 0x7FE0 : \
+				 (val) < 0 ? ((val) - 62) / 125 * 32 : \
+				 ((val) + 62) / 125 * 32)
+#define HYST_TO_REG(val)	((val) <= 0 ? 0 : \
+				 (val) >= 127000 ? 127 : \
+				 ((val) + 500) / 1000)
+
+/*
+ * Functions declaration
+ */
+
+static int lm63_attach_adapter(struct i2c_adapter *adapter);
+static int lm63_detach_client(struct i2c_client *client);
+
+static struct lm63_data *lm63_update_device(struct device *dev);
+
+static int lm63_detect(struct i2c_adapter *adapter, int address, int kind);
+static void lm63_init_client(struct i2c_client *client);
+
+/*
+ * Driver data (common to all clients)
+ */
+
+static struct i2c_driver lm63_driver = {
+	.owner		= THIS_MODULE,
+	.name		= "lm63",
+	.flags		= I2C_DF_NOTIFY,
+	.attach_adapter	= lm63_attach_adapter,
+	.detach_client	= lm63_detach_client,
+};
+
+/*
+ * Client data (each client gets its own)
+ */
+
+struct lm63_data {
+	struct i2c_client client;
+	struct semaphore update_lock;
+	char valid; /* zero until following fields are valid */
+	unsigned long last_updated; /* in jiffies */
+
+	/* registers values */
+	u8 config, config_fan;
+	u16 fan1_input;
+	u16 fan1_low;
+	u8 pwm1_freq;
+	u8 pwm1_value;
+	s8 temp1_input;
+	s8 temp1_high;
+	s16 temp2_input;
+	s16 temp2_high;
+	s16 temp2_low;
+	s8 temp2_crit;
+	u8 temp2_crit_hyst;
+	u8 alarms;
+};
+
+/*
+ * Sysfs callback functions and files
+ */
+
+#define show_fan(value) \
+static ssize_t show_##value(struct device *dev, char *buf) \
+{ \
+	struct lm63_data *data = lm63_update_device(dev); \
+	return sprintf(buf, "%d\n", FAN_FROM_REG(data->value)); \
+}
+show_fan(fan1_input);
+show_fan(fan1_low);
+
+static ssize_t set_fan1_low(struct device *dev, const char *buf,
+	size_t count)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct lm63_data *data = i2c_get_clientdata(client);
+	unsigned long val = simple_strtoul(buf, NULL, 10);
+
+	down(&data->update_lock);
+	data->fan1_low = FAN_TO_REG(val);
+	i2c_smbus_write_byte_data(client, LM63_REG_TACH_LIMIT_LSB,
+				  data->fan1_low & 0xFF);
+	i2c_smbus_write_byte_data(client, LM63_REG_TACH_LIMIT_MSB,
+				  data->fan1_low >> 8);
+	up(&data->update_lock);
+	return count;
+}
+
+static ssize_t show_pwm1(struct device *dev, char *buf)
+{
+	struct lm63_data *data = lm63_update_device(dev);
+	return sprintf(buf, "%d\n", data->pwm1_value >= 2 * data->pwm1_freq ?
+		       255 : (data->pwm1_value * 255 + data->pwm1_freq) /
+		       (2 * data->pwm1_freq));
+}
+
+static ssize_t set_pwm1(struct device *dev, const char *buf, size_t count)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct lm63_data *data = i2c_get_clientdata(client);
+	unsigned long val;
+	
+	if (!(data->config_fan & 0x20)) /* register is read-only */
+		return -EPERM;
+
+	val = simple_strtoul(buf, NULL, 10);
+	down(&data->update_lock);
+	data->pwm1_value = val <= 0 ? 0 :
+			   val >= 255 ? 2 * data->pwm1_freq :
+			   (val * data->pwm1_freq * 2 + 127) / 255;
+	i2c_smbus_write_byte_data(client, LM63_REG_PWM_VALUE, data->pwm1_value);
+	up(&data->update_lock);
+	return count;
+}
+
+static ssize_t show_pwm1_enable(struct device *dev, char *buf)
+{
+	struct lm63_data *data = lm63_update_device(dev);
+	return sprintf(buf, "%d\n", data->config_fan & 0x20 ? 1 : 2);
+}
+
+#define show_temp8(value) \
+static ssize_t show_##value(struct device *dev, char *buf) \
+{ \
+	struct lm63_data *data = lm63_update_device(dev); \
+	return sprintf(buf, "%d\n", TEMP8_FROM_REG(data->value)); \
+}
+#define show_temp11(value) \
+static ssize_t show_##value(struct device *dev, char *buf) \
+{ \
+	struct lm63_data *data = lm63_update_device(dev); \
+	return sprintf(buf, "%d\n", TEMP11_FROM_REG(data->value)); \
+}
+show_temp8(temp1_input);
+show_temp8(temp1_high);
+show_temp11(temp2_input);
+show_temp11(temp2_high);
+show_temp11(temp2_low);
+show_temp8(temp2_crit);
+
+#define set_temp8(value, reg) \
+static ssize_t set_##value(struct device *dev, const char *buf, \
+	size_t count) \
+{ \
+	struct i2c_client *client = to_i2c_client(dev); \
+	struct lm63_data *data = i2c_get_clientdata(client); \
+	long val = simple_strtol(buf, NULL, 10); \
+ \
+	down(&data->update_lock); \
+	data->value = TEMP8_TO_REG(val); \
+	i2c_smbus_write_byte_data(client, reg, data->value); \
+	up(&data->update_lock); \
+	return count; \
+}
+#define set_temp11(value, reg_msb, reg_lsb) \
+static ssize_t set_##value(struct device *dev, const char *buf, \
+	size_t count) \
+{ \
+	struct i2c_client *client = to_i2c_client(dev); \
+	struct lm63_data *data = i2c_get_clientdata(client); \
+	long val = simple_strtol(buf, NULL, 10); \
+ \
+	down(&data->update_lock); \
+	data->value = TEMP11_TO_REG(val); \
+	i2c_smbus_write_byte_data(client, reg_msb, data->value >> 8); \
+	i2c_smbus_write_byte_data(client, reg_lsb, data->value & 0xff); \
+	up(&data->update_lock); \
+	return count; \
+}
+set_temp8(temp1_high, LM63_REG_LOCAL_HIGH);
+set_temp11(temp2_high, LM63_REG_REMOTE_HIGH_MSB, LM63_REG_REMOTE_HIGH_LSB);
+set_temp11(temp2_low, LM63_REG_REMOTE_LOW_MSB, LM63_REG_REMOTE_LOW_LSB);
+
+/* Hysteresis register holds a relative value, while we want to present
+   an absolute to user-space */
+static ssize_t show_temp2_crit_hyst(struct device *dev, char *buf)
+{
+	struct lm63_data *data = lm63_update_device(dev);
+	return sprintf(buf, "%d\n", TEMP8_FROM_REG(data->temp2_crit)
+		       - TEMP8_FROM_REG(data->temp2_crit_hyst));
+}
+
+/* And now the other way around, user-space provides an absolute
+   hysteresis value and we have to store a relative one */
+static ssize_t set_temp2_crit_hyst(struct device *dev, const char *buf,
+	size_t count)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct lm63_data *data = i2c_get_clientdata(client);
+	long val = simple_strtol(buf, NULL, 10);
+	long hyst;
+
+	down(&data->update_lock);
+	hyst = TEMP8_FROM_REG(data->temp2_crit) - val;
+	i2c_smbus_write_byte_data(client, LM63_REG_REMOTE_TCRIT_HYST,
+				  HYST_TO_REG(hyst));
+	up(&data->update_lock);
+	return count;
+}
+
+static ssize_t show_alarms(struct device *dev, char *buf)
+{
+	struct lm63_data *data = lm63_update_device(dev);
+	return sprintf(buf, "%u\n", data->alarms);
+}
+
+static DEVICE_ATTR(fan1_input, S_IRUGO, show_fan1_input, NULL);
+static DEVICE_ATTR(fan1_min, S_IWUSR | S_IRUGO, show_fan1_low,
+	set_fan1_low);
+
+static DEVICE_ATTR(pwm1, S_IWUSR | S_IRUGO, show_pwm1, set_pwm1);
+static DEVICE_ATTR(pwm1_enable, S_IRUGO, show_pwm1_enable, NULL);
+
+static DEVICE_ATTR(temp1_input, S_IRUGO, show_temp1_input, NULL);
+static DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO, show_temp1_high,
+	set_temp1_high);
+
+static DEVICE_ATTR(temp2_input, S_IRUGO, show_temp2_input, NULL);
+static DEVICE_ATTR(temp2_min, S_IWUSR | S_IRUGO, show_temp2_low,
+	set_temp2_low);
+static DEVICE_ATTR(temp2_max, S_IWUSR | S_IRUGO, show_temp2_high,
+	set_temp2_high);
+static DEVICE_ATTR(temp2_crit, S_IRUGO, show_temp2_crit, NULL);
+static DEVICE_ATTR(temp2_crit_hyst, S_IWUSR | S_IRUGO, show_temp2_crit_hyst,
+	set_temp2_crit_hyst);
+
+static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL);
+
+/*
+ * Real code
+ */
+
+static int lm63_attach_adapter(struct i2c_adapter *adapter)
+{
+	if (!(adapter->class & I2C_CLASS_HWMON))
+		return 0;
+	return i2c_detect(adapter, &addr_data, lm63_detect);
+}
+
+/*
+ * The following function does more than just detection. If detection
+ * succeeds, it also registers the new chip.
+ */
+static int lm63_detect(struct i2c_adapter *adapter, int address, int kind)
+{
+	struct i2c_client *new_client;
+	struct lm63_data *data;
+	int err = 0;
+
+	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
+		goto exit;
+
+	if (!(data = kmalloc(sizeof(struct lm63_data), GFP_KERNEL))) {
+		err = -ENOMEM;
+		goto exit;
+	}
+	memset(data, 0, sizeof(struct lm63_data));
+
+	/* The common I2C client data is placed right before the
+	   LM63-specific data. */
+	new_client = &data->client;
+	i2c_set_clientdata(new_client, data);
+	new_client->addr = address;
+	new_client->adapter = adapter;
+	new_client->driver = &lm63_driver;
+	new_client->flags = 0;
+
+	/* Default to an LM63 if forced */
+	if (kind == 0)
+		kind = lm63;
+
+	if (kind < 0) { /* must identify */
+		u8 man_id, chip_id, reg_config1, reg_config2;
+		u8 reg_alert_status, reg_alert_mask;
+
+		man_id = i2c_smbus_read_byte_data(new_client,
+			 LM63_REG_MAN_ID);
+		chip_id = i2c_smbus_read_byte_data(new_client,
+			  LM63_REG_CHIP_ID);
+		reg_config1 = i2c_smbus_read_byte_data(new_client,
+			      LM63_REG_CONFIG1);
+		reg_config2 = i2c_smbus_read_byte_data(new_client,
+			      LM63_REG_CONFIG2);
+		reg_alert_status = i2c_smbus_read_byte_data(new_client,
+				   LM63_REG_ALERT_STATUS);
+		reg_alert_mask = i2c_smbus_read_byte_data(new_client,
+				 LM63_REG_ALERT_MASK);
+
+		if (man_id == 0x01 /* National Semiconductor */
+		 && chip_id == 0x41 /* LM63 */
+		 && (reg_config1 & 0x18) == 0x00
+		 && (reg_config2 & 0xF8) == 0x00
+		 && (reg_alert_status & 0x20) == 0x00
+		 && (reg_alert_mask & 0xA4) == 0xA4) {
+			kind = lm63;
+		} else { /* failed */
+			dev_dbg(&adapter->dev, "Unsupported chip "
+				"(man_id=0x%02X, chip_id=0x%02X).\n",
+				man_id, chip_id);
+			goto exit_free;
+		}
+	}
+
+	strlcpy(new_client->name, "lm63", I2C_NAME_SIZE);
+	data->valid = 0;
+	init_MUTEX(&data->update_lock);
+
+	/* Tell the I2C layer a new client has arrived */
+	if ((err = i2c_attach_client(new_client)))
+		goto exit_free;
+
+	/* Initialize the LM63 chip */
+	lm63_init_client(new_client);
+
+	/* Register sysfs hooks */
+	if (data->config & 0x04) { /* tachometer enabled */
+		device_create_file(&new_client->dev, &dev_attr_fan1_input);
+		device_create_file(&new_client->dev, &dev_attr_fan1_min);
+	}
+	device_create_file(&new_client->dev, &dev_attr_pwm1);
+	device_create_file(&new_client->dev, &dev_attr_pwm1_enable);
+	device_create_file(&new_client->dev, &dev_attr_temp1_input);
+	device_create_file(&new_client->dev, &dev_attr_temp2_input);
+	device_create_file(&new_client->dev, &dev_attr_temp2_min);
+	device_create_file(&new_client->dev, &dev_attr_temp1_max);
+	device_create_file(&new_client->dev, &dev_attr_temp2_max);
+	device_create_file(&new_client->dev, &dev_attr_temp2_crit);
+	device_create_file(&new_client->dev, &dev_attr_temp2_crit_hyst);
+	device_create_file(&new_client->dev, &dev_attr_alarms);
+
+	return 0;
+
+exit_free:
+	kfree(data);
+exit:
+	return err;
+}
+
+/* Idealy we shouldn't have to initialize anything, since the BIOS
+   should have taken care of everything */
+static void lm63_init_client(struct i2c_client *client)
+{
+	struct lm63_data *data = i2c_get_clientdata(client);
+
+	data->config = i2c_smbus_read_byte_data(client, LM63_REG_CONFIG1);
+	data->config_fan = i2c_smbus_read_byte_data(client,
+						    LM63_REG_CONFIG_FAN);
+
+	/* Start converting if needed */
+	if (data->config & 0x40) { /* standby */
+		dev_dbg(&client->dev, "Switching to operational mode");
+		data->config &= 0xA7;
+		i2c_smbus_write_byte_data(client, LM63_REG_CONFIG1,
+					  data->config);
+	}
+
+	/* We may need pwm1_freq before ever updating the client data */
+	data->pwm1_freq = i2c_smbus_read_byte_data(client, LM63_REG_PWM_FREQ);
+	if (data->pwm1_freq == 0)
+		data->pwm1_freq = 1;
+
+	/* Show some debug info about the LM63 configuration */
+	dev_dbg(&client->dev, "Alert/tach pin configured for %s\n",
+		(data->config & 0x04) ? "tachometer input" :
+		"alert output");
+	dev_dbg(&client->dev, "PWM clock %s kHz, output frequency %u Hz\n",
+		(data->config_fan & 0x08) ? "1.4" : "360",
+		((data->config_fan & 0x08) ? 700 : 180000) / data->pwm1_freq);
+	dev_dbg(&client->dev, "PWM output active %s, %s mode\n",
+		(data->config_fan & 0x10) ? "low" : "high",
+		(data->config_fan & 0x20) ? "manual" : "auto");
+}
+
+static int lm63_detach_client(struct i2c_client *client)
+{
+	int err;
+
+	if ((err = i2c_detach_client(client))) {
+		dev_err(&client->dev, "Client deregistration failed, "
+			"client not detached\n");
+		return err;
+	}
+
+	kfree(i2c_get_clientdata(client));
+	return 0;
+}
+
+static struct lm63_data *lm63_update_device(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct lm63_data *data = i2c_get_clientdata(client);
+
+	down(&data->update_lock);
+
+	if (time_after(jiffies, data->last_updated + HZ) || !data->valid) {
+		if (data->config & 0x04) { /* tachometer enabled  */
+			/* order matters for fan1_input */
+			data->fan1_input = i2c_smbus_read_byte_data(client,
+					   LM63_REG_TACH_COUNT_LSB) & 0xFC;
+			data->fan1_input |= i2c_smbus_read_byte_data(client,
+					    LM63_REG_TACH_COUNT_MSB) << 8;
+			data->fan1_low = (i2c_smbus_read_byte_data(client,
+					  LM63_REG_TACH_LIMIT_LSB) & 0xFC)
+				       | (i2c_smbus_read_byte_data(client,
+					  LM63_REG_TACH_LIMIT_MSB) << 8);
+		}
+
+		data->pwm1_freq = i2c_smbus_read_byte_data(client,
+				  LM63_REG_PWM_FREQ);
+		if (data->pwm1_freq == 0)
+			data->pwm1_freq = 1;
+		data->pwm1_value = i2c_smbus_read_byte_data(client,
+				   LM63_REG_PWM_VALUE);
+
+		data->temp1_input = i2c_smbus_read_byte_data(client,
+				    LM63_REG_LOCAL_TEMP);
+		data->temp1_high = i2c_smbus_read_byte_data(client,
+				   LM63_REG_LOCAL_HIGH);
+
+		/* order matters for temp2_input */
+		data->temp2_input = i2c_smbus_read_byte_data(client,
+				    LM63_REG_REMOTE_TEMP_MSB) << 8;
+		data->temp2_input |= i2c_smbus_read_byte_data(client,
+				     LM63_REG_REMOTE_TEMP_LSB);
+		data->temp2_high = (i2c_smbus_read_byte_data(client,
+				   LM63_REG_REMOTE_HIGH_MSB) << 8)
+				 | i2c_smbus_read_byte_data(client,
+				   LM63_REG_REMOTE_HIGH_LSB);
+		data->temp2_low = (i2c_smbus_read_byte_data(client,
+				  LM63_REG_REMOTE_LOW_MSB) << 8)
+				| i2c_smbus_read_byte_data(client,
+				  LM63_REG_REMOTE_LOW_LSB);
+		data->temp2_crit = i2c_smbus_read_byte_data(client,
+				   LM63_REG_REMOTE_TCRIT);
+		data->temp2_crit_hyst = i2c_smbus_read_byte_data(client,
+					LM63_REG_REMOTE_TCRIT_HYST);
+
+		data->alarms = i2c_smbus_read_byte_data(client,
+			       LM63_REG_ALERT_STATUS) & 0x7F;
+
+		data->last_updated = jiffies;
+		data->valid = 1;
+	}
+
+	up(&data->update_lock);
+
+	return data;
+}
+
+static int __init sensors_lm63_init(void)
+{
+	return i2c_add_driver(&lm63_driver);
+}
+
+static void __exit sensors_lm63_exit(void)
+{
+	i2c_del_driver(&lm63_driver);
+}
+
+MODULE_AUTHOR("Jean Delvare <khali@linux-fr.org>");
+MODULE_DESCRIPTION("LM63 driver");
+MODULE_LICENSE("GPL");
+
+module_init(sensors_lm63_init);
+module_exit(sensors_lm63_exit);
diff --git a/drivers/i2c/chips/lm75.c b/drivers/i2c/chips/lm75.c
new file mode 100644
index 00000000000..0e86cc89398
--- /dev/null
+++ b/drivers/i2c/chips/lm75.c
@@ -0,0 +1,297 @@
+/*
+    lm75.c - Part of lm_sensors, Linux kernel modules for hardware
+             monitoring
+    Copyright (c) 1998, 1999  Frodo Looijaard <frodol@dds.nl>
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/jiffies.h>
+#include <linux/i2c.h>
+#include <linux/i2c-sensor.h>
+#include "lm75.h"
+
+
+/* Addresses to scan */
+static unsigned short normal_i2c[] = { 0x48, 0x49, 0x4a, 0x4b, 0x4c,
+					0x4d, 0x4e, 0x4f, I2C_CLIENT_END };
+static unsigned int normal_isa[] = { I2C_CLIENT_ISA_END };
+
+/* Insmod parameters */
+SENSORS_INSMOD_1(lm75);
+
+/* Many LM75 constants specified below */
+
+/* The LM75 registers */
+#define LM75_REG_TEMP		0x00
+#define LM75_REG_CONF		0x01
+#define LM75_REG_TEMP_HYST	0x02
+#define LM75_REG_TEMP_OS	0x03
+
+/* Each client has this additional data */
+struct lm75_data {
+	struct i2c_client	client;
+	struct semaphore	update_lock;
+	char			valid;		/* !=0 if following fields are valid */
+	unsigned long		last_updated;	/* In jiffies */
+	u16			temp_input;	/* Register values */
+	u16			temp_max;
+	u16			temp_hyst;
+};
+
+static int lm75_attach_adapter(struct i2c_adapter *adapter);
+static int lm75_detect(struct i2c_adapter *adapter, int address, int kind);
+static void lm75_init_client(struct i2c_client *client);
+static int lm75_detach_client(struct i2c_client *client);
+static int lm75_read_value(struct i2c_client *client, u8 reg);
+static int lm75_write_value(struct i2c_client *client, u8 reg, u16 value);
+static struct lm75_data *lm75_update_device(struct device *dev);
+
+
+/* This is the driver that will be inserted */
+static struct i2c_driver lm75_driver = {
+	.owner		= THIS_MODULE,
+	.name		= "lm75",
+	.id		= I2C_DRIVERID_LM75,
+	.flags		= I2C_DF_NOTIFY,
+	.attach_adapter	= lm75_attach_adapter,
+	.detach_client	= lm75_detach_client,
+};
+
+#define show(value)	\
+static ssize_t show_##value(struct device *dev, char *buf)		\
+{									\
+	struct lm75_data *data = lm75_update_device(dev);		\
+	return sprintf(buf, "%d\n", LM75_TEMP_FROM_REG(data->value));	\
+}
+show(temp_max);
+show(temp_hyst);
+show(temp_input);
+
+#define set(value, reg)	\
+static ssize_t set_##value(struct device *dev, const char *buf, size_t count)	\
+{								\
+	struct i2c_client *client = to_i2c_client(dev);		\
+	struct lm75_data *data = i2c_get_clientdata(client);	\
+	int temp = simple_strtoul(buf, NULL, 10);		\
+								\
+	down(&data->update_lock);				\
+	data->value = LM75_TEMP_TO_REG(temp);			\
+	lm75_write_value(client, reg, data->value);		\
+	up(&data->update_lock);					\
+	return count;						\
+}
+set(temp_max, LM75_REG_TEMP_OS);
+set(temp_hyst, LM75_REG_TEMP_HYST);
+
+static DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO, show_temp_max, set_temp_max);
+static DEVICE_ATTR(temp1_max_hyst, S_IWUSR | S_IRUGO, show_temp_hyst, set_temp_hyst);
+static DEVICE_ATTR(temp1_input, S_IRUGO, show_temp_input, NULL);
+
+static int lm75_attach_adapter(struct i2c_adapter *adapter)
+{
+	if (!(adapter->class & I2C_CLASS_HWMON))
+		return 0;
+	return i2c_detect(adapter, &addr_data, lm75_detect);
+}
+
+/* This function is called by i2c_detect */
+static int lm75_detect(struct i2c_adapter *adapter, int address, int kind)
+{
+	int i;
+	struct i2c_client *new_client;
+	struct lm75_data *data;
+	int err = 0;
+	const char *name = "";
+
+	/* Make sure we aren't probing the ISA bus!! This is just a safety check
+	   at this moment; i2c_detect really won't call us. */
+#ifdef DEBUG
+	if (i2c_is_isa_adapter(adapter)) {
+		dev_dbg(&adapter->dev,
+			"lm75_detect called for an ISA bus adapter?!?\n");
+		goto exit;
+	}
+#endif
+
+	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA |
+				     I2C_FUNC_SMBUS_WORD_DATA))
+		goto exit;
+
+	/* OK. For now, we presume we have a valid client. We now create the
+	   client structure, even though we cannot fill it completely yet.
+	   But it allows us to access lm75_{read,write}_value. */
+	if (!(data = kmalloc(sizeof(struct lm75_data), GFP_KERNEL))) {
+		err = -ENOMEM;
+		goto exit;
+	}
+	memset(data, 0, sizeof(struct lm75_data));
+
+	new_client = &data->client;
+	i2c_set_clientdata(new_client, data);
+	new_client->addr = address;
+	new_client->adapter = adapter;
+	new_client->driver = &lm75_driver;
+	new_client->flags = 0;
+
+	/* Now, we do the remaining detection. There is no identification-
+	   dedicated register so we have to rely on several tricks:
+	   unused bits, registers cycling over 8-address boundaries,
+	   addresses 0x04-0x07 returning the last read value.
+	   The cycling+unused addresses combination is not tested,
+	   since it would significantly slow the detection down and would
+	   hardly add any value. */
+	if (kind < 0) {
+		int cur, conf, hyst, os;
+
+		/* Unused addresses */
+		cur = i2c_smbus_read_word_data(new_client, 0);
+		conf = i2c_smbus_read_byte_data(new_client, 1);
+		hyst = i2c_smbus_read_word_data(new_client, 2);
+		if (i2c_smbus_read_word_data(new_client, 4) != hyst
+		 || i2c_smbus_read_word_data(new_client, 5) != hyst
+		 || i2c_smbus_read_word_data(new_client, 6) != hyst
+		 || i2c_smbus_read_word_data(new_client, 7) != hyst)
+		 	goto exit_free;
+		os = i2c_smbus_read_word_data(new_client, 3);
+		if (i2c_smbus_read_word_data(new_client, 4) != os
+		 || i2c_smbus_read_word_data(new_client, 5) != os
+		 || i2c_smbus_read_word_data(new_client, 6) != os
+		 || i2c_smbus_read_word_data(new_client, 7) != os)
+		 	goto exit_free;
+
+		/* Unused bits */
+		if (conf & 0xe0)
+		 	goto exit_free;
+
+		/* Addresses cycling */
+		for (i = 8; i < 0xff; i += 8)
+			if (i2c_smbus_read_byte_data(new_client, i + 1) != conf
+			 || i2c_smbus_read_word_data(new_client, i + 2) != hyst
+			 || i2c_smbus_read_word_data(new_client, i + 3) != os)
+				goto exit_free;
+	}
+
+	/* Determine the chip type - only one kind supported! */
+	if (kind <= 0)
+		kind = lm75;
+
+	if (kind == lm75) {
+		name = "lm75";
+	}
+
+	/* Fill in the remaining client fields and put it into the global list */
+	strlcpy(new_client->name, name, I2C_NAME_SIZE);
+	data->valid = 0;
+	init_MUTEX(&data->update_lock);
+
+	/* Tell the I2C layer a new client has arrived */
+	if ((err = i2c_attach_client(new_client)))
+		goto exit_free;
+
+	/* Initialize the LM75 chip */
+	lm75_init_client(new_client);
+	
+	/* Register sysfs hooks */
+	device_create_file(&new_client->dev, &dev_attr_temp1_max);
+	device_create_file(&new_client->dev, &dev_attr_temp1_max_hyst);
+	device_create_file(&new_client->dev, &dev_attr_temp1_input);
+
+	return 0;
+
+exit_free:
+	kfree(data);
+exit:
+	return err;
+}
+
+static int lm75_detach_client(struct i2c_client *client)
+{
+	i2c_detach_client(client);
+	kfree(i2c_get_clientdata(client));
+	return 0;
+}
+
+/* All registers are word-sized, except for the configuration register.
+   LM75 uses a high-byte first convention, which is exactly opposite to
+   the usual practice. */
+static int lm75_read_value(struct i2c_client *client, u8 reg)
+{
+	if (reg == LM75_REG_CONF)
+		return i2c_smbus_read_byte_data(client, reg);
+	else
+		return swab16(i2c_smbus_read_word_data(client, reg));
+}
+
+/* All registers are word-sized, except for the configuration register.
+   LM75 uses a high-byte first convention, which is exactly opposite to
+   the usual practice. */
+static int lm75_write_value(struct i2c_client *client, u8 reg, u16 value)
+{
+	if (reg == LM75_REG_CONF)
+		return i2c_smbus_write_byte_data(client, reg, value);
+	else
+		return i2c_smbus_write_word_data(client, reg, swab16(value));
+}
+
+static void lm75_init_client(struct i2c_client *client)
+{
+	/* Initialize the LM75 chip */
+	lm75_write_value(client, LM75_REG_CONF, 0);
+}
+
+static struct lm75_data *lm75_update_device(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct lm75_data *data = i2c_get_clientdata(client);
+
+	down(&data->update_lock);
+
+	if (time_after(jiffies, data->last_updated + HZ + HZ / 2)
+	    || !data->valid) {
+		dev_dbg(&client->dev, "Starting lm75 update\n");
+
+		data->temp_input = lm75_read_value(client, LM75_REG_TEMP);
+		data->temp_max = lm75_read_value(client, LM75_REG_TEMP_OS);
+		data->temp_hyst = lm75_read_value(client, LM75_REG_TEMP_HYST);
+		data->last_updated = jiffies;
+		data->valid = 1;
+	}
+
+	up(&data->update_lock);
+
+	return data;
+}
+
+static int __init sensors_lm75_init(void)
+{
+	return i2c_add_driver(&lm75_driver);
+}
+
+static void __exit sensors_lm75_exit(void)
+{
+	i2c_del_driver(&lm75_driver);
+}
+
+MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl>");
+MODULE_DESCRIPTION("LM75 driver");
+MODULE_LICENSE("GPL");
+
+module_init(sensors_lm75_init);
+module_exit(sensors_lm75_exit);
diff --git a/drivers/i2c/chips/lm75.h b/drivers/i2c/chips/lm75.h
new file mode 100644
index 00000000000..63e3f2fb4c2
--- /dev/null
+++ b/drivers/i2c/chips/lm75.h
@@ -0,0 +1,49 @@
+/*
+    lm75.h - Part of lm_sensors, Linux kernel modules for hardware
+             monitoring
+    Copyright (c) 2003 Mark M. Hoffman <mhoffman@lightlink.com>
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+/*
+    This file contains common code for encoding/decoding LM75 type
+    temperature readings, which are emulated by many of the chips
+    we support.  As the user is unlikely to load more than one driver
+    which contains this code, we don't worry about the wasted space.
+*/
+
+#include <linux/i2c-sensor.h>
+
+/* straight from the datasheet */
+#define LM75_TEMP_MIN (-55000)
+#define LM75_TEMP_MAX 125000
+
+/* TEMP: 0.001C/bit (-55C to +125C)
+   REG: (0.5C/bit, two's complement) << 7 */
+static inline u16 LM75_TEMP_TO_REG(int temp)
+{
+	int ntemp = SENSORS_LIMIT(temp, LM75_TEMP_MIN, LM75_TEMP_MAX);
+	ntemp += (ntemp<0 ? -250 : 250);
+	return (u16)((ntemp / 500) << 7);
+}
+
+static inline int LM75_TEMP_FROM_REG(u16 reg)
+{
+	/* use integer division instead of equivalent right shift to
+	   guarantee arithmetic shift and preserve the sign */
+	return ((s16)reg / 128) * 500;
+}
+
diff --git a/drivers/i2c/chips/lm77.c b/drivers/i2c/chips/lm77.c
new file mode 100644
index 00000000000..f56b7a37de7
--- /dev/null
+++ b/drivers/i2c/chips/lm77.c
@@ -0,0 +1,421 @@
+/*
+    lm77.c - Part of lm_sensors, Linux kernel modules for hardware
+             monitoring
+
+    Copyright (c) 2004  Andras BALI <drewie@freemail.hu>
+
+    Heavily based on lm75.c by Frodo Looijaard <frodol@dds.nl>.  The LM77
+    is a temperature sensor and thermal window comparator with 0.5 deg
+    resolution made by National Semiconductor.  Complete datasheet can be
+    obtained at their site:
+       http://www.national.com/pf/LM/LM77.html
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/jiffies.h>
+#include <linux/i2c.h>
+#include <linux/i2c-sensor.h>
+
+
+/* Addresses to scan */
+static unsigned short normal_i2c[] = { 0x48, 0x49, 0x4a, 0x4b, I2C_CLIENT_END };
+static unsigned int normal_isa[] = { I2C_CLIENT_ISA_END };
+
+/* Insmod parameters */
+SENSORS_INSMOD_1(lm77);
+
+/* The LM77 registers */
+#define LM77_REG_TEMP		0x00
+#define LM77_REG_CONF		0x01
+#define LM77_REG_TEMP_HYST	0x02
+#define LM77_REG_TEMP_CRIT	0x03
+#define LM77_REG_TEMP_MIN	0x04
+#define LM77_REG_TEMP_MAX	0x05
+
+/* Each client has this additional data */
+struct lm77_data {
+	struct i2c_client	client;
+	struct semaphore	update_lock;
+	char			valid;
+	unsigned long		last_updated;	/* In jiffies */
+	int			temp_input;	/* Temperatures */
+	int			temp_crit;
+	int			temp_min;
+	int			temp_max;
+	int			temp_hyst;
+	u8			alarms;
+};
+
+static int lm77_attach_adapter(struct i2c_adapter *adapter);
+static int lm77_detect(struct i2c_adapter *adapter, int address, int kind);
+static void lm77_init_client(struct i2c_client *client);
+static int lm77_detach_client(struct i2c_client *client);
+static u16 lm77_read_value(struct i2c_client *client, u8 reg);
+static int lm77_write_value(struct i2c_client *client, u8 reg, u16 value);
+
+static struct lm77_data *lm77_update_device(struct device *dev);
+
+
+/* This is the driver that will be inserted */
+static struct i2c_driver lm77_driver = {
+	.owner		= THIS_MODULE,
+	.name		= "lm77",
+	.flags		= I2C_DF_NOTIFY,
+	.attach_adapter = lm77_attach_adapter,
+	.detach_client	= lm77_detach_client,
+};
+
+/* straight from the datasheet */
+#define LM77_TEMP_MIN (-55000)
+#define LM77_TEMP_MAX 125000
+
+/* In the temperature registers, the low 3 bits are not part of the
+   temperature values; they are the status bits. */
+static inline u16 LM77_TEMP_TO_REG(int temp)
+{
+	int ntemp = SENSORS_LIMIT(temp, LM77_TEMP_MIN, LM77_TEMP_MAX);
+	return (u16)((ntemp / 500) * 8);
+}
+
+static inline int LM77_TEMP_FROM_REG(u16 reg)
+{
+	return ((int)reg / 8) * 500;
+}
+
+/* sysfs stuff */
+
+/* read routines for temperature limits */
+#define show(value)	\
+static ssize_t show_##value(struct device *dev, char *buf)	\
+{								\
+	struct lm77_data *data = lm77_update_device(dev);	\
+	return sprintf(buf, "%d\n", data->value);		\
+}
+
+show(temp_input);
+show(temp_crit);
+show(temp_min);
+show(temp_max);
+show(alarms);
+
+/* read routines for hysteresis values */
+static ssize_t show_temp_crit_hyst(struct device *dev, char *buf)
+{
+	struct lm77_data *data = lm77_update_device(dev);
+	return sprintf(buf, "%d\n", data->temp_crit - data->temp_hyst);
+}
+static ssize_t show_temp_min_hyst(struct device *dev, char *buf)
+{
+	struct lm77_data *data = lm77_update_device(dev);
+	return sprintf(buf, "%d\n", data->temp_min + data->temp_hyst);
+}
+static ssize_t show_temp_max_hyst(struct device *dev, char *buf)
+{
+	struct lm77_data *data = lm77_update_device(dev);
+	return sprintf(buf, "%d\n", data->temp_max - data->temp_hyst);
+}
+
+/* write routines */
+#define set(value, reg)	\
+static ssize_t set_##value(struct device *dev, const char *buf, size_t count)	\
+{										\
+	struct i2c_client *client = to_i2c_client(dev);				\
+	struct lm77_data *data = i2c_get_clientdata(client);			\
+	long val = simple_strtoul(buf, NULL, 10);				\
+										\
+	down(&data->update_lock);						\
+	data->value = val;				\
+	lm77_write_value(client, reg, LM77_TEMP_TO_REG(data->value));		\
+	up(&data->update_lock);							\
+	return count;								\
+}
+
+set(temp_min, LM77_REG_TEMP_MIN);
+set(temp_max, LM77_REG_TEMP_MAX);
+
+/* hysteresis is stored as a relative value on the chip, so it has to be
+   converted first */
+static ssize_t set_temp_crit_hyst(struct device *dev, const char *buf, size_t count)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct lm77_data *data = i2c_get_clientdata(client);
+	unsigned long val = simple_strtoul(buf, NULL, 10);
+
+	down(&data->update_lock);
+	data->temp_hyst = data->temp_crit - val;
+	lm77_write_value(client, LM77_REG_TEMP_HYST,
+			 LM77_TEMP_TO_REG(data->temp_hyst));
+	up(&data->update_lock);
+	return count;
+}
+
+/* preserve hysteresis when setting T_crit */
+static ssize_t set_temp_crit(struct device *dev, const char *buf, size_t count)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct lm77_data *data = i2c_get_clientdata(client);
+	long val = simple_strtoul(buf, NULL, 10);
+	int oldcrithyst;
+	
+	down(&data->update_lock);
+	oldcrithyst = data->temp_crit - data->temp_hyst;
+	data->temp_crit = val;
+	data->temp_hyst = data->temp_crit - oldcrithyst;
+	lm77_write_value(client, LM77_REG_TEMP_CRIT,
+			 LM77_TEMP_TO_REG(data->temp_crit));
+	lm77_write_value(client, LM77_REG_TEMP_HYST,
+			 LM77_TEMP_TO_REG(data->temp_hyst));
+	up(&data->update_lock);
+	return count;
+}
+
+static DEVICE_ATTR(temp1_input, S_IRUGO,
+		   show_temp_input, NULL);
+static DEVICE_ATTR(temp1_crit, S_IWUSR | S_IRUGO,
+		   show_temp_crit, set_temp_crit);
+static DEVICE_ATTR(temp1_min, S_IWUSR | S_IRUGO,
+		   show_temp_min, set_temp_min);
+static DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO,
+		   show_temp_max, set_temp_max);
+
+static DEVICE_ATTR(temp1_crit_hyst, S_IWUSR | S_IRUGO,
+		   show_temp_crit_hyst, set_temp_crit_hyst);
+static DEVICE_ATTR(temp1_min_hyst, S_IRUGO,
+		   show_temp_min_hyst, NULL);
+static DEVICE_ATTR(temp1_max_hyst, S_IRUGO,
+		   show_temp_max_hyst, NULL);
+
+static DEVICE_ATTR(alarms, S_IRUGO,
+		   show_alarms, NULL);
+
+static int lm77_attach_adapter(struct i2c_adapter *adapter)
+{
+	if (!(adapter->class & I2C_CLASS_HWMON))
+		return 0;
+	return i2c_detect(adapter, &addr_data, lm77_detect);
+}
+
+/* This function is called by i2c_detect */
+static int lm77_detect(struct i2c_adapter *adapter, int address, int kind)
+{
+	struct i2c_client *new_client;
+	struct lm77_data *data;
+	int err = 0;
+	const char *name = "";
+
+	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA |
+				     I2C_FUNC_SMBUS_WORD_DATA))
+		goto exit;
+
+	/* OK. For now, we presume we have a valid client. We now create the
+	   client structure, even though we cannot fill it completely yet.
+	   But it allows us to access lm77_{read,write}_value. */
+	if (!(data = kmalloc(sizeof(struct lm77_data), GFP_KERNEL))) {
+		err = -ENOMEM;
+		goto exit;
+	}
+	memset(data, 0, sizeof(struct lm77_data));
+
+	new_client = &data->client;
+	i2c_set_clientdata(new_client, data);
+	new_client->addr = address;
+	new_client->adapter = adapter;
+	new_client->driver = &lm77_driver;
+	new_client->flags = 0;
+
+	/* Here comes the remaining detection.  Since the LM77 has no
+	   register dedicated to identification, we have to rely on the
+	   following tricks:
+
+	   1. the high 4 bits represent the sign and thus they should
+	      always be the same
+	   2. the high 3 bits are unused in the configuration register
+	   3. addresses 0x06 and 0x07 return the last read value
+	   4. registers cycling over 8-address boundaries
+
+	   Word-sized registers are high-byte first. */
+	if (kind < 0) {
+		int i, cur, conf, hyst, crit, min, max;
+
+		/* addresses cycling */
+		cur = i2c_smbus_read_word_data(new_client, 0);
+		conf = i2c_smbus_read_byte_data(new_client, 1);
+		hyst = i2c_smbus_read_word_data(new_client, 2);
+		crit = i2c_smbus_read_word_data(new_client, 3);
+		min = i2c_smbus_read_word_data(new_client, 4);
+		max = i2c_smbus_read_word_data(new_client, 5);
+		for (i = 8; i <= 0xff; i += 8)
+			if (i2c_smbus_read_byte_data(new_client, i + 1) != conf
+			    || i2c_smbus_read_word_data(new_client, i + 2) != hyst
+			    || i2c_smbus_read_word_data(new_client, i + 3) != crit
+			    || i2c_smbus_read_word_data(new_client, i + 4) != min
+			    || i2c_smbus_read_word_data(new_client, i + 5) != max)
+				goto exit_free;
+
+		/* sign bits */
+		if (((cur & 0x00f0) != 0xf0 && (cur & 0x00f0) != 0x0)
+		    || ((hyst & 0x00f0) != 0xf0 && (hyst & 0x00f0) != 0x0)
+		    || ((crit & 0x00f0) != 0xf0 && (crit & 0x00f0) != 0x0)
+		    || ((min & 0x00f0) != 0xf0 && (min & 0x00f0) != 0x0)
+		    || ((max & 0x00f0) != 0xf0 && (max & 0x00f0) != 0x0))
+			goto exit_free;
+
+		/* unused bits */
+		if (conf & 0xe0)
+			goto exit_free;
+
+		/* 0x06 and 0x07 return the last read value */
+		cur = i2c_smbus_read_word_data(new_client, 0);
+		if (i2c_smbus_read_word_data(new_client, 6) != cur
+		    || i2c_smbus_read_word_data(new_client, 7) != cur)
+			goto exit_free;
+		hyst = i2c_smbus_read_word_data(new_client, 2);
+		if (i2c_smbus_read_word_data(new_client, 6) != hyst
+		    || i2c_smbus_read_word_data(new_client, 7) != hyst)
+			goto exit_free;
+		min = i2c_smbus_read_word_data(new_client, 4);
+		if (i2c_smbus_read_word_data(new_client, 6) != min
+		    || i2c_smbus_read_word_data(new_client, 7) != min)
+			goto exit_free;
+
+	}
+
+	/* Determine the chip type - only one kind supported! */
+	if (kind <= 0)
+		kind = lm77;
+
+	if (kind == lm77) {
+		name = "lm77";
+	}
+
+	/* Fill in the remaining client fields and put it into the global list */
+	strlcpy(new_client->name, name, I2C_NAME_SIZE);
+	data->valid = 0;
+	init_MUTEX(&data->update_lock);
+
+	/* Tell the I2C layer a new client has arrived */
+	if ((err = i2c_attach_client(new_client)))
+		goto exit_free;
+
+	/* Initialize the LM77 chip */
+	lm77_init_client(new_client);
+
+	/* Register sysfs hooks */
+	device_create_file(&new_client->dev, &dev_attr_temp1_input);
+	device_create_file(&new_client->dev, &dev_attr_temp1_crit);
+	device_create_file(&new_client->dev, &dev_attr_temp1_min);
+	device_create_file(&new_client->dev, &dev_attr_temp1_max);
+	device_create_file(&new_client->dev, &dev_attr_temp1_crit_hyst);
+	device_create_file(&new_client->dev, &dev_attr_temp1_min_hyst);
+	device_create_file(&new_client->dev, &dev_attr_temp1_max_hyst);
+	device_create_file(&new_client->dev, &dev_attr_alarms);
+	return 0;
+
+exit_free:
+	kfree(data);
+exit:
+	return err;
+}
+
+static int lm77_detach_client(struct i2c_client *client)
+{
+	i2c_detach_client(client);
+	kfree(i2c_get_clientdata(client));
+	return 0;
+}
+
+/* All registers are word-sized, except for the configuration register.
+   The LM77 uses the high-byte first convention. */
+static u16 lm77_read_value(struct i2c_client *client, u8 reg)
+{
+	if (reg == LM77_REG_CONF)
+		return i2c_smbus_read_byte_data(client, reg);
+	else
+		return swab16(i2c_smbus_read_word_data(client, reg));
+}
+
+static int lm77_write_value(struct i2c_client *client, u8 reg, u16 value)
+{
+	if (reg == LM77_REG_CONF)
+		return i2c_smbus_write_byte_data(client, reg, value);
+	else
+		return i2c_smbus_write_word_data(client, reg, swab16(value));
+}
+
+static void lm77_init_client(struct i2c_client *client)
+{
+	/* Initialize the LM77 chip - turn off shutdown mode */
+	int conf = lm77_read_value(client, LM77_REG_CONF);
+	if (conf & 1)
+		lm77_write_value(client, LM77_REG_CONF, conf & 0xfe);
+}
+
+static struct lm77_data *lm77_update_device(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct lm77_data *data = i2c_get_clientdata(client);
+
+	down(&data->update_lock);
+
+	if (time_after(jiffies, data->last_updated + HZ + HZ / 2)
+	    || !data->valid) {
+		dev_dbg(&client->dev, "Starting lm77 update\n");
+		data->temp_input =
+			LM77_TEMP_FROM_REG(lm77_read_value(client,
+							   LM77_REG_TEMP));
+		data->temp_hyst =
+			LM77_TEMP_FROM_REG(lm77_read_value(client,
+							   LM77_REG_TEMP_HYST));
+		data->temp_crit =
+			LM77_TEMP_FROM_REG(lm77_read_value(client,
+							   LM77_REG_TEMP_CRIT));
+		data->temp_min =
+			LM77_TEMP_FROM_REG(lm77_read_value(client,
+							   LM77_REG_TEMP_MIN));
+		data->temp_max =
+			LM77_TEMP_FROM_REG(lm77_read_value(client,
+							   LM77_REG_TEMP_MAX));
+		data->alarms =
+			lm77_read_value(client, LM77_REG_TEMP) & 0x0007;
+		data->last_updated = jiffies;
+		data->valid = 1;
+	}
+
+	up(&data->update_lock);
+
+	return data;
+}
+
+static int __init sensors_lm77_init(void)
+{
+	return i2c_add_driver(&lm77_driver);
+}
+
+static void __exit sensors_lm77_exit(void)
+{
+	i2c_del_driver(&lm77_driver);
+}
+
+MODULE_AUTHOR("Andras BALI <drewie@freemail.hu>");
+MODULE_DESCRIPTION("LM77 driver");
+MODULE_LICENSE("GPL");
+
+module_init(sensors_lm77_init);
+module_exit(sensors_lm77_exit);
diff --git a/drivers/i2c/chips/lm78.c b/drivers/i2c/chips/lm78.c
new file mode 100644
index 00000000000..6d52d14eb31
--- /dev/null
+++ b/drivers/i2c/chips/lm78.c
@@ -0,0 +1,796 @@
+/*
+    lm78.c - Part of lm_sensors, Linux kernel modules for hardware
+             monitoring
+    Copyright (c) 1998, 1999  Frodo Looijaard <frodol@dds.nl> 
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/jiffies.h>
+#include <linux/i2c.h>
+#include <linux/i2c-sensor.h>
+#include <asm/io.h>
+
+/* Addresses to scan */
+static unsigned short normal_i2c[] = { 0x20, 0x21, 0x22, 0x23, 0x24,
+					0x25, 0x26, 0x27, 0x28, 0x29,
+					0x2a, 0x2b, 0x2c, 0x2d, 0x2e,
+					0x2f, I2C_CLIENT_END };
+static unsigned int normal_isa[] = { 0x0290, I2C_CLIENT_ISA_END };
+
+/* Insmod parameters */
+SENSORS_INSMOD_3(lm78, lm78j, lm79);
+
+/* Many LM78 constants specified below */
+
+/* Length of ISA address segment */
+#define LM78_EXTENT 8
+
+/* Where are the ISA address/data registers relative to the base address */
+#define LM78_ADDR_REG_OFFSET 5
+#define LM78_DATA_REG_OFFSET 6
+
+/* The LM78 registers */
+#define LM78_REG_IN_MAX(nr) (0x2b + (nr) * 2)
+#define LM78_REG_IN_MIN(nr) (0x2c + (nr) * 2)
+#define LM78_REG_IN(nr) (0x20 + (nr))
+
+#define LM78_REG_FAN_MIN(nr) (0x3b + (nr))
+#define LM78_REG_FAN(nr) (0x28 + (nr))
+
+#define LM78_REG_TEMP 0x27
+#define LM78_REG_TEMP_OVER 0x39
+#define LM78_REG_TEMP_HYST 0x3a
+
+#define LM78_REG_ALARM1 0x41
+#define LM78_REG_ALARM2 0x42
+
+#define LM78_REG_VID_FANDIV 0x47
+
+#define LM78_REG_CONFIG 0x40
+#define LM78_REG_CHIPID 0x49
+#define LM78_REG_I2C_ADDR 0x48
+
+
+/* Conversions. Rounding and limit checking is only done on the TO_REG 
+   variants. */
+
+/* IN: mV, (0V to 4.08V)
+   REG: 16mV/bit */
+static inline u8 IN_TO_REG(unsigned long val)
+{
+	unsigned long nval = SENSORS_LIMIT(val, 0, 4080);
+	return (nval + 8) / 16;
+}
+#define IN_FROM_REG(val) ((val) *  16)
+
+static inline u8 FAN_TO_REG(long rpm, int div)
+{
+	if (rpm <= 0)
+		return 255;
+	return SENSORS_LIMIT((1350000 + rpm * div / 2) / (rpm * div), 1, 254);
+}
+
+static inline int FAN_FROM_REG(u8 val, int div)
+{
+	return val==0 ? -1 : val==255 ? 0 : 1350000/(val*div);
+}
+
+/* TEMP: mC (-128C to +127C)
+   REG: 1C/bit, two's complement */
+static inline s8 TEMP_TO_REG(int val)
+{
+	int nval = SENSORS_LIMIT(val, -128000, 127000) ;
+	return nval<0 ? (nval-500)/1000 : (nval+500)/1000;
+}
+
+static inline int TEMP_FROM_REG(s8 val)
+{
+	return val * 1000;
+}
+
+/* VID: mV
+   REG: (see doc/vid) */
+static inline int VID_FROM_REG(u8 val)
+{
+	return val==0x1f ? 0 : val>=0x10 ? 5100-val*100 : 2050-val*50;
+}
+
+#define DIV_FROM_REG(val) (1 << (val))
+
+/* There are some complications in a module like this. First off, LM78 chips
+   may be both present on the SMBus and the ISA bus, and we have to handle
+   those cases separately at some places. Second, there might be several
+   LM78 chips available (well, actually, that is probably never done; but
+   it is a clean illustration of how to handle a case like that). Finally,
+   a specific chip may be attached to *both* ISA and SMBus, and we would
+   not like to detect it double. Fortunately, in the case of the LM78 at
+   least, a register tells us what SMBus address we are on, so that helps
+   a bit - except if there could be more than one SMBus. Groan. No solution
+   for this yet. */
+
+/* This module may seem overly long and complicated. In fact, it is not so
+   bad. Quite a lot of bookkeeping is done. A real driver can often cut
+   some corners. */
+
+/* For each registered LM78, we need to keep some data in memory. That
+   data is pointed to by lm78_list[NR]->data. The structure itself is
+   dynamically allocated, at the same time when a new lm78 client is
+   allocated. */
+struct lm78_data {
+	struct i2c_client client;
+	struct semaphore lock;
+	enum chips type;
+
+	struct semaphore update_lock;
+	char valid;		/* !=0 if following fields are valid */
+	unsigned long last_updated;	/* In jiffies */
+
+	u8 in[7];		/* Register value */
+	u8 in_max[7];		/* Register value */
+	u8 in_min[7];		/* Register value */
+	u8 fan[3];		/* Register value */
+	u8 fan_min[3];		/* Register value */
+	s8 temp;		/* Register value */
+	s8 temp_over;		/* Register value */
+	s8 temp_hyst;		/* Register value */
+	u8 fan_div[3];		/* Register encoding, shifted right */
+	u8 vid;			/* Register encoding, combined */
+	u16 alarms;		/* Register encoding, combined */
+};
+
+
+static int lm78_attach_adapter(struct i2c_adapter *adapter);
+static int lm78_detect(struct i2c_adapter *adapter, int address, int kind);
+static int lm78_detach_client(struct i2c_client *client);
+
+static int lm78_read_value(struct i2c_client *client, u8 register);
+static int lm78_write_value(struct i2c_client *client, u8 register, u8 value);
+static struct lm78_data *lm78_update_device(struct device *dev);
+static void lm78_init_client(struct i2c_client *client);
+
+
+static struct i2c_driver lm78_driver = {
+	.owner		= THIS_MODULE,
+	.name		= "lm78",
+	.id		= I2C_DRIVERID_LM78,
+	.flags		= I2C_DF_NOTIFY,
+	.attach_adapter	= lm78_attach_adapter,
+	.detach_client	= lm78_detach_client,
+};
+
+/* 7 Voltages */
+static ssize_t show_in(struct device *dev, char *buf, int nr)
+{
+	struct lm78_data *data = lm78_update_device(dev);
+	return sprintf(buf, "%d\n", IN_FROM_REG(data->in[nr]));
+}
+
+static ssize_t show_in_min(struct device *dev, char *buf, int nr)
+{
+	struct lm78_data *data = lm78_update_device(dev);
+	return sprintf(buf, "%d\n", IN_FROM_REG(data->in_min[nr]));
+}
+
+static ssize_t show_in_max(struct device *dev, char *buf, int nr)
+{
+	struct lm78_data *data = lm78_update_device(dev);
+	return sprintf(buf, "%d\n", IN_FROM_REG(data->in_max[nr]));
+}
+
+static ssize_t set_in_min(struct device *dev, const char *buf,
+		size_t count, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct lm78_data *data = i2c_get_clientdata(client);
+	unsigned long val = simple_strtoul(buf, NULL, 10);
+
+	down(&data->update_lock);
+	data->in_min[nr] = IN_TO_REG(val);
+	lm78_write_value(client, LM78_REG_IN_MIN(nr), data->in_min[nr]);
+	up(&data->update_lock);
+	return count;
+}
+
+static ssize_t set_in_max(struct device *dev, const char *buf,
+		size_t count, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct lm78_data *data = i2c_get_clientdata(client);
+	unsigned long val = simple_strtoul(buf, NULL, 10);
+
+	down(&data->update_lock);
+	data->in_max[nr] = IN_TO_REG(val);
+	lm78_write_value(client, LM78_REG_IN_MAX(nr), data->in_max[nr]);
+	up(&data->update_lock);
+	return count;
+}
+	
+#define show_in_offset(offset)					\
+static ssize_t							\
+	show_in##offset (struct device *dev, char *buf)		\
+{								\
+	return show_in(dev, buf, offset);			\
+}								\
+static DEVICE_ATTR(in##offset##_input, S_IRUGO, 		\
+		show_in##offset, NULL);				\
+static ssize_t							\
+	show_in##offset##_min (struct device *dev, char *buf)   \
+{								\
+	return show_in_min(dev, buf, offset);			\
+}								\
+static ssize_t							\
+	show_in##offset##_max (struct device *dev, char *buf)   \
+{								\
+	return show_in_max(dev, buf, offset);			\
+}								\
+static ssize_t set_in##offset##_min (struct device *dev,	\
+		const char *buf, size_t count)			\
+{								\
+	return set_in_min(dev, buf, count, offset);		\
+}								\
+static ssize_t set_in##offset##_max (struct device *dev,	\
+		const char *buf, size_t count)			\
+{								\
+	return set_in_max(dev, buf, count, offset);		\
+}								\
+static DEVICE_ATTR(in##offset##_min, S_IRUGO | S_IWUSR,		\
+		show_in##offset##_min, set_in##offset##_min);	\
+static DEVICE_ATTR(in##offset##_max, S_IRUGO | S_IWUSR,		\
+		show_in##offset##_max, set_in##offset##_max);
+
+show_in_offset(0);
+show_in_offset(1);
+show_in_offset(2);
+show_in_offset(3);
+show_in_offset(4);
+show_in_offset(5);
+show_in_offset(6);
+
+/* Temperature */
+static ssize_t show_temp(struct device *dev, char *buf)
+{
+	struct lm78_data *data = lm78_update_device(dev);
+	return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp));
+}
+
+static ssize_t show_temp_over(struct device *dev, char *buf)
+{
+	struct lm78_data *data = lm78_update_device(dev);
+	return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_over));
+}
+
+static ssize_t set_temp_over(struct device *dev, const char *buf, size_t count)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct lm78_data *data = i2c_get_clientdata(client);
+	long val = simple_strtol(buf, NULL, 10);
+
+	down(&data->update_lock);
+	data->temp_over = TEMP_TO_REG(val);
+	lm78_write_value(client, LM78_REG_TEMP_OVER, data->temp_over);
+	up(&data->update_lock);
+	return count;
+}
+
+static ssize_t show_temp_hyst(struct device *dev, char *buf)
+{
+	struct lm78_data *data = lm78_update_device(dev);
+	return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_hyst));
+}
+
+static ssize_t set_temp_hyst(struct device *dev, const char *buf, size_t count)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct lm78_data *data = i2c_get_clientdata(client);
+	long val = simple_strtol(buf, NULL, 10);
+
+	down(&data->update_lock);
+	data->temp_hyst = TEMP_TO_REG(val);
+	lm78_write_value(client, LM78_REG_TEMP_HYST, data->temp_hyst);
+	up(&data->update_lock);
+	return count;
+}
+
+static DEVICE_ATTR(temp1_input, S_IRUGO, show_temp, NULL);
+static DEVICE_ATTR(temp1_max, S_IRUGO | S_IWUSR,
+		show_temp_over, set_temp_over);
+static DEVICE_ATTR(temp1_max_hyst, S_IRUGO | S_IWUSR,
+		show_temp_hyst, set_temp_hyst);
+
+/* 3 Fans */
+static ssize_t show_fan(struct device *dev, char *buf, int nr)
+{
+	struct lm78_data *data = lm78_update_device(dev);
+	return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan[nr],
+		DIV_FROM_REG(data->fan_div[nr])) );
+}
+
+static ssize_t show_fan_min(struct device *dev, char *buf, int nr)
+{
+	struct lm78_data *data = lm78_update_device(dev);
+	return sprintf(buf,"%d\n", FAN_FROM_REG(data->fan_min[nr],
+		DIV_FROM_REG(data->fan_div[nr])) );
+}
+
+static ssize_t set_fan_min(struct device *dev, const char *buf,
+		size_t count, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct lm78_data *data = i2c_get_clientdata(client);
+	unsigned long val = simple_strtoul(buf, NULL, 10);
+
+	down(&data->update_lock);
+	data->fan_min[nr] = FAN_TO_REG(val, DIV_FROM_REG(data->fan_div[nr]));
+	lm78_write_value(client, LM78_REG_FAN_MIN(nr), data->fan_min[nr]);
+	up(&data->update_lock);
+	return count;
+}
+
+static ssize_t show_fan_div(struct device *dev, char *buf, int nr)
+{
+	struct lm78_data *data = lm78_update_device(dev);
+	return sprintf(buf, "%d\n", DIV_FROM_REG(data->fan_div[nr]) );
+}
+
+/* Note: we save and restore the fan minimum here, because its value is
+   determined in part by the fan divisor.  This follows the principle of
+   least suprise; the user doesn't expect the fan minimum to change just
+   because the divisor changed. */
+static ssize_t set_fan_div(struct device *dev, const char *buf,
+	size_t count, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct lm78_data *data = i2c_get_clientdata(client);
+	unsigned long val = simple_strtoul(buf, NULL, 10);
+	unsigned long min;
+	u8 reg;
+
+	down(&data->update_lock);
+	min = FAN_FROM_REG(data->fan_min[nr],
+			   DIV_FROM_REG(data->fan_div[nr]));
+
+	switch (val) {
+	case 1: data->fan_div[nr] = 0; break;
+	case 2: data->fan_div[nr] = 1; break;
+	case 4: data->fan_div[nr] = 2; break;
+	case 8: data->fan_div[nr] = 3; break;
+	default:
+		dev_err(&client->dev, "fan_div value %ld not "
+			"supported. Choose one of 1, 2, 4 or 8!\n", val);
+		up(&data->update_lock);
+		return -EINVAL;
+	}
+
+	reg = lm78_read_value(client, LM78_REG_VID_FANDIV);
+	switch (nr) {
+	case 0:
+		reg = (reg & 0xcf) | (data->fan_div[nr] << 4);
+		break;
+	case 1:
+		reg = (reg & 0x3f) | (data->fan_div[nr] << 6);
+		break;
+	}
+	lm78_write_value(client, LM78_REG_VID_FANDIV, reg);
+
+	data->fan_min[nr] =
+		FAN_TO_REG(min, DIV_FROM_REG(data->fan_div[nr]));
+	lm78_write_value(client, LM78_REG_FAN_MIN(nr), data->fan_min[nr]);
+	up(&data->update_lock);
+
+	return count;
+}
+
+#define show_fan_offset(offset)						\
+static ssize_t show_fan_##offset (struct device *dev, char *buf)	\
+{									\
+	return show_fan(dev, buf, offset - 1);				\
+}									\
+static ssize_t show_fan_##offset##_min (struct device *dev, char *buf)  \
+{									\
+	return show_fan_min(dev, buf, offset - 1);			\
+}									\
+static ssize_t show_fan_##offset##_div (struct device *dev, char *buf)  \
+{									\
+	return show_fan_div(dev, buf, offset - 1);			\
+}									\
+static ssize_t set_fan_##offset##_min (struct device *dev,		\
+		const char *buf, size_t count)				\
+{									\
+	return set_fan_min(dev, buf, count, offset - 1);		\
+}									\
+static DEVICE_ATTR(fan##offset##_input, S_IRUGO, show_fan_##offset, NULL);\
+static DEVICE_ATTR(fan##offset##_min, S_IRUGO | S_IWUSR,		\
+		show_fan_##offset##_min, set_fan_##offset##_min);
+
+static ssize_t set_fan_1_div(struct device *dev, const char *buf,
+		size_t count)
+{
+	return set_fan_div(dev, buf, count, 0) ;
+}
+
+static ssize_t set_fan_2_div(struct device *dev, const char *buf,
+		size_t count)
+{
+	return set_fan_div(dev, buf, count, 1) ;
+}
+
+show_fan_offset(1);
+show_fan_offset(2);
+show_fan_offset(3);
+
+/* Fan 3 divisor is locked in H/W */
+static DEVICE_ATTR(fan1_div, S_IRUGO | S_IWUSR,
+		show_fan_1_div, set_fan_1_div);
+static DEVICE_ATTR(fan2_div, S_IRUGO | S_IWUSR,
+		show_fan_2_div, set_fan_2_div);
+static DEVICE_ATTR(fan3_div, S_IRUGO, show_fan_3_div, NULL);
+
+/* VID */
+static ssize_t show_vid(struct device *dev, char *buf)
+{
+	struct lm78_data *data = lm78_update_device(dev);
+	return sprintf(buf, "%d\n", VID_FROM_REG(data->vid));
+}
+static DEVICE_ATTR(cpu0_vid, S_IRUGO, show_vid, NULL);
+
+/* Alarms */
+static ssize_t show_alarms(struct device *dev, char *buf)
+{
+	struct lm78_data *data = lm78_update_device(dev);
+	return sprintf(buf, "%u\n", data->alarms);
+}
+static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL);
+
+/* This function is called when:
+     * lm78_driver is inserted (when this module is loaded), for each
+       available adapter
+     * when a new adapter is inserted (and lm78_driver is still present) */
+static int lm78_attach_adapter(struct i2c_adapter *adapter)
+{
+	if (!(adapter->class & I2C_CLASS_HWMON))
+		return 0;
+	return i2c_detect(adapter, &addr_data, lm78_detect);
+}
+
+/* This function is called by i2c_detect */
+int lm78_detect(struct i2c_adapter *adapter, int address, int kind)
+{
+	int i, err;
+	struct i2c_client *new_client;
+	struct lm78_data *data;
+	const char *client_name = "";
+	int is_isa = i2c_is_isa_adapter(adapter);
+
+	if (!is_isa &&
+	    !i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) {
+		err = -ENODEV;
+		goto ERROR0;
+	}
+
+	/* Reserve the ISA region */
+	if (is_isa)
+		if (!request_region(address, LM78_EXTENT, lm78_driver.name)) {
+			err = -EBUSY;
+			goto ERROR0;
+		}
+
+	/* Probe whether there is anything available on this address. Already
+	   done for SMBus clients */
+	if (kind < 0) {
+		if (is_isa) {
+
+#define REALLY_SLOW_IO
+			/* We need the timeouts for at least some LM78-like
+			   chips. But only if we read 'undefined' registers. */
+			i = inb_p(address + 1);
+			if (inb_p(address + 2) != i) {
+				err = -ENODEV;
+				goto ERROR1;
+			}
+			if (inb_p(address + 3) != i) {
+				err = -ENODEV;
+				goto ERROR1;
+			}
+			if (inb_p(address + 7) != i) {
+				err = -ENODEV;
+				goto ERROR1;
+			}
+#undef REALLY_SLOW_IO
+
+			/* Let's just hope nothing breaks here */
+			i = inb_p(address + 5) & 0x7f;
+			outb_p(~i & 0x7f, address + 5);
+			if ((inb_p(address + 5) & 0x7f) != (~i & 0x7f)) {
+				outb_p(i, address + 5);
+				err = -ENODEV;
+				goto ERROR1;
+			}
+		}
+	}
+
+	/* OK. For now, we presume we have a valid client. We now create the
+	   client structure, even though we cannot fill it completely yet.
+	   But it allows us to access lm78_{read,write}_value. */
+
+	if (!(data = kmalloc(sizeof(struct lm78_data), GFP_KERNEL))) {
+		err = -ENOMEM;
+		goto ERROR1;
+	}
+	memset(data, 0, sizeof(struct lm78_data));
+
+	new_client = &data->client;
+	if (is_isa)
+		init_MUTEX(&data->lock);
+	i2c_set_clientdata(new_client, data);
+	new_client->addr = address;
+	new_client->adapter = adapter;
+	new_client->driver = &lm78_driver;
+	new_client->flags = 0;
+
+	/* Now, we do the remaining detection. */
+	if (kind < 0) {
+		if (lm78_read_value(new_client, LM78_REG_CONFIG) & 0x80) {
+			err = -ENODEV;
+			goto ERROR2;
+		}
+		if (!is_isa && (lm78_read_value(
+				new_client, LM78_REG_I2C_ADDR) != address)) {
+			err = -ENODEV;
+			goto ERROR2;
+		}
+	}
+
+	/* Determine the chip type. */
+	if (kind <= 0) {
+		i = lm78_read_value(new_client, LM78_REG_CHIPID);
+		if (i == 0x00 || i == 0x20)
+			kind = lm78;
+		else if (i == 0x40)
+			kind = lm78j;
+		else if ((i & 0xfe) == 0xc0)
+			kind = lm79;
+		else {
+			if (kind == 0)
+				dev_warn(&adapter->dev, "Ignoring 'force' "
+					"parameter for unknown chip at "
+					"adapter %d, address 0x%02x\n",
+					i2c_adapter_id(adapter), address);
+			err = -ENODEV;
+			goto ERROR2;
+		}
+	}
+
+	if (kind == lm78) {
+		client_name = "lm78";
+	} else if (kind == lm78j) {
+		client_name = "lm78-j";
+	} else if (kind == lm79) {
+		client_name = "lm79";
+	}
+
+	/* Fill in the remaining client fields and put into the global list */
+	strlcpy(new_client->name, client_name, I2C_NAME_SIZE);
+	data->type = kind;
+
+	data->valid = 0;
+	init_MUTEX(&data->update_lock);
+
+	/* Tell the I2C layer a new client has arrived */
+	if ((err = i2c_attach_client(new_client)))
+		goto ERROR2;
+
+	/* Initialize the LM78 chip */
+	lm78_init_client(new_client);
+
+	/* A few vars need to be filled upon startup */
+	for (i = 0; i < 3; i++) {
+		data->fan_min[i] = lm78_read_value(new_client,
+					LM78_REG_FAN_MIN(i));
+	}
+
+	/* Register sysfs hooks */
+	device_create_file(&new_client->dev, &dev_attr_in0_input);
+	device_create_file(&new_client->dev, &dev_attr_in0_min);
+	device_create_file(&new_client->dev, &dev_attr_in0_max);
+	device_create_file(&new_client->dev, &dev_attr_in1_input);
+	device_create_file(&new_client->dev, &dev_attr_in1_min);
+	device_create_file(&new_client->dev, &dev_attr_in1_max);
+	device_create_file(&new_client->dev, &dev_attr_in2_input);
+	device_create_file(&new_client->dev, &dev_attr_in2_min);
+	device_create_file(&new_client->dev, &dev_attr_in2_max);
+	device_create_file(&new_client->dev, &dev_attr_in3_input);
+	device_create_file(&new_client->dev, &dev_attr_in3_min);
+	device_create_file(&new_client->dev, &dev_attr_in3_max);
+	device_create_file(&new_client->dev, &dev_attr_in4_input);
+	device_create_file(&new_client->dev, &dev_attr_in4_min);
+	device_create_file(&new_client->dev, &dev_attr_in4_max);
+	device_create_file(&new_client->dev, &dev_attr_in5_input);
+	device_create_file(&new_client->dev, &dev_attr_in5_min);
+	device_create_file(&new_client->dev, &dev_attr_in5_max);
+	device_create_file(&new_client->dev, &dev_attr_in6_input);
+	device_create_file(&new_client->dev, &dev_attr_in6_min);
+	device_create_file(&new_client->dev, &dev_attr_in6_max);
+	device_create_file(&new_client->dev, &dev_attr_temp1_input);
+	device_create_file(&new_client->dev, &dev_attr_temp1_max);
+	device_create_file(&new_client->dev, &dev_attr_temp1_max_hyst);
+	device_create_file(&new_client->dev, &dev_attr_fan1_input);
+	device_create_file(&new_client->dev, &dev_attr_fan1_min);
+	device_create_file(&new_client->dev, &dev_attr_fan1_div);
+	device_create_file(&new_client->dev, &dev_attr_fan2_input);
+	device_create_file(&new_client->dev, &dev_attr_fan2_min);
+	device_create_file(&new_client->dev, &dev_attr_fan2_div);
+	device_create_file(&new_client->dev, &dev_attr_fan3_input);
+	device_create_file(&new_client->dev, &dev_attr_fan3_min);
+	device_create_file(&new_client->dev, &dev_attr_fan3_div);
+	device_create_file(&new_client->dev, &dev_attr_alarms);
+	device_create_file(&new_client->dev, &dev_attr_cpu0_vid);
+
+	return 0;
+
+ERROR2:
+	kfree(data);
+ERROR1:
+	if (is_isa)
+		release_region(address, LM78_EXTENT);
+ERROR0:
+	return err;
+}
+
+static int lm78_detach_client(struct i2c_client *client)
+{
+	int err;
+
+	if ((err = i2c_detach_client(client))) {
+		dev_err(&client->dev,
+		    "Client deregistration failed, client not detached.\n");
+		return err;
+	}
+
+	if(i2c_is_isa_client(client))
+		release_region(client->addr, LM78_EXTENT);
+
+	kfree(i2c_get_clientdata(client));
+
+	return 0;
+}
+
+/* The SMBus locks itself, but ISA access must be locked explicitely! 
+   We don't want to lock the whole ISA bus, so we lock each client
+   separately.
+   We ignore the LM78 BUSY flag at this moment - it could lead to deadlocks,
+   would slow down the LM78 access and should not be necessary.  */
+static int lm78_read_value(struct i2c_client *client, u8 reg)
+{
+	int res;
+	if (i2c_is_isa_client(client)) {
+		struct lm78_data *data = i2c_get_clientdata(client);
+		down(&data->lock);
+		outb_p(reg, client->addr + LM78_ADDR_REG_OFFSET);
+		res = inb_p(client->addr + LM78_DATA_REG_OFFSET);
+		up(&data->lock);
+		return res;
+	} else
+		return i2c_smbus_read_byte_data(client, reg);
+}
+
+/* The SMBus locks itself, but ISA access muse be locked explicitely! 
+   We don't want to lock the whole ISA bus, so we lock each client
+   separately.
+   We ignore the LM78 BUSY flag at this moment - it could lead to deadlocks,
+   would slow down the LM78 access and should not be necessary. 
+   There are some ugly typecasts here, but the good new is - they should
+   nowhere else be necessary! */
+static int lm78_write_value(struct i2c_client *client, u8 reg, u8 value)
+{
+	if (i2c_is_isa_client(client)) {
+		struct lm78_data *data = i2c_get_clientdata(client);
+		down(&data->lock);
+		outb_p(reg, client->addr + LM78_ADDR_REG_OFFSET);
+		outb_p(value, client->addr + LM78_DATA_REG_OFFSET);
+		up(&data->lock);
+		return 0;
+	} else
+		return i2c_smbus_write_byte_data(client, reg, value);
+}
+
+/* Called when we have found a new LM78. It should set limits, etc. */
+static void lm78_init_client(struct i2c_client *client)
+{
+	u8 config = lm78_read_value(client, LM78_REG_CONFIG);
+
+	/* Start monitoring */
+	if (!(config & 0x01))
+		lm78_write_value(client, LM78_REG_CONFIG,
+				 (config & 0xf7) | 0x01);
+}
+
+static struct lm78_data *lm78_update_device(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct lm78_data *data = i2c_get_clientdata(client);
+	int i;
+
+	down(&data->update_lock);
+
+	if (time_after(jiffies, data->last_updated + HZ + HZ / 2)
+	    || !data->valid) {
+
+		dev_dbg(&client->dev, "Starting lm78 update\n");
+
+		for (i = 0; i <= 6; i++) {
+			data->in[i] =
+			    lm78_read_value(client, LM78_REG_IN(i));
+			data->in_min[i] =
+			    lm78_read_value(client, LM78_REG_IN_MIN(i));
+			data->in_max[i] =
+			    lm78_read_value(client, LM78_REG_IN_MAX(i));
+		}
+		for (i = 0; i < 3; i++) {
+			data->fan[i] =
+			    lm78_read_value(client, LM78_REG_FAN(i));
+			data->fan_min[i] =
+			    lm78_read_value(client, LM78_REG_FAN_MIN(i));
+		}
+		data->temp = lm78_read_value(client, LM78_REG_TEMP);
+		data->temp_over =
+		    lm78_read_value(client, LM78_REG_TEMP_OVER);
+		data->temp_hyst =
+		    lm78_read_value(client, LM78_REG_TEMP_HYST);
+		i = lm78_read_value(client, LM78_REG_VID_FANDIV);
+		data->vid = i & 0x0f;
+		if (data->type == lm79)
+			data->vid |=
+			    (lm78_read_value(client, LM78_REG_CHIPID) &
+			     0x01) << 4;
+		else
+			data->vid |= 0x10;
+		data->fan_div[0] = (i >> 4) & 0x03;
+		data->fan_div[1] = i >> 6;
+		data->alarms = lm78_read_value(client, LM78_REG_ALARM1) +
+		    (lm78_read_value(client, LM78_REG_ALARM2) << 8);
+		data->last_updated = jiffies;
+		data->valid = 1;
+
+		data->fan_div[2] = 1;
+	}
+
+	up(&data->update_lock);
+
+	return data;
+}
+
+static int __init sm_lm78_init(void)
+{
+	return i2c_add_driver(&lm78_driver);
+}
+
+static void __exit sm_lm78_exit(void)
+{
+	i2c_del_driver(&lm78_driver);
+}
+
+
+
+MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl>");
+MODULE_DESCRIPTION("LM78, LM78-J and LM79 driver");
+MODULE_LICENSE("GPL");
+
+module_init(sm_lm78_init);
+module_exit(sm_lm78_exit);
diff --git a/drivers/i2c/chips/lm80.c b/drivers/i2c/chips/lm80.c
new file mode 100644
index 00000000000..a72f431971b
--- /dev/null
+++ b/drivers/i2c/chips/lm80.c
@@ -0,0 +1,602 @@
+/*
+ * lm80.c - From lm_sensors, Linux kernel modules for hardware
+ * monitoring
+ * Copyright (C) 1998, 1999  Frodo Looijaard <frodol@dds.nl>
+ * and Philip Edelbrock <phil@netroedge.com>
+ *
+ * Ported to Linux 2.6 by Tiago Sousa <mirage@kaotik.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/jiffies.h>
+#include <linux/i2c.h>
+#include <linux/i2c-sensor.h>
+
+/* Addresses to scan */
+static unsigned short normal_i2c[] = { 0x28, 0x29, 0x2a, 0x2b, 0x2c,
+					0x2d, 0x2e, 0x2f, I2C_CLIENT_END };
+static unsigned int normal_isa[] = { I2C_CLIENT_ISA_END };
+
+/* Insmod parameters */
+SENSORS_INSMOD_1(lm80);
+
+/* Many LM80 constants specified below */
+
+/* The LM80 registers */
+#define LM80_REG_IN_MAX(nr)		(0x2a + (nr) * 2)
+#define LM80_REG_IN_MIN(nr)		(0x2b + (nr) * 2)
+#define LM80_REG_IN(nr)			(0x20 + (nr))
+
+#define LM80_REG_FAN1			0x28
+#define LM80_REG_FAN2			0x29
+#define LM80_REG_FAN_MIN(nr)		(0x3b + (nr))
+
+#define LM80_REG_TEMP			0x27
+#define LM80_REG_TEMP_HOT_MAX		0x38
+#define LM80_REG_TEMP_HOT_HYST		0x39
+#define LM80_REG_TEMP_OS_MAX		0x3a
+#define LM80_REG_TEMP_OS_HYST		0x3b
+
+#define LM80_REG_CONFIG			0x00
+#define LM80_REG_ALARM1			0x01
+#define LM80_REG_ALARM2			0x02
+#define LM80_REG_MASK1			0x03
+#define LM80_REG_MASK2			0x04
+#define LM80_REG_FANDIV			0x05
+#define LM80_REG_RES			0x06
+
+
+/* Conversions. Rounding and limit checking is only done on the TO_REG
+   variants. Note that you should be a bit careful with which arguments
+   these macros are called: arguments may be evaluated more than once.
+   Fixing this is just not worth it. */
+
+#define IN_TO_REG(val)		(SENSORS_LIMIT(((val)+5)/10,0,255))
+#define IN_FROM_REG(val)	((val)*10)
+
+static inline unsigned char FAN_TO_REG(unsigned rpm, unsigned div)
+{
+	if (rpm == 0)
+		return 255;
+	rpm = SENSORS_LIMIT(rpm, 1, 1000000);
+	return SENSORS_LIMIT((1350000 + rpm*div / 2) / (rpm*div), 1, 254);
+}
+
+#define FAN_FROM_REG(val,div)	((val)==0?-1:\
+				(val)==255?0:1350000/((div)*(val)))
+
+static inline long TEMP_FROM_REG(u16 temp)
+{
+	long res;
+
+	temp >>= 4;
+	if (temp < 0x0800)
+		res = 625 * (long) temp;
+	else
+		res = ((long) temp - 0x01000) * 625;
+
+	return res / 10;
+}
+
+#define TEMP_LIMIT_FROM_REG(val)	(((val)>0x80?(val)-0x100:(val))*1000)
+
+#define TEMP_LIMIT_TO_REG(val)		SENSORS_LIMIT((val)<0?\
+					((val)-500)/1000:((val)+500)/1000,0,255)
+
+#define DIV_FROM_REG(val)		(1 << (val))
+
+/*
+ * Client data (each client gets its own)
+ */
+
+struct lm80_data {
+	struct i2c_client client;
+	struct semaphore update_lock;
+	char valid;		/* !=0 if following fields are valid */
+	unsigned long last_updated;	/* In jiffies */
+
+	u8 in[7];		/* Register value */
+	u8 in_max[7];		/* Register value */
+	u8 in_min[7];		/* Register value */
+	u8 fan[2];		/* Register value */
+	u8 fan_min[2];		/* Register value */
+	u8 fan_div[2];		/* Register encoding, shifted right */
+	u16 temp;		/* Register values, shifted right */
+	u8 temp_hot_max;	/* Register value */
+	u8 temp_hot_hyst;	/* Register value */
+	u8 temp_os_max;		/* Register value */
+	u8 temp_os_hyst;	/* Register value */
+	u16 alarms;		/* Register encoding, combined */
+};
+
+/* 
+ * Functions declaration
+ */
+
+static int lm80_attach_adapter(struct i2c_adapter *adapter);
+static int lm80_detect(struct i2c_adapter *adapter, int address, int kind);
+static void lm80_init_client(struct i2c_client *client);
+static int lm80_detach_client(struct i2c_client *client);
+static struct lm80_data *lm80_update_device(struct device *dev);
+static int lm80_read_value(struct i2c_client *client, u8 reg);
+static int lm80_write_value(struct i2c_client *client, u8 reg, u8 value);
+
+/*
+ * Driver data (common to all clients)
+ */
+
+static struct i2c_driver lm80_driver = {
+	.owner		= THIS_MODULE,
+	.name		= "lm80",
+	.id		= I2C_DRIVERID_LM80,
+	.flags		= I2C_DF_NOTIFY,
+	.attach_adapter	= lm80_attach_adapter,
+	.detach_client	= lm80_detach_client,
+};
+
+/*
+ * Sysfs stuff
+ */
+
+#define show_in(suffix, value) \
+static ssize_t show_in_##suffix(struct device *dev, char *buf) \
+{ \
+	struct lm80_data *data = lm80_update_device(dev); \
+	return sprintf(buf, "%d\n", IN_FROM_REG(data->value)); \
+}
+show_in(min0, in_min[0]);
+show_in(min1, in_min[1]);
+show_in(min2, in_min[2]);
+show_in(min3, in_min[3]);
+show_in(min4, in_min[4]);
+show_in(min5, in_min[5]);
+show_in(min6, in_min[6]);
+show_in(max0, in_max[0]);
+show_in(max1, in_max[1]);
+show_in(max2, in_max[2]);
+show_in(max3, in_max[3]);
+show_in(max4, in_max[4]);
+show_in(max5, in_max[5]);
+show_in(max6, in_max[6]);
+show_in(input0, in[0]);
+show_in(input1, in[1]);
+show_in(input2, in[2]);
+show_in(input3, in[3]);
+show_in(input4, in[4]);
+show_in(input5, in[5]);
+show_in(input6, in[6]);
+
+#define set_in(suffix, value, reg) \
+static ssize_t set_in_##suffix(struct device *dev, const char *buf, \
+	size_t count) \
+{ \
+	struct i2c_client *client = to_i2c_client(dev); \
+	struct lm80_data *data = i2c_get_clientdata(client); \
+	long val = simple_strtol(buf, NULL, 10); \
+ \
+	down(&data->update_lock);\
+	data->value = IN_TO_REG(val); \
+	lm80_write_value(client, reg, data->value); \
+	up(&data->update_lock);\
+	return count; \
+}
+set_in(min0, in_min[0], LM80_REG_IN_MIN(0));
+set_in(min1, in_min[1], LM80_REG_IN_MIN(1));
+set_in(min2, in_min[2], LM80_REG_IN_MIN(2));
+set_in(min3, in_min[3], LM80_REG_IN_MIN(3));
+set_in(min4, in_min[4], LM80_REG_IN_MIN(4));
+set_in(min5, in_min[5], LM80_REG_IN_MIN(5));
+set_in(min6, in_min[6], LM80_REG_IN_MIN(6));
+set_in(max0, in_max[0], LM80_REG_IN_MAX(0));
+set_in(max1, in_max[1], LM80_REG_IN_MAX(1));
+set_in(max2, in_max[2], LM80_REG_IN_MAX(2));
+set_in(max3, in_max[3], LM80_REG_IN_MAX(3));
+set_in(max4, in_max[4], LM80_REG_IN_MAX(4));
+set_in(max5, in_max[5], LM80_REG_IN_MAX(5));
+set_in(max6, in_max[6], LM80_REG_IN_MAX(6));
+
+#define show_fan(suffix, value, div) \
+static ssize_t show_fan_##suffix(struct device *dev, char *buf) \
+{ \
+	struct lm80_data *data = lm80_update_device(dev); \
+	return sprintf(buf, "%d\n", FAN_FROM_REG(data->value, \
+		       DIV_FROM_REG(data->div))); \
+}
+show_fan(min1, fan_min[0], fan_div[0]);
+show_fan(min2, fan_min[1], fan_div[1]);
+show_fan(input1, fan[0], fan_div[0]);
+show_fan(input2, fan[1], fan_div[1]);
+
+#define show_fan_div(suffix, value) \
+static ssize_t show_fan_div##suffix(struct device *dev, char *buf) \
+{ \
+	struct lm80_data *data = lm80_update_device(dev); \
+	return sprintf(buf, "%d\n", DIV_FROM_REG(data->value)); \
+}
+show_fan_div(1, fan_div[0]);
+show_fan_div(2, fan_div[1]);
+
+#define set_fan(suffix, value, reg, div) \
+static ssize_t set_fan_##suffix(struct device *dev, const char *buf, \
+	size_t count) \
+{ \
+	struct i2c_client *client = to_i2c_client(dev); \
+	struct lm80_data *data = i2c_get_clientdata(client); \
+	long val = simple_strtoul(buf, NULL, 10); \
+ \
+	down(&data->update_lock);\
+	data->value = FAN_TO_REG(val, DIV_FROM_REG(data->div)); \
+	lm80_write_value(client, reg, data->value); \
+	up(&data->update_lock);\
+	return count; \
+}
+set_fan(min1, fan_min[0], LM80_REG_FAN_MIN(1), fan_div[0]);
+set_fan(min2, fan_min[1], LM80_REG_FAN_MIN(2), fan_div[1]);
+
+/* Note: we save and restore the fan minimum here, because its value is
+   determined in part by the fan divisor.  This follows the principle of
+   least suprise; the user doesn't expect the fan minimum to change just
+   because the divisor changed. */
+static ssize_t set_fan_div(struct device *dev, const char *buf,
+	size_t count, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct lm80_data *data = i2c_get_clientdata(client);
+	unsigned long min, val = simple_strtoul(buf, NULL, 10);
+	u8 reg;
+
+	/* Save fan_min */
+	down(&data->update_lock);
+	min = FAN_FROM_REG(data->fan_min[nr],
+			   DIV_FROM_REG(data->fan_div[nr]));
+
+	switch (val) {
+	case 1: data->fan_div[nr] = 0; break;
+	case 2: data->fan_div[nr] = 1; break;
+	case 4: data->fan_div[nr] = 2; break;
+	case 8: data->fan_div[nr] = 3; break;
+	default:
+		dev_err(&client->dev, "fan_div value %ld not "
+			"supported. Choose one of 1, 2, 4 or 8!\n", val);
+		up(&data->update_lock);
+		return -EINVAL;
+	}
+
+	reg = (lm80_read_value(client, LM80_REG_FANDIV) & ~(3 << (2 * (nr + 1))))
+	    | (data->fan_div[nr] << (2 * (nr + 1)));
+	lm80_write_value(client, LM80_REG_FANDIV, reg);
+
+	/* Restore fan_min */
+	data->fan_min[nr] = FAN_TO_REG(min, DIV_FROM_REG(data->fan_div[nr]));
+	lm80_write_value(client, LM80_REG_FAN_MIN(nr + 1), data->fan_min[nr]);
+	up(&data->update_lock);
+
+	return count;
+}
+
+#define set_fan_div(number) \
+static ssize_t set_fan_div##number(struct device *dev, const char *buf, \
+	size_t count) \
+{ \
+	return set_fan_div(dev, buf, count, number - 1); \
+}
+set_fan_div(1);
+set_fan_div(2);
+
+static ssize_t show_temp_input1(struct device *dev, char *buf)
+{
+	struct lm80_data *data = lm80_update_device(dev);
+	return sprintf(buf, "%ld\n", TEMP_FROM_REG(data->temp));
+}
+
+#define show_temp(suffix, value) \
+static ssize_t show_temp_##suffix(struct device *dev, char *buf) \
+{ \
+	struct lm80_data *data = lm80_update_device(dev); \
+	return sprintf(buf, "%d\n", TEMP_LIMIT_FROM_REG(data->value)); \
+}
+show_temp(hot_max, temp_hot_max);
+show_temp(hot_hyst, temp_hot_hyst);
+show_temp(os_max, temp_os_max);
+show_temp(os_hyst, temp_os_hyst);
+
+#define set_temp(suffix, value, reg) \
+static ssize_t set_temp_##suffix(struct device *dev, const char *buf, \
+	size_t count) \
+{ \
+	struct i2c_client *client = to_i2c_client(dev); \
+	struct lm80_data *data = i2c_get_clientdata(client); \
+	long val = simple_strtoul(buf, NULL, 10); \
+ \
+	down(&data->update_lock); \
+	data->value = TEMP_LIMIT_TO_REG(val); \
+	lm80_write_value(client, reg, data->value); \
+	up(&data->update_lock); \
+	return count; \
+}
+set_temp(hot_max, temp_hot_max, LM80_REG_TEMP_HOT_MAX);
+set_temp(hot_hyst, temp_hot_hyst, LM80_REG_TEMP_HOT_HYST);
+set_temp(os_max, temp_os_max, LM80_REG_TEMP_OS_MAX);
+set_temp(os_hyst, temp_os_hyst, LM80_REG_TEMP_OS_HYST);
+
+static ssize_t show_alarms(struct device *dev, char *buf)
+{
+	struct lm80_data *data = lm80_update_device(dev);
+	return sprintf(buf, "%u\n", data->alarms);
+}
+
+static DEVICE_ATTR(in0_min, S_IWUSR | S_IRUGO, show_in_min0, set_in_min0);
+static DEVICE_ATTR(in1_min, S_IWUSR | S_IRUGO, show_in_min1, set_in_min1);
+static DEVICE_ATTR(in2_min, S_IWUSR | S_IRUGO, show_in_min2, set_in_min2);
+static DEVICE_ATTR(in3_min, S_IWUSR | S_IRUGO, show_in_min3, set_in_min3);
+static DEVICE_ATTR(in4_min, S_IWUSR | S_IRUGO, show_in_min4, set_in_min4);
+static DEVICE_ATTR(in5_min, S_IWUSR | S_IRUGO, show_in_min5, set_in_min5);
+static DEVICE_ATTR(in6_min, S_IWUSR | S_IRUGO, show_in_min6, set_in_min6);
+static DEVICE_ATTR(in0_max, S_IWUSR | S_IRUGO, show_in_max0, set_in_max0);
+static DEVICE_ATTR(in1_max, S_IWUSR | S_IRUGO, show_in_max1, set_in_max1);
+static DEVICE_ATTR(in2_max, S_IWUSR | S_IRUGO, show_in_max2, set_in_max2);
+static DEVICE_ATTR(in3_max, S_IWUSR | S_IRUGO, show_in_max3, set_in_max3);
+static DEVICE_ATTR(in4_max, S_IWUSR | S_IRUGO, show_in_max4, set_in_max4);
+static DEVICE_ATTR(in5_max, S_IWUSR | S_IRUGO, show_in_max5, set_in_max5);
+static DEVICE_ATTR(in6_max, S_IWUSR | S_IRUGO, show_in_max6, set_in_max6);
+static DEVICE_ATTR(in0_input, S_IRUGO, show_in_input0, NULL);
+static DEVICE_ATTR(in1_input, S_IRUGO, show_in_input1, NULL);
+static DEVICE_ATTR(in2_input, S_IRUGO, show_in_input2, NULL);
+static DEVICE_ATTR(in3_input, S_IRUGO, show_in_input3, NULL);
+static DEVICE_ATTR(in4_input, S_IRUGO, show_in_input4, NULL);
+static DEVICE_ATTR(in5_input, S_IRUGO, show_in_input5, NULL);
+static DEVICE_ATTR(in6_input, S_IRUGO, show_in_input6, NULL);
+static DEVICE_ATTR(fan1_min, S_IWUSR | S_IRUGO, show_fan_min1,
+    set_fan_min1);
+static DEVICE_ATTR(fan2_min, S_IWUSR | S_IRUGO, show_fan_min2,
+    set_fan_min2);
+static DEVICE_ATTR(fan1_input, S_IRUGO, show_fan_input1, NULL);
+static DEVICE_ATTR(fan2_input, S_IRUGO, show_fan_input2, NULL);
+static DEVICE_ATTR(fan1_div, S_IWUSR | S_IRUGO, show_fan_div1, set_fan_div1);
+static DEVICE_ATTR(fan2_div, S_IWUSR | S_IRUGO, show_fan_div2, set_fan_div2);
+static DEVICE_ATTR(temp1_input, S_IRUGO, show_temp_input1, NULL);
+static DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO, show_temp_hot_max,
+    set_temp_hot_max);
+static DEVICE_ATTR(temp1_max_hyst, S_IWUSR | S_IRUGO, show_temp_hot_hyst,
+    set_temp_hot_hyst);
+static DEVICE_ATTR(temp1_crit, S_IWUSR | S_IRUGO, show_temp_os_max,
+    set_temp_os_max);
+static DEVICE_ATTR(temp1_crit_hyst, S_IWUSR | S_IRUGO, show_temp_os_hyst,
+    set_temp_os_hyst);
+static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL);
+
+/*
+ * Real code
+ */
+
+static int lm80_attach_adapter(struct i2c_adapter *adapter)
+{
+	if (!(adapter->class & I2C_CLASS_HWMON))
+		return 0;
+	return i2c_detect(adapter, &addr_data, lm80_detect);
+}
+
+int lm80_detect(struct i2c_adapter *adapter, int address, int kind)
+{
+	int i, cur;
+	struct i2c_client *new_client;
+	struct lm80_data *data;
+	int err = 0;
+	const char *name;
+
+	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
+		goto exit;
+
+	/* OK. For now, we presume we have a valid client. We now create the
+	   client structure, even though we cannot fill it completely yet.
+	   But it allows us to access lm80_{read,write}_value. */
+	if (!(data = kmalloc(sizeof(struct lm80_data), GFP_KERNEL))) {
+		err = -ENOMEM;
+		goto exit;
+	}
+	memset(data, 0, sizeof(struct lm80_data));
+
+	new_client = &data->client;
+	i2c_set_clientdata(new_client, data);
+	new_client->addr = address;
+	new_client->adapter = adapter;
+	new_client->driver = &lm80_driver;
+	new_client->flags = 0;
+
+	/* Now, we do the remaining detection. It is lousy. */
+	if (lm80_read_value(new_client, LM80_REG_ALARM2) & 0xc0)
+		goto error_free;
+	for (i = 0x2a; i <= 0x3d; i++) {
+		cur = i2c_smbus_read_byte_data(new_client, i);
+		if ((i2c_smbus_read_byte_data(new_client, i + 0x40) != cur)
+		 || (i2c_smbus_read_byte_data(new_client, i + 0x80) != cur)
+		 || (i2c_smbus_read_byte_data(new_client, i + 0xc0) != cur))
+		    goto error_free;
+	}
+
+	/* Determine the chip type - only one kind supported! */
+	kind = lm80;
+	name = "lm80";
+
+	/* Fill in the remaining client fields and put it into the global list */
+	strlcpy(new_client->name, name, I2C_NAME_SIZE);
+	data->valid = 0;
+	init_MUTEX(&data->update_lock);
+
+	/* Tell the I2C layer a new client has arrived */
+	if ((err = i2c_attach_client(new_client)))
+		goto error_free;
+
+	/* Initialize the LM80 chip */
+	lm80_init_client(new_client);
+
+	/* A few vars need to be filled upon startup */
+	data->fan_min[0] = lm80_read_value(new_client, LM80_REG_FAN_MIN(1));
+	data->fan_min[1] = lm80_read_value(new_client, LM80_REG_FAN_MIN(2));
+
+	/* Register sysfs hooks */
+	device_create_file(&new_client->dev, &dev_attr_in0_min);
+	device_create_file(&new_client->dev, &dev_attr_in1_min);
+	device_create_file(&new_client->dev, &dev_attr_in2_min);
+	device_create_file(&new_client->dev, &dev_attr_in3_min);
+	device_create_file(&new_client->dev, &dev_attr_in4_min);
+	device_create_file(&new_client->dev, &dev_attr_in5_min);
+	device_create_file(&new_client->dev, &dev_attr_in6_min);
+	device_create_file(&new_client->dev, &dev_attr_in0_max);
+	device_create_file(&new_client->dev, &dev_attr_in1_max);
+	device_create_file(&new_client->dev, &dev_attr_in2_max);
+	device_create_file(&new_client->dev, &dev_attr_in3_max);
+	device_create_file(&new_client->dev, &dev_attr_in4_max);
+	device_create_file(&new_client->dev, &dev_attr_in5_max);
+	device_create_file(&new_client->dev, &dev_attr_in6_max);
+	device_create_file(&new_client->dev, &dev_attr_in0_input);
+	device_create_file(&new_client->dev, &dev_attr_in1_input);
+	device_create_file(&new_client->dev, &dev_attr_in2_input);
+	device_create_file(&new_client->dev, &dev_attr_in3_input);
+	device_create_file(&new_client->dev, &dev_attr_in4_input);
+	device_create_file(&new_client->dev, &dev_attr_in5_input);
+	device_create_file(&new_client->dev, &dev_attr_in6_input);
+	device_create_file(&new_client->dev, &dev_attr_fan1_min);
+	device_create_file(&new_client->dev, &dev_attr_fan2_min);
+	device_create_file(&new_client->dev, &dev_attr_fan1_input);
+	device_create_file(&new_client->dev, &dev_attr_fan2_input);
+	device_create_file(&new_client->dev, &dev_attr_fan1_div);
+	device_create_file(&new_client->dev, &dev_attr_fan2_div);
+	device_create_file(&new_client->dev, &dev_attr_temp1_input);
+	device_create_file(&new_client->dev, &dev_attr_temp1_max);
+	device_create_file(&new_client->dev, &dev_attr_temp1_max_hyst);
+	device_create_file(&new_client->dev, &dev_attr_temp1_crit);
+	device_create_file(&new_client->dev, &dev_attr_temp1_crit_hyst);
+	device_create_file(&new_client->dev, &dev_attr_alarms);
+
+	return 0;
+
+error_free:
+	kfree(data);
+exit:
+	return err;
+}
+
+static int lm80_detach_client(struct i2c_client *client)
+{
+	int err;
+
+	if ((err = i2c_detach_client(client))) {
+		dev_err(&client->dev, "Client deregistration failed, "
+			"client not detached.\n");
+		return err;
+	}
+
+	kfree(i2c_get_clientdata(client));
+	return 0;
+}
+
+static int lm80_read_value(struct i2c_client *client, u8 reg)
+{
+	return i2c_smbus_read_byte_data(client, reg);
+}
+
+static int lm80_write_value(struct i2c_client *client, u8 reg, u8 value)
+{
+	return i2c_smbus_write_byte_data(client, reg, value);
+}
+
+/* Called when we have found a new LM80. */
+static void lm80_init_client(struct i2c_client *client)
+{
+	/* Reset all except Watchdog values and last conversion values
+	   This sets fan-divs to 2, among others. This makes most other
+	   initializations unnecessary */
+	lm80_write_value(client, LM80_REG_CONFIG, 0x80);
+	/* Set 11-bit temperature resolution */
+	lm80_write_value(client, LM80_REG_RES, 0x08);
+
+	/* Start monitoring */
+	lm80_write_value(client, LM80_REG_CONFIG, 0x01);
+}
+
+static struct lm80_data *lm80_update_device(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct lm80_data *data = i2c_get_clientdata(client);
+	int i;
+
+	down(&data->update_lock);
+
+	if (time_after(jiffies, data->last_updated + 2 * HZ) || !data->valid) {
+		dev_dbg(&client->dev, "Starting lm80 update\n");
+		for (i = 0; i <= 6; i++) {
+			data->in[i] =
+			    lm80_read_value(client, LM80_REG_IN(i));
+			data->in_min[i] =
+			    lm80_read_value(client, LM80_REG_IN_MIN(i));
+			data->in_max[i] =
+			    lm80_read_value(client, LM80_REG_IN_MAX(i));
+		}
+		data->fan[0] = lm80_read_value(client, LM80_REG_FAN1);
+		data->fan_min[0] =
+		    lm80_read_value(client, LM80_REG_FAN_MIN(1));
+		data->fan[1] = lm80_read_value(client, LM80_REG_FAN2);
+		data->fan_min[1] =
+		    lm80_read_value(client, LM80_REG_FAN_MIN(2));
+
+		data->temp =
+		    (lm80_read_value(client, LM80_REG_TEMP) << 8) |
+		    (lm80_read_value(client, LM80_REG_RES) & 0xf0);
+		data->temp_os_max =
+		    lm80_read_value(client, LM80_REG_TEMP_OS_MAX);
+		data->temp_os_hyst =
+		    lm80_read_value(client, LM80_REG_TEMP_OS_HYST);
+		data->temp_hot_max =
+		    lm80_read_value(client, LM80_REG_TEMP_HOT_MAX);
+		data->temp_hot_hyst =
+		    lm80_read_value(client, LM80_REG_TEMP_HOT_HYST);
+
+		i = lm80_read_value(client, LM80_REG_FANDIV);
+		data->fan_div[0] = (i >> 2) & 0x03;
+		data->fan_div[1] = (i >> 4) & 0x03;
+		data->alarms = lm80_read_value(client, LM80_REG_ALARM1) +
+		    (lm80_read_value(client, LM80_REG_ALARM2) << 8);
+		data->last_updated = jiffies;
+		data->valid = 1;
+	}
+
+	up(&data->update_lock);
+
+	return data;
+}
+
+static int __init sensors_lm80_init(void)
+{
+	return i2c_add_driver(&lm80_driver);
+}
+
+static void __exit sensors_lm80_exit(void)
+{
+	i2c_del_driver(&lm80_driver);
+}
+
+MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl> and "
+	"Philip Edelbrock <phil@netroedge.com>");
+MODULE_DESCRIPTION("LM80 driver");
+MODULE_LICENSE("GPL");
+
+module_init(sensors_lm80_init);
+module_exit(sensors_lm80_exit);
diff --git a/drivers/i2c/chips/lm83.c b/drivers/i2c/chips/lm83.c
new file mode 100644
index 00000000000..3dafe60766a
--- /dev/null
+++ b/drivers/i2c/chips/lm83.c
@@ -0,0 +1,412 @@
+/*
+ * lm83.c - Part of lm_sensors, Linux kernel modules for hardware
+ *          monitoring
+ * Copyright (C) 2003  Jean Delvare <khali@linux-fr.org>
+ *
+ * Heavily inspired from the lm78, lm75 and adm1021 drivers. The LM83 is
+ * a sensor chip made by National Semiconductor. It reports up to four
+ * temperatures (its own plus up to three external ones) with a 1 deg
+ * resolution and a 3-4 deg accuracy. Complete datasheet can be obtained
+ * from National's website at:
+ *   http://www.national.com/pf/LM/LM83.html
+ * Since the datasheet omits to give the chip stepping code, I give it
+ * here: 0x03 (at register 0xff).
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/jiffies.h>
+#include <linux/i2c.h>
+#include <linux/i2c-sensor.h>
+
+/*
+ * Addresses to scan
+ * Address is selected using 2 three-level pins, resulting in 9 possible
+ * addresses.
+ */
+
+static unsigned short normal_i2c[] = { 0x18, 0x19, 0x1a,
+					0x29, 0x2a, 0x2b,
+					0x4c, 0x4d, 0x4e,
+					I2C_CLIENT_END };
+static unsigned int normal_isa[] = { I2C_CLIENT_ISA_END };
+
+/*
+ * Insmod parameters
+ */
+
+SENSORS_INSMOD_1(lm83);
+
+/*
+ * The LM83 registers
+ * Manufacturer ID is 0x01 for National Semiconductor.
+ */
+
+#define LM83_REG_R_MAN_ID		0xFE
+#define LM83_REG_R_CHIP_ID		0xFF
+#define LM83_REG_R_CONFIG		0x03
+#define LM83_REG_W_CONFIG		0x09
+#define LM83_REG_R_STATUS1		0x02
+#define LM83_REG_R_STATUS2		0x35
+#define LM83_REG_R_LOCAL_TEMP		0x00
+#define LM83_REG_R_LOCAL_HIGH		0x05
+#define LM83_REG_W_LOCAL_HIGH		0x0B
+#define LM83_REG_R_REMOTE1_TEMP		0x30
+#define LM83_REG_R_REMOTE1_HIGH		0x38
+#define LM83_REG_W_REMOTE1_HIGH		0x50
+#define LM83_REG_R_REMOTE2_TEMP		0x01
+#define LM83_REG_R_REMOTE2_HIGH		0x07
+#define LM83_REG_W_REMOTE2_HIGH		0x0D
+#define LM83_REG_R_REMOTE3_TEMP		0x31
+#define LM83_REG_R_REMOTE3_HIGH		0x3A
+#define LM83_REG_W_REMOTE3_HIGH		0x52
+#define LM83_REG_R_TCRIT		0x42
+#define LM83_REG_W_TCRIT		0x5A
+
+/*
+ * Conversions and various macros
+ * The LM83 uses signed 8-bit values with LSB = 1 degree Celcius.
+ */
+
+#define TEMP_FROM_REG(val)	((val) * 1000)
+#define TEMP_TO_REG(val)	((val) <= -128000 ? -128 : \
+				 (val) >= 127000 ? 127 : \
+				 (val) < 0 ? ((val) - 500) / 1000 : \
+				 ((val) + 500) / 1000)
+
+static const u8 LM83_REG_R_TEMP[] = {
+	LM83_REG_R_LOCAL_TEMP,
+	LM83_REG_R_REMOTE1_TEMP,
+	LM83_REG_R_REMOTE2_TEMP,
+	LM83_REG_R_REMOTE3_TEMP
+};
+
+static const u8 LM83_REG_R_HIGH[] = {
+	LM83_REG_R_LOCAL_HIGH,
+	LM83_REG_R_REMOTE1_HIGH,
+	LM83_REG_R_REMOTE2_HIGH,
+	LM83_REG_R_REMOTE3_HIGH
+};
+
+static const u8 LM83_REG_W_HIGH[] = {
+	LM83_REG_W_LOCAL_HIGH,
+	LM83_REG_W_REMOTE1_HIGH,
+	LM83_REG_W_REMOTE2_HIGH,
+	LM83_REG_W_REMOTE3_HIGH
+};
+
+/*
+ * Functions declaration
+ */
+
+static int lm83_attach_adapter(struct i2c_adapter *adapter);
+static int lm83_detect(struct i2c_adapter *adapter, int address, int kind);
+static int lm83_detach_client(struct i2c_client *client);
+static struct lm83_data *lm83_update_device(struct device *dev);
+
+/*
+ * Driver data (common to all clients)
+ */
+ 
+static struct i2c_driver lm83_driver = {
+	.owner		= THIS_MODULE,
+	.name		= "lm83",
+	.id		= I2C_DRIVERID_LM83,
+	.flags		= I2C_DF_NOTIFY,
+	.attach_adapter	= lm83_attach_adapter,
+	.detach_client	= lm83_detach_client,
+};
+
+/*
+ * Client data (each client gets its own)
+ */
+
+struct lm83_data {
+	struct i2c_client client;
+	struct semaphore update_lock;
+	char valid; /* zero until following fields are valid */
+	unsigned long last_updated; /* in jiffies */
+
+	/* registers values */
+	s8 temp_input[4];
+	s8 temp_high[4];
+	s8 temp_crit;
+	u16 alarms; /* bitvector, combined */
+};
+
+/*
+ * Sysfs stuff
+ */
+
+#define show_temp(suffix, value) \
+static ssize_t show_temp_##suffix(struct device *dev, char *buf) \
+{ \
+	struct lm83_data *data = lm83_update_device(dev); \
+	return sprintf(buf, "%d\n", TEMP_FROM_REG(data->value)); \
+}
+show_temp(input1, temp_input[0]);
+show_temp(input2, temp_input[1]);
+show_temp(input3, temp_input[2]);
+show_temp(input4, temp_input[3]);
+show_temp(high1, temp_high[0]);
+show_temp(high2, temp_high[1]);
+show_temp(high3, temp_high[2]);
+show_temp(high4, temp_high[3]);
+show_temp(crit, temp_crit);
+
+#define set_temp(suffix, value, reg) \
+static ssize_t set_temp_##suffix(struct device *dev, const char *buf, \
+	size_t count) \
+{ \
+	struct i2c_client *client = to_i2c_client(dev); \
+	struct lm83_data *data = i2c_get_clientdata(client); \
+	long val = simple_strtol(buf, NULL, 10); \
+ \
+	down(&data->update_lock); \
+	data->value = TEMP_TO_REG(val); \
+	i2c_smbus_write_byte_data(client, reg, data->value); \
+	up(&data->update_lock); \
+	return count; \
+}
+set_temp(high1, temp_high[0], LM83_REG_W_LOCAL_HIGH);
+set_temp(high2, temp_high[1], LM83_REG_W_REMOTE1_HIGH);
+set_temp(high3, temp_high[2], LM83_REG_W_REMOTE2_HIGH);
+set_temp(high4, temp_high[3], LM83_REG_W_REMOTE3_HIGH);
+set_temp(crit, temp_crit, LM83_REG_W_TCRIT);
+
+static ssize_t show_alarms(struct device *dev, char *buf)
+{
+	struct lm83_data *data = lm83_update_device(dev);
+	return sprintf(buf, "%d\n", data->alarms);
+}
+
+static DEVICE_ATTR(temp1_input, S_IRUGO, show_temp_input1, NULL);
+static DEVICE_ATTR(temp2_input, S_IRUGO, show_temp_input2, NULL);
+static DEVICE_ATTR(temp3_input, S_IRUGO, show_temp_input3, NULL);
+static DEVICE_ATTR(temp4_input, S_IRUGO, show_temp_input4, NULL);
+static DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO, show_temp_high1,
+    set_temp_high1);
+static DEVICE_ATTR(temp2_max, S_IWUSR | S_IRUGO, show_temp_high2,
+    set_temp_high2);
+static DEVICE_ATTR(temp3_max, S_IWUSR | S_IRUGO, show_temp_high3,
+    set_temp_high3);
+static DEVICE_ATTR(temp4_max, S_IWUSR | S_IRUGO, show_temp_high4,
+    set_temp_high4);
+static DEVICE_ATTR(temp1_crit, S_IRUGO, show_temp_crit, NULL);
+static DEVICE_ATTR(temp2_crit, S_IRUGO, show_temp_crit, NULL);
+static DEVICE_ATTR(temp3_crit, S_IWUSR | S_IRUGO, show_temp_crit,
+    set_temp_crit);
+static DEVICE_ATTR(temp4_crit, S_IRUGO, show_temp_crit, NULL);
+static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL);
+
+/*
+ * Real code
+ */
+
+static int lm83_attach_adapter(struct i2c_adapter *adapter)
+{
+	if (!(adapter->class & I2C_CLASS_HWMON))
+		return 0;
+	return i2c_detect(adapter, &addr_data, lm83_detect);
+}
+
+/*
+ * The following function does more than just detection. If detection
+ * succeeds, it also registers the new chip.
+ */
+static int lm83_detect(struct i2c_adapter *adapter, int address, int kind)
+{
+	struct i2c_client *new_client;
+	struct lm83_data *data;
+	int err = 0;
+	const char *name = "";
+
+	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
+		goto exit;
+
+	if (!(data = kmalloc(sizeof(struct lm83_data), GFP_KERNEL))) {
+		err = -ENOMEM;
+		goto exit;
+	}
+	memset(data, 0, sizeof(struct lm83_data));
+
+	/* The common I2C client data is placed right after the
+	 * LM83-specific data. */
+	new_client = &data->client;
+	i2c_set_clientdata(new_client, data);
+	new_client->addr = address;
+	new_client->adapter = adapter;
+	new_client->driver = &lm83_driver;
+	new_client->flags = 0;
+
+	/* Now we do the detection and identification. A negative kind
+	 * means that the driver was loaded with no force parameter
+	 * (default), so we must both detect and identify the chip
+	 * (actually there is only one possible kind of chip for now, LM83).
+	 * A zero kind means that the driver was loaded with the force
+	 * parameter, the detection step shall be skipped. A positive kind
+	 * means that the driver was loaded with the force parameter and a
+	 * given kind of chip is requested, so both the detection and the
+	 * identification steps are skipped. */
+
+	/* Default to an LM83 if forced */
+	if (kind == 0)
+		kind = lm83;
+
+	if (kind < 0) { /* detection */
+		if (((i2c_smbus_read_byte_data(new_client, LM83_REG_R_STATUS1)
+		    & 0xA8) != 0x00) ||
+		    ((i2c_smbus_read_byte_data(new_client, LM83_REG_R_STATUS2)
+		    & 0x48) != 0x00) ||
+		    ((i2c_smbus_read_byte_data(new_client, LM83_REG_R_CONFIG)
+		    & 0x41) != 0x00)) {
+			dev_dbg(&adapter->dev,
+			    "LM83 detection failed at 0x%02x.\n", address);
+			goto exit_free;
+		}
+	}
+
+	if (kind <= 0) { /* identification */
+		u8 man_id, chip_id;
+
+		man_id = i2c_smbus_read_byte_data(new_client,
+		    LM83_REG_R_MAN_ID);
+		chip_id = i2c_smbus_read_byte_data(new_client,
+		    LM83_REG_R_CHIP_ID);
+
+		if (man_id == 0x01) { /* National Semiconductor */
+			if (chip_id == 0x03) {
+				kind = lm83;
+			}
+		}
+
+		if (kind <= 0) { /* identification failed */
+			dev_info(&adapter->dev,
+			    "Unsupported chip (man_id=0x%02X, "
+			    "chip_id=0x%02X).\n", man_id, chip_id);
+			goto exit_free;
+		}
+	}
+
+	if (kind == lm83) {
+		name = "lm83";
+	}
+
+	/* We can fill in the remaining client fields */
+	strlcpy(new_client->name, name, I2C_NAME_SIZE);
+	data->valid = 0;
+	init_MUTEX(&data->update_lock);
+
+	/* Tell the I2C layer a new client has arrived */
+	if ((err = i2c_attach_client(new_client)))
+		goto exit_free;
+
+	/*
+	 * Initialize the LM83 chip
+	 * (Nothing to do for this one.)
+	 */
+
+	/* Register sysfs hooks */
+	device_create_file(&new_client->dev, &dev_attr_temp1_input);
+	device_create_file(&new_client->dev, &dev_attr_temp2_input);
+	device_create_file(&new_client->dev, &dev_attr_temp3_input);
+	device_create_file(&new_client->dev, &dev_attr_temp4_input);
+	device_create_file(&new_client->dev, &dev_attr_temp1_max);
+	device_create_file(&new_client->dev, &dev_attr_temp2_max);
+	device_create_file(&new_client->dev, &dev_attr_temp3_max);
+	device_create_file(&new_client->dev, &dev_attr_temp4_max);
+	device_create_file(&new_client->dev, &dev_attr_temp1_crit);
+	device_create_file(&new_client->dev, &dev_attr_temp2_crit);
+	device_create_file(&new_client->dev, &dev_attr_temp3_crit);
+	device_create_file(&new_client->dev, &dev_attr_temp4_crit);
+	device_create_file(&new_client->dev, &dev_attr_alarms);
+
+	return 0;
+
+exit_free:
+	kfree(data);
+exit:
+	return err;
+}
+
+static int lm83_detach_client(struct i2c_client *client)
+{
+	int err;
+
+	if ((err = i2c_detach_client(client))) {
+		dev_err(&client->dev,
+		    "Client deregistration failed, client not detached.\n");
+		return err;
+	}
+
+	kfree(i2c_get_clientdata(client));
+	return 0;
+}
+
+static struct lm83_data *lm83_update_device(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct lm83_data *data = i2c_get_clientdata(client);
+
+	down(&data->update_lock);
+
+	if (time_after(jiffies, data->last_updated + HZ * 2) || !data->valid) {
+		int nr;
+
+		dev_dbg(&client->dev, "Updating lm83 data.\n");
+		for (nr = 0; nr < 4 ; nr++) {
+			data->temp_input[nr] =
+			    i2c_smbus_read_byte_data(client,
+			    LM83_REG_R_TEMP[nr]);
+			data->temp_high[nr] =
+			    i2c_smbus_read_byte_data(client,
+			    LM83_REG_R_HIGH[nr]);
+		}
+		data->temp_crit =
+		    i2c_smbus_read_byte_data(client, LM83_REG_R_TCRIT);
+		data->alarms =
+		    i2c_smbus_read_byte_data(client, LM83_REG_R_STATUS1)
+		    + (i2c_smbus_read_byte_data(client, LM83_REG_R_STATUS2)
+		    << 8);
+
+		data->last_updated = jiffies;
+		data->valid = 1;
+	}
+
+	up(&data->update_lock);
+
+	return data;
+}
+
+static int __init sensors_lm83_init(void)
+{
+	return i2c_add_driver(&lm83_driver);
+}
+
+static void __exit sensors_lm83_exit(void)
+{
+	i2c_del_driver(&lm83_driver);
+}
+
+MODULE_AUTHOR("Jean Delvare <khali@linux-fr.org>");
+MODULE_DESCRIPTION("LM83 driver");
+MODULE_LICENSE("GPL");
+
+module_init(sensors_lm83_init);
+module_exit(sensors_lm83_exit);
diff --git a/drivers/i2c/chips/lm85.c b/drivers/i2c/chips/lm85.c
new file mode 100644
index 00000000000..b1a0dc5f6b3
--- /dev/null
+++ b/drivers/i2c/chips/lm85.c
@@ -0,0 +1,1578 @@
+/*
+    lm85.c - Part of lm_sensors, Linux kernel modules for hardware
+             monitoring
+    Copyright (c) 1998, 1999  Frodo Looijaard <frodol@dds.nl> 
+    Copyright (c) 2002, 2003  Philip Pokorny <ppokorny@penguincomputing.com>
+    Copyright (c) 2003        Margit Schubert-While <margitsw@t-online.de>
+    Copyright (c) 2004        Justin Thiessen <jthiessen@penguincomputing.com>
+
+    Chip details at	      <http://www.national.com/ds/LM/LM85.pdf>
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/jiffies.h>
+#include <linux/i2c.h>
+#include <linux/i2c-sensor.h>
+#include <linux/i2c-vid.h>
+
+/* Addresses to scan */
+static unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, I2C_CLIENT_END };
+static unsigned int normal_isa[] = { I2C_CLIENT_ISA_END };
+
+/* Insmod parameters */
+SENSORS_INSMOD_6(lm85b, lm85c, adm1027, adt7463, emc6d100, emc6d102);
+
+/* The LM85 registers */
+
+#define	LM85_REG_IN(nr)			(0x20 + (nr))
+#define	LM85_REG_IN_MIN(nr)		(0x44 + (nr) * 2)
+#define	LM85_REG_IN_MAX(nr)		(0x45 + (nr) * 2)
+
+#define	LM85_REG_TEMP(nr)		(0x25 + (nr))
+#define	LM85_REG_TEMP_MIN(nr)		(0x4e + (nr) * 2)
+#define	LM85_REG_TEMP_MAX(nr)		(0x4f + (nr) * 2)
+
+/* Fan speeds are LSB, MSB (2 bytes) */
+#define	LM85_REG_FAN(nr)		(0x28 + (nr) *2)
+#define	LM85_REG_FAN_MIN(nr)		(0x54 + (nr) *2)
+
+#define	LM85_REG_PWM(nr)		(0x30 + (nr))
+
+#define	ADT7463_REG_OPPOINT(nr)		(0x33 + (nr))
+
+#define	ADT7463_REG_TMIN_CTL1		0x36
+#define	ADT7463_REG_TMIN_CTL2		0x37
+
+#define	LM85_REG_DEVICE			0x3d
+#define	LM85_REG_COMPANY		0x3e
+#define	LM85_REG_VERSTEP		0x3f
+/* These are the recognized values for the above regs */
+#define	LM85_DEVICE_ADX			0x27
+#define	LM85_COMPANY_NATIONAL		0x01
+#define	LM85_COMPANY_ANALOG_DEV		0x41
+#define	LM85_COMPANY_SMSC      		0x5c
+#define	LM85_VERSTEP_VMASK              0xf0
+#define	LM85_VERSTEP_GENERIC		0x60
+#define	LM85_VERSTEP_LM85C		0x60
+#define	LM85_VERSTEP_LM85B		0x62
+#define	LM85_VERSTEP_ADM1027		0x60
+#define	LM85_VERSTEP_ADT7463		0x62
+#define	LM85_VERSTEP_ADT7463C		0x6A
+#define	LM85_VERSTEP_EMC6D100_A0        0x60
+#define	LM85_VERSTEP_EMC6D100_A1        0x61
+#define	LM85_VERSTEP_EMC6D102		0x65
+
+#define	LM85_REG_CONFIG			0x40
+
+#define	LM85_REG_ALARM1			0x41
+#define	LM85_REG_ALARM2			0x42
+
+#define	LM85_REG_VID			0x43
+
+/* Automated FAN control */
+#define	LM85_REG_AFAN_CONFIG(nr)	(0x5c + (nr))
+#define	LM85_REG_AFAN_RANGE(nr)		(0x5f + (nr))
+#define	LM85_REG_AFAN_SPIKE1		0x62
+#define	LM85_REG_AFAN_SPIKE2		0x63
+#define	LM85_REG_AFAN_MINPWM(nr)	(0x64 + (nr))
+#define	LM85_REG_AFAN_LIMIT(nr)		(0x67 + (nr))
+#define	LM85_REG_AFAN_CRITICAL(nr)	(0x6a + (nr))
+#define	LM85_REG_AFAN_HYST1		0x6d
+#define	LM85_REG_AFAN_HYST2		0x6e
+
+#define	LM85_REG_TACH_MODE		0x74
+#define	LM85_REG_SPINUP_CTL		0x75
+
+#define	ADM1027_REG_TEMP_OFFSET(nr)	(0x70 + (nr))
+#define	ADM1027_REG_CONFIG2		0x73
+#define	ADM1027_REG_INTMASK1		0x74
+#define	ADM1027_REG_INTMASK2		0x75
+#define	ADM1027_REG_EXTEND_ADC1		0x76
+#define	ADM1027_REG_EXTEND_ADC2		0x77
+#define	ADM1027_REG_CONFIG3		0x78
+#define	ADM1027_REG_FAN_PPR		0x7b
+
+#define	ADT7463_REG_THERM		0x79
+#define	ADT7463_REG_THERM_LIMIT		0x7A
+
+#define EMC6D100_REG_ALARM3             0x7d
+/* IN5, IN6 and IN7 */
+#define	EMC6D100_REG_IN(nr)             (0x70 + ((nr)-5))
+#define	EMC6D100_REG_IN_MIN(nr)         (0x73 + ((nr)-5) * 2)
+#define	EMC6D100_REG_IN_MAX(nr)         (0x74 + ((nr)-5) * 2)
+#define	EMC6D102_REG_EXTEND_ADC1	0x85
+#define	EMC6D102_REG_EXTEND_ADC2	0x86
+#define	EMC6D102_REG_EXTEND_ADC3	0x87
+#define	EMC6D102_REG_EXTEND_ADC4	0x88
+
+#define	LM85_ALARM_IN0			0x0001
+#define	LM85_ALARM_IN1			0x0002
+#define	LM85_ALARM_IN2			0x0004
+#define	LM85_ALARM_IN3			0x0008
+#define	LM85_ALARM_TEMP1		0x0010
+#define	LM85_ALARM_TEMP2		0x0020
+#define	LM85_ALARM_TEMP3		0x0040
+#define	LM85_ALARM_ALARM2		0x0080
+#define	LM85_ALARM_IN4			0x0100
+#define	LM85_ALARM_RESERVED		0x0200
+#define	LM85_ALARM_FAN1			0x0400
+#define	LM85_ALARM_FAN2			0x0800
+#define	LM85_ALARM_FAN3			0x1000
+#define	LM85_ALARM_FAN4			0x2000
+#define	LM85_ALARM_TEMP1_FAULT		0x4000
+#define	LM85_ALARM_TEMP3_FAULT		0x8000
+
+
+/* Conversions. Rounding and limit checking is only done on the TO_REG 
+   variants. Note that you should be a bit careful with which arguments
+   these macros are called: arguments may be evaluated more than once.
+ */
+
+/* IN are scaled acording to built-in resistors */
+static int lm85_scaling[] = {  /* .001 Volts */
+		2500, 2250, 3300, 5000, 12000,
+		3300, 1500, 1800 /*EMC6D100*/
+	};
+#define SCALE(val,from,to)		(((val)*(to) + ((from)/2))/(from))
+
+#define INS_TO_REG(n,val)	\
+		SENSORS_LIMIT(SCALE(val,lm85_scaling[n],192),0,255)
+
+#define INSEXT_FROM_REG(n,val,ext,scale)	\
+		SCALE((val)*(scale) + (ext),192*(scale),lm85_scaling[n])
+
+#define INS_FROM_REG(n,val)   INSEXT_FROM_REG(n,val,0,1)
+
+/* FAN speed is measured using 90kHz clock */
+#define FAN_TO_REG(val)		(SENSORS_LIMIT( (val)<=0?0: 5400000/(val),0,65534))
+#define FAN_FROM_REG(val)	((val)==0?-1:(val)==0xffff?0:5400000/(val))
+
+/* Temperature is reported in .001 degC increments */
+#define TEMP_TO_REG(val)	\
+		SENSORS_LIMIT(SCALE(val,1000,1),-127,127)
+#define TEMPEXT_FROM_REG(val,ext,scale)	\
+		SCALE((val)*scale + (ext),scale,1000)
+#define TEMP_FROM_REG(val)	\
+		TEMPEXT_FROM_REG(val,0,1)
+
+#define PWM_TO_REG(val)			(SENSORS_LIMIT(val,0,255))
+#define PWM_FROM_REG(val)		(val)
+
+
+/* ZONEs have the following parameters:
+ *    Limit (low) temp,           1. degC
+ *    Hysteresis (below limit),   1. degC (0-15)
+ *    Range of speed control,     .1 degC (2-80)
+ *    Critical (high) temp,       1. degC
+ *
+ * FAN PWMs have the following parameters:
+ *    Reference Zone,                 1, 2, 3, etc.
+ *    Spinup time,                    .05 sec
+ *    PWM value at limit/low temp,    1 count
+ *    PWM Frequency,                  1. Hz
+ *    PWM is Min or OFF below limit,  flag
+ *    Invert PWM output,              flag
+ *
+ * Some chips filter the temp, others the fan.
+ *    Filter constant (or disabled)   .1 seconds
+ */
+
+/* These are the zone temperature range encodings in .001 degree C */
+static int lm85_range_map[] = {   
+		2000,  2500,  3300,  4000,  5000,  6600,
+		8000, 10000, 13300, 16000, 20000, 26600,
+		32000, 40000, 53300, 80000
+	};
+static int RANGE_TO_REG( int range )
+{
+	int i;
+
+	if ( range < lm85_range_map[0] ) { 
+		return 0 ;
+	} else if ( range > lm85_range_map[15] ) {
+		return 15 ;
+	} else {  /* find closest match */
+		for ( i = 14 ; i >= 0 ; --i ) {
+			if ( range > lm85_range_map[i] ) { /* range bracketed */
+				if ((lm85_range_map[i+1] - range) < 
+					(range - lm85_range_map[i])) {
+					i++;
+					break;
+				}
+				break;
+			}
+		}
+	}
+	return( i & 0x0f );
+}
+#define RANGE_FROM_REG(val) (lm85_range_map[(val)&0x0f])
+
+/* These are the Acoustic Enhancement, or Temperature smoothing encodings
+ * NOTE: The enable/disable bit is INCLUDED in these encodings as the
+ *       MSB (bit 3, value 8).  If the enable bit is 0, the encoded value
+ *       is ignored, or set to 0.
+ */
+/* These are the PWM frequency encodings */
+static int lm85_freq_map[] = { /* .1 Hz */
+		100, 150, 230, 300, 380, 470, 620, 940
+	};
+static int FREQ_TO_REG( int freq )
+{
+	int i;
+
+	if( freq >= lm85_freq_map[7] ) { return 7 ; }
+	for( i = 0 ; i < 7 ; ++i )
+		if( freq <= lm85_freq_map[i] )
+			break ;
+	return( i & 0x07 );
+}
+#define FREQ_FROM_REG(val) (lm85_freq_map[(val)&0x07])
+
+/* Since we can't use strings, I'm abusing these numbers
+ *   to stand in for the following meanings:
+ *      1 -- PWM responds to Zone 1
+ *      2 -- PWM responds to Zone 2
+ *      3 -- PWM responds to Zone 3
+ *     23 -- PWM responds to the higher temp of Zone 2 or 3
+ *    123 -- PWM responds to highest of Zone 1, 2, or 3
+ *      0 -- PWM is always at 0% (ie, off)
+ *     -1 -- PWM is always at 100%
+ *     -2 -- PWM responds to manual control
+ */
+
+static int lm85_zone_map[] = { 1, 2, 3, -1, 0, 23, 123, -2 };
+#define ZONE_FROM_REG(val) (lm85_zone_map[((val)>>5)&0x07])
+
+static int ZONE_TO_REG( int zone )
+{
+	int i;
+
+	for( i = 0 ; i <= 7 ; ++i )
+		if( zone == lm85_zone_map[i] )
+			break ;
+	if( i > 7 )   /* Not found. */
+		i = 3;  /* Always 100% */
+	return( (i & 0x07)<<5 );
+}
+
+#define HYST_TO_REG(val) (SENSORS_LIMIT(((val)+500)/1000,0,15))
+#define HYST_FROM_REG(val) ((val)*1000)
+
+#define OFFSET_TO_REG(val) (SENSORS_LIMIT((val)/25,-127,127))
+#define OFFSET_FROM_REG(val) ((val)*25)
+
+#define PPR_MASK(fan) (0x03<<(fan *2))
+#define PPR_TO_REG(val,fan) (SENSORS_LIMIT((val)-1,0,3)<<(fan *2))
+#define PPR_FROM_REG(val,fan) ((((val)>>(fan * 2))&0x03)+1)
+
+/* i2c-vid.h defines vid_from_reg() */
+#define VID_FROM_REG(val,vrm) (vid_from_reg((val),(vrm)))
+
+#define ALARMS_FROM_REG(val) (val)
+
+/* Unlike some other drivers we DO NOT set initial limits.  Use
+ * the config file to set limits.  Some users have reported
+ * motherboards shutting down when we set limits in a previous
+ * version of the driver.
+ */
+
+/* Chip sampling rates
+ *
+ * Some sensors are not updated more frequently than once per second
+ *    so it doesn't make sense to read them more often than that.
+ *    We cache the results and return the saved data if the driver
+ *    is called again before a second has elapsed.
+ *
+ * Also, there is significant configuration data for this chip
+ *    given the automatic PWM fan control that is possible.  There
+ *    are about 47 bytes of config data to only 22 bytes of actual
+ *    readings.  So, we keep the config data up to date in the cache
+ *    when it is written and only sample it once every 1 *minute*
+ */
+#define LM85_DATA_INTERVAL  (HZ + HZ / 2)
+#define LM85_CONFIG_INTERVAL  (1 * 60 * HZ)
+
+/* For each registered LM85, we need to keep some data in memory. That
+   data is pointed to by lm85_list[NR]->data. The structure itself is
+   dynamically allocated, at the same time when a new lm85 client is
+   allocated. */
+
+/* LM85 can automatically adjust fan speeds based on temperature
+ * This structure encapsulates an entire Zone config.  There are
+ * three zones (one for each temperature input) on the lm85
+ */
+struct lm85_zone {
+	s8 limit;	/* Low temp limit */
+	u8 hyst;	/* Low limit hysteresis. (0-15) */
+	u8 range;	/* Temp range, encoded */
+	s8 critical;	/* "All fans ON" temp limit */
+	u8 off_desired; /* Actual "off" temperature specified.  Preserved 
+			 * to prevent "drift" as other autofan control
+			 * values change.
+			 */
+	u8 max_desired; /* Actual "max" temperature specified.  Preserved 
+			 * to prevent "drift" as other autofan control
+			 * values change.
+			 */
+};
+
+struct lm85_autofan {
+	u8 config;	/* Register value */
+	u8 freq;	/* PWM frequency, encoded */
+	u8 min_pwm;	/* Minimum PWM value, encoded */
+	u8 min_off;	/* Min PWM or OFF below "limit", flag */
+};
+
+struct lm85_data {
+	struct i2c_client client;
+	struct semaphore lock;
+	enum chips type;
+
+	struct semaphore update_lock;
+	int valid;		/* !=0 if following fields are valid */
+	unsigned long last_reading;	/* In jiffies */
+	unsigned long last_config;	/* In jiffies */
+
+	u8 in[8];		/* Register value */
+	u8 in_max[8];		/* Register value */
+	u8 in_min[8];		/* Register value */
+	s8 temp[3];		/* Register value */
+	s8 temp_min[3];		/* Register value */
+	s8 temp_max[3];		/* Register value */
+	s8 temp_offset[3];	/* Register value */
+	u16 fan[4];		/* Register value */
+	u16 fan_min[4];		/* Register value */
+	u8 pwm[3];		/* Register value */
+	u8 spinup_ctl;		/* Register encoding, combined */
+	u8 tach_mode;		/* Register encoding, combined */
+	u8 temp_ext[3];		/* Decoded values */
+	u8 in_ext[8];		/* Decoded values */
+	u8 adc_scale;		/* ADC Extended bits scaling factor */
+	u8 fan_ppr;		/* Register value */
+	u8 smooth[3];		/* Register encoding */
+	u8 vid;			/* Register value */
+	u8 vrm;			/* VRM version */
+	u8 syncpwm3;		/* Saved PWM3 for TACH 2,3,4 config */
+	u8 oppoint[3];		/* Register value */
+	u16 tmin_ctl;		/* Register value */
+	unsigned long therm_total; /* Cummulative therm count */
+	u8 therm_limit;		/* Register value */
+	u32 alarms;		/* Register encoding, combined */
+	struct lm85_autofan autofan[3];
+	struct lm85_zone zone[3];
+};
+
+static int lm85_attach_adapter(struct i2c_adapter *adapter);
+static int lm85_detect(struct i2c_adapter *adapter, int address,
+			int kind);
+static int lm85_detach_client(struct i2c_client *client);
+
+static int lm85_read_value(struct i2c_client *client, u8 register);
+static int lm85_write_value(struct i2c_client *client, u8 register, int value);
+static struct lm85_data *lm85_update_device(struct device *dev);
+static void lm85_init_client(struct i2c_client *client);
+
+
+static struct i2c_driver lm85_driver = {
+	.owner          = THIS_MODULE,
+	.name           = "lm85",
+	.id             = I2C_DRIVERID_LM85,
+	.flags          = I2C_DF_NOTIFY,
+	.attach_adapter = lm85_attach_adapter,
+	.detach_client  = lm85_detach_client,
+};
+
+
+/* 4 Fans */
+static ssize_t show_fan(struct device *dev, char *buf, int nr)
+{
+	struct lm85_data *data = lm85_update_device(dev);
+	return sprintf(buf,"%d\n", FAN_FROM_REG(data->fan[nr]) );
+}
+static ssize_t show_fan_min(struct device *dev, char *buf, int nr)
+{
+	struct lm85_data *data = lm85_update_device(dev);
+	return sprintf(buf,"%d\n", FAN_FROM_REG(data->fan_min[nr]) );
+}
+static ssize_t set_fan_min(struct device *dev, const char *buf, 
+		size_t count, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct lm85_data *data = i2c_get_clientdata(client);
+	long val = simple_strtol(buf, NULL, 10);
+
+	down(&data->update_lock);
+	data->fan_min[nr] = FAN_TO_REG(val);
+	lm85_write_value(client, LM85_REG_FAN_MIN(nr), data->fan_min[nr]);
+	up(&data->update_lock);
+	return count;
+}
+
+#define show_fan_offset(offset)						\
+static ssize_t show_fan_##offset (struct device *dev, char *buf)	\
+{									\
+	return show_fan(dev, buf, offset - 1);				\
+}									\
+static ssize_t show_fan_##offset##_min (struct device *dev, char *buf)	\
+{									\
+	return show_fan_min(dev, buf, offset - 1);			\
+}									\
+static ssize_t set_fan_##offset##_min (struct device *dev, 		\
+	const char *buf, size_t count) 					\
+{									\
+	return set_fan_min(dev, buf, count, offset - 1);		\
+}									\
+static DEVICE_ATTR(fan##offset##_input, S_IRUGO, show_fan_##offset,	\
+		NULL);							\
+static DEVICE_ATTR(fan##offset##_min, S_IRUGO | S_IWUSR, 		\
+		show_fan_##offset##_min, set_fan_##offset##_min);
+
+show_fan_offset(1);
+show_fan_offset(2);
+show_fan_offset(3);
+show_fan_offset(4);
+
+/* vid, vrm, alarms */
+
+static ssize_t show_vid_reg(struct device *dev, char *buf)
+{
+	struct lm85_data *data = lm85_update_device(dev);
+	return sprintf(buf, "%ld\n", (long) vid_from_reg(data->vid, data->vrm));
+}
+
+static DEVICE_ATTR(cpu0_vid, S_IRUGO, show_vid_reg, NULL);
+
+static ssize_t show_vrm_reg(struct device *dev, char *buf)
+{
+	struct lm85_data *data = lm85_update_device(dev);
+	return sprintf(buf, "%ld\n", (long) data->vrm);
+}
+
+static ssize_t store_vrm_reg(struct device *dev, const char *buf, size_t count)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct lm85_data *data = i2c_get_clientdata(client);
+	u32 val;
+
+	val = simple_strtoul(buf, NULL, 10);
+	data->vrm = val;
+	return count;
+}
+
+static DEVICE_ATTR(vrm, S_IRUGO | S_IWUSR, show_vrm_reg, store_vrm_reg);
+
+static ssize_t show_alarms_reg(struct device *dev, char *buf)
+{
+	struct lm85_data *data = lm85_update_device(dev);
+	return sprintf(buf, "%ld\n", (long) ALARMS_FROM_REG(data->alarms));
+}
+
+static DEVICE_ATTR(alarms, S_IRUGO, show_alarms_reg, NULL);
+
+/* pwm */
+
+static ssize_t show_pwm(struct device *dev, char *buf, int nr)
+{
+	struct lm85_data *data = lm85_update_device(dev);
+	return sprintf(buf,"%d\n", PWM_FROM_REG(data->pwm[nr]) );
+}
+static ssize_t set_pwm(struct device *dev, const char *buf, 
+		size_t count, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct lm85_data *data = i2c_get_clientdata(client);
+	long val = simple_strtol(buf, NULL, 10);
+
+	down(&data->update_lock);
+	data->pwm[nr] = PWM_TO_REG(val);
+	lm85_write_value(client, LM85_REG_PWM(nr), data->pwm[nr]);
+	up(&data->update_lock);
+	return count;
+}
+static ssize_t show_pwm_enable(struct device *dev, char *buf, int nr)
+{
+	struct lm85_data *data = lm85_update_device(dev);
+	int	pwm_zone;
+
+	pwm_zone = ZONE_FROM_REG(data->autofan[nr].config);
+	return sprintf(buf,"%d\n", (pwm_zone != 0 && pwm_zone != -1) );
+}
+
+#define show_pwm_reg(offset)						\
+static ssize_t show_pwm_##offset (struct device *dev, char *buf)	\
+{									\
+	return show_pwm(dev, buf, offset - 1);				\
+}									\
+static ssize_t set_pwm_##offset (struct device *dev,			\
+				 const char *buf, size_t count)		\
+{									\
+	return set_pwm(dev, buf, count, offset - 1);			\
+}									\
+static ssize_t show_pwm_enable##offset (struct device *dev, char *buf)	\
+{									\
+	return show_pwm_enable(dev, buf, offset - 1);			\
+}									\
+static DEVICE_ATTR(pwm##offset, S_IRUGO | S_IWUSR, 			\
+		show_pwm_##offset, set_pwm_##offset);			\
+static DEVICE_ATTR(pwm##offset##_enable, S_IRUGO, 			\
+		show_pwm_enable##offset, NULL);
+
+show_pwm_reg(1);
+show_pwm_reg(2);
+show_pwm_reg(3);
+
+/* Voltages */
+
+static ssize_t show_in(struct device *dev, char *buf, int nr)
+{
+	struct lm85_data *data = lm85_update_device(dev);
+	return sprintf(	buf, "%d\n", INSEXT_FROM_REG(nr,
+						     data->in[nr],
+						     data->in_ext[nr],
+						     data->adc_scale) );
+}
+static ssize_t show_in_min(struct device *dev, char *buf, int nr)
+{
+	struct lm85_data *data = lm85_update_device(dev);
+	return sprintf(buf,"%d\n", INS_FROM_REG(nr, data->in_min[nr]) );
+}
+static ssize_t set_in_min(struct device *dev, const char *buf, 
+		size_t count, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct lm85_data *data = i2c_get_clientdata(client);
+	long val = simple_strtol(buf, NULL, 10);
+
+	down(&data->update_lock);
+	data->in_min[nr] = INS_TO_REG(nr, val);
+	lm85_write_value(client, LM85_REG_IN_MIN(nr), data->in_min[nr]);
+	up(&data->update_lock);
+	return count;
+}
+static ssize_t show_in_max(struct device *dev, char *buf, int nr)
+{
+	struct lm85_data *data = lm85_update_device(dev);
+	return sprintf(buf,"%d\n", INS_FROM_REG(nr, data->in_max[nr]) );
+}
+static ssize_t set_in_max(struct device *dev, const char *buf, 
+		size_t count, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct lm85_data *data = i2c_get_clientdata(client);
+	long val = simple_strtol(buf, NULL, 10);
+
+	down(&data->update_lock);
+	data->in_max[nr] = INS_TO_REG(nr, val);
+	lm85_write_value(client, LM85_REG_IN_MAX(nr), data->in_max[nr]);
+	up(&data->update_lock);
+	return count;
+}
+#define show_in_reg(offset)						\
+static ssize_t show_in_##offset (struct device *dev, char *buf)		\
+{									\
+	return show_in(dev, buf, offset);				\
+}									\
+static ssize_t show_in_##offset##_min (struct device *dev, char *buf)	\
+{									\
+	return show_in_min(dev, buf, offset);				\
+}									\
+static ssize_t show_in_##offset##_max (struct device *dev, char *buf)	\
+{									\
+	return show_in_max(dev, buf, offset);				\
+}									\
+static ssize_t set_in_##offset##_min (struct device *dev, 		\
+	const char *buf, size_t count) 					\
+{									\
+	return set_in_min(dev, buf, count, offset);			\
+}									\
+static ssize_t set_in_##offset##_max (struct device *dev, 		\
+	const char *buf, size_t count) 					\
+{									\
+	return set_in_max(dev, buf, count, offset);			\
+}									\
+static DEVICE_ATTR(in##offset##_input, S_IRUGO, show_in_##offset, 	\
+		NULL);							\
+static DEVICE_ATTR(in##offset##_min, S_IRUGO | S_IWUSR, 		\
+		show_in_##offset##_min, set_in_##offset##_min);		\
+static DEVICE_ATTR(in##offset##_max, S_IRUGO | S_IWUSR, 		\
+		show_in_##offset##_max, set_in_##offset##_max);
+
+show_in_reg(0);
+show_in_reg(1);
+show_in_reg(2);
+show_in_reg(3);
+show_in_reg(4);
+
+/* Temps */
+
+static ssize_t show_temp(struct device *dev, char *buf, int nr)
+{
+	struct lm85_data *data = lm85_update_device(dev);
+	return sprintf(buf,"%d\n", TEMPEXT_FROM_REG(data->temp[nr],
+						    data->temp_ext[nr],
+						    data->adc_scale) );
+}
+static ssize_t show_temp_min(struct device *dev, char *buf, int nr)
+{
+	struct lm85_data *data = lm85_update_device(dev);
+	return sprintf(buf,"%d\n", TEMP_FROM_REG(data->temp_min[nr]) );
+}
+static ssize_t set_temp_min(struct device *dev, const char *buf, 
+		size_t count, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct lm85_data *data = i2c_get_clientdata(client);
+	long val = simple_strtol(buf, NULL, 10);
+
+	down(&data->update_lock);
+	data->temp_min[nr] = TEMP_TO_REG(val);
+	lm85_write_value(client, LM85_REG_TEMP_MIN(nr), data->temp_min[nr]);
+	up(&data->update_lock);
+	return count;
+}
+static ssize_t show_temp_max(struct device *dev, char *buf, int nr)
+{
+	struct lm85_data *data = lm85_update_device(dev);
+	return sprintf(buf,"%d\n", TEMP_FROM_REG(data->temp_max[nr]) );
+}
+static ssize_t set_temp_max(struct device *dev, const char *buf, 
+		size_t count, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct lm85_data *data = i2c_get_clientdata(client);
+	long val = simple_strtol(buf, NULL, 10);	
+
+	down(&data->update_lock);
+	data->temp_max[nr] = TEMP_TO_REG(val);
+	lm85_write_value(client, LM85_REG_TEMP_MAX(nr), data->temp_max[nr]);
+	up(&data->update_lock);
+	return count;
+}
+#define show_temp_reg(offset)						\
+static ssize_t show_temp_##offset (struct device *dev, char *buf)	\
+{									\
+	return show_temp(dev, buf, offset - 1);				\
+}									\
+static ssize_t show_temp_##offset##_min (struct device *dev, char *buf)	\
+{									\
+	return show_temp_min(dev, buf, offset - 1);			\
+}									\
+static ssize_t show_temp_##offset##_max (struct device *dev, char *buf)	\
+{									\
+	return show_temp_max(dev, buf, offset - 1);			\
+}									\
+static ssize_t set_temp_##offset##_min (struct device *dev, 		\
+	const char *buf, size_t count) 					\
+{									\
+	return set_temp_min(dev, buf, count, offset - 1);		\
+}									\
+static ssize_t set_temp_##offset##_max (struct device *dev, 		\
+	const char *buf, size_t count) 					\
+{									\
+	return set_temp_max(dev, buf, count, offset - 1);		\
+}									\
+static DEVICE_ATTR(temp##offset##_input, S_IRUGO, show_temp_##offset,	\
+		NULL);							\
+static DEVICE_ATTR(temp##offset##_min, S_IRUGO | S_IWUSR, 		\
+		show_temp_##offset##_min, set_temp_##offset##_min);	\
+static DEVICE_ATTR(temp##offset##_max, S_IRUGO | S_IWUSR, 		\
+		show_temp_##offset##_max, set_temp_##offset##_max);
+
+show_temp_reg(1);
+show_temp_reg(2);
+show_temp_reg(3);
+
+
+/* Automatic PWM control */
+
+static ssize_t show_pwm_auto_channels(struct device *dev, char *buf, int nr)
+{
+	struct lm85_data *data = lm85_update_device(dev);
+	return sprintf(buf,"%d\n", ZONE_FROM_REG(data->autofan[nr].config));
+}
+static ssize_t set_pwm_auto_channels(struct device *dev, const char *buf,
+	size_t count, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct lm85_data *data = i2c_get_clientdata(client);
+	long val = simple_strtol(buf, NULL, 10);   
+
+	down(&data->update_lock);
+	data->autofan[nr].config = (data->autofan[nr].config & (~0xe0))
+		| ZONE_TO_REG(val) ;
+	lm85_write_value(client, LM85_REG_AFAN_CONFIG(nr),
+		data->autofan[nr].config);
+	up(&data->update_lock);
+	return count;
+}
+static ssize_t show_pwm_auto_pwm_min(struct device *dev, char *buf, int nr)
+{
+	struct lm85_data *data = lm85_update_device(dev);
+	return sprintf(buf,"%d\n", PWM_FROM_REG(data->autofan[nr].min_pwm));
+}
+static ssize_t set_pwm_auto_pwm_min(struct device *dev, const char *buf,
+	size_t count, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct lm85_data *data = i2c_get_clientdata(client);
+	long val = simple_strtol(buf, NULL, 10);
+
+	down(&data->update_lock);
+	data->autofan[nr].min_pwm = PWM_TO_REG(val);
+	lm85_write_value(client, LM85_REG_AFAN_MINPWM(nr),
+		data->autofan[nr].min_pwm);
+	up(&data->update_lock);
+	return count;
+}
+static ssize_t show_pwm_auto_pwm_minctl(struct device *dev, char *buf, int nr)
+{
+	struct lm85_data *data = lm85_update_device(dev);
+	return sprintf(buf,"%d\n", data->autofan[nr].min_off);
+}
+static ssize_t set_pwm_auto_pwm_minctl(struct device *dev, const char *buf,
+	size_t count, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct lm85_data *data = i2c_get_clientdata(client);
+	long val = simple_strtol(buf, NULL, 10);
+
+	down(&data->update_lock);
+	data->autofan[nr].min_off = val;
+	lm85_write_value(client, LM85_REG_AFAN_SPIKE1, data->smooth[0]
+		| data->syncpwm3
+		| (data->autofan[0].min_off ? 0x20 : 0)
+		| (data->autofan[1].min_off ? 0x40 : 0)
+		| (data->autofan[2].min_off ? 0x80 : 0)
+	);
+	up(&data->update_lock);
+	return count;
+}
+static ssize_t show_pwm_auto_pwm_freq(struct device *dev, char *buf, int nr)
+{
+	struct lm85_data *data = lm85_update_device(dev);
+	return sprintf(buf,"%d\n", FREQ_FROM_REG(data->autofan[nr].freq));
+}
+static ssize_t set_pwm_auto_pwm_freq(struct device *dev, const char *buf,
+		size_t count, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct lm85_data *data = i2c_get_clientdata(client);
+	long val = simple_strtol(buf, NULL, 10);
+
+	down(&data->update_lock);
+	data->autofan[nr].freq = FREQ_TO_REG(val);
+	lm85_write_value(client, LM85_REG_AFAN_RANGE(nr),
+		(data->zone[nr].range << 4)
+		| data->autofan[nr].freq
+	); 
+	up(&data->update_lock);
+	return count;
+}
+#define pwm_auto(offset)						\
+static ssize_t show_pwm##offset##_auto_channels (struct device *dev,	\
+	char *buf)							\
+{									\
+	return show_pwm_auto_channels(dev, buf, offset - 1);		\
+}									\
+static ssize_t set_pwm##offset##_auto_channels (struct device *dev,	\
+	const char *buf, size_t count)					\
+{									\
+	return set_pwm_auto_channels(dev, buf, count, offset - 1);	\
+}									\
+static ssize_t show_pwm##offset##_auto_pwm_min (struct device *dev,	\
+	char *buf)							\
+{									\
+	return show_pwm_auto_pwm_min(dev, buf, offset - 1);		\
+}									\
+static ssize_t set_pwm##offset##_auto_pwm_min (struct device *dev,	\
+	const char *buf, size_t count)					\
+{									\
+	return set_pwm_auto_pwm_min(dev, buf, count, offset - 1);	\
+}									\
+static ssize_t show_pwm##offset##_auto_pwm_minctl (struct device *dev,	\
+	char *buf)							\
+{									\
+	return show_pwm_auto_pwm_minctl(dev, buf, offset - 1);		\
+}									\
+static ssize_t set_pwm##offset##_auto_pwm_minctl (struct device *dev,	\
+	const char *buf, size_t count)					\
+{									\
+	return set_pwm_auto_pwm_minctl(dev, buf, count, offset - 1);	\
+}									\
+static ssize_t show_pwm##offset##_auto_pwm_freq (struct device *dev,	\
+	char *buf)							\
+{									\
+	return show_pwm_auto_pwm_freq(dev, buf, offset - 1);		\
+}									\
+static ssize_t set_pwm##offset##_auto_pwm_freq(struct device *dev,	\
+	const char *buf, size_t count)					\
+{									\
+	return set_pwm_auto_pwm_freq(dev, buf, count, offset - 1);	\
+}									\
+static DEVICE_ATTR(pwm##offset##_auto_channels, S_IRUGO | S_IWUSR,	\
+		show_pwm##offset##_auto_channels,			\
+		set_pwm##offset##_auto_channels);			\
+static DEVICE_ATTR(pwm##offset##_auto_pwm_min, S_IRUGO | S_IWUSR,	\
+		show_pwm##offset##_auto_pwm_min,			\
+		set_pwm##offset##_auto_pwm_min);			\
+static DEVICE_ATTR(pwm##offset##_auto_pwm_minctl, S_IRUGO | S_IWUSR,	\
+		show_pwm##offset##_auto_pwm_minctl,			\
+		set_pwm##offset##_auto_pwm_minctl);			\
+static DEVICE_ATTR(pwm##offset##_auto_pwm_freq, S_IRUGO | S_IWUSR,	\
+		show_pwm##offset##_auto_pwm_freq,			\
+		set_pwm##offset##_auto_pwm_freq);              
+pwm_auto(1);
+pwm_auto(2);
+pwm_auto(3);
+
+/* Temperature settings for automatic PWM control */
+
+static ssize_t show_temp_auto_temp_off(struct device *dev, char *buf, int nr)
+{
+	struct lm85_data *data = lm85_update_device(dev);
+	return sprintf(buf,"%d\n", TEMP_FROM_REG(data->zone[nr].limit) -
+		HYST_FROM_REG(data->zone[nr].hyst));
+}
+static ssize_t set_temp_auto_temp_off(struct device *dev, const char *buf,
+	size_t count, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct lm85_data *data = i2c_get_clientdata(client);
+	int min;
+	long val = simple_strtol(buf, NULL, 10);
+
+	down(&data->update_lock);
+	min = TEMP_FROM_REG(data->zone[nr].limit);
+	data->zone[nr].off_desired = TEMP_TO_REG(val);
+	data->zone[nr].hyst = HYST_TO_REG(min - val);
+	if ( nr == 0 || nr == 1 ) {
+		lm85_write_value(client, LM85_REG_AFAN_HYST1,
+			(data->zone[0].hyst << 4)
+			| data->zone[1].hyst
+			);
+	} else {
+		lm85_write_value(client, LM85_REG_AFAN_HYST2,
+			(data->zone[2].hyst << 4)
+		);
+	}
+	up(&data->update_lock);
+	return count;
+}
+static ssize_t show_temp_auto_temp_min(struct device *dev, char *buf, int nr)
+{
+	struct lm85_data *data = lm85_update_device(dev);
+	return sprintf(buf,"%d\n", TEMP_FROM_REG(data->zone[nr].limit) );
+}
+static ssize_t set_temp_auto_temp_min(struct device *dev, const char *buf,
+	size_t count, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct lm85_data *data = i2c_get_clientdata(client);
+	long val = simple_strtol(buf, NULL, 10);
+
+	down(&data->update_lock);
+	data->zone[nr].limit = TEMP_TO_REG(val);
+	lm85_write_value(client, LM85_REG_AFAN_LIMIT(nr),
+		data->zone[nr].limit);
+
+/* Update temp_auto_max and temp_auto_range */
+	data->zone[nr].range = RANGE_TO_REG(
+		TEMP_FROM_REG(data->zone[nr].max_desired) -
+		TEMP_FROM_REG(data->zone[nr].limit));
+	lm85_write_value(client, LM85_REG_AFAN_RANGE(nr),
+		((data->zone[nr].range & 0x0f) << 4)
+		| (data->autofan[nr].freq & 0x07));
+
+/* Update temp_auto_hyst and temp_auto_off */
+	data->zone[nr].hyst = HYST_TO_REG(TEMP_FROM_REG(
+		data->zone[nr].limit) - TEMP_FROM_REG(
+		data->zone[nr].off_desired));
+	if ( nr == 0 || nr == 1 ) {
+		lm85_write_value(client, LM85_REG_AFAN_HYST1,
+			(data->zone[0].hyst << 4)
+			| data->zone[1].hyst
+			);
+	} else {
+		lm85_write_value(client, LM85_REG_AFAN_HYST2,
+			(data->zone[2].hyst << 4)
+		);
+	}
+	up(&data->update_lock);
+	return count;
+}
+static ssize_t show_temp_auto_temp_max(struct device *dev, char *buf, int nr)
+{
+	struct lm85_data *data = lm85_update_device(dev);
+	return sprintf(buf,"%d\n", TEMP_FROM_REG(data->zone[nr].limit) +
+		RANGE_FROM_REG(data->zone[nr].range));
+}
+static ssize_t set_temp_auto_temp_max(struct device *dev, const char *buf,
+	size_t count, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct lm85_data *data = i2c_get_clientdata(client);
+	int min;
+	long val = simple_strtol(buf, NULL, 10);
+
+	down(&data->update_lock);
+	min = TEMP_FROM_REG(data->zone[nr].limit);
+	data->zone[nr].max_desired = TEMP_TO_REG(val);
+	data->zone[nr].range = RANGE_TO_REG(
+		val - min);
+	lm85_write_value(client, LM85_REG_AFAN_RANGE(nr),
+		((data->zone[nr].range & 0x0f) << 4)
+		| (data->autofan[nr].freq & 0x07));
+	up(&data->update_lock);
+	return count;
+}
+static ssize_t show_temp_auto_temp_crit(struct device *dev, char *buf, int nr)
+{
+	struct lm85_data *data = lm85_update_device(dev);
+	return sprintf(buf,"%d\n", TEMP_FROM_REG(data->zone[nr].critical));
+}
+static ssize_t set_temp_auto_temp_crit(struct device *dev, const char *buf,
+		size_t count, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct lm85_data *data = i2c_get_clientdata(client);
+	long val = simple_strtol(buf, NULL, 10);
+
+	down(&data->update_lock);
+	data->zone[nr].critical = TEMP_TO_REG(val);
+	lm85_write_value(client, LM85_REG_AFAN_CRITICAL(nr),
+		data->zone[nr].critical);
+	up(&data->update_lock);
+	return count;
+}
+#define temp_auto(offset)						\
+static ssize_t show_temp##offset##_auto_temp_off (struct device *dev,	\
+	char *buf)							\
+{									\
+	return show_temp_auto_temp_off(dev, buf, offset - 1);		\
+}									\
+static ssize_t set_temp##offset##_auto_temp_off (struct device *dev,	\
+	const char *buf, size_t count)					\
+{									\
+	return set_temp_auto_temp_off(dev, buf, count, offset - 1);	\
+}									\
+static ssize_t show_temp##offset##_auto_temp_min (struct device *dev,	\
+	char *buf)							\
+{									\
+	return show_temp_auto_temp_min(dev, buf, offset - 1);		\
+}									\
+static ssize_t set_temp##offset##_auto_temp_min (struct device *dev,	\
+	const char *buf, size_t count)					\
+{									\
+	return set_temp_auto_temp_min(dev, buf, count, offset - 1);	\
+}									\
+static ssize_t show_temp##offset##_auto_temp_max (struct device *dev,	\
+	char *buf)							\
+{									\
+	return show_temp_auto_temp_max(dev, buf, offset - 1);		\
+}									\
+static ssize_t set_temp##offset##_auto_temp_max (struct device *dev,	\
+	const char *buf, size_t count)					\
+{									\
+	return set_temp_auto_temp_max(dev, buf, count, offset - 1);	\
+}									\
+static ssize_t show_temp##offset##_auto_temp_crit (struct device *dev,	\
+	char *buf)							\
+{									\
+	return show_temp_auto_temp_crit(dev, buf, offset - 1);		\
+}									\
+static ssize_t set_temp##offset##_auto_temp_crit (struct device *dev,	\
+	const char *buf, size_t count)					\
+{									\
+	return set_temp_auto_temp_crit(dev, buf, count, offset - 1);	\
+}									\
+static DEVICE_ATTR(temp##offset##_auto_temp_off, S_IRUGO | S_IWUSR,	\
+		show_temp##offset##_auto_temp_off,			\
+		set_temp##offset##_auto_temp_off);			\
+static DEVICE_ATTR(temp##offset##_auto_temp_min, S_IRUGO | S_IWUSR,	\
+		show_temp##offset##_auto_temp_min,			\
+		set_temp##offset##_auto_temp_min);			\
+static DEVICE_ATTR(temp##offset##_auto_temp_max, S_IRUGO | S_IWUSR,	\
+		show_temp##offset##_auto_temp_max,			\
+		set_temp##offset##_auto_temp_max);			\
+static DEVICE_ATTR(temp##offset##_auto_temp_crit, S_IRUGO | S_IWUSR,	\
+		show_temp##offset##_auto_temp_crit,			\
+		set_temp##offset##_auto_temp_crit);
+temp_auto(1);
+temp_auto(2);
+temp_auto(3);
+
+int lm85_attach_adapter(struct i2c_adapter *adapter)
+{
+	if (!(adapter->class & I2C_CLASS_HWMON))
+		return 0;
+	return i2c_detect(adapter, &addr_data, lm85_detect);
+}
+
+int lm85_detect(struct i2c_adapter *adapter, int address,
+		int kind)
+{
+	int company, verstep ;
+	struct i2c_client *new_client = NULL;
+	struct lm85_data *data;
+	int err = 0;
+	const char *type_name = "";
+
+	if (i2c_is_isa_adapter(adapter)) {
+		/* This chip has no ISA interface */
+		goto ERROR0 ;
+	};
+
+	if (!i2c_check_functionality(adapter,
+					I2C_FUNC_SMBUS_BYTE_DATA)) {
+		/* We need to be able to do byte I/O */
+		goto ERROR0 ;
+	};
+
+	/* OK. For now, we presume we have a valid client. We now create the
+	   client structure, even though we cannot fill it completely yet.
+	   But it allows us to access lm85_{read,write}_value. */
+
+	if (!(data = kmalloc(sizeof(struct lm85_data), GFP_KERNEL))) {
+		err = -ENOMEM;
+		goto ERROR0;
+	}
+	memset(data, 0, sizeof(struct lm85_data));
+
+	new_client = &data->client;
+	i2c_set_clientdata(new_client, data);
+	new_client->addr = address;
+	new_client->adapter = adapter;
+	new_client->driver = &lm85_driver;
+	new_client->flags = 0;
+
+	/* Now, we do the remaining detection. */
+
+	company = lm85_read_value(new_client, LM85_REG_COMPANY);
+	verstep = lm85_read_value(new_client, LM85_REG_VERSTEP);
+
+	dev_dbg(&adapter->dev, "Detecting device at %d,0x%02x with"
+		" COMPANY: 0x%02x and VERSTEP: 0x%02x\n",
+		i2c_adapter_id(new_client->adapter), new_client->addr,
+		company, verstep);
+
+	/* If auto-detecting, Determine the chip type. */
+	if (kind <= 0) {
+		dev_dbg(&adapter->dev, "Autodetecting device at %d,0x%02x ...\n",
+			i2c_adapter_id(adapter), address );
+		if( company == LM85_COMPANY_NATIONAL
+		    && verstep == LM85_VERSTEP_LM85C ) {
+			kind = lm85c ;
+		} else if( company == LM85_COMPANY_NATIONAL
+		    && verstep == LM85_VERSTEP_LM85B ) {
+			kind = lm85b ;
+		} else if( company == LM85_COMPANY_NATIONAL
+		    && (verstep & LM85_VERSTEP_VMASK) == LM85_VERSTEP_GENERIC ) {
+			dev_err(&adapter->dev, "Unrecognized version/stepping 0x%02x"
+				" Defaulting to LM85.\n", verstep);
+			kind = any_chip ;
+		} else if( company == LM85_COMPANY_ANALOG_DEV
+		    && verstep == LM85_VERSTEP_ADM1027 ) {
+			kind = adm1027 ;
+		} else if( company == LM85_COMPANY_ANALOG_DEV
+		    && (verstep == LM85_VERSTEP_ADT7463
+			 || verstep == LM85_VERSTEP_ADT7463C) ) {
+			kind = adt7463 ;
+		} else if( company == LM85_COMPANY_ANALOG_DEV
+		    && (verstep & LM85_VERSTEP_VMASK) == LM85_VERSTEP_GENERIC ) {
+			dev_err(&adapter->dev, "Unrecognized version/stepping 0x%02x"
+				" Defaulting to Generic LM85.\n", verstep );
+			kind = any_chip ;
+		} else if( company == LM85_COMPANY_SMSC
+		    && (verstep == LM85_VERSTEP_EMC6D100_A0
+			 || verstep == LM85_VERSTEP_EMC6D100_A1) ) {
+			/* Unfortunately, we can't tell a '100 from a '101
+			 * from the registers.  Since a '101 is a '100
+			 * in a package with fewer pins and therefore no
+			 * 3.3V, 1.5V or 1.8V inputs, perhaps if those
+			 * inputs read 0, then it's a '101.
+			 */
+			kind = emc6d100 ;
+		} else if( company == LM85_COMPANY_SMSC
+		    && verstep == LM85_VERSTEP_EMC6D102) {
+			kind = emc6d102 ;
+		} else if( company == LM85_COMPANY_SMSC
+		    && (verstep & LM85_VERSTEP_VMASK) == LM85_VERSTEP_GENERIC) {
+			dev_err(&adapter->dev, "lm85: Detected SMSC chip\n");
+			dev_err(&adapter->dev, "lm85: Unrecognized version/stepping 0x%02x"
+			    " Defaulting to Generic LM85.\n", verstep );
+			kind = any_chip ;
+		} else if( kind == any_chip
+		    && (verstep & LM85_VERSTEP_VMASK) == LM85_VERSTEP_GENERIC) {
+			dev_err(&adapter->dev, "Generic LM85 Version 6 detected\n");
+			/* Leave kind as "any_chip" */
+		} else {
+			dev_dbg(&adapter->dev, "Autodetection failed\n");
+			/* Not an LM85 ... */
+			if( kind == any_chip ) {  /* User used force=x,y */
+				dev_err(&adapter->dev, "Generic LM85 Version 6 not"
+					" found at %d,0x%02x. Try force_lm85c.\n",
+					i2c_adapter_id(adapter), address );
+			}
+			err = 0 ;
+			goto ERROR1;
+		}
+	}
+
+	/* Fill in the chip specific driver values */
+	if ( kind == any_chip ) {
+		type_name = "lm85";
+	} else if ( kind == lm85b ) {
+		type_name = "lm85b";
+	} else if ( kind == lm85c ) {
+		type_name = "lm85c";
+	} else if ( kind == adm1027 ) {
+		type_name = "adm1027";
+	} else if ( kind == adt7463 ) {
+		type_name = "adt7463";
+	} else if ( kind == emc6d100){
+		type_name = "emc6d100";
+	} else if ( kind == emc6d102 ) {
+		type_name = "emc6d102";
+	}
+	strlcpy(new_client->name, type_name, I2C_NAME_SIZE);
+
+	/* Fill in the remaining client fields */
+	data->type = kind;
+	data->valid = 0;
+	init_MUTEX(&data->update_lock);
+
+	/* Tell the I2C layer a new client has arrived */
+	if ((err = i2c_attach_client(new_client)))
+		goto ERROR1;
+
+	/* Set the VRM version */
+	data->vrm = i2c_which_vrm();
+
+	/* Initialize the LM85 chip */
+	lm85_init_client(new_client);
+
+	/* Register sysfs hooks */
+	device_create_file(&new_client->dev, &dev_attr_fan1_input);
+	device_create_file(&new_client->dev, &dev_attr_fan2_input);
+	device_create_file(&new_client->dev, &dev_attr_fan3_input);
+	device_create_file(&new_client->dev, &dev_attr_fan4_input);
+	device_create_file(&new_client->dev, &dev_attr_fan1_min);
+	device_create_file(&new_client->dev, &dev_attr_fan2_min);
+	device_create_file(&new_client->dev, &dev_attr_fan3_min);
+	device_create_file(&new_client->dev, &dev_attr_fan4_min);
+	device_create_file(&new_client->dev, &dev_attr_pwm1);
+	device_create_file(&new_client->dev, &dev_attr_pwm2);
+	device_create_file(&new_client->dev, &dev_attr_pwm3);
+	device_create_file(&new_client->dev, &dev_attr_pwm1_enable);
+	device_create_file(&new_client->dev, &dev_attr_pwm2_enable);
+	device_create_file(&new_client->dev, &dev_attr_pwm3_enable);
+	device_create_file(&new_client->dev, &dev_attr_in0_input);
+	device_create_file(&new_client->dev, &dev_attr_in1_input);
+	device_create_file(&new_client->dev, &dev_attr_in2_input);
+	device_create_file(&new_client->dev, &dev_attr_in3_input);
+	device_create_file(&new_client->dev, &dev_attr_in4_input);
+	device_create_file(&new_client->dev, &dev_attr_in0_min);
+	device_create_file(&new_client->dev, &dev_attr_in1_min);
+	device_create_file(&new_client->dev, &dev_attr_in2_min);
+	device_create_file(&new_client->dev, &dev_attr_in3_min);
+	device_create_file(&new_client->dev, &dev_attr_in4_min);
+	device_create_file(&new_client->dev, &dev_attr_in0_max);
+	device_create_file(&new_client->dev, &dev_attr_in1_max);
+	device_create_file(&new_client->dev, &dev_attr_in2_max);
+	device_create_file(&new_client->dev, &dev_attr_in3_max);
+	device_create_file(&new_client->dev, &dev_attr_in4_max);
+	device_create_file(&new_client->dev, &dev_attr_temp1_input);
+	device_create_file(&new_client->dev, &dev_attr_temp2_input);
+	device_create_file(&new_client->dev, &dev_attr_temp3_input);
+	device_create_file(&new_client->dev, &dev_attr_temp1_min);
+	device_create_file(&new_client->dev, &dev_attr_temp2_min);
+	device_create_file(&new_client->dev, &dev_attr_temp3_min);
+	device_create_file(&new_client->dev, &dev_attr_temp1_max);
+	device_create_file(&new_client->dev, &dev_attr_temp2_max);
+	device_create_file(&new_client->dev, &dev_attr_temp3_max);
+	device_create_file(&new_client->dev, &dev_attr_vrm);
+	device_create_file(&new_client->dev, &dev_attr_cpu0_vid);
+	device_create_file(&new_client->dev, &dev_attr_alarms);
+	device_create_file(&new_client->dev, &dev_attr_pwm1_auto_channels);
+	device_create_file(&new_client->dev, &dev_attr_pwm2_auto_channels);
+	device_create_file(&new_client->dev, &dev_attr_pwm3_auto_channels);
+	device_create_file(&new_client->dev, &dev_attr_pwm1_auto_pwm_min);
+	device_create_file(&new_client->dev, &dev_attr_pwm2_auto_pwm_min);
+	device_create_file(&new_client->dev, &dev_attr_pwm3_auto_pwm_min);
+	device_create_file(&new_client->dev, &dev_attr_pwm1_auto_pwm_minctl);
+	device_create_file(&new_client->dev, &dev_attr_pwm2_auto_pwm_minctl);
+	device_create_file(&new_client->dev, &dev_attr_pwm3_auto_pwm_minctl);
+	device_create_file(&new_client->dev, &dev_attr_pwm1_auto_pwm_freq);
+	device_create_file(&new_client->dev, &dev_attr_pwm2_auto_pwm_freq);
+	device_create_file(&new_client->dev, &dev_attr_pwm3_auto_pwm_freq);
+	device_create_file(&new_client->dev, &dev_attr_temp1_auto_temp_off);
+	device_create_file(&new_client->dev, &dev_attr_temp2_auto_temp_off);
+	device_create_file(&new_client->dev, &dev_attr_temp3_auto_temp_off);
+	device_create_file(&new_client->dev, &dev_attr_temp1_auto_temp_min);
+	device_create_file(&new_client->dev, &dev_attr_temp2_auto_temp_min);
+	device_create_file(&new_client->dev, &dev_attr_temp3_auto_temp_min);
+	device_create_file(&new_client->dev, &dev_attr_temp1_auto_temp_max);
+	device_create_file(&new_client->dev, &dev_attr_temp2_auto_temp_max);
+	device_create_file(&new_client->dev, &dev_attr_temp3_auto_temp_max);
+	device_create_file(&new_client->dev, &dev_attr_temp1_auto_temp_crit);
+	device_create_file(&new_client->dev, &dev_attr_temp2_auto_temp_crit);
+	device_create_file(&new_client->dev, &dev_attr_temp3_auto_temp_crit);
+
+	return 0;
+
+	/* Error out and cleanup code */
+    ERROR1:
+	kfree(data);
+    ERROR0:
+	return err;
+}
+
+int lm85_detach_client(struct i2c_client *client)
+{
+	i2c_detach_client(client);
+	kfree(i2c_get_clientdata(client));
+	return 0;
+}
+
+
+int lm85_read_value(struct i2c_client *client, u8 reg)
+{
+	int res;
+
+	/* What size location is it? */
+	switch( reg ) {
+	case LM85_REG_FAN(0) :  /* Read WORD data */
+	case LM85_REG_FAN(1) :
+	case LM85_REG_FAN(2) :
+	case LM85_REG_FAN(3) :
+	case LM85_REG_FAN_MIN(0) :
+	case LM85_REG_FAN_MIN(1) :
+	case LM85_REG_FAN_MIN(2) :
+	case LM85_REG_FAN_MIN(3) :
+	case LM85_REG_ALARM1 :	/* Read both bytes at once */
+		res = i2c_smbus_read_byte_data(client, reg) & 0xff ;
+		res |= i2c_smbus_read_byte_data(client, reg+1) << 8 ;
+		break ;
+	case ADT7463_REG_TMIN_CTL1 :  /* Read WORD MSB, LSB */
+		res = i2c_smbus_read_byte_data(client, reg) << 8 ;
+		res |= i2c_smbus_read_byte_data(client, reg+1) & 0xff ;
+		break ;
+	default:	/* Read BYTE data */
+		res = i2c_smbus_read_byte_data(client, reg);
+		break ;
+	}
+
+	return res ;
+}
+
+int lm85_write_value(struct i2c_client *client, u8 reg, int value)
+{
+	int res ;
+
+	switch( reg ) {
+	case LM85_REG_FAN(0) :  /* Write WORD data */
+	case LM85_REG_FAN(1) :
+	case LM85_REG_FAN(2) :
+	case LM85_REG_FAN(3) :
+	case LM85_REG_FAN_MIN(0) :
+	case LM85_REG_FAN_MIN(1) :
+	case LM85_REG_FAN_MIN(2) :
+	case LM85_REG_FAN_MIN(3) :
+	/* NOTE: ALARM is read only, so not included here */
+		res = i2c_smbus_write_byte_data(client, reg, value & 0xff) ;
+		res |= i2c_smbus_write_byte_data(client, reg+1, (value>>8) & 0xff) ;
+		break ;
+	case ADT7463_REG_TMIN_CTL1 :  /* Write WORD MSB, LSB */
+		res = i2c_smbus_write_byte_data(client, reg, (value>>8) & 0xff);
+		res |= i2c_smbus_write_byte_data(client, reg+1, value & 0xff) ;
+		break ;
+	default:	/* Write BYTE data */
+		res = i2c_smbus_write_byte_data(client, reg, value);
+		break ;
+	}
+
+	return res ;
+}
+
+void lm85_init_client(struct i2c_client *client)
+{
+	int value;
+	struct lm85_data *data = i2c_get_clientdata(client);
+
+	dev_dbg(&client->dev, "Initializing device\n");
+
+	/* Warn if part was not "READY" */
+	value = lm85_read_value(client, LM85_REG_CONFIG);
+	dev_dbg(&client->dev, "LM85_REG_CONFIG is: 0x%02x\n", value);
+	if( value & 0x02 ) {
+		dev_err(&client->dev, "Client (%d,0x%02x) config is locked.\n",
+			    i2c_adapter_id(client->adapter), client->addr );
+	};
+	if( ! (value & 0x04) ) {
+		dev_err(&client->dev, "Client (%d,0x%02x) is not ready.\n",
+			    i2c_adapter_id(client->adapter), client->addr );
+	};
+	if( value & 0x10
+	    && ( data->type == adm1027
+		|| data->type == adt7463 ) ) {
+		dev_err(&client->dev, "Client (%d,0x%02x) VxI mode is set.  "
+			"Please report this to the lm85 maintainer.\n",
+			    i2c_adapter_id(client->adapter), client->addr );
+	};
+
+	/* WE INTENTIONALLY make no changes to the limits,
+	 *   offsets, pwms, fans and zones.  If they were
+	 *   configured, we don't want to mess with them.
+	 *   If they weren't, the default is 100% PWM, no
+	 *   control and will suffice until 'sensors -s'
+	 *   can be run by the user.
+	 */
+
+	/* Start monitoring */
+	value = lm85_read_value(client, LM85_REG_CONFIG);
+	/* Try to clear LOCK, Set START, save everything else */
+	value = (value & ~ 0x02) | 0x01 ;
+	dev_dbg(&client->dev, "Setting CONFIG to: 0x%02x\n", value);
+	lm85_write_value(client, LM85_REG_CONFIG, value);
+}
+
+static struct lm85_data *lm85_update_device(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct lm85_data *data = i2c_get_clientdata(client);
+	int i;
+
+	down(&data->update_lock);
+
+	if ( !data->valid ||
+	     time_after(jiffies, data->last_reading + LM85_DATA_INTERVAL) ) {
+		/* Things that change quickly */
+		dev_dbg(&client->dev, "Reading sensor values\n");
+		
+		/* Have to read extended bits first to "freeze" the
+		 * more significant bits that are read later.
+		 */
+		if ( (data->type == adm1027) || (data->type == adt7463) ) {
+			int ext1 = lm85_read_value(client,
+						   ADM1027_REG_EXTEND_ADC1);
+			int ext2 =  lm85_read_value(client,
+						    ADM1027_REG_EXTEND_ADC2);
+			int val = (ext1 << 8) + ext2;
+
+			for(i = 0; i <= 4; i++)
+				data->in_ext[i] = (val>>(i * 2))&0x03;
+
+			for(i = 0; i <= 2; i++)
+				data->temp_ext[i] = (val>>((i + 5) * 2))&0x03;
+		}
+
+		/* adc_scale is 2^(number of LSBs). There are 4 extra bits in
+		   the emc6d102 and 2 in the adt7463 and adm1027. In all
+		   other chips ext is always 0 and the value of scale is
+		   irrelevant. So it is left in 4*/
+		data->adc_scale = (data->type == emc6d102 ) ? 16 : 4;
+
+		for (i = 0; i <= 4; ++i) {
+			data->in[i] =
+			    lm85_read_value(client, LM85_REG_IN(i));
+		}
+
+		for (i = 0; i <= 3; ++i) {
+			data->fan[i] =
+			    lm85_read_value(client, LM85_REG_FAN(i));
+		}
+
+		for (i = 0; i <= 2; ++i) {
+			data->temp[i] =
+			    lm85_read_value(client, LM85_REG_TEMP(i));
+		}
+
+		for (i = 0; i <= 2; ++i) {
+			data->pwm[i] =
+			    lm85_read_value(client, LM85_REG_PWM(i));
+		}
+
+		data->alarms = lm85_read_value(client, LM85_REG_ALARM1);
+
+		if ( data->type == adt7463 ) {
+			if( data->therm_total < ULONG_MAX - 256 ) {
+			    data->therm_total +=
+				lm85_read_value(client, ADT7463_REG_THERM );
+			}
+		} else if ( data->type == emc6d100 ) {
+			/* Three more voltage sensors */
+			for (i = 5; i <= 7; ++i) {
+				data->in[i] =
+					lm85_read_value(client, EMC6D100_REG_IN(i));
+			}
+			/* More alarm bits */
+			data->alarms |=
+				lm85_read_value(client, EMC6D100_REG_ALARM3) << 16;
+		} else if (data->type == emc6d102 ) {
+			/* Have to read LSB bits after the MSB ones because
+			   the reading of the MSB bits has frozen the
+			   LSBs (backward from the ADM1027).
+			 */
+			int ext1 = lm85_read_value(client,
+						   EMC6D102_REG_EXTEND_ADC1);
+			int ext2 = lm85_read_value(client,
+						   EMC6D102_REG_EXTEND_ADC2);
+			int ext3 = lm85_read_value(client,
+						   EMC6D102_REG_EXTEND_ADC3);
+			int ext4 = lm85_read_value(client,
+						   EMC6D102_REG_EXTEND_ADC4);
+			data->in_ext[0] = ext3 & 0x0f;
+			data->in_ext[1] = ext4 & 0x0f;
+			data->in_ext[2] = (ext4 >> 4) & 0x0f;
+			data->in_ext[3] = (ext3 >> 4) & 0x0f;
+			data->in_ext[4] = (ext2 >> 4) & 0x0f;
+
+			data->temp_ext[0] = ext1 & 0x0f;
+			data->temp_ext[1] = ext2 & 0x0f;
+			data->temp_ext[2] = (ext1 >> 4) & 0x0f;
+		}
+
+		data->last_reading = jiffies ;
+	};  /* last_reading */
+
+	if ( !data->valid ||
+	     time_after(jiffies, data->last_config + LM85_CONFIG_INTERVAL) ) {
+		/* Things that don't change often */
+		dev_dbg(&client->dev, "Reading config values\n");
+
+		for (i = 0; i <= 4; ++i) {
+			data->in_min[i] =
+			    lm85_read_value(client, LM85_REG_IN_MIN(i));
+			data->in_max[i] =
+			    lm85_read_value(client, LM85_REG_IN_MAX(i));
+		}
+
+		if ( data->type == emc6d100 ) {
+			for (i = 5; i <= 7; ++i) {
+				data->in_min[i] =
+					lm85_read_value(client, EMC6D100_REG_IN_MIN(i));
+				data->in_max[i] =
+					lm85_read_value(client, EMC6D100_REG_IN_MAX(i));
+			}
+		}
+
+		for (i = 0; i <= 3; ++i) {
+			data->fan_min[i] =
+			    lm85_read_value(client, LM85_REG_FAN_MIN(i));
+		}
+
+		for (i = 0; i <= 2; ++i) {
+			data->temp_min[i] =
+			    lm85_read_value(client, LM85_REG_TEMP_MIN(i));
+			data->temp_max[i] =
+			    lm85_read_value(client, LM85_REG_TEMP_MAX(i));
+		}
+
+		data->vid = lm85_read_value(client, LM85_REG_VID);
+
+		for (i = 0; i <= 2; ++i) {
+			int val ;
+			data->autofan[i].config =
+			    lm85_read_value(client, LM85_REG_AFAN_CONFIG(i));
+			val = lm85_read_value(client, LM85_REG_AFAN_RANGE(i));
+			data->autofan[i].freq = val & 0x07 ;
+			data->zone[i].range = (val >> 4) & 0x0f ;
+			data->autofan[i].min_pwm =
+			    lm85_read_value(client, LM85_REG_AFAN_MINPWM(i));
+			data->zone[i].limit =
+			    lm85_read_value(client, LM85_REG_AFAN_LIMIT(i));
+			data->zone[i].critical =
+			    lm85_read_value(client, LM85_REG_AFAN_CRITICAL(i));
+		}
+
+		i = lm85_read_value(client, LM85_REG_AFAN_SPIKE1);
+		data->smooth[0] = i & 0x0f ;
+		data->syncpwm3 = i & 0x10 ;  /* Save PWM3 config */
+		data->autofan[0].min_off = (i & 0x20) != 0 ;
+		data->autofan[1].min_off = (i & 0x40) != 0 ;
+		data->autofan[2].min_off = (i & 0x80) != 0 ;
+		i = lm85_read_value(client, LM85_REG_AFAN_SPIKE2);
+		data->smooth[1] = (i>>4) & 0x0f ;
+		data->smooth[2] = i & 0x0f ;
+
+		i = lm85_read_value(client, LM85_REG_AFAN_HYST1);
+		data->zone[0].hyst = (i>>4) & 0x0f ;
+		data->zone[1].hyst = i & 0x0f ;
+
+		i = lm85_read_value(client, LM85_REG_AFAN_HYST2);
+		data->zone[2].hyst = (i>>4) & 0x0f ;
+
+		if ( (data->type == lm85b) || (data->type == lm85c) ) {
+			data->tach_mode = lm85_read_value(client,
+				LM85_REG_TACH_MODE );
+			data->spinup_ctl = lm85_read_value(client,
+				LM85_REG_SPINUP_CTL );
+		} else if ( (data->type == adt7463) || (data->type == adm1027) ) {
+			if ( data->type == adt7463 ) {
+				for (i = 0; i <= 2; ++i) {
+				    data->oppoint[i] = lm85_read_value(client,
+					ADT7463_REG_OPPOINT(i) );
+				}
+				data->tmin_ctl = lm85_read_value(client,
+					ADT7463_REG_TMIN_CTL1 );
+				data->therm_limit = lm85_read_value(client,
+					ADT7463_REG_THERM_LIMIT );
+			}
+			for (i = 0; i <= 2; ++i) {
+			    data->temp_offset[i] = lm85_read_value(client,
+				ADM1027_REG_TEMP_OFFSET(i) );
+			}
+			data->tach_mode = lm85_read_value(client,
+				ADM1027_REG_CONFIG3 );
+			data->fan_ppr = lm85_read_value(client,
+				ADM1027_REG_FAN_PPR );
+		}
+	
+		data->last_config = jiffies;
+	};  /* last_config */
+
+	data->valid = 1;
+
+	up(&data->update_lock);
+
+	return data;
+}
+
+
+static int __init sm_lm85_init(void)
+{
+	return i2c_add_driver(&lm85_driver);
+}
+
+static void  __exit sm_lm85_exit(void)
+{
+	i2c_del_driver(&lm85_driver);
+}
+
+/* Thanks to Richard Barrington for adding the LM85 to sensors-detect.
+ * Thanks to Margit Schubert-While <margitsw@t-online.de> for help with
+ *     post 2.7.0 CVS changes.
+ */
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Philip Pokorny <ppokorny@penguincomputing.com>, Margit Schubert-While <margitsw@t-online.de>, Justin Thiessen <jthiessen@penguincomputing.com");
+MODULE_DESCRIPTION("LM85-B, LM85-C driver");
+
+module_init(sm_lm85_init);
+module_exit(sm_lm85_exit);
diff --git a/drivers/i2c/chips/lm87.c b/drivers/i2c/chips/lm87.c
new file mode 100644
index 00000000000..98cabd66506
--- /dev/null
+++ b/drivers/i2c/chips/lm87.c
@@ -0,0 +1,829 @@
+/*
+ * lm87.c
+ *
+ * Copyright (C) 2000       Frodo Looijaard <frodol@dds.nl>
+ *                          Philip Edelbrock <phil@netroedge.com>
+ *                          Stephen Rousset <stephen.rousset@rocketlogix.com>
+ *                          Dan Eaton <dan.eaton@rocketlogix.com>
+ * Copyright (C) 2004       Jean Delvare <khali@linux-fr.org>
+ *
+ * Original port to Linux 2.6 by Jeff Oliver.
+ *
+ * The LM87 is a sensor chip made by National Semiconductor. It monitors up
+ * to 8 voltages (including its own power source), up to three temperatures
+ * (its own plus up to two external ones) and up to two fans. The default
+ * configuration is 6 voltages, two temperatures and two fans (see below).
+ * Voltages are scaled internally with ratios such that the nominal value of
+ * each voltage correspond to a register value of 192 (which means a
+ * resolution of about 0.5% of the nominal value). Temperature values are
+ * reported with a 1 deg resolution and a 3-4 deg accuracy. Complete
+ * datasheet can be obtained from National's website at:
+ *   http://www.national.com/pf/LM/LM87.html
+ *
+ * Some functions share pins, so not all functions are available at the same
+ * time. Which are depends on the hardware setup. This driver assumes that
+ * the BIOS configured the chip correctly. In that respect, it  differs from
+ * the original driver (from lm_sensors for Linux 2.4), which would force the
+ * LM87 to an arbitrary, compile-time chosen mode, regardless of the actual
+ * chipset wiring.
+ * For reference, here is the list of exclusive functions:
+ *  - in0+in5 (default) or temp3
+ *  - fan1 (default) or in6
+ *  - fan2 (default) or in7
+ *  - VID lines (default) or IRQ lines (not handled by this driver)
+ *
+ * The LM87 additionally features an analog output, supposedly usable to
+ * control the speed of a fan. All new chips use pulse width modulation
+ * instead. The LM87 is the only hardware monitoring chipset I know of
+ * which uses amplitude modulation. Be careful when using this feature.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/jiffies.h>
+#include <linux/i2c.h>
+#include <linux/i2c-sensor.h>
+#include <linux/i2c-vid.h>
+
+/*
+ * Addresses to scan
+ * LM87 has three possible addresses: 0x2c, 0x2d and 0x2e.
+ */
+
+static unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, I2C_CLIENT_END };
+static unsigned int normal_isa[] = { I2C_CLIENT_ISA_END };
+
+/*
+ * Insmod parameters
+ */
+
+SENSORS_INSMOD_1(lm87);
+
+/*
+ * The LM87 registers
+ */
+
+/* nr in 0..5 */
+#define LM87_REG_IN(nr)			(0x20 + (nr))
+#define LM87_REG_IN_MAX(nr)		(0x2B + (nr) * 2)
+#define LM87_REG_IN_MIN(nr)		(0x2C + (nr) * 2)
+/* nr in 0..1 */
+#define LM87_REG_AIN(nr)		(0x28 + (nr))
+#define LM87_REG_AIN_MIN(nr)		(0x1A + (nr))
+#define LM87_REG_AIN_MAX(nr)		(0x3B + (nr))
+
+static u8 LM87_REG_TEMP[3] = { 0x27, 0x26, 0x20 };
+static u8 LM87_REG_TEMP_HIGH[3] = { 0x39, 0x37, 0x2B };
+static u8 LM87_REG_TEMP_LOW[3] = { 0x3A, 0x38, 0x2C };
+
+#define LM87_REG_TEMP_HW_INT_LOCK	0x13
+#define LM87_REG_TEMP_HW_EXT_LOCK	0x14
+#define LM87_REG_TEMP_HW_INT		0x17
+#define LM87_REG_TEMP_HW_EXT		0x18
+
+/* nr in 0..1 */
+#define LM87_REG_FAN(nr)		(0x28 + (nr))
+#define LM87_REG_FAN_MIN(nr)		(0x3B + (nr))
+#define LM87_REG_AOUT			0x19
+
+#define LM87_REG_CONFIG			0x40
+#define LM87_REG_CHANNEL_MODE		0x16
+#define LM87_REG_VID_FAN_DIV		0x47
+#define LM87_REG_VID4			0x49
+
+#define LM87_REG_ALARMS1		0x41
+#define LM87_REG_ALARMS2		0x42
+
+#define LM87_REG_COMPANY_ID		0x3E
+#define LM87_REG_REVISION		0x3F
+
+/*
+ * Conversions and various macros
+ * The LM87 uses signed 8-bit values for temperatures.
+ */
+
+#define IN_FROM_REG(reg,scale)	(((reg) * (scale) + 96) / 192)
+#define IN_TO_REG(val,scale)	((val) <= 0 ? 0 : \
+				 (val) * 192 >= (scale) * 255 ? 255 : \
+				 ((val) * 192 + (scale)/2) / (scale))
+
+#define TEMP_FROM_REG(reg)	((reg) * 1000)
+#define TEMP_TO_REG(val)	((val) <= -127500 ? -128 : \
+				 (val) >= 126500 ? 127 : \
+				 (((val) < 0 ? (val)-500 : (val)+500) / 1000))
+
+#define FAN_FROM_REG(reg,div)	((reg) == 255 || (reg) == 0 ? 0 : \
+				 1350000 + (reg)*(div) / 2) / ((reg)*(div))
+#define FAN_TO_REG(val,div)	((val)*(div) * 255 <= 1350000 ? 255 : \
+				 (1350000 + (val)*(div) / 2) / ((val)*(div)))
+
+#define FAN_DIV_FROM_REG(reg)	(1 << (reg))
+
+/* analog out is 9.80mV/LSB */
+#define AOUT_FROM_REG(reg)	(((reg) * 98 + 5) / 10)
+#define AOUT_TO_REG(val)	((val) <= 0 ? 0 : \
+				 (val) >= 2500 ? 255 : \
+				 ((val) * 10 + 49) / 98)
+
+/* nr in 0..1 */
+#define CHAN_NO_FAN(nr)		(1 << (nr))
+#define CHAN_TEMP3		(1 << 2)
+#define CHAN_VCC_5V		(1 << 3)
+#define CHAN_NO_VID		(1 << 8)
+
+/*
+ * Functions declaration
+ */
+
+static int lm87_attach_adapter(struct i2c_adapter *adapter);
+static int lm87_detect(struct i2c_adapter *adapter, int address, int kind);
+static void lm87_init_client(struct i2c_client *client);
+static int lm87_detach_client(struct i2c_client *client);
+static struct lm87_data *lm87_update_device(struct device *dev);
+
+/*
+ * Driver data (common to all clients)
+ */
+
+static struct i2c_driver lm87_driver = {
+	.owner		= THIS_MODULE,
+	.name		= "lm87",
+	.id		= I2C_DRIVERID_LM87,
+	.flags		= I2C_DF_NOTIFY,
+	.attach_adapter	= lm87_attach_adapter,
+	.detach_client	= lm87_detach_client,
+};
+
+/*
+ * Client data (each client gets its own)
+ */
+
+struct lm87_data {
+	struct i2c_client client;
+	struct semaphore update_lock;
+	char valid; /* zero until following fields are valid */
+	unsigned long last_updated; /* In jiffies */
+
+	u8 channel;		/* register value */
+
+	u8 in[8];		/* register value */
+	u8 in_max[8];		/* register value */
+	u8 in_min[8];		/* register value */
+	u16 in_scale[8];
+
+	s8 temp[3];		/* register value */
+	s8 temp_high[3];	/* register value */
+	s8 temp_low[3];		/* register value */
+	s8 temp_crit_int;	/* min of two register values */
+	s8 temp_crit_ext;	/* min of two register values */
+
+	u8 fan[2];		/* register value */
+	u8 fan_min[2];		/* register value */
+	u8 fan_div[2];		/* register value, shifted right */
+	u8 aout;		/* register value */
+
+	u16 alarms;		/* register values, combined */
+	u8 vid;			/* register values, combined */
+	u8 vrm;
+};
+
+/*
+ * Sysfs stuff
+ */
+
+static inline int lm87_read_value(struct i2c_client *client, u8 reg)
+{
+	return i2c_smbus_read_byte_data(client, reg);
+}
+
+static inline int lm87_write_value(struct i2c_client *client, u8 reg, u8 value)
+{
+	return i2c_smbus_write_byte_data(client, reg, value);
+}
+
+#define show_in(offset) \
+static ssize_t show_in##offset##_input(struct device *dev, char *buf) \
+{ \
+	struct lm87_data *data = lm87_update_device(dev); \
+	return sprintf(buf, "%u\n", IN_FROM_REG(data->in[offset], \
+		       data->in_scale[offset])); \
+} \
+static ssize_t show_in##offset##_min(struct device *dev, char *buf) \
+{ \
+	struct lm87_data *data = lm87_update_device(dev); \
+	return sprintf(buf, "%u\n", IN_FROM_REG(data->in_min[offset], \
+		       data->in_scale[offset])); \
+} \
+static ssize_t show_in##offset##_max(struct device *dev, char *buf) \
+{ \
+	struct lm87_data *data = lm87_update_device(dev); \
+	return sprintf(buf, "%u\n", IN_FROM_REG(data->in_max[offset], \
+		       data->in_scale[offset])); \
+} \
+static DEVICE_ATTR(in##offset##_input, S_IRUGO, \
+		show_in##offset##_input, NULL);
+show_in(0);
+show_in(1);
+show_in(2);
+show_in(3);
+show_in(4);
+show_in(5);
+show_in(6);
+show_in(7);
+
+static void set_in_min(struct device *dev, const char *buf, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct lm87_data *data = i2c_get_clientdata(client);
+	long val = simple_strtol(buf, NULL, 10);
+
+	down(&data->update_lock);
+	data->in_min[nr] = IN_TO_REG(val, data->in_scale[nr]);
+	lm87_write_value(client, nr<6 ? LM87_REG_IN_MIN(nr) :
+			 LM87_REG_AIN_MIN(nr-6), data->in_min[nr]);
+	up(&data->update_lock);
+}
+
+static void set_in_max(struct device *dev, const char *buf, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct lm87_data *data = i2c_get_clientdata(client);
+	long val = simple_strtol(buf, NULL, 10);
+
+	down(&data->update_lock);
+	data->in_max[nr] = IN_TO_REG(val, data->in_scale[nr]);
+	lm87_write_value(client, nr<6 ? LM87_REG_IN_MAX(nr) :
+			 LM87_REG_AIN_MAX(nr-6), data->in_max[nr]);
+	up(&data->update_lock);
+}
+
+#define set_in(offset) \
+static ssize_t set_in##offset##_min(struct device *dev, \
+		const char *buf, size_t count) \
+{ \
+	set_in_min(dev, buf, offset); \
+	return count; \
+} \
+static ssize_t set_in##offset##_max(struct device *dev, \
+		const char *buf, size_t count) \
+{ \
+	set_in_max(dev, buf, offset); \
+	return count; \
+} \
+static DEVICE_ATTR(in##offset##_min, S_IRUGO | S_IWUSR, \
+		show_in##offset##_min, set_in##offset##_min); \
+static DEVICE_ATTR(in##offset##_max, S_IRUGO | S_IWUSR, \
+		show_in##offset##_max, set_in##offset##_max);
+set_in(0);
+set_in(1);
+set_in(2);
+set_in(3);
+set_in(4);
+set_in(5);
+set_in(6);
+set_in(7);
+
+#define show_temp(offset) \
+static ssize_t show_temp##offset##_input(struct device *dev, char *buf) \
+{ \
+	struct lm87_data *data = lm87_update_device(dev); \
+	return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp[offset-1])); \
+} \
+static ssize_t show_temp##offset##_low(struct device *dev, char *buf) \
+{ \
+	struct lm87_data *data = lm87_update_device(dev); \
+	return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_low[offset-1])); \
+} \
+static ssize_t show_temp##offset##_high(struct device *dev, char *buf) \
+{ \
+	struct lm87_data *data = lm87_update_device(dev); \
+	return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_high[offset-1])); \
+}\
+static DEVICE_ATTR(temp##offset##_input, S_IRUGO, \
+		show_temp##offset##_input, NULL);
+show_temp(1);
+show_temp(2);
+show_temp(3);
+
+static void set_temp_low(struct device *dev, const char *buf, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct lm87_data *data = i2c_get_clientdata(client);
+	long val = simple_strtol(buf, NULL, 10);
+
+	down(&data->update_lock);
+	data->temp_low[nr] = TEMP_TO_REG(val);
+	lm87_write_value(client, LM87_REG_TEMP_LOW[nr], data->temp_low[nr]);
+	up(&data->update_lock);
+}
+
+static void set_temp_high(struct device *dev, const char *buf, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct lm87_data *data = i2c_get_clientdata(client);
+	long val = simple_strtol(buf, NULL, 10);
+
+	down(&data->update_lock);
+	data->temp_high[nr] = TEMP_TO_REG(val);
+	lm87_write_value(client, LM87_REG_TEMP_HIGH[nr], data->temp_high[nr]);
+	up(&data->update_lock);
+}
+
+#define set_temp(offset) \
+static ssize_t set_temp##offset##_low(struct device *dev, \
+		const char *buf, size_t count) \
+{ \
+	set_temp_low(dev, buf, offset-1); \
+	return count; \
+} \
+static ssize_t set_temp##offset##_high(struct device *dev, \
+		const char *buf, size_t count) \
+{ \
+	set_temp_high(dev, buf, offset-1); \
+	return count; \
+} \
+static DEVICE_ATTR(temp##offset##_max, S_IRUGO | S_IWUSR, \
+		show_temp##offset##_high, set_temp##offset##_high); \
+static DEVICE_ATTR(temp##offset##_min, S_IRUGO | S_IWUSR, \
+		show_temp##offset##_low, set_temp##offset##_low);
+set_temp(1);
+set_temp(2);
+set_temp(3);
+
+static ssize_t show_temp_crit_int(struct device *dev, char *buf)
+{
+	struct lm87_data *data = lm87_update_device(dev);
+	return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_crit_int));
+}
+
+static ssize_t show_temp_crit_ext(struct device *dev, char *buf)
+{
+	struct lm87_data *data = lm87_update_device(dev);
+	return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_crit_ext));
+}
+
+static DEVICE_ATTR(temp1_crit, S_IRUGO, show_temp_crit_int, NULL);
+static DEVICE_ATTR(temp2_crit, S_IRUGO, show_temp_crit_ext, NULL);
+static DEVICE_ATTR(temp3_crit, S_IRUGO, show_temp_crit_ext, NULL);
+
+#define show_fan(offset) \
+static ssize_t show_fan##offset##_input(struct device *dev, char *buf) \
+{ \
+	struct lm87_data *data = lm87_update_device(dev); \
+	return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan[offset-1], \
+		       FAN_DIV_FROM_REG(data->fan_div[offset-1]))); \
+} \
+static ssize_t show_fan##offset##_min(struct device *dev, char *buf) \
+{ \
+	struct lm87_data *data = lm87_update_device(dev); \
+	return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan_min[offset-1], \
+		       FAN_DIV_FROM_REG(data->fan_div[offset-1]))); \
+} \
+static ssize_t show_fan##offset##_div(struct device *dev, char *buf) \
+{ \
+	struct lm87_data *data = lm87_update_device(dev); \
+	return sprintf(buf, "%d\n", FAN_DIV_FROM_REG(data->fan_div[offset-1])); \
+} \
+static DEVICE_ATTR(fan##offset##_input, S_IRUGO, \
+		show_fan##offset##_input, NULL);
+show_fan(1);
+show_fan(2);
+
+static void set_fan_min(struct device *dev, const char *buf, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct lm87_data *data = i2c_get_clientdata(client);
+	long val = simple_strtol(buf, NULL, 10);
+
+	down(&data->update_lock);
+	data->fan_min[nr] = FAN_TO_REG(val,
+			    FAN_DIV_FROM_REG(data->fan_div[nr]));
+	lm87_write_value(client, LM87_REG_FAN_MIN(nr), data->fan_min[nr]);
+	up(&data->update_lock);
+}
+
+/* Note: we save and restore the fan minimum here, because its value is
+   determined in part by the fan clock divider.  This follows the principle
+   of least suprise; the user doesn't expect the fan minimum to change just
+   because the divider changed. */
+static ssize_t set_fan_div(struct device *dev, const char *buf,
+		size_t count, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct lm87_data *data = i2c_get_clientdata(client);
+	long val = simple_strtol(buf, NULL, 10);
+	unsigned long min;
+	u8 reg;
+
+	down(&data->update_lock);
+	min = FAN_FROM_REG(data->fan_min[nr],
+			   FAN_DIV_FROM_REG(data->fan_div[nr]));
+
+	switch (val) {
+	case 1: data->fan_div[nr] = 0; break;
+	case 2: data->fan_div[nr] = 1; break;
+	case 4: data->fan_div[nr] = 2; break;
+	case 8: data->fan_div[nr] = 3; break;
+	default:
+		up(&data->update_lock);
+		return -EINVAL;
+	}
+
+	reg = lm87_read_value(client, LM87_REG_VID_FAN_DIV);
+	switch (nr) {
+	case 0:
+	    reg = (reg & 0xCF) | (data->fan_div[0] << 4);
+	    break;
+	case 1:
+	    reg = (reg & 0x3F) | (data->fan_div[1] << 6);
+	    break;
+	}
+	lm87_write_value(client, LM87_REG_VID_FAN_DIV, reg);
+
+	data->fan_min[nr] = FAN_TO_REG(min, val);
+	lm87_write_value(client, LM87_REG_FAN_MIN(nr),
+			 data->fan_min[nr]);
+	up(&data->update_lock);
+
+	return count;
+}
+
+#define set_fan(offset) \
+static ssize_t set_fan##offset##_min(struct device *dev, const char *buf, \
+		size_t count) \
+{ \
+	set_fan_min(dev, buf, offset-1); \
+	return count; \
+} \
+static ssize_t set_fan##offset##_div(struct device *dev, const char *buf, \
+		size_t count) \
+{ \
+	return set_fan_div(dev, buf, count, offset-1); \
+} \
+static DEVICE_ATTR(fan##offset##_min, S_IRUGO | S_IWUSR, \
+		show_fan##offset##_min, set_fan##offset##_min); \
+static DEVICE_ATTR(fan##offset##_div, S_IRUGO | S_IWUSR, \
+		show_fan##offset##_div, set_fan##offset##_div);
+set_fan(1);
+set_fan(2);
+
+static ssize_t show_alarms(struct device *dev, char *buf)
+{
+	struct lm87_data *data = lm87_update_device(dev);
+	return sprintf(buf, "%d\n", data->alarms);
+}
+static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL);
+
+static ssize_t show_vid(struct device *dev, char *buf)
+{
+	struct lm87_data *data = lm87_update_device(dev);
+	return sprintf(buf, "%d\n", vid_from_reg(data->vid, data->vrm));
+}
+static DEVICE_ATTR(cpu0_vid, S_IRUGO, show_vid, NULL);
+
+static ssize_t show_vrm(struct device *dev, char *buf)
+{
+	struct lm87_data *data = lm87_update_device(dev);
+	return sprintf(buf, "%d\n", data->vrm);
+}
+static ssize_t set_vrm(struct device *dev, const char *buf, size_t count)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct lm87_data *data = i2c_get_clientdata(client);
+	data->vrm = simple_strtoul(buf, NULL, 10);
+	return count;
+}
+static DEVICE_ATTR(vrm, S_IRUGO | S_IWUSR, show_vrm, set_vrm);
+
+static ssize_t show_aout(struct device *dev, char *buf)
+{
+	struct lm87_data *data = lm87_update_device(dev);
+	return sprintf(buf, "%d\n", AOUT_FROM_REG(data->aout));
+}
+static ssize_t set_aout(struct device *dev, const char *buf, size_t count)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct lm87_data *data = i2c_get_clientdata(client);
+	long val = simple_strtol(buf, NULL, 10);
+
+	down(&data->update_lock);
+	data->aout = AOUT_TO_REG(val);
+	lm87_write_value(client, LM87_REG_AOUT, data->aout);
+	up(&data->update_lock);
+	return count;
+}
+static DEVICE_ATTR(aout_output, S_IRUGO | S_IWUSR, show_aout, set_aout);
+
+/*
+ * Real code
+ */
+
+static int lm87_attach_adapter(struct i2c_adapter *adapter)
+{
+	if (!(adapter->class & I2C_CLASS_HWMON))
+		return 0;
+	return i2c_detect(adapter, &addr_data, lm87_detect);
+}
+
+/*
+ * The following function does more than just detection. If detection
+ * succeeds, it also registers the new chip.
+ */
+static int lm87_detect(struct i2c_adapter *adapter, int address, int kind)
+{
+	struct i2c_client *new_client;
+	struct lm87_data *data;
+	int err = 0;
+
+	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
+		goto exit;
+
+	if (!(data = kmalloc(sizeof(struct lm87_data), GFP_KERNEL))) {
+		err = -ENOMEM;
+		goto exit;
+	}
+	memset(data, 0, sizeof(struct lm87_data));
+
+	/* The common I2C client data is placed right before the
+	   LM87-specific data. */
+	new_client = &data->client;
+	i2c_set_clientdata(new_client, data);
+	new_client->addr = address;
+	new_client->adapter = adapter;
+	new_client->driver = &lm87_driver;
+	new_client->flags = 0;
+
+	/* Default to an LM87 if forced */
+	if (kind == 0)
+		kind = lm87;
+
+	/* Now, we do the remaining detection. */
+	if (kind < 0) {
+		u8 rev = lm87_read_value(new_client, LM87_REG_REVISION);
+
+		if (rev < 0x01 || rev > 0x08
+		 || (lm87_read_value(new_client, LM87_REG_CONFIG) & 0x80)
+		 || lm87_read_value(new_client, LM87_REG_COMPANY_ID) != 0x02) {
+			dev_dbg(&adapter->dev,
+				"LM87 detection failed at 0x%02x.\n",
+				address);
+			goto exit_free;
+		}
+	}
+
+	/* We can fill in the remaining client fields */
+	strlcpy(new_client->name, "lm87", I2C_NAME_SIZE);
+	data->valid = 0;
+	init_MUTEX(&data->update_lock);
+
+	/* Tell the I2C layer a new client has arrived */
+	if ((err = i2c_attach_client(new_client)))
+		goto exit_free;
+
+	/* Initialize the LM87 chip */
+	lm87_init_client(new_client);
+
+	data->in_scale[0] = 2500;
+	data->in_scale[1] = 2700;
+	data->in_scale[2] = (data->channel & CHAN_VCC_5V) ? 5000 : 3300;
+	data->in_scale[3] = 5000;
+	data->in_scale[4] = 12000;
+	data->in_scale[5] = 2700;
+	data->in_scale[6] = 1875;
+	data->in_scale[7] = 1875;
+
+	/* Register sysfs hooks */
+	device_create_file(&new_client->dev, &dev_attr_in1_input);
+	device_create_file(&new_client->dev, &dev_attr_in1_min);
+	device_create_file(&new_client->dev, &dev_attr_in1_max);
+	device_create_file(&new_client->dev, &dev_attr_in2_input);
+	device_create_file(&new_client->dev, &dev_attr_in2_min);
+	device_create_file(&new_client->dev, &dev_attr_in2_max);
+	device_create_file(&new_client->dev, &dev_attr_in3_input);
+	device_create_file(&new_client->dev, &dev_attr_in3_min);
+	device_create_file(&new_client->dev, &dev_attr_in3_max);
+	device_create_file(&new_client->dev, &dev_attr_in4_input);
+	device_create_file(&new_client->dev, &dev_attr_in4_min);
+	device_create_file(&new_client->dev, &dev_attr_in4_max);
+
+	if (data->channel & CHAN_NO_FAN(0)) {
+		device_create_file(&new_client->dev, &dev_attr_in6_input);
+		device_create_file(&new_client->dev, &dev_attr_in6_min);
+		device_create_file(&new_client->dev, &dev_attr_in6_max);
+	} else {
+		device_create_file(&new_client->dev, &dev_attr_fan1_input);
+		device_create_file(&new_client->dev, &dev_attr_fan1_min);
+		device_create_file(&new_client->dev, &dev_attr_fan1_div);
+	}
+	if (data->channel & CHAN_NO_FAN(1)) {
+		device_create_file(&new_client->dev, &dev_attr_in7_input);
+		device_create_file(&new_client->dev, &dev_attr_in7_min);
+		device_create_file(&new_client->dev, &dev_attr_in7_max);
+	} else {
+		device_create_file(&new_client->dev, &dev_attr_fan2_input);
+		device_create_file(&new_client->dev, &dev_attr_fan2_min);
+		device_create_file(&new_client->dev, &dev_attr_fan2_div);
+	}
+
+	device_create_file(&new_client->dev, &dev_attr_temp1_input);
+	device_create_file(&new_client->dev, &dev_attr_temp1_max);
+	device_create_file(&new_client->dev, &dev_attr_temp1_min);
+	device_create_file(&new_client->dev, &dev_attr_temp1_crit);
+	device_create_file(&new_client->dev, &dev_attr_temp2_input);
+	device_create_file(&new_client->dev, &dev_attr_temp2_max);
+	device_create_file(&new_client->dev, &dev_attr_temp2_min);
+	device_create_file(&new_client->dev, &dev_attr_temp2_crit);
+
+	if (data->channel & CHAN_TEMP3) {
+		device_create_file(&new_client->dev, &dev_attr_temp3_input);
+		device_create_file(&new_client->dev, &dev_attr_temp3_max);
+		device_create_file(&new_client->dev, &dev_attr_temp3_min);
+		device_create_file(&new_client->dev, &dev_attr_temp3_crit);
+	} else {
+		device_create_file(&new_client->dev, &dev_attr_in0_input);
+		device_create_file(&new_client->dev, &dev_attr_in0_min);
+		device_create_file(&new_client->dev, &dev_attr_in0_max);
+		device_create_file(&new_client->dev, &dev_attr_in5_input);
+		device_create_file(&new_client->dev, &dev_attr_in5_min);
+		device_create_file(&new_client->dev, &dev_attr_in5_max);
+	}
+
+	if (!(data->channel & CHAN_NO_VID)) {
+		device_create_file(&new_client->dev, &dev_attr_cpu0_vid);
+		device_create_file(&new_client->dev, &dev_attr_vrm);
+	}
+
+	device_create_file(&new_client->dev, &dev_attr_alarms);
+	device_create_file(&new_client->dev, &dev_attr_aout_output);
+
+	return 0;
+
+exit_free:
+	kfree(data);
+exit:
+	return err;
+}
+
+static void lm87_init_client(struct i2c_client *client)
+{
+	struct lm87_data *data = i2c_get_clientdata(client);
+	u8 config;
+
+	data->channel = lm87_read_value(client, LM87_REG_CHANNEL_MODE);
+	data->vrm = i2c_which_vrm();
+
+	config = lm87_read_value(client, LM87_REG_CONFIG);
+	if (!(config & 0x01)) {
+		int i;
+
+		/* Limits are left uninitialized after power-up */
+		for (i = 1; i < 6; i++) {
+			lm87_write_value(client, LM87_REG_IN_MIN(i), 0x00);
+			lm87_write_value(client, LM87_REG_IN_MAX(i), 0xFF);
+		}
+		for (i = 0; i < 2; i++) {
+			lm87_write_value(client, LM87_REG_TEMP_HIGH[i], 0x7F);
+			lm87_write_value(client, LM87_REG_TEMP_LOW[i], 0x00);
+			lm87_write_value(client, LM87_REG_AIN_MIN(i), 0x00);
+			lm87_write_value(client, LM87_REG_AIN_MAX(i), 0xFF);
+		}
+		if (data->channel & CHAN_TEMP3) {
+			lm87_write_value(client, LM87_REG_TEMP_HIGH[2], 0x7F);
+			lm87_write_value(client, LM87_REG_TEMP_LOW[2], 0x00);
+		} else {
+			lm87_write_value(client, LM87_REG_IN_MIN(0), 0x00);
+			lm87_write_value(client, LM87_REG_IN_MAX(0), 0xFF);
+		}
+	}
+	if ((config & 0x81) != 0x01) {
+		/* Start monitoring */
+		lm87_write_value(client, LM87_REG_CONFIG,
+				 (config & 0xF7) | 0x01);
+	}
+}
+
+static int lm87_detach_client(struct i2c_client *client)
+{
+	int err;
+
+	if ((err = i2c_detach_client(client))) {
+		dev_err(&client->dev, "Client deregistration failed, "
+			"client not detached.\n");
+		return err;
+	}
+
+	kfree(i2c_get_clientdata(client));
+	return 0;
+}
+
+static struct lm87_data *lm87_update_device(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct lm87_data *data = i2c_get_clientdata(client);
+
+	down(&data->update_lock);
+
+	if (time_after(jiffies, data->last_updated + HZ) || !data->valid) {
+		int i, j;
+
+		dev_dbg(&client->dev, "Updating data.\n");
+
+		i = (data->channel & CHAN_TEMP3) ? 1 : 0;
+		j = (data->channel & CHAN_TEMP3) ? 5 : 6;
+		for (; i < j; i++) {
+			data->in[i] = lm87_read_value(client,
+				      LM87_REG_IN(i));
+			data->in_min[i] = lm87_read_value(client,
+					  LM87_REG_IN_MIN(i));
+			data->in_max[i] = lm87_read_value(client,
+					  LM87_REG_IN_MAX(i));
+		}
+
+		for (i = 0; i < 2; i++) {
+			if (data->channel & CHAN_NO_FAN(i)) {
+				data->in[6+i] = lm87_read_value(client,
+						LM87_REG_AIN(i));
+				data->in_max[6+i] = lm87_read_value(client,
+						    LM87_REG_AIN_MAX(i));
+				data->in_min[6+i] = lm87_read_value(client,
+						    LM87_REG_AIN_MIN(i));
+
+			} else {
+				data->fan[i] = lm87_read_value(client,
+					       LM87_REG_FAN(i));
+				data->fan_min[i] = lm87_read_value(client,
+						   LM87_REG_FAN_MIN(i));
+			}
+		}
+
+		j = (data->channel & CHAN_TEMP3) ? 3 : 2;
+		for (i = 0 ; i < j; i++) {
+			data->temp[i] = lm87_read_value(client,
+					LM87_REG_TEMP[i]);
+			data->temp_high[i] = lm87_read_value(client,
+					     LM87_REG_TEMP_HIGH[i]);
+			data->temp_low[i] = lm87_read_value(client,
+					    LM87_REG_TEMP_LOW[i]);
+		}
+
+		i = lm87_read_value(client, LM87_REG_TEMP_HW_INT_LOCK);
+		j = lm87_read_value(client, LM87_REG_TEMP_HW_INT);
+		data->temp_crit_int = min(i, j);
+
+		i = lm87_read_value(client, LM87_REG_TEMP_HW_EXT_LOCK);
+		j = lm87_read_value(client, LM87_REG_TEMP_HW_EXT);
+		data->temp_crit_ext = min(i, j);
+
+		i = lm87_read_value(client, LM87_REG_VID_FAN_DIV);
+		data->fan_div[0] = (i >> 4) & 0x03;
+		data->fan_div[1] = (i >> 6) & 0x03;
+		data->vid = (i & 0x0F)
+			  | (lm87_read_value(client, LM87_REG_VID4) & 0x01)
+			     << 4;
+
+		data->alarms = lm87_read_value(client, LM87_REG_ALARMS1)
+			     | (lm87_read_value(client, LM87_REG_ALARMS2)
+				<< 8);
+		data->aout = lm87_read_value(client, LM87_REG_AOUT);
+
+		data->last_updated = jiffies;
+		data->valid = 1;
+	}
+
+	up(&data->update_lock);
+
+	return data;
+}
+
+static int __init sensors_lm87_init(void)
+{
+	return i2c_add_driver(&lm87_driver);
+}
+
+static void __exit sensors_lm87_exit(void)
+{
+	i2c_del_driver(&lm87_driver);
+}
+
+MODULE_AUTHOR("Jean Delvare <khali@linux-fr.org> and others");
+MODULE_DESCRIPTION("LM87 driver");
+MODULE_LICENSE("GPL");
+
+module_init(sensors_lm87_init);
+module_exit(sensors_lm87_exit);
diff --git a/drivers/i2c/chips/lm90.c b/drivers/i2c/chips/lm90.c
new file mode 100644
index 00000000000..2c00ff83bab
--- /dev/null
+++ b/drivers/i2c/chips/lm90.c
@@ -0,0 +1,626 @@
+/*
+ * lm90.c - Part of lm_sensors, Linux kernel modules for hardware
+ *          monitoring
+ * Copyright (C) 2003-2004  Jean Delvare <khali@linux-fr.org>
+ *
+ * Based on the lm83 driver. The LM90 is a sensor chip made by National
+ * Semiconductor. It reports up to two temperatures (its own plus up to
+ * one external one) with a 0.125 deg resolution (1 deg for local
+ * temperature) and a 3-4 deg accuracy. Complete datasheet can be
+ * obtained from National's website at:
+ *   http://www.national.com/pf/LM/LM90.html
+ *
+ * This driver also supports the LM89 and LM99, two other sensor chips
+ * made by National Semiconductor. Both have an increased remote
+ * temperature measurement accuracy (1 degree), and the LM99
+ * additionally shifts remote temperatures (measured and limits) by 16
+ * degrees, which allows for higher temperatures measurement. The
+ * driver doesn't handle it since it can be done easily in user-space.
+ * Complete datasheets can be obtained from National's website at:
+ *   http://www.national.com/pf/LM/LM89.html
+ *   http://www.national.com/pf/LM/LM99.html
+ * Note that there is no way to differenciate between both chips.
+ *
+ * This driver also supports the LM86, another sensor chip made by
+ * National Semiconductor. It is exactly similar to the LM90 except it
+ * has a higher accuracy.
+ * Complete datasheet can be obtained from National's website at:
+ *   http://www.national.com/pf/LM/LM86.html
+ *
+ * This driver also supports the ADM1032, a sensor chip made by Analog
+ * Devices. That chip is similar to the LM90, with a few differences
+ * that are not handled by this driver. Complete datasheet can be
+ * obtained from Analog's website at:
+ *   http://products.analog.com/products/info.asp?product=ADM1032
+ * Among others, it has a higher accuracy than the LM90, much like the
+ * LM86 does.
+ *
+ * This driver also supports the MAX6657, MAX6658 and MAX6659 sensor
+ * chips made by Maxim. These chips are similar to the LM86. Complete
+ * datasheet can be obtained at Maxim's website at:
+ *   http://www.maxim-ic.com/quick_view2.cfm/qv_pk/2578
+ * Note that there is no easy way to differenciate between the three
+ * variants. The extra address and features of the MAX6659 are not
+ * supported by this driver.
+ *
+ * This driver also supports the ADT7461 chip from Analog Devices but
+ * only in its "compatability mode". If an ADT7461 chip is found but
+ * is configured in non-compatible mode (where its temperature
+ * register values are decoded differently) it is ignored by this
+ * driver. Complete datasheet can be obtained from Analog's website
+ * at:
+ *   http://products.analog.com/products/info.asp?product=ADT7461
+ *
+ * Since the LM90 was the first chipset supported by this driver, most
+ * comments will refer to this chipset, but are actually general and
+ * concern all supported chipsets, unless mentioned otherwise.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/jiffies.h>
+#include <linux/i2c.h>
+#include <linux/i2c-sensor.h>
+
+/*
+ * Addresses to scan
+ * Address is fully defined internally and cannot be changed except for
+ * MAX6659.
+ * LM86, LM89, LM90, LM99, ADM1032, MAX6657 and MAX6658 have address 0x4c.
+ * LM89-1, and LM99-1 have address 0x4d.
+ * MAX6659 can have address 0x4c, 0x4d or 0x4e (unsupported).
+ * ADT7461 always has address 0x4c.
+ */
+
+static unsigned short normal_i2c[] = { 0x4c, 0x4d, I2C_CLIENT_END };
+static unsigned int normal_isa[] = { I2C_CLIENT_ISA_END };
+
+/*
+ * Insmod parameters
+ */
+
+SENSORS_INSMOD_6(lm90, adm1032, lm99, lm86, max6657, adt7461);
+
+/*
+ * The LM90 registers
+ */
+
+#define LM90_REG_R_MAN_ID		0xFE
+#define LM90_REG_R_CHIP_ID		0xFF
+#define LM90_REG_R_CONFIG1		0x03
+#define LM90_REG_W_CONFIG1		0x09
+#define LM90_REG_R_CONFIG2		0xBF
+#define LM90_REG_W_CONFIG2		0xBF
+#define LM90_REG_R_CONVRATE		0x04
+#define LM90_REG_W_CONVRATE		0x0A
+#define LM90_REG_R_STATUS		0x02
+#define LM90_REG_R_LOCAL_TEMP		0x00
+#define LM90_REG_R_LOCAL_HIGH		0x05
+#define LM90_REG_W_LOCAL_HIGH		0x0B
+#define LM90_REG_R_LOCAL_LOW		0x06
+#define LM90_REG_W_LOCAL_LOW		0x0C
+#define LM90_REG_R_LOCAL_CRIT		0x20
+#define LM90_REG_W_LOCAL_CRIT		0x20
+#define LM90_REG_R_REMOTE_TEMPH		0x01
+#define LM90_REG_R_REMOTE_TEMPL		0x10
+#define LM90_REG_R_REMOTE_OFFSH		0x11
+#define LM90_REG_W_REMOTE_OFFSH		0x11
+#define LM90_REG_R_REMOTE_OFFSL		0x12
+#define LM90_REG_W_REMOTE_OFFSL		0x12
+#define LM90_REG_R_REMOTE_HIGHH		0x07
+#define LM90_REG_W_REMOTE_HIGHH		0x0D
+#define LM90_REG_R_REMOTE_HIGHL		0x13
+#define LM90_REG_W_REMOTE_HIGHL		0x13
+#define LM90_REG_R_REMOTE_LOWH		0x08
+#define LM90_REG_W_REMOTE_LOWH		0x0E
+#define LM90_REG_R_REMOTE_LOWL		0x14
+#define LM90_REG_W_REMOTE_LOWL		0x14
+#define LM90_REG_R_REMOTE_CRIT		0x19
+#define LM90_REG_W_REMOTE_CRIT		0x19
+#define LM90_REG_R_TCRIT_HYST		0x21
+#define LM90_REG_W_TCRIT_HYST		0x21
+
+/*
+ * Conversions and various macros
+ * For local temperatures and limits, critical limits and the hysteresis
+ * value, the LM90 uses signed 8-bit values with LSB = 1 degree Celcius.
+ * For remote temperatures and limits, it uses signed 11-bit values with
+ * LSB = 0.125 degree Celcius, left-justified in 16-bit registers.
+ */
+
+#define TEMP1_FROM_REG(val)	((val) * 1000)
+#define TEMP1_TO_REG(val)	((val) <= -128000 ? -128 : \
+				 (val) >= 127000 ? 127 : \
+				 (val) < 0 ? ((val) - 500) / 1000 : \
+				 ((val) + 500) / 1000)
+#define TEMP2_FROM_REG(val)	((val) / 32 * 125)
+#define TEMP2_TO_REG(val)	((val) <= -128000 ? 0x8000 : \
+				 (val) >= 127875 ? 0x7FE0 : \
+				 (val) < 0 ? ((val) - 62) / 125 * 32 : \
+				 ((val) + 62) / 125 * 32)
+#define HYST_TO_REG(val)	((val) <= 0 ? 0 : (val) >= 30500 ? 31 : \
+				 ((val) + 500) / 1000)
+
+/* 
+ * ADT7461 is almost identical to LM90 except that attempts to write
+ * values that are outside the range 0 < temp < 127 are treated as
+ * the boundary value. 
+ */
+
+#define TEMP1_TO_REG_ADT7461(val) ((val) <= 0 ? 0 : \
+				 (val) >= 127000 ? 127 : \
+				 ((val) + 500) / 1000)
+#define TEMP2_TO_REG_ADT7461(val) ((val) <= 0 ? 0 : \
+				 (val) >= 127750 ? 0x7FC0 : \
+				 ((val) + 125) / 250 * 64)
+
+/*
+ * Functions declaration
+ */
+
+static int lm90_attach_adapter(struct i2c_adapter *adapter);
+static int lm90_detect(struct i2c_adapter *adapter, int address,
+	int kind);
+static void lm90_init_client(struct i2c_client *client);
+static int lm90_detach_client(struct i2c_client *client);
+static struct lm90_data *lm90_update_device(struct device *dev);
+
+/*
+ * Driver data (common to all clients)
+ */
+
+static struct i2c_driver lm90_driver = {
+	.owner		= THIS_MODULE,
+	.name		= "lm90",
+	.id		= I2C_DRIVERID_LM90,
+	.flags		= I2C_DF_NOTIFY,
+	.attach_adapter	= lm90_attach_adapter,
+	.detach_client	= lm90_detach_client,
+};
+
+/*
+ * Client data (each client gets its own)
+ */
+
+struct lm90_data {
+	struct i2c_client client;
+	struct semaphore update_lock;
+	char valid; /* zero until following fields are valid */
+	unsigned long last_updated; /* in jiffies */
+	int kind;
+
+	/* registers values */
+	s8 temp_input1, temp_low1, temp_high1; /* local */
+	s16 temp_input2, temp_low2, temp_high2; /* remote, combined */
+	s8 temp_crit1, temp_crit2;
+	u8 temp_hyst;
+	u8 alarms; /* bitvector */
+};
+
+/*
+ * Sysfs stuff
+ */
+
+#define show_temp(value, converter) \
+static ssize_t show_##value(struct device *dev, char *buf) \
+{ \
+	struct lm90_data *data = lm90_update_device(dev); \
+	return sprintf(buf, "%d\n", converter(data->value)); \
+}
+show_temp(temp_input1, TEMP1_FROM_REG);
+show_temp(temp_input2, TEMP2_FROM_REG);
+show_temp(temp_low1, TEMP1_FROM_REG);
+show_temp(temp_low2, TEMP2_FROM_REG);
+show_temp(temp_high1, TEMP1_FROM_REG);
+show_temp(temp_high2, TEMP2_FROM_REG);
+show_temp(temp_crit1, TEMP1_FROM_REG);
+show_temp(temp_crit2, TEMP1_FROM_REG);
+
+#define set_temp1(value, reg) \
+static ssize_t set_##value(struct device *dev, const char *buf, \
+	size_t count) \
+{ \
+	struct i2c_client *client = to_i2c_client(dev); \
+	struct lm90_data *data = i2c_get_clientdata(client); \
+	long val = simple_strtol(buf, NULL, 10); \
+ \
+	down(&data->update_lock); \
+	if (data->kind == adt7461) \
+		data->value = TEMP1_TO_REG_ADT7461(val); \
+	else \
+		data->value = TEMP1_TO_REG(val); \
+	i2c_smbus_write_byte_data(client, reg, data->value); \
+	up(&data->update_lock); \
+	return count; \
+}
+#define set_temp2(value, regh, regl) \
+static ssize_t set_##value(struct device *dev, const char *buf, \
+	size_t count) \
+{ \
+	struct i2c_client *client = to_i2c_client(dev); \
+	struct lm90_data *data = i2c_get_clientdata(client); \
+	long val = simple_strtol(buf, NULL, 10); \
+ \
+	down(&data->update_lock); \
+	if (data->kind == adt7461) \
+		data->value = TEMP2_TO_REG_ADT7461(val); \
+	else \
+		data->value = TEMP2_TO_REG(val); \
+	i2c_smbus_write_byte_data(client, regh, data->value >> 8); \
+	i2c_smbus_write_byte_data(client, regl, data->value & 0xff); \
+	up(&data->update_lock); \
+	return count; \
+}
+set_temp1(temp_low1, LM90_REG_W_LOCAL_LOW);
+set_temp2(temp_low2, LM90_REG_W_REMOTE_LOWH, LM90_REG_W_REMOTE_LOWL);
+set_temp1(temp_high1, LM90_REG_W_LOCAL_HIGH);
+set_temp2(temp_high2, LM90_REG_W_REMOTE_HIGHH, LM90_REG_W_REMOTE_HIGHL);
+set_temp1(temp_crit1, LM90_REG_W_LOCAL_CRIT);
+set_temp1(temp_crit2, LM90_REG_W_REMOTE_CRIT);
+
+#define show_temp_hyst(value, basereg) \
+static ssize_t show_##value(struct device *dev, char *buf) \
+{ \
+	struct lm90_data *data = lm90_update_device(dev); \
+	return sprintf(buf, "%d\n", TEMP1_FROM_REG(data->basereg) \
+		       - TEMP1_FROM_REG(data->temp_hyst)); \
+}
+show_temp_hyst(temp_hyst1, temp_crit1);
+show_temp_hyst(temp_hyst2, temp_crit2);
+
+static ssize_t set_temp_hyst1(struct device *dev, const char *buf,
+	size_t count)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct lm90_data *data = i2c_get_clientdata(client);
+	long val = simple_strtol(buf, NULL, 10);
+	long hyst;
+
+	down(&data->update_lock);
+	hyst = TEMP1_FROM_REG(data->temp_crit1) - val;
+	i2c_smbus_write_byte_data(client, LM90_REG_W_TCRIT_HYST,
+				  HYST_TO_REG(hyst));
+	up(&data->update_lock);
+	return count;
+}
+
+static ssize_t show_alarms(struct device *dev, char *buf)
+{
+	struct lm90_data *data = lm90_update_device(dev);
+	return sprintf(buf, "%d\n", data->alarms);
+}
+
+static DEVICE_ATTR(temp1_input, S_IRUGO, show_temp_input1, NULL);
+static DEVICE_ATTR(temp2_input, S_IRUGO, show_temp_input2, NULL);
+static DEVICE_ATTR(temp1_min, S_IWUSR | S_IRUGO, show_temp_low1,
+	set_temp_low1);
+static DEVICE_ATTR(temp2_min, S_IWUSR | S_IRUGO, show_temp_low2,
+	set_temp_low2);
+static DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO, show_temp_high1,
+	set_temp_high1);
+static DEVICE_ATTR(temp2_max, S_IWUSR | S_IRUGO, show_temp_high2,
+	set_temp_high2);
+static DEVICE_ATTR(temp1_crit, S_IWUSR | S_IRUGO, show_temp_crit1,
+	set_temp_crit1);
+static DEVICE_ATTR(temp2_crit, S_IWUSR | S_IRUGO, show_temp_crit2,
+	set_temp_crit2);
+static DEVICE_ATTR(temp1_crit_hyst, S_IWUSR | S_IRUGO, show_temp_hyst1,
+	set_temp_hyst1);
+static DEVICE_ATTR(temp2_crit_hyst, S_IRUGO, show_temp_hyst2, NULL);
+static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL);
+
+/*
+ * Real code
+ */
+
+static int lm90_attach_adapter(struct i2c_adapter *adapter)
+{
+	if (!(adapter->class & I2C_CLASS_HWMON))
+		return 0;
+	return i2c_detect(adapter, &addr_data, lm90_detect);
+}
+
+/*
+ * The following function does more than just detection. If detection
+ * succeeds, it also registers the new chip.
+ */
+static int lm90_detect(struct i2c_adapter *adapter, int address, int kind)
+{
+	struct i2c_client *new_client;
+	struct lm90_data *data;
+	int err = 0;
+	const char *name = "";
+
+	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
+		goto exit;
+
+	if (!(data = kmalloc(sizeof(struct lm90_data), GFP_KERNEL))) {
+		err = -ENOMEM;
+		goto exit;
+	}
+	memset(data, 0, sizeof(struct lm90_data));
+
+	/* The common I2C client data is placed right before the
+	   LM90-specific data. */
+	new_client = &data->client;
+	i2c_set_clientdata(new_client, data);
+	new_client->addr = address;
+	new_client->adapter = adapter;
+	new_client->driver = &lm90_driver;
+	new_client->flags = 0;
+
+	/*
+	 * Now we do the remaining detection. A negative kind means that
+	 * the driver was loaded with no force parameter (default), so we
+	 * must both detect and identify the chip. A zero kind means that
+	 * the driver was loaded with the force parameter, the detection
+	 * step shall be skipped. A positive kind means that the driver
+	 * was loaded with the force parameter and a given kind of chip is
+	 * requested, so both the detection and the identification steps
+	 * are skipped.
+	 */
+
+	/* Default to an LM90 if forced */
+	if (kind == 0)
+		kind = lm90;
+
+	if (kind < 0) { /* detection and identification */
+		u8 man_id, chip_id, reg_config1, reg_convrate;
+
+		man_id = i2c_smbus_read_byte_data(new_client,
+			 LM90_REG_R_MAN_ID);
+		chip_id = i2c_smbus_read_byte_data(new_client,
+			  LM90_REG_R_CHIP_ID);
+		reg_config1 = i2c_smbus_read_byte_data(new_client,
+			      LM90_REG_R_CONFIG1);
+		reg_convrate = i2c_smbus_read_byte_data(new_client,
+			       LM90_REG_R_CONVRATE);
+		
+		if (man_id == 0x01) { /* National Semiconductor */
+			u8 reg_config2;
+
+			reg_config2 = i2c_smbus_read_byte_data(new_client,
+				      LM90_REG_R_CONFIG2);
+
+			if ((reg_config1 & 0x2A) == 0x00
+			 && (reg_config2 & 0xF8) == 0x00
+			 && reg_convrate <= 0x09) {
+				if (address == 0x4C
+				 && (chip_id & 0xF0) == 0x20) { /* LM90 */
+					kind = lm90;
+				} else
+				if ((chip_id & 0xF0) == 0x30) { /* LM89/LM99 */
+					kind = lm99;
+				} else
+				if (address == 0x4C
+				 && (chip_id & 0xF0) == 0x10) { /* LM86 */
+					kind = lm86;
+				}
+			}
+		} else
+		if (man_id == 0x41) { /* Analog Devices */
+			if (address == 0x4C
+			 && (chip_id & 0xF0) == 0x40 /* ADM1032 */
+			 && (reg_config1 & 0x3F) == 0x00
+			 && reg_convrate <= 0x0A) {
+				kind = adm1032;
+			} else
+			if (address == 0x4c
+			 && chip_id == 0x51 /* ADT7461 */
+			 && (reg_config1 & 0x1F) == 0x00 /* check compat mode */
+			 && reg_convrate <= 0x0A) {
+				kind = adt7461;
+			}
+		} else
+		if (man_id == 0x4D) { /* Maxim */
+			/*
+			 * The Maxim variants do NOT have a chip_id register.
+			 * Reading from that address will return the last read
+			 * value, which in our case is those of the man_id
+			 * register. Likewise, the config1 register seems to
+			 * lack a low nibble, so the value will be those of the
+			 * previous read, so in our case those of the man_id
+			 * register.
+			 */
+			if (chip_id == man_id
+			 && (reg_config1 & 0x1F) == (man_id & 0x0F)
+			 && reg_convrate <= 0x09) {
+			 	kind = max6657;
+			}
+		}
+
+		if (kind <= 0) { /* identification failed */
+			dev_info(&adapter->dev,
+			    "Unsupported chip (man_id=0x%02X, "
+			    "chip_id=0x%02X).\n", man_id, chip_id);
+			goto exit_free;
+		}
+	}
+
+	if (kind == lm90) {
+		name = "lm90";
+	} else if (kind == adm1032) {
+		name = "adm1032";
+	} else if (kind == lm99) {
+		name = "lm99";
+	} else if (kind == lm86) {
+		name = "lm86";
+	} else if (kind == max6657) {
+		name = "max6657";
+	} else if (kind == adt7461) {
+		name = "adt7461";
+	}
+
+	/* We can fill in the remaining client fields */
+	strlcpy(new_client->name, name, I2C_NAME_SIZE);
+	data->valid = 0;
+	data->kind = kind;
+	init_MUTEX(&data->update_lock);
+
+	/* Tell the I2C layer a new client has arrived */
+	if ((err = i2c_attach_client(new_client)))
+		goto exit_free;
+
+	/* Initialize the LM90 chip */
+	lm90_init_client(new_client);
+
+	/* Register sysfs hooks */
+	device_create_file(&new_client->dev, &dev_attr_temp1_input);
+	device_create_file(&new_client->dev, &dev_attr_temp2_input);
+	device_create_file(&new_client->dev, &dev_attr_temp1_min);
+	device_create_file(&new_client->dev, &dev_attr_temp2_min);
+	device_create_file(&new_client->dev, &dev_attr_temp1_max);
+	device_create_file(&new_client->dev, &dev_attr_temp2_max);
+	device_create_file(&new_client->dev, &dev_attr_temp1_crit);
+	device_create_file(&new_client->dev, &dev_attr_temp2_crit);
+	device_create_file(&new_client->dev, &dev_attr_temp1_crit_hyst);
+	device_create_file(&new_client->dev, &dev_attr_temp2_crit_hyst);
+	device_create_file(&new_client->dev, &dev_attr_alarms);
+
+	return 0;
+
+exit_free:
+	kfree(data);
+exit:
+	return err;
+}
+
+static void lm90_init_client(struct i2c_client *client)
+{
+	u8 config;
+
+	/*
+	 * Start the conversions.
+	 */
+	i2c_smbus_write_byte_data(client, LM90_REG_W_CONVRATE,
+				  5); /* 2 Hz */
+	config = i2c_smbus_read_byte_data(client, LM90_REG_R_CONFIG1);
+	if (config & 0x40)
+		i2c_smbus_write_byte_data(client, LM90_REG_W_CONFIG1,
+					  config & 0xBF); /* run */
+}
+
+static int lm90_detach_client(struct i2c_client *client)
+{
+	int err;
+
+	if ((err = i2c_detach_client(client))) {
+		dev_err(&client->dev, "Client deregistration failed, "
+			"client not detached.\n");
+		return err;
+	}
+
+	kfree(i2c_get_clientdata(client));
+	return 0;
+}
+
+static struct lm90_data *lm90_update_device(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct lm90_data *data = i2c_get_clientdata(client);
+
+	down(&data->update_lock);
+
+	if (time_after(jiffies, data->last_updated + HZ * 2) || !data->valid) {
+		u8 oldh, newh;
+
+		dev_dbg(&client->dev, "Updating lm90 data.\n");
+		data->temp_input1 = i2c_smbus_read_byte_data(client,
+				    LM90_REG_R_LOCAL_TEMP);
+		data->temp_high1 = i2c_smbus_read_byte_data(client,
+				   LM90_REG_R_LOCAL_HIGH);
+		data->temp_low1 = i2c_smbus_read_byte_data(client,
+				  LM90_REG_R_LOCAL_LOW);
+		data->temp_crit1 = i2c_smbus_read_byte_data(client,
+				   LM90_REG_R_LOCAL_CRIT);
+		data->temp_crit2 = i2c_smbus_read_byte_data(client,
+				   LM90_REG_R_REMOTE_CRIT);
+		data->temp_hyst = i2c_smbus_read_byte_data(client,
+				  LM90_REG_R_TCRIT_HYST);
+
+		/*
+		 * There is a trick here. We have to read two registers to
+		 * have the remote sensor temperature, but we have to beware
+		 * a conversion could occur inbetween the readings. The
+		 * datasheet says we should either use the one-shot
+		 * conversion register, which we don't want to do (disables
+		 * hardware monitoring) or monitor the busy bit, which is
+		 * impossible (we can't read the values and monitor that bit
+		 * at the exact same time). So the solution used here is to
+		 * read the high byte once, then the low byte, then the high
+		 * byte again. If the new high byte matches the old one,
+		 * then we have a valid reading. Else we have to read the low
+		 * byte again, and now we believe we have a correct reading.
+		 */
+		oldh = i2c_smbus_read_byte_data(client,
+		       LM90_REG_R_REMOTE_TEMPH);
+		data->temp_input2 = i2c_smbus_read_byte_data(client,
+				    LM90_REG_R_REMOTE_TEMPL);
+		newh = i2c_smbus_read_byte_data(client,
+		       LM90_REG_R_REMOTE_TEMPH);
+		if (newh != oldh) {
+			data->temp_input2 = i2c_smbus_read_byte_data(client,
+					    LM90_REG_R_REMOTE_TEMPL);
+#ifdef DEBUG
+			oldh = i2c_smbus_read_byte_data(client,
+			       LM90_REG_R_REMOTE_TEMPH);
+			/* oldh is actually newer */
+			if (newh != oldh)
+				dev_warn(&client->dev, "Remote temperature may be "
+					 "wrong.\n");
+#endif
+		}
+		data->temp_input2 |= (newh << 8);
+
+		data->temp_high2 = (i2c_smbus_read_byte_data(client,
+				   LM90_REG_R_REMOTE_HIGHH) << 8) +
+				   i2c_smbus_read_byte_data(client,
+				   LM90_REG_R_REMOTE_HIGHL);
+		data->temp_low2 = (i2c_smbus_read_byte_data(client,
+				  LM90_REG_R_REMOTE_LOWH) << 8) +
+				  i2c_smbus_read_byte_data(client,
+				  LM90_REG_R_REMOTE_LOWL);
+		data->alarms = i2c_smbus_read_byte_data(client,
+			       LM90_REG_R_STATUS);
+
+		data->last_updated = jiffies;
+		data->valid = 1;
+	}
+
+	up(&data->update_lock);
+
+	return data;
+}
+
+static int __init sensors_lm90_init(void)
+{
+	return i2c_add_driver(&lm90_driver);
+}
+
+static void __exit sensors_lm90_exit(void)
+{
+	i2c_del_driver(&lm90_driver);
+}
+
+MODULE_AUTHOR("Jean Delvare <khali@linux-fr.org>");
+MODULE_DESCRIPTION("LM90/ADM1032 driver");
+MODULE_LICENSE("GPL");
+
+module_init(sensors_lm90_init);
+module_exit(sensors_lm90_exit);
diff --git a/drivers/i2c/chips/lm92.c b/drivers/i2c/chips/lm92.c
new file mode 100644
index 00000000000..fe6e83d70a7
--- /dev/null
+++ b/drivers/i2c/chips/lm92.c
@@ -0,0 +1,429 @@
+/*
+ * lm92 - Hardware monitoring driver
+ * Copyright (C) 2005  Jean Delvare <khali@linux-fr.org>
+ *
+ * Based on the lm90 driver, with some ideas taken from the lm_sensors
+ * lm92 driver as well.
+ *
+ * The LM92 is a sensor chip made by National Semiconductor. It reports
+ * its own temperature with a 0.0625 deg resolution and a 0.33 deg
+ * accuracy. Complete datasheet can be obtained from National's website
+ * at:
+ *   http://www.national.com/pf/LM/LM92.html
+ *
+ * This driver also supports the MAX6635 sensor chip made by Maxim.
+ * This chip is compatible with the LM92, but has a lesser accuracy
+ * (1.0 deg). Complete datasheet can be obtained from Maxim's website
+ * at:
+ *   http://www.maxim-ic.com/quick_view2.cfm/qv_pk/3074
+ *
+ * Since the LM92 was the first chipset supported by this driver, most
+ * comments will refer to this chipset, but are actually general and
+ * concern all supported chipsets, unless mentioned otherwise.
+ *
+ * Support could easily be added for the National Semiconductor LM76
+ * and Maxim MAX6633 and MAX6634 chips, which are mostly compatible
+ * with the LM92.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/i2c-sensor.h>
+
+
+/* The LM92 and MAX6635 have 2 two-state pins for address selection,
+   resulting in 4 possible addresses. */
+static unsigned short normal_i2c[] = { 0x48, 0x49, 0x4a, 0x4b,
+				       I2C_CLIENT_END };
+static unsigned int normal_isa[] = { I2C_CLIENT_ISA_END };
+
+/* Insmod parameters */
+SENSORS_INSMOD_1(lm92);
+
+/* The LM92 registers */
+#define LM92_REG_CONFIG			0x01 /* 8-bit, RW */
+#define LM92_REG_TEMP			0x00 /* 16-bit, RO */
+#define LM92_REG_TEMP_HYST		0x02 /* 16-bit, RW */
+#define LM92_REG_TEMP_CRIT		0x03 /* 16-bit, RW */
+#define LM92_REG_TEMP_LOW		0x04 /* 16-bit, RW */
+#define LM92_REG_TEMP_HIGH		0x05 /* 16-bit, RW */
+#define LM92_REG_MAN_ID			0x07 /* 16-bit, RO, LM92 only */
+
+/* The LM92 uses signed 13-bit values with LSB = 0.0625 degree Celsius,
+   left-justified in 16-bit registers. No rounding is done, with such
+   a resolution it's just not worth it. Note that the MAX6635 doesn't
+   make use of the 4 lower bits for limits (i.e. effective resolution
+   for limits is 1 degree Celsius). */
+static inline int TEMP_FROM_REG(s16 reg)
+{
+	return reg / 8 * 625 / 10;
+}
+
+static inline s16 TEMP_TO_REG(int val)
+{
+	if (val <= -60000)
+		return -60000 * 10 / 625 * 8;
+	if (val >= 160000)
+		return 160000 * 10 / 625 * 8;
+	return val * 10 / 625 * 8;
+}
+
+/* Alarm flags are stored in the 3 LSB of the temperature register */
+static inline u8 ALARMS_FROM_REG(s16 reg)
+{
+	return reg & 0x0007;
+}
+
+/* Driver data (common to all clients) */
+static struct i2c_driver lm92_driver;
+
+/* Client data (each client gets its own) */
+struct lm92_data {
+	struct i2c_client client;
+	struct semaphore update_lock;
+	char valid; /* zero until following fields are valid */
+	unsigned long last_updated; /* in jiffies */
+
+	/* registers values */
+	s16 temp1_input, temp1_crit, temp1_min, temp1_max, temp1_hyst;
+};
+
+
+/*
+ * Sysfs attributes and callback functions
+ */
+
+static struct lm92_data *lm92_update_device(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct lm92_data *data = i2c_get_clientdata(client);
+
+	down(&data->update_lock);
+
+	if (time_after(jiffies, data->last_updated + HZ)
+	 || !data->valid) {
+		dev_dbg(&client->dev, "Updating lm92 data\n");
+		data->temp1_input = swab16(i2c_smbus_read_word_data(client,
+				    LM92_REG_TEMP));
+		data->temp1_hyst = swab16(i2c_smbus_read_word_data(client,
+				    LM92_REG_TEMP_HYST));
+		data->temp1_crit = swab16(i2c_smbus_read_word_data(client,
+				    LM92_REG_TEMP_CRIT));
+		data->temp1_min = swab16(i2c_smbus_read_word_data(client,
+				    LM92_REG_TEMP_LOW));
+		data->temp1_max = swab16(i2c_smbus_read_word_data(client,
+				    LM92_REG_TEMP_HIGH));
+
+		data->last_updated = jiffies;
+		data->valid = 1;
+	}
+
+	up(&data->update_lock);
+
+	return data;
+}
+
+#define show_temp(value) \
+static ssize_t show_##value(struct device *dev, char *buf) \
+{ \
+	struct lm92_data *data = lm92_update_device(dev); \
+	return sprintf(buf, "%d\n", TEMP_FROM_REG(data->value)); \
+}
+show_temp(temp1_input);
+show_temp(temp1_crit);
+show_temp(temp1_min);
+show_temp(temp1_max);
+
+#define set_temp(value, reg) \
+static ssize_t set_##value(struct device *dev, const char *buf, \
+	size_t count) \
+{ \
+	struct i2c_client *client = to_i2c_client(dev); \
+	struct lm92_data *data = i2c_get_clientdata(client); \
+	long val = simple_strtol(buf, NULL, 10); \
+ \
+	down(&data->update_lock); \
+	data->value = TEMP_TO_REG(val); \
+	i2c_smbus_write_word_data(client, reg, swab16(data->value)); \
+	up(&data->update_lock); \
+	return count; \
+}
+set_temp(temp1_crit, LM92_REG_TEMP_CRIT);
+set_temp(temp1_min, LM92_REG_TEMP_LOW);
+set_temp(temp1_max, LM92_REG_TEMP_HIGH);
+
+static ssize_t show_temp1_crit_hyst(struct device *dev, char *buf)
+{
+	struct lm92_data *data = lm92_update_device(dev);
+	return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp1_crit)
+		       - TEMP_FROM_REG(data->temp1_hyst));
+}
+static ssize_t show_temp1_max_hyst(struct device *dev, char *buf)
+{
+	struct lm92_data *data = lm92_update_device(dev);
+	return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp1_max)
+		       - TEMP_FROM_REG(data->temp1_hyst));
+}
+static ssize_t show_temp1_min_hyst(struct device *dev, char *buf)
+{
+	struct lm92_data *data = lm92_update_device(dev);
+	return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp1_min)
+		       + TEMP_FROM_REG(data->temp1_hyst));
+}
+
+static ssize_t set_temp1_crit_hyst(struct device *dev, const char *buf,
+	size_t count)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct lm92_data *data = i2c_get_clientdata(client);
+	long val = simple_strtol(buf, NULL, 10);
+
+	down(&data->update_lock);
+	data->temp1_hyst = TEMP_FROM_REG(data->temp1_crit) - val;
+	i2c_smbus_write_word_data(client, LM92_REG_TEMP_HYST,
+				  swab16(TEMP_TO_REG(data->temp1_hyst)));
+	up(&data->update_lock);
+	return count;
+}
+
+static ssize_t show_alarms(struct device *dev, char *buf)
+{
+	struct lm92_data *data = lm92_update_device(dev);
+	return sprintf(buf, "%d\n", ALARMS_FROM_REG(data->temp1_input));
+}
+
+static DEVICE_ATTR(temp1_input, S_IRUGO, show_temp1_input, NULL);
+static DEVICE_ATTR(temp1_crit, S_IWUSR | S_IRUGO, show_temp1_crit,
+	set_temp1_crit);
+static DEVICE_ATTR(temp1_crit_hyst, S_IWUSR | S_IRUGO, show_temp1_crit_hyst,
+	set_temp1_crit_hyst);
+static DEVICE_ATTR(temp1_min, S_IWUSR | S_IRUGO, show_temp1_min,
+	set_temp1_min);
+static DEVICE_ATTR(temp1_min_hyst, S_IRUGO, show_temp1_min_hyst, NULL);
+static DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO, show_temp1_max,
+	set_temp1_max);
+static DEVICE_ATTR(temp1_max_hyst, S_IRUGO, show_temp1_max_hyst, NULL);
+static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL);
+
+
+/*
+ * Detection and registration
+ */
+
+static void lm92_init_client(struct i2c_client *client)
+{
+	u8 config;
+
+	/* Start the conversions if needed */
+	config = i2c_smbus_read_byte_data(client, LM92_REG_CONFIG);
+	if (config & 0x01)
+		i2c_smbus_write_byte_data(client, LM92_REG_CONFIG,
+					  config & 0xFE);
+}
+
+/* The MAX6635 has no identification register, so we have to use tricks
+   to identify it reliably. This is somewhat slow.
+   Note that we do NOT rely on the 2 MSB of the configuration register
+   always reading 0, as suggested by the datasheet, because it was once
+   reported not to be true. */
+static int max6635_check(struct i2c_client *client)
+{
+	u16 temp_low, temp_high, temp_hyst, temp_crit;
+	u8 conf;
+	int i;
+
+	/* No manufacturer ID register, so a read from this address will
+	   always return the last read value. */
+	temp_low = i2c_smbus_read_word_data(client, LM92_REG_TEMP_LOW);
+	if (i2c_smbus_read_word_data(client, LM92_REG_MAN_ID) != temp_low)
+		return 0;
+	temp_high = i2c_smbus_read_word_data(client, LM92_REG_TEMP_HIGH);
+	if (i2c_smbus_read_word_data(client, LM92_REG_MAN_ID) != temp_high)
+		return 0;
+	
+	/* Limits are stored as integer values (signed, 9-bit). */
+	if ((temp_low & 0x7f00) || (temp_high & 0x7f00))
+		return 0;
+	temp_hyst = i2c_smbus_read_word_data(client, LM92_REG_TEMP_HYST);
+	temp_crit = i2c_smbus_read_word_data(client, LM92_REG_TEMP_CRIT);
+	if ((temp_hyst & 0x7f00) || (temp_crit & 0x7f00))
+		return 0;
+
+	/* Registers addresses were found to cycle over 16-byte boundaries.
+	   We don't test all registers with all offsets so as to save some
+	   reads and time, but this should still be sufficient to dismiss
+	   non-MAX6635 chips. */
+	conf = i2c_smbus_read_byte_data(client, LM92_REG_CONFIG);
+	for (i=16; i<96; i*=2) {
+		if (temp_hyst != i2c_smbus_read_word_data(client,
+		 		 LM92_REG_TEMP_HYST + i - 16)
+		 || temp_crit != i2c_smbus_read_word_data(client,
+		 		 LM92_REG_TEMP_CRIT + i)
+		 || temp_low != i2c_smbus_read_word_data(client,
+				LM92_REG_TEMP_LOW + i + 16)
+		 || temp_high != i2c_smbus_read_word_data(client,
+		 		 LM92_REG_TEMP_HIGH + i + 32)
+		 || conf != i2c_smbus_read_byte_data(client,
+		 	    LM92_REG_CONFIG + i))
+			return 0;
+	}
+
+	return 1;
+}
+
+/* The following function does more than just detection. If detection
+   succeeds, it also registers the new chip. */
+static int lm92_detect(struct i2c_adapter *adapter, int address, int kind)
+{
+	struct i2c_client *new_client;
+	struct lm92_data *data;
+	int err = 0;
+	char *name;
+
+	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA
+					    | I2C_FUNC_SMBUS_WORD_DATA))
+		goto exit;
+
+	if (!(data = kmalloc(sizeof(struct lm92_data), GFP_KERNEL))) {
+		err = -ENOMEM;
+		goto exit;
+	}
+	memset(data, 0, sizeof(struct lm92_data));
+
+	/* Fill in enough client fields so that we can read from the chip,
+	   which is required for identication */
+	new_client = &data->client;
+	i2c_set_clientdata(new_client, data);
+	new_client->addr = address;
+	new_client->adapter = adapter;
+	new_client->driver = &lm92_driver;
+	new_client->flags = 0;
+
+	/* A negative kind means that the driver was loaded with no force
+	   parameter (default), so we must identify the chip. */
+	if (kind < 0) {
+		u8 config = i2c_smbus_read_byte_data(new_client,
+			     LM92_REG_CONFIG);
+		u16 man_id = i2c_smbus_read_word_data(new_client,
+			     LM92_REG_MAN_ID);
+
+		if ((config & 0xe0) == 0x00
+		 && man_id == 0x0180) {
+			pr_info("lm92: Found National Semiconductor LM92 chip\n");
+	 		kind = lm92;
+		} else
+		if (max6635_check(new_client)) {
+			pr_info("lm92: Found Maxim MAX6635 chip\n");
+			kind = lm92; /* No separate prefix */
+		}
+		else
+			goto exit_free;
+	} else
+	if (kind == 0) /* Default to an LM92 if forced */
+		kind = lm92;
+
+	/* Give it the proper name */
+	if (kind == lm92) {
+		name = "lm92";
+	} else { /* Supposedly cannot happen */
+		dev_dbg(&new_client->dev, "Kind out of range?\n");
+		goto exit_free;
+	}
+
+	/* Fill in the remaining client fields */
+	strlcpy(new_client->name, name, I2C_NAME_SIZE);
+	data->valid = 0;
+	init_MUTEX(&data->update_lock);
+
+	/* Tell the i2c subsystem a new client has arrived */
+	if ((err = i2c_attach_client(new_client)))
+		goto exit_free;
+
+	/* Initialize the chipset */
+	lm92_init_client(new_client);
+
+	/* Register sysfs hooks */
+	device_create_file(&new_client->dev, &dev_attr_temp1_input);
+	device_create_file(&new_client->dev, &dev_attr_temp1_crit);
+	device_create_file(&new_client->dev, &dev_attr_temp1_crit_hyst);
+	device_create_file(&new_client->dev, &dev_attr_temp1_min);
+	device_create_file(&new_client->dev, &dev_attr_temp1_min_hyst);
+	device_create_file(&new_client->dev, &dev_attr_temp1_max);
+	device_create_file(&new_client->dev, &dev_attr_temp1_max_hyst);
+	device_create_file(&new_client->dev, &dev_attr_alarms);
+
+	return 0;
+
+exit_free:
+	kfree(data);
+exit:
+	return err;
+}
+
+static int lm92_attach_adapter(struct i2c_adapter *adapter)
+{
+	if (!(adapter->class & I2C_CLASS_HWMON))
+		return 0;
+	return i2c_detect(adapter, &addr_data, lm92_detect);
+}
+
+static int lm92_detach_client(struct i2c_client *client)
+{
+	int err;
+
+	if ((err = i2c_detach_client(client))) {
+		dev_err(&client->dev, "Client deregistration failed, "
+			"client not detached.\n");
+		return err;
+	}
+
+	kfree(i2c_get_clientdata(client));
+	return 0;
+}
+
+
+/*
+ * Module and driver stuff
+ */
+
+static struct i2c_driver lm92_driver = {
+	.owner		= THIS_MODULE,
+	.name		= "lm92",
+	.id		= I2C_DRIVERID_LM92,
+	.flags		= I2C_DF_NOTIFY,
+	.attach_adapter	= lm92_attach_adapter,
+	.detach_client	= lm92_detach_client,
+};
+
+static int __init sensors_lm92_init(void)
+{
+	return i2c_add_driver(&lm92_driver);
+}
+
+static void __exit sensors_lm92_exit(void)
+{
+	i2c_del_driver(&lm92_driver);
+}
+
+MODULE_AUTHOR("Jean Delvare <khali@linux-fr.org>");
+MODULE_DESCRIPTION("LM92/MAX6635 driver");
+MODULE_LICENSE("GPL");
+
+module_init(sensors_lm92_init);
+module_exit(sensors_lm92_exit);
diff --git a/drivers/i2c/chips/m41t00.c b/drivers/i2c/chips/m41t00.c
new file mode 100644
index 00000000000..e771566dffa
--- /dev/null
+++ b/drivers/i2c/chips/m41t00.c
@@ -0,0 +1,246 @@
+/*
+ * drivers/i2c/chips/m41t00.c
+ *
+ * I2C client/driver for the ST M41T00 Real-Time Clock chip.
+ *
+ * Author: Mark A. Greer <mgreer@mvista.com>
+ *
+ * 2005 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+/*
+ * This i2c client/driver wedges between the drivers/char/genrtc.c RTC
+ * interface and the SMBus interface of the i2c subsystem.
+ * It would be more efficient to use i2c msgs/i2c_transfer directly but, as
+ * recommened in .../Documentation/i2c/writing-clients section
+ * "Sending and receiving", using SMBus level communication is preferred.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/i2c.h>
+#include <linux/rtc.h>
+#include <linux/bcd.h>
+
+#include <asm/time.h>
+#include <asm/rtc.h>
+
+#define	M41T00_DRV_NAME		"m41t00"
+
+static DECLARE_MUTEX(m41t00_mutex);
+
+static struct i2c_driver m41t00_driver;
+static struct i2c_client *save_client;
+
+static unsigned short ignore[] = { I2C_CLIENT_END };
+static unsigned short normal_addr[] = { 0x68, I2C_CLIENT_END };
+
+static struct i2c_client_address_data addr_data = {
+	.normal_i2c		= normal_addr,
+	.normal_i2c_range	= ignore,
+	.probe			= ignore,
+	.probe_range		= ignore,
+	.ignore			= ignore,
+	.ignore_range		= ignore,
+	.force			= ignore,
+};
+
+ulong
+m41t00_get_rtc_time(void)
+{
+	s32	sec, min, hour, day, mon, year;
+	s32	sec1, min1, hour1, day1, mon1, year1;
+	ulong	limit = 10;
+
+	sec = min = hour = day = mon = year = 0;
+	sec1 = min1 = hour1 = day1 = mon1 = year1 = 0;
+
+	down(&m41t00_mutex);
+	do {
+		if (((sec = i2c_smbus_read_byte_data(save_client, 0)) >= 0)
+			&& ((min = i2c_smbus_read_byte_data(save_client, 1))
+				>= 0)
+			&& ((hour = i2c_smbus_read_byte_data(save_client, 2))
+				>= 0)
+			&& ((day = i2c_smbus_read_byte_data(save_client, 4))
+				>= 0)
+			&& ((mon = i2c_smbus_read_byte_data(save_client, 5))
+				>= 0)
+			&& ((year = i2c_smbus_read_byte_data(save_client, 6))
+				>= 0)
+			&& ((sec == sec1) && (min == min1) && (hour == hour1)
+				&& (day == day1) && (mon == mon1)
+				&& (year == year1)))
+
+				break;
+
+		sec1 = sec;
+		min1 = min;
+		hour1 = hour;
+		day1 = day;
+		mon1 = mon;
+		year1 = year;
+	} while (--limit > 0);
+	up(&m41t00_mutex);
+
+	if (limit == 0) {
+		dev_warn(&save_client->dev,
+			"m41t00: can't read rtc chip\n");
+		sec = min = hour = day = mon = year = 0;
+	}
+
+	sec &= 0x7f;
+	min &= 0x7f;
+	hour &= 0x3f;
+	day &= 0x3f;
+	mon &= 0x1f;
+	year &= 0xff;
+
+	BCD_TO_BIN(sec);
+	BCD_TO_BIN(min);
+	BCD_TO_BIN(hour);
+	BCD_TO_BIN(day);
+	BCD_TO_BIN(mon);
+	BCD_TO_BIN(year);
+
+	year += 1900;
+	if (year < 1970)
+		year += 100;
+
+	return mktime(year, mon, day, hour, min, sec);
+}
+
+static void
+m41t00_set_tlet(ulong arg)
+{
+	struct rtc_time	tm;
+	ulong	nowtime = *(ulong *)arg;
+
+	to_tm(nowtime, &tm);
+	tm.tm_year = (tm.tm_year - 1900) % 100;
+
+	BIN_TO_BCD(tm.tm_sec);
+	BIN_TO_BCD(tm.tm_min);
+	BIN_TO_BCD(tm.tm_hour);
+	BIN_TO_BCD(tm.tm_mon);
+	BIN_TO_BCD(tm.tm_mday);
+	BIN_TO_BCD(tm.tm_year);
+
+	down(&m41t00_mutex);
+	if ((i2c_smbus_write_byte_data(save_client, 0, tm.tm_sec & 0x7f) < 0)
+		|| (i2c_smbus_write_byte_data(save_client, 1, tm.tm_min & 0x7f)
+			< 0)
+		|| (i2c_smbus_write_byte_data(save_client, 2, tm.tm_hour & 0x7f)
+			< 0)
+		|| (i2c_smbus_write_byte_data(save_client, 4, tm.tm_mday & 0x7f)
+			< 0)
+		|| (i2c_smbus_write_byte_data(save_client, 5, tm.tm_mon & 0x7f)
+			< 0)
+		|| (i2c_smbus_write_byte_data(save_client, 6, tm.tm_year & 0x7f)
+			< 0))
+
+		dev_warn(&save_client->dev,"m41t00: can't write to rtc chip\n");
+
+	up(&m41t00_mutex);
+	return;
+}
+
+ulong	new_time;
+
+DECLARE_TASKLET_DISABLED(m41t00_tasklet, m41t00_set_tlet, (ulong)&new_time);
+
+int
+m41t00_set_rtc_time(ulong nowtime)
+{
+	new_time = nowtime;
+
+	if (in_interrupt())
+		tasklet_schedule(&m41t00_tasklet);
+	else
+		m41t00_set_tlet((ulong)&new_time);
+
+	return 0;
+}
+
+/*
+ *****************************************************************************
+ *
+ *	Driver Interface
+ *
+ *****************************************************************************
+ */
+static int
+m41t00_probe(struct i2c_adapter *adap, int addr, int kind)
+{
+	struct i2c_client *client;
+	int rc;
+
+	client = kmalloc(sizeof(struct i2c_client), GFP_KERNEL);
+	if (!client)
+		return -ENOMEM;
+
+	memset(client, 0, sizeof(struct i2c_client));
+	strncpy(client->name, M41T00_DRV_NAME, I2C_NAME_SIZE);
+	client->flags = I2C_DF_NOTIFY;
+	client->addr = addr;
+	client->adapter = adap;
+	client->driver = &m41t00_driver;
+
+	if ((rc = i2c_attach_client(client)) != 0) {
+		kfree(client);
+		return rc;
+	}
+
+	save_client = client;
+	return 0;
+}
+
+static int
+m41t00_attach(struct i2c_adapter *adap)
+{
+	return i2c_probe(adap, &addr_data, m41t00_probe);
+}
+
+static int
+m41t00_detach(struct i2c_client *client)
+{
+	int	rc;
+
+	if ((rc = i2c_detach_client(client)) == 0) {
+		kfree(i2c_get_clientdata(client));
+		tasklet_kill(&m41t00_tasklet);
+	}
+	return rc;
+}
+
+static struct i2c_driver m41t00_driver = {
+	.owner		= THIS_MODULE,
+	.name		= M41T00_DRV_NAME,
+	.id		= I2C_DRIVERID_STM41T00,
+	.flags		= I2C_DF_NOTIFY,
+	.attach_adapter	= m41t00_attach,
+	.detach_client	= m41t00_detach,
+};
+
+static int __init
+m41t00_init(void)
+{
+	return i2c_add_driver(&m41t00_driver);
+}
+
+static void __exit
+m41t00_exit(void)
+{
+	i2c_del_driver(&m41t00_driver);
+	return;
+}
+
+module_init(m41t00_init);
+module_exit(m41t00_exit);
+
+MODULE_AUTHOR("Mark A. Greer <mgreer@mvista.com>");
+MODULE_DESCRIPTION("ST Microelectronics M41T00 RTC I2C Client Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/i2c/chips/max1619.c b/drivers/i2c/chips/max1619.c
new file mode 100644
index 00000000000..5afa961a5e1
--- /dev/null
+++ b/drivers/i2c/chips/max1619.c
@@ -0,0 +1,373 @@
+/*
+ * max1619.c - Part of lm_sensors, Linux kernel modules for hardware
+ *             monitoring
+ * Copyright (C) 2003-2004 Alexey Fisher <fishor@mail.ru>
+ *                         Jean Delvare <khali@linux-fr.org>
+ *
+ * Based on the lm90 driver. The MAX1619 is a sensor chip made by Maxim.
+ * It reports up to two temperatures (its own plus up to
+ * one external one). Complete datasheet can be
+ * obtained from Maxim's website at:
+ *   http://pdfserv.maxim-ic.com/en/ds/MAX1619.pdf
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/jiffies.h>
+#include <linux/i2c.h>
+#include <linux/i2c-sensor.h>
+
+
+static unsigned short normal_i2c[] = { 0x18, 0x19, 0x1a,
+					0x29, 0x2a, 0x2b,
+					0x4c, 0x4d, 0x4e,
+					I2C_CLIENT_END };
+static unsigned int normal_isa[] = { I2C_CLIENT_ISA_END };
+
+/*
+ * Insmod parameters
+ */
+
+SENSORS_INSMOD_1(max1619);
+
+/*
+ * The MAX1619 registers
+ */
+
+#define MAX1619_REG_R_MAN_ID		0xFE
+#define MAX1619_REG_R_CHIP_ID		0xFF
+#define MAX1619_REG_R_CONFIG		0x03
+#define MAX1619_REG_W_CONFIG		0x09
+#define MAX1619_REG_R_CONVRATE		0x04
+#define MAX1619_REG_W_CONVRATE		0x0A
+#define MAX1619_REG_R_STATUS		0x02
+#define MAX1619_REG_R_LOCAL_TEMP	0x00
+#define MAX1619_REG_R_REMOTE_TEMP	0x01
+#define MAX1619_REG_R_REMOTE_HIGH	0x07
+#define MAX1619_REG_W_REMOTE_HIGH	0x0D
+#define MAX1619_REG_R_REMOTE_LOW	0x08
+#define MAX1619_REG_W_REMOTE_LOW	0x0E
+#define MAX1619_REG_R_REMOTE_CRIT	0x10
+#define MAX1619_REG_W_REMOTE_CRIT	0x12
+#define MAX1619_REG_R_TCRIT_HYST	0x11
+#define MAX1619_REG_W_TCRIT_HYST	0x13
+
+/*
+ * Conversions and various macros
+ */
+
+#define TEMP_FROM_REG(val)	((val & 0x80 ? val-0x100 : val) * 1000)
+#define TEMP_TO_REG(val)	((val < 0 ? val+0x100*1000 : val) / 1000)
+
+/*
+ * Functions declaration
+ */
+
+static int max1619_attach_adapter(struct i2c_adapter *adapter);
+static int max1619_detect(struct i2c_adapter *adapter, int address,
+	int kind);
+static void max1619_init_client(struct i2c_client *client);
+static int max1619_detach_client(struct i2c_client *client);
+static struct max1619_data *max1619_update_device(struct device *dev);
+
+/*
+ * Driver data (common to all clients)
+ */
+
+static struct i2c_driver max1619_driver = {
+	.owner		= THIS_MODULE,
+	.name		= "max1619",
+	.flags		= I2C_DF_NOTIFY,
+	.attach_adapter	= max1619_attach_adapter,
+	.detach_client	= max1619_detach_client,
+};
+
+/*
+ * Client data (each client gets its own)
+ */
+
+struct max1619_data {
+	struct i2c_client client;
+	struct semaphore update_lock;
+	char valid; /* zero until following fields are valid */
+	unsigned long last_updated; /* in jiffies */
+
+	/* registers values */
+	u8 temp_input1; /* local */
+	u8 temp_input2, temp_low2, temp_high2; /* remote */
+	u8 temp_crit2;
+	u8 temp_hyst2;
+	u8 alarms; 
+};
+
+/*
+ * Sysfs stuff
+ */
+
+#define show_temp(value) \
+static ssize_t show_##value(struct device *dev, char *buf) \
+{ \
+	struct max1619_data *data = max1619_update_device(dev); \
+	return sprintf(buf, "%d\n", TEMP_FROM_REG(data->value)); \
+}
+show_temp(temp_input1);
+show_temp(temp_input2);
+show_temp(temp_low2);
+show_temp(temp_high2);
+show_temp(temp_crit2);
+show_temp(temp_hyst2);
+
+#define set_temp2(value, reg) \
+static ssize_t set_##value(struct device *dev, const char *buf, \
+	size_t count) \
+{ \
+	struct i2c_client *client = to_i2c_client(dev); \
+	struct max1619_data *data = i2c_get_clientdata(client); \
+	long val = simple_strtol(buf, NULL, 10); \
+ \
+	down(&data->update_lock); \
+	data->value = TEMP_TO_REG(val); \
+	i2c_smbus_write_byte_data(client, reg, data->value); \
+	up(&data->update_lock); \
+	return count; \
+}
+
+set_temp2(temp_low2, MAX1619_REG_W_REMOTE_LOW);
+set_temp2(temp_high2, MAX1619_REG_W_REMOTE_HIGH);
+set_temp2(temp_crit2, MAX1619_REG_W_REMOTE_CRIT);
+set_temp2(temp_hyst2, MAX1619_REG_W_TCRIT_HYST);
+
+static ssize_t show_alarms(struct device *dev, char *buf)
+{
+	struct max1619_data *data = max1619_update_device(dev);
+	return sprintf(buf, "%d\n", data->alarms);
+}
+
+static DEVICE_ATTR(temp1_input, S_IRUGO, show_temp_input1, NULL);
+static DEVICE_ATTR(temp2_input, S_IRUGO, show_temp_input2, NULL);
+static DEVICE_ATTR(temp2_min, S_IWUSR | S_IRUGO, show_temp_low2,
+	set_temp_low2);
+static DEVICE_ATTR(temp2_max, S_IWUSR | S_IRUGO, show_temp_high2,
+	set_temp_high2);
+static DEVICE_ATTR(temp2_crit, S_IWUSR | S_IRUGO, show_temp_crit2,
+	set_temp_crit2);
+static DEVICE_ATTR(temp2_crit_hyst, S_IWUSR | S_IRUGO, show_temp_hyst2,
+	set_temp_hyst2);
+static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL);
+
+/*
+ * Real code
+ */
+
+static int max1619_attach_adapter(struct i2c_adapter *adapter)
+{
+	if (!(adapter->class & I2C_CLASS_HWMON))
+		return 0;
+	return i2c_detect(adapter, &addr_data, max1619_detect);
+}
+
+/*
+ * The following function does more than just detection. If detection
+ * succeeds, it also registers the new chip.
+ */
+static int max1619_detect(struct i2c_adapter *adapter, int address, int kind)
+{
+	struct i2c_client *new_client;
+	struct max1619_data *data;
+	int err = 0;
+	const char *name = "";	
+	u8 reg_config=0, reg_convrate=0, reg_status=0;
+	u8 man_id, chip_id;
+	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
+		goto exit;
+
+	if (!(data = kmalloc(sizeof(struct max1619_data), GFP_KERNEL))) {
+		err = -ENOMEM;
+		goto exit;
+	}
+	memset(data, 0, sizeof(struct max1619_data));
+
+	/* The common I2C client data is placed right before the
+	   MAX1619-specific data. */
+	new_client = &data->client;
+	i2c_set_clientdata(new_client, data);
+	new_client->addr = address;
+	new_client->adapter = adapter;
+	new_client->driver = &max1619_driver;
+	new_client->flags = 0;
+
+	/*
+	 * Now we do the remaining detection. A negative kind means that
+	 * the driver was loaded with no force parameter (default), so we
+	 * must both detect and identify the chip. A zero kind means that
+	 * the driver was loaded with the force parameter, the detection
+	 * step shall be skipped. A positive kind means that the driver
+	 * was loaded with the force parameter and a given kind of chip is
+	 * requested, so both the detection and the identification steps
+	 * are skipped.
+	 */
+	if (kind < 0) { /* detection */
+		reg_config = i2c_smbus_read_byte_data(new_client,
+			      MAX1619_REG_R_CONFIG);
+		reg_convrate = i2c_smbus_read_byte_data(new_client,
+			       MAX1619_REG_R_CONVRATE);
+		reg_status = i2c_smbus_read_byte_data(new_client,
+				MAX1619_REG_R_STATUS);
+		if ((reg_config & 0x03) != 0x00
+		 || reg_convrate > 0x07 || (reg_status & 0x61 ) !=0x00) {
+			dev_dbg(&adapter->dev,
+				"MAX1619 detection failed at 0x%02x.\n",
+				address);
+			goto exit_free;
+		}
+	}
+
+	if (kind <= 0) { /* identification */
+	
+		man_id = i2c_smbus_read_byte_data(new_client,
+			 MAX1619_REG_R_MAN_ID);
+		chip_id = i2c_smbus_read_byte_data(new_client,
+			  MAX1619_REG_R_CHIP_ID);
+		
+		if ((man_id == 0x4D) && (chip_id == 0x04)){  
+				kind = max1619;
+			}
+		}
+
+		if (kind <= 0) { /* identification failed */
+			dev_info(&adapter->dev,
+			    "Unsupported chip (man_id=0x%02X, "
+			    "chip_id=0x%02X).\n", man_id, chip_id);
+			goto exit_free;
+		}
+	
+
+	if (kind == max1619){
+		name = "max1619";
+	}
+
+	/* We can fill in the remaining client fields */
+	strlcpy(new_client->name, name, I2C_NAME_SIZE);
+	data->valid = 0;
+	init_MUTEX(&data->update_lock);
+
+	/* Tell the I2C layer a new client has arrived */
+	if ((err = i2c_attach_client(new_client)))
+		goto exit_free;
+
+	/* Initialize the MAX1619 chip */
+	max1619_init_client(new_client);
+
+	/* Register sysfs hooks */
+	device_create_file(&new_client->dev, &dev_attr_temp1_input);
+	device_create_file(&new_client->dev, &dev_attr_temp2_input);
+	device_create_file(&new_client->dev, &dev_attr_temp2_min);
+	device_create_file(&new_client->dev, &dev_attr_temp2_max);
+	device_create_file(&new_client->dev, &dev_attr_temp2_crit);
+	device_create_file(&new_client->dev, &dev_attr_temp2_crit_hyst);
+	device_create_file(&new_client->dev, &dev_attr_alarms);
+
+	return 0;
+
+exit_free:
+	kfree(data);
+exit:
+	return err;
+}
+
+static void max1619_init_client(struct i2c_client *client)
+{
+	u8 config;
+
+	/*
+	 * Start the conversions.
+	 */
+	i2c_smbus_write_byte_data(client, MAX1619_REG_W_CONVRATE,
+				  5); /* 2 Hz */
+	config = i2c_smbus_read_byte_data(client, MAX1619_REG_R_CONFIG);
+	if (config & 0x40)
+		i2c_smbus_write_byte_data(client, MAX1619_REG_W_CONFIG,
+					  config & 0xBF); /* run */
+}
+
+static int max1619_detach_client(struct i2c_client *client)
+{
+	int err;
+
+	if ((err = i2c_detach_client(client))) {
+		dev_err(&client->dev, "Client deregistration failed, "
+			"client not detached.\n");
+		return err;
+	}
+
+	kfree(i2c_get_clientdata(client));
+	return 0;
+}
+
+static struct max1619_data *max1619_update_device(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct max1619_data *data = i2c_get_clientdata(client);
+
+	down(&data->update_lock);
+
+	if (time_after(jiffies, data->last_updated + HZ * 2) || !data->valid) {
+		dev_dbg(&client->dev, "Updating max1619 data.\n");
+		data->temp_input1 = i2c_smbus_read_byte_data(client,
+					MAX1619_REG_R_LOCAL_TEMP);
+		data->temp_input2 = i2c_smbus_read_byte_data(client,
+					MAX1619_REG_R_REMOTE_TEMP);
+		data->temp_high2 = i2c_smbus_read_byte_data(client,
+					MAX1619_REG_R_REMOTE_HIGH);
+		data->temp_low2 = i2c_smbus_read_byte_data(client,
+					MAX1619_REG_R_REMOTE_LOW);
+		data->temp_crit2 = i2c_smbus_read_byte_data(client,
+					MAX1619_REG_R_REMOTE_CRIT);
+		data->temp_hyst2 = i2c_smbus_read_byte_data(client,
+					MAX1619_REG_R_TCRIT_HYST);
+		data->alarms = i2c_smbus_read_byte_data(client,
+					MAX1619_REG_R_STATUS);
+
+		data->last_updated = jiffies;
+		data->valid = 1;
+	}
+
+	up(&data->update_lock);
+
+	return data;
+}
+
+static int __init sensors_max1619_init(void)
+{
+	return i2c_add_driver(&max1619_driver);
+}
+
+static void __exit sensors_max1619_exit(void)
+{
+	i2c_del_driver(&max1619_driver);
+}
+
+MODULE_AUTHOR("Alexey Fisher <fishor@mail.ru> and"
+	"Jean Delvare <khali@linux-fr.org>");
+MODULE_DESCRIPTION("MAX1619 sensor driver");
+MODULE_LICENSE("GPL");
+
+module_init(sensors_max1619_init);
+module_exit(sensors_max1619_exit);
diff --git a/drivers/i2c/chips/pc87360.c b/drivers/i2c/chips/pc87360.c
new file mode 100644
index 00000000000..6d94c36c921
--- /dev/null
+++ b/drivers/i2c/chips/pc87360.c
@@ -0,0 +1,1349 @@
+/*
+ *  pc87360.c - Part of lm_sensors, Linux kernel modules
+ *              for hardware monitoring
+ *  Copyright (C) 2004 Jean Delvare <khali@linux-fr.org>
+ *
+ *  Copied from smsc47m1.c:
+ *  Copyright (C) 2002 Mark D. Studebaker <mdsxyz123@yahoo.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ *  Supports the following chips:
+ *
+ *  Chip        #vin    #fan    #pwm    #temp   devid
+ *  PC87360     -       2       2       -       0xE1
+ *  PC87363     -       2       2       -       0xE8
+ *  PC87364     -       3       3       -       0xE4
+ *  PC87365     11      3       3       2       0xE5
+ *  PC87366     11      3       3       3-4     0xE9
+ *
+ *  This driver assumes that no more than one chip is present, and one of
+ *  the standard Super-I/O addresses is used (0x2E/0x2F or 0x4E/0x4F).
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/jiffies.h>
+#include <linux/i2c.h>
+#include <linux/i2c-sensor.h>
+#include <linux/i2c-vid.h>
+#include <asm/io.h>
+
+static unsigned short normal_i2c[] = { I2C_CLIENT_END };
+static unsigned int normal_isa[] = { 0, I2C_CLIENT_ISA_END };
+static struct i2c_force_data forces[] = {{ NULL }};
+static u8 devid;
+static unsigned int extra_isa[3];
+static u8 confreg[4];
+
+enum chips { any_chip, pc87360, pc87363, pc87364, pc87365, pc87366 };
+static struct i2c_address_data addr_data = {
+	.normal_i2c		= normal_i2c,
+	.normal_isa		= normal_isa,
+	.forces			= forces,
+};
+
+static int init = 1;
+module_param(init, int, 0);
+MODULE_PARM_DESC(init,
+ "Chip initialization level:\n"
+ " 0: None\n"
+ "*1: Forcibly enable internal voltage and temperature channels, except in9\n"
+ " 2: Forcibly enable all voltage and temperature channels, except in9\n"
+ " 3: Forcibly enable all voltage and temperature channels, including in9");
+
+/*
+ * Super-I/O registers and operations
+ */
+
+#define DEV	0x07	/* Register: Logical device select */
+#define DEVID	0x20	/* Register: Device ID */
+#define ACT	0x30	/* Register: Device activation */
+#define BASE	0x60	/* Register: Base address */
+
+#define FSCM	0x09	/* Logical device: fans */
+#define VLM	0x0d	/* Logical device: voltages */
+#define TMS	0x0e	/* Logical device: temperatures */
+static const u8 logdev[3] = { FSCM, VLM, TMS };
+
+#define LD_FAN		0
+#define LD_IN		1
+#define LD_TEMP		2
+
+static inline void superio_outb(int sioaddr, int reg, int val)
+{
+	outb(reg, sioaddr);
+	outb(val, sioaddr+1);
+}
+
+static inline int superio_inb(int sioaddr, int reg)
+{
+	outb(reg, sioaddr);
+	return inb(sioaddr+1);
+}
+
+static inline void superio_exit(int sioaddr)
+{
+	outb(0x02, sioaddr);
+	outb(0x02, sioaddr+1);
+}
+
+/*
+ * Logical devices
+ */
+
+#define PC87360_EXTENT		0x10
+#define PC87365_REG_BANK	0x09
+#define NO_BANK			0xff
+
+/*
+ * Fan registers and conversions
+ */
+
+/* nr has to be 0 or 1 (PC87360/87363) or 2 (PC87364/87365/87366) */
+#define PC87360_REG_PRESCALE(nr)	(0x00 + 2 * (nr))
+#define PC87360_REG_PWM(nr)		(0x01 + 2 * (nr))
+#define PC87360_REG_FAN_MIN(nr)		(0x06 + 3 * (nr))
+#define PC87360_REG_FAN(nr)		(0x07 + 3 * (nr))
+#define PC87360_REG_FAN_STATUS(nr)	(0x08 + 3 * (nr))
+
+#define FAN_FROM_REG(val,div)		((val) == 0 ? 0: \
+					 480000 / ((val)*(div)))
+#define FAN_TO_REG(val,div)		((val) <= 100 ? 0 : \
+					 480000 / ((val)*(div)))
+#define FAN_DIV_FROM_REG(val)		(1 << ((val >> 5) & 0x03))
+#define FAN_STATUS_FROM_REG(val)	((val) & 0x07)
+
+#define FAN_CONFIG_MONITOR(val,nr)	(((val) >> (2 + nr * 3)) & 1)
+#define FAN_CONFIG_CONTROL(val,nr)	(((val) >> (3 + nr * 3)) & 1)
+#define FAN_CONFIG_INVERT(val,nr)	(((val) >> (4 + nr * 3)) & 1)
+
+#define PWM_FROM_REG(val,inv)		((inv) ? 255 - (val) : (val))
+static inline u8 PWM_TO_REG(int val, int inv)
+{
+	if (inv)
+		val = 255 - val;
+	if (val < 0)
+		return 0;
+	if (val > 255)
+		return 255;
+	return val;
+}
+
+/*
+ * Voltage registers and conversions
+ */
+
+#define PC87365_REG_IN_CONVRATE		0x07
+#define PC87365_REG_IN_CONFIG		0x08
+#define PC87365_REG_IN			0x0B
+#define PC87365_REG_IN_MIN		0x0D
+#define PC87365_REG_IN_MAX		0x0C
+#define PC87365_REG_IN_STATUS		0x0A
+#define PC87365_REG_IN_ALARMS1		0x00
+#define PC87365_REG_IN_ALARMS2		0x01
+#define PC87365_REG_VID			0x06
+
+#define IN_FROM_REG(val,ref)		(((val) * (ref) + 128) / 256)
+#define IN_TO_REG(val,ref)		((val) < 0 ? 0 : \
+					 (val)*256 >= (ref)*255 ? 255: \
+					 ((val) * 256 + (ref)/2) / (ref))
+
+/*
+ * Temperature registers and conversions
+ */
+
+#define PC87365_REG_TEMP_CONFIG		0x08
+#define PC87365_REG_TEMP		0x0B
+#define PC87365_REG_TEMP_MIN		0x0D
+#define PC87365_REG_TEMP_MAX		0x0C
+#define PC87365_REG_TEMP_CRIT		0x0E
+#define PC87365_REG_TEMP_STATUS		0x0A
+#define PC87365_REG_TEMP_ALARMS		0x00
+
+#define TEMP_FROM_REG(val)		((val) * 1000)
+#define TEMP_TO_REG(val)		((val) < -55000 ? -55 : \
+					 (val) > 127000 ? 127 : \
+					 (val) < 0 ? ((val) - 500) / 1000 : \
+					 ((val) + 500) / 1000)
+
+/*
+ * Client data (each client gets its own)
+ */
+
+struct pc87360_data {
+	struct i2c_client client;
+	struct semaphore lock;
+	struct semaphore update_lock;
+	char valid;		/* !=0 if following fields are valid */
+	unsigned long last_updated;	/* In jiffies */
+
+	int address[3];
+
+	u8 fannr, innr, tempnr;
+
+	u8 fan[3];		/* Register value */
+	u8 fan_min[3];		/* Register value */
+	u8 fan_status[3];	/* Register value */
+	u8 pwm[3];		/* Register value */
+	u16 fan_conf;		/* Configuration register values, combined */
+
+	u16 in_vref;		/* 1 mV/bit */
+	u8 in[14];		/* Register value */
+	u8 in_min[14];		/* Register value */
+	u8 in_max[14];		/* Register value */
+	u8 in_crit[3];		/* Register value */
+	u8 in_status[14];	/* Register value */
+	u16 in_alarms;		/* Register values, combined, masked */
+	u8 vid_conf;		/* Configuration register value */
+	u8 vrm;
+	u8 vid;			/* Register value */
+
+	s8 temp[3];		/* Register value */
+	s8 temp_min[3];		/* Register value */
+	s8 temp_max[3];		/* Register value */
+	s8 temp_crit[3];	/* Register value */
+	u8 temp_status[3];	/* Register value */
+	u8 temp_alarms;		/* Register value, masked */
+};
+
+/*
+ * Functions declaration
+ */
+
+static int pc87360_attach_adapter(struct i2c_adapter *adapter);
+static int pc87360_detect(struct i2c_adapter *adapter, int address, int kind);
+static int pc87360_detach_client(struct i2c_client *client);
+
+static int pc87360_read_value(struct pc87360_data *data, u8 ldi, u8 bank,
+			      u8 reg);
+static void pc87360_write_value(struct pc87360_data *data, u8 ldi, u8 bank,
+				u8 reg, u8 value);
+static void pc87360_init_client(struct i2c_client *client, int use_thermistors);
+static struct pc87360_data *pc87360_update_device(struct device *dev);
+
+/*
+ * Driver data (common to all clients)
+ */
+
+static struct i2c_driver pc87360_driver = {
+	.owner		= THIS_MODULE,
+	.name		= "pc87360",
+	.flags		= I2C_DF_NOTIFY,
+	.attach_adapter	= pc87360_attach_adapter,
+	.detach_client	= pc87360_detach_client,
+};
+
+/*
+ * Sysfs stuff
+ */
+
+static ssize_t set_fan_min(struct device *dev, const char *buf,
+	size_t count, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct pc87360_data *data = i2c_get_clientdata(client);
+	long fan_min = simple_strtol(buf, NULL, 10);
+
+	down(&data->update_lock);
+	fan_min = FAN_TO_REG(fan_min, FAN_DIV_FROM_REG(data->fan_status[nr]));
+
+	/* If it wouldn't fit, change clock divisor */
+	while (fan_min > 255
+	    && (data->fan_status[nr] & 0x60) != 0x60) {
+		fan_min >>= 1;
+		data->fan[nr] >>= 1;
+		data->fan_status[nr] += 0x20;
+	}
+	data->fan_min[nr] = fan_min > 255 ? 255 : fan_min;
+	pc87360_write_value(data, LD_FAN, NO_BANK, PC87360_REG_FAN_MIN(nr),
+			    data->fan_min[nr]);
+
+	/* Write new divider, preserve alarm bits */
+	pc87360_write_value(data, LD_FAN, NO_BANK, PC87360_REG_FAN_STATUS(nr),
+			    data->fan_status[nr] & 0xF9);
+	up(&data->update_lock);
+
+	return count;
+}
+
+#define show_and_set_fan(offset) \
+static ssize_t show_fan##offset##_input(struct device *dev, char *buf) \
+{ \
+	struct pc87360_data *data = pc87360_update_device(dev); \
+	return sprintf(buf, "%u\n", FAN_FROM_REG(data->fan[offset-1], \
+		       FAN_DIV_FROM_REG(data->fan_status[offset-1]))); \
+} \
+static ssize_t show_fan##offset##_min(struct device *dev, char *buf) \
+{ \
+	struct pc87360_data *data = pc87360_update_device(dev); \
+	return sprintf(buf, "%u\n", FAN_FROM_REG(data->fan_min[offset-1], \
+		       FAN_DIV_FROM_REG(data->fan_status[offset-1]))); \
+} \
+static ssize_t show_fan##offset##_div(struct device *dev, char *buf) \
+{ \
+	struct pc87360_data *data = pc87360_update_device(dev); \
+	return sprintf(buf, "%u\n", \
+		       FAN_DIV_FROM_REG(data->fan_status[offset-1])); \
+} \
+static ssize_t show_fan##offset##_status(struct device *dev, char *buf) \
+{ \
+	struct pc87360_data *data = pc87360_update_device(dev); \
+	return sprintf(buf, "%u\n", \
+		       FAN_STATUS_FROM_REG(data->fan_status[offset-1])); \
+} \
+static ssize_t set_fan##offset##_min(struct device *dev, const char *buf, \
+	size_t count) \
+{ \
+	return set_fan_min(dev, buf, count, offset-1); \
+} \
+static DEVICE_ATTR(fan##offset##_input, S_IRUGO, \
+	show_fan##offset##_input, NULL); \
+static DEVICE_ATTR(fan##offset##_min, S_IWUSR | S_IRUGO, \
+	show_fan##offset##_min, set_fan##offset##_min); \
+static DEVICE_ATTR(fan##offset##_div, S_IRUGO, \
+	show_fan##offset##_div, NULL); \
+static DEVICE_ATTR(fan##offset##_status, S_IRUGO, \
+	show_fan##offset##_status, NULL);
+show_and_set_fan(1)
+show_and_set_fan(2)
+show_and_set_fan(3)
+
+#define show_and_set_pwm(offset) \
+static ssize_t show_pwm##offset(struct device *dev, char *buf) \
+{ \
+	struct pc87360_data *data = pc87360_update_device(dev); \
+	return sprintf(buf, "%u\n", \
+		       PWM_FROM_REG(data->pwm[offset-1], \
+				    FAN_CONFIG_INVERT(data->fan_conf, \
+						      offset-1))); \
+} \
+static ssize_t set_pwm##offset(struct device *dev, const char *buf, \
+	size_t count) \
+{ \
+	struct i2c_client *client = to_i2c_client(dev); \
+	struct pc87360_data *data = i2c_get_clientdata(client); \
+	long val = simple_strtol(buf, NULL, 10); \
+ \
+	down(&data->update_lock); \
+	data->pwm[offset-1] = PWM_TO_REG(val, \
+			      FAN_CONFIG_INVERT(data->fan_conf, offset-1)); \
+	pc87360_write_value(data, LD_FAN, NO_BANK, PC87360_REG_PWM(offset-1), \
+			    data->pwm[offset-1]); \
+	up(&data->update_lock); \
+	return count; \
+} \
+static DEVICE_ATTR(pwm##offset, S_IWUSR | S_IRUGO, \
+	show_pwm##offset, set_pwm##offset);
+show_and_set_pwm(1)
+show_and_set_pwm(2)
+show_and_set_pwm(3)
+
+#define show_and_set_in(offset) \
+static ssize_t show_in##offset##_input(struct device *dev, char *buf) \
+{ \
+	struct pc87360_data *data = pc87360_update_device(dev); \
+	return sprintf(buf, "%u\n", IN_FROM_REG(data->in[offset], \
+		       data->in_vref)); \
+} \
+static ssize_t show_in##offset##_min(struct device *dev, char *buf) \
+{ \
+	struct pc87360_data *data = pc87360_update_device(dev); \
+	return sprintf(buf, "%u\n", IN_FROM_REG(data->in_min[offset], \
+		       data->in_vref)); \
+} \
+static ssize_t show_in##offset##_max(struct device *dev, char *buf) \
+{ \
+	struct pc87360_data *data = pc87360_update_device(dev); \
+	return sprintf(buf, "%u\n", IN_FROM_REG(data->in_max[offset], \
+		       data->in_vref)); \
+} \
+static ssize_t show_in##offset##_status(struct device *dev, char *buf) \
+{ \
+	struct pc87360_data *data = pc87360_update_device(dev); \
+	return sprintf(buf, "%u\n", data->in_status[offset]); \
+} \
+static ssize_t set_in##offset##_min(struct device *dev, const char *buf, \
+	size_t count) \
+{ \
+	struct i2c_client *client = to_i2c_client(dev); \
+	struct pc87360_data *data = i2c_get_clientdata(client); \
+	long val = simple_strtol(buf, NULL, 10); \
+ \
+	down(&data->update_lock); \
+	data->in_min[offset] = IN_TO_REG(val, data->in_vref); \
+	pc87360_write_value(data, LD_IN, offset, PC87365_REG_IN_MIN, \
+			    data->in_min[offset]); \
+	up(&data->update_lock); \
+	return count; \
+} \
+static ssize_t set_in##offset##_max(struct device *dev, const char *buf, \
+	size_t count) \
+{ \
+	struct i2c_client *client = to_i2c_client(dev); \
+	struct pc87360_data *data = i2c_get_clientdata(client); \
+	long val = simple_strtol(buf, NULL, 10); \
+ \
+	down(&data->update_lock); \
+	data->in_max[offset] = IN_TO_REG(val, \
+			       data->in_vref); \
+	pc87360_write_value(data, LD_IN, offset, PC87365_REG_IN_MAX, \
+			    data->in_max[offset]); \
+	up(&data->update_lock); \
+	return count; \
+} \
+static DEVICE_ATTR(in##offset##_input, S_IRUGO, \
+	show_in##offset##_input, NULL); \
+static DEVICE_ATTR(in##offset##_min, S_IWUSR | S_IRUGO, \
+	show_in##offset##_min, set_in##offset##_min); \
+static DEVICE_ATTR(in##offset##_max, S_IWUSR | S_IRUGO, \
+	show_in##offset##_max, set_in##offset##_max); \
+static DEVICE_ATTR(in##offset##_status, S_IRUGO, \
+	show_in##offset##_status, NULL);
+show_and_set_in(0)
+show_and_set_in(1)
+show_and_set_in(2)
+show_and_set_in(3)
+show_and_set_in(4)
+show_and_set_in(5)
+show_and_set_in(6)
+show_and_set_in(7)
+show_and_set_in(8)
+show_and_set_in(9)
+show_and_set_in(10)
+
+#define show_and_set_therm(offset) \
+static ssize_t show_temp##offset##_input(struct device *dev, char *buf) \
+{ \
+	struct pc87360_data *data = pc87360_update_device(dev); \
+	return sprintf(buf, "%u\n", IN_FROM_REG(data->in[offset+7], \
+		       data->in_vref)); \
+} \
+static ssize_t show_temp##offset##_min(struct device *dev, char *buf) \
+{ \
+	struct pc87360_data *data = pc87360_update_device(dev); \
+	return sprintf(buf, "%u\n", IN_FROM_REG(data->in_min[offset+7], \
+		       data->in_vref)); \
+} \
+static ssize_t show_temp##offset##_max(struct device *dev, char *buf) \
+{ \
+	struct pc87360_data *data = pc87360_update_device(dev); \
+	return sprintf(buf, "%u\n", IN_FROM_REG(data->in_max[offset+7], \
+		       data->in_vref)); \
+} \
+static ssize_t show_temp##offset##_crit(struct device *dev, char *buf) \
+{ \
+	struct pc87360_data *data = pc87360_update_device(dev); \
+	return sprintf(buf, "%u\n", IN_FROM_REG(data->in_crit[offset-4], \
+		       data->in_vref)); \
+} \
+static ssize_t show_temp##offset##_status(struct device *dev, char *buf) \
+{ \
+	struct pc87360_data *data = pc87360_update_device(dev); \
+	return sprintf(buf, "%u\n", data->in_status[offset+7]); \
+} \
+static ssize_t set_temp##offset##_min(struct device *dev, const char *buf, \
+	size_t count) \
+{ \
+	struct i2c_client *client = to_i2c_client(dev); \
+	struct pc87360_data *data = i2c_get_clientdata(client); \
+	long val = simple_strtol(buf, NULL, 10); \
+ \
+	down(&data->update_lock); \
+	data->in_min[offset+7] = IN_TO_REG(val, data->in_vref); \
+	pc87360_write_value(data, LD_IN, offset+7, PC87365_REG_TEMP_MIN, \
+			    data->in_min[offset+7]); \
+	up(&data->update_lock); \
+	return count; \
+} \
+static ssize_t set_temp##offset##_max(struct device *dev, const char *buf, \
+	size_t count) \
+{ \
+	struct i2c_client *client = to_i2c_client(dev); \
+	struct pc87360_data *data = i2c_get_clientdata(client); \
+	long val = simple_strtol(buf, NULL, 10); \
+ \
+	down(&data->update_lock); \
+	data->in_max[offset+7] = IN_TO_REG(val, data->in_vref); \
+	pc87360_write_value(data, LD_IN, offset+7, PC87365_REG_TEMP_MAX, \
+			    data->in_max[offset+7]); \
+	up(&data->update_lock); \
+	return count; \
+} \
+static ssize_t set_temp##offset##_crit(struct device *dev, const char *buf, \
+	size_t count) \
+{ \
+	struct i2c_client *client = to_i2c_client(dev); \
+	struct pc87360_data *data = i2c_get_clientdata(client); \
+	long val = simple_strtol(buf, NULL, 10); \
+ \
+	down(&data->update_lock); \
+	data->in_crit[offset-4] = IN_TO_REG(val, data->in_vref); \
+	pc87360_write_value(data, LD_IN, offset+7, PC87365_REG_TEMP_CRIT, \
+			    data->in_crit[offset-4]); \
+	up(&data->update_lock); \
+	return count; \
+} \
+static DEVICE_ATTR(temp##offset##_input, S_IRUGO, \
+	show_temp##offset##_input, NULL); \
+static DEVICE_ATTR(temp##offset##_min, S_IWUSR | S_IRUGO, \
+	show_temp##offset##_min, set_temp##offset##_min); \
+static DEVICE_ATTR(temp##offset##_max, S_IWUSR | S_IRUGO, \
+	show_temp##offset##_max, set_temp##offset##_max); \
+static DEVICE_ATTR(temp##offset##_crit, S_IWUSR | S_IRUGO, \
+	show_temp##offset##_crit, set_temp##offset##_crit); \
+static DEVICE_ATTR(temp##offset##_status, S_IRUGO, \
+	show_temp##offset##_status, NULL);
+show_and_set_therm(4)
+show_and_set_therm(5)
+show_and_set_therm(6)
+
+static ssize_t show_vid(struct device *dev, char *buf)
+{
+	struct pc87360_data *data = pc87360_update_device(dev);
+	return sprintf(buf, "%u\n", vid_from_reg(data->vid, data->vrm));
+}
+static DEVICE_ATTR(cpu0_vid, S_IRUGO, show_vid, NULL);
+
+static ssize_t show_vrm(struct device *dev, char *buf)
+{
+	struct pc87360_data *data = pc87360_update_device(dev);
+	return sprintf(buf, "%u\n", data->vrm);
+}
+static ssize_t set_vrm(struct device *dev, const char *buf, size_t count)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct pc87360_data *data = i2c_get_clientdata(client);
+	data->vrm = simple_strtoul(buf, NULL, 10);
+	return count;
+}
+static DEVICE_ATTR(vrm, S_IRUGO | S_IWUSR, show_vrm, set_vrm);
+
+static ssize_t show_in_alarms(struct device *dev, char *buf)
+{
+	struct pc87360_data *data = pc87360_update_device(dev);
+	return sprintf(buf, "%u\n", data->in_alarms);
+}
+static DEVICE_ATTR(alarms_in, S_IRUGO, show_in_alarms, NULL);
+
+#define show_and_set_temp(offset) \
+static ssize_t show_temp##offset##_input(struct device *dev, char *buf) \
+{ \
+	struct pc87360_data *data = pc87360_update_device(dev); \
+	return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp[offset-1])); \
+} \
+static ssize_t show_temp##offset##_min(struct device *dev, char *buf) \
+{ \
+	struct pc87360_data *data = pc87360_update_device(dev); \
+	return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_min[offset-1])); \
+} \
+static ssize_t show_temp##offset##_max(struct device *dev, char *buf) \
+{ \
+	struct pc87360_data *data = pc87360_update_device(dev); \
+	return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_max[offset-1])); \
+}\
+static ssize_t show_temp##offset##_crit(struct device *dev, char *buf) \
+{ \
+	struct pc87360_data *data = pc87360_update_device(dev); \
+	return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_crit[offset-1])); \
+}\
+static ssize_t show_temp##offset##_status(struct device *dev, char *buf) \
+{ \
+	struct pc87360_data *data = pc87360_update_device(dev); \
+	return sprintf(buf, "%d\n", data->temp_status[offset-1]); \
+}\
+static ssize_t set_temp##offset##_min(struct device *dev, const char *buf, \
+	size_t count) \
+{ \
+	struct i2c_client *client = to_i2c_client(dev); \
+	struct pc87360_data *data = i2c_get_clientdata(client); \
+	long val = simple_strtol(buf, NULL, 10); \
+ \
+	down(&data->update_lock); \
+	data->temp_min[offset-1] = TEMP_TO_REG(val); \
+	pc87360_write_value(data, LD_TEMP, offset-1, PC87365_REG_TEMP_MIN, \
+			    data->temp_min[offset-1]); \
+	up(&data->update_lock); \
+	return count; \
+} \
+static ssize_t set_temp##offset##_max(struct device *dev, const char *buf, \
+	size_t count) \
+{ \
+	struct i2c_client *client = to_i2c_client(dev); \
+	struct pc87360_data *data = i2c_get_clientdata(client); \
+	long val = simple_strtol(buf, NULL, 10); \
+ \
+	down(&data->update_lock); \
+	data->temp_max[offset-1] = TEMP_TO_REG(val); \
+	pc87360_write_value(data, LD_TEMP, offset-1, PC87365_REG_TEMP_MAX, \
+			    data->temp_max[offset-1]); \
+	up(&data->update_lock); \
+	return count; \
+} \
+static ssize_t set_temp##offset##_crit(struct device *dev, const char *buf, \
+	size_t count) \
+{ \
+	struct i2c_client *client = to_i2c_client(dev); \
+	struct pc87360_data *data = i2c_get_clientdata(client); \
+	long val = simple_strtol(buf, NULL, 10); \
+ \
+	down(&data->update_lock); \
+	data->temp_crit[offset-1] = TEMP_TO_REG(val); \
+	pc87360_write_value(data, LD_TEMP, offset-1, PC87365_REG_TEMP_CRIT, \
+			    data->temp_crit[offset-1]); \
+	up(&data->update_lock); \
+	return count; \
+} \
+static DEVICE_ATTR(temp##offset##_input, S_IRUGO, \
+	show_temp##offset##_input, NULL); \
+static DEVICE_ATTR(temp##offset##_min, S_IWUSR | S_IRUGO, \
+	show_temp##offset##_min, set_temp##offset##_min); \
+static DEVICE_ATTR(temp##offset##_max, S_IWUSR | S_IRUGO, \
+	show_temp##offset##_max, set_temp##offset##_max); \
+static DEVICE_ATTR(temp##offset##_crit, S_IWUSR | S_IRUGO, \
+	show_temp##offset##_crit, set_temp##offset##_crit); \
+static DEVICE_ATTR(temp##offset##_status, S_IRUGO, \
+	show_temp##offset##_status, NULL);
+show_and_set_temp(1)
+show_and_set_temp(2)
+show_and_set_temp(3)
+
+static ssize_t show_temp_alarms(struct device *dev, char *buf)
+{
+	struct pc87360_data *data = pc87360_update_device(dev);
+	return sprintf(buf, "%u\n", data->temp_alarms);
+}
+static DEVICE_ATTR(alarms_temp, S_IRUGO, show_temp_alarms, NULL);
+
+/*
+ * Device detection, registration and update
+ */
+
+static int pc87360_attach_adapter(struct i2c_adapter *adapter)
+{
+	return i2c_detect(adapter, &addr_data, pc87360_detect);
+}
+
+static int pc87360_find(int sioaddr, u8 *devid, int *address)
+{
+	u16 val;
+	int i;
+	int nrdev; /* logical device count */
+
+	/* No superio_enter */
+
+	/* Identify device */
+	val = superio_inb(sioaddr, DEVID);
+	switch (val) {
+	case 0xE1: /* PC87360 */
+	case 0xE8: /* PC87363 */
+	case 0xE4: /* PC87364 */
+		nrdev = 1;
+		break;
+	case 0xE5: /* PC87365 */
+	case 0xE9: /* PC87366 */
+		nrdev = 3;
+		break;
+	default:
+		superio_exit(sioaddr);
+		return -ENODEV;
+	}
+	/* Remember the device id */
+	*devid = val;
+
+	for (i = 0; i < nrdev; i++) {
+		/* select logical device */
+		superio_outb(sioaddr, DEV, logdev[i]);
+
+		val = superio_inb(sioaddr, ACT);
+		if (!(val & 0x01)) {
+			printk(KERN_INFO "pc87360: Device 0x%02x not "
+			       "activated\n", logdev[i]);
+			continue;
+		}
+
+		val = (superio_inb(sioaddr, BASE) << 8)
+		    | superio_inb(sioaddr, BASE + 1);
+		if (!val) {
+			printk(KERN_INFO "pc87360: Base address not set for "
+			       "device 0x%02x\n", logdev[i]);
+			continue;
+		}
+
+		address[i] = val;
+
+		if (i==0) { /* Fans */
+			confreg[0] = superio_inb(sioaddr, 0xF0);
+			confreg[1] = superio_inb(sioaddr, 0xF1);
+
+#ifdef DEBUG
+			printk(KERN_DEBUG "pc87360: Fan 1: mon=%d "
+			       "ctrl=%d inv=%d\n", (confreg[0]>>2)&1,
+			       (confreg[0]>>3)&1, (confreg[0]>>4)&1);
+			printk(KERN_DEBUG "pc87360: Fan 2: mon=%d "
+			       "ctrl=%d inv=%d\n", (confreg[0]>>5)&1,
+			       (confreg[0]>>6)&1, (confreg[0]>>7)&1);
+			printk(KERN_DEBUG "pc87360: Fan 3: mon=%d "
+			       "ctrl=%d inv=%d\n", confreg[1]&1,
+			       (confreg[1]>>1)&1, (confreg[1]>>2)&1);
+#endif
+		} else if (i==1) { /* Voltages */
+			/* Are we using thermistors? */
+			if (*devid == 0xE9) { /* PC87366 */
+				/* These registers are not logical-device
+				   specific, just that we won't need them if
+				   we don't use the VLM device */
+				confreg[2] = superio_inb(sioaddr, 0x2B);
+				confreg[3] = superio_inb(sioaddr, 0x25);
+
+				if (confreg[2] & 0x40) {
+					printk(KERN_INFO "pc87360: Using "
+					       "thermistors for temperature "
+					       "monitoring\n");
+				}
+				if (confreg[3] & 0xE0) {
+					printk(KERN_INFO "pc87360: VID "
+					       "inputs routed (mode %u)\n",
+					       confreg[3] >> 5);
+				}
+			}
+		}
+	}
+
+	superio_exit(sioaddr);
+	return 0;
+}
+
+/* We don't really care about the address.
+   Read from extra_isa instead. */
+int pc87360_detect(struct i2c_adapter *adapter, int address, int kind)
+{
+	int i;
+	struct i2c_client *new_client;
+	struct pc87360_data *data;
+	int err = 0;
+	const char *name = "pc87360";
+	int use_thermistors = 0;
+
+	if (!i2c_is_isa_adapter(adapter))
+		return -ENODEV;
+
+	if (!(data = kmalloc(sizeof(struct pc87360_data), GFP_KERNEL)))
+		return -ENOMEM;
+	memset(data, 0x00, sizeof(struct pc87360_data));
+
+	new_client = &data->client;
+	i2c_set_clientdata(new_client, data);
+	new_client->addr = address;
+	init_MUTEX(&data->lock);
+	new_client->adapter = adapter;
+	new_client->driver = &pc87360_driver;
+	new_client->flags = 0;
+
+	data->fannr = 2;
+	data->innr = 0;
+	data->tempnr = 0;
+
+	switch (devid) {
+	case 0xe8:
+		name = "pc87363";
+		break;
+	case 0xe4:
+		name = "pc87364";
+		data->fannr = 3;
+		break;
+	case 0xe5:
+		name = "pc87365";
+		data->fannr = extra_isa[0] ? 3 : 0;
+		data->innr = extra_isa[1] ? 11 : 0;
+		data->tempnr = extra_isa[2] ? 2 : 0;
+		break;
+	case 0xe9:
+		name = "pc87366";
+		data->fannr = extra_isa[0] ? 3 : 0;
+		data->innr = extra_isa[1] ? 14 : 0;
+		data->tempnr = extra_isa[2] ? 3 : 0;
+		break;
+	}
+
+	strcpy(new_client->name, name);
+	data->valid = 0;
+	init_MUTEX(&data->update_lock);
+
+	for (i = 0; i < 3; i++) {
+		if (((data->address[i] = extra_isa[i]))
+		 && !request_region(extra_isa[i], PC87360_EXTENT,
+		 		    pc87360_driver.name)) {
+			dev_err(&new_client->dev, "Region 0x%x-0x%x already "
+				"in use!\n", extra_isa[i],
+				extra_isa[i]+PC87360_EXTENT-1);
+			for (i--; i >= 0; i--)
+				release_region(extra_isa[i], PC87360_EXTENT);
+			err = -EBUSY;
+			goto ERROR1;
+		}
+	}
+
+	/* Retrieve the fans configuration from Super-I/O space */
+	if (data->fannr)
+		data->fan_conf = confreg[0] | (confreg[1] << 8);
+
+	if ((err = i2c_attach_client(new_client)))
+		goto ERROR2;
+
+	/* Use the correct reference voltage
+	   Unless both the VLM and the TMS logical devices agree to
+	   use an external Vref, the internal one is used. */
+	if (data->innr) {
+		i = pc87360_read_value(data, LD_IN, NO_BANK,
+				       PC87365_REG_IN_CONFIG);
+		if (data->tempnr) {
+			i &= pc87360_read_value(data, LD_TEMP, NO_BANK,
+						PC87365_REG_TEMP_CONFIG);
+		}
+		data->in_vref = (i&0x02) ? 3025 : 2966;
+		dev_dbg(&new_client->dev, "Using %s reference voltage\n",
+			(i&0x02) ? "external" : "internal");
+
+		data->vid_conf = confreg[3];
+		data->vrm = 90;
+	}
+
+	/* Fan clock dividers may be needed before any data is read */
+	for (i = 0; i < data->fannr; i++) {
+		if (FAN_CONFIG_MONITOR(data->fan_conf, i))
+			data->fan_status[i] = pc87360_read_value(data,
+					      LD_FAN, NO_BANK,
+					      PC87360_REG_FAN_STATUS(i));
+	}
+
+	if (init > 0) {
+		if (devid == 0xe9 && data->address[1]) /* PC87366 */
+			use_thermistors = confreg[2] & 0x40;
+
+		pc87360_init_client(new_client, use_thermistors);
+	}
+
+	/* Register sysfs hooks */
+	if (data->innr) {
+		device_create_file(&new_client->dev, &dev_attr_in0_input);
+		device_create_file(&new_client->dev, &dev_attr_in1_input);
+		device_create_file(&new_client->dev, &dev_attr_in2_input);
+		device_create_file(&new_client->dev, &dev_attr_in3_input);
+		device_create_file(&new_client->dev, &dev_attr_in4_input);
+		device_create_file(&new_client->dev, &dev_attr_in5_input);
+		device_create_file(&new_client->dev, &dev_attr_in6_input);
+		device_create_file(&new_client->dev, &dev_attr_in7_input);
+		device_create_file(&new_client->dev, &dev_attr_in8_input);
+		device_create_file(&new_client->dev, &dev_attr_in9_input);
+		device_create_file(&new_client->dev, &dev_attr_in10_input);
+		device_create_file(&new_client->dev, &dev_attr_in0_min);
+		device_create_file(&new_client->dev, &dev_attr_in1_min);
+		device_create_file(&new_client->dev, &dev_attr_in2_min);
+		device_create_file(&new_client->dev, &dev_attr_in3_min);
+		device_create_file(&new_client->dev, &dev_attr_in4_min);
+		device_create_file(&new_client->dev, &dev_attr_in5_min);
+		device_create_file(&new_client->dev, &dev_attr_in6_min);
+		device_create_file(&new_client->dev, &dev_attr_in7_min);
+		device_create_file(&new_client->dev, &dev_attr_in8_min);
+		device_create_file(&new_client->dev, &dev_attr_in9_min);
+		device_create_file(&new_client->dev, &dev_attr_in10_min);
+		device_create_file(&new_client->dev, &dev_attr_in0_max);
+		device_create_file(&new_client->dev, &dev_attr_in1_max);
+		device_create_file(&new_client->dev, &dev_attr_in2_max);
+		device_create_file(&new_client->dev, &dev_attr_in3_max);
+		device_create_file(&new_client->dev, &dev_attr_in4_max);
+		device_create_file(&new_client->dev, &dev_attr_in5_max);
+		device_create_file(&new_client->dev, &dev_attr_in6_max);
+		device_create_file(&new_client->dev, &dev_attr_in7_max);
+		device_create_file(&new_client->dev, &dev_attr_in8_max);
+		device_create_file(&new_client->dev, &dev_attr_in9_max);
+		device_create_file(&new_client->dev, &dev_attr_in10_max);
+		device_create_file(&new_client->dev, &dev_attr_in0_status);
+		device_create_file(&new_client->dev, &dev_attr_in1_status);
+		device_create_file(&new_client->dev, &dev_attr_in2_status);
+		device_create_file(&new_client->dev, &dev_attr_in3_status);
+		device_create_file(&new_client->dev, &dev_attr_in4_status);
+		device_create_file(&new_client->dev, &dev_attr_in5_status);
+		device_create_file(&new_client->dev, &dev_attr_in6_status);
+		device_create_file(&new_client->dev, &dev_attr_in7_status);
+		device_create_file(&new_client->dev, &dev_attr_in8_status);
+		device_create_file(&new_client->dev, &dev_attr_in9_status);
+		device_create_file(&new_client->dev, &dev_attr_in10_status);
+
+		device_create_file(&new_client->dev, &dev_attr_cpu0_vid);
+		device_create_file(&new_client->dev, &dev_attr_vrm);
+		device_create_file(&new_client->dev, &dev_attr_alarms_in);
+	}
+
+	if (data->tempnr) {
+		device_create_file(&new_client->dev, &dev_attr_temp1_input);
+		device_create_file(&new_client->dev, &dev_attr_temp2_input);
+		device_create_file(&new_client->dev, &dev_attr_temp1_min);
+		device_create_file(&new_client->dev, &dev_attr_temp2_min);
+		device_create_file(&new_client->dev, &dev_attr_temp1_max);
+		device_create_file(&new_client->dev, &dev_attr_temp2_max);
+		device_create_file(&new_client->dev, &dev_attr_temp1_crit);
+		device_create_file(&new_client->dev, &dev_attr_temp2_crit);
+		device_create_file(&new_client->dev, &dev_attr_temp1_status);
+		device_create_file(&new_client->dev, &dev_attr_temp2_status);
+
+		device_create_file(&new_client->dev, &dev_attr_alarms_temp);
+	}
+	if (data->tempnr == 3) {
+		device_create_file(&new_client->dev, &dev_attr_temp3_input);
+		device_create_file(&new_client->dev, &dev_attr_temp3_min);
+		device_create_file(&new_client->dev, &dev_attr_temp3_max);
+		device_create_file(&new_client->dev, &dev_attr_temp3_crit);
+		device_create_file(&new_client->dev, &dev_attr_temp3_status);
+	}
+	if (data->innr == 14) {
+		device_create_file(&new_client->dev, &dev_attr_temp4_input);
+		device_create_file(&new_client->dev, &dev_attr_temp5_input);
+		device_create_file(&new_client->dev, &dev_attr_temp6_input);
+		device_create_file(&new_client->dev, &dev_attr_temp4_min);
+		device_create_file(&new_client->dev, &dev_attr_temp5_min);
+		device_create_file(&new_client->dev, &dev_attr_temp6_min);
+		device_create_file(&new_client->dev, &dev_attr_temp4_max);
+		device_create_file(&new_client->dev, &dev_attr_temp5_max);
+		device_create_file(&new_client->dev, &dev_attr_temp6_max);
+		device_create_file(&new_client->dev, &dev_attr_temp4_crit);
+		device_create_file(&new_client->dev, &dev_attr_temp5_crit);
+		device_create_file(&new_client->dev, &dev_attr_temp6_crit);
+		device_create_file(&new_client->dev, &dev_attr_temp4_status);
+		device_create_file(&new_client->dev, &dev_attr_temp5_status);
+		device_create_file(&new_client->dev, &dev_attr_temp6_status);
+	}
+
+	if (data->fannr) {
+		if (FAN_CONFIG_MONITOR(data->fan_conf, 0)) {
+			device_create_file(&new_client->dev,
+					   &dev_attr_fan1_input);
+			device_create_file(&new_client->dev,
+					   &dev_attr_fan1_min);
+			device_create_file(&new_client->dev,
+					   &dev_attr_fan1_div);
+			device_create_file(&new_client->dev,
+					   &dev_attr_fan1_status);
+		}
+
+		if (FAN_CONFIG_MONITOR(data->fan_conf, 1)) {
+			device_create_file(&new_client->dev,
+					   &dev_attr_fan2_input);
+			device_create_file(&new_client->dev,
+					   &dev_attr_fan2_min);
+			device_create_file(&new_client->dev,
+					   &dev_attr_fan2_div);
+			device_create_file(&new_client->dev,
+					   &dev_attr_fan2_status);
+		}
+
+		if (FAN_CONFIG_CONTROL(data->fan_conf, 0))
+			device_create_file(&new_client->dev, &dev_attr_pwm1);
+		if (FAN_CONFIG_CONTROL(data->fan_conf, 1))
+			device_create_file(&new_client->dev, &dev_attr_pwm2);
+	}
+	if (data->fannr == 3) {
+		if (FAN_CONFIG_MONITOR(data->fan_conf, 2)) {
+			device_create_file(&new_client->dev,
+					   &dev_attr_fan3_input);
+			device_create_file(&new_client->dev,
+					   &dev_attr_fan3_min);
+			device_create_file(&new_client->dev,
+					   &dev_attr_fan3_div);
+			device_create_file(&new_client->dev,
+					   &dev_attr_fan3_status);
+		}
+
+		if (FAN_CONFIG_CONTROL(data->fan_conf, 2))
+			device_create_file(&new_client->dev, &dev_attr_pwm3);
+	}
+
+	return 0;
+
+ERROR2:
+	for (i = 0; i < 3; i++) {
+		if (data->address[i]) {
+			release_region(data->address[i], PC87360_EXTENT);
+		}
+	}
+ERROR1:
+	kfree(data);
+	return err;
+}
+
+static int pc87360_detach_client(struct i2c_client *client)
+{
+	struct pc87360_data *data = i2c_get_clientdata(client);
+	int i;
+
+	if ((i = i2c_detach_client(client))) {
+		dev_err(&client->dev, "Client deregistration failed, "
+			"client not detached.\n");
+		return i;
+	}
+
+	for (i = 0; i < 3; i++) {
+		if (data->address[i]) {
+			release_region(data->address[i], PC87360_EXTENT);
+		}
+	}
+	kfree(data);
+
+	return 0;
+}
+
+/* ldi is the logical device index
+   bank is for voltages and temperatures only */
+static int pc87360_read_value(struct pc87360_data *data, u8 ldi, u8 bank,
+			      u8 reg)
+{
+	int res;
+
+	down(&(data->lock));
+	if (bank != NO_BANK)
+		outb_p(bank, data->address[ldi] + PC87365_REG_BANK);
+	res = inb_p(data->address[ldi] + reg);
+	up(&(data->lock));
+
+	return res;
+}
+
+static void pc87360_write_value(struct pc87360_data *data, u8 ldi, u8 bank,
+				u8 reg, u8 value)
+{
+	down(&(data->lock));
+	if (bank != NO_BANK)
+		outb_p(bank, data->address[ldi] + PC87365_REG_BANK);
+	outb_p(value, data->address[ldi] + reg);
+	up(&(data->lock));
+}
+
+static void pc87360_init_client(struct i2c_client *client, int use_thermistors)
+{
+	struct pc87360_data *data = i2c_get_clientdata(client);
+	int i, nr;
+	const u8 init_in[14] = { 2, 2, 2, 2, 2, 2, 2, 1, 1, 3, 1, 2, 2, 2 };
+	const u8 init_temp[3] = { 2, 2, 1 };
+	u8 reg;
+
+	if (init >= 2 && data->innr) {
+		reg = pc87360_read_value(data, LD_IN, NO_BANK,
+					 PC87365_REG_IN_CONVRATE);
+		dev_info(&client->dev, "VLM conversion set to"
+			 "1s period, 160us delay\n");
+		pc87360_write_value(data, LD_IN, NO_BANK,
+				    PC87365_REG_IN_CONVRATE,
+				    (reg & 0xC0) | 0x11);
+	}
+
+	nr = data->innr < 11 ? data->innr : 11;
+	for (i=0; i<nr; i++) {
+		if (init >= init_in[i]) {
+			/* Forcibly enable voltage channel */
+			reg = pc87360_read_value(data, LD_IN, i,
+						 PC87365_REG_IN_STATUS);
+			if (!(reg & 0x01)) {
+				dev_dbg(&client->dev, "Forcibly "
+					"enabling in%d\n", i);
+				pc87360_write_value(data, LD_IN, i,
+						    PC87365_REG_IN_STATUS,
+						    (reg & 0x68) | 0x87);
+			}
+		}
+	}
+
+	/* We can't blindly trust the Super-I/O space configuration bit,
+	   most BIOS won't set it properly */
+	for (i=11; i<data->innr; i++) {
+		reg = pc87360_read_value(data, LD_IN, i,
+					 PC87365_REG_TEMP_STATUS);
+		use_thermistors = use_thermistors || (reg & 0x01);
+	}
+
+	i = use_thermistors ? 2 : 0;
+	for (; i<data->tempnr; i++) {
+		if (init >= init_temp[i]) {
+			/* Forcibly enable temperature channel */
+			reg = pc87360_read_value(data, LD_TEMP, i,
+						 PC87365_REG_TEMP_STATUS);
+			if (!(reg & 0x01)) {
+				dev_dbg(&client->dev, "Forcibly "
+					"enabling temp%d\n", i+1);
+				pc87360_write_value(data, LD_TEMP, i,
+						    PC87365_REG_TEMP_STATUS,
+						    0xCF);
+			}
+		}
+	}
+
+	if (use_thermistors) {
+		for (i=11; i<data->innr; i++) {
+			if (init >= init_in[i]) {
+				/* The pin may already be used by thermal
+				   diodes */
+				reg = pc87360_read_value(data, LD_TEMP,
+				      (i-11)/2, PC87365_REG_TEMP_STATUS);
+				if (reg & 0x01) {
+					dev_dbg(&client->dev, "Skipping "
+						"temp%d, pin already in use "
+						"by temp%d\n", i-7, (i-11)/2);
+					continue;
+				}
+
+				/* Forcibly enable thermistor channel */
+				reg = pc87360_read_value(data, LD_IN, i,
+							 PC87365_REG_IN_STATUS);
+				if (!(reg & 0x01)) {
+					dev_dbg(&client->dev, "Forcibly "
+						"enabling temp%d\n", i-7);
+					pc87360_write_value(data, LD_IN, i,
+						PC87365_REG_TEMP_STATUS,
+						(reg & 0x60) | 0x8F);
+				}
+			}
+		}
+	}
+
+	if (data->innr) {
+		reg = pc87360_read_value(data, LD_IN, NO_BANK,
+					 PC87365_REG_IN_CONFIG);
+		if (reg & 0x01) {
+			dev_dbg(&client->dev, "Forcibly "
+				"enabling monitoring (VLM)\n");
+			pc87360_write_value(data, LD_IN, NO_BANK,
+					    PC87365_REG_IN_CONFIG,
+					    reg & 0xFE);
+		}
+	}
+
+	if (data->tempnr) {
+		reg = pc87360_read_value(data, LD_TEMP, NO_BANK,
+					 PC87365_REG_TEMP_CONFIG);
+		if (reg & 0x01) {
+			dev_dbg(&client->dev, "Forcibly enabling "
+				"monitoring (TMS)\n");
+			pc87360_write_value(data, LD_TEMP, NO_BANK,
+					    PC87365_REG_TEMP_CONFIG,
+					    reg & 0xFE);
+		}
+
+		if (init >= 2) {
+			/* Chip config as documented by National Semi. */
+			pc87360_write_value(data, LD_TEMP, 0xF, 0xA, 0x08);
+			/* We voluntarily omit the bank here, in case the
+			   sequence itself matters. It shouldn't be a problem,
+			   since nobody else is supposed to access the
+			   device at that point. */
+			pc87360_write_value(data, LD_TEMP, NO_BANK, 0xB, 0x04);
+			pc87360_write_value(data, LD_TEMP, NO_BANK, 0xC, 0x35);
+			pc87360_write_value(data, LD_TEMP, NO_BANK, 0xD, 0x05);
+			pc87360_write_value(data, LD_TEMP, NO_BANK, 0xE, 0x05);
+		}
+	}
+}
+
+static void pc87360_autodiv(struct i2c_client *client, int nr)
+{
+	struct pc87360_data *data = i2c_get_clientdata(client);
+	u8 old_min = data->fan_min[nr];
+
+	/* Increase clock divider if needed and possible */
+	if ((data->fan_status[nr] & 0x04) /* overflow flag */
+	 || (data->fan[nr] >= 224)) { /* next to overflow */
+		if ((data->fan_status[nr] & 0x60) != 0x60) {
+			data->fan_status[nr] += 0x20;
+			data->fan_min[nr] >>= 1;
+			data->fan[nr] >>= 1;
+			dev_dbg(&client->dev, "Increasing "
+				"clock divider to %d for fan %d\n",
+				FAN_DIV_FROM_REG(data->fan_status[nr]), nr+1);
+		}
+	} else {
+		/* Decrease clock divider if possible */
+		while (!(data->fan_min[nr] & 0x80) /* min "nails" divider */
+		 && data->fan[nr] < 85 /* bad accuracy */
+		 && (data->fan_status[nr] & 0x60) != 0x00) {
+			data->fan_status[nr] -= 0x20;
+			data->fan_min[nr] <<= 1;
+			data->fan[nr] <<= 1;
+			dev_dbg(&client->dev, "Decreasing "
+				"clock divider to %d for fan %d\n",
+				FAN_DIV_FROM_REG(data->fan_status[nr]),
+				nr+1);
+		}
+	}
+
+	/* Write new fan min if it changed */
+	if (old_min != data->fan_min[nr]) {
+		pc87360_write_value(data, LD_FAN, NO_BANK,
+				    PC87360_REG_FAN_MIN(nr),
+				    data->fan_min[nr]);
+	}
+}
+
+static struct pc87360_data *pc87360_update_device(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct pc87360_data *data = i2c_get_clientdata(client);
+	u8 i;
+
+	down(&data->update_lock);
+
+	if (time_after(jiffies, data->last_updated + HZ * 2) || !data->valid) {
+		dev_dbg(&client->dev, "Data update\n");
+
+		/* Fans */
+		for (i = 0; i < data->fannr; i++) {
+			if (FAN_CONFIG_MONITOR(data->fan_conf, i)) {
+				data->fan_status[i] =
+					pc87360_read_value(data, LD_FAN,
+					NO_BANK, PC87360_REG_FAN_STATUS(i));
+				data->fan[i] = pc87360_read_value(data, LD_FAN,
+					       NO_BANK, PC87360_REG_FAN(i));
+				data->fan_min[i] = pc87360_read_value(data,
+						   LD_FAN, NO_BANK,
+						   PC87360_REG_FAN_MIN(i));
+				/* Change clock divider if needed */
+				pc87360_autodiv(client, i);
+				/* Clear bits and write new divider */
+				pc87360_write_value(data, LD_FAN, NO_BANK,
+						    PC87360_REG_FAN_STATUS(i),
+						    data->fan_status[i]);
+			}
+			if (FAN_CONFIG_CONTROL(data->fan_conf, i))
+				data->pwm[i] = pc87360_read_value(data, LD_FAN,
+					       NO_BANK, PC87360_REG_PWM(i));
+		}
+
+		/* Voltages */
+		for (i = 0; i < data->innr; i++) {
+			data->in_status[i] = pc87360_read_value(data, LD_IN, i,
+					     PC87365_REG_IN_STATUS);
+			/* Clear bits */
+			pc87360_write_value(data, LD_IN, i,
+					    PC87365_REG_IN_STATUS,
+					    data->in_status[i]);
+			if ((data->in_status[i] & 0x81) == 0x81) {
+				data->in[i] = pc87360_read_value(data, LD_IN,
+					      i, PC87365_REG_IN);
+			}
+			if (data->in_status[i] & 0x01) {
+				data->in_min[i] = pc87360_read_value(data,
+						  LD_IN, i,
+						  PC87365_REG_IN_MIN);
+				data->in_max[i] = pc87360_read_value(data,
+						  LD_IN, i,
+						  PC87365_REG_IN_MAX);
+				if (i >= 11)
+					data->in_crit[i-11] =
+						pc87360_read_value(data, LD_IN,
+						i, PC87365_REG_TEMP_CRIT);
+			}
+		}
+		if (data->innr) {
+			data->in_alarms = pc87360_read_value(data, LD_IN,
+					  NO_BANK, PC87365_REG_IN_ALARMS1)
+					| ((pc87360_read_value(data, LD_IN,
+					    NO_BANK, PC87365_REG_IN_ALARMS2)
+					    & 0x07) << 8);
+			data->vid = (data->vid_conf & 0xE0) ?
+				    pc87360_read_value(data, LD_IN,
+				    NO_BANK, PC87365_REG_VID) : 0x1F;
+		}
+
+		/* Temperatures */
+		for (i = 0; i < data->tempnr; i++) {
+			data->temp_status[i] = pc87360_read_value(data,
+					       LD_TEMP, i,
+					       PC87365_REG_TEMP_STATUS);
+			/* Clear bits */
+			pc87360_write_value(data, LD_TEMP, i,
+					    PC87365_REG_TEMP_STATUS,
+					    data->temp_status[i]);
+			if ((data->temp_status[i] & 0x81) == 0x81) {
+				data->temp[i] = pc87360_read_value(data,
+						LD_TEMP, i,
+						PC87365_REG_TEMP);
+			}
+			if (data->temp_status[i] & 0x01) {
+				data->temp_min[i] = pc87360_read_value(data,
+						    LD_TEMP, i,
+						    PC87365_REG_TEMP_MIN);
+				data->temp_max[i] = pc87360_read_value(data,
+						    LD_TEMP, i,
+						    PC87365_REG_TEMP_MAX);
+				data->temp_crit[i] = pc87360_read_value(data,
+						     LD_TEMP, i,
+						     PC87365_REG_TEMP_CRIT);
+			}
+		}
+		if (data->tempnr) {
+			data->temp_alarms = pc87360_read_value(data, LD_TEMP,
+					    NO_BANK, PC87365_REG_TEMP_ALARMS)
+					    & 0x3F;
+		}
+
+		data->last_updated = jiffies;
+		data->valid = 1;
+	}
+
+	up(&data->update_lock);
+
+	return data;
+}
+
+static int __init pc87360_init(void)
+{
+	int i;
+
+	if (pc87360_find(0x2e, &devid, extra_isa)
+	 && pc87360_find(0x4e, &devid, extra_isa)) {
+		printk(KERN_WARNING "pc87360: PC8736x not detected, "
+		       "module not inserted.\n");
+		return -ENODEV;
+	}
+
+	/* Arbitrarily pick one of the addresses */
+	for (i = 0; i < 3; i++) {
+		if (extra_isa[i] != 0x0000) {
+			normal_isa[0] = extra_isa[i];
+			break;
+		}
+	}
+
+	if (normal_isa[0] == 0x0000) {
+		printk(KERN_WARNING "pc87360: No active logical device, "
+		       "module not inserted.\n");
+		return -ENODEV;
+	}
+
+	return i2c_add_driver(&pc87360_driver);
+}
+
+static void __exit pc87360_exit(void)
+{
+	i2c_del_driver(&pc87360_driver);
+}
+
+
+MODULE_AUTHOR("Jean Delvare <khali@linux-fr.org>");
+MODULE_DESCRIPTION("PC8736x hardware monitor");
+MODULE_LICENSE("GPL");
+
+module_init(pc87360_init);
+module_exit(pc87360_exit);
diff --git a/drivers/i2c/chips/pcf8574.c b/drivers/i2c/chips/pcf8574.c
new file mode 100644
index 00000000000..48b4e22eaff
--- /dev/null
+++ b/drivers/i2c/chips/pcf8574.c
@@ -0,0 +1,229 @@
+/*
+    pcf8574.c - Part of lm_sensors, Linux kernel modules for hardware
+             monitoring
+    Copyright (c) 2000  Frodo Looijaard <frodol@dds.nl>, 
+                        Philip Edelbrock <phil@netroedge.com>,
+                        Dan Eaton <dan.eaton@rocketlogix.com>
+    Ported to Linux 2.6 by Aurelien Jarno <aurel32@debian.org> with 
+    the help of Jean Delvare <khali@linux-fr.org>
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+    
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+/* A few notes about the PCF8574:
+
+* The PCF8574 is an 8-bit I/O expander for the I2C bus produced by
+  Philips Semiconductors.  It is designed to provide a byte I2C
+  interface to up to 8 separate devices.
+  
+* The PCF8574 appears as a very simple SMBus device which can be
+  read from or written to with SMBUS byte read/write accesses.
+
+  --Dan
+
+*/
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/i2c-sensor.h>
+
+/* Addresses to scan */
+static unsigned short normal_i2c[] = { 0x20, 0x21, 0x22, 0x23, 0x24, 0x25, 0x26, 0x27,
+					0x38, 0x39, 0x3a, 0x3b, 0x3c, 0x3d, 0x3e, 0x3f,
+					I2C_CLIENT_END };
+static unsigned int normal_isa[] = { I2C_CLIENT_ISA_END };
+
+/* Insmod parameters */
+SENSORS_INSMOD_2(pcf8574, pcf8574a);
+
+/* Initial values */
+#define PCF8574_INIT 255	/* All outputs on (input mode) */
+
+/* Each client has this additional data */
+struct pcf8574_data {
+	struct i2c_client client;
+
+	u8 read, write;			/* Register values */
+};
+
+static int pcf8574_attach_adapter(struct i2c_adapter *adapter);
+static int pcf8574_detect(struct i2c_adapter *adapter, int address, int kind);
+static int pcf8574_detach_client(struct i2c_client *client);
+static void pcf8574_init_client(struct i2c_client *client);
+
+/* This is the driver that will be inserted */
+static struct i2c_driver pcf8574_driver = {
+	.owner		= THIS_MODULE,
+	.name		= "pcf8574",
+	.id		= I2C_DRIVERID_PCF8574,
+	.flags		= I2C_DF_NOTIFY,
+	.attach_adapter	= pcf8574_attach_adapter,
+	.detach_client	= pcf8574_detach_client,
+};
+
+/* following are the sysfs callback functions */
+static ssize_t show_read(struct device *dev, char *buf)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct pcf8574_data *data = i2c_get_clientdata(client);
+	data->read = i2c_smbus_read_byte(client); 
+	return sprintf(buf, "%u\n", data->read);
+}
+
+static DEVICE_ATTR(read, S_IRUGO, show_read, NULL);
+
+static ssize_t show_write(struct device *dev, char *buf)
+{
+	struct pcf8574_data *data = i2c_get_clientdata(to_i2c_client(dev));
+	return sprintf(buf, "%u\n", data->write);
+}
+
+static ssize_t set_write(struct device *dev, const char *buf,
+			 size_t count)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct pcf8574_data *data = i2c_get_clientdata(client);
+	unsigned long val = simple_strtoul(buf, NULL, 10);
+
+	if (val > 0xff)
+		return -EINVAL;
+
+	data->write = val;
+	i2c_smbus_write_byte(client, data->write);
+	return count;
+}
+
+static DEVICE_ATTR(write, S_IWUSR | S_IRUGO, show_write, set_write);
+
+/*
+ * Real code
+ */
+
+static int pcf8574_attach_adapter(struct i2c_adapter *adapter)
+{
+	return i2c_detect(adapter, &addr_data, pcf8574_detect);
+}
+
+/* This function is called by i2c_detect */
+int pcf8574_detect(struct i2c_adapter *adapter, int address, int kind)
+{
+	struct i2c_client *new_client;
+	struct pcf8574_data *data;
+	int err = 0;
+	const char *client_name = "";
+
+	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE))
+		goto exit;
+
+	/* OK. For now, we presume we have a valid client. We now create the
+	   client structure, even though we cannot fill it completely yet. */
+	if (!(data = kmalloc(sizeof(struct pcf8574_data), GFP_KERNEL))) {
+		err = -ENOMEM;
+		goto exit;
+	}
+	memset(data, 0, sizeof(struct pcf8574_data));
+
+	new_client = &data->client;
+	i2c_set_clientdata(new_client, data);
+	new_client->addr = address;
+	new_client->adapter = adapter;
+	new_client->driver = &pcf8574_driver;
+	new_client->flags = 0;
+
+	/* Now, we would do the remaining detection. But the PCF8574 is plainly
+	   impossible to detect! Stupid chip. */
+
+	/* Determine the chip type */
+	if (kind <= 0) {
+		if (address >= 0x38 && address <= 0x3f)
+			kind = pcf8574a;
+		else
+			kind = pcf8574;
+	}
+
+	if (kind == pcf8574a)
+		client_name = "pcf8574a";
+	else
+		client_name = "pcf8574";
+
+	/* Fill in the remaining client fields and put it into the global list */
+	strlcpy(new_client->name, client_name, I2C_NAME_SIZE);
+
+	/* Tell the I2C layer a new client has arrived */
+	if ((err = i2c_attach_client(new_client)))
+		goto exit_free;
+	
+	/* Initialize the PCF8574 chip */
+	pcf8574_init_client(new_client);
+
+	/* Register sysfs hooks */
+	device_create_file(&new_client->dev, &dev_attr_read);
+	device_create_file(&new_client->dev, &dev_attr_write);
+	return 0;
+
+/* OK, this is not exactly good programming practice, usually. But it is
+   very code-efficient in this case. */
+
+      exit_free:
+	kfree(data);
+      exit:
+	return err;
+}
+
+static int pcf8574_detach_client(struct i2c_client *client)
+{
+	int err;
+
+	if ((err = i2c_detach_client(client))) {
+		dev_err(&client->dev,
+			"Client deregistration failed, client not detached.\n");
+		return err;
+	}
+
+	kfree(i2c_get_clientdata(client));
+	return 0;
+}
+
+/* Called when we have found a new PCF8574. */
+static void pcf8574_init_client(struct i2c_client *client)
+{
+	struct pcf8574_data *data = i2c_get_clientdata(client);
+	data->write = PCF8574_INIT;
+	i2c_smbus_write_byte(client, data->write);
+}
+
+static int __init pcf8574_init(void)
+{
+	return i2c_add_driver(&pcf8574_driver);
+}
+
+static void __exit pcf8574_exit(void)
+{
+	i2c_del_driver(&pcf8574_driver);
+}
+
+
+MODULE_AUTHOR
+    ("Frodo Looijaard <frodol@dds.nl>, "
+     "Philip Edelbrock <phil@netroedge.com>, "
+     "Dan Eaton <dan.eaton@rocketlogix.com> "
+     "and Aurelien Jarno <aurelien@aurel32.net>");
+MODULE_DESCRIPTION("PCF8574 driver");
+MODULE_LICENSE("GPL");
+
+module_init(pcf8574_init);
+module_exit(pcf8574_exit);
diff --git a/drivers/i2c/chips/pcf8591.c b/drivers/i2c/chips/pcf8591.c
new file mode 100644
index 00000000000..b6b927d8b37
--- /dev/null
+++ b/drivers/i2c/chips/pcf8591.c
@@ -0,0 +1,316 @@
+/*
+    pcf8591.c - Part of lm_sensors, Linux kernel modules for hardware
+                monitoring
+    Copyright (C) 2001-2004 Aurelien Jarno <aurelien@aurel32.net>
+    Ported to Linux 2.6 by Aurelien Jarno <aurelien@aurel32.net> with 
+    the help of Jean Delvare <khali@linux-fr.org>
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/i2c-sensor.h>
+
+/* Addresses to scan */
+static unsigned short normal_i2c[] = { 0x48, 0x49, 0x4a, 0x4b, 0x4c,
+					0x4d, 0x4e, 0x4f, I2C_CLIENT_END };
+static unsigned int normal_isa[] = { I2C_CLIENT_ISA_END };
+
+/* Insmod parameters */
+SENSORS_INSMOD_1(pcf8591);
+
+static int input_mode;
+module_param(input_mode, int, 0);
+MODULE_PARM_DESC(input_mode,
+	"Analog input mode:\n"
+	" 0 = four single ended inputs\n"
+	" 1 = three differential inputs\n"
+	" 2 = single ended and differential mixed\n"
+	" 3 = two differential inputs\n");
+
+/* The PCF8591 control byte
+      7    6    5    4    3    2    1    0  
+   |  0 |AOEF|   AIP   |  0 |AINC|  AICH   | */
+
+/* Analog Output Enable Flag (analog output active if 1) */
+#define PCF8591_CONTROL_AOEF		0x40
+					
+/* Analog Input Programming 
+   0x00 = four single ended inputs
+   0x10 = three differential inputs
+   0x20 = single ended and differential mixed
+   0x30 = two differential inputs */
+#define PCF8591_CONTROL_AIP_MASK	0x30
+
+/* Autoincrement Flag (switch on if 1) */
+#define PCF8591_CONTROL_AINC		0x04
+
+/* Channel selection
+   0x00 = channel 0 
+   0x01 = channel 1
+   0x02 = channel 2
+   0x03 = channel 3 */
+#define PCF8591_CONTROL_AICH_MASK	0x03
+
+/* Initial values */
+#define PCF8591_INIT_CONTROL	((input_mode << 4) | PCF8591_CONTROL_AOEF)
+#define PCF8591_INIT_AOUT	0	/* DAC out = 0 */
+
+/* Conversions */
+#define REG_TO_SIGNED(reg)	(((reg) & 0x80)?((reg) - 256):(reg))
+
+struct pcf8591_data {
+	struct i2c_client client;
+	struct semaphore update_lock;
+
+	u8 control;
+	u8 aout;
+};
+
+static int pcf8591_attach_adapter(struct i2c_adapter *adapter);
+static int pcf8591_detect(struct i2c_adapter *adapter, int address, int kind);
+static int pcf8591_detach_client(struct i2c_client *client);
+static void pcf8591_init_client(struct i2c_client *client);
+static int pcf8591_read_channel(struct device *dev, int channel);
+
+/* This is the driver that will be inserted */
+static struct i2c_driver pcf8591_driver = {
+	.owner		= THIS_MODULE,
+	.name		= "pcf8591",
+	.id		= I2C_DRIVERID_PCF8591,
+	.flags		= I2C_DF_NOTIFY,
+	.attach_adapter	= pcf8591_attach_adapter,
+	.detach_client	= pcf8591_detach_client,
+};
+
+/* following are the sysfs callback functions */
+#define show_in_channel(channel)					\
+static ssize_t show_in##channel##_input(struct device *dev, char *buf)	\
+{									\
+	return sprintf(buf, "%d\n", pcf8591_read_channel(dev, channel));\
+}									\
+static DEVICE_ATTR(in##channel##_input, S_IRUGO,			\
+		   show_in##channel##_input, NULL);
+
+show_in_channel(0);
+show_in_channel(1);
+show_in_channel(2);
+show_in_channel(3);
+
+static ssize_t show_out0_ouput(struct device *dev, char *buf)
+{
+	struct pcf8591_data *data = i2c_get_clientdata(to_i2c_client(dev));
+	return sprintf(buf, "%d\n", data->aout * 10);
+}
+
+static ssize_t set_out0_output(struct device *dev, const char *buf, size_t count)
+{
+	unsigned int value;
+	struct i2c_client *client = to_i2c_client(dev);
+	struct pcf8591_data *data = i2c_get_clientdata(client);
+	if ((value = (simple_strtoul(buf, NULL, 10) + 5) / 10) <= 255) {
+		data->aout = value;
+		i2c_smbus_write_byte_data(client, data->control, data->aout);
+		return count;
+	}
+	return -EINVAL;
+}
+
+static DEVICE_ATTR(out0_output, S_IWUSR | S_IRUGO, 
+		   show_out0_ouput, set_out0_output);
+
+static ssize_t show_out0_enable(struct device *dev, char *buf)
+{
+	struct pcf8591_data *data = i2c_get_clientdata(to_i2c_client(dev));
+	return sprintf(buf, "%u\n", !(!(data->control & PCF8591_CONTROL_AOEF)));
+}
+
+static ssize_t set_out0_enable(struct device *dev, const char *buf, size_t count)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct pcf8591_data *data = i2c_get_clientdata(client);
+	unsigned long val = simple_strtoul(buf, NULL, 10);
+
+	down(&data->update_lock);
+	if (val)
+		data->control |= PCF8591_CONTROL_AOEF;
+	else
+		data->control &= ~PCF8591_CONTROL_AOEF;
+	i2c_smbus_write_byte(client, data->control);
+	up(&data->update_lock);
+	return count;
+}
+
+static DEVICE_ATTR(out0_enable, S_IWUSR | S_IRUGO, 
+		   show_out0_enable, set_out0_enable);
+
+/*
+ * Real code
+ */
+static int pcf8591_attach_adapter(struct i2c_adapter *adapter)
+{
+	return i2c_detect(adapter, &addr_data, pcf8591_detect);
+}
+
+/* This function is called by i2c_detect */
+int pcf8591_detect(struct i2c_adapter *adapter, int address, int kind)
+{
+	struct i2c_client *new_client;
+	struct pcf8591_data *data;
+	int err = 0;
+
+	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE
+				     | I2C_FUNC_SMBUS_WRITE_BYTE_DATA))
+		goto exit;
+
+	/* OK. For now, we presume we have a valid client. We now create the
+	   client structure, even though we cannot fill it completely yet. */
+	if (!(data = kmalloc(sizeof(struct pcf8591_data), GFP_KERNEL))) {
+		err = -ENOMEM;
+		goto exit;
+	}
+	memset(data, 0, sizeof(struct pcf8591_data));
+	
+	new_client = &data->client;
+	i2c_set_clientdata(new_client, data);
+	new_client->addr = address;
+	new_client->adapter = adapter;
+	new_client->driver = &pcf8591_driver;
+	new_client->flags = 0;
+
+	/* Now, we would do the remaining detection. But the PCF8591 is plainly
+	   impossible to detect! Stupid chip. */
+
+	/* Determine the chip type - only one kind supported! */
+	if (kind <= 0)
+		kind = pcf8591;
+
+	/* Fill in the remaining client fields and put it into the global 
+	   list */
+	strlcpy(new_client->name, "pcf8591", I2C_NAME_SIZE);
+	init_MUTEX(&data->update_lock);
+
+	/* Tell the I2C layer a new client has arrived */
+	if ((err = i2c_attach_client(new_client)))
+		goto exit_kfree;
+
+	/* Initialize the PCF8591 chip */
+	pcf8591_init_client(new_client);
+
+	/* Register sysfs hooks */
+	device_create_file(&new_client->dev, &dev_attr_out0_enable);
+	device_create_file(&new_client->dev, &dev_attr_out0_output);
+	device_create_file(&new_client->dev, &dev_attr_in0_input);
+	device_create_file(&new_client->dev, &dev_attr_in1_input);
+
+	/* Register input2 if not in "two differential inputs" mode */
+	if (input_mode != 3 )
+		device_create_file(&new_client->dev, &dev_attr_in2_input);
+		
+	/* Register input3 only in "four single ended inputs" mode */
+	if (input_mode == 0)
+		device_create_file(&new_client->dev, &dev_attr_in3_input);
+	
+	return 0;
+	
+	/* OK, this is not exactly good programming practice, usually. But it is
+	   very code-efficient in this case. */
+
+exit_kfree:
+	kfree(data);
+exit:
+	return err;
+}
+
+static int pcf8591_detach_client(struct i2c_client *client)
+{
+	int err;
+
+	if ((err = i2c_detach_client(client))) {
+		dev_err(&client->dev,
+			"Client deregistration failed, client not detached.\n");
+		return err;
+	}
+
+	kfree(i2c_get_clientdata(client));
+	return 0;
+}
+
+/* Called when we have found a new PCF8591. */
+static void pcf8591_init_client(struct i2c_client *client)
+{
+	struct pcf8591_data *data = i2c_get_clientdata(client);
+	data->control = PCF8591_INIT_CONTROL;
+	data->aout = PCF8591_INIT_AOUT;
+
+	i2c_smbus_write_byte_data(client, data->control, data->aout);
+	
+	/* The first byte transmitted contains the conversion code of the 
+	   previous read cycle. FLUSH IT! */
+	i2c_smbus_read_byte(client);
+}
+
+static int pcf8591_read_channel(struct device *dev, int channel)
+{
+	u8 value;
+	struct i2c_client *client = to_i2c_client(dev);
+	struct pcf8591_data *data = i2c_get_clientdata(client);
+
+	down(&data->update_lock);
+
+	if ((data->control & PCF8591_CONTROL_AICH_MASK) != channel) {
+		data->control = (data->control & ~PCF8591_CONTROL_AICH_MASK)
+			      | channel;
+		i2c_smbus_write_byte(client, data->control);
+	
+		/* The first byte transmitted contains the conversion code of 
+		   the previous read cycle. FLUSH IT! */
+		i2c_smbus_read_byte(client);
+	}
+	value = i2c_smbus_read_byte(client);
+
+	up(&data->update_lock);
+
+	if ((channel == 2 && input_mode == 2) ||
+	    (channel != 3 && (input_mode == 1 || input_mode == 3)))
+		return (10 * REG_TO_SIGNED(value));
+	else
+		return (10 * value);
+}
+
+static int __init pcf8591_init(void)
+{
+	if (input_mode < 0 || input_mode > 3) {
+		printk(KERN_WARNING "pcf8591: invalid input_mode (%d)\n",
+		       input_mode);
+		input_mode = 0;
+	}
+	return i2c_add_driver(&pcf8591_driver);
+}
+
+static void __exit pcf8591_exit(void)
+{
+	i2c_del_driver(&pcf8591_driver);
+}
+
+MODULE_AUTHOR("Aurelien Jarno <aurelien@aurel32.net>");
+MODULE_DESCRIPTION("PCF8591 driver");
+MODULE_LICENSE("GPL");
+
+module_init(pcf8591_init);
+module_exit(pcf8591_exit);
diff --git a/drivers/i2c/chips/rtc8564.c b/drivers/i2c/chips/rtc8564.c
new file mode 100644
index 00000000000..5a9deddb626
--- /dev/null
+++ b/drivers/i2c/chips/rtc8564.c
@@ -0,0 +1,394 @@
+/*
+ *  linux/drivers/i2c/chips/rtc8564.c
+ *
+ *  Copyright (C) 2002-2004 Stefan Eletzhofer
+ *
+ *	based on linux/drivers/acron/char/pcf8583.c
+ *  Copyright (C) 2000 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Driver for system3's EPSON RTC 8564 chip
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/i2c.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/rtc.h>		/* get the user-level API */
+#include <linux/init.h>
+#include <linux/init.h>
+
+#include "rtc8564.h"
+
+#ifdef DEBUG
+# define _DBG(x, fmt, args...) do{ if (debug>=x) printk(KERN_DEBUG"%s: " fmt "\n", __FUNCTION__, ##args); } while(0);
+#else
+# define _DBG(x, fmt, args...) do { } while(0);
+#endif
+
+#define _DBGRTCTM(x, rtctm) if (debug>=x) printk("%s: secs=%d, mins=%d, hours=%d, mday=%d, " \
+			"mon=%d, year=%d, wday=%d VL=%d\n", __FUNCTION__, \
+			(rtctm).secs, (rtctm).mins, (rtctm).hours, (rtctm).mday, \
+			(rtctm).mon, (rtctm).year, (rtctm).wday, (rtctm).vl);
+
+struct rtc8564_data {
+	struct i2c_client client;
+	u16 ctrl;
+};
+
+static inline u8 _rtc8564_ctrl1(struct i2c_client *client)
+{
+	struct rtc8564_data *data = i2c_get_clientdata(client);
+	return data->ctrl & 0xff;
+}
+static inline u8 _rtc8564_ctrl2(struct i2c_client *client)
+{
+	struct rtc8564_data *data = i2c_get_clientdata(client);
+	return (data->ctrl & 0xff00) >> 8;
+}
+
+#define CTRL1(c) _rtc8564_ctrl1(c)
+#define CTRL2(c) _rtc8564_ctrl2(c)
+
+#define BCD_TO_BIN(val) (((val)&15) + ((val)>>4)*10)
+#define BIN_TO_BCD(val) ((((val)/10)<<4) + (val)%10)
+
+static int debug;;
+module_param(debug, int, S_IRUGO | S_IWUSR);
+
+static struct i2c_driver rtc8564_driver;
+
+static unsigned short ignore[] = { I2C_CLIENT_END };
+static unsigned short normal_addr[] = { 0x51, I2C_CLIENT_END };
+
+static struct i2c_client_address_data addr_data = {
+	.normal_i2c		= normal_addr,
+	.normal_i2c_range	= ignore,
+	.probe			= ignore,
+	.probe_range		= ignore,
+	.ignore			= ignore,
+	.ignore_range		= ignore,
+	.force			= ignore,
+};
+
+static int rtc8564_read_mem(struct i2c_client *client, struct mem *mem);
+static int rtc8564_write_mem(struct i2c_client *client, struct mem *mem);
+
+static int rtc8564_read(struct i2c_client *client, unsigned char adr,
+			unsigned char *buf, unsigned char len)
+{
+	int ret = -EIO;
+	unsigned char addr[1] = { adr };
+	struct i2c_msg msgs[2] = {
+		{client->addr, 0, 1, addr},
+		{client->addr, I2C_M_RD, len, buf}
+	};
+
+	_DBG(1, "client=%p, adr=%d, buf=%p, len=%d", client, adr, buf, len);
+
+	if (!buf) {
+		ret = -EINVAL;
+		goto done;
+	}
+
+	ret = i2c_transfer(client->adapter, msgs, 2);
+	if (ret == 2) {
+		ret = 0;
+	}
+
+done:
+	return ret;
+}
+
+static int rtc8564_write(struct i2c_client *client, unsigned char adr,
+			 unsigned char *data, unsigned char len)
+{
+	int ret = 0;
+	unsigned char _data[16];
+	struct i2c_msg wr;
+	int i;
+
+	if (!data || len > 15) {
+		ret = -EINVAL;
+		goto done;
+	}
+
+	_DBG(1, "client=%p, adr=%d, buf=%p, len=%d", client, adr, data, len);
+
+	_data[0] = adr;
+	for (i = 0; i < len; i++) {
+		_data[i + 1] = data[i];
+		_DBG(5, "data[%d] = 0x%02x (%d)", i, data[i], data[i]);
+	}
+
+	wr.addr = client->addr;
+	wr.flags = 0;
+	wr.len = len + 1;
+	wr.buf = _data;
+
+	ret = i2c_transfer(client->adapter, &wr, 1);
+	if (ret == 1) {
+		ret = 0;
+	}
+
+done:
+	return ret;
+}
+
+static int rtc8564_attach(struct i2c_adapter *adap, int addr, int kind)
+{
+	int ret;
+	struct i2c_client *new_client;
+	struct rtc8564_data *d;
+	unsigned char data[10];
+	unsigned char ad[1] = { 0 };
+	struct i2c_msg ctrl_wr[1] = {
+		{addr, 0, 2, data}
+	};
+	struct i2c_msg ctrl_rd[2] = {
+		{addr, 0, 1, ad},
+		{addr, I2C_M_RD, 2, data}
+	};
+
+	d = kmalloc(sizeof(struct rtc8564_data), GFP_KERNEL);
+	if (!d) {
+		ret = -ENOMEM;
+		goto done;
+	}
+	memset(d, 0, sizeof(struct rtc8564_data));
+	new_client = &d->client;
+
+	strlcpy(new_client->name, "RTC8564", I2C_NAME_SIZE);
+	i2c_set_clientdata(new_client, d);
+	new_client->flags = I2C_CLIENT_ALLOW_USE | I2C_DF_NOTIFY;
+	new_client->addr = addr;
+	new_client->adapter = adap;
+	new_client->driver = &rtc8564_driver;
+
+	_DBG(1, "client=%p", new_client);
+
+	/* init ctrl1 reg */
+	data[0] = 0;
+	data[1] = 0;
+	ret = i2c_transfer(new_client->adapter, ctrl_wr, 1);
+	if (ret != 1) {
+		printk(KERN_INFO "rtc8564: cant init ctrl1\n");
+		ret = -ENODEV;
+		goto done;
+	}
+
+	/* read back ctrl1 and ctrl2 */
+	ret = i2c_transfer(new_client->adapter, ctrl_rd, 2);
+	if (ret != 2) {
+		printk(KERN_INFO "rtc8564: cant read ctrl\n");
+		ret = -ENODEV;
+		goto done;
+	}
+
+	d->ctrl = data[0] | (data[1] << 8);
+
+	_DBG(1, "RTC8564_REG_CTRL1=%02x, RTC8564_REG_CTRL2=%02x",
+	     data[0], data[1]);
+
+	ret = i2c_attach_client(new_client);
+done:
+	if (ret) {
+		kfree(d);
+	}
+	return ret;
+}
+
+static int rtc8564_probe(struct i2c_adapter *adap)
+{
+	return i2c_probe(adap, &addr_data, rtc8564_attach);
+}
+
+static int rtc8564_detach(struct i2c_client *client)
+{
+	i2c_detach_client(client);
+	kfree(i2c_get_clientdata(client));
+	return 0;
+}
+
+static int rtc8564_get_datetime(struct i2c_client *client, struct rtc_tm *dt)
+{
+	int ret = -EIO;
+	unsigned char buf[15];
+
+	_DBG(1, "client=%p, dt=%p", client, dt);
+
+	if (!dt)
+		return -EINVAL;
+
+	memset(buf, 0, sizeof(buf));
+
+	ret = rtc8564_read(client, 0, buf, 15);
+	if (ret)
+		return ret;
+
+	/* century stored in minute alarm reg */
+	dt->year = BCD_TO_BIN(buf[RTC8564_REG_YEAR]);
+	dt->year += 100 * BCD_TO_BIN(buf[RTC8564_REG_AL_MIN] & 0x3f);
+	dt->mday = BCD_TO_BIN(buf[RTC8564_REG_DAY] & 0x3f);
+	dt->wday = BCD_TO_BIN(buf[RTC8564_REG_WDAY] & 7);
+	dt->mon = BCD_TO_BIN(buf[RTC8564_REG_MON_CENT] & 0x1f);
+
+	dt->secs = BCD_TO_BIN(buf[RTC8564_REG_SEC] & 0x7f);
+	dt->vl = (buf[RTC8564_REG_SEC] & 0x80) == 0x80;
+	dt->mins = BCD_TO_BIN(buf[RTC8564_REG_MIN] & 0x7f);
+	dt->hours = BCD_TO_BIN(buf[RTC8564_REG_HR] & 0x3f);
+
+	_DBGRTCTM(2, *dt);
+
+	return 0;
+}
+
+static int
+rtc8564_set_datetime(struct i2c_client *client, struct rtc_tm *dt, int datetoo)
+{
+	int ret, len = 5;
+	unsigned char buf[15];
+
+	_DBG(1, "client=%p, dt=%p", client, dt);
+
+	if (!dt)
+		return -EINVAL;
+
+	_DBGRTCTM(2, *dt);
+
+	buf[RTC8564_REG_CTRL1] = CTRL1(client) | RTC8564_CTRL1_STOP;
+	buf[RTC8564_REG_CTRL2] = CTRL2(client);
+	buf[RTC8564_REG_SEC] = BIN_TO_BCD(dt->secs);
+	buf[RTC8564_REG_MIN] = BIN_TO_BCD(dt->mins);
+	buf[RTC8564_REG_HR] = BIN_TO_BCD(dt->hours);
+
+	if (datetoo) {
+		len += 5;
+		buf[RTC8564_REG_DAY] = BIN_TO_BCD(dt->mday);
+		buf[RTC8564_REG_WDAY] = BIN_TO_BCD(dt->wday);
+		buf[RTC8564_REG_MON_CENT] = BIN_TO_BCD(dt->mon) & 0x1f;
+		/* century stored in minute alarm reg */
+		buf[RTC8564_REG_YEAR] = BIN_TO_BCD(dt->year % 100);
+		buf[RTC8564_REG_AL_MIN] = BIN_TO_BCD(dt->year / 100);
+	}
+
+	ret = rtc8564_write(client, 0, buf, len);
+	if (ret) {
+		_DBG(1, "error writing data! %d", ret);
+	}
+
+	buf[RTC8564_REG_CTRL1] = CTRL1(client);
+	ret = rtc8564_write(client, 0, buf, 1);
+	if (ret) {
+		_DBG(1, "error writing data! %d", ret);
+	}
+
+	return ret;
+}
+
+static int rtc8564_get_ctrl(struct i2c_client *client, unsigned int *ctrl)
+{
+	struct rtc8564_data *data = i2c_get_clientdata(client);
+
+	if (!ctrl)
+		return -1;
+
+	*ctrl = data->ctrl;
+	return 0;
+}
+
+static int rtc8564_set_ctrl(struct i2c_client *client, unsigned int *ctrl)
+{
+	struct rtc8564_data *data = i2c_get_clientdata(client);
+	unsigned char buf[2];
+
+	if (!ctrl)
+		return -1;
+
+	buf[0] = *ctrl & 0xff;
+	buf[1] = (*ctrl & 0xff00) >> 8;
+	data->ctrl = *ctrl;
+
+	return rtc8564_write(client, 0, buf, 2);
+}
+
+static int rtc8564_read_mem(struct i2c_client *client, struct mem *mem)
+{
+
+	if (!mem)
+		return -EINVAL;
+
+	return rtc8564_read(client, mem->loc, mem->data, mem->nr);
+}
+
+static int rtc8564_write_mem(struct i2c_client *client, struct mem *mem)
+{
+
+	if (!mem)
+		return -EINVAL;
+
+	return rtc8564_write(client, mem->loc, mem->data, mem->nr);
+}
+
+static int
+rtc8564_command(struct i2c_client *client, unsigned int cmd, void *arg)
+{
+
+	_DBG(1, "cmd=%d", cmd);
+
+	switch (cmd) {
+	case RTC_GETDATETIME:
+		return rtc8564_get_datetime(client, arg);
+
+	case RTC_SETTIME:
+		return rtc8564_set_datetime(client, arg, 0);
+
+	case RTC_SETDATETIME:
+		return rtc8564_set_datetime(client, arg, 1);
+
+	case RTC_GETCTRL:
+		return rtc8564_get_ctrl(client, arg);
+
+	case RTC_SETCTRL:
+		return rtc8564_set_ctrl(client, arg);
+
+	case MEM_READ:
+		return rtc8564_read_mem(client, arg);
+
+	case MEM_WRITE:
+		return rtc8564_write_mem(client, arg);
+
+	default:
+		return -EINVAL;
+	}
+}
+
+static struct i2c_driver rtc8564_driver = {
+	.owner		= THIS_MODULE,
+	.name		= "RTC8564",
+	.id		= I2C_DRIVERID_RTC8564,
+	.flags		= I2C_DF_NOTIFY,
+	.attach_adapter = rtc8564_probe,
+	.detach_client	= rtc8564_detach,
+	.command	= rtc8564_command
+};
+
+static __init int rtc8564_init(void)
+{
+	return i2c_add_driver(&rtc8564_driver);
+}
+
+static __exit void rtc8564_exit(void)
+{
+	i2c_del_driver(&rtc8564_driver);
+}
+
+MODULE_AUTHOR("Stefan Eletzhofer <Stefan.Eletzhofer@eletztrick.de>");
+MODULE_DESCRIPTION("EPSON RTC8564 Driver");
+MODULE_LICENSE("GPL");
+
+module_init(rtc8564_init);
+module_exit(rtc8564_exit);
diff --git a/drivers/i2c/chips/rtc8564.h b/drivers/i2c/chips/rtc8564.h
new file mode 100644
index 00000000000..e5342d10b8f
--- /dev/null
+++ b/drivers/i2c/chips/rtc8564.h
@@ -0,0 +1,78 @@
+/*
+ *  linux/drivers/i2c/chips/rtc8564.h
+ *
+ *  Copyright (C) 2002-2004 Stefan Eletzhofer
+ *
+ *	based on linux/drivers/acron/char/pcf8583.h
+ *  Copyright (C) 2000 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+struct rtc_tm {
+	unsigned char	secs;
+	unsigned char	mins;
+	unsigned char	hours;
+	unsigned char	mday;
+	unsigned char	mon;
+	unsigned short	year; /* xxxx 4 digits :) */
+	unsigned char	wday;
+	unsigned char	vl;
+};
+
+struct mem {
+	unsigned int	loc;
+	unsigned int	nr;
+	unsigned char	*data;
+};
+
+#define RTC_GETDATETIME	0
+#define RTC_SETTIME	1
+#define RTC_SETDATETIME	2
+#define RTC_GETCTRL	3
+#define RTC_SETCTRL	4
+#define MEM_READ	5
+#define MEM_WRITE	6
+
+#define RTC8564_REG_CTRL1		0x0 /* T  0 S 0 | T 0 0 0 */
+#define RTC8564_REG_CTRL2		0x1 /* 0  0 0 TI/TP | AF TF AIE TIE */
+#define RTC8564_REG_SEC			0x2 /* VL 4 2 1 | 8 4 2 1 */
+#define RTC8564_REG_MIN			0x3 /* x  4 2 1 | 8 4 2 1 */
+#define RTC8564_REG_HR			0x4 /* x  x 2 1 | 8 4 2 1 */
+#define RTC8564_REG_DAY			0x5 /* x  x 2 1 | 8 4 2 1 */
+#define RTC8564_REG_WDAY		0x6 /* x  x x x | x 4 2 1 */
+#define RTC8564_REG_MON_CENT	0x7 /* C  x x 1 | 8 4 2 1 */
+#define RTC8564_REG_YEAR		0x8 /* 8  4 2 1 | 8 4 2 1 */
+#define RTC8564_REG_AL_MIN		0x9 /* AE 4 2 1 | 8 4 2 1 */
+#define RTC8564_REG_AL_HR		0xa /* AE 4 2 1 | 8 4 2 1 */
+#define RTC8564_REG_AL_DAY		0xb /* AE x 2 1 | 8 4 2 1 */
+#define RTC8564_REG_AL_WDAY		0xc /* AE x x x | x 4 2 1 */
+#define RTC8564_REG_CLKOUT		0xd /* FE x x x | x x FD1 FD0 */
+#define RTC8564_REG_TCTL		0xe /* TE x x x | x x FD1 FD0 */
+#define RTC8564_REG_TIMER		0xf /* 8 bit binary */
+
+/* Control reg */
+#define RTC8564_CTRL1_TEST1		(1<<3)
+#define RTC8564_CTRL1_STOP		(1<<5)
+#define RTC8564_CTRL1_TEST2		(1<<7)
+
+#define RTC8564_CTRL2_TIE		(1<<0)
+#define RTC8564_CTRL2_AIE		(1<<1)
+#define RTC8564_CTRL2_TF		(1<<2)
+#define RTC8564_CTRL2_AF		(1<<3)
+#define RTC8564_CTRL2_TI_TP		(1<<4)
+
+/* CLKOUT frequencies */
+#define RTC8564_FD_32768HZ		(0x0)
+#define RTC8564_FD_1024HZ		(0x1)
+#define RTC8564_FD_32			(0x2)
+#define RTC8564_FD_1HZ			(0x3)
+
+/* Timer CTRL */
+#define RTC8564_TD_4096HZ		(0x0)
+#define RTC8564_TD_64HZ			(0x1)
+#define RTC8564_TD_1HZ			(0x2)
+#define RTC8564_TD_1_60HZ		(0x3)
+
+#define I2C_DRIVERID_RTC8564 0xf000
diff --git a/drivers/i2c/chips/sis5595.c b/drivers/i2c/chips/sis5595.c
new file mode 100644
index 00000000000..7ea84532df3
--- /dev/null
+++ b/drivers/i2c/chips/sis5595.c
@@ -0,0 +1,816 @@
+/*
+    sis5595.c - Part of lm_sensors, Linux kernel modules
+		for hardware monitoring
+
+    Copyright (C) 1998 - 2001 Frodo Looijaard <frodol@dds.nl>,
+			Kyösti Mälkki <kmalkki@cc.hut.fi>, and
+			Mark D. Studebaker <mdsxyz123@yahoo.com>
+    Ported to Linux 2.6 by Aurelien Jarno <aurelien@aurel32.net> with
+    the help of Jean Delvare <khali@linux-fr.org>
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+/*
+   SiS southbridge has a LM78-like chip integrated on the same IC.
+   This driver is a customized copy of lm78.c
+   
+   Supports following revisions:
+	Version		PCI ID		PCI Revision
+	1		1039/0008	AF or less
+	2		1039/0008	B0 or greater
+
+   Note: these chips contain a 0008 device which is incompatible with the
+	 5595. We recognize these by the presence of the listed
+	 "blacklist" PCI ID and refuse to load.
+
+   NOT SUPPORTED	PCI ID		BLACKLIST PCI ID	
+	 540		0008		0540
+	 550		0008		0550
+	5513		0008		5511
+	5581		0008		5597
+	5582		0008		5597
+	5597		0008		5597
+	5598		0008		5597/5598
+	 630		0008		0630
+	 645		0008		0645
+	 730		0008		0730
+	 735		0008		0735
+*/
+
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/ioport.h>
+#include <linux/pci.h>
+#include <linux/i2c.h>
+#include <linux/i2c-sensor.h>
+#include <linux/init.h>
+#include <asm/io.h>
+
+
+/* If force_addr is set to anything different from 0, we forcibly enable
+   the device at the given address. */
+static u16 force_addr;
+module_param(force_addr, ushort, 0);
+MODULE_PARM_DESC(force_addr,
+		 "Initialize the base address of the sensors");
+
+/* Addresses to scan.
+   Note that we can't determine the ISA address until we have initialized
+   our module */
+static unsigned short normal_i2c[] = { I2C_CLIENT_END };
+static unsigned int normal_isa[] = { 0x0000, I2C_CLIENT_ISA_END };
+
+/* Insmod parameters */
+SENSORS_INSMOD_1(sis5595);
+
+/* Many SIS5595 constants specified below */
+
+/* Length of ISA address segment */
+#define SIS5595_EXTENT 8
+/* PCI Config Registers */
+#define SIS5595_REVISION_REG 0x08
+#define SIS5595_BASE_REG 0x68
+#define SIS5595_PIN_REG 0x7A
+#define SIS5595_ENABLE_REG 0x7B
+
+/* Where are the ISA address/data registers relative to the base address */
+#define SIS5595_ADDR_REG_OFFSET 5
+#define SIS5595_DATA_REG_OFFSET 6
+
+/* The SIS5595 registers */
+#define SIS5595_REG_IN_MAX(nr) (0x2b + (nr) * 2)
+#define SIS5595_REG_IN_MIN(nr) (0x2c + (nr) * 2)
+#define SIS5595_REG_IN(nr) (0x20 + (nr))
+
+#define SIS5595_REG_FAN_MIN(nr) (0x3b + (nr))
+#define SIS5595_REG_FAN(nr) (0x28 + (nr))
+
+/* On the first version of the chip, the temp registers are separate.
+   On the second version,
+   TEMP pin is shared with IN4, configured in PCI register 0x7A.
+   The registers are the same as well.
+   OVER and HYST are really MAX and MIN. */
+
+#define REV2MIN	0xb0
+#define SIS5595_REG_TEMP 	(( data->revision) >= REV2MIN) ? \
+					SIS5595_REG_IN(4) : 0x27
+#define SIS5595_REG_TEMP_OVER	(( data->revision) >= REV2MIN) ? \
+					SIS5595_REG_IN_MAX(4) : 0x39
+#define SIS5595_REG_TEMP_HYST	(( data->revision) >= REV2MIN) ? \
+					SIS5595_REG_IN_MIN(4) : 0x3a
+
+#define SIS5595_REG_CONFIG 0x40
+#define SIS5595_REG_ALARM1 0x41
+#define SIS5595_REG_ALARM2 0x42
+#define SIS5595_REG_FANDIV 0x47
+
+/* Conversions. Limit checking is only done on the TO_REG
+   variants. */
+
+/* IN: mV, (0V to 4.08V)
+   REG: 16mV/bit */
+static inline u8 IN_TO_REG(unsigned long val)
+{
+	unsigned long nval = SENSORS_LIMIT(val, 0, 4080);
+	return (nval + 8) / 16;
+}
+#define IN_FROM_REG(val) ((val) *  16)
+
+static inline u8 FAN_TO_REG(long rpm, int div)
+{
+	if (rpm <= 0)
+		return 255;
+	return SENSORS_LIMIT((1350000 + rpm * div / 2) / (rpm * div), 1, 254);
+}
+
+static inline int FAN_FROM_REG(u8 val, int div)
+{
+	return val==0 ? -1 : val==255 ? 0 : 1350000/(val*div);
+}
+
+/* TEMP: mC (-54.12C to +157.53C)
+   REG: 0.83C/bit + 52.12, two's complement  */
+static inline int TEMP_FROM_REG(s8 val)
+{
+	return val * 830 + 52120;
+}
+static inline s8 TEMP_TO_REG(int val)
+{
+	int nval = SENSORS_LIMIT(val, -54120, 157530) ;
+	return nval<0 ? (nval-5212-415)/830 : (nval-5212+415)/830;
+}
+
+/* FAN DIV: 1, 2, 4, or 8 (defaults to 2)
+   REG: 0, 1, 2, or 3 (respectively) (defaults to 1) */
+static inline u8 DIV_TO_REG(int val)
+{
+	return val==8 ? 3 : val==4 ? 2 : val==1 ? 0 : 1;
+}
+#define DIV_FROM_REG(val) (1 << (val))
+
+/* For the SIS5595, we need to keep some data in memory. That
+   data is pointed to by sis5595_list[NR]->data. The structure itself is
+   dynamically allocated, at the time when the new sis5595 client is
+   allocated. */
+struct sis5595_data {
+	struct i2c_client client;
+	struct semaphore lock;
+
+	struct semaphore update_lock;
+	char valid;		/* !=0 if following fields are valid */
+	unsigned long last_updated;	/* In jiffies */
+	char maxins;		/* == 3 if temp enabled, otherwise == 4 */
+	u8 revision;		/* Reg. value */
+
+	u8 in[5];		/* Register value */
+	u8 in_max[5];		/* Register value */
+	u8 in_min[5];		/* Register value */
+	u8 fan[2];		/* Register value */
+	u8 fan_min[2];		/* Register value */
+	s8 temp;		/* Register value */
+	s8 temp_over;		/* Register value */
+	s8 temp_hyst;		/* Register value */
+	u8 fan_div[2];		/* Register encoding, shifted right */
+	u16 alarms;		/* Register encoding, combined */
+};
+
+static struct pci_dev *s_bridge;	/* pointer to the (only) sis5595 */
+
+static int sis5595_attach_adapter(struct i2c_adapter *adapter);
+static int sis5595_detect(struct i2c_adapter *adapter, int address, int kind);
+static int sis5595_detach_client(struct i2c_client *client);
+
+static int sis5595_read_value(struct i2c_client *client, u8 register);
+static int sis5595_write_value(struct i2c_client *client, u8 register, u8 value);
+static struct sis5595_data *sis5595_update_device(struct device *dev);
+static void sis5595_init_client(struct i2c_client *client);
+
+static struct i2c_driver sis5595_driver = {
+	.owner		= THIS_MODULE,
+	.name		= "sis5595",
+	.id		= I2C_DRIVERID_SIS5595,
+	.flags		= I2C_DF_NOTIFY,
+	.attach_adapter	= sis5595_attach_adapter,
+	.detach_client	= sis5595_detach_client,
+};
+
+/* 4 Voltages */
+static ssize_t show_in(struct device *dev, char *buf, int nr)
+{
+	struct sis5595_data *data = sis5595_update_device(dev);
+	return sprintf(buf, "%d\n", IN_FROM_REG(data->in[nr]));
+}
+
+static ssize_t show_in_min(struct device *dev, char *buf, int nr)
+{
+	struct sis5595_data *data = sis5595_update_device(dev);
+	return sprintf(buf, "%d\n", IN_FROM_REG(data->in_min[nr]));
+}
+
+static ssize_t show_in_max(struct device *dev, char *buf, int nr)
+{
+	struct sis5595_data *data = sis5595_update_device(dev);
+	return sprintf(buf, "%d\n", IN_FROM_REG(data->in_max[nr]));
+}
+
+static ssize_t set_in_min(struct device *dev, const char *buf,
+	       size_t count, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct sis5595_data *data = i2c_get_clientdata(client);
+	unsigned long val = simple_strtoul(buf, NULL, 10);
+
+	down(&data->update_lock);
+	data->in_min[nr] = IN_TO_REG(val);
+	sis5595_write_value(client, SIS5595_REG_IN_MIN(nr), data->in_min[nr]);
+	up(&data->update_lock);
+	return count;
+}
+
+static ssize_t set_in_max(struct device *dev, const char *buf,
+	       size_t count, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct sis5595_data *data = i2c_get_clientdata(client);
+	unsigned long val = simple_strtoul(buf, NULL, 10);
+
+	down(&data->update_lock);
+	data->in_max[nr] = IN_TO_REG(val);
+	sis5595_write_value(client, SIS5595_REG_IN_MAX(nr), data->in_max[nr]);
+	up(&data->update_lock);
+	return count;
+}
+
+#define show_in_offset(offset)					\
+static ssize_t							\
+	show_in##offset (struct device *dev, char *buf)		\
+{								\
+	return show_in(dev, buf, offset);			\
+}								\
+static DEVICE_ATTR(in##offset##_input, S_IRUGO, 		\
+		show_in##offset, NULL);				\
+static ssize_t							\
+	show_in##offset##_min (struct device *dev, char *buf)	\
+{								\
+	return show_in_min(dev, buf, offset);			\
+}								\
+static ssize_t							\
+	show_in##offset##_max (struct device *dev, char *buf)	\
+{								\
+	return show_in_max(dev, buf, offset);			\
+}								\
+static ssize_t set_in##offset##_min (struct device *dev,	\
+		const char *buf, size_t count)			\
+{								\
+	return set_in_min(dev, buf, count, offset);		\
+}								\
+static ssize_t set_in##offset##_max (struct device *dev,	\
+		const char *buf, size_t count)			\
+{								\
+	return set_in_max(dev, buf, count, offset);		\
+}								\
+static DEVICE_ATTR(in##offset##_min, S_IRUGO | S_IWUSR,		\
+		show_in##offset##_min, set_in##offset##_min);	\
+static DEVICE_ATTR(in##offset##_max, S_IRUGO | S_IWUSR,		\
+		show_in##offset##_max, set_in##offset##_max);
+
+show_in_offset(0);
+show_in_offset(1);
+show_in_offset(2);
+show_in_offset(3);
+show_in_offset(4);
+
+/* Temperature */
+static ssize_t show_temp(struct device *dev, char *buf)
+{
+	struct sis5595_data *data = sis5595_update_device(dev);
+	return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp));
+}
+
+static ssize_t show_temp_over(struct device *dev, char *buf)
+{
+	struct sis5595_data *data = sis5595_update_device(dev);
+	return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_over));
+}
+
+static ssize_t set_temp_over(struct device *dev, const char *buf, size_t count)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct sis5595_data *data = i2c_get_clientdata(client);
+	long val = simple_strtol(buf, NULL, 10);
+
+	down(&data->update_lock);
+	data->temp_over = TEMP_TO_REG(val);
+	sis5595_write_value(client, SIS5595_REG_TEMP_OVER, data->temp_over);
+	up(&data->update_lock);
+	return count;
+}
+
+static ssize_t show_temp_hyst(struct device *dev, char *buf)
+{
+	struct sis5595_data *data = sis5595_update_device(dev);
+	return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_hyst));
+}
+
+static ssize_t set_temp_hyst(struct device *dev, const char *buf, size_t count)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct sis5595_data *data = i2c_get_clientdata(client);
+	long val = simple_strtol(buf, NULL, 10);
+
+	down(&data->update_lock);
+	data->temp_hyst = TEMP_TO_REG(val);
+	sis5595_write_value(client, SIS5595_REG_TEMP_HYST, data->temp_hyst);
+	up(&data->update_lock);
+	return count;
+}
+
+static DEVICE_ATTR(temp1_input, S_IRUGO, show_temp, NULL);
+static DEVICE_ATTR(temp1_max, S_IRUGO | S_IWUSR,
+		show_temp_over, set_temp_over);
+static DEVICE_ATTR(temp1_max_hyst, S_IRUGO | S_IWUSR,
+		show_temp_hyst, set_temp_hyst);
+
+/* 2 Fans */
+static ssize_t show_fan(struct device *dev, char *buf, int nr)
+{
+	struct sis5595_data *data = sis5595_update_device(dev);
+	return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan[nr],
+		DIV_FROM_REG(data->fan_div[nr])) );
+}
+
+static ssize_t show_fan_min(struct device *dev, char *buf, int nr)
+{
+	struct sis5595_data *data = sis5595_update_device(dev);
+	return sprintf(buf,"%d\n", FAN_FROM_REG(data->fan_min[nr],
+		DIV_FROM_REG(data->fan_div[nr])) );
+}
+
+static ssize_t set_fan_min(struct device *dev, const char *buf,
+		size_t count, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct sis5595_data *data = i2c_get_clientdata(client);
+	unsigned long val = simple_strtoul(buf, NULL, 10);
+
+	down(&data->update_lock);
+	data->fan_min[nr] = FAN_TO_REG(val, DIV_FROM_REG(data->fan_div[nr]));
+	sis5595_write_value(client, SIS5595_REG_FAN_MIN(nr), data->fan_min[nr]);
+	up(&data->update_lock);
+	return count;
+}
+
+static ssize_t show_fan_div(struct device *dev, char *buf, int nr)
+{
+	struct sis5595_data *data = sis5595_update_device(dev);
+	return sprintf(buf, "%d\n", DIV_FROM_REG(data->fan_div[nr]) );
+}
+
+/* Note: we save and restore the fan minimum here, because its value is
+   determined in part by the fan divisor.  This follows the principle of
+   least suprise; the user doesn't expect the fan minimum to change just
+   because the divisor changed. */
+static ssize_t set_fan_div(struct device *dev, const char *buf,
+	size_t count, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct sis5595_data *data = i2c_get_clientdata(client);
+	unsigned long min;
+	unsigned long val = simple_strtoul(buf, NULL, 10);
+	int reg;
+
+	down(&data->update_lock);
+	min = FAN_FROM_REG(data->fan_min[nr],
+			DIV_FROM_REG(data->fan_div[nr]));
+	reg = sis5595_read_value(client, SIS5595_REG_FANDIV);
+
+	switch (val) {
+	case 1: data->fan_div[nr] = 0; break;
+	case 2: data->fan_div[nr] = 1; break;
+	case 4: data->fan_div[nr] = 2; break;
+	case 8: data->fan_div[nr] = 3; break;
+	default:
+		dev_err(&client->dev, "fan_div value %ld not "
+			"supported. Choose one of 1, 2, 4 or 8!\n", val);
+		up(&data->update_lock);
+		return -EINVAL;
+	}
+	
+	switch (nr) {
+	case 0:
+		reg = (reg & 0xcf) | (data->fan_div[nr] << 4);
+		break;
+	case 1:
+		reg = (reg & 0x3f) | (data->fan_div[nr] << 6);
+		break;
+	}
+	sis5595_write_value(client, SIS5595_REG_FANDIV, reg);
+	data->fan_min[nr] =
+		FAN_TO_REG(min, DIV_FROM_REG(data->fan_div[nr]));
+	sis5595_write_value(client, SIS5595_REG_FAN_MIN(nr), data->fan_min[nr]);
+	up(&data->update_lock);
+	return count;
+}
+
+#define show_fan_offset(offset)						\
+static ssize_t show_fan_##offset (struct device *dev, char *buf)	\
+{									\
+	return show_fan(dev, buf, offset - 1);			\
+}									\
+static ssize_t show_fan_##offset##_min (struct device *dev, char *buf)	\
+{									\
+	return show_fan_min(dev, buf, offset - 1);			\
+}									\
+static ssize_t show_fan_##offset##_div (struct device *dev, char *buf)	\
+{									\
+	return show_fan_div(dev, buf, offset - 1);			\
+}									\
+static ssize_t set_fan_##offset##_min (struct device *dev,		\
+		const char *buf, size_t count)				\
+{									\
+	return set_fan_min(dev, buf, count, offset - 1);		\
+}									\
+static DEVICE_ATTR(fan##offset##_input, S_IRUGO, show_fan_##offset, NULL);\
+static DEVICE_ATTR(fan##offset##_min, S_IRUGO | S_IWUSR,		\
+		show_fan_##offset##_min, set_fan_##offset##_min);
+
+show_fan_offset(1);
+show_fan_offset(2);
+
+static ssize_t set_fan_1_div(struct device *dev, const char *buf,
+		size_t count)
+{
+	return set_fan_div(dev, buf, count, 0) ;
+}
+
+static ssize_t set_fan_2_div(struct device *dev, const char *buf,
+		size_t count)
+{
+	return set_fan_div(dev, buf, count, 1) ;
+}
+static DEVICE_ATTR(fan1_div, S_IRUGO | S_IWUSR,
+		show_fan_1_div, set_fan_1_div);
+static DEVICE_ATTR(fan2_div, S_IRUGO | S_IWUSR,
+		show_fan_2_div, set_fan_2_div);
+
+/* Alarms */
+static ssize_t show_alarms(struct device *dev, char *buf)
+{
+	struct sis5595_data *data = sis5595_update_device(dev);
+	return sprintf(buf, "%d\n", data->alarms);
+}
+static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL);
+ 
+/* This is called when the module is loaded */
+static int sis5595_attach_adapter(struct i2c_adapter *adapter)
+{
+	if (!(adapter->class & I2C_CLASS_HWMON))
+		return 0;
+	return i2c_detect(adapter, &addr_data, sis5595_detect);
+}
+
+int sis5595_detect(struct i2c_adapter *adapter, int address, int kind)
+{
+	int err = 0;
+	int i;
+	struct i2c_client *new_client;
+	struct sis5595_data *data;
+	char val;
+	u16 a;
+
+	/* Make sure we are probing the ISA bus!!  */
+	if (!i2c_is_isa_adapter(adapter))
+		goto exit;
+
+	if (force_addr)
+		address = force_addr & ~(SIS5595_EXTENT - 1);
+	/* Reserve the ISA region */
+	if (!request_region(address, SIS5595_EXTENT, sis5595_driver.name)) {
+		err = -EBUSY;
+		goto exit;
+	}
+	if (force_addr) {
+		dev_warn(&adapter->dev, "forcing ISA address 0x%04X\n", address);
+		if (PCIBIOS_SUCCESSFUL !=
+		    pci_write_config_word(s_bridge, SIS5595_BASE_REG, address))
+			goto exit_release;
+		if (PCIBIOS_SUCCESSFUL !=
+		    pci_read_config_word(s_bridge, SIS5595_BASE_REG, &a))
+			goto exit_release;
+		if ((a & ~(SIS5595_EXTENT - 1)) != address)
+			/* doesn't work for some chips? */
+			goto exit_release;
+	}
+
+	if (PCIBIOS_SUCCESSFUL !=
+	    pci_read_config_byte(s_bridge, SIS5595_ENABLE_REG, &val)) {
+		goto exit_release;
+	}
+	if ((val & 0x80) == 0) {
+		if (PCIBIOS_SUCCESSFUL !=
+		    pci_write_config_byte(s_bridge, SIS5595_ENABLE_REG,
+					  val | 0x80))
+			goto exit_release;
+		if (PCIBIOS_SUCCESSFUL !=
+		    pci_read_config_byte(s_bridge, SIS5595_ENABLE_REG, &val))
+			goto exit_release;
+		if ((val & 0x80) == 0) 
+			/* doesn't work for some chips! */
+			goto exit_release;
+	}
+
+	if (!(data = kmalloc(sizeof(struct sis5595_data), GFP_KERNEL))) {
+		err = -ENOMEM;
+		goto exit_release;
+	}
+	memset(data, 0, sizeof(struct sis5595_data));
+
+	new_client = &data->client;
+	new_client->addr = address;
+	init_MUTEX(&data->lock);
+	i2c_set_clientdata(new_client, data);
+	new_client->adapter = adapter;
+	new_client->driver = &sis5595_driver;
+	new_client->flags = 0;
+
+	/* Check revision and pin registers to determine whether 4 or 5 voltages */
+	pci_read_config_byte(s_bridge, SIS5595_REVISION_REG, &(data->revision));
+	/* 4 voltages, 1 temp */
+	data->maxins = 3;
+	if (data->revision >= REV2MIN) {
+		pci_read_config_byte(s_bridge, SIS5595_PIN_REG, &val);
+		if (!(val & 0x80))
+			/* 5 voltages, no temps */
+			data->maxins = 4;
+	}
+	
+	/* Fill in the remaining client fields and put it into the global list */
+	strlcpy(new_client->name, "sis5595", I2C_NAME_SIZE);
+
+	data->valid = 0;
+	init_MUTEX(&data->update_lock);
+
+	/* Tell the I2C layer a new client has arrived */
+	if ((err = i2c_attach_client(new_client)))
+		goto exit_free;
+	
+	/* Initialize the SIS5595 chip */
+	sis5595_init_client(new_client);
+
+	/* A few vars need to be filled upon startup */
+	for (i = 0; i < 2; i++) {
+		data->fan_min[i] = sis5595_read_value(new_client,
+					SIS5595_REG_FAN_MIN(i));
+	}
+
+	/* Register sysfs hooks */
+	device_create_file(&new_client->dev, &dev_attr_in0_input);
+	device_create_file(&new_client->dev, &dev_attr_in0_min);
+	device_create_file(&new_client->dev, &dev_attr_in0_max);
+	device_create_file(&new_client->dev, &dev_attr_in1_input);
+	device_create_file(&new_client->dev, &dev_attr_in1_min);
+	device_create_file(&new_client->dev, &dev_attr_in1_max);
+	device_create_file(&new_client->dev, &dev_attr_in2_input);
+	device_create_file(&new_client->dev, &dev_attr_in2_min);
+	device_create_file(&new_client->dev, &dev_attr_in2_max);
+	device_create_file(&new_client->dev, &dev_attr_in3_input);
+	device_create_file(&new_client->dev, &dev_attr_in3_min);
+	device_create_file(&new_client->dev, &dev_attr_in3_max);
+	if (data->maxins == 4) {
+		device_create_file(&new_client->dev, &dev_attr_in4_input);
+		device_create_file(&new_client->dev, &dev_attr_in4_min);
+		device_create_file(&new_client->dev, &dev_attr_in4_max);
+	}
+	device_create_file(&new_client->dev, &dev_attr_fan1_input);
+	device_create_file(&new_client->dev, &dev_attr_fan1_min);
+	device_create_file(&new_client->dev, &dev_attr_fan1_div);
+	device_create_file(&new_client->dev, &dev_attr_fan2_input);
+	device_create_file(&new_client->dev, &dev_attr_fan2_min);
+	device_create_file(&new_client->dev, &dev_attr_fan2_div);
+	device_create_file(&new_client->dev, &dev_attr_alarms);
+	if (data->maxins == 3) {
+		device_create_file(&new_client->dev, &dev_attr_temp1_input);
+		device_create_file(&new_client->dev, &dev_attr_temp1_max);
+		device_create_file(&new_client->dev, &dev_attr_temp1_max_hyst);
+	}
+	return 0;
+	
+exit_free:
+	kfree(data);
+exit_release:
+	release_region(address, SIS5595_EXTENT);
+exit:
+	return err;
+}
+
+static int sis5595_detach_client(struct i2c_client *client)
+{
+	int err;
+
+	if ((err = i2c_detach_client(client))) {
+		dev_err(&client->dev,
+		    "Client deregistration failed, client not detached.\n");
+		return err;
+	}
+
+	if (i2c_is_isa_client(client))
+		release_region(client->addr, SIS5595_EXTENT);
+
+	kfree(i2c_get_clientdata(client));
+
+	return 0;
+}
+
+
+/* ISA access must be locked explicitly. */
+static int sis5595_read_value(struct i2c_client *client, u8 reg)
+{
+	int res;
+
+	struct sis5595_data *data = i2c_get_clientdata(client);
+	down(&data->lock);
+	outb_p(reg, client->addr + SIS5595_ADDR_REG_OFFSET);
+	res = inb_p(client->addr + SIS5595_DATA_REG_OFFSET);
+	up(&data->lock);
+	return res;
+}
+
+static int sis5595_write_value(struct i2c_client *client, u8 reg, u8 value)
+{
+	struct sis5595_data *data = i2c_get_clientdata(client);
+	down(&data->lock);
+	outb_p(reg, client->addr + SIS5595_ADDR_REG_OFFSET);
+	outb_p(value, client->addr + SIS5595_DATA_REG_OFFSET);
+	up(&data->lock);
+	return 0;
+}
+
+/* Called when we have found a new SIS5595. */
+static void sis5595_init_client(struct i2c_client *client)
+{
+	u8 config = sis5595_read_value(client, SIS5595_REG_CONFIG);
+	if (!(config & 0x01))
+		sis5595_write_value(client, SIS5595_REG_CONFIG,
+				(config & 0xf7) | 0x01);
+}
+
+static struct sis5595_data *sis5595_update_device(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct sis5595_data *data = i2c_get_clientdata(client);
+	int i;
+
+	down(&data->update_lock);
+
+	if (time_after(jiffies, data->last_updated + HZ + HZ / 2)
+	    || !data->valid) {
+
+		for (i = 0; i <= data->maxins; i++) {
+			data->in[i] =
+			    sis5595_read_value(client, SIS5595_REG_IN(i));
+			data->in_min[i] =
+			    sis5595_read_value(client,
+					       SIS5595_REG_IN_MIN(i));
+			data->in_max[i] =
+			    sis5595_read_value(client,
+					       SIS5595_REG_IN_MAX(i));
+		}
+		for (i = 0; i < 2; i++) {
+			data->fan[i] =
+			    sis5595_read_value(client, SIS5595_REG_FAN(i));
+			data->fan_min[i] =
+			    sis5595_read_value(client,
+					       SIS5595_REG_FAN_MIN(i));
+		}
+		if (data->maxins == 3) {
+			data->temp =
+			    sis5595_read_value(client, SIS5595_REG_TEMP);
+			data->temp_over =
+			    sis5595_read_value(client, SIS5595_REG_TEMP_OVER);
+			data->temp_hyst =
+			    sis5595_read_value(client, SIS5595_REG_TEMP_HYST);
+		}
+		i = sis5595_read_value(client, SIS5595_REG_FANDIV);
+		data->fan_div[0] = (i >> 4) & 0x03;
+		data->fan_div[1] = i >> 6;
+		data->alarms =
+		    sis5595_read_value(client, SIS5595_REG_ALARM1) |
+		    (sis5595_read_value(client, SIS5595_REG_ALARM2) << 8);
+		data->last_updated = jiffies;
+		data->valid = 1;
+	}
+
+	up(&data->update_lock);
+
+	return data;
+}
+
+static struct pci_device_id sis5595_pci_ids[] = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_503) },
+	{ 0, }
+};
+
+MODULE_DEVICE_TABLE(pci, sis5595_pci_ids);
+
+static int blacklist[] __devinitdata = {
+	PCI_DEVICE_ID_SI_540,
+	PCI_DEVICE_ID_SI_550,
+	PCI_DEVICE_ID_SI_630,
+	PCI_DEVICE_ID_SI_645,
+	PCI_DEVICE_ID_SI_730,
+	PCI_DEVICE_ID_SI_735,
+	PCI_DEVICE_ID_SI_5511, /* 5513 chip has the 0008 device but
+				  that ID shows up in other chips so we
+				  use the 5511 ID for recognition */
+	PCI_DEVICE_ID_SI_5597,
+	PCI_DEVICE_ID_SI_5598,
+	0 };
+
+static int __devinit sis5595_pci_probe(struct pci_dev *dev,
+				       const struct pci_device_id *id)
+{
+	u16 val;
+	int *i;
+	int addr = 0;
+
+	for (i = blacklist; *i != 0; i++) {
+		struct pci_dev *dev;
+		dev = pci_get_device(PCI_VENDOR_ID_SI, *i, NULL);
+		if (dev) {
+			dev_err(&dev->dev, "Looked for SIS5595 but found unsupported device %.4x\n", *i);
+			pci_dev_put(dev);
+			return -ENODEV;
+		}
+	}
+	
+	if (PCIBIOS_SUCCESSFUL !=
+	    pci_read_config_word(dev, SIS5595_BASE_REG, &val))
+		return -ENODEV;
+	
+	addr = val & ~(SIS5595_EXTENT - 1);
+	if (addr == 0 && force_addr == 0) {
+		dev_err(&dev->dev, "Base address not set - upgrade BIOS or use force_addr=0xaddr\n");
+		return -ENODEV;
+	}
+	if (force_addr)
+		addr = force_addr;	/* so detect will get called */
+
+	if (!addr) {
+		dev_err(&dev->dev,"No SiS 5595 sensors found.\n");
+		return -ENODEV;
+	}
+	normal_isa[0] = addr;
+
+	s_bridge = pci_dev_get(dev);
+	if (i2c_add_driver(&sis5595_driver)) {
+		pci_dev_put(s_bridge);
+		s_bridge = NULL;
+	}
+
+	/* Always return failure here.  This is to allow other drivers to bind
+	 * to this pci device.  We don't really want to have control over the
+	 * pci device, we only wanted to read as few register values from it.
+	 */
+	return -ENODEV;
+}
+
+static struct pci_driver sis5595_pci_driver = {
+	.name            = "sis5595",
+	.id_table        = sis5595_pci_ids,
+	.probe           = sis5595_pci_probe,
+};
+
+static int __init sm_sis5595_init(void)
+{
+	return pci_register_driver(&sis5595_pci_driver);
+}
+
+static void __exit sm_sis5595_exit(void)
+{
+	pci_unregister_driver(&sis5595_pci_driver);
+	if (s_bridge != NULL) {
+		i2c_del_driver(&sis5595_driver);
+		pci_dev_put(s_bridge);
+		s_bridge = NULL;
+	}
+}
+
+MODULE_AUTHOR("Aurelien Jarno <aurelien@aurel32.net>");
+MODULE_DESCRIPTION("SiS 5595 Sensor device");
+MODULE_LICENSE("GPL");
+
+module_init(sm_sis5595_init);
+module_exit(sm_sis5595_exit);
diff --git a/drivers/i2c/chips/smsc47b397.c b/drivers/i2c/chips/smsc47b397.c
new file mode 100644
index 00000000000..1119c76791d
--- /dev/null
+++ b/drivers/i2c/chips/smsc47b397.c
@@ -0,0 +1,352 @@
+/*
+    smsc47b397.c - Part of lm_sensors, Linux kernel modules
+			for hardware monitoring
+
+    Supports the SMSC LPC47B397-NC Super-I/O chip.
+
+    Author/Maintainer: Mark M. Hoffman <mhoffman@lightlink.com>
+	Copyright (C) 2004 Utilitek Systems, Inc.
+
+    derived in part from smsc47m1.c:
+	Copyright (C) 2002 Mark D. Studebaker <mdsxyz123@yahoo.com>
+	Copyright (C) 2004 Jean Delvare <khali@linux-fr.org>
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/ioport.h>
+#include <linux/jiffies.h>
+#include <linux/i2c.h>
+#include <linux/i2c-sensor.h>
+#include <linux/init.h>
+#include <asm/io.h>
+
+static unsigned short normal_i2c[] = { I2C_CLIENT_END };
+/* Address is autodetected, there is no default value */
+static unsigned int normal_isa[] = { 0x0000, I2C_CLIENT_ISA_END };
+static struct i2c_force_data forces[] = {{NULL}};
+
+enum chips { any_chip, smsc47b397 };
+static struct i2c_address_data addr_data = {
+	.normal_i2c		= normal_i2c,
+	.normal_isa		= normal_isa,
+	.probe			= normal_i2c,		/* cheat */
+	.ignore			= normal_i2c,		/* cheat */
+	.forces			= forces,
+};
+
+/* Super-I/0 registers and commands */
+
+#define	REG	0x2e	/* The register to read/write */
+#define	VAL	0x2f	/* The value to read/write */
+
+static inline void superio_outb(int reg, int val)
+{
+	outb(reg, REG);
+	outb(val, VAL);
+}
+
+static inline int superio_inb(int reg)
+{
+	outb(reg, REG);
+	return inb(VAL);
+}
+
+/* select superio logical device */
+static inline void superio_select(int ld)
+{
+	superio_outb(0x07, ld);
+}
+
+static inline void superio_enter(void)
+{
+	outb(0x55, REG);
+}
+
+static inline void superio_exit(void)
+{
+	outb(0xAA, REG);
+}
+
+#define SUPERIO_REG_DEVID	0x20
+#define SUPERIO_REG_DEVREV	0x21
+#define SUPERIO_REG_BASE_MSB	0x60
+#define SUPERIO_REG_BASE_LSB	0x61
+#define SUPERIO_REG_LD8		0x08
+
+#define SMSC_EXTENT		0x02
+
+/* 0 <= nr <= 3 */
+static u8 smsc47b397_reg_temp[] = {0x25, 0x26, 0x27, 0x80};
+#define SMSC47B397_REG_TEMP(nr)	(smsc47b397_reg_temp[(nr)])
+
+/* 0 <= nr <= 3 */
+#define SMSC47B397_REG_FAN_LSB(nr) (0x28 + 2 * (nr))
+#define SMSC47B397_REG_FAN_MSB(nr) (0x29 + 2 * (nr))
+
+struct smsc47b397_data {
+	struct i2c_client client;
+	struct semaphore lock;
+
+	struct semaphore update_lock;
+	unsigned long last_updated; /* in jiffies */
+	int valid;
+
+	/* register values */
+	u16 fan[4];
+	u8 temp[4];
+};
+
+static int smsc47b397_read_value(struct i2c_client *client, u8 reg)
+{
+	struct smsc47b397_data *data = i2c_get_clientdata(client);
+	int res;
+
+	down(&data->lock);
+	outb(reg, client->addr);
+	res = inb_p(client->addr + 1);
+	up(&data->lock);
+	return res;
+}
+
+static struct smsc47b397_data *smsc47b397_update_device(struct device *dev)
+{
+ 	struct i2c_client *client = to_i2c_client(dev);
+	struct smsc47b397_data *data = i2c_get_clientdata(client);
+	int i;
+
+	down(&data->update_lock);
+
+	if (time_after(jiffies, data->last_updated + HZ) || !data->valid) {
+		dev_dbg(&client->dev, "starting device update...\n");
+
+		/* 4 temperature inputs, 4 fan inputs */
+		for (i = 0; i < 4; i++) {
+			data->temp[i] = smsc47b397_read_value(client,
+					SMSC47B397_REG_TEMP(i));
+
+			/* must read LSB first */
+			data->fan[i]  = smsc47b397_read_value(client,
+					SMSC47B397_REG_FAN_LSB(i));
+			data->fan[i] |= smsc47b397_read_value(client,
+					SMSC47B397_REG_FAN_MSB(i)) << 8;
+		}
+
+		data->last_updated = jiffies;
+		data->valid = 1;
+
+		dev_dbg(&client->dev, "... device update complete\n");
+	}
+
+	up(&data->update_lock);
+
+	return data;
+}
+
+/* TEMP: 0.001C/bit (-128C to +127C)
+   REG: 1C/bit, two's complement */
+static int temp_from_reg(u8 reg)
+{
+	return (s8)reg * 1000;
+}
+
+/* 0 <= nr <= 3 */
+static ssize_t show_temp(struct device *dev, char *buf, int nr)
+{
+	struct smsc47b397_data *data = smsc47b397_update_device(dev);
+	return sprintf(buf, "%d\n", temp_from_reg(data->temp[nr]));
+}
+
+#define sysfs_temp(num) \
+static ssize_t show_temp##num(struct device *dev, char *buf) \
+{ \
+	return show_temp(dev, buf, num-1); \
+} \
+static DEVICE_ATTR(temp##num##_input, S_IRUGO, show_temp##num, NULL)
+
+sysfs_temp(1);
+sysfs_temp(2);
+sysfs_temp(3);
+sysfs_temp(4);
+
+#define device_create_file_temp(client, num) \
+	device_create_file(&client->dev, &dev_attr_temp##num##_input)
+
+/* FAN: 1 RPM/bit
+   REG: count of 90kHz pulses / revolution */
+static int fan_from_reg(u16 reg)
+{
+	return 90000 * 60 / reg;
+}
+
+/* 0 <= nr <= 3 */
+static ssize_t show_fan(struct device *dev, char *buf, int nr)
+{
+        struct smsc47b397_data *data = smsc47b397_update_device(dev);
+        return sprintf(buf, "%d\n", fan_from_reg(data->fan[nr]));
+}
+
+#define sysfs_fan(num) \
+static ssize_t show_fan##num(struct device *dev, char *buf) \
+{ \
+	return show_fan(dev, buf, num-1); \
+} \
+static DEVICE_ATTR(fan##num##_input, S_IRUGO, show_fan##num, NULL)
+
+sysfs_fan(1);
+sysfs_fan(2);
+sysfs_fan(3);
+sysfs_fan(4);
+
+#define device_create_file_fan(client, num) \
+	device_create_file(&client->dev, &dev_attr_fan##num##_input)
+
+static int smsc47b397_detect(struct i2c_adapter *adapter, int addr, int kind);
+
+static int smsc47b397_attach_adapter(struct i2c_adapter *adapter)
+{
+	if (!(adapter->class & I2C_CLASS_HWMON))
+		return 0;
+	return i2c_detect(adapter, &addr_data, smsc47b397_detect);
+}
+
+static int smsc47b397_detach_client(struct i2c_client *client)
+{
+	int err;
+
+	if ((err = i2c_detach_client(client))) {
+		dev_err(&client->dev, "Client deregistration failed, "
+			"client not detached.\n");
+		return err;
+	}
+
+	release_region(client->addr, SMSC_EXTENT);
+	kfree(i2c_get_clientdata(client));
+
+	return 0;
+}
+
+static struct i2c_driver smsc47b397_driver = {
+	.owner		= THIS_MODULE,
+	.name		= "smsc47b397",
+	.id		= I2C_DRIVERID_SMSC47B397,
+	.flags		= I2C_DF_NOTIFY,
+	.attach_adapter	= smsc47b397_attach_adapter,
+	.detach_client	= smsc47b397_detach_client,
+};
+
+static int smsc47b397_detect(struct i2c_adapter *adapter, int addr, int kind)
+{
+	struct i2c_client *new_client;
+	struct smsc47b397_data *data;
+	int err = 0;
+
+	if (!i2c_is_isa_adapter(adapter)) {
+		return 0;
+	}
+
+	if (!request_region(addr, SMSC_EXTENT, smsc47b397_driver.name)) {
+		dev_err(&adapter->dev, "Region 0x%x already in use!\n", addr);
+		return -EBUSY;
+	}
+
+	if (!(data = kmalloc(sizeof(struct smsc47b397_data), GFP_KERNEL))) {
+		err = -ENOMEM;
+		goto error_release;
+	}
+	memset(data, 0x00, sizeof(struct smsc47b397_data));
+
+	new_client = &data->client;
+	i2c_set_clientdata(new_client, data);
+	new_client->addr = addr;
+	init_MUTEX(&data->lock);
+	new_client->adapter = adapter;
+	new_client->driver = &smsc47b397_driver;
+	new_client->flags = 0;
+
+	strlcpy(new_client->name, "smsc47b397", I2C_NAME_SIZE);
+
+	init_MUTEX(&data->update_lock);
+
+	if ((err = i2c_attach_client(new_client)))
+		goto error_free;
+
+	device_create_file_temp(new_client, 1);
+	device_create_file_temp(new_client, 2);
+	device_create_file_temp(new_client, 3);
+	device_create_file_temp(new_client, 4);
+
+	device_create_file_fan(new_client, 1);
+	device_create_file_fan(new_client, 2);
+	device_create_file_fan(new_client, 3);
+	device_create_file_fan(new_client, 4);
+
+	return 0;
+
+error_free:
+	kfree(new_client);
+error_release:
+	release_region(addr, SMSC_EXTENT);
+	return err;
+}
+
+static int __init smsc47b397_find(unsigned int *addr)
+{
+	u8 id, rev;
+
+	superio_enter();
+	id = superio_inb(SUPERIO_REG_DEVID);
+
+	if (id != 0x6f) {
+		superio_exit();
+		return -ENODEV;
+	}
+
+	rev = superio_inb(SUPERIO_REG_DEVREV);
+
+	superio_select(SUPERIO_REG_LD8);
+	*addr = (superio_inb(SUPERIO_REG_BASE_MSB) << 8)
+		 |  superio_inb(SUPERIO_REG_BASE_LSB);
+
+	printk(KERN_INFO "smsc47b397: found SMSC LPC47B397-NC "
+		"(base address 0x%04x, revision %u)\n", *addr, rev);
+
+	superio_exit();
+	return 0;
+}
+
+static int __init smsc47b397_init(void)
+{
+	int ret;
+
+	if ((ret = smsc47b397_find(normal_isa)))
+		return ret;
+
+	return i2c_add_driver(&smsc47b397_driver);
+}
+
+static void __exit smsc47b397_exit(void)
+{
+	i2c_del_driver(&smsc47b397_driver);
+}
+
+MODULE_AUTHOR("Mark M. Hoffman <mhoffman@lightlink.com>");
+MODULE_DESCRIPTION("SMSC LPC47B397 driver");
+MODULE_LICENSE("GPL");
+
+module_init(smsc47b397_init);
+module_exit(smsc47b397_exit);
diff --git a/drivers/i2c/chips/smsc47m1.c b/drivers/i2c/chips/smsc47m1.c
new file mode 100644
index 00000000000..0e12ca36941
--- /dev/null
+++ b/drivers/i2c/chips/smsc47m1.c
@@ -0,0 +1,591 @@
+/*
+    smsc47m1.c - Part of lm_sensors, Linux kernel modules
+                 for hardware monitoring
+
+    Supports the SMSC LPC47B27x, LPC47M10x, LPC47M13x and LPC47M14x
+    Super-I/O chips.
+
+    Copyright (C) 2002 Mark D. Studebaker <mdsxyz123@yahoo.com>
+    Copyright (C) 2004 Jean Delvare <khali@linux-fr.org>
+    Ported to Linux 2.6 by Gabriele Gorla <gorlik@yahoo.com>
+                        and Jean Delvare
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/ioport.h>
+#include <linux/jiffies.h>
+#include <linux/i2c.h>
+#include <linux/i2c-sensor.h>
+#include <linux/init.h>
+#include <asm/io.h>
+
+static unsigned short normal_i2c[] = { I2C_CLIENT_END };
+/* Address is autodetected, there is no default value */
+static unsigned int normal_isa[] = { 0x0000, I2C_CLIENT_ISA_END };
+static struct i2c_force_data forces[] = {{NULL}};
+
+enum chips { any_chip, smsc47m1 };
+static struct i2c_address_data addr_data = {
+	.normal_i2c		= normal_i2c,
+	.normal_isa		= normal_isa,
+	.forces			= forces,
+};
+
+/* Super-I/0 registers and commands */
+
+#define	REG	0x2e	/* The register to read/write */
+#define	VAL	0x2f	/* The value to read/write */
+
+static inline void
+superio_outb(int reg, int val)
+{
+	outb(reg, REG);
+	outb(val, VAL);
+}
+
+static inline int
+superio_inb(int reg)
+{
+	outb(reg, REG);
+	return inb(VAL);
+}
+
+/* logical device for fans is 0x0A */
+#define superio_select() superio_outb(0x07, 0x0A)
+
+static inline void
+superio_enter(void)
+{
+	outb(0x55, REG);
+}
+
+static inline void
+superio_exit(void)
+{
+	outb(0xAA, REG);
+}
+
+#define SUPERIO_REG_ACT		0x30
+#define SUPERIO_REG_BASE	0x60
+#define SUPERIO_REG_DEVID	0x20
+
+/* Logical device registers */
+
+#define SMSC_EXTENT		0x80
+
+/* nr is 0 or 1 in the macros below */
+#define SMSC47M1_REG_ALARM		0x04
+#define SMSC47M1_REG_TPIN(nr)		(0x34 - (nr))
+#define SMSC47M1_REG_PPIN(nr)		(0x36 - (nr))
+#define SMSC47M1_REG_PWM(nr)		(0x56 + (nr))
+#define SMSC47M1_REG_FANDIV		0x58
+#define SMSC47M1_REG_FAN(nr)		(0x59 + (nr))
+#define SMSC47M1_REG_FAN_PRELOAD(nr)	(0x5B + (nr))
+
+#define MIN_FROM_REG(reg,div)		((reg)>=192 ? 0 : \
+					 983040/((192-(reg))*(div)))
+#define FAN_FROM_REG(reg,div,preload)	((reg)<=(preload) || (reg)==255 ? 0 : \
+					 983040/(((reg)-(preload))*(div)))
+#define DIV_FROM_REG(reg)		(1 << (reg))
+#define PWM_FROM_REG(reg)		(((reg) & 0x7E) << 1)
+#define PWM_EN_FROM_REG(reg)		((~(reg)) & 0x01)
+#define PWM_TO_REG(reg)			(((reg) >> 1) & 0x7E)
+
+struct smsc47m1_data {
+	struct i2c_client client;
+	struct semaphore lock;
+
+	struct semaphore update_lock;
+	unsigned long last_updated;	/* In jiffies */
+
+	u8 fan[2];		/* Register value */
+	u8 fan_preload[2];	/* Register value */
+	u8 fan_div[2];		/* Register encoding, shifted right */
+	u8 alarms;		/* Register encoding */
+	u8 pwm[2];		/* Register value (bit 7 is enable) */
+};
+
+
+static int smsc47m1_attach_adapter(struct i2c_adapter *adapter);
+static int smsc47m1_find(int *address);
+static int smsc47m1_detect(struct i2c_adapter *adapter, int address, int kind);
+static int smsc47m1_detach_client(struct i2c_client *client);
+
+static int smsc47m1_read_value(struct i2c_client *client, u8 reg);
+static void smsc47m1_write_value(struct i2c_client *client, u8 reg, u8 value);
+
+static struct smsc47m1_data *smsc47m1_update_device(struct device *dev,
+		int init);
+
+
+static struct i2c_driver smsc47m1_driver = {
+	.owner		= THIS_MODULE,
+	.name		= "smsc47m1",
+	.id		= I2C_DRIVERID_SMSC47M1,
+	.flags		= I2C_DF_NOTIFY,
+	.attach_adapter	= smsc47m1_attach_adapter,
+	.detach_client	= smsc47m1_detach_client,
+};
+
+/* nr is 0 or 1 in the callback functions below */
+
+static ssize_t get_fan(struct device *dev, char *buf, int nr)
+{
+	struct smsc47m1_data *data = smsc47m1_update_device(dev, 0);
+	/* This chip (stupidly) stops monitoring fan speed if PWM is
+	   enabled and duty cycle is 0%. This is fine if the monitoring
+	   and control concern the same fan, but troublesome if they are
+	   not (which could as well happen). */
+	int rpm = (data->pwm[nr] & 0x7F) == 0x00 ? 0 :
+		  FAN_FROM_REG(data->fan[nr],
+			       DIV_FROM_REG(data->fan_div[nr]),
+			       data->fan_preload[nr]);
+	return sprintf(buf, "%d\n", rpm);
+}
+
+static ssize_t get_fan_min(struct device *dev, char *buf, int nr)
+{
+	struct smsc47m1_data *data = smsc47m1_update_device(dev, 0);
+	int rpm = MIN_FROM_REG(data->fan_preload[nr],
+			       DIV_FROM_REG(data->fan_div[nr]));
+	return sprintf(buf, "%d\n", rpm);
+}
+
+static ssize_t get_fan_div(struct device *dev, char *buf, int nr)
+{
+	struct smsc47m1_data *data = smsc47m1_update_device(dev, 0);
+	return sprintf(buf, "%d\n", DIV_FROM_REG(data->fan_div[nr]));
+}
+
+static ssize_t get_pwm(struct device *dev, char *buf, int nr)
+{
+	struct smsc47m1_data *data = smsc47m1_update_device(dev, 0);
+	return sprintf(buf, "%d\n", PWM_FROM_REG(data->pwm[nr]));
+}
+
+static ssize_t get_pwm_en(struct device *dev, char *buf, int nr)
+{
+	struct smsc47m1_data *data = smsc47m1_update_device(dev, 0);
+	return sprintf(buf, "%d\n", PWM_EN_FROM_REG(data->pwm[nr]));
+}
+
+static ssize_t get_alarms(struct device *dev, char *buf)
+{
+	struct smsc47m1_data *data = smsc47m1_update_device(dev, 0);
+	return sprintf(buf, "%d\n", data->alarms);
+}
+
+static ssize_t set_fan_min(struct device *dev, const char *buf,
+		size_t count, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct smsc47m1_data *data = i2c_get_clientdata(client);
+	long rpmdiv, val = simple_strtol(buf, NULL, 10);
+
+	down(&data->update_lock);
+	rpmdiv = val * DIV_FROM_REG(data->fan_div[nr]);
+
+	if (983040 > 192 * rpmdiv || 2 * rpmdiv > 983040) {
+		up(&data->update_lock);
+		return -EINVAL;
+	}
+
+	data->fan_preload[nr] = 192 - ((983040 + rpmdiv / 2) / rpmdiv);
+	smsc47m1_write_value(client, SMSC47M1_REG_FAN_PRELOAD(nr),
+			     data->fan_preload[nr]);
+	up(&data->update_lock);
+
+	return count;
+}
+
+/* Note: we save and restore the fan minimum here, because its value is
+   determined in part by the fan clock divider.  This follows the principle
+   of least suprise; the user doesn't expect the fan minimum to change just
+   because the divider changed. */
+static ssize_t set_fan_div(struct device *dev, const char *buf,
+		size_t count, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct smsc47m1_data *data = i2c_get_clientdata(client);
+
+	long new_div = simple_strtol(buf, NULL, 10), tmp;
+	u8 old_div = DIV_FROM_REG(data->fan_div[nr]);
+
+	if (new_div == old_div) /* No change */
+		return count;
+
+	down(&data->update_lock);
+	switch (new_div) {
+	case 1: data->fan_div[nr] = 0; break;
+	case 2: data->fan_div[nr] = 1; break;
+	case 4: data->fan_div[nr] = 2; break;
+	case 8: data->fan_div[nr] = 3; break;
+	default:
+		up(&data->update_lock);
+		return -EINVAL;
+	}
+
+	tmp = smsc47m1_read_value(client, SMSC47M1_REG_FANDIV) & 0x0F;
+	tmp |= (data->fan_div[0] << 4) | (data->fan_div[1] << 6);
+	smsc47m1_write_value(client, SMSC47M1_REG_FANDIV, tmp);
+
+	/* Preserve fan min */
+	tmp = 192 - (old_div * (192 - data->fan_preload[nr])
+		     + new_div / 2) / new_div;
+	data->fan_preload[nr] = SENSORS_LIMIT(tmp, 0, 191);
+	smsc47m1_write_value(client, SMSC47M1_REG_FAN_PRELOAD(nr),
+			     data->fan_preload[nr]);
+	up(&data->update_lock);
+
+	return count;
+}
+
+static ssize_t set_pwm(struct device *dev, const char *buf,
+		size_t count, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct smsc47m1_data *data = i2c_get_clientdata(client);
+
+	long val = simple_strtol(buf, NULL, 10);
+
+	if (val < 0 || val > 255)
+		return -EINVAL;
+
+	down(&data->update_lock);
+	data->pwm[nr] &= 0x81; /* Preserve additional bits */
+	data->pwm[nr] |= PWM_TO_REG(val);
+	smsc47m1_write_value(client, SMSC47M1_REG_PWM(nr),
+			     data->pwm[nr]);
+	up(&data->update_lock);
+
+	return count;
+}
+
+static ssize_t set_pwm_en(struct device *dev, const char *buf,
+		size_t count, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct smsc47m1_data *data = i2c_get_clientdata(client);
+
+	long val = simple_strtol(buf, NULL, 10);
+	
+	if (val != 0 && val != 1)
+		return -EINVAL;
+
+	down(&data->update_lock);
+	data->pwm[nr] &= 0xFE; /* preserve the other bits */
+	data->pwm[nr] |= !val;
+	smsc47m1_write_value(client, SMSC47M1_REG_PWM(nr),
+			     data->pwm[nr]);
+	up(&data->update_lock);
+
+	return count;
+}
+
+#define fan_present(offset)						\
+static ssize_t get_fan##offset (struct device *dev, char *buf)		\
+{									\
+	return get_fan(dev, buf, offset - 1);				\
+}									\
+static ssize_t get_fan##offset##_min (struct device *dev, char *buf)	\
+{									\
+	return get_fan_min(dev, buf, offset - 1);			\
+}									\
+static ssize_t set_fan##offset##_min (struct device *dev,		\
+		const char *buf, size_t count)				\
+{									\
+	return set_fan_min(dev, buf, count, offset - 1);		\
+}									\
+static ssize_t get_fan##offset##_div (struct device *dev, char *buf)	\
+{									\
+	return get_fan_div(dev, buf, offset - 1);			\
+}									\
+static ssize_t set_fan##offset##_div (struct device *dev,		\
+		const char *buf, size_t count)				\
+{									\
+	return set_fan_div(dev, buf, count, offset - 1);		\
+}									\
+static ssize_t get_pwm##offset (struct device *dev, char *buf)		\
+{									\
+	return get_pwm(dev, buf, offset - 1);				\
+}									\
+static ssize_t set_pwm##offset (struct device *dev,			\
+		const char *buf, size_t count)				\
+{									\
+	return set_pwm(dev, buf, count, offset - 1);			\
+}									\
+static ssize_t get_pwm##offset##_en (struct device *dev, char *buf)	\
+{									\
+	return get_pwm_en(dev, buf, offset - 1);			\
+}									\
+static ssize_t set_pwm##offset##_en (struct device *dev,		\
+		const char *buf, size_t count)				\
+{									\
+	return set_pwm_en(dev, buf, count, offset - 1);			\
+}									\
+static DEVICE_ATTR(fan##offset##_input, S_IRUGO, get_fan##offset,	\
+		NULL);							\
+static DEVICE_ATTR(fan##offset##_min, S_IRUGO | S_IWUSR,		\
+		get_fan##offset##_min, set_fan##offset##_min);		\
+static DEVICE_ATTR(fan##offset##_div, S_IRUGO | S_IWUSR,		\
+		get_fan##offset##_div, set_fan##offset##_div);		\
+static DEVICE_ATTR(pwm##offset, S_IRUGO | S_IWUSR,			\
+		get_pwm##offset, set_pwm##offset);			\
+static DEVICE_ATTR(pwm##offset##_enable, S_IRUGO | S_IWUSR,		\
+		get_pwm##offset##_en, set_pwm##offset##_en);
+
+fan_present(1);
+fan_present(2);
+
+static DEVICE_ATTR(alarms, S_IRUGO, get_alarms, NULL);
+
+static int smsc47m1_attach_adapter(struct i2c_adapter *adapter)
+{
+	if (!(adapter->class & I2C_CLASS_HWMON))
+		return 0;
+	return i2c_detect(adapter, &addr_data, smsc47m1_detect);
+}
+
+static int smsc47m1_find(int *address)
+{
+	u8 val;
+
+	superio_enter();
+	val = superio_inb(SUPERIO_REG_DEVID);
+
+	/*
+	 * SMSC LPC47M10x/LPC47M13x (device id 0x59), LPC47M14x (device id
+	 * 0x5F) and LPC47B27x (device id 0x51) have fan control.
+	 * The LPC47M15x and LPC47M192 chips "with hardware monitoring block"
+	 * can do much more besides (device id 0x60, unsupported).
+	 */
+	if (val == 0x51)
+		printk(KERN_INFO "smsc47m1: Found SMSC47B27x\n");
+	else if (val == 0x59)
+		printk(KERN_INFO "smsc47m1: Found SMSC47M10x/SMSC47M13x\n");
+	else if (val == 0x5F)
+		printk(KERN_INFO "smsc47m1: Found SMSC47M14x\n");
+	else {
+		superio_exit();
+		return -ENODEV;
+	}
+
+	superio_select();
+	*address = (superio_inb(SUPERIO_REG_BASE) << 8)
+		 |  superio_inb(SUPERIO_REG_BASE + 1);
+	val = superio_inb(SUPERIO_REG_ACT);
+	if (*address == 0 || (val & 0x01) == 0) {
+		printk(KERN_INFO "smsc47m1: Device is disabled, will not use\n");
+		superio_exit();
+		return -ENODEV;
+	}
+
+	superio_exit();
+	return 0;
+}
+
+static int smsc47m1_detect(struct i2c_adapter *adapter, int address, int kind)
+{
+	struct i2c_client *new_client;
+	struct smsc47m1_data *data;
+	int err = 0;
+	int fan1, fan2, pwm1, pwm2;
+
+	if (!i2c_is_isa_adapter(adapter)) {
+		return 0;
+	}
+
+	if (!request_region(address, SMSC_EXTENT, smsc47m1_driver.name)) {
+		dev_err(&adapter->dev, "Region 0x%x already in use!\n", address);
+		return -EBUSY;
+	}
+
+	if (!(data = kmalloc(sizeof(struct smsc47m1_data), GFP_KERNEL))) {
+		err = -ENOMEM;
+		goto error_release;
+	}
+	memset(data, 0x00, sizeof(struct smsc47m1_data));
+
+	new_client = &data->client;
+	i2c_set_clientdata(new_client, data);
+	new_client->addr = address;
+	init_MUTEX(&data->lock);
+	new_client->adapter = adapter;
+	new_client->driver = &smsc47m1_driver;
+	new_client->flags = 0;
+
+	strlcpy(new_client->name, "smsc47m1", I2C_NAME_SIZE);
+	init_MUTEX(&data->update_lock);
+
+	/* If no function is properly configured, there's no point in
+	   actually registering the chip. */
+	fan1 = (smsc47m1_read_value(new_client, SMSC47M1_REG_TPIN(0)) & 0x05)
+	       == 0x05;
+	fan2 = (smsc47m1_read_value(new_client, SMSC47M1_REG_TPIN(1)) & 0x05)
+	       == 0x05;
+	pwm1 = (smsc47m1_read_value(new_client, SMSC47M1_REG_PPIN(0)) & 0x05)
+	       == 0x04;
+	pwm2 = (smsc47m1_read_value(new_client, SMSC47M1_REG_PPIN(1)) & 0x05)
+	       == 0x04;
+	if (!(fan1 || fan2 || pwm1 || pwm2)) {
+		dev_warn(&new_client->dev, "Device is not configured, will not use\n");
+		err = -ENODEV;
+		goto error_free;
+	}
+
+	if ((err = i2c_attach_client(new_client)))
+		goto error_free;
+
+	/* Some values (fan min, clock dividers, pwm registers) may be
+	   needed before any update is triggered, so we better read them
+	   at least once here. We don't usually do it that way, but in
+	   this particular case, manually reading 5 registers out of 8
+	   doesn't make much sense and we're better using the existing
+	   function. */
+	smsc47m1_update_device(&new_client->dev, 1);
+
+	if (fan1) {
+		device_create_file(&new_client->dev, &dev_attr_fan1_input);
+		device_create_file(&new_client->dev, &dev_attr_fan1_min);
+		device_create_file(&new_client->dev, &dev_attr_fan1_div);
+	} else
+		dev_dbg(&new_client->dev, "Fan 1 not enabled by hardware, "
+			"skipping\n");
+
+	if (fan2) {
+		device_create_file(&new_client->dev, &dev_attr_fan2_input);
+		device_create_file(&new_client->dev, &dev_attr_fan2_min);
+		device_create_file(&new_client->dev, &dev_attr_fan2_div);
+	} else
+		dev_dbg(&new_client->dev, "Fan 2 not enabled by hardware, "
+			"skipping\n");
+
+	if (pwm1) {
+		device_create_file(&new_client->dev, &dev_attr_pwm1);
+		device_create_file(&new_client->dev, &dev_attr_pwm1_enable);
+	} else
+		dev_dbg(&new_client->dev, "PWM 1 not enabled by hardware, "
+			"skipping\n");
+	if (pwm2) {
+		device_create_file(&new_client->dev, &dev_attr_pwm2);
+		device_create_file(&new_client->dev, &dev_attr_pwm2_enable);
+	} else
+		dev_dbg(&new_client->dev, "PWM 2 not enabled by hardware, "
+			"skipping\n");
+
+	device_create_file(&new_client->dev, &dev_attr_alarms);
+
+	return 0;
+
+error_free:
+	kfree(new_client);
+error_release:
+	release_region(address, SMSC_EXTENT);
+	return err;
+}
+
+static int smsc47m1_detach_client(struct i2c_client *client)
+{
+	int err;
+
+	if ((err = i2c_detach_client(client))) {
+		dev_err(&client->dev, "Client deregistration failed, "
+			"client not detached.\n");
+		return err;
+	}
+
+	release_region(client->addr, SMSC_EXTENT);
+	kfree(i2c_get_clientdata(client));
+
+	return 0;
+}
+
+static int smsc47m1_read_value(struct i2c_client *client, u8 reg)
+{
+	int res;
+
+	down(&((struct smsc47m1_data *) i2c_get_clientdata(client))->lock);
+	res = inb_p(client->addr + reg);
+	up(&((struct smsc47m1_data *) i2c_get_clientdata(client))->lock);
+	return res;
+}
+
+static void smsc47m1_write_value(struct i2c_client *client, u8 reg, u8 value)
+{
+	down(&((struct smsc47m1_data *) i2c_get_clientdata(client))->lock);
+	outb_p(value, client->addr + reg);
+	up(&((struct smsc47m1_data *) i2c_get_clientdata(client))->lock);
+}
+
+static struct smsc47m1_data *smsc47m1_update_device(struct device *dev,
+		int init)
+{
+ 	struct i2c_client *client = to_i2c_client(dev);
+	struct smsc47m1_data *data = i2c_get_clientdata(client);
+
+	down(&data->update_lock);
+
+	if (time_after(jiffies, data->last_updated + HZ + HZ / 2) || init) {
+		int i;
+
+		for (i = 0; i < 2; i++) {
+			data->fan[i] = smsc47m1_read_value(client,
+				       SMSC47M1_REG_FAN(i));
+			data->fan_preload[i] = smsc47m1_read_value(client,
+					       SMSC47M1_REG_FAN_PRELOAD(i));
+			data->pwm[i] = smsc47m1_read_value(client,
+				       SMSC47M1_REG_PWM(i));
+		}
+
+		i = smsc47m1_read_value(client, SMSC47M1_REG_FANDIV);
+		data->fan_div[0] = (i >> 4) & 0x03;
+		data->fan_div[1] = i >> 6;
+
+		data->alarms = smsc47m1_read_value(client,
+			       SMSC47M1_REG_ALARM) >> 6;
+		/* Clear alarms if needed */
+		if (data->alarms)
+			smsc47m1_write_value(client, SMSC47M1_REG_ALARM, 0xC0);
+
+		data->last_updated = jiffies;
+	}
+
+	up(&data->update_lock);
+	return data;
+}
+
+static int __init sm_smsc47m1_init(void)
+{
+	if (smsc47m1_find(normal_isa)) {
+		return -ENODEV;
+	}
+
+	return i2c_add_driver(&smsc47m1_driver);
+}
+
+static void __exit sm_smsc47m1_exit(void)
+{
+	i2c_del_driver(&smsc47m1_driver);
+}
+
+MODULE_AUTHOR("Mark D. Studebaker <mdsxyz123@yahoo.com>");
+MODULE_DESCRIPTION("SMSC LPC47M1xx fan sensors driver");
+MODULE_LICENSE("GPL");
+
+module_init(sm_smsc47m1_init);
+module_exit(sm_smsc47m1_exit);
diff --git a/drivers/i2c/chips/via686a.c b/drivers/i2c/chips/via686a.c
new file mode 100644
index 00000000000..9b948f4531f
--- /dev/null
+++ b/drivers/i2c/chips/via686a.c
@@ -0,0 +1,879 @@
+/*
+    via686a.c - Part of lm_sensors, Linux kernel modules
+                for hardware monitoring
+                
+    Copyright (c) 1998 - 2002  Frodo Looijaard <frodol@dds.nl>,
+                        Kyösti Mälkki <kmalkki@cc.hut.fi>,
+			Mark Studebaker <mdsxyz123@yahoo.com>,
+			and Bob Dougherty <bobd@stanford.edu>
+    (Some conversion-factor data were contributed by Jonathan Teh Soon Yew 
+    <j.teh@iname.com> and Alex van Kaam <darkside@chello.nl>.)
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+/*
+    Supports the Via VT82C686A, VT82C686B south bridges.
+    Reports all as a 686A.
+    Warning - only supports a single device.
+*/
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/jiffies.h>
+#include <linux/i2c.h>
+#include <linux/i2c-sensor.h>
+#include <linux/init.h>
+#include <asm/io.h>
+
+
+/* If force_addr is set to anything different from 0, we forcibly enable
+   the device at the given address. */
+static unsigned short force_addr = 0;
+module_param(force_addr, ushort, 0);
+MODULE_PARM_DESC(force_addr,
+		 "Initialize the base address of the sensors");
+
+/* Addresses to scan.
+   Note that we can't determine the ISA address until we have initialized
+   our module */
+static unsigned short normal_i2c[] = { I2C_CLIENT_END };
+static unsigned int normal_isa[] = { 0x0000, I2C_CLIENT_ISA_END };
+
+/* Insmod parameters */
+SENSORS_INSMOD_1(via686a);
+
+/*
+   The Via 686a southbridge has a LM78-like chip integrated on the same IC.
+   This driver is a customized copy of lm78.c
+*/
+
+/* Many VIA686A constants specified below */
+
+/* Length of ISA address segment */
+#define VIA686A_EXTENT 0x80
+#define VIA686A_BASE_REG 0x70
+#define VIA686A_ENABLE_REG 0x74
+
+/* The VIA686A registers */
+/* ins numbered 0-4 */
+#define VIA686A_REG_IN_MAX(nr) (0x2b + ((nr) * 2))
+#define VIA686A_REG_IN_MIN(nr) (0x2c + ((nr) * 2))
+#define VIA686A_REG_IN(nr)     (0x22 + (nr))
+
+/* fans numbered 1-2 */
+#define VIA686A_REG_FAN_MIN(nr) (0x3a + (nr))
+#define VIA686A_REG_FAN(nr)     (0x28 + (nr))
+
+/* the following values are as speced by VIA: */
+static const u8 regtemp[] = { 0x20, 0x21, 0x1f };
+static const u8 regover[] = { 0x39, 0x3d, 0x1d };
+static const u8 reghyst[] = { 0x3a, 0x3e, 0x1e };
+
+/* temps numbered 1-3 */
+#define VIA686A_REG_TEMP(nr)		(regtemp[nr])
+#define VIA686A_REG_TEMP_OVER(nr)	(regover[nr])
+#define VIA686A_REG_TEMP_HYST(nr)	(reghyst[nr])
+#define VIA686A_REG_TEMP_LOW1	0x4b	// bits 7-6
+#define VIA686A_REG_TEMP_LOW23	0x49	// 2 = bits 5-4, 3 = bits 7-6
+
+#define VIA686A_REG_ALARM1 0x41
+#define VIA686A_REG_ALARM2 0x42
+#define VIA686A_REG_FANDIV 0x47
+#define VIA686A_REG_CONFIG 0x40
+/* The following register sets temp interrupt mode (bits 1-0 for temp1, 
+ 3-2 for temp2, 5-4 for temp3).  Modes are:
+    00 interrupt stays as long as value is out-of-range
+    01 interrupt is cleared once register is read (default)
+    10 comparator mode- like 00, but ignores hysteresis
+    11 same as 00 */
+#define VIA686A_REG_TEMP_MODE 0x4b
+/* We'll just assume that you want to set all 3 simultaneously: */
+#define VIA686A_TEMP_MODE_MASK 0x3F
+#define VIA686A_TEMP_MODE_CONTINUOUS (0x00)
+
+/* Conversions. Limit checking is only done on the TO_REG
+   variants. 
+
+********* VOLTAGE CONVERSIONS (Bob Dougherty) ********
+ From HWMon.cpp (Copyright 1998-2000 Jonathan Teh Soon Yew):
+ voltagefactor[0]=1.25/2628; (2628/1.25=2102.4)   // Vccp
+ voltagefactor[1]=1.25/2628; (2628/1.25=2102.4)   // +2.5V
+ voltagefactor[2]=1.67/2628; (2628/1.67=1573.7)   // +3.3V
+ voltagefactor[3]=2.6/2628;  (2628/2.60=1010.8)   // +5V
+ voltagefactor[4]=6.3/2628;  (2628/6.30=417.14)   // +12V
+ in[i]=(data[i+2]*25.0+133)*voltagefactor[i];
+ That is:
+ volts = (25*regVal+133)*factor
+ regVal = (volts/factor-133)/25
+ (These conversions were contributed by Jonathan Teh Soon Yew 
+ <j.teh@iname.com>) */
+static inline u8 IN_TO_REG(long val, int inNum)
+{
+	/* To avoid floating point, we multiply constants by 10 (100 for +12V).
+	   Rounding is done (120500 is actually 133000 - 12500).
+	   Remember that val is expressed in 0.001V/bit, which is why we divide
+	   by an additional 10000 (100000 for +12V): 1000 for val and 10 (100)
+	   for the constants. */
+	if (inNum <= 1)
+		return (u8)
+		    SENSORS_LIMIT((val * 21024 - 1205000) / 250000, 0, 255);
+	else if (inNum == 2)
+		return (u8)
+		    SENSORS_LIMIT((val * 15737 - 1205000) / 250000, 0, 255);
+	else if (inNum == 3)
+		return (u8)
+		    SENSORS_LIMIT((val * 10108 - 1205000) / 250000, 0, 255);
+	else
+		return (u8)
+		    SENSORS_LIMIT((val * 41714 - 12050000) / 2500000, 0, 255);
+}
+
+static inline long IN_FROM_REG(u8 val, int inNum)
+{
+	/* To avoid floating point, we multiply constants by 10 (100 for +12V).
+	   We also multiply them by 1000 because we want 0.001V/bit for the
+	   output value. Rounding is done. */
+	if (inNum <= 1)
+		return (long) ((250000 * val + 1330000 + 21024 / 2) / 21024);
+	else if (inNum == 2)
+		return (long) ((250000 * val + 1330000 + 15737 / 2) / 15737);
+	else if (inNum == 3)
+		return (long) ((250000 * val + 1330000 + 10108 / 2) / 10108);
+	else
+		return (long) ((2500000 * val + 13300000 + 41714 / 2) / 41714);
+}
+
+/********* FAN RPM CONVERSIONS ********/
+/* Higher register values = slower fans (the fan's strobe gates a counter).
+ But this chip saturates back at 0, not at 255 like all the other chips.
+ So, 0 means 0 RPM */
+static inline u8 FAN_TO_REG(long rpm, int div)
+{
+	if (rpm == 0)
+		return 0;
+	rpm = SENSORS_LIMIT(rpm, 1, 1000000);
+	return SENSORS_LIMIT((1350000 + rpm * div / 2) / (rpm * div), 1, 255);
+}
+
+#define FAN_FROM_REG(val,div) ((val)==0?0:(val)==255?0:1350000/((val)*(div)))
+
+/******** TEMP CONVERSIONS (Bob Dougherty) *********/
+/* linear fits from HWMon.cpp (Copyright 1998-2000 Jonathan Teh Soon Yew)
+      if(temp<169)
+              return double(temp)*0.427-32.08;
+      else if(temp>=169 && temp<=202)
+              return double(temp)*0.582-58.16;
+      else
+              return double(temp)*0.924-127.33;
+
+ A fifth-order polynomial fits the unofficial data (provided by Alex van 
+ Kaam <darkside@chello.nl>) a bit better.  It also give more reasonable 
+ numbers on my machine (ie. they agree with what my BIOS tells me).  
+ Here's the fifth-order fit to the 8-bit data:
+ temp = 1.625093e-10*val^5 - 1.001632e-07*val^4 + 2.457653e-05*val^3 - 
+        2.967619e-03*val^2 + 2.175144e-01*val - 7.090067e+0.
+
+ (2000-10-25- RFD: thanks to Uwe Andersen <uandersen@mayah.com> for 
+ finding my typos in this formula!)
+
+ Alas, none of the elegant function-fit solutions will work because we 
+ aren't allowed to use floating point in the kernel and doing it with 
+ integers doesn't rpovide enough precision.  So we'll do boring old 
+ look-up table stuff.  The unofficial data (see below) have effectively 
+ 7-bit resolution (they are rounded to the nearest degree).  I'm assuming 
+ that the transfer function of the device is monotonic and smooth, so a 
+ smooth function fit to the data will allow us to get better precision.  
+ I used the 5th-order poly fit described above and solved for
+ VIA register values 0-255.  I *10 before rounding, so we get tenth-degree 
+ precision.  (I could have done all 1024 values for our 10-bit readings, 
+ but the function is very linear in the useful range (0-80 deg C), so 
+ we'll just use linear interpolation for 10-bit readings.)  So, tempLUT 
+ is the temp at via register values 0-255: */
+static const long tempLUT[] =
+    { -709, -688, -667, -646, -627, -607, -589, -570, -553, -536, -519,
+	    -503, -487, -471, -456, -442, -428, -414, -400, -387, -375,
+	    -362, -350, -339, -327, -316, -305, -295, -285, -275, -265,
+	    -255, -246, -237, -229, -220, -212, -204, -196, -188, -180,
+	    -173, -166, -159, -152, -145, -139, -132, -126, -120, -114,
+	    -108, -102, -96, -91, -85, -80, -74, -69, -64, -59, -54, -49,
+	    -44, -39, -34, -29, -25, -20, -15, -11, -6, -2, 3, 7, 12, 16,
+	    20, 25, 29, 33, 37, 42, 46, 50, 54, 59, 63, 67, 71, 75, 79, 84,
+	    88, 92, 96, 100, 104, 109, 113, 117, 121, 125, 130, 134, 138,
+	    142, 146, 151, 155, 159, 163, 168, 172, 176, 181, 185, 189,
+	    193, 198, 202, 206, 211, 215, 219, 224, 228, 232, 237, 241,
+	    245, 250, 254, 259, 263, 267, 272, 276, 281, 285, 290, 294,
+	    299, 303, 307, 312, 316, 321, 325, 330, 334, 339, 344, 348,
+	    353, 357, 362, 366, 371, 376, 380, 385, 390, 395, 399, 404,
+	    409, 414, 419, 423, 428, 433, 438, 443, 449, 454, 459, 464,
+	    469, 475, 480, 486, 491, 497, 502, 508, 514, 520, 526, 532,
+	    538, 544, 551, 557, 564, 571, 578, 584, 592, 599, 606, 614,
+	    621, 629, 637, 645, 654, 662, 671, 680, 689, 698, 708, 718,
+	    728, 738, 749, 759, 770, 782, 793, 805, 818, 830, 843, 856,
+	    870, 883, 898, 912, 927, 943, 958, 975, 991, 1008, 1026, 1044,
+	    1062, 1081, 1101, 1121, 1141, 1162, 1184, 1206, 1229, 1252,
+	    1276, 1301, 1326, 1352, 1378, 1406, 1434, 1462
+};
+
+/* the original LUT values from Alex van Kaam <darkside@chello.nl> 
+   (for via register values 12-240):
+{-50,-49,-47,-45,-43,-41,-39,-38,-37,-35,-34,-33,-32,-31,
+-30,-29,-28,-27,-26,-25,-24,-24,-23,-22,-21,-20,-20,-19,-18,-17,-17,-16,-15,
+-15,-14,-14,-13,-12,-12,-11,-11,-10,-9,-9,-8,-8,-7,-7,-6,-6,-5,-5,-4,-4,-3,
+-3,-2,-2,-1,-1,0,0,1,1,1,3,3,3,4,4,4,5,5,5,6,6,7,7,8,8,9,9,9,10,10,11,11,12,
+12,12,13,13,13,14,14,15,15,16,16,16,17,17,18,18,19,19,20,20,21,21,21,22,22,
+22,23,23,24,24,25,25,26,26,26,27,27,27,28,28,29,29,30,30,30,31,31,32,32,33,
+33,34,34,35,35,35,36,36,37,37,38,38,39,39,40,40,41,41,42,42,43,43,44,44,45,
+45,46,46,47,48,48,49,49,50,51,51,52,52,53,53,54,55,55,56,57,57,58,59,59,60,
+61,62,62,63,64,65,66,66,67,68,69,70,71,72,73,74,75,76,77,78,79,80,81,83,84,
+85,86,88,89,91,92,94,96,97,99,101,103,105,107,109,110};
+
+
+ Here's the reverse LUT.  I got it by doing a 6-th order poly fit (needed
+ an extra term for a good fit to these inverse data!) and then 
+ solving for each temp value from -50 to 110 (the useable range for 
+ this chip).  Here's the fit: 
+ viaRegVal = -1.160370e-10*val^6 +3.193693e-08*val^5 - 1.464447e-06*val^4 
+ - 2.525453e-04*val^3 + 1.424593e-02*val^2 + 2.148941e+00*val +7.275808e+01)
+ Note that n=161: */
+static const u8 viaLUT[] =
+    { 12, 12, 13, 14, 14, 15, 16, 16, 17, 18, 18, 19, 20, 20, 21, 22, 23,
+	    23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 35, 36, 37, 39, 40,
+	    41, 43, 45, 46, 48, 49, 51, 53, 55, 57, 59, 60, 62, 64, 66,
+	    69, 71, 73, 75, 77, 79, 82, 84, 86, 88, 91, 93, 95, 98, 100,
+	    103, 105, 107, 110, 112, 115, 117, 119, 122, 124, 126, 129,
+	    131, 134, 136, 138, 140, 143, 145, 147, 150, 152, 154, 156,
+	    158, 160, 162, 164, 166, 168, 170, 172, 174, 176, 178, 180,
+	    182, 183, 185, 187, 188, 190, 192, 193, 195, 196, 198, 199,
+	    200, 202, 203, 205, 206, 207, 208, 209, 210, 211, 212, 213,
+	    214, 215, 216, 217, 218, 219, 220, 221, 222, 222, 223, 224,
+	    225, 226, 226, 227, 228, 228, 229, 230, 230, 231, 232, 232,
+	    233, 233, 234, 235, 235, 236, 236, 237, 237, 238, 238, 239,
+	    239, 240
+};
+
+/* Converting temps to (8-bit) hyst and over registers
+   No interpolation here.
+   The +50 is because the temps start at -50 */
+static inline u8 TEMP_TO_REG(long val)
+{
+	return viaLUT[val <= -50000 ? 0 : val >= 110000 ? 160 : 
+		      (val < 0 ? val - 500 : val + 500) / 1000 + 50];
+}
+
+/* for 8-bit temperature hyst and over registers */
+#define TEMP_FROM_REG(val) (tempLUT[(val)] * 100)
+
+/* for 10-bit temperature readings */
+static inline long TEMP_FROM_REG10(u16 val)
+{
+	u16 eightBits = val >> 2;
+	u16 twoBits = val & 3;
+
+	/* no interpolation for these */
+	if (twoBits == 0 || eightBits == 255)
+		return TEMP_FROM_REG(eightBits);
+
+	/* do some linear interpolation */
+	return (tempLUT[eightBits] * (4 - twoBits) +
+	        tempLUT[eightBits + 1] * twoBits) * 25;
+}
+
+#define ALARMS_FROM_REG(val) (val)
+
+#define DIV_FROM_REG(val) (1 << (val))
+#define DIV_TO_REG(val) ((val)==8?3:(val)==4?2:(val)==1?0:1)
+
+/* For the VIA686A, we need to keep some data in memory.
+   The structure is dynamically allocated, at the same time when a new
+   via686a client is allocated. */
+struct via686a_data {
+	struct i2c_client client;
+	struct semaphore update_lock;
+	char valid;		/* !=0 if following fields are valid */
+	unsigned long last_updated;	/* In jiffies */
+
+	u8 in[5];		/* Register value */
+	u8 in_max[5];		/* Register value */
+	u8 in_min[5];		/* Register value */
+	u8 fan[2];		/* Register value */
+	u8 fan_min[2];		/* Register value */
+	u16 temp[3];		/* Register value 10 bit */
+	u8 temp_over[3];	/* Register value */
+	u8 temp_hyst[3];	/* Register value */
+	u8 fan_div[2];		/* Register encoding, shifted right */
+	u16 alarms;		/* Register encoding, combined */
+};
+
+static struct pci_dev *s_bridge;	/* pointer to the (only) via686a */
+
+static int via686a_attach_adapter(struct i2c_adapter *adapter);
+static int via686a_detect(struct i2c_adapter *adapter, int address, int kind);
+static int via686a_detach_client(struct i2c_client *client);
+
+static inline int via686a_read_value(struct i2c_client *client, u8 reg)
+{
+	return (inb_p(client->addr + reg));
+}
+
+static inline void via686a_write_value(struct i2c_client *client, u8 reg,
+				       u8 value)
+{
+	outb_p(value, client->addr + reg);
+}
+
+static struct via686a_data *via686a_update_device(struct device *dev);
+static void via686a_init_client(struct i2c_client *client);
+
+/* following are the sysfs callback functions */
+
+/* 7 voltage sensors */
+static ssize_t show_in(struct device *dev, char *buf, int nr) {
+	struct via686a_data *data = via686a_update_device(dev);
+	return sprintf(buf, "%ld\n", IN_FROM_REG(data->in[nr], nr));
+}
+
+static ssize_t show_in_min(struct device *dev, char *buf, int nr) {
+	struct via686a_data *data = via686a_update_device(dev);
+	return sprintf(buf, "%ld\n", IN_FROM_REG(data->in_min[nr], nr));
+}
+
+static ssize_t show_in_max(struct device *dev, char *buf, int nr) {
+	struct via686a_data *data = via686a_update_device(dev);
+	return sprintf(buf, "%ld\n", IN_FROM_REG(data->in_max[nr], nr));
+}
+
+static ssize_t set_in_min(struct device *dev, const char *buf, 
+		size_t count, int nr) {
+	struct i2c_client *client = to_i2c_client(dev);
+	struct via686a_data *data = i2c_get_clientdata(client);
+	unsigned long val = simple_strtoul(buf, NULL, 10);
+
+	down(&data->update_lock);
+	data->in_min[nr] = IN_TO_REG(val,nr);
+	via686a_write_value(client, VIA686A_REG_IN_MIN(nr), 
+			data->in_min[nr]);
+	up(&data->update_lock);
+	return count;
+}
+static ssize_t set_in_max(struct device *dev, const char *buf, 
+		size_t count, int nr) {
+	struct i2c_client *client = to_i2c_client(dev);
+	struct via686a_data *data = i2c_get_clientdata(client);
+	unsigned long val = simple_strtoul(buf, NULL, 10);
+
+	down(&data->update_lock);
+	data->in_max[nr] = IN_TO_REG(val,nr);
+	via686a_write_value(client, VIA686A_REG_IN_MAX(nr), 
+			data->in_max[nr]);
+	up(&data->update_lock);
+	return count;
+}
+#define show_in_offset(offset)					\
+static ssize_t 							\
+	show_in##offset (struct device *dev, char *buf)		\
+{								\
+	return show_in(dev, buf, offset);			\
+}								\
+static ssize_t 							\
+	show_in##offset##_min (struct device *dev, char *buf)	\
+{								\
+	return show_in_min(dev, buf, offset);		\
+}								\
+static ssize_t 							\
+	show_in##offset##_max (struct device *dev, char *buf)	\
+{								\
+	return show_in_max(dev, buf, offset);		\
+}								\
+static ssize_t set_in##offset##_min (struct device *dev, 	\
+		const char *buf, size_t count) 			\
+{								\
+	return set_in_min(dev, buf, count, offset);		\
+}								\
+static ssize_t set_in##offset##_max (struct device *dev,	\
+			const char *buf, size_t count)		\
+{								\
+	return set_in_max(dev, buf, count, offset);		\
+}								\
+static DEVICE_ATTR(in##offset##_input, S_IRUGO, show_in##offset, NULL);\
+static DEVICE_ATTR(in##offset##_min, S_IRUGO | S_IWUSR, 	\
+		show_in##offset##_min, set_in##offset##_min);	\
+static DEVICE_ATTR(in##offset##_max, S_IRUGO | S_IWUSR, 	\
+		show_in##offset##_max, set_in##offset##_max);
+
+show_in_offset(0);
+show_in_offset(1);
+show_in_offset(2);
+show_in_offset(3);
+show_in_offset(4);
+
+/* 3 temperatures */
+static ssize_t show_temp(struct device *dev, char *buf, int nr) {
+	struct via686a_data *data = via686a_update_device(dev);
+	return sprintf(buf, "%ld\n", TEMP_FROM_REG10(data->temp[nr]));
+}
+static ssize_t show_temp_over(struct device *dev, char *buf, int nr) {
+	struct via686a_data *data = via686a_update_device(dev);
+	return sprintf(buf, "%ld\n", TEMP_FROM_REG(data->temp_over[nr]));
+}
+static ssize_t show_temp_hyst(struct device *dev, char *buf, int nr) {
+	struct via686a_data *data = via686a_update_device(dev);
+	return sprintf(buf, "%ld\n", TEMP_FROM_REG(data->temp_hyst[nr]));
+}
+static ssize_t set_temp_over(struct device *dev, const char *buf, 
+		size_t count, int nr) {
+	struct i2c_client *client = to_i2c_client(dev);
+	struct via686a_data *data = i2c_get_clientdata(client);
+	int val = simple_strtol(buf, NULL, 10);
+
+	down(&data->update_lock);
+	data->temp_over[nr] = TEMP_TO_REG(val);
+	via686a_write_value(client, VIA686A_REG_TEMP_OVER(nr), data->temp_over[nr]);
+	up(&data->update_lock);
+	return count;
+}
+static ssize_t set_temp_hyst(struct device *dev, const char *buf, 
+		size_t count, int nr) {
+	struct i2c_client *client = to_i2c_client(dev);
+	struct via686a_data *data = i2c_get_clientdata(client);
+	int val = simple_strtol(buf, NULL, 10);
+
+	down(&data->update_lock);
+	data->temp_hyst[nr] = TEMP_TO_REG(val);
+	via686a_write_value(client, VIA686A_REG_TEMP_HYST(nr), data->temp_hyst[nr]);
+	up(&data->update_lock);
+	return count;
+}
+#define show_temp_offset(offset)					\
+static ssize_t show_temp_##offset (struct device *dev, char *buf)	\
+{									\
+	return show_temp(dev, buf, offset - 1);				\
+}									\
+static ssize_t								\
+show_temp_##offset##_over (struct device *dev, char *buf)		\
+{									\
+	return show_temp_over(dev, buf, offset - 1);			\
+}									\
+static ssize_t								\
+show_temp_##offset##_hyst (struct device *dev, char *buf)		\
+{									\
+	return show_temp_hyst(dev, buf, offset - 1);			\
+}									\
+static ssize_t set_temp_##offset##_over (struct device *dev, 		\
+		const char *buf, size_t count) 				\
+{									\
+	return set_temp_over(dev, buf, count, offset - 1);		\
+}									\
+static ssize_t set_temp_##offset##_hyst (struct device *dev, 		\
+		const char *buf, size_t count) 				\
+{									\
+	return set_temp_hyst(dev, buf, count, offset - 1);		\
+}									\
+static DEVICE_ATTR(temp##offset##_input, S_IRUGO, show_temp_##offset, NULL);\
+static DEVICE_ATTR(temp##offset##_max, S_IRUGO | S_IWUSR, 		\
+		show_temp_##offset##_over, set_temp_##offset##_over);	\
+static DEVICE_ATTR(temp##offset##_max_hyst, S_IRUGO | S_IWUSR, 		\
+		show_temp_##offset##_hyst, set_temp_##offset##_hyst);	
+
+show_temp_offset(1);
+show_temp_offset(2);
+show_temp_offset(3);
+
+/* 2 Fans */
+static ssize_t show_fan(struct device *dev, char *buf, int nr) {
+	struct via686a_data *data = via686a_update_device(dev);
+	return sprintf(buf,"%d\n", FAN_FROM_REG(data->fan[nr], 
+				DIV_FROM_REG(data->fan_div[nr])) );
+}
+static ssize_t show_fan_min(struct device *dev, char *buf, int nr) {
+	struct via686a_data *data = via686a_update_device(dev);
+	return sprintf(buf,"%d\n",
+		FAN_FROM_REG(data->fan_min[nr], DIV_FROM_REG(data->fan_div[nr])) );
+}
+static ssize_t show_fan_div(struct device *dev, char *buf, int nr) {
+	struct via686a_data *data = via686a_update_device(dev);
+	return sprintf(buf,"%d\n", DIV_FROM_REG(data->fan_div[nr]) );
+}
+static ssize_t set_fan_min(struct device *dev, const char *buf, 
+		size_t count, int nr) {
+	struct i2c_client *client = to_i2c_client(dev);
+	struct via686a_data *data = i2c_get_clientdata(client);
+	int val = simple_strtol(buf, NULL, 10);
+
+	down(&data->update_lock);
+	data->fan_min[nr] = FAN_TO_REG(val, DIV_FROM_REG(data->fan_div[nr]));
+	via686a_write_value(client, VIA686A_REG_FAN_MIN(nr+1), data->fan_min[nr]);
+	up(&data->update_lock);
+	return count;
+}
+static ssize_t set_fan_div(struct device *dev, const char *buf, 
+		size_t count, int nr) {
+	struct i2c_client *client = to_i2c_client(dev);
+	struct via686a_data *data = i2c_get_clientdata(client);
+	int val = simple_strtol(buf, NULL, 10);
+	int old;
+
+	down(&data->update_lock);
+	old = via686a_read_value(client, VIA686A_REG_FANDIV);
+	data->fan_div[nr] = DIV_TO_REG(val);
+	old = (old & 0x0f) | (data->fan_div[1] << 6) | (data->fan_div[0] << 4);
+	via686a_write_value(client, VIA686A_REG_FANDIV, old);
+	up(&data->update_lock);
+	return count;
+}
+
+#define show_fan_offset(offset)						\
+static ssize_t show_fan_##offset (struct device *dev, char *buf)	\
+{									\
+	return show_fan(dev, buf, offset - 1);				\
+}									\
+static ssize_t show_fan_##offset##_min (struct device *dev, char *buf)	\
+{									\
+	return show_fan_min(dev, buf, offset - 1);			\
+}									\
+static ssize_t show_fan_##offset##_div (struct device *dev, char *buf)	\
+{									\
+	return show_fan_div(dev, buf, offset - 1);			\
+}									\
+static ssize_t set_fan_##offset##_min (struct device *dev, 		\
+	const char *buf, size_t count) 					\
+{									\
+	return set_fan_min(dev, buf, count, offset - 1);		\
+}									\
+static ssize_t set_fan_##offset##_div (struct device *dev, 		\
+		const char *buf, size_t count) 				\
+{									\
+	return set_fan_div(dev, buf, count, offset - 1);		\
+}									\
+static DEVICE_ATTR(fan##offset##_input, S_IRUGO, show_fan_##offset, NULL);\
+static DEVICE_ATTR(fan##offset##_min, S_IRUGO | S_IWUSR, 		\
+		show_fan_##offset##_min, set_fan_##offset##_min);	\
+static DEVICE_ATTR(fan##offset##_div, S_IRUGO | S_IWUSR, 		\
+		show_fan_##offset##_div, set_fan_##offset##_div);
+
+show_fan_offset(1);
+show_fan_offset(2);
+
+/* Alarms */
+static ssize_t show_alarms(struct device *dev, char *buf) {
+	struct via686a_data *data = via686a_update_device(dev);
+	return sprintf(buf,"%d\n", ALARMS_FROM_REG(data->alarms));
+}
+static DEVICE_ATTR(alarms, S_IRUGO | S_IWUSR, show_alarms, NULL);
+
+/* The driver. I choose to use type i2c_driver, as at is identical to both
+   smbus_driver and isa_driver, and clients could be of either kind */
+static struct i2c_driver via686a_driver = {
+	.owner		= THIS_MODULE,
+	.name		= "via686a",
+	.id		= I2C_DRIVERID_VIA686A,
+	.flags		= I2C_DF_NOTIFY,
+	.attach_adapter	= via686a_attach_adapter,
+	.detach_client	= via686a_detach_client,
+};
+
+
+/* This is called when the module is loaded */
+static int via686a_attach_adapter(struct i2c_adapter *adapter)
+{
+	if (!(adapter->class & I2C_CLASS_HWMON))
+		return 0;
+	return i2c_detect(adapter, &addr_data, via686a_detect);
+}
+
+static int via686a_detect(struct i2c_adapter *adapter, int address, int kind)
+{
+	struct i2c_client *new_client;
+	struct via686a_data *data;
+	int err = 0;
+	const char client_name[] = "via686a";
+	u16 val;
+
+	/* Make sure we are probing the ISA bus!!  */
+	if (!i2c_is_isa_adapter(adapter)) {
+		dev_err(&adapter->dev,
+		"via686a_detect called for an I2C bus adapter?!?\n");
+		return 0;
+	}
+
+	/* 8231 requires multiple of 256, we enforce that on 686 as well */
+	if(force_addr)
+		address = force_addr & 0xFF00;
+
+	if(force_addr) {
+		dev_warn(&adapter->dev,"forcing ISA address 0x%04X\n", address);
+		if (PCIBIOS_SUCCESSFUL !=
+		    pci_write_config_word(s_bridge, VIA686A_BASE_REG, address))
+			return -ENODEV;
+	}
+	if (PCIBIOS_SUCCESSFUL !=
+	    pci_read_config_word(s_bridge, VIA686A_ENABLE_REG, &val))
+		return -ENODEV;
+	if (!(val & 0x0001)) {
+		dev_warn(&adapter->dev,"enabling sensors\n");
+		if (PCIBIOS_SUCCESSFUL !=
+		    pci_write_config_word(s_bridge, VIA686A_ENABLE_REG,
+		                      val | 0x0001))
+			return -ENODEV;
+	}
+
+	/* Reserve the ISA region */
+	if (!request_region(address, VIA686A_EXTENT, via686a_driver.name)) {
+		dev_err(&adapter->dev,"region 0x%x already in use!\n",
+		       address);
+		return -ENODEV;
+	}
+
+	if (!(data = kmalloc(sizeof(struct via686a_data), GFP_KERNEL))) {
+		err = -ENOMEM;
+		goto ERROR0;
+	}
+	memset(data, 0, sizeof(struct via686a_data));
+
+	new_client = &data->client;
+	i2c_set_clientdata(new_client, data);
+	new_client->addr = address;
+	new_client->adapter = adapter;
+	new_client->driver = &via686a_driver;
+	new_client->flags = 0;
+	new_client->dev.parent = &adapter->dev;
+
+	/* Fill in the remaining client fields and put into the global list */
+	snprintf(new_client->name, I2C_NAME_SIZE, client_name);
+
+	data->valid = 0;
+	init_MUTEX(&data->update_lock);
+	/* Tell the I2C layer a new client has arrived */
+	if ((err = i2c_attach_client(new_client)))
+		goto ERROR3;
+	
+	/* Initialize the VIA686A chip */
+	via686a_init_client(new_client);
+
+	/* Register sysfs hooks */
+	device_create_file(&new_client->dev, &dev_attr_in0_input);
+	device_create_file(&new_client->dev, &dev_attr_in1_input);
+	device_create_file(&new_client->dev, &dev_attr_in2_input);
+	device_create_file(&new_client->dev, &dev_attr_in3_input);
+	device_create_file(&new_client->dev, &dev_attr_in4_input);
+	device_create_file(&new_client->dev, &dev_attr_in0_min);
+	device_create_file(&new_client->dev, &dev_attr_in1_min);
+	device_create_file(&new_client->dev, &dev_attr_in2_min);
+	device_create_file(&new_client->dev, &dev_attr_in3_min);
+	device_create_file(&new_client->dev, &dev_attr_in4_min);
+	device_create_file(&new_client->dev, &dev_attr_in0_max);
+	device_create_file(&new_client->dev, &dev_attr_in1_max);
+	device_create_file(&new_client->dev, &dev_attr_in2_max);
+	device_create_file(&new_client->dev, &dev_attr_in3_max);
+	device_create_file(&new_client->dev, &dev_attr_in4_max);
+	device_create_file(&new_client->dev, &dev_attr_temp1_input);
+	device_create_file(&new_client->dev, &dev_attr_temp2_input);
+	device_create_file(&new_client->dev, &dev_attr_temp3_input);
+	device_create_file(&new_client->dev, &dev_attr_temp1_max);
+	device_create_file(&new_client->dev, &dev_attr_temp2_max);
+	device_create_file(&new_client->dev, &dev_attr_temp3_max);
+	device_create_file(&new_client->dev, &dev_attr_temp1_max_hyst);
+	device_create_file(&new_client->dev, &dev_attr_temp2_max_hyst);
+	device_create_file(&new_client->dev, &dev_attr_temp3_max_hyst);
+	device_create_file(&new_client->dev, &dev_attr_fan1_input);
+	device_create_file(&new_client->dev, &dev_attr_fan2_input);
+	device_create_file(&new_client->dev, &dev_attr_fan1_min);
+	device_create_file(&new_client->dev, &dev_attr_fan2_min);
+	device_create_file(&new_client->dev, &dev_attr_fan1_div);
+	device_create_file(&new_client->dev, &dev_attr_fan2_div);
+	device_create_file(&new_client->dev, &dev_attr_alarms);
+
+	return 0;
+
+      ERROR3:
+	kfree(data);
+      ERROR0:
+	release_region(address, VIA686A_EXTENT);
+	return err;
+}
+
+static int via686a_detach_client(struct i2c_client *client)
+{
+	int err;
+
+	if ((err = i2c_detach_client(client))) {
+		dev_err(&client->dev,
+		"Client deregistration failed, client not detached.\n");
+		return err;
+	}
+
+	release_region(client->addr, VIA686A_EXTENT);
+	kfree(i2c_get_clientdata(client));
+
+	return 0;
+}
+
+/* Called when we have found a new VIA686A. Set limits, etc. */
+static void via686a_init_client(struct i2c_client *client)
+{
+	u8 reg;
+
+	/* Start monitoring */
+	reg = via686a_read_value(client, VIA686A_REG_CONFIG);
+	via686a_write_value(client, VIA686A_REG_CONFIG, (reg|0x01)&0x7F);
+
+	/* Configure temp interrupt mode for continuous-interrupt operation */
+	via686a_write_value(client, VIA686A_REG_TEMP_MODE, 
+			    via686a_read_value(client, VIA686A_REG_TEMP_MODE) &
+			    !(VIA686A_TEMP_MODE_MASK | VIA686A_TEMP_MODE_CONTINUOUS));
+}
+
+static struct via686a_data *via686a_update_device(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct via686a_data *data = i2c_get_clientdata(client);
+	int i;
+
+	down(&data->update_lock);
+
+	if (time_after(jiffies, data->last_updated + HZ + HZ / 2)
+	    || !data->valid) {
+		for (i = 0; i <= 4; i++) {
+			data->in[i] =
+			    via686a_read_value(client, VIA686A_REG_IN(i));
+			data->in_min[i] = via686a_read_value(client,
+							     VIA686A_REG_IN_MIN
+							     (i));
+			data->in_max[i] =
+			    via686a_read_value(client, VIA686A_REG_IN_MAX(i));
+		}
+		for (i = 1; i <= 2; i++) {
+			data->fan[i - 1] =
+			    via686a_read_value(client, VIA686A_REG_FAN(i));
+			data->fan_min[i - 1] = via686a_read_value(client,
+						     VIA686A_REG_FAN_MIN(i));
+		}
+		for (i = 0; i <= 2; i++) {
+			data->temp[i] = via686a_read_value(client,
+						 VIA686A_REG_TEMP(i)) << 2;
+			data->temp_over[i] =
+			    via686a_read_value(client,
+					       VIA686A_REG_TEMP_OVER(i));
+			data->temp_hyst[i] =
+			    via686a_read_value(client,
+					       VIA686A_REG_TEMP_HYST(i));
+		}
+		/* add in lower 2 bits 
+		   temp1 uses bits 7-6 of VIA686A_REG_TEMP_LOW1
+		   temp2 uses bits 5-4 of VIA686A_REG_TEMP_LOW23
+		   temp3 uses bits 7-6 of VIA686A_REG_TEMP_LOW23
+		 */
+		data->temp[0] |= (via686a_read_value(client,
+						     VIA686A_REG_TEMP_LOW1)
+				  & 0xc0) >> 6;
+		data->temp[1] |=
+		    (via686a_read_value(client, VIA686A_REG_TEMP_LOW23) &
+		     0x30) >> 4;
+		data->temp[2] |=
+		    (via686a_read_value(client, VIA686A_REG_TEMP_LOW23) &
+		     0xc0) >> 6;
+
+		i = via686a_read_value(client, VIA686A_REG_FANDIV);
+		data->fan_div[0] = (i >> 4) & 0x03;
+		data->fan_div[1] = i >> 6;
+		data->alarms =
+		    via686a_read_value(client,
+				       VIA686A_REG_ALARM1) |
+		    (via686a_read_value(client, VIA686A_REG_ALARM2) << 8);
+		data->last_updated = jiffies;
+		data->valid = 1;
+	}
+
+	up(&data->update_lock);
+
+	return data;
+}
+
+static struct pci_device_id via686a_pci_ids[] = {
+       { PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686_4) },
+       { 0, }
+};
+
+MODULE_DEVICE_TABLE(pci, via686a_pci_ids);
+
+static int __devinit via686a_pci_probe(struct pci_dev *dev,
+                                      const struct pci_device_id *id)
+{
+       u16 val;
+       int addr = 0;
+
+       if (PCIBIOS_SUCCESSFUL !=
+           pci_read_config_word(dev, VIA686A_BASE_REG, &val))
+               return -ENODEV;
+
+       addr = val & ~(VIA686A_EXTENT - 1);
+       if (addr == 0 && force_addr == 0) {
+               dev_err(&dev->dev,"base address not set - upgrade BIOS or use force_addr=0xaddr\n");
+               return -ENODEV;
+       }
+       if (force_addr)
+               addr = force_addr;      /* so detect will get called */
+
+       if (!addr) {
+               dev_err(&dev->dev,"No Via 686A sensors found.\n");
+               return -ENODEV;
+       }
+       normal_isa[0] = addr;
+
+	s_bridge = pci_dev_get(dev);
+	if (i2c_add_driver(&via686a_driver)) {
+		pci_dev_put(s_bridge);
+		s_bridge = NULL;
+	}
+
+	/* Always return failure here.  This is to allow other drivers to bind
+	 * to this pci device.  We don't really want to have control over the
+	 * pci device, we only wanted to read as few register values from it.
+	 */
+	return -ENODEV;
+}
+
+static struct pci_driver via686a_pci_driver = {
+       .name		= "via686a",
+       .id_table	= via686a_pci_ids,
+       .probe		= via686a_pci_probe,
+};
+
+static int __init sm_via686a_init(void)
+{
+       return pci_register_driver(&via686a_pci_driver);
+}
+
+static void __exit sm_via686a_exit(void)
+{
+	pci_unregister_driver(&via686a_pci_driver);
+	if (s_bridge != NULL) {
+		i2c_del_driver(&via686a_driver);
+		pci_dev_put(s_bridge);
+		s_bridge = NULL;
+	}
+}
+
+MODULE_AUTHOR("Kyösti Mälkki <kmalkki@cc.hut.fi>, "
+              "Mark Studebaker <mdsxyz123@yahoo.com> "
+             "and Bob Dougherty <bobd@stanford.edu>");
+MODULE_DESCRIPTION("VIA 686A Sensor device");
+MODULE_LICENSE("GPL");
+
+module_init(sm_via686a_init);
+module_exit(sm_via686a_exit);
diff --git a/drivers/i2c/chips/w83627hf.c b/drivers/i2c/chips/w83627hf.c
new file mode 100644
index 00000000000..b1da5ed696d
--- /dev/null
+++ b/drivers/i2c/chips/w83627hf.c
@@ -0,0 +1,1511 @@
+/*
+    w83627hf.c - Part of lm_sensors, Linux kernel modules for hardware
+                monitoring
+    Copyright (c) 1998 - 2003  Frodo Looijaard <frodol@dds.nl>,
+    Philip Edelbrock <phil@netroedge.com>,
+    and Mark Studebaker <mdsxyz123@yahoo.com>
+    Ported to 2.6 by Bernhard C. Schrenk <clemy@clemy.org>
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+/*
+    Supports following chips:
+
+    Chip	#vin	#fanin	#pwm	#temp	wchipid	vendid	i2c	ISA
+    w83627hf	9	3	2	3	0x20	0x5ca3	no	yes(LPC)
+    w83627thf	7	3	3	3	0x90	0x5ca3	no	yes(LPC)
+    w83637hf	7	3	3	3	0x80	0x5ca3	no	yes(LPC)
+    w83697hf	8	2	2	2	0x60	0x5ca3	no	yes(LPC)
+
+    For other winbond chips, and for i2c support in the above chips,
+    use w83781d.c.
+
+    Note: automatic ("cruise") fan control for 697, 637 & 627thf not
+    supported yet.
+*/
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/jiffies.h>
+#include <linux/i2c.h>
+#include <linux/i2c-sensor.h>
+#include <linux/i2c-vid.h>
+#include <asm/io.h>
+#include "lm75.h"
+
+static u16 force_addr;
+module_param(force_addr, ushort, 0);
+MODULE_PARM_DESC(force_addr,
+		 "Initialize the base address of the sensors");
+static u8 force_i2c = 0x1f;
+module_param(force_i2c, byte, 0);
+MODULE_PARM_DESC(force_i2c,
+		 "Initialize the i2c address of the sensors");
+
+/* Addresses to scan */
+static unsigned short normal_i2c[] = { I2C_CLIENT_END };
+static unsigned int normal_isa[] = { 0, I2C_CLIENT_ISA_END };
+
+/* Insmod parameters */
+SENSORS_INSMOD_4(w83627hf, w83627thf, w83697hf, w83637hf);
+
+static int init = 1;
+module_param(init, bool, 0);
+MODULE_PARM_DESC(init, "Set to zero to bypass chip initialization");
+
+/* modified from kernel/include/traps.c */
+static int REG;		/* The register to read/write */
+#define	DEV	0x07	/* Register: Logical device select */
+static int VAL;		/* The value to read/write */
+
+/* logical device numbers for superio_select (below) */
+#define W83627HF_LD_FDC		0x00
+#define W83627HF_LD_PRT		0x01
+#define W83627HF_LD_UART1	0x02
+#define W83627HF_LD_UART2	0x03
+#define W83627HF_LD_KBC		0x05
+#define W83627HF_LD_CIR		0x06 /* w83627hf only */
+#define W83627HF_LD_GAME	0x07
+#define W83627HF_LD_MIDI	0x07
+#define W83627HF_LD_GPIO1	0x07
+#define W83627HF_LD_GPIO5	0x07 /* w83627thf only */
+#define W83627HF_LD_GPIO2	0x08
+#define W83627HF_LD_GPIO3	0x09
+#define W83627HF_LD_GPIO4	0x09 /* w83627thf only */
+#define W83627HF_LD_ACPI	0x0a
+#define W83627HF_LD_HWM		0x0b
+
+#define	DEVID	0x20	/* Register: Device ID */
+
+#define W83627THF_GPIO5_EN	0x30 /* w83627thf only */
+#define W83627THF_GPIO5_IOSR	0xf3 /* w83627thf only */
+#define W83627THF_GPIO5_DR	0xf4 /* w83627thf only */
+
+static inline void
+superio_outb(int reg, int val)
+{
+	outb(reg, REG);
+	outb(val, VAL);
+}
+
+static inline int
+superio_inb(int reg)
+{
+	outb(reg, REG);
+	return inb(VAL);
+}
+
+static inline void
+superio_select(int ld)
+{
+	outb(DEV, REG);
+	outb(ld, VAL);
+}
+
+static inline void
+superio_enter(void)
+{
+	outb(0x87, REG);
+	outb(0x87, REG);
+}
+
+static inline void
+superio_exit(void)
+{
+	outb(0xAA, REG);
+}
+
+#define W627_DEVID 0x52
+#define W627THF_DEVID 0x82
+#define W697_DEVID 0x60
+#define W637_DEVID 0x70
+#define WINB_ACT_REG 0x30
+#define WINB_BASE_REG 0x60
+/* Constants specified below */
+
+/* Length of ISA address segment */
+#define WINB_EXTENT 8
+
+/* Where are the ISA address/data registers relative to the base address */
+#define W83781D_ADDR_REG_OFFSET 5
+#define W83781D_DATA_REG_OFFSET 6
+
+/* The W83781D registers */
+/* The W83782D registers for nr=7,8 are in bank 5 */
+#define W83781D_REG_IN_MAX(nr) ((nr < 7) ? (0x2b + (nr) * 2) : \
+					   (0x554 + (((nr) - 7) * 2)))
+#define W83781D_REG_IN_MIN(nr) ((nr < 7) ? (0x2c + (nr) * 2) : \
+					   (0x555 + (((nr) - 7) * 2)))
+#define W83781D_REG_IN(nr)     ((nr < 7) ? (0x20 + (nr)) : \
+					   (0x550 + (nr) - 7))
+
+#define W83781D_REG_FAN_MIN(nr) (0x3a + (nr))
+#define W83781D_REG_FAN(nr) (0x27 + (nr))
+
+#define W83781D_REG_TEMP2_CONFIG 0x152
+#define W83781D_REG_TEMP3_CONFIG 0x252
+#define W83781D_REG_TEMP(nr)		((nr == 3) ? (0x0250) : \
+					((nr == 2) ? (0x0150) : \
+					             (0x27)))
+#define W83781D_REG_TEMP_HYST(nr)	((nr == 3) ? (0x253) : \
+					((nr == 2) ? (0x153) : \
+					             (0x3A)))
+#define W83781D_REG_TEMP_OVER(nr)	((nr == 3) ? (0x255) : \
+					((nr == 2) ? (0x155) : \
+					             (0x39)))
+
+#define W83781D_REG_BANK 0x4E
+
+#define W83781D_REG_CONFIG 0x40
+#define W83781D_REG_ALARM1 0x41
+#define W83781D_REG_ALARM2 0x42
+#define W83781D_REG_ALARM3 0x450
+
+#define W83781D_REG_IRQ 0x4C
+#define W83781D_REG_BEEP_CONFIG 0x4D
+#define W83781D_REG_BEEP_INTS1 0x56
+#define W83781D_REG_BEEP_INTS2 0x57
+#define W83781D_REG_BEEP_INTS3 0x453
+
+#define W83781D_REG_VID_FANDIV 0x47
+
+#define W83781D_REG_CHIPID 0x49
+#define W83781D_REG_WCHIPID 0x58
+#define W83781D_REG_CHIPMAN 0x4F
+#define W83781D_REG_PIN 0x4B
+
+#define W83781D_REG_VBAT 0x5D
+
+#define W83627HF_REG_PWM1 0x5A
+#define W83627HF_REG_PWM2 0x5B
+#define W83627HF_REG_PWMCLK12 0x5C
+
+#define W83627THF_REG_PWM1		0x01	/* 697HF and 637HF too */
+#define W83627THF_REG_PWM2		0x03	/* 697HF and 637HF too */
+#define W83627THF_REG_PWM3		0x11	/* 637HF too */
+
+#define W83627THF_REG_VRM_OVT_CFG 	0x18	/* 637HF too */
+
+static const u8 regpwm_627hf[] = { W83627HF_REG_PWM1, W83627HF_REG_PWM2 };
+static const u8 regpwm[] = { W83627THF_REG_PWM1, W83627THF_REG_PWM2,
+                             W83627THF_REG_PWM3 };
+#define W836X7HF_REG_PWM(type, nr) (((type) == w83627hf) ? \
+                                     regpwm_627hf[(nr) - 1] : regpwm[(nr) - 1])
+
+#define W83781D_REG_I2C_ADDR 0x48
+#define W83781D_REG_I2C_SUBADDR 0x4A
+
+/* Sensor selection */
+#define W83781D_REG_SCFG1 0x5D
+static const u8 BIT_SCFG1[] = { 0x02, 0x04, 0x08 };
+#define W83781D_REG_SCFG2 0x59
+static const u8 BIT_SCFG2[] = { 0x10, 0x20, 0x40 };
+#define W83781D_DEFAULT_BETA 3435
+
+/* Conversions. Limit checking is only done on the TO_REG
+   variants. Note that you should be a bit careful with which arguments
+   these macros are called: arguments may be evaluated more than once.
+   Fixing this is just not worth it. */
+#define IN_TO_REG(val)  (SENSORS_LIMIT((((val) + 8)/16),0,255))
+#define IN_FROM_REG(val) ((val) * 16)
+
+static inline u8 FAN_TO_REG(long rpm, int div)
+{
+	if (rpm == 0)
+		return 255;
+	rpm = SENSORS_LIMIT(rpm, 1, 1000000);
+	return SENSORS_LIMIT((1350000 + rpm * div / 2) / (rpm * div), 1,
+			     254);
+}
+
+#define TEMP_MIN (-128000)
+#define TEMP_MAX ( 127000)
+
+/* TEMP: 0.001C/bit (-128C to +127C)
+   REG: 1C/bit, two's complement */
+static u8 TEMP_TO_REG(int temp)
+{
+        int ntemp = SENSORS_LIMIT(temp, TEMP_MIN, TEMP_MAX);
+        ntemp += (ntemp<0 ? -500 : 500);
+        return (u8)(ntemp / 1000);
+}
+
+static int TEMP_FROM_REG(u8 reg)
+{
+        return (s8)reg * 1000;
+}
+
+#define FAN_FROM_REG(val,div) ((val)==0?-1:(val)==255?0:1350000/((val)*(div)))
+
+#define PWM_TO_REG(val) (SENSORS_LIMIT((val),0,255))
+
+#define BEEP_MASK_FROM_REG(val)		 (val)
+#define BEEP_MASK_TO_REG(val)		((val) & 0xffffff)
+#define BEEP_ENABLE_TO_REG(val)		((val)?1:0)
+#define BEEP_ENABLE_FROM_REG(val)	((val)?1:0)
+
+#define DIV_FROM_REG(val) (1 << (val))
+
+static inline u8 DIV_TO_REG(long val)
+{
+	int i;
+	val = SENSORS_LIMIT(val, 1, 128) >> 1;
+	for (i = 0; i < 6; i++) {
+		if (val == 0)
+			break;
+		val >>= 1;
+	}
+	return ((u8) i);
+}
+
+/* For each registered chip, we need to keep some data in memory. That
+   data is pointed to by w83627hf_list[NR]->data. The structure itself is
+   dynamically allocated, at the same time when a new client is allocated. */
+struct w83627hf_data {
+	struct i2c_client client;
+	struct semaphore lock;
+	enum chips type;
+
+	struct semaphore update_lock;
+	char valid;		/* !=0 if following fields are valid */
+	unsigned long last_updated;	/* In jiffies */
+
+	struct i2c_client *lm75;	/* for secondary I2C addresses */
+	/* pointer to array of 2 subclients */
+
+	u8 in[9];		/* Register value */
+	u8 in_max[9];		/* Register value */
+	u8 in_min[9];		/* Register value */
+	u8 fan[3];		/* Register value */
+	u8 fan_min[3];		/* Register value */
+	u8 temp;
+	u8 temp_max;		/* Register value */
+	u8 temp_max_hyst;	/* Register value */
+	u16 temp_add[2];	/* Register value */
+	u16 temp_max_add[2];	/* Register value */
+	u16 temp_max_hyst_add[2]; /* Register value */
+	u8 fan_div[3];		/* Register encoding, shifted right */
+	u8 vid;			/* Register encoding, combined */
+	u32 alarms;		/* Register encoding, combined */
+	u32 beep_mask;		/* Register encoding, combined */
+	u8 beep_enable;		/* Boolean */
+	u8 pwm[3];		/* Register value */
+	u16 sens[3];		/* 782D/783S only.
+				   1 = pentium diode; 2 = 3904 diode;
+				   3000-5000 = thermistor beta.
+				   Default = 3435.
+				   Other Betas unimplemented */
+	u8 vrm;
+	u8 vrm_ovt;		/* Register value, 627thf & 637hf only */
+};
+
+
+static int w83627hf_attach_adapter(struct i2c_adapter *adapter);
+static int w83627hf_detect(struct i2c_adapter *adapter, int address,
+			  int kind);
+static int w83627hf_detach_client(struct i2c_client *client);
+
+static int w83627hf_read_value(struct i2c_client *client, u16 register);
+static int w83627hf_write_value(struct i2c_client *client, u16 register,
+			       u16 value);
+static struct w83627hf_data *w83627hf_update_device(struct device *dev);
+static void w83627hf_init_client(struct i2c_client *client);
+
+static struct i2c_driver w83627hf_driver = {
+	.owner		= THIS_MODULE,
+	.name		= "w83627hf",
+	.id		= I2C_DRIVERID_W83627HF,
+	.flags		= I2C_DF_NOTIFY,
+	.attach_adapter	= w83627hf_attach_adapter,
+	.detach_client	= w83627hf_detach_client,
+};
+
+/* following are the sysfs callback functions */
+#define show_in_reg(reg) \
+static ssize_t show_##reg (struct device *dev, char *buf, int nr) \
+{ \
+	struct w83627hf_data *data = w83627hf_update_device(dev); \
+	return sprintf(buf,"%ld\n", (long)IN_FROM_REG(data->reg[nr])); \
+}
+show_in_reg(in)
+show_in_reg(in_min)
+show_in_reg(in_max)
+
+#define store_in_reg(REG, reg) \
+static ssize_t \
+store_in_##reg (struct device *dev, const char *buf, size_t count, int nr) \
+{ \
+	struct i2c_client *client = to_i2c_client(dev); \
+	struct w83627hf_data *data = i2c_get_clientdata(client); \
+	u32 val; \
+	 \
+	val = simple_strtoul(buf, NULL, 10); \
+	 \
+	down(&data->update_lock); \
+	data->in_##reg[nr] = IN_TO_REG(val); \
+	w83627hf_write_value(client, W83781D_REG_IN_##REG(nr), \
+			    data->in_##reg[nr]); \
+	 \
+	up(&data->update_lock); \
+	return count; \
+}
+store_in_reg(MIN, min)
+store_in_reg(MAX, max)
+
+#define sysfs_in_offset(offset) \
+static ssize_t \
+show_regs_in_##offset (struct device *dev, char *buf) \
+{ \
+        return show_in(dev, buf, offset); \
+} \
+static DEVICE_ATTR(in##offset##_input, S_IRUGO, show_regs_in_##offset, NULL);
+
+#define sysfs_in_reg_offset(reg, offset) \
+static ssize_t show_regs_in_##reg##offset (struct device *dev, char *buf) \
+{ \
+	return show_in_##reg (dev, buf, offset); \
+} \
+static ssize_t \
+store_regs_in_##reg##offset (struct device *dev, \
+			    const char *buf, size_t count) \
+{ \
+	return store_in_##reg (dev, buf, count, offset); \
+} \
+static DEVICE_ATTR(in##offset##_##reg, S_IRUGO| S_IWUSR, \
+		  show_regs_in_##reg##offset, store_regs_in_##reg##offset);
+
+#define sysfs_in_offsets(offset) \
+sysfs_in_offset(offset) \
+sysfs_in_reg_offset(min, offset) \
+sysfs_in_reg_offset(max, offset)
+
+sysfs_in_offsets(1);
+sysfs_in_offsets(2);
+sysfs_in_offsets(3);
+sysfs_in_offsets(4);
+sysfs_in_offsets(5);
+sysfs_in_offsets(6);
+sysfs_in_offsets(7);
+sysfs_in_offsets(8);
+
+/* use a different set of functions for in0 */
+static ssize_t show_in_0(struct w83627hf_data *data, char *buf, u8 reg)
+{
+	long in0;
+
+	if ((data->vrm_ovt & 0x01) &&
+		(w83627thf == data->type || w83637hf == data->type))
+
+		/* use VRM9 calculation */
+		in0 = (long)((reg * 488 + 70000 + 50) / 100);
+	else
+		/* use VRM8 (standard) calculation */
+		in0 = (long)IN_FROM_REG(reg);
+
+	return sprintf(buf,"%ld\n", in0);
+}
+
+static ssize_t show_regs_in_0(struct device *dev, char *buf)
+{
+	struct w83627hf_data *data = w83627hf_update_device(dev);
+	return show_in_0(data, buf, data->in[0]);
+}
+
+static ssize_t show_regs_in_min0(struct device *dev, char *buf)
+{
+	struct w83627hf_data *data = w83627hf_update_device(dev);
+	return show_in_0(data, buf, data->in_min[0]);
+}
+
+static ssize_t show_regs_in_max0(struct device *dev, char *buf)
+{
+	struct w83627hf_data *data = w83627hf_update_device(dev);
+	return show_in_0(data, buf, data->in_max[0]);
+}
+
+static ssize_t store_regs_in_min0(struct device *dev,
+	const char *buf, size_t count)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct w83627hf_data *data = i2c_get_clientdata(client);
+	u32 val;
+
+	val = simple_strtoul(buf, NULL, 10);
+
+	down(&data->update_lock);
+	
+	if ((data->vrm_ovt & 0x01) &&
+		(w83627thf == data->type || w83637hf == data->type))
+
+		/* use VRM9 calculation */
+		data->in_min[0] = (u8)(((val * 100) - 70000 + 244) / 488);
+	else
+		/* use VRM8 (standard) calculation */
+		data->in_min[0] = IN_TO_REG(val);
+
+	w83627hf_write_value(client, W83781D_REG_IN_MIN(0), data->in_min[0]);
+	up(&data->update_lock);
+	return count;
+}
+
+static ssize_t store_regs_in_max0(struct device *dev,
+	const char *buf, size_t count)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct w83627hf_data *data = i2c_get_clientdata(client);
+	u32 val;
+
+	val = simple_strtoul(buf, NULL, 10);
+
+	down(&data->update_lock);
+
+	if ((data->vrm_ovt & 0x01) &&
+		(w83627thf == data->type || w83637hf == data->type))
+		
+		/* use VRM9 calculation */
+		data->in_max[0] = (u8)(((val * 100) - 70000 + 244) / 488);
+	else
+		/* use VRM8 (standard) calculation */
+		data->in_max[0] = IN_TO_REG(val);
+
+	w83627hf_write_value(client, W83781D_REG_IN_MAX(0), data->in_max[0]);
+	up(&data->update_lock);
+	return count;
+}
+
+static DEVICE_ATTR(in0_input, S_IRUGO, show_regs_in_0, NULL);
+static DEVICE_ATTR(in0_min, S_IRUGO | S_IWUSR,
+	show_regs_in_min0, store_regs_in_min0);
+static DEVICE_ATTR(in0_max, S_IRUGO | S_IWUSR,
+	show_regs_in_max0, store_regs_in_max0);
+
+#define device_create_file_in(client, offset) \
+do { \
+device_create_file(&client->dev, &dev_attr_in##offset##_input); \
+device_create_file(&client->dev, &dev_attr_in##offset##_min); \
+device_create_file(&client->dev, &dev_attr_in##offset##_max); \
+} while (0)
+
+#define show_fan_reg(reg) \
+static ssize_t show_##reg (struct device *dev, char *buf, int nr) \
+{ \
+	struct w83627hf_data *data = w83627hf_update_device(dev); \
+	return sprintf(buf,"%ld\n", \
+		FAN_FROM_REG(data->reg[nr-1], \
+			    (long)DIV_FROM_REG(data->fan_div[nr-1]))); \
+}
+show_fan_reg(fan);
+show_fan_reg(fan_min);
+
+static ssize_t
+store_fan_min(struct device *dev, const char *buf, size_t count, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct w83627hf_data *data = i2c_get_clientdata(client);
+	u32 val;
+
+	val = simple_strtoul(buf, NULL, 10);
+
+	down(&data->update_lock);
+	data->fan_min[nr - 1] =
+	    FAN_TO_REG(val, DIV_FROM_REG(data->fan_div[nr - 1]));
+	w83627hf_write_value(client, W83781D_REG_FAN_MIN(nr),
+			    data->fan_min[nr - 1]);
+
+	up(&data->update_lock);
+	return count;
+}
+
+#define sysfs_fan_offset(offset) \
+static ssize_t show_regs_fan_##offset (struct device *dev, char *buf) \
+{ \
+	return show_fan(dev, buf, offset); \
+} \
+static DEVICE_ATTR(fan##offset##_input, S_IRUGO, show_regs_fan_##offset, NULL);
+
+#define sysfs_fan_min_offset(offset) \
+static ssize_t show_regs_fan_min##offset (struct device *dev, char *buf) \
+{ \
+	return show_fan_min(dev, buf, offset); \
+} \
+static ssize_t \
+store_regs_fan_min##offset (struct device *dev, const char *buf, size_t count) \
+{ \
+	return store_fan_min(dev, buf, count, offset); \
+} \
+static DEVICE_ATTR(fan##offset##_min, S_IRUGO | S_IWUSR, \
+		  show_regs_fan_min##offset, store_regs_fan_min##offset);
+
+sysfs_fan_offset(1);
+sysfs_fan_min_offset(1);
+sysfs_fan_offset(2);
+sysfs_fan_min_offset(2);
+sysfs_fan_offset(3);
+sysfs_fan_min_offset(3);
+
+#define device_create_file_fan(client, offset) \
+do { \
+device_create_file(&client->dev, &dev_attr_fan##offset##_input); \
+device_create_file(&client->dev, &dev_attr_fan##offset##_min); \
+} while (0)
+
+#define show_temp_reg(reg) \
+static ssize_t show_##reg (struct device *dev, char *buf, int nr) \
+{ \
+	struct w83627hf_data *data = w83627hf_update_device(dev); \
+	if (nr >= 2) {	/* TEMP2 and TEMP3 */ \
+		return sprintf(buf,"%ld\n", \
+			(long)LM75_TEMP_FROM_REG(data->reg##_add[nr-2])); \
+	} else {	/* TEMP1 */ \
+		return sprintf(buf,"%ld\n", (long)TEMP_FROM_REG(data->reg)); \
+	} \
+}
+show_temp_reg(temp);
+show_temp_reg(temp_max);
+show_temp_reg(temp_max_hyst);
+
+#define store_temp_reg(REG, reg) \
+static ssize_t \
+store_temp_##reg (struct device *dev, const char *buf, size_t count, int nr) \
+{ \
+	struct i2c_client *client = to_i2c_client(dev); \
+	struct w83627hf_data *data = i2c_get_clientdata(client); \
+	u32 val; \
+	 \
+	val = simple_strtoul(buf, NULL, 10); \
+	 \
+	down(&data->update_lock); \
+	 \
+	if (nr >= 2) {	/* TEMP2 and TEMP3 */ \
+		data->temp_##reg##_add[nr-2] = LM75_TEMP_TO_REG(val); \
+		w83627hf_write_value(client, W83781D_REG_TEMP_##REG(nr), \
+				data->temp_##reg##_add[nr-2]); \
+	} else {	/* TEMP1 */ \
+		data->temp_##reg = TEMP_TO_REG(val); \
+		w83627hf_write_value(client, W83781D_REG_TEMP_##REG(nr), \
+			data->temp_##reg); \
+	} \
+	 \
+	up(&data->update_lock); \
+	return count; \
+}
+store_temp_reg(OVER, max);
+store_temp_reg(HYST, max_hyst);
+
+#define sysfs_temp_offset(offset) \
+static ssize_t \
+show_regs_temp_##offset (struct device *dev, char *buf) \
+{ \
+	return show_temp(dev, buf, offset); \
+} \
+static DEVICE_ATTR(temp##offset##_input, S_IRUGO, show_regs_temp_##offset, NULL);
+
+#define sysfs_temp_reg_offset(reg, offset) \
+static ssize_t show_regs_temp_##reg##offset (struct device *dev, char *buf) \
+{ \
+	return show_temp_##reg (dev, buf, offset); \
+} \
+static ssize_t \
+store_regs_temp_##reg##offset (struct device *dev, \
+			      const char *buf, size_t count) \
+{ \
+	return store_temp_##reg (dev, buf, count, offset); \
+} \
+static DEVICE_ATTR(temp##offset##_##reg, S_IRUGO| S_IWUSR, \
+		  show_regs_temp_##reg##offset, store_regs_temp_##reg##offset);
+
+#define sysfs_temp_offsets(offset) \
+sysfs_temp_offset(offset) \
+sysfs_temp_reg_offset(max, offset) \
+sysfs_temp_reg_offset(max_hyst, offset)
+
+sysfs_temp_offsets(1);
+sysfs_temp_offsets(2);
+sysfs_temp_offsets(3);
+
+#define device_create_file_temp(client, offset) \
+do { \
+device_create_file(&client->dev, &dev_attr_temp##offset##_input); \
+device_create_file(&client->dev, &dev_attr_temp##offset##_max); \
+device_create_file(&client->dev, &dev_attr_temp##offset##_max_hyst); \
+} while (0)
+
+static ssize_t
+show_vid_reg(struct device *dev, char *buf)
+{
+	struct w83627hf_data *data = w83627hf_update_device(dev);
+	return sprintf(buf, "%ld\n", (long) vid_from_reg(data->vid, data->vrm));
+}
+static DEVICE_ATTR(cpu0_vid, S_IRUGO, show_vid_reg, NULL);
+#define device_create_file_vid(client) \
+device_create_file(&client->dev, &dev_attr_cpu0_vid)
+
+static ssize_t
+show_vrm_reg(struct device *dev, char *buf)
+{
+	struct w83627hf_data *data = w83627hf_update_device(dev);
+	return sprintf(buf, "%ld\n", (long) data->vrm);
+}
+static ssize_t
+store_vrm_reg(struct device *dev, const char *buf, size_t count)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct w83627hf_data *data = i2c_get_clientdata(client);
+	u32 val;
+
+	val = simple_strtoul(buf, NULL, 10);
+	data->vrm = val;
+
+	return count;
+}
+static DEVICE_ATTR(vrm, S_IRUGO | S_IWUSR, show_vrm_reg, store_vrm_reg);
+#define device_create_file_vrm(client) \
+device_create_file(&client->dev, &dev_attr_vrm)
+
+static ssize_t
+show_alarms_reg(struct device *dev, char *buf)
+{
+	struct w83627hf_data *data = w83627hf_update_device(dev);
+	return sprintf(buf, "%ld\n", (long) data->alarms);
+}
+static DEVICE_ATTR(alarms, S_IRUGO, show_alarms_reg, NULL);
+#define device_create_file_alarms(client) \
+device_create_file(&client->dev, &dev_attr_alarms)
+
+#define show_beep_reg(REG, reg) \
+static ssize_t show_beep_##reg (struct device *dev, char *buf) \
+{ \
+	struct w83627hf_data *data = w83627hf_update_device(dev); \
+	return sprintf(buf,"%ld\n", \
+		      (long)BEEP_##REG##_FROM_REG(data->beep_##reg)); \
+}
+show_beep_reg(ENABLE, enable)
+show_beep_reg(MASK, mask)
+
+#define BEEP_ENABLE			0	/* Store beep_enable */
+#define BEEP_MASK			1	/* Store beep_mask */
+
+static ssize_t
+store_beep_reg(struct device *dev, const char *buf, size_t count,
+	       int update_mask)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct w83627hf_data *data = i2c_get_clientdata(client);
+	u32 val, val2;
+
+	val = simple_strtoul(buf, NULL, 10);
+
+	down(&data->update_lock);
+
+	if (update_mask == BEEP_MASK) {	/* We are storing beep_mask */
+		data->beep_mask = BEEP_MASK_TO_REG(val);
+		w83627hf_write_value(client, W83781D_REG_BEEP_INTS1,
+				    data->beep_mask & 0xff);
+		w83627hf_write_value(client, W83781D_REG_BEEP_INTS3,
+				    ((data->beep_mask) >> 16) & 0xff);
+		val2 = (data->beep_mask >> 8) & 0x7f;
+	} else {		/* We are storing beep_enable */
+		val2 =
+		    w83627hf_read_value(client, W83781D_REG_BEEP_INTS2) & 0x7f;
+		data->beep_enable = BEEP_ENABLE_TO_REG(val);
+	}
+
+	w83627hf_write_value(client, W83781D_REG_BEEP_INTS2,
+			    val2 | data->beep_enable << 7);
+
+	up(&data->update_lock);
+	return count;
+}
+
+#define sysfs_beep(REG, reg) \
+static ssize_t show_regs_beep_##reg (struct device *dev, char *buf) \
+{ \
+	return show_beep_##reg(dev, buf); \
+} \
+static ssize_t \
+store_regs_beep_##reg (struct device *dev, const char *buf, size_t count) \
+{ \
+	return store_beep_reg(dev, buf, count, BEEP_##REG); \
+} \
+static DEVICE_ATTR(beep_##reg, S_IRUGO | S_IWUSR, \
+		  show_regs_beep_##reg, store_regs_beep_##reg);
+
+sysfs_beep(ENABLE, enable);
+sysfs_beep(MASK, mask);
+
+#define device_create_file_beep(client) \
+do { \
+device_create_file(&client->dev, &dev_attr_beep_enable); \
+device_create_file(&client->dev, &dev_attr_beep_mask); \
+} while (0)
+
+static ssize_t
+show_fan_div_reg(struct device *dev, char *buf, int nr)
+{
+	struct w83627hf_data *data = w83627hf_update_device(dev);
+	return sprintf(buf, "%ld\n",
+		       (long) DIV_FROM_REG(data->fan_div[nr - 1]));
+}
+
+/* Note: we save and restore the fan minimum here, because its value is
+   determined in part by the fan divisor.  This follows the principle of
+   least suprise; the user doesn't expect the fan minimum to change just
+   because the divisor changed. */
+static ssize_t
+store_fan_div_reg(struct device *dev, const char *buf, size_t count, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct w83627hf_data *data = i2c_get_clientdata(client);
+	unsigned long min;
+	u8 reg;
+	unsigned long val = simple_strtoul(buf, NULL, 10);
+
+	down(&data->update_lock);
+
+	/* Save fan_min */
+	min = FAN_FROM_REG(data->fan_min[nr],
+			   DIV_FROM_REG(data->fan_div[nr]));
+
+	data->fan_div[nr] = DIV_TO_REG(val);
+
+	reg = (w83627hf_read_value(client, nr==2 ? W83781D_REG_PIN : W83781D_REG_VID_FANDIV)
+	       & (nr==0 ? 0xcf : 0x3f))
+	    | ((data->fan_div[nr] & 0x03) << (nr==0 ? 4 : 6));
+	w83627hf_write_value(client, nr==2 ? W83781D_REG_PIN : W83781D_REG_VID_FANDIV, reg);
+
+	reg = (w83627hf_read_value(client, W83781D_REG_VBAT)
+	       & ~(1 << (5 + nr)))
+	    | ((data->fan_div[nr] & 0x04) << (3 + nr));
+	w83627hf_write_value(client, W83781D_REG_VBAT, reg);
+
+	/* Restore fan_min */
+	data->fan_min[nr] = FAN_TO_REG(min, DIV_FROM_REG(data->fan_div[nr]));
+	w83627hf_write_value(client, W83781D_REG_FAN_MIN(nr+1), data->fan_min[nr]);
+
+	up(&data->update_lock);
+	return count;
+}
+
+#define sysfs_fan_div(offset) \
+static ssize_t show_regs_fan_div_##offset (struct device *dev, char *buf) \
+{ \
+	return show_fan_div_reg(dev, buf, offset); \
+} \
+static ssize_t \
+store_regs_fan_div_##offset (struct device *dev, \
+			    const char *buf, size_t count) \
+{ \
+	return store_fan_div_reg(dev, buf, count, offset - 1); \
+} \
+static DEVICE_ATTR(fan##offset##_div, S_IRUGO | S_IWUSR, \
+		  show_regs_fan_div_##offset, store_regs_fan_div_##offset);
+
+sysfs_fan_div(1);
+sysfs_fan_div(2);
+sysfs_fan_div(3);
+
+#define device_create_file_fan_div(client, offset) \
+do { \
+device_create_file(&client->dev, &dev_attr_fan##offset##_div); \
+} while (0)
+
+static ssize_t
+show_pwm_reg(struct device *dev, char *buf, int nr)
+{
+	struct w83627hf_data *data = w83627hf_update_device(dev);
+	return sprintf(buf, "%ld\n", (long) data->pwm[nr - 1]);
+}
+
+static ssize_t
+store_pwm_reg(struct device *dev, const char *buf, size_t count, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct w83627hf_data *data = i2c_get_clientdata(client);
+	u32 val;
+
+	val = simple_strtoul(buf, NULL, 10);
+
+	down(&data->update_lock);
+
+	if (data->type == w83627thf) {
+		/* bits 0-3 are reserved  in 627THF */
+		data->pwm[nr - 1] = PWM_TO_REG(val) & 0xf0;
+		w83627hf_write_value(client,
+				     W836X7HF_REG_PWM(data->type, nr),
+				     data->pwm[nr - 1] |
+				     (w83627hf_read_value(client,
+				     W836X7HF_REG_PWM(data->type, nr)) & 0x0f));
+	} else {
+		data->pwm[nr - 1] = PWM_TO_REG(val);
+		w83627hf_write_value(client,
+				     W836X7HF_REG_PWM(data->type, nr),
+				     data->pwm[nr - 1]);
+	}
+
+	up(&data->update_lock);
+	return count;
+}
+
+#define sysfs_pwm(offset) \
+static ssize_t show_regs_pwm_##offset (struct device *dev, char *buf) \
+{ \
+	return show_pwm_reg(dev, buf, offset); \
+} \
+static ssize_t \
+store_regs_pwm_##offset (struct device *dev, const char *buf, size_t count) \
+{ \
+	return store_pwm_reg(dev, buf, count, offset); \
+} \
+static DEVICE_ATTR(pwm##offset, S_IRUGO | S_IWUSR, \
+		  show_regs_pwm_##offset, store_regs_pwm_##offset);
+
+sysfs_pwm(1);
+sysfs_pwm(2);
+sysfs_pwm(3);
+
+#define device_create_file_pwm(client, offset) \
+do { \
+device_create_file(&client->dev, &dev_attr_pwm##offset); \
+} while (0)
+
+static ssize_t
+show_sensor_reg(struct device *dev, char *buf, int nr)
+{
+	struct w83627hf_data *data = w83627hf_update_device(dev);
+	return sprintf(buf, "%ld\n", (long) data->sens[nr - 1]);
+}
+
+static ssize_t
+store_sensor_reg(struct device *dev, const char *buf, size_t count, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct w83627hf_data *data = i2c_get_clientdata(client);
+	u32 val, tmp;
+
+	val = simple_strtoul(buf, NULL, 10);
+
+	down(&data->update_lock);
+
+	switch (val) {
+	case 1:		/* PII/Celeron diode */
+		tmp = w83627hf_read_value(client, W83781D_REG_SCFG1);
+		w83627hf_write_value(client, W83781D_REG_SCFG1,
+				    tmp | BIT_SCFG1[nr - 1]);
+		tmp = w83627hf_read_value(client, W83781D_REG_SCFG2);
+		w83627hf_write_value(client, W83781D_REG_SCFG2,
+				    tmp | BIT_SCFG2[nr - 1]);
+		data->sens[nr - 1] = val;
+		break;
+	case 2:		/* 3904 */
+		tmp = w83627hf_read_value(client, W83781D_REG_SCFG1);
+		w83627hf_write_value(client, W83781D_REG_SCFG1,
+				    tmp | BIT_SCFG1[nr - 1]);
+		tmp = w83627hf_read_value(client, W83781D_REG_SCFG2);
+		w83627hf_write_value(client, W83781D_REG_SCFG2,
+				    tmp & ~BIT_SCFG2[nr - 1]);
+		data->sens[nr - 1] = val;
+		break;
+	case W83781D_DEFAULT_BETA:	/* thermistor */
+		tmp = w83627hf_read_value(client, W83781D_REG_SCFG1);
+		w83627hf_write_value(client, W83781D_REG_SCFG1,
+				    tmp & ~BIT_SCFG1[nr - 1]);
+		data->sens[nr - 1] = val;
+		break;
+	default:
+		dev_err(&client->dev,
+		       "Invalid sensor type %ld; must be 1, 2, or %d\n",
+		       (long) val, W83781D_DEFAULT_BETA);
+		break;
+	}
+
+	up(&data->update_lock);
+	return count;
+}
+
+#define sysfs_sensor(offset) \
+static ssize_t show_regs_sensor_##offset (struct device *dev, char *buf) \
+{ \
+    return show_sensor_reg(dev, buf, offset); \
+} \
+static ssize_t \
+store_regs_sensor_##offset (struct device *dev, const char *buf, size_t count) \
+{ \
+    return store_sensor_reg(dev, buf, count, offset); \
+} \
+static DEVICE_ATTR(temp##offset##_type, S_IRUGO | S_IWUSR, \
+		  show_regs_sensor_##offset, store_regs_sensor_##offset);
+
+sysfs_sensor(1);
+sysfs_sensor(2);
+sysfs_sensor(3);
+
+#define device_create_file_sensor(client, offset) \
+do { \
+device_create_file(&client->dev, &dev_attr_temp##offset##_type); \
+} while (0)
+
+
+/* This function is called when:
+     * w83627hf_driver is inserted (when this module is loaded), for each
+       available adapter
+     * when a new adapter is inserted (and w83627hf_driver is still present) */
+static int w83627hf_attach_adapter(struct i2c_adapter *adapter)
+{
+	return i2c_detect(adapter, &addr_data, w83627hf_detect);
+}
+
+static int w83627hf_find(int sioaddr, int *address)
+{
+	u16 val;
+
+	REG = sioaddr;
+	VAL = sioaddr + 1;
+
+	superio_enter();
+	val= superio_inb(DEVID);
+	if(val != W627_DEVID &&
+	   val != W627THF_DEVID &&
+	   val != W697_DEVID &&
+	   val != W637_DEVID) {
+		superio_exit();
+		return -ENODEV;
+	}
+
+	superio_select(W83627HF_LD_HWM);
+	val = (superio_inb(WINB_BASE_REG) << 8) |
+	       superio_inb(WINB_BASE_REG + 1);
+	*address = val & ~(WINB_EXTENT - 1);
+	if (*address == 0 && force_addr == 0) {
+		superio_exit();
+		return -ENODEV;
+	}
+	if (force_addr)
+		*address = force_addr;	/* so detect will get called */
+
+	superio_exit();
+	return 0;
+}
+
+int w83627hf_detect(struct i2c_adapter *adapter, int address,
+		   int kind)
+{
+	int val;
+	struct i2c_client *new_client;
+	struct w83627hf_data *data;
+	int err = 0;
+	const char *client_name = "";
+
+	if (!i2c_is_isa_adapter(adapter)) {
+		err = -ENODEV;
+		goto ERROR0;
+	}
+
+	if(force_addr)
+		address = force_addr & ~(WINB_EXTENT - 1);
+
+	if (!request_region(address, WINB_EXTENT, w83627hf_driver.name)) {
+		err = -EBUSY;
+		goto ERROR0;
+	}
+
+	if(force_addr) {
+		printk("w83627hf.o: forcing ISA address 0x%04X\n", address);
+		superio_enter();
+		superio_select(W83627HF_LD_HWM);
+		superio_outb(WINB_BASE_REG, address >> 8);
+		superio_outb(WINB_BASE_REG+1, address & 0xff);
+		superio_exit();
+	}
+
+	superio_enter();
+	val= superio_inb(DEVID);
+	if(val == W627_DEVID)
+		kind = w83627hf;
+	else if(val == W697_DEVID)
+		kind = w83697hf;
+	else if(val == W627THF_DEVID)
+		kind = w83627thf;
+	else if(val == W637_DEVID)
+		kind = w83637hf;
+	else {
+		dev_info(&adapter->dev,
+			 "Unsupported chip (dev_id=0x%02X).\n", val);
+		goto ERROR1;
+	}
+
+	superio_select(W83627HF_LD_HWM);
+	if((val = 0x01 & superio_inb(WINB_ACT_REG)) == 0)
+		superio_outb(WINB_ACT_REG, 1);
+	superio_exit();
+
+	/* OK. For now, we presume we have a valid client. We now create the
+	   client structure, even though we cannot fill it completely yet.
+	   But it allows us to access w83627hf_{read,write}_value. */
+
+	if (!(data = kmalloc(sizeof(struct w83627hf_data), GFP_KERNEL))) {
+		err = -ENOMEM;
+		goto ERROR1;
+	}
+	memset(data, 0, sizeof(struct w83627hf_data));
+
+	new_client = &data->client;
+	i2c_set_clientdata(new_client, data);
+	new_client->addr = address;
+	init_MUTEX(&data->lock);
+	new_client->adapter = adapter;
+	new_client->driver = &w83627hf_driver;
+	new_client->flags = 0;
+
+
+	if (kind == w83627hf) {
+		client_name = "w83627hf";
+	} else if (kind == w83627thf) {
+		client_name = "w83627thf";
+	} else if (kind == w83697hf) {
+		client_name = "w83697hf";
+	} else if (kind == w83637hf) {
+		client_name = "w83637hf";
+	}
+
+	/* Fill in the remaining client fields and put into the global list */
+	strlcpy(new_client->name, client_name, I2C_NAME_SIZE);
+	data->type = kind;
+	data->valid = 0;
+	init_MUTEX(&data->update_lock);
+
+	/* Tell the I2C layer a new client has arrived */
+	if ((err = i2c_attach_client(new_client)))
+		goto ERROR2;
+
+	data->lm75 = NULL;
+
+	/* Initialize the chip */
+	w83627hf_init_client(new_client);
+
+	/* A few vars need to be filled upon startup */
+	data->fan_min[0] = w83627hf_read_value(new_client, W83781D_REG_FAN_MIN(1));
+	data->fan_min[1] = w83627hf_read_value(new_client, W83781D_REG_FAN_MIN(2));
+	data->fan_min[2] = w83627hf_read_value(new_client, W83781D_REG_FAN_MIN(3));
+
+	/* Register sysfs hooks */
+	device_create_file_in(new_client, 0);
+	if (kind != w83697hf)
+		device_create_file_in(new_client, 1);
+	device_create_file_in(new_client, 2);
+	device_create_file_in(new_client, 3);
+	device_create_file_in(new_client, 4);
+	if (kind != w83627thf && kind != w83637hf) {
+		device_create_file_in(new_client, 5);
+		device_create_file_in(new_client, 6);
+	}
+	device_create_file_in(new_client, 7);
+	device_create_file_in(new_client, 8);
+
+	device_create_file_fan(new_client, 1);
+	device_create_file_fan(new_client, 2);
+	if (kind != w83697hf)
+		device_create_file_fan(new_client, 3);
+
+	device_create_file_temp(new_client, 1);
+	device_create_file_temp(new_client, 2);
+	if (kind != w83697hf)
+		device_create_file_temp(new_client, 3);
+
+	if (kind != w83697hf)
+		device_create_file_vid(new_client);
+
+	if (kind != w83697hf)
+		device_create_file_vrm(new_client);
+
+	device_create_file_fan_div(new_client, 1);
+	device_create_file_fan_div(new_client, 2);
+	if (kind != w83697hf)
+		device_create_file_fan_div(new_client, 3);
+
+	device_create_file_alarms(new_client);
+
+	device_create_file_beep(new_client);
+
+	device_create_file_pwm(new_client, 1);
+	device_create_file_pwm(new_client, 2);
+	if (kind == w83627thf || kind == w83637hf)
+		device_create_file_pwm(new_client, 3);
+
+	device_create_file_sensor(new_client, 1);
+	device_create_file_sensor(new_client, 2);
+	if (kind != w83697hf)
+		device_create_file_sensor(new_client, 3);
+
+	return 0;
+
+      ERROR2:
+	kfree(data);
+      ERROR1:
+	release_region(address, WINB_EXTENT);
+      ERROR0:
+	return err;
+}
+
+static int w83627hf_detach_client(struct i2c_client *client)
+{
+	int err;
+
+	if ((err = i2c_detach_client(client))) {
+		dev_err(&client->dev,
+		       "Client deregistration failed, client not detached.\n");
+		return err;
+	}
+
+	release_region(client->addr, WINB_EXTENT);
+	kfree(i2c_get_clientdata(client));
+
+	return 0;
+}
+
+
+/*
+   ISA access must always be locked explicitly!
+   We ignore the W83781D BUSY flag at this moment - it could lead to deadlocks,
+   would slow down the W83781D access and should not be necessary.
+   There are some ugly typecasts here, but the good news is - they should
+   nowhere else be necessary! */
+static int w83627hf_read_value(struct i2c_client *client, u16 reg)
+{
+	struct w83627hf_data *data = i2c_get_clientdata(client);
+	int res, word_sized;
+
+	down(&data->lock);
+	word_sized = (((reg & 0xff00) == 0x100)
+		   || ((reg & 0xff00) == 0x200))
+		  && (((reg & 0x00ff) == 0x50)
+		   || ((reg & 0x00ff) == 0x53)
+		   || ((reg & 0x00ff) == 0x55));
+	if (reg & 0xff00) {
+		outb_p(W83781D_REG_BANK,
+		       client->addr + W83781D_ADDR_REG_OFFSET);
+		outb_p(reg >> 8,
+		       client->addr + W83781D_DATA_REG_OFFSET);
+	}
+	outb_p(reg & 0xff, client->addr + W83781D_ADDR_REG_OFFSET);
+	res = inb_p(client->addr + W83781D_DATA_REG_OFFSET);
+	if (word_sized) {
+		outb_p((reg & 0xff) + 1,
+		       client->addr + W83781D_ADDR_REG_OFFSET);
+		res =
+		    (res << 8) + inb_p(client->addr +
+				       W83781D_DATA_REG_OFFSET);
+	}
+	if (reg & 0xff00) {
+		outb_p(W83781D_REG_BANK,
+		       client->addr + W83781D_ADDR_REG_OFFSET);
+		outb_p(0, client->addr + W83781D_DATA_REG_OFFSET);
+	}
+	up(&data->lock);
+	return res;
+}
+
+static int w83627thf_read_gpio5(struct i2c_client *client)
+{
+	int res = 0xff, sel;
+
+	superio_enter();
+	superio_select(W83627HF_LD_GPIO5);
+
+	/* Make sure these GPIO pins are enabled */
+	if (!(superio_inb(W83627THF_GPIO5_EN) & (1<<3))) {
+		dev_dbg(&client->dev, "GPIO5 disabled, no VID function\n");
+		goto exit;
+	}
+
+	/* Make sure the pins are configured for input
+	   There must be at least five (VRM 9), and possibly 6 (VRM 10) */
+	sel = superio_inb(W83627THF_GPIO5_IOSR);
+	if ((sel & 0x1f) != 0x1f) {
+		dev_dbg(&client->dev, "GPIO5 not configured for VID "
+			"function\n");
+		goto exit;
+	}
+
+	dev_info(&client->dev, "Reading VID from GPIO5\n");
+	res = superio_inb(W83627THF_GPIO5_DR) & sel;
+
+exit:
+	superio_exit();
+	return res;
+}
+
+static int w83627hf_write_value(struct i2c_client *client, u16 reg, u16 value)
+{
+	struct w83627hf_data *data = i2c_get_clientdata(client);
+	int word_sized;
+
+	down(&data->lock);
+	word_sized = (((reg & 0xff00) == 0x100)
+		   || ((reg & 0xff00) == 0x200))
+		  && (((reg & 0x00ff) == 0x53)
+		   || ((reg & 0x00ff) == 0x55));
+	if (reg & 0xff00) {
+		outb_p(W83781D_REG_BANK,
+		       client->addr + W83781D_ADDR_REG_OFFSET);
+		outb_p(reg >> 8,
+		       client->addr + W83781D_DATA_REG_OFFSET);
+	}
+	outb_p(reg & 0xff, client->addr + W83781D_ADDR_REG_OFFSET);
+	if (word_sized) {
+		outb_p(value >> 8,
+		       client->addr + W83781D_DATA_REG_OFFSET);
+		outb_p((reg & 0xff) + 1,
+		       client->addr + W83781D_ADDR_REG_OFFSET);
+	}
+	outb_p(value & 0xff,
+	       client->addr + W83781D_DATA_REG_OFFSET);
+	if (reg & 0xff00) {
+		outb_p(W83781D_REG_BANK,
+		       client->addr + W83781D_ADDR_REG_OFFSET);
+		outb_p(0, client->addr + W83781D_DATA_REG_OFFSET);
+	}
+	up(&data->lock);
+	return 0;
+}
+
+/* Called when we have found a new W83781D. It should set limits, etc. */
+static void w83627hf_init_client(struct i2c_client *client)
+{
+	struct w83627hf_data *data = i2c_get_clientdata(client);
+	int i;
+	int type = data->type;
+	u8 tmp;
+
+	if(init) {
+		/* save this register */
+		i = w83627hf_read_value(client, W83781D_REG_BEEP_CONFIG);
+		/* Reset all except Watchdog values and last conversion values
+		   This sets fan-divs to 2, among others */
+		w83627hf_write_value(client, W83781D_REG_CONFIG, 0x80);
+		/* Restore the register and disable power-on abnormal beep.
+		   This saves FAN 1/2/3 input/output values set by BIOS. */
+		w83627hf_write_value(client, W83781D_REG_BEEP_CONFIG, i | 0x80);
+		/* Disable master beep-enable (reset turns it on).
+		   Individual beeps should be reset to off but for some reason
+		   disabling this bit helps some people not get beeped */
+		w83627hf_write_value(client, W83781D_REG_BEEP_INTS2, 0);
+	}
+
+	/* Minimize conflicts with other winbond i2c-only clients...  */
+	/* disable i2c subclients... how to disable main i2c client?? */
+	/* force i2c address to relatively uncommon address */
+	w83627hf_write_value(client, W83781D_REG_I2C_SUBADDR, 0x89);
+	w83627hf_write_value(client, W83781D_REG_I2C_ADDR, force_i2c);
+
+	/* Read VID only once */
+	if (w83627hf == data->type || w83637hf == data->type) {
+		int lo = w83627hf_read_value(client, W83781D_REG_VID_FANDIV);
+		int hi = w83627hf_read_value(client, W83781D_REG_CHIPID);
+		data->vid = (lo & 0x0f) | ((hi & 0x01) << 4);
+	} else if (w83627thf == data->type) {
+		data->vid = w83627thf_read_gpio5(client) & 0x3f;
+	}
+
+	/* Read VRM & OVT Config only once */
+	if (w83627thf == data->type || w83637hf == data->type) {
+		data->vrm_ovt = 
+			w83627hf_read_value(client, W83627THF_REG_VRM_OVT_CFG);
+		data->vrm = (data->vrm_ovt & 0x01) ? 90 : 82;
+	} else {
+		/* Convert VID to voltage based on default VRM */
+		data->vrm = i2c_which_vrm();
+	}
+
+	tmp = w83627hf_read_value(client, W83781D_REG_SCFG1);
+	for (i = 1; i <= 3; i++) {
+		if (!(tmp & BIT_SCFG1[i - 1])) {
+			data->sens[i - 1] = W83781D_DEFAULT_BETA;
+		} else {
+			if (w83627hf_read_value
+			    (client,
+			     W83781D_REG_SCFG2) & BIT_SCFG2[i - 1])
+				data->sens[i - 1] = 1;
+			else
+				data->sens[i - 1] = 2;
+		}
+		if ((type == w83697hf) && (i == 2))
+			break;
+	}
+
+	if(init) {
+		/* Enable temp2 */
+		tmp = w83627hf_read_value(client, W83781D_REG_TEMP2_CONFIG);
+		if (tmp & 0x01) {
+			dev_warn(&client->dev, "Enabling temp2, readings "
+				 "might not make sense\n");
+			w83627hf_write_value(client, W83781D_REG_TEMP2_CONFIG,
+				tmp & 0xfe);
+		}
+
+		/* Enable temp3 */
+		if (type != w83697hf) {
+			tmp = w83627hf_read_value(client,
+				W83781D_REG_TEMP3_CONFIG);
+			if (tmp & 0x01) {
+				dev_warn(&client->dev, "Enabling temp3, "
+					 "readings might not make sense\n");
+				w83627hf_write_value(client,
+					W83781D_REG_TEMP3_CONFIG, tmp & 0xfe);
+			}
+		}
+
+		if (type == w83627hf) {
+			/* enable PWM2 control (can't hurt since PWM reg
+		           should have been reset to 0xff) */
+			w83627hf_write_value(client, W83627HF_REG_PWMCLK12,
+					    0x19);
+		}
+		/* enable comparator mode for temp2 and temp3 so
+	           alarm indication will work correctly */
+		i = w83627hf_read_value(client, W83781D_REG_IRQ);
+		if (!(i & 0x40))
+			w83627hf_write_value(client, W83781D_REG_IRQ,
+					    i | 0x40);
+	}
+
+	/* Start monitoring */
+	w83627hf_write_value(client, W83781D_REG_CONFIG,
+			    (w83627hf_read_value(client,
+						W83781D_REG_CONFIG) & 0xf7)
+			    | 0x01);
+}
+
+static struct w83627hf_data *w83627hf_update_device(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct w83627hf_data *data = i2c_get_clientdata(client);
+	int i;
+
+	down(&data->update_lock);
+
+	if (time_after(jiffies, data->last_updated + HZ + HZ / 2)
+	    || !data->valid) {
+		for (i = 0; i <= 8; i++) {
+			/* skip missing sensors */
+			if (((data->type == w83697hf) && (i == 1)) ||
+			    ((data->type == w83627thf || data->type == w83637hf)
+			    && (i == 4 || i == 5)))
+				continue;
+			data->in[i] =
+			    w83627hf_read_value(client, W83781D_REG_IN(i));
+			data->in_min[i] =
+			    w83627hf_read_value(client,
+					       W83781D_REG_IN_MIN(i));
+			data->in_max[i] =
+			    w83627hf_read_value(client,
+					       W83781D_REG_IN_MAX(i));
+		}
+		for (i = 1; i <= 3; i++) {
+			data->fan[i - 1] =
+			    w83627hf_read_value(client, W83781D_REG_FAN(i));
+			data->fan_min[i - 1] =
+			    w83627hf_read_value(client,
+					       W83781D_REG_FAN_MIN(i));
+		}
+		for (i = 1; i <= 3; i++) {
+			u8 tmp = w83627hf_read_value(client,
+				W836X7HF_REG_PWM(data->type, i));
+ 			/* bits 0-3 are reserved  in 627THF */
+ 			if (data->type == w83627thf)
+				tmp &= 0xf0;
+			data->pwm[i - 1] = tmp;
+			if(i == 2 &&
+			   (data->type == w83627hf || data->type == w83697hf))
+				break;
+		}
+
+		data->temp = w83627hf_read_value(client, W83781D_REG_TEMP(1));
+		data->temp_max =
+		    w83627hf_read_value(client, W83781D_REG_TEMP_OVER(1));
+		data->temp_max_hyst =
+		    w83627hf_read_value(client, W83781D_REG_TEMP_HYST(1));
+		data->temp_add[0] =
+		    w83627hf_read_value(client, W83781D_REG_TEMP(2));
+		data->temp_max_add[0] =
+		    w83627hf_read_value(client, W83781D_REG_TEMP_OVER(2));
+		data->temp_max_hyst_add[0] =
+		    w83627hf_read_value(client, W83781D_REG_TEMP_HYST(2));
+		if (data->type != w83697hf) {
+			data->temp_add[1] =
+			  w83627hf_read_value(client, W83781D_REG_TEMP(3));
+			data->temp_max_add[1] =
+			  w83627hf_read_value(client, W83781D_REG_TEMP_OVER(3));
+			data->temp_max_hyst_add[1] =
+			  w83627hf_read_value(client, W83781D_REG_TEMP_HYST(3));
+		}
+
+		i = w83627hf_read_value(client, W83781D_REG_VID_FANDIV);
+		data->fan_div[0] = (i >> 4) & 0x03;
+		data->fan_div[1] = (i >> 6) & 0x03;
+		if (data->type != w83697hf) {
+			data->fan_div[2] = (w83627hf_read_value(client,
+					       W83781D_REG_PIN) >> 6) & 0x03;
+		}
+		i = w83627hf_read_value(client, W83781D_REG_VBAT);
+		data->fan_div[0] |= (i >> 3) & 0x04;
+		data->fan_div[1] |= (i >> 4) & 0x04;
+		if (data->type != w83697hf)
+			data->fan_div[2] |= (i >> 5) & 0x04;
+		data->alarms =
+		    w83627hf_read_value(client, W83781D_REG_ALARM1) |
+		    (w83627hf_read_value(client, W83781D_REG_ALARM2) << 8) |
+		    (w83627hf_read_value(client, W83781D_REG_ALARM3) << 16);
+		i = w83627hf_read_value(client, W83781D_REG_BEEP_INTS2);
+		data->beep_enable = i >> 7;
+		data->beep_mask = ((i & 0x7f) << 8) |
+		    w83627hf_read_value(client, W83781D_REG_BEEP_INTS1) |
+		    w83627hf_read_value(client, W83781D_REG_BEEP_INTS3) << 16;
+		data->last_updated = jiffies;
+		data->valid = 1;
+	}
+
+	up(&data->update_lock);
+
+	return data;
+}
+
+static int __init sensors_w83627hf_init(void)
+{
+	int addr;
+
+	if (w83627hf_find(0x2e, &addr)
+	 && w83627hf_find(0x4e, &addr)) {
+		return -ENODEV;
+	}
+	normal_isa[0] = addr;
+
+	return i2c_add_driver(&w83627hf_driver);
+}
+
+static void __exit sensors_w83627hf_exit(void)
+{
+	i2c_del_driver(&w83627hf_driver);
+}
+
+MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl>, "
+	      "Philip Edelbrock <phil@netroedge.com>, "
+	      "and Mark Studebaker <mdsxyz123@yahoo.com>");
+MODULE_DESCRIPTION("W83627HF driver");
+MODULE_LICENSE("GPL");
+
+module_init(sensors_w83627hf_init);
+module_exit(sensors_w83627hf_exit);
diff --git a/drivers/i2c/chips/w83781d.c b/drivers/i2c/chips/w83781d.c
new file mode 100644
index 00000000000..4954e465c41
--- /dev/null
+++ b/drivers/i2c/chips/w83781d.c
@@ -0,0 +1,1664 @@
+/*
+    w83781d.c - Part of lm_sensors, Linux kernel modules for hardware
+                monitoring
+    Copyright (c) 1998 - 2001  Frodo Looijaard <frodol@dds.nl>,
+    Philip Edelbrock <phil@netroedge.com>,
+    and Mark Studebaker <mdsxyz123@yahoo.com>
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+/*
+    Supports following chips:
+
+    Chip	#vin	#fanin	#pwm	#temp	wchipid	vendid	i2c	ISA
+    as99127f	7	3	0	3	0x31	0x12c3	yes	no
+    as99127f rev.2 (type_name = as99127f)	0x31	0x5ca3	yes	no
+    w83781d	7	3	0	3	0x10-1	0x5ca3	yes	yes
+    w83627hf	9	3	2	3	0x21	0x5ca3	yes	yes(LPC)
+    w83627thf	9	3	2	3	0x90	0x5ca3	no	yes(LPC)
+    w83782d	9	3	2-4	3	0x30	0x5ca3	yes	yes
+    w83783s	5-6	3	2	1-2	0x40	0x5ca3	yes	no
+    w83697hf	8	2	2	2	0x60	0x5ca3	no	yes(LPC)
+
+*/
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/jiffies.h>
+#include <linux/i2c.h>
+#include <linux/i2c-sensor.h>
+#include <linux/i2c-vid.h>
+#include <asm/io.h>
+#include "lm75.h"
+
+/* Addresses to scan */
+static unsigned short normal_i2c[] = { 0x20, 0x21, 0x22, 0x23, 0x24, 0x25,
+					0x26, 0x27, 0x28, 0x29, 0x2a, 0x2b,
+					0x2c, 0x2d, 0x2e, 0x2f, I2C_CLIENT_END };
+static unsigned int normal_isa[] = { 0x0290, I2C_CLIENT_ISA_END };
+
+/* Insmod parameters */
+SENSORS_INSMOD_6(w83781d, w83782d, w83783s, w83627hf, as99127f, w83697hf);
+I2C_CLIENT_MODULE_PARM(force_subclients, "List of subclient addresses: "
+		    "{bus, clientaddr, subclientaddr1, subclientaddr2}");
+
+static int init = 1;
+module_param(init, bool, 0);
+MODULE_PARM_DESC(init, "Set to zero to bypass chip initialization");
+
+/* Constants specified below */
+
+/* Length of ISA address segment */
+#define W83781D_EXTENT			8
+
+/* Where are the ISA address/data registers relative to the base address */
+#define W83781D_ADDR_REG_OFFSET		5
+#define W83781D_DATA_REG_OFFSET		6
+
+/* The W83781D registers */
+/* The W83782D registers for nr=7,8 are in bank 5 */
+#define W83781D_REG_IN_MAX(nr)		((nr < 7) ? (0x2b + (nr) * 2) : \
+						    (0x554 + (((nr) - 7) * 2)))
+#define W83781D_REG_IN_MIN(nr)		((nr < 7) ? (0x2c + (nr) * 2) : \
+						    (0x555 + (((nr) - 7) * 2)))
+#define W83781D_REG_IN(nr)		((nr < 7) ? (0x20 + (nr)) : \
+						    (0x550 + (nr) - 7))
+
+#define W83781D_REG_FAN_MIN(nr)		(0x3a + (nr))
+#define W83781D_REG_FAN(nr)		(0x27 + (nr))
+
+#define W83781D_REG_BANK		0x4E
+#define W83781D_REG_TEMP2_CONFIG	0x152
+#define W83781D_REG_TEMP3_CONFIG	0x252
+#define W83781D_REG_TEMP(nr)		((nr == 3) ? (0x0250) : \
+					((nr == 2) ? (0x0150) : \
+						     (0x27)))
+#define W83781D_REG_TEMP_HYST(nr)	((nr == 3) ? (0x253) : \
+					((nr == 2) ? (0x153) : \
+						     (0x3A)))
+#define W83781D_REG_TEMP_OVER(nr)	((nr == 3) ? (0x255) : \
+					((nr == 2) ? (0x155) : \
+						     (0x39)))
+
+#define W83781D_REG_CONFIG		0x40
+#define W83781D_REG_ALARM1		0x41
+#define W83781D_REG_ALARM2		0x42
+#define W83781D_REG_ALARM3		0x450	/* not on W83781D */
+
+#define W83781D_REG_IRQ			0x4C
+#define W83781D_REG_BEEP_CONFIG		0x4D
+#define W83781D_REG_BEEP_INTS1		0x56
+#define W83781D_REG_BEEP_INTS2		0x57
+#define W83781D_REG_BEEP_INTS3		0x453	/* not on W83781D */
+
+#define W83781D_REG_VID_FANDIV		0x47
+
+#define W83781D_REG_CHIPID		0x49
+#define W83781D_REG_WCHIPID		0x58
+#define W83781D_REG_CHIPMAN		0x4F
+#define W83781D_REG_PIN			0x4B
+
+/* 782D/783S only */
+#define W83781D_REG_VBAT		0x5D
+
+/* PWM 782D (1-4) and 783S (1-2) only */
+#define W83781D_REG_PWM1		0x5B	/* 782d and 783s/627hf datasheets disagree */
+						/* on which is which; */
+#define W83781D_REG_PWM2		0x5A	/* We follow the 782d convention here, */
+						/* However 782d is probably wrong. */
+#define W83781D_REG_PWM3		0x5E
+#define W83781D_REG_PWM4		0x5F
+#define W83781D_REG_PWMCLK12		0x5C
+#define W83781D_REG_PWMCLK34		0x45C
+static const u8 regpwm[] = { W83781D_REG_PWM1, W83781D_REG_PWM2,
+	W83781D_REG_PWM3, W83781D_REG_PWM4
+};
+
+#define W83781D_REG_PWM(nr)		(regpwm[(nr) - 1])
+
+#define W83781D_REG_I2C_ADDR		0x48
+#define W83781D_REG_I2C_SUBADDR		0x4A
+
+/* The following are undocumented in the data sheets however we
+   received the information in an email from Winbond tech support */
+/* Sensor selection - not on 781d */
+#define W83781D_REG_SCFG1		0x5D
+static const u8 BIT_SCFG1[] = { 0x02, 0x04, 0x08 };
+
+#define W83781D_REG_SCFG2		0x59
+static const u8 BIT_SCFG2[] = { 0x10, 0x20, 0x40 };
+
+#define W83781D_DEFAULT_BETA		3435
+
+/* RT Table registers */
+#define W83781D_REG_RT_IDX		0x50
+#define W83781D_REG_RT_VAL		0x51
+
+/* Conversions. Rounding and limit checking is only done on the TO_REG
+   variants. Note that you should be a bit careful with which arguments
+   these macros are called: arguments may be evaluated more than once.
+   Fixing this is just not worth it. */
+#define IN_TO_REG(val)			(SENSORS_LIMIT((((val) * 10 + 8)/16),0,255))
+#define IN_FROM_REG(val)		(((val) * 16) / 10)
+
+static inline u8
+FAN_TO_REG(long rpm, int div)
+{
+	if (rpm == 0)
+		return 255;
+	rpm = SENSORS_LIMIT(rpm, 1, 1000000);
+	return SENSORS_LIMIT((1350000 + rpm * div / 2) / (rpm * div), 1, 254);
+}
+
+#define FAN_FROM_REG(val,div)		((val) == 0   ? -1 : \
+					((val) == 255 ? 0 : \
+							1350000 / ((val) * (div))))
+
+#define TEMP_TO_REG(val)		(SENSORS_LIMIT(((val) < 0 ? (val)+0x100*1000 \
+						: (val)) / 1000, 0, 0xff))
+#define TEMP_FROM_REG(val)		(((val) & 0x80 ? (val)-0x100 : (val)) * 1000)
+
+#define ALARMS_FROM_REG(val)		(val)
+#define PWM_FROM_REG(val)		(val)
+#define PWM_TO_REG(val)			(SENSORS_LIMIT((val),0,255))
+#define BEEP_MASK_FROM_REG(val,type)	((type) == as99127f ? \
+					 (val) ^ 0x7fff : (val))
+#define BEEP_MASK_TO_REG(val,type)	((type) == as99127f ? \
+					 (~(val)) & 0x7fff : (val) & 0xffffff)
+
+#define BEEP_ENABLE_TO_REG(val)		((val) ? 1 : 0)
+#define BEEP_ENABLE_FROM_REG(val)	((val) ? 1 : 0)
+
+#define DIV_FROM_REG(val)		(1 << (val))
+
+static inline u8
+DIV_TO_REG(long val, enum chips type)
+{
+	int i;
+	val = SENSORS_LIMIT(val, 1,
+			    ((type == w83781d
+			      || type == as99127f) ? 8 : 128)) >> 1;
+	for (i = 0; i < 6; i++) {
+		if (val == 0)
+			break;
+		val >>= 1;
+	}
+	return ((u8) i);
+}
+
+/* There are some complications in a module like this. First off, W83781D chips
+   may be both present on the SMBus and the ISA bus, and we have to handle
+   those cases separately at some places. Second, there might be several
+   W83781D chips available (well, actually, that is probably never done; but
+   it is a clean illustration of how to handle a case like that). Finally,
+   a specific chip may be attached to *both* ISA and SMBus, and we would
+   not like to detect it double. Fortunately, in the case of the W83781D at
+   least, a register tells us what SMBus address we are on, so that helps
+   a bit - except if there could be more than one SMBus. Groan. No solution
+   for this yet. */
+
+/* This module may seem overly long and complicated. In fact, it is not so
+   bad. Quite a lot of bookkeeping is done. A real driver can often cut
+   some corners. */
+
+/* For each registered W83781D, we need to keep some data in memory. That
+   data is pointed to by w83781d_list[NR]->data. The structure itself is
+   dynamically allocated, at the same time when a new w83781d client is
+   allocated. */
+struct w83781d_data {
+	struct i2c_client client;
+	struct semaphore lock;
+	enum chips type;
+
+	struct semaphore update_lock;
+	char valid;		/* !=0 if following fields are valid */
+	unsigned long last_updated;	/* In jiffies */
+
+	struct i2c_client *lm75[2];	/* for secondary I2C addresses */
+	/* array of 2 pointers to subclients */
+
+	u8 in[9];		/* Register value - 8 & 9 for 782D only */
+	u8 in_max[9];		/* Register value - 8 & 9 for 782D only */
+	u8 in_min[9];		/* Register value - 8 & 9 for 782D only */
+	u8 fan[3];		/* Register value */
+	u8 fan_min[3];		/* Register value */
+	u8 temp;
+	u8 temp_max;		/* Register value */
+	u8 temp_max_hyst;	/* Register value */
+	u16 temp_add[2];	/* Register value */
+	u16 temp_max_add[2];	/* Register value */
+	u16 temp_max_hyst_add[2];	/* Register value */
+	u8 fan_div[3];		/* Register encoding, shifted right */
+	u8 vid;			/* Register encoding, combined */
+	u32 alarms;		/* Register encoding, combined */
+	u32 beep_mask;		/* Register encoding, combined */
+	u8 beep_enable;		/* Boolean */
+	u8 pwm[4];		/* Register value */
+	u8 pwmenable[4];	/* Boolean */
+	u16 sens[3];		/* 782D/783S only.
+				   1 = pentium diode; 2 = 3904 diode;
+				   3000-5000 = thermistor beta.
+				   Default = 3435. 
+				   Other Betas unimplemented */
+	u8 vrm;
+};
+
+static int w83781d_attach_adapter(struct i2c_adapter *adapter);
+static int w83781d_detect(struct i2c_adapter *adapter, int address, int kind);
+static int w83781d_detach_client(struct i2c_client *client);
+
+static int w83781d_read_value(struct i2c_client *client, u16 register);
+static int w83781d_write_value(struct i2c_client *client, u16 register,
+			       u16 value);
+static struct w83781d_data *w83781d_update_device(struct device *dev);
+static void w83781d_init_client(struct i2c_client *client);
+
+static struct i2c_driver w83781d_driver = {
+	.owner = THIS_MODULE,
+	.name = "w83781d",
+	.id = I2C_DRIVERID_W83781D,
+	.flags = I2C_DF_NOTIFY,
+	.attach_adapter = w83781d_attach_adapter,
+	.detach_client = w83781d_detach_client,
+};
+
+/* following are the sysfs callback functions */
+#define show_in_reg(reg) \
+static ssize_t show_##reg (struct device *dev, char *buf, int nr) \
+{ \
+	struct w83781d_data *data = w83781d_update_device(dev); \
+	return sprintf(buf,"%ld\n", (long)IN_FROM_REG(data->reg[nr] * 10)); \
+}
+show_in_reg(in);
+show_in_reg(in_min);
+show_in_reg(in_max);
+
+#define store_in_reg(REG, reg) \
+static ssize_t store_in_##reg (struct device *dev, const char *buf, size_t count, int nr) \
+{ \
+	struct i2c_client *client = to_i2c_client(dev); \
+	struct w83781d_data *data = i2c_get_clientdata(client); \
+	u32 val; \
+	 \
+	val = simple_strtoul(buf, NULL, 10) / 10; \
+	 \
+	down(&data->update_lock); \
+	data->in_##reg[nr] = IN_TO_REG(val); \
+	w83781d_write_value(client, W83781D_REG_IN_##REG(nr), data->in_##reg[nr]); \
+	 \
+	up(&data->update_lock); \
+	return count; \
+}
+store_in_reg(MIN, min);
+store_in_reg(MAX, max);
+
+#define sysfs_in_offset(offset) \
+static ssize_t \
+show_regs_in_##offset (struct device *dev, char *buf) \
+{ \
+        return show_in(dev, buf, offset); \
+} \
+static DEVICE_ATTR(in##offset##_input, S_IRUGO, show_regs_in_##offset, NULL);
+
+#define sysfs_in_reg_offset(reg, offset) \
+static ssize_t show_regs_in_##reg##offset (struct device *dev, char *buf) \
+{ \
+	return show_in_##reg (dev, buf, offset); \
+} \
+static ssize_t store_regs_in_##reg##offset (struct device *dev, const char *buf, size_t count) \
+{ \
+	return store_in_##reg (dev, buf, count, offset); \
+} \
+static DEVICE_ATTR(in##offset##_##reg, S_IRUGO| S_IWUSR, show_regs_in_##reg##offset, store_regs_in_##reg##offset);
+
+#define sysfs_in_offsets(offset) \
+sysfs_in_offset(offset); \
+sysfs_in_reg_offset(min, offset); \
+sysfs_in_reg_offset(max, offset);
+
+sysfs_in_offsets(0);
+sysfs_in_offsets(1);
+sysfs_in_offsets(2);
+sysfs_in_offsets(3);
+sysfs_in_offsets(4);
+sysfs_in_offsets(5);
+sysfs_in_offsets(6);
+sysfs_in_offsets(7);
+sysfs_in_offsets(8);
+
+#define device_create_file_in(client, offset) \
+do { \
+device_create_file(&client->dev, &dev_attr_in##offset##_input); \
+device_create_file(&client->dev, &dev_attr_in##offset##_min); \
+device_create_file(&client->dev, &dev_attr_in##offset##_max); \
+} while (0)
+
+#define show_fan_reg(reg) \
+static ssize_t show_##reg (struct device *dev, char *buf, int nr) \
+{ \
+	struct w83781d_data *data = w83781d_update_device(dev); \
+	return sprintf(buf,"%ld\n", \
+		FAN_FROM_REG(data->reg[nr-1], (long)DIV_FROM_REG(data->fan_div[nr-1]))); \
+}
+show_fan_reg(fan);
+show_fan_reg(fan_min);
+
+static ssize_t
+store_fan_min(struct device *dev, const char *buf, size_t count, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct w83781d_data *data = i2c_get_clientdata(client);
+	u32 val;
+
+	val = simple_strtoul(buf, NULL, 10);
+
+	down(&data->update_lock);
+	data->fan_min[nr - 1] =
+	    FAN_TO_REG(val, DIV_FROM_REG(data->fan_div[nr - 1]));
+	w83781d_write_value(client, W83781D_REG_FAN_MIN(nr),
+			    data->fan_min[nr - 1]);
+
+	up(&data->update_lock);
+	return count;
+}
+
+#define sysfs_fan_offset(offset) \
+static ssize_t show_regs_fan_##offset (struct device *dev, char *buf) \
+{ \
+	return show_fan(dev, buf, offset); \
+} \
+static DEVICE_ATTR(fan##offset##_input, S_IRUGO, show_regs_fan_##offset, NULL);
+
+#define sysfs_fan_min_offset(offset) \
+static ssize_t show_regs_fan_min##offset (struct device *dev, char *buf) \
+{ \
+	return show_fan_min(dev, buf, offset); \
+} \
+static ssize_t store_regs_fan_min##offset (struct device *dev, const char *buf, size_t count) \
+{ \
+	return store_fan_min(dev, buf, count, offset); \
+} \
+static DEVICE_ATTR(fan##offset##_min, S_IRUGO | S_IWUSR, show_regs_fan_min##offset, store_regs_fan_min##offset);
+
+sysfs_fan_offset(1);
+sysfs_fan_min_offset(1);
+sysfs_fan_offset(2);
+sysfs_fan_min_offset(2);
+sysfs_fan_offset(3);
+sysfs_fan_min_offset(3);
+
+#define device_create_file_fan(client, offset) \
+do { \
+device_create_file(&client->dev, &dev_attr_fan##offset##_input); \
+device_create_file(&client->dev, &dev_attr_fan##offset##_min); \
+} while (0)
+
+#define show_temp_reg(reg) \
+static ssize_t show_##reg (struct device *dev, char *buf, int nr) \
+{ \
+	struct w83781d_data *data = w83781d_update_device(dev); \
+	if (nr >= 2) {	/* TEMP2 and TEMP3 */ \
+		return sprintf(buf,"%d\n", \
+			LM75_TEMP_FROM_REG(data->reg##_add[nr-2])); \
+	} else {	/* TEMP1 */ \
+		return sprintf(buf,"%ld\n", (long)TEMP_FROM_REG(data->reg)); \
+	} \
+}
+show_temp_reg(temp);
+show_temp_reg(temp_max);
+show_temp_reg(temp_max_hyst);
+
+#define store_temp_reg(REG, reg) \
+static ssize_t store_temp_##reg (struct device *dev, const char *buf, size_t count, int nr) \
+{ \
+	struct i2c_client *client = to_i2c_client(dev); \
+	struct w83781d_data *data = i2c_get_clientdata(client); \
+	s32 val; \
+	 \
+	val = simple_strtol(buf, NULL, 10); \
+	 \
+	down(&data->update_lock); \
+	 \
+	if (nr >= 2) {	/* TEMP2 and TEMP3 */ \
+		data->temp_##reg##_add[nr-2] = LM75_TEMP_TO_REG(val); \
+		w83781d_write_value(client, W83781D_REG_TEMP_##REG(nr), \
+				data->temp_##reg##_add[nr-2]); \
+	} else {	/* TEMP1 */ \
+		data->temp_##reg = TEMP_TO_REG(val); \
+		w83781d_write_value(client, W83781D_REG_TEMP_##REG(nr), \
+			data->temp_##reg); \
+	} \
+	 \
+	up(&data->update_lock); \
+	return count; \
+}
+store_temp_reg(OVER, max);
+store_temp_reg(HYST, max_hyst);
+
+#define sysfs_temp_offset(offset) \
+static ssize_t \
+show_regs_temp_##offset (struct device *dev, char *buf) \
+{ \
+	return show_temp(dev, buf, offset); \
+} \
+static DEVICE_ATTR(temp##offset##_input, S_IRUGO, show_regs_temp_##offset, NULL);
+
+#define sysfs_temp_reg_offset(reg, offset) \
+static ssize_t show_regs_temp_##reg##offset (struct device *dev, char *buf) \
+{ \
+	return show_temp_##reg (dev, buf, offset); \
+} \
+static ssize_t store_regs_temp_##reg##offset (struct device *dev, const char *buf, size_t count) \
+{ \
+	return store_temp_##reg (dev, buf, count, offset); \
+} \
+static DEVICE_ATTR(temp##offset##_##reg, S_IRUGO| S_IWUSR, show_regs_temp_##reg##offset, store_regs_temp_##reg##offset);
+
+#define sysfs_temp_offsets(offset) \
+sysfs_temp_offset(offset); \
+sysfs_temp_reg_offset(max, offset); \
+sysfs_temp_reg_offset(max_hyst, offset);
+
+sysfs_temp_offsets(1);
+sysfs_temp_offsets(2);
+sysfs_temp_offsets(3);
+
+#define device_create_file_temp(client, offset) \
+do { \
+device_create_file(&client->dev, &dev_attr_temp##offset##_input); \
+device_create_file(&client->dev, &dev_attr_temp##offset##_max); \
+device_create_file(&client->dev, &dev_attr_temp##offset##_max_hyst); \
+} while (0)
+
+static ssize_t
+show_vid_reg(struct device *dev, char *buf)
+{
+	struct w83781d_data *data = w83781d_update_device(dev);
+	return sprintf(buf, "%ld\n", (long) vid_from_reg(data->vid, data->vrm));
+}
+
+static
+DEVICE_ATTR(cpu0_vid, S_IRUGO, show_vid_reg, NULL);
+#define device_create_file_vid(client) \
+device_create_file(&client->dev, &dev_attr_cpu0_vid);
+static ssize_t
+show_vrm_reg(struct device *dev, char *buf)
+{
+	struct w83781d_data *data = w83781d_update_device(dev);
+	return sprintf(buf, "%ld\n", (long) data->vrm);
+}
+
+static ssize_t
+store_vrm_reg(struct device *dev, const char *buf, size_t count)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct w83781d_data *data = i2c_get_clientdata(client);
+	u32 val;
+
+	val = simple_strtoul(buf, NULL, 10);
+	data->vrm = val;
+
+	return count;
+}
+
+static
+DEVICE_ATTR(vrm, S_IRUGO | S_IWUSR, show_vrm_reg, store_vrm_reg);
+#define device_create_file_vrm(client) \
+device_create_file(&client->dev, &dev_attr_vrm);
+static ssize_t
+show_alarms_reg(struct device *dev, char *buf)
+{
+	struct w83781d_data *data = w83781d_update_device(dev);
+	return sprintf(buf, "%ld\n", (long) ALARMS_FROM_REG(data->alarms));
+}
+
+static
+DEVICE_ATTR(alarms, S_IRUGO, show_alarms_reg, NULL);
+#define device_create_file_alarms(client) \
+device_create_file(&client->dev, &dev_attr_alarms);
+static ssize_t show_beep_mask (struct device *dev, char *buf)
+{
+	struct w83781d_data *data = w83781d_update_device(dev);
+	return sprintf(buf, "%ld\n",
+		       (long)BEEP_MASK_FROM_REG(data->beep_mask, data->type));
+}
+static ssize_t show_beep_enable (struct device *dev, char *buf)
+{
+	struct w83781d_data *data = w83781d_update_device(dev);
+	return sprintf(buf, "%ld\n",
+		       (long)BEEP_ENABLE_FROM_REG(data->beep_enable));
+}
+
+#define BEEP_ENABLE			0	/* Store beep_enable */
+#define BEEP_MASK			1	/* Store beep_mask */
+
+static ssize_t
+store_beep_reg(struct device *dev, const char *buf, size_t count,
+	       int update_mask)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct w83781d_data *data = i2c_get_clientdata(client);
+	u32 val, val2;
+
+	val = simple_strtoul(buf, NULL, 10);
+
+	down(&data->update_lock);
+
+	if (update_mask == BEEP_MASK) {	/* We are storing beep_mask */
+		data->beep_mask = BEEP_MASK_TO_REG(val, data->type);
+		w83781d_write_value(client, W83781D_REG_BEEP_INTS1,
+				    data->beep_mask & 0xff);
+
+		if ((data->type != w83781d) && (data->type != as99127f)) {
+			w83781d_write_value(client, W83781D_REG_BEEP_INTS3,
+					    ((data->beep_mask) >> 16) & 0xff);
+		}
+
+		val2 = (data->beep_mask >> 8) & 0x7f;
+	} else {		/* We are storing beep_enable */
+		val2 = w83781d_read_value(client, W83781D_REG_BEEP_INTS2) & 0x7f;
+		data->beep_enable = BEEP_ENABLE_TO_REG(val);
+	}
+
+	w83781d_write_value(client, W83781D_REG_BEEP_INTS2,
+			    val2 | data->beep_enable << 7);
+
+	up(&data->update_lock);
+	return count;
+}
+
+#define sysfs_beep(REG, reg) \
+static ssize_t show_regs_beep_##reg (struct device *dev, char *buf) \
+{ \
+	return show_beep_##reg(dev, buf); \
+} \
+static ssize_t store_regs_beep_##reg (struct device *dev, const char *buf, size_t count) \
+{ \
+	return store_beep_reg(dev, buf, count, BEEP_##REG); \
+} \
+static DEVICE_ATTR(beep_##reg, S_IRUGO | S_IWUSR, show_regs_beep_##reg, store_regs_beep_##reg);
+
+sysfs_beep(ENABLE, enable);
+sysfs_beep(MASK, mask);
+
+#define device_create_file_beep(client) \
+do { \
+device_create_file(&client->dev, &dev_attr_beep_enable); \
+device_create_file(&client->dev, &dev_attr_beep_mask); \
+} while (0)
+
+static ssize_t
+show_fan_div_reg(struct device *dev, char *buf, int nr)
+{
+	struct w83781d_data *data = w83781d_update_device(dev);
+	return sprintf(buf, "%ld\n",
+		       (long) DIV_FROM_REG(data->fan_div[nr - 1]));
+}
+
+/* Note: we save and restore the fan minimum here, because its value is
+   determined in part by the fan divisor.  This follows the principle of
+   least suprise; the user doesn't expect the fan minimum to change just
+   because the divisor changed. */
+static ssize_t
+store_fan_div_reg(struct device *dev, const char *buf, size_t count, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct w83781d_data *data = i2c_get_clientdata(client);
+	unsigned long min;
+	u8 reg;
+	unsigned long val = simple_strtoul(buf, NULL, 10);
+
+	down(&data->update_lock);
+	
+	/* Save fan_min */
+	min = FAN_FROM_REG(data->fan_min[nr],
+			   DIV_FROM_REG(data->fan_div[nr]));
+
+	data->fan_div[nr] = DIV_TO_REG(val, data->type);
+
+	reg = (w83781d_read_value(client, nr==2 ? W83781D_REG_PIN : W83781D_REG_VID_FANDIV)
+	       & (nr==0 ? 0xcf : 0x3f))
+	    | ((data->fan_div[nr] & 0x03) << (nr==0 ? 4 : 6));
+	w83781d_write_value(client, nr==2 ? W83781D_REG_PIN : W83781D_REG_VID_FANDIV, reg);
+
+	/* w83781d and as99127f don't have extended divisor bits */
+	if (data->type != w83781d && data->type != as99127f) {
+		reg = (w83781d_read_value(client, W83781D_REG_VBAT)
+		       & ~(1 << (5 + nr)))
+		    | ((data->fan_div[nr] & 0x04) << (3 + nr));
+		w83781d_write_value(client, W83781D_REG_VBAT, reg);
+	}
+
+	/* Restore fan_min */
+	data->fan_min[nr] = FAN_TO_REG(min, DIV_FROM_REG(data->fan_div[nr]));
+	w83781d_write_value(client, W83781D_REG_FAN_MIN(nr+1), data->fan_min[nr]);
+
+	up(&data->update_lock);
+	return count;
+}
+
+#define sysfs_fan_div(offset) \
+static ssize_t show_regs_fan_div_##offset (struct device *dev, char *buf) \
+{ \
+	return show_fan_div_reg(dev, buf, offset); \
+} \
+static ssize_t store_regs_fan_div_##offset (struct device *dev, const char *buf, size_t count) \
+{ \
+	return store_fan_div_reg(dev, buf, count, offset - 1); \
+} \
+static DEVICE_ATTR(fan##offset##_div, S_IRUGO | S_IWUSR, show_regs_fan_div_##offset, store_regs_fan_div_##offset);
+
+sysfs_fan_div(1);
+sysfs_fan_div(2);
+sysfs_fan_div(3);
+
+#define device_create_file_fan_div(client, offset) \
+do { \
+device_create_file(&client->dev, &dev_attr_fan##offset##_div); \
+} while (0)
+
+static ssize_t
+show_pwm_reg(struct device *dev, char *buf, int nr)
+{
+	struct w83781d_data *data = w83781d_update_device(dev);
+	return sprintf(buf, "%ld\n", (long) PWM_FROM_REG(data->pwm[nr - 1]));
+}
+
+static ssize_t
+show_pwmenable_reg(struct device *dev, char *buf, int nr)
+{
+	struct w83781d_data *data = w83781d_update_device(dev);
+	return sprintf(buf, "%ld\n", (long) data->pwmenable[nr - 1]);
+}
+
+static ssize_t
+store_pwm_reg(struct device *dev, const char *buf, size_t count, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct w83781d_data *data = i2c_get_clientdata(client);
+	u32 val;
+
+	val = simple_strtoul(buf, NULL, 10);
+
+	down(&data->update_lock);
+	data->pwm[nr - 1] = PWM_TO_REG(val);
+	w83781d_write_value(client, W83781D_REG_PWM(nr), data->pwm[nr - 1]);
+	up(&data->update_lock);
+	return count;
+}
+
+static ssize_t
+store_pwmenable_reg(struct device *dev, const char *buf, size_t count, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct w83781d_data *data = i2c_get_clientdata(client);
+	u32 val, reg;
+
+	val = simple_strtoul(buf, NULL, 10);
+
+	down(&data->update_lock);
+
+	switch (val) {
+	case 0:
+	case 1:
+		reg = w83781d_read_value(client, W83781D_REG_PWMCLK12);
+		w83781d_write_value(client, W83781D_REG_PWMCLK12,
+				    (reg & 0xf7) | (val << 3));
+
+		reg = w83781d_read_value(client, W83781D_REG_BEEP_CONFIG);
+		w83781d_write_value(client, W83781D_REG_BEEP_CONFIG,
+				    (reg & 0xef) | (!val << 4));
+
+		data->pwmenable[nr - 1] = val;
+		break;
+
+	default:
+		up(&data->update_lock);
+		return -EINVAL;
+	}
+
+	up(&data->update_lock);
+	return count;
+}
+
+#define sysfs_pwm(offset) \
+static ssize_t show_regs_pwm_##offset (struct device *dev, char *buf) \
+{ \
+	return show_pwm_reg(dev, buf, offset); \
+} \
+static ssize_t store_regs_pwm_##offset (struct device *dev, \
+		const char *buf, size_t count) \
+{ \
+	return store_pwm_reg(dev, buf, count, offset); \
+} \
+static DEVICE_ATTR(pwm##offset, S_IRUGO | S_IWUSR, \
+		show_regs_pwm_##offset, store_regs_pwm_##offset);
+
+#define sysfs_pwmenable(offset) \
+static ssize_t show_regs_pwmenable_##offset (struct device *dev, char *buf) \
+{ \
+	return show_pwmenable_reg(dev, buf, offset); \
+} \
+static ssize_t store_regs_pwmenable_##offset (struct device *dev, \
+		const char *buf, size_t count) \
+{ \
+	return store_pwmenable_reg(dev, buf, count, offset); \
+} \
+static DEVICE_ATTR(pwm##offset##_enable, S_IRUGO | S_IWUSR, \
+		show_regs_pwmenable_##offset, store_regs_pwmenable_##offset);
+
+sysfs_pwm(1);
+sysfs_pwm(2);
+sysfs_pwmenable(2);		/* only PWM2 can be enabled/disabled */
+sysfs_pwm(3);
+sysfs_pwm(4);
+
+#define device_create_file_pwm(client, offset) \
+do { \
+device_create_file(&client->dev, &dev_attr_pwm##offset); \
+} while (0)
+
+#define device_create_file_pwmenable(client, offset) \
+do { \
+device_create_file(&client->dev, &dev_attr_pwm##offset##_enable); \
+} while (0)
+
+static ssize_t
+show_sensor_reg(struct device *dev, char *buf, int nr)
+{
+	struct w83781d_data *data = w83781d_update_device(dev);
+	return sprintf(buf, "%ld\n", (long) data->sens[nr - 1]);
+}
+
+static ssize_t
+store_sensor_reg(struct device *dev, const char *buf, size_t count, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct w83781d_data *data = i2c_get_clientdata(client);
+	u32 val, tmp;
+
+	val = simple_strtoul(buf, NULL, 10);
+
+	down(&data->update_lock);
+
+	switch (val) {
+	case 1:		/* PII/Celeron diode */
+		tmp = w83781d_read_value(client, W83781D_REG_SCFG1);
+		w83781d_write_value(client, W83781D_REG_SCFG1,
+				    tmp | BIT_SCFG1[nr - 1]);
+		tmp = w83781d_read_value(client, W83781D_REG_SCFG2);
+		w83781d_write_value(client, W83781D_REG_SCFG2,
+				    tmp | BIT_SCFG2[nr - 1]);
+		data->sens[nr - 1] = val;
+		break;
+	case 2:		/* 3904 */
+		tmp = w83781d_read_value(client, W83781D_REG_SCFG1);
+		w83781d_write_value(client, W83781D_REG_SCFG1,
+				    tmp | BIT_SCFG1[nr - 1]);
+		tmp = w83781d_read_value(client, W83781D_REG_SCFG2);
+		w83781d_write_value(client, W83781D_REG_SCFG2,
+				    tmp & ~BIT_SCFG2[nr - 1]);
+		data->sens[nr - 1] = val;
+		break;
+	case W83781D_DEFAULT_BETA:	/* thermistor */
+		tmp = w83781d_read_value(client, W83781D_REG_SCFG1);
+		w83781d_write_value(client, W83781D_REG_SCFG1,
+				    tmp & ~BIT_SCFG1[nr - 1]);
+		data->sens[nr - 1] = val;
+		break;
+	default:
+		dev_err(dev, "Invalid sensor type %ld; must be 1, 2, or %d\n",
+		       (long) val, W83781D_DEFAULT_BETA);
+		break;
+	}
+
+	up(&data->update_lock);
+	return count;
+}
+
+#define sysfs_sensor(offset) \
+static ssize_t show_regs_sensor_##offset (struct device *dev, char *buf) \
+{ \
+    return show_sensor_reg(dev, buf, offset); \
+} \
+static ssize_t store_regs_sensor_##offset (struct device *dev, const char *buf, size_t count) \
+{ \
+    return store_sensor_reg(dev, buf, count, offset); \
+} \
+static DEVICE_ATTR(temp##offset##_type, S_IRUGO | S_IWUSR, show_regs_sensor_##offset, store_regs_sensor_##offset);
+
+sysfs_sensor(1);
+sysfs_sensor(2);
+sysfs_sensor(3);
+
+#define device_create_file_sensor(client, offset) \
+do { \
+device_create_file(&client->dev, &dev_attr_temp##offset##_type); \
+} while (0)
+
+/* This function is called when:
+     * w83781d_driver is inserted (when this module is loaded), for each
+       available adapter
+     * when a new adapter is inserted (and w83781d_driver is still present) */
+static int
+w83781d_attach_adapter(struct i2c_adapter *adapter)
+{
+	if (!(adapter->class & I2C_CLASS_HWMON))
+		return 0;
+	return i2c_detect(adapter, &addr_data, w83781d_detect);
+}
+
+/* Assumes that adapter is of I2C, not ISA variety.
+ * OTHERWISE DON'T CALL THIS
+ */
+static int
+w83781d_detect_subclients(struct i2c_adapter *adapter, int address, int kind,
+		struct i2c_client *new_client)
+{
+	int i, val1 = 0, id;
+	int err;
+	const char *client_name = "";
+	struct w83781d_data *data = i2c_get_clientdata(new_client);
+
+	data->lm75[0] = kmalloc(sizeof(struct i2c_client), GFP_KERNEL);
+	if (!(data->lm75[0])) {
+		err = -ENOMEM;
+		goto ERROR_SC_0;
+	}
+	memset(data->lm75[0], 0x00, sizeof (struct i2c_client));
+
+	id = i2c_adapter_id(adapter);
+
+	if (force_subclients[0] == id && force_subclients[1] == address) {
+		for (i = 2; i <= 3; i++) {
+			if (force_subclients[i] < 0x48 ||
+			    force_subclients[i] > 0x4f) {
+				dev_err(&new_client->dev, "Invalid subclient "
+					"address %d; must be 0x48-0x4f\n",
+					force_subclients[i]);
+				err = -EINVAL;
+				goto ERROR_SC_1;
+			}
+		}
+		w83781d_write_value(new_client, W83781D_REG_I2C_SUBADDR,
+				(force_subclients[2] & 0x07) |
+				((force_subclients[3] & 0x07) << 4));
+		data->lm75[0]->addr = force_subclients[2];
+	} else {
+		val1 = w83781d_read_value(new_client, W83781D_REG_I2C_SUBADDR);
+		data->lm75[0]->addr = 0x48 + (val1 & 0x07);
+	}
+
+	if (kind != w83783s) {
+
+		data->lm75[1] = kmalloc(sizeof(struct i2c_client), GFP_KERNEL);
+		if (!(data->lm75[1])) {
+			err = -ENOMEM;
+			goto ERROR_SC_1;
+		}
+		memset(data->lm75[1], 0x0, sizeof(struct i2c_client));
+
+		if (force_subclients[0] == id &&
+		    force_subclients[1] == address) {
+			data->lm75[1]->addr = force_subclients[3];
+		} else {
+			data->lm75[1]->addr = 0x48 + ((val1 >> 4) & 0x07);
+		}
+		if (data->lm75[0]->addr == data->lm75[1]->addr) {
+			dev_err(&new_client->dev,
+			       "Duplicate addresses 0x%x for subclients.\n",
+			       data->lm75[0]->addr);
+			err = -EBUSY;
+			goto ERROR_SC_2;
+		}
+	}
+
+	if (kind == w83781d)
+		client_name = "w83781d subclient";
+	else if (kind == w83782d)
+		client_name = "w83782d subclient";
+	else if (kind == w83783s)
+		client_name = "w83783s subclient";
+	else if (kind == w83627hf)
+		client_name = "w83627hf subclient";
+	else if (kind == as99127f)
+		client_name = "as99127f subclient";
+
+	for (i = 0; i <= 1; i++) {
+		/* store all data in w83781d */
+		i2c_set_clientdata(data->lm75[i], NULL);
+		data->lm75[i]->adapter = adapter;
+		data->lm75[i]->driver = &w83781d_driver;
+		data->lm75[i]->flags = 0;
+		strlcpy(data->lm75[i]->name, client_name,
+			I2C_NAME_SIZE);
+		if ((err = i2c_attach_client(data->lm75[i]))) {
+			dev_err(&new_client->dev, "Subclient %d "
+				"registration at address 0x%x "
+				"failed.\n", i, data->lm75[i]->addr);
+			if (i == 1)
+				goto ERROR_SC_3;
+			goto ERROR_SC_2;
+		}
+		if (kind == w83783s)
+			break;
+	}
+
+	return 0;
+
+/* Undo inits in case of errors */
+ERROR_SC_3:
+	i2c_detach_client(data->lm75[0]);
+ERROR_SC_2:
+	if (NULL != data->lm75[1])
+		kfree(data->lm75[1]);
+ERROR_SC_1:
+	if (NULL != data->lm75[0])
+		kfree(data->lm75[0]);
+ERROR_SC_0:
+	return err;
+}
+
+static int
+w83781d_detect(struct i2c_adapter *adapter, int address, int kind)
+{
+	int i = 0, val1 = 0, val2;
+	struct i2c_client *new_client;
+	struct w83781d_data *data;
+	int err;
+	const char *client_name = "";
+	int is_isa = i2c_is_isa_adapter(adapter);
+	enum vendor { winbond, asus } vendid;
+
+	if (!is_isa
+	    && !i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) {
+		err = -EINVAL;
+		goto ERROR0;
+	}
+
+	/* Prevent users from forcing a kind for a bus it isn't supposed
+	   to possibly be on */
+	if (is_isa && (kind == as99127f || kind == w83783s)) {
+		dev_err(&adapter->dev,
+			"Cannot force I2C-only chip for ISA address 0x%02x.\n",
+			address);
+		err = -EINVAL;
+		goto ERROR0;
+	}
+	if (!is_isa && kind == w83697hf) {
+		dev_err(&adapter->dev,
+			"Cannot force ISA-only chip for I2C address 0x%02x.\n",
+			address);
+		err = -EINVAL;
+		goto ERROR0;
+	}
+	
+	if (is_isa)
+		if (!request_region(address, W83781D_EXTENT,
+				    w83781d_driver.name)) {
+			dev_dbg(&adapter->dev, "Request of region "
+				"0x%x-0x%x for w83781d failed\n", address,
+				address + W83781D_EXTENT - 1);
+			err = -EBUSY;
+			goto ERROR0;
+		}
+
+	/* Probe whether there is anything available on this address. Already
+	   done for SMBus clients */
+	if (kind < 0) {
+		if (is_isa) {
+
+#define REALLY_SLOW_IO
+			/* We need the timeouts for at least some LM78-like
+			   chips. But only if we read 'undefined' registers. */
+			i = inb_p(address + 1);
+			if (inb_p(address + 2) != i
+			 || inb_p(address + 3) != i
+			 || inb_p(address + 7) != i) {
+				dev_dbg(&adapter->dev, "Detection of w83781d "
+					"chip failed at step 1\n");
+				err = -ENODEV;
+				goto ERROR1;
+			}
+#undef REALLY_SLOW_IO
+
+			/* Let's just hope nothing breaks here */
+			i = inb_p(address + 5) & 0x7f;
+			outb_p(~i & 0x7f, address + 5);
+			val2 = inb_p(address + 5) & 0x7f;
+			if (val2 != (~i & 0x7f)) {
+				outb_p(i, address + 5);
+				dev_dbg(&adapter->dev, "Detection of w83781d "
+					"chip failed at step 2 (0x%x != "
+					"0x%x at 0x%x)\n", val2, ~i & 0x7f,
+					address + 5);
+				err = -ENODEV;
+				goto ERROR1;
+			}
+		}
+	}
+
+	/* OK. For now, we presume we have a valid client. We now create the
+	   client structure, even though we cannot fill it completely yet.
+	   But it allows us to access w83781d_{read,write}_value. */
+
+	if (!(data = kmalloc(sizeof(struct w83781d_data), GFP_KERNEL))) {
+		err = -ENOMEM;
+		goto ERROR1;
+	}
+	memset(data, 0, sizeof(struct w83781d_data));
+
+	new_client = &data->client;
+	i2c_set_clientdata(new_client, data);
+	new_client->addr = address;
+	init_MUTEX(&data->lock);
+	new_client->adapter = adapter;
+	new_client->driver = &w83781d_driver;
+	new_client->flags = 0;
+
+	/* Now, we do the remaining detection. */
+
+	/* The w8378?d may be stuck in some other bank than bank 0. This may
+	   make reading other information impossible. Specify a force=... or
+	   force_*=... parameter, and the Winbond will be reset to the right
+	   bank. */
+	if (kind < 0) {
+		if (w83781d_read_value(new_client, W83781D_REG_CONFIG) & 0x80) {
+			dev_dbg(&new_client->dev, "Detection failed at step "
+				"3\n");
+			err = -ENODEV;
+			goto ERROR2;
+		}
+		val1 = w83781d_read_value(new_client, W83781D_REG_BANK);
+		val2 = w83781d_read_value(new_client, W83781D_REG_CHIPMAN);
+		/* Check for Winbond or Asus ID if in bank 0 */
+		if ((!(val1 & 0x07)) &&
+		    (((!(val1 & 0x80)) && (val2 != 0xa3) && (val2 != 0xc3))
+		     || ((val1 & 0x80) && (val2 != 0x5c) && (val2 != 0x12)))) {
+			dev_dbg(&new_client->dev, "Detection failed at step "
+				"4\n");
+			err = -ENODEV;
+			goto ERROR2;
+		}
+		/* If Winbond SMBus, check address at 0x48.
+		   Asus doesn't support, except for as99127f rev.2 */
+		if ((!is_isa) && (((!(val1 & 0x80)) && (val2 == 0xa3)) ||
+				  ((val1 & 0x80) && (val2 == 0x5c)))) {
+			if (w83781d_read_value
+			    (new_client, W83781D_REG_I2C_ADDR) != address) {
+				dev_dbg(&new_client->dev, "Detection failed "
+					"at step 5\n");
+				err = -ENODEV;
+				goto ERROR2;
+			}
+		}
+	}
+
+	/* We have either had a force parameter, or we have already detected the
+	   Winbond. Put it now into bank 0 and Vendor ID High Byte */
+	w83781d_write_value(new_client, W83781D_REG_BANK,
+			    (w83781d_read_value(new_client,
+						W83781D_REG_BANK) & 0x78) |
+			    0x80);
+
+	/* Determine the chip type. */
+	if (kind <= 0) {
+		/* get vendor ID */
+		val2 = w83781d_read_value(new_client, W83781D_REG_CHIPMAN);
+		if (val2 == 0x5c)
+			vendid = winbond;
+		else if (val2 == 0x12)
+			vendid = asus;
+		else {
+			dev_dbg(&new_client->dev, "Chip was made by neither "
+				"Winbond nor Asus?\n");
+			err = -ENODEV;
+			goto ERROR2;
+		}
+
+		val1 = w83781d_read_value(new_client, W83781D_REG_WCHIPID);
+		if ((val1 == 0x10 || val1 == 0x11) && vendid == winbond)
+			kind = w83781d;
+		else if (val1 == 0x30 && vendid == winbond)
+			kind = w83782d;
+		else if (val1 == 0x40 && vendid == winbond && !is_isa
+				&& address == 0x2d)
+			kind = w83783s;
+		else if ((val1 == 0x21 || val1 == 0x90) && vendid == winbond)
+			kind = w83627hf;
+		else if (val1 == 0x31 && !is_isa && address >= 0x28)
+			kind = as99127f;
+		else if (val1 == 0x60 && vendid == winbond && is_isa)
+			kind = w83697hf;
+		else {
+			if (kind == 0)
+				dev_warn(&new_client->dev, "Ignoring 'force' "
+					 "parameter for unknown chip at "
+					 "adapter %d, address 0x%02x\n",
+					 i2c_adapter_id(adapter), address);
+			err = -EINVAL;
+			goto ERROR2;
+		}
+	}
+
+	if (kind == w83781d) {
+		client_name = "w83781d";
+	} else if (kind == w83782d) {
+		client_name = "w83782d";
+	} else if (kind == w83783s) {
+		client_name = "w83783s";
+	} else if (kind == w83627hf) {
+		if (val1 == 0x90)
+			client_name = "w83627thf";
+		else
+			client_name = "w83627hf";
+	} else if (kind == as99127f) {
+		client_name = "as99127f";
+	} else if (kind == w83697hf) {
+		client_name = "w83697hf";
+	}
+
+	/* Fill in the remaining client fields and put into the global list */
+	strlcpy(new_client->name, client_name, I2C_NAME_SIZE);
+	data->type = kind;
+
+	data->valid = 0;
+	init_MUTEX(&data->update_lock);
+
+	/* Tell the I2C layer a new client has arrived */
+	if ((err = i2c_attach_client(new_client)))
+		goto ERROR2;
+
+	/* attach secondary i2c lm75-like clients */
+	if (!is_isa) {
+		if ((err = w83781d_detect_subclients(adapter, address,
+				kind, new_client)))
+			goto ERROR3;
+	} else {
+		data->lm75[0] = NULL;
+		data->lm75[1] = NULL;
+	}
+
+	/* Initialize the chip */
+	w83781d_init_client(new_client);
+
+	/* A few vars need to be filled upon startup */
+	for (i = 1; i <= 3; i++) {
+		data->fan_min[i - 1] = w83781d_read_value(new_client,
+					W83781D_REG_FAN_MIN(i));
+	}
+	if (kind != w83781d && kind != as99127f)
+		for (i = 0; i < 4; i++)
+			data->pwmenable[i] = 1;
+
+	/* Register sysfs hooks */
+	device_create_file_in(new_client, 0);
+	if (kind != w83783s && kind != w83697hf)
+		device_create_file_in(new_client, 1);
+	device_create_file_in(new_client, 2);
+	device_create_file_in(new_client, 3);
+	device_create_file_in(new_client, 4);
+	device_create_file_in(new_client, 5);
+	device_create_file_in(new_client, 6);
+	if (kind != as99127f && kind != w83781d && kind != w83783s) {
+		device_create_file_in(new_client, 7);
+		device_create_file_in(new_client, 8);
+	}
+
+	device_create_file_fan(new_client, 1);
+	device_create_file_fan(new_client, 2);
+	if (kind != w83697hf)
+		device_create_file_fan(new_client, 3);
+
+	device_create_file_temp(new_client, 1);
+	device_create_file_temp(new_client, 2);
+	if (kind != w83783s && kind != w83697hf)
+		device_create_file_temp(new_client, 3);
+
+	if (kind != w83697hf)
+		device_create_file_vid(new_client);
+
+	if (kind != w83697hf)
+		device_create_file_vrm(new_client);
+
+	device_create_file_fan_div(new_client, 1);
+	device_create_file_fan_div(new_client, 2);
+	if (kind != w83697hf)
+		device_create_file_fan_div(new_client, 3);
+
+	device_create_file_alarms(new_client);
+
+	device_create_file_beep(new_client);
+
+	if (kind != w83781d && kind != as99127f) {
+		device_create_file_pwm(new_client, 1);
+		device_create_file_pwm(new_client, 2);
+		device_create_file_pwmenable(new_client, 2);
+	}
+	if (kind == w83782d && !is_isa) {
+		device_create_file_pwm(new_client, 3);
+		device_create_file_pwm(new_client, 4);
+	}
+
+	if (kind != as99127f && kind != w83781d) {
+		device_create_file_sensor(new_client, 1);
+		device_create_file_sensor(new_client, 2);
+		if (kind != w83783s && kind != w83697hf)
+			device_create_file_sensor(new_client, 3);
+	}
+
+	return 0;
+
+ERROR3:
+	i2c_detach_client(new_client);
+ERROR2:
+	kfree(data);
+ERROR1:
+	if (is_isa)
+		release_region(address, W83781D_EXTENT);
+ERROR0:
+	return err;
+}
+
+static int
+w83781d_detach_client(struct i2c_client *client)
+{
+	int err;
+
+	if (i2c_is_isa_client(client))
+		release_region(client->addr, W83781D_EXTENT);
+
+	if ((err = i2c_detach_client(client))) {
+		dev_err(&client->dev,
+		       "Client deregistration failed, client not detached.\n");
+		return err;
+	}
+
+	if (i2c_get_clientdata(client)==NULL) {
+		/* subclients */
+		kfree(client);
+	} else {
+		/* main client */
+		kfree(i2c_get_clientdata(client));
+	}
+
+	return 0;
+}
+
+/* The SMBus locks itself, usually, but nothing may access the Winbond between
+   bank switches. ISA access must always be locked explicitly! 
+   We ignore the W83781D BUSY flag at this moment - it could lead to deadlocks,
+   would slow down the W83781D access and should not be necessary. 
+   There are some ugly typecasts here, but the good news is - they should
+   nowhere else be necessary! */
+static int
+w83781d_read_value(struct i2c_client *client, u16 reg)
+{
+	struct w83781d_data *data = i2c_get_clientdata(client);
+	int res, word_sized, bank;
+	struct i2c_client *cl;
+
+	down(&data->lock);
+	if (i2c_is_isa_client(client)) {
+		word_sized = (((reg & 0xff00) == 0x100)
+			      || ((reg & 0xff00) == 0x200))
+		    && (((reg & 0x00ff) == 0x50)
+			|| ((reg & 0x00ff) == 0x53)
+			|| ((reg & 0x00ff) == 0x55));
+		if (reg & 0xff00) {
+			outb_p(W83781D_REG_BANK,
+			       client->addr + W83781D_ADDR_REG_OFFSET);
+			outb_p(reg >> 8,
+			       client->addr + W83781D_DATA_REG_OFFSET);
+		}
+		outb_p(reg & 0xff, client->addr + W83781D_ADDR_REG_OFFSET);
+		res = inb_p(client->addr + W83781D_DATA_REG_OFFSET);
+		if (word_sized) {
+			outb_p((reg & 0xff) + 1,
+			       client->addr + W83781D_ADDR_REG_OFFSET);
+			res =
+			    (res << 8) + inb_p(client->addr +
+					       W83781D_DATA_REG_OFFSET);
+		}
+		if (reg & 0xff00) {
+			outb_p(W83781D_REG_BANK,
+			       client->addr + W83781D_ADDR_REG_OFFSET);
+			outb_p(0, client->addr + W83781D_DATA_REG_OFFSET);
+		}
+	} else {
+		bank = (reg >> 8) & 0x0f;
+		if (bank > 2)
+			/* switch banks */
+			i2c_smbus_write_byte_data(client, W83781D_REG_BANK,
+						  bank);
+		if (bank == 0 || bank > 2) {
+			res = i2c_smbus_read_byte_data(client, reg & 0xff);
+		} else {
+			/* switch to subclient */
+			cl = data->lm75[bank - 1];
+			/* convert from ISA to LM75 I2C addresses */
+			switch (reg & 0xff) {
+			case 0x50:	/* TEMP */
+				res = swab16(i2c_smbus_read_word_data(cl, 0));
+				break;
+			case 0x52:	/* CONFIG */
+				res = i2c_smbus_read_byte_data(cl, 1);
+				break;
+			case 0x53:	/* HYST */
+				res = swab16(i2c_smbus_read_word_data(cl, 2));
+				break;
+			case 0x55:	/* OVER */
+			default:
+				res = swab16(i2c_smbus_read_word_data(cl, 3));
+				break;
+			}
+		}
+		if (bank > 2)
+			i2c_smbus_write_byte_data(client, W83781D_REG_BANK, 0);
+	}
+	up(&data->lock);
+	return res;
+}
+
+static int
+w83781d_write_value(struct i2c_client *client, u16 reg, u16 value)
+{
+	struct w83781d_data *data = i2c_get_clientdata(client);
+	int word_sized, bank;
+	struct i2c_client *cl;
+
+	down(&data->lock);
+	if (i2c_is_isa_client(client)) {
+		word_sized = (((reg & 0xff00) == 0x100)
+			      || ((reg & 0xff00) == 0x200))
+		    && (((reg & 0x00ff) == 0x53)
+			|| ((reg & 0x00ff) == 0x55));
+		if (reg & 0xff00) {
+			outb_p(W83781D_REG_BANK,
+			       client->addr + W83781D_ADDR_REG_OFFSET);
+			outb_p(reg >> 8,
+			       client->addr + W83781D_DATA_REG_OFFSET);
+		}
+		outb_p(reg & 0xff, client->addr + W83781D_ADDR_REG_OFFSET);
+		if (word_sized) {
+			outb_p(value >> 8,
+			       client->addr + W83781D_DATA_REG_OFFSET);
+			outb_p((reg & 0xff) + 1,
+			       client->addr + W83781D_ADDR_REG_OFFSET);
+		}
+		outb_p(value & 0xff, client->addr + W83781D_DATA_REG_OFFSET);
+		if (reg & 0xff00) {
+			outb_p(W83781D_REG_BANK,
+			       client->addr + W83781D_ADDR_REG_OFFSET);
+			outb_p(0, client->addr + W83781D_DATA_REG_OFFSET);
+		}
+	} else {
+		bank = (reg >> 8) & 0x0f;
+		if (bank > 2)
+			/* switch banks */
+			i2c_smbus_write_byte_data(client, W83781D_REG_BANK,
+						  bank);
+		if (bank == 0 || bank > 2) {
+			i2c_smbus_write_byte_data(client, reg & 0xff,
+						  value & 0xff);
+		} else {
+			/* switch to subclient */
+			cl = data->lm75[bank - 1];
+			/* convert from ISA to LM75 I2C addresses */
+			switch (reg & 0xff) {
+			case 0x52:	/* CONFIG */
+				i2c_smbus_write_byte_data(cl, 1, value & 0xff);
+				break;
+			case 0x53:	/* HYST */
+				i2c_smbus_write_word_data(cl, 2, swab16(value));
+				break;
+			case 0x55:	/* OVER */
+				i2c_smbus_write_word_data(cl, 3, swab16(value));
+				break;
+			}
+		}
+		if (bank > 2)
+			i2c_smbus_write_byte_data(client, W83781D_REG_BANK, 0);
+	}
+	up(&data->lock);
+	return 0;
+}
+
+/* Called when we have found a new W83781D. It should set limits, etc. */
+static void
+w83781d_init_client(struct i2c_client *client)
+{
+	struct w83781d_data *data = i2c_get_clientdata(client);
+	int i, p;
+	int type = data->type;
+	u8 tmp;
+
+	if (init && type != as99127f) {	/* this resets registers we don't have
+					   documentation for on the as99127f */
+		/* save these registers */
+		i = w83781d_read_value(client, W83781D_REG_BEEP_CONFIG);
+		p = w83781d_read_value(client, W83781D_REG_PWMCLK12);
+		/* Reset all except Watchdog values and last conversion values
+		   This sets fan-divs to 2, among others */
+		w83781d_write_value(client, W83781D_REG_CONFIG, 0x80);
+		/* Restore the registers and disable power-on abnormal beep.
+		   This saves FAN 1/2/3 input/output values set by BIOS. */
+		w83781d_write_value(client, W83781D_REG_BEEP_CONFIG, i | 0x80);
+		w83781d_write_value(client, W83781D_REG_PWMCLK12, p);
+		/* Disable master beep-enable (reset turns it on).
+		   Individual beep_mask should be reset to off but for some reason
+		   disabling this bit helps some people not get beeped */
+		w83781d_write_value(client, W83781D_REG_BEEP_INTS2, 0);
+	}
+
+	data->vrm = i2c_which_vrm();
+
+	if ((type != w83781d) && (type != as99127f)) {
+		tmp = w83781d_read_value(client, W83781D_REG_SCFG1);
+		for (i = 1; i <= 3; i++) {
+			if (!(tmp & BIT_SCFG1[i - 1])) {
+				data->sens[i - 1] = W83781D_DEFAULT_BETA;
+			} else {
+				if (w83781d_read_value
+				    (client,
+				     W83781D_REG_SCFG2) & BIT_SCFG2[i - 1])
+					data->sens[i - 1] = 1;
+				else
+					data->sens[i - 1] = 2;
+			}
+			if ((type == w83783s || type == w83697hf) && (i == 2))
+				break;
+		}
+	}
+
+	if (init && type != as99127f) {
+		/* Enable temp2 */
+		tmp = w83781d_read_value(client, W83781D_REG_TEMP2_CONFIG);
+		if (tmp & 0x01) {
+			dev_warn(&client->dev, "Enabling temp2, readings "
+				 "might not make sense\n");
+			w83781d_write_value(client, W83781D_REG_TEMP2_CONFIG,
+				tmp & 0xfe);
+		}
+
+		/* Enable temp3 */
+		if (type != w83783s && type != w83697hf) {
+			tmp = w83781d_read_value(client,
+				W83781D_REG_TEMP3_CONFIG);
+			if (tmp & 0x01) {
+				dev_warn(&client->dev, "Enabling temp3, "
+					 "readings might not make sense\n");
+				w83781d_write_value(client,
+					W83781D_REG_TEMP3_CONFIG, tmp & 0xfe);
+			}
+		}
+
+		if (type != w83781d) {
+			/* enable comparator mode for temp2 and temp3 so
+			   alarm indication will work correctly */
+			i = w83781d_read_value(client, W83781D_REG_IRQ);
+			if (!(i & 0x40))
+				w83781d_write_value(client, W83781D_REG_IRQ,
+						    i | 0x40);
+		}
+	}
+
+	/* Start monitoring */
+	w83781d_write_value(client, W83781D_REG_CONFIG,
+			    (w83781d_read_value(client,
+						W83781D_REG_CONFIG) & 0xf7)
+			    | 0x01);
+}
+
+static struct w83781d_data *w83781d_update_device(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct w83781d_data *data = i2c_get_clientdata(client);
+	int i;
+
+	down(&data->update_lock);
+
+	if (time_after(jiffies, data->last_updated + HZ + HZ / 2)
+	    || !data->valid) {
+		dev_dbg(dev, "Starting device update\n");
+
+		for (i = 0; i <= 8; i++) {
+			if ((data->type == w83783s || data->type == w83697hf)
+			    && (i == 1))
+				continue;	/* 783S has no in1 */
+			data->in[i] =
+			    w83781d_read_value(client, W83781D_REG_IN(i));
+			data->in_min[i] =
+			    w83781d_read_value(client, W83781D_REG_IN_MIN(i));
+			data->in_max[i] =
+			    w83781d_read_value(client, W83781D_REG_IN_MAX(i));
+			if ((data->type != w83782d) && (data->type != w83697hf)
+			    && (data->type != w83627hf) && (i == 6))
+				break;
+		}
+		for (i = 1; i <= 3; i++) {
+			data->fan[i - 1] =
+			    w83781d_read_value(client, W83781D_REG_FAN(i));
+			data->fan_min[i - 1] =
+			    w83781d_read_value(client, W83781D_REG_FAN_MIN(i));
+		}
+		if (data->type != w83781d && data->type != as99127f) {
+			for (i = 1; i <= 4; i++) {
+				data->pwm[i - 1] =
+				    w83781d_read_value(client,
+						       W83781D_REG_PWM(i));
+				if ((data->type != w83782d
+				     || i2c_is_isa_client(client))
+				    && i == 2)
+					break;
+			}
+			/* Only PWM2 can be disabled */
+			data->pwmenable[1] = (w83781d_read_value(client,
+					      W83781D_REG_PWMCLK12) & 0x08) >> 3;
+		}
+
+		data->temp = w83781d_read_value(client, W83781D_REG_TEMP(1));
+		data->temp_max =
+		    w83781d_read_value(client, W83781D_REG_TEMP_OVER(1));
+		data->temp_max_hyst =
+		    w83781d_read_value(client, W83781D_REG_TEMP_HYST(1));
+		data->temp_add[0] =
+		    w83781d_read_value(client, W83781D_REG_TEMP(2));
+		data->temp_max_add[0] =
+		    w83781d_read_value(client, W83781D_REG_TEMP_OVER(2));
+		data->temp_max_hyst_add[0] =
+		    w83781d_read_value(client, W83781D_REG_TEMP_HYST(2));
+		if (data->type != w83783s && data->type != w83697hf) {
+			data->temp_add[1] =
+			    w83781d_read_value(client, W83781D_REG_TEMP(3));
+			data->temp_max_add[1] =
+			    w83781d_read_value(client,
+					       W83781D_REG_TEMP_OVER(3));
+			data->temp_max_hyst_add[1] =
+			    w83781d_read_value(client,
+					       W83781D_REG_TEMP_HYST(3));
+		}
+		i = w83781d_read_value(client, W83781D_REG_VID_FANDIV);
+		if (data->type != w83697hf) {
+			data->vid = i & 0x0f;
+			data->vid |=
+			    (w83781d_read_value(client, W83781D_REG_CHIPID) &
+			     0x01)
+			    << 4;
+		}
+		data->fan_div[0] = (i >> 4) & 0x03;
+		data->fan_div[1] = (i >> 6) & 0x03;
+		if (data->type != w83697hf) {
+			data->fan_div[2] = (w83781d_read_value(client,
+							       W83781D_REG_PIN)
+					    >> 6) & 0x03;
+		}
+		if ((data->type != w83781d) && (data->type != as99127f)) {
+			i = w83781d_read_value(client, W83781D_REG_VBAT);
+			data->fan_div[0] |= (i >> 3) & 0x04;
+			data->fan_div[1] |= (i >> 4) & 0x04;
+			if (data->type != w83697hf)
+				data->fan_div[2] |= (i >> 5) & 0x04;
+		}
+		data->alarms =
+		    w83781d_read_value(client,
+				       W83781D_REG_ALARM1) +
+		    (w83781d_read_value(client, W83781D_REG_ALARM2) << 8);
+		if ((data->type == w83782d) || (data->type == w83627hf)) {
+			data->alarms |=
+			    w83781d_read_value(client,
+					       W83781D_REG_ALARM3) << 16;
+		}
+		i = w83781d_read_value(client, W83781D_REG_BEEP_INTS2);
+		data->beep_enable = i >> 7;
+		data->beep_mask = ((i & 0x7f) << 8) +
+		    w83781d_read_value(client, W83781D_REG_BEEP_INTS1);
+		if ((data->type != w83781d) && (data->type != as99127f)) {
+			data->beep_mask |=
+			    w83781d_read_value(client,
+					       W83781D_REG_BEEP_INTS3) << 16;
+		}
+		data->last_updated = jiffies;
+		data->valid = 1;
+	}
+
+	up(&data->update_lock);
+
+	return data;
+}
+
+static int __init
+sensors_w83781d_init(void)
+{
+	return i2c_add_driver(&w83781d_driver);
+}
+
+static void __exit
+sensors_w83781d_exit(void)
+{
+	i2c_del_driver(&w83781d_driver);
+}
+
+MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl>, "
+	      "Philip Edelbrock <phil@netroedge.com>, "
+	      "and Mark Studebaker <mdsxyz123@yahoo.com>");
+MODULE_DESCRIPTION("W83781D driver");
+MODULE_LICENSE("GPL");
+
+module_init(sensors_w83781d_init);
+module_exit(sensors_w83781d_exit);
diff --git a/drivers/i2c/chips/w83l785ts.c b/drivers/i2c/chips/w83l785ts.c
new file mode 100644
index 00000000000..59bbc5881fa
--- /dev/null
+++ b/drivers/i2c/chips/w83l785ts.c
@@ -0,0 +1,329 @@
+/*
+ * w83l785ts.c - Part of lm_sensors, Linux kernel modules for hardware
+ *               monitoring
+ * Copyright (C) 2003-2004  Jean Delvare <khali@linux-fr.org>
+ *
+ * Inspired from the lm83 driver. The W83L785TS-S is a sensor chip made
+ * by Winbond. It reports a single external temperature with a 1 deg
+ * resolution and a 3 deg accuracy. Datasheet can be obtained from
+ * Winbond's website at:
+ *   http://www.winbond-usa.com/products/winbond_products/pdfs/PCIC/W83L785TS-S.pdf
+ *
+ * Ported to Linux 2.6 by Wolfgang Ziegler <nuppla@gmx.at> and Jean Delvare
+ * <khali@linux-fr.org>.
+ *
+ * Thanks to James Bolt <james@evilpenguin.com> for benchmarking the read
+ * error handling mechanism.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/jiffies.h>
+#include <linux/i2c.h>
+#include <linux/i2c-sensor.h>
+
+/* How many retries on register read error */
+#define MAX_RETRIES	5
+
+/*
+ * Address to scan
+ * Address is fully defined internally and cannot be changed.
+ */
+
+static unsigned short normal_i2c[] = { 0x2e, I2C_CLIENT_END };
+static unsigned int normal_isa[] = { I2C_CLIENT_ISA_END };
+
+/*
+ * Insmod parameters
+ */
+
+SENSORS_INSMOD_1(w83l785ts);
+
+/*
+ * The W83L785TS-S registers
+ * Manufacturer ID is 0x5CA3 for Winbond.
+ */
+
+#define W83L785TS_REG_MAN_ID1		0x4D
+#define W83L785TS_REG_MAN_ID2		0x4C
+#define W83L785TS_REG_CHIP_ID		0x4E
+#define W83L785TS_REG_CONFIG		0x40
+#define W83L785TS_REG_TYPE		0x52
+#define W83L785TS_REG_TEMP		0x27
+#define W83L785TS_REG_TEMP_OVER		0x53 /* not sure about this one */
+
+/*
+ * Conversions
+ * The W83L785TS-S uses signed 8-bit values.
+ */
+
+#define TEMP_FROM_REG(val)	((val & 0x80 ? val-0x100 : val) * 1000)
+
+/*
+ * Functions declaration
+ */
+
+static int w83l785ts_attach_adapter(struct i2c_adapter *adapter);
+static int w83l785ts_detect(struct i2c_adapter *adapter, int address,
+	int kind);
+static int w83l785ts_detach_client(struct i2c_client *client);
+static u8 w83l785ts_read_value(struct i2c_client *client, u8 reg, u8 defval);
+static struct w83l785ts_data *w83l785ts_update_device(struct device *dev);
+
+/*
+ * Driver data (common to all clients)
+ */
+ 
+static struct i2c_driver w83l785ts_driver = {
+	.owner		= THIS_MODULE,
+	.name		= "w83l785ts",
+	.id		= I2C_DRIVERID_W83L785TS,
+	.flags		= I2C_DF_NOTIFY,
+	.attach_adapter	= w83l785ts_attach_adapter,
+	.detach_client	= w83l785ts_detach_client,
+};
+
+/*
+ * Client data (each client gets its own)
+ */
+
+struct w83l785ts_data {
+	struct i2c_client client;
+	struct semaphore update_lock;
+	char valid; /* zero until following fields are valid */
+	unsigned long last_updated; /* in jiffies */
+
+	/* registers values */
+	u8 temp, temp_over;
+};
+
+/*
+ * Sysfs stuff
+ */
+
+static ssize_t show_temp(struct device *dev, char *buf)
+{
+	struct w83l785ts_data *data = w83l785ts_update_device(dev);
+	return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp));
+}
+
+static ssize_t show_temp_over(struct device *dev, char *buf)
+{
+	struct w83l785ts_data *data = w83l785ts_update_device(dev);
+	return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_over));
+}
+
+static DEVICE_ATTR(temp1_input, S_IRUGO, show_temp, NULL);
+static DEVICE_ATTR(temp1_max, S_IRUGO, show_temp_over, NULL);
+
+/*
+ * Real code
+ */
+
+static int w83l785ts_attach_adapter(struct i2c_adapter *adapter)
+{
+	if (!(adapter->class & I2C_CLASS_HWMON))
+		return 0;
+	return i2c_detect(adapter, &addr_data, w83l785ts_detect);
+}
+
+/*
+ * The following function does more than just detection. If detection
+ * succeeds, it also registers the new chip.
+ */
+static int w83l785ts_detect(struct i2c_adapter *adapter, int address, int kind)
+{
+	struct i2c_client *new_client;
+	struct w83l785ts_data *data;
+	int err = 0;
+
+
+	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
+		goto exit;
+
+	if (!(data = kmalloc(sizeof(struct w83l785ts_data), GFP_KERNEL))) {
+		err = -ENOMEM;
+		goto exit;
+	}
+	memset(data, 0, sizeof(struct w83l785ts_data));
+
+
+	/* The common I2C client data is placed right before the
+	 * W83L785TS-specific data. */
+	new_client = &data->client;
+	i2c_set_clientdata(new_client, data);
+	new_client->addr = address;
+	new_client->adapter = adapter;
+	new_client->driver = &w83l785ts_driver;
+	new_client->flags = 0;
+
+	/*
+	 * Now we do the remaining detection. A negative kind means that
+	 * the driver was loaded with no force parameter (default), so we
+	 * must both detect and identify the chip (actually there is only
+	 * one possible kind of chip for now, W83L785TS-S). A zero kind means
+	 * that the driver was loaded with the force parameter, the detection
+	 * step shall be skipped. A positive kind means that the driver
+	 * was loaded with the force parameter and a given kind of chip is
+	 * requested, so both the detection and the identification steps
+	 * are skipped.
+	 */
+	if (kind < 0) { /* detection */
+		if (((w83l785ts_read_value(new_client,
+		      W83L785TS_REG_CONFIG, 0) & 0x80) != 0x00)
+		 || ((w83l785ts_read_value(new_client,
+		      W83L785TS_REG_TYPE, 0) & 0xFC) != 0x00)) {
+			dev_dbg(&adapter->dev,
+				"W83L785TS-S detection failed at 0x%02x.\n",
+				address);
+			goto exit_free;
+		}
+	}
+
+	if (kind <= 0) { /* identification */
+		u16 man_id;
+		u8 chip_id;
+
+		man_id = (w83l785ts_read_value(new_client,
+			 W83L785TS_REG_MAN_ID1, 0) << 8) +
+			 w83l785ts_read_value(new_client,
+			 W83L785TS_REG_MAN_ID2, 0);
+		chip_id = w83l785ts_read_value(new_client,
+			  W83L785TS_REG_CHIP_ID, 0);
+
+		if (man_id == 0x5CA3) { /* Winbond */
+			if (chip_id == 0x70) { /* W83L785TS-S */
+				kind = w83l785ts;			
+			}
+		}
+	
+		if (kind <= 0) { /* identification failed */
+			dev_info(&adapter->dev,
+				 "Unsupported chip (man_id=0x%04X, "
+				 "chip_id=0x%02X).\n", man_id, chip_id);
+			goto exit_free;
+		}
+	}
+
+	/* We can fill in the remaining client fields. */
+	strlcpy(new_client->name, "w83l785ts", I2C_NAME_SIZE);
+	data->valid = 0;
+	init_MUTEX(&data->update_lock);
+
+	/* Default values in case the first read fails (unlikely). */
+	data->temp_over = data->temp = 0;
+
+	/* Tell the I2C layer a new client has arrived. */
+	if ((err = i2c_attach_client(new_client))) 
+		goto exit_free;
+
+	/*
+	 * Initialize the W83L785TS chip
+	 * Nothing yet, assume it is already started.
+	 */
+
+	/* Register sysfs hooks */
+	device_create_file(&new_client->dev, &dev_attr_temp1_input);
+	device_create_file(&new_client->dev, &dev_attr_temp1_max);
+
+	return 0;
+
+exit_free:
+	kfree(data);
+exit:
+	return err;
+}
+
+static int w83l785ts_detach_client(struct i2c_client *client)
+{
+	int err;
+
+	if ((err = i2c_detach_client(client))) {
+		dev_err(&client->dev, "Client deregistration failed, "
+			"client not detached.\n");
+		return err;
+	}
+
+	kfree(i2c_get_clientdata(client));
+	return 0;
+}
+
+static u8 w83l785ts_read_value(struct i2c_client *client, u8 reg, u8 defval)
+{
+	int value, i;
+
+	/* Frequent read errors have been reported on Asus boards, so we
+	 * retry on read errors. If it still fails (unlikely), return the
+	 * default value requested by the caller. */
+	for (i = 1; i <= MAX_RETRIES; i++) {
+		value = i2c_smbus_read_byte_data(client, reg);
+		if (value >= 0) {
+			dev_dbg(&client->dev, "Read 0x%02x from register "
+				"0x%02x.\n", value, reg);
+			return value;
+		}
+		dev_dbg(&client->dev, "Read failed, will retry in %d.\n", i);
+		msleep(i);
+	}
+
+	dev_err(&client->dev, "Couldn't read value from register 0x%02x. "
+		"Please report.\n", reg);
+	return defval;
+}
+
+static struct w83l785ts_data *w83l785ts_update_device(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct w83l785ts_data *data = i2c_get_clientdata(client);
+
+	down(&data->update_lock);
+
+	if (!data->valid || time_after(jiffies, data->last_updated + HZ * 2)) {
+		dev_dbg(&client->dev, "Updating w83l785ts data.\n");
+		data->temp = w83l785ts_read_value(client,
+			     W83L785TS_REG_TEMP, data->temp);
+		data->temp_over = w83l785ts_read_value(client,
+				  W83L785TS_REG_TEMP_OVER, data->temp_over);
+
+		data->last_updated = jiffies;
+		data->valid = 1;
+	}
+
+	up(&data->update_lock);
+
+	return data;
+}
+
+static int __init sensors_w83l785ts_init(void)
+{
+	return i2c_add_driver(&w83l785ts_driver);
+}
+
+static void __exit sensors_w83l785ts_exit(void)
+{
+	i2c_del_driver(&w83l785ts_driver);
+}
+
+MODULE_AUTHOR("Jean Delvare <khali@linux-fr.org>");
+MODULE_DESCRIPTION("W83L785TS-S driver");
+MODULE_LICENSE("GPL");
+
+module_init(sensors_w83l785ts_init);
+module_exit(sensors_w83l785ts_exit);
diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c
new file mode 100644
index 00000000000..9011627d7eb
--- /dev/null
+++ b/drivers/i2c/i2c-core.c
@@ -0,0 +1,1272 @@
+/* i2c-core.c - a device driver for the iic-bus interface		     */
+/* ------------------------------------------------------------------------- */
+/*   Copyright (C) 1995-99 Simon G. Vogl
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.		     */
+/* ------------------------------------------------------------------------- */
+
+/* With some changes from Kyösti Mälkki <kmalkki@cc.hut.fi>.
+   All SMBus-related things are written by Frodo Looijaard <frodol@dds.nl>
+   SMBus 2.0 support by Mark Studebaker <mdsxyz123@yahoo.com>                */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/idr.h>
+#include <linux/seq_file.h>
+#include <asm/uaccess.h>
+
+
+static LIST_HEAD(adapters);
+static LIST_HEAD(drivers);
+static DECLARE_MUTEX(core_lists);
+static DEFINE_IDR(i2c_adapter_idr);
+
+/* match always succeeds, as we want the probe() to tell if we really accept this match */
+static int i2c_device_match(struct device *dev, struct device_driver *drv)
+{
+	return 1;
+}
+
+static int i2c_bus_suspend(struct device * dev, pm_message_t state)
+{
+	int rc = 0;
+
+	if (dev->driver && dev->driver->suspend)
+		rc = dev->driver->suspend(dev,state,0);
+	return rc;
+}
+
+static int i2c_bus_resume(struct device * dev)
+{
+	int rc = 0;
+	
+	if (dev->driver && dev->driver->resume)
+		rc = dev->driver->resume(dev,0);
+	return rc;
+}
+
+static struct bus_type i2c_bus_type = {
+	.name =		"i2c",
+	.match =	i2c_device_match,
+	.suspend =      i2c_bus_suspend,
+	.resume =       i2c_bus_resume,
+};
+
+static int i2c_device_probe(struct device *dev)
+{
+	return -ENODEV;
+}
+
+static int i2c_device_remove(struct device *dev)
+{
+	return 0;
+}
+
+static void i2c_adapter_dev_release(struct device *dev)
+{
+	struct i2c_adapter *adap = dev_to_i2c_adapter(dev);
+	complete(&adap->dev_released);
+}
+
+static struct device_driver i2c_adapter_driver = {
+	.name =	"i2c_adapter",
+	.bus = &i2c_bus_type,
+	.probe = i2c_device_probe,
+	.remove = i2c_device_remove,
+};
+
+static void i2c_adapter_class_dev_release(struct class_device *dev)
+{
+	struct i2c_adapter *adap = class_dev_to_i2c_adapter(dev);
+	complete(&adap->class_dev_released);
+}
+
+static struct class i2c_adapter_class = {
+	.name =		"i2c-adapter",
+	.release =	&i2c_adapter_class_dev_release,
+};
+
+static ssize_t show_adapter_name(struct device *dev, char *buf)
+{
+	struct i2c_adapter *adap = dev_to_i2c_adapter(dev);
+	return sprintf(buf, "%s\n", adap->name);
+}
+static DEVICE_ATTR(name, S_IRUGO, show_adapter_name, NULL);
+
+
+static void i2c_client_release(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	complete(&client->released);
+}
+
+static ssize_t show_client_name(struct device *dev, char *buf)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	return sprintf(buf, "%s\n", client->name);
+}
+
+/* 
+ * We can't use the DEVICE_ATTR() macro here as we want the same filename for a
+ * different type of a device.  So beware if the DEVICE_ATTR() macro ever
+ * changes, this definition will also have to change.
+ */
+static struct device_attribute dev_attr_client_name = {
+	.attr	= {.name = "name", .mode = S_IRUGO, .owner = THIS_MODULE },
+	.show	= &show_client_name,
+};
+
+
+/* ---------------------------------------------------
+ * registering functions 
+ * --------------------------------------------------- 
+ */
+
+/* -----
+ * i2c_add_adapter is called from within the algorithm layer,
+ * when a new hw adapter registers. A new device is register to be
+ * available for clients.
+ */
+int i2c_add_adapter(struct i2c_adapter *adap)
+{
+	int id, res = 0;
+	struct list_head   *item;
+	struct i2c_driver  *driver;
+
+	down(&core_lists);
+
+	if (idr_pre_get(&i2c_adapter_idr, GFP_KERNEL) == 0) {
+		res = -ENOMEM;
+		goto out_unlock;
+	}
+
+	res = idr_get_new(&i2c_adapter_idr, NULL, &id);
+	if (res < 0) {
+		if (res == -EAGAIN)
+			res = -ENOMEM;
+		goto out_unlock;
+	}
+
+	adap->nr =  id & MAX_ID_MASK;
+	init_MUTEX(&adap->bus_lock);
+	init_MUTEX(&adap->clist_lock);
+	list_add_tail(&adap->list,&adapters);
+	INIT_LIST_HEAD(&adap->clients);
+
+	/* Add the adapter to the driver core.
+	 * If the parent pointer is not set up,
+	 * we add this adapter to the host bus.
+	 */
+	if (adap->dev.parent == NULL)
+		adap->dev.parent = &platform_bus;
+	sprintf(adap->dev.bus_id, "i2c-%d", adap->nr);
+	adap->dev.driver = &i2c_adapter_driver;
+	adap->dev.release = &i2c_adapter_dev_release;
+	device_register(&adap->dev);
+	device_create_file(&adap->dev, &dev_attr_name);
+
+	/* Add this adapter to the i2c_adapter class */
+	memset(&adap->class_dev, 0x00, sizeof(struct class_device));
+	adap->class_dev.dev = &adap->dev;
+	adap->class_dev.class = &i2c_adapter_class;
+	strlcpy(adap->class_dev.class_id, adap->dev.bus_id, BUS_ID_SIZE);
+	class_device_register(&adap->class_dev);
+
+	/* inform drivers of new adapters */
+	list_for_each(item,&drivers) {
+		driver = list_entry(item, struct i2c_driver, list);
+		if (driver->flags & I2C_DF_NOTIFY)
+			/* We ignore the return code; if it fails, too bad */
+			driver->attach_adapter(adap);
+	}
+
+	dev_dbg(&adap->dev, "registered as adapter #%d\n", adap->nr);
+
+out_unlock:
+	up(&core_lists);
+	return res;
+}
+
+
+int i2c_del_adapter(struct i2c_adapter *adap)
+{
+	struct list_head  *item, *_n;
+	struct i2c_adapter *adap_from_list;
+	struct i2c_driver *driver;
+	struct i2c_client *client;
+	int res = 0;
+
+	down(&core_lists);
+
+	/* First make sure that this adapter was ever added */
+	list_for_each_entry(adap_from_list, &adapters, list) {
+		if (adap_from_list == adap)
+			break;
+	}
+	if (adap_from_list != adap) {
+		pr_debug("I2C: Attempting to delete an unregistered "
+			 "adapter\n");
+		res = -EINVAL;
+		goto out_unlock;
+	}
+
+	list_for_each(item,&drivers) {
+		driver = list_entry(item, struct i2c_driver, list);
+		if (driver->detach_adapter)
+			if ((res = driver->detach_adapter(adap))) {
+				dev_warn(&adap->dev, "can't detach adapter "
+					 "while detaching driver %s: driver not "
+					 "detached!", driver->name);
+				goto out_unlock;
+			}
+	}
+
+	/* detach any active clients. This must be done first, because
+	 * it can fail; in which case we give upp. */
+	list_for_each_safe(item, _n, &adap->clients) {
+		client = list_entry(item, struct i2c_client, list);
+
+		/* detaching devices is unconditional of the set notify
+		 * flag, as _all_ clients that reside on the adapter
+		 * must be deleted, as this would cause invalid states.
+		 */
+		if ((res=client->driver->detach_client(client))) {
+			dev_err(&adap->dev, "adapter not "
+				"unregistered, because client at "
+				"address %02x can't be detached. ",
+				client->addr);
+			goto out_unlock;
+		}
+	}
+
+	/* clean up the sysfs representation */
+	init_completion(&adap->dev_released);
+	init_completion(&adap->class_dev_released);
+	class_device_unregister(&adap->class_dev);
+	device_remove_file(&adap->dev, &dev_attr_name);
+	device_unregister(&adap->dev);
+	list_del(&adap->list);
+
+	/* wait for sysfs to drop all references */
+	wait_for_completion(&adap->dev_released);
+	wait_for_completion(&adap->class_dev_released);
+
+	/* free dynamically allocated bus id */
+	idr_remove(&i2c_adapter_idr, adap->nr);
+
+	dev_dbg(&adap->dev, "adapter unregistered\n");
+
+ out_unlock:
+	up(&core_lists);
+	return res;
+}
+
+
+/* -----
+ * What follows is the "upwards" interface: commands for talking to clients,
+ * which implement the functions to access the physical information of the
+ * chips.
+ */
+
+int i2c_add_driver(struct i2c_driver *driver)
+{
+	struct list_head   *item;
+	struct i2c_adapter *adapter;
+	int res = 0;
+
+	down(&core_lists);
+
+	/* add the driver to the list of i2c drivers in the driver core */
+	driver->driver.name = driver->name;
+	driver->driver.bus = &i2c_bus_type;
+	driver->driver.probe = i2c_device_probe;
+	driver->driver.remove = i2c_device_remove;
+
+	res = driver_register(&driver->driver);
+	if (res)
+		goto out_unlock;
+	
+	list_add_tail(&driver->list,&drivers);
+	pr_debug("i2c-core: driver %s registered.\n", driver->name);
+
+	/* now look for instances of driver on our adapters */
+	if (driver->flags & I2C_DF_NOTIFY) {
+		list_for_each(item,&adapters) {
+			adapter = list_entry(item, struct i2c_adapter, list);
+			driver->attach_adapter(adapter);
+		}
+	}
+
+ out_unlock:
+	up(&core_lists);
+	return res;
+}
+
+int i2c_del_driver(struct i2c_driver *driver)
+{
+	struct list_head   *item1, *item2, *_n;
+	struct i2c_client  *client;
+	struct i2c_adapter *adap;
+	
+	int res = 0;
+
+	down(&core_lists);
+
+	/* Have a look at each adapter, if clients of this driver are still
+	 * attached. If so, detach them to be able to kill the driver 
+	 * afterwards.
+	 */
+	pr_debug("i2c-core: unregister_driver - looking for clients.\n");
+	/* removing clients does not depend on the notify flag, else 
+	 * invalid operation might (will!) result, when using stale client
+	 * pointers.
+	 */
+	list_for_each(item1,&adapters) {
+		adap = list_entry(item1, struct i2c_adapter, list);
+		dev_dbg(&adap->dev, "examining adapter\n");
+		if (driver->detach_adapter) {
+			if ((res = driver->detach_adapter(adap))) {
+				dev_warn(&adap->dev, "while unregistering "
+				       "dummy driver %s, adapter could "
+				       "not be detached properly; driver "
+				       "not unloaded!",driver->name);
+				goto out_unlock;
+			}
+		} else {
+			list_for_each_safe(item2, _n, &adap->clients) {
+				client = list_entry(item2, struct i2c_client, list);
+				if (client->driver != driver)
+					continue;
+				pr_debug("i2c-core.o: detaching client %s:\n", client->name);
+				if ((res = driver->detach_client(client))) {
+					dev_err(&adap->dev, "while "
+						"unregistering driver "
+						"`%s', the client at "
+						"address %02x of "
+						"adapter could not "
+						"be detached; driver "
+						"not unloaded!",
+						driver->name,
+						client->addr);
+					goto out_unlock;
+				}
+			}
+		}
+	}
+
+	driver_unregister(&driver->driver);
+	list_del(&driver->list);
+	pr_debug("i2c-core: driver unregistered: %s\n", driver->name);
+
+ out_unlock:
+	up(&core_lists);
+	return 0;
+}
+
+static int __i2c_check_addr(struct i2c_adapter *adapter, unsigned int addr)
+{
+	struct list_head   *item;
+	struct i2c_client  *client;
+
+	list_for_each(item,&adapter->clients) {
+		client = list_entry(item, struct i2c_client, list);
+		if (client->addr == addr)
+			return -EBUSY;
+	}
+	return 0;
+}
+
+int i2c_check_addr(struct i2c_adapter *adapter, int addr)
+{
+	int rval;
+
+	down(&adapter->clist_lock);
+	rval = __i2c_check_addr(adapter, addr);
+	up(&adapter->clist_lock);
+
+	return rval;
+}
+
+int i2c_attach_client(struct i2c_client *client)
+{
+	struct i2c_adapter *adapter = client->adapter;
+
+	down(&adapter->clist_lock);
+	if (__i2c_check_addr(client->adapter, client->addr)) {
+		up(&adapter->clist_lock);
+		return -EBUSY;
+	}
+	list_add_tail(&client->list,&adapter->clients);
+	up(&adapter->clist_lock);
+	
+	if (adapter->client_register)  {
+		if (adapter->client_register(client))  {
+			dev_warn(&adapter->dev, "warning: client_register "
+				"seems to have failed for client %02x\n",
+				client->addr);
+		}
+	}
+
+	dev_dbg(&adapter->dev, "client [%s] registered to adapter\n",
+		client->name);
+
+	if (client->flags & I2C_CLIENT_ALLOW_USE)
+		client->usage_count = 0;
+
+	client->dev.parent = &client->adapter->dev;
+	client->dev.driver = &client->driver->driver;
+	client->dev.bus = &i2c_bus_type;
+	client->dev.release = &i2c_client_release;
+	
+	snprintf(&client->dev.bus_id[0], sizeof(client->dev.bus_id),
+		"%d-%04x", i2c_adapter_id(adapter), client->addr);
+	pr_debug("registering %s\n", client->dev.bus_id);
+	device_register(&client->dev);
+	device_create_file(&client->dev, &dev_attr_client_name);
+	
+	return 0;
+}
+
+
+int i2c_detach_client(struct i2c_client *client)
+{
+	struct i2c_adapter *adapter = client->adapter;
+	int res = 0;
+	
+	if ((client->flags & I2C_CLIENT_ALLOW_USE) && (client->usage_count > 0))
+		return -EBUSY;
+
+	if (adapter->client_unregister)  {
+		res = adapter->client_unregister(client);
+		if (res) {
+			dev_err(&client->dev,
+			       "client_unregister [%s] failed, "
+			       "client not detached", client->name);
+			goto out;
+		}
+	}
+
+	down(&adapter->clist_lock);
+	list_del(&client->list);
+	init_completion(&client->released);
+	device_remove_file(&client->dev, &dev_attr_client_name);
+	device_unregister(&client->dev);
+	up(&adapter->clist_lock);
+	wait_for_completion(&client->released);
+
+ out:
+	return res;
+}
+
+static int i2c_inc_use_client(struct i2c_client *client)
+{
+
+	if (!try_module_get(client->driver->owner))
+		return -ENODEV;
+	if (!try_module_get(client->adapter->owner)) {
+		module_put(client->driver->owner);
+		return -ENODEV;
+	}
+
+	return 0;
+}
+
+static void i2c_dec_use_client(struct i2c_client *client)
+{
+	module_put(client->driver->owner);
+	module_put(client->adapter->owner);
+}
+
+int i2c_use_client(struct i2c_client *client)
+{
+	int ret;
+
+	ret = i2c_inc_use_client(client);
+	if (ret)
+		return ret;
+
+	if (client->flags & I2C_CLIENT_ALLOW_USE) {
+		if (client->flags & I2C_CLIENT_ALLOW_MULTIPLE_USE)
+			client->usage_count++;
+		else if (client->usage_count > 0) 
+			goto busy;
+		else 
+			client->usage_count++;
+	}
+
+	return 0;
+ busy:
+	i2c_dec_use_client(client);
+	return -EBUSY;
+}
+
+int i2c_release_client(struct i2c_client *client)
+{
+	if(client->flags & I2C_CLIENT_ALLOW_USE) {
+		if(client->usage_count>0)
+			client->usage_count--;
+		else {
+			pr_debug("i2c-core: %s used one too many times\n",
+				__FUNCTION__);
+			return -EPERM;
+		}
+	}
+	
+	i2c_dec_use_client(client);
+	
+	return 0;
+}
+
+void i2c_clients_command(struct i2c_adapter *adap, unsigned int cmd, void *arg)
+{
+	struct list_head  *item;
+	struct i2c_client *client;
+
+	down(&adap->clist_lock);
+	list_for_each(item,&adap->clients) {
+		client = list_entry(item, struct i2c_client, list);
+		if (!try_module_get(client->driver->owner))
+			continue;
+		if (NULL != client->driver->command) {
+			up(&adap->clist_lock);
+			client->driver->command(client,cmd,arg);
+			down(&adap->clist_lock);
+		}
+		module_put(client->driver->owner);
+       }
+       up(&adap->clist_lock);
+}
+
+static int __init i2c_init(void)
+{
+	int retval;
+
+	retval = bus_register(&i2c_bus_type);
+	if (retval)
+		return retval;
+	retval = driver_register(&i2c_adapter_driver);
+	if (retval)
+		return retval;
+	return class_register(&i2c_adapter_class);
+}
+
+static void __exit i2c_exit(void)
+{
+	class_unregister(&i2c_adapter_class);
+	driver_unregister(&i2c_adapter_driver);
+	bus_unregister(&i2c_bus_type);
+}
+
+subsys_initcall(i2c_init);
+module_exit(i2c_exit);
+
+/* ----------------------------------------------------
+ * the functional interface to the i2c busses.
+ * ----------------------------------------------------
+ */
+
+int i2c_transfer(struct i2c_adapter * adap, struct i2c_msg *msgs, int num)
+{
+	int ret;
+
+	if (adap->algo->master_xfer) {
+#ifdef DEBUG
+		for (ret = 0; ret < num; ret++) {
+			dev_dbg(&adap->dev, "master_xfer[%d] %c, addr=0x%02x, "
+				"len=%d\n", ret, msgs[ret].flags & I2C_M_RD ?
+				'R' : 'W', msgs[ret].addr, msgs[ret].len);
+		}
+#endif
+
+		down(&adap->bus_lock);
+		ret = adap->algo->master_xfer(adap,msgs,num);
+		up(&adap->bus_lock);
+
+		return ret;
+	} else {
+		dev_dbg(&adap->dev, "I2C level transfers not supported\n");
+		return -ENOSYS;
+	}
+}
+
+int i2c_master_send(struct i2c_client *client,const char *buf ,int count)
+{
+	int ret;
+	struct i2c_adapter *adap=client->adapter;
+	struct i2c_msg msg;
+
+	if (client->adapter->algo->master_xfer) {
+		msg.addr   = client->addr;
+		msg.flags = client->flags & I2C_M_TEN;
+		msg.len = count;
+		msg.buf = (char *)buf;
+	
+		dev_dbg(&client->adapter->dev, "master_send: writing %d bytes.\n",
+			count);
+	
+		down(&adap->bus_lock);
+		ret = adap->algo->master_xfer(adap,&msg,1);
+		up(&adap->bus_lock);
+
+		/* if everything went ok (i.e. 1 msg transmitted), return #bytes
+		 * transmitted, else error code.
+		 */
+		return (ret == 1 )? count : ret;
+	} else {
+		dev_err(&client->adapter->dev, "I2C level transfers not supported\n");
+		return -ENOSYS;
+	}
+}
+
+int i2c_master_recv(struct i2c_client *client, char *buf ,int count)
+{
+	struct i2c_adapter *adap=client->adapter;
+	struct i2c_msg msg;
+	int ret;
+	if (client->adapter->algo->master_xfer) {
+		msg.addr   = client->addr;
+		msg.flags = client->flags & I2C_M_TEN;
+		msg.flags |= I2C_M_RD;
+		msg.len = count;
+		msg.buf = buf;
+
+		dev_dbg(&client->adapter->dev, "master_recv: reading %d bytes.\n",
+			count);
+	
+		down(&adap->bus_lock);
+		ret = adap->algo->master_xfer(adap,&msg,1);
+		up(&adap->bus_lock);
+	
+		dev_dbg(&client->adapter->dev, "master_recv: return:%d (count:%d, addr:0x%02x)\n",
+			ret, count, client->addr);
+	
+		/* if everything went ok (i.e. 1 msg transmitted), return #bytes
+	 	* transmitted, else error code.
+	 	*/
+		return (ret == 1 )? count : ret;
+	} else {
+		dev_err(&client->adapter->dev, "I2C level transfers not supported\n");
+		return -ENOSYS;
+	}
+}
+
+
+int i2c_control(struct i2c_client *client,
+	unsigned int cmd, unsigned long arg)
+{
+	int ret = 0;
+	struct i2c_adapter *adap = client->adapter;
+
+	dev_dbg(&client->adapter->dev, "i2c ioctl, cmd: 0x%x, arg: %#lx\n", cmd, arg);
+	switch (cmd) {
+		case I2C_RETRIES:
+			adap->retries = arg;
+			break;
+		case I2C_TIMEOUT:
+			adap->timeout = arg;
+			break;
+		default:
+			if (adap->algo->algo_control!=NULL)
+				ret = adap->algo->algo_control(adap,cmd,arg);
+	}
+	return ret;
+}
+
+/* ----------------------------------------------------
+ * the i2c address scanning function
+ * Will not work for 10-bit addresses!
+ * ----------------------------------------------------
+ */
+int i2c_probe(struct i2c_adapter *adapter,
+	      struct i2c_client_address_data *address_data,
+	      int (*found_proc) (struct i2c_adapter *, int, int))
+{
+	int addr,i,found,err;
+	int adap_id = i2c_adapter_id(adapter);
+
+	/* Forget it if we can't probe using SMBUS_QUICK */
+	if (! i2c_check_functionality(adapter,I2C_FUNC_SMBUS_QUICK))
+		return -1;
+
+	for (addr = 0x00; addr <= 0x7f; addr++) {
+
+		/* Skip if already in use */
+		if (i2c_check_addr(adapter,addr))
+			continue;
+
+		/* If it is in one of the force entries, we don't do any detection
+		   at all */
+		found = 0;
+
+		for (i = 0; !found && (address_data->force[i] != I2C_CLIENT_END); i += 2) {
+			if (((adap_id == address_data->force[i]) || 
+			     (address_data->force[i] == ANY_I2C_BUS)) &&
+			     (addr == address_data->force[i+1])) {
+				dev_dbg(&adapter->dev, "found force parameter for adapter %d, addr %04x\n",
+					adap_id, addr);
+				if ((err = found_proc(adapter,addr,0)))
+					return err;
+				found = 1;
+			}
+		}
+		if (found) 
+			continue;
+
+		/* If this address is in one of the ignores, we can forget about
+		   it right now */
+		for (i = 0;
+		     !found && (address_data->ignore[i] != I2C_CLIENT_END);
+		     i += 2) {
+			if (((adap_id == address_data->ignore[i]) || 
+			    ((address_data->ignore[i] == ANY_I2C_BUS))) &&
+			    (addr == address_data->ignore[i+1])) {
+				dev_dbg(&adapter->dev, "found ignore parameter for adapter %d, "
+					"addr %04x\n", adap_id ,addr);
+				found = 1;
+			}
+		}
+		for (i = 0;
+		     !found && (address_data->ignore_range[i] != I2C_CLIENT_END);
+		     i += 3) {
+			if (((adap_id == address_data->ignore_range[i]) ||
+			    ((address_data->ignore_range[i]==ANY_I2C_BUS))) &&
+			    (addr >= address_data->ignore_range[i+1]) &&
+			    (addr <= address_data->ignore_range[i+2])) {
+				dev_dbg(&adapter->dev, "found ignore_range parameter for adapter %d, "
+					"addr %04x\n", adap_id,addr);
+				found = 1;
+			}
+		}
+		if (found) 
+			continue;
+
+		/* Now, we will do a detection, but only if it is in the normal or 
+		   probe entries */  
+		for (i = 0;
+		     !found && (address_data->normal_i2c[i] != I2C_CLIENT_END);
+		     i += 1) {
+			if (addr == address_data->normal_i2c[i]) {
+				found = 1;
+				dev_dbg(&adapter->dev, "found normal i2c entry for adapter %d, "
+					"addr %02x\n", adap_id, addr);
+			}
+		}
+
+		for (i = 0;
+		     !found && (address_data->normal_i2c_range[i] != I2C_CLIENT_END);
+		     i += 2) {
+			if ((addr >= address_data->normal_i2c_range[i]) &&
+			    (addr <= address_data->normal_i2c_range[i+1])) {
+				found = 1;
+				dev_dbg(&adapter->dev, "found normal i2c_range entry for adapter %d, "
+					"addr %04x\n", adap_id,addr);
+			}
+		}
+
+		for (i = 0;
+		     !found && (address_data->probe[i] != I2C_CLIENT_END);
+		     i += 2) {
+			if (((adap_id == address_data->probe[i]) ||
+			    ((address_data->probe[i] == ANY_I2C_BUS))) &&
+			    (addr == address_data->probe[i+1])) {
+				found = 1;
+				dev_dbg(&adapter->dev, "found probe parameter for adapter %d, "
+					"addr %04x\n", adap_id,addr);
+			}
+		}
+		for (i = 0;
+		     !found && (address_data->probe_range[i] != I2C_CLIENT_END);
+		     i += 3) {
+			if (((adap_id == address_data->probe_range[i]) ||
+			   (address_data->probe_range[i] == ANY_I2C_BUS)) &&
+			   (addr >= address_data->probe_range[i+1]) &&
+			   (addr <= address_data->probe_range[i+2])) {
+				found = 1;
+				dev_dbg(&adapter->dev, "found probe_range parameter for adapter %d, "
+					"addr %04x\n", adap_id,addr);
+			}
+		}
+		if (!found) 
+			continue;
+
+		/* OK, so we really should examine this address. First check
+		   whether there is some client here at all! */
+		if (i2c_smbus_xfer(adapter,addr,0,0,0,I2C_SMBUS_QUICK,NULL) >= 0)
+			if ((err = found_proc(adapter,addr,-1)))
+				return err;
+	}
+	return 0;
+}
+
+/*
+ * return id number for a specific adapter
+ */
+int i2c_adapter_id(struct i2c_adapter *adap)
+{
+	return adap->nr;
+}
+
+struct i2c_adapter* i2c_get_adapter(int id)
+{
+	struct list_head   *item;
+	struct i2c_adapter *adapter;
+	
+	down(&core_lists);
+	list_for_each(item,&adapters) {
+		adapter = list_entry(item, struct i2c_adapter, list);
+		if (id == adapter->nr &&
+		    try_module_get(adapter->owner)) {
+			up(&core_lists);
+			return adapter;
+		}
+	}
+	up(&core_lists);
+	return NULL;
+}
+
+void i2c_put_adapter(struct i2c_adapter *adap)
+{
+	module_put(adap->owner);
+}
+
+/* The SMBus parts */
+
+#define POLY    (0x1070U << 3) 
+static u8
+crc8(u16 data)
+{
+	int i;
+  
+	for(i = 0; i < 8; i++) {
+		if (data & 0x8000) 
+			data = data ^ POLY;
+		data = data << 1;
+	}
+	return (u8)(data >> 8);
+}
+
+/* CRC over count bytes in the first array plus the bytes in the rest
+   array if it is non-null. rest[0] is the (length of rest) - 1
+   and is included. */
+static u8 i2c_smbus_partial_pec(u8 crc, int count, u8 *first, u8 *rest)
+{
+	int i;
+
+	for(i = 0; i < count; i++)
+		crc = crc8((crc ^ first[i]) << 8);
+	if(rest != NULL)
+		for(i = 0; i <= rest[0]; i++)
+			crc = crc8((crc ^ rest[i]) << 8);
+	return crc;
+}
+
+static u8 i2c_smbus_pec(int count, u8 *first, u8 *rest)
+{
+	return i2c_smbus_partial_pec(0, count, first, rest);
+}
+
+/* Returns new "size" (transaction type)
+   Note that we convert byte to byte_data and byte_data to word_data
+   rather than invent new xxx_PEC transactions. */
+static int i2c_smbus_add_pec(u16 addr, u8 command, int size,
+			     union i2c_smbus_data *data)
+{
+	u8 buf[3];
+
+	buf[0] = addr << 1;
+	buf[1] = command;
+	switch(size) {
+		case I2C_SMBUS_BYTE:
+			data->byte = i2c_smbus_pec(2, buf, NULL);
+			size = I2C_SMBUS_BYTE_DATA;
+			break;
+		case I2C_SMBUS_BYTE_DATA:
+			buf[2] = data->byte;
+			data->word = buf[2] ||
+			            (i2c_smbus_pec(3, buf, NULL) << 8);
+			size = I2C_SMBUS_WORD_DATA;
+			break;
+		case I2C_SMBUS_WORD_DATA:
+			/* unsupported */
+			break;
+		case I2C_SMBUS_BLOCK_DATA:
+			data->block[data->block[0] + 1] =
+			             i2c_smbus_pec(2, buf, data->block);
+			size = I2C_SMBUS_BLOCK_DATA_PEC;
+			break;
+	}
+	return size;	
+}
+
+static int i2c_smbus_check_pec(u16 addr, u8 command, int size, u8 partial,
+			       union i2c_smbus_data *data)
+{
+	u8 buf[3], rpec, cpec;
+
+	buf[1] = command;
+	switch(size) {
+		case I2C_SMBUS_BYTE_DATA:
+			buf[0] = (addr << 1) | 1;
+			cpec = i2c_smbus_pec(2, buf, NULL);
+			rpec = data->byte;
+			break;
+		case I2C_SMBUS_WORD_DATA:
+			buf[0] = (addr << 1) | 1;
+			buf[2] = data->word & 0xff;
+			cpec = i2c_smbus_pec(3, buf, NULL);
+			rpec = data->word >> 8;
+			break;
+		case I2C_SMBUS_WORD_DATA_PEC:
+			/* unsupported */
+			cpec = rpec = 0;
+			break;
+		case I2C_SMBUS_PROC_CALL_PEC:
+			/* unsupported */
+			cpec = rpec = 0;
+			break;
+		case I2C_SMBUS_BLOCK_DATA_PEC:
+			buf[0] = (addr << 1);
+			buf[2] = (addr << 1) | 1;
+			cpec = i2c_smbus_pec(3, buf, data->block);
+			rpec = data->block[data->block[0] + 1];
+			break;
+		case I2C_SMBUS_BLOCK_PROC_CALL_PEC:
+			buf[0] = (addr << 1) | 1;
+			rpec = i2c_smbus_partial_pec(partial, 1,
+			                             buf, data->block);
+			cpec = data->block[data->block[0] + 1];
+			break;
+		default:
+			cpec = rpec = 0;
+			break;
+	}
+	if (rpec != cpec) {
+		pr_debug("i2c-core: Bad PEC 0x%02x vs. 0x%02x\n",
+			rpec, cpec);
+		return -1;
+	}
+	return 0;	
+}
+
+s32 i2c_smbus_write_quick(struct i2c_client *client, u8 value)
+{
+	return i2c_smbus_xfer(client->adapter,client->addr,client->flags,
+ 	                      value,0,I2C_SMBUS_QUICK,NULL);
+}
+
+s32 i2c_smbus_read_byte(struct i2c_client *client)
+{
+	union i2c_smbus_data data;
+	if (i2c_smbus_xfer(client->adapter,client->addr,client->flags,
+	                   I2C_SMBUS_READ,0,I2C_SMBUS_BYTE, &data))
+		return -1;
+	else
+		return 0x0FF & data.byte;
+}
+
+s32 i2c_smbus_write_byte(struct i2c_client *client, u8 value)
+{
+	union i2c_smbus_data data;	/* only for PEC */
+	return i2c_smbus_xfer(client->adapter,client->addr,client->flags,
+	                      I2C_SMBUS_WRITE,value, I2C_SMBUS_BYTE,&data);
+}
+
+s32 i2c_smbus_read_byte_data(struct i2c_client *client, u8 command)
+{
+	union i2c_smbus_data data;
+	if (i2c_smbus_xfer(client->adapter,client->addr,client->flags,
+	                   I2C_SMBUS_READ,command, I2C_SMBUS_BYTE_DATA,&data))
+		return -1;
+	else
+		return 0x0FF & data.byte;
+}
+
+s32 i2c_smbus_write_byte_data(struct i2c_client *client, u8 command, u8 value)
+{
+	union i2c_smbus_data data;
+	data.byte = value;
+	return i2c_smbus_xfer(client->adapter,client->addr,client->flags,
+	                      I2C_SMBUS_WRITE,command,
+	                      I2C_SMBUS_BYTE_DATA,&data);
+}
+
+s32 i2c_smbus_read_word_data(struct i2c_client *client, u8 command)
+{
+	union i2c_smbus_data data;
+	if (i2c_smbus_xfer(client->adapter,client->addr,client->flags,
+	                   I2C_SMBUS_READ,command, I2C_SMBUS_WORD_DATA, &data))
+		return -1;
+	else
+		return 0x0FFFF & data.word;
+}
+
+s32 i2c_smbus_write_word_data(struct i2c_client *client, u8 command, u16 value)
+{
+	union i2c_smbus_data data;
+	data.word = value;
+	return i2c_smbus_xfer(client->adapter,client->addr,client->flags,
+	                      I2C_SMBUS_WRITE,command,
+	                      I2C_SMBUS_WORD_DATA,&data);
+}
+
+s32 i2c_smbus_write_block_data(struct i2c_client *client, u8 command,
+			       u8 length, u8 *values)
+{
+	union i2c_smbus_data data;
+	int i;
+	if (length > I2C_SMBUS_BLOCK_MAX)
+		length = I2C_SMBUS_BLOCK_MAX;
+	for (i = 1; i <= length; i++)
+		data.block[i] = values[i-1];
+	data.block[0] = length;
+	return i2c_smbus_xfer(client->adapter,client->addr,client->flags,
+			      I2C_SMBUS_WRITE,command,
+			      I2C_SMBUS_BLOCK_DATA,&data);
+}
+
+/* Returns the number of read bytes */
+s32 i2c_smbus_read_i2c_block_data(struct i2c_client *client, u8 command, u8 *values)
+{
+	union i2c_smbus_data data;
+	int i;
+	if (i2c_smbus_xfer(client->adapter,client->addr,client->flags,
+	                      I2C_SMBUS_READ,command,
+	                      I2C_SMBUS_I2C_BLOCK_DATA,&data))
+		return -1;
+	else {
+		for (i = 1; i <= data.block[0]; i++)
+			values[i-1] = data.block[i];
+		return data.block[0];
+	}
+}
+
+/* Simulate a SMBus command using the i2c protocol 
+   No checking of parameters is done!  */
+static s32 i2c_smbus_xfer_emulated(struct i2c_adapter * adapter, u16 addr, 
+                                   unsigned short flags,
+                                   char read_write, u8 command, int size, 
+                                   union i2c_smbus_data * data)
+{
+	/* So we need to generate a series of msgs. In the case of writing, we
+	  need to use only one message; when reading, we need two. We initialize
+	  most things with sane defaults, to keep the code below somewhat
+	  simpler. */
+	unsigned char msgbuf0[34];
+	unsigned char msgbuf1[34];
+	int num = read_write == I2C_SMBUS_READ?2:1;
+	struct i2c_msg msg[2] = { { addr, flags, 1, msgbuf0 }, 
+	                          { addr, flags | I2C_M_RD, 0, msgbuf1 }
+	                        };
+	int i;
+
+	msgbuf0[0] = command;
+	switch(size) {
+	case I2C_SMBUS_QUICK:
+		msg[0].len = 0;
+		/* Special case: The read/write field is used as data */
+		msg[0].flags = flags | (read_write==I2C_SMBUS_READ)?I2C_M_RD:0;
+		num = 1;
+		break;
+	case I2C_SMBUS_BYTE:
+		if (read_write == I2C_SMBUS_READ) {
+			/* Special case: only a read! */
+			msg[0].flags = I2C_M_RD | flags;
+			num = 1;
+		}
+		break;
+	case I2C_SMBUS_BYTE_DATA:
+		if (read_write == I2C_SMBUS_READ)
+			msg[1].len = 1;
+		else {
+			msg[0].len = 2;
+			msgbuf0[1] = data->byte;
+		}
+		break;
+	case I2C_SMBUS_WORD_DATA:
+		if (read_write == I2C_SMBUS_READ)
+			msg[1].len = 2;
+		else {
+			msg[0].len=3;
+			msgbuf0[1] = data->word & 0xff;
+			msgbuf0[2] = (data->word >> 8) & 0xff;
+		}
+		break;
+	case I2C_SMBUS_PROC_CALL:
+		num = 2; /* Special case */
+		read_write = I2C_SMBUS_READ;
+		msg[0].len = 3;
+		msg[1].len = 2;
+		msgbuf0[1] = data->word & 0xff;
+		msgbuf0[2] = (data->word >> 8) & 0xff;
+		break;
+	case I2C_SMBUS_BLOCK_DATA:
+	case I2C_SMBUS_BLOCK_DATA_PEC:
+		if (read_write == I2C_SMBUS_READ) {
+			dev_err(&adapter->dev, "Block read not supported "
+			       "under I2C emulation!\n");
+			return -1;
+		} else {
+			msg[0].len = data->block[0] + 2;
+			if (msg[0].len > I2C_SMBUS_BLOCK_MAX + 2) {
+				dev_err(&adapter->dev, "smbus_access called with "
+				       "invalid block write size (%d)\n",
+				       data->block[0]);
+				return -1;
+			}
+			if(size == I2C_SMBUS_BLOCK_DATA_PEC)
+				(msg[0].len)++;
+			for (i = 1; i <= msg[0].len; i++)
+				msgbuf0[i] = data->block[i-1];
+		}
+		break;
+	case I2C_SMBUS_BLOCK_PROC_CALL:
+	case I2C_SMBUS_BLOCK_PROC_CALL_PEC:
+		dev_dbg(&adapter->dev, "Block process call not supported "
+		       "under I2C emulation!\n");
+		return -1;
+	case I2C_SMBUS_I2C_BLOCK_DATA:
+		if (read_write == I2C_SMBUS_READ) {
+			msg[1].len = I2C_SMBUS_I2C_BLOCK_MAX;
+		} else {
+			msg[0].len = data->block[0] + 1;
+			if (msg[0].len > I2C_SMBUS_I2C_BLOCK_MAX + 1) {
+				dev_err(&adapter->dev, "i2c_smbus_xfer_emulated called with "
+				       "invalid block write size (%d)\n",
+				       data->block[0]);
+				return -1;
+			}
+			for (i = 1; i <= data->block[0]; i++)
+				msgbuf0[i] = data->block[i];
+		}
+		break;
+	default:
+		dev_err(&adapter->dev, "smbus_access called with invalid size (%d)\n",
+		       size);
+		return -1;
+	}
+
+	if (i2c_transfer(adapter, msg, num) < 0)
+		return -1;
+
+	if (read_write == I2C_SMBUS_READ)
+		switch(size) {
+			case I2C_SMBUS_BYTE:
+				data->byte = msgbuf0[0];
+				break;
+			case I2C_SMBUS_BYTE_DATA:
+				data->byte = msgbuf1[0];
+				break;
+			case I2C_SMBUS_WORD_DATA: 
+			case I2C_SMBUS_PROC_CALL:
+				data->word = msgbuf1[0] | (msgbuf1[1] << 8);
+				break;
+			case I2C_SMBUS_I2C_BLOCK_DATA:
+				/* fixed at 32 for now */
+				data->block[0] = I2C_SMBUS_I2C_BLOCK_MAX;
+				for (i = 0; i < I2C_SMBUS_I2C_BLOCK_MAX; i++)
+					data->block[i+1] = msgbuf1[i];
+				break;
+		}
+	return 0;
+}
+
+
+s32 i2c_smbus_xfer(struct i2c_adapter * adapter, u16 addr, unsigned short flags,
+                   char read_write, u8 command, int size, 
+                   union i2c_smbus_data * data)
+{
+	s32 res;
+	int swpec = 0;
+	u8 partial = 0;
+
+	flags &= I2C_M_TEN | I2C_CLIENT_PEC;
+	if((flags & I2C_CLIENT_PEC) &&
+	   !(i2c_check_functionality(adapter, I2C_FUNC_SMBUS_HWPEC_CALC))) {
+		swpec = 1;
+		if(read_write == I2C_SMBUS_READ &&
+		   size == I2C_SMBUS_BLOCK_DATA)
+			size = I2C_SMBUS_BLOCK_DATA_PEC;
+		else if(size == I2C_SMBUS_PROC_CALL)
+			size = I2C_SMBUS_PROC_CALL_PEC;
+		else if(size == I2C_SMBUS_BLOCK_PROC_CALL) {
+			i2c_smbus_add_pec(addr, command,
+		                          I2C_SMBUS_BLOCK_DATA, data);
+			partial = data->block[data->block[0] + 1];
+			size = I2C_SMBUS_BLOCK_PROC_CALL_PEC;
+		} else if(read_write == I2C_SMBUS_WRITE &&
+		          size != I2C_SMBUS_QUICK &&
+		          size != I2C_SMBUS_I2C_BLOCK_DATA)
+			size = i2c_smbus_add_pec(addr, command, size, data);
+	}
+
+	if (adapter->algo->smbus_xfer) {
+		down(&adapter->bus_lock);
+		res = adapter->algo->smbus_xfer(adapter,addr,flags,read_write,
+		                                command,size,data);
+		up(&adapter->bus_lock);
+	} else
+		res = i2c_smbus_xfer_emulated(adapter,addr,flags,read_write,
+	                                      command,size,data);
+
+	if(res >= 0 && swpec &&
+	   size != I2C_SMBUS_QUICK && size != I2C_SMBUS_I2C_BLOCK_DATA &&
+	   (read_write == I2C_SMBUS_READ || size == I2C_SMBUS_PROC_CALL_PEC ||
+	    size == I2C_SMBUS_BLOCK_PROC_CALL_PEC)) {
+		if(i2c_smbus_check_pec(addr, command, size, partial, data))
+			return -1;
+	}
+	return res;
+}
+
+
+EXPORT_SYMBOL(i2c_add_adapter);
+EXPORT_SYMBOL(i2c_del_adapter);
+EXPORT_SYMBOL(i2c_add_driver);
+EXPORT_SYMBOL(i2c_del_driver);
+EXPORT_SYMBOL(i2c_attach_client);
+EXPORT_SYMBOL(i2c_detach_client);
+EXPORT_SYMBOL(i2c_use_client);
+EXPORT_SYMBOL(i2c_release_client);
+EXPORT_SYMBOL(i2c_clients_command);
+EXPORT_SYMBOL(i2c_check_addr);
+
+EXPORT_SYMBOL(i2c_master_send);
+EXPORT_SYMBOL(i2c_master_recv);
+EXPORT_SYMBOL(i2c_control);
+EXPORT_SYMBOL(i2c_transfer);
+EXPORT_SYMBOL(i2c_adapter_id);
+EXPORT_SYMBOL(i2c_get_adapter);
+EXPORT_SYMBOL(i2c_put_adapter);
+EXPORT_SYMBOL(i2c_probe);
+
+EXPORT_SYMBOL(i2c_smbus_xfer);
+EXPORT_SYMBOL(i2c_smbus_write_quick);
+EXPORT_SYMBOL(i2c_smbus_read_byte);
+EXPORT_SYMBOL(i2c_smbus_write_byte);
+EXPORT_SYMBOL(i2c_smbus_read_byte_data);
+EXPORT_SYMBOL(i2c_smbus_write_byte_data);
+EXPORT_SYMBOL(i2c_smbus_read_word_data);
+EXPORT_SYMBOL(i2c_smbus_write_word_data);
+EXPORT_SYMBOL(i2c_smbus_write_block_data);
+EXPORT_SYMBOL(i2c_smbus_read_i2c_block_data);
+
+MODULE_AUTHOR("Simon G. Vogl <simon@tk.uni-linz.ac.at>");
+MODULE_DESCRIPTION("I2C-Bus main module");
+MODULE_LICENSE("GPL");
diff --git a/drivers/i2c/i2c-dev.c b/drivers/i2c/i2c-dev.c
new file mode 100644
index 00000000000..86c4d0149e8
--- /dev/null
+++ b/drivers/i2c/i2c-dev.c
@@ -0,0 +1,552 @@
+/*
+    i2c-dev.c - i2c-bus driver, char device interface  
+
+    Copyright (C) 1995-97 Simon G. Vogl
+    Copyright (C) 1998-99 Frodo Looijaard <frodol@dds.nl>
+    Copyright (C) 2003 Greg Kroah-Hartman <greg@kroah.com>
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+/* Note that this is a complete rewrite of Simon Vogl's i2c-dev module.
+   But I have used so much of his original code and ideas that it seems
+   only fair to recognize him as co-author -- Frodo */
+
+/* The I2C_RDWR ioctl code is written by Kolja Waschk <waschk@telos.de> */
+
+/* The devfs code is contributed by Philipp Matthias Hahn 
+   <pmhahn@titan.lahn.de> */
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/fs.h>
+#include <linux/slab.h>
+#include <linux/smp_lock.h>
+#include <linux/devfs_fs_kernel.h>
+#include <linux/init.h>
+#include <linux/i2c.h>
+#include <linux/i2c-dev.h>
+#include <asm/uaccess.h>
+
+static struct i2c_client i2cdev_client_template;
+
+struct i2c_dev {
+	int minor;
+	struct i2c_adapter *adap;
+	struct class_device class_dev;
+	struct completion released;	/* FIXME, we need a class_device_unregister() */
+};
+#define to_i2c_dev(d) container_of(d, struct i2c_dev, class_dev)
+
+#define I2C_MINORS	256
+static struct i2c_dev *i2c_dev_array[I2C_MINORS];
+static DEFINE_SPINLOCK(i2c_dev_array_lock);
+
+static struct i2c_dev *i2c_dev_get_by_minor(unsigned index)
+{
+	struct i2c_dev *i2c_dev;
+
+	spin_lock(&i2c_dev_array_lock);
+	i2c_dev = i2c_dev_array[index];
+	spin_unlock(&i2c_dev_array_lock);
+	return i2c_dev;
+}
+
+static struct i2c_dev *i2c_dev_get_by_adapter(struct i2c_adapter *adap)
+{
+	struct i2c_dev *i2c_dev = NULL;
+
+	spin_lock(&i2c_dev_array_lock);
+	if ((i2c_dev_array[adap->nr]) &&
+	    (i2c_dev_array[adap->nr]->adap == adap))
+		i2c_dev = i2c_dev_array[adap->nr];
+	spin_unlock(&i2c_dev_array_lock);
+	return i2c_dev;
+}
+
+static struct i2c_dev *get_free_i2c_dev(struct i2c_adapter *adap)
+{
+	struct i2c_dev *i2c_dev;
+
+	i2c_dev = kmalloc(sizeof(*i2c_dev), GFP_KERNEL);
+	if (!i2c_dev)
+		return ERR_PTR(-ENOMEM);
+	memset(i2c_dev, 0x00, sizeof(*i2c_dev));
+
+	spin_lock(&i2c_dev_array_lock);
+	if (i2c_dev_array[adap->nr]) {
+		spin_unlock(&i2c_dev_array_lock);
+		dev_err(&adap->dev, "i2c-dev already has a device assigned to this adapter\n");
+		goto error;
+	}
+	i2c_dev->minor = adap->nr;
+	i2c_dev_array[adap->nr] = i2c_dev;
+	spin_unlock(&i2c_dev_array_lock);
+	return i2c_dev;
+error:
+	kfree(i2c_dev);
+	return ERR_PTR(-ENODEV);
+}
+
+static void return_i2c_dev(struct i2c_dev *i2c_dev)
+{
+	spin_lock(&i2c_dev_array_lock);
+	i2c_dev_array[i2c_dev->minor] = NULL;
+	spin_unlock(&i2c_dev_array_lock);
+}
+
+static ssize_t show_adapter_name(struct class_device *class_dev, char *buf)
+{
+	struct i2c_dev *i2c_dev = to_i2c_dev(class_dev);
+	return sprintf(buf, "%s\n", i2c_dev->adap->name);
+}
+static CLASS_DEVICE_ATTR(name, S_IRUGO, show_adapter_name, NULL);
+
+static ssize_t i2cdev_read (struct file *file, char __user *buf, size_t count,
+                            loff_t *offset)
+{
+	char *tmp;
+	int ret;
+
+	struct i2c_client *client = (struct i2c_client *)file->private_data;
+
+	if (count > 8192)
+		count = 8192;
+
+	tmp = kmalloc(count,GFP_KERNEL);
+	if (tmp==NULL)
+		return -ENOMEM;
+
+	pr_debug("i2c-dev: i2c-%d reading %zd bytes.\n",
+		iminor(file->f_dentry->d_inode), count);
+
+	ret = i2c_master_recv(client,tmp,count);
+	if (ret >= 0)
+		ret = copy_to_user(buf,tmp,count)?-EFAULT:ret;
+	kfree(tmp);
+	return ret;
+}
+
+static ssize_t i2cdev_write (struct file *file, const char __user *buf, size_t count,
+                             loff_t *offset)
+{
+	int ret;
+	char *tmp;
+	struct i2c_client *client = (struct i2c_client *)file->private_data;
+
+	if (count > 8192)
+		count = 8192;
+
+	tmp = kmalloc(count,GFP_KERNEL);
+	if (tmp==NULL)
+		return -ENOMEM;
+	if (copy_from_user(tmp,buf,count)) {
+		kfree(tmp);
+		return -EFAULT;
+	}
+
+	pr_debug("i2c-dev: i2c-%d writing %zd bytes.\n",
+		iminor(file->f_dentry->d_inode), count);
+
+	ret = i2c_master_send(client,tmp,count);
+	kfree(tmp);
+	return ret;
+}
+
+static int i2cdev_ioctl(struct inode *inode, struct file *file,
+		unsigned int cmd, unsigned long arg)
+{
+	struct i2c_client *client = (struct i2c_client *)file->private_data;
+	struct i2c_rdwr_ioctl_data rdwr_arg;
+	struct i2c_smbus_ioctl_data data_arg;
+	union i2c_smbus_data temp;
+	struct i2c_msg *rdwr_pa;
+	u8 __user **data_ptrs;
+	int i,datasize,res;
+	unsigned long funcs;
+
+	dev_dbg(&client->adapter->dev, "i2c-%d ioctl, cmd: 0x%x, arg: %lx.\n",
+		iminor(inode),cmd, arg);
+
+	switch ( cmd ) {
+	case I2C_SLAVE:
+	case I2C_SLAVE_FORCE:
+		if ((arg > 0x3ff) || 
+		    (((client->flags & I2C_M_TEN) == 0) && arg > 0x7f))
+			return -EINVAL;
+		if ((cmd == I2C_SLAVE) && i2c_check_addr(client->adapter,arg))
+			return -EBUSY;
+		client->addr = arg;
+		return 0;
+	case I2C_TENBIT:
+		if (arg)
+			client->flags |= I2C_M_TEN;
+		else
+			client->flags &= ~I2C_M_TEN;
+		return 0;
+	case I2C_PEC:
+		if (arg)
+			client->flags |= I2C_CLIENT_PEC;
+		else
+			client->flags &= ~I2C_CLIENT_PEC;
+		return 0;
+	case I2C_FUNCS:
+		funcs = i2c_get_functionality(client->adapter);
+		return (copy_to_user((unsigned long __user *)arg, &funcs,
+		                     sizeof(unsigned long)))?-EFAULT:0;
+
+	case I2C_RDWR:
+		if (copy_from_user(&rdwr_arg, 
+				   (struct i2c_rdwr_ioctl_data __user *)arg, 
+				   sizeof(rdwr_arg)))
+			return -EFAULT;
+
+		/* Put an arbritrary limit on the number of messages that can
+		 * be sent at once */
+		if (rdwr_arg.nmsgs > I2C_RDRW_IOCTL_MAX_MSGS)
+			return -EINVAL;
+		
+		rdwr_pa = (struct i2c_msg *)
+			kmalloc(rdwr_arg.nmsgs * sizeof(struct i2c_msg), 
+			GFP_KERNEL);
+
+		if (rdwr_pa == NULL) return -ENOMEM;
+
+		if (copy_from_user(rdwr_pa, rdwr_arg.msgs,
+				   rdwr_arg.nmsgs * sizeof(struct i2c_msg))) {
+			kfree(rdwr_pa);
+			return -EFAULT;
+		}
+
+		data_ptrs = kmalloc(rdwr_arg.nmsgs * sizeof(u8 __user *), GFP_KERNEL);
+		if (data_ptrs == NULL) {
+			kfree(rdwr_pa);
+			return -ENOMEM;
+		}
+
+		res = 0;
+		for( i=0; i<rdwr_arg.nmsgs; i++ ) {
+			/* Limit the size of the message to a sane amount */
+			if (rdwr_pa[i].len > 8192) {
+				res = -EINVAL;
+				break;
+			}
+			data_ptrs[i] = (u8 __user *)rdwr_pa[i].buf;
+			rdwr_pa[i].buf = kmalloc(rdwr_pa[i].len, GFP_KERNEL);
+			if(rdwr_pa[i].buf == NULL) {
+				res = -ENOMEM;
+				break;
+			}
+			if(copy_from_user(rdwr_pa[i].buf,
+				data_ptrs[i],
+				rdwr_pa[i].len)) {
+					++i; /* Needs to be kfreed too */
+					res = -EFAULT;
+				break;
+			}
+		}
+		if (res < 0) {
+			int j;
+			for (j = 0; j < i; ++j)
+				kfree(rdwr_pa[j].buf);
+			kfree(data_ptrs);
+			kfree(rdwr_pa);
+			return res;
+		}
+
+		res = i2c_transfer(client->adapter,
+			rdwr_pa,
+			rdwr_arg.nmsgs);
+		while(i-- > 0) {
+			if( res>=0 && (rdwr_pa[i].flags & I2C_M_RD)) {
+				if(copy_to_user(
+					data_ptrs[i],
+					rdwr_pa[i].buf,
+					rdwr_pa[i].len)) {
+					res = -EFAULT;
+				}
+			}
+			kfree(rdwr_pa[i].buf);
+		}
+		kfree(data_ptrs);
+		kfree(rdwr_pa);
+		return res;
+
+	case I2C_SMBUS:
+		if (copy_from_user(&data_arg,
+		                   (struct i2c_smbus_ioctl_data __user *) arg,
+		                   sizeof(struct i2c_smbus_ioctl_data)))
+			return -EFAULT;
+		if ((data_arg.size != I2C_SMBUS_BYTE) && 
+		    (data_arg.size != I2C_SMBUS_QUICK) &&
+		    (data_arg.size != I2C_SMBUS_BYTE_DATA) && 
+		    (data_arg.size != I2C_SMBUS_WORD_DATA) &&
+		    (data_arg.size != I2C_SMBUS_PROC_CALL) &&
+		    (data_arg.size != I2C_SMBUS_BLOCK_DATA) &&
+		    (data_arg.size != I2C_SMBUS_I2C_BLOCK_DATA) &&
+		    (data_arg.size != I2C_SMBUS_BLOCK_PROC_CALL)) {
+			dev_dbg(&client->adapter->dev,
+				"size out of range (%x) in ioctl I2C_SMBUS.\n",
+				data_arg.size);
+			return -EINVAL;
+		}
+		/* Note that I2C_SMBUS_READ and I2C_SMBUS_WRITE are 0 and 1, 
+		   so the check is valid if size==I2C_SMBUS_QUICK too. */
+		if ((data_arg.read_write != I2C_SMBUS_READ) && 
+		    (data_arg.read_write != I2C_SMBUS_WRITE)) {
+			dev_dbg(&client->adapter->dev, 
+				"read_write out of range (%x) in ioctl I2C_SMBUS.\n",
+				data_arg.read_write);
+			return -EINVAL;
+		}
+
+		/* Note that command values are always valid! */
+
+		if ((data_arg.size == I2C_SMBUS_QUICK) ||
+		    ((data_arg.size == I2C_SMBUS_BYTE) && 
+		    (data_arg.read_write == I2C_SMBUS_WRITE)))
+			/* These are special: we do not use data */
+			return i2c_smbus_xfer(client->adapter, client->addr,
+					      client->flags,
+					      data_arg.read_write,
+					      data_arg.command,
+					      data_arg.size, NULL);
+
+		if (data_arg.data == NULL) {
+			dev_dbg(&client->adapter->dev,
+				"data is NULL pointer in ioctl I2C_SMBUS.\n");
+			return -EINVAL;
+		}
+
+		if ((data_arg.size == I2C_SMBUS_BYTE_DATA) ||
+		    (data_arg.size == I2C_SMBUS_BYTE))
+			datasize = sizeof(data_arg.data->byte);
+		else if ((data_arg.size == I2C_SMBUS_WORD_DATA) || 
+		         (data_arg.size == I2C_SMBUS_PROC_CALL))
+			datasize = sizeof(data_arg.data->word);
+		else /* size == smbus block, i2c block, or block proc. call */
+			datasize = sizeof(data_arg.data->block);
+
+		if ((data_arg.size == I2C_SMBUS_PROC_CALL) || 
+		    (data_arg.size == I2C_SMBUS_BLOCK_PROC_CALL) || 
+		    (data_arg.read_write == I2C_SMBUS_WRITE)) {
+			if (copy_from_user(&temp, data_arg.data, datasize))
+				return -EFAULT;
+		}
+		res = i2c_smbus_xfer(client->adapter,client->addr,client->flags,
+		      data_arg.read_write,
+		      data_arg.command,data_arg.size,&temp);
+		if (! res && ((data_arg.size == I2C_SMBUS_PROC_CALL) || 
+		              (data_arg.size == I2C_SMBUS_BLOCK_PROC_CALL) || 
+			      (data_arg.read_write == I2C_SMBUS_READ))) {
+			if (copy_to_user(data_arg.data, &temp, datasize))
+				return -EFAULT;
+		}
+		return res;
+
+	default:
+		return i2c_control(client,cmd,arg);
+	}
+	return 0;
+}
+
+static int i2cdev_open(struct inode *inode, struct file *file)
+{
+	unsigned int minor = iminor(inode);
+	struct i2c_client *client;
+	struct i2c_adapter *adap;
+	struct i2c_dev *i2c_dev;
+
+	i2c_dev = i2c_dev_get_by_minor(minor);
+	if (!i2c_dev)
+		return -ENODEV;
+
+	adap = i2c_get_adapter(i2c_dev->adap->nr);
+	if (!adap)
+		return -ENODEV;
+
+	client = kmalloc(sizeof(*client), GFP_KERNEL);
+	if (!client) {
+		i2c_put_adapter(adap);
+		return -ENOMEM;
+	}
+	memcpy(client, &i2cdev_client_template, sizeof(*client));
+
+	/* registered with adapter, passed as client to user */
+	client->adapter = adap;
+	file->private_data = client;
+
+	return 0;
+}
+
+static int i2cdev_release(struct inode *inode, struct file *file)
+{
+	struct i2c_client *client = file->private_data;
+
+	i2c_put_adapter(client->adapter);
+	kfree(client);
+	file->private_data = NULL;
+
+	return 0;
+}
+
+static struct file_operations i2cdev_fops = {
+	.owner		= THIS_MODULE,
+	.llseek		= no_llseek,
+	.read		= i2cdev_read,
+	.write		= i2cdev_write,
+	.ioctl		= i2cdev_ioctl,
+	.open		= i2cdev_open,
+	.release	= i2cdev_release,
+};
+
+static void release_i2c_dev(struct class_device *dev)
+{
+	struct i2c_dev *i2c_dev = to_i2c_dev(dev);
+	complete(&i2c_dev->released);
+}
+
+static struct class i2c_dev_class = {
+	.name		= "i2c-dev",
+	.release	= &release_i2c_dev,
+};
+
+static int i2cdev_attach_adapter(struct i2c_adapter *adap)
+{
+	struct i2c_dev *i2c_dev;
+	int retval;
+
+	i2c_dev = get_free_i2c_dev(adap);
+	if (IS_ERR(i2c_dev))
+		return PTR_ERR(i2c_dev);
+
+	devfs_mk_cdev(MKDEV(I2C_MAJOR, i2c_dev->minor),
+			S_IFCHR|S_IRUSR|S_IWUSR, "i2c/%d", i2c_dev->minor);
+	dev_dbg(&adap->dev, "Registered as minor %d\n", i2c_dev->minor);
+
+	/* register this i2c device with the driver core */
+	i2c_dev->adap = adap;
+	if (adap->dev.parent == &platform_bus)
+		i2c_dev->class_dev.dev = &adap->dev;
+	else
+		i2c_dev->class_dev.dev = adap->dev.parent;
+	i2c_dev->class_dev.class = &i2c_dev_class;
+	i2c_dev->class_dev.devt = MKDEV(I2C_MAJOR, i2c_dev->minor);
+	snprintf(i2c_dev->class_dev.class_id, BUS_ID_SIZE, "i2c-%d", i2c_dev->minor);
+	retval = class_device_register(&i2c_dev->class_dev);
+	if (retval)
+		goto error;
+	class_device_create_file(&i2c_dev->class_dev, &class_device_attr_name);
+	return 0;
+error:
+	return_i2c_dev(i2c_dev);
+	kfree(i2c_dev);
+	return retval;
+}
+
+static int i2cdev_detach_adapter(struct i2c_adapter *adap)
+{
+	struct i2c_dev *i2c_dev;
+
+	i2c_dev = i2c_dev_get_by_adapter(adap);
+	if (!i2c_dev)
+		return -ENODEV;
+
+	init_completion(&i2c_dev->released);
+	devfs_remove("i2c/%d", i2c_dev->minor);
+	return_i2c_dev(i2c_dev);
+	class_device_unregister(&i2c_dev->class_dev);
+	wait_for_completion(&i2c_dev->released);
+	kfree(i2c_dev);
+
+	dev_dbg(&adap->dev, "Adapter unregistered\n");
+	return 0;
+}
+
+static int i2cdev_detach_client(struct i2c_client *client)
+{
+	return 0;
+}
+
+static int i2cdev_command(struct i2c_client *client, unsigned int cmd,
+                           void *arg)
+{
+	return -1;
+}
+
+static struct i2c_driver i2cdev_driver = {
+	.owner		= THIS_MODULE,
+	.name		= "dev_driver",
+	.id		= I2C_DRIVERID_I2CDEV,
+	.flags		= I2C_DF_NOTIFY,
+	.attach_adapter	= i2cdev_attach_adapter,
+	.detach_adapter	= i2cdev_detach_adapter,
+	.detach_client	= i2cdev_detach_client,
+	.command	= i2cdev_command,
+};
+
+static struct i2c_client i2cdev_client_template = {
+	.name		= "I2C /dev entry",
+	.addr		= -1,
+	.driver		= &i2cdev_driver,
+};
+
+static int __init i2c_dev_init(void)
+{
+	int res;
+
+	printk(KERN_INFO "i2c /dev entries driver\n");
+
+	res = register_chrdev(I2C_MAJOR, "i2c", &i2cdev_fops);
+	if (res)
+		goto out;
+
+	res = class_register(&i2c_dev_class);
+	if (res)
+		goto out_unreg_chrdev;
+
+	res = i2c_add_driver(&i2cdev_driver);
+	if (res)
+		goto out_unreg_class;
+
+	devfs_mk_dir("i2c");
+
+	return 0;
+
+out_unreg_class:
+	class_unregister(&i2c_dev_class);
+out_unreg_chrdev:
+	unregister_chrdev(I2C_MAJOR, "i2c");
+out:
+	printk(KERN_ERR "%s: Driver Initialisation failed\n", __FILE__);
+	return res;
+}
+
+static void __exit i2c_dev_exit(void)
+{
+	i2c_del_driver(&i2cdev_driver);
+	class_unregister(&i2c_dev_class);
+	devfs_remove("i2c");
+	unregister_chrdev(I2C_MAJOR,"i2c");
+}
+
+MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl> and "
+		"Simon G. Vogl <simon@tk.uni-linz.ac.at>");
+MODULE_DESCRIPTION("I2C /dev entries driver");
+MODULE_LICENSE("GPL");
+
+module_init(i2c_dev_init);
+module_exit(i2c_dev_exit);
diff --git a/drivers/i2c/i2c-sensor-detect.c b/drivers/i2c/i2c-sensor-detect.c
new file mode 100644
index 00000000000..f99a8161a9f
--- /dev/null
+++ b/drivers/i2c/i2c-sensor-detect.c
@@ -0,0 +1,145 @@
+/*
+    i2c-sensor-detect.c - Part of lm_sensors, Linux kernel modules for hardware
+            		  monitoring
+    Copyright (c) 1998 - 2001 Frodo Looijaard <frodol@dds.nl> and
+    Mark D. Studebaker <mdsxyz123@yahoo.com>
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/i2c.h>
+#include <linux/i2c-sensor.h>
+
+static unsigned short empty[] = {I2C_CLIENT_END};
+static unsigned int empty_isa[] = {I2C_CLIENT_ISA_END};
+
+/* Very inefficient for ISA detects, and won't work for 10-bit addresses! */
+int i2c_detect(struct i2c_adapter *adapter,
+	       struct i2c_address_data *address_data,
+	       int (*found_proc) (struct i2c_adapter *, int, int))
+{
+	int addr, i, found, j, err;
+	struct i2c_force_data *this_force;
+	int is_isa = i2c_is_isa_adapter(adapter);
+	int adapter_id =
+	    is_isa ? ANY_I2C_ISA_BUS : i2c_adapter_id(adapter);
+	unsigned short *normal_i2c;
+	unsigned int *normal_isa;
+	unsigned short *probe;
+	unsigned short *ignore;
+
+	/* Forget it if we can't probe using SMBUS_QUICK */
+	if ((!is_isa) &&
+	    !i2c_check_functionality(adapter, I2C_FUNC_SMBUS_QUICK))
+		return -1;
+	
+	/* Use default "empty" list if the adapter doesn't specify any */
+	normal_i2c = probe = ignore = empty;
+	normal_isa = empty_isa;
+	if (address_data->normal_i2c)
+		normal_i2c = address_data->normal_i2c;
+	if (address_data->normal_isa)
+		normal_isa = address_data->normal_isa;
+	if (address_data->probe)
+		probe = address_data->probe;
+	if (address_data->ignore)
+		ignore = address_data->ignore;
+
+	for (addr = 0x00; addr <= (is_isa ? 0xffff : 0x7f); addr++) {
+		if (!is_isa && i2c_check_addr(adapter, addr))
+			continue;
+
+		/* If it is in one of the force entries, we don't do any
+		   detection at all */
+		found = 0;
+		for (i = 0; !found && (this_force = address_data->forces + i, this_force->force); i++) {
+			for (j = 0; !found && (this_force->force[j] != I2C_CLIENT_END); j += 2) {
+				if ( ((adapter_id == this_force->force[j]) ||
+				      ((this_force->force[j] == ANY_I2C_BUS) && !is_isa)) &&
+				      (addr == this_force->force[j + 1]) ) {
+					dev_dbg(&adapter->dev, "found force parameter for adapter %d, addr %04x\n", adapter_id, addr);
+					if ((err = found_proc(adapter, addr, this_force->kind)))
+						return err;
+					found = 1;
+				}
+			}
+		}
+		if (found)
+			continue;
+
+		/* If this address is in one of the ignores, we can forget about it
+		   right now */
+		for (i = 0; !found && (ignore[i] != I2C_CLIENT_END); i += 2) {
+			if ( ((adapter_id == ignore[i]) ||
+			      ((ignore[i] == ANY_I2C_BUS) &&
+			       !is_isa)) &&
+			      (addr == ignore[i + 1])) {
+				dev_dbg(&adapter->dev, "found ignore parameter for adapter %d, addr %04x\n", adapter_id, addr);
+				found = 1;
+			}
+		}
+		if (found)
+			continue;
+
+		/* Now, we will do a detection, but only if it is in the normal or 
+		   probe entries */
+		if (is_isa) {
+			for (i = 0; !found && (normal_isa[i] != I2C_CLIENT_ISA_END); i += 1) {
+				if (addr == normal_isa[i]) {
+					dev_dbg(&adapter->dev, "found normal isa entry for adapter %d, addr %04x\n", adapter_id, addr);
+					found = 1;
+				}
+			}
+		} else {
+			for (i = 0; !found && (normal_i2c[i] != I2C_CLIENT_END); i += 1) {
+				if (addr == normal_i2c[i]) {
+					found = 1;
+					dev_dbg(&adapter->dev, "found normal i2c entry for adapter %d, addr %02x\n", adapter_id, addr);
+				}
+			}
+		}
+
+		for (i = 0;
+		     !found && (probe[i] != I2C_CLIENT_END);
+		     i += 2) {
+			if (((adapter_id == probe[i]) ||
+			     ((probe[i] == ANY_I2C_BUS) && !is_isa))
+			    && (addr == probe[i + 1])) {
+				dev_dbg(&adapter->dev, "found probe parameter for adapter %d, addr %04x\n", adapter_id, addr);
+				found = 1;
+			}
+		}
+		if (!found)
+			continue;
+
+		/* OK, so we really should examine this address. First check
+		   whether there is some client here at all! */
+		if (is_isa ||
+		    (i2c_smbus_xfer (adapter, addr, 0, 0, 0, I2C_SMBUS_QUICK, NULL) >= 0))
+			if ((err = found_proc(adapter, addr, -1)))
+				return err;
+	}
+	return 0;
+}
+
+EXPORT_SYMBOL(i2c_detect);
+
+MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl>, "
+	      "Rudolf Marek <r.marek@sh.cvut.cz>");
+
+MODULE_DESCRIPTION("i2c-sensor driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/i2c/i2c-sensor-vid.c b/drivers/i2c/i2c-sensor-vid.c
new file mode 100644
index 00000000000..922e22f054b
--- /dev/null
+++ b/drivers/i2c/i2c-sensor-vid.c
@@ -0,0 +1,98 @@
+/*
+    i2c-sensor-vid.c -  Part of lm_sensors, Linux kernel modules for hardware
+        		monitoring
+
+    Copyright (c) 2004 Rudolf Marek <r.marek@sh.cvut.cz>
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+
+struct vrm_model {
+	u8 vendor;
+	u8 eff_family;
+	u8 eff_model;
+	int vrm_type;
+};
+
+#define ANY 0xFF
+
+#ifdef CONFIG_X86
+
+static struct vrm_model vrm_models[] = {
+	{X86_VENDOR_AMD, 0x6, ANY, 90},		/* Athlon Duron etc */
+	{X86_VENDOR_AMD, 0xF, ANY, 24},		/* Athlon 64, Opteron */
+	{X86_VENDOR_INTEL, 0x6, 0x9, 85},	/* 0.13um too */
+	{X86_VENDOR_INTEL, 0x6, 0xB, 85},	/* 0xB Tualatin */
+	{X86_VENDOR_INTEL, 0x6, ANY, 82},	/* any P6 */
+	{X86_VENDOR_INTEL, 0x7, ANY, 0},	/* Itanium */
+	{X86_VENDOR_INTEL, 0xF, 0x3, 100},	/* P4 Prescott */
+	{X86_VENDOR_INTEL, 0xF, ANY, 90},	/* P4 before Prescott */
+	{X86_VENDOR_INTEL, 0x10,ANY, 0},	/* Itanium 2 */
+	{X86_VENDOR_UNKNOWN, ANY, ANY, 0}	/* stop here */
+	};
+
+static int find_vrm(u8 eff_family, u8 eff_model, u8 vendor)
+{
+	int i = 0;
+
+	while (vrm_models[i].vendor!=X86_VENDOR_UNKNOWN) {
+		if (vrm_models[i].vendor==vendor)
+			if ((vrm_models[i].eff_family==eff_family)&& \
+			((vrm_models[i].eff_model==eff_model)|| \
+			(vrm_models[i].eff_model==ANY)))
+				return vrm_models[i].vrm_type;
+		i++;
+	}
+
+	return 0;
+}
+
+int i2c_which_vrm(void)
+{
+	struct cpuinfo_x86 *c = cpu_data;
+	u32 eax;
+	u8 eff_family, eff_model;
+	int vrm_ret;
+
+	if (c->x86 < 6) return 0;	/* any CPU with familly lower than 6
+				 	dont have VID and/or CPUID */
+	eax = cpuid_eax(1);
+	eff_family = ((eax & 0x00000F00)>>8);
+	eff_model  = ((eax & 0x000000F0)>>4);
+	if (eff_family == 0xF) {	/* use extended model & family */
+		eff_family += ((eax & 0x00F00000)>>20);
+		eff_model += ((eax & 0x000F0000)>>16)<<4;
+	}
+	vrm_ret = find_vrm(eff_family,eff_model,c->x86_vendor);
+	if (vrm_ret == 0)
+		printk(KERN_INFO "i2c-sensor.o: Unknown VRM version of your"
+		" x86 CPU\n");
+	return vrm_ret;
+}
+
+/* and now for something completely different for Non-x86 world*/
+#else
+int i2c_which_vrm(void)
+{
+	printk(KERN_INFO "i2c-sensor.o: Unknown VRM version of your CPU\n");
+	return 0;
+}
+#endif
+
+EXPORT_SYMBOL(i2c_which_vrm);