diff options
| author | Jean Delvare <khali@linux-fr.org> | 2006-02-05 23:26:51 +0100 |
|---|---|---|
| committer | Greg Kroah-Hartman <gregkh@suse.de> | 2006-03-23 14:21:53 -0800 |
| commit | fabddcd49d8b4fca40ce346f701853888d98b5d2 (patch) | |
| tree | ee3722562be9d1106f3c311dd2e8a84abdcd5bc9 /drivers/hwmon/w83781d.c | |
| parent | 41fc49337d7779eefb6b5e85a8a3cd9e11e9de08 (diff) | |
| download | linux-3.10-fabddcd49d8b4fca40ce346f701853888d98b5d2.tar.gz linux-3.10-fabddcd49d8b4fca40ce346f701853888d98b5d2.tar.bz2 linux-3.10-fabddcd49d8b4fca40ce346f701853888d98b5d2.zip | |
[PATCH] w83781d: Don't reset the chip by default
Stop resetting the chip on load by default, so as to preserve the BIOS
initializations. Same was done in the w83627hf driver some times ago
for the same reasons.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Diffstat (limited to 'drivers/hwmon/w83781d.c')
| -rw-r--r-- | drivers/hwmon/w83781d.c | 22 |
1 files changed, 21 insertions, 1 deletions
diff --git a/drivers/hwmon/w83781d.c b/drivers/hwmon/w83781d.c index 78211781752..8b17132f6b9 100644 --- a/drivers/hwmon/w83781d.c +++ b/drivers/hwmon/w83781d.c @@ -57,6 +57,10 @@ I2C_CLIENT_INSMOD_5(w83781d, w83782d, w83783s, w83627hf, as99127f); I2C_CLIENT_MODULE_PARM(force_subclients, "List of subclient addresses: " "{bus, clientaddr, subclientaddr1, subclientaddr2}"); +static int reset; +module_param(reset, bool, 0); +MODULE_PARM_DESC(reset, "Set to one to reset chip on load"); + static int init = 1; module_param(init, bool, 0); MODULE_PARM_DESC(init, "Set to zero to bypass chip initialization"); @@ -1460,8 +1464,17 @@ w83781d_init_client(struct i2c_client *client) int type = data->type; u8 tmp; - if (init && type != as99127f) { /* this resets registers we don't have + if (reset && type != as99127f) { /* this resets registers we don't have documentation for on the as99127f */ + /* Resetting the chip has been the default for a long time, + but it causes the BIOS initializations (fan clock dividers, + thermal sensor types...) to be lost, so it is now optional. + It might even go away if nobody reports it as being useful, + as I see very little reason why this would be needed at + all. */ + dev_info(&client->dev, "If reset=1 solved a problem you were " + "having, please report!\n"); + /* save these registers */ i = w83781d_read_value(client, W83781D_REG_BEEP_CONFIG); p = w83781d_read_value(client, W83781D_REG_PWMCLK12); @@ -1478,6 +1491,13 @@ w83781d_init_client(struct i2c_client *client) w83781d_write_value(client, W83781D_REG_BEEP_INTS2, 0); } + /* Disable power-on abnormal beep, as advised by the datasheet. + Already done if reset=1. */ + if (init && !reset && type != as99127f) { + i = w83781d_read_value(client, W83781D_REG_BEEP_CONFIG); + w83781d_write_value(client, W83781D_REG_BEEP_CONFIG, i | 0x80); + } + data->vrm = vid_which_vrm(); if ((type != w83781d) && (type != as99127f)) { |